diff options
Diffstat (limited to 'arch/x86/kernel')
| -rw-r--r-- | arch/x86/kernel/Makefile | 1 | ||||
| -rw-r--r-- | arch/x86/kernel/kgdb.c | 417 |
2 files changed, 418 insertions, 0 deletions
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 4eb5ce84110..4a4260c7f67 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -66,6 +66,7 @@ obj-$(CONFIG_MODULES) += module_$(BITS).o obj-$(CONFIG_ACPI_SRAT) += srat_32.o obj-$(CONFIG_EFI) += efi.o efi_$(BITS).o efi_stub_$(BITS).o obj-$(CONFIG_DOUBLEFAULT) += doublefault_32.o +obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_VM86) += vm86_32.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c new file mode 100644 index 00000000000..37194d6374d --- /dev/null +++ b/arch/x86/kernel/kgdb.c @@ -0,0 +1,417 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + */ + +/* + * Copyright (C) 2004 Amit S. Kale <amitkale@linsyssoft.com> + * Copyright (C) 2000-2001 VERITAS Software Corporation. + * Copyright (C) 2002 Andi Kleen, SuSE Labs + * Copyright (C) 2004 LinSysSoft Technologies Pvt. Ltd. + * Copyright (C) 2007 MontaVista Software, Inc. + * Copyright (C) 2007-2008 Jason Wessel, Wind River Systems, Inc. + */ +/**************************************************************************** + * Contributor: Lake Stevens Instrument Division$ + * Written by: Glenn Engel $ + * Updated by: Amit Kale<akale@veritas.com> + * Updated by: Tom Rini <trini@kernel.crashing.org> + * Updated by: Jason Wessel <jason.wessel@windriver.com> + * Modified for 386 by Jim Kingdon, Cygnus Support. + * Origianl kgdb, compatibility with 2.1.xx kernel by + * David Grothe <dave@gcom.com> + * Integrated into 2.2.5 kernel by Tigran Aivazian <tigran@sco.com> + * X86_64 changes from Andi Kleen's patch merged by Jim Houston + */ +#include <linux/spinlock.h> +#include <linux/kdebug.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/ptrace.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/kgdb.h> +#include <linux/init.h> +#include <linux/smp.h> + +#include <asm/apicdef.h> +#include <asm/system.h> + +#ifdef CONFIG_X86_32 +# include <mach_ipi.h> +#else +# include <asm/mach_apic.h> +#endif + +/* + * Put the error code here just in case the user cares: + */ +static int gdb_x86errcode; + +/* + * Likewise, the vector number here (since GDB only gets the signal + * number through the usual means, and that's not very specific): + */ +static int gdb_x86vector = -1; + +/** + * pt_regs_to_gdb_regs - Convert ptrace regs to GDB regs + * @gdb_regs: A pointer to hold the registers in the order GDB wants. + * @regs: The &struct pt_regs of the current process. + * + * Convert the pt_regs in @regs into the format for registers that + * GDB expects, stored in @gdb_regs. + */ +void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) +{ + gdb_regs[GDB_AX] = regs->ax; + gdb_regs[GDB_BX] = regs->bx; + gdb_regs[GDB_CX] = regs->cx; + gdb_regs[GDB_DX] = regs->dx; + gdb_regs[GDB_SI] = regs->si; + gdb_regs[GDB_DI] = regs->di; + gdb_regs[GDB_BP] = regs->bp; + gdb_regs[GDB_PS] = regs->flags; + gdb_regs[GDB_PC] = regs->ip; +#ifdef CONFIG_X86_32 + gdb_regs[GDB_DS] = regs->ds; + gdb_regs[GDB_ES] = regs->es; + gdb_regs[GDB_CS] = regs->cs; + gdb_regs[GDB_SS] = __KERNEL_DS; + gdb_regs[GDB_FS] = 0xFFFF; + gdb_regs[GDB_GS] = 0xFFFF; +#else + gdb_regs[GDB_R8] = regs->r8; + gdb_regs[GDB_R9] = regs->r9; + gdb_regs[GDB_R10] = regs->r10; + gdb_regs[GDB_R11] = regs->r11; + gdb_regs[GDB_R12] = regs->r12; + gdb_regs[GDB_R13] = regs->r13; + gdb_regs[GDB_R14] = regs->r14; + gdb_regs[GDB_R15] = regs->r15; +#endif + gdb_regs[GDB_SP] = regs->sp; +} + +/** + * sleeping_thread_to_gdb_regs - Convert ptrace regs to GDB regs + * @gdb_regs: A pointer to hold the registers in the order GDB wants. + * @p: The &struct task_struct of the desired process. + * + * Convert the register values of the sleeping process in @p to + * the format that GDB expects. + * This function is called when kgdb does not have access to the + * &struct pt_regs and therefore it should fill the gdb registers + * @gdb_regs with what has been saved in &struct thread_struct + * thread field during switch_to. + */ +void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) +{ + gdb_regs[GDB_AX] = 0; + gdb_regs[GDB_BX] = 0; + gdb_regs[GDB_CX] = 0; + gdb_regs[GDB_DX] = 0; + gdb_regs[GDB_SI] = 0; + gdb_regs[GDB_DI] = 0; + gdb_regs[GDB_BP] = *(unsigned long *)p->thread.sp; +#ifdef CONFIG_X86_32 + gdb_regs[GDB_DS] = __KERNEL_DS; + gdb_regs[GDB_ES] = __KERNEL_DS; + gdb_regs[GDB_PS] = 0; + gdb_regs[GDB_CS] = __KERNEL_CS; + gdb_regs[GDB_PC] = p->thread.ip; + gdb_regs[GDB_SS] = __KERNEL_DS; + gdb_regs[GDB_FS] = 0xFFFF; + gdb_regs[GDB_GS] = 0xFFFF; +#else + gdb_regs[GDB_PS] = *(unsigned long *)(p->thread.sp + 8); + gdb_regs[GDB_PC] = 0; + gdb_regs[GDB_R8] = 0; + gdb_regs[GDB_R9] = 0; + gdb_regs[GDB_R10] = 0; + gdb_regs[GDB_R11] = 0; + gdb_regs[GDB_R12] = 0; + gdb_regs[GDB_R13] = 0; + gdb_regs[GDB_R14] = 0; + gdb_regs[GDB_R15] = 0; +#endif + gdb_regs[GDB_SP] = p->thread.sp; +} + +/** + * gdb_regs_to_pt_regs - Convert GDB regs to ptrace regs. + * @gdb_regs: A pointer to hold the registers we've received from GDB. + * @regs: A pointer to a &struct pt_regs to hold these values in. + * + * Convert the GDB regs in @gdb_regs into the pt_regs, and store them + * in @regs. + */ +void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) +{ + regs->ax = gdb_regs[GDB_AX]; + regs->bx = gdb_regs[GDB_BX]; + regs->cx = gdb_regs[GDB_CX]; + regs->dx = gdb_regs[GDB_DX]; + regs->si = gdb_regs[GDB_SI]; + regs->di = gdb_regs[GDB_DI]; + regs->bp = gdb_regs[GDB_BP]; + regs->flags = gdb_regs[GDB_PS]; + regs->ip = gdb_regs[GDB_PC]; +#ifdef CONFIG_X86_32 + regs->ds = gdb_regs[GDB_DS]; + regs->es = gdb_regs[GDB_ES]; + regs->cs = gdb_regs[GDB_CS]; +#else + regs->r8 = gdb_regs[GDB_R8]; + regs->r9 = gdb_regs[GDB_R9]; + regs->r10 = gdb_regs[GDB_R10]; + regs->r11 = gdb_regs[GDB_R11]; + regs->r12 = gdb_regs[GDB_R12]; + regs->r13 = gdb_regs[GDB_R13]; + regs->r14 = gdb_regs[GDB_R14]; + regs->r15 = gdb_regs[GDB_R15]; +#endif +} + +/** + * kgdb_post_primary_code - Save error vector/code numbers. + * @regs: Original pt_regs. + * @e_vector: Original error vector. + * @err_code: Original error code. + * + * This is needed on architectures which support SMP and KGDB. + * This function is called after all the slave cpus have been put + * to a know spin state and the primary CPU has control over KGDB. + */ +void kgdb_post_primary_code(struct pt_regs *regs, int e_vector, int err_code) +{ + /* primary processor is completely in the debugger */ + gdb_x86vector = e_vector; + gdb_x86errcode = err_code; +} + +#ifdef CONFIG_SMP +/** + * kgdb_roundup_cpus - Get other CPUs into a holding pattern + * @flags: Current IRQ state + * + * On SMP systems, we need to get the attention of the other CPUs + * and get them be in a known state. This should do what is needed + * to get the other CPUs to call kgdb_wait(). Note that on some arches, + * the NMI approach is not used for rounding up all the CPUs. For example, + * in case of MIPS, smp_call_function() is used to roundup CPUs. In + * this case, we have to make sure that interrupts are enabled before + * calling smp_call_function(). The argument to this function is + * the flags that will be used when restoring the interrupts. There is + * local_irq_save() call before kgdb_roundup_cpus(). + * + * On non-SMP systems, this is not called. + */ +void kgdb_roundup_cpus(unsigned long flags) +{ + send_IPI_allbutself(APIC_DM_NMI); +} +#endif + +/** + * kgdb_arch_handle_exception - Handle architecture specific GDB packets. + * @vector: The error vector of the exception that happened. + * @signo: The signal number of the exception that happened. + * @err_code: The error code of the exception that happened. + * @remcom_in_buffer: The buffer of the packet we have read. + * @remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into. + * @regs: The &struct pt_regs of the current process. + * + * This function MUST handle the 'c' and 's' command packets, + * as well packets to set / remove a hardware breakpoint, if used. + * If there are additional packets which the hardware needs to handle, + * they are handled here. The code should return -1 if it wants to + * process more packets, and a %0 or %1 if it wants to exit from the + * kgdb callback. + */ +int