diff options
Diffstat (limited to 'arch/x86/realmode/rm/trampoline_64.S')
-rw-r--r-- | arch/x86/realmode/rm/trampoline_64.S | 153 |
1 files changed, 153 insertions, 0 deletions
diff --git a/arch/x86/realmode/rm/trampoline_64.S b/arch/x86/realmode/rm/trampoline_64.S new file mode 100644 index 00000000000..bb360dc39d2 --- /dev/null +++ b/arch/x86/realmode/rm/trampoline_64.S @@ -0,0 +1,153 @@ +/* + * + * Trampoline.S Derived from Setup.S by Linus Torvalds + * + * 4 Jan 1997 Michael Chastain: changed to gnu as. + * 15 Sept 2005 Eric Biederman: 64bit PIC support + * + * Entry: CS:IP point to the start of our code, we are + * in real mode with no stack, but the rest of the + * trampoline page to make our stack and everything else + * is a mystery. + * + * On entry to trampoline_start, the processor is in real mode + * with 16-bit addressing and 16-bit data. CS has some value + * and IP is zero. Thus, data addresses need to be absolute + * (no relocation) and are taken with regard to r_base. + * + * With the addition of trampoline_level4_pgt this code can + * now enter a 64bit kernel that lives at arbitrary 64bit + * physical addresses. + * + * If you work on this file, check the object module with objdump + * --full-contents --reloc to make sure there are no relocation + * entries. + */ + +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/pgtable_types.h> +#include <asm/page_types.h> +#include <asm/msr.h> +#include <asm/segment.h> +#include <asm/processor-flags.h> +#include "realmode.h" + + .text + .code16 + + .balign PAGE_SIZE +ENTRY(trampoline_start) + cli # We should be safe anyway + wbinvd + + LJMPW_RM(1f) +1: + mov %cs, %ax # Code and data in the same place + mov %ax, %ds + mov %ax, %es + mov %ax, %ss + + movl $0xA5A5A5A5, trampoline_status + # write marker for master knows we're running + + # Setup stack + movl $rm_stack_end, %esp + + call verify_cpu # Verify the cpu supports long mode + testl %eax, %eax # Check for return code + jnz no_longmode + + /* + * GDT tables in non default location kernel can be beyond 16MB and + * lgdt will not be able to load the address as in real mode default + * operand size is 16bit. Use lgdtl instead to force operand size + * to 32 bit. + */ + + lidtl tr_idt # load idt with 0, 0 + lgdtl tr_gdt # load gdt with whatever is appropriate + + movw $__KERNEL_DS, %dx # Data segment descriptor + + # Enable protected mode + movl $X86_CR0_PE, %eax # protected mode (PE) bit + movl %eax, %cr0 # into protected mode + + # flush prefetch and jump to startup_32 + ljmpl $__KERNEL32_CS, $pa_startup_32 + +no_longmode: + hlt + jmp no_longmode +#include "../kernel/verify_cpu.S" + + .section ".text32","ax" + .code32 + .balign 4 +ENTRY(startup_32) + movl %edx, %ss + addl $pa_real_mode_base, %esp + movl %edx, %ds + movl %edx, %es + movl %edx, %fs + movl %edx, %gs + + movl pa_tr_cr4, %eax + movl %eax, %cr4 # Enable PAE mode + + # Setup trampoline 4 level pagetables + movl $pa_trampoline_pgd, %eax + movl %eax, %cr3 + + # Set up EFER + movl pa_tr_efer, %eax + movl pa_tr_efer + 4, %edx + movl $MSR_EFER, %ecx + wrmsr + + # Enable paging and in turn activate Long Mode + movl $(X86_CR0_PG | X86_CR0_WP | X86_CR0_PE), %eax + movl %eax, %cr0 + + /* + * At this point we're in long mode but in 32bit compatibility mode + * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn + * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we use + * the new gdt/idt that has __KERNEL_CS with CS.L = 1. + */ + ljmpl $__KERNEL_CS, $pa_startup_64 + + .section ".text64","ax" + .code64 + .balign 4 +ENTRY(startup_64) + # Now jump into the kernel using virtual addresses + jmpq *tr_start(%rip) + + .section ".rodata","a" + # Duplicate the global descriptor table + # so the kernel can live anywhere + .balign 16 + .globl tr_gdt +tr_gdt: + .short tr_gdt_end - tr_gdt - 1 # gdt limit + .long pa_tr_gdt + .short 0 + .quad 0x00cf9b000000ffff # __KERNEL32_CS + .quad 0x00af9b000000ffff # __KERNEL_CS + .quad 0x00cf93000000ffff # __KERNEL_DS +tr_gdt_end: + + .bss + .balign PAGE_SIZE +GLOBAL(trampoline_pgd) .space PAGE_SIZE + + .balign 8 +GLOBAL(trampoline_header) + tr_start: .space 8 + GLOBAL(tr_efer) .space 8 + GLOBAL(tr_cr4) .space 4 +END(trampoline_header) + +#include "trampoline_common.S" |