diff options
Diffstat (limited to 'arch')
406 files changed, 17615 insertions, 5754 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e34bf0272da..b70fe202c00 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -722,7 +722,8 @@ config ARCH_S5P64X0 select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_WATCHDOG if WATCHDOG - select ARCH_USES_GETTIMEOFFSET + select GENERIC_CLOCKEVENTS + select HAVE_SCHED_CLOCK select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS help @@ -760,15 +761,16 @@ config ARCH_S5PV210 select HAVE_CLK select ARM_L1_CACHE_SHIFT_6 select ARCH_HAS_CPUFREQ - select ARCH_USES_GETTIMEOFFSET + select GENERIC_CLOCKEVENTS + select HAVE_SCHED_CLOCK select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_WATCHDOG if WATCHDOG help Samsung S5PV210/S5PC110 series based systems -config ARCH_S5PV310 - bool "Samsung S5PV310/S5PC210" +config ARCH_EXYNOS4 + bool "Samsung EXYNOS4" select CPU_V7 select ARCH_SPARSEMEM_ENABLE select GENERIC_GPIO @@ -779,7 +781,7 @@ config ARCH_S5PV310 select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG help - Samsung S5PV310 series based systems + Samsung EXYNOS4 series based systems config ARCH_SHARK bool "Shark" @@ -993,7 +995,7 @@ source "arch/arm/mach-s5pc100/Kconfig" source "arch/arm/mach-s5pv210/Kconfig" -source "arch/arm/mach-s5pv310/Kconfig" +source "arch/arm/mach-exynos4/Kconfig" source "arch/arm/mach-shmobile/Kconfig" @@ -1315,7 +1317,7 @@ config SMP depends on GENERIC_CLOCKEVENTS depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \ MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \ - ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \ + ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \ ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE select USE_GENERIC_SMP_HELPERS select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP @@ -1403,7 +1405,7 @@ config LOCAL_TIMERS bool "Use local timer interrupts" depends on SMP default y - select HAVE_ARM_TWD if !ARCH_MSM_SCORPIONMP + select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT) help Enable support for local timers on SMP platforms, rather then the legacy IPI broadcast method. Local timers allows the system @@ -1415,7 +1417,7 @@ source kernel/Kconfig.preempt config HZ int default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \ - ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310 + ARCH_S5P6442 || ARCH_S5PV210 || ARCH_EXYNOS4 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default AT91_TIMER_HZ if ARCH_AT91 default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 5c7114bb8a2..c7d321a3d95 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -181,7 +181,7 @@ machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0 machine-$(CONFIG_ARCH_S5P6442) := s5p6442 machine-$(CONFIG_ARCH_S5PC100) := s5pc100 machine-$(CONFIG_ARCH_S5PV210) := s5pv210 -machine-$(CONFIG_ARCH_S5PV310) := s5pv310 +machine-$(CONFIG_ARCH_EXYNOS4) := exynos4 machine-$(CONFIG_ARCH_SA1100) := sa1100 machine-$(CONFIG_ARCH_SHARK) := shark machine-$(CONFIG_ARCH_SHMOBILE) := shmobile diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig new file mode 100644 index 00000000000..2ffba24d2e2 --- /dev/null +++ b/arch/arm/configs/exynos4_defconfig @@ -0,0 +1,70 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_KALLSYMS_ALL=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_ARCH_EXYNOS4=y +CONFIG_S3C_LOWLEVEL_UART_PORT=1 +CONFIG_MACH_SMDKC210=y +CONFIG_MACH_SMDKV310=y +CONFIG_MACH_UNIVERSAL_C210=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +# CONFIG_HWMON is not set +# CONFIG_MFD_SUPPORT is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_CRAMFS=y +CONFIG_ROMFS_FS=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_BSD_DISKLABEL=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_SPINLOCK_SLEEP=y +CONFIG_DEBUG_INFO=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +CONFIG_DEBUG_S3C_UART=1 +CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 2f704281376..aeb3af541fe 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -24,6 +24,7 @@ CONFIG_MACH_OPENRD_ULTIMATE=y CONFIG_MACH_NETSPACE_V2=y CONFIG_MACH_INETSPACE_V2=y CONFIG_MACH_NETSPACE_MAX_V2=y +CONFIG_MACH_D2NET_V2=y CONFIG_MACH_NET2BIG_V2=y CONFIG_MACH_NET5BIG_V2=y CONFIG_MACH_T5325=y diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig index 9cba68cfa51..e3c903281f7 100644 --- a/arch/arm/configs/mx51_defconfig +++ b/arch/arm/configs/mx51_defconfig @@ -110,7 +110,7 @@ CONFIG_MMC=y CONFIG_MMC_BLOCK=m CONFIG_MMC_SDHCI=m CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=m +CONFIG_LEDS_CLASS=y CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/s5p64x0_defconfig b/arch/arm/configs/s5p64x0_defconfig index 2993ecd3514..ad6b61b0bd1 100644 --- a/arch/arm/configs/s5p64x0_defconfig +++ b/arch/arm/configs/s5p64x0_defconfig @@ -10,6 +10,8 @@ CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_S3C_LOWLEVEL_UART_PORT=1 CONFIG_MACH_SMDK6440=y CONFIG_MACH_SMDK6450=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_CPU_32v6K=y CONFIG_AEABI=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig index 0488a1eb4d7..fa989902236 100644 --- a/arch/arm/configs/s5pv210_defconfig +++ b/arch/arm/configs/s5pv210_defconfig @@ -13,6 +13,8 @@ CONFIG_MACH_AQUILA=y CONFIG_MACH_GONI=y CONFIG_MACH_SMDKC110=y CONFIG_MACH_SMDKV210=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT=y CONFIG_AEABI=y diff --git a/arch/arm/include/asm/kexec.h b/arch/arm/include/asm/kexec.h index c0094d8edae..c2b9b4bdec0 100644 --- a/arch/arm/include/asm/kexec.h +++ b/arch/arm/include/asm/kexec.h @@ -50,6 +50,9 @@ static inline void crash_setup_regs(struct pt_regs *newregs, } } +/* Function pointer to optional machine-specific reinitialization */ +extern void (*kexec_reinit)(void); + #endif /* __ASSEMBLY__ */ #endif /* CONFIG_KEXEC */ diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 8ccea012722..7544ce6b481 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -12,11 +12,25 @@ #ifndef __ARM_PMU_H__ #define __ARM_PMU_H__ +#include <linux/interrupt.h> + enum arm_pmu_type { ARM_PMU_DEVICE_CPU = 0, ARM_NUM_PMU_DEVICES, }; +/* + * struct arm_pmu_platdata - ARM PMU platform data + * + * @handle_irq: an optional handler which will be called from the interrupt and + * passed the address of the low level handler, and can be used to implement + * any platform specific handling before or after calling it. + */ +struct arm_pmu_platdata { + irqreturn_t (*handle_irq)(int irq, void *dev, + irq_handler_t pmu_handler); +}; + #ifdef CONFIG_CPU_HAS_PMU /** diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 30ead135ff5..e59bbd496c3 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -75,6 +75,11 @@ void machine_crash_shutdown(struct pt_regs *regs) printk(KERN_INFO "Loading crashdump kernel...\n"); } +/* + * Function pointer to optional machine-specific reinitialization + */ +void (*kexec_reinit)(void); + void machine_kexec(struct kimage *image) { unsigned long page_list; @@ -104,6 +109,8 @@ void machine_kexec(struct kimage *image) (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE); printk(KERN_INFO "Bye!\n"); + if (kexec_reinit) + kexec_reinit(); local_irq_disable(); local_fiq_disable(); setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/ diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index d150ad1ccb5..22e194eb853 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -377,9 +377,18 @@ validate_group(struct perf_event *event) return 0; } +static irqreturn_t armpmu_platform_irq(int irq, void *dev) +{ + struct arm_pmu_platdata *plat = dev_get_platdata(&pmu_device->dev); + + return plat->handle_irq(irq, dev, armpmu->handle_irq); +} + static int armpmu_reserve_hardware(void) { + struct arm_pmu_platdata *plat; + irq_handler_t handle_irq; int i, err = -ENODEV, irq; pmu_device = reserve_pmu(ARM_PMU_DEVICE_CPU); @@ -390,6 +399,12 @@ armpmu_reserve_hardware(void) init_pmu(ARM_PMU_DEVICE_CPU); + plat = dev_get_platdata(&pmu_device->dev); + if (plat && plat->handle_irq) + handle_irq = armpmu_platform_irq; + else + handle_irq = armpmu->handle_irq; + if (pmu_device->num_resources < 1) { pr_err("no irqs for PMUs defined\n"); return -ENODEV; @@ -400,7 +415,7 @@ armpmu_reserve_hardware(void) if (irq < 0) continue; - err = request_irq(irq, armpmu->handle_irq, + err = request_irq(irq, handle_irq, IRQF_DISABLED | IRQF_NOBALANCING, "armpmu", NULL); if (err) { diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index b52a3a1abd9..8bc3701aa05 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -20,6 +20,8 @@ #include <linux/i2c/at24.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -30,6 +32,7 @@ #include <mach/da8xx.h> #include <mach/usb.h> #include <mach/aemif.h> +#include <mach/spi.h> #define DA830_EVM_PHY_ID "" /* @@ -534,6 +537,64 @@ static struct edma_rsv_info da830_edma_rsv[] = { }, }; +static struct mtd_partition da830evm_spiflash_part[] = { + [0] = { + .name = "DSP-UBL", + .offset = 0, + .size = SZ_8K, + .mask_flags = MTD_WRITEABLE, + }, + [1] = { + .name = "ARM-UBL", + .offset = MTDPART_OFS_APPEND, + .size = SZ_16K + SZ_8K, + .mask_flags = MTD_WRITEABLE, + }, + [2] = { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, + .size = SZ_256K - SZ_32K, + .mask_flags = MTD_WRITEABLE, + }, + [3] = { + .name = "U-Boot-Environment", + .offset = MTDPART_OFS_APPEND, + .size = SZ_16K, + .mask_flags = 0, + }, + [4] = { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + }, +}; + +static struct flash_platform_data da830evm_spiflash_data = { + .name = "m25p80", + .parts = da830evm_spiflash_part, + .nr_parts = ARRAY_SIZE(da830evm_spiflash_part), + .type = "w25x32", +}; + +static struct davinci_spi_config da830evm_spiflash_cfg = { + .io_type = SPI_IO_TYPE_DMA, + .c2tdelay = 8, + .t2cdelay = 8, +}; + +static struct spi_board_info da830evm_spi_info[] = { + { + .modalias = "m25p80", + .platform_data = &da830evm_spiflash_data, + .controller_data = &da830evm_spiflash_cfg, + .mode = SPI_MODE_0, + .max_speed_hz = 30000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + static __init void da830_evm_init(void) { struct davinci_soc_info *soc_info = &davinci_soc_info; @@ -590,6 +651,12 @@ static __init void da830_evm_init(void) ret = da8xx_register_rtc(); if (ret) pr_warning("da830_evm_init: rtc setup failed: %d\n", ret); + + ret = da8xx_register_spi(0, da830evm_spi_info, + ARRAY_SIZE(da830evm_spi_info)); + if (ret) + pr_warning("da830_evm_init: spi 0 registration failed: %d\n", + ret); } #ifdef CONFIG_SERIAL_8250_CONSOLE diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index b01fb2ab944..a7b41bf505f 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -29,6 +29,8 @@ #include <linux/regulator/machine.h> #include <linux/regulator/tps6507x.h> #include <linux/input/tps6507x-ts.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -38,6 +40,7 @@ #include <mach/nand.h> #include <mach/mux.h> #include <mach/aemif.h> +#include <mach/spi.h> #define DA850_EVM_PHY_ID "0:00" #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8) @@ -48,6 +51,70 @@ #define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6) +static struct mtd_partition da850evm_spiflash_part[] = { + [0] = { + .name = "UBL", + .offset = 0, + .size = SZ_64K, + .mask_flags = MTD_WRITEABLE, + }, + [1] = { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, + .size = SZ_512K, + .mask_flags = MTD_WRITEABLE, + }, + [2] = { + .name = "U-Boot-Env", + .offset = MTDPART_OFS_APPEND, + .size = SZ_64K, + .mask_flags = MTD_WRITEABLE, + }, + [3] = { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M + SZ_512K, + .mask_flags = 0, + }, + [4] = { + .name = "Filesystem", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, + [5] = { + .name = "MAC-Address", + .offset = SZ_8M - SZ_64K, + .size = SZ_64K, + .mask_flags = MTD_WRITEABLE, + }, +}; + +static struct flash_platform_data da850evm_spiflash_data = { + .name = "m25p80", + .parts = da850evm_spiflash_part, + .nr_parts = ARRAY_SIZE(da850evm_spiflash_part), + .type = "m25p64", +}; + +static struct davinci_spi_config da850evm_spiflash_cfg = { + .io_type = SPI_IO_TYPE_DMA, + .c2tdelay = 8, + .t2cdelay = 8, +}; + +static struct spi_board_info da850evm_spi_info[] = { + { + .modalias = "m25p80", + .platform_data = &da850evm_spiflash_data, + .controller_data = &da850evm_spiflash_cfg, + .mode = SPI_MODE_0, + .max_speed_hz = 30000000, + .bus_num = 1, + .chip_select = 0, + }, +}; + static struct mtd_partition da850_evm_norflash_partition[] = { { .name = "bootloaders + env", @@ -231,8 +298,6 @@ static const short da850_evm_nor_pins[] = { -1 }; -static u32 ui_card_detected; - #if defined(CONFIG_MMC_DAVINCI) || \ defined(CONFIG_MMC_DAVINCI_MODULE) #define HAS_MMC 1 @@ -244,7 +309,7 @@ static inline void da850_evm_setup_nor_nand(void) { int ret = 0; - if (ui_card_detected & !HAS_MMC) { + if (!HAS_MMC) { ret = davinci_cfg_reg_list(da850_evm_nand_pins); if (ret) pr_warning("da850_evm_init: nand mux setup failed: " @@ -394,7 +459,6 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio, goto exp_setup_keys_fail; } - ui_card_detected = 1; pr_info("DA850/OMAP-L138 EVM UI card detected\n"); da850_evm_setup_nor_nand(); @@ -664,6 +728,13 @@ static struct snd_platform_data da850_evm_snd_data = { .rxnumevt = 1, }; +static const short da850_evm_mcasp_pins[] __initconst = { + DA850_AHCLKX, DA850_ACLKX, DA850_AFSX, + DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE, + DA850_AXR_11, DA850_AXR_12, + -1 +}; + static int da850_evm_mmc_get_ro(int index) { return gpio_get_value(DA850_MMCSD_WP_PIN); @@ -683,6 +754,13 @@ static struct davinci_mmc_config da850_mmc_config = { .version = MMC_CTLR_VERSION_2, }; +static const short da850_evm_mmcsd0_pins[] __initconst = { + DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2, + DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD, + DA850_GPIO4_0, DA850_GPIO4_1, + -1 +}; + static void da850_panel_power_ctrl(int val) { /* lcd backlight */ @@ -1070,7 +1148,7 @@ static __init void da850_evm_init(void) ret); if (HAS_MMC) { - ret = davinci_cfg_reg_list(da850_mmcsd0_pins); + ret = davinci_cfg_reg_list(da850_evm_mmcsd0_pins); if (ret) pr_warning("da850_evm_init: mmcsd0 mux setup failed:" " %d\n", ret); @@ -1106,7 +1184,7 @@ static __init void da850_evm_init(void) __raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30); __raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30); - ret = davinci_cfg_reg_list(da850_mcasp_pins); + ret = davinci_cfg_reg_list(da850_evm_mcasp_pins); if (ret) pr_warning("da850_evm_init: mcasp mux setup failed: %d\n", ret); @@ -1153,6 +1231,12 @@ static __init void da850_evm_init(void) if (ret) pr_warning("da850_evm_init: suspend registration failed: %d\n", ret); + + ret = da8xx_register_spi(1, da850evm_spi_info, + ARRAY_SIZE(da850evm_spi_info)); + if (ret) + pr_warning("da850_evm_init: spi 1 registration failed: %d\n", + ret); } #ifdef CONFIG_SERIAL_8250_CONSOLE diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 0ca90b83458..556bbd468db 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -440,11 +440,6 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) gpio_request(gpio + 7, "nCF_SEL"); gpio_direction_output(gpio + 7, 1); - /* irlml6401 switches over 1A, in under 8 msec; - * now it can be managed by nDRV_VBUS ... - */ - davinci_setup_usb(1000, 8); - return 0; } @@ -705,6 +700,9 @@ static __init void davinci_evm_init(void) davinci_serial_init(&uart_config); dm644x_init_asp(&dm644x_evm_snd_data); + /* irlml6401 switches over 1A, in under 8 msec */ + davinci_setup_usb(1000, 8); + soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID; /* Register the fixup for PHY on DaVinci */ phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index 0bb5f0ce4fd..2aa79c54f98 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -17,6 +17,8 @@ #include <linux/i2c.h> #include <linux/i2c/at24.h> #include <linux/etherdevice.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -25,6 +27,7 @@ #include <mach/da8xx.h> #include <mach/nand.h> #include <mach/mux.h> +#include <mach/spi.h> #define MITYOMAPL138_PHY_ID "0:03" @@ -44,38 +47,109 @@ struct factory_config { static struct factory_config factory_config; +struct part_no_info { + const char *part_no; /* part number string of interest */ + int max_freq; /* khz */ +}; + +static struct part_no_info mityomapl138_pn_info[] = { + { + .part_no = "L138-C", + .max_freq = 300000, + }, + { + .part_no = "L138-D", + .max_freq = 375000, + }, + { + .part_no = "L138-F", + .max_freq = 456000, + }, + { + .part_no = "1808-C", + .max_freq = 300000, + }, + { + .part_no = "1808-D", + .max_freq = 375000, + }, + { + .part_no = "1808-F", + .max_freq = 456000, + }, + { + .part_no = "1810-D", + .max_freq = 375000, + }, +}; + +#ifdef CONFIG_CPU_FREQ +static void mityomapl138_cpufreq_init(const char *partnum) +{ + int i, ret; + + for (i = 0; partnum && i < ARRAY_SIZE(mityomapl138_pn_info); i++) { + /* + * the part number has additional characters beyond what is + * stored in the table. This information is not needed for + * determining the speed grade, and would require several + * more table entries. Only check the first N characters + * for a match. + */ + if (!strncmp(partnum, mityomapl138_pn_info[i].part_no, + strlen(mityomapl138_pn_info[i].part_no))) { + da850_max_speed = mityomapl138_pn_info[i].max_freq; + break; + } + } + + ret = da850_register_cpufreq("pll0_sysclk3"); + if (ret) + pr_warning("cpufreq registration failed: %d\n", ret); +} +#else +static void mityomapl138_cpufreq_init(const char *partnum) { } +#endif + static void read_factory_config(struct memory_accessor *a, void *context) { int ret; + const char *partnum = NULL; struct davinci_soc_info *soc_info = &davinci_soc_info; ret = a->read(a, (char *)&factory_config, 0, sizeof(factory_config)); if (ret != sizeof(struct factory_config)) { pr_warning("MityOMAPL138: Read Factory Config Failed: %d\n", ret); - return; + goto bad_config; } if (factory_config.magic != FACTORY_CONFIG_MAGIC) { pr_warning("MityOMAPL138: Factory Config Magic Wrong (%X)\n", factory_config.magic); - return; + goto bad_config; } if (factory_config.version != FACTORY_CONFIG_VERSION) { pr_warning("MityOMAPL138: Factory Config Version Wrong (%X)\n", factory_config.version); - return; + goto bad_config; } pr_info("MityOMAPL138: Found MAC = %pM\n", factory_config.mac); - pr_info("MityOMAPL138: Part Number = %s\n", factory_config.partnum); if (is_valid_ether_addr(factory_config.mac)) memcpy(soc_info->emac_pdata->mac_addr, factory_config.mac, ETH_ALEN); else pr_warning("MityOMAPL138: Invalid MAC found " "in factory config block\n"); + + partnum = factory_config.partnum; + pr_info("MityOMAPL138: Part Number = %s\n", partnum); + +bad_config: + /* default maximum speed is valid for all platforms */ + mityomapl138_cpufreq_init(partnum); } static struct at24_platform_data mityomapl138_fd_chip = { @@ -223,6 +297,82 @@ static int __init pmic_tps65023_init(void) } /* + * SPI Devices: + * SPI1_CS0: 8M Flash ST-M25P64-VME6G + */ +static struct mtd_partition spi_flash_partitions[] = { + [0] = { + .name = "ubl", + .offset = 0, + .size = SZ_64K, + .mask_flags = MTD_WRITEABLE, + }, + [1] = { + .name = "u-boot", + .offset = MTDPART_OFS_APPEND, + .size = SZ_512K, + .mask_flags = MTD_WRITEABLE, + }, + [2] = { + .name = "u-boot-env", + .offset = MTDPART_OFS_APPEND, + .size = SZ_64K, + .mask_flags = MTD_WRITEABLE, + }, + [3] = { + .name = "periph-config", + .offset = MTDPART_OFS_APPEND, + .size = SZ_64K, + .mask_flags = MTD_WRITEABLE, + }, + [4] = { + .name = "reserved", + .offset = MTDPART_OFS_APPEND, + .size = SZ_256K + SZ_64K, + }, + [5] = { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M + SZ_1M, + }, + [6] = { + .name = "fpga", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + }, + [7] = { + .name = "spare", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct flash_platform_data mityomapl138_spi_flash_data = { + .name = "m25p80", + .parts = spi_flash_partitions, + .nr_parts = ARRAY_SIZE(spi_flash_partitions), + .type = "m24p64", +}; + +static struct davinci_spi_config spi_eprom_config = { + .io_type = SPI_IO_TYPE_DMA, + .c2tdelay = 8, + .t2cdelay = 8, +}; + +static struct spi_board_info mityomapl138_spi_flash_info[] = { + { + .modalias = "m25p80", + .platform_data = &mityomapl138_spi_flash_data, + .controller_data = &spi_eprom_config, + .mode = SPI_MODE_0, + .max_speed_hz = 30000000, + .bus_num = 1, + .chip_select = 0, + }, +}; + +/* * MityDSP-L138 includes a 256 MByte large-page NAND flash * (128K blocks). */ @@ -377,16 +527,17 @@ static void __init mityomapl138_init(void) mityomapl138_setup_nand(); + ret = da8xx_register_spi(1, mityomapl138_spi_flash_info, + ARRAY_SIZE(mityomapl138_spi_flash_info)); + if (ret) + pr_warning("spi 1 registration failed: %d\n", ret); + mityomapl138_config_emac(); ret = da8xx_register_rtc(); if (ret) pr_warning("rtc setup failed: %d\n", ret); - ret = da850_register_cpufreq("pll0_sysclk3"); - if (ret) - pr_warning("cpufreq registration failed: %d\n", ret); - ret = da8xx_register_cpuidle(); if (ret) pr_warning("cpuidle registration failed: %d\n", ret); diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 0b8dbdb79fe..67c38d0ecd1 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -19,6 +19,279 @@ #include <mach/cp_intc.h> #include <mach/da8xx.h> +#include <mach/mux.h> + +#define HAWKBOARD_PHY_ID "0:07" +#define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12) +#define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13) + +#define DA850_USB1_VBUS_PIN GPIO_TO_PIN(2, 4) +#define DA850_USB1_OC_PIN GPIO_TO_PIN(6, 13) + +static short omapl138_hawk_mii_pins[] __initdata = { + DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3, + DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER, + DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3, + DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK, + DA850_MDIO_D, + -1 +}; + +static __init void omapl138_hawk_config_emac(void) +{ + void __iomem *cfgchip3 = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG); + int ret; + u32 val; + struct davinci_soc_info *soc_info = &davinci_soc_info; + + val = __raw_readl(cfgchip3); + val &= ~BIT(8); + ret = davinci_cfg_reg_list(omapl138_hawk_mii_pins); + if (ret) { + pr_warning("%s: cpgmac/mii mux setup failed: %d\n", + __func__, ret); + return; + } + + /* configure the CFGCHIP3 register for MII */ + __raw_writel(val, cfgchip3); + pr_info("EMAC: MII PHY configured\n"); + + soc_info->emac_pdata->phy_id = HAWKBOARD_PHY_ID; + + ret = da8xx_register_emac(); + if (ret) + pr_warning("%s: emac registration failed: %d\n", + __func__, ret); +} + +/* + * The following EDMA channels/slots are not being used by drivers (for + * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM/Hawkboard, + * hence they are being reserved for codecs on the DSP side. + */ +static const s16 da850_dma0_rsv_chans[][2] = { + /* (offset, number) */ + { 8, 6}, + {24, 4}, + {30, 2}, + {-1, -1} +}; + +static const s16 da850_dma0_rsv_slots[][2] = { + /* (offset, number) */ + { 8, 6}, + {24, 4}, + {30, 50}, + {-1, -1} +}; + +static const s16 da850_dma1_rsv_chans[][2] = { + /* (offset, number) */ + { 0, 28}, + {30, 2}, + {-1, -1} +}; + +static const s16 da850_dma1_rsv_slots[][2] = { + /* (offset, number) */ + { 0, 28}, + {30, 90}, + {-1, -1} +}; + +static struct edma_rsv_info da850_edma_cc0_rsv = { + .rsv_chans = da850_dma0_rsv_chans, + .rsv_slots = da850_dma0_rsv_slots, +}; + +static struct edma_rsv_info da850_edma_cc1_rsv = { + .rsv_chans = da850_dma1_rsv_chans, + .rsv_slots = da850_dma1_rsv_slots, +}; + +static struct edma_rsv_info *da850_edma_rsv[2] = { + &da850_edma_cc0_rsv, + &da850_edma_cc1_rsv, +}; + +static const short hawk_mmcsd0_pins[] = { + DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2, + DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD, + DA850_GPIO3_12, DA850_GPIO3_13, + -1 +}; + +static int da850_hawk_mmc_get_ro(int index) +{ + return gpio_get_value(DA850_HAWK_MMCSD_WP_PIN); +} + +static int da850_hawk_mmc_get_cd(int index) +{ + return !gpio_get_value(DA850_HAWK_MMCSD_CD_PIN); +} + +static struct davinci_mmc_config da850_mmc_config = { + .get_ro = da850_hawk_mmc_get_ro, + .get_cd = da850_hawk_mmc_get_cd, + .wires = 4, + .max_freq = 50000000, + .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, + .version = MMC_CTLR_VERSION_2, +}; + +static __init void omapl138_hawk_mmc_init(void) +{ + int ret; + + ret = davinci_cfg_reg_list(hawk_mmcsd0_pins); + if (ret) { + pr_warning("%s: MMC/SD0 mux setup failed: %d\n", + __func__, ret); + return; + } + + ret = gpio_request_one(DA850_HAWK_MMCSD_CD_PIN, + GPIOF_DIR_IN, "MMC CD"); + if (ret < 0) { + pr_warning("%s: can not open GPIO %d\n", + __func__, DA850_HAWK_MMCSD_CD_PIN); + return; + } + + ret = gpio_request_one(DA850_HAWK_MMCSD_WP_PIN, + GPIOF_DIR_IN, "MMC WP"); + if (ret < 0) { + pr_warning("%s: can not open GPIO %d\n", + __func__, DA850_HAWK_MMCSD_WP_PIN); + goto mmc_setup_wp_fail; + } + + ret = da8xx_register_mmcsd0(&da850_mmc_config); + if (ret) { + pr_warning("%s: MMC/SD0 registration failed: %d\n", + __func__, ret); + goto mmc_setup_mmcsd_fail; + } + + return; + +mmc_setup_mmcsd_fail: + gpio_free(DA850_HAWK_MMCSD_WP_PIN); +mmc_setup_wp_fail: + gpio_free(DA850_HAWK_MMCSD_CD_PIN); +} + +static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id); +static da8xx_ocic_handler_t hawk_usb_ocic_handler; + +static const short da850_hawk_usb11_pins[] = { + DA850_GPIO2_4, DA850_GPIO6_13, + -1 +}; + +static int hawk_usb_set_power(unsigned port, int on) +{ + gpio_set_value(DA850_USB1_VBUS_PIN, on); + return 0; +} + +static int hawk_usb_get_power(unsigned port) +{ + return gpio_get_value(DA850_USB1_VBUS_PIN); +} + +static int hawk_usb_get_oci(unsigned port) +{ + return !gpio_get_value(DA850_USB1_OC_PIN); +} + +static int hawk_usb_ocic_notify(da8xx_ocic_handler_t handler) +{ + int irq = gpio_to_irq(DA850_USB1_OC_PIN); + int error = 0; + + if (handler != NULL) { + hawk_usb_ocic_handler = handler; + + error = request_irq(irq, omapl138_hawk_usb_ocic_irq, + IRQF_DISABLED | IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, + "OHCI over-current indicator", NULL); + if (error) + pr_err("%s: could not request IRQ to watch " + "over-current indicator changes\n", __func__); + } else { + free_irq(irq, NULL); + } + return error; +} + +static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = { + .set_power = hawk_usb_set_power, + .get_power = hawk_usb_get_power, + .get_oci = hawk_usb_get_oci, + .ocic_notify = hawk_usb_ocic_notify, + /* TPS2087 switch @ 5V */ + .potpgt = (3 + 1) / 2, /* 3 ms max */ +}; + +static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id) +{ + hawk_usb_ocic_handler(&omapl138_hawk_usb11_pdata, 1); + return IRQ_HANDLED; +} + +static __init void omapl138_hawk_usb_init(void) +{ + int ret; + u32 cfgchip2; + + ret = davinci_cfg_reg_list(da850_hawk_usb11_pins); + if (ret) { + pr_warning("%s: USB 1.1 PinMux setup failed: %d\n", + __func__, ret); + return; + } + + /* Setup the Ref. clock frequency for the HAWK at 24 MHz. */ + + cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); + cfgchip2 &= ~CFGCHIP2_REFFREQ; + cfgchip2 |= CFGCHIP2_REFFREQ_24MHZ; + __raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); + + ret = gpio_request_one(DA850_USB1_VBUS_PIN, + GPIOF_DIR_OUT, "USB1 VBUS"); + if (ret < 0) { + pr_err("%s: failed to request GPIO for USB 1.1 port " + "power control: %d\n", __func__, ret); + return; + } + + ret = gpio_request_one(DA850_USB1_OC_PIN, + GPIOF_DIR_IN, "USB1 OC"); + if (ret < 0) { + pr_err("%s: failed to request GPIO for USB 1.1 port " + "over-current indicator: %d\n", __func__, ret); + goto usb11_setup_oc_fail; + } + + ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata); + if (ret) { + pr_warning("%s: USB 1.1 registration failed: %d\n", + __func__, ret); + goto usb11_setup_fail; + } + + return; + +usb11_setup_fail: + gpio_free(DA850_USB1_OC_PIN); +usb11_setup_oc_fail: + gpio_free(DA850_USB1_VBUS_PIN); +} static struct davinci_uart_config omapl138_hawk_uart_config __initdata = { .enabled_uarts = 0x7, @@ -30,6 +303,17 @@ static __init void omapl138_hawk_init(void) davinci_serial_init(&omapl138_hawk_uart_config); + omapl138_hawk_config_emac(); + + ret = da850_register_edma(da850_edma_rsv); + if (ret) + pr_warning("%s: EDMA registration failed: %d\n", + __func__, ret); + + omapl138_hawk_mmc_init(); + + omapl138_hawk_usb_init(); + ret = da8xx_register_watchdog(); if (ret) pr_warning("omapl138_hawk_init: " diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c index a6db8546022..1a656e88226 100644 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -25,6 +25,7 @@ #include <linux/mtd/partitions.h> #include <linux/input.h> #include <linux/input/matrix_keypad.h> +#include <linux/spi/spi.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -37,6 +38,7 @@ #define EVM_MMC_WP_GPIO 21 #define EVM_MMC_CD_GPIO 24 +#define EVM_SPI_CS_GPIO 54 static int initialize_gpio(int gpio, char *desc) { @@ -99,6 +101,12 @@ static const short uart1_pins[] __initdata = { -1 }; +static const short ssp_pins[] __initdata = { + TNETV107X_SSP0_0, TNETV107X_SSP0_1, TNETV107X_SSP0_2, + TNETV107X_SSP1_0, TNETV107X_SSP1_1, TNETV107X_SSP1_2, + TNETV107X_SSP1_3, -1 +}; + static struct mtd_partition nand_partitions[] = { /* bootloader (U-Boot, etc) in first 12 sectors */ { @@ -196,19 +204,68 @@ static struct matrix_keypad_platform_data keypad_config = { .no_autorepeat = 0, }; +static void spi_select_device(int cs) +{ + static int gpio; + + if (!gpio) { + int ret; + ret = gpio_request(EVM_SPI_CS_GPIO, "spi chipsel"); + if (ret < 0) { + pr_err("cannot open spi chipsel gpio\n"); + gpio = -ENOSYS; + return; + } else { + gpio = EVM_SPI_CS_GPIO; + gpio_direction_output(gpio, 0); + } + } + + if (gpio < 0) + return; + + return gpio_set_value(gpio, cs ? 1 : 0); +} + +static struct ti_ssp_spi_data spi_master_data = { + .num_cs = 2, + .select = spi_select_device, + .iosel = SSP_PIN_SEL(0, SSP_CLOCK) | SSP_PIN_SEL(1, SSP_DATA) | + SSP_PIN_SEL(2, SSP_CHIPSEL) | SSP_PIN_SEL(3, SSP_IN) | + SSP_INPUT_SEL(3), +}; + +static struct ti_ssp_data ssp_config = { + .out_clock = 250 * 1000, + .dev_data = { + [1] = { + .dev_name = "ti-ssp-spi", + .pdata = &spi_master_data, + .pdata_size = sizeof(spi_master_data), + }, + }, +}; + static struct tnetv107x_device_info evm_device_info __initconst = { .serial_config = &serial_config, .mmc_config[1] = &mmc_config, /* controller 1 */ .nand_config[0] = &nand_config, /* chip select 0 */ .keypad_config = &keypad_config, + .ssp_config = &ssp_config, +}; + +static struct spi_board_info spi_info[] __initconst = { }; static __init void tnetv107x_evm_board_init(void) { davinci_cfg_reg_list(sdio1_pins); davinci_cfg_reg_list(uart1_pins); + davinci_cfg_reg_list(ssp_pins); tnetv107x_devices_init(&evm_device_info); + + spi_register_board_info(spi_info, ARRAY_SIZE(spi_info)); } #ifdef CONFIG_SERIAL_8250_CONSOLE diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index ec23ab47362..2ed2f822fc4 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -148,7 +148,7 @@ static struct clk scr2_ss_clk = { static struct clk dmax_clk = { .name = "dmax", .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_DMAX, + .lpsc = DA8XX_LPSC0_PRUSS, .flags = ALWAYS_ENABLED, }; @@ -397,8 +397,8 @@ static struct clk_lookup da830_clks[] = { CLK(NULL, "uart0", &uart0_clk), CLK(NULL, "uart1", &uart1_clk), CLK(NULL, "uart2", &uart2_clk), - CLK("dm_spi.0", NULL, &spi0_clk), - CLK("dm_spi.1", NULL, &spi1_clk), + CLK("spi_davinci.0", NULL, &spi0_clk), + CLK("spi_davinci.1", NULL, &spi1_clk), CLK(NULL, "ecap0", &ecap0_clk), CLK(NULL, "ecap1", &ecap1_clk), CLK(NULL, "ecap2", &ecap2_clk), diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 78b5ae29ae4..68fe4c289d7 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -345,6 +345,34 @@ static struct clk aemif_clk = { .flags = ALWAYS_ENABLED, }; +static struct clk usb11_clk = { + .name = "usb11", + .parent = &pll0_sysclk4, + .lpsc = DA8XX_LPSC1_USB11, + .gpsc = 1, +}; + +static struct clk usb20_clk = { + .name = "usb20", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_USB20, + .gpsc = 1, +}; + +static struct clk spi0_clk = { + .name = "spi0", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC0_SPI0, +}; + +static struct clk spi1_clk = { + .name = "spi1", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_SPI1, + .gpsc = 1, + .flags = DA850_CLK_ASYNC3, +}; + static struct clk_lookup da850_clks[] = { CLK(NULL, "ref", &ref_clk), CLK(NULL, "pll0", &pll0_clk), @@ -387,6 +415,10 @@ static struct clk_lookup da850_clks[] = { CLK("davinci_mmc.0", NULL, &mmcsd0_clk), CLK("davinci_mmc.1", NULL, &mmcsd1_clk), CLK(NULL, "aemif", &aemif_clk), + CLK(NULL, "usb11", &usb11_clk), + CLK(NULL, "usb20", &usb20_clk), + CLK("spi_davinci.0", NULL, &spi0_clk), + CLK("spi_davinci.1", NULL, &spi1_clk), CLK(NULL, NULL, NULL), }; @@ -543,30 +575,19 @@ static const struct mux_config da850_pins[] = { MUX_CFG(DA850, EMA_WAIT_1, 6, 24, 15, 1, false) MUX_CFG(DA850, NEMA_CS_2, 7, 0, 15, 1, false) /* GPIO function */ + MUX_CFG(DA850, GPIO2_4, 6, 12, 15, 8, false) MUX_CFG(DA850, GPIO2_6, 6, 4, 15, 8, false) MUX_CFG(DA850, GPIO2_8, 5, 28, 15, 8, false) MUX_CFG(DA850, GPIO2_15, 5, 0, 15, 8, false) + MUX_CFG(DA850, GPIO3_12, 7, 12, 15, 8, false) + MUX_CFG(DA850, GPIO3_13, 7, 8, 15, 8, false) MUX_CFG(DA850, GPIO4_0, 10, 28, 15, 8, false) MUX_CFG(DA850, GPIO4_1, 10, 24, 15, 8, false) + MUX_CFG(DA850, GPIO6_13, 13, 8, 15, 8, false) MUX_CFG(DA850, RTC_ALARM, 0, 28, 15, 2, false) #endif }; -const short da850_uart0_pins[] __initdata = { - DA850_NUART0_CTS, DA850_NUART0_RTS, DA850_UART0_RXD, DA850_UART0_TXD, - -1 -}; - -const short da850_uart1_pins[] __initdata = { - DA850_UART1_RXD, DA850_UART1_TXD, - -1 -}; - -const short da850_uart2_pins[] __initdata = { - DA850_UART2_RXD, DA850_UART2_TXD, - -1 -}; - const short da850_i2c0_pins[] __initdata = { DA850_I2C0_SDA, DA850_I2C0_SCL, -1 @@ -577,24 +598,6 @@ const short da850_i2c1_pins[] __initdata = { -1 }; -const short da850_cpgmac_pins[] __initdata = { - DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3, - DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER, - DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3, - DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK, - DA850_MDIO_D, DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN, - DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1, DA850_RMII_RXER, - DA850_RMII_MHZ_50_CLK, - -1 -}; - -const short da850_mcasp_pins[] __initdata = { - DA850_AHCLKX, DA850_ACLKX, DA850_AFSX, - DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE, - DA850_AXR_11, DA850_AXR_12, - -1 -}; - const short da850_lcdcntl_pins[] __initdata = { DA850_LCD_D_0, DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3, DA850_LCD_D_4, DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7, @@ -604,29 +607,6 @@ const short da850_lcdcntl_pins[] __initdata = { -1 }; -const short da850_mmcsd0_pins[] __initdata = { - DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2, - DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD, - DA850_GPIO4_0, DA850_GPIO4_1, - -1 -}; - -const short da850_emif25_pins[] __initdata = { - DA850_EMA_BA_1, DA850_EMA_CLK, DA850_EMA_WAIT_1, DA850_NEMA_CS_2, - DA850_NEMA_CS_3, DA850_NEMA_CS_4, DA850_NEMA_WE, DA850_NEMA_OE, - DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3, - DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7, - DA850_EMA_D_8, DA850_EMA_D_9, DA850_EMA_D_10, DA850_EMA_D_11, - DA850_EMA_D_12, DA850_EMA_D_13, DA850_EMA_D_14, DA850_EMA_D_15, - DA850_EMA_A_0, DA850_EMA_A_1, DA850_EMA_A_2, DA850_EMA_A_3, - DA850_EMA_A_4, DA850_EMA_A_5, DA850_EMA_A_6, DA850_EMA_A_7, - DA850_EMA_A_8, DA850_EMA_A_9, DA850_EMA_A_10, DA850_EMA_A_11, - DA850_EMA_A_12, DA850_EMA_A_13, DA850_EMA_A_14, DA850_EMA_A_15, - DA850_EMA_A_16, DA850_EMA_A_17, DA850_EMA_A_18, DA850_EMA_A_19, - DA850_EMA_A_20, DA850_EMA_A_21, DA850_EMA_A_22, DA850_EMA_A_23, - -1 -}; - /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = { [IRQ_DA8XX_COMMTX] = 7, @@ -764,6 +744,13 @@ static struct davinci_id da850_ids[] = { .cpu_id = DAVINCI_CPU_ID_DA850, .name = "da850/omap-l138", }, + { + .variant = 0x1, + .part_no = 0xb7d1, + .manufacturer = 0x017, /* 0x02f >> 1 */ + .cpu_id = DAVINCI_CPU_ID_DA850, + .name = "da850/omap-l138/am18x", + }, }; static struct davinci_timer_instance da850_timer_instance[4] = { diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index beda8a4133a..625d4b66718 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -38,12 +38,23 @@ #define DA8XX_EMAC_MDIO_BASE 0x01e24000 #define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_I2C1_BASE 0x01e28000 +#define DA8XX_SPI0_BASE 0x01c41000 +#define DA8XX_SPI1_BASE 0x01f0e000 #define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000 #define DA8XX_EMAC_MOD_REG_OFFSET 0x2000 #define DA8XX_EMAC_RAM_OFFSET 0x0000 #define DA8XX_EMAC_CTRL_RAM_SIZE SZ_8K +#define DA8XX_DMA_SPI0_RX EDMA_CTLR_CHAN(0, 14) +#define DA8XX_DMA_SPI0_TX EDMA_CTLR_CHAN(0, 15) +#define DA8XX_DMA_MMCSD0_RX EDMA_CTLR_CHAN(0, 16) +#define DA8XX_DMA_MMCSD0_TX EDMA_CTLR_CHAN(0, 17) +#define DA8XX_DMA_SPI1_RX EDMA_CTLR_CHAN(0, 18) +#define DA8XX_DMA_SPI1_TX EDMA_CTLR_CHAN(0, 19) +#define DA850_DMA_MMCSD1_RX EDMA_CTLR_CHAN(1, 28) +#define DA850_DMA_MMCSD1_TX EDMA_CTLR_CHAN(1, 29) + void __iomem *da8xx_syscfg0_base; void __iomem *da8xx_syscfg1_base; @@ -573,13 +584,13 @@ static struct resource da8xx_mmcsd0_resources[] = { .flags = IORESOURCE_IRQ, }, { /* DMA RX */ - .start = EDMA_CTLR_CHAN(0, 16), - .end = EDMA_CTLR_CHAN(0, 16), + .start = DA8XX_DMA_MMCSD0_RX, + .end = DA8XX_DMA_MMCSD0_RX, .flags = IORESOURCE_DMA, }, { /* DMA TX */ - .start = EDMA_CTLR_CHAN(0, 17), - .end = EDMA_CTLR_CHAN(0, 17), + .start = DA8XX_DMA_MMCSD0_TX, + .end = DA8XX_DMA_MMCSD0_TX, .flags = IORESOURCE_DMA, }, }; @@ -610,13 +621,13 @@ static struct resource da850_mmcsd1_resources[] = { .flags = IORESOURCE_IRQ, }, { /* DMA RX */ - .start = EDMA_CTLR_CHAN(1, 28), - .end = EDMA_CTLR_CHAN(1, 28), + .start = DA850_DMA_MMCSD1_RX, + .end = DA850_DMA_MMCSD1_RX, .flags = IORESOURCE_DMA, }, { /* DMA TX */ - .start = EDMA_CTLR_CHAN(1, 29), - .end = EDMA_CTLR_CHAN(1, 29), + .start = DA850_DMA_MMCSD1_TX, + .end = DA850_DMA_MMCSD1_TX, .flags = IORESOURCE_DMA, }, }; @@ -725,3 +736,101 @@ int __init da8xx_register_cpuidle(void) return platform_device_register(&da8xx_cpuidle_device); } + +static struct resource da8xx_spi0_resources[] = { + [0] = { + .start = DA8XX_SPI0_BASE, + .end = DA8XX_SPI0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_DA8XX_SPINT0, + .end = IRQ_DA8XX_SPINT0, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = DA8XX_DMA_SPI0_RX, + .end = DA8XX_DMA_SPI0_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DA8XX_DMA_SPI0_TX, + .end = DA8XX_DMA_SPI0_TX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct resource da8xx_spi1_resources[] = { + [0] = { + .start = DA8XX_SPI1_BASE, + .end = DA8XX_SPI1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_DA8XX_SPINT1, + .end = IRQ_DA8XX_SPINT1, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = DA8XX_DMA_SPI1_RX, + .end = DA8XX_DMA_SPI1_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DA8XX_DMA_SPI1_TX, + .end = DA8XX_DMA_SPI1_TX, + .flags = IORESOURCE_DMA, + }, +}; + +struct davinci_spi_platform_data da8xx_spi_pdata[] = { + [0] = { + .version = SPI_VERSION_2, + .intr_line = 1, + .dma_event_q = EVENTQ_0, + }, + [1] = { + .version = SPI_VERSION_2, + .intr_line = 1, + .dma_event_q = EVENTQ_0, + }, +}; + +static struct platform_device da8xx_spi_device[] = { + [0] = { + .name = "spi_davinci", + .id = 0, + .num_resources = ARRAY_SIZE(da8xx_spi0_resources), + .resource = da8xx_spi0_resources, + .dev = { + .platform_data = &da8xx_spi_pdata[0], + }, + }, + [1] = { + .name = "spi_davinci", + .id = 1, + .num_resources = ARRAY_SIZE(da8xx_spi1_resources), + .resource = da8xx_spi1_resources, + .dev = { + .platform_data = &da8xx_spi_pdata[1], + }, + }, +}; + +int __init da8xx_register_spi(int instance, struct spi_board_info *info, + unsigned len) +{ + int ret; + + if (instance < 0 || instance > 1) + return -EINVAL; + + ret = spi_register_board_info(info, len); + if (ret) + pr_warning("%s: failed to register board info for spi %d :" + " %d\n", __func__, instance, ret); + + da8xx_spi_pdata[instance].num_chipselect = len; + + return platform_device_register(&da8xx_spi_device[instance]); +} diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c index 85503debda5..6162cae7f86 100644 --- a/arch/arm/mach-davinci/devices-tnetv107x.c +++ b/arch/arm/mach-davinci/devices-tnetv107x.c @@ -35,6 +35,7 @@ #define TNETV107X_SDIO0_BASE 0x08088700 #define TNETV107X_SDIO1_BASE 0x08088800 #define TNETV107X_KEYPAD_BASE 0x08088a00 +#define TNETV107X_SSP_BASE 0x08088c00 #define TNETV107X_ASYNC_EMIF_CNTRL_BASE 0x08200000 #define TNETV107X_ASYNC_EMIF_DATA_CE0_BASE 0x30000000 #define TNETV107X_ASYNC_EMIF_DATA_CE1_BASE 0x40000000 @@ -342,6 +343,25 @@ static struct platform_device tsc_device = { .resource = tsc_resources, }; +static struct resource ssp_resources[] = { + { + .start = TNETV107X_SSP_BASE, + .end = TNETV107X_SSP_BASE + 0x1ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_TNETV107X_SSP, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ssp_device = { + .name = "ti-ssp", + .id = -1, + .num_resources = ARRAY_SIZE(ssp_resources), + .resource = ssp_resources, +}; + void __init tnetv107x_devices_init(struct tnetv107x_device_info *info) { int i, error; @@ -380,4 +400,9 @@ void __init tnetv107x_devices_init(struct tnetv107x_device_info *info) keypad_device.dev.platform_data = info->keypad_config; platform_device_register(&keypad_device); } + + if (info->ssp_config) { + ssp_device.dev.platform_data = info->ssp_config; + platform_device_register(&ssp_device); + } } diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index a5f8a80c1f2..76364d1345d 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -403,16 +403,13 @@ static struct resource dm355_spi0_resources[] = { .start = 16, .flags = IORESOURCE_DMA, }, - { - .start = EVENTQ_1, - .flags = IORESOURCE_DMA, - }, }; static struct davinci_spi_platform_data dm355_spi0_pdata = { .version = SPI_VERSION_1, .num_chipselect = 2, .cshold_bug = true, + .dma_event_q = EVENTQ_1, }; static struct platform_device dm355_spi0_device = { .name = "spi_davinci", diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 02d2cc380df..4604e72d7d9 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -625,6 +625,7 @@ static u64 dm365_spi0_dma_mask = DMA_BIT_MASK(32); static struct davinci_spi_platform_data dm365_spi0_pdata = { .version = SPI_VERSION_1, .num_chipselect = 2, + .dma_event_q = EVENTQ_3, }; static struct resource dm365_spi0_resources[] = { @@ -645,10 +646,6 @@ static struct resource dm365_spi0_resources[] = { .start = 16, .flags = IORESOURCE_DMA, }, - { - .start = EVENTQ_3, - .flags = IORESOURCE_DMA, - }, }; static struct platform_device dm365_spi0_device = { diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index e7f95206652..e4fc1af8500 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -15,6 +15,7 @@ #include <linux/platform_device.h> #include <linux/davinci_emac.h> +#include <linux/spi/spi.h> #include <mach/serial.h> #include <mach/edma.h> @@ -23,6 +24,7 @@ #include <mach/mmc.h> #include <mach/usb.h> #include <mach/pm.h> +#include <mach/spi.h> extern void __iomem *da8xx_syscfg0_base; extern void __iomem *da8xx_syscfg1_base; @@ -77,6 +79,7 @@ void __init da850_init(void); int da830_register_edma(struct edma_rsv_info *rsv); int da850_register_edma(struct edma_rsv_info *rsv[2]); int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata); +int da8xx_register_spi(int instance, struct spi_board_info *info, unsigned len); int da8xx_register_watchdog(void); int da8xx_register_usb20(unsigned mA, unsigned potpgt); int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata); @@ -95,6 +98,7 @@ extern struct platform_device da8xx_serial_device; extern struct emac_platform_data da8xx_emac_pdata; extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata; extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata; +extern struct davinci_spi_platform_data da8xx_spi_pdata[]; extern struct platform_device da8xx_wdt_device; @@ -123,15 +127,8 @@ extern const short da830_ecap2_pins[]; extern const short da830_eqep0_pins[]; extern const short da830_eqep1_pins[]; -extern const short da850_uart0_pins[]; -extern const short da850_uart1_pins[]; -extern const short da850_uart2_pins[]; extern const short da850_i2c0_pins[]; extern const short da850_i2c1_pins[]; -extern const short da850_cpgmac_pins[]; -extern const short da850_mcasp_pins[]; extern const short da850_lcdcntl_pins[]; -extern const short da850_mmcsd0_pins[]; -extern const short da850_emif25_pins[]; #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */ diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h index dc10ef6cf57..20c77f29bf0 100644 --- a/arch/arm/mach-davinci/include/mach/edma.h +++ b/arch/arm/mach-davinci/include/mach/edma.h @@ -151,42 +151,6 @@ struct edmacc_param { #define DA830_DMACH2EVENT_MAP1 0x00000000u #define DA830_EDMA_ARM_OWN 0x30FFCCFFu -/* DA830 specific EDMA3 Events Information */ -enum DA830_edma_ch { - DA830_DMACH_MCASP0_RX, - DA830_DMACH_MCASP0_TX, - DA830_DMACH_MCASP1_RX, - DA830_DMACH_MCASP1_TX, - DA830_DMACH_MCASP2_RX, - DA830_DMACH_MCASP2_TX, - DA830_DMACH_GPIO_BNK0INT, - DA830_DMACH_GPIO_BNK1INT, - DA830_DMACH_UART0_RX, - DA830_DMACH_UART0_TX, - DA830_DMACH_TMR64P0_EVTOUT12, - DA830_DMACH_TMR64P0_EVTOUT34, - DA830_DMACH_UART1_RX, - DA830_DMACH_UART1_TX, - DA830_DMACH_SPI0_RX, - DA830_DMACH_SPI0_TX, - DA830_DMACH_MMCSD_RX, - DA830_DMACH_MMCSD_TX, - DA830_DMACH_SPI1_RX, - DA830_DMACH_SPI1_TX, - DA830_DMACH_DMAX_EVTOUT6, - DA830_DMACH_DMAX_EVTOUT7, - DA830_DMACH_GPIO_BNK2INT, - DA830_DMACH_GPIO_BNK3INT, - DA830_DMACH_I2C0_RX, - DA830_DMACH_I2C0_TX, - DA830_DMACH_I2C1_RX, - DA830_DMACH_I2C1_TX, - DA830_DMACH_GPIO_BNK4INT, - DA830_DMACH_GPIO_BNK5INT, - DA830_DMACH_UART2_RX, - DA830_DMACH_UART2_TX -}; - /*ch_status paramater of callback function possible values*/ #define DMA_COMPLETE 1 #define DMA_CC_ERROR 2 diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index de11aac76a8..5d4e0fed828 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -908,11 +908,15 @@ enum davinci_da850_index { DA850_NEMA_CS_2, /* GPIO function */ + DA850_GPIO2_4, DA850_GPIO2_6, DA850_GPIO2_8, DA850_GPIO2_15, + DA850_GPIO3_12, + DA850_GPIO3_13, DA850_GPIO4_0, DA850_GPIO4_1, + DA850_GPIO6_13, DA850_RTC_ALARM, }; diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 62b0858f68c..a47e6f29206 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -150,7 +150,7 @@ #define DA8XX_LPSC0_SCR0_SS 10 #define DA8XX_LPSC0_SCR1_SS 11 #define DA8XX_LPSC0_SCR2_SS 12 -#define DA8XX_LPSC0_DMAX 13 +#define DA8XX_LPSC0_PRUSS 13 #define DA8XX_LPSC0_ARM 14 #define DA8XX_LPSC0_GEM 15 diff --git a/arch/arm/mach-davinci/include/mach/spi.h b/arch/arm/mach-davinci/include/mach/spi.h index 38f4da5ca13..7af305b3786 100644 --- a/arch/arm/mach-davinci/include/mach/spi.h +++ b/arch/arm/mach-davinci/include/mach/spi.h @@ -19,6 +19,8 @@ #ifndef __ARCH_ARM_DAVINCI_SPI_H #define __ARCH_ARM_DAVINCI_SPI_H +#include <mach/edma.h> + #define SPI_INTERN_CS 0xFF enum { @@ -39,13 +41,16 @@ enum { * to populate if all chip-selects are internal. * @cshold_bug: set this to true if the SPI controller on your chip requires * a write to CSHOLD bit in between transfers (like in DM355). + * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any + * device on the bus. */ struct davinci_spi_platform_data { - u8 version; - u8 num_chipselect; - u8 intr_line; - u8 *chip_sel; - bool cshold_bug; + u8 version; + u8 num_chipselect; + u8 intr_line; + u8 *chip_sel; + bool cshold_bug; + enum dma_event_q dma_event_q; }; /** diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h index 5a681d880dc..89c1fdc63c0 100644 --- a/arch/arm/mach-davinci/include/mach/tnetv107x.h +++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h @@ -34,6 +34,7 @@ #include <linux/serial_8250.h> #include <linux/input/matrix_keypad.h> +#include <linux/mfd/ti_ssp.h> #include <mach/mmc.h> #include <mach/nand.h> @@ -44,6 +45,7 @@ struct tnetv107x_device_info { struct davinci_mmc_config *mmc_config[2]; /* 2 controllers */ struct davinci_nand_pdata *nand_config[4]; /* 4 chipsels */ struct matrix_keypad_platform_data *keypad_config; + struct ti_ssp_data *ssp_config; }; extern struct platform_device tnetv107x_wdt_device; diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c index 6fcdecec8d8..1b28fdd892a 100644 --- a/arch/arm/mach-davinci/tnetv107x.c +++ b/arch/arm/mach-davinci/tnetv107x.c @@ -278,7 +278,7 @@ static struct clk_lookup clks[] = { CLK(NULL, "timer1", &clk_timer1), CLK("tnetv107x_wdt.0", NULL, &clk_wdt_arm), CLK(NULL, "clk_wdt_dsp", &clk_wdt_dsp), - CLK("ti-ssp.0", NULL, &clk_ssp), + CLK("ti-ssp", NULL, &clk_ssp), CLK(NULL, "clk_tdm0", &clk_tdm0), CLK(NULL, "clk_vlynq", &clk_vlynq), CLK(NULL, "clk_mcdma", &clk_mcdma), diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c index 96e0e94e5fa..03e11f9dca9 100644 --- a/arch/arm/mach-dove/cm-a510.c +++ b/arch/arm/mach-dove/cm-a510.c @@ -90,6 +90,7 @@ MACHINE_START(CM_A510, "Compulab CM-A510 Board") .boot_params = 0x00000100, .init_machine = cm_a510_init, .map_io = dove_map_io, + .init_early = dove_init_early, .init_irq = dove_init_irq, .timer = &dove_timer, MACHINE_END diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index fe627aba6da..e06a88f1f81 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -532,6 +532,11 @@ void __init dove_i2c_init(void) /***************************************************************************** * Time handling ****************************************************************************/ +void __init dove_init_early(void) +{ + orion_time_set_base(TIMER_VIRT_BASE); +} + static int get_tclk(void) { /* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */ @@ -540,7 +545,8 @@ static int get_tclk(void) static void dove_timer_init(void) { - orion_time_init(IRQ_DOVE_BRIDGE, get_tclk()); + orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, + IRQ_DOVE_BRIDGE, get_tclk()); } struct sys_timer dove_timer = { diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h index a51517c3fe7..6a2046e4470 100644 --- a/arch/arm/mach-dove/common.h +++ b/arch/arm/mach-dove/common.h @@ -22,6 +22,7 @@ extern struct mbus_dram_target_info dove_mbus_dram_info; */ void dove_map_io(void); void dove_init(void); +void dove_init_early(void); void dove_init_irq(void); void dove_setup_cpu_mbus(void); void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data); diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c index 95925aa76dd..2ac34ecfa74 100644 --- a/arch/arm/mach-dove/dove-db-setup.c +++ b/arch/arm/mach-dove/dove-db-setup.c @@ -97,6 +97,7 @@ MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board") .boot_params = 0x00000100, .init_machine = dove_db_init, .map_io = dove_map_io, + .init_early = dove_init_early, .init_irq = dove_init_irq, .timer = &dove_timer, MACHINE_END diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h index 214a4c31f06..226949dc4ac 100644 --- a/arch/arm/mach-dove/include/mach/bridge-regs.h +++ b/arch/arm/mach-dove/include/mach/bridge-regs.h @@ -26,10 +26,6 @@ #define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) #define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 #define BRIDGE_INT_TIMER1_CLR (~0x0004) #define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h index 27b414578f2..e5fcdd3f5bf 100644 --- a/arch/arm/mach-dove/include/mach/dove.h +++ b/arch/arm/mach-dove/include/mach/dove.h @@ -130,7 +130,8 @@ #define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10) #define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE | 0x014) #define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE | 0x018) -#define DOVE_GPIO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400) +#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400) +#define DOVE_GPIO_HI_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0420) #define DOVE_GPIO2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe8400) #define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c) #define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1) diff --git a/arch/arm/mach-dove/include/mach/gpio.h b/arch/arm/mach-dove/include/mach/gpio.h index 340bb7af529..e7e5101e35a 100644 --- a/arch/arm/mach-dove/include/mach/gpio.h +++ b/arch/arm/mach-dove/include/mach/gpio.h @@ -6,46 +6,4 @@ * warranty of any kind, whether express or implied. */ -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -#include <asm/errno.h> -#include <mach/irqs.h> #include <plat/gpio.h> -#include <asm-generic/gpio.h> /* cansleep wrappers */ - -#define GPIO_MAX 72 - -#define GPIO_BASE_LO (DOVE_GPIO_VIRT_BASE + 0x00) -#define GPIO_BASE_HI (DOVE_GPIO_VIRT_BASE + 0x20) - -#define GPIO_BASE(pin) ((pin < 32) ? GPIO_BASE_LO : \ - ((pin < 64) ? GPIO_BASE_HI : \ - DOVE_GPIO2_VIRT_BASE)) - -#define GPIO_OUT(pin) (GPIO_BASE(pin) + 0x00) -#define GPIO_IO_CONF(pin) (GPIO_BASE(pin) + 0x04) -#define GPIO_BLINK_EN(pin) (GPIO_BASE(pin) + 0x08) -#define GPIO_IN_POL(pin) (GPIO_BASE(pin) + 0x0c) -#define GPIO_DATA_IN(pin) (GPIO_BASE(pin) + 0x10) -#define GPIO_EDGE_CAUSE(pin) (GPIO_BASE(pin) + 0x14) -#define GPIO_EDGE_MASK(pin) (GPIO_BASE(pin) + 0x18) -#define GPIO_LEVEL_MASK(pin) (GPIO_BASE(pin) + 0x1c) - -static inline int gpio_to_irq(int pin) -{ - if (pin < NR_GPIO_IRQS) - return pin + IRQ_DOVE_GPIO_START; - - return -EINVAL; -} - -static inline int irq_to_gpio(int irq) -{ - if (IRQ_DOVE_GPIO_START < irq && irq < NR_IRQS) - return irq - IRQ_DOVE_GPIO_START; - - return -EINVAL; -} - -#endif diff --git a/arch/arm/mach-dove/include/mach/irqs.h b/arch/arm/mach-dove/include/mach/irqs.h index 46681466f92..03d401d2045 100644 --- a/arch/arm/mach-dove/include/mach/irqs.h +++ b/arch/arm/mach-dove/include/mach/irqs.h @@ -92,10 +92,5 @@ #define NR_IRQS (IRQ_DOVE_PMU_START + NR_PMU_IRQS) -/* Required for compatability with PXA AC97 driver. */ -#define IRQ_AC97 IRQ_DOVE_AC97 -/* Required for compatability with PXA DMA driver. */ -#define IRQ_DMA IRQ_DOVE_PDMA -/* Required for compatability with PXA NAND driver */ -#define IRQ_NAND IRQ_DOVE_NAND + #endif diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index 9317f0558b5..101707fa2e2 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -99,11 +99,21 @@ void __init dove_init_irq(void) orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)); /* - * Mask and clear GPIO IRQ interrupts. + * Initialize gpiolib for GPIOs 0-71. */ - writel(0, GPIO_LEVEL_MASK(0)); - writel(0, GPIO_EDGE_MASK(0)); - writel(0, GPIO_EDGE_CAUSE(0)); + orion_gpio_init(0, 32, DOVE_GPIO_LO_VIRT_BASE, 0, + IRQ_DOVE_GPIO_START); + set_irq_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler); + set_irq_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler); + set_irq_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler); + set_irq_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler); + + orion_gpio_init(32, 32, DOVE_GPIO_HI_VIRT_BASE, 0, + IRQ_DOVE_GPIO_START + 32); + set_irq_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler); + + orion_gpio_init(64, 8, DOVE_GPIO2_VIRT_BASE, 0, + IRQ_DOVE_GPIO_START + 64); /* * Mask and clear PMU interrupts @@ -111,18 +121,6 @@ void __init dove_init_irq(void) writel(0, PMU_INTERRUPT_MASK); writel(0, PMU_INTERRUPT_CAUSE); - for (i = IRQ_DOVE_GPIO_START; i < IRQ_DOVE_PMU_START; i++) { - set_irq_chip(i, &orion_gpio_irq_chip); - set_irq_handler(i, handle_level_irq); - irq_desc[i].status |= IRQ_LEVEL; - set_irq_flags(i, IRQF_VALID); - } - set_irq_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler); - set_irq_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler); - set_irq_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler); - set_irq_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler); - set_irq_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler); - for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) { set_irq_chip(i, &pmu_irq_chip); set_irq_handler(i, handle_level_irq); diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig new file mode 100644 index 00000000000..a021b5240bb --- /dev/null +++ b/arch/arm/mach-exynos4/Kconfig @@ -0,0 +1,195 @@ +# arch/arm/mach-exynos4/Kconfig +# +# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +# Configuration options for the EXYNOS4 + +if ARCH_EXYNOS4 + +config CPU_EXYNOS4210 + bool + select S3C_PL330_DMA + help + Enable EXYNOS4210 CPU support + +config EXYNOS4_MCT + bool "Kernel timer support by MCT" + help + Use MCT (Multi Core Timer) as kernel timers + +config EXYNOS4_DEV_PD + bool + help + Compile in platform device definitions for Power Domain + +config EXYNOS4_DEV_SYSMMU + bool + help + Common setup code for SYSTEM MMU in EXYNOS4 + +config EXYNOS4_SETUP_I2C1 + bool + help + Common setup code for i2c bus 1. + +config EXYNOS4_SETUP_I2C2 + bool + help + Common setup code for i2c bus 2. + +config EXYNOS4_SETUP_I2C3 + bool + help + Common setup code for i2c bus 3. + +config EXYNOS4_SETUP_I2C4 + bool + help + Common setup code for i2c bus 4. + +config EXYNOS4_SETUP_I2C5 + bool + help + Common setup code for i2c bus 5. + +config EXYNOS4_SETUP_I2C6 + bool + help + Common setup code for i2c bus 6. + +config EXYNOS4_SETUP_I2C7 + bool + help + Common setup code for i2c bus 7. + +config EXYNOS4_SETUP_KEYPAD + bool + help + Common setup code for keypad. + +config EXYNOS4_SETUP_SDHCI + bool + select EXYNOS4_SETUP_SDHCI_GPIO + help + Internal helper functions for EXYNOS4 based SDHCI systems. + +config EXYNOS4_SETUP_SDHCI_GPIO + bool + help + Common setup code for SDHCI gpio. + +config EXYNOS4_SETUP_FIMC + bool + help + Common setup code for the camera interfaces. + +# machine support + +menu "EXYNOS4 Machines" + +config MACH_SMDKC210 + bool "SMDKC210" + select CPU_EXYNOS4210 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S3C_DEV_I2C1 + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select EXYNOS4_DEV_PD + select EXYNOS4_DEV_SYSMMU + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_SDHCI + help + Machine support for Samsung SMDKC210 + +config MACH_SMDKV310 + bool "SMDKV310" + select CPU_EXYNOS4210 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S3C_DEV_I2C1 + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select SAMSUNG_DEV_KEYPAD + select EXYNOS4_DEV_PD + select EXYNOS4_DEV_SYSMMU + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_KEYPAD + select EXYNOS4_SETUP_SDHCI + help + Machine support for Samsung SMDKV310 + +config MACH_ARMLEX4210 + bool "ARMLEX4210" + select CPU_EXYNOS4210 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select EXYNOS4_DEV_SYSMMU + select EXYNOS4_SETUP_SDHCI + select SATA_AHCI_PLATFORM + help + Machine support for Samsung ARMLEX4210 based on EXYNOS4210 + +config MACH_UNIVERSAL_C210 + bool "Mobile UNIVERSAL_C210 Board" + select CPU_EXYNOS4210 + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select S3C_DEV_I2C1 + select S3C_DEV_I2C5 + select S5P_DEV_ONENAND + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_I2C5 + select EXYNOS4_SETUP_SDHCI + help + Machine support for Samsung Mobile Universal S5PC210 Reference + Board. + +config MACH_NURI + bool "Mobile NURI Board" + select CPU_EXYNOS4210 + select S3C_DEV_WDT + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select S3C_DEV_I2C1 + select S3C_DEV_I2C5 + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_I2C5 + select EXYNOS4_SETUP_SDHCI + select SAMSUNG_DEV_PWM + help + Machine support for Samsung Mobile NURI Board. + +endmenu + +comment "Configuration for HSMMC bus width" + +menu "Use 8-bit bus width" + +config EXYNOS4_SDHCI_CH0_8BIT + bool "Channel 0 with 8-bit bus" + help + Support HSMMC Channel 0 8-bit bus. + If selected, Channel 1 is disabled. + +config EXYNOS4_SDHCI_CH2_8BIT + bool "Channel 2 with 8-bit bus" + help + Support HSMMC Channel 2 8-bit bus. + If selected, Channel 3 is disabled. + +endmenu + +endif diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile new file mode 100644 index 00000000000..b8f0e7d82d7 --- /dev/null +++ b/arch/arm/mach-exynos4/Makefile @@ -0,0 +1,56 @@ +# arch/arm/mach-exynos4/Makefile +# +# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +# Core support for EXYNOS4 system + +obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o +obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o gpiolib.o irq-eint.o dma.o +obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_CPU_FREQ) += cpufreq.o + +obj-$(CONFIG_SMP) += platsmp.o headsmp.o + +ifeq ($(CONFIG_EXYNOS4_MCT),y) +obj-y += mct.o +else +obj-y += time.o +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o +endif + +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o + +# machine support + +obj-$(CONFIG_MACH_SMDKC210) += mach-smdkc210.o +obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o +obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o +obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o +obj-$(CONFIG_MACH_NURI) += mach-nuri.o + +# device support + +obj-y += dev-audio.o +obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o +obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o + +obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o +obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_EXYNOS4_SETUP_I2C2) += setup-i2c2.o +obj-$(CONFIG_EXYNOS4_SETUP_I2C3) += setup-i2c3.o +obj-$(CONFIG_EXYNOS4_SETUP_I2C4) += setup-i2c4.o +obj-$(CONFIG_EXYNOS4_SETUP_I2C5) += setup-i2c5.o +obj-$(CONFIG_EXYNOS4_SETUP_I2C6) += setup-i2c6.o +obj-$(CONFIG_EXYNOS4_SETUP_I2C7) += setup-i2c7.o +obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o +obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o +obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o +obj-$(CONFIG_SATA_AHCI_PLATFORM) += dev-ahci.o diff --git a/arch/arm/mach-s5pv310/Makefile.boot b/arch/arm/mach-exynos4/Makefile.boot index d65956ffb43..d65956ffb43 100644 --- a/arch/arm/mach-s5pv310/Makefile.boot +++ b/arch/arm/mach-exynos4/Makefile.boot diff --git a/arch/arm/mach-s5pv310/clock.c b/arch/arm/mach-exynos4/clock.c index fc7c2f8d165..871f9d508fd 100644 --- a/arch/arm/mach-s5pv310/clock.c +++ b/arch/arm/mach-exynos4/clock.c @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/clock.c +/* linux/arch/arm/mach-exynos4/clock.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5PV310 - Clock support + * EXYNOS4 - Clock support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -23,6 +23,7 @@ #include <mach/map.h> #include <mach/regs-clock.h> +#include <mach/sysmmu.h> static struct clk clk_sclk_hdmi27m = { .name = "sclk_hdmi27m", @@ -46,72 +47,82 @@ static struct clk clk_sclk_usbphy1 = { .id = -1, }; -static int s5pv310_clksrc_mask_top_ctrl(struct clk *clk, int enable) +static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable); } -static int s5pv310_clksrc_mask_cam_ctrl(struct clk *clk, int enable) +static int exynos4_clksrc_mask_cam_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_CAM, clk, enable); } -static int s5pv310_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable) +static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable); } -static int s5pv310_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable) +static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable); } -static int s5pv310_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) +static int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable); } -static int s5pv310_clksrc_mask_peril0_ctrl(struct clk *clk, int enable) +static int exynos4_clksrc_mask_peril0_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL0, clk, enable); } -static int s5pv310_clksrc_mask_peril1_ctrl(struct clk *clk, int enable) +static int exynos4_clksrc_mask_peril1_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL1, clk, enable); } -static int s5pv310_clk_ip_cam_ctrl(struct clk *clk, int enable) +static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_MFC, clk, enable); +} + +static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable); } -static int s5pv310_clk_ip_image_ctrl(struct clk *clk, int enable) +static int exynos4_clk_ip_tv_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_TV, clk, enable); +} + +static int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_IMAGE, clk, enable); } -static int s5pv310_clk_ip_lcd0_ctrl(struct clk *clk, int enable) +static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable); } -static int s5pv310_clk_ip_lcd1_ctrl(struct clk *clk, int enable) +static int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable); } -static int s5pv310_clk_ip_fsys_ctrl(struct clk *clk, int enable) +static int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable); } -static int s5pv310_clk_ip_peril_ctrl(struct clk *clk, int enable) +static int exynos4_clk_ip_peril_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_PERIL, clk, enable); } -static int s5pv310_clk_ip_perir_ctrl(struct clk *clk, int enable) +static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable); } @@ -358,7 +369,7 @@ static struct clksrc_clk clk_vpllsrc = { .clk = { .name = "vpll_src", .id = -1, - .enable = s5pv310_clksrc_mask_top_ctrl, + .enable = exynos4_clksrc_mask_top_ctrl, .ctrlbit = (1 << 0), }, .sources = &clkset_vpllsrc, @@ -389,239 +400,322 @@ static struct clk init_clocks_off[] = { .name = "timers", .id = -1, .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1<<24), }, { .name = "csis", .id = 0, - .enable = s5pv310_clk_ip_cam_ctrl, + .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 4), }, { .name = "csis", .id = 1, - .enable = s5pv310_clk_ip_cam_ctrl, + .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 5), }, { .name = "fimc", .id = 0, - .enable = s5pv310_clk_ip_cam_ctrl, + .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 0), }, { .name = "fimc", .id = 1, - .enable = s5pv310_clk_ip_cam_ctrl, + .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 1), }, { .name = "fimc", .id = 2, - .enable = s5pv310_clk_ip_cam_ctrl, + .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 2), }, { .name = "fimc", .id = 3, - .enable = s5pv310_clk_ip_cam_ctrl, + .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 3), }, { .name = "fimd", .id = 0, - .enable = s5pv310_clk_ip_lcd0_ctrl, + .enable = exynos4_clk_ip_lcd0_ctrl, .ctrlbit = (1 << 0), }, { .name = "fimd", .id = 1, - .enable = s5pv310_clk_ip_lcd1_ctrl, + .enable = exynos4_clk_ip_lcd1_ctrl, .ctrlbit = (1 << 0), }, { + .name = "sataphy", + .id = -1, + .parent = &clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 3), + }, { .name = "hsmmc", .id = 0, .parent = &clk_aclk_133.clk, - .enable = s5pv310_clk_ip_fsys_ctrl, + .