1 files changed, 267 insertions, 61 deletions

diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 930e5d48f56..a3acbac2ee7 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -11,6 +11,7 @@
 #include <linux/clocksource.h>
 #include <linux/percpu.h>
 #include <linux/timex.h>
+#include <linux/static_key.h>
 
 #include <asm/hpet.h>
 #include <asm/timer.h>
@@ -37,13 +38,244 @@ static int __read_mostly tsc_unstable;
    erroneous rdtsc usage on !cpu_has_tsc processors */
 static int __read_mostly tsc_disabled = -1;
 
+static struct static_key __use_tsc = STATIC_KEY_INIT;
+
 int tsc_clocksource_reliable;
+
+/*
+ * Use a ring-buffer like data structure, where a writer advances the head by
+ * writing a new data entry and a reader advances the tail when it observes a
+ * new entry.
+ *
+ * Writers are made to wait on readers until there's space to write a new
+ * entry.
+ *
+ * This means that we can always use an {offset, mul} pair to compute a ns
+ * value that is 'roughly' in the right direction, even if we're writing a new
+ * {offset, mul} pair during the clock read.
+ *
+ * The down-side is that we can no longer guarantee strict monotonicity anymore
+ * (assuming the TSC was that to begin with), because while we compute the
+ * intersection point of the two clock slopes and make sure the time is
+ * continuous at the point of switching; we can no longer guarantee a reader is
+ * strictly before or after the switch point.
+ *
+ * It does mean a reader no longer needs to disable IRQs in order to avoid
+ * CPU-Freq updates messing with his times, and similarly an NMI reader will
+ * no longer run the risk of hitting half-written state.
+ */
+
+struct cyc2ns {
+	struct cyc2ns_data data[2];	/*  0 + 2*24 = 48 */
+	struct cyc2ns_data *head;	/* 48 + 8    = 56 */
+	struct cyc2ns_data *tail;	/* 56 + 8    = 64 */
+}; /* exactly fits one cacheline */
+
+static DEFINE_PER_CPU_ALIGNED(struct cyc2ns, cyc2ns);
+
+struct cyc2ns_data *cyc2ns_read_begin(void)
+{
+	struct cyc2ns_data *head;
+
+	preempt_disable();
+
+	head = this_cpu_read(cyc2ns.head);
+	/*
+	 * Ensure we observe the entry when we observe the pointer to it.
+	 * matches the wmb from cyc2ns_write_end().
+	 */
+	smp_read_barrier_depends();
+	head->__count++;
+	barrier();
+
+	return head;
+}
+
+void cyc2ns_read_end(struct cyc2ns_data *head)
+{
+	barrier();
+	/*
+	 * If we're the outer most nested read; update the tail pointer
+	 * when we're done. This notifies possible pending writers
+	 * that we've observed the head pointer and that the other
+	 * entry is now free.
+	 */
+	if (!--head->__count) {
+		/*
+		 * x86-TSO does not reorder writes with older reads;
+		 * therefore once this write becomes visible to another
+		 * cpu, we must be finished reading the cyc2ns_data.
+		 *
+		 * matches with cyc2ns_write_begin().
+		 */
+		this_cpu_write(cyc2ns.tail, head);
+	}
+	preempt_enable();
+}
+
+/*
+ * Begin writing a new @data entry for @cpu.
+ *
+ * Assumes some sort of write side lock; currently 'provided' by the assumption
+ * that cpufreq will call its notifiers sequentially.
+ */
+static struct cyc2ns_data *cyc2ns_write_begin(int cpu)
+{
+	struct cyc2ns *c2n = &per_cpu(cyc2ns, cpu);
+	struct cyc2ns_data *data = c2n->data;
+
+	if (data == c2n->head)
+		data++;
+
+	/* XXX send an IPI to @cpu in order to guarantee a read? */
+
+	/*
+	 * When we observe the tail write from cyc2ns_read_end(),
+	 * the cpu must be done with that entry and its safe
+	 * to start writing to it.
+	 */
+	while (c2n->tail == data)
+		cpu_relax();
+
+	return data;
+}
+
+static void cyc2ns_write_end(int cpu, struct cyc2ns_data *data)
