diff options
Diffstat (limited to 'arch/x86/pci')
-rw-r--r-- | arch/x86/pci/Makefile | 7 | ||||
-rw-r--r-- | arch/x86/pci/acpi.c | 178 | ||||
-rw-r--r-- | arch/x86/pci/amd_bus.c | 127 | ||||
-rw-r--r-- | arch/x86/pci/broadcom_bus.c | 101 | ||||
-rw-r--r-- | arch/x86/pci/bus_numa.c | 28 | ||||
-rw-r--r-- | arch/x86/pci/bus_numa.h | 12 | ||||
-rw-r--r-- | arch/x86/pci/common.c | 12 | ||||
-rw-r--r-- | arch/x86/pci/direct.c | 16 | ||||
-rw-r--r-- | arch/x86/pci/i386.c | 29 | ||||
-rw-r--r-- | arch/x86/pci/init.c | 8 | ||||
-rw-r--r-- | arch/x86/pci/irq.c | 24 | ||||
-rw-r--r-- | arch/x86/pci/legacy.c | 66 | ||||
-rw-r--r-- | arch/x86/pci/mmconfig-shared.c | 35 | ||||
-rw-r--r-- | arch/x86/pci/mmconfig_32.c | 8 | ||||
-rw-r--r-- | arch/x86/pci/mrst.c | 267 | ||||
-rw-r--r-- | arch/x86/pci/numaq_32.c | 20 | ||||
-rw-r--r-- | arch/x86/pci/olpc.c | 3 | ||||
-rw-r--r-- | arch/x86/pci/pcbios.c | 9 | ||||
-rw-r--r-- | arch/x86/pci/visws.c | 6 |
19 files changed, 637 insertions, 319 deletions
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile index 39fba37f702..a0207a7fdf3 100644 --- a/arch/x86/pci/Makefile +++ b/arch/x86/pci/Makefile @@ -13,9 +13,12 @@ obj-$(CONFIG_X86_VISWS) += visws.o obj-$(CONFIG_X86_NUMAQ) += numaq_32.o +obj-$(CONFIG_X86_MRST) += mrst.o + obj-y += common.o early.o -obj-y += amd_bus.o -obj-$(CONFIG_X86_64) += bus_numa.o +obj-y += amd_bus.o bus_numa.o + +obj-$(CONFIG_PCI_CNB20LE_QUIRK) += broadcom_bus.o ifeq ($(CONFIG_PCI_DEBUG),y) EXTRA_CFLAGS += -DDEBUG diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 959e548a703..2ec04c424a6 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -3,6 +3,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/dmi.h> +#include <linux/slab.h> #include <asm/numa.h> #include <asm/pci_x86.h> @@ -15,19 +16,94 @@ struct pci_root_info { int busnum; }; +static bool pci_use_crs = true; + +static int __init set_use_crs(const struct dmi_system_id *id) +{ + pci_use_crs = true; + return 0; +} + +static const struct dmi_system_id pci_use_crs_table[] __initconst = { + /* http://bugzilla.kernel.org/show_bug.cgi?id=14183 */ + { + .callback = set_use_crs, + .ident = "IBM System x3800", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "IBM"), + DMI_MATCH(DMI_PRODUCT_NAME, "x3800"), + }, + }, + {} +}; + +void __init pci_acpi_crs_quirks(void) +{ + int year; + + if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year < 2008) + pci_use_crs = false; + + dmi_check_system(pci_use_crs_table); + + /* + * If the user specifies "pci=use_crs" or "pci=nocrs" explicitly, that + * takes precedence over anything we figured out above. + */ + if (pci_probe & PCI_ROOT_NO_CRS) + pci_use_crs = false; + else if (pci_probe & PCI_USE__CRS) + pci_use_crs = true; + + printk(KERN_INFO "PCI: %s host bridge windows from ACPI; " + "if necessary, use \"pci=%s\" and report a bug\n", + pci_use_crs ? "Using" : "Ignoring", + pci_use_crs ? "nocrs" : "use_crs"); +} + static acpi_status resource_to_addr(struct acpi_resource *resource, struct acpi_resource_address64 *addr) { acpi_status status; - - status = acpi_resource_to_address64(resource, addr); - if (ACPI_SUCCESS(status) && - (addr->resource_type == ACPI_MEMORY_RANGE || - addr->resource_type == ACPI_IO_RANGE) && - addr->address_length > 0 && - addr->producer_consumer == ACPI_PRODUCER) { + struct acpi_resource_memory24 *memory24; + struct acpi_resource_memory32 *memory32; + struct acpi_resource_fixed_memory32 *fixed_memory32; + + memset(addr, 0, sizeof(*addr)); + switch (resource->type) { + case ACPI_RESOURCE_TYPE_MEMORY24: + memory24 = &resource->data.memory24; + addr->resource_type = ACPI_MEMORY_RANGE; + addr->minimum = memory24->minimum; + addr->address_length = memory24->address_length; + addr->maximum = addr->minimum + addr->address_length - 1; + return AE_OK; + case ACPI_RESOURCE_TYPE_MEMORY32: + memory32 = &resource->data.memory32; + addr->resource_type = ACPI_MEMORY_RANGE; + addr->minimum = memory32->minimum; + addr->address_length = memory32->address_length; + addr->maximum = addr->minimum + addr->address_length - 1; return AE_OK; + case ACPI_RESOURCE_TYPE_FIXED_MEMORY32: + fixed_memory32 = &resource->data.fixed_memory32; + addr->resource_type = ACPI_MEMORY_RANGE; + addr->minimum = fixed_memory32->address; + addr->address_length = fixed_memory32->address_length; + addr->maximum = addr->minimum + addr->address_length - 1; + return AE_OK; + case ACPI_RESOURCE_TYPE_ADDRESS16: + case ACPI_RESOURCE_TYPE_ADDRESS32: + case ACPI_RESOURCE_TYPE_ADDRESS64: + status = acpi_resource_to_address64(resource, addr); + if (ACPI_SUCCESS(status) && + (addr->resource_type == ACPI_MEMORY_RANGE || + addr->resource_type == ACPI_IO_RANGE) && + addr->address_length > 0) { + return AE_OK; + } + break; } return AE_ERROR; } @@ -45,44 +121,6 @@ count_resource(struct acpi_resource *acpi_res, void *data) return AE_OK; } -static int -bus_has_transparent_bridge(struct pci_bus *bus) -{ - struct pci_dev *dev; - - list_for_each_entry(dev, &bus->devices, bus_list) { - u16 class = dev->class >> 8; - - if (class == PCI_CLASS_BRIDGE_PCI && dev->transparent) - return true; - } - return false; -} - -static void -align_resource(struct acpi_device *bridge, struct resource *res) -{ - int align = (res->flags & IORESOURCE_MEM) ? 