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 5), }, { .name = "hsmmc", .id = 1, .parent = &clk_aclk_133.clk, - .enable = s5pv310_clk_ip_fsys_ctrl, + .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 6), }, { .name = "hsmmc", .id = 2, .parent = &clk_aclk_133.clk, - .enable = s5pv310_clk_ip_fsys_ctrl, + .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 7), }, { .name = "hsmmc", .id = 3, .parent = &clk_aclk_133.clk, - .enable = s5pv310_clk_ip_fsys_ctrl, + .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 8), }, { .name = "hsmmc", .id = 4, .parent = &clk_aclk_133.clk, - .enable = s5pv310_clk_ip_fsys_ctrl, + .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 9), }, { .name = "sata", .id = -1, - .enable = s5pv310_clk_ip_fsys_ctrl, + .parent = &clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 10), }, { .name = "pdma", .id = 0, - .enable = s5pv310_clk_ip_fsys_ctrl, + .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 0), }, { .name = "pdma", .id = 1, - .enable = s5pv310_clk_ip_fsys_ctrl, + .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 1), }, { .name = "adc", .id = -1, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 15), }, { + .name = "keypad", + .id = -1, + .enable = exynos4_clk_ip_perir_ctrl, + .ctrlbit = (1 << 16), + }, { .name = "rtc", .id = -1, - .enable = s5pv310_clk_ip_perir_ctrl, + .enable = exynos4_clk_ip_perir_ctrl, .ctrlbit = (1 << 15), }, { .name = "watchdog", .id = -1, - .enable = s5pv310_clk_ip_perir_ctrl, + .parent = &clk_aclk_100.clk, + .enable = exynos4_clk_ip_perir_ctrl, .ctrlbit = (1 << 14), }, { .name = "usbhost", .id = -1, - .enable = s5pv310_clk_ip_fsys_ctrl , + .enable = exynos4_clk_ip_fsys_ctrl , .ctrlbit = (1 << 12), }, { .name = "otg", .id = -1, - .enable = s5pv310_clk_ip_fsys_ctrl, + .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 13), }, { .name = "spi", .id = 0, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 16), }, { .name = "spi", .id = 1, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 17), }, { .name = "spi", .id = 2, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 18), }, { .name = "iis", .id = 0, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 19), }, { .name = "iis", .id = 1, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 20), }, { .name = "iis", .id = 2, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 21), }, { .name = "ac97", .id = -1, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 27), }, { .name = "fimg2d", .id = -1, - .enable = s5pv310_clk_ip_image_ctrl, + .enable = exynos4_clk_ip_image_ctrl, .ctrlbit = (1 << 0), }, { .name = "i2c", .id = 0, .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 6), }, { .name = "i2c", .id = 1, .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 7), }, { .name = "i2c", .id = 2, .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 8), }, { .name = "i2c", .id = 3, .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 9), }, { .name = "i2c", .id = 4, .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 10), }, { .name = "i2c", .id = 5, .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 11), }, { .name = "i2c", .id = 6, .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 12), }, { .name = "i2c", .id = 7, .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 13), - }, + }, { + .name = "SYSMMU_MDMA", + .id = -1, + .enable = exynos4_clk_ip_image_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "SYSMMU_FIMC0", + .id = -1, + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "SYSMMU_FIMC1", + .id = -1, + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "SYSMMU_FIMC2", + .id = -1, + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 9), + }, { + .name = "SYSMMU_FIMC3", + .id = -1, + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = "SYSMMU_JPEG", + .id = -1, + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 11), + }, { + .name = "SYSMMU_FIMD0", + .id = -1, + .enable = exynos4_clk_ip_lcd0_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "SYSMMU_FIMD1", + .id = -1, + .enable = exynos4_clk_ip_lcd1_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "SYSMMU_PCIe", + .id = -1, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 18), + }, { + .name = "SYSMMU_G2D", + .id = -1, + .enable = exynos4_clk_ip_image_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "SYSMMU_ROTATOR", + .id = -1, + .enable = exynos4_clk_ip_image_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "SYSMMU_TV", + .id = -1, + .enable = exynos4_clk_ip_tv_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "SYSMMU_MFC_L", + .id = -1, + .enable = exynos4_clk_ip_mfc_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "SYSMMU_MFC_R", + .id = -1, + .enable = exynos4_clk_ip_mfc_ctrl, + .ctrlbit = (1 << 2), + } }; static struct clk init_clocks[] = { { .name = "uart", .id = 0, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 0), }, { .name = "uart", .id = 1, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 1), }, { .name = "uart", .id = 2, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 2), }, { .name = "uart", .id = 3, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 3), }, { .name = "uart", .id = 4, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 4), }, { .name = "uart", .id = 5, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 5), } }; @@ -746,7 +840,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "uclk1", .id = 0, - .enable = s5pv310_clksrc_mask_peril0_ctrl, + .enable = exynos4_clksrc_mask_peril0_ctrl, .ctrlbit = (1 << 0), }, .sources = &clkset_group, @@ -756,7 +850,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "uclk1", .id = 1, - .enable = s5pv310_clksrc_mask_peril0_ctrl, + .enable = exynos4_clksrc_mask_peril0_ctrl, .ctrlbit = (1 << 4), }, .sources = &clkset_group, @@ -766,7 +860,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "uclk1", .id = 2, - .enable = s5pv310_clksrc_mask_peril0_ctrl, + .enable = exynos4_clksrc_mask_peril0_ctrl, .ctrlbit = (1 << 8), }, .sources = &clkset_group, @@ -776,7 +870,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "uclk1", .id = 3, - .enable = s5pv310_clksrc_mask_peril0_ctrl, + .enable = exynos4_clksrc_mask_peril0_ctrl, .ctrlbit = (1 << 12), }, .sources = &clkset_group, @@ -786,7 +880,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_pwm", .id = -1, - .enable = s5pv310_clksrc_mask_peril0_ctrl, + .enable = exynos4_clksrc_mask_peril0_ctrl, .ctrlbit = (1 << 24), }, .sources = &clkset_group, @@ -796,7 +890,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_csis", .id = 0, - .enable = s5pv310_clksrc_mask_cam_ctrl, + .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 24), }, .sources = &clkset_group, @@ -806,7 +900,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_csis", .id = 1, - .enable = s5pv310_clksrc_mask_cam_ctrl, + .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 28), }, .sources = &clkset_group, @@ -816,7 +910,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_cam", .id = 0, - .enable = s5pv310_clksrc_mask_cam_ctrl, + .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 16), }, .sources = &clkset_group, @@ -826,7 +920,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_cam", .id = 1, - .enable = s5pv310_clksrc_mask_cam_ctrl, + .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 20), }, .sources = &clkset_group, @@ -836,7 +930,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_fimc", .id = 0, - .enable = s5pv310_clksrc_mask_cam_ctrl, + .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 0), }, .sources = &clkset_group, @@ -846,7 +940,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_fimc", .id = 1, - .enable = s5pv310_clksrc_mask_cam_ctrl, + .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 4), }, .sources = &clkset_group, @@ -856,7 +950,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_fimc", .id = 2, - .enable = s5pv310_clksrc_mask_cam_ctrl, + .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 8), }, .sources = &clkset_group, @@ -866,7 +960,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_fimc", .id = 3, - .enable = s5pv310_clksrc_mask_cam_ctrl, + .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 12), }, .sources = &clkset_group, @@ -876,7 +970,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_fimd", .id = 0, - .enable = s5pv310_clksrc_mask_lcd0_ctrl, + .enable = exynos4_clksrc_mask_lcd0_ctrl, .ctrlbit = (1 << 0), }, .sources = &clkset_group, @@ -886,7 +980,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_fimd", .id = 1, - .enable = s5pv310_clksrc_mask_lcd1_ctrl, + .enable = exynos4_clksrc_mask_lcd1_ctrl, .ctrlbit = (1 << 0), }, .sources = &clkset_group, @@ -896,7 +990,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_sata", .id = -1, - .enable = s5pv310_clksrc_mask_fsys_ctrl, + .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 24), }, .sources = &clkset_mout_corebus, @@ -906,7 +1000,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_spi", .id = 0, - .enable = s5pv310_clksrc_mask_peril1_ctrl, + .enable = exynos4_clksrc_mask_peril1_ctrl, .ctrlbit = (1 << 16), }, .sources = &clkset_group, @@ -916,7 +1010,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_spi", .id = 1, - .enable = s5pv310_clksrc_mask_peril1_ctrl, + .enable = exynos4_clksrc_mask_peril1_ctrl, .ctrlbit = (1 << 20), }, .sources = &clkset_group, @@ -926,7 +1020,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_spi", .id = 2, - .enable = s5pv310_clksrc_mask_peril1_ctrl, + .enable = exynos4_clksrc_mask_peril1_ctrl, .ctrlbit = (1 << 24), }, .sources = &clkset_group, @@ -945,7 +1039,7 @@ static struct clksrc_clk clksrcs[] = { .name = "sclk_mmc", .id = 0, .parent = &clk_dout_mmc0.clk, - .enable = s5pv310_clksrc_mask_fsys_ctrl, + .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 0), }, .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 }, @@ -954,7 +1048,7 @@ static struct clksrc_clk clksrcs[] = { .name = "sclk_mmc", .id = 1, .parent = &clk_dout_mmc1.clk, - .enable = s5pv310_clksrc_mask_fsys_ctrl, + .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 4), }, .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 }, @@ -963,7 +1057,7 @@ static struct clksrc_clk clksrcs[] = { .name = "sclk_mmc", .id = 2, .parent = &clk_dout_mmc2.clk, - .enable = s5pv310_clksrc_mask_fsys_ctrl, + .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 8), }, .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 }, @@ -972,7 +1066,7 @@ static struct clksrc_clk clksrcs[] = { .name = "sclk_mmc", .id = 3, .parent = &clk_dout_mmc3.clk, - .enable = s5pv310_clksrc_mask_fsys_ctrl, + .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 12), }, .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 }, @@ -981,7 +1075,7 @@ static struct clksrc_clk clksrcs[] = { .name = "sclk_mmc", .id = 4, .parent = &clk_dout_mmc4.clk, - .enable = s5pv310_clksrc_mask_fsys_ctrl, + .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 16), }, .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 8, .size = 8 }, @@ -1022,16 +1116,16 @@ static struct clksrc_clk *sysclks[] = { static int xtal_rate; -static unsigned long s5pv310_fout_apll_get_rate(struct clk *clk) +static unsigned long exynos4_fout_apll_get_rate(struct clk *clk) { return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), pll_4508); } -static struct clk_ops s5pv310_fout_apll_ops = { - .get_rate = s5pv310_fout_apll_get_rate, +static struct clk_ops exynos4_fout_apll_ops = { + .get_rate = exynos4_fout_apll_get_rate, }; -void __init_or_cpufreq s5pv310_setup_clocks(void) +void __init_or_cpufreq exynos4_setup_clocks(void) { struct clk *xtal_clk; unsigned long apll; @@ -1070,12 +1164,12 @@ void __init_or_cpufreq s5pv310_setup_clocks(void) vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), __raw_readl(S5P_VPLL_CON1), pll_4650); - clk_fout_apll.ops = &s5pv310_fout_apll_ops; + clk_fout_apll.ops = &exynos4_fout_apll_ops; clk_fout_mpll.rate = mpll; clk_fout_epll.rate = epll; clk_fout_vpll.rate = vpll; - printk(KERN_INFO "S5PV310: PLL settings, A=%ld, M=%ld, E=%ld V=%ld", + printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld", apll, mpll, epll, vpll); armclk = clk_get_rate(&clk_armclk.clk); @@ -1086,7 +1180,7 @@ void __init_or_cpufreq s5pv310_setup_clocks(void) aclk_160 = clk_get_rate(&clk_aclk_160.clk); aclk_133 = clk_get_rate(&clk_aclk_133.clk); - printk(KERN_INFO "S5PV310: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n" + printk(KERN_INFO "EXYNOS4: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n" "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n", armclk, sclk_dmc, aclk_200, aclk_100, aclk_160, aclk_133); @@ -1103,7 +1197,7 @@ static struct clk *clks[] __initdata = { /* Nothing here yet */ }; -void __init s5pv310_register_clocks(void) +void __init exynos4_register_clocks(void) { int ptr; diff --git a/arch/arm/mach-s5pv310/cpu.c b/arch/arm/mach-exynos4/cpu.c index 0db0fb65bd7..79301139194 100644 --- a/arch/arm/mach-s5pv310/cpu.c +++ b/arch/arm/mach-exynos4/cpu.c @@ -1,7 +1,7 @@ -/* linux/arch/arm/mach-s5pv310/cpu.c +/* linux/arch/arm/mach-exynos4/cpu.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -19,8 +19,10 @@ #include <plat/cpu.h> #include <plat/clock.h> -#include <plat/s5pv310.h> +#include <plat/exynos4.h> #include <plat/sdhci.h> +#include <plat/devs.h> +#include <plat/fimc-core.h> #include <mach/regs-irq.h> @@ -29,55 +31,60 @@ extern int combiner_init(unsigned int combiner_nr, void __iomem *base, extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq); /* Initial IO mappings */ -static struct map_desc s5pv310_iodesc[] __initdata = { +static struct map_desc exynos4_iodesc[] __initdata = { { + .virtual = (unsigned long)S5P_VA_SYSTIMER, + .pfn = __phys_to_pfn(EXYNOS4_PA_SYSTIMER), + .length = SZ_4K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(S5PV310_PA_SYSRAM), + .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM), .length = SZ_4K, .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_CMU, - .pfn = __phys_to_pfn(S5PV310_PA_CMU), + .pfn = __phys_to_pfn(EXYNOS4_PA_CMU), .length = SZ_128K, .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_PMU, - .pfn = __phys_to_pfn(S5PV310_PA_PMU), + .pfn = __phys_to_pfn(EXYNOS4_PA_PMU), .length = SZ_64K, .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_COMBINER_BASE, - .pfn = __phys_to_pfn(S5PV310_PA_COMBINER), + .pfn = __phys_to_pfn(EXYNOS4_PA_COMBINER), .length = SZ_4K, .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_COREPERI_BASE, - .pfn = __phys_to_pfn(S5PV310_PA_COREPERI), + .pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI), .length = SZ_8K, .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_L2CC, - .pfn = __phys_to_pfn(S5PV310_PA_L2CC), + .pfn = __phys_to_pfn(EXYNOS4_PA_L2CC), .length = SZ_4K, .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_GPIO1, - .pfn = __phys_to_pfn(S5PV310_PA_GPIO1), + .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO1), .length = SZ_4K, .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_GPIO2, - .pfn = __phys_to_pfn(S5PV310_PA_GPIO2), + .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO2), .length = SZ_4K, .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_GPIO3, - .pfn = __phys_to_pfn(S5PV310_PA_GPIO3), + .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO3), .length = SZ_256, .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_DMC0, - .pfn = __phys_to_pfn(S5PV310_PA_DMC0), + .pfn = __phys_to_pfn(EXYNOS4_PA_DMC0), .length = SZ_4K, .type = MT_DEVICE, }, { @@ -87,13 +94,13 @@ static struct map_desc s5pv310_iodesc[] __initdata = { .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_SROMC, - .pfn = __phys_to_pfn(S5PV310_PA_SROMC), + .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC), .length = SZ_4K, .type = MT_DEVICE, }, }; -static void s5pv310_idle(void) +static void exynos4_idle(void) { if (!need_resched()) cpu_do_idle(); @@ -101,32 +108,38 @@ static void s5pv310_idle(void) local_irq_enable(); } -/* s5pv310_map_io +/* + * exynos4_map_io * * register the standard cpu IO areas -*/ -void __init s5pv310_map_io(void) + */ +void __init exynos4_map_io(void) { - iotable_init(s5pv310_iodesc, ARRAY_SIZE(s5pv310_iodesc)); + iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc)); /* initialize device information early */ - s5pv310_default_sdhci0(); - s5pv310_default_sdhci1(); - s5pv310_default_sdhci2(); - s5pv310_default_sdhci3(); + exynos4_default_sdhci0(); + exynos4_default_sdhci1(); + exynos4_default_sdhci2(); + exynos4_default_sdhci3(); + + s3c_fimc_setname(0, "exynos4-fimc"); + s3c_fimc_setname(1, "exynos4-fimc"); + s3c_fimc_setname(2, "exynos4-fimc"); + s3c_fimc_setname(3, "exynos4-fimc"); } -void __init s5pv310_init_clocks(int xtal) +void __init exynos4_init_clocks(int xtal) { printk(KERN_DEBUG "%s: initializing clocks\n", __func__); s3c24xx_register_baseclocks(xtal); s5p_register_clocks(xtal); - s5pv310_register_clocks(); - s5pv310_setup_clocks(); + exynos4_register_clocks(); + exynos4_setup_clocks(); } -void __init s5pv310_init_irq(void) +void __init exynos4_init_irq(void) { int irq; @@ -148,29 +161,29 @@ void __init s5pv310_init_irq(void) } /* The parameters of s5p_init_irq() are for VIC init. - * Theses parameters should be NULL and 0 because S5PV310 + * Theses parameters should be NULL and 0 because EXYNOS4 * uses GIC instead of VIC. */ s5p_init_irq(NULL, 0); } -struct sysdev_class s5pv310_sysclass = { - .name = "s5pv310-core", +struct sysdev_class exynos4_sysclass = { + .name = "exynos4-core", }; -static struct sys_device s5pv310_sysdev = { - .cls = &s5pv310_sysclass, +static struct sys_device exynos4_sysdev = { + .cls = &exynos4_sysclass, }; -static int __init s5pv310_core_init(void) +static int __init exynos4_core_init(void) { - return sysdev_class_register(&s5pv310_sysclass); + return sysdev_class_register(&exynos4_sysclass); } -core_initcall(s5pv310_core_init); +core_initcall(exynos4_core_init); #ifdef CONFIG_CACHE_L2X0 -static int __init s5pv310_l2x0_cache_init(void) +static int __init exynos4_l2x0_cache_init(void) { /* TAG, Data Latency Control: 2cycle */ __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL); @@ -188,15 +201,15 @@ static int __init s5pv310_l2x0_cache_init(void) return 0; } -early_initcall(s5pv310_l2x0_cache_init); +early_initcall(exynos4_l2x0_cache_init); #endif -int __init s5pv310_init(void) +int __init exynos4_init(void) { - printk(KERN_INFO "S5PV310: Initializing architecture\n"); + printk(KERN_INFO "EXYNOS4: Initializing architecture\n"); /* set idle function */ - pm_idle = s5pv310_idle; + pm_idle = exynos4_idle; - return sysdev_register(&s5pv310_sysdev); + return sysdev_register(&exynos4_sysdev); } diff --git a/arch/arm/mach-s5pv310/cpufreq.c b/arch/arm/mach-exynos4/cpufreq.c index 7c08ad7d888..a1bd258f0c4 100644 --- a/arch/arm/mach-s5pv310/cpufreq.c +++ b/arch/arm/mach-exynos4/cpufreq.c @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/cpufreq.c +/* linux/arch/arm/mach-exynos4/cpufreq.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * S5PV310 - CPU frequency scaling support + * EXYNOS4 - CPU frequency scaling support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -31,15 +31,13 @@ static struct clk *moutcore; static struct clk *mout_mpll; static struct clk *mout_apll; -#ifdef CONFIG_REGULATOR static struct regulator *arm_regulator; static struct regulator *int_regulator; -#endif static struct cpufreq_freqs freqs; static unsigned int memtype; -enum s5pv310_memory_type { +enum exynos4_memory_type { DDR2 = 4, LPDDR2, DDR3, @@ -49,7 +47,7 @@ enum cpufreq_level_index { L0, L1, L2, L3, CPUFREQ_LEVEL_END, }; -static struct cpufreq_frequency_table s5pv310_freq_table[] = { +static struct cpufreq_frequency_table exynos4_freq_table[] = { {L0, 1000*1000}, {L1, 800*1000}, {L2, 400*1000}, @@ -160,7 +158,7 @@ struct cpufreq_voltage_table { unsigned int int_volt; }; -static struct cpufreq_voltage_table s5pv310_volt_table[CPUFREQ_LEVEL_END] = { +static struct cpufreq_voltage_table exynos4_volt_table[CPUFREQ_LEVEL_END] = { { .index = L0, .arm_volt = 1200000, @@ -180,7 +178,7 @@ static struct cpufreq_voltage_table s5pv310_volt_table[CPUFREQ_LEVEL_END] = { }, }; -static unsigned int s5pv310_apll_pms_table[CPUFREQ_LEVEL_END] = { +static unsigned int exynos4_apll_pms_table[CPUFREQ_LEVEL_END] = { /* APLL FOUT L0: 1000MHz */ ((250 << 16) | (6 << 8) | 1), @@ -194,17 +192,17 @@ static unsigned int s5pv310_apll_pms_table[CPUFREQ_LEVEL_END] = { ((200 << 16) | (6 << 8) | 4), }; -int s5pv310_verify_speed(struct cpufreq_policy *policy) +int exynos4_verify_speed(struct cpufreq_policy *policy) { - return cpufreq_frequency_table_verify(policy, s5pv310_freq_table); + return cpufreq_frequency_table_verify(policy, exynos4_freq_table); } -unsigned int s5pv310_getspeed(unsigned int cpu) +unsigned int exynos4_getspeed(unsigned int cpu) { return clk_get_rate(cpu_clk) / 1000; } -void s5pv310_set_clkdiv(unsigned int div_index) +void exynos4_set_clkdiv(unsigned int div_index) { unsigned int tmp; @@ -321,7 +319,7 @@ void s5pv310_set_clkdiv(unsigned int div_index) } while (tmp & 0x11); } -static void s5pv310_set_apll(unsigned int index) +static void exynos4_set_apll(unsigned int index) { unsigned int tmp; @@ -340,7 +338,7 @@ static void s5pv310_set_apll(unsigned int index) /* 3. Change PLL PMS values */ tmp = __raw_readl(S5P_APLL_CON0); tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0)); - tmp |= s5pv310_apll_pms_table[index]; + tmp |= exynos4_apll_pms_table[index]; __raw_writel(tmp, S5P_APLL_CON0); /* 4. wait_lock_time */ @@ -357,99 +355,95 @@ static void s5pv310_set_apll(unsigned int index) } while (tmp != (0x1 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)); } -static void s5pv310_set_frequency(unsigned int old_index, unsigned int new_index) +static void exynos4_set_frequency(unsigned int old_index, unsigned int new_index) { unsigned int tmp; if (old_index > new_index) { /* The frequency changing to L0 needs to change apll */ - if (freqs.new == s5pv310_freq_table[L0].frequency) { + if (freqs.new == exynos4_freq_table[L0].frequency) { /* 1. Change the system clock divider values */ - s5pv310_set_clkdiv(new_index); + exynos4_set_clkdiv(new_index); /* 2. Change the apll m,p,s value */ - s5pv310_set_apll(new_index); + exynos4_set_apll(new_index); } else { /* 1. Change the system clock divider values */ - s5pv310_set_clkdiv(new_index); + exynos4_set_clkdiv(new_index); /* 2. Change just s value in apll m,p,s value */ tmp = __raw_readl(S5P_APLL_CON0); tmp &= ~(0x7 << 0); - tmp |= (s5pv310_apll_pms_table[new_index] & 0x7); + tmp |= (exynos4_apll_pms_table[new_index] & 0x7); __raw_writel(tmp, S5P_APLL_CON0); } } else if (old_index < new_index) { /* The frequency changing from L0 needs to change apll */ - if (freqs.old == s5pv310_freq_table[L0].frequency) { + if (freqs.old == exynos4_freq_table[L0].frequency) { /* 1. Change the apll m,p,s value */ - s5pv310_set_apll(new_index); + exynos4_set_apll(new_index); /* 2. Change the system clock divider values */ - s5pv310_set_clkdiv(new_index); + exynos4_set_clkdiv(new_index); } else { /* 1. Change just s value in apll m,p,s value */ tmp = __raw_readl(S5P_APLL_CON0); tmp &= ~(0x7 << 0); - tmp |= (s5pv310_apll_pms_table[new_index] & 0x7); + tmp |= (exynos4_apll_pms_table[new_index] & 0x7); __raw_writel(tmp, S5P_APLL_CON0); /* 2. Change the system clock divider values */ - s5pv310_set_clkdiv(new_index); + exynos4_set_clkdiv(new_index); } } } -static int s5pv310_target(struct cpufreq_policy *policy, +static int exynos4_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { unsigned int index, old_index; unsigned int arm_volt, int_volt; - freqs.old = s5pv310_getspeed(policy->cpu); + freqs.old = exynos4_getspeed(policy->cpu); - if (cpufreq_frequency_table_target(policy, s5pv310_freq_table, + if (cpufreq_frequency_table_target(policy, exynos4_freq_table, freqs.old, relation, &old_index)) return -EINVAL; - if (cpufreq_frequency_table_target(policy, s5pv310_freq_table, + if (cpufreq_frequency_table_target(policy, exynos4_freq_table, target_freq, relation, &index)) return -EINVAL; - freqs.new = s5pv310_freq_table[index].frequency; + freqs.new = exynos4_freq_table[index].frequency; freqs.cpu = policy->cpu; if (freqs.new == freqs.old) return 0; /* get the voltage value */ - arm_volt = s5pv310_volt_table[index].arm_volt; - int_volt = s5pv310_volt_table[index].int_volt; + arm_volt = exynos4_volt_table[index].arm_volt; + int_volt = exynos4_volt_table[index].int_volt; cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); /* control regulator */ if (freqs.new > freqs.old) { /* Voltage up */ -#ifdef CONFIG_REGULATOR regulator_set_voltage(arm_regulator, arm_volt, arm_volt); regulator_set_voltage(int_regulator, int_volt, int_volt); -#endif } /* Clock Configuration Procedure */ - s5pv310_set_frequency(old_index, index); + exynos4_set_frequency(old_index, index); /* control regulator */ if (freqs.new < freqs.old) { /* Voltage down */ -#ifdef CONFIG_REGULATOR regulator_set_voltage(arm_regulator, arm_volt, arm_volt); regulator_set_voltage(int_regulator, int_volt, int_volt); -#endif } cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); @@ -458,51 +452,51 @@ static int s5pv310_target(struct cpufreq_policy *policy, } #ifdef CONFIG_PM -static int s5pv310_cpufreq_suspend(struct cpufreq_policy *policy) +static int exynos4_cpufreq_suspend(struct cpufreq_policy *policy) { return 0; } -static int s5pv310_cpufreq_resume(struct cpufreq_policy *policy) +static int exynos4_cpufreq_resume(struct cpufreq_policy *policy) { return 0; } #endif -static int s5pv310_cpufreq_cpu_init(struct cpufreq_policy *policy) +static int exynos4_cpufreq_cpu_init(struct cpufreq_policy *policy) { - policy->cur = policy->min = policy->max = s5pv310_getspeed(policy->cpu); + policy->cur = policy->min = policy->max = exynos4_getspeed(policy->cpu); - cpufreq_frequency_table_get_attr(s5pv310_freq_table, policy->cpu); + cpufreq_frequency_table_get_attr(exynos4_freq_table, policy->cpu); /* set the transition latency value */ policy->cpuinfo.transition_latency = 100000; /* - * S5PV310 multi-core processors has 2 cores + * EXYNOS4 multi-core processors has 2 cores * that the frequency cannot be set independently. * Each cpu is bound to the same speed. * So the affected cpu is all of the cpus. */ cpumask_setall(policy->cpus); - return cpufreq_frequency_table_cpuinfo(policy, s5pv310_freq_table); + return cpufreq_frequency_table_cpuinfo(policy, exynos4_freq_table); } -static struct cpufreq_driver s5pv310_driver = { +static struct cpufreq_driver exynos4_driver = { .flags = CPUFREQ_STICKY, - .verify = s5pv310_verify_speed, - .target = s5pv310_target, - .get = s5pv310_getspeed, - .init = s5pv310_cpufreq_cpu_init, - .name = "s5pv310_cpufreq", + .verify = exynos4_verify_speed, + .target = exynos4_target, + .get = exynos4_getspeed, + .init = exynos4_cpufreq_cpu_init, + .name = "exynos4_cpufreq", #ifdef CONFIG_PM - .suspend = s5pv310_cpufreq_suspend, - .resume = s5pv310_cpufreq_resume, + .suspend = exynos4_cpufreq_suspend, + .resume = exynos4_cpufreq_resume, #endif }; -static int __init s5pv310_cpufreq_init(void) +static int __init exynos4_cpufreq_init(void) { cpu_clk = clk_get(NULL, "armclk"); if (IS_ERR(cpu_clk)) @@ -520,7 +514,6 @@ static int __init s5pv310_cpufreq_init(void) if (IS_ERR(mout_apll)) goto out; -#ifdef CONFIG_REGULATOR arm_regulator = regulator_get(NULL, "vdd_arm"); if (IS_ERR(arm_regulator)) { printk(KERN_ERR "failed to get resource %s\n", "vdd_arm"); @@ -532,7 +525,6 @@ static int __init s5pv310_cpufreq_init(void) printk(KERN_ERR "failed to get resource %s\n", "vdd_int"); goto out; } -#endif /* * Check DRAM type. @@ -549,7 +541,7 @@ static int __init s5pv310_cpufreq_init(void) printk(KERN_DEBUG "%s: memtype= 0x%x\n", __func__, memtype); } - return cpufreq_register_driver(&s5pv310_driver); + return cpufreq_register_driver(&exynos4_driver); out: if (!IS_ERR(cpu_clk)) @@ -564,16 +556,14 @@ out: if (!IS_ERR(mout_apll)) clk_put(mout_apll); -#ifdef CONFIG_REGULATOR if (!IS_ERR(arm_regulator)) regulator_put(arm_regulator); if (!IS_ERR(int_regulator)) regulator_put(int_regulator); -#endif printk(KERN_ERR "%s: failed initialization\n", __func__); return -EINVAL; } -late_initcall(s5pv310_cpufreq_init); +late_initcall(exynos4_cpufreq_init); diff --git a/arch/arm/mach-exynos4/dev-ahci.c b/arch/arm/mach-exynos4/dev-ahci.c new file mode 100644 index 00000000000..f57a3de8e1d --- /dev/null +++ b/arch/arm/mach-exynos4/dev-ahci.c @@ -0,0 +1,263 @@ +/* linux/arch/arm/mach-exynos4/dev-ahci.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - AHCI support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/ahci_platform.h> + +#include <plat/cpu.h> + +#include <mach/irqs.h> +#include <mach/map.h> +#include <mach/regs-pmu.h> + +/* PHY Control Register */ +#define SATA_CTRL0 0x0 +/* PHY Link Control Register */ +#define SATA_CTRL1 0x4 +/* PHY Status Register */ +#define SATA_PHY_STATUS 0x8 + +#define SATA_CTRL0_RX_DATA_VALID(x) (x << 27) +#define SATA_CTRL0_SPEED_MODE (1 << 26) +#define SATA_CTRL0_M_PHY_CAL (1 << 19) +#define SATA_CTRL0_PHY_CMU_RST_N (1 << 10) +#define SATA_CTRL0_M_PHY_LN_RST_N (1 << 9) +#define SATA_CTRL0_PHY_POR_N (1 << 8) + +#define SATA_CTRL1_RST_PMALIVE_N (1 << 8) +#define SATA_CTRL1_RST_RXOOB_N (1 << 7) +#define SATA_CTRL1_RST_RX_N (1 << 6) +#define SATA_CTRL1_RST_TX_N (1 << 5) + +#define SATA_PHY_STATUS_CMU_OK (1 << 18) +#define SATA_PHY_STATUS_LANE_OK (1 << 16) + +#define LANE0 0x200 +#define COM_LANE 0xA00 + +#define HOST_PORTS_IMPL 0xC +#define SCLK_SATA_FREQ (67 * MHZ) + +static void __iomem *phy_base, *phy_ctrl; + +struct phy_reg { + u8 reg; + u8 val; +}; + +/* SATA PHY setup */ +static const struct phy_reg exynos4_sataphy_cmu[] = { + { 0x00, 0x06 }, { 0x02, 0x80 }, { 0x22, 0xa0 }, { 0x23, 0x42 }, + { 0x2e, 0x04 }, { 0x2f, 0x50 }, { 0x30, 0x70 }, { 0x31, 0x02 }, + { 0x32, 0x25 }, { 0x33, 0x40 }, { 0x34, 0x01 }, { 0x35, 0x40 }, + { 0x61, 0x2e }, { 0x63, 0x5e }, { 0x65, 0x42 }, { 0x66, 0xd1 }, + { 0x67, 0x20 }, { 0x68, 0x28 }, { 0x69, 0x78 }, { 0x6a, 0x04 }, + { 0x6b, 0xc8 }, { 0x6c, 0x06 }, +}; + +static const struct phy_reg exynos4_sataphy_lane[] = { + { 0x00, 0x02 }, { 0x05, 0x10 }, { 0x06, 0x84 }, { 0x07, 0x04 }, + { 0x08, 0xe0 }, { 0x10, 0x23 }, { 0x13, 0x05 }, { 0x14, 0x30 }, + { 0x15, 0x00 }, { 0x17, 0x70 }, { 0x18, 0xf2 }, { 0x19, 0x1e }, + { 0x1a, 0x18 }, { 0x1b, 0x0d }, { 0x1c, 0x08 }, { 0x50, 0x60 }, + { 0x51, 0x0f }, +}; + +static const struct phy_reg exynos4_sataphy_comlane[] = { + { 0x01, 0x20 }, { 0x03, 0x40 }, { 0x04, 0x3c }, { 0x05, 0x7d }, + { 0x06, 0x1d }, { 0x07, 0xcf }, { 0x08, 0x05 }, { 0x09, 0x63 }, + { 0x0a, 0x29 }, { 0x0b, 0xc4 }, { 0x0c, 0x01 }, { 0x0d, 0x03 }, + { 0x0e, 0x28 }, { 0x0f, 0x98 }, { 0x10, 0x19 }, { 0x13, 0x80 }, + { 0x14, 0xf0 }, { 0x15, 0xd0 }, { 0x39, 0xa0 }, { 0x3a, 0xa0 }, + { 0x3b, 0xa0 }, { 0x3c, 0xa0 }, { 0x3d, 0xa0 }, { 0x3e, 0xa0 }, + { 0x3f, 0xa0 }, { 0x40, 0x42 }, { 0x42, 0x80 }, { 0x43, 0x58 }, + { 0x45, 0x44 }, { 0x46, 0x5c }, { 0x47, 0x86 }, { 0x48, 0x8d }, + { 0x49, 0xd0 }, { 0x4a, 0x09 }, { 0x4b, 0x90 }, { 0x4c, 0x07 }, + { 0x4d, 0x40 }, { 0x51, 0x20 }, { 0x52, 0x32 }, { 0x7f, 0xd8 }, + { 0x80, 0x1a }, { 0x81, 0xff }, { 0x82, 0x11 }, { 0x83, 0x00 }, + { 0x87, 0xf0 }, { 0x87, 0xff }, { 0x87, 0xff }, { 0x87, 0xff }, + { 0x87, 0xff }, { 0x8c, 0x1c }, { 0x8d, 0xc2 }, { 0x8e, 0xc3 }, + { 0x8f, 0x3f }, { 0x90, 0x0a }, { 0x96, 0xf8 }, +}; + +static int wait_for_phy_ready(void __iomem *reg, unsigned long bit) +{ + unsigned long timeout; + + /* wait for maximum of 3 sec */ + timeout = jiffies + msecs_to_jiffies(3000); + while (!(__raw_readl(reg) & bit)) { + if (time_after(jiffies, timeout)) + return -1; + cpu_relax(); + } + return 0; +} + +static int ahci_phy_init(void __iomem *mmio) +{ + int i, ctrl0; + + for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_cmu); i++) + __raw_writeb(exynos4_sataphy_cmu[i].val, + phy_base + (exynos4_sataphy_cmu[i].reg * 4)); + + for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_lane); i++) + __raw_writeb(exynos4_sataphy_lane[i].val, + phy_base + (LANE0 + exynos4_sataphy_lane[i].reg) * 4); + + for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_comlane); i++) + __raw_writeb(exynos4_sataphy_comlane[i].val, + phy_base + (COM_LANE + exynos4_sataphy_comlane[i].reg) * 4); + + __raw_writeb(0x07, phy_base); + + ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0); + ctrl0 |= SATA_CTRL0_PHY_CMU_RST_N; + __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0); + + if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS, + SATA_PHY_STATUS_CMU_OK) < 0) { + printk(KERN_ERR "PHY CMU not ready\n"); + return -EBUSY; + } + + __raw_writeb(0x03, phy_base + (COM_LANE * 4)); + + ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0); + ctrl0 |= SATA_CTRL0_M_PHY_LN_RST_N; + __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0); + + if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS, + SATA_PHY_STATUS_LANE_OK) < 0) { + printk(KERN_ERR "PHY LANE not ready\n"); + return -EBUSY; + } + + ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0); + ctrl0 |= SATA_CTRL0_M_PHY_CAL; + __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0); + + return 0; +} + +static int exynos4_ahci_init(struct device *dev, void __iomem *mmio) +{ + struct clk *clk_sata, *clk_sataphy, *clk_sclk_sata; + int val, ret; + + phy_base = ioremap(EXYNOS4_PA_SATAPHY, SZ_64K); + if (!phy_base) { + dev_err(dev, "failed to allocate memory for SATA PHY\n"); + return -ENOMEM; + } + + phy_ctrl = ioremap(EXYNOS4_PA_SATAPHY_CTRL, SZ_16); + if (!phy_ctrl) { + dev_err(dev, "failed to allocate memory for SATA PHY CTRL\n"); + ret = -ENOMEM; + goto err1; + } + + clk_sata = clk_get(dev, "sata"); + if (IS_ERR(clk_sata)) { + dev_err(dev, "failed to get sata clock\n"); + ret = PTR_ERR(clk_sata); + clk_sata = NULL; + goto err2; + + } + clk_enable(clk_sata); + + clk_sataphy = clk_get(dev, "sataphy"); + if (IS_ERR(clk_sataphy)) { + dev_err(dev, "failed to get sataphy clock\n"); + ret = PTR_ERR(clk_sataphy); + clk_sataphy = NULL; + goto err3; + } + clk_enable(clk_sataphy); + + clk_sclk_sata = clk_get(dev, "sclk_sata"); + if (IS_ERR(clk_sclk_sata)) { + dev_err(dev, "failed to get sclk_sata\n"); + ret = PTR_ERR(clk_sclk_sata); + clk_sclk_sata = NULL; + goto err4; + } + clk_enable(clk_sclk_sata); + clk_set_rate(clk_sclk_sata, SCLK_SATA_FREQ); + + __raw_writel(S5P_PMU_SATA_PHY_CONTROL_EN, S5P_PMU_SATA_PHY_CONTROL); + + /* Enable PHY link control */ + val = SATA_CTRL1_RST_PMALIVE_N | SATA_CTRL1_RST_RXOOB_N | + SATA_CTRL1_RST_RX_N | SATA_CTRL1_RST_TX_N; + __raw_writel(val, phy_ctrl + SATA_CTRL1); + + /* Set communication speed as 3Gbps and enable PHY power */ + val = SATA_CTRL0_RX_DATA_VALID(3) | SATA_CTRL0_SPEED_MODE | + SATA_CTRL0_PHY_POR_N; + __raw_writel(val, phy_ctrl + SATA_CTRL0); + + /* Port0 is available */ + __raw_writel(0x1, mmio + HOST_PORTS_IMPL); + + return ahci_phy_init(mmio); + +err4: + clk_disable(clk_sataphy); + clk_put(clk_sataphy); +err3: + clk_disable(clk_sata); + clk_put(clk_sata); +err2: + iounmap(phy_ctrl); +err1: + iounmap(phy_base); + + return ret; +} + +static struct ahci_platform_data exynos4_ahci_pdata = { + .init = exynos4_ahci_init, +}; + +static struct resource exynos4_ahci_resource[] = { + [0] = { + .start = EXYNOS4_PA_SATA, + .end = EXYNOS4_PA_SATA + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SATA, + .end = IRQ_SATA, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 exynos4_ahci_dmamask = DMA_BIT_MASK(32); + +struct platform_device exynos4_device_ahci = { + .name = "ahci", + .id = -1, + .resource = exynos4_ahci_resource, + .num_resources = ARRAY_SIZE(exynos4_ahci_resource), + .dev = { + .platform_data = &exynos4_ahci_pdata, + .dma_mask = &exynos4_ahci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; diff --git a/arch/arm/mach-s5pv310/dev-audio.c b/arch/arm/mach-exynos4/dev-audio.c index a1964242f0f..1eed5f9f7bd 100644 --- a/arch/arm/mach-s5pv310/dev-audio.c +++ b/arch/arm/mach-exynos4/dev-audio.c @@ -1,4 +1,7 @@ -/* linux/arch/arm/mach-s5pv310/dev-audio.c +/* linux/arch/arm/mach-exynos4/dev-audio.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright (c) 2010 Samsung Electronics Co. Ltd * Jaswinder Singh <jassi.brar@samsung.com> @@ -24,18 +27,18 @@ static const char *rclksrc[] = { [1] = "i2sclk", }; -static int s5pv310_cfg_i2s(struct platform_device *pdev) +static int exynos4_cfg_i2s(struct platform_device *pdev) { /* configure GPIO for i2s port */ switch (pdev->id) { case 0: - s3c_gpio_cfgpin_range(S5PV310_GPZ(0), 7, S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin_range(EXYNOS4_GPZ(0), 7, S3C_GPIO_SFN(2)); break; case 1: - s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(2)); break; case 2: - s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 5, S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 5, S3C_GPIO_SFN(4)); break; default: printk(KERN_ERR "Invalid Device %d\n", pdev->id); @@ -46,7 +49,7 @@ static int s5pv310_cfg_i2s(struct platform_device *pdev) } static struct s3c_audio_pdata i2sv5_pdata = { - .cfg_gpio = s5pv310_cfg_i2s, + .cfg_gpio = exynos4_cfg_i2s, .type = { .i2s = { .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI @@ -56,10 +59,10 @@ static struct s3c_audio_pdata i2sv5_pdata = { }, }; -static struct resource s5pv310_i2s0_resource[] = { +static struct resource exynos4_i2s0_resource[] = { [0] = { - .start = S5PV310_PA_I2S0, - .end = S5PV310_PA_I2S0 + 0x100 - 1, + .start = EXYNOS4_PA_I2S0, + .end = EXYNOS4_PA_I2S0 + 0x100 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -79,11 +82,11 @@ static struct resource s5pv310_i2s0_resource[] = { }, }; -struct platform_device s5pv310_device_i2s0 = { +struct platform_device exynos4_device_i2s0 = { .name = "samsung-i2s", .id = 0, - .num_resources = ARRAY_SIZE(s5pv310_i2s0_resource), - .resource = s5pv310_i2s0_resource, + .num_resources = ARRAY_SIZE(exynos4_i2s0_resource), + .resource = exynos4_i2s0_resource, .dev = { .platform_data = &i2sv5_pdata, }, @@ -95,7 +98,7 @@ static const char *rclksrc_v3[] = { }; static struct s3c_audio_pdata i2sv3_pdata = { - .cfg_gpio = s5pv310_cfg_i2s, + .cfg_gpio = exynos4_cfg_i2s, .type = { .i2s = { .quirks = QUIRK_NO_MUXPSR, @@ -104,10 +107,10 @@ static struct s3c_audio_pdata i2sv3_pdata = { }, }; -static struct resource s5pv310_i2s1_resource[] = { +static struct resource exynos4_i2s1_resource[] = { [0] = { - .start = S5PV310_PA_I2S1, - .end = S5PV310_PA_I2S1 + 0x100 - 1, + .start = EXYNOS4_PA_I2S1, + .end = EXYNOS4_PA_I2S1 + 0x100 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -122,20 +125,20 @@ static struct resource s5pv310_i2s1_resource[] = { }, }; -struct platform_device s5pv310_device_i2s1 = { +struct platform_device exynos4_device_i2s1 = { .name = "samsung-i2s", .id = 1, - .num_resources = ARRAY_SIZE(s5pv310_i2s1_resource), - .resource = s5pv310_i2s1_resource, + .num_resources = ARRAY_SIZE(exynos4_i2s1_resource), + .resource = exynos4_i2s1_resource, .dev = { .platform_data = &i2sv3_pdata, }, }; -static struct resource s5pv310_i2s2_resource[] = { +static struct resource exynos4_i2s2_resource[] = { [0] = { - .start = S5PV310_PA_I2S2, - .end = S5PV310_PA_I2S2 + 0x100 - 1, + .start = EXYNOS4_PA_I2S2, + .end = EXYNOS4_PA_I2S2 + 0x100 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -150,11 +153,11 @@ static struct resource s5pv310_i2s2_resource[] = { }, }; -struct platform_device s5pv310_device_i2s2 = { +struct platform_device exynos4_device_i2s2 = { .name = "samsung-i2s", .id = 2, - .num_resources = ARRAY_SIZE(s5pv310_i2s2_resource), - .resource = s5pv310_i2s2_resource, + .num_resources = ARRAY_SIZE(exynos4_i2s2_resource), + .resource = exynos4_i2s2_resource, .dev = { .platform_data = &i2sv3_pdata, }, @@ -162,17 +165,17 @@ struct platform_device s5pv310_device_i2s2 = { /* PCM Controller platform_devices */ -static int s5pv310_pcm_cfg_gpio(struct platform_device *pdev) +static int exynos4_pcm_cfg_gpio(struct platform_device *pdev) { switch (pdev->id) { case 0: - s3c_gpio_cfgpin_range(S5PV310_GPZ(0), 5, S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin_range(EXYNOS4_GPZ(0), 5, S3C_GPIO_SFN(3)); break; case 1: - s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(3)); break; case 2: - s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 5, S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 5, S3C_GPIO_SFN(3)); break; default: printk(KERN_DEBUG "Invalid PCM Controller number!"); @@ -183,13 +186,13 @@ static int s5pv310_pcm_cfg_gpio(struct platform_device *pdev) } static struct s3c_audio_pdata s3c_pcm_pdata = { - .cfg_gpio = s5pv310_pcm_cfg_gpio, + .cfg_gpio = exynos4_pcm_cfg_gpio, }; -static struct resource s5pv310_pcm0_resource[] = { +static struct resource exynos4_pcm0_resource[] = { [0] = { - .start = S5PV310_PA_PCM0, - .end = S5PV310_PA_PCM0 + 0x100 - 1, + .start = EXYNOS4_PA_PCM0, + .end = EXYNOS4_PA_PCM0 + 0x100 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -204,20 +207,20 @@ static struct resource s5pv310_pcm0_resource[] = { }, }; -struct platform_device s5pv310_device_pcm0 = { +struct platform_device exynos4_device_pcm0 = { .name = "samsung-pcm", .id = 0, - .num_resources = ARRAY_SIZE(s5pv310_pcm0_resource), - .resource = s5pv310_pcm0_resource, + .num_resources = ARRAY_SIZE(exynos4_pcm0_resource), + .resource = exynos4_pcm0_resource, .dev = { .platform_data = &s3c_pcm_pdata, }, }; -static struct resource s5pv310_pcm1_resource[] = { +static struct resource exynos4_pcm1_resource[] = { [0] = { - .start = S5PV310_PA_PCM1, - .end = S5PV310_PA_PCM1 + 0x100 - 1, + .start = EXYNOS4_PA_PCM1, + .end = EXYNOS4_PA_PCM1 + 0x100 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -232,20 +235,20 @@ static struct resource s5pv310_pcm1_resource[] = { }, }; -struct platform_device s5pv310_device_pcm1 = { +struct platform_device exynos4_device_pcm1 = { .name = "samsung-pcm", .id = 1, - .num_resources = ARRAY_SIZE(s5pv310_pcm1_resource), - .resource = s5pv310_pcm1_resource, + .num_resources = ARRAY_SIZE(exynos4_pcm1_resource), + .resource = exynos4_pcm1_resource, .dev = { .platform_data = &s3c_pcm_pdata, }, }; -static struct resource s5pv310_pcm2_resource[] = { +static struct resource exynos4_pcm2_resource[] = { [0] = { - .start = S5PV310_PA_PCM2, - .end = S5PV310_PA_PCM2 + 0x100 - 1, + .start = EXYNOS4_PA_PCM2, + .end = EXYNOS4_PA_PCM2 + 0x100 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -260,11 +263,11 @@ static struct resource s5pv310_pcm2_resource[] = { }, }; -struct platform_device s5pv310_device_pcm2 = { +struct platform_device exynos4_device_pcm2 = { .name = "samsung-pcm", .id = 2, - .num_resources = ARRAY_SIZE(s5pv310_pcm2_resource), - .resource = s5pv310_pcm2_resource, + .num_resources = ARRAY_SIZE(exynos4_pcm2_resource), + .resource = exynos4_pcm2_resource, .dev = { .platform_data = &s3c_pcm_pdata, }, @@ -272,15 +275,15 @@ struct platform_device s5pv310_device_pcm2 = { /* AC97 Controller platform devices */ -static int s5pv310_ac97_cfg_gpio(struct platform_device *pdev) +static int exynos4_ac97_cfg_gpio(struct platform_device *pdev) { - return s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(4)); + return s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(4)); } -static struct resource s5pv310_ac97_resource[] = { +static struct resource exynos4_ac97_resource[] = { [0] = { - .start = S5PV310_PA_AC97, - .end = S5PV310_PA_AC97 + 0x100 - 1, + .start = EXYNOS4_PA_AC97, + .end = EXYNOS4_PA_AC97 + 0x100 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -306,36 +309,36 @@ static struct resource s5pv310_ac97_resource[] = { }; static struct s3c_audio_pdata s3c_ac97_pdata = { - .cfg_gpio = s5pv310_ac97_cfg_gpio, + .cfg_gpio = exynos4_ac97_cfg_gpio, }; -static u64 s5pv310_ac97_dmamask = DMA_BIT_MASK(32); +static u64 exynos4_ac97_dmamask = DMA_BIT_MASK(32); -struct platform_device s5pv310_device_ac97 = { +struct platform_device exynos4_device_ac97 = { .name = "samsung-ac97", .id = -1, - .num_resources = ARRAY_SIZE(s5pv310_ac97_resource), - .resource = s5pv310_ac97_resource, + .num_resources = ARRAY_SIZE(exynos4_ac97_resource), + .resource = exynos4_ac97_resource, .dev = { .platform_data = &s3c_ac97_pdata, - .dma_mask = &s5pv310_ac97_dmamask, + .dma_mask = &exynos4_ac97_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), }, }; /* S/PDIF Controller platform_device */ -static int s5pv310_spdif_cfg_gpio(struct platform_device *pdev) +static int exynos4_spdif_cfg_gpio(struct platform_device *pdev) { - s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 2, S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(3)); return 0; } -static struct resource s5pv310_spdif_resource[] = { +static struct resource exynos4_spdif_resource[] = { [0] = { - .start = S5PV310_PA_SPDIF, - .end = S5PV310_PA_SPDIF + 0x100 - 1, + .start = EXYNOS4_PA_SPDIF, + .end = EXYNOS4_PA_SPDIF + 0x100 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -346,19 +349,19 @@ static struct resource s5pv310_spdif_resource[] = { }; static struct s3c_audio_pdata samsung_spdif_pdata = { - .cfg_gpio = s5pv310_spdif_cfg_gpio, + .cfg_gpio = exynos4_spdif_cfg_gpio, }; -static u64 s5pv310_spdif_dmamask = DMA_BIT_MASK(32); +static u64 exynos4_spdif_dmamask = DMA_BIT_MASK(32); -struct platform_device s5pv310_device_spdif = { +struct platform_device exynos4_device_spdif = { .name = "samsung-spdif", .id = -1, - .num_resources = ARRAY_SIZE(s5pv310_spdif_resource), - .resource = s5pv310_spdif_resource, + .num_resources = ARRAY_SIZE(exynos4_spdif_resource), + .resource = exynos4_spdif_resource, .dev = { .platform_data = &samsung_spdif_pdata, - .dma_mask = &s5pv310_spdif_dmamask, + .dma_mask = &exynos4_spdif_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), }, }; diff --git a/arch/arm/mach-s5pv310/dev-pd.c b/arch/arm/mach-exynos4/dev-pd.c index 58a50c2d0b6..3273f25d6a7 100644 --- a/arch/arm/mach-s5pv310/dev-pd.c +++ b/arch/arm/mach-exynos4/dev-pd.c @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/dev-pd.c +/* linux/arch/arm/mach-exynos4/dev-pd.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * S5PV310 - Power Domain support + * EXYNOS4 - Power Domain support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -19,7 +19,7 @@ #include <plat/pd.h> -static int s5pv310_pd_enable(struct device *dev) +static int exynos4_pd_enable(struct device *dev) { struct samsung_pd_info *pdata = dev->platform_data; u32 timeout; @@ -42,7 +42,7 @@ static int s5pv310_pd_enable(struct device *dev) return 0; } -static int s5pv310_pd_disable(struct device *dev) +static int exynos4_pd_disable(struct device *dev) { struct samsung_pd_info *pdata = dev->platform_data; u32 timeout; @@ -64,14 +64,14 @@ static int s5pv310_pd_disable(struct device *dev) return 0; } -struct platform_device s5pv310_device_pd[] = { +struct platform_device exynos4_device_pd[] = { { .name = "samsung-pd", .id = 0, .dev = { .platform_data = &(struct samsung_pd_info) { - .enable = s5pv310_pd_enable, - .disable = s5pv310_pd_disable, + .enable = exynos4_pd_enable, + .disable = exynos4_pd_disable, .base = S5P_PMU_MFC_CONF, }, }, @@ -80,8 +80,8 @@ struct platform_device s5pv310_device_pd[] = { .id = 1, .dev = { .platform_data = &(struct samsung_pd_info) { - .enable = s5pv310_pd_enable, - .disable = s5pv310_pd_disable, + .enable = exynos4_pd_enable, + .disable = exynos4_pd_disable, .base = S5P_PMU_G3D_CONF, }, }, @@ -90,8 +90,8 @@ struct platform_device s5pv310_device_pd[] = { .id = 2, .dev = { .platform_data = &(struct samsung_pd_info) { - .enable = s5pv310_pd_enable, - .disable = s5pv310_pd_disable, + .enable = exynos4_pd_enable, + .disable = exynos4_pd_disable, .base = S5P_PMU_LCD0_CONF, }, }, @@ -100,8 +100,8 @@ struct platform_device s5pv310_device_pd[] = { .id = 3, .dev = { .platform_data = &(struct samsung_pd_info) { - .enable = s5pv310_pd_enable, - .disable = s5pv310_pd_disable, + .enable = exynos4_pd_enable, + .disable = exynos4_pd_disable, .base = S5P_PMU_LCD1_CONF, }, }, @@ -110,8 +110,8 @@ struct platform_device s5pv310_device_pd[] = { .id = 4, .dev = { .platform_data = &(struct samsung_pd_info) { - .enable = s5pv310_pd_enable, - .disable = s5pv310_pd_disable, + .enable = exynos4_pd_enable, + .disable = exynos4_pd_disable, .base = S5P_PMU_TV_CONF, }, }, @@ -120,8 +120,8 @@ struct platform_device s5pv310_device_pd[] = { .id = 5, .dev = { .platform_data = &(struct samsung_pd_info) { - .enable = s5pv310_pd_enable, - .disable = s5pv310_pd_disable, + .enable = exynos4_pd_enable, + .disable = exynos4_pd_disable, .base = S5P_PMU_CAM_CONF, }, }, @@ -130,8 +130,8 @@ struct platform_device s5pv310_device_pd[] = { .id = 6, .dev = { .platform_data = &(struct samsung_pd_info) { - .enable = s5pv310_pd_enable, - .disable = s5pv310_pd_disable, + .enable = exynos4_pd_enable, + .disable = exynos4_pd_disable, .base = S5P_PMU_GPS_CONF, }, }, diff --git a/arch/arm/mach-s5pv310/dev-sysmmu.c b/arch/arm/mach-exynos4/dev-sysmmu.c index e1bb200ac0f..3b7cae0fe23 100644 --- a/arch/arm/mach-s5pv310/dev-sysmmu.c +++ b/arch/arm/mach-exynos4/dev-sysmmu.c @@ -1,8 +1,10 @@ -/* linux/arch/arm/mach-s5pv310/dev-sysmmu.c +/* linux/arch/arm/mach-exynos4/dev-sysmmu.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com * + * EXYNOS4 - System MMU support + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -13,11 +15,33 @@ #include <mach/map.h> #include <mach/irqs.h> +#include <mach/sysmmu.h> +#include <plat/s5p-clock.h> + +/* These names must be equal to the clock names in mach-exynos4/clock.c */ +const char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM] = { + "SYSMMU_MDMA" , + "SYSMMU_SSS" , + "SYSMMU_FIMC0" , + "SYSMMU_FIMC1" , + "SYSMMU_FIMC2" , + "SYSMMU_FIMC3" , + "SYSMMU_JPEG" , + "SYSMMU_FIMD0" , + "SYSMMU_FIMD1" , + "SYSMMU_PCIe" , + "SYSMMU_G2D" , + "SYSMMU_ROTATOR", + "SYSMMU_MDMA2" , + "SYSMMU_TV" , + "SYSMMU_MFC_L" , + "SYSMMU_MFC_R" , +}; -static struct resource s5pv310_sysmmu_resource[] = { +static struct resource exynos4_sysmmu_resource[] = { [0] = { - .start = S5PV310_PA_SYSMMU_MDMA, - .end = S5PV310_PA_SYSMMU_MDMA + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_MDMA, + .end = EXYNOS4_PA_SYSMMU_MDMA + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -26,8 +50,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [2] = { - .start = S5PV310_PA_SYSMMU_SSS, - .end = S5PV310_PA_SYSMMU_SSS + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_SSS, + .end = EXYNOS4_PA_SYSMMU_SSS + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [3] = { @@ -36,8 +60,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [4] = { - .start = S5PV310_PA_SYSMMU_FIMC0, - .end = S5PV310_PA_SYSMMU_FIMC0 + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_FIMC0, + .end = EXYNOS4_PA_SYSMMU_FIMC0 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [5] = { @@ -46,8 +70,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [6] = { - .start = S5PV310_PA_SYSMMU_FIMC1, - .end = S5PV310_PA_SYSMMU_FIMC1 + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_FIMC1, + .end = EXYNOS4_PA_SYSMMU_FIMC1 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [7] = { @@ -56,8 +80,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [8] = { - .start = S5PV310_PA_SYSMMU_FIMC2, - .end = S5PV310_PA_SYSMMU_FIMC2 + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_FIMC2, + .end = EXYNOS4_PA_SYSMMU_FIMC2 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [9] = { @@ -66,8 +90,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [10] = { - .start = S5PV310_PA_SYSMMU_FIMC3, - .end = S5PV310_PA_SYSMMU_FIMC3 + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_FIMC3, + .end = EXYNOS4_PA_SYSMMU_FIMC3 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [11] = { @@ -76,8 +100,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [12] = { - .start = S5PV310_PA_SYSMMU_JPEG, - .end = S5PV310_PA_SYSMMU_JPEG + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_JPEG, + .end = EXYNOS4_PA_SYSMMU_JPEG + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [13] = { @@ -86,8 +110,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [14] = { - .start = S5PV310_PA_SYSMMU_FIMD0, - .end = S5PV310_PA_SYSMMU_FIMD0 + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_FIMD0, + .end = EXYNOS4_PA_SYSMMU_FIMD0 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [15] = { @@ -96,8 +120,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [16] = { - .start = S5PV310_PA_SYSMMU_FIMD1, - .end = S5PV310_PA_SYSMMU_FIMD1 + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_FIMD1, + .end = EXYNOS4_PA_SYSMMU_FIMD1 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [17] = { @@ -106,8 +130,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [18] = { - .start = S5PV310_PA_SYSMMU_PCIe, - .end = S5PV310_PA_SYSMMU_PCIe + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_PCIe, + .end = EXYNOS4_PA_SYSMMU_PCIe + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [19] = { @@ -116,8 +140,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [20] = { - .start = S5PV310_PA_SYSMMU_G2D, - .end = S5PV310_PA_SYSMMU_G2D + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_G2D, + .end = EXYNOS4_PA_SYSMMU_G2D + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [21] = { @@ -126,8 +150,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [22] = { - .start = S5PV310_PA_SYSMMU_ROTATOR, - .end = S5PV310_PA_SYSMMU_ROTATOR + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_ROTATOR, + .end = EXYNOS4_PA_SYSMMU_ROTATOR + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [23] = { @@ -136,8 +160,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [24] = { - .start = S5PV310_PA_SYSMMU_MDMA2, - .end = S5PV310_PA_SYSMMU_MDMA2 + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_MDMA2, + .end = EXYNOS4_PA_SYSMMU_MDMA2 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [25] = { @@ -146,8 +170,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [26] = { - .start = S5PV310_PA_SYSMMU_TV, - .end = S5PV310_PA_SYSMMU_TV + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_TV, + .end = EXYNOS4_PA_SYSMMU_TV + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [27] = { @@ -156,8 +180,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [28] = { - .start = S5PV310_PA_SYSMMU_MFC_L, - .end = S5PV310_PA_SYSMMU_MFC_L + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_MFC_L, + .end = EXYNOS4_PA_SYSMMU_MFC_L + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [29] = { @@ -166,8 +190,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [30] = { - .start = S5PV310_PA_SYSMMU_MFC_R, - .end = S5PV310_PA_SYSMMU_MFC_R + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_MFC_R, + .end = EXYNOS4_PA_SYSMMU_MFC_R + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [31] = { @@ -177,11 +201,32 @@ static struct resource s5pv310_sysmmu_resource[] = { }, }; -struct platform_device s5pv310_device_sysmmu = { +struct platform_device exynos4_device_sysmmu = { .name = "s5p-sysmmu", .id = 32, - .num_resources = ARRAY_SIZE(s5pv310_sysmmu_resource), - .resource = s5pv310_sysmmu_resource, + .num_resources = ARRAY_SIZE(exynos4_sysmmu_resource), + .resource = exynos4_sysmmu_resource, }; +EXPORT_SYMBOL(exynos4_device_sysmmu); + +static struct clk *sysmmu_clk[S5P_SYSMMU_TOTAL_IPNUM]; +void sysmmu_clk_init(struct device *dev, sysmmu_ips ips) +{ + sysmmu_clk[ips] = clk_get(dev, sysmmu_ips_name[ips]); + if (IS_ERR(sysmmu_clk[ips])) + sysmmu_clk[ips] = NULL; + else + clk_put(sysmmu_clk[ips]); +} + +void sysmmu_clk_enable(sysmmu_ips ips) +{ + if (sysmmu_clk[ips]) + clk_enable(sysmmu_clk[ips]); +} -EXPORT_SYMBOL(s5pv310_device_sysmmu); +void sysmmu_clk_disable(sysmmu_ips ips) +{ + if (sysmmu_clk[ips]) + clk_disable(sysmmu_clk[ips]); +} diff --git a/arch/arm/mach-s5pv310/dma.c b/arch/arm/mach-exynos4/dma.c index 20066c7c9e5..564bb530f33 100644 --- a/arch/arm/mach-s5pv310/dma.c +++ b/arch/arm/mach-exynos4/dma.c @@ -1,4 +1,8 @@ -/* +/* linux/arch/arm/mach-exynos4/dma.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * * Copyright (C) 2010 Samsung Electronics Co. Ltd. * Jaswinder Singh <jassi.brar@samsung.com> * @@ -30,10 +34,10 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -static struct resource s5pv310_pdma0_resource[] = { +static struct resource exynos4_pdma0_resource[] = { [0] = { - .start = S5PV310_PA_PDMA0, - .end = S5PV310_PA_PDMA0 + SZ_4K, + .start = EXYNOS4_PA_PDMA0, + .end = EXYNOS4_PA_PDMA0 + SZ_4K, .flags = IORESOURCE_MEM, }, [1] = { @@ -43,7 +47,7 @@ static struct resource s5pv310_pdma0_resource[] = { }, }; -static struct s3c_pl330_platdata s5pv310_pdma0_pdata = { +static struct s3c_pl330_platdata exynos4_pdma0_pdata = { .peri = { [0] = DMACH_PCM0_RX, [1] = DMACH_PCM0_TX, @@ -80,22 +84,22 @@ static struct s3c_pl330_platdata s5pv310_pdma0_pdata = { }, }; -static struct platform_device s5pv310_device_pdma0 = { +static struct platform_device exynos4_device_pdma0 = { .name = "s3c-pl330", .id = 0, - .num_resources = ARRAY_SIZE(s5pv310_pdma0_resource), - .resource = s5pv310_pdma0_resource, + .num_resources = ARRAY_SIZE(exynos4_pdma0_resource), + .resource = exynos4_pdma0_resource, .dev = { .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pv310_pdma0_pdata, + .platform_data = &exynos4_pdma0_pdata, }, }; -static struct resource s5pv310_pdma1_resource[] = { +static struct resource exynos4_pdma1_resource[] = { [0] = { - .start = S5PV310_PA_PDMA1, - .end = S5PV310_PA_PDMA1 + SZ_4K, + .start = EXYNOS4_PA_PDMA1, + .end = EXYNOS4_PA_PDMA1 + SZ_4K, .flags = IORESOURCE_MEM, }, [1] = { @@ -105,7 +109,7 @@ static struct resource s5pv310_pdma1_resource[] = { }, }; -static struct s3c_pl330_platdata s5pv310_pdma1_pdata = { +static struct s3c_pl330_platdata exynos4_pdma1_pdata = { .peri = { [0] = DMACH_PCM0_RX, [1] = DMACH_PCM0_TX, @@ -142,27 +146,27 @@ static struct s3c_pl330_platdata s5pv310_pdma1_pdata = { }, }; -static struct platform_device s5pv310_device_pdma1 = { +static struct platform_device exynos4_device_pdma1 = { .name = "s3c-pl330", .id = 1, - .num_resources = ARRAY_SIZE(s5pv310_pdma1_resource), - .resource = s5pv310_pdma1_resource, + .num_resources = ARRAY_SIZE(exynos4_pdma1_resource), + .resource = exynos4_pdma1_resource, .dev = { .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pv310_pdma1_pdata, + .platform_data = &exynos4_pdma1_pdata, }, }; -static struct platform_device *s5pv310_dmacs[] __initdata = { - &s5pv310_device_pdma0, - &s5pv310_device_pdma1, +static struct platform_device *exynos4_dmacs[] __initdata = { + &exynos4_device_pdma0, + &exynos4_device_pdma1, }; -static int __init s5pv310_dma_init(void) +static int __init exynos4_dma_init(void) { - platform_add_devices(s5pv310_dmacs, ARRAY_SIZE(s5pv310_dmacs)); + platform_add_devices(exynos4_dmacs, ARRAY_SIZE(exynos4_dmacs)); return 0; } -arch_initcall(s5pv310_dma_init); +arch_initcall(exynos4_dma_init); diff --git a/arch/arm/mach-exynos4/gpiolib.c b/arch/arm/mach-exynos4/gpiolib.c new file mode 100644 index 00000000000..d54ca6adb66 --- /dev/null +++ b/arch/arm/mach-exynos4/gpiolib.c @@ -0,0 +1,365 @@ +/* linux/arch/arm/mach-exynos4/gpiolib.c + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <mach/map.h> + +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> + +static struct s3c_gpio_cfg gpio_cfg = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_cfg_noint = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +/* + * Following are the gpio banks in v310. + * + * The 'config' member when left to NULL, is initialized to the default + * structure gpio_cfg in the init function below. + * + * The 'base' member is also initialized in the init function below. + * Note: The initialization of 'base' member of s3c_gpio_chip structure + * uses the above macro and depends on the banks being listed in order here. + */ +static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = { + { + .chip = { + .base = EXYNOS4_GPA0(0), + .ngpio = EXYNOS4_GPIO_A0_NR, + .label = "GPA0", + }, + }, { + .chip = { + .base = EXYNOS4_GPA1(0), + .ngpio = EXYNOS4_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .chip = { + .base = EXYNOS4_GPB(0), + .ngpio = EXYNOS4_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = EXYNOS4_GPC0(0), + .ngpio = EXYNOS4_GPIO_C0_NR, + .label = "GPC0", + }, + }, { + .chip = { + .base = EXYNOS4_GPC1(0), + .ngpio = EXYNOS4_GPIO_C1_NR, + .label = "GPC1", + }, + }, { + .chip = { + .base = EXYNOS4_GPD0(0), + .ngpio = EXYNOS4_GPIO_D0_NR, + .label = "GPD0", + }, + }, { + .chip = { + .base = EXYNOS4_GPD1(0), + .ngpio = EXYNOS4_GPIO_D1_NR, + .label = "GPD1", + }, + }, { + .chip = { + .base = EXYNOS4_GPE0(0), + .ngpio = EXYNOS4_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .chip = { + .base = EXYNOS4_GPE1(0), + .ngpio = EXYNOS4_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .chip = { + .base = EXYNOS4_GPE2(0), + .ngpio = EXYNOS4_GPIO_E2_NR, + .label = "GPE2", + }, + }, { + .chip = { + .base = EXYNOS4_GPE3(0), + .ngpio = EXYNOS4_GPIO_E3_NR, + .label = "GPE3", + }, + }, { + .chip = { + .base = EXYNOS4_GPE4(0), + .ngpio = EXYNOS4_GPIO_E4_NR, + .label = "GPE4", + }, + }, { + .chip = { + .base = EXYNOS4_GPF0(0), + .ngpio = EXYNOS4_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .chip = { + .base = EXYNOS4_GPF1(0), + .ngpio = EXYNOS4_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .chip = { + .base = EXYNOS4_GPF2(0), + .ngpio = EXYNOS4_GPIO_F2_NR, + .label = "GPF2", + }, + }, { + .chip = { + .base = EXYNOS4_GPF3(0), + .ngpio = EXYNOS4_GPIO_F3_NR, + .label = "GPF3", + }, + }, +}; + +static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = { + { + .chip = { + .base = EXYNOS4_GPJ0(0), + .ngpio = EXYNOS4_GPIO_J0_NR, + .label = "GPJ0", + }, + }, { + .chip = { + .base = EXYNOS4_GPJ1(0), + .ngpio = EXYNOS4_GPIO_J1_NR, + .label = "GPJ1", + }, + }, { + .chip = { + .base = EXYNOS4_GPK0(0), + .ngpio = EXYNOS4_GPIO_K0_NR, + .label = "GPK0", + }, + }, { + .chip = { + .base = EXYNOS4_GPK1(0), + .ngpio = EXYNOS4_GPIO_K1_NR, + .label = "GPK1", + }, + }, { + .chip = { + .base = EXYNOS4_GPK2(0), + .ngpio = EXYNOS4_GPIO_K2_NR, + .label = "GPK2", + }, + }, { + .chip = { + .base = EXYNOS4_GPK3(0), + .ngpio = EXYNOS4_GPIO_K3_NR, + .label = "GPK3", + }, + }, { + .chip = { + .base = EXYNOS4_GPL0(0), + .ngpio = EXYNOS4_GPIO_L0_NR, + .label = "GPL0", + }, + }, { + .chip = { + .base = EXYNOS4_GPL1(0), + .ngpio = EXYNOS4_GPIO_L1_NR, + .label = "GPL1", + }, + }, { + .chip = { + .base = EXYNOS4_GPL2(0), + .ngpio = EXYNOS4_GPIO_L2_NR, + .label = "GPL2", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = EXYNOS4_GPY0(0), + .ngpio = EXYNOS4_GPIO_Y0_NR, + .label = "GPY0", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = EXYNOS4_GPY1(0), + .ngpio = EXYNOS4_GPIO_Y1_NR, + .label = "GPY1", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = EXYNOS4_GPY2(0), + .ngpio = EXYNOS4_GPIO_Y2_NR, + .label = "GPY2", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = EXYNOS4_GPY3(0), + .ngpio = EXYNOS4_GPIO_Y3_NR, + .label = "GPY3", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = EXYNOS4_GPY4(0), + .ngpio = EXYNOS4_GPIO_Y4_NR, + .label = "GPY4", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = EXYNOS4_GPY5(0), + .ngpio = EXYNOS4_GPIO_Y5_NR, + .label = "GPY5", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = EXYNOS4_GPY6(0), + .ngpio = EXYNOS4_GPIO_Y6_NR, + .label = "GPY6", + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC00), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(0), + .chip = { + .base = EXYNOS4_GPX0(0), + .ngpio = EXYNOS4_GPIO_X0_NR, + .label = "GPX0", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC20), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(8), + .chip = { + .base = EXYNOS4_GPX1(0), + .ngpio = EXYNOS4_GPIO_X1_NR, + .label = "GPX1", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC40), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(16), + .chip = { + .base = EXYNOS4_GPX2(0), + .ngpio = EXYNOS4_GPIO_X2_NR, + .label = "GPX2", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC60), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(24), + .chip = { + .base = EXYNOS4_GPX3(0), + .ngpio = EXYNOS4_GPIO_X3_NR, + .label = "GPX3", + .to_irq = samsung_gpiolib_to_irq, + }, + }, +}; + +static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = { + { + .chip = { + .base = EXYNOS4_GPZ(0), + .ngpio = EXYNOS4_GPIO_Z_NR, + .label = "GPZ", + }, + }, +}; + +static __init int exynos4_gpiolib_init(void) +{ + struct s3c_gpio_chip *chip; + int i; + int group = 0; + int nr_chips; + + /* GPIO part 1 */ + + chip = exynos4_gpio_part1_4bit; + nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit); + + for (i = 0; i < nr_chips; i++, chip++) { + if (chip->config == NULL) { + chip->config = &gpio_cfg; + /* Assign the GPIO interrupt group */ + chip->group = group++; + } + if (chip->base == NULL) + chip->base = S5P_VA_GPIO1 + (i) * 0x20; + } + + samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips); + + /* GPIO part 2 */ + + chip = exynos4_gpio_part2_4bit; + nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit); + + for (i = 0; i < nr_chips; i++, chip++) { + if (chip->config == NULL) { + chip->config = &gpio_cfg; + /* Assign the GPIO interrupt group */ + chip->group = group++; + } + if (chip->base == NULL) + chip->base = S5P_VA_GPIO2 + (i) * 0x20; + } + + samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips); + + /* GPIO part 3 */ + + chip = exynos4_gpio_part3_4bit; + nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit); + + for (i = 0; i < nr_chips; i++, chip++) { + if (chip->config == NULL) { + chip->config = &gpio_cfg; + /* Assign the GPIO interrupt group */ + chip->group = group++; + } + if (chip->base == NULL) + chip->base = S5P_VA_GPIO3 + (i) * 0x20; + } + + samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips); + s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS); + s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS); + + return 0; +} +core_initcall(exynos4_gpiolib_init); diff --git a/arch/arm/mach-s5pv310/headsmp.S b/arch/arm/mach-exynos4/headsmp.S index 164b7b04571..6c6cfc50c46 100644 --- a/arch/arm/mach-s5pv310/headsmp.S +++ b/arch/arm/mach-exynos4/headsmp.S @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-s5pv310/headsmp.S + * linux/arch/arm/mach-exynos4/headsmp.S * * Cloned from linux/arch/arm/mach-realview/headsmp.S * @@ -16,11 +16,11 @@ __INIT /* - * s5pv310 specific entry point for secondary CPUs. This provides + * exynos4 specific entry point for secondary CPUs. This provides * a "holding pen" into which all secondary cores are held until we're * ready for them to initialise. */ -ENTRY(s5pv310_secondary_startup) +ENTRY(exynos4_secondary_startup) mrc p15, 0, r0, c0, c0, 5 and r0, r0, #15 adr r4, 1f diff --git a/arch/arm/mach-s5pv310/hotplug.c b/arch/arm/mach-exynos4/hotplug.c index c24235c89ee..2b5909e2ccd 100644 --- a/arch/arm/mach-s5pv310/hotplug.c +++ b/arch/arm/mach-exynos4/hotplug.c @@ -1,4 +1,4 @@ -/* linux arch/arm/mach-s5pv310/hotplug.c +/* linux arch/arm/mach-exynos4/hotplug.c * * Cloned from linux/arch/arm/mach-realview/hotplug.c * @@ -30,13 +30,13 @@ static inline void cpu_enter_lowpower(void) * Turn off coherency */ " mrc p15, 0, %0, c1, c0, 1\n" - " bic %0, %0, #0x20\n" + " bic %0, %0, %3\n" " mcr p15, 0, %0, c1, c0, 1\n" " mrc p15, 0, %0, c1, c0, 0\n" " bic %0, %0, %2\n" " mcr p15, 0, %0, c1, c0, 0\n" : "=&r" (v) - : "r" (0), "Ir" (CR_C) + : "r" (0), "Ir" (CR_C), "Ir" (0x40) : "cc"); } @@ -49,10 +49,10 @@ static inline void cpu_leave_lowpower(void) " orr %0, %0, %1\n" " mcr p15, 0, %0, c1, c0, 0\n" " mrc p15, 0, %0, c1, c0, 1\n" - " orr %0, %0, #0x20\n" + " orr %0, %0, %2\n" " mcr p15, 0, %0, c1, c0, 1\n" : "=&r" (v) - : "Ir" (CR_C) + : "Ir" (CR_C), "Ir" (0x40) : "cc"); } diff --git a/arch/arm/mach-s5pv310/include/mach/debug-macro.S b/arch/arm/mach-exynos4/include/mach/debug-macro.S index b0d920c474d..58bbd049a6c 100644 --- a/arch/arm/mach-s5pv310/include/mach/debug-macro.S +++ b/arch/arm/mach-exynos4/include/mach/debug-macro.S @@ -1,7 +1,7 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/debug-macro.S +/* linux/arch/arm/mach-exynos4/include/mach/debug-macro.S * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S * diff --git a/arch/arm/mach-s5pv310/include/mach/dma.h b/arch/arm/mach-exynos4/include/mach/dma.h index 81209eb1409..81209eb1409 100644 --- a/arch/arm/mach-s5pv310/include/mach/dma.h +++ b/arch/arm/mach-exynos4/include/mach/dma.h diff --git a/arch/arm/mach-s5pv310/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S index e600e1d522d..d8f38c2e565 100644 --- a/arch/arm/mach-s5pv310/include/mach/entry-macro.S +++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S @@ -1,8 +1,8 @@ -/* arch/arm/mach-s5pv310/include/mach/entry-macro.S +/* arch/arm/mach-exynos4/include/mach/entry-macro.S * * Cloned from arch/arm/mach-realview/include/mach/entry-macro.S * - * Low-level IRQ helper macros for S5PV310 platforms + * Low-level IRQ helper macros for EXYNOS4 platforms * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-exynos4/include/mach/gpio.h b/arch/arm/mach-exynos4/include/mach/gpio.h new file mode 100644 index 00000000000..939728b38d4 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/gpio.h @@ -0,0 +1,156 @@ +/* linux/arch/arm/mach-exynos4/include/mach/gpio.