diff options
Diffstat (limited to 'arch')
100 files changed, 5337 insertions, 3542 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index bf07b6f50fa..5d285811993 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -251,7 +251,7 @@ config X86_ELAN config X86_VOYAGER bool "Voyager (NCR)" - depends on X86_32 && (SMP || BROKEN) + depends on X86_32 && (SMP || BROKEN) && !PCI help Voyager is an MCA-based 32-way capable SMP architecture proprietary to NCR Corp. Machine classes 345x/35xx/4100/51xx are Voyager-based. @@ -263,7 +263,7 @@ config X86_VOYAGER config X86_NUMAQ bool "NUMAQ (IBM/Sequent)" - depends on SMP && X86_32 + depends on SMP && X86_32 && PCI select NUMA help This option is used for getting Linux to run on a (IBM/Sequent) NUMA @@ -293,7 +293,7 @@ config X86_BIGSMP config X86_VISWS bool "SGI 320/540 (Visual Workstation)" - depends on X86_32 + depends on X86_32 && !PCI help The SGI Visual Workstation series is an IA32-based workstation based on SGI systems chips with some legacy PC hardware attached. @@ -337,7 +337,7 @@ config X86_RDC321X config X86_VSMP bool "Support for ScaleMP vSMP" select PARAVIRT - depends on X86_64 + depends on X86_64 && !PCI help Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is supposed to run on these EM64T-based machines. Only choose this option @@ -417,35 +417,19 @@ config PARAVIRT_CLOCK endif -config MEMTEST_BOOTPARAM - bool "Memtest boot parameter" +config MEMTEST + bool "Memtest" depends on X86_64 default y help This option adds a kernel parameter 'memtest', which allows memtest - to be disabled at boot. If this option is selected, memtest - functionality can be disabled with memtest=0 on the kernel - command line. The purpose of this option is to allow a single - kernel image to be distributed with memtest built in, but not - necessarily enabled. - + to be set. + memtest=0, mean disabled; -- default + memtest=1, mean do 1 test pattern; + ... + memtest=4, mean do 4 test patterns. If you are unsure how to answer this question, answer Y. -config MEMTEST_BOOTPARAM_VALUE - int "Memtest boot parameter default value (0-4)" - depends on MEMTEST_BOOTPARAM - range 0 4 - default 0 - help - This option sets the default value for the kernel parameter - 'memtest', which allows memtest to be disabled at boot. If this - option is set to 0 (zero), the memtest kernel parameter will - default to 0, disabling memtest at bootup. If this option is - set to 4, the memtest kernel parameter will default to 4, - enabling memtest at bootup, and use that as pattern number. - - If you are unsure how to answer this question, answer 0. - config ACPI_SRAT def_bool y depends on X86_32 && ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH) @@ -563,18 +547,18 @@ config IOMMU_HELPER def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB) config NR_CPUS - int "Maximum number of CPUs (2-255)" - range 2 255 + int "Maximum number of CPUs (2-4096)" + range 2 4096 depends on SMP default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000 default "8" help This allows you to specify the maximum number of CPUs which this - kernel will support. The maximum supported value is 255 and the + kernel will support. The maximum supported value is 4096 and the minimum value which makes sense is 2. This is purely to save memory - each supported CPU adds - approximately eight kilobytes to the kernel image. + approximately one kilobyte to the kernel image. config SCHED_SMT bool "SMT (Hyperthreading) scheduler support" @@ -1475,8 +1459,7 @@ endmenu menu "Bus options (PCI etc.)" config PCI - bool "PCI support" if !X86_VISWS && !X86_VSMP - depends on !X86_VOYAGER + bool "PCI support" default y select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC) help diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index 2ad6301849a..3d22bb8175b 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -399,6 +399,10 @@ config X86_TSC def_bool y depends on ((MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64 +config X86_CMPXCHG64 + def_bool y + depends on X86_PAE || X86_64 + # this should be set for all -march=.. options where the compiler # generates cmov. config X86_CMOV diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 3cff3c894cf..5df0d1e330b 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -210,12 +210,12 @@ all: bzImage # KBUILD_IMAGE specify target image being built KBUILD_IMAGE := $(boot)/bzImage -zImage zlilo zdisk: KBUILD_IMAGE := arch/x86/boot/zImage +zImage zlilo zdisk: KBUILD_IMAGE := $(boot)/zImage zImage bzImage: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE) $(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot - $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/bzImage + $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/$@ compressed: zImage diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index d8819efac81..1d5dff4123e 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -30,6 +30,7 @@ #include <asm/page.h> #include <asm/boot.h> #include <asm/msr.h> +#include <asm/processor-flags.h> #include <asm/asm-offsets.h> .section ".text.head" @@ -109,7 +110,7 @@ startup_32: /* Enable PAE mode */ xorl %eax, %eax - orl $(1 << 5), %eax + orl $(X86_CR4_PAE), %eax movl %eax, %cr4 /* @@ -170,7 +171,7 @@ startup_32: pushl %eax /* Enter paged protected Mode, activating Long Mode */ - movl $0x80000001, %eax /* Enable Paging and Protected mode */ + movl $(X86_CR0_PG | X86_CR0_PE), %eax /* Enable Paging and Protected mode */ movl %eax, %cr0 /* Jump from 32bit compatibility mode into 64bit mode. */ diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c index 40ecb8d7688..b939cb476de 100644 --- a/arch/x86/boot/video-vga.c +++ b/arch/x86/boot/video-vga.c @@ -259,8 +259,7 @@ static int vga_probe(void) return mode_count[adapter]; } -__videocard video_vga = -{ +__videocard video_vga = { .card_name = "VGA", .probe = vga_probe, .set_mode = vga_set_mode, diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index ad7ddaaff58..9bc34e2033e 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -1,54 +1,103 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-git14 -# Fri Jul 20 09:53:15 2007 +# Linux kernel version: 2.6.26-rc1 +# Sun May 4 19:59:02 2008 # +# CONFIG_64BIT is not set CONFIG_X86_32=y +# CONFIG_X86_64 is not set +CONFIG_X86=y +CONFIG_DEFCONFIG_LIST="arch/x86/configs/i386_defconfig" +# CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y -CONFIG_SEMAPHORE_SLEEPERS=y -CONFIG_X86=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y -CONFIG_QUICKLIST=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y +# CONFIG_GENERIC_GPIO is not set CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_DMI=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +# CONFIG_RWSEM_GENERIC_SPINLOCK is not set +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME_VSYSCALL is not set +CONFIG_ARCH_HAS_CPU_RELAX=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_ZONE_DMA32 is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +# CONFIG_AUDIT_ARCH is not set +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_X86_SMP=y +CONFIG_X86_32_SMP=y +CONFIG_X86_HT=y +CONFIG_X86_BIOS_REBOOT=y +CONFIG_X86_TRAMPOLINE=y +CONFIG_KTIME_SCALAR=y # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=18 -# CONFIG_CPUSETS is not set -CONFIG_SYSFS_DEPRECATED=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_TREE=y +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_CGROUP_NS=y +# CONFIG_CGROUP_DEVICE is not set +CONFIG_CPUSETS=y +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +# CONFIG_USER_SCHED is not set +CONFIG_CGROUP_SCHED=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +# CONFIG_CGROUP_MEM_RES_CTLR is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_PROC_PID_CPUSET=y CONFIG_RELAY=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -56,13 +105,15 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -76,6 +127,17 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_MARKERS=y +# CONFIG_OPROFILE is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -87,10 +149,10 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_KMOD is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LBD is not set +CONFIG_BLK_DEV_IO_TRACE=y # CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set +CONFIG_BLK_DEV_BSG=y # # IO Schedulers @@ -103,7 +165,8 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # # Processor type and features @@ -111,18 +174,21 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y -# CONFIG_X86_PC is not set +CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set -CONFIG_X86_GENERICARCH=y +# CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set -# CONFIG_PARAVIRT is not set -CONFIG_X86_CYCLONE_TIMER=y +# CONFIG_X86_RDC321X is not set +# CONFIG_X86_VSMP is not set +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_PARAVIRT_GUEST is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set @@ -130,9 +196,8 @@ CONFIG_X86_CYCLONE_TIMER=y # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set -CONFIG_MPENTIUMIII=y +# CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set -# CONFIG_MCORE2 is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set @@ -147,14 +212,14 @@ CONFIG_MPENTIUMIII=y # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set -CONFIG_X86_GENERIC=y +# CONFIG_MPSC is not set +CONFIG_MCORE2=y +# CONFIG_GENERIC_CPU is not set +# CONFIG_X86_GENERIC is not set +CONFIG_X86_CPU=y CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_XADD=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y @@ -162,106 +227,120 @@ CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y +CONFIG_X86_P6_NOP=y CONFIG_X86_TSC=y -CONFIG_X86_CMOV=y -CONFIG_X86_MINIMUM_CPU_FAMILY=4 +CONFIG_X86_MINIMUM_CPU_FAMILY=6 +CONFIG_X86_DEBUGCTLMSR=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y -CONFIG_NR_CPUS=32 -CONFIG_SCHED_SMT=y +CONFIG_DMI=y +# CONFIG_IOMMU_HELPER is not set +CONFIG_NR_CPUS=4 +# CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y -CONFIG_X86_MCE=y -CONFIG_X86_MCE_NONFATAL=y -CONFIG_X86_MCE_P4THERMAL=y +# CONFIG_X86_MCE is not set CONFIG_VM86=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_X86_REBOOTFIXUPS is not set -CONFIG_MICROCODE=y -CONFIG_MICROCODE_OLD_INTERFACE=y +# CONFIG_MICROCODE is not set CONFIG_X86_MSR=y CONFIG_X86_CPUID=y - -# -# Firmware Drivers -# -# CONFIG_EDD is not set -# CONFIG_DELL_RBU is not set -# CONFIG_DCDBAS is not set -CONFIG_DMIID=y # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_HIGHMEM=y -CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_NEED_NODE_MEMMAP_SIZE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y +# CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set + +# +# Memory hotplug is currently incompatible with Software Suspend +# +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y -CONFIG_NR_QUICK=1 CONFIG_VIRT_TO_BUS=y # CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y -# CONFIG_EFI is not set +# CONFIG_X86_PAT is not set +CONFIG_EFI=y # CONFIG_IRQBALANCE is not set CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set -CONFIG_HZ_250=y +# CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set -CONFIG_PHYSICAL_START=0x100000 -# CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_ALIGN=0x100000 -# CONFIG_HOTPLUG_CPU is not set -CONFIG_COMPAT_VDSO=y +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +CONFIG_SCHED_HRTICK=y +CONFIG_KEXEC=y +CONFIG_CRASH_DUMP=y +CONFIG_PHYSICAL_START=0x1000000 +CONFIG_RELOCATABLE=y +CONFIG_PHYSICAL_ALIGN=0x200000 +CONFIG_HOTPLUG_CPU=y +# CONFIG_COMPAT_VDSO is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # -# Power management options (ACPI, APM) +# Power management options # CONFIG_PM=y -CONFIG_PM_LEGACY=y -# CONFIG_PM_DEBUG is not set - -# -# ACPI (Advanced Configuration and Power Interface) Support -# +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_TRACE=y +CONFIG_PM_TRACE_RTC=y +CONFIG_PM_SLEEP_SMP=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="" CONFIG_ACPI=y +CONFIG_ACPI_SLEEP=y CONFIG_ACPI_PROCFS=y +CONFIG_ACPI_PROCFS_POWER=y +CONFIG_ACPI_SYSFS_POWER=y +CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y -# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_DOCK=y +# CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=y +CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y +# CONFIG_ACPI_WMI is not set # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set -CONFIG_ACPI_BLACKLIST_YEAR=2001 -CONFIG_ACPI_DEBUG=y +# CONFIG_ACPI_CUSTOM_DSDT is not set +CONFIG_ACPI_BLACKLIST_YEAR=0 +# CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y -# CONFIG_ACPI_CONTAINER is not set +CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set # CONFIG_APM is not set @@ -271,15 +350,17 @@ CONFIG_X86_PM_TIMER=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_STAT is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # CPUFreq processor drivers @@ -287,8 +368,7 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y CONFIG_X86_ACPI_CPUFREQ=y # CONFIG_X86_POWERNOW_K6 is not set # CONFIG_X86_POWERNOW_K7 is not set -CONFIG_X86_POWERNOW_K8=y -CONFIG_X86_POWERNOW_K8_ACPI=y +# CONFIG_X86_POWERNOW_K8 is not set # CONFIG_X86_GX_SUSPMOD is not set # CONFIG_X86_SPEEDSTEP_CENTRINO is not set # CONFIG_X86_SPEEDSTEP_ICH is not set @@ -302,43 +382,72 @@ CONFIG_X86_POWERNOW_K8_ACPI=y # # shared options # -CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y +# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y # -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# Bus options (PCI etc.) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y +# CONFIG_PCI_GOOLPC is not set CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y -# CONFIG_PCIEPORTBUS is not set +CONFIG_PCI_DOMAINS=y +CONFIG_PCIEPORTBUS=y +# CONFIG_HOTPLUG_PCI_PCIE is not set +CONFIG_PCIEAER=y +# CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set -# CONFIG_HT_IRQ is not set +CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y # CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set +# CONFIG_OLPC is not set CONFIG_K8_NB=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=y +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCCARD_NONSTATIC=y +CONFIG_HOTPLUG_PCI=y +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_IBM is not set +# CONFIG_HOTPLUG_PCI_ACPI is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set + +# +# Executable file formats / Emulations # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_MISC=y # # Networking @@ -349,59 +458,142 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set +CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set +CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +# CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set +CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_INET_LRO=y +# CONFIG_INET_DIAG is not set +CONFIG_TCP_CONG_ADVANCED=y +# CONFIG_TCP_CONG_BIC is not set CONFIG_TCP_CONG_CUBIC=y +# CONFIG_TCP_CONG_WESTWOOD is not set +# CONFIG_TCP_CONG_HTCP is not set +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_VENO is not set +# CONFIG_TCP_CONG_YEAH is not set +# CONFIG_TCP_CONG_ILLINOIS is not set +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set +CONFIG_TCP_MD5SIG=y +# CONFIG_IP_VS is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set +CONFIG_INET6_AH=y +CONFIG_INET6_ESP=y # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y -# CONFIG_INET6_XFRM_MODE_BEET is not set +CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set +# CONFIG_IPV6_MROUTE is not set +CONFIG_NETLABEL=y +CONFIG_NETWORK_SECMARK=y +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_ADVANCED is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK_LOG=y +CONFIG_NF_CONNTRACK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_FTP=y +CONFIG_NF_CONNTRACK_IRC=y +CONFIG_NF_CONNTRACK_SIP=y +CONFIG_NF_CT_NETLINK=y +CONFIG_NETFILTER_XTABLES=y +CONFIG_NETFILTER_XT_TARGET_MARK=y +CONFIG_NETFILTER_XT_TARGET_NFLOG=y +CONFIG_NETFILTER_XT_TARGET_SECMARK=y +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y +CONFIG_NETFILTER_XT_TARGET_TCPMSS=y +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y +CONFIG_NETFILTER_XT_MATCH_MARK=y +CONFIG_NETFILTER_XT_MATCH_POLICY=y +CONFIG_NETFILTER_XT_MATCH_STATE=y + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=y +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +CONFIG_IP_NF_TARGET_LOG=y +CONFIG_IP_NF_TARGET_ULOG=y +CONFIG_NF_NAT=y +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=y +CONFIG_NF_NAT_FTP=y +CONFIG_NF_NAT_IRC=y +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set +CONFIG_NF_NAT_SIP=y +CONFIG_IP_NF_MANGLE=y + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=y +CONFIG_IP6_NF_IPTABLES=y +CONFIG_IP6_NF_MATCH_IPV6HEADER=y +CONFIG_IP6_NF_FILTER=y +CONFIG_IP6_NF_TARGET_LOG=y +CONFIG_IP6_NF_TARGET_REJECT=y +CONFIG_IP6_NF_MANGLE=y # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set @@ -409,6 +601,7 @@ CONFIG_IPV6_SIT=y # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set +CONFIG_LLC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set @@ -416,28 +609,99 @@ CONFIG_IPV6_SIT=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_RR is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_INGRESS is not set + +# +# Classification +# +CONFIG_NET_CLS=y +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +# CONFIG_NET_EMATCH_CMP is not set +# CONFIG_NET_EMATCH_NBYTE is not set +# CONFIG_NET_EMATCH_U32 is not set +# CONFIG_NET_EMATCH_META is not set +# CONFIG_NET_EMATCH_TEXT is not set +CONFIG_NET_CLS_ACT=y +# CONFIG_NET_ACT_POLICE is not set +# CONFIG_NET_ACT_GACT is not set +# CONFIG_NET_ACT_MIRRED is not set +# CONFIG_NET_ACT_IPT is not set +# CONFIG_NET_ACT_NAT is not set +# CONFIG_NET_ACT_PEDIT is not set +# CONFIG_NET_ACT_SIMP is not set +CONFIG_NET_SCH_FIFO=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set -# CONFIG_HAMRADIO is not set +CONFIG_HAMRADIO=y + +# +# Packet Radio protocols +# +# CONFIG_AX25 is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y # # Wireless # -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set +CONFIG_CFG80211=y +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_NONE is not set + +# +# Selecting 'y' for an algorithm will +# + +# +# build the algorithm into mac80211. +# +CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set +# CONFIG_MAC80211_DEBUG is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -449,13 +713,15 @@ CONFIG_IPV6_SIT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set +CONFIG_DEBUG_DEVRES=y # CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y @@ -466,7 +732,7 @@ CONFIG_PNP=y # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_FD=y +# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -479,8 +745,8 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -489,73 +755,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ACER_WMI is not set +# CONFIG_ASUS_LAPTOP is not set +# CONFIG_FUJITSU_LAPTOP is not set +# CONFIG_TC1100_WMI is not set +# CONFIG_MSI_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_HD_IDE is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -CONFIG_BLK_DEV_IDEACPI=y -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_CMD640 is not set -# CONFIG_BLK_DEV_IDEPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -CONFIG_IDEPCI_PCIBUS_ORDER=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_RZ1000 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_BLK_DEV_ATIIXP is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_CS5535 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_SC1200 is not set -CONFIG_BLK_DEV_PIIX=y -# CONFIG_BLK_DEV_IT8213 is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SIS5513 is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_BLK_DEV_HD is not set +# CONFIG_INTEL_MENLOW is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support @@ -564,8 +774,8 @@ CONFIG_BLK_DEV_IDEDMA=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set -CONFIG_SCSI_NETLINK=y -# CONFIG_SCSI_PROC_FS is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) @@ -574,7 +784,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set @@ -582,7 +792,7 @@ CONFIG_CHR_DEV_SG=y # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set +CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m @@ -591,81 +801,37 @@ CONFIG_SCSI_WAIT_SCAN=m # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -CONFIG_BLK_DEV_3W_XXXX_RAID=y -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -CONFIG_SCSI_AIC7XXX=y -CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 -CONFIG_AIC7XXX_RESET_DELAY_MS=5000 -CONFIG_AIC7XXX_DEBUG_ENABLE=y -CONFIG_AIC7XXX_DEBUG_MASK=0 -CONFIG_AIC7XXX_REG_PRETTY_PRINT=y -# CONFIG_SCSI_AIC7XXX_OLD is not set -CONFIG_SCSI_AIC79XX=y -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=4000 -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y -CONFIG_SATA_SVW=y +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set CONFIG_ATA_PIIX=y # CONFIG_SATA_MV is not set -CONFIG_SATA_NV=y +# CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set -CONFIG_SATA_SIL=y -# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIL is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set -CONFIG_SATA_VIA=y +# CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ACPI is not set # CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set +CONFIG_PATA_AMD=y # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set @@ -673,6 +839,7 @@ CONFIG_SATA_VIA=y # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CS5535 is not set +# CONFIG_PATA_CS5536 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_ATA_GENERIC is not set @@ -686,11 +853,14 @@ CONFIG_SATA_VIA=y # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set +CONFIG_PATA_OLDPIIX=y # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set @@ -702,65 +872,42 @@ CONFIG_SATA_VIA=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_MD=y +# CONFIG_MD_LINEAR is not set +# CONFIG_MD_RAID0 is not set +# CONFIG_MD_RAID1 is not set +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y # CONFIG_DM_DEBUG is not set # CONFIG_DM_CRYPT is not set # CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set +CONFIG_DM_MIRROR=y +CONFIG_DM_ZERO=y # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=y -CONFIG_FUSION_SPI=y -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set -CONFIG_FUSION_MAX_SGE=128 -# CONFIG_FUSION_CTL is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set -CONFIG_IEEE1394=y - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# Controllers -# - -# -# Texas Instruments PCILynx requires I2C -# -CONFIG_IEEE1394_OHCI1394=y - -# -# Protocols -# -# CONFIG_IEEE1394_VIDEO1394 is not set -# CONFIG_IEEE1394_SBP2 is not set -# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set -# CONFIG_IEEE1394_ETH1394 is not set -# CONFIG_IEEE1394_DV1394 is not set -CONFIG_IEEE1394_RAWIO=y +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_MACINTOSH_DRIVERS=y -# CONFIG_MAC_EMUMOUSEBTN is not set +CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y -CONFIG_NETDEVICES_MULTIQUEUE=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_IFB is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set @@ -770,38 +917,40 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y -CONFIG_VORTEX=y +# CONFIG_VORTEX is not set # CONFIG_TYPHOON is not set CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set -CONFIG_TULIP=y -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -# CONFIG_TULIP_NAPI is not set +# CONFIG_TULIP is not set # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set +# CONFIG_PCMCIA_XIRCOM is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set -CONFIG_B44=y +# CONFIG_B44 is not set CONFIG_FORCEDETH=y # CONFIG_FORCEDETH_NAPI is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set -CONFIG_8139CP=y +# CONFIG_8139CP is not set CONFIG_8139TOO=y -# CONFIG_8139TOO_PIO is not set +CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -814,34 +963,75 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set -CONFIG_R8169=y -# CONFIG_R8169_NAPI is not set +# CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set CONFIG_SKY2=y +# CONFIG_SKY2_DEBUG is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y -CONFIG_BNX2=y +# CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set -# CONFIG_TR is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set +CONFIG_TR=y +# CONFIG_IBMOL is not set +# CONFIG_IBMLS is not set +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_LIBERTAS is not set +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_ADM8211 is not set +# CONFIG_P54_COMMON is not set +CONFIG_ATH5K=y +# CONFIG_ATH5K_DEBUG is not set +# CONFIG_IWLWIFI is not set +# CONFIG_IWLCORE is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set # # USB Network Adapters @@ -850,16 +1040,27 @@ CONFIG_NETDEV_10000=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +# CONFIG_PCMCIA_PCNET is not set +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set +# CONFIG_PCMCIA_IBMTR is not set # CONFIG_WAN is not set -# CONFIG_FDDI is not set +CONFIG_FDDI=y +# CONFIG_DEFXX is not set +# CONFIG_SKFP is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y @@ -870,18 +1071,17 @@ CONFIG_NET_POLL_CONTROLLER=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_POLLDEV=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -906,17 +1106,63 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_ANALOG is not set +# CONFIG_JOYSTICK_A3D is not set +# CONFIG_JOYSTICK_ADI is not set +# CONFIG_JOYSTICK_COBRA is not set +# CONFIG_JOYSTICK_GF2K is not set +# CONFIG_JOYSTICK_GRIP is not set +# CONFIG_JOYSTICK_GRIP_MP is not set +# CONFIG_JOYSTICK_GUILLEMOT is not set +# CONFIG_JOYSTICK_INTERACT is not set +# CONFIG_JOYSTICK_SIDEWINDER is not set +# CONFIG_JOYSTICK_TMDC is not set +# CONFIG_JOYSTICK_IFORCE is not set +# CONFIG_JOYSTICK_WARRIOR is not set +# CONFIG_JOYSTICK_MAGELLAN is not set +# CONFIG_JOYSTICK_SPACEORB is not set +# CONFIG_JOYSTICK_SPACEBALL is not set +# CONFIG_JOYSTICK_STINGER is not set +# CONFIG_JOYSTICK_TWIDJOY is not set +# CONFIG_JOYSTICK_ZHENHUA is not set +# CONFIG_JOYSTICK_JOYDUMP is not set +# CONFIG_JOYSTICK_XPAD is not set +CONFIG_INPUT_TABLET=y +# CONFIG_TABLET_USB_ACECAD is not set +# CONFIG_TABLET_USB_AIPTEK is not set +# CONFIG_TABLET_USB_GTCO is not set +# CONFIG_TABLET_USB_KBTAB is not set +# CONFIG_TABLET_USB_WACOM is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_PCSPKR is not set +# CONFIG_INPUT_APANEL is not set +# CONFIG_INPUT_WISTRON_BTNS is not set +# CONFIG_INPUT_ATLAS_BTNS is not set +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_UINPUT is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y @@ -929,8 +1175,26 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINK is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_RIO is not set +# CONFIG_STALDRV is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -940,9 +1204,14 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y -CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support @@ -951,89 +1220,275 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_INTEL=y -CONFIG_HW_RANDOM_AMD=y +# CONFIG_HW_RANDOM_INTEL is not set +# CONFIG_HW_RANDOM_AMD is not set CONFIG_HW_RANDOM_GEODE=y CONFIG_HW_RANDOM_VIA=y -# CONFIG_NVRAM is not set -CONFIG_RTC=y +CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set -CONFIG_AGP=y -# CONFIG_AGP_ALI is not set -# CONFIG_AGP_ATI is not set -# CONFIG_AGP_AMD is not set -CONFIG_AGP_AMD64=y -CONFIG_AGP_INTEL=y -# CONFIG_AGP_NVIDIA is not set -# CONFIG_AGP_SIS is not set -# CONFIG_AGP_SWORKS is not set -# CONFIG_AGP_VIA is not set -# CONFIG_AGP_EFFICEON is not set -# CONFIG_DRM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_NSC_GPIO is not set # CONFIG_CS5535_GPIO is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=256 +# CONFIG_RAW_DRIVER is not set CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set -CONFIG_HPET_MMAP=y +# CONFIG_HPET_MMAP is not set # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set - -# -# SPI support -# +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +CONFIG_I2C_I801=y +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set # CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +# CONFIG_ALIM1535_WDT is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_SC520_WDT is not set +# CONFIG_EUROTECH_WDT is not set +# CONFIG_IB700_WDT is not set +# CONFIG_IBMASR is not set +# CONFIG_WAFER_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_ITCO_WDT is not set +# CONFIG_IT8712F_WDT is not set +# CONFIG_HP_WATCHDOG is not set +# CONFIG_SC1200_WDT is not set +# CONFIG_PC87413_WDT is not set +# CONFIG_60XX_WDT is not set +# CONFIG_SBC8360_WDT is not set +# CONFIG_SBC7240_WDT is not set +# CONFIG_CPU5_WDT is not set +# CONFIG_SMSC37B787_WDT is not set +# CONFIG_W83627HF_WDT is not set +# CONFIG_W83697HF_WDT is not set +# CONFIG_W83877F_WDT is not set +# CONFIG_W83977F_WDT is not set +# CONFIG_MACHZ_WDT is not set +# CONFIG_SBC_EPX_C3_WATCHDOG is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_AGP=y +# CONFIG_AGP_ALI is not set +# CONFIG_AGP_ATI is not set +# CONFIG_AGP_AMD is not set +CONFIG_AGP_AMD64=y +CONFIG_AGP_INTEL=y +# CONFIG_AGP_NVIDIA is not set +# CONFIG_AGP_SIS is not set +# CONFIG_AGP_SWORKS is not set +# CONFIG_AGP_VIA is not set +# CONFIG_AGP_EFFICEON is not set +CONFIG_DRM=y +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_I810 is not set +# CONFIG_DRM_I830 is not set +CONFIG_DRM_I915=y +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_SIS is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_VESA is not set +CONFIG_FB_EFI=y +# CONFIG_FB_IMAC is not set +# CONFIG_FB_N411 is not set +# CONFIG_FB_HGA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I810 is not set +# CONFIG_FB_LE80578 is not set +# CONFIG_FB_INTEL is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_GEODE is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set +# CONFIG_BACKLIGHT_PROGEAR is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y -CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128 +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y # # Sound @@ -1043,33 +1498,167 @@ CONFIG_SOUND=y # # Advanced Linux Sound Architecture # -# CONFIG_SND is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_SEQ_DUMMY=y +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y + +# +# Generic devices +# +# CONFIG_SND_PCSP is not set +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set +# CONFIG_SND_CS5535AUDIO is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +CONFIG_SND_HDA_INTEL=y +CONFIG_SND_HDA_HWDEP=y +CONFIG_SND_HDA_CODEC_REALTEK=y +CONFIG_SND_HDA_CODEC_ANALOG=y +CONFIG_SND_HDA_CODEC_SIGMATEL=y +CONFIG_SND_HDA_CODEC_VIA=y +CONFIG_SND_HDA_CODEC_ATIHDMI=y +CONFIG_SND_HDA_CODEC_CONEXANT=y +CONFIG_SND_HDA_CODEC_CMEDIA=y +CONFIG_SND_HDA_CODEC_SI3054=y +CONFIG_SND_HDA_GENERIC=y +# CONFIG_SND_HDA_POWER_SAVE is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SIS7019 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# ALSA SoC audio for Freescale SOCs +# + +# +# SoC Audio for the Texas Instruments OMAP +# # # Open Sound System # -CONFIG_SOUND_PRIME=y -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_OSS is not set +# CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set +CONFIG_HID_DEBUG=y +CONFIG_HIDRAW=y # # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set +CONFIG_USB_HIDINPUT_POWERBOOK=y +CONFIG_HID_FF=y +CONFIG_HID_PID=y +CONFIG_LOGITECH_FF=y +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_PANTHERLORD_FF=y +CONFIG_THRUSTMASTER_FF=y +CONFIG_ZEROPLUS_FF=y +CONFIG_USB_HIDDEV=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y -# CONFIG_USB_DEBUG is not set +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options @@ -1077,18 +1666,18 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set +CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1121,8 +1710,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_LIBUSUAL=y # # USB Imaging devices @@ -1134,10 +1725,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1163,90 +1750,125 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y # -# USB DSL modem support +# LED drivers # +# CONFIG_LEDS_CLEVO_MAIL is not set # -# USB Gadget Support +# LED Triggers # -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_EDAC=y # -# LED devices +# Reporting subsystems # -# CONFIG_NEW_LEDS is not set +# CONFIG_EDAC_DEBUG is not set +# CONFIG_EDAC_MM_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set # -# LED drivers +# RTC interfaces # +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# LED Triggers +# I2C RTC drivers # -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # -# Real Time Clock +# SPI RTC drivers # -# CONFIG_RTC_CLASS is not set # -# DMA Engine support +# Platform RTC drivers # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# DMA Clients +# on-CPU RTC drivers # +CONFIG_DMADEVICES=y # # DMA Devices # -CONFIG_VIRTUALIZATION=y -# CONFIG_KVM is not set +# CONFIG_INTEL_IOATDMA is not set +# CONFIG_UIO is not set # -# Userspace I/O +# Firmware Drivers # -# CONFIG_UIO is not set +# CONFIG_EDD is not set +CONFIG_EFI_VARS=y +# CONFIG_DELL_RBU is not set +# CONFIG_DCDBAS is not set +CONFIG_DMIID=y +# CONFIG_ISCSI_IBFT_FIND is not set # # File systems # -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y -# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -# CONFIG_REISERFS_FS_SECURITY is not set +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1256,8 +1878,8 @@ CONFIG_GENERIC_ACL=y # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set +CONFIG_JOLIET=y +CONFIG_ZISOFS=y # CONFIG_UDF_FS is not set # @@ -1275,13 +1897,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1289,6 +1911,7 @@ CONFIG_RAMFS=y # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -1296,33 +1919,15 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set @@ -1332,14 +1937,26 @@ CONFIG_SUNRPC=y # # Partition Types # -# CONFIG_PARTITION_ADVANCED is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_LDM_PARTITION is not set +CONFIG_SGI_PARTITION=y +# CONFIG_ULTRIX_PARTITION is not set +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set @@ -1374,37 +1991,33 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_KPROBES=y # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y -# CONFIG_DEBUG_FS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set +CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1419,48 +2032,174 @@ CONFIG_TIMER_STATS=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set -# CONFIG_FRAME_POINTER is not set -CONFIG_OPTIMIZE_INLINING=y +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_PROVIDE_OHCI1394_DMA_INIT=y +# CONFIG_SAMPLES is not set +# CONFIG_KGDB is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_NONPROMISC_DEVMEM is not set CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_RODATA is not set +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_X86_PTDUMP is not set +CONFIG_DEBUG_RODATA=y +# CONFIG_DEBUG_RODATA_TEST is not set +CONFIG_DEBUG_NX_TEST=m # CONFIG_4KSTACKS is not set CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y CONFIG_DOUBLEFAULT=y +CONFIG_IO_DELAY_TYPE_0X80=0 +CONFIG_IO_DELAY_TYPE_0XED=1 +CONFIG_IO_DELAY_TYPE_UDELAY=2 +CONFIG_IO_DELAY_TYPE_NONE=3 +CONFIG_IO_DELAY_0X80=y +# CONFIG_IO_DELAY_0XED is not set +# CONFIG_IO_DELAY_UDELAY is not set +# CONFIG_IO_DELAY_NONE is not set +CONFIG_DEFAULT_IO_DELAY_TYPE=0 +CONFIG_DEBUG_BOOT_PARAMS=y +# CONFIG_CPA_DEBUG is not set # # Security options # -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_CRYPTO is not set +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +# CONFIG_SECURITY_NETWORK_XFRM is not set +CONFIG_SECURITY_CAPABILITIES=y +CONFIG_SECURITY_FILE_CAPABILITIES=y +# CONFIG_SECURITY_ROOTPLUG is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536 +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set +# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set +# CONFIG_SECURITY_SMACK is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_AES_586 is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SALSA20_586 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_TWOFISH_586 is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_PADLOCK is not set +# CONFIG_CRYPTO_DEV_GEODE is not set +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_HAVE_KVM=y +CONFIG_VIRTUALIZATION=y +# CONFIG_KVM is not set +# CONFIG_LGUEST is not set +# CONFIG_VIRTIO_PCI is not set +# CONFIG_VIRTIO_BALLOON is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_X86_SMP=y -CONFIG_X86_HT=y -CONFIG_X86_BIOS_REBOOT=y -CONFIG_X86_TRAMPOLINE=y -CONFIG_KTIME_SCALAR=y diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index 2d6f5b2809d..ae5124e064d 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -1,64 +1,103 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-git14 -# Fri Jul 20 09:53:15 2007 +# Linux kernel version: 2.6.26-rc1 +# Sun May 4 19:59:57 2008 # -CONFIG_X86_64=y CONFIG_64BIT=y +# CONFIG_X86_32 is not set +CONFIG_X86_64=y CONFIG_X86=y +CONFIG_DEFCONFIG_LIST="arch/x86/configs/x86_64_defconfig" +# CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_ZONE_DMA32=y +CONFIG_CLOCKSOURCE_WATCHDOG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y -CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y -CONFIG_QUICKLIST=y -CONFIG_NR_QUICK=2 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_X86_CMPXCHG=y -CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_DMI=y -CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_HWEIGHT=y +# CONFIG_GENERIC_GPIO is not set +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_ARCH_HAS_CPU_RELAX=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ZONE_DMA32=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_AUDIT_ARCH=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_X86_SMP=y +CONFIG_X86_64_SMP=y +CONFIG_X86_HT=y +CONFIG_X86_BIOS_REBOOT=y +CONFIG_X86_TRAMPOLINE=y +# CONFIG_KTIME_SCALAR is not set # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=18 -# CONFIG_CPUSETS is not set -CONFIG_SYSFS_DEPRECATED=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_TREE=y +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_CGROUP_NS=y +# CONFIG_CGROUP_DEVICE is not set +CONFIG_CPUSETS=y +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +# CONFIG_USER_SCHED is not set +CONFIG_CGROUP_SCHED=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +# CONFIG_CGROUP_MEM_RES_CTLR is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_PROC_PID_CPUSET=y CONFIG_RELAY=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -66,13 +105,15 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -82,9 +123,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_MARKERS=y +# CONFIG_OPROFILE is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -96,14 +149,15 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_KMOD is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set @@ -111,107 +165,177 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # # Processor type and features # +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_SMP=y CONFIG_X86_PC=y +# CONFIG_X86_ELAN is not set +# CONFIG_X86_VOYAGER is not set +# CONFIG_X86_NUMAQ is not set +# CONFIG_X86_SUMMIT is not set +# CONFIG_X86_BIGSMP is not set +# CONFIG_X86_VISWS is not set +# CONFIG_X86_GENERICARCH is not set +# CONFIG_X86_ES7000 is not set +# CONFIG_X86_RDC321X is not set # CONFIG_X86_VSMP is not set +# CONFIG_PARAVIRT_GUEST is not set +CONFIG_MEMTEST_BOOTPARAM=y +CONFIG_MEMTEST_BOOTPARAM_VALUE=0 +# CONFIG_M386 is not set +# CONFIG_M486 is not set +# CONFIG_M586 is not set +# CONFIG_M586TSC is not set +# CONFIG_M586MMX is