16 files changed, 320 insertions, 302 deletions

diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index c5c8e485fc4..e515e8db842 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -1,5 +1,17 @@
-ifeq ($(CONFIG_X86_32),y)
-include ${srctree}/arch/x86/pci/Makefile_32
-else
-include ${srctree}/arch/x86/pci/Makefile_64
-endif
+obj-y				:= i386.o init.o
+
+obj-$(CONFIG_PCI_BIOS)		+= pcbios.o
+obj-$(CONFIG_PCI_MMCONFIG)	+= mmconfig_$(BITS).o direct.o mmconfig-shared.o
+obj-$(CONFIG_PCI_DIRECT)	+= direct.o
+obj-$(CONFIG_PCI_OLPC)		+= olpc.o
+
+pci-y				:= fixup.o
+pci-$(CONFIG_ACPI)		+= acpi.o
+pci-y				+= legacy.o irq.o
+
+pci-$(CONFIG_X86_VISWS)		+= visws.o
+
+pci-$(CONFIG_X86_NUMAQ)		+= numa.o
+
+obj-y				+= $(pci-y) common.o early.o
+obj-y				+= amd_bus.o
diff --git a/arch/x86/pci/Makefile_32 b/arch/x86/pci/Makefile_32
deleted file mode 100644
index 89ec35d00ef..00000000000
--- a/arch/x86/pci/Makefile_32
+++ /dev/null
@@ -1,24 +0,0 @@
-obj-y				:= i386.o init.o
-
-obj-$(CONFIG_PCI_BIOS)		+= pcbios.o
-obj-$(CONFIG_PCI_MMCONFIG)	+= mmconfig_32.o direct.o mmconfig-shared.o
-obj-$(CONFIG_PCI_DIRECT)	+= direct.o
-obj-$(CONFIG_PCI_OLPC)		+= olpc.o
-
-pci-y				:= fixup.o
-
-# Do not change the ordering here. There is a nasty init function
-# ordering dependency which breaks when you move acpi.o below
-# legacy/irq.o
-pci-$(CONFIG_ACPI)		+= acpi.o
-pci-y				+= legacy.o irq.o
-
-# Careful: VISWS and NUMAQ overrule the pci-y above. The colons are
-# therefor correct. This needs a proper fix by distangling the code.
-pci-$(CONFIG_X86_VISWS)		:= visws.o fixup.o
-pci-$(CONFIG_X86_NUMAQ)		:= numa.o irq.o
-
-# Necessary for NUMAQ as well
-pci-$(CONFIG_NUMA)		+= mp_bus_to_node.o
-
-obj-y				+= $(pci-y) common.o early.o
diff --git a/arch/x86/pci/Makefile_64 b/arch/x86/pci/Makefile_64
deleted file mode 100644
index 8fbd19832cf..00000000000
--- a/arch/x86/pci/Makefile_64
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Makefile for X86_64 specific PCI routines
-#
-# Reuse the i386 PCI subsystem
-#
-EXTRA_CFLAGS += -Iarch/x86/pci
-
-obj-y		:= i386.o
-obj-$(CONFIG_PCI_DIRECT)+= direct.o
-obj-y		+= fixup.o init.o
-obj-$(CONFIG_ACPI)	+= acpi.o
-obj-y			+= legacy.o irq.o common.o early.o
-# mmconfig has a 64bit special
-obj-$(CONFIG_PCI_MMCONFIG) += mmconfig_64.o direct.o mmconfig-shared.o
-
-obj-y		+= k8-bus_64.o
-
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index d95de2f199c..19af06927fb 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -171,8 +171,11 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
 	if (node != -1)
 		set_mp_bus_to_node(busnum, node);
 	else
-		node = get_mp_bus_to_node(busnum);
 #endif
+		node = get_mp_bus_to_node(busnum);
+
+	if (node != -1 && !node_online(node))
+		node = -1;
 
 	/* Allocate per-root-bus (not per bus) arch-specific data.
 	 * TODO: leak; this memory is never freed.
@@ -204,22 +207,23 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
 	if (!bus)
 		kfree(sd);
 
+	if (bus && node != -1) {
 #ifdef CONFIG_ACPI_NUMA
-	if (bus) {
-		if (pxm >= 0) {
+		if (pxm >= 0)
 			printk(KERN_DEBUG "bus %02x -> pxm %d -> node %d\n",
-				busnum, pxm, pxm_to_node(pxm));
-		}
-	}
+				busnum, pxm, node);
+#else
+		printk(KERN_DEBUG "bus %02x -> node %d\n",
+			busnum, node);
 #endif
+	}
 
 	if (bus && (pci_probe & PCI_USE__CRS))
 		get_current_resources(device, busnum, domain, bus);
 	return bus;
 }
 
-extern int pci_routeirq;
-static int __init pci_acpi_init(void)
+int __init pci_acpi_init(void)
 {
 	struct pci_dev *dev = NULL;
 
@@ -253,4 +257,3 @@ static int __init pci_acpi_init(void)
 
 	return 0;
 }
-subsys_initcall(pci_acpi_init);
diff --git a/arch/x86/pci/k8-bus_64.c b/arch/x86/pci/amd_bus.c
index 5c2799c20e4..a18141ae3f0 100644
--- a/arch/x86/pci/k8-bus_64.c
+++ b/arch/x86/pci/amd_bus.c
@@ -1,40 +1,25 @@
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <linux/topology.h>
+#include "pci.h"
+
+#ifdef CONFIG_X86_64
 #include <asm/pci-direct.h>
 #include <asm/mpspec.h>
 #include <linux/cpumask.h>
-#include <linux/topology.h>
+#endif
 