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - GPIO lib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H __FILE__ + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +/* Practically, GPIO banks upto GPZ are the configurable gpio banks */ + +/* GPIO bank sizes */ +#define EXYNOS4_GPIO_A0_NR (8) +#define EXYNOS4_GPIO_A1_NR (6) +#define EXYNOS4_GPIO_B_NR (8) +#define EXYNOS4_GPIO_C0_NR (5) +#define EXYNOS4_GPIO_C1_NR (5) +#define EXYNOS4_GPIO_D0_NR (4) +#define EXYNOS4_GPIO_D1_NR (4) +#define EXYNOS4_GPIO_E0_NR (5) +#define EXYNOS4_GPIO_E1_NR (8) +#define EXYNOS4_GPIO_E2_NR (6) +#define EXYNOS4_GPIO_E3_NR (8) +#define EXYNOS4_GPIO_E4_NR (8) +#define EXYNOS4_GPIO_F0_NR (8) +#define EXYNOS4_GPIO_F1_NR (8) +#define EXYNOS4_GPIO_F2_NR (8) +#define EXYNOS4_GPIO_F3_NR (6) +#define EXYNOS4_GPIO_J0_NR (8) +#define EXYNOS4_GPIO_J1_NR (5) +#define EXYNOS4_GPIO_K0_NR (7) +#define EXYNOS4_GPIO_K1_NR (7) +#define EXYNOS4_GPIO_K2_NR (7) +#define EXYNOS4_GPIO_K3_NR (7) +#define EXYNOS4_GPIO_L0_NR (8) +#define EXYNOS4_GPIO_L1_NR (3) +#define EXYNOS4_GPIO_L2_NR (8) +#define EXYNOS4_GPIO_X0_NR (8) +#define EXYNOS4_GPIO_X1_NR (8) +#define EXYNOS4_GPIO_X2_NR (8) +#define EXYNOS4_GPIO_X3_NR (8) +#define EXYNOS4_GPIO_Y0_NR (6) +#define EXYNOS4_GPIO_Y1_NR (4) +#define EXYNOS4_GPIO_Y2_NR (6) +#define EXYNOS4_GPIO_Y3_NR (8) +#define EXYNOS4_GPIO_Y4_NR (8) +#define EXYNOS4_GPIO_Y5_NR (8) +#define EXYNOS4_GPIO_Y6_NR (8) +#define EXYNOS4_GPIO_Z_NR (7) + +/* GPIO bank numbers */ + +#define EXYNOS4_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) + +enum s5p_gpio_number { + EXYNOS4_GPIO_A0_START = 0, + EXYNOS4_GPIO_A1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_A0), + EXYNOS4_GPIO_B_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_A1), + EXYNOS4_GPIO_C0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_B), + EXYNOS4_GPIO_C1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_C0), + EXYNOS4_GPIO_D0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_C1), + EXYNOS4_GPIO_D1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_D0), + EXYNOS4_GPIO_E0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_D1), + EXYNOS4_GPIO_E1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E0), + EXYNOS4_GPIO_E2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E1), + EXYNOS4_GPIO_E3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E2), + EXYNOS4_GPIO_E4_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E3), + EXYNOS4_GPIO_F0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E4), + EXYNOS4_GPIO_F1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F0), + EXYNOS4_GPIO_F2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F1), + EXYNOS4_GPIO_F3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F2), + EXYNOS4_GPIO_J0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F3), + EXYNOS4_GPIO_J1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_J0), + EXYNOS4_GPIO_K0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_J1), + EXYNOS4_GPIO_K1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K0), + EXYNOS4_GPIO_K2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K1), + EXYNOS4_GPIO_K3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K2), + EXYNOS4_GPIO_L0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K3), + EXYNOS4_GPIO_L1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L0), + EXYNOS4_GPIO_L2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L1), + EXYNOS4_GPIO_X0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L2), + EXYNOS4_GPIO_X1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X0), + EXYNOS4_GPIO_X2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X1), + EXYNOS4_GPIO_X3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X2), + EXYNOS4_GPIO_Y0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X3), + EXYNOS4_GPIO_Y1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y0), + EXYNOS4_GPIO_Y2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y1), + EXYNOS4_GPIO_Y3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y2), + EXYNOS4_GPIO_Y4_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y3), + EXYNOS4_GPIO_Y5_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y4), + EXYNOS4_GPIO_Y6_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y5), + EXYNOS4_GPIO_Z_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y6), +}; + +/* EXYNOS4 GPIO number definitions */ +#define EXYNOS4_GPA0(_nr) (EXYNOS4_GPIO_A0_START + (_nr)) +#define EXYNOS4_GPA1(_nr) (EXYNOS4_GPIO_A1_START + (_nr)) +#define EXYNOS4_GPB(_nr) (EXYNOS4_GPIO_B_START + (_nr)) +#define EXYNOS4_GPC0(_nr) (EXYNOS4_GPIO_C0_START + (_nr)) +#define EXYNOS4_GPC1(_nr) (EXYNOS4_GPIO_C1_START + (_nr)) +#define EXYNOS4_GPD0(_nr) (EXYNOS4_GPIO_D0_START + (_nr)) +#define EXYNOS4_GPD1(_nr) (EXYNOS4_GPIO_D1_START + (_nr)) +#define EXYNOS4_GPE0(_nr) (EXYNOS4_GPIO_E0_START + (_nr)) +#define EXYNOS4_GPE1(_nr) (EXYNOS4_GPIO_E1_START + (_nr)) +#define EXYNOS4_GPE2(_nr) (EXYNOS4_GPIO_E2_START + (_nr)) +#define EXYNOS4_GPE3(_nr) (EXYNOS4_GPIO_E3_START + (_nr)) +#define EXYNOS4_GPE4(_nr) (EXYNOS4_GPIO_E4_START + (_nr)) +#define EXYNOS4_GPF0(_nr) (EXYNOS4_GPIO_F0_START + (_nr)) +#define EXYNOS4_GPF1(_nr) (EXYNOS4_GPIO_F1_START + (_nr)) +#define EXYNOS4_GPF2(_nr) (EXYNOS4_GPIO_F2_START + (_nr)) +#define EXYNOS4_GPF3(_nr) (EXYNOS4_GPIO_F3_START + (_nr)) +#define EXYNOS4_GPJ0(_nr) (EXYNOS4_GPIO_J0_START + (_nr)) +#define EXYNOS4_GPJ1(_nr) (EXYNOS4_GPIO_J1_START + (_nr)) +#define EXYNOS4_GPK0(_nr) (EXYNOS4_GPIO_K0_START + (_nr)) +#define EXYNOS4_GPK1(_nr) (EXYNOS4_GPIO_K1_START + (_nr)) +#define EXYNOS4_GPK2(_nr) (EXYNOS4_GPIO_K2_START + (_nr)) +#define EXYNOS4_GPK3(_nr) (EXYNOS4_GPIO_K3_START + (_nr)) +#define EXYNOS4_GPL0(_nr) (EXYNOS4_GPIO_L0_START + (_nr)) +#define EXYNOS4_GPL1(_nr) (EXYNOS4_GPIO_L1_START + (_nr)) +#define EXYNOS4_GPL2(_nr) (EXYNOS4_GPIO_L2_START + (_nr)) +#define EXYNOS4_GPX0(_nr) (EXYNOS4_GPIO_X0_START + (_nr)) +#define EXYNOS4_GPX1(_nr) (EXYNOS4_GPIO_X1_START + (_nr)) +#define EXYNOS4_GPX2(_nr) (EXYNOS4_GPIO_X2_START + (_nr)) +#define EXYNOS4_GPX3(_nr) (EXYNOS4_GPIO_X3_START + (_nr)) +#define EXYNOS4_GPY0(_nr) (EXYNOS4_GPIO_Y0_START + (_nr)) +#define EXYNOS4_GPY1(_nr) (EXYNOS4_GPIO_Y1_START + (_nr)) +#define EXYNOS4_GPY2(_nr) (EXYNOS4_GPIO_Y2_START + (_nr)) +#define EXYNOS4_GPY3(_nr) (EXYNOS4_GPIO_Y3_START + (_nr)) +#define EXYNOS4_GPY4(_nr) (EXYNOS4_GPIO_Y4_START + (_nr)) +#define EXYNOS4_GPY5(_nr) (EXYNOS4_GPIO_Y5_START + (_nr)) +#define EXYNOS4_GPY6(_nr) (EXYNOS4_GPIO_Y6_START + (_nr)) +#define EXYNOS4_GPZ(_nr) (EXYNOS4_GPIO_Z_START + (_nr)) + +/* the end of the EXYNOS4 specific gpios */ +#define EXYNOS4_GPIO_END (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + 1) +#define S3C_GPIO_END EXYNOS4_GPIO_END + +/* define the number of gpios we need to the one after the GPZ() range */ +#define ARCH_NR_GPIOS (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + \ + CONFIG_SAMSUNG_GPIO_EXTRA + 1) + +#include <asm-generic/gpio.h> + +#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/hardware.h b/arch/arm/mach-exynos4/include/mach/hardware.h index 28ff9881f1a..5109eb232f2 100644 --- a/arch/arm/mach-s5pv310/include/mach/hardware.h +++ b/arch/arm/mach-exynos4/include/mach/hardware.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/hardware.h +/* linux/arch/arm/mach-exynos4/include/mach/hardware.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5PV310 - Hardware support + * EXYNOS4 - Hardware support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5pv310/include/mach/io.h b/arch/arm/mach-exynos4/include/mach/io.h index 8a7f9128391..d5478d24753 100644 --- a/arch/arm/mach-s5pv310/include/mach/io.h +++ b/arch/arm/mach-exynos4/include/mach/io.h @@ -1,13 +1,13 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/io.h +/* linux/arch/arm/mach-exynos4/include/mach/io.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org> * * Based on arch/arm/mach-s5p6442/include/mach/io.h * - * Default IO routines for S5PV310 + * Default IO routines for EXYNOS4 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5pv310/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h index 536b0b59fc8..5d037301d21 100644 --- a/arch/arm/mach-s5pv310/include/mach/irqs.h +++ b/arch/arm/mach-exynos4/include/mach/irqs.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/irqs.h +/* linux/arch/arm/mach-exynos4/include/mach/irqs.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5PV310 - IRQ definitions + * EXYNOS4 - IRQ definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -85,6 +85,9 @@ #define IRQ_RTC_ALARM COMBINER_IRQ(23, 0) #define IRQ_RTC_TIC COMBINER_IRQ(23, 1) +#define IRQ_GPIO_XB COMBINER_IRQ(24, 0) +#define IRQ_GPIO_XA COMBINER_IRQ(24, 1) + #define IRQ_UART0 COMBINER_IRQ(26, 0) #define IRQ_UART1 COMBINER_IRQ(26, 1) #define IRQ_UART2 COMBINER_IRQ(26, 2) @@ -108,6 +111,11 @@ #define IRQ_MIPI_CSIS0 COMBINER_IRQ(30, 0) #define IRQ_MIPI_CSIS1 COMBINER_IRQ(30, 1) +#define IRQ_FIMC0 COMBINER_IRQ(32, 0) +#define IRQ_FIMC1 COMBINER_IRQ(32, 1) +#define IRQ_FIMC2 COMBINER_IRQ(33, 0) +#define IRQ_FIMC3 COMBINER_IRQ(33, 1) + #define IRQ_ONENAND_AUDI COMBINER_IRQ(34, 0) #define IRQ_MCT_L1 COMBINER_IRQ(35, 3) @@ -131,6 +139,7 @@ #define IRQ_MCT_L0 COMBINER_IRQ(51, 0) #define IRQ_WDT COMBINER_IRQ(53, 0) +#define IRQ_MCT_G0 COMBINER_IRQ(53, 4) #define MAX_COMBINER_NR 54 @@ -139,8 +148,13 @@ #define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE + 0) #define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE + 16) -/* Set the default NR_IRQS */ +/* optional GPIO interrupts */ +#define S5P_GPIOINT_BASE (S5P_IRQ_EINT_BASE + 32) +#define IRQ_GPIO1_NR_GROUPS 16 +#define IRQ_GPIO2_NR_GROUPS 9 +#define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT) -#define NR_IRQS (S5P_IRQ_EINT_BASE + 32) +/* Set the default NR_IRQS */ +#define NR_IRQS (IRQ_GPIO_END) #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h new file mode 100644 index 00000000000..6330b73b9ea --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/map.h @@ -0,0 +1,162 @@ +/* linux/arch/arm/mach-exynos4/include/mach/map.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * EXYNOS4 - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MAP_H +#define __ASM_ARCH_MAP_H __FILE__ + +#include <plat/map-base.h> + +/* + * EXYNOS4 UART offset is 0x10000 but the older S5P SoCs are 0x400. + * So need to define it, and here is to avoid redefinition warning. + */ +#define S3C_UART_OFFSET (0x10000) + +#include <plat/map-s5p.h> + +#define EXYNOS4_PA_SYSRAM 0x02020000 + +#define EXYNOS4_PA_FIMC0 0x11800000 +#define EXYNOS4_PA_FIMC1 0x11810000 +#define EXYNOS4_PA_FIMC2 0x11820000 +#define EXYNOS4_PA_FIMC3 0x11830000 + +#define EXYNOS4_PA_I2S0 0x03830000 +#define EXYNOS4_PA_I2S1 0xE3100000 +#define EXYNOS4_PA_I2S2 0xE2A00000 + +#define EXYNOS4_PA_PCM0 0x03840000 +#define EXYNOS4_PA_PCM1 0x13980000 +#define EXYNOS4_PA_PCM2 0x13990000 + +#define EXYNOS4_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000)) + +#define EXYNOS4_PA_ONENAND 0x0C000000 +#define EXYNOS4_PA_ONENAND_DMA 0x0C600000 + +#define EXYNOS4_PA_CHIPID 0x10000000 + +#define EXYNOS4_PA_SYSCON 0x10010000 +#define EXYNOS4_PA_PMU 0x10020000 +#define EXYNOS4_PA_CMU 0x10030000 + +#define EXYNOS4_PA_SYSTIMER 0x10050000 +#define EXYNOS4_PA_WATCHDOG 0x10060000 +#define EXYNOS4_PA_RTC 0x10070000 + +#define EXYNOS4_PA_KEYPAD 0x100A0000 + +#define EXYNOS4_PA_DMC0 0x10400000 + +#define EXYNOS4_PA_COMBINER 0x10448000 + +#define EXYNOS4_PA_COREPERI 0x10500000 +#define EXYNOS4_PA_GIC_CPU 0x10500100 +#define EXYNOS4_PA_TWD 0x10500600 +#define EXYNOS4_PA_GIC_DIST 0x10501000 +#define EXYNOS4_PA_L2CC 0x10502000 + +#define EXYNOS4_PA_MDMA 0x10810000 +#define EXYNOS4_PA_PDMA0 0x12680000 +#define EXYNOS4_PA_PDMA1 0x12690000 + +#define EXYNOS4_PA_SYSMMU_MDMA 0x10A40000 +#define EXYNOS4_PA_SYSMMU_SSS 0x10A50000 +#define EXYNOS4_PA_SYSMMU_FIMC0 0x11A20000 +#define EXYNOS4_PA_SYSMMU_FIMC1 0x11A30000 +#define EXYNOS4_PA_SYSMMU_FIMC2 0x11A40000 +#define EXYNOS4_PA_SYSMMU_FIMC3 0x11A50000 +#define EXYNOS4_PA_SYSMMU_JPEG 0x11A60000 +#define EXYNOS4_PA_SYSMMU_FIMD0 0x11E20000 +#define EXYNOS4_PA_SYSMMU_FIMD1 0x12220000 +#define EXYNOS4_PA_SYSMMU_PCIe 0x12620000 +#define EXYNOS4_PA_SYSMMU_G2D 0x12A20000 +#define EXYNOS4_PA_SYSMMU_ROTATOR 0x12A30000 +#define EXYNOS4_PA_SYSMMU_MDMA2 0x12A40000 +#define EXYNOS4_PA_SYSMMU_TV 0x12E20000 +#define EXYNOS4_PA_SYSMMU_MFC_L 0x13620000 +#define EXYNOS4_PA_SYSMMU_MFC_R 0x13630000 + +#define EXYNOS4_PA_GPIO1 0x11400000 +#define EXYNOS4_PA_GPIO2 0x11000000 +#define EXYNOS4_PA_GPIO3 0x03860000 + +#define EXYNOS4_PA_MIPI_CSIS0 0x11880000 +#define EXYNOS4_PA_MIPI_CSIS1 0x11890000 + +#define EXYNOS4_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) + +#define EXYNOS4_PA_SATA 0x12560000 +#define EXYNOS4_PA_SATAPHY 0x125D0000 +#define EXYNOS4_PA_SATAPHY_CTRL 0x126B0000 + +#define EXYNOS4_PA_SROMC 0x12570000 + +#define EXYNOS4_PA_UART 0x13800000 + +#define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) + +#define EXYNOS4_PA_AC97 0x139A0000 + +#define EXYNOS4_PA_SPDIF 0x139B0000 + +#define EXYNOS4_PA_TIMER 0x139D0000 + +#define EXYNOS4_PA_SDRAM 0x40000000 + +/* Compatibiltiy Defines */ + +#define S3C_PA_HSMMC0 EXYNOS4_PA_HSMMC(0) +#define S3C_PA_HSMMC1 EXYNOS4_PA_HSMMC(1) +#define S3C_PA_HSMMC2 EXYNOS4_PA_HSMMC(2) +#define S3C_PA_HSMMC3 EXYNOS4_PA_HSMMC(3) +#define S3C_PA_IIC EXYNOS4_PA_IIC(0) +#define S3C_PA_IIC1 EXYNOS4_PA_IIC(1) +#define S3C_PA_IIC2 EXYNOS4_PA_IIC(2) +#define S3C_PA_IIC3 EXYNOS4_PA_IIC(3) +#define S3C_PA_IIC4 EXYNOS4_PA_IIC(4) +#define S3C_PA_IIC5 EXYNOS4_PA_IIC(5) +#define S3C_PA_IIC6 EXYNOS4_PA_IIC(6) +#define S3C_PA_IIC7 EXYNOS4_PA_IIC(7) +#define S3C_PA_RTC EXYNOS4_PA_RTC +#define S3C_PA_WDT EXYNOS4_PA_WATCHDOG + +#define S5P_PA_CHIPID EXYNOS4_PA_CHIPID +#define S5P_PA_FIMC0 EXYNOS4_PA_FIMC0 +#define S5P_PA_FIMC1 EXYNOS4_PA_FIMC1 +#define S5P_PA_FIMC2 EXYNOS4_PA_FIMC2 +#define S5P_PA_FIMC3 EXYNOS4_PA_FIMC3 +#define S5P_PA_MIPI_CSIS0 EXYNOS4_PA_MIPI_CSIS0 +#define S5P_PA_MIPI_CSIS1 EXYNOS4_PA_MIPI_CSIS1 +#define S5P_PA_ONENAND EXYNOS4_PA_ONENAND +#define S5P_PA_ONENAND_DMA EXYNOS4_PA_ONENAND_DMA +#define S5P_PA_SDRAM EXYNOS4_PA_SDRAM +#define S5P_PA_SROMC EXYNOS4_PA_SROMC +#define S5P_PA_SYSCON EXYNOS4_PA_SYSCON +#define S5P_PA_TIMER EXYNOS4_PA_TIMER + +#define SAMSUNG_PA_KEYPAD EXYNOS4_PA_KEYPAD + +/* UART */ + +#define S3C_PA_UART EXYNOS4_PA_UART + +#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) +#define S5P_PA_UART0 S5P_PA_UART(0) +#define S5P_PA_UART1 S5P_PA_UART(1) +#define S5P_PA_UART2 S5P_PA_UART(2) +#define S5P_PA_UART3 S5P_PA_UART(3) +#define S5P_PA_UART4 S5P_PA_UART(4) + +#define S5P_SZ_UART SZ_256 + +#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/memory.h b/arch/arm/mach-exynos4/include/mach/memory.h index 470b01bf861..374ef2cf715 100644 --- a/arch/arm/mach-s5pv310/include/mach/memory.h +++ b/arch/arm/mach-exynos4/include/mach/memory.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/memory.h +/* linux/arch/arm/mach-exynos4/include/mach/memory.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5PV310 - Memory definitions + * EXYNOS4 - Memory definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-exynos4/include/mach/pm-core.h b/arch/arm/mach-exynos4/include/mach/pm-core.h new file mode 100644 index 00000000000..f26e46bc06c --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/pm-core.h @@ -0,0 +1,49 @@ +/* linux/arch/arm/mach-exynos4/include/mach/pm-core.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Based on arch/arm/mach-s3c2410/include/mach/pm-core.h, + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * EXYNOS4210 - PM core support for arch/arm/plat-s5p/pm.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ +#include <mach/regs-pmu.h> + +static inline void s3c_pm_debug_init_uart(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_arch_prepare_irqs(void) +{ + unsigned int tmp; + tmp = __raw_readl(S5P_WAKEUP_MASK); + tmp &= ~(1 << 31); + __raw_writel(tmp, S5P_WAKEUP_MASK); + + __raw_writel(s3c_irqwake_intmask, S5P_WAKEUP_MASK); + __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK); +} + +static inline void s3c_pm_arch_stop_clocks(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_arch_show_resume_irqs(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_arch_update_uart(void __iomem *regs, + struct pm_uart_save *save) +{ + /* nothing here yet */ +} diff --git a/arch/arm/mach-s5pv310/include/mach/pwm-clock.h b/arch/arm/mach-exynos4/include/mach/pwm-clock.h index 7e6da270108..8e12090287b 100644 --- a/arch/arm/mach-s5pv310/include/mach/pwm-clock.h +++ b/arch/arm/mach-exynos4/include/mach/pwm-clock.h @@ -1,7 +1,7 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/pwm-clock.h +/* linux/arch/arm/mach-exynos4/include/mach/pwm-clock.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics @@ -10,7 +10,7 @@ * * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h * - * S5PV310 - pwm clock and timer support + * EXYNOS4 - pwm clock and timer support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5pv310/include/mach/regs-clock.h b/arch/arm/mach-exynos4/include/mach/regs-clock.h index b5c4ada1cff..6e311c1157f 100644 --- a/arch/arm/mach-s5pv310/include/mach/regs-clock.h +++ b/arch/arm/mach-exynos4/include/mach/regs-clock.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/regs-clock.h +/* linux/arch/arm/mach-exynos4/include/mach/regs-clock.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5PV310 - Clock register definitions + * EXYNOS4 - Clock register definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -17,13 +17,13 @@ #define S5P_CLKREG(x) (S5P_VA_CMU + (x)) -#define S5P_INFORM0 S5P_CLKREG(0x800) - #define S5P_CLKDIV_LEFTBUS S5P_CLKREG(0x04500) #define S5P_CLKDIV_STAT_LEFTBUS S5P_CLKREG(0x04600) +#define S5P_CLKGATE_IP_LEFTBUS S5P_CLKREG(0x04800) #define S5P_CLKDIV_RIGHTBUS S5P_CLKREG(0x08500) #define S5P_CLKDIV_STAT_RIGHTBUS S5P_CLKREG(0x08600) +#define S5P_CLKGATE_IP_RIGHTBUS S5P_CLKREG(0x08800) #define S5P_EPLL_CON0 S5P_CLKREG(0x0C110) #define S5P_EPLL_CON1 S5P_CLKREG(0x0C114) @@ -33,18 +33,24 @@ #define S5P_CLKSRC_TOP0 S5P_CLKREG(0x0C210) #define S5P_CLKSRC_TOP1 S5P_CLKREG(0x0C214) #define S5P_CLKSRC_CAM S5P_CLKREG(0x0C220) +#define S5P_CLKSRC_MFC S5P_CLKREG(0x0C228) #define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230) #define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234) #define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238) +#define S5P_CLKSRC_MAUDIO S5P_CLKREG(0x0C23C) #define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240) #define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250) #define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254) #define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510) #define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520) +#define S5P_CLKDIV_TV S5P_CLKREG(0x0C524) +#define S5P_CLKDIV_MFC S5P_CLKREG(0x0C528) +#define S5P_CLKDIV_G3D S5P_CLKREG(0x0C52C) #define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530) #define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534) #define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538) +#define S5P_CLKDIV_MAUDIO S5P_CLKREG(0x0C53C) #define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540) #define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544) #define S5P_CLKDIV_FSYS2 S5P_CLKREG(0x0C548) @@ -58,25 +64,36 @@ #define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310) #define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320) +#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324) #define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334) #define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338) +#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C) #define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340) #define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350) #define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354) #define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610) +#define S5P_CLKGATE_SCLKCAM S5P_CLKREG(0x0C820) #define S5P_CLKGATE_IP_CAM S5P_CLKREG(0x0C920) +#define S5P_CLKGATE_IP_TV S5P_CLKREG(0x0C924) +#define S5P_CLKGATE_IP_MFC S5P_CLKREG(0x0C928) +#define S5P_CLKGATE_IP_G3D S5P_CLKREG(0x0C92C) #define S5P_CLKGATE_IP_IMAGE S5P_CLKREG(0x0C930) #define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934) #define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938) #define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940) +#define S5P_CLKGATE_IP_GPS S5P_CLKREG(0x0C94C) #define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950) #define S5P_CLKGATE_IP_PERIR S5P_CLKREG(0x0C960) +#define S5P_CLKGATE_BLOCK S5P_CLKREG(0x0C970) +#define S5P_CLKSRC_MASK_DMC S5P_CLKREG(0x10300) #define S5P_CLKSRC_DMC S5P_CLKREG(0x10200) #define S5P_CLKDIV_DMC0 S5P_CLKREG(0x10500) +#define S5P_CLKDIV_DMC1 S5P_CLKREG(0x10504) #define S5P_CLKDIV_STAT_DMC0 S5P_CLKREG(0x10600) +#define S5P_CLKGATE_IP_DMC S5P_CLKREG(0x10900) #define S5P_APLL_LOCK S5P_CLKREG(0x14000) #define S5P_MPLL_LOCK S5P_CLKREG(0x14004) @@ -94,21 +111,18 @@ #define S5P_CLKDIV_STATCPU1 S5P_CLKREG(0x14604) #define S5P_CLKGATE_SCLKCPU S5P_CLKREG(0x14800) +#define S5P_CLKGATE_IP_CPU S5P_CLKREG(0x14900) -/* APLL_LOCK */ #define S5P_APLL_LOCKTIME (0x1C20) /* 300us */ -/* APLL_CON0 */ #define S5P_APLLCON0_ENABLE_SHIFT (31) #define S5P_APLLCON0_LOCKED_SHIFT (29) #define S5P_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1) #define S5P_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1) -/* CLK_SRC_CPU */ #define S5P_CLKSRC_CPU_MUXCORE_SHIFT (16) #define S5P_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << S5P_CLKSRC_CPU_MUXCORE_SHIFT) -/* CLKDIV_CPU0 */ #define S5P_CLKDIV_CPU0_CORE_SHIFT (0) #define S5P_CLKDIV_CPU0_CORE_MASK (0x7 << S5P_CLKDIV_CPU0_CORE_SHIFT) #define S5P_CLKDIV_CPU0_COREM0_SHIFT (4) @@ -124,7 +138,6 @@ #define S5P_CLKDIV_CPU0_APLL_SHIFT (24) #define S5P_CLKDIV_CPU0_APLL_MASK (0x7 << S5P_CLKDIV_CPU0_APLL_SHIFT) -/* CLKDIV_DMC0 */ #define S5P_CLKDIV_DMC0_ACP_SHIFT (0) #define S5P_CLKDIV_DMC0_ACP_MASK (0x7 << S5P_CLKDIV_DMC0_ACP_SHIFT) #define S5P_CLKDIV_DMC0_ACPPCLK_SHIFT (4) @@ -142,7 +155,6 @@ #define S5P_CLKDIV_DMC0_CORETI_SHIFT (28) #define S5P_CLKDIV_DMC0_CORETI_MASK (0x7 << S5P_CLKDIV_DMC0_CORETI_SHIFT) -/* CLKDIV_TOP */ #define S5P_CLKDIV_TOP_ACLK200_SHIFT (0) #define S5P_CLKDIV_TOP_ACLK200_MASK (0x7 << S5P_CLKDIV_TOP_ACLK200_SHIFT) #define S5P_CLKDIV_TOP_ACLK100_SHIFT (4) @@ -154,13 +166,14 @@ #define S5P_CLKDIV_TOP_ONENAND_SHIFT (16) #define S5P_CLKDIV_TOP_ONENAND_MASK (0x7 << S5P_CLKDIV_TOP_ONENAND_SHIFT) -/* CLKDIV_LEFTBUS / CLKDIV_RIGHTBUS*/ #define S5P_CLKDIV_BUS_GDLR_SHIFT (0) #define S5P_CLKDIV_BUS_GDLR_MASK (0x7 << S5P_CLKDIV_BUS_GDLR_SHIFT) #define S5P_CLKDIV_BUS_GPLR_SHIFT (4) #define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT) -/* Compatibility defines */ +/* Compatibility defines and inclusion */ + +#include <mach/regs-pmu.h> #define S5P_EPLL_CON S5P_EPLL_CON0 diff --git a/arch/arm/mach-exynos4/include/mach/regs-gpio.h b/arch/arm/mach-exynos4/include/mach/regs-gpio.h new file mode 100644 index 00000000000..1401b21663a --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/regs-gpio.h @@ -0,0 +1,42 @@ +/* linux/arch/arm/mach-exynos4/include/mach/regs-gpio.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - GPIO (including EINT) register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_GPIO_H +#define __ASM_ARCH_REGS_GPIO_H __FILE__ + +#include <mach/map.h> +#include <mach/irqs.h> + +#define EXYNOS4_EINT40CON (S5P_VA_GPIO2 + 0xE00) +#define S5P_EINT_CON(x) (EXYNOS4_EINT40CON + ((x) * 0x4)) + +#define EXYNOS4_EINT40FLTCON0 (S5P_VA_GPIO2 + 0xE80) +#define S5P_EINT_FLTCON(x) (EXYNOS4_EINT40FLTCON0 + ((x) * 0x4)) + +#define EXYNOS4_EINT40MASK (S5P_VA_GPIO2 + 0xF00) +#define S5P_EINT_MASK(x) (EXYNOS4_EINT40MASK + ((x) * 0x4)) + +#define EXYNOS4_EINT40PEND (S5P_VA_GPIO2 + 0xF40) +#define S5P_EINT_PEND(x) (EXYNOS4_EINT40PEND + ((x) * 0x4)) + +#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) + +#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) + +#define EINT_MODE S3C_GPIO_SFN(0xf) + +#define EINT_GPIO_0(x) EXYNOS4_GPX0(x) +#define EINT_GPIO_1(x) EXYNOS4_GPX1(x) +#define EINT_GPIO_2(x) EXYNOS4_GPX2(x) +#define EINT_GPIO_3(x) EXYNOS4_GPX3(x) + +#endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-irq.h b/arch/arm/mach-exynos4/include/mach/regs-irq.h index c6e09c7f916..9c7b4bfd546 100644 --- a/arch/arm/mach-s5pv310/include/mach/regs-irq.h +++ b/arch/arm/mach-exynos4/include/mach/regs-irq.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/regs-irq.h +/* linux/arch/arm/mach-exynos4/include/mach/regs-irq.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5PV310 - IRQ register definitions + * EXYNOS4 - IRQ register definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-exynos4/include/mach/regs-mct.h b/arch/arm/mach-exynos4/include/mach/regs-mct.h new file mode 100644 index 00000000000..ca9c8434b02 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/regs-mct.h @@ -0,0 +1,52 @@ +/* arch/arm/mach-exynos4/include/mach/regs-mct.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 MCT configutation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_MCT_H +#define __ASM_ARCH_REGS_MCT_H __FILE__ + +#include <mach/map.h> + +#define EXYNOS4_MCTREG(x) (S5P_VA_SYSTIMER + (x)) + +#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100) +#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104) +#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110) + +#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200) +#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204) +#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208) + +#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240) + +#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244) +#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248) +#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C) + +#define EXYNOS4_MCT_L0_BASE EXYNOS4_MCTREG(0x300) +#define EXYNOS4_MCT_L1_BASE EXYNOS4_MCTREG(0x400) + +#define MCT_L_TCNTB_OFFSET (0x00) +#define MCT_L_ICNTB_OFFSET (0x08) +#define MCT_L_TCON_OFFSET (0x20) +#define MCT_L_INT_CSTAT_OFFSET (0x30) +#define MCT_L_INT_ENB_OFFSET (0x34) +#define MCT_L_WSTAT_OFFSET (0x40) + +#define MCT_G_TCON_START (1 << 8) +#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1) +#define MCT_G_TCON_COMP0_ENABLE (1 << 0) + +#define MCT_L_TCON_INTERVAL_MODE (1 << 2) +#define MCT_L_TCON_INT_START (1 << 1) +#define MCT_L_TCON_TIMER_START (1 << 0) + +#endif /* __ASM_ARCH_REGS_MCT_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-mem.h b/arch/arm/mach-exynos4/include/mach/regs-mem.h index 834227140ea..0368b5a2725 100644 --- a/arch/arm/mach-s5pv310/include/mach/regs-mem.h +++ b/arch/arm/mach-exynos4/include/mach/regs-mem.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/regs-mem.h +/* linux/arch/arm/mach-exynos4/include/mach/regs-mem.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * S5PV310 - SROMC and DMC register definitions + * EXYNOS4 - SROMC and DMC register definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-exynos4/include/mach/regs-pmu.h b/arch/arm/mach-exynos4/include/mach/regs-pmu.h new file mode 100644 index 00000000000..62b0014d05e --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/regs-pmu.h @@ -0,0 +1,162 @@ +/* linux/arch/arm/mach-exynos4/include/mach/regs-pmu.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - Power management unit definition + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_PMU_H +#define __ASM_ARCH_REGS_PMU_H __FILE__ + +#include <mach/map.h> + +#define S5P_PMUREG(x) (S5P_VA_PMU + (x)) + +#define S5P_CENTRAL_SEQ_CONFIGURATION S5P_PMUREG(0x0200) + +#define S5P_CENTRAL_LOWPWR_CFG (1 << 16) + +#define S5P_CENTRAL_SEQ_OPTION S5P_PMUREG(0x0208) + +#define S5P_USE_STANDBY_WFI0 (1 << 16) +#define S5P_USE_STANDBY_WFI1 (1 << 17) +#define S5P_USE_STANDBY_WFE0 (1 << 24) +#define S5P_USE_STANDBY_WFE1 (1 << 25) +#define S5P_USE_MASK ((0x3 << 16) | (0x3 << 24)) + +#define S5P_WAKEUP_STAT S5P_PMUREG(0x0600) +#define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604) +#define S5P_WAKEUP_MASK S5P_PMUREG(0x0608) + +#define S5P_MIPI_DPHY_CONTROL(n) S5P_PMUREG(0x0710 + (n) * 4) +#define S5P_MIPI_DPHY_ENABLE (1 << 0) +#define S5P_MIPI_DPHY_SRESETN (1 << 1) +#define S5P_MIPI_DPHY_MRESETN (1 << 2) + +#define S5P_PMU_SATA_PHY_CONTROL S5P_PMUREG(0x0720) +#define S5P_INFORM0 S5P_PMUREG(0x0800) +#define S5P_INFORM1 S5P_PMUREG(0x0804) +#define S5P_INFORM2 S5P_PMUREG(0x0808) +#define S5P_INFORM3 S5P_PMUREG(0x080C) +#define S5P_INFORM4 S5P_PMUREG(0x0810) +#define S5P_INFORM5 S5P_PMUREG(0x0814) +#define S5P_INFORM6 S5P_PMUREG(0x0818) +#define S5P_INFORM7 S5P_PMUREG(0x081C) + +#define S5P_ARM_CORE0_LOWPWR S5P_PMUREG(0x1000) +#define S5P_DIS_IRQ_CORE0 S5P_PMUREG(0x1004) +#define S5P_DIS_IRQ_CENTRAL0 S5P_PMUREG(0x1008) +#define S5P_ARM_CORE1_LOWPWR S5P_PMUREG(0x1010) +#define S5P_DIS_IRQ_CORE1 S5P_PMUREG(0x1014) +#define S5P_DIS_IRQ_CENTRAL1 S5P_PMUREG(0x1018) +#define S5P_ARM_COMMON_LOWPWR S5P_PMUREG(0x1080) +#define S5P_L2_0_LOWPWR S5P_PMUREG(0x10C0) +#define S5P_L2_1_LOWPWR S5P_PMUREG(0x10C4) +#define S5P_CMU_ACLKSTOP_LOWPWR S5P_PMUREG(0x1100) +#define S5P_CMU_SCLKSTOP_LOWPWR S5P_PMUREG(0x1104) +#define S5P_CMU_RESET_LOWPWR S5P_PMUREG(0x110C) +#define S5P_APLL_SYSCLK_LOWPWR S5P_PMUREG(0x1120) +#define S5P_MPLL_SYSCLK_LOWPWR S5P_PMUREG(0x1124) +#define S5P_VPLL_SYSCLK_LOWPWR S5P_PMUREG(0x1128) +#define S5P_EPLL_SYSCLK_LOWPWR S5P_PMUREG(0x112C) +#define S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR S5P_PMUREG(0x1138) +#define S5P_CMU_RESET_GPSALIVE_LOWPWR S5P_PMUREG(0x113C) +#define S5P_CMU_CLKSTOP_CAM_LOWPWR S5P_PMUREG(0x1140) +#define S5P_CMU_CLKSTOP_TV_LOWPWR S5P_PMUREG(0x1144) +#define S5P_CMU_CLKSTOP_MFC_LOWPWR S5P_PMUREG(0x1148) +#define S5P_CMU_CLKSTOP_G3D_LOWPWR S5P_PMUREG(0x114C) +#define S5P_CMU_CLKSTOP_LCD0_LOWPWR S5P_PMUREG(0x1150) +#define S5P_CMU_CLKSTOP_LCD1_LOWPWR S5P_PMUREG(0x1154) +#define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR S5P_PMUREG(0x1158) +#define S5P_CMU_CLKSTOP_GPS_LOWPWR S5P_PMUREG(0x115C) +#define S5P_CMU_RESET_CAM_LOWPWR S5P_PMUREG(0x1160) +#define S5P_CMU_RESET_TV_LOWPWR S5P_PMUREG(0x1164) +#define S5P_CMU_RESET_MFC_LOWPWR S5P_PMUREG(0x1168) +#define S5P_CMU_RESET_G3D_LOWPWR S5P_PMUREG(0x116C) +#define S5P_CMU_RESET_LCD0_LOWPWR S5P_PMUREG(0x1170) +#define S5P_CMU_RESET_LCD1_LOWPWR S5P_PMUREG(0x1174) +#define S5P_CMU_RESET_MAUDIO_LOWPWR S5P_PMUREG(0x1178) +#define S5P_CMU_RESET_GPS_LOWPWR S5P_PMUREG(0x117C) +#define S5P_TOP_BUS_LOWPWR S5P_PMUREG(0x1180) +#define S5P_TOP_RETENTION_LOWPWR S5P_PMUREG(0x1184) +#define S5P_TOP_PWR_LOWPWR S5P_PMUREG(0x1188) +#define S5P_LOGIC_RESET_LOWPWR S5P_PMUREG(0x11A0) +#define S5P_ONENAND_MEM_LOWPWR S5P_PMUREG(0x11C0) +#define S5P_MODIMIF_MEM_LOWPWR S5P_PMUREG(0x11C4) +#define S5P_G2D_ACP_MEM_LOWPWR S5P_PMUREG(0x11C8) +#define S5P_USBOTG_MEM_LOWPWR S5P_PMUREG(0x11CC) +#define S5P_HSMMC_MEM_LOWPWR S5P_PMUREG(0x11D0) +#define S5P_CSSYS_MEM_LOWPWR S5P_PMUREG(0x11D4) +#define S5P_SECSS_MEM_LOWPWR S5P_PMUREG(0x11D8) +#define S5P_PCIE_MEM_LOWPWR S5P_PMUREG(0x11E0) +#define S5P_SATA_MEM_LOWPWR S5P_PMUREG(0x11E4) +#define S5P_PAD_RETENTION_DRAM_LOWPWR S5P_PMUREG(0x1200) +#define S5P_PAD_RETENTION_MAUDIO_LOWPWR S5P_PMUREG(0x1204) +#define S5P_PAD_RETENTION_GPIO_LOWPWR S5P_PMUREG(0x1220) +#define S5P_PAD_RETENTION_UART_LOWPWR S5P_PMUREG(0x1224) +#define S5P_PAD_RETENTION_MMCA_LOWPWR S5P_PMUREG(0x1228) +#define S5P_PAD_RETENTION_MMCB_LOWPWR S5P_PMUREG(0x122C) +#define S5P_PAD_RETENTION_EBIA_LOWPWR S5P_PMUREG(0x1230) +#define S5P_PAD_RETENTION_EBIB_LOWPWR S5P_PMUREG(0x1234) +#define S5P_PAD_RETENTION_ISOLATION_LOWPWR S5P_PMUREG(0x1240) +#define S5P_PAD_RETENTION_ALV_SEL_LOWPWR S5P_PMUREG(0x1260) +#define S5P_XUSBXTI_LOWPWR S5P_PMUREG(0x1280) +#define S5P_XXTI_LOWPWR S5P_PMUREG(0x1284) +#define S5P_EXT_REGULATOR_LOWPWR S5P_PMUREG(0x12C0) +#define S5P_GPIO_MODE_LOWPWR S5P_PMUREG(0x1300) +#define S5P_GPIO_MODE_MAUDIO_LOWPWR S5P_PMUREG(0x1340) +#define S5P_CAM_LOWPWR S5P_PMUREG(0x1380) +#define S5P_TV_LOWPWR S5P_PMUREG(0x1384) +#define S5P_MFC_LOWPWR S5P_PMUREG(0x1388) +#define S5P_G3D_LOWPWR S5P_PMUREG(0x138C) +#define S5P_LCD0_LOWPWR S5P_PMUREG(0x1390) +#define S5P_LCD1_LOWPWR S5P_PMUREG(0x1394) +#define S5P_MAUDIO_LOWPWR S5P_PMUREG(0x1398) +#define S5P_GPS_LOWPWR S5P_PMUREG(0x139C) +#define S5P_GPS_ALIVE_LOWPWR S5P_PMUREG(0x13A0) + +#define S5P_ARM_CORE0_CONFIGURATION S5P_PMUREG(0x2000) +#define S5P_ARM_CORE0_OPTION S5P_PMUREG(0x2008) +#define S5P_ARM_CORE1_CONFIGURATION S5P_PMUREG(0x2080) +#define S5P_ARM_CORE1_STATUS S5P_PMUREG(0x2084) +#define S5P_ARM_CORE1_OPTION S5P_PMUREG(0x2088) + +#define S5P_ARM_COMMON_OPTION S5P_PMUREG(0x2408) +#define S5P_TOP_PWR_OPTION S5P_PMUREG(0x2C48) +#define S5P_CAM_OPTION S5P_PMUREG(0x3C08) +#define S5P_TV_OPTION S5P_PMUREG(0x3C28) +#define S5P_MFC_OPTION S5P_PMUREG(0x3C48) +#define S5P_G3D_OPTION S5P_PMUREG(0x3C68) +#define S5P_LCD0_OPTION S5P_PMUREG(0x3C88) +#define S5P_LCD1_OPTION S5P_PMUREG(0x3CA8) +#define S5P_MAUDIO_OPTION S5P_PMUREG(0x3CC8) +#define S5P_GPS_OPTION S5P_PMUREG(0x3CE8) +#define S5P_GPS_ALIVE_OPTION S5P_PMUREG(0x3D08) + +#define S5P_PAD_RET_MAUDIO_OPTION S5P_PMUREG(0x3028) +#define S5P_PAD_RET_GPIO_OPTION S5P_PMUREG(0x3108) +#define S5P_PAD_RET_UART_OPTION S5P_PMUREG(0x3128) +#define S5P_PAD_RET_MMCA_OPTION S5P_PMUREG(0x3148) +#define S5P_PAD_RET_MMCB_OPTION S5P_PMUREG(0x3168) +#define S5P_PAD_RET_EBIA_OPTION S5P_PMUREG(0x3188) +#define S5P_PAD_RET_EBIB_OPTION S5P_PMUREG(0x31A8) + +#define S5P_PMU_CAM_CONF S5P_PMUREG(0x3C00) +#define S5P_PMU_TV_CONF S5P_PMUREG(0x3C20) +#define S5P_PMU_MFC_CONF S5P_PMUREG(0x3C40) +#define S5P_PMU_G3D_CONF S5P_PMUREG(0x3C60) +#define S5P_PMU_LCD0_CONF S5P_PMUREG(0x3C80) +#define S5P_PMU_LCD1_CONF S5P_PMUREG(0x3CA0) +#define S5P_PMU_GPS_CONF S5P_PMUREG(0x3CE0) + +#define S5P_PMU_SATA_PHY_CONTROL_EN 0x1 +#define S5P_INT_LOCAL_PWR_EN 0x7 + +#define S5P_CHECK_SLEEP 0x00000BAD + +#endif /* __ASM_ARCH_REGS_PMU_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-sysmmu.h b/arch/arm/mach-exynos4/include/mach/regs-sysmmu.h index 0b28e81a16f..68ff6ad08a2 100644 --- a/arch/arm/mach-s5pv310/include/mach/regs-sysmmu.h +++ b/arch/arm/mach-exynos4/include/mach/regs-sysmmu.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/regs-sysmmu.h +/* linux/arch/arm/mach-exynos4/include/mach/regs-sysmmu.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * S5PV310 - System MMU register + * EXYNOS4 - System MMU register * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -19,6 +19,10 @@ #define S5P_MMU_FLUSH 0x00C #define S5P_PT_BASE_ADDR 0x014 #define S5P_INT_STATUS 0x018 +#define S5P_INT_CLEAR 0x01C #define S5P_PAGE_FAULT_ADDR 0x024 +#define S5P_AW_FAULT_ADDR 0x028 +#define S5P_AR_FAULT_ADDR 0x02C +#define S5P_DEFAULT_SLAVE_ADDR 0x030 #endif /* __ASM_ARCH_REGS_SYSMMU_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/smp.h b/arch/arm/mach-exynos4/include/mach/smp.h index 393ccbd52c4..a463dcebcfd 100644 --- a/arch/arm/mach-s5pv310/include/mach/smp.h +++ b/arch/arm/mach-exynos4/include/mach/smp.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/smp.h +/* linux/arch/arm/mach-exynos4/include/mach/smp.h * * Cloned from arch/arm/mach-realview/include/mach/smp.h */ diff --git a/arch/arm/mach-exynos4/include/mach/sysmmu.h b/arch/arm/mach-exynos4/include/mach/sysmmu.h new file mode 100644 index 00000000000..6a5fbb534e8 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/sysmmu.h @@ -0,0 +1,46 @@ +/* linux/arch/arm/mach-exynos4/include/mach/sysmmu.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung sysmmu driver for EXYNOS4 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARM_ARCH_SYSMMU_H +#define __ASM_ARM_ARCH_SYSMMU_H __FILE__ + +enum exynos4_sysmmu_ips { + SYSMMU_MDMA, + SYSMMU_SSS, + SYSMMU_FIMC0, + SYSMMU_FIMC1, + SYSMMU_FIMC2, + SYSMMU_FIMC3, + SYSMMU_JPEG, + SYSMMU_FIMD0, + SYSMMU_FIMD1, + SYSMMU_PCIe, + SYSMMU_G2D, + SYSMMU_ROTATOR, + SYSMMU_MDMA2, + SYSMMU_TV, + SYSMMU_MFC_L, + SYSMMU_MFC_R, + EXYNOS4_SYSMMU_TOTAL_IPNUM, +}; + +#define S5P_SYSMMU_TOTAL_IPNUM EXYNOS4_SYSMMU_TOTAL_IPNUM + +extern const char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM]; + +typedef enum exynos4_sysmmu_ips sysmmu_ips; + +void sysmmu_clk_init(struct device *dev, sysmmu_ips ips); +void sysmmu_clk_enable(sysmmu_ips ips); +void sysmmu_clk_disable(sysmmu_ips ips); + +#endif /* __ASM_ARM_ARCH_SYSMMU_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/system.h b/arch/arm/mach-exynos4/include/mach/system.h index d10c009cf0f..5e3220c18fc 100644 --- a/arch/arm/mach-s5pv310/include/mach/system.h +++ b/arch/arm/mach-exynos4/include/mach/system.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/system.h +/* linux/arch/arm/mach-exynos4/include/mach/system.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5PV310 - system support header + * EXYNOS4 - system support header * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5pv310/include/mach/timex.h b/arch/arm/mach-exynos4/include/mach/timex.h index bd2359b952b..6d138750a70 100644 --- a/arch/arm/mach-s5pv310/include/mach/timex.h +++ b/arch/arm/mach-exynos4/include/mach/timex.h @@ -1,14 +1,14 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/timex.h +/* linux/arch/arm/mach-exynos4/include/mach/timex.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright (c) 2003-2010 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * Based on arch/arm/mach-s5p6442/include/mach/timex.h * - * S5PV310 - time parameters + * EXYNOS4 - time parameters * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5pv310/include/mach/uncompress.h b/arch/arm/mach-exynos4/include/mach/uncompress.h index 59593c1e241..21d97bcd9ac 100644 --- a/arch/arm/mach-s5pv310/include/mach/uncompress.h +++ b/arch/arm/mach-exynos4/include/mach/uncompress.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/uncompress.h +/* linux/arch/arm/mach-exynos4/include/mach/uncompress.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5PV310 - uncompress code + * EXYNOS4 - uncompress code * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5pv310/include/mach/vmalloc.h b/arch/arm/mach-exynos4/include/mach/vmalloc.h index 65759fb9758..284330e571d 100644 --- a/arch/arm/mach-s5pv310/include/mach/vmalloc.h +++ b/arch/arm/mach-exynos4/include/mach/vmalloc.h @@ -1,7 +1,7 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/vmalloc.h +/* linux/arch/arm/mach-exynos4/include/mach/vmalloc.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright 2010 Ben Dooks <ben-linux@fluff.org> * @@ -11,7 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * S5PV310 vmalloc definition + * EXYNOS4 vmalloc definition */ #ifndef __ASM_ARCH_VMALLOC_H diff --git a/arch/arm/mach-s5pv310/init.c b/arch/arm/mach-exynos4/init.c index 182dcf42cfb..cf91f50e43a 100644 --- a/arch/arm/mach-s5pv310/init.c +++ b/arch/arm/mach-exynos4/init.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s5pv310/init.c +/* linux/arch/arm/mach-exynos4/init.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ @@ -14,7 +14,7 @@ #include <plat/devs.h> #include <plat/regs-serial.h> -static struct s3c24xx_uart_clksrc s5pv310_serial_clocks[] = { +static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = { [0] = { .name = "uclk1", .divisor = 1, @@ -24,7 +24,7 @@ static struct s3c24xx_uart_clksrc s5pv310_serial_clocks[] = { }; /* uart registration process */ -void __init s5pv310_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) +void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) { struct s3c2410_uartcfg *tcfg = cfg; u32 ucnt; @@ -32,8 +32,8 @@ void __init s5pv310_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { if (!tcfg->clocks) { tcfg->has_fracval = 1; - tcfg->clocks = s5pv310_serial_clocks; - tcfg->clocks_size = ARRAY_SIZE(s5pv310_serial_clocks); + tcfg->clocks = exynos4_serial_clocks; + tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks); } } diff --git a/arch/arm/mach-s5pv310/irq-combiner.c b/arch/arm/mach-exynos4/irq-combiner.c index 1ea4a9e83bb..31618d91ce1 100644 --- a/arch/arm/mach-s5pv310/irq-combiner.c +++ b/arch/arm/mach-exynos4/irq-combiner.c @@ -1,6 +1,6 @@ -/* linux/arch/arm/mach-s5pv310/irq-combiner.c +/* linux/arch/arm/mach-exynos4/irq-combiner.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * * Based on arch/arm/common/gic.c diff --git a/arch/arm/mach-s5pv310/irq-eint.c b/arch/arm/mach-exynos4/irq-eint.c index 477bd9e97f0..4f7ad4a796e 100644 --- a/arch/arm/mach-s5pv310/irq-eint.c +++ b/arch/arm/mach-exynos4/irq-eint.c @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/irq-eint.c +/* linux/arch/arm/mach-exynos4/irq-eint.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * S5PV310 - IRQ EINT support + * EXYNOS4 - IRQ EINT support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -27,7 +27,7 @@ static DEFINE_SPINLOCK(eint_lock); static unsigned int eint0_15_data[16]; -static unsigned int s5pv310_get_irq_nr(unsigned int number) +static unsigned int exynos4_get_irq_nr(unsigned int number) { u32 ret = 0; @@ -48,7 +48,7 @@ static unsigned int s5pv310_get_irq_nr(unsigned int number) return ret; } -static inline void s5pv310_irq_eint_mask(struct irq_data *data) +static inline void exynos4_irq_eint_mask(struct irq_data *data) { u32 mask; @@ -59,7 +59,7 @@ static inline void s5pv310_irq_eint_mask(struct irq_data *data) spin_unlock(&eint_lock); } -static void s5pv310_irq_eint_unmask(struct irq_data *data) +static void exynos4_irq_eint_unmask(struct irq_data *data) { u32 mask; @@ -70,19 +70,19 @@ static void s5pv310_irq_eint_unmask(struct irq_data *data) spin_unlock(&eint_lock); } -static inline void s5pv310_irq_eint_ack(struct irq_data *data) +static inline void exynos4_irq_eint_ack(struct irq_data *data) { __raw_writel(eint_irq_to_bit(data->irq), S5P_EINT_PEND(EINT_REG_NR(data->irq))); } -static void s5pv310_irq_eint_maskack(struct irq_data *data) +static void exynos4_irq_eint_maskack(struct irq_data *data) { - s5pv310_irq_eint_mask(data); - s5pv310_irq_eint_ack(data); + exynos4_irq_eint_mask(data); + exynos4_irq_eint_ack(data); } -static int s5pv310_irq_eint_set_type(struct irq_data *data, unsigned int type) +static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type) { int offs = EINT_OFFSET(data->irq); int shift; @@ -145,19 +145,19 @@ static int s5pv310_irq_eint_set_type(struct irq_data *data, unsigned int type) return 0; } -static struct irq_chip s5pv310_irq_eint = { - .name = "s5pv310-eint", - .irq_mask = s5pv310_irq_eint_mask, - .irq_unmask = s5pv310_irq_eint_unmask, - .irq_mask_ack = s5pv310_irq_eint_maskack, - .irq_ack = s5pv310_irq_eint_ack, - .irq_set_type = s5pv310_irq_eint_set_type, +static struct irq_chip exynos4_irq_eint = { + .name = "exynos4-eint", + .irq_mask = exynos4_irq_eint_mask, + .irq_unmask = exynos4_irq_eint_unmask, + .irq_mask_ack = exynos4_irq_eint_maskack, + .irq_ack = exynos4_irq_eint_ack, + .irq_set_type = exynos4_irq_eint_set_type, #ifdef CONFIG_PM .irq_set_wake = s3c_irqext_wake, #endif }; -/* s5pv310_irq_demux_eint +/* exynos4_irq_demux_eint * * This function demuxes the IRQ from from EINTs 16 to 31. * It is designed to be inlined into the specific handler @@ -165,7 +165,7 @@ static struct irq_chip s5pv310_irq_eint = { * * Each EINT pend/mask registers handle eight of them. */ -static inline void s5pv310_irq_demux_eint(unsigned int start) +static inline void exynos4_irq_demux_eint(unsigned int start) { unsigned int irq; @@ -182,13 +182,13 @@ static inline void s5pv310_irq_demux_eint(unsigned int start) } } -static void s5pv310_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) +static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) { - s5pv310_irq_demux_eint(IRQ_EINT(16)); - s5pv310_irq_demux_eint(IRQ_EINT(24)); + exynos4_irq_demux_eint(IRQ_EINT(16)); + exynos4_irq_demux_eint(IRQ_EINT(24)); } -static void s5pv310_irq_eint0_15(unsigned int irq, struct irq_desc *desc) +static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) { u32 *irq_data = get_irq_data(irq); struct irq_chip *chip = get_irq_chip(irq); @@ -203,27 +203,27 @@ static void s5pv310_irq_eint0_15(unsigned int irq, struct irq_desc *desc) chip->irq_unmask(&desc->irq_data); } -int __init s5pv310_init_irq_eint(void) +int __init exynos4_init_irq_eint(void) { int irq; for (irq = 0 ; irq <= 31 ; irq++) { - set_irq_chip(IRQ_EINT(irq), &s5pv310_irq_eint); + set_irq_chip(IRQ_EINT(irq), &exynos4_irq_eint); set_irq_handler(IRQ_EINT(irq), handle_level_irq); set_irq_flags(IRQ_EINT(irq), IRQF_VALID); } - set_irq_chained_handler(IRQ_EINT16_31, s5pv310_irq_demux_eint16_31); + set_irq_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31); for (irq = 0 ; irq <= 15 ; irq++) { eint0_15_data[irq] = IRQ_EINT(irq); - set_irq_data(s5pv310_get_irq_nr(irq), &eint0_15_data[irq]); - set_irq_chained_handler(s5pv310_get_irq_nr(irq), - s5pv310_irq_eint0_15); + set_irq_data(exynos4_get_irq_nr(irq), &eint0_15_data[irq]); + set_irq_chained_handler(exynos4_get_irq_nr(irq), + exynos4_irq_eint0_15); } return 0; } -arch_initcall(s5pv310_init_irq_eint); +arch_initcall(exynos4_init_irq_eint); diff --git a/arch/arm/mach-s5pv310/localtimer.c b/arch/arm/mach-exynos4/localtimer.c index 2784036cd8b..2a2993ae8d8 100644 --- a/arch/arm/mach-s5pv310/localtimer.c +++ b/arch/arm/mach-exynos4/localtimer.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s5pv310/localtimer.c +/* linux/arch/arm/mach-exynos4/localtimer.c * * Cloned from linux/arch/arm/mach-realview/localtimer.c * diff --git a/arch/arm/mach-exynos4/mach-armlex4210.c b/arch/arm/mach-exynos4/mach-armlex4210.c new file mode 100644 index 00000000000..b482c6285fc --- /dev/null +++ b/arch/arm/mach-exynos4/mach-armlex4210.c @@ -0,0 +1,215 @@ +/* linux/arch/arm/mach-exynos4/mach-armlex4210.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/gpio.h> +#include <linux/io.h> +#include <linux/mmc/host.h> +#include <linux/platform_device.h> +#include <linux/serial_core.h> +#include <linux/smsc911x.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/exynos4.h> +#include <plat/gpio-cfg.h> +#include <plat/regs-serial.h> +#include <plat/regs-srom.h> +#include <plat/sdhci.h> + +#include <mach/map.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define ARMLEX4210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define ARMLEX4210_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define ARMLEX4210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg armlex4210_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = ARMLEX4210_UCON_DEFAULT, + .ulcon = ARMLEX4210_ULCON_DEFAULT, + .ufcon = ARMLEX4210_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = ARMLEX4210_UCON_DEFAULT, + .ulcon = ARMLEX4210_ULCON_DEFAULT, + .ufcon = ARMLEX4210_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = ARMLEX4210_UCON_DEFAULT, + .ulcon = ARMLEX4210_ULCON_DEFAULT, + .ufcon = ARMLEX4210_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = ARMLEX4210_UCON_DEFAULT, + .ulcon = ARMLEX4210_ULCON_DEFAULT, + .ufcon = ARMLEX4210_UFCON_DEFAULT, + }, +}; + +static struct s3c_sdhci_platdata armlex4210_hsmmc0_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_PERMANENT, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA, +#endif +}; + +static struct s3c_sdhci_platdata armlex4210_hsmmc2_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = EXYNOS4_GPX2(5), + .ext_cd_gpio_invert = 1, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, + .max_width = 4, +}; + +static struct s3c_sdhci_platdata armlex4210_hsmmc3_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_PERMANENT, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, + .max_width = 4, +}; + +static void __init armlex4210_sdhci_init(void) +{ + s3c_sdhci0_set_platdata(&armlex4210_hsmmc0_pdata); + s3c_sdhci2_set_platdata(&armlex4210_hsmmc2_pdata); + s3c_sdhci3_set_platdata(&armlex4210_hsmmc3_pdata); +} + +static void __init armlex4210_wlan_init(void) +{ + /* enable */ + s3c_gpio_cfgpin(EXYNOS4_GPX2(0), S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(EXYNOS4_GPX2(0), S3C_GPIO_PULL_UP); + + /* reset */ + s3c_gpio_cfgpin(EXYNOS4_GPX1(6), S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(EXYNOS4_GPX1(6), S3C_GPIO_PULL_UP); + + /* wakeup */ + s3c_gpio_cfgpin(EXYNOS4_GPX1(5), S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(EXYNOS4_GPX1(5), S3C_GPIO_PULL_UP); +} + +static struct resource armlex4210_smsc911x_resources[] = { + [0] = { + .start = EXYNOS4_PA_SROM_BANK(3), + .end = EXYNOS4_PA_SROM_BANK(3) + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_EINT(27), + .end = IRQ_EINT(27), + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, + }, +}; + +static struct smsc911x_platform_config smsc9215_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, + .phy_interface = PHY_INTERFACE_MODE_MII, + .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67}, +}; + +static struct platform_device armlex4210_smsc911x = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(armlex4210_smsc911x_resources), + .resource = armlex4210_smsc911x_resources, + .dev = { + .platform_data = &smsc9215_config, + }, +}; + +static struct platform_device *armlex4210_devices[] __initdata = { + &s3c_device_hsmmc0, + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, + &s3c_device_rtc, + &s3c_device_wdt, + &exynos4_device_sysmmu, + &samsung_asoc_dma, + &armlex4210_smsc911x, + &exynos4_device_ahci, +}; + +static void __init armlex4210_smsc911x_init(void) +{ + u32 cs1; + + /* configure nCS1 width to 16 bits */ + cs1 = __raw_readl(S5P_SROM_BW) & + ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT); + cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) | + (0 << S5P_SROM_BW__WAITENABLE__SHIFT) | + (1 << S5P_SROM_BW__ADDRMODE__SHIFT) | + (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) << + S5P_SROM_BW__NCS1__SHIFT; + __raw_writel(cs1, S5P_SROM_BW); + + /* set timing for nCS1 suitable for ethernet chip */ + __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) | + (0x9 << S5P_SROM_BCX__TACP__SHIFT) | + (0xc << S5P_SROM_BCX__TCAH__SHIFT) | + (0x1 << S5P_SROM_BCX__TCOH__SHIFT) | + (0x6 << S5P_SROM_BCX__TACC__SHIFT) | + (0x1 << S5P_SROM_BCX__TCOS__SHIFT) | + (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1); +} + +static void __init armlex4210_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(armlex4210_uartcfgs, + ARRAY_SIZE(armlex4210_uartcfgs)); +} + +static void __init armlex4210_machine_init(void) +{ + armlex4210_smsc911x_init(); + + armlex4210_sdhci_init(); + + armlex4210_wlan_init(); + + platform_add_devices(armlex4210_devices, + ARRAY_SIZE(armlex4210_devices)); +} + +MACHINE_START(ARMLEX4210, "ARMLEX4210") + /* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */ + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = exynos4_init_irq, + .map_io = armlex4210_map_io, + .init_machine = armlex4210_machine_init, + .timer = &exynos4_timer, +MACHINE_END diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c new file mode 100644 index 00000000000..b79ad010d19 --- /dev/null +++ b/arch/arm/mach-exynos4/mach-nuri.c @@ -0,0 +1,305 @@ +/* + * linux/arch/arm/mach-exynos4/mach-nuri.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/serial_core.h> +#include <linux/input.h> +#include <linux/i2c.h> +#include <linux/gpio_keys.h> +#include <linux/gpio.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/mmc/host.h> +#include <linux/fb.h> +#include <linux/pwm_backlight.h> + +#include <video/platform_lcd.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <plat/regs-serial.h> +#include <plat/exynos4.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/sdhci.h> + +#include <mach/map.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define NURI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define NURI_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define NURI_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG256 | \ + S5PV210_UFCON_RXTRIG256) + +enum fixed_regulator_id { + FIXED_REG_ID_MMC = 0, +}; + +static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = { + { + .hwport = 0, + .ucon = NURI_UCON_DEFAULT, + .ulcon = NURI_ULCON_DEFAULT, + .ufcon = NURI_UFCON_DEFAULT, + }, + { + .hwport = 1, + .ucon = NURI_UCON_DEFAULT, + .ulcon = NURI_ULCON_DEFAULT, + .ufcon = NURI_UFCON_DEFAULT, + }, + { + .hwport = 2, + .ucon = NURI_UCON_DEFAULT, + .ulcon = NURI_ULCON_DEFAULT, + .ufcon = NURI_UFCON_DEFAULT, + }, + { + .hwport = 3, + .ucon = NURI_UCON_DEFAULT, + .ulcon = NURI_ULCON_DEFAULT, + .ufcon = NURI_UFCON_DEFAULT, + }, +}; + +/* eMMC */ +static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = { + .max_width = 8, + .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | + MMC_CAP_DISABLE | MMC_CAP_ERASE), + .cd_type = S3C_SDHCI_CD_PERMANENT, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static struct regulator_consumer_supply emmc_supplies[] = { + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), + REGULATOR_SUPPLY("vmmc", "dw_mmc"), +}; + +static struct regulator_init_data emmc_fixed_voltage_init_data = { + .constraints = { + .name = "VMEM_VDD_2.8V", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(emmc_supplies), + .consumer_supplies = emmc_supplies, +}; + +static struct fixed_voltage_config emmc_fixed_voltage_config = { + .supply_name = "MASSMEMORY_EN (inverted)", + .microvolts = 2800000, + .gpio = EXYNOS4_GPL1(1), + .enable_high = false, + .init_data = &emmc_fixed_voltage_init_data, +}; + +static struct platform_device emmc_fixed_voltage = { + .name = "reg-fixed-voltage", + .id = FIXED_REG_ID_MMC, + .dev = { + .platform_data = &emmc_fixed_voltage_config, + }, +}; + +/* SD */ +static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = { + .max_width = 4, + .host_caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | + MMC_CAP_DISABLE, + .ext_cd_gpio = EXYNOS4_GPX3(3), /* XEINT_27 */ + .ext_cd_gpio_invert = 1, + .cd_type = S3C_SDHCI_CD_GPIO, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +/* WLAN */ +static struct s3c_sdhci_platdata nuri_hsmmc3_data __initdata = { + .max_width = 4, + .host_caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, + .cd_type = S3C_SDHCI_CD_EXTERNAL, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static void __init nuri_sdhci_init(void) +{ + s3c_sdhci0_set_platdata(&nuri_hsmmc0_data); + s3c_sdhci2_set_platdata(&nuri_hsmmc2_data); + s3c_sdhci3_set_platdata(&nuri_hsmmc3_data); +} + +/* GPIO KEYS */ +static struct gpio_keys_button nuri_gpio_keys_tables[] = { + { + .code = KEY_VOLUMEUP, + .gpio = EXYNOS4_GPX2(0), /* XEINT16 */ + .desc = "gpio-keys: KEY_VOLUMEUP", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_VOLUMEDOWN, + .gpio = EXYNOS4_GPX2(1), /* XEINT17 */ + .desc = "gpio-keys: KEY_VOLUMEDOWN", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_POWER, + .gpio = EXYNOS4_GPX2(7), /* XEINT23 */ + .desc = "gpio-keys: KEY_POWER", + .type = EV_KEY, + .active_low = 1, + .wakeup = 1, + .debounce_interval = 1, + }, +}; + +static struct gpio_keys_platform_data nuri_gpio_keys_data = { + .buttons = nuri_gpio_keys_tables, + .nbuttons = ARRAY_SIZE(nuri_gpio_keys_tables), +}; + +static struct platform_device nuri_gpio_keys = { + .name = "gpio-keys", + .dev = { + .platform_data = &nuri_gpio_keys_data, + }, +}; + +static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power) +{ + int gpio = EXYNOS4_GPE1(5); + + gpio_request(gpio, "LVDS_nSHDN"); + gpio_direction_output(gpio, power); + gpio_free(gpio); +} + +static int nuri_bl_init(struct device *dev) +{ + int ret, gpio = EXYNOS4_GPE2(3); + + ret = gpio_request(gpio, "LCD_LDO_EN"); + if (!ret) + gpio_direction_output(gpio, 0); + + return ret; +} + +static int nuri_bl_notify(struct device *dev, int brightness) +{ + if (brightness < 1) + brightness = 0; + + gpio_set_value(EXYNOS4_GPE2(3), 1); + + return brightness; +} + +static void nuri_bl_exit(struct device *dev) +{ + gpio_free(EXYNOS4_GPE2(3)); +} + +/* nuri pwm backlight */ +static struct platform_pwm_backlight_data nuri_backlight_data = { + .pwm_id = 0, + .pwm_period_ns = 30000, + .max_brightness = 100, + .dft_brightness = 50, + .init = nuri_bl_init, + .notify = nuri_bl_notify, + .exit = nuri_bl_exit, +}; + +static struct platform_device nuri_backlight_device = { + .name = "pwm-backlight", + .id = -1, + .dev = { + .parent = &s3c_device_timer[0].dev, + .platform_data = &nuri_backlight_data, + }, +}; + +static struct plat_lcd_data nuri_lcd_platform_data = { + .set_power = nuri_lcd_power_on, +}; + +static struct platform_device nuri_lcd_device = { + .name = "platform-lcd", + .id = -1, + .dev = { + .platform_data = &nuri_lcd_platform_data, + }, +}; + +/* I2C1 */ +static struct i2c_board_info i2c1_devs[] __initdata = { + /* Gyro, To be updated */ +}; + +/* GPIO I2C 5 (PMIC) */ +static struct i2c_board_info i2c5_devs[] __initdata = { + /* max8997, To be updated */ +}; + +static struct platform_device *nuri_devices[] __initdata = { + /* Samsung Platform Devices */ + &emmc_fixed_voltage, + &s3c_device_hsmmc0, + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, + &s3c_device_wdt, + &s3c_device_timer[0], + + /* NURI Devices */ + &nuri_gpio_keys, + &nuri_lcd_device, + &nuri_backlight_device, +}; + +static void __init nuri_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs)); +} + +static void __init nuri_machine_init(void) +{ + nuri_sdhci_init(); + + i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); + i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); + + /* Last */ + platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices)); +} + +MACHINE_START(NURI, "NURI") + /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = exynos4_init_irq, + .map_io = nuri_map_io, + .init_machine = nuri_machine_init, + .timer = &exynos4_timer, +MACHINE_END diff --git a/arch/arm/mach-s5pv310/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c index d9cab02e23c..25a25681812 100644 --- a/arch/arm/mach-s5pv310/mach-smdkc210.c +++ b/arch/arm/mach-exynos4/mach-smdkc210.c @@ -1,7 +1,7 @@ -/* linux/arch/arm/mach-s5pv310/mach-smdkc210.c +/* linux/arch/arm/mach-exynos4/mach-smdkc210.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -21,7 +21,7 @@ #include <plat/regs-serial.h> #include <plat/regs-srom.h> -#include <plat/s5pv310.h> +#include <plat/exynos4.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/sdhci.h> @@ -77,10 +77,10 @@ static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = { static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = { .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK0(2), + .ext_cd_gpio = EXYNOS4_GPK0(2), .ext_cd_gpio_invert = 1, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -#ifdef CONFIG_S5PV310_SDHCI_CH0_8BIT +#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT .max_width = 8, .host_caps = MMC_CAP_8_BIT_DATA, #endif @@ -88,17 +88,17 @@ static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = { static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = { .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK0(2), + .ext_cd_gpio = EXYNOS4_GPK0(2), .ext_cd_gpio_invert = 1, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = { .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK2(2), + .ext_cd_gpio = EXYNOS4_GPK2(2), .ext_cd_gpio_invert = 1, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -#ifdef CONFIG_S5PV310_SDHCI_CH2_8BIT +#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT .max_width = 8, .host_caps = MMC_CAP_8_BIT_DATA, #endif @@ -106,15 +106,15 @@ static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = { static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = { .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK2(2), + .ext_cd_gpio = EXYNOS4_GPK2(2), .ext_cd_gpio_invert = 1, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; static struct resource smdkc210_smsc911x_resources[] = { [0] = { - .start = S5PV310_PA_SROM_BANK(1), - .end = S5PV310_PA_SROM_BANK(1) + SZ_64K - 1, + .start = EXYNOS4_PA_SROM_BANK(1), + .end = EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -154,16 +154,16 @@ static struct platform_device *smdkc210_devices[] __initdata = { &s3c_device_i2c1, &s3c_device_rtc, &s3c_device_wdt, - &s5pv310_device_ac97, - &s5pv310_device_i2s0, - &s5pv310_device_pd[PD_MFC], - &s5pv310_device_pd[PD_G3D], - &s5pv310_device_pd[PD_LCD0], - &s5pv310_device_pd[PD_LCD1], - &s5pv310_device_pd[PD_CAM], - &s5pv310_device_pd[PD_TV], - &s5pv310_device_pd[PD_GPS], - &s5pv310_device_sysmmu, + &exynos4_device_ac97, + &exynos4_device_i2s0, + &exynos4_device_pd[PD_MFC], + &exynos4_device_pd[PD_G3D], + &exynos4_device_pd[PD_LCD0], + &exynos4_device_pd[PD_LCD1], + &exynos4_device_pd[PD_CAM], + &exynos4_device_pd[PD_TV], + &exynos4_device_pd[PD_GPS], + &exynos4_device_sysmmu, &samsung_asoc_dma, &smdkc210_smsc911x, }; @@ -216,8 +216,8 @@ static void __init smdkc210_machine_init(void) MACHINE_START(SMDKC210, "SMDKC210") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ .boot_params = S5P_PA_SDRAM + 0x100, - .init_irq = s5pv310_init_irq, + .init_irq = exynos4_init_irq, .map_io = smdkc210_map_io, .init_machine = smdkc210_machine_init, - .timer = &s5pv310_timer, + .timer = &exynos4_timer, MACHINE_END diff --git a/arch/arm/mach-s5pv310/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c index b1cddbf3c61..88e0275143b 100644 --- a/arch/arm/mach-s5pv310/mach-smdkv310.c +++ b/arch/arm/mach-exynos4/mach-smdkv310.c @@ -1,7 +1,7 @@ -/* linux/arch/arm/mach-s5pv310/mach-smdkv310.c +/* linux/arch/arm/mach-exynos4/mach-smdkv310.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -15,15 +15,17 @@ #include <linux/smsc911x.h> #include <linux/io.h> #include <linux/i2c.h> +#include <linux/input.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> #include <plat/regs-serial.h> #include <plat/regs-srom.h> -#include <plat/s5pv310.h> +#include <plat/exynos4.h> #include <plat/cpu.h> #include <plat/devs.h> +#include <plat/keypad.h> #include <plat/sdhci.h> #include <plat/iic.h> #include <plat/pd.h> @@ -77,10 +79,10 @@ static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = { static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = { .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK0(2), + .ext_cd_gpio = EXYNOS4_GPK0(2), .ext_cd_gpio_invert = 1, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -#ifdef CONFIG_S5PV310_SDHCI_CH0_8BIT +#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT .max_width = 8, .host_caps = MMC_CAP_8_BIT_DATA, #endif @@ -88,17 +90,17 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = { static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = { .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK0(2), + .ext_cd_gpio = EXYNOS4_GPK0(2), .ext_cd_gpio_invert = 1, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = { .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK2(2), + .ext_cd_gpio = EXYNOS4_GPK2(2), .ext_cd_gpio_invert = 1, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -#ifdef CONFIG_S5PV310_SDHCI_CH2_8BIT +#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT .max_width = 8, .host_caps = MMC_CAP_8_BIT_DATA, #endif @@ -106,15 +108,15 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = { static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = { .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK2(2), + .ext_cd_gpio = EXYNOS4_GPK2(2), .ext_cd_gpio_invert = 1, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; static struct resource smdkv310_smsc911x_resources[] = { [0] = { - .start = S5PV310_PA_SROM_BANK(1), - .end = S5PV310_PA_SROM_BANK(1) + SZ_64K - 1, + .start = EXYNOS4_PA_SROM_BANK(1), + .end = EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -142,6 +144,25 @@ static struct platform_device smdkv310_smsc911x = { }, }; +static uint32_t smdkv310_keymap[] __initdata = { + /* KEY(row, col, keycode) */ + KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3), + KEY(0, 6, KEY_4), KEY(0, 7, KEY_5), + KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C), + KEY(1, 6, KEY_D), KEY(1, 7, KEY_E) +}; + +static struct matrix_keymap_data smdkv310_keymap_data __initdata = { + .keymap = smdkv310_keymap, + .keymap_size = ARRAY_SIZE(smdkv310_keymap), +}; + +static struct samsung_keypad_platdata smdkv310_keypad_data __initdata = { + .keymap_data = &smdkv310_keymap_data, + .rows = 2, + .cols = 8, +}; + static struct i2c_board_info i2c_devs1[] __initdata = { {I2C_BOARD_INFO("wm8994", 0x1a),}, }; @@ -154,16 +175,17 @@ static struct platform_device *smdkv310_devices[] __initdata = { &s3c_device_i2c1, &s3c_device_rtc, &s3c_device_wdt, - &s5pv310_device_ac97, - &s5pv310_device_i2s0, - &s5pv310_device_pd[PD_MFC], - &s5pv310_device_pd[PD_G3D], - &s5pv310_device_pd[PD_LCD0], - &s5pv310_device_pd[PD_LCD1], - &s5pv310_device_pd[PD_CAM], - &s5pv310_device_pd[PD_TV], - &s5pv310_device_pd[PD_GPS], - &s5pv310_device_sysmmu, + &exynos4_device_ac97, + &exynos4_device_i2s0, + &samsung_device_keypad, + &exynos4_device_pd[PD_MFC], + &exynos4_device_pd[PD_G3D], + &exynos4_device_pd[PD_LCD0], + &exynos4_device_pd[PD_LCD1], + &exynos4_device_pd[PD_CAM], + &exynos4_device_pd[PD_TV], + &exynos4_device_pd[PD_GPS], + &exynos4_device_sysmmu, &samsung_asoc_dma, &smdkv310_smsc911x, }; @@ -210,6 +232,8 @@ static void __init smdkv310_machine_init(void) s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata); s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata); + samsung_keypad_set_platdata(&smdkv310_keypad_data); + platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices)); } @@ -217,8 +241,8 @@ MACHINE_START(SMDKV310, "SMDKV310") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */ .boot_params = S5P_PA_SDRAM + 0x100, - .init_irq = s5pv310_init_irq, + .init_irq = exynos4_init_irq, .map_io = smdkv310_map_io, .init_machine = smdkv310_machine_init, - .timer = &s5pv310_timer, + .timer = &exynos4_timer, MACHINE_END diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c new file mode 100644 index 00000000000..97d329fff2c --- /dev/null +++ b/arch/arm/mach-exynos4/mach-universal_c210.c @@ -0,0 +1,650 @@ +/* linux/arch/arm/mach-exynos4/mach-universal_c210.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/platform_device.h> +#include <linux/serial_core.h> +#include <linux/input.h> +#include <linux/i2c.h> +#include <linux/gpio_keys.h> +#include <linux/gpio.h> +#include <linux/mfd/max8998.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/max8952.h> +#include <linux/mmc/host.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <plat/regs-serial.h> +#include <plat/exynos4.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/iic.h> +#include <plat/sdhci.h> + +#include <mach/map.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define UNIVERSAL_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define UNIVERSAL_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG256 | \ + S5PV210_UFCON_RXTRIG256) + +static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .ucon = UNIVERSAL_UCON_DEFAULT, + .ulcon = UNIVERSAL_ULCON_DEFAULT, + .ufcon = UNIVERSAL_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .ucon = UNIVERSAL_UCON_DEFAULT, + .ulcon = UNIVERSAL_ULCON_DEFAULT, + .ufcon = UNIVERSAL_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .ucon = UNIVERSAL_UCON_DEFAULT, + .ulcon = UNIVERSAL_ULCON_DEFAULT, + .ufcon = UNIVERSAL_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .ucon = UNIVERSAL_UCON_DEFAULT, + .ulcon = UNIVERSAL_ULCON_DEFAULT, + .ufcon = UNIVERSAL_UFCON_DEFAULT, + }, +}; + +static struct regulator_consumer_supply max8952_consumer = + REGULATOR_SUPPLY("vddarm", NULL); + +static struct max8952_platform_data universal_max8952_pdata __initdata = { + .gpio_vid0 = EXYNOS4_GPX0(3), + .gpio_vid1 = EXYNOS4_GPX0(4), + .gpio_en = -1, /* Not controllable, set "Always High" */ + .default_mode = 0, /* vid0 = 0, vid1 = 0 */ + .dvs_mode = { 48, 32, 28, 18 }, /* 1.25, 1.20, 1.05, 0.95V */ + .sync_freq = 0, /* default: fastest */ + .ramp_speed = 0, /* default: fastest */ + + .reg_data = { + .constraints = { + .name = "VARM_1.2V", + .min_uV = 770000, + .max_uV = 1400000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &max8952_consumer, + }, +}; + +static struct regulator_consumer_supply lp3974_buck1_consumer = + REGULATOR_SUPPLY("vddint", NULL); + +static struct regulator_consumer_supply lp3974_buck2_consumer = + REGULATOR_SUPPLY("vddg3d", NULL); + +static struct regulator_init_data lp3974_buck1_data = { + .constraints = { + .name = "VINT_1.1V", + .min_uV = 750000, + .max_uV = 1500000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &lp3974_buck1_consumer, +}; + +static struct regulator_init_data lp3974_buck2_data = { + .constraints = { + .name = "VG3D_1.1V", + .min_uV = 750000, + .max_uV = 1500000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &lp3974_buck2_consumer, +}; + +static struct regulator_init_data lp3974_buck3_data = { + .constraints = { + .name = "VCC_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_buck4_data = { + .constraints = { + .name = "VMEM_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo2_data = { + .constraints = { + .name = "VALIVE_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo3_data = { + .constraints = { + .name = "VUSB+MIPI_1.1V", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo4_data = { + .constraints = { + .name = "VADC_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo5_data = { + .constraints = { + .name = "VTF_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo6_data = { + .constraints = { + .name = "LDO6", + .min_uV = 2000000, + .max_uV = 2000000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo7_data = { + .constraints = { + .name = "VLCD+VMIPI_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo8_data = { + .constraints = { + .name = "VUSB+VDAC_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo9_data = { + .constraints = { + .name = "VCC_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo10_data = { + .constraints = { + .name = "VPLL_1.1V", + .min_uV = 1100000, + .max_uV = 1100000, + .boot_on = 1, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo11_data = { + .constraints = { + .name = "CAM_AF_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo12_data = { + .constraints = { + .name = "PS_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo13_data = { + .constraints = { + .name = "VHIC_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo14_data = { + .constraints = { + .name = "CAM_I_HOST_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo15_data = { + .constraints = { + .name = "CAM_S_DIG+FM33_CORE_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo16_data = { + .constraints = { + .name = "CAM_S_ANA_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo17_data = { + .constraints = { + .name = "VCC_3.0V_LCD", + .min_uV = 3000000, + .max_uV = 3000000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_32khz_ap_data = { + .constraints = { + .name = "32KHz AP", + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_32khz_cp_data = { + .constraints = { + .name = "32KHz CP", + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_vichg_data = { + .constraints = { + .name = "VICHG", + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_esafeout1_data = { + .constraints = { + .name = "SAFEOUT1", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_esafeout2_data = { + .constraints = { + .name = "SAFEOUT2", + .boot_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct max8998_regulator_data lp3974_regulators[] = { + { MAX8998_LDO2, &lp3974_ldo2_data }, + { MAX8998_LDO3, &lp3974_ldo3_data }, + { MAX8998_LDO4, &lp3974_ldo4_data }, + { MAX8998_LDO5, &lp3974_ldo5_data }, + { MAX8998_LDO6, &lp3974_ldo6_data }, + { MAX8998_LDO7, &lp3974_ldo7_data }, + { MAX8998_LDO8, &lp3974_ldo8_data }, + { MAX8998_LDO9, &lp3974_ldo9_data }, + { MAX8998_LDO10, &lp3974_ldo10_data }, + { MAX8998_LDO11, &lp3974_ldo11_data }, + { MAX8998_LDO12, &lp3974_ldo12_data }, + { MAX8998_LDO13, &lp3974_ldo13_data }, + { MAX8998_LDO14, &lp3974_ldo14_data }, + { MAX8998_LDO15, &lp3974_ldo15_data }, + { MAX8998_LDO16, &lp3974_ldo16_data }, + { MAX8998_LDO17, &lp3974_ldo17_data }, + { MAX8998_BUCK1, &lp3974_buck1_data }, + { MAX8998_BUCK2, &lp3974_buck2_data }, + { MAX8998_BUCK3, &lp3974_buck3_data }, + { MAX8998_BUCK4, &lp3974_buck4_data }, + { MAX8998_EN32KHZ_AP, &lp3974_32khz_ap_data }, + { MAX8998_EN32KHZ_CP, &lp3974_32khz_cp_data }, + { MAX8998_ENVICHG, &lp3974_vichg_data }, + { MAX8998_ESAFEOUT1, &lp3974_esafeout1_data }, + { MAX8998_ESAFEOUT2, &lp3974_esafeout2_data }, +}; + +static struct max8998_platform_data universal_lp3974_pdata = { + .num_regulators = ARRAY_SIZE(lp3974_regulators), + .regulators = lp3974_regulators, + .buck1_voltage1 = 1100000, /* INT */ + .buck1_voltage2 = 1000000, + .buck1_voltage3 = 1100000, + .buck1_voltage4 = 1000000, + .buck1_set1 = EXYNOS4_GPX0(5), + .buck1_set2 = EXYNOS4_GPX0(6), + .buck2_voltage1 = 1200000, /* G3D */ + .buck2_voltage2 = 1100000, + .buck1_default_idx = 0, + .buck2_set3 = EXYNOS4_GPE2(0), + .buck2_default_idx = 0, + .wakeup = true, +}; + +/* GPIO I2C 5 (PMIC) */ +static struct i2c_board_info i2c5_devs[] __initdata = { + { + I2C_BOARD_INFO("max8952", 0xC0 >> 1), + .platform_data = &universal_max8952_pdata, + }, { + I2C_BOARD_INFO("lp3974", 0xCC >> 1), + .platform_data = &universal_lp3974_pdata, + }, +}; + +/* GPIO KEYS */ +static struct gpio_keys_button universal_gpio_keys_tables[] = { + { + .code = KEY_VOLUMEUP, + .gpio = EXYNOS4_GPX2(0), /* XEINT16 */ + .desc = "gpio-keys: KEY_VOLUMEUP", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_VOLUMEDOWN, + .gpio = EXYNOS4_GPX2(1), /* XEINT17 */ + .desc = "gpio-keys: KEY_VOLUMEDOWN", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_CONFIG, + .gpio = EXYNOS4_GPX2(2), /* XEINT18 */ + .desc = "gpio-keys: KEY_CONFIG", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_CAMERA, + .gpio = EXYNOS4_GPX2(3), /* XEINT19 */ + .desc = "gpio-keys: KEY_CAMERA", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_OK, + .gpio = EXYNOS4_GPX3(5), /* XEINT29 */ + .desc = "gpio-keys: KEY_OK", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, +}; + +static struct gpio_keys_platform_data universal_gpio_keys_data = { + .buttons = universal_gpio_keys_tables, + .nbuttons = ARRAY_SIZE(universal_gpio_keys_tables), +}; + +static struct platform_device universal_gpio_keys = { + .name = "gpio-keys", + .dev = { + .platform_data = &universal_gpio_keys_data, + }, +}; + +/* eMMC */ +static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { + .max_width = 8, + .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | + MMC_CAP_DISABLE), + .cd_type = S3C_SDHCI_CD_PERMANENT, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static struct regulator_consumer_supply mmc0_supplies[] = { + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), +}; + +static struct regulator_init_data mmc0_fixed_voltage_init_data = { + .constraints = { + .name = "VMEM_VDD_2.8V", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(mmc0_supplies), + .consumer_supplies = mmc0_supplies, +}; + +static struct fixed_voltage_config mmc0_fixed_voltage_config = { + .supply_name = "MASSMEMORY_EN", + .microvolts = 2800000, + .gpio = EXYNOS4_GPE1(3), + .enable_high = true, + .init_data = &mmc0_fixed_voltage_init_data, +}; + +static struct platform_device mmc0_fixed_voltage = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &mmc0_fixed_voltage_config, + }, +}; + +/* SD */ +static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = { + .max_width = 4, + .host_caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | + MMC_CAP_DISABLE, + .ext_cd_gpio = EXYNOS4_GPX3(4), /* XEINT_28 */ + .ext_cd_gpio_invert = 1, + .cd_type = S3C_SDHCI_CD_GPIO, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +/* WiFi */ +static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = { + .max_width = 4, + .host_caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | + MMC_CAP_DISABLE, + .cd_type = S3C_SDHCI_CD_EXTERNAL, +}; + +static void __init universal_sdhci_init(void) +{ + s3c_sdhci0_set_platdata(&universal_hsmmc0_data); + s3c_sdhci2_set_platdata(&universal_hsmmc2_data); + s3c_sdhci3_set_platdata(&universal_hsmmc3_data); +} + +/* I2C0 */ +static struct i2c_board_info i2c0_devs[] __initdata = { + /* Camera, To be updated */ +}; + +/* I2C1 */ +static struct i2c_board_info i2c1_devs[] __initdata = { + /* Gyro, To be updated */ +}; + +static struct platform_device *universal_devices[] __initdata = { + /* Samsung Platform Devices */ + &mmc0_fixed_voltage, + &s3c_device_hsmmc0, + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, + &s3c_device_i2c5, + + /* Universal Devices */ + &universal_gpio_keys, + &s5p_device_onenand, +}; + +static void __init universal_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); +} + +static void __init universal_machine_init(void) +{ + universal_sdhci_init(); + + i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs)); + i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); + + s3c_i2c5_set_platdata(NULL); + i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); + + /* Last */ + platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices)); +} + +MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") + /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = exynos4_init_irq, + .map_io = universal_map_io, + .init_machine = universal_machine_init, + .timer = &exynos4_timer, +MACHINE_END diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c new file mode 100644 index 00000000000..af82a8fbb68 --- /dev/null +++ b/arch/arm/mach-exynos4/mct.c @@ -0,0 +1,421 @@ +/* linux/arch/arm/mach-exynos4/mct.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 MCT(Multi-Core Timer) support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/percpu.h> + +#include <mach/map.h> +#include <mach/regs-mct.h> +#include <asm/mach/time.h> + +static unsigned long clk_cnt_per_tick; +static unsigned long clk_rate; + +struct mct_clock_event_device { + struct clock_event_device *evt; + void __iomem *base; +}; + +struct mct_clock_event_device mct_tick[2]; + +static void exynos4_mct_write(unsigned int value, void *addr) +{ + void __iomem *stat_addr; + u32 mask; + u32 i; + + __raw_writel(value, addr); + + switch ((u32) addr) { + case (u32) EXYNOS4_MCT_G_TCON: + stat_addr = EXYNOS4_MCT_G_WSTAT; + mask = 1 << 16; /* G_TCON write status */ + break; + case (u32) EXYNOS4_MCT_G_COMP0_L: + stat_addr = EXYNOS4_MCT_G_WSTAT; + mask = 1 << 0; /* G_COMP0_L write status */ + break; + case (u32) EXYNOS4_MCT_G_COMP0_U: + stat_addr = EXYNOS4_MCT_G_WSTAT; + mask = 1 << 1; /* G_COMP0_U write status */ + break; + case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR: + stat_addr = EXYNOS4_MCT_G_WSTAT; + mask = 1 << 2; /* G_COMP0_ADD_INCR write status */ + break; + case (u32) EXYNOS4_MCT_G_CNT_L: + stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; + mask = 1 << 0; /* G_CNT_L write status */ + break; + case (u32) EXYNOS4_MCT_G_CNT_U: + stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; + mask = 1 << 1; /* G_CNT_U write status */ + break; + case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCON_OFFSET): + stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET; + mask = 1 << 3; /* L0_TCON write status */ + break; + case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCON_OFFSET): + stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET; + mask = 1 << 3; /* L1_TCON write status */ + break; + case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCNTB_OFFSET): + stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET; + mask = 1 << 0; /* L0_TCNTB write status */ + break; + case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCNTB_OFFSET): + stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET; + mask = 1 << 0; /* L1_TCNTB write status */ + break; + case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_ICNTB_OFFSET): + stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET; + mask = 1 << 1; /* L0_ICNTB write status */ + break; + case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_ICNTB_OFFSET): + stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET; + mask = 1 << 1; /* L1_ICNTB write status */ + break; + default: + return; + } + + /* Wait maximum 1 ms until written values are applied */ + for (i = 0; i < loops_per_jiffy / 1000 * HZ; i++) + if (__raw_readl(stat_addr) & mask) { + __raw_writel(mask, stat_addr); + return; + } + + panic("MCT hangs after writing %d (addr:0x%08x)\n", value, (u32)addr); +} + +/* Clocksource handling */ +static void exynos4_mct_frc_start(u32 hi, u32 lo) +{ + u32 reg; + + exynos4_mct_write(lo, EXYNOS4_MCT_G_CNT_L); + exynos4_mct_write(hi, EXYNOS4_MCT_G_CNT_U); + + reg = __raw_readl(EXYNOS4_MCT_G_TCON); + reg |= MCT_G_TCON_START; + exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON); +} + +static cycle_t exynos4_frc_read(struct clocksource *cs) +{ + unsigned int lo, hi; + u32 hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U); + + do { + hi = hi2; + lo = __raw_readl(EXYNOS4_MCT_G_CNT_L); + hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U); + } while (hi != hi2); + + return ((cycle_t)hi << 32) | lo; +} + +struct clocksource mct_frc = { + .name = "mct-frc", + .rating = 400, + .read = exynos4_frc_read, + .mask = CLOCKSOURCE_MASK(64), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void __init exynos4_clocksource_init(void) +{ + exynos4_mct_frc_start(0, 0); + + if (clocksource_register_hz(&mct_frc, clk_rate)) + panic("%s: can't register clocksource\n", mct_frc.name); +} + +static void exynos4_mct_comp0_stop(void) +{ + unsigned int tcon; + + tcon = __raw_readl(EXYNOS4_MCT_G_TCON); + tcon &= ~(MCT_G_TCON_COMP0_ENABLE | MCT_G_TCON_COMP0_AUTO_INC); + + exynos4_mct_write(tcon, EXYNOS4_MCT_G_TCON); + exynos4_mct_write(0, EXYNOS4_MCT_G_INT_ENB); +} + +static void exynos4_mct_comp0_start(enum clock_event_mode mode, + unsigned long cycles) +{ + unsigned int tcon; + cycle_t comp_cycle; + + tcon = __raw_readl(EXYNOS4_MCT_G_TCON); + + if (mode == CLOCK_EVT_MODE_PERIODIC) { + tcon |= MCT_G_TCON_COMP0_AUTO_INC; + exynos4_mct_write(cycles, EXYNOS4_MCT_G_COMP0_ADD_INCR); + } + + comp_cycle = exynos4_frc_read(&mct_frc) + cycles; + exynos4_mct_write((u32)comp_cycle, EXYNOS4_MCT_G_COMP0_L); + exynos4_mct_write((u32)(comp_cycle >> 32), EXYNOS4_MCT_G_COMP0_U); + + exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_ENB); + + tcon |= MCT_G_TCON_COMP0_ENABLE; + exynos4_mct_write(tcon , EXYNOS4_MCT_G_TCON); +} + +static int exynos4_comp_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + exynos4_mct_comp0_start(evt->mode, cycles); + + return 0; +} + +static void exynos4_comp_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + exynos4_mct_comp0_stop(); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + exynos4_mct_comp0_start(mode, clk_cnt_per_tick); + break; + + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static struct clock_event_device mct_comp_device = { + .name = "mct-comp", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .rating = 250, + .set_next_event = exynos4_comp_set_next_event, + .set_mode = exynos4_comp_set_mode, +}; + +static irqreturn_t exynos4_mct_comp_isr(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_CSTAT); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction mct_comp_event_irq = { + .name = "mct_comp_irq", + .flags = IRQF_TIMER | IRQF_IRQPOLL, + .handler = exynos4_mct_comp_isr, + .dev_id = &mct_comp_device, +}; + +static void exynos4_clockevent_init(void) +{ + clk_cnt_per_tick = clk_rate / 2 / HZ; + + clockevents_calc_mult_shift(&mct_comp_device, clk_rate / 2, 5); + mct_comp_device.max_delta_ns = + clockevent_delta2ns(0xffffffff, &mct_comp_device); + mct_comp_device.min_delta_ns = + clockevent_delta2ns(0xf, &mct_comp_device); + mct_comp_device.cpumask = cpumask_of(0); + clockevents_register_device(&mct_comp_device); + + setup_irq(IRQ_MCT_G0, &mct_comp_event_irq); +} + +#ifdef CONFIG_LOCAL_TIMERS +/* Clock event handling */ +static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt) +{ + unsigned long tmp; + unsigned long mask = MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START; + void __iomem *addr = mevt->base + MCT_L_TCON_OFFSET; + + tmp = __raw_readl(addr); + if (tmp & mask) { + tmp &= ~mask; + exynos4_mct_write(tmp, addr); + } +} + +static void exynos4_mct_tick_start(unsigned long cycles, + struct mct_clock_event_device *mevt) +{ + unsigned long tmp; + + exynos4_mct_tick_stop(mevt); + + tmp = (1 << 31) | cycles; /* MCT_L_UPDATE_ICNTB */ + + /* update interrupt count buffer */ + exynos4_mct_write(tmp, mevt->base + MCT_L_ICNTB_OFFSET); + + /* enable MCT tick interupt */ + exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET); + + tmp = __raw_readl(mevt->base + MCT_L_TCON_OFFSET); + tmp |= MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START | + MCT_L_TCON_INTERVAL_MODE; + exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET); +} + +static int exynos4_tick_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + struct mct_clock_event_device *mevt = &mct_tick[smp_processor_id()]; + + exynos4_mct_tick_start(cycles, mevt); + + return 0; +} + +static inline void exynos4_tick_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + struct mct_clock_event_device *mevt = &mct_tick[smp_processor_id()]; + + exynos4_mct_tick_stop(mevt); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + exynos4_mct_tick_start(clk_cnt_per_tick, mevt); + break; + + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id) +{ + struct mct_clock_event_device *mevt = dev_id; + struct clock_event_device *evt = mevt->evt; + + /* + * This is for supporting oneshot mode. + * Mct would generate interrupt periodically + * without explicit stopping. + */ + if (evt->mode != CLOCK_EVT_MODE_PERIODIC) + exynos4_mct_tick_stop(mevt); + + /* Clear the MCT tick interrupt */ + exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction mct_tick0_event_irq = { + .name = "mct_tick0_irq", + .flags = IRQF_TIMER | IRQF_NOBALANCING, + .handler = exynos4_mct_tick_isr, +}; + +static struct irqaction mct_tick1_event_irq = { + .name = "mct_tick1_irq", + .flags = IRQF_TIMER | IRQF_NOBALANCING, + .handler = exynos4_mct_tick_isr, +}; + +static void exynos4_mct_tick_init(struct clock_event_device *evt) +{ + unsigned int cpu = smp_processor_id(); + + mct_tick[cpu].evt = evt; + + if (cpu == 0) { + mct_tick[cpu].base = EXYNOS4_MCT_L0_BASE; + evt->name = "mct_tick0"; + } else { + mct_tick[cpu].base = EXYNOS4_MCT_L1_BASE; + evt->name = "mct_tick1"; + } + + evt->cpumask = cpumask_of(cpu); + evt->set_next_event = exynos4_tick_set_next_event; + evt->set_mode = exynos4_tick_set_mode; + evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + evt->rating = 450; + + clockevents_calc_mult_shift(evt, clk_rate / 2, 5); + evt->max_delta_ns = + clockevent_delta2ns(0x7fffffff, evt); + evt->min_delta_ns = + clockevent_delta2ns(0xf, evt); + + clockevents_register_device(evt); + + exynos4_mct_write(0x1, mct_tick[cpu].base + MCT_L_TCNTB_OFFSET); + + if (cpu == 0) { + mct_tick0_event_irq.dev_id = &mct_tick[cpu]; + setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq); + } else { + mct_tick1_event_irq.dev_id = &mct_tick[cpu]; + irq_set_affinity(IRQ_MCT1, cpumask_of(1)); + setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq); + } +} + +/* Setup the local clock events for a CPU */ +void __cpuinit local_timer_setup(struct clock_event_device *evt) +{ + exynos4_mct_tick_init(evt); +} + +int local_timer_ack(void) +{ + return 0; +} + +#endif /* CONFIG_LOCAL_TIMERS */ + +static void __init exynos4_timer_resources(void) +{ + struct clk *mct_clk; + mct_clk = clk_get(NULL, "xtal"); + + clk_rate = clk_get_rate(mct_clk); +} + +static void __init exynos4_timer_init(void) +{ + exynos4_timer_resources(); + exynos4_clocksource_init(); + exynos4_clockevent_init(); +} + +struct sys_timer exynos4_timer = { + .init = exynos4_timer_init, +}; diff --git a/arch/arm/mach-s5pv310/platsmp.c b/arch/arm/mach-exynos4/platsmp.c index 34093b069f6..6d35878ec1a 100644 --- a/arch/arm/mach-s5pv310/platsmp.c +++ b/arch/arm/mach-exynos4/platsmp.c @@ -1,7 +1,7 @@ -/* linux/arch/arm/mach-s5pv310/platsmp.c +/* linux/arch/arm/mach-exynos4/platsmp.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Cloned from linux/arch/arm/mach-vexpress/platsmp.c * @@ -28,7 +28,7 @@ #include <mach/hardware.h> #include <mach/regs-clock.h> -extern void s5pv310_secondary_startup(void); +extern void exynos4_secondary_startup(void); /* * control for which core is the next to come out of the secondary @@ -139,7 +139,7 @@ void __init smp_init_cpus(void) /* sanity check */ if (ncores > NR_CPUS) { printk(KERN_WARNING - "S5PV310: no. of cores (%d) greater than configured " + "EXYNOS4: no. of cores (%d) greater than configured " "maximum of %d - clipping\n", ncores, NR_CPUS); ncores = NR_CPUS; @@ -168,5 +168,5 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * until it receives a soft interrupt, and then the * secondary CPU branches to this address. */ - __raw_writel(BSYM(virt_to_phys(s5pv310_secondary_startup)), S5P_VA_SYSRAM); + __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), S5P_VA_SYSRAM); } diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c new file mode 100644 index 00000000000..10d917d9e3a --- /dev/null +++ b/arch/arm/mach-exynos4/pm.c @@ -0,0 +1,420 @@ +/* linux/arch/arm/mach-exynos4/pm.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4210 - Power Management support + * + * Based on arch/arm/mach-s3c2410/pm.c + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/suspend.h> +#include <linux/io.h> + +#include <asm/cacheflush.h> +#include <asm/hardware/cache-l2x0.h> + +#include <plat/cpu.h> +#include <plat/pm.h> + +#include <mach/regs-irq.h> +#include <mach/regs-gpio.h> +#include <mach/regs-clock.h> +#include <mach/regs-pmu.h> +#include <mach/pm-core.h> + +static struct sleep_save exynos4_sleep[] = { + { .reg = S5P_ARM_CORE0_LOWPWR , .val = 0x2, }, + { .reg = S5P_DIS_IRQ_CORE0 , .val = 0x0, }, + { .reg = S5P_DIS_IRQ_CENTRAL0 , .val = 0x0, }, + { .reg = S5P_ARM_CORE1_LOWPWR , .val = 0x2, }, + { .reg = S5P_DIS_IRQ_CORE1 , .val = 0x0, }, + { .reg = S5P_DIS_IRQ_CENTRAL1 , .val = 0x0, }, + { .reg = S5P_ARM_COMMON_LOWPWR , .val = 0x2, }, + { .reg = S5P_L2_0_LOWPWR , .val = 0x3, }, + { .reg = S5P_L2_1_LOWPWR , .val = 0x3, }, + { .reg = S5P_CMU_ACLKSTOP_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_SCLKSTOP_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_RESET_LOWPWR , .val = 0x0, }, + { .reg = S5P_APLL_SYSCLK_LOWPWR , .val = 0x0, }, + { .reg = S5P_MPLL_SYSCLK_LOWPWR , .val = 0x0, }, + { .reg = S5P_VPLL_SYSCLK_LOWPWR , .val = 0x0, }, + { .reg = S5P_EPLL_SYSCLK_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_RESET_GPSALIVE_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_CLKSTOP_CAM_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_CLKSTOP_TV_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_CLKSTOP_MFC_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_CLKSTOP_G3D_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_CLKSTOP_LCD0_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_CLKSTOP_LCD1_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_CLKSTOP_MAUDIO_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_CLKSTOP_GPS_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_RESET_CAM_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_RESET_TV_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_RESET_MFC_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_RESET_G3D_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_RESET_LCD0_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_RESET_LCD1_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_RESET_MAUDIO_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_RESET_GPS_LOWPWR , .val = 0x0, }, + { .reg = S5P_TOP_BUS_LOWPWR , .val = 0x0, }, + { .reg = S5P_TOP_RETENTION_LOWPWR , .val = 0x1, }, + { .reg = S5P_TOP_PWR_LOWPWR , .val = 0x3, }, + { .reg = S5P_LOGIC_RESET_LOWPWR , .val = 0x0, }, + { .reg = S5P_ONENAND_MEM_LOWPWR , .val = 0x0, }, + { .reg = S5P_MODIMIF_MEM_LOWPWR , .val = 0x0, }, + { .reg = S5P_G2D_ACP_MEM_LOWPWR , .val = 0x0, }, + { .reg = S5P_USBOTG_MEM_LOWPWR , .val = 0x0, }, + { .reg = S5P_HSMMC_MEM_LOWPWR , .val = 0x0, }, + { .reg = S5P_CSSYS_MEM_LOWPWR , .val = 0x0, }, + { .reg = S5P_SECSS_MEM_LOWPWR , .val = 0x0, }, + { .reg = S5P_PCIE_MEM_LOWPWR , .val = 0x0, }, + { .reg = S5P_SATA_MEM_LOWPWR , .val = 0x0, }, + { .reg = S5P_PAD_RETENTION_DRAM_LOWPWR , .val = 0x0, }, + { .reg = S5P_PAD_RETENTION_MAUDIO_LOWPWR , .val = 0x0, }, + { .reg = S5P_PAD_RETENTION_GPIO_LOWPWR , .val = 0x0, }, + { .reg = S5P_PAD_RETENTION_UART_LOWPWR , .val = 0x0, }, + { .reg = S5P_PAD_RETENTION_MMCA_LOWPWR , .val = 0x0, }, + { .reg = S5P_PAD_RETENTION_MMCB_LOWPWR , .val = 0x0, }, + { .reg = S5P_PAD_RETENTION_EBIA_LOWPWR , .val = 0x0, }, + { .reg = S5P_PAD_RETENTION_EBIB_LOWPWR , .val = 0x0, }, + { .reg = S5P_PAD_RETENTION_ISOLATION_LOWPWR , .val = 0x0, }, + { .reg = S5P_PAD_RETENTION_ALV_SEL_LOWPWR , .val = 0x0, }, + { .reg = S5P_XUSBXTI_LOWPWR , .val = 0x0, }, + { .reg = S5P_XXTI_LOWPWR , .val = 0x0, }, + { .reg = S5P_EXT_REGULATOR_LOWPWR , .val = 0x0, }, + { .reg = S5P_GPIO_MODE_LOWPWR , .val = 0x0, }, + { .reg = S5P_GPIO_MODE_MAUDIO_LOWPWR , .val = 0x0, }, + { .reg = S5P_CAM_LOWPWR , .val = 0x0, }, + { .reg = S5P_TV_LOWPWR , .val = 0x0, }, + { .reg = S5P_MFC_LOWPWR , .val = 0x0, }, + { .reg = S5P_G3D_LOWPWR , .val = 0x0, }, + { .reg = S5P_LCD0_LOWPWR , .val = 0x0, }, + { .reg = S5P_LCD1_LOWPWR , .val = 0x0, }, + { .reg = S5P_MAUDIO_LOWPWR , .val = 0x0, }, + { .reg = S5P_GPS_LOWPWR , .val = 0x0, }, + { .reg = S5P_GPS_ALIVE_LOWPWR , .val = 0x0, }, +}; + +static struct sleep_save exynos4_set_clksrc[] = { + { .reg = S5P_CLKSRC_MASK_TOP , .val = 0x00000001, }, + { .reg = S5P_CLKSRC_MASK_CAM , .val = 0x11111111, }, + { .reg = S5P_CLKSRC_MASK_TV , .val = 0x00000111, }, + { .reg = S5P_CLKSRC_MASK_LCD0 , .val = 0x00001111, }, + { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, }, + { .reg = S5P_CLKSRC_MASK_MAUDIO , .val = 0x00000001, }, + { .reg = S5P_CLKSRC_MASK_FSYS , .val = 0x01011111, }, + { .reg = S5P_CLKSRC_MASK_PERIL0 , .val = 0x01111111, }, + { .reg = S5P_CLKSRC_MASK_PERIL1 , .val = 0x01110111, }, + { .reg = S5P_CLKSRC_MASK_DMC , .val = 0x00010000, }, +}; + +static struct sleep_save exynos4_core_save[] = { + /* CMU side */ + SAVE_ITEM(S5P_CLKDIV_LEFTBUS), + SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), + SAVE_ITEM(S5P_CLKDIV_RIGHTBUS), + SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS), + SAVE_ITEM(S5P_EPLL_CON0), + SAVE_ITEM(S5P_EPLL_CON1), + SAVE_ITEM(S5P_VPLL_CON0), + SAVE_ITEM(S5P_VPLL_CON1), + SAVE_ITEM(S5P_CLKSRC_TOP0), + SAVE_ITEM(S5P_CLKSRC_TOP1), + SAVE_ITEM(S5P_CLKSRC_CAM), + SAVE_ITEM(S5P_CLKSRC_MFC), + SAVE_ITEM(S5P_CLKSRC_IMAGE), + SAVE_ITEM(S5P_CLKSRC_LCD0), + SAVE_ITEM(S5P_CLKSRC_LCD1), + SAVE_ITEM(S5P_CLKSRC_MAUDIO), + SAVE_ITEM(S5P_CLKSRC_FSYS), + SAVE_ITEM(S5P_CLKSRC_PERIL0), + SAVE_ITEM(S5P_CLKSRC_PERIL1), + SAVE_ITEM(S5P_CLKDIV_CAM), + SAVE_ITEM(S5P_CLKDIV_TV), + SAVE_ITEM(S5P_CLKDIV_MFC), + SAVE_ITEM(S5P_CLKDIV_G3D), + SAVE_ITEM(S5P_CLKDIV_IMAGE), + SAVE_ITEM(S5P_CLKDIV_LCD0), + SAVE_ITEM(S5P_CLKDIV_LCD1), + SAVE_ITEM(S5P_CLKDIV_MAUDIO), + SAVE_ITEM(S5P_CLKDIV_FSYS0), + SAVE_ITEM(S5P_CLKDIV_FSYS1), + SAVE_ITEM(S5P_CLKDIV_FSYS2), + SAVE_ITEM(S5P_CLKDIV_FSYS3), + SAVE_ITEM(S5P_CLKDIV_PERIL0), + SAVE_ITEM(S5P_CLKDIV_PERIL1), + SAVE_ITEM(S5P_CLKDIV_PERIL2), + SAVE_ITEM(S5P_CLKDIV_PERIL3), + SAVE_ITEM(S5P_CLKDIV_PERIL4), + SAVE_ITEM(S5P_CLKDIV_PERIL5), + SAVE_ITEM(S5P_CLKDIV_TOP), + SAVE_ITEM(S5P_CLKSRC_MASK_CAM), + SAVE_ITEM(S5P_CLKSRC_MASK_TV), + SAVE_ITEM(S5P_CLKSRC_MASK_LCD0), + SAVE_ITEM(S5P_CLKSRC_MASK_LCD1), + SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO), + SAVE_ITEM(S5P_CLKSRC_MASK_FSYS), + SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0), + SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1), + SAVE_ITEM(S5P_CLKGATE_SCLKCAM), + SAVE_ITEM(S5P_CLKGATE_IP_CAM), + SAVE_ITEM(S5P_CLKGATE_IP_TV), + SAVE_ITEM(S5P_CLKGATE_IP_MFC), + SAVE_ITEM(S5P_CLKGATE_IP_G3D), + SAVE_ITEM(S5P_CLKGATE_IP_IMAGE), + SAVE_ITEM(S5P_CLKGATE_IP_LCD0), + SAVE_ITEM(S5P_CLKGATE_IP_LCD1), + SAVE_ITEM(S5P_CLKGATE_IP_FSYS), + SAVE_ITEM(S5P_CLKGATE_IP_GPS), + SAVE_ITEM(S5P_CLKGATE_IP_PERIL), + SAVE_ITEM(S5P_CLKGATE_IP_PERIR), + SAVE_ITEM(S5P_CLKGATE_BLOCK), + SAVE_ITEM(S5P_CLKSRC_MASK_DMC), + SAVE_ITEM(S5P_CLKSRC_DMC), + SAVE_ITEM(S5P_CLKDIV_DMC0), + SAVE_ITEM(S5P_CLKDIV_DMC1), + SAVE_ITEM(S5P_CLKGATE_IP_DMC), + SAVE_ITEM(S5P_CLKSRC_CPU), + SAVE_ITEM(S5P_CLKDIV_CPU), + SAVE_ITEM(S5P_CLKGATE_SCLKCPU), + SAVE_ITEM(S5P_CLKGATE_IP_CPU), + /* GIC side */ + SAVE_ITEM(S5P_VA_GIC_CPU + 0x000), + SAVE_ITEM(S5P_VA_GIC_CPU + 0x004), + SAVE_ITEM(S5P_VA_GIC_CPU + 0x008), + SAVE_ITEM(S5P_VA_GIC_CPU + 0x00C), + SAVE_ITEM(S5P_VA_GIC_CPU + 0x014), + SAVE_ITEM(S5P_VA_GIC_CPU + 0x018), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x000), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x004), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x100), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x104), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x108), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x300), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x304), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x308), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x400), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x404), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x408), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x40C), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x410), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x414), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x418), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x41C), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x420), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x424), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x428), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x42C), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x430), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x434), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x438), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x43C), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x440), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x444), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x448), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x44C), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x450), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x454), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x458), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x45C), + + SAVE_ITEM(S5P_VA_GIC_DIST + 0x800), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x804), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x808), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x80C), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x810), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x814), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x818), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x81C), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x820), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x824), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x828), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x82C), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x830), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x834), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x838), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x83C), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x840), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x844), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x848), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x84C), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x850), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x854), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x858), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x85C), + + SAVE_ITEM(S5P_VA_GIC_DIST + 0xC00), + SAVE_ITEM(S5P_VA_GIC_DIST + 0xC04), + SAVE_ITEM(S5P_VA_GIC_DIST + 0xC08), + SAVE_ITEM(S5P_VA_GIC_DIST + 0xC0C), + SAVE_ITEM(S5P_VA_GIC_DIST + 0xC10), + SAVE_ITEM(S5P_VA_GIC_DIST + 0xC14), + + SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x000), + SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x010), + SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x020), + SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x030), + SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x040), + SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x050), + SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x060), + SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x070), + SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x080), + SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x090), +}; + +static struct sleep_save exynos4_l2cc_save[] = { + SAVE_ITEM(S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL), + SAVE_ITEM(S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL), + SAVE_ITEM(S5P_VA_L2CC + L2X0_PREFETCH_CTRL), + SAVE_ITEM(S5P_VA_L2CC + L2X0_POWER_CTRL), + SAVE_ITEM(S5P_VA_L2CC + L2X0_AUX_CTRL), +}; + +void exynos4_cpu_suspend(void) +{ + unsigned long tmp; + unsigned long mask = 0xFFFFFFFF; + + /* Setting Central Sequence Register for power down mode */ + + tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); + tmp &= ~(S5P_CENTRAL_LOWPWR_CFG); + __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); + + /* Setting Central Sequence option Register */ + + tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION); + tmp &= ~(S5P_USE_MASK); + tmp |= S5P_USE_STANDBY_WFI0; + __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); + + /* Clear all interrupt pending to avoid early wakeup */ + + __raw_writel(mask, (S5P_VA_GIC_DIST + 0x280)); + __raw_writel(mask, (S5P_VA_GIC_DIST + 0x284)); + __raw_writel(mask, (S5P_VA_GIC_DIST + 0x288)); + + /* Disable all interrupt */ + + __raw_writel(0x0, (S5P_VA_GIC_CPU + 0x000)); + __raw_writel(0x0, (S5P_VA_GIC_DIST + 0x000)); + __raw_writel(mask, (S5P_VA_GIC_DIST + 0x184)); + __raw_writel(mask, (S5P_VA_GIC_DIST + 0x188)); + + outer_flush_all(); + + /* issue the standby signal into the pm unit. */ + cpu_do_idle(); + + /* we should never get past here */ + panic("sleep resumed to originator?"); +} + +static void exynos4_pm_prepare(void) +{ + u32 tmp; + + s3c_pm_do_save(exynos4_core_save, ARRAY_SIZE(exynos4_core_save)); + s3c_pm_do_save(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save)); + + tmp = __raw_readl(S5P_INFORM1); + + /* Set value of power down register for sleep mode */ + + s3c_pm_do_restore_core(exynos4_sleep, ARRAY_SIZE(exynos4_sleep)); + __raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1); + + /* ensure at least INFORM0 has the resume address */ + + __raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0); + + /* Before enter central sequence mode, clock src register have to set */ + + s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc)); + +} + +static int exynos4_pm_add(struct sys_device *sysdev) +{ + pm_cpu_prep = exynos4_pm_prepare; + pm_cpu_sleep = exynos4_cpu_suspend; + + return 0; +} + +/* This function copy from linux/arch/arm/kernel/smp_scu.c */ + +void exynos4_scu_enable(void __iomem *scu_base) +{ + u32 scu_ctrl; + + scu_ctrl = __raw_readl(scu_base); + /* already enabled? */ + if (scu_ctrl & 1) + return; + + scu_ctrl |= 1; + __raw_writel(scu_ctrl, scu_base); + + /* + * Ensure that the data accessed by CPU0 before the SCU was + * initialised is visible to the other CPUs. + */ + flush_cache_all(); +} + +static int exynos4_pm_resume(struct sys_device *dev) +{ + /* For release retention */ + + __raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION); + __raw_writel((1 << 28), S5P_PAD_RET_GPIO_OPTION); + __raw_writel((1 << 28), S5P_PAD_RET_UART_OPTION); + __raw_writel((1 << 28), S5P_PAD_RET_MMCA_OPTION); + __raw_writel((1 << 28), S5P_PAD_RET_MMCB_OPTION); + __raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION); + __raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION); + + s3c_pm_do_restore_core(exynos4_core_save, ARRAY_SIZE(exynos4_core_save)); + + exynos4_scu_enable(S5P_VA_SCU); + +#ifdef CONFIG_CACHE_L2X0 + s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save)); + outer_inv_all(); + /* enable L2X0*/ + writel_relaxed(1, S5P_VA_L2CC + L2X0_CTRL); +#endif + + return 0; +} + +static struct sysdev_driver exynos4_pm_driver = { + .add = exynos4_pm_add, + .resume = exynos4_pm_resume, +}; + +static __init int exynos4_pm_drvinit(void) +{ + unsigned int tmp; + + s3c_pm_init(); + + /* All wakeup disable */ + + tmp = __raw_readl(S5P_WAKEUP_MASK); + tmp |= ((0xFF << 8) | (0x1F << 1)); + __raw_writel(tmp, S5P_WAKEUP_MASK); + + return sysdev_driver_register(&exynos4_sysclass, &exynos4_pm_driver); +} +arch_initcall(exynos4_pm_drvinit); diff --git a/arch/arm/mach-exynos4/setup-fimc.c b/arch/arm/mach-exynos4/setup-fimc.c new file mode 100644 index 00000000000..6a45078d9d1 --- /dev/null +++ b/arch/arm/mach-exynos4/setup-fimc.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * + * Exynos4 camera interface GPIO configuration. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <plat/gpio-cfg.h> +#include <plat/camport.h> + +int exynos4_fimc_setup_gpio(enum s5p_camport_id id) +{ + u32 gpio8, gpio5; + u32 sfn; + int ret; + + switch (id) { + case S5P_CAMPORT_A: + gpio8 = EXYNOS4_GPJ0(0); /* PCLK, VSYNC, HREF, DATA[0:4] */ + gpio5 = EXYNOS4_GPJ1(0); /* DATA[5:7], CLKOUT, FIELD */ + sfn = S3C_GPIO_SFN(2); + break; + + case S5P_CAMPORT_B: + gpio8 = EXYNOS4_GPE0(0); /* DATA[0:7] */ + gpio5 = EXYNOS4_GPE1(0); /* PCLK, VSYNC, HREF, CLKOUT, FIELD */ + sfn = S3C_GPIO_SFN(3); + break; + + default: + WARN(1, "Wrong camport id: %d\n", id); + return -EINVAL; + } + + ret = s3c_gpio_cfgall_range(gpio8, 8, sfn, S3C_GPIO_PULL_UP); + if (ret) + return ret; + + return s3c_gpio_cfgall_range(gpio5, 5, sfn, S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-s5pv310/setup-i2c0.c b/arch/arm/mach-exynos4/setup-i2c0.c index f47f8f3152e..d395bd17c38 100644 --- a/arch/arm/mach-s5pv310/setup-i2c0.c +++ b/arch/arm/mach-exynos4/setup-i2c0.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-s5pv310/setup-i2c0.c + * linux/arch/arm/mach-exynos4/setup-i2c0.c * * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ @@ -21,6 +21,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgall_range(S5PV310_GPD1(0), 2, + s3c_gpio_cfgall_range(EXYNOS4_GPD1(0), 2, S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv310/setup-i2c1.c b/arch/arm/mach-exynos4/setup-i2c1.c index 9d07e4e2f14..fd7235a43f6 100644 --- a/arch/arm/mach-s5pv310/setup-i2c1.c +++ b/arch/arm/mach-exynos4/setup-i2c1.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-s5pv310/setup-i2c1.c + * linux/arch/arm/mach-exynos4/setup-i2c1.c * * Copyright (C) 2010 Samsung Electronics Co., Ltd. * @@ -18,6 +18,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c1_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgall_range(S5PV310_GPD1(2), 2, + s3c_gpio_cfgall_range(EXYNOS4_GPD1(2), 2, S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv310/setup-i2c2.c b/arch/arm/mach-exynos4/setup-i2c2.c index 4163b1233da..2694b19e8b3 100644 --- a/arch/arm/mach-s5pv310/setup-i2c2.c +++ b/arch/arm/mach-exynos4/setup-i2c2.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-s5pv310/setup-i2c2.c + * linux/arch/arm/mach-exynos4/setup-i2c2.c * * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. * @@ -18,6 +18,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c2_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgall_range(S5PV310_GPA0(6), 2, + s3c_gpio_cfgall_range(EXYNOS4_GPA0(6), 2, S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv310/setup-i2c3.c b/arch/arm/mach-exynos4/setup-i2c3.c index 180f153d2a2..379bd306993 100644 --- a/arch/arm/mach-s5pv310/setup-i2c3.c +++ b/arch/arm/mach-exynos4/setup-i2c3.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-s5pv310/setup-i2c3.c + * linux/arch/arm/mach-exynos4/setup-i2c3.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * @@ -18,6 +18,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c3_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgall_range(S5PV310_GPA1(2), 2, + s3c_gpio_cfgall_range(EXYNOS4_GPA1(2), 2, S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv310/setup-i2c4.c b/arch/arm/mach-exynos4/setup-i2c4.c index 909e8dfc531..9f3c04855b7 100644 --- a/arch/arm/mach-s5pv310/setup-i2c4.c +++ b/arch/arm/mach-exynos4/setup-i2c4.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-s5pv310/setup-i2c4.c + * linux/arch/arm/mach-exynos4/setup-i2c4.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * @@ -18,6 +18,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c4_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgall_range(S5PV310_GPB(2), 2, + s3c_gpio_cfgall_range(EXYNOS4_GPB(2), 2, S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv310/setup-i2c5.c b/arch/arm/mach-exynos4/setup-i2c5.c index 5d0fa4ac028..77e1a1e57c7 100644 --- a/arch/arm/mach-s5pv310/setup-i2c5.c +++ b/arch/arm/mach-exynos4/setup-i2c5.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-s5pv310/setup-i2c5.c + * linux/arch/arm/mach-exynos4/setup-i2c5.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * @@ -18,6 +18,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c5_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgall_range(S5PV310_GPB(6), 2, + s3c_gpio_cfgall_range(EXYNOS4_GPB(6), 2, S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv310/setup-i2c6.c b/arch/arm/mach-exynos4/setup-i2c6.c index 34aafab92ac..284d12b7af0 100644 --- a/arch/arm/mach-s5pv310/setup-i2c6.c +++ b/arch/arm/mach-exynos4/setup-i2c6.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-s5pv310/setup-i2c6.c + * linux/arch/arm/mach-exynos4/setup-i2c6.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * @@ -18,6 +18,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c6_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgall_range(S5PV310_GPC1(3), 2, + s3c_gpio_cfgall_range(EXYNOS4_GPC1(3), 2, S3C_GPIO_SFN(4), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv310/setup-i2c7.c b/arch/arm/mach-exynos4/setup-i2c7.c index 9b25b8d1892..b7611ee359a 100644 --- a/arch/arm/mach-s5pv310/setup-i2c7.c +++ b/arch/arm/mach-exynos4/setup-i2c7.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-s5pv310/setup-i2c7.c + * linux/arch/arm/mach-exynos4/setup-i2c7.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * @@ -18,6 +18,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c7_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgall_range(S5PV310_GPD0(2), 2, + s3c_gpio_cfgall_range(EXYNOS4_GPD0(2), 2, S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-exynos4/setup-keypad.c b/arch/arm/mach-exynos4/setup-keypad.c new file mode 100644 index 00000000000..1ee0ebff111 --- /dev/null +++ b/arch/arm/mach-exynos4/setup-keypad.c @@ -0,0 +1,35 @@ +/* linux/arch/arm/mach-exynos4/setup-keypad.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * GPIO configuration for Exynos4 KeyPad device + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/gpio.h> +#include <plat/gpio-cfg.h> + +void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) +{ + /* Keypads can be of various combinations, Just making sure */ + + if (rows > 8) { + /* Set all the necessary GPX2 pins: KP_ROW[0~7] */ + s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3)); + + /* Set all the necessary GPX3 pins: KP_ROW[8~] */ + s3c_gpio_cfgrange_nopull(EXYNOS4_GPX3(0), (rows - 8), + S3C_GPIO_SFN(3)); + } else { + /* Set all the necessary GPX2 pins: KP_ROW[x] */ + s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), rows, + S3C_GPIO_SFN(3)); + } + + /* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */ + s3c_gpio_cfgrange_nopull(EXYNOS4_GPX1(0), cols, S3C_GPIO_SFN(3)); +} diff --git a/arch/arm/mach-s5pv310/setup-sdhci-gpio.c b/arch/arm/mach-exynos4/setup-sdhci-gpio.c index 86d38cc4913..1b3d3a2de95 100644 --- a/arch/arm/mach-s5pv310/setup-sdhci-gpio.c +++ b/arch/arm/mach-exynos4/setup-sdhci-gpio.c @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/setup-sdhci-gpio.c +/* linux/arch/arm/mach-exynos4/setup-sdhci-gpio.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5PV310 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) + * EXYNOS4 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -23,13 +23,13 @@ #include <plat/regs-sdhci.h> #include <plat/sdhci.h> -void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) +void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) { struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; unsigned int gpio; /* Set all the necessary GPK0[0:1] pins to special-function 2 */ - for (gpio = S5PV310_GPK0(0); gpio < S5PV310_GPK0(2); gpio++) { + for (gpio = EXYNOS4_GPK0(0); gpio < EXYNOS4_GPK0(2); gpio++) { s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); @@ -37,14 +37,14 @@ void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) switch (width) { case 8: - for (gpio = S5PV310_GPK1(3); gpio <= S5PV310_GPK1(6); gpio++) { + for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) { /* Data pin GPK1[3:6] to special-funtion 3 */ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); } case 4: - for (gpio = S5PV310_GPK0(3); gpio <= S5PV310_GPK0(6); gpio++) { + for (gpio = EXYNOS4_GPK0(3); gpio <= EXYNOS4_GPK0(6); gpio++) { /* Data pin GPK0[3:6] to special-funtion 2 */ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); @@ -55,25 +55,25 @@ void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) } if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_cfgpin(S5PV310_GPK0(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV310_GPK0(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(EXYNOS4_GPK0(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(EXYNOS4_GPK0(2), S3C_GPIO_PULL_UP); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); } } -void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) +void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) { struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; unsigned int gpio; /* Set all the necessary GPK1[0:1] pins to special-function 2 */ - for (gpio = S5PV310_GPK1(0); gpio < S5PV310_GPK1(2); gpio++) { + for (gpio = EXYNOS4_GPK1(0); gpio < EXYNOS4_GPK1(2); gpio++) { s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); } - for (gpio = S5PV310_GPK1(3); gpio <= S5PV310_GPK1(6); gpio++) { + for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) { /* Data pin GPK1[3:6] to special-function 2 */ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); @@ -81,19 +81,19 @@ void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) } if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_cfgpin(S5PV310_GPK1(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV310_GPK1(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(EXYNOS4_GPK1(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(EXYNOS4_GPK1(2), S3C_GPIO_PULL_UP); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); } } -void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) +void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) { struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; unsigned int gpio; /* Set all the necessary GPK2[0:1] pins to special-function 2 */ - for (gpio = S5PV310_GPK2(0); gpio < S5PV310_GPK2(2); gpio++) { + for (gpio = EXYNOS4_GPK2(0); gpio < EXYNOS4_GPK2(2); gpio++) { s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); @@ -101,14 +101,14 @@ void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) switch (width) { case 8: - for (gpio = S5PV310_GPK3(3); gpio <= S5PV310_GPK3(6); gpio++) { + for (gpio = EXYNOS4_GPK3(3); gpio <= EXYNOS4_GPK3(6); gpio++) { /* Data pin GPK3[3:6] to special-function 3 */ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); } case 4: - for (gpio = S5PV310_GPK2(3); gpio <= S5PV310_GPK2(6); gpio++) { + for (gpio = EXYNOS4_GPK2(3); gpio <= EXYNOS4_GPK2(6); gpio++) { /* Data pin GPK2[3:6] to special-function 2 */ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); @@ -119,25 +119,25 @@ void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) } if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_cfgpin(S5PV310_GPK2(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV310_GPK2(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(EXYNOS4_GPK2(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(EXYNOS4_GPK2(2), S3C_GPIO_PULL_UP); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); } } -void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width) +void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width) { struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; unsigned int gpio; /* Set all the necessary GPK3[0:1] pins to special-function 2 */ - for (gpio = S5PV310_GPK3(0); gpio < S5PV310_GPK3(2); gpio++) { + for (gpio = EXYNOS4_GPK3(0); gpio < EXYNOS4_GPK3(2); gpio++) { s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); } - for (gpio = S5PV310_GPK3(3); gpio <= S5PV310_GPK3(6); gpio++) { + for (gpio = EXYNOS4_GPK3(3); gpio <= EXYNOS4_GPK3(6); gpio++) { /* Data pin GPK3[3:6] to special-function 2 */ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); @@ -145,8 +145,8 @@ void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width) } if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_cfgpin(S5PV310_GPK3(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV310_GPK3(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(EXYNOS4_GPK3(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(EXYNOS4_GPK3(2), S3C_GPIO_PULL_UP); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); } } diff --git a/arch/arm/mach-s5pv310/setup-sdhci.c b/arch/arm/mach-exynos4/setup-sdhci.c index db8358fc466..85f9433d483 100644 --- a/arch/arm/mach-s5pv310/setup-sdhci.c +++ b/arch/arm/mach-exynos4/setup-sdhci.c @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/setup-sdhci.c +/* linux/arch/arm/mach-exynos4/setup-sdhci.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5PV310 - Helper functions for settign up SDHCI device(s) (HSMMC) + * EXYNOS4 - Helper functions for settign up SDHCI device(s) (HSMMC) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -23,14 +23,14 @@ /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ -char *s5pv310_hsmmc_clksrcs[4] = { +char *exynos4_hsmmc_clksrcs[4] = { [0] = NULL, [1] = NULL, [2] = "sclk_mmc", /* mmc_bus */ [3] = NULL, }; -void s5pv310_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r, +void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r, struct mmc_ios *ios, struct mmc_card *card) { u32 ctrl2, ctrl3; diff --git a/arch/arm/mach-exynos4/sleep.S b/arch/arm/mach-exynos4/sleep.S new file mode 100644 index 00000000000..6b62425417a --- /dev/null +++ b/arch/arm/mach-exynos4/sleep.S @@ -0,0 +1,76 @@ +/* linux/arch/arm/mach-exynos4/sleep.S + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4210 power Manager (Suspend-To-RAM) support + * Based on S3C2410 sleep code by: + * Ben Dooks, (c) 2004 Simtec Electronics + * + * Based on PXA/SA1100 sleep code by: + * Nicolas Pitre, (c) 2002 Monta Vista Software Inc + * Cliff Brake, (c) 2001 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/memory.h> + + .text + + /* + * s3c_cpu_save + * + * entry: + * r1 = v:p offset + */ + +ENTRY(s3c_cpu_save) + + stmfd sp!, { r3 - r12, lr } + ldr r3, =resume_with_mmu + bl cpu_suspend + + ldr r0, =pm_cpu_sleep + ldr r0, [ r0 ] + mov pc, r0 + +resume_with_mmu: + ldmfd sp!, { r3 - r12, pc } + + .ltorg + + /* + * sleep magic, to allow the bootloader to check for an valid + * image to resume to. Must be the first word before the + * s3c_cpu_resume entry. + */ + + .word 0x2bedf00d + + /* + * s3c_cpu_resume + * + * resume code entry for bootloader to call + * + * we must put this code here in the data segment as we have no + * other way of restoring the stack pointer after sleep, and we + * must not write to the code segment (code is read-only) + */ + +ENTRY(s3c_cpu_resume) + b cpu_resume diff --git a/arch/arm/mach-s5pv310/time.c b/arch/arm/mach-exynos4/time.c index b262d461533..86b9fa0d363 100644 --- a/arch/arm/mach-s5pv310/time.c +++ b/arch/arm/mach-exynos4/time.c @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/time.c +/* linux/arch/arm/mach-exynos4/time.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * S5PV310 (and compatible) HRT support + * EXYNOS4 (and compatible) HRT support * PWM 2/4 is used for this feature * * This program is free software; you can redistribute it and/or modify @@ -33,7 +33,7 @@ static struct clk *tdiv2; static struct clk *tdiv4; static struct clk *timerclk; -static void s5pv310_pwm_stop(unsigned int pwm_id) +static void exynos4_pwm_stop(unsigned int pwm_id) { unsigned long tcon; @@ -52,7 +52,7 @@ static void s5pv310_pwm_stop(unsigned int pwm_id) __raw_writel(tcon, S3C2410_TCON); } -static void s5pv310_pwm_init(unsigned int pwm_id, unsigned long tcnt) +static void exynos4_pwm_init(unsigned int pwm_id, unsigned long tcnt) { unsigned long tcon; @@ -86,7 +86,7 @@ static void s5pv310_pwm_init(unsigned int pwm_id, unsigned long tcnt) } } -static inline void s5pv310_pwm_start(unsigned int pwm_id, bool periodic) +static inline void exynos4_pwm_start(unsigned int pwm_id, bool periodic) { unsigned long tcon; @@ -117,23 +117,23 @@ static inline void s5pv310_pwm_start(unsigned int pwm_id, bool periodic) __raw_writel(tcon, S3C2410_TCON); } -static int s5pv310_pwm_set_next_event(unsigned long cycles, +static int exynos4_pwm_set_next_event(unsigned long cycles, struct clock_event_device *evt) { - s5pv310_pwm_init(2, cycles); - s5pv310_pwm_start(2, 0); + exynos4_pwm_init(2, cycles); + exynos4_pwm_start(2, 0); return 0; } -static void s5pv310_pwm_set_mode(enum clock_event_mode mode, +static void exynos4_pwm_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { - s5pv310_pwm_stop(2); + exynos4_pwm_stop(2); switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - s5pv310_pwm_init(2, clock_count_per_tick); - s5pv310_pwm_start(2, 1); + exynos4_pwm_init(2, clock_count_per_tick); + exynos4_pwm_start(2, 1); break; case CLOCK_EVT_MODE_ONESHOT: break; @@ -149,11 +149,11 @@ static struct clock_event_device pwm_event_device = { .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .rating = 200, .shift = 32, - .set_next_event = s5pv310_pwm_set_next_event, - .set_mode = s5pv310_pwm_set_mode, + .set_next_event = exynos4_pwm_set_next_event, + .set_mode = exynos4_pwm_set_mode, }; -irqreturn_t s5pv310_clock_event_isr(int irq, void *dev_id) +irqreturn_t exynos4_clock_event_isr(int irq, void *dev_id) { struct clock_event_device *evt = &pwm_event_device; @@ -162,13 +162,13 @@ irqreturn_t s5pv310_clock_event_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction s5pv310_clock_event_irq = { +static struct irqaction exynos4_clock_event_irq = { .name = "pwm_timer2_irq", .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = s5pv310_clock_event_isr, + .handler = exynos4_clock_event_isr, }; -static void __init s5pv310_clockevent_init(void) +static void __init exynos4_clockevent_init(void) { unsigned long pclk; unsigned long clock_rate; @@ -198,23 +198,39 @@ static void __init s5pv310_clockevent_init(void) pwm_event_device.cpumask = cpumask_of(0); clockevents_register_device(&pwm_event_device); - setup_irq(IRQ_TIMER2, &s5pv310_clock_event_irq); + setup_irq(IRQ_TIMER2, &exynos4_clock_event_irq); } -static cycle_t s5pv310_pwm4_read(struct clocksource *cs) +static cycle_t exynos4_pwm4_read(struct clocksource *cs) { return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40)); } +static void exynos4_pwm4_resume(struct clocksource *cs) +{ + unsigned long pclk; + + pclk = clk_get_rate(timerclk); + + clk_set_rate(tdiv4, pclk / 2); + clk_set_parent(tin4, tdiv4); + + exynos4_pwm_init(4, ~0); + exynos4_pwm_start(4, 1); +} + struct clocksource pwm_clocksource = { .name = "pwm_timer4", .rating = 250, - .read = s5pv310_pwm4_read, + .read = exynos4_pwm4_read, .mask = CLOCKSOURCE_MASK(32), .flags = CLOCK_SOURCE_IS_CONTINUOUS , +#ifdef CONFIG_PM + .resume = exynos4_pwm4_resume, +#endif }; -static void __init s5pv310_clocksource_init(void) +static void __init exynos4_clocksource_init(void) { unsigned long pclk; unsigned long clock_rate; @@ -226,14 +242,14 @@ static void __init s5pv310_clocksource_init(void) clock_rate = clk_get_rate(tin4); - s5pv310_pwm_init(4, ~0); - s5pv310_pwm_start(4, 1); + exynos4_pwm_init(4, ~0); + exynos4_pwm_start(4, 1); if (clocksource_register_hz(&pwm_clocksource, clock_rate)) panic("%s: can't register clocksource\n", pwm_clocksource.name); } -static void __init s5pv310_timer_resources(void) +static void __init exynos4_timer_resources(void) { struct platform_device tmpdev; @@ -267,17 +283,17 @@ static void __init s5pv310_timer_resources(void) clk_enable(tin4); } -static void __init s5pv310_timer_init(void) +static void __init exynos4_timer_init(void) { #ifdef CONFIG_LOCAL_TIMERS twd_base = S5P_VA_TWD; #endif - s5pv310_timer_resources(); - s5pv310_clockevent_init(); - s5pv310_clocksource_init(); + exynos4_timer_resources(); + exynos4_clockevent_init(); + exynos4_clocksource_init(); } -struct sys_timer s5pv310_timer = { - .init = s5pv310_timer_init, +struct sys_timer exynos4_timer = { + .init = exynos4_timer_init, }; diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 56684b51707..5eec099e0c7 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -100,6 +100,7 @@ config MACH_MX25_3DS select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMXDI_RTC + select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART @@ -238,6 +239,7 @@ config MACH_MX27_3DS select SOC_IMX27 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_EHCI @@ -265,6 +267,7 @@ config MACH_IMX27LITE bool "LogicPD MX27 LITEKIT platform" select SOC_IMX27 select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IMX_SSI help Include support for MX27 LITEKIT platform. This includes specific configurations for the board and its peripherals. @@ -300,4 +303,13 @@ config MACH_MXT_TD60 Include support for i-MXT (aka td60) platform. This includes specific configurations for the module and its peripherals. +config MACH_IMX27IPCAM + bool "IMX27 IPCAM platform" + select SOC_IMX27 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_UART + help + Include support for IMX27 IPCAM platform. This includes specific + configurations for the board and its peripherals. + endif diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 77100bf2615..b85794d2799 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -9,10 +9,10 @@ obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o -obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o +obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o ehci-imx25.o obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o -obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o +obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o ehci-imx27.o # Support for CMOS sensor interface obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o @@ -36,3 +36,4 @@ obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o obj-$(CONFIG_MACH_PCA100) += mach-pca100.o obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o +obj-$(CONFIG_MACH_IMX27IPCAM) += mach-imx27ipcam.o diff --git a/arch/arm/mach-imx/clock-imx1.c b/arch/arm/mach-imx/clock-imx1.c index 3938a563b28..dcc41728fe7 100644 --- a/arch/arm/mach-imx/clock-imx1.c +++ b/arch/arm/mach-imx/clock-imx1.c @@ -592,6 +592,7 @@ static struct clk_lookup lookups[] __initdata = { _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) _REGISTER_CLOCK("imx1-cspi.0", NULL, spi_clk) + _REGISTER_CLOCK("imx1-cspi.1", NULL, spi_clk) _REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) _REGISTER_CLOCK(NULL, "mshc", mshc_clk) diff --git a/arch/arm/mach-imx/clock-imx25.c b/arch/arm/mach-imx/clock-imx25.c index daa0165b677..a65838fc061 100644 --- a/arch/arm/mach-imx/clock-imx25.c +++ b/arch/arm/mach-imx/clock-imx25.c @@ -228,6 +228,7 @@ DEFINE_CLOCK(esdhc1_per_clk, 0, CCM_CGCR0, 3, get_rate_esdhc1, NULL, DEFINE_CLOCK(esdhc2_ahb_clk, 0, CCM_CGCR0, 22, get_rate_esdhc2, NULL, NULL); DEFINE_CLOCK(esdhc2_per_clk, 0, CCM_CGCR0, 4, get_rate_esdhc2, NULL, &esdhc2_ahb_clk); +DEFINE_CLOCK(sdma_ahb_clk, 0, CCM_CGCR0, 26, NULL, NULL, NULL); DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL, NULL, NULL); DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL, NULL, NULL); DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0, 7, NULL, NULL, &lcdc_ahb_clk); @@ -253,6 +254,7 @@ DEFINE_CLOCK(lcdc_clk, 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk); DEFINE_CLOCK(wdt_clk, 0, CCM_CGCR2, 19, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(ssi1_clk, 0, CCM_CGCR2, 11, get_rate_ssi1, NULL, &ssi1_per_clk); DEFINE_CLOCK(ssi2_clk, 1, CCM_CGCR2, 12, get_rate_ssi2, NULL, &ssi2_per_clk); +DEFINE_CLOCK(sdma_clk, 0, CCM_CGCR2, 6, get_rate_ipg, NULL, &sdma_ahb_clk); DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGCR1, 13, get_rate_esdhc1, NULL, &esdhc1_per_clk); DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGCR1, 14, get_rate_esdhc2, NULL, @@ -304,6 +306,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "audmux", audmux_clk) _REGISTER_CLOCK("flexcan.0", NULL, can1_clk) _REGISTER_CLOCK("flexcan.1", NULL, can2_clk) + _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk) }; int __init mx25_clocks_init(void) diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h index 81979486218..da593657ff3 100644 --- a/arch/arm/mach-imx/devices-imx1.h +++ b/arch/arm/mach-imx/devices-imx1.h @@ -9,6 +9,10 @@ #include <mach/mx1.h> #include <mach/devices-common.h> +extern const struct imx_imx_fb_data imx1_imx_fb_data __initconst; +#define imx1_add_imx_fb(pdata) \ + imx_add_imx_fb(&imx1_imx_fb_data, pdata) + extern const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst; #define imx1_add_imx_i2c(pdata) \ imx_add_imx_i2c(&imx1_imx_i2c_data, pdata) @@ -18,3 +22,10 @@ extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst; imx_add_imx_uart_3irq(&imx1_imx_uart_data[id], pdata) #define imx1_add_imx_uart0(pdata) imx1_add_imx_uart(0, pdata) #define imx1_add_imx_uart1(pdata) imx1_add_imx_uart(1, pdata) + +extern const struct imx_spi_imx_data imx1_cspi_data[] __initconst; +#define imx1_add_cspi(id, pdata) \ + imx_add_spi_imx(&imx1_cspi_data[id], pdata) + +#define imx1_add_spi_imx0(pdata) imx1_add_cspi(0, pdata) +#define imx1_add_spi_imx1(pdata) imx1_add_cspi(1, pdata) diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h index bde33caf1b9..b591d72f603 100644 --- a/arch/arm/mach-imx/devices-imx25.h +++ b/arch/arm/mach-imx/devices-imx25.h @@ -81,7 +81,11 @@ imx25_sdhci_esdhc_imx_data[] __initconst; extern const struct imx_spi_imx_data imx25_cspi_data[] __initconst; #define imx25_add_spi_imx(id, pdata) \ - imx_add_spi_imx(&imx25_spi_imx_data[id], pdata) + imx_add_spi_imx(&imx25_cspi_data[id], pdata) #define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata) #define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata) #define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata) + +extern struct imx_mxc_pwm_data imx25_mxc_pwm_data[] __initconst; +#define imx25_add_mxc_pwm(id) \ + imx_add_mxc_pwm(&imx25_mxc_pwm_data[id]) diff --git a/arch/arm/mach-imx/dma-v1.c b/arch/arm/mach-imx/dma-v1.c index e9f1769b49f..236f1495efa 100644 --- a/arch/arm/mach-imx/dma-v1.c +++ b/arch/arm/mach-imx/dma-v1.c @@ -699,7 +699,7 @@ int imx_dma_request(int channel, const char *name) local_irq_restore(flags); return -EBUSY; } - memset(imxdma, 0, sizeof(imxdma)); + memset(imxdma, 0, sizeof(*imxdma)); imxdma->name = name; local_irq_restore(flags); /* request_irq() can block */ diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c new file mode 100644 index 00000000000..865daf0b09e --- /dev/null +++ b/arch/arm/mach-imx/ehci-imx25.c @@ -0,0 +1,80 @@ +/* + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/mxc_ehci.h> + +#define USBCTRL_OTGBASE_OFFSET 0x600 + +#define MX25_OTG_SIC_SHIFT 29 +#define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT) +#define MX25_OTG_PM_BIT (1 << 24) + +#define MX25_H1_SIC_SHIFT 21 +#define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) +#define MX25_H1_PM_BIT (1 << 8) +#define MX25_H1_IPPUE_UP_BIT (1 << 7) +#define MX25_H1_IPPUE_DOWN_BIT (1 << 6) +#define MX25_H1_TLL_BIT (1 << 5) +#define MX25_H1_USBTE_BIT (1 << 4) + +int mx25_initialize_usb_hw(int port, unsigned int flags) +{ + unsigned int v; + + v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); + + switch (port) { + case 0: /* OTG port */ + v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX25_OTG_PM_BIT; + + break; + case 1: /* H1 port */ + v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_TLL_BIT | + MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX25_H1_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX25_H1_TLL_BIT; + + if (flags & MXC_EHCI_INTERNAL_PHY) + v |= MX25_H1_USBTE_BIT; + + if (flags & MXC_EHCI_IPPUE_DOWN) + v |= MX25_H1_IPPUE_DOWN_BIT; + + if (flags & MXC_EHCI_IPPUE_UP) + v |= MX25_H1_IPPUE_UP_BIT; + + break; + default: + return -EINVAL; + } + + writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); + + return 0; +} + diff --git a/arch/arm/mach-imx/ehci-imx27.c b/arch/arm/mach-imx/ehci-imx27.c new file mode 100644 index 00000000000..fa69419eabd --- /dev/null +++ b/arch/arm/mach-imx/ehci-imx27.c @@ -0,0 +1,82 @@ +/* + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/mxc_ehci.h> + +#define USBCTRL_OTGBASE_OFFSET 0x600 + +#define MX27_OTG_SIC_SHIFT 29 +#define MX27_OTG_SIC_MASK (0x3 << MX27_OTG_SIC_SHIFT) +#define MX27_OTG_PM_BIT (1 << 24) + +#define MX27_H2_SIC_SHIFT 21 +#define MX27_H2_SIC_MASK (0x3 << MX27_H2_SIC_SHIFT) +#define MX27_H2_PM_BIT (1 << 16) +#define MX27_H2_DT_BIT (1 << 5) + +#define MX27_H1_SIC_SHIFT 13 +#define MX27_H1_SIC_MASK (0x3 << MX27_H1_SIC_SHIFT) +#define MX27_H1_PM_BIT (1 << 8) +#define MX27_H1_DT_BIT (1 << 4) + +int mx27_initialize_usb_hw(int port, unsigned int flags) +{ + unsigned int v; + + v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); + + switch (port) { + case 0: /* OTG port */ + v &= ~(MX27_OTG_SIC_MASK | MX27_OTG_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_OTG_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX27_OTG_PM_BIT; + break; + case 1: /* H1 port */ + v &= ~(MX27_H1_SIC_MASK | MX27_H1_PM_BIT | MX27_H1_DT_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H1_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX27_H1_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX27_H1_DT_BIT; + + break; + case 2: /* H2 port */ + v &= ~(MX27_H2_SIC_MASK | MX27_H2_PM_BIT | MX27_H2_DT_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H2_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX27_H2_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX27_H2_DT_BIT; + + break; + default: + return -EINVAL; + } + + writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); + + return 0; +} + diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index 275c8589d79..fa5288018ba 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -249,7 +249,7 @@ static const struct imxuart_platform_data uart_pdata __initconst = { #define ADS7846_PENDOWN (GPIO_PORTD | 25) -static void ads7846_dev_init(void) +static void __maybe_unused ads7846_dev_init(void) { if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) { printk(KERN_ERR "can't get ads746 pen down GPIO\n"); @@ -268,7 +268,8 @@ static struct ads7846_platform_data ads7846_config __initdata = { .keep_vref_on = 1, }; -static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = { +static struct spi_board_info __maybe_unused + eukrea_mbimx27_spi_board_info[] __initdata = { [0] = { .modalias = "ads7846", .bus_num = 0, @@ -357,13 +358,11 @@ void __init eukrea_mbimx27_baseboard_init(void) ads7846_dev_init(); #endif -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) /* SPI_CS0 init */ mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data); spi_register_board_info(eukrea_mbimx27_spi_board_info, ARRAY_SIZE(eukrea_mbimx27_spi_board_info)); -#endif /* Leds configuration */ mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT); diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 6cf04da2456..759299bb035 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -209,17 +209,25 @@ static struct platform_device serial_device = { }; #endif -#if defined(CONFIG_USB_ULPI) +static int eukrea_cpuimx27_otg_init(struct platform_device *pdev) +{ + return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} + static struct mxc_usbh_platform_data otg_pdata __initdata = { + .init = eukrea_cpuimx27_otg_init, .