diff options
Diffstat (limited to 'arch')
169 files changed, 9385 insertions, 2199 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 184a6bd5482..83127311a52 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -633,6 +633,14 @@ config ARCH_S3C64XX help Samsung S3C64XX series based systems +config ARCH_S5P6440 + bool "Samsung S5P6440" + select CPU_V6 + select GENERIC_GPIO + select HAVE_CLK + help + Samsung S5P6440 CPU based systems + config ARCH_S5PC1XX bool "Samsung S5PC1XX" select GENERIC_GPIO @@ -806,6 +814,7 @@ source "arch/arm/plat-samsung/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" source "arch/arm/plat-s3c64xx/Kconfig" source "arch/arm/plat-s3c/Kconfig" +source "arch/arm/plat-s5p/Kconfig" source "arch/arm/plat-s5pc1xx/Kconfig" if ARCH_S3C2410 @@ -822,6 +831,8 @@ source "arch/arm/mach-s3c6400/Kconfig" source "arch/arm/mach-s3c6410/Kconfig" endif +source "arch/arm/mach-s5p6440/Kconfig" + source "arch/arm/plat-stmp3xxx/Kconfig" if ARCH_S5PC1XX @@ -1075,7 +1086,7 @@ source kernel/Kconfig.preempt config HZ int default 128 if ARCH_L7200 - default 200 if ARCH_EBSA110 || ARCH_S3C2410 + default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default AT91_TIMER_HZ if ARCH_AT91 default 100 diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 356d702c080..215a5cdd3d7 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -162,6 +162,7 @@ machine-$(CONFIG_ARCH_RPC) := rpc machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410 +machine-$(CONFIG_ARCH_S5P6440) := s5p6440 machine-$(CONFIG_ARCH_S5PC1XX) := s5pc100 machine-$(CONFIG_ARCH_SA1100) := sa1100 machine-$(CONFIG_ARCH_SHARK) := shark @@ -185,6 +186,7 @@ plat-$(CONFIG_PLAT_PXA) := pxa plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c samsung plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c samsung plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c samsung +plat-$(CONFIG_PLAT_S5P) := s5p samsung s3c ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index d2a90eb844a..ff44bd1615c 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -184,7 +184,7 @@ CONFIG_S3C24XX_PWM=y CONFIG_S3C24XX_GPIO_EXTRA=0 CONFIG_S3C2410_DMA=y # CONFIG_S3C2410_DMA_DEBUG is not set -CONFIG_S3C24XX_ADC=y +CONFIG_S3C_ADC=y CONFIG_PLAT_S3C=y CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y CONFIG_CPU_LLSERIAL_S3C2440=y @@ -199,8 +199,8 @@ CONFIG_S3C_BOOT_UART_FORCE_FIFO=y # # Power management # -# CONFIG_S3C2410_PM_DEBUG is not set -# CONFIG_S3C2410_PM_CHECK is not set +# CONFIG_SAMSUNG_PM_DEBUG is not set +# CONFIG_SAMSUNG_PM_CHECK is not set CONFIG_S3C_LOWLEVEL_UART_PORT=0 CONFIG_S3C_GPIO_SPACE=0 diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig new file mode 100644 index 00000000000..acb1a8f30e3 --- /dev/null +++ b/arch/arm/configs/raumfeld_defconfig @@ -0,0 +1,1898 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc5 +# Sun Nov 1 21:57:32 2009 +# +CONFIG_ARM=y +CONFIG_HAVE_PWM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +CONFIG_SLOW_WORK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# + +# +# Supported PXA3xx Processor Variants +# +CONFIG_CPU_PXA300=y +# CONFIG_CPU_PXA310 is not set +CONFIG_CPU_PXA320=y +# CONFIG_CPU_PXA930 is not set +# CONFIG_CPU_PXA935 is not set +# CONFIG_CPU_PXA950 is not set + +# +# Intel/Marvell Dev Platforms (sorted by hardware release time) +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_TAVOREVB is not set +# CONFIG_MACH_SAAR is not set + +# +# Third Party Dev Platforms (sorted by vendor name) +# +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_ARCH_VIPER is not set +# CONFIG_MACH_BALLOON3 is not set +# CONFIG_MACH_CSB726 is not set +# CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_EXEDA is not set +# CONFIG_MACH_CM_X300 is not set +# CONFIG_ARCH_GUMSTIX is not set +# CONFIG_MACH_INTELMOTE2 is not set +# CONFIG_MACH_STARGATE2 is not set +# CONFIG_MACH_XCEP is not set +# CONFIG_TRIZEPS_PXA is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_PCM027 is not set +# CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_COLIBRI300 is not set +# CONFIG_MACH_COLIBRI320 is not set + +# +# End-user Products (sorted by vendor name) +# +# CONFIG_MACH_H4700 is not set +# CONFIG_MACH_H5000 is not set +# CONFIG_MACH_HIMALAYA is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_MIOA701 is not set +# CONFIG_PXA_EZX is not set +# CONFIG_MACH_MP900C is not set +# CONFIG_ARCH_PXA_PALM is not set +CONFIG_MACH_RAUMFELD_RC=y +CONFIG_MACH_RAUMFELD_CONNECTOR=y +CONFIG_MACH_RAUMFELD_PROTO=y +CONFIG_MACH_RAUMFELD_SPEAKER=y +# CONFIG_PXA_SHARPSL is not set +# CONFIG_ARCH_PXA_ESERIES is not set +CONFIG_PXA3xx=y +CONFIG_PXA_SSP=y +CONFIG_PLAT_PXA=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSC3=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_IO_36=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_OUTER_CACHE=y +CONFIG_CACHE_XSC3L2=y +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_IWMMXT=y +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="console=ttyS0,115200 rw" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_APM_EMULATION=y +# CONFIG_PM_RUNTIME is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +CONFIG_CFG80211_REG_DEBUG=y +CONFIG_CFG80211_DEFAULT_PS=y +CONFIG_CFG80211_DEFAULT_PS_VALUE=1 +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=y +# CONFIG_LIB80211_DEBUG is not set +CONFIG_MAC80211=y +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +CONFIG_NFTL=y +CONFIG_NFTL_RW=y +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +CONFIG_MTD_BLOCK2MTD=y + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_H1900 is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_SHARPSL is not set +CONFIG_MTD_NAND_PXA3xx=y +# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_ISL29003=y +CONFIG_TI_DAC7512=y +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +CONFIG_LIBERTAS=y +# CONFIG_LIBERTAS_USB is not set +CONFIG_LIBERTAS_SDIO=m +# CONFIG_LIBERTAS_SPI is not set +# CONFIG_LIBERTAS_DEBUG is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_AT76C50X_USB is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8187 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_ATH_COMMON is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set +# CONFIG_WL12XX is not set +# CONFIG_IWM is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +CONFIG_USB_USBNET=y +# CONFIG_USB_NET_AX8817X is not set +CONFIG_USB_NET_CDCETHER=y +# CONFIG_USB_NET_CDC_EEM is not set +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_SMSC95XX is not set +# CONFIG_USB_NET_GL620A is not set +# CONFIG_USB_NET_NET1080 is not set +# CONFIG_USB_NET_PLUSB is not set +CONFIG_USB_NET_MCS7830=y +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +# CONFIG_USB_NET_ZAURUS is not set +# CONFIG_USB_NET_INT51X1 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_POLLDEV=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_PXA27x is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +CONFIG_TOUCHSCREEN_EETI=m +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +# CONFIG_INPUT_UINPUT is not set +CONFIG_INPUT_GPIO_ROTARY_ENCODER=y + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +CONFIG_SPI_DEBUG=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_GPIO=y +# CONFIG_SPI_PXA2XX is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=y +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_DEBUG_GPIO=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +CONFIG_W1=m + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2490 is not set +# CONFIG_W1_MASTER_DS2482 is not set +# CONFIG_W1_MASTER_DS1WM is not set +CONFIG_W1_MASTER_GPIO=m + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +CONFIG_W1_SLAVE_DS2760=m +# CONFIG_W1_SLAVE_BQ27000 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +CONFIG_PDA_POWER=y +# CONFIG_APM_POWER is not set +CONFIG_BATTERY_DS2760=m +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_MAX17040 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +CONFIG_SENSORS_LIS3_SPI=y +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +CONFIG_REGULATOR=y +CONFIG_REGULATOR_DEBUG=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_MAX8660=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_OVERLAY is not set +# CONFIG_FB_PXA_SMARTPANEL is not set +# CONFIG_FB_PXA_PARAMETERS is not set +CONFIG_PXA3XX_GCU=y +# CONFIG_FB_MBX is not set +# CONFIG_FB_W100 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_PWM=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_LOGO_RAUMFELD_CLUT224=y +CONFIG_SOUND=y +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +# CONFIG_SND_DRIVERS is not set +CONFIG_SND_ARM=y +CONFIG_SND_PXA2XX_LIB=y +# CONFIG_SND_PXA2XX_AC97 is not set +CONFIG_SND_SPI=y +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y +CONFIG_SND_PXA2XX_SOC=y +CONFIG_SND_PXA_SOC_SSP=y +CONFIG_SND_SOC_RAUMFELD=y +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_AK4104=y +CONFIG_SND_SOC_CS4270=y +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=y +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y +CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_SMARTJOYPLUS=y +# CONFIG_SMARTJOYPLUS_FF is not set +CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y +# CONFIG_THRUSTMASTER_FF is not set +CONFIG_HID_ZEROPLUS=y +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +CONFIG_USB_STORAGE_FREECOM=y +CONFIG_USB_STORAGE_ISD200=y +CONFIG_USB_STORAGE_USBAT=y +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_PXA=m +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_PWM is not set +# CONFIG_LEDS_BD2802 is not set +CONFIG_LEDS_LT3593=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +# CONFIG_LEDS_TRIGGER_GPIO is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_SA1100 is not set +CONFIG_RTC_DRV_PXA=y +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +# CONFIG_AUXDISPLAY is not set +CONFIG_UIO=y +# CONFIG_UIO_PDRV is not set +# CONFIG_UIO_PDRV_GENIRQ is not set +# CONFIG_UIO_SMX is not set +# CONFIG_UIO_SERCOS3 is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT2_FS_XIP=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_FS_XIP=y +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +CONFIG_FSCACHE=y +CONFIG_FSCACHE_STATS=y +# CONFIG_FSCACHE_HISTOGRAM is not set +# CONFIG_FSCACHE_DEBUG is not set +CONFIG_CACHEFILES=y +# CONFIG_CACHEFILES_DEBUG is not set +# CONFIG_CACHEFILES_HISTOGRAM is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFS_FSCACHE=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=y +CONFIG_NLS_CODEPAGE_775=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y +CONFIG_NLS_CODEPAGE_855=y +CONFIG_NLS_CODEPAGE_857=y +CONFIG_NLS_CODEPAGE_860=y +CONFIG_NLS_CODEPAGE_861=y +CONFIG_NLS_CODEPAGE_862=y +CONFIG_NLS_CODEPAGE_863=y +CONFIG_NLS_CODEPAGE_864=y +CONFIG_NLS_CODEPAGE_865=y +CONFIG_NLS_CODEPAGE_866=y +CONFIG_NLS_CODEPAGE_869=y +CONFIG_NLS_CODEPAGE_936=y +CONFIG_NLS_CODEPAGE_950=y +CONFIG_NLS_CODEPAGE_932=y +CONFIG_NLS_CODEPAGE_949=y +CONFIG_NLS_CODEPAGE_874=y +CONFIG_NLS_ISO8859_8=y +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +CONFIG_NLS_ISO8859_3=y +CONFIG_NLS_ISO8859_4=y +CONFIG_NLS_ISO8859_5=y +CONFIG_NLS_ISO8859_6=y +CONFIG_NLS_ISO8859_7=y +CONFIG_NLS_ISO8859_9=y +CONFIG_NLS_ISO8859_13=y +CONFIG_NLS_ISO8859_14=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_KOI8_R=y +CONFIG_NLS_KOI8_U=y +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 2f10dae0279..8e94c3caeb8 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -187,7 +187,7 @@ CONFIG_S3C24XX_GPIO_EXTRA128=y CONFIG_PM_SIMTEC=y CONFIG_S3C2410_DMA=y # CONFIG_S3C2410_DMA_DEBUG is not set -CONFIG_S3C24XX_ADC=y +CONFIG_S3C_ADC=y CONFIG_MACH_SMDK=y CONFIG_PLAT_S3C=y CONFIG_CPU_LLSERIAL_S3C2410=y @@ -203,8 +203,8 @@ CONFIG_S3C_BOOT_UART_FORCE_FIFO=y # # Power management # -# CONFIG_S3C2410_PM_DEBUG is not set -# CONFIG_S3C2410_PM_CHECK is not set +# CONFIG_SAMSUNG_PM_DEBUG is not set +# CONFIG_SAMSUNG_PM_CHECK is not set CONFIG_S3C_LOWLEVEL_UART_PORT=0 CONFIG_S3C_GPIO_SPACE=0 CONFIG_S3C_DEV_HSMMC=y diff --git a/arch/arm/configs/s5p6440_defconfig b/arch/arm/configs/s5p6440_defconfig new file mode 100644 index 00000000000..279a15e5311 --- /dev/null +++ b/arch/arm/configs/s5p6440_defconfig @@ -0,0 +1,969 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.33-rc2 +# Sat Jan 9 16:33:55 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_NO_IOPORT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +# CONFIG_SYSVIPC is not set +# CONFIG_BSD_PROCESS_ACCT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +CONFIG_ARCH_S5P6440=y +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_U8500 is not set +CONFIG_PLAT_SAMSUNG=y +CONFIG_SAMSUNG_CLKSRC=y +CONFIG_SAMSUNG_IRQ_VIC_TIMER=y +CONFIG_SAMSUNG_IRQ_UART=y +CONFIG_SAMSUNG_GPIO_EXTRA=0 +CONFIG_PLAT_S3C=y + +# +# Boot options +# +CONFIG_S3C_BOOT_ERROR_RESET=y +CONFIG_S3C_BOOT_UART_FORCE_FIFO=y + +# +# Power management +# +CONFIG_S3C_LOWLEVEL_UART_PORT=1 +CONFIG_S3C_GPIO_SPACE=0 +CONFIG_S3C_GPIO_TRACK=y +CONFIG_PLAT_S5P=y +CONFIG_CPU_S5P6440_INIT=y +CONFIG_CPU_S5P6440_CLOCK=y +CONFIG_CPU_S5P6440=y +CONFIG_MACH_SMDK6440=y + +# +# Processor Type +# +CONFIG_CPU_V6=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_V6=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +# CONFIG_ARM_ERRATA_411920 is not set +CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=200 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=999999 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_CONSOLE is not set +CONFIG_SERIAL_8250_NR_UARTS=3 +CONFIG_SERIAL_8250_RUNTIME_UARTS=3 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_UARTS=4 +# CONFIG_SERIAL_SAMSUNG_DEBUG is not set +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_S5P6440=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_EARLY_PRINTK is not set +# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_OC_ETM is not set +CONFIG_DEBUG_S3C_UART=1 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/include/asm/entry-macro-vic2.S b/arch/arm/include/asm/entry-macro-vic2.S new file mode 100644 index 00000000000..3ceb85e4385 --- /dev/null +++ b/arch/arm/include/asm/entry-macro-vic2.S @@ -0,0 +1,57 @@ +/* arch/arm/include/asm/entry-macro-vic2.S + * + * Originally arch/arm/mach-s3c6400/include/mach/entry-macro.S + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * Low-level IRQ helper macros for a device with two VICs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +/* This should be included from <mach/entry-macro.S> with the necessary + * defines for virtual addresses and IRQ bases for the two vics. + * + * The code needs the following defined: + * IRQ_VIC0_BASE IRQ number of VIC0's first IRQ + * IRQ_VIC1_BASE IRQ number of VIC1's first IRQ + * VA_VIC0 Virtual address of VIC0 + * VA_VIC1 Virtual address of VIC1 + * + * Note, code assumes VIC0's virtual address is an ARM immediate constant + * away from VIC1. +*/ + +#include <asm/hardware/vic.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =VA_VIC0 + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + @ check the vic0 + mov \irqnr, #IRQ_VIC0_BASE + 31 + ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] + teq \irqstat, #0 + + @ otherwise try vic1 + addeq \tmp, \base, #(VA_VIC1 - VA_VIC0) + addeq \irqnr, \irqnr, #(IRQ_VIC1_BASE - IRQ_VIC0_BASE) + ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] + teqeq \irqstat, #0 + + clzne \irqstat, \irqstat + subne \irqnr, \irqnr, \irqstat + .endm diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index dee92182749..385c30ee3f2 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -417,6 +417,24 @@ config MACH_TREO680 Say Y here if you intend to run this kernel on Palm Treo 680 smartphone. +config MACH_RAUMFELD_RC + bool "Raumfeld Controller" + select PXA3xx + select CPU_PXA300 + select HAVE_PWM + +config MACH_RAUMFELD_CONNECTOR + bool "Raumfeld Connector" + select PXA3xx + select CPU_PXA300 + select PXA_SSP + +config MACH_RAUMFELD_SPEAKER + bool "Raumfeld Speaker" + select PXA3xx + select CPU_PXA300 + select PXA_SSP + config PXA_SHARPSL bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" select SHARP_SCOOP diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index f64afda7e6f..9d831939b3c 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -89,6 +89,9 @@ obj-$(CONFIG_MACH_E740) += e740.o obj-$(CONFIG_MACH_E750) += e750.o obj-$(CONFIG_MACH_E400) += e400.o obj-$(CONFIG_MACH_E800) += e800.o +obj-$(CONFIG_MACH_RAUMFELD_RC) += raumfeld.o +obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o +obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o # Support for blinky lights led-y := leds.o diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c new file mode 100644 index 00000000000..06717d7995c --- /dev/null +++ b/arch/arm/mach-pxa/raumfeld.c @@ -0,0 +1,1100 @@ +/* + * arch/arm/mach-pxa/raumfeld.c + * + * Support for the following Raumfeld devices: + * + * * Controller + * * Connector + * * Speaker S/M + * + * See http://www.raumfeld.com for details. + * + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sysdev.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/smsc911x.h> +#include <linux/input.h> +#include <linux/rotary_encoder.h> +#include <linux/gpio_keys.h> +#include <linux/input/eeti_ts.h> +#include <linux/leds.h> +#include <linux/w1-gpio.h> +#include <linux/sched.h> +#include <linux/pwm_backlight.h> +#include <linux/i2c.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> +#include <linux/lis3lv02d.h> +#include <linux/pda_power.h> +#include <linux/power_supply.h> +#include <linux/pda_power.h> +#include <linux/power_supply.h> +#include <linux/regulator/max8660.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/consumer.h> +#include <linux/delay.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/hardware.h> +#include <mach/pxa3xx-regs.h> +#include <mach/mfp-pxa3xx.h> +#include <mach/mfp-pxa300.h> +#include <mach/ohci.h> +#include <mach/pxafb.h> +#include <mach/mmc.h> +#include <plat/i2c.h> +#include <plat/pxa3xx_nand.h> + +#include "generic.h" +#include "devices.h" +#include "clock.h" + +/* common GPIO definitions */ + +/* inputs */ +#define GPIO_ON_OFF (14) +#define GPIO_VOLENC_A (19) +#define GPIO_VOLENC_B (20) +#define GPIO_CHARGE_DONE (23) +#define GPIO_CHARGE_IND (27) +#define GPIO_TOUCH_IRQ (32) +#define GPIO_ETH_IRQ (40) +#define GPIO_SPI_MISO (98) +#define GPIO_ACCEL_IRQ (104) +#define GPIO_RESCUE_BOOT (115) +#define GPIO_DOCK_DETECT (116) +#define GPIO_KEY1 (117) +#define GPIO_KEY2 (118) +#define GPIO_KEY3 (119) +#define GPIO_CHARGE_USB_OK (112) +#define GPIO_CHARGE_DC_OK (101) +#define GPIO_CHARGE_USB_SUSP (102) + +/* outputs */ +#define GPIO_SHUTDOWN_SUPPLY (16) +#define GPIO_SHUTDOWN_BATT (18) +#define GPIO_CHRG_PEN2 (31) +#define GPIO_TFT_VA_EN (33) +#define GPIO_SPDIF_CS (34) +#define GPIO_LED2 (35) +#define GPIO_LED1 (36) +#define GPIO_SPDIF_RESET (38) +#define GPIO_SPI_CLK (95) +#define GPIO_MCLK_DAC_CS (96) +#define GPIO_SPI_MOSI (97) +#define GPIO_W1_PULLUP_ENABLE (105) +#define GPIO_DISPLAY_ENABLE (106) +#define GPIO_MCLK_RESET (111) +#define GPIO_W2W_RESET (113) +#define GPIO_W2W_PDN (114) +#define GPIO_CODEC_RESET (120) +#define GPIO_AUDIO_VA_ENABLE (124) +#define GPIO_ACCEL_CS (125) +#define GPIO_ONE_WIRE (126) + +/* + * GPIO configurations + */ +static mfp_cfg_t raumfeld_controller_pin_config[] __initdata = { + /* UART1 */ + GPIO77_UART1_RXD, + GPIO78_UART1_TXD, + GPIO79_UART1_CTS, + GPIO81_UART1_DSR, + GPIO83_UART1_DTR, + GPIO84_UART1_RTS, + + /* UART3 */ + GPIO110_UART3_RXD, + + /* USB Host */ + GPIO0_2_USBH_PEN, + GPIO1_2_USBH_PWR, + + /* I2C */ + GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT, + GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT, + + /* SPI */ + GPIO34_GPIO, /* SPDIF_CS */ + GPIO96_GPIO, /* MCLK_CS */ + GPIO125_GPIO, /* ACCEL_CS */ + + /* MMC */ + GPIO3_MMC1_DAT0, + GPIO4_MMC1_DAT1, + GPIO5_MMC1_DAT2, + GPIO6_MMC1_DAT3, + GPIO7_MMC1_CLK, + GPIO8_MMC1_CMD, + + /* One-wire */ + GPIO126_GPIO | MFP_LPM_FLOAT, + GPIO105_GPIO | MFP_PULL_LOW | MFP_LPM_PULL_LOW, + + /* CHRG_USB_OK */ + GPIO101_GPIO | MFP_PULL_HIGH, + /* CHRG_USB_OK */ + GPIO112_GPIO | MFP_PULL_HIGH, + /* CHRG_USB_SUSP */ + GPIO102_GPIO, + /* DISPLAY_ENABLE */ + GPIO106_GPIO, + /* DOCK_DETECT */ + GPIO116_GPIO | MFP_LPM_FLOAT | MFP_PULL_FLOAT, + + /* LCD */ + GPIO54_LCD_LDD_0, + GPIO55_LCD_LDD_1, + GPIO56_LCD_LDD_2, + GPIO57_LCD_LDD_3, + GPIO58_LCD_LDD_4, + GPIO59_LCD_LDD_5, + GPIO60_LCD_LDD_6, + GPIO61_LCD_LDD_7, + GPIO62_LCD_LDD_8, + GPIO63_LCD_LDD_9, + GPIO64_LCD_LDD_10, + GPIO65_LCD_LDD_11, + GPIO66_LCD_LDD_12, + GPIO67_LCD_LDD_13, + GPIO68_LCD_LDD_14, + GPIO69_LCD_LDD_15, + GPIO70_LCD_LDD_16, + GPIO71_LCD_LDD_17, + GPIO72_LCD_FCLK, + GPIO73_LCD_LCLK, + GPIO74_LCD_PCLK, + GPIO75_LCD_BIAS, +}; + +static mfp_cfg_t raumfeld_connector_pin_config[] __initdata = { + /* UART1 */ + GPIO77_UART1_RXD, + GPIO78_UART1_TXD, + GPIO79_UART1_CTS, + GPIO81_UART1_DSR, + GPIO83_UART1_DTR, + GPIO84_UART1_RTS, + + /* UART3 */ + GPIO110_UART3_RXD, + + /* USB Host */ + GPIO0_2_USBH_PEN, + GPIO1_2_USBH_PWR, + + /* I2C */ + GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT, + GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT, + + /* SPI */ + GPIO34_GPIO, /* SPDIF_CS */ + GPIO96_GPIO, /* MCLK_CS */ + GPIO125_GPIO, /* ACCEL_CS */ + + /* MMC */ + GPIO3_MMC1_DAT0, + GPIO4_MMC1_DAT1, + GPIO5_MMC1_DAT2, + GPIO6_MMC1_DAT3, + GPIO7_MMC1_CLK, + GPIO8_MMC1_CMD, + + /* Ethernet */ + GPIO1_nCS2, /* CS */ + GPIO40_GPIO | MFP_PULL_HIGH, /* IRQ */ + + /* SSP for I2S */ + GPIO85_SSP1_SCLK, + GPIO89_SSP1_EXTCLK, + GPIO86_SSP1_FRM, + GPIO87_SSP1_TXD, + GPIO88_SSP1_RXD, + GPIO90_SSP1_SYSCLK, + + /* SSP2 for S/PDIF */ + GPIO25_SSP2_SCLK, + GPIO26_SSP2_FRM, + GPIO27_SSP2_TXD, + GPIO29_SSP2_EXTCLK, +}; + +static mfp_cfg_t raumfeld_speaker_pin_config[] __initdata = { + /* UART1 */ + GPIO77_UART1_RXD, + GPIO78_UART1_TXD, + GPIO79_UART1_CTS, + GPIO81_UART1_DSR, + GPIO83_UART1_DTR, + GPIO84_UART1_RTS, + + /* UART3 */ + GPIO110_UART3_RXD, + + /* USB Host */ + GPIO0_2_USBH_PEN, + GPIO1_2_USBH_PWR, + + /* I2C */ + GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT, + GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT, + + /* SPI */ + GPIO34_GPIO, /* SPDIF_CS */ + GPIO96_GPIO, /* MCLK_CS */ + GPIO125_GPIO, /* ACCEL_CS */ + + /* MMC */ + GPIO3_MMC1_DAT0, + GPIO4_MMC1_DAT1, + GPIO5_MMC1_DAT2, + GPIO6_MMC1_DAT3, + GPIO7_MMC1_CLK, + GPIO8_MMC1_CMD, + + /* Ethernet */ + GPIO1_nCS2, /* CS */ + GPIO40_GPIO | MFP_PULL_HIGH, /* IRQ */ + + /* SSP for I2S */ + GPIO85_SSP1_SCLK, + GPIO89_SSP1_EXTCLK, + GPIO86_SSP1_FRM, + GPIO87_SSP1_TXD, + GPIO88_SSP1_RXD, + GPIO90_SSP1_SYSCLK, +}; + +/* + * SMSC LAN9220 Ethernet + */ + +static struct resource smc91x_resources[] = { + { + .start = PXA3xx_CS2_PHYS, + .end = PXA3xx_CS2_PHYS + 0xfffff, + .flags = IORESOURCE_MEM, + }, + { + .start = gpio_to_irq(GPIO_ETH_IRQ), + .end = gpio_to_irq(GPIO_ETH_IRQ), + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, + } +}; + +static struct smsc911x_platform_config raumfeld_smsc911x_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, +}; + +static struct platform_device smc91x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, + .dev = { + .platform_data = &raumfeld_smsc911x_config, + } +}; + +/** + * NAND + */ + +static struct mtd_partition raumfeld_nand_partitions[] = { + { + .name = "Bootloader", + .offset = 0, + .size = 0xa0000, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "BootloaderEnvironment", + .offset = 0xa0000, + .size = 0x20000, + }, + { + .name = "BootloaderSplashScreen", + .offset = 0xc0000, + .size = 0x60000, + }, + { + .name = "UBI", + .offset = 0x120000, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct pxa3xx_nand_platform_data raumfeld_nand_info = { + .enable_arbiter = 1, + .keep_config = 1, + .parts = raumfeld_nand_partitions, + .nr_parts = ARRAY_SIZE(raumfeld_nand_partitions), +}; + +/** + * USB (OHCI) support + */ + +static struct pxaohci_platform_data raumfeld_ohci_info = { + .port_mode = PMM_GLOBAL_MODE, + .flags = ENABLE_PORT1, +}; + +/** + * Rotary encoder input device + */ + +static struct rotary_encoder_platform_data raumfeld_rotary_encoder_info = { + .steps = 24, + .axis = REL_X, + .relative_axis = 1, + .gpio_a = GPIO_VOLENC_A, + .gpio_b = GPIO_VOLENC_B, + .inverted_a = 1, + .inverted_b = 0, +}; + +static struct platform_device rotary_encoder_device = { + .name = "rotary-encoder", + .id = 0, + .dev = { + .platform_data = &raumfeld_rotary_encoder_info, + } +}; + +/** + * GPIO buttons + */ + +static struct gpio_keys_button gpio_keys_button[] = { + { + .code = KEY_F1, + .type = EV_KEY, + .gpio = GPIO_KEY1, + .active_low = 1, + .wakeup = 0, + .debounce_interval = 5, /* ms */ + .desc = "Button 1", + }, + { + .code = KEY_F2, + .type = EV_KEY, + .gpio = GPIO_KEY2, + .active_low = 1, + .wakeup = 0, + .debounce_interval = 5, /* ms */ + .desc = "Button 2", + }, + { + .code = KEY_F3, + .type = EV_KEY, + .gpio = GPIO_KEY3, + .active_low = 1, + .wakeup = 0, + .debounce_interval = 5, /* ms */ + .desc = "Button 3", + }, + { + .code = KEY_F4, + .type = EV_KEY, + .gpio = GPIO_RESCUE_BOOT, + .active_low = 0, + .wakeup = 0, + .debounce_interval = 5, /* ms */ + .desc = "rescue boot button", + }, + { + .code = KEY_F5, + .type = EV_KEY, + .gpio = GPIO_DOCK_DETECT, + .active_low = 1, + .wakeup = 0, + .debounce_interval = 5, /* ms */ + .desc = "dock detect", + }, + { + .code = KEY_F6, + .type = EV_KEY, + .gpio = GPIO_ON_OFF, + .active_low = 0, + .wakeup = 0, + .debounce_interval = 5, /* ms */ + .desc = "on/off button", + }, +}; + +static struct gpio_keys_platform_data gpio_keys_platform_data = { + .buttons = gpio_keys_button, + .nbuttons = ARRAY_SIZE(gpio_keys_button), + .rep = 0, +}; + +static struct platform_device raumfeld_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &gpio_keys_platform_data, + } +}; + +/** + * GPIO LEDs + */ + +static struct gpio_led raumfeld_leds[] = { + { + .name = "raumfeld:1", + .gpio = GPIO_LED1, + .active_low = 1, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "raumfeld:2", + .gpio = GPIO_LED2, + .active_low = 0, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + } +}; + +static struct gpio_led_platform_data raumfeld_led_platform_data = { + .leds = raumfeld_leds, + .num_leds = ARRAY_SIZE(raumfeld_leds), +}; + +static struct platform_device raumfeld_led_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &raumfeld_led_platform_data, + }, +}; + +/** + * One-wire (W1 bus) support + */ + +static void w1_enable_external_pullup(int enable) +{ + gpio_set_value(GPIO_W1_PULLUP_ENABLE, enable); + msleep(100); +} + +static struct w1_gpio_platform_data w1_gpio_platform_data = { + .pin = GPIO_ONE_WIRE, + .is_open_drain = 0, + .enable_external_pullup = w1_enable_external_pullup, +}; + +struct platform_device raumfeld_w1_gpio_device = { + .name = "w1-gpio", + .dev = { + .platform_data = &w1_gpio_platform_data + } +}; + +static void __init raumfeld_w1_init(void) +{ + int ret = gpio_request(GPIO_W1_PULLUP_ENABLE, + "W1 external pullup enable"); + + if (ret < 0) + pr_warning("Unable to request GPIO_W1_PULLUP_ENABLE\n"); + else + gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0); + + platform_device_register(&raumfeld_w1_gpio_device); +} + +/** + * Framebuffer device + */ + +/* PWM controlled backlight */ +static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = { + .pwm_id = 0, + .max_brightness = 100, + .dft_brightness = 100, + /* 10000 ns = 10 ms ^= 100 kHz */ + .pwm_period_ns = 10000, +}; + +static struct platform_device raumfeld_pwm_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &raumfeld_pwm_backlight_data, + } +}; + +/* LT3593 controlled backlight */ +static struct gpio_led raumfeld_lt3593_led = { + .name = "backlight", + .gpio = mfp_to_gpio(MFP_PIN_GPIO17), + .default_state = LEDS_GPIO_DEFSTATE_ON, +}; + +static struct gpio_led_platform_data raumfeld_lt3593_platform_data = { + .leds = &raumfeld_lt3593_led, + .num_leds = 1, +}; + +static struct platform_device raumfeld_lt3593_device = { + .name = "leds-lt3593", + .id = -1, + .dev = { + .platform_data = &raumfeld_lt3593_platform_data, + }, +}; + +static struct pxafb_mode_info sharp_lq043t3dx02_mode = { + .pixclock = 111000, + .xres = 480, + .yres = 272, + .bpp = 16, + .hsync_len = 4, + .left_margin = 2, + .right_margin = 1, + .vsync_len = 1, + .upper_margin = 3, + .lower_margin = 1, + .sync = 0, +}; + +static struct pxafb_mach_info raumfeld_sharp_lcd_info = { + .modes = &sharp_lq043t3dx02_mode, + .num_modes = 1, + .video_mem_size = 0x400000, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, +}; + +static void __init raumfeld_lcd_init(void) +{ + int ret; + + set_pxa_fb_info(&raumfeld_sharp_lcd_info); + + /* Earlier devices had the backlight regulator controlled + * via PWM, later versions use another controller for that */ + if ((system_rev & 0xff) < 2) { + mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT; + pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1); + platform_device_register(&raumfeld_pwm_backlight_device); + } else + platform_device_register(&raumfeld_lt3593_device); + + ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable"); + if (ret < 0) + pr_warning("Unable to request GPIO_TFT_VA_EN\n"); + else + gpio_direction_output(GPIO_TFT_VA_EN, 1); + + ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable"); + if (ret < 0) + pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n"); + else + gpio_direction_output(GPIO_DISPLAY_ENABLE, 1); +} + +/** + * SPI devices + */ + +struct spi_gpio_platform_data raumfeld_spi_platform_data = { + .sck = GPIO_SPI_CLK, + .mosi = GPIO_SPI_MOSI, + .miso = GPIO_SPI_MISO, + .num_chipselect = 3, +}; + +static struct platform_device raumfeld_spi_device = { + .name = "spi_gpio", + .id = 0, + .dev = { + .platform_data = &raumfeld_spi_platform_data, + } +}; + +static struct lis3lv02d_platform_data lis3_pdata = { + .click_flags = LIS3_CLICK_SINGLE_X | + LIS3_CLICK_SINGLE_Y | + LIS3_CLICK_SINGLE_Z, + .irq_cfg = LIS3_IRQ1_CLICK | LIS3_IRQ2_CLICK, + .wakeup_flags = LIS3_WAKEUP_X_LO | LIS3_WAKEUP_X_HI | + LIS3_WAKEUP_Y_LO | LIS3_WAKEUP_Y_HI | + LIS3_WAKEUP_Z_LO | LIS3_WAKEUP_Z_HI, + .wakeup_thresh = 10, + .click_thresh_x = 10, + .click_thresh_y = 10, + .click_thresh_z = 10, +}; + +#define SPI_AK4104 \ +{ \ + .modalias = "ak4104", \ + .max_speed_hz = 10000, \ + .bus_num = 0, \ + .chip_select = 0, \ + .controller_data = (void *) GPIO_SPDIF_CS, \ +} + +#define SPI_LIS3 \ +{ \ + .modalias = "lis3lv02d_spi", \ + .max_speed_hz = 1000000, \ + .bus_num = 0, \ + .chip_select = 1, \ + .controller_data = (void *) GPIO_ACCEL_CS, \ + .platform_data = &lis3_pdata, \ + .irq = gpio_to_irq(GPIO_ACCEL_IRQ), \ +} + +#define SPI_DAC7512 \ +{ \ + .modalias = "dac7512", \ + .max_speed_hz = 1000000, \ + .bus_num = 0, \ + .chip_select = 2, \ + .controller_data = (void *) GPIO_MCLK_DAC_CS, \ +} + +static struct spi_board_info connector_spi_devices[] __initdata = { + SPI_AK4104, + SPI_DAC7512, +}; + +static struct spi_board_info speaker_spi_devices[] __initdata = { + SPI_DAC7512, +}; + +static struct spi_board_info controller_spi_devices[] __initdata = { + SPI_LIS3, +}; + +/** + * MMC for Marvell Libertas 8688 via SDIO + */ + +static int raumfeld_mci_init(struct device *dev, irq_handler_t isr, void *data) +{ + gpio_set_value(GPIO_W2W_RESET, 1); + gpio_set_value(GPIO_W2W_PDN, 1); + + return 0; +} + +static void raumfeld_mci_exit(struct device *dev, void *data) +{ + gpio_set_value(GPIO_W2W_RESET, 0); + gpio_set_value(GPIO_W2W_PDN, 0); +} + +static struct pxamci_platform_data raumfeld_mci_platform_data = { + .init = raumfeld_mci_init, + .exit = raumfeld_mci_exit, + .detect_delay = 20, + .gpio_card_detect = -1, + .gpio_card_ro = -1, + .gpio_power = -1, +}; + +/* + * External power / charge logic + */ + +static int power_supply_init(struct device *dev) +{ + return 0; +} + +static void power_supply_exit(struct device *dev) +{ +} + +static int raumfeld_is_ac_online(void) +{ + return !gpio_get_value(GPIO_CHARGE_DC_OK); +} + +static int raumfeld_is_usb_online(void) +{ + return 0; +} + +static char *raumfeld_power_supplicants[] = { "ds2760-battery.0" }; + +static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, + .is_ac_online = raumfeld_is_ac_online, + .is_usb_online = raumfeld_is_usb_online, + .exit = power_supply_exit, + .supplied_to = raumfeld_power_supplicants, + .num_supplicants = ARRAY_SIZE(raumfeld_power_supplicants) +}; + +static struct resource power_supply_resources[] = { + { + .name = "ac", + .flags = IORESOURCE_IRQ | + IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, + .start = GPIO_CHARGE_DC_OK, + .end = GPIO_CHARGE_DC_OK, + }, +}; + +static irqreturn_t charge_done_irq(int irq, void *dev_id) +{ + struct power_supply *psy; + + psy = power_supply_get_by_name("ds2760-battery.0"); + + if (psy) + power_supply_set_battery_charged(psy); + + return IRQ_HANDLED; +} + +static struct platform_device raumfeld_power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = &power_supply_info, + }, + .resource = power_supply_resources, + .num_resources = ARRAY_SIZE(power_supply_resources), +}; + +static void __init raumfeld_power_init(void) +{ + int ret; + + /* Set PEN2 high to enable maximum charge current */ + ret = gpio_request(GPIO_CHRG_PEN2, "CHRG_PEN2"); + if (ret < 0) + pr_warning("Unable to request GPIO_CHRG_PEN2\n"); + else + gpio_direction_output(GPIO_CHRG_PEN2, 1); + + ret = gpio_request(GPIO_CHARGE_DC_OK, "CABLE_DC_OK"); + if (ret < 0) + pr_warning("Unable to request GPIO_CHARGE_DC_OK\n"); + + ret = gpio_request(GPIO_CHARGE_USB_SUSP, "CHARGE_USB_SUSP"); + if (ret < 0) + pr_warning("Unable to request GPIO_CHARGE_USB_SUSP\n"); + else + gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0); + + power_supply_resources[0].start = gpio_to_irq(GPIO_CHARGE_DC_OK); + power_supply_resources[0].end = gpio_to_irq(GPIO_CHARGE_DC_OK); + + ret = request_irq(gpio_to_irq(GPIO_CHARGE_DONE), + &charge_done_irq, IORESOURCE_IRQ_LOWEDGE, + "charge_done", NULL); + + if (ret < 0) + printk(KERN_ERR "%s: unable to register irq %d\n", __func__, + GPIO_CHARGE_DONE); + else + platform_device_register(&raumfeld_power_supply); +} + +/* Fixed regulator for AUDIO_VA, 0-0048 maps to the cs4270 codec device */ + +static struct regulator_consumer_supply audio_va_consumer_supply = + REGULATOR_SUPPLY("va", "0-0048"); + +struct regulator_init_data audio_va_initdata = { + .consumer_supplies = &audio_va_consumer_supply, + .num_consumer_supplies = 1, + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +static struct fixed_voltage_config audio_va_config = { + .supply_name = "audio_va", + .microvolts = 5000000, + .gpio = GPIO_AUDIO_VA_ENABLE, + .enable_high = 1, + .enabled_at_boot = 0, + .init_data = &audio_va_initdata, +}; + +static struct platform_device audio_va_device = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &audio_va_config, + }, +}; + +/* Dummy supplies for Codec's VD/VLC */ + +static struct regulator_consumer_supply audio_dummy_supplies[] = { + REGULATOR_SUPPLY("vd", "0-0048"), + REGULATOR_SUPPLY("vlc", "0-0048"), +}; + +struct regulator_init_data audio_dummy_initdata = { + .consumer_supplies = audio_dummy_supplies, + .num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies), + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +static struct fixed_voltage_config audio_dummy_config = { + .supply_name = "audio_vd", + .microvolts = 3300000, + .gpio = -1, + .init_data = &audio_dummy_initdata, +}; + +static struct platform_device audio_supply_dummy_device = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &audio_dummy_config, + }, +}; + +static struct platform_device *audio_regulator_devices[] = { + &audio_va_device, + &audio_supply_dummy_device, +}; + +/** + * Regulator support via MAX8660 + */ + +static struct regulator_consumer_supply vcc_mmc_supply = + REGULATOR_SUPPLY("vmmc", "pxa2xx-mci.0"); + +static struct regulator_init_data vcc_mmc_init_data = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_MODE, + }, + .consumer_supplies = &vcc_mmc_supply, + .num_consumer_supplies = 1, +}; + +struct max8660_subdev_data max8660_v6_subdev_data = { + .id = MAX8660_V6, + .name = "vmmc", + .platform_data = &vcc_mmc_init_data, +}; + +static struct max8660_platform_data max8660_pdata = { + .subdevs = &max8660_v6_subdev_data, + .num_subdevs = 1, +}; + +/** + * I2C devices + */ + +static struct i2c_board_info raumfeld_pwri2c_board_info = { + .type = "max8660", + .addr = 0x34, + .platform_data = &max8660_pdata, +}; + +static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = { + .type = "cs4270", + .addr = 0x48, +}; + +static struct eeti_ts_platform_data eeti_ts_pdata = { + .irq_active_high = 1, +}; + +static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = { + .type = "eeti_ts", + .addr = 0x0a, + .irq = gpio_to_irq(GPIO_TOUCH_IRQ), + .platform_data = &eeti_ts_pdata, +}; + +static struct platform_device *raumfeld_common_devices[] = { + &raumfeld_gpio_keys_device, + &raumfeld_led_device, + &raumfeld_spi_device, +}; + +static void __init raumfeld_audio_init(void) +{ + int ret; + + ret = gpio_request(GPIO_CODEC_RESET, "cs4270 reset"); + if (ret < 0) + pr_warning("unable to request GPIO_CODEC_RESET\n"); + else + gpio_direction_output(GPIO_CODEC_RESET, 1); + + ret = gpio_request(GPIO_SPDIF_RESET, "ak4104 s/pdif reset"); + if (ret < 0) + pr_warning("unable to request GPIO_SPDIF_RESET\n"); + else + gpio_direction_output(GPIO_SPDIF_RESET, 1); + + ret = gpio_request(GPIO_MCLK_RESET, "MCLK reset"); + if (ret < 0) + pr_warning("unable to request GPIO_MCLK_RESET\n"); + else + gpio_direction_output(GPIO_MCLK_RESET, 1); + + platform_add_devices(ARRAY_AND_SIZE(audio_regulator_devices)); +} + +static void __init raumfeld_common_init(void) +{ + int ret; + + /* The on/off button polarity has changed after revision 1 */ + if ((system_rev & 0xff) > 1) { + int i; + + for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++) + if (!strcmp(gpio_keys_button[i].desc, "on/off button")) + gpio_keys_button[i].active_low = 1; + } + + enable_irq_wake(IRQ_WAKEUP0); + + pxa3xx_set_nand_info(&raumfeld_nand_info); + pxa3xx_set_i2c_power_info(NULL); + pxa_set_ohci_info(&raumfeld_ohci_info); + pxa_set_mci_info(&raumfeld_mci_platform_data); + pxa_set_i2c_info(NULL); + pxa_set_ffuart_info(NULL); + + ret = gpio_request(GPIO_W2W_RESET, "Wi2Wi reset"); + if (ret < 0) + pr_warning("Unable to request GPIO_W2W_RESET\n"); + else + gpio_direction_output(GPIO_W2W_RESET, 0); + + ret = gpio_request(GPIO_W2W_PDN, "Wi2Wi powerup"); + if (ret < 0) + pr_warning("Unable to request GPIO_W2W_PDN\n"); + else + gpio_direction_output(GPIO_W2W_PDN, 0); + + /* this can be used to switch off the device */ + ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, + "supply shutdown"); + if (ret < 0) + pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n"); + else + gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0); + + platform_add_devices(ARRAY_AND_SIZE(raumfeld_common_devices)); + i2c_register_board_info(1, &raumfeld_pwri2c_board_info, 1); +} + +static void __init raumfeld_controller_init(void) +{ + int ret; + + pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config)); + platform_device_register(&rotary_encoder_device); + spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices)); + i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1); + + ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown"); + if (ret < 0) + pr_warning("Unable to request GPIO_SHUTDOWN_BATT\n"); + else + gpio_direction_output(GPIO_SHUTDOWN_BATT, 0); + + raumfeld_common_init(); + raumfeld_power_init(); + raumfeld_lcd_init(); + raumfeld_w1_init(); +} + +static void __init raumfeld_connector_init(void) +{ + pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_connector_pin_config)); + spi_register_board_info(ARRAY_AND_SIZE(connector_spi_devices)); + i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1); + + platform_device_register(&smc91x_device); + + raumfeld_audio_init(); + raumfeld_common_init(); +} + +static void __init raumfeld_speaker_init(void) +{ + pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_speaker_pin_config)); + spi_register_board_info(ARRAY_AND_SIZE(speaker_spi_devices)); + i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1); + + platform_device_register(&smc91x_device); + platform_device_register(&rotary_encoder_device); + + raumfeld_audio_init(); + raumfeld_common_init(); +} + +/* physical memory regions */ +#define RAUMFELD_SDRAM_BASE 0xa0000000 /* SDRAM region */ + +#ifdef CONFIG_MACH_RAUMFELD_RC +MACHINE_START(RAUMFELD_RC, "Raumfeld Controller") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = RAUMFELD_SDRAM_BASE + 0x100, + .init_machine = raumfeld_controller_init, + .map_io = pxa_map_io, + .init_irq = pxa3xx_init_irq, + .timer = &pxa_timer, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_RAUMFELD_CONNECTOR +MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = RAUMFELD_SDRAM_BASE + 0x100, + .init_machine = raumfeld_connector_init, + .map_io = pxa_map_io, + .init_irq = pxa3xx_init_irq, + .timer = &pxa_timer, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_RAUMFELD_SPEAKER +MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = RAUMFELD_SDRAM_BASE + 0x100, + .init_machine = raumfeld_speaker_init, + .map_io = pxa_map_io, + .init_irq = pxa3xx_init_irq, + .timer = &pxa_timer, +MACHINE_END +#endif diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-track.h index f8b879a7973..acb25910380 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-track.h @@ -15,7 +15,6 @@ #ifndef __ASM_ARCH_GPIO_CORE_H #define __ASM_ARCH_GPIO_CORE_H __FILE__ -#include <plat/gpio-core.h> #include <mach/regs-gpio.h> extern struct s3c_gpio_chip s3c24xx_gpios[]; diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index 06a84adfb13..7047317ed7f 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -153,7 +153,7 @@ static struct platform_device *amlm5900_devices[] __initdata = { &s3c_device_adc, &s3c_device_wdt, &s3c_device_i2c0, - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_rtc, &s3c_device_usbgadget, &s3c_device_sdi, diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 97162fdd059..02b1b6220cb 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -584,7 +584,7 @@ static struct s3c_hwmon_pdata bast_hwmon_info = { // cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0 static struct platform_device *bast_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 1e34abe1a19..fbedd076094 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -196,7 +196,7 @@ static struct platform_device h1940_device_bluetooth = { .id = -1, }; -static struct s3c24xx_mci_pdata h1940_mmc_cfg = { +static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = { .gpio_detect = S3C2410_GPF(5), .gpio_wprotect = S3C2410_GPH(8), .set_power = NULL, @@ -272,7 +272,7 @@ static struct platform_device h1940_lcd_powerdev = { static struct platform_device *h1940_devices[] __initdata = { &s3c_device_ts, - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, @@ -311,12 +311,11 @@ static void __init h1940_init(void) u32 tmp; s3c24xx_fb_set_platdata(&h1940_fb_info); + s3c24xx_mci_set_platdata(&h1940_mmc_cfg); s3c24xx_udc_set_platdata(&h1940_udc_cfg); s3c24xx_ts_set_platdata(&h1940_ts_cfg); s3c_i2c0_set_platdata(NULL); - s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg; - /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 0405712c226..684710f8814 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -322,7 +322,7 @@ static struct platform_device *n30_devices[] __initdata = { &s3c_device_wdt, &s3c_device_i2c0, &s3c_device_iis, - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_usbgadget, &n30_button_device, &n30_blue_led, diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c index f6c7261a4a1..d8c7f2efc1a 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c2410/mach-otom.c @@ -92,7 +92,7 @@ static struct platform_device otom_device_nor = { /* Standard OTOM devices */ static struct platform_device *otom11_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index ab092bcda39..92a4ec375d8 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -246,7 +246,7 @@ static struct platform_device qt2410_spi = { /* Board devices */ static struct platform_device *qt2410_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index c49126ccb1d..45222304220 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -87,7 +87,7 @@ static struct s3c2410_uartcfg smdk2410_uartcfgs[] __initdata = { }; static struct platform_device *smdk2410_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c index 8fdb0430bd4..929164a8e9b 100644 --- a/arch/arm/mach-s3c2410/mach-tct_hammer.c +++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c @@ -129,7 +129,7 @@ static struct platform_device *tct_hammer_devices[] __initdata = { &s3c_device_adc, &s3c_device_wdt, &s3c_device_i2c0, - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_rtc, &s3c_device_usbgadget, &s3c_device_sdi, diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 0d61fb57717..9051f0d3112 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -334,7 +334,7 @@ static struct i2c_board_info vr1000_i2c_devs[] __initdata = { /* devices for this board */ static struct platform_device *vr1000_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c index 6b9d0d83a6f..29bd3d987be 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.c +++ b/arch/arm/mach-s3c2410/usb-simtec.c @@ -91,7 +91,7 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on) } } -static struct s3c2410_hcd_info usb_simtec_info = { +static struct s3c2410_hcd_info usb_simtec_info __initdata = { .port[0] = { .flags = S3C_HCDFLG_USED }, @@ -127,6 +127,6 @@ int usb_simtec_init(void) gpio_direction_output(S3C2410_GPB(4), 1); gpio_direction_input(S3C2410_GPG(10)); - s3c_device_usb.dev.platform_data = &usb_simtec_info; + s3c_ohci_set_platdata(&usb_simtec_info); return 0; } diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c index a037df5e1c2..0c0505b025c 100644 --- a/arch/arm/mach-s3c2412/clock.c +++ b/arch/arm/mach-s3c2412/clock.c @@ -124,7 +124,9 @@ static struct clk clk_usysclk = { .name = "usysclk", .id = -1, .parent = &clk_xtal, - .set_parent = s3c2412_setparent_usysclk, + .ops = &(struct clk_ops) { + .set_parent = s3c2412_setparent_usysclk, + }, }; static struct clk clk_mrefclk = { @@ -199,10 +201,12 @@ static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate) static struct clk clk_usbsrc = { .name = "usbsrc", .id = -1, - .get_rate = s3c2412_getrate_usbsrc, - .set_rate = s3c2412_setrate_usbsrc, - .round_rate = s3c2412_roundrate_usbsrc, - .set_parent = s3c2412_setparent_usbsrc, + .ops = &(struct clk_ops) { + .get_rate = s3c2412_getrate_usbsrc, + .set_rate = s3c2412_setrate_usbsrc, + .round_rate = s3c2412_roundrate_usbsrc, + .set_parent = s3c2412_setparent_usbsrc, + }, }; static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent) @@ -225,7 +229,9 @@ static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent) static struct clk clk_msysclk = { .name = "msysclk", .id = -1, - .set_parent = s3c2412_setparent_msysclk, + .ops = &(struct clk_ops) { + .set_parent = s3c2412_setparent_msysclk, + }, }; static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent) @@ -264,7 +270,9 @@ static struct clk clk_armclk = { .name = "armclk", .id = -1, .parent = &clk_msysclk, - .set_parent = s3c2412_setparent_armclk, + .ops = &(struct clk_ops) { + .set_parent = s3c2412_setparent_armclk, + }, }; /* these next clocks have an divider immediately after them, @@ -337,10 +345,12 @@ static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate) static struct clk clk_uart = { .name = "uartclk", .id = -1, - .get_rate = s3c2412_getrate_uart, - .set_rate = s3c2412_setrate_uart, - .set_parent = s3c2412_setparent_uart, - .round_rate = s3c2412_roundrate_clksrc, + .ops = &(struct clk_ops) { + .get_rate = s3c2412_getrate_uart, + .set_rate = s3c2412_setrate_uart, + .set_parent = s3c2412_setparent_uart, + .round_rate = s3c2412_roundrate_clksrc, + }, }; static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent) @@ -388,10 +398,12 @@ static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate) static struct clk clk_i2s = { .name = "i2sclk", .id = -1, - .get_rate = s3c2412_getrate_i2s, - .set_rate = s3c2412_setrate_i2s, - .set_parent = s3c2412_setparent_i2s, - .round_rate = s3c2412_roundrate_clksrc, + .ops = &(struct clk_ops) { + .get_rate = s3c2412_getrate_i2s, + .set_rate = s3c2412_setrate_i2s, + .set_parent = s3c2412_setparent_i2s, + .round_rate = s3c2412_roundrate_clksrc, + }, }; static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent) @@ -438,10 +450,12 @@ static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate) static struct clk clk_cam = { .name = "camif-upll", /* same as 2440 name */ .id = -1, - .get_rate = s3c2412_getrate_cam, - .set_rate = s3c2412_setrate_cam, - .set_parent = s3c2412_setparent_cam, - .round_rate = s3c2412_roundrate_clksrc, + .ops = &(struct clk_ops) { + .get_rate = s3c2412_getrate_cam, + .set_rate = s3c2412_setrate_cam, + .set_parent = s3c2412_setparent_cam, + .round_rate = s3c2412_roundrate_clksrc, + }, }; /* standard clock definitions */ diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index c9fa3fca486..14f4798291a 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -468,7 +468,7 @@ static struct i2c_board_info jive_i2c_devs[] __initdata = { /* The platform devices being used. */ static struct platform_device *jive_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_rtc, &s3c_device_wdt, &s3c_device_i2c0, diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index 9a5e4341972..0392065af1a 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -104,8 +104,7 @@ static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = { static struct platform_device *smdk2413_devices[] __initdata = { - &s3c_device_usb, - //&s3c_device_lcd, + &s3c_device_ohci, &s3c_device_wdt, &s3c_device_i2c0, &s3c_device_iis, diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c index a6ba591b26b..3ca9265b699 100644 --- a/arch/arm/mach-s3c2412/mach-vstms.c +++ b/arch/arm/mach-s3c2412/mach-vstms.c @@ -121,7 +121,7 @@ static struct s3c2410_platform_nand __initdata vstms_nand_info = { }; static struct platform_device *vstms_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_wdt, &s3c_device_i2c0, &s3c_device_iis, diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c index d1c29b2537c..3dc2426e234 100644 --- a/arch/arm/mach-s3c2440/clock.c +++ b/arch/arm/mach-s3c2440/clock.c @@ -98,8 +98,10 @@ static struct clk s3c2440_clk_cam = { static struct clk s3c2440_clk_cam_upll = { .name = "camif-upll", .id = -1, - .set_rate = s3c2440_camif_upll_setrate, - .round_rate = s3c2440_camif_upll_round, + .ops = &(struct clk_ops) { + .set_rate = s3c2440_camif_upll_setrate, + .round_rate = s3c2440_camif_upll_round, + }, }; static struct clk s3c2440_clk_ac97 = { diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index 62a4c3eba97..b73f78a9da5 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -409,7 +409,7 @@ static struct platform_device anubis_device_sm501 = { /* Standard Anubis devices */ static struct platform_device *anubis_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_wdt, &s3c_device_adc, &s3c_device_i2c0, diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c index aa69290e04c..84725791e6b 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c2440/mach-at2440evb.c @@ -165,7 +165,7 @@ static struct platform_device at2440evb_device_eth = { }, }; -static struct s3c24xx_mci_pdata at2440evb_mci_pdata = { +static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = { .gpio_detect = S3C2410_GPG(10), }; @@ -203,7 +203,7 @@ static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = { }; static struct platform_device *at2440evb_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_wdt, &s3c_device_adc, &s3c_device_i2c0, @@ -216,8 +216,6 @@ static struct platform_device *at2440evb_devices[] __initdata = { static void __init at2440evb_map_io(void) { - s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata; - s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc)); s3c24xx_init_clocks(16934400); s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs)); @@ -226,6 +224,7 @@ static void __init at2440evb_map_io(void) static void __init at2440evb_init(void) { s3c24xx_fb_set_platdata(&at2440evb_fb_info); + s3c24xx_mci_set_platdata(&at2440evb_mci_pdata); s3c_nand_set_platdata(&at2440evb_nand_info); s3c_i2c0_set_platdata(NULL); diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index 2068e9096a4..571b17683d9 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -506,9 +506,8 @@ static struct i2c_board_info mini2440_i2c_devs[] __initdata = { }; static struct platform_device *mini2440_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_wdt, -/* &s3c_device_adc,*/ /* ADC doesn't like living with touchscreen ! */ &s3c_device_i2c0, &s3c_device_rtc, &s3c_device_usbgadget, @@ -522,8 +521,6 @@ static struct platform_device *mini2440_devices[] __initdata = { &s3c_device_sdi, &s3c_device_iis, &mini2440_audio, -/* &s3c_device_timer[0],*/ /* buzzer pwm, no API for it */ - /* remaining devices are optional */ }; static void __init mini2440_map_io(void) @@ -531,8 +528,6 @@ static void __init mini2440_map_io(void) s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs)); - - s3c_device_sdi.dev.platform_data = &mini2440_mmc_cfg; } /* @@ -678,6 +673,7 @@ static void __init mini2440_init(void) } s3c24xx_udc_set_platdata(&mini2440_udc_cfg); + s3c24xx_mci_set_platdata(&mini2440_mmc_cfg); s3c_nand_set_platdata(&mini2440_nand_info); s3c_i2c0_set_platdata(NULL); diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c index d43edede590..86a243b3e37 100644 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ b/arch/arm/mach-s3c2440/mach-nexcoder.c @@ -106,7 +106,7 @@ static struct platform_device nexcoder_device_nor = { /* Standard Nexcoder devices */ static struct platform_device *nexcoder_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index a952a13afb1..1e836e506f8 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -176,7 +176,7 @@ static struct s3c2410_platform_nand __initdata rx3715_nand_info = { }; static struct platform_device *rx3715_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c index ec13e748ccc..df3e9a3be82 100644 --- a/arch/arm/mach-s3c2440/mach-smdk2440.c +++ b/arch/arm/mach-s3c2440/mach-smdk2440.c @@ -150,7 +150,7 @@ static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = { }; static struct platform_device *smdk2440_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c index ea1aa1f5157..d9b692a1248 100644 --- a/arch/arm/mach-s3c2442/clock.c +++ b/arch/arm/mach-s3c2442/clock.c @@ -109,8 +109,10 @@ static struct clk s3c2442_clk_cam = { static struct clk s3c2442_clk_cam_upll = { .name = "camif-upll", .id = -1, - .set_rate = s3c2442_camif_upll_setrate, - .round_rate = s3c2442_camif_upll_round, + .ops = &(struct clk_ops) { + .set_rate = s3c2442_camif_upll_setrate, + .round_rate = s3c2442_camif_upll_round, + }, }; static int s3c2442_clk_add(struct sys_device *sysdev) diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c index 0b4a3a03071..45799c608d8 100644 --- a/arch/arm/mach-s3c2442/mach-gta02.c +++ b/arch/arm/mach-s3c2442/mach-gta02.c @@ -544,7 +544,7 @@ static struct platform_device gta02_bl_dev = { /* USB */ -static struct s3c2410_hcd_info gta02_usb_info = { +static struct s3c2410_hcd_info gta02_usb_info __initdata = { .port[0] = { .flags = S3C_HCDFLG_USED, }, @@ -565,7 +565,7 @@ static void __init gta02_map_io(void) /* These are the guys that don't need to be children of PMU. */ static struct platform_device *gta02_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_wdt, &s3c_device_sdi, &s3c_device_usbgadget, @@ -623,9 +623,8 @@ static void __init gta02_machine_init(void) INIT_DELAYED_WORK(>a02_charger_work, gta02_charger_worker); #endif - s3c_device_usb.dev.platform_data = >a02_usb_info; - s3c24xx_udc_set_platdata(>a02_udc_cfg); + s3c_ohci_set_platdata(>a02_usb_info); s3c_nand_set_platdata(>a02_nand_info); s3c_i2c0_set_platdata(NULL); diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index 2785d69c95b..3eb8b935d64 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -187,7 +187,9 @@ static int s3c2443_setparent_epllref(struct clk *clk, struct clk *parent) static struct clk clk_epllref = { .name = "epllref", .id = -1, - .set_parent = s3c2443_setparent_epllref, + .ops = &(struct clk_ops) { + .set_parent = s3c2443_setparent_epllref, + }, }; static unsigned long s3c2443_getrate_mdivclk(struct clk *clk) @@ -205,7 +207,9 @@ static struct clk clk_mdivclk = { .name = "mdivclk", .parent = &clk_mpllref, .id = -1, - .get_rate = s3c2443_getrate_mdivclk, + .ops = &(struct clk_ops) { + .get_rate = s3c2443_getrate_mdivclk, + }, }; static int s3c2443_setparent_msysclk(struct clk *clk, struct clk *parent) @@ -232,7 +236,9 @@ static struct clk clk_msysclk = { .name = "msysclk", .parent = &clk_xtal, .id = -1, - .set_parent = s3c2443_setparent_msysclk, + .ops = &(struct clk_ops) { + .set_parent = s3c2443_setparent_msysclk, + }, }; /* armdiv @@ -273,7 +279,9 @@ static int s3c2443_setparent_armclk(struct clk *clk, struct clk *parent) static struct clk clk_arm = { .name = "armclk", .id = -1, - .set_parent = s3c2443_setparent_armclk, + .ops = &(struct clk_ops) { + .set_parent = s3c2443_setparent_armclk, + }, }; /* esysclk @@ -302,7 +310,9 @@ static struct clk clk_esysclk = { .name = "esysclk", .parent = &clk_epll, .id = -1, - .set_parent = s3c2443_setparent_esysclk, + .ops = &(struct clk_ops) { + .set_parent = s3c2443_setparent_esysclk, + }, }; /* uartclk @@ -341,9 +351,11 @@ static struct clk clk_uart = { .name = "uartclk", .id = -1, .parent = &clk_esysclk, - .get_rate = s3c2443_getrate_uart, - .set_rate = s3c2443_setrate_uart, - .round_rate = s3c2443_roundrate_clksrc16, + .ops = &(struct clk_ops) { + .get_rate = s3c2443_getrate_uart, + .set_rate = s3c2443_setrate_uart, + .round_rate = s3c2443_roundrate_clksrc16, + }, }; /* hsspi @@ -384,9 +396,11 @@ static struct clk clk_hsspi = { .parent = &clk_esysclk, .ctrlbit = S3C2443_SCLKCON_HSSPICLK, .enable = s3c2443_clkcon_enable_s, - .get_rate = s3c2443_getrate_hsspi, - .set_rate = s3c2443_setrate_hsspi, - .round_rate = s3c2443_roundrate_clksrc4, + .ops = &(struct clk_ops) { + .get_rate = s3c2443_getrate_hsspi, + .set_rate = s3c2443_setrate_hsspi, + .round_rate = s3c2443_roundrate_clksrc4, + }, }; /* usbhost @@ -426,9 +440,11 @@ static struct clk clk_usb_bus_host = { .parent = &clk_esysclk, .ctrlbit = S3C2443_SCLKCON_USBHOST, .enable = s3c2443_clkcon_enable_s, - .get_rate = s3c2443_getrate_usbhost, - .set_rate = s3c2443_setrate_usbhost, - .round_rate = s3c2443_roundrate_clksrc4, + .ops = &(struct clk_ops) { + .get_rate = s3c2443_getrate_usbhost, + .set_rate = s3c2443_setrate_usbhost, + .round_rate = s3c2443_roundrate_clksrc4, + }, }; /* clk_hsmcc_div @@ -468,9 +484,11 @@ static struct clk clk_hsmmc_div = { .name = "hsmmc-div", .id = -1, .parent = &clk_esysclk, - .get_rate = s3c2443_getrate_hsmmc_div, - .set_rate = s3c2443_setrate_hsmmc_div, - .round_rate = s3c2443_roundrate_clksrc4, + .ops = &(struct clk_ops) { + .get_rate = s3c2443_getrate_hsmmc_div, + .set_rate = s3c2443_setrate_hsmmc_div, + .round_rate = s3c2443_roundrate_clksrc4, + }, }; static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent) @@ -505,7 +523,9 @@ static struct clk clk_hsmmc = { .id = -1, .parent = &clk_hsmmc_div, .enable = s3c2443_enable_hsmmc, - .set_parent = s3c2443_setparent_hsmmc, + .ops = &(struct clk_ops) { + .set_parent = s3c2443_setparent_hsmmc, + }, }; /* i2s_eplldiv @@ -543,9 +563,11 @@ static struct clk clk_i2s_eplldiv = { .name = "i2s-eplldiv", .id = -1, .parent = &clk_esysclk, - .get_rate = s3c2443_getrate_i2s_eplldiv, - .set_rate = s3c2443_setrate_i2s_eplldiv, - .round_rate = s3c2443_roundrate_clksrc16, + .ops = &(struct clk_ops) { + .get_rate = s3c2443_getrate_i2s_eplldiv, + .set_rate = s3c2443_setrate_i2s_eplldiv, + .round_rate = s3c2443_roundrate_clksrc16, + }, }; /* i2s-ref @@ -578,7 +600,9 @@ static struct clk clk_i2s = { .parent = &clk_i2s_eplldiv, .ctrlbit = S3C2443_SCLKCON_I2SCLK, .enable = s3c2443_clkcon_enable_s, - .set_parent = s3c2443_setparent_i2s, + .ops = &(struct clk_ops) { + .set_parent = s3c2443_setparent_i2s, + }, }; /* cam-if @@ -618,9 +642,11 @@ static struct clk clk_cam = { .parent = &clk_esysclk, .ctrlbit = S3C2443_SCLKCON_CAMCLK, .enable = s3c2443_clkcon_enable_s, - .get_rate = s3c2443_getrate_cam, - .set_rate = s3c2443_setrate_cam, - .round_rate = s3c2443_roundrate_clksrc16, + .ops = &(struct clk_ops) { + .get_rate = s3c2443_getrate_cam, + .set_rate = s3c2443_setrate_cam, + .round_rate = s3c2443_roundrate_clksrc16, + }, }; /* display-if @@ -660,9 +686,11 @@ static struct clk clk_display = { .parent = &clk_esysclk, .ctrlbit = S3C2443_SCLKCON_DISPCLK, .enable = s3c2443_clkcon_enable_s, - .get_rate = s3c2443_getrate_display, - .set_rate = s3c2443_setrate_display, - .round_rate = s3c2443_roundrate_clksrc256, + .ops = &(struct clk_ops) { + .get_rate = s3c2443_getrate_display, + .set_rate = s3c2443_setrate_display, + .round_rate = s3c2443_roundrate_clksrc256, + }, }; /* prediv @@ -685,7 +713,9 @@ static struct clk clk_prediv = { .name = "prediv", .id = -1, .parent = &clk_msysclk, - .get_rate = s3c2443_prediv_getrate, + .ops = &(struct clk_ops) { + .get_rate = s3c2443_prediv_getrate, + }, }; /* standard clock definitions */ @@ -1074,14 +1104,7 @@ void __init s3c2443_init_clocks(int xtal) /* register clocks from clock array */ - clkp = init_clocks; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); /* We must be careful disabling the clocks we are not intending to * be using at boot time, as subsystems such as the LCD which do diff --git a/arch/arm/mach-s3c6400/include/mach/entry-macro.S b/arch/arm/mach-s3c6400/include/mach/entry-macro.S index fbd90d2cf35..33a8fe24088 100644 --- a/arch/arm/mach-s3c6400/include/mach/entry-macro.S +++ b/arch/arm/mach-s3c6400/include/mach/entry-macro.S @@ -12,33 +12,7 @@ * warranty of any kind, whether express or implied. */ -#include <asm/hardware/vic.h> #include <mach/map.h> #include <plat/irqs.h> - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =S3C_VA_VIC0 - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - @ check the vic0 - mov \irqnr, # S3C_IRQ_OFFSET + 31 - ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] - teq \irqstat, #0 - - @ otherwise try vic1 - addeq \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0) - addeq \irqnr, \irqnr, #32 - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - clzne \irqstat, \irqstat - subne \irqnr, \irqnr, \irqstat - .endm +#include <asm/entry-macro-vic2.S> diff --git a/arch/arm/mach-s3c6400/include/mach/gpio-core.h b/arch/arm/mach-s3c6400/include/mach/gpio-core.h deleted file mode 100644 index d89aae68b0a..00000000000 --- a/arch/arm/mach-s3c6400/include/mach/gpio-core.h +++ /dev/null @@ -1,21 +0,0 @@ -/* arch/arm/mach-s3c6400/include/mach/gpio-core.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX - GPIO core support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_CORE_H -#define __ASM_ARCH_GPIO_CORE_H __FILE__ - -/* currently we just include the platform support */ -#include <plat/gpio-core.h> - -#endif /* __ASM_ARCH_GPIO_CORE_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h index 106ee13581e..801c1c0f3a9 100644 --- a/arch/arm/mach-s3c6400/include/mach/map.h +++ b/arch/arm/mach-s3c6400/include/mach/map.h @@ -17,6 +17,18 @@ #include <plat/map-base.h> +/* + * Post-mux Chip Select Regions Xm0CSn_ + * These may be used by SROM, NAND or CF depending on settings + */ + +#define S3C64XX_PA_XM0CSN0 (0x10000000) +#define S3C64XX_PA_XM0CSN1 (0x18000000) +#define S3C64XX_PA_XM0CSN2 (0x20000000) +#define S3C64XX_PA_XM0CSN3 (0x28000000) +#define S3C64XX_PA_XM0CSN4 (0x30000000) +#define S3C64XX_PA_XM0CSN5 (0x38000000) + /* HSMMC units */ #define S3C64XX_PA_HSMMC(x) (0x7C200000 + ((x) * 0x100000)) #define S3C64XX_PA_HSMMC0 S3C64XX_PA_HSMMC(0) @@ -38,16 +50,22 @@ #define S3C_VA_UART2 S3C_VA_UARTx(2) #define S3C_VA_UART3 S3C_VA_UARTx(3) +#define S3C64XX_PA_SROM (0x70000000) + #define S3C64XX_PA_NAND (0x70200000) #define S3C64XX_PA_FB (0x77100000) #define S3C64XX_PA_USB_HSOTG (0x7C000000) #define S3C64XX_PA_WATCHDOG (0x7E004000) +#define S3C64XX_PA_RTC (0x7E005000) +#define S3C64XX_PA_ADC (0x7E00B000) #define S3C64XX_PA_SYSCON (0x7E00F000) #define S3C64XX_PA_AC97 (0x7F001000) #define S3C64XX_PA_IIS0 (0x7F002000) #define S3C64XX_PA_IIS1 (0x7F003000) #define S3C64XX_PA_TIMER (0x7F006000) #define S3C64XX_PA_IIC0 (0x7F004000) +#define S3C64XX_PA_SPI0 (0x7F00B000) +#define S3C64XX_PA_SPI1 (0x7F00C000) #define S3C64XX_PA_PCM0 (0x7F009000) #define S3C64XX_PA_PCM1 (0x7F00A000) #define S3C64XX_PA_IISV4 (0x7F00D000) @@ -70,8 +88,8 @@ #define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000) /* place VICs close together */ -#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x00) -#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000) +#define VA_VIC0 (S3C_VA_IRQ + 0x00) +#define VA_VIC1 (S3C_VA_IRQ + 0x10000) /* compatibiltiy defines. */ #define S3C_PA_TIMER S3C64XX_PA_TIMER diff --git a/arch/arm/mach-s3c6400/include/mach/tick.h b/arch/arm/mach-s3c6400/include/mach/tick.h index d9c0dc7014e..ebe18a9469b 100644 --- a/arch/arm/mach-s3c6400/include/mach/tick.h +++ b/arch/arm/mach-s3c6400/include/mach/tick.h @@ -20,7 +20,7 @@ */ static inline u32 s3c24xx_ostimer_pending(void) { - u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS); + u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0)); } diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c index 7619456f2ae..f05d95784d7 100644 --- a/arch/arm/mach-s3c6410/mach-hmt.c +++ b/arch/arm/mach-s3c6410/mach-hmt.c @@ -233,7 +233,7 @@ static struct platform_device *hmt_devices[] __initdata = { &s3c_device_i2c0, &s3c_device_nand, &s3c_device_fb, - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_timer[1], &hmt_backlight_device, &hmt_leds_device, diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 8969fe73b83..eba345fadff 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -49,6 +49,7 @@ #include <plat/regs-modem.h> #include <plat/regs-gpio.h> #include <plat/regs-sys.h> +#include <plat/regs-srom.h> #include <plat/iic.h> #include <plat/fb.h> #include <plat/gpio-cfg.h> @@ -154,10 +155,20 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = { .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, }; +/* + * Configuring Ethernet on SMDK6410 + * + * Both CS8900A and LAN9115 chips share one chip select mediated by CFG6. + * The constant address below corresponds to nCS1 + * + * 1) Set CFGB2 p3 ON others off, no other CFGB selects "ethernet" + * 2) CFG6 needs to be switched to "LAN9115" side + */ + static struct resource smdk6410_smsc911x_resources[] = { [0] = { - .start = 0x18000000, - .end = 0x18000000 + SZ_64K - 1, + .start = S3C64XX_PA_XM0CSN1, + .end = S3C64XX_PA_XM0CSN1 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -235,7 +246,7 @@ static struct platform_device *smdk6410_devices[] __initdata = { &s3c_device_i2c0, &s3c_device_i2c1, &s3c_device_fb, - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_usb_hsotg, #ifdef CONFIG_REGULATOR @@ -388,6 +399,7 @@ static int __init smdk6410_wm8350_init(struct wm8350 *wm8350) static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = { .init = smdk6410_wm8350_init, .irq_high = 1, + .irq_base = IRQ_BOARD_START, }; #endif @@ -430,10 +442,32 @@ static void __init smdk6410_map_io(void) static void __init smdk6410_machine_init(void) { + u32 cs1; + s3c_i2c0_set_platdata(NULL); s3c_i2c1_set_platdata(NULL); s3c_fb_set_platdata(&smdk6410_lcd_pdata); + /* configure nCS1 width to 16 bits */ + + cs1 = __raw_readl(S3C64XX_SROM_BW) & + ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT); + cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) | + (1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) | + (1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) << + S3C64XX_SROM_BW__NCS1__SHIFT; + __raw_writel(cs1, S3C64XX_SROM_BW); + + /* set timing for nCS1 suitable for ethernet chip */ + + __raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) | + (6 << S3C64XX_SROM_BCX__TACP__SHIFT) | + (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) | + (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) | + (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) | + (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) | + (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1); + gpio_request(S3C64XX_GPN(5), "LCD power"); gpio_request(S3C64XX_GPF(13), "LCD power"); gpio_request(S3C64XX_GPF(15), "LCD power"); diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig new file mode 100644 index 00000000000..3aa246244dc --- /dev/null +++ b/arch/arm/mach-s5p6440/Kconfig @@ -0,0 +1,23 @@ +# arch/arm/mach-s5p6440/Kconfig +# +# Copyright (c) 2009 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +if ARCH_S5P6440 + +config CPU_S5P6440 + bool + select CPU_S5P6440_INIT + select CPU_S5P6440_CLOCK + help + Enable S5P6440 CPU support + +config MACH_SMDK6440 + bool "SMDK6440" + select CPU_S5P6440 + help + Machine support for the Samsung SMDK6440 + +endif diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile new file mode 100644 index 00000000000..a79b13011ed --- /dev/null +++ b/arch/arm/mach-s5p6440/Makefile @@ -0,0 +1,19 @@ +# arch/arm/mach-s5p6440/Makefile +# +# Copyright (c) 2009 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +# Core support for S5P6440 system + +obj-$(CONFIG_CPU_S5P6440) += cpu.o s5p6440-gpio.o + +# machine support + +obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o diff --git a/arch/arm/mach-s5p6440/Makefile.boot b/arch/arm/mach-s5p6440/Makefile.boot new file mode 100644 index 00000000000..ff90aa13bd6 --- /dev/null +++ b/arch/arm/mach-s5p6440/Makefile.boot @@ -0,0 +1,2 @@ + zreladdr-y := 0x20008000 +params_phys-y := 0x20000100 diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c new file mode 100644 index 00000000000..1794131aeac --- /dev/null +++ b/arch/arm/mach-s5p6440/cpu.c @@ -0,0 +1,114 @@ +/* linux/arch/arm/mach-s5p6440/cpu.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/sysdev.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/proc-fns.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <asm/irq.h> + +#include <plat/regs-serial.h> +#include <mach/regs-clock.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/clock.h> +#include <plat/s5p6440.h> + +static void s5p6440_idle(void) +{ + unsigned long val; + + if (!need_resched()) { + val = __raw_readl(S5P_PWR_CFG); + val &= ~(0x3<<5); + val |= (0x1<<5); + __raw_writel(val, S5P_PWR_CFG); + + cpu_do_idle(); + } + local_irq_enable(); +} + +/* s5p6440_map_io + * + * register the standard cpu IO areas +*/ + +void __init s5p6440_map_io(void) +{ + /* initialize any device information early */ +} + +void __init s5p6440_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + + s3c24xx_register_baseclocks(xtal); + s5p_register_clocks(xtal); + s5p6440_register_clocks(); + s5p6440_setup_clocks(); +} + +void __init s5p6440_init_irq(void) +{ + /* S5P6440 supports only 2 VIC */ + u32 vic[2]; + + /* + * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)] + * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22] + */ + vic[0] = 0xff800ae7; + vic[1] = 0xffbf23e5; + + s5p_init_irq(vic, ARRAY_SIZE(vic)); +} + +static struct sysdev_class s5p6440_sysclass = { + .name = "s5p6440-core", +}; + +static struct sys_device s5p6440_sysdev = { + .cls = &s5p6440_sysclass, +}; + +static int __init s5p6440_core_init(void) +{ + return sysdev_class_register(&s5p6440_sysclass); +} + +core_initcall(s5p6440_core_init); + +int __init s5p6440_init(void) +{ + printk(KERN_INFO "S5P6440: Initializing architecture\n"); + + /* set idle function */ + pm_idle = s5p6440_idle; + + return sysdev_register(&s5p6440_sysdev); +} diff --git a/arch/arm/mach-s5p6440/include/mach/debug-macro.S b/arch/arm/mach-s5p6440/include/mach/debug-macro.S new file mode 100644 index 00000000000..f3a5d1635be --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/debug-macro.S @@ -0,0 +1,37 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/debug-macro.S + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* pull in the relevant register and map files. */ + +#include <mach/map.h> +#include <plat/regs-serial.h> + + /* note, for the boot process to work we have to keep the UART + * virtual address aligned to an 1MiB boundary for the L1 + * mapping the head code makes. We keep the UART virtual address + * aligned and add in the offset when we load the value here. + */ + + .macro addruart, rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 + ldreq \rx, = S5P_PA_UART + ldrne \rx, = (S5P_VA_UART + S5P_PA_UART & 0xfffff) +#if CONFIG_DEBUG_S3C_UART != 0 + add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) +#endif + .endm + +/* include the reset of the code which will do the work, we're only + * compiling for a single cpu processor type so the default of s3c2440 + * will be fine with us. + */ + +#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s5p6440/include/mach/entry-macro.S b/arch/arm/mach-s5p6440/include/mach/entry-macro.S new file mode 100644 index 00000000000..e65f1b96726 --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/entry-macro.S @@ -0,0 +1,16 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/entry-macro.S + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Low-level IRQ helper macros for the Samsung S5P6440 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <mach/map.h> +#include <plat/irqs.h> + +#include <asm/entry-macro-vic2.S> diff --git a/arch/arm/mach-s5p6440/include/mach/gpio.h b/arch/arm/mach-s5p6440/include/mach/gpio.h new file mode 100644 index 00000000000..21783834f2a --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/gpio.h @@ -0,0 +1,80 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/gpio.