 /*
  * This discovers the pcibus <-> node mapping on AMD K8.
  * also get peer root bus resource for io,mmio
  */
 
-
-/*
- * sub bus (transparent) will use entres from 3 to store extra from root,
- * so need to make sure have enought slot there, increase PCI_BUS_NUM_RESOURCES?
- */
-#define RES_NUM 16
-struct pci_root_info {
-	char name[12];
-	unsigned int res_num;
-	struct resource res[RES_NUM];
-	int bus_min;
-	int bus_max;
-	int node;
-	int link;
-};
-
-/* 4 at this time, it may become to 32 */
-#define PCI_ROOT_NR 4
-static int pci_root_num;
-static struct pci_root_info pci_root_info[PCI_ROOT_NR];
-
 #ifdef CONFIG_NUMA
 
 #define BUS_NR 256
 
+#ifdef CONFIG_X86_64
+
 static int mp_bus_to_node[BUS_NR];
 
 void set_mp_bus_to_node(int busnum, int node)
@@ -61,7 +46,52 @@ int get_mp_bus_to_node(int busnum)
 
 	return node;
 }
-#endif
+
+#else /* CONFIG_X86_32 */
+
+static unsigned char mp_bus_to_node[BUS_NR];
+
+void set_mp_bus_to_node(int busnum, int node)
+{
+	if (busnum >= 0 &&  busnum < BUS_NR)
+	mp_bus_to_node[busnum] = (unsigned char) node;
+}
+
+int get_mp_bus_to_node(int busnum)
+{
+	int node;
+
+	if (busnum < 0 || busnum > (BUS_NR - 1))
+		return 0;
+	node = mp_bus_to_node[busnum];
+	return node;
+}
+
+#endif /* CONFIG_X86_32 */
+
+#endif /* CONFIG_NUMA */
+
+#ifdef CONFIG_X86_64
+
+/*
+ * sub bus (transparent) will use entres from 3 to store extra from root,
+ * so need to make sure have enought slot there, increase PCI_BUS_NUM_RESOURCES?
+ */
+#define RES_NUM 16
+struct pci_root_info {
+	char name[12];
+	unsigned int res_num;
+	struct resource res[RES_NUM];
+	int bus_min;
+	int bus_max;
+	int node;
+	int link;
+};
+
+/* 4 at this time, it may become to 32 */
+#define PCI_ROOT_NR 4
+static int pci_root_num;
+static struct pci_root_info pci_root_info[PCI_ROOT_NR];
 
 void set_pci_bus_resources_arch_default(struct pci_bus *b)
 {
@@ -384,7 +414,7 @@ static int __init early_fill_mp_bus_info(void)
 	/* need to take out [0, TOM) for RAM*/
 	address = MSR_K8_TOP_MEM1;
 	rdmsrl(address, val);
-	end = (val & 0xffffff8000000ULL);
+	end = (val & 0xffffff800000ULL);
 	printk(KERN_INFO "TOM: %016lx aka %ldM\n", end, end>>20);
 	if (end < (1ULL<<32))
 		update_range(range, 0, end - 1);
@@ -478,7 +508,7 @@ static int __init early_fill_mp_bus_info(void)
 		/* TOP_MEM2 */
 		address = MSR_K8_TOP_MEM2;
 		rdmsrl(address, val);
-		end = (val & 0xffffff8000000ULL);
+		end = (val & 0xffffff800000ULL);
 		printk(KERN_INFO "TOM2: %016lx aka %ldM\n", end, end>>20);
 		update_range(range, 1ULL<<32, end - 1);
 	}
@@ -526,3 +556,31 @@ static int __init early_fill_mp_bus_info(void)
 }
 
 postcore_initcall(early_fill_mp_bus_info);
+
+#endif
+
+/* common 32/64 bit code */
+
+#define ENABLE_CF8_EXT_CFG      (1ULL << 46)
+
+static void enable_pci_io_ecs_per_cpu(void *unused)
+{
+	u64 reg;
+	rdmsrl(MSR_AMD64_NB_CFG, reg);
+	if (!(reg & ENABLE_CF8_EXT_CFG)) {
+		reg |= ENABLE_CF8_EXT_CFG;
+		wrmsrl(MSR_AMD64_NB_CFG, reg);
+	}
+}
+
+static int __init enable_pci_io_ecs(void)
+{
+	/* assume all cpus from fam10h have IO ECS */
+        if (boot_cpu_data.x86 < 0x10)
+		return 0;
+	on_each_cpu(enable_pci_io_ecs_per_cpu, NULL, 1, 1);
+	pci_probe |= PCI_HAS_IO_ECS;
+	return 0;
+}
+
+postcore_initcall(enable_pci_io_ecs);
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 940185ecaed..20b9f59f95d 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -328,18 +328,18 @@ static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = {
 #endif
 	{
 		.callback = set_bf_sort,
-		.ident = "HP ProLiant DL360",
+		.ident = "HP ProLiant DL385 G2",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
 		},
 	},
 	{
 		.callback = set_bf_sort,
-		.ident = "HP ProLiant DL380",
+		.ident = "HP ProLiant DL585 G2",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
 		},
 	},
 	{}
@@ -384,7 +384,7 @@ struct pci_bus * __devinit pcibios_scan_root(int busnum)
 
 extern u8 pci_cache_line_size;
 
-static int __init pcibios_init(void)
+int __init pcibios_init(void)
 {
 	struct cpuinfo_x86 *c = &boot_cpu_data;
 