not set +# CONFIG_M686 is not set +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set +# CONFIG_MPENTIUM4 is not set +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set # CONFIG_MK8 is not set +# CONFIG_MCRUSOE is not set +# CONFIG_MEFFICEON is not set +# CONFIG_MWINCHIPC6 is not set +# CONFIG_MWINCHIP2 is not set +# CONFIG_MWINCHIP3D is not set +# CONFIG_MGEODEGX1 is not set +# CONFIG_MGEODE_LX is not set +# CONFIG_MCYRIXIII is not set +# CONFIG_MVIAC3_2 is not set +# CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set -# CONFIG_MCORE2 is not set -CONFIG_GENERIC_CPU=y -CONFIG_X86_L1_CACHE_BYTES=128 -CONFIG_X86_L1_CACHE_SHIFT=7 -CONFIG_X86_INTERNODE_CACHE_BYTES=128 -CONFIG_X86_TSC=y +CONFIG_MCORE2=y +# CONFIG_GENERIC_CPU is not set +CONFIG_X86_CPU=y +CONFIG_X86_L1_CACHE_BYTES=64 +CONFIG_X86_INTERNODE_CACHE_BYTES=64 +CONFIG_X86_CMPXCHG=y +CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_GOOD_APIC=y -# CONFIG_MICROCODE is not set -CONFIG_X86_MSR=y -CONFIG_X86_CPUID=y -CONFIG_X86_HT=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_MTRR=y -CONFIG_SMP=y -CONFIG_SCHED_SMT=y +CONFIG_X86_INTEL_USERCOPY=y +CONFIG_X86_USE_PPRO_CHECKSUM=y +CONFIG_X86_P6_NOP=y +CONFIG_X86_TSC=y +CONFIG_X86_CMOV=y +CONFIG_X86_MINIMUM_CPU_FAMILY=64 +CONFIG_X86_DEBUGCTLMSR=y +CONFIG_HPET_TIMER=y +CONFIG_HPET_EMULATE_RTC=y +CONFIG_DMI=y +CONFIG_GART_IOMMU=y +CONFIG_CALGARY_IOMMU=y +CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y +CONFIG_SWIOTLB=y +CONFIG_IOMMU_HELPER=y +CONFIG_NR_CPUS=4 +# CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y +CONFIG_X86_LOCAL_APIC=y +CONFIG_X86_IO_APIC=y +# CONFIG_X86_MCE is not set +# CONFIG_I8K is not set +# CONFIG_MICROCODE is not set +CONFIG_X86_MSR=y +CONFIG_X86_CPUID=y CONFIG_NUMA=y CONFIG_K8_NUMA=y -CONFIG_NODES_SHIFT=6 CONFIG_X86_64_ACPI_NUMA=y -CONFIG_NUMA_EMU=y +CONFIG_NODES_SPAN_OTHER_NODES=y +# CONFIG_NUMA_EMU is not set +CONFIG_NODES_SHIFT=6 +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSEMEM_VMEMMAP=y + +# +# Memory hotplug is currently incompatible with Software Suspend +# +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y -CONFIG_OUT_OF_LINE_PFN_TO_PAGE=y -CONFIG_NR_CPUS=32 -CONFIG_PHYSICAL_ALIGN=0x200000 -CONFIG_HOTPLUG_CPU=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_HPET_TIMER=y -CONFIG_HPET_EMULATE_RTC=y -CONFIG_GART_IOMMU=y -# CONFIG_CALGARY_IOMMU is not set -CONFIG_SWIOTLB=y -CONFIG_X86_MCE=y -CONFIG_X86_MCE_INTEL=y -CONFIG_X86_MCE_AMD=y -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set -# CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_START=0x200000 +CONFIG_MTRR=y +# CONFIG_X86_PAT is not set +CONFIG_EFI=y CONFIG_SECCOMP=y -# CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set -CONFIG_HZ_250=y +# CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_K8_NB=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_ISA_DMA_API=y -CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +CONFIG_SCHED_HRTICK=y +CONFIG_KEXEC=y +CONFIG_CRASH_DUMP=y +CONFIG_PHYSICAL_START=0x1000000 +CONFIG_RELOCATABLE=y +CONFIG_PHYSICAL_ALIGN=0x200000 +CONFIG_HOTPLUG_CPU=y +# CONFIG_COMPAT_VDSO is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y # # Power management options # +CONFIG_ARCH_HIBERNATION_HEADER=y CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_TRACE=y +CONFIG_PM_TRACE_RTC=y +CONFIG_PM_SLEEP_SMP=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" - -# -# ACPI (Advanced Configuration and Power Interface) Support -# CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SLEEP_PROC_FS=y -CONFIG_ACPI_SLEEP_PROC_SLEEP=y CONFIG_ACPI_PROCFS=y +CONFIG_ACPI_PROCFS_POWER=y +CONFIG_ACPI_SYSFS_POWER=y +CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y -# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_DOCK=y +# CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_NUMA=y +# CONFIG_ACPI_WMI is not set # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set +# CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y @@ -227,29 +351,34 @@ CONFIG_ACPI_CONTAINER=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_STAT is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # CPUFreq processor drivers # -CONFIG_X86_POWERNOW_K8=y -CONFIG_X86_POWERNOW_K8_ACPI=y -# CONFIG_X86_SPEEDSTEP_CENTRINO is not set CONFIG_X86_ACPI_CPUFREQ=y +# CONFIG_X86_POWERNOW_K8 is not set +# CONFIG_X86_SPEEDSTEP_CENTRINO is not set +# CONFIG_X86_P4_CLOCKMOD is not set # # shared options # -CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y +# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y # # Bus options (PCI etc.) @@ -257,27 +386,56 @@ CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y +CONFIG_PCI_DOMAINS=y +CONFIG_DMAR=y +CONFIG_DMAR_GFX_WA=y +CONFIG_DMAR_FLOPPY_WA=y CONFIG_PCIEPORTBUS=y +# CONFIG_HOTPLUG_PCI_PCIE is not set CONFIG_PCIEAER=y +# CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set -# CONFIG_HT_IRQ is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set +CONFIG_HT_IRQ=y +CONFIG_ISA_DMA_API=y +CONFIG_K8_NB=y +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=y +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCCARD_NONSTATIC=y +CONFIG_HOTPLUG_PCI=y +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_ACPI is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set +CONFIG_COMPAT_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y CONFIG_IA32_EMULATION=y -CONFIG_IA32_AOUT=y +# CONFIG_IA32_AOUT is not set CONFIG_COMPAT=y +CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y # @@ -289,22 +447,31 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set +CONFIG_PACKET_MMAP=y CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +# CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set +CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -313,31 +480,109 @@ CONFIG_INET_TUNNEL=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_INET_LRO=y +# CONFIG_INET_DIAG is not set +CONFIG_TCP_CONG_ADVANCED=y +# CONFIG_TCP_CONG_BIC is not set CONFIG_TCP_CONG_CUBIC=y +# CONFIG_TCP_CONG_WESTWOOD is not set +# CONFIG_TCP_CONG_HTCP is not set +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_VENO is not set +# CONFIG_TCP_CONG_YEAH is not set +# CONFIG_TCP_CONG_ILLINOIS is not set +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set +CONFIG_TCP_MD5SIG=y +# CONFIG_IP_VS is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set +CONFIG_INET6_AH=y +CONFIG_INET6_ESP=y # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET6_XFRM_MODE_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_BEET is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set +# CONFIG_IPV6_MROUTE is not set +CONFIG_NETLABEL=y +CONFIG_NETWORK_SECMARK=y +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_ADVANCED is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK_LOG=y +CONFIG_NF_CONNTRACK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_FTP=y +CONFIG_NF_CONNTRACK_IRC=y +CONFIG_NF_CONNTRACK_SIP=y +CONFIG_NF_CT_NETLINK=y +CONFIG_NETFILTER_XTABLES=y +CONFIG_NETFILTER_XT_TARGET_MARK=y +CONFIG_NETFILTER_XT_TARGET_NFLOG=y +CONFIG_NETFILTER_XT_TARGET_SECMARK=y +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y +CONFIG_NETFILTER_XT_TARGET_TCPMSS=y +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y +CONFIG_NETFILTER_XT_MATCH_MARK=y +CONFIG_NETFILTER_XT_MATCH_POLICY=y +CONFIG_NETFILTER_XT_MATCH_STATE=y + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=y +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +CONFIG_IP_NF_TARGET_LOG=y +CONFIG_IP_NF_TARGET_ULOG=y +CONFIG_NF_NAT=y +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=y +CONFIG_NF_NAT_FTP=y +CONFIG_NF_NAT_IRC=y +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set +CONFIG_NF_NAT_SIP=y +CONFIG_IP_NF_MANGLE=y + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=y +CONFIG_IP6_NF_IPTABLES=y +CONFIG_IP6_NF_MATCH_IPV6HEADER=y +CONFIG_IP6_NF_FILTER=y +CONFIG_IP6_NF_TARGET_LOG=y +CONFIG_IP6_NF_TARGET_REJECT=y +CONFIG_IP6_NF_MANGLE=y # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set @@ -345,6 +590,7 @@ CONFIG_IPV6_SIT=y # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set +CONFIG_LLC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set @@ -352,28 +598,99 @@ CONFIG_IPV6_SIT=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_RR is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_INGRESS is not set + +# +# Classification +# +CONFIG_NET_CLS=y +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +# CONFIG_NET_EMATCH_CMP is not set +# CONFIG_NET_EMATCH_NBYTE is not set +# CONFIG_NET_EMATCH_U32 is not set +# CONFIG_NET_EMATCH_META is not set +# CONFIG_NET_EMATCH_TEXT is not set +CONFIG_NET_CLS_ACT=y +# CONFIG_NET_ACT_POLICE is not set +# CONFIG_NET_ACT_GACT is not set +# CONFIG_NET_ACT_MIRRED is not set +# CONFIG_NET_ACT_IPT is not set +# CONFIG_NET_ACT_NAT is not set +# CONFIG_NET_ACT_PEDIT is not set +# CONFIG_NET_ACT_SIMP is not set +CONFIG_NET_SCH_FIFO=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set -# CONFIG_HAMRADIO is not set +CONFIG_HAMRADIO=y + +# +# Packet Radio protocols +# +# CONFIG_AX25 is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y # # Wireless # -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set +CONFIG_CFG80211=y +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_NONE is not set + +# +# Selecting 'y' for an algorithm will +# + +# +# build the algorithm into mac80211. +# +CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set +# CONFIG_MAC80211_DEBUG is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -385,13 +702,15 @@ CONFIG_IPV6_SIT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set +CONFIG_DEBUG_DEVRES=y # CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y @@ -402,7 +721,7 @@ CONFIG_PNP=y # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_FD=y +# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -415,8 +734,8 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -425,72 +744,16 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ACER_WMI is not set +# CONFIG_ASUS_LAPTOP is not set +# CONFIG_FUJITSU_LAPTOP is not set +# CONFIG_MSI_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_HD_IDE is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -CONFIG_BLK_DEV_IDEACPI=y -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_CMD640 is not set -# CONFIG_BLK_DEV_IDEPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -CONFIG_IDEPCI_PCIBUS_ORDER=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_RZ1000 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_ATIIXP=y -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_SC1200 is not set -CONFIG_BLK_DEV_PIIX=y -# CONFIG_BLK_DEV_IT8213 is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -CONFIG_BLK_DEV_PDC202XX_NEW=y -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SIS5513 is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_BLK_DEV_HD is not set +# CONFIG_INTEL_MENLOW is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support @@ -499,8 +762,8 @@ CONFIG_BLK_DEV_IDEDMA=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set -CONFIG_SCSI_NETLINK=y -# CONFIG_SCSI_PROC_FS is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) @@ -509,7 +772,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set @@ -526,73 +789,37 @@ CONFIG_SCSI_WAIT_SCAN=m # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -CONFIG_SCSI_SAS_ATTRS=y +# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -CONFIG_SCSI_AIC79XX=y -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=4000 -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y -CONFIG_SATA_SVW=y +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set CONFIG_ATA_PIIX=y # CONFIG_SATA_MV is not set -CONFIG_SATA_NV=y +# CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set -CONFIG_SATA_SIL=y -# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIL is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set -CONFIG_SATA_VIA=y +# CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ACPI is not set # CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set +CONFIG_PATA_AMD=y # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set @@ -612,11 +839,14 @@ CONFIG_SATA_VIA=y # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set +CONFIG_PATA_OLDPIIX=y # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set @@ -628,65 +858,42 @@ CONFIG_SATA_VIA=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_MD=y +# CONFIG_MD_LINEAR is not set +# CONFIG_MD_RAID0 is not set +# CONFIG_MD_RAID1 is not set +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y # CONFIG_DM_DEBUG is not set # CONFIG_DM_CRYPT is not set # CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set +CONFIG_DM_MIRROR=y +CONFIG_DM_ZERO=y # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=y -CONFIG_FUSION_SPI=y -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set -CONFIG_FUSION_MAX_SGE=128 -# CONFIG_FUSION_CTL is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set -CONFIG_IEEE1394=y - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# Controllers -# - -# -# Texas Instruments PCILynx requires I2C -# -CONFIG_IEEE1394_OHCI1394=y - -# -# Protocols -# -# CONFIG_IEEE1394_VIDEO1394 is not set -# CONFIG_IEEE1394_SBP2 is not set -# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set -# CONFIG_IEEE1394_ETH1394 is not set -# CONFIG_IEEE1394_DV1394 is not set -CONFIG_IEEE1394_RAWIO=y +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_MACINTOSH_DRIVERS=y -# CONFIG_MAC_EMUMOUSEBTN is not set +CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y -CONFIG_NETDEVICES_MULTIQUEUE=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_IFB is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set -CONFIG_TUN=y +# CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set @@ -696,39 +903,40 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y -CONFIG_VORTEX=y +# CONFIG_VORTEX is not set # CONFIG_TYPHOON is not set CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set -CONFIG_TULIP=y -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -# CONFIG_TULIP_NAPI is not set +# CONFIG_TULIP is not set # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set +# CONFIG_PCMCIA_XIRCOM is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set -CONFIG_AMD8111_ETH=y -# CONFIG_AMD8111E_NAPI is not set +# CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set -CONFIG_B44=y +# CONFIG_B44 is not set CONFIG_FORCEDETH=y # CONFIG_FORCEDETH_NAPI is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set -CONFIG_8139CP=y +# CONFIG_8139CP is not set CONFIG_8139TOO=y -# CONFIG_8139TOO_PIO is not set +CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -740,34 +948,74 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set -# CONFIG_SKY2 is not set +CONFIG_SKY2=y +# CONFIG_SKY2_DEBUG is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y -CONFIG_BNX2=y +# CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set -CONFIG_S2IO=m -# CONFIG_S2IO_NAPI is not set +# CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set -# CONFIG_TR is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set +CONFIG_TR=y +# CONFIG_IBMOL is not set +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_LIBERTAS is not set +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_ADM8211 is not set +# CONFIG_P54_COMMON is not set +CONFIG_ATH5K=y +# CONFIG_ATH5K_DEBUG is not set +# CONFIG_IWLWIFI is not set +# CONFIG_IWLCORE is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set # # USB Network Adapters @@ -776,16 +1024,26 @@ CONFIG_S2IO=m # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +# CONFIG_PCMCIA_PCNET is not set +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set # CONFIG_WAN is not set -# CONFIG_FDDI is not set +CONFIG_FDDI=y +# CONFIG_DEFXX is not set +# CONFIG_SKFP is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y @@ -796,18 +1054,17 @@ CONFIG_NET_POLL_CONTROLLER=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_POLLDEV=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -832,17 +1089,62 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_ANALOG is not set +# CONFIG_JOYSTICK_A3D is not set +# CONFIG_JOYSTICK_ADI is not set +# CONFIG_JOYSTICK_COBRA is not set +# CONFIG_JOYSTICK_GF2K is not set +# CONFIG_JOYSTICK_GRIP is not set +# CONFIG_JOYSTICK_GRIP_MP is not set +# CONFIG_JOYSTICK_GUILLEMOT is not set +# CONFIG_JOYSTICK_INTERACT is not set +# CONFIG_JOYSTICK_SIDEWINDER is not set +# CONFIG_JOYSTICK_TMDC is not set +# CONFIG_JOYSTICK_IFORCE is not set +# CONFIG_JOYSTICK_WARRIOR is not set +# CONFIG_JOYSTICK_MAGELLAN is not set +# CONFIG_JOYSTICK_SPACEORB is not set +# CONFIG_JOYSTICK_SPACEBALL is not set +# CONFIG_JOYSTICK_STINGER is not set +# CONFIG_JOYSTICK_TWIDJOY is not set +# CONFIG_JOYSTICK_ZHENHUA is not set +# CONFIG_JOYSTICK_JOYDUMP is not set +# CONFIG_JOYSTICK_XPAD is not set +CONFIG_INPUT_TABLET=y +# CONFIG_TABLET_USB_ACECAD is not set +# CONFIG_TABLET_USB_AIPTEK is not set +# CONFIG_TABLET_USB_GTCO is not set +# CONFIG_TABLET_USB_KBTAB is not set +# CONFIG_TABLET_USB_WACOM is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_PCSPKR is not set +# CONFIG_INPUT_APANEL is not set +# CONFIG_INPUT_ATLAS_BTNS is not set +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_UINPUT is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y @@ -855,8 +1157,26 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINK is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_RIO is not set +# CONFIG_STALDRV is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -866,9 +1186,14 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y -CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support @@ -877,78 +1202,260 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_INTEL=y -CONFIG_HW_RANDOM_AMD=y -# CONFIG_NVRAM is not set -CONFIG_RTC=y +# CONFIG_HW_RANDOM_INTEL is not set +# CONFIG_HW_RANDOM_AMD is not set +CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -CONFIG_AGP=y -CONFIG_AGP_AMD64=y -CONFIG_AGP_INTEL=y -# CONFIG_AGP_SIS is not set -# CONFIG_AGP_VIA is not set -# CONFIG_DRM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=256 +# CONFIG_RAW_DRIVER is not set CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set -CONFIG_HPET_MMAP=y +# CONFIG_HPET_MMAP is not set # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set - -# -# SPI support -# +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +CONFIG_I2C_I801=y +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set # CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +# CONFIG_ALIM1535_WDT is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_SC520_WDT is not set +# CONFIG_EUROTECH_WDT is not set +# CONFIG_IB700_WDT is not set +# CONFIG_IBMASR is not set +# CONFIG_WAFER_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_ITCO_WDT is not set +# CONFIG_IT8712F_WDT is not set +# CONFIG_HP_WATCHDOG is not set +# CONFIG_SC1200_WDT is not set +# CONFIG_PC87413_WDT is not set +# CONFIG_60XX_WDT is not set +# CONFIG_SBC8360_WDT is not set +# CONFIG_CPU5_WDT is not set +# CONFIG_SMSC37B787_WDT is not set +# CONFIG_W83627HF_WDT is not set +# CONFIG_W83697HF_WDT is not set +# CONFIG_W83877F_WDT is not set +# CONFIG_W83977F_WDT is not set +# CONFIG_MACHZ_WDT is not set +# CONFIG_SBC_EPX_C3_WATCHDOG is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_AGP=y +CONFIG_AGP_AMD64=y +CONFIG_AGP_INTEL=y +# CONFIG_AGP_SIS is not set +# CONFIG_AGP_VIA is not set +CONFIG_DRM=y +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_I810 is not set +# CONFIG_DRM_I830 is not set +CONFIG_DRM_I915=y +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_SIS is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_VESA is not set +CONFIG_FB_EFI=y +# CONFIG_FB_IMAC is not set +# CONFIG_FB_N411 is not set +# CONFIG_FB_HGA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_LE80578 is not set +# CONFIG_FB_INTEL is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_GEODE is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set +# CONFIG_BACKLIGHT_PROGEAR is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y -CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256 +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y # # Sound @@ -958,33 +1465,165 @@ CONFIG_SOUND=y # # Advanced Linux Sound Architecture # -# CONFIG_SND is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_SEQ_DUMMY=y +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y + +# +# Generic devices +# +# CONFIG_SND_PCSP is not set +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +CONFIG_SND_HDA_INTEL=y +CONFIG_SND_HDA_HWDEP=y +CONFIG_SND_HDA_CODEC_REALTEK=y +CONFIG_SND_HDA_CODEC_ANALOG=y +CONFIG_SND_HDA_CODEC_SIGMATEL=y +CONFIG_SND_HDA_CODEC_VIA=y +CONFIG_SND_HDA_CODEC_ATIHDMI=y +CONFIG_SND_HDA_CODEC_CONEXANT=y +CONFIG_SND_HDA_CODEC_CMEDIA=y +CONFIG_SND_HDA_CODEC_SI3054=y +CONFIG_SND_HDA_GENERIC=y +# CONFIG_SND_HDA_POWER_SAVE is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# ALSA SoC audio for Freescale SOCs +# + +# +# SoC Audio for the Texas Instruments OMAP +# # # Open Sound System # -CONFIG_SOUND_PRIME=y -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_OSS is not set +# CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set +CONFIG_HID_DEBUG=y +CONFIG_HIDRAW=y # # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set +CONFIG_USB_HIDINPUT_POWERBOOK=y +CONFIG_HID_FF=y +CONFIG_HID_PID=y +CONFIG_LOGITECH_FF=y +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_PANTHERLORD_FF=y +CONFIG_THRUSTMASTER_FF=y +CONFIG_ZEROPLUS_FF=y +CONFIG_USB_HIDDEV=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y -# CONFIG_USB_DEBUG is not set +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options @@ -992,18 +1631,18 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set +CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1036,8 +1675,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_LIBUSUAL=y # # USB Imaging devices @@ -1049,10 +1690,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1078,98 +1715,126 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y # -# USB DSL modem support +# LED drivers # +# CONFIG_LEDS_CLEVO_MAIL is not set # -# USB Gadget Support +# LED Triggers # -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_EDAC=y # -# LED devices +# Reporting subsystems # -# CONFIG_NEW_LEDS is not set +# CONFIG_EDAC_DEBUG is not set +# CONFIG_EDAC_MM_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set # -# LED drivers +# RTC interfaces # +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# LED Triggers +# I2C RTC drivers # -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # -# Real Time Clock +# SPI RTC drivers # -# CONFIG_RTC_CLASS is not set # -# DMA Engine support +# Platform RTC drivers # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# DMA Clients +# on-CPU RTC drivers # +CONFIG_DMADEVICES=y # # DMA Devices # -CONFIG_VIRTUALIZATION=y -# CONFIG_KVM is not set - -# -# Userspace I/O -# +# CONFIG_INTEL_IOATDMA is not set # CONFIG_UIO is not set # # Firmware Drivers # # CONFIG_EDD is not set +CONFIG_EFI_VARS=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y +# CONFIG_ISCSI_IBFT_FIND is not set # # File systems # -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y -# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -# CONFIG_REISERFS_FS_SECURITY is not set +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1180,7 +1845,7 @@ CONFIG_GENERIC_ACL=y # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set +CONFIG_ZISOFS=y # CONFIG_UDF_FS is not set # @@ -1198,13 +1863,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1212,6 +1877,7 @@ CONFIG_RAMFS=y # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -1219,33 +1885,15 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set @@ -1255,14 +1903,26 @@ CONFIG_SUNRPC=y # # Partition Types # -# CONFIG_PARTITION_ADVANCED is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_LDM_PARTITION is not set +CONFIG_SGI_PARTITION=y +# CONFIG_ULTRIX_PARTITION is not set +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set @@ -1297,40 +1957,33 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Instrumentation Support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_KPROBES=y - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set +CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y -# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1344,28 +1997,162 @@ CONFIG_TIMER_STATS=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set -# CONFIG_FRAME_POINTER is not set -CONFIG_OPTIMIZE_INLINING=y +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set -# CONFIG_DEBUG_RODATA is not set -# CONFIG_IOMMU_DEBUG is not set +# CONFIG_LATENCYTOP is not set +CONFIG_PROVIDE_OHCI1394_DMA_INIT=y +# CONFIG_SAMPLES is not set +# CONFIG_KGDB is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_NONPROMISC_DEVMEM is not set +CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUG_PER_CPU_MAPS is not set +# CONFIG_X86_PTDUMP is not set +CONFIG_DEBUG_RODATA=y +# CONFIG_DIRECT_GBPAGES is not set +# CONFIG_DEBUG_RODATA_TEST is not set +CONFIG_DEBUG_NX_TEST=m +CONFIG_X86_MPPARSE=y +# CONFIG_IOMMU_DEBUG is not set +CONFIG_IO_DELAY_TYPE_0X80=0 +CONFIG_IO_DELAY_TYPE_0XED=1 +CONFIG_IO_DELAY_TYPE_UDELAY=2 +CONFIG_IO_DELAY_TYPE_NONE=3 +CONFIG_IO_DELAY_0X80=y +# CONFIG_IO_DELAY_0XED is not set +# CONFIG_IO_DELAY_UDELAY is not set +# CONFIG_IO_DELAY_NONE is not set +CONFIG_DEFAULT_IO_DELAY_TYPE=0 +CONFIG_DEBUG_BOOT_PARAMS=y +# CONFIG_CPA_DEBUG is not set # # Security options # -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_CRYPTO is not set +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +# CONFIG_SECURITY_NETWORK_XFRM is not set +CONFIG_SECURITY_CAPABILITIES=y +CONFIG_SECURITY_FILE_CAPABILITIES=y +# CONFIG_SECURITY_ROOTPLUG is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536 +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set +# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set +# CONFIG_SECURITY_SMACK is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_AES_X86_64 is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SALSA20_X86_64 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_TWOFISH_X86_64 is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_HAVE_KVM=y +CONFIG_VIRTUALIZATION=y +# CONFIG_KVM is not set +# CONFIG_VIRTIO_PCI is not set +# CONFIG_VIRTIO_BALLOON is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index b5e329da166..3aefbce2de4 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -370,13 +370,11 @@ quiet_ni_syscall: PTREGSCALL stub32_rt_sigreturn, sys32_rt_sigreturn, %rdi PTREGSCALL stub32_sigreturn, sys32_sigreturn, %rdi PTREGSCALL stub32_sigaltstack, sys32_sigaltstack, %rdx - PTREGSCALL stub32_sigsuspend, sys32_sigsuspend, %rcx PTREGSCALL stub32_execve, sys32_execve, %rcx PTREGSCALL stub32_fork, sys_fork, %rdi PTREGSCALL stub32_clone, sys32_clone, %rdx PTREGSCALL stub32_vfork, sys_vfork, %rdi PTREGSCALL stub32_iopl, sys_iopl, %rsi - PTREGSCALL stub32_rt_sigsuspend, sys_rt_sigsuspend, %rdx ENTRY(ia32_ptregs_common) popq %r11 @@ -476,7 +474,7 @@ ia32_sys_call_table: .quad sys_ssetmask .quad sys_setreuid16 /* 70 */ .quad sys_setregid16 - .quad stub32_sigsuspend + .quad sys32_sigsuspend .quad compat_sys_sigpending .quad sys_sethostname .quad compat_sys_setrlimit /* 75 */ @@ -583,7 +581,7 @@ ia32_sys_call_table: .quad sys32_rt_sigpending .quad compat_sys_rt_sigtimedwait .quad sys32_rt_sigqueueinfo - .quad stub32_rt_sigsuspend + .quad sys_rt_sigsuspend .quad sys32_pread /* 180 */ .quad sys32_pwrite .quad sys_chown16 diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 77807d4769c..8a42b797cd6 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -18,14 +18,13 @@ CFLAGS_tsc_64.o := $(nostackp) obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o obj-y += traps_$(BITS).o irq_$(BITS).o obj-y += time_$(BITS).o ioport.o ldt.o -obj-y += setup_$(BITS).o i8259_$(BITS).o setup.o +obj-y += setup_$(BITS).o i8259.o irqinit_$(BITS).o setup.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o obj-y += bootflag.o e820_$(BITS).o obj-y += pci-dma.o quirks.o i8237.o topology.o kdebugfs.o obj-y += alternative.o i8253.o pci-nommu.o -obj-$(CONFIG_X86_64) += bugs_64.o obj-y += tsc_$(BITS).o io_delay.o rtc.o obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 479926d9e00..e819362c706 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -35,6 +35,18 @@ int fallback_aper_force __initdata; int fix_aperture __initdata = 1; +struct bus_dev_range { + int bus; + int dev_base; + int dev_limit; +}; + +static struct bus_dev_range bus_dev_ranges[] __initdata = { + { 0x00, 0x18, 0x20}, + { 0xff, 0x00, 0x20}, + { 0xfe, 0x00, 0x20} +}; + static struct resource gart_resource = { .name = "GART", .flags = IORESOURCE_MEM, @@ -55,8 +67,9 @@ static u32 __init allocate_aperture(void) u32 aper_size; void *p; - if (fallback_aper_order > 7) - fallback_aper_order = 7; + /* aper_size should <= 1G */ + if (fallback_aper_order > 5) + fallback_aper_order = 5; aper_size = (32 * 1024 * 1024) << fallback_aper_order; /* @@ -65,7 +78,20 @@ static u32 __init allocate_aperture(void) * memory. Unfortunately we cannot move it up because that would * make the IOMMU useless. */ - p = __alloc_bootmem_nopanic(aper_size, aper_size, 0); + /* + * using 512M as goal, in case kexec will load kernel_big + * that will do the on position decompress, and could overlap with + * that positon with gart that is used. + * sequende: + * kernel_small + * ==> kexec (with kdump trigger path or previous doesn't shutdown gart) + * ==> kernel_small(gart area become e820_reserved) + * ==> kexec (with kdump trigger path or previous doesn't shutdown gart) + * ==> kerne_big (uncompressed size will be big than 64M or 128M) + * so don't use 512M below as gart iommu, leave the space for kernel + * code for safe + */ + p = __alloc_bootmem_nopanic(aper_size, aper_size, 512ULL<<20); if (!p || __pa(p)+aper_size > 0xffffffff) { printk(KERN_ERR "Cannot allocate aperture memory hole (%p,%uK)\n", @@ -83,69 +109,53 @@ static u32 __init allocate_aperture(void) return (u32)__pa(p); } -static int __init aperture_valid(u64 aper_base, u32 aper_size) -{ - if (!aper_base) - return 0; - - if (aper_base + aper_size > 0x100000000UL) { - printk(KERN_ERR "Aperture beyond 4GB. Ignoring.\n"); - return 0; - } - if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) { - printk(KERN_ERR "Aperture pointing to e820 RAM. Ignoring.\n"); - return 0; - } - if (aper_size < 64*1024*1024) { - printk(KERN_ERR "Aperture too small (%d MB)\n", aper_size>>20); - return 0; - } - - return 1; -} /* Find a PCI capability */ -static __u32 __init find_cap(int num, int slot, int func, int cap) +static u32 __init find_cap(int bus, int slot, int func, int cap) { int bytes; u8 pos; - if (!(read_pci_config_16(num, slot, func, PCI_STATUS) & + if (!(read_pci_config_16(bus, slot, func, PCI_STATUS) & PCI_STATUS_CAP_LIST)) return 0; - pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST); + pos = read_pci_config_byte(bus, slot, func, PCI_CAPABILITY_LIST); for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { u8 id; pos &= ~3; - id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID); + id = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_ID); if (id == 0xff) break; if (id == cap) return pos; - pos = read_pci_config_byte(num, slot, func, + pos = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_NEXT); } return 0; } /* Read a standard AGPv3 bridge header */ -static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) +static u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order) { u32 apsize; u32 apsizereg; int nbits; u32 aper_low, aper_hi; u64 aper; + u32 old_order; - printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", num, slot, func); - apsizereg = read_pci_config_16(num, slot, func, cap + 0x14); + printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", bus, slot, func); + apsizereg = read_pci_config_16(bus, slot, func, cap + 0x14); if (apsizereg == 0xffffffff) { printk(KERN_ERR "APSIZE in AGP bridge unreadable\n"); return 0; } + /* old_order could be the value from NB gart setting */ + old_order = *order; + apsize = apsizereg & 0xfff; /* Some BIOS use weird encodings not in the AGPv3 table. */ if (apsize & 0xff) @@ -155,14 +165,26 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) if ((int)*order < 0) /* < 32MB */ *order = 0; - aper_low = read_pci_config(num, slot, func, 0x10); - aper_hi = read_pci_config(num, slot, func, 0x14); + aper_low = read_pci_config(bus, slot, func, 0x10); + aper_hi = read_pci_config(bus, slot, func, 0x14); aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32); + /* + * On some sick chips, APSIZE is 0. It means it wants 4G + * so let double check that order, and lets trust AMD NB settings: + */ + printk(KERN_INFO "Aperture from AGP @ %Lx old size %u MB\n", + aper, 32 << old_order); + if (aper + (32ULL<<(20 + *order)) > 0x100000000ULL) { + printk(KERN_INFO "Aperture size %u MB (APSIZE %x) is not right, using settings from NB\n", + 32 << *order, apsizereg); + *order = old_order; + } + printk(KERN_INFO "Aperture from AGP @ %Lx size %u MB (APSIZE %x)\n", aper, 32 << *order, apsizereg); - if (!aperture_valid(aper, (32*1024*1024) << *order)) + if (!aperture_valid(aper, (32*1024*1024) << *order, 32<<20)) return 0; return (u32)aper; } @@ -180,17 +202,17 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) * the AGP bridges should be always an own bus on the HT hierarchy, * but do it here for future safety. */ -static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) +static u32 __init search_agp_bridge(u32 *order, int *valid_agp) { - int num, slot, func; + int bus, slot, func; /* Poor man's PCI discovery */ - for (num = 0; num < 256; num++) { + for (bus = 0; bus < 256; bus++) { for (slot = 0; slot < 32; slot++) { for (func = 0; func < 8; func++) { u32 class, cap; u8 type; - class = read_pci_config(num, slot, func, + class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION); if (class == 0xffffffff) break; @@ -199,17 +221,17 @@ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) case PCI_CLASS_BRIDGE_HOST: case PCI_CLASS_BRIDGE_OTHER: /* needed? */ /* AGP bridge? */ - cap = find_cap(num, slot, func, + cap = find_cap(bus, slot, func, PCI_CAP_ID_AGP); if (!cap) break; *valid_agp = 1; - return read_agp(num, slot, func, cap, + return read_agp(bus, slot, func, cap, order); } /* No multi-function device? */ - type = read_pci_config_byte(num, slot, func, + type = read_pci_config_byte(bus, slot, func, PCI_HEADER_TYPE); if (!(type & 0x80)) break; @@ -249,36 +271,50 @@ void __init early_gart_iommu_check(void) * or BIOS forget to put that in reserved. * try to update e820 to make that region as reserved. */ - int fix, num; + int i, fix, slot; u32 ctl; u32 aper_size = 0, aper_order = 0, last_aper_order = 0; u64 aper_base = 0, last_aper_base = 0; - int aper_enabled = 0, last_aper_enabled = 0; + int aper_enabled = 0, last_aper_enabled = 0, last_valid = 0; if (!early_pci_allowed()) return; + /* This is mostly duplicate of iommu_hole_init */ fix = 0; - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; - - ctl = read_pci_config(0, num, 3, 0x90); - aper_enabled = ctl & 1; - aper_order = (ctl >> 1) & 7; - aper_size = (32 * 1024 * 1024) << aper_order; - aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff; - aper_base <<= 25; - - if ((last_aper_order && aper_order != last_aper_order) || - (last_aper_base && aper_base != last_aper_base) || - (last_aper_enabled && aper_enabled != last_aper_enabled)) { - fix = 1; - break; + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL); + aper_enabled = ctl & AMD64_GARTEN; + aper_order = (ctl >> 1) & 7; + aper_size = (32 * 1024 * 1024) << aper_order; + aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff; + aper_base <<= 25; + + if (last_valid) { + if ((aper_order != last_aper_order) || + (aper_base != last_aper_base) || + (aper_enabled != last_aper_enabled)) { + fix = 1; + break; + } + } + + last_aper_order = aper_order; + last_aper_base = aper_base; + last_aper_enabled = aper_enabled; + last_valid = 1; } - last_aper_order = aper_order; - last_aper_base = aper_base; - last_aper_enabled = aper_enabled; } if (!fix && !aper_enabled) @@ -290,32 +326,46 @@ void __init early_gart_iommu_check(void) if (gart_fix_e820 && !fix && aper_enabled) { if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) { - /* reserved it, so we can resuse it in second kernel */ + /* reserve it, so we can reuse it in second kernel */ printk(KERN_INFO "update e820 for GART\n"); add_memory_region(aper_base, aper_size, E820_RESERVED); update_e820(); } - return; } + if (!fix) + return; + /* different nodes have different setting, disable them all at first*/ - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; - ctl = read_pci_config(0, num, 3, 0x90); - ctl &= ~1; - write_pci_config(0, num, 3, 0x90, ctl); + ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL); + ctl &= ~AMD64_GARTEN; + write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, ctl); + } } } +static int __initdata printed_gart_size_msg; + void __init gart_iommu_hole_init(void) { + u32 agp_aper_base = 0, agp_aper_order = 0; u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0; u64 aper_base, last_aper_base = 0; - int fix, num, valid_agp = 0; - int node; + int fix, slot, valid_agp = 0; + int i, node; if (gart_iommu_aperture_disabled || !fix_aperture || !early_pci_allowed()) @@ -323,38 +373,63 @@ void __init gart_iommu_hole_init(void) printk(KERN_INFO "Checking aperture...\n"); + if (!fallback_aper_force) + agp_aper_base = search_agp_bridge(&agp_aper_order, &valid_agp); + fix = 0; node = 0; - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; - - iommu_detected = 1; - gart_iommu_aperture = 1; - - aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7; - aper_size = (32 * 1024 * 1024) << aper_order; - aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff; - aper_base <<= 25; - - printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n", - node, aper_base, aper_size >> 20); - node++; - - if (!aperture_valid(aper_base, aper_size)) { - fix = 1; - break; - } + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + iommu_detected = 1; + gart_iommu_aperture = 1; + + aper_order = (read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL) >> 1) & 7; + aper_size = (32 * 1024 * 1024) << aper_order; + aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff; + aper_base <<= 25; + + printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n", + node, aper_base, aper_size >> 20); + node++; + + if (!aperture_valid(aper_base, aper_size, 64<<20)) { + if (valid_agp && agp_aper_base && + agp_aper_base == aper_base && + agp_aper_order == aper_order) { + /* the same between two setting from NB and agp */ + if (!no_iommu && end_pfn > MAX_DMA32_PFN && !printed_gart_size_msg) { + printk(KERN_ERR "you are using iommu with agp, but GART size is less than 64M\n"); + printk(KERN_ERR "please increase GART size in your BIOS setup\n"); + printk(KERN_ERR "if BIOS doesn't have that option, contact your HW vendor!