16 : 4; - - /* - * Host bridge windows are not BARs, but the decoders on the PCI side - * that claim this address space have starting alignment and length - * constraints, so fix any obvious BIOS goofs. - */ - if (!IS_ALIGNED(res->start, align)) { - dev_printk(KERN_DEBUG, &bridge->dev, - "host bridge window %pR invalid; " - "aligning start to %d-byte boundary\n", res, align); - res->start &= ~(align - 1); - } - if (!IS_ALIGNED(res->end + 1, align)) { - dev_printk(KERN_DEBUG, &bridge->dev, - "host bridge window %pR invalid; " - "aligning end to %d-byte boundary\n", res, align); - res->end = ALIGN(res->end, align) - 1; - } -} - static acpi_status setup_resource(struct acpi_resource *acpi_res, void *data) { @@ -91,13 +129,9 @@ setup_resource(struct acpi_resource *acpi_res, void *data) struct acpi_resource_address64 addr; acpi_status status; unsigned long flags; - struct resource *root; - int max_root_bus_resources = PCI_BUS_NUM_RESOURCES; + struct resource *root, *conflict; u64 start, end; - if (bus_has_transparent_bridge(info->bus)) - max_root_bus_resources -= 3; - status = resource_to_addr(acpi_res, &addr); if (!ACPI_SUCCESS(status)) return AE_OK; @@ -114,16 +148,7 @@ setup_resource(struct acpi_resource *acpi_res, void *data) return AE_OK; start = addr.minimum + addr.translation_offset; - end = start + addr.address_length - 1; - if (info->res_num >= max_root_bus_resources) { - if (pci_probe & PCI_USE__CRS) - printk(KERN_WARNING "PCI: Failed to allocate " - "0x%lx-0x%lx from %s for %s due to _CRS " - "returning more than %d resource descriptors\n", - (unsigned long) start, (unsigned long) end, - root->name, info->name, max_root_bus_resources); - return AE_OK; - } + end = addr.maximum + addr.translation_offset; res = &info->res[info->res_num]; res->name = info->name; @@ -131,19 +156,21 @@ setup_resource(struct acpi_resource *acpi_res, void *data) res->start = start; res->end = end; res->child = NULL; - align_resource(info->bridge, res); - if (!(pci_probe & PCI_USE__CRS)) { + if (!pci_use_crs) { dev_printk(KERN_DEBUG, &info->bridge->dev, "host bridge window %pR (ignored)\n", res); return AE_OK; } - if (insert_resource(root, res)) { + conflict = insert_resource_conflict(root, res); + if (conflict) { dev_err(&info->bridge->dev, - "can't allocate host bridge window %pR\n", res); + "address space collision: host bridge window %pR " + "conflicts with %s %pR\n", + res, conflict->name, conflict); } else { - info->bus->resource[info->res_num] = res; + pci_bus_add_resource(info->bus, res, 0); info->res_num++; if (addr.translation_offset) dev_info(&info->bridge->dev, "host bridge window %pR " @@ -164,10 +191,8 @@ get_current_resources(struct acpi_device *device, int busnum, struct pci_root_info info; size_t size; - if (!(pci_probe & PCI_USE__CRS)) - dev_info(&device->dev, - "ignoring host bridge windows from ACPI; " - "boot with \"pci=use_crs\" to use them\n"); + if (pci_use_crs) + pci_bus_remove_resources(bus); info.bridge = device; info.bus = bus; @@ -182,10 +207,9 @@ get_current_resources(struct acpi_device *device, int busnum, if (!info.res) goto res_alloc_fail; - info.name = kmalloc(16, GFP_KERNEL); + info.name = kasprintf(GFP_KERNEL, "PCI Bus %04x:%02x", domain, busnum); if (!info.name) goto name_alloc_fail; - sprintf(info.name, "PCI Bus %04x:%02x", domain, busnum); info.res_num = 0; acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource, @@ -199,8 +223,11 @@ res_alloc_fail: return; } -struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int domain, int busnum) +struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_pci_root *root) { + struct acpi_device *device = root->device; + int domain = root->segment; + int busnum = root->secondary.start; struct pci_bus *bus; struct pci_sysdata *sd; int node; @@ -282,17 +309,14 @@ int __init pci_acpi_init(void) { struct pci_dev *dev = NULL; - if (pcibios_scanned) - return 0; - if (acpi_noirq) - return 0; + return -ENODEV; printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n"); acpi_irq_penalty_init(); - pcibios_scanned++; pcibios_enable_irq = acpi_pci_irq_enable; pcibios_disable_irq = acpi_pci_irq_disable; + x86_init.pci.init_irq = x86_init_noop; if (pci_routeirq) { /* diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index 95ecbd49595..fc1e8fe07e5 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -2,11 +2,11 @@ #include <linux/pci.h> #include <linux/topology.h> #include <linux/cpu.h> +#include <linux/range.h> + #include <asm/pci_x86.h> -#ifdef CONFIG_X86_64 #include <asm/pci-direct.h> -#endif #include "bus_numa.h" @@ -15,60 +15,6 @@ * also get peer root bus resource for io,mmio */ -#ifdef CONFIG_X86_64 - -#define RANGE_NUM 16 - -struct res_range { - size_t start; - size_t end; -}; - -static void __init update_range(struct res_range *range, size_t start, - size_t end) -{ - int i; - int j; - - for (j = 0; j < RANGE_NUM; j++) { - if (!range[j].end) - continue; - - if (start <= range[j].start && end >= range[j].end) { - range[j].start = 0; - range[j].end = 0; - continue; - } - - if (start <= range[j].start && end < range[j].end && range[j].start < end + 1) { - range[j].start = end + 1; - continue; - } - - - if (start > range[j].start && end >= range[j].end && range[j].end > start - 1) { - range[j].end = start - 1; - continue; - } - - if (start > range[j].start && end < range[j].end) { - /* find the new spare */ - for (i = 0; i < RANGE_NUM; i++) { - if (range[i].end == 0) - break; - } - if (i < RANGE_NUM) { - range[i].end = range[j].end; - range[i].start = end + 1; - } else { - printk(KERN_ERR "run of slot in ranges\n"); - } - range[j].end = start - 1; - continue; - } - } -} - struct pci_hostbridge_probe { u32 bus; u32 slot; @@ -111,6 +57,8 @@ static void __init get_pci_mmcfg_amd_fam10h_range(void) fam10h_mmconf_end = base + (1ULL<<(segn_busn_bits + 20)) - 1; } +#define RANGE_NUM 16 + /** * early_fill_mp_bus_to_node() * called before pcibios_scan_root and pci_scan_bus @@ -130,16 +78,17 @@ static int __init early_fill_mp_bus_info(void) struct pci_root_info *info; u32 reg; struct resource *res; - size_t start; - size_t end; - struct res_range range[RANGE_NUM]; + u64 start; + u64 end; + struct range range[RANGE_NUM]; u64 val; u32 address; + bool found; if (!early_pci_allowed()) return -1; - found_all_numa_early = 0; + found = false; for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { u32 id; u16 device; @@ -153,12 +102,12 @@ static int __init early_fill_mp_bus_info(void) device = (id>>16) & 0xffff; if (pci_probes[i].vendor == vendor && pci_probes[i].device == device) { - found_all_numa_early = 1; + found = true; break; } } - if (!found_all_numa_early) + if (!found) return 0; pci_root_num = 0; @@ -196,7 +145,7 @@ static int __init early_fill_mp_bus_info(void) def_link = (reg >> 8) & 0x03; memset(range, 0, sizeof(range)); - range[0].end = 0xffff; + add_range(range, RANGE_NUM, 0, 0, 0xffff + 1); /* io port resource */ for (i = 0; i < 4; i++) { reg = read_pci_config(bus, slot, 1, 0xc0 + (i << 3)); @@ -220,13 +169,13 @@ static int __init early_fill_mp_bus_info(void) info = &pci_root_info[j]; printk(KERN_DEBUG "node %d link %d: io port [%llx, %llx]\n", - node, link, (u64)start, (u64)end); + node, link, start, end); /* kernel only handle 16 bit only */ if (end > 0xffff) end = 0xffff; update_res(info, start, end, IORESOURCE_IO, 1); - update_range(range, start, end); + subtract_range(range, RANGE_NUM, start, end + 1); } /* add left over io port range to def node/link, [0, 0xffff] */ /* find the position */ @@ -241,29 +190,32 @@ static int __init early_fill_mp_bus_info(void) if (!range[i].end) continue; - update_res(info, range[i].start, range[i].end, + update_res(info, range[i].start, range[i].end - 1, IORESOURCE_IO, 1); } } memset(range, 0, sizeof(range)); /* 0xfd00000000-0xffffffffff for HT */ - range[0].end = (0xfdULL<<32) - 1; + end = cap_resource((0xfdULL<<32) - 1); + end++; + add_range(range, RANGE_NUM, 0, 0, end); /* need to take out [0, TOM) for RAM*/ address = MSR_K8_TOP_MEM1; rdmsrl(address, val); end = (val & 0xffffff800000ULL); - printk(KERN_INFO "TOM: %016lx aka %ldM\n", end, end>>20); + printk(KERN_INFO "TOM: %016llx aka %lldM\n", end, end>>20); if (end < (1ULL<<32)) - update_range(range, 0, end - 1); + subtract_range(range, RANGE_NUM, 0, end); /* get mmconfig */ get_pci_mmcfg_amd_fam10h_range(); /* need to take out mmconf range */ if (fam10h_mmconf_end) { printk(KERN_DEBUG "Fam 10h mmconf [%llx, %llx]\n", fam10h_mmconf_start, fam10h_mmconf_end); - update_range(range, fam10h_mmconf_start, fam10h_mmconf_end); + subtract_range(range, RANGE_NUM, fam10h_mmconf_start, + fam10h_mmconf_end + 1); } /* mmio resource */ @@ -293,7 +245,7 @@ static int __init early_fill_mp_bus_info(void) info = &pci_root_info[j]; printk(KERN_DEBUG "node %d link %d: mmio [%llx, %llx]", - node, link, (u64)start, (u64)end); + node, link, start, end); /* * some sick allocation would have range overlap with fam10h * mmconf range, so need to update start and end. @@ -318,14 +270,15 @@ static int __init early_fill_mp_bus_info(void) /* we got a hole */ endx = fam10h_mmconf_start - 1; update_res(info, start, endx, IORESOURCE_MEM, 0); - update_range(range, start, endx); - printk(KERN_CONT " ==> [%llx, %llx]", (u64)start, endx); + subtract_range(range, RANGE_NUM, start, + endx + 1); + printk(KERN_CONT " ==> [%llx, %llx]", start, endx); start = fam10h_mmconf_end + 1; changed = 1; } if (changed) { if (start <= end) { - printk(KERN_CONT " %s [%llx, %llx]", endx?"and":"==>", (u64)start, (u64)end); + printk(KERN_CONT " %s [%llx, %llx]", endx ? "and" : "==>", start, end); } else { printk(KERN_CONT "%s\n", endx?"":" ==> none"); continue; @@ -333,8 +286,9 @@ static int __init early_fill_mp_bus_info(void) } } - update_res(info, start, end, IORESOURCE_MEM, 1); - update_range(range, start, end); + update_res(info, cap_resource(start), cap_resource(end), + IORESOURCE_MEM, 1); + subtract_range(range, RANGE_NUM, start, end + 1); printk(KERN_CONT "\n"); } @@ -348,8 +302,8 @@ static int __init early_fill_mp_bus_info(void) address = MSR_K8_TOP_MEM2; rdmsrl(address, val); end = (val & 0xffffff800000ULL); - printk(KERN_INFO "TOM2: %016lx aka %ldM\n", end, end>>20); - update_range(range, 1ULL<<32, end - 1); + printk(KERN_INFO "TOM2: %016llx aka %lldM\n", end, end>>20); + subtract_range(range, RANGE_NUM, 1ULL<<32, end); } /* @@ -368,7 +322,8 @@ static int __init early_fill_mp_bus_info(void) if (!range[i].end) continue; - update_res(info, range[i].start, range[i].end, + update_res(info, cap_resource(range[i].start), + cap_resource(range[i].end - 1), IORESOURCE_MEM, 1); } } @@ -384,24 +339,14 @@ static int __init early_fill_mp_bus_info(void) info->bus_min, info->bus_max, info->node, info->link); for (j = 0; j < res_num; j++) { res = &info->res[j]; - printk(KERN_DEBUG "bus: %02x index %x %s: [%llx, %llx]\n", - busnum, j, - (res->flags & IORESOURCE_IO)?"io port":"mmio", - res->start, res->end); + printk(KERN_DEBUG "bus: %02x index %x %pR\n", + busnum, j, res); } } return 0; } -#else /* !CONFIG_X86_64 */ - -static int __init early_fill_mp_bus_info(void) { return 0; } - -#endif /* !CONFIG_X86_64 */ - -/* common 32/64 bit code */ - #define ENABLE_CF8_EXT_CFG (1ULL << 46) static void enable_pci_io_ecs(void *unused) diff --git a/arch/x86/pci/broadcom_bus.c b/arch/x86/pci/broadcom_bus.c new file mode 100644 index 00000000000..0846a5bbbfb --- /dev/null +++ b/arch/x86/pci/broadcom_bus.c @@ -0,0 +1,101 @@ +/* + * Read address ranges from a Broadcom CNB20LE Host Bridge + * + * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/delay.h> +#include <linux/dmi.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <asm/pci_x86.h> + +#include "bus_numa.h" + +static void __devinit cnb20le_res(struct pci_dev *dev) +{ + struct pci_root_info *info; + struct resource res; + u16 word1, word2; + u8 fbus, lbus; + int i; + + /* + * The x86_pci_root_bus_res_quirks() function already refuses to use + * this information if ACPI _CRS was used. Therefore, we don't bother + * checking if ACPI is enabled, and just generate the information + * for both the ACPI _CRS and no ACPI cases. + */ + + info = &pci_root_info[pci_root_num]; + pci_root_num++; + + /* read the PCI bus numbers */ + pci_read_config_byte(dev, 0x44, &fbus); + pci_read_config_byte(dev, 0x45, &lbus); + info->bus_min = fbus; + info->bus_max = lbus; + + /* + * Add the legacy IDE ports on bus 0 + * + * These do not exist anywhere in the bridge registers, AFAICT. I do + * not have the datasheet, so this is the best I can do. + */ + if (fbus == 0) { + update_res(info, 0x01f0, 0x01f7, IORESOURCE_IO, 0); + update_res(info, 0x03f6, 0x03f6, IORESOURCE_IO, 0); + update_res(info, 0x0170, 0x0177, IORESOURCE_IO, 0); + update_res(info, 0x0376, 0x0376, IORESOURCE_IO, 0); + update_res(info, 0xffa0, 0xffaf, IORESOURCE_IO, 0); + } + + /* read the non-prefetchable memory window */ + pci_read_config_word(dev, 0xc0, &word1); + pci_read_config_word(dev, 0xc2, &word2); + if (word1 != word2) { + res.start = (word1 << 16) | 0x0000; + res.end = (word2 << 16) | 0xffff; + res.flags = IORESOURCE_MEM; + update_res(info, res.start, res.end, res.flags, 0); + } + + /* read the prefetchable memory window */ + pci_read_config_word(dev, 0xc4, &word1); + pci_read_config_word(dev, 0xc6, &word2); + if (word1 != word2) { + res.start = (word1 << 16) | 0x0000; + res.end = (word2 << 16) | 0xffff; + res.