@@ -411,8 +411,6 @@ static int __init pcibios_init(void)
 	return 0;
 }
 
-subsys_initcall(pcibios_init);
-
 char * __devinit  pcibios_setup(char *str)
 {
 	if (!strcmp(str, "off")) {
diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c
index 21d1e0e0d53..9915293500f 100644
--- a/arch/x86/pci/direct.c
+++ b/arch/x86/pci/direct.c
@@ -8,18 +8,21 @@
 #include "pci.h"
 
 /*
- * Functions for accessing PCI configuration space with type 1 accesses
+ * Functions for accessing PCI base (first 256 bytes) and extended
+ * (4096 bytes per PCI function) configuration space with type 1
+ * accesses.
  */
 
 #define PCI_CONF1_ADDRESS(bus, devfn, reg) \
-	(0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3))
+	(0x80000000 | ((reg & 0xF00) << 16) | (bus << 16) \
+	| (devfn << 8) | (reg & 0xFC))
 
 static int pci_conf1_read(unsigned int seg, unsigned int bus,
 			  unsigned int devfn, int reg, int len, u32 *value)
 {
 	unsigned long flags;
 
-	if ((bus > 255) || (devfn > 255) || (reg > 255)) {
+	if ((bus > 255) || (devfn > 255) || (reg > 4095)) {
 		*value = -1;
 		return -EINVAL;
 	}
@@ -50,7 +53,7 @@ static int pci_conf1_write(unsigned int seg, unsigned int bus,
 {
 	unsigned long flags;
 
-	if ((bus > 255) || (devfn > 255) || (reg > 255)) 
+	if ((bus > 255) || (devfn > 255) || (reg > 4095))
 		return -EINVAL;
 
 	spin_lock_irqsave(&pci_config_lock, flags);
@@ -260,10 +263,18 @@ void __init pci_direct_init(int type)
 		return;
 	printk(KERN_INFO "PCI: Using configuration type %d for base access\n",
 		 type);
-	if (type == 1)
+	if (type == 1) {
 		raw_pci_ops = &pci_direct_conf1;
-	else
-		raw_pci_ops = &pci_direct_conf2;
+		if (raw_pci_ext_ops)
+			return;
+		if (!(pci_probe & PCI_HAS_IO_ECS))
+			return;
+		printk(KERN_INFO "PCI: Using configuration type 1 "
+		       "for extended access\n");
+		raw_pci_ext_ops = &pci_direct_conf1;
+		return;
+	}
+	raw_pci_ops = &pci_direct_conf2;
 }
 
 int __init pci_direct_probe(void)
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 10fb308fded..2aafb67dc5f 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -299,9 +299,9 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 		return -EINVAL;
 
 	prot = pgprot_val(vma->vm_page_prot);
-	if (pat_wc_enabled && write_combine)
+	if (pat_enabled && write_combine)
 		prot |= _PAGE_CACHE_WC;
-	else if (pat_wc_enabled || boot_cpu_data.x86 > 3)
+	else if (pat_enabled || boot_cpu_data.x86 > 3)
 		/*
 		 * ioremap() and ioremap_nocache() defaults to UC MINUS for now.
 		 * To avoid attribute conflicts, request UC MINUS here
@@ -334,7 +334,9 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 		flags = new_flags;
 	}
 
-	if (vma->vm_pgoff <= max_pfn_mapped &&
+	if (((vma->vm_pgoff < max_low_pfn_mapped) ||
+	     (vma->vm_pgoff >= (1UL<<(32 - PAGE_SHIFT)) &&
+	      vma->vm_pgoff < max_pfn_mapped)) &&
 	    ioremap_change_attr((unsigned long)__va(addr), len, flags)) {
 		free_memtype(addr, addr + len);
 		return -EINVAL;
diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c
index b821f4462d9..d6c950f8185 100644
--- a/arch/x86/pci/init.c
+++ b/arch/x86/pci/init.c
@@ -4,7 +4,7 @@
 
 /* arch_initcall has too random ordering, so call the initializers
    in the right sequence from here. */
-static __init int pci_access_init(void)
+static __init int pci_arch_init(void)
 {
 #ifdef CONFIG_PCI_DIRECT
 	int type = 0;
@@ -40,4 +40,4 @@ static __init int pci_access_init(void)
 
 	return 0;
 }
-arch_initcall(pci_access_init);
+arch_initcall(pci_arch_init);
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index ca8df9c260b..dc568c6b83f 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -11,8 +11,8 @@
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/dmi.h>
-#include <asm/io.h>
-#include <asm/smp.h>
+#include <linux/io.h>
+#include <linux/smp.h>
 #include <asm/io_apic.h>
 #include <linux/irq.h>
 #include <linux/acpi.h>
@@ -61,7 +61,7 @@ void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL;
  *  and perform checksum verification.
  */
 
