diff options
Diffstat (limited to 'arch/x86/kernel')
61 files changed, 428 insertions, 438 deletions
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 62445ba2f8a..7338ef2218b 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -41,13 +41,13 @@ obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o obj-y += bootflag.o e820.o -obj-y += pci-dma.o quirks.o i8237.o topology.o kdebugfs.o +obj-y += pci-dma.o quirks.o topology.o kdebugfs.o obj-y += alternative.o i8253.o pci-nommu.o hw_breakpoint.o obj-y += tsc.o io_delay.o rtc.o obj-y += pci-iommu_table.o obj-y += resource.o -obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o +obj-y += trampoline.o trampoline_$(BITS).o obj-y += process.o obj-y += i387.o xsave.o obj-y += ptrace.o @@ -55,10 +55,12 @@ obj-$(CONFIG_X86_32) += tls.o obj-$(CONFIG_IA32_EMULATION) += tls.o obj-y += step.o obj-$(CONFIG_INTEL_TXT) += tboot.o +obj-$(CONFIG_ISA_DMA_API) += i8237.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-y += cpu/ obj-y += acpi/ obj-y += reboot.o +obj-$(CONFIG_X86_32) += reboot_32.o obj-$(CONFIG_MCA) += mca_32.o obj-$(CONFIG_X86_MSR) += msr.o obj-$(CONFIG_X86_CPUID) += cpuid.o @@ -69,7 +71,6 @@ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SMP) += smpboot.o obj-$(CONFIG_SMP) += tsc_sync.o obj-$(CONFIG_SMP) += setup_percpu.o -obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_$(BITS).o obj-$(CONFIG_X86_MPPARSE) += mpparse.o obj-y += apic/ obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S index 28595d6df47..ead21b66311 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.S +++ b/arch/x86/kernel/acpi/realmode/wakeup.S @@ -6,11 +6,17 @@ #include <asm/page_types.h> #include <asm/pgtable_types.h> #include <asm/processor-flags.h> +#include "wakeup.h" .code16 - .section ".header", "a" + .section ".jump", "ax" + .globl _start +_start: + cli + jmp wakeup_code /* This should match the structure in wakeup.h */ + .section ".header", "a" .globl wakeup_header wakeup_header: video_mode: .short 0 /* Video mode number */ @@ -30,14 +36,11 @@ wakeup_jmp: .byte 0xea /* ljmpw */ wakeup_jmp_off: .word 3f wakeup_jmp_seg: .word 0 wakeup_gdt: .quad 0, 0, 0 -signature: .long 0x51ee1111 +signature: .long WAKEUP_HEADER_SIGNATURE .text - .globl _start .code16 wakeup_code: -_start: - cli cld /* Apparently some dimwit BIOS programmers don't know how to @@ -77,12 +80,12 @@ _start: /* Check header signature... */ movl signature, %eax - cmpl $0x51ee1111, %eax + cmpl $WAKEUP_HEADER_SIGNATURE, %eax jne bogus_real_magic /* Check we really have everything... */ movl end_signature, %eax - cmpl $0x65a22c82, %eax + cmpl $WAKEUP_END_SIGNATURE, %eax jne bogus_real_magic /* Call the C code */ @@ -147,3 +150,7 @@ wakeup_heap: wakeup_stack: .space 2048 wakeup_stack_end: + + .section ".signature","a" +end_signature: + .long WAKEUP_END_SIGNATURE diff --git a/arch/x86/kernel/acpi/realmode/wakeup.h b/arch/x86/kernel/acpi/realmode/wakeup.h index 69d38d0b2b6..e1828c07e79 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.h +++ b/arch/x86/kernel/acpi/realmode/wakeup.h @@ -35,7 +35,8 @@ struct wakeup_header { extern struct wakeup_header wakeup_header; #endif -#define HEADER_OFFSET 0x3f00 -#define WAKEUP_SIZE 0x4000 +#define WAKEUP_HEADER_OFFSET 8 +#define WAKEUP_HEADER_SIGNATURE 0x51ee1111 +#define WAKEUP_END_SIGNATURE 0x65a22c82 #endif /* ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H */ diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S index 060fff8f5c5..d4f8010a5b1 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.lds.S +++ b/arch/x86/kernel/acpi/realmode/wakeup.lds.S @@ -13,9 +13,19 @@ ENTRY(_start) SECTIONS { . = 0; + .jump : { + *(.jump) + } = 0x90909090 + + . = WAKEUP_HEADER_OFFSET; + .header : { + *(.header) + } + + . = ALIGN(16); .text : { *(.text*) - } + } = 0x90909090 . = ALIGN(16); .rodata : { @@ -33,11 +43,6 @@ SECTIONS *(.data*) } - .signature : { - end_signature = .; - LONG(0x65a22c82) - } - . = ALIGN(16); .bss : { __bss_start = .; @@ -45,20 +50,13 @@ SECTIONS __bss_end = .; } - . = HEADER_OFFSET; - .header : { - *(.header) + .signature : { + *(.signature) } - . = ALIGN(16); _end = .; /DISCARD/ : { *(.note*) } - - /* - * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility: - */ - . = ASSERT(_end <= WAKEUP_SIZE, "Wakeup too big!"); } diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 68d1537b8c8..ff93bc1b09c 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -18,37 +18,28 @@ #include "realmode/wakeup.h" #include "sleep.h" -unsigned long acpi_wakeup_address; unsigned long acpi_realmode_flags; -/* address in low memory of the wakeup routine. */ -static unsigned long acpi_realmode; - #if defined(CONFIG_SMP) && defined(CONFIG_64BIT) static char temp_stack[4096]; #endif /** - * acpi_save_state_mem - save kernel state + * acpi_suspend_lowlevel - save kernel state * * Create an identity mapped page table and copy the wakeup routine to * low memory. - * - * Note that this is too late to change acpi_wakeup_address. */ -int acpi_save_state_mem(void) +int acpi_suspend_lowlevel(void) { struct wakeup_header *header; + /* address in low memory of the wakeup routine. */ + char *acpi_realmode; - if (!acpi_realmode) { - printk(KERN_ERR "Could not allocate memory during boot, " - "S3 disabled\n"); - return -ENOMEM; - } - memcpy((void *)acpi_realmode, &wakeup_code_start, WAKEUP_SIZE); + acpi_realmode = TRAMPOLINE_SYM(acpi_wakeup_code); - header = (struct wakeup_header *)(acpi_realmode + HEADER_OFFSET); - if (header->signature != 0x51ee1111) { + header = (struct wakeup_header *)(acpi_realmode + WAKEUP_HEADER_OFFSET); + if (header->signature != WAKEUP_HEADER_SIGNATURE) { printk(KERN_ERR "wakeup header does not match\n"); return -EINVAL; } @@ -68,9 +59,7 @@ int acpi_save_state_mem(void) /* GDT[0]: GDT self-pointer */ header->wakeup_gdt[0] = (u64)(sizeof(header->wakeup_gdt) - 1) + - ((u64)(acpi_wakeup_address + - ((char *)&header->wakeup_gdt - (char *)acpi_realmode)) - << 16); + ((u64)__pa(&header->wakeup_gdt) << 16); /* GDT[1]: big real mode-like code segment */ header->wakeup_gdt[1] = GDT_ENTRY(0x809b, acpi_wakeup_address, 0xfffff); @@ -96,7 +85,7 @@ int acpi_save_state_mem(void) header->pmode_cr3 = (u32)__pa(&initial_page_table); saved_magic = 0x12345678; #else /* CONFIG_64BIT */ - header->trampoline_segment = setup_trampoline() >> 4; + header->trampoline_segment = trampoline_address() >> 4; #ifdef CONFIG_SMP stack_start = (unsigned long)temp_stack + sizeof(temp_stack); early_gdt_descr.address = @@ -107,56 +96,10 @@ int acpi_save_state_mem(void) saved_magic = 0x123456789abcdef0L; #endif /* CONFIG_64BIT */ + do_suspend_lowlevel(); return 0; } -/* - * acpi_restore_state - undo effects of acpi_save_state_mem - */ -void acpi_restore_state_mem(void) -{ -} - - -/** - * acpi_reserve_wakeup_memory - do _very_ early ACPI initialisation - * - * We allocate a page from the first 1MB of memory for the wakeup - * routine for when we come back from a sleep state. The - * runtime allocator allows specification of <16MB pages, but not - * <1MB pages. - */ -void __init acpi_reserve_wakeup_memory(void) -{ - phys_addr_t mem; - - if ((&wakeup_code_end - &wakeup_code_start) > WAKEUP_SIZE) { - printk(KERN_ERR - "ACPI: Wakeup code way too big, S3 disabled.\n"); - return; - } - - mem = memblock_find_in_range(0, 1<<20, WAKEUP_SIZE, PAGE_SIZE); - - if (mem == MEMBLOCK_ERROR) { - printk(KERN_ERR "ACPI: Cannot allocate lowmem, S3 disabled.