diff options
Diffstat (limited to 'arch')
69 files changed, 309 insertions, 195 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b1b27525b24..a91009c6187 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -589,6 +589,7 @@ config ARCH_ORION5X select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS + select NEED_MACH_IO_H select PLAT_ORION help Support for the following Marvell Orion 5x series SoCs: diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index f2ab4ea7cc0..581cb081cb0 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -44,6 +44,8 @@ compatible = "ti,omap2-intc"; interrupt-controller; #interrupt-cells = <1>; + ti,intc-size = <96>; + reg = <0x480FE000 0x1000>; }; uart1: serial@4806a000 { diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 573be57d3d2..6f6d13f91e4 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -212,7 +212,7 @@ config MACH_SMDKV310 select EXYNOS_DEV_SYSMMU select EXYNOS4_DEV_AHCI select SAMSUNG_DEV_KEYPAD - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select SAMSUNG_DEV_PWM select EXYNOS4_DEV_USB_OHCI select EXYNOS4_SETUP_FIMD0 @@ -264,7 +264,7 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_ONENAND select S5P_DEV_TV select EXYNOS_DEV_SYSMMU - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select EXYNOS_DEV_DRM select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 @@ -303,7 +303,7 @@ config MACH_NURI select S5P_DEV_MFC select S5P_DEV_USB_EHCI select S5P_SETUP_MIPIPHY - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select EXYNOS_DEV_DRM select EXYNOS4_SETUP_FIMC select EXYNOS4_SETUP_FIMD0 @@ -341,7 +341,7 @@ config MACH_ORIGEN select SAMSUNG_DEV_PWM select EXYNOS_DEV_DRM select EXYNOS_DEV_SYSMMU - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select EXYNOS4_DEV_USB_OHCI select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_SDHCI diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 17dc66a085a..e1a17ac7b3b 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -152,13 +152,14 @@ enum mx6q_clks { ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, - ssi2_ipg, ssi3_ipg, clk_max + ssi2_ipg, ssi3_ipg, rom, + clk_max }; static struct clk *clk[clk_max]; static enum mx6q_clks const clks_init_on[] __initconst = { - mmdc_ch0_axi, mmdc_ch1_axi, + mmdc_ch0_axi, rom, }; int __init mx6q_clocks_init(void) @@ -364,6 +365,7 @@ int __init mx6q_clocks_init(void) clk[gpmi_bch] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26); clk[gpmi_io] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28); clk[gpmi_apb] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30); + clk[rom] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0); clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4); clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index 2222c573951..b0d3cc49269 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -20,9 +20,6 @@ #include <linux/mv643xx_eth.h> #include <linux/gpio.h> #include <linux/leds.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <linux/spi/orion_spi.h> #include <linux/i2c.h> #include <linux/input.h> #include <linux/gpio_keys.h> diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index e1d2c6def5e..f261cd24264 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -159,6 +159,7 @@ static struct clk __init *clk_register_gate_fn(struct device *dev, gate_fn->gate.flags = clk_gate_flags; gate_fn->gate.lock = lock; gate_fn->gate.hw.init = &init; + gate_fn->fn = fn; /* ops is the gate ops, but with our disable function */ if (clk_gate_fn_ops.disable != clk_gate_fn_disable) { diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index 3eee37a3b50..a115142f869 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -38,6 +38,7 @@ #define IRQ_MASK_HIGH_OFF 0x0014 #define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) #define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) #define L2_WRITETHROUGH 0x00000010 diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index fede3d503ef..c5b68510776 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -80,6 +80,7 @@ #define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) #define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) +#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x20000) #define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000) diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 70a81f900bb..53c39d239d6 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -97,11 +97,6 @@ __init board_onenand_init(struct mtd_partition *onenand_parts, gpmc_onenand_init(&board_onenand_data); } -#else -void -__init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs) -{ -} #endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */ #if defined(CONFIG_MTD_NAND_OMAP2) || \ diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 8ca14e88a31..2c5d0ed7528 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -83,11 +83,9 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data tusb_data = { -#if defined(CONFIG_USB_MUSB_OTG) +#ifdef CONFIG_USB_GADGET_MUSB_HDRC .