diff options
Diffstat (limited to 'arch')
137 files changed, 5687 insertions, 2383 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3f8718fc405..ae0ecdaf353 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -297,6 +297,15 @@ config ARCH_CLPS711X help Support for Cirrus Logic 711x/721x based boards. +config ARCH_CNS3XXX + bool "Cavium Networks CNS3XXX family" + select CPU_V6 + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select ARM_GIC + help + Support for Cavium Networks CNS3XXX platform. + config ARCH_GEMINI bool "Cortina Systems Gemini" select CPU_FA526 @@ -601,14 +610,15 @@ config ARCH_PXA config ARCH_MSM bool "Qualcomm MSM" - select CPU_V6 + select HAVE_CLK select GENERIC_TIME select GENERIC_CLOCKEVENTS help - Support for Qualcomm MSM7K based systems. This runs on the ARM11 - apps processor of the MSM7K and depends on a shared memory - interface to the ARM9 modem processor which runs the baseband stack - and controls some vital subsystems (clock and power control, etc). + Support for Qualcomm MSM/QSD based systems. This runs on the + apps processor of the MSM/QSD and depends on a shared memory + interface to the modem processor which runs the baseband + stack and controls some vital subsystems + (clock and power control, etc). config ARCH_SHMOBILE bool "Renesas SH-Mobile" @@ -821,6 +831,8 @@ source "arch/arm/mach-bcmring/Kconfig" source "arch/arm/mach-clps711x/Kconfig" +source "arch/arm/mach-cns3xxx/Kconfig" + source "arch/arm/mach-davinci/Kconfig" source "arch/arm/mach-dove/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 15947397e12..7cdaf5afcee 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -121,6 +121,7 @@ machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 machine-$(CONFIG_ARCH_AT91) := at91 machine-$(CONFIG_ARCH_BCMRING) := bcmring machine-$(CONFIG_ARCH_CLPS711X) := clps711x +machine-$(CONFIG_ARCH_CNS3XXX) := cns3xxx machine-$(CONFIG_ARCH_DAVINCI) := davinci machine-$(CONFIG_ARCH_DOVE) := dove machine-$(CONFIG_ARCH_EBSA110) := ebsa110 diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 6ab6b337a91..c5191b1532e 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -685,8 +685,8 @@ proc_types: W(b) __armv4_mmu_cache_off W(b) __armv4_mmu_cache_flush - .word 0x56056930 - .word 0xff0ffff0 @ PXA935 + .word 0x56056900 + .word 0xffffff00 @ PXA9xx W(b) __armv4_mmu_cache_on W(b) __armv4_mmu_cache_off W(b) __armv4_mmu_cache_flush @@ -697,12 +697,6 @@ proc_types: W(b) __armv4_mmu_cache_off W(b) __armv5tej_mmu_cache_flush - .word 0x56056930 - .word 0xff0ffff0 @ PXA935 - W(b) __armv4_mmu_cache_on - W(b) __armv4_mmu_cache_off - W(b) __armv4_mmu_cache_flush - .word 0x56050000 @ Feroceon .word 0xff0f0000 W(b) __armv4_mmu_cache_on diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig new file mode 100644 index 00000000000..d5c088149e4 --- /dev/null +++ b/arch/arm/configs/cns3420vb_defconfig @@ -0,0 +1,831 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.34-rc6 +# Sun May 2 21:58:08 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_OPROFILE_ARMV6=y +CONFIG_OPROFILE_ARM11_CORE=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +# CONFIG_CGROUP_NS is not set +# CONFIG_CGROUP_FREEZER is not set +# CONFIG_CGROUP_DEVICE is not set +# CONFIG_CPUSETS is not set +# CONFIG_CGROUP_CPUACCT is not set +# CONFIG_RESOURCE_COUNTERS is not set +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_SLOW_WORK=y +# CONFIG_SLOW_WORK_DEBUG is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=m +# CONFIG_CFQ_GROUP_IOSCHED is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_CLPS711X is not set +CONFIG_ARCH_CNS3XXX=y +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PV210 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# CNS3XXX platform type +# +CONFIG_MACH_CNS3420VB=y + +# +# Processor Type +# +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_V6=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_CPU_HAS_PMU=y +# CONFIG_ARM_ERRATA_411920 is not set +CONFIG_ARM_GIC=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=20000 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +# CONFIG_SATA_PMP is not set +# CONFIG_ATA_SFF is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# Caches +# +CONFIG_FSCACHE=y +# CONFIG_FSCACHE_STATS is not set +# CONFIG_FSCACHE_HISTOGRAM is not set +# CONFIG_FSCACHE_DEBUG is not set +# CONFIG_FSCACHE_OBJECT_LIST is not set +# CONFIG_CACHEFILES is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_FRAME_POINTER=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LKDTM is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_ARM_UNWIND is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_OC_ETM is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig index 95d2becfc66..21f2bff8a36 100644 --- a/arch/arm/configs/imote2_defconfig +++ b/arch/arm/configs/imote2_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc8 -# Sat Feb 13 21:48:53 2010 +# Linux kernel version: 2.6.34-rc2 +# Thu Apr 8 14:49:08 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_HAVE_PROC_CPU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -19,6 +20,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_ARCH_MTD_XIP=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 @@ -60,11 +62,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -97,10 +94,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y @@ -184,6 +185,7 @@ CONFIG_MMU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set @@ -193,7 +195,6 @@ CONFIG_MMU=y # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -210,21 +211,26 @@ CONFIG_MMU=y # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set CONFIG_ARCH_PXA=y # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set # CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_BCMRING is not set -# CONFIG_ARCH_U8500 is not set # # Intel PXA2xx/PXA3xx Implementations @@ -253,6 +259,7 @@ CONFIG_ARCH_PXA=y # CONFIG_MACH_EM_X270 is not set # CONFIG_MACH_EXEDA is not set # CONFIG_MACH_CM_X300 is not set +# CONFIG_MACH_CAPC7117 is not set # CONFIG_ARCH_GUMSTIX is not set CONFIG_MACH_INTELMOTE2=y # CONFIG_MACH_STARGATE2 is not set @@ -275,7 +282,11 @@ CONFIG_MACH_INTELMOTE2=y # CONFIG_PXA_EZX is not set # CONFIG_MACH_MP900C is not set # CONFIG_ARCH_PXA_PALM is not set +# CONFIG_MACH_RAUMFELD_RC is not set +# CONFIG_MACH_RAUMFELD_CONNECTOR is not set +# CONFIG_MACH_RAUMFELD_SPEAKER is not set # CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_ICONTROL is not set # CONFIG_ARCH_PXA_ESERIES is not set CONFIG_PXA27x=y CONFIG_PXA_SSP=y @@ -302,6 +313,7 @@ CONFIG_ARM_THUMB=y CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_IWMMXT=y CONFIG_XSCALE_PMU=y +CONFIG_CPU_HAS_PMU=y CONFIG_COMMON_CLKDEV=y # @@ -352,7 +364,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug" +CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M" # CONFIG_XIP_KERNEL is not set CONFIG_KEXEC=y CONFIG_ATAGS_PROC=y @@ -360,24 +372,8 @@ CONFIG_ATAGS_PROC=y # # CPU Power Management # -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -CONFIG_CPU_FREQ_DEBUG=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=m -CONFIG_CPU_FREQ_GOV_USERSPACE=m -CONFIG_CPU_FREQ_GOV_ONDEMAND=m -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -409,6 +405,7 @@ CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_APM_EMULATION=y CONFIG_PM_RUNTIME=y +CONFIG_PM_OPS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -416,7 +413,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -506,6 +502,7 @@ CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_CT is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_LED=m @@ -622,6 +619,7 @@ CONFIG_IP6_NF_RAW=m # CONFIG_ATM is not set CONFIG_STP=m CONFIG_BRIDGE=m +# CONFIG_BRIDGE_IGMP_SNOOPING is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set @@ -646,32 +644,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set -CONFIG_BT=y -CONFIG_BT_L2CAP=y -CONFIG_BT_SCO=y -CONFIG_BT_RFCOMM=y -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=y -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=y - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIBTUSB=m -CONFIG_BT_HCIBTSDIO=m -CONFIG_BT_HCIUART=y -CONFIG_BT_HCIUART_H4=y -# CONFIG_BT_HCIUART_BCSP is not set -# CONFIG_BT_HCIUART_LL is not set -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIVHCI=m -CONFIG_BT_MRVL=m -CONFIG_BT_MRVL_SDIO=m -# CONFIG_BT_ATH3K is not set +# CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y # CONFIG_WIRELESS is not set @@ -687,7 +660,8 @@ CONFIG_FIB_RULES=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_DEVTMPFS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m @@ -703,9 +677,9 @@ CONFIG_MTD=y # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_AFS_PARTS=y +CONFIG_MTD_AR7_PARTS=y # # User Modules And Translation Layers @@ -812,6 +786,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -965,6 +940,7 @@ CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -993,6 +969,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_PXA=y # CONFIG_I2C_PXA_SLAVE is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1006,15 +983,9 @@ CONFIG_I2C_PXA=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -1046,10 +1017,12 @@ CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set @@ -1093,10 +1066,12 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set @@ -1105,22 +1080,25 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TC6393XB is not set CONFIG_PMIC_DA903X=y # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_AB4500_CORE is not set CONFIG_REGULATOR=y CONFIG_REGULATOR_DEBUG=y +# CONFIG_REGULATOR_DUMMY is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_USERSPACE_CONSUMER=y # CONFIG_REGULATOR_BQ24022 is not set # CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_MAX8649 is not set # CONFIG_REGULATOR_MAX8660 is not set CONFIG_REGULATOR_DA903X=y # CONFIG_REGULATOR_LP3971 is not set @@ -1218,6 +1196,7 @@ CONFIG_VIDEO_IR_I2C=y # CONFIG_VIDEO_SAA7191 is not set # CONFIG_VIDEO_TVP514X is not set # CONFIG_VIDEO_TVP5150 is not set +# CONFIG_VIDEO_TVP7002 is not set # CONFIG_VIDEO_VPX3220 is not set # @@ -1264,15 +1243,7 @@ CONFIG_SOC_CAMERA_MT9M111=y CONFIG_VIDEO_PXA27x=y # CONFIG_VIDEO_SH_MOBILE_CEU is not set # CONFIG_V4L_USB_DRIVERS is not set -CONFIG_RADIO_ADAPTERS=y -# CONFIG_I2C_SI4713 is not set -# CONFIG_RADIO_SI4713 is not set -# CONFIG_USB_DSBR is not set -# CONFIG_RADIO_SI470X is not set -# CONFIG_USB_MR800 is not set -CONFIG_RADIO_TEA5764=y -CONFIG_RADIO_TEA5764_XTAL=y -# CONFIG_RADIO_TEF6862 is not set +# CONFIG_RADIO_ADAPTERS is not set # CONFIG_DAB is not set # @@ -1398,8 +1369,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_APPLE=m -# CONFIG_HID_WACOM is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1477,7 +1446,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1489,7 +1457,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set @@ -1529,6 +1496,7 @@ CONFIG_USB_ETH=y # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_NOKIA is not set # CONFIG_USB_G_MULTI is not set # @@ -1555,8 +1523,6 @@ CONFIG_SDIO_UART=m # CONFIG_MMC_PXA=y # CONFIG_MMC_SDHCI is not set -# CONFIG_MMC_AT91 is not set -# CONFIG_MMC_ATMELMCI is not set CONFIG_MMC_SPI=y # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y @@ -1574,11 +1540,11 @@ CONFIG_LEDS_LP3944=y # CONFIG_LEDS_REGULATOR is not set # CONFIG_LEDS_BD2802 is not set # CONFIG_LEDS_LT3593 is not set +CONFIG_LEDS_TRIGGERS=y # # LED Triggers # -CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_BACKLIGHT=y @@ -1656,7 +1622,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # # CONFIG_RTC_DRV_SA1100 is not set -# CONFIG_RTC_DRV_PXA is not set +CONFIG_RTC_DRV_PXA=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set @@ -1681,19 +1647,10 @@ CONFIG_EXT3_FS_XATTR=y CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=m -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_XFS_FS=m -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_DEBUG is not set +# CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set @@ -1716,9 +1673,7 @@ CONFIG_CUSE=m # # CD-ROM/DVD Filesystems # -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y +# CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # @@ -1750,12 +1705,14 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_FS_WBUF_VERIFY=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_LZO=y @@ -1765,6 +1722,7 @@ CONFIG_JFFS2_RUBIN=y CONFIG_JFFS2_CMODE_PRIORITY=y # CONFIG_JFFS2_CMODE_SIZE is not set # CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=m CONFIG_SQUASHFS=m # CONFIG_SQUASHFS_EMBEDDED is not set @@ -1802,6 +1760,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CEPH_FS is not set CONFIG_CIFS=m CONFIG_CIFS_STATS=y # CONFIG_CIFS_STATS2 is not set @@ -1895,6 +1854,7 @@ CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y +# CONFIG_PROVE_RCU is not set CONFIG_LOCKDEP=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_LOCKDEP is not set @@ -1918,6 +1878,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set @@ -2061,9 +2022,9 @@ CONFIG_CRC32=y CONFIG_CRC7=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_LZO_COMPRESS=m -CONFIG_LZO_DECOMPRESS=m +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y @@ -2075,3 +2036,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig index 03f76cfc941..4b55dcb6002 100644 --- a/arch/arm/configs/mmp2_defconfig +++ b/arch/arm/configs/mmp2_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc2 -# Tue Jan 5 13:55:22 2010 +# Linux kernel version: 2.6.34-rc5 +# Wed Apr 28 11:23:19 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_HAVE_PROC_CPU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,6 +19,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -32,6 +34,12 @@ CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y @@ -52,7 +60,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -85,10 +92,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y CONFIG_SLAB=y @@ -104,6 +115,7 @@ CONFIG_HAVE_CLK=y # # GCOV-based kernel profiling # +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -170,6 +182,7 @@ CONFIG_MMU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set @@ -179,7 +192,6 @@ CONFIG_MMU=y # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -196,21 +208,26 @@ CONFIG_ARCH_MMP=y # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set # CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_BCMRING is not set -# CONFIG_ARCH_U8500 is not set # CONFIG_MACH_TAVOREVB is not set # @@ -218,8 +235,10 @@ CONFIG_ARCH_MMP=y # # CONFIG_MACH_ASPENITE is not set # CONFIG_MACH_ZYLONITE2 is not set +# CONFIG_MACH_AVENGERS_LITE is not set # CONFIG_MACH_TTC_DKB is not set CONFIG_MACH_FLINT=y +CONFIG_MACH_MARVELL_JASPER=y CONFIG_CPU_MMP2=y CONFIG_PLAT_PXA=y @@ -246,7 +265,10 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_OUTER_CACHE=y +CONFIG_CACHE_TAUROS2=y CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_411920 is not set CONFIG_COMMON_CLKDEV=y @@ -298,7 +320,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M user_debug=255" +CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -338,7 +360,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -532,6 +553,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -640,6 +662,7 @@ CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -667,6 +690,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_PXA=y # CONFIG_I2C_PXA_SLAVE is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -679,15 +703,9 @@ CONFIG_I2C_PXA=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -702,13 +720,16 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -737,10 +758,12 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # CONFIG_MFD_CORE=y +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set @@ -749,24 +772,27 @@ CONFIG_MFD_CORE=y # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +CONFIG_MFD_MAX8925=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -CONFIG_MFD_88PM8607=y CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_DUMMY is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set # CONFIG_REGULATOR_MAX1586 is not set -CONFIG_REGULATOR_MAX8660=y +CONFIG_REGULATOR_MAX8649=y +# CONFIG_REGULATOR_MAX8660 is not set +CONFIG_REGULATOR_MAX8925=y # CONFIG_REGULATOR_LP3971 is not set # CONFIG_REGULATOR_TPS65023 is not set # CONFIG_REGULATOR_TPS6507X is not set -CONFIG_REGULATOR_88PM8607=y # CONFIG_MEDIA_SUPPORT is not set # @@ -781,6 +807,7 @@ CONFIG_LCD_CLASS_DEVICE=y # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=y +CONFIG_BACKLIGHT_MAX8925=y # # Display device support @@ -821,6 +848,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_MAX8925=y # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_X1205 is not set @@ -872,7 +900,6 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set -CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y @@ -883,7 +910,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set @@ -940,6 +967,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -967,6 +995,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -990,7 +1019,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set @@ -1032,6 +1061,7 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set @@ -1052,6 +1082,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_DYNAMIC_DEBUG=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1059,9 +1090,7 @@ CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set -CONFIG_DEBUG_LL=y -# CONFIG_EARLY_PRINTK is not set -# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_DEBUG_LL is not set # CONFIG_OC_ETM is not set # diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index bff056489cc..51662feb9f1 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -9,6 +9,8 @@ #include <asm/ptrace.h> #include <asm/user.h> +struct task_struct; + typedef unsigned long elf_greg_t; typedef unsigned long elf_freg_t[3]; diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index e6a0fb0f392..7ee48e7f8f3 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -676,10 +676,10 @@ do_fpe: * lr = unrecognised FP instruction return address */ - .data + .pushsection .data ENTRY(fp_enter) .word no_fp - .text + .popsection ENTRY(no_fp) mov pc, lr diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 577543f3857..a01194e583f 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -86,6 +86,12 @@ int __cpuinit __cpu_up(unsigned int cpu) return PTR_ERR(idle); } ci->idle = idle; + } else { + /* + * Since this idle thread is being re-used, call + * init_idle() to reinitialize the thread structure. + */ + init_idle(idle, cpu); } /* diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig new file mode 100644 index 00000000000..9ebfcc46feb --- /dev/null +++ b/arch/arm/mach-cns3xxx/Kconfig @@ -0,0 +1,12 @@ +menu "CNS3XXX platform type" + depends on ARCH_CNS3XXX + +config MACH_CNS3420VB + bool "Support for CNS3420 Validation Board" + help + Include support for the Cavium Networks CNS3420 MPCore Platform + Baseboard. + This is a platform with an on-board ARM11 MPCore and has support + for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc. + +endmenu diff --git a/arch/arm/mach-cns3xxx/Makefile b/arch/arm/mach-cns3xxx/Makefile new file mode 100644 index 00000000000..427507a2d69 --- /dev/null +++ b/arch/arm/mach-cns3xxx/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_ARCH_CNS3XXX) += core.o pm.o +obj-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o diff --git a/arch/arm/mach-cns3xxx/Makefile.boot b/arch/arm/mach-cns3xxx/Makefile.boot new file mode 100644 index 00000000000..77701286522 --- /dev/null +++ b/arch/arm/mach-cns3xxx/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00C00000 diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c new file mode 100644 index 00000000000..2e30c828874 --- /dev/null +++ b/arch/arm/mach-cns3xxx/cns3420vb.c @@ -0,0 +1,148 @@ +/* + * Cavium Networks CNS3420 Validation Board + * + * Copyright 2000 Deep Blue Solutions Ltd + * Copyright 2008 ARM Limited + * Copyright 2008 Cavium Networks + * Scott Shu + * Copyright 2010 MontaVista Software, LLC. + * Anton Vorontsov <avorontsov@mvista.com> + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/compiler.h> +#include <linux/io.h> +#include <linux/serial_core.h> +#include <linux/serial_8250.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/partitions.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <mach/hardware.h> +#include <mach/cns3xxx.h> +#include <mach/irqs.h> +#include "core.h" + +/* + * NOR Flash + */ +static struct mtd_partition cns3420_nor_partitions[] = { + { + .name = "uboot", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .size = 0x004C0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "filesystem", + .size = 0x7000000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "filesystem2", + .size = 0x0AE0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "ubootenv", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, +}; + +static struct physmap_flash_data cns3420_nor_pdata = { + .width = 2, + .parts = cns3420_nor_partitions, + .nr_parts = ARRAY_SIZE(cns3420_nor_partitions), +}; + +static struct resource cns3420_nor_res = { + .start = CNS3XXX_FLASH_BASE, + .end = CNS3XXX_FLASH_BASE + SZ_128M - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, +}; + +static struct platform_device cns3420_nor_pdev = { + .name = "physmap-flash", + .id = 0, + .resource = &cns3420_nor_res, + .num_resources = 1, + .dev = { + .platform_data = &cns3420_nor_pdata, + }, +}; + +/* + * UART + */ +static void __init cns3420_early_serial_setup(void) +{ +#ifdef CONFIG_SERIAL_8250_CONSOLE + static struct uart_port cns3420_serial_port = { + .membase = (void __iomem *)CNS3XXX_UART0_BASE_VIRT, + .mapbase = CNS3XXX_UART0_BASE, + .irq = IRQ_CNS3XXX_UART0, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, + .regshift = 2, + .uartclk = 24000000, + .line = 0, + .type = PORT_16550A, + .fifosize = 16, + }; + + early_serial_setup(&cns3420_serial_port); +#endif +} + +/* + * Initialization + */ +static struct platform_device *cns3420_pdevs[] __initdata = { + &cns3420_nor_pdev, +}; + +static void __init cns3420_init(void) +{ + platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs)); + + pm_power_off = cns3xxx_power_off; +} + +static struct map_desc cns3420_io_desc[] __initdata = { + { + .virtual = CNS3XXX_UART0_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_UART0_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void __init cns3420_map_io(void) +{ + cns3xxx_map_io(); + iotable_init(cns3420_io_desc, ARRAY_SIZE(cns3420_io_desc)); + + cns3420_early_serial_setup(); +} + +MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board") + .phys_io = CNS3XXX_UART0_BASE, + .io_pg_offst = (CNS3XXX_UART0_BASE_VIRT >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = cns3420_map_io, + .init_irq = cns3xxx_init_irq, + .timer = &cns3xxx_timer, + .init_machine = cns3420_init, +MACHINE_END diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c new file mode 100644 index 00000000000..9ca4d581016 --- /dev/null +++ b/arch/arm/mach-cns3xxx/core.c @@ -0,0 +1,249 @@ +/* + * Copyright 1999 - 2003 ARM Limited + * Copyright 2000 Deep Blue Solutions Ltd + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/clockchips.h> +#include <linux/io.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <asm/mach/irq.h> +#include <asm/hardware/gic.h> +#include <mach/cns3xxx.h> +#include "core.h" + +static struct map_desc cns3xxx_io_desc[] __initdata = { + { + .virtual = CNS3XXX_TC11MP_TWD_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_TIMER1_2_3_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_TIMER1_2_3_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_GPIOA_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_GPIOA_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_GPIOB_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_GPIOB_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_MISC_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_MISC_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_PM_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_PM_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +void __init cns3xxx_map_io(void) +{ + iotable_init(cns3xxx_io_desc, ARRAY_SIZE(cns3xxx_io_desc)); +} + +/* used by entry-macro.S */ +void __iomem *gic_cpu_base_addr; + +void __init cns3xxx_init_irq(void) +{ + gic_cpu_base_addr = __io(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT); + gic_dist_init(0, __io(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT), 29); + gic_cpu_init(0, gic_cpu_base_addr); +} + +void cns3xxx_power_off(void) +{ + u32 __iomem *pm_base = __io(CNS3XXX_PM_BASE_VIRT); + u32 clkctrl; + + printk(KERN_INFO "powering system down...\n"); + + clkctrl = readl(pm_base + PM_SYS_CLK_CTRL_OFFSET); + clkctrl &= 0xfffff1ff; + clkctrl |= (0x5 << 9); /* Hibernate */ + writel(clkctrl, pm_base + PM_SYS_CLK_CTRL_OFFSET); + +} + +/* + * Timer + */ +static void __iomem *cns3xxx_tmr1; + +static void cns3xxx_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *clk) +{ + unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); + int pclk = cns3xxx_cpu_clock() / 8; + int reload; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + reload = pclk * 20 / (3 * HZ) * 0x25000; + writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET); + ctrl |= (1 << 0) | (1 << 2) | (1 << 9); + break; + case CLOCK_EVT_MODE_ONESHOT: + /* period set, and timer enabled in 'next_event' hook */ + ctrl |= (1 << 2) | (1 << 9); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + default: + ctrl = 0; + } + + writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); +} + +static int cns3xxx_timer_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); + + writel(evt, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET); + writel(ctrl | (1 << 0), cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); + + return 0; +} + +static struct clock_event_device cns3xxx_tmr1_clockevent = { + .name = "cns3xxx timer1", + .shift = 8, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = cns3xxx_timer_set_mode, + .set_next_event = cns3xxx_timer_set_next_event, + .rating = 350, + .cpumask = cpu_all_mask, +}; + +static void __init cns3xxx_clockevents_init(unsigned int timer_irq) +{ + cns3xxx_tmr1_clockevent.irq = timer_irq; + cns3xxx_tmr1_clockevent.mult = + div_sc((cns3xxx_cpu_clock() >> 3) * 1000000, NSEC_PER_SEC, + cns3xxx_tmr1_clockevent.shift); + cns3xxx_tmr1_clockevent.max_delta_ns = + clockevent_delta2ns(0xffffffff, &cns3xxx_tmr1_clockevent); + cns3xxx_tmr1_clockevent.min_delta_ns = + clockevent_delta2ns(0xf, &cns3xxx_tmr1_clockevent); + + clockevents_register_device(&cns3xxx_tmr1_clockevent); +} + +/* + * IRQ handler for the timer + */ +static irqreturn_t cns3xxx_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &cns3xxx_tmr1_clockevent; + u32 __iomem *stat = cns3xxx_tmr1 + TIMER1_2_INTERRUPT_STATUS_OFFSET; + u32 val; + + /* Clear the interrupt */ + val = readl(stat); + writel(val & ~(1 << 2), stat); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction cns3xxx_timer_irq = { + .name = "timer", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = cns3xxx_timer_interrupt, +}; + +/* + * Set up the clock source and clock events devices + */ +static void __init __cns3xxx_timer_init(unsigned int timer_irq) +{ + u32 val; + u32 irq_mask; + + /* + * Initialise to a known state (all timers off) + */ + + /* disable timer1 and timer2 */ + writel(0, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); + /* stop free running timer3 */ + writel(0, cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET); + + /* timer1 */ + writel(0x5C800, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET); + writel(0x5C800, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET); + + writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V1_OFFSET); + writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V2_OFFSET); + + /* mask irq, non-mask timer1 overflow */ + irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET); + irq_mask &= ~(1 << 2); + irq_mask |= 0x03; + writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET); + + /* down counter */ + val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); + val |= (1 << 9); + writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); + + /* timer2 */ + writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V1_OFFSET); + writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V2_OFFSET); + + /* mask irq */ + irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET); + irq_mask |= ((1 << 3) | (1 << 4) | (1 << 5)); + writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET); + + /* down counter */ + val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); + val |= (1 << 10); + writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); + + /* Make irqs happen for the system timer */ + setup_irq(timer_irq, &cns3xxx_timer_irq); + + cns3xxx_clockevents_init(timer_irq); +} + +static void __init cns3xxx_timer_init(void) +{ + cns3xxx_tmr1 = __io(CNS3XXX_TIMER1_2_3_BASE_VIRT); + + __cns3xxx_timer_init(IRQ_CNS3XXX_TIMER0); +} + +struct sys_timer cns3xxx_timer = { + .init = cns3xxx_timer_init, +}; diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h new file mode 100644 index 00000000000..6b33ec11346 --- /dev/null +++ b/arch/arm/mach-cns3xxx/core.h @@ -0,0 +1,23 @@ +/* + * Copyright 2000 Deep Blue Solutions Ltd + * Copyright 2004 ARM Limited + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#ifndef __CNS3XXX_CORE_H +#define __CNS3XXX_CORE_H + +extern void __iomem *gic_cpu_base_addr; +extern struct sys_timer cns3xxx_timer; + +void __init cns3xxx_map_io(void); +void __init cns3xxx_init_irq(void); +void cns3xxx_power_off(void); +void cns3xxx_pwr_power_up(unsigned int block); +void cns3xxx_pwr_power_down(unsigned int block); + +#endif /* __CNS3XXX_CORE_H */ diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h new file mode 100644 index 00000000000..8a2f5a21d4e --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h @@ -0,0 +1,635 @@ +/* + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_BOARD_CNS3XXXH +#define __MACH_BOARD_CNS3XXXH + +/* + * Memory map + */ +#define CNS3XXX_FLASH_BASE 0x10000000 /* Flash/SRAM Memory Bank 0 */ +#define CNS3XXX_FLASH_SIZE SZ_256M + +#define CNS3XXX_DDR2SDRAM_BASE 0x20000000 /* DDR2 SDRAM Memory */ + +#define CNS3XXX_SPI_FLASH_BASE 0x60000000 /* SPI Serial Flash Memory */ + +#define CNS3XXX_SWITCH_BASE 0x70000000 /* Switch and HNAT Control */ +#define CNS3XXX_SWITCH_BASE_VIRT 0xFFF00000 + +#define CNS3XXX_PPE_BASE 0x70001000 /* HANT */ +#define CNS3XXX_PPE_BASE_VIRT 0xFFF50000 + +#define CNS3XXX_EMBEDDED_SRAM_BASE 0x70002000 /* HANT Embedded SRAM */ +#define CNS3XXX_EMBEDDED_SRAM_BASE_VIRT 0xFFF60000 + +#define CNS3XXX_SSP_BASE 0x71000000 /* Synchronous Serial Port - SPI/PCM/I2C */ +#define CNS3XXX_SSP_BASE_VIRT 0xFFF01000 + +#define CNS3XXX_DMC_BASE 0x72000000 /* DMC Control (DDR2 SDRAM) */ +#define CNS3XXX_DMC_BASE_VIRT 0xFFF02000 + +#define CNS3XXX_SMC_BASE 0x73000000 /* SMC Control */ +#define CNS3XXX_SMC_BASE_VIRT 0xFFF03000 + +#define SMC_MEMC_STATUS_OFFSET 0x000 +#define SMC_MEMIF_CFG_OFFSET 0x004 +#define SMC_MEMC_CFG_SET_OFFSET 0x008 +#define SMC_MEMC_CFG_CLR_OFFSET 0x00C +#define SMC_DIRECT_CMD_OFFSET 0x010 +#define SMC_SET_CYCLES_OFFSET 0x014 +#define SMC_SET_OPMODE_OFFSET 0x018 +#define SMC_REFRESH_PERIOD_0_OFFSET 0x020 +#define SMC_REFRESH_PERIOD_1_OFFSET 0x024 +#define SMC_SRAM_CYCLES0_0_OFFSET 0x100 +#define SMC_NAND_CYCLES0_0_OFFSET 0x100 +#define SMC_OPMODE0_0_OFFSET 0x104 +#define SMC_SRAM_CYCLES0_1_OFFSET 0x120 +#define SMC_NAND_CYCLES0_1_OFFSET 0x120 +#define SMC_OPMODE0_1_OFFSET 0x124 +#define SMC_USER_STATUS_OFFSET 0x200 +#define SMC_USER_CONFIG_OFFSET 0x204 +#define SMC_ECC_STATUS_OFFSET 0x300 +#define SMC_ECC_MEMCFG_OFFSET 0x304 +#define SMC_ECC_MEMCOMMAND1_OFFSET 0x308 +#define SMC_ECC_MEMCOMMAND2_OFFSET 0x30C +#define SMC_ECC_ADDR0_OFFSET 0x310 +#define SMC_ECC_ADDR1_OFFSET 0x314 +#define SMC_ECC_VALUE0_OFFSET 0x318 +#define SMC_ECC_VALUE1_OFFSET 0x31C +#define SMC_ECC_VALUE2_OFFSET 0x320 +#define SMC_ECC_VALUE3_OFFSET 0x324 +#define SMC_PERIPH_ID_0_OFFSET 0xFE0 +#define SMC_PERIPH_ID_1_OFFSET 0xFE4 +#define SMC_PERIPH_ID_2_OFFSET 0xFE8 +#define SMC_PERIPH_ID_3_OFFSET 0xFEC +#define SMC_PCELL_ID_0_OFFSET 0xFF0 +#define SMC_PCELL_ID_1_OFFSET 0xFF4 +#define SMC_PCELL_ID_2_OFFSET 0xFF8 +#define SMC_PCELL_ID_3_OFFSET 0xFFC + +#define CNS3XXX_GPIOA_BASE 0x74000000 /* GPIO port A */ +#define CNS3XXX_GPIOA_BASE_VIRT 0xFFF04000 + +#define CNS3XXX_GPIOB_BASE 0x74800000 /* GPIO port B */ +#define CNS3XXX_GPIOB_BASE_VIRT 0xFFF05000 + +#define CNS3XXX_RTC_BASE 0x75000000 /* Real Time Clock */ +#define CNS3XXX_RTC_BASE_VIRT 0xFFF06000 + +#define RTC_SEC_OFFSET 0x00 +#define RTC_MIN_OFFSET 0x04 +#define RTC_HOUR_OFFSET 0x08 +#define RTC_DAY_OFFSET 0x0C +#define RTC_SEC_ALM_OFFSET 0x10 +#define RTC_MIN_ALM_OFFSET 0x14 +#define RTC_HOUR_ALM_OFFSET 0x18 +#define RTC_REC_OFFSET 0x1C +#define RTC_CTRL_OFFSET 0x20 +#define RTC_INTR_STS_OFFSET 0x34 + +#define CNS3XXX_MISC_BASE 0x76000000 /* Misc Control */ +#define CNS3XXX_MISC_BASE_VIRT 0xFFF07000 /* Misc Control */ + +#define CNS3XXX_PM_BASE 0x77000000 /* Power Management Control */ +#define CNS3XXX_PM_BASE_VIRT 0xFFF08000 + +#define PM_CLK_GATE_OFFSET 0x00 +#define PM_SOFT_RST_OFFSET 0x04 +#define PM_HS_CFG_OFFSET 0x08 +#define PM_CACTIVE_STA_OFFSET 0x0C +#define PM_PWR_STA_OFFSET 0x10 +#define PM_SYS_CLK_CTRL_OFFSET 0x14 +#define PM_PLL_LCD_I2S_CTRL_OFFSET 0x18 +#define PM_PLL_HM_PD_OFFSET 0x1C + +#define CNS3XXX_UART0_BASE 0x78000000 /* UART 0 */ +#define CNS3XXX_UART0_BASE_VIRT 0xFFF09000 + +#define CNS3XXX_UART1_BASE 0x78400000 /* UART 1 */ +#define CNS3XXX_UART1_BASE_VIRT 0xFFF0A000 + +#define CNS3XXX_UART2_BASE 0x78800000 /* UART 2 */ +#define CNS3XXX_UART2_BASE_VIRT 0xFFF0B000 + +#define CNS3XXX_DMAC_BASE 0x79000000 /* Generic DMA Control */ +#define CNS3XXX_DMAC_BASE_VIRT 0xFFF0D000 + +#define CNS3XXX_CORESIGHT_BASE 0x7A000000 /* CoreSight */ +#define CNS3XXX_CORESIGHT_BASE_VIRT 0xFFF0E000 + +#define CNS3XXX_CRYPTO_BASE 0x7B000000 /* Crypto */ +#define CNS3XXX_CRYPTO_BASE_VIRT 0xFFF0F000 + +#define CNS3XXX_I2S_BASE 0x7C000000 /* I2S */ +#define CNS3XXX_I2S_BASE_VIRT 0xFFF10000 + +#define CNS3XXX_TIMER1_2_3_BASE 0x7C800000 /* Timer */ +#define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFFF10800 + +#define TIMER1_COUNTER_OFFSET 0x00 +#define TIMER1_AUTO_RELOAD_OFFSET 0x04 +#define TIMER1_MATCH_V1_OFFSET 0x08 +#define TIMER1_MATCH_V2_OFFSET 0x0C + +#define TIMER2_COUNTER_OFFSET 0x10 +#define TIMER2_AUTO_RELOAD_OFFSET 0x14 +#define