-static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr)
+static inline struct irq_routing_table *pirq_check_routing_table(u8 *addr)
 {
 	struct irq_routing_table *rt;
 	int i;
@@ -74,7 +74,7 @@ static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr)
 	    rt->size < sizeof(struct irq_routing_table))
 		return NULL;
 	sum = 0;
-	for (i=0; i < rt->size; i++)
+	for (i = 0; i < rt->size; i++)
 		sum += addr[i];
 	if (!sum) {
 		DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n", rt);
@@ -100,7 +100,7 @@ static struct irq_routing_table * __init pirq_find_routing_table(void)
 			return rt;
 		printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n");
 	}
-	for(addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) {
+	for (addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) {
 		rt = pirq_check_routing_table(addr);
 		if (rt)
 			return rt;
@@ -122,20 +122,20 @@ static void __init pirq_peer_trick(void)
 	struct irq_info *e;
 
 	memset(busmap, 0, sizeof(busmap));
-	for(i=0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) {
+	for (i = 0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) {
 		e = &rt->slots[i];
 #ifdef DEBUG
 		{
 			int j;
 			DBG(KERN_DEBUG "%02x:%02x slot=%02x", e->bus, e->devfn/8, e->slot);
-			for(j=0; j<4; j++)
+			for (j = 0; j < 4; j++)
 				DBG(" %d:%02x/%04x", j, e->irq[j].link, e->irq[j].bitmap);
 			DBG("\n");
 		}
 #endif
 		busmap[e->bus] = 1;
 	}
-	for(i = 1; i < 256; i++) {
+	for (i = 1; i < 256; i++) {
 		int node;
 		if (!busmap[i] || pci_find_bus(0, i))
 			continue;
@@ -285,7 +285,7 @@ static int pirq_ite_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
 	static const unsigned char pirqmap[4] = { 1, 0, 2, 3 };
 
 	WARN_ON_ONCE(pirq > 4);
-	return read_config_nybble(router,0x43, pirqmap[pirq-1]);
+	return read_config_nybble(router, 0x43, pirqmap[pirq-1]);
 }
 
 static int pirq_ite_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
@@ -314,7 +314,7 @@ static int pirq_opti_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
 
 /*
  * Cyrix: nibble offset 0x5C
- * 0x5C bits 7:4 is INTB bits 3:0 is INTA 
+ * 0x5C bits 7:4 is INTB bits 3:0 is INTA
  * 0x5D bits 7:4 is INTD bits 3:0 is INTC
  */
 static int pirq_cyrix_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
@@ -350,7 +350,7 @@ static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
  *	Apparently there are systems implementing PCI routing table using
  *	link values 0x01-0x04 and others using 0x41-0x44 for PCI INTA..D.
  *	We try our best to handle both link mappings.
- *	
+ *
  *	Currently (2003-05-21) it appears most SiS chipsets follow the
  *	definition of routing registers from the SiS-5595 southbridge.
  *	According to the SiS 5595 datasheets the revision id's of the
@@ -370,7 +370,7 @@ static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
  *
  *	0x62:	USBIRQ:
  *		bit 6 OHCI function disabled (0), enabled (1)
- *	
+ *
  *	0x6a:	ACPI/SCI IRQ: bits 4-6 reserved
  *
  *	0x7e:	Data Acq. Module IRQ - bits 4-6 reserved
@@ -487,9 +487,7 @@ static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq
 	u8 irq;
 	irq = 0;
 	if (pirq <= 4)
-	{
 		irq = read_config_nybble(router, 0x56, pirq - 1);
-	}
 	printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n",
 		dev->vendor, dev->device, pirq, irq);
 	return irq;
@@ -497,12 +495,10 @@ static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq
 
 static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
 {
-	printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n", 
+	printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n",
 		dev->vendor, dev->device, pirq, irq);
 	if (pirq <= 4)
-	{
 		write_config_nybble(router, 0x56, pirq - 1, irq);
-	}
 	return 1;
 }
 
@@ -549,50 +545,49 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route
 	if (pci_dev_present(pirq_440gx))
 		return 0;
 