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; + update_res(info, res.start, res.end, res.flags, 0); + } + + /* read the IO port window */ + pci_read_config_word(dev, 0xd0, &word1); + pci_read_config_word(dev, 0xd2, &word2); + if (word1 != word2) { + res.start = word1; + res.end = word2; + res.flags = IORESOURCE_IO; + update_res(info, res.start, res.end, res.flags, 0); + } + + /* print information about this host bridge */ + res.start = fbus; + res.end = lbus; + res.flags = IORESOURCE_BUS; + dev_info(&dev->dev, "CNB20LE PCI Host Bridge (domain %04x %pR)\n", + pci_domain_nr(dev->bus), &res); + + for (i = 0; i < info->res_num; i++) + dev_info(&dev->dev, "host bridge window %pR\n", &info->res[i]); +} + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_LE, + cnb20le_res); + diff --git a/arch/x86/pci/bus_numa.c b/arch/x86/pci/bus_numa.c index f939d603adf..64a12288389 100644 --- a/arch/x86/pci/bus_numa.c +++ b/arch/x86/pci/bus_numa.c @@ -1,11 +1,11 @@ #include <linux/init.h> #include <linux/pci.h> +#include <linux/range.h> #include "bus_numa.h" int pci_root_num; struct pci_root_info pci_root_info[PCI_ROOT_NR]; -int found_all_numa_early; void x86_pci_root_bus_res_quirks(struct pci_bus *b) { @@ -21,10 +21,6 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b) if (!pci_root_num) return; - /* for amd, if only one root bus, don't need to do anything */ - if (pci_root_num < 2 && found_all_numa_early) - return; - for (i = 0; i < pci_root_num; i++) { if (pci_root_info[i].bus_min == b->number) break; @@ -36,13 +32,14 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b) printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n", b->number); + pci_bus_remove_resources(b); info = &pci_root_info[i]; for (j = 0; j < info->res_num; j++) { struct resource *res; struct resource *root; res = &info->res[j]; - b->resource[j] = res; + pci_bus_add_resource(b, res, 0); if (res->flags & IORESOURCE_IO) root = &ioport_resource; else @@ -51,8 +48,8 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b) } } -void __devinit update_res(struct pci_root_info *info, size_t start, - size_t end, unsigned long flags, int merge) +void __devinit update_res(struct pci_root_info *info, resource_size_t start, + resource_size_t end, unsigned long flags, int merge) { int i; struct resource *res; @@ -60,25 +57,28 @@ void __devinit update_res(struct pci_root_info *info, size_t start, if (start > end) return; + if (start == MAX_RESOURCE) + return; + if (!merge) goto addit; /* try to merge it with old one */ for (i = 0; i < info->res_num; i++) { - size_t final_start, final_end; - size_t common_start, common_end; + resource_size_t final_start, final_end; + resource_size_t common_start, common_end; res = &info->res[i]; if (res->flags != flags) continue; - common_start = max((size_t)res->start, start); - common_end = min((size_t)res->end, end); + common_start = max(res->start, start); + common_end = min(res->end, end); if (common_start > common_end + 1) continue; - final_start = min((size_t)res->start, start); - final_end = max((size_t)res->end, end); + final_start = min(res->start, start); + final_end = max(res->end, end); res->start = final_start; res->end = final_end; diff --git a/arch/x86/pci/bus_numa.h b/arch/x86/pci/bus_numa.h index adbc23fe82a..804a4b40c31 100644 --- a/arch/x86/pci/bus_numa.h +++ b/arch/x86/pci/bus_numa.h @@ -1,9 +1,8 @@ -#ifdef CONFIG_X86_64 - +#ifndef __BUS_NUMA_H +#define __BUS_NUMA_H /* * sub bus (transparent) will use entres from 3 to store extra from - * root, so need to make sure we have enough slot there, Should we - * increase PCI_BUS_NUM_RESOURCES? + * root, so need to make sure we have enough slot there. */ #define RES_NUM 16 struct pci_root_info { @@ -20,8 +19,7 @@ struct pci_root_info { #define PCI_ROOT_NR 4 extern int pci_root_num; extern struct pci_root_info pci_root_info[PCI_ROOT_NR]; -extern int found_all_numa_early; -extern void update_res(struct pci_root_info *info, size_t start, - size_t end, unsigned long flags, int merge); +extern void update_res(struct pci_root_info *info, resource_size_t start, + resource_size_t end, unsigned long flags, int merge); #endif diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index d2552c68e94..215a27ae050 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -9,6 +9,7 @@ #include <linux/ioport.h> #include <linux/init.h> #include <linux/dmi.h> +#include <linux/slab.h> #include <asm/acpi.h> #include <asm/segment.h> @@ -72,16 +73,10 @@ struct pci_ops pci_root_ops = { }; /* - * legacy, numa, and acpi all want to call pcibios_scan_root - * from their initcalls. This flag prevents that. - */ -int pcibios_scanned; - -/* * This interrupt-safe spinlock protects all accesses to PCI * configuration space. */ -DEFINE_SPINLOCK(pci_config_lock); +DEFINE_RAW_SPINLOCK(pci_config_lock); static int __devinit can_skip_ioresource_align(const struct dmi_system_id *d) { @@ -520,6 +515,9 @@ char * __devinit pcibios_setup(char *str) } else if (!strcmp(str, "use_crs")) { pci_probe |= PCI_USE__CRS; return NULL; + } else if (!strcmp(str, "nocrs")) { + pci_probe |= PCI_ROOT_NO_CRS; + return NULL; } else if (!strcmp(str, "earlydump")) { pci_early_dump_regs = 1; return NULL; diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c index 347d882b3bb..bd33620b007 100644 --- a/arch/x86/pci/direct.c +++ b/arch/x86/pci/direct.c @@ -27,7 +27,7 @@ static int pci_conf1_read(unsigned