TIMER2_MATCH_V1_OFFSET 0x18 +#define TIMER2_MATCH_V2_OFFSET 0x1C + +#define TIMER1_2_CONTROL_OFFSET 0x30 +#define TIMER1_2_INTERRUPT_STATUS_OFFSET 0x34 +#define TIMER1_2_INTERRUPT_MASK_OFFSET 0x38 + +#define TIMER_FREERUN_OFFSET 0x40 +#define TIMER_FREERUN_CONTROL_OFFSET 0x44 + +#define CNS3XXX_HCIE_BASE 0x7D000000 /* HCIE Control */ +#define CNS3XXX_HCIE_BASE_VIRT 0xFFF30000 + +#define CNS3XXX_RAID_BASE 0x7E000000 /* RAID Control */ +#define CNS3XXX_RAID_BASE_VIRT 0xFFF12000 + +#define CNS3XXX_AXI_IXC_BASE 0x7F000000 /* AXI IXC */ +#define CNS3XXX_AXI_IXC_BASE_VIRT 0xFFF13000 + +#define CNS3XXX_CLCD_BASE 0x80000000 /* LCD Control */ +#define CNS3XXX_CLCD_BASE_VIRT 0xFFF14000 + +#define CNS3XXX_USBOTG_BASE 0x81000000 /* USB OTG Control */ +#define CNS3XXX_USBOTG_BASE_VIRT 0xFFF15000 + +#define CNS3XXX_USB_BASE 0x82000000 /* USB Host Control */ +#define CNS3XXX_USB_BASE_VIRT 0xFFF16000 + +#define CNS3XXX_SATA2_BASE 0x83000000 /* SATA */ +#define CNS3XXX_SATA2_SIZE SZ_16M +#define CNS3XXX_SATA2_BASE_VIRT 0xFFF17000 + +#define CNS3XXX_CAMERA_BASE 0x84000000 /* Camera Interface */ +#define CNS3XXX_CAMERA_BASE_VIRT 0xFFF18000 + +#define CNS3XXX_SDIO_BASE 0x85000000 /* SDIO */ +#define CNS3XXX_SDIO_BASE_VIRT 0xFFF19000 + +#define CNS3XXX_I2S_TDM_BASE 0x86000000 /* I2S TDM */ +#define CNS3XXX_I2S_TDM_BASE_VIRT 0xFFF1A000 + +#define CNS3XXX_2DG_BASE 0x87000000 /* 2D Graphic Control */ +#define CNS3XXX_2DG_BASE_VIRT 0xFFF1B000 + +#define CNS3XXX_USB_OHCI_BASE 0x88000000 /* USB OHCI */ +#define CNS3XXX_USB_OHCI_BASE_VIRT 0xFFF1C000 + +#define CNS3XXX_L2C_BASE 0x92000000 /* L2 Cache Control */ +#define CNS3XXX_L2C_BASE_VIRT 0xFFF27000 + +#define CNS3XXX_PCIE0_MEM_BASE 0xA0000000 /* PCIe Port 0 IO/Memory Space */ +#define CNS3XXX_PCIE0_MEM_BASE_VIRT 0xE0000000 + +#define CNS3XXX_PCIE0_HOST_BASE 0xAB000000 /* PCIe Port 0 RC Base */ +#define CNS3XXX_PCIE0_HOST_BASE_VIRT 0xE1000000 + +#define CNS3XXX_PCIE0_IO_BASE 0xAC000000 /* PCIe Port 0 */ +#define CNS3XXX_PCIE0_IO_BASE_VIRT 0xE2000000 + +#define CNS3XXX_PCIE0_CFG0_BASE 0xAD000000 /* PCIe Port 0 CFG Type 0 */ +#define CNS3XXX_PCIE0_CFG0_BASE_VIRT 0xE3000000 + +#define CNS3XXX_PCIE0_CFG1_BASE 0xAE000000 /* PCIe Port 0 CFG Type 1 */ +#define CNS3XXX_PCIE0_CFG1_BASE_VIRT 0xE4000000 + +#define CNS3XXX_PCIE0_MSG_BASE 0xAF000000 /* PCIe Port 0 Message Space */ +#define CNS3XXX_PCIE0_MSG_BASE_VIRT 0xE5000000 + +#define CNS3XXX_PCIE1_MEM_BASE 0xB0000000 /* PCIe Port 1 IO/Memory Space */ +#define CNS3XXX_PCIE1_MEM_BASE_VIRT 0xE8000000 + +#define CNS3XXX_PCIE1_HOST_BASE 0xBB000000 /* PCIe Port 1 RC Base */ +#define CNS3XXX_PCIE1_HOST_BASE_VIRT 0xE9000000 + +#define CNS3XXX_PCIE1_IO_BASE 0xBC000000 /* PCIe Port 1 */ +#define CNS3XXX_PCIE1_IO_BASE_VIRT 0xEA000000 + +#define CNS3XXX_PCIE1_CFG0_BASE 0xBD000000 /* PCIe Port 1 CFG Type 0 */ +#define CNS3XXX_PCIE1_CFG0_BASE_VIRT 0xEB000000 + +#define CNS3XXX_PCIE1_CFG1_BASE 0xBE000000 /* PCIe Port 1 CFG Type 1 */ +#define CNS3XXX_PCIE1_CFG1_BASE_VIRT 0xEC000000 + +#define CNS3XXX_PCIE1_MSG_BASE 0xBF000000 /* PCIe Port 1 Message Space */ +#define CNS3XXX_PCIE1_MSG_BASE_VIRT 0xED000000 + +/* + * Testchip peripheral and fpga gic regions + */ +#define CNS3XXX_TC11MP_SCU_BASE 0x90000000 /* IRQ, Test chip */ +#define CNS3XXX_TC11MP_SCU_BASE_VIRT 0xFF000000 + +#define CNS3XXX_TC11MP_GIC_CPU_BASE 0x90000100 /* Test chip interrupt controller CPU interface */ +#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT 0xFF000100 + +#define CNS3XXX_TC11MP_TWD_BASE 0x90000600 +#define CNS3XXX_TC11MP_TWD_BASE_VIRT 0xFF000600 + +#define CNS3XXX_TC11MP_GIC_DIST_BASE 0x90001000 /* Test chip interrupt controller distributor */ +#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT 0xFF001000 + +#define CNS3XXX_TC11MP_L220_BASE 0x92002000 /* L220 registers */ +#define CNS3XXX_TC11MP_L220_BASE_VIRT 0xFF002000 + +/* + * Misc block + */ +#define MISC_MEM_MAP(offs) (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + (offs)) +#define MISC_MEM_MAP_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_MISC_BASE_VIRT + (offset)))) + +#define MISC_MEMORY_REMAP_REG MISC_MEM_MAP_VALUE(0x00) +#define MISC_CHIP_CONFIG_REG MISC_MEM_MAP_VALUE(0x04) +#define MISC_DEBUG_PROBE_DATA_REG MISC_MEM_MAP_VALUE(0x08) +#define MISC_DEBUG_PROBE_SELECTION_REG MISC_MEM_MAP_VALUE(0x0C) +#define MISC_IO_PIN_FUNC_SELECTION_REG MISC_MEM_MAP_VALUE(0x10) +#define MISC_GPIOA_PIN_ENABLE_REG MISC_MEM_MAP_VALUE(0x14) +#define MISC_GPIOB_PIN_ENABLE_REG MISC_MEM_MAP_VALUE(0x18) +#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_A MISC_MEM_MAP_VALUE(0x1C) +#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_B MISC_MEM_MAP_VALUE(0x20) +#define MISC_GPIOA_15_0_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x24) +#define MISC_GPIOA_16_31_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x28) +#define MISC_GPIOB_15_0_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x2C) +#define MISC_GPIOB_16_31_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x30) +#define MISC_IO_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x34) +#define MISC_E_FUSE_31_0_REG MISC_MEM_MAP_VALUE(0x40) +#define MISC_E_FUSE_63_32_REG MISC_MEM_MAP_VALUE(0x44) +#define MISC_E_FUSE_95_64_REG MISC_MEM_MAP_VALUE(0x48) +#define MISC_E_FUSE_127_96_REG MISC_MEM_MAP_VALUE(0x4C) +#define MISC_SOFTWARE_TEST_1_REG MISC_MEM_MAP_VALUE(0x50) +#define MISC_SOFTWARE_TEST_2_REG MISC_MEM_MAP_VALUE(0x54) + +#define MISC_SATA_POWER_MODE MISC_MEM_MAP_VALUE(0x310) + +#define MISC_USB_CFG_REG MISC_MEM_MAP_VALUE(0x800) +#define MISC_USB_STS_REG MISC_MEM_MAP_VALUE(0x804) +#define MISC_USBPHY00_CFG_REG MISC_MEM_MAP_VALUE(0x808) +#define MISC_USBPHY01_CFG_REG MISC_MEM_MAP_VALUE(0x80c) +#define MISC_USBPHY10_CFG_REG MISC_MEM_MAP_VALUE(0x810) +#define MISC_USBPHY11_CFG_REG MISC_MEM_MAP_VALUE(0x814) + +#define MISC_PCIEPHY_CMCTL(x) MISC_MEM_MAP(0x900 + (x) * 0x004) +#define MISC_PCIEPHY_CTL(x) MISC_MEM_MAP(0x940 + (x) * 0x100) +#define MISC_PCIE_AXIS_AWMISC(x) MISC_MEM_MAP(0x944 + (x) * 0x100) +#define MISC_PCIE_AXIS_ARMISC(x) MISC_MEM_MAP(0x948 + (x) * 0x100) +#define MISC_PCIE_AXIS_RMISC(x) MISC_MEM_MAP(0x94C + (x) * 0x100) +#define MISC_PCIE_AXIS_BMISC(x) MISC_MEM_MAP(0x950 + (x) * 0x100) +#define MISC_PCIE_AXIM_RMISC(x) MISC_MEM_MAP(0x954 + (x) * 0x100) +#define MISC_PCIE_AXIM_BMISC(x) MISC_MEM_MAP(0x958 + (x) * 0x100) +#define MISC_PCIE_CTRL(x) MISC_MEM_MAP(0x95C + (x) * 0x100) +#define MISC_PCIE_PM_DEBUG(x) MISC_MEM_MAP(0x960 + (x) * 0x100) +#define MISC_PCIE_RFC_DEBUG(x) MISC_MEM_MAP(0x964 + (x) * 0x100) +#define MISC_PCIE_CXPL_DEBUGL(x) MISC_MEM_MAP(0x968 + (x) * 0x100) +#define MISC_PCIE_CXPL_DEBUGH(x) MISC_MEM_MAP(0x96C + (x) * 0x100) +#define MISC_PCIE_DIAG_DEBUGH(x) MISC_MEM_MAP(0x970 + (x) * 0x100) +#define MISC_PCIE_W1CLR(x) MISC_MEM_MAP(0x974 + (x) * 0x100) +#define MISC_PCIE_INT_MASK(x) MISC_MEM_MAP(0x978 + (x) * 0x100) +#define MISC_PCIE_INT_STATUS(x) MISC_MEM_MAP(0x97C + (x) * 0x100) + +/* + * Power management and clock control + */ +#define PMU_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_PM_BASE_VIRT + (offset)))) + +#define PM_CLK_GATE_REG PMU_REG_VALUE(0x000) +#define PM_SOFT_RST_REG PMU_REG_VALUE(0x004) +#define PM_HS_CFG_REG PMU_REG_VALUE(0x008) +#define PM_CACTIVE_STA_REG PMU_REG_VALUE(0x00C) +#define PM_PWR_STA_REG PMU_REG_VALUE(0x010) +#define PM_CLK_CTRL_REG PMU_REG_VALUE(0x014) +#define PM_PLL_LCD_I2S_CTRL_REG PMU_REG_VALUE(0x018) +#define PM_PLL_HM_PD_CTRL_REG PMU_REG_VALUE(0x01C) +#define PM_REGULAT_CTRL_REG PMU_REG_VALUE(0x020) +#define PM_WDT_CTRL_REG PMU_REG_VALUE(0x024) +#define PM_WU_CTRL0_REG PMU_REG_VALUE(0x028) +#define PM_WU_CTRL1_REG PMU_REG_VALUE(0x02C) +#define PM_CSR_REG PMU_REG_VALUE(0x030) + +/* PM_CLK_GATE_REG */ +#define PM_CLK_GATE_REG_OFFSET_SDIO (25) +#define PM_CLK_GATE_REG_OFFSET_GPU (24) +#define PM_CLK_GATE_REG_OFFSET_CIM (23) +#define PM_CLK_GATE_REG_OFFSET_LCDC (22) +#define PM_CLK_GATE_REG_OFFSET_I2S (21) +#define PM_CLK_GATE_REG_OFFSET_RAID (20) +#define PM_CLK_GATE_REG_OFFSET_SATA (19) +#define PM_CLK_GATE_REG_OFFSET_PCIE(x) (17 + (x)) +#define PM_CLK_GATE_REG_OFFSET_USB_HOST (16) +#define PM_CLK_GATE_REG_OFFSET_USB_OTG (15) +#define PM_CLK_GATE_REG_OFFSET_TIMER (14) +#define PM_CLK_GATE_REG_OFFSET_CRYPTO (13) +#define PM_CLK_GATE_REG_OFFSET_HCIE (12) +#define PM_CLK_GATE_REG_OFFSET_SWITCH (11) +#define PM_CLK_GATE_REG_OFFSET_GPIO (10) +#define PM_CLK_GATE_REG_OFFSET_UART3 (9) +#define PM_CLK_GATE_REG_OFFSET_UART2 (8) +#define PM_CLK_GATE_REG_OFFSET_UART1 (7) +#define PM_CLK_GATE_REG_OFFSET_RTC (5) +#define PM_CLK_GATE_REG_OFFSET_GDMA (4) +#define PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C (3) +#define PM_CLK_GATE_REG_OFFSET_SMC_NFI (1) +#define PM_CLK_GATE_REG_MASK (0x03FFFFBA) + +/* PM_SOFT_RST_REG */ +#define PM_SOFT_RST_REG_OFFST_WARM_RST_FLAG (31) +#define PM_SOFT_RST_REG_OFFST_CPU1 (29) +#define PM_SOFT_RST_REG_OFFST_CPU0 (28) +#define PM_SOFT_RST_REG_OFFST_SDIO (25) +#define PM_SOFT_RST_REG_OFFST_GPU (24) +#define PM_SOFT_RST_REG_OFFST_CIM (23) +#define PM_SOFT_RST_REG_OFFST_LCDC (22) +#define PM_SOFT_RST_REG_OFFST_I2S (21) +#define PM_SOFT_RST_REG_OFFST_RAID (20) +#define PM_SOFT_RST_REG_OFFST_SATA (19) +#define PM_SOFT_RST_REG_OFFST_PCIE(x) (17 + (x)) +#define PM_SOFT_RST_REG_OFFST_USB_HOST (16) +#define PM_SOFT_RST_REG_OFFST_USB_OTG (15) +#define PM_SOFT_RST_REG_OFFST_TIMER (14) +#define PM_SOFT_RST_REG_OFFST_CRYPTO (13) +#define PM_SOFT_RST_REG_OFFST_HCIE (12) +#define PM_SOFT_RST_REG_OFFST_SWITCH (11) +#define PM_SOFT_RST_REG_OFFST_GPIO (10) +#define PM_SOFT_RST_REG_OFFST_UART3 (9) +#define PM_SOFT_RST_REG_OFFST_UART2 (8) +#define PM_SOFT_RST_REG_OFFST_UART1 (7) +#define PM_SOFT_RST_REG_OFFST_RTC (5) +#define PM_SOFT_RST_REG_OFFST_GDMA (4) +#define PM_SOFT_RST_REG_OFFST_SPI_PCM_I2C (3) +#define PM_SOFT_RST_REG_OFFST_DMC (2) +#define PM_SOFT_RST_REG_OFFST_SMC_NFI (1) +#define PM_SOFT_RST_REG_OFFST_GLOBAL (0) +#define PM_SOFT_RST_REG_MASK (0xF3FFFFBF) + +/* PMHS_CFG_REG */ +#define PM_HS_CFG_REG_OFFSET_SDIO (25) +#define PM_HS_CFG_REG_OFFSET_GPU (24) +#define PM_HS_CFG_REG_OFFSET_CIM (23) +#define PM_HS_CFG_REG_OFFSET_LCDC (22) +#define PM_HS_CFG_REG_OFFSET_I2S (21) +#define PM_HS_CFG_REG_OFFSET_RAID (20) +#define PM_HS_CFG_REG_OFFSET_SATA (19) +#define PM_HS_CFG_REG_OFFSET_PCIE1 (18) +#define PM_HS_CFG_REG_OFFSET_PCIE0 (17) +#define PM_HS_CFG_REG_OFFSET_USB_HOST (16) +#define PM_HS_CFG_REG_OFFSET_USB_OTG (15) +#define PM_HS_CFG_REG_OFFSET_TIMER (14) +#define PM_HS_CFG_REG_OFFSET_CRYPTO (13) +#define PM_HS_CFG_REG_OFFSET_HCIE (12) +#define PM_HS_CFG_REG_OFFSET_SWITCH (11) +#define PM_HS_CFG_REG_OFFSET_GPIO (10) +#define PM_HS_CFG_REG_OFFSET_UART3 (9) +#define PM_HS_CFG_REG_OFFSET_UART2 (8) +#define PM_HS_CFG_REG_OFFSET_UART1 (7) +#define PM_HS_CFG_REG_OFFSET_RTC (5) +#define PM_HS_CFG_REG_OFFSET_GDMA (4) +#define PM_HS_CFG_REG_OFFSET_SPI_PCM_I2S (3) +#define PM_HS_CFG_REG_OFFSET_DMC (2) +#define PM_HS_CFG_REG_OFFSET_SMC_NFI (1) +#define PM_HS_CFG_REG_MASK (0x03FFFFBE) +#define PM_HS_CFG_REG_MASK_SUPPORT (0x01100806) + +/* PM_CACTIVE_STA_REG */ +#define PM_CACTIVE_STA_REG_OFFSET_SDIO (25) +#define PM_CACTIVE_STA_REG_OFFSET_GPU (24) +#define PM_CACTIVE_STA_REG_OFFSET_CIM (23) +#define PM_CACTIVE_STA_REG_OFFSET_LCDC (22) +#define PM_CACTIVE_STA_REG_OFFSET_I2S (21) +#define PM_CACTIVE_STA_REG_OFFSET_RAID (20) +#define PM_CACTIVE_STA_REG_OFFSET_SATA (19) +#define PM_CACTIVE_STA_REG_OFFSET_PCIE1 (18) +#define PM_CACTIVE_STA_REG_OFFSET_PCIE0 (17) +#define PM_CACTIVE_STA_REG_OFFSET_USB_HOST (16) +#define PM_CACTIVE_STA_REG_OFFSET_USB_OTG (15) +#define PM_CACTIVE_STA_REG_OFFSET_TIMER (14) +#define PM_CACTIVE_STA_REG_OFFSET_CRYPTO (13) +#define PM_CACTIVE_STA_REG_OFFSET_HCIE (12) +#define PM_CACTIVE_STA_REG_OFFSET_SWITCH (11) +#define PM_CACTIVE_STA_REG_OFFSET_GPIO (10) +#define PM_CACTIVE_STA_REG_OFFSET_UART3 (9) +#define PM_CACTIVE_STA_REG_OFFSET_UART2 (8) +#define PM_CACTIVE_STA_REG_OFFSET_UART1 (7) +#define PM_CACTIVE_STA_REG_OFFSET_RTC (5) +#define PM_CACTIVE_STA_REG_OFFSET_GDMA (4) +#define PM_CACTIVE_STA_REG_OFFSET_SPI_PCM_I2S (3) +#define PM_CACTIVE_STA_REG_OFFSET_DMC (2) +#define PM_CACTIVE_STA_REG_OFFSET_SMC_NFI (1) +#define PM_CACTIVE_STA_REG_MASK (0x03FFFFBE) + +/* PM_PWR_STA_REG */ +#define PM_PWR_STA_REG_REG_OFFSET_SDIO (25) +#define PM_PWR_STA_REG_REG_OFFSET_GPU (24) +#define PM_PWR_STA_REG_REG_OFFSET_CIM (23) +#define PM_PWR_STA_REG_REG_OFFSET_LCDC (22) +#define PM_PWR_STA_REG_REG_OFFSET_I2S (21) +#define PM_PWR_STA_REG_REG_OFFSET_RAID (20) +#define PM_PWR_STA_REG_REG_OFFSET_SATA (19) +#define PM_PWR_STA_REG_REG_OFFSET_PCIE1 (18) +#define PM_PWR_STA_REG_REG_OFFSET_PCIE0 (17) +#define PM_PWR_STA_REG_REG_OFFSET_USB_HOST (16) +#define PM_PWR_STA_REG_REG_OFFSET_USB_OTG (15) +#define PM_PWR_STA_REG_REG_OFFSET_TIMER (14) +#define PM_PWR_STA_REG_REG_OFFSET_CRYPTO (13) +#define PM_PWR_STA_REG_REG_OFFSET_HCIE (12) +#define PM_PWR_STA_REG_REG_OFFSET_SWITCH (11) +#define PM_PWR_STA_REG_REG_OFFSET_GPIO (10) +#define PM_PWR_STA_REG_REG_OFFSET_UART3 (9) +#define PM_PWR_STA_REG_REG_OFFSET_UART2 (8) +#define PM_PWR_STA_REG_REG_OFFSET_UART1 (7) +#define PM_PWR_STA_REG_REG_OFFSET_RTC (5) +#define PM_PWR_STA_REG_REG_OFFSET_GDMA (4) +#define PM_PWR_STA_REG_REG_OFFSET_SPI_PCM_I2S (3) +#define PM_PWR_STA_REG_REG_OFFSET_DMC (2) +#define PM_PWR_STA_REG_REG_OFFSET_SMC_NFI (1) +#define PM_PWR_STA_REG_REG_MASK (0x03FFFFBE) + +/* PM_CLK_CTRL_REG */ +#define PM_CLK_CTRL_REG_OFFSET_I2S_MCLK (31) +#define PM_CLK_CTRL_REG_OFFSET_DDR2_CHG_EN (30) +#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF1_EN (29) +#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF0_EN (28) +#define PM_CLK_CTRL_REG_OFFSET_TIMER_SIM_MODE (27) +#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_DIV (24) +#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_SEL (22) +#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_DIV (20) +#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_SEL (16) +#define PM_CLK_CTRL_REG_OFFSET_MDC_DIV (14) +#define PM_CLK_CTRL_REG_OFFSET_CRYPTO_CLK_SEL (12) +#define PM_CLK_CTRL_REG_OFFSET_CPU_PWR_MODE (9) +#define PM_CLK_CTRL_REG_OFFSET_PLL_DDR2_SEL (7) +#define PM_CLK_CTRL_REG_OFFSET_DIV_IMMEDIATE (6) +#define PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV (4) +#define PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL (0) + +#define PM_CPU_CLK_DIV(DIV) { \ + PM_CLK_CTRL_REG &= ~((0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \ + PM_CLK_CTRL_REG |= (((DIV)&0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \ +} + +#define PM_PLL_CPU_SEL(CPU) { \ + PM_CLK_CTRL_REG &= ~((0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \ + PM_CLK_CTRL_REG |= (((CPU)&0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \ +} + +/* PM_PLL_LCD_I2S_CTRL_REG */ +#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_MCLK_SMC_DIV (22) +#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_R_SEL (17) +#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_P (11) +#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_M (3) +#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_S (0) + +/* PM_PLL_HM_PD_CTRL_REG */ +#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1 (11) +#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0 (10) +#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2SCD (6) +#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2S (5) +#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_LCD (4) +#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB (3) +#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_RGMII (2) +#define PM_PLL_HM_PD_CTRL_REG_MASK (0x00000C7C) + +/* PM_WDT_CTRL_REG */ +#define PM_WDT_CTRL_REG_OFFSET_RESET_CPU_ONLY (0) + +/* PM_CSR_REG - Clock Scaling Register*/ +#define PM_CSR_REG_OFFSET_CSR_EN (30) +#define PM_CSR_REG_OFFSET_CSR_NUM (0) + +#define CNS3XXX_PWR_CLK_EN(BLOCK) (0x1<<PM_CLK_GATE_REG_OFFSET_##BLOCK) + +/* Software reset*/ +#define CNS3XXX_PWR_SOFTWARE_RST(BLOCK) (0x1<<PM_SOFT_RST_REG_OFFST_##BLOCK) + +/* + * CNS3XXX support several power saving mode as following, + * DFS, IDLE, HALT, DOZE, SLEEP, Hibernate + */ +#define CNS3XXX_PWR_CPU_MODE_DFS (0) +#define CNS3XXX_PWR_CPU_MODE_IDLE (1) +#define CNS3XXX_PWR_CPU_MODE_HALT (2) +#define CNS3XXX_PWR_CPU_MODE_DOZE (3) +#define CNS3XXX_PWR_CPU_MODE_SLEEP (4) +#define CNS3XXX_PWR_CPU_MODE_HIBERNATE (5) + +#define CNS3XXX_PWR_PLL(BLOCK) (0x1<<PM_PLL_HM_PD_CTRL_REG_OFFSET_##BLOCK) +#define CNS3XXX_PWR_PLL_ALL PM_PLL_HM_PD_CTRL_REG_MASK + +/* Change CPU frequency and divider */ +#define CNS3XXX_PWR_PLL_CPU_300MHZ (0) +#define CNS3XXX_PWR_PLL_CPU_333MHZ (1) +#define CNS3XXX_PWR_PLL_CPU_366MHZ (2) +#define CNS3XXX_PWR_PLL_CPU_400MHZ (3) +#define CNS3XXX_PWR_PLL_CPU_433MHZ (4) +#define CNS3XXX_PWR_PLL_CPU_466MHZ (5) +#define CNS3XXX_PWR_PLL_CPU_500MHZ (6) +#define CNS3XXX_PWR_PLL_CPU_533MHZ (7) +#define CNS3XXX_PWR_PLL_CPU_566MHZ (8) +#define CNS3XXX_PWR_PLL_CPU_600MHZ (9) +#define CNS3XXX_PWR_PLL_CPU_633MHZ (10) +#define CNS3XXX_PWR_PLL_CPU_666MHZ (11) +#define CNS3XXX_PWR_PLL_CPU_700MHZ (12) + +#define CNS3XXX_PWR_CPU_CLK_DIV_BY1 (0) +#define CNS3XXX_PWR_CPU_CLK_DIV_BY2 (1) +#define CNS3XXX_PWR_CPU_CLK_DIV_BY4 (2) + +/* Change DDR2 frequency */ +#define CNS3XXX_PWR_PLL_DDR2_200MHZ (0) +#define CNS3XXX_PWR_PLL_DDR2_266MHZ (1) +#define CNS3XXX_PWR_PLL_DDR2_333MHZ (2) +#define CNS3XXX_PWR_PLL_DDR2_400MHZ (3) + +void cns3xxx_pwr_soft_rst(unsigned int block); +void cns3xxx_pwr_clk_en(unsigned int block); +int cns3xxx_cpu_clock(void); + +/* + * ARM11 MPCore interrupt sources (primary GIC) + */ +#define IRQ_CNS3XXX_PMU (IRQ_TC11MP_GIC_START + 0) +#define IRQ_CNS3XXX_SDIO (IRQ_TC11MP_GIC_START + 1) +#define IRQ_CNS3XXX_L2CC (IRQ_TC11MP_GIC_START + 2) +#define IRQ_CNS3XXX_RTC (IRQ_TC11MP_GIC_START + 3) +#define IRQ_CNS3XXX_I2S (IRQ_TC11MP_GIC_START + 4) +#define IRQ_CNS3XXX_PCM (IRQ_TC11MP_GIC_START + 5) +#define IRQ_CNS3XXX_SPI (IRQ_TC11MP_GIC_START + 6) +#define IRQ_CNS3XXX_I2C (IRQ_TC11MP_GIC_START + 7) +#define IRQ_CNS3XXX_CIM (IRQ_TC11MP_GIC_START + 8) +#define IRQ_CNS3XXX_GPU (IRQ_TC11MP_GIC_START + 9) +#define IRQ_CNS3XXX_LCD (IRQ_TC11MP_GIC_START + 10) +#define IRQ_CNS3XXX_GPIOA (IRQ_TC11MP_GIC_START + 11) +#define IRQ_CNS3XXX_GPIOB (IRQ_TC11MP_GIC_START + 12) +#define IRQ_CNS3XXX_UART0 (IRQ_TC11MP_GIC_START + 13) +#define IRQ_CNS3XXX_UART1 (IRQ_TC11MP_GIC_START + 14) +#define IRQ_CNS3XXX_UART2 (IRQ_TC11MP_GIC_START + 15) +#define IRQ_CNS3XXX_ARM11 (IRQ_TC11MP_GIC_START + 16) + +#define IRQ_CNS3XXX_SW_STATUS (IRQ_TC11MP_GIC_START + 17) +#define IRQ_CNS3XXX_SW_R0TXC (IRQ_TC11MP_GIC_START + 18) +#define IRQ_CNS3XXX_SW_R0RXC (IRQ_TC11MP_GIC_START + 19) +#define IRQ_CNS3XXX_SW_R0QE (IRQ_TC11MP_GIC_START + 20) +#define IRQ_CNS3XXX_SW_R0QF (IRQ_TC11MP_GIC_START + 21) +#define IRQ_CNS3XXX_SW_R1TXC (IRQ_TC11MP_GIC_START + 22) +#define IRQ_CNS3XXX_SW_R1RXC (IRQ_TC11MP_GIC_START + 23) +#define IRQ_CNS3XXX_SW_R1QE (IRQ_TC11MP_GIC_START + 24) +#define IRQ_CNS3XXX_SW_R1QF (IRQ_TC11MP_GIC_START + 25) +#define IRQ_CNS3XXX_SW_PPE (IRQ_TC11MP_GIC_START + 26) + +#define IRQ_CNS3XXX_CRYPTO (IRQ_TC11MP_GIC_START + 27) +#define IRQ_CNS3XXX_HCIE (IRQ_TC11MP_GIC_START + 28) +#define IRQ_CNS3XXX_PCIE0_DEVICE (IRQ_TC11MP_GIC_START + 29) +#define IRQ_CNS3XXX_PCIE1_DEVICE (IRQ_TC11MP_GIC_START + 30) +#define IRQ_CNS3XXX_USB_OTG (IRQ_TC11MP_GIC_START + 31) +#define IRQ_CNS3XXX_USB_EHCI (IRQ_TC11MP_GIC_START + 32) +#define IRQ_CNS3XXX_SATA (IRQ_TC11MP_GIC_START + 33) +#define IRQ_CNS3XXX_RAID (IRQ_TC11MP_GIC_START + 34) +#define IRQ_CNS3XXX_SMC (IRQ_TC11MP_GIC_START + 35) + +#define IRQ_CNS3XXX_DMAC_ABORT (IRQ_TC11MP_GIC_START + 36) +#define IRQ_CNS3XXX_DMAC0 (IRQ_TC11MP_GIC_START + 37) +#define IRQ_CNS3XXX_DMAC1 (IRQ_TC11MP_GIC_START + 38) +#define IRQ_CNS3XXX_DMAC2 (IRQ_TC11MP_GIC_START + 39) +#define IRQ_CNS3XXX_DMAC3 (IRQ_TC11MP_GIC_START + 40) +#define IRQ_CNS3XXX_DMAC4 (IRQ_TC11MP_GIC_START + 41) +#define IRQ_CNS3XXX_DMAC5 (IRQ_TC11MP_GIC_START + 42) +#define IRQ_CNS3XXX_DMAC6 (IRQ_TC11MP_GIC_START + 43) +#define IRQ_CNS3XXX_DMAC7 (IRQ_TC11MP_GIC_START + 44) +#define IRQ_CNS3XXX_DMAC8 (IRQ_TC11MP_GIC_START + 45) +#define IRQ_CNS3XXX_DMAC9 (IRQ_TC11MP_GIC_START + 46) +#define IRQ_CNS3XXX_DMAC10 (IRQ_TC11MP_GIC_START + 47) +#define IRQ_CNS3XXX_DMAC11 (IRQ_TC11MP_GIC_START + 48) +#define IRQ_CNS3XXX_DMAC12 (IRQ_TC11MP_GIC_START + 49) +#define IRQ_CNS3XXX_DMAC13 (IRQ_TC11MP_GIC_START + 50) +#define IRQ_CNS3XXX_DMAC14 (IRQ_TC11MP_GIC_START + 51) +#define IRQ_CNS3XXX_DMAC15 (IRQ_TC11MP_GIC_START + 52) +#define IRQ_CNS3XXX_DMAC16 (IRQ_TC11MP_GIC_START + 53) +#define IRQ_CNS3XXX_DMAC17 (IRQ_TC11MP_GIC_START + 54) + +#define IRQ_CNS3XXX_PCIE0_RC (IRQ_TC11MP_GIC_START + 55) +#define IRQ_CNS3XXX_PCIE1_RC (IRQ_TC11MP_GIC_START + 56) +#define IRQ_CNS3XXX_TIMER0 (IRQ_TC11MP_GIC_START + 57) +#define IRQ_CNS3XXX_TIMER1 (IRQ_TC11MP_GIC_START + 58) +#define IRQ_CNS3XXX_USB_OHCI (IRQ_TC11MP_GIC_START + 59) +#define IRQ_CNS3XXX_TIMER2 (IRQ_TC11MP_GIC_START + 60) +#define IRQ_CNS3XXX_EXTERNAL_PIN0 (IRQ_TC11MP_GIC_START + 61) +#define IRQ_CNS3XXX_EXTERNAL_PIN1 (IRQ_TC11MP_GIC_START + 62) +#define IRQ_CNS3XXX_EXTERNAL_PIN2 (IRQ_TC11MP_GIC_START + 63) + +#define NR_IRQS_CNS3XXX (IRQ_TC11MP_GIC_START + 64) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_CNS3XXX) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_CNS3XXX +#endif + +#endif /* __MACH_BOARD_CNS3XXX_H */ diff --git a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S new file mode 100644 index 00000000000..d16ce7eb00e --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S @@ -0,0 +1,21 @@ +/* + * Debugging macro include header + * + * Copyright 1994-1999 Russell King + * Copyright 2008 Cavium Networks + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0x10000000 + movne \rx, #0xf0000000 @ virtual base + orr \rx, \rx, #0x00009000 + .endm + +#include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S new file mode 100644 index 00000000000..5e1c5545680 --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S @@ -0,0 +1,82 @@ +/* + * Low-level IRQ helper macros for Cavium Networks platforms + * + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#include <mach/hardware.h> +#include <asm/hardware/gic.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =gic_cpu_base_addr + ldr \base, [\base] + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + /* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: + * + * Interrupts 0-15 are IPI + * 16-28 are reserved + * 29-31 are local. We allow 30 to be used for the watchdog. + * 32-1020 are global + * 1021-1022 are reserved + * 1023 is "spurious" (no interrupt) + * + * For now, we ignore all local interrupts so only return an interrupt if it's + * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. + * + * A simple read from the controller will tell us the number of the highest + * priority enabled interrupt. We then just need to check whether it is in the + * valid range for an IRQ (30-1020 inclusive). + */ + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ + + ldr \tmp, =1021 + + bic \irqnr, \irqstat, #0x1c00 + + cmp \irqnr, #29 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr + + .endm + + /* We assume that irqstat (the raw value of the IRQ acknowledge + * register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of interrupt on the + * controller, since this requires the original irqstat value which + * we won't easily be able to recreate later. + */ + + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + strcc \irqstat, [\base, #GIC_CPU_EOI] + cmpcs \irqnr, \irqnr + .endm + + /* As above, this assumes that irqstat and base are preserved.. */ + + .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #29 + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 + .endm diff --git a/arch/arm/mach-cns3xxx/include/mach/hardware.h b/arch/arm/mach-cns3xxx/include/mach/hardware.h new file mode 100644 index 00000000000..57e09836f9d --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/hardware.h @@ -0,0 +1,22 @@ +/* + * This file contains the hardware definitions of the Cavium Networks boards. + * + * Copyright 2003 ARM Limited. + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_HARDWARE_H +#define __MACH_HARDWARE_H + +#include <asm/sizes.h> + +/* macro to get at IO space when running virtually */ +#define PCIBIOS_MIN_IO 0x00000000 +#define PCIBIOS_MIN_MEM 0x00000000 +#define pcibios_assign_all_busses() 1 + +#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/io.h b/arch/arm/mach-cns3xxx/include/mach/io.h new file mode 100644 index 00000000000..33b6fc1ece7 --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/io.h @@ -0,0 +1,17 @@ +/* + * Copyright 2008 Cavium Networks + * Copyright 2003 ARM Limited + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ +#ifndef __MACH_IO_H +#define __MACH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/irqs.h b/arch/arm/mach-cns3xxx/include/mach/irqs.h new file mode 100644 index 00000000000..2ab96f8085c --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/irqs.h @@ -0,0 +1,24 @@ +/* + * Copyright 2000 Deep Blue Solutions Ltd. + * Copyright 2003 ARM Limited + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_IRQS_H +#define __MACH_IRQS_H + +#define IRQ_LOCALTIMER 29 +#define IRQ_LOCALWDOG 30 +#define IRQ_TC11MP_GIC_START 32 + +#include <mach/cns3xxx.h> + +#ifndef NR_IRQS +#error "NR_IRQS not defined by the board-specific files" +#endif + +#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/memory.h b/arch/arm/mach-cns3xxx/include/mach/memory.h new file mode 100644 index 00000000000..3b6b769b7a2 --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/memory.h @@ -0,0 +1,26 @@ +/* + * Copyright 2003 ARM Limited + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_MEMORY_H +#define __MACH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#define PHYS_OFFSET UL(0x00000000) + +#define __phys_to_bus(x) ((x) + PHYS_OFFSET) +#define __bus_to_phys(x) ((x) - PHYS_OFFSET) + +#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v)) +#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b)) +#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p)) +#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b)) + +#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h new file mode 100644 index 00000000000..58bb03ae3cf --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/system.h @@ -0,0 +1,29 @@ +/* + * Copyright 2000 Deep Blue Solutions Ltd + * Copyright 2003 ARM Limited + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_SYSTEM_H +#define __MACH_SYSTEM_H + +#include <linux/io.h> +#include <asm/proc-fns.h> +#include <mach/hardware.h> + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +void arch_reset(char mode, const char *cmd); + +#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/timex.h b/arch/arm/mach-cns3xxx/include/mach/timex.h new file mode 100644 index 00000000000..1fd04217cac --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/timex.h @@ -0,0 +1,12 @@ +/* + * Cavium Networks architecture timex specifications + * + * Copyright 2003 ARM Limited + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-cns3xxx/include/mach/uncompress.h b/arch/arm/mach-cns3xxx/include/mach/uncompress.h new file mode 100644 index 00000000000..de8ead9b91f --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/uncompress.h @@ -0,0 +1,55 @@ +/* + * Copyright 2003 ARM Limited + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#include <asm/mach-types.h> +#include <mach/hardware.h> +#include <mach/cns3xxx.h> + +#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) +#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c)) +#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30)) +#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18)) + +/* + * Return the UART base address + */ +static inline unsigned long get_uart_base(void) +{ + if (machine_is_cns3420vb()) + return CNS3XXX_UART0_BASE; + else + return 0; +} + +/* + * This does not append a newline + */ +static inline void putc(int c) +{ + unsigned long base = get_uart_base(); + + while (AMBA_UART_FR(base) & (1 << 5)) + barrier(); + + AMBA_UART_DR(base) = c; +} + +static inline void flush(void) +{ + unsigned long base = get_uart_base(); + + while (AMBA_UART_FR(base) & (1 << 3)) + barrier(); +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/arch/arm/mach-cns3xxx/include/mach/vmalloc.h b/arch/arm/mach-cns3xxx/include/mach/vmalloc.h new file mode 100644 index 00000000000..4d381ec0527 --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/vmalloc.h @@ -0,0 +1,11 @@ +/* + * Copyright 2000 Russell King. + * Copyright 2003 ARM Limited + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#define VMALLOC_END 0xd8000000 diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c new file mode 100644 index 00000000000..725e1a4fc23 --- /dev/null +++ b/arch/arm/mach-cns3xxx/pm.c @@ -0,0 +1,86 @@ +/* + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <mach/system.h> +#include <mach/cns3xxx.h> + +void cns3xxx_pwr_clk_en(unsigned int block) +{ + PM_CLK_GATE_REG |= (block & PM_CLK_GATE_REG_MASK); +} + +void cns3xxx_pwr_power_up(unsigned int block) +{ + PM_PLL_HM_PD_CTRL_REG &= ~(block & CNS3XXX_PWR_PLL_ALL); + + /* Wait for 300us for the PLL output clock locked. */ + udelay(300); +}; + +void cns3xxx_pwr_power_down(unsigned int block) +{ + /* write '1' to power down */ + PM_PLL_HM_PD_CTRL_REG |= (block & CNS3XXX_PWR_PLL_ALL); +}; + +static void cns3xxx_pwr_soft_rst_force(unsigned int block) +{ + /* + * bit 0, 28, 29 => program low to reset, + * the other else program low and then high + */ + if (block & 0x30000001) { + PM_SOFT_RST_REG &= ~(block & PM_SOFT_RST_REG_MASK); + } else { + PM_SOFT_RST_REG &= ~(block & PM_SOFT_RST_REG_MASK); + PM_SOFT_RST_REG |= (block & PM_SOFT_RST_REG_MASK); + } +} + +void cns3xxx_pwr_soft_rst(unsigned int block) +{ + static unsigned int soft_reset; + + if (soft_reset & block) { + /* SPI/I2C/GPIO use the same block, reset once. */ + return; + } else { + soft_reset |= block; + } + cns3xxx_pwr_soft_rst_force(block); +} + +void arch_reset(char mode, const char *cmd) +{ + /* + * To reset, we hit the on-board reset register + * in the system FPGA. + */ + cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(GLOBAL)); +} + +/* + * cns3xxx_cpu_clock - return CPU/L2 clock + * aclk: cpu clock/2 + * hclk: cpu clock/4 + * pclk: cpu clock/8 + */ +int cns3xxx_cpu_clock(void) +{ + int cpu; + int cpu_sel; + int div_sel; + + cpu_sel = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) & 0xf; + div_sel = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3; + + cpu = (300 + ((cpu_sel / 3) * 100) + ((cpu_sel % 3) * 33)) >> div_sel; + + return cpu; +} diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 17879a876be..29b2163b1fe 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -38,6 +38,12 @@ config MACH_ESATA_SHEEVAPLUG Say 'Y' here if you want your kernel to support the Marvell eSATA SheevaPlug Reference Board. +config MACH_GURUPLUG + bool "Marvell GuruPlug Reference Board" + help + Say 'Y' here if you want your kernel to support the + Marvell GuruPlug Reference Board. + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS" help @@ -81,6 +87,18 @@ config MACH_INETSPACE_V2 Say 'Y' here if you want your kernel to support the LaCie Internet Space v2 NAS. +config MACH_NET2BIG_V2 + bool "LaCie 2Big Network v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie 2Big Network v2 NAS. + +config MACH_NET5BIG_V2 + bool "LaCie 5Big Network v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie 5Big Network v2 NAS. + endmenu endif diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index a5530e36ba3..c0cd5d36200 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -6,10 +6,13 @@ obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o +obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o +obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o +obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c new file mode 100644 index 00000000000..54d07c89d4f --- /dev/null +++ b/arch/arm/mach-kirkwood/guruplug-setup.c @@ -0,0 +1,131 @@ +/* + * arch/arm/mach-kirkwood/guruplug-setup.c + * + * Marvell GuruPlug Reference Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include <plat/mvsdio.h> +#include "common.h" +#include "mpp.h" + +static struct mtd_partition guruplug_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_4M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data guruplug_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv643xx_eth_platform_data guruplug_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(1), +}; + +static struct mv_sata_platform_data guruplug_sata_data = { + .n_ports = 1, +}; + +static struct mvsdio_platform_data guruplug_mvsdio_data = { + /* unfortunately the CD signal has not been connected */ +}; + +static struct gpio_led guruplug_led_pins[] = { + { + .name = "guruplug:red:health", + .gpio = 46, + .active_low = 1, + }, + { + .name = "guruplug:green:health", + .gpio = 47, + .active_low = 1, + }, + { + .name = "guruplug:red:wmode", + .gpio = 48, + .active_low = 1, + }, + { + .name = "guruplug:green:wmode", + .gpio = 49, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data guruplug_led_data = { + .leds = guruplug_led_pins, + .num_leds = ARRAY_SIZE(guruplug_led_pins), +}; + +static struct platform_device guruplug_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &guruplug_led_data, + } +}; + +static unsigned int guruplug_mpp_config[] __initdata = { + MPP46_GPIO, /* M_RLED */ + MPP47_GPIO, /* M_GLED */ + MPP48_GPIO, /* B_RLED */ + MPP49_GPIO, /* B_GLED */ + 0 +}; + +static void __init guruplug_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(guruplug_mpp_config); + + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(guruplug_nand_parts), 25); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&guruplug_ge00_data); + kirkwood_ge01_init(&guruplug_ge01_data); + kirkwood_sata_init(&guruplug_sata_data); + kirkwood_sdio_init(&guruplug_mvsdio_data); + + platform_device_register(&guruplug_leds); +} + +MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board") + /* Maintainer: Siddarth Gore <gores@marvell.com> */ + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = guruplug_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c new file mode 100644 index 00000000000..8a2bb0228e4 --- /dev/null +++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c @@ -0,0 +1,415 @@ +/* + * arch/arm/mach-kirkwood/netxbig_v2-setup.c + * + * LaCie 2Big and 5Big Network v2 board setup + * + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/i2c.h> +#include <linux/i2c/at24.h> +#include <linux/input.