\n"); + printed_gart_size_msg = 1; + } + } else { + fix = 1; + goto out; + } + } - if ((last_aper_order && aper_order != last_aper_order) || - (last_aper_base && aper_base != last_aper_base)) { - fix = 1; - break; + if ((last_aper_order && aper_order != last_aper_order) || + (last_aper_base && aper_base != last_aper_base)) { + fix = 1; + goto out; + } + last_aper_order = aper_order; + last_aper_base = aper_base; } - last_aper_order = aper_order; - last_aper_base = aper_base; } +out: if (!fix && !fallback_aper_force) { if (last_aper_base) { unsigned long n = (32 * 1024 * 1024) << last_aper_order; @@ -364,8 +439,10 @@ void __init gart_iommu_hole_init(void) return; } - if (!fallback_aper_force) - aper_alloc = search_agp_bridge(&aper_order, &valid_agp); + if (!fallback_aper_force) { + aper_alloc = agp_aper_base; + aper_order = agp_aper_order; + } if (aper_alloc) { /* Got the aperture from the AGP bridge */ @@ -401,16 +478,24 @@ void __init gart_iommu_hole_init(void) } /* Fix up the north bridges */ - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; - - /* - * Don't enable translation yet. That is done later. - * Assume this BIOS didn't initialise the GART so - * just overwrite all previous bits - */ - write_pci_config(0, num, 3, 0x90, aper_order<<1); - write_pci_config(0, num, 3, 0x94, aper_alloc>>25); + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + /* Don't enable translation yet. That is done later. + Assume this BIOS didn't initialise the GART so + just overwrite all previous bits */ + write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, aper_order << 1); + write_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE, aper_alloc >> 25); + } } + + set_up_gart_resume(aper_order, aper_alloc); } diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 4b99b1bdeb6..45d8da405ad 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -64,9 +64,8 @@ static int enable_local_apic __initdata; /* Local APIC timer verification ok */ static int local_apic_timer_verify_ok; -/* Disable local APIC timer from the kernel commandline or via dmi quirk - or using CPU MSR check */ -int local_apic_timer_disabled; +/* Disable local APIC timer from the kernel commandline or via dmi quirk */ +static int local_apic_timer_disabled; /* Local APIC timer works in C2 */ int local_apic_timer_c2_ok; EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); @@ -1154,9 +1153,6 @@ static int __init detect_init_APIC(void) if (l & MSR_IA32_APICBASE_ENABLE) mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; - if (nmi_watchdog != NMI_NONE && nmi_watchdog != NMI_DISABLED) - nmi_watchdog = NMI_LOCAL_APIC; - printk(KERN_INFO "Found and enabled local APIC!\n"); apic_pm_activate(); @@ -1269,6 +1265,10 @@ int __init APIC_init_uniprocessor(void) setup_local_APIC(); +#ifdef CONFIG_X86_IO_APIC + if (!smp_found_config || skip_ioapic_setup || !nr_ioapics) +#endif + localise_nmi_watchdog(); end_local_APIC_setup(); #ifdef CONFIG_X86_IO_APIC if (smp_found_config) diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 0633cfd0dc2..3ef7752aa8e 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -43,7 +43,7 @@ #include <mach_ipi.h> #include <mach_apic.h> -int disable_apic_timer __cpuinitdata; +static int disable_apic_timer __cpuinitdata; static int apic_calibrate_pmtmr __initdata; int disable_apic; @@ -422,32 +422,8 @@ void __init setup_boot_APIC_clock(void) setup_APIC_timer(); } -/* - * AMD C1E enabled CPUs have a real nasty problem: Some BIOSes set the - * C1E flag only in the secondary CPU, so when we detect the wreckage - * we already have enabled the boot CPU local apic timer. Check, if - * disable_apic_timer is set and the DUMMY flag is cleared. If yes, - * set the DUMMY flag again and force the broadcast mode in the - * clockevents layer. - */ -static void __cpuinit check_boot_apic_timer_broadcast(void) -{ - if (!disable_apic_timer || - (lapic_clockevent.features & CLOCK_EVT_FEAT_DUMMY)) - return; - - printk(KERN_INFO "AMD C1E detected late. Force timer broadcast.\n"); - lapic_clockevent.features |= CLOCK_EVT_FEAT_DUMMY; - - local_irq_enable(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE, - &boot_cpu_physical_apicid); - local_irq_disable(); -} - void __cpuinit setup_secondary_APIC_clock(void) { - check_boot_apic_timer_broadcast(); setup_APIC_timer(); } @@ -875,7 +851,7 @@ static int __init detect_init_APIC(void) void __init early_init_lapic_mapping(void) { - unsigned long apic_phys; + unsigned long phys_addr; /* * If no local APIC can be found then go out @@ -884,11 +860,11 @@ void __init early_init_lapic_mapping(void) if (!smp_found_config) return; - apic_phys = mp_lapic_addr; + phys_addr = mp_lapic_addr; - set_fixmap_nocache(FIX_APIC_BASE, apic_phys); + set_fixmap_nocache(FIX_APIC_BASE, phys_addr); apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n", - APIC_BASE, apic_phys); + APIC_BASE, phys_addr); /* * Fetch the APIC ID of the BSP in case we have a @@ -954,6 +930,8 @@ int __init APIC_init_uniprocessor(void) if (!skip_ioapic_setup && nr_ioapics) enable_IO_APIC(); + if (!smp_found_config || skip_ioapic_setup || !nr_ioapics) + localise_nmi_watchdog(); end_local_APIC_setup(); if (smp_found_config && !skip_ioapic_setup && nr_ioapics) diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index bf9290e2901..00e6d137095 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -228,6 +228,7 @@ #include <linux/suspend.h> #include <linux/kthread.h> #include <linux/jiffies.h> +#include <linux/smp_lock.h> #include <asm/system.h> #include <asm/uaccess.h> @@ -1149,7 +1150,7 @@ static void queue_event(apm_event_t event, struct apm_user *sender) as->event_tail = 0; } as->events[as->event_head] = event; - if ((!as->suser) || (!as->writer)) + if (!as->suser || !as->writer) continue; switch (event) { case APM_SYS_SUSPEND: @@ -1396,7 +1397,7 @@ static void apm_mainloop(void) static int check_apm_user(struct apm_user *as, const char *func) { - if ((as == NULL) || (as->magic != APM_BIOS_MAGIC)) { + if (as == NULL || as->magic != APM_BIOS_MAGIC) { printk(KERN_ERR "apm: %s passed bad filp\n", func); return 1; } @@ -1459,18 +1460,19 @@ static unsigned int do_poll(struct file *fp, poll_table *wait) return 0; } -static int do_ioctl(struct inode *inode, struct file *filp, - u_int cmd, u_long arg) +static long do_ioctl(struct file *filp, u_int cmd, u_long arg) { struct apm_user *as; + int ret; as = filp->private_data; if (check_apm_user(as, "ioctl")) return -EIO; - if ((!as->suser) || (!as->writer)) + if (!as->suser || !as->writer) return -EPERM; switch (cmd) { case APM_IOC_STANDBY: + lock_kernel(); if (as->standbys_read > 0) { as->standbys_read--; as->standbys_pending--; @@ -1479,8 +1481,10 @@ static int do_ioctl(struct inode *inode, struct file *filp, queue_event(APM_USER_STANDBY, as); if (standbys_pending <= 0) standby(); + unlock_kernel(); break; case APM_IOC_SUSPEND: + lock_kernel(); if (as->suspends_read > 0) { as->suspends_read--; as->suspends_pending--; @@ -1488,16 +1492,17 @@ static int do_ioctl(struct inode *inode, struct file *filp, } else queue_event(APM_USER_SUSPEND, as); if (suspends_pending <= 0) { - return suspend(1); + ret = suspend(1); } else { as->suspend_wait = 1; wait_event_interruptible(apm_suspend_waitqueue, as->suspend_wait == 0); - return as->suspend_result; + ret = as->suspend_result; } - break; + unlock_kernel(); + return ret; default: - return -EINVAL; + return -ENOTTY; } return 0; } @@ -1860,7 +1865,7 @@ static const struct file_operations apm_bios_fops = { .owner = THIS_MODULE, .read = do_read, .poll = do_poll, - .ioctl = do_ioctl, + .unlocked_ioctl = do_ioctl, .open = do_open, .release = do_release, }; diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index a0c6f819088..65b1be5fe9c 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -6,11 +6,15 @@ obj-y := intel_cacheinfo.o addon_cpuid_features.o obj-y += proc.o feature_names.o obj-$(CONFIG_X86_32) += common.o bugs.o +obj-$(CONFIG_X86_64) += bugs_64.o obj-$(CONFIG_X86_32) += amd.o +obj-$(CONFIG_X86_64) += amd_64.o obj-$(CONFIG_X86_32) += cyrix.o obj-$(CONFIG_X86_32) += centaur.o +obj-$(CONFIG_X86_64) += centaur_64.o obj-$(CONFIG_X86_32) += transmeta.o obj-$(CONFIG_X86_32) += intel.o +obj-$(CONFIG_X86_64) += intel_64.o obj-$(CONFIG_X86_32) += umc.o obj-$(CONFIG_X86_MCE) += mcheck/ diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c index c2e1ce33c7c..84a8220a607 100644 --- a/arch/x86/kernel/cpu/addon_cpuid_features.c +++ b/arch/x86/kernel/cpu/addon_cpuid_features.c @@ -1,9 +1,7 @@ - /* * Routines to indentify additional cpu features that are scattered in * cpuid space. */ - #include <linux/cpu.h> #include <asm/pat.h> @@ -53,19 +51,20 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c) #ifdef CONFIG_X86_PAT void __cpuinit validate_pat_support(struct cpuinfo_x86 *c) { + if (!cpu_has_pat) + pat_disable("PAT not supported by CPU."); + switch (c->x86_vendor) { - case X86_VENDOR_AMD: - if (c->x86 >= 0xf && c->x86 <= 0x11) - return; - break; case X86_VENDOR_INTEL: if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15)) return; break; + case X86_VENDOR_AMD: + case X86_VENDOR_CENTAUR: + case X86_VENDOR_TRANSMETA: + return; } - pat_disable(cpu_has_pat ? - "PAT disabled. Not yet verified on this CPU type." : - "PAT not supported by CPU."); + pat_disable("PAT disabled. Not yet verified on this CPU type."); } #endif diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 24586682829..81a07ca65d4 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -24,43 +24,6 @@ extern void vide(void); __asm__(".align 4\nvide: ret"); -#ifdef CONFIG_X86_LOCAL_APIC -#define ENABLE_C1E_MASK 0x18000000 -#define CPUID_PROCESSOR_SIGNATURE 1 -#define CPUID_XFAM 0x0ff00000 -#define CPUID_XFAM_K8 0x00000000 -#define CPUID_XFAM_10H 0x00100000 -#define CPUID_XFAM_11H 0x00200000 -#define CPUID_XMOD 0x000f0000 -#define CPUID_XMOD_REV_F 0x00040000 - -/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */ -static __cpuinit int amd_apic_timer_broken(void) -{ - u32 lo, hi; - u32 eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - switch (eax & CPUID_XFAM) { - case CPUID_XFAM_K8: - if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F) - break; - case CPUID_XFAM_10H: - case CPUID_XFAM_11H: - rdmsr(MSR_K8_ENABLE_C1E, lo, hi); - if (lo & ENABLE_C1E_MASK) { - if (smp_processor_id() != boot_cpu_physical_apicid) - printk(KERN_INFO "AMD C1E detected late. " - " Force timer broadcast.\n"); - return 1; - } - break; - default: - /* err on the side of caution */ - return 1; - } - return 0; -} -#endif - int force_mwait __cpuinitdata; static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) @@ -297,11 +260,6 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) num_cache_leaves = 3; } -#ifdef CONFIG_X86_LOCAL_APIC - if (amd_apic_timer_broken()) - local_apic_timer_disabled = 1; -#endif - /* K6s reports MCEs but don't actually have all the MSRs */ if (c->x86 < 6) clear_cpu_cap(c, X86_FEATURE_MCE); diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c new file mode 100644 index 00000000000..30b7557c964 --- /dev/null +++ b/arch/x86/kernel/cpu/amd_64.c @@ -0,0 +1,211 @@ +#include <linux/init.h> +#include <linux/mm.h> + +#include <asm/numa_64.h> +#include <asm/mmconfig.h> +#include <asm/cacheflush.h> + +#include <mach_apic.h> + +#include "cpu.h" + +int force_mwait __cpuinitdata; + +#ifdef CONFIG_NUMA +static int __cpuinit nearby_node(int apicid) +{ + int i, node; + + for (i = apicid - 1; i >= 0; i--) { + node = apicid_to_node[i]; + if (node != NUMA_NO_NODE && node_online(node)) + return node; + } + for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { + node = apicid_to_node[i]; + if (node != NUMA_NO_NODE && node_online(node)) + return node; + } + return first_node(node_online_map); /* Shouldn't happen */ +} +#endif + +/* + * On a AMD dual core setup the lower bits of the APIC id distingush the cores. + * Assumes number of cores is a power of two. + */ +static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_SMP + unsigned bits; +#ifdef CONFIG_NUMA + int cpu = smp_processor_id(); + int node = 0; + unsigned apicid = hard_smp_processor_id(); +#endif + bits = c->x86_coreid_bits; + + /* Low order bits define the core id (index of core in socket) */ + c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); + /* Convert the initial APIC ID into the socket ID */ + c->phys_proc_id = c->initial_apicid >> bits; + +#ifdef CONFIG_NUMA + node = c->phys_proc_id; + if (apicid_to_node[apicid] != NUMA_NO_NODE) + node = apicid_to_node[apicid]; + if (!node_online(node)) { + /* Two possibilities here: + - The CPU is missing memory and no node was created. + In that case try picking one from a nearby CPU + - The APIC IDs differ from the HyperTransport node IDs + which the K8 northbridge parsing fills in. + Assume they are all increased by a constant offset, + but in the same order as the HT nodeids. + If that doesn't result in a usable node fall back to the + path for the previous case. */ + + int ht_nodeid = c->initial_apicid; + + if (ht_nodeid >= 0 && + apicid_to_node[ht_nodeid] != NUMA_NO_NODE) + node = apicid_to_node[ht_nodeid]; + /* Pick a nearby node */ + if (!node_online(node)) + node = nearby_node(apicid); + } + numa_set_node(cpu, node); + + printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); +#endif +#endif +} + +static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_SMP + unsigned bits, ecx; + + /* Multi core CPU? */ + if (c->extended_cpuid_level < 0x80000008) + return; + + ecx = cpuid_ecx(0x80000008); + + c->x86_max_cores = (ecx & 0xff) + 1; + + /* CPU telling us the core id bits shift? */ + bits = (ecx >> 12) & 0xF; + + /* Otherwise recompute */ + if (bits == 0) { + while ((1 << bits) < c->x86_max_cores) + bits++; + } + + c->x86_coreid_bits = bits; + +#endif +} + +static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) +{ + early_init_amd_mc(c); + + /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */ + if (c->x86_power & (1<<8)) + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); +} + +static void __cpuinit init_amd(struct cpuinfo_x86 *c) +{ + unsigned level; + +#ifdef CONFIG_SMP + unsigned long value; + + /* + * Disable TLB flush filter by setting HWCR.FFDIS on K8 + * bit 6 of msr C001_0015 + * + * Errata 63 for SH-B3 steppings + * Errata 122 for all steppings (F+ have it disabled by default) + */ + if (c->x86 == 15) { + rdmsrl(MSR_K8_HWCR, value); + value |= 1 << 6; + wrmsrl(MSR_K8_HWCR, value); + } +#endif + + /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; + 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ + clear_cpu_cap(c, 0*32+31); + + /* On C+ stepping K8 rep microcode works well for copy/memset */ + level = cpuid_eax(1); + if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) || + level >= 0x0f58)) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + if (c->x86 == 0x10 || c->x86 == 0x11) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + + /* Enable workaround for FXSAVE leak */ + if (c->x86 >= 6) + set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK); + + level = get_model_name(c); + if (!level) { + switch (c->x86) { + case 15: + /* Should distinguish Models here, but this is only + a fallback anyways. */ + strcpy(c->x86_model_id, "Hammer"); + break; + } + } + display_cacheinfo(c); + + /* Multi core CPU? */ + if (c->extended_cpuid_level >= 0x80000008) + amd_detect_cmp(c); + + if (c->extended_cpuid_level >= 0x80000006 && + (cpuid_edx(0x80000006) & 0xf000)) + num_cache_leaves = 4; + else + num_cache_leaves = 3; + + if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x11) + set_cpu_cap(c, X86_FEATURE_K8); + + /* MFENCE stops RDTSC speculation */ + set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); + + if (c->x86 == 0x10) + fam10h_check_enable_mmcfg(); + + if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { + unsigned long long tseg; + + /* + * Split up direct mapping around the TSEG SMM area. + * Don't do it for gbpages because there seems very little + * benefit in doing so. + */ + if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg) && + (tseg >> PMD_SHIFT) < + (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT))) + set_memory_4k((unsigned long)__va(tseg), 1); + } +} + +static struct cpu_dev amd_cpu_dev __cpuinitdata = { + .c_vendor = "AMD", + .c_ident = { "AuthenticAMD" }, + .c_early_init = early_init_amd, + .c_init = init_amd, +}; + +cpu_vendor_dev_register(X86_VENDOR_AMD, &amd_cpu_dev); + diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index 170d2f5523b..1b1c56bb338 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -59,8 +59,12 @@ static void __init check_fpu(void) return; } -/* trap_init() enabled FXSR and company _before_ testing for FP problems here. */ - /* Test for the divl bug.. */ + /* + * trap_init() enabled FXSR and company _before_ testing for FP + * problems here. + * + * Test for the divl bug.. + */ __asm__("fninit\n\t" "fldl %1\n\t" "fdivl %2\n\t" @@ -108,10 +112,15 @@ static void __init check_popad(void) "movl $12345678,%%eax; movl $0,%%edi; pusha; popa; movl (%%edx,%%edi),%%ecx " : "=&a" (res) : "d" (inp) - : "ecx", "edi" ); - /* If this fails, it means that any user program may lock the CPU hard. Too bad. */ - if (res != 12345678) printk( "Buggy.\n" ); - else printk( "OK.\n" ); + : "ecx", "edi"); + /* + * If this fails, it means that any user program may lock the + * CPU hard. Too bad. + */ + if (res != 12345678) + printk("Buggy.\n"); + else + printk("OK.\n"); #endif } @@ -137,7 +146,8 @@ static void __init check_config(void) * i486+ only features! (WP works in supervisor mode and the * new "invlpg" and "bswap" instructions) */ -#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_BSWAP) +#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || \ + defined(CONFIG_X86_BSWAP) if (boot_cpu_data.x86 == 3) panic("Kernel requires i486+ for 'invlpg' and other features"); #endif @@ -170,6 +180,7 @@ void __init check_bugs(void) check_fpu(); check_hlt(); check_popad(); - init_utsname()->machine[1] = '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86); + init_utsname()->machine[1] = + '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86); alternative_instructions(); } diff --git a/arch/x86/kernel/bugs_64.c b/arch/x86/kernel/cpu/bugs_64.c index 9a3ed0649d4..9a3ed0649d4 100644 --- a/arch/x86/kernel/bugs_64.c +++ b/arch/x86/kernel/cpu/bugs_64.c diff --git a/arch/x86/kernel/cpu/centaur_64.c b/arch/x86/kernel/cpu/centaur_64.c new file mode 100644 index 00000000000..13526fd5cce --- /dev/null +++ b/arch/x86/kernel/cpu/centaur_64.c @@ -0,0 +1,43 @@ +#include <linux/init.h> +#include <linux/smp.h> + +#include <asm/cpufeature.h> +#include <asm/processor.h> + +#include "cpu.h" + +static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) +{ + if (c->x86 == 0x6 && c->x86_model >= 0xf) + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); +} + +static void __cpuinit init_centaur(struct cpuinfo_x86 *c) +{ + /* Cache sizes */ + unsigned n; + + n = c->extended_cpuid_level; + if (n >= 0x80000008) { + unsigned eax = cpuid_eax(0x80000008); + c->x86_virt_bits = (eax >> 8) & 0xff; + c->x86_phys_bits = eax & 0xff; + } + + if (c->x86 == 0x6 && c->x86_model >= 0xf) { + c->x86_cache_alignment = c->x86_clflush_size * 2; + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + } + set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); +} + +static struct cpu_dev centaur_cpu_dev __cpuinitdata = { + .c_vendor = "Centaur", + .c_ident = { "CentaurHauls" }, + .c_early_init = early_init_centaur, + .c_init = init_centaur, +}; + +cpu_vendor_dev_register(X86_VENDOR_CENTAUR, ¢aur_cpu_dev); + diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h index 783691b2a73..4d894e8565f 100644 --- a/arch/x86/kernel/cpu/cpu.h +++ b/arch/x86/kernel/cpu/cpu.h @@ -1,3 +1,6 @@ +#ifndef ARCH_X86_CPU_H + +#define ARCH_X86_CPU_H struct cpu_model_info { int vendor; @@ -36,3 +39,5 @@ extern struct cpu_vendor_dev __x86cpuvendor_start[], __x86cpuvendor_end[]; extern int get_model_name(struct cpuinfo_x86 *c); extern void display_cacheinfo(struct cpuinfo_x86 *c); + +#endif diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c index f03e9153618..965ea52767a 100644 --- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c +++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c @@ -26,9 +26,10 @@ #define NFORCE2_SAFE_DISTANCE 50 /* Delay in ms between FSB changes */ -//#define NFORCE2_DELAY 10 +/* #define NFORCE2_DELAY 10 */ -/* nforce2_chipset: +/* + * nforce2_chipset: * FSB is changed using the chipset */ static struct pci_dev *nforce2_chipset_dev; @@ -36,13 +37,13 @@ static struct pci_dev *nforce2_chipset_dev; /* fid: * multiplier * 10 */ -static int fid = 0; +static int fid; /* min_fsb, max_fsb: * minimum and maximum FSB (= FSB at boot time) */ -static int min_fsb = 0; -static int max_fsb = 0; +static int min_fsb; +static int max_fsb; MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>"); MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver"); @@ -53,7 +54,7 @@ module_param(min_fsb, int, 0444); MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)"); MODULE_PARM_DESC(min_fsb, - "Minimum FSB to use, if not defined: current FSB - 50"); + "Minimum FSB to use, if not defined: current FSB - 50"); #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg) @@ -139,7 +140,7 @@ static unsigned int nforce2_fsb_read(int bootfsb) /* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */ nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, - 0x01EF,PCI_ANY_ID,PCI_ANY_ID,NULL); + 0x01EF, PCI_ANY_ID, PCI_ANY_ID, NULL); if (!nforce2_sub5) return 0; @@ -147,13 +148,13 @@ static unsigned int nforce2_fsb_read(int bootfsb) fsb /= 1000000; /* Check if PLL register is already set */ - pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp); + pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp); - if(bootfsb || !temp) + if (bootfsb || !temp) return fsb; - + /* Use PLL register FSB value */ - pci_read_config_dword(nforce2_chipset_dev,NFORCE2_PLLREG, &temp); + pci_read_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, &temp); fsb = nforce2_calc_fsb(temp); return fsb; @@ -184,7 +185,7 @@ static int nforce2_set_fsb(unsigned int fsb) } /* First write? Then set actual value */ - pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp); + pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp); if (!temp) { pll = nforce2_calc_pll(tfsb); @@ -210,7 +211,8 @@ static int nforce2_set_fsb(unsigned int fsb) tfsb--; /* Calculate the PLL reg. value */ - if ((pll = nforce2_calc_pll(tfsb)) == -1) + pll = nforce2_calc_pll(tfsb); + if (pll == -1) return -EINVAL; nforce2_write_pll(pll); @@ -249,7 +251,7 @@ static unsigned int nforce2_get(unsigned int cpu) static int nforce2_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { -// unsigned long flags; +/* unsigned long flags; */ struct cpufreq_freqs freqs; unsigned int target_fsb; @@ -271,17 +273,17 @@ static int nforce2_target(struct cpufreq_policy *policy, cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); /* Disable IRQs */ - //local_irq_save(flags); + /* local_irq_save(flags); */ if (nforce2_set_fsb(target_fsb) < 0) printk(KERN_ERR "cpufreq: Changing FSB to %d failed\n", - target_fsb); + target_fsb); else dprintk("Changed FSB successfully to %d\n", - target_fsb); + target_fsb); /* Enable IRQs */ - //local_irq_restore(flags); + /* local_irq_restore(flags); */ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); @@ -302,8 +304,8 @@ static int nforce2_verify(struct cpufreq_policy *policy) policy->max = (fsb_pol_max + 1) * fid * 100; cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); + policy->cpuinfo.min_freq, + policy->cpuinfo.max_freq); return 0; } @@ -347,7 +349,7 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy) /* Set maximum FSB to FSB at boot time */ max_fsb = nforce2_fsb_read(1); - if(!max_fsb) + if (!max_fsb) return -EIO; if (!min_fsb) diff --git a/arch/x86/kernel/cpu/intel_64.c b/arch/x86/kernel/cpu/intel_64.c new file mode 100644 index 00000000000..fcb1cc9d75c --- /dev/null +++ b/arch/x86/kernel/cpu/intel_64.c @@ -0,0 +1,103 @@ +#include <linux/init.h> +#include <linux/smp.h> +#include <asm/processor.h> +#include <asm/ptrace.h> +#include <asm/topology.h> +#include <asm/numa_64.h> + +#include "cpu.h" + +static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) +{ + if ((c->x86 == 0xf && c->x86_model >= 0x03) || + (c->x86 == 0x6 && c->x86_model >= 0x0e)) + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); +} + +/* + * find out the number of processor cores on the die + */ +static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) +{ + unsigned int eax, t; + + if (c->cpuid_level < 4) + return 1; + + cpuid_count(4, 0, &eax, &t, &t, &t); + + if (eax & 0x1f) + return ((eax >> 26) + 1); + else + return 1; +} + +static void __cpuinit srat_detect_node(void) +{ +#ifdef CONFIG_NUMA + unsigned node; + int cpu = smp_processor_id(); + int apicid = hard_smp_processor_id(); + + /* Don't do the funky fallback heuristics the AMD version employs + for now. */ + node = apicid_to_node[apicid]; + if (node == NUMA_NO_NODE || !node_online(node)) + node = first_node(node_online_map); + numa_set_node(cpu, node); + + printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); +#endif +} + +static void __cpuinit init_intel(struct cpuinfo_x86 *c) +{ + /* Cache sizes */ + unsigned n; + + init_intel_cacheinfo(c); + if (c->cpuid_level > 9) { + unsigned eax = cpuid_eax(10); + /* Check for version and the number of counters */ + if ((eax & 0xff) && (((eax>>8) & 0xff) > 1)) + set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON); + } + + if (cpu_has_ds) { + unsigned int l1, l2; + rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); + if (!(l1 & (1<<11))) + set_cpu_cap(c, X86_FEATURE_BTS); + if (!(l1 & (1<<12))) + set_cpu_cap(c, X86_FEATURE_PEBS); + } + + + if (cpu_has_bts) + ds_init_intel(c); + + n = c->extended_cpuid_level; + if (n >= 0x80000008) { + unsigned eax = cpuid_eax(0x80000008); + c->x86_virt_bits = (eax >> 8) & 0xff; + c->x86_phys_bits = eax & 0xff; + } + + if (c->x86 == 15) + c->x86_cache_alignment = c->x86_clflush_size * 2; + if (c->x86 == 6) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); + c->x86_max_cores = intel_num_cpu_cores(c); + + srat_detect_node(); +} + +static struct cpu_dev intel_cpu_dev __cpuinitdata = { + .c_vendor = "Intel", + .c_ident = { "GenuineIntel" }, + .c_early_init = early_init_intel, + .c_init = init_intel, +}; +cpu_vendor_dev_register(X86_VENDOR_INTEL, &intel_cpu_dev); + diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 26d615dcb14..2c8afafa18e 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -62,6 +62,7 @@ static struct _cache_table cache_table[] __cpuinitdata = { 0x4b, LVL_3, 8192 }, /* 16-way set assoc, 64 byte line size */ { 0x4c, LVL_3, 12288 }, /* 12-way set assoc, 64 byte line size */ { 0x4d, LVL_3, 16384 }, /* 16-way set assoc, 64 byte line size */ + { 0x4e, LVL_2, 6144 }, /* 24-way set assoc, 64 byte line size */ { 0x60, LVL_1_DATA, 16 }, /* 8-way set assoc, sectored cache, 64 byte line size */ { 0x66, LVL_1_DATA, 8 }, /* 4-way set assoc, sectored cache, 64 byte line size */ { 0x67, LVL_1_DATA, 16 }, /* 4-way set assoc, sectored cache, 64 byte line size */ diff --git a/arch/x86/kernel/cpu/mcheck/k7.c b/arch/x86/kernel/cpu/mcheck/k7.c index e633c9c2b76..f390c9f6635 100644 --- a/arch/x86/kernel/cpu/mcheck/k7.c +++ b/arch/x86/kernel/cpu/mcheck/k7.c @@ -9,23 +9,23 @@ #include <linux/interrupt.h> #include <linux/smp.h> -#include <asm/processor.h> +#include <asm/processor.h> #include <asm/system.h> #include <asm/msr.h> #include "mce.h" /* Machine Check Handler For AMD Athlon/Duron */ -static void k7_machine_check(struct pt_regs * regs, long error_code) +static void k7_machine_check(struct pt_regs *regs, long error_code) { - int recover=1; + int recover = 1; u32 alow, ahigh, high, low; u32 mcgstl, mcgsth; int i; - rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth); + rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth); if (mcgstl & (1<<0)) /* Recoverable ? */ - recover=0; + recover = 0; printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n", smp_processor_id(), mcgsth, mcgstl); @@ -60,12 +60,12 @@ static void k7_machine_check(struct pt_regs * regs, long error_code) } if (recover&2) - panic ("CPU context corrupt"); + panic("CPU context corrupt"); if (recover&1) - panic ("Unable to continue"); - printk (KERN_EMERG "Attempting to continue.\n"); + panic("Unable to continue"); + printk(KERN_EMERG "Attempting to continue.\n"); mcgstl &= ~(1<<2); - wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth); + wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth); } @@ -81,25 +81,25 @@ void amd_mcheck_init(struct cpuinfo_x86 *c) machine_check_vector = k7_machine_check; wmb(); - printk (KERN_INFO "Intel machine check architecture supported.\n"); - rdmsr (MSR_IA32_MCG_CAP, l, h); + printk(KERN_INFO "Intel machine check architecture supported.\n"); + rdmsr(MSR_IA32_MCG_CAP, l, h); if (l & (1<<8)) /* Control register present ? */ - wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); + wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); nr_mce_banks = l & 0xff; /* Clear status for MC index 0 separately, we don't touch CTL, * as some K7 Athlons cause spurious MCEs when its enabled. */ if (boot_cpu_data.x86 == 6) { - wrmsr (MSR_IA32_MC0_STATUS, 0x0, 0x0); + wrmsr(MSR_IA32_MC0_STATUS, 0x0, 0x0); i = 1; } else i = 0; - for (; i<nr_mce_banks; i++) { - wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); - wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); + for (; i < nr_mce_banks; i++) { + wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); + wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); } - set_in_cr4 (X86_CR4_MCE); - printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", + set_in_cr4(X86_CR4_MCE); + printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", smp_processor_id()); } diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index e07e8c068ae..501ca1cea27 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -31,7 +31,7 @@ #include <asm/idle.h> #define MISC_MCELOG_MINOR 227 -#define NR_BANKS 6 +#define NR_SYSFS_BANKS 6 atomic_t mce_entry; @@ -46,7 +46,7 @@ static int mce_dont_init; */ static int tolerant = 1; static int banks; -static unsigned long bank[NR_BANKS] = { [0 ... NR_BANKS-1] = ~0UL }; +static unsigned long bank[NR_SYSFS_BANKS] = { [0 ... NR_SYSFS_BANKS-1] = ~0UL }; static unsigned long notify_user; static int rip_msr; static int mce_bootlog = -1; @@ -209,7 +209,7 @@ void do_machine_check(struct pt_regs * regs, long error_code) barrier(); for (i = 0; i < banks; i++) { - if (!bank[i]) + if (i < NR_SYSFS_BANKS && !bank[i]) continue; m.misc = 0; @@ -444,9 +444,10 @@ static void mce_init(void *dummy) rdmsrl(MSR_IA32_MCG_CAP, cap); banks = cap & 0xff; - if (banks > NR_BANKS) { - printk(KERN_INFO "MCE: warning: using only %d banks\n", banks); - banks = NR_BANKS; + if (banks > MCE_EXTENDED_BANK) { + banks = MCE_EXTENDED_BANK; + printk(KERN_INFO "MCE: warning: using only %d banks\n", + MCE_EXTENDED_BANK); } /* Use accurate RIP reporting if available. */ if ((cap & (1<<9)) && ((cap >> 16) & 0xff) >= 9) @@ -462,7 +463,11 @@ static void mce_init(void *dummy) wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); for (i = 0; i < banks; i++) { - wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]); + if (i < NR_SYSFS_BANKS) + wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]); + else + wrmsrl(MSR_IA32_MC0_CTL+4*i, ~0UL); + wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0); } } @@ -766,7 +771,10 @@ DEFINE_PER_CPU(struct sys_device, device_mce); } \ static SYSDEV_ATTR(name, 0644, show_ ## name, set_ ## name); -/* TBD should generate these dynamically based on number of available banks */ +/* + * TBD should generate these dynamically based on number of available banks. + * Have only 6 contol banks in /sysfs until then. + */ ACCESSOR(bank0ctl,bank[0],mce_restart()) ACCESSOR(bank1ctl,bank[1],mce_restart()) ACCESSOR(bank2ctl,bank[2],mce_restart()) diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c index cb03345554a..eef001ad3bd 100644 --- a/arch/x86/kernel/cpu/mcheck/p4.c +++ b/arch/x86/kernel/cpu/mcheck/p4.c @@ -8,7 +8,7 @@ #include <linux/interrupt.h> #include <linux/smp.h> -#include <asm/processor.h> +#include <asm/processor.h> #include <asm/system.h> #include <asm/msr.h> #include <asm/apic.h> @@ -32,12 +32,12 @@ struct intel_mce_extended_msrs { /* u32 *reserved[]; */ }; -static int mce_num_extended_msrs = 0; +static int mce_num_extended_msrs; #ifdef CONFIG_X86_MCE_P4THERMAL static void unexpected_thermal_interrupt(struct pt_regs *regs) -{ +{ printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n", smp_processor_id()); add_taint(TAINT_MACHINE_CHECK); @@ -83,7 +83,7 @@ static void intel_init_thermal(struct cpuinfo_x86 *c) * be some SMM goo which handles it, so we can't even put a handler * since it might be delivered via SMI already -zwanem. */ - rdmsr (MSR_IA32_MISC_ENABLE, l, h); + rdmsr(MSR_IA32_MISC_ENABLE, l, h); h = apic_read(APIC_LVTTHMR); if ((l & (1<<3)) && (h & APIC_DM_SMI)) { printk(KERN_DEBUG "CPU%d: Thermal monitoring handled by SMI\n", @@ -91,7 +91,7 @@ static void intel_init_thermal(struct cpuinfo_x86 *c) return; /* -EBUSY */ } - /* check whether a vector already exists, temporarily masked? */ + /* check whether a vector already exists, temporarily masked? */ if (h & APIC_VECTOR_MASK) { printk(KERN_DEBUG "CPU%d: Thermal LVT vector (%#x) already " "installed\n", @@ -104,18 +104,18 @@ static void intel_init_thermal(struct cpuinfo_x86 *c) h |= (APIC_DM_FIXED | APIC_LVT_MASKED); /* we'll mask till we're ready */ apic_write_around(APIC_LVTTHMR, h); - rdmsr (MSR_IA32_THERM_INTERRUPT, l, h); - wrmsr (MSR_IA32_THERM_INTERRUPT, l | 0x03 , h); + rdmsr(MSR_IA32_THERM_INTERRUPT, l, h); + wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03 , h); /* ok we're good to go... */ vendor_thermal_interrupt = intel_thermal_interrupt; - - rdmsr (MSR_IA32_MISC_ENABLE, l, h); - wrmsr (MSR_IA32_MISC_ENABLE, l | (1<<3), h); - l = apic_read (APIC_LVTTHMR); - apic_write_around (APIC_LVTTHMR, l & ~APIC_LVT_MASKED); - printk (KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu); + rdmsr(MSR_IA32_MISC_ENABLE, l, h); + wrmsr(MSR_IA32_MISC_ENABLE, l | (1<<3), h); + + l = apic_read(APIC_LVTTHMR); + apic_write_around(APIC_LVTTHMR, l & ~APIC_LVT_MASKED); + printk(KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu); /* enable thermal throttle processing */ atomic_set(&therm_throt_en, 1); @@ -129,28 +129,28 @@ static inline void intel_get_extended_msrs(struct intel_mce_extended_msrs *r) { u32 h; - rdmsr (MSR_IA32_MCG_EAX, r->eax, h); - rdmsr (MSR_IA32_MCG_EBX, r->ebx, h); - rdmsr (MSR_IA32_MCG_ECX, r->ecx, h); - rdmsr (MSR_IA32_MCG_EDX, r->edx, h); - rdmsr (MSR_IA32_MCG_ESI, r->esi, h); - rdmsr (MSR_IA32_MCG_EDI, r->edi, h); - rdmsr (MSR_IA32_MCG_EBP, r->ebp, h); - rdmsr (MSR_IA32_MCG_ESP, r->esp, h); - rdmsr (MSR_IA32_MCG_EFLAGS, r->eflags, h); - rdmsr (MSR_IA32_MCG_EIP, r->eip, h); + rdmsr(MSR_IA32_MCG_EAX, r->eax, h); + rdmsr(MSR_IA32_MCG_EBX, r->ebx, h); + rdmsr(MSR_IA32_MCG_ECX, r->ecx, h); + rdmsr(MSR_IA32_MCG_EDX, r->edx, h); + rdmsr(MSR_IA32_MCG_ESI, r->esi, h); + rdmsr(MSR_IA32_MCG_EDI, r->edi, h); + rdmsr(MSR_IA32_MCG_EBP, r->ebp, h); + rdmsr(MSR_IA32_MCG_ESP, r->esp, h); + rdmsr(MSR_IA32_MCG_EFLAGS, r->eflags, h); + rdmsr(MSR_IA32_MCG_EIP, r->eip, h); } -static void intel_machine_check(struct pt_regs * regs, long error_code) +static void intel_machine_check(struct pt_regs *regs, long error_code) { - int recover=1; + int recover = 1; u32 alow, ahigh, high, low; u32 mcgstl, mcgsth; int i; - rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth); + rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth); if (mcgstl & (1<<0)) /* Recoverable ? */ - recover=0; + recover = 0; printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n", smp_processor_id(), mcgsth, mcgstl); @@ -191,20 +191,20 @@ static void intel_machine_check(struct pt_regs * regs, long error_code) } if (recover & 2) - panic ("CPU context corrupt"); + panic("CPU context corrupt"); if (recover & 1) - panic ("Unable to continue"); + panic("Unable to continue"); printk(KERN_EMERG "Attempting to continue.\n"); - /* - * Do not clear the MSR_IA32_MCi_STATUS if the error is not + /* + * Do not clear the MSR_IA32_MCi_STATUS if the error is not * recoverable/continuable.This will allow BIOS to look at the MSRs * for errors if the OS could not log the error. */ - for (i=0; i<nr_mce_banks; i++) { + for (i = 0; i < nr_mce_banks; i++) { u32 msr; msr = MSR_IA32_MC0_STATUS+i*4; - rdmsr (msr, low, high); + rdmsr(msr, low, high); if (high&(1<<31)) { /* Clear it */ wrmsr(msr, 0UL, 0UL); @@ -214,7 +214,7 @@ static void intel_machine_check(struct pt_regs * regs, long error_code) } } mcgstl &= ~(1<<2); - wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth); + wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth); } @@ -222,30 +222,30 @@ void intel_p4_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; int i; - + machine_check_vector = intel_machine_check; wmb(); - printk (KERN_INFO "Intel machine check architecture supported.\n"); - rdmsr (MSR_IA32_MCG_CAP, l, h); + printk(KERN_INFO "Intel machine check architecture supported.\n"); + rdmsr(MSR_IA32_MCG_CAP, l, h); if (l & (1<<8)) /* Control register present ? */ - wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); + wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); nr_mce_banks = l & 0xff; - for (i=0; i<nr_mce_banks; i++) { - wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); - wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); + for (i = 0; i < nr_mce_banks; i++) { + wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); + wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); } - set_in_cr4 (X86_CR4_MCE); - printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", + set_in_cr4(X86_CR4_MCE); + printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", smp_processor_id()); /* Check for P4/Xeon extended MCE MSRs */ - rdmsr (MSR_IA32_MCG_CAP, l, h); + rdmsr(MSR_IA32_MCG_CAP, l, h); if (l & (1<<9)) {/* MCG_EXT_P */ mce_num_extended_msrs = (l >> 16) & 0xff; - printk (KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)" + printk(KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)" " available\n", smp_processor_id(), mce_num_extended_msrs); diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index 9f51e1ea9e8..84fd9f2a28f 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -98,17 +98,6 @@ static void __init nvidia_bugs(int num, int slot, int func) } -static void __init ati_bugs(int num, int slot, int func) -{ -#ifdef CONFIG_X86_IO_APIC - if (timer_over_8254 == 1) { - timer_over_8254 = 0; - printk(KERN_INFO - "ATI board detected. Disabling timer routing over 8254.