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - GPIO lib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H __FILE__ + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +/* GPIO bank sizes */ +#define S5P6440_GPIO_A_NR (6) +#define S5P6440_GPIO_B_NR (7) +#define S5P6440_GPIO_C_NR (8) +#define S5P6440_GPIO_F_NR (2) +#define S5P6440_GPIO_G_NR (7) +#define S5P6440_GPIO_H_NR (10) +#define S5P6440_GPIO_I_NR (16) +#define S5P6440_GPIO_J_NR (12) +#define S5P6440_GPIO_N_NR (16) +#define S5P6440_GPIO_P_NR (8) +#define S5P6440_GPIO_R_NR (15) + +/* GPIO bank numbers */ + +/* CONFIG_S3C_GPIO_SPACE allows the user to select extra + * space for debugging purposes so that any accidental + * change from one gpio bank to another can be caught. +*/ +#define S5P6440_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) + +enum s5p_gpio_number { + S5P6440_GPIO_A_START = 0, + S5P6440_GPIO_B_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_A), + S5P6440_GPIO_C_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_B), + S5P6440_GPIO_F_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_C), + S5P6440_GPIO_G_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_F), + S5P6440_GPIO_H_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_G), + S5P6440_GPIO_I_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_H), + S5P6440_GPIO_J_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_I), + S5P6440_GPIO_N_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_J), + S5P6440_GPIO_P_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_N), + S5P6440_GPIO_R_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_P), +}; + +/* S5P6440 GPIO number definitions. */ +#define S5P6440_GPA(_nr) (S5P6440_GPIO_A_START + (_nr)) +#define S5P6440_GPB(_nr) (S5P6440_GPIO_B_START + (_nr)) +#define S5P6440_GPC(_nr) (S5P6440_GPIO_C_START + (_nr)) +#define S5P6440_GPF(_nr) (S5P6440_GPIO_F_START + (_nr)) +#define S5P6440_GPG(_nr) (S5P6440_GPIO_G_START + (_nr)) +#define S5P6440_GPH(_nr) (S5P6440_GPIO_H_START + (_nr)) +#define S5P6440_GPI(_nr) (S5P6440_GPIO_I_START + (_nr)) +#define S5P6440_GPJ(_nr) (S5P6440_GPIO_J_START + (_nr)) +#define S5P6440_GPN(_nr) (S5P6440_GPIO_N_START + (_nr)) +#define S5P6440_GPP(_nr) (S5P6440_GPIO_P_START + (_nr)) +#define S5P6440_GPR(_nr) (S5P6440_GPIO_R_START + (_nr)) + +/* the end of the S5P6440 specific gpios */ +#define S5P6440_GPIO_END (S5P6440_GPR(S5P6440_GPIO_R_NR) + 1) +#define S3C_GPIO_END S5P6440_GPIO_END + +/* define the number of gpios we need to the one after the GPR() range */ +#define ARCH_NR_GPIOS (S5P6440_GPR(S5P6440_GPIO_R_NR) + \ + CONFIG_SAMSUNG_GPIO_EXTRA + 1) + +#include <asm-generic/gpio.h> + +#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/hardware.h b/arch/arm/mach-s5p6440/include/mach/hardware.h new file mode 100644 index 00000000000..be8b26e875d --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/hardware.h @@ -0,0 +1,18 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/hardware.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - Hardware support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H __FILE__ + +/* currently nothing here, placeholder */ + +#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/irqs.h b/arch/arm/mach-s5p6440/include/mach/irqs.h new file mode 100644 index 00000000000..a4b9b40d18f --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/irqs.h @@ -0,0 +1,111 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/irqs.h + * + * Copyright 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - IRQ definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_S5P_IRQS_H +#define __ASM_ARCH_S5P_IRQS_H __FILE__ + +#include <plat/irqs.h> + +/* VIC0 */ + +#define IRQ_EINT0_3 S5P_IRQ_VIC0(0) +#define IRQ_EINT4_11 S5P_IRQ_VIC0(1) +#define IRQ_RTC_TIC S5P_IRQ_VIC0(2) +#define IRQ_IIC1 S5P_IRQ_VIC0(5) +#define IRQ_I2SV40 S5P_IRQ_VIC0(6) +#define IRQ_GPS S5P_IRQ_VIC0(7) +#define IRQ_POST0 S5P_IRQ_VIC0(9) +#define IRQ_2D S5P_IRQ_VIC0(11) +#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(23) +#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(24) +#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(25) +#define IRQ_WDT S5P_IRQ_VIC0(26) +#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(27) +#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(28) +#define IRQ_DISPCON0 S5P_IRQ_VIC0(29) +#define IRQ_DISPCON1 S5P_IRQ_VIC0(30) +#define IRQ_DISPCON2 S5P_IRQ_VIC0(31) + +/* VIC1 */ + +#define IRQ_EINT12_15 S5P_IRQ_VIC1(0) +#define IRQ_PCM0 S5P_IRQ_VIC1(2) +#define IRQ_UART0 S5P_IRQ_VIC1(5) +#define IRQ_UART1 S5P_IRQ_VIC1(6) +#define IRQ_UART2 S5P_IRQ_VIC1(7) +#define IRQ_UART3 S5P_IRQ_VIC1(8) +#define IRQ_DMA0 S5P_IRQ_VIC1(9) +#define IRQ_NFC S5P_IRQ_VIC1(13) +#define IRQ_SPI0 S5P_IRQ_VIC1(16) +#define IRQ_SPI1 S5P_IRQ_VIC1(17) +#define IRQ_IIC S5P_IRQ_VIC1(18) +#define IRQ_DISPCON3 S5P_IRQ_VIC1(19) +#define IRQ_FIMGVG S5P_IRQ_VIC1(20) +#define IRQ_EINT_GROUPS S5P_IRQ_VIC1(21) +#define IRQ_PMUIRQ S5P_IRQ_VIC1(23) +#define IRQ_HSMMC0 S5P_IRQ_VIC1(24) +#define IRQ_HSMMC1 S5P_IRQ_VIC1(25) +#define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */ +#define IRQ_OTG S5P_IRQ_VIC1(26) +#define IRQ_DSI S5P_IRQ_VIC1(27) +#define IRQ_RTC_ALARM S5P_IRQ_VIC1(28) +#define IRQ_TSI S5P_IRQ_VIC1(29) +#define IRQ_PENDN S5P_IRQ_VIC1(30) +#define IRQ_TC IRQ_PENDN +#define IRQ_ADC S5P_IRQ_VIC1(31) + +/* + * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined + * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place + * after the pair of VICs. + */ + +#define S5P_IRQ_EINT_BASE (S5P_IRQ_VIC1(31) + 6) + +#define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE) +#define IRQ_EINT(x) S5P_EINT(x) + +/* + * Next the external interrupt groups. These are similar to the IRQ_EINT(x) + * that they are sourced from the GPIO pins but with a different scheme for + * priority and source indication. + * + * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO + * interrupts, but for historical reasons they are kept apart from these + * next interrupts. + * + * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the + * machine specific support files. + */ + +/* Actually, #6 and #7 are missing in the EINT_GROUP1 */ +#define IRQ_EINT_GROUP1_NR (15) +#define IRQ_EINT_GROUP2_NR (8) +#define IRQ_EINT_GROUP5_NR (7) +#define IRQ_EINT_GROUP6_NR (10) +/* Actually, #0, #1 and #2 are missing in the EINT_GROUP8 */ +#define IRQ_EINT_GROUP8_NR (11) + +#define IRQ_EINT_GROUP_BASE S5P_EINT(16) +#define IRQ_EINT_GROUP1_BASE (IRQ_EINT_GROUP_BASE + 0) +#define IRQ_EINT_GROUP2_BASE (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR) +#define IRQ_EINT_GROUP5_BASE (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR) +#define IRQ_EINT_GROUP6_BASE (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR) +#define IRQ_EINT_GROUP8_BASE (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR) + +#define IRQ_EINT_GROUP(grp, x) (IRQ_EINT_GROUP##grp##_BASE + (x)) + +/* Set the default NR_IRQS */ + +#define NR_IRQS (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1) + +#endif /* __ASM_ARCH_S5P_IRQS_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h new file mode 100644 index 00000000000..4a73e73c942 --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/map.h @@ -0,0 +1,107 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/map.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MAP_H +#define __ASM_ARCH_MAP_H __FILE__ + +#include <plat/map-base.h> + +/* Chip ID */ +#define S5P6440_PA_CHIPID (0xE0000000) +#define S5P_PA_CHIPID S5P6440_PA_CHIPID +#define S5P_VA_CHIPID S3C_ADDR(0x00700000) + +/* SYSCON */ +#define S5P6440_PA_SYSCON (0xE0100000) +#define S5P_PA_SYSCON S5P6440_PA_SYSCON +#define S5P_VA_SYSCON S3C_VA_SYS + +#define S5P6440_PA_CLK (S5P6440_PA_SYSCON + 0x0) +#define S5P_PA_CLK S5P6440_PA_CLK +#define S5P_VA_CLK (S5P_VA_SYSCON + 0x0) + +/* GPIO */ +#define S5P6440_PA_GPIO (0xE0308000) +#define S5P_PA_GPIO S5P6440_PA_GPIO +#define S5P_VA_GPIO S3C_ADDR(0x00500000) + +/* VIC0 */ +#define S5P6440_PA_VIC0 (0xE4000000) +#define S5P_PA_VIC0 S5P6440_PA_VIC0 +#define S5P_VA_VIC0 (S3C_VA_IRQ + 0x0) +#define VA_VIC0 S5P_VA_VIC0 + +/* VIC1 */ +#define S5P6440_PA_VIC1 (0xE4100000) +#define S5P_PA_VIC1 S5P6440_PA_VIC1 +#define S5P_VA_VIC1 (S3C_VA_IRQ + 0x10000) +#define VA_VIC1 S5P_VA_VIC1 + +/* Timer */ +#define S5P6440_PA_TIMER (0xEA000000) +#define S5P_PA_TIMER S5P6440_PA_TIMER +#define S5P_VA_TIMER S3C_VA_TIMER + +/* RTC */ +#define S5P6440_PA_RTC (0xEA100000) +#define S5P_PA_RTC S5P6440_PA_RTC +#define S5P_VA_RTC S3C_ADDR(0x00600000) + +/* WDT */ +#define S5P6440_PA_WDT (0xEA200000) +#define S5P_PA_WDT S5P6440_PA_WDT +#define S5p_VA_WDT S3C_VA_WATCHDOG + +/* UART */ +#define S5P6440_PA_UART (0xEC000000) +#define S5P_PA_UART S5P6440_PA_UART +#define S5P_VA_UART S3C_VA_UART + +/* HS USB OtG */ +#define S5P6440_PA_HSOTG (0xED100000) + +/* HSMMC */ +#define S5P6440_PA_HSMMC0 (0xED800000) +#define S5P6440_PA_HSMMC1 (0xED900000) +#define S5P6440_PA_HSMMC2 (0xEDA00000) + +#define S5P_PA_UART0 (S5P_PA_UART + 0x0) +#define S5P_PA_UART1 (S5P_PA_UART + 0x400) +#define S5P_PA_UART2 (S5P_PA_UART + 0x800) +#define S5P_PA_UART3 (S5P_PA_UART + 0xC00) +#define S5P_UART_OFFSET (0x400) + +#define S5P_VA_UARTx(x) (S5P_VA_UART + (S5P_PA_UART & 0xfffff) \ + + ((x) * S5P_UART_OFFSET)) + +#define S5P_VA_UART0 S5P_VA_UARTx(0) +#define S5P_VA_UART1 S5P_VA_UARTx(1) +#define S5P_VA_UART2 S5P_VA_UARTx(2) +#define S5P_VA_UART3 S5P_VA_UARTx(3) +#define S5P_SZ_UART SZ_256 + +/* I2C */ +#define S5P6440_PA_IIC0 (0xEC104000) +#define S5P_PA_IIC0 S5P6440_PA_IIC0 +#define S5p_VA_IIC0 S3C_ADDR(0x00700000) + +/* SDRAM */ +#define S5P6440_PA_SDRAM (0x20000000) +#define S5P_PA_SDRAM S5P6440_PA_SDRAM + +/* compatibiltiy defines. */ +#define S3C_PA_UART S5P_PA_UART +#define S3C_UART_OFFSET S5P_UART_OFFSET +#define S3C_PA_TIMER S5P_PA_TIMER +#define S3C_PA_IIC S5P_PA_IIC0 + +#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/memory.h b/arch/arm/mach-s5p6440/include/mach/memory.h new file mode 100644 index 00000000000..d62910c71b5 --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/memory.h @@ -0,0 +1,19 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/memory.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - Memory definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PHYS_OFFSET UL(0x20000000) +#define CONSISTENT_DMA_SIZE SZ_8M + +#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/pwm-clock.h b/arch/arm/mach-s5p6440/include/mach/pwm-clock.h new file mode 100644 index 00000000000..c4bb7c55547 --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/pwm-clock.h @@ -0,0 +1,62 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/pwm-clock.h + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Copyright 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - pwm clock and timer support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/** + * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk + * @cfg: The timer TCFG1 register bits shifted down to 0. + * + * Return true if the given configuration from TCFG1 is a TCLK instead + * any of the TDIV clocks. + */ +static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) +{ + return tcfg == S3C2410_TCFG1_MUX_TCLK; +} + +/** + * tcfg_to_divisor() - convert tcfg1 setting to a divisor + * @tcfg1: The tcfg1 setting, shifted down. + * + * Get the divisor value for the given tcfg1 setting. We assume the + * caller has already checked to see if this is not a TCLK source. + */ +static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) +{ + return 1 << (1 + tcfg1); +} + +/** + * pwm_tdiv_has_div1() - does the tdiv setting have a /1 + * + * Return true if we have a /1 in the tdiv setting. + */ +static inline unsigned int pwm_tdiv_has_div1(void) +{ + return 0; +} + +/** + * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. + * @div: The divisor to calculate the bit information for. + * + * Turn a divisor into the necessary bit field for TCFG1. + */ +static inline unsigned long pwm_tdiv_div_bits(unsigned int div) +{ + return ilog2(div) - 1; +} + +#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK diff --git a/arch/arm/mach-s5p6440/include/mach/regs-clock.h b/arch/arm/mach-s5p6440/include/mach/regs-clock.h new file mode 100644 index 00000000000..b7af28342bc --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/regs-clock.h @@ -0,0 +1,130 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/regs-clock.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - Clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_CLOCK_H +#define __ASM_ARCH_REGS_CLOCK_H __FILE__ + +#include <mach/map.h> + +#define S5P_CLKREG(x) (S5P_VA_CLK + (x)) + +#define S5P_APLL_LOCK S5P_CLKREG(0x00) +#define S5P_MPLL_LOCK S5P_CLKREG(0x04) +#define S5P_EPLL_LOCK S5P_CLKREG(0x08) +#define S5P_APLL_CON S5P_CLKREG(0x0C) +#define S5P_MPLL_CON S5P_CLKREG(0x10) +#define S5P_EPLL_CON S5P_CLKREG(0x14) +#define S5P_EPLL_CON_K S5P_CLKREG(0x18) +#define S5P_CLK_SRC0 S5P_CLKREG(0x1C) +#define S5P_CLK_DIV0 S5P_CLKREG(0x20) +#define S5P_CLK_DIV1 S5P_CLKREG(0x24) +#define S5P_CLK_DIV2 S5P_CLKREG(0x28) +#define S5P_CLK_OUT S5P_CLKREG(0x2C) +#define S5P_CLK_GATE_HCLK0 S5P_CLKREG(0x30) +#define S5P_CLK_GATE_PCLK S5P_CLKREG(0x34) +#define S5P_CLK_GATE_SCLK0 S5P_CLKREG(0x38) +#define S5P_CLK_GATE_MEM0 S5P_CLKREG(0x3C) +#define S5P_CLK_DIV3 S5P_CLKREG(0x40) +#define S5P_CLK_GATE_HCLK1 S5P_CLKREG(0x44) +#define S5P_CLK_GATE_SCLK1 S5P_CLKREG(0x48) +#define S5P_AHB_CON0 S5P_CLKREG(0x100) +#define S5P_CLK_SRC1 S5P_CLKREG(0x10C) +#define S5P_SWRESET S5P_CLKREG(0x114) +#define S5P_SYS_ID S5P_CLKREG(0x118) +#define S5P_SYS_OTHERS S5P_CLKREG(0x11C) +#define S5P_MEM_CFG_STAT S5P_CLKREG(0x12C) +#define S5P_PWR_CFG S5P_CLKREG(0x804) +#define S5P_EINT_WAKEUP_MASK S5P_CLKREG(0x808) +#define S5P_NORMAL_CFG S5P_CLKREG(0x810) +#define S5P_STOP_CFG S5P_CLKREG(0x814) +#define S5P_SLEEP_CFG S5P_CLKREG(0x818) +#define S5P_OSC_FREQ S5P_CLKREG(0x820) +#define S5P_OSC_STABLE S5P_CLKREG(0x824) +#define S5P_PWR_STABLE S5P_CLKREG(0x828) +#define S5P_MTC_STABLE S5P_CLKREG(0x830) +#define S5P_OTHERS S5P_CLKREG(0x900) +#define S5P_RST_STAT S5P_CLKREG(0x904) +#define S5P_WAKEUP_STAT S5P_CLKREG(0x908) +#define S5P_SLPEN S5P_CLKREG(0x930) +#define S5P_INFORM0 S5P_CLKREG(0xA00) +#define S5P_INFORM1 S5P_CLKREG(0xA04) +#define S5P_INFORM2 S5P_CLKREG(0xA08) +#define S5P_INFORM3 S5P_CLKREG(0xA0C) + +/* CLKDIV0 */ +#define S5P_CLKDIV0_PCLK_MASK (0xf << 12) +#define S5P_CLKDIV0_PCLK_SHIFT (12) +#define S5P_CLKDIV0_HCLK_MASK (0xf << 8) +#define S5P_CLKDIV0_HCLK_SHIFT (8) +#define S5P_CLKDIV0_MPLL_MASK (0x1 << 4) +#define S5P_CLKDIV0_ARM_MASK (0xf << 0) +#define S5P_CLKDIV0_ARM_SHIFT (0) + +/* CLKDIV3 */ +#define S5P_CLKDIV3_PCLK_LOW_MASK (0xf << 12) +#define S5P_CLKDIV3_PCLK_LOW_SHIFT (12) +#define S5P_CLKDIV3_HCLK_LOW_MASK (0xf << 8) +#define S5P_CLKDIV3_HCLK_LOW_SHIFT (8) + +/* HCLK0 GATE Registers */ +#define S5P_CLKCON_HCLK0_USB (1<<20) +#define S5P_CLKCON_HCLK0_HSMMC2 (1<<19) +#define S5P_CLKCON_HCLK0_HSMMC1 (1<<18) +#define S5P_CLKCON_HCLK0_HSMMC0 (1<<17) +#define S5P_CLKCON_HCLK0_POST0 (1<<5) + +/* HCLK1 GATE Registers */ +#define S5P_CLKCON_HCLK1_DISPCON (1<<1) + +/* PCLK GATE Registers */ +#define S5P_CLKCON_PCLK_IIS2 (1<<26) +#define S5P_CLKCON_PCLK_SPI1 (1<<22) +#define S5P_CLKCON_PCLK_SPI0 (1<<21) +#define S5P_CLKCON_PCLK_GPIO (1<<18) +#define S5P_CLKCON_PCLK_IIC0 (1<<17) +#define S5P_CLKCON_PCLK_TSADC (1<<12) +#define S5P_CLKCON_PCLK_PWM (1<<7) +#define S5P_CLKCON_PCLK_RTC (1<<6) +#define S5P_CLKCON_PCLK_WDT (1<<5) +#define S5P_CLKCON_PCLK_UART3 (1<<4) +#define S5P_CLKCON_PCLK_UART2 (1<<3) +#define S5P_CLKCON_PCLK_UART1 (1<<2) +#define S5P_CLKCON_PCLK_UART0 (1<<1) + +/* SCLK0 GATE Registers */ +#define S5P_CLKCON_SCLK0_MMC2_48 (1<<29) +#define S5P_CLKCON_SCLK0_MMC1_48 (1<<28) +#define S5P_CLKCON_SCLK0_MMC0_48 (1<<27) +#define S5P_CLKCON_SCLK0_MMC2 (1<<26) +#define S5P_CLKCON_SCLK0_MMC1 (1<<25) +#define S5P_CLKCON_SCLK0_MMC0 (1<<24) +#define S5P_CLKCON_SCLK0_SPI1_48 (1<<23) +#define S5P_CLKCON_SCLK0_SPI0_48 (1<<22) +#define S5P_CLKCON_SCLK0_SPI1 (1<<21) +#define S5P_CLKCON_SCLK0_SPI0 (1<<20) +#define S5P_CLKCON_SCLK0_UART (1<<5) + +/* SCLK1 GATE Registers */ + +/* MEM0 GATE Registers */ +#define S5P_CLKCON_MEM0_HCLK_NFCON (1<<2) + +/*OTHERS Resgister */ +#define S5P_OTHERS_USB_SIG_MASK (1<<16) +#define S5P_OTHERS_HCLK_LOW_SEL_MPLL (1<<6) + +/* Compatibility defines */ +#define ARM_CLK_DIV S5P_CLK_DIV0 +#define ARM_DIV_RATIO_SHIFT 0 +#define ARM_DIV_MASK (0xf << ARM_DIV_RATIO_SHIFT) + +#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/regs-gpio.h b/arch/arm/mach-s5p6440/include/mach/regs-gpio.h new file mode 100644 index 00000000000..82ff753913d --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/regs-gpio.h @@ -0,0 +1,54 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/regs-gpio.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - GPIO register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_REGS_GPIO_H +#define __ASM_ARCH_REGS_GPIO_H __FILE__ + +#include <mach/map.h> + +/* Base addresses for each of the banks */ +#define S5P6440_GPA_BASE (S5P_VA_GPIO + 0x0000) +#define S5P6440_GPB_BASE (S5P_VA_GPIO + 0x0020) +#define S5P6440_GPC_BASE (S5P_VA_GPIO + 0x0040) +#define S5P6440_GPF_BASE (S5P_VA_GPIO + 0x00A0) +#define S5P6440_GPG_BASE (S5P_VA_GPIO + 0x00C0) +#define S5P6440_GPH_BASE (S5P_VA_GPIO + 0x00E0) +#define S5P6440_GPI_BASE (S5P_VA_GPIO + 0x0100) +#define S5P6440_GPJ_BASE (S5P_VA_GPIO + 0x0120) +#define S5P6440_GPN_BASE (S5P_VA_GPIO + 0x0830) +#define S5P6440_GPP_BASE (S5P_VA_GPIO + 0x0160) +#define S5P6440_GPR_BASE (S5P_VA_GPIO + 0x0290) +#define S5P6440_EINT0CON0 (S5P_VA_GPIO + 0x900) +#define S5P6440_EINT0FLTCON0 (S5P_VA_GPIO + 0x910) +#define S5P6440_EINT0FLTCON1 (S5P_VA_GPIO + 0x914) +#define S5P6440_EINT0MASK (S5P_VA_GPIO + 0x920) +#define S5P6440_EINT0PEND (S5P_VA_GPIO + 0x924) + +/* for LCD */ +#define S5P6440_SPCON_LCD_SEL_RGB (1 << 0) +#define S5P6440_SPCON_LCD_SEL_MASK (3 << 0) + +/* These set of macros are not really useful for the + * GPF/GPI/GPJ/GPN/GPP, + * useful for others set of GPIO's (4 bit) + */ +#define S5P6440_GPIO_CONMASK(__gpio) (0xf << ((__gpio) * 4)) +#define S5P6440_GPIO_INPUT(__gpio) (0x0 << ((__gpio) * 4)) +#define S5P6440_GPIO_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) + +/* Use these macros for GPF/GPI/GPJ/GPN/GPP set of GPIO (2 bit) + * */ +#define S5P6440_GPIO2_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) +#define S5P6440_GPIO2_INPUT(__gpio) (0x0 << ((__gpio) * 2)) +#define S5P6440_GPIO2_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) + +#endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/regs-irq.h b/arch/arm/mach-s5p6440/include/mach/regs-irq.h new file mode 100644 index 00000000000..a961f4beeb0 --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/regs-irq.h @@ -0,0 +1,19 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/regs-irq.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - IRQ register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_IRQ_H +#define __ASM_ARCH_REGS_IRQ_H __FILE__ + +#include <asm/hardware/vic.h> +#include <mach/map.h> + +#endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/system.h b/arch/arm/mach-s5p6440/include/mach/system.h new file mode 100644 index 00000000000..d2dd817da66 --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/system.h @@ -0,0 +1,26 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/system.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - system support header + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H __FILE__ + +static void arch_idle(void) +{ + /* nothing here yet */ +} + +static void arch_reset(char mode, const char *cmd) +{ + /* nothing here yet */ +} + +#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/tick.h b/arch/arm/mach-s5p6440/include/mach/tick.h new file mode 100644 index 00000000000..0815aeb4f2c --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/tick.h @@ -0,0 +1,24 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/tick.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - Timer tick support definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_TICK_H +#define __ASM_ARCH_TICK_H __FILE__ + +static inline u32 s3c24xx_ostimer_pending(void) +{ + u32 pend = __raw_readl(S5P_VA_VIC0 + VIC_RAW_STATUS); + return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0))); +} + +#define TICK_MAX (0xffffffff) + +#endif /* __ASM_ARCH_TICK_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/uncompress.h b/arch/arm/mach-s5p6440/include/mach/uncompress.h new file mode 100644 index 00000000000..7c1f600d65c --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/uncompress.h @@ -0,0 +1,24 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/uncompress.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - uncompress code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include <mach/map.h> +#include <plat/uncompress.h> + +static void arch_detect_cpu(void) +{ + /* we do not need to do any cpu detection here at the moment. */ +} + +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p6440/mach-smdk6440.c new file mode 100644 index 00000000000..760ea5424a7 --- /dev/null +++ b/arch/arm/mach-s5p6440/mach-smdk6440.c @@ -0,0 +1,111 @@ +/* linux/arch/arm/mach-s5p6440/mach-smdk6440.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/clk.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/map.h> + +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <plat/regs-serial.h> + +#include <plat/s5p6440.h> +#include <plat/clock.h> +#include <mach/regs-clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/pll.h> + +#define S5P6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define S5P6440_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define S5P6440_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S3C2440_UFCON_TXTRIG16 | \ + S3C2410_UFCON_RXTRIG8) + +static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = S5P6440_UCON_DEFAULT, + .ulcon = S5P6440_ULCON_DEFAULT, + .ufcon = S5P6440_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = S5P6440_UCON_DEFAULT, + .ulcon = S5P6440_ULCON_DEFAULT, + .ufcon = S5P6440_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = S5P6440_UCON_DEFAULT, + .ulcon = S5P6440_ULCON_DEFAULT, + .ufcon = S5P6440_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = S5P6440_UCON_DEFAULT, + .ulcon = S5P6440_ULCON_DEFAULT, + .ufcon = S5P6440_UFCON_DEFAULT, + }, +}; + +static struct platform_device *smdk6440_devices[] __initdata = { +}; + +static void __init smdk6440_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_SYS_ID); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs)); +} + +static void __init smdk6440_machine_init(void) +{ + platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices)); +} + +MACHINE_START(SMDK6440, "SMDK6440") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .phys_io = S5P_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S5P_VA_UART) >> 18) & 0xfffc, + .boot_params = S5P_PA_SDRAM + 0x100, + + .init_irq = s5p6440_init_irq, + .map_io = smdk6440_map_io, + .init_machine = smdk6440_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s5p6440/s5p6440-gpio.c b/arch/arm/mach-s5p6440/s5p6440-gpio.c new file mode 100644 index 00000000000..742264c29f2 --- /dev/null +++ b/arch/arm/mach-s5p6440/s5p6440-gpio.c @@ -0,0 +1,322 @@ +/* arch/arm/mach-s5p6440/s5p6440-gpio.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <mach/map.h> +#include <mach/gpio.h> +#include <mach/regs-gpio.h> +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> + +/* GPIO bank summary: +* +* Bank GPIOs Style SlpCon ExtInt Group +* A 6 4Bit Yes 1 +* B 7 4Bit Yes 1 +* C 8 4Bit Yes 2 +* F 2 2Bit Yes 4 [1] +* G 7 4Bit Yes 5 +* H 10 4Bit[2] Yes 6 +* I 16 2Bit Yes None +* J 12 2Bit Yes None +* N 16 2Bit No IRQ_EINT +* P 8 2Bit Yes 8 +* R 15 4Bit[2] Yes 8 +* +* [1] BANKF pins 14,15 do not form part of the external interrupt sources +* [2] BANK has two control registers, GPxCON0 and GPxCON1 +*/ + +static int s5p6440_gpiolib_rbank_4bit2_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + + switch (offset) { + case 6: + offset += 1; + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + regcon -= 4; + break; + default: + offset -= 7; + break; + } + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, regcon); + + return 0; +} + +static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + unsigned long dat; + unsigned con_offset = offset; + + switch (con_offset) { + case 6: + con_offset += 1; + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + regcon -= 4; + break; + default: + con_offset -= 7; + break; + } + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(con_offset)); + con |= 0x1 << con_4bit_shift(con_offset); + + dat = __raw_readl(base + GPIODAT_OFF); + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(con, regcon); + __raw_writel(dat, base + GPIODAT_OFF); + + return 0; +} + +int s5p6440_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift; + u32 con; + + switch (off) { + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + shift = (off & 7) * 4; + reg -= 4; + break; + case 6: + shift = ((off + 1) & 7) * 4; + reg -= 4; + default: + shift = ((off + 1) & 7) * 4; + break; + } + + if (s3c_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0xf << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +static struct s3c_gpio_cfg s5p6440_gpio_cfgs[] = { + { + .cfg_eint = 0, + }, { + .cfg_eint = 7, + }, { + .cfg_eint = 3, + .set_config = s5p6440_gpio_setcfg_4bit_rbank, + }, { + .cfg_eint = 0, + .set_config = s3c_gpio_setcfg_s3c24xx, + }, { + .cfg_eint = 2, + .set_config = s3c_gpio_setcfg_s3c24xx, + }, { + .cfg_eint = 3, + .set_config = s3c_gpio_setcfg_s3c24xx, + }, +}; + +static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { + { + .base = S5P6440_GPA_BASE, + .config = &s5p6440_gpio_cfgs[1], + .chip = { + .base = S5P6440_GPA(0), + .ngpio = S5P6440_GPIO_A_NR, + .label = "GPA", + }, + }, { + .base = S5P6440_GPB_BASE, + .config = &s5p6440_gpio_cfgs[1], + .chip = { + .base = S5P6440_GPB(0), + .ngpio = S5P6440_GPIO_B_NR, + .label = "GPB", + }, + }, { + .base = S5P6440_GPC_BASE, + .config = &s5p6440_gpio_cfgs[1], + .chip = { + .base = S5P6440_GPC(0), + .ngpio = S5P6440_GPIO_C_NR, + .label = "GPC", + }, + }, { + .base = S5P6440_GPG_BASE, + .config = &s5p6440_gpio_cfgs[1], + .chip = { + .base = S5P6440_GPG(0), + .ngpio = S5P6440_GPIO_G_NR, + .label = "GPG", + }, + }, +}; + +static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = { + { + .base = S5P6440_GPH_BASE + 0x4, + .config = &s5p6440_gpio_cfgs[1], + .chip = { + .base = S5P6440_GPH(0), + .ngpio = S5P6440_GPIO_H_NR, + .label = "GPH", + }, + }, +}; + +static struct s3c_gpio_chip gpio_rbank_4bit2[] = { + { + .base = S5P6440_GPR_BASE + 0x4, + .config = &s5p6440_gpio_cfgs[2], + .chip = { + .base = S5P6440_GPR(0), + .ngpio = S5P6440_GPIO_R_NR, + .label = "GPR", + }, + }, +}; + +static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { + { + .base = S5P6440_GPF_BASE, + .config = &s5p6440_gpio_cfgs[5], + .chip = { + .base = S5P6440_GPF(0), + .ngpio = S5P6440_GPIO_F_NR, + .label = "GPF", + }, + }, { + .base = S5P6440_GPI_BASE, + .config = &s5p6440_gpio_cfgs[3], + .chip = { + .base = S5P6440_GPI(0), + .ngpio = S5P6440_GPIO_I_NR, + .label = "GPI", + }, + }, { + .base = S5P6440_GPJ_BASE, + .config = &s5p6440_gpio_cfgs[3], + .chip = { + .base = S5P6440_GPJ(0), + .ngpio = S5P6440_GPIO_J_NR, + .label = "GPJ", + }, + }, { + .base = S5P6440_GPN_BASE, + .config = &s5p6440_gpio_cfgs[4], + .chip = { + .base = S5P6440_GPN(0), + .ngpio = S5P6440_GPIO_N_NR, + .label = "GPN", + }, + }, { + .base = S5P6440_GPP_BASE, + .config = &s5p6440_gpio_cfgs[5], + .chip = { + .base = S5P6440_GPP(0), + .ngpio = S5P6440_GPIO_P_NR, + .label = "GPP", + }, + }, +}; + +void __init s5p6440_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chipcfg++) { + if (!chipcfg->set_config) + chipcfg->set_config = s3c_gpio_setcfg_s3c64xx_4bit; + if (!chipcfg->set_pull) + chipcfg->set_pull = s3c_gpio_setpull_updown; + if (!chipcfg->get_pull) + chipcfg->get_pull = s3c_gpio_getpull_updown; + } +} + +static void __init s5p6440_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) { + chip->chip.direction_input = s5p6440_gpiolib_rbank_4bit2_input; + chip->chip.direction_output = + s5p6440_gpiolib_rbank_4bit2_output; + s3c_gpiolib_add(chip); + } +} + +static int __init s5p6440_gpiolib_init(void) +{ + struct s3c_gpio_chip *chips = s5p6440_gpio_2bit; + int nr_chips = ARRAY_SIZE(s5p6440_gpio_2bit); + + s5p6440_gpiolib_set_cfg(s5p6440_gpio_cfgs, + ARRAY_SIZE(s5p6440_gpio_cfgs)); + + for (; nr_chips > 0; nr_chips--, chips++) + s3c_gpiolib_add(chips); + + samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit, + ARRAY_SIZE(s5p6440_gpio_4bit)); + + samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2, + ARRAY_SIZE(s5p6440_gpio_4bit2)); + + s5p6440_gpio_add_rbank_4bit2(gpio_rbank_4bit2, + ARRAY_SIZE(gpio_rbank_4bit2)); + + return 0; +} +arch_initcall(s5p6440_gpiolib_init); diff --git a/arch/arm/mach-s5pc100/include/mach/gpio-core.h b/arch/arm/mach-s5pc100/include/mach/gpio-core.h deleted file mode 100644 index ad28d8ec8a7..00000000000 --- a/arch/arm/mach-s5pc100/include/mach/gpio-core.h +++ /dev/null @@ -1,21 +0,0 @@ -/* arch/arm/mach-s5pc100/include/mach/gpio-core.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC100 - GPIO core support - * - * Based on mach-s3c6400/include/mach/gpio-core.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_CORE_H -#define __ASM_ARCH_GPIO_CORE_H __FILE__ - -/* currently we just include the platform support */ -#include <plat/gpio-core.h> - -#endif /* __ASM_ARCH_GPIO_CORE_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h index d3de0f3591a..f338c9eec71 100644 --- a/arch/arm/mach-s5pc100/include/mach/tick.h +++ b/arch/arm/mach-s5pc100/include/mach/tick.h @@ -21,7 +21,7 @@ static inline u32 s3c24xx_ostimer_pending(void) { u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS); - return pend & 1 << (IRQ_TIMER4 - S5PC1XX_IRQ_VIC0(0)); + return pend & 1 << (IRQ_TIMER4_VIC - S5PC1XX_IRQ_VIC0(0)); } #define TICK_MAX (0xffffffff) diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig index 9e9d0286e48..2367908c4f6 100644 --- a/arch/arm/plat-s3c/Kconfig +++ b/arch/arm/plat-s3c/Kconfig @@ -59,50 +59,6 @@ config S3C_BOOT_UART_FORCE_FIFO Say Y here to force the UART FIFOs on during the kernel uncompressor -comment "Power management" - -config S3C2410_PM_DEBUG - bool "S3C2410 PM Suspend debug" - depends on PM - help - Say Y here if you want verbose debugging from the PM Suspend and - Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> - for more information. - -config S3C_PM_DEBUG_LED_SMDK - bool "SMDK LED suspend/resume debugging" - depends on PM && (MACH_SMDK6410) - help - Say Y here to enable the use of the SMDK LEDs on the baseboard - for debugging of the state of the suspend and resume process. - - Note, this currently only works for S3C64XX based SMDK boards. - -config S3C2410_PM_CHECK - bool "S3C2410 PM Suspend Memory CRC" - depends on PM && CRC32 - help - Enable the PM code's memory area checksum over sleep. This option - will generate CRCs of all blocks of memory, and store them before - going to sleep. The blocks are then checked on resume for any - errors. - - Note, this can take several seconds depending on memory size - and CPU speed. - - See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> - -config S3C2410_PM_CHECK_CHUNKSIZE - int "S3C2410 PM Suspend CRC Chunksize (KiB)" - depends on PM && S3C2410_PM_CHECK - default 64 - help - Set the chunksize in Kilobytes of the CRC for checking memory - corruption over suspend and resume. A smaller value will mean that - the CRC data block will take more memory, but wil identify any - faults with better precision. - - See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> config S3C_LOWLEVEL_UART_PORT int "S3C UART to use for low-level messages" @@ -130,39 +86,6 @@ config S3C_GPIO_TRACK Internal configuration option to enable the s3c specific gpio chip tracking if the platform requires it. -config S3C_GPIO_PULL_UPDOWN - bool - help - Internal configuration to enable the correct GPIO pull helper - -config S3C_GPIO_PULL_DOWN - bool - help - Internal configuration to enable the correct GPIO pull helper - -config S3C_GPIO_PULL_UP - bool - help - Internal configuration to enable the correct GPIO pull helper - -config S3C_GPIO_CFG_S3C24XX - bool - help - Internal configuration to enable S3C24XX style GPIO configuration - functions. - -config S3C_GPIO_CFG_S3C64XX - bool - help - Internal configuration to enable S3C64XX style GPIO configuration - functions. - -config S5P_GPIO_CFG_S5PC1XX - bool - help - Internal configuration to enable S5PC1XX style GPIO configuration - functions. - # DMA config S3C_DMA @@ -170,46 +93,4 @@ config S3C_DMA help Internal configuration for S3C DMA core -# device definitions to compile in - -config S3C_DEV_HSMMC - bool - help - Compile in platform device definitions for HSMMC code - -config S3C_DEV_HSMMC1 - bool - help - Compile in platform device definitions for HSMMC channel 1 - -config S3C_DEV_HSMMC2 - bool - help - Compile in platform device definitions for HSMMC channel 2 - -config S3C_DEV_I2C1 - bool - help - Compile in platform device definitions for I2C channel 1 - -config S3C_DEV_FB - bool - help - Compile in platform device definition for framebuffer - -config S3C_DEV_USB_HOST - bool - help - Compile in platform device definition for USB host. - -config S3C_DEV_USB_HSOTG - bool - help - Compile in platform device definition for USB high-speed OtG - -config S3C_DEV_NAND - bool - help - Compile in platform device definition for NAND controller - endif diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index 50444da9842..89dbdb0adeb 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -11,12 +11,8 @@ obj- := # Core support for all Samsung SoCs -obj-y += init.o +obj-y += init.o obj-y += time.o -obj-y += clock.o -obj-y += pwm-clock.o -obj-y += gpio.o -obj-y += gpio-config.o # DMA support @@ -25,21 +21,3 @@ obj-$(CONFIG_S3C_DMA) += dma.o # PM support obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_PM) += pm-gpio.o -obj-$(CONFIG_S3C2410_PM_CHECK) += pm-check.o - -# PWM support - -obj-$(CONFIG_HAVE_PWM) += pwm.o - -# devices - -obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o -obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o -obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o -obj-y += dev-i2c0.o -obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o -obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o -obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o -obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o -obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h index d1131ca11e9..676db946567 100644 --- a/arch/arm/plat-s3c/include/plat/cpu.h +++ b/arch/arm/plat-s3c/include/plat/cpu.h @@ -48,9 +48,12 @@ extern void s3c_init_cpu(unsigned long idcode, extern void s3c24xx_init_irq(void); extern void s3c64xx_init_irq(u32 vic0, u32 vic1); +extern void s5p_init_irq(u32 *vic, u32 num_vic); extern void s3c24xx_init_io(struct map_desc *mach_desc, int size); extern void s3c64xx_init_io(struct map_desc *mach_desc, int size); +extern void s5p_init_io(struct map_desc *mach_desc, + int size, void __iomem *cpuid_addr); extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no); diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h index c1c20b02391..c6f9b731049 100644 --- a/arch/arm/plat-s3c/include/plat/devs.h +++ b/arch/arm/plat-s3c/include/plat/devs.h @@ -18,6 +18,7 @@ struct s3c24xx_uart_resources { extern struct s3c24xx_uart_resources s3c2410_uart_resources[]; extern struct s3c24xx_uart_resources s3c64xx_uart_resources[]; +extern struct s3c24xx_uart_resources s5p_uart_resources[]; extern struct platform_device *s3c24xx_uart_devs[]; extern struct platform_device *s3c24xx_uart_src[]; @@ -28,12 +29,15 @@ extern struct platform_device s3c64xx_device_iis0; extern struct platform_device s3c64xx_device_iis1; extern struct platform_device s3c64xx_device_iisv4; +extern struct platform_device s3c64xx_device_spi0; +extern struct platform_device s3c64xx_device_spi1; + extern struct platform_device s3c64xx_device_pcm0; extern struct platform_device s3c64xx_device_pcm1; extern struct platform_device s3c_device_ts; extern struct platform_device s3c_device_fb; -extern struct platform_device s3c_device_usb; +extern struct platform_device s3c_device_ohci; extern struct platform_device s3c_device_lcd; extern struct platform_device s3c_device_wdt; extern struct platform_device s3c_device_i2c0; diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h index 7a797192fcf..2543bd227f2 100644 --- a/arch/arm/plat-s3c/include/plat/pm.h +++ b/arch/arm/plat-s3c/include/plat/pm.h @@ -111,7 +111,7 @@ extern int s3c24xx_irq_resume(struct sys_device *dev); /* PM debug functions */ -#ifdef CONFIG_S3C2410_PM_DEBUG +#ifdef CONFIG_SAMSUNG_PM_DEBUG /** * s3c_pm_dbg() - low level debug function for use in suspend/resume. * @msg: The message to print. @@ -141,7 +141,7 @@ static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { } /* suspend memory checking */ -#ifdef CONFIG_S3C2410_PM_CHECK +#ifdef CONFIG_SAMSUNG_PM_CHECK extern void s3c_pm_check_prepare(void); extern void s3c_pm_check_restore(void); extern void s3c_pm_check_cleanup(void); diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h index 85d8904e7f2..60d6604185e 100644 --- a/arch/arm/plat-s3c/include/plat/regs-serial.h +++ b/arch/arm/plat-s3c/include/plat/regs-serial.h @@ -194,6 +194,36 @@ #define S3C64XX_UINTSP 0x34 #define S3C64XX_UINTM 0x38 +/* Following are specific to S5PV210 and S5P6442 */ +#define S5PV210_UCON_CLKMASK (1<<10) +#define S5PV210_UCON_PCLK (0<<10) +#define S5PV210_UCON_UCLK (1<<10) + +#define S5PV210_UFCON_TXTRIG0 (0<<8) +#define S5PV210_UFCON_TXTRIG4 (1<<8) +#define S5PV210_UFCON_TXTRIG8 (2<<8) +#define S5PV210_UFCON_TXTRIG16 (3<<8) +#define S5PV210_UFCON_TXTRIG32 (4<<8) +#define S5PV210_UFCON_TXTRIG64 (5<<8) +#define S5PV210_UFCON_TXTRIG128 (6<<8) +#define S5PV210_UFCON_TXTRIG256 (7<<8) + +#define S5PV210_UFCON_RXTRIG1 (0<<4) +#define S5PV210_UFCON_RXTRIG4 (1<<4) +#define S5PV210_UFCON_RXTRIG8 (2<<4) +#define S5PV210_UFCON_RXTRIG16 (3<<4) +#define S5PV210_UFCON_RXTRIG32 (4<<4) +#define S5PV210_UFCON_RXTRIG64 (5<<4) +#define S5PV210_UFCON_RXTRIG128 (6<<4) +#define S5PV210_UFCON_RXTRIG256 (7<<4) + +#define S5PV210_UFSTAT_TXFULL (1<<24) +#define S5PV210_UFSTAT_RXFULL (1<<8) +#define S5PV210_UFSTAT_TXMASK (255<<16) +#define S5PV210_UFSTAT_TXSHIFT (16) +#define S5PV210_UFSTAT_RXMASK (255<<0) +#define S5PV210_UFSTAT_RXSHIFT (0) + #ifndef __ASSEMBLY__ /* struct s3c24xx_uart_clksrc diff --git a/arch/arm/plat-s3c/include/plat/usb-control.h b/arch/arm/plat-s3c/include/plat/usb-control.h index 822c87fe948..a6a57bf796b 100644 --- a/arch/arm/plat-s3c/include/plat/usb-control.h +++ b/arch/arm/plat-s3c/include/plat/usb-control.h @@ -38,4 +38,6 @@ static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int port } } +extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info); + #endif /*__ASM_ARCH_USBCONTROL_H */ diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c index 767470601e5..e5eef126791 100644 --- a/arch/arm/plat-s3c/pm.c +++ b/arch/arm/plat-s3c/pm.c @@ -41,7 +41,7 @@ unsigned long s3c_pm_flags; * resume before the console layer is available. */ -#ifdef CONFIG_S3C2410_PM_DEBUG +#ifdef CONFIG_SAMSUNG_PM_DEBUG extern void printascii(const char *); void s3c_pm_dbg(const char *fmt, ...) @@ -65,13 +65,13 @@ static inline void s3c_pm_debug_init(void) #else #define s3c_pm_debug_init() do { } while(0) -#endif /* CONFIG_S3C2410_PM_DEBUG */ +#endif /* CONFIG_SAMSUNG_PM_DEBUG */ /* Save the UART configurations if we are configured for debug. */ unsigned char pm_uart_udivslot; -#ifdef CONFIG_S3C2410_PM_DEBUG +#ifdef CONFIG_SAMSUNG_PM_DEBUG struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 342647eb91d..a806f359ceb 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -117,13 +117,6 @@ config S3C2410_DMA_DEBUG Enable debugging output for the DMA code. This option sends info to the kernel log, at priority KERN_DEBUG. -config S3C24XX_ADC - bool "ADC common driver support" - help - Core support for the ADC block found in the S3C24XX SoC systems - for drivers such as the touchscreen and hwmon to use to share - this resource. - # SPI default pin configuration code config S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13 diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 5dee8c12e8b..e0100266d03 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -38,7 +38,6 @@ obj-$(CONFIG_PM) += irq-pm.o obj-$(CONFIG_PM) += sleep.o obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o obj-$(CONFIG_S3C2410_DMA) += dma.o -obj-$(CONFIG_S3C24XX_ADC) += adc.o obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c index ac061a1bcb3..cf97caafe56 100644 --- a/arch/arm/plat-s3c24xx/clock-dclk.c +++ b/arch/arm/plat-s3c24xx/clock-dclk.c @@ -161,14 +161,18 @@ static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) /* external clock definitions */ +static struct clk_ops dclk_ops = { + .set_parent = s3c24xx_dclk_setparent, + .set_rate = s3c24xx_set_dclk_rate, + .round_rate = s3c24xx_round_dclk_rate, +}; + struct clk s3c24xx_dclk0 = { .name = "dclk0", .id = -1, .ctrlbit = S3C2410_DCLKCON_DCLK0EN, .enable = s3c24xx_dclk_enable, - .set_parent = s3c24xx_dclk_setparent, - .set_rate = s3c24xx_set_dclk_rate, - .round_rate = s3c24xx_round_dclk_rate, + .ops = &dclk_ops, }; struct clk s3c24xx_dclk1 = { @@ -176,19 +180,21 @@ struct clk s3c24xx_dclk1 = { .id = -1, .ctrlbit = S3C2410_DCLKCON_DCLK1EN, .enable = s3c24xx_dclk_enable, - .set_parent = s3c24xx_dclk_setparent, - .set_rate = s3c24xx_set_dclk_rate, - .round_rate = s3c24xx_round_dclk_rate, + .ops = &dclk_ops, +}; + +static struct clk_ops clkout_ops = { + .set_parent = s3c24xx_clkout_setparent, }; struct clk s3c24xx_clkout0 = { .name = "clkout0", .id = -1, - .set_parent = s3c24xx_clkout_setparent, + .ops = &clkout_ops, }; struct clk s3c24xx_clkout1 = { .name = "clkout1", .id = -1, - .set_parent = s3c24xx_clkout_setparent, + .ops = &clkout_ops, }; diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index 7f686a31e67..986d4e5408f 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -32,6 +32,7 @@ #include <plat/regs-serial.h> #include <plat/udc.h> +#include <plat/mci.