int seg, unsigned int bus, return -EINVAL; } - spin_lock_irqsave(&pci_config_lock, flags); + raw_spin_lock_irqsave(&pci_config_lock, flags); outl(PCI_CONF1_ADDRESS(bus, devfn, reg), 0xCF8); @@ -43,7 +43,7 @@ static int pci_conf1_read(unsigned int seg, unsigned int bus, break; } - spin_unlock_irqrestore(&pci_config_lock, flags); + raw_spin_unlock_irqrestore(&pci_config_lock, flags); return 0; } @@ -56,7 +56,7 @@ static int pci_conf1_write(unsigned int seg, unsigned int bus, if ((bus > 255) || (devfn > 255) || (reg > 4095)) return -EINVAL; - spin_lock_irqsave(&pci_config_lock, flags); + raw_spin_lock_irqsave(&pci_config_lock, flags); outl(PCI_CONF1_ADDRESS(bus, devfn, reg), 0xCF8); @@ -72,7 +72,7 @@ static int pci_conf1_write(unsigned int seg, unsigned int bus, break; } - spin_unlock_irqrestore(&pci_config_lock, flags); + raw_spin_unlock_irqrestore(&pci_config_lock, flags); return 0; } @@ -108,7 +108,7 @@ static int pci_conf2_read(unsigned int seg, unsigned int bus, if (dev & 0x10) return PCIBIOS_DEVICE_NOT_FOUND; - spin_lock_irqsave(&pci_config_lock, flags); + raw_spin_lock_irqsave(&pci_config_lock, flags); outb((u8)(0xF0 | (fn << 1)), 0xCF8); outb((u8)bus, 0xCFA); @@ -127,7 +127,7 @@ static int pci_conf2_read(unsigned int seg, unsigned int bus, outb(0, 0xCF8); - spin_unlock_irqrestore(&pci_config_lock, flags); + raw_spin_unlock_irqrestore(&pci_config_lock, flags); return 0; } @@ -147,7 +147,7 @@ static int pci_conf2_write(unsigned int seg, unsigned int bus, if (dev & 0x10) return PCIBIOS_DEVICE_NOT_FOUND; - spin_lock_irqsave(&pci_config_lock, flags); + raw_spin_lock_irqsave(&pci_config_lock, flags); outb((u8)(0xF0 | (fn << 1)), 0xCF8); outb((u8)bus, 0xCFA); @@ -166,7 +166,7 @@ static int pci_conf2_write(unsigned int seg, unsigned int bus, outb(0, 0xCF8); - spin_unlock_irqrestore(&pci_config_lock, flags); + raw_spin_unlock_irqrestore(&pci_config_lock, flags); return 0; } diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index 5dc9e8c63fc..55253095be8 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -60,22 +60,23 @@ skip_isa_ioresource_align(struct pci_dev *dev) { * but we want to try to avoid allocating at 0x2900-0x2bff * which might have be mirrored at 0x0100-0x03ff.. */ -void -pcibios_align_resource(void *data, struct resource *res, +resource_size_t +pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; + resource_size_t start = res->start; if (res->flags & IORESOURCE_IO) { - resource_size_t start = res->start; - if (skip_isa_ioresource_align(dev)) - return; - if (start & 0x300) { + return start; + if (start & 0x300) start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } + } else if (res->flags & IORESOURCE_MEM) { + if (start < BIOS_END) + start = BIOS_END; } + return start; } EXPORT_SYMBOL(pcibios_align_resource); @@ -95,6 +96,7 @@ EXPORT_SYMBOL(pcibios_align_resource); * the fact the PCI specs explicitly allow address decoders to be * shared between expansion ROMs and other resource regions, it's * at least dangerous) + * - bad resource sizes or overlaps with other regions * * Our solution: * (1) Allocate resources for all buses behind PCI-to-PCI bridges. @@ -129,15 +131,13 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) continue; if (!r->start || pci_claim_resource(dev, idx) < 0) { - dev_info(&dev->dev, - "can't reserve window %pR\n", - r); /* * Something is wrong with the region. * Invalidate the resource to prevent * child resource allocations in this * range. */ + r->start = r->end = 0; r->flags = 0; } } @@ -183,9 +183,8 @@ static void __init pcibios_allocate_resources(int pass) "BAR %d: reserving %pr (d=%d, p=%d)\n", idx, r, disabled, pass); if (pci_claim_resource(dev, idx) < 0) { - dev_info(&dev->dev, - "can't reserve %pR\n", r); /* We'll assign a new address later */ + dev->fw_addr[idx] = r->start; r->end -= r->start; r->start = 0; } @@ -257,10 +256,6 @@ void __init pcibios_resource_survey(void) */ fs_initcall(pcibios_assign_resources); -void __weak x86_pci_root_bus_res_quirks(struct pci_bus *b) -{ -} - /* * If we set up a device for bus mastering, we need to check the latency * timer as certain crappy BIOSes forget to set it properly. diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c index 25a1f8efed4..adb62aaa7ec 100644 --- a/arch/x86/pci/init.c +++ b/arch/x86/pci/init.c @@ -1,6 +1,7 @@ #include <linux/pci.h> #include <linux/init.h> #include <asm/pci_x86.h> +#include <asm/x86_init.h> /* arch_initcall has too random ordering, so call the initializers in the right sequence from here. */ @@ -15,10 +16,9 @@ static __init int pci_arch_init(void) if (!(pci_probe & PCI_PROBE_NOEARLY)) pci_mmcfg_early_init(); -#ifdef CONFIG_PCI_OLPC - if (!pci_olpc_init()) - return 0; /* skip additional checks if it's an XO */ -#endif + if (x86_init.pci.arch_init && !x86_init.pci.arch_init()) + return 0; + #ifdef CONFIG_PCI_BIOS pci_pcbios_init(); #endif diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index 0696d506c4a..9810a0f76c9 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -8,7 +8,6 @@ #include <linux/kernel.h> #include <linux/pci.h> #include <linux/init.h> -#include <linux/slab.h> #include <linux/interrupt.h> #include <linux/dmi.h> #include <linux/io.h> @@ -53,7 +52,7 @@ struct irq_router_handler { int (*probe)(struct irq_router *r, struct pci_dev *router, u16 device); }; -int (*pcibios_enable_irq)(struct pci_dev *dev) = NULL; +int (*pcibios_enable_irq)(struct pci_dev *dev) = pirq_enable_irq; void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL; /* @@ -604,6 +603,13 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route return 1; } + if ((device >= PCI_DEVICE_ID_INTEL_CPT_LPC_MIN) && + (device <= PCI_DEVICE_ID_INTEL_CPT_LPC_MAX)) { + r->name = "PIIX/ICH"; + r->get = pirq_piix_get; + r->set = pirq_piix_set; + return 1; + } return 0; } @@ -1016,7 +1022,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) return 1; } -static void __init pcibios_fixup_irqs(void) +void __init pcibios_fixup_irqs(void) { struct pci_dev *dev = NULL; u8 