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_PERIPHERAL) - .mode = MUSB_PERIPHERAL, -#else /* defined(CONFIG_USB_MUSB_HOST) */ +#else .mode = MUSB_HOST, #endif .set_power = tusb_set_power, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 79c6909eeb7..580fd17208d 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -81,13 +81,13 @@ static u8 omap3_beagle_version; static struct { int mmc1_gpio_wp; int usb_pwr_level; - int reset_gpio; + int dvi_pd_gpio; int usr_button_gpio; int mmc_caps; } beagle_config = { .mmc1_gpio_wp = -EINVAL, .usb_pwr_level = GPIOF_OUT_INIT_LOW, - .reset_gpio = 129, + .dvi_pd_gpio = -EINVAL, .usr_button_gpio = 4, .mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, }; @@ -126,21 +126,21 @@ static void __init omap3_beagle_init_rev(void) printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX; beagle_config.mmc1_gpio_wp = 29; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 6: printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3; beagle_config.mmc1_gpio_wp = 23; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 5: printk(KERN_INFO "OMAP3 Beagle Rev: C4\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C4; beagle_config.mmc1_gpio_wp = 23; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 0: @@ -274,11 +274,9 @@ static int beagle_twl_gpio_setup(struct device *dev, if (r) pr_err("%s: unable to configure nDVI_PWR_EN\n", __func__); - r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH, - "DVI_LDO_EN"); - if (r) - pr_err("%s: unable to configure DVI_LDO_EN\n", - __func__); + + beagle_config.dvi_pd_gpio = gpio + 2; + } else { /* * REVISIT: need ehci-omap hooks for external VBUS @@ -287,7 +285,7 @@ static int beagle_twl_gpio_setup(struct device *dev, if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) pr_err("%s: unable to configure EHCI_nOC\n", __func__); } - dvi_panel.power_down_gpio = beagle_config.reset_gpio; + dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio; gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, "nEN_USB_PWR"); @@ -499,7 +497,7 @@ static void __init omap3_beagle_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_init_rev(); - if (beagle_config.mmc1_gpio_wp != -EINVAL) + if (gpio_is_valid(beagle_config.mmc1_gpio_wp)) omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); mmc[0].caps = beagle_config.mmc_caps; omap_hsmmc_init(mmc); @@ -510,15 +508,13 @@ static void __init omap3_beagle_init(void) platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); + if (gpio_is_valid(beagle_config.dvi_pd_gpio)) + omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT); omap_display_init(&beagle_dss_data); omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); - omap_mux_init_gpio(170, OMAP_PIN_INPUT); - /* REVISIT leave DVI powered down until it's needed ... */ - gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD"); - usb_musb_init(NULL); usbhs_init(&usbhs_bdata); omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 2172f660384..ba6f9a0a43e 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -84,6 +84,7 @@ static struct clk slimbus_clk = { static struct clk sys_32k_ck = { .name = "sys_32k_ck", + .clkdm_name = "prm_clkdm", .rate = 32768, .ops = &clkops_null, }; @@ -512,6 +513,7 @@ static struct clk ddrphy_ck = { .name = "ddrphy_ck", .parent = &dpll_core_m2_ck, .ops = &clkops_null, + .clkdm_name = "l3_emif_clkdm", .fixed_div = 2, .recalc = &omap_fixed_divisor_recalc, }; @@ -769,6 +771,7 @@ static const struct clksel dpll_mpu_m2_div[] = { static struct clk dpll_mpu_m2_ck = { .name = "dpll_mpu_m2_ck", .parent = &dpll_mpu_ck, + .clkdm_name = "cm_clkdm", .clksel = dpll_mpu_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, @@ -1149,6 +1152,7 @@ static const struct clksel l3_div_div[] = { static struct clk l3_div_ck = { .name = "l3_div_ck", .parent = &div_core_ck, + .clkdm_name = "cm_clkdm", .clksel = l3_div_div, .clksel_reg = OMAP4430_CM_CLKSEL_CORE, .clksel_mask = OMAP4430_CLKSEL_L3_MASK, @@ -2824,6 +2828,7 @@ static const struct clksel trace_clk_div_div[] = { static struct clk trace_clk_div_ck = { .name = "trace_clk_div_ck", .parent = &pmd_trace_clk_mux_ck, + .clkdm_name = "emu_sys_clkdm", .clksel = trace_clk_div_div, .clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL, .clksel_mask = OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK, @@ -3412,9 +3417,12 @@ int __init omap4xxx_clk_init(void) if (cpu_is_omap443x()) { cpu_mask = RATE_IN_4430; cpu_clkflg = CK_443X; - } else if (cpu_is_omap446x()) { + } else if (cpu_is_omap446x() || cpu_is_omap447x()) { cpu_mask = RATE_IN_4460 | RATE_IN_4430; cpu_clkflg = CK_446X | CK_443X; + + if (cpu_is_omap447x()) + pr_warn("WARNING: OMAP4470 clock data incomplete!\n"); } else { return 0; } diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index a7bc096bd40..f24e3f7a2bb 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -22,4 +22,15 @@ */ #define MAX_MODULE_READY_TIME 2000 +/* + * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for + * the PRCM to request that a module enter the inactive state in the + * case of OMAP2 & 3. In the case of OMAP4 this is the max duration + * in microseconds for the module to reach the inactive state from + * a functional state. + * XXX FSUSB on OMAP4430 takes ~4ms to idle after reset during + * kernel init. + */ +#define MAX_MODULE_DISABLE_TIME 5000 + #endif diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index 8c86d294b1a..1a39945d9ff 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -313,9 +313,9 @@ int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_off omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) == CLKCTRL_IDLEST_DISABLED), - MAX_MODULE_READY_TIME, i); + MAX_MODULE_DISABLE_TIME, i); - return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; + return (i < MAX_MODULE_DISABLE_TIME) ? 0 : -EBUSY; } /** diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 4b46b91cca5..9fe6829f4c1 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -41,6 +41,7 @@ #include "control.h" #include "mux.h" #include "prm.h" +#include "common.h" #define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */ #define OMAP_MUX_BASE_SZ 0x5ca diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index bf86f7e8f91..773193670ea 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -530,7 +530,7 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v) if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) _set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v); if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP) - _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v); + _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v); /* XXX test pwrdm_get_wken for this hwmod's subsystem */ diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 950454a3fa3..f30e861ce6d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -393,8 +393,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_counter_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0004, .