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -112,34 +113,6 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = { }, }; -/* yart devices */ - -static struct platform_device s3c24xx_uart_device0 = { - .id = 0, -}; - -static struct platform_device s3c24xx_uart_device1 = { - .id = 1, -}; - -static struct platform_device s3c24xx_uart_device2 = { - .id = 2, -}; - -static struct platform_device s3c24xx_uart_device3 = { - .id = 3, -}; - -struct platform_device *s3c24xx_uart_src[4] = { - &s3c24xx_uart_device0, - &s3c24xx_uart_device1, - &s3c24xx_uart_device2, - &s3c24xx_uart_device3, -}; - -struct platform_device *s3c24xx_uart_devs[4] = { -}; - /* LCD Controller */ static struct resource s3c_lcd_resource[] = { @@ -379,6 +352,18 @@ struct platform_device s3c_device_sdi = { EXPORT_SYMBOL(s3c_device_sdi); +void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata) +{ + struct s3c24xx_mci_pdata *npd; + + npd = kmemdup(pdata, sizeof(struct s3c24xx_mci_pdata), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory to copy pdata", __func__); + + s3c_device_sdi.dev.platform_data = npd; +} + + /* SPI (0) */ static struct resource s3c_spi0_resource[] = { diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 6d7a961d326..4f0f11a6a67 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -20,7 +20,7 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <mach/gpio-core.h> +#include <plat/gpio-core.h> #include <mach/hardware.h> #include <asm/irq.h> #include <plat/pm.h> diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h index 36aaa10fad0..2ac2b21ec49 100644 --- a/arch/arm/plat-s3c24xx/include/plat/mci.h +++ b/arch/arm/plat-s3c24xx/include/plat/mci.h @@ -40,4 +40,13 @@ struct s3c24xx_mci_pdata { unsigned short vdd); }; +/** + * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device + * @pdata: The platform data + * + * Copy the platform data supplied by @pdata so that this can be marked + * __initdata. + */ +extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata); + #endif /* _ARCH_NCI_H */ diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c index 79371091aa3..f8d96130d1d 100644 --- a/arch/arm/plat-s3c24xx/s3c244x-clock.c +++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c @@ -68,7 +68,9 @@ static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent) static struct clk clk_arm = { .name = "armclk", .id = -1, - .set_parent = s3c2440_setparent_armclk, + .ops = &(struct clk_ops) { + .set_parent = s3c2440_setparent_armclk, + }, }; static int s3c244x_clk_add(struct sys_device *sysdev) diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig index e6da87a5885..37b4519fb83 100644 --- a/arch/arm/plat-s3c64xx/Kconfig +++ b/arch/arm/plat-s3c64xx/Kconfig @@ -13,12 +13,16 @@ config PLAT_S3C64XX select ARM_VIC select NO_IOPORT select ARCH_REQUIRE_GPIOLIB + select SAMSUNG_CLKSRC + select SAMSUNG_IRQ_VIC_TIMER + select SAMSUNG_IRQ_UART select S3C_GPIO_TRACK select S3C_GPIO_PULL_UPDOWN select S3C_GPIO_CFG_S3C24XX select S3C_GPIO_CFG_S3C64XX select S3C_DEV_NAND select USB_ARCH_HAS_OHCI + select SAMSUNG_GPIOLIB_4BIT help Base platform code for any Samsung S3C64XX device diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile index b85b4359e93..80255a5e178 100644 --- a/arch/arm/plat-s3c64xx/Makefile +++ b/arch/arm/plat-s3c64xx/Makefile @@ -13,6 +13,7 @@ obj- := # Core files obj-y += dev-uart.o +obj-y += dev-rtc.o obj-y += cpu.o obj-y += irq.o obj-y += irq-eint.o @@ -35,6 +36,10 @@ obj-$(CONFIG_PM) += irq-pm.o obj-$(CONFIG_S3C64XX_DMA) += dma.o +# ADC support + +obj-$(CONFIG_S3C_ADC) += dev-adc.o + # Device setup obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o @@ -42,3 +47,4 @@ obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o +obj-$(CONFIG_SPI_S3C64XX) += dev-spi.o diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c index 7a36e899360..2989c3a2e94 100644 --- a/arch/arm/plat-s3c64xx/clock.c +++ b/arch/arm/plat-s3c64xx/clock.c @@ -141,6 +141,18 @@ static struct clk init_clocks_disable[] = { .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_SPI1, }, { + .name = "spi_48m", + .id = 0, + .parent = &clk_48m, + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_SPI0_48, + }, { + .name = "spi_48m", + .id = 1, + .parent = &clk_48m, + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_SPI1_48, + }, { .name = "48m", .id = 0, .parent = &clk_48m, @@ -274,15 +286,7 @@ void __init s3c64xx_register_clocks(void) int ptr; s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - clkp = init_clocks; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); clkp = init_clocks_disable; for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c index 49796d2db86..bc7ca1812e3 100644 --- a/arch/arm/plat-s3c64xx/cpu.c +++ b/arch/arm/plat-s3c64xx/cpu.c @@ -73,17 +73,22 @@ static struct map_desc s3c_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S3C_VA_MEM, + .pfn = __phys_to_pfn(S3C64XX_PA_SROM), + .length = SZ_4K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)(S3C_VA_UART + UART_OFFS), .pfn = __phys_to_pfn(S3C_PA_UART), .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S3C_VA_VIC0, + .virtual = (unsigned long)VA_VIC0, .pfn = __phys_to_pfn(S3C64XX_PA_VIC0), .length = SZ_16K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S3C_VA_VIC1, + .virtual = (unsigned long)VA_VIC1, .pfn = __phys_to_pfn(S3C64XX_PA_VIC1), .length = SZ_16K, .type = MT_DEVICE, diff --git a/arch/arm/plat-s3c64xx/dev-adc.c b/arch/arm/plat-s3c64xx/dev-adc.c new file mode 100644 index 00000000000..fafef9b6bcf --- /dev/null +++ b/arch/arm/plat-s3c64xx/dev-adc.c @@ -0,0 +1,46 @@ +/* linux/arch/arm/plat-s3c64xx/dev-adc.c + * + * Copyright 2010 Maurus Cuelenaere + * + * S3C64xx series device definition for ADC device + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/adc.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +static struct resource s3c_adc_resource[] = { + [0] = { + .start = S3C64XX_PA_ADC, + .end = S3C64XX_PA_ADC + SZ_256 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TC, + .end = IRQ_TC, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_ADC, + .end = IRQ_ADC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_adc = { + .name = "s3c64xx-adc", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_adc_resource), + .resource = s3c_adc_resource, +}; diff --git a/arch/arm/plat-s3c64xx/dev-audio.c b/arch/arm/plat-s3c64xx/dev-audio.c index a21a88fbb7e..f6b7bfb519d 100644 --- a/arch/arm/plat-s3c64xx/dev-audio.c +++ b/arch/arm/plat-s3c64xx/dev-audio.c @@ -3,7 +3,6 @@ * Copyright 2009 Wolfson Microelectronics * Mark Brown <broonie@opensource.wolfsonmicro.com> * - * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -20,16 +19,69 @@ #include <plat/devs.h> #include <plat/audio.h> +#include <plat/gpio-bank-c.h> #include <plat/gpio-bank-d.h> #include <plat/gpio-bank-e.h> +#include <plat/gpio-bank-h.h> #include <plat/gpio-cfg.h> +static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_I2S0_CLK); + s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_I2S0_CDCLK); + s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_I2S0_LRCLK); + s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_I2S0_DI); + s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_I2S0_D0); + break; + case 1: + s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_I2S1_CLK); + s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_I2S1_CDCLK); + s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_I2S1_LRCLK); + s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_I2S1_DI); + s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_I2S1_D0); + default: + printk(KERN_DEBUG "Invalid I2S Controller number!"); + return -EINVAL; + } + + return 0; +} + +static int s3c64xx_i2sv4_cfg_gpio(struct platform_device *pdev) +{ + s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_I2S_V40_DO0); + s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_I2S_V40_DO1); + s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C64XX_GPC7_I2S_V40_DO2); + s3c_gpio_cfgpin(S3C64XX_GPH(6), S3C64XX_GPH6_I2S_V40_BCLK); + s3c_gpio_cfgpin(S3C64XX_GPH(7), S3C64XX_GPH7_I2S_V40_CDCLK); + s3c_gpio_cfgpin(S3C64XX_GPH(8), S3C64XX_GPH8_I2S_V40_LRCLK); + s3c_gpio_cfgpin(S3C64XX_GPH(9), S3C64XX_GPH9_I2S_V40_DI); + + return 0; +} + static struct resource s3c64xx_iis0_resource[] = { [0] = { .start = S3C64XX_PA_IIS0, .end = S3C64XX_PA_IIS0 + 0x100 - 1, .flags = IORESOURCE_MEM, }, + [1] = { + .start = DMACH_I2S0_OUT, + .end = DMACH_I2S0_OUT, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S0_IN, + .end = DMACH_I2S0_IN, + .flags = IORESOURCE_DMA, + }, +}; + +static struct s3c_audio_pdata s3c_i2s0_pdata = { + .cfg_gpio = s3c64xx_i2sv3_cfg_gpio, }; struct platform_device s3c64xx_device_iis0 = { @@ -37,6 +89,9 @@ struct platform_device s3c64xx_device_iis0 = { .id = 0, .num_resources = ARRAY_SIZE(s3c64xx_iis0_resource), .resource = s3c64xx_iis0_resource, + .dev = { + .platform_data = &s3c_i2s0_pdata, + }, }; EXPORT_SYMBOL(s3c64xx_device_iis0); @@ -46,6 +101,20 @@ static struct resource s3c64xx_iis1_resource[] = { .end = S3C64XX_PA_IIS1 + 0x100 - 1, .flags = IORESOURCE_MEM, }, + [1] = { + .start = DMACH_I2S1_OUT, + .end = DMACH_I2S1_OUT, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S1_IN, + .end = DMACH_I2S1_IN, + .flags = IORESOURCE_DMA, + }, +}; + +static struct s3c_audio_pdata s3c_i2s1_pdata = { + .cfg_gpio = s3c64xx_i2sv3_cfg_gpio, }; struct platform_device s3c64xx_device_iis1 = { @@ -53,6 +122,9 @@ struct platform_device s3c64xx_device_iis1 = { .id = 1, .num_resources = ARRAY_SIZE(s3c64xx_iis1_resource), .resource = s3c64xx_iis1_resource, + .dev = { + .platform_data = &s3c_i2s1_pdata, + }, }; EXPORT_SYMBOL(s3c64xx_device_iis1); @@ -62,6 +134,20 @@ static struct resource s3c64xx_iisv4_resource[] = { .end = S3C64XX_PA_IISV4 + 0x100 - 1, .flags = IORESOURCE_MEM, }, + [1] = { + .start = DMACH_HSI_I2SV40_TX, + .end = DMACH_HSI_I2SV40_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_HSI_I2SV40_RX, + .end = DMACH_HSI_I2SV40_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct s3c_audio_pdata s3c_i2sv4_pdata = { + .cfg_gpio = s3c64xx_i2sv4_cfg_gpio, }; struct platform_device s3c64xx_device_iisv4 = { @@ -69,6 +155,9 @@ struct platform_device s3c64xx_device_iisv4 = { .id = -1, .num_resources = ARRAY_SIZE(s3c64xx_iisv4_resource), .resource = s3c64xx_iisv4_resource, + .dev = { + .platform_data = &s3c_i2sv4_pdata, + }, }; EXPORT_SYMBOL(s3c64xx_device_iisv4); diff --git a/arch/arm/plat-s3c64xx/dev-rtc.c b/arch/arm/plat-s3c64xx/dev-rtc.c new file mode 100644 index 00000000000..b9e7a05f012 --- /dev/null +++ b/arch/arm/plat-s3c64xx/dev-rtc.c @@ -0,0 +1,43 @@ +/* linux/arch/arm/plat-s3c64xx/dev-rtc.c + * + * Copyright 2009 by Maurus Cuelenaere <mcuelenaere@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/devs.h> + +static struct resource s3c_rtc_resource[] = { + [0] = { + .start = S3C64XX_PA_RTC, + .end = S3C64XX_PA_RTC + 0xff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_RTC_ALARM, + .end = IRQ_RTC_ALARM, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_RTC_TIC, + .end = IRQ_RTC_TIC, + .flags = IORESOURCE_IRQ + } +}; + +struct platform_device s3c_device_rtc = { + .name = "s3c64xx-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_rtc_resource), + .resource = s3c_rtc_resource, +}; +EXPORT_SYMBOL(s3c_device_rtc); diff --git a/arch/arm/plat-s3c64xx/dev-spi.c b/arch/arm/plat-s3c64xx/dev-spi.c new file mode 100644 index 00000000000..ca10388d7ed --- /dev/null +++ b/arch/arm/plat-s3c64xx/dev-spi.c @@ -0,0 +1,183 @@ +/* linux/arch/arm/plat-s3c64xx/dev-spi.c + * + * Copyright (C) 2009 Samsung Electronics Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <mach/dma.h> +#include <mach/map.h> +#include <mach/gpio.h> + +#include <plat/spi-clocks.h> + +#include <plat/s3c64xx-spi.h> +#include <plat/gpio-bank-c.h> +#include <plat/gpio-cfg.h> +#include <plat/irqs.h> + +static char *spi_src_clks[] = { + [S3C64XX_SPI_SRCCLK_PCLK] = "pclk", + [S3C64XX_SPI_SRCCLK_SPIBUS] = "spi-bus", + [S3C64XX_SPI_SRCCLK_48M] = "spi_48m", +}; + +/* SPI Controller platform_devices */ + +/* Since we emulate multi-cs capability, we do not touch the GPC-3,7. + * The emulated CS is toggled by board specific mechanism, as it can + * be either some immediate GPIO or some signal out of some other + * chip in between ... or some yet another way. + * We simply do not assume anything about CS. + */ +static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S3C64XX_GPC(0), S3C64XX_GPC0_SPI_MISO0); + s3c_gpio_cfgpin(S3C64XX_GPC(1), S3C64XX_GPC1_SPI_CLKO); + s3c_gpio_cfgpin(S3C64XX_GPC(2), S3C64XX_GPC2_SPI_MOSIO); + s3c_gpio_setpull(S3C64XX_GPC(0), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S3C64XX_GPC(1), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S3C64XX_GPC(2), S3C_GPIO_PULL_UP); + break; + + case 1: + s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_SPI_MISO1); + s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_SPI_CLK1); + s3c_gpio_cfgpin(S3C64XX_GPC(6), S3C64XX_GPC6_SPI_MOSI1); + s3c_gpio_setpull(S3C64XX_GPC(4), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S3C64XX_GPC(5), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S3C64XX_GPC(6), S3C_GPIO_PULL_UP); + break; + + default: + dev_err(&pdev->dev, "Invalid SPI Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct resource s3c64xx_spi0_resource[] = { + [0] = { + .start = S3C64XX_PA_SPI0, + .end = S3C64XX_PA_SPI0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPI0_TX, + .end = DMACH_SPI0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_SPI0_RX, + .end = DMACH_SPI0_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = IRQ_SPI0, + .end = IRQ_SPI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c64xx_spi_info s3c64xx_spi0_pdata = { + .cfg_gpio = s3c64xx_spi_cfg_gpio, + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 13, +}; + +static u64 spi_dmamask = DMA_BIT_MASK(32); + +struct platform_device s3c64xx_device_spi0 = { + .name = "s3c64xx-spi", + .id = 0, + .num_resources = ARRAY_SIZE(s3c64xx_spi0_resource), + .resource = s3c64xx_spi0_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s3c64xx_spi0_pdata, + }, +}; +EXPORT_SYMBOL(s3c64xx_device_spi0); + +static struct resource s3c64xx_spi1_resource[] = { + [0] = { + .start = S3C64XX_PA_SPI1, + .end = S3C64XX_PA_SPI1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPI1_TX, + .end = DMACH_SPI1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_SPI1_RX, + .end = DMACH_SPI1_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = IRQ_SPI1, + .end = IRQ_SPI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c64xx_spi_info s3c64xx_spi1_pdata = { + .cfg_gpio = s3c64xx_spi_cfg_gpio, + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 13, +}; + +struct platform_device s3c64xx_device_spi1 = { + .name = "s3c64xx-spi", + .id = 1, + .num_resources = ARRAY_SIZE(s3c64xx_spi1_resource), + .resource = s3c64xx_spi1_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s3c64xx_spi1_pdata, + }, +}; +EXPORT_SYMBOL(s3c64xx_device_spi1); + +void __init s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) +{ + struct s3c64xx_spi_info *pd; + + /* Reject invalid configuration */ + if (!num_cs || src_clk_nr < 0 + || src_clk_nr > S3C64XX_SPI_SRCCLK_48M) { + printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); + return; + } + + switch (cntrlr) { + case 0: + pd = &s3c64xx_spi0_pdata; + break; + case 1: + pd = &s3c64xx_spi1_pdata; + break; + default: + printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", + __func__, cntrlr); + return; + } + + pd->num_cs = num_cs; + pd->src_clk_nr = src_clk_nr; + pd->src_clk_name = spi_src_clks[src_clk_nr]; +} diff --git a/arch/arm/plat-s3c64xx/dev-uart.c b/arch/arm/plat-s3c64xx/dev-uart.c index 62c11a6fc7b..f797f748b99 100644 --- a/arch/arm/plat-s3c64xx/dev-uart.c +++ b/arch/arm/plat-s3c64xx/dev-uart.c @@ -145,32 +145,3 @@ struct s3c24xx_uart_resources s3c64xx_uart_resources[] __initdata = { .nr_resources = ARRAY_SIZE(s3c64xx_uart3_resource), }, }; - -/* uart devices */ - -static struct platform_device s3c24xx_uart_device0 = { - .id = 0, -}; - -static struct platform_device s3c24xx_uart_device1 = { - .id = 1, -}; - -static struct platform_device s3c24xx_uart_device2 = { - .id = 2, -}; - -static struct platform_device s3c24xx_uart_device3 = { - .id = 3, -}; - -struct platform_device *s3c24xx_uart_src[4] = { - &s3c24xx_uart_device0, - &s3c24xx_uart_device1, - &s3c24xx_uart_device2, - &s3c24xx_uart_device3, -}; - -struct platform_device *s3c24xx_uart_devs[4] = { -}; - diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c index 77856045727..b6e3f55321f 100644 --- a/arch/arm/plat-s3c64xx/gpiolib.c +++ b/arch/arm/plat-s3c64xx/gpiolib.c @@ -18,8 +18,8 @@ #include <mach/map.h> #include <mach/gpio.h> -#include <mach/gpio-core.h> +#include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> #include <plat/regs-gpio.h> @@ -49,150 +49,6 @@ * [2] BANK has two control registers, GPxCON0 and GPxCON1 */ -#define OFF_GPCON (0x00) -#define OFF_GPDAT (0x04) - -#define con_4bit_shift(__off) ((__off) * 4) - -#if 1 -#define gpio_dbg(x...) do { } while(0) -#else -#define gpio_dbg(x...) printk(KERN_DEBUG x) -#endif - -/* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where - * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the - * following example: - * - * base + 0x00: Control register, 4 bits per gpio - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x04: Data register, 1 bit per gpio - * bit n: data bit n - * - * Note, since the data register is one bit per gpio and is at base + 0x4 - * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of - * the output. -*/ - -static int s3c64xx_gpiolib_4bit_input(struct gpio_chip *chip, unsigned offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long con; - - con = __raw_readl(base + OFF_GPCON); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, base + OFF_GPCON); - - gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); - - return 0; -} - -static int s3c64xx_gpiolib_4bit_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long con; - unsigned long dat; - - con = __raw_readl(base + OFF_GPCON); - con &= ~(0xf << con_4bit_shift(offset)); - con |= 0x1 << con_4bit_shift(offset); - - dat = __raw_readl(base + OFF_GPDAT); - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(dat, base + OFF_GPDAT); - __raw_writel(con, base + OFF_GPCON); - __raw_writel(dat, base + OFF_GPDAT); - - gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); - - return 0; -} - -/* The next set of routines are for the case where the GPIO configuration - * registers are 4 bits per GPIO but there is more than one register (the - * bank has more than 8 GPIOs. - * - * This case is the similar to the 4 bit case, but the registers are as - * follows: - * - * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs) - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs) - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x08: Data register, 1 bit per gpio - * bit n: data bit n - * - * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we - * store the 'base + 0x4' address so that these routines see the data - * register at ourchip->base + 0x04. -*/ - -static int s3c64xx_gpiolib_4bit2_input(struct gpio_chip *chip, unsigned offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - - if (offset > 7) - offset -= 8; - else - regcon -= 4; - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, regcon); - - gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con); - - return 0; - -} - -static int s3c64xx_gpiolib_4bit2_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - unsigned long dat; - - if (offset > 7) - offset -= 8; - else - regcon -= 4; - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(offset)); - con |= 0x1 << con_4bit_shift(offset); - - dat = __raw_readl(base + OFF_GPDAT); - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(dat, base + OFF_GPDAT); - __raw_writel(con, regcon); - __raw_writel(dat, base + OFF_GPDAT); - - gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); - - return 0; -} - static struct s3c_gpio_cfg gpio_4bit_cfg_noint = { .set_config = s3c_gpio_setcfg_s3c64xx_4bit, .set_pull = s3c_gpio_setpull_updown, @@ -399,20 +255,6 @@ static struct s3c_gpio_chip gpio_2bit[] = { }, }; -static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip) -{ - chip->chip.direction_input = s3c64xx_gpiolib_4bit_input; - chip->chip.direction_output = s3c64xx_gpiolib_4bit_output; - chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); -} - -static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip) -{ - chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input; - chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output; - chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); -} - static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip) { chip->pm = __gpio_pm(&s3c_gpio_pm_2bit); @@ -432,10 +274,10 @@ static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips, static __init int s3c64xx_gpiolib_init(void) { s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit), - s3c64xx_gpiolib_add_4bit); + samsung_gpiolib_add_4bit); s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2), - s3c64xx_gpiolib_add_4bit2); + samsung_gpiolib_add_4bit2); s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), s3c64xx_gpiolib_add_2bit); diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h index 7956fd3bb19..a22758194e6 100644 --- a/arch/arm/plat-s3c64xx/include/plat/irqs.h +++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h @@ -24,8 +24,8 @@ #define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET) -#define S3C_VIC0_BASE S3C_IRQ(0) -#define S3C_VIC1_BASE S3C_IRQ(32) +#define IRQ_VIC0_BASE S3C_IRQ(0) +#define IRQ_VIC1_BASE S3C_IRQ(32) /* UART interrupts, each UART has 4 intterupts per channel so * use the space between the ISA and S3C main interrupts. Note, these @@ -59,8 +59,8 @@ /* VIC based IRQs */ -#define S3C64XX_IRQ_VIC0(x) (S3C_VIC0_BASE + (x)) -#define S3C64XX_IRQ_VIC1(x) (S3C_VIC1_BASE + (x)) +#define S3C64XX_IRQ_VIC0(x) (IRQ_VIC0_BASE + (x)) +#define S3C64XX_IRQ_VIC1(x) (IRQ_VIC1_BASE + (x)) /* VIC0 */ @@ -198,7 +198,11 @@ * interrupt controllers). */ #define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1) +#ifdef CONFIG_SMDK6410_WM1190_EV1 +#define IRQ_BOARD_NR 64 +#else #define IRQ_BOARD_NR 16 +#endif #define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR) diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h index ff46e7fa957..3ef62741e5d 100644 --- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h +++ b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h @@ -35,14 +35,6 @@ #define S3C_MEM0_GATE S3C_CLKREG(0x3C) /* CLKDIV0 */ -#define S3C6400_CLKDIV0_MFC_MASK (0xf << 28) -#define S3C6400_CLKDIV0_MFC_SHIFT (28) -#define S3C6400_CLKDIV0_JPEG_MASK (0xf << 24) -#define S3C6400_CLKDIV0_JPEG_SHIFT (24) -#define S3C6400_CLKDIV0_CAM_MASK (0xf << 20) -#define S3C6400_CLKDIV0_CAM_SHIFT (20) -#define S3C6400_CLKDIV0_SECURITY_MASK (0x3 << 18) -#define S3C6400_CLKDIV0_SECURITY_SHIFT (18) #define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12) #define S3C6400_CLKDIV0_PCLK_SHIFT (12) #define S3C6400_CLKDIV0_HCLK2_MASK (0x7 << 9) @@ -51,42 +43,11 @@ #define S3C6400_CLKDIV0_HCLK_SHIFT (8) #define S3C6400_CLKDIV0_MPLL_MASK (0x1 << 4) #define S3C6400_CLKDIV0_MPLL_SHIFT (4) + #define S3C6400_CLKDIV0_ARM_MASK (0x7 << 0) #define S3C6410_CLKDIV0_ARM_MASK (0xf << 0) #define S3C6400_CLKDIV0_ARM_SHIFT (0) -/* CLKDIV1 */ -#define S3C6410_CLKDIV1_FIMC_MASK (0xf << 24) -#define S3C6410_CLKDIV1_FIMC_SHIFT (24) -#define S3C6400_CLKDIV1_UHOST_MASK (0xf << 20) -#define S3C6400_CLKDIV1_UHOST_SHIFT (20) -#define S3C6400_CLKDIV1_SCALER_MASK (0xf << 16) -#define S3C6400_CLKDIV1_SCALER_SHIFT (16) -#define S3C6400_CLKDIV1_LCD_MASK (0xf << 12) -#define S3C6400_CLKDIV1_LCD_SHIFT (12) -#define S3C6400_CLKDIV1_MMC2_MASK (0xf << 8) -#define S3C6400_CLKDIV1_MMC2_SHIFT (8) -#define S3C6400_CLKDIV1_MMC1_MASK (0xf << 4) -#define S3C6400_CLKDIV1_MMC1_SHIFT (4) -#define S3C6400_CLKDIV1_MMC0_MASK (0xf << 0) -#define S3C6400_CLKDIV1_MMC0_SHIFT (0) - -/* CLKDIV2 */ -#define S3C6410_CLKDIV2_AUDIO2_MASK (0xf << 24) -#define S3C6410_CLKDIV2_AUDIO2_SHIFT (24) -#define S3C6400_CLKDIV2_IRDA_MASK (0xf << 20) -#define S3C6400_CLKDIV2_IRDA_SHIFT (20) -#define S3C6400_CLKDIV2_UART_MASK (0xf << 16) -#define S3C6400_CLKDIV2_UART_SHIFT (16) -#define S3C6400_CLKDIV2_AUDIO1_MASK (0xf << 12) -#define S3C6400_CLKDIV2_AUDIO1_SHIFT (12) -#define S3C6400_CLKDIV2_AUDIO0_MASK (0xf << 8) -#define S3C6400_CLKDIV2_AUDIO0_SHIFT (8) -#define S3C6400_CLKDIV2_SPI1_MASK (0xf << 4) -#define S3C6400_CLKDIV2_SPI1_SHIFT (4) -#define S3C6400_CLKDIV2_SPI0_MASK (0xf << 0) -#define S3C6400_CLKDIV2_SPI0_SHIFT (0) - /* HCLK GATE Registers */ #define S3C_CLKCON_HCLK_3DSE (1<<31) #define S3C_CLKCON_HCLK_UHOST (1<<29) @@ -192,34 +153,4 @@ #define S3C6400_CLKSRC_EPLL_MOUT_SHIFT (2) #define S3C6400_CLKSRC_MFC (1 << 4) -#define S3C6410_CLKSRC_TV27_MASK (0x1 << 31) -#define S3C6410_CLKSRC_TV27_SHIFT (31) -#define S3C6410_CLKSRC_DAC27_MASK (0x1 << 30) -#define S3C6410_CLKSRC_DAC27_SHIFT (30) -#define S3C6400_CLKSRC_SCALER_MASK (0x3 << 28) -#define S3C6400_CLKSRC_SCALER_SHIFT (28) -#define S3C6400_CLKSRC_LCD_MASK (0x3 << 26) -#define S3C6400_CLKSRC_LCD_SHIFT (26) -#define S3C6400_CLKSRC_IRDA_MASK (0x3 << 24) -#define S3C6400_CLKSRC_IRDA_SHIFT (24) -#define S3C6400_CLKSRC_MMC2_MASK (0x3 << 22) -#define S3C6400_CLKSRC_MMC2_SHIFT (22) -#define S3C6400_CLKSRC_MMC1_MASK (0x3 << 20) -#define S3C6400_CLKSRC_MMC1_SHIFT (20) -#define S3C6400_CLKSRC_MMC0_MASK (0x3 << 18) -#define S3C6400_CLKSRC_MMC0_SHIFT (18) -#define S3C6400_CLKSRC_SPI1_MASK (0x3 << 16) -#define S3C6400_CLKSRC_SPI1_SHIFT (16) -#define S3C6400_CLKSRC_SPI0_MASK (0x3 << 14) -#define S3C6400_CLKSRC_SPI0_SHIFT (14) -#define S3C6400_CLKSRC_UART_MASK (0x1 << 13) -#define S3C6400_CLKSRC_UART_SHIFT (13) -#define S3C6400_CLKSRC_AUDIO1_MASK (0x7 << 10) -#define S3C6400_CLKSRC_AUDIO1_SHIFT (10) -#define S3C6400_CLKSRC_AUDIO0_MASK (0x7 << 7) -#define S3C6400_CLKSRC_AUDIO0_SHIFT (7) -#define S3C6400_CLKSRC_UHOST_MASK (0x3 << 5) -#define S3C6400_CLKSRC_UHOST_SHIFT (5) - - #endif /* _PLAT_REGS_CLOCK_H */ diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-srom.h b/arch/arm/plat-s3c64xx/include/plat/regs-srom.h new file mode 100644 index 00000000000..756731b3629 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/regs-srom.h @@ -0,0 +1,59 @@ +/* arch/arm/plat-s3c64xx/include/plat/regs-srom.h + * + * Copyright 2009 Andy Green <andy@warmcat.com> + * + * S3C64XX SROM definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_REGS_SROM_H +#define __PLAT_REGS_SROM_H __FILE__ + +#define S3C64XX_SROMREG(x) (S3C_VA_MEM + (x)) + +#define S3C64XX_SROM_BW S3C64XX_SROMREG(0) +#define S3C64XX_SROM_BC0 S3C64XX_SROMREG(4) +#define S3C64XX_SROM_BC1 S3C64XX_SROMREG(8) +#define S3C64XX_SROM_BC2 S3C64XX_SROMREG(0xc) +#define S3C64XX_SROM_BC3 S3C64XX_SROMREG(0x10) +#define S3C64XX_SROM_BC4 S3C64XX_SROMREG(0x14) +#define S3C64XX_SROM_BC5 S3C64XX_SROMREG(0x18) + +/* + * one register BW holds 5 x 4-bit packed settings for NCS0 - NCS4 + */ + +#define S3C64XX_SROM_BW__DATAWIDTH__SHIFT 0 +#define S3C64XX_SROM_BW__WAITENABLE__SHIFT 2 +#define S3C64XX_SROM_BW__BYTEENABLE__SHIFT 3 +#define S3C64XX_SROM_BW__CS_MASK 0xf + +#define S3C64XX_SROM_BW__NCS0__SHIFT 0 +#define S3C64XX_SROM_BW__NCS1__SHIFT 4 +#define S3C64XX_SROM_BW__NCS2__SHIFT 8 +#define S3C64XX_SROM_BW__NCS3__SHIFT 0xc +#define S3C64XX_SROM_BW__NCS4__SHIFT 0x10 + +/* + * applies to same to BCS0 - BCS4 + */ + +#define S3C64XX_SROM_BCX__PMC__SHIFT 0 +#define S3C64XX_SROM_BCX__PMC__MASK 3 +#define S3C64XX_SROM_BCX__TACP__SHIFT 4 +#define S3C64XX_SROM_BCX__TACP__MASK 0xf +#define S3C64XX_SROM_BCX__TCAH__SHIFT 8 +#define S3C64XX_SROM_BCX__TCAH__MASK 0xf +#define S3C64XX_SROM_BCX__TCOH__SHIFT 12 +#define S3C64XX_SROM_BCX__TCOH__MASK 0xf +#define S3C64XX_SROM_BCX__TACC__SHIFT 16 +#define S3C64XX_SROM_BCX__TACC__MASK 0x1f +#define S3C64XX_SROM_BCX__TCOS__SHIFT 24 +#define S3C64XX_SROM_BCX__TCOS__MASK 0xf +#define S3C64XX_SROM_BCX__TACS__SHIFT 28 +#define S3C64XX_SROM_BCX__TACS__MASK 0xf + +#endif /* _PLAT_REGS_SROM_H */ diff --git a/arch/arm/plat-s3c64xx/include/plat/spi-clocks.h b/arch/arm/plat-s3c64xx/include/plat/spi-clocks.h new file mode 100644 index 00000000000..524bdae3f62 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/spi-clocks.h @@ -0,0 +1,18 @@ +/* linux/arch/arm/plat-s3c64xx/include/plat/spi-clocks.h + * + * Copyright (C) 2009 Samsung Electronics Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __S3C64XX_PLAT_SPI_CLKS_H +#define __S3C64XX_PLAT_SPI_CLKS_H __FILE__ + +#define S3C64XX_SPI_SRCCLK_PCLK 0 +#define S3C64XX_SPI_SRCCLK_SPIBUS 1 +#define S3C64XX_SPI_SRCCLK_48M 2 + +#endif /* __S3C64XX_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c index 8dc5b6da978..67a145d440f 100644 --- a/arch/arm/plat-s3c64xx/irq.c +++ b/arch/arm/plat-s3c64xx/irq.c @@ -21,88 +21,11 @@ #include <asm/hardware/vic.h> #include <mach/map.h> -#include <plat/regs-serial.h> -#include <plat/regs-timer.h> +#include <plat/irq-vic-timer.h> +#include <plat/irq-uart.h> #include <plat/cpu.h> -/* Timer interrupt handling */ - -static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq) -{ - generic_handle_irq(sub_irq); -} - -static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_timer(irq, IRQ_TIMER0); -} - -static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_timer(irq, IRQ_TIMER1); -} - -static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_timer(irq, IRQ_TIMER2); -} - -static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_timer(irq, IRQ_TIMER3); -} - -static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_timer(irq, IRQ_TIMER4); -} - -/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */ - -static void s3c_irq_timer_mask(unsigned int irq) -{ - u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); - - reg &= 0x1f; /* mask out pending interrupts */ - reg &= ~(1 << (irq - IRQ_TIMER0)); - __raw_writel(reg, S3C64XX_TINT_CSTAT); -} - -static void s3c_irq_timer_unmask(unsigned int irq) -{ - u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); - - reg &= 0x1f; /* mask out pending interrupts */ - reg |= 1 << (irq - IRQ_TIMER0); - __raw_writel(reg, S3C64XX_TINT_CSTAT); -} - -static void s3c_irq_timer_ack(unsigned int irq) -{ - u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); - - reg &= 0x1f; - reg |= (1 << 5) << (irq - IRQ_TIMER0); - __raw_writel(reg, S3C64XX_TINT_CSTAT); -} - -static struct irq_chip s3c_irq_timer = { - .name = "s3c-timer", - .mask = s3c_irq_timer_mask, - .unmask = s3c_irq_timer_unmask, - .ack = s3c_irq_timer_ack, -}; - -struct uart_irq { - void __iomem *regs; - unsigned int base_irq; - unsigned int parent_irq; -}; - -/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3] - * are consecutive when looking up the interrupt in the demux routines. - */ -static struct uart_irq uart_irqs[] = { +static struct s3c_uart_irq uart_irqs[] = { [0] = { .regs = S3C_VA_UART0, .base_irq = IRQ_S3CUART_BASE0, @@ -125,132 +48,22 @@ static struct uart_irq uart_irqs[] = { }, }; -static inline void __iomem *s3c_irq_uart_base(unsigned int irq) -{ - struct uart_irq *uirq = get_irq_chip_data(irq); - return uirq->regs; -} - -static inline unsigned int s3c_irq_uart_bit(unsigned int irq) -{ - return irq & 3; -} - -/* UART interrupt registers, not worth adding to seperate include header */ - -static void s3c_irq_uart_mask(unsigned int irq) -{ - void __iomem *regs = s3c_irq_uart_base(irq); - unsigned int bit = s3c_irq_uart_bit(irq); - u32 reg; - - reg = __raw_readl(regs + S3C64XX_UINTM); - reg |= (1 << bit); - __raw_writel(reg, regs + S3C64XX_UINTM); -} - -static void s3c_irq_uart_maskack(unsigned int irq) -{ - void __iomem *regs = s3c_irq_uart_base(irq); - unsigned int bit = s3c_irq_uart_bit(irq); - u32 reg; - - reg = __raw_readl(regs + S3C64XX_UINTM); - reg |= (1 << bit); - __raw_writel(reg, regs + S3C64XX_UINTM); - __raw_writel(1 << bit, regs + S3C64XX_UINTP); -} - -static void s3c_irq_uart_unmask(unsigned int irq) -{ - void __iomem *regs = s3c_irq_uart_base(irq); - unsigned int bit = s3c_irq_uart_bit(irq); - u32 reg; - - reg = __raw_readl(regs + S3C64XX_UINTM); - reg &= ~(1 << bit); - __raw_writel(reg, regs + S3C64XX_UINTM); -} - -static void s3c_irq_uart_ack(unsigned int irq) -{ - void __iomem *regs = s3c_irq_uart_base(irq); - unsigned int bit = s3c_irq_uart_bit(irq); - - __raw_writel(1 << bit, regs + S3C64XX_UINTP); -} - -static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc) -{ - struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0]; - u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP); - int base = uirq->base_irq; - - if (pend & (1 << 0)) - generic_handle_irq(base); - if (pend & (1 << 1)) - generic_handle_irq(base + 1); - if (pend & (1 << 2)) - generic_handle_irq(base + 2); - if (pend & (1 << 3)) - generic_handle_irq(base + 3); -} - -static struct irq_chip s3c_irq_uart = { - .name = "s3c-uart", - .mask = s3c_irq_uart_mask, - .unmask = s3c_irq_uart_unmask, - .mask_ack = s3c_irq_uart_maskack, - .ack = s3c_irq_uart_ack, -}; - -static void __init s3c64xx_uart_irq(struct uart_irq *uirq) -{ - void __iomem *reg_base = uirq->regs; - unsigned int irq; - int offs; - - /* mask all interrupts at the start. */ - __raw_writel(0xf, reg_base + S3C64XX_UINTM); - - for (offs = 0; offs < 3; offs++) { - irq = uirq->base_irq + offs; - - set_irq_chip(irq, &s3c_irq_uart); - set_irq_chip_data(irq, uirq); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - - set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart); -} void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid) { - int