summaryrefslogtreecommitdiffstats
path: root/arch/x86/mm/init.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/mm/init.c')
-rw-r--r--arch/x86/mm/init.c148
1 files changed, 123 insertions, 25 deletions
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 04664cdb7fd..f9713061811 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -53,12 +53,12 @@ __ref void *alloc_low_pages(unsigned int num)
if ((pgt_buf_end + num) > pgt_buf_top || !can_use_brk_pgt) {
unsigned long ret;
if (min_pfn_mapped >= max_pfn_mapped)
- panic("alloc_low_page: ran out of memory");
+ panic("alloc_low_pages: ran out of memory");
ret = memblock_find_in_range(min_pfn_mapped << PAGE_SHIFT,
max_pfn_mapped << PAGE_SHIFT,
PAGE_SIZE * num , PAGE_SIZE);
if (!ret)
- panic("alloc_low_page: can not alloc memory");
+ panic("alloc_low_pages: can not alloc memory");
memblock_reserve(ret, PAGE_SIZE * num);
pfn = ret >> PAGE_SHIFT;
} else {
@@ -399,29 +399,46 @@ static unsigned long __init init_range_memory_mapping(
return mapped_ram_size;
}
-/* (PUD_SHIFT-PMD_SHIFT)/2 */
-#define STEP_SIZE_SHIFT 5
-void __init init_mem_mapping(void)
+static unsigned long __init get_new_step_size(unsigned long step_size)
+{
+ /*
+ * Explain why we shift by 5 and why we don't have to worry about
+ * 'step_size << 5' overflowing:
+ *
+ * initial mapped size is PMD_SIZE (2M).
+ * We can not set step_size to be PUD_SIZE (1G) yet.
+ * In worse case, when we cross the 1G boundary, and
+ * PG_LEVEL_2M is not set, we will need 1+1+512 pages (2M + 8k)
+ * to map 1G range with PTE. Use 5 as shift for now.
+ *
+ * Don't need to worry about overflow, on 32bit, when step_size
+ * is 0, round_down() returns 0 for start, and that turns it
+ * into 0x100000000ULL.
+ */
+ return step_size << 5;
+}
+
+/**
+ * memory_map_top_down - Map [map_start, map_end) top down
+ * @map_start: start address of the target memory range
+ * @map_end: end address of the target memory range
+ *
+ * This function will setup direct mapping for memory range
+ * [map_start, map_end) in top-down. That said, the page tables
+ * will be allocated at the end of the memory, and we map the
+ * memory in top-down.
+ */
+static void __init memory_map_top_down(unsigned long map_start,
+ unsigned long map_end)
{
- unsigned long end, real_end, start, last_start;
+ unsigned long real_end, start, last_start;
unsigned long step_size;
unsigned long addr;
unsigned long mapped_ram_size = 0;
unsigned long new_mapped_ram_size;
- probe_page_size_mask();
-
-#ifdef CONFIG_X86_64
- end = max_pfn << PAGE_SHIFT;
-#else
- end = max_low_pfn << PAGE_SHIFT;
-#endif
-
- /* the ISA range is always mapped regardless of memory holes */
- init_memory_mapping(0, ISA_END_ADDRESS);
-
/* xen has big range in reserved near end of ram, skip it at first.*/
- addr = memblock_find_in_range(ISA_END_ADDRESS, end, PMD_SIZE, PMD_SIZE);
+ addr = memblock_find_in_range(map_start, map_end, PMD_SIZE, PMD_SIZE);
real_end = addr + PMD_SIZE;
/* step_size need to be small so pgt_buf from BRK could cover it */
@@ -436,25 +453,106 @@ void __init init_mem_mapping(void)
* end of RAM in [min_pfn_mapped, max_pfn_mapped) used as new pages
* for page table.