+{
+	struct cyc2ns *c2n = &per_cpu(cyc2ns, cpu);
+
+	/*
+	 * Ensure the @data writes are visible before we publish the
+	 * entry. Matches the data-depencency in cyc2ns_read_begin().
+	 */
+	smp_wmb();
+
+	ACCESS_ONCE(c2n->head) = data;
+}
+
+/*
+ * Accelerators for sched_clock()
+ * convert from cycles(64bits) => nanoseconds (64bits)
+ *  basic equation:
+ *              ns = cycles / (freq / ns_per_sec)
+ *              ns = cycles * (ns_per_sec / freq)
+ *              ns = cycles * (10^9 / (cpu_khz * 10^3))
+ *              ns = cycles * (10^6 / cpu_khz)
+ *
+ *      Then we use scaling math (suggested by george@mvista.com) to get:
+ *              ns = cycles * (10^6 * SC / cpu_khz) / SC
+ *              ns = cycles * cyc2ns_scale / SC
+ *
+ *      And since SC is a constant power of two, we can convert the div
+ *  into a shift.
+ *
+ *  We can use khz divisor instead of mhz to keep a better precision, since
+ *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
+ *  (mathieu.desnoyers@polymtl.ca)
+ *
+ *                      -johnstul@us.ibm.com "math is hard, lets go shopping!"
+ */
+
+#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
+
+static void cyc2ns_data_init(struct cyc2ns_data *data)
+{
+	data->cyc2ns_mul = 1U << CYC2NS_SCALE_FACTOR;
+	data->cyc2ns_shift = CYC2NS_SCALE_FACTOR;
+	data->cyc2ns_offset = 0;
+	data->__count = 0;
+}
+
+static void cyc2ns_init(int cpu)
+{
+	struct cyc2ns *c2n = &per_cpu(cyc2ns, cpu);
+
+	cyc2ns_data_init(&c2n->data[0]);
+	cyc2ns_data_init(&c2n->data[1]);
+
+	c2n->head = c2n->data;
+	c2n->tail = c2n->data;
+}
+
+static inline unsigned long long cycles_2_ns(unsigned long long cyc)
+{
+	struct cyc2ns_data *data, *tail;
+	unsigned long long ns;
+
+	/*
+	 * See cyc2ns_read_*() for details; replicated in order to avoid
+	 * an extra few instructions that came with the abstraction.
+	 * Notable, it allows us to only do the __count and tail update
+	 * dance when its actually needed.
+	 */
+
+	preempt_disable();
+	data = this_cpu_read(cyc2ns.head);
+	tail = this_cpu_read(cyc2ns.tail);
+
+	if (likely(data == tail)) {
+		ns = data->cyc2ns_offset;
+		ns += mul_u64_u32_shr(cyc, data->cyc2ns_mul, CYC2NS_SCALE_FACTOR);
+	} else {
+		data->__count++;
+
+		barrier();
+
+		ns = data->cyc2ns_offset;
+		ns += mul_u64_u32_shr(cyc, data->cyc2ns_mul, CYC2NS_SCALE_FACTOR);
+
+		barrier();
+
+		if (!--data->__count)
+			this_cpu_write(cyc2ns.tail, data);
+	}
+	preempt_enable();
+
+	return ns;
+}
+
+/* XXX surely we already have this someplace in the kernel?! */
+#define DIV_ROUND(n, d) (((n) + ((d) / 2)) / (d))
+
+static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
+{
+	unsigned long long tsc_now, ns_now;
+	struct cyc2ns_data *data;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	sched_clock_idle_sleep_event();
+
+	if (!cpu_khz)
+		goto done;
+
+	data = cyc2ns_write_begin(cpu);
+
+	rdtscll(tsc_now);
+	ns_now = cycles_2_ns(tsc_now);
+
+	/*
+	 * Compute a new multiplier as per the above comment and ensure our
+	 * time function is continuous; see the comment near struct
+	 * cyc2ns_data.
+	 */
+	data->cyc2ns_mul = DIV_ROUND(NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR, cpu_khz);
+	data->cyc2ns_shift = CYC2NS_SCALE_FACTOR;
+	data->cyc2ns_offset = ns_now -
+		mul_u64_u32_shr(tsc_now, data->cyc2ns_mul, CYC2NS_SCALE_FACTOR);
+
+	cyc2ns_write_end(cpu, data);
+
+done:
+	sched_clock_idle_wakeup_event(0);
+	local_irq_restore(flags);
+}
 /*
  * Scheduler clock - returns current time in nanosec units.
  */
 u64 native_sched_clock(void)
 {
-	u64 this_offset;
+	u64 tsc_now;
 