uart, irq; - printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); /* initialise the pair of VICs */ - vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid, 0); - vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid, 0); + vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, 0); + vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, 0); /* add the timer sub-irqs */ - set_irq_chained_handler(IRQ_TIMER0_VIC, s3c_irq_demux_timer0); - set_irq_chained_handler(IRQ_TIMER1_VIC, s3c_irq_demux_timer1); - set_irq_chained_handler(IRQ_TIMER2_VIC, s3c_irq_demux_timer2); - set_irq_chained_handler(IRQ_TIMER3_VIC, s3c_irq_demux_timer3); - set_irq_chained_handler(IRQ_TIMER4_VIC, s3c_irq_demux_timer4); - - for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) { - set_irq_chip(irq, &s3c_irq_timer); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } + s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0); + s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1); + s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2); + s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3); + s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4); - for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++) - s3c64xx_uart_irq(&uart_irqs[uart]); + s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs)); } - - diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index ffd56deb9e8..cb2bf4bff05 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -29,6 +29,7 @@ #include <plat/regs-clock.h> #include <plat/clock.h> +#include <plat/clock-clksrc.h> #include <plat/cpu.h> #include <plat/pll.h> @@ -48,22 +49,6 @@ static struct clk clk_ext_xtal_mux = { #define clk_fout_mpll clk_mpll #define clk_fout_epll clk_epll -struct clk_sources { - unsigned int nr_sources; - struct clk **sources; -}; - -struct clksrc_clk { - struct clk clk; - unsigned int mask; - unsigned int shift; - - struct clk_sources *sources; - - unsigned int divider_shift; - void __iomem *reg_divider; -}; - static struct clk clk_fout_apll = { .name = "fout_apll", .id = -1, @@ -74,7 +59,7 @@ static struct clk *clk_src_apll_list[] = { [1] = &clk_fout_apll, }; -static struct clk_sources clk_src_apll = { +static struct clksrc_sources clk_src_apll = { .sources = clk_src_apll_list, .nr_sources = ARRAY_SIZE(clk_src_apll_list), }; @@ -84,8 +69,7 @@ static struct clksrc_clk clk_mout_apll = { .name = "mout_apll", .id = -1, }, - .shift = S3C6400_CLKSRC_APLL_MOUT_SHIFT, - .mask = S3C6400_CLKSRC_APLL_MOUT, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 0, .size = 1 }, .sources = &clk_src_apll, }; @@ -94,7 +78,7 @@ static struct clk *clk_src_epll_list[] = { [1] = &clk_fout_epll, }; -static struct clk_sources clk_src_epll = { +static struct clksrc_sources clk_src_epll = { .sources = clk_src_epll_list, .nr_sources = ARRAY_SIZE(clk_src_epll_list), }; @@ -104,8 +88,7 @@ static struct clksrc_clk clk_mout_epll = { .name = "mout_epll", .id = -1, }, - .shift = S3C6400_CLKSRC_EPLL_MOUT_SHIFT, - .mask = S3C6400_CLKSRC_EPLL_MOUT, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 2, .size = 1 }, .sources = &clk_src_epll, }; @@ -114,7 +97,7 @@ static struct clk *clk_src_mpll_list[] = { [1] = &clk_fout_mpll, }; -static struct clk_sources clk_src_mpll = { +static struct clksrc_sources clk_src_mpll = { .sources = clk_src_mpll_list, .nr_sources = ARRAY_SIZE(clk_src_mpll_list), }; @@ -124,8 +107,7 @@ static struct clksrc_clk clk_mout_mpll = { .name = "mout_mpll", .id = -1, }, - .shift = S3C6400_CLKSRC_MPLL_MOUT_SHIFT, - .mask = S3C6400_CLKSRC_MPLL_MOUT, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 1, .size = 1 }, .sources = &clk_src_mpll, }; @@ -183,9 +165,11 @@ static struct clk clk_arm = { .name = "armclk", .id = -1, .parent = &clk_mout_apll.clk, - .get_rate = s3c64xx_clk_arm_get_rate, - .set_rate = s3c64xx_clk_arm_set_rate, - .round_rate = s3c64xx_clk_arm_round_rate, + .ops = &(struct clk_ops) { + .get_rate = s3c64xx_clk_arm_get_rate, + .set_rate = s3c64xx_clk_arm_set_rate, + .round_rate = s3c64xx_clk_arm_round_rate, + }, }; static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk) @@ -200,11 +184,15 @@ static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk) return rate; } +static struct clk_ops clk_dout_ops = { + .get_rate = s3c64xx_clk_doutmpll_get_rate, +}; + static struct clk clk_dout_mpll = { .name = "dout_mpll", .id = -1, .parent = &clk_mout_mpll.clk, - .get_rate = s3c64xx_clk_doutmpll_get_rate, + .ops = &clk_dout_ops, }; static struct clk *clkset_spi_mmc_list[] = { @@ -214,7 +202,7 @@ static struct clk *clkset_spi_mmc_list[] = { &clk_27m, }; -static struct clk_sources clkset_spi_mmc = { +static struct clksrc_sources clkset_spi_mmc = { .sources = clkset_spi_mmc_list, .nr_sources = ARRAY_SIZE(clkset_spi_mmc_list), }; @@ -226,7 +214,7 @@ static struct clk *clkset_irda_list[] = { &clk_27m, }; -static struct clk_sources clkset_irda = { +static struct clksrc_sources clkset_irda = { .sources = clkset_irda_list, .nr_sources = ARRAY_SIZE(clkset_irda_list), }; @@ -238,7 +226,7 @@ static struct clk *clkset_uart_list[] = { NULL }; -static struct clk_sources clkset_uart = { +static struct clksrc_sources clkset_uart = { .sources = clkset_uart_list, .nr_sources = ARRAY_SIZE(clkset_uart_list), }; @@ -250,12 +238,11 @@ static struct clk *clkset_uhost_list[] = { &clk_fin_epll, }; -static struct clk_sources clkset_uhost = { +static struct clksrc_sources clkset_uhost = { .sources = clkset_uhost_list, .nr_sources = ARRAY_SIZE(clkset_uhost_list), }; - /* The peripheral clocks are all controlled via clocksource followed * by an optional divider and gate stage. We currently roll this into * one clock which hides the intermediate clock from the mux. @@ -266,221 +253,7 @@ static struct clk_sources clkset_uhost = { * have a common parent divisor so are not included here. */ -static inline struct clksrc_clk *to_clksrc(struct clk *clk) -{ - return container_of(clk, struct clksrc_clk, clk); -} - -static unsigned long s3c64xx_getrate_clksrc(struct clk *clk) -{ - struct clksrc_clk *sclk = to_clksrc(clk); - unsigned long rate = clk_get_rate(clk->parent); - u32 clkdiv = __raw_readl(sclk->reg_divider); - - clkdiv >>= sclk->divider_shift; - clkdiv &= 0xf; - clkdiv++; - - rate /= clkdiv; - return rate; -} - -static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate) -{ - struct clksrc_clk *sclk = to_clksrc(clk); - void __iomem *reg = sclk->reg_divider; - unsigned int div; - u32 val; - - rate = clk_round_rate(clk, rate); - div = clk_get_rate(clk->parent) / rate; - if (div > 16) - return -EINVAL; - - val = __raw_readl(reg); - val &= ~(0xf << sclk->divider_shift); - val |= (div - 1) << sclk->divider_shift; - __raw_writel(val, reg); - - return 0; -} - -static int s3c64xx_setparent_clksrc(struct clk *clk, struct clk *parent) -{ - struct clksrc_clk *sclk = to_clksrc(clk); - struct clk_sources *srcs = sclk->sources; - u32 clksrc = __raw_readl(S3C_CLK_SRC); - int src_nr = -1; - int ptr; - - for (ptr = 0; ptr < srcs->nr_sources; ptr++) - if (srcs->sources[ptr] == parent) { - src_nr = ptr; - break; - } - - if (src_nr >= 0) { - clksrc &= ~sclk->mask; - clksrc |= src_nr << sclk->shift; - - __raw_writel(clksrc, S3C_CLK_SRC); - - clk->parent = parent; - return 0; - } - - return -EINVAL; -} - -static unsigned long s3c64xx_roundrate_clksrc(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - rate = parent_rate; - else { - div = parent_rate / rate; - - if (div == 0) - div = 1; - if (div > 16) - div = 16; - - rate = parent_rate / div; - } - - return rate; -} - -static struct clksrc_clk clk_mmc0 = { - .clk = { - .name = "mmc_bus", - .id = 0, - .ctrlbit = S3C_CLKCON_SCLK_MMC0, - .enable = s3c64xx_sclk_ctrl, - .set_parent = s3c64xx_setparent_clksrc, - .get_rate = s3c64xx_getrate_clksrc, - .set_rate = s3c64xx_setrate_clksrc, - .round_rate = s3c64xx_roundrate_clksrc, - }, - .shift = S3C6400_CLKSRC_MMC0_SHIFT, - .mask = S3C6400_CLKSRC_MMC0_MASK, - .sources = &clkset_spi_mmc, - .divider_shift = S3C6400_CLKDIV1_MMC0_SHIFT, - .reg_divider = S3C_CLK_DIV1, -}; - -static struct clksrc_clk clk_mmc1 = { - .clk = { - .name = "mmc_bus", - .id = 1, - .ctrlbit = S3C_CLKCON_SCLK_MMC1, - .enable = s3c64xx_sclk_ctrl, - .get_rate = s3c64xx_getrate_clksrc, - .set_rate = s3c64xx_setrate_clksrc, - .set_parent = s3c64xx_setparent_clksrc, - .round_rate = s3c64xx_roundrate_clksrc, - }, - .shift = S3C6400_CLKSRC_MMC1_SHIFT, - .mask = S3C6400_CLKSRC_MMC1_MASK, - .sources = &clkset_spi_mmc, - .divider_shift = S3C6400_CLKDIV1_MMC1_SHIFT, - .reg_divider = S3C_CLK_DIV1, -}; - -static struct clksrc_clk clk_mmc2 = { - .clk = { - .name = "mmc_bus", - .id = 2, - .ctrlbit = S3C_CLKCON_SCLK_MMC2, - .enable = s3c64xx_sclk_ctrl, - .get_rate = s3c64xx_getrate_clksrc, - .set_rate = s3c64xx_setrate_clksrc, - .set_parent = s3c64xx_setparent_clksrc, - .round_rate = s3c64xx_roundrate_clksrc, - }, - .shift = S3C6400_CLKSRC_MMC2_SHIFT, - .mask = S3C6400_CLKSRC_MMC2_MASK, - .sources = &clkset_spi_mmc, - .divider_shift = S3C6400_CLKDIV1_MMC2_SHIFT, - .reg_divider = S3C_CLK_DIV1, -}; - -static struct clksrc_clk clk_usbhost = { - .clk = { - .name = "usb-bus-host", - .id = -1, - .ctrlbit = S3C_CLKCON_SCLK_UHOST, - .enable = s3c64xx_sclk_ctrl, - .set_parent = s3c64xx_setparent_clksrc, - .get_rate = s3c64xx_getrate_clksrc, - .set_rate = s3c64xx_setrate_clksrc, - .round_rate = s3c64xx_roundrate_clksrc, - }, - .shift = S3C6400_CLKSRC_UHOST_SHIFT, - .mask = S3C6400_CLKSRC_UHOST_MASK, - .sources = &clkset_uhost, - .divider_shift = S3C6400_CLKDIV1_UHOST_SHIFT, - .reg_divider = S3C_CLK_DIV1, -}; - -static struct clksrc_clk clk_uart_uclk1 = { - .clk = { - .name = "uclk1", - .id = -1, - .ctrlbit = S3C_CLKCON_SCLK_UART, - .enable = s3c64xx_sclk_ctrl, - .set_parent = s3c64xx_setparent_clksrc, - .get_rate = s3c64xx_getrate_clksrc, - .set_rate = s3c64xx_setrate_clksrc, - .round_rate = s3c64xx_roundrate_clksrc, - }, - .shift = S3C6400_CLKSRC_UART_SHIFT, - .mask = S3C6400_CLKSRC_UART_MASK, - .sources = &clkset_uart, - .divider_shift = S3C6400_CLKDIV2_UART_SHIFT, - .reg_divider = S3C_CLK_DIV2, -}; - -/* Where does UCLK0 come from? */ - -static struct clksrc_clk clk_spi0 = { - .clk = { - .name = "spi-bus", - .id = 0, - .ctrlbit = S3C_CLKCON_SCLK_SPI0, - .enable = s3c64xx_sclk_ctrl, - .set_parent = s3c64xx_setparent_clksrc, - .get_rate = s3c64xx_getrate_clksrc, - .set_rate = s3c64xx_setrate_clksrc, - .round_rate = s3c64xx_roundrate_clksrc, - }, - .shift = S3C6400_CLKSRC_SPI0_SHIFT, - .mask = S3C6400_CLKSRC_SPI0_MASK, - .sources = &clkset_spi_mmc, - .divider_shift = S3C6400_CLKDIV2_SPI0_SHIFT, - .reg_divider = S3C_CLK_DIV2, -}; - -static struct clksrc_clk clk_spi1 = { - .clk = { - .name = "spi-bus", - .id = 1, - .ctrlbit = S3C_CLKCON_SCLK_SPI1, - .enable = s3c64xx_sclk_ctrl, - .set_parent = s3c64xx_setparent_clksrc, - .get_rate = s3c64xx_getrate_clksrc, - .set_rate = s3c64xx_setrate_clksrc, - .round_rate = s3c64xx_roundrate_clksrc, - }, - .shift = S3C6400_CLKSRC_SPI1_SHIFT, - .mask = S3C6400_CLKSRC_SPI1_MASK, - .sources = &clkset_spi_mmc, - .divider_shift = S3C6400_CLKDIV2_SPI1_SHIFT, - .reg_divider = S3C_CLK_DIV2, -}; +/* clocks that feed other parts of the clock source tree */ static struct clk clk_iis_cd0 = { .name = "iis_cdclk0", @@ -505,29 +278,11 @@ static struct clk *clkset_audio0_list[] = { [4] = &clk_pcm_cd, }; -static struct clk_sources clkset_audio0 = { +static struct clksrc_sources clkset_audio0 = { .sources = clkset_audio0_list, .nr_sources = ARRAY_SIZE(clkset_audio0_list), }; -static struct clksrc_clk clk_audio0 = { - .clk = { - .name = "audio-bus", - .id = 0, - .ctrlbit = S3C_CLKCON_SCLK_AUDIO0, - .enable = s3c64xx_sclk_ctrl, - .set_parent = s3c64xx_setparent_clksrc, - .get_rate = s3c64xx_getrate_clksrc, - .set_rate = s3c64xx_setrate_clksrc, - .round_rate = s3c64xx_roundrate_clksrc, - }, - .shift = S3C6400_CLKSRC_AUDIO0_SHIFT, - .mask = S3C6400_CLKSRC_AUDIO0_MASK, - .sources = &clkset_audio0, - .divider_shift = S3C6400_CLKDIV2_AUDIO0_SHIFT, - .reg_divider = S3C_CLK_DIV2, -}; - static struct clk *clkset_audio1_list[] = { [0] = &clk_mout_epll.clk, [1] = &clk_dout_mpll, @@ -536,72 +291,133 @@ static struct clk *clkset_audio1_list[] = { [4] = &clk_pcm_cd, }; -static struct clk_sources clkset_audio1 = { +static struct clksrc_sources clkset_audio1 = { .sources = clkset_audio1_list, .nr_sources = ARRAY_SIZE(clkset_audio1_list), }; -static struct clksrc_clk clk_audio1 = { - .clk = { - .name = "audio-bus", - .id = 1, - .ctrlbit = S3C_CLKCON_SCLK_AUDIO1, - .enable = s3c64xx_sclk_ctrl, - .set_parent = s3c64xx_setparent_clksrc, - .get_rate = s3c64xx_getrate_clksrc, - .set_rate = s3c64xx_setrate_clksrc, - .round_rate = s3c64xx_roundrate_clksrc, - }, - .shift = S3C6400_CLKSRC_AUDIO1_SHIFT, - .mask = S3C6400_CLKSRC_AUDIO1_MASK, - .sources = &clkset_audio1, - .divider_shift = S3C6400_CLKDIV2_AUDIO1_SHIFT, - .reg_divider = S3C_CLK_DIV2, -}; - -static struct clksrc_clk clk_irda = { - .clk = { - .name = "irda-bus", - .id = 0, - .ctrlbit = S3C_CLKCON_SCLK_IRDA, - .enable = s3c64xx_sclk_ctrl, - .set_parent = s3c64xx_setparent_clksrc, - .get_rate = s3c64xx_getrate_clksrc, - .set_rate = s3c64xx_setrate_clksrc, - .round_rate = s3c64xx_roundrate_clksrc, - }, - .shift = S3C6400_CLKSRC_IRDA_SHIFT, - .mask = S3C6400_CLKSRC_IRDA_MASK, - .sources = &clkset_irda, - .divider_shift = S3C6400_CLKDIV2_IRDA_SHIFT, - .reg_divider = S3C_CLK_DIV2, -}; - static struct clk *clkset_camif_list[] = { &clk_h2, }; -static struct clk_sources clkset_camif = { +static struct clksrc_sources clkset_camif = { .sources = clkset_camif_list, .nr_sources = ARRAY_SIZE(clkset_camif_list), }; -static struct clksrc_clk clk_camif = { - .clk = { - .name = "camera", - .id = -1, - .ctrlbit = S3C_CLKCON_SCLK_CAM, - .enable = s3c64xx_sclk_ctrl, - .set_parent = s3c64xx_setparent_clksrc, - .get_rate = s3c64xx_getrate_clksrc, - .set_rate = s3c64xx_setrate_clksrc, - .round_rate = s3c64xx_roundrate_clksrc, +static struct clksrc_clk clksrcs[] = { + { + .clk = { + .name = "mmc_bus", + .id = 0, + .ctrlbit = S3C_CLKCON_SCLK_MMC0, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 18, .size = 2 }, + .reg_div = { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4 }, + .sources = &clkset_spi_mmc, + }, { + .clk = { + .name = "mmc_bus", + .id = 1, + .ctrlbit = S3C_CLKCON_SCLK_MMC1, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 20, .size = 2 }, + .reg_div = { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4 }, + .sources = &clkset_spi_mmc, + }, { + .clk = { + .name = "mmc_bus", + .id = 2, + .ctrlbit = S3C_CLKCON_SCLK_MMC2, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 22, .size = 2 }, + .reg_div = { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4 }, + .sources = &clkset_spi_mmc, + }, { + .clk = { + .name = "usb-bus-host", + .id = -1, + .ctrlbit = S3C_CLKCON_SCLK_UHOST, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 5, .size = 2 }, + .reg_div = { .reg = S3C_CLK_DIV1, .shift = 20, .size = 4 }, + .sources = &clkset_uhost, + }, { + .clk = { + .name = "uclk1", + .id = -1, + .ctrlbit = S3C_CLKCON_SCLK_UART, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1 }, + .reg_div = { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4 }, + .sources = &clkset_uart, + }, { +/* Where does UCLK0 come from? */ + .clk = { + .name = "spi-bus", + .id = 0, + .ctrlbit = S3C_CLKCON_SCLK_SPI0, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 }, + .reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 }, + .sources = &clkset_spi_mmc, + }, { + .clk = { + .name = "spi-bus", + .id = 1, + .ctrlbit = S3C_CLKCON_SCLK_SPI1, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 }, + .reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 }, + .sources = &clkset_spi_mmc, + }, { + .clk = { + .name = "audio-bus", + .id = 0, + .ctrlbit = S3C_CLKCON_SCLK_AUDIO0, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 7, .size = 3 }, + .reg_div = { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4 }, + .sources = &clkset_audio0, + }, { + .clk = { + .name = "audio-bus", + .id = 1, + .ctrlbit = S3C_CLKCON_SCLK_AUDIO1, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 10, .size = 3 }, + .reg_div = { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4 }, + .sources = &clkset_audio1, + }, { + .clk = { + .name = "irda-bus", + .id = 0, + .ctrlbit = S3C_CLKCON_SCLK_IRDA, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 24, .size = 2 }, + .reg_div = { .reg = S3C_CLK_DIV2, .shift = 20, .size = 4 }, + .sources = &clkset_irda, + }, { + .clk = { + .name = "camera", + .id = -1, + .ctrlbit = S3C_CLKCON_SCLK_CAM, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_div = { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4 }, + .reg_src = { .reg = NULL, .shift = 0, .size = 0 }, + .sources = &clkset_camif, }, - .shift = 0, - .mask = 0, - .sources = &clkset_camif, - .divider_shift = S3C6400_CLKDIV0_CAM_SHIFT, - .reg_divider = S3C_CLK_DIV0, }; /* Clock initialisation code */ @@ -610,39 +426,7 @@ static struct clksrc_clk *init_parents[] = { &clk_mout_apll, &clk_mout_epll, &clk_mout_mpll, - &clk_mmc0, - &clk_mmc1, - &clk_mmc2, - &clk_usbhost, - &clk_uart_uclk1, - &clk_spi0, - &clk_spi1, - &clk_audio0, - &clk_audio1, - &clk_irda, - &clk_camif, -}; - -static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk) -{ - struct clk_sources *srcs = clk->sources; - u32 clksrc = __raw_readl(S3C_CLK_SRC); - - clksrc &= clk->mask; - clksrc >>= clk->shift; - - if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) { - printk(KERN_ERR "%s: bad source %d\n", - clk->clk.name, clksrc); - return; - } - - clk->clk.parent = srcs->sources[clksrc]; - - printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n", - clk->clk.name, clk->clk.parent->name, clksrc, - clk_get_rate(&clk->clk)); -} +}; #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) @@ -702,7 +486,10 @@ void __init_or_cpufreq s3c6400_setup_clocks(void) clk_f.rate = fclk; for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) - s3c6400_set_clksrc(init_parents[ptr]); + s3c_set_clksrc(init_parents[ptr], true); + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_set_clksrc(&clksrcs[ptr], true); } static struct clk *clks[] __initdata = { @@ -713,17 +500,6 @@ static struct clk *clks[] __initdata = { &clk_mout_epll.clk, &clk_mout_mpll.clk, &clk_dout_mpll, - &clk_mmc0.clk, - &clk_mmc1.clk, - &clk_mmc2.clk, - &clk_usbhost.clk, - &clk_uart_uclk1.clk, - &clk_spi0.clk, - &clk_spi1.clk, - &clk_audio0.clk, - &clk_audio1.clk, - &clk_irda.clk, - &clk_camif.clk, &clk_arm, }; @@ -755,4 +531,6 @@ void __init s3c6400_register_clocks(unsigned armclk_divlimit) clkp->name, ret); } } + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); } diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig new file mode 100644 index 00000000000..e7c31e7060e --- /dev/null +++ b/arch/arm/plat-s5p/Kconfig @@ -0,0 +1,42 @@ +# arch/arm/plat-s5p/Kconfig +# +# Copyright (c) 2009 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +config PLAT_S5P + bool + depends on ARCH_S5P6440 + default y + select PLAT_S3C + select ARM_VIC + select NO_IOPORT + select ARCH_REQUIRE_GPIOLIB + select S3C_GPIO_TRACK + select SAMSUNG_GPIOLIB_4BIT + select S3C_GPIO_CFG_S3C64XX + select S3C_GPIO_PULL_UPDOWN + select S3C_GPIO_CFG_S3C24XX + select PLAT_SAMSUNG + select SAMSUNG_CLKSRC + select SAMSUNG_IRQ_VIC_TIMER + select SAMSUNG_IRQ_UART + help + Base platform code for Samsung's S5P series SoC. + +if (PLAT_S5P && ARCH_S5P6440) + +# Configuration options shared by all S5P64XX implementations + +config CPU_S5P6440_INIT + bool + help + Initialisation code for the S5P6440. + +config CPU_S5P6440_CLOCK + bool + help + Clock support code for the S5P6440. + +endif diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile new file mode 100644 index 00000000000..92b64745054 --- /dev/null +++ b/arch/arm/plat-s5p/Makefile @@ -0,0 +1,24 @@ +# arch/arm/plat-s5p/Makefile +# +# Copyright (c) 2009 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := dummy.o +obj- := + +# Core files + +obj-y += dev-uart.o +obj-y += cpu.o +obj-y += clock.o +obj-y += irq.o +obj-y += setup-i2c0.o + +# CPU support + +obj-$(CONFIG_CPU_S5P6440_INIT) += s5p6440-init.o +obj-$(CONFIG_CPU_S5P6440_CLOCK) += s5p6440-clock.o diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c new file mode 100644 index 00000000000..3d3c0f1934f --- /dev/null +++ b/arch/arm/plat-s5p/clock.c @@ -0,0 +1,136 @@ +/* linux/arch/arm/plat-s5p/clock.c + * + * Copyright 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P - Common clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/sysdev.h> +#include <linux/io.h> +#include <asm/div64.h> + +#include <plat/clock.h> +#include <plat/clock-clksrc.h> +#include <plat/s5p-clock.h> + +/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call + * clk_ext_xtal_mux. +*/ +struct clk clk_ext_xtal_mux = { + .name = "ext_xtal", + .id = -1, +}; + +/* 48MHz USB Phy clock output */ +struct clk clk_48m = { + .name = "clk_48m", + .id = -1, + .rate = 48000000, +}; + +/* APLL clock output + * No need .ctrlbit, this is always on +*/ +struct clk clk_fout_apll = { + .name = "fout_apll", + .id = -1, +}; + +/* MPLL clock output + * No need .ctrlbit, this is always on +*/ +struct clk clk_fout_mpll = { + .name = "fout_mpll", + .id = -1, +}; + +/* EPLL clock output */ +struct clk clk_fout_epll = { + .name = "fout_epll", + .id = -1, + .ctrlbit = (1 << 31), +}; + +/* ARM clock */ +struct clk clk_arm = { + .name = "armclk", + .id = -1, + .rate = 0, + .ctrlbit = 0, +}; + +/* Possible clock sources for APLL Mux */ +static struct clk *clk_src_apll_list[] = { + [0] = &clk_fin_apll, + [1] = &clk_fout_apll, +}; + +struct clksrc_sources clk_src_apll = { + .sources = clk_src_apll_list, + .nr_sources = ARRAY_SIZE(clk_src_apll_list), +}; + +/* Possible clock sources for MPLL Mux */ +static struct clk *clk_src_mpll_list[] = { + [0] = &clk_fin_mpll, + [1] = &clk_fout_mpll, +}; + +struct clksrc_sources clk_src_mpll = { + .sources = clk_src_mpll_list, + .nr_sources = ARRAY_SIZE(clk_src_mpll_list), +}; + +/* Possible clock sources for EPLL Mux */ +static struct clk *clk_src_epll_list[] = { + [0] = &clk_fin_epll, + [1] = &clk_fout_epll, +}; + +struct clksrc_sources clk_src_epll = { + .sources = clk_src_epll_list, + .nr_sources = ARRAY_SIZE(clk_src_epll_list), +}; + +int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable) +{ + unsigned int ctrlbit = clk->ctrlbit; + u32 con; + + con = __raw_readl(reg); + con = enable ? (con | ctrlbit) : (con & ~ctrlbit); + __raw_writel(con, reg); + return 0; +} + +static struct clk *s5p_clks[] __initdata = { + &clk_ext_xtal_mux, + &clk_48m, + &clk_fout_apll, + &clk_fout_mpll, + &clk_fout_epll, + &clk_arm, +}; + +void __init s5p_register_clocks(unsigned long xtal_freq) +{ + int ret; + + clk_ext_xtal_mux.rate = xtal_freq; + + ret = s3c24xx_register_clocks(s5p_clks, ARRAY_SIZE(s5p_clks)); + if (ret > 0) + printk(KERN_ERR "Failed to register s5p clocks\n"); +} diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c new file mode 100644 index 00000000000..0895a77a283 --- /dev/null +++ b/arch/arm/plat-s5p/cpu.c @@ -0,0 +1,90 @@ +/* linux/arch/arm/plat-s5p/cpu.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P CPU Support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <mach/map.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/regs-clock.h> +#include <plat/cpu.h> +#include <plat/s5p6440.h> + +/* table of supported CPUs */ + +static const char name_s5p6440[] = "S5P6440"; + +static struct cpu_table cpu_ids[] __initdata = { + { + .idcode = 0x56440100, + .idmask = 0xffffff00, + .map_io = s5p6440_map_io, + .init_clocks = s5p6440_init_clocks, + .init_uarts = s5p6440_init_uarts, + .init = s5p6440_init, + .name = name_s5p6440, + }, +}; + +/* minimal IO mapping */ + +#define UART_OFFS (S5P_PA_UART & 0xfffff) + +static struct map_desc s5p_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSCON, + .pfn = __phys_to_pfn(S5P_PA_SYSCON), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)(S5P_VA_UART + UART_OFFS), + .pfn = __phys_to_pfn(S5P_PA_UART), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_VIC0, + .pfn = __phys_to_pfn(S5P_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_VIC1, + .pfn = __phys_to_pfn(S5P_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_TIMER, + .pfn = __phys_to_pfn(S5P_PA_TIMER), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5P_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +/* read cpu identification code */ + +void __init s5p_init_io(struct map_desc *mach_desc, + int size, void __iomem *cpuid_addr) +{ + unsigned long idcode; + + /* initialize the io descriptors we need for initialization */ + iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc)); + if (mach_desc) + iotable_init(mach_desc, size); + + idcode = __raw_readl(cpuid_addr); + s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids)); +} diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c new file mode 100644 index 00000000000..23c75316d49 --- /dev/null +++ b/arch/arm/plat-s5p/dev-uart.c @@ -0,0 +1,137 @@ +/* linux/arch/arm/plat-s5p/dev-uart.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Base S5P UART resource and device definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/platform_device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/irq.h> +#include <mach/hardware.h> +#include <mach/map.h> + +#include <plat/devs.h> + + /* Serial port registrations */ + +static struct resource s5p_uart0_resource[] = { + [0] = { + .start = S5P_PA_UART0, + .end = S5P_PA_UART0 + S5P_SZ_UART, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S5P_UART_RX0, + .end = IRQ_S5P_UART_RX0, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S5P_UART_TX0, + .end = IRQ_S5P_UART_TX0, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_S5P_UART_ERR0, + .end = IRQ_S5P_UART_ERR0, + .flags = IORESOURCE_IRQ, + } +}; + +static struct resource s5p_uart1_resource[] = { + [0] = { + .start = S5P_PA_UART1, + .end = S5P_PA_UART1 + S5P_SZ_UART, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S5P_UART_RX1, + .end = IRQ_S5P_UART_RX1, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S5P_UART_TX1, + .end = IRQ_S5P_UART_TX1, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_S5P_UART_ERR1, + .end = IRQ_S5P_UART_ERR1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource s5p_uart2_resource[] = { + [0] = { + .start = S5P_PA_UART2, + .end = S5P_PA_UART2 + S5P_SZ_UART, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S5P_UART_RX2, + .end = IRQ_S5P_UART_RX2, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S5P_UART_TX2, + .end = IRQ_S5P_UART_TX2, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_S5P_UART_ERR2, + .end = IRQ_S5P_UART_ERR2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource s5p_uart3_resource[] = { + [0] = { + .start = S5P_PA_UART3, + .end = S5P_PA_UART3 + S5P_SZ_UART, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S5P_UART_RX3, + .end = IRQ_S5P_UART_RX3, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S5P_UART_TX3, + .end = IRQ_S5P_UART_TX3, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_S5P_UART_ERR3, + .end = IRQ_S5P_UART_ERR3, + .flags = IORESOURCE_IRQ, + }, +}; + +struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = { + [0] = { + .resources = s5p_uart0_resource, + .nr_resources = ARRAY_SIZE(s5p_uart0_resource), + }, + [1] = { + .resources = s5p_uart1_resource, + .nr_resources = ARRAY_SIZE(s5p_uart1_resource), + }, + [2] = { + .resources = s5p_uart2_resource, + .nr_resources = ARRAY_SIZE(s5p_uart2_resource), + }, + [3] = { + .resources = s5p_uart3_resource, + .nr_resources = ARRAY_SIZE(s5p_uart3_resource), + }, +}; diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h new file mode 100644 index 00000000000..5d7937dddad --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/irqs.h @@ -0,0 +1,83 @@ +/* linux/arch/arm/plat-s5p/include/plat/irqs.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P Common IRQ support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_S5P_IRQS_H +#define __ASM_PLAT_S5P_IRQS_H __FILE__ + +/* we keep the first set of CPU IRQs out of the range of + * the ISA space, so that the PC104 has them to itself + * and we don't end up having to do horrible things to the + * standard ISA drivers.... + * + * note, since we're using the VICs, our start must be a + * mulitple of 32 to allow the common code to work + */ + +#define S5P_IRQ_OFFSET (32) + +#define S5P_IRQ(x) ((x) + S5P_IRQ_OFFSET) + +#define S5P_VIC0_BASE S5P_IRQ(0) +#define S5P_VIC1_BASE S5P_IRQ(32) + +#define IRQ_VIC0_BASE S5P_VIC0_BASE +#define IRQ_VIC1_BASE S5P_VIC1_BASE + +/* UART interrupts, each UART has 4 intterupts per channel so + * use the space between the ISA and S3C main interrupts. Note, these + * are not in the same order as the S3C24XX series! */ + +#define IRQ_S5P_UART_BASE0 (16) +#define IRQ_S5P_UART_BASE1 (20) +#define IRQ_S5P_UART_BASE2 (24) +#define IRQ_S5P_UART_BASE3 (28) + +#define UART_IRQ_RXD (0) +#define UART_IRQ_ERR (1) +#define UART_IRQ_TXD (2) + +#define IRQ_S5P_UART_RX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_RXD) +#define IRQ_S5P_UART_TX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_TXD) +#define IRQ_S5P_UART_ERR0 (IRQ_S5P_UART_BASE0 + UART_IRQ_ERR) + +#define IRQ_S5P_UART_RX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_RXD) +#define IRQ_S5P_UART_TX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_TXD) +#define IRQ_S5P_UART_ERR1 (IRQ_S5P_UART_BASE1 + UART_IRQ_ERR) + +#define IRQ_S5P_UART_RX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_RXD) +#define IRQ_S5P_UART_TX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_TXD) +#define IRQ_S5P_UART_ERR2 (IRQ_S5P_UART_BASE2 + UART_IRQ_ERR) + +#define IRQ_S5P_UART_RX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_RXD) +#define IRQ_S5P_UART_TX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_TXD) +#define IRQ_S5P_UART_ERR3 (IRQ_S5P_UART_BASE3 + UART_IRQ_ERR) + +/* S3C compatibilty defines */ +#define IRQ_S3CUART_RX0 IRQ_S5P_UART_RX0 +#define IRQ_S3CUART_RX1 IRQ_S5P_UART_RX1 +#define IRQ_S3CUART_RX2 IRQ_S5P_UART_RX2 +#define IRQ_S3CUART_RX3 IRQ_S5P_UART_RX3 + +/* VIC based IRQs */ + +#define S5P_IRQ_VIC0(x) (S5P_VIC0_BASE + (x)) +#define S5P_IRQ_VIC1(x) (S5P_VIC1_BASE + (x)) + +#define S5P_TIMER_IRQ(x) S5P_IRQ(64 + (x)) + +#define IRQ_TIMER0 S5P_TIMER_IRQ(0) +#define IRQ_TIMER1 S5P_TIMER_IRQ(1) +#define IRQ_TIMER2 S5P_TIMER_IRQ(2) +#define IRQ_TIMER3 S5P_TIMER_IRQ(3) +#define IRQ_TIMER4 S5P_TIMER_IRQ(4) + +#endif /* __ASM_PLAT_S5P_IRQS_H */ diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h new file mode 100644 index 00000000000..d48325bb29e --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/pll.h @@ -0,0 +1,83 @@ +/* arch/arm/plat-s5p/include/plat/pll.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P PLL code + * + * Based on arch/arm/plat-s3c64xx/include/plat/pll.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define PLL45XX_MDIV_MASK (0x3FF) +#define PLL45XX_PDIV_MASK (0x3F) +#define PLL45XX_SDIV_MASK (0x7) +#define PLL45XX_MDIV_SHIFT (16) +#define PLL45XX_PDIV_SHIFT (8) +#define PLL45XX_SDIV_SHIFT (0) + +#include <asm/div64.h> + +enum pll45xx_type_t { + pll_4500, + pll_4502, + pll_4508 +}; + +static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con, + enum pll45xx_type_t pll_type) +{ + u32 mdiv, pdiv, sdiv; + u64 fvco = baseclk; + + mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK; + pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK; + sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK; + + if (pll_type == pll_4508) + sdiv = sdiv - 1; + + fvco *= mdiv; + do_div(fvco, (pdiv << sdiv)); + + return (unsigned long)fvco; +} + +#define PLL90XX_MDIV_MASK (0xFF) +#define PLL90XX_PDIV_MASK (0x3F) +#define PLL90XX_SDIV_MASK (0x7) +#define PLL90XX_KDIV_MASK (0xffff) +#define PLL90XX_MDIV_SHIFT (16) +#define PLL90XX_PDIV_SHIFT (8) +#define PLL90XX_SDIV_SHIFT (0) +#define PLL90XX_KDIV_SHIFT (0) + +static inline unsigned long s5p_get_pll90xx(unsigned long baseclk, + u32 pll_con, u32 pll_conk) +{ + unsigned long result; + u32 mdiv, pdiv, sdiv, kdiv; + u64 tmp; + + mdiv = (pll_con >> PLL90XX_MDIV_SHIFT) & PLL90XX_MDIV_MASK; + pdiv = (pll_con >> PLL90XX_PDIV_SHIFT) & PLL90XX_PDIV_MASK; + sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK; + kdiv = pll_conk & PLL90XX_KDIV_MASK; + + /* We need to multiple baseclk by mdiv (the integer part) and kdiv + * which is in 2^16ths, so shift mdiv up (does not overflow) and + * add kdiv before multiplying. The use of tmp is to avoid any + * overflows before shifting bac down into result when multipling + * by the mdiv and kdiv pair. + */ + + tmp = baseclk; + tmp *= (mdiv << 16) + kdiv; + do_div(tmp, (pdiv << sdiv)); + result = tmp >> 16; + + return result; +} diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h new file mode 100644 index 00000000000..e1a7444b882 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/s5p-clock.h @@ -0,0 +1,38 @@ +/* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h + * + * Copyright 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Header file for s5p clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_S5P_CLOCK_H +#define __ASM_PLAT_S5P_CLOCK_H __FILE__ + +#include <linux/clk.h> + +#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) + +#define clk_fin_apll clk_ext_xtal_mux +#define clk_fin_mpll clk_ext_xtal_mux +#define clk_fin_epll clk_ext_xtal_mux + +extern struct clk clk_ext_xtal_mux; +extern struct clk clk_48m; +extern struct clk clk_fout_apll; +extern struct clk clk_fout_mpll; +extern struct clk clk_fout_epll; +extern struct clk clk_arm; + +extern struct clksrc_sources clk_src_apll; +extern struct clksrc_sources clk_src_mpll; +extern struct clksrc_sources clk_src_epll; + +extern int s5p6440_clk48m_ctrl(struct clk *clk, int enable); +extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable); + +#endif /* __ASM_PLAT_S5P_CLOCK_H */ diff --git a/arch/arm/plat-s5p/include/plat/s5p6440.h b/arch/arm/plat-s5p/include/plat/s5p6440.h new file mode 100644 index 00000000000..a4cd75afeb3 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/s5p6440.h @@ -0,0 +1,37 @@ +/* arch/arm/plat-s5p/include/plat/s5p6440.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Header file for s5p6440 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + + /* Common init code for S5P6440 related SoCs */ + +extern void s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s5p6440_register_clocks(void); +extern void s5p6440_setup_clocks(void); + +#ifdef CONFIG_CPU_S5P6440 + +extern int s5p6440_init(void); +extern void s5p6440_init_irq(void); +extern void s5p6440_map_io(void); +extern void s5p6440_init_clocks(int xtal); + +#define s5p6440_init_uarts s5p6440_common_init_uarts + +#else +#define s5p6440_init_clocks NULL +#define s5p6440_init_uarts NULL +#define s5p6440_map_io NULL +#define s5p6440_init NULL +#endif + +/* S5P6440 timer */ + +extern struct sys_timer s5p6440_timer; diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-s5p/irq.c new file mode 100644 index 00000000000..eada40d0847 --- /dev/null +++ b/arch/arm/plat-s5p/irq.c @@ -0,0 +1,73 @@ +/* arch/arm/plat-s5p/irq.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P - Interrupt handling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <asm/hardware/vic.h> + +#include <linux/serial_core.h> +#include <mach/map.h> +#include <plat/regs-timer.h> +#include <plat/regs-serial.h> +#include <plat/cpu.h> +#include <plat/irq-vic-timer.h> +#include <plat/irq-uart.h> + +#define VIC_VAADDR(no) (S5P_VA_VIC0 + ((no)*0x10000)) +#define VIC_BASE(no) (S5P_VIC0_BASE + ((no)*32)) + +/* + * Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3] + * are consecutive when looking up the interrupt in the demux routines. + */ +static struct s3c_uart_irq uart_irqs[] = { + [0] = { + .regs = S5P_VA_UART0, + .base_irq = IRQ_S5P_UART_BASE0, + .parent_irq = IRQ_UART0, + }, + [1] = { + .regs = S5P_VA_UART1, + .base_irq = IRQ_S5P_UART_BASE1, + .parent_irq = IRQ_UART1, + }, + [2] = { + .regs = S5P_VA_UART2, + .base_irq = IRQ_S5P_UART_BASE2, + .parent_irq = IRQ_UART2, + }, + [3] = { + .regs = S5P_VA_UART3, + .base_irq = IRQ_S5P_UART_BASE3, + .parent_irq = IRQ_UART3, + }, +}; + +void __init s5p_init_irq(u32 *vic, u32 num_vic) +{ + int irq; + + /* initialize the VICs */ + for (irq = 0; irq < num_vic; irq++) + vic_init(VIC_VAADDR(irq), VIC_BASE(irq), vic[irq], 0); + + s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0); + s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1); + s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2); + s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3); + s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4); + + s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs)); +} diff --git a/arch/arm/plat-s5p/s5p6440-clock.c b/arch/arm/plat-s5p/s5p6440-clock.c new file mode 100644 index 00000000000..2f412f8c121 --- /dev/null +++ b/arch/arm/plat-s5p/s5p6440-clock.c @@ -0,0 +1,698 @@ +/* linux/arch/arm/plat-s5p/s5p6440-clock.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/map.h> + +#include <plat/cpu-freq.h> +#include <mach/regs-clock.