kgdb_arch_handle_exception(int e_vector, int signo, int err_code, + char *remcomInBuffer, char *remcomOutBuffer, + struct pt_regs *linux_regs) +{ + unsigned long addr; + char *ptr; + int newPC; + + switch (remcomInBuffer[0]) { + case 'c': + case 's': + /* try to read optional parameter, pc unchanged if no parm */ + ptr = &remcomInBuffer[1]; + if (kgdb_hex2long(&ptr, &addr)) + linux_regs->ip = addr; + newPC = linux_regs->ip; + + /* clear the trace bit */ + linux_regs->flags &= ~TF_MASK; + atomic_set(&kgdb_cpu_doing_single_step, -1); + + /* set the trace bit if we're stepping */ + if (remcomInBuffer[0] == 's') { + linux_regs->flags |= TF_MASK; + kgdb_single_step = 1; + if (kgdb_contthread) { + atomic_set(&kgdb_cpu_doing_single_step, + raw_smp_processor_id()); + } + } + + return 0; + } + + /* this means that we do not want to exit from the handler: */ + return -1; +} + +static inline int +single_step_cont(struct pt_regs *regs, struct die_args *args) +{ + /* + * Single step exception from kernel space to user space so + * eat the exception and continue the process: + */ + printk(KERN_ERR "KGDB: trap/step from kernel to user space, " + "resuming...\n"); + kgdb_arch_handle_exception(args->trapnr, args->signr, + args->err, "c", "", regs); + + return NOTIFY_STOP; +} + +static int __kgdb_notify(struct die_args *args, unsigned long cmd) +{ + struct pt_regs *regs = args->regs; + + switch (cmd) { + case DIE_NMI: + if (atomic_read(&kgdb_active) != -1) { + /* KGDB CPU roundup */ + kgdb_nmicallback(raw_smp_processor_id(), regs); + return NOTIFY_STOP; + } + return NOTIFY_DONE; + + case DIE_NMI_IPI: + if (atomic_read(&kgdb_active) != -1) { + /* KGDB CPU roundup: */ + if (kgdb_nmicallback(raw_smp_processor_id(), regs)) + return NOTIFY_DONE; + return NOTIFY_STOP; + } + return NOTIFY_DONE; + + case DIE_NMIWATCHDOG: + if (atomic_read(&kgdb_active) != -1) { + /* KGDB CPU roundup: */ + kgdb_nmicallback(raw_smp_processor_id(), regs); + return NOTIFY_STOP; + } + /* Enter debugger: */ + break; + + case DIE_DEBUG: + if (atomic_read(&kgdb_cpu_doing_single_step) == + raw_smp_processor_id() && + user_mode(regs)) + return single_step_cont(regs, args); + /* fall through */ + default: + if (user_mode(regs)) + return NOTIFY_DONE; + } + + if (kgdb_handle_exception(args->trapnr, args->signr, args->err, regs)) + return NOTIFY_DONE; + + return NOTIFY_STOP; +} + +static int +kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + ret = __kgdb_notify(ptr, cmd); + local_irq_restore(flags); + + return ret; +} + +static struct notifier_block kgdb_notifier = { + .notifier_call = kgdb_notify, + + /* + * Lowest-prio notifier priority, we want to be notified last: + */ + .priority = -INT_MAX, +}; + +/** + * kgdb_arch_init - Perform any architecture specific initalization. + * + * This function will handle the initalization of any architecture + * specific callbacks. + */ +int kgdb_arch_init(void) +{ + return register_die_notifier(&kgdb_notifier); +} + +/** + * kgdb_arch_exit - Perform any architecture specific uninitalization. + * + * This function will handle the uninitalization of any architecture + * specific callbacks, for dynamic registration and unregistration. + */ +void kgdb_arch_exit(void) +{ + unregister_die_notifier(&kgdb_notifier); +} + +/** + * + * kgdb_skipexception - Bail out of KGDB when we've been triggered. + * @exception: Exception vector number + * @regs: Current &struct pt_regs. + * + * On some architectures we need to skip a breakpoint exception when + * it occurs after a breakpoint has been removed. + * + * Skip an int3 exception when it occurs after a breakpoint has been + * removed. Backtrack eip by 1 since the int3 would have caused it to + * increment by 1. + */ +int kgdb_skipexception(int exception, struct pt_regs *regs) +{ + if (exception == 3 && kgdb_isremovedbreak(regs->ip - 1)) { + regs->ip -= 1; + return 1; + } + return 0; +} + +unsigned long kgdb_arch_pc(int exception, struct pt_regs *regs) +{ + if (exception == 3) + return instruction_pointer(regs) - 1; + return instruction_pointer(regs); +} + +struct kgdb_arch arch_kgdb_ops = { + /* Breakpoint instruction: */ + .gdb_bpt_instr = { 0xcc }, +}; |