 	/*
 	 * Fall back to jiffies if there's no TSC available:
@@ -53,16 +285,16 @@ u64 native_sched_clock(void)
 	 *   very important for it to be as fast as the platform
 	 *   can achieve it. )
 	 */
-	if (unlikely(tsc_disabled)) {
+	if (!static_key_false(&__use_tsc)) {
 		/* No locking but a rare wrong value is not a big deal: */
 		return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);
 	}
 
 	/* read the Time Stamp Counter: */
-	rdtscll(this_offset);
+	rdtscll(tsc_now);
 
 	/* return the value in ns */
-	return __cycles_2_ns(this_offset);
+	return cycles_2_ns(tsc_now);
 }
 
 /* We need to define a real function for sched_clock, to override the
@@ -419,6 +651,16 @@ unsigned long native_calibrate_tsc(void)
 	unsigned long flags, latch, ms, fast_calibrate;
 	int hpet = is_hpet_enabled(), i, loopmin;
 
+	/* Calibrate TSC using MSR for Intel Atom SoCs */
+	local_irq_save(flags);
+	i = try_msr_calibrate_tsc(&fast_calibrate);
+	local_irq_restore(flags);
+	if (i >= 0) {
+		if (i == 0)
+			pr_warn("Fast TSC calibration using MSR failed\n");
+		return fast_calibrate;
+	}
+
 	local_irq_save(flags);
 	fast_calibrate = quick_pit_calibrate();
 	local_irq_restore(flags);
@@ -589,61 +831,11 @@ int recalibrate_cpu_khz(void)
 EXPORT_SYMBOL(recalibrate_cpu_khz);
 
 
-/* Accelerators for sched_clock()
- * convert from cycles(64bits) => nanoseconds (64bits)
- *  basic equation:
- *              ns = cycles / (freq / ns_per_sec)
- *              ns = cycles * (ns_per_sec / freq)
- *              ns = cycles * (10^9 / (cpu_khz * 10^3))
- *              ns = cycles * (10^6 / cpu_khz)
- *
- *      Then we use scaling math (suggested by george@mvista.com) to get:
- *              ns = cycles * (10^6 * SC / cpu_khz) / SC
- *              ns = cycles * cyc2ns_scale / SC
- *
- *      And since SC is a constant power of two, we can convert the div
- *  into a shift.
- *
- *  We can use khz divisor instead of mhz to keep a better precision, since
- *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
- *  (mathieu.desnoyers@polymtl.ca)
- *
- *                      -johnstul@us.ibm.com "math is hard, lets go shopping!"
- */
-
-DEFINE_PER_CPU(unsigned long, cyc2ns);
-DEFINE_PER_CPU(unsigned long long, cyc2ns_offset);
-
-static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
-{
-	unsigned long long tsc_now, ns_now, *offset;
-	unsigned long flags, *scale;
-
-	local_irq_save(flags);
-	sched_clock_idle_sleep_event();
-
-	scale = &per_cpu(cyc2ns, cpu);
-	offset = &per_cpu(cyc2ns_offset, cpu);
-
-	rdtscll(tsc_now);
-	ns_now = __cycles_2_ns(tsc_now);
-
-	if (cpu_khz) {
-		*scale = ((NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR) +
-				cpu_khz / 2) / cpu_khz;
-		*offset = ns_now - mult_frac(tsc_now, *scale,
-					     (1UL << CYC2NS_SCALE_FACTOR));
-	}
-
-	sched_clock_idle_wakeup_event(0);
-	local_irq_restore(flags);
-}
-
 static unsigned long long cyc2ns_suspend;
 
 void tsc_save_sched_clock_state(void)
 {
-	if (!sched_clock_stable)
+	if (!sched_clock_stable())
 		return;
 
 	cyc2ns_suspend = sched_clock();
@@ -663,16 +855,26 @@ void tsc_restore_sched_clock_state(void)
 	unsigned long flags;
 	int cpu;
 
-	if (!sched_clock_stable)
+	if (!sched_clock_stable())
 		return;
 
 	local_irq_save(flags);
 
-	__this_cpu_write(cyc2ns_offset, 0);
+	/*
+	 * We're comming out of suspend, there's no concurrency yet; don't
+	 * bother being nice about the RCU stuff, just write to both
+	 * data fields.
+	 */
+
+	this_cpu_write(cyc2ns.data[0].cyc2ns_offset, 0);
+	this_cpu_write(cyc2ns.data[1].cyc2ns_offset, 0);
+
 	offset = cyc2ns_suspend - sched_clock();
 
-	for_each_possible_cpu(cpu)
-		per_cpu(cyc2ns_offset, cpu) = offset;
+	for_each_possible_cpu(cpu) {
+		per_cpu(cyc2ns.data[0].cyc2ns_offset, cpu) = offset;
+		per_cpu(cyc2ns.data[1].cyc2ns_offset, cpu) = offset;
+	}
 
 	local_irq_restore(flags);
 }
@@ -795,7 +997,7 @@ void mark_tsc_unstable(char *reason)
 {
 	if (!tsc_unstable) {
 		tsc_unstable = 1;
-		sched_clock_stable = 0;
+		clear_sched_clock_stable();
 		disable_sched_clock_irqtime();
 		pr_info("Marking TSC unstable due to %s\n", reason);
 		/* Change only the rating, when not registered */
@@ -995,14 +1197,18 @@ void __init tsc_init(void)
 	 * speed as the bootup CPU. (cpufreq notifiers will fix this
 	 * up if their speed diverges)
 	 */
-	for_each_possible_cpu(cpu)
+	for_each_possible_cpu(cpu) {
+		cyc2ns_init(cpu);
 		set_cyc2ns_scale(cpu_khz, cpu);
+	}
 
 	if (tsc_disabled > 0)
 		return;
 
 	/* now allow native_sched_clock() to use rdtsc */
+
 	tsc_disabled = 0;
+	static_key_slow_inc(&__use_tsc);
 
 	if (!no_sched_irq_time)
 		enable_sched_clock_irqtime();