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/clock-clksrc.h> +#include <plat/s5p-clock.h> +#include <plat/pll.h> +#include <plat/s5p6440.h> + +/* APLL Mux output clock */ +static struct clksrc_clk clk_mout_apll = { + .clk = { + .name = "mout_apll", + .id = -1, + }, + .sources = &clk_src_apll, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, +}; + +static int s5p6440_epll_enable(struct clk *clk, int enable) +{ + unsigned int ctrlbit = clk->ctrlbit; + unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit; + + if (enable) + __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON); + else + __raw_writel(epll_con, S5P_EPLL_CON); + + return 0; +} + +static unsigned long s5p6440_epll_get_rate(struct clk *clk) +{ + return clk->rate; +} + +static u32 epll_div[][5] = { + { 36000000, 0, 48, 1, 4 }, + { 48000000, 0, 32, 1, 3 }, + { 60000000, 0, 40, 1, 3 }, + { 72000000, 0, 48, 1, 3 }, + { 84000000, 0, 28, 1, 2 }, + { 96000000, 0, 32, 1, 2 }, + { 32768000, 45264, 43, 1, 4 }, + { 45158000, 6903, 30, 1, 3 }, + { 49152000, 50332, 32, 1, 3 }, + { 67738000, 10398, 45, 1, 3 }, + { 73728000, 9961, 49, 1, 3 } +}; + +static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int epll_con, epll_con_k; + unsigned int i; + + if (clk->rate == rate) /* Return if nothing changed */ + return 0; + + epll_con = __raw_readl(S5P_EPLL_CON); + epll_con_k = __raw_readl(S5P_EPLL_CON_K); + + epll_con_k &= ~(PLL90XX_KDIV_MASK); + epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK); + + for (i = 0; i < ARRAY_SIZE(epll_div); i++) { + if (epll_div[i][0] == rate) { + epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT); + epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) | + (epll_div[i][3] << PLL90XX_PDIV_SHIFT) | + (epll_div[i][4] << PLL90XX_SDIV_SHIFT); + break; + } + } + + if (i == ARRAY_SIZE(epll_div)) { + printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__); + return -EINVAL; + } + + __raw_writel(epll_con, S5P_EPLL_CON); + __raw_writel(epll_con_k, S5P_EPLL_CON_K); + + clk->rate = rate; + + return 0; +} + +static struct clk_ops s5p6440_epll_ops = { + .get_rate = s5p6440_epll_get_rate, + .set_rate = s5p6440_epll_set_rate, +}; + +static struct clksrc_clk clk_mout_epll = { + .clk = { + .name = "mout_epll", + .id = -1, + }, + .sources = &clk_src_epll, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 2, .size = 1 }, +}; + +static struct clksrc_clk clk_mout_mpll = { + .clk = { + .name = "mout_mpll", + .id = -1, + }, + .sources = &clk_src_mpll, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 1, .size = 1 }, +}; + +static struct clk clk_h_low = { + .name = "hclk_low", + .id = -1, + .rate = 0, + .parent = NULL, + .ctrlbit = 0, + .ops = &clk_ops_def_setrate, +}; + +static struct clk clk_p_low = { + .name = "pclk_low", + .id = -1, + .rate = 0, + .parent = NULL, + .ctrlbit = 0, + .ops = &clk_ops_def_setrate, +}; + +enum perf_level { + L0 = 532*1000, + L1 = 266*1000, + L2 = 133*1000, +}; + +static const u32 clock_table[][3] = { + /*{ARM_CLK, DIVarm, DIVhclk}*/ + {L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P_CLKDIV0_HCLK_SHIFT)}, + {L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P_CLKDIV0_HCLK_SHIFT)}, + {L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P_CLKDIV0_HCLK_SHIFT)}, +}; + +static unsigned long s5p6440_armclk_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + u32 clkdiv; + + /* divisor mask starts at bit0, so no need to shift */ + clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK; + + return rate / (clkdiv + 1); +} + +static unsigned long s5p6440_armclk_round_rate(struct clk *clk, + unsigned long rate) +{ + u32 iter; + + for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) { + if (rate > clock_table[iter][0]) + return clock_table[iter-1][0]; + } + + return clock_table[ARRAY_SIZE(clock_table) - 1][0]; +} + +static int s5p6440_armclk_set_rate(struct clk *clk, unsigned long rate) +{ + u32 round_tmp; + u32 iter; + u32 clk_div0_tmp; + u32 cur_rate = clk->ops->get_rate(clk); + unsigned long flags; + + round_tmp = clk->ops->round_rate(clk, rate); + if (round_tmp == cur_rate) + return 0; + + + for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) { + if (round_tmp == clock_table[iter][0]) + break; + } + + if (iter >= ARRAY_SIZE(clock_table)) + iter = ARRAY_SIZE(clock_table) - 1; + + local_irq_save(flags); + if (cur_rate > round_tmp) { + /* Frequency Down */ + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); + clk_div0_tmp |= clock_table[iter][1]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & + ~(S5P_CLKDIV0_HCLK_MASK); + clk_div0_tmp |= clock_table[iter][2]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + + + } else { + /* Frequency Up */ + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & + ~(S5P_CLKDIV0_HCLK_MASK); + clk_div0_tmp |= clock_table[iter][2]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); + clk_div0_tmp |= clock_table[iter][1]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + } + local_irq_restore(flags); + + clk->rate = clock_table[iter][0]; + + return 0; +} + +static struct clk_ops s5p6440_clkarm_ops = { + .get_rate = s5p6440_armclk_get_rate, + .set_rate = s5p6440_armclk_set_rate, + .round_rate = s5p6440_armclk_round_rate, +}; + +static unsigned long s5p6440_clk_doutmpll_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + + if (__raw_readl(S5P_CLK_DIV0) & S5P_CLKDIV0_MPLL_MASK) + rate /= 2; + + return rate; +} + +static struct clk clk_dout_mpll = { + .name = "dout_mpll", + .id = -1, + .parent = &clk_mout_mpll.clk, + .ops = &(struct clk_ops) { + .get_rate = s5p6440_clk_doutmpll_get_rate, + }, +}; + +int s5p6440_clk48m_ctrl(struct clk *clk, int enable) +{ + unsigned long flags; + u32 val; + + /* can't rely on clock lock, this register has other usages */ + local_irq_save(flags); + + val = __raw_readl(S5P_OTHERS); + if (enable) + val |= S5P_OTHERS_USB_SIG_MASK; + else + val &= ~S5P_OTHERS_USB_SIG_MASK; + + __raw_writel(val, S5P_OTHERS); + + local_irq_restore(flags); + + return 0; +} + +static int s5p6440_pclk_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLK_GATE_PCLK, clk, enable); +} + +static int s5p6440_hclk0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLK_GATE_HCLK0, clk, enable); +} + +static int s5p6440_hclk1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLK_GATE_HCLK1, clk, enable); +} + +static int s5p6440_sclk_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLK_GATE_SCLK0, clk, enable); +} + +static int s5p6440_mem_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLK_GATE_MEM0, clk, enable); +} + +/* + * The following clocks will be disabled during clock initialization. It is + * recommended to keep the following clocks disabled until the driver requests + * for enabling the clock. + */ +static struct clk init_clocks_disable[] = { + { + .name = "nand", + .id = -1, + .parent = &clk_h, + .enable = s5p6440_mem_ctrl, + .ctrlbit = S5P_CLKCON_MEM0_HCLK_NFCON, + }, { + .name = "adc", + .id = -1, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_TSADC, + }, { + .name = "i2c", + .id = -1, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_IIC0, + }, { + .name = "i2s_v40", + .id = 0, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_IIS2, + }, { + .name = "spi", + .id = 0, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_SPI0, + }, { + .name = "spi", + .id = 1, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_SPI1, + }, { + .name = "sclk_spi_48", + .id = 0, + .parent = &clk_48m, + .enable = s5p6440_sclk_ctrl, + .ctrlbit = S5P_CLKCON_SCLK0_SPI0_48, + }, { + .name = "sclk_spi_48", + .id = 1, + .parent = &clk_48m, + .enable = s5p6440_sclk_ctrl, + .ctrlbit = S5P_CLKCON_SCLK0_SPI1_48, + }, { + .name = "mmc_48m", + .id = 0, + .parent = &clk_48m, + .enable = s5p6440_sclk_ctrl, + .ctrlbit = S5P_CLKCON_SCLK0_MMC0_48, + }, { + .name = "mmc_48m", + .id = 1, + .parent = &clk_48m, + .enable = s5p6440_sclk_ctrl, + .ctrlbit = S5P_CLKCON_SCLK0_MMC1_48, + }, { + .name = "mmc_48m", + .id = 2, + .parent = &clk_48m, + .enable = s5p6440_sclk_ctrl, + .ctrlbit = S5P_CLKCON_SCLK0_MMC2_48, + }, { + .name = "otg", + .id = -1, + .parent = &clk_h_low, + .enable = s5p6440_hclk0_ctrl, + .ctrlbit = S5P_CLKCON_HCLK0_USB + }, { + .name = "post", + .id = -1, + .parent = &clk_h_low, + .enable = s5p6440_hclk0_ctrl, + .ctrlbit = S5P_CLKCON_HCLK0_POST0 + }, { + .name = "lcd", + .id = -1, + .parent = &clk_h_low, + .enable = s5p6440_hclk1_ctrl, + .ctrlbit = S5P_CLKCON_HCLK1_DISPCON, + }, { + .name = "hsmmc", + .id = 0, + .parent = &clk_h_low, + .enable = s5p6440_hclk0_ctrl, + .ctrlbit = S5P_CLKCON_HCLK0_HSMMC0, + }, { + .name = "hsmmc", + .id = 1, + .parent = &clk_h_low, + .enable = s5p6440_hclk0_ctrl, + .ctrlbit = S5P_CLKCON_HCLK0_HSMMC1, + }, { + .name = "hsmmc", + .id = 2, + .parent = &clk_h_low, + .enable = s5p6440_hclk0_ctrl, + .ctrlbit = S5P_CLKCON_HCLK0_HSMMC2, + }, { + .name = "rtc", + .id = -1, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_RTC, + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_WDT, + }, { + .name = "timers", + .id = -1, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_PWM, + } +}; + +/* + * The following clocks will be enabled during clock initialization. + */ +static struct clk init_clocks[] = { + { + .name = "gpio", + .id = -1, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_GPIO, + }, { + .name = "uart", + .id = 0, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_UART0, + }, { + .name = "uart", + .id = 1, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_UART1, + }, { + .name = "uart", + .id = 2, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_UART2, + }, { + .name = "uart", + .id = 3, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_UART3, + } +}; + +static struct clk clk_iis_cd_v40 = { + .name = "iis_cdclk_v40", + .id = -1, +}; + +static struct clk clk_pcm_cd = { + .name = "pcm_cdclk", + .id = -1, +}; + +static struct clk *clkset_spi_mmc_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, + &clk_fin_epll, +}; + +static struct clksrc_sources clkset_spi_mmc = { + .sources = clkset_spi_mmc_list, + .nr_sources = ARRAY_SIZE(clkset_spi_mmc_list), +}; + +static struct clk *clkset_uart_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll +}; + +static struct clksrc_sources clkset_uart = { + .sources = clkset_uart_list, + .nr_sources = ARRAY_SIZE(clkset_uart_list), +}; + +static struct clksrc_clk clksrcs[] = { + { + .clk = { + .name = "mmc_bus", + .id = 0, + .ctrlbit = S5P_CLKCON_SCLK0_MMC0, + .enable = s5p6440_sclk_ctrl, + }, + .sources = &clkset_spi_mmc, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 18, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "mmc_bus", + .id = 1, + .ctrlbit = S5P_CLKCON_SCLK0_MMC1, + .enable = s5p6440_sclk_ctrl, + }, + .sources = &clkset_spi_mmc, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "mmc_bus", + .id = 2, + .ctrlbit = S5P_CLKCON_SCLK0_MMC2, + .enable = s5p6440_sclk_ctrl, + }, + .sources = &clkset_spi_mmc, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 22, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 4 }, + }, { + .clk = { + .name = "uclk1", + .id = -1, + .ctrlbit = S5P_CLKCON_SCLK0_UART, + .enable = s5p6440_sclk_ctrl, + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 13, .size = 1 }, + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "spi_epll", + .id = 0, + .ctrlbit = S5P_CLKCON_SCLK0_SPI0, + .enable = s5p6440_sclk_ctrl, + }, + .sources = &clkset_spi_mmc, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 14, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "spi_epll", + .id = 1, + .ctrlbit = S5P_CLKCON_SCLK0_SPI1, + .enable = s5p6440_sclk_ctrl, + }, + .sources = &clkset_spi_mmc, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 }, + } +}; + +/* Clock initialisation code */ +static struct clksrc_clk *init_parents[] = { + &clk_mout_apll, + &clk_mout_epll, + &clk_mout_mpll, +}; + +void __init_or_cpufreq s5p6440_setup_clocks(void) +{ + struct clk *xtal_clk; + unsigned long xtal; + unsigned long fclk; + unsigned long hclk; + unsigned long hclk_low; + unsigned long pclk; + unsigned long pclk_low; + unsigned long epll; + unsigned long apll; + unsigned long mpll; + unsigned int ptr; + u32 clkdiv0; + u32 clkdiv3; + + /* Set S5P6440 functions for clk_fout_epll */ + clk_fout_epll.enable = s5p6440_epll_enable; + clk_fout_epll.ops = &s5p6440_epll_ops; + + /* Set S5P6440 functions for arm clock */ + clk_arm.parent = &clk_mout_apll.clk; + clk_arm.ops = &s5p6440_clkarm_ops; + clk_48m.enable = s5p6440_clk48m_ctrl; + + clkdiv0 = __raw_readl(S5P_CLK_DIV0); + clkdiv3 = __raw_readl(S5P_CLK_DIV3); + + xtal_clk = clk_get(NULL, "ext_xtal"); + BUG_ON(IS_ERR(xtal_clk)); + + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + epll = s5p_get_pll90xx(xtal, __raw_readl(S5P_EPLL_CON), + __raw_readl(S5P_EPLL_CON_K)); + mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502); + apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4502); + + printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \ + " E=%ld.%ldMHz\n", + print_mhz(apll), print_mhz(mpll), print_mhz(epll)); + + fclk = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_ARM); + hclk = fclk / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK); + pclk = hclk / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK); + + if (__raw_readl(S5P_OTHERS) & S5P_OTHERS_HCLK_LOW_SEL_MPLL) { + /* Asynchronous mode */ + hclk_low = mpll / GET_DIV(clkdiv3, S5P_CLKDIV3_HCLK_LOW); + } else { + /* Synchronous mode */ + hclk_low = apll / GET_DIV(clkdiv3, S5P_CLKDIV3_HCLK_LOW); + } + + pclk_low = hclk_low / GET_DIV(clkdiv3, S5P_CLKDIV3_PCLK_LOW); + + printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \ + " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n", + print_mhz(hclk), print_mhz(hclk_low), + print_mhz(pclk), print_mhz(pclk_low)); + + clk_fout_mpll.rate = mpll; + clk_fout_epll.rate = epll; + clk_fout_apll.rate = apll; + + clk_f.rate = fclk; + clk_h.rate = hclk; + clk_p.rate = pclk; + clk_h_low.rate = hclk_low; + clk_p_low.rate = pclk_low; + + for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) + s3c_set_clksrc(init_parents[ptr], true); + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_set_clksrc(&clksrcs[ptr], true); +} + +static struct clk *clks[] __initdata = { + &clk_ext, + &clk_mout_epll.clk, + &clk_mout_mpll.clk, + &clk_dout_mpll, + &clk_iis_cd_v40, + &clk_pcm_cd, + &clk_p_low, + &clk_h_low, +}; + +void __init s5p6440_register_clocks(void) +{ + struct clk *clkp; + int ret; + int ptr; + + ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); + if (ret > 0) + printk(KERN_ERR "Failed to register %u clocks\n", ret); + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + + clkp = init_clocks_disable; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + (clkp->enable)(clkp, 0); + } + + s3c_pwmclk_init(); +} diff --git a/arch/arm/plat-s5p/s5p6440-init.c b/arch/arm/plat-s5p/s5p6440-init.c new file mode 100644 index 00000000000..90178256cc2 --- /dev/null +++ b/arch/arm/plat-s5p/s5p6440-init.c @@ -0,0 +1,50 @@ +/* linux/arch/arm/plat-s5p/s5p6440-init.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/serial_core.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/s5p6440.h> +#include <plat/regs-serial.h> + +static struct s3c24xx_uart_clksrc s5p6440_serial_clocks[] = { + [0] = { + .name = "pclk_low", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + }, + [1] = { + .name = "uclk1", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + }, +}; + +/* uart registration process */ +void __init s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + struct s3c2410_uartcfg *tcfg = cfg; + u32 ucnt; + + for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { + if (!tcfg->clocks) { + tcfg->clocks = s5p6440_serial_clocks; + tcfg->clocks_size = ARRAY_SIZE(s5p6440_serial_clocks); + } + } + + s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); +} diff --git a/arch/arm/plat-s5p/setup-i2c0.c b/arch/arm/plat-s5p/setup-i2c0.c new file mode 100644 index 00000000000..67a66e02a97 --- /dev/null +++ b/arch/arm/plat-s5p/setup-i2c0.c @@ -0,0 +1,25 @@ +/* linux/arch/arm/plat-s5p/setup-i2c0.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * I2C0 GPIO configuration. + * + * Based on plat-s3c64xx/setup-i2c0.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> + +struct platform_device; /* don't need the contents */ + +#include <plat/iic.h> + +void s3c_i2c0_cfg_gpio(struct platform_device *dev) +{ + /* Will be populated later */ +} diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig index b7b9e91c024..c7ccdf22eef 100644 --- a/arch/arm/plat-s5pc1xx/Kconfig +++ b/arch/arm/plat-s5pc1xx/Kconfig @@ -11,6 +11,9 @@ config PLAT_S5PC1XX select ARM_VIC select NO_IOPORT select ARCH_REQUIRE_GPIOLIB + select SAMSUNG_CLKSRC + select SAMSUNG_IRQ_UART + select SAMSUNG_IRQ_VIC_TIMER select S3C_GPIO_TRACK select S3C_GPIO_PULL_UPDOWN select S3C_GPIO_CFG_S3C24XX diff --git a/arch/arm/plat-s5pc1xx/clock.c b/arch/arm/plat-s5pc1xx/clock.c index 26c21d84979..387f23190c3 100644 --- a/arch/arm/plat-s5pc1xx/clock.c +++ b/arch/arm/plat-s5pc1xx/clock.c @@ -64,25 +64,13 @@ struct clk clk_54m = { .rate = 54000000, }; -static int clk_default_setrate(struct clk *clk, unsigned long rate) -{ - clk->rate = rate; - return 0; -} - -static int clk_dummy_enable(struct clk *clk, int enable) -{ - return 0; -} - struct clk clk_hd0 = { .name = "hclkd0", .id = -1, .rate = 0, .parent = NULL, .ctrlbit = 0, - .set_rate = clk_default_setrate, - .enable = clk_dummy_enable, + .ops = &clk_ops_def_setrate, }; struct clk clk_pd0 = { @@ -91,8 +79,7 @@ struct clk clk_pd0 = { .rate = 0, .parent = NULL, .ctrlbit = 0, - .set_rate = clk_default_setrate, - .enable = clk_dummy_enable, + .ops = &clk_ops_def_setrate, }; static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable) @@ -686,6 +673,8 @@ static struct clk s5pc100_init_clocks[] = { static struct clk *clks[] __initdata = { &clk_ext, &clk_epll, + &clk_pd0, + &clk_hd0, &clk_27m, &clk_48m, &clk_54m, @@ -700,16 +689,8 @@ void __init s5pc1xx_register_clocks(void) s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - clkp = s5pc100_init_clocks; - size = ARRAY_SIZE(s5pc100_init_clocks); - - for (ptr = 0; ptr < size; ptr++, clkp++) { - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } + s3c_register_clocks(s5pc100_init_clocks, + ARRAY_SIZE(s5pc100_init_clocks)); clkp = s5pc100_init_clocks_disable; size = ARRAY_SIZE(s5pc100_init_clocks_disable); diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c index f749bc5407b..586c95c60bf 100644 --- a/arch/arm/plat-s5pc1xx/dev-uart.c +++ b/arch/arm/plat-s5pc1xx/dev-uart.c @@ -143,32 +143,3 @@ struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = { .nr_resources = ARRAY_SIZE(s5pc1xx_uart3_resource), }, }; - -/* uart devices */ - -static struct platform_device s3c24xx_uart_device0 = { - .id = 0, -}; - -static struct platform_device s3c24xx_uart_device1 = { - .id = 1, -}; - -static struct platform_device s3c24xx_uart_device2 = { - .id = 2, -}; - -static struct platform_device s3c24xx_uart_device3 = { - .id = 3, -}; - -struct platform_device *s3c24xx_uart_src[4] = { - &s3c24xx_uart_device0, - &s3c24xx_uart_device1, - &s3c24xx_uart_device2, - &s3c24xx_uart_device3, -}; - -struct platform_device *s3c24xx_uart_devs[4] = { -}; - diff --git a/arch/arm/plat-s5pc1xx/gpio-config.c b/arch/arm/plat-s5pc1xx/gpio-config.c index bba675df9c7..a4f67e80a15 100644 --- a/arch/arm/plat-s5pc1xx/gpio-config.c +++ b/arch/arm/plat-s5pc1xx/gpio-config.c @@ -16,7 +16,7 @@ #include <linux/gpio.h> #include <linux/io.h> -#include <mach/gpio-core.h> +#include <plat/gpio-core.h> #include <plat/gpio-cfg-s5pc1xx.h> s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off) diff --git a/arch/arm/plat-s5pc1xx/gpiolib.c b/arch/arm/plat-s5pc1xx/gpiolib.c index facb410e7a7..1ffc57ac293 100644 --- a/arch/arm/plat-s5pc1xx/gpiolib.c +++ b/arch/arm/plat-s5pc1xx/gpiolib.c @@ -17,8 +17,8 @@ #include <linux/gpio.h> #include <mach/map.h> -#include <mach/gpio-core.h> +#include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> #include <plat/regs-gpio.h> diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h index ef8736366f0..409c804315e 100644 --- a/arch/arm/plat-s5pc1xx/include/plat/irqs.h +++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h @@ -88,11 +88,11 @@ #define IRQ_MDMA S5PC1XX_IRQ_VIC0(18) #define IRQ_PDMA0 S5PC1XX_IRQ_VIC0(19) #define IRQ_PDMA1 S5PC1XX_IRQ_VIC0(20) -#define IRQ_TIMER0 S5PC1XX_IRQ_VIC0(21) -#define IRQ_TIMER1 S5PC1XX_IRQ_VIC0(22) -#define IRQ_TIMER2 S5PC1XX_IRQ_VIC0(23) -#define IRQ_TIMER3 S5PC1XX_IRQ_VIC0(24) -#define IRQ_TIMER4 S5PC1XX_IRQ_VIC0(25) +#define IRQ_TIMER0_VIC S5PC1XX_IRQ_VIC0(21) +#define IRQ_TIMER1_VIC S5PC1XX_IRQ_VIC0(22) +#define IRQ_TIMER2_VIC S5PC1XX_IRQ_VIC0(23) +#define IRQ_TIMER3_VIC S5PC1XX_IRQ_VIC0(24) +#define IRQ_TIMER4_VIC S5PC1XX_IRQ_VIC0(25) #define IRQ_SYSTIMER S5PC1XX_IRQ_VIC0(26) #define IRQ_WDT S5PC1XX_IRQ_VIC0(27) #define IRQ_RTC_ALARM S5PC1XX_IRQ_VIC0(28) @@ -171,8 +171,15 @@ #define IRQ_SDMIRQ S5PC1XX_IRQ_VIC2(30) #define IRQ_SDMFIQ S5PC1XX_IRQ_VIC2(31) +#define IRQ_TIMER(x) (IRQ_SDMFIQ + 1 + (x)) +#define IRQ_TIMER0 IRQ_TIMER(0) +#define IRQ_TIMER1 IRQ_TIMER(1) +#define IRQ_TIMER2 IRQ_TIMER(2) +#define IRQ_TIMER3 IRQ_TIMER(3) +#define IRQ_TIMER4 IRQ_TIMER(4) + /* External interrupt */ -#define S3C_IRQ_EINT_BASE (IRQ_SDMFIQ + 1) +#define S3C_IRQ_EINT_BASE (IRQ_SDMFIQ + 6) #define S3C_EINT(x) (S3C_IRQ_EINT_BASE + (x - 16)) #define IRQ_EINT(x) (x < 16 ? IRQ_EINT0 + x : S3C_EINT(x)) diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h index c5cc86e92d6..24dec4e5253 100644 --- a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h +++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h @@ -61,73 +61,10 @@ #define S5PC100_EPLL_MASK 0xffffffff #define S5PC100_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s))) -/* CLKSRC0 */ -#define S5PC100_CLKSRC0_APLL_MASK (0x1<<0) -#define S5PC100_CLKSRC0_APLL_SHIFT (0) -#define S5PC100_CLKSRC0_MPLL_MASK (0x1<<4) -#define S5PC100_CLKSRC0_MPLL_SHIFT (4) -#define S5PC100_CLKSRC0_EPLL_MASK (0x1<<8) -#define S5PC100_CLKSRC0_EPLL_SHIFT (8) -#define S5PC100_CLKSRC0_HPLL_MASK (0x1<<12) -#define S5PC100_CLKSRC0_HPLL_SHIFT (12) -#define S5PC100_CLKSRC0_AMMUX_MASK (0x1<<16) -#define S5PC100_CLKSRC0_AMMUX_SHIFT (16) -#define S5PC100_CLKSRC0_HREF_MASK (0x1<<20) -#define S5PC100_CLKSRC0_HREF_SHIFT (20) -#define S5PC100_CLKSRC0_ONENAND_MASK (0x1<<24) -#define S5PC100_CLKSRC0_ONENAND_SHIFT (24) - - -/* CLKSRC1 */ -#define S5PC100_CLKSRC1_UART_MASK (0x1<<0) -#define S5PC100_CLKSRC1_UART_SHIFT (0) -#define S5PC100_CLKSRC1_SPI0_MASK (0x3<<4) -#define S5PC100_CLKSRC1_SPI0_SHIFT (4) -#define S5PC100_CLKSRC1_SPI1_MASK (0x3<<8) -#define S5PC100_CLKSRC1_SPI1_SHIFT (8) -#define S5PC100_CLKSRC1_SPI2_MASK (0x3<<12) -#define S5PC100_CLKSRC1_SPI2_SHIFT (12) -#define S5PC100_CLKSRC1_IRDA_MASK (0x3<<16) -#define S5PC100_CLKSRC1_IRDA_SHIFT (16) -#define S5PC100_CLKSRC1_UHOST_MASK (0x3<<20) -#define S5PC100_CLKSRC1_UHOST_SHIFT (20) -#define S5PC100_CLKSRC1_CLK48M_MASK (0x1<<24) +/* CLKSRC0..CLKSRC3 -> mostly removed due to clksrc updates */ +#define S5PC100_CLKSRC1_CLK48M_MASK (0x1<<24) #define S5PC100_CLKSRC1_CLK48M_SHIFT (24) -/* CLKSRC2 */ -#define S5PC100_CLKSRC2_MMC0_MASK (0x3<<0) -#define S5PC100_CLKSRC2_MMC0_SHIFT (0) -#define S5PC100_CLKSRC2_MMC1_MASK (0x3<<4) -#define S5PC100_CLKSRC2_MMC1_SHIFT (4) -#define S5PC100_CLKSRC2_MMC2_MASK (0x3<<8) -#define S5PC100_CLKSRC2_MMC2_SHIFT (8) -#define S5PC100_CLKSRC2_LCD_MASK (0x3<<12) -#define S5PC100_CLKSRC2_LCD_SHIFT (12) -#define S5PC100_CLKSRC2_FIMC0_MASK (0x3<<16) -#define S5PC100_CLKSRC2_FIMC0_SHIFT (16) -#define S5PC100_CLKSRC2_FIMC1_MASK (0x3<<20) -#define S5PC100_CLKSRC2_FIMC1_SHIFT (20) -#define S5PC100_CLKSRC2_FIMC2_MASK (0x3<<24) -#define S5PC100_CLKSRC2_FIMC2_SHIFT (24) -#define S5PC100_CLKSRC2_MIXER_MASK (0x3<<28) -#define S5PC100_CLKSRC2_MIXER_SHIFT (28) - -/* CLKSRC3 */ -#define S5PC100_CLKSRC3_PWI_MASK (0x3<<0) -#define S5PC100_CLKSRC3_PWI_SHIFT (0) -#define S5PC100_CLKSRC3_HCLKD2_MASK (0x1<<4) -#define S5PC100_CLKSRC3_HCLKD2_SHIFT (4) -#define S5PC100_CLKSRC3_I2SD2_MASK (0x3<<8) -#define S5PC100_CLKSRC3_I2SD2_SHIFT (8) -#define S5PC100_CLKSRC3_AUDIO0_MASK (0x7<<12) -#define S5PC100_CLKSRC3_AUDIO0_SHIFT (12) -#define S5PC100_CLKSRC3_AUDIO1_MASK (0x7<<16) -#define S5PC100_CLKSRC3_AUDIO1_SHIFT (16) -#define S5PC100_CLKSRC3_AUDIO2_MASK (0x7<<20) -#define S5PC100_CLKSRC3_AUDIO2_SHIFT (20) -#define S5PC100_CLKSRC3_SPDIF_MASK (0x3<<24) -#define S5PC100_CLKSRC3_SPDIF_SHIFT (24) - /* CLKDIV0 */ #define S5PC100_CLKDIV0_APLL_MASK (0x1<<0) #define S5PC100_CLKDIV0_APLL_SHIFT (0) @@ -140,7 +77,7 @@ #define S5PC100_CLKDIV0_SECSS_MASK (0x7<<16) #define S5PC100_CLKDIV0_SECSS_SHIFT (16) -/* CLKDIV1 */ +/* CLKDIV1 (OneNAND clock only used in one place, removed) */ #define S5PC100_CLKDIV1_APLL2_MASK (0x7<<0) #define S5PC100_CLKDIV1_APLL2_SHIFT (0) #define S5PC100_CLKDIV1_MPLL_MASK (0x3<<4) @@ -151,56 +88,12 @@ #define S5PC100_CLKDIV1_D1_SHIFT (12) #define S5PC100_CLKDIV1_PCLKD1_MASK (0x7<<16) #define S5PC100_CLKDIV1_PCLKD1_SHIFT (16) -#define S5PC100_CLKDIV1_ONENAND_MASK (0x3<<20) -#define S5PC100_CLKDIV1_ONENAND_SHIFT (20) #define S5PC100_CLKDIV1_CAM_MASK (0x1F<<24) #define S5PC100_CLKDIV1_CAM_SHIFT (24) -/* CLKDIV2 */ -#define S5PC100_CLKDIV2_UART_MASK (0x7<<0) -#define S5PC100_CLKDIV2_UART_SHIFT (0) -#define S5PC100_CLKDIV2_SPI0_MASK (0xf<<4) -#define S5PC100_CLKDIV2_SPI0_SHIFT (4) -#define S5PC100_CLKDIV2_SPI1_MASK (0xf<<8) -#define S5PC100_CLKDIV2_SPI1_SHIFT (8) -#define S5PC100_CLKDIV2_SPI2_MASK (0xf<<12) -#define S5PC100_CLKDIV2_SPI2_SHIFT (12) -#define S5PC100_CLKDIV2_IRDA_MASK (0xf<<16) -#define S5PC100_CLKDIV2_IRDA_SHIFT (16) -#define S5PC100_CLKDIV2_UHOST_MASK (0xf<<20) -#define S5PC100_CLKDIV2_UHOST_SHIFT (20) - -/* CLKDIV3 */ -#define S5PC100_CLKDIV3_MMC0_MASK (0xf<<0) -#define S5PC100_CLKDIV3_MMC0_SHIFT (0) -#define S5PC100_CLKDIV3_MMC1_MASK (0xf<<4) -#define S5PC100_CLKDIV3_MMC1_SHIFT (4) -#define S5PC100_CLKDIV3_MMC2_MASK (0xf<<8) -#define S5PC100_CLKDIV3_MMC2_SHIFT (8) -#define S5PC100_CLKDIV3_LCD_MASK (0xf<<12) -#define S5PC100_CLKDIV3_LCD_SHIFT (12) -#define S5PC100_CLKDIV3_FIMC0_MASK (0xf<<16) -#define S5PC100_CLKDIV3_FIMC0_SHIFT (16) -#define S5PC100_CLKDIV3_FIMC1_MASK (0xf<<20) -#define S5PC100_CLKDIV3_FIMC1_SHIFT (20) -#define S5PC100_CLKDIV3_FIMC2_MASK (0xf<<24) -#define S5PC100_CLKDIV3_FIMC2_SHIFT (24) -#define S5PC100_CLKDIV3_HDMI_MASK (0xf<<28) -#define S5PC100_CLKDIV3_HDMI_SHIFT (28) - -/* CLKDIV4 */ -#define S5PC100_CLKDIV4_PWI_MASK (0x7<<0) -#define S5PC100_CLKDIV4_PWI_SHIFT (0) -#define S5PC100_CLKDIV4_HCLKD2_MASK (0x7<<4) -#define S5PC100_CLKDIV4_HCLKD2_SHIFT (4) -#define S5PC100_CLKDIV4_I2SD2_MASK (0xf<<8) -#define S5PC100_CLKDIV4_I2SD2_SHIFT (8) -#define S5PC100_CLKDIV4_AUDIO0_MASK (0xf<<12) -#define S5PC100_CLKDIV4_AUDIO0_SHIFT (12) -#define S5PC100_CLKDIV4_AUDIO1_MASK (0xf<<16) -#define S5PC100_CLKDIV4_AUDIO1_SHIFT (16) -#define S5PC100_CLKDIV4_AUDIO2_MASK (0xf<<20) -#define S5PC100_CLKDIV4_AUDIO2_SHIFT (20) +/* CLKDIV2 => removed in clksrc update */ +/* CLKDIV3 => removed in clksrc update, or not needed */ +/* CLKDIV4 => removed in clksrc update, or not needed */ /* HCLKD0/PCLKD0 Clock Gate 0 Registers */ #define S5PC100_CLKGATE_D00_INTC (1<<0) diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c index e44fd04ef33..bfc52482781 100644 --- a/arch/arm/plat-s5pc1xx/irq.c +++ b/arch/arm/plat-s5pc1xx/irq.c @@ -20,87 +20,14 @@ #include <asm/hardware/vic.h> #include <mach/map.h> -#include <plat/regs-timer.h> +#include <plat/irq-vic-timer.h> +#include <plat/irq-uart.h> #include <plat/cpu.h> -/* Timer interrupt handling */ - -static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq) -{ - generic_handle_irq(sub_irq); -} - -static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_timer(irq, IRQ_TIMER0); -} - -static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_timer(irq, IRQ_TIMER1); -} - -static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_timer(irq, IRQ_TIMER2); -} - -static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_timer(irq, IRQ_TIMER3); -} - -static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_timer(irq, IRQ_TIMER4); -} - -/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */ - -static void s3c_irq_timer_mask(unsigned int irq) -{ - u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); - - reg &= 0x1f; /* mask out pending interrupts */ - reg &= ~(1 << (irq - IRQ_TIMER0)); - __raw_writel(reg, S3C64XX_TINT_CSTAT); -} - -static void s3c_irq_timer_unmask(unsigned int irq) -{ - u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); - - reg &= 0x1f; /* mask out pending interrupts */ - reg |= 1 << (irq - IRQ_TIMER0); - __raw_writel(reg, S3C64XX_TINT_CSTAT); -} - -static void s3c_irq_timer_ack(unsigned int irq) -{ - u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); - - reg &= 0x1f; /* mask out pending interrupts */ - reg |= (1 << 5) << (irq - IRQ_TIMER0); - __raw_writel(reg, S3C64XX_TINT_CSTAT); -} - -static struct irq_chip s3c_irq_timer = { - .name = "s3c-timer", - .mask = s3c_irq_timer_mask, - .unmask = s3c_irq_timer_unmask, - .ack = s3c_irq_timer_ack, -}; - -struct uart_irq { - void __iomem *regs; - unsigned int base_irq; - unsigned int parent_irq; -}; - /* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3] * are consecutive when looking up the interrupt in the demux routines. */ -static struct uart_irq uart_irqs[] = { +static struct s3c_uart_irq uart_irqs[] = { [0] = { .regs = (void *)S3C_VA_UART0, .base_irq = IRQ_S3CUART_BASE0, @@ -123,113 +50,9 @@ static struct uart_irq uart_irqs[] = { }, }; -static inline void __iomem *s3c_irq_uart_base(unsigned int irq) -{ - struct uart_irq *uirq = get_irq_chip_data(irq); - return uirq->regs; -} - -static inline unsigned int s3c_irq_uart_bit(unsigned int irq) -{ - return irq & 3; -} - -/* UART interrupt registers, not worth adding to seperate include header */ -#define S3C64XX_UINTP 0x30 -#define S3C64XX_UINTSP 0x34 -#define S3C64XX_UINTM 0x38 - -static void s3c_irq_uart_mask(unsigned int irq) -{ - void __iomem *regs = s3c_irq_uart_base(irq); - unsigned int bit = s3c_irq_uart_bit(irq); - u32 reg; - - reg = __raw_readl(regs + S3C64XX_UINTM); - reg |= (1 << bit); - __raw_writel(reg, regs + S3C64XX_UINTM); -} - -static void s3c_irq_uart_maskack(unsigned int irq) -{ - void __iomem *regs = s3c_irq_uart_base(irq); - unsigned int bit = s3c_irq_uart_bit(irq); - u32 reg; - - reg = __raw_readl(regs + S3C64XX_UINTM); - reg |= (1 << bit); - __raw_writel(reg, regs + S3C64XX_UINTM); - __raw_writel(1 << bit, regs + S3C64XX_UINTP); -} - -static void s3c_irq_uart_unmask(unsigned int irq) -{ - void __iomem *regs = s3c_irq_uart_base(irq); - unsigned int bit = s3c_irq_uart_bit(irq); - u32 reg; - - reg = __raw_readl(regs + S3C64XX_UINTM); - reg &= ~(1 << bit); - __raw_writel(reg, regs + S3C64XX_UINTM); -} - -static void s3c_irq_uart_ack(unsigned int irq) -{ - void __iomem *regs = s3c_irq_uart_base(irq); - unsigned int bit = s3c_irq_uart_bit(irq); - - __raw_writel(1 << bit, regs + S3C64XX_UINTP); -} - -static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc) -{ - struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0]; - u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP); - int base = uirq->base_irq; - - if (pend & (1 << 0)) - generic_handle_irq(base); - if (pend & (1 << 1)) - generic_handle_irq(base + 1); - if (pend & (1 << 2)) - generic_handle_irq(base + 2); - if (pend & (1 << 3)) - generic_handle_irq(base + 3); -} - -static struct irq_chip s3c_irq_uart = { - .name = "s3c-uart", - .mask = s3c_irq_uart_mask, - .unmask = s3c_irq_uart_unmask, - .mask_ack = s3c_irq_uart_maskack, - .ack = s3c_irq_uart_ack, -}; - -static void __init s5pc1xx_uart_irq(struct uart_irq *uirq) -{ - void __iomem *reg_base = uirq->regs; - unsigned int irq; - int offs; - - /* mask all interrupts at the start. */ - __raw_writel(0xf, reg_base + S3C64XX_UINTM); - - for (offs = 0; offs < 3; offs++) { - irq = uirq->base_irq + offs; - - set_irq_chip(irq, &s3c_irq_uart); - set_irq_chip_data(irq, uirq); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - - set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart); -} - void __init s5pc1xx_init_irq(u32 *vic_valid, int num) { int i; - int uart, irq; printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); @@ -240,20 +63,13 @@ void __init s5pc1xx_init_irq(u32 *vic_valid, int num) /* add the timer sub-irqs */ - set_irq_chained_handler(IRQ_TIMER0, s3c_irq_demux_timer0); - set_irq_chained_handler(IRQ_TIMER1, s3c_irq_demux_timer1); - set_irq_chained_handler(IRQ_TIMER2, s3c_irq_demux_timer2); - set_irq_chained_handler(IRQ_TIMER3, s3c_irq_demux_timer3); - set_irq_chained_handler(IRQ_TIMER4, s3c_irq_demux_timer4); - - for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) { - set_irq_chip(irq, &s3c_irq_timer); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } + s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0); + s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1); + s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2); + s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3); + s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4); - for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++) - s5pc1xx_uart_irq(&uart_irqs[uart]); + s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs)); } diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c index b436d44510c..2bf6c57a96a 100644 --- a/arch/arm/plat-s5pc1xx/s5pc100-clock.c +++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c @@ -29,6 +29,7 @@ #include <plat/regs-clock.h> #include <plat/clock.h> +#include <plat/clock-clksrc.h> #include <plat/cpu.h> #include <plat/pll.h> #include <plat/devs.h> @@ -51,23 +52,6 @@ static struct clk clk_ext_xtal_mux = { #define clk_fout_mpll clk_mpll #define clk_vclk_54m clk_54m -struct clk_sources { - unsigned int nr_sources; - struct clk **sources; -}; - -struct clksrc_clk { - struct clk clk; - unsigned int mask; - unsigned int shift; - - struct clk_sources *sources; - - unsigned int divider_shift; - void __iomem *reg_divider; - void __iomem *reg_source; -}; - /* APLL */ static struct clk clk_fout_apll = { .name = "fout_apll", @@ -80,7 +64,7 @@ static struct clk *clk_src_apll_list[] = { [1] = &clk_fout_apll, }; -static struct clk_sources clk_src_apll = { +static struct clksrc_sources clk_src_apll = { .sources = clk_src_apll_list, .nr_sources = ARRAY_SIZE(clk_src_apll_list), }; @@ -90,10 +74,8 @@ static struct clksrc_clk clk_mout_apll = { .name = "mout_apll", .id = -1, }, - .shift = S5PC100_CLKSRC0_APLL_SHIFT, - .mask = S5PC100_CLKSRC0_APLL_MASK, .sources = &clk_src_apll, - .reg_source = S5PC100_CLKSRC0, + .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 0, .size = 1, }, }; static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk) @@ -111,7 +93,9 @@ static struct clk clk_dout_apll = { .name = "dout_apll", .id = -1, .parent = &clk_mout_apll.clk, - .get_rate = s5pc100_clk_dout_apll_get_rate, + .ops = &(struct clk_ops) { + .get_rate = s5pc100_clk_dout_apll_get_rate, + }, }; static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk) @@ -165,9 +149,11 @@ static struct clk clk_arm = { .name = "armclk", .id = -1, .parent = &clk_dout_apll, - .get_rate = s5pc100_clk_arm_get_rate, - .set_rate = s5pc100_clk_arm_set_rate, - .round_rate = s5pc100_clk_arm_round_rate, + .ops = &(struct clk_ops) { + .get_rate = s5pc100_clk_arm_get_rate, + .set_rate = s5pc100_clk_arm_set_rate, + .round_rate = s5pc100_clk_arm_round_rate, + }, }; static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk) @@ -185,7 +171,9 @@ static struct clk clk_dout_d0_bus = { .name = "dout_d0_bus", .id = -1, .parent = &clk_arm, - .get_rate = s5pc100_clk_dout_d0_bus_get_rate, + .ops = &(struct clk_ops) { + .get_rate = s5pc100_clk_dout_d0_bus_get_rate, + }, }; static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk) @@ -203,7 +191,9 @@ static struct clk clk_dout_pclkd0 = { .name = "dout_pclkd0", .id = -1, .parent = &clk_dout_d0_bus, - .get_rate = s5pc100_clk_dout_pclkd0_get_rate, + .ops = &(struct clk_ops) { + .get_rate = s5pc100_clk_dout_pclkd0_get_rate, + }, }; static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk) @@ -221,7 +211,9 @@ static struct clk clk_dout_apll2 = { .name = "dout_apll2", .id = -1, .parent = &clk_mout_apll.clk, - .get_rate = s5pc100_clk_dout_apll2_get_rate, + .ops = &(struct clk_ops) { + .get_rate = s5pc100_clk_dout_apll2_get_rate, + }, }; /* MPLL */ @@ -230,7 +222,7 @@ static struct clk *clk_src_mpll_list[] = { [1] = &clk_fout_mpll, }; -static struct clk_sources clk_src_mpll = { +static struct clksrc_sources clk_src_mpll = { .sources = clk_src_mpll_list, .nr_sources = ARRAY_SIZE(clk_src_mpll_list), }; @@ -240,10 +232,8 @@ static struct clksrc_clk clk_mout_mpll = { .name = "mout_mpll", .id = -1, }, - .shift = S5PC100_CLKSRC0_MPLL_SHIFT, - .mask = S5PC100_CLKSRC0_MPLL_MASK, .sources = &clk_src_mpll, - .reg_source = S5PC100_CLKSRC0, + .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 4, .size = 1, }, }; static struct clk *clkset_am_list[] = { @@ -251,7 +241,7 @@ static struct clk *clkset_am_list[] = { [1] = &clk_dout_apll2, }; -static struct clk_sources clk_src_am = { +static struct clksrc_sources clk_src_am = { .sources = clkset_am_list, .nr_sources = ARRAY_SIZE(clkset_am_list), }; @@ -261,10 +251,8 @@ static struct clksrc_clk clk_mout_am = { .name = "mout_am", .id = -1, }, - .shift = S5PC100_CLKSRC0_AMMUX_SHIFT, - .mask = S5PC100_CLKSRC0_AMMUX_MASK, .sources = &clk_src_am, - .reg_source = S5PC100_CLKSRC0, + .