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), + .idlemodes = (SIDLE_FORCE | SIDLE_NO), .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -854,6 +853,11 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { .name = "dss_hdmi", .class = &omap44xx_hdmi_hwmod_class, .clkdm_name = "l3_dss_clkdm", + /* + * HDMI audio requires to use no-idle mode. Hence, + * set idle mode by software. + */ + .flags = HWMOD_SWSUP_SIDLE, .mpu_irqs = omap44xx_dss_hdmi_irqs, .sdma_reqs = omap44xx_dss_hdmi_sdma_reqs, .main_clk = "dss_48mhz_clk", diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 4c90477e6f8..d52651a05da 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -239,21 +239,15 @@ void am35x_set_mode(u8 musb_mode) devconf2 &= ~CONF2_OTGMODE; switch (musb_mode) { -#ifdef CONFIG_USB_MUSB_HDRC_HCD case MUSB_HOST: /* Force VBUS valid, ID = 0 */ devconf2 |= CONF2_FORCE_HOST; break; -#endif -#ifdef CONFIG_USB_GADGET_MUSB_HDRC case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */ devconf2 |= CONF2_FORCE_DEVICE; break; -#endif -#ifdef CONFIG_USB_MUSB_OTG case MUSB_OTG: /* Don't override the VBUS/ID comparators */ devconf2 |= CONF2_NO_OVERRIDE; break; -#endif default: pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode); } diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index b19d1b43c12..c4a57685666 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -41,12 +41,10 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data musb_plat = { -#ifdef CONFIG_USB_MUSB_OTG +#ifdef CONFIG_USB_GADGET_MUSB_HDRC .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_HDRC_HCD) +#else .mode = MUSB_HOST, -#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) - .mode = MUSB_PERIPHERAL, #endif /* .clock is set dynamically */ .config = &musb_config, diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index db84a46ce7f..805bea6edf1 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -300,7 +300,7 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, printk(error, 3, status); return status; } - tusb_resources[2].start = irq + IH_GPIO_BASE; + tusb_resources[2].start = gpio_to_irq(irq); /* set up memory timings ... can speed them up later */ if (!ps_refclk) { diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h index 96484bcd34c..11a3c1e9801 100644 --- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h +++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h @@ -35,5 +35,5 @@ #define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204) #define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) - +#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE | 0x300) #endif diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h new file mode 100644 index 00000000000..1aa5d0a50a0 --- /dev/null +++ b/arch/arm/mach-orion5x/include/mach/io.h @@ -0,0 +1,22 @@ +/* + * arch/arm/mach-orion5x/include/mach/io.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H + +#include <mach/orion5x.h> +#include <asm/sizes.h> + +#define IO_SPACE_LIMIT SZ_2M +static inline void __iomem *__io(unsigned long addr) +{ + return (void __iomem *)(addr + ORION5X_PCIE_IO_VIRT_BASE); +} + +#define __io(a) __io(a) +#endif diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index 2745f5d95b3..683e085ce16 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -82,6 +82,7 @@ #define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100) #define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000) +#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x20000) #define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000) diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 9e37026ef9d..9bd135531d7 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -779,6 +779,7 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva") .init_irq = r8a7740_init_irq, .handle_irq = shmobile_handle_irq_intc, .init_machine = eva_init, + .init_late = shmobile_init_late, .timer = &shmobile_timer, .dt_compat = eva_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c index 7bc5e7d39f9..6a33cf39342 100644 --- a/arch/arm/mach-shmobile/board-kzm9d.c +++ b/arch/arm/mach-shmobile/board-kzm9d.c @@ -80,6 +80,7 @@ DT_MACHINE_START(KZM9D_DT, "kzm9d") .init_irq = emev2_init_irq, .handle_irq = gic_handle_irq, .init_machine = kzm9d_add_standard_devices, + .init_late = shmobile_init_late, .timer = &shmobile_timer, .dt_compat = kzm9d_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index d8e33b68283..c0ae815e7be 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -455,6 +455,7 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g") .init_irq = sh73a0_init_irq, .handle_irq = gic_handle_irq, .init_machine = kzm_init, + .init_late = shmobile_init_late, .timer = &shmobile_timer, .dt_compat = kzm9g_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index b577f7c4467..150122a4463 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1512,6 +1512,9 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_SDHID0_1, NULL); gpio_request(GPIO_FN_SDHID0_0, NULL); + /* SDHI0 PORT172 card-detect IRQ26 */ + gpio_request(GPIO_FN_IRQ26_172, NULL); + #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) /* enable SDHI1 */ gpio_request(GPIO_FN_SDHICMD1, NULL); diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 472d1f5361e..3946c4ba2aa 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -475,9 +475,9 @@ static struct clk *late_main_clks[] = { enum { MSTP001, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100, - MSTP219, + MSTP219, MSTP218, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP331, MSTP329, MSTP325, MSTP323, MSTP318, + MSTP331, MSTP329, MSTP325, MSTP323, MSTP314, MSTP313, MSTP312, MSTP311, MSTP303, MSTP302, MSTP301, MSTP300, MSTP411, MSTP410, MSTP403, @@ -497,6 +497,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */ [MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */ [MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */ + [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */ [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */ @@ -508,7 +509,6 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ [MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */ [MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */ - [MSTP318] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* SY-DMAC */ [MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */ [MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */ [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */ @@ -552,6 +552,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */ CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */ + CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ @@ -563,7 +564,6 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */ - CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP318]), /* SY-DMAC */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */ diff --git a/arch/arm/mach-shmobile/intc-r8a7779.c b/arch/arm/mach-shmobile/intc-r8a7779.c index 550b23df4fd..f04fad4ec4f 100644 --- a/arch/arm/mach-shmobile/intc-r8a7779.c +++ b/arch/arm/mach-shmobile/intc-r8a7779.c @@ -35,6 +35,9 @@ #define INT2SMSKCR3 0xfe7822ac #define INT2SMSKCR4 0xfe7822b0 +#define INT2NTSR0 0xfe700060 +#define INT2NTSR1 0xfe700064 + static int r8a7779_set_wake(struct irq_data *data, unsigned int on) { return 0; /* always allow wakeup */ @@ -49,6 +52,10 @@ void __init r8a7779_init_irq(void) gic_init(0, 29, gic_dist_base, gic_cpu_base); gic_arch_extn.irq_set_wake = r8a7779_set_wake; + /* route all interrupts to ARM */ + __raw_writel(0xffffffff, INT2NTSR0); + __raw_writel(0x3fffffff, INT2NTSR1); + /* unmask all known interrupts in INTCS2 */ __raw_writel(0xfffffff0, INT2SMSKCR0); __raw_writel(0xfff7ffff, INT2SMSKCR1); diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index bacdd667e3b..e859fcdb3d5 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -25,7 +25,12 @@ #define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \ of_machine_is_compatible("renesas,sh73a0")) #define is_r8a7779() machine_is_marzen() + +#ifdef CONFIG_ARCH_EMEV2 #define is_emev2() of_machine_is_compatible("renesas,emev2") +#else +#define is_emev2() (0) +#endif static unsigned int __init shmobile_smp_get_core_count(void) { diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 6a4bd582c02..fafce9ce821 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -484,7 +484,7 @@ static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = { }, }; -#define SH7372_CHCLR 0x220 +#define SH7372_CHCLR (0x220 - 0x20) static const struct sh_dmae_channel sh7372_dmae_channels[] = { { diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index 4d6a2ee99c3..5beb7ebe294 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -33,7 +33,7 @@ static bool is_enabled; -static void tegra_cpu_reset_handler_enable(void) +static void __init tegra_cpu_reset_handler_enable(void) { void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE); void __iomem *evp_cpu_reset = diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index d766e4256b7..4044abcf6f9 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1067,7 +1067,7 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, gfp_t return NULL; while (count) { - int j, order = __ffs(count); + int j, order = __fls(count); pages[i] = alloc_pages(gfp | __GFP_NOWARN, order); while (!pages[i] && order) diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h index 7ded6f1f74b..3c080a32dbf 100644 --- a/arch/arm/plat-mxc/include/mach/mx2_cam.h +++ b/arch/arm/plat-mxc/include/mach/mx2_cam.h @@ -23,6 +23,7 @@ #ifndef __MACH_MX2_CAM_H_ #define __MACH_MX2_CAM_H_ +#define MX2_CAMERA_SWAP16 (1 << 0) #define MX2_CAMERA_EXT_VSYNC (1 << 1) #define MX2_CAMERA_CCIR (1 << 2) #define MX2_CAMERA_CCIR_INTERLACE (1 << 3) @@ -30,6 +31,7 @@ #define MX2_CAMERA_GATED_CLOCK (1 << 5) #define MX2_CAMERA_INV_DATA (1 << 6) #define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7) +#define MX2_CAMERA_PACK_DIR_MSB (1 << 8) /** * struct mx2_camera_platform_data - optional platform data for mx2_camera diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 62ec5c45279..706b7e29397 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -461,6 +461,7 @@ static int clk_dbg_show_summary(struct seq_file *s, void *unused) struct clk *c; struct clk *pa; + mutex_lock(&clocks_mutex); seq_printf(s, "%-30s %-30s %-10s %s\n", "clock-name", "parent-name", "rate", "use-count"); @@ -469,6 +470,7 @@ static int clk_dbg_show_summary(struct seq_file *s, void *unused) seq_printf(s, "%-30s %-30s %-10lu %d\n", c->name, pa ? pa->name : "none", c->rate, c->usecount); } + mutex_unlock(&clocks_mutex); return 0; } diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 61fd837624a..c1793786aea 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -582,7 +582,7 @@ void __init orion_spi_1_init(unsigned long mapbase) * Watchdog ****************************************************************************/ static struct resource orion_wdt_resource = - DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28); + DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x28); static struct platform_device orion_wdt_device = { .name = "orion_wdt", diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h index 7d048759b77..c0c70a895ca 