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/leds.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <mach/kirkwood.h> +#include <plat/time.h> +#include "common.h" +#include "mpp.h" + +/***************************************************************************** + * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005) + ****************************************************************************/ + +static struct mtd_partition netxbig_v2_flash_parts[] = { + { + .name = "u-boot", + .size = MTDPART_SIZ_FULL, + .offset = 0, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, +}; + +static const struct flash_platform_data netxbig_v2_flash = { + .type = "mx25l4005a", + .name = "spi_flash", + .parts = netxbig_v2_flash_parts, + .nr_parts = ARRAY_SIZE(netxbig_v2_flash_parts), +}; + +static struct spi_board_info __initdata netxbig_v2_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &netxbig_v2_flash, + .irq = -1, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data netxbig_v2_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static struct mv643xx_eth_platform_data netxbig_v2_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +/***************************************************************************** + * I2C devices + ****************************************************************************/ + +static struct at24_platform_data at24c04 = { + .byte_len = SZ_4K / 8, + .page_size = 16, +}; + +/* + * i2c addr | chip | description + * 0x50 | HT24LC04 | eeprom (512B) + */ + +static struct i2c_board_info __initdata netxbig_v2_i2c_info[] = { + { + I2C_BOARD_INFO("24c04", 0x50), + .platform_data = &at24c04, + } +}; + +/***************************************************************************** + * SATA + ****************************************************************************/ + +static struct mv_sata_platform_data netxbig_v2_sata_data = { + .n_ports = 2, +}; + +static int __initdata netxbig_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 }; + +static void __init netxbig_v2_sata_power_init(void) +{ + int i; + int err; + int hdd_nb; + + if (machine_is_net2big_v2()) + hdd_nb = 2; + else + hdd_nb = 5; + + /* Power up all hard disks. */ + for (i = 0; i < hdd_nb; i++) { + err = gpio_request(netxbig_v2_gpio_hdd_power[i], NULL); + if (err == 0) { + err = gpio_direction_output( + netxbig_v2_gpio_hdd_power[i], 1); + /* Free the HDD power GPIOs. This allow user-space to + * configure them via the gpiolib sysfs interface. */ + gpio_free(netxbig_v2_gpio_hdd_power[i]); + } + if (err) + pr_err("netxbig_v2: failed to power up HDD%d\n", i + 1); + } +} + +/***************************************************************************** + * GPIO keys + ****************************************************************************/ + +#define NETXBIG_V2_GPIO_SWITCH_POWER_ON 13 +#define NETXBIG_V2_GPIO_SWITCH_POWER_OFF 15 +#define NETXBIG_V2_GPIO_FUNC_BUTTON 34 + +#define NETXBIG_V2_SWITCH_POWER_ON 0x1 +#define NETXBIG_V2_SWITCH_POWER_OFF 0x2 + +static struct gpio_keys_button netxbig_v2_buttons[] = { + [0] = { + .type = EV_SW, + .code = NETXBIG_V2_SWITCH_POWER_ON, + .gpio = NETXBIG_V2_GPIO_SWITCH_POWER_ON, + .desc = "Back power switch (on|auto)", + .active_low = 1, + }, + [1] = { + .type = EV_SW, + .code = NETXBIG_V2_SWITCH_POWER_OFF, + .gpio = NETXBIG_V2_GPIO_SWITCH_POWER_OFF, + .desc = "Back power switch (auto|off)", + .active_low = 1, + }, + [2] = { + .code = KEY_OPTION, + .gpio = NETXBIG_V2_GPIO_FUNC_BUTTON, + .desc = "Function button", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data netxbig_v2_button_data = { + .buttons = netxbig_v2_buttons, + .nbuttons = ARRAY_SIZE(netxbig_v2_buttons), +}; + +static struct platform_device netxbig_v2_gpio_buttons = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &netxbig_v2_button_data, + }, +}; + +/***************************************************************************** + * GPIO LEDs + ****************************************************************************/ + +/* + * The LEDs are controlled by a CPLD and can be configured through a GPIO + * extension bus: + * + * - address register : bit [0-2] -> GPIO [47-49] + * - data register : bit [0-2] -> GPIO [44-46] + * - enable register : GPIO 29 + * + * Address register selection: + * + * addr | register + * ---------------------------- + * 0 | front LED + * 1 | front LED brightness + * 2 | HDD LED brightness + * 3 | HDD1 LED + * 4 | HDD2 LED + * 5 | HDD3 LED + * 6 | HDD4 LED + * 7 | HDD5 LED + * + * Data register configuration: + * + * data | LED brightness + * ------------------------------------------------- + * 0 | min (off) + * - | - + * 7 | max + * + * data | front LED mode + * ------------------------------------------------- + * 0 | fix off + * 1 | fix blue on + * 2 | fix red on + * 3 | blink blue on=1 sec and blue off=1 sec + * 4 | blink red on=1 sec and red off=1 sec + * 5 | blink blue on=2.5 sec and red on=0.5 sec + * 6 | blink blue on=1 sec and red on=1 sec + * 7 | blink blue on=0.5 sec and blue off=2.5 sec + * + * data | HDD LED mode + * ------------------------------------------------- + * 0 | fix blue on + * 1 | SATA activity blink + * 2 | fix red on + * 3 | blink blue on=1 sec and blue off=1 sec + * 4 | blink red on=1 sec and red off=1 sec + * 5 | blink blue on=2.5 sec and red on=0.5 sec + * 6 | blink blue on=1 sec and red on=1 sec + * 7 | blink blue on=0.5 sec and blue off=2.5 sec + */ + +/***************************************************************************** + * Timer + ****************************************************************************/ + +static void netxbig_v2_timer_init(void) +{ + kirkwood_tclk = 166666667; + orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); +} + +struct sys_timer netxbig_v2_timer = { + .init = netxbig_v2_timer_init, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +static unsigned int net2big_v2_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP6_SYSRST_OUTn, + MPP7_GPO, /* Request power-off */ + MPP8_TW_SDA, + MPP9_TW_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP13_GPIO, /* Rear power switch (on|auto) */ + MPP14_GPIO, /* USB fuse alarm */ + MPP15_GPIO, /* Rear power switch (auto|off) */ + MPP16_GPIO, /* SATA HDD1 power */ + MPP17_GPIO, /* SATA HDD2 power */ + MPP20_SATA1_ACTn, + MPP21_SATA0_ACTn, + MPP24_GPIO, /* USB mode select */ + MPP26_GPIO, /* USB device vbus */ + MPP28_GPIO, /* USB enable host vbus */ + MPP29_GPIO, /* CPLD extension ALE */ + MPP34_GPIO, /* Rear Push button */ + MPP35_GPIO, /* Inhibit switch power-off */ + MPP36_GPIO, /* SATA HDD1 presence */ + MPP37_GPIO, /* SATA HDD2 presence */ + MPP40_GPIO, /* eSATA presence */ + MPP44_GPIO, /* CPLD extension (data 0) */ + MPP45_GPIO, /* CPLD extension (data 1) */ + MPP46_GPIO, /* CPLD extension (data 2) */ + MPP47_GPIO, /* CPLD extension (addr 0) */ + MPP48_GPIO, /* CPLD extension (addr 1) */ + MPP49_GPIO, /* CPLD extension (addr 2) */ + 0 +}; + +static unsigned int net5big_v2_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP6_SYSRST_OUTn, + MPP7_GPO, /* Request power-off */ + MPP8_TW_SDA, + MPP9_TW_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP13_GPIO, /* Rear power switch (on|auto) */ + MPP14_GPIO, /* USB fuse alarm */ + MPP15_GPIO, /* Rear power switch (auto|off) */ + MPP16_GPIO, /* SATA HDD1 power */ + MPP17_GPIO, /* SATA HDD2 power */ + MPP20_GE1_0, + MPP21_GE1_1, + MPP22_GE1_2, + MPP23_GE1_3, + MPP24_GE1_4, + MPP25_GE1_5, + MPP26_GE1_6, + MPP27_GE1_7, + MPP28_GPIO, /* USB enable host vbus */ + MPP29_GPIO, /* CPLD extension ALE */ + MPP30_GE1_10, + MPP31_GE1_11, + MPP32_GE1_12, + MPP33_GE1_13, + MPP34_GPIO, /* Rear Push button */ + MPP35_GPIO, /* Inhibit switch power-off */ + MPP36_GPIO, /* SATA HDD1 presence */ + MPP37_GPIO, /* SATA HDD2 presence */ + MPP38_GPIO, /* SATA HDD3 presence */ + MPP39_GPIO, /* SATA HDD4 presence */ + MPP40_GPIO, /* SATA HDD5 presence */ + MPP41_GPIO, /* SATA HDD3 power */ + MPP42_GPIO, /* SATA HDD4 power */ + MPP43_GPIO, /* SATA HDD5 power */ + MPP44_GPIO, /* CPLD extension (data 0) */ + MPP45_GPIO, /* CPLD extension (data 1) */ + MPP46_GPIO, /* CPLD extension (data 2) */ + MPP47_GPIO, /* CPLD extension (addr 0) */ + MPP48_GPIO, /* CPLD extension (addr 1) */ + MPP49_GPIO, /* CPLD extension (addr 2) */ + 0 +}; + +#define NETXBIG_V2_GPIO_POWER_OFF 7 + +static void netxbig_v2_power_off(void) +{ + gpio_set_value(NETXBIG_V2_GPIO_POWER_OFF, 1); +} + +static void __init netxbig_v2_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + if (machine_is_net2big_v2()) + kirkwood_mpp_conf(net2big_v2_mpp_config); + else + kirkwood_mpp_conf(net5big_v2_mpp_config); + + netxbig_v2_sata_power_init(); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&netxbig_v2_ge00_data); + if (machine_is_net5big_v2()) + kirkwood_ge01_init(&netxbig_v2_ge01_data); + kirkwood_sata_init(&netxbig_v2_sata_data); + kirkwood_uart0_init(); + spi_register_board_info(netxbig_v2_spi_slave_info, + ARRAY_SIZE(netxbig_v2_spi_slave_info)); + kirkwood_spi_init(); + kirkwood_i2c_init(); + i2c_register_board_info(0, netxbig_v2_i2c_info, + ARRAY_SIZE(netxbig_v2_i2c_info)); + + platform_device_register(&netxbig_v2_gpio_buttons); + + if (gpio_request(NETXBIG_V2_GPIO_POWER_OFF, "power-off") == 0 && + gpio_direction_output(NETXBIG_V2_GPIO_POWER_OFF, 0) == 0) + pm_power_off = netxbig_v2_power_off; + else + pr_err("netxbig_v2: failed to configure power-off GPIO\n"); +} + +#ifdef CONFIG_MACH_NET2BIG_V2 +MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2") + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = netxbig_v2_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &netxbig_v2_timer, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_NET5BIG_V2 +MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2") + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = netxbig_v2_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &netxbig_v2_timer, +MACHINE_END +#endif diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index a2d307ec042..244655d323e 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -59,6 +59,13 @@ static unsigned long common_pin_config[] __initdata = { /* UART1 */ GPIO107_UART1_RXD, GPIO108_UART1_TXD, + + /* SSP1 */ + GPIO113_I2S_MCLK, + GPIO114_I2S_FRM, + GPIO115_I2S_BCLK, + GPIO116_I2S_RXD, + GPIO117_I2S_TXD, }; static struct smc91x_platdata smc91x_info = { @@ -123,12 +130,18 @@ static struct pxa3xx_nand_platform_data aspenite_nand_info = { .nr_parts = ARRAY_SIZE(aspenite_nand_partitions), }; +static struct i2c_board_info aspenite_i2c_info[] __initdata = { + { I2C_BOARD_INFO("wm8753", 0x1b), }, +}; + static void __init common_init(void) { mfp_config(ARRAY_AND_SIZE(common_pin_config)); /* on-chip devices */ pxa168_add_uart(1); + pxa168_add_twsi(1, NULL, ARRAY_AND_SIZE(aspenite_i2c_info)); + pxa168_add_ssp(1); pxa168_add_nand(&aspenite_nand_info); /* off-chip devices */ diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h index ab26d13295c..ee8b02ed801 100644 --- a/arch/arm/mach-mmp/include/mach/gpio.h +++ b/arch/arm/mach-mmp/include/mach/gpio.h @@ -10,7 +10,7 @@ #define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) #define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x)))) -#define NR_BUILTIN_GPIO (128) +#define NR_BUILTIN_GPIO (192) #define gpio_to_bank(gpio) ((gpio) >> 5) #define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio)) diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h index 02701196ea0..b379cdec4d3 100644 --- a/arch/arm/mach-mmp/include/mach/irqs.h +++ b/arch/arm/mach-mmp/include/mach/irqs.h @@ -5,10 +5,10 @@ * Interrupt numbers for PXA168 */ #define IRQ_PXA168_NONE (-1) -#define IRQ_PXA168_SSP3 0 -#define IRQ_PXA168_SSP2 1 -#define IRQ_PXA168_SSP1 2 -#define IRQ_PXA168_SSP0 3 +#define IRQ_PXA168_SSP4 0 +#define IRQ_PXA168_SSP3 1 +#define IRQ_PXA168_SSP2 2 +#define IRQ_PXA168_SSP1 3 #define IRQ_PXA168_PMIC_INT 4 #define IRQ_PXA168_RTC_INT 5 #define IRQ_PXA168_RTC_ALARM 6 @@ -20,7 +20,7 @@ #define IRQ_PXA168_TIMER2 14 #define IRQ_PXA168_TIMER3 15 #define IRQ_PXA168_CMU 16 -#define IRQ_PXA168_SSP4 17 +#define IRQ_PXA168_SSP5 17 #define IRQ_PXA168_MSP_WAKEUP 19 #define IRQ_PXA168_CF_WAKEUP 20 #define IRQ_PXA168_XD_WAKEUP 21 diff --git a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h index 9f9f8143e27..761c2dacc07 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h +++ b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h @@ -9,6 +9,175 @@ #define MFP_DRIVE_FAST (0x8 << 13) /* GPIO */ +#define GPIO0_GPIO0 MFP_CFG(GPIO0, AF0) +#define GPIO1_GPIO1 MFP_CFG(GPIO1, AF0) +#define GPIO2_GPIO2 MFP_CFG(GPIO2, AF0) +#define GPIO3_GPIO3 MFP_CFG(GPIO3, AF0) +#define GPIO4_GPIO4 MFP_CFG(GPIO4, AF0) +#define GPIO5_GPIO5 MFP_CFG(GPIO5, AF0) +#define GPIO6_GPIO6 MFP_CFG(GPIO6, AF0) +#define GPIO7_GPIO7 MFP_CFG(GPIO7, AF0) +#define GPIO8_GPIO8 MFP_CFG(GPIO8, AF0) +#define GPIO9_GPIO9 MFP_CFG(GPIO9, AF0) +#define GPIO10_GPIO10 MFP_CFG(GPIO10, AF0) +#define GPIO11_GPIO11 MFP_CFG(GPIO11, AF0) +#define GPIO12_GPIO12 MFP_CFG(GPIO12, AF0) +#define GPIO13_GPIO13 MFP_CFG(GPIO13, AF0) +#define GPIO14_GPIO14 MFP_CFG(GPIO14, AF0) +#define GPIO15_GPIO15 MFP_CFG(GPIO15, AF0) +#define GPIO16_GPIO16 MFP_CFG(GPIO16, AF0) +#define GPIO17_GPIO17 MFP_CFG(GPIO17, AF0) +#define GPIO18_GPIO18 MFP_CFG(GPIO18, AF0) +#define GPIO19_GPIO19 MFP_CFG(GPIO19, AF0) +#define GPIO20_GPIO20 MFP_CFG(GPIO20, AF0) +#define GPIO21_GPIO21 MFP_CFG(GPIO21, AF0) +#define GPIO22_GPIO22 MFP_CFG(GPIO22, AF0) +#define GPIO23_GPIO23 MFP_CFG(GPIO23, AF0) +#define GPIO24_GPIO24 MFP_CFG(GPIO24, AF0) +#define GPIO25_GPIO25 MFP_CFG(GPIO25, AF0) +#define GPIO26_GPIO26 MFP_CFG(GPIO26, AF0) +#define GPIO27_GPIO27 MFP_CFG(GPIO27, AF0) +#define GPIO28_GPIO28 MFP_CFG(GPIO28, AF0) +#define GPIO29_GPIO29 MFP_CFG(GPIO29, AF0) +#define GPIO30_GPIO30 MFP_CFG(GPIO30, AF0) +#define GPIO31_GPIO31 MFP_CFG(GPIO31, AF0) +#define GPIO32_GPIO32 MFP_CFG(GPIO32, AF0) +#define GPIO33_GPIO33 MFP_CFG(GPIO33, AF0) +#define GPIO34_GPIO34 MFP_CFG(GPIO34, AF0) +#define GPIO35_GPIO35 MFP_CFG(GPIO35, AF0) +#define GPIO36_GPIO36 MFP_CFG(GPIO36, AF0) +#define GPIO37_GPIO37 MFP_CFG(GPIO37, AF0) +#define GPIO38_GPIO38 MFP_CFG(GPIO38, AF0) +#define GPIO39_GPIO39 MFP_CFG(GPIO39, AF0) +#define GPIO40_GPIO40 MFP_CFG(GPIO40, AF0) +#define GPIO41_GPIO41 MFP_CFG(GPIO41, AF0) +#define GPIO42_GPIO42 MFP_CFG(GPIO42, AF0) +#define GPIO43_GPIO43 MFP_CFG(GPIO43, AF0) +#define GPIO44_GPIO44 MFP_CFG(GPIO44, AF0) +#define GPIO45_GPIO45 MFP_CFG(GPIO45, AF0) +#define GPIO46_GPIO46 MFP_CFG(GPIO46, AF0) +#define GPIO47_GPIO47 MFP_CFG(GPIO47, AF0) +#define GPIO48_GPIO48 MFP_CFG(GPIO48, AF0) +#define GPIO49_GPIO49 MFP_CFG(GPIO49, AF0) +#define GPIO50_GPIO50 MFP_CFG(GPIO50, AF0) +#define GPIO51_GPIO51 MFP_CFG(GPIO51, AF0) +#define GPIO52_GPIO52 MFP_CFG(GPIO52, AF0) +#define GPIO53_GPIO53 MFP_CFG(GPIO53, AF0) +#define GPIO54_GPIO54 MFP_CFG(GPIO54, AF0) +#define GPIO55_GPIO55 MFP_CFG(GPIO55, AF0) +#define GPIO56_GPIO56 MFP_CFG(GPIO56, AF0) +#define GPIO57_GPIO57 MFP_CFG(GPIO57, AF0) +#define GPIO58_GPIO58 MFP_CFG(GPIO58, AF0) +#define GPIO59_GPIO59 MFP_CFG(GPIO59, AF0) +#define GPIO60_GPIO60 MFP_CFG(GPIO60, AF0) +#define GPIO61_GPIO61 MFP_CFG(GPIO61, AF0) +#define GPIO62_GPIO62 MFP_CFG(GPIO62, AF0) +#define GPIO63_GPIO63 MFP_CFG(GPIO63, AF0) +#define GPIO64_GPIO64 MFP_CFG(GPIO64, AF0) +#define GPIO65_GPIO65 MFP_CFG(GPIO65, AF0) +#define GPIO66_GPIO66 MFP_CFG(GPIO66, AF0) +#define GPIO67_GPIO67 MFP_CFG(GPIO67, AF0) +#define GPIO68_GPIO68 MFP_CFG(GPIO68, AF0) +#define GPIO69_GPIO69 MFP_CFG(GPIO69, AF0) +#define GPIO70_GPIO70 MFP_CFG(GPIO70, AF0) +#define GPIO71_GPIO71 MFP_CFG(GPIO71, AF0) +#define GPIO72_GPIO72 MFP_CFG(GPIO72, AF0) +#define GPIO73_GPIO73 MFP_CFG(GPIO73, AF0) +#define GPIO74_GPIO74 MFP_CFG(GPIO74, AF0) +#define GPIO75_GPIO75 MFP_CFG(GPIO75, AF0) +#define GPIO76_GPIO76 MFP_CFG(GPIO76, AF0) +#define GPIO77_GPIO77 MFP_CFG(GPIO77, AF0) +#define GPIO78_GPIO78 MFP_CFG(GPIO78, AF0) +#define GPIO79_GPIO79 MFP_CFG(GPIO79, AF0) +#define GPIO80_GPIO80 MFP_CFG(GPIO80, AF0) +#define GPIO81_GPIO81 MFP_CFG(GPIO81, AF0) +#define GPIO82_GPIO82 MFP_CFG(GPIO82, AF0) +#define GPIO83_GPIO83 MFP_CFG(GPIO83, AF0) +#define GPIO84_GPIO84 MFP_CFG(GPIO84, AF0) +#define GPIO85_GPIO85 MFP_CFG(GPIO85, AF0) +#define GPIO86_GPIO86 MFP_CFG(GPIO86, AF0) +#define GPIO87_GPIO87 MFP_CFG(GPIO87, AF0) +#define GPIO88_GPIO88 MFP_CFG(GPIO88, AF0) +#define GPIO89_GPIO89 MFP_CFG(GPIO89, AF0) +#define GPIO90_GPIO90 MFP_CFG(GPIO90, AF0) +#define GPIO91_GPIO91 MFP_CFG(GPIO91, AF0) +#define GPIO92_GPIO92 MFP_CFG(GPIO92, AF0) +#define GPIO93_GPIO93 MFP_CFG(GPIO93, AF0) +#define GPIO94_GPIO94 MFP_CFG(GPIO94, AF0) +#define GPIO95_GPIO95 MFP_CFG(GPIO95, AF0) +#define GPIO96_GPIO96 MFP_CFG(GPIO96, AF0) +#define GPIO97_GPIO97 MFP_CFG(GPIO97, AF0) +#define GPIO98_GPIO98 MFP_CFG(GPIO98, AF0) +#define GPIO99_GPIO99 MFP_CFG(GPIO99, AF0) +#define GPIO100_GPIO100 MFP_CFG(GPIO100, AF0) +#define GPIO101_GPIO101 MFP_CFG(GPIO101, AF0) +#define GPIO102_GPIO102 MFP_CFG(GPIO102, AF1) +#define GPIO103_GPIO103 MFP_CFG(GPIO103, AF1) +#define GPIO104_GPIO104 MFP_CFG(GPIO104, AF1) +#define GPIO105_GPIO105 MFP_CFG(GPIO105, AF1) +#define GPIO106_GPIO106 MFP_CFG(GPIO106, AF1) +#define GPIO107_GPIO107 MFP_CFG(GPIO107, AF1) +#define GPIO108_GPIO108 MFP_CFG(GPIO108, AF1) +#define GPIO109_GPIO109 MFP_CFG(GPIO109, AF1) +#define GPIO110_GPIO110 MFP_CFG(GPIO110, AF1) +#define GPIO111_GPIO111 MFP_CFG(GPIO111, AF1) +#define GPIO112_GPIO112 MFP_CFG(GPIO112, AF1) +#define GPIO113_GPIO113 MFP_CFG(GPIO113, AF1) +#define GPIO114_GPIO114 MFP_CFG(GPIO114, AF0) +#define GPIO115_GPIO115 MFP_CFG(GPIO115, AF0) +#define GPIO116_GPIO116 MFP_CFG(GPIO116, AF0) +#define GPIO117_GPIO117 MFP_CFG(GPIO117, AF0) +#define GPIO118_GPIO118 MFP_CFG(GPIO118, AF0) +#define GPIO119_GPIO119 MFP_CFG(GPIO119, AF0) +#define GPIO120_GPIO120 MFP_CFG(GPIO120, AF0) +#define GPIO121_GPIO121 MFP_CFG(GPIO121, AF0) +#define GPIO122_GPIO122 MFP_CFG(GPIO122, AF0) +#define GPIO123_GPIO123 MFP_CFG(GPIO123, AF0) +#define GPIO124_GPIO124 MFP_CFG(GPIO124, AF0) +#define GPIO125_GPIO125 MFP_CFG(GPIO125, AF0) +#define GPIO126_GPIO126 MFP_CFG(GPIO126, AF0) +#define GPIO127_GPIO127 MFP_CFG(GPIO127, AF0) +#define GPIO128_GPIO128 MFP_CFG(GPIO128, AF0) +#define GPIO129_GPIO129 MFP_CFG(GPIO129, AF0) +#define GPIO130_GPIO130 MFP_CFG(GPIO130, AF0) +#define GPIO131_GPIO131 MFP_CFG(GPIO131, AF0) +#define GPIO132_GPIO132 MFP_CFG(GPIO132, AF0) +#define GPIO133_GPIO133 MFP_CFG(GPIO133, AF0) +#define GPIO134_GPIO134 MFP_CFG(GPIO134, AF0) +#define GPIO135_GPIO135 MFP_CFG(GPIO135, AF0) +#define GPIO136_GPIO136 MFP_CFG(GPIO136, AF0) +#define GPIO137_GPIO137 MFP_CFG(GPIO137, AF0) +#define GPIO138_GPIO138 MFP_CFG(GPIO138, AF0) +#define GPIO139_GPIO139 MFP_CFG(GPIO139, AF0) +#define GPIO140_GPIO140 MFP_CFG(GPIO140, AF0) +#define GPIO141_GPIO141 MFP_CFG(GPIO141, AF0) +#define GPIO142_GPIO142 MFP_CFG(GPIO142, AF1) +#define GPIO143_GPIO143 MFP_CFG(GPIO143, AF1) +#define GPIO144_GPIO144 MFP_CFG(GPIO144, AF1) +#define GPIO145_GPIO145 MFP_CFG(GPIO145, AF1) +#define GPIO146_GPIO146 MFP_CFG(GPIO146, AF1) +#define GPIO147_GPIO147 MFP_CFG(GPIO147, AF1) +#define GPIO148_GPIO148 MFP_CFG(GPIO148, AF1) +#define GPIO149_GPIO149 MFP_CFG(GPIO149, AF1) +#define GPIO150_GPIO150 MFP_CFG(GPIO150, AF1) +#define GPIO151_GPIO151 MFP_CFG(GPIO151, AF1) +#define GPIO152_GPIO152 MFP_CFG(GPIO152, AF1) +#define GPIO153_GPIO153 MFP_CFG(GPIO153, AF1) +#define GPIO154_GPIO154 MFP_CFG(GPIO154, AF1) +#define GPIO155_GPIO155 MFP_CFG(GPIO155, AF1) +#define GPIO156_GPIO156 MFP_CFG(GPIO156, AF1) +#define GPIO157_GPIO157 MFP_CFG(GPIO157, AF1) +#define GPIO158_GPIO158 MFP_CFG(GPIO158, AF1) +#define GPIO159_GPIO159 MFP_CFG(GPIO159, AF1) +#define GPIO160_GPIO160 MFP_CFG(GPIO160, AF1) +#define GPIO161_GPIO161 MFP_CFG(GPIO161, AF1) +#define GPIO162_GPIO162 MFP_CFG(GPIO162, AF1) +#define GPIO163_GPIO163 MFP_CFG(GPIO163, AF1) +#define GPIO164_GPIO164 MFP_CFG(GPIO164, AF1) +#define GPIO165_GPIO165 MFP_CFG(GPIO165, AF1) +#define GPIO166_GPIO166 MFP_CFG(GPIO166, AF1) +#define GPIO167_GPIO167 MFP_CFG(GPIO167, AF1) +#define GPIO168_GPIO168 MFP_CFG(GPIO168, AF1) /* DFI */ #define GPIO108_DFI_D15 MFP_CFG(GPIO108, AF0) @@ -47,7 +216,6 @@ /* Ethernet */ #define GPIO155_SM_ADVMUX MFP_CFG(GPIO155, AF2) -#define GPIO155_GPIO155 MFP_CFG(GPIO155, AF1) /* UART1 */ #define GPIO45_UART1_RXD MFP_CFG(GPIO45, AF1) @@ -159,6 +327,8 @@ #define GPIO44_TWSI2_SDA MFP_CFG_DRV(GPIO44, AF1, SLOW) #define GPIO71_TWSI3_SCL MFP_CFG_DRV(GPIO71, AF1, SLOW) #define GPIO72_TWSI3_SDA MFP_CFG_DRV(GPIO72, AF1, SLOW) +#define TWSI4_SCL MFP_CFG_DRV(TWSI4_SCL, AF0, SLOW) +#define TWSI4_SDA MFP_CFG_DRV(TWSI4_SDA, AF0, SLOW) #define GPIO99_TWSI5_SCL MFP_CFG_DRV(GPIO99, AF4, SLOW) #define GPIO100_TWSI5_SDA MFP_CFG_DRV(GPIO100, AF4, SLOW) #define GPIO97_TWSI6_SCL MFP_CFG_DRV(GPIO97, AF2, SLOW) @@ -218,21 +388,6 @@ #define GPIO69_CAM_MCLK MFP_CFG_DRV(GPIO69, AF1, FAST) #define GPIO70_CAM_PCLK MFP_CFG_DRV(GPIO70, AF1, FAST) -/* Wifi */ -#define GPIO45_GPIO45 MFP_CFG(GPIO45, AF0) -#define GPIO46_GPIO46 MFP_CFG(GPIO46, AF0) -#define GPIO21_GPIO21 MFP_CFG(GPIO21, AF0) -#define GPIO22_GPIO22 MFP_CFG(GPIO22, AF0) -#define GPIO55_GPIO55 MFP_CFG(GPIO55, AF0) -#define GPIO56_GPIO56 MFP_CFG(GPIO56, AF0) -#define GPIO57_GPIO57 MFP_CFG(GPIO57, AF0) -#define GPIO58_GPIO58 MFP_CFG(GPIO58, AF0) - -/* Codec*/ -#define GPIO23_GPIO23 MFP_CFG(GPIO23, AF0) - -#define GPIO101_GPIO101 MFP_CFG(GPIO101, AF0) - /* PMIC */ #define PMIC_PMIC_INT MFP_CFG(PMIC_INT, AF0) diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h index 459f3be9cfb..fec220bd504 100644 --- a/arch/arm/mach-mmp/include/mach/mmp2.h +++ b/arch/arm/mach-mmp/include/mach/mmp2.h @@ -39,17 +39,17 @@ static inline int mmp2_add_twsi(int id, struct i2c_pxa_platform_data *data, int ret; switch (id) { - case 0: d = &mmp2_device_twsi1; break; - case 1: d = &mmp2_device_twsi2; break; - case 2: d = &mmp2_device_twsi3; break; - case 3: d = &mmp2_device_twsi4; break; - case 4: d = &mmp2_device_twsi5; break; - case 5: d = &mmp2_device_twsi6; break; + case 1: d = &mmp2_device_twsi1; break; + case 2: d = &mmp2_device_twsi2; break; + case 3: d = &mmp2_device_twsi3; break; + case 4: d = &mmp2_device_twsi4; break; + case 5: d = &mmp2_device_twsi5; break; + case 6: d = &mmp2_device_twsi6; break; default: return -EINVAL; } - ret = i2c_register_board_info(id, info, size); + ret = i2c_register_board_info(id - 1, info, size); if (ret) return ret; diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index 3ad612cbdf0..3b2bd5d5eb0 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -14,6 +14,11 @@ extern struct pxa_device_desc pxa168_device_pwm1; extern struct pxa_device_desc pxa168_device_pwm2; extern struct pxa_device_desc pxa168_device_pwm3; extern struct pxa_device_desc pxa168_device_pwm4; +extern struct pxa_device_desc pxa168_device_ssp1; +extern struct pxa_device_desc pxa168_device_ssp2; +extern struct pxa_device_desc pxa168_device_ssp3; +extern struct pxa_device_desc pxa168_device_ssp4; +extern struct pxa_device_desc pxa168_device_ssp5; extern struct pxa_device_desc pxa168_device_nand; static inline int pxa168_add_uart(int id) @@ -67,6 +72,22 @@ static inline int pxa168_add_pwm(int id) return pxa_register_device(d, NULL, 0); } +static inline int pxa168_add_ssp(int id) +{ + struct pxa_device_desc *d = NULL; + + switch (id) { + case 1: d = &pxa168_device_ssp1; break; + case 2: d = &pxa168_device_ssp2; break; + case 3: d = &pxa168_device_ssp3; break; + case 4: d = &pxa168_device_ssp4; break; + case 5: d = &pxa168_device_ssp5; break; + default: + return -EINVAL; + } + return pxa_register_device(d, NULL, 0); +} + static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info) { return pxa_register_device(&pxa168_device_nand, info, sizeof(*info)); diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h index 712af03fd1a..1a96585336b 100644 --- a/arch/arm/mach-mmp/include/mach/regs-apbc.h +++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h @@ -26,8 +26,6 @@ #define APBC_PXA168_PWM2 APBC_REG(0x010) #define APBC_PXA168_PWM3 APBC_REG(0x014) #define APBC_PXA168_PWM4 APBC_REG(0x018) -#define APBC_PXA168_SSP1 APBC_REG(0x01c) -#define APBC_PXA168_SSP2 APBC_REG(0x020) #define APBC_PXA168_RTC APBC_REG(0x028) #define APBC_PXA168_TWSI0 APBC_REG(0x02c) #define APBC_PXA168_KPC APBC_REG(0x030) @@ -35,14 +33,16 @@ #define APBC_PXA168_AIB APBC_REG(0x03c) #define APBC_PXA168_SW_JTAG APBC_REG(0x040) #define APBC_PXA168_ONEWIRE APBC_REG(0x048) -#define APBC_PXA168_SSP3 APBC_REG(0x04c) #define APBC_PXA168_ASFAR APBC_REG(0x050) #define APBC_PXA168_ASSAR APBC_REG(0x054) -#define APBC_PXA168_SSP4 APBC_REG(0x058) -#define APBC_PXA168_SSP5 APBC_REG(0x05c) #define APBC_PXA168_TWSI1 APBC_REG(0x06c) #define APBC_PXA168_UART3 APBC_REG(0x070) #define APBC_PXA168_AC97 APBC_REG(0x084) +#define APBC_PXA168_SSP1 APBC_REG(0x81c) +#define APBC_PXA168_SSP2 APBC_REG(0x820) +#define APBC_PXA168_SSP3 APBC_REG(0x84c) +#define APBC_PXA168_SSP4 APBC_REG(0x858) +#define APBC_PXA168_SSP5 APBC_REG(0x85c) /* * APB Clock register offsets for PXA910 diff --git a/arch/arm/mach-mmp/include/mach/regs-smc.h b/arch/arm/mach-mmp/include/mach/regs-smc.h new file mode 100644 index 00000000000..e484d40d71b --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/regs-smc.h @@ -0,0 +1,37 @@ +/* + * linux/arch/arm/mach-mmp/include/mach/regs-smc.h + * + * Static Memory Controller Registers + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_REGS_SMC_H +#define __ASM_MACH_REGS_SMC_H + +#include <mach/addr-map.h> + +#define SMC_VIRT_BASE (AXI_VIRT_BASE + 0x83800) +#define SMC_REG(x) (SMC_VIRT_BASE + (x)) + +#define SMC_MSC0 SMC_REG(0x0020) +#define SMC_MSC1 SMC_REG(0x0024) +#define SMC_SXCNFG0 SMC_REG(0x0030) +#define SMC_SXCNFG1 SMC_REG(0x0034) +#define SMC_MEMCLKCFG SMC_REG(0x0068) +#define SMC_CSDFICFG0 SMC_REG(0x0090) +#define SMC_CSDFICFG1 SMC_REG(0x0094) +#define SMC_CLK_RET_DEL SMC_REG(0x00b0) +#define SMC_ADV_RET_DEL SMC_REG(0x00b4) +#define SMC_CSADRMAP0 SMC_REG(0x00c0) +#define SMC_CSADRMAP1 SMC_REG(0x00c4) +#define SMC_WE_AP0 SMC_REG(0x00e0) +#define SMC_WE_AP1 SMC_REG(0x00e4) +#define SMC_OE_AP0 SMC_REG(0x00f0) +#define SMC_OE_AP1 SMC_REG(0x00f4) +#define SMC_ADV_AP0 SMC_REG(0x0100) +#define SMC_ADV_AP1 SMC_REG(0x0104) + +#endif /* __ASM_MACH_REGS_SMC_H */ diff --git a/arch/arm/mach-mmp/include/mach/timex.h b/arch/arm/mach-mmp/include/mach/timex.h index 6cebbd0ca8f..70c9f1d88c0 100644 --- a/arch/arm/mach-mmp/include/mach/timex.h +++ b/arch/arm/mach-mmp/include/mach/timex.h @@ -6,4 +6,8 @@ * published by the Free Software Foundation. */ +#ifdef CONFIG_CPU_MMP2 +#define CLOCK_TICK_RATE 6500000 +#else #define CLOCK_TICK_RATE 3250000 +#endif diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c index cfd4d66ef80..d77dd41d60e 100644 --- a/arch/arm/mach-mmp/jasper.c +++ b/arch/arm/mach-mmp/jasper.c @@ -15,12 +15,16 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/max8649.h> +#include <linux/mfd/max8925.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/addr-map.h> #include <mach/mfp-mmp2.h> #include <mach/mmp2.h> +#include <mach/irqs.h> #include "common.h" @@ -58,6 +62,63 @@ static unsigned long jasper_pin_config[] __initdata = { GPIO149_ND_CLE, GPIO112_ND_RDY0, GPIO160_ND_RDY1, + + /* PMIC */ + PMIC_PMIC_INT | MFP_LPM_EDGE_FALL, +}; + +static struct regulator_consumer_supply max8649_supply[] = { + REGULATOR_SUPPLY("vcc_core", NULL), +}; + +static struct regulator_init_data max8649_init_data = { + .constraints = { + .name = "vcc_core range", + .min_uV = 1150000, + .max_uV = 1280000, + .always_on = 1, + .boot_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &max8649_supply[0], +}; + +static struct max8649_platform_data jasper_max8649_info = { + .mode = 2, /* VID1 = 1, VID0 = 0 */ + .extclk = 0, + .ramp_timing = MAX8649_RAMP_32MV, + .regulator = &max8649_init_data, +}; + +static struct max8925_backlight_pdata jasper_backlight_data = { + .dual_string = 0, +}; + +static struct max8925_power_pdata jasper_power_data = { + .batt_detect = 0, /* can't detect battery by ID pin */ + .topoff_threshold = MAX8925_TOPOFF_THR_10PER, + .fast_charge = MAX8925_FCHG_1000MA, +}; + +static struct max8925_platform_data jasper_max8925_info = { + .backlight = &jasper_backlight_data, + .power = &jasper_power_data, + .irq_base = IRQ_BOARD_START, +}; + +static struct i2c_board_info jasper_twsi1_info[] = { + [0] = { + .type = "max8649", + .addr = 0x60, + .platform_data = &jasper_max8649_info, + }, + [1] = { + .type = "max8925", + .addr = 0x3c, + .irq = IRQ_MMP2_PMIC, + .platform_data = &jasper_max8925_info, + }, }; static void __init jasper_init(void) @@ -67,6 +128,9 @@ static void __init jasper_init(void) /* on-chip devices */ mmp2_add_uart(1); mmp2_add_uart(3); + mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info)); + + regulator_has_full_constraints(); } MACHINE_START(MARVELL_JASPER, "Jasper Development Platform") diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 72eb9daeea9..7f5eb059bb0 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -15,11 +15,14 @@ #include <linux/init.h> #include <linux/io.h> +#include <asm/hardware/cache-tauros2.h> + #include <mach/addr-map.h> #include <mach/regs-apbc.h> #include <mach/regs-apmu.h> #include <mach/cputype.h> #include <mach/irqs.h> +#include <mach/dma.h> #include <mach/mfp.h> #include <mach/gpio.h> #include <mach/devices.h> @@ -32,7 +35,50 @@ #define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x9c) static struct mfp_addr_map mmp2_addr_map[] __initdata = { + + MFP_ADDR_X(GPIO0, GPIO58, 0x54), + MFP_ADDR_X(GPIO59, GPIO73, 0x280), + MFP_ADDR_X(GPIO74, GPIO101, 0x170), + + MFP_ADDR(GPIO102, 0x0), + MFP_ADDR(GPIO103, 0x4), + MFP_ADDR(GPIO104, 0x1fc), + MFP_ADDR(GPIO105, 0x1f8), + MFP_ADDR(GPIO106, 0x1f4), + MFP_ADDR(GPIO107, 0x1f0), + MFP_ADDR(GPIO108, 0x21c), + MFP_ADDR(GPIO109, 0x218), + MFP_ADDR(GPIO110, 0x214), + MFP_ADDR(GPIO111, 0x200), + MFP_ADDR(GPIO112, 0x244), + MFP_ADDR(GPIO113, 0x25c), + MFP_ADDR(GPIO114, 0x164), + MFP_ADDR_X(GPIO115, GPIO122, 0x260), + + MFP_ADDR(GPIO123, 0x148), + MFP_ADDR_X(GPIO124, GPIO141, 0xc), + + MFP_ADDR(GPIO142, 0x8), + MFP_ADDR_X(GPIO143, GPIO151, 0x220), + MFP_ADDR_X(GPIO152, GPIO153, 0x248), + MFP_ADDR_X(GPIO154, GPIO155, 0x254), + MFP_ADDR_X(GPIO156, GPIO159, 0x14c), + + MFP_ADDR(GPIO160, 0x250), + MFP_ADDR(GPIO161, 0x210), + MFP_ADDR(GPIO162, 0x20c), + MFP_ADDR(GPIO163, 0x208), + MFP_ADDR(GPIO164, 0x204), + MFP_ADDR(GPIO165, 0x1ec), + MFP_ADDR(GPIO166, 0x1e8), + MFP_ADDR(GPIO167, 0x1e4), + MFP_ADDR(GPIO168, 0x1e0), + + MFP_ADDR_X(TWSI1_SCL, TWSI1_SDA, 0x140), + MFP_ADDR_X(TWSI4_SCL, TWSI4_SDA, 0x2bc), + MFP_ADDR(PMIC_INT, 0x2c4), + MFP_ADDR(CLK_REQ, 0x160), MFP_ADDR_END, }; @@ -99,9 +145,13 @@ static struct clk_lookup mmp2_clkregs[] = { static int __init mmp2_init(void) { if (cpu_is_mmp2()) { +#ifdef CONFIG_CACHE_TAUROS2 + tauros2_init(); +#endif mfp_init_base(MFPR_VIRT_BASE); mfp_init_addr(mmp2_addr_map); - clks_register(ARRAY_AND_SIZE(mmp2_clkregs)); + pxa_init_dma(IRQ_MMP2_DMA_RIQ, 16); + clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs)); } return 0; diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 1873c821df9..652ae660634 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -72,6 +72,11 @@ static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000); static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000); static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000); static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000); +static APBC_CLK(ssp1, PXA168_SSP1, 4, 0); +static APBC_CLK(ssp2, PXA168_SSP2, 4, 0); +static APBC_CLK(ssp3, PXA168_SSP3, 4, 0); +static APBC_CLK(ssp4, PXA168_SSP4, 4, 0); +static APBC_CLK(ssp5, PXA168_SSP5, 4, 0); static APMU_CLK(nand, NAND, 0x01db, 208000000); @@ -85,6 +90,11 @@ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL), INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL), INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL), + INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL), + INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL), + INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL), + INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL), + INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), }; @@ -132,3 +142,8 @@ PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10); PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10); PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10); PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99); +PXA168_DEVICE(ssp1, "pxa168-ssp", 0, SSP1, 0xd401b000, 0x40, 52, 53); +PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55); +PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57); +PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59); +PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61); diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index f780086befd..b9fd5c528e5 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -29,12 +29,14 @@ endchoice config MACH_HALIBUT depends on ARCH_MSM + select CPU_V6 default y bool "Halibut Board (QCT SURF7201A)" help Support for the Qualcomm SURF7201A eval board. config MACH_TROUT + select CPU_V6 default y bool "HTC Dream (aka trout)" help diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c index 8f85f73b83a..1ee6ce4087b 100644 --- a/arch/arm/mach-mx5/clock-mx51.c +++ b/arch/arm/mach-mx5/clock-mx51.c @@ -16,6 +16,7 @@ #include <linux/io.h> #include <asm/clkdev.h> +#include <asm/div64.h> #include <mach/hardware.h> #include <mach/common.h> diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 421b82f7c63..685f34a9634 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -439,6 +439,7 @@ static void __init dns323_init(void) */ if (dns323_dev_id() == MV88F5181_DEV_ID) { dns323_leds[0].active_low = 1; + gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable"); gpio_direction_output(DNS323_GPIO_LED_POWER1, 0); } diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 5b6ee46fa7f..3b51741a481 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -19,7 +19,6 @@ config MACH_MAINSTONE config MACH_ZYLONITE bool select PXA3xx - select PXA_SSP select HAVE_PWM select PXA_HAVE_BOARD_IRQS @@ -39,7 +38,6 @@ config MACH_LITTLETON select PXA3xx select CPU_PXA300 select CPU_PXA310 - select PXA_SSP config MACH_TAVOREVB bool "PXA930 Evaluation Board (aka TavorEVB)" @@ -98,7 +96,6 @@ config MACH_ARMCORE select PXA27x select IWMMXT select PXA25x - select PXA_SSP config MACH_EM_X270 bool "CompuLab EM-x270 platform" @@ -161,7 +158,6 @@ config MACH_XCEP select MTD_CFI select MTD_CHAR select SMC91X - select PXA_SSP help PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. Tuned for usage in Libera instruments for particle accelerators. @@ -180,7 +176,6 @@ config MACH_TRIZEPS4WL depends on TRIZEPS_PXA select TRIZEPS_PCMCIA select PXA27x - select PXA_SSP choice prompt "Select base board for Trizeps module" @@ -217,7 +212,6 @@ config MACH_PCM027 bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" select PXA27x select IWMMXT - select PXA_SSP select PXA_HAVE_BOARD_IRQS config MACH_PCM990_BASEBOARD @@ -255,13 +249,19 @@ config MACH_COLIBRI320 select PXA3xx select CPU_PXA320 +config MACH_VPAC270 + bool "Voipac PXA270" + select PXA27x + select HAVE_PATA_PLATFORM + help + PXA270 based Single Board Computer. + comment "End-user Products (sorted by vendor name)" config MACH_H4700 bool "HP iPAQ hx4700" select PXA27x select IWMMXT - select PXA_SSP select HAVE_PWM select PXA_HAVE_BOARD_IRQS @@ -277,7 +277,6 @@ config MACH_MAGICIAN bool "Enable HTC Magician Support" select PXA27x select IWMMXT - select PXA_SSP select HAVE_PWM select PXA_HAVE_BOARD_IRQS @@ -431,13 +430,11 @@ config MACH_RAUMFELD_CONNECTOR bool "Raumfeld Connector" select PXA3xx select CPU_PXA300 - select PXA_SSP config MACH_RAUMFELD_SPEAKER bool "Raumfeld Speaker" select PXA3xx select CPU_PXA300 - select PXA_SSP config PXA_SHARPSL bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" @@ -461,21 +458,11 @@ config SHARPSL_PM_MAX1111 select HWMON select SENSORS_MAX1111 -config CORGI_SSP_DEPRECATED - bool - select PXA_SSP - select PXA_SSP_LEGACY - help - This option will include corgi_ssp.c and corgi_lcd.c - that corgi_ts.c and other legacy drivers (corgi_bl.c - and sharpsl_pm.c) may depend on. - config MACH_POODLE bool "Enable Sharp SL-5600 (Poodle) Support" depends on PXA_SHARPSL select PXA25x select SHARP_LOCOMO - select PXA_SSP select PXA_HAVE_BOARD_IRQS config MACH_CORGI @@ -581,6 +568,12 @@ config MACH_E800 Say Y here if you intend to run this kernel on a Toshiba e800 family PDA. +config MACH_ZIPIT2 + bool "Zipit Z2 Handheld" + select PXA27x + select HAVE_PWM + select PXA_HAVE_BOARD_IRQS + endmenu config PXA25x @@ -645,28 +638,16 @@ config CPU_PXA950 config PXA_SHARP_C7xx bool - select PXA_SSP select SHARPSL_PM help Enable support for all Sharp C7xx models config PXA_SHARP_Cxx00 bool - select PXA_SSP select SHARPSL_PM help Enable common support for Sharp Cxx00 models -config PXA_SSP - tristate - help - Enable support for PXA2xx SSP ports - -config PXA_SSP_LEGACY - bool - help - Support of legacy SSP API - config TOSA_BT tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" depends on MACH_TOSA @@ -675,6 +656,18 @@ config TOSA_BT This is a simple driver that is able to control the state of built in bluetooth chip on tosa. +config TOSA_USE_EXT_KEYCODES + bool "Tosa keyboard: use extended keycodes" + depends on MACH_TOSA + default n + help + Say Y here to enable the tosa keyboard driver to generate extended + (>= 127) keycodes. Be aware, that they can't be correctly interpreted + by either console keyboard driver or by Kdrive keybd driver. + + Say Y only if you know, what you are doing! + + config PXA_HAVE_BOARD_IRQS bool diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 86bc87b7f2d..b8f1f4bc7ca 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -14,7 +14,6 @@ obj-$(CONFIG_PXA3xx) += cpufreq-pxa3xx.o endif # Generic drivers that other drivers may depend upon -obj-$(CONFIG_PXA_SSP) += ssp.o # SoC-specific code obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o @@ -62,6 +61,7 @@ obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o +obj-$(CONFIG_MACH_VPAC270) += vpac270.o # End-user Products obj-$(CONFIG_MACH_H4700) += hx4700.o @@ -80,7 +80,6 @@ obj-$(CONFIG_MACH_PALMLD) += palmld.o obj-$(CONFIG_PALM_TREO) += palmtreo.