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 16, .size = 1, }, }; static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk) @@ -284,7 +272,9 @@ static struct clk clk_dout_d1_bus = { .name = "dout_d1_bus", .id = -1, .parent = &clk_mout_am.clk, - .get_rate = s5pc100_clk_dout_d1_bus_get_rate, + .ops = &(struct clk_ops) { + .get_rate = s5pc100_clk_dout_d1_bus_get_rate, + }, }; static struct clk *clkset_onenand_list[] = { @@ -292,7 +282,7 @@ static struct clk *clkset_onenand_list[] = { [1] = &clk_dout_d1_bus, }; -static struct clk_sources clk_src_onenand = { +static struct clksrc_sources clk_src_onenand = { .sources = clkset_onenand_list, .nr_sources = ARRAY_SIZE(clkset_onenand_list), }; @@ -302,10 +292,8 @@ static struct clksrc_clk clk_mout_onenand = { .name = "mout_onenand", .id = -1, }, - .shift = S5PC100_CLKSRC0_ONENAND_SHIFT, - .mask = S5PC100_CLKSRC0_ONENAND_MASK, .sources = &clk_src_onenand, - .reg_source = S5PC100_CLKSRC0, + .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 24, .size = 1, }, }; static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk) @@ -325,7 +313,9 @@ static struct clk clk_dout_pclkd1 = { .name = "dout_pclkd1", .id = -1, .parent = &clk_dout_d1_bus, - .get_rate = s5pc100_clk_dout_pclkd1_get_rate, + .ops = &(struct clk_ops) { + .get_rate = s5pc100_clk_dout_pclkd1_get_rate, + }, }; static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk) @@ -345,7 +335,9 @@ static struct clk clk_dout_mpll2 = { .name = "dout_mpll2", .id = -1, .parent = &clk_mout_am.clk, - .get_rate = s5pc100_clk_dout_mpll2_get_rate, + .ops = &(struct clk_ops) { + .get_rate = s5pc100_clk_dout_mpll2_get_rate, + }, }; static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk) @@ -365,7 +357,9 @@ static struct clk clk_dout_cam = { .name = "dout_cam", .id = -1, .parent = &clk_dout_mpll2, - .get_rate = s5pc100_clk_dout_cam_get_rate, + .ops = &(struct clk_ops) { + .get_rate = s5pc100_clk_dout_cam_get_rate, + }, }; static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk) @@ -385,7 +379,9 @@ static struct clk clk_dout_mpll = { .name = "dout_mpll", .id = -1, .parent = &clk_mout_am.clk, - .get_rate = s5pc100_clk_dout_mpll_get_rate, + .ops = &(struct clk_ops) { + .get_rate = s5pc100_clk_dout_mpll_get_rate, + }, }; /* EPLL */ @@ -399,7 +395,7 @@ static struct clk *clk_src_epll_list[] = { [1] = &clk_fout_epll, }; -static struct clk_sources clk_src_epll = { +static struct clksrc_sources clk_src_epll = { .sources = clk_src_epll_list, .nr_sources = ARRAY_SIZE(clk_src_epll_list), }; @@ -409,10 +405,8 @@ static struct clksrc_clk clk_mout_epll = { .name = "mout_epll", .id = -1, }, - .shift = S5PC100_CLKSRC0_EPLL_SHIFT, - .mask = S5PC100_CLKSRC0_EPLL_MASK, - .sources = &clk_src_epll, - .reg_source = S5PC100_CLKSRC0, + .sources = &clk_src_epll, + .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 8, .size = 1, }, }; /* HPLL */ @@ -426,7 +420,7 @@ static struct clk *clk_src_hpll_list[] = { [1] = &clk_fout_hpll, }; -static struct clk_sources clk_src_hpll = { +static struct clksrc_sources clk_src_hpll = { .sources = clk_src_hpll_list, .nr_sources = ARRAY_SIZE(clk_src_hpll_list), }; @@ -436,10 +430,8 @@ static struct clksrc_clk clk_mout_hpll = { .name = "mout_hpll", .id = -1, }, - .shift = S5PC100_CLKSRC0_HPLL_SHIFT, - .mask = S5PC100_CLKSRC0_HPLL_MASK, - .sources = &clk_src_hpll, - .reg_source = S5PC100_CLKSRC0, + .sources = &clk_src_hpll, + .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 12, .size = 1, }, }; /* Peripherals */ @@ -454,190 +446,6 @@ static struct clksrc_clk clk_mout_hpll = { * have a common parent divisor so are not included here. */ -static inline struct clksrc_clk *to_clksrc(struct clk *clk) -{ - return container_of(clk, struct clksrc_clk, clk); -} - -static unsigned long s5pc100_getrate_clksrc(struct clk *clk) -{ - struct clksrc_clk *sclk = to_clksrc(clk); - unsigned long rate = clk_get_rate(clk->parent); - u32 clkdiv = __raw_readl(sclk->reg_divider); - - clkdiv >>= sclk->divider_shift; - clkdiv &= 0xf; - clkdiv++; - - rate /= clkdiv; - return rate; -} - -static int s5pc100_setrate_clksrc(struct clk *clk, unsigned long rate) -{ - struct clksrc_clk *sclk = to_clksrc(clk); - void __iomem *reg = sclk->reg_divider; - unsigned int div; - u32 val; - - rate = clk_round_rate(clk, rate); - div = clk_get_rate(clk->parent) / rate; - if (div > 16) - return -EINVAL; - - val = __raw_readl(reg); - val &= ~(0xf << sclk->divider_shift); - val |= (div - 1) << sclk->divider_shift; - __raw_writel(val, reg); - - return 0; -} - -static int s5pc100_setparent_clksrc(struct clk *clk, struct clk *parent) -{ - struct clksrc_clk *sclk = to_clksrc(clk); - struct clk_sources *srcs = sclk->sources; - u32 clksrc = __raw_readl(sclk->reg_source); - int src_nr = -1; - int ptr; - - for (ptr = 0; ptr < srcs->nr_sources; ptr++) - if (srcs->sources[ptr] == parent) { - src_nr = ptr; - break; - } - - if (src_nr >= 0) { - clksrc &= ~sclk->mask; - clksrc |= src_nr << sclk->shift; - - __raw_writel(clksrc, sclk->reg_source); - return 0; - } - - return -EINVAL; -} - -static unsigned long s5pc100_roundrate_clksrc(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - rate = parent_rate; - else { - div = rate / parent_rate; - - if (div == 0) - div = 1; - if (div > 16) - div = 16; - - rate = parent_rate / div; - } - - return rate; -} - -static struct clk *clkset_spi_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll2, - &clk_fin_epll, - &clk_mout_hpll.clk, -}; - -static struct clk_sources clkset_spi = { - .sources = clkset_spi_list, - .nr_sources = ARRAY_SIZE(clkset_spi_list), -}; - -static struct clksrc_clk clk_spi0 = { - .clk = { - .name = "spi_bus", - .id = 0, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0, - .enable = s5pc100_sclk0_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC1_SPI0_SHIFT, - .mask = S5PC100_CLKSRC1_SPI0_MASK, - .sources = &clkset_spi, - .divider_shift = S5PC100_CLKDIV2_SPI0_SHIFT, - .reg_divider = S5PC100_CLKDIV2, - .reg_source = S5PC100_CLKSRC1, -}; - -static struct clksrc_clk clk_spi1 = { - .clk = { - .name = "spi_bus", - .id = 1, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1, - .enable = s5pc100_sclk0_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC1_SPI1_SHIFT, - .mask = S5PC100_CLKSRC1_SPI1_MASK, - .sources = &clkset_spi, - .divider_shift = S5PC100_CLKDIV2_SPI1_SHIFT, - .reg_divider = S5PC100_CLKDIV2, - .reg_source = S5PC100_CLKSRC1, -}; - -static struct clksrc_clk clk_spi2 = { - .clk = { - .name = "spi_bus", - .id = 2, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2, - .enable = s5pc100_sclk0_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC1_SPI2_SHIFT, - .mask = S5PC100_CLKSRC1_SPI2_MASK, - .sources = &clkset_spi, - .divider_shift = S5PC100_CLKDIV2_SPI2_SHIFT, - .reg_divider = S5PC100_CLKDIV2, - .reg_source = S5PC100_CLKSRC1, -}; - -static struct clk *clkset_uart_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, -}; - -static struct clk_sources clkset_uart = { - .sources = clkset_uart_list, - .nr_sources = ARRAY_SIZE(clkset_uart_list), -}; - -static struct clksrc_clk clk_uart_uclk1 = { - .clk = { - .name = "uclk1", - .id = -1, - .ctrlbit = S5PC100_CLKGATE_SCLK0_UART, - .enable = s5pc100_sclk0_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC1_UART_SHIFT, - .mask = S5PC100_CLKSRC1_UART_MASK, - .sources = &clkset_uart, - .divider_shift = S5PC100_CLKDIV2_UART_SHIFT, - .reg_divider = S5PC100_CLKDIV2, - .reg_source = S5PC100_CLKSRC1, -}; - static struct clk clk_iis_cd0 = { .name = "iis_cdclk0", .id = -1, @@ -672,28 +480,31 @@ static struct clk *clkset_audio0_list[] = { &clk_mout_hpll.clk, }; -static struct clk_sources clkset_audio0 = { +static struct clksrc_sources clkset_audio0 = { .sources = clkset_audio0_list, .nr_sources = ARRAY_SIZE(clkset_audio0_list), }; -static struct clksrc_clk clk_audio0 = { - .clk = { - .name = "audio-bus", - .id = 0, - .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO0, - .enable = s5pc100_sclk1_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC3_AUDIO0_SHIFT, - .mask = S5PC100_CLKSRC3_AUDIO0_MASK, - .sources = &clkset_audio0, - .divider_shift = S5PC100_CLKDIV4_AUDIO0_SHIFT, - .reg_divider = S5PC100_CLKDIV4, - .reg_source = S5PC100_CLKSRC3, +static struct clk *clkset_spi_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll2, + &clk_fin_epll, + &clk_mout_hpll.clk, +}; + +static struct clksrc_sources clkset_spi = { + .sources = clkset_spi_list, + .nr_sources = ARRAY_SIZE(clkset_spi_list), +}; + +static struct clk *clkset_uart_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, +}; + +static struct clksrc_sources clkset_uart = { + .sources = clkset_uart_list, + .nr_sources = ARRAY_SIZE(clkset_uart_list), }; static struct clk *clkset_audio1_list[] = { @@ -705,30 +516,11 @@ static struct clk *clkset_audio1_list[] = { &clk_mout_hpll.clk, }; -static struct clk_sources clkset_audio1 = { +static struct clksrc_sources clkset_audio1 = { .sources = clkset_audio1_list, .nr_sources = ARRAY_SIZE(clkset_audio1_list), }; -static struct clksrc_clk clk_audio1 = { - .clk = { - .name = "audio-bus", - .id = 1, - .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO1, - .enable = s5pc100_sclk1_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC3_AUDIO1_SHIFT, - .mask = S5PC100_CLKSRC3_AUDIO1_MASK, - .sources = &clkset_audio1, - .divider_shift = S5PC100_CLKDIV4_AUDIO1_SHIFT, - .reg_divider = S5PC100_CLKDIV4, - .reg_source = S5PC100_CLKSRC3, -}; - static struct clk *clkset_audio2_list[] = { &clk_mout_epll.clk, &clk_dout_mpll, @@ -737,52 +529,56 @@ static struct clk *clkset_audio2_list[] = { &clk_mout_hpll.clk, }; -static struct clk_sources clkset_audio2 = { +static struct clksrc_sources clkset_audio2 = { .sources = clkset_audio2_list, .nr_sources = ARRAY_SIZE(clkset_audio2_list), }; -static struct clksrc_clk clk_audio2 = { - .clk = { - .name = "audio-bus", - .id = 2, - .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO2, - .enable = s5pc100_sclk1_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, +static struct clksrc_clk clksrc_audio[] = { + { + .clk = { + .name = "audio-bus", + .id = 0, + .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO0, + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clkset_audio0, + .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 12, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 12, .size = 3, }, + }, { + .clk = { + .name = "audio-bus", + .id = 1, + .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO1, + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clkset_audio1, + .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 16, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 16, .size = 3, }, + }, { + .clk = { + .name = "audio-bus", + .id = 2, + .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO2, + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clkset_audio2, + .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 20, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 20, .size = 3, }, }, - .shift = S5PC100_CLKSRC3_AUDIO2_SHIFT, - .mask = S5PC100_CLKSRC3_AUDIO2_MASK, - .sources = &clkset_audio2, - .divider_shift = S5PC100_CLKDIV4_AUDIO2_SHIFT, - .reg_divider = S5PC100_CLKDIV4, - .reg_source = S5PC100_CLKSRC3, }; static struct clk *clkset_spdif_list[] = { - &clk_audio0.clk, - &clk_audio1.clk, - &clk_audio2.clk, + &clksrc_audio[0].clk, + &clksrc_audio[1].clk, + &clksrc_audio[2].clk, }; -static struct clk_sources clkset_spdif = { +static struct clksrc_sources clkset_spdif = { .sources = clkset_spdif_list, .nr_sources = ARRAY_SIZE(clkset_spdif_list), }; -static struct clksrc_clk clk_spdif = { - .clk = { - .name = "spdif", - .id = -1, - }, - .shift = S5PC100_CLKSRC3_SPDIF_SHIFT, - .mask = S5PC100_CLKSRC3_SPDIF_MASK, - .sources = &clkset_spdif, - .reg_source = S5PC100_CLKSRC3, -}; - static struct clk *clkset_lcd_fimc_list[] = { &clk_mout_epll.clk, &clk_dout_mpll, @@ -790,87 +586,11 @@ static struct clk *clkset_lcd_fimc_list[] = { &clk_vclk_54m, }; -static struct clk_sources clkset_lcd_fimc = { +static struct clksrc_sources clkset_lcd_fimc = { .sources = clkset_lcd_fimc_list, .nr_sources = ARRAY_SIZE(clkset_lcd_fimc_list), }; -static struct clksrc_clk clk_lcd = { - .clk = { - .name = "lcd", - .id = -1, - .ctrlbit = S5PC100_CLKGATE_SCLK1_LCD, - .enable = s5pc100_sclk1_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC2_LCD_SHIFT, - .mask = S5PC100_CLKSRC2_LCD_MASK, - .sources = &clkset_lcd_fimc, - .divider_shift = S5PC100_CLKDIV3_LCD_SHIFT, - .reg_divider = S5PC100_CLKDIV3, - .reg_source = S5PC100_CLKSRC2, -}; - -static struct clksrc_clk clk_fimc0 = { - .clk = { - .name = "fimc", - .id = 0, - .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC0, - .enable = s5pc100_sclk1_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC2_FIMC0_SHIFT, - .mask = S5PC100_CLKSRC2_FIMC0_MASK, - .sources = &clkset_lcd_fimc, - .divider_shift = S5PC100_CLKDIV3_FIMC0_SHIFT, - .reg_divider = S5PC100_CLKDIV3, - .reg_source = S5PC100_CLKSRC2, -}; - -static struct clksrc_clk clk_fimc1 = { - .clk = { - .name = "fimc", - .id = 1, - .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC1, - .enable = s5pc100_sclk1_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC2_FIMC1_SHIFT, - .mask = S5PC100_CLKSRC2_FIMC1_MASK, - .sources = &clkset_lcd_fimc, - .divider_shift = S5PC100_CLKDIV3_FIMC1_SHIFT, - .reg_divider = S5PC100_CLKDIV3, - .reg_source = S5PC100_CLKSRC2, -}; - -static struct clksrc_clk clk_fimc2 = { - .clk = { - .name = "fimc", - .id = 2, - .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC2, - .enable = s5pc100_sclk1_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC2_FIMC2_SHIFT, - .mask = S5PC100_CLKSRC2_FIMC2_MASK, - .sources = &clkset_lcd_fimc, - .divider_shift = S5PC100_CLKDIV3_FIMC2_SHIFT, - .reg_divider = S5PC100_CLKDIV3, - .reg_source = S5PC100_CLKSRC2, -}; - static struct clk *clkset_mmc_list[] = { &clk_mout_epll.clk, &clk_dout_mpll, @@ -878,69 +598,11 @@ static struct clk *clkset_mmc_list[] = { &clk_mout_hpll.clk , }; -static struct clk_sources clkset_mmc = { +static struct clksrc_sources clkset_mmc = { .sources = clkset_mmc_list, .nr_sources = ARRAY_SIZE(clkset_mmc_list), }; -static struct clksrc_clk clk_mmc0 = { - .clk = { - .name = "mmc_bus", - .id = 0, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0, - .enable = s5pc100_sclk0_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC2_MMC0_SHIFT, - .mask = S5PC100_CLKSRC2_MMC0_MASK, - .sources = &clkset_mmc, - .divider_shift = S5PC100_CLKDIV3_MMC0_SHIFT, - .reg_divider = S5PC100_CLKDIV3, - .reg_source = S5PC100_CLKSRC2, -}; - -static struct clksrc_clk clk_mmc1 = { - .clk = { - .name = "mmc_bus", - .id = 1, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1, - .enable = s5pc100_sclk0_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC2_MMC1_SHIFT, - .mask = S5PC100_CLKSRC2_MMC1_MASK, - .sources = &clkset_mmc, - .divider_shift = S5PC100_CLKDIV3_MMC1_SHIFT, - .reg_divider = S5PC100_CLKDIV3, - .reg_source = S5PC100_CLKSRC2, -}; - -static struct clksrc_clk clk_mmc2 = { - .clk = { - .name = "mmc_bus", - .id = 2, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2, - .enable = s5pc100_sclk0_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC2_MMC2_SHIFT, - .mask = S5PC100_CLKSRC2_MMC2_MASK, - .sources = &clkset_mmc, - .divider_shift = S5PC100_CLKDIV3_MMC2_SHIFT, - .reg_divider = S5PC100_CLKDIV3, - .reg_source = S5PC100_CLKSRC2, -}; - - static struct clk *clkset_usbhost_list[] = { &clk_mout_epll.clk, &clk_dout_mpll, @@ -948,28 +610,141 @@ static struct clk *clkset_usbhost_list[] = { &clk_48m, }; -static struct clk_sources clkset_usbhost = { +static struct clksrc_sources clkset_usbhost = { .sources = clkset_usbhost_list, .nr_sources = ARRAY_SIZE(clkset_usbhost_list), }; -static struct clksrc_clk clk_usbhost = { - .clk = { - .name = "usbhost", - .id = -1, - .ctrlbit = S5PC100_CLKGATE_SCLK0_USBHOST, - .enable = s5pc100_sclk0_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC1_UHOST_SHIFT, - .mask = S5PC100_CLKSRC1_UHOST_MASK, - .sources = &clkset_usbhost, - .divider_shift = S5PC100_CLKDIV2_UHOST_SHIFT, - .reg_divider = S5PC100_CLKDIV2, - .reg_source = S5PC100_CLKSRC1, +static struct clksrc_clk clksrc_clks[] = { + { + .clk = { + .name = "spi_bus", + .id = 0, + .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0, + .enable = s5pc100_sclk0_ctrl, + + }, + .sources = &clkset_spi, + .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 4, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 4, .size = 2, }, + }, { + .clk = { + .name = "spi_bus", + .id = 1, + .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1, + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clkset_spi, + .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 8, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 8, .size = 2, }, + }, { + .clk = { + .name = "spi_bus", + .id = 2, + .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2, + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clkset_spi, + .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 12, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 12, .size = 2, }, + }, { + .clk = { + .name = "uclk1", + .id = -1, + .ctrlbit = S5PC100_CLKGATE_SCLK0_UART, + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clkset_uart, + .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 0, .size = 3, }, + .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 0, .size = 1, }, + }, { + .clk = { + .name = "spdif", + .id = -1, + }, + .sources = &clkset_spdif, + .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 24, .size = 2, }, + }, { + .clk = { + .name = "lcd", + .id = -1, + .ctrlbit = S5PC100_CLKGATE_SCLK1_LCD, + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clkset_lcd_fimc, + .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 12, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 12, .size = 2, }, + }, { + .clk = { + .name = "fimc", + .id = 0, + .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC0, + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clkset_lcd_fimc, + .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 16, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 16, .size = 2, }, + }, { + .clk = { + .name = "fimc", + .id = 1, + .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC1, + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clkset_lcd_fimc, + .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 20, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 20, .size = 2, }, + }, { + .clk = { + .name = "fimc", + .id = 2, + .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC2, + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clkset_lcd_fimc, + .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 24, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 24, .size = 2, }, + }, { + .clk = { + .name = "mmc_bus", + .id = 0, + .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0, + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clkset_mmc, + .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 0, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 0, .size = 2, }, + }, { + .clk = { + .name = "mmc_bus", + .id = 1, + .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1, + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clkset_mmc, + .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 4, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 4, .size = 2, }, + }, { + .clk = { + .name = "mmc_bus", + .id = 2, + .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2, + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clkset_mmc, + .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 8, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 8, .size = 2, }, + }, { + .clk = { + .name = "usbhost", + .id = -1, + .ctrlbit = S5PC100_CLKGATE_SCLK0_USBHOST, + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clkset_usbhost, + .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 20, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 20, .size = 2, }, + } }; /* Clock initialisation code */ @@ -981,45 +756,8 @@ static struct clksrc_clk *init_parents[] = { &clk_mout_onenand, &clk_mout_epll, &clk_mout_hpll, - &clk_spi0, - &clk_spi1, - &clk_spi2, - &clk_uart_uclk1, - &clk_audio0, - &clk_audio1, - &clk_audio2, - &clk_spdif, - &clk_lcd, - &clk_fimc0, - &clk_fimc1, - &clk_fimc2, - &clk_mmc0, - &clk_mmc1, - &clk_mmc2, - &clk_usbhost, }; -static void __init_or_cpufreq s5pc100_set_clksrc(struct clksrc_clk *clk) -{ - struct clk_sources *srcs = clk->sources; - u32 clksrc = __raw_readl(clk->reg_source); - - clksrc &= clk->mask; - clksrc >>= clk->shift; - - if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) { - printk(KERN_ERR "%s: bad source %d\n", - clk->clk.name, clksrc); - return; - } - - clk->clk.parent = srcs->sources[clksrc]; - - printk(KERN_INFO "%s: source is %s (%d), rate is %ld.%03ld MHz\n", - clk->clk.name, clk->clk.parent->name, clksrc, - print_mhz(clk_get_rate(&clk->clk))); -} - #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) void __init_or_cpufreq s5pc100_setup_clocks(void) @@ -1083,17 +821,25 @@ void __init_or_cpufreq s5pc100_setup_clocks(void) clk_f.rate = armclk; for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) - s5pc100_set_clksrc(init_parents[ptr]); + s3c_set_clksrc(init_parents[ptr], true); + + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_audio); ptr++) + s3c_set_clksrc(clksrc_audio + ptr, true); + + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++) + s3c_set_clksrc(clksrc_clks + ptr, true); } static struct clk *clks[] __initdata = { &clk_ext_xtal_mux, - &clk_mout_apll.clk, &clk_dout_apll, &clk_dout_d0_bus, &clk_dout_pclkd0, &clk_dout_apll2, + &clk_mout_apll.clk, &clk_mout_mpll.clk, + &clk_mout_epll.clk, + &clk_mout_hpll.clk, &clk_mout_am.clk, &clk_dout_d1_bus, &clk_mout_onenand.clk, @@ -1101,29 +847,12 @@ static struct clk *clks[] __initdata = { &clk_dout_mpll2, &clk_dout_cam, &clk_dout_mpll, - &clk_mout_epll.clk, &clk_fout_epll, &clk_iis_cd0, &clk_iis_cd1, &clk_iis_cd2, &clk_pcm_cd0, &clk_pcm_cd1, - &clk_spi0.clk, - &clk_spi1.clk, - &clk_spi2.clk, - &clk_uart_uclk1.clk, - &clk_audio0.clk, - &clk_audio1.clk, - &clk_audio2.clk, - &clk_spdif.clk, - &clk_lcd.clk, - &clk_fimc0.clk, - &clk_fimc1.clk, - &clk_fimc2.clk, - &clk_mmc0.clk, - &clk_mmc1.clk, - &clk_mmc2.clk, - &clk_usbhost.clk, &clk_arm, }; @@ -1141,4 +870,7 @@ void __init s5pc100_register_clocks(void) clkp->name, ret); } } + + s3c_register_clksrc(clksrc_audio, ARRAY_SIZE(clksrc_audio)); + s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks)); } diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 486a0d6301e..1c2fe91c23e 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -13,5 +13,168 @@ config PLAT_SAMSUNG if PLAT_SAMSUNG +config SAMSUNG_CLKSRC + bool + help + Select the clock code for the clksrc implementation + used by newer systems such as the S3C64XX. + +# options for IRQ support + +config SAMSUNG_IRQ_VIC_TIMER + bool + help + Internal configuration to build the VIC timer interrupt code. + +config SAMSUNG_IRQ_UART + bool + help + Internal configuration to build the IRQ UART demux code. + +# options for gpio configuration support + +config SAMSUNG_GPIOLIB_4BIT + bool + help + GPIOlib file contains the 4 bit modification functions for gpio + configuration. GPIOlib shall be compiled only for S3C64XX and S5P + series of processors. + +config S3C_GPIO_CFG_S3C24XX + bool + help + Internal configuration to enable S3C24XX style GPIO configuration + functions. + +config S3C_GPIO_CFG_S3C64XX + bool + help + Internal configuration to enable S3C64XX style GPIO configuration + functions. + +config S5P_GPIO_CFG_S5PC1XX + bool + help + Internal configuration to enable S5PC1XX style GPIO configuration + functions. + +config S3C_GPIO_PULL_UPDOWN + bool + help + Internal configuration to enable the correct GPIO pull helper + +config S3C_GPIO_PULL_DOWN + bool + help + Internal configuration to enable the correct GPIO pull helper + +config S3C_GPIO_PULL_UP + bool + help + Internal configuration to enable the correct GPIO pull helper + +config SAMSUNG_GPIO_EXTRA + int "Number of additional GPIO pins" + default 0 + help + Use additional GPIO space in addition to the GPIO's the SOC + provides. This allows expanding the GPIO space for use with + GPIO expanders. + +# ADC driver + +config S3C_ADC + bool "ADC common driver support" + help + Core support for the ADC block found in the Samsung SoC systems + for drivers such as the touchscreen and hwmon to use to share + this resource. + +# device definitions to compile in + +config S3C_DEV_HSMMC + bool + help + Compile in platform device definitions for HSMMC code + +config S3C_DEV_HSMMC1 + bool + help + Compile in platform device definitions for HSMMC channel 1 + +config S3C_DEV_HSMMC2 + bool + help + Compile in platform device definitions for HSMMC channel 2 + +config S3C_DEV_I2C1 + bool + help + Compile in platform device definitions for I2C channel 1 + +config S3C_DEV_FB + bool + help + Compile in platform device definition for framebuffer + +config S3C_DEV_USB_HOST + bool + help + Compile in platform device definition for USB host. + +config S3C_DEV_USB_HSOTG + bool + help + Compile in platform device definition for USB high-speed OtG + +config S3C_DEV_NAND + bool + help + Compile in platform device definition for NAND controller + +comment "Power management" + +config SAMSUNG_PM_DEBUG + bool "S3C2410 PM Suspend debug" + depends on PM + help + Say Y here if you want verbose debugging from the PM Suspend and + Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> + for more information. + +config S3C_PM_DEBUG_LED_SMDK + bool "SMDK LED suspend/resume debugging" + depends on PM && (MACH_SMDK6410) + help + Say Y here to enable the use of the SMDK LEDs on the baseboard + for debugging of the state of the suspend and resume process. + + Note, this currently only works for S3C64XX based SMDK boards. + +config SAMSUNG_PM_CHECK + bool "S3C2410 PM Suspend Memory CRC" + depends on PM && CRC32 + help + Enable the PM code's memory area checksum over sleep. This option + will generate CRCs of all blocks of memory, and store them before + going to sleep. The blocks are then checked on resume for any + errors. + + Note, this can take several seconds depending on memory size + and CPU speed. + + See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> + +config SAMSUNG_PM_CHECK_CHUNKSIZE + int "S3C2410 PM Suspend CRC Chunksize (KiB)" + depends on PM && SAMSUNG_PM_CHECK + default 64 + help + Set the chunksize in Kilobytes of the CRC for checking memory + corruption over suspend and resume. A smaller value will mean that + the CRC data block will take more memory, but wil identify any + faults with better precision. + + See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> endif diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 4478b9f7dc3..c8c8caec8cd 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -9,3 +9,41 @@ obj-m := obj-n := dummy.o obj- := +# Objects we always build independent of SoC choice + +obj-y += clock.o +obj-y += pwm-clock.o +obj-y += gpio.o +obj-y += gpio-config.o + +obj-$(CONFIG_SAMSUNG_GPIOLIB_4BIT) += gpiolib.o +obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o + +obj-$(CONFIG_SAMSUNG_IRQ_UART) += irq-uart.o +obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o + +# ADC + +obj-$(CONFIG_S3C_ADC) += adc.o + +# devices + +obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o +obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o +obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o +obj-y += dev-i2c0.o +obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o +obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o +obj-y += dev-uart.o +obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o +obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o +obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o + +# PM support + +obj-$(CONFIG_PM) += pm-gpio.o +obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o + +# PWM support + +obj-$(CONFIG_HAVE_PWM) += pwm.o diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-samsung/adc.c index ce47627f336..c7659b7378b 100644 --- a/arch/arm/plat-s3c24xx/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -1,10 +1,10 @@ -/* arch/arm/plat-s3c24xx/adc.c +/* arch/arm/plat-samsung/adc.c * * Copyright (c) 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org> * - * S3C24XX ADC device core + * Samsung ADC device core * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -37,6 +37,11 @@ * action is required. */ +enum s3c_cpu_type { + TYPE_S3C24XX, + TYPE_S3C64XX +}; + struct s3c_adc_client { struct platform_device *pdev; struct list_head pend; @@ -262,7 +267,7 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw) if (!client) { dev_warn(&adc->pdev->dev, "%s: no adc pending\n", __func__); - return IRQ_HANDLED; + goto exit; } data0 = readl(adc->regs + S3C2410_ADCDAT0); @@ -289,6 +294,11 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw) local_irq_restore(flags); } +exit: + if (platform_get_device_id(adc->pdev)->driver_data == TYPE_S3C64XX) { + /* Clear ADC interrupt */ + writel(0, adc->regs + S3C64XX_ADCCLRINT); + } return IRQ_HANDLED; } @@ -410,9 +420,22 @@ static int s3c_adc_resume(struct platform_device *pdev) #define s3c_adc_resume NULL #endif +static struct platform_device_id s3c_adc_driver_ids[] = { + { + .name = "s3c24xx-adc", + .driver_data = TYPE_S3C24XX, + }, { + .name = "s3c64xx-adc", + .driver_data = TYPE_S3C64XX, + }, + { } +}; +MODULE_DEVICE_TABLE(platform, s3c_adc_driver_ids); + static struct platform_driver s3c_adc_driver = { + .id_table = s3c_adc_driver_ids, .driver = { - .name = "s3c24xx-adc", + .name = "s3c-adc", .owner = THIS_MODULE, }, .probe = s3c_adc_probe, diff --git a/arch/arm/plat-samsung/clock-clksrc.c b/arch/arm/plat-samsung/clock-clksrc.c new file mode 100644 index 00000000000..ae8b8507663 --- /dev/null +++ b/arch/arm/plat-samsung/clock-clksrc.c @@ -0,0 +1,212 @@ +/* linux/arch/arm/plat-samsung/clock-clksrc.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <plat/clock.h> +#include <plat/clock-clksrc.h> +#include <plat/cpu-freq.h> + +static inline struct clksrc_clk *to_clksrc(struct clk *clk) +{ + return container_of(clk, struct clksrc_clk, clk); +} + +static inline u32 bit_mask(u32 shift, u32 nr_bits) +{ + u32 mask = 0xffffffff >> (32 - nr_bits); + + return mask << shift; +} + +static unsigned long s3c_getrate_clksrc(struct clk *clk) +{ + struct clksrc_clk *sclk = to_clksrc(clk); + unsigned long rate = clk_get_rate(clk->parent); + u32 clkdiv = __raw_readl(sclk->reg_div.reg); + u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size); + + clkdiv &= mask; + clkdiv >>= sclk->reg_div.shift; + clkdiv++; + + rate /= clkdiv; + return rate; +} + +static int s3c_setrate_clksrc(struct clk *clk, unsigned long rate) +{ + struct clksrc_clk *sclk = to_clksrc(clk); + void __iomem *reg = sclk->reg_div.reg; + unsigned int div; + u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size); + u32 val; + + rate = clk_round_rate(clk, rate); + div = clk_get_rate(clk->parent) / rate; + if (div > (1 << sclk->reg_div.size)) + return -EINVAL; + + val = __raw_readl(reg); + val &= ~mask; + val |= (div - 1) << sclk->reg_div.shift; + __raw_writel(val, reg); + + return 0; +} + +static int s3c_setparent_clksrc(struct clk *clk, struct clk *parent) +{ + struct clksrc_clk *sclk = to_clksrc(clk); + struct clksrc_sources *srcs = sclk->sources; + u32 clksrc = __raw_readl(sclk->reg_src.reg); + u32 mask = bit_mask(sclk->reg_src.shift, sclk->reg_src.size); + int src_nr = -1; + int ptr; + + for (ptr = 0; ptr < srcs->nr_sources; ptr++) + if (srcs->sources[ptr] == parent) { + src_nr = ptr; + break; + } + + if (src_nr >= 0) { + clk->parent = parent; + + clksrc &= ~mask; + clksrc |= src_nr << sclk->reg_src.shift; + + __raw_writel(clksrc, sclk->reg_src.reg); + return 0; + } + + return -EINVAL; +} + +static unsigned long s3c_roundrate_clksrc(struct clk *clk, + unsigned long rate) +{ + struct clksrc_clk *sclk = to_clksrc(clk); + unsigned long parent_rate = clk_get_rate(clk->parent); + int max_div = 1 << sclk->reg_div.size; + int div; + + if (rate >= parent_rate) + rate = parent_rate; + else { + div = parent_rate / rate; + if (parent_rate % rate) + div++; + + if (div == 0) + div = 1; + if (div > max_div) + div = max_div; + + rate = parent_rate / div; + } + + return rate; +} + +/* Clock initialisation code */ + +void __init_or_cpufreq s3c_set_clksrc(struct clksrc_clk *clk, bool announce) +{ + struct clksrc_sources *srcs = clk->sources; + u32 mask = bit_mask(clk->reg_src.shift, clk->reg_src.size); + u32 clksrc; + + if (!clk->reg_src.reg) { + if (!clk->clk.parent) + printk(KERN_ERR "%s: no parent clock specified\n", + clk->clk.name); + return; + } + + clksrc = __raw_readl(clk->reg_src.reg); + clksrc &= mask; + clksrc >>= clk->reg_src.shift; + + if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) { + printk(KERN_ERR "%s: bad source %d\n", + clk->clk.name, clksrc); + return; + } + + clk->clk.parent = srcs->sources[clksrc]; + + if (announce) + printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n", + clk->clk.name, clk->clk.parent->name, clksrc, + clk_get_rate(&clk->clk)); +} + +static struct clk_ops clksrc_ops = { + .set_parent = s3c_setparent_clksrc, + .get_rate = s3c_getrate_clksrc, + .set_rate = s3c_setrate_clksrc, + .round_rate = s3c_roundrate_clksrc, +}; + +static struct clk_ops clksrc_ops_nodiv = { + .set_parent = s3c_setparent_clksrc, +}; + +static struct clk_ops clksrc_ops_nosrc = { + .get_rate = s3c_getrate_clksrc, + .set_rate = s3c_setrate_clksrc, + .round_rate = s3c_roundrate_clksrc, +}; + +void __init s3c_register_clksrc(struct clksrc_clk *clksrc, int size) +{ + int ret; + + for (; size > 0; size--, clksrc++) { + if (!clksrc->reg_div.reg && !clksrc->reg_src.reg) + printk(KERN_ERR "%s: clock %s has no registers set\n", + __func__, clksrc->clk.name); + + /* fill in the default functions */ + + if (!clksrc->clk.ops) { + if (!clksrc->reg_div.reg) + clksrc->clk.ops = &clksrc_ops_nodiv; + else if (!clksrc->reg_src.reg) + clksrc->clk.ops = &clksrc_ops_nosrc; + else + clksrc->clk.ops = &clksrc_ops; + } + + /* setup the clocksource, but do not announce it + * as it may be re-set by the setup routines + * called after the rest of the clocks have been + * registered + */ + s3c_set_clksrc(clksrc, false); + + ret = s3c24xx_register_clock(&clksrc->clk); + + if (ret < 0) { + printk(KERN_ERR "%s: failed to register %s (%d)\n", + __func__, clksrc->clk.name, ret); + } + } +} diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-samsung/clock.c index 619cfa82dca..e9cdbe47beb 100644 --- a/arch/arm/plat-s3c/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -150,8 +150,8 @@ unsigned long clk_get_rate(struct clk *clk) if (clk->rate != 0) return clk->rate; - if (clk->get_rate != NULL) - return (clk->get_rate)(clk); + if (clk->ops != NULL && clk->ops->get_rate != NULL) + return (clk->ops->get_rate)(clk); if (clk->parent != NULL) return clk_get_rate(clk->parent); @@ -161,8 +161,8 @@ unsigned long clk_get_rate(struct clk *clk) long clk_round_rate(struct clk *clk, unsigned long rate) { - if (!IS_ERR(clk) && clk->round_rate) - return (clk->round_rate)(clk, rate); + if (!IS_ERR(clk) && clk->ops && clk->ops->round_rate) + return (clk->ops->round_rate)(clk, rate); return rate; } @@ -178,13 +178,14 @@ int clk_set_rate(struct clk *clk, unsigned long rate) * the clock may have been made this way by choice. */ - WARN_ON(clk->set_rate == NULL); + WARN_ON(clk->ops == NULL); + WARN_ON(clk->ops && clk->ops->set_rate == NULL); - if (clk->set_rate == NULL) + if (clk->ops == NULL || clk->ops->set_rate == NULL) return -EINVAL; spin_lock(&clocks_lock); - ret = (clk->set_rate)(clk, rate); + ret = (clk->ops->set_rate)(clk, rate); spin_unlock(&clocks_lock); return ret; @@ -204,8 +205,8 @@ int clk_set_parent(struct clk *clk, struct clk *parent) spin_lock(&clocks_lock); - if (clk->set_parent) - ret = (clk->set_parent)(clk, parent); + if (clk->ops && clk->ops->set_parent) + ret = (clk->ops->set_parent)(clk, parent); spin_unlock(&clocks_lock); @@ -224,12 +225,16 @@ EXPORT_SYMBOL(clk_set_parent); /* base clocks */ -static int clk_default_setrate(struct clk *clk, unsigned long rate) +int clk_default_setrate(struct clk *clk, unsigned long rate) { clk->rate = rate; return 0; } +struct clk_ops clk_ops_def_setrate = { + .set_rate = clk_default_setrate, +}; + struct clk clk_xtal = { .name = "xtal", .id = -1, @@ -251,7 +256,7 @@ struct clk clk_epll = { struct clk clk_mpll = { .name = "mpll", .id = -1, - .set_rate = clk_default_setrate, + .ops = &clk_ops_def_setrate, }; struct clk clk_upll = { @@ -267,7 +272,6 @@ struct clk clk_f = { .rate = 0, .parent = &clk_mpll, .ctrlbit = 0, - .set_rate = clk_default_setrate, }; struct clk clk_h = { @@ -276,7 +280,7 @@ struct clk clk_h = { .rate = 0, .parent = NULL, .ctrlbit = 0, - .set_rate = clk_default_setrate, + .ops = &clk_ops_def_setrate, }; struct clk clk_p = { @@ -285,7 +289,7 @@ struct clk clk_p = { .rate = 0, .parent = NULL, .ctrlbit = 0, - .set_rate = clk_default_setrate, + .ops = &clk_ops_def_setrate, }; struct clk clk_usb_bus = { @@ -296,7 +300,6 @@ struct clk clk_usb_bus = { }; - struct clk s3c24xx_uclk = { .name = "uclk", .id = -1, @@ -333,6 +336,28 @@ int s3c24xx_register_clocks(struct clk **clks, int nr_clks) return fails; } +/** + * s3c_register_clocks() - register an array of clocks + * @clkp: Pointer to the first clock in the array. + * @nr_clks: Number of clocks to register. + * + * Call s3c24xx_register_clock() on the @clkp array given, printing an + * error if it fails to register the clock (unlikely). + */ +void __init s3c_register_clocks(struct clk *clkp, int nr_clks) +{ + int ret; + + for (; nr_clks > 0; nr_clks--, clkp++) { + ret = s3c24xx_register_clock(clkp); + + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + } +} + /* initalise all the clocks */ int __init s3c24xx_register_baseclocks(unsigned long xtal) diff --git a/arch/arm/plat-s3c/dev-fb.c b/arch/arm/plat-samsung/dev-fb.c index a90198fc4b0..a90198fc4b0 100644 --- a/arch/arm/plat-s3c/dev-fb.c +++ b/arch/arm/plat-samsung/dev-fb.c diff --git a/arch/arm/plat-s3c/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c index 4c05b39810e..4c05b39810e 100644 --- a/arch/arm/plat-s3c/dev-hsmmc.c +++ b/arch/arm/plat-samsung/dev-hsmmc.c diff --git a/arch/arm/plat-s3c/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c index e49bc4cd0ee..e49bc4cd0ee 100644 --- a/arch/arm/plat-s3c/dev-hsmmc1.c +++ b/arch/arm/plat-samsung/dev-hsmmc1.c diff --git a/arch/arm/plat-s3c/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c index 824580bc0e0..824580bc0e0 100644 --- a/arch/arm/plat-s3c/dev-hsmmc2.c +++ b/arch/arm/plat-samsung/dev-hsmmc2.c diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-samsung/dev-i2c0.c index 4c761529b94..4c761529b94 100644 --- a/arch/arm/plat-s3c/dev-i2c0.c +++ b/arch/arm/plat-samsung/dev-i2c0.c diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-samsung/dev-i2c1.c index d44f7911050..d44f7911050 100644 --- a/arch/arm/plat-s3c/dev-i2c1.c +++ b/arch/arm/plat-samsung/dev-i2c1.c diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-samsung/dev-nand.c index a52fb6cf618..a52fb6cf618 100644 --- a/arch/arm/plat-s3c/dev-nand.c +++ b/arch/arm/plat-samsung/dev-nand.c diff --git a/arch/arm/plat-samsung/dev-uart.c b/arch/arm/plat-samsung/dev-uart.c new file mode 100644 index 00000000000..3776cd95245 --- /dev/null +++ b/arch/arm/plat-samsung/dev-uart.c @@ -0,0 +1,44 @@ +/* linux/arch/arm/plat-samsung/dev-uart.c + * originally from arch/arm/plat-s3c24xx/devs.c + *x + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Base S3C24XX platform device definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include <linux/kernel.h> +#include <linux/platform_device.h> + +/* uart devices */ + +static struct platform_device s3c24xx_uart_device0 = { + .id = 0, +}; + +static struct platform_device s3c24xx_uart_device1 = { + .id = 1, +}; + +static struct platform_device s3c24xx_uart_device2 = { + .id = 2, +}; + +static struct platform_device s3c24xx_uart_device3 = { + .id = 3, +}; + +struct platform_device *s3c24xx_uart_src[4] = { + &s3c24xx_uart_device0, + &s3c24xx_uart_device1, + &s3c24xx_uart_device2, + &s3c24xx_uart_device3, +}; + +struct platform_device *s3c24xx_uart_devs[4] = { +}; diff --git a/arch/arm/plat-s3c/dev-usb-hsotg.c b/arch/arm/plat-samsung/dev-usb-hsotg.c index e2f604b51c8..e2f604b51c8 100644 --- a/arch/arm/plat-s3c/dev-usb-hsotg.c +++ b/arch/arm/plat-samsung/dev-usb-hsotg.c diff --git a/arch/arm/plat-s3c/dev-usb.c b/arch/arm/plat-samsung/dev-usb.c index 2ee85abed6d..88165657fa5 100644 --- a/arch/arm/plat-s3c/dev-usb.c +++ b/arch/arm/plat-samsung/dev-usb.c @@ -19,7 +19,7 @@ #include <mach/map.h> #include <plat/devs.h> - +#include <plat/usb-control.h> static struct resource s3c_usb_resource[] = { [0] = { @@ -36,7 +36,7 @@ static struct resource s3c_usb_resource[] = { static u64 s3c_device_usb_dmamask = 0xffffffffUL; -struct platform_device s3c_device_usb = { +struct platform_device s3c_device_ohci = { .name = "s3c2410-ohci", .id = -1, .num_resources = ARRAY_SIZE(s3c_usb_resource), @@ -47,4 +47,23 @@ struct platform_device s3c_device_usb = { } }; -EXPORT_SYMBOL(s3c_device_usb); +EXPORT_SYMBOL(s3c_device_ohci); + +/** + * s3c_ohci_set_platdata - initialise OHCI device platform data + * @info: The platform data. + * + * This call copies the @info passed in and sets the device .platform_data + * field to that copy. The @info is copied so that the original can be marked + * __initdata. + */ +void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info) +{ + struct s3c2410_hcd_info *npd; + + npd = kmemdup(info, sizeof(struct s3c2410_hcd_info), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + + s3c_device_ohci.dev.platform_data = npd; +} diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c index 456969b6fa0..44a84e89654 100644 --- a/arch/arm/plat-s3c/gpio-config.c +++ b/arch/arm/plat-samsung/gpio-config.c @@ -17,7 +17,7 @@ #include <linux/gpio.h> #include <linux/io.h> -#include <mach/gpio-core.h> +#include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-samsung/gpio.c index 5ff24e0f9f8..28d2ab8a08d 100644 --- a/arch/arm/plat-s3c/gpio.c +++ b/arch/arm/plat-samsung/gpio.c @@ -16,7 +16,7 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <mach/gpio-core.h> +#include <plat/gpio-core.h> #ifdef CONFIG_S3C_GPIO_TRACK struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; diff --git a/arch/arm/plat-samsung/gpiolib.c b/arch/arm/plat-samsung/gpiolib.c new file mode 100644 index 00000000000..8a8ba8bc1d9 --- /dev/null +++ b/arch/arm/plat-samsung/gpiolib.c @@ -0,0 +1,199 @@ +/* arch/arm/plat-samsung/gpiolib.