100644 --- a/arch/arm/plat-samsung/include/plat/map-s3c.h +++ b/arch/arm/plat-samsung/include/plat/map-s3c.h @@ -22,7 +22,7 @@ #define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG #define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000) -#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000) +#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00100000) #define S3C2410_PA_UART (0x50000000) #define S3C24XX_PA_UART S3C2410_PA_UART diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h index f19aff19205..bc4db9b04e3 100644 --- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h +++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h @@ -25,7 +25,7 @@ static inline void arch_wdt_reset(void) __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ - if (s3c2410_wdtclk) + if (!IS_ERR(s3c2410_wdtclk)) clk_enable(s3c2410_wdtclk); /* put initial values into count and data */ diff --git a/arch/m68k/platform/coldfire/clk.c b/arch/m68k/platform/coldfire/clk.c index 9f1260c5e2a..44da406897e 100644 --- a/arch/m68k/platform/coldfire/clk.c +++ b/arch/m68k/platform/coldfire/clk.c @@ -42,4 +42,11 @@ unsigned long clk_get_rate(struct clk *clk) return MCF_CLK; } EXPORT_SYMBOL(clk_get_rate); + +struct clk *devm_clk_get(struct device *dev, const char *id) +{ + return NULL; +} +EXPORT_SYMBOL(devm_clk_get); + /***************************************************************************/ diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index 32b394f3b85..6eb75b80488 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -103,6 +103,11 @@ static inline void hard_irq_disable(void) /* include/linux/interrupt.h needs hard_irq_disable to be a macro */ #define hard_irq_disable hard_irq_disable +static inline bool lazy_irq_pending(void) +{ + return !!(get_paca()->irq_happened & ~PACA_IRQ_HARD_DIS); +} + /* * This is called by asynchronous interrupts to conditionally * re-enable hard interrupts when soft-disabled after having diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index ed1718feb9d..5971c85df13 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -558,27 +558,54 @@ _GLOBAL(ret_from_except_lite) mtmsrd r10,1 /* Update machine state */ #endif /* CONFIG_PPC_BOOK3E */ -#ifdef CONFIG_PREEMPT clrrdi r9,r1,THREAD_SHIFT /* current_thread_info() */ - li r0,_TIF_NEED_RESCHED /* bits to check */ ld r3,_MSR(r1) ld r4,TI_FLAGS(r9) - /* Move MSR_PR bit in r3 to _TIF_SIGPENDING position in r0 */ - rlwimi r0,r3,32+TIF_SIGPENDING-MSR_PR_LG,_TIF_SIGPENDING - and. r0,r4,r0 /* check NEED_RESCHED and maybe SIGPENDING */ - bne do_work - -#else /* !CONFIG_PREEMPT */ - ld r3,_MSR(r1) /* Returning to user mode? */ andi. r3,r3,MSR_PR - beq restore /* if not, just restore regs and return */ + beq resume_kernel /* Check current_thread_info()->flags */ + andi. r0,r4,_TIF_USER_WORK_MASK + beq restore + + andi. r0,r4,_TIF_NEED_RESCHED + beq 1f + bl .restore_interrupts + bl .schedule + b .ret_from_except_lite + +1: bl .save_nvgprs + bl .restore_interrupts + addi r3,r1,STACK_FRAME_OVERHEAD + bl .do_notify_resume + b .ret_from_except + +resume_kernel: +#ifdef CONFIG_PREEMPT + /* Check if we need to preempt */ + andi. r0,r4,_TIF_NEED_RESCHED + beq+ restore + /* Check that preempt_count() == 0 and interrupts are enabled */ + lwz r8,TI_PREEMPT(r9) + cmpwi cr1,r8,0 + ld r0,SOFTE(r1) + cmpdi r0,0 + crandc eq,cr1*4+eq,eq + bne restore + + /* + * Here we are preempting the current task. We want to make + * sure we are soft-disabled first + */ + SOFT_DISABLE_INTS(r3,r4) +1: bl .preempt_schedule_irq + + /* Re-test flags and eventually loop */ clrrdi r9,r1,THREAD_SHIFT ld r4,TI_FLAGS(r9) - andi. r0,r4,_TIF_USER_WORK_MASK - bne do_work -#endif /* !CONFIG_PREEMPT */ + andi. r0,r4,_TIF_NEED_RESCHED + bne 1b +#endif /* CONFIG_PREEMPT */ .globl fast_exc_return_irq fast_exc_return_irq: @@ -759,50 +786,6 @@ restore_check_irq_replay: #endif /* CONFIG_PPC_BOOK3E */ 1: b .ret_from_except /* What else to do here ? */ - - -3: -do_work: -#ifdef CONFIG_PREEMPT - andi. r0,r3,MSR_PR /* Returning to user mode? */ - bne user_work - /* Check that preempt_count() == 0 and interrupts are enabled */ - lwz r8,TI_PREEMPT(r9) - cmpwi cr1,r8,0 - ld r0,SOFTE(r1) - cmpdi r0,0 - crandc eq,cr1*4+eq,eq - bne restore - - /* - * Here we are preempting the current task. We want to make - * sure we are soft-disabled first - */ - SOFT_DISABLE_INTS(r3,r4) -1: bl .preempt_schedule_irq - - /* Re-test flags and eventually loop */ - clrrdi r9,r1,THREAD_SHIFT - ld r4,TI_FLAGS(r9) - andi. r0,r4,_TIF_NEED_RESCHED - bne 1b - b restore - -user_work: -#endif /* CONFIG_PREEMPT */ - - andi. r0,r4,_TIF_NEED_RESCHED - beq 1f - bl .restore_interrupts - bl .schedule - b .ret_from_except_lite - -1: bl .save_nvgprs - bl .restore_interrupts - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_notify_resume - b .ret_from_except - unrecov_restore: addi r3,r1,STACK_FRAME_OVERHEAD bl .unrecoverable_exception diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 7835a5e1ea5..1b415027ec0 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -277,7 +277,7 @@ EXPORT_SYMBOL(arch_local_irq_restore); * NOTE: This is called with interrupts hard disabled but not marked * as such in paca->irq_happened, so we need to resync this. */ -void restore_interrupts(void) +void notrace restore_interrupts(void) { if (irqs_disabled()) { local_paca->irq_happened |= PACA_IRQ_HARD_DIS; diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 1b488e5305c..0794a3017b1 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -1312,7 +1312,7 @@ static struct opal_secondary_data { extern char opal_secondary_entry; -static void prom_query_opal(void) +static void __init prom_query_opal(void) { long rc; @@ -1436,7 +1436,7 @@ static void __init prom_opal_hold_cpus(void) prom_debug("prom_opal_hold_cpus: end...