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; +static int eukrea_cpuimx27_usbh2_init(struct platform_device *pdev) +{ + return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} + static struct mxc_usbh_platform_data usbh2_pdata __initdata = { + .init = eukrea_cpuimx27_usbh2_init, .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; -#endif static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, @@ -273,21 +281,19 @@ static void __init eukrea_cpuimx27_init(void) platform_device_register(&serial_device); #endif -#if defined(CONFIG_USB_ULPI) if (otg_mode_host) { - otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - - imx27_add_mxc_ehci_otg(&otg_pdata); + otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (otg_pdata.otg) + imx27_add_mxc_ehci_otg(&otg_pdata); + } else { + imx27_add_fsl_usb2_udc(&otg_device_pdata); } - usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - - imx27_add_mxc_ehci_hs(2, &usbh2_pdata); -#endif - if (!otg_mode_host) - imx27_add_fsl_usb2_udc(&otg_device_pdata); + usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (usbh2_pdata.otg) + imx27_add_mxc_ehci_hs(2, &usbh2_pdata); #ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD eukrea_mbimx27_baseboard_init(); @@ -304,9 +310,10 @@ static struct sys_timer eukrea_cpuimx27_timer = { }; MACHINE_START(CPUIMX27, "EUKREA CPUIMX27") - .boot_params = MX27_PHYS_OFFSET + 0x100, - .map_io = mx27_map_io, - .init_irq = mx27_init_irq, - .init_machine = eukrea_cpuimx27_init, - .timer = &eukrea_cpuimx27_timer, + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .timer = &eukrea_cpuimx27_timer, + .init_machine = eukrea_cpuimx27_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index eb395aba923..9da8d18eeb0 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -84,15 +84,25 @@ static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = { }, }; +static int eukrea_cpuimx25_otg_init(struct platform_device *pdev) +{ + return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} + static const struct mxc_usbh_platform_data otg_pdata __initconst = { + .init = eukrea_cpuimx25_otg_init, .portsc = MXC_EHCI_MODE_UTMI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; +static int eukrea_cpuimx25_usbh2_init(struct platform_device *pdev) +{ + return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI | + MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN); +} + static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { + .init = eukrea_cpuimx25_usbh2_init, .portsc = MXC_EHCI_MODE_SERIAL, - .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | - MXC_EHCI_IPPUE_DOWN, }; static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { @@ -153,9 +163,10 @@ static struct sys_timer eukrea_cpuimx25_timer = { MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25") /* Maintainer: Eukrea Electromatique */ - .boot_params = MX25_PHYS_OFFSET + 0x100, - .map_io = mx25_map_io, - .init_irq = mx25_init_irq, - .init_machine = eukrea_cpuimx25_init, - .timer = &eukrea_cpuimx25_timer, + .boot_params = MX25_PHYS_OFFSET + 0x100, + .map_io = mx25_map_io, + .init_early = imx25_init_early, + .init_irq = mx25_init_irq, + .timer = &eukrea_cpuimx25_timer, + .init_machine = eukrea_cpuimx25_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 40a3666ea63..d7e0d219726 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -30,6 +30,7 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/gpio.h> +#include <linux/delay.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> @@ -66,6 +67,11 @@ static const int visstrim_m10_pins[] __initconst = { PD15_AOUT_FEC_COL, PD16_AIN_FEC_TX_ER, PF23_AIN_FEC_TX_EN, + /* SSI1 */ + PC20_PF_SSI1_FS, + PC21_PF_SSI1_RXD, + PC22_PF_SSI1_TXD, + PC23_PF_SSI1_CLK, /* SDHC1 */ PE18_PF_SD1_D0, PE19_PF_SD1_D1, @@ -204,20 +210,30 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = { I2C_BOARD_INFO("pca9555", 0x20), .platform_data = &visstrim_m10_pca9555_pdata, }, + { + I2C_BOARD_INFO("tlv320aic32x4", 0x18), + } }; /* USB OTG */ static int otg_phy_init(struct platform_device *pdev) { gpio_set_value(OTG_PHY_CS_GPIO, 0); - return 0; + + mdelay(10); + + return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); } static const struct mxc_usbh_platform_data visstrim_m10_usbotg_pdata __initconst = { .init = otg_phy_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED, +}; + +/* SSI */ +static const struct imx_ssi_platform_data visstrim_m10_ssi_pdata __initconst = { + .flags = IMX_SSI_DMA | IMX_SSI_SYN, }; static void __init visstrim_m10_board_init(void) @@ -229,6 +245,7 @@ static void __init visstrim_m10_board_init(void) if (ret) pr_err("Failed to setup pins (%d)\n", ret); + imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata); imx27_add_imx_uart0(&uart_pdata); i2c_register_board_info(0, visstrim_m10_i2c_devices, @@ -251,9 +268,10 @@ static struct sys_timer visstrim_m10_timer = { }; MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") - .boot_params = MX27_PHYS_OFFSET + 0x100, - .map_io = mx27_map_io, - .init_irq = mx27_init_irq, - .init_machine = visstrim_m10_board_init, - .timer = &visstrim_m10_timer, + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .timer = &visstrim_m10_timer, + .init_machine = visstrim_m10_board_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c new file mode 100644 index 00000000000..9be6cd6fbf8 --- /dev/null +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/iomux-mx27.h> + +#include "devices-imx27.h" + +static const int mx27ipcam_pins[] __initconst = { + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, +}; + +static void __init mx27ipcam_init(void) +{ + mxc_gpio_setup_multiple_pins(mx27ipcam_pins, ARRAY_SIZE(mx27ipcam_pins), + "mx27ipcam"); + + imx27_add_imx_uart0(NULL); + imx27_add_fec(NULL); + imx27_add_imx2_wdt(NULL); +} + +static void __init mx27ipcam_timer_init(void) +{ + mx27_clocks_init(25000000); +} + +static struct sys_timer mx27ipcam_timer = { + .init = mx27ipcam_timer_init, +}; + +MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM") + /* maintainer: Freescale Semiconductor, Inc. */ + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .timer = &mx27ipcam_timer, + .init_machine = mx27ipcam_init, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index 3a1202e4721..841140516ed 100644 --- a/arch/arm/mach-imx/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -75,9 +75,10 @@ static struct sys_timer mx27lite_timer = { }; MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE") - .boot_params = MX27_PHYS_OFFSET + 0x100, - .map_io = mx27_map_io, - .init_irq = mx27_init_irq, - .init_machine = mx27lite_init, - .timer = &mx27lite_timer, + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .timer = &mx27lite_timer, + .init_machine = mx27lite_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 1f446e5eb63..47cf56ac6d5 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -144,17 +144,19 @@ struct sys_timer mx1ads_timer = { MACHINE_START(MX1ADS, "Freescale MX1ADS") /* Maintainer: Sascha Hauer, Pengutronix */ - .boot_params = MX1_PHYS_OFFSET + 0x100, - .map_io = mx1_map_io, - .init_irq = mx1_init_irq, - .timer = &mx1ads_timer, - .init_machine = mx1ads_init, + .boot_params = MX1_PHYS_OFFSET + 0x100, + .map_io = mx1_map_io, + .init_early = imx1_init_early, + .init_irq = mx1_init_irq, + .timer = &mx1ads_timer, + .init_machine = mx1ads_init, MACHINE_END MACHINE_START(MXLADS, "Freescale MXLADS") - .boot_params = MX1_PHYS_OFFSET + 0x100, - .map_io = mx1_map_io, - .init_irq = mx1_init_irq, - .timer = &mx1ads_timer, - .init_machine = mx1ads_init, + .boot_params = MX1_PHYS_OFFSET + 0x100, + .map_io = mx1_map_io, + .init_early = imx1_init_early, + .init_irq = mx1_init_irq, + .timer = &mx1ads_timer, + .init_machine = mx1ads_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 0a372577c2a..fa52a1086ea 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -304,9 +304,10 @@ static struct sys_timer mx21ads_timer = { MACHINE_START(MX21ADS, "Freescale i.MX21ADS") /* maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX21_PHYS_OFFSET + 0x100, - .map_io = mx21ads_map_io, - .init_irq = mx21_init_irq, - .init_machine = mx21ads_board_init, - .timer = &mx21ads_timer, + .boot_params = MX21_PHYS_OFFSET + 0x100, + .map_io = mx21ads_map_io, + .init_early = imx21_init_early, + .init_irq = mx21_init_irq, + .timer = &mx21ads_timer, + .init_machine = mx21ads_board_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index 8382e790207..06da438282a 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -103,14 +103,18 @@ static iomux_v3_cfg_t mx25pdk_pads[] = { MX25_PAD_SD1_DATA1__SD1_DATA1, MX25_PAD_SD1_DATA2__SD1_DATA2, MX25_PAD_SD1_DATA3__SD1_DATA3, + + /* I2C1 */ + MX25_PAD_I2C1_CLK__I2C1_CLK, + MX25_PAD_I2C1_DAT__I2C1_DAT, }; static const struct fec_platform_data mx25_fec_pdata __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; -#define FEC_ENABLE_GPIO 35 -#define FEC_RESET_B_GPIO 104 +#define FEC_ENABLE_GPIO IMX_GPIO_NR(2, 3) +#define FEC_RESET_B_GPIO IMX_GPIO_NR(4, 8) static void __init mx25pdk_fec_reset(void) { @@ -185,9 +189,14 @@ static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = { .keymap_size = ARRAY_SIZE(mx25pdk_keymap), }; +static int mx25pdk_usbh2_init(struct platform_device *pdev) +{ + return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY); +} + static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { + .init = mx25pdk_usbh2_init, .portsc = MXC_EHCI_MODE_SERIAL, - .flags = MXC_EHCI_INTERNAL_PHY, }; static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { @@ -195,6 +204,10 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .phy_mode = FSL_USB2_PHY_UTMI, }; +static const struct imxi2c_platform_data mx25_3ds_i2c0_data __initconst = { + .bitrate = 100000, +}; + static void __init mx25pdk_init(void) { mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads, @@ -213,6 +226,7 @@ static void __init mx25pdk_init(void) imx25_add_imx_keypad(&mx25pdk_keymap_data); imx25_add_sdhci_esdhc_imx(0, NULL); + imx25_add_imx_i2c0(&mx25_3ds_i2c0_data); } static void __init mx25pdk_timer_init(void) @@ -226,10 +240,10 @@ static struct sys_timer mx25pdk_timer = { MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX25_PHYS_OFFSET + 0x100, - .map_io = mx25_map_io, - .init_irq = mx25_init_irq, - .init_machine = mx25pdk_init, - .timer = &mx25pdk_timer, + .boot_params = MX25_PHYS_OFFSET + 0x100, + .map_io = mx25_map_io, + .init_early = imx25_init_early, + .init_irq = mx25_init_irq, + .timer = &mx25pdk_timer, + .init_machine = mx25pdk_init, MACHINE_END - diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 164331518bd..614b3c00c4a 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -98,6 +98,9 @@ static const int mx27pdk_pins[] __initconst = { PD22_PF_CSPI2_SCLK, PD23_PF_CSPI2_MISO, PD24_PF_CSPI2_MOSI, + /* I2C1 */ + PD17_PF_I2C_DATA, + PD18_PF_I2C_CLK, }; static const struct imxuart_platform_data uart_pdata __initconst = { @@ -159,13 +162,15 @@ static int otg_phy_init(void) return 0; } -#if defined(CONFIG_USB_ULPI) +static int mx27_3ds_otg_init(struct platform_device *pdev) +{ + return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} static struct mxc_usbh_platform_data otg_pdata __initdata = { + .init = mx27_3ds_otg_init, .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; -#endif static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, @@ -216,7 +221,7 @@ static struct regulator_init_data vgen_init = { .consumer_supplies = vgen_consumers, }; -static struct mc13783_regulator_init_data mx27_3ds_regulators[] = { +static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = { { .id = MC13783_REG_VMMC1, .init_data = &vmmc1_init, @@ -227,10 +232,10 @@ static struct mc13783_regulator_init_data mx27_3ds_regulators[] = { }; /* MC13783 */ -static struct mc13783_platform_data mc13783_pdata __initdata = { +static struct mc13xxx_platform_data mc13783_pdata __initdata = { .regulators = mx27_3ds_regulators, .num_regulators = ARRAY_SIZE(mx27_3ds_regulators), - .flags = MC13783_USE_REGULATOR, + .flags = MC13XXX_USE_REGULATOR, }; /* SPI */ @@ -253,6 +258,9 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { }, }; +static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = { + .bitrate = 100000, +}; static void __init mx27pdk_init(void) { @@ -265,14 +273,15 @@ static void __init mx27pdk_init(void) imx27_add_mxc_mmc(0, &sdhc1_pdata); imx27_add_imx2_wdt(NULL); otg_phy_init(); -#if defined(CONFIG_USB_ULPI) + if (otg_mode_host) { - otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); + otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); - imx27_add_mxc_ehci_otg(&otg_pdata); + if (otg_pdata.otg) + imx27_add_mxc_ehci_otg(&otg_pdata); } -#endif + if (!otg_mode_host) imx27_add_fsl_usb2_udc(&otg_device_pdata); @@ -282,6 +291,7 @@ static void __init mx27pdk_init(void) if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT)) pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n"); + imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data); } static void __init mx27pdk_timer_init(void) @@ -295,9 +305,10 @@ static struct sys_timer mx27pdk_timer = { MACHINE_START(MX27_3DS, "Freescale MX27PDK") /* maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX27_PHYS_OFFSET + 0x100, - .map_io = mx27_map_io, - .init_irq = mx27_init_irq, - .init_machine = mx27pdk_init, - .timer = &mx27pdk_timer, + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .timer = &mx27pdk_timer, + .init_machine = mx27pdk_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index b832f960fec..367d1e4384c 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -344,9 +344,10 @@ static void __init mx27ads_map_io(void) MACHINE_START(MX27ADS, "Freescale i.MX27ADS") /* maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX27_PHYS_OFFSET + 0x100, - .map_io = mx27ads_map_io, - .init_irq = mx27_init_irq, - .init_machine = mx27ads_board_init, - .timer = &mx27ads_timer, + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27ads_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .timer = &mx27ads_timer, + .init_machine = mx27ads_board_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index 4ce71b0401d..69787c30c32 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -266,10 +266,10 @@ static struct sys_timer mxt_td60_timer = { MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60") /* maintainer: Maxtrack Industrial */ - .boot_params = MX27_PHYS_OFFSET + 0x100, - .map_io = mx27_map_io, - .init_irq = mx27_init_irq, - .init_machine = mxt_td60_board_init, - .timer = &mxt_td60_timer, + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .timer = &mxt_td60_timer, + .init_machine = mxt_td60_board_init, MACHINE_END - diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index cccc0a0a9c7..63e18255677 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -187,7 +187,6 @@ static struct i2c_board_info pca100_i2c_devices[] = { } }; -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) static struct spi_eeprom at25320 = { .name = "at25320an", .byte_len = 4096, @@ -211,7 +210,6 @@ static const struct spi_imx_master pca100_spi0_data __initconst = { .chipselect = pca100_spi_cs, .num_chipselect = ARRAY_SIZE(pca100_spi_cs), }; -#endif static void pca100_ac97_warm_reset(struct snd_ac97 *ac97) { @@ -269,31 +267,33 @@ static const struct imxmmc_platform_data sdhc_pdata __initconst = { .exit = pca100_sdhc2_exit, }; -#if defined(CONFIG_USB_ULPI) static int otg_phy_init(struct platform_device *pdev) { gpio_set_value(OTG_PHY_CS_GPIO, 0); - return 0; + + mdelay(10); + + return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); } static struct mxc_usbh_platform_data otg_pdata __initdata = { .init = otg_phy_init, .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; static int usbh2_phy_init(struct platform_device *pdev) { gpio_set_value(USBH2_PHY_CS_GPIO, 0); - return 0; + + mdelay(10); + + return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); } static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .init = usbh2_phy_init, .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; -#endif static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, @@ -389,36 +389,33 @@ static void __init pca100_init(void) imx27_add_imx_i2c(1, &pca100_i2c1_data); -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN); mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN); spi_register_board_info(pca100_spi_board_info, ARRAY_SIZE(pca100_spi_board_info)); imx27_add_spi_imx0(&pca100_spi0_data); -#endif gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs"); gpio_direction_output(OTG_PHY_CS_GPIO, 1); gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs"); gpio_direction_output(USBH2_PHY_CS_GPIO, 1); -#if defined(CONFIG_USB_ULPI) if (otg_mode_host) { - otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); + otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); - imx27_add_mxc_ehci_otg(&otg_pdata); + if (otg_pdata.otg) + imx27_add_mxc_ehci_otg(&otg_pdata); + } else { + gpio_set_value(OTG_PHY_CS_GPIO, 0); + imx27_add_fsl_usb2_udc(&otg_device_pdata); } usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - imx27_add_mxc_ehci_hs(2, &usbh2_pdata); -#endif - if (!otg_mode_host) { - gpio_set_value(OTG_PHY_CS_GPIO, 0); - imx27_add_fsl_usb2_udc(&otg_device_pdata); - } + if (usbh2_pdata.otg) + imx27_add_mxc_ehci_hs(2, &usbh2_pdata); imx27_add_imx_fb(&pca100_fb_data); @@ -437,10 +434,10 @@ static struct sys_timer pca100_timer = { }; MACHINE_START(PCA100, "phyCARD-i.MX27") - .boot_params = MX27_PHYS_OFFSET + 0x100, - .map_io = mx27_map_io, - .init_irq = mx27_init_irq, - .init_machine = pca100_init, - .timer = &pca100_timer, + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .init_machine = pca100_init, + .timer = &pca100_timer, MACHINE_END - diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 505614803bc..38c77084b61 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -252,7 +252,7 @@ static struct regulator_init_data cam_data = { .consumer_supplies = cam_consumers, }; -static struct mc13783_regulator_init_data pcm038_regulators[] = { +static struct mc13xxx_regulator_init_data pcm038_regulators[] = { { .id = MC13783_REG_VCAM, .init_data = &cam_data, @@ -262,11 +262,11 @@ static struct mc13783_regulator_init_data pcm038_regulators[] = { }, }; -static struct mc13783_platform_data pcm038_pmic = { +static struct mc13xxx_platform_data pcm038_pmic = { .regulators = pcm038_regulators, .num_regulators = ARRAY_SIZE(pcm038_regulators), - .flags = MC13783_USE_ADC | MC13783_USE_REGULATOR | - MC13783_USE_TOUCHSCREEN, + .flags = MC13XXX_USE_ADC | MC13XXX_USE_REGULATOR | + MC13XXX_USE_TOUCHSCREEN, }; static struct spi_board_info pcm038_spi_board_info[] __initdata = { @@ -281,9 +281,15 @@ static struct spi_board_info pcm038_spi_board_info[] __initdata = { } }; +static int pcm038_usbh2_init(struct platform_device *pdev) +{ + return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_INTERFACE_DIFF_UNI); +} + static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { + .init = pcm038_usbh2_init, .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, }; static void __init pcm038_init(void) @@ -340,9 +346,10 @@ static struct sys_timer pcm038_timer = { }; MACHINE_START(PCM038, "phyCORE-i.MX27") - .boot_params = MX27_PHYS_OFFSET + 0x100, - .map_io = mx27_map_io, - .init_irq = mx27_init_irq, - .init_machine = pcm038_init, - .timer = &pcm038_timer, + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .timer = &pcm038_timer, + .init_machine = pcm038_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index eae878f306c..dcaee043628 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -145,10 +145,11 @@ static struct sys_timer scb9328_timer = { }; MACHINE_START(SCB9328, "Synertronixx scb9328") - /* Sascha Hauer */ - .boot_params = 0x08000100, - .map_io = mx1_map_io, - .init_irq = mx1_init_irq, - .timer = &scb9328_timer, - .init_machine = scb9328_init, + /* Sascha Hauer */ + .boot_params = 0x08000100, + .map_io = mx1_map_io, + .init_early = imx1_init_early, + .init_irq = mx1_init_irq, + .timer = &scb9328_timer, + .init_machine = scb9328_init, MACHINE_END diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c index 729ae0915af..2e482ba5a0e 100644 --- a/arch/arm/mach-imx/mm-imx1.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -23,6 +23,9 @@ #include <mach/common.h> #include <mach/hardware.h> +#include <mach/gpio.h> +#include <mach/irqs.h> +#include <mach/iomux-v1.h> static struct map_desc imx_io_desc[] __initdata = { imx_map_entry(MX1, IO, MT_DEVICE), @@ -30,16 +33,26 @@ static struct map_desc imx_io_desc[] __initdata = { void __init mx1_map_io(void) { + iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc)); +} + +void __init imx1_init_early(void) +{ mxc_set_cpu_type(MXC_CPU_MX1); mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR)); - - iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc)); + imx_iomuxv1_init(MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR), + MX1_NUM_GPIO_PORT); } -int imx1_register_gpios(void); +static struct mxc_gpio_port imx1_gpio_ports[] = { + DEFINE_IMX_GPIO_PORT_IRQ(MX1, 0, 1, MX1_GPIO_INT_PORTA), + DEFINE_IMX_GPIO_PORT_IRQ(MX1, 1, 2, MX1_GPIO_INT_PORTB), + DEFINE_IMX_GPIO_PORT_IRQ(MX1, 2, 3, MX1_GPIO_INT_PORTC), + DEFINE_IMX_GPIO_PORT_IRQ(MX1, 3, 4, MX1_GPIO_INT_PORTD), +}; void __init mx1_init_irq(void) { mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR)); - imx1_register_gpios(); + mxc_gpio_init(imx1_gpio_ports, ARRAY_SIZE(imx1_gpio_ports)); } diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index e728af81d1b..7a0c500ac2c 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -24,6 +24,9 @@ #include <mach/common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> +#include <mach/gpio.h> +#include <mach/irqs.h> +#include <mach/iomux-v1.h> /* MX21 memory map definition */ static struct map_desc imx21_io_desc[] __initdata = { @@ -56,16 +59,28 @@ static struct map_desc imx21_io_desc[] __initdata = { */ void __init mx21_map_io(void) { + iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc)); +} + +void __init imx21_init_early(void) +{ mxc_set_cpu_type(MXC_CPU_MX21); mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR)); - - iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc)); + imx_iomuxv1_init(MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR), + MX21_NUM_GPIO_PORT); } -int imx21_register_gpios(void); +static struct mxc_gpio_port imx21_gpio_ports[] = { + DEFINE_IMX_GPIO_PORT_IRQ(MX21, 0, 1, MX21_INT_GPIO), + DEFINE_IMX_GPIO_PORT(MX21, 1, 2), + DEFINE_IMX_GPIO_PORT(MX21, 2, 3), + DEFINE_IMX_GPIO_PORT(MX21, 3, 4), + DEFINE_IMX_GPIO_PORT(MX21, 4, 5), + DEFINE_IMX_GPIO_PORT(MX21, 5, 6), +}; void __init mx21_init_irq(void) { mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR)); - imx21_register_gpios(); + mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports)); } diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index 2edec6ce8fe..02f7b5c7fa8 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -27,6 +27,8 @@ #include <mach/hardware.h> #include <mach/mx25.h> #include <mach/iomux-v3.h> +#include <mach/gpio.h> +#include <mach/irqs.h> /* * This table defines static virtual address mappings for I/O regions. @@ -45,18 +47,26 @@ static struct map_desc mx25_io_desc[] __initdata = { */ void __init mx25_map_io(void) { + iotable_init(mx25_io_desc, ARRAY_SIZE(mx25_io_desc)); +} + +void __init imx25_init_early(void) +{ mxc_set_cpu_type(MXC_CPU_MX25); mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR)); - - iotable_init(mx25_io_desc, ARRAY_SIZE(mx25_io_desc)); } -int imx25_register_gpios(void); +static struct mxc_gpio_port imx25_gpio_ports[] = { + DEFINE_IMX_GPIO_PORT_IRQ(MX25, 0, 1, MX25_INT_GPIO1), + DEFINE_IMX_GPIO_PORT_IRQ(MX25, 1, 2, MX25_INT_GPIO2), + DEFINE_IMX_GPIO_PORT_IRQ(MX25, 2, 3, MX25_INT_GPIO3), + DEFINE_IMX_GPIO_PORT_IRQ(MX25, 3, 4, MX25_INT_GPIO4), +}; void __init mx25_init_irq(void) { mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR)); - imx25_register_gpios(); + mxc_gpio_init(imx25_gpio_ports, ARRAY_SIZE(imx25_gpio_ports)); } diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index 374e48b7a41..a6761a39f08 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -24,6 +24,9 @@ #include <mach/common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> +#include <mach/gpio.h> +#include <mach/irqs.h> +#include <mach/iomux-v1.h> /* MX27 memory map definition */ static struct map_desc imx27_io_desc[] __initdata = { @@ -56,16 +59,28 @@ static struct map_desc imx27_io_desc[] __initdata = { */ void __init mx27_map_io(void) { + iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc)); +} + +void __init imx27_init_early(void) +{ mxc_set_cpu_type(MXC_CPU_MX27); mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR)); - - iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc)); + imx_iomuxv1_init(MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR), + MX27_NUM_GPIO_PORT); } -int imx27_register_gpios(void); +static struct mxc_gpio_port imx27_gpio_ports[] = { + DEFINE_IMX_GPIO_PORT_IRQ(MX27, 0, 1, MX27_INT_GPIO), + DEFINE_IMX_GPIO_PORT(MX27, 1, 2), + DEFINE_IMX_GPIO_PORT(MX27, 2, 3), + DEFINE_IMX_GPIO_PORT(MX27, 3, 4), + DEFINE_IMX_GPIO_PORT(MX27, 4, 5), + DEFINE_IMX_GPIO_PORT(MX27, 5, 6), +}; void __init mx27_init_irq(void) { mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR)); - imx27_register_gpios(); + mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports)); } diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 3688123b5ad..20e71df3e3b 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -21,6 +21,7 @@ #include <net/dsa.h> #include <asm/page.h> #include <asm/timex.h> +#include <asm/kexec.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <mach/kirkwood.h> @@ -846,9 +847,14 @@ static void __init kirkwood_wdt_init(void) /***************************************************************************** * Time handling ****************************************************************************/ +void __init kirkwood_init_early(void) +{ + orion_time_set_base(TIMER_VIRT_BASE); +} + int kirkwood_tclk; -int __init kirkwood_find_tclk(void) +static int __init kirkwood_find_tclk(void) { u32 dev, rev; @@ -864,7 +870,9 @@ int __init kirkwood_find_tclk(void) static void __init kirkwood_timer_init(void) { kirkwood_tclk = kirkwood_find_tclk(); - orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); + + orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, + IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); } struct sys_timer kirkwood_timer = { @@ -1003,6 +1011,10 @@ void __init kirkwood_init(void) kirkwood_xor0_init(); kirkwood_xor1_init(); kirkwood_crypto_init(); + +#ifdef CONFIG_KEXEC + kexec_reinit = kirkwood_enable_pcie; +#endif } static int __init kirkwood_clock_gate(void) diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 95bb0a73adf..b9b0f0968a3 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -27,11 +27,13 @@ struct kirkwood_asoc_platform_data; */ void kirkwood_map_io(void); void kirkwood_init(void); +void kirkwood_init_early(void); void kirkwood_init_irq(void); extern struct mbus_dram_target_info kirkwood_mbus_dram_info; void kirkwood_setup_cpu_mbus(void); +void kirkwood_enable_pcie(void); void kirkwood_pcie_id(u32 *dev, u32 *rev); void kirkwood_ehci_init(void); diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c index a31c9499ab3..043cfd5e140 100644 --- a/arch/arm/mach-kirkwood/d2net_v2-setup.c +++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c @@ -224,6 +224,7 @@ MACHINE_START(D2NET_V2, "LaCie d2 Network v2") .boot_params = 0x00000100, .init_machine = d2net_v2_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c index 9ea71182d31..bff04e04d67 100644 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c @@ -100,6 +100,7 @@ MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board") .boot_params = 0x00000100, .init_machine = db88f6281_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c index 433ea368c06..f14dfb8508c 100644 --- a/arch/arm/mach-kirkwood/dockstar-setup.c +++ b/arch/arm/mach-kirkwood/dockstar-setup.c @@ -105,6 +105,7 @@ MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar") .boot_params = 0x00000100, .init_machine = dockstar_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c index 8f47dc0a2fe..41d1b40696a 100644 --- a/arch/arm/mach-kirkwood/guruplug-setup.c +++ b/arch/arm/mach-kirkwood/guruplug-setup.c @@ -124,6 +124,7 @@ MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board") .boot_params = 0x00000100, .init_machine = guruplug_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index aff0e1327e3..957bd7997d7 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -29,9 +29,6 @@ #define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) #define WDT_INT_REQ 0x0008 -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 #define BRIDGE_INT_TIMER1_CLR (~0x0004) #define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) diff --git a/arch/arm/mach-kirkwood/include/mach/gpio.h b/arch/arm/mach-kirkwood/include/mach/gpio.h index 81b335eb62e..84f340b546c 100644 --- a/arch/arm/mach-kirkwood/include/mach/gpio.h +++ b/arch/arm/mach-kirkwood/include/mach/gpio.h @@ -6,33 +6,4 @@ * warranty of any kind, whether express or implied. */ -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -#include <mach/irqs.h> #include <plat/gpio.h> -#include <asm-generic/gpio.h> /* cansleep wrappers */ - -#define GPIO_MAX 50 -#define GPIO_OFF(pin) (((pin) >> 5) ? 0x0140 : 0x0100) -#define GPIO_OUT(pin) (DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x00) -#define GPIO_IO_CONF(pin) (DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x04) -#define GPIO_BLINK_EN(pin) (DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x08) -#define GPIO_IN_POL(pin) (DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x0c) -#define GPIO_DATA_IN(pin) (DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x10) -#define GPIO_EDGE_CAUSE(pin) (DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x14) -#define GPIO_EDGE_MASK(pin) (DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x18) -#define GPIO_LEVEL_MASK(pin) (DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x1c) - -static inline int gpio_to_irq(int pin) -{ - return pin + IRQ_KIRKWOOD_GPIO_START; -} - -static inline int irq_to_gpio(int irq) -{ - return irq - IRQ_KIRKWOOD_GPIO_START; -} - - -#endif diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index 6e924b39891..010bdeb4ac5 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -69,6 +69,8 @@ #define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000) #define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE | 0x0030) #define DEVICE_ID (DEV_BUS_VIRT_BASE | 0x0034) +#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0100) +#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0140) #define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0300) #define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0600) #define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000) diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index 28020abf49e..cbdb5863d13 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -27,31 +27,21 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) void __init kirkwood_init_irq(void) { - int i; - orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)); orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)); /* - * Mask and clear GPIO IRQ interrupts. + * Initialize gpiolib for GPIOs 0-49. */ - writel(0, GPIO_LEVEL_MASK(0)); - writel(0, GPIO_EDGE_MASK(0)); - writel(0, GPIO_EDGE_CAUSE(0)); - writel(0, GPIO_LEVEL_MASK(32)); - writel(0, GPIO_EDGE_MASK(32)); - writel(0, GPIO_EDGE_CAUSE(32)); - - for (i = IRQ_KIRKWOOD_GPIO_START; i < NR_IRQS; i++) { - set_irq_chip(i, &orion_gpio_irq_chip); - set_irq_handler(i, handle_level_irq); - irq_desc[i].status |= IRQ_LEVEL; - set_irq_flags(i, IRQF_VALID); - } + orion_gpio_init(0, 32, GPIO_LOW_VIRT_BASE, 0, + IRQ_KIRKWOOD_GPIO_START); set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_0_7, gpio_irq_handler); set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_8_15, gpio_irq_handler); set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_16_23, gpio_irq_handler); set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_24_31, gpio_irq_handler); + + orion_gpio_init(32, 18, GPIO_HIGH_VIRT_BASE, 0, + IRQ_KIRKWOOD_GPIO_START + 32); set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_0_7, gpio_irq_handler); set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_8_15, gpio_irq_handler); set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_16_23, gpio_irq_handler); diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index 27901f702fe..7ce20184806 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -49,9 +49,6 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list) if (!variant_mask) return; - /* Initialize gpiolib. */ - orion_gpio_init(); - printk(KERN_DEBUG "initial MPP regs:"); for (i = 0; i < MPP_NR_REGS; i++) { mpp_ctrl[i] = readl(MPP_CTRL(i)); diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c index 1e5266f57e2..00cca22eca6 100644 --- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c +++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c @@ -166,6 +166,7 @@ MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board") .boot_params = 0x00000100, .init_machine = mv88f6281gtw_ge_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c index 65ee21fd2f3..7cdab577645 100644 --- a/arch/arm/mach-kirkwood/netspace_v2-setup.c +++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c @@ -261,6 +261,7 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2") .boot_params = 0x00000100, .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END @@ -271,6 +272,7 @@ MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2") .boot_params = 0x00000100, .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END @@ -281,6 +283,7 @@ MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2") .boot_params = 0x00000100, .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c index 93afd3c8bfd..6be627deb0f 100644 --- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c +++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c @@ -402,6 +402,7 @@ MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2") .boot_params = 0x00000100, .init_machine = netxbig_v2_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END @@ -412,6 +413,7 @@ MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2") .boot_params = 0x00000100, .init_machine = netxbig_v2_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index cfcca4174e2..f69beeff445 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -217,6 +217,7 @@ MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board") .boot_params = 0x00000100, .init_machine = openrd_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END @@ -228,6 +229,7 @@ MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board") .boot_params = 0x00000100, .init_machine = openrd_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END @@ -239,6 +241,7 @@ MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board") .boot_params = 0x00000100, .init_machine = openrd_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 513ad3102d7..ca294ff6d5b 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -18,8 +18,16 @@ #include <mach/bridge-regs.h> #include "common.h" +void kirkwood_enable_pcie(void) +{ + u32 curr = readl(CLOCK_GATING_CTRL); + if (!(curr & CGC_PEX0)) + writel(curr | CGC_PEX0, CLOCK_GATING_CTRL); +} + void __init kirkwood_pcie_id(u32 *dev, u32 *rev) { + kirkwood_enable_pcie(); *dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE); *rev = orion_pcie_rev((void __iomem *)PCIE_VIRT_BASE); } diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c index 0049614cd32..75c6601b8d8 100644 --- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c @@ -82,6 +82,7 @@ MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board") .boot_params = 0x00000100, .init_machine = rd88f6192_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index 0998a08cf42..0f75494d590 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -118,6 +118,7 @@ MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board") .boot_params = 0x00000100, .init_machine = rd88f6281_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c index d2eec35dfe0..0a95063f6d3 100644 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c @@ -134,6 +134,7 @@ MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board") .boot_params = 0x00000100, .init_machine = sheevaplug_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END @@ -144,6 +145,7 @@ MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board") .boot_params = 0x00000100, .init_machine = sheevaplug_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c index ce50e61aac9..e6b9b1b22a3 100644 --- a/arch/arm/mach-kirkwood/t5325-setup.c +++ b/arch/arm/mach-kirkwood/t5325-setup.c @@ -23,6 +23,7 @@ #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/input.h> +#include <sound/alc5623.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/kirkwood.h> @@ -134,6 +135,7 @@ static unsigned int hp_t5325_mpp_config[] __initdata = { MPP33_GE1_TXCTL, MPP39_AU_I2SBCLK, MPP40_AU_I2SDO, + MPP43_AU_I2SDI, MPP41_AU_I2SLRCLK, MPP42_AU_I2SMCLK, MPP45_GPIO, /* Power button */ @@ -141,6 +143,18 @@ static unsigned int hp_t5325_mpp_config[] __initdata = { 0 }; +static struct alc5623_platform_data alc5621_data = { + .add_ctrl = 0x3700, + .jack_det_ctrl = 0x4810, +}; + +static struct i2c_board_info i2c_board_info[] __initdata = { + { + I2C_BOARD_INFO("alc5621", 0x1a), + .platform_data = &alc5621_data, + }, +}; + #define HP_T5325_GPIO_POWER_OFF 48 static void hp_t5325_power_off(void) @@ -166,6 +180,9 @@ static void __init hp_t5325_init(void) kirkwood_ehci_init(); platform_device_register(&hp_t5325_button_device); + i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info)); + kirkwood_audio_init(); + if (gpio_request(HP_T5325_GPIO_POWER_OFF, "power-off") == 0 && gpio_direction_output(HP_T5325_GPIO_POWER_OFF, 0) == 0) pm_power_off = hp_t5325_power_off; @@ -187,6 +204,7 @@ MACHINE_START(T5325, "HP t5325 Thin Client") .boot_params = 0x00000100, .init_machine = hp_t5325_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index dc999c4c580..68f32f2bf55 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -135,6 +135,7 @@ MACHINE_START(TS219, "QNAP TS-119/TS-219") .boot_params = 0x00000100, .init_machine = qnap_ts219_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index 9a44029915e..d5d00997070 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -154,6 +154,8 @@ static void __init qnap_ts41x_init(void) static int __init ts41x_pci_init(void) { if (machine_is_ts41x()) { + u32 dev, rev; + /* * Without this explicit reset, the PCIe SATA controller * (Marvell 88sx7042/sata_mv) is known to stop working @@ -161,7 +163,11 @@ static int __init ts41x_pci_init(void) */ orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE); - kirkwood_pcie_init(KW_PCIE0); + kirkwood_pcie_id(&dev, &rev); + if (dev == MV88F6282_DEV_ID) + kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0); + else + kirkwood_pcie_init(KW_PCIE0); } return 0; @@ -173,6 +179,7 @@ MACHINE_START(TS41X, "QNAP TS-41x") .boot_params = 0x00000100, .init_machine = qnap_ts41x_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END diff --git a/arch/arm/mach-loki/common.c b/arch/arm/mach-loki/common.c index 818f19d7ab1..e41e909cf8f 100644 --- a/arch/arm/mach-loki/common.c +++ b/arch/arm/mach-loki/common.c @@ -18,6 +18,7 @@ #include <asm/timex.h> #include <asm/mach/map.h> #include <asm/mach/time.h> +#include <mach/bridge-regs.h> #include <mach/loki.h> #include <plat/orion_nand.h> #include <plat/time.h> @@ -290,9 +291,15 @@ void __init loki_uart1_init(void) /***************************************************************************** * Time handling ****************************************************************************/ +void __init loki_init_early(void) +{ + orion_time_set_base(TIMER_VIRT_BASE); +} + static void loki_timer_init(void) { - orion_time_init(IRQ_LOKI_BRIDGE, LOKI_TCLK); + orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, + IRQ_LOKI_BRIDGE, LOKI_TCLK); } struct sys_timer loki_timer = { diff --git a/arch/arm/mach-loki/common.h b/arch/arm/mach-loki/common.h index 26054fd0f05..a315dcf8887 100644 --- a/arch/arm/mach-loki/common.h +++ b/arch/arm/mach-loki/common.h @@ -18,6 +18,7 @@ struct mv643xx_eth_platform_data; */ void loki_map_io(void); void loki_init(void); +void loki_init_early(void); void loki_init_irq(void); extern struct mbus_dram_target_info loki_mbus_dram_info; diff --git a/arch/arm/mach-loki/include/mach/bridge-regs.h b/arch/arm/mach-loki/include/mach/bridge-regs.h index a3fabf70044..fd87732097c 100644 --- a/arch/arm/mach-loki/include/mach/bridge-regs.h +++ b/arch/arm/mach-loki/include/mach/bridge-regs.h @@ -17,11 +17,6 @@ #define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) #define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) - -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 #define BRIDGE_INT_TIMER1_CLR 0x0004 #define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) diff --git a/arch/arm/mach-loki/lb88rc8480-setup.c b/arch/arm/mach-loki/lb88rc8480-setup.c index a1e75e7fc50..35eae4e6abb 100644 --- a/arch/arm/mach-loki/lb88rc8480-setup.c +++ b/arch/arm/mach-loki/lb88rc8480-setup.c @@ -93,6 +93,7 @@ MACHINE_START(LB88RC8480, "Marvell LB88RC8480 Development Board") .boot_params = 0x00000100, .init_machine = lb88rc8480_init, .map_io = loki_map_io, + .init_early = loki_init_early, .init_irq = loki_init_irq, .timer = &loki_timer, MACHINE_END diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c index 29e390e89ff..20f3f125ed2 100644 --- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c +++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c @@ -148,6 +148,7 @@ MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL") .boot_params = 0x00000100, .init_machine = wxl_init, .map_io = mv78xx0_map_io, + .init_early = mv78xx0_init_early, .init_irq = mv78xx0_init_irq, .timer = &mv78xx0_timer, MACHINE_END diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 08465eb6a2c..44fb4e55be0 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -818,9 +818,15 @@ void __init mv78xx0_uart3_init(void) /***************************************************************************** * Time handling ****************************************************************************/ +void __init mv78xx0_init_early(void) +{ + orion_time_set_base(TIMER_VIRT_BASE); +} + static void mv78xx0_timer_init(void) { - orion_time_init(IRQ_MV78XX0_TIMER_1, get_tclk()); + orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, + IRQ_MV78XX0_TIMER_1, get_tclk()); } struct sys_timer mv78xx0_timer = { diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h index befc2247546..632e63d65e7 100644 --- a/arch/arm/mach-mv78xx0/common.h +++ b/arch/arm/mach-mv78xx0/common.h @@ -20,6 +20,7 @@ struct mv_sata_platform_data; int mv78xx0_core_index(void); void mv78xx0_map_io(void); void mv78xx0_init(void); +void mv78xx0_init_early(void); void mv78xx0_init_irq(void); extern struct mbus_dram_target_info mv78xx0_mbus_dram_info; diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c index 207c95e403b..df5aebe5b0f 100644 --- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c +++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c @@ -96,6 +96,7 @@ MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board") .boot_params = 0x00000100, .init_machine = db78x00_init, .map_io = mv78xx0_map_io, + .init_early = mv78xx0_init_early, .init_irq = mv78xx0_init_irq, .timer = &mv78xx0_timer, MACHINE_END diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h index 2d14c4fe294..c64dbb96dba 100644 --- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h +++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h @@ -20,10 +20,6 @@ #define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) #define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 #define BRIDGE_INT_TIMER1_CLR (~0x0004) #define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) diff --git a/arch/arm/mach-mv78xx0/include/mach/gpio.h b/arch/arm/mach-mv78xx0/include/mach/gpio.h index d9d1535ea10..77e1b843e76 100644 --- a/arch/arm/mach-mv78xx0/include/mach/gpio.h +++ b/arch/arm/mach-mv78xx0/include/mach/gpio.h @@ -6,35 +6,4 @@ * warranty of any kind, whether express or implied. */ -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -#include <mach/irqs.h> #include <plat/gpio.h> -#include <asm-generic/gpio.h> /* cansleep wrappers */ - -extern int mv78xx0_core_index(void); - -#define GPIO_MAX 32 -#define GPIO_OUT(pin) (DEV_BUS_VIRT_BASE + 0x0100) -#define GPIO_IO_CONF(pin) (DEV_BUS_VIRT_BASE + 0x0104) -#define GPIO_BLINK_EN(pin) (DEV_BUS_VIRT_BASE + 0x0108) -#define GPIO_IN_POL(pin) (DEV_BUS_VIRT_BASE + 0x010c) -#define GPIO_DATA_IN(pin) (DEV_BUS_VIRT_BASE + 0x0110) -#define GPIO_EDGE_CAUSE(pin) (DEV_BUS_VIRT_BASE + 0x0114) -#define GPIO_MASK_OFF (mv78xx0_core_index() ? 0x18 : 0) -#define GPIO_EDGE_MASK(pin) (DEV_BUS_VIRT_BASE + 0x0118 + GPIO_MASK_OFF) -#define GPIO_LEVEL_MASK(pin) (DEV_BUS_VIRT_BASE + 0x011c + GPIO_MASK_OFF) - -static inline int gpio_to_irq(int pin) -{ - return pin + IRQ_MV78XX0_GPIO_START; -} - -static inline int irq_to_gpio(int irq) -{ - return irq - IRQ_MV78XX0_GPIO_START; -} - - -#endif diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index 3eff39921d4..3674497162e 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -71,6 +71,7 @@ #define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000) #define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE | 0x0030) #define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE | 0x0034) +#define GPIO_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0100) #define I2C_0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000) #define I2C_1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1100) #define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c index 22b4ff893b3..08da497c39c 100644 --- a/arch/arm/mach-mv78xx0/irq.c +++ b/arch/arm/mach-mv78xx0/irq.c @@ -26,28 +26,18 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) void __init mv78xx0_init_irq(void) { - int i; - - /* Initialize gpiolib. */ - orion_gpio_init(); - orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)); orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)); orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF)); /* - * Mask and clear GPIO IRQ interrupts. + * Initialize gpiolib for GPIOs 0-31. (The GPIO interrupt mask + * registers for core #1 are at an offset of 0x18 from those of + * core #0.) */ - writel(0, GPIO_LEVEL_MASK(0)); - writel(0, GPIO_EDGE_MASK(0)); - writel(0, GPIO_EDGE_CAUSE(0)); - - for (i = IRQ_MV78XX0_GPIO_START; i < NR_IRQS; i++) { - set_irq_chip(i, &orion_gpio_irq_chip); - set_irq_handler(i, handle_level_irq); - irq_desc[i].status |= IRQ_LEVEL; - set_irq_flags(i, IRQF_VALID); - } + orion_gpio_init(0, 32, GPIO_VIRT_BASE, + mv78xx0_core_index() ? 0x18 : 0, + IRQ_MV78XX0_GPIO_START); set_irq_chained_handler(IRQ_MV78XX0_GPIO_0_7, gpio_irq_handler); set_irq_chained_handler(IRQ_MV78XX0_GPIO_8_15, gpio_irq_handler); set_irq_chained_handler(IRQ_MV78XX0_GPIO_16_23, gpio_irq_handler); diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c index 84db2dfc475..65b72c454cb 100644 --- a/arch/arm/mach-mv78xx0/mpp.c +++ b/arch/arm/mach-mv78xx0/mpp.c @@ -44,9 +44,6 @@ void __init mv78xx0_mpp_conf(unsigned int *mpp_list) if (!variant_mask) return; - /* Initialize gpiolib. */ - orion_gpio_init(); - printk(KERN_DEBUG "initial MPP regs:"); for (i = 0; i < MPP_NR_REGS; i++) { mpp_ctrl[i] = readl(MPP_CTRL(i)); diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c index 3511ad4d973..d927f14c681 100644 --- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c +++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c @@ -81,6 +81,7 @@ MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board") .boot_params = 0x00000100, .init_machine = rd78x00_masa_init, .map_io = mv78xx0_map_io, + .init_early = mv78xx0_init_early, .init_irq = mv78xx0_init_irq, .timer = &mv78xx0_timer, MACHINE_END diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 0717f887cba..340809a7d23 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -94,6 +94,7 @@ config MACH_MX31_3DS select MXC_DEBUG_BOARD select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_EHCI @@ -183,6 +184,7 @@ config MACH_MX35_3DS select MXC_DEBUG_BOARD select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND @@ -199,6 +201,15 @@ config MACH_KZM_ARM11_01 Include support for KZM-ARM11-01. This includes specific configurations for the board and its peripherals. +config MACH_BUG + bool "Support Buglabs BUGBase platform" + select SOC_IMX31 + select IMX_HAVE_PLATFORM_IMX_UART + default y + help + Include support for BUGBase 1.3 platform. This includes specific + configurations for the board and its peripherals. + config MACH_EUKREA_CPUIMX35 bool "Support Eukrea CPUIMX35 Platform" select SOC_IMX35 @@ -229,4 +240,18 @@ config MACH_EUKREA_MBIMXSD35_BASEBOARD endchoice +config MACH_VPR200 + bool "Support VPR200 platform" + select SOC_IMX35 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + help + Include support for VPR200 platform. This includes specific + configurations for the board and its peripherals. + endif diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 8db13294ad2..a54faf2cf5f 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -5,8 +5,8 @@ # Object file lists. obj-y := mm.o devices.o cpu.o -obj-$(CONFIG_SOC_IMX31) += clock-imx31.o iomux-imx31.o -obj-$(CONFIG_SOC_IMX35) += clock-imx35.o +obj-$(CONFIG_SOC_IMX31) += clock-imx31.o iomux-imx31.o ehci-imx31.o +obj-$(CONFIG_SOC_IMX35) += clock-imx35.o ehci-imx35.o obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o @@ -20,5 +20,7 @@ obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o +obj-$(CONFIG_MACH_BUG) += mach-bug.o obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd-baseboard.o +obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h index 677b18aa7ae..d545d86cc20 100644 --- a/arch/arm/mach-mx3/devices-imx35.h +++ b/arch/arm/mach-mx3/devices-imx35.h @@ -35,7 +35,7 @@ extern const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst; #define imx35_add_imx_i2c2(pdata) imx35_add_imx_i2c(2, pdata) extern const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst; -#define imx31_add_imx_keypad(pdata) \ +#define imx35_add_imx_keypad(pdata) \ imx_add_imx_keypad(&imx35_imx_keypad_data, pdata) extern const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst; diff --git a/arch/arm/mach-mx3/ehci-imx31.c b/arch/arm/mach-mx3/ehci-imx31.c new file mode 100644 index 00000000000..314a983ac61 --- /dev/null +++ b/arch/arm/mach-mx3/ehci-imx31.c @@ -0,0 +1,83 @@ +/* + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/mxc_ehci.h> + +#define USBCTRL_OTGBASE_OFFSET 0x600 + +#define MX31_OTG_SIC_SHIFT 29 +#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT) +#define MX31_OTG_PM_BIT (1 << 24) + +#define MX31_H2_SIC_SHIFT 21 +#define MX31_H2_SIC_MASK (0x3 << MX31_H2_SIC_SHIFT) +#define MX31_H2_PM_BIT (1 << 16) +#define MX31_H2_DT_BIT (1 << 5) + +#define MX31_H1_SIC_SHIFT 13 +#define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT) +#define MX31_H1_PM_BIT (1 << 8) +#define MX31_H1_DT_BIT (1 << 4) + +int mx31_initialize_usb_hw(int port, unsigned int flags) +{ + unsigned int v; + + v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); + + switch (port) { + case 0: /* OTG port */ + v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_OTG_PM_BIT; + + break; + case 1: /* H1 port */ + v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_H1_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX31_H1_DT_BIT; + + break; + case 2: /* H2 port */ + v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_H2_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX31_H2_DT_BIT; + + break; + default: + return -EINVAL; + } + + writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); + + return 0; +} + diff --git a/arch/arm/mach-mx3/ehci-imx35.c b/arch/arm/mach-mx3/ehci-imx35.c new file mode 100644 index 00000000000..33983a478c6 --- /dev/null +++ b/arch/arm/mach-mx3/ehci-imx35.c @@ -0,0 +1,80 @@ +/* + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/mxc_ehci.h> + +#define USBCTRL_OTGBASE_OFFSET 0x600 + +#define MX35_OTG_SIC_SHIFT 29 +#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT) +#define MX35_OTG_PM_BIT (1 << 24) + +#define MX35_H1_SIC_SHIFT 21 +#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) +#define MX35_H1_PM_BIT (1 << 8) +#define MX35_H1_IPPUE_UP_BIT (1 << 7) +#define MX35_H1_IPPUE_DOWN_BIT (1 << 6) +#define MX35_H1_TLL_BIT (1 << 5) +#define MX35_H1_USBTE_BIT (1 << 4) + +int mx35_initialize_usb_hw(int port, unsigned int flags) +{ + unsigned int v; + + v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); + + switch (port) { + case 0: /* OTG port */ + v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX35_OTG_PM_BIT; + + break; + case 1: /* H1 port */ + v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT | + MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX35_H1_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX35_H1_TLL_BIT; + + if (flags & MXC_EHCI_INTERNAL_PHY) + v |= MX35_H1_USBTE_BIT; + + if (flags & MXC_EHCI_IPPUE_DOWN) + v |= MX35_H1_IPPUE_DOWN_BIT; + + if (flags & MXC_EHCI_IPPUE_UP) + v |= MX35_H1_IPPUE_UP_BIT; + + break; + default: + return -EINVAL; + } + + writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); + + return 0; +} + diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c index 14a5ffc939a..80761474c0f 100644 --- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c @@ -165,8 +165,8 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = { MX35_PAD_SD1_DATA3__ESDHC1_DAT3, }; -#define GPIO_LED1 (2 * 32 + 29) -#define GPIO_SWITCH1 (2 * 32 + 25) +#define GPIO_LED1 IMX_GPIO_NR(3, 29) +#define GPIO_SWITCH1 IMX_GPIO_NR(3, 25) #define GPIO_LCDPWR (4) static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd, diff --git a/arch/arm/mach-mx3/iomux-imx31.c b/arch/arm/mach-mx3/iomux-imx31.c index a1d7fa5123d..cf8f8099ebd 100644 --- a/arch/arm/mach-mx3/iomux-imx31.c +++ b/arch/arm/mach-mx3/iomux-imx31.c @@ -97,7 +97,7 @@ EXPORT_SYMBOL(mxc_iomux_set_pad); * - reserves the pin so that it is not claimed by another driver * - setups the iomux according to the configuration */ -int mxc_iomux_alloc_pin(const unsigned int pin, const char *label) +int mxc_iomux_alloc_pin(unsigned int pin, const char *label) { unsigned pad = pin & IOMUX_PADNUM_MASK; @@ -118,10 +118,10 @@ int mxc_iomux_alloc_pin(const unsigned int pin, const char *label) } EXPORT_SYMBOL(mxc_iomux_alloc_pin); -int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count, +int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count, const char *label) { - unsigned int *p = pin_list; + const unsigned int *p = pin_list; int i; int ret = -EINVAL; @@ -139,7 +139,7 @@ setup_error: } EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins); -void mxc_iomux_release_pin(const unsigned int pin) +void mxc_iomux_release_pin(unsigned int pin) { unsigned pad = pin & IOMUX_PADNUM_MASK; @@ -148,9 +148,9 @@ void mxc_iomux_release_pin(const unsigned int pin) } EXPORT_SYMBOL(mxc_iomux_release_pin); -void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count) +void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count) { - unsigned int *p = pin_list; + const unsigned int *p = pin_list; int i; for (i = 0; i < count; i++) { diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c index 28b6f414b5d..226829bf7c2 100644 --- a/arch/arm/mach-mx3/mach-armadillo5x0.c +++ b/arch/arm/mach-mx3/mach-armadillo5x0.c @@ -133,7 +133,6 @@ static int armadillo5x0_pins[] = { }; /* USB */ -#if defined(CONFIG_USB_ULPI) #define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4) #define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6) @@ -176,8 +175,10 @@ static int usbotg_init(struct platform_device *pdev) gpio_set_value(OTG_RESET, 0/*LOW*/); mdelay(5); gpio_set_value(OTG_RESET, 1/*HIGH*/); + mdelay(10); - return 0; + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_INTERFACE_DIFF_UNI); otg_free_reset: gpio_free(OTG_RESET); @@ -233,8 +234,10 @@ static int usbh2_init(struct platform_device *pdev) gpio_set_value(USBH2_RESET, 0/*LOW*/); mdelay(5); gpio_set_value(USBH2_RESET, 1/*HIGH*/); + mdelay(10); - return 0; + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_INTERFACE_DIFF_UNI); h2_free_reset: gpio_free(USBH2_RESET); @@ -246,15 +249,12 @@ h2_free_cs: static struct mxc_usbh_platform_data usbotg_pdata __initdata = { .init = usbotg_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, }; static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .init = usbh2_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, }; -#endif /* CONFIG_USB_ULPI */ /* RTC over I2C*/ #define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4) @@ -547,15 +547,15 @@ static void __init armadillo5x0_init(void) i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1); /* USB */ -#if defined(CONFIG_USB_ULPI) - usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - - imx31_add_mxc_ehci_otg(&usbotg_pdata); - imx31_add_mxc_ehci_hs(2, &usbh2_pdata); -#endif + + usbotg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (usbotg_pdata.otg) + imx31_add_mxc_ehci_otg(&usbotg_pdata); + usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (usbh2_pdata.otg) + imx31_add_mxc_ehci_hs(2, &usbh2_pdata); } static void __init armadillo5x0_timer_init(void) @@ -569,9 +569,10 @@ static struct sys_timer armadillo5x0_timer = { MACHINE_START(ARMADILLO5X0, "Armadillo-500") /* Maintainer: Alberto Panizzo */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31_map_io, - .init_irq = mx31_init_irq, - .timer = &armadillo5x0_timer, - .init_machine = armadillo5x0_init, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .timer = &armadillo5x0_timer, + .init_machine = armadillo5x0_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-bug.c b/arch/arm/mach-mx3/mach-bug.c new file mode 100644 index 00000000000..d137d7078ee --- /dev/null +++ b/arch/arm/mach-mx3/mach-bug.c @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2011 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <mach/iomux-mx3.h> +#include <mach/imx-uart.h> +#include <mach/hardware.h> +#include <mach/common.h> + +#include <asm/mach/time.h> +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include "devices-imx31.h" + +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static const unsigned int bug_pins[] __initconst = { + MX31_PIN_PC_RST__CTS5, + MX31_PIN_PC_VS2__RTS5, + MX31_PIN_PC_BVD2__TXD5, + MX31_PIN_PC_BVD1__RXD5, +}; + +static void __init bug_board_init(void) +{ + mxc_iomux_setup_multiple_pins(bug_pins, + ARRAY_SIZE(bug_pins), "uart-4"); + imx31_add_imx_uart4(&uart_pdata); +} + +static void __init bug_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +static struct sys_timer bug_timer = { + .init = bug_timer_init, +}; + +MACHINE_START(BUG, "BugLabs BUGBase") + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .timer = &bug_timer, + .init_machine = bug_board_init, +MACHINE_END diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c index 26ae90f0258..ec63d998f64 100644 --- a/arch/arm/mach-mx3/mach-cpuimx35.c +++ b/arch/arm/mach-mx3/mach-cpuimx35.c @@ -60,7 +60,7 @@ static struct tsc2007_platform_data tsc2007_info = { .x_plate_ohms = 180, }; -#define TSC2007_IRQGPIO (2 * 32 + 2) +#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 2) static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { { I2C_BOARD_INFO("pcf8563", 0x51), @@ -111,15 +111,25 @@ static const struct mxc_nand_platform_data .flash_bbt = 1, }; +static int eukrea_cpuimx35_otg_init(struct platform_device *pdev) +{ + return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} + static const struct mxc_usbh_platform_data otg_pdata __initconst = { + .init = eukrea_cpuimx35_otg_init, .portsc = MXC_EHCI_MODE_UTMI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; +static int eukrea_cpuimx35_usbh1_init(struct platform_device *pdev) +{ + return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI | + MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN); +} + static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { + .init = eukrea_cpuimx35_usbh1_init, .portsc = MXC_EHCI_MODE_SERIAL, - .