diff options
Diffstat (limited to 'arch/x86/pci/pci.h')
| -rw-r--r-- | arch/x86/pci/pci.h | 149 |
1 files changed, 149 insertions, 0 deletions
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h new file mode 100644 index 00000000000..8c66f275756 --- /dev/null +++ b/arch/x86/pci/pci.h @@ -0,0 +1,149 @@ +/* + * Low-Level PCI Access for i386 machines. + * + * (c) 1999 Martin Mares <mj@ucw.cz> + */ + +#undef DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +#define PCI_PROBE_BIOS 0x0001 +#define PCI_PROBE_CONF1 0x0002 +#define PCI_PROBE_CONF2 0x0004 +#define PCI_PROBE_MMCONF 0x0008 +#define PCI_PROBE_MASK 0x000f +#define PCI_PROBE_NOEARLY 0x0010 + +#define PCI_NO_SORT 0x0100 +#define PCI_BIOS_SORT 0x0200 +#define PCI_NO_CHECKS 0x0400 +#define PCI_USE_PIRQ_MASK 0x0800 +#define PCI_ASSIGN_ROMS 0x1000 +#define PCI_BIOS_IRQ_SCAN 0x2000 +#define PCI_ASSIGN_ALL_BUSSES 0x4000 + +extern unsigned int pci_probe; +extern unsigned long pirq_table_addr; + +enum pci_bf_sort_state { + pci_bf_sort_default, + pci_force_nobf, + pci_force_bf, + pci_dmi_bf, +}; + +/* pci-i386.c */ + +extern unsigned int pcibios_max_latency; + +void pcibios_resource_survey(void); +int pcibios_enable_resources(struct pci_dev *, int); + +/* pci-pc.c */ + +extern int pcibios_last_bus; +extern struct pci_bus *pci_root_bus; +extern struct pci_ops pci_root_ops; + +/* pci-irq.c */ + +struct irq_info { + u8 bus, devfn; /* Bus, device and function */ + struct { + u8 link; /* IRQ line ID, chipset dependent, 0=not routed */ + u16 bitmap; /* Available IRQs */ + } __attribute__((packed)) irq[4]; + u8 slot; /* Slot number, 0=onboard */ + u8 rfu; +} __attribute__((packed)); + +struct irq_routing_table { + u32 signature; /* PIRQ_SIGNATURE should be here */ + u16 version; /* PIRQ_VERSION */ + u16 size; /* Table size in bytes */ + u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */ + u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */ + u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */ + u32 miniport_data; /* Crap */ + u8 rfu[11]; + u8 checksum; /* Modulo 256 checksum must give zero */ + struct irq_info slots[0]; +} __attribute__((packed)); + +extern unsigned int pcibios_irq_mask; + +extern int pcibios_scanned; +extern spinlock_t pci_config_lock; + +extern int (*pcibios_enable_irq)(struct pci_dev *dev); +extern void (*pcibios_disable_irq)(struct pci_dev *dev); + +extern int pci_conf1_write(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 value); +extern int pci_conf1_read(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 *value); + +extern int pci_direct_probe(void); +extern void pci_direct_init(int type); +extern void pci_pcbios_init(void); +extern void pci_mmcfg_init(int type); +extern void pcibios_sort(void); + +/* pci-mmconfig.c */ + +/* Verify the first 16 busses. We assume that systems with more busses + get MCFG right. */ +#define PCI_MMCFG_MAX_CHECK_BUS 16 +extern DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS); + +extern int __init pci_mmcfg_arch_reachable(unsigned int seg, unsigned int bus, + unsigned int devfn); +extern int __init pci_mmcfg_arch_init(void); + +/* + * AMD Fam10h CPUs are buggy, and cannot access MMIO config space + * on their northbrige except through the * %eax register. As such, you MUST + * NOT use normal IOMEM accesses, you need to only use the magic mmio-config + * accessor functions. + * In fact just use pci_config_*, nothing else please. + */ +static inline unsigned char mmio_config_readb(void __iomem *pos) +{ + u8 val; + asm volatile("movb (%1),%%al" : "=a" (val) : "r" (pos)); + return val; +} + +static inline unsigned short mmio_config_readw(void __iomem *pos) +{ + u16 val; + asm volatile("movw (%1),%%ax" : "=a" (val) : "r" (pos)); + return val; +} + +static inline unsigned int mmio_config_readl(void __iomem *pos) +{ + u32 val; + asm volatile("movl (%1),%%eax" : "=a" (val) : "r" (pos)); + return val; +} + +static inline void mmio_config_writeb(void __iomem *pos, u8 val) +{ + asm volatile("movb %%al,(%1)" :: "a" (val), "r" (pos) : "memory"); +} + +static inline void mmio_config_writew(void __iomem *pos, u16 val) +{ + asm volatile("movw %%ax,(%1)" :: "a" (val), "r" (pos) : "memory"); +} + +static inline void mmio_config_writel(void __iomem *pos, u32 val) +{ + asm volatile("movl %%eax,(%1)" :: "a" (val), "r" (pos) : "memory"); +} |