-	switch(device)
-	{
-		case PCI_DEVICE_ID_INTEL_82371FB_0:
-		case PCI_DEVICE_ID_INTEL_82371SB_0:
-		case PCI_DEVICE_ID_INTEL_82371AB_0:
-		case PCI_DEVICE_ID_INTEL_82371MX:
-		case PCI_DEVICE_ID_INTEL_82443MX_0:
-		case PCI_DEVICE_ID_INTEL_82801AA_0:
-		case PCI_DEVICE_ID_INTEL_82801AB_0:
-		case PCI_DEVICE_ID_INTEL_82801BA_0:
-		case PCI_DEVICE_ID_INTEL_82801BA_10:
-		case PCI_DEVICE_ID_INTEL_82801CA_0:
-		case PCI_DEVICE_ID_INTEL_82801CA_12:
-		case PCI_DEVICE_ID_INTEL_82801DB_0:
-		case PCI_DEVICE_ID_INTEL_82801E_0:
-		case PCI_DEVICE_ID_INTEL_82801EB_0:
-		case PCI_DEVICE_ID_INTEL_ESB_1:
-		case PCI_DEVICE_ID_INTEL_ICH6_0:
-		case PCI_DEVICE_ID_INTEL_ICH6_1:
-		case PCI_DEVICE_ID_INTEL_ICH7_0:
-		case PCI_DEVICE_ID_INTEL_ICH7_1:
-		case PCI_DEVICE_ID_INTEL_ICH7_30:
-		case PCI_DEVICE_ID_INTEL_ICH7_31:
-		case PCI_DEVICE_ID_INTEL_ESB2_0:
-		case PCI_DEVICE_ID_INTEL_ICH8_0:
-		case PCI_DEVICE_ID_INTEL_ICH8_1:
-		case PCI_DEVICE_ID_INTEL_ICH8_2:
-		case PCI_DEVICE_ID_INTEL_ICH8_3:
-		case PCI_DEVICE_ID_INTEL_ICH8_4:
-		case PCI_DEVICE_ID_INTEL_ICH9_0:
-		case PCI_DEVICE_ID_INTEL_ICH9_1:
-		case PCI_DEVICE_ID_INTEL_ICH9_2:
-		case PCI_DEVICE_ID_INTEL_ICH9_3:
-		case PCI_DEVICE_ID_INTEL_ICH9_4:
-		case PCI_DEVICE_ID_INTEL_ICH9_5:
-		case PCI_DEVICE_ID_INTEL_TOLAPAI_0:
-		case PCI_DEVICE_ID_INTEL_ICH10_0:
-		case PCI_DEVICE_ID_INTEL_ICH10_1:
-		case PCI_DEVICE_ID_INTEL_ICH10_2:
-		case PCI_DEVICE_ID_INTEL_ICH10_3:
-			r->name = "PIIX/ICH";
-			r->get = pirq_piix_get;
-			r->set = pirq_piix_set;
-			return 1;
+	switch (device) {
+	case PCI_DEVICE_ID_INTEL_82371FB_0:
+	case PCI_DEVICE_ID_INTEL_82371SB_0:
+	case PCI_DEVICE_ID_INTEL_82371AB_0:
+	case PCI_DEVICE_ID_INTEL_82371MX:
+	case PCI_DEVICE_ID_INTEL_82443MX_0:
+	case PCI_DEVICE_ID_INTEL_82801AA_0:
+	case PCI_DEVICE_ID_INTEL_82801AB_0:
+	case PCI_DEVICE_ID_INTEL_82801BA_0:
+	case PCI_DEVICE_ID_INTEL_82801BA_10:
+	case PCI_DEVICE_ID_INTEL_82801CA_0:
+	case PCI_DEVICE_ID_INTEL_82801CA_12:
+	case PCI_DEVICE_ID_INTEL_82801DB_0:
+	case PCI_DEVICE_ID_INTEL_82801E_0:
+	case PCI_DEVICE_ID_INTEL_82801EB_0:
+	case PCI_DEVICE_ID_INTEL_ESB_1:
+	case PCI_DEVICE_ID_INTEL_ICH6_0:
+	case PCI_DEVICE_ID_INTEL_ICH6_1:
+	case PCI_DEVICE_ID_INTEL_ICH7_0:
+	case PCI_DEVICE_ID_INTEL_ICH7_1:
+	case PCI_DEVICE_ID_INTEL_ICH7_30:
+	case PCI_DEVICE_ID_INTEL_ICH7_31:
+	case PCI_DEVICE_ID_INTEL_ESB2_0:
+	case PCI_DEVICE_ID_INTEL_ICH8_0:
+	case PCI_DEVICE_ID_INTEL_ICH8_1:
+	case PCI_DEVICE_ID_INTEL_ICH8_2:
+	case PCI_DEVICE_ID_INTEL_ICH8_3:
+	case PCI_DEVICE_ID_INTEL_ICH8_4:
+	case PCI_DEVICE_ID_INTEL_ICH9_0:
+	case PCI_DEVICE_ID_INTEL_ICH9_1:
+	case PCI_DEVICE_ID_INTEL_ICH9_2:
+	case PCI_DEVICE_ID_INTEL_ICH9_3:
+	case PCI_DEVICE_ID_INTEL_ICH9_4:
+	case PCI_DEVICE_ID_INTEL_ICH9_5:
+	case PCI_DEVICE_ID_INTEL_TOLAPAI_0:
+	case PCI_DEVICE_ID_INTEL_ICH10_0:
+	case PCI_DEVICE_ID_INTEL_ICH10_1:
+	case PCI_DEVICE_ID_INTEL_ICH10_2:
+	case PCI_DEVICE_ID_INTEL_ICH10_3:
+		r->name = "PIIX/ICH";
+		r->get = pirq_piix_get;
+		r->set = pirq_piix_set;
+		return 1;
 	}
 	return 0;
 }
@@ -606,7 +601,7 @@ static __init int via_router_probe(struct irq_router *r,
 	 * workarounds for some buggy BIOSes
 	 */
 	if (device == PCI_DEVICE_ID_VIA_82C586_0) {
-		switch(router->device) {
+		switch (router->device) {
 		case PCI_DEVICE_ID_VIA_82C686:
 			/*
 			 * Asus k7m bios wrongly reports 82C686A
@@ -631,7 +626,7 @@ static __init int via_router_probe(struct irq_router *r,
 		}
 	}
 
-	switch(device) {
+	switch (device) {
 	case PCI_DEVICE_ID_VIA_82C586_0:
 		r->name = "VIA";
 		r->get = pirq_via586_get;
@@ -654,13 +649,12 @@ static __init int via_router_probe(struct irq_router *r,
 
 static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
 {
-	switch(device)
-	{
-		case PCI_DEVICE_ID_VLSI_82C534:
-			r->name = "VLSI 82C534";
-			r->get = pirq_vlsi_get;
-			r->set = pirq_vlsi_set;
-			return 1;
+	switch (device) {
+	case PCI_DEVICE_ID_VLSI_82C534:
+		r->name = "VLSI 82C534";
+		r->get = pirq_vlsi_get;
+		r->set = pirq_vlsi_set;
+		return 1;
 	}
 	return 0;
 }
@@ -668,14 +662,13 @@ static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router
 