\n"); - return; - } - acpi_realmode = (unsigned long) phys_to_virt(mem); - acpi_wakeup_address = mem; - memblock_x86_reserve_range(mem, mem + WAKEUP_SIZE, "ACPI WAKEUP"); -} - -int __init acpi_configure_wakeup_memory(void) -{ - if (acpi_realmode) - set_memory_x(acpi_realmode, WAKEUP_SIZE >> PAGE_SHIFT); - - return 0; -} -arch_initcall(acpi_configure_wakeup_memory); - - static int __init acpi_sleep_setup(char *str) { while ((str != NULL) && (*str != '\0')) { diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h index adbcbaa6f1d..416d4be13fe 100644 --- a/arch/x86/kernel/acpi/sleep.h +++ b/arch/x86/kernel/acpi/sleep.h @@ -4,13 +4,12 @@ #include <asm/trampoline.h> -extern char wakeup_code_start, wakeup_code_end; - extern unsigned long saved_video_mode; extern long saved_magic; extern int wakeup_pmode_return; -extern char swsusp_pg_dir[PAGE_SIZE]; extern unsigned long acpi_copy_wakeup_routine(unsigned long); extern void wakeup_long64(void); + +extern void do_suspend_lowlevel(void); diff --git a/arch/x86/kernel/acpi/wakeup_rm.S b/arch/x86/kernel/acpi/wakeup_rm.S index 6ff3b573057..63b8ab524f2 100644 --- a/arch/x86/kernel/acpi/wakeup_rm.S +++ b/arch/x86/kernel/acpi/wakeup_rm.S @@ -2,9 +2,11 @@ * Wrapper script for the realmode binary as a transport object * before copying to low memory. */ - .section ".rodata","a" - .globl wakeup_code_start, wakeup_code_end -wakeup_code_start: +#include <asm/page_types.h> + + .section ".x86_trampoline","a" + .balign PAGE_SIZE + .globl acpi_wakeup_code +acpi_wakeup_code: .incbin "arch/x86/kernel/acpi/realmode/wakeup.bin" -wakeup_code_end: - .size wakeup_code_start, .-wakeup_code_start + .size acpi_wakeup_code, .-acpi_wakeup_code diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 7038b95d363..4a234677e21 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -199,7 +199,7 @@ void *text_poke_early(void *addr, const void *opcode, size_t len); /* Replace instructions with better alternatives for this CPU type. This runs before SMP is initialized to avoid SMP problems with - self modifying code. This implies that assymetric systems where + self modifying code. This implies that asymmetric systems where APs have less capabilities than the boot processor are not handled. Tough. Make sure you disable such features by hand. */ @@ -620,7 +620,12 @@ static int __kprobes stop_machine_text_poke(void *data) flush_icache_range((unsigned long)p->addr, (unsigned long)p->addr + p->len); } - + /* + * Intel Archiecture Software Developer's Manual section 7.1.3 specifies + * that a core serializing instruction such as "cpuid" should be + * executed on _each_ core before the new instruction is made visible. + */ + sync_core(); return 0; } diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c index ed3c2e5b714..6801959a8b2 100644 --- a/arch/x86/kernel/amd_nb.c +++ b/arch/x86/kernel/amd_nb.c @@ -15,7 +15,7 @@ static u32 *flush_words; const struct pci_device_id amd_nb_misc_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) }, - { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_MISC) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) }, {} }; EXPORT_SYMBOL(amd_nb_misc_ids); @@ -48,7 +48,7 @@ static struct pci_dev *next_northbridge(struct pci_dev *dev, int amd_cache_northbridges(void) { - int i = 0; + u16 i = 0; struct amd_northbridge *nb; struct pci_dev *misc, *link; @@ -103,9 +103,11 @@ int amd_cache_northbridges(void) } EXPORT_SYMBOL_GPL(amd_cache_northbridges); -/* Ignores subdevice/subvendor but as far as I can figure out - they're useless anyways */ -int __init early_is_amd_nb(u32 device) +/* + * Ignores subdevice/subvendor but as far as I can figure out + * they're useless anyways + */ +bool __init early_is_amd_nb(u32 device) { const struct pci_device_id *id; u32 vendor = device & 0xffff; @@ -113,8 +115,8 @@ int __init early_is_amd_nb(u32 device) device >>= 16; for (id = amd_nb_misc_ids; id->vendor; id++) if (vendor == id->vendor && device == id->device) - return 1; - return 0; + return true; + return false; } int amd_get_subcaches(int cpu) @@ -176,9 +178,9 @@ int amd_set_subcaches(int cpu, int mask) return 0; } -int amd_cache_gart(void) +static int amd_cache_gart(void) { - int i; + u16 i; if (!amd_nb_has_feature(AMD_NB_GART)) return 0; diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 7b1e8e10b89..86d1ad4962a 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -73,7 +73,7 @@ static u32 __init allocate_aperture(void) /* * using 512M as goal, in case kexec will load kernel_big * that will do the on position decompress, and could overlap with - * that positon with gart that is used. + * that position with gart that is used. * sequende: * kernel_small * ==> kexec (with kdump trigger path or previous doesn't shutdown gart) diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 4b5ebd26f56..180ca240e03 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1886,7 +1886,7 @@ void disable_IO_APIC(void) * * With interrupt-remapping, for now we will use virtual wire A mode, * as virtual wire B is little complex (need to configure both - * IOAPIC RTE aswell as interrupt-remapping table entry). + * IOAPIC RTE as well as interrupt-remapping table entry). * As this gets called during crash dump, keep this simple for now. */ if (ioapic_i8259.pin != -1 && !intr_remapping_enabled) { @@ -2905,7 +2905,7 @@ void __init setup_IO_APIC(void) } /* - * Called after all the initialization is done. If we didnt find any + * Called after all the initialization is done. If we didn't find any * APIC bugs then we can allow the modify fast path */ @@ -3983,7 +3983,7 @@ int mp_find_ioapic_pin(int ioapic, u32 gsi) static __init int bad_ioapic(unsigned long address) { if (nr_ioapics >= MAX_IO_APICS) { - printk(KERN_WARNING "WARING: Max # of I/O APICs (%d) exceeded " + printk(KERN_WARNING "WARNING: Max # of I/O APICs (%d) exceeded " "(found %d), skipping\n", MAX_IO_APICS, nr_ioapics); return 1; } diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index 0e4f24c2a74..0b4be431c62 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -66,7 +66,7 @@ * 1.5: Fix segment register reloading (in case of bad segments saved * across BIOS call). * Stephen Rothwell - * 1.6: Cope with complier/assembler differences. + * 1.6: Cope with compiler/assembler differences. * Only try to turn off the first display device. * Fix OOPS at power off with no APM BIOS by Jan Echternach * <echter@informatik.uni-rostock.de> @@ -227,6 +227,7 @@ #include <linux/suspend.h> #include <linux/kthread.h> #include <linux/jiffies.h> +#include <linux/acpi.h> #include <asm/system.h> #include <asm/uaccess.h> @@ -975,20 +976,10 @@ recalc: static void apm_power_off(void) { - unsigned char po_bios_call[] = { - 0xb8, 0x00, 0x10, /* movw $0x1000,ax */ - 0x8e, 0xd0, /* movw ax,ss */ - 0xbc, 0x00, 0xf0, /* movw $0xf000,sp */ - 0xb8, 0x07, 0x53, /* movw $0x5307,ax */ - 0xbb, 0x01, 0x00, /* movw $0x0001,bx */ - 0xb9, 0x03, 0x00, /* movw $0x0003,cx */ - 0xcd, 0x15 /* int $0x15 */ - }; - /* Some bioses don't like being called from CPU != 0 */ if (apm_info.realmode_power_off) { set_cpus_allowed_ptr(current, cpumask_of(0)); - machine_real_restart(po_bios_call, sizeof(po_bios_call)); + machine_real_restart(MRR_APM); } else { (void)set_system_power_state(APM_STATE_OFF); } @@ -2331,12 +2322,11 @@ static int __init apm_init(void) apm_info.disabled = 1; return -ENODEV; } - if (pm_flags & PM_ACPI) { + if (!acpi_disabled) { printk(KERN_NOTICE "apm: overridden by ACPI.\n"); apm_info.disabled = 1; return -ENODEV; } - pm_flags |= PM_APM; /* * Set up the long jump entry point to the APM BIOS, which is called @@ -2428,7 +2418,6 @@ static void __exit apm_exit(void) kthread_stop(kapmd_task); kapmd_task = NULL; } - pm_flags &= ~PM_APM; } module_init(apm_init); diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index f771ab6b49e..3ecece0217e 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -611,6 +611,10 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) } } #endif + + /* As a rule processors have APIC timer running in deep C states */ + if (c->x86 >= 0xf && !cpu_has_amd_erratum(amd_erratum_400)) + set_cpu_cap(c, X86_FEATURE_ARAT); } #ifdef CONFIG_X86_32 diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c index 03162dac627..cf48cdd6907 100644 --- a/arch/x86/kernel/cpu/cpufreq/longhaul.c +++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c @@ -444,7 +444,7 @@ static int __cpuinit longhaul_get_ranges(void) return -EINVAL; } /* Get max multiplier - as we always did. - * Longhaul MSR is usefull only when voltage scaling is enabled. + * Longhaul MSR is useful only when voltage scaling is enabled. * C3 is booting at max anyway. */ maxmult = mult; /* Get min