\n"); - } -#endif -} - #define QFLAG_APPLY_ONCE 0x1 #define QFLAG_APPLIED 0x2 #define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED) @@ -126,8 +115,6 @@ static struct chipset early_qrk[] __initdata = { PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs }, { PCI_VENDOR_ID_VIA, PCI_ANY_ID, PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs }, - { PCI_VENDOR_ID_ATI, PCI_ANY_ID, - PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, ati_bugs }, { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB, PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config }, {} diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 556a8df522a..5cf0aa993f4 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -420,7 +420,6 @@ END(\label) PTREGSCALL stub_clone, sys_clone, %r8 PTREGSCALL stub_fork, sys_fork, %rdi PTREGSCALL stub_vfork, sys_vfork, %rdi - PTREGSCALL stub_rt_sigsuspend, sys_rt_sigsuspend, %rdx PTREGSCALL stub_sigaltstack, sys_sigaltstack, %rdx PTREGSCALL stub_iopl, sys_iopl, %rsi @@ -1120,10 +1119,6 @@ ENTRY(coprocessor_segment_overrun) zeroentry do_coprocessor_segment_overrun END(coprocessor_segment_overrun) -ENTRY(reserved) - zeroentry do_reserved -END(reserved) - /* runs on exception stack */ ENTRY(double_fault) XCPT_FRAME diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index b817974ef94..263b9d14753 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -18,6 +18,7 @@ #include <asm/page.h> #include <asm/msr.h> #include <asm/cache.h> +#include <asm/processor-flags.h> #ifdef CONFIG_PARAVIRT #include <asm/asm-offsets.h> @@ -154,9 +155,7 @@ ENTRY(secondary_startup_64) */ /* Enable PAE mode and PGE */ - xorq %rax, %rax - btsq $5, %rax - btsq $7, %rax + movl $(X86_CR4_PAE | X86_CR4_PGE), %eax movq %rax, %cr4 /* Setup early boot stage 4 level pagetables. */ @@ -184,14 +183,10 @@ ENTRY(secondary_startup_64) 1: wrmsr /* Make changes effective */ /* Setup cr0 */ -#define CR0_PM 1 /* protected mode */ -#define CR0_MP (1<<1) -#define CR0_ET (1<<4) -#define CR0_NE (1<<5) -#define CR0_WP (1<<16) -#define CR0_AM (1<<18) -#define CR0_PAGING (1<<31) - movl $CR0_PM|CR0_MP|CR0_ET|CR0_NE|CR0_WP|CR0_AM|CR0_PAGING,%eax +#define CR0_STATE (X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | \ + X86_CR0_NE | X86_CR0_WP | X86_CR0_AM | \ + X86_CR0_PG) + movl $CR0_STATE, %eax /* Make changes effective */ movq %rax, %cr0 @@ -327,11 +322,11 @@ early_idt_ripmsg: ENTRY(name) /* Automate the creation of 1 to 1 mapping pmd entries */ -#define PMDS(START, PERM, COUNT) \ - i = 0 ; \ - .rept (COUNT) ; \ - .quad (START) + (i << 21) + (PERM) ; \ - i = i + 1 ; \ +#define PMDS(START, PERM, COUNT) \ + i = 0 ; \ + .rept (COUNT) ; \ + .quad (START) + (i << PMD_SHIFT) + (PERM) ; \ + i = i + 1 ; \ .endr /* diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 9b5cfcdfc42..ea230ec6905 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -17,7 +17,7 @@ /* FSEC = 10^-15 NSEC = 10^-9 */ -#define FSEC_PER_NSEC 1000000 +#define FSEC_PER_NSEC 1000000L /* * HPET address is set in acpi/boot.c, when an ACPI entry exists @@ -206,20 +206,19 @@ static void hpet_enable_legacy_int(void) static void hpet_legacy_clockevent_register(void) { - uint64_t hpet_freq; - /* Start HPET legacy interrupts */ hpet_enable_legacy_int(); /* - * The period is a femto seconds value. We need to calculate the - * scaled math multiplication factor for nanosecond to hpet tick - * conversion. + * The mult factor is defined as (include/linux/clockchips.h) + * mult/2^shift = cyc/ns (in contrast to ns/cyc in clocksource.h) + * hpet_period is in units of femtoseconds (per cycle), so + * mult/2^shift = cyc/ns = 10^6/hpet_period + * mult = (10^6 * 2^shift)/hpet_period + * mult = (FSEC_PER_NSEC << hpet_clockevent.shift)/hpet_period */ - hpet_freq = 1000000000000000ULL; - do_div(hpet_freq, hpet_period); - hpet_clockevent.mult = div_sc((unsigned long) hpet_freq, - NSEC_PER_SEC, hpet_clockevent.shift); + hpet_clockevent.mult = div_sc((unsigned long) FSEC_PER_NSEC, + hpet_period, hpet_clockevent.shift); /* Calculate the min / max delta */ hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, &hpet_clockevent); @@ -324,7 +323,7 @@ static struct clocksource clocksource_hpet = { static int hpet_clocksource_register(void) { - u64 tmp, start, now; + u64 start, now; cycle_t t1; /* Start the counter */ @@ -351,21 +350,15 @@ static int hpet_clocksource_register(void) return -ENODEV; } - /* Initialize and register HPET clocksource - * - * hpet period is in femto seconds per cycle - * so we need to convert this to ns/cyc units - * approximated by mult/2^shift - * - * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift - * fsec/cyc * 1ns/1000000fsec * 2^shift = mult - * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult - * (fsec/cyc << shift)/1000000 = mult - * (hpet_period << shift)/FSEC_PER_NSEC = mult + /* + * The definition of mult is (include/linux/clocksource.h) + * mult/2^shift = ns/cyc and hpet_period is in units of fsec/cyc + * so we first need to convert hpet_period to ns/cyc units: + * mult/2^shift = ns/cyc = hpet_period/10^6 + * mult = (hpet_period * 2^shift)/10^6 + * mult = (hpet_period << shift)/FSEC_PER_NSEC */ - tmp = (u64)hpet_period << HPET_SHIFT; - do_div(tmp, FSEC_PER_NSEC); - clocksource_hpet.mult = (u32)tmp; + clocksource_hpet.mult = div_sc(hpet_period, FSEC_PER_NSEC, HPET_SHIFT); clocksource_register(&clocksource_hpet); diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259.c index fe631967d62..7a0fda8f01b 100644 --- a/arch/x86/kernel/i8259_32.c +++ b/arch/x86/kernel/i8259.c @@ -1,8 +1,10 @@ +#include <linux/linkage.h> #include <linux/errno.h> #include <linux/signal.h> #include <linux/sched.h> #include <linux/ioport.h> #include <linux/interrupt.h> +#include <linux/timex.h> #include <linux/slab.h> #include <linux/random.h> #include <linux/init.h> @@ -10,10 +12,12 @@ #include <linux/sysdev.h> #include <linux/bitops.h> +#include <asm/acpi.h> #include <asm/atomic.h> #include <asm/system.h> #include <asm/io.h> #include <asm/timer.h> +#include <asm/hw_irq.h> #include <asm/pgtable.h> #include <asm/delay.h> #include <asm/desc.h> @@ -32,7 +36,7 @@ static int i8259A_auto_eoi; DEFINE_SPINLOCK(i8259A_lock); static void mask_and_ack_8259A(unsigned int); -static struct irq_chip i8259A_chip = { +struct irq_chip i8259A_chip = { .name = "XT-PIC", .mask = disable_8259A_irq, .disable = disable_8259A_irq, @@ -125,14 +129,14 @@ static inline int i8259A_irq_real(unsigned int irq) int irqmask = 1<<irq; if (irq < 8) { - outb(0x0B,PIC_MASTER_CMD); /* ISR register */ + outb(0x0B, PIC_MASTER_CMD); /* ISR register */ value = inb(PIC_MASTER_CMD) & irqmask; - outb(0x0A,PIC_MASTER_CMD); /* back to the IRR register */ + outb(0x0A, PIC_MASTER_CMD); /* back to the IRR register */ return value; } - outb(0x0B,PIC_SLAVE_CMD); /* ISR register */ + outb(0x0B, PIC_SLAVE_CMD); /* ISR register */ value = inb(PIC_SLAVE_CMD) & (irqmask >> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ + outb(0x0A, PIC_SLAVE_CMD); /* back to the IRR register */ return value; } @@ -171,12 +175,14 @@ handle_real_irq: if (irq & 8) { inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ outb(cached_slave_mask, PIC_SLAVE_IMR); - outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ + /* 'Specific EOI' to slave */ + outb(0x60+(irq&7), PIC_SLAVE_CMD); + /* 'Specific EOI' to master-IRQ2 */ + outb(0x60+PIC_CASCADE_IR, PIC_MASTER_CMD); } else { inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ outb(cached_master_mask, PIC_MASTER_IMR); - outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ + outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */ } spin_unlock_irqrestore(&i8259A_lock, flags); return; @@ -199,7 +205,8 @@ spurious_8259A_irq: * lets ACK and report it. [once per IRQ] */ if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); + printk(KERN_DEBUG + "spurious 8259A interrupt: IRQ%d.\n", irq); spurious_irq_mask |= irqmask; } atomic_inc(&irq_err_count); @@ -290,17 +297,34 @@ void init_8259A(int auto_eoi) * outb_pic - this has to work on a wide range of PC hardware. */ outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ +#ifndef CONFIG_X86_64 outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ +#else /* CONFIG_X86_64 */ + /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ + outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); + /* 8259A-1 (the master) has a slave on IR2 */ + outb_pic(0x04, PIC_MASTER_IMR); +#endif /* CONFIG_X86_64 */ if (auto_eoi) /* master does Auto EOI */ outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); else /* master expects normal EOI */ outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ +#ifndef CONFIG_X86_64 outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ +#else /* CONFIG_X86_64 */ + /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ + outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); + /* 8259A-2 is a slave on master's IR2 */ + outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); + /* (slave's support for AEOI in flat mode is to be investigated) */ + outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); + +#endif /* CONFIG_X86_64 */ if (auto_eoi) /* * In AEOI mode we just have to mask the interrupt @@ -317,93 +341,3 @@ void init_8259A(int auto_eoi) spin_unlock_irqrestore(&i8259A_lock, flags); } - -/* - * Note that on a 486, we don't want to do a SIGFPE on an irq13 - * as the irq is unreliable, and exception 16 works correctly - * (ie as explained in the intel literature). On a 386, you - * can't use exception 16 due to bad IBM design, so we have to - * rely on the less exact irq13. - * - * Careful.. Not only is IRQ13 unreliable, but it is also - * leads to races. IBM designers who came up with it should - * be shot. - */ - - -static irqreturn_t math_error_irq(int cpl, void *dev_id) -{ - extern void math_error(void __user *); - outb(0,0xF0); - if (ignore_fpu_irq || !boot_cpu_data.hard_math) - return IRQ_NONE; - math_error((void __user *)get_irq_regs()->ip); - return IRQ_HANDLED; -} - -/* - * New motherboards sometimes make IRQ 13 be a PCI interrupt, - * so allow interrupt sharing. - */ -static struct irqaction fpu_irq = { - .handler = math_error_irq, - .mask = CPU_MASK_NONE, - .name = "fpu", -}; - -void __init init_ISA_irqs (void) -{ - int i; - -#ifdef CONFIG_X86_LOCAL_APIC - init_bsp_APIC(); -#endif - init_8259A(0); - - /* - * 16 old-style INTA-cycle interrupts: - */ - for (i = 0; i < 16; i++) { - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } -} - -/* Overridden in paravirt.c */ -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -void __init native_init_IRQ(void) -{ - int i; - - /* all the set up before the call gates are initialised */ - pre_intr_init_hook(); - - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { - int vector = FIRST_EXTERNAL_VECTOR + i; - if (i >= NR_IRQS) - break; - /* SYSCALL_VECTOR was reserved in trap_init. */ - if (!test_bit(vector, used_vectors)) - set_intr_gate(vector, interrupt[i]); - } - - /* setup after call gates are initialised (usually add in - * the architecture specific gates) - */ - intr_init_hook(); - - /* - * External FPU? Set up irq13 if so, for - * original braindamaged IBM FERR coupling. - */ - if (boot_cpu_data.hard_math && !cpu_has_fpu) - setup_irq(FPU_IRQ, &fpu_irq); - - irq_ctx_init(smp_processor_id()); -} diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c deleted file mode 100644 index fa57a156850..00000000000 --- a/arch/x86/kernel/i8259_64.c +++ /dev/null @@ -1,512 +0,0 @@ -#include <linux/linkage.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/sysdev.h> -#include <linux/bitops.h> - -#include <asm/acpi.h> -#include <asm/atomic.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/hw_irq.h> -#include <asm/pgtable.h> -#include <asm/delay.h> -#include <asm/desc.h> -#include <asm/apic.h> -#include <asm/i8259.h> - -/* - * Common place to define all x86 IRQ vectors - * - * This builds up the IRQ handler stubs using some ugly macros in irq.h - * - * These macros create the low-level assembly IRQ routines that save - * register context and call do_IRQ(). do_IRQ() then does all the - * operations that are needed to keep the AT (or SMP IOAPIC) - * interrupt-controller happy. - */ - -#define BI(x,y) \ - BUILD_IRQ(x##y) - -#define BUILD_16_IRQS(x) \ - BI(x,0) BI(x,1) BI(x,2) BI(x,3) \ - BI(x,4) BI(x,5) BI(x,6) BI(x,7) \ - BI(x,8) BI(x,9) BI(x,a) BI(x,b) \ - BI(x,c) BI(x,d) BI(x,e) BI(x,f) - -/* - * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: - * (these are usually mapped to vectors 0x30-0x3f) - */ - -/* - * The IO-APIC gives us many more interrupt sources. Most of these - * are unused but an SMP system is supposed to have enough memory ... - * sometimes (mostly wrt. hw bugs) we get corrupted vectors all - * across the spectrum, so we really want to be prepared to get all - * of these. Plus, more powerful systems might have more than 64 - * IO-APIC registers. - * - * (these are usually mapped into the 0x30-0xff vector range) - */ - BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3) -BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7) -BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb) -BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf) - -#undef BUILD_16_IRQS -#undef BI - - -#define IRQ(x,y) \ - IRQ##x##y##_interrupt - -#define IRQLIST_16(x) \ - IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \ - IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \ - IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \ - IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f) - -/* for the irq vectors */ -static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = { - IRQLIST_16(0x2), IRQLIST_16(0x3), - IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7), - IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb), - IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf) -}; - -#undef IRQ -#undef IRQLIST_16 - -/* - * This is the 'legacy' 8259A Programmable Interrupt Controller, - * present in the majority of PC/AT boxes. - * plus some generic x86 specific things if generic specifics makes - * any sense at all. - * this file should become arch/i386/kernel/irq.c when the old irq.c - * moves to arch independent land - */ - -static int i8259A_auto_eoi; -DEFINE_SPINLOCK(i8259A_lock); -static void mask_and_ack_8259A(unsigned int); - -static struct irq_chip i8259A_chip = { - .name = "XT-PIC", - .mask = disable_8259A_irq, - .disable = disable_8259A_irq, - .unmask = enable_8259A_irq, - .mask_ack = mask_and_ack_8259A, -}; - -/* - * 8259A PIC functions to handle ISA devices: - */ - -/* - * This contains the irq mask for both 8259A irq controllers, - */ -unsigned int cached_irq_mask = 0xffff; - -/* - * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) - * boards the timer interrupt is not really connected to any IO-APIC pin, - * it's fed to the master 8259A's IR0 line only. - * - * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. - * this 'mixed mode' IRQ handling costs nothing because it's only used - * at IRQ setup time. - */ -unsigned long io_apic_irqs; - -void disable_8259A_irq(unsigned int irq) -{ - unsigned int mask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask |= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -void enable_8259A_irq(unsigned int irq) -{ - unsigned int mask = ~(1 << irq); - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask &= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -int i8259A_irq_pending(unsigned int irq) -{ - unsigned int mask = 1<<irq; - unsigned long flags; - int ret; - - spin_lock_irqsave(&i8259A_lock, flags); - if (irq < 8) - ret = inb(PIC_MASTER_CMD) & mask; - else - ret = inb(PIC_SLAVE_CMD) & (mask >> 8); - spin_unlock_irqrestore(&i8259A_lock, flags); - - return ret; -} - -void make_8259A_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - io_apic_irqs &= ~(1<<irq); - set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq, - "XT"); - enable_irq(irq); -} - -/* - * This function assumes to be called rarely. Switching between - * 8259A registers is slow. - * This has to be protected by the irq controller spinlock - * before being called. - */ -static inline int i8259A_irq_real(unsigned int irq) -{ - int value; - int irqmask = 1<<irq; - - if (irq < 8) { - outb(0x0B,PIC_MASTER_CMD); /* ISR register */ - value = inb(PIC_MASTER_CMD) & irqmask; - outb(0x0A,PIC_MASTER_CMD); /* back to the IRR register */ - return value; - } - outb(0x0B,PIC_SLAVE_CMD); /* ISR register */ - value = inb(PIC_SLAVE_CMD) & (irqmask >> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ - return value; -} - -/* - * Careful! The 8259A is a fragile beast, it pretty - * much _has_ to be done exactly like this (mask it - * first, _then_ send the EOI, and the order of EOI - * to the two 8259s is important! - */ -static void mask_and_ack_8259A(unsigned int irq) -{ - unsigned int irqmask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - /* - * Lightweight spurious IRQ detection. We do not want - * to overdo spurious IRQ handling - it's usually a sign - * of hardware problems, so we only do the checks we can - * do without slowing down good hardware unnecessarily. - * - * Note that IRQ7 and IRQ15 (the two spurious IRQs - * usually resulting from the 8259A-1|2 PICs) occur - * even if the IRQ is masked in the 8259A. Thus we - * can check spurious 8259A IRQs without doing the - * quite slow i8259A_irq_real() call for every IRQ. - * This does not cover 100% of spurious interrupts, - * but should be enough to warn the user that there - * is something bad going on ... - */ - if (cached_irq_mask & irqmask) - goto spurious_8259A_irq; - cached_irq_mask |= irqmask; - -handle_real_irq: - if (irq & 8) { - inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ - outb(cached_slave_mask, PIC_SLAVE_IMR); - /* 'Specific EOI' to slave */ - outb(0x60+(irq&7),PIC_SLAVE_CMD); - /* 'Specific EOI' to master-IRQ2 */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); - } else { - inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ - outb(cached_master_mask, PIC_MASTER_IMR); - /* 'Specific EOI' to master */ - outb(0x60+irq,PIC_MASTER_CMD); - } - spin_unlock_irqrestore(&i8259A_lock, flags); - return; - -spurious_8259A_irq: - /* - * this is the slow path - should happen rarely. - */ - if (i8259A_irq_real(irq)) - /* - * oops, the IRQ _is_ in service according to the - * 8259A - not spurious, go handle it. - */ - goto handle_real_irq; - - { - static int spurious_irq_mask; - /* - * At this point we can be sure the IRQ is spurious, - * lets ACK and report it. [once per IRQ] - */ - if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG - "spurious 8259A interrupt: IRQ%d.\n", irq); - spurious_irq_mask |= irqmask; - } - atomic_inc(&irq_err_count); - /* - * Theoretically we do not have to handle this IRQ, - * but in Linux this does not cause problems and is - * simpler for us. - */ - goto handle_real_irq; - } -} - -static char irq_trigger[2]; -/** - * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ - */ -static void restore_ELCR(char *trigger) -{ - outb(trigger[0], 0x4d0); - outb(trigger[1], 0x4d1); -} - -static void save_ELCR(char *trigger) -{ - /* IRQ 0,1,2,8,13 are marked as reserved */ - trigger[0] = inb(0x4d0) & 0xF8; - trigger[1] = inb(0x4d1) & 0xDE; -} - -static int i8259A_resume(struct sys_device *dev) -{ - init_8259A(i8259A_auto_eoi); - restore_ELCR(irq_trigger); - return 0; -} - -static int i8259A_suspend(struct sys_device *dev, pm_message_t state) -{ - save_ELCR(irq_trigger); - return 0; -} - -static int i8259A_shutdown(struct sys_device *dev) -{ - /* Put the i8259A into a quiescent state that - * the kernel initialization code can get it - * out of. - */ - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ - return 0; -} - -static struct sysdev_class i8259_sysdev_class = { - .name = "i8259", - .suspend = i8259A_suspend, - .resume = i8259A_resume, - .shutdown = i8259A_shutdown, -}; - -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - -static int __init i8259A_init_sysfs(void) -{ - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; -} - -device_initcall(i8259A_init_sysfs); - -void init_8259A(int auto_eoi) -{ - unsigned long flags; - - i8259A_auto_eoi = auto_eoi; - - spin_lock_irqsave(&i8259A_lock, flags); - - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ - - /* - * outb_pic - this has to work on a wide range of PC hardware. - */ - outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ - /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ - outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); - /* 8259A-1 (the master) has a slave on IR2 */ - outb_pic(0x04, PIC_MASTER_IMR); - if (auto_eoi) /* master does Auto EOI */ - outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); - else /* master expects normal EOI */ - outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); - - outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ - /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ - outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); - /* 8259A-2 is a slave on master's IR2 */ - outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); - /* (slave's support for AEOI in flat mode is to be investigated) */ - outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); - - if (auto_eoi) - /* - * In AEOI mode we just have to mask the interrupt - * when acking. - */ - i8259A_chip.mask_ack = disable_8259A_irq; - else - i8259A_chip.mask_ack = mask_and_ack_8259A; - - udelay(100); /* wait for 8259A to initialize */ - - outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ - outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ - - spin_unlock_irqrestore(&i8259A_lock, flags); -} - - - - -/* - * IRQ2 is cascade interrupt to second interrupt controller - */ - -static struct irqaction irq2 = { - .handler = no_action, - .mask = CPU_MASK_NONE, - .name = "cascade", -}; -DEFINE_PER_CPU(vector_irq_t, vector_irq) = { - [0 ... IRQ0_VECTOR - 1] = -1, - [IRQ0_VECTOR] = 0, - [IRQ1_VECTOR] = 1, - [IRQ2_VECTOR] = 2, - [IRQ3_VECTOR] = 3, - [IRQ4_VECTOR] = 4, - [IRQ5_VECTOR] = 5, - [IRQ6_VECTOR] = 6, - [IRQ7_VECTOR] = 7, - [IRQ8_VECTOR] = 8, - [IRQ9_VECTOR] = 9, - [IRQ10_VECTOR] = 10, - [IRQ11_VECTOR] = 11, - [IRQ12_VECTOR] = 12, - [IRQ13_VECTOR] = 13, - [IRQ14_VECTOR] = 14, - [IRQ15_VECTOR] = 15, - [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 -}; - -void __init init_ISA_irqs (void) -{ - int i; - - init_bsp_APIC(); - init_8259A(0); - - for (i = 0; i < NR_IRQS; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - - if (i < 16) { - /* - * 16 old-style INTA-cycle interrupts: - */ - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } else { - /* - * 'high' PCI IRQs filled in on demand - */ - irq_desc[i].chip = &no_irq_chip; - } - } -} - -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -void __init native_init_IRQ(void) -{ - int i; - - init_ISA_irqs(); - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { - int vector = FIRST_EXTERNAL_VECTOR + i; - if (vector != IA32_SYSCALL_VECTOR) - set_intr_gate(vector, interrupt[i]); - } - -#ifdef CONFIG_SMP - /* - * The reschedule interrupt is a CPU-to-CPU reschedule-helper - * IPI, driven by wakeup. - */ - set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - - /* IPIs for invalidation */ - set_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); - - /* IPI for generic function call */ - set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); - - /* Low priority IPI to cleanup after moving an irq */ - set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); -#endif - set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); - set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); - - /* self generated IPI for local APIC timer */ - set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - - /* IPI vectors for APIC spurious and error interrupts */ - set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); - - if (!acpi_ioapic) - setup_irq(2, &irq2); -} diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 4dc8600d9d2..d4f9df2b022 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -58,7 +58,7 @@ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; static DEFINE_SPINLOCK(ioapic_lock); static DEFINE_SPINLOCK(vector_lock); -int timer_over_8254 __initdata = 1; +int timer_through_8259 __initdata; /* * Is the SiS APIC rmw bug present ? @@ -239,7 +239,7 @@ static void __init replace_pin_at_irq(unsigned int irq, } } -static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsigned long disable) +static void __modify_IO_APIC_irq(unsigned int irq, unsigned long enable, unsigned long disable) { struct irq_pin_list *entry = irq_2_pin + irq; unsigned int pin, reg; @@ -259,30 +259,32 @@ static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsign } /* mask = 1 */ -static void __mask_IO_APIC_irq (unsigned int irq) +static void __mask_IO_APIC_irq(unsigned int irq) { - __modify_IO_APIC_irq(irq, 0x00010000, 0); + __modify_IO_APIC_irq(irq, IO_APIC_REDIR_MASKED, 0); } /* mask = 0 */ -static void __unmask_IO_APIC_irq (unsigned int irq) +static void __unmask_IO_APIC_irq(unsigned int irq) { - __modify_IO_APIC_irq(irq, 0, 0x00010000); + __modify_IO_APIC_irq(irq, 0, IO_APIC_REDIR_MASKED); } /* mask = 1, trigger = 0 */ -static void __mask_and_edge_IO_APIC_irq (unsigned int irq) +static void __mask_and_edge_IO_APIC_irq(unsigned int irq) { - __modify_IO_APIC_irq(irq, 0x00010000, 0x00008000); + __modify_IO_APIC_irq(irq, IO_APIC_REDIR_MASKED, + IO_APIC_REDIR_LEVEL_TRIGGER); } /* mask = 0, trigger = 1 */ -static void __unmask_and_level_IO_APIC_irq (unsigned int irq) +static void __unmask_and_level_IO_APIC_irq(unsigned int irq) { - __modify_IO_APIC_irq(irq, 0x00008000, 0x00010000); + __modify_IO_APIC_irq(irq, IO_APIC_REDIR_LEVEL_TRIGGER, + IO_APIC_REDIR_MASKED); } -static void mask_IO_APIC_irq (unsigned int irq) +static void mask_IO_APIC_irq(unsigned int irq) { unsigned long flags; @@ -291,7 +293,7 @@ static void mask_IO_APIC_irq (unsigned int irq) spin_unlock_irqrestore(&ioapic_lock, flags); } -static void unmask_IO_APIC_irq (unsigned int irq) +static void unmask_IO_APIC_irq(unsigned int irq) { unsigned long flags; @@ -303,7 +305,7 @@ static void unmask_IO_APIC_irq (unsigned int irq) static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) { struct IO_APIC_route_entry entry; - + /* Check delivery_mode to be sure we're not clearing an SMI pin */ entry = ioapic_read_entry(apic, pin); if (entry.delivery_mode == dest_SMI) @@ -315,7 +317,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) ioapic_mask_entry(apic, pin); } -static void clear_IO_APIC (void) +static void clear_IO_APIC(void) { int apic, pin; @@ -332,7 +334,7 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) struct irq_pin_list *entry = irq_2_pin + irq; unsigned int apicid_value; cpumask_t tmp; - + cpus_and(tmp, cpumask, cpu_online_map); if (cpus_empty(tmp)) tmp = TARGET_CPUS; @@ -361,7 +363,7 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) # include <linux/kernel_stat.h> /* kstat */ # include <linux/slab.h> /* kmalloc() */ # include <linux/timer.h> - + #define IRQBALANCE_CHECK_ARCH -999 #define MAX_BALANCED_IRQ_INTERVAL (5*HZ) #define MIN_BALANCED_IRQ_INTERVAL (HZ/2) @@ -373,14 +375,14 @@ static int physical_balance __read_mostly; static long balanced_irq_interval __read_mostly = MAX_BALANCED_IRQ_INTERVAL; static struct irq_cpu_info { - unsigned long * last_irq; - unsigned long * irq_delta; + unsigned long *last_irq; + unsigned long *irq_delta; unsigned long irq; } irq_cpu_data[NR_CPUS]; #define CPU_IRQ(cpu) (irq_cpu_data[cpu].irq) -#define LAST_CPU_IRQ(cpu,irq) (irq_cpu_data[cpu].last_irq[irq]) -#define IRQ_DELTA(cpu,irq) (irq_cpu_data[cpu].irq_delta[irq]) +#define LAST_CPU_IRQ(cpu, irq) (irq_cpu_data[cpu].last_irq[irq]) +#define IRQ_DELTA(cpu, irq) (irq_cpu_data[cpu].irq_delta[irq]) #define IDLE_ENOUGH(cpu,now) \ (idle_cpu(cpu) && ((now) - per_cpu(irq_stat, (cpu)).idle_timestamp > 1)) @@ -419,8 +421,8 @@ inside: if (cpu == -1) cpu = NR_CPUS-1; } - } while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu,allowed_mask) || - (search_idle && !IDLE_ENOUGH(cpu,now))); + } while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu, allowed_mask) || + (search_idle && !IDLE_ENOUGH(cpu, now))); return cpu; } @@ -430,15 +432,14 @@ static inline void balance_irq(int cpu, int irq) unsigned long now = jiffies; cpumask_t allowed_mask; unsigned int new_cpu; - + if (irqbalance_disabled) - return; + return; cpus_and(allowed_mask, cpu_online_map, balance_irq_affinity[irq]); new_cpu = move(cpu, allowed_mask, now, 1); - if (cpu != new_cpu) { + if (cpu != new_cpu) set_pending_irq(irq, cpumask_of_cpu(new_cpu)); - } } static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold) @@ -450,14 +451,14 @@ static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold) if (!irq_desc[j].action) continue; /* Is it a significant load ? */ - if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i),j) < + if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i), j) < useful_load_threshold) continue; balance_irq(i, j); } } balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL, - balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); + balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); return; } @@ -486,22 +487,22 @@ static void do_irq_balance(void) /* Is this an active IRQ or balancing disabled ? */ if (!irq_desc[j].action || irq_balancing_disabled(j)) continue; - if ( package_index == i ) - IRQ_DELTA(package_index,j) = 0; + if (package_index == i) + IRQ_DELTA(package_index, j) = 0; /* Determine the total count per processor per IRQ */ value_now = (unsigned long) kstat_cpu(i).irqs[j]; /* Determine the activity per processor per IRQ */ - delta = value_now - LAST_CPU_IRQ(i,j); + delta = value_now - LAST_CPU_IRQ(i, j); /* Update last_cpu_irq[][] for the next time */ - LAST_CPU_IRQ(i,j) = value_now; + LAST_CPU_IRQ(i, j) = value_now; /* Ignore IRQs whose rate is less than the clock */ if (delta < useful_load_threshold) continue; /* update the load for the processor or package total */ - IRQ_DELTA(package_index,j) += delta; + IRQ_DELTA(package_index, j) += delta; /* Keep track of the higher numbered sibling as well */ if (i != package_index) @@ -527,7 +528,8 @@ static void do_irq_balance(void) max_cpu_irq = ULONG_MAX; tryanothercpu: - /* Look for heaviest loaded processor. + /* + * Look for heaviest loaded processor. * We may come back to get the next heaviest loaded processor. * Skip processors with trivial loads. */ @@ -536,7 +538,7 @@ tryanothercpu: for_each_online_cpu(i) { if (i != CPU_TO_PACKAGEINDEX(i)) continue; - if (max_cpu_irq <= CPU_IRQ(i)) + if (max_cpu_irq <= CPU_IRQ(i)) continue; if (tmp_cpu_irq < CPU_IRQ(i)) { tmp_cpu_irq = CPU_IRQ(i); @@ -545,8 +547,9 @@ tryanothercpu: } if (tmp_loaded == -1) { - /* In the case of small number of heavy interrupt sources, - * loading some of the cpus too much. We use Ingo's original + /* + * In the case of small number of heavy interrupt sources, + * loading some of the cpus too much. We use Ingo's original * approach to rotate them around. */ if (!first_attempt && imbalance >= useful_load_threshold) { @@ -555,13 +558,14 @@ tryanothercpu: } goto not_worth_the_effort; } - + first_attempt = 0; /* heaviest search */ max_cpu_irq = tmp_cpu_irq; /* load */ max_loaded = tmp_loaded; /* processor */ imbalance = (max_cpu_irq - min_cpu_irq) / 2; - - /* if imbalance is less than approx 10% of max load, then + + /* + * if imbalance is less than approx 10% of max load, then * observe diminishing returns action. - quit */ if (imbalance < (max_cpu_irq >> 3)) @@ -577,26 +581,25 @@ tryanotherirq: /* Is this an active IRQ? */ if (!irq_desc[j].action) continue; - if (imbalance <= IRQ_DELTA(max_loaded,j)) + if (imbalance <= IRQ_DELTA(max_loaded, j)) continue; /* Try to find the IRQ that is closest to the imbalance * without going over. */ - if (move_this_load < IRQ_DELTA(max_loaded,j)) { - move_this_load = IRQ_DELTA(max_loaded,j); + if (move_this_load < IRQ_DELTA(max_loaded, j)) { + move_this_load = IRQ_DELTA(max_loaded, j); selected_irq = j; } } - if (selected_irq == -1) { + if (selected_irq == -1) goto tryanothercpu; - } imbalance = move_this_load; - + /* For physical_balance case, we accumulated both load * values in the one of the siblings cpu_irq[], * to use the same code for physical and logical processors - * as much as possible. + * as much as possible. * * NOTE: the cpu_irq[] array holds the sum of the load for * sibling A and sibling B in the slot for the lowest numbered @@ -625,11 +628,11 @@ tryanotherirq: /* mark for change destination */ set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded)); - /* Since we made a change, come back sooner to + /* Since we made a change, come back sooner to * check for more variation. */ balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL, - balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); + balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); return; } goto tryanotherirq; @@ -640,7 +643,7 @@ not_worth_the_effort: * upward */ balanced_irq_interval = min((long)MAX_BALANCED_IRQ_INTERVAL, - balanced_irq_interval + BALANCED_IRQ_MORE_DELTA); + balanced_irq_interval + BALANCED_IRQ_MORE_DELTA); return; } @@ -679,13 +682,13 @@ static int __init balanced_irq_init(void) cpumask_t tmp; cpus_shift_right(tmp, cpu_online_map, 2); - c = &boot_cpu_data; + c = &boot_cpu_data; /* When not overwritten by the command line ask subarchitecture. */ if (irqbalance_disabled == IRQBALANCE_CHECK_ARCH) irqbalance_disabled = NO_BALANCE_IRQ; if (irqbalance_disabled) return 0; - + /* disable irqbalance completely if there is only one processor online */ if (num_online_cpus() < 2) { irqbalance_disabled = 1; @@ -699,16 +702,14 @@ static int __init balanced_irq_init(void) physical_balance = 1; for_each_online_cpu(i) { - irq_cpu_data[i].irq_delta = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); - irq_cpu_data[i].last_irq = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); + irq_cpu_data[i].irq_delta = kzalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); + irq_cpu_data[i].last_irq = kzalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); if (irq_cpu_data[i].irq_delta == NULL || irq_cpu_data[i].last_irq == NULL) { printk(KERN_ERR "balanced_irq_init: out of memory"); goto failed; } - memset(irq_cpu_data[i].irq_delta,0,sizeof(unsigned long) * NR_IRQS); - memset(irq_cpu_data[i].last_irq,0,sizeof(unsigned long) * NR_IRQS); } - + printk(KERN_INFO "Starting balanced_irq\n"); if (!IS_ERR(kthread_run(balanced_irq, NULL, "kirqd"))) return 0; @@ -843,7 +844,7 @@ static int __init find_isa_irq_apic(int irq, int type) } if (i < mp_irq_entries) { int apic; - for(apic = 0; apic < nr_ioapics; apic++) { + for (apic = 0; apic < nr_ioapics; apic++) { if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic) return apic; } @@ -880,7 +881,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) !mp_irqs[i].mpc_irqtype && (bus == lbus) && (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { - int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq); + int irq = pin_2_irq(i, apic, mp_irqs[i].mpc_dstirq); if (!(apic || IO_APIC_IRQ(irq))) continue; @@ -900,7 +901,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); /* - * This function currently is only a helper for the i386 smp boot process where + * This function currently is only a helper for the i386 smp boot process where * we need to reprogram the ioredtbls to cater for the cpus which have come online * so mask in all cases should simply be TARGET_CPUS */ @@ -975,37 +976,36 @@ static int MPBIOS_polarity(int idx) /* * Determine IRQ line polarity (high active or low active): */ - switch (mp_irqs[idx].mpc_irqflag & 3) + switch (mp_irqs[idx].mpc_irqflag & 3) { + case 0: /* conforms, ie. bus-type dependent polarity */ { - case 0: /* conforms, ie. bus-type dependent polarity */ - { - polarity = test_bit(bus, mp_bus_not_pci)? - default_ISA_polarity(idx): - default_PCI_polarity(idx); - break; - } - case 1: /* high active */ - { - polarity = 0; - break; - } - case 2: /* reserved */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - polarity = 1; - break; - } - case 3: /* low active */ - { - polarity = 1; - break; - } - default: /* invalid */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - polarity = 1; - break; - } + polarity = test_bit(bus, mp_bus_not_pci)? + default_ISA_polarity(idx): + default_PCI_polarity(idx); + break; + } + case 1: /* high active */ + { + polarity = 0; + break; + } + case 2: /* reserved */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + polarity = 1; + break; + } + case 3: /* low active */ + { + polarity = 1; + break; + } + default: /* invalid */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + polarity = 1; + break; + } } return polarity; } @@ -1018,69 +1018,67 @@ static int MPBIOS_trigger(int idx) /* * Determine IRQ trigger mode (edge or level sensitive): */ - switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) + switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) { + case 0: /* conforms, ie. bus-type dependent */ { - case 0: /* conforms, ie. bus-type dependent */ - { - trigger = test_bit(bus, mp_bus_not_pci)? - default_ISA_trigger(idx): - default_PCI_trigger(idx); + trigger = test_bit(bus, mp_bus_not_pci)? + default_ISA_trigger(idx): + default_PCI_trigger(idx); #if defined(CONFIG_EISA) || defined(CONFIG_MCA) - switch (mp_bus_id_to_type[bus]) - { - case MP_BUS_ISA: /* ISA pin */ - { - /* set before the switch */ - break; - } - case MP_BUS_EISA: /* EISA pin */ - { - trigger = default_EISA_trigger(idx); - break; - } - case MP_BUS_PCI: /* PCI pin */ - { - /* set before the switch */ - break; - } - case MP_BUS_MCA: /* MCA pin */ - { - trigger = default_MCA_trigger(idx); - break; - } - default: - { - printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 1; - break; - } - } -#endif + switch (mp_bus_id_to_type[bus]) { + case MP_BUS_ISA: /* ISA pin */ + { + /* set before the switch */ break; } - case 1: /* edge */ + case MP_BUS_EISA: /* EISA pin */ { - trigger = 0; + trigger = default_EISA_trigger(idx); break; } - case 2: /* reserved */ + case MP_BUS_PCI: /* PCI pin */ { - printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 1; + /* set before the switch */ break; } - case 3: /* level */ + case MP_BUS_MCA: /* MCA pin */ { - trigger = 1; + trigger = default_MCA_trigger(idx); break; } - default: /* invalid */ + default: { printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 0; + trigger = 1; break; } } +#endif + break; + } + case 1: /* edge */ + { + trigger = 0; + break; + } + case 2: /* reserved */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + trigger = 1; + break; + } + case 3: /* level */ + { + trigger = 1; + break; + } + default: /* invalid */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + trigger = 0; + break; + } + } return trigger; } @@ -1148,8 +1146,8 @@ static inline int IO_APIC_irq_trigger(int irq) for (apic = 0; apic < nr_ioapics; apic++) { for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { - idx = find_irq_entry(apic,pin,mp_INT); - if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin))) + idx = find_irq_entry(apic, pin, mp_INT); + if ((idx != -1) && (irq == pin_2_irq(idx, apic, pin))) return irq_trigger(idx); } } @@ -1164,7 +1162,7 @@ static u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 } static int __assign_irq_vector(int irq) { - static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0; + static int current_vector = FIRST_DEVICE_VECTOR, current_offset; int vector, offset; BUG_ON((unsigned)irq >= NR_IRQ_VECTORS); @@ -1237,15 +1235,15 @@ static void __init setup_IO_APIC_irqs(void) /* * add it to the IO-APIC irq-routing table: */ - memset(&entry,0,sizeof(entry)); + memset(&entry, 0, sizeof(entry)); entry.delivery_mode = INT_DELIVERY_MODE; entry.dest_mode = INT_DEST_MODE; entry.mask = 0; /* enable IRQ */ - entry.dest.logical.logical_dest = + entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); - idx = find_irq_entry(apic,pin,mp_INT); + idx = find_irq_entry(apic, pin, mp_INT); if (idx == -1) { if (first_notcon) { apic_printk(APIC_VERBOSE, KERN_DEBUG @@ -1289,7 +1287,7 @@ static void __init setup_IO_APIC_irqs(void) vector = assign_irq_vector(irq); entry.vector = vector; ioapic_register_intr(irq, vector, IOAPIC_AUTO); - + if (!apic && (irq < 16)) disable_8259A_irq(irq); } @@ -1302,25 +1300,21 @@ static void __init setup_IO_APIC_irqs(void) } /* - * Set up the 8259A-master output pin: + * Set up the timer pin, possibly with the 8259A-master behind. */ -static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector) +static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin, + int vector) { struct IO_APIC_route_entry entry; - memset(&entry,0,sizeof(entry)); - - disable_8259A_irq(0); - - /* mask LVT0 */ - apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); + memset(&entry, 0, sizeof(entry)); /* * We use logical delivery to get the timer IRQ * to the first CPU. */ entry.dest_mode = INT_DEST_MODE; - entry.mask = 0; /* unmask IRQ now */ + entry.mask = 1; /* mask IRQ now */ entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); entry.delivery_mode = INT_DELIVERY_MODE; entry.polarity = 0; @@ -1329,17 +1323,14 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in /* * The timer IRQ doesn't have to know that behind the - * scene we have a 8259A-master in