 static __init int serverworks_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
 {
-	switch(device)
-	{
-		case PCI_DEVICE_ID_SERVERWORKS_OSB4:
-		case PCI_DEVICE_ID_SERVERWORKS_CSB5:
-			r->name = "ServerWorks";
-			r->get = pirq_serverworks_get;
-			r->set = pirq_serverworks_set;
-			return 1;
+	switch (device) {
+	case PCI_DEVICE_ID_SERVERWORKS_OSB4:
+	case PCI_DEVICE_ID_SERVERWORKS_CSB5:
+		r->name = "ServerWorks";
+		r->get = pirq_serverworks_get;
+		r->set = pirq_serverworks_set;
+		return 1;
 	}
 	return 0;
 }
@@ -684,7 +677,7 @@ static __init int sis_router_probe(struct irq_router *r, struct pci_dev *router,
 {
 	if (device != PCI_DEVICE_ID_SI_503)
 		return 0;
-		
+
 	r->name = "SIS";
 	r->get = pirq_sis_get;
 	r->set = pirq_sis_set;
@@ -693,47 +686,43 @@ static __init int sis_router_probe(struct irq_router *r, struct pci_dev *router,
 
 static __init int cyrix_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
 {
-	switch(device)
-	{
-		case PCI_DEVICE_ID_CYRIX_5520:
-			r->name = "NatSemi";
-			r->get = pirq_cyrix_get;
-			r->set = pirq_cyrix_set;
-			return 1;
+	switch (device) {
+	case PCI_DEVICE_ID_CYRIX_5520:
+		r->name = "NatSemi";
+		r->get = pirq_cyrix_get;
+		r->set = pirq_cyrix_set;
+		return 1;
 	}
 	return 0;
 }
 
 static __init int opti_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
 {
-	switch(device)
-	{
-		case PCI_DEVICE_ID_OPTI_82C700:
-			r->name = "OPTI";
-			r->get = pirq_opti_get;
-			r->set = pirq_opti_set;
-			return 1;
+	switch (device) {
+	case PCI_DEVICE_ID_OPTI_82C700:
+		r->name = "OPTI";
+		r->get = pirq_opti_get;
+		r->set = pirq_opti_set;
+		return 1;
 	}
 	return 0;
 }
 
 static __init int ite_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
 {
-	switch(device)
-	{
-		case PCI_DEVICE_ID_ITE_IT8330G_0:
-			r->name = "ITE";
-			r->get = pirq_ite_get;
-			r->set = pirq_ite_set;
-			return 1;
+	switch (device) {
+	case PCI_DEVICE_ID_ITE_IT8330G_0:
+		r->name = "ITE";
+		r->get = pirq_ite_get;
+		r->set = pirq_ite_set;
+		return 1;
 	}
 	return 0;
 }
 
 static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
 {
-	switch(device)
-	{
+	switch (device) {
 	case PCI_DEVICE_ID_AL_M1533:
 	case PCI_DEVICE_ID_AL_M1563:
 		printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n");
@@ -747,25 +736,24 @@ static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router,
 
 static __init int amd_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
 {
-	switch(device)
-	{
-		case PCI_DEVICE_ID_AMD_VIPER_740B:
-			r->name = "AMD756";
-			break;
-		case PCI_DEVICE_ID_AMD_VIPER_7413:
-			r->name = "AMD766";
-			break;
-		case PCI_DEVICE_ID_AMD_VIPER_7443:
-			r->name = "AMD768";
-			break;
-		default:
-			return 0;
+	switch (device) {
+	case PCI_DEVICE_ID_AMD_VIPER_740B:
+		r->name = "AMD756";
+		break;
+	case PCI_DEVICE_ID_AMD_VIPER_7413:
+		r->name = "AMD766";
+		break;
+	case PCI_DEVICE_ID_AMD_VIPER_7443:
+		r->name = "AMD768";
+		break;
+	default:
+		return 0;
 	}
 	r->get = pirq_amd756_get;
 	r->set = pirq_amd756_set;
 	return 1;
 }
-		
+
 static __init int pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
 {
 	switch (device) {
@@ -807,7 +795,7 @@ static struct pci_dev *pirq_router_dev;
  *	FIXME: should we have an option to say "generic for
  *	chipset" ?
  */
- 
+
 static void __init pirq_find_router(struct irq_router *r)
 {
 	struct irq_routing_table *rt = pirq_table;
@@ -826,7 +814,7 @@ static void __init pirq_find_router(struct irq_router *r)
 	r->name = "default";
 	r->get = NULL;
 	r->set = NULL;
-	
+
 	DBG(KERN_DEBUG "PCI: Attempting to find IRQ router for %04x:%04x\n",
 	    rt->rtr_vendor, rt->rtr_device);
 
@@ -837,7 +825,7 @@ static void __init pirq_find_router(struct irq_router *r)
 		return;
 	}
 
