1 files changed, 138 insertions, 120 deletions

diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index c80081a6ba4..2a1dcd5f69c 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -55,10 +55,6 @@ int sis_apic_bug; /* not actually supported, dummy for compile */
 
 static int no_timer_check;
 
-static int disable_timer_pin_1 __initdata;
-
-int timer_over_8254 __initdata = 1;
-
 /* Where if anywhere is the i8259 connect in external int mode */
 static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
 
@@ -178,14 +174,20 @@ static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
  * the interrupt, and we need to make sure the entry is fully populated
  * before that happens.
  */
-static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
+static void
+__ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
 {
-	unsigned long flags;
 	union entry_union eu;
 	eu.entry = e;
-	spin_lock_irqsave(&ioapic_lock, flags);
 	io_apic_write(apic, 0x11 + 2*pin, eu.w2);
 	io_apic_write(apic, 0x10 + 2*pin, eu.w1);
+}
+
+static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&ioapic_lock, flags);
+	__ioapic_write_entry(apic, pin, e);
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
@@ -348,29 +350,6 @@ static int __init disable_ioapic_setup(char *str)
 }
 early_param("noapic", disable_ioapic_setup);
 
-/* Actually the next is obsolete, but keep it for paranoid reasons -AK */
-static int __init disable_timer_pin_setup(char *arg)
-{
-	disable_timer_pin_1 = 1;
-	return 1;
-}
-__setup("disable_timer_pin_1", disable_timer_pin_setup);
-
-static int __init setup_disable_8254_timer(char *s)
-{
-	timer_over_8254 = -1;
-	return 1;
-}
-static int __init setup_enable_8254_timer(char *s)
-{
-	timer_over_8254 = 2;
-	return 1;
-}
-
-__setup("disable_8254_timer", setup_disable_8254_timer);
-__setup("enable_8254_timer", setup_enable_8254_timer);
-
-
 /*
  * Find the IRQ entry number of a certain pin.
  */
@@ -750,6 +729,22 @@ static int assign_irq_vector(int irq, cpumask_t mask, cpumask_t *result)
 	return vector;
 }
 
+static void __clear_irq_vector(int irq)
+{
+	cpumask_t mask;
+	int cpu, vector;
+
+	BUG_ON(!irq_vector[irq]);
+
+	vector = irq_vector[irq];
+	cpus_and(mask, irq_domain[irq], cpu_online_map);
+	for_each_cpu_mask(cpu, mask)
+		per_cpu(vector_irq, cpu)[vector] = -1;
+
+	irq_vector[irq] = 0;
+	irq_domain[irq] = CPU_MASK_NONE;
+}
+
 void __setup_vector_irq(int cpu)
 {
 	/* Initialize vector_irq on a new cpu */
@@ -794,27 +789,65 @@ static void ioapic_register_intr(int irq, int vector, unsigned long trigger)
 					      handle_edge_irq, "edge");
 	}
 }
-
-static void __init setup_IO_APIC_irqs(void)
+static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq)
 {
 	struct IO_APIC_route_entry entry;
-	int apic, pin, idx, irq, first_notcon = 1, vector;
+	int vector;
 	unsigned long flags;
 
-	apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
 
-	for (apic = 0; apic < nr_ioapics; apic++) {
-	for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
+	/*
+	 * add it to the IO-APIC irq-routing table:
+	 */
+	memset(&entry,0,sizeof(entry));
 
-		/*
-		 * add it to the IO-APIC irq-routing table:
-		 */
-		memset(&entry,0,sizeof(entry));
+	entry.delivery_mode = INT_DELIVERY_MODE;
+	entry.dest_mode = INT_DEST_MODE;
+	entry.mask = 0;				/* enable IRQ */
+	entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
+
+	entry.trigger = irq_trigger(idx);
+	entry.polarity = irq_polarity(idx);
 