*/
- while (last_start > ISA_END_ADDRESS) {
+ while (last_start > map_start) {
if (last_start > step_size) {
start = round_down(last_start - 1, step_size);
- if (start < ISA_END_ADDRESS)
- start = ISA_END_ADDRESS;
+ if (start < map_start)
+ start = map_start;
} else
- start = ISA_END_ADDRESS;
+ start = map_start;
new_mapped_ram_size = init_range_memory_mapping(start,
last_start);
last_start = start;
min_pfn_mapped = last_start >> PAGE_SHIFT;
/* only increase step_size after big range get mapped */
if (new_mapped_ram_size > mapped_ram_size)
- step_size <<= STEP_SIZE_SHIFT;
+ step_size = get_new_step_size(step_size);
mapped_ram_size += new_mapped_ram_size;
}
- if (real_end < end)
- init_range_memory_mapping(real_end, end);
+ if (real_end < map_end)
+ init_range_memory_mapping(real_end, map_end);
+}
+
+/**
+ * memory_map_bottom_up - Map [map_start, map_end) bottom up
+ * @map_start: start address of the target memory range
+ * @map_end: end address of the target memory range
+ *
+ * This function will setup direct mapping for memory range
+ * [map_start, map_end) in bottom-up. Since we have limited the
+ * bottom-up allocation above the kernel, the page tables will
+ * be allocated just above the kernel and we map the memory
+ * in [map_start, map_end) in bottom-up.
+ */
+static void __init memory_map_bottom_up(unsigned long map_start,
+ unsigned long map_end)
+{
+ unsigned long next, new_mapped_ram_size, start;
+ unsigned long mapped_ram_size = 0;
+ /* step_size need to be small so pgt_buf from BRK could cover it */
+ unsigned long step_size = PMD_SIZE;
+
+ start = map_start;
+ min_pfn_mapped = start >> PAGE_SHIFT;
+
+ /*
+ * We start from the bottom (@map_start) and go to the top (@map_end).
+ * The memblock_find_in_range() gets us a block of RAM from the
+ * end of RAM in [min_pfn_mapped, max_pfn_mapped) used as new pages
+ * for page table.
+ */
+ while (start < map_end) {
+ if (map_end - start > step_size) {
+ next = round_up(start + 1, step_size);
+ if (next > map_end)
+ next = map_end;
+ } else
+ next = map_end;
+
+ new_mapped_ram_size = init_range_memory_mapping(start, next);
+ start = next;
+
+ if (new_mapped_ram_size > mapped_ram_size)
+ step_size = get_new_step_size(step_size);
+ mapped_ram_size += new_mapped_ram_size;
+ }
+}
+
+void __init init_mem_mapping(void)
+{
+ unsigned long end;
+
+ probe_page_size_mask();
+
+#ifdef CONFIG_X86_64
+ end = max_pfn << PAGE_SHIFT;
+#else
+ end = max_low_pfn << PAGE_SHIFT;
+#endif
+
+ /* the ISA range is always mapped regardless of memory holes */
+ init_memory_mapping(0, ISA_END_ADDRESS);
+
+ /*
+ * If the allocation is in bottom-up direction, we setup direct mapping
+ * in bottom-up, otherwise we setup direct mapping in top-down.
+ */
+ if (memblock_bottom_up()) {
+ unsigned long kernel_end = __pa_symbol(_end);
+
+ /*
+ * we need two separate calls here. This is because we want to
+ * allocate page tables above the kernel. So we first map
+ * [kernel_end, end) to make memory above the kernel be mapped
+ * as soon as possible. And then use page tables allocated above
+ * the kernel to map [ISA_END_ADDRESS, kernel_end).
+ */
+ memory_map_bottom_up(kernel_end, end);
+ memory_map_bottom_up(ISA_END_ADDRESS, kernel_end);
+ } else {
+ memory_map_top_down(ISA_END_ADDRESS, end);
+ }
#ifdef CONFIG_X86_64
if (max_pfn > max_low_pfn) {