-	for( h = pirq_routers; h->vendor; h++) {
+	for (h = pirq_routers; h->vendor; h++) {
 		/* First look for a router match */
 		if (rt->rtr_vendor == h->vendor && h->probe(r, pirq_router_dev, rt->rtr_device))
 			break;
@@ -889,7 +877,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 
 	if (!pirq_table)
 		return 0;
-	
+
 	DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin);
 	info = pirq_get_info(dev);
 	if (!info) {
@@ -928,8 +916,10 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 	 */
 	newirq = dev->irq;
 	if (newirq && !((1 << newirq) & mask)) {
-		if ( pci_probe & PCI_USE_PIRQ_MASK) newirq = 0;
-		else printk("\n" KERN_WARNING
+		if (pci_probe & PCI_USE_PIRQ_MASK)
+			newirq = 0;
+		else
+			printk("\n" KERN_WARNING
 			"PCI: IRQ %i for device %s doesn't match PIRQ mask "
 			"- try pci=usepirqmask\n" KERN_DEBUG, newirq,
 			pci_name(dev));
@@ -949,8 +939,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 		irq = pirq & 0xf;
 		DBG(" -> hardcoded IRQ %d\n", irq);
 		msg = "Hardcoded";
-	} else if ( r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
-	((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask)) ) {
+	} else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
+	((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) {
 		DBG(" -> got IRQ %d\n", irq);
 		msg = "Found";
 		eisa_set_level_irq(irq);
@@ -985,15 +975,15 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 			continue;
 		if (info->irq[pin].link == pirq) {
 			/* We refuse to override the dev->irq information. Give a warning! */
-		    	if ( dev2->irq && dev2->irq != irq && \
+			if (dev2->irq && dev2->irq != irq && \
 			(!(pci_probe & PCI_USE_PIRQ_MASK) || \
-			((1 << dev2->irq) & mask)) ) {
+			((1 << dev2->irq) & mask))) {
 #ifndef CONFIG_PCI_MSI
-		    		printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n",
+				printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n",
 				       pci_name(dev2), dev2->irq, irq);
 #endif
-		    		continue;
-		    	}
+				continue;
+			}
 			dev2->irq = irq;
 			pirq_penalty[irq]++;
 			if (dev != dev2)
@@ -1031,8 +1021,7 @@ static void __init pcibios_fixup_irqs(void)
 		/*
 		 * Recalculate IRQ numbers if we use the I/O APIC.
 		 */
-		if (io_apic_assign_pci_irqs)
-		{
+		if (io_apic_assign_pci_irqs) {
 			int irq;
 
 			if (pin) {
@@ -1045,10 +1034,10 @@ static void __init pcibios_fixup_irqs(void)
 	 * busses itself so we should get into this branch reliably.
 	 */
 				if (irq < 0 && dev->bus->parent) { /* go back to the bridge */
-					struct pci_dev * bridge = dev->bus->self;
+					struct pci_dev *bridge = dev->bus->self;
 
 					pin = (pin + PCI_SLOT(dev->devfn)) % 4;
-					irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, 
+					irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
 							PCI_SLOT(bridge->devfn), pin);
 					if (irq >= 0)
 						printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
@@ -1118,7 +1107,7 @@ static struct dmi_system_id __initdata pciirq_dmi_table[] = {
 	{ }
 };
 
-static int __init pcibios_irq_init(void)
+int __init pcibios_irq_init(void)
 {
 	DBG(KERN_DEBUG "PCI: IRQ init\n");
 
@@ -1138,7 +1127,7 @@ static int __init pcibios_irq_init(void)
 		pirq_find_router(&pirq_router);
 		if (pirq_table->exclusive_irqs) {
 			int i;
-			for (i=0; i<16; i++)
+			for (i = 0; i < 16; i++)
 				if (!(pirq_table->exclusive_irqs & (1 << i)))
 					pirq_penalty[i] += 100;
 		}
@@ -1153,9 +1142,6 @@ static int __init pcibios_irq_init(void)
 	return 0;
 }
 
-subsys_initcall(pcibios_irq_init);
-
-
 static void pirq_penalize_isa_irq(int irq, int active)
 {
 	/*
@@ -1203,10 +1189,10 @@ static int pirq_enable_irq(struct pci_dev *dev)
 			 */
 			temp_dev = dev;
 			while (irq < 0 && dev->bus->parent) { /* go back to the bridge */
-				struct pci_dev * bridge = dev->bus->self;
+				struct pci_dev *bridge = dev->bus->self;
 
 				pin = (pin + PCI_SLOT(dev->devfn)) % 4;
-				irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, 
+				irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
 						PCI_SLOT(bridge->devfn), pin);
 				if (irq >= 0)
 					printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c
index a67921ce60a..132876cc6fc 100644
--- a/arch/x86/pci/legacy.c
+++ b/arch/x86/pci/legacy.c
@@ -55,4 +55,18 @@ static int __init pci_legacy_init(void)
 	return 0;
 }
 
-subsys_initcall(pci_legacy_init);
+int __init pci_subsys_init(void)
+{
+#ifdef CONFIG_ACPI
+	pci_acpi_init();
+#endif
+	pci_legacy_init();
+	pcibios_irq_init();
+#ifdef CONFIG_X86_NUMAQ
+	pci_numa_init();
+#endif
+	pcibios_init();
+
+	return 0;
+}
+subsys_initcall(pci_subsys_init);
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 0cfebecf2a8..23faaa890ff 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -374,7 +374,7 @@ reject:
 
 static int __initdata known_bridge;
 
-void __init __pci_mmcfg_init(int early)
+static void __init __pci_mmcfg_init(int early)
 {
 	/* MMCONFIG disabled */
 	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
diff --git a/arch/x86/pci/mp_bus_to_node.c b/arch/x86/pci/mp_bus_to_node.c
deleted file mode 100644
index 022943999b8..00000000000
--- a/arch/x86/pci/mp_bus_to_node.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/topology.h>
-
-#define BUS_NR 256
-
-static unsigned char mp_bus_to_node[BUS_NR];
-
-void set_mp_bus_to_node(int busnum, int node)
-{
-	if (busnum >= 0 &&  busnum < BUS_NR)
-	mp_bus_to_node[busnum] = (unsigned char) node;
-}
-
-int get_mp_bus_to_node(int busnum)
-{
-	int node;
-
-	if (busnum < 0 || busnum > (BUS_NR - 1))
-		return 0;
-	node = mp_bus_to_node[busnum];
-	return node;
-}
diff --git a/arch/x86/pci/numa.c b/arch/x86/pci/numa.c
index d9afbae5092..8b5ca196673 100644
--- a/arch/x86/pci/numa.c
+++ b/arch/x86/pci/numa.c
@@ -6,45 +6,21 @@
 #include <linux/init.h>
 #include <linux/nodemask.h>
 #include <mach_apic.h>
+#include <asm/mpspec.h>
 #include "pci.h"
 