pin; @@ -1110,12 +1116,12 @@ static struct dmi_system_id __initdata pciirq_dmi_table[] = { { } }; -int __init pcibios_irq_init(void) +void __init pcibios_irq_init(void) { DBG(KERN_DEBUG "PCI: IRQ init\n"); - if (pcibios_enable_irq || raw_pci_ops == NULL) - return 0; + if (raw_pci_ops == NULL) + return; dmi_check_system(pciirq_dmi_table); @@ -1142,9 +1148,7 @@ int __init pcibios_irq_init(void) pirq_table = NULL; } - pcibios_enable_irq = pirq_enable_irq; - - pcibios_fixup_irqs(); + x86_init.pci.fixup_irqs(); if (io_apic_assign_pci_irqs && pci_routeirq) { struct pci_dev *dev = NULL; @@ -1157,8 +1161,6 @@ int __init pcibios_irq_init(void) for_each_pci_dev(dev) pirq_enable_irq(dev); } - - return 0; } static void pirq_penalize_isa_irq(int irq, int active) diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c index 4061bb0f267..8d460eaf524 100644 --- a/arch/x86/pci/legacy.c +++ b/arch/x86/pci/legacy.c @@ -11,40 +11,23 @@ */ static void __devinit pcibios_fixup_peer_bridges(void) { - int n, devfn; - long node; + int n; if (pcibios_last_bus <= 0 || pcibios_last_bus > 0xff) return; DBG("PCI: Peer bridge fixup\n"); - for (n=0; n <= pcibios_last_bus; n++) { - u32 l; - if (pci_find_bus(0, n)) - continue; - node = get_mp_bus_to_node(n); - for (devfn = 0; devfn < 256; devfn += 8) { - if (!raw_pci_read(0, n, devfn, PCI_VENDOR_ID, 2, &l) && - l != 0x0000 && l != 0xffff) { - DBG("Found device at %02x:%02x [%04x]\n", n, devfn, l); - printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n); - pci_scan_bus_on_node(n, &pci_root_ops, node); - break; - } - } - } + for (n=0; n <= pcibios_last_bus; n++) + pcibios_scan_specific_bus(n); } -static int __init pci_legacy_init(void) +int __init pci_legacy_init(void) { if (!raw_pci_ops) { printk("PCI: System does not support PCI\n"); return 0; } - if (pcibios_scanned++) - return 0; - printk("PCI: Probing PCI hardware\n"); pci_root_bus = pcibios_scan_root(0); if (pci_root_bus) @@ -53,20 +36,39 @@ static int __init pci_legacy_init(void) return 0; } +void pcibios_scan_specific_bus(int busn) +{ + int devfn; + long node; + u32 l; + + if (pci_find_bus(0, busn)) + return; + + node = get_mp_bus_to_node(busn); + for (devfn = 0; devfn < 256; devfn += 8) { + if (!raw_pci_read(0, busn, devfn, PCI_VENDOR_ID, 2, &l) && + l != 0x0000 && l != 0xffff) { + DBG("Found device at %02x:%02x [%04x]\n", busn, devfn, l); + printk(KERN_INFO "PCI: Discovered peer bus %02x\n", busn); + pci_scan_bus_on_node(busn, &pci_root_ops, node); + return; + } + } +} +EXPORT_SYMBOL_GPL(pcibios_scan_specific_bus); + int __init pci_subsys_init(void) { -#ifdef CONFIG_X86_NUMAQ - pci_numaq_init(); -#endif -#ifdef CONFIG_ACPI - pci_acpi_init(); -#endif -#ifdef CONFIG_X86_VISWS - pci_visws_init(); -#endif - pci_legacy_init(); + /* + * The init function returns an non zero value when + * pci_legacy_init should be invoked. + */ + if (x86_init.pci.init()) + pci_legacy_init(); + pcibios_fixup_peer_bridges(); - pcibios_irq_init(); + x86_init.pci.init_irq(); pcibios_init(); return 0; diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index b19d1e54201..a918553ebc7 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -16,6 +16,7 @@ #include <linux/sfi_acpi.h> #include <linux/bitmap.h> #include <linux/dmi.h> +#include <linux/slab.h> #include <asm/e820.h> #include <asm/pci_x86.h> #include <asm/acpi.h> @@ -303,22 +304,17 @@ static void __init pci_mmcfg_check_end_bus_number(void) { struct pci_mmcfg_region *cfg, *cfgx; - /* last one*/ - cfg = list_entry(pci_mmcfg_list.prev, typeof(*cfg), list); - if (cfg) - if (cfg->end_bus < cfg->start_bus) - cfg->end_bus = 255; - - if (list_is_singular(&pci_mmcfg_list)) - return; - - /* don't overlap please */ + /* Fixup overlaps */ list_for_each_entry(cfg, &pci_mmcfg_list, list) { if (cfg->end_bus < cfg->start_bus) cfg->end_bus = 255; + /* Don't access the list head ! */ + if (cfg->list.next == &pci_mmcfg_list) + break; + cfgx = list_entry(cfg->list.next, typeof(*cfg), list); - if (cfg != cfgx && cfg->end_bus >= cfgx->start_bus) + if (cfg->end_bus >= cfgx->start_bus) cfg->end_bus = cfgx->start_bus - 1; } } @@ -487,16 +483,17 @@ static void __init pci_mmcfg_reject_broken(int early) list_for_each_entry(cfg, &pci_mmcfg_list, list) { int valid = 0; - if (!early && !acpi_disabled) + if (!early && !acpi_disabled) { valid = is_mmconf_reserved(is_acpi_reserved, cfg, 0); - if (valid) - continue; - - if (!early) - printk(KERN_ERR FW_BUG PREFIX - "MMCONFIG at %pR not reserved in " - "ACPI motherboard resources\n", &cfg->res); + if (valid) + continue; + else + printk(KERN_ERR FW_BUG PREFIX + "MMCONFIG at %pR not reserved in " + "ACPI motherboard resources\n", + &cfg->res); + } /* Don't try to do this check unless configuration type 1 is available. how about type 2 ?*/ diff --git a/arch/x86/pci/mmconfig_32.c b/arch/x86/pci/mmconfig_32.c index 90d5fd476ed..a3d9c54792a 100644 --- a/arch/x86/pci/mmconfig_32.c +++ b/arch/x86/pci/mmconfig_32.c @@ -64,7 +64,7 @@ err: *value = -1; if (!base) goto err; - spin_lock_irqsave(&pci_config_lock, flags); + raw_spin_lock_irqsave(&pci_config_lock, flags); pci_exp_set_dev_base(base, bus, devfn); @@ -79,7 +79,7 @@ err: *value = -1; *value = mmio_config_readl(mmcfg_virt_addr + reg); break; } - spin_unlock_irqrestore(&pci_config_lock, flags); + raw_spin_unlock_irqrestore(&pci_config_lock, flags); return 0; } @@ -97,7 +97,7 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus, if (!base) return -EINVAL; - spin_lock_irqsave(&pci_config_lock, flags); + raw_spin_lock_irqsave(&pci_config_lock, flags); pci_exp_set_dev_base(base, bus, devfn); @@ -112,7 +112,7 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus, mmio_config_writel(mmcfg_virt_addr + reg, value); break; } - spin_unlock_irqrestore(&pci_config_lock, flags); + raw_spin_unlock_irqrestore(&pci_config_lock, flags); return 0; } diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/mrst.c new file mode 100644 index 00000000000..cb29191cee5 --- /dev/null +++ b/arch/x86/pci/mrst.c @@ -0,0 +1,267 @@ +/* + * Moorestown PCI support + * Copyright (c) 2008 Intel Corporation + * Jesse Barnes <jesse.barnes@intel.com> + * + * Moorestown has an interesting PCI implementation: + * - configuration space is memory mapped (as defined by MCFG) + * - Lincroft devices also have a real, type 1 configuration space + * - Early Lincroft silicon has a type 1 access bug that will cause + * a hang if non-existent devices are accessed + * - some devices have the "fixed BAR" capability, which means + * they can't be relocated or modified; check for that during + * BAR sizing + * + * So, we use the MCFG space for all reads and writes, but also send + * Lincroft writes to type 1 space. But only read/write if the device + * actually exists, otherwise return all 1s for reads and bit bucket + * the writes. + */ + +#include <linux/sched.h> +#include <linux/pci.