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o -obj-$(CONFIG_CORGI_SSP_DEPRECATED) += corgi_ssp.o corgi_lcd.o obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_TOSA) += tosa.o obj-$(CONFIG_MACH_ICONTROL) += icontrol.o mxm8x10.o @@ -94,6 +93,7 @@ obj-$(CONFIG_MACH_E800) += e800.o obj-$(CONFIG_MACH_RAUMFELD_RC) += raumfeld.o obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o +obj-$(CONFIG_MACH_ZIPIT2) += z2.o # Support for blinky lights led-y := leds.o diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index d37cfa132a6..fdda6be6c39 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -30,6 +30,9 @@ #include <linux/i2c/pca953x.h> #include <linux/mfd/da903x.h> +#include <linux/regulator/machine.h> +#include <linux/power_supply.h> +#include <linux/apm-emulation.h> #include <linux/spi/spi.h> #include <linux/spi/spi_gpio.h> @@ -430,7 +433,7 @@ static inline void cm_x300_init_nand(void) {} #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) static struct pxamci_platform_data cm_x300_mci_platform_data = { - .detect_delay = 20, + .detect_delay_ms = 200, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .gpio_card_detect = GPIO82_MMC_IRQ, .gpio_card_ro = GPIO85_MMC_WP, @@ -451,7 +454,7 @@ static void cm_x300_mci2_exit(struct device *dev, void *data) } static struct pxamci_platform_data cm_x300_mci2_platform_data = { - .detect_delay = 20, + .detect_delay_ms = 200, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .init = cm_x300_mci2_init, .exit = cm_x300_mci2_exit, @@ -584,12 +587,87 @@ static void __init cm_x300_init_rtc(void) static inline void cm_x300_init_rtc(void) {} #endif +/* Battery */ +struct power_supply_info cm_x300_psy_info = { + .name = "battery", + .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, + .voltage_max_design = 4200000, + .voltage_min_design = 3000000, + .use_for_apm = 1, +}; + +static void cm_x300_battery_low(void) +{ +#if defined(CONFIG_APM_EMULATION) + apm_queue_event(APM_LOW_BATTERY); +#endif +} + +static void cm_x300_battery_critical(void) +{ +#if defined(CONFIG_APM_EMULATION) + apm_queue_event(APM_CRITICAL_SUSPEND); +#endif +} + +struct da9030_battery_info cm_x300_battery_info = { + .battery_info = &cm_x300_psy_info, + + .charge_milliamp = 1000, + .charge_millivolt = 4200, + + .vbat_low = 3600, + .vbat_crit = 3400, + .vbat_charge_start = 4100, + .vbat_charge_stop = 4200, + .vbat_charge_restart = 4000, + + .vcharge_min = 3200, + .vcharge_max = 5500, + + .tbat_low = 197, + .tbat_high = 78, + .tbat_restart = 100, + + .batmon_interval = 0, + + .battery_low = cm_x300_battery_low, + .battery_critical = cm_x300_battery_critical, +}; + +static struct regulator_consumer_supply buck2_consumers[] = { + { + .dev = NULL, + .supply = "vcc_core", + }, +}; + +static struct regulator_init_data buck2_data = { + .constraints = { + .min_uV = 1375000, + .max_uV = 1375000, + .state_mem = { + .enabled = 0, + }, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .apply_uV = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(buck2_consumers), + .consumer_supplies = buck2_consumers, +}; + /* DA9030 */ struct da903x_subdev_info cm_x300_da9030_subdevs[] = { { - .name = "da903x-backlight", - .id = DA9030_ID_WLED, - } + .name = "da903x-battery", + .id = DA9030_ID_BAT, + .platform_data = &cm_x300_battery_info, + }, + { + .name = "da903x-regulator", + .id = DA9030_ID_BUCK2, + .platform_data = &buck2_data, + }, }; static struct da903x_platform_data cm_x300_da9030_info = { @@ -599,7 +677,7 @@ static struct da903x_platform_data cm_x300_da9030_info = { static struct i2c_board_info cm_x300_pmic_info = { I2C_BOARD_INFO("da9030", 0x49), - .irq = IRQ_GPIO(0), + .irq = IRQ_WAKEUP0, .platform_data = &cm_x300_da9030_info, }; @@ -689,13 +767,13 @@ static void __init cm_x300_init(void) static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags, char **cmdline, struct meminfo *mi) { - mi->nr_banks = 2; - mi->bank[0].start = 0xa0000000; - mi->bank[0].node = 0; - mi->bank[0].size = (64*1024*1024); - mi->bank[1].start = 0xc0000000; - mi->bank[1].node = 0; - mi->bank[1].size = (64*1024*1024); + /* Make sure that mi->bank[0].start = PHYS_ADDR */ + for (; tags->hdr.size; tags = tag_next(tags)) + if (tags->hdr.tag == ATAG_MEM && + tags->u.mem.start == 0x80000000) { + tags->u.mem.start = 0xa0000000; + break; + } } MACHINE_START(CM_X300, "CM-X300 module") diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c index e6c0a2287eb..199afa2ae30 100644 --- a/arch/arm/mach-pxa/colibri-pxa3xx.c +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c @@ -96,7 +96,7 @@ static void colibri_pxa3xx_mci_exit(struct device *dev, void *data) } static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = { - .detect_delay = 20, + .detect_delay_ms = 200, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .init = colibri_pxa3xx_mci_init, .exit = colibri_pxa3xx_mci_exit, diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index da3156d8690..3d1dcb9ac08 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -106,18 +106,18 @@ static unsigned long corgi_pin_config[] __initdata = { GPIO8_MMC_CS0, /* GPIO Matrix Keypad */ - GPIO66_GPIO, /* column 0 */ - GPIO67_GPIO, /* column 1 */ - GPIO68_GPIO, /* column 2 */ - GPIO69_GPIO, /* column 3 */ - GPIO70_GPIO, /* column 4 */ - GPIO71_GPIO, /* column 5 */ - GPIO72_GPIO, /* column 6 */ - GPIO73_GPIO, /* column 7 */ - GPIO74_GPIO, /* column 8 */ - GPIO75_GPIO, /* column 9 */ - GPIO76_GPIO, /* column 10 */ - GPIO77_GPIO, /* column 11 */ + GPIO66_GPIO | MFP_LPM_DRIVE_HIGH, /* column 0 */ + GPIO67_GPIO | MFP_LPM_DRIVE_HIGH, /* column 1 */ + GPIO68_GPIO | MFP_LPM_DRIVE_HIGH, /* column 2 */ + GPIO69_GPIO | MFP_LPM_DRIVE_HIGH, /* column 3 */ + GPIO70_GPIO | MFP_LPM_DRIVE_HIGH, /* column 4 */ + GPIO71_GPIO | MFP_LPM_DRIVE_HIGH, /* column 5 */ + GPIO72_GPIO | MFP_LPM_DRIVE_HIGH, /* column 6 */ + GPIO73_GPIO | MFP_LPM_DRIVE_HIGH, /* column 7 */ + GPIO74_GPIO | MFP_LPM_DRIVE_HIGH, /* column 8 */ + GPIO75_GPIO | MFP_LPM_DRIVE_HIGH, /* column 9 */ + GPIO76_GPIO | MFP_LPM_DRIVE_HIGH, /* column 10 */ + GPIO77_GPIO | MFP_LPM_DRIVE_HIGH, /* column 11 */ GPIO58_GPIO, /* row 0 */ GPIO59_GPIO, /* row 1 */ GPIO60_GPIO, /* row 2 */ @@ -128,13 +128,20 @@ static unsigned long corgi_pin_config[] __initdata = { GPIO65_GPIO, /* row 7 */ /* GPIO */ - GPIO9_GPIO, /* CORGI_GPIO_nSD_DETECT */ - GPIO7_GPIO, /* CORGI_GPIO_nSD_WP */ - GPIO33_GPIO, /* CORGI_GPIO_SD_PWR */ - GPIO22_GPIO, /* CORGI_GPIO_IR_ON */ - GPIO44_GPIO, /* CORGI_GPIO_HSYNC */ - - GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, + GPIO9_GPIO, /* CORGI_GPIO_nSD_DETECT */ + GPIO7_GPIO, /* CORGI_GPIO_nSD_WP */ + GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_MAIN_BAT_{LOW,COVER} */ + GPIO13_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_LED_ORANGE */ + GPIO21_GPIO, /* CORGI_GPIO_ADC_TEMP */ + GPIO22_GPIO, /* CORGI_GPIO_IR_ON */ + GPIO33_GPIO, /* CORGI_GPIO_SD_PWR */ + GPIO38_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_CHRG_ON */ + GPIO43_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_CHRG_UKN */ + GPIO44_GPIO, /* CORGI_GPIO_HSYNC */ + + GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_KEY_INT */ + GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* CORGI_GPIO_AC_IN */ + GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_WAKEUP */ }; /* @@ -437,6 +444,7 @@ static struct platform_device corgiled_device = { * to give the card a chance to fully insert/eject. */ static struct pxamci_platform_data corgi_mci_platform_data = { + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .gpio_card_detect = -1, .gpio_card_ro = CORGI_GPIO_nSD_WP, @@ -672,6 +680,15 @@ static void __init corgi_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config)); + /* allow wakeup from various GPIOs */ + gpio_set_wake(CORGI_GPIO_KEY_INT, 1); + gpio_set_wake(CORGI_GPIO_WAKEUP, 1); + gpio_set_wake(CORGI_GPIO_AC_IN, 1); + gpio_set_wake(CORGI_GPIO_CHRG_FULL, 1); + + if (!machine_is_corgi()) + gpio_set_wake(CORGI_GPIO_MAIN_BAT_LOW, 1); + pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); @@ -679,7 +696,6 @@ static void __init corgi_init(void) corgi_init_spi(); pxa_set_udc_info(&udc_info); - corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250); pxa_set_mci_info(&corgi_mci_platform_data); pxa_set_ficp_info(&corgi_ficp_platform_data); pxa_set_i2c_info(NULL); diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c deleted file mode 100644 index d9b96319d49..00000000000 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ /dev/null @@ -1,288 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/corgi_lcd.c - * - * Corgi/Spitz LCD Specific Code - * - * Copyright (C) 2005 Richard Purdie - * - * Connectivity: - * Corgi - LCD to ATI Imageon w100 (Wallaby) - * Spitz - LCD to PXA Framebuffer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/delay.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/module.h> -#include <linux/string.h> -#include <mach/corgi.h> -#include <mach/hardware.h> -#include <mach/sharpsl.h> -#include <mach/spitz.h> -#include <asm/hardware/scoop.h> -#include <asm/mach/sharpsl_param.h> -#include "generic.h" - -/* Register Addresses */ -#define RESCTL_ADRS 0x00 -#define PHACTRL_ADRS 0x01 -#define DUTYCTRL_ADRS 0x02 -#define POWERREG0_ADRS 0x03 -#define POWERREG1_ADRS 0x04 -#define GPOR3_ADRS 0x05 -#define PICTRL_ADRS 0x06 -#define POLCTRL_ADRS 0x07 - -/* Register Bit Definitions */ -#define RESCTL_QVGA 0x01 -#define RESCTL_VGA 0x00 - -#define POWER1_VW_ON 0x01 /* VW Supply FET ON */ -#define POWER1_GVSS_ON 0x02 /* GVSS(-8V) Power Supply ON */ -#define POWER1_VDD_ON 0x04 /* VDD(8V),SVSS(-4V) Power Supply ON */ - -#define POWER1_VW_OFF 0x00 /* VW Supply FET OFF */ -#define POWER1_GVSS_OFF 0x00 /* GVSS(-8V) Power Supply OFF */ -#define POWER1_VDD_OFF 0x00 /* VDD(8V),SVSS(-4V) Power Supply OFF */ - -#define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */ -#define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */ -#define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */ -#define POWER0_COM_ON 0x08 /* COM Power Supply ON */ -#define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */ - -#define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */ -#define POWER0_COM_OFF 0x00 /* COM Power Supply OFF */ -#define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */ - -#define PICTRL_INIT_STATE 0x01 -#define PICTRL_INIOFF 0x02 -#define PICTRL_POWER_DOWN 0x04 -#define PICTRL_COM_SIGNAL_OFF 0x08 -#define PICTRL_DAC_SIGNAL_OFF 0x10 - -#define POLCTRL_SYNC_POL_FALL 0x01 -#define POLCTRL_EN_POL_FALL 0x02 -#define POLCTRL_DATA_POL_FALL 0x04 -#define POLCTRL_SYNC_ACT_H 0x08 -#define POLCTRL_EN_ACT_L 0x10 - -#define POLCTRL_SYNC_POL_RISE 0x00 -#define POLCTRL_EN_POL_RISE 0x00 -#define POLCTRL_DATA_POL_RISE 0x00 -#define POLCTRL_SYNC_ACT_L 0x00 -#define POLCTRL_EN_ACT_H 0x00 - -#define PHACTRL_PHASE_MANUAL 0x01 -#define DEFAULT_PHAD_QVGA (9) -#define DEFAULT_COMADJ (125) - -/* - * This is only a psuedo I2C interface. We can't use the standard kernel - * routines as the interface is write only. We just assume the data is acked... - */ -static void lcdtg_ssp_i2c_send(u8 data) -{ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, data); - udelay(10); -} - -static void lcdtg_i2c_send_bit(u8 data) -{ - lcdtg_ssp_i2c_send(data); - lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK); - lcdtg_ssp_i2c_send(data); -} - -static void lcdtg_i2c_send_start(u8 base) -{ - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT); - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK); - lcdtg_ssp_i2c_send(base); -} - -static void lcdtg_i2c_send_stop(u8 base) -{ - lcdtg_ssp_i2c_send(base); - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK); - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT); -} - -static void lcdtg_i2c_send_byte(u8 base, u8 data) -{ - int i; - for (i = 0; i < 8; i++) { - if (data & 0x80) - lcdtg_i2c_send_bit(base | POWER0_COM_DOUT); - else - lcdtg_i2c_send_bit(base); - data <<= 1; - } -} - -static void lcdtg_i2c_wait_ack(u8 base) -{ - lcdtg_i2c_send_bit(base); -} - -static void lcdtg_set_common_voltage(u8 base_data, u8 data) -{ - /* Set Common Voltage to M62332FP via I2C */ - lcdtg_i2c_send_start(base_data); - lcdtg_i2c_send_byte(base_data, 0x9c); - lcdtg_i2c_wait_ack(base_data); - lcdtg_i2c_send_byte(base_data, 0x00); - lcdtg_i2c_wait_ack(base_data); - lcdtg_i2c_send_byte(base_data, data); - lcdtg_i2c_wait_ack(base_data); - lcdtg_i2c_send_stop(base_data); -} - -/* Set Phase Adjust */ -static void lcdtg_set_phadadj(int mode) -{ - int adj; - switch(mode) { - case 480: - case 640: - /* Setting for VGA */ - adj = sharpsl_param.phadadj; - if (adj < 0) { - adj = PHACTRL_PHASE_MANUAL; - } else { - adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL; - } - break; - case 240: - case 320: - default: - /* Setting for QVGA */ - adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL; - break; - } - - corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj); -} - -static int lcd_inited; - -void corgi_lcdtg_hw_init(int mode) -{ - if (!lcd_inited) { - int comadj; - - /* Initialize Internal Logic & Port */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE - | PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF); - - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF - | POWER0_COM_OFF | POWER0_VCC5_OFF); - - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); - - /* VDD(+8V), SVSS(-4V) ON */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON); - mdelay(3); - - /* DAC ON */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON - | POWER0_COM_OFF | POWER0_VCC5_OFF); - - /* INIB = H, INI = L */ - /* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF); - - /* Set Common Voltage */ - comadj = sharpsl_param.comadj; - if (comadj < 0) - comadj = DEFAULT_COMADJ; - lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj); - - /* VCC5 ON, DAC ON */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON | - POWER0_COM_OFF | POWER0_VCC5_ON); - - /* GVSS(-8V) ON, VDD ON */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON); - mdelay(2); - - /* COM SIGNAL ON (PICTL[3] = L) */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE); - - /* COM ON, DAC ON, VCC5_ON */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON - | POWER0_COM_ON | POWER0_VCC5_ON); - - /* VW ON, GVSS ON, VDD ON */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON); - - /* Signals output enable */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, 0); - - /* Set Phase Adjust */ - lcdtg_set_phadadj(mode); - - /* Initialize for Input Signals from ATI */ - corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE - | POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H); - udelay(1000); - - lcd_inited=1; - } else { - lcdtg_set_phadadj(mode); - } - - switch(mode) { - case 480: - case 640: - /* Set Lcd Resolution (VGA) */ - corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA); - break; - case 240: - case 320: - default: - /* Set Lcd Resolution (QVGA) */ - corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA); - break; - } -} - -void corgi_lcdtg_suspend(void) -{ - /* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */ - mdelay(34); - - /* (1)VW OFF */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON); - - /* (2)COM OFF */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF); - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON); - - /* (3)Set Common Voltage Bias 0V */ - lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0); - - /* (4)GVSS OFF */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON); - - /* (5)VCC5 OFF */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF); - - /* (6)Set PDWN, INIOFF, DACOFF */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF | - PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF); - - /* (7)DAC OFF */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF); - - /* (8)VDD OFF */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); - - lcd_inited = 0; -} - diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index d4a0733e905..3f1dc74ac04 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/delay.h> +#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/apm-emulation.h> @@ -25,7 +26,8 @@ #include <mach/sharpsl.h> #include <mach/corgi.h> #include <mach/pxa2xx-regs.h> -#include <mach/pxa2xx-gpio.h> + +#include "generic.h" #include "sharpsl.h" #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ @@ -35,87 +37,46 @@ #define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */ #define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */ +static struct gpio charger_gpios[] = { + { CORGI_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" }, + { CORGI_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" }, + { CORGI_GPIO_CHRG_UKN, GPIOF_OUT_INIT_LOW, "Charger Unknown" }, + { CORGI_GPIO_KEY_INT, GPIOF_IN, "Key Interrupt" }, +}; + static void corgi_charger_init(void) { - pxa_gpio_mode(CORGI_GPIO_ADC_TEMP_ON | GPIO_OUT); - pxa_gpio_mode(CORGI_GPIO_CHRG_ON | GPIO_OUT); - pxa_gpio_mode(CORGI_GPIO_CHRG_UKN | GPIO_OUT); - pxa_gpio_mode(CORGI_GPIO_KEY_INT | GPIO_IN); + gpio_request_array(ARRAY_AND_SIZE(charger_gpios)); } static void corgi_measure_temp(int on) { - if (on) - GPSR(CORGI_GPIO_ADC_TEMP_ON) = GPIO_bit(CORGI_GPIO_ADC_TEMP_ON); - else - GPCR(CORGI_GPIO_ADC_TEMP_ON) = GPIO_bit(CORGI_GPIO_ADC_TEMP_ON); + gpio_set_value(CORGI_GPIO_ADC_TEMP_ON, on); } static void corgi_charge(int on) { if (on) { if (machine_is_corgi() && (sharpsl_pm.flags & SHARPSL_SUSPENDED)) { - GPCR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON); - GPSR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN); + gpio_set_value(CORGI_GPIO_CHRG_ON, 0); + gpio_set_value(CORGI_GPIO_CHRG_UKN, 1); } else { - GPSR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON); - GPCR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN); + gpio_set_value(CORGI_GPIO_CHRG_ON, 1); + gpio_set_value(CORGI_GPIO_CHRG_UKN, 0); } } else { - GPCR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON); - GPCR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN); + gpio_set_value(CORGI_GPIO_CHRG_ON, 0); + gpio_set_value(CORGI_GPIO_CHRG_UKN, 0); } } static void corgi_discharge(int on) { - if (on) - GPSR(CORGI_GPIO_DISCHARGE_ON) = GPIO_bit(CORGI_GPIO_DISCHARGE_ON); - else - GPCR(CORGI_GPIO_DISCHARGE_ON) = GPIO_bit(CORGI_GPIO_DISCHARGE_ON); + gpio_set_value(CORGI_GPIO_DISCHARGE_ON, on); } static void corgi_presuspend(void) { - int i; - unsigned long wakeup_mask; - - /* charging , so CHARGE_ON bit is HIGH during OFF. */ - if (READ_GPIO_BIT(CORGI_GPIO_CHRG_ON)) - PGSR1 |= GPIO_bit(CORGI_GPIO_CHRG_ON); - else - PGSR1 &= ~GPIO_bit(CORGI_GPIO_CHRG_ON); - - if (READ_GPIO_BIT(CORGI_GPIO_LED_ORANGE)) - PGSR0 |= GPIO_bit(CORGI_GPIO_LED_ORANGE); - else - PGSR0 &= ~GPIO_bit(CORGI_GPIO_LED_ORANGE); - - if (READ_GPIO_BIT(CORGI_GPIO_CHRG_UKN)) - PGSR1 |= GPIO_bit(CORGI_GPIO_CHRG_UKN); - else - PGSR1 &= ~GPIO_bit(CORGI_GPIO_CHRG_UKN); - - /* Resume on keyboard power key */ - PGSR2 = (PGSR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(0); - - wakeup_mask = GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) | GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_CHRG_FULL); - - if (!machine_is_corgi()) - wakeup_mask |= GPIO_bit(CORGI_GPIO_MAIN_BAT_LOW); - - PWER = wakeup_mask | PWER_RTC; - PRER = wakeup_mask; - PFER = wakeup_mask; - - for (i = 0; i <=15; i++) { - if (PRER & PFER & GPIO_bit(i)) { - if (GPLR0 & GPIO_bit(i) ) - PRER &= ~GPIO_bit(i); - else - PFER &= ~GPIO_bit(i); - } - } } static void corgi_postsuspend(void) diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c deleted file mode 100644 index 9347254f8bc..00000000000 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * SSP control code for Sharp Corgi devices - * - * Copyright (c) 2004-2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> - -#include <mach/ssp.h> -#include <mach/pxa2xx-gpio.h> -#include <mach/regs-ssp.h> -#include "sharpsl.h" - -static DEFINE_SPINLOCK(corgi_ssp_lock); -static struct ssp_dev corgi_ssp_dev; -static struct ssp_state corgi_ssp_state; -static struct corgissp_machinfo *ssp_machinfo; - -/* - * There are three devices connected to the SSP interface: - * 1. A touchscreen controller (TI ADS7846 compatible) - * 2. An LCD controller (with some Backlight functionality) - * 3. A battery monitoring IC (Maxim MAX1111) - * - * Each device uses a different speed/mode of communication. - * - * The touchscreen is very sensitive and the most frequently used - * so the port is left configured for this. - * - * Devices are selected using Chip Selects on GPIOs. - */ - -/* - * ADS7846 Routines - */ -unsigned long corgi_ssp_ads7846_putget(ulong data) -{ - unsigned long flag; - u32 ret = 0; - - spin_lock_irqsave(&corgi_ssp_lock, flag); - if (ssp_machinfo->cs_ads7846 >= 0) - GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); - - ssp_write_word(&corgi_ssp_dev,data); - ssp_read_word(&corgi_ssp_dev, &ret); - - if (ssp_machinfo->cs_ads7846 >= 0) - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); - spin_unlock_irqrestore(&corgi_ssp_lock, flag); - - return ret; -} - -/* - * NOTE: These functions should always be called in interrupt context - * and use the _lock and _unlock functions. They are very time sensitive. - */ -void corgi_ssp_ads7846_lock(void) -{ - spin_lock(&corgi_ssp_lock); - if (ssp_machinfo->cs_ads7846 >= 0) - GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); -} - -void corgi_ssp_ads7846_unlock(void) -{ - if (ssp_machinfo->cs_ads7846 >= 0) - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); - spin_unlock(&corgi_ssp_lock); -} - -void corgi_ssp_ads7846_put(ulong data) -{ - ssp_write_word(&corgi_ssp_dev,data); -} - -unsigned long corgi_ssp_ads7846_get(void) -{ - u32 ret = 0; - ssp_read_word(&corgi_ssp_dev, &ret); - return ret; -} - -EXPORT_SYMBOL(corgi_ssp_ads7846_putget); -EXPORT_SYMBOL(corgi_ssp_ads7846_lock); -EXPORT_SYMBOL(corgi_ssp_ads7846_unlock); -EXPORT_SYMBOL(corgi_ssp_ads7846_put); -EXPORT_SYMBOL(corgi_ssp_ads7846_get); - - -/* - * LCD/Backlight Routines - */ -unsigned long corgi_ssp_dac_put(ulong data) -{ - unsigned long flag, sscr1 = SSCR1_SPH; - u32 tmp; - - spin_lock_irqsave(&corgi_ssp_lock, flag); - - if (machine_is_spitz() || machine_is_akita() || machine_is_borzoi()) - sscr1 = 0; - - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon)); - ssp_enable(&corgi_ssp_dev); - - if (ssp_machinfo->cs_lcdcon >= 0) - GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); - ssp_write_word(&corgi_ssp_dev,data); - /* Read null data back from device to prevent SSP overflow */ - ssp_read_word(&corgi_ssp_dev, &tmp); - if (ssp_machinfo->cs_lcdcon >= 0) - GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); - - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); - ssp_enable(&corgi_ssp_dev); - - spin_unlock_irqrestore(&corgi_ssp_lock, flag); - - return 0; -} - -void corgi_ssp_lcdtg_send(u8 adrs, u8 data) -{ - corgi_ssp_dac_put(((adrs & 0x07) << 5) | (data & 0x1f)); -} - -void corgi_ssp_blduty_set(int duty) -{ - corgi_ssp_lcdtg_send(0x02,duty); -} - -EXPORT_SYMBOL(corgi_ssp_lcdtg_send); -EXPORT_SYMBOL(corgi_ssp_blduty_set); - -/* - * Max1111 Routines - */ -int corgi_ssp_max1111_get(ulong data) -{ - unsigned long flag; - long voltage = 0, voltage1 = 0, voltage2 = 0; - - spin_lock_irqsave(&corgi_ssp_lock, flag); - if (ssp_machinfo->cs_max1111 >= 0) - GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111)); - ssp_enable(&corgi_ssp_dev); - - udelay(1); - - /* TB1/RB1 */ - ssp_write_word(&corgi_ssp_dev,data); - ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); /* null read */ - - /* TB12/RB2 */ - ssp_write_word(&corgi_ssp_dev,0); - ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); - - /* TB13/RB3*/ - ssp_write_word(&corgi_ssp_dev,0); - ssp_read_word(&corgi_ssp_dev, (u32*)&voltage2); - - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); - ssp_enable(&corgi_ssp_dev); - if (ssp_machinfo->cs_max1111 >= 0) - GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); - spin_unlock_irqrestore(&corgi_ssp_lock, flag); - - if (voltage1 & 0xc0 || voltage2 & 0x3f) - voltage = -1; - else - voltage = ((voltage1 << 2) & 0xfc) | ((voltage2 >> 6) & 0x03); - - return voltage; -} - -EXPORT_SYMBOL(corgi_ssp_max1111_get); - -/* - * Support Routines - */ - -void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo) -{ - ssp_machinfo = machinfo; -} - -static int __devinit corgi_ssp_probe(struct platform_device *dev) -{ - int ret; - - /* Chip Select - Disable All */ - if (ssp_machinfo->cs_lcdcon >= 0) - pxa_gpio_mode(ssp_machinfo->cs_lcdcon | GPIO_OUT | GPIO_DFLT_HIGH); - if (ssp_machinfo->cs_max1111 >= 0) - pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH); - if (ssp_machinfo->cs_ads7846 >= 0) - pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH); - - ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0); - - if (ret) - printk(KERN_ERR "Unable to register SSP handler!\n"); - else { - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); - ssp_enable(&corgi_ssp_dev); - } - - return ret; -} - -static int corgi_ssp_remove(struct platform_device *dev) -{ - ssp_exit(&corgi_ssp_dev); - return 0; -} - -static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state) -{ - ssp_flush(&corgi_ssp_dev); - ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state); - - return 0; -} - -static int corgi_ssp_resume(struct platform_device *dev) -{ - if (ssp_machinfo->cs_lcdcon >= 0) - GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ - if (ssp_machinfo->cs_max1111 >= 0) - GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ - if (ssp_machinfo->cs_ads7846 >= 0) - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ - ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state); - ssp_enable(&corgi_ssp_dev); - - return 0; -} - -static struct platform_driver corgissp_driver = { - .probe = corgi_ssp_probe, - .remove = corgi_ssp_remove, - .suspend = corgi_ssp_suspend, - .resume = corgi_ssp_resume, - .driver = { - .name = "corgi-ssp", - }, -}; - -int __init corgi_ssp_init(void) -{ - return platform_driver_register(&corgissp_driver); -} - -arch_initcall(corgi_ssp_init); diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index 88575b87bd3..91fd4fea6a5 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -125,18 +125,9 @@ static unsigned long csb726_pin_config[] = { GPIO118_I2C_SDA, }; -static struct pxamci_platform_data csb726_mci_data; - -static int csb726_mci_init(struct device *dev, - irq_handler_t detect, void *data) -{ - csb726_mci_data.detect_delay = msecs_to_jiffies(500); - return 0; -} - static struct pxamci_platform_data csb726_mci = { + .detect_delay_ms = 500, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .init = csb726_mci_init, /* FIXME setpower */ .gpio_card_detect = CSB726_GPIO_MMC_DETECT, .gpio_card_ro = CSB726_GPIO_MMC_RO, diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index aab04f33e49..0517c17978f 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -626,6 +626,7 @@ static int em_x270_mci_get_ro(struct device *dev) } static struct pxamci_platform_data em_x270_mci_platform_data = { + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23| MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27| MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30| @@ -643,7 +644,6 @@ static void __init em_x270_init_mmc(void) if (machine_is_em_x270()) em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro; - em_x270_mci_platform_data.detect_delay = msecs_to_jiffies(250); pxa_set_mci_info(&em_x270_mci_platform_data); } #else diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 3126a35aa00..baabb3ce088 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -28,7 +28,6 @@ #include <mach/reset.h> #include <mach/gpio.h> -#include <mach/pxa2xx-gpio.h> #include "generic.h" @@ -128,33 +127,3 @@ void __init pxa_map_io(void) iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); get_clk_frequency_khz(1); } - -/* - * Configure pins for GPIO or other functions - */ -int pxa_gpio_mode(int gpio_mode) -{ - unsigned long flags; - int gpio = gpio_mode & GPIO_MD_MASK_NR; - int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8; - int gafr; - - if (gpio > pxa_last_gpio) - return -EINVAL; - - local_irq_save(flags); - if (gpio_mode & GPIO_DFLT_LOW) - GPCR(gpio) = GPIO_bit(gpio); - else if (gpio_mode & GPIO_DFLT_HIGH) - GPSR(gpio) = GPIO_bit(gpio); - if (gpio_mode & GPIO_MD_MASK_DIR) - GPDR(gpio) |= GPIO_bit(gpio); - else - GPDR(gpio) &= ~GPIO_bit(gpio); - gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2)); - GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2)); - local_irq_restore(flags); - - return 0; -} -EXPORT_SYMBOL(pxa_gpio_mode); diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 811743c5614..5f2ba8d9015 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -2,6 +2,7 @@ #define _COLIBRI_H_ #include <net/ax88796.h> +#include <mach/mfp.h> /* * common settings for all modules diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h index 7239281788d..585970ef08c 100644 --- a/arch/arm/mach-pxa/include/mach/corgi.h +++ b/arch/arm/mach-pxa/include/mach/corgi.h @@ -113,7 +113,6 @@ * Shared data structures */ extern struct platform_device corgiscoop_device; -extern struct platform_device corgissp_device; #endif /* __ASM_ARCH_CORGI_H */ diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index 7515757d691..3d8d8cb0968 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -202,7 +202,7 @@ #define __cpu_is_pxa950(id) \ ({ \ unsigned int _id = (id) >> 4 & 0xfff; \ - id == 0x697; \ + _id == 0x697; \ }) #else #define __cpu_is_pxa950(id) (0) diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h index 658b28ed129..c54cef25895 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h @@ -25,6 +25,8 @@ #define MFP_DIR(x) (((x) >> 23) & 0x1) #define MFP_LPM_CAN_WAKEUP (0x1 << 24) +#define MFP_LPM_KEEP_OUTPUT (0x1 << 25) + #define WAKEUP_ON_EDGE_RISE (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE) #define WAKEUP_ON_EDGE_FALL (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL) #define WAKEUP_ON_EDGE_BOTH (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH) diff --git a/arch/arm/mach-pxa/include/mach/mmc.h b/arch/arm/mach-pxa/include/mach/mmc.h index 02a69dc2ee6..9eb515bb799 100644 --- a/arch/arm/mach-pxa/include/mach/mmc.h +++ b/arch/arm/mach-pxa/include/mach/mmc.h @@ -9,7 +9,7 @@ struct mmc_host; struct pxamci_platform_data { unsigned int ocr_mask; /* available voltages */ - unsigned long detect_delay; /* delay in jiffies before detecting cards after interrupt */ + unsigned long detect_delay_ms; /* delay in millisecond before detecting cards after interrupt */ int (*init)(struct device *, irq_handler_t , void *); int (*get_ro)(struct device *); void (*setpower)(struct device *, unsigned int); diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h