\n"); } -static void prom_opal_takeover(void) +static void __init prom_opal_takeover(void) { struct opal_secondary_data *data = &RELOC(opal_secondary_data); struct opal_takeover_args *args = &data->args; diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index c6af1d62383..3abe1b86e58 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -268,24 +268,45 @@ static unsigned long do_h_register_vpa(struct kvm_vcpu *vcpu, return err; } -static void kvmppc_update_vpa(struct kvm *kvm, struct kvmppc_vpa *vpap) +static void kvmppc_update_vpa(struct kvm_vcpu *vcpu, struct kvmppc_vpa *vpap) { + struct kvm *kvm = vcpu->kvm; void *va; unsigned long nb; + unsigned long gpa; - vpap->update_pending = 0; - va = NULL; - if (vpap->next_gpa) { - va = kvmppc_pin_guest_page(kvm, vpap->next_gpa, &nb); - if (nb < vpap->len) { - /* - * If it's now too short, it must be that userspace - * has changed the mappings underlying guest memory, - * so unregister the region. - */ + /* + * We need to pin the page pointed to by vpap->next_gpa, + * but we can't call kvmppc_pin_guest_page under the lock + * as it does get_user_pages() and down_read(). So we + * have to drop the lock, pin the page, then get the lock + * again and check that a new area didn't get registered + * in the meantime. + */ + for (;;) { + gpa = vpap->next_gpa; + spin_unlock(&vcpu->arch.vpa_update_lock); + va = NULL; + nb = 0; + if (gpa) + va = kvmppc_pin_guest_page(kvm, vpap->next_gpa, &nb); + spin_lock(&vcpu->arch.vpa_update_lock); + if (gpa == vpap->next_gpa) + break; + /* sigh... unpin that one and try again */ + if (va) kvmppc_unpin_guest_page(kvm, va); - va = NULL; - } + } + + vpap->update_pending = 0; + if (va && nb < vpap->len) { + /* + * If it's now too short, it must be that userspace + * has changed the mappings underlying guest memory, + * so unregister the region. + */ + kvmppc_unpin_guest_page(kvm, va); + va = NULL; } if (vpap->pinned_addr) kvmppc_unpin_guest_page(kvm, vpap->pinned_addr); @@ -296,20 +317,18 @@ static void kvmppc_update_vpa(struct kvm *kvm, struct kvmppc_vpa *vpap) static void kvmppc_update_vpas(struct kvm_vcpu *vcpu) { - struct kvm *kvm = vcpu->kvm; - spin_lock(&vcpu->arch.vpa_update_lock); if (vcpu->arch.vpa.update_pending) { - kvmppc_update_vpa(kvm, &vcpu->arch.vpa); + kvmppc_update_vpa(vcpu, &vcpu->arch.vpa); init_vpa(vcpu, vcpu->arch.vpa.pinned_addr); } if (vcpu->arch.dtl.update_pending) { - kvmppc_update_vpa(kvm, &vcpu->arch.dtl); + kvmppc_update_vpa(vcpu, &vcpu->arch.dtl); vcpu->arch.dtl_ptr = vcpu->arch.dtl.pinned_addr; vcpu->arch.dtl_index = 0; } if (vcpu->arch.slb_shadow.update_pending) - kvmppc_update_vpa(kvm, &vcpu->arch.slb_shadow); + kvmppc_update_vpa(vcpu, &vcpu->arch.slb_shadow); spin_unlock(&vcpu->arch.vpa_update_lock); } @@ -800,12 +819,39 @@ static int kvmppc_run_core(struct kvmppc_vcore *vc) struct kvm_vcpu *vcpu, *vcpu0, *vnext; long ret; u64 now; - int ptid, i; + int ptid, i, need_vpa_update; /* don't start if any threads have a signal pending */ - list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) + need_vpa_update = 0; + list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) { if (signal_pending(vcpu->arch.run_task)) return 0; + need_vpa_update |= vcpu->arch.vpa.update_pending | + vcpu->arch.slb_shadow.update_pending | + vcpu->arch.dtl.update_pending; + } + + /* + * Initialize *vc, in particular vc->vcore_state, so we can + * drop the vcore lock if necessary. + */ + vc->n_woken = 0; + vc->nap_count = 0; + vc->entry_exit_count = 0; + vc->vcore_state = VCORE_RUNNING; + vc->in_guest = 0; + vc->napping_threads = 0; + + /* + * Updating any of the vpas requires calling kvmppc_pin_guest_page, + * which can't be called with any spinlocks held. + */ + if (need_vpa_update) { + spin_unlock(&vc->lock); + list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) + kvmppc_update_vpas(vcpu); + spin_lock(&vc->lock); + } /* * Make sure we are running on thread 0, and that @@ -838,20 +884,10 @@ static int kvmppc_run_core(struct kvmppc_vcore *vc) if (vcpu->arch.ceded) vcpu->arch.ptid = ptid++; - vc->n_woken = 0; - vc->nap_count = 0; - vc->entry_exit_count = 0; - vc->vcore_state = VCORE_RUNNING; vc->stolen_tb += mftb() - vc->preempt_tb; - vc->in_guest = 0; vc->pcpu = smp_processor_id(); - vc->napping_threads = 0; list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) { kvmppc_start_thread(vcpu); - if (vcpu->arch.vpa.update_pending || - vcpu->arch.slb_shadow.update_pending || - vcpu->arch.dtl.update_pending) - kvmppc_update_vpas(vcpu); kvmppc_create_dtl_entry(vcpu, vc); } /* Grab any remaining hw threads so they can't go into the kernel */ diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index b6edbb3b4a5..6e8f677f564 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -635,7 +635,7 @@ static inline int __init read_usm_ranges(const u32 **usm) */ static void __init parse_drconf_memory(struct device_node *memory) { - const u32 *dm, *usm; + const u32 *uninitialized_var(dm), *usm; unsigned int n, rc, ranges, is_kexec_kdump = 0; unsigned long lmb_size, base, size, sz; int nid; diff --git a/arch/powerpc/net/bpf_jit_64.S b/arch/powerpc/net/bpf_jit_64.S index 55ba3855a97..7d3a3b5619a 100644 --- a/arch/powerpc/net/bpf_jit_64.S +++ b/arch/powerpc/net/bpf_jit_64.S @@ -105,6 +105,7 @@ sk_load_byte_msh_positive_offset: mr r4, r_addr; \ li r6, SIZE; \ bl skb_copy_bits; \ + nop; \ /* R3 = 0 on success */ \ addi r1, r1, BPF_PPC_SLOWPATH_FRAME; \ ld r0, 16(r1); \ @@ -156,6 +157,7 @@ bpf_slow_path_byte_msh: mr r4, r_addr; \ li r5, SIZE; \ bl bpf_internal_load_pointer_neg_helper; \ + nop; \ /* R3 != 0 on success */ \ addi r1, r1, BPF_PPC_SLOWPATH_FRAME; \ ld r0, 16(r1); \ diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 0915b1ad66c..2d311c0caf8 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -106,7 +106,7 