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/dmi.h> + +#include <asm/acpi.h> +#include <asm/segment.h> +#include <asm/io.h> +#include <asm/smp.h> +#include <asm/pci_x86.h> +#include <asm/hw_irq.h> +#include <asm/io_apic.h> + +#define PCIE_CAP_OFFSET 0x100 + +/* Fixed BAR fields */ +#define PCIE_VNDR_CAP_ID_FIXED_BAR 0x00 /* Fixed BAR (TBD) */ +#define PCI_FIXED_BAR_0_SIZE 0x04 +#define PCI_FIXED_BAR_1_SIZE 0x08 +#define PCI_FIXED_BAR_2_SIZE 0x0c +#define PCI_FIXED_BAR_3_SIZE 0x10 +#define PCI_FIXED_BAR_4_SIZE 0x14 +#define PCI_FIXED_BAR_5_SIZE 0x1c + +/** + * fixed_bar_cap - return the offset of the fixed BAR cap if found + * @bus: PCI bus + * @devfn: device in question + * + * Look for the fixed BAR cap on @bus and @devfn, returning its offset + * if found or 0 otherwise. + */ +static int fixed_bar_cap(struct pci_bus *bus, unsigned int devfn) +{ + int pos; + u32 pcie_cap = 0, cap_data; + + pos = PCIE_CAP_OFFSET; + + if (!raw_pci_ext_ops) + return 0; + + while (pos) { + if (raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number, + devfn, pos, 4, &pcie_cap)) + return 0; + + if (PCI_EXT_CAP_ID(pcie_cap) == 0x0000 || + PCI_EXT_CAP_ID(pcie_cap) == 0xffff) + break; + + if (PCI_EXT_CAP_ID(pcie_cap) == PCI_EXT_CAP_ID_VNDR) { + raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number, + devfn, pos + 4, 4, &cap_data); + if ((cap_data & 0xffff) == PCIE_VNDR_CAP_ID_FIXED_BAR) + return pos; + } + + pos = PCI_EXT_CAP_NEXT(pcie_cap); + } + + return 0; +} + +static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn, + int reg, int len, u32 val, int offset) +{ + u32 size; + unsigned int domain, busnum; + int bar = (reg - PCI_BASE_ADDRESS_0) >> 2; + + domain = pci_domain_nr(bus); + busnum = bus->number; + + if (val == ~0 && len == 4) { + unsigned long decode; + + raw_pci_ext_ops->read(domain, busnum, devfn, + offset + 8 + (bar * 4), 4, &size); + + /* Turn the size into a decode pattern for the sizing code */ + if (size) { + decode = size - 1; + decode |= decode >> 1; + decode |= decode >> 2; + decode |= decode >> 4; + decode |= decode >> 8; + decode |= decode >> 16; + decode++; + decode = ~(decode - 1); + } else { + decode = 0; + } + + /* + * If val is all ones, the core code is trying to size the reg, + * so update the mmconfig space with the real size. + * + * Note: this assumes the fixed size we got is a power of two. + */ + return raw_pci_ext_ops->write(domain, busnum, devfn, reg, 4, + decode); + } + + /* This is some other kind of BAR write, so just do it. */ + return raw_pci_ext_ops->write(domain, busnum, devfn, reg, len, val); +} + +/** + * type1_access_ok - check whether to use type 1 + * @bus: bus number + * @devfn: device & function in question + * + * If the bus is on a Lincroft chip and it exists, or is not on a Lincroft at + * all, the we can go ahead with any reads & writes. If it's on a Lincroft, + * but doesn't exist, avoid the access altogether to keep the chip from + * hanging. + */ +static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg) +{ + /* This is a workaround for A0 LNC bug where PCI status register does + * not have new CAP bit set. can not be written by SW either. + * + * PCI header type in real LNC indicates a single function device, this + * will prevent probing other devices under the same function in PCI + * shim. Therefore, use the header type in shim instead. + */ + if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE) + return 0; + if (bus == 0 && (devfn == PCI_DEVFN(2, 0) || devfn == PCI_DEVFN(0, 0))) + return 1; + return 0; /* langwell on others */ +} + +static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *value) +{ + if (type1_access_ok(bus->number, devfn, where)) + return pci_direct_conf1.read(pci_domain_nr(bus), bus->number, + devfn, where, size, value); + return raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number, + devfn, where, size, value); +} + +static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 value) +{ + int offset; + + /* On MRST, there is no PCI ROM BAR, this will cause a subsequent read + * to ROM BAR return 0 then being ignored. + */ + if (where == PCI_ROM_ADDRESS) + return 0; + + /* + * Devices with fixed BARs need special handling: + * - BAR sizing code will save, write ~0, read size, restore + * - so writes to fixed BARs need special handling + * - other writes to fixed BAR devices should go through mmconfig + */ + offset = fixed_bar_cap(bus, devfn); + if (offset && + (where >= PCI_BASE_ADDRESS_0 && where <= PCI_BASE_ADDRESS_5)) { + return pci_device_update_fixed(bus, devfn, where, size, value, + offset); + } + + /* + * On Moorestown update both real & mmconfig space + * Note: early Lincroft silicon can't handle type 1 accesses to + * non-existent devices, so just eat the write in that case. + */ + if (type1_access_ok(bus->number, devfn, where)) + return pci_direct_conf1.write(pci_domain_nr(bus), bus->number, + devfn, where, size, value); + return raw_pci_ext_ops->write(pci_domain_nr(bus), bus->number, devfn, + where, size, value); +} + +static int mrst_pci_irq_enable(struct pci_dev *dev) +{ + u8 pin; + struct io_apic_irq_attr irq_attr; + + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + + /* MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to + * IOAPIC RTE entries, so we just enable RTE for the device. + */ + irq_attr.ioapic = mp_find_ioapic(dev->irq); + irq_attr.ioapic_pin = dev->irq; + irq_attr.trigger = 1; /* level */ + irq_attr.polarity = 1; /* active low */ + io_apic_set_pci_routing(&dev->dev, dev->irq, &irq_attr); + + return 0; +} + +struct pci_ops pci_mrst_ops = { + .read = pci_read, + .write = pci_write, +}; + +/** + * pci_mrst_init - installs pci_mrst_ops + * + * Moorestown has an interesting PCI implementation (see above). + * Called when the early platform detection installs it. + */ +int __init pci_mrst_init(void) +{ + printk(KERN_INFO "Moorestown platform detected, using MRST PCI ops\n"); + pci_mmcfg_late_init(); + pcibios_enable_irq = mrst_pci_irq_enable; + pci_root_ops = pci_mrst_ops; + /* Continue with standard init */ + return 1; +} + +/* + * Langwell devices reside at fixed offsets, don't try to move them. + */ +static void __devinit pci_fixed_bar_fixup(struct pci_dev *dev) +{ + unsigned long offset; + u32 size; + int i; + + /* Must have extended configuration space */ + if (dev->cfg_size < PCIE_CAP_OFFSET + 4) + return; + + /* Fixup the BAR sizes for fixed BAR devices and make them unmoveable */ + offset = fixed_bar_cap(dev->bus, dev->devfn); + if (!offset || PCI_DEVFN(2, 0) == dev->devfn || + PCI_DEVFN(2, 2) == dev->devfn) + return; + + for (i = 0; i < PCI_ROM_RESOURCE; i++) { + pci_read_config_dword(dev, offset + 8 + (i * 4), &size); + dev->resource[i].end = dev->resource[i].start + size - 1; + dev->resource[i].flags |= IORESOURCE_PCI_FIXED; + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixed_bar_fixup); diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c index 8eb295e116f..5c9e2458df4 100644 --- a/arch/x86/pci/numaq_32.c +++ b/arch/x86/pci/numaq_32.c @@ -8,9 +8,7 @@ #include <asm/apic.h> #include <asm/mpspec.h> #include <asm/pci_x86.h> - -#define XQUAD_PORTIO_BASE 0xfe400000 -#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */ +#include <asm/numaq.h> #define BUS2QUAD(global) (mp_bus_id_to_node[global]) @@ -18,8 +16,6 @@ #define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local]) -#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port) - #define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \ (0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3)) @@ -41,7 +37,7 @@ static int pci_conf1_mq_read(unsigned int seg, unsigned int bus, if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) return -EINVAL; - spin_lock_irqsave(&pci_config_lock, flags); + raw_spin_lock_irqsave(&pci_config_lock, flags); write_cf8(bus, devfn, reg); @@ -66,7 +62,7 @@ static int pci_conf1_mq_read(unsigned int seg, unsigned int bus, break; } - spin_unlock_irqrestore(&pci_config_lock, flags); + raw_spin_unlock_irqrestore(&pci_config_lock, flags); return 0; } @@ -80,7 +76,7 @@ static int pci_conf1_mq_write(unsigned int seg, unsigned int bus, if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) return -EINVAL; - spin_lock_irqsave(&pci_config_lock, flags); + raw_spin_lock_irqsave(&pci_config_lock, flags); write_cf8(bus, devfn, reg); @@ -105,7 +101,7 @@ static int pci_conf1_mq_write(unsigned int seg, unsigned int bus, break; } - spin_unlock_irqrestore(&pci_config_lock, flags); + raw_spin_unlock_irqrestore(&pci_config_lock, flags); return 0; } @@ -152,14 +148,8 @@ int __init pci_numaq_init(void) { int quad; - if (!found_numaq) - return 0; - raw_pci_ops = &pci_direct_conf1_mq; - if (pcibios_scanned++) - return 0; - pci_root_bus = pcibios_scan_root(0); if (pci_root_bus) pci_bus_add_devices(pci_root_bus); diff --git a/arch/x86/pci/olpc.c b/arch/x86/pci/olpc.c index b889d824f7c..b34815408f5 100644 --- a/arch/x86/pci/olpc.c +++ b/arch/x86/pci/olpc.c @@ -304,9 +304,6 @@ static struct pci_raw_ops pci_olpc_conf = { int __init pci_olpc_init(void) { - if (!machine_is_olpc() || olpc_has_vsa()) - return -ENODEV; - printk(KERN_INFO "PCI: Using configuration type OLPC\n"); raw_pci_ops = &pci_olpc_conf; is_lx = is_geode_lx(); diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c index 1c975cc9839..2492d165096 100644 --- a/arch/x86/pci/pcbios.c +++ b/arch/x86/pci/pcbios.c @@ -4,6 +4,7 @@ #include <linux/pci.h> #include <linux/init.h> +#include <linux/slab.h> #include <linux/module.h> #include <linux/uaccess.h> #include <asm/pci_x86.h> @@ -161,7 +162,7 @@ static int pci_bios_read(unsigned int seg, unsigned int bus, if (!value || (bus > 255) || (devfn > 255) || (reg > 255)) return -EINVAL; - spin_lock_irqsave(&pci_config_lock, flags); + raw_spin_lock_irqsave(&pci_config_lock, flags); switch (len) { case 1: @@ -212,7 +213,7 @@ static int pci_bios_read(unsigned int seg, unsigned int bus, break; } - spin_unlock_irqrestore(&pci_config_lock, flags); + raw_spin_unlock_irqrestore(&pci_config_lock, flags); return (int)((result & 0xff00) >> 8); } @@ -227,7 +228,7 @@ static int pci_bios_write(unsigned int seg, unsigned int bus, if ((bus > 255) || (devfn > 255) || (reg > 255)) return -EINVAL; - spin_lock_irqsave(&pci_config_lock, flags); + raw_spin_lock_irqsave(&pci_config_lock, flags); switch (len) { case 1: @@ -268,7 +269,7 @@ static int pci_bios_write(unsigned int seg, unsigned int bus, break; } - spin_unlock_irqrestore(&pci_config_lock, flags); + raw_spin_unlock_irqrestore(&pci_config_lock, flags); return (int)((result & 0xff00) >> 8); } diff --git a/arch/x86/pci/visws.c b/arch/x86/pci/visws.c index bcead7a4687..03008f72eb0 100644 --- a/arch/x86/pci/visws.c +++ b/arch/x86/pci/visws.c @@ -69,9 +69,6 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq) int __init pci_visws_init(void) { - if (!is_visws_box()) - return -1; - pcibios_enable_irq = &pci_visws_enable_irq; pcibios_disable_irq = &pci_visws_disable_irq; @@ -90,5 +87,6 @@ int __init pci_visws_init(void) pci_scan_bus_with_sysdata(pci_bus1); pci_fixup_irqs(pci_common_swizzle, visws_map_irq); pcibios_resource_survey(); - return 0; + /* Request bus scan */ + return 1; } |