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | - MXC_EHCI_IPPUE_DOWN, }; static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { @@ -146,7 +156,7 @@ __setup("otg_mode=", eukrea_cpuimx35_otg_mode); /* * Board specific initialization. */ -static void __init mxc_board_init(void) +static void __init eukrea_cpuimx35_init(void) { mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads, ARRAY_SIZE(eukrea_cpuimx35_pads)); @@ -184,9 +194,10 @@ struct sys_timer eukrea_cpuimx35_timer = { MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35") /* Maintainer: Eukrea Electromatique */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx35_map_io, - .init_irq = mx35_init_irq, - .init_machine = mxc_board_init, - .timer = &eukrea_cpuimx35_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx35_map_io, + .init_early = imx35_init_early, + .init_irq = mx35_init_irq, + .timer = &eukrea_cpuimx35_timer, + .init_machine = eukrea_cpuimx35_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c index df1a6ce8e3e..d35621d62b4 100644 --- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c +++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c @@ -266,17 +266,14 @@ static void __init kzm_timer_init(void) } static struct sys_timer kzm_timer = { - .init = kzm_timer_init, + .init = kzm_timer_init, }; -/* - * The following uses standard kernel macros define in arch.h in order to - * initialize __mach_desc_KZM_ARM11_01 data structure. - */ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = kzm_map_io, - .init_irq = mx31_init_irq, - .init_machine = kzm_board_init, - .timer = &kzm_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = kzm_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .timer = &kzm_timer, + .init_machine = kzm_board_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c index 0d65db885be..544d3e414f5 100644 --- a/arch/arm/mach-mx3/mach-mx31_3ds.c +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c @@ -21,9 +21,13 @@ #include <linux/platform_device.h> #include <linux/mfd/mc13783.h> #include <linux/spi/spi.h> +#include <linux/spi/l4f00242t03.h> #include <linux/regulator/machine.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> +#include <linux/memblock.h> + +#include <media/soc_camera.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -35,6 +39,10 @@ #include <mach/iomux-mx3.h> #include <mach/3ds_debugboard.h> #include <mach/ulpi.h> +#include <mach/mmc.h> +#include <mach/ipu.h> +#include <mach/mx3fb.h> +#include <mach/mx3_camera.h> #include "devices-imx31.h" #include "devices.h" @@ -42,10 +50,6 @@ /* CPLD IRQ line for external uart, external ethernet etc */ #define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1) -/* - * This file contains the board-specific initialization routines. - */ - static int mx31_3ds_pins[] = { /* UART1 */ MX31_PIN_CTS1__CTS1, @@ -53,6 +57,12 @@ static int mx31_3ds_pins[] = { MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1, IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), + /*SPI0*/ + MX31_PIN_CSPI1_SCLK__SCLK, + MX31_PIN_CSPI1_MOSI__MOSI, + MX31_PIN_CSPI1_MISO__MISO, + MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI1_SS2__SS2, /* CS for LCD */ /* SPI 1 */ MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_MOSI__MOSI, @@ -100,6 +110,252 @@ static int mx31_3ds_pins[] = { IOMUX_MODE(MX31_PIN_PC_RW_B, IOMUX_CONFIG_ALT1), /* USB Host2 reset */ IOMUX_MODE(MX31_PIN_USB_BYP, IOMUX_CONFIG_GPIO), + /* I2C1 */ + MX31_PIN_I2C_CLK__I2C1_SCL, + MX31_PIN_I2C_DAT__I2C1_SDA, + /* SDHC1 */ + MX31_PIN_SD1_DATA3__SD1_DATA3, + MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA1__SD1_DATA1, + MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_CLK__SD1_CLK, + MX31_PIN_SD1_CMD__SD1_CMD, + MX31_PIN_GPIO3_1__GPIO3_1, /* Card detect */ + MX31_PIN_GPIO3_0__GPIO3_0, /* OE */ + /* Framebuffer */ + MX31_PIN_LD0__LD0, + MX31_PIN_LD1__LD1, + MX31_PIN_LD2__LD2, + MX31_PIN_LD3__LD3, + MX31_PIN_LD4__LD4, + MX31_PIN_LD5__LD5, + MX31_PIN_LD6__LD6, + MX31_PIN_LD7__LD7, + MX31_PIN_LD8__LD8, + MX31_PIN_LD9__LD9, + MX31_PIN_LD10__LD10, + MX31_PIN_LD11__LD11, + MX31_PIN_LD12__LD12, + MX31_PIN_LD13__LD13, + MX31_PIN_LD14__LD14, + MX31_PIN_LD15__LD15, + MX31_PIN_LD16__LD16, + MX31_PIN_LD17__LD17, + MX31_PIN_VSYNC3__VSYNC3, + MX31_PIN_HSYNC__HSYNC, + MX31_PIN_FPSHIFT__FPSHIFT, + MX31_PIN_CONTRAST__CONTRAST, + /* CSI */ + MX31_PIN_CSI_D6__CSI_D6, + MX31_PIN_CSI_D7__CSI_D7, + MX31_PIN_CSI_D8__CSI_D8, + MX31_PIN_CSI_D9__CSI_D9, + MX31_PIN_CSI_D10__CSI_D10, + MX31_PIN_CSI_D11__CSI_D11, + MX31_PIN_CSI_D12__CSI_D12, + MX31_PIN_CSI_D13__CSI_D13, + MX31_PIN_CSI_D14__CSI_D14, + MX31_PIN_CSI_D15__CSI_D15, + MX31_PIN_CSI_HSYNC__CSI_HSYNC, + MX31_PIN_CSI_MCLK__CSI_MCLK, + MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, + MX31_PIN_CSI_VSYNC__CSI_VSYNC, + MX31_PIN_CSI_D5__GPIO3_5, /* CMOS PWDN */ + IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_GPIO), /* CMOS reset */ +}; + +/* + * Camera support + */ +static phys_addr_t mx3_camera_base __initdata; +#define MX31_3DS_CAMERA_BUF_SIZE SZ_8M + +#define MX31_3DS_GPIO_CAMERA_PW IOMUX_TO_GPIO(MX31_PIN_CSI_D5) +#define MX31_3DS_GPIO_CAMERA_RST IOMUX_TO_GPIO(MX31_PIN_RI_DTE1) + +static struct gpio mx31_3ds_camera_gpios[] = { + { MX31_3DS_GPIO_CAMERA_PW, GPIOF_OUT_INIT_HIGH, "camera-power" }, + { MX31_3DS_GPIO_CAMERA_RST, GPIOF_OUT_INIT_HIGH, "camera-reset" }, +}; + +static int __init mx31_3ds_camera_alloc_dma(void) +{ + int dma; + + if (!mx3_camera_base) + return -ENOMEM; + + dma = dma_declare_coherent_memory(&mx3_camera.dev, + mx3_camera_base, mx3_camera_base, + MX31_3DS_CAMERA_BUF_SIZE, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + + if (!(dma & DMA_MEMORY_MAP)) + return -ENOMEM; + + return 0; +} + +static int mx31_3ds_camera_power(struct device *dev, int on) +{ + /* enable or disable the camera */ + pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE"); + gpio_set_value(MX31_3DS_GPIO_CAMERA_PW, on ? 0 : 1); + + if (!on) + goto out; + + /* If enabled, give a reset impulse */ + gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 0); + msleep(20); + gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 1); + msleep(100); + +out: + return 0; +} + +static struct i2c_board_info mx31_3ds_i2c_camera = { + I2C_BOARD_INFO("ov2640", 0x30), +}; + +static struct regulator_bulk_data mx31_3ds_camera_regs[] = { + { .supply = "cmos_vcore" }, + { .supply = "cmos_2v8" }, +}; + +static struct soc_camera_link iclink_ov2640 = { + .bus_id = 0, + .board_info = &mx31_3ds_i2c_camera, + .i2c_adapter_id = 0, + .power = mx31_3ds_camera_power, + .regulators = mx31_3ds_camera_regs, + .num_regulators = ARRAY_SIZE(mx31_3ds_camera_regs), +}; + +static struct platform_device mx31_3ds_ov2640 = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &iclink_ov2640, + }, +}; + +struct mx3_camera_pdata mx31_3ds_camera_pdata = { + .dma_dev = &mx3_ipu.dev, + .flags = MX3_CAMERA_DATAWIDTH_10, + .mclk_10khz = 2600, +}; + +/* + * FB support + */ +static const struct fb_videomode fb_modedb[] = { + { /* 480x640 @ 60 Hz */ + .name = "Epson-VGA", + .refresh = 60, + .xres = 480, + .yres = 640, + .pixclock = 41701, + .left_margin = 20, + .right_margin = 41, + .upper_margin = 10, + .lower_margin = 5, + .hsync_len = 20, + .vsync_len = 10, + .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +static struct ipu_platform_data mx3_ipu_data = { + .irq_base = MXC_IPU_IRQ_START, +}; + +static struct mx3fb_platform_data mx3fb_pdata = { + .dma_dev = &mx3_ipu.dev, + .name = "Epson-VGA", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), +}; + +/* LCD */ +static struct l4f00242t03_pdata mx31_3ds_l4f00242t03_pdata = { + .reset_gpio = IOMUX_TO_GPIO(MX31_PIN_LCS1), + .data_enable_gpio = IOMUX_TO_GPIO(MX31_PIN_SER_RS), + .core_supply = "lcd_2v8", + .io_supply = "vdd_lcdio", +}; + +/* + * Support for SD card slot in personality board + */ +#define MX31_3DS_GPIO_SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_GPIO3_1) +#define MX31_3DS_GPIO_SDHC1_BE IOMUX_TO_GPIO(MX31_PIN_GPIO3_0) + +static struct gpio mx31_3ds_sdhc1_gpios[] = { + { MX31_3DS_GPIO_SDHC1_CD, GPIOF_IN, "sdhc1-card-detect" }, + { MX31_3DS_GPIO_SDHC1_BE, GPIOF_OUT_INIT_LOW, "sdhc1-bus-en" }, +}; + +static int mx31_3ds_sdhc1_init(struct device *dev, + irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = gpio_request_array(mx31_3ds_sdhc1_gpios, + ARRAY_SIZE(mx31_3ds_sdhc1_gpios)); + if (ret) { + pr_warning("Unable to request the SD/MMC GPIOs.\n"); + return ret; + } + + ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), + detect_irq, IRQF_DISABLED | + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "sdhc1-detect", data); + if (ret) { + pr_warning("Unable to request the SD/MMC card-detect IRQ.\n"); + goto gpio_free; + } + + return 0; + +gpio_free: + gpio_free_array(mx31_3ds_sdhc1_gpios, + ARRAY_SIZE(mx31_3ds_sdhc1_gpios)); + return ret; +} + +static void mx31_3ds_sdhc1_exit(struct device *dev, void *data) +{ + free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), data); + gpio_free_array(mx31_3ds_sdhc1_gpios, + ARRAY_SIZE(mx31_3ds_sdhc1_gpios)); +} + +static void mx31_3ds_sdhc1_setpower(struct device *dev, unsigned int vdd) +{ + /* + * While the voltage stuff is done by the driver, activate the + * Buffer Enable Pin only if there is a card in slot to fix the card + * voltage issue caused by bi-directional chip TXB0108 on 3Stack. + * Done here because at this stage we have for sure a debounced value + * of the presence of the card, showed by the value of vdd. + * 7 == ilog2(MMC_VDD_165_195) + */ + if (vdd > 7) + gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 1); + else + gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 0); +} + +static struct imxmmc_platform_data sdhc1_pdata = { + .init = mx31_3ds_sdhc1_init, + .exit = mx31_3ds_sdhc1_exit, + .setpower = mx31_3ds_sdhc1_setpower, }; /* @@ -138,7 +394,71 @@ static struct regulator_init_data gpo_init = { } }; -static struct mc13783_regulator_init_data mx31_3ds_regulators[] = { +static struct regulator_consumer_supply vmmc2_consumers[] = { + REGULATOR_SUPPLY("vmmc", "mxc-mmc.0"), +}; + +static struct regulator_init_data vmmc2_init = { + .constraints = { + .min_uV = 3000000, + .max_uV = 3000000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vmmc2_consumers), + .consumer_supplies = vmmc2_consumers, +}; + +static struct regulator_consumer_supply vmmc1_consumers[] = { + REGULATOR_SUPPLY("lcd_2v8", NULL), + REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"), +}; + +static struct regulator_init_data vmmc1_init = { + .constraints = { + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers), + .consumer_supplies = vmmc1_consumers, +}; + +static struct regulator_consumer_supply vgen_consumers[] = { + REGULATOR_SUPPLY("vdd_lcdio", NULL), +}; + +static struct regulator_init_data vgen_init = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vgen_consumers), + .consumer_supplies = vgen_consumers, +}; + +static struct regulator_consumer_supply vvib_consumers[] = { + REGULATOR_SUPPLY("cmos_vcore", "soc-camera-pdrv.0"), +}; + +static struct regulator_init_data vvib_init = { + .constraints = { + .min_uV = 1300000, + .max_uV = 1300000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vvib_consumers), + .consumer_supplies = vvib_consumers, +}; + +static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = { { .id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */ .init_data = &pwgtx_init, @@ -152,17 +472,38 @@ static struct mc13783_regulator_init_data mx31_3ds_regulators[] = { }, { .id = MC13783_REG_GPO3, /* Turn on 3.3V */ .init_data = &gpo_init, + }, { + .id = MC13783_REG_VMMC2, /* Power MMC/SD, WiFi/Bluetooth. */ + .init_data = &vmmc2_init, + }, { + .id = MC13783_REG_VMMC1, /* Power LCD, CMOS, FM, GPS, Accel. */ + .init_data = &vmmc1_init, + }, { + .id = MC13783_REG_VGEN, /* Power LCD */ + .init_data = &vgen_init, + }, { + .id = MC13783_REG_VVIB, /* Power CMOS */ + .init_data = &vvib_init, }, }; /* MC13783 */ -static struct mc13783_platform_data mc13783_pdata __initdata = { +static struct mc13xxx_platform_data mc13783_pdata __initdata = { .regulators = mx31_3ds_regulators, .num_regulators = ARRAY_SIZE(mx31_3ds_regulators), - .flags = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN, + .flags = MC13XXX_USE_REGULATOR | MC13XXX_USE_TOUCHSCREEN }; /* SPI */ +static int spi0_internal_chipselect[] = { + MXC_SPI_CS(2), +}; + +static const struct spi_imx_master spi0_pdata __initconst = { + .chipselect = spi0_internal_chipselect, + .num_chipselect = ARRAY_SIZE(spi0_internal_chipselect), +}; + static int spi1_internal_chipselect[] = { MXC_SPI_CS(0), MXC_SPI_CS(2), @@ -182,6 +523,12 @@ static struct spi_board_info mx31_3ds_spi_devs[] __initdata = { .platform_data = &mc13783_pdata, .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), .mode = SPI_CS_HIGH, + }, { + .modalias = "l4f00242t03", + .max_speed_hz = 5000000, + .bus_num = 0, + .chip_select = 0, /* SS2 */ + .platform_data = &mx31_3ds_l4f00242t03_pdata, }, }; @@ -245,6 +592,11 @@ usbotg_free_reset: return err; } +static int mx31_3ds_otg_init(struct platform_device *pdev) +{ + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); +} + static int mx31_3ds_host2_init(struct platform_device *pdev) { int err; @@ -276,25 +628,25 @@ static int mx31_3ds_host2_init(struct platform_device *pdev) mdelay(1); gpio_set_value(USBH2_RST_B, 1); - return 0; + + mdelay(10); + + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); usbotg_free_reset: gpio_free(USBH2_RST_B); return err; } -#if defined(CONFIG_USB_ULPI) static struct mxc_usbh_platform_data otg_pdata __initdata = { + .init = mx31_3ds_otg_init, .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_POWER_PINS_ENABLED, }; static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .init = mx31_3ds_host2_init, .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_POWER_PINS_ENABLED, }; -#endif static const struct fsl_usb2_platform_data usbotg_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, @@ -320,19 +672,18 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -/* - * Set up static virtual mappings. - */ -static void __init mx31_3ds_map_io(void) -{ - mx31_map_io(); -} +static const struct imxi2c_platform_data mx31_3ds_i2c0_data __initconst = { + .bitrate = 100000, +}; -/*! - * Board specific initialization. - */ -static void __init mxc_board_init(void) +static struct platform_device *devices[] __initdata = { + &mx31_3ds_ov2640, +}; + +static void __init mx31_3ds_init(void) { + int ret; + mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins), "mx31_3ds"); @@ -343,20 +694,22 @@ static void __init mxc_board_init(void) spi_register_board_info(mx31_3ds_spi_devs, ARRAY_SIZE(mx31_3ds_spi_devs)); + platform_add_devices(devices, ARRAY_SIZE(devices)); + imx31_add_imx_keypad(&mx31_3ds_keymap_data); mx31_3ds_usbotg_init(); -#if defined(CONFIG_USB_ULPI) if (otg_mode_host) { - otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - - imx31_add_mxc_ehci_otg(&otg_pdata); + otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (otg_pdata.otg) + imx31_add_mxc_ehci_otg(&otg_pdata); } - usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - imx31_add_mxc_ehci_hs(2, &usbh2_pdata); -#endif + usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (usbh2_pdata.otg) + imx31_add_mxc_ehci_hs(2, &usbh2_pdata); + if (!otg_mode_host) imx31_add_fsl_usb2_udc(&usbotg_pdata); @@ -364,6 +717,26 @@ static void __init mxc_board_init(void) printk(KERN_WARNING "Init of the debug board failed, all " "devices on the debug board are unusable.\n"); imx31_add_imx2_wdt(NULL); + imx31_add_imx_i2c0(&mx31_3ds_i2c0_data); + imx31_add_mxc_mmc(0, &sdhc1_pdata); + + imx31_add_spi_imx0(&spi0_pdata); + mxc_register_device(&mx3_ipu, &mx3_ipu_data); + mxc_register_device(&mx3_fb, &mx3fb_pdata); + + /* CSI */ + /* Camera power: default - off */ + ret = gpio_request_array(mx31_3ds_camera_gpios, + ARRAY_SIZE(mx31_3ds_camera_gpios)); + if (ret) { + pr_err("Failed to request camera gpios"); + iclink_ov2640.power = NULL; + } + + if (!mx31_3ds_camera_alloc_dma()) + mxc_register_device(&mx3_camera, &mx31_3ds_camera_pdata); + else + pr_err("Failed to allocate dma memory for camera"); } static void __init mx31_3ds_timer_init(void) @@ -375,15 +748,22 @@ static struct sys_timer mx31_3ds_timer = { .init = mx31_3ds_timer_init, }; -/* - * The following uses standard kernel macros defined in arch.h in order to - * initialize __mach_desc_MX31_3DS data structure. - */ +static void __init mx31_3ds_reserve(void) +{ + /* reserve MX31_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */ + mx3_camera_base = memblock_alloc(MX31_3DS_CAMERA_BUF_SIZE, + MX31_3DS_CAMERA_BUF_SIZE); + memblock_free(mx3_camera_base, MX31_3DS_CAMERA_BUF_SIZE); + memblock_remove(mx3_camera_base, MX31_3DS_CAMERA_BUF_SIZE); +} + MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31_3ds_map_io, - .init_irq = mx31_init_irq, - .init_machine = mxc_board_init, - .timer = &mx31_3ds_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .timer = &mx31_3ds_timer, + .init_machine = mx31_3ds_init, + .reserve = mx31_3ds_reserve, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c index 88b97d62b57..4e4b780c481 100644 --- a/arch/arm/mach-mx3/mach-mx31ads.c +++ b/arch/arm/mach-mx3/mach-mx31ads.c @@ -69,12 +69,8 @@ #define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11) #define MXC_MAX_EXP_IO_LINES 16 -/* - * This file contains the board-specific initialization routines. - */ -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) -/*! +/* * The serial port definition structure. */ static struct plat_serial8250_port serial_platform_data[] = { @@ -110,14 +106,7 @@ static int __init mxc_init_extuart(void) { return platform_device_register(&serial_device); } -#else -static inline int mxc_init_extuart(void) -{ - return 0; -} -#endif -#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -134,11 +123,6 @@ static inline void mxc_init_imx_uart(void) mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0"); imx31_add_imx_uart0(&uart_pdata); } -#else /* !SERIAL_IMX */ -static inline void mxc_init_imx_uart(void) -{ -} -#endif /* !SERIAL_IMX */ static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc) { @@ -160,7 +144,7 @@ static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc) /* * Disable an expio pin's interrupt by setting the bit in the imr. - * @param irq an expio virtual irq number + * @param d an expio virtual irq description */ static void expio_mask_irq(struct irq_data *d) { @@ -172,7 +156,7 @@ static void expio_mask_irq(struct irq_data *d) /* * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr. - * @param irq an expanded io virtual irq number + * @param d an expio virtual irq description */ static void expio_ack_irq(struct irq_data *d) { @@ -183,7 +167,7 @@ static void expio_ack_irq(struct irq_data *d) /* * Enable a expio pin's interrupt by clearing the bit in the imr. - * @param irq a expio virtual irq number + * @param d an expio virtual irq description */ static void expio_unmask_irq(struct irq_data *d) { @@ -476,7 +460,6 @@ static struct wm8350_platform_data __initdata mx31_wm8350_pdata = { }; #endif -#if defined(CONFIG_I2C_IMX) || defined(CONFIG_I2C_IMX_MODULE) static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = { #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 { @@ -497,11 +480,6 @@ static void mxc_init_i2c(void) imx31_add_imx_i2c1(NULL); } -#else -static void mxc_init_i2c(void) -{ -} -#endif static unsigned int ssi_pins[] = { MX31_PIN_SFS5__SFS5, @@ -516,9 +494,7 @@ static void mxc_init_audio(void) mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi"); } -/*! - * This structure defines static mappings for the i.MX31ADS board. - */ +/* static mappings */ static struct map_desc mx31ads_io_desc[] __initdata = { { .virtual = MX31_CS4_BASE_ADDR_VIRT, @@ -528,9 +504,6 @@ static struct map_desc mx31ads_io_desc[] __initdata = { }, }; -/*! - * Set up static virtual mappings. - */ static void __init mx31ads_map_io(void) { mx31_map_io(); @@ -543,10 +516,7 @@ static void __init mx31ads_init_irq(void) mx31ads_init_expio(); } -/*! - * Board specific initialization. - */ -static void __init mxc_board_init(void) +static void __init mx31ads_init(void) { mxc_init_extuart(); mxc_init_imx_uart(); @@ -563,15 +533,12 @@ static struct sys_timer mx31ads_timer = { .init = mx31ads_timer_init, }; -/* - * The following uses standard kernel macros defined in arch.h in order to - * initialize __mach_desc_MX31ADS data structure. - */ MACHINE_START(MX31ADS, "Freescale MX31ADS") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31ads_map_io, - .init_irq = mx31ads_init_irq, - .init_machine = mxc_board_init, - .timer = &mx31ads_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx31ads_map_io, + .init_early = imx31_init_early, + .init_irq = mx31ads_init_irq, + .timer = &mx31ads_timer, + .init_machine = mx31ads_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c index 2c595483f35..ed95745163b 100644 --- a/arch/arm/mach-mx3/mach-mx31lilly.c +++ b/arch/arm/mach-mx3/mach-mx31lilly.c @@ -24,6 +24,7 @@ #include <linux/init.h> #include <linux/clk.h> #include <linux/gpio.h> +#include <linux/delay.h> #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/smsc911x.h> @@ -110,55 +111,9 @@ static struct platform_device physmap_flash_device = { /* USB */ -#if defined(CONFIG_USB_ULPI) - #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) -static int usbotg_init(struct platform_device *pdev) -{ - unsigned int pins[] = { - MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, - MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, - MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, - MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, - MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, - MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, - MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, - MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, - MX31_PIN_USBOTG_CLK__USBOTG_CLK, - MX31_PIN_USBOTG_DIR__USBOTG_DIR, - MX31_PIN_USBOTG_NXT__USBOTG_NXT, - MX31_PIN_USBOTG_STP__USBOTG_STP, - }; - - mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB OTG"); - - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG); - - mxc_iomux_set_gpr(MUX_PGP_USB_4WIRE, true); - mxc_iomux_set_gpr(MUX_PGP_USB_COMMON, true); - - /* chip select */ - mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE2, IOMUX_CONFIG_GPIO), - "USBOTG_CS"); - gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), "USBH1 CS"); - gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), 0); - - return 0; -} - static int usbh1_init(struct platform_device *pdev) { int pins[] = { @@ -183,7 +138,10 @@ static int usbh1_init(struct platform_device *pdev) mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true); - return 0; + mdelay(10); + + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_INTERFACE_SINGLE_UNI); } static int usbh2_init(struct platform_device *pdev) @@ -220,41 +178,30 @@ static int usbh2_init(struct platform_device *pdev) gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS"); gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0); - return 0; -} + mdelay(10); -static struct mxc_usbh_platform_data usbotg_pdata = { - .init = usbotg_init, - .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED, -}; + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); +} static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { .init = usbh1_init, .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, - .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI, }; static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .init = usbh2_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED, }; static void lilly1131_usb_init(void) { - usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - imx31_add_mxc_ehci_hs(1, &usbh1_pdata); - imx31_add_mxc_ehci_hs(2, &usbh2_pdata); -} -#else -static inline void lilly1131_usb_init(void) {} -#endif /* CONFIG_USB_ULPI */ + usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (usbh2_pdata.otg) + imx31_add_mxc_ehci_hs(2, &usbh2_pdata); +} /* SPI */ @@ -274,8 +221,8 @@ static const struct spi_imx_master spi1_pdata __initconst = { .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), }; -static struct mc13783_platform_data mc13783_pdata __initdata = { - .flags = MC13783_USE_RTC | MC13783_USE_TOUCHSCREEN, +static struct mc13xxx_platform_data mc13783_pdata __initdata = { + .flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN, }; static struct spi_board_info mc13783_dev __initdata = { @@ -347,10 +294,10 @@ static struct sys_timer mx31lilly_timer = { }; MACHINE_START(LILLY1131, "INCO startec LILLY-1131") - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31_map_io, - .init_irq = mx31_init_irq, - .init_machine = mx31lilly_board_init, - .timer = &mx31lilly_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .timer = &mx31lilly_timer, + .init_machine = mx31lilly_board_init, MACHINE_END - diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c index 9e64c66396e..24a21a384bf 100644 --- a/arch/arm/mach-mx3/mach-mx31lite.c +++ b/arch/arm/mach-mx3/mach-mx31lite.c @@ -27,6 +27,7 @@ #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> #include <linux/mtd/physmap.h> +#include <linux/delay.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -111,9 +112,9 @@ static const struct spi_imx_master spi1_pdata __initconst = { .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), }; -static struct mc13783_platform_data mc13783_pdata __initdata = { - .flags = MC13783_USE_RTC | - MC13783_USE_REGULATOR, +static struct mc13xxx_platform_data mc13783_pdata __initdata = { + .flags = MC13XXX_USE_RTC | + MC13XXX_USE_REGULATOR, }; static struct spi_board_info mc13783_spi_dev __initdata = { @@ -129,7 +130,6 @@ static struct spi_board_info mc13783_spi_dev __initdata = { * USB */ -#if defined(CONFIG_USB_ULPI) #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) @@ -167,15 +167,15 @@ static int usbh2_init(struct platform_device *pdev) gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS"); gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0); - return 0; + mdelay(10); + + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); } static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .init = usbh2_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED, }; -#endif /* * NOR flash @@ -227,7 +227,7 @@ void __init mx31lite_map_io(void) static int mx31lite_baseboard; core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444); -static void __init mxc_board_init(void) +static void __init mx31lite_init(void) { int ret; @@ -252,13 +252,11 @@ static void __init mxc_board_init(void) imx31_add_spi_imx1(&spi1_pdata); spi_register_board_info(&mc13783_spi_dev, 1); -#if defined(CONFIG_USB_ULPI) /* USB */ - usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - - imx31_add_mxc_ehci_hs(2, &usbh2_pdata); -#endif + usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (usbh2_pdata.otg) + imx31_add_mxc_ehci_hs(2, &usbh2_pdata); /* SMSC9117 IRQ pin */ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq"); @@ -281,9 +279,10 @@ struct sys_timer mx31lite_timer = { MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31lite_map_io, - .init_irq = mx31_init_irq, - .init_machine = mxc_board_init, - .timer = &mx31lite_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx31lite_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .timer = &mx31lite_timer, + .init_machine = mx31lite_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c index 1aa8d65fccb..6f3692bccb8 100644 --- a/arch/arm/mach-mx3/mach-mx31moboard.c +++ b/arch/arm/mach-mx3/mach-mx31moboard.c @@ -214,7 +214,7 @@ static struct regulator_init_data cam_vreg_data = { .consumer_supplies = cam_consumers, }; -static struct mc13783_regulator_init_data moboard_regulators[] = { +static struct mc13xxx_regulator_init_data moboard_regulators[] = { { .id = MC13783_REG_VMMC1, .init_data = &sdhc_vreg_data, @@ -267,12 +267,12 @@ static struct mc13783_leds_platform_data moboard_leds = { .tc2_period = MC13783_LED_PERIOD_10MS, }; -static struct mc13783_platform_data moboard_pmic = { +static struct mc13xxx_platform_data moboard_pmic = { .regulators = moboard_regulators, .num_regulators = ARRAY_SIZE(moboard_regulators), .leds = &moboard_leds, - .flags = MC13783_USE_REGULATOR | MC13783_USE_RTC | - MC13783_USE_ADC | MC13783_USE_LED, + .flags = MC13XXX_USE_REGULATOR | MC13XXX_USE_RTC | + MC13XXX_USE_ADC | MC13XXX_USE_LED, }; static struct spi_board_info moboard_spi_board_info[] __initdata = { @@ -400,19 +400,24 @@ static void usb_xcvr_reset(void) mdelay(1); } -#if defined(CONFIG_USB_ULPI) +static int moboard_usbh2_init_hw(struct platform_device *pdev) +{ + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); +} static struct mxc_usbh_platform_data usbh2_pdata __initdata = { + .init = moboard_usbh2_init_hw, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED, }; static int __init moboard_usbh2_init(void) { struct platform_device *pdev; - usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); + usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (!usbh2_pdata.otg) + return -ENODEV; pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata); if (IS_ERR(pdev)) @@ -420,10 +425,6 @@ static int __init moboard_usbh2_init(void) return 0; } -#else -static inline int moboard_usbh2_init(void) { return 0; } -#endif - static struct gpio_led mx31moboard_leds[] = { { @@ -503,7 +504,7 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444); /* * Board specific initialization. */ -static void __init mxc_board_init(void) +static void __init mx31moboard_init(void) { mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins), "moboard"); @@ -564,10 +565,10 @@ struct sys_timer mx31moboard_timer = { MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") /* Maintainer: Valentin Longchamp, EPFL Mobots group */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31_map_io, - .init_irq = mx31_init_irq, - .init_machine = mxc_board_init, - .timer = &mx31moboard_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .timer = &mx31moboard_timer, + .init_machine = mx31moboard_init, MACHINE_END - diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c index b1963f257c2..ff5fe231b8d 100644 --- a/arch/arm/mach-mx3/mach-mx35_3ds.c +++ b/arch/arm/mach-mx3/mach-mx35_3ds.c @@ -118,24 +118,42 @@ static iomux_v3_cfg_t mx35pdk_pads[] = { MX35_PAD_SD1_DATA1__ESDHC1_DAT1, MX35_PAD_SD1_DATA2__ESDHC1_DAT2, MX35_PAD_SD1_DATA3__ESDHC1_DAT3, + /* I2C1 */ + MX35_PAD_I2C1_CLK__I2C1_SCL, + MX35_PAD_I2C1_DAT__I2C1_SDA, }; +static int mx35_3ds_otg_init(struct platform_device *pdev) +{ + return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY); +} + /* OTG config */ static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_UTMI_WIDE, + .workaround = FLS_USB2_WORKAROUND_ENGCM09152, +/* + * ENGCM09152 also requires a hardware change. + * Please check the MX35 Chip Errata document for details. + */ }; static struct mxc_usbh_platform_data otg_pdata __initdata = { + .init = mx35_3ds_otg_init, .portsc = MXC_EHCI_MODE_UTMI, - .flags = MXC_EHCI_INTERNAL_PHY, }; +static int mx35_3ds_usbh_init(struct platform_device *pdev) +{ + return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI | + MXC_EHCI_INTERNAL_PHY); +} + /* USB HOST config */ static const struct mxc_usbh_platform_data usb_host_pdata __initconst = { + .init = mx35_3ds_usbh_init, .portsc = MXC_EHCI_MODE_SERIAL, - .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | - MXC_EHCI_INTERNAL_PHY, }; static int otg_mode_host; @@ -153,10 +171,14 @@ static int __init mx35_3ds_otg_mode(char *options) } __setup("otg_mode=", mx35_3ds_otg_mode); +static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = { + .bitrate = 100000, +}; + /* * Board specific initialization. */ -static void __init mxc_board_init(void) +static void __init mx35_3ds_init(void) { mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); @@ -180,6 +202,7 @@ static void __init mxc_board_init(void) if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT)) pr_warn("Init of the debugboard failed, all " "devices on the debugboard are unusable.\n"); + imx35_add_imx_i2c0(&mx35_3ds_i2c0_data); } static void __init mx35pdk_timer_init(void) @@ -193,9 +216,10 @@ struct sys_timer mx35pdk_timer = { MACHINE_START(MX35_3DS, "Freescale MX35PDK") /* Maintainer: Freescale Semiconductor, Inc */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx35_map_io, - .init_irq = mx35_init_irq, - .init_machine = mxc_board_init, - .timer = &mx35pdk_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx35_map_io, + .init_early = imx35_init_early, + .init_irq = mx35_init_irq, + .timer = &mx35pdk_timer, + .init_machine = mx35_3ds_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c index b752f6bc20a..f07d3bded67 100644 --- a/arch/arm/mach-mx3/mach-pcm037.c +++ b/arch/arm/mach-mx3/mach-pcm037.c @@ -533,17 +533,25 @@ static struct platform_device pcm970_sja1000 = { .num_resources = ARRAY_SIZE(pcm970_sja1000_resources), }; -#if defined(CONFIG_USB_ULPI) +static int pcm037_otg_init(struct platform_device *pdev) +{ + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} + static struct mxc_usbh_platform_data otg_pdata __initdata = { + .init = pcm037_otg_init, .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; +static int pcm037_usbh2_init(struct platform_device *pdev) +{ + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} + static struct mxc_usbh_platform_data usbh2_pdata __initdata = { + .init = pcm037_usbh2_init, .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; -#endif static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, @@ -568,7 +576,7 @@ __setup("otg_mode=", pcm037_otg_mode); /* * Board specific initialization. */ -static void __init mxc_board_init(void) +static void __init pcm037_init(void) { int ret; @@ -646,19 +654,18 @@ static void __init mxc_board_init(void) platform_device_register(&pcm970_sja1000); -#if defined(CONFIG_USB_ULPI) if (otg_mode_host) { - otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - - imx31_add_mxc_ehci_otg(&otg_pdata); + otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (otg_pdata.otg) + imx31_add_mxc_ehci_otg(&otg_pdata); } - usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); + usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (usbh2_pdata.otg) + imx31_add_mxc_ehci_hs(2, &usbh2_pdata); - imx31_add_mxc_ehci_hs(2, &usbh2_pdata); -#endif if (!otg_mode_host) imx31_add_fsl_usb2_udc(&otg_device_pdata); @@ -675,9 +682,10 @@ struct sys_timer pcm037_timer = { MACHINE_START(PCM037, "Phytec Phycore pcm037") /* Maintainer: Pengutronix */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31_map_io, - .init_irq = mx31_init_irq, - .init_machine = mxc_board_init, - .timer = &pcm037_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .timer = &pcm037_timer, + .init_machine = pcm037_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c index fda56545d2f..df6fb07d037 100644 --- a/arch/arm/mach-mx3/mach-pcm037_eet.c +++ b/arch/arm/mach-mx3/mach-pcm037_eet.c @@ -180,9 +180,7 @@ static int __init eet_init_devices(void) /* SPI */ spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev)); -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) imx31_add_spi_imx0(&pcm037_spi1_pdata); -#endif platform_device_register(&pcm037_gpio_keys_device); diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c index bcf83fc7e70..b3ecfb22d24 100644 --- a/arch/arm/mach-mx3/mach-pcm043.c +++ b/arch/arm/mach-mx3/mach-pcm043.c @@ -115,7 +115,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = { .bitrate = 50000, }; @@ -134,7 +133,6 @@ static struct i2c_board_info pcm043_i2c_devices[] = { I2C_BOARD_INFO("pcf8563", 0x51), } }; -#endif static struct platform_device *devices[] __initdata = { &pcm043_flash, @@ -221,9 +219,9 @@ static iomux_v3_cfg_t pcm043_pads[] = { MX35_PAD_SD1_DATA3__ESDHC1_DAT3, }; -#define AC97_GPIO_TXFS (1 * 32 + 31) -#define AC97_GPIO_TXD (1 * 32 + 28) -#define AC97_GPIO_RESET (1 * 32 + 0) +#define AC97_GPIO_TXFS IMX_GPIO_NR(2, 31) +#define AC97_GPIO_TXD IMX_GPIO_NR(2, 28) +#define AC97_GPIO_RESET IMX_GPIO_NR(2, 0) static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97) { @@ -307,18 +305,26 @@ pcm037_nand_board_info __initconst = { .hw_ecc = 1, }; -#if defined(CONFIG_USB_ULPI) +static int pcm043_otg_init(struct platform_device *pdev) +{ + return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} + static struct mxc_usbh_platform_data otg_pdata __initdata = { + .init = pcm043_otg_init, .portsc = MXC_EHCI_MODE_UTMI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; +static int pcm043_usbh1_init(struct platform_device *pdev) +{ + return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI | + MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN); +} + static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { + .init = pcm043_usbh1_init, .portsc = MXC_EHCI_MODE_SERIAL, - .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | - MXC_EHCI_IPPUE_DOWN, }; -#endif static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, @@ -343,7 +349,7 @@ __setup("otg_mode=", pcm043_otg_mode); /* * Board specific initialization. */ -static void __init mxc_board_init(void) +static void __init pcm043_init(void) { mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); @@ -369,26 +375,22 @@ static void __init mxc_board_init(void) imx35_add_imx_uart1(&uart_pdata); -#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE i2c_register_board_info(0, pcm043_i2c_devices, ARRAY_SIZE(pcm043_i2c_devices)); imx35_add_imx_i2c0(&pcm043_i2c0_data); -#endif mxc_register_device(&mx3_ipu, &mx3_ipu_data); mxc_register_device(&mx3_fb, &mx3fb_pdata); -#if defined(CONFIG_USB_ULPI) if (otg_mode_host) { - otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - - imx35_add_mxc_ehci_otg(&otg_pdata); + otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (otg_pdata.otg) + imx35_add_mxc_ehci_otg(&otg_pdata); } - imx35_add_mxc_ehci_hs(&usbh1_pdata); -#endif + if (!otg_mode_host) imx35_add_fsl_usb2_udc(&otg_device_pdata); @@ -407,10 +409,10 @@ struct sys_timer pcm043_timer = { MACHINE_START(PCM043, "Phytec Phycore pcm043") /* Maintainer: Pengutronix */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx35_map_io, - .init_irq = mx35_init_irq, - .init_machine = mxc_board_init, - .timer = &pcm043_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx35_map_io, + .init_early = imx35_init_early, + .init_irq = mx35_init_irq, + .timer = &pcm043_timer, + .init_machine = pcm043_init, MACHINE_END - diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c index fd1050c4096..17f758b7762 100644 --- a/arch/arm/mach-mx3/mach-qong.c +++ b/arch/arm/mach-mx3/mach-qong.c @@ -54,10 +54,6 @@ #define QONG_FPGA_IRQ IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1) -/* - * This file contains the board-specific initialization routines. - */ - static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -247,7 +243,7 @@ static void __init qong_init_fpga(void) /* * Board specific initialization. */ -static void __init mxc_board_init(void) +static void __init qong_init(void) { mxc_init_imx_uart(); qong_init_nor_mtd(); @@ -263,16 +259,12 @@ static struct sys_timer qong_timer = { .init = qong_timer_init, }; -/* - * The following uses standard kernel macros defined in arch.h in order to - * initialize __mach_desc_QONG data structure. - */ - MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") /* Maintainer: DENX Software Engineering GmbH */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31_map_io, - .init_irq = mx31_init_irq, - .init_machine = mxc_board_init, - .timer = &qong_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .timer = &qong_timer, + .init_machine = qong_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-vpr200.c b/arch/arm/mach-mx3/mach-vpr200.c new file mode 100644 index 00000000000..2cf390fbd98 --- /dev/null +++ b/arch/arm/mach-mx3/mach-vpr200.c @@ -0,0 +1,328 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix + * Copyright 2010 Creative Product Design + * + * Derived from mx35 3stack. + * Original author: Fabio Estevam <fabio.estevam@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/memory.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/iomux-mx35.h> +#include <mach/irqs.h> +#include <mach/ipu.h> +#include <mach/mx3fb.h> + +#include <linux/i2c.h> +#include <linux/i2c/at24.h> +#include <linux/mfd/mc13xxx.h> +#include <linux/gpio_keys.h> + +#include "devices-imx35.h" +#include "devices.h" + +#define GPIO_LCDPWR IMX_GPIO_NR(1, 2) +#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0) + +#define GPIO_BUTTON1 IMX_GPIO_NR(1, 4) +#define GPIO_BUTTON2 IMX_GPIO_NR(1, 5) +#define GPIO_BUTTON3 IMX_GPIO_NR(1, 7) +#define GPIO_BUTTON4 IMX_GPIO_NR(1, 8) +#define GPIO_BUTTON5 IMX_GPIO_NR(1, 9) +#define GPIO_BUTTON6 IMX_GPIO_NR(1, 10) +#define GPIO_BUTTON7 IMX_GPIO_NR(1, 11) +#define GPIO_BUTTON8 IMX_GPIO_NR(1, 12) + +static const struct fb_videomode fb_modedb[] = { + { + /* 800x480 @ 60 Hz */ + .name = "PT0708048", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = KHZ2PICOS(33260), + .left_margin = 50, + .right_margin = 156, + .upper_margin = 10, + .lower_margin = 10, + .hsync_len = 1, /* note: DE only display */ + .vsync_len = 1, /* note: DE only display */ + .sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* 800x480 @ 60 Hz */ + .name = "CTP-CLAA070LC0ACW", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = KHZ2PICOS(27000), + .left_margin = 50, + .right_margin = 50, /* whole line should have 900 clocks */ + .upper_margin = 10, + .lower_margin = 10, /* whole frame should have 500 lines */ + .hsync_len = 1, /* note: DE only display */ + .vsync_len = 1, /* note: DE only display */ + .sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + } +}; + +static struct ipu_platform_data mx3_ipu_data = { + .irq_base = MXC_IPU_IRQ_START, +}; + +static struct mx3fb_platform_data mx3fb_pdata = { + .dma_dev = &mx3_ipu.dev, + .name = "PT0708048", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), +}; + +static struct physmap_flash_data vpr200_flash_data = { + .width = 2, +}; + +static struct resource vpr200_flash_resource = { + .start = MX35_CS0_BASE_ADDR, + .end = MX35_CS0_BASE_ADDR + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device vpr200_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &vpr200_flash_data, + }, + .resource = &vpr200_flash_resource, + .num_resources = 1, +}; + +static const struct mxc_nand_platform_data + vpr200_nand_board_info __initconst = { + .width = 1, + .hw_ecc = 1, + .flash_bbt = 1, +}; + +#define VPR_KEY_DEBOUNCE 500 +static struct gpio_keys_button vpr200_gpio_keys_table[] = { + {KEY_F2, GPIO_BUTTON1, 1, "vpr-keys: F2", 0, VPR_KEY_DEBOUNCE}, + {KEY_F3, GPIO_BUTTON2, 1, "vpr-keys: F3", 0, VPR_KEY_DEBOUNCE}, + {KEY_F4, GPIO_BUTTON3, 1, "vpr-keys: F4", 0, VPR_KEY_DEBOUNCE}, + {KEY_F5, GPIO_BUTTON4, 1, "vpr-keys: F5", 0, VPR_KEY_DEBOUNCE}, + {KEY_F6, GPIO_BUTTON5, 1, "vpr-keys: F6", 0, VPR_KEY_DEBOUNCE}, + {KEY_F7, GPIO_BUTTON6, 1, "vpr-keys: F7", 0, VPR_KEY_DEBOUNCE}, + {KEY_F8, GPIO_BUTTON7, 1, "vpr-keys: F8", 1, VPR_KEY_DEBOUNCE}, + {KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE}, +}; + +static struct gpio_keys_platform_data vpr200_gpio_keys_data = { + .buttons = vpr200_gpio_keys_table, + .nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table), +}; + +static struct platform_device vpr200_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &vpr200_gpio_keys_data, + } +}; + +static struct mc13xxx_platform_data vpr200_pmic = { + .flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN, +}; + +static const struct imxi2c_platform_data vpr200_i2c0_data __initconst = { + .bitrate = 50000, +}; + +static struct at24_platform_data vpr200_eeprom = { + .byte_len = 2048 / 8, + .page_size = 1, +}; + +static struct i2c_board_info vpr200_i2c_devices[] = { + { + I2C_BOARD_INFO("at24", 0x50), /* E0=0, E1=0, E2=0 */ + .platform_data = &vpr200_eeprom, + }, { + I2C_BOARD_INFO("mc13892", 0x08), + .platform_data = &vpr200_pmic, + .irq = gpio_to_irq(GPIO_PMIC_INT), + } +}; + +static iomux_v3_cfg_t vpr200_pads[] = { + /* UART1 */ + MX35_PAD_TXD1__UART1_TXD_MUX, + MX35_PAD_RXD1__UART1_RXD_MUX, + /* UART3 */ + MX35_PAD_ATA_DATA10__UART3_RXD_MUX, + MX35_PAD_ATA_DATA11__UART3_TXD_MUX, + /* FEC */ + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, + MX35_PAD_FEC_RX_DV__FEC_RX_DV, + MX35_PAD_FEC_COL__FEC_COL, + MX35_PAD_FEC_RDATA0__FEC_RDATA_0, + MX35_PAD_FEC_TDATA0__FEC_TDATA_0, + MX35_PAD_FEC_TX_EN__FEC_TX_EN, + MX35_PAD_FEC_MDC__FEC_MDC, + MX35_PAD_FEC_MDIO__FEC_MDIO, + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, + MX35_PAD_FEC_CRS__FEC_CRS, + MX35_PAD_FEC_RDATA1__FEC_RDATA_1, + MX35_PAD_FEC_TDATA1__FEC_TDATA_1, + MX35_PAD_FEC_RDATA2__FEC_RDATA_2, + MX35_PAD_FEC_TDATA2__FEC_TDATA_2, + MX35_PAD_FEC_RDATA3__FEC_RDATA_3, + MX35_PAD_FEC_TDATA3__FEC_TDATA_3, + /* Display */ + MX35_PAD_LD0__IPU_DISPB_DAT_0, + MX35_PAD_LD1__IPU_DISPB_DAT_1, + MX35_PAD_LD2__IPU_DISPB_DAT_2, + MX35_PAD_LD3__IPU_DISPB_DAT_3, + MX35_PAD_LD4__IPU_DISPB_DAT_4, + MX35_PAD_LD5__IPU_DISPB_DAT_5, + MX35_PAD_LD6__IPU_DISPB_DAT_6, + MX35_PAD_LD7__IPU_DISPB_DAT_7, + MX35_PAD_LD8__IPU_DISPB_DAT_8, + MX35_PAD_LD9__IPU_DISPB_DAT_9, + MX35_PAD_LD10__IPU_DISPB_DAT_10, + MX35_PAD_LD11__IPU_DISPB_DAT_11, + MX35_PAD_LD12__IPU_DISPB_DAT_12, + MX35_PAD_LD13__IPU_DISPB_DAT_13, + MX35_PAD_LD14__IPU_DISPB_DAT_14, + MX35_PAD_LD15__IPU_DISPB_DAT_15, + MX35_PAD_LD16__IPU_DISPB_DAT_16, + MX35_PAD_LD17__IPU_DISPB_DAT_17, + MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, + MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, + MX35_PAD_CONTRAST__IPU_DISPB_CONTR, + /* LCD Enable */ + MX35_PAD_D3_VSYNC__GPIO1_2, + /* USBOTG */ + MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR, + MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC, + /* SDCARD */ + MX35_PAD_SD1_CMD__ESDHC1_CMD, + MX35_PAD_SD1_CLK__ESDHC1_CLK, + MX35_PAD_SD1_DATA0__ESDHC1_DAT0, + MX35_PAD_SD1_DATA1__ESDHC1_DAT1, + MX35_PAD_SD1_DATA2__ESDHC1_DAT2, + MX35_PAD_SD1_DATA3__ESDHC1_DAT3, + /* PMIC */ + MX35_PAD_GPIO2_0__GPIO2_0, + /* GPIO keys */ + MX35_PAD_SCKR__GPIO1_4, + MX35_PAD_COMPARE__GPIO1_5, + MX35_PAD_SCKT__GPIO1_7, + MX35_PAD_FST__GPIO1_8, + MX35_PAD_HCKT__GPIO1_9, + MX35_PAD_TX5_RX0__GPIO1_10, + MX35_PAD_TX4_RX1__GPIO1_11, + MX35_PAD_TX3_RX2__GPIO1_12, +}; + +/* USB Device config */ +static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_UTMI, + .workaround = FLS_USB2_WORKAROUND_ENGCM09152, +}; + +/* USB HOST config */ +static const struct mxc_usbh_platform_data usb_host_pdata __initconst = { + .portsc = MXC_EHCI_MODE_SERIAL, + .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | + MXC_EHCI_INTERNAL_PHY, +}; + +static struct platform_device *devices[] __initdata = { + &vpr200_flash, + &vpr200_device_gpiokeys, +}; + +/* + * Board specific initialization. + */ +static void __init vpr200_board_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads)); + + imx35_add_fec(NULL); + imx35_add_imx2_wdt(NULL); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + if (0 != gpio_request(GPIO_LCDPWR, "LCDPWR")) + printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n"); + else + gpio_direction_output(GPIO_LCDPWR, 0); + + if (0 != gpio_request(GPIO_PMIC_INT, "PMIC_INT")) + printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n"); + else + gpio_direction_input(GPIO_PMIC_INT); + + imx35_add_imx_uart0(NULL); + imx35_add_imx_uart2(NULL); + + mxc_register_device(&mx3_ipu, &mx3_ipu_data); + mxc_register_device(&mx3_fb, &mx3fb_pdata); + + imx35_add_fsl_usb2_udc(&otg_device_pdata); + imx35_add_mxc_ehci_hs(&usb_host_pdata); + + imx35_add_mxc_nand(&vpr200_nand_board_info); + imx35_add_sdhci_esdhc_imx(0, NULL); + + i2c_register_board_info(0, vpr200_i2c_devices, + ARRAY_SIZE(vpr200_i2c_devices)); + + imx35_add_imx_i2c0(&vpr200_i2c0_data); +} + +static void __init vpr200_timer_init(void) +{ + mx35_clocks_init(); +} + +struct sys_timer vpr200_timer = { + .init = vpr200_timer_init, +}; + +MACHINE_START(VPR200, "VPR200") + /* Maintainer: Creative Product Design */ + .map_io = mx35_map_io, + .init_early = imx35_init_early, + .init_irq = mx35_init_irq, + .timer = &vpr200_timer, + .init_machine = vpr200_board_init, +MACHINE_END diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index 47118f76024..54d7174b420 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -27,14 +27,8 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-v3.h> - -/*! - * @file mm.c - * - * @brief This file creates static virtual to physical mappings, common to all MX3 boards. - * - * @ingroup Memory - */ +#include <mach/gpio.h> +#include <mach/irqs.h> #ifdef CONFIG_SOC_IMX31 static struct map_desc mx31_io_desc[] __initdata = { @@ -52,17 +46,25 @@ static struct map_desc mx31_io_desc[] __initdata = { */ void __init mx31_map_io(void) { + iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc)); +} + +void __init imx31_init_early(void) +{ mxc_set_cpu_type(MXC_CPU_MX31); mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); - - iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc)); } -int imx31_register_gpios(void); +static struct mxc_gpio_port imx31_gpio_ports[] = { + DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1), + DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2), + DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3), +}; + void __init mx31_init_irq(void) { mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR)); - imx31_register_gpios(); + mxc_gpio_init(imx31_gpio_ports, ARRAY_SIZE(imx31_gpio_ports)); } #endif /* ifdef CONFIG_SOC_IMX31 */ @@ -77,18 +79,26 @@ static struct map_desc mx35_io_desc[] __initdata = { void __init mx35_map_io(void) { + iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc)); +} + +void __init imx35_init_early(void) +{ mxc_set_cpu_type(MXC_CPU_MX35); mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); - - iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc)); } -int imx35_register_gpios(void); +static struct mxc_gpio_port imx35_gpio_ports[] = { + DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1), + DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2), + DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3), +}; + void __init mx35_init_irq(void) { mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); - imx35_register_gpios(); + mxc_gpio_init(imx35_gpio_ports, ARRAY_SIZE(imx35_gpio_ports)); } #endif /* ifdef CONFIG_SOC_IMX35 */ @@ -129,4 +139,3 @@ static int mxc_init_l2x0(void) arch_initcall(mxc_init_l2x0); #endif - diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index 94a0b9e4b7f..6410b9c48a0 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -15,6 +15,7 @@ #include <linux/gpio.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/delay.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/types.h> @@ -149,7 +150,10 @@ static int devboard_usbh1_hw_init(struct platform_device *pdev) mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG); mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG); - return 0; + mdelay(10); + + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_INTERFACE_SINGLE_UNI); } #define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B) @@ -187,7 +191,6 @@ static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on) static struct mxc_usbh_platform_data usbh1_pdata __initdata = { .init = devboard_usbh1_hw_init, .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, - .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI, }; static int __init devboard_usbh1_init(void) diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index f449a97ae1a..57f7b00cb70 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -265,7 +265,10 @@ static int marxbot_usbh1_hw_init(struct platform_device *pdev) mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG); mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG); - return 0; + mdelay(10); + + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_INTERFACE_SINGLE_UNI); } #define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B) @@ -303,7 +306,6 @@ static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on) static struct mxc_usbh_platform_data usbh1_pdata __initdata = { .init = marxbot_usbh1_hw_init, .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, - .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI, }; static int __init marxbot_usbh1_init(void) diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c index bbec3c82264..35f806e737c 100644 --- a/arch/arm/mach-mx3/mx31moboard-smartbot.c +++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c @@ -123,17 +123,24 @@ static const struct fsl_usb2_platform_data usb_pdata __initconst = { #if defined(CONFIG_USB_ULPI) +static int smartbot_otg_init(struct platform_device *pdev) +{ + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); +} + static struct mxc_usbh_platform_data otg_host_pdata __initdata = { + .init = smartbot_otg_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED, }; static int __init smartbot_otg_host_init(void) { struct platform_device *pdev; - otg_host_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); + otg_host_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (!otg_host_pdata.otg) + return -ENODEV; pdev = imx31_add_mxc_ehci_otg(&otg_host_pdata); if (IS_ERR(pdev)) diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index de4fa992fc3..83ee08847d4 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -1,5 +1,6 @@ if ARCH_MX5 -# ARCH_MX51 and ARCH_MX50 are left for compatibility +# ARCH_MX50/51/53 are left to mark places where prevent multi-soc in single +# image. So for most time, SOC_IMX50/51/53 should be used. config ARCH_MX50 bool @@ -50,6 +51,7 @@ config MACH_MX51_BABBAGE config MACH_MX51_3DS bool "Support MX51PDK (3DS)" select SOC_IMX51 + select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX @@ -112,19 +114,32 @@ config MACH_EUKREA_MBIMXSD51_BASEBOARD endchoice -config MACH_MX51_EFIKAMX - bool "Support MX51 Genesi Efika MX nettop" +config MX51_EFIKA_COMMON + bool select SOC_IMX51 select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_ULPI if USB_ULPI + +config MACH_MX51_EFIKAMX + bool "Support MX51 Genesi Efika MX nettop" + select MX51_EFIKA_COMMON help Include support for Genesi Efika MX nettop. This includes specific configurations for the board and its peripherals. +config MACH_MX51_EFIKASB + bool "Support MX51 Genesi Efika Smartbook" + select MX51_EFIKA_COMMON + help + Include support for Genesi Efika Smartbook. This includes specific + configurations for the board and its peripherals. + config MACH_MX53_EVK bool "Support MX53 EVK platforms" select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX @@ -136,6 +151,8 @@ config MACH_MX53_EVK config MACH_MX53_SMD bool "Support MX53 SMD platforms" select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART help Include support for MX53 SMD platform. This includes specific @@ -144,7 +161,10 @@ config MACH_MX53_SMD config MACH_MX53_LOCO bool "Support MX53 LOCO platforms" select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX help Include support for MX53 LOCO platform. This includes specific configurations for the board and its peripherals. @@ -157,6 +177,7 @@ config MACH_MX50_RDP select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX + select IMX_HAVE_PLATFORM_FEC help Include support for MX50 reference design platform (RDP) board. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile index 0d43be98e51..4f63048be3c 100644 --- a/arch/arm/mach-mx5/Makefile +++ b/arch/arm/mach-mx5/Makefile @@ -3,7 +3,7 @@ # # Object file lists. -obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o +obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o obj-$(CONFIG_SOC_IMX50) += mm-mx50.o obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o @@ -16,5 +16,7 @@ obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o +obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o +obj-$(CONFIG_MACH_MX51_EFIKASB) += board-mx51_efikasb.o obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index f8652ef25f8..d0296a94c47 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -60,7 +60,6 @@ #define MX51_USB_PLL_DIV_19_2_MHZ 0x01 #define MX51_USB_PLL_DIV_24_MHZ 0x02 -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) static struct plat_serial8250_port serial_platform_data[] = { { .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000), @@ -105,12 +104,9 @@ static struct platform_device serial_device = { .platform_data = serial_platform_data, }, }; -#endif static struct platform_device *devices[] __initdata = { -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) &serial_device, -#endif }; static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = { @@ -188,7 +184,10 @@ static int initialize_otg_port(struct platform_device *pdev) v |= MX51_USB_PLL_DIV_19_2_MHZ; __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); iounmap(usb_base); - return 0; + + mdelay(10); + + return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY); } static int initialize_usbh1_port(struct platform_device *pdev) @@ -206,13 +205,16 @@ static int initialize_usbh1_port(struct platform_device *pdev) v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET); __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET); iounmap(usb_base); - return 0; + + mdelay(10); + + return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_ITC_NO_THRESHOLD); } static struct mxc_usbh_platform_data dr_utmi_config = { .init = initialize_otg_port, .portsc = MXC_EHCI_UTMI_16BIT, - .flags = MXC_EHCI_INTERNAL_PHY, }; static struct fsl_usb2_platform_data usb_pdata = { @@ -223,7 +225,6 @@ static struct fsl_usb2_platform_data usb_pdata = { static struct mxc_usbh_platform_data usbh1_config = { .init = initialize_usbh1_port, .portsc = MXC_EHCI_MODE_ULPI, - .flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD), }; static int otg_mode_host; @@ -298,7 +299,8 @@ MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module") /* Maintainer: Eric Bénard <eric@eukrea.com> */ .boot_params = MX51_PHYS_OFFSET + 0x100, .map_io = mx51_map_io, + .init_early = imx51_init_early, .init_irq = mx51_init_irq, - .init_machine = eukrea_cpuimx51_init, .timer = &mxc_timer, + .init_machine = eukrea_cpuimx51_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c index ad931895d8b..29b180823bf 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-mx5/board-cpuimx51sd.c @@ -42,6 +42,7 @@ #include "devices-imx51.h" #include "devices.h" +#include "cpu_op-mx51.h" #define USBH1_RST IMX_GPIO_NR(2, 28) #define ETH_RST IMX_GPIO_NR(2, 31) @@ -109,7 +110,7 @@ static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = { /* Touchscreen */ /* IRQ */ - _MX51_PAD_CSI1_D8__GPIO3_12 | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP | + _MX51_PAD_GPIO_NAND__GPIO_NAND | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP | PAD_CTL_PKE | PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS), }; @@ -118,15 +119,9 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static int ts_get_pendown_state(void) -{ - return gpio_get_value(TSC2007_IRQGPIO) ? 0 : 1; -} - static struct tsc2007_platform_data tsc2007_info = { .model = 2007, .x_plate_ohms = 180, - .get_pendown_state = ts_get_pendown_state, }; static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = { @@ -167,7 +162,10 @@ static int initialize_otg_port(struct platform_device *pdev) v |= MX51_USB_PLL_DIV_19_2_MHZ; __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); iounmap(usb_base); - return 0; + + mdelay(10); + + return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY); } static int initialize_usbh1_port(struct platform_device *pdev) @@ -186,13 +184,16 @@ static int initialize_usbh1_port(struct platform_device *pdev) __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET); iounmap(usb_base); - return 0; + + mdelay(10); + + return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_ITC_NO_THRESHOLD); } static struct mxc_usbh_platform_data dr_utmi_config = { .init = initialize_otg_port, .portsc = MXC_EHCI_UTMI_16BIT, - .flags = MXC_EHCI_INTERNAL_PHY, }; static struct fsl_usb2_platform_data usb_pdata = { @@ -203,7 +204,6 @@ static struct fsl_usb2_platform_data usb_pdata = { static struct mxc_usbh_platform_data usbh1_config = { .init = initialize_usbh1_port, .portsc = MXC_EHCI_MODE_ULPI, - .flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD), }; static int otg_mode_host; @@ -242,7 +242,7 @@ static struct mcp251x_platform_data mcp251x_info = { static struct spi_board_info cpuimx51sd_spi_device[] = { { .modalias = "mcp2515", - .max_speed_hz = 6500000, + .max_speed_hz = 10000000, .bus_num = 0, .mode = SPI_MODE_0, .chip_select = 0, @@ -269,6 +269,10 @@ static void __init eukrea_cpuimx51sd_init(void) mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads, ARRAY_SIZE(eukrea_cpuimx51sd_pads)); +#if defined(CONFIG_CPU_FREQ_IMX) + get_cpu_op = mx51_get_cpu_op; +#endif + imx51_add_imx_uart(0, &uart_pdata); imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info); @@ -329,7 +333,8 @@ MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD") /* Maintainer: Eric Bénard <eric@eukrea.com> */ .boot_params = MX51_PHYS_OFFSET + 0x100, .map_io = mx51_map_io, + .init_early = imx51_init_early, .init_irq = mx51_init_irq, - .init_machine = eukrea_cpuimx51sd_init, .timer = &mxc_timer, + .init_machine = eukrea_cpuimx51sd_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c index fd32e4c450e..dedf7f2d6d0 100644 --- a/arch/arm/mach-mx5/board-mx50_rdp.c +++ b/arch/arm/mach-mx5/board-mx50_rdp.c @@ -35,7 +35,10 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include "devices-mx50.h" +#include "devices-imx50.h" + +#define FEC_EN IMX_GPIO_NR(6, 23) +#define FEC_RESET_B IMX_GPIO_NR(4, 12) static iomux_v3_cfg_t mx50_rdp_pads[] __initdata = { /* SD1 */ @@ -102,7 +105,7 @@ static iomux_v3_cfg_t mx50_rdp_pads[] __initdata = { MX50_PAD_I2C3_SCL__USBOTG_OC, MX50_PAD_SSI_RXC__FEC_MDIO, - MX50_PAD_SSI_RXC__FEC_MDIO, + MX50_PAD_SSI_RXFS__FEC_MDC, MX50_PAD_DISP_D0__FEC_TXCLK, MX50_PAD_DISP_D1__FEC_RX_ER, MX50_PAD_DISP_D2__FEC_RX_DV, @@ -111,7 +114,6 @@ static iomux_v3_cfg_t mx50_rdp_pads[] __initdata = { MX50_PAD_DISP_D5__FEC_TX_EN, MX50_PAD_DISP_D6__FEC_TXD1, MX50_PAD_DISP_D7__FEC_TXD0, - MX50_PAD_SSI_RXFS__FEC_MDC, MX50_PAD_I2C3_SDA__GPIO_6_23, MX50_PAD_ECSPI1_SCLK__GPIO_4_12, @@ -168,6 +170,24 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; +static const struct fec_platform_data fec_data __initconst = { + .phy = PHY_INTERFACE_MODE_RMII, +}; + +static inline void mx50_rdp_fec_reset(void) +{ + gpio_request(FEC_EN, "fec-en"); + gpio_direction_output(FEC_EN, 0); + gpio_request(FEC_RESET_B, "fec-reset_b"); + gpio_direction_output(FEC_RESET_B, 0); + msleep(1); + gpio_set_value(FEC_RESET_B, 1); +} + +static const struct imxi2c_platform_data i2c_data __initconst = { + .bitrate = 100000, +}; + /* * Board specific initialization. */ @@ -178,6 +198,11 @@ static void __init mx50_rdp_board_init(void) imx50_add_imx_uart(0, &uart_pdata); imx50_add_imx_uart(1, &uart_pdata); + mx50_rdp_fec_reset(); + imx50_add_fec(&fec_data); + imx50_add_imx_i2c(0, &i2c_data); + imx50_add_imx_i2c(1, &i2c_data); + imx50_add_imx_i2c(2, &i2c_data); } static void __init mx50_rdp_timer_init(void) @@ -191,7 +216,8 @@ static struct sys_timer mx50_rdp_timer = { MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform") .map_io = mx50_map_io, + .init_early = imx50_init_early, .init_irq = mx50_init_irq, - .init_machine = mx50_rdp_board_init, .timer = &mx50_rdp_timer, + .init_machine = mx50_rdp_board_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index 49d64484237..63dfbeafbc1 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -71,24 +71,10 @@ static iomux_v3_cfg_t mx51_3ds_pads[] = { }; /* Serial ports */ -#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static inline void mxc_init_imx_uart(void) -{ - imx51_add_imx_uart(0, &uart_pdata); - imx51_add_imx_uart(1, &uart_pdata); - imx51_add_imx_uart(2, &uart_pdata); -} -#else /* !SERIAL_IMX */ -static inline void mxc_init_imx_uart(void) -{ -} -#endif /* SERIAL_IMX */ - -#if defined(CONFIG_KEYBOARD_IMX) || defined(CONFIG_KEYBOARD_IMX_MODULE) static int mx51_3ds_board_keymap[] = { KEY(0, 0, KEY_1), KEY(0, 1, KEY_2), @@ -124,16 +110,6 @@ static const struct matrix_keymap_data mx51_3ds_map_data __initconst = { .keymap_size = ARRAY_SIZE(mx51_3ds_board_keymap), }; -static void mxc_init_keypad(void) -{ - imx51_add_imx_keypad(&mx51_3ds_map_data); -} -#else -static inline void mxc_init_keypad(void) -{ -} -#endif - static int mx51_3ds_spi2_cs[] = { MXC_SPI_CS(0), MX51_3DS_ECSPI2_CS, @@ -157,11 +133,14 @@ static struct spi_board_info mx51_3ds_spi_nor_device[] = { /* * Board specific initialization. */ -static void __init mxc_board_init(void) +static void __init mx51_3ds_init(void) { mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads, ARRAY_SIZE(mx51_3ds_pads)); - mxc_init_imx_uart(); + + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(2, &uart_pdata); imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata); spi_register_board_info(mx51_3ds_spi_nor_device, @@ -172,7 +151,8 @@ static void __init mxc_board_init(void) "devices on the board are unusable.