AEOI mode ... + * scene we may have a 8259A-master in AEOI mode ... */ - irq_desc[0].chip = &ioapic_chip; - set_irq_handler(0, handle_edge_irq); + ioapic_register_intr(0, vector, IOAPIC_EDGE); /* * Add it to the IO-APIC irq-routing table: */ ioapic_write_entry(apic, pin, entry); - - enable_8259A_irq(0); } void __init print_IO_APIC(void) @@ -1354,7 +1345,7 @@ void __init print_IO_APIC(void) if (apic_verbosity == APIC_QUIET) return; - printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); + printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); for (i = 0; i < nr_ioapics; i++) printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]); @@ -1459,7 +1450,7 @@ void __init print_IO_APIC(void) #if 0 -static void print_APIC_bitfield (int base) +static void print_APIC_bitfield(int base) { unsigned int v; int i, j; @@ -1480,7 +1471,7 @@ static void print_APIC_bitfield (int base) } } -void /*__init*/ print_local_APIC(void * dummy) +void /*__init*/ print_local_APIC(void *dummy) { unsigned int v, ver, maxlvt; @@ -1489,6 +1480,7 @@ void /*__init*/ print_local_APIC(void * dummy) printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", smp_processor_id(), hard_smp_processor_id()); + v = apic_read(APIC_ID); printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(read_apic_id())); v = apic_read(APIC_LVR); @@ -1563,7 +1555,7 @@ void /*__init*/ print_local_APIC(void * dummy) printk("\n"); } -void print_all_local_APICs (void) +void print_all_local_APICs(void) { on_each_cpu(print_local_APIC, NULL, 1, 1); } @@ -1586,11 +1578,11 @@ void /*__init*/ print_PIC(void) v = inb(0xa0) << 8 | inb(0x20); printk(KERN_DEBUG "... PIC IRR: %04x\n", v); - outb(0x0b,0xa0); - outb(0x0b,0x20); + outb(0x0b, 0xa0); + outb(0x0b, 0x20); v = inb(0xa0) << 8 | inb(0x20); - outb(0x0a,0xa0); - outb(0x0a,0x20); + outb(0x0a, 0xa0); + outb(0x0a, 0x20); spin_unlock_irqrestore(&i8259A_lock, flags); @@ -1626,7 +1618,7 @@ static void __init enable_IO_APIC(void) spin_unlock_irqrestore(&ioapic_lock, flags); nr_ioapic_registers[apic] = reg_01.bits.entries+1; } - for(apic = 0; apic < nr_ioapics; apic++) { + for (apic = 0; apic < nr_ioapics; apic++) { int pin; /* See if any of the pins is in ExtINT mode */ for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { @@ -1748,7 +1740,7 @@ static void __init setup_ioapic_ids_from_mpc(void) spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(apic, 0); spin_unlock_irqrestore(&ioapic_lock, flags); - + old_id = mp_ioapics[apic].mpc_apicid; if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) { @@ -1800,7 +1792,7 @@ static void __init setup_ioapic_ids_from_mpc(void) /* * Read the right value from the MPC table and * write it into the ID register. - */ + */ apic_printk(APIC_VERBOSE, KERN_INFO "...changing IO-APIC physical APIC ID to %d ...", mp_ioapics[apic].mpc_apicid); @@ -2020,7 +2012,7 @@ static void ack_apic(unsigned int irq) ack_APIC_irq(); } -static void mask_lapic_irq (unsigned int irq) +static void mask_lapic_irq(unsigned int irq) { unsigned long v; @@ -2028,7 +2020,7 @@ static void mask_lapic_irq (unsigned int irq) apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED); } -static void unmask_lapic_irq (unsigned int irq) +static void unmask_lapic_irq(unsigned int irq) { unsigned long v; @@ -2037,7 +2029,7 @@ static void unmask_lapic_irq (unsigned int irq) } static struct irq_chip lapic_chip __read_mostly = { - .name = "local-APIC-edge", + .name = "local-APIC", .mask = mask_lapic_irq, .unmask = unmask_lapic_irq, .eoi = ack_apic, @@ -2046,14 +2038,14 @@ static struct irq_chip lapic_chip __read_mostly = { static void __init setup_nmi(void) { /* - * Dirty trick to enable the NMI watchdog ... + * Dirty trick to enable the NMI watchdog ... * We put the 8259A master into AEOI mode and * unmask on all local APICs LVT0 as NMI. * * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire') * is from Maciej W. Rozycki - so we do not have to EOI from * the NMI handler or the timer interrupt. - */ + */ apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ..."); enable_NMI_through_LVT0(); @@ -2129,11 +2121,16 @@ static inline void __init unlock_ExtINT_logic(void) static inline void __init check_timer(void) { int apic1, pin1, apic2, pin2; + int no_pin1 = 0; int vector; + unsigned int ver; unsigned long flags; local_irq_save(flags); + ver = apic_read(APIC_LVR); + ver = GET_APIC_VERSION(ver); + /* * get/set the timer IRQ vector: */ @@ -2142,17 +2139,17 @@ static inline void __init check_timer(void) set_intr_gate(vector, interrupt[0]); /* - * Subtle, code in do_timer_interrupt() expects an AEOI - * mode for the 8259A whenever interrupts are routed - * through I/O APICs. Also IRQ0 has to be enabled in - * the 8259A which implies the virtual wire has to be - * disabled in the local APIC. + * As IRQ0 is to be enabled in the 8259A, the virtual + * wire has to be disabled in the local APIC. Also + * timer interrupts need to be acknowledged manually in + * the 8259A for the i82489DX when using the NMI + * watchdog as that APIC treats NMIs as level-triggered. + * The AEOI mode will finish them in the 8259A + * automatically. */ apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); init_8259A(1); - timer_ack = 1; - if (timer_over_8254 > 0) - enable_8259A_irq(0); + timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver)); pin1 = find_isa_irq_pin(0, mp_INT); apic1 = find_isa_irq_apic(0, mp_INT); @@ -2162,14 +2159,33 @@ static inline void __init check_timer(void) printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", vector, apic1, pin1, apic2, pin2); + /* + * Some BIOS writers are clueless and report the ExtINTA + * I/O APIC input from the cascaded 8259A as the timer + * interrupt input. So just in case, if only one pin + * was found above, try it both directly and through the + * 8259A. + */ + if (pin1 == -1) { + pin1 = pin2; + apic1 = apic2; + no_pin1 = 1; + } else if (pin2 == -1) { + pin2 = pin1; + apic2 = apic1; + } + if (pin1 != -1) { /* * Ok, does IRQ0 through the IOAPIC work? */ + if (no_pin1) { + add_pin_to_irq(0, apic1, pin1); + setup_timer_IRQ0_pin(apic1, pin1, vector); + } unmask_IO_APIC_irq(0); if (timer_irq_works()) { if (nmi_watchdog == NMI_IO_APIC) { - disable_8259A_irq(0); setup_nmi(); enable_8259A_irq(0); } @@ -2178,43 +2194,46 @@ static inline void __init check_timer(void) goto out; } clear_IO_APIC_pin(apic1, pin1); - printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to " - "IO-APIC\n"); - } + if (!no_pin1) + printk(KERN_ERR "..MP-BIOS bug: " + "8254 timer not connected to IO-APIC\n"); - printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... "); - if (pin2 != -1) { + printk(KERN_INFO "...trying to set up timer (IRQ0) " + "through the 8259A ... "); printk("\n..... (found pin %d) ...", pin2); /* * legacy devices should be connected to IO APIC #0 */ - setup_ExtINT_IRQ0_pin(apic2, pin2, vector); + replace_pin_at_irq(0, apic1, pin1, apic2, pin2); + setup_timer_IRQ0_pin(apic2, pin2, vector); + unmask_IO_APIC_irq(0); + enable_8259A_irq(0); if (timer_irq_works()) { printk("works.\n"); - if (pin1 != -1) - replace_pin_at_irq(0, apic1, pin1, apic2, pin2); - else - add_pin_to_irq(0, apic2, pin2); + timer_through_8259 = 1; if (nmi_watchdog == NMI_IO_APIC) { + disable_8259A_irq(0); setup_nmi(); + enable_8259A_irq(0); } goto out; } /* * Cleanup, just in case ... */ + disable_8259A_irq(0); clear_IO_APIC_pin(apic2, pin2); + printk(" failed.\n"); } - printk(" failed.\n"); if (nmi_watchdog == NMI_IO_APIC) { printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); - nmi_watchdog = 0; + nmi_watchdog = NMI_NONE; } + timer_ack = 0; printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); - disable_8259A_irq(0); set_irq_chip_and_handler_name(0, &lapic_chip, handle_fasteoi_irq, "fasteoi"); apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */ @@ -2224,12 +2243,12 @@ static inline void __init check_timer(void) printk(" works.\n"); goto out; } + disable_8259A_irq(0); apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector); printk(" failed.\n"); printk(KERN_INFO "...trying to set up timer as ExtINT IRQ..."); - timer_ack = 0; init_8259A(0); make_8259A_irq(0); apic_write_around(APIC_LVT0, APIC_DM_EXTINT); @@ -2286,28 +2305,14 @@ void __init setup_IO_APIC(void) print_IO_APIC(); } -static int __init setup_disable_8254_timer(char *s) -{ - timer_over_8254 = -1; - return 1; -} -static int __init setup_enable_8254_timer(char *s) -{ - timer_over_8254 = 2; - return 1; -} - -__setup("disable_8254_timer", setup_disable_8254_timer); -__setup("enable_8254_timer", setup_enable_8254_timer); - /* * Called after all the initialization is done. If we didnt find any * APIC bugs then we can allow the modify fast path */ - + static int __init io_apic_bug_finalize(void) { - if(sis_apic_bug == -1) + if (sis_apic_bug == -1) sis_apic_bug = 0; return 0; } @@ -2318,17 +2323,17 @@ struct sysfs_ioapic_data { struct sys_device dev; struct IO_APIC_route_entry entry[0]; }; -static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS]; +static struct sysfs_ioapic_data *mp_ioapic_data[MAX_IO_APICS]; static int ioapic_suspend(struct sys_device *dev, pm_message_t state) { struct IO_APIC_route_entry *entry; struct sysfs_ioapic_data *data; int i; - + data = container_of(dev, struct sysfs_ioapic_data, dev); entry = data->entry; - for (i = 0; i < nr_ioapic_registers[dev->id]; i ++) + for (i = 0; i < nr_ioapic_registers[dev->id]; i++) entry[i] = ioapic_read_entry(dev->id, i); return 0; @@ -2341,7 +2346,7 @@ static int ioapic_resume(struct sys_device *dev) unsigned long flags; union IO_APIC_reg_00 reg_00; int i; - + data = container_of(dev, struct sysfs_ioapic_data, dev); entry = data->entry; @@ -2352,7 +2357,7 @@ static int ioapic_resume(struct sys_device *dev) io_apic_write(dev->id, 0, reg_00.raw); } spin_unlock_irqrestore(&ioapic_lock, flags); - for (i = 0; i < nr_ioapic_registers[dev->id]; i ++) + for (i = 0; i < nr_ioapic_registers[dev->id]; i++) ioapic_write_entry(dev->id, i, entry[i]); return 0; @@ -2366,24 +2371,23 @@ static struct sysdev_class ioapic_sysdev_class = { static int __init ioapic_init_sysfs(void) { - struct sys_device * dev; + struct sys_device *dev; int i, size, error = 0; error = sysdev_class_register(&ioapic_sysdev_class); if (error) return error; - for (i = 0; i < nr_ioapics; i++ ) { - size = sizeof(struct sys_device) + nr_ioapic_registers[i] + for (i = 0; i < nr_ioapics; i++) { + size = sizeof(struct sys_device) + nr_ioapic_registers[i] * sizeof(struct IO_APIC_route_entry); - mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL); + mp_ioapic_data[i] = kzalloc(size, GFP_KERNEL); if (!mp_ioapic_data[i]) { printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); continue; } - memset(mp_ioapic_data[i], 0, size); dev = &mp_ioapic_data[i]->dev; - dev->id = i; + dev->id = i; dev->cls = &ioapic_sysdev_class; error = sysdev_register(dev); if (error) { @@ -2458,7 +2462,7 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms msg->address_lo = MSI_ADDR_BASE_LO | ((INT_DEST_MODE == 0) ? - MSI_ADDR_DEST_MODE_PHYSICAL: +MSI_ADDR_DEST_MODE_PHYSICAL: MSI_ADDR_DEST_MODE_LOGICAL) | ((INT_DELIVERY_MODE != dest_LowestPrio) ? MSI_ADDR_REDIRECTION_CPU: @@ -2469,7 +2473,7 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms MSI_DATA_TRIGGER_EDGE | MSI_DATA_LEVEL_ASSERT | ((INT_DELIVERY_MODE != dest_LowestPrio) ? - MSI_DATA_DELIVERY_FIXED: +MSI_DATA_DELIVERY_FIXED: MSI_DATA_DELIVERY_LOWPRI) | MSI_DATA_VECTOR(vector); } @@ -2640,12 +2644,12 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) #endif /* CONFIG_HT_IRQ */ /* -------------------------------------------------------------------------- - ACPI-based IOAPIC Configuration + ACPI-based IOAPIC Configuration -------------------------------------------------------------------------- */ #ifdef CONFIG_ACPI -int __init io_apic_get_unique_id (int ioapic, int apic_id) +int __init io_apic_get_unique_id(int ioapic, int apic_id) { union IO_APIC_reg_00 reg_00; static physid_mask_t apic_id_map = PHYSID_MASK_NONE; @@ -2654,10 +2658,10 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) int i = 0; /* - * The P4 platform supports up to 256 APIC IDs on two separate APIC - * buses (one for LAPICs, one for IOAPICs), where predecessors only + * The P4 platform supports up to 256 APIC IDs on two separate APIC + * buses (one for LAPICs, one for IOAPICs), where predecessors only * supports up to 16 on one shared APIC bus. - * + * * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full * advantage of new APIC bus architecture. */ @@ -2676,7 +2680,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) } /* - * Every APIC in a system must have a unique ID or we get lots of nice + * Every APIC in a system must have a unique ID or we get lots of nice * 'stuck on smp_invalidate_needed IPI wait' messages. */ if (check_apicid_used(apic_id_map, apic_id)) { @@ -2693,7 +2697,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) "trying %d\n", ioapic, apic_id, i); apic_id = i; - } + } tmp = apicid_to_cpu_present(apic_id); physids_or(apic_id_map, apic_id_map, tmp); @@ -2720,7 +2724,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) } -int __init io_apic_get_version (int ioapic) +int __init io_apic_get_version(int ioapic) { union IO_APIC_reg_01 reg_01; unsigned long flags; @@ -2733,7 +2737,7 @@ int __init io_apic_get_version (int ioapic) } -int __init io_apic_get_redir_entries (int ioapic) +int __init io_apic_get_redir_entries(int ioapic) { union IO_APIC_reg_01 reg_01; unsigned long flags; @@ -2746,7 +2750,7 @@ int __init io_apic_get_redir_entries (int ioapic) } -int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low) +int io_apic_set_pci_routing(int ioapic, int pin, int irq, int edge_level, int active_high_low) { struct IO_APIC_route_entry entry; @@ -2762,7 +2766,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a * corresponding device driver registers for this IRQ. */ - memset(&entry,0,sizeof(entry)); + memset(&entry, 0, sizeof(entry)); entry.delivery_mode = INT_DELIVERY_MODE; entry.dest_mode = INT_DEST_MODE; diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index ef1a8dfcc52..e5ef6030356 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -61,7 +61,7 @@ struct irq_cfg { }; /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */ -struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = { +static struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = { [0] = { .domain = CPU_MASK_ALL, .vector = IRQ0_VECTOR, }, [1] = { .domain = CPU_MASK_ALL, .vector = IRQ1_VECTOR, }, [2] = { .domain = CPU_MASK_ALL, .vector = IRQ2_VECTOR, }, @@ -90,7 +90,7 @@ static int no_timer_check; static int disable_timer_pin_1 __initdata; -int timer_over_8254 __initdata = 1; +int timer_through_8259 __initdata; /* Where if anywhere is the i8259 connect in external int mode */ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; @@ -183,7 +183,7 @@ static bool io_apic_level_ack_pending(unsigned int irq) break; reg = io_apic_read(entry->apic, 0x10 + pin*2); /* Is the remote IRR bit set? */ - if ((reg >> 14) & 1) { + if (reg & IO_APIC_REDIR_REMOTE_IRR) { spin_unlock_irqrestore(&ioapic_lock, flags); return true; } @@ -298,7 +298,7 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector) break; io_apic_write(apic, 0x11 + pin*2, dest); reg = io_apic_read(apic, 0x10 + pin*2); - reg &= ~0x000000ff; + reg &= ~IO_APIC_REDIR_VECTOR_MASK; reg |= vector; io_apic_modify(apic, reg); if (!entry->next) @@ -360,16 +360,37 @@ static void add_pin_to_irq(unsigned int irq, int apic, int pin) entry->pin = pin; } +/* + * Reroute an IRQ to a different pin. + */ +static void __init replace_pin_at_irq(unsigned int irq, + int oldapic, int oldpin, + int newapic, int newpin) +{ + struct irq_pin_list *entry = irq_2_pin + irq; + + while (1) { + if (entry->apic == oldapic && entry->pin == oldpin) { + entry->apic = newapic; + entry->pin = newpin; + } + if (!entry->next) + break; + entry = irq_2_pin + entry->next; + } +} + #define DO_ACTION(name,R,ACTION, FINAL) \ \ static void name##_IO_APIC_irq (unsigned int irq) \ __DO_ACTION(R, ACTION, FINAL) -DO_ACTION( __mask, 0, |= 0x00010000, io_apic_sync(entry->apic) ) - /* mask = 1 */ -DO_ACTION( __unmask, 0, &= 0xfffeffff, ) - /* mask = 0 */ +/* mask = 1 */ +DO_ACTION(__mask, 0, |= IO_APIC_REDIR_MASKED, io_apic_sync(entry->apic)) + +/* mask = 0 */ +DO_ACTION(__unmask, 0, &= ~IO_APIC_REDIR_MASKED, ) static void mask_IO_APIC_irq (unsigned int irq) { @@ -430,20 +451,6 @@ static int __init disable_timer_pin_setup(char *arg) } __setup("disable_timer_pin_1", disable_timer_pin_setup); -static int __init setup_disable_8254_timer(char *s) -{ - timer_over_8254 = -1; - return 1; -} -static int __init setup_enable_8254_timer(char *s) -{ - timer_over_8254 = 2; - return 1; -} - -__setup("disable_8254_timer", setup_disable_8254_timer); -__setup("enable_8254_timer", setup_enable_8254_timer); - /* * Find the IRQ entry number of a certain pin. @@ -911,26 +918,21 @@ static void __init setup_IO_APIC_irqs(void) } /* - * Set up the 8259A-master output pin as broadcast to all - * CPUs. + * Set up the timer pin, possibly with the 8259A-master behind. */ -static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector) +static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin, + int vector) { struct IO_APIC_route_entry entry; memset(&entry, 0, sizeof(entry)); - disable_8259A_irq(0); - - /* mask LVT0 */ - apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); - /* * We use logical delivery to get the timer IRQ * to the first CPU. */ entry.dest_mode = INT_DEST_MODE; - entry.mask = 0; /* unmask IRQ now */ + entry.mask = 1; /* mask IRQ now */ entry.dest = cpu_mask_to_apicid(TARGET_CPUS); entry.delivery_mode = INT_DELIVERY_MODE; entry.polarity = 0; @@ -939,7 +941,7 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in /* * The timer IRQ doesn't have to know that behind the - * scene we have a 8259A-master in AEOI mode ... + * scene we may have a 8259A-master in AEOI mode ... */ set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge"); @@ -947,8 +949,6 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in * Add it to the IO-APIC irq-routing table: */ ioapic_write_entry(apic, pin, entry); - - enable_8259A_irq(0); } void __apicdebuginit print_IO_APIC(void) @@ -1077,6 +1077,7 @@ void __apicdebuginit print_local_APIC(void * dummy) printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", smp_processor_id(), hard_smp_processor_id()); + v = apic_read(APIC_ID); printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(read_apic_id())); v = apic_read(APIC_LVR); printk(KERN_INFO "... APIC VERSION: %08x\n", v); @@ -1659,6 +1660,7 @@ static inline void __init check_timer(void) struct irq_cfg *cfg = irq_cfg + 0; int apic1, pin1, apic2, pin2; unsigned long flags; + int no_pin1 = 0; local_irq_save(flags); @@ -1669,16 +1671,11 @@ static inline void __init check_timer(void) assign_irq_vector(0, TARGET_CPUS); /* - * Subtle, code in do_timer_interrupt() expects an AEOI - * mode for the 8259A whenever interrupts are routed - * through I/O APICs. Also IRQ0 has to be enabled in - * the 8259A which implies the virtual wire has to be - * disabled in the local APIC. + * As IRQ0 is to be enabled in the 8259A, the virtual + * wire has to be disabled in the local APIC. */ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); init_8259A(1); - if (timer_over_8254 > 0) - enable_8259A_irq(0); pin1 = find_isa_irq_pin(0, mp_INT); apic1 = find_isa_irq_apic(0, mp_INT); @@ -1688,15 +1685,39 @@ static inline void __init check_timer(void) apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", cfg->vector, apic1, pin1, apic2, pin2); + /* + * Some BIOS writers are clueless and report the ExtINTA + * I/O APIC input from the cascaded 8259A as the timer + * interrupt input. So just in case, if only one pin + * was found above, try it both directly and through the + * 8259A. + */ + if (pin1 == -1) { + pin1 = pin2; + apic1 = apic2; + no_pin1 = 1; + } else if (pin2 == -1) { + pin2 = pin1; + apic2 = apic1; + } + + replace_pin_at_irq(0, 0, 0, apic1, pin1); + apic1 = 0; + pin1 = 0; + setup_timer_IRQ0_pin(apic1, pin1, cfg->vector); + if (pin1 != -1) { /* * Ok, does IRQ0 through the IOAPIC work? */ + if (no_pin1) { + add_pin_to_irq(0, apic1, pin1); + setup_timer_IRQ0_pin(apic1, pin1, cfg->vector); + } unmask_IO_APIC_irq(0); if (!no_timer_check && timer_irq_works()) { nmi_watchdog_default(); if (nmi_watchdog == NMI_IO_APIC) { - disable_8259A_irq(0); setup_nmi(); enable_8259A_irq(0); } @@ -1705,42 +1726,48 @@ static inline void __init check_timer(void) goto out; } clear_IO_APIC_pin(apic1, pin1); - apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not " - "connected to IO-APIC\n"); - } + if (!no_pin1) + apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: " + "8254 timer not connected to IO-APIC\n"); - apic_printk(APIC_VERBOSE,KERN_INFO "...trying to set up timer (IRQ0) " - "through the 8259A ... "); - if (pin2 != -1) { + apic_printk(APIC_VERBOSE,KERN_INFO + "...trying to set up timer (IRQ0) " + "through the 8259A ... "); apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...", apic2, pin2); /* * legacy devices should be connected to IO APIC #0 */ - setup_ExtINT_IRQ0_pin(apic2, pin2, cfg->vector); + replace_pin_at_irq(0, apic1, pin1, apic2, pin2); + setup_timer_IRQ0_pin(apic2, pin2, cfg->vector); + unmask_IO_APIC_irq(0); + enable_8259A_irq(0); if (timer_irq_works()) { apic_printk(APIC_VERBOSE," works.\n"); + timer_through_8259 = 1; nmi_watchdog_default(); if (nmi_watchdog == NMI_IO_APIC) { + disable_8259A_irq(0); setup_nmi(); + enable_8259A_irq(0); } goto out; } /* * Cleanup, just in case ... */ + disable_8259A_irq(0); clear_IO_APIC_pin(apic2, pin2); + apic_printk(APIC_VERBOSE," failed.\n"); } - apic_printk(APIC_VERBOSE," failed.\n"); if (nmi_watchdog == NMI_IO_APIC) { printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); - nmi_watchdog = 0; + nmi_watchdog = NMI_NONE; } apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); - disable_8259A_irq(0); irq_desc[0].chip = &lapic_irq_type; apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */ enable_8259A_irq(0); @@ -1749,6 +1776,7 @@ static inline void __init check_timer(void) apic_printk(APIC_VERBOSE," works.\n"); goto out; } + disable_8259A_irq(0); apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector); apic_printk(APIC_VERBOSE," failed.\n"); diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c index c0df7b89ca2..9d98cda39ad 100644 --- a/arch/x86/kernel/ipi.c +++ b/arch/x86/kernel/ipi.c @@ -8,7 +8,6 @@ #include <linux/kernel_stat.h> #include <linux/mc146818rtc.h> #include <linux/cache.h> -#include <linux/interrupt.h> #include <linux/cpu.h> #include <linux/module.h> diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index 147352df28b..468acd04aa2 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -313,16 +313,20 @@ skip: per_cpu(irq_stat,j).irq_tlb_count); seq_printf(p, " TLB shootdowns\n"); #endif +#ifdef CONFIG_X86_MCE seq_printf(p, "TRM: "); for_each_online_cpu(j) seq_printf(p, "%10u ", per_cpu(irq_stat,j).irq_thermal_count); seq_printf(p, " Thermal event interrupts\n"); +#endif +#ifdef CONFIG_X86_LOCAL_APIC seq_printf(p, "SPU: "); for_each_online_cpu(j) seq_printf(p, "%10u ", per_cpu(irq_stat,j).irq_spurious_count); seq_printf(p, " Spurious interrupts\n"); +#endif seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); #if defined(CONFIG_X86_IO_APIC) seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count)); @@ -331,6 +335,40 @@ skip: return 0; } +/* + * /proc/stat helpers + */ +u64 arch_irq_stat_cpu(unsigned int cpu) +{ + u64 sum = nmi_count(cpu); + +#ifdef CONFIG_X86_LOCAL_APIC + sum += per_cpu(irq_stat, cpu).apic_timer_irqs; +#endif +#ifdef CONFIG_SMP + sum += per_cpu(irq_stat, cpu).irq_resched_count; + sum += per_cpu(irq_stat, cpu).irq_call_count; + sum += per_cpu(irq_stat, cpu).irq_tlb_count; +#endif +#ifdef CONFIG_X86_MCE + sum += per_cpu(irq_stat, cpu).irq_thermal_count; +#endif +#ifdef CONFIG_X86_LOCAL_APIC + sum += per_cpu(irq_stat, cpu).irq_spurious_count; +#endif + return sum; +} + +u64 arch_irq_stat(void) +{ + u64 sum = atomic_read(&irq_err_count); + +#ifdef CONFIG_X86_IO_APIC + sum += atomic_read(&irq_mis_count); +#endif + return sum; +} + #ifdef CONFIG_HOTPLUG_CPU #include <mach_apic.h> diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c index 3aac15466a9..1f78b238d8d 100644 --- a/arch/x86/kernel/irq_64.c +++ b/arch/x86/kernel/irq_64.c @@ -135,6 +135,7 @@ skip: seq_printf(p, "%10u ", cpu_pda(j)->irq_tlb_count); seq_printf(p, " TLB shootdowns\n"); #endif +#ifdef CONFIG_X86_MCE seq_printf(p, "TRM: "); for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_thermal_count); @@ -143,6 +144,7 @@ skip: for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_threshold_count); seq_printf(p, " Threshold APIC interrupts\n"); +#endif seq_printf(p, "SPU: "); for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_spurious_count); @@ -153,6 +155,32 @@ skip: } /* + * /proc/stat helpers + */ +u64 arch_irq_stat_cpu(unsigned int cpu) +{ + u64 sum = cpu_pda(cpu)->__nmi_count; + + sum += cpu_pda(cpu)->apic_timer_irqs; +#ifdef CONFIG_SMP + sum += cpu_pda(cpu)->irq_resched_count; + sum += cpu_pda(cpu)->irq_call_count; + sum += cpu_pda(cpu)->irq_tlb_count; +#endif +#ifdef CONFIG_X86_MCE + sum += cpu_pda(cpu)->irq_thermal_count; + sum += cpu_pda(cpu)->irq_threshold_count; +#endif + sum += cpu_pda(cpu)->irq_spurious_count; + return sum; +} + +u64 arch_irq_stat(void) +{ + return atomic_read(&irq_err_count); +} + +/* * do_IRQ handles all normal device IRQ's (the special * SMP cross-CPU interrupts have their own specific * handlers). diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c new file mode 100644 index 00000000000..d66914287ee --- /dev/null +++ b/arch/x86/kernel/irqinit_32.c @@ -0,0 +1,114 @@ +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/random.h> +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/sysdev.h> +#include <linux/bitops.h> + +#include <asm/atomic.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/timer.h> +#include <asm/pgtable.h> +#include <asm/delay.h> +#include <asm/desc.h> +#include <asm/apic.h> +#include <asm/arch_hooks.h> +#include <asm/i8259.h> + + + +/* + * Note that on a 486, we don't want to do a SIGFPE on an irq13 + * as the irq is unreliable, and exception 16 works correctly + * (ie as explained in the intel literature). On a 386, you + * can't use exception 16 due to bad IBM design, so we have to + * rely on the less exact irq13. + * + * Careful.. Not only is IRQ13 unreliable, but it is also + * leads to races. IBM designers who came up with it should + * be shot. + */ + + +static irqreturn_t math_error_irq(int cpl, void *dev_id) +{ + extern void math_error(void __user *); + outb(0,0xF0); + if (ignore_fpu_irq || !boot_cpu_data.hard_math) + return IRQ_NONE; + math_error((void __user *)get_irq_regs()->ip); + return IRQ_HANDLED; +} + +/* + * New motherboards sometimes make IRQ 13 be a PCI interrupt, + * so allow interrupt sharing. + */ +static struct irqaction fpu_irq = { + .handler = math_error_irq, + .mask = CPU_MASK_NONE, + .name = "fpu", +}; + +void __init init_ISA_irqs (void) +{ + int i; + +#ifdef CONFIG_X86_LOCAL_APIC + init_bsp_APIC(); +#endif + init_8259A(0); + + /* + * 16 old-style INTA-cycle interrupts: + */ + for (i = 0; i < 16; i++) { + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } +} + +/* Overridden in paravirt.c */ +void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); + +void __init native_init_IRQ(void) +{ + int i; + + /* all the set up before the call gates are initialised */ + pre_intr_init_hook(); + + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { + int vector = FIRST_EXTERNAL_VECTOR + i; + if (i >= NR_IRQS) + break; + /* SYSCALL_VECTOR was reserved in trap_init. */ + if (!test_bit(vector, used_vectors)) + set_intr_gate(vector, interrupt[i]); + } + + /* setup after call gates are initialised (usually add in + * the architecture specific gates) + */ + intr_init_hook(); + + /* + * External FPU? Set up irq13 if so, for + * original braindamaged IBM FERR coupling. + */ + if (boot_cpu_data.hard_math && !cpu_has_fpu) + setup_irq(FPU_IRQ, &fpu_irq); + + irq_ctx_init(smp_processor_id()); +} diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c new file mode 100644 index 00000000000..64bc0f14285 --- /dev/null +++ b/arch/x86/kernel/irqinit_64.c @@ -0,0 +1,203 @@ +#include <linux/linkage.h> +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/timex.h> +#include <linux/slab.h> +#include <linux/random.h> +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/sysdev.h> +#include <linux/bitops.h> + +#include <asm/acpi.h> +#include <asm/atomic.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/hw_irq.h> +#include <asm/pgtable.h> +#include <asm/delay.h> +#include <asm/desc.h> +#include <asm/apic.h> +#include <asm/i8259.h> + +/* + * Common place to define all x86 IRQ vectors + * + * This builds up the IRQ handler stubs using some ugly macros in irq.h + * + * These macros create the low-level assembly IRQ routines that save + * register context and call do_IRQ(). do_IRQ() then does all the + * operations that are needed to keep the AT (or SMP IOAPIC) + * interrupt-controller happy. + */ + +#define BI(x,y) \ + BUILD_IRQ(x##y) + +#define BUILD_16_IRQS(x) \ + BI(x,0) BI(x,1) BI(x,2) BI(x,3) \ + BI(x,4) BI(x,5) BI(x,6) BI(x,7) \ + BI(x,8) BI(x,9) BI(x,a) BI(x,b) \ + BI(x,c) BI(x,d) BI(x,e) BI(x,f) + +/* + * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: + * (these are usually mapped to vectors 0x30-0x3f) + */ + +/* + * The IO-APIC gives us many more interrupt sources. Most of these + * are unused but an SMP system is supposed to have enough memory ... + * sometimes (mostly wrt. hw bugs) we get corrupted vectors all + * across the spectrum, so we really want to be prepared to get all + * of these. Plus, more powerful systems might have more than 64 + * IO-APIC registers. + * + * (these are usually mapped into the 0x30-0xff vector range) + */ + BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3) +BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7) +BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb) +BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf) + +#undef BUILD_16_IRQS +#undef BI + + +#define IRQ(x,y) \ + IRQ##x##y##_interrupt + +#define IRQLIST_16(x) \ + IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \ + IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \ + IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \ + IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f) + +/* for the irq vectors */ +static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = { + IRQLIST_16(0x2), IRQLIST_16(0x3), + IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7), + IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb), + IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf) +}; + +#undef IRQ +#undef IRQLIST_16 + + + + +/* + * IRQ2 is cascade interrupt to second interrupt controller + */ + +static struct irqaction irq2 = { + .handler = no_action, + .mask = CPU_MASK_NONE, + .name = "cascade", +}; +DEFINE_PER_CPU(vector_irq_t, vector_irq) = { + [0 ... IRQ0_VECTOR - 1] = -1, + [IRQ0_VECTOR] = 0, + [IRQ1_VECTOR] = 1, + [IRQ2_VECTOR] = 2, + [IRQ3_VECTOR] = 3, + [IRQ4_VECTOR] = 4, + [IRQ5_VECTOR] = 5, + [IRQ6_VECTOR] = 6, + [IRQ7_VECTOR] = 7, + [IRQ8_VECTOR] = 8, + [IRQ9_VECTOR] = 9, + [IRQ10_VECTOR] = 10, + [IRQ11_VECTOR] = 11, + [IRQ12_VECTOR] = 12, + [IRQ13_VECTOR] = 13, + [IRQ14_VECTOR] = 14, + [IRQ15_VECTOR] = 15, + [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 +}; + +static void __init init_ISA_irqs (void) +{ + int i; + + init_bsp_APIC(); + init_8259A(0); + + for (i = 0; i < NR_IRQS; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = NULL; + irq_desc[i].depth = 1; + + if (i < 16) { + /* + * 16 old-style INTA-cycle interrupts: + */ + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } else { + /* + * 'high' PCI IRQs filled in on demand + */ + irq_desc[i].chip = &no_irq_chip; + } + } +} + +void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); + +void __init native_init_IRQ(void) +{ + int i; + + init_ISA_irqs(); + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { + int vector = FIRST_EXTERNAL_VECTOR + i; + if (vector != IA32_SYSCALL_VECTOR) + set_intr_gate(vector, interrupt[i]); + } + +#ifdef CONFIG_SMP + /* + * The reschedule interrupt is a CPU-to-CPU reschedule-helper + * IPI, driven by wakeup. + */ + set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + + /* IPIs for invalidation */ + set_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); + + /* IPI for generic function call */ + set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + + /* Low priority IPI to cleanup after moving an irq */ + set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); +#endif + set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); + set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); + + /* self generated IPI for local APIC timer */ + set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + + /* IPI vectors for APIC spurious and error interrupts */ + set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); + + if (!acpi_ioapic) + setup_irq(2, &irq2); +} diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c index 0224c3637c7..21f2bae98c1 100644 --- a/arch/x86/kernel/ldt.c +++ b/arch/x86/kernel/ldt.c @@ -20,9 +20,9 @@ #include <asm/mmu_context.h> #ifdef CONFIG_SMP -static void flush_ldt(void *null) +static void flush_ldt(void *current_mm) { - if (current->active_mm) + if (current->active_mm == current_mm) load_LDT(¤t->active_mm->context); } #endif @@ -68,7 +68,7 @@ static int alloc_ldt(mm_context_t *pc, int mincount, int reload) load_LDT(pc); mask = cpumask_of_cpu(smp_processor_id()); if (!cpus_equal(current->mm->cpu_vm_mask, mask)) - smp_call_function(flush_ldt, NULL, 1, 1); + smp_call_function(flush_ldt, current->mm, 1, 1); preempt_enable(); #else load_LDT(pc); diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c index d0b234c9fc3..f4960171bc6 100644 --- a/arch/x86/kernel/machine_kexec_32.c +++ b/arch/x86/kernel/machine_kexec_32.c @@ -39,7 +39,7 @@ static void set_idt(void *newidt, __u16 limit) curidt.address = (unsigned long)newidt; load_idt(&curidt); -}; +} static void set_gdt(void *newgdt, __u16 limit) @@ -51,7 +51,7 @@ static void set_gdt(void *newgdt, __u16 limit) curgdt.address = (unsigned long)newgdt; load_gdt(&curgdt); -}; +} static void load_segments(void) { diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c index 69729e38b78..9758fea87c5 100644 --- a/arch/x86/kernel/microcode.c +++ b/arch/x86/kernel/microcode.c @@ -5,13 +5,14 @@ * 2006 Shaohua Li <shaohua.li@intel.com> * * This driver allows to upgrade microcode on Intel processors - * belonging to IA-32 family - PentiumPro, Pentium II, + * belonging to IA-32 family - PentiumPro, Pentium II, * Pentium III, Xeon, Pentium 4, etc. * - * Reference: Section 8.10 of Volume III, Intel Pentium 4 Manual, - * Order Number 245472 or free download from: - * - * http://developer.intel.com/design/pentium4/manuals/245472.htm + * Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture + * Software Developer's Manual + * Order Number 253668 or free download from: + * + * http://developer.intel.com/design/pentium4/manuals/253668.htm * * For more information, go to http://www.urbanmyth.org/microcode * @@ -58,12 +59,12 @@ * nature of implementation. * 1.11 22 Mar 2002 Tigran Aivazian <tigran@veritas.com> * Fix the panic when writing zero-length microcode chunk. - * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>, + * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>, * Jun Nakajima <jun.nakajima@intel.com> * Support for the microcode updates in the new format. * 1.13 10 Oct 2003 Tigran Aivazian <tigran@veritas.com> * Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl - * because we no longer hold a copy of applied microcode + * because we no longer hold a copy of applied microcode * in kernel memory. * 1.14 25 Jun 2004 Tigran Aivazian <tigran@veritas.com> * Fix sigmatch() macro to handle old CPUs with pf == 0. @@ -320,11 +321,11 @@ static void apply_microcode(int cpu) return; /* serialize access to the physical write to MSR 0x79 */ - spin_lock_irqsave(µcode_update_lock, flags); + spin_lock_irqsave(µcode_update_lock, flags); /* write microcode via MSR 0x79 */ wrmsr(MSR_IA32_UCODE_WRITE, - (unsigned long) uci->mc->bits, + (unsigned long) uci->mc->bits, (unsigned long) uci->mc->bits >> 16 >> 16); wrmsr(MSR_IA32_UCODE_REV, 0, 0); @@ -341,7 +342,7 @@ static void apply_microcode(int cpu) return; } printk(KERN_INFO "microcode: CPU%d updated from revision " - "0x%x to 0x%x, date = %08x \n", + "0x%x to 0x%x, date = %08x \n", cpu_num, uci->rev, val[1], uci->mc->hdr.date); uci->rev = val[1]; } @@ -534,7 +535,7 @@ static int cpu_request_microcode(int cpu) c->x86, c->x86_model, c->x86_mask); error = request_firmware(&firmware, name, µcode_pdev->dev); if (error) { - pr_debug("microcode: ucode data file %s load failed\n", name); + pr_debug("microcode: data file %s load failed\n", name); return error; } buf = firmware->data; @@ -805,6 +806,9 @@ static int __init microcode_init (void) { int error; + printk(KERN_INFO + "IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@aivazian.fsnet.co.uk>\n"); + error = microcode_dev_init(); if (error) return error; @@ -825,9 +829,6 @@ static int __init microcode_init (void) } register_hotcpu_notifier(&mc_cpu_notifier); - - printk(KERN_INFO - "IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@aivazian.fsnet.co.uk>\n"); return 0; } diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c index edc5fbfe85c..fdfdc550b36 100644 --- a/arch/x86/kernel/mmconf-fam10h_64.c +++ b/arch/x86/kernel/mmconf-fam10h_64.c @@ -12,6 +12,7 @@ #include <asm/io.h> #include <asm/msr.h> #include <asm/acpi.h> +#include <asm/mmconfig.h> #include "../pci/pci.h" diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index 84160f74eeb..6580dae4627 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -24,8 +24,11 @@ #include <linux/kdebug.h> #include <linux/slab.h> +#include <asm/i8259.h> +#include <asm/io_apic.h> #include <asm/smp.h> #include <asm/nmi.h> +#include <asm/timer.h> #include "mach_traps.h" @@ -81,7 +84,7 @@ int __init check_nmi_watchdog(void) prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); if (!prev_nmi_count) - return -1; + goto error; printk(KERN_INFO "Testing NMI watchdog ... "); @@ -118,7 +121,7 @@ int __init check_nmi_watchdog(void) if (!atomic_read(&nmi_active)) { kfree(prev_nmi_count); atomic_set(&nmi_active, -1); - return -1; + goto error; } printk("OK.\n"); @@ -129,6 +132,12 @@ int __init check_nmi_watchdog(void) kfree(prev_nmi_count); return 0; +error: + if (nmi_watchdog == NMI_IO_APIC && !timer_through_8259) + disable_8259A_irq(0); + timer_ack = 0; + + return -1; } static int __init setup_nmi_watchdog(char *str) diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index 5a29ded994f..0060e44e898 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -21,6 +21,8 @@ #include <linux/cpumask.h> #include <linux/kdebug.h> +#include <asm/i8259.h> +#include <asm/io_apic.h> #include <asm/smp.h> #include <asm/nmi.h> #include <asm/proto.h> @@ -90,7 +92,7 @@ int __init check_nmi_watchdog(void) prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); if (!prev_nmi_count) - return -1; + goto error; printk(KERN_INFO "Testing NMI watchdog ... "); @@ -121,7 +123,7 @@ int __init check_nmi_watchdog(void) if (!atomic_read(&nmi_active)) { kfree(prev_nmi_count); atomic_set(&nmi_active, -1); - return -1; + goto error; } printk("OK.