summaryrefslogtreecommitdiffstats
path: root/arch/x86
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86')
-rw-r--r--arch/x86/Kconfig20
-rw-r--r--arch/x86/include/asm/olpc_ofw.h14
-rw-r--r--arch/x86/include/asm/x86_init.h2
-rw-r--r--arch/x86/kernel/apb_timer.c60
-rw-r--r--arch/x86/kernel/head_32.S2
-rw-r--r--arch/x86/kernel/setup.c2
-rw-r--r--arch/x86/kernel/x86_init.c1
-rw-r--r--arch/x86/pci/ce4100.c2
-rw-r--r--arch/x86/platform/mrst/mrst.c2
-rw-r--r--arch/x86/platform/mrst/vrtc.c16
-rw-r--r--arch/x86/platform/olpc/Makefile4
11 files changed, 27 insertions, 98 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 867a8cf04fa..efbae0c7521 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2066,9 +2066,10 @@ config SCx200HR_TIMER
config OLPC
bool "One Laptop Per Child support"
+ depends on !X86_PAE
select GPIOLIB
- select OLPC_OPENFIRMWARE
- depends on !X86_64 && !X86_PAE
+ select OF
+ select OF_PROMTREE if PROC_DEVICETREE
---help---
Add support for detecting the unique features of the OLPC
XO hardware.
@@ -2079,21 +2080,6 @@ config OLPC_XO1
---help---
Add support for non-essential features of the OLPC XO-1 laptop.
-config OLPC_OPENFIRMWARE
- bool "Support for OLPC's Open Firmware"
- depends on !X86_64 && !X86_PAE
- default n
- select OF
- help
- This option adds support for the implementation of Open Firmware
- that is used on the OLPC XO-1 Children's Machine.
- If unsure, say N here.
-
-config OLPC_OPENFIRMWARE_DT
- bool
- default y if OLPC_OPENFIRMWARE && PROC_DEVICETREE
- select OF_PROMTREE
-
endif # X86_32
config AMD_NB
diff --git a/arch/x86/include/asm/olpc_ofw.h b/arch/x86/include/asm/olpc_ofw.h
index 641988efe06..c5d3a5abbb9 100644
--- a/arch/x86/include/asm/olpc_ofw.h
+++ b/arch/x86/include/asm/olpc_ofw.h
@@ -6,7 +6,7 @@
#define OLPC_OFW_SIG 0x2057464F /* aka "OFW " */
-#ifdef CONFIG_OLPC_OPENFIRMWARE
+#ifdef CONFIG_OLPC
extern bool olpc_ofw_is_installed(void);
@@ -26,19 +26,15 @@ extern void setup_olpc_ofw_pgd(void);
/* check if OFW was detected during boot */
extern bool olpc_ofw_present(void);
-#else /* !CONFIG_OLPC_OPENFIRMWARE */
-
-static inline bool olpc_ofw_is_installed(void) { return false; }
+#else /* !CONFIG_OLPC */
static inline void olpc_ofw_detect(void) { }
static inline void setup_olpc_ofw_pgd(void) { }
-static inline bool olpc_ofw_present(void) { return false; }
-
-#endif /* !CONFIG_OLPC_OPENFIRMWARE */
+#endif /* !CONFIG_OLPC */
-#ifdef CONFIG_OLPC_OPENFIRMWARE_DT
+#ifdef CONFIG_OF_PROMTREE
extern void olpc_dt_build_devicetree(void);
#else
static inline void olpc_dt_build_devicetree(void) { }
-#endif /* CONFIG_OLPC_OPENFIRMWARE_DT */
+#endif
#endif /* _ASM_X86_OLPC_OFW_H */
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 64642ad019f..643ebf2e2ad 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -83,11 +83,13 @@ struct x86_init_paging {
* boot cpu
* @tsc_pre_init: platform function called before TSC init
* @timer_init: initialize the platform timer (default PIT/HPET)
+ * @wallclock_init: init the wallclock device
*/
struct x86_init_timers {
void (*setup_percpu_clockev)(void);
void (*tsc_pre_init)(void);
void (*timer_init)(void);
+ void (*wallclock_init)(void);
};
/**
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index 51ef31a89be..671d5aad7a0 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -508,64 +508,12 @@ static int apbt_next_event(unsigned long delta,
return 0;
}
-/*
- * APB timer clock is not in sync with pclk on Langwell, which translates to
- * unreliable read value caused by sampling error. the error does not add up
- * overtime and only happens when sampling a 0 as a 1 by mistake. so the time
- * would go backwards. the following code is trying to prevent time traveling
- * backwards. little bit paranoid.
- */
static cycle_t apbt_read_clocksource(struct clocksource *cs)
{
- unsigned long t0, t1, t2;
- static unsigned long last_read;
-
-bad_count:
- t1 = apbt_readl(phy_cs_timer_id,
- APBTMR_N_CURRENT_VALUE);
- t2 = apbt_readl(phy_cs_timer_id,
- APBTMR_N_CURRENT_VALUE);
- if (unlikely(t1 < t2)) {
- pr_debug("APBT: read current count error %lx:%lx:%lx\n",
- t1, t2, t2 - t1);
- goto bad_count;
- }
- /*
- * check against cached last read, makes sure time does not go back.
- * it could be a normal rollover but we will do tripple check anyway
- */
- if (unlikely(t2 > last_read)) {
- /* check if we have a normal rollover */
- unsigned long raw_intr_status =
- apbt_readl_reg(APBTMRS_RAW_INT_STATUS);
- /*
- * cs timer interrupt is masked but raw intr bit is set if
- * rollover occurs. then we read EOI reg to clear it.