deleted file mode 100644 index 1209c44aa6f..00000000000 --- a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h +++ /dev/null @@ -1,375 +0,0 @@ -#ifndef __ASM_ARCH_PXA2XX_GPIO_H -#define __ASM_ARCH_PXA2XX_GPIO_H - -#warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h - -#include <mach/gpio.h> - -/* GPIO alternate function assignments */ - -#define GPIO1_RST 1 /* reset */ -#define GPIO6_MMCCLK 6 /* MMC Clock */ -#define GPIO7_48MHz 7 /* 48 MHz clock output */ -#define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */ -#define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */ -#define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */ -#define GPIO11_3_6MHz 11 /* 3.6 MHz oscillator out */ -#define GPIO12_32KHz 12 /* 32 kHz out */ -#define GPIO12_CIF_DD_7 12 /* Camera data pin 7 */ -#define GPIO13_MBGNT 13 /* memory controller grant */ -#define GPIO14_MBREQ 14 /* alternate bus master request */ -#define GPIO15_nCS_1 15 /* chip select 1 */ -#define GPIO16_PWM0 16 /* PWM0 output */ -#define GPIO17_PWM1 17 /* PWM1 output */ -#define GPIO17_CIF_DD_6 17 /* Camera data pin 6 */ -#define GPIO18_RDY 18 /* Ext. Bus Ready */ -#define GPIO19_DREQ1 19 /* External DMA Request */ -#define GPIO20_DREQ0 20 /* External DMA Request */ -#define GPIO23_SCLK 23 /* SSP clock */ -#define GPIO23_CIF_MCLK 23 /* Camera Master Clock */ -#define GPIO24_SFRM 24 /* SSP Frame */ -#define GPIO24_CIF_FV 24 /* Camera frame start signal */ -#define GPIO25_STXD 25 /* SSP transmit */ -#define GPIO25_CIF_LV 25 /* Camera line start signal */ -#define GPIO26_SRXD 26 /* SSP receive */ -#define GPIO26_CIF_PCLK 26 /* Camera Pixel Clock */ -#define GPIO27_SEXTCLK 27 /* SSP ext_clk */ -#define GPIO27_CIF_DD_0 27 /* Camera data pin 0 */ -#define GPIO28_BITCLK 28 /* AC97/I2S bit_clk */ -#define GPIO29_SDATA_IN 29 /* AC97 Sdata_in0 / I2S Sdata_in */ -#define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */ -#define GPIO31_SYNC 31 /* AC97/I2S sync */ -#define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */ -#define GPIO32_SYSCLK 32 /* I2S System Clock */ -#define GPIO32_MMCCLK 32 /* MMC Clock (PXA270) */ -#define GPIO33_nCS_5 33 /* chip select 5 */ -#define GPIO34_FFRXD 34 /* FFUART receive */ -#define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */ -#define GPIO35_FFCTS 35 /* FFUART Clear to send */ -#define GPIO36_FFDCD 36 /* FFUART Data carrier detect */ -#define GPIO37_FFDSR 37 /* FFUART data set ready */ -#define GPIO38_FFRI 38 /* FFUART Ring Indicator */ -#define GPIO39_MMCCS1 39 /* MMC Chip Select 1 */ -#define GPIO39_FFTXD 39 /* FFUART transmit data */ -#define GPIO40_FFDTR 40 /* FFUART data terminal Ready */ -#define GPIO41_FFRTS 41 /* FFUART request to send */ -#define GPIO42_BTRXD 42 /* BTUART receive data */ -#define GPIO42_HWRXD 42 /* HWUART receive data */ -#define GPIO42_CIF_MCLK 42 /* Camera Master Clock */ -#define GPIO43_BTTXD 43 /* BTUART transmit data */ -#define GPIO43_HWTXD 43 /* HWUART transmit data */ -#define GPIO43_CIF_FV 43 /* Camera frame start signal */ -#define GPIO44_BTCTS 44 /* BTUART clear to send */ -#define GPIO44_HWCTS 44 /* HWUART clear to send */ -#define GPIO44_CIF_LV 44 /* Camera line start signal */ -#define GPIO45_BTRTS 45 /* BTUART request to send */ -#define GPIO45_HWRTS 45 /* HWUART request to send */ -#define GPIO45_AC97_SYSCLK 45 /* AC97 System Clock */ -#define GPIO45_CIF_PCLK 45 /* Camera Pixel Clock */ -#define GPIO46_ICPRXD 46 /* ICP receive data */ -#define GPIO46_STRXD 46 /* STD_UART receive data */ -#define GPIO47_ICPTXD 47 /* ICP transmit data */ -#define GPIO47_STTXD 47 /* STD_UART transmit data */ -#define GPIO47_CIF_DD_0 47 /* Camera data pin 0 */ -#define GPIO48_nPOE 48 /* Output Enable for Card Space */ -#define GPIO48_CIF_DD_5 48 /* Camera data pin 5 */ -#define GPIO49_nPWE 49 /* Write Enable for Card Space */ -#define GPIO50_nPIOR 50 /* I/O Read for Card Space */ -#define GPIO50_CIF_DD_3 50 /* Camera data pin 3 */ -#define GPIO51_nPIOW 51 /* I/O Write for Card Space */ -#define GPIO51_CIF_DD_2 51 /* Camera data pin 2 */ -#define GPIO52_nPCE_1 52 /* Card Enable for Card Space */ -#define GPIO52_CIF_DD_4 52 /* Camera data pin 4 */ -#define GPIO53_nPCE_2 53 /* Card Enable for Card Space */ -#define GPIO53_MMCCLK 53 /* MMC Clock */ -#define GPIO53_CIF_MCLK 53 /* Camera Master Clock */ -#define GPIO54_MMCCLK 54 /* MMC Clock */ -#define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */ -#define GPIO54_nPCE_2 54 /* Card Enable for Card Space (PXA27x) */ -#define GPIO54_CIF_PCLK 54 /* Camera Pixel Clock */ -#define GPIO55_nPREG 55 /* Card Address bit 26 */ -#define GPIO55_CIF_DD_1 55 /* Camera data pin 1 */ -#define GPIO56_nPWAIT 56 /* Wait signal for Card Space */ -#define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */ -#define GPIO58_LDD_0 58 /* LCD data pin 0 */ -#define GPIO59_LDD_1 59 /* LCD data pin 1 */ -#define GPIO60_LDD_2 60 /* LCD data pin 2 */ -#define GPIO61_LDD_3 61 /* LCD data pin 3 */ -#define GPIO62_LDD_4 62 /* LCD data pin 4 */ -#define GPIO63_LDD_5 63 /* LCD data pin 5 */ -#define GPIO64_LDD_6 64 /* LCD data pin 6 */ -#define GPIO65_LDD_7 65 /* LCD data pin 7 */ -#define GPIO66_LDD_8 66 /* LCD data pin 8 */ -#define GPIO66_MBREQ 66 /* alternate bus master req */ -#define GPIO67_LDD_9 67 /* LCD data pin 9 */ -#define GPIO67_MMCCS0 67 /* MMC Chip Select 0 */ -#define GPIO68_LDD_10 68 /* LCD data pin 10 */ -#define GPIO68_MMCCS1 68 /* MMC Chip Select 1 */ -#define GPIO69_LDD_11 69 /* LCD data pin 11 */ -#define GPIO69_MMCCLK 69 /* MMC_CLK */ -#define GPIO70_LDD_12 70 /* LCD data pin 12 */ -#define GPIO70_RTCCLK 70 /* Real Time clock (1 Hz) */ -#define GPIO71_LDD_13 71 /* LCD data pin 13 */ -#define GPIO71_3_6MHz 71 /* 3.6 MHz Oscillator clock */ -#define GPIO72_LDD_14 72 /* LCD data pin 14 */ -#define GPIO72_32kHz 72 /* 32 kHz clock */ -#define GPIO73_LDD_15 73 /* LCD data pin 15 */ -#define GPIO73_MBGNT 73 /* Memory controller grant */ -#define GPIO74_LCD_FCLK 74 /* LCD Frame clock */ -#define GPIO75_LCD_LCLK 75 /* LCD line clock */ -#define GPIO76_LCD_PCLK 76 /* LCD Pixel clock */ -#define GPIO77_LCD_ACBIAS 77 /* LCD AC Bias */ -#define GPIO78_nCS_2 78 /* chip select 2 */ -#define GPIO79_nCS_3 79 /* chip select 3 */ -#define GPIO80_nCS_4 80 /* chip select 4 */ -#define GPIO81_NSCLK 81 /* NSSP clock */ -#define GPIO81_CIF_DD_0 81 /* Camera data pin 0 */ -#define GPIO82_NSFRM 82 /* NSSP Frame */ -#define GPIO82_CIF_DD_5 82 /* Camera data pin 5 */ -#define GPIO83_NSTXD 83 /* NSSP transmit */ -#define GPIO83_CIF_DD_4 83 /* Camera data pin 4 */ -#define GPIO84_NSRXD 84 /* NSSP receive */ -#define GPIO84_CIF_FV 84 /* Camera frame start signal */ -#define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */ -#define GPIO85_CIF_LV 85 /* Camera line start signal */ -#define GPIO90_CIF_DD_4 90 /* Camera data pin 4 */ -#define GPIO91_CIF_DD_5 91 /* Camera data pin 5 */ -#define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */ -#define GPIO93_CIF_DD_6 93 /* Camera data pin 6 */ -#define GPIO94_CIF_DD_5 94 /* Camera data pin 5 */ -#define GPIO95_CIF_DD_4 95 /* Camera data pin 4 */ -#define GPIO96_FFRXD 96 /* FFUART recieve */ -#define GPIO98_FFRTS 98 /* FFUART request to send */ -#define GPIO98_CIF_DD_0 98 /* Camera data pin 0 */ -#define GPIO99_FFTXD 99 /* FFUART transmit data */ -#define GPIO100_FFCTS 100 /* FFUART Clear to send */ -#define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */ -#define GPIO103_CIF_DD_3 103 /* Camera data pin 3 */ -#define GPIO104_CIF_DD_2 104 /* Camera data pin 2 */ -#define GPIO105_CIF_DD_1 105 /* Camera data pin 1 */ -#define GPIO106_CIF_DD_9 106 /* Camera data pin 9 */ -#define GPIO107_CIF_DD_8 107 /* Camera data pin 8 */ -#define GPIO108_CIF_DD_7 108 /* Camera data pin 7 */ -#define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */ -#define GPIO110_MMCDAT2 110 /* MMC DAT2 (PXA27x) */ -#define GPIO110_MMCCS0 110 /* MMC Chip Select 0 (PXA27x) */ -#define GPIO111_MMCDAT3 111 /* MMC DAT3 (PXA27x) */ -#define GPIO111_MMCCS1 111 /* MMC Chip Select 1 (PXA27x) */ -#define GPIO112_MMCCMD 112 /* MMC CMD (PXA27x) */ -#define GPIO113_I2S_SYSCLK 113 /* I2S System Clock (PXA27x) */ -#define GPIO113_AC97_RESET_N 113 /* AC97 NRESET on (PXA27x) */ -#define GPIO114_CIF_DD_1 114 /* Camera data pin 1 */ -#define GPIO115_CIF_DD_3 115 /* Camera data pin 3 */ -#define GPIO116_CIF_DD_2 116 /* Camera data pin 2 */ - -/* GPIO alternate function mode & direction */ - -#define GPIO_IN 0x000 -#define GPIO_OUT 0x080 -#define GPIO_ALT_FN_1_IN 0x100 -#define GPIO_ALT_FN_1_OUT 0x180 -#define GPIO_ALT_FN_2_IN 0x200 -#define GPIO_ALT_FN_2_OUT 0x280 -#define GPIO_ALT_FN_3_IN 0x300 -#define GPIO_ALT_FN_3_OUT 0x380 -#define GPIO_MD_MASK_NR 0x07f -#define GPIO_MD_MASK_DIR 0x080 -#define GPIO_MD_MASK_FN 0x300 -#define GPIO_DFLT_LOW 0x400 -#define GPIO_DFLT_HIGH 0x800 - -#define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN) -#define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT) -#define GPIO7_48MHz_MD ( 7 | GPIO_ALT_FN_1_OUT) -#define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT) -#define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT) -#define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT) -#define GPIO11_3_6MHz_MD (11 | GPIO_ALT_FN_1_OUT) -#define GPIO12_32KHz_MD (12 | GPIO_ALT_FN_1_OUT) -#define GPIO12_CIF_DD_7_MD (12 | GPIO_ALT_FN_2_IN) -#define GPIO13_MBGNT_MD (13 | GPIO_ALT_FN_2_OUT) -#define GPIO14_MBREQ_MD (14 | GPIO_ALT_FN_1_IN) -#define GPIO15_nCS_1_MD (15 | GPIO_ALT_FN_2_OUT) -#define GPIO16_PWM0_MD (16 | GPIO_ALT_FN_2_OUT) -#define GPIO17_PWM1_MD (17 | GPIO_ALT_FN_2_OUT) -#define GPIO17_CIF_DD_6_MD (17 | GPIO_ALT_FN_2_IN) -#define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN) -#define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN) -#define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN) -#define GPIO23_CIF_MCLK_MD (23 | GPIO_ALT_FN_1_OUT) -#define GPIO23_SCLK_MD (23 | GPIO_ALT_FN_2_OUT) -#define GPIO24_CIF_FV_MD (24 | GPIO_ALT_FN_1_OUT) -#define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT) -#define GPIO25_CIF_LV_MD (25 | GPIO_ALT_FN_1_OUT) -#define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT) -#define GPIO26_SRXD_MD (26 | GPIO_ALT_FN_1_IN) -#define GPIO26_CIF_PCLK_MD (26 | GPIO_ALT_FN_2_IN) -#define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN) -#define GPIO27_CIF_DD_0_MD (27 | GPIO_ALT_FN_3_IN) -#define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN) -#define GPIO28_BITCLK_IN_I2S_MD (28 | GPIO_ALT_FN_2_IN) -#define GPIO28_BITCLK_OUT_I2S_MD (28 | GPIO_ALT_FN_1_OUT) -#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) -#define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN) -#define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT) -#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) -#define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT) -#define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) -#define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) -#define GPIO32_SYSCLK_I2S_MD (32 | GPIO_ALT_FN_1_OUT) -#define GPIO32_MMCCLK_MD (32 | GPIO_ALT_FN_2_OUT) -#define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT) -#define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN) -#define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT) -#define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN) -#define GPIO35_KP_MKOUT6_MD (35 | GPIO_ALT_FN_2_OUT) -#define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN) -#define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN) -#define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN) -#define GPIO39_MMCCS1_MD (39 | GPIO_ALT_FN_1_OUT) -#define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT) -#define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT) -#define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) -#define GPIO41_KP_MKOUT7_MD (41 | GPIO_ALT_FN_1_OUT) -#define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN) -#define GPIO42_HWRXD_MD (42 | GPIO_ALT_FN_3_IN) -#define GPIO42_CIF_MCLK_MD (42 | GPIO_ALT_FN_3_OUT) -#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) -#define GPIO43_HWTXD_MD (43 | GPIO_ALT_FN_3_OUT) -#define GPIO43_CIF_FV_MD (43 | GPIO_ALT_FN_3_OUT) -#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN) -#define GPIO44_HWCTS_MD (44 | GPIO_ALT_FN_3_IN) -#define GPIO44_CIF_LV_MD (44 | GPIO_ALT_FN_3_OUT) -#define GPIO45_CIF_PCLK_MD (45 | GPIO_ALT_FN_3_IN) -#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) -#define GPIO45_HWRTS_MD (45 | GPIO_ALT_FN_3_OUT) -#define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT) -#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) -#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) -#define GPIO47_CIF_DD_0_MD (47 | GPIO_ALT_FN_1_IN) -#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) -#define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT) -#define GPIO48_CIF_DD_5_MD (48 | GPIO_ALT_FN_1_IN) -#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) -#define GPIO48_HWTXD_MD (48 | GPIO_ALT_FN_1_OUT) -#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) -#define GPIO49_HWRXD_MD (49 | GPIO_ALT_FN_1_IN) -#define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT) -#define GPIO50_CIF_DD_3_MD (50 | GPIO_ALT_FN_1_IN) -#define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT) -#define GPIO50_HWCTS_MD (50 | GPIO_ALT_FN_1_IN) -#define GPIO50_CIF_DD_3_MD (50 | GPIO_ALT_FN_1_IN) -#define GPIO51_CIF_DD_2_MD (51 | GPIO_ALT_FN_1_IN) -#define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT) -#define GPIO51_HWRTS_MD (51 | GPIO_ALT_FN_1_OUT) -#define GPIO51_CIF_DD_2_MD (51 | GPIO_ALT_FN_1_IN) -#define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT) -#define GPIO52_CIF_DD_4_MD (52 | GPIO_ALT_FN_1_IN) -#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) -#define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT) -#define GPIO53_CIF_MCLK_MD (53 | GPIO_ALT_FN_2_OUT) -#define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT) -#define GPIO54_nPCE_2_MD (54 | GPIO_ALT_FN_2_OUT) -#define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT) -#define GPIO54_CIF_PCLK_MD (54 | GPIO_ALT_FN_3_IN) -#define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT) -#define GPIO55_CIF_DD_1_MD (55 | GPIO_ALT_FN_1_IN) -#define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN) -#define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN) -#define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT) -#define GPIO59_LDD_1_MD (59 | GPIO_ALT_FN_2_OUT) -#define GPIO60_LDD_2_MD (60 | GPIO_ALT_FN_2_OUT) -#define GPIO61_LDD_3_MD (61 | GPIO_ALT_FN_2_OUT) -#define GPIO62_LDD_4_MD (62 | GPIO_ALT_FN_2_OUT) -#define GPIO63_LDD_5_MD (63 | GPIO_ALT_FN_2_OUT) -#define GPIO64_LDD_6_MD (64 | GPIO_ALT_FN_2_OUT) -#define GPIO65_LDD_7_MD (65 | GPIO_ALT_FN_2_OUT) -#define GPIO66_LDD_8_MD (66 | GPIO_ALT_FN_2_OUT) -#define GPIO66_MBREQ_MD (66 | GPIO_ALT_FN_1_IN) -#define GPIO67_LDD_9_MD (67 | GPIO_ALT_FN_2_OUT) -#define GPIO67_MMCCS0_MD (67 | GPIO_ALT_FN_1_OUT) -#define GPIO68_LDD_10_MD (68 | GPIO_ALT_FN_2_OUT) -#define GPIO68_MMCCS1_MD (68 | GPIO_ALT_FN_1_OUT) -#define GPIO69_LDD_11_MD (69 | GPIO_ALT_FN_2_OUT) -#define GPIO69_MMCCLK_MD (69 | GPIO_ALT_FN_1_OUT) -#define GPIO70_LDD_12_MD (70 | GPIO_ALT_FN_2_OUT) -#define GPIO70_RTCCLK_MD (70 | GPIO_ALT_FN_1_OUT) -#define GPIO71_LDD_13_MD (71 | GPIO_ALT_FN_2_OUT) -#define GPIO71_3_6MHz_MD (71 | GPIO_ALT_FN_1_OUT) -#define GPIO72_LDD_14_MD (72 | GPIO_ALT_FN_2_OUT) -#define GPIO72_32kHz_MD (72 | GPIO_ALT_FN_1_OUT) -#define GPIO73_LDD_15_MD (73 | GPIO_ALT_FN_2_OUT) -#define GPIO73_MBGNT_MD (73 | GPIO_ALT_FN_1_OUT) -#define GPIO74_LCD_FCLK_MD (74 | GPIO_ALT_FN_2_OUT) -#define GPIO75_LCD_LCLK_MD (75 | GPIO_ALT_FN_2_OUT) -#define GPIO76_LCD_PCLK_MD (76 | GPIO_ALT_FN_2_OUT) -#define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT) -#define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT) -#define GPIO78_nPCE_2_MD (78 | GPIO_ALT_FN_1_OUT) -#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) -#define GPIO79_pSKTSEL_MD (79 | GPIO_ALT_FN_1_OUT) -#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) -#define GPIO81_NSSP_CLK_OUT (81 | GPIO_ALT_FN_1_OUT) -#define GPIO81_NSSP_CLK_IN (81 | GPIO_ALT_FN_1_IN) -#define GPIO81_CIF_DD_0_MD (81 | GPIO_ALT_FN_2_IN) -#define GPIO82_NSSP_FRM_OUT (82 | GPIO_ALT_FN_1_OUT) -#define GPIO82_NSSP_FRM_IN (82 | GPIO_ALT_FN_1_IN) -#define GPIO82_CIF_DD_5_MD (82 | GPIO_ALT_FN_3_IN) -#define GPIO83_NSSP_TX (83 | GPIO_ALT_FN_1_OUT) -#define GPIO83_NSSP_RX (83 | GPIO_ALT_FN_2_IN) -#define GPIO83_CIF_DD_4_MD (83 | GPIO_ALT_FN_3_IN) -#define GPIO84_NSSP_TX (84 | GPIO_ALT_FN_1_OUT) -#define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN) -#define GPIO84_CIF_FV_MD (84 | GPIO_ALT_FN_3_IN) -#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT) -#define GPIO85_CIF_LV_MD (85 | GPIO_ALT_FN_3_IN) -#define GPIO86_nPCE_1_MD (86 | GPIO_ALT_FN_1_OUT) -#define GPIO88_USBH1_PWR_MD (88 | GPIO_ALT_FN_1_IN) -#define GPIO89_USBH1_PEN_MD (89 | GPIO_ALT_FN_2_OUT) -#define GPIO90_CIF_DD_4_MD (90 | GPIO_ALT_FN_3_IN) -#define GPIO91_CIF_DD_5_MD (91 | GPIO_ALT_FN_3_IN) -#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT) -#define GPIO93_CIF_DD_6_MD (93 | GPIO_ALT_FN_2_IN) -#define GPIO94_CIF_DD_5_MD (94 | GPIO_ALT_FN_2_IN) -#define GPIO95_CIF_DD_4_MD (95 | GPIO_ALT_FN_2_IN) -#define GPIO95_KP_MKIN6_MD (95 | GPIO_ALT_FN_3_IN) -#define GPIO96_KP_DKIN3_MD (96 | GPIO_ALT_FN_1_IN) -#define GPIO96_FFRXD_MD (96 | GPIO_ALT_FN_3_IN) -#define GPIO97_KP_MKIN3_MD (97 | GPIO_ALT_FN_3_IN) -#define GPIO98_CIF_DD_0_MD (98 | GPIO_ALT_FN_2_IN) -#define GPIO98_FFRTS_MD (98 | GPIO_ALT_FN_3_OUT) -#define GPIO99_FFTXD_MD (99 | GPIO_ALT_FN_3_OUT) -#define GPIO100_KP_MKIN0_MD (100 | GPIO_ALT_FN_1_IN) -#define GPIO101_KP_MKIN1_MD (101 | GPIO_ALT_FN_1_IN) -#define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT) -#define GPIO102_KP_MKIN2_MD (102 | GPIO_ALT_FN_1_IN) -#define GPIO103_CIF_DD_3_MD (103 | GPIO_ALT_FN_1_IN) -#define GPIO103_KP_MKOUT0_MD (103 | GPIO_ALT_FN_2_OUT) -#define GPIO104_CIF_DD_2_MD (104 | GPIO_ALT_FN_1_IN) -#define GPIO104_pSKTSEL_MD (104 | GPIO_ALT_FN_1_OUT) -#define GPIO104_KP_MKOUT1_MD (104 | GPIO_ALT_FN_2_OUT) -#define GPIO105_CIF_DD_1_MD (105 | GPIO_ALT_FN_1_IN) -#define GPIO105_KP_MKOUT2_MD (105 | GPIO_ALT_FN_2_OUT) -#define GPIO106_CIF_DD_9_MD (106 | GPIO_ALT_FN_1_IN) -#define GPIO106_KP_MKOUT3_MD (106 | GPIO_ALT_FN_2_OUT) -#define GPIO107_CIF_DD_8_MD (107 | GPIO_ALT_FN_1_IN) -#define GPIO107_KP_MKOUT4_MD (107 | GPIO_ALT_FN_2_OUT) -#define GPIO108_CIF_DD_7_MD (108 | GPIO_ALT_FN_1_IN) -#define GPIO108_KP_MKOUT5_MD (108 | GPIO_ALT_FN_2_OUT) -#define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCCS0_MD (110 | GPIO_ALT_FN_1_OUT) -#define GPIO111_MMCDAT3_MD (111 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCCS1_MD (111 | GPIO_ALT_FN_1_OUT) -#define GPIO112_MMCCMD_MD (112 | GPIO_ALT_FN_1_OUT) -#define GPIO113_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT) -#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT) -#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_IN) -#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN) - -/* - * Handy routine to set GPIO alternate functions - */ -extern int pxa_gpio_mode( int gpio_mode ); - -#endif /* __ASM_ARCH_PXA2XX_GPIO_H */ diff --git a/arch/arm/mach-pxa/include/mach/regs-u2d.h b/arch/arm/mach-pxa/include/mach/regs-u2d.h index 44b0b20b69a..c15c0c57de0 100644 --- a/arch/arm/mach-pxa/include/mach/regs-u2d.h +++ b/arch/arm/mach-pxa/include/mach/regs-u2d.h @@ -166,7 +166,8 @@ #define U2DMACSR_BUSERRTYPE (7 << 10) /* PX Bus Error Type */ #define U2DMACSR_EORINTR (1 << 9) /* End Of Receive */ #define U2DMACSR_REQPEND (1 << 8) /* Request Pending */ -#define U2DMACSR_RASINTR (1 << 4) /* Request After Channel Stopped (read / write 1 clear) */#define U2DMACSR_STOPINTR (1 << 3) /* Stop Interrupt (read only) */ +#define U2DMACSR_RASINTR (1 << 4) /* Request After Channel Stopped (read / write 1 clear) */ +#define U2DMACSR_STOPINTR (1 << 3) /* Stop Interrupt (read only) */ #define U2DMACSR_ENDINTR (1 << 2) /* End Interrupt (read / write 1 clear) */ #define U2DMACSR_STARTINTR (1 << 1) /* Start Interrupt (read / write 1 clear) */ #define U2DMACSR_BUSERRINTR (1 << 0) /* Bus Error Interrupt (read / write 1 clear) */ diff --git a/arch/arm/mach-pxa/include/mach/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h deleted file mode 100644 index be1be5b6db5..00000000000 --- a/arch/arm/mach-pxa/include/mach/ssp.h +++ /dev/null @@ -1,109 +0,0 @@ -/* - * ssp.h - * - * Copyright (C) 2003 Russell King, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This driver supports the following PXA CPU/SSP ports:- - * - * PXA250 SSP - * PXA255 SSP, NSSP - * PXA26x SSP, NSSP, ASSP - * PXA27x SSP1, SSP2, SSP3 - * PXA3xx SSP1, SSP2, SSP3, SSP4 - */ - -#ifndef __ASM_ARCH_SSP_H -#define __ASM_ARCH_SSP_H - -#include <linux/list.h> -#include <linux/io.h> - -enum pxa_ssp_type { - SSP_UNDEFINED = 0, - PXA25x_SSP, /* pxa 210, 250, 255, 26x */ - PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ - PXA27x_SSP, -}; - -struct ssp_device { - struct platform_device *pdev; - struct list_head node; - - struct clk *clk; - void __iomem *mmio_base; - unsigned long phys_base; - - const char *label; - int port_id; - int type; - int use_count; - int irq; - int drcmr_rx; - int drcmr_tx; -}; - -#ifdef CONFIG_PXA_SSP_LEGACY -/* - * SSP initialisation flags - */ -#define SSP_NO_IRQ 0x1 /* don't register an irq handler in SSP driver */ - -struct ssp_state { - u32 cr0; - u32 cr1; - u32 to; - u32 psp; -}; - -struct ssp_dev { - struct ssp_device *ssp; - u32 port; - u32 mode; - u32 flags; - u32 psp_flags; - u32 speed; - int irq; -}; - -int ssp_write_word(struct ssp_dev *dev, u32 data); -int ssp_read_word(struct ssp_dev *dev, u32 *data); -int ssp_flush(struct ssp_dev *dev); -void ssp_enable(struct ssp_dev *dev); -void ssp_disable(struct ssp_dev *dev); -void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp); -void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp); -int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags); -int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed); -void ssp_exit(struct ssp_dev *dev); -#endif /* CONFIG_PXA_SSP_LEGACY */ - -/** - * ssp_write_reg - Write to a SSP register - * - * @dev: SSP device to access - * @reg: Register to write to - * @val: Value to be written. - */ -static inline void ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val) -{ - __raw_writel(val, dev->mmio_base + reg); -} - -/** - * ssp_read_reg - Read from a SSP register - * - * @dev: SSP device to access - * @reg: Register to read from - */ -static inline u32 ssp_read_reg(struct ssp_device *dev, u32 reg) -{ - return __raw_readl(dev->mmio_base + reg); -} - -struct ssp_device *ssp_request(int port, const char *label); -void ssp_free(struct ssp_device *); -#endif /* __ASM_ARCH_SSP_H */ diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h index 4df2d38507d..1bbd1f2e4be 100644 --- a/arch/arm/mach-pxa/include/mach/tosa.h +++ b/arch/arm/mach-pxa/include/mach/tosa.h @@ -167,7 +167,7 @@ #define TOSA_KEY_SYNC KEY_102ND /* ??? */ -#ifndef CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES +#ifndef CONFIG_TOSA_USE_EXT_KEYCODES #define TOSA_KEY_RECORD KEY_YEN #define TOSA_KEY_ADDRESSBOOK KEY_KATAKANA #define TOSA_KEY_CANCEL KEY_ESC diff --git a/arch/arm/mach-pxa/include/mach/vpac270.h b/arch/arm/mach-pxa/include/mach/vpac270.h new file mode 100644 index 00000000000..7bfa3dd0fd5 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/vpac270.h @@ -0,0 +1,42 @@ +/* + * GPIOs and interrupts for Voipac PXA270 + * + * Copyright (C) 2010 + * Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _INCLUDE_VPAC270_H_ +#define _INCLUDE_VPAC270_H_ + +#define GPIO1_VPAC270_USER_BTN 1 + +#define GPIO15_VPAC270_LED_ORANGE 15 + +#define GPIO81_VPAC270_BKL_ON 81 +#define GPIO83_VPAC270_NL_ON 83 + +#define GPIO52_VPAC270_SD_READONLY 52 +#define GPIO53_VPAC270_SD_DETECT_N 53 + +#define GPIO84_VPAC270_PCMCIA_CD 84 +#define GPIO35_VPAC270_PCMCIA_RDY 35 +#define GPIO107_VPAC270_PCMCIA_PPEN 107 +#define GPIO11_VPAC270_PCMCIA_RESET 11 +#define GPIO17_VPAC270_CF_CD 17 +#define GPIO12_VPAC270_CF_RDY 12 +#define GPIO16_VPAC270_CF_RESET 16 + +#define GPIO41_VPAC270_UDC_DETECT 41 + +#define GPIO114_VPAC270_ETH_IRQ 114 + +#define GPIO36_VPAC270_IDE_IRQ 36 + +#define GPIO113_VPAC270_TS_IRQ 113 + +#endif diff --git a/arch/arm/mach-pxa/include/mach/z2.h b/arch/arm/mach-pxa/include/mach/z2.h new file mode 100644 index 00000000000..8835c16bc82 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/z2.h @@ -0,0 +1,41 @@ +/* + * arch/arm/mach-pxa/include/mach/z2.h + * + * Author: Ken McGuire + * Created: Feb 6, 2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ASM_ARCH_ZIPIT2_H +#define ASM_ARCH_ZIPIT2_H + +/* LEDs */ +#define GPIO10_ZIPITZ2_LED_WIFI 10 +#define GPIO85_ZIPITZ2_LED_CHARGED 85 +#define GPIO83_ZIPITZ2_LED_CHARGING 83 + +/* SD/MMC */ +#define GPIO96_ZIPITZ2_SD_DETECT 96 + +/* GPIO Buttons */ +#define GPIO1_ZIPITZ2_POWER_BUTTON 1 +#define GPIO98_ZIPITZ2_LID_BUTTON 98 + +/* Libertas GSPI8686 WiFi */ +#define GPIO14_ZIPITZ2_WIFI_RESET 14 +#define GPIO15_ZIPITZ2_WIFI_POWER 15 +#define GPIO24_ZIPITZ2_WIFI_CS 24 +#define GPIO36_ZIPITZ2_WIFI_IRQ 36 + +/* LCD */ +#define GPIO19_ZIPITZ2_LCD_RESET 19 +#define GPIO88_ZIPITZ2_LCD_CS 88 + +/* MISC GPIOs */ +#define GPIO0_ZIPITZ2_AC_DETECT 0 +#define GPIO37_ZIPITZ2_HEADSET_DETECT 37 + +#endif diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index fa527b258d6..9b9046185b0 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -41,7 +41,6 @@ #include <mach/pxa300.h> #include <mach/pxafb.h> -#include <mach/ssp.h> #include <mach/mmc.h> #include <mach/pxa2xx_spi.h> #include <mach/pxa27x_keypad.h> @@ -272,7 +271,7 @@ static inline void littleton_init_keypad(void) {} #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) static struct pxamci_platform_data littleton_mci_platform_data = { - .detect_delay = 20, + .detect_delay_ms = 200, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .gpio_card_detect = GPIO_MMC1_CARD_DETECT, .gpio_card_ro = -1, diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 63d65a2a038..330c3282856 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -478,7 +478,7 @@ static void lubbock_mci_exit(struct device *dev, void *data) static struct pxamci_platform_data lubbock_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .detect_delay = 1, + .detect_delay_ms = 10, .init = lubbock_mci_init, .get_ro = lubbock_mci_get_ro, .exit = lubbock_mci_exit, diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index cf6b720c055..1d1419b7345 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -81,6 +81,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c) PGSR(bank) &= ~mask; is_out = 1; break; + case MFP_LPM_INPUT: case MFP_LPM_DEFAULT: break; default: @@ -178,8 +179,17 @@ int gpio_set_wake(unsigned int gpio, unsigned int on) if (!d->valid) return -EINVAL; - if (d->keypad_gpio) - return -EINVAL; + /* Allow keypad GPIOs to wakeup system when + * configured as generic GPIOs. + */ + if (d->keypad_gpio && (MFP_AF(d->config) == 0) && + (d->config & MFP_LPM_CAN_WAKEUP)) { + if (on) + PKWR |= d->mask; + else + PKWR &= ~d->mask; + return 0; + } mux_taken = (PWER & d->mux_mask) & (~d->mask); if (on && mux_taken) @@ -239,21 +249,25 @@ static int pxa27x_pkwr_gpio[] = { int keypad_set_wake(unsigned int on) { unsigned int i, gpio, mask = 0; - - if (!on) { - PKWR = 0; - return 0; - } + struct gpio_desc *d; for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) { gpio = pxa27x_pkwr_gpio[i]; + d = &gpio_desc[gpio]; - if (gpio_desc[gpio].config & MFP_LPM_CAN_WAKEUP) + /* skip if configured as generic GPIO */ + if (MFP_AF(d->config) == 0) + continue; + + if (d->config & MFP_LPM_CAN_WAKEUP) mask |= gpio_desc[gpio].mask; } - PKWR = mask; + if (on) + PKWR |= mask; + else + PKWR &= ~mask; return 0; } @@ -328,6 +342,17 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state) { int i; + /* set corresponding PGSR bit of those marked MFP_LPM_KEEP_OUTPUT */ + for (i = 0; i < pxa_last_gpio; i++) { + if ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) && + (GPDR(i) & GPIO_bit(i))) { + if (GPLR(i) & GPIO_bit(i)) + PGSR(i) |= GPIO_bit(i); + else + PGSR(i) &= ~GPIO_bit(i); + } + } + for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) { saved_gafr[0][i] = GAFR_L(i); diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 7a50ed8fce9..d60db87dde0 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -426,6 +426,7 @@ struct gpio_vbus_mach_info gpio_vbus_data = { * to give the card a chance to fully insert/eject. */ static struct pxamci_platform_data mioa701_mci_info = { + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .gpio_card_detect = GPIO15_SDIO_INSERT, .gpio_card_ro = GPIO78_SDIO_RO, @@ -791,7 +792,6 @@ static void __init mioa701_machine_init(void) mio_gpio_request(ARRAY_AND_SIZE(global_gpios)); bootstrap_init(); set_pxa_fb_info(&mioa701_pxafb_info); - mioa701_mci_info.detect_delay = msecs_to_jiffies(250); pxa_set_mci_info(&mioa701_mci_info); pxa_set_keypad_info(&mioa701_keypad_info); wm97xx_bat_set_pdata(&mioa701_battery_data); diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c index 8c9c6f0d56b..462167ac05f 100644 --- a/arch/arm/mach-pxa/mxm8x10.c +++ b/arch/arm/mach-pxa/mxm8x10.c @@ -325,7 +325,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = { #if defined(CONFIG_MMC) static struct pxamci_platform_data mxm_8x10_mci_platform_data = { .