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index, tcep++; } - if (tbl->it_type == TCE_PCI_SWINV_CREATE) + if (tbl->it_type & TCE_PCI_SWINV_CREATE) tce_invalidate_pSeries_sw(tbl, tces, tcep - 1); return 0; } @@ -121,7 +121,7 @@ static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages) while (npages--) *(tcep++) = 0; - if (tbl->it_type == TCE_PCI_SWINV_FREE) + if (tbl->it_type & TCE_PCI_SWINV_FREE) tce_invalidate_pSeries_sw(tbl, tces, tcep - 1); } diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c index 41a34bc4a9a..e61483e8e96 100644 --- a/arch/powerpc/platforms/pseries/processor_idle.c +++ b/arch/powerpc/platforms/pseries/processor_idle.c @@ -106,7 +106,7 @@ static void check_and_cede_processor(void) * we first hard disable then check. */ hard_irq_disable(); - if (get_paca()->irq_happened == 0) + if (!lazy_irq_pending()) cede_processor(); } diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index 158c9176e42..43a179ce9af 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -201,8 +201,8 @@ static struct resource kfr2r09_usb0_gadget_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = evtirq(0xa20), - .end = evtirq(0xa20), + .start = evt2irq(0xa20), + .end = evt2irq(0xa20), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c index c045142f733..9e702f2f804 100644 --- a/arch/sh/drivers/pci/pcie-sh7786.c +++ b/arch/sh/drivers/pci/pcie-sh7786.c @@ -239,7 +239,7 @@ static int __init pcie_clk_init(struct sh7786_pcie_port *port) clk->enable_reg = (void __iomem *)(chan->reg_base + SH4A_PCIEPHYCTLR); clk->enable_bit = BITS_CKE; - ret = sh_clk_mstp32_register(clk, 1); + ret = sh_clk_mstp_register(clk, 1); if (unlikely(ret < 0)) goto err_phy; diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c index ea01a72f1b9..53638e231cd 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c @@ -283,7 +283,7 @@ int __init arch_clk_init(void) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c index 7ac07b4f75d..22e485d1990 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c @@ -276,7 +276,7 @@ int __init arch_clk_init(void) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c index 8e1f97010c0..c4cb740e4d1 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c @@ -261,7 +261,7 @@ int __init arch_clk_init(void) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR); + ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c index 35f75cf0c7e..37c41c7747a 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c @@ -311,7 +311,7 @@ int __init arch_clk_init(void) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR); + ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c index 2a87901673f..c87e78f7323 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c @@ -375,7 +375,7 @@ int __init arch_clk_init(void) ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR); + ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7734.c b/arch/sh/kernel/cpu/sh4a/clock-sh7734.c index 1697642c1f7..deb683abacf 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7734.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7734.c @@ -260,7 +260,7 @@ int __init arch_clk_init(void) &div4_table); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c index 04ab5aeaf92..e84a43229b9 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c @@ -148,7 +148,7 @@ int __init arch_clk_init(void) ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks), &div4_table); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c index ab1c58f2d10..1c83788db76 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c @@ -175,7 +175,7 @@ int __init arch_clk_init(void) ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks), &div4_table); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c index 491709483e1..8bba6f15902 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c @@ -194,7 +194,7 @@ int __init arch_clk_init(void) ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks), &div4_table); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c index 0f11b392bf4..a9422dab0ce 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-shx3.c +++ b/arch/sh/kernel/cpu/sh4a/clock-shx3.c @@ -149,7 +149,7 @@ int __init arch_clk_init(void) ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks), &div4_table); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } diff --git a/arch/sparc/kernel/vio.c b/arch/sparc/kernel/vio.c index 5cffdc55f07..3e244f31e56 100644 --- a/arch/sparc/kernel/vio.c +++ b/arch/sparc/kernel/vio.c @@ -443,7 +443,7 @@ static int __init vio_init(void) root_vdev = vio_create_one(hp, root, NULL); err = -ENODEV; if (!root_vdev) { - printk(KERN_ERR "VIO: Coult not create root device.\n"); + printk(KERN_ERR "VIO: Could not create root device.\n"); goto out_release; } diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c index daeca56211e..673ac9b63d6 100644 --- a/arch/x86/ia32/ia32_signal.c +++ b/arch/x86/ia32/ia32_signal.c @@ -38,7 +38,7 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from) { int err = 0; - bool ia32 = is_ia32_task(); + bool ia32 = test_thread_flag(TIF_IA32); if (!access_ok(VERIFY_WRITE, to, sizeof(compat_siginfo_t))) return -EFAULT; diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 340ee49961a..f91e80f4f18 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -176,7 +176,7 @@ #define X86_FEATURE_XSAVEOPT (7*32+ 4) /* Optimized Xsave */ #define X86_FEATURE_PLN (7*32+ 5) /* Intel Power Limit Notification */ #define X86_FEATURE_PTS (7*32+ 6) /* Intel Package Thermal Status */ -#define X86_FEATURE_DTS (7*32+ 7) /* Digital Thermal Sensor */ +#define X86_FEATURE_DTHERM (7*32+ 7) /* Digital Thermal Sensor */ #define X86_FEATURE_HW_PSTATE (7*32+ 8) /* AMD HW-PState */ /* Virtualization flags: Linux defined, word 8 */ diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 8afb6931981..b2297e58c6e 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -422,12 +422,14 @@ acpi_parse_int_src_ovr(struct acpi_subtable_header * header, return 0; } - if (intsrc->source_irq == 0 && intsrc->global_irq == 2) { + if (intsrc->source_irq == 0) { if (acpi_skip_timer_override) { - printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n"); + printk(PREFIX "BIOS IRQ0 override ignored.