- */
- if (raw_intr_status & (1 << phy_cs_timer_id)) {
- apbt_readl(phy_cs_timer_id, APBTMR_N_EOI);
- goto out;
- }
- pr_debug("APB CS going back %lx:%lx:%lx ",
- t2, last_read, t2 - last_read);
-bad_count_x3:
- pr_debug("triple check enforced\n");
- t0 = apbt_readl(phy_cs_timer_id,
- APBTMR_N_CURRENT_VALUE);
- udelay(1);
- t1 = apbt_readl(phy_cs_timer_id,
- APBTMR_N_CURRENT_VALUE);
- udelay(1);
- t2 = apbt_readl(phy_cs_timer_id,
- APBTMR_N_CURRENT_VALUE);
- if ((t2 > t1) || (t1 > t0)) {
- printk(KERN_ERR "Error: APB CS tripple check failed\n");
- goto bad_count_x3;
- }
- }
-out:
- last_read = t2;
- return (cycle_t)~t2;
+ unsigned long current_count;
+
+ current_count = apbt_readl(phy_cs_timer_id, APBTMR_N_CURRENT_VALUE);
+ return (cycle_t)~current_count;
}
static int apbt_clocksource_register(void)
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 767d6c43de3..d8cc18a8326 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -137,7 +137,7 @@ ENTRY(startup_32)
movsl
1:
-#ifdef CONFIG_OLPC_OPENFIRMWARE
+#ifdef CONFIG_OLPC
/* save OFW's pgdir table for later use when calling into OFW */
movl %cr3, %eax
movl %eax, pa(olpc_ofw_pgd)
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index d3cfe26c025..ca2f10622a7 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1066,6 +1066,8 @@ void __init setup_arch(char **cmdline_p)
#endif
x86_init.oem.banner();
+ x86_init.timers.wallclock_init();
+
mcheck_init();
local_irq_save(flags);
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index ceb2911aa43..c11514e9128 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -70,6 +70,7 @@ struct x86_init_ops x86_init __initdata = {
.setup_percpu_clockev = setup_boot_APIC_clock,
.tsc_pre_init = x86_init_noop,
.timer_init = hpet_time_init,
+ .wallclock_init = x86_init_noop,
},
.iommu = {
diff --git a/arch/x86/pci/ce4100.c b/arch/x86/pci/ce4100.c
index 85b68ef5e80..c63c6d3dd8e 100644
--- a/arch/x86/pci/ce4100.c
+++ b/arch/x86/pci/ce4100.c
@@ -254,7 +254,7 @@ int bridge_read(unsigned int devfn, int reg, int len, u32 *value)
static int ce4100_conf_read(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 *value)
{
- int i, retval = 1;
+ int i;
if (bus == 1) {
for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) {
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index ea6529e93c6..5c0207bf959 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -31,6 +31,7 @@
#include <asm/apic.h>
#include <asm/io_apic.h>
#include <asm/mrst.h>
+#include <asm/mrst-vrtc.h>
#include <asm/io.h>
#include <asm/i8259.h>
#include <asm/intel_scu_ipc.h>
@@ -268,6 +269,7 @@ void __init x86_mrst_early_setup(void)
x86_platform.calibrate_tsc = mrst_calibrate_tsc;
x86_platform.i8042_detect = mrst_i8042_detect;
+ x86_init.timers.wallclock_init = mrst_rtc_init;
x86_init.pci.init = pci_mrst_init;
x86_init.pci.fixup_irqs = x86_init_noop;
diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c
index 32cd7edd71a..04cf645feb9 100644
--- a/arch/x86/platform/mrst/vrtc.c
+++ b/arch/x86/platform/mrst/vrtc.c
@@ -100,22 +100,14 @@ int vrtc_set_mmss(unsigned long nowtime)
void __init mrst_rtc_init(void)
{
- unsigned long rtc_paddr;
- void __iomem *virt_base;
+ unsigned long vrtc_paddr = sfi_mrtc_array[0].phys_addr;
sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc);
- if (!sfi_mrtc_num)
+ if (!sfi_mrtc_num || !vrtc_paddr)
return;
- rtc_paddr = sfi_mrtc_array[0].phys_addr;
-
- /* vRTC's register address may not be page aligned */
- set_fixmap_nocache(FIX_LNW_VRTC, rtc_paddr);
-
- virt_base = (void __iomem *)__fix_to_virt(FIX_LNW_VRTC);
- virt_base += rtc_paddr & ~PAGE_MASK;
- vrtc_virt_base = virt_base;
-
+ vrtc_virt_base = (void __iomem *)set_fixmap_offset_nocache(FIX_LNW_VRTC,
+ vrtc_paddr);
x86_platform.get_wallclock = vrtc_get_time;
x86_platform.set_wallclock = vrtc_set_mmss;
}
diff --git a/arch/x86/platform/olpc/Makefile b/arch/x86/platform/olpc/Makefile
index e797428b163..c2a8cab65e5 100644
--- a/arch/x86/platform/olpc/Makefile
+++ b/arch/x86/platform/olpc/Makefile
@@ -1,4 +1,4 @@
obj-$(CONFIG_OLPC) += olpc.o
obj-$(CONFIG_OLPC_XO1) += olpc-xo1.o
-obj-$(CONFIG_OLPC_OPENFIRMWARE) += olpc_ofw.o
-obj-$(CONFIG_OLPC_OPENFIRMWARE_DT) += olpc_dt.o
+obj-$(CONFIG_OLPC) += olpc_ofw.o
+obj-$(CONFIG_OF_PROMTREE) += olpc_dt.o
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-07 22:34:44 +0000