multiplier */ @@ -1011,7 +1011,7 @@ static void __exit longhaul_exit(void) * trigger frequency transition in some cases. */ module_param(disable_acpi_c3, int, 0644); MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support"); -/* Change CPU voltage with frequency. Very usefull to save +/* Change CPU voltage with frequency. Very useful to save * power, but most VIA C3 processors aren't supporting it. */ module_param(scale_voltage, int, 0644); MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor"); diff --git a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c index 4a5a42b842a..755a31e0f5b 100644 --- a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c @@ -315,8 +315,6 @@ static int __init pcc_cpufreq_do_osc(acpi_handle *handle) input.count = 4; input.pointer = in_params; - input.count = 4; - input.pointer = in_params; in_params[0].type = ACPI_TYPE_BUFFER; in_params[0].buffer.length = 16; in_params[0].buffer.pointer = OSC_UUID; diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index c567dec854f..2368e38327b 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -630,8 +630,7 @@ static void print_basics(struct powernow_k8_data *data) data->powernow_table[j].frequency/1000); } else { printk(KERN_INFO PFX - " %d : fid 0x%x (%d MHz), vid 0x%x\n", - j, + "fid 0x%x (%d MHz), vid 0x%x\n", data->powernow_table[j].index & 0xff, data->powernow_table[j].frequency/1000, data->powernow_table[j].index >> 8); @@ -1276,7 +1275,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) if (powernow_k8_cpu_init_acpi(data)) { /* - * Use the PSB BIOS structure. This is only availabe on + * Use the PSB BIOS structure. This is only available on * an UP version, and is deprecated by AMD. */ if (num_online_cpus() != 1) { diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c index 8abd869baab..91bc25b67bc 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c @@ -292,7 +292,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) result = speedstep_smi_ownership(); if (result) { - dprintk("fails in aquiring ownership of a SMI interface.\n"); + dprintk("fails in acquiring ownership of a SMI interface.\n"); return -EINVAL; } @@ -360,7 +360,7 @@ static int speedstep_resume(struct cpufreq_policy *policy) int result = speedstep_smi_ownership(); if (result) - dprintk("fails in re-aquiring ownership of a SMI interface.\n"); + dprintk("fails in re-acquiring ownership of a SMI interface.\n"); return result; } diff --git a/arch/x86/kernel/cpu/mcheck/mce-apei.c b/arch/x86/kernel/cpu/mcheck/mce-apei.c index 8209472b27a..83930deec3c 100644 --- a/arch/x86/kernel/cpu/mcheck/mce-apei.c +++ b/arch/x86/kernel/cpu/mcheck/mce-apei.c @@ -106,24 +106,34 @@ int apei_write_mce(struct mce *m) ssize_t apei_read_mce(struct mce *m, u64 *record_id) { struct cper_mce_record rcd; - ssize_t len; - - len = erst_read_next(&rcd.hdr, sizeof(rcd)); - if (len <= 0) - return len; - /* Can not skip other records in storage via ERST unless clear them */ - else if (len != sizeof(rcd) || - uuid_le_cmp(rcd.hdr.creator_id, CPER_CREATOR_MCE)) { - if (printk_ratelimit()) - pr_warning( - "MCE-APEI: Can not skip the unknown record in ERST"); - return -EIO; - } - + int rc, pos; + + rc = erst_get_record_id_begin(&pos); + if (rc) + return rc; +retry: + rc = erst_get_record_id_next(&pos, record_id); + if (rc) + goto out; + /* no more record */ + if (*record_id == APEI_ERST_INVALID_RECORD_ID) + goto out; + rc = erst_read(*record_id, &rcd.hdr, sizeof(rcd)); + /* someone else has cleared the record, try next one */ + if (rc == -ENOENT) + goto retry; + else if (rc < 0) + goto out; + /* try to skip other type records in storage */ + else if (rc != sizeof(rcd) || + uuid_le_cmp(rcd.hdr.creator_id, CPER_CREATOR_MCE)) + goto retry; memcpy(m, &rcd.mce, sizeof(*m)); - *record_id = rcd.hdr.record_id; + rc = sizeof(*m); +out: + erst_get_record_id_end(); - return sizeof(*m); + return rc; } /* Check whether there is record in ERST */ diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c index a7797197956..0ed633c5048 100644 --- a/arch/x86/kernel/cpu/mcheck/mce-inject.c +++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c @@ -32,7 +32,7 @@ static void inject_mce(struct mce *m) { struct mce *i = &per_cpu(injectm, m->extcpu); - /* Make sure noone reads partially written injectm */ + /* Make sure no one reads partially written injectm */ i->finished = 0; mb(); m->finished = 0; diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index d916183b7f9..ab1122998db 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -881,7 +881,7 @@ reset: * Check if the address reported by the CPU is in a format we can parse. * It would be possible to add code for most other cases, but all would * be somewhat complicated (e.g. segment offset would require an instruction - * parser). So only support physical addresses upto page granuality for now. + * parser). So only support physical addresses up to page granuality for now. */ static int mce_usable_address(struct mce *m) { diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index 9f27228ceff..a71efcdbb09 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -1,6 +1,6 @@ /* * This only handles 32bit MTRR on 32bit hosts. This is strictly wrong - * because MTRRs can span upto 40 bits (36bits on most modern x86) + * because MTRRs can span up to 40 bits (36bits on most modern x86) */ #define DEBUG diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index eb00677ee2a..eed3673a865 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -1114,7 +1114,7 @@ static int x86_pmu_add(struct perf_event *event, int flags) /* * If group events scheduling transaction was started, - * skip the schedulability test here, it will be peformed + * skip the schedulability test here, it will be performed * at commit time (->commit_txn) as a whole */ if (cpuc->group_flag & PERF_EVENT_TXN) @@ -1795,7 +1795,7 @@ perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs) perf_callchain_store(entry, regs->ip); - dump_trace(NULL, regs, NULL, &backtrace_ops, entry); + dump_trace(NULL, regs, NULL, 0, &backtrace_ops, entry); } #ifdef CONFIG_COMPAT diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c index d3d7b59841e..c2520e178d3 100644 --- a/arch/x86/kernel/cpu/perf_event_p4.c +++ b/arch/x86/kernel/cpu/perf_event_p4.c @@ -1,5 +1,5 @@ /* - * Netburst Perfomance Events (P4, old Xeon) + * Netburst Performance Events (P4, old Xeon) * * Copyright (C) 2010 Parallels, Inc., Cyrill Gorcunov <gorcunov@openvz.org> * Copyright (C) 2010 Intel Corporation, Lin Ming <ming.m.lin@intel.com> @@ -679,7 +679,7 @@ static int p4_validate_raw_event(struct perf_event *event) */ /* - * if an event is shared accross the logical threads + * if an event is shared across the logical threads * the user needs special permissions to be able to use it */ if (p4_ht_active() && p4_event_bind_map[v].shared) { @@ -791,13 +791,13 @@ static void p4_pmu_disable_pebs(void) * * It's still allowed that two threads setup same cache * events so we can't simply clear metrics until we knew - * noone is depending on us, so we need kind of counter + * no one is depending on us, so we need kind of counter * for "ReplayEvent" users. * * What is more complex -- RAW events, if user (for some * reason) will pass some cache event metric with improper * event opcode -- it's fine from hardware point of view - * but completely nonsence from "meaning" of such action. + * but completely nonsense from "meaning" of such action. * * So at moment let leave metrics turned on forever -- it's * ok for now but need to be revisited! diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c index 227b0448960..d22d0c4edcf 100644 --- a/arch/x86/kernel/cpu/vmware.c +++ b/arch/x86/kernel/cpu/vmware.c @@ -86,7 +86,7 @@ static void __init vmware_platform_setup(void) } /* - * While checking the dmi string infomation, just checking the product + * While checking the dmi string information, just checking the product * serial key should be enough, as this will always have a VMware * specific string when running under VMware hypervisor. */ diff --git a/arch/x86/kernel/crash_dump_32.c b/arch/x86/kernel/crash_dump_32.c index d5cd13945d5..642f75a68cd 100644 --- a/arch/x86/kernel/crash_dump_32.c +++ b/arch/x86/kernel/crash_dump_32.c @@ -14,9 +14,6 @@ static void *kdump_buf_page; -/* Stores the physical address of elf header of crash image. */ -unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX; - static inline bool is_crashed_pfn_valid(unsigned long pfn) { #ifndef CONFIG_X86_PAE diff --git a/arch/x86/kernel/crash_dump_64.c b/arch/x86/kernel/crash_dump_64.c index 994828899e0..afa64adb75e 100644 --- a/arch/x86/kernel/crash_dump_64.c +++ b/arch/x86/kernel/crash_dump_64.c @@ -10,9 +10,6 @@ #include <linux/uaccess.h> #include <linux/io.h> -/* Stores the physical address of elf header of crash image. */ -unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX; - /** * copy_oldmem_page - copy one page from "oldmem" * @pfn: page frame number to be copied diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index 7a8cebc9ff2..706a9fb46a5 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -65,12 +65,10 @@ unsigned int irq_create_of_mapping(struct device_node *controller, return 0; ret = ih->xlate(ih, intspec, intsize, &virq, &type); if (ret) - return ret; + return 0; if (type == IRQ_TYPE_NONE) return virq; - /* set the mask if it is different from current */ - if (type == (irq_to_desc(virq)->status & IRQF_TRIGGER_MASK)) - set_irq_type(virq, type); + irq_set_irq_type(virq, type); return virq; } EXPORT_SYMBOL_GPL(irq_create_of_mapping); diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c index 220a1c11cfd..e2a3f0606da 100644 --- a/arch/x86/kernel/dumpstack.c +++ b/arch/x86/kernel/dumpstack.c @@ -27,7 +27,7 @@ static int die_counter; void printk_address(unsigned long address, int reliable) { - printk(" [<%p>] %s%pS\n", (void *) address, + printk(" [<%p>] %s%pB\n", (void *) address, reliable ? "" : "? ", (void *) address); } @@ -175,21 +175,21 @@ static const struct stacktrace_ops print_trace_ops = { void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, - unsigned long *stack, char *log_lvl) + unsigned long *stack, unsigned long bp, char *log_lvl) { printk("%sCall Trace:\n", log_lvl); - dump_trace(task, regs, stack, &print_trace_ops, log_lvl); + dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl); } void show_trace(struct task_struct *task, struct pt_regs *regs, - unsigned long *stack) + unsigned long *stack, unsigned long bp) { - show_trace_log_lvl(task, regs, stack, ""); + show_trace_log_lvl(task, regs, stack, bp, ""); } void show_stack(struct task_struct *task, unsigned long *sp) { - show_stack_log_lvl(task, NULL, sp, ""); + show_stack_log_lvl(task, NULL, sp, 0, ""); } /* @@ -197,14 +197,16 @@ void show_stack(struct task_struct *task, unsigned long *sp) */ void dump_stack(void) { + unsigned long bp; unsigned long stack; + bp = stack_frame(current, NULL); printk("Pid: %d, comm: %.20s %s %s %.*s\n", current->pid, current->comm, print_tainted(), init_utsname()->release, (int)strcspn(init_utsname()->version, " "), init_utsname()->version); - show_trace(NULL, NULL, &stack); + show_trace(NULL, NULL, &stack, bp); } EXPORT_SYMBOL(dump_stack); @@ -320,16 +322,6 @@ void die(const char *str, struct pt_regs *regs, long err) oops_end(flags, regs, sig); } -static int __init oops_setup(char *s) -{ - if (!s) - return -EINVAL; - if (!strcmp(s, "panic")) - panic_on_oops = 1; - return 0; -} -early_param("oops", oops_setup); - static int __init kstack_setup(char *s) { if (!s) diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c index 74cc1eda384..3b97a80ce32 100644 --- a/arch/x86/kernel/dumpstack_32.c +++ b/arch/x86/kernel/dumpstack_32.c @@ -17,12 +17,11 @@ #include <asm/stacktrace.h> -void dump_trace(struct task_struct *task, - struct pt_regs *regs, unsigned long *stack, +void dump_trace(struct task_struct *task, struct pt_regs *regs, + unsigned long *stack, unsigned long bp, const struct stacktrace_ops *ops, void *data) { int graph = 0; - unsigned long bp; if (!task) task = current; @@ -35,7 +34,9 @@ void dump_trace(struct task_struct *task, stack = (unsigned long *)task->thread.sp; } - bp = stack_frame(task, regs); + if (!bp) + bp = stack_frame(task, regs); + for (;;) { struct thread_info *context; @@ -55,7 +56,7 @@ EXPORT_SYMBOL(dump_trace); void show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs, - unsigned long *sp, char *log_lvl) + unsigned long *sp, unsigned long bp, char *log_lvl) { unsigned long *stack; int i; @@ -77,7 +78,7 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs, touch_nmi_watchdog(); } printk(KERN_CONT "\n"); - show_trace_log_lvl(task, regs, sp, log_lvl); + show_trace_log_lvl(task, regs, sp, bp, log_lvl); } @@ -102,7 +103,7 @@ void show_registers(struct pt_regs *regs) u8 *ip; printk(KERN_EMERG "Stack:\n"); - show_stack_log_lvl(NULL, regs, ®s->sp, KERN_EMERG); + show_stack_log_lvl(NULL, regs, ®s->sp, 0, KERN_EMERG); printk(KERN_EMERG "Code: "); diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c index a6b6fcf7f0a..e71c98d3c0d 100644 --- a/arch/x86/kernel/dumpstack_64.c +++ b/arch/x86/kernel/dumpstack_64.c @@ -139,8 +139,8 @@ fixup_bp_irq_link(unsigned long bp, unsigned long *stack, * severe exception (double fault, nmi, stack fault, debug, mce) hardware stack */ -void dump_trace(struct task_struct *task, - struct pt_regs *regs, unsigned long *stack, +void dump_trace(struct task_struct *task, struct pt_regs *regs, + unsigned long *stack, unsigned long bp, const struct stacktrace_ops *ops, void *data) { const unsigned cpu = get_cpu(); @@ -150,7 +150,6 @@ void dump_trace(struct task_struct *task, struct thread_info *tinfo; int graph = 0; unsigned long dummy; - unsigned long bp; if (!task) task = current; @@ -161,7 +160,8 @@ void dump_trace(struct task_struct *task, stack = (unsigned long *)task->thread.sp; } - bp = stack_frame(task, regs); + if (!bp) + bp = stack_frame(task, regs); /* * Print function call entries in all stacks, starting at the * current stack address. If the stacks consist of nested @@ -225,7 +225,7 @@ EXPORT_SYMBOL(dump_trace); void show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs, - unsigned long *sp, char *log_lvl) + unsigned long *sp, unsigned long bp, char *log_lvl) { unsigned long *irq_stack_end; unsigned long *irq_stack; @@ -269,7 +269,7 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs, preempt_enable(); printk(KERN_CONT "\n"); - show_trace_log_lvl(task, regs, sp, log_lvl); + show_trace_log_lvl(task, regs, sp, bp, log_lvl); } void show_registers(struct pt_regs *regs) @@ -298,7 +298,7 @@ void show_registers(struct pt_regs *regs) printk(KERN_EMERG "Stack:\n"); show_stack_log_lvl(NULL, regs, (unsigned long *)sp, - KERN_EMERG); + 0, KERN_EMERG); printk(KERN_EMERG "Code: "); diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index cdf5bfd9d4d..3e2ef842531 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/types.h> #include <linux/init.h> +#include <linux/crash_dump.h> #include <linux/bootmem.h> #include <linux/pfn.h> #include <linux/suspend.h> diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index 9efbdcc5642..3755ef49439 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -159,7 +159,12 @@ static void __init ati_bugs_contd(int num, int slot, int func) if (rev >= 0x40) acpi_fix_pin2_polarity = 1; - if (rev > 0x13) + /* + * SB600: revisions 0x11, 0x12, 0x13, 0x14, ... + * SB700: revisions 0x39, 0x3a, ... + * SB800: revisions 0x40, 0x41, ... + */ + if (rev >= 0x39) return; if (acpi_use_timer_override) diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index fa41f7298c8..5c1a9197491 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -1414,7 +1414,7 @@ ENTRY(async_page_fault) pushl_cfi $do_async_page_fault jmp error_code CFI_ENDPROC -END(apf_page_fault) +END(async_page_fault) #endif /* diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index b72b4a6466a..8a445a0c989 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -18,7 +18,7 @@ * A note on terminology: * - top of stack: Architecture defined interrupt frame from SS to RIP * at the top of the kernel process stack. - * - partial stack frame: partially saved registers upto R11. + * - partial stack frame: partially saved registers up to R11. * - full stack frame: Like partial stack frame, but all register saved. * * Some macro usage: @@ -422,7 +422,7 @@ ENTRY(ret_from_fork) END(ret_from_fork) /* - * System call entry. Upto 6 arguments in registers are supported. + * System call entry. Up to 6 arguments in registers are supported. * * SYSCALL does not save anything on the stack and does not change the * stack pointer. diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index 7f138b3c3c5..d6d6bb36193 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -34,15 +34,6 @@ void __init i386_start_kernel(void) { memblock_init(); -#ifdef CONFIG_X86_TRAMPOLINE - /* - * But first pinch a few for the stack/trampoline stuff - * FIXME: Don't need the extra page at 4K, but need to fix - * trampoline before removing it. (see the GDT stuff) - */ - memblock_x86_reserve_range(PAGE_SIZE, PAGE_SIZE + PAGE_SIZE, "EX TRAMPOLINE"); -#endif - memblock_x86_reserve_range(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS"); #ifdef CONFIG_BLK_DEV_INITRD diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index 2d2673c28af..5655c2272ad 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -77,9 +77,6 @@ void __init x86_64_start_kernel(char * real_mode_data) /* Make NULL pointers segfault */ zap_identity_mappings(); - /* Cleanup the over mapped high alias */ - cleanup_highmap(); - max_pfn_mapped = KERNEL_IMAGE_SIZE >> PAGE_SHIFT; for (i = 0; i < NUM_EXCEPTION_VECTORS; i++) { diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 239046bd447..e11e39478a4 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -136,10 +136,9 @@ ident_complete: /* Fixup phys_base */ addq %rbp, phys_base(%rip) -#ifdef CONFIG_X86_TRAMPOLINE + /* Fixup trampoline */ addq %rbp, trampoline_level4_pgt + 0(%rip) addq %rbp, trampoline_level4_pgt + (511*8)(%rip) -#endif /* Due to ENTRY(), sometimes the empty space gets filled with * zeros. Better take a jmp than relying on empty space being diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index e60c38cc0ee..12aff253768 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -145,7 +145,7 @@ EXPORT_SYMBOL_GPL(fpu_finit); * The _current_ task is using the FPU for the first time * so initialize it and set the mxcsr to its default * value at reset if we support XMM instructions and then - * remeber the current task has used the FPU. + * remember the current task has used the FPU. */ int init_fpu(struct task_struct *tsk) { diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index 9974d21048f..72090705a65 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -172,7 +172,7 @@ asmlinkage void do_softirq(void) call_on_stack(__do_softirq, isp); /* - * Shouldnt happen, we returned above if in_interrupt(): + * Shouldn't happen, we returned above if in_interrupt(): */ WARN_ON_ONCE(softirq_count()); } diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index 7c64c420a9f..dba0b36941a 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -278,7 +278,7 @@ static int hw_break_release_slot(int breakno) pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu); if (dbg_release_bp_slot(*pevent)) /* - * The debugger is responisble for handing the retry on + * The debugger is responsible for handing the retry on * remove failure. */ return -1; diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c index 8dc44662394..33c07b0b122 100644 --- a/arch/x86/kernel/kvm.c +++ b/arch/x86/kernel/kvm.c @@ -493,7 +493,7 @@ static void __init kvm_smp_prepare_boot_cpu(void) native_smp_prepare_boot_cpu(); } -static void kvm_guest_cpu_online(void *dummy) +static void __cpuinit kvm_guest_cpu_online(void *dummy) { kvm_guest_cpu_init(); } diff --git a/arch/x86/kernel/mca_32.c b/arch/x86/kernel/mca_32.c index 63eaf659623..177183cbb6a 100644 --- a/arch/x86/kernel/mca_32.c +++ b/arch/x86/kernel/mca_32.c @@ -259,7 +259,7 @@ static int __init mca_init(void) /* * WARNING: Be careful when making changes here. Putting an adapter * and the motherboard simultaneously into setup mode may result in - * damage to chips (according to The Indispensible PC Hardware Book + * damage to chips (according to The Indispensable PC Hardware Book * by Hans-Peter Messmer). Also, we disable system interrupts (so * that we are not disturbed in the middle of this). */ diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 01b0f6d0645..5a532ce646b 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -714,10 +714,6 @@ static void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) *nr_m_spare += 1; } } -#else /* CONFIG_X86_IO_APIC */ -static -inline void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {} -#endif /* CONFIG_X86_IO_APIC */ static int check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count) @@ -731,6 +727,10 @@ check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count) return ret; } +#else /* CONFIG_X86_IO_APIC */ +static +inline void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {} +#endif /* CONFIG_X86_IO_APIC */ static int __init replace_intsrc_all(struct mpc_table *mpc, unsigned long mpc_new_phys, @@ -883,7 +883,7 @@ static int __init update_mp_table(void) if (!mpc_new_phys) { unsigned char old, new; - /* check if we can change the postion */ + /* check if we can change the position */ mpc->checksum = 0; old = mpf_checksum((unsigned char *)mpc, mpc->length); mpc->checksum = 0xff; @@ -892,7 +892,7 @@ static int __init update_mp_table(void) printk(KERN_INFO "mpc is readonly, please try alloc_mptable instead\n"); return 0; } - printk(KERN_INFO "use in-positon replacing\n"); + printk(KERN_INFO "use in-position replacing\n"); } else { mpf->physptr = mpc_new_phys; mpc_new = phys_to_virt(mpc_new_phys); diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c index f56a117cef6..e8c33a30200 100644 --- a/arch/x86/kernel/pci-calgary_64.c +++ b/arch/x86/kernel/pci-calgary_64.c @@ -1279,7 +1279,7 @@ static int __init calgary_bus_has_devices(int bus, unsigned short pci_dev) if (pci_dev == PCI_DEVICE_ID_IBM_CALIOC2) { /* - * FIXME: properly scan for devices accross the + * FIXME: properly scan for devices across the * PCI-to-PCI bridge on every CalIOC2 port. */ return 1; @@ -1295,7 +1295,7 @@ static int __init calgary_bus_has_devices(int bus, unsigned short pci_dev) /* * calgary_init_bitmap_from_tce_table(): - * Funtion for kdump case. In the second/kdump kernel initialize + * Function for kdump case. In the second/kdump kernel initialize * the bitmap based on the tce table entries obtained from first kernel */ static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 99fa3adf014..d46cbe46b7a 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -87,7 +87,7 @@ void exit_thread(void) void show_regs(struct pt_regs *regs) { show_registers(regs); - show_trace(NULL, regs, (unsigned long *)kernel_stack_pointer(regs)); + show_trace(NULL, regs, (unsigned long *)kernel_stack_pointer(regs), 0); } void show_regs_common(void) diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index bd387e8f73b..6c9dd922ac0 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -501,6 +501,10 @@ void set_personality_64bit(void) /* Make sure to be in 64bit mode */ clear_thread_flag(TIF_IA32); + /* Ensure the corresponding mm is not marked. */ + if (current->mm) + current->mm->context.ia32_compat = 0; + /* TBD: overwrites user setup. Should have two bits. But 64bit processes have always behaved this way, so it's not too bad. The main problem is just that @@ -516,6 +520,10 @@ void set_personality_ia32(void) set_thread_flag(TIF_IA32); current->personality |= force_personality32; + /* Mark the associated mm as containing 32-bit tasks. */ + if (current->mm) + current->mm->context.ia32_compat = 1; + /* Prepare the first "return" to user space */ current_thread_info()->status |= TS_COMPAT; } diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 715037caeb4..d3ce37edb54 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -303,68 +303,16 @@ static int __init reboot_init(void) } core_initcall(reboot_init); -/* The following code and data reboots the machine by switching to real - mode and jumping to the BIOS reset entry point, as if the CPU has - really been reset. The previous version asked the keyboard - controller to pulse the CPU reset line, which is more thorough, but - doesn't work with at least one type of 486 motherboard. It is easy - to stop this code working; hence the copious comments. */ -static const unsigned long long -real_mode_gdt_entries [3] = -{ - 0x0000000000000000ULL, /* Null descriptor */ - 0x00009b000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */ - 0x000093000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */ -}; +extern const unsigned char machine_real_restart_asm[]; +extern const u64 machine_real_restart_gdt[3]; -static const struct desc_ptr -real_mode_gdt = { sizeof (real_mode_gdt_entries) - 1, (long)real_mode_gdt_entries }, -real_mode_idt = { 0x3ff, 0 }; - -/* This is 16-bit protected mode code to disable paging and the cache, - switch to real mode and jump to the BIOS reset code. - - The instruction that switches to real mode by writing to CR0 must be - followed immediately by a far jump instruction, which set CS to a - valid value for real mode, and flushes the prefetch queue to avoid - running instructions that have already been decoded in protected - mode. - - Clears all the flags except ET, especially PG (paging), PE - (protected-mode enable) and TS (task switch for coprocessor state - save). Flushes the TLB after paging has been disabled. Sets CD and - NW, to disable the cache on a 486, and invalidates the cache. This - is more like the state of a 486 after reset. I don't know if - something else should be done for other chips. - - More could be done here to set up the registers as if a CPU reset had - occurred; hopefully real BIOSs don't assume much. */ -static const unsigned char real_mode_switch [] = -{ - 0x66, 0x0f, 0x20, 0xc0, /* movl %cr0,%eax */ - 0x66, 0x83, 0xe0, 0x11, /* andl $0x00000011,%eax */ - 0x66, 0x0d, 0x00, 0x00, 0x00, 0x60, /* orl $0x60000000,%eax */ - 0x66, 0x0f, 0x22, 0xc0, /* movl %eax,%cr0 */ - 0x66, 0x0f, 0x22, 0xd8, /* movl %eax,%cr3 */ - 0x66, 0x0f, 0x20, 0xc3, /* movl %cr0,%ebx */ - 0x66, 0x81, 0xe3, 0x00, 0x00, 0x00, 0x60, /* andl $0x60000000,%ebx */ - 0x74, 0x02, /* jz f */ - 0x0f, 0x09, /* wbinvd */ - 0x24, 0x10, /* f: andb $0x10,al */ - 0x66, 0x0f, 0x22, 0xc0 /* movl %eax,%cr0 */ -}; -static const unsigned char jump_to_bios [] = +void machine_real_restart(unsigned int type) { - 0xea, 0x00, 0x00, 0xff, 0xff /* ljmp $0xffff,$0x0000 */ -}; + void *restart_va; + unsigned long restart_pa; + void (*restart_lowmem)(unsigned int); + u64 *lowmem_gdt; -/* - * Switch to real mode and then execute the code - * specified by the code and length parameters. - * We assume that length will aways be less that 100! - */ -void machine_real_restart(const unsigned char *code, int length) -{ local_irq_disable(); /* Write zero to CMOS register number 0x0f, which the BIOS POST @@ -392,41 +340,23 @@ void machine_real_restart(const unsigned char *code, int length) too. */ *((unsigned short *)0x472) = reboot_mode; - /* For the switch to real mode, copy some code to low memory. It has - to be in the first 64k because it is running in 16-bit mode, and it - has to have the same physical and virtual address, because it turns - off paging. Copy it near the end of the first page, out of the way - of BIOS variables. */ - memcpy((void *)(0x1000 - sizeof(real_mode_switch) - 100), - real_mode_switch, sizeof (real_mode_switch)); - memcpy((void *)(0x1000 - 100), code, length); - - /* Set up the IDT for real mode. */ - load_idt(&real_mode_idt); - - /* Set up a GDT from which we can load segment descriptors for real - mode. The GDT is not used in real mode; it is just needed here to - prepare the descriptors. */ - load_gdt(&real_mode_gdt); - - /* Load the data segment registers, and thus the descriptors ready for - real mode. The base address of each segment is 0x100, 16 times the - selector value being loaded here. This is so that the segment - registers don't have to be reloaded after switching to real mode: - the values are consistent for real mode operation already. */ - __asm__ __volatile__ ("movl $0x0010,%%eax\n" - "\tmovl %%eax,%%ds\n" - "\tmovl %%eax,%%es\n" - "\tmovl %%eax,%%fs\n" - "\tmovl %%eax,%%gs\n" - "\tmovl %%eax,%%ss" : : : "eax"); - - /* Jump to the 16-bit code that we copied earlier. It disables paging - and the cache, switches to real mode, and jumps to the BIOS reset - entry point. */ - __asm__ __volatile__ ("ljmp $0x0008,%0" - : - : "i" ((void *)(0x1000 - sizeof (real_mode_switch) - 100))); + /* Patch the GDT in the low memory trampoline */ + lowmem_gdt = TRAMPOLINE_SYM(machine_real_restart_gdt); + + restart_va = TRAMPOLINE_SYM(machine_real_restart_asm); + restart_pa = virt_to_phys(restart_va); + restart_lowmem = (void (*)(unsigned int))restart_pa; + + /* GDT[0]: GDT self-pointer */ + lowmem_gdt[0] = + (u64)(sizeof(machine_real_restart_gdt) - 1) + + ((u64)virt_to_phys(lowmem_gdt) << 16); + /* GDT[1]: 64K real mode code segment */ + lowmem_gdt[1] = + GDT_ENTRY(0x009b, restart_pa, 0xffff); + + /* Jump to the identity-mapped low memory code */ + restart_lowmem(type); } #ifdef CONFIG_APM_MODULE EXPORT_SYMBOL(machine_real_restart); @@ -581,7 +511,7 @@ static void native_machine_emergency_restart(void) #ifdef CONFIG_X86_32 case BOOT_BIOS: - machine_real_restart(jump_to_bios, sizeof(jump_to_bios)); + machine_real_restart(MRR_BIOS); reboot_type = BOOT_KBD; break; diff --git a/arch/x86/kernel/reboot_32.S b/arch/x86/kernel/reboot_32.S new file mode 100644 index 00000000000..29092b38d81 --- /dev/null +++ b/arch/x86/kernel/reboot_32.S @@ -0,0 +1,135 @@ +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/segment.h> +#include <asm/page_types.h> + +/* + * The following code and data reboots the machine by switching to real + * mode and jumping to the BIOS reset entry point, as if the CPU has + * really been reset. The previous version asked the keyboard + * controller to pulse the CPU reset line, which is more thorough, but + * doesn't work with at least one type of 486 motherboard. It is easy + * to stop this code working; hence the copious comments. + * + * This code is called with the restart type (0 = BIOS, 1 = APM) in %eax. + */ + .section ".x86_trampoline","a" + .balign 16 + .code32 +ENTRY(machine_real_restart_asm) +r_base = . + /* Get our own relocated address */ + call 1f +1: popl %ebx + subl $1b, %ebx + + /* Compute the equivalent real-mode segment */ + movl %ebx, %ecx + shrl $4, %ecx + + /* Patch post-real-mode segment jump */ + movw dispatch_table(%ebx,%eax,2),%ax + movw %ax, 101f(%ebx) + movw %cx, 102f(%ebx) + + /* Set up the IDT for real mode. */ + lidtl machine_real_restart_idt(%ebx) + + /* + * Set up a GDT from which we can load segment descriptors for real + * mode. The GDT is not used in real mode; it is just needed here to + * prepare the descriptors. + */ + lgdtl machine_real_restart_gdt(%ebx) + + /* + * Load the data segment registers with 16-bit compatible values + */ + movl $16, %ecx + movl %ecx, %ds + movl %ecx, %es + movl %ecx, %fs + movl %ecx, %gs + movl %ecx, %ss + ljmpl $8, $1f - r_base + +/* + * This is 16-bit protected mode code to disable paging and the cache, + * switch to real mode and jump to the BIOS reset code. + * + * The instruction that switches to real mode by writing to CR0 must be + * followed immediately by a far jump instruction, which set CS to a + * valid value for real mode, and flushes the prefetch queue to avoid + * running instructions that have already been decoded in protected + * mode. + * + * Clears all the flags except ET, especially PG (paging), PE + * (protected-mode enable) and TS (task switch for coprocessor state + * save). Flushes the TLB after paging has been disabled. Sets CD and + * NW, to disable the cache on a 486, and invalidates the cache. This + * is more like the state of a 486 after reset. I don't