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .detect_delay = 1, + .detect_delay_ms = 10, .gpio_card_detect = MXM_8X10_SD_nCD, .gpio_card_ro = MXM_8X10_SD_WP, .gpio_power = -1 diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index f70c75b3876..1963819dba9 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -168,7 +168,7 @@ static struct pxamci_platform_data palmld_mci_platform_data = { .gpio_card_detect = GPIO_NR_PALMLD_SD_DETECT_N, .gpio_card_ro = GPIO_NR_PALMLD_SD_READONLY, .gpio_power = GPIO_NR_PALMLD_SD_POWER, - .detect_delay = 20, + .detect_delay_ms = 200, }; /****************************************************************************** diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index d902a813aae..5305a3993e6 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -110,7 +110,7 @@ static struct pxamci_platform_data palmt5_mci_platform_data = { .gpio_card_detect = GPIO_NR_PALMT5_SD_DETECT_N, .gpio_card_ro = GPIO_NR_PALMT5_SD_READONLY, .gpio_power = GPIO_NR_PALMT5_SD_POWER, - .detect_delay = 20, + .detect_delay_ms = 200, }; /****************************************************************************** diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 717d7a63867..033b567e50b 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -121,7 +121,7 @@ static struct pxamci_platform_data palmtc_mci_platform_data = { .gpio_power = GPIO_NR_PALMTC_SD_POWER, .gpio_card_ro = GPIO_NR_PALMTC_SD_READONLY, .gpio_card_detect = GPIO_NR_PALMTC_SD_DETECT_N, - .detect_delay = 20, + .detect_delay_ms = 200, }; /****************************************************************************** diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 007b58c11f8..ecc1a401598 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -170,7 +170,7 @@ static struct pxamci_platform_data palmtx_mci_platform_data = { .gpio_card_detect = GPIO_NR_PALMTX_SD_DETECT_N, .gpio_card_ro = GPIO_NR_PALMTX_SD_READONLY, .gpio_power = GPIO_NR_PALMTX_SD_POWER, - .detect_delay = 20, + .detect_delay_ms = 200, }; /****************************************************************************** diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 9d0ecea1760..f56ae100875 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -326,7 +326,7 @@ static void pcm990_mci_exit(struct device *dev, void *data) #define MSECS_PER_JIFFY (1000/HZ) static struct pxamci_platform_data pcm990_mci_platform_data = { - .detect_delay = 250 / MSECS_PER_JIFFY, + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .init = pcm990_mci_init, .setpower = pcm990_mci_setpower, diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index d58a52415d7..f4abdaafdac 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -40,13 +40,12 @@ #include <mach/pxa25x.h> #include <mach/mmc.h> #include <mach/udc.h> -#include <plat/i2c.h> #include <mach/irda.h> #include <mach/poodle.h> #include <mach/pxafb.h> #include <mach/sharpsl.h> -#include <mach/ssp.h> #include <mach/pxa2xx_spi.h> +#include <plat/i2c.h> #include <asm/hardware/scoop.h> #include <asm/hardware/locomo.h> @@ -277,6 +276,7 @@ static void poodle_mci_exit(struct device *dev, void *data) } static struct pxamci_platform_data poodle_mci_platform_data = { + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .init = poodle_mci_init, .setpower = poodle_mci_setpower, @@ -450,7 +450,6 @@ static void __init poodle_init(void) set_pxa_fb_parent(&poodle_locomo_device.dev); set_pxa_fb_info(&poodle_fb_info); pxa_set_udc_info(&udc_info); - poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250); pxa_set_mci_info(&poodle_mci_platform_data); pxa_set_ficp_info(&poodle_ficp_platform_data); pxa_set_i2c_info(NULL); diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 4d7c03e7250..f544e58e153 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -29,7 +29,6 @@ #include <mach/ohci.h> #include <mach/pm.h> #include <mach/dma.h> -#include <mach/ssp.h> #include <mach/regs-intc.h> #include <plat/i2c.h> diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 44bb675e47f..d4b61b3f08f 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -714,7 +714,7 @@ static void raumfeld_mci_exit(struct device *dev, void *data) static struct pxamci_platform_data raumfeld_mci_platform_data = { .init = raumfeld_mci_init, .exit = raumfeld_mci_exit, - .detect_delay = 20, + .detect_delay_ms = 200, .gpio_card_detect = -1, .gpio_card_ro = -1, .gpio_power = -1, @@ -983,7 +983,7 @@ static void __init raumfeld_common_init(void) int i; for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++) - if (!strcmp(gpio_keys_button[i].desc, "on/off button")) + if (!strcmp(gpio_keys_button[i].desc, "on_off button")) gpio_keys_button[i].active_low = 1; } @@ -1009,8 +1009,7 @@ static void __init raumfeld_common_init(void) gpio_direction_output(GPIO_W2W_PDN, 0); /* this can be used to switch off the device */ - ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, - "supply shutdown"); + ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown"); if (ret < 0) pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n"); else diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h index 1439785d397..0cc1203c5be 100644 --- a/arch/arm/mach-pxa/sharpsl.h +++ b/arch/arm/mach-pxa/sharpsl.h @@ -10,29 +10,6 @@ #include <mach/sharpsl_pm.h> /* - * SharpSL SSP Driver - */ -struct corgissp_machinfo { - int port; - int cs_lcdcon; - int cs_ads7846; - int cs_max1111; - int clk_lcdcon; - int clk_ads7846; - int clk_max1111; -}; - -void corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo); - - -/* - * SharpSL/Corgi LCD Driver - */ -void corgi_lcdtg_suspend(void); -void corgi_lcdtg_hw_init(int mode); - - -/* * SharpSL Battery/PM Driver */ #define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x)) diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 463d874bb86..cb4767251f3 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -28,7 +28,6 @@ #include <asm/mach-types.h> #include <mach/pm.h> #include <mach/pxa2xx-regs.h> -#include <mach/pxa2xx-gpio.h> #include <mach/regs-rtc.h> #include <mach/sharpsl.h> #include <mach/sharpsl_pm.h> diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 19b5109d980..4d2413ed0ff 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -86,6 +86,7 @@ static unsigned long spitz_pin_config[] __initdata = { /* GPIOs */ GPIO9_GPIO, /* SPITZ_GPIO_nSD_DETECT */ + GPIO16_GPIO, /* SPITZ_GPIO_SYNC */ GPIO81_GPIO, /* SPITZ_GPIO_nSD_WP */ GPIO41_GPIO, /* SPITZ_GPIO_USB_CONNECT */ GPIO37_GPIO, /* SPITZ_GPIO_USB_HOST */ @@ -119,7 +120,8 @@ static unsigned long spitz_pin_config[] __initdata = { GPIO117_I2C_SCL, GPIO118_I2C_SDA, - GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, + GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, /* SPITZ_GPIO_KEY_INT */ + GPIO1_GPIO | WAKEUP_ON_EDGE_FALL, /* SPITZ_GPIO_RESET */ }; /* @@ -363,7 +365,7 @@ static struct gpio_keys_button spitz_gpio_keys[] = { .type = EV_PWR, .code = KEY_SUSPEND, .gpio = SPITZ_GPIO_ON_KEY, - .desc = "On/Off", + .desc = "On Off", .wakeup = 1, }, /* Two buttons detecting the lid state */ @@ -537,6 +539,7 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd) } static struct pxamci_platform_data spitz_mci_platform_data = { + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .setpower = spitz_mci_setpower, .gpio_card_detect = SPITZ_GPIO_nSD_DETECT, @@ -757,7 +760,6 @@ static void __init common_init(void) spitz_init_spi(); platform_add_devices(devices, ARRAY_SIZE(devices)); - spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250); pxa_set_mci_info(&spitz_mci_platform_data); pxa_set_ohci_info(&spitz_ohci_platform_data); pxa_set_ficp_info(&spitz_ficp_platform_data); diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index fc5a70c4035..4209ddf6da6 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -24,9 +24,10 @@ #include <mach/sharpsl.h> #include <mach/spitz.h> -#include <mach/pxa2xx-regs.h> -#include <mach/pxa2xx-gpio.h> +#include <mach/pxa27x.h> + #include "sharpsl.h" +#include "generic.h" #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ #define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */ @@ -37,10 +38,17 @@ static int spitz_last_ac_status; +static struct gpio spitz_charger_gpios[] = { + { SPITZ_GPIO_KEY_INT, GPIOF_IN, "Keyboard Interrupt" }, + { SPITZ_GPIO_SYNC, GPIOF_IN, "Sync" }, + { SPITZ_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" }, + { SPITZ_GPIO_JK_B, GPIOF_OUT_INIT_LOW, "JK B" }, + { SPITZ_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" }, +}; + static void spitz_charger_init(void) { - pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN); - pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN); + gpio_request_array(ARRAY_AND_SIZE(spitz_charger_gpios)); } static void spitz_measure_temp(int on) @@ -76,6 +84,11 @@ static void spitz_discharge1(int on) gpio_set_value(SPITZ_GPIO_LED_GREEN, on); } +static unsigned long gpio18_config[] = { + GPIO18_RDY, + GPIO18_GPIO, +}; + static void spitz_presuspend(void) { spitz_last_ac_status = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN); @@ -97,7 +110,9 @@ static void spitz_presuspend(void) PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0); - pxa_gpio_mode(GPIO18_RDY|GPIO_OUT | GPIO_DFLT_HIGH); + pxa2xx_mfp_config(&gpio18_config[0], 1); + gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown"); + gpio_free(18); PRER = GPIO_bit(SPITZ_GPIO_KEY_INT); PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET); @@ -114,8 +129,7 @@ static void spitz_presuspend(void) static void spitz_postsuspend(void) { - pxa_gpio_mode(GPIO18_RDY_MD); - pxa_gpio_mode(10 | GPIO_IN); + pxa2xx_mfp_config(&gpio18_config[1], 1); } static int spitz_should_wakeup(unsigned int resume_on_alarm) diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c deleted file mode 100644 index a81d6dbf662..00000000000 --- a/arch/arm/mach-pxa/ssp.c +++ /dev/null @@ -1,510 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/ssp.c - * - * based on linux/arch/arm/mach-sa1100/ssp.c by Russell King - * - * Copyright (C) 2003 Russell King. - * Copyright (C) 2003 Wolfson Microelectronics PLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * PXA2xx SSP driver. This provides the generic core for simple - * IO-based SSP applications and allows easy port setup for DMA access. - * - * Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com> - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <linux/mutex.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <mach/hardware.h> -#include <mach/ssp.h> -#include <mach/regs-ssp.h> - -#ifdef CONFIG_PXA_SSP_LEGACY - -#define TIMEOUT 100000 - -static irqreturn_t ssp_interrupt(int irq, void *dev_id) -{ - struct ssp_dev *dev = dev_id; - struct ssp_device *ssp = dev->ssp; - unsigned int status; - - status = __raw_readl(ssp->mmio_base + SSSR); - __raw_writel(status, ssp->mmio_base + SSSR); - - if (status & SSSR_ROR) - printk(KERN_WARNING "SSP(%d): receiver overrun\n", dev->port); - - if (status & SSSR_TUR) - printk(KERN_WARNING "SSP(%d): transmitter underrun\n", dev->port); - - if (status & SSSR_BCE) - printk(KERN_WARNING "SSP(%d): bit count error\n", dev->port); - - return IRQ_HANDLED; -} - -/** - * ssp_write_word - write a word to the SSP port - * @data: 32-bit, MSB justified data to write. - * - * Wait for a free entry in the SSP transmit FIFO, and write a data - * word to the SSP port. - * - * The caller is expected to perform the necessary locking. - * - * Returns: - * %-ETIMEDOUT timeout occurred - * 0 success - */ -int ssp_write_word(struct ssp_dev *dev, u32 data) -{ - struct ssp_device *ssp = dev->ssp; - int timeout = TIMEOUT; - - while (!(__raw_readl(ssp->mmio_base + SSSR) & SSSR_TNF)) { - if (!--timeout) - return -ETIMEDOUT; - cpu_relax(); - } - - __raw_writel(data, ssp->mmio_base + SSDR); - - return 0; -} - -/** - * ssp_read_word - read a word from the SSP port - * - * Wait for a data word in the SSP receive FIFO, and return the - * received data. Data is LSB justified. - * - * Note: Currently, if data is not expected to be received, this - * function will wait for ever. - * - * The caller is expected to perform the necessary locking. - * - * Returns: - * %-ETIMEDOUT timeout occurred - * 32-bit data success - */ -int ssp_read_word(struct ssp_dev *dev, u32 *data) -{ - struct ssp_device *ssp = dev->ssp; - int timeout = TIMEOUT; - - while (!(__raw_readl(ssp->mmio_base + SSSR) & SSSR_RNE)) { - if (!--timeout) - return -ETIMEDOUT; - cpu_relax(); - } - - *data = __raw_readl(ssp->mmio_base + SSDR); - return 0; -} - -/** - * ssp_flush - flush the transmit and receive FIFOs - * - * Wait for the SSP to idle, and ensure that the receive FIFO - * is empty. - * - * The caller is expected to perform the necessary locking. - */ -int ssp_flush(struct ssp_dev *dev) -{ - struct ssp_device *ssp = dev->ssp; - int timeout = TIMEOUT * 2; - - /* ensure TX FIFO is empty instead of not full */ - if (cpu_is_pxa3xx()) { - while (__raw_readl(ssp->mmio_base + SSSR) & 0xf00) { - if (!--timeout) - return -ETIMEDOUT; - cpu_relax(); - } - timeout = TIMEOUT * 2; - } - - do { - while (__raw_readl(ssp->mmio_base + SSSR) & SSSR_RNE) { - if (!--timeout) - return -ETIMEDOUT; - (void)__raw_readl(ssp->mmio_base + SSDR); - } - if (!--timeout) - return -ETIMEDOUT; - } while (__raw_readl(ssp->mmio_base + SSSR) & SSSR_BSY); - - return 0; -} - -/** - * ssp_enable - enable the SSP port - * - * Turn on the SSP port. - */ -void ssp_enable(struct ssp_dev *dev) -{ - struct ssp_device *ssp = dev->ssp; - uint32_t sscr0; - - sscr0 = __raw_readl(ssp->mmio_base + SSCR0); - sscr0 |= SSCR0_SSE; - __raw_writel(sscr0, ssp->mmio_base + SSCR0); -} - -/** - * ssp_disable - shut down the SSP port - * - * Turn off the SSP port, optionally powering it down. - */ -void ssp_disable(struct ssp_dev *dev) -{ - struct ssp_device *ssp = dev->ssp; - uint32_t sscr0; - - sscr0 = __raw_readl(ssp->mmio_base + SSCR0); - sscr0 &= ~SSCR0_SSE; - __raw_writel(sscr0, ssp->mmio_base + SSCR0); -} - -/** - * ssp_save_state - save the SSP configuration - * @ssp: pointer to structure to save SSP configuration - * - * Save the configured SSP state for suspend. - */ -void ssp_save_state(struct ssp_dev *dev, struct ssp_state *state) -{ - struct ssp_device *ssp = dev->ssp; - - state->cr0 = __raw_readl(ssp->mmio_base + SSCR0); - state->cr1 = __raw_readl(ssp->mmio_base + SSCR1); - state->to = __raw_readl(ssp->mmio_base + SSTO); - state->psp = __raw_readl(ssp->mmio_base + SSPSP); - - ssp_disable(dev); -} - -/** - * ssp_restore_state - restore a previously saved SSP configuration - * @ssp: pointer to configuration saved by ssp_save_state - * - * Restore the SSP configuration saved previously by ssp_save_state. - */ -void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *state) -{ - struct ssp_device *ssp = dev->ssp; - uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE; - - __raw_writel(sssr, ssp->mmio_base + SSSR); - - __raw_writel(state->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0); - __raw_writel(state->cr1, ssp->mmio_base + SSCR1); - __raw_writel(state->to, ssp->mmio_base + SSTO); - __raw_writel(state->psp, ssp->mmio_base + SSPSP); - __raw_writel(state->cr0, ssp->mmio_base + SSCR0); -} - -/** - * ssp_config - configure SSP port settings - * @mode: port operating mode - * @flags: port config flags - * @psp_flags: port PSP config flags - * @speed: port speed - * - * Port MUST be disabled by ssp_disable before making any config changes. - */ -int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed) -{ - struct ssp_device *ssp = dev->ssp; - - dev->mode = mode; - dev->flags = flags; - dev->psp_flags = psp_flags; - dev->speed = speed; - - /* set up port type, speed, port settings */ - __raw_writel((dev->speed | dev->mode), ssp->mmio_base + SSCR0); - __raw_writel(dev->flags, ssp->mmio_base + SSCR1); - __raw_writel(dev->psp_flags, ssp->mmio_base + SSPSP); - - return 0; -} - -/** - * ssp_init - setup the SSP port - * - * initialise and claim resources for the SSP port. - * - * Returns: - * %-ENODEV if the SSP port is unavailable - * %-EBUSY if the resources are already in use - * %0 on success - */ -int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags) -{ - struct ssp_device *ssp; - int ret; - - ssp = ssp_request(port, "SSP"); - if (ssp == NULL) - return -ENODEV; - - dev->ssp = ssp; - dev->port = port; - - /* do we need to get irq */ - if (!(init_flags & SSP_NO_IRQ)) { - ret = request_irq(ssp->irq, ssp_interrupt, - 0, "SSP", dev); - if (ret) - goto out_region; - dev->irq = ssp->irq; - } else - dev->irq = NO_IRQ; - - /* turn on SSP port clock */ - clk_enable(ssp->clk); - return 0; - -out_region: - ssp_free(ssp); - return ret; -} - -/** - * ssp_exit - undo the effects of ssp_init - * - * release and free resources for the SSP port. - */ -void ssp_exit(struct ssp_dev *dev) -{ - struct ssp_device *ssp = dev->ssp; - - ssp_disable(dev); - if (dev->irq != NO_IRQ) - free_irq(dev->irq, dev); - clk_disable(ssp->clk); - ssp_free(ssp); -} -#endif /* CONFIG_PXA_SSP_LEGACY */ - -static DEFINE_MUTEX(ssp_lock); -static LIST_HEAD(ssp_list); - -struct ssp_device *ssp_request(int port, const char *label) -{ - struct ssp_device *ssp = NULL; - - mutex_lock(&ssp_lock); - - list_for_each_entry(ssp, &ssp_list, node) { - if (ssp->port_id == port && ssp->use_count == 0) { - ssp->use_count++; - ssp->label = label; - break; - } - } - - mutex_unlock(&ssp_lock); - - if (&ssp->node == &ssp_list) - return NULL; - - return ssp; -} -EXPORT_SYMBOL(ssp_request); - -void ssp_free(struct ssp_device *ssp) -{ - mutex_lock(&ssp_lock); - if (ssp->use_count) { - ssp->use_count--; - ssp->label = NULL; - } else - dev_err(&ssp->pdev->dev, "device already free\n"); - mutex_unlock(&ssp_lock); -} -EXPORT_SYMBOL(ssp_free); - -static int __devinit ssp_probe(struct platform_device *pdev) -{ - const struct platform_device_id *id = platform_get_device_id(pdev); - struct resource *res; - struct ssp_device *ssp; - int ret = 0; - - ssp = kzalloc(sizeof(struct ssp_device), GFP_KERNEL); - if (ssp == NULL) { - dev_err(&pdev->dev, "failed to allocate memory"); - return -ENOMEM; - } - ssp->pdev = pdev; - - ssp->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(ssp->clk)) { - ret = PTR_ERR(ssp->clk); - goto err_free; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "no memory resource defined\n"); - ret = -ENODEV; - goto err_free_clk; - } - - res = request_mem_region(res->start, res->end - res->start + 1, - pdev->name); - if (res == NULL) { - dev_err(&pdev->dev, "failed to request memory resource\n"); - ret = -EBUSY; - goto err_free_clk; - } - - ssp->phys_base = res->start; - - ssp->mmio_base = ioremap(res->start, res->end - res->start + 1); - if (ssp->mmio_base == NULL) { - dev_err(&pdev->dev, "failed to ioremap() registers\n"); - ret = -ENODEV; - goto err_free_mem; - } - - ssp->irq = platform_get_irq(pdev, 0); - if (ssp->irq < 0) { - dev_err(&pdev->dev, "no IRQ resource defined\n"); - ret = -ENODEV; - goto err_free_io; - } - - res = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (res == NULL) { - dev_err(&pdev->dev, "no SSP RX DRCMR defined\n"); - ret = -ENODEV; - goto err_free_io; - } - ssp->drcmr_rx = res->start; - - res = platform_get_resource(pdev, IORESOURCE_DMA, 1); - if (res == NULL) { - dev_err(&pdev->dev, "no SSP TX DRCMR defined\n"); - ret = -ENODEV; - goto err_free_io; - } - ssp->drcmr_tx = res->start; - - /* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id - * starts from 0, do a translation here - */ - ssp->port_id = pdev->id + 1; - ssp->use_count = 0; - ssp->type = (int)id->driver_data; - - mutex_lock(&ssp_lock); - list_add(&ssp->node, &ssp_list); - mutex_unlock(&ssp_lock); - - platform_set_drvdata(pdev, ssp); - return 0; - -err_free_io: - iounmap(ssp->mmio_base); -err_free_mem: - release_mem_region(res->start, res->end - res->start + 1); -err_free_clk: - clk_put(ssp->clk); -err_free: - kfree(ssp); - return ret; -} - -static int __devexit ssp_remove(struct platform_device *pdev) -{ - struct resource *res; - struct ssp_device *ssp; - - ssp = platform_get_drvdata(pdev); - if (ssp == NULL) - return -ENODEV; - - iounmap(ssp->mmio_base); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, res->end - res->start + 1); - - clk_put(ssp->clk); - - mutex_lock(&ssp_lock); - list_del(&ssp->node); - mutex_unlock(&ssp_lock); - - kfree(ssp); - return 0; -} - -static const struct platform_device_id ssp_id_table[] = { - { "pxa25x-ssp", PXA25x_SSP }, - { "pxa25x-nssp", PXA25x_NSSP }, - { "pxa27x-ssp", PXA27x_SSP }, - { }, -}; - -static struct platform_driver ssp_driver = { - .probe = ssp_probe, - .remove = __devexit_p(ssp_remove), - .driver = { - .owner = THIS_MODULE, - .name = "pxa2xx-ssp", - }, - .id_table = ssp_id_table, -}; - -static int __init pxa_ssp_init(void) -{ - return platform_driver_register(&ssp_driver); -} - -static void __exit pxa_ssp_exit(void) -{ - platform_driver_unregister(&ssp_driver); -} - -arch_initcall(pxa_ssp_init); -module_exit(pxa_ssp_exit); - -#ifdef CONFIG_PXA_SSP_LEGACY -EXPORT_SYMBOL(ssp_write_word); -EXPORT_SYMBOL(ssp_read_word); -EXPORT_SYMBOL(ssp_flush); -EXPORT_SYMBOL(ssp_enable); -EXPORT_SYMBOL(ssp_disable); -EXPORT_SYMBOL(ssp_save_state); -EXPORT_SYMBOL(ssp_restore_state); -EXPORT_SYMBOL(ssp_init); -EXPORT_SYMBOL(ssp_exit); -EXPORT_SYMBOL(ssp_config); -#endif - -MODULE_DESCRIPTION("PXA SSP driver"); -MODULE_AUTHOR("Liam Girdwood"); -MODULE_LICENSE("GPL"); - diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 2041eb1d90b..af40d2a12d3 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -464,8 +464,6 @@ static struct platform_device smc91x_device = { -static struct pxamci_platform_data stargate2_mci_platform_data; - /* * The card detect interrupt isn't debounced so we delay it by 250ms * to give the card a chance to fully insert / eject. @@ -489,8 +487,6 @@ static int stargate2_mci_init(struct device *dev, goto free_power_en; } gpio_direction_input(SG2_GPIO_nSD_DETECT); - /* Delay to allow for full insertion */ - stargate2_mci_platform_data.detect_delay = msecs_to_jiffies(250); err = request_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), stargate2_detect_int, @@ -529,6 +525,7 @@ static void stargate2_mci_exit(struct device *dev, void *data) } static struct pxamci_platform_data stargate2_mci_platform_data = { + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .init = stargate2_mci_init, .setpower = stargate2_mci_setpower, diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index ad552791c4c..7512b822c6c 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -275,6 +275,7 @@ static void tosa_mci_exit(struct device *dev, void *data) } static struct pxamci_platform_data tosa_mci_platform_data = { + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .init = tosa_mci_init, .exit = tosa_mci_exit, @@ -926,7 +927,6 @@ static void __init tosa_init(void) dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12); dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16); - tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250); pxa_set_mci_info(&tosa_mci_platform_data); pxa_set_udc_info(&udc_info); pxa_set_ficp_info(&tosa_ficp_platform_data); diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 797f2544d0c..69689112eae 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -349,7 +349,7 @@ static void trizeps4_mci_exit(struct device *dev, void *data) static struct pxamci_platform_data trizeps4_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .detect_delay = 1, + .detect_delay_ms= 10, .init = trizeps4_mci_init, .exit = trizeps4_mci_exit, .get_ro = NULL, /* write-protection not supported */ diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 9e0c5c3988a..e90114a7e24 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -34,6 +34,7 @@ #include <linux/pm.h> #include <linux/sched.h> #include <linux/gpio.h> +#include <linux/jiffies.h> #include <linux/i2c-gpio.h> #include <linux/serial_8250.h> #include <linux/smc91x.h> @@ -454,7 +455,7 @@ static struct i2c_gpio_platform_data i2c_bus_data = { .sda_pin = VIPER_RTC_I2C_SDA_GPIO, .scl_pin = VIPER_RTC_I2C_SCL_GPIO, .udelay = 10, - .timeout = 100, + .timeout = HZ, }; static struct platform_device i2c_bus_device = { @@ -779,7 +780,7 @@ static void __init viper_tpm_init(void) .sda_pin = VIPER_TPM_I2C_SDA_GPIO, .scl_pin = VIPER_TPM_I2C_SCL_GPIO, .udelay = 10, - .timeout = 100, + .timeout = HZ, }; char *errstr; diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c new file mode 100644 index 00000000000..9884fa978f1 --- /dev/null +++ b/arch/arm/mach-pxa/vpac270.c @@ -0,0 +1,615 @@ +/* + * Hardware definitions for Voipac PXA270 + * + * Copyright (C) 2010 + * Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/gpio.h> +#include <linux/sysdev.h> +#include <linux/usb/gpio_vbus.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/onenand.h> +#include <linux/dm9000.h> +#include <linux/ucb1400.h> +#include <linux/ata_platform.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/pxa27x.h> +#include <mach/audio.h> +#include <mach/vpac270.h> +#include <mach/mmc.h> +#include <mach/pxafb.h> +#include <mach/ohci.h> +#include <mach/pxa27x-udc.h> +#include <mach/udc.h> + +#include <plat/i2c.h> + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static unsigned long vpac270_pin_config[] __initdata = { + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + GPIO53_GPIO, /* SD detect */ + GPIO52_GPIO, /* SD r/o switch */ + + /* GPIO KEYS */ + GPIO1_GPIO, /* USER BTN */ + + /* LEDs */ + GPIO15_GPIO, /* orange led */ + + /* FFUART */ + GPIO34_FFUART_RXD, + GPIO39_FFUART_TXD, + GPIO27_FFUART_RTS, + GPIO100_FFUART_CTS, + GPIO33_FFUART_DSR, + GPIO40_FFUART_DTR, + GPIO10_FFUART_DCD, + GPIO38_FFUART_RI, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO86_LCD_LDD_16, + GPIO87_LCD_LDD_17, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* PCMCIA */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO85_nPCE_1, + GPIO54_nPCE_2, + GPIO55_nPREG, + GPIO57_nIOIS16, + GPIO56_nPWAIT, + GPIO104_PSKTSEL, + GPIO84_GPIO, /* PCMCIA CD */ + GPIO35_GPIO, /* PCMCIA RDY */ + GPIO107_GPIO, /* PCMCIA PPEN */ + GPIO11_GPIO, /* PCMCIA RESET */ + GPIO17_GPIO, /* CF CD */ + GPIO12_GPIO, /* CF RDY */ + GPIO16_GPIO, /* CF RESET */ + + /* UHC */ + GPIO88_USBH1_PWR, + GPIO89_USBH1_PEN, + GPIO119_USBH2_PWR, + GPIO120_USBH2_PEN, + + /* UDC */ + GPIO41_GPIO, + + /* Ethernet */ + GPIO114_GPIO, /* IRQ */ + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + GPIO95_AC97_nRESET, + GPIO98_AC97_SYSCLK, + GPIO113_GPIO, /* TS IRQ */ + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, + + /* IDE */ + GPIO36_GPIO, /* IDE IRQ */ + GPIO80_DREQ_1, +}; + +/****************************************************************************** + * NOR Flash + ******************************************************************************/ +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static struct mtd_partition vpac270_nor_partitions[] = { + { + .name = "Flash", + .offset = 0x00000000, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct physmap_flash_data vpac270_flash_data[] = { + { + .width = 2, /* bankwidth in bytes */ + .parts = vpac270_nor_partitions, + .nr_parts = ARRAY_SIZE(vpac270_nor_partitions) + } +}; + +static struct resource vpac270_flash_resource = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device vpac270_flash = { + .name = "physmap-flash", + .id = 0, + .resource = &vpac270_flash_resource, + .num_resources = 1, + .dev = { + .platform_data = vpac270_flash_data, + }, +}; +static void __init vpac270_nor_init(void) +{ + platform_device_register(&vpac270_flash); +} +#else +static inline void vpac270_nor_init(void) {} +#endif + +/****************************************************************************** + * OneNAND Flash + ******************************************************************************/ +#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE) +static struct mtd_partition vpac270_onenand_partitions[] = { + { + .name = "Flash", + .offset = 0x00000000, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct onenand_platform_data vpac270_onenand_info = { + .parts = vpac270_onenand_partitions, + .nr_parts = ARRAY_SIZE(vpac270_onenand_partitions), +}; + +static struct resource vpac270_onenand_resources[] = { + [0] = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_1M, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device vpac270_onenand = { + .name = "onenand-flash", + .id = -1, + .resource = vpac270_onenand_resources, + .num_resources = ARRAY_SIZE(vpac270_onenand_resources), + .dev = { + .platform_data = &vpac270_onenand_info, + }, +}; + +static void __init vpac270_onenand_init(void) +{ + platform_device_register(&vpac270_onenand); +} +#else +static void __init vpac270_onenand_init(void) {} +#endif + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +static struct pxamci_platform_data vpac270_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .gpio_card_detect = GPIO53_VPAC270_SD_DETECT_N, + .gpio_card_ro = GPIO52_VPAC270_SD_READONLY, + .detect_delay_ms = 200, +}; + +static void __init vpac270_mmc_init(void) +{ + pxa_set_mci_info(&vpac270_mci_platform_data); +} +#else +static inline void vpac270_mmc_init(void) {} +#endif + +/****************************************************************************** + * GPIO keys + ******************************************************************************/ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button vpac270_pxa_buttons[] = { + {KEY_POWER, GPIO1_VPAC270_USER_BTN, 0, "USER BTN"}, +}; + +static struct gpio_keys_platform_data vpac270_pxa_keys_data = { + .buttons = vpac270_pxa_buttons, + .nbuttons = ARRAY_SIZE(vpac270_pxa_buttons), +}; + +static struct platform_device vpac270_pxa_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &vpac270_pxa_keys_data, + }, +}; + +static void __init vpac270_keys_init(void) +{ + platform_device_register(&vpac270_pxa_keys); +} +#else +static inline void vpac270_keys_init(void) {} +#endif + +/****************************************************************************** + * LED + ******************************************************************************/ +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +struct gpio_led vpac270_gpio_leds[] = { +{ + .name = "vpac270:orange:user", + .default_trigger = "none", + .gpio = GPIO15_VPAC270_LED_ORANGE, + .active_low = 1, +} +}; + +static struct gpio_led_platform_data vpac270_gpio_led_info = { + .leds = vpac270_gpio_leds, + .num_leds = ARRAY_SIZE(vpac270_gpio_leds), +}; + +static struct platform_device vpac270_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &vpac270_gpio_led_info, + } +}; + +static void __init vpac270_leds_init(void) +{ + platform_device_register(&vpac270_leds); +} +#else +static inline void vpac270_leds_init(void) {} +#endif + +/****************************************************************************** + * USB Host + ******************************************************************************/ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static int vpac270_ohci_init(struct device *dev) +{ + UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE; + return 0; +} + +static struct pxaohci_platform_data vpac270_ohci_info = { + .port_mode = PMM_PERPORT_MODE, + .flags = ENABLE_PORT1 | ENABLE_PORT2 | + POWER_CONTROL_LOW | POWER_SENSE_LOW, + .init = vpac270_ohci_init, +}; + +static void __init vpac270_uhc_init(void) +{ + pxa_set_ohci_info(&vpac270_ohci_info); +} +#else +static inline void vpac270_uhc_init(void) {} +#endif + +/****************************************************************************** + * USB Gadget + ******************************************************************************/ +#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE) +static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = { + .gpio_vbus = GPIO41_VPAC270_UDC_DETECT, + .gpio_pullup = -1, +}; + +static struct platform_device vpac270_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &vpac270_gpio_vbus_info, + }, +}; + +static void vpac270_udc_command(int cmd) +{ + if (cmd == PXA2XX_UDC_CMD_CONNECT) + UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE; + else if (cmd == PXA2XX_UDC_CMD_DISCONNECT) + UP2OCR = UP2OCR_HXOE; +} + +static struct pxa2xx_udc_mach_info vpac270_udc_info __initdata = { + .udc_command = vpac270_udc_command, + .gpio_pullup = -1, +}; + +static void __init vpac270_udc_init(void) +{ + pxa_set_udc_info(&vpac270_udc_info); + platform_device_register(&vpac270_gpio_vbus); +} +#else +static inline void vpac270_udc_init(void) {} +#endif + +/****************************************************************************** + * Ethernet + ******************************************************************************/ +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +static struct resource vpac270_dm9000_resources[] = { + [0] = { + .start = PXA_CS2_PHYS + 0x300, + .end = PXA_CS2_PHYS + 0x303, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PXA_CS2_PHYS + 0x304, + .end = PXA_CS2_PHYS + 0x343, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ), + .end = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, +}; + +static struct dm9000_plat_data vpac270_dm9000_platdata = { + .flags = DM9000_PLATF_32BITONLY, +}; + +static struct platform_device vpac270_dm9000_device = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(vpac270_dm9000_resources), + .resource = vpac270_dm9000_resources, + .dev = { + .platform_data = &vpac270_dm9000_platdata, + } +}; + +static void __init vpac270_eth_init(void) +{ + platform_device_register(&vpac270_dm9000_device); +} +#else +static inline void vpac270_eth_init(void) {} +#endif + +/****************************************************************************** + * Audio and Touchscreen + ******************************************************************************/ +#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \ + defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) +static pxa2xx_audio_ops_t vpac270_ac97_pdata = { + .reset_gpio = 95, +}; + +static struct ucb1400_pdata vpac270_ucb1400_pdata = { + .irq = IRQ_GPIO(GPIO113_VPAC270_TS_IRQ), +}; + +static struct platform_device vpac270_ucb1400_device = { + .name = "ucb1400_core", + .id = -1, + .dev = { + .platform_data = &vpac270_ucb1400_pdata, + }, +}; + +static void __init vpac270_ts_init(void) +{ + pxa_set_ac97_info(&vpac270_ac97_pdata); + platform_device_register(&vpac270_ucb1400_device); +} +#else +static inline void vpac270_ts_init(void) {} +#endif + +/****************************************************************************** + * RTC + ******************************************************************************/ +#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE) +static struct i2c_board_info __initdata vpac270_i2c_devs[] = { + { + I2C_BOARD_INFO("ds1339", 0x68), + }, +}; + +static void __init vpac270_rtc_init(void) +{ + pxa_set_i2c_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs)); +} +#else +static inline void vpac270_rtc_init(void) {} +#endif + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static struct pxafb_mode_info vpac270_lcd_modes[] = { +{ + .pixclock = 57692, + .xres = 640, + .yres = 480, + .bpp = 32, + .depth = 18, + + .left_margin = 144, + .right_margin = 32, + .upper_margin = 13, + .lower_margin = 30, + + .hsync_len = 32, + .vsync_len = 2, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +}, +}; + +static struct pxafb_mach_info vpac270_lcd_screen = { + .modes = vpac270_lcd_modes, + .num_modes = ARRAY_SIZE(vpac270_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_18BPP, +}; + +static void vpac270_lcd_power(int on, struct fb_var_screeninfo *info) +{ + gpio_set_value(GPIO81_VPAC270_BKL_ON, on); +} + +static void __init vpac270_lcd_init(void) +{ + int ret; + + ret = gpio_request(GPIO81_VPAC270_BKL_ON, "BKL-ON"); + if (ret) { + pr_err("Requesting BKL-ON GPIO failed!\n"); + goto err; + } + + ret = gpio_direction_output(GPIO81_VPAC270_BKL_ON, 1); + if (ret) { + pr_err("Setting BKL-ON GPIO direction failed!\n"); + goto err2; + } + + vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power; + set_pxa_fb_info(&vpac270_lcd_screen); + return; + +err2: + gpio_free(GPIO81_VPAC270_BKL_ON); +err: + return; +} +#else +static inline void vpac270_lcd_init(void) {} +#endif + +/****************************************************************************** + * PATA IDE + ******************************************************************************/ +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +static struct pata_platform_info vpac270_pata_pdata = { + .ioport_shift = 1, + .irq_flags = IRQF_TRIGGER_RISING, +}; + +static struct resource vpac270_ide_resources[] = { + [0] = { /* I/O Base address */ + .start = PXA_CS3_PHYS + 0x120, + .end = PXA_CS3_PHYS + 0x13f, + .flags = IORESOURCE_MEM + }, + [1] = { /* CTL Base address */ + .start = PXA_CS3_PHYS + 0x15c, + .end = PXA_CS3_PHYS + 0x15f, + .flags = IORESOURCE_MEM + }, + [2] = { /* IDE IRQ pin */ + .start = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ), + .end = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ), + .flags = IORESOURCE_IRQ + } +}; + +static struct platform_device vpac270_ide_device = { + .name = "pata_platform", + .num_resources = ARRAY_SIZE(vpac270_ide_resources), + .resource = vpac270_ide_resources, + .dev = { + .platform_data = &vpac270_pata_pdata, + } +}; + +static void __init vpac270_ide_init(void) +{ + platform_device_register(&vpac270_ide_device); +} +#else +static inline void vpac270_ide_init(void) {} +#endif + +/****************************************************************************** + * Machine init + ******************************************************************************/ +static void __init vpac270_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(vpac270_pin_config)); + + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + + vpac270_lcd_init(); + vpac270_mmc_init(); + vpac270_nor_init(); + vpac270_onenand_init(); + vpac270_leds_init(); + vpac270_keys_init(); + vpac270_uhc_init(); + vpac270_udc_init(); + vpac270_eth_init(); + vpac270_ts_init(); + vpac270_rtc_init(); + vpac270_ide_init(); +} + +MACHINE_START(VPAC270, "Voipac PXA270") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = vpac270_init +MACHINE_END diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c new file mode 100644 index 00000000000..f5d1ae3db3a --- /dev/null +++ b/arch/arm/mach-pxa/z2.c @@ -0,0 +1,609 @@ +/* + * linux/arch/arm/mach-pxa/z2.c + * + * Support for the Zipit Z2 Handheld device. + * + * Author: Ken McGuire + * Created: Jan 25, 2009 + * Based on mainstone.c as modified for the Zipit Z2. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/pwm_backlight.h> +#include <linux/dma-mapping.h> +#include <linux/spi/spi.h> +#include <linux/spi/libertas_spi.h> +#include <linux/spi/lms283gf05.h> +#include <linux/power_supply.h> +#include <linux/mtd/physmap.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/delay.