\n"); imx51_add_sdhci_esdhc_imx(0, NULL); - mxc_init_keypad(); + imx51_add_imx_keypad(&mx51_3ds_map_data); + imx51_add_imx2_wdt(0, NULL); } static void __init mx51_3ds_timer_init(void) @@ -180,15 +160,16 @@ static void __init mx51_3ds_timer_init(void) mx51_clocks_init(32768, 24000000, 22579200, 0); } -static struct sys_timer mxc_timer = { - .init = mx51_3ds_timer_init, +static struct sys_timer mx51_3ds_timer = { + .init = mx51_3ds_timer_init, }; MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board") /* Maintainer: Freescale Semiconductor, Inc. */ .boot_params = MX51_PHYS_OFFSET + 0x100, .map_io = mx51_map_io, + .init_early = imx51_init_early, .init_irq = mx51_init_irq, - .init_machine = mxc_board_init, - .timer = &mxc_timer, + .timer = &mx51_3ds_timer, + .init_machine = mx51_3ds_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 1d231e84107..b2ecd194e76 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -161,23 +161,10 @@ static iomux_v3_cfg_t mx51babbage_pads[] = { }; /* Serial ports */ -#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static inline void mxc_init_imx_uart(void) -{ - imx51_add_imx_uart(0, &uart_pdata); - imx51_add_imx_uart(1, &uart_pdata); - imx51_add_imx_uart(2, &uart_pdata); -} -#else /* !SERIAL_IMX */ -static inline void mxc_init_imx_uart(void) -{ -} -#endif /* SERIAL_IMX */ - static const struct imxi2c_platform_data babbage_i2c_data __initconst = { .bitrate = 100000, }; @@ -272,7 +259,10 @@ static int initialize_otg_port(struct platform_device *pdev) v |= MX51_USB_PLL_DIV_19_2_MHZ; __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); iounmap(usb_base); - return 0; + + mdelay(10); + + return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY); } static int initialize_usbh1_port(struct platform_device *pdev) @@ -290,13 +280,16 @@ static int initialize_usbh1_port(struct platform_device *pdev) v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET); __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET); iounmap(usb_base); - return 0; + + mdelay(10); + + return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_ITC_NO_THRESHOLD); } static struct mxc_usbh_platform_data dr_utmi_config = { .init = initialize_otg_port, .portsc = MXC_EHCI_UTMI_16BIT, - .flags = MXC_EHCI_INTERNAL_PHY, }; static struct fsl_usb2_platform_data usb_pdata = { @@ -307,7 +300,6 @@ static struct fsl_usb2_platform_data usb_pdata = { static struct mxc_usbh_platform_data usbh1_config = { .init = initialize_usbh1_port, .portsc = MXC_EHCI_MODE_ULPI, - .flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD), }; static int otg_mode_host; @@ -349,7 +341,7 @@ static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = { /* * Board specific initialization. */ -static void __init mxc_board_init(void) +static void __init mx51_babbage_init(void) { iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 | @@ -360,7 +352,11 @@ static void __init mxc_board_init(void) #endif mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads, ARRAY_SIZE(mx51babbage_pads)); - mxc_init_imx_uart(); + + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(2, &uart_pdata); + babbage_fec_reset(); imx51_add_fec(NULL); @@ -399,15 +395,16 @@ static void __init mx51_babbage_timer_init(void) mx51_clocks_init(32768, 24000000, 22579200, 0); } -static struct sys_timer mxc_timer = { - .init = mx51_babbage_timer_init, +static struct sys_timer mx51_babbage_timer = { + .init = mx51_babbage_timer_init, }; MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */ .boot_params = MX51_PHYS_OFFSET + 0x100, .map_io = mx51_map_io, + .init_early = imx51_init_early, .init_irq = mx51_init_irq, - .init_machine = mxc_board_init, - .timer = &mxc_timer, + .timer = &mx51_babbage_timer, + .init_machine = mx51_babbage_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index b7946f8e8d4..acab1911cb3 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -25,6 +25,9 @@ #include <linux/fsl_devices.h> #include <linux/spi/flash.h> #include <linux/spi/spi.h> +#include <linux/mfd/mc13892.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/consumer.h> #include <mach/common.h> #include <mach/hardware.h> @@ -40,8 +43,7 @@ #include "devices-imx51.h" #include "devices.h" - -#define MX51_USB_PLL_DIV_24_MHZ 0x01 +#include "efika.h" #define EFIKAMX_PCBID0 IMX_GPIO_NR(3, 16) #define EFIKAMX_PCBID1 IMX_GPIO_NR(3, 17) @@ -53,13 +55,14 @@ #define EFIKAMX_POWER_KEY IMX_GPIO_NR(2, 31) -#define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24) -#define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25) - /* board 1.1 doesn't have same reset gpio */ #define EFIKAMX_RESET1_1 IMX_GPIO_NR(3, 2) #define EFIKAMX_RESET IMX_GPIO_NR(1, 4) +#define EFIKAMX_POWEROFF IMX_GPIO_NR(4, 13) + +#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6) + /* the pci ids pin have pull up. they're driven low according to board id */ #define MX51_PAD_PCBID0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, PAD_CTL_PUS_100K_UP) #define MX51_PAD_PCBID1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, PAD_CTL_PUS_100K_UP) @@ -67,38 +70,11 @@ #define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE) static iomux_v3_cfg_t mx51efikamx_pads[] = { - /* UART1 */ - MX51_PAD_UART1_RXD__UART1_RXD, - MX51_PAD_UART1_TXD__UART1_TXD, - MX51_PAD_UART1_RTS__UART1_RTS, - MX51_PAD_UART1_CTS__UART1_CTS, /* board id */ MX51_PAD_PCBID0, MX51_PAD_PCBID1, MX51_PAD_PCBID2, - /* SD 1 */ - MX51_PAD_SD1_CMD__SD1_CMD, - MX51_PAD_SD1_CLK__SD1_CLK, - MX51_PAD_SD1_DATA0__SD1_DATA0, - MX51_PAD_SD1_DATA1__SD1_DATA1, - MX51_PAD_SD1_DATA2__SD1_DATA2, - MX51_PAD_SD1_DATA3__SD1_DATA3, - - /* SD 2 */ - MX51_PAD_SD2_CMD__SD2_CMD, - MX51_PAD_SD2_CLK__SD2_CLK, - MX51_PAD_SD2_DATA0__SD2_DATA0, - MX51_PAD_SD2_DATA1__SD2_DATA1, - MX51_PAD_SD2_DATA2__SD2_DATA2, - MX51_PAD_SD2_DATA3__SD2_DATA3, - - /* SD/MMC WP/CD */ - MX51_PAD_GPIO1_0__SD1_CD, - MX51_PAD_GPIO1_1__SD1_WP, - MX51_PAD_GPIO1_7__SD2_WP, - MX51_PAD_GPIO1_8__SD2_CD, - /* leds */ MX51_PAD_CSI1_D9__GPIO3_13, MX51_PAD_CSI1_VSYNC__GPIO3_14, @@ -107,64 +83,12 @@ static iomux_v3_cfg_t mx51efikamx_pads[] = { /* power key */ MX51_PAD_PWRKEY, - /* spi */ - MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, - MX51_PAD_CSPI1_MISO__ECSPI1_MISO, - MX51_PAD_CSPI1_SS0__GPIO4_24, - MX51_PAD_CSPI1_SS1__GPIO4_25, - MX51_PAD_CSPI1_RDY__ECSPI1_RDY, - MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, - /* reset */ MX51_PAD_DI1_PIN13__GPIO3_2, MX51_PAD_GPIO1_4__GPIO1_4, -}; -/* Serial ports */ -#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) -static const struct imxuart_platform_data uart_pdata = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static inline void mxc_init_imx_uart(void) -{ - imx51_add_imx_uart(0, &uart_pdata); - imx51_add_imx_uart(1, &uart_pdata); - imx51_add_imx_uart(2, &uart_pdata); -} -#else /* !SERIAL_IMX */ -static inline void mxc_init_imx_uart(void) -{ -} -#endif /* SERIAL_IMX */ - -/* This function is board specific as the bit mask for the plldiv will also - * be different for other Freescale SoCs, thus a common bitmask is not - * possible and cannot get place in /plat-mxc/ehci.c. - */ -static int initialize_otg_port(struct platform_device *pdev) -{ - u32 v; - void __iomem *usb_base; - void __iomem *usbother_base; - usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) - return -ENOMEM; - usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET); - - /* Set the PHY clock to 19.2MHz */ - v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; - v |= MX51_USB_PLL_DIV_24_MHZ; - __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - iounmap(usb_base); - return 0; -} - -static struct mxc_usbh_platform_data dr_utmi_config = { - .init = initialize_otg_port, - .portsc = MXC_EHCI_UTMI_16BIT, - .flags = MXC_EHCI_INTERNAL_PHY, + /* power off */ + MX51_PAD_CSI2_VSYNC__GPIO4_13, }; /* PCBID2 PCBID1 PCBID0 STATE @@ -265,47 +189,6 @@ static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initcon .nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey), }; -static struct mtd_partition mx51_efikamx_spi_nor_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = SZ_256K, - }, - { - .name = "config", - .offset = MTDPART_OFS_APPEND, - .size = SZ_64K, - }, -}; - -static struct flash_platform_data mx51_efikamx_spi_flash_data = { - .name = "spi_flash", - .parts = mx51_efikamx_spi_nor_partitions, - .nr_parts = ARRAY_SIZE(mx51_efikamx_spi_nor_partitions), - .type = "sst25vf032b", -}; - -static struct spi_board_info mx51_efikamx_spi_board_info[] __initdata = { - { - .modalias = "m25p80", - .max_speed_hz = 25000000, - .bus_num = 0, - .chip_select = 1, - .platform_data = &mx51_efikamx_spi_flash_data, - .irq = -1, - }, -}; - -static int mx51_efikamx_spi_cs[] = { - EFIKAMX_SPI_CS0, - EFIKAMX_SPI_CS1, -}; - -static const struct spi_imx_master mx51_efikamx_spi_pdata __initconst = { - .chipselect = mx51_efikamx_spi_cs, - .num_chipselect = ARRAY_SIZE(mx51_efikamx_spi_cs), -}; - void mx51_efikamx_reset(void) { if (system_rev == 0x11) @@ -314,14 +197,53 @@ void mx51_efikamx_reset(void) gpio_direction_output(EFIKAMX_RESET, 0); } -static void __init mxc_board_init(void) +static struct regulator *pwgt1, *pwgt2, *coincell; + +static void mx51_efikamx_power_off(void) +{ + if (!IS_ERR(coincell)) + regulator_disable(coincell); + + if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) { + regulator_disable(pwgt2); + regulator_disable(pwgt1); + } + gpio_direction_output(EFIKAMX_POWEROFF, 1); +} + +static int __init mx51_efikamx_power_init(void) +{ + if (machine_is_mx51_efikamx()) { + pwgt1 = regulator_get(NULL, "pwgt1"); + pwgt2 = regulator_get(NULL, "pwgt2"); + if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) { + regulator_enable(pwgt1); + regulator_enable(pwgt2); + } + gpio_request(EFIKAMX_POWEROFF, "poweroff"); + pm_power_off = mx51_efikamx_power_off; + + /* enable coincell charger. maybe need a small power driver ? */ + coincell = regulator_get(NULL, "coincell"); + if (!IS_ERR(coincell)) { + regulator_set_voltage(coincell, 3000000, 3000000); + regulator_enable(coincell); + } + + regulator_has_full_constraints(); + } + + return 0; +} +late_initcall(mx51_efikamx_power_init); + +static void __init mx51_efikamx_init(void) { mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads, ARRAY_SIZE(mx51efikamx_pads)); + efika_board_common_init(); + mx51_efikamx_board_id(); - mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config); - mxc_init_imx_uart(); - imx51_add_sdhci_esdhc_imx(0, NULL); /* on < 1.2 boards both SD controllers are used */ if (system_rev < 0x12) { @@ -332,10 +254,6 @@ static void __init mxc_board_init(void) platform_device_register(&mx51_efikamx_leds_device); imx51_add_gpio_keys(&mx51_efikamx_powerkey_data); - spi_register_board_info(mx51_efikamx_spi_board_info, - ARRAY_SIZE(mx51_efikamx_spi_board_info)); - imx51_add_ecspi(0, &mx51_efikamx_spi_pdata); - if (system_rev == 0x11) { gpio_request(EFIKAMX_RESET1_1, "reset"); gpio_direction_output(EFIKAMX_RESET1_1, 1); @@ -343,6 +261,20 @@ static void __init mxc_board_init(void) gpio_request(EFIKAMX_RESET, "reset"); gpio_direction_output(EFIKAMX_RESET, 1); } + + /* + * enable wifi by default only on mx + * sb and mx have same wlan pin but the value to enable it are + * different :/ + */ + gpio_request(EFIKA_WLAN_EN, "wlan_en"); + gpio_direction_output(EFIKA_WLAN_EN, 0); + msleep(10); + + gpio_request(EFIKA_WLAN_RESET, "wlan_rst"); + gpio_direction_output(EFIKA_WLAN_RESET, 0); + msleep(10); + gpio_set_value(EFIKA_WLAN_RESET, 1); } static void __init mx51_efikamx_timer_init(void) @@ -350,15 +282,16 @@ static void __init mx51_efikamx_timer_init(void) mx51_clocks_init(32768, 24000000, 22579200, 24576000); } -static struct sys_timer mxc_timer = { - .init = mx51_efikamx_timer_init, +static struct sys_timer mx51_efikamx_timer = { + .init = mx51_efikamx_timer_init, }; MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop") /* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */ .boot_params = MX51_PHYS_OFFSET + 0x100, .map_io = mx51_map_io, + .init_early = imx51_init_early, .init_irq = mx51_init_irq, - .init_machine = mxc_board_init, - .timer = &mxc_timer, + .timer = &mx51_efikamx_timer, + .init_machine = mx51_efikamx_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c new file mode 100644 index 00000000000..db04ce8462d --- /dev/null +++ b/arch/arm/mach-mx5/board-mx51_efikasb.c @@ -0,0 +1,283 @@ +/* + * Copyright (C) Arnaud Patard <arnaud.patard@rtp-net.org> + * + * based on code from the following + * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved. + * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/input.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/fsl_devices.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/mfd/mc13892.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/consumer.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <mach/ulpi.h> + +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/iomux-mx51.h> +#include <mach/i2c.h> +#include <mach/mxc_ehci.h> + +#include <asm/irq.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include "devices-imx51.h" +#include "devices.h" +#include "efika.h" + +#define EFIKASB_USBH2_STP IMX_GPIO_NR(2, 20) +#define EFIKASB_GREEN_LED IMX_GPIO_NR(1, 3) +#define EFIKASB_WHITE_LED IMX_GPIO_NR(2, 25) +#define EFIKASB_PCBID0 IMX_GPIO_NR(2, 28) +#define EFIKASB_PCBID1 IMX_GPIO_NR(2, 29) +#define EFIKASB_PWRKEY IMX_GPIO_NR(2, 31) +#define EFIKASB_LID IMX_GPIO_NR(3, 14) +#define EFIKASB_POWEROFF IMX_GPIO_NR(4, 13) +#define EFIKASB_RFKILL IMX_GPIO_NR(3, 1) + +#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE) + +static iomux_v3_cfg_t mx51efikasb_pads[] = { + /* USB HOST2 */ + MX51_PAD_EIM_D16__USBH2_DATA0, + MX51_PAD_EIM_D17__USBH2_DATA1, + MX51_PAD_EIM_D18__USBH2_DATA2, + MX51_PAD_EIM_D19__USBH2_DATA3, + MX51_PAD_EIM_D20__USBH2_DATA4, + MX51_PAD_EIM_D21__USBH2_DATA5, + MX51_PAD_EIM_D22__USBH2_DATA6, + MX51_PAD_EIM_D23__USBH2_DATA7, + MX51_PAD_EIM_A24__USBH2_CLK, + MX51_PAD_EIM_A25__USBH2_DIR, + MX51_PAD_EIM_A26__USBH2_STP, + MX51_PAD_EIM_A27__USBH2_NXT, + + /* leds */ + MX51_PAD_EIM_CS0__GPIO2_25, + MX51_PAD_GPIO1_3__GPIO1_3, + + /* pcb id */ + MX51_PAD_EIM_CS3__GPIO2_28, + MX51_PAD_EIM_CS4__GPIO2_29, + + /* lid */ + MX51_PAD_CSI1_VSYNC__GPIO3_14, + + /* power key*/ + MX51_PAD_PWRKEY, + + /* wifi/bt button */ + MX51_PAD_DI1_PIN12__GPIO3_1, + + /* power off */ + MX51_PAD_CSI2_VSYNC__GPIO4_13, + + /* wdog reset */ + MX51_PAD_GPIO1_4__WDOG1_WDOG_B, + + /* BT */ + MX51_PAD_EIM_A17__GPIO2_11, +}; + +static int initialize_usbh2_port(struct platform_device *pdev) +{ + iomux_v3_cfg_t usbh2stp = MX51_PAD_EIM_A26__USBH2_STP; + iomux_v3_cfg_t usbh2gpio = MX51_PAD_EIM_A26__GPIO2_20; + + mxc_iomux_v3_setup_pad(usbh2gpio); + gpio_request(EFIKASB_USBH2_STP, "usbh2_stp"); + gpio_direction_output(EFIKASB_USBH2_STP, 0); + msleep(1); + gpio_set_value(EFIKASB_USBH2_STP, 1); + msleep(1); + + gpio_free(EFIKASB_USBH2_STP); + mxc_iomux_v3_setup_pad(usbh2stp); + + mdelay(10); + + return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD); +} + +static struct mxc_usbh_platform_data usbh2_config = { + .init = initialize_usbh2_port, + .portsc = MXC_EHCI_MODE_ULPI, +}; + +static void __init mx51_efikasb_usb(void) +{ + usbh2_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND); + if (usbh2_config.otg) + mxc_register_device(&mxc_usbh2_device, &usbh2_config); +} + +static struct gpio_led mx51_efikasb_leds[] = { + { + .name = "efikasb:green", + .default_trigger = "default-on", + .gpio = EFIKASB_GREEN_LED, + .active_low = 1, + }, + { + .name = "efikasb:white", + .default_trigger = "caps", + .gpio = EFIKASB_WHITE_LED, + }, +}; + +static struct gpio_led_platform_data mx51_efikasb_leds_data = { + .leds = mx51_efikasb_leds, + .num_leds = ARRAY_SIZE(mx51_efikasb_leds), +}; + +static struct platform_device mx51_efikasb_leds_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &mx51_efikasb_leds_data, + }, +}; + +static struct gpio_keys_button mx51_efikasb_keys[] = { + { + .code = KEY_POWER, + .gpio = EFIKASB_PWRKEY, + .type = EV_PWR, + .desc = "Power Button", + .wakeup = 1, + .debounce_interval = 10, /* ms */ + }, + { + .code = SW_LID, + .gpio = EFIKASB_LID, + .type = EV_SW, + .desc = "Lid Switch", + }, + { + /* SW_RFKILLALL vs KEY_RFKILL ? */ + .code = SW_RFKILL_ALL, + .gpio = EFIKASB_RFKILL, + .type = EV_SW, + .desc = "rfkill", + }, +}; + +static const struct gpio_keys_platform_data mx51_efikasb_keys_data __initconst = { + .buttons = mx51_efikasb_keys, + .nbuttons = ARRAY_SIZE(mx51_efikasb_keys), +}; + +static struct regulator *pwgt1, *pwgt2; + +static void mx51_efikasb_power_off(void) +{ + gpio_set_value(EFIKA_USB_PHY_RESET, 0); + + if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) { + regulator_disable(pwgt2); + regulator_disable(pwgt1); + } + gpio_direction_output(EFIKASB_POWEROFF, 1); +} + +static int __init mx51_efikasb_power_init(void) +{ + if (machine_is_mx51_efikasb()) { + pwgt1 = regulator_get(NULL, "pwgt1"); + pwgt2 = regulator_get(NULL, "pwgt2"); + if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) { + regulator_enable(pwgt1); + regulator_enable(pwgt2); + } + gpio_request(EFIKASB_POWEROFF, "poweroff"); + pm_power_off = mx51_efikasb_power_off; + + regulator_has_full_constraints(); + } + + return 0; +} +late_initcall(mx51_efikasb_power_init); + +/* 01 R1.3 board + 10 R2.0 board */ +static void __init mx51_efikasb_board_id(void) +{ + int id; + + gpio_request(EFIKASB_PCBID0, "pcb id0"); + gpio_direction_input(EFIKASB_PCBID0); + gpio_request(EFIKASB_PCBID1, "pcb id1"); + gpio_direction_input(EFIKASB_PCBID1); + + id = gpio_get_value(EFIKASB_PCBID0); + id |= gpio_get_value(EFIKASB_PCBID1) << 1; + + switch (id) { + default: + break; + case 1: + system_rev = 0x13; + break; + case 2: + system_rev = 0x20; + break; + } +} + +static void __init efikasb_board_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads, + ARRAY_SIZE(mx51efikasb_pads)); + efika_board_common_init(); + + mx51_efikasb_board_id(); + mx51_efikasb_usb(); + imx51_add_sdhci_esdhc_imx(1, NULL); + + platform_device_register(&mx51_efikasb_leds_device); + imx51_add_gpio_keys(&mx51_efikasb_keys_data); + +} + +static void __init mx51_efikasb_timer_init(void) +{ + mx51_clocks_init(32768, 24000000, 22579200, 24576000); +} + +static struct sys_timer mx51_efikasb_timer = { + .init = mx51_efikasb_timer_init, +}; + +MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook") + .boot_params = MX51_PHYS_OFFSET + 0x100, + .map_io = mx51_map_io, + .init_early = imx51_init_early, + .init_irq = mx51_init_irq, + .init_machine = efikasb_board_init, + .timer = &mx51_efikasb_timer, +MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index caee04c0823..7b5735c5ea5 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org> */ @@ -42,28 +42,24 @@ #include "devices-imx53.h" static iomux_v3_cfg_t mx53_evk_pads[] = { - MX53_PAD_CSI0_D10__UART1_TXD, - MX53_PAD_CSI0_D11__UART1_RXD, - MX53_PAD_ATA_DIOW__UART1_TXD, - MX53_PAD_ATA_DMACK__UART1_RXD, + MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, + MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, - MX53_PAD_ATA_BUFFER_EN__UART2_RXD, - MX53_PAD_ATA_DMARQ__UART2_TXD, - MX53_PAD_ATA_DIOR__UART2_RTS, - MX53_PAD_ATA_INTRQ__UART2_CTS, + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX, + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX, + MX53_PAD_PATA_DIOR__UART2_RTS, + MX53_PAD_PATA_INTRQ__UART2_CTS, - MX53_PAD_ATA_CS_0__UART3_TXD, - MX53_PAD_ATA_CS_1__UART3_RXD, - MX53_PAD_ATA_DA_1__UART3_CTS, - MX53_PAD_ATA_DA_2__UART3_RTS, + MX53_PAD_PATA_CS_0__UART3_TXD_MUX, + MX53_PAD_PATA_CS_1__UART3_RXD_MUX, - MX53_PAD_EIM_D16__CSPI1_SCLK, - MX53_PAD_EIM_D17__CSPI1_MISO, - MX53_PAD_EIM_D18__CSPI1_MOSI, + MX53_PAD_EIM_D16__ECSPI1_SCLK, + MX53_PAD_EIM_D17__ECSPI1_MISO, + MX53_PAD_EIM_D18__ECSPI1_MOSI, /* ecspi chip select lines */ - MX53_PAD_EIM_EB2__GPIO_2_30, - MX53_PAD_EIM_D19__GPIO_3_19, + MX53_PAD_EIM_EB2__GPIO2_30, + MX53_PAD_EIM_D19__GPIO3_19, }; static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = { @@ -72,9 +68,9 @@ static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = { static inline void mx53_evk_init_uart(void) { - imx53_add_imx_uart(0, &mx53_evk_uart_pdata); + imx53_add_imx_uart(0, NULL); imx53_add_imx_uart(1, &mx53_evk_uart_pdata); - imx53_add_imx_uart(2, &mx53_evk_uart_pdata); + imx53_add_imx_uart(2, NULL); } static const struct imxi2c_platform_data mx53_evk_i2c_data __initconst = { @@ -139,6 +135,7 @@ static void __init mx53_evk_board_init(void) spi_register_board_info(mx53_evk_spi_board_info, ARRAY_SIZE(mx53_evk_spi_board_info)); imx53_add_ecspi(0, &mx53_evk_spi_data); + imx53_add_imx2_wdt(0, NULL); } static void __init mx53_evk_timer_init(void) @@ -152,7 +149,8 @@ static struct sys_timer mx53_evk_timer = { MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board") .map_io = mx53_map_io, + .init_early = imx53_init_early, .init_irq = mx53_init_irq, - .init_machine = mx53_evk_board_init, .timer = &mx53_evk_timer, + .init_machine = mx53_evk_board_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index d1348e04ace..0a18f8d23eb 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -39,33 +39,147 @@ #define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6) static iomux_v3_cfg_t mx53_loco_pads[] = { - MX53_PAD_CSI0_D10__UART1_TXD, - MX53_PAD_CSI0_D11__UART1_RXD, - MX53_PAD_ATA_DIOW__UART1_TXD, - MX53_PAD_ATA_DMACK__UART1_RXD, - - MX53_PAD_ATA_BUFFER_EN__UART2_RXD, - MX53_PAD_ATA_DMARQ__UART2_TXD, - MX53_PAD_ATA_DIOR__UART2_RTS, - MX53_PAD_ATA_INTRQ__UART2_CTS, - - MX53_PAD_ATA_CS_0__UART3_TXD, - MX53_PAD_ATA_CS_1__UART3_RXD, - MX53_PAD_ATA_DA_1__UART3_CTS, - MX53_PAD_ATA_DA_2__UART3_RTS, + /* FEC */ + MX53_PAD_FEC_MDC__FEC_MDC, + MX53_PAD_FEC_MDIO__FEC_MDIO, + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK, + MX53_PAD_FEC_RX_ER__FEC_RX_ER, + MX53_PAD_FEC_CRS_DV__FEC_RX_DV, + MX53_PAD_FEC_RXD1__FEC_RDATA_1, + MX53_PAD_FEC_RXD0__FEC_RDATA_0, + MX53_PAD_FEC_TX_EN__FEC_TX_EN, + MX53_PAD_FEC_TXD1__FEC_TDATA_1, + MX53_PAD_FEC_TXD0__FEC_TDATA_0, + /* FEC_nRST */ + MX53_PAD_PATA_DA_0__GPIO7_6, + /* FEC_nINT */ + MX53_PAD_PATA_DATA4__GPIO2_4, + /* AUDMUX5 */ + MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC, + MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD, + MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS, + MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD, + /* I2C2 */ + MX53_PAD_KEY_COL3__I2C2_SCL, + MX53_PAD_KEY_ROW3__I2C2_SDA, + /* SD1 */ + MX53_PAD_SD1_CMD__ESDHC1_CMD, + MX53_PAD_SD1_CLK__ESDHC1_CLK, + MX53_PAD_SD1_DATA0__ESDHC1_DAT0, + MX53_PAD_SD1_DATA1__ESDHC1_DAT1, + MX53_PAD_SD1_DATA2__ESDHC1_DAT2, + MX53_PAD_SD1_DATA3__ESDHC1_DAT3, + /* SD3 */ + MX53_PAD_PATA_DATA8__ESDHC3_DAT0, + MX53_PAD_PATA_DATA9__ESDHC3_DAT1, + MX53_PAD_PATA_DATA10__ESDHC3_DAT2, + MX53_PAD_PATA_DATA11__ESDHC3_DAT3, + MX53_PAD_PATA_DATA0__ESDHC3_DAT4, + MX53_PAD_PATA_DATA1__ESDHC3_DAT5, + MX53_PAD_PATA_DATA2__ESDHC3_DAT6, + MX53_PAD_PATA_DATA3__ESDHC3_DAT7, + MX53_PAD_PATA_IORDY__ESDHC3_CLK, + MX53_PAD_PATA_RESET_B__ESDHC3_CMD, + /* SD3_CD */ + MX53_PAD_EIM_DA11__GPIO3_11, + /* SD3_WP */ + MX53_PAD_EIM_DA12__GPIO3_12, + /* VGA */ + MX53_PAD_EIM_OE__IPU_DI1_PIN7, + MX53_PAD_EIM_RW__IPU_DI1_PIN8, + /* DISPLB */ + MX53_PAD_EIM_D20__IPU_SER_DISP0_CS, + MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK, + MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN, + MX53_PAD_EIM_D23__IPU_DI0_D0_CS, + /* DISP0_POWER_EN */ + MX53_PAD_EIM_D24__GPIO3_24, + /* DISP0 DET INT */ + MX53_PAD_EIM_D31__GPIO3_31, + /* LVDS */ + MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3, + MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK, + MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2, + MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1, + MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0, + MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3, + MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2, + MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK, + MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1, + MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0, + /* I2C1 */ + MX53_PAD_CSI0_DAT8__I2C1_SDA, + MX53_PAD_CSI0_DAT9__I2C1_SCL, + /* UART1 */ + MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, + MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, + /* CSI0 */ + MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12, + MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13, + MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14, + MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15, + MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16, + MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17, + MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18, + MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19, + MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC, + MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC, + MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK, + /* DISPLAY */ + MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK, + MX53_PAD_DI0_PIN15__IPU_DI0_PIN15, + MX53_PAD_DI0_PIN2__IPU_DI0_PIN2, + MX53_PAD_DI0_PIN3__IPU_DI0_PIN3, + MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0, + MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1, + MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2, + MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3, + MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4, + MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5, + MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6, + MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7, + MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8, + MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9, + MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10, + MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11, + MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12, + MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13, + MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14, + MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15, + MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16, + MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17, + MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18, + MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19, + MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20, + MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21, + MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22, + MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23, + /* Audio CLK*/ + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK, + /* PWM */ + MX53_PAD_GPIO_1__PWM2_PWMO, + /* SPDIF */ + MX53_PAD_GPIO_7__SPDIF_PLOCK, + MX53_PAD_GPIO_17__SPDIF_OUT1, + /* GPIO */ + MX53_PAD_PATA_DA_1__GPIO7_7, + MX53_PAD_PATA_DA_2__GPIO7_8, + MX53_PAD_PATA_DATA5__GPIO2_5, + MX53_PAD_PATA_DATA6__GPIO2_6, + MX53_PAD_PATA_DATA14__GPIO2_14, + MX53_PAD_PATA_DATA15__GPIO2_15, + MX53_PAD_PATA_INTRQ__GPIO7_2, + MX53_PAD_EIM_WAIT__GPIO5_0, + MX53_PAD_NANDF_WP_B__GPIO6_9, + MX53_PAD_NANDF_RB0__GPIO6_10, + MX53_PAD_NANDF_CS1__GPIO6_14, + MX53_PAD_NANDF_CS2__GPIO6_15, + MX53_PAD_NANDF_CS3__GPIO6_16, + MX53_PAD_GPIO_5__GPIO1_5, + MX53_PAD_GPIO_16__GPIO7_11, + MX53_PAD_GPIO_8__GPIO1_8, }; -static const struct imxuart_platform_data mx53_loco_uart_data __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static inline void mx53_loco_init_uart(void) -{ - imx53_add_imx_uart(0, &mx53_loco_uart_data); - imx53_add_imx_uart(1, &mx53_loco_uart_data); - imx53_add_imx_uart(2, &mx53_loco_uart_data); -} - static inline void mx53_loco_fec_reset(void) { int ret; @@ -85,13 +199,22 @@ static struct fec_platform_data mx53_loco_fec_data = { .phy = PHY_INTERFACE_MODE_RMII, }; +static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = { + .bitrate = 100000, +}; + static void __init mx53_loco_board_init(void) { mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads, ARRAY_SIZE(mx53_loco_pads)); - mx53_loco_init_uart(); + imx53_add_imx_uart(0, NULL); mx53_loco_fec_reset(); imx53_add_fec(&mx53_loco_fec_data); + imx53_add_imx2_wdt(0, NULL); + imx53_add_imx_i2c(0, &mx53_loco_i2c_data); + imx53_add_imx_i2c(1, &mx53_loco_i2c_data); + imx53_add_sdhci_esdhc_imx(0, NULL); + imx53_add_sdhci_esdhc_imx(2, NULL); } static void __init mx53_loco_timer_init(void) @@ -105,7 +228,8 @@ static struct sys_timer mx53_loco_timer = { MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board") .map_io = mx53_map_io, + .init_early = imx53_init_early, .init_irq = mx53_init_irq, - .init_machine = mx53_loco_board_init, .timer = &mx53_loco_timer, + .init_machine = mx53_loco_board_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c index 7970f7a4858..31e173267ed 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-mx5/board-mx53_smd.c @@ -39,20 +39,19 @@ #define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6) static iomux_v3_cfg_t mx53_smd_pads[] = { - MX53_PAD_CSI0_D10__UART1_TXD, - MX53_PAD_CSI0_D11__UART1_RXD, - MX53_PAD_ATA_DIOW__UART1_TXD, - MX53_PAD_ATA_DMACK__UART1_RXD, - - MX53_PAD_ATA_BUFFER_EN__UART2_RXD, - MX53_PAD_ATA_DMARQ__UART2_TXD, - MX53_PAD_ATA_DIOR__UART2_RTS, - MX53_PAD_ATA_INTRQ__UART2_CTS, - - MX53_PAD_ATA_CS_0__UART3_TXD, - MX53_PAD_ATA_CS_1__UART3_RXD, - MX53_PAD_ATA_DA_1__UART3_CTS, - MX53_PAD_ATA_DA_2__UART3_RTS, + MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, + MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, + + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX, + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX, + + MX53_PAD_PATA_CS_0__UART3_TXD_MUX, + MX53_PAD_PATA_CS_1__UART3_RXD_MUX, + MX53_PAD_PATA_DA_1__UART3_CTS, + MX53_PAD_PATA_DA_2__UART3_RTS, + /* I2C1 */ + MX53_PAD_CSI0_DAT8__I2C1_SDA, + MX53_PAD_CSI0_DAT9__I2C1_SCL, }; static const struct imxuart_platform_data mx53_smd_uart_data __initconst = { @@ -61,8 +60,8 @@ static const struct imxuart_platform_data mx53_smd_uart_data __initconst = { static inline void mx53_smd_init_uart(void) { - imx53_add_imx_uart(0, &mx53_smd_uart_data); - imx53_add_imx_uart(1, &mx53_smd_uart_data); + imx53_add_imx_uart(0, NULL); + imx53_add_imx_uart(1, NULL); imx53_add_imx_uart(2, &mx53_smd_uart_data); } @@ -85,6 +84,10 @@ static struct fec_platform_data mx53_smd_fec_data = { .phy = PHY_INTERFACE_MODE_RMII, }; +static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = { + .bitrate = 100000, +}; + static void __init mx53_smd_board_init(void) { mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads, @@ -92,6 +95,8 @@ static void __init mx53_smd_board_init(void) mx53_smd_init_uart(); mx53_smd_fec_reset(); imx53_add_fec(&mx53_smd_fec_data); + imx53_add_imx2_wdt(0, NULL); + imx53_add_imx_i2c(0, &mx53_smd_i2c_data); } static void __init mx53_smd_timer_init(void) @@ -105,7 +110,8 @@ static struct sys_timer mx53_smd_timer = { MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board") .map_io = mx53_map_io, + .init_early = imx53_init_early, .init_irq = mx53_init_irq, - .init_machine = mx53_smd_board_init, .timer = &mx53_smd_timer, + .init_machine = mx53_smd_board_init, MACHINE_END diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index 0a19e7567c0..652ace41382 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -42,6 +42,9 @@ static struct clk usboh3_clk; static struct clk emi_fast_clk; static struct clk ipu_clk; static struct clk mipi_hsc1_clk; +static struct clk esdhc1_clk; +static struct clk esdhc2_clk; +static struct clk esdhc3_mx53_clk; #define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */ @@ -867,10 +870,6 @@ static struct clk gpt_32k_clk = { .parent = &ckil_clk, }; -static struct clk kpp_clk = { - .id = 0, -}; - static struct clk dummy_clk = { .id = 0, }; @@ -1147,10 +1146,80 @@ CLK_GET_RATE(esdhc1, 1, ESDHC1_MSHC1) CLK_SET_PARENT(esdhc1, 1, ESDHC1_MSHC1) CLK_SET_RATE(esdhc1, 1, ESDHC1_MSHC1) +/* mx51 specific */ CLK_GET_RATE(esdhc2, 1, ESDHC2_MSHC2) CLK_SET_PARENT(esdhc2, 1, ESDHC2_MSHC2) CLK_SET_RATE(esdhc2, 1, ESDHC2_MSHC2) +static int clk_esdhc3_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CSCMR1); + if (parent == &esdhc1_clk) + reg &= ~MXC_CCM_CSCMR1_ESDHC3_CLK_SEL; + else if (parent == &esdhc2_clk) + reg |= MXC_CCM_CSCMR1_ESDHC3_CLK_SEL; + else + return -EINVAL; + __raw_writel(reg, MXC_CCM_CSCMR1); + + return 0; +} + +static int clk_esdhc4_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CSCMR1); + if (parent == &esdhc1_clk) + reg &= ~MXC_CCM_CSCMR1_ESDHC4_CLK_SEL; + else if (parent == &esdhc2_clk) + reg |= MXC_CCM_CSCMR1_ESDHC4_CLK_SEL; + else + return -EINVAL; + __raw_writel(reg, MXC_CCM_CSCMR1); + + return 0; +} + +/* mx53 specific */ +static int clk_esdhc2_mx53_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CSCMR1); + if (parent == &esdhc1_clk) + reg &= ~MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL; + else if (parent == &esdhc3_mx53_clk) + reg |= MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL; + else + return -EINVAL; + __raw_writel(reg, MXC_CCM_CSCMR1); + + return 0; +} + +CLK_GET_RATE(esdhc3_mx53, 1, ESDHC3_MX53) +CLK_SET_PARENT(esdhc3_mx53, 1, ESDHC3_MX53) +CLK_SET_RATE(esdhc3_mx53, 1, ESDHC3_MX53) + +static int clk_esdhc4_mx53_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CSCMR1); + if (parent == &esdhc1_clk) + reg &= ~MXC_CCM_CSCMR1_ESDHC4_CLK_SEL; + else if (parent == &esdhc3_mx53_clk) + reg |= MXC_CCM_CSCMR1_ESDHC4_CLK_SEL; + else + return -EINVAL; + __raw_writel(reg, MXC_CCM_CSCMR1); + + return 0; +} + #define DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, e, d, p, s) \ static struct clk name = { \ .id = i, \ @@ -1255,9 +1324,62 @@ DEFINE_CLOCK_MAX(esdhc1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG1_OFFSET, clk_esdhc1, &pll2_sw_clk, &esdhc1_ipg_clk); DEFINE_CLOCK_FULL(esdhc2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG2_OFFSET, NULL, NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL); +DEFINE_CLOCK_FULL(esdhc3_ipg_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG4_OFFSET, + NULL, NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL); +DEFINE_CLOCK_FULL(esdhc4_ipg_clk, 3, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG6_OFFSET, + NULL, NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL); + +/* mx51 specific */ DEFINE_CLOCK_MAX(esdhc2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG3_OFFSET, clk_esdhc2, &pll2_sw_clk, &esdhc2_ipg_clk); +static struct clk esdhc3_clk = { + .id = 2, + .parent = &esdhc1_clk, + .set_parent = clk_esdhc3_set_parent, + .enable_reg = MXC_CCM_CCGR3, + .enable_shift = MXC_CCM_CCGRx_CG5_OFFSET, + .enable = _clk_max_enable, + .disable = _clk_max_disable, + .secondary = &esdhc3_ipg_clk, +}; +static struct clk esdhc4_clk = { + .id = 3, + .parent = &esdhc1_clk, + .set_parent = clk_esdhc4_set_parent, + .enable_reg = MXC_CCM_CCGR3, + .enable_shift = MXC_CCM_CCGRx_CG7_OFFSET, + .enable = _clk_max_enable, + .disable = _clk_max_disable, + .secondary = &esdhc4_ipg_clk, +}; + +/* mx53 specific */ +static struct clk esdhc2_mx53_clk = { + .id = 2, + .parent = &esdhc1_clk, + .set_parent = clk_esdhc2_mx53_set_parent, + .enable_reg = MXC_CCM_CCGR3, + .enable_shift = MXC_CCM_CCGRx_CG3_OFFSET, + .enable = _clk_max_enable, + .disable = _clk_max_disable, + .secondary = &esdhc3_ipg_clk, +}; + +DEFINE_CLOCK_MAX(esdhc3_mx53_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG5_OFFSET, + clk_esdhc3_mx53, &pll2_sw_clk, &esdhc2_ipg_clk); + +static struct clk esdhc4_mx53_clk = { + .id = 3, + .parent = &esdhc1_clk, + .set_parent = clk_esdhc4_mx53_set_parent, + .enable_reg = MXC_CCM_CCGR3, + .enable_shift = MXC_CCM_CCGRx_CG7_OFFSET, + .enable = _clk_max_enable, + .disable = _clk_max_disable, + .secondary = &esdhc4_ipg_clk, +}; + DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk); DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk); DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk); @@ -1302,7 +1424,7 @@ static struct clk_lookup mx51_lookups[] = { _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_ahb_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk) - _REGISTER_CLOCK("imx-keypad", NULL, kpp_clk) + _REGISTER_CLOCK("imx-keypad", NULL, dummy_clk) _REGISTER_CLOCK("mxc_nand", NULL, nfc_clk) _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) @@ -1316,6 +1438,8 @@ static struct clk_lookup mx51_lookups[] = { _REGISTER_CLOCK("imx51-cspi.0", NULL, cspi_clk) _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx.3", NULL, esdhc4_clk) _REGISTER_CLOCK(NULL, "cpu_clk", cpu_clk) _REGISTER_CLOCK(NULL, "iim_clk", iim_clk) _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk) @@ -1336,10 +1460,14 @@ static struct clk_lookup mx53_lookups[] = { _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk) _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_mx53_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_mx53_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx.3", NULL, esdhc4_mx53_clk) _REGISTER_CLOCK("imx53-ecspi.0", NULL, ecspi1_clk) _REGISTER_CLOCK("imx53-ecspi.1", NULL, ecspi2_clk) _REGISTER_CLOCK("imx53-cspi.0", NULL, cspi_clk) + _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk) + _REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk) }; static void clk_tree_init(void) @@ -1427,6 +1555,14 @@ int __init mx53_clocks_init(unsigned long ckil, unsigned long osc, mx53_revision(); clk_disable(&iim_clk); + /* Set SDHC parents to be PLL2 */ + clk_set_parent(&esdhc1_clk, &pll2_sw_clk); + clk_set_parent(&esdhc3_mx53_clk, &pll2_sw_clk); + + /* set SDHC root clock as 200MHZ*/ + clk_set_rate(&esdhc1_clk, 200000000); + clk_set_rate(&esdhc3_mx53_clk, 200000000); + /* System timer */ mxc_timer_init(&gpt_clk, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT); diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c index d40671da437..df46b5e6085 100644 --- a/arch/arm/mach-mx5/cpu.c +++ b/arch/arm/mach-mx5/cpu.c @@ -78,11 +78,16 @@ static int get_mx53_srev(void) void __iomem *iim_base = MX51_IO_ADDRESS(MX53_IIM_BASE_ADDR); u32 rev = readl(iim_base + IIM_SREV) & 0xff; - if (rev == 0x0) + switch (rev) { + case 0x0: return IMX_CHIP_REVISION_1_0; - else if (rev == 0x10) + case 0x2: return IMX_CHIP_REVISION_2_0; - return 0; + case 0x3: + return IMX_CHIP_REVISION_2_1; + default: + return IMX_CHIP_REVISION_UNKNOWN; + } } /* diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-mx5/crm_regs.h index b462c22f53d..87c0c58f27a 100644 --- a/arch/arm/mach-mx5/crm_regs.h +++ b/arch/arm/mach-mx5/crm_regs.h @@ -217,9 +217,12 @@ #define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_OFFSET (20) #define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_MASK (0x3 << 20) #define MXC_CCM_CSCMR1_ESDHC3_CLK_SEL (0x1 << 19) +#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL (0x1 << 19) #define MXC_CCM_CSCMR1_ESDHC4_CLK_SEL (0x1 << 18) #define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_OFFSET (16) #define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_MASK (0x3 << 16) +#define MXC_CCM_CSCMR1_ESDHC3_MX53_CLK_SEL_OFFSET (16) +#define MXC_CCM_CSCMR1_ESDHC3_MX53_CLK_SEL_MASK (0x3 << 16) #define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET (14) #define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK (0x3 << 14) #define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET (12) @@ -271,6 +274,10 @@ #define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK (0x7 << 22) #define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET (19) #define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK (0x7 << 19) +#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PRED_OFFSET (22) +#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PRED_MASK (0x7 << 22) +#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PODF_OFFSET (19) +#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PODF_MASK (0x7 << 19) #define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET (16) #define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK (0x7 << 16) #define MXC_CCM_CSCDR1_PGC_CLK_PODF_OFFSET (14) diff --git a/arch/arm/mach-mx5/devices-mx50.h b/arch/arm/mach-mx5/devices-imx50.h index 98ab07468a0..c9e42823c7e 100644 --- a/arch/arm/mach-mx5/devices-mx50.h +++ b/arch/arm/mach-mx5/devices-imx50.h @@ -24,3 +24,11 @@ extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[] __initconst; #define imx50_add_imx_uart(id, pdata) \ imx_add_imx_uart_1irq(&imx50_imx_uart_data[id], pdata) + +extern const struct imx_fec_data imx50_fec_data __initconst; +#define imx50_add_fec(pdata) \ + imx_add_fec(&imx50_fec_data, pdata) + +extern const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst; +#define imx50_add_imx_i2c(id, pdata) \ + imx_add_imx_i2c(&imx50_imx_i2c_data[id], pdata) diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h index 8639735a117..9251008dad1 100644 --- a/arch/arm/mach-mx5/devices-imx53.h +++ b/arch/arm/mach-mx5/devices-imx53.h @@ -29,3 +29,7 @@ imx53_sdhci_esdhc_imx_data[] __initconst; extern const struct imx_spi_imx_data imx53_ecspi_data[] __initconst; #define imx53_add_ecspi(id, pdata) \ imx_add_spi_imx(&imx53_ecspi_data[id], pdata) + +extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[] __initconst; +#define imx53_add_imx2_wdt(id, pdata) \ + imx_add_imx2_wdt(&imx53_imx2_wdt_data[id]) diff --git a/arch/arm/mach-mx5/efika.h b/arch/arm/mach-mx5/efika.h new file mode 100644 index 00000000000..014aa985faa --- /dev/null +++ b/arch/arm/mach-mx5/efika.h @@ -0,0 +1,10 @@ +#ifndef _EFIKA_H +#define _EFIKA_H + +#define EFIKA_WLAN_EN IMX_GPIO_NR(2, 16) +#define EFIKA_WLAN_RESET IMX_GPIO_NR(2, 10) +#define EFIKA_USB_PHY_RESET IMX_GPIO_NR(2, 9) + +void __init efika_board_common_init(void); + +#endif diff --git a/arch/arm/mach-mx5/ehci.c b/arch/arm/mach-mx5/ehci.c new file mode 100644 index 00000000000..7ce12c804a3 --- /dev/null +++ b/arch/arm/mach-mx5/ehci.c @@ -0,0 +1,156 @@ +/* + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/mxc_ehci.h> + +#define MXC_OTG_OFFSET 0 +#define MXC_H1_OFFSET 0x200 +#define MXC_H2_OFFSET 0x400 + +/* USB_CTRL */ +#define MXC_OTG_UCTRL_OWIE_BIT (1 << 27) /* OTG wakeup intr enable */ +#define MXC_OTG_UCTRL_OPM_BIT (1 << 24) /* OTG power mask */ +#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) /* Host1 ULPI interrupt enable */ +#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) /* HOST1 wakeup intr enable */ +#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */ + +/* USB_PHY_CTRL_FUNC */ +#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */ +#define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */ + +/* USBH2CTRL */ +#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8) +#define MXC_H2_UCTRL_H2WIE_BIT (1 << 7) +#define MXC_H2_UCTRL_H2PM_BIT (1 << 4) + +#define MXC_USBCMD_OFFSET 0x140 + +/* USBCMD */ +#define MXC_UCMD_ITC_NO_THRESHOLD_MASK (~(0xff << 16)) /* Interrupt Threshold Control */ + +int mx51_initialize_usb_hw(int port, unsigned int flags) +{ + unsigned int v; + void __iomem *usb_base; + void __iomem *usbotg_base; + void __iomem *usbother_base; + int ret = 0; + + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + if (!usb_base) { + printk(KERN_ERR "%s(): ioremap failed\n", __func__); + return -ENOMEM; + } + + switch (port) { + case 0: /* OTG port */ + usbotg_base = usb_base + MXC_OTG_OFFSET; + break; + case 1: /* Host 1 port */ + usbotg_base = usb_base + MXC_H1_OFFSET; + break; + case 2: /* Host 2 port */ + usbotg_base = usb_base + MXC_H2_OFFSET; + break; + default: + printk(KERN_ERR"%s no such port %d\n", __func__, port); + ret = -ENOENT; + goto error; + } + usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; + + switch (port) { + case 0: /*OTG port */ + if (flags & MXC_EHCI_INTERNAL_PHY) { + v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + + if (flags & MXC_EHCI_POWER_PINS_ENABLED) { + /* OC/USBPWR is not used */ + v |= MXC_OTG_PHYCTRL_OC_DIS_BIT; + } else { + /* OC/USBPWR is used */ + v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT; + } + __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + + v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); + if (flags & MXC_EHCI_WAKEUP_ENABLED) + v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */ + else + v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */ + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v |= MXC_OTG_UCTRL_OPM_BIT; + else + v &= ~MXC_OTG_UCTRL_OPM_BIT; + __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); + } + break; + case 1: /* Host 1 */ + /*Host ULPI */ + v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); + if (flags & MXC_EHCI_WAKEUP_ENABLED) { + /* HOST1 wakeup/ULPI intr enable */ + v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT); + } else { + /* HOST1 wakeup/ULPI intr disable */ + v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT); + } + + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/ + else + v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/ + __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); + + v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */ + else + v |= MXC_H1_OC_DIS_BIT; /* OC is not used */ + __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + + v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET); + if (flags & MXC_EHCI_ITC_NO_THRESHOLD) + /* Interrupt Threshold Control:Immediate (no threshold) */ + v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK; + __raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET); + break; + case 2: /* Host 2 ULPI */ + v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET); + if (flags & MXC_EHCI_WAKEUP_ENABLED) { + /* HOST1 wakeup/ULPI intr enable */ + v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT); + } else { + /* HOST1 wakeup/ULPI intr disable */ + v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT); + } + + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/ + else + v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/ + __raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET); + break; + } + +error: + iounmap(usb_base); + return ret; +} + diff --git a/arch/arm/mach-mx5/mm-mx50.c b/arch/arm/mach-mx5/mm-mx50.c index 8c6540e5839..b9c363b514a 100644 --- a/arch/arm/mach-mx5/mm-mx50.c +++ b/arch/arm/mach-mx5/mm-mx50.c @@ -26,6 +26,8 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-v3.h> +#include <mach/gpio.h> +#include <mach/irqs.h> /* * Define the MX50 memory map. @@ -44,16 +46,27 @@ static struct map_desc mx50_io_desc[] __initdata = { */ void __init mx50_map_io(void) { + iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc)); +} + +void __init imx50_init_early(void) +{ mxc_set_cpu_type(MXC_CPU_MX50); mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR)); - iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc)); } -int imx50_register_gpios(void); +static struct mxc_gpio_port imx50_gpio_ports[] = { + DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 0, 1, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH), + DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 1, 2, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH), + DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 2, 3, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), + DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 3, 4, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), + DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 4, 5, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), + DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 5, 6, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), +}; void __init mx50_init_irq(void) { tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR)); - imx50_register_gpios(); + mxc_gpio_init(imx50_gpio_ports, ARRAY_SIZE(imx50_gpio_ports)); } diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index 457f9f95204..ff557301b42 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -47,18 +47,26 @@ static struct map_desc mx53_io_desc[] __initdata = { */ void __init mx51_map_io(void) { + iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc)); +} + +void __init imx51_init_early(void) +{ mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); - iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc)); } void __init mx53_map_io(void) { + iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc)); +} + +void __init imx53_init_early(void) +{ mxc_set_cpu_type(MXC_CPU_MX53); mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR)); - mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG_BASE_ADDR)); - iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc)); + mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR)); } int imx51_register_gpios(void); diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c new file mode 100644 index 00000000000..51a67fc7f0e --- /dev/null +++ b/arch/arm/mach-mx5/mx51_efika.c @@ -0,0 +1,636 @@ +/* + * based on code from the following + * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved. + * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/input.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/fsl_devices.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/mfd/mc13892.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/consumer.h> + +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/iomux-mx51.h> +#include <mach/i2c.h> +#include <mach/mxc_ehci.h> + +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <mach/ulpi.h> + +#include <asm/irq.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach-types.h> + +#include "devices-imx51.h" +#include "devices.h" +#include "efika.h" +#include "cpu_op-mx51.h" + +#define MX51_USB_CTRL_1_OFFSET 0x10 +#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) +#define MX51_USB_PLL_DIV_19_2_MHZ 0x01 + +#define EFIKAMX_USB_HUB_RESET IMX_GPIO_NR(1, 5) +#define EFIKAMX_USBH1_STP IMX_GPIO_NR(1, 27) + +#define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24) +#define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25) + +#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6) + +static iomux_v3_cfg_t mx51efika_pads[] = { + /* UART1 */ + MX51_PAD_UART1_RXD__UART1_RXD, + MX51_PAD_UART1_TXD__UART1_TXD, + MX51_PAD_UART1_RTS__UART1_RTS, + MX51_PAD_UART1_CTS__UART1_CTS, + + /* SD 1 */ + MX51_PAD_SD1_CMD__SD1_CMD, + MX51_PAD_SD1_CLK__SD1_CLK, + MX51_PAD_SD1_DATA0__SD1_DATA0, + MX51_PAD_SD1_DATA1__SD1_DATA1, + MX51_PAD_SD1_DATA2__SD1_DATA2, + MX51_PAD_SD1_DATA3__SD1_DATA3, + + /* SD 2 */ + MX51_PAD_SD2_CMD__SD2_CMD, + MX51_PAD_SD2_CLK__SD2_CLK, + MX51_PAD_SD2_DATA0__SD2_DATA0, + MX51_PAD_SD2_DATA1__SD2_DATA1, + MX51_PAD_SD2_DATA2__SD2_DATA2, + MX51_PAD_SD2_DATA3__SD2_DATA3, + + /* SD/MMC WP/CD */ + MX51_PAD_GPIO1_0__SD1_CD, + MX51_PAD_GPIO1_1__SD1_WP, + MX51_PAD_GPIO1_7__SD2_WP, + MX51_PAD_GPIO1_8__SD2_CD, + + /* spi */ + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, + MX51_PAD_CSPI1_MISO__ECSPI1_MISO, + MX51_PAD_CSPI1_SS0__GPIO4_24, + MX51_PAD_CSPI1_SS1__GPIO4_25, + MX51_PAD_CSPI1_RDY__ECSPI1_RDY, + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, + MX51_PAD_GPIO1_6__GPIO1_6, + + /* USB HOST1 */ + MX51_PAD_USBH1_CLK__USBH1_CLK, + MX51_PAD_USBH1_DIR__USBH1_DIR, + MX51_PAD_USBH1_NXT__USBH1_NXT, + MX51_PAD_USBH1_DATA0__USBH1_DATA0, + MX51_PAD_USBH1_DATA1__USBH1_DATA1, + MX51_PAD_USBH1_DATA2__USBH1_DATA2, + MX51_PAD_USBH1_DATA3__USBH1_DATA3, + MX51_PAD_USBH1_DATA4__USBH1_DATA4, + MX51_PAD_USBH1_DATA5__USBH1_DATA5, + MX51_PAD_USBH1_DATA6__USBH1_DATA6, + MX51_PAD_USBH1_DATA7__USBH1_DATA7, + + /* USB HUB RESET */ + MX51_PAD_GPIO1_5__GPIO1_5, + + /* WLAN */ + MX51_PAD_EIM_A22__GPIO2_16, + MX51_PAD_EIM_A16__GPIO2_10, + + /* USB PHY RESET */ + MX51_PAD_EIM_D27__GPIO2_9, +}; + +/* Serial ports */ +static const struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +/* This function is board specific as the bit mask for the plldiv will also + * be different for other Freescale SoCs, thus a common bitmask is not + * possible and cannot get place in /plat-mxc/ehci.c. + */ +static int initialize_otg_port(struct platform_device *pdev) +{ + u32 v; + void __iomem *usb_base; + void __iomem *usbother_base; + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + if (!usb_base) + return -ENOMEM; + usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET); + + /* Set the PHY clock to 19.2MHz */ + v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); + v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; + v |= MX51_USB_PLL_DIV_19_2_MHZ; + __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); + iounmap(usb_base); + + mdelay(10); + + return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY); +} + +static struct mxc_usbh_platform_data dr_utmi_config = { + .init = initialize_otg_port, + .portsc = MXC_EHCI_UTMI_16BIT, +}; + +static int initialize_usbh1_port(struct platform_device *pdev) +{ + iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; + iomux_v3_cfg_t usbh1gpio = MX51_PAD_USBH1_STP__GPIO1_27; + u32 v; + void __iomem *usb_base; + void __iomem *socregs_base; + + mxc_iomux_v3_setup_pad(usbh1gpio); + gpio_request(EFIKAMX_USBH1_STP, "usbh1_stp"); + gpio_direction_output(EFIKAMX_USBH1_STP, 0); + msleep(1); + gpio_set_value(EFIKAMX_USBH1_STP, 1); + msleep(1); + + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET); + + /* The clock for the USBH1 ULPI port will come externally */ + /* from the PHY. */ + v = __raw_readl(socregs_base + MX51_USB_CTRL_1_OFFSET); + __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, + socregs_base + MX51_USB_CTRL_1_OFFSET); + + iounmap(usb_base); + + gpio_free(EFIKAMX_USBH1_STP); + mxc_iomux_v3_setup_pad(usbh1stp); + + mdelay(10); + + return mx51_initialize_usb_hw(0, MXC_EHCI_ITC_NO_THRESHOLD); +} + +static struct mxc_usbh_platform_data usbh1_config = { + .init = initialize_usbh1_port, + .portsc = MXC_EHCI_MODE_ULPI, +}; + +static void mx51_efika_hubreset(void) +{ + gpio_request(EFIKAMX_USB_HUB_RESET, "usb_hub_rst"); + gpio_direction_output(EFIKAMX_USB_HUB_RESET, 1); + msleep(1); + gpio_set_value(EFIKAMX_USB_HUB_RESET, 0); + msleep(1); + gpio_set_value(EFIKAMX_USB_HUB_RESET, 1); +} + +static void __init mx51_efika_usb(void) +{ + mx51_efika_hubreset(); + + /* pulling it low, means no USB at all... */ + gpio_request(EFIKA_USB_PHY_RESET, "usb_phy_reset"); + gpio_direction_output(EFIKA_USB_PHY_RESET, 0); + msleep(1); + gpio_set_value(EFIKA_USB_PHY_RESET, 1); + + usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND); + + mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config); + if (usbh1_config.otg) + mxc_register_device(&mxc_usbh1_device, &usbh1_config); +} + +static struct mtd_partition mx51_efika_spi_nor_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_256K, + }, + { + .name = "config", + .offset = MTDPART_OFS_APPEND, + .size = SZ_64K, + }, +}; + +static struct flash_platform_data mx51_efika_spi_flash_data = { + .name = "spi_flash", + .parts = mx51_efika_spi_nor_partitions, + .nr_parts = ARRAY_SIZE(mx51_efika_spi_nor_partitions), + .type = "sst25vf032b", +}; + +static struct regulator_consumer_supply sw1_consumers[] = { + { + .supply = "cpu_vcc", + } +}; + +static struct regulator_consumer_supply vdig_consumers[] = { + /* sgtl5000 */ + REGULATOR_SUPPLY("VDDA", "1-000a"), + REGULATOR_SUPPLY("VDDD", "1-000a"), +}; + +static struct regulator_consumer_supply vvideo_consumers[] = { + /* sgtl5000 */ + REGULATOR_SUPPLY("VDDIO", "1-000a"), +}; + +static struct regulator_consumer_supply vsd_consumers[] = { + REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx.0"), + REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx.1"), +}; + +static struct regulator_consumer_supply pwgt1_consumer[] = { + { + .supply = "pwgt1", + } +}; + +static struct regulator_consumer_supply pwgt2_consumer[] = { + { + .supply = "pwgt2", + } +}; + +static struct regulator_consumer_supply coincell_consumer[] = { + { + .supply = "coincell", + } +}; + +static struct regulator_init_data sw1_init = { + .constraints = { + .name = "SW1", + .min_uV = 600000, + .max_uV = 1375000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .valid_modes_mask = 0, + .always_on = 1, + .boot_on = 1, + .state_mem = { + .uV = 850000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(sw1_consumers), + .consumer_supplies = sw1_consumers, +}; + +static struct regulator_init_data sw2_init = { + .constraints = { + .name = "SW2", + .min_uV = 900000, + .max_uV = 1850000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + .state_mem = { + .uV = 950000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + } +}; + +static struct regulator_init_data sw3_init = { + .constraints = { + .name = "SW3", + .min_uV = 1100000, + .max_uV = 1850000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + } +}; + +static struct regulator_init_data sw4_init = { + .constraints = { + .name = "SW4", + .min_uV = 1100000, + .max_uV = 1850000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + } +}; + +static struct regulator_init_data viohi_init = { + .constraints = { + .name = "VIOHI", + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vusb_init = { + .constraints = { + .name = "VUSB", + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data swbst_init = { + .constraints = { + .name = "SWBST", + } +}; + +static struct regulator_init_data vdig_init = { + .constraints = { + .name = "VDIG", + .min_uV = 1050000, + .max_uV = 1800000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(vdig_consumers), + .consumer_supplies = vdig_consumers, +}; + +static struct regulator_init_data vpll_init = { + .constraints = { + .name = "VPLL", + .min_uV = 1050000, + .max_uV = 1800000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vusb2_init = { + .constraints = { + .name = "VUSB2", + .min_uV = 2400000, + .max_uV = 2775000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vvideo_init = { + .constraints = { + .name = "VVIDEO", + .min_uV = 2775000, + .max_uV = 2775000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .apply_uV = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(vvideo_consumers), + .consumer_supplies = vvideo_consumers, +}; + +static struct regulator_init_data vaudio_init = { + .constraints = { + .name = "VAUDIO", + .min_uV = 2300000, + .max_uV = 3000000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + } +}; + +static struct regulator_init_data vsd_init = { + .constraints = { + .name = "VSD", + .min_uV = 1800000, + .max_uV = 3150000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(vsd_consumers), + .consumer_supplies = vsd_consumers, +}; + +static struct regulator_init_data vcam_init = { + .constraints = { + .name = "VCAM", + .min_uV = 2500000, + .max_uV = 3000000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, + .