diff options
Diffstat (limited to 'arch/x86/um/asm')
| -rw-r--r-- | arch/x86/um/asm/barrier.h | 75 | ||||
| -rw-r--r-- | arch/x86/um/asm/system.h | 135 |
2 files changed, 75 insertions, 135 deletions
diff --git a/arch/x86/um/asm/barrier.h b/arch/x86/um/asm/barrier.h new file mode 100644 index 00000000000..7d01b8c56c0 --- /dev/null +++ b/arch/x86/um/asm/barrier.h @@ -0,0 +1,75 @@ +#ifndef _ASM_UM_BARRIER_H_ +#define _ASM_UM_BARRIER_H_ + +#include <asm/asm.h> +#include <asm/segment.h> +#include <asm/cpufeature.h> +#include <asm/cmpxchg.h> +#include <asm/nops.h> + +#include <linux/kernel.h> +#include <linux/irqflags.h> + +/* + * Force strict CPU ordering. + * And yes, this is required on UP too when we're talking + * to devices. + */ +#ifdef CONFIG_X86_32 + +#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2) +#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2) +#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM) + +#else /* CONFIG_X86_32 */ + +#define mb() asm volatile("mfence" : : : "memory") +#define rmb() asm volatile("lfence" : : : "memory") +#define wmb() asm volatile("sfence" : : : "memory") + +#endif /* CONFIG_X86_32 */ + +#define read_barrier_depends() do { } while (0) + +#ifdef CONFIG_SMP + +#define smp_mb() mb() +#ifdef CONFIG_X86_PPRO_FENCE +#define smp_rmb() rmb() +#else /* CONFIG_X86_PPRO_FENCE */ +#define smp_rmb() barrier() +#endif /* CONFIG_X86_PPRO_FENCE */ + +#ifdef CONFIG_X86_OOSTORE +#define smp_wmb() wmb() +#else /* CONFIG_X86_OOSTORE */ +#define smp_wmb() barrier() +#endif /* CONFIG_X86_OOSTORE */ + +#define smp_read_barrier_depends() read_barrier_depends() +#define set_mb(var, value) do { (void)xchg(&var, value); } while (0) + +#else /* CONFIG_SMP */ + +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while (0) +#define set_mb(var, value) do { var = value; barrier(); } while (0) + +#endif /* CONFIG_SMP */ + +/* + * Stop RDTSC speculation. This is needed when you need to use RDTSC + * (or get_cycles or vread that possibly accesses the TSC) in a defined + * code region. + * + * (Could use an alternative three way for this if there was one.) + */ +static inline void rdtsc_barrier(void) +{ + alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC); + alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC); +} + +#endif diff --git a/arch/x86/um/asm/system.h b/arch/x86/um/asm/system.h deleted file mode 100644 index a459fd9b759..00000000000 --- a/arch/x86/um/asm/system.h +++ /dev/null @@ -1,135 +0,0 @@ -#ifndef _ASM_X86_SYSTEM_H_ -#define _ASM_X86_SYSTEM_H_ - -#include <asm/asm.h> -#include <asm/segment.h> -#include <asm/cpufeature.h> -#include <asm/cmpxchg.h> -#include <asm/nops.h> - -#include <linux/kernel.h> -#include <linux/irqflags.h> - -/* entries in ARCH_DLINFO: */ -#ifdef CONFIG_IA32_EMULATION -# define AT_VECTOR_SIZE_ARCH 2 -#else -# define AT_VECTOR_SIZE_ARCH 1 -#endif - -extern unsigned long arch_align_stack(unsigned long sp); - -void default_idle(void); - -/* - * Force strict CPU ordering. - * And yes, this is required on UP too when we're talking - * to devices. - */ -#ifdef CONFIG_X86_32 -/* - * Some non-Intel clones support out of order store. wmb() ceases to be a - * nop for these. - */ -#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2) -#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2) -#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM) -#else -#define mb() asm volatile("mfence":::"memory") -#define rmb() asm volatile("lfence":::"memory") -#define wmb() asm volatile("sfence" ::: "memory") -#endif - -/** - * read_barrier_depends - Flush all pending reads that subsequents reads - * depend on. - * - * No data-dependent reads from memory-like regions are ever reordered - * over this barrier. All reads preceding this primitive are guaranteed - * to access memory (but not necessarily other CPUs' caches) before any - * reads following this primitive that depend on the data return by - * any of the preceding reads. This primitive is much lighter weight than - * rmb() on most CPUs, and is never heavier weight than is - * rmb(). - * - * These ordering constraints are respected by both the local CPU - * and the compiler. - * - * Ordering is not guaranteed by anything other than these primitives, - * not even by data dependencies. See the documentation for - * memory_barrier() for examples and URLs to more information. - * - * For example, the following code would force ordering (the initial - * value of "a" is zero, "b" is one, and "p" is "&a"): - * - * <programlisting> - * CPU 0 CPU 1 - * - * b = 2; - * memory_barrier(); - * p = &b; q = p; - * read_barrier_depends(); - * d = *q; - * </programlisting> - * - * because the read of "*q" depends on the read of "p" and these - * two reads are separated by a read_barrier_depends(). However, - * the following code, with the same initial values for "a" and "b": - * - * <programlisting> - * CPU 0 CPU 1 - * - * a = 2; - * memory_barrier(); - * b = 3; y = b; - * read_barrier_depends(); - * x = a; - * </programlisting> - * - * does not enforce ordering, since there is no data dependency between - * the read of "a" and the read of "b". Therefore, on some CPUs, such - * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() - * in cases like this where there are no data dependencies. - **/ - -#define read_barrier_depends() do { } while (0) - -#ifdef CONFIG_SMP -#define smp_mb() mb() -#ifdef CONFIG_X86_PPRO_FENCE -# define smp_rmb() rmb() -#else -# define smp_rmb() barrier() -#endif -#ifdef CONFIG_X86_OOSTORE -# define smp_wmb() wmb() -#else -# define smp_wmb() barrier() -#endif -#define smp_read_barrier_depends() read_barrier_depends() -#define set_mb(var, value) do { (void)xchg(&var, value); } while (0) -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while (0) -#define set_mb(var, value) do { var = value; barrier(); } while (0) -#endif - -/* - * Stop RDTSC speculation. This is needed when you need to use RDTSC - * (or get_cycles or vread that possibly accesses the TSC) in a defined - * code region. - * - * (Could use an alternative three way for this if there was one.) - */ -static inline void rdtsc_barrier(void) -{ - alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC); - alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC); -} - -extern void *_switch_to(void *prev, void *next, void *last); -#define switch_to(prev, next, last) prev = _switch_to(prev, next, last) - -#endif |