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/pxa27x.h> +#include <mach/mfp-pxa27x.h> +#include <mach/z2.h> +#include <mach/pxafb.h> +#include <mach/mmc.h> +#include <mach/pxa27x_keypad.h> +#include <mach/pxa2xx_spi.h> + +#include <plat/i2c.h> + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static unsigned long z2_pin_config[] = { + + /* LCD - 16bpp Active TFT */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + GPIO19_GPIO, /* LCD reset */ + GPIO88_GPIO, /* LCD chipselect */ + + /* PWM */ + GPIO115_PWM1_OUT, /* Keypad Backlight */ + GPIO11_PWM2_OUT, /* LCD Backlight */ + + /* MMC */ + GPIO32_MMC_CLK, + GPIO112_MMC_CMD, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO96_GPIO, /* SD detect */ + + /* STUART */ + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, + + /* Keypad */ + GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, + GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, + GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, + GPIO38_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH, + GPIO16_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH, + GPIO17_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH, + GPIO103_KP_MKOUT_0, + GPIO104_KP_MKOUT_1, + GPIO105_KP_MKOUT_2, + GPIO106_KP_MKOUT_3, + GPIO107_KP_MKOUT_4, + GPIO108_KP_MKOUT_5, + GPIO35_KP_MKOUT_6, + GPIO41_KP_MKOUT_7, + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, + + /* SSP1 */ + GPIO23_SSP1_SCLK, /* SSP1_SCK */ + GPIO25_SSP1_TXD, /* SSP1_TXD */ + GPIO26_SSP1_RXD, /* SSP1_RXD */ + + /* SSP2 */ + GPIO22_SSP2_SCLK, /* SSP2_SCK */ + GPIO13_SSP2_TXD, /* SSP2_TXD */ + GPIO40_SSP2_RXD, /* SSP2_RXD */ + + /* LEDs */ + GPIO10_GPIO, /* WiFi LED */ + GPIO83_GPIO, /* Charging LED */ + GPIO85_GPIO, /* Charged LED */ + + /* I2S */ + GPIO28_I2S_BITCLK_OUT, + GPIO29_I2S_SDATA_IN, + GPIO30_I2S_SDATA_OUT, + GPIO31_I2S_SYNC, + GPIO113_I2S_SYSCLK, + + /* MISC */ + GPIO0_GPIO, /* AC power detect */ + GPIO1_GPIO, /* Power button */ + GPIO37_GPIO, /* Headphone detect */ + GPIO98_GPIO, /* Lid switch */ + GPIO14_GPIO, /* WiFi Reset */ + GPIO15_GPIO, /* WiFi Power */ + GPIO24_GPIO, /* WiFi CS */ + GPIO36_GPIO, /* WiFi IRQ */ + GPIO88_GPIO, /* LCD CS */ +}; + +/****************************************************************************** + * NOR Flash + ******************************************************************************/ +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static struct resource z2_flash_resource = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_8M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct mtd_partition z2_flash_parts[] = { + { + .name = "U-Boot Bootloader", + .offset = 0x0, + .size = 0x20000, + }, + { + .name = "Linux Kernel", + .offset = 0x20000, + .size = 0x220000, + }, + { + .name = "Filesystem", + .offset = 0x240000, + .size = 0x5b0000, + }, + { + .name = "U-Boot Environment", + .offset = 0x7f0000, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data z2_flash_data = { + .width = 2, + .parts = z2_flash_parts, + .nr_parts = ARRAY_SIZE(z2_flash_parts), +}; + +static struct platform_device z2_flash = { + .name = "physmap-flash", + .id = -1, + .resource = &z2_flash_resource, + .num_resources = 1, + .dev = { + .platform_data = &z2_flash_data, + }, +}; + +static void __init z2_nor_init(void) +{ + platform_device_register(&z2_flash); +} +#else +static inline void z2_nor_init(void) {} +#endif + +/****************************************************************************** + * Backlight + ******************************************************************************/ +#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +static struct platform_pwm_backlight_data z2_backlight_data[] = { + [0] = { + /* Keypad Backlight */ + .pwm_id = 1, + .max_brightness = 1023, + .dft_brightness = 512, + .pwm_period_ns = 1260320, + }, + [1] = { + /* LCD Backlight */ + .pwm_id = 2, + .max_brightness = 1023, + .dft_brightness = 512, + .pwm_period_ns = 1260320, + }, +}; + +static struct platform_device z2_backlight_devices[2] = { + { + .name = "pwm-backlight", + .id = 0, + .dev = { + .platform_data = &z2_backlight_data[1], + }, + }, + { + .name = "pwm-backlight", + .id = 1, + .dev = { + .platform_data = &z2_backlight_data[0], + }, + }, +}; +static void __init z2_pwm_init(void) +{ + platform_device_register(&z2_backlight_devices[0]); + platform_device_register(&z2_backlight_devices[1]); +} +#else +static inline void z2_pwm_init(void) {} +#endif + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static struct pxafb_mode_info z2_lcd_modes[] = { +{ + .pixclock = 192000, + .xres = 240, + .yres = 320, + .bpp = 16, + + .left_margin = 4, + .right_margin = 8, + .upper_margin = 4, + .lower_margin = 8, + + .hsync_len = 4, + .vsync_len = 4, +}, +}; + +static struct pxafb_mach_info z2_lcd_screen = { + .modes = z2_lcd_modes, + .num_modes = ARRAY_SIZE(z2_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_BIAS_ACTIVE_LOW | + LCD_ALTERNATE_MAPPING, +}; + +static void __init z2_lcd_init(void) +{ + set_pxa_fb_info(&z2_lcd_screen); +} +#else +static inline void z2_lcd_init(void) {} +#endif + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +static struct pxamci_platform_data z2_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .gpio_card_detect = GPIO96_ZIPITZ2_SD_DETECT, + .gpio_power = -1, + .gpio_card_ro = -1, + .detect_delay_ms = 200, +}; + +static void __init z2_mmc_init(void) +{ + pxa_set_mci_info(&z2_mci_platform_data); +} +#else +static inline void z2_mmc_init(void) {} +#endif + +/****************************************************************************** + * LEDs + ******************************************************************************/ +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +struct gpio_led z2_gpio_leds[] = { +{ + .name = "z2:green:wifi", + .default_trigger = "none", + .gpio = GPIO10_ZIPITZ2_LED_WIFI, + .active_low = 1, +}, { + .name = "z2:green:charged", + .default_trigger = "none", + .gpio = GPIO85_ZIPITZ2_LED_CHARGED, + .active_low = 1, +}, { + .name = "z2:amber:charging", + .default_trigger = "none", + .gpio = GPIO83_ZIPITZ2_LED_CHARGING, + .active_low = 1, +}, +}; + +static struct gpio_led_platform_data z2_gpio_led_info = { + .leds = z2_gpio_leds, + .num_leds = ARRAY_SIZE(z2_gpio_leds), +}; + +static struct platform_device z2_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &z2_gpio_led_info, + } +}; + +static void __init z2_leds_init(void) +{ + platform_device_register(&z2_leds); +} +#else +static inline void z2_leds_init(void) {} +#endif + +/****************************************************************************** + * GPIO keyboard + ******************************************************************************/ +#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) +static unsigned int z2_matrix_keys[] = { + KEY(0, 0, KEY_OPTION), + KEY(1, 0, KEY_UP), + KEY(2, 0, KEY_DOWN), + KEY(3, 0, KEY_LEFT), + KEY(4, 0, KEY_RIGHT), + KEY(5, 0, KEY_END), + KEY(6, 0, KEY_KPPLUS), + + KEY(0, 1, KEY_HOME), + KEY(1, 1, KEY_Q), + KEY(2, 1, KEY_I), + KEY(3, 1, KEY_G), + KEY(4, 1, KEY_X), + KEY(5, 1, KEY_ENTER), + KEY(6, 1, KEY_KPMINUS), + + KEY(0, 2, KEY_PAGEUP), + KEY(1, 2, KEY_W), + KEY(2, 2, KEY_O), + KEY(3, 2, KEY_H), + KEY(4, 2, KEY_C), + KEY(5, 2, KEY_LEFTALT), + + KEY(0, 3, KEY_PAGEDOWN), + KEY(1, 3, KEY_E), + KEY(2, 3, KEY_P), + KEY(3, 3, KEY_J), + KEY(4, 3, KEY_V), + KEY(5, 3, KEY_LEFTSHIFT), + + KEY(0, 4, KEY_ESC), + KEY(1, 4, KEY_R), + KEY(2, 4, KEY_A), + KEY(3, 4, KEY_K), + KEY(4, 4, KEY_B), + KEY(5, 4, KEY_LEFTCTRL), + + KEY(0, 5, KEY_TAB), + KEY(1, 5, KEY_T), + KEY(2, 5, KEY_S), + KEY(3, 5, KEY_L), + KEY(4, 5, KEY_N), + KEY(5, 5, KEY_SPACE), + + KEY(0, 6, KEY_STOPCD), + KEY(1, 6, KEY_Y), + KEY(2, 6, KEY_D), + KEY(3, 6, KEY_BACKSPACE), + KEY(4, 6, KEY_M), + KEY(5, 6, KEY_COMMA), + + KEY(0, 7, KEY_PLAYCD), + KEY(1, 7, KEY_U), + KEY(2, 7, KEY_F), + KEY(3, 7, KEY_Z), + KEY(4, 7, KEY_SEMICOLON), + KEY(5, 7, KEY_DOT), +}; + +static struct pxa27x_keypad_platform_data z2_keypad_platform_data = { + .matrix_key_rows = 7, + .matrix_key_cols = 8, + .matrix_key_map = z2_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(z2_matrix_keys), + + .debounce_interval = 30, +}; + +static void __init z2_mkp_init(void) +{ + pxa_set_keypad_info(&z2_keypad_platform_data); +} +#else +static inline void z2_mkp_init(void) {} +#endif + +/****************************************************************************** + * GPIO keys + ******************************************************************************/ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button z2_pxa_buttons[] = { + {KEY_POWER, GPIO1_ZIPITZ2_POWER_BUTTON, 0, "Power Button" }, + {KEY_CLOSE, GPIO98_ZIPITZ2_LID_BUTTON, 0, "Lid Button" }, +}; + +static struct gpio_keys_platform_data z2_pxa_keys_data = { + .buttons = z2_pxa_buttons, + .nbuttons = ARRAY_SIZE(z2_pxa_buttons), +}; + +static struct platform_device z2_pxa_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &z2_pxa_keys_data, + }, +}; + +static void __init z2_keys_init(void) +{ + platform_device_register(&z2_pxa_keys); +} +#else +static inline void z2_keys_init(void) {} +#endif + +/****************************************************************************** + * SSP Devices - WiFi and LCD control + ******************************************************************************/ +#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) +/* WiFi */ +static int z2_lbs_spi_setup(struct spi_device *spi) +{ + int ret = 0; + + ret = gpio_request(GPIO15_ZIPITZ2_WIFI_POWER, "WiFi Power"); + if (ret) + goto err; + + ret = gpio_direction_output(GPIO15_ZIPITZ2_WIFI_POWER, 1); + if (ret) + goto err2; + + ret = gpio_request(GPIO14_ZIPITZ2_WIFI_RESET, "WiFi Reset"); + if (ret) + goto err2; + + ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_RESET, 0); + if (ret) + goto err3; + + /* Reset the card */ + mdelay(180); + gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 1); + mdelay(20); + + spi->bits_per_word = 16; + spi->mode = SPI_MODE_2, + + spi_setup(spi); + + return 0; + +err3: + gpio_free(GPIO14_ZIPITZ2_WIFI_RESET); +err2: + gpio_free(GPIO15_ZIPITZ2_WIFI_POWER); +err: + return ret; +}; + +static int z2_lbs_spi_teardown(struct spi_device *spi) +{ + gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 0); + gpio_set_value(GPIO15_ZIPITZ2_WIFI_POWER, 0); + gpio_free(GPIO14_ZIPITZ2_WIFI_RESET); + gpio_free(GPIO15_ZIPITZ2_WIFI_POWER); + return 0; + +}; + +static struct pxa2xx_spi_chip z2_lbs_chip_info = { + .rx_threshold = 8, + .tx_threshold = 8, + .timeout = 1000, + .gpio_cs = GPIO24_ZIPITZ2_WIFI_CS, +}; + +static struct libertas_spi_platform_data z2_lbs_pdata = { + .use_dummy_writes = 1, + .setup = z2_lbs_spi_setup, + .teardown = z2_lbs_spi_teardown, +}; + +/* LCD */ +static struct pxa2xx_spi_chip lms283_chip_info = { + .rx_threshold = 1, + .tx_threshold = 1, + .timeout = 64, + .gpio_cs = GPIO88_ZIPITZ2_LCD_CS, +}; + +static const struct lms283gf05_pdata lms283_pdata = { + .reset_gpio = GPIO19_ZIPITZ2_LCD_RESET, +}; + +static struct spi_board_info spi_board_info[] __initdata = { +{ + .modalias = "libertas_spi", + .platform_data = &z2_lbs_pdata, + .controller_data = &z2_lbs_chip_info, + .irq = gpio_to_irq(GPIO36_ZIPITZ2_WIFI_IRQ), + .max_speed_hz = 13000000, + .bus_num = 1, + .chip_select = 0, +}, +{ + .modalias = "lms283gf05", + .controller_data = &lms283_chip_info, + .platform_data = &lms283_pdata, + .max_speed_hz = 400000, + .bus_num = 2, + .chip_select = 0, +}, +}; + +static struct pxa2xx_spi_master pxa_ssp1_master_info = { + .clock_enable = CKEN_SSP, + .num_chipselect = 1, + .enable_dma = 1, +}; + +static struct pxa2xx_spi_master pxa_ssp2_master_info = { + .clock_enable = CKEN_SSP2, + .num_chipselect = 1, +}; + +static void __init z2_spi_init(void) +{ + pxa2xx_set_spi_info(1, &pxa_ssp1_master_info); + pxa2xx_set_spi_info(2, &pxa_ssp2_master_info); + spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); +} +#else +static inline void z2_spi_init(void) {} +#endif + +/****************************************************************************** + * Machine init + ******************************************************************************/ +static void __init z2_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(z2_pin_config)); + + z2_lcd_init(); + z2_mmc_init(); + z2_mkp_init(); + + pxa_set_i2c_info(NULL); + + z2_spi_init(); + z2_nor_init(); + z2_pwm_init(); + z2_leds_init(); + z2_keys_init(); +} + +MACHINE_START(ZIPIT2, "Zipit Z2") + .phys_io = 0x40000000, + .boot_params = 0xa0000100, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = z2_init, +MACHINE_END diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 39896d88358..3680f6a9062 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -644,7 +644,7 @@ static struct pxafb_mach_info zeus_fb_info = { static struct pxamci_platform_data zeus_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .detect_delay = HZ/4, + .detect_delay_ms = 250, .gpio_card_detect = ZEUS_MMC_CD_GPIO, .gpio_card_ro = ZEUS_MMC_WP_GPIO, .gpio_card_ro_invert = 1, diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 2b4043c04d0..c479cbecf78 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -218,7 +218,7 @@ static inline void zylonite_init_lcd(void) {} #if defined(CONFIG_MMC) static struct pxamci_platform_data zylonite_mci_platform_data = { - .detect_delay = 20, + .detect_delay_ms= 200, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .gpio_card_detect = EXT_GPIO(0), .gpio_card_ro = EXT_GPIO(2), @@ -226,7 +226,7 @@ static struct pxamci_platform_data zylonite_mci_platform_data = { }; static struct pxamci_platform_data zylonite_mci2_platform_data = { - .detect_delay = 20, + .detect_delay_ms= 200, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .gpio_card_detect = EXT_GPIO(1), .gpio_card_ro = EXT_GPIO(3), @@ -234,7 +234,7 @@ static struct pxamci_platform_data zylonite_mci2_platform_data = { }; static struct pxamci_platform_data zylonite_mci3_platform_data = { - .detect_delay = 20, + .detect_delay_ms= 200, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .gpio_card_detect = EXT_GPIO(30), .gpio_card_ro = EXT_GPIO(31), diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index b17d52f7cc4..fd4c52b7ccb 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -57,7 +57,7 @@ config SA1100_COLLIE config SA1100_H3100 bool "Compaq iPAQ H3100" select HTC_EGPIO - select CPU_FREQ_SA1100 + select CPU_FREQ_SA1110 help Say Y here if you intend to run this kernel on the Compaq iPAQ H3100 handheld computer. Information about this machine and the @@ -68,7 +68,7 @@ config SA1100_H3100 config SA1100_H3600 bool "Compaq iPAQ H3600/H3700" select HTC_EGPIO - select CPU_FREQ_SA1100 + select CPU_FREQ_SA1110 help Say Y here if you intend to run this kernel on the Compaq iPAQ H3600 handheld computer. Information about this machine and the diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c index 63b32b68b29..7252874d328 100644 --- a/arch/arm/mach-sa1100/cpu-sa1110.c +++ b/arch/arm/mach-sa1100/cpu-sa1110.c @@ -363,6 +363,9 @@ static int __init sa1110_clk_init(void) struct sdram_params *sdram; const char *name = sdram_name; + if (!cpu_is_sa1110()) + return -ENODEV; + if (!name[0]) { if (machine_is_assabet()) name = "TC59SM716-CL3"; diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 5bd7c89a604..3e62aae2225 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -572,6 +572,8 @@ config CPU_TLB_V6 config CPU_TLB_V7 bool +config VERIFY_PERMISSION_FAULT + bool endif config CPU_HAS_ASID @@ -769,7 +771,7 @@ config CACHE_L2X0 config CACHE_TAUROS2 bool "Enable the Tauros2 L2 cache controller" - depends on ARCH_DOVE + depends on (ARCH_DOVE || ARCH_MMP) default y select OUTER_CACHE help diff --git a/arch/arm/mm/abort-ev7.S b/arch/arm/mm/abort-ev7.S index 2e6dc040c65..ec88b157d3b 100644 --- a/arch/arm/mm/abort-ev7.S +++ b/arch/arm/mm/abort-ev7.S @@ -29,5 +29,26 @@ ENTRY(v7_early_abort) * V6 code adjusts the returned DFSR. * New designs should not need to patch up faults. */ + +#if defined(CONFIG_VERIFY_PERMISSION_FAULT) + /* + * Detect erroneous permission failures and fix + */ + ldr r3, =0x40d @ On permission fault + and r3, r1, r3 + cmp r3, #0x0d + movne pc, lr + + mcr p15, 0, r0, c7, c8, 0 @ Retranslate FAR + isb + mrc p15, 0, r2, c7, c4, 0 @ Read the PAR + and r3, r2, #0x7b @ On translation fault + cmp r3, #0x0b + movne pc, lr + bic r1, r1, #0xf @ Fix up FSR FS[5:0] + and r2, r2, #0x7e + orr r1, r1, r2, LSR #1 +#endif + mov pc, lr ENDPROC(v7_early_abort) diff --git a/arch/arm/mm/copypage-fa.c b/arch/arm/mm/copypage-fa.c index b2a6008b011..d2852e1635b 100644 --- a/arch/arm/mm/copypage-fa.c +++ b/arch/arm/mm/copypage-fa.c @@ -40,7 +40,7 @@ fa_copy_user_page(void *kto, const void *kfrom) } void fa_copy_user_highpage(struct page *to, struct page *from, - unsigned long vaddr) + unsigned long vaddr, struct vm_area_struct *vma) { void *kto, *kfrom; diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 83db12a68d5..0ed29bfeba1 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -86,9 +86,6 @@ void show_mem(void) printk("Mem-info:\n"); show_free_areas(); for_each_online_node(node) { - pg_data_t *n = NODE_DATA(node); - struct page *map = pgdat_page_nr(n, 0) - n->node_start_pfn; - for_each_nodebank (i,mi,node) { struct membank *bank = &mi->bank[i]; unsigned int pfn1, pfn2; @@ -97,8 +94,8 @@ void show_mem(void) pfn1 = bank_pfn_start(bank); pfn2 = bank_pfn_end(bank); - page = map + pfn1; - end = map + pfn2; + page = pfn_to_page(pfn1); + end = pfn_to_page(pfn2 - 1) + 1; do { total++; @@ -603,9 +600,6 @@ void __init mem_init(void) reserved_pages = free_pages = 0; for_each_online_node(node) { - pg_data_t *n = NODE_DATA(node); - struct page *map = pgdat_page_nr(n, 0) - n->node_start_pfn; - for_each_nodebank(i, &meminfo, node) { struct membank *bank = &meminfo.bank[i]; unsigned int pfn1, pfn2; @@ -614,8 +608,8 @@ void __init mem_init(void) pfn1 = bank_pfn_start(bank); pfn2 = bank_pfn_end(bank); - page = map + pfn1; - end = map + pfn2; + page = pfn_to_page(pfn1); + end = pfn_to_page(pfn2 - 1) + 1; do { if (PageReserved(page)) diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h index 07be8ad7ec3..7c4870bd5a2 100644 --- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h +++ b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h @@ -31,7 +31,13 @@ #define DMA_MODE_WRITE 1 #define DMA_MODE_MASK 1 -#define DMA_BASE IO_ADDRESS(DMA_BASE_ADDR) +#define MX1_DMA_REG(offset) MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR + (offset)) + +/* DMA Interrupt Mask Register */ +#define MX1_DMA_DIMR MX1_DMA_REG(0x08) + +/* Channel Control Register */ +#define MX1_DMA_CCR(x) MX1_DMA_REG(0x8c + ((x) << 6)) #define IMX_DMA_MEMSIZE_32 (0 << 4) #define IMX_DMA_MEMSIZE_8 (1 << 4) diff --git a/arch/arm/plat-pxa/Kconfig b/arch/arm/plat-pxa/Kconfig index b158e98038e..da53395a17c 100644 --- a/arch/arm/plat-pxa/Kconfig +++ b/arch/arm/plat-pxa/Kconfig @@ -1,3 +1,8 @@ if PLAT_PXA +config PXA_SSP + tristate + help + Enable support for PXA2xx SSP ports + endif diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile index 0264bfb0ca4..4aacdd12c9c 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/arch/arm/plat-pxa/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_PXA3xx) += mfp.o obj-$(CONFIG_ARCH_MMP) += mfp.o obj-$(CONFIG_HAVE_PWM) += pwm.o +obj-$(CONFIG_PXA_SSP) += ssp.o diff --git a/arch/arm/plat-pxa/dma.c b/arch/arm/plat-pxa/dma.c index 742350e0f2a..2d3c19d7c7b 100644 --- a/arch/arm/plat-pxa/dma.c +++ b/arch/arm/plat-pxa/dma.c @@ -245,7 +245,7 @@ static void pxa_dma_init_debugfs(void) dbgfs_chan = kmalloc(sizeof(*dbgfs_state) * num_dma_channels, GFP_KERNEL); - if (!dbgfs_state) + if (!dbgfs_chan) goto err_alloc; chandir = debugfs_create_dir("channels", dbgfs_root); diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h index 857a6839071..9e604c80618 100644 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ b/arch/arm/plat-pxa/include/plat/mfp.h @@ -316,6 +316,13 @@ enum { MFP_PIN_PMIC_INT, MFP_PIN_RDY, + /* additional pins on MMP2 */ + MFP_PIN_TWSI1_SCL, + MFP_PIN_TWSI1_SDA, + MFP_PIN_TWSI4_SCL, + MFP_PIN_TWSI4_SDA, + MFP_PIN_CLK_REQ, + MFP_PIN_MAX, }; diff --git a/arch/arm/mach-pxa/include/mach/regs-ssp.h b/arch/arm/plat-pxa/include/plat/ssp.h index 6a2ed35acd5..fe43150690e 100644 --- a/arch/arm/mach-pxa/include/mach/regs-ssp.h +++ b/arch/arm/plat-pxa/include/plat/ssp.h @@ -1,5 +1,26 @@ -#ifndef __ASM_ARCH_REGS_SSP_H -#define __ASM_ARCH_REGS_SSP_H +/* + * ssp.h + * + * Copyright (C) 2003 Russell King, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver supports the following PXA CPU/SSP ports:- + * + * PXA250 SSP + * PXA255 SSP, NSSP + * PXA26x SSP, NSSP, ASSP + * PXA27x SSP1, SSP2, SSP3 + * PXA3xx SSP1, SSP2, SSP3, SSP4 + */ + +#ifndef __ASM_ARCH_SSP_H +#define __ASM_ARCH_SSP_H + +#include <linux/list.h> +#include <linux/io.h> /* * SSP Serial Port Registers @@ -19,10 +40,7 @@ #define SSRSA (0x34) /* SSP Rx Timeslot Active */ #define SSTSS (0x38) /* SSP Timeslot Status */ #define SSACD (0x3C) /* SSP Audio Clock Divider */ - -#if defined(CONFIG_PXA3xx) #define SSACDD (0x40) /* SSP Audio Clock Dither Divider */ -#endif /* Common PXA2xx bits first */ #define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */ @@ -33,29 +51,19 @@ #define SSCR0_National (0x2 << 4) /* National Microwire */ #define SSCR0_ECS (1 << 6) /* External clock select */ #define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */ +#define SSCR0_SCR(x) ((x) << 8) /* Serial Clock Rate (mask) */ -#if defined(CONFIG_PXA25x) -#define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */ -#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */ -#elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) -#define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */ -#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */ -#endif - -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) +/* PXA27x, PXA3xx */ #define SSCR0_EDSS (1 << 20) /* Extended data size select */ #define SSCR0_NCS (1 << 21) /* Network clock select */ #define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */ #define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */ #define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ #define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */ +#define SSCR0_FPCKE (1 << 29) /* FIFO packing enable */ #define SSCR0_ACS (1 << 30) /* Audio clock select */ #define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ -#endif -#if defined(CONFIG_PXA3xx) -#define SSCR0_FPCKE (1 << 29) /* FIFO packing enable */ -#endif #define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ #define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ @@ -75,10 +83,6 @@ #define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */ #define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */ -#define SSCR0_TIM (1 << 23) /* Transmit FIFO Under Run Interrupt Mask */ -#define SSCR0_RIM (1 << 22) /* Receive FIFO Over Run interrupt Mask */ -#define SSCR0_NCS (1 << 21) /* Network Clock Select */ -#define SSCR0_EDSS (1 << 20) /* Extended Data Size Select */ /* extra bits in PXA255, PXA26x and PXA27x SSP ports */ #define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */ @@ -108,27 +112,75 @@ #define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ #define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */ -#if defined(CONFIG_PXA3xx) -#define SSPSP_EDMYSTOP(x) ((x) << 28) /* Extended Dummy Stop */ -#define SSPSP_EDMYSTRT(x) ((x) << 26) /* Extended Dummy Start */ -#endif -#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ -#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ -#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ -#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */ -#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */ -#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */ -#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */ -#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */ #define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */ +#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */ +#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */ +#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */ +#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */ +#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */ +#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ +#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ +#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ + +/* PXA3xx */ +#define SSPSP_EDMYSTRT(x) ((x) << 26) /* Extended Dummy Start */ +#define SSPSP_EDMYSTOP(x) ((x) << 28) /* Extended Dummy Stop */ +#define SSPSP_TIMING_MASK (0x7f8001f0) #define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */ #define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */ #define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */ -#if defined(CONFIG_PXA3xx) #define SSACD_SCDX8 (1 << 7) /* SYSCLK division ratio select */ -#endif - -#endif /* __ASM_ARCH_REGS_SSP_H */ +enum pxa_ssp_type { + SSP_UNDEFINED = 0, + PXA25x_SSP, /* pxa 210, 250, 255, 26x */ + PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ + PXA27x_SSP, + PXA168_SSP, +}; + +struct ssp_device { + struct platform_device *pdev; + struct list_head node; + + struct clk *clk; + void __iomem *mmio_base; + unsigned long phys_base; + + const char *label; + int port_id; + int type; + int use_count; + int irq; + int drcmr_rx; + int drcmr_tx; +}; + +/** + * pxa_ssp_write_reg - Write to a SSP register + * + * @dev: SSP device to access + * @reg: Register to write to + * @val: Value to be written. + */ +static inline void pxa_ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val) +{ + __raw_writel(val, dev->mmio_base + reg); +} + +/** + * pxa_ssp_read_reg - Read from a SSP register + * + * @dev: SSP device to access + * @reg: Register to read from + */ +static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg) +{ + return __raw_readl(dev->mmio_base + reg); +} + +struct ssp_device *pxa_ssp_request(int port, const char *label); +void pxa_ssp_free(struct ssp_device *); +#endif /* __ASM_ARCH_SSP_H */ diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c index be58f9fe65b..b77e018d36c 100644 --- a/arch/arm/plat-pxa/mfp.c +++ b/arch/arm/plat-pxa/mfp.c @@ -110,6 +110,7 @@ static const unsigned long mfpr_lpm[] = { MFPR_LPM_PULL_LOW, MFPR_LPM_PULL_HIGH, MFPR_LPM_FLOAT, + MFPR_LPM_INPUT, }; /* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */ diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c new file mode 100644 index 00000000000..c6357e554ab --- /dev/null +++ b/arch/arm/plat-pxa/ssp.c @@ -0,0 +1,224 @@ +/* + * linux/arch/arm/mach-pxa/ssp.c + * + * based on linux/arch/arm/mach-sa1100/ssp.c by Russell King + * + * Copyright (C) 2003 Russell King. + * Copyright (C) 2003 Wolfson Microelectronics PLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * PXA2xx SSP driver. This provides the generic core for simple + * IO-based SSP applications and allows easy port setup for DMA access. + * + * Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/mutex.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <asm/irq.h> +#include <mach/hardware.h> +#include <plat/ssp.h> + +static DEFINE_MUTEX(ssp_lock); +static LIST_HEAD(ssp_list); + +struct ssp_device *pxa_ssp_request(int port, const char *label) +{ + struct ssp_device *ssp = NULL; + + mutex_lock(&ssp_lock); + + list_for_each_entry(ssp, &ssp_list, node) { + if (ssp->port_id == port && ssp->use_count == 0) { + ssp->use_count++; + ssp->label = label; + break; + } + } + + mutex_unlock(&ssp_lock); + + if (&ssp->node == &ssp_list) + return NULL; + + return ssp; +} +EXPORT_SYMBOL(pxa_ssp_request); + +void pxa_ssp_free(struct ssp_device *ssp) +{ + mutex_lock(&ssp_lock); + if (ssp->use_count) { + ssp->use_count--; + ssp->label = NULL; + } else + dev_err(&ssp->pdev->dev, "device already free\n"); + mutex_unlock(&ssp_lock); +} +EXPORT_SYMBOL(pxa_ssp_free); + +static int __devinit pxa_ssp_probe(struct platform_device *pdev) +{ + const struct platform_device_id *id = platform_get_device_id(pdev); + struct resource *res; + struct ssp_device *ssp; + int ret = 0; + + ssp = kzalloc(sizeof(struct ssp_device), GFP_KERNEL); + if (ssp == NULL) { + dev_err(&pdev->dev, "failed to allocate memory"); + return -ENOMEM; + } + ssp->pdev = pdev; + + ssp->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(ssp->clk)) { + ret = PTR_ERR(ssp->clk); + goto err_free; + } + + res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (res == NULL) { + dev_err(&pdev->dev, "no SSP RX DRCMR defined\n"); + ret = -ENODEV; + goto err_free_clk; + } + ssp->drcmr_rx = res->start; + + res = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (res == NULL) { + dev_err(&pdev->dev, "no SSP TX DRCMR defined\n"); + ret = -ENODEV; + goto err_free_clk; + } + ssp->drcmr_tx = res->start; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "no memory resource defined\n"); + ret = -ENODEV; + goto err_free_clk; + } + + res = request_mem_region(res->start, resource_size(res), + pdev->name); + if (res == NULL) { + dev_err(&pdev->dev, "failed to request memory resource\n"); + ret = -EBUSY; + goto err_free_clk; + } + + ssp->phys_base = res->start; + + ssp->mmio_base = ioremap(res->start, resource_size(res)); + if (ssp->mmio_base == NULL) { + dev_err(&pdev->dev, "failed to ioremap() registers\n"); + ret = -ENODEV; + goto err_free_mem; + } + + ssp->irq = platform_get_irq(pdev, 0); + if (ssp->irq < 0) { + dev_err(&pdev->dev, "no IRQ resource defined\n"); + ret = -ENODEV; + goto err_free_io; + } + + /* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id + * starts from 0, do a translation here + */ + ssp->port_id = pdev->id + 1; + ssp->use_count = 0; + ssp->type = (int)id->driver_data; + + mutex_lock(&ssp_lock); + list_add(&ssp->node, &ssp_list); + mutex_unlock(&ssp_lock); + + platform_set_drvdata(pdev, ssp); + return 0; + +err_free_io: + iounmap(ssp->mmio_base); +err_free_mem: + release_mem_region(res->start, resource_size(res)); +err_free_clk: + clk_put(ssp->clk); +err_free: + kfree(ssp); + return ret; +} + +static int __devexit pxa_ssp_remove(struct platform_device *pdev) +{ + struct resource *res; + struct ssp_device *ssp; + + ssp = platform_get_drvdata(pdev); + if (ssp == NULL) + return -ENODEV; + + iounmap(ssp->mmio_base); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + + clk_put(ssp->clk); + + mutex_lock(&ssp_lock); + list_del(&ssp->node); + mutex_unlock(&ssp_lock); + + kfree(ssp); + return 0; +} + +static const struct platform_device_id ssp_id_table[] = { + { "pxa25x-ssp", PXA25x_SSP }, + { "pxa25x-nssp", PXA25x_NSSP }, + { "pxa27x-ssp", PXA27x_SSP }, + { "pxa168-ssp", PXA168_SSP }, + { }, +}; + +static struct platform_driver pxa_ssp_driver = { + .probe = pxa_ssp_probe, + .remove = __devexit_p(pxa_ssp_remove), + .driver = { + .owner = THIS_MODULE, + .name = "pxa2xx-ssp", + }, + .id_table = ssp_id_table, +}; + +static int __init pxa_ssp_init(void) +{ + return platform_driver_register(&pxa_ssp_driver); +} + +static void __exit pxa_ssp_exit(void) +{ + platform_driver_unregister(&pxa_ssp_driver); +} + +arch_initcall(pxa_ssp_init); +module_exit(pxa_ssp_exit); + +MODULE_DESCRIPTION("PXA SSP driver"); +MODULE_AUTHOR("Liam Girdwood"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 1536f1784ca..8f10d24ae62 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Sat Mar 20 15:35:41 2010 +# Last update: Sat May 1 10:36:42 2010 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -2749,3 +2749,58 @@ stamp9g45 MACH_STAMP9G45 STAMP9G45 2761 h6053 MACH_H6053 H6053 2762 smint01 MACH_SMINT01 SMINT01 2763 prtlvt2 MACH_PRTLVT2 PRTLVT2 2764 +ap420 MACH_AP420 AP420 2765 +htcshift MACH_HTCSHIFT HTCSHIFT 2766 +davinci_dm365_fc MACH_DAVINCI_DM365_FC DAVINCI_DM365_FC 2767 +msm8x55_surf MACH_MSM8X55_SURF MSM8X55_SURF 2768 +msm8x55_ffa MACH_MSM8X55_FFA MSM8X55_FFA 2769 +esl_vamana MACH_ESL_VAMANA ESL_VAMANA 2770 +sbc35 MACH_SBC35 SBC35 2771 +mpx6446 MACH_MPX6446 MPX6446 2772 +oreo_controller MACH_OREO_CONTROLLER OREO_CONTROLLER 2773 +kopin_models MACH_KOPIN_MODELS KOPIN_MODELS 2774 +ttc_vision2 MACH_TTC_VISION2 TTC_VISION2 2775 +cns3420vb MACH_CNS3420VB CNS3420VB 2776 +lpc2 MACH_LPC2 LPC2 2777 +olympus MACH_OLYMPUS OLYMPUS 2778 +vortex MACH_VORTEX VORTEX 2779 +s5pc200 MACH_S5PC200 S5PC200 2780 +ecucore_9263 MACH_ECUCORE_9263 ECUCORE_9263 2781 +smdkc200 MACH_SMDKC200 SMDKC200 2782 +emsiso_sx27 MACH_EMSISO_SX27 EMSISO_SX27 2783 +apx_som9g45_ek MACH_APX_SOM9G45_EK APX_SOM9G45_EK 2784 +songshan MACH_SONGSHAN SONGSHAN 2785 +tianshan MACH_TIANSHAN TIANSHAN 2786 +vpx500 MACH_VPX500 VPX500 2787 +am3517sam MACH_AM3517SAM AM3517SAM 2788 +skat91_sim508 MACH_SKAT91_SIM508 SKAT91_SIM508 2789 +skat91_s3e MACH_SKAT91_S3E SKAT91_S3E 2790 +omap4_panda MACH_OMAP4_PANDA OMAP4_PANDA 2791 +df7220 MACH_DF7220 DF7220 2792 +nemini MACH_NEMINI NEMINI 2793 +t8200 MACH_T8200 T8200 2794 +apf51 MACH_APF51 APF51 2795 +dr_rc_unit MACH_DR_RC_UNIT DR_RC_UNIT 2796 +bordeaux MACH_BORDEAUX BORDEAUX 2797 +catania_b MACH_CATANIA_B CATANIA_B 2798 +mx51_ocean MACH_MX51_OCEAN MX51_OCEAN 2799 +ti8168evm MACH_TI8168EVM TI8168EVM 2800 +neocoreomap MACH_NEOCOREOMAP NEOCOREOMAP 2801 +withings_wbp MACH_WITHINGS_WBP WITHINGS_WBP 2802 +dbps MACH_DBPS DBPS 2803 +sbc9261 MACH_SBC9261 SBC9261 2804 +pcbfp0001 MACH_PCBFP0001 PCBFP0001 2805 +speedy MACH_SPEEDY SPEEDY 2806 +chrysaor MACH_CHRYSAOR CHRYSAOR 2807 +tango MACH_TANGO TANGO 2808 +synology_dsx11 MACH_SYNOLOGY_DSX11 SYNOLOGY_DSX11 2809 +hanlin_v3ext MACH_HANLIN_V3EXT HANLIN_V3EXT 2810 +hanlin_v5 MACH_HANLIN_V5 HANLIN_V5 2811 +hanlin_v3plus MACH_HANLIN_V3PLUS HANLIN_V3PLUS 2812 +iriver_story MACH_IRIVER_STORY IRIVER_STORY 2813 +irex_iliad MACH_IREX_ILIAD IREX_ILIAD 2814 +irex_dr1000 MACH_IREX_DR1000 IREX_DR1000 2815 +teton_bga MACH_TETON_BGA TETON_BGA 2816 +snapper9g45 MACH_SNAPPER9G45 SNAPPER9G45 2817 +tam3517 MACH_TAM3517 TAM3517 2818 +pdc100 MACH_PDC100 PDC100 2819 diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig index 6fced1fe3bf..3c91cf6192c 100644 --- a/arch/microblaze/configs/mmu_defconfig +++ b/arch/microblaze/configs/mmu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc6 -# Wed Feb 3 10:02:59 2010 +# Linux kernel version: 2.6.34-rc6 +# Thu May 6 11:22:14 2010 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -22,8 +22,6 @@ CONFIG_GENERIC_CSUM=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y -# CONFIG_PCI is not set -CONFIG_NO_DMA=y CONFIG_DTC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -56,7 +54,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -106,6 +103,8 @@ CONFIG_SLAB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -245,13 +244,20 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Bus Options +# +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_NET=y # # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -341,7 +347,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set +CONFIG_OF_FLATTREE=y CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set @@ -370,6 +378,7 @@ CONFIG_MISC_DEVICES=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -383,9 +392,30 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MICREL_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set # CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set @@ -394,6 +424,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set # CONFIG_KS8842 is not set # CONFIG_KS8851_MLL is not set CONFIG_XILINX_EMACLITE=y @@ -444,6 +475,7 @@ CONFIG_SERIAL_UARTLITE=y CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -471,6 +503,12 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set # # Multifunction device drivers @@ -502,6 +540,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set @@ -572,6 +611,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -595,6 +635,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set CONFIG_CIFS=y CONFIG_CIFS_STATS=y CONFIG_CIFS_STATS2=y @@ -696,6 +737,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set CONFIG_DEBUG_SLAB=y # CONFIG_DEBUG_SLAB_LEAK is not set +# CONFIG_DEBUG_KMEMLEAK is not set CONFIG_DEBUG_SPINLOCK=y # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -741,6 +783,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_EARLY_PRINTK=y # CONFIG_HEART_BEAT is not set @@ -862,5 +905,6 @@ CONFIG_ZLIB_INFLATE=y CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig index ce2da535246..dd3a494257f 100644 --- a/arch/microblaze/configs/nommu_defconfig +++ b/arch/microblaze/configs/nommu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc6 -# Wed Feb 3 10:03:21 2010 +# Linux kernel version: 2.6.34-rc6 +# Thu May 6 11:25:12 2010 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -22,8 +22,6 @@ CONFIG_GENERIC_CSUM=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y -# CONFIG_PCI is not set -CONFIG_NO_DMA=y CONFIG_DTC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -58,7 +56,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -96,6 +93,8 @@ CONFIG_SLAB=y # CONFIG_MMAP_ALLOW_UNINITIALIZED is not set # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -209,11 +208,14 @@ CONFIG_PROC_DEVICETREE=y # # Advanced setup # +# CONFIG_ADVANCED_OPTIONS is not set # # Default settings for advanced configuration options are used # +CONFIG_LOWMEM_SIZE=0x30000000 CONFIG_KERNEL_START=0x90000000 +CONFIG_TASK_SIZE=0x80000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -235,13 +237,20 @@ CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Bus Options +# +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_NET=y # # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -413,6 +422,7 @@ CONFIG_MTD_UCLINUX=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -442,6 +452,7 @@ CONFIG_MISC_DEVICES=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -458,6 +469,7 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set # CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set @@ -466,6 +478,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set # CONFIG_KS8842 is not set # CONFIG_KS8851_MLL is not set # CONFIG_XILINX_EMACLITE is not set @@ -516,6 +529,7 @@ CONFIG_SERIAL_UARTLITE=y CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -544,6 +558,12 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set # # Multifunction device drivers @@ -593,6 +613,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set @@ -661,6 +682,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -689,6 +711,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -733,6 +756,7 @@ CONFIG_DEBUG_OBJECTS_TIMERS=y # CONFIG_DEBUG_OBJECTS_WORK is not set CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -758,6 +782,7 @@ CONFIG_DEBUG_SG=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -782,6 +807,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_EARLY_PRINTK=y # CONFIG_HEART_BEAT is not set @@ -901,5 +927,6 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y diff --git a/arch/microblaze/include/asm/cache.h b/arch/microblaze/include/asm/cache.h index e52210891d7..4efe96a036f 100644 --- a/arch/microblaze/include/asm/cache.h +++ b/arch/microblaze/include/asm/cache.h @@ -15,7 +15,7 @@ #include <asm/registers.h> -#define L1_CACHE_SHIFT 2 +#define L1_CACHE_SHIFT 5 /* word-granular cache in microblaze */ #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) diff --git a/arch/microblaze/include/asm/dma.h b/arch/microblaze/include/asm/dma.h index 08c073badf1..0d73d0c6de3 100644 --- a/arch/microblaze/include/asm/dma.h +++ b/arch/microblaze/include/asm/dma.h @@ -18,4 +18,10 @@ #define MAX_DMA_ADDRESS (CONFIG_KERNEL_START + memory_size - 1) #endif +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + #endif /* _ASM_MICROBLAZE_DMA_H */ diff --git a/arch/microblaze/include/asm/exceptions.h b/arch/microblaze/include/asm/exceptions.h index 90731df9e57..4c7b5d037c8 100644 --- a/arch/microblaze/include/asm/exceptions.h +++ b/arch/microblaze/include/asm/exceptions.h @@ -64,12 +64,6 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, void die(const char *str, struct pt_regs *fp, long err); void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr); -#ifdef CONFIG_MMU -void __bug(const char *file, int line, void *data); -int bad_trap(int trap_num, struct pt_regs *regs); -int debug_trap(struct pt_regs *regs); -#endif /* CONFIG_MMU */ - #if defined(CONFIG_KGDB) void (*debugger)(struct pt_regs *regs); int (*debugger_bpt)(struct pt_regs *regs); diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index e45a6eea92e..00b5398d08c 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -139,8 +139,6 @@ static inline void writel(unsigned int v, volatile void __iomem *addr) #ifdef CONFIG_MMU -#define mm_ptov(addr) ((void *)__phys_to_virt(addr)) -#define mm_vtop(addr) ((unsigned long)__virt_to_phys(addr)) #define phys_to_virt(addr) ((void *)__phys_to_virt(addr)) #define virt_to_phys(addr) ((unsigned long)__virt_to_phys(addr)) #define virt_to_bus(addr) ((unsigned long)__virt_to_phys(addr)) diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h index 2dd1d04129e..de493f86d28 100644 --- a/arch/microblaze/include/asm/page.h +++ b/arch/microblaze/include/asm/page.h @@ -31,6 +31,9 @@ #ifndef __ASSEMBLY__ +/* MS be sure that SLAB allocates aligned objects */ +#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES + #define PAGE_UP(addr) (((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1))) #define PAGE_DOWN(addr) ((addr)&(~((PAGE_SIZE)-1))) @@ -70,14 +73,7 @@ typedef unsigned long pte_basic_t; #endif /* CONFIG_MMU */ -# ifndef CONFIG_MMU -# define copy_page(to, from) memcpy((to), (from), PAGE_SIZE) -# define get_user_page(vaddr) __get_free_page(GFP_KERNEL) -# define free_user_page(page, addr) free_page(addr) -# else /* CONFIG_MMU */ -extern void copy_page(void *to, void *from); -# endif /* CONFIG_MMU */ - +# define copy_page(to, from) memcpy((to), (from), PAGE_SIZE) # define clear_page(pgaddr) memset((pgaddr), 0, PAGE_SIZE) # define clear_user_page(pgaddr, vaddr, page) memset((pgaddr), 0, PAGE_SIZE) diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h index bdd65aaee30..5a388eeeb28 100644 --- a/arch/microblaze/include/asm/pci.h +++ b/arch/microblaze/include/asm/pci.h @@ -94,14 +94,6 @@ extern int pci_mmap_legacy_page_range(struct pci_bus *bus, #define HAVE_PCI_LEGACY 1 -/* pci_unmap_{page,single} is a nop so... */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) -#define pci_unmap_addr(PTR, ADDR_NAME) (0) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) -#define pci_unmap_len(PTR, LEN_NAME) (0) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) - /* The PCI address space does equal the physical memory * address space (no IOMMU). The IDE and SCSI device layers use * this boolean for bounce buffer decisions. diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h index f44b0d696fe..c614a893f8a 100644 --- a/arch/microblaze/include/asm/pgalloc.h +++ b/arch/microblaze/include/asm/pgalloc.h @@ -108,21 +108,7 @@ extern inline void free_pgd_slow(pgd_t *pgd) #define pmd_alloc_one_fast(mm, address) ({ BUG(); ((pmd_t *)1); }) #define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); }) -static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, - unsigned long address) -{ - pte_t *pte; - extern void *early_get_page(void); - if (mem_init_done) { - pte = (pte_t *)__get_free_page(GFP_KERNEL | - __GFP_REPEAT | __GFP_ZERO); - } else { - pte = (pte_t *)early_get_page(); - if (pte) - clear_page(pte); - } - return pte; -} +extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr); static inline struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address) diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h index dd2bb60651c..ca2d9287154 100644 --- a/arch/microblaze/include/asm/pgtable.h +++ b/arch/microblaze/include/asm/pgtable.h @@ -512,15 +512,6 @@ static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address) extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; /* - * When flushing the tlb entry for a page, we also need to flush the hash - * table entry. flush_hash_page is assembler (for speed) in hashtable.S. - */ -extern int flush_hash_page(unsigned context, unsigned long va, pte_t *ptep); - -/* Add an HPTE to the hash table */ -extern void add_hash_page(unsigned context, unsigned long va, pte_t *ptep); - -/* * Encode and decode a swap entry. * Note that the bits we use in a PTE for representing a swap entry * must not include the _PAGE_PRESENT bit, or the _PAGE_HASHPTE bit @@ -533,15 +524,7 @@ extern void add_hash_page(unsigned context, unsigned long va, pte_t *ptep); #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 2 }) #define __swp_entry_to_pte(x) ((pte_t) { (x).val << 2 }) - -/* CONFIG_APUS */ -/* For virtual address to physical address conversion */ -extern void cache_clear(__u32 addr, int length); -extern void cache_push(__u32 addr, int length); -extern int mm_end_of_chunk(unsigned long addr, int len); extern unsigned long iopa(unsigned long addr); -/* extern unsigned long mm_ptov(unsigned long addr) \ - __attribute__ ((const)); TBD */ /* Values for nocacheflag and cmode */ /* These are not used by the APUS kernel_map, but prevents @@ -552,18 +535,6 @@ extern unsigned long iopa(unsigned long addr); #define IOMAP_NOCACHE_NONSER 2 #define IOMAP_NO_COPYBACK 3 -/* - * Map some physical address range into the kernel address space. - */ -extern unsigned long kernel_map(unsigned long paddr, unsigned long size, - int nocacheflag, unsigned long *memavailp); - -/* - * Set cache mode of (kernel space) address range. - */ -extern void kernel_set_cachemode(unsigned long address, unsigned long size, - unsigned int cmode); - /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ #define kern_addr_valid(addr) (1) @@ -577,10 +548,6 @@ extern void kernel_set_cachemode(unsigned long address, unsigned long size, void do_page_fault(struct pt_regs *regs, unsigned long address, unsigned long error_code); -void __init io_block_mapping(unsigned long virt, phys_addr_t phys, - unsigned int size, int flags); - -void __init adjust_total_lowmem(void); void mapin_ram(void); int map_page(unsigned long va, phys_addr_t pa, int flags); @@ -601,7 +568,7 @@ void __init *early_get_page(void); extern unsigned long ioremap_bot, ioremap_base; void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle); -void consistent_free(void *vaddr); +void consistent_free(size_t size, void *vaddr); void consistent_sync(void *vaddr, size_t size, int direction); void consistent_sync_page(struct page *page, unsigned long offset, size_t size, int direction); diff --git a/arch/microblaze/kernel/asm-offsets.c b/arch/microblaze/kernel/asm-offsets.c index 0071260a672..c1b459c9757 100644 --- a/arch/microblaze/kernel/asm-offsets.c +++ b/arch/microblaze/kernel/asm-offsets.c @@ -16,6 +16,7 @@ #include <linux/hardirq.h> #include <linux/thread_info.h> #include <linux/kbuild.h> +#include <asm/cpuinfo.h> int main(int argc, char *argv[]) { diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c index f04d8a86dea..21c3a92394d 100644 --- a/arch/microblaze/kernel/cpu/cache.c +++ b/arch/microblaze/kernel/cpu/cache.c @@ -96,13 +96,16 @@ static inline void __disable_dcache_nomsr(void) } -/* Helper macro for computing the limits of cache range loops */ +/* Helper macro for computing the limits of cache range loops + * + * End address can be unaligned which is OK for C implementation. + * ASM implementation align it in ASM macros + */ #define CACHE_LOOP_LIMITS(start, end, cache_line_length, cache_size) \ do { \ int align = ~(cache_line_length - 1); \ end = min(start + cache_size, end); \ start &= align; \ - end = ((end & align) + cache_line_length); \ } while (0); /* @@ -111,9 +114,9 @@ do { \ */ #define CACHE_ALL_LOOP(cache_size, line_length, op) \ do { \ - unsigned int len = cache_size; \ + unsigned int len = cache_size - line_length; \ int step = -line_length; \ - BUG_ON(step >= 0); \ + WARN_ON(step >= 0); \ \ __asm__ __volatile__ (" 1: " #op " %0, r0; \ bgtid %0, 1b; \ @@ -122,26 +125,21 @@ do { \ : "memory"); \ } while (0); - -#define CACHE_ALL_LOOP2(cache_size, line_length, op) \ -do { \ - unsigned int len = cache_size; \ - int step = -line_length; \ - BUG_ON(step >= 0); \ - \ - __asm__ __volatile__ (" 1: " #op " r0, %0; \ - bgtid %0, 1b; \ - addk %0, %0, %1; \ - " : : "r" (len), "r" (step) \ - : "memory"); \ -} while (0); - -/* for wdc.flush/clear */ +/* Used for wdc.flush/clear which can use rB for offset which is not possible + * to use for simple wdc or wic. + * + * start address is cache aligned + * end address is not aligned, if end is aligned then I have to substract + * cacheline length because I can't flush/invalidate the next cacheline. + * If is not, I align it because I will flush/invalidate whole line. + */ #define CACHE_RANGE_LOOP_2(start, end, line_length, op) \ do { \ int step = -line_length; \ + int align = ~(line_length - 1); \ + end = ((end & align) == end) ? end - line_length : end & align; \ int count = end - start; \ - BUG_ON(count <= 0); \ + WARN_ON(count < 0); \ \ __asm__ __volatile__ (" 1: " #op " %0, %1; \ bgtid %1, 1b; \ @@ -154,7 +152,9 @@ do { \ #define CACHE_RANGE_LOOP_1(start, end, line_length, op) \ do { \ int volatile temp; \ - BUG_ON(end - start <= 0); \ + int align = ~(line_length - 1); \ + end = ((end & align) == end) ? end - line_length : end & align; \ + WARN_ON(end - start < 0); \ \ __asm__ __volatile__ (" 1: " #op " %1, r0; \ cmpu %0, %1, %2; \ @@ -360,8 +360,12 @@ static void __invalidate_dcache_all_noirq_wt(void) #endif } -/* FIXME this is weird - should be only wdc but not work - * MS: I am getting bus errors and other weird things */ +/* FIXME It is blindly invalidation as is expected + * but can't be called on noMMU in microblaze_cache_init below + * + * MS: noMMU kernel won't boot if simple wdc is used + * The reason should be that there are discared data which kernel needs + */ static void __invalidate_dcache_all_wb(void) { #ifndef ASM_LOOP @@ -369,12 +373,12 @@ static void __invalidate_dcache_all_wb(void) #endif pr_debug("%s\n", __func__); #ifdef ASM_LOOP - CACHE_ALL_LOOP2(cpuinfo.dcache_size, cpuinfo.dcache_line_length, - wdc.clear) + CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, + wdc) #else for (i = 0; i < cpuinfo.dcache_size; i += cpuinfo.dcache_line_length) - __asm__ __volatile__ ("wdc.clear %0, r0;" \ + __asm__ __volatile__ ("wdc %0, r0;" \ : : "r" (i)); #endif } @@ -393,7 +397,7 @@ static void __invalidate_dcache_range_wb(unsigned long start, #ifdef ASM_LOOP CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.clear); #else - for (i = start; i < end; i += cpuinfo.icache_line_length) + for (i = start; i < end; i += cpuinfo.dcache_line_length) __asm__ __volatile__ ("wdc.clear %0, r0;" \ : : "r" (i)); #endif @@ -413,7 +417,7 @@ static void __invalidate_dcache_range_nomsr_wt(unsigned long start, #ifdef ASM_LOOP CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc); #else - for (i = start; i < end; i += cpuinfo.icache_line_length) + for (i = start; i < end; i += cpuinfo.dcache_line_length) __asm__ __volatile__ ("wdc %0, r0;" \ : : "r" (i)); #endif @@ -437,7 +441,7 @@ static void __invalidate_dcache_range_msr_irq_wt(unsigned long start, #ifdef ASM_LOOP CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc); #else - for (i = start; i < end; i += cpuinfo.icache_line_length) + for (i = start; i < end; i += cpuinfo.dcache_line_length) __asm__ __volatile__ ("wdc %0, r0;" \ : : "r" (i)); #endif @@ -465,7 +469,7 @@ static void __invalidate_dcache_range_nomsr_irq(unsigned long start, #ifdef ASM_LOOP CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc); #else - for (i = start; i < end; i += cpuinfo.icache_line_length) + for (i = start; i < end; i += cpuinfo.dcache_line_length) __asm__ __volatile__ ("wdc %0, r0;" \ : : "r" (i)); #endif @@ -504,7 +508,7 @@ static void __flush_dcache_range_wb(unsigned long start, unsigned long end) #ifdef ASM_LOOP CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.flush); #else - for (i = start; i < end; i += cpuinfo.icache_line_length) + for (i = start; i < end; i += cpuinfo.dcache_line_length) __asm__ __volatile__ ("wdc.flush %0, r0;" \ : : "r" (i)); #endif @@ -650,7 +654,11 @@ void microblaze_cache_init(void) } } } - invalidate_dcache(); +/* FIXME Invalidation is done in U-BOOT + * WT cache: Data is already written to main memory + * WB cache: Discard data on noMMU which caused that kernel doesn't boot + */ + /* invalidate_dcache(); */ enable_dcache(); invalidate_icache(); diff --git a/arch/microblaze/kernel/cpu/mb.c b/arch/microblaze/kernel/cpu/mb.c index 0c912b2a8e0..4216eb1eaa3 100644 --- a/arch/microblaze/kernel/cpu/mb.c +++ b/arch/microblaze/kernel/cpu/mb.c @@ -98,15 +98,17 @@ static int show_cpuinfo(struct seq_file *m, void *v) if (cpuinfo.use_icache) count += seq_printf(m, - "Icache:\t\t%ukB\n", - cpuinfo.icache_size >> 10); + "Icache:\t\t%ukB\tline length:\t%dB\n", + cpuinfo.icache_size >> 10, + cpuinfo.icache_line_length); else count += seq_printf(m, "Icache:\t\tno\n"); if (cpuinfo.use_dcache) { count += seq_printf(m, - "Dcache:\t\t%ukB\n", - cpuinfo.dcache_size >> 10); + "Dcache:\t\t%ukB\tline length:\t%dB\n", + cpuinfo.dcache_size >> 10, + cpuinfo.dcache_line_length); if (cpuinfo.dcache_wb) count += seq_printf(m, "\t\twrite-back\n"); else diff --git a/arch/microblaze/kernel/dma.c b/arch/microblaze/kernel/dma.c index ce72dd4967c..9dcd90b5df5 100644 --- a/arch/microblaze/kernel/dma.c +++ b/arch/microblaze/kernel/dma.c @@ -74,7 +74,7 @@ static void dma_direct_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle) { #ifdef NOT_COHERENT_CACHE - consistent_free(vaddr); + consistent_free(size, vaddr); #else free_pages((unsigned long)vaddr, get_order(size)); #endif diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c index d9f70f83097..02cbdfe5aa8 100644 --- a/arch/microblaze/kernel/exceptions.c +++ b/arch/microblaze/kernel/exceptions.c @@ -121,7 +121,7 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, } printk(KERN_WARNING "Divide by zero exception " \ "in kernel mode.\n"); - die("Divide by exception", regs, SIGBUS); + die("Divide by zero exception", regs, SIGBUS); break; case MICROBLAZE_FPU_EXCEPTION: pr_debug(KERN_WARNING "FPU exception\n"); diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index da6a5f5dc76..1bf73988826 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -28,6 +28,7 @@ * for more details. */ +#include <linux/init.h> #include <linux/linkage.h> #include <asm/thread_info.h> #include <asm/page.h> @@ -49,7 +50,7 @@ swapper_pg_dir: #endif /* CONFIG_MMU */ - .text + __HEAD ENTRY(_start) #if CONFIG_KERNEL_BASE_ADDR == 0 brai TOPHYS(real_start) diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c index 6f39e2c001f..8f120aca123 100644 --- a/arch/microblaze/kernel/irq.c +++ b/arch/microblaze/kernel/irq.c @@ -9,6 +9,7 @@ */ #include <linux/init.h> +#include <linux/ftrace.h> #include <linux/kernel.h> #include <linux/hardirq.h> #include <linux/interrupt.h> @@ -32,7 +33,7 @@ EXPORT_SYMBOL_GPL(irq_of_parse_and_map); static u32 concurrent_irq; -void do_IRQ(struct pt_regs *regs) +void __irq_entry do_IRQ(struct pt_regs *regs) { unsigned int irq; struct pt_regs *old_regs = set_irq_regs(regs); diff --git a/arch/microblaze/kernel/misc.S b/arch/microblaze/kernel/misc.S index 7cf86498326..0fb5fc6c1fc 100644 --- a/arch/microblaze/kernel/misc.S +++ b/arch/microblaze/kernel/misc.S @@ -93,39 +93,3 @@ early_console_reg_tlb_alloc: nop .size early_console_reg_tlb_alloc, . - early_console_reg_tlb_alloc - -/* - * Copy a whole page (4096 bytes). - */ -#define COPY_16_BYTES \ - lwi r7, r6, 0; \ - lwi r8, r6, 4; \ - lwi r9, r6, 8; \ - lwi r10, r6, 12; \ - swi r7, r5, 0; \ - swi r8, r5, 4; \ - swi r9, r5, 8; \ - swi r10, r5, 12 - - -/* FIXME DCACHE_LINE_BYTES (CONFIG_XILINX_MICROBLAZE0_DCACHE_LINE_LEN * 4)*/ -#define DCACHE_LINE_BYTES (4 * 4) - -.globl copy_page; -.type copy_page, @function -.align 4; -copy_page: - ori r11, r0, (PAGE_SIZE/DCACHE_LINE_BYTES) - 1 -_copy_page_loop: - COPY_16_BYTES -#if DCACHE_LINE_BYTES >= 32 - COPY_16_BYTES -#endif - addik r6, r6, DCACHE_LINE_BYTES - addik r5, r5, DCACHE_LINE_BYTES - bneid r11, _copy_page_loop - addik r11, r11, -1 - rtsd r15, 8 - nop - - .size copy_page, . - copy_page diff --git a/arch/microblaze/kernel/traps.c b/arch/microblaze/kernel/traps.c index 5e4570ef515..75e49202a5e 100644 --- a/arch/microblaze/kernel/traps.c +++ b/arch/microblaze/kernel/traps.c @@ -95,37 +95,3 @@ void dump_stack(void) show_stack(NULL, NULL); } EXPORT_SYMBOL(dump_stack); - -#ifdef CONFIG_MMU -void __bug(const char *file, int line, void *data) -{ - if (data) - printk(KERN_CRIT "kernel BUG at %s:%d (data = %p)!\n", - file, line, data); - else - printk(KERN_CRIT "kernel BUG at %s:%d!\n", file, line); - - machine_halt(); -} - -int bad_trap(int trap_num, struct pt_regs *regs) -{ - printk(KERN_CRIT - "unimplemented trap %d called at 0x%08lx, pid %d!\n", - trap_num, regs->pc, current->pid); - return -ENOSYS; -} - -int debug_trap(struct pt_regs *regs) -{ - int i; - printk(KERN_CRIT "debug trap\n"); - for (i = 0; i < 32; i++) { - /* printk("r%i:%08X\t",i,regs->gpr[i]); */ - if ((i % 4) == 3) - printk(KERN_CRIT "\n"); - } - printk(KERN_CRIT "pc:%08lX\tmsr:%08lX\n", regs->pc, regs->msr); - return -ENOSYS; -} -#endif diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index 5ef619aad63..db72d712460 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -24,7 +24,8 @@ SECTIONS { .text : AT(ADDR(.text) - LOAD_OFFSET) { _text = . ; _stext = . ; - *(.text .text.*) + HEAD_TEXT + TEXT_TEXT *(.fixup) EXIT_TEXT EXIT_CALL diff --git a/arch/microblaze/mm/consistent.c b/arch/microblaze/mm/consistent.c index f956e24fe49..5a59dad62bd 100644 --- a/arch/microblaze/mm/consistent.c +++ b/arch/microblaze/mm/consistent.c @@ -42,11 +42,12 @@ #include <linux/uaccess.h> #include <asm/pgtable.h> #include <asm/cpuinfo.h> +#include <asm/tlbflush.h> #ifndef CONFIG_MMU - /* I have to use dcache values because I can't relate on ram size */ -#define UNCACHED_SHADOW_MASK (cpuinfo.dcache_high - cpuinfo.dcache_base + 1) +# define UNCACHED_SHADOW_MASK (cpuinfo.dcache_high - cpuinfo.dcache_base + 1) +#endif /* * Consistent memory allocators. Used for DMA devices that want to @@ -60,71 +61,16 @@ */ void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle) { - struct page *page, *end, *free; - unsigned long order; - void *ret, *virt; - - if (in_interrupt()) - BUG(); - - size = PAGE_ALIGN(size); - order = get_order(size); - - page = alloc_pages(gfp, order); - if (!page) - goto no_page; - - /* We could do with a page_to_phys and page_to_bus here. */ - virt = page_address(page); - ret = ioremap(virt_to_phys(virt), size); - if (!ret) - goto no_remap; - - /* - * Here's the magic! Note if the uncached shadow is not implemented, - * it's up to the calling code to also test that condition and make - * other arranegments, such as manually flushing the cache and so on. - */ -#ifdef CONFIG_XILINX_UNCACHED_SHADOW - ret = (void *)((unsigned) ret | UNCACHED_SHADOW_MASK); -#endif - /* dma_handle is same as physical (shadowed) address */ - *dma_handle = (dma_addr_t)ret; - - /* - * free wasted pages. We skip the first page since we know - * that it will have count = 1 and won't require freeing. - * We also mark the pages in use as reserved so that - * remap_page_range works. - */ - page = virt_to_page(virt); - free = page + (size >> PAGE_SHIFT); - end = page + (1 << order); - - for (; page < end; page++) { - init_page_count(page); - if (page >= free) - __free_page(page); - else - SetPageReserved(page); - } - - return ret; -no_remap: - __free_pages(page, order); -no_page: - return NULL; -} - -#else + unsigned long order, vaddr; + void *ret; + unsigned int i, err = 0; + struct page *page, *end; -void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle) -{ - int order, err, i; - unsigned long page, va, flags; +#ifdef CONFIG_MMU phys_addr_t pa; struct vm_struct *area; - void *ret; + unsigned long va; +#endif if (in_interrupt()) BUG(); @@ -133,71 +79,133 @@ void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle) size = PAGE_ALIGN(size); order = get_order(size); - page = __get_free_pages(gfp, order); - if (!page) { - BUG(); + vaddr = __get_free_pages(gfp, order); + if (!vaddr) return NULL; - } /* * we need to ensure that there are no cachelines in use, * or worse dirty in this area. */ - flush_dcache_range(virt_to_phys(page), virt_to_phys(page) + size); + flush_dcache_range(virt_to_phys((void *)vaddr), + virt_to_phys((void *)vaddr) + size); +#ifndef CONFIG_MMU + ret = (void *)vaddr; + /* + * Here's the magic! Note if the uncached shadow is not implemented, + * it's up to the calling code to also test that condition and make + * other arranegments, such as manually flushing the cache and so on. + */ +# ifdef CONFIG_XILINX_UNCACHED_SHADOW + ret = (void *)((unsigned) ret | UNCACHED_SHADOW_MASK); +# endif + if ((unsigned int)ret > cpuinfo.dcache_base && + (unsigned int)ret < cpuinfo.dcache_high) + printk(KERN_WARNING + "ERROR: Your cache coherent area is CACHED!!!\n"); + + /* dma_handle is same as physical (shadowed) address */ + *dma_handle = (dma_addr_t)ret; +#else /* Allocate some common virtual space to map the new pages. */ area = get_vm_area(size, VM_ALLOC); - if (area == NULL) { - free_pages(page, order); + if (!area) { + free_pages(vaddr, order); return NULL; } va = (unsigned long) area->addr; ret = (void *)va; /* This gives us the real physical address of the first page. */ - *dma_handle = pa = virt_to_bus((void *)page); - - /* MS: This is the whole magic - use cache inhibit pages */ - flags = _PAGE_KERNEL | _PAGE_NO_CACHE; + *dma_handle = pa = virt_to_bus((void *)vaddr); +#endif /* - * Set refcount=1 on all pages in an order>0 - * allocation so that vfree() will actually - * free all pages that were allocated. + * free wasted pages. We skip the first page since we know + * that it will have count = 1 and won't require freeing. + * We also mark the pages in use as reserved so that + * remap_page_range works. */ - if (order > 0) { - struct page *rpage = virt_to_page(page); - for (i = 1; i < (1 << order); i++) - init_page_count(rpage+i); + page = virt_to_page(vaddr); + end = page + (1 << order); + + split_page(page, order); + + for (i = 0; i < size && err == 0; i += PAGE_SIZE) { +#ifdef CONFIG_MMU + /* MS: This is the whole magic - use cache inhibit pages */ + err = map_page(va + i, pa + i, _PAGE_KERNEL | _PAGE_NO_CACHE); +#endif + + SetPageReserved(page); + page++; } - err = 0; - for (i = 0; i < size && err == 0; i += PAGE_SIZE) - err = map_page(va+i, pa+i, flags); + /* Free the otherwise unused pages. */ + while (page < end) { + __free_page(page); + page++; + } if (err) { - vfree((void *)va); + free_pages(vaddr, order); return NULL; } return ret; } -#endif /* CONFIG_MMU */ EXPORT_SYMBOL(consistent_alloc); /* * free page(s) as defined by the above mapping. */ -void consistent_free(void *vaddr) +void consistent_free(size_t size, void *vaddr) { + struct page *page; + if (in_interrupt()) BUG(); + size = PAGE_ALIGN(size); + +#ifndef CONFIG_MMU /* Clear SHADOW_MASK bit in address, and free as per usual */ -#ifdef CONFIG_XILINX_UNCACHED_SHADOW +# ifdef CONFIG_XILINX_UNCACHED_SHADOW vaddr = (void *)((unsigned)vaddr & ~UNCACHED_SHADOW_MASK); +# endif + page = virt_to_page(vaddr); + + do { + ClearPageReserved(page); + __free_page(page); + page++; + } while (size -= PAGE_SIZE); +#else + do { + pte_t *ptep; + unsigned long pfn; + + ptep = pte_offset_kernel(pmd_offset(pgd_offset_k( + (unsigned int)vaddr), + (unsigned int)vaddr), + (unsigned int)vaddr); + if (!pte_none(*ptep) && pte_present(*ptep)) { + pfn = pte_pfn(*ptep); + pte_clear(&init_mm, (unsigned int)vaddr, ptep); + if (pfn_valid(pfn)) { + page = pfn_to_page(pfn); + + ClearPageReserved(page); + __free_page(page); + } + } + vaddr += PAGE_SIZE; + } while (size -= PAGE_SIZE); + + /* flush tlb */ + flush_tlb_all(); #endif - vfree(vaddr); } EXPORT_SYMBOL(consistent_free); @@ -221,7 +229,7 @@ void consistent_sync(void *vaddr, size_t size, int direction) case PCI_DMA_NONE: BUG(); case PCI_DMA_FROMDEVICE: /* invalidate only */ - flush_dcache_range(start, end); + invalidate_dcache_range(start, end); break; case PCI_DMA_TODEVICE: /* writeback only */ flush_dcache_range(start, end); diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c index 7af87f4b2c2..bab92299318 100644 --- a/arch/microblaze/mm/fault.c +++ b/arch/microblaze/mm/fault.c @@ -273,16 +273,11 @@ bad_area_nosemaphore: * us unable to handle the page fault gracefully. */ out_of_memory: - if (current->pid == 1) { - yield(); - down_read(&mm->mmap_sem); - goto survive; - } up_read(&mm->mmap_sem); - printk(KERN_WARNING "VM: killing process %s\n", current->comm); - if (user_mode(regs)) - do_exit(SIGKILL); - bad_page_fault(regs, address, SIGKILL); + if (!user_mode(regs)) + bad_page_fault(regs, address, SIGKILL); + else + pagefault_out_of_memory(); return; do_sigbus: diff --git a/arch/microblaze/mm/pgtable.c b/arch/microblaze/mm/pgtable.c index d31312cde6e..784557fb28c 100644 --- a/arch/microblaze/mm/pgtable.c +++ b/arch/microblaze/mm/pgtable.c @@ -161,24 +161,6 @@ int map_page(unsigned long va, phys_addr_t pa, int flags) return err; } -void __init adjust_total_lowmem(void) -{ -/* TBD */ -#if 0 - unsigned long max_low_mem = MAX_LOW_MEM; - - if (total_lowmem > max_low_mem) { - total_lowmem = max_low_mem; -#ifndef CONFIG_HIGHMEM - printk(KERN_INFO "Warning, memory limited to %ld Mb, use " - "CONFIG_HIGHMEM to reach %ld Mb\n", - max_low_mem >> 20, total_memory >> 20); - total_memory = total_lowmem; -#endif /* CONFIG_HIGHMEM */ - } -#endif -} - /* * Map in all of physical memory starting at CONFIG_KERNEL_START. */ @@ -206,24 +188,6 @@ void __init mapin_ram(void) /* is x a power of 2? */ #define is_power_of_2(x) ((x) != 0 && (((x) & ((x) - 1)) == 0)) -/* - * Set up a mapping for a block of I/O. - * virt, phys, size must all be page-aligned. - * This should only be called before ioremap is called. - */ -void __init io_block_mapping(unsigned long virt, phys_addr_t phys, - unsigned int size, int flags) -{ - int i; - - if (virt > CONFIG_KERNEL_START && virt < ioremap_bot) - ioremap_bot = ioremap_base = virt; - - /* Put it in the page tables. */ - for (i = 0; i < size; i += PAGE_SIZE) - map_page(virt + i, phys + i, flags); -} - /* Scan the real Linux page tables and return a PTE pointer for * a virtual address in a context. * Returns true (1) if PTE was found, zero otherwise. The pointer to @@ -274,3 +238,18 @@ unsigned long iopa(unsigned long addr) return pa; } + +__init_refok pte_t *pte_alloc_one_kernel(struct mm_struct *mm, + unsigned long address) +{ + pte_t *pte; + if (mem_init_done) { + pte = (pte_t *)__get_free_page(GFP_KERNEL | + __GFP_REPEAT | __GFP_ZERO); + } else { + pte = (pte_t *)early_get_page(); + if (pte) + clear_page(pte); + } + return pte; +} diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c index 740bb32ec57..01c8c97c15b 100644 --- a/arch/microblaze/pci/pci-common.c +++ b/arch/microblaze/pci/pci-common.c @@ -1025,7 +1025,7 @@ static void __devinit pcibios_fixup_bridge(struct pci_bus *bus) struct pci_dev *dev = bus->self; - for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) { + pci_bus_for_each_resource(bus, res, i) { res = bus->resource[i]; if (!res) continue; @@ -1131,21 +1131,20 @@ static int skip_isa_ioresource_align(struct pci_dev *dev) * but we want to try to avoid allocating at 0x2900-0x2bff * which might have be mirrored at 0x0100-0x03ff.. */ -void pcibios_align_resource(void *data, struct resource *res, +resource_size_t pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; + resource_size_t start = res->start; if (res->flags & IORESOURCE_IO) { - resource_size_t start = res->start; - if (skip_isa_ioresource_align(dev)) - return; - if (start & 0x300) { + return start; + if (start & 0x300) start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } } + + return start; } EXPORT_SYMBOL(pcibios_align_resource); @@ -1228,7 +1227,7 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus) pr_debug("PCI: Allocating bus resources for %04x:%02x...\n", pci_domain_nr(bus), bus->number); - for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) { + pci_bus_for_each_resource(bus, res, i) { res = bus->resource[i]; if (!res || !res->flags || res->start > res->end || res->parent) diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig index fba1f62d56e..dba024d72a8 100644 --- a/arch/sh/configs/rts7751r2d1_defconfig +++ b/arch/sh/configs/rts7751r2d1_defconfig @@ -877,7 +877,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=1 +CONFIG_SERIAL_SH_SCI_NR_UARTS=2 CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig index a8d538f06e6..6d511d06cbf 100644 --- a/arch/sh/configs/rts7751r2dplus_defconfig +++ b/arch/sh/configs/rts7751r2dplus_defconfig @@ -963,7 +963,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=1 +CONFIG_SERIAL_SH_SCI_NR_UARTS=2 CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 17811e5d287..f98141b3b7d 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -17,6 +17,7 @@ #include <linux/io.h> #include "pci-sh4.h" #include <asm/addrspace.h> +#include <asm/sizes.h> static int __init __area_sdram_check(struct pci_channel *chan, unsigned int area) @@ -47,8 +48,8 @@ static int __init __area_sdram_check(struct pci_channel *chan, static struct resource sh7751_pci_resources[] = { { .name = "SH7751_IO", - .start = SH7751_PCI_IO_BASE, - .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, + .start = 0x1000, + .end = SZ_4M - 1, .flags = IORESOURCE_IO }, { .name = "SH7751_mem", diff --git a/arch/sh/include/cpu-sh4/cpu/dma-register.h b/arch/sh/include/cpu-sh4/cpu/dma-register.h index 55f9fec082d..de235953399 100644 --- a/arch/sh/include/cpu-sh4/cpu/dma-register.h +++ b/arch/sh/include/cpu-sh4/cpu/dma-register.h @@ -76,7 +76,7 @@ enum { } #define TS_INDEX2VAL(i) ((((i) & 3) << CHCR_TS_LOW_SHIFT) | \ - ((((i) >> 2) & 3) << CHCR_TS_HIGH_SHIFT)) + (((i) & 0xc) << CHCR_TS_HIGH_SHIFT)) #else /* CONFIG_CPU_SH4A */ |