\n"); @@ -132,6 +134,11 @@ int __init check_nmi_watchdog(void) kfree(prev_nmi_count); return 0; +error: + if (nmi_watchdog == NMI_IO_APIC && !timer_through_8259) + disable_8259A_irq(0); + + return -1; } static int __init setup_nmi_watchdog(char *str) diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index 74f0c5ea2a0..f1ab0f72700 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -380,6 +380,9 @@ struct pv_mmu_ops pv_mmu_ops = { .pte_update = paravirt_nop, .pte_update_defer = paravirt_nop, + .ptep_modify_prot_start = __ptep_modify_prot_start, + .ptep_modify_prot_commit = __ptep_modify_prot_commit, + #ifdef CONFIG_HIGHPTE .kmap_atomic_pte = kmap_atomic, #endif @@ -403,6 +406,7 @@ struct pv_mmu_ops pv_mmu_ops = { #endif /* PAGETABLE_LEVELS >= 3 */ .pte_val = native_pte_val, + .pte_flags = native_pte_val, .pgd_val = native_pgd_val, .make_pte = native_make_pte, diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index dc00a1331ac..3c43109ba05 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -77,10 +77,14 @@ void __init dma32_reserve_bootmem(void) if (end_pfn <= MAX_DMA32_PFN) return; + /* + * check aperture_64.c allocate_aperture() for reason about + * using 512M as goal + */ align = 64ULL<<20; size = round_up(dma32_bootmem_size, align); dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align, - __pa(MAX_DMA_ADDRESS)); + 512ULL<<20); if (dma32_bootmem_ptr) dma32_bootmem_size = size; else @@ -88,7 +92,6 @@ void __init dma32_reserve_bootmem(void) } static void __init dma32_free_bootmem(void) { - int node; if (end_pfn <= MAX_DMA32_PFN) return; @@ -96,9 +99,7 @@ static void __init dma32_free_bootmem(void) if (!dma32_bootmem_ptr) return; - for_each_online_node(node) - free_bootmem_node(NODE_DATA(node), __pa(dma32_bootmem_ptr), - dma32_bootmem_size); + free_bootmem(__pa(dma32_bootmem_ptr), dma32_bootmem_size); dma32_bootmem_ptr = NULL; dma32_bootmem_size = 0; @@ -357,7 +358,7 @@ int dma_supported(struct device *dev, u64 mask) EXPORT_SYMBOL(dma_supported); /* Allocate DMA memory on node near device */ -noinline struct page * +static noinline struct page * dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order) { int node; diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index aa8ec928caa..021f3c684a6 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -104,7 +104,6 @@ static unsigned long alloc_iommu(struct device *dev, int size) size, base_index, boundary_size, 0); } if (offset != -1) { - set_bit_string(iommu_gart_bitmap, offset, size); next_bit = offset+size; if (next_bit >= iommu_pages) { next_bit = 0; @@ -534,8 +533,8 @@ static __init unsigned read_aperture(struct pci_dev *dev, u32 *size) unsigned aper_size = 0, aper_base_32, aper_order; u64 aper_base; - pci_read_config_dword(dev, 0x94, &aper_base_32); - pci_read_config_dword(dev, 0x90, &aper_order); + pci_read_config_dword(dev, AMD64_GARTAPERTUREBASE, &aper_base_32); + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &aper_order); aper_order = (aper_order >> 1) & 7; aper_base = aper_base_32 & 0x7fff; @@ -549,14 +548,63 @@ static __init unsigned read_aperture(struct pci_dev *dev, u32 *size) return aper_base; } +static void enable_gart_translations(void) +{ + int i; + + for (i = 0; i < num_k8_northbridges; i++) { + struct pci_dev *dev = k8_northbridges[i]; + + enable_gart_translation(dev, __pa(agp_gatt_table)); + } +} + +/* + * If fix_up_north_bridges is set, the north bridges have to be fixed up on + * resume in the same way as they are handled in gart_iommu_hole_init(). + */ +static bool fix_up_north_bridges; +static u32 aperture_order; +static u32 aperture_alloc; + +void set_up_gart_resume(u32 aper_order, u32 aper_alloc) +{ + fix_up_north_bridges = true; + aperture_order = aper_order; + aperture_alloc = aper_alloc; +} + static int gart_resume(struct sys_device *dev) { + printk(KERN_INFO "PCI-DMA: Resuming GART IOMMU\n"); + + if (fix_up_north_bridges) { + int i; + + printk(KERN_INFO "PCI-DMA: Restoring GART aperture settings\n"); + + for (i = 0; i < num_k8_northbridges; i++) { + struct pci_dev *dev = k8_northbridges[i]; + + /* + * Don't enable translations just yet. That is the next + * step. Restore the pre-suspend aperture settings. + */ + pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, + aperture_order << 1); + pci_write_config_dword(dev, AMD64_GARTAPERTUREBASE, + aperture_alloc >> 25); + } + } + + enable_gart_translations(); + return 0; } static int gart_suspend(struct sys_device *dev, pm_message_t state) { - return -EINVAL; + return 0; } static struct sysdev_class gart_sysdev_class = { @@ -614,27 +662,14 @@ static __init int init_k8_gatt(struct agp_kern_info *info) memset(gatt, 0, gatt_size); agp_gatt_table = gatt; - for (i = 0; i < num_k8_northbridges; i++) { - u32 gatt_reg; - u32 ctl; - - dev = k8_northbridges[i]; - gatt_reg = __pa(gatt) >> 12; - gatt_reg <<= 4; - pci_write_config_dword(dev, 0x98, gatt_reg); - pci_read_config_dword(dev, 0x90, &ctl); - - ctl |= 1; - ctl &= ~((1<<4) | (1<<5)); - - pci_write_config_dword(dev, 0x90, ctl); - } + enable_gart_translations(); error = sysdev_class_register(&gart_sysdev_class); if (!error) error = sysdev_register(&device_gart); if (error) panic("Could not register gart_sysdev -- would corrupt data on next suspend"); + flush_gart(); printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n", @@ -677,11 +712,11 @@ void gart_iommu_shutdown(void) u32 ctl; dev = k8_northbridges[i]; - pci_read_config_dword(dev, 0x90, &ctl); + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); - ctl &= ~1; + ctl &= ~GARTEN; - pci_write_config_dword(dev, 0x90, ctl); + pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); } } @@ -788,10 +823,10 @@ void __init gart_iommu_init(void) wbinvd(); /* - * Try to workaround a bug (thanks to BenH) + * Try to workaround a bug (thanks to BenH): * Set unmapped entries to a scratch page instead of 0. * Any prefetches that hit unmapped entries won't get an bus abort - * then. + * then. (P2P bridge may be prefetching on DMA reads). */ scratch = get_zeroed_page(GFP_KERNEL); if (!scratch) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index ba370dc8685..4061d63aabe 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -6,6 +6,7 @@ #include <linux/sched.h> #include <linux/module.h> #include <linux/pm.h> +#include <linux/clockchips.h> struct kmem_cache *task_xstate_cachep; @@ -45,6 +46,76 @@ void arch_task_cache_init(void) SLAB_PANIC, NULL); } +/* + * Idle related variables and functions + */ +unsigned long boot_option_idle_override = 0; +EXPORT_SYMBOL(boot_option_idle_override); + +/* + * Powermanagement idle function, if any.. + */ +void (*pm_idle)(void); +EXPORT_SYMBOL(pm_idle); + +#ifdef CONFIG_X86_32 +/* + * This halt magic was a workaround for ancient floppy DMA + * wreckage. It should be safe to remove. + */ +static int hlt_counter; +void disable_hlt(void) +{ + hlt_counter++; +} +EXPORT_SYMBOL(disable_hlt); + +void enable_hlt(void) +{ + hlt_counter--; +} +EXPORT_SYMBOL(enable_hlt); + +static inline int hlt_use_halt(void) +{ + return (!hlt_counter && boot_cpu_data.hlt_works_ok); +} +#else +static inline int hlt_use_halt(void) +{ + return 1; +} +#endif + +/* + * We use this if we don't have any better + * idle routine.. + */ +void default_idle(void) +{ + if (hlt_use_halt()) { + current_thread_info()->status &= ~TS_POLLING; + /* + * TS_POLLING-cleared state must be visible before we + * test NEED_RESCHED: + */ + smp_mb(); + + if (!need_resched()) + safe_halt(); /* enables interrupts racelessly */ + else + local_irq_enable(); + current_thread_info()->status |= TS_POLLING; + } else { + local_irq_enable(); + /* loop is done by the caller */ + cpu_relax(); + } +} +#ifdef CONFIG_APM_MODULE +EXPORT_SYMBOL(default_idle); +#endif + static void do_nothing(void *unused) { } @@ -122,44 +193,129 @@ static void poll_idle(void) * * idle=mwait overrides this decision and forces the usage of mwait. */ + +#define MWAIT_INFO 0x05 +#define MWAIT_ECX_EXTENDED_INFO 0x01 +#define MWAIT_EDX_C1 0xf0 + static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c) { + u32 eax, ebx, ecx, edx; + if (force_mwait) return 1; - if (c->x86_vendor == X86_VENDOR_AMD) { - switch(c->x86) { - case 0x10: - case 0x11: - return 0; - } - } + if (c->cpuid_level < MWAIT_INFO) + return 0; + + cpuid(MWAIT_INFO, &eax, &ebx, &ecx, &edx); + /* Check, whether EDX has extended info about MWAIT */ + if (!(ecx & MWAIT_ECX_EXTENDED_INFO)) + return 1; + + /* + * edx enumeratios MONITOR/MWAIT extensions. Check, whether + * C1 supports MWAIT + */ + return (edx & MWAIT_EDX_C1); +} + +/* + * Check for AMD CPUs, which have potentially C1E support + */ +static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c) +{ + if (c->x86_vendor != X86_VENDOR_AMD) + return 0; + + if (c->x86 < 0x0F) + return 0; + + /* Family 0x0f models < rev F do not have C1E */ + if (c->x86 == 0x0f && c->x86_model < 0x40) + return 0; + return 1; } -void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) +/* + * C1E aware idle routine. We check for C1E active in the interrupt + * pending message MSR. If we detect C1E, then we handle it the same + * way as C3 power states (local apic timer and TSC stop) + */ +static void c1e_idle(void) { - static int selected; + static cpumask_t c1e_mask = CPU_MASK_NONE; + static int c1e_detected; - if (selected) + if (need_resched()) return; + + if (!c1e_detected) { + u32 lo, hi; + + rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi); + if (lo & K8_INTP_C1E_ACTIVE_MASK) { + c1e_detected = 1; + mark_tsc_unstable("TSC halt in C1E"); + printk(KERN_INFO "System has C1E enabled\n"); + } + } + + if (c1e_detected) { + int cpu = smp_processor_id(); + + if (!cpu_isset(cpu, c1e_mask)) { + cpu_set(cpu, c1e_mask); + /* + * Force broadcast so ACPI can not interfere. Needs + * to run with interrupts enabled as it uses + * smp_function_call. + */ + local_irq_enable(); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE, + &cpu); + printk(KERN_INFO "Switch to broadcast mode on CPU%d\n", + cpu); + local_irq_disable(); + } + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu); + + default_idle(); + + /* + * The switch back from broadcast mode needs to be + * called with interrupts disabled. + */ + local_irq_disable(); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu); + local_irq_enable(); + } else + default_idle(); +} + +void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) +{ #ifdef CONFIG_X86_SMP if (pm_idle == poll_idle && smp_num_siblings > 1) { printk(KERN_WARNING "WARNING: polling idle and HT enabled," " performance may degrade.\n"); } #endif + if (pm_idle) + return; + if (cpu_has(c, X86_FEATURE_MWAIT) && mwait_usable(c)) { /* - * Skip, if setup has overridden idle. * One CPU supports mwait => All CPUs supports mwait */ - if (!pm_idle) { - printk(KERN_INFO "using mwait in idle threads.\n"); - pm_idle = mwait_idle; - } - } - selected = 1; + printk(KERN_INFO "using mwait in idle threads.\n"); + pm_idle = mwait_idle; + } else if (check_c1e_idle(c)) { + printk(KERN_INFO "using C1E aware idle routine\n"); + pm_idle = c1e_idle; + } else + pm_idle = default_idle; } static int __init idle_setup(char *str) diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index e2db9ac5c61..c2a11d77b1b 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -58,11 +58,6 @@ asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); -static int hlt_counter; - -unsigned long boot_option_idle_override = 0; -EXPORT_SYMBOL(boot_option_idle_override); - DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task; EXPORT_PER_CPU_SYMBOL(current_task); @@ -77,55 +72,6 @@ unsigned long thread_saved_pc(struct task_struct *tsk) return ((unsigned long *)tsk->thread.sp)[3]; } -/* - * Powermanagement idle function, if any.. - */ -void (*pm_idle)(void); -EXPORT_SYMBOL(pm_idle); - -void disable_hlt(void) -{ - hlt_counter++; -} - -EXPORT_SYMBOL(disable_hlt); - -void enable_hlt(void) -{ - hlt_counter--; -} - -EXPORT_SYMBOL(enable_hlt); - -/* - * We use this if we don't have any better - * idle routine.. - */ -void default_idle(void) -{ - if (!hlt_counter && boot_cpu_data.hlt_works_ok) { - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we - * test NEED_RESCHED: - */ - smp_mb(); - - if (!need_resched()) - safe_halt(); /* enables interrupts racelessly */ - else - local_irq_enable(); - current_thread_info()->status |= TS_POLLING; - } else { - local_irq_enable(); - /* loop is done by the caller */ - cpu_relax(); - } -} -#ifdef CONFIG_APM_MODULE -EXPORT_SYMBOL(default_idle); -#endif - #ifdef CONFIG_HOTPLUG_CPU #include <asm/nmi.h> /* We don't actually take CPU down, just spin without interrupts. */ @@ -168,24 +114,19 @@ void cpu_idle(void) while (1) { tick_nohz_stop_sched_tick(); while (!need_resched()) { - void (*idle)(void); check_pgt_cache(); rmb(); - idle = pm_idle; if (rcu_pending(cpu)) rcu_check_callbacks(cpu, 0); - if (!idle) - idle = default_idle; - if (cpu_is_offline(cpu)) play_dead(); local_irq_disable(); __get_cpu_var(irq_stat).idle_timestamp = jiffies; - idle(); + pm_idle(); } tick_nohz_restart_sched_tick(); preempt_enable_no_resched(); diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index c6eb5c91e5f..290183e9731 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -56,15 +56,6 @@ asmlinkage extern void ret_from_fork(void); unsigned long kernel_thread_flags = CLONE_VM | CLONE_UNTRACED; -unsigned long boot_option_idle_override = 0; -EXPORT_SYMBOL(boot_option_idle_override); - -/* - * Powermanagement idle function, if any.. - */ -void (*pm_idle)(void); -EXPORT_SYMBOL(pm_idle); - static ATOMIC_NOTIFIER_HEAD(idle_notifier); void idle_notifier_register(struct notifier_block *n) @@ -94,25 +85,6 @@ void exit_idle(void) __exit_idle(); } -/* - * We use this if we don't have any better - * idle routine.. - */ -void default_idle(void) -{ - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we - * test NEED_RESCHED: - */ - smp_mb(); - if (!need_resched()) - safe_halt(); /* enables interrupts racelessly */ - else - local_irq_enable(); - current_thread_info()->status |= TS_POLLING; -} - #ifdef CONFIG_HOTPLUG_CPU DECLARE_PER_CPU(int, cpu_state); @@ -150,12 +122,9 @@ void cpu_idle(void) while (1) { tick_nohz_stop_sched_tick(); while (!need_resched()) { - void (*idle)(void); rmb(); - idle = pm_idle; - if (!idle) - idle = default_idle; + if (cpu_is_offline(smp_processor_id())) play_dead(); /* @@ -165,7 +134,7 @@ void cpu_idle(void) */ local_irq_disable(); enter_idle(); - idle(); + pm_idle(); /* In many cases the interrupt that ended idle has already called exit_idle. But some idle loops can be woken up without interrupt. */ diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index d89a648fe71..79bdcd11c66 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -65,6 +65,7 @@ static enum { ICH_FORCE_HPET_RESUME, VT8237_FORCE_HPET_RESUME, NVIDIA_FORCE_HPET_RESUME, + ATI_FORCE_HPET_RESUME, } force_hpet_resume_type; static void __iomem *rcba_base; @@ -158,6 +159,8 @@ static void ich_force_enable_hpet(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, ich_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, + ich_force_enable_hpet); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, ich_force_enable_hpet); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, @@ -174,6 +177,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, static struct pci_dev *cached_dev; +static void hpet_print_force_info(void) +{ + printk(KERN_INFO "HPET not enabled in BIOS. " + "You might try hpet=force boot option\n"); +} + static void old_ich_force_hpet_resume(void) { u32 val; @@ -253,6 +262,8 @@ static void old_ich_force_enable_hpet_user(struct pci_dev *dev) { if (hpet_force_user) old_ich_force_enable_hpet(dev); + else + hpet_print_force_info(); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, @@ -290,8 +301,13 @@ static void vt8237_force_enable_hpet(struct pci_dev *dev) { u32 uninitialized_var(val); - if (!hpet_force_user || hpet_address || force_hpet_address) + if (hpet_address || force_hpet_address) + return; + + if (!hpet_force_user) { + hpet_print_force_info(); return; + } pci_read_config_dword(dev, 0x68, &val); /* @@ -330,6 +346,36 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, vt8237_force_enable_hpet); +static void ati_force_hpet_resume(void) +{ + pci_write_config_dword(cached_dev, 0x14, 0xfed00000); + printk(KERN_DEBUG "Force enabled HPET at resume\n"); +} + +static void ati_force_enable_hpet(struct pci_dev *dev) +{ + u32 uninitialized_var(val); + + if (hpet_address || force_hpet_address) + return; + + if (!hpet_force_user) { + hpet_print_force_info(); + return; + } + + pci_write_config_dword(dev, 0x14, 0xfed00000); + pci_read_config_dword(dev, 0x14, &val); + force_hpet_address = val; + force_hpet_resume_type = ATI_FORCE_HPET_RESUME; + dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n", + force_hpet_address); + cached_dev = dev; + return; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS, + ati_force_enable_hpet); + /* * Undocumented chipset feature taken from LinuxBIOS. */ @@ -343,8 +389,13 @@ static void nvidia_force_enable_hpet(struct pci_dev *dev) { u32 uninitialized_var(val); - if (!hpet_force_user || hpet_address || force_hpet_address) + if (hpet_address || force_hpet_address) + return; + + if (!hpet_force_user) { + hpet_print_force_info(); return; + } pci_write_config_dword(dev, 0x44, 0xfed00001); pci_read_config_dword(dev, 0x44, &val); @@ -397,6 +448,9 @@ void force_hpet_resume(void) case NVIDIA_FORCE_HPET_RESUME: nvidia_force_hpet_resume(); return; + case ATI_FORCE_HPET_RESUME: + ati_force_hpet_resume(); + return; default: break; } diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index f6be7d5f82f..f8a62160e15 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -27,7 +27,7 @@ void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); -static long no_idt[3]; +static const struct desc_ptr no_idt = {}; static int reboot_mode; enum reboot_type reboot_type = BOOT_KBD; int reboot_force; @@ -201,15 +201,15 @@ core_initcall(reboot_init); controller to pulse the CPU reset line, which is more thorough, but doesn't work with at least one type of 486 motherboard. It is easy to stop this code working; hence the copious comments. */ -static unsigned long long +static const unsigned long long real_mode_gdt_entries [3] = { 0x0000000000000000ULL, /* Null descriptor */ - 0x00009a000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */ - 0x000092000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */ + 0x00009b000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */ + 0x000093000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */ }; -static struct desc_ptr +static const struct desc_ptr real_mode_gdt = { sizeof (real_mode_gdt_entries) - 1, (long)real_mode_gdt_entries }, real_mode_idt = { 0x3ff, 0 }; @@ -231,7 +231,7 @@ real_mode_idt = { 0x3ff, 0 }; More could be done here to set up the registers as if a CPU reset had occurred; hopefully real BIOSs don't assume much. */ -static unsigned char real_mode_switch [] = +static const unsigned char real_mode_switch [] = { 0x66, 0x0f, 0x20, 0xc0, /* movl %cr0,%eax */ 0x66, 0x83, 0xe0, 0x11, /* andl $0x00000011,%eax */ @@ -245,7 +245,7 @@ static unsigned char real_mode_switch [] = 0x24, 0x10, /* f: andb $0x10,al */ 0x66, 0x0f, 0x22, 0xc0 /* movl %eax,%cr0 */ }; -static unsigned char jump_to_bios [] = +static const unsigned char jump_to_bios [] = { 0xea, 0x00, 0x00, 0xff, 0xff /* ljmp $0xffff,$0x0000 */ }; @@ -255,7 +255,7 @@ static unsigned char jump_to_bios [] = * specified by the code and length parameters. * We assume that length will aways be less that 100! */ -void machine_real_restart(unsigned char *code, int length) +void machine_real_restart(const unsigned char *code, int length) { local_irq_disable(); @@ -368,7 +368,7 @@ static void native_machine_emergency_restart(void) } case BOOT_TRIPLE: - load_idt((const struct desc_ptr *)&no_idt); + load_idt(&no_idt); __asm__ __volatile__("int3"); reboot_type = BOOT_KBD; diff --git a/arch/x86/kernel/reboot_fixups_32.c b/arch/x86/kernel/reboot_fixups_32.c index dec0b5ec25c..61a837743fe 100644 --- a/arch/x86/kernel/reboot_fixups_32.c +++ b/arch/x86/kernel/reboot_fixups_32.c @@ -49,7 +49,7 @@ struct device_fixup { void (*reboot_fixup)(struct pci_dev *); }; -static struct device_fixup fixups_table[] = { +static const struct device_fixup fixups_table[] = { { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset }, { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset }, { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset }, @@ -64,7 +64,7 @@ static struct device_fixup fixups_table[] = { */ void mach_reboot_fixups(void) { - struct device_fixup *cur; + const struct device_fixup *cur; struct pci_dev *dev; int i; diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 6dff1286ad8..545440e471b 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -71,6 +71,7 @@ #include <asm/topology.h> #include <asm/trampoline.h> #include <asm/pat.h> +#include <asm/mmconfig.h> #include <mach_apic.h> #ifdef CONFIG_PARAVIRT @@ -79,6 +80,8 @@ #define ARCH_SETUP #endif +#include "cpu/cpu.h" + /* * Machine setup.. */ @@ -95,8 +98,6 @@ int bootloader_type; unsigned long saved_video_mode; -int force_mwait __cpuinitdata; - /* * Early DMI memory */ @@ -118,7 +119,7 @@ EXPORT_SYMBOL_GPL(edid_info); extern int root_mountflags; -char __initdata command_line[COMMAND_LINE_SIZE]; +static char __initdata command_line[COMMAND_LINE_SIZE]; static struct resource standard_io_resources[] = { { .name = "dma1", .start = 0x00, .end = 0x1f, @@ -164,6 +165,7 @@ static struct resource bss_resource = { .flags = IORESOURCE_RAM, }; +static void __init early_cpu_init(void); static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c); #ifdef CONFIG_PROC_VMCORE @@ -293,18 +295,6 @@ static void __init parse_setup_data(void) } } -#ifdef CONFIG_PCI_MMCONFIG -extern void __cpuinit fam10h_check_enable_mmcfg(void); -extern void __init check_enable_amd_mmconf_dmi(void); -#else -void __cpuinit fam10h_check_enable_mmcfg(void) -{ -} -void __init check_enable_amd_mmconf_dmi(void) -{ -} -#endif - /* * setup_arch - architecture-specific boot-time initializations * @@ -352,6 +342,7 @@ void __init setup_arch(char **cmdline_p) bss_resource.start = virt_to_phys(&__bss_start); bss_resource.end = virt_to_phys(&__bss_stop)-1; + early_cpu_init(); early_identify_cpu(&boot_cpu_data); strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); @@ -537,7 +528,20 @@ void __init setup_arch(char **cmdline_p) check_enable_amd_mmconf_dmi(); } -static int __cpuinit get_model_name(struct cpuinfo_x86 *c) +struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {}; + +static void __cpuinit default_init(struct cpuinfo_x86 *c) +{ + display_cacheinfo(c); +} + +static struct cpu_dev __cpuinitdata default_cpu = { + .c_init = default_init, + .c_vendor = "Unknown", +}; +static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu; + +int __cpuinit get_model_name(struct cpuinfo_x86 *c) { unsigned int *v; @@ -553,7 +557,7 @@ static int __cpuinit get_model_name(struct cpuinfo_x86 *c) } -static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) +void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) { unsigned int n, dummy, eax, ebx, ecx, edx; @@ -585,228 +589,6 @@ static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) } } -#ifdef CONFIG_NUMA -static int __cpuinit nearby_node(int apicid) -{ - int i, node; - - for (i = apicid - 1; i >= 0; i--) { - node = apicid_to_node[i]; - if (node != NUMA_NO_NODE && node_online(node)) - return node; - } - for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { - node = apicid_to_node[i]; - if (node != NUMA_NO_NODE && node_online(node)) - return node; - } - return first_node(node_online_map); /* Shouldn't happen */ -} -#endif - -/* - * On a AMD dual core setup the lower bits of the APIC id distingush the cores. - * Assumes number of cores is a power of two. - */ -static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - unsigned bits; -#ifdef CONFIG_NUMA - int cpu = smp_processor_id(); - int node = 0; - unsigned apicid = hard_smp_processor_id(); -#endif - bits = c->x86_coreid_bits; - - /* Low order bits define the core id (index of core in socket) */ - c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); - /* Convert the initial APIC ID into the socket ID */ - c->phys_proc_id = c->initial_apicid >> bits; - -#ifdef CONFIG_NUMA - node = c->phys_proc_id; - if (apicid_to_node[apicid] != NUMA_NO_NODE) - node = apicid_to_node[apicid]; - if (!node_online(node)) { - /* Two possibilities here: - - The CPU is missing memory and no node was created. - In that case try picking one from a nearby CPU - - The APIC IDs differ from the HyperTransport node IDs - which the K8 northbridge parsing fills in. - Assume they are all increased by a constant offset, - but in the same order as the HT nodeids. - If that doesn't result in a usable node fall back to the - path for the previous case. */ - - int ht_nodeid = c->initial_apicid; - - if (ht_nodeid >= 0 && - apicid_to_node[ht_nodeid] != NUMA_NO_NODE) - node = apicid_to_node[ht_nodeid]; - /* Pick a nearby node */ - if (!node_online(node)) - node = nearby_node(apicid); - } - numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); -#endif -#endif -} - -static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - unsigned bits, ecx; - - /* Multi core CPU? */ - if (c->extended_cpuid_level < 0x80000008) - return; - - ecx = cpuid_ecx(0x80000008); - - c->x86_max_cores = (ecx & 0xff) + 1; - - /* CPU telling us the core id bits shift? */ - bits = (ecx >> 12) & 0xF; - - /* Otherwise recompute */ - if (bits == 0) { - while ((1 << bits) < c->x86_max_cores) - bits++; - } - - c->x86_coreid_bits = bits; - -#endif -} - -#define ENABLE_C1E_MASK 0x18000000 -#define CPUID_PROCESSOR_SIGNATURE 1 -#define CPUID_XFAM 0x0ff00000 -#define CPUID_XFAM_K8 0x00000000 -#define CPUID_XFAM_10H 0x00100000 -#define CPUID_XFAM_11H 0x00200000 -#define CPUID_XMOD 0x000f0000 -#define CPUID_XMOD_REV_F 0x00040000 - -/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */ -static __cpuinit int amd_apic_timer_broken(void) -{ - u32 lo, hi, eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - - switch (eax & CPUID_XFAM) { - case CPUID_XFAM_K8: - if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F) - break; - case CPUID_XFAM_10H: - case CPUID_XFAM_11H: - rdmsr(MSR_K8_ENABLE_C1E, lo, hi); - if (lo & ENABLE_C1E_MASK) - return 1; - break; - default: - /* err on the side of caution */ - return 1; - } - return 0; -} - -static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) -{ - early_init_amd_mc(c); - - /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */ - if (c->x86_power & (1<<8)) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); -} - -static void __cpuinit init_amd(struct cpuinfo_x86 *c) -{ - unsigned level; - -#ifdef CONFIG_SMP - unsigned long value; - - /* - * Disable TLB flush filter by setting HWCR.FFDIS on K8 - * bit 6 of msr C001_0015 - * - * Errata 63 for SH-B3 steppings - * Errata 122 for all steppings (F+ have it disabled by default) - */ - if (c->x86 == 15) { - rdmsrl(MSR_K8_HWCR, value); - value |= 1 << 6; - wrmsrl(MSR_K8_HWCR, value); - } -#endif - - /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; - 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ - clear_cpu_cap(c, 0*32+31); - - /* On C+ stepping K8 rep microcode works well for copy/memset */ - level = cpuid_eax(1); - if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) || - level >= 0x0f58)) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - if (c->x86 == 0x10 || c->x86 == 0x11) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - - /* Enable workaround for FXSAVE leak */ - if (c->x86 >= 6) - set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK); - - level = get_model_name(c); - if (!level) { - switch (c->x86) { - case 15: - /* Should distinguish Models here, but this is only - a fallback anyways. */ - strcpy(c->x86_model_id, "Hammer"); - break; - } - } - display_cacheinfo(c); - - /* Multi core CPU? */ - if (c->extended_cpuid_level >= 0x80000008) - amd_detect_cmp(c); - - if (c->extended_cpuid_level >= 0x80000006 && - (cpuid_edx(0x80000006) & 0xf000)) - num_cache_leaves = 4; - else - num_cache_leaves = 3; - - if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x11) - set_cpu_cap(c, X86_FEATURE_K8); - - /* MFENCE stops RDTSC speculation */ - set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); - - if (c->x86 == 0x10) - fam10h_check_enable_mmcfg(); - - if (amd_apic_timer_broken()) - disable_apic_timer = 1; - - if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { - unsigned long long tseg; - - /* - * Split up direct mapping around the TSEG SMM area. - * Don't do it for gbpages because there seems very little - * benefit in doing so. - */ - if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg) && - (tseg >> PMD_SHIFT) < (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT))) - set_memory_4k((unsigned long)__va(tseg), 1); - } -} - void __cpuinit detect_ht(struct cpuinfo_x86 *c) { #ifdef CONFIG_SMP @@ -857,135 +639,59 @@ out: #endif } -/* - * find out the number of processor cores on the die - */ -static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) -{ - unsigned int eax, t; - - if (c->cpuid_level < 4) - return 1; - - cpuid_count(4, 0, &eax, &t, &t, &t); - - if (eax & 0x1f) - return ((eax >> 26) + 1); - else - return 1; -} - -static void __cpuinit srat_detect_node(void) -{ -#ifdef CONFIG_NUMA - unsigned node; - int cpu = smp_processor_id(); - int apicid = hard_smp_processor_id(); - - /* Don't do the funky fallback heuristics the AMD version employs - for now. */ - node = apicid_to_node[apicid]; - if (node == NUMA_NO_NODE || !node_online(node)) - node = first_node(node_online_map); - numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); -#endif -} - -static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) -{ - if ((c->x86 == 0xf && c->x86_model >= 0x03) || - (c->x86 == 0x6 && c->x86_model >= 0x0e)) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); -} - -static void __cpuinit init_intel(struct cpuinfo_x86 *c) +static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) { - /* Cache sizes */ - unsigned n; - - init_intel_cacheinfo(c); - if (c->cpuid_level > 9) { - unsigned eax = cpuid_eax(10); - /* Check for version and the number of counters */ - if ((eax & 0xff) && (((eax>>8) & 0xff) > 1)) - set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON); + char *v = c->x86_vendor_id; + int i; + static int printed; + + for (i = 0; i < X86_VENDOR_NUM; i++) { + if (cpu_devs[i]) { + if (!strcmp(v, cpu_devs[i]->c_ident[0]) || + (cpu_devs[i]->c_ident[1] && + !strcmp(v, cpu_devs[i]->c_ident[1]))) { + c->x86_vendor = i; + this_cpu = cpu_devs[i]; + return; + } + } } - - if (cpu_has_ds) { - unsigned int l1, l2; - rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); - if (!(l1 & (1<<11))) - set_cpu_cap(c, X86_FEATURE_BTS); - if (!(l1 & (1<<12))) - set_cpu_cap(c, X86_FEATURE_PEBS); + if (!printed) { + printed++; + printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n"); + printk(KERN_ERR "CPU: Your system may be unstable.\n"); } - - - if (cpu_has_bts) - ds_init_intel(c); - - n = c->extended_cpuid_level; - if (n >= 0x80000008) { - unsigned eax = cpuid_eax(0x80000008); - c->x86_virt_bits = (eax >> 8) & 0xff; - c->x86_phys_bits = eax & 0xff; - /* CPUID workaround for Intel 0F34 CPU */ - if (c->x86_vendor == X86_VENDOR_INTEL && - c->x86 == 0xF && c->x86_model == 0x3 && - c->x86_mask == 0x4) - c->x86_phys_bits = 36; - } - - if (c->x86 == 15) - c->x86_cache_alignment = c->x86_clflush_size * 2; - if (c->x86 == 6) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); - c->x86_max_cores = intel_num_cpu_cores(c); - - srat_detect_node(); -} - -static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) -{ - if (c->x86 == 0x6 && c->x86_model >= 0xf) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); + c->x86_vendor = X86_VENDOR_UNKNOWN; } -static void __cpuinit init_centaur(struct cpuinfo_x86 *c) +static void __init early_cpu_support_print(void) { - /* Cache sizes */ - unsigned n; + int i,j; + struct cpu_dev *cpu_devx; - n = c->extended_cpuid_level; - if (n >= 0x80000008) { - unsigned eax = cpuid_eax(0x80000008); - c->x86_virt_bits = (eax >> 8) & 0xff; - c->x86_phys_bits = eax & 0xff; - } - - if (c->x86 == 0x6 && c->x86_model >= 0xf) { - c->x86_cache_alignment = c->x86_clflush_size * 2; - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); - set_cpu_cap(c, X86_FEATURE_REP_GOOD); + printk("KERNEL supported cpus:\n"); + for (i = 0; i < X86_VENDOR_NUM; i++) { + cpu_devx = cpu_devs[i]; + if (!cpu_devx) + continue; + for (j = 0; j < 2; j++) { + if (!cpu_devx->c_ident[j]) + continue; + printk(" %s %s\n", cpu_devx->c_vendor, + cpu_devx->c_ident[j]); + } } - set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); } -static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) +static void __init early_cpu_init(void) { - char *v = c->x86_vendor_id; + struct cpu_vendor_dev *cvdev; - if (!strcmp(v, "AuthenticAMD")) - c->x86_vendor = X86_VENDOR_AMD; - else if (!strcmp(v, "GenuineIntel")) - c->x86_vendor = X86_VENDOR_INTEL; - else if (!strcmp(v, "CentaurHauls")) - c->x86_vendor = X86_VENDOR_CENTAUR; - else - c->x86_vendor = X86_VENDOR_UNKNOWN; + for (cvdev = __x86cpuvendor_start ; + cvdev < __x86cpuvendor_end ; + cvdev++) + cpu_devs[cvdev->vendor] = cvdev->cpu_dev; + early_cpu_support_print(); } /* Do some early cpuid on the boot CPU to get some parameter that are @@ -1066,17 +772,9 @@ static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c) if (c->extended_cpuid_level >= 0x80000007) c->x86_power = cpuid_edx(0x80000007); - switch (c->x86_vendor) { - case X86_VENDOR_AMD: - early_init_amd(c); - break; - case X86_VENDOR_INTEL: - early_init_intel(c); - break; - case X86_VENDOR_CENTAUR: - early_init_centaur(c); - break; - } + if (c->x86_vendor != X86_VENDOR_UNKNOWN && + cpu_devs[c->x86_vendor]->c_early_init) + cpu_devs[c->x86_vendor]->c_early_init(c); validate_pat_support(c); } @@ -1104,24 +802,8 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c) * At the end of this section, c->x86_capability better * indicate the features this CPU genuinely supports! */ - switch (c->x86_vendor) { - case X86_VENDOR_AMD: - init_amd(c); - break; - - case X86_VENDOR_INTEL: - init_intel(c); - break; - - case X86_VENDOR_CENTAUR: - init_centaur(c); - break; - - case X86_VENDOR_UNKNOWN: - default: - display_cacheinfo(c); - break; - } + if (this_cpu->c_init) + this_cpu->c_init(c); detect_ht(c); diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 3e1cecedde4..f2b66675629 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -59,7 +59,6 @@ #include <asm/pgtable.h> #include <asm/tlbflush.h> #include <asm/mtrr.h> -#include <asm/nmi.h> #include <asm/vmi.h> #include <asm/genapic.h> #include <linux/mc146818rtc.h> @@ -1157,9 +1156,11 @@ static int __init smp_sanity_check(unsigned max_cpus) * If SMP should be disabled, then really disable it! */ if (!max_cpus) { - printk(KERN_INFO "SMP mode deactivated," - "forcing use of dummy APIC emulation.\n"); + printk(KERN_INFO "SMP mode deactivated.\n"); smpboot_clear_io_apic(); + + localise_nmi_watchdog(); + #ifdef CONFIG_X86_32 connect_bsp_APIC(); #endif diff --git a/arch/x86/kernel/sys_i386_32.c b/arch/x86/kernel/sys_i386_32.c index d2ab52cc1d6..7066cb855a6 100644 --- a/arch/x86/kernel/sys_i386_32.c +++ b/arch/x86/kernel/sys_i386_32.c @@ -19,8 +19,8 @@ #include <linux/utsname.h> #include <linux/ipc.h> -#include <asm/uaccess.h> -#include <asm/unistd.h> +#include <linux/uaccess.h> +#include <linux/unistd.h> asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, @@ -103,7 +103,7 @@ asmlinkage int old_select(struct sel_arg_struct __user *arg) * * This is really horribly ugly. */ -asmlinkage int sys_ipc (uint call, int first, int second, +asmlinkage int sys_ipc(uint call, int first, int second, int third, void __user *ptr, long fifth) { int version, ret; @@ -113,24 +113,24 @@ asmlinkage int sys_ipc (uint call, int first, int second, switch (call) { case SEMOP: - return sys_semtimedop (first, (struct sembuf __user *)ptr, second, NULL); + return sys_semtimedop(first, (struct sembuf __user *)ptr, second, NULL); case SEMTIMEDOP: return sys_semtimedop(first, (struct sembuf __user *)ptr, second, (const struct timespec __user *)fifth); case SEMGET: - return sys_semget (first, second, third); + return sys_semget(first, second, third); case SEMCTL: { union semun fourth; if (!ptr) return -EINVAL; if (get_user(fourth.__pad, (void __user * __user *) ptr)) return -EFAULT; - return sys_semctl (first, second, third, fourth); + return sys_semctl(first, second, third, fourth); } case MSGSND: - return sys_msgsnd (first, (struct msgbuf __user *) ptr, + return sys_msgsnd(first, (struct msgbuf __user *) ptr, second, third); case MSGRCV: switch (version) { @@ -138,45 +138,45 @@ asmlinkage int sys_ipc (uint call, int first, int second, struct ipc_kludge tmp; if (!ptr) return -EINVAL; - + if (copy_from_user(&tmp, - (struct ipc_kludge __user *) ptr, - sizeof (tmp))) + (struct ipc_kludge __user *) ptr, + sizeof(tmp))) return -EFAULT; - return sys_msgrcv (first, tmp.msgp, second, + return sys_msgrcv(first, tmp.msgp, second, tmp.msgtyp, third); } default: - return sys_msgrcv (first, + return sys_msgrcv(first, (struct msgbuf __user *) ptr, second, fifth, third); } case MSGGET: - return sys_msgget ((key_t) first, second); + return sys_msgget((key_t) first, second); case MSGCTL: - return sys_msgctl (first, second, (struct msqid_ds __user *) ptr); + return sys_msgctl(first, second, (struct msqid_ds __user *) ptr); case SHMAT: switch (version) { default: { ulong raddr; - ret = do_shmat (first, (char __user *) ptr, second, &raddr); + ret = do_shmat(first, (char __user *) ptr, second, &raddr); if (ret) return ret; - return put_user (raddr, (ulong __user *) third); + return put_user(raddr, (ulong __user *) third); } case 1: /* iBCS2 emulator entry point */ if (!segment_eq(get_fs(), get_ds())) return -EINVAL; /* The "(ulong *) third" is valid _only_ because of the kernel segment thing */ - return do_shmat (first, (char __user *) ptr, second, (ulong *) third); + return do_shmat(first, (char __user *) ptr, second, (ulong *) third); } - case SHMDT: - return sys_shmdt ((char __user *)ptr); + case SHMDT: + return sys_shmdt((char __user *)ptr); case SHMGET: - return sys_shmget (first, second, third); + return sys_shmget(first, second, third); case SHMCTL: - return sys_shmctl (first, second, + return sys_shmctl(first, second, (struct shmid_ds __user *) ptr); default: return -ENOSYS; @@ -186,28 +186,28 @@ asmlinkage int sys_ipc (uint call, int first, int second, /* * Old cruft */ -asmlinkage int sys_uname(struct old_utsname __user * name) +asmlinkage int sys_uname(struct old_utsname __user *name) { int err; if (!name) return -EFAULT; down_read(&uts_sem); - err = copy_to_user(name, utsname(), sizeof (*name)); + err = copy_to_user(name, utsname(), sizeof(*name)); up_read(&uts_sem); - return err?