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * SAMSUNG - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <mach/gpio.h> +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> + +#ifndef DEBUG_GPIO +#define gpio_dbg(x...) do { } while (0) +#else +#define gpio_dbg(x...) printk(KERN_DEBUG x) +#endif + +/* The samsung_gpiolib_4bit routines are to control the gpio banks where + * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the + * following example: + * + * base + 0x00: Control register, 4 bits per gpio + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Data register, 1 bit per gpio + * bit n: data bit n + * + * Note, since the data register is one bit per gpio and is at base + 0x4 + * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of + * the output. +*/ + +static int samsung_gpiolib_4bit_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + + con = __raw_readl(base + GPIOCON_OFF); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, base + GPIOCON_OFF); + + gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); + + return 0; +} + +static int samsung_gpiolib_4bit_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + unsigned long dat; + + con = __raw_readl(base + GPIOCON_OFF); + con &= ~(0xf << con_4bit_shift(offset)); + con |= 0x1 << con_4bit_shift(offset); + + dat = __raw_readl(base + GPIODAT_OFF); + + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + GPIODAT_OFF); + __raw_writel(con, base + GPIOCON_OFF); + __raw_writel(dat, base + GPIODAT_OFF); + + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +/* The next set of routines are for the case where the GPIO configuration + * registers are 4 bits per GPIO but there is more than one register (the + * bank has more than 8 GPIOs. + * + * This case is the similar to the 4 bit case, but the registers are as + * follows: + * + * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs) + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs) + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x08: Data register, 1 bit per gpio + * bit n: data bit n + * + * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we + * store the 'base + 0x4' address so that these routines see the data + * register at ourchip->base + 0x04. + */ + +static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + + if (offset > 7) + offset -= 8; + else + regcon -= 4; + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, regcon); + + gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con); + + return 0; +} + +static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + unsigned long dat; + unsigned con_offset = offset; + + if (con_offset > 7) + con_offset -= 8; + else + regcon -= 4; + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(con_offset)); + con |= 0x1 << con_4bit_shift(con_offset); + + dat = __raw_readl(base + GPIODAT_OFF); + + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + GPIODAT_OFF); + __raw_writel(con, regcon); + __raw_writel(dat, base + GPIODAT_OFF); + + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip) +{ + chip->chip.direction_input = samsung_gpiolib_4bit_input; + chip->chip.direction_output = samsung_gpiolib_4bit_output; + chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); +} + +void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip) +{ + chip->chip.direction_input = samsung_gpiolib_4bit2_input; + chip->chip.direction_output = samsung_gpiolib_4bit2_output; + chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); +} + +void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) { + samsung_gpiolib_add_4bit(chip); + s3c_gpiolib_add(chip); + } +} + +void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) { + samsung_gpiolib_add_4bit2(chip); + s3c_gpiolib_add(chip); + } +} diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-samsung/include/plat/adc.h index 5f3b1cd53b9..e8382c7be10 100644 --- a/arch/arm/plat-s3c/include/plat/adc.h +++ b/arch/arm/plat-samsung/include/plat/adc.h @@ -1,10 +1,10 @@ -/* arch/arm/plat-s3c/include/plat/adc.h +/* arch/arm/plat-samsung/include/plat/adc.h * * Copyright (c) 2008 Simtec Electronics * http://armlinux.simnte.co.uk/ * Ben Dooks <ben@simtec.co.uk> * - * S3C24XX ADC driver information + * S3C ADC driver information * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/plat-samsung/include/plat/clock-clksrc.h b/arch/arm/plat-samsung/include/plat/clock-clksrc.h new file mode 100644 index 00000000000..50a8ca7c376 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/clock-clksrc.h @@ -0,0 +1,83 @@ +/* linux/arch/arm/plat-samsung/include/plat/clock-clksrc.h + * + * Parts taken from arch/arm/plat-s3c64xx/clock.c + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Copyright 2009 Ben Dooks <ben-linux@fluff.org> + * Copyright 2009 Harald Welte + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/** + * struct clksrc_sources - list of sources for a given clock + * @sources: array of pointers to clocks + * @nr_sources: The size of @sources + */ +struct clksrc_sources { + unsigned int nr_sources; + struct clk **sources; +}; + +/** + * struct clksrc_reg - register definition for clock control bits + * @reg: pointer to the register in virtual memory. + * @shift: the shift in bits to where the bitfield is. + * @size: the size in bits of the bitfield. + * + * This specifies the size and position of the bits we are interested + * in within the register specified by @reg. + */ +struct clksrc_reg { + void __iomem *reg; + unsigned short shift; + unsigned short size; +}; + +/** + * struct clksrc_clk - class of clock for newer style samsung devices. + * @clk: the standard clock representation + * @sources: the sources for this clock + * @reg_src: the register definition for selecting the clock's source + * @reg_div: the register definition for the clock's output divisor + * + * This clock implements the features required by the newer SoCs where + * the standard clock block provides an input mux and a post-mux divisor + * to provide the periperhal's clock. + * + * The array of @sources provides the mapping of mux position to the + * clock, and @reg_src shows the code where to modify to change the mux + * position. The @reg_div defines how to change the divider settings on + * the output. + */ +struct clksrc_clk { + struct clk clk; + struct clksrc_sources *sources; + + struct clksrc_reg reg_src; + struct clksrc_reg reg_div; +}; + +/** + * s3c_set_clksrc() - setup the clock from the register settings + * @clk: The clock to setup. + * @announce: true to announce the setting to printk(). + * + * Setup the clock from the current register settings, for when the + * kernel boots or if it is resuming from a possibly unknown state. + */ +extern void s3c_set_clksrc(struct clksrc_clk *clk, bool announce); + +/** + * s3c_register_clksrc() register clocks from an array of clksrc clocks + * @srcs: The array of clocks to register + * @size: The size of the @srcs array. + * + * Initialise and register the array of clocks described by @srcs. + */ +extern void s3c_register_clksrc(struct clksrc_clk *srcs, int size); diff --git a/arch/arm/plat-s3c/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index d86af84b5b8..ba9a1cdd3a2 100644 --- a/arch/arm/plat-s3c/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -11,6 +11,30 @@ #include <linux/spinlock.h> +struct clk; + +/** + * struct clk_ops - standard clock operations + * @set_rate: set the clock rate, see clk_set_rate(). + * @get_rate: get the clock rate, see clk_get_rate(). + * @round_rate: round a given clock rate, see clk_round_rate(). + * @set_parent: set the clock's parent, see clk_set_parent(). + * + * Group the common clock implementations together so that we + * don't have to keep setting the same fiels again. We leave + * enable in struct clk. + * + * Adding an extra layer of indirection into the process should + * not be a problem as it is unlikely these operations are going + * to need to be called quickly. + */ +struct clk_ops { + int (*set_rate)(struct clk *c, unsigned long rate); + unsigned long (*get_rate)(struct clk *c); + unsigned long (*round_rate)(struct clk *c, unsigned long rate); + int (*set_parent)(struct clk *c, struct clk *parent); +}; + struct clk { struct list_head list; struct module *owner; @@ -21,11 +45,8 @@ struct clk { unsigned long rate; unsigned long ctrlbit; + struct clk_ops *ops; int (*enable)(struct clk *, int enable); - int (*set_rate)(struct clk *c, unsigned long rate); - unsigned long (*get_rate)(struct clk *c); - unsigned long (*round_rate)(struct clk *c, unsigned long rate); - int (*set_parent)(struct clk *c, struct clk *parent); }; /* other clocks which may be registered by board support */ @@ -54,6 +75,9 @@ extern struct clk clk_h2; extern struct clk clk_27m; extern struct clk clk_48m; +extern int clk_default_setrate(struct clk *clk, unsigned long rate); +extern struct clk_ops clk_ops_def_setrate; + /* exports for arch/arm/mach-s3c2410 * * Please DO NOT use these outside of arch/arm/mach-s3c2410 @@ -66,9 +90,12 @@ extern int s3c2410_clkcon_enable(struct clk *clk, int enable); extern int s3c24xx_register_clock(struct clk *clk); extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks); +extern void s3c_register_clocks(struct clk *clk, int nr_clks); + extern int s3c24xx_register_baseclocks(unsigned long xtal); extern void s3c64xx_register_clocks(void); +extern void s5p_register_clocks(unsigned long xtal_freq); extern void s3c24xx_setup_clocks(unsigned long fclk, unsigned long hclk, diff --git a/arch/arm/plat-s3c/include/plat/dma-core.h b/arch/arm/plat-samsung/include/plat/dma-core.h index 32ff2a92cb3..32ff2a92cb3 100644 --- a/arch/arm/plat-s3c/include/plat/dma-core.h +++ b/arch/arm/plat-samsung/include/plat/dma-core.h diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index 652e2bbdaa2..652e2bbdaa2 100644 --- a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index 29cd6a86cad..29cd6a86cad 100644 --- a/arch/arm/plat-s3c/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h diff --git a/arch/arm/plat-s3c/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index 32af612767a..49ff406a706 100644 --- a/arch/arm/plat-s3c/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -11,6 +11,11 @@ * published by the Free Software Foundation. */ +#define GPIOCON_OFF (0x00) +#define GPIODAT_OFF (0x04) + +#define con_4bit_shift(__off) ((__off) * 4) + /* Define the core gpiolib support functions that the s3c platforms may * need to extend or change depending on the hardware and the s3c chip * selected at build or found at run time. @@ -80,6 +85,29 @@ extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip); * and any other necessary functions. */ +/** + * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config. + * @chip: The gpio chip that is being configured. + * @nr_chips: The no of chips (gpio ports) for the GPIO being configured. + * + * This helper deal with the GPIO cases where the control register has 4 bits + * of control per GPIO, generally in the form of: + * 0000 = Input + * 0001 = Output + * others = Special functions (dependant on bank) + * + * Note, since the code to deal with the case where there are two control + * registers instead of one, we do not have a seperate set of function + * (samsung_gpiolib_add_4bit2_chips)for each case. + */ +extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip, + int nr_chips); +extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, + int nr_chips); + +extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip); +extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip); + #ifdef CONFIG_S3C_GPIO_TRACK extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; @@ -90,6 +118,8 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip) #else /* machine specific code should provide s3c_gpiolib_getchip */ +#include <mach/gpio-track.h> + static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { } #endif diff --git a/arch/arm/plat-s3c/include/plat/hwmon.h b/arch/arm/plat-samsung/include/plat/hwmon.h index 1ba88ea0aa3..1ba88ea0aa3 100644 --- a/arch/arm/plat-s3c/include/plat/hwmon.h +++ b/arch/arm/plat-samsung/include/plat/hwmon.h diff --git a/arch/arm/plat-s3c/include/plat/iic-core.h b/arch/arm/plat-samsung/include/plat/iic-core.h index 36397ca2096..36397ca2096 100644 --- a/arch/arm/plat-s3c/include/plat/iic-core.h +++ b/arch/arm/plat-samsung/include/plat/iic-core.h diff --git a/arch/arm/plat-s3c/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h index 3083df00dee..3083df00dee 100644 --- a/arch/arm/plat-s3c/include/plat/iic.h +++ b/arch/arm/plat-samsung/include/plat/iic.h diff --git a/arch/arm/plat-samsung/include/plat/irq-uart.h b/arch/arm/plat-samsung/include/plat/irq-uart.h new file mode 100644 index 00000000000..a9331e49bea --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/irq-uart.h @@ -0,0 +1,20 @@ +/* arch/arm/plat-samsung/include/plat/irq-uart.h + * + * Copyright (c) 2010 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Header file for Samsung SoC UART IRQ demux for S3C64XX and later + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct s3c_uart_irq { + void __iomem *regs; + unsigned int base_irq; + unsigned int parent_irq; +}; + +extern void s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs); + diff --git a/arch/arm/plat-samsung/include/plat/irq-vic-timer.h b/arch/arm/plat-samsung/include/plat/irq-vic-timer.h new file mode 100644 index 00000000000..a90b53431b5 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/irq-vic-timer.h @@ -0,0 +1,13 @@ +/* arch/arm/plat-samsung/include/plat/irq-vic-timer.h + * + * Copyright (c) 2010 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Header file for Samsung SoC IRQ VIC timer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern void s3c_init_vic_timer_irq(unsigned int vic, unsigned int timer); diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-samsung/include/plat/nand.h index 226147b7e02..226147b7e02 100644 --- a/arch/arm/plat-s3c/include/plat/nand.h +++ b/arch/arm/plat-samsung/include/plat/nand.h diff --git a/arch/arm/plat-s3c/include/plat/regs-ac97.h b/arch/arm/plat-samsung/include/plat/regs-ac97.h index c3878f7acb8..c3878f7acb8 100644 --- a/arch/arm/plat-s3c/include/plat/regs-ac97.h +++ b/arch/arm/plat-samsung/include/plat/regs-ac97.h diff --git a/arch/arm/plat-s3c/include/plat/regs-adc.h b/arch/arm/plat-samsung/include/plat/regs-adc.h index 4323cccc86c..f43c8dab39e 100644 --- a/arch/arm/plat-s3c/include/plat/regs-adc.h +++ b/arch/arm/plat-samsung/include/plat/regs-adc.h @@ -19,6 +19,9 @@ #define S3C2410_ADCDLY S3C2410_ADCREG(0x08) #define S3C2410_ADCDAT0 S3C2410_ADCREG(0x0C) #define S3C2410_ADCDAT1 S3C2410_ADCREG(0x10) +#define S3C64XX_ADCUPDN S3C2410_ADCREG(0x14) +#define S3C64XX_ADCCLRINT S3C2410_ADCREG(0x18) +#define S3C64XX_ADCCLRINTPNDNUP S3C2410_ADCREG(0x20) /* ADCCON Register Bits */ diff --git a/arch/arm/plat-s3c/include/plat/regs-iic.h b/arch/arm/plat-samsung/include/plat/regs-iic.h index 2f7c17de8ac..2f7c17de8ac 100644 --- a/arch/arm/plat-s3c/include/plat/regs-iic.h +++ b/arch/arm/plat-samsung/include/plat/regs-iic.h diff --git a/arch/arm/plat-s3c/include/plat/regs-irqtype.h b/arch/arm/plat-samsung/include/plat/regs-irqtype.h index c63cd3fc5ad..c63cd3fc5ad 100644 --- a/arch/arm/plat-s3c/include/plat/regs-irqtype.h +++ b/arch/arm/plat-samsung/include/plat/regs-irqtype.h diff --git a/arch/arm/plat-s3c/include/plat/regs-nand.h b/arch/arm/plat-samsung/include/plat/regs-nand.h index 238efea7b9e..238efea7b9e 100644 --- a/arch/arm/plat-s3c/include/plat/regs-nand.h +++ b/arch/arm/plat-samsung/include/plat/regs-nand.h diff --git a/arch/arm/plat-s3c/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h index d5837cf8e40..d5837cf8e40 100644 --- a/arch/arm/plat-s3c/include/plat/regs-rtc.h +++ b/arch/arm/plat-samsung/include/plat/regs-rtc.h diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h index abf2fbc2eb2..abf2fbc2eb2 100644 --- a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h +++ b/arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h diff --git a/arch/arm/plat-s3c/include/plat/regs-sdhci.h b/arch/arm/plat-samsung/include/plat/regs-sdhci.h index e34049ad44c..e34049ad44c 100644 --- a/arch/arm/plat-s3c/include/plat/regs-sdhci.h +++ b/arch/arm/plat-samsung/include/plat/regs-sdhci.h diff --git a/arch/arm/plat-s3c/include/plat/regs-timer.h b/arch/arm/plat-samsung/include/plat/regs-timer.h index d097d92f8cc..d097d92f8cc 100644 --- a/arch/arm/plat-s3c/include/plat/regs-timer.h +++ b/arch/arm/plat-samsung/include/plat/regs-timer.h diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h index 36a85f5000c..36a85f5000c 100644 --- a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h +++ b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h index 8d18d9d4d14..8d18d9d4d14 100644 --- a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h +++ b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h diff --git a/arch/arm/plat-s3c/include/plat/regs-watchdog.h b/arch/arm/plat-samsung/include/plat/regs-watchdog.h index 4938492470f..4938492470f 100644 --- a/arch/arm/plat-s3c/include/plat/regs-watchdog.h +++ b/arch/arm/plat-samsung/include/plat/regs-watchdog.h diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h new file mode 100644 index 00000000000..d1772414931 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -0,0 +1,67 @@ +/* linux/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h + * + * Copyright (C) 2009 Samsung Electronics Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __S3C64XX_PLAT_SPI_H +#define __S3C64XX_PLAT_SPI_H + +/** + * struct s3c64xx_spi_csinfo - ChipSelect description + * @fb_delay: Slave specific feedback delay. + * Refer to FB_CLK_SEL register definition in SPI chapter. + * @line: Custom 'identity' of the CS line. + * @set_level: CS line control. + * + * This is per SPI-Slave Chipselect information. + * Allocate and initialize one in machine init code and make the + * spi_board_info.controller_data point to it. + */ +struct s3c64xx_spi_csinfo { + u8 fb_delay; + unsigned line; + void (*set_level)(unsigned line_id, int lvl); +}; + +/** + * struct s3c64xx_spi_info - SPI Controller defining structure + * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field. + * @src_clk_name: Platform name of the corresponding clock. + * @num_cs: Number of CS this controller emulates. + * @cfg_gpio: Configure pins for this SPI controller. + * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6 + * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number + * @high_speed: If the controller supports HIGH_SPEED_EN bit + */ +struct s3c64xx_spi_info { + int src_clk_nr; + char *src_clk_name; + + int num_cs; + + int (*cfg_gpio)(struct platform_device *pdev); + + /* Following two fields are for future compatibility */ + int fifo_lvl_mask; + int rx_lvl_offset; + int high_speed; +}; + +/** + * s3c64xx_spi_set_info - SPI Controller configure callback by the board + * initialization code. + * @cntrlr: SPI controller number the configuration is for. + * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks. + * @num_cs: Number of elements in the 'cs' array. + * + * Call this from machine init code for each SPI Controller that + * has some chips attached to it. + */ +extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); + +#endif /* __S3C64XX_PLAT_SPI_H */ diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 53198673b6b..53198673b6b 100644 --- a/arch/arm/plat-s3c/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h diff --git a/arch/arm/plat-s3c/include/plat/udc-hs.h b/arch/arm/plat-samsung/include/plat/udc-hs.h index dd04db04310..a22a4f2eea9 100644 --- a/arch/arm/plat-s3c/include/plat/udc-hs.h +++ b/arch/arm/plat-samsung/include/plat/udc-hs.h @@ -12,7 +12,7 @@ * published by the Free Software Foundation. */ -enum s3c_hostg_dmamode { +enum s3c_hsotg_dmamode { S3C_HSOTG_DMA_NONE, /* do not use DMA at-all */ S3C_HSOTG_DMA_ONLY, /* always use DMA */ S3C_HSOTG_DMA_DRV, /* DMA is chosen by driver */ @@ -24,6 +24,6 @@ enum s3c_hostg_dmamode { * @is_osc: The clock source is an oscillator, not a crystal */ struct s3c_hsotg_plat { - enum s3c_hostg_dmamode dma; + enum s3c_hsotg_dmamode dma; unsigned int is_osc : 1; }; diff --git a/arch/arm/plat-s3c/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h index 54b762acb5a..54b762acb5a 100644 --- a/arch/arm/plat-s3c/include/plat/watchdog-reset.h +++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c new file mode 100644 index 00000000000..4f8c102674a --- /dev/null +++ b/arch/arm/plat-samsung/irq-uart.c @@ -0,0 +1,143 @@ +/* arch/arm/plat-samsung/irq-uart.c + * originally part of arch/arm/plat-s3c64xx/irq.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Samsung- UART Interrupt handling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/serial_core.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <mach/map.h> +#include <plat/irq-uart.h> +#include <plat/regs-serial.h> +#include <plat/cpu.h> + +/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3] + * are consecutive when looking up the interrupt in the demux routines. + */ + +static inline void __iomem *s3c_irq_uart_base(unsigned int irq) +{ + struct s3c_uart_irq *uirq = get_irq_chip_data(irq); + return uirq->regs; +} + +static inline unsigned int s3c_irq_uart_bit(unsigned int irq) +{ + return irq & 3; +} + +static void s3c_irq_uart_mask(unsigned int irq) +{ + void __iomem *regs = s3c_irq_uart_base(irq); + unsigned int bit = s3c_irq_uart_bit(irq); + u32 reg; + + reg = __raw_readl(regs + S3C64XX_UINTM); + reg |= (1 << bit); + __raw_writel(reg, regs + S3C64XX_UINTM); +} + +static void s3c_irq_uart_maskack(unsigned int irq) +{ + void __iomem *regs = s3c_irq_uart_base(irq); + unsigned int bit = s3c_irq_uart_bit(irq); + u32 reg; + + reg = __raw_readl(regs + S3C64XX_UINTM); + reg |= (1 << bit); + __raw_writel(reg, regs + S3C64XX_UINTM); + __raw_writel(1 << bit, regs + S3C64XX_UINTP); +} + +static void s3c_irq_uart_unmask(unsigned int irq) +{ + void __iomem *regs = s3c_irq_uart_base(irq); + unsigned int bit = s3c_irq_uart_bit(irq); + u32 reg; + + reg = __raw_readl(regs + S3C64XX_UINTM); + reg &= ~(1 << bit); + __raw_writel(reg, regs + S3C64XX_UINTM); +} + +static void s3c_irq_uart_ack(unsigned int irq) +{ + void __iomem *regs = s3c_irq_uart_base(irq); + unsigned int bit = s3c_irq_uart_bit(irq); + + __raw_writel(1 << bit, regs + S3C64XX_UINTP); +} + +static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc) +{ + struct s3c_uart_irq *uirq = desc->handler_data; + u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP); + int base = uirq->base_irq; + + if (pend & (1 << 0)) + generic_handle_irq(base); + if (pend & (1 << 1)) + generic_handle_irq(base + 1); + if (pend & (1 << 2)) + generic_handle_irq(base + 2); + if (pend & (1 << 3)) + generic_handle_irq(base + 3); +} + +static struct irq_chip s3c_irq_uart = { + .name = "s3c-uart", + .mask = s3c_irq_uart_mask, + .unmask = s3c_irq_uart_unmask, + .mask_ack = s3c_irq_uart_maskack, + .ack = s3c_irq_uart_ack, +}; + +static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq) +{ + struct irq_desc *desc = irq_to_desc(uirq->parent_irq); + void __iomem *reg_base = uirq->regs; + unsigned int irq; + int offs; + + /* mask all interrupts at the start. */ + __raw_writel(0xf, reg_base + S3C64XX_UINTM); + + for (offs = 0; offs < 3; offs++) { + irq = uirq->base_irq + offs; + + set_irq_chip(irq, &s3c_irq_uart); + set_irq_chip_data(irq, uirq); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } + + desc->handler_data = uirq; + set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart); +} + +/** + * s3c_init_uart_irqs() - initialise UART IRQs and the necessary demuxing + * @irq: The interrupt data for registering + * @nr_irqs: The number of interrupt descriptions in @irq. + * + * Register the UART interrupts specified by @irq including the demuxing + * routines. This supports the S3C6400 and newer style of devices. + */ +void __init s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs) +{ + for (; nr_irqs > 0; nr_irqs--, irq++) + s3c_init_uart_irq(irq); +} diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c new file mode 100644 index 00000000000..0270519fcab --- /dev/null +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -0,0 +1,86 @@ +/* arch/arm/plat-samsung/irq-vic-timer.c + * originally part of arch/arm/plat-s3c64xx/irq.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX - Interrupt handling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <mach/map.h> +#include <plat/irq-vic-timer.h> +#include <plat/regs-timer.h> + +static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc) +{ + generic_handle_irq((int)desc->handler_data); +} + +/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */ + +static void s3c_irq_timer_mask(unsigned int irq) +{ + u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); + + reg &= 0x1f; /* mask out pending interrupts */ + reg &= ~(1 << (irq - IRQ_TIMER0)); + __raw_writel(reg, S3C64XX_TINT_CSTAT); +} + +static void s3c_irq_timer_unmask(unsigned int irq) +{ + u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); + + reg &= 0x1f; /* mask out pending interrupts */ + reg |= 1 << (irq - IRQ_TIMER0); + __raw_writel(reg, S3C64XX_TINT_CSTAT); +} + +static void s3c_irq_timer_ack(unsigned int irq) +{ + u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); + + reg &= 0x1f; + reg |= (1 << 5) << (irq - IRQ_TIMER0); + __raw_writel(reg, S3C64XX_TINT_CSTAT); +} + +static struct irq_chip s3c_irq_timer = { + .name = "s3c-timer", + .mask = s3c_irq_timer_mask, + .unmask = s3c_irq_timer_unmask, + .ack = s3c_irq_timer_ack, +}; + +/** + * s3c_init_vic_timer_irq() - initialise timer irq chanined off VIC.\ + * @parent_irq: The parent IRQ on the VIC for the timer. + * @timer_irq: The IRQ to be used for the timer. + * + * Register the necessary IRQ chaining and support for the timer IRQs + * chained of the VIC. + */ +void __init s3c_init_vic_timer_irq(unsigned int parent_irq, + unsigned int timer_irq) +{ + struct irq_desc *desc = irq_to_desc(parent_irq); + + set_irq_chained_handler(parent_irq, s3c_irq_demux_vic_timer); + + set_irq_chip(timer_irq, &s3c_irq_timer); + set_irq_handler(timer_irq, handle_level_irq); + set_irq_flags(timer_irq, IRQF_VALID); + + desc->handler_data = (void *)timer_irq; +} diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-samsung/pm-check.c index 8eb1f439861..0b5bb774192 100644 --- a/arch/arm/plat-s3c/pm-check.c +++ b/arch/arm/plat-samsung/pm-check.c @@ -20,8 +20,8 @@ #include <plat/pm.h> -#if CONFIG_S3C2410_PM_CHECK_CHUNKSIZE < 1 -#error CONFIG_S3C2410_PM_CHECK_CHUNKSIZE must be a positive non-zero value +#if CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE < 1 +#error CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE must be a positive non-zero value #endif /* suspend checking code... @@ -29,12 +29,12 @@ * this next area does a set of crc checks over all the installed * memory, so the system can verify if the resume was ok. * - * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC, + * CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE defines the block-size for the CRC, * increasing it will mean that the area corrupted will be less easy to spot, * and reducing the size will cause the CRC save area to grow */ -#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024) +#define CHECK_CHUNKSIZE (CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE * 1024) static u32 crc_size; /* size needed for the crc block */ static u32 *crcs; /* allocated over suspend/resume */ diff --git a/arch/arm/plat-s3c/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c index cfd326a8b69..69a4c7f02e2 100644 --- a/arch/arm/plat-s3c/pm-gpio.c +++ b/arch/arm/plat-samsung/pm-gpio.c @@ -19,7 +19,7 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <mach/gpio-core.h> +#include <plat/gpio-core.h> #include <plat/pm.h> /* PM GPIO helpers */ diff --git a/arch/arm/plat-s3c/pwm-clock.c b/arch/arm/plat-samsung/pwm-clock.c index a318215ab53..46c9381e083 100644 --- a/arch/arm/plat-s3c/pwm-clock.c +++ b/arch/arm/plat-samsung/pwm-clock.c @@ -130,20 +130,22 @@ static int clk_pwm_scaler_set_rate(struct clk *clk, unsigned long rate) return 0; } +static struct clk_ops clk_pwm_scaler_ops = { + .get_rate = clk_pwm_scaler_get_rate, + .set_rate = clk_pwm_scaler_set_rate, + .round_rate = clk_pwm_scaler_round_rate, +}; + static struct clk clk_timer_scaler[] = { [0] = { .name = "pwm-scaler0", .id = -1, - .get_rate = clk_pwm_scaler_get_rate, - .set_rate = clk_pwm_scaler_set_rate, - .round_rate = clk_pwm_scaler_round_rate, + .ops = &clk_pwm_scaler_ops, }, [1] = { .name = "pwm-scaler1", .id = -1, - .get_rate = clk_pwm_scaler_get_rate, - .set_rate = clk_pwm_scaler_set_rate, - .round_rate = clk_pwm_scaler_round_rate, + .ops = &clk_pwm_scaler_ops, }, }; @@ -256,50 +258,46 @@ static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate) return 0; } +static struct clk_ops clk_tdiv_ops = { + .get_rate = clk_pwm_tdiv_get_rate, + .set_rate = clk_pwm_tdiv_set_rate, + .round_rate = clk_pwm_tdiv_round_rate, +}; + static struct pwm_tdiv_clk clk_timer_tdiv[] = { [0] = { .clk = { - .name = "pwm-tdiv", - .parent = &clk_timer_scaler[0], - .get_rate = clk_pwm_tdiv_get_rate, - .set_rate = clk_pwm_tdiv_set_rate, - .round_rate = clk_pwm_tdiv_round_rate, + .name = "pwm-tdiv", + .ops = &clk_tdiv_ops, + .parent = &clk_timer_scaler[0], }, }, [1] = { .clk = { - .name = "pwm-tdiv", - .parent = &clk_timer_scaler[0], - .get_rate = clk_pwm_tdiv_get_rate, - .set_rate = clk_pwm_tdiv_set_rate, - .round_rate = clk_pwm_tdiv_round_rate, + .name = "pwm-tdiv", + .ops = &clk_tdiv_ops, + .parent = &clk_timer_scaler[0], } }, [2] = { .clk = { - .name = "pwm-tdiv", - .parent = &clk_timer_scaler[1], - .get_rate = clk_pwm_tdiv_get_rate, - .set_rate = clk_pwm_tdiv_set_rate, - .round_rate = clk_pwm_tdiv_round_rate, + .name = "pwm-tdiv", + .ops = &clk_tdiv_ops, + .parent = &clk_timer_scaler[1], }, }, [3] = { .clk = { - .name = "pwm-tdiv", - .parent = &clk_timer_scaler[1], - .get_rate = clk_pwm_tdiv_get_rate, - .set_rate = clk_pwm_tdiv_set_rate, - .round_rate = clk_pwm_tdiv_round_rate, + .name = "pwm-tdiv", + .ops = &clk_tdiv_ops, + .parent = &clk_timer_scaler[1], }, }, [4] = { .clk = { - .name = "pwm-tdiv", - .parent = &clk_timer_scaler[1], - .get_rate = clk_pwm_tdiv_get_rate, - .set_rate = clk_pwm_tdiv_set_rate, - .round_rate = clk_pwm_tdiv_round_rate, + .name = "pwm-tdiv", + .ops = &clk_tdiv_ops, + .parent = &clk_timer_scaler[1], }, }, }; @@ -356,31 +354,35 @@ static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent) return 0; } +static struct clk_ops clk_tin_ops = { + .set_parent = clk_pwm_tin_set_parent, +}; + static struct clk clk_tin[] = { [0] = { - .name = "pwm-tin", - .id = 0, - .set_parent = clk_pwm_tin_set_parent, + .name = "pwm-tin", + .id = 0, + .ops = &clk_tin_ops, }, [1] = { - .name = "pwm-tin", - .id = 1, - .set_parent = clk_pwm_tin_set_parent, + .name = "pwm-tin", + .id = 1, + .ops = &clk_tin_ops, }, [2] = { - .name = "pwm-tin", - .id = 2, - .set_parent = clk_pwm_tin_set_parent, + .name = "pwm-tin", + .id = 2, + .ops = &clk_tin_ops, }, [3] = { - .name = "pwm-tin", - .id = 3, - .set_parent = clk_pwm_tin_set_parent, + .name = "pwm-tin", + .id = 3, + .ops = &clk_tin_ops, }, [4] = { - .name = "pwm-tin", - .id = 4, - .set_parent = clk_pwm_tin_set_parent, + .name = "pwm-tin", + .id = 4, + .ops = &clk_tin_ops, }, }; @@ -428,25 +430,15 @@ __init void s3c_pwmclk_init(void) return; } - for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) { + for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) clk_timer_scaler[clk].parent = clk_timers; - ret = s3c24xx_register_clock(&clk_timer_scaler[clk]); - if (ret < 0) { - printk(KERN_ERR "error adding pwm scaler%d clock\n", clk); - return; - } - } - for (clk = 0; clk < ARRAY_SIZE(clk_timer_tclk); clk++) { - ret = s3c24xx_register_clock(&clk_timer_tclk[clk]); - if (ret < 0) { - printk(KERN_ERR "error adding pww tclk%d\n", clk); - return; - } - } + s3c_register_clocks(clk_timer_scaler, ARRAY_SIZE(clk_timer_scaler)); + s3c_register_clocks(clk_timer_tclk, ARRAY_SIZE(clk_timer_tclk)); for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) { ret = clk_pwm_tdiv_register(clk); + if (ret < 0) { printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk); return; diff --git a/arch/arm/plat-s3c/pwm.c b/arch/arm/plat-samsung/pwm.c index ef019f27b67..ef019f27b67 100644 --- a/arch/arm/plat-s3c/pwm.c +++ b/arch/arm/plat-samsung/pwm.c |