know if + * something else should be done for other chips. + * + * More could be done here to set up the registers as if a CPU reset had + * occurred; hopefully real BIOSs don't assume much. This is not the + * actual BIOS entry point, anyway (that is at 0xfffffff0). + * + * Most of this work is probably excessive, but it is what is tested. + */ + .code16 +1: + xorl %ecx, %ecx + movl %cr0, %eax + andl $0x00000011, %eax + orl $0x60000000, %eax + movl %eax, %cr0 + movl %ecx, %cr3 + movl %cr0, %edx + andl $0x60000000, %edx /* If no cache bits -> no wbinvd */ + jz 2f + wbinvd +2: + andb $0x10, %al + movl %eax, %cr0 + .byte 0xea /* ljmpw */ +101: .word 0 /* Offset */ +102: .word 0 /* Segment */ + +bios: + ljmpw $0xf000, $0xfff0 + +apm: + movw $0x1000, %ax + movw %ax, %ss + movw $0xf000, %sp + movw $0x5307, %ax + movw $0x0001, %bx + movw $0x0003, %cx + int $0x15 + +END(machine_real_restart_asm) + + .balign 16 + /* These must match <asm/reboot.h */ +dispatch_table: + .word bios - r_base + .word apm - r_base +END(dispatch_table) + + .balign 16 +machine_real_restart_idt: + .word 0xffff /* Length - real mode default value */ + .long 0 /* Base - real mode default value */ +END(machine_real_restart_idt) + + .balign 16 +ENTRY(machine_real_restart_gdt) + .quad 0 /* Self-pointer, filled in by PM code */ + .quad 0 /* 16-bit code segment, filled in by PM code */ + /* + * 16-bit data segment with the selector value 16 = 0x10 and + * base value 0x100; since this is consistent with real mode + * semantics we don't have to reload the segments once CR0.PE = 0. + */ + .quad GDT_ENTRY(0x0093, 0x100, 0xffff) +END(machine_real_restart_gdt) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index b176f2b1f45..5a0484a95ad 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -294,30 +294,11 @@ static void __init init_gbpages(void) else direct_gbpages = 0; } - -static void __init cleanup_highmap_brk_end(void) -{ - pud_t *pud; - pmd_t *pmd; - - mmu_cr4_features = read_cr4(); - - /* - * _brk_end cannot change anymore, but it and _end may be - * located on different 2M pages. cleanup_highmap(), however, - * can only consider _end when it runs, so destroy any - * mappings beyond _brk_end here. - */ - pud = pud_offset(pgd_offset_k(_brk_end), _brk_end); - pmd = pmd_offset(pud, _brk_end - 1); - while (++pmd <= pmd_offset(pud, (unsigned long)_end - 1)) - pmd_clear(pmd); -} #else static inline void init_gbpages(void) { } -static inline void cleanup_highmap_brk_end(void) +static void __init cleanup_highmap(void) { } #endif @@ -330,8 +311,6 @@ static void __init reserve_brk(void) /* Mark brk area as locked down and no longer taking any new allocations */ _brk_start = 0; - - cleanup_highmap_brk_end(); } #ifdef CONFIG_BLK_DEV_INITRD @@ -640,28 +619,6 @@ void __init reserve_standard_io_resources(void) } -/* - * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by - * is_kdump_kernel() to determine if we are booting after a panic. Hence - * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE. - */ - -#ifdef CONFIG_CRASH_DUMP -/* elfcorehdr= specifies the location of elf core header - * stored by the crashed kernel. This option will be passed - * by kexec loader to the capture kernel. - */ -static int __init setup_elfcorehdr(char *arg) -{ - char *end; - if (!arg) - return -EINVAL; - elfcorehdr_addr = memparse(arg, &end); - return end > arg ? 0 : -EINVAL; -} -early_param("elfcorehdr", setup_elfcorehdr); -#endif - static __init void reserve_ibft_region(void) { unsigned long addr, size = 0; @@ -950,6 +907,8 @@ void __init setup_arch(char **cmdline_p) */ reserve_brk(); + cleanup_highmap(); + memblock.current_limit = get_max_mapped(); memblock_x86_fill(); @@ -963,15 +922,8 @@ void __init setup_arch(char **cmdline_p) printk(KERN_DEBUG "initial memory mapped : 0 - %08lx\n", max_pfn_mapped<<PAGE_SHIFT); - reserve_trampoline_memory(); + setup_trampolines(); -#ifdef CONFIG_ACPI_SLEEP - /* - * Reserve low memory region for sleep support. - * even before init_memory_mapping - */ - acpi_reserve_wakeup_memory(); -#endif init_gbpages(); /* max_pfn_mapped is updated here */ diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index e9efdfd51c8..c2871d3c71b 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -711,7 +711,7 @@ do_rest: stack_start = c_idle.idle->thread.sp; /* start_ip had better be page-aligned! */ - start_ip = setup_trampoline(); + start_ip = trampoline_address(); /* So we see what's up */ announce_cpu(cpu, apicid); @@ -721,6 +721,8 @@ do_rest: * the targeted processor. */ + printk(KERN_DEBUG "smpboot cpu %d: start_ip = %lx\n", cpu, start_ip); + atomic_set(&init_deasserted, 0); if (get_uv_system_type() != UV_NON_UNIQUE_APIC) { @@ -774,8 +776,8 @@ do_rest: pr_debug("CPU%d: has booted.\n", cpu); else { boot_error = 1; - if (*((volatile unsigned char *)trampoline_base) - == 0xA5) + if (*(volatile u32 *)TRAMPOLINE_SYM(trampoline_status) + == 0xA5A5A5A5) /* trampoline started but...? */ pr_err("CPU%d: Stuck ??\n", cpu); else @@ -801,7 +803,7 @@ do_rest: } /* mark "stuck" area as not stuck */ - *((volatile unsigned long *)trampoline_base) = 0; + *(volatile u32 *)TRAMPOLINE_SYM(trampoline_status) = 0; if (get_uv_system_type() != UV_NON_UNIQUE_APIC) { /* diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c index 938c8e10a19..6515733a289 100644 --- a/arch/x86/kernel/stacktrace.c +++ b/arch/x86/kernel/stacktrace.c @@ -73,7 +73,7 @@ static const struct stacktrace_ops save_stack_ops_nosched = { */ void save_stack_trace(struct stack_trace *trace) { - dump_trace(current, NULL, NULL, &save_stack_ops, trace); + dump_trace(current, NULL, NULL, 0, &save_stack_ops, trace); if (trace->nr_entries < trace->max_entries) trace->entries[trace->nr_entries++] = ULONG_MAX; } @@ -81,14 +81,14 @@ EXPORT_SYMBOL_GPL(save_stack_trace); void save_stack_trace_regs(struct stack_trace *trace, struct pt_regs *regs) { - dump_trace(current, regs, NULL, &save_stack_ops, trace); + dump_trace(current, regs, NULL, 0, &save_stack_ops, trace); if (trace->nr_entries < trace->max_entries) trace->entries[trace->nr_entries++] = ULONG_MAX; } void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) { - dump_trace(tsk, NULL, NULL, &save_stack_ops_nosched, trace); + dump_trace(tsk, NULL, NULL, 0, &save_stack_ops_nosched, trace); if (trace->nr_entries < trace->max_entries) trace->entries[trace->nr_entries++] = ULONG_MAX; } diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c index 58de45ee08b..7977f0cfe33 100644 --- a/arch/x86/kernel/step.c +++ b/arch/x86/kernel/step.c @@ -166,7 +166,7 @@ static void enable_step(struct task_struct *child, bool block) * Make sure block stepping (BTF) is not enabled unless it should be. * Note that we don't try to worry about any is_setting_trap_flag() * instructions after the first when using block stepping. - * So noone should try to use debugger block stepping in a program + * So no one should try to use debugger block stepping in a program * that uses user-mode single stepping itself. */ if (enable_single_step(child) && block) { diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S index 5f181742e8f..abce34d5c79 100644 --- a/arch/x86/kernel/syscall_table_32.S +++ b/arch/x86/kernel/syscall_table_32.S @@ -343,3 +343,4 @@ ENTRY(sys_call_table) .long sys_name_to_handle_at .long sys_open_by_handle_at .long sys_clock_adjtime + .long sys_syncfs diff --git a/arch/x86/kernel/topology.c b/arch/x86/kernel/topology.c index 7e4515957a1..8927486a464 100644 --- a/arch/x86/kernel/topology.c +++ b/arch/x86/kernel/topology.c @@ -39,7 +39,7 @@ int __ref arch_register_cpu(int num) /* * CPU0 cannot be offlined due to several * restrictions and assumptions in kernel. This basically - * doesnt add a control file, one cannot attempt to offline + * doesn't add a control file, one cannot attempt to offline * BSP. * * Also certain PCI quirks require not to enable hotplug control diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c index a375616d77f..a91ae7709b4 100644 --- a/arch/x86/kernel/trampoline.c +++ b/arch/x86/kernel/trampoline.c @@ -2,39 +2,41 @@ #include <linux/memblock.h> #include <asm/trampoline.h> +#include <asm/cacheflush.h> #include <asm/pgtable.h> -#if defined(CONFIG_X86_64) && defined(CONFIG_ACPI_SLEEP) -#define __trampinit -#define __trampinitdata -#else -#define __trampinit __cpuinit -#define __trampinitdata __cpuinitdata -#endif +unsigned char *x86_trampoline_base; -/* ready for x86_64 and x86 */ -unsigned char *__trampinitdata trampoline_base; - -void __init reserve_trampoline_memory(void) +void __init setup_trampolines(void) { phys_addr_t mem; + size_t size = PAGE_ALIGN(x86_trampoline_end - x86_trampoline_start); /* Has to be in very low memory so we can execute real-mode AP code. */ - mem = memblock_find_in_range(0, 1<<20, TRAMPOLINE_SIZE, PAGE_SIZE); + mem = memblock_find_in_range(0, 1<<20, size, PAGE_SIZE); if (mem == MEMBLOCK_ERROR) panic("Cannot allocate trampoline\n"); - trampoline_base = __va(mem); - memblock_x86_reserve_range(mem, mem + TRAMPOLINE_SIZE, "TRAMPOLINE"); + x86_trampoline_base = __va(mem); + memblock_x86_reserve_range(mem, mem + size, "TRAMPOLINE"); + + printk(KERN_DEBUG "Base memory trampoline at [%p] %llx size %zu\n", + x86_trampoline_base, (unsigned long long)mem, size); + + memcpy(x86_trampoline_base, x86_trampoline_start, size); } /* - * Currently trivial. Write the real->protected mode - * bootstrap into the page concerned. The caller - * has made sure it's suitably aligned. + * setup_trampolines() gets called very early, to guarantee the + * availability of low memory. This is before the proper kernel page + * tables are set up, so we cannot set page permissions in that + * function. Thus, we use an arch_initcall instead. */ -unsigned long __trampinit setup_trampoline(void) +static int __init configure_trampolines(void) { - memcpy(trampoline_base, trampoline_data, TRAMPOLINE_SIZE); - return virt_to_phys(trampoline_base); + size_t size = PAGE_ALIGN(x86_trampoline_end - x86_trampoline_start); + + set_memory_x((unsigned long)x86_trampoline_base, size >> PAGE_SHIFT); + return 0; } +arch_initcall(configure_trampolines); diff --git a/arch/x86/kernel/trampoline_32.S b/arch/x86/kernel/trampoline_32.S index 8508237e8e4..451c0a7ef7f 100644 --- a/arch/x86/kernel/trampoline_32.S +++ b/arch/x86/kernel/trampoline_32.S @@ -32,9 +32,11 @@ #include <asm/segment.h> #include <asm/page_types.h> -/* We can free up trampoline after bootup if cpu hotplug is not supported. */ -__CPUINITRODATA -.code16 +#ifdef CONFIG_SMP + + .section ".x86_trampoline","a" + .balign PAGE_SIZE + .code16 ENTRY(trampoline_data) r_base = . @@ -44,7 +46,7 @@ r_base = . cli # We should be safe anyway - movl $0xA5A5A5A5, trampoline_data - r_base + movl $0xA5A5A5A5, trampoline_status - r_base # write marker for master knows we're running /* GDT tables in non default location kernel can be beyond 16MB and @@ -72,5 +74,10 @@ boot_idt_descr: .word 0 # idt limit = 0 .long 0 # idt base = 0L +ENTRY(trampoline_status) + .long 0 + .globl trampoline_end trampoline_end: + +#endif /* CONFIG_SMP */ diff --git a/arch/x86/kernel/trampoline_64.S b/arch/x86/kernel/trampoline_64.S index 075d130efcf..09ff51799e9 100644 --- a/arch/x86/kernel/trampoline_64.S +++ b/arch/x86/kernel/trampoline_64.S @@ -32,13 +32,9 @@ #include <asm/segment.h> #include <asm/processor-flags.h> -#ifdef CONFIG_ACPI_SLEEP -.section .rodata, "a", @progbits -#else -/* We can free up the trampoline after bootup if cpu hotplug is not supported. */ -__CPUINITRODATA -#endif -.code16 + .section ".x86_trampoline","a" + .balign PAGE_SIZE + .code16 ENTRY(trampoline_data) r_base = . @@ -50,7 +46,7 @@ r_base = . mov %ax, %ss - movl $0xA5A5A5A5, trampoline_data - r_base + movl $0xA5A5A5A5, trampoline_status - r_base # write marker for master knows we're running # Setup stack @@ -64,10 +60,13 @@ r_base = . movzx %ax, %esi # Find the 32bit trampoline location shll $4, %esi - # Fixup the vectors - addl %esi, startup_32_vector - r_base - addl %esi, startup_64_vector - r_base - addl %esi, tgdt + 2 - r_base # Fixup the gdt pointer + # Fixup the absolute vectors + leal (startup_32 - r_base)(%esi), %eax + movl %eax, startup_32_vector - r_base + leal (startup_64 - r_base)(%esi), %eax + movl %eax, startup_64_vector - r_base + leal (tgdt - r_base)(%esi), %eax + movl %eax, (tgdt + 2 - r_base) /* * GDT tables in non default location kernel can be beyond 16MB and @@ -129,6 +128,7 @@ no_longmode: jmp no_longmode #include "verify_cpu.S" + .balign 4 # Careful these need to be in the same 64K segment as the above; tidt: .word 0 # idt limit = 0 @@ -156,6 +156,10 @@ startup_64_vector: .long startup_64 - r_base .word __KERNEL_CS, 0 + .balign 4 +ENTRY(trampoline_status) + .long 0 + trampoline_stack: .org 0x1000 trampoline_stack_end: diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index ffe5755caa8..9335bf7dd2e 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -427,7 +427,7 @@ unsigned long native_calibrate_tsc(void) * the delta to the previous read. We keep track of the min * and max values of that delta. The delta is mostly defined * by the IO time of the PIT access, so we can detect when a - * SMI/SMM disturbance happend between the two reads. If the + * SMI/SMM disturbance happened between the two reads. If the * maximum time is significantly larger than the minimum time, * then we discard the result and have another try. * @@ -900,7 +900,7 @@ static DECLARE_DELAYED_WORK(tsc_irqwork, tsc_refine_calibration_work); * timer based, instead of loop based, we don't block the boot * process while this longer calibration is done. * - * If there are any calibration anomolies (too many SMIs, etc), + * If there are any calibration anomalies (too many SMIs, etc), * or the refined calibration is off by 1% of the fast early * calibration, we throw out the new calibration and use the * early calibration. diff --git a/arch/x86/kernel/verify_cpu.S b/arch/x86/kernel/verify_cpu.S index 0edefc19a11..b9242bacbe5 100644 --- a/arch/x86/kernel/verify_cpu.S +++ b/arch/x86/kernel/verify_cpu.S @@ -18,7 +18,7 @@ * This file is expected to run in 32bit code. Currently: * * arch/x86/boot/compressed/head_64.S: Boot cpu verification - * arch/x86/kernel/trampoline_64.S: secondary processor verfication + * arch/x86/kernel/trampoline_64.S: secondary processor verification * arch/x86/kernel/head_32.S: processor startup * * verify_cpu, returns the status of longmode and SSE in register %eax. diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 0381e1f3bae..624a2016198 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -231,7 +231,7 @@ SECTIONS * output PHDR, so the next output section - .init.text - should * start another segment - init. */ - PERCPU_VADDR(0, :percpu) + PERCPU_VADDR(INTERNODE_CACHE_BYTES, 0, :percpu) #endif INIT_TEXT_SECTION(PAGE_SIZE) @@ -241,6 +241,18 @@ SECTIONS INIT_DATA_SECTION(16) + /* + * Code and data for a variety of lowlevel trampolines, to be + * copied into base memory (< 1 MiB) during initialization. + * Since it is copied early, the main copy can be discarded + * afterwards. + */ + .x86_trampoline : AT(ADDR(.x86_trampoline) - LOAD_OFFSET) { + x86_trampoline_start = .; + *(.x86_trampoline) + x86_trampoline_end = .; + } + .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) { __x86_cpu_dev_start = .; *(.x86_cpu_dev.init) @@ -292,6 +304,7 @@ SECTIONS *(.iommu_table) __iommu_table_end = .; } + . = ALIGN(8); /* * .exit.text is discard at runtime, not link time, to deal with @@ -306,7 +319,7 @@ SECTIONS } #if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP) - PERCPU(PAGE_SIZE) + PERCPU(INTERNODE_CACHE_BYTES, PAGE_SIZE) #endif . = ALIGN(PAGE_SIZE); diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c index 547128546cc..a3911343976 100644 --- a/arch/x86/kernel/xsave.c +++ b/arch/x86/kernel/xsave.c @@ -53,7 +53,7 @@ void __sanitize_i387_state(struct task_struct *tsk) /* * None of the feature bits are in init state. So nothing else - * to do for us, as the memory layout is upto date. + * to do for us, as the memory layout is up to date. */ if ((xstate_bv & pcntxt_mask) == pcntxt_mask) return; |