\n"); return 0; } - if (acpi_fix_pin2_polarity && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) { + + if ((intsrc->global_irq == 2) && acpi_fix_pin2_polarity + && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) { intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK; printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n"); } @@ -1334,17 +1336,12 @@ static int __init dmi_disable_acpi(const struct dmi_system_id *d) } /* - * Force ignoring BIOS IRQ0 pin2 override + * Force ignoring BIOS IRQ0 override */ static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d) { - /* - * The ati_ixp4x0_rev() early PCI quirk should have set - * the acpi_skip_timer_override flag already: - */ if (!acpi_skip_timer_override) { - WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n"); - pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n", + pr_notice("%s detected: Ignoring BIOS IRQ0 override\n", d->ident); acpi_skip_timer_override = 1; } @@ -1438,7 +1435,7 @@ static struct dmi_system_id __initdata acpi_dmi_table_late[] = { * is enabled. This input is incorrectly designated the * ISA IRQ 0 via an interrupt source override even though * it is wired to the output of the master 8259A and INTIN0 - * is not connected at all. Force ignoring BIOS IRQ0 pin2 + * is not connected at all. Force ignoring BIOS IRQ0 * override in that cases. */ { @@ -1473,6 +1470,14 @@ static struct dmi_system_id __initdata acpi_dmi_table_late[] = { DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"), }, }, + { + .callback = dmi_ignore_irq0_timer_override, + .ident = "FUJITSU SIEMENS", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"), + }, + }, {} }; diff --git a/arch/x86/kernel/cpu/mkcapflags.pl b/arch/x86/kernel/cpu/mkcapflags.pl index dfea390e160..c7b3fe2d72e 100644 --- a/arch/x86/kernel/cpu/mkcapflags.pl +++ b/arch/x86/kernel/cpu/mkcapflags.pl @@ -1,4 +1,4 @@ -#!/usr/bin/perl +#!/usr/bin/perl -w # # Generate the x86_cap_flags[] array from include/asm-x86/cpufeature.h # @@ -11,22 +11,35 @@ open(OUT, "> $out\0") or die "$0: cannot create: $out: $!\n"; print OUT "#include <asm/cpufeature.h>\n\n"; print OUT "const char * const x86_cap_flags[NCAPINTS*32] = {\n"; +%features = (); +$err = 0; + while (defined($line = <IN>)) { if ($line =~ /^\s*\#\s*define\s+(X86_FEATURE_(\S+))\s+(.*)$/) { $macro = $1; - $feature = $2; + $feature = "\L$2"; $tail = $3; if ($tail =~ /\/\*\s*\"([^"]*)\".*\*\//) { - $feature = $1; + $feature = "\L$1"; } - if ($feature ne '') { - printf OUT "\t%-32s = \"%s\",\n", - "[$macro]", "\L$feature"; + next if ($feature eq ''); + + if ($features{$feature}++) { + print STDERR "$in: duplicate feature name: $feature\n"; + $err++; } + printf OUT "\t%-32s = \"%s\",\n", "[$macro]", $feature; } } print OUT "};\n"; close(IN); close(OUT); + +if ($err) { + unlink($out); + exit(1); +} + +exit(0); diff --git a/arch/x86/kernel/cpu/scattered.c b/arch/x86/kernel/cpu/scattered.c index addf9e82a7f..ee8e9abc859 100644 --- a/arch/x86/kernel/cpu/scattered.c +++ b/arch/x86/kernel/cpu/scattered.c @@ -31,7 +31,7 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c) const struct cpuid_bit *cb; static const struct cpuid_bit __cpuinitconst cpuid_bits[] = { - { X86_FEATURE_DTS, CR_EAX, 0, 0x00000006, 0 }, + { X86_FEATURE_DTHERM, CR_EAX, 0, 0x00000006, 0 }, { X86_FEATURE_IDA, CR_EAX, 1, 0x00000006, 0 }, { X86_FEATURE_ARAT, CR_EAX, 2, 0x00000006, 0 }, { X86_FEATURE_PLN, CR_EAX, 4, 0x00000006, 0 }, diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index 8bfb6146f75..3f61904365c 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -444,12 +444,12 @@ void kgdb_roundup_cpus(unsigned long flags) /** * kgdb_arch_handle_exception - Handle architecture specific GDB packets. - * @vector: The error vector of the exception that happened. + * @e_vector: The error vector of the exception that happened. * @signo: The signal number of the exception that happened. * @err_code: The error code of the exception that happened. - * @remcom_in_buffer: The buffer of the packet we have read. - * @remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into. - * @regs: The &struct pt_regs of the current process. + * @remcomInBuffer: The buffer of the packet we have read. + * @remcomOutBuffer: The buffer of %BUFMAX bytes to write a packet into. + * @linux_regs: The &struct pt_regs of the current process. * * This function MUST handle the 'c' and 's' command packets, * as well packets to set / remove a hardware breakpoint, if used. diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 25b48edb847..5de92f1abd7 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -451,6 +451,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"), }, }, + { /* Handle problems with rebooting on the Precision M6600. */ + .callback = set_pci_reboot, + .ident = "Dell OptiPlex 990", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Precision M6600"), + }, + }, { } }; diff --git a/arch/x86/lib/csum-wrappers_64.c b/arch/x86/lib/csum-wrappers_64.c index 459b58a8a15..25b7ae8d058 100644 --- a/arch/x86/lib/csum-wrappers_64.c +++ b/arch/x86/lib/csum-wrappers_64.c @@ -115,7 +115,7 @@ EXPORT_SYMBOL(csum_partial_copy_to_user); * @src: source address * @dst: destination address * @len: number of bytes to be copied. - * @isum: initial sum that is added into the result (32bit unfolded) + * @sum: initial sum that is added into the result (32bit unfolded) * * Returns an 32bit unfolded checksum of the buffer. */ |