-		entry.delivery_mode = INT_DELIVERY_MODE;
-		entry.dest_mode = INT_DEST_MODE;
-		entry.mask = 0;				/* enable IRQ */
+	if (irq_trigger(idx)) {
+		entry.trigger = 1;
+		entry.mask = 1;
 		entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
+	}
+
+	if (!apic && !IO_APIC_IRQ(irq))
+		return;
+
+	if (IO_APIC_IRQ(irq)) {
+		cpumask_t mask;
+		vector = assign_irq_vector(irq, TARGET_CPUS, &mask);
+		if (vector < 0)
+			return;
+
+		entry.dest.logical.logical_dest = cpu_mask_to_apicid(mask);
+		entry.vector = vector;
+
+		ioapic_register_intr(irq, vector, IOAPIC_AUTO);
+		if (!apic && (irq < 16))
+			disable_8259A_irq(irq);
+	}
+
+	ioapic_write_entry(apic, pin, entry);
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	set_native_irq_info(irq, TARGET_CPUS);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+}
+
+static void __init setup_IO_APIC_irqs(void)
+{
+	int apic, pin, idx, irq, first_notcon = 1;
+
+	apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
+
+	for (apic = 0; apic < nr_ioapics; apic++) {
+	for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
 
 		idx = find_irq_entry(apic,pin,mp_INT);
 		if (idx == -1) {
@@ -826,39 +859,11 @@ static void __init setup_IO_APIC_irqs(void)
 			continue;
 		}
 
-		entry.trigger = irq_trigger(idx);
-		entry.polarity = irq_polarity(idx);
-
-		if (irq_trigger(idx)) {
-			entry.trigger = 1;
-			entry.mask = 1;
-			entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
-		}
-
 		irq = pin_2_irq(idx, apic, pin);
 		add_pin_to_irq(irq, apic, pin);
 
-		if (!apic && !IO_APIC_IRQ(irq))
-			continue;
-
-		if (IO_APIC_IRQ(irq)) {
-			cpumask_t mask;
-			vector = assign_irq_vector(irq, TARGET_CPUS, &mask);
-			if (vector < 0)
-				continue;
-
-			entry.dest.logical.logical_dest = cpu_mask_to_apicid(mask);
-			entry.vector = vector;
-
-			ioapic_register_intr(irq, vector, IOAPIC_AUTO);
-			if (!apic && (irq < 16))
-				disable_8259A_irq(irq);
-		}
-		ioapic_write_entry(apic, pin, entry);
+		setup_IO_APIC_irq(apic, pin, idx, irq);
 
-		spin_lock_irqsave(&ioapic_lock, flags);
-		set_native_irq_info(irq, TARGET_CPUS);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
 	}
 	}
 
@@ -1563,10 +1568,33 @@ static inline void unlock_ExtINT_logic(void)
  * a wide range of boards and BIOS bugs.  Fortunately only the timer IRQ
  * is so screwy.  Thanks to Brian Perkins for testing/hacking this beast
  * fanatically on his truly buggy board.
- *
- * FIXME: really need to revamp this for modern platforms only.
  */
-static inline void check_timer(void)
+
+static int try_apic_pin(int apic, int pin, char *msg)
+{
+	apic_printk(APIC_VERBOSE, KERN_INFO
+		    "..TIMER: trying IO-APIC=%d PIN=%d %s",
+		    apic, pin, msg);
+
+	/*
+	 * Ok, does IRQ0 through the IOAPIC work?
+	 */
+	if (!no_timer_check && timer_irq_works()) {
+		nmi_watchdog_default();
+		if (nmi_watchdog == NMI_IO_APIC) {
+			disable_8259A_irq(0);
+			setup_nmi();
+			enable_8259A_irq(0);
+		}
+		return 1;
+	}
+	clear_IO_APIC_pin(apic, pin);
+	apic_printk(APIC_QUIET, KERN_ERR " .. failed\n");
+	return 0;
+}
+
+/* The function from hell */
+static void check_timer(void)
 {
 	int apic1, pin1, apic2, pin2;
 	int vector;
@@ -1587,61 +1615,43 @@ static inline void check_timer(void)
 	 */
 	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
 	init_8259A(1);
-	if (timer_over_8254 > 0)
-		enable_8259A_irq(0);
 
 	pin1  = find_isa_irq_pin(0, mp_INT);
 	apic1 = find_isa_irq_apic(0, mp_INT);
 	pin2  = ioapic_i8259.pin;
 	apic2 = ioapic_i8259.apic;
 