-EFAULT:0; + return err? -EFAULT:0; } -asmlinkage int sys_olduname(struct oldold_utsname __user * name) +asmlinkage int sys_olduname(struct oldold_utsname __user *name) { int error; if (!name) return -EFAULT; - if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname))) + if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname))) return -EFAULT; - - down_read(&uts_sem); - + + down_read(&uts_sem); + error = __copy_to_user(&name->sysname, &utsname()->sysname, __OLD_UTS_LEN); error |= __put_user(0, name->sysname + __OLD_UTS_LEN); @@ -223,9 +223,9 @@ asmlinkage int sys_olduname(struct oldold_utsname __user * name) error |= __copy_to_user(&name->machine, &utsname()->machine, __OLD_UTS_LEN); error |= __put_user(0, name->machine + __OLD_UTS_LEN); - + up_read(&uts_sem); - + error = error ? -EFAULT : 0; return error; @@ -241,6 +241,6 @@ int kernel_execve(const char *filename, char *const argv[], char *const envp[]) long __res; asm volatile ("push %%ebx ; movl %2,%%ebx ; int $0x80 ; pop %%ebx" : "=a" (__res) - : "0" (__NR_execve),"ri" (filename),"c" (argv), "d" (envp) : "memory"); + : "0" (__NR_execve), "ri" (filename), "c" (argv), "d" (envp) : "memory"); return __res; } diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c index 2ff21f39893..5f29f12da50 100644 --- a/arch/x86/kernel/time_32.c +++ b/arch/x86/kernel/time_32.c @@ -84,8 +84,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id) if (timer_ack) { /* * Subtle, when I/O APICs are used we have to ack timer IRQ - * manually to reset the IRR bit for do_slow_gettimeoffset(). - * This will also deassert NMI lines for the watchdog if run + * manually to deassert NMI lines for the watchdog if run * on an 82489DX-based system. */ spin_lock(&i8259A_lock); diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c index adff76ea97c..ec6d3b2130c 100644 --- a/arch/x86/kernel/traps_64.c +++ b/arch/x86/kernel/traps_64.c @@ -71,7 +71,6 @@ asmlinkage void general_protection(void); asmlinkage void page_fault(void); asmlinkage void coprocessor_error(void); asmlinkage void simd_coprocessor_error(void); -asmlinkage void reserved(void); asmlinkage void alignment_check(void); asmlinkage void machine_check(void); asmlinkage void spurious_interrupt_bug(void); @@ -702,12 +701,10 @@ DO_ERROR_INFO( 0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip) DO_ERROR( 4, SIGSEGV, "overflow", overflow) DO_ERROR( 5, SIGSEGV, "bounds", bounds) DO_ERROR_INFO( 6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip) -DO_ERROR( 7, SIGSEGV, "device not available", device_not_available) DO_ERROR( 9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun) DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS) DO_ERROR(11, SIGBUS, "segment not present", segment_not_present) DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0) -DO_ERROR(18, SIGSEGV, "reserved", reserved) /* Runs on IST stack */ asmlinkage void do_stack_segment(struct pt_regs *regs, long error_code) diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c index 65b70637ad9..774a5a83c29 100644 --- a/arch/x86/kernel/tsc_32.c +++ b/arch/x86/kernel/tsc_32.c @@ -286,7 +286,6 @@ core_initcall(cpufreq_tsc); /* clock source code */ -static unsigned long current_tsc_khz; static struct clocksource clocksource_tsc; /* @@ -439,9 +438,8 @@ void __init tsc_init(void) unsynchronized_tsc(); check_geode_tsc_reliable(); - current_tsc_khz = tsc_khz; - clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz, - clocksource_tsc.shift); + clocksource_tsc.mult = clocksource_khz2mult(tsc_khz, + clocksource_tsc.shift); /* lower the rating if we already know its unstable: */ if (check_tsc_unstable()) { clocksource_tsc.rating = 0; diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c index 1784b8077a1..9898fb01edf 100644 --- a/arch/x86/kernel/tsc_64.c +++ b/arch/x86/kernel/tsc_64.c @@ -242,7 +242,7 @@ void __init tsc_calibrate(void) if (hpet) { printk(KERN_INFO "TSC calibrated against HPET\n"); if (hpet2 < hpet1) - hpet2 += 0x100000000; + hpet2 += 0x100000000UL; hpet2 -= hpet1; tsc1 = (hpet2 * hpet_readl(HPET_PERIOD)) / 1000000; } else { diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S index ce5ed083a1e..2674f579627 100644 --- a/arch/x86/kernel/vmlinux_32.lds.S +++ b/arch/x86/kernel/vmlinux_32.lds.S @@ -60,13 +60,6 @@ SECTIONS BUG_TABLE :text - . = ALIGN(4); - .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { - __tracedata_start = .; - *(.tracedata) - __tracedata_end = .; - } - RODATA /* writeable */ diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S index fad3674b06a..fd246e22fe6 100644 --- a/arch/x86/kernel/vmlinux_64.lds.S +++ b/arch/x86/kernel/vmlinux_64.lds.S @@ -53,13 +53,6 @@ SECTIONS RODATA - . = ALIGN(4); - .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { - __tracedata_start = .; - *(.tracedata) - __tracedata_end = .; - } - . = ALIGN(PAGE_SIZE); /* Align data segment to page size boundary */ /* Data */ .data : AT(ADDR(.data) - LOAD_OFFSET) { @@ -177,6 +170,7 @@ SECTIONS *(.con_initcall.init) } __con_initcall_end = .; + . = ALIGN(16); __x86cpuvendor_start = .; .x86cpuvendor.init : AT(ADDR(.x86cpuvendor.init) - LOAD_OFFSET) { *(.x86cpuvendor.init) diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c index ba8c0b75ab0..0c029e8959c 100644 --- a/arch/x86/kernel/vsmp_64.c +++ b/arch/x86/kernel/vsmp_64.c @@ -15,9 +15,12 @@ #include <linux/init.h> #include <linux/pci_ids.h> #include <linux/pci_regs.h> + +#include <asm/apic.h> #include <asm/pci-direct.h> #include <asm/io.h> #include <asm/paravirt.h> +#include <asm/setup.h> #if defined CONFIG_PCI && defined CONFIG_PARAVIRT /* diff --git a/arch/x86/math-emu/reg_constant.c b/arch/x86/math-emu/reg_constant.c index 04869e64b18..00548354912 100644 --- a/arch/x86/math-emu/reg_constant.c +++ b/arch/x86/math-emu/reg_constant.c @@ -16,8 +16,8 @@ #include "reg_constant.h" #include "control_w.h" -#define MAKE_REG(s,e,l,h) { l, h, \ - ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) } +#define MAKE_REG(s, e, l, h) { l, h, \ + ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) } FPU_REG const CONST_1 = MAKE_REG(POS, 0, 0x00000000, 0x80000000); #if 0 @@ -40,7 +40,7 @@ FPU_REG const CONST_PI2extra = MAKE_REG(NEG, -66, FPU_REG const CONST_Z = MAKE_REG(POS, EXP_UNDER, 0x0, 0x0); /* Only the sign and significand (and tag) are used in internal NaNs */ -/* The 80486 never generates one of these +/* The 80486 never generates one of these FPU_REG const CONST_SNAN = MAKE_REG(POS, EXP_OVER, 0x00000001, 0x80000000); */ /* This is the real indefinite QNaN */ @@ -49,7 +49,7 @@ FPU_REG const CONST_QNaN = MAKE_REG(NEG, EXP_OVER, 0x00000000, 0xC0000000); /* Only the sign (and tag) is used in internal infinities */ FPU_REG const CONST_INF = MAKE_REG(POS, EXP_OVER, 0x00000000, 0x80000000); -static void fld_const(FPU_REG const *c, int adj, u_char tag) +static void fld_const(FPU_REG const * c, int adj, u_char tag) { FPU_REG *st_new_ptr; diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index 914ccf98368..8b4eac0ca07 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -156,7 +156,7 @@ static void __init propagate_e820_map_node(int nid) */ static void __init allocate_pgdat(int nid) { - if (nid && node_has_online_mem(nid)) + if (nid && node_has_online_mem(nid) && node_remap_start_vaddr[nid]) NODE_DATA(nid) = (pg_data_t *)node_remap_start_vaddr[nid]; else { NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(min_low_pfn)); @@ -164,16 +164,13 @@ static void __init allocate_pgdat(int nid) } } -#ifdef CONFIG_DISCONTIGMEM /* - * In the discontig memory model, a portion of the kernel virtual area (KVA) - * is reserved and portions of nodes are mapped using it. This is to allow - * node-local memory to be allocated for structures that would normally require - * ZONE_NORMAL. The memory is allocated with alloc_remap() and callers - * should be prepared to allocate from the bootmem allocator instead. This KVA - * mechanism is incompatible with SPARSEMEM as it makes assumptions about the - * layout of memory that are broken if alloc_remap() succeeds for some of the - * map and fails for others + * In the DISCONTIGMEM and SPARSEMEM memory model, a portion of the kernel + * virtual address space (KVA) is reserved and portions of nodes are mapped + * using it. This is to allow node-local memory to be allocated for + * structures that would normally require ZONE_NORMAL. The memory is + * allocated with alloc_remap() and callers should be prepared to allocate + * from the bootmem allocator instead. */ static unsigned long node_remap_start_pfn[MAX_NUMNODES]; static void *node_remap_end_vaddr[MAX_NUMNODES]; @@ -290,25 +287,6 @@ static void init_remap_allocator(int nid) (ulong) pfn_to_kaddr(highstart_pfn + node_remap_offset[nid] + node_remap_size[nid])); } -#else -void *alloc_remap(int nid, unsigned long size) -{ - return NULL; -} - -static unsigned long calculate_numa_remap_pages(void) -{ - return 0; -} - -static void init_remap_allocator(int nid) -{ -} - -void __init remap_numa_kva(void) -{ -} -#endif /* CONFIG_DISCONTIGMEM */ extern void setup_bootmem_allocator(void); unsigned long __init setup_memory(void) @@ -476,3 +454,21 @@ int memory_add_physaddr_to_nid(u64 addr) EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); #endif + +#if defined(CONFIG_ACPI_NUMA) && !defined(CONFIG_HAVE_ARCH_PARSE_SRAT) +/* + * Dummy on 32-bit, for now: + */ +void __init acpi_numa_slit_init(struct acpi_table_slit *slit) +{ +} + +void __init +acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) +{ +} + +void __init acpi_numa_arch_fixup(void) +{ +} +#endif diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 8bcb6f40ccb..1e64795714c 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -55,11 +55,7 @@ static inline int notify_page_fault(struct pt_regs *regs) int ret = 0; /* kprobe_running() needs smp_processor_id() */ -#ifdef CONFIG_X86_32 if (!user_mode_vm(regs)) { -#else - if (!user_mode(regs)) { -#endif preempt_disable(); if (kprobe_running() && kprobe_fault_handler(regs, 14)) ret = 1; diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index 0269ac230bf..d71be0eb013 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -576,17 +576,6 @@ void __init mem_init(void) #endif bad_ppro = ppro_with_ram_bug(); -#ifdef CONFIG_HIGHMEM - /* check that fixmap and pkmap do not overlap */ - if (PKMAP_BASE + LAST_PKMAP*PAGE_SIZE >= FIXADDR_START) { - printk(KERN_ERR - "fixmap and kmap areas overlap - this will crash\n"); - printk(KERN_ERR "pkstart: %lxh pkend: %lxh fixstart %lxh\n", - PKMAP_BASE, PKMAP_BASE + LAST_PKMAP*PAGE_SIZE, - FIXADDR_START); - BUG(); - } -#endif /* this will put all low memory onto the freelists */ totalram_pages += free_all_bootmem(); @@ -619,7 +608,6 @@ void __init mem_init(void) (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)) ); -#if 1 /* double-sanity-check paranoia */ printk(KERN_INFO "virtual kernel memory layout:\n" " fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n" #ifdef CONFIG_HIGHMEM @@ -660,7 +648,6 @@ void __init mem_init(void) #endif BUG_ON(VMALLOC_START > VMALLOC_END); BUG_ON((unsigned long)high_memory > VMALLOC_START); -#endif /* double-sanity-check paranoia */ if (boot_cpu_data.wp_works_ok < 0) test_wp_bit(); diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 5e438385905..48623ae628f 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -18,6 +18,7 @@ #include <linux/swap.h> #include <linux/smp.h> #include <linux/init.h> +#include <linux/initrd.h> #include <linux/pagemap.h> #include <linux/bootmem.h> #include <linux/proc_fs.h> @@ -438,7 +439,7 @@ static void __init init_gbpages(void) direct_gbpages = 0; } -#ifdef CONFIG_MEMTEST_BOOTPARAM +#ifdef CONFIG_MEMTEST static void __init memtest(unsigned long start_phys, unsigned long size, unsigned pattern) @@ -500,7 +501,8 @@ static void __init memtest(unsigned long start_phys, unsigned long size, } -static int memtest_pattern __initdata = CONFIG_MEMTEST_BOOTPARAM_VALUE; +/* default is disabled */ +static int memtest_pattern __initdata; static int __init parse_memtest(char *arg) { diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 01d76426971..416ea415f5c 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -142,7 +142,7 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, /* * Don't remap the low PCI/ISA area, it's always mapped.. */ - if (phys_addr >= ISA_START_ADDRESS && last_addr < ISA_END_ADDRESS) + if (is_ISA_range(phys_addr, last_addr)) return (__force void __iomem *)phys_to_virt(phys_addr); /* @@ -261,7 +261,7 @@ void __iomem *ioremap_nocache(resource_size_t phys_addr, unsigned long size) { /* * Ideally, this should be: - * pat_wc_enabled ? _PAGE_CACHE_UC : _PAGE_CACHE_UC_MINUS; + * pat_enabled ? _PAGE_CACHE_UC : _PAGE_CACHE_UC_MINUS; * * Till we fix all X drivers to use ioremap_wc(), we will use * UC MINUS. @@ -285,7 +285,7 @@ EXPORT_SYMBOL(ioremap_nocache); */ void __iomem *ioremap_wc(unsigned long phys_addr, unsigned long size) { - if (pat_wc_enabled) + if (pat_enabled) return __ioremap_caller(phys_addr, size, _PAGE_CACHE_WC, __builtin_return_address(0)); else diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/k8topology_64.c index 1f476e47784..0ea66b532c3 100644 --- a/arch/x86/mm/k8topology_64.c +++ b/arch/x86/mm/k8topology_64.c @@ -22,6 +22,7 @@ #include <asm/numa.h> #include <asm/mpspec.h> #include <asm/apic.h> +#include <asm/k8.h> static __init int find_northbridge(void) { @@ -73,17 +74,12 @@ static __init void early_get_boot_cpu_id(void) int __init k8_scan_nodes(unsigned long start, unsigned long end) { + unsigned numnodes, cores, bits, apicid_base; unsigned long prevbase; struct bootnode nodes[8]; - int nodeid, i, nb; unsigned char nodeids[8]; - int found = 0; - u32 reg; - unsigned numnodes; - unsigned cores; - unsigned bits; - int j; - unsigned apicid_base; + int i, j, nb, found = 0; + u32 nodeid, reg; if (!early_pci_allowed()) return -1; @@ -105,7 +101,6 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end) prevbase = 0; for (i = 0; i < 8; i++) { unsigned long base, limit; - u32 nodeid; base = read_pci_config(0, nb, 1, 0x40 + i*8); limit = read_pci_config(0, nb, 1, 0x44 + i*8); diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 0a3f5e047f8..afd40054d15 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -844,7 +844,7 @@ int _set_memory_wc(unsigned long addr, int numpages) int set_memory_wc(unsigned long addr, int numpages) { - if (!pat_wc_enabled) + if (!pat_enabled) return set_memory_uc(addr, numpages); if (reserve_memtype(addr, addr + numpages * PAGE_SIZE, diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index 06b7a1c90fb..a885a1019b8 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -26,11 +26,11 @@ #include <asm/io.h> #ifdef CONFIG_X86_PAT -int __read_mostly pat_wc_enabled = 1; +int __read_mostly pat_enabled = 1; void __cpuinit pat_disable(char *reason) { - pat_wc_enabled = 0; + pat_enabled = 0; printk(KERN_INFO "%s\n", reason); } @@ -42,6 +42,19 @@ static int __init nopat(char *str) early_param("nopat", nopat); #endif + +static int debug_enable; +static int __init pat_debug_setup(char *str) +{ + debug_enable = 1; + return 0; +} +__setup("debugpat", pat_debug_setup); + +#define dprintk(fmt, arg...) \ + do { if (debug_enable) printk(KERN_INFO fmt, ##arg); } while (0) + + static u64 __read_mostly boot_pat_state; enum { @@ -53,24 +66,25 @@ enum { PAT_UC_MINUS = 7, /* UC, but can be overriden by MTRR */ }; -#define PAT(x,y) ((u64)PAT_ ## y << ((x)*8)) +#define PAT(x, y) ((u64)PAT_ ## y << ((x)*8)) void pat_init(void) { u64 pat; - if (!pat_wc_enabled) + if (!pat_enabled) return; /* Paranoia check. */ - if (!cpu_has_pat) { - printk(KERN_ERR "PAT enabled, but CPU feature cleared\n"); + if (!cpu_has_pat && boot_pat_state) { /* - * Panic if this happens on the secondary CPU, and we + * If this happens we are on a secondary CPU, but * switched to PAT on the boot CPU. We have no way to * undo PAT. - */ - BUG_ON(boot_pat_state); + */ + printk(KERN_ERR "PAT enabled, " + "but not supported by secondary CPU\n"); + BUG(); } /* Set PWT to Write-Combining. All other bits stay the same */ @@ -86,8 +100,8 @@ void pat_init(void) * 011 UC _PAGE_CACHE_UC * PAT bit unused */ - pat = PAT(0,WB) | PAT(1,WC) | PAT(2,UC_MINUS) | PAT(3,UC) | - PAT(4,WB) | PAT(5,WC) | PAT(6,UC_MINUS) | PAT(7,UC); + pat = PAT(0, WB) | PAT(1, WC) | PAT(2, UC_MINUS) | PAT(3, UC) | + PAT(4, WB) | PAT(5, WC) | PAT(6, UC_MINUS) | PAT(7, UC); /* Boot CPU check */ if (!boot_pat_state) @@ -103,11 +117,11 @@ void pat_init(void) static char *cattr_name(unsigned long flags) { switch (flags & _PAGE_CACHE_MASK) { - case _PAGE_CACHE_UC: return "uncached"; - case _PAGE_CACHE_UC_MINUS: return "uncached-minus"; - case _PAGE_CACHE_WB: return "write-back"; - case _PAGE_CACHE_WC: return "write-combining"; - default: return "broken"; + case _PAGE_CACHE_UC: return "uncached"; + case _PAGE_CACHE_UC_MINUS: return "uncached-minus"; + case _PAGE_CACHE_WB: return "write-back"; + case _PAGE_CACHE_WC: return "write-combining"; + default: return "broken"; } } @@ -145,47 +159,50 @@ static DEFINE_SPINLOCK(memtype_lock); /* protects memtype list */ * The intersection is based on "Effective Memory Type" tables in IA-32 * SDM vol 3a */ -static int pat_x_mtrr_type(u64 start, u64 end, unsigned long prot, - unsigned long *ret_prot) +static unsigned long pat_x_mtrr_type(u64 start, u64 end, unsigned long req_type) { - unsigned long pat_type; - u8 mtrr_type; - - pat_type = prot & _PAGE_CACHE_MASK; - prot &= (~_PAGE_CACHE_MASK); - - /* - * We return the PAT request directly for types where PAT takes - * precedence with respect to MTRR and for UC_MINUS. - * Consistency checks with other PAT requests is done later - * while going through memtype list. - */ - if (pat_type == _PAGE_CACHE_WC) { - *ret_prot = prot | _PAGE_CACHE_WC; - return 0; - } else if (pat_type == _PAGE_CACHE_UC_MINUS) { - *ret_prot = prot | _PAGE_CACHE_UC_MINUS; - return 0; - } else if (pat_type == _PAGE_CACHE_UC) { - *ret_prot = prot | _PAGE_CACHE_UC; - return 0; - } - /* * Look for MTRR hint to get the effective type in case where PAT * request is for WB. */ - mtrr_type = mtrr_type_lookup(start, end); + if (req_type == _PAGE_CACHE_WB) { + u8 mtrr_type; + + mtrr_type = mtrr_type_lookup(start, end); + if (mtrr_type == MTRR_TYPE_UNCACHABLE) + return _PAGE_CACHE_UC; + if (mtrr_type == MTRR_TYPE_WRCOMB) + return _PAGE_CACHE_WC; + } - if (mtrr_type == MTRR_TYPE_UNCACHABLE) { - *ret_prot = prot | _PAGE_CACHE_UC; - } else if (mtrr_type == MTRR_TYPE_WRCOMB) { - *ret_prot = prot | _PAGE_CACHE_WC; - } else { - *ret_prot = prot | _PAGE_CACHE_WB; + return req_type; +} + +static int chk_conflict(struct memtype *new, struct memtype *entry, + unsigned long *type) +{ + if (new->type != entry->type) { + if (type) { + new->type = entry->type; + *type = entry->type; + } else + goto conflict; } + /* check overlaps with more than one entry in the list */ + list_for_each_entry_continue(entry, &memtype_list, nd) { + if (new->end <= entry->start) + break; + else if (new->type != entry->type) + goto conflict; + } return 0; + + conflict: + printk(KERN_INFO "%s:%d conflicting memory types " + "%Lx-%Lx %s<->%s\n", current->comm, current->pid, new->start, + new->end, cattr_name(new->type), cattr_name(entry->type)); + return -EBUSY; } /* @@ -198,37 +215,36 @@ static int pat_x_mtrr_type(u64 start, u64 end, unsigned long prot, * req_type will have a special case value '-1', when requester want to inherit * the memory type from mtrr (if WB), existing PAT, defaulting to UC_MINUS. * - * If ret_type is NULL, function will return an error if it cannot reserve the - * region with req_type. If ret_type is non-null, function will return - * available type in ret_type in case of no error. In case of any error + * If new_type is NULL, function will return an error if it cannot reserve the + * region with req_type. If new_type is non-NULL, function will return + * available type in new_type in case of no error. In case of any error * it will return a negative return value. */ int reserve_memtype(u64 start, u64 end, unsigned long req_type, - unsigned long *ret_type) + unsigned long *new_type) { - struct memtype *new_entry = NULL; - struct memtype *parse; + struct memtype *new, *entry; unsigned long actual_type; + struct list_head *where; int err = 0; - /* Only track when pat_wc_enabled */ - if (!pat_wc_enabled) { + BUG_ON(start >= end); /* end is exclusive */ + + if (!pat_enabled) { /* This is identical to page table setting without PAT */ - if (ret_type) { - if (req_type == -1) { - *ret_type = _PAGE_CACHE_WB; - } else { - *ret_type = req_type; - } + if (new_type) { + if (req_type == -1) + *new_type = _PAGE_CACHE_WB; + else + *new_type = req_type & _PAGE_CACHE_MASK; } return 0; } /* Low ISA region is always mapped WB in page table. No need to track */ - if (start >= ISA_START_ADDRESS && (end - 1) <= ISA_END_ADDRESS) { - if (ret_type) - *ret_type = _PAGE_CACHE_WB; - + if (is_ISA_range(start, end - 1)) { + if (new_type) + *new_type = _PAGE_CACHE_WB; return 0; } @@ -241,206 +257,92 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, */ u8 mtrr_type = mtrr_type_lookup(start, end); - if (mtrr_type == MTRR_TYPE_WRBACK) { - req_type = _PAGE_CACHE_WB; + if (mtrr_type == MTRR_TYPE_WRBACK) actual_type = _PAGE_CACHE_WB; - } else { - req_type = _PAGE_CACHE_UC_MINUS; + else actual_type = _PAGE_CACHE_UC_MINUS; - } - } else { - req_type &= _PAGE_CACHE_MASK; - err = pat_x_mtrr_type(start, end, req_type, &actual_type); - } - - if (err) { - if (ret_type) - *ret_type = actual_type; - - return -EINVAL; - } + } else + actual_type = pat_x_mtrr_type(start, end, + req_type & _PAGE_CACHE_MASK); - new_entry = kmalloc(sizeof(struct memtype), GFP_KERNEL); - if (!new_entry) + new = kmalloc(sizeof(struct memtype), GFP_KERNEL); + if (!new) return -ENOMEM; - new_entry->start = start; - new_entry->end = end; - new_entry->type = actual_type; + new->start = start; + new->end = end; + new->type = actual_type; - if (ret_type) - *ret_type = actual_type; + if (new_type) + *new_type = actual_type; spin_lock(&memtype_lock); /* Search for existing mapping that overlaps the current range */ - list_for_each_entry(parse, &memtype_list, nd) { - struct memtype *saved_ptr; - - if (parse->start >= end) { - pr_debug("New Entry\n"); - list_add(&new_entry->nd, parse->nd.prev); - new_entry = NULL; + where = NULL; + list_for_each_entry(entry, &memtype_list, nd) { + if (end <= entry->start) { + where = entry->nd.prev; break; - } - - if (start <= parse->start && end >= parse->start) { - if (actual_type != parse->type && ret_type) { - actual_type = parse->type; - *ret_type = actual_type; - new_entry->type = actual_type; - } - - if (actual_type != parse->type) { - printk( - KERN_INFO "%s:%d conflicting memory types %Lx-%Lx %s<->%s\n", - current->comm, current->pid, - start, end, - cattr_name(actual_type), - cattr_name(parse->type)); - err = -EBUSY; - break; + } else if (start <= entry->start) { /* end > entry->start */ + err = chk_conflict(new, entry, new_type); + if (!err) { + dprintk("Overlap at 0x%Lx-0x%Lx\n", + entry->start, entry->end); + where = entry->nd.prev; } - - saved_ptr = parse; - /* - * Check to see whether the request overlaps more - * than one entry in the list - */ - list_for_each_entry_continue(parse, &memtype_list, nd) { - if (end <= parse->start) { - break; - } - - if (actual_type != parse->type) { - printk( - KERN_INFO "%s:%d conflicting memory types %Lx-%Lx %s<->%s\n", - current->comm, current->pid, - start, end, - cattr_name(actual_type), - cattr_name(parse->type)); - err = -EBUSY; - break; - } - } - - if (err) { - break; - } - - pr_debug("Overlap at 0x%Lx-0x%Lx\n", - saved_ptr->start, saved_ptr->end); - /* No conflict. Go ahead and add this new entry */ - list_add(&new_entry->nd, saved_ptr->nd.prev); - new_entry = NULL; break; - } - - if (start < parse->end) { - if (actual_type != parse->type && ret_type) { - actual_type = parse->type; - *ret_type = actual_type; - new_entry->type = actual_type; - } - - if (actual_type != parse->type) { - printk( - KERN_INFO "%s:%d conflicting memory types %Lx-%Lx %s<->%s\n", - current->comm, current->pid, - start, end, - cattr_name(actual_type), - cattr_name(parse->type)); - err = -EBUSY; - break; - } - - saved_ptr = parse; - /* - * Check to see whether the request overlaps more - * than one entry in the list - */ - list_for_each_entry_continue(parse, &memtype_list, nd) { - if (end <= parse->start) { - break; - } - - if (actual_type != parse->type) { - printk( - KERN_INFO "%s:%d conflicting memory types %Lx-%Lx %s<->%s\n", - current->comm, current->pid, - start, end, - cattr_name(actual_type), - cattr_name(parse->type)); - err = -EBUSY; - break; - } - } - - if (err) { - break; + } else if (start < entry->end) { /* start > entry->start */ + err = chk_conflict(new, entry, new_type); + if (!err) { + dprintk("Overlap at 0x%Lx-0x%Lx\n", + entry->start, entry->end); + where = &entry->nd; } - - pr_debug(KERN_INFO "Overlap at 0x%Lx-0x%Lx\n", - saved_ptr->start, saved_ptr->end); - /* No conflict. Go ahead and add this new entry */ - list_add(&new_entry->nd, &saved_ptr->nd); - new_entry = NULL; break; } } if (err) { - printk(KERN_INFO - "reserve_memtype failed 0x%Lx-0x%Lx, track %s, req %s\n", - start, end, cattr_name(new_entry->type), - cattr_name(req_type)); - kfree(new_entry); + printk(KERN_INFO "reserve_memtype failed 0x%Lx-0x%Lx, " + "track %s, req %s\n", + start, end, cattr_name(new->type), cattr_name(req_type)); + kfree(new); spin_unlock(&memtype_lock); return err; } - if (new_entry) { - /* No conflict. Not yet added to the list. Add to the tail */ - list_add_tail(&new_entry->nd, &memtype_list); - pr_debug("New Entry\n"); - } - - if (ret_type) { - pr_debug( - "reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s, ret %s\n", - start, end, cattr_name(actual_type), - cattr_name(req_type), cattr_name(*ret_type)); - } else { - pr_debug( - "reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s\n", - start, end, cattr_name(actual_type), - cattr_name(req_type)); - } + if (where) + list_add(&new->nd, where); + else + list_add_tail(&new->nd, &memtype_list); spin_unlock(&memtype_lock); + + dprintk("reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s, ret %s\n", + start, end, cattr_name(new->type), cattr_name(req_type), + new_type ? cattr_name(*new_type) : "-"); + return err; } int free_memtype(u64 start, u64 end) { - struct memtype *ml; + struct memtype *entry; int err = -EINVAL; - /* Only track when pat_wc_enabled */ - if (!pat_wc_enabled) { + if (!pat_enabled) return 0; - } /* Low ISA region is always mapped WB. No need to track */ - if (start >= ISA_START_ADDRESS && end <= ISA_END_ADDRESS) { + if (is_ISA_range(start, end - 1)) return 0; - } spin_lock(&memtype_lock); - list_for_each_entry(ml, &memtype_list, nd) { - if (ml->start == start && ml->end == end) { - list_del(&ml->nd); - kfree(ml); + list_for_each_entry(entry, &memtype_list, nd) { + if (entry->start == start && entry->end == end) { + list_del(&entry->nd); + kfree(entry); err = 0; break; } @@ -452,7 +354,7 @@ int free_memtype(u64 start, u64 end) current->comm, current->pid, start, end); } - pr_debug("free_memtype request 0x%Lx-0x%Lx\n", start, end); + dprintk("free_memtype request 0x%Lx-0x%Lx\n", start, end); return err; } @@ -521,12 +423,12 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, * caching for the high addresses through the KEN pin, but * we maintain the tradition of paranoia in this code. */ - if (!pat_wc_enabled && - ! ( test_bit(X86_FEATURE_MTRR, boot_cpu_data.x86_capability) || - test_bit(X86_FEATURE_K6_MTRR, boot_cpu_data.x86_capability) || - test_bit(X86_FEATURE_CYRIX_ARR, boot_cpu_data.x86_capability) || - test_bit(X86_FEATURE_CENTAUR_MCR, boot_cpu_data.x86_capability)) && - (pfn << PAGE_SHIFT) >= __pa(high_memory)) { + if (!pat_enabled && + !(boot_cpu_has(X86_FEATURE_MTRR) || + boot_cpu_has(X86_FEATURE_K6_MTRR) || + boot_cpu_has(X86_FEATURE_CYRIX_ARR) || + boot_cpu_has(X86_FEATURE_CENTAUR_MCR)) && + (pfn << PAGE_SHIFT) >= __pa(high_memory)) { flags = _PAGE_CACHE_UC; } #endif @@ -548,7 +450,7 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, return 0; if (pfn <= max_pfn_mapped && - ioremap_change_attr((unsigned long)__va(offset), size, flags) < 0) { + ioremap_change_attr((unsigned long)__va(offset), size, flags) < 0) { free_memtype(offset, offset + size); printk(KERN_INFO "%s:%d /dev/mem ioremap_change_attr failed %s for %Lx-%Lx\n", @@ -586,4 +488,3 @@ void unmap_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot) free_memtype(addr, addr + size); } - diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c index 50159764f69..ee1d6d39edd 100644 --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -255,7 +255,7 @@ int ptep_test_and_clear_young(struct vm_area_struct *vma, if (pte_young(*ptep)) ret = test_and_clear_bit(_PAGE_BIT_ACCESSED, - &ptep->pte); + (unsigned long *) &ptep->pte); if (ret) pte_update(vma->vm_mm, addr, ptep); diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 99649dccad2..391d5103587 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -495,6 +495,7 @@ int __node_distance(int a, int b) EXPORT_SYMBOL(__node_distance); +#if defined(CONFIG_MEMORY_HOTPLUG_SPARSE) || defined(CONFIG_ACPI_HOTPLUG_MEMORY) int memory_add_physaddr_to_nid(u64 start) { int i, ret = 0; @@ -506,4 +507,4 @@ int memory_add_physaddr_to_nid(u64 start) return ret; } EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); - +#endif diff --git a/arch/x86/pci/Makefile_32 b/arch/x86/pci/Makefile_32 index 89ec35d00ef..f647e7e56da 100644 --- a/arch/x86/pci/Makefile_32 +++ b/arch/x86/pci/Makefile_32 @@ -22,3 +22,4 @@ pci-$(CONFIG_X86_NUMAQ) := numa.o irq.o pci-$(CONFIG_NUMA) += mp_bus_to_node.o obj-y += $(pci-y) common.o early.o +obj-y += amd_bus.o diff --git a/arch/x86/pci/Makefile_64 b/arch/x86/pci/Makefile_64 index 8fbd19832cf..fd47068c95d 100644 --- a/arch/x86/pci/Makefile_64 +++ b/arch/x86/pci/Makefile_64 @@ -13,5 +13,5 @@ obj-y += legacy.o irq.o common.o early.o # mmconfig has a 64bit special obj-$(CONFIG_PCI_MMCONFIG) += mmconfig_64.o direct.o mmconfig-shared.o -obj-y += k8-bus_64.o +obj-y += amd_bus.o diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index d95de2f199c..464279da49c 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -218,7 +218,6 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do return bus; } -extern int pci_routeirq; static int __init pci_acpi_init(void) { struct pci_dev *dev = NULL; diff --git a/arch/x86/pci/k8-bus_64.c b/arch/x86/pci/amd_bus.c index 5c2799c20e4..15f505d3a78 100644 --- a/arch/x86/pci/k8-bus_64.c +++ b/arch/x86/pci/amd_bus.c @@ -1,5 +1,9 @@ #include <linux/init.h> #include <linux/pci.h> +#include "pci.h" + +#ifdef CONFIG_X86_64 + #include <asm/pci-direct.h> #include <asm/mpspec.h> #include <linux/cpumask.h> @@ -526,3 +530,31 @@ static int __init early_fill_mp_bus_info(void) } postcore_initcall(early_fill_mp_bus_info); + +#endif + +/* common 32/64 bit code */ + +#define ENABLE_CF8_EXT_CFG (1ULL << 46) + +static void enable_pci_io_ecs_per_cpu(void *unused) +{ + u64 reg; + rdmsrl(MSR_AMD64_NB_CFG, reg); + if (!(reg & ENABLE_CF8_EXT_CFG)) { + reg |= ENABLE_CF8_EXT_CFG; + wrmsrl(MSR_AMD64_NB_CFG, reg); + } +} + +static int __init enable_pci_io_ecs(void) +{ + /* assume all cpus from fam10h have IO ECS */ + if (boot_cpu_data.x86 < 0x10) + return 0; + on_each_cpu(enable_pci_io_ecs_per_cpu, NULL, 1, 1); + pci_probe |= PCI_HAS_IO_ECS; + return 0; +} + +postcore_initcall(enable_pci_io_ecs); diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c index 21d1e0e0d53..9915293500f 100644 --- a/arch/x86/pci/direct.c +++ b/arch/x86/pci/direct.c @@ -8,18 +8,21 @@ #include "pci.h" /* - * Functions for accessing PCI configuration space with type 1 accesses + * Functions for accessing PCI base (first 256 bytes) and extended + * (4096 bytes per PCI function) configuration space with type 1 + * accesses. */ #define PCI_CONF1_ADDRESS(bus, devfn, reg) \ - (0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3)) + (0x80000000 | ((reg & 0xF00) << 16) | (bus << 16) \ + | (devfn << 8) | (reg & 0xFC)) static int pci_conf1_read(unsigned int seg, unsigned int bus, unsigned int devfn, int reg, int len, u32 *value) { unsigned long flags; - if ((bus > 255) || (devfn > 255) || (reg > 255)) { + if ((bus > 255) || (devfn > 255) || (reg > 4095)) { *value = -1; return -EINVAL; } @@ -50,7 +53,7 @@ static int pci_conf1_write(unsigned int seg, unsigned int bus, { unsigned long flags; - if ((bus > 255) || (devfn > 255) || (reg > 255)) + if ((bus > 255) || (devfn > 255) || (reg > 4095)) return -EINVAL; spin_lock_irqsave(&pci_config_lock, flags); @@ -260,10 +263,18 @@ void __init pci_direct_init(int type) return; printk(KERN_INFO "PCI: Using configuration type %d for base access\n", type); - if (type == 1) + if (type == 1) { raw_pci_ops = &pci_direct_conf1; - else - raw_pci_ops = &pci_direct_conf2; + if (raw_pci_ext_ops) + return; + if (!(pci_probe & PCI_HAS_IO_ECS)) + return; + printk(KERN_INFO "PCI: Using configuration type 1 " + "for extended access\n"); + raw_pci_ext_ops = &pci_direct_conf1; + return; + } + raw_pci_ops = &pci_direct_conf2; } int __init pci_direct_probe(void) diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index 10fb308fded..6ccd7a108cd 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -299,9 +299,9 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, return -EINVAL; prot = pgprot_val(vma->vm_page_prot); - if (pat_wc_enabled && write_combine) + if (pat_enabled && write_combine) prot |= _PAGE_CACHE_WC; - else if (pat_wc_enabled || boot_cpu_data.x86 > 3) + else if (pat_enabled || boot_cpu_data.x86 > 3) /* * ioremap() and ioremap_nocache() defaults to UC MINUS for now. * To avoid attribute conflicts, request UC MINUS here diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index ca8df9c260b..f0859de23e2 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -11,8 +11,8 @@ #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/dmi.h> -#include <asm/io.h> -#include <asm/smp.h> +#include <linux/io.h> +#include <linux/smp.h> #include <asm/io_apic.h> #include <linux/irq.h> #include <linux/acpi.h> @@ -61,7 +61,7 @@ void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL; * and perform checksum verification. */ -static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr) +static inline struct irq_routing_table *pirq_check_routing_table(u8 *addr) { struct irq_routing_table *rt; int i; @@ -74,7 +74,7 @@ static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr) rt->size < sizeof(struct irq_routing_table)) return NULL; sum = 0; - for (i=0; i < rt->size; i++) + for (i = 0; i < rt->size; i++) sum += addr[i]; if (!sum) { DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n", rt); @@ -100,7 +100,7 @@ static struct irq_routing_table * __init pirq_find_routing_table(void) return rt; printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n"); } - for(addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) { + for (addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) { rt = pirq_check_routing_table(addr); if (rt) return rt; @@ -122,20 +122,20 @@ static void __init pirq_peer_trick(void) struct irq_info *e; memset(busmap, 0, sizeof(busmap)); - for(i=0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) { + for (i = 0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) { e = &rt->slots[i]; #ifdef DEBUG { int j; DBG(KERN_DEBUG "%02x:%02x slot=%02x", e->bus, e->devfn/8, e->slot); - for(j=0; j<4; j++) + for (j = 0; j < 4; j++) DBG(" %d:%02x/%04x", j, e->irq[j].link, e->irq[j].bitmap); DBG("\n"); } #endif busmap[e->bus] = 1; } - for(i = 1; i < 256; i++) { + for (i = 1; i < 256; i++) { int node; if (!busmap[i] || pci_find_bus(0, i)) continue; @@ -285,7 +285,7 @@ static int pirq_ite_get(struct pci_dev *router, struct pci_dev *dev, int pirq) static const unsigned char pirqmap[4] = { 1, 0, 2, 3 }; WARN_ON_ONCE(pirq > 4); - return read_config_nybble(router,0x43, pirqmap[pirq-1]); + return read_config_nybble(router, 0x43, pirqmap[pirq-1]); } static int pirq_ite_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) @@ -314,7 +314,7 @@ static int pirq_opti_set(struct pci_dev *router, struct pci_dev *dev, int pirq, /* * Cyrix: nibble offset 0x5C - * 0x5C bits 7:4 is INTB bits 3:0 is INTA + * 0x5C bits 7:4 is INTB bits 3:0 is INTA * 0x5D bits 7:4 is INTD bits 3:0 is INTC */ static int pirq_cyrix_get(struct pci_dev *router, struct pci_dev *dev, int pirq) @@ -350,7 +350,7 @@ static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, * Apparently there are systems implementing PCI routing table using * link values 0x01-0x04 and others using 0x41-0x44 for PCI INTA..D. * We try our best to handle both link mappings. - * + * * Currently (2003-05-21) it appears most SiS chipsets follow the * definition of routing registers from the SiS-5595 southbridge. * According to the SiS 5595 datasheets the revision id's of the @@ -370,7 +370,7 @@ static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, * * 0x62: USBIRQ: * bit 6 OHCI function disabled (0), enabled (1) - * + * * 0x6a: ACPI/SCI IRQ: bits 4-6 reserved * * 0x7e: Data Acq. Module IRQ - bits 4-6 reserved @@ -487,9 +487,7 @@ static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq u8 irq; irq = 0; if (pirq <= 4) - { irq = read_config_nybble(router, 0x56, pirq - 1); - } printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n", dev->vendor, dev->device, pirq, irq); return irq; @@ -497,12 +495,10 @@ static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { - printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n", + printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n", dev->vendor, dev->device, pirq, irq); if (pirq <= 4) - { write_config_nybble(router, 0x56, pirq - 1, irq); - } return 1; } @@ -549,50 +545,49 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route if (pci_dev_present(pirq_440gx)) return 0; - switch(device) - { - case PCI_DEVICE_ID_INTEL_82371FB_0: - case PCI_DEVICE_ID_INTEL_82371SB_0: - case PCI_DEVICE_ID_INTEL_82371AB_0: - case PCI_DEVICE_ID_INTEL_82371MX: - case PCI_DEVICE_ID_INTEL_82443MX_0: - case PCI_DEVICE_ID_INTEL_82801AA_0: - case PCI_DEVICE_ID_INTEL_82801AB_0: - case PCI_DEVICE_ID_INTEL_82801BA_0: - case PCI_DEVICE_ID_INTEL_82801BA_10: - case PCI_DEVICE_ID_INTEL_82801CA_0: - case PCI_DEVICE_ID_INTEL_82801CA_12: - case PCI_DEVICE_ID_INTEL_82801DB_0: - case PCI_DEVICE_ID_INTEL_82801E_0: - case PCI_DEVICE_ID_INTEL_82801EB_0: - case PCI_DEVICE_ID_INTEL_ESB_1: - case PCI_DEVICE_ID_INTEL_ICH6_0: - case PCI_DEVICE_ID_INTEL_ICH6_1: - case PCI_DEVICE_ID_INTEL_ICH7_0: - case PCI_DEVICE_ID_INTEL_ICH7_1: - case PCI_DEVICE_ID_INTEL_ICH7_30: - case PCI_DEVICE_ID_INTEL_ICH7_31: - case PCI_DEVICE_ID_INTEL_ESB2_0: - case PCI_DEVICE_ID_INTEL_ICH8_0: - case PCI_DEVICE_ID_INTEL_ICH8_1: - case PCI_DEVICE_ID_INTEL_ICH8_2: - case PCI_DEVICE_ID_INTEL_ICH8_3: - case PCI_DEVICE_ID_INTEL_ICH8_4: - case PCI_DEVICE_ID_INTEL_ICH9_0: - case PCI_DEVICE_ID_INTEL_ICH9_1: - case PCI_DEVICE_ID_INTEL_ICH9_2: - case PCI_DEVICE_ID_INTEL_ICH9_3: - case PCI_DEVICE_ID_INTEL_ICH9_4: - case PCI_DEVICE_ID_INTEL_ICH9_5: - case PCI_DEVICE_ID_INTEL_TOLAPAI_0: - case PCI_DEVICE_ID_INTEL_ICH10_0: - case PCI_DEVICE_ID_INTEL_ICH10_1: - case PCI_DEVICE_ID_INTEL_ICH10_2: - case PCI_DEVICE_ID_INTEL_ICH10_3: - r->name = "PIIX/ICH"; - r->get = pirq_piix_get; - r->set = pirq_piix_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_INTEL_82371FB_0: + case PCI_DEVICE_ID_INTEL_82371SB_0: + case PCI_DEVICE_ID_INTEL_82371AB_0: + case PCI_DEVICE_ID_INTEL_82371MX: + case PCI_DEVICE_ID_INTEL_82443MX_0: + case PCI_DEVICE_ID_INTEL_82801AA_0: + case PCI_DEVICE_ID_INTEL_82801AB_0: + case PCI_DEVICE_ID_INTEL_82801BA_0: + case PCI_DEVICE_ID_INTEL_82801BA_10: + case PCI_DEVICE_ID_INTEL_82801CA_0: + case PCI_DEVICE_ID_INTEL_82801CA_12: + case PCI_DEVICE_ID_INTEL_82801DB_0: + case PCI_DEVICE_ID_INTEL_82801E_0: + case PCI_DEVICE_ID_INTEL_82801EB_0: + case PCI_DEVICE_ID_INTEL_ESB_1: + case PCI_DEVICE_ID_INTEL_ICH6_0: + case PCI_DEVICE_ID_INTEL_ICH6_1: + case PCI_DEVICE_ID_INTEL_ICH7_0: + case PCI_DEVICE_ID_INTEL_ICH7_1: + case PCI_DEVICE_ID_INTEL_ICH7_30: + case PCI_DEVICE_ID_INTEL_ICH7_31: + case PCI_DEVICE_ID_INTEL_ESB2_0: + case PCI_DEVICE_ID_INTEL_ICH8_0: + case PCI_DEVICE_ID_INTEL_ICH8_1: + case PCI_DEVICE_ID_INTEL_ICH8_2: + case PCI_DEVICE_ID_INTEL_ICH8_3: + case PCI_DEVICE_ID_INTEL_ICH8_4: + case PCI_DEVICE_ID_INTEL_ICH9_0: + case PCI_DEVICE_ID_INTEL_ICH9_1: + case PCI_DEVICE_ID_INTEL_ICH9_2: + case PCI_DEVICE_ID_INTEL_ICH9_3: + case PCI_DEVICE_ID_INTEL_ICH9_4: + case PCI_DEVICE_ID_INTEL_ICH9_5: + case PCI_DEVICE_ID_INTEL_TOLAPAI_0: + case PCI_DEVICE_ID_INTEL_ICH10_0: + case PCI_DEVICE_ID_INTEL_ICH10_1: + case PCI_DEVICE_ID_INTEL_ICH10_2: + case PCI_DEVICE_ID_INTEL_ICH10_3: + r->name = "PIIX/ICH"; + r->get = pirq_piix_get; + r->set = pirq_piix_set; + return 1; } return 0; } @@ -606,7 +601,7 @@ static __init int via_router_probe(struct irq_router *r, * workarounds for some buggy BIOSes */ if (device == PCI_DEVICE_ID_VIA_82C586_0) { - switch(router->device) { + switch (router->device) { case PCI_DEVICE_ID_VIA_82C686: /* * Asus k7m bios wrongly reports 82C686A @@ -631,7 +626,7 @@ static __init int via_router_probe(struct irq_router *r, } } - switch(device) { + switch (device) { case PCI_DEVICE_ID_VIA_82C586_0: r->name = "VIA"; r->get = pirq_via586_get; @@ -654,13 +649,12 @@ static __init int via_router_probe(struct irq_router *r, static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_VLSI_82C534: - r->name = "VLSI 82C534"; - r->get = pirq_vlsi_get; - r->set = pirq_vlsi_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_VLSI_82C534: + r->name = "VLSI 82C534"; + r->get = pirq_vlsi_get; + r->set = pirq_vlsi_set; + return 1; } return 0; } @@ -668,14 +662,13 @@ static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router static __init int serverworks_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_SERVERWORKS_OSB4: - case PCI_DEVICE_ID_SERVERWORKS_CSB5: - r->name = "ServerWorks"; - r->get = pirq_serverworks_get; - r->set = pirq_serverworks_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_SERVERWORKS_OSB4: + case PCI_DEVICE_ID_SERVERWORKS_CSB5: + r->name = "ServerWorks"; + r->get = pirq_serverworks_get; + r->set = pirq_serverworks_set; + return 1; } return 0; } @@ -684,7 +677,7 @@ static __init int sis_router_probe(struct irq_router *r, struct pci_dev *router, { if (device != PCI_DEVICE_ID_SI_503) return 0; - + r->name = "SIS"; r->get = pirq_sis_get; r->set = pirq_sis_set; @@ -693,47 +686,43 @@ static __init int sis_router_probe(struct irq_router *r, struct pci_dev *router, static __init int cyrix_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_CYRIX_5520: - r->name = "NatSemi"; - r->get = pirq_cyrix_get; - r->set = pirq_cyrix_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_CYRIX_5520: + r->name = "NatSemi"; + r->get = pirq_cyrix_get; + r->set = pirq_cyrix_set; + return 1; } return 0; } static __init int opti_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_OPTI_82C700: - r->name = "OPTI"; - r->get = pirq_opti_get; - r->set = pirq_opti_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_OPTI_82C700: + r->name = "OPTI"; + r->get = pirq_opti_get; + r->set = pirq_opti_set; + return 1; } return 0; } static __init int ite_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_ITE_IT8330G_0: - r->name = "ITE"; - r->get = pirq_ite_get; - r->set = pirq_ite_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_ITE_IT8330G_0: + r->name = "ITE"; + r->get = pirq_ite_get; + r->set = pirq_ite_set; + return 1; } return 0; } static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { + switch (device) { case PCI_DEVICE_ID_AL_M1533: case PCI_DEVICE_ID_AL_M1563: printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n"); @@ -747,25 +736,24 @@ static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, static __init int amd_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_AMD_VIPER_740B: - r->name = "AMD756"; - break; - case PCI_DEVICE_ID_AMD_VIPER_7413: - r->name = "AMD766"; - break; - case PCI_DEVICE_ID_AMD_VIPER_7443: - r->name = "AMD768"; - break; - default: - return 0; + switch (device) { + case PCI_DEVICE_ID_AMD_VIPER_740B: + r->name = "AMD756"; + break; + case PCI_DEVICE_ID_AMD_VIPER_7413: + r->name = "AMD766"; + break; + case PCI_DEVICE_ID_AMD_VIPER_7443: + r->name = "AMD768"; + break; + default: + return 0; } r->get = pirq_amd756_get; r->set = pirq_amd756_set; return 1; } - + static __init int pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { switch (device) { @@ -807,7 +795,7 @@ static struct pci_dev *pirq_router_dev; * FIXME: should we have an option to say "generic for * chipset" ? */ - + static void __init pirq_find_router(struct irq_router *r) { struct irq_routing_table *rt = pirq_table; @@ -826,7 +814,7 @@ static void __init pirq_find_router(struct irq_router *r) r->name = "default"; r->get = NULL; r->set = NULL; - + DBG(KERN_DEBUG "PCI: Attempting to find IRQ router for %04x:%04x\n", rt->rtr_vendor, rt->rtr_device); @@ -837,7 +825,7 @@ static void __init pirq_find_router(struct irq_router *r) return; } - for( h = pirq_routers; h->vendor; h++) { + for (h = pirq_routers; h->vendor; h++) { /* First look for a router match */ if (rt->rtr_vendor == h->vendor && h->probe(r, pirq_router_dev, rt->rtr_device)) break; @@ -889,7 +877,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) if (!pirq_table) return 0; - + DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin); info = pirq_get_info(dev); if (!info) { @@ -928,8 +916,10 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) */ newirq = dev->irq; if (newirq && !