 #define XQUAD_PORTIO_BASE 0xfe400000
 #define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
 
-int mp_bus_id_to_node[MAX_MP_BUSSES];
 #define BUS2QUAD(global) (mp_bus_id_to_node[global])
 
-int mp_bus_id_to_local[MAX_MP_BUSSES];
 #define BUS2LOCAL(global) (mp_bus_id_to_local[global])
 
-void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
-	struct mpc_config_translation *translation)
-{
-	int quad = translation->trans_quad;
-	int local = translation->trans_local;
-
-	mp_bus_id_to_node[m->mpc_busid] = quad;
-	mp_bus_id_to_local[m->mpc_busid] = local;
-	printk(KERN_INFO "Bus #%d is %s (node %d)\n",
-	       m->mpc_busid, name, quad);
-}
-
-int quad_local_to_mp_bus_id [NR_CPUS/4][4];
 #define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
-void mpc_oem_pci_bus(struct mpc_config_bus *m,
-	struct mpc_config_translation *translation)
-{
-	int quad = translation->trans_quad;
-	int local = translation->trans_local;
-
-	quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
-}
 
 /* Where the IO area was mapped on multiquad, always 0 otherwise */
 void *xquad_portio;
-#ifdef CONFIG_X86_NUMAQ
 EXPORT_SYMBOL(xquad_portio);
-#endif
 
 #define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
 
@@ -175,10 +151,13 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
 
-static int __init pci_numa_init(void)
+int __init pci_numa_init(void)
 {
 	int quad;
 
+	if (!found_numaq)
+		return 0;
+
 	raw_pci_ops = &pci_direct_conf1_mq;
 
 	if (pcibios_scanned++)
@@ -197,5 +176,3 @@ static int __init pci_numa_init(void)
 		}
 	return 0;
 }
-
-subsys_initcall(pci_numa_init);
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h
index 720c4c55453..b2270a55b0c 100644
--- a/arch/x86/pci/pci.h
+++ b/arch/x86/pci/pci.h
@@ -27,6 +27,7 @@
 #define PCI_CAN_SKIP_ISA_ALIGN	0x8000
 #define PCI_USE__CRS		0x10000
 #define PCI_CHECK_ENABLE_AMD_MMCONF	0x20000
+#define PCI_HAS_IO_ECS		0x40000
 
 extern unsigned int pci_probe;
 extern unsigned long pirq_table_addr;
@@ -38,9 +39,6 @@ enum pci_bf_sort_state {
 	pci_dmi_bf,
 };
 
-extern void __init dmi_check_pciprobe(void);
-extern void __init dmi_check_skip_isa_align(void);
-
 /* pci-i386.c */
 
 extern unsigned int pcibios_max_latency;
@@ -98,10 +96,19 @@ extern struct pci_raw_ops *raw_pci_ext_ops;
 
 extern struct pci_raw_ops pci_direct_conf1;
 
+/* arch_initcall level */
 extern int pci_direct_probe(void);
 extern void pci_direct_init(int type);
 extern void pci_pcbios_init(void);
 extern int pci_olpc_init(void);
+extern void __init dmi_check_pciprobe(void);
+extern void __init dmi_check_skip_isa_align(void);
+
+/* some common used subsys_initcalls */
+extern int __init pci_acpi_init(void);
+extern int __init pcibios_irq_init(void);
+extern int __init pci_numa_init(void);
+extern int __init pcibios_init(void);
 
 /* pci-mmconfig.c */
 
diff --git a/arch/x86/pci/visws.c b/arch/x86/pci/visws.c
index c2df4e97eed..1a7bed492bb 100644
--- a/arch/x86/pci/visws.c
+++ b/arch/x86/pci/visws.c
@@ -8,18 +8,19 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 
-#include "cobalt.h"
-#include "lithium.h"
+#include <asm/setup.h>
+#include <asm/visws/cobalt.h>
+#include <asm/visws/lithium.h>
 
 #include "pci.h"
 
 static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; }
 static void pci_visws_disable_irq(struct pci_dev *dev) { }
 
-int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq;
-void (*pcibios_disable_irq)(struct pci_dev *dev) = &pci_visws_disable_irq;
+/* int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq; */
+/* void (*pcibios_disable_irq)(struct pci_dev *dev) = &pci_visws_disable_irq; */
 
-void __init pcibios_penalize_isa_irq(int irq, int active) {}
+/* void __init pcibios_penalize_isa_irq(int irq, int active) {} */
 
 
 unsigned int pci_bus0, pci_bus1;
@@ -85,7 +86,7 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq)
 	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
 }
 
-static int __init pcibios_init(void)
+static int __init pci_visws_init(void)
 {
 	/* The VISWS supports configuration access type 1 only */
 	pci_probe = (pci_probe | PCI_PROBE_CONF1) &
@@ -105,4 +106,17 @@ static int __init pcibios_init(void)
 	return 0;
 }
 
-subsys_initcall(pcibios_init);
+static __init int pci_subsys_init(void)
+{
+	if (!is_visws_box())
+		return -1;
+
+	pcibios_enable_irq = &pci_visws_enable_irq;
+	pcibios_disable_irq = &pci_visws_disable_irq;
+
+	pci_visws_init();
+	pcibios_init();
+
+	return 0;
+}
+subsys_initcall(pci_subsys_init);