-	apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
-		vector, apic1, pin1, apic2, pin2);
+	/* Do this first, otherwise we get double interrupts on ATI boards */
+	if ((pin1 != -1) && try_apic_pin(apic1, pin1,"with 8259 IRQ0 disabled"))
+		return;
 
-	if (pin1 != -1) {
-		/*
-		 * Ok, does IRQ0 through the IOAPIC work?
-		 */
-		unmask_IO_APIC_irq(0);
-		if (!no_timer_check && timer_irq_works()) {
-			nmi_watchdog_default();
-			if (nmi_watchdog == NMI_IO_APIC) {
-				disable_8259A_irq(0);
-				setup_nmi();
-				enable_8259A_irq(0);
-			}
-			if (disable_timer_pin_1 > 0)
-				clear_IO_APIC_pin(0, pin1);
-			return;
-		}
-		clear_IO_APIC_pin(apic1, pin1);
-		apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not "
-				"connected to IO-APIC\n");
-	}
+	/* Now try again with IRQ0 8259A enabled.
+	   Assumes timer is on IO-APIC 0 ?!? */
+	enable_8259A_irq(0);
+	unmask_IO_APIC_irq(0);
+	if (try_apic_pin(apic1, pin1, "with 8259 IRQ0 enabled"))
+		return;
+	disable_8259A_irq(0);
+
+	/* Always try pin0 and pin2 on APIC 0 to handle buggy timer overrides
+	   on Nvidia boards */
+	if (!(apic1 == 0 && pin1 == 0) &&
+	    try_apic_pin(0, 0, "fallback with 8259 IRQ0 disabled"))
+		return;
+	if (!(apic1 == 0 && pin1 == 2) &&
+	    try_apic_pin(0, 2, "fallback with 8259 IRQ0 disabled"))
+		return;
 
-	apic_printk(APIC_VERBOSE,KERN_INFO "...trying to set up timer (IRQ0) "
-				"through the 8259A ... ");
+	/* Then try pure 8259A routing on the 8259 as reported by BIOS*/
+	enable_8259A_irq(0);
 	if (pin2 != -1) {
-		apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...",
-			apic2, pin2);
-		/*
-		 * legacy devices should be connected to IO APIC #0
-		 */
 		setup_ExtINT_IRQ0_pin(apic2, pin2, vector);
-		if (timer_irq_works()) {
-			apic_printk(APIC_VERBOSE," works.\n");
-			nmi_watchdog_default();
-			if (nmi_watchdog == NMI_IO_APIC) {
-				setup_nmi();
-			}
+		if (try_apic_pin(apic2,pin2,"8259A broadcast ExtINT from BIOS"))
 			return;
-		}
-		/*
-		 * Cleanup, just in case ...
-		 */
-		clear_IO_APIC_pin(apic2, pin2);
 	}
-	apic_printk(APIC_VERBOSE," failed.\n");
+
+	/* Tried all possibilities to go through the IO-APIC. Now come the
+	   really cheesy fallbacks. */
 
 	if (nmi_watchdog == NMI_IO_APIC) {
 		printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
@@ -1837,7 +1847,7 @@ void destroy_irq(unsigned int irq)
 	dynamic_irq_cleanup(irq);
 
 	spin_lock_irqsave(&vector_lock, flags);
-	irq_vector[irq] = 0;
+	__clear_irq_vector(irq);
 	spin_unlock_irqrestore(&vector_lock, flags);
 }
 
@@ -2139,7 +2149,15 @@ void __init setup_ioapic_dest(void)
 			if (irq_entry == -1)
 				continue;
 			irq = pin_2_irq(irq_entry, ioapic, pin);
-			set_ioapic_affinity_irq(irq, TARGET_CPUS);
+
+			/* setup_IO_APIC_irqs could fail to get vector for some device
+			 * when you have too many devices, because at that time only boot
+			 * cpu is online.
+			 */
+			if(!irq_vector[irq])
+				setup_IO_APIC_irq(ioapic, pin, irq_entry, irq);
+			else
+				set_ioapic_affinity_irq(irq, TARGET_CPUS);
 		}
 
 	}