((1 << newirq) & mask)) { - if ( pci_probe & PCI_USE_PIRQ_MASK) newirq = 0; - else printk("\n" KERN_WARNING + if (pci_probe & PCI_USE_PIRQ_MASK) + newirq = 0; + else + printk("\n" KERN_WARNING "PCI: IRQ %i for device %s doesn't match PIRQ mask " "- try pci=usepirqmask\n" KERN_DEBUG, newirq, pci_name(dev)); @@ -949,8 +939,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) irq = pirq & 0xf; DBG(" -> hardcoded IRQ %d\n", irq); msg = "Hardcoded"; - } else if ( r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \ - ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask)) ) { + } else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \ + ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) { DBG(" -> got IRQ %d\n", irq); msg = "Found"; eisa_set_level_irq(irq); @@ -985,15 +975,15 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) continue; if (info->irq[pin].link == pirq) { /* We refuse to override the dev->irq information. Give a warning! */ - if ( dev2->irq && dev2->irq != irq && \ + if (dev2->irq && dev2->irq != irq && \ (!(pci_probe & PCI_USE_PIRQ_MASK) || \ - ((1 << dev2->irq) & mask)) ) { + ((1 << dev2->irq) & mask))) { #ifndef CONFIG_PCI_MSI - printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n", + printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n", pci_name(dev2), dev2->irq, irq); #endif - continue; - } + continue; + } dev2->irq = irq; pirq_penalty[irq]++; if (dev != dev2) @@ -1031,8 +1021,7 @@ static void __init pcibios_fixup_irqs(void) /* * Recalculate IRQ numbers if we use the I/O APIC. */ - if (io_apic_assign_pci_irqs) - { + if (io_apic_assign_pci_irqs) { int irq; if (pin) { @@ -1045,10 +1034,10 @@ static void __init pcibios_fixup_irqs(void) * busses itself so we should get into this branch reliably. */ if (irq < 0 && dev->bus->parent) { /* go back to the bridge */ - struct pci_dev * bridge = dev->bus->self; + struct pci_dev *bridge = dev->bus->self; pin = (pin + PCI_SLOT(dev->devfn)) % 4; - irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, + irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, PCI_SLOT(bridge->devfn), pin); if (irq >= 0) printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n", @@ -1138,7 +1127,7 @@ static int __init pcibios_irq_init(void) pirq_find_router(&pirq_router); if (pirq_table->exclusive_irqs) { int i; - for (i=0; i<16; i++) + for (i = 0; i < 16; i++) if (!(pirq_table->exclusive_irqs & (1 << i))) pirq_penalty[i] += 100; } @@ -1203,10 +1192,10 @@ static int pirq_enable_irq(struct pci_dev *dev) */ temp_dev = dev; while (irq < 0 && dev->bus->parent) { /* go back to the bridge */ - struct pci_dev * bridge = dev->bus->self; + struct pci_dev *bridge = dev->bus->self; pin = (pin + PCI_SLOT(dev->devfn)) % 4; - irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, + irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, PCI_SLOT(bridge->devfn), pin); if (irq >= 0) printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n", diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index 0cfebecf2a8..23faaa890ff 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -374,7 +374,7 @@ reject: static int __initdata known_bridge; -void __init __pci_mmcfg_init(int early) +static void __init __pci_mmcfg_init(int early) { /* MMCONFIG disabled */ if ((pci_probe & PCI_PROBE_MMCONF) == 0) diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h index 720c4c55453..ba263e626a6 100644 --- a/arch/x86/pci/pci.h +++ b/arch/x86/pci/pci.h @@ -27,6 +27,7 @@ #define PCI_CAN_SKIP_ISA_ALIGN 0x8000 #define PCI_USE__CRS 0x10000 #define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000 +#define PCI_HAS_IO_ECS 0x40000 extern unsigned int pci_probe; extern unsigned long pirq_table_addr; diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c index 3fdd51497a8..19a6cfaf5db 100644 --- a/arch/x86/vdso/vma.c +++ b/arch/x86/vdso/vma.c @@ -16,7 +16,7 @@ #include "vextern.h" /* Just for VMAGIC. */ #undef VEXTERN -int vdso_enabled = 1; +unsigned int __read_mostly vdso_enabled = 1; extern char vdso_start[], vdso_end[]; extern unsigned short vdso_sync_cpuid; diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig index 6c388e593bc..c2cc9958087 100644 --- a/arch/x86/xen/Kconfig +++ b/arch/x86/xen/Kconfig @@ -12,3 +12,13 @@ config XEN This is the Linux Xen port. Enabling this will allow the kernel to boot in a paravirtualized environment under the Xen hypervisor. + +config XEN_MAX_DOMAIN_MEMORY + int "Maximum allowed size of a domain in gigabytes" + default 8 + depends on XEN + help + The pseudo-physical to machine address array is sized + according to the maximum possible memory size of a Xen + domain. This array uses 1 page per gigabyte, so there's no + need to be too stingy here.
\ No newline at end of file diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile index 3d8df981d5f..2ba2d164913 100644 --- a/arch/x86/xen/Makefile +++ b/arch/x86/xen/Makefile @@ -1,4 +1,4 @@ obj-y := enlighten.o setup.o multicalls.o mmu.o \ - time.o manage.o xen-asm.o grant-table.o + time.o xen-asm.o grant-table.o suspend.o obj-$(CONFIG_SMP) += smp.o diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index f09c1c69c37..bd74229081c 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -75,13 +75,13 @@ DEFINE_PER_CPU(unsigned long, xen_current_cr3); /* actual vcpu cr3 */ struct start_info *xen_start_info; EXPORT_SYMBOL_GPL(xen_start_info); -static /* __initdata */ struct shared_info dummy_shared_info; +struct shared_info xen_dummy_shared_info; /* * Point at some empty memory to start with. We map the real shared_info * page as soon as fixmap is up and running. */ -struct shared_info *HYPERVISOR_shared_info = (void *)&dummy_shared_info; +struct shared_info *HYPERVISOR_shared_info = (void *)&xen_dummy_shared_info; /* * Flag to determine whether vcpu info placement is available on all @@ -98,13 +98,13 @@ struct shared_info *HYPERVISOR_shared_info = (void *)&dummy_shared_info; */ static int have_vcpu_info_placement = 1; -static void __init xen_vcpu_setup(int cpu) +static void xen_vcpu_setup(int cpu) { struct vcpu_register_vcpu_info info; int err; struct vcpu_info *vcpup; - BUG_ON(HYPERVISOR_shared_info == &dummy_shared_info); + BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info); per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; if (!have_vcpu_info_placement) @@ -136,11 +136,41 @@ static void __init xen_vcpu_setup(int cpu) } } +/* + * On restore, set the vcpu placement up again. + * If it fails, then we're in a bad state, since + * we can't back out from using it... + */ +void xen_vcpu_restore(void) +{ + if (have_vcpu_info_placement) { + int cpu; + + for_each_online_cpu(cpu) { + bool other_cpu = (cpu != smp_processor_id()); + + if (other_cpu && + HYPERVISOR_vcpu_op(VCPUOP_down, cpu, NULL)) + BUG(); + + xen_vcpu_setup(cpu); + + if (other_cpu && + HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL)) + BUG(); + } + + BUG_ON(!have_vcpu_info_placement); + } +} + static void __init xen_banner(void) { printk(KERN_INFO "Booting paravirtualized kernel on %s\n", pv_info.name); - printk(KERN_INFO "Hypervisor signature: %s\n", xen_start_info->magic); + printk(KERN_INFO "Hypervisor signature: %s%s\n", + xen_start_info->magic, + xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : ""); } static void xen_cpuid(unsigned int *ax, unsigned int *bx, @@ -235,13 +265,13 @@ static void xen_irq_enable(void) { struct vcpu_info *vcpu; - /* There's a one instruction preempt window here. We need to - make sure we're don't switch CPUs between getting the vcpu - pointer and updating the mask. */ - preempt_disable(); + /* We don't need to worry about being preempted here, since + either a) interrupts are disabled, so no preemption, or b) + the caller is confused and is trying to re-enable interrupts + on an indeterminate processor. */ + vcpu = x86_read_percpu(xen_vcpu); vcpu->evtchn_upcall_mask = 0; - preempt_enable_no_resched(); /* Doesn't matter if we get preempted here, because any pending event will get dealt with anyway. */ @@ -254,7 +284,7 @@ static void xen_irq_enable(void) static void xen_safe_halt(void) { /* Blocking includes an implicit local_irq_enable(). */ - if (HYPERVISOR_sched_op(SCHEDOP_block, 0) != 0) + if (HYPERVISOR_sched_op(SCHEDOP_block, NULL) != 0) BUG(); } @@ -607,6 +637,30 @@ static void xen_flush_tlb_others(const cpumask_t *cpus, struct mm_struct *mm, xen_mc_issue(PARAVIRT_LAZY_MMU); } +static void xen_clts(void) +{ + struct multicall_space mcs; + + mcs = xen_mc_entry(0); + + MULTI_fpu_taskswitch(mcs.mc, 0); + + xen_mc_issue(PARAVIRT_LAZY_CPU); +} + +static void xen_write_cr0(unsigned long cr0) +{ + struct multicall_space mcs; + + /* Only pay attention to cr0.TS; everything else is + ignored. */ + mcs = xen_mc_entry(0); + + MULTI_fpu_taskswitch(mcs.mc, (cr0 & X86_CR0_TS) != 0); + + xen_mc_issue(PARAVIRT_LAZY_CPU); +} + static void xen_write_cr2(unsigned long cr2) { x86_read_percpu(xen_vcpu)->arch.cr2 = cr2; @@ -624,8 +678,10 @@ static unsigned long xen_read_cr2_direct(void) static void xen_write_cr4(unsigned long cr4) { - /* Just ignore cr4 changes; Xen doesn't allow us to do - anything anyway. */ + cr4 &= ~X86_CR4_PGE; + cr4 &= ~X86_CR4_PSE; + + native_write_cr4(cr4); } static unsigned long xen_read_cr3(void) @@ -831,7 +887,7 @@ static __init void xen_pagetable_setup_start(pgd_t *base) PFN_DOWN(__pa(xen_start_info->pt_base))); } -static __init void setup_shared_info(void) +void xen_setup_shared_info(void) { if (!xen_feature(XENFEAT_auto_translated_physmap)) { unsigned long addr = fix_to_virt(FIX_PARAVIRT_BOOTMAP); @@ -854,6 +910,8 @@ static __init void setup_shared_info(void) /* In UP this is as good a place as any to set up shared info */ xen_setup_vcpu_info_placement(); #endif + + xen_setup_mfn_list_list(); } static __init void xen_pagetable_setup_done(pgd_t *base) @@ -866,15 +924,23 @@ static __init void xen_pagetable_setup_done(pgd_t *base) pv_mmu_ops.release_pmd = xen_release_pmd; pv_mmu_ops.set_pte = xen_set_pte; - setup_shared_info(); + xen_setup_shared_info(); /* Actually pin the pagetable down, but we can't set PG_pinned yet because the page structures don't exist yet. */ pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(base))); } +static __init void xen_post_allocator_init(void) +{ + pv_mmu_ops.set_pmd = xen_set_pmd; + pv_mmu_ops.set_pud = xen_set_pud; + + xen_mark_init_mm_pinned(); +} + /* This is called once we have the cpu_possible_map */ -void __init xen_setup_vcpu_info_placement(void) +void xen_setup_vcpu_info_placement(void) { int cpu; @@ -960,7 +1026,7 @@ static const struct pv_init_ops xen_init_ops __initdata = { .banner = xen_banner, .memory_setup = xen_memory_setup, .arch_setup = xen_arch_setup, - .post_allocator_init = xen_mark_init_mm_pinned, + .post_allocator_init = xen_post_allocator_init, }; static const struct pv_time_ops xen_time_ops __initdata = { @@ -978,10 +1044,10 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = { .set_debugreg = xen_set_debugreg, .get_debugreg = xen_get_debugreg, - .clts = native_clts, + .clts = xen_clts, .read_cr0 = native_read_cr0, - .write_cr0 = native_write_cr0, + .write_cr0 = xen_write_cr0, .read_cr4 = native_read_cr4, .read_cr4_safe = native_read_cr4_safe, @@ -1072,9 +1138,13 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .set_pte = NULL, /* see xen_pagetable_setup_* */ .set_pte_at = xen_set_pte_at, - .set_pmd = xen_set_pmd, + .set_pmd = xen_set_pmd_hyper, + + .ptep_modify_prot_start = __ptep_modify_prot_start, + .ptep_modify_prot_commit = __ptep_modify_prot_commit, .pte_val = xen_pte_val, + .pte_flags = native_pte_val, .pgd_val = xen_pgd_val, .make_pte = xen_make_pte, @@ -1082,7 +1152,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .set_pte_atomic = xen_set_pte_atomic, .set_pte_present = xen_set_pte_at, - .set_pud = xen_set_pud, + .set_pud = xen_set_pud_hyper, .pte_clear = xen_pte_clear, .pmd_clear = xen_pmd_clear, @@ -1114,11 +1184,13 @@ static const struct smp_ops xen_smp_ops __initdata = { static void xen_reboot(int reason) { + struct sched_shutdown r = { .reason = reason }; + #ifdef CONFIG_SMP smp_send_stop(); #endif - if (HYPERVISOR_sched_op(SCHEDOP_shutdown, reason)) + if (HYPERVISOR_sched_op(SCHEDOP_shutdown, &r)) BUG(); } @@ -1173,6 +1245,8 @@ asmlinkage void __init xen_start_kernel(void) BUG_ON(memcmp(xen_start_info->magic, "xen-3", 5) != 0); + xen_setup_features(); + /* Install Xen paravirt ops */ pv_info = xen_info; pv_init_ops = xen_init_ops; @@ -1182,17 +1256,20 @@ asmlinkage void __init xen_start_kernel(void) pv_apic_ops = xen_apic_ops; pv_mmu_ops = xen_mmu_ops; + if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) { + pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start; + pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit; + } + machine_ops = xen_machine_ops; #ifdef CONFIG_SMP smp_ops = xen_smp_ops; #endif - xen_setup_features(); - /* Get mfn list */ if (!xen_feature(XENFEAT_auto_translated_physmap)) - phys_to_machine_mapping = (unsigned long *)xen_start_info->mfn_list; + xen_build_dynamic_phys_to_machine(); pgd = (pgd_t *)xen_start_info->pt_base; @@ -1232,8 +1309,11 @@ asmlinkage void __init xen_start_kernel(void) ? __pa(xen_start_info->mod_start) : 0; boot_params.hdr.ramdisk_size = xen_start_info->mod_len; - if (!is_initial_xendomain()) + if (!is_initial_xendomain()) { + add_preferred_console("xenboot", 0, NULL); + add_preferred_console("tty", 0, NULL); add_preferred_console("hvc", 0, NULL); + } /* Start the world */ start_kernel(); diff --git a/arch/x86/xen/manage.c b/arch/x86/xen/manage.c deleted file mode 100644 index aa7af9e6abc..00000000000 --- a/arch/x86/xen/manage.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Handle extern requests for shutdown, reboot and sysrq - */ -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/reboot.h> -#include <linux/sysrq.h> - -#include <xen/xenbus.h> - -#define SHUTDOWN_INVALID -1 -#define SHUTDOWN_POWEROFF 0 -#define SHUTDOWN_SUSPEND 2 -/* Code 3 is SHUTDOWN_CRASH, which we don't use because the domain can only - * report a crash, not be instructed to crash! - * HALT is the same as POWEROFF, as far as we're concerned. The tools use - * the distinction when we return the reason code to them. - */ -#define SHUTDOWN_HALT 4 - -/* Ignore multiple shutdown requests. */ -static int shutting_down = SHUTDOWN_INVALID; - -static void shutdown_handler(struct xenbus_watch *watch, - const char **vec, unsigned int len) -{ - char *str; - struct xenbus_transaction xbt; - int err; - - if (shutting_down != SHUTDOWN_INVALID) - return; - - again: - err = xenbus_transaction_start(&xbt); - if (err) - return; - - str = (char *)xenbus_read(xbt, "control", "shutdown", NULL); - /* Ignore read errors and empty reads. */ - if (XENBUS_IS_ERR_READ(str)) { - xenbus_transaction_end(xbt, 1); - return; - } - - xenbus_write(xbt, "control", "shutdown", ""); - - err = xenbus_transaction_end(xbt, 0); - if (err == -EAGAIN) { - kfree(str); - goto again; - } - - if (strcmp(str, "poweroff") == 0 || - strcmp(str, "halt") == 0) - orderly_poweroff(false); - else if (strcmp(str, "reboot") == 0) - ctrl_alt_del(); - else { - printk(KERN_INFO "Ignoring shutdown request: %s\n", str); - shutting_down = SHUTDOWN_INVALID; - } - - kfree(str); -} - -static void sysrq_handler(struct xenbus_watch *watch, const char **vec, - unsigned int len) -{ - char sysrq_key = '\0'; - struct xenbus_transaction xbt; - int err; - - again: - err = xenbus_transaction_start(&xbt); - if (err) - return; - if (!xenbus_scanf(xbt, "control", "sysrq", "%c", &sysrq_key)) { - printk(KERN_ERR "Unable to read sysrq code in " - "control/sysrq\n"); - xenbus_transaction_end(xbt, 1); - return; - } - - if (sysrq_key != '\0') - xenbus_printf(xbt, "control", "sysrq", "%c", '\0'); - - err = xenbus_transaction_end(xbt, 0); - if (err == -EAGAIN) - goto again; - - if (sysrq_key != '\0') - handle_sysrq(sysrq_key, NULL); -} - -static struct xenbus_watch shutdown_watch = { - .node = "control/shutdown", - .callback = shutdown_handler -}; - -static struct xenbus_watch sysrq_watch = { - .node = "control/sysrq", - .callback = sysrq_handler -}; - -static int setup_shutdown_watcher(void) -{ - int err; - - err = register_xenbus_watch(&shutdown_watch); - if (err) { - printk(KERN_ERR "Failed to set shutdown watcher\n"); - return err; - } - - err = register_xenbus_watch(&sysrq_watch); - if (err) { - printk(KERN_ERR "Failed to set sysrq watcher\n"); - return err; - } - - return 0; -} - -static int shutdown_event(struct notifier_block *notifier, - unsigned long event, - void *data) -{ - setup_shutdown_watcher(); - return NOTIFY_DONE; -} - -static int __init setup_shutdown_event(void) -{ - static struct notifier_block xenstore_notifier = { - .notifier_call = shutdown_event - }; - register_xenstore_notifier(&xenstore_notifier); - - return 0; -} - -subsys_initcall(setup_shutdown_event); diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 4e527e7893a..42b3b9ed641 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -56,6 +56,131 @@ #include "multicalls.h" #include "mmu.h" +#define P2M_ENTRIES_PER_PAGE (PAGE_SIZE / sizeof(unsigned long)) +#define TOP_ENTRIES (MAX_DOMAIN_PAGES / P2M_ENTRIES_PER_PAGE) + +/* Placeholder for holes in the address space */ +static unsigned long p2m_missing[P2M_ENTRIES_PER_PAGE] + __attribute__((section(".data.page_aligned"))) = + { [ 0 ... P2M_ENTRIES_PER_PAGE-1 ] = ~0UL }; + + /* Array of pointers to pages containing p2m entries */ +static unsigned long *p2m_top[TOP_ENTRIES] + __attribute__((section(".data.page_aligned"))) = + { [ 0 ... TOP_ENTRIES - 1] = &p2m_missing[0] }; + +/* Arrays of p2m arrays expressed in mfns used for save/restore */ +static unsigned long p2m_top_mfn[TOP_ENTRIES] + __attribute__((section(".bss.page_aligned"))); + +static unsigned long p2m_top_mfn_list[ + PAGE_ALIGN(TOP_ENTRIES / P2M_ENTRIES_PER_PAGE)] + __attribute__((section(".bss.page_aligned"))); + +static inline unsigned p2m_top_index(unsigned long pfn) +{ + BUG_ON(pfn >= MAX_DOMAIN_PAGES); + return pfn / P2M_ENTRIES_PER_PAGE; +} + +static inline unsigned p2m_index(unsigned long pfn) +{ + return pfn % P2M_ENTRIES_PER_PAGE; +} + +/* Build the parallel p2m_top_mfn structures */ +void xen_setup_mfn_list_list(void) +{ + unsigned pfn, idx; + + for(pfn = 0; pfn < MAX_DOMAIN_PAGES; pfn += P2M_ENTRIES_PER_PAGE) { + unsigned topidx = p2m_top_index(pfn); + + p2m_top_mfn[topidx] = virt_to_mfn(p2m_top[topidx]); + } + + for(idx = 0; idx < ARRAY_SIZE(p2m_top_mfn_list); idx++) { + unsigned topidx = idx * P2M_ENTRIES_PER_PAGE; + p2m_top_mfn_list[idx] = virt_to_mfn(&p2m_top_mfn[topidx]); + } + + BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info); + + HYPERVISOR_shared_info->arch.pfn_to_mfn_frame_list_list = + virt_to_mfn(p2m_top_mfn_list); + HYPERVISOR_shared_info->arch.max_pfn = xen_start_info->nr_pages; +} + +/* Set up p2m_top to point to the domain-builder provided p2m pages */ +void __init xen_build_dynamic_phys_to_machine(void) +{ + unsigned long *mfn_list = (unsigned long *)xen_start_info->mfn_list; + unsigned long max_pfn = min(MAX_DOMAIN_PAGES, xen_start_info->nr_pages); + unsigned pfn; + + for(pfn = 0; pfn < max_pfn; pfn += P2M_ENTRIES_PER_PAGE) { + unsigned topidx = p2m_top_index(pfn); + + p2m_top[topidx] = &mfn_list[pfn]; + } +} + +unsigned long get_phys_to_machine(unsigned long pfn) +{ + unsigned topidx, idx; + + if (unlikely(pfn >= MAX_DOMAIN_PAGES)) + return INVALID_P2M_ENTRY; + + topidx = p2m_top_index(pfn); + idx = p2m_index(pfn); + return p2m_top[topidx][idx]; +} +EXPORT_SYMBOL_GPL(get_phys_to_machine); + +static void alloc_p2m(unsigned long **pp, unsigned long *mfnp) +{ + unsigned long *p; + unsigned i; + + p = (void *)__get_free_page(GFP_KERNEL | __GFP_NOFAIL); + BUG_ON(p == NULL); + + for(i = 0; i < P2M_ENTRIES_PER_PAGE; i++) + p[i] = INVALID_P2M_ENTRY; + + if (cmpxchg(pp, p2m_missing, p) != p2m_missing) + free_page((unsigned long)p); + else + *mfnp = virt_to_mfn(p); +} + +void set_phys_to_machine(unsigned long pfn, unsigned long mfn) +{ + unsigned topidx, idx; + + if (unlikely(xen_feature(XENFEAT_auto_translated_physmap))) { + BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY); + return; + } + + if (unlikely(pfn >= MAX_DOMAIN_PAGES)) { + BUG_ON(mfn != INVALID_P2M_ENTRY); + return; + } + + topidx = p2m_top_index(pfn); + if (p2m_top[topidx] == p2m_missing) { + /* no need to allocate a page to store an invalid entry */ + if (mfn == INVALID_P2M_ENTRY) + return; + alloc_p2m(&p2m_top[topidx], &p2m_top_mfn[topidx]); + } + + idx = p2m_index(pfn); + p2m_top[topidx][idx] = mfn; +} + xmaddr_t arbitrary_virt_to_machine(unsigned long address) { unsigned int level; @@ -98,24 +223,60 @@ void make_lowmem_page_readwrite(void *vaddr) } -void xen_set_pmd(pmd_t *ptr, pmd_t val) +static bool page_pinned(void *ptr) +{ + struct page *page = virt_to_page(ptr); + + return PagePinned(page); +} + +static void extend_mmu_update(const struct mmu_update *update) { struct multicall_space mcs; struct mmu_update *u; - preempt_disable(); + mcs = xen_mc_extend_args(__HYPERVISOR_mmu_update, sizeof(*u)); + + if (mcs.mc != NULL) + mcs.mc->args[1]++; + else { + mcs = __xen_mc_entry(sizeof(*u)); + MULTI_mmu_update(mcs.mc, mcs.args, 1, NULL, DOMID_SELF); + } - mcs = xen_mc_entry(sizeof(*u)); u = mcs.args; - u->ptr = virt_to_machine(ptr).maddr; - u->val = pmd_val_ma(val); - MULTI_mmu_update(mcs.mc, u, 1, NULL, DOMID_SELF); + *u = *update; +} + +void xen_set_pmd_hyper(pmd_t *ptr, pmd_t val) +{ + struct mmu_update u; + + preempt_disable(); + + xen_mc_batch(); + + u.ptr = virt_to_machine(ptr).maddr; + u.val = pmd_val_ma(val); + extend_mmu_update(&u); xen_mc_issue(PARAVIRT_LAZY_MMU); preempt_enable(); } +void xen_set_pmd(pmd_t *ptr, pmd_t val) +{ + /* If page is not pinned, we can just update the entry + directly */ + if (!page_pinned(ptr)) { + *ptr = val; + return; + } + + xen_set_pmd_hyper(ptr, val); +} + /* * Associate a virtual page frame with a given physical page frame * and protection flags for that frame. @@ -179,6 +340,26 @@ out: preempt_enable(); } +pte_t xen_ptep_modify_prot_start(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + /* Just return the pte as-is. We preserve the bits on commit */ + return *ptep; +} + +void xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte) +{ + struct mmu_update u; + + xen_mc_batch(); + + u.ptr = virt_to_machine(ptep).maddr | MMU_PT_UPDATE_PRESERVE_AD; + u.val = pte_val_ma(pte); + extend_mmu_update(&u); + + xen_mc_issue(PARAVIRT_LAZY_MMU); +} + /* Assume pteval_t is equivalent to all the other *val_t types. */ static pteval_t pte_mfn_to_pfn(pteval_t val) { @@ -229,24 +410,35 @@ pmdval_t xen_pmd_val(pmd_t pmd) return pte_mfn_to_pfn(pmd.pmd); } -void xen_set_pud(pud_t *ptr, pud_t val) +void xen_set_pud_hyper(pud_t *ptr, pud_t val) { - struct multicall_space mcs; - struct mmu_update *u; + struct mmu_update u; preempt_disable(); - mcs = xen_mc_entry(sizeof(*u)); - u = mcs.args; - u->ptr = virt_to_machine(ptr).maddr; - u->val = pud_val_ma(val); - MULTI_mmu_update(mcs.mc, u, 1, NULL, DOMID_SELF); + xen_mc_batch(); + + u.ptr = virt_to_machine(ptr).maddr; + u.val = pud_val_ma(val); + extend_mmu_update(&u); xen_mc_issue(PARAVIRT_LAZY_MMU); preempt_enable(); } +void xen_set_pud(pud_t *ptr, pud_t val) +{ + /* If page is not pinned, we can just update the entry + directly */ + if (!page_pinned(ptr)) { + *ptr = val; + return; + } + + xen_set_pud_hyper(ptr, val); +} + void xen_set_pte(pte_t *ptep, pte_t pte) { ptep->pte_high = pte.pte_high; @@ -268,7 +460,7 @@ void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) void xen_pmd_clear(pmd_t *pmdp) { - xen_set_pmd(pmdp, __pmd(0)); + set_pmd(pmdp, __pmd(0)); } pmd_t xen_make_pmd(pmdval_t pmd) @@ -441,6 +633,29 @@ void xen_pgd_pin(pgd_t *pgd) xen_mc_issue(0); } +/* + * On save, we need to pin all pagetables to make sure they get their + * mfns turned into pfns. Search the list for any unpinned pgds and pin + * them (unpinned pgds are not currently in use, probably because the + * process is under construction or destruction). + */ +void xen_mm_pin_all(void) +{ + unsigned long flags; + struct page *page; + + spin_lock_irqsave(&pgd_lock, flags); + + list_for_each_entry(page, &pgd_list, lru) { + if (!PagePinned(page)) { + xen_pgd_pin((pgd_t *)page_address(page)); + SetPageSavePinned(page); + } + } + + spin_unlock_irqrestore(&pgd_lock, flags); +} + /* The init_mm pagetable is really pinned as soon as its created, but that's before we have page structures to store the bits. So do all the book-keeping now. */ @@ -498,6 +713,29 @@ static void xen_pgd_unpin(pgd_t *pgd) xen_mc_issue(0); } +/* + * On resume, undo any pinning done at save, so that the rest of the + * kernel doesn't see any unexpected pinned pagetables. + */ +void xen_mm_unpin_all(void) +{ + unsigned long flags; + struct page *page; + + spin_lock_irqsave(&pgd_lock, flags); + + list_for_each_entry(page, &pgd_list, lru) { + if (PageSavePinned(page)) { + BUG_ON(!PagePinned(page)); + printk("unpinning pinned %p\n", page_address(page)); + xen_pgd_unpin((pgd_t *)page_address(page)); + ClearPageSavePinned(page); + } + } + + spin_unlock_irqrestore(&pgd_lock, flags); +} + void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next) { spin_lock(&next->page_table_lock); @@ -591,7 +829,7 @@ void xen_exit_mmap(struct mm_struct *mm) spin_lock(&mm->page_table_lock); /* pgd may not be pinned in the error exit path of execve */ - if (PagePinned(virt_to_page(mm->pgd))) + if (page_pinned(mm->pgd)) xen_pgd_unpin(mm->pgd); spin_unlock(&mm->page_table_lock); diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h index 5fe961caffd..297bf9f5b8b 100644 --- a/arch/x86/xen/mmu.h +++ b/arch/x86/xen/mmu.h @@ -25,10 +25,6 @@ enum pt_level { void set_pte_mfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags); -void xen_set_pte(pte_t *ptep, pte_t pteval); -void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pteval); -void xen_set_pmd(pmd_t *pmdp, pmd_t pmdval); void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next); void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm); @@ -45,11 +41,19 @@ pte_t xen_make_pte(pteval_t); pmd_t xen_make_pmd(pmdval_t); pgd_t xen_make_pgd(pgdval_t); +void xen_set_pte(pte_t *ptep, pte_t pteval); void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval); void xen_set_pte_atomic(pte_t *ptep, pte_t pte); +void xen_set_pmd(pmd_t *pmdp, pmd_t pmdval); void xen_set_pud(pud_t *ptr, pud_t val); +void xen_set_pmd_hyper(pmd_t *pmdp, pmd_t pmdval); +void xen_set_pud_hyper(pud_t *ptr, pud_t val); void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); void xen_pmd_clear(pmd_t *pmdp); +pte_t xen_ptep_modify_prot_start(struct mm_struct *mm, unsigned long addr, pte_t *ptep); +void xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte); + #endif /* _XEN_MMU_H */ diff --git a/arch/x86/xen/multicalls.c b/arch/x86/xen/multicalls.c index 5791eb2e375..3c63c4da7ed 100644 --- a/arch/x86/xen/multicalls.c +++ b/arch/x86/xen/multicalls.c @@ -29,14 +29,14 @@ #define MC_DEBUG 1 #define MC_BATCH 32 -#define MC_ARGS (MC_BATCH * 16 / sizeof(u64)) +#define MC_ARGS (MC_BATCH * 16) struct mc_buffer { struct multicall_entry entries[MC_BATCH]; #if MC_DEBUG struct multicall_entry debug[MC_BATCH]; #endif - u64 args[MC_ARGS]; + unsigned char args[MC_ARGS]; struct callback { void (*fn)(void *); void *data; @@ -107,20 +107,48 @@ struct multicall_space __xen_mc_entry(size_t args) { struct mc_buffer *b = &__get_cpu_var(mc_buffer); struct multicall_space ret; - unsigned argspace = (args + sizeof(u64) - 1) / sizeof(u64); + unsigned argidx = roundup(b->argidx, sizeof(u64)); BUG_ON(preemptible()); - BUG_ON(argspace > MC_ARGS); + BUG_ON(b->argidx > MC_ARGS); if (b->mcidx == MC_BATCH || - (b->argidx + argspace) > MC_ARGS) + (argidx + args) > MC_ARGS) { xen_mc_flush(); + argidx = roundup(b->argidx, sizeof(u64)); + } ret.mc = &b->entries[b->mcidx]; b->mcidx++; + ret.args = &b->args[argidx]; + b->argidx = argidx + args; + + BUG_ON(b->argidx > MC_ARGS); + return ret; +} + +struct multicall_space xen_mc_extend_args(unsigned long op, size_t size) +{ + struct mc_buffer *b = &__get_cpu_var(mc_buffer); + struct multicall_space ret = { NULL, NULL }; + + BUG_ON(preemptible()); + BUG_ON(b->argidx > MC_ARGS); + + if (b->mcidx == 0) + return ret; + + if (b->entries[b->mcidx - 1].op != op) + return ret; + + if ((b->argidx + size) > MC_ARGS) + return ret; + + ret.mc = &b->entries[b->mcidx - 1]; ret.args = &b->args[b->argidx]; - b->argidx += argspace; + b->argidx += size; + BUG_ON(b->argidx > MC_ARGS); return ret; } diff --git a/arch/x86/xen/multicalls.h b/arch/x86/xen/multicalls.h index 8bae996d99a..85893824161 100644 --- a/arch/x86/xen/multicalls.h +++ b/arch/x86/xen/multicalls.h @@ -45,4 +45,16 @@ static inline void xen_mc_issue(unsigned mode) /* Set up a callback to be called when the current batch is flushed */ void xen_mc_callback(void (*fn)(void *), void *data); +/* + * Try to extend the arguments of the previous multicall command. The + * previous command's op must match. If it does, then it attempts to + * extend the argument space allocated to the multicall entry by + * arg_size bytes. + * + * The returned multicall_space will return with mc pointing to the + * command on success, or NULL on failure, and args pointing to the + * newly allocated space. + */ +struct multicall_space xen_mc_extend_args(unsigned long op, size_t arg_size); + #endif /* _XEN_MULTICALLS_H */ diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 82517e4a752..488447878a9 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -16,6 +16,7 @@ #include <asm/xen/hypervisor.h> #include <asm/xen/hypercall.h> +#include <xen/page.h> #include <xen/interface/callback.h> #include <xen/interface/physdev.h> #include <xen/features.h> @@ -27,8 +28,6 @@ extern const char xen_hypervisor_callback[]; extern const char xen_failsafe_callback[]; -unsigned long *phys_to_machine_mapping; -EXPORT_SYMBOL(phys_to_machine_mapping); /** * machine_specific_memory_setup - Hook for machine specific memory setup. @@ -38,6 +37,8 @@ char * __init xen_memory_setup(void) { unsigned long max_pfn = xen_start_info->nr_pages; + max_pfn = min(MAX_DOMAIN_PAGES, max_pfn); + e820.nr_map = 0; add_memory_region(0, LOWMEMSIZE(), E820_RAM); add_memory_region(HIGH_MEMORY, PFN_PHYS(max_pfn)-HIGH_MEMORY, E820_RAM); diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 94e69000f98..d2e3c20127d 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -35,7 +35,7 @@ #include "xen-ops.h" #include "mmu.h" -static cpumask_t xen_cpu_initialized_map; +cpumask_t xen_cpu_initialized_map; static DEFINE_PER_CPU(int, resched_irq) = -1; static DEFINE_PER_CPU(int, callfunc_irq) = -1; static DEFINE_PER_CPU(int, debug_irq) = -1; @@ -65,6 +65,12 @@ static struct call_data_struct *call_data; */ static irqreturn_t xen_reschedule_interrupt(int irq, void *dev_id) { +#ifdef CONFIG_X86_32 + __get_cpu_var(irq_stat).irq_resched_count++; +#else + add_pda(irq_resched_count, 1); +#endif + return IRQ_HANDLED; } diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c new file mode 100644 index 00000000000..251669a932d --- /dev/null +++ b/arch/x86/xen/suspend.c @@ -0,0 +1,45 @@ +#include <linux/types.h> + +#include <xen/interface/xen.h> +#include <xen/grant_table.h> +#include <xen/events.h> + +#include <asm/xen/hypercall.h> +#include <asm/xen/page.h> + +#include "xen-ops.h" +#include "mmu.h" + +void xen_pre_suspend(void) +{ + xen_start_info->store_mfn = mfn_to_pfn(xen_start_info->store_mfn); + xen_start_info->console.domU.mfn = + mfn_to_pfn(xen_start_info->console.domU.mfn); + + BUG_ON(!irqs_disabled()); + + HYPERVISOR_shared_info = &xen_dummy_shared_info; + if (HYPERVISOR_update_va_mapping(fix_to_virt(FIX_PARAVIRT_BOOTMAP), + __pte_ma(0), 0)) + BUG(); +} + +void xen_post_suspend(int suspend_cancelled) +{ + xen_setup_shared_info(); + + if (suspend_cancelled) { + xen_start_info->store_mfn = + pfn_to_mfn(xen_start_info->store_mfn); + xen_start_info->console.domU.mfn = + pfn_to_mfn(xen_start_info->console.domU.mfn); + } else { +#ifdef CONFIG_SMP + xen_cpu_initialized_map = cpu_online_map; +#endif + xen_vcpu_restore(); + xen_timer_resume(); + } + +} + diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index 41e217503c9..64f0038b955 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -459,6 +459,19 @@ void xen_setup_cpu_clockevents(void) clockevents_register_device(&__get_cpu_var(xen_clock_events)); } +void xen_timer_resume(void) +{ + int cpu; + + if (xen_clockevent != &xen_vcpuop_clockevent) + return; + + for_each_online_cpu(cpu) { + if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL)) + BUG(); + } +} + __init void xen_time_init(void) { int cpu = smp_processor_id(); diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S index 6ec3b4f7719..7c0cf6320a0 100644 --- a/arch/x86/xen/xen-head.S +++ b/arch/x86/xen/xen-head.S @@ -7,6 +7,7 @@ #include <linux/init.h> #include <asm/boot.h> #include <xen/interface/elfnote.h> +#include <asm/xen/interface.h> __INIT ENTRY(startup_xen) @@ -32,5 +33,9 @@ ENTRY(hypercall_page) ELFNOTE(Xen, XEN_ELFNOTE_FEATURES, .asciz "!writable_page_tables|pae_pgdir_above_4gb") ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "yes") ELFNOTE(Xen, XEN_ELFNOTE_LOADER, .asciz "generic") + ELFNOTE(Xen, XEN_ELFNOTE_L1_MFN_VALID, + .quad _PAGE_PRESENT; .quad _PAGE_PRESENT) + ELFNOTE(Xen, XEN_ELFNOTE_SUSPEND_CANCEL, .long 1) + ELFNOTE(Xen, XEN_ELFNOTE_HV_START_LOW, .long __HYPERVISOR_VIRT_START) #endif /*CONFIG_XEN */ diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index f1063ae0803..9a055592a30 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -9,18 +9,26 @@ extern const char xen_hypervisor_callback[]; extern const char xen_failsafe_callback[]; +struct trap_info; void xen_copy_trap_info(struct trap_info *traps); DECLARE_PER_CPU(unsigned long, xen_cr3); DECLARE_PER_CPU(unsigned long, xen_current_cr3); extern struct start_info *xen_start_info; +extern struct shared_info xen_dummy_shared_info; extern struct shared_info *HYPERVISOR_shared_info; +void xen_setup_mfn_list_list(void); +void xen_setup_shared_info(void); + char * __init xen_memory_setup(void); void __init xen_arch_setup(void); void __init xen_init_IRQ(void); void xen_enable_sysenter(void); +void xen_vcpu_restore(void); + +void __init xen_build_dynamic_phys_to_machine(void); void xen_setup_timer(int cpu); void xen_setup_cpu_clockevents(void); @@ -29,6 +37,7 @@ void __init xen_time_init(void); unsigned long xen_get_wallclock(void); int xen_set_wallclock(unsigned long time); unsigned long long xen_sched_clock(void); +void xen_timer_resume(void); irqreturn_t xen_debug_interrupt(int irq, void *dev_id); @@ -54,6 +63,8 @@ int xen_smp_call_function_single(int cpu, void (*func) (void *info), void *info, int xen_smp_call_function_mask(cpumask_t mask, void (*func)(void *), void *info, int wait); +extern cpumask_t xen_cpu_initialized_map; + /* Declare an asm function, along with symbols needed to make it inlineable */ |