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL, + .boot_on = 1, + } +}; + +static struct regulator_init_data vgen1_init = { + .constraints = { + .name = "VGEN1", + .min_uV = 1200000, + .max_uV = 3150000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vgen2_init = { + .constraints = { + .name = "VGEN2", + .min_uV = 1200000, + .max_uV = 3150000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vgen3_init = { + .constraints = { + .name = "VGEN3", + .min_uV = 1800000, + .max_uV = 2900000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data gpo1_init = { + .constraints = { + .name = "GPO1", + } +}; + +static struct regulator_init_data gpo2_init = { + .constraints = { + .name = "GPO2", + } +}; + +static struct regulator_init_data gpo3_init = { + .constraints = { + .name = "GPO3", + } +}; + +static struct regulator_init_data gpo4_init = { + .constraints = { + .name = "GPO4", + } +}; + +static struct regulator_init_data pwgt1_init = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(pwgt1_consumer), + .consumer_supplies = pwgt1_consumer, +}; + +static struct regulator_init_data pwgt2_init = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(pwgt2_consumer), + .consumer_supplies = pwgt2_consumer, +}; + +static struct regulator_init_data vcoincell_init = { + .constraints = { + .name = "COINCELL", + .min_uV = 3000000, + .max_uV = 3000000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(coincell_consumer), + .consumer_supplies = coincell_consumer, +}; + +static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = { + { .id = MC13892_SW1, .init_data = &sw1_init }, + { .id = MC13892_SW2, .init_data = &sw2_init }, + { .id = MC13892_SW3, .init_data = &sw3_init }, + { .id = MC13892_SW4, .init_data = &sw4_init }, + { .id = MC13892_SWBST, .init_data = &swbst_init }, + { .id = MC13892_VIOHI, .init_data = &viohi_init }, + { .id = MC13892_VPLL, .init_data = &vpll_init }, + { .id = MC13892_VDIG, .init_data = &vdig_init }, + { .id = MC13892_VSD, .init_data = &vsd_init }, + { .id = MC13892_VUSB2, .init_data = &vusb2_init }, + { .id = MC13892_VVIDEO, .init_data = &vvideo_init }, + { .id = MC13892_VAUDIO, .init_data = &vaudio_init }, + { .id = MC13892_VCAM, .init_data = &vcam_init }, + { .id = MC13892_VGEN1, .init_data = &vgen1_init }, + { .id = MC13892_VGEN2, .init_data = &vgen2_init }, + { .id = MC13892_VGEN3, .init_data = &vgen3_init }, + { .id = MC13892_VUSB, .init_data = &vusb_init }, + { .id = MC13892_GPO1, .init_data = &gpo1_init }, + { .id = MC13892_GPO2, .init_data = &gpo2_init }, + { .id = MC13892_GPO3, .init_data = &gpo3_init }, + { .id = MC13892_GPO4, .init_data = &gpo4_init }, + { .id = MC13892_PWGT1SPI, .init_data = &pwgt1_init }, + { .id = MC13892_PWGT2SPI, .init_data = &pwgt2_init }, + { .id = MC13892_VCOINCELL, .init_data = &vcoincell_init }, +}; + +static struct mc13xxx_platform_data mx51_efika_mc13892_data = { + .flags = MC13XXX_USE_RTC | MC13XXX_USE_REGULATOR, + .num_regulators = ARRAY_SIZE(mx51_efika_regulators), + .regulators = mx51_efika_regulators, +}; + +static struct spi_board_info mx51_efika_spi_board_info[] __initdata = { + { + .modalias = "m25p80", + .max_speed_hz = 25000000, + .bus_num = 0, + .chip_select = 1, + .platform_data = &mx51_efika_spi_flash_data, + .irq = -1, + }, + { + .modalias = "mc13892", + .max_speed_hz = 1000000, + .bus_num = 0, + .chip_select = 0, + .platform_data = &mx51_efika_mc13892_data, + .irq = gpio_to_irq(EFIKAMX_PMIC), + }, +}; + +static int mx51_efika_spi_cs[] = { + EFIKAMX_SPI_CS0, + EFIKAMX_SPI_CS1, +}; + +static const struct spi_imx_master mx51_efika_spi_pdata __initconst = { + .chipselect = mx51_efika_spi_cs, + .num_chipselect = ARRAY_SIZE(mx51_efika_spi_cs), +}; + +void __init efika_board_common_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx51efika_pads, + ARRAY_SIZE(mx51efika_pads)); + imx51_add_imx_uart(0, &uart_pdata); + mx51_efika_usb(); + imx51_add_sdhci_esdhc_imx(0, NULL); + + /* FIXME: comes from original code. check this. */ + if (mx51_revision() < IMX_CHIP_REVISION_2_0) + sw2_init.constraints.state_mem.uV = 1100000; + else if (mx51_revision() == IMX_CHIP_REVISION_2_0) { + sw2_init.constraints.state_mem.uV = 1250000; + sw1_init.constraints.state_mem.uV = 1000000; + } + if (machine_is_mx51_efikasb()) + vgen1_init.constraints.max_uV = 1200000; + + gpio_request(EFIKAMX_PMIC, "pmic irq"); + gpio_direction_input(EFIKAMX_PMIC); + spi_register_board_info(mx51_efika_spi_board_info, + ARRAY_SIZE(mx51_efika_spi_board_info)); + imx51_add_ecspi(0, &mx51_efika_spi_pdata); + +#if defined(CONFIG_CPU_FREQ_IMX) + get_cpu_op = mx51_get_cpu_op; +#endif +} + diff --git a/arch/arm/mach-mxc91231/iomux.c b/arch/arm/mach-mxc91231/iomux.c index 405d9b19d89..66fc41cbf2c 100644 --- a/arch/arm/mach-mxc91231/iomux.c +++ b/arch/arm/mach-mxc91231/iomux.c @@ -50,7 +50,7 @@ unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG]; /* * set the mode for a IOMUX pin. */ -int mxc_iomux_mode(const unsigned int pin_mode) +int mxc_iomux_mode(unsigned int pin_mode) { u32 side, field, l, mode, ret = 0; void __iomem *reg; @@ -114,7 +114,7 @@ EXPORT_SYMBOL(mxc_iomux_set_pad); * - reserves the pin so that it is not claimed by another driver * - setups the iomux according to the configuration */ -int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label) +int mxc_iomux_alloc_pin(unsigned int pin_mode, const char *label) { unsigned pad = PIN_GLOBAL_NUM(pin_mode); if (pad >= (PIN_MAX + 1)) { @@ -134,10 +134,10 @@ int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label) } EXPORT_SYMBOL(mxc_iomux_alloc_pin); -int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count, +int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count, const char *label) { - unsigned int *p = pin_list; + const unsigned int *p = pin_list; int i; int ret = -EINVAL; @@ -155,7 +155,7 @@ setup_error: } EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins); -void mxc_iomux_release_pin(const unsigned int pin_mode) +void mxc_iomux_release_pin(unsigned int pin_mode) { unsigned pad = PIN_GLOBAL_NUM(pin_mode); @@ -164,9 +164,9 @@ void mxc_iomux_release_pin(const unsigned int pin_mode) } EXPORT_SYMBOL(mxc_iomux_release_pin); -void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count) +void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count) { - unsigned int *p = pin_list; + const unsigned int *p = pin_list; int i; for (i = 0; i < count; i++) { diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c index 395d83be8c9..f31a45e5a0b 100644 --- a/arch/arm/mach-mxc91231/magx-zn5.c +++ b/arch/arm/mach-mxc91231/magx-zn5.c @@ -53,9 +53,10 @@ struct sys_timer zn5_timer = { }; MACHINE_START(MAGX_ZN5, "Motorola Zn5") - .boot_params = MXC91231_PHYS_OFFSET + 0x100, - .map_io = mxc91231_map_io, - .init_irq = mxc91231_init_irq, - .timer = &zn5_timer, - .init_machine = zn5_init, + .boot_params = MXC91231_PHYS_OFFSET + 0x100, + .map_io = mxc91231_map_io, + .init_early = mxc91231_init_early, + .init_irq = mxc91231_init_irq, + .timer = &zn5_timer, + .init_machine = zn5_init, MACHINE_END diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c index 7652c301da8..a77f6daf6a2 100644 --- a/arch/arm/mach-mxc91231/mm.c +++ b/arch/arm/mach-mxc91231/mm.c @@ -45,11 +45,14 @@ static struct map_desc mxc91231_io_desc[] __initdata = { */ void __init mxc91231_map_io(void) { - mxc_set_cpu_type(MXC_CPU_MXC91231); - iotable_init(mxc91231_io_desc, ARRAY_SIZE(mxc91231_io_desc)); } +void __init mxc91231_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MXC91231); +} + int mxc91231_register_gpios(void); void __init mxc91231_init_irq(void) diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 8bfc8df5461..4f6f174af6c 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -2,13 +2,18 @@ if ARCH_MXS source "arch/arm/mach-mxs/devices/Kconfig" +config MXS_OCOTP + bool + config SOC_IMX23 bool select CPU_ARM926T + select HAVE_PWM config SOC_IMX28 bool select CPU_ARM926T + select HAVE_PWM comment "MXS platforms:" @@ -16,6 +21,8 @@ config MACH_MX23EVK bool "Support MX23EVK Platform" select SOC_IMX23 select MXS_HAVE_AMBA_DUART + select MXS_HAVE_PLATFORM_AUART + select MXS_HAVE_PLATFORM_MXSFB default y help Include support for MX23EVK platform. This includes specific @@ -25,10 +32,27 @@ config MACH_MX28EVK bool "Support MX28EVK Platform" select SOC_IMX28 select MXS_HAVE_AMBA_DUART + select MXS_HAVE_PLATFORM_AUART select MXS_HAVE_PLATFORM_FEC + select MXS_HAVE_PLATFORM_FLEXCAN + select MXS_HAVE_PLATFORM_MXSFB + select MXS_OCOTP default y help Include support for MX28EVK platform. This includes specific configurations for the board and its peripherals. +config MODULE_TX28 + bool + select SOC_IMX28 + select MXS_HAVE_AMBA_DUART + select MXS_HAVE_PLATFORM_AUART + select MXS_HAVE_PLATFORM_FEC + select MXS_HAVE_PLATFORM_MXS_I2C + select MXS_HAVE_PLATFORM_MXS_PWM + +config MACH_TX28 + bool "Ka-Ro TX28 module" + select MODULE_TX28 + endif diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 39d3f9c2a84..2f1f6141ca7 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,10 +1,15 @@ # Common support obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o +obj-$(CONFIG_MXS_OCOTP) += ocotp.o +obj-$(CONFIG_PM) += pm.o + obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o +obj-$(CONFIG_MODULE_TX28) += module-tx28.o +obj-$(CONFIG_MACH_TX28) += mach-tx28.o obj-y += devices/ diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index ca72a05ed9c..d133c7f3094 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -442,11 +442,18 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("duart", "apb_pclk", xbus_clk) /* for amba-pl011 driver */ _REGISTER_CLOCK("duart", NULL, uart_clk) + _REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk) _REGISTER_CLOCK("rtc", NULL, rtc_clk) - _REGISTER_CLOCK(NULL, "hclk", hbus_clk) + _REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk) + _REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk) _REGISTER_CLOCK(NULL, "usb", usb_clk) _REGISTER_CLOCK(NULL, "audio", audio_clk) - _REGISTER_CLOCK(NULL, "pwm", pwm_clk) + _REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.1", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.2", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk) + _REGISTER_CLOCK("imx23-fb", NULL, lcdif_clk) }; static int clk_misc_init(void) diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index fd1c4c54b8e..5e489a2b202 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -609,17 +609,30 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("duart", NULL, uart_clk) _REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk) _REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk) + _REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk) + _REGISTER_CLOCK("mxs-auart.1", NULL, uart_clk) + _REGISTER_CLOCK("mxs-auart.2", NULL, uart_clk) + _REGISTER_CLOCK("mxs-auart.3", NULL, uart_clk) + _REGISTER_CLOCK("mxs-auart.4", NULL, uart_clk) _REGISTER_CLOCK("rtc", NULL, rtc_clk) _REGISTER_CLOCK("pll2", NULL, pll2_clk) - _REGISTER_CLOCK(NULL, "hclk", hbus_clk) - _REGISTER_CLOCK(NULL, "xclk", xbus_clk) - _REGISTER_CLOCK(NULL, "can0", can0_clk) - _REGISTER_CLOCK(NULL, "can1", can1_clk) + _REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk) + _REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk) + _REGISTER_CLOCK("flexcan.0", NULL, can0_clk) + _REGISTER_CLOCK("flexcan.1", NULL, can1_clk) _REGISTER_CLOCK(NULL, "usb0", usb0_clk) _REGISTER_CLOCK(NULL, "usb1", usb1_clk) - _REGISTER_CLOCK(NULL, "pwm", pwm_clk) + _REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.1", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.2", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.5", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.6", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.7", NULL, pwm_clk) _REGISTER_CLOCK(NULL, "lradc", lradc_clk) _REGISTER_CLOCK(NULL, "spdif", spdif_clk) + _REGISTER_CLOCK("imx28-fb", NULL, lcdif_clk) }; static int clk_misc_init(void) @@ -737,6 +750,8 @@ int __init mx28_clocks_init(void) clk_enable(&emi_clk); clk_enable(&uart_clk); + clk_set_parent(&lcdif_clk, &ref_pix_clk); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); mxs_timer_init(&clk32k_clk, MX28_INT_TIMER0); diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h index 1256788561d..c7e14f4e366 100644 --- a/arch/arm/mach-mxs/devices-mx23.h +++ b/arch/arm/mach-mxs/devices-mx23.h @@ -10,7 +10,18 @@ */ #include <mach/mx23.h> #include <mach/devices-common.h> +#include <mach/mxsfb.h> extern const struct amba_device mx23_duart_device __initconst; #define mx23_add_duart() \ mxs_add_duart(&mx23_duart_device) + +extern const struct mxs_auart_data mx23_auart_data[] __initconst; +#define mx23_add_auart(id) mxs_add_auart(&mx23_auart_data[id]) +#define mx23_add_auart0() mx23_add_auart(0) +#define mx23_add_auart1() mx23_add_auart(1) + +#define mx23_add_mxs_pwm(id) mxs_add_mxs_pwm(MX23_PWM_BASE_ADDR, id) + +struct platform_device *__init mx23_add_mxsfb( + const struct mxsfb_platform_data *pdata); diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h index 33773a6333a..9d08555c4cf 100644 --- a/arch/arm/mach-mxs/devices-mx28.h +++ b/arch/arm/mach-mxs/devices-mx28.h @@ -10,11 +10,34 @@ */ #include <mach/mx28.h> #include <mach/devices-common.h> +#include <mach/mxsfb.h> extern const struct amba_device mx28_duart_device __initconst; #define mx28_add_duart() \ mxs_add_duart(&mx28_duart_device) +extern const struct mxs_auart_data mx28_auart_data[] __initconst; +#define mx28_add_auart(id) mxs_add_auart(&mx28_auart_data[id]) +#define mx28_add_auart0() mx28_add_auart(0) +#define mx28_add_auart1() mx28_add_auart(1) +#define mx28_add_auart2() mx28_add_auart(2) +#define mx28_add_auart3() mx28_add_auart(3) +#define mx28_add_auart4() mx28_add_auart(4) + extern const struct mxs_fec_data mx28_fec_data[] __initconst; #define mx28_add_fec(id, pdata) \ mxs_add_fec(&mx28_fec_data[id], pdata) + +extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst; +#define mx28_add_flexcan(id, pdata) \ + mxs_add_flexcan(&mx28_flexcan_data[id], pdata) +#define mx28_add_flexcan0(pdata) mx28_add_flexcan(0, pdata) +#define mx28_add_flexcan1(pdata) mx28_add_flexcan(1, pdata) + +extern const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst; +#define mx28_add_mxs_i2c(id) mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id]) + +#define mx28_add_mxs_pwm(id) mxs_add_mxs_pwm(MX28_PWM_BASE_ADDR, id) + +struct platform_device *__init mx28_add_mxsfb( + const struct mxsfb_platform_data *pdata); diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c index c20d54740b0..cfdb6b28470 100644 --- a/arch/arm/mach-mxs/devices.c +++ b/arch/arm/mach-mxs/devices.c @@ -66,6 +66,8 @@ struct platform_device *__init mxs_add_platform_device_dmamask( ret = platform_device_add(pdev); if (ret) { err: + if (dmamask) + kfree(pdev->dev.dma_mask); platform_device_put(pdev); return ERR_PTR(ret); } diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig index cf7dc1ae575..1451ad060d8 100644 --- a/arch/arm/mach-mxs/devices/Kconfig +++ b/arch/arm/mach-mxs/devices/Kconfig @@ -2,5 +2,21 @@ config MXS_HAVE_AMBA_DUART bool select ARM_AMBA +config MXS_HAVE_PLATFORM_AUART + bool + config MXS_HAVE_PLATFORM_FEC bool + +config MXS_HAVE_PLATFORM_FLEXCAN + select HAVE_CAN_FLEXCAN if CAN + bool + +config MXS_HAVE_PLATFORM_MXS_I2C + bool + +config MXS_HAVE_PLATFORM_MXS_PWM + bool + +config MXS_HAVE_PLATFORM_MXSFB + bool diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile index d0a09f6934b..0d9bea30b0a 100644 --- a/arch/arm/mach-mxs/devices/Makefile +++ b/arch/arm/mach-mxs/devices/Makefile @@ -1,2 +1,8 @@ obj-$(CONFIG_MXS_HAVE_AMBA_DUART) += amba-duart.o +obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o +obj-y += platform-dma.o obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o +obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o +obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o +obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o +obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o diff --git a/arch/arm/mach-mxs/devices/platform-auart.c b/arch/arm/mach-mxs/devices/platform-auart.c new file mode 100644 index 00000000000..796606cce0c --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-auart.c @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2010 Pengutronix + * Sascha Hauer <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +#define mxs_auart_data_entry_single(soc, _id, hwid) \ + { \ + .id = _id, \ + .iobase = soc ## _AUART ## hwid ## _BASE_ADDR, \ + .irq = soc ## _INT_AUART ## hwid, \ + } + +#define mxs_auart_data_entry(soc, _id, hwid) \ + [_id] = mxs_auart_data_entry_single(soc, _id, hwid) + +#ifdef CONFIG_SOC_IMX23 +const struct mxs_auart_data mx23_auart_data[] __initconst = { +#define mx23_auart_data_entry(_id, hwid) \ + mxs_auart_data_entry(MX23, _id, hwid) + mx23_auart_data_entry(0, 1), + mx23_auart_data_entry(1, 2), +}; +#endif + +#ifdef CONFIG_SOC_IMX28 +const struct mxs_auart_data mx28_auart_data[] __initconst = { +#define mx28_auart_data_entry(_id) \ + mxs_auart_data_entry(MX28, _id, _id) + mx28_auart_data_entry(0), + mx28_auart_data_entry(1), + mx28_auart_data_entry(2), + mx28_auart_data_entry(3), + mx28_auart_data_entry(4), +}; +#endif + +struct platform_device *__init mxs_add_auart( + const struct mxs_auart_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return mxs_add_platform_device_dmamask("mxs-auart", data->id, + res, ARRAY_SIZE(res), NULL, 0, + DMA_BIT_MASK(32)); +} + diff --git a/arch/arm/mach-mxs/devices/platform-dma.c b/arch/arm/mach-mxs/devices/platform-dma.c new file mode 100644 index 00000000000..295c4424d5d --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-dma.c @@ -0,0 +1,49 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/compiler.h> +#include <linux/err.h> +#include <linux/init.h> + +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +static struct platform_device *__init mxs_add_dma(const char *devid, + resource_size_t base) +{ + struct resource res[] = { + { + .start = base, + .end = base + SZ_8K - 1, + .flags = IORESOURCE_MEM, + } + }; + + return mxs_add_platform_device_dmamask(devid, -1, + res, ARRAY_SIZE(res), NULL, 0, + DMA_BIT_MASK(32)); +} + +static int __init mxs_add_mxs_dma(void) +{ + char *apbh = "mxs-dma-apbh"; + char *apbx = "mxs-dma-apbx"; + + if (cpu_is_mx23()) { + mxs_add_dma(apbh, MX23_APBH_DMA_BASE_ADDR); + mxs_add_dma(apbx, MX23_APBX_DMA_BASE_ADDR); + } + + if (cpu_is_mx28()) { + mxs_add_dma(apbh, MX28_APBH_DMA_BASE_ADDR); + mxs_add_dma(apbx, MX28_APBX_DMA_BASE_ADDR); + } + + return 0; +} +arch_initcall(mxs_add_mxs_dma); diff --git a/arch/arm/mach-mxs/devices/platform-fec.c b/arch/arm/mach-mxs/devices/platform-fec.c index c42dff72b46..9859cf28333 100644 --- a/arch/arm/mach-mxs/devices/platform-fec.c +++ b/arch/arm/mach-mxs/devices/platform-fec.c @@ -45,6 +45,7 @@ struct platform_device *__init mxs_add_fec( }, }; - return mxs_add_platform_device("imx28-fec", data->id, - res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); + return mxs_add_platform_device_dmamask("imx28-fec", data->id, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata), + DMA_BIT_MASK(32)); } diff --git a/arch/arm/mach-mxs/devices/platform-flexcan.c b/arch/arm/mach-mxs/devices/platform-flexcan.c new file mode 100644 index 00000000000..43a6b4bae6f --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-flexcan.c @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2010, 2011 Pengutronix, + * Marc Kleine-Budde <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +#define mxs_flexcan_data_entry_single(soc, _id, _hwid, _size) \ + { \ + .id = _id, \ + .iobase = soc ## _CAN ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_CAN ## _hwid, \ + } + +#define mxs_flexcan_data_entry(soc, _id, _hwid, _size) \ + [_id] = mxs_flexcan_data_entry_single(soc, _id, _hwid, _size) + +#ifdef CONFIG_SOC_IMX28 +const struct mxs_flexcan_data mx28_flexcan_data[] __initconst = { +#define mx28_flexcan_data_entry(_id, _hwid) \ + mxs_flexcan_data_entry_single(MX28, _id, _hwid, SZ_8K) + mx28_flexcan_data_entry(0, 0), + mx28_flexcan_data_entry(1, 1), +}; +#endif /* ifdef CONFIG_SOC_IMX28 */ + +struct platform_device *__init mxs_add_flexcan( + const struct mxs_flexcan_data *data, + const struct flexcan_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return mxs_add_platform_device("flexcan", data->id, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); +} diff --git a/arch/arm/mach-mxs/devices/platform-mxs-i2c.c b/arch/arm/mach-mxs/devices/platform-mxs-i2c.c new file mode 100644 index 00000000000..eab3a06836d --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-mxs-i2c.c @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2011 Pengutronix + * Wolfram Sang <w.sang@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +#define mxs_i2c_data_entry_single(soc, _id) \ + { \ + .id = _id, \ + .iobase = soc ## _I2C ## _id ## _BASE_ADDR, \ + .errirq = soc ## _INT_I2C ## _id ## _ERROR, \ + .dmairq = soc ## _INT_I2C ## _id ## _DMA, \ + } + +#define mxs_i2c_data_entry(soc, _id) \ + [_id] = mxs_i2c_data_entry_single(soc, _id) + +#ifdef CONFIG_SOC_IMX28 +const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst = { + mxs_i2c_data_entry(MX28, 0), + mxs_i2c_data_entry(MX28, 1), +}; +#endif + +struct platform_device *__init mxs_add_mxs_i2c(const struct mxs_i2c_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->errirq, + .end = data->errirq, + .flags = IORESOURCE_IRQ, + }, { + .start = data->dmairq, + .end = data->dmairq, + .flags = IORESOURCE_IRQ, + }, + }; + + return mxs_add_platform_device("mxs-i2c", data->id, res, + ARRAY_SIZE(res), NULL, 0); +} diff --git a/arch/arm/mach-mxs/devices/platform-mxs-pwm.c b/arch/arm/mach-mxs/devices/platform-mxs-pwm.c new file mode 100644 index 00000000000..680f5a90293 --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-mxs-pwm.c @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2010 Pengutronix + * Sascha Hauer <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> +#include <mach/devices-common.h> + +struct platform_device *__init mxs_add_mxs_pwm(resource_size_t iobase, int id) +{ + struct resource res = { + .flags = IORESOURCE_MEM, + }; + + res.start = iobase + 0x10 + 0x20 * id; + res.end = res.start + 0x1f; + + return mxs_add_platform_device("mxs-pwm", id, &res, 1, NULL, 0); +} diff --git a/arch/arm/mach-mxs/devices/platform-mxsfb.c b/arch/arm/mach-mxs/devices/platform-mxsfb.c new file mode 100644 index 00000000000..bf72c9b8dbd --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-mxsfb.c @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2011 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> +#include <mach/mxsfb.h> + +#ifdef CONFIG_SOC_IMX23 +struct platform_device *__init mx23_add_mxsfb( + const struct mxsfb_platform_data *pdata) +{ + struct resource res[] = { + { + .start = MX23_LCDIF_BASE_ADDR, + .end = MX23_LCDIF_BASE_ADDR + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, + }; + + return mxs_add_platform_device_dmamask("imx23-fb", -1, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32)); +} +#endif /* ifdef CONFIG_SOC_IMX23 */ + +#ifdef CONFIG_SOC_IMX28 +struct platform_device *__init mx28_add_mxsfb( + const struct mxsfb_platform_data *pdata) +{ + struct resource res[] = { + { + .start = MX28_LCDIF_BASE_ADDR, + .end = MX28_LCDIF_BASE_ADDR + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, + }; + + return mxs_add_platform_device_dmamask("imx28-fb", -1, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32)); +} +#endif /* ifdef CONFIG_SOC_IMX28 */ diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c index 61991e4dde4..56fa2ed1522 100644 --- a/arch/arm/mach-mxs/gpio.c +++ b/arch/arm/mach-mxs/gpio.c @@ -182,6 +182,7 @@ static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable) } static struct irq_chip gpio_irq_chip = { + .name = "mxs gpio", .irq_ack = mxs_gpio_ack_irq, .irq_mask = mxs_gpio_mask_irq, .irq_unmask = mxs_gpio_unmask_irq, @@ -289,39 +290,42 @@ int __init mxs_gpio_init(struct mxs_gpio_port *port, int cnt) return 0; } -#define DEFINE_MXS_GPIO_PORT(soc, _id) \ +#define MX23_GPIO_BASE MX23_IO_ADDRESS(MX23_PINCTRL_BASE_ADDR) +#define MX28_GPIO_BASE MX28_IO_ADDRESS(MX28_PINCTRL_BASE_ADDR) + +#define DEFINE_MXS_GPIO_PORT(_base, _irq, _id) \ { \ .chip.label = "gpio-" #_id, \ .id = _id, \ - .irq = soc ## _INT_GPIO ## _id, \ - .base = soc ## _IO_ADDRESS( \ - soc ## _PINCTRL ## _BASE_ADDR), \ + .irq = _irq, \ + .base = _base, \ .virtual_irq_start = MXS_GPIO_IRQ_START + (_id) * 32, \ } -#define DEFINE_REGISTER_FUNCTION(prefix) \ -int __init prefix ## _register_gpios(void) \ -{ \ - return mxs_gpio_init(prefix ## _gpio_ports, \ - ARRAY_SIZE(prefix ## _gpio_ports)); \ -} - #ifdef CONFIG_SOC_IMX23 static struct mxs_gpio_port mx23_gpio_ports[] = { - DEFINE_MXS_GPIO_PORT(MX23, 0), - DEFINE_MXS_GPIO_PORT(MX23, 1), - DEFINE_MXS_GPIO_PORT(MX23, 2), + DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO0, 0), + DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO1, 1), + DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO2, 2), }; -DEFINE_REGISTER_FUNCTION(mx23) + +int __init mx23_register_gpios(void) +{ + return mxs_gpio_init(mx23_gpio_ports, ARRAY_SIZE(mx23_gpio_ports)); +} #endif #ifdef CONFIG_SOC_IMX28 static struct mxs_gpio_port mx28_gpio_ports[] = { - DEFINE_MXS_GPIO_PORT(MX28, 0), - DEFINE_MXS_GPIO_PORT(MX28, 1), - DEFINE_MXS_GPIO_PORT(MX28, 2), - DEFINE_MXS_GPIO_PORT(MX28, 3), - DEFINE_MXS_GPIO_PORT(MX28, 4), + DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO0, 0), + DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO1, 1), + DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO2, 2), + DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO3, 3), + DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO4, 4), }; -DEFINE_REGISTER_FUNCTION(mx28) + +int __init mx28_register_gpios(void) +{ + return mxs_gpio_init(mx28_gpio_ports, ARRAY_SIZE(mx28_gpio_ports)); +} #endif diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h index 59133eb3cc9..635bb5d9a20 100644 --- a/arch/arm/mach-mxs/include/mach/common.h +++ b/arch/arm/mach-mxs/include/mach/common.h @@ -13,6 +13,7 @@ struct clk; +extern const u32 *mxs_get_ocotp(void); extern int mxs_reset_block(void __iomem *); extern void mxs_timer_init(struct clk *, int); diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index 6c3d1a10343..71f24484b04 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -30,6 +30,16 @@ int __init mxs_add_amba_device(const struct amba_device *dev); /* duart */ int __init mxs_add_duart(const struct amba_device *dev); +/* auart */ +struct mxs_auart_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init mxs_add_auart( + const struct mxs_auart_data *data); + /* fec */ #include <linux/fec.h> struct mxs_fec_data { @@ -41,3 +51,28 @@ struct mxs_fec_data { struct platform_device *__init mxs_add_fec( const struct mxs_fec_data *data, const struct fec_platform_data *pdata); + +/* flexcan */ +#include <linux/can/platform/flexcan.h> +struct mxs_flexcan_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init mxs_add_flexcan( + const struct mxs_flexcan_data *data, + const struct flexcan_platform_data *pdata); + +/* i2c */ +struct mxs_i2c_data { + int id; + resource_size_t iobase; + resource_size_t errirq; + resource_size_t dmairq; +}; +struct platform_device * __init mxs_add_mxs_i2c(const struct mxs_i2c_data *data); + +/* pwm */ +struct platform_device *__init mxs_add_mxs_pwm( + resource_size_t iobase, int id); diff --git a/arch/arm/mach-mxs/include/mach/iomux-mx23.h b/arch/arm/mach-mxs/include/mach/iomux-mx23.h index 94e5dd83cdb..b0190a4822f 100644 --- a/arch/arm/mach-mxs/include/mach/iomux-mx23.h +++ b/arch/arm/mach-mxs/include/mach/iomux-mx23.h @@ -254,102 +254,102 @@ #define MX23_PAD_ROTARYB__GPMI_CE3N MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_2) /* MUXSEL_GPIO */ -#define MX23_PAD_GPMI_D00__GPO_0_0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D01__GPO_0_1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D02__GPO_0_2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D03__GPO_0_3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D04__GPO_0_4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D05__GPO_0_5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D06__GPO_0_6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D07__GPO_0_7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D08__GPO_0_8 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D09__GPO_0_9 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D10__GPO_0_10 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D11__GPO_0_11 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D12__GPO_0_12 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D13__GPO_0_13 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D14__GPO_0_14 MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D15__GPO_0_15 MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_CLE__GPO_0_16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_ALE__GPO_0_17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_CE2N__GPO_0_18 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_RDY0__GPO_0_19 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_RDY1__GPO_0_20 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_RDY2__GPO_0_21 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_RDY3__GPO_0_22 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_WPN__GPO_0_23 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_WRN__GPO_0_24 MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_RDN__GPO_0_25 MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO) -#define MX23_PAD_AUART1_CTS__GPO_0_26 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO) -#define MX23_PAD_AUART1_RTS__GPO_0_27 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO) -#define MX23_PAD_AUART1_RX__GPO_0_28 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO) -#define MX23_PAD_AUART1_TX__GPO_0_29 MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_GPIO) -#define MX23_PAD_I2C_SCL__GPO_0_30 MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_GPIO) -#define MX23_PAD_I2C_SDA__GPO_0_31 MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D00__GPIO_0_0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D01__GPIO_0_1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D02__GPIO_0_2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D03__GPIO_0_3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D04__GPIO_0_4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D05__GPIO_0_5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D06__GPIO_0_6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D07__GPIO_0_7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D08__GPIO_0_8 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D09__GPIO_0_9 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D10__GPIO_0_10 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D11__GPIO_0_11 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D12__GPIO_0_12 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D13__GPIO_0_13 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D14__GPIO_0_14 MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D15__GPIO_0_15 MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_CLE__GPIO_0_16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_ALE__GPIO_0_17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_CE2N__GPIO_0_18 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_RDY0__GPIO_0_19 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_RDY1__GPIO_0_20 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_RDY2__GPIO_0_21 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_RDY3__GPIO_0_22 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_WPN__GPIO_0_23 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_WRN__GPIO_0_24 MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_RDN__GPIO_0_25 MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO) +#define MX23_PAD_AUART1_CTS__GPIO_0_26 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO) +#define MX23_PAD_AUART1_RTS__GPIO_0_27 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO) +#define MX23_PAD_AUART1_RX__GPIO_0_28 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO) +#define MX23_PAD_AUART1_TX__GPIO_0_29 MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_GPIO) +#define MX23_PAD_I2C_SCL__GPIO_0_30 MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_GPIO) +#define MX23_PAD_I2C_SDA__GPIO_0_31 MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D00__GPO_1_0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D01__GPO_1_1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D02__GPO_1_2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D03__GPO_1_3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D04__GPO_1_4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D05__GPO_1_5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D06__GPO_1_6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D07__GPO_1_7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D08__GPO_1_8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D09__GPO_1_9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D10__GPO_1_10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D11__GPO_1_11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D12__GPO_1_12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D13__GPO_1_13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D14__GPO_1_14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D15__GPO_1_15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D16__GPO_1_16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D17__GPO_1_17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_RESET__GPO_1_18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_RS__GPO_1_19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_WR__GPO_1_20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_CS__GPO_1_21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_DOTCK__GPO_1_22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_ENABLE__GPO_1_23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_HSYNC__GPO_1_24 MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_VSYNC__GPO_1_25 MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO) -#define MX23_PAD_PWM0__GPO_1_26 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO) -#define MX23_PAD_PWM1__GPO_1_27 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO) -#define MX23_PAD_PWM2__GPO_1_28 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO) -#define MX23_PAD_PWM3__GPO_1_29 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO) -#define MX23_PAD_PWM4__GPO_1_30 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D00__GPIO_1_0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D01__GPIO_1_1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D02__GPIO_1_2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D03__GPIO_1_3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D04__GPIO_1_4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D05__GPIO_1_5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D06__GPIO_1_6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D07__GPIO_1_7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D08__GPIO_1_8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D09__GPIO_1_9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D10__GPIO_1_10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D11__GPIO_1_11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D12__GPIO_1_12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D13__GPIO_1_13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D14__GPIO_1_14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D15__GPIO_1_15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D16__GPIO_1_16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D17__GPIO_1_17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_RESET__GPIO_1_18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_RS__GPIO_1_19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_WR__GPIO_1_20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_CS__GPIO_1_21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_DOTCK__GPIO_1_22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_ENABLE__GPIO_1_23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_HSYNC__GPIO_1_24 MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_VSYNC__GPIO_1_25 MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO) +#define MX23_PAD_PWM0__GPIO_1_26 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO) +#define MX23_PAD_PWM1__GPIO_1_27 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO) +#define MX23_PAD_PWM2__GPIO_1_28 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO) +#define MX23_PAD_PWM3__GPIO_1_29 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO) +#define MX23_PAD_PWM4__GPIO_1_30 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_CMD__GPO_2_0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_DETECT__GPO_2_1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_DATA0__GPO_2_2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_DATA1__GPO_2_3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_DATA2__GPO_2_4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_DATA3__GPO_2_5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_SCK__GPO_2_6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_GPIO) -#define MX23_PAD_ROTARYA__GPO_2_7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_GPIO) -#define MX23_PAD_ROTARYB__GPO_2_8 MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A00__GPO_2_9 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A01__GPO_2_10 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A02__GPO_2_11 MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A03__GPO_2_12 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A04__GPO_2_13 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A05__GPO_2_14 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A06__GPO_2_15 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A07__GPO_2_16 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A08__GPO_2_17 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A09__GPO_2_18 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A10__GPO_2_19 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A11__GPO_2_20 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A12__GPO_2_21 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_BA0__GPO_2_22 MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_BA1__GPO_2_23 MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_CASN__GPO_2_24 MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_CE0N__GPO_2_25 MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_CE1N__GPO_2_26 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_CE1N__GPO_2_27 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_CE0N__GPO_2_28 MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_CKE__GPO_2_29 MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_RASN__GPO_2_30 MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_WEN__GPO_2_31 MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_CMD__GPIO_2_0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_DETECT__GPIO_2_1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_DATA0__GPIO_2_2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_DATA1__GPIO_2_3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_DATA2__GPIO_2_4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_DATA3__GPIO_2_5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_SCK__GPIO_2_6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_GPIO) +#define MX23_PAD_ROTARYA__GPIO_2_7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_GPIO) +#define MX23_PAD_ROTARYB__GPIO_2_8 MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A00__GPIO_2_9 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A01__GPIO_2_10 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A02__GPIO_2_11 MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A03__GPIO_2_12 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A04__GPIO_2_13 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A05__GPIO_2_14 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A06__GPIO_2_15 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A07__GPIO_2_16 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A08__GPIO_2_17 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A09__GPIO_2_18 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A10__GPIO_2_19 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A11__GPIO_2_20 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A12__GPIO_2_21 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_BA0__GPIO_2_22 MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_BA1__GPIO_2_23 MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_CASN__GPIO_2_24 MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_CE0N__GPIO_2_25 MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_CE1N__GPIO_2_26 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_CE1N__GPIO_2_27 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_CE0N__GPIO_2_28 MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_CKE__GPIO_2_29 MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_RASN__GPIO_2_30 MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_WEN__GPIO_2_31 MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_GPIO) #endif /* __MACH_IOMUX_MX23_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/iomux.h b/arch/arm/mach-mxs/include/mach/iomux.h index fe558e3c5a9..7abdf58b8bb 100644 --- a/arch/arm/mach-mxs/include/mach/iomux.h +++ b/arch/arm/mach-mxs/include/mach/iomux.h @@ -91,6 +91,9 @@ typedef u32 iomux_cfg_t; #define MXS_PAD_PULLUP ((PAD_PULLUP << MXS_PAD_PULL_SHIFT) | \ MXS_PAD_PULL_VALID_MASK) +/* generic pad control used in most cases */ +#define MXS_PAD_CTRL (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL) + #define MXS_IOMUX_PAD(_bank, _pin, _muxsel, _ma, _vol, _pull) \ (((iomux_cfg_t)(_bank) << MXS_PAD_BANK_SHIFT) | \ ((iomux_cfg_t)(_pin) << MXS_PAD_PIN_SHIFT) | \ diff --git a/arch/arm/mach-mxs/include/mach/mx23.h b/arch/arm/mach-mxs/include/mach/mx23.h index 9edd02ec8e3..c0a18c23084 100644 --- a/arch/arm/mach-mxs/include/mach/mx23.h +++ b/arch/arm/mach-mxs/include/mach/mx23.h @@ -93,7 +93,7 @@ #define MX23_INT_USB_WAKEUP 12 #define MX23_INT_GPMI_DMA 13 #define MX23_INT_SSP1_DMA 14 -#define MX23_INT_SSP_ERROR 15 +#define MX23_INT_SSP1_ERROR 15 #define MX23_INT_GPIO0 16 #define MX23_INT_GPIO1 17 #define MX23_INT_GPIO2 18 @@ -101,9 +101,9 @@ #define MX23_INT_SSP2_DMA 20 #define MX23_INT_ECC8_IRQ 21 #define MX23_INT_RTC_ALARM 22 -#define MX23_INT_UARTAPP_TX_DMA 23 -#define MX23_INT_UARTAPP_INTERNAL 24 -#define MX23_INT_UARTAPP_RX_DMA 25 +#define MX23_INT_AUART1_TX_DMA 23 +#define MX23_INT_AUART1 24 +#define MX23_INT_AUART1_RX_DMA 25 #define MX23_INT_I2C_DMA 26 #define MX23_INT_I2C_ERROR 27 #define MX23_INT_TIMER0 28 @@ -135,11 +135,35 @@ #define MX23_INT_DCP 54 #define MX23_INT_BCH 56 #define MX23_INT_PXP 57 -#define MX23_INT_UARTAPP2_TX_DMA 58 -#define MX23_INT_UARTAPP2_INTERNAL 59 -#define MX23_INT_UARTAPP2_RX_DMA 60 +#define MX23_INT_AUART2_TX_DMA 58 +#define MX23_INT_AUART2 59 +#define MX23_INT_AUART2_RX_DMA 60 #define MX23_INT_VDAC_DETECT 61 #define MX23_INT_VDD5V_DROOP 64 #define MX23_INT_DCDC4P2_BO 65 +/* + * APBH DMA + */ +#define MX23_DMA_SSP1 1 +#define MX23_DMA_SSP2 2 +#define MX23_DMA_GPMI0 4 +#define MX23_DMA_GPMI1 5 +#define MX23_DMA_GPMI2 6 +#define MX23_DMA_GPMI3 7 + +/* + * APBX DMA + */ +#define MX23_DMA_ADC 0 +#define MX23_DMA_DAC 1 +#define MX23_DMA_SPDIF 2 +#define MX23_DMA_I2C 3 +#define MX23_DMA_SAIF0 4 +#define MX23_DMA_UART0_RX 6 +#define MX23_DMA_UART0_TX 7 +#define MX23_DMA_UART1_RX 8 +#define MX23_DMA_UART1_TX 9 +#define MX23_DMA_SAIF1 10 + #endif /* __MACH_MX23_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h index 0716745267a..75d86118b76 100644 --- a/arch/arm/mach-mxs/include/mach/mx28.h +++ b/arch/arm/mach-mxs/include/mach/mx28.h @@ -163,10 +163,10 @@ #define MX28_INT_USB0 93 #define MX28_INT_USB1_WAKEUP 94 #define MX28_INT_USB0_WAKEUP 95 -#define MX28_INT_SSP0 96 -#define MX28_INT_SSP1 97 -#define MX28_INT_SSP2 98 -#define MX28_INT_SSP3 99 +#define MX28_INT_SSP0_ERROR 96 +#define MX28_INT_SSP1_ERROR 97 +#define MX28_INT_SSP2_ERROR 98 +#define MX28_INT_SSP3_ERROR 99 #define MX28_INT_ENET_SWI 100 #define MX28_INT_ENET_MAC0 101 #define MX28_INT_ENET_MAC1 102 @@ -185,4 +185,41 @@ #define MX28_INT_GPIO1 126 #define MX28_INT_GPIO0 127 +/* + * APBH DMA + */ +#define MX28_DMA_SSP0 0 +#define MX28_DMA_SSP1 1 +#define MX28_DMA_SSP2 2 +#define MX28_DMA_SSP3 3 +#define MX28_DMA_GPMI0 4 +#define MX28_DMA_GPMI1 5 +#define MX28_DMA_GPMI2 6 +#define MX28_DMA_GPMI3 7 +#define MX28_DMA_GPMI4 8 +#define MX28_DMA_GPMI5 9 +#define MX28_DMA_GPMI6 10 +#define MX28_DMA_GPMI7 11 +#define MX28_DMA_HSADC 12 +#define MX28_DMA_LCDIF 13 + +/* + * APBX DMA + */ +#define MX28_DMA_AUART4_RX 0 +#define MX28_DMA_AUART4_TX 1 +#define MX28_DMA_SPDIF_TX 2 +#define MX28_DMA_SAIF0 4 +#define MX28_DMA_SAIF1 5 +#define MX28_DMA_I2C0 6 +#define MX28_DMA_I2C1 7 +#define MX28_DMA_AUART0_RX 8 +#define MX28_DMA_AUART0_TX 9 +#define MX28_DMA_AUART1_RX 10 +#define MX28_DMA_AUART1_TX 11 +#define MX28_DMA_AUART2_RX 12 +#define MX28_DMA_AUART2_TX 13 +#define MX28_DMA_AUART3_RX 14 +#define MX28_DMA_AUART3_TX 15 + #endif /* __MACH_MX28_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h index f186c08c291..35a89dd2724 100644 --- a/arch/arm/mach-mxs/include/mach/mxs.h +++ b/arch/arm/mach-mxs/include/mach/mxs.h @@ -28,8 +28,13 @@ /* * MXS CPU types */ -#define cpu_is_mx23() (machine_is_mx23evk()) -#define cpu_is_mx28() (machine_is_mx28evk()) +#define cpu_is_mx23() ( \ + machine_is_mx23evk() || \ + 0) +#define cpu_is_mx28() ( \ + machine_is_mx28evk() || \ + machine_is_tx28() || \ + 0) /* * IO addresses common to MXS-based diff --git a/arch/arm/mach-mxs/include/mach/mxsfb.h b/arch/arm/mach-mxs/include/mach/mxsfb.h new file mode 100644 index 00000000000..e4d79791515 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/mxsfb.h @@ -0,0 +1,49 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_FB_H +#define __MACH_FB_H + +#include <linux/fb.h> + +#define STMLCDIF_8BIT 1 /** pixel data bus to the display is of 8 bit width */ +#define STMLCDIF_16BIT 0 /** pixel data bus to the display is of 16 bit width */ +#define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */ +#define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */ + +#define FB_SYNC_DATA_ENABLE_HIGH_ACT (1 << 6) +#define FB_SYNC_DOTCLK_FAILING_ACT (1 << 7) /* failing/negtive edge sampling */ + +struct mxsfb_platform_data { + struct fb_videomode *mode_list; + unsigned mode_count; + + unsigned default_bpp; + + unsigned dotclk_delay; /* refer manual HW_LCDIF_VDCTRL4 register */ + unsigned ld_intf_width; /* refer STMLCDIF_* macros */ + + unsigned fb_size; /* Size of the video memory. If zero a + * default will be used + */ + unsigned long fb_phys; /* physical address for the video memory. If + * zero the framebuffer memory will be dynamically + * allocated. If specified,fb_size must also be specified. + * fb_phys must be unused by Linux. + */ +}; + +#endif /* __MACH_FB_H */ diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h index a005e76f34f..f12a1732d8b 100644 --- a/arch/arm/mach-mxs/include/mach/uncompress.h +++ b/arch/arm/mach-mxs/include/mach/uncompress.h @@ -63,6 +63,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id) mxs_duart_base = MX23_DUART_BASE_ADDR; break; case MACH_TYPE_MX28EVK: + case MACH_TYPE_TX28: mxs_duart_base = MX28_DUART_BASE_ADDR; break; default: diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c index aa0640052f5..a66994f0518 100644 --- a/arch/arm/mach-mxs/mach-mx23evk.c +++ b/arch/arm/mach-mxs/mach-mx23evk.c @@ -26,17 +26,103 @@ #include "devices-mx23.h" +#define MX23EVK_LCD_ENABLE MXS_GPIO_NR(1, 18) +#define MX23EVK_BL_ENABLE MXS_GPIO_NR(1, 28) + static const iomux_cfg_t mx23evk_pads[] __initconst = { /* duart */ - MX23_PAD_PWM0__DUART_RX | MXS_PAD_4MA, - MX23_PAD_PWM1__DUART_TX | MXS_PAD_4MA, + MX23_PAD_PWM0__DUART_RX | MXS_PAD_CTRL, + MX23_PAD_PWM1__DUART_TX | MXS_PAD_CTRL, + + /* auart */ + MX23_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL, + MX23_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL, + MX23_PAD_AUART1_CTS__AUART1_CTS | MXS_PAD_CTRL, + MX23_PAD_AUART1_RTS__AUART1_RTS | MXS_PAD_CTRL, + + /* mxsfb (lcdif) */ + MX23_PAD_LCD_D00__LCD_D00 | MXS_PAD_CTRL, + MX23_PAD_LCD_D01__LCD_D01 | MXS_PAD_CTRL, + MX23_PAD_LCD_D02__LCD_D02 | MXS_PAD_CTRL, + MX23_PAD_LCD_D03__LCD_D03 | MXS_PAD_CTRL, + MX23_PAD_LCD_D04__LCD_D04 | MXS_PAD_CTRL, + MX23_PAD_LCD_D05__LCD_D05 | MXS_PAD_CTRL, + MX23_PAD_LCD_D06__LCD_D06 | MXS_PAD_CTRL, + MX23_PAD_LCD_D07__LCD_D07 | MXS_PAD_CTRL, + MX23_PAD_LCD_D08__LCD_D08 | MXS_PAD_CTRL, + MX23_PAD_LCD_D09__LCD_D09 | MXS_PAD_CTRL, + MX23_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL, + MX23_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL, + MX23_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL, + MX23_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL, + MX23_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL, + MX23_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL, + MX23_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL, + MX23_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL, + MX23_PAD_GPMI_D08__LCD_D18 | MXS_PAD_CTRL, + MX23_PAD_GPMI_D09__LCD_D19 | MXS_PAD_CTRL, + MX23_PAD_GPMI_D10__LCD_D20 | MXS_PAD_CTRL, + MX23_PAD_GPMI_D11__LCD_D21 | MXS_PAD_CTRL, + MX23_PAD_GPMI_D12__LCD_D22 | MXS_PAD_CTRL, + MX23_PAD_GPMI_D13__LCD_D23 | MXS_PAD_CTRL, + MX23_PAD_LCD_VSYNC__LCD_VSYNC | MXS_PAD_CTRL, + MX23_PAD_LCD_HSYNC__LCD_HSYNC | MXS_PAD_CTRL, + MX23_PAD_LCD_DOTCK__LCD_DOTCK | MXS_PAD_CTRL, + MX23_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL, + /* LCD panel enable */ + MX23_PAD_LCD_RESET__GPIO_1_18 | MXS_PAD_CTRL, + /* backlight control */ + MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_CTRL, +}; + +/* mxsfb (lcdif) */ +static struct fb_videomode mx23evk_video_modes[] = { + { + .name = "Samsung-LMS430HF02", + .refresh = 60, + .xres = 480, + .yres = 272, + .pixclock = 108096, /* picosecond (9.2 MHz) */ + .left_margin = 15, + .right_margin = 8, + .upper_margin = 12, + .lower_margin = 4, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT | + FB_SYNC_DOTCLK_FAILING_ACT, + }, +}; + +static const struct mxsfb_platform_data mx23evk_mxsfb_pdata __initconst = { + .mode_list = mx23evk_video_modes, + .mode_count = ARRAY_SIZE(mx23evk_video_modes), + .default_bpp = 32, + .ld_intf_width = STMLCDIF_24BIT, }; static void __init mx23evk_init(void) { + int ret; + mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads)); mx23_add_duart(); + mx23_add_auart0(); + + ret = gpio_request_one(MX23EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable"); + if (ret) + pr_warn("failed to request gpio lcd-enable: %d\n", ret); + else + gpio_set_value(MX23EVK_LCD_ENABLE, 1); + + ret = gpio_request_one(MX23EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable"); + if (ret) + pr_warn("failed to request gpio bl-enable: %d\n", ret); + else + gpio_set_value(MX23EVK_BL_ENABLE, 1); + + mx23_add_mxsfb(&mx23evk_mxsfb_pdata); } static void __init mx23evk_timer_init(void) diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index 8e2c5975001..08002d02267 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -28,54 +28,93 @@ #include "devices-mx28.h" #include "gpio.h" +#define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13) #define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15) +#define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18) +#define MX28EVK_LCD_ENABLE MXS_GPIO_NR(3, 30) #define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13) static const iomux_cfg_t mx28evk_pads[] __initconst = { /* duart */ - MX28_PAD_PWM0__DUART_RX | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - MX28_PAD_PWM1__DUART_TX | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL, + MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL, + /* auart0 */ + MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL, + MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL, + MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL, + MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL, + /* auart3 */ + MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL, + MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL, + MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL, + MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL, + +#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP) /* fec0 */ - MX28_PAD_ENET0_MDC__ENET0_MDC | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_MDIO__ENET0_MDIO | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_RXD0__ENET0_RXD0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_RXD1__ENET0_RXD1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_TXD0__ENET0_TXD0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_TXD1__ENET0_TXD1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET_CLK__CLKCTRL_ENET | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC, + MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC, + MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC, + MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC, + MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC, + MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC, + MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC, + MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC, + MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC, /* fec1 */ - MX28_PAD_ENET0_CRS__ENET1_RX_EN | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_RXD2__ENET1_RXD0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_RXD3__ENET1_RXD1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_COL__ENET1_TX_EN | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_TXD2__ENET1_TXD0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_TXD3__ENET1_TXD1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC, + MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC, + MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC, + MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC, + MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC, + MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC, /* phy power line */ - MX28_PAD_SSP1_DATA3__GPIO_2_15 | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_SSP1_DATA3__GPIO_2_15 | MXS_PAD_CTRL, /* phy reset line */ - MX28_PAD_ENET0_RX_CLK__GPIO_4_13 | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_ENET0_RX_CLK__GPIO_4_13 | MXS_PAD_CTRL, + + /* flexcan0 */ + MX28_PAD_GPMI_RDY2__CAN0_TX, + MX28_PAD_GPMI_RDY3__CAN0_RX, + /* flexcan1 */ + MX28_PAD_GPMI_CE2N__CAN1_TX, + MX28_PAD_GPMI_CE3N__CAN1_RX, + /* transceiver power control */ + MX28_PAD_SSP1_CMD__GPIO_2_13, + + /* mxsfb (lcdif) */ + MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL, + MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL, + MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL, + MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL, + MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL, + MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL, + MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL, + MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL, + MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL, + MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL, + MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL, + MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL, + MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL, + MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL, + MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL, + MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL, + MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL, + MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL, + MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL, + MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL, + MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL, + MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL, + MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL, + MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL, + MX28_PAD_LCD_RD_E__LCD_VSYNC | MXS_PAD_CTRL, + MX28_PAD_LCD_WR_RWN__LCD_HSYNC | MXS_PAD_CTRL, + MX28_PAD_LCD_RS__LCD_DOTCLK | MXS_PAD_CTRL, + MX28_PAD_LCD_CS__LCD_ENABLE | MXS_PAD_CTRL, + /* LCD panel enable */ + MX28_PAD_LCD_RESET__GPIO_3_30 | MXS_PAD_CTRL, + /* backlight control */ + MX28_PAD_PWM2__GPIO_3_18 | MXS_PAD_CTRL, }; /* fec */ @@ -119,7 +158,7 @@ static void __init mx28evk_fec_reset(void) gpio_set_value(MX28EVK_FEC_PHY_RESET, 1); } -static struct fec_platform_data mx28_fec_pdata[] = { +static struct fec_platform_data mx28_fec_pdata[] __initdata = { { /* fec0 */ .phy = PHY_INTERFACE_MODE_RMII, @@ -129,15 +168,135 @@ static struct fec_platform_data mx28_fec_pdata[] = { }, }; +static int __init mx28evk_fec_get_mac(void) +{ + int i; + u32 val; + const u32 *ocotp = mxs_get_ocotp(); + + if (!ocotp) + goto error; + + /* + * OCOTP only stores the last 4 octets for each mac address, + * so hard-code Freescale OUI (00:04:9f) here. + */ + for (i = 0; i < 2; i++) { + val = ocotp[i * 4]; + mx28_fec_pdata[i].mac[0] = 0x00; + mx28_fec_pdata[i].mac[1] = 0x04; + mx28_fec_pdata[i].mac[2] = 0x9f; + mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff; + mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff; + mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff; + } + + return 0; + +error: + pr_err("%s: timeout when reading fec mac from OCOTP\n", __func__); + return -ETIMEDOUT; +} + +/* + * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers + */ +static int flexcan0_en, flexcan1_en; + +static void mx28evk_flexcan_switch(void) +{ + if (flexcan0_en || flexcan1_en) + gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1); + else + gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0); +} + +static void mx28evk_flexcan0_switch(int enable) +{ + flexcan0_en = enable; + mx28evk_flexcan_switch(); +} + +static void mx28evk_flexcan1_switch(int enable) +{ + flexcan1_en = enable; + mx28evk_flexcan_switch(); +} + +static const struct flexcan_platform_data + mx28evk_flexcan_pdata[] __initconst = { + { + .transceiver_switch = mx28evk_flexcan0_switch, + }, { + .transceiver_switch = mx28evk_flexcan1_switch, + } +}; + +/* mxsfb (lcdif) */ +static struct fb_videomode mx28evk_video_modes[] = { + { + .name = "Seiko-43WVF1G", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 29851, /* picosecond (33.5 MHz) */ + .left_margin = 89, + .right_margin = 164, + .upper_margin = 23, + .lower_margin = 10, + .hsync_len = 10, + .vsync_len = 10, + .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT | + FB_SYNC_DOTCLK_FAILING_ACT, + }, +}; + +static const struct mxsfb_platform_data mx28evk_mxsfb_pdata __initconst = { + .mode_list = mx28evk_video_modes, + .mode_count = ARRAY_SIZE(mx28evk_video_modes), + .default_bpp = 32, + .ld_intf_width = STMLCDIF_24BIT, +}; + static void __init mx28evk_init(void) { + int ret; + mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads)); mx28_add_duart(); + mx28_add_auart0(); + mx28_add_auart3(); + + if (mx28evk_fec_get_mac()) + pr_warn("%s: failed on fec mac setup\n", __func__); mx28evk_fec_reset(); mx28_add_fec(0, &mx28_fec_pdata[0]); mx28_add_fec(1, &mx28_fec_pdata[1]); + + ret = gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, + "flexcan-switch"); + if (ret) { + pr_err("failed to request gpio flexcan-switch: %d\n", ret); + } else { + mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]); + mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]); + } + + ret = gpio_request_one(MX28EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable"); + if (ret) + pr_warn("failed to request gpio lcd-enable: %d\n", ret); + else + gpio_set_value(MX28EVK_LCD_ENABLE, 1); + + ret = gpio_request_one(MX28EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable"); + if (ret) + pr_warn("failed to request gpio bl-enable: %d\n", ret); + else + gpio_set_value(MX28EVK_BL_ENABLE, 1); + + mx28_add_mxsfb(&mx28evk_mxsfb_pdata); } static void __init mx28evk_timer_init(void) diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c new file mode 100644 index 00000000000..b65e3719cbc --- /dev/null +++ b/arch/arm/mach-mxs/mach-tx28.c @@ -0,0 +1,183 @@ +/* + * Copyright (C) 2010 <LW@KARO-electronics.de> + * + * based on: mach-mx28_evk.c + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation + */ +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> +#include <linux/i2c.h> + +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include <mach/common.h> +#include <mach/iomux-mx28.h> + +#include "devices-mx28.h" +#include "module-tx28.h" + +#define TX28_STK5_GPIO_LED MXS_GPIO_NR(4, 10) + +static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = { + /* LED */ + MX28_PAD_ENET0_RXD3__GPIO_4_10 | + MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL, + + /* framebuffer */ +#define LCD_MODE (MXS_PAD_3V3 | MXS_PAD_4MA) + MX28_PAD_LCD_D00__LCD_D0 | LCD_MODE, + MX28_PAD_LCD_D01__LCD_D1 | LCD_MODE, + MX28_PAD_LCD_D02__LCD_D2 | LCD_MODE, + MX28_PAD_LCD_D03__LCD_D3 | LCD_MODE, + MX28_PAD_LCD_D04__LCD_D4 | LCD_MODE, + MX28_PAD_LCD_D05__LCD_D5 | LCD_MODE, + MX28_PAD_LCD_D06__LCD_D6 | LCD_MODE, + MX28_PAD_LCD_D07__LCD_D7 | LCD_MODE, + MX28_PAD_LCD_D08__LCD_D8 | LCD_MODE, + MX28_PAD_LCD_D09__LCD_D9 | LCD_MODE, + MX28_PAD_LCD_D10__LCD_D10 | LCD_MODE, + MX28_PAD_LCD_D11__LCD_D11 | LCD_MODE, + MX28_PAD_LCD_D12__LCD_D12 | LCD_MODE, + MX28_PAD_LCD_D13__LCD_D13 | LCD_MODE, + MX28_PAD_LCD_D14__LCD_D14 | LCD_MODE, + MX28_PAD_LCD_D15__LCD_D15 | LCD_MODE, + MX28_PAD_LCD_D16__LCD_D16 | LCD_MODE, + MX28_PAD_LCD_D17__LCD_D17 | LCD_MODE, + MX28_PAD_LCD_D18__LCD_D18 | LCD_MODE, + MX28_PAD_LCD_D19__LCD_D19 | LCD_MODE, + MX28_PAD_LCD_D20__LCD_D20 | LCD_MODE, + MX28_PAD_LCD_D21__LCD_D21 | LCD_MODE, + MX28_PAD_LCD_D22__LCD_D22 | LCD_MODE, + MX28_PAD_LCD_D23__LCD_D23 | LCD_MODE, + MX28_PAD_LCD_RD_E__LCD_VSYNC | LCD_MODE, + MX28_PAD_LCD_WR_RWN__LCD_HSYNC | LCD_MODE, + MX28_PAD_LCD_RS__LCD_DOTCLK | LCD_MODE, + MX28_PAD_LCD_CS__LCD_CS | LCD_MODE, + MX28_PAD_LCD_VSYNC__LCD_VSYNC | LCD_MODE, + MX28_PAD_LCD_HSYNC__LCD_HSYNC | LCD_MODE, + MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | LCD_MODE, + MX28_PAD_LCD_ENABLE__GPIO_1_31 | LCD_MODE, + MX28_PAD_LCD_RESET__GPIO_3_30 | LCD_MODE, + MX28_PAD_PWM0__PWM_0 | LCD_MODE, + + /* UART1 */ + MX28_PAD_AUART0_CTS__DUART_RX, + MX28_PAD_AUART0_RTS__DUART_TX, + MX28_PAD_AUART0_TX__DUART_RTS, + MX28_PAD_AUART0_RX__DUART_CTS, + + /* UART2 */ + MX28_PAD_AUART1_RX__AUART1_RX, + MX28_PAD_AUART1_TX__AUART1_TX, + MX28_PAD_AUART1_RTS__AUART1_RTS, + MX28_PAD_AUART1_CTS__AUART1_CTS, + + /* CAN */ + MX28_PAD_GPMI_RDY2__CAN0_TX, + MX28_PAD_GPMI_RDY3__CAN0_RX, + + /* I2C */ + MX28_PAD_I2C0_SCL__I2C0_SCL, + MX28_PAD_I2C0_SDA__I2C0_SDA, + + /* TSC2007 */ + MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP, + + /* MMC0 */ + MX28_PAD_SSP0_DATA0__SSP0_D0 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA1__SSP0_D1 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA2__SSP0_D2 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA3__SSP0_D3 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA4__SSP0_D4 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA5__SSP0_D5 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA6__SSP0_D6 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA7__SSP0_D7 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_CMD__SSP0_CMD | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_SSP0_SCK__SSP0_SCK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), +}; + +static struct gpio_led tx28_stk5v3_leds[] = { + { + .name = "GPIO-LED", + .default_trigger = "heartbeat", + .gpio = TX28_STK5_GPIO_LED, + }, +}; + +static const struct gpio_led_platform_data tx28_stk5v3_led_data __initconst = { + .leds = tx28_stk5v3_leds, + .num_leds = ARRAY_SIZE(tx28_stk5v3_leds), +}; + +static struct spi_board_info tx28_spi_board_info[] = { + { + .modalias = "spidev", + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 1, + .controller_data = (void *)SPI_GPIO_NO_CHIPSELECT, + .mode = SPI_MODE_0, + }, +}; + +static struct i2c_board_info tx28_stk5v3_i2c_boardinfo[] __initdata = { + { + I2C_BOARD_INFO("ds1339", 0x68), + }, +}; + +static void __init tx28_stk5v3_init(void) +{ + mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads, + ARRAY_SIZE(tx28_stk5v3_pads)); + + mx28_add_duart(); /* UART1 */ + mx28_add_auart(1); /* UART2 */ + + tx28_add_fec0(); + /* spi via ssp will be added when available */ + spi_register_board_info(tx28_spi_board_info, + ARRAY_SIZE(tx28_spi_board_info)); + mxs_add_platform_device("leds-gpio", 0, NULL, 0, + &tx28_stk5v3_led_data, sizeof(tx28_stk5v3_led_data)); + mx28_add_mxs_i2c(0); + i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo, + ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo)); +} + +static void __init tx28_timer_init(void) +{ + mx28_clocks_init(); +} + +static struct sys_timer tx28_timer = { + .init = tx28_timer_init, +}; + +MACHINE_START(TX28, "Ka-Ro electronics TX28 module") + .map_io = mx28_map_io, + .init_irq = mx28_init_irq, + .init_machine = tx28_stk5v3_init, + .timer = &tx28_timer, +MACHINE_END diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c new file mode 100644 index 00000000000..fa0b154da67 --- /dev/null +++ b/arch/arm/mach-mxs/module-tx28.c @@ -0,0 +1,131 @@ +/* + * Copyright (C) 2010 <LW@KARO-electronics.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/fec.h> +#include <linux/gpio.h> + +#include <mach/iomux-mx28.h> +#include "../devices-mx28.h" + +#include "module-tx28.h" + +#define TX28_FEC_PHY_POWER MXS_GPIO_NR(3, 29) +#define TX28_FEC_PHY_RESET MXS_GPIO_NR(4, 13) + +static const iomux_cfg_t tx28_fec_gpio_pads[] __initconst = { + /* PHY POWER */ + MX28_PAD_PWM4__GPIO_3_29 | + MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3, + /* PHY RESET */ + MX28_PAD_ENET0_RX_CLK__GPIO_4_13 | + MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3, + /* Mode strap pins 0-2 */ + MX28_PAD_ENET0_RXD0__GPIO_4_3 | + MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3, + MX28_PAD_ENET0_RXD1__GPIO_4_4 | + MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3, + MX28_PAD_ENET0_RX_EN__GPIO_4_2 | + MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3, + /* nINT */ + MX28_PAD_ENET0_TX_CLK__GPIO_4_5 | + MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3, + + MX28_PAD_ENET0_MDC__GPIO_4_0, + MX28_PAD_ENET0_MDIO__GPIO_4_1, + MX28_PAD_ENET0_TX_EN__GPIO_4_6, + MX28_PAD_ENET0_TXD0__GPIO_4_7, + MX28_PAD_ENET0_TXD1__GPIO_4_8, + MX28_PAD_ENET_CLK__GPIO_4_16, +}; + +#define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3) +static const iomux_cfg_t tx28_fec_pads[] __initconst = { + MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE, + MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE, + MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE, + MX28_PAD_ENET0_RXD0__ENET0_RXD0 | FEC_MODE, + MX28_PAD_ENET0_RXD1__ENET0_RXD1 | FEC_MODE, + MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | FEC_MODE, + MX28_PAD_ENET0_TXD0__ENET0_TXD0 | FEC_MODE, + MX28_PAD_ENET0_TXD1__ENET0_TXD1 | FEC_MODE, + MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE, +}; + +static const struct fec_platform_data tx28_fec_data __initconst = { + .phy = PHY_INTERFACE_MODE_RMII, +}; + +int __init tx28_add_fec0(void) +{ + int i, ret; + + pr_debug("%s: Switching FEC PHY power off\n", __func__); + ret = mxs_iomux_setup_multiple_pads(tx28_fec_gpio_pads, + ARRAY_SIZE(tx28_fec_gpio_pads)); + for (i = 0; i < ARRAY_SIZE(tx28_fec_gpio_pads); i++) { + unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]), + PAD_PIN(tx28_fec_gpio_pads[i])); + + ret = gpio_request(gpio, "FEC"); + if (ret) { + pr_err("Failed to request GPIO_%d_%d: %d\n", + PAD_BANK(tx28_fec_gpio_pads[i]), + PAD_PIN(tx28_fec_gpio_pads[i]), ret); + goto free_gpios; + } + ret = gpio_direction_output(gpio, 0); + if (ret) { + pr_err("Failed to set direction of GPIO_%d_%d to output: %d\n", + gpio / 32 + 1, gpio % 32, ret); + goto free_gpios; + } + } + + /* Power up fec phy */ + pr_debug("%s: Switching FEC PHY power on\n", __func__); + ret = gpio_direction_output(TX28_FEC_PHY_POWER, 1); + if (ret) { + pr_err("Failed to power on PHY: %d\n", ret); + goto free_gpios; + } + mdelay(26); /* 25ms according to data sheet */ + + /* nINT */ + gpio_direction_input(MXS_GPIO_NR(4, 5)); + /* Mode strap pins */ + gpio_direction_output(MXS_GPIO_NR(4, 2), 1); + gpio_direction_output(MXS_GPIO_NR(4, 3), 1); + gpio_direction_output(MXS_GPIO_NR(4, 4), 1); + + udelay(100); /* minimum assertion time for nRST */ + + pr_debug("%s: Deasserting FEC PHY RESET\n", __func__); + gpio_set_value(TX28_FEC_PHY_RESET, 1); + + ret = mxs_iomux_setup_multiple_pads(tx28_fec_pads, + ARRAY_SIZE(tx28_fec_pads)); + if (ret) { + pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n", + __func__, ret); + goto free_gpios; + } + pr_debug("%s: Registering FEC device\n", __func__); + mx28_add_fec(0, &tx28_fec_data); + return 0; + +free_gpios: + while (--i >= 0) { + unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]), + PAD_PIN(tx28_fec_gpio_pads[i])); + + gpio_free(gpio); + } + + return ret; +} diff --git a/arch/arm/mach-mxs/module-tx28.h b/arch/arm/mach-mxs/module-tx28.h new file mode 100644 index 00000000000..df9e1b6e81b --- /dev/null +++ b/arch/arm/mach-mxs/module-tx28.h @@ -0,0 +1,9 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +int __init tx28_add_fec0(void); diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c new file mode 100644 index 00000000000..65157a35dbb --- /dev/null +++ b/arch/arm/mach-mxs/ocotp.c @@ -0,0 +1,90 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/mutex.h> + +#include <mach/mxs.h> + +#define OCOTP_WORD_OFFSET 0x20 +#define OCOTP_WORD_COUNT 0x20 + +#define BM_OCOTP_CTRL_BUSY (1 << 8) +#define BM_OCOTP_CTRL_ERROR (1 << 9) +#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12) + +static DEFINE_MUTEX(ocotp_mutex); +static u32 ocotp_words[OCOTP_WORD_COUNT]; + +const u32 *mxs_get_ocotp(void) +{ + void __iomem *ocotp_base = MXS_IO_ADDRESS(MXS_OCOTP_BASE_ADDR); + int timeout = 0x400; + size_t i; + static int once = 0; + + if (once) + return ocotp_words; + + mutex_lock(&ocotp_mutex); + + /* + * clk_enable(hbus_clk) for ocotp can be skipped + * as it must be on when system is running. + */ + + /* try to clear ERROR bit */ + __mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base); + + /* check both BUSY and ERROR cleared */ + while ((__raw_readl(ocotp_base) & + (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout) + cpu_relax(); + + if (unlikely(!timeout)) + goto error_unlock; + + /* open OCOTP banks for read */ + __mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); + + /* approximately wait 32 hclk cycles */ + udelay(1); + + /* poll BUSY bit becoming cleared */ + timeout = 0x400; + while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout) + cpu_relax(); + + if (unlikely(!timeout)) + goto error_unlock; + + for (i = 0; i < OCOTP_WORD_COUNT; i++) + ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET + + i * 0x10); + + /* close banks for power saving */ + __mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); + + once = 1; + + mutex_unlock(&ocotp_mutex); + + return ocotp_words; + +error_unlock: + mutex_unlock(&ocotp_mutex); + pr_err("%s: timeout in reading OCOTP\n", __func__); + return NULL; +} diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c new file mode 100644 index 00000000000..fb042da29bd --- /dev/null +++ b/arch/arm/mach-mxs/pm.c @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/suspend.h> +#include <linux/io.h> +#include <mach/system.h> + +static int mxs_suspend_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_MEM: + arch_idle(); + break; + + default: + return -EINVAL; + } + return 0; +} + +static struct platform_suspend_ops mxs_suspend_ops = { + .enter = mxs_suspend_enter, + .valid = suspend_valid_only_mem, +}; + +static int __init mxs_pm_init(void) +{ + suspend_set_ops(&mxs_suspend_ops); + return 0; +} +device_initcall(mxs_pm_init); diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx23.h b/arch/arm/mach-mxs/regs-clkctrl-mx23.h index dbc04747b69..0ea5c9d0e2b 100644 --- a/arch/arm/mach-mxs/regs-clkctrl-mx23.h +++ b/arch/arm/mach-mxs/regs-clkctrl-mx23.h @@ -33,10 +33,6 @@ #define HW_CLKCTRL_PLLCTRL0_CLR (0x00000008) #define HW_CLKCTRL_PLLCTRL0_TOG (0x0000000c) -#define BP_CLKCTRL_PLLCTRL0_RSRVD6 30 -#define BM_CLKCTRL_PLLCTRL0_RSRVD6 0xC0000000 -#define BF_CLKCTRL_PLLCTRL0_RSRVD6(v) \ - (((v) << 30) & BM_CLKCTRL_PLLCTRL0_RSRVD6) #define BP_CLKCTRL_PLLCTRL0_LFR_SEL 28 #define BM_CLKCTRL_PLLCTRL0_LFR_SEL 0x30000000 #define BF_CLKCTRL_PLLCTRL0_LFR_SEL(v) \ @@ -45,10 +41,6 @@ #define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_2 0x1 #define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_05 0x2 #define BV_CLKCTRL_PLLCTRL0_LFR_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLLCTRL0_RSRVD5 26 -#define BM_CLKCTRL_PLLCTRL0_RSRVD5 0x0C000000 -#define BF_CLKCTRL_PLLCTRL0_RSRVD5(v) \ - (((v) << 26) & BM_CLKCTRL_PLLCTRL0_RSRVD5) #define BP_CLKCTRL_PLLCTRL0_CP_SEL 24 #define BM_CLKCTRL_PLLCTRL0_CP_SEL 0x03000000 #define BF_CLKCTRL_PLLCTRL0_CP_SEL(v) \ @@ -57,10 +49,6 @@ #define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_2 0x1 #define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_05 0x2 #define BV_CLKCTRL_PLLCTRL0_CP_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLLCTRL0_RSRVD4 22 -#define BM_CLKCTRL_PLLCTRL0_RSRVD4 0x00C00000 -#define BF_CLKCTRL_PLLCTRL0_RSRVD4(v) \ - (((v) << 22) & BM_CLKCTRL_PLLCTRL0_RSRVD4) #define BP_CLKCTRL_PLLCTRL0_DIV_SEL 20 #define BM_CLKCTRL_PLLCTRL0_DIV_SEL 0x00300000 #define BF_CLKCTRL_PLLCTRL0_DIV_SEL(v) \ @@ -69,23 +57,13 @@ #define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWER 0x1 #define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWEST 0x2 #define BV_CLKCTRL_PLLCTRL0_DIV_SEL__UNDEFINED 0x3 -#define BM_CLKCTRL_PLLCTRL0_RSRVD3 0x00080000 #define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS 0x00040000 -#define BM_CLKCTRL_PLLCTRL0_RSRVD2 0x00020000 #define BM_CLKCTRL_PLLCTRL0_POWER 0x00010000 -#define BP_CLKCTRL_PLLCTRL0_RSRVD1 0 -#define BM_CLKCTRL_PLLCTRL0_RSRVD1 0x0000FFFF -#define BF_CLKCTRL_PLLCTRL0_RSRVD1(v) \ - (((v) << 0) & BM_CLKCTRL_PLLCTRL0_RSRVD1) #define HW_CLKCTRL_PLLCTRL1 (0x00000010) #define BM_CLKCTRL_PLLCTRL1_LOCK 0x80000000 #define BM_CLKCTRL_PLLCTRL1_FORCE_LOCK 0x40000000 -#define BP_CLKCTRL_PLLCTRL1_RSRVD1 16 -#define BM_CLKCTRL_PLLCTRL1_RSRVD1 0x3FFF0000 -#define BF_CLKCTRL_PLLCTRL1_RSRVD1(v) \ - (((v) << 16) & BM_CLKCTRL_PLLCTRL1_RSRVD1) #define BP_CLKCTRL_PLLCTRL1_LOCK_COUNT 0 #define BM_CLKCTRL_PLLCTRL1_LOCK_COUNT 0x0000FFFF #define BF_CLKCTRL_PLLCTRL1_LOCK_COUNT(v) \ @@ -96,29 +74,15 @@ #define HW_CLKCTRL_CPU_CLR (0x00000028) #define HW_CLKCTRL_CPU_TOG (0x0000002c) -#define BP_CLKCTRL_CPU_RSRVD5 30 -#define BM_CLKCTRL_CPU_RSRVD5 0xC0000000 -#define BF_CLKCTRL_CPU_RSRVD5(v) \ - (((v) << 30) & BM_CLKCTRL_CPU_RSRVD5) #define BM_CLKCTRL_CPU_BUSY_REF_XTAL 0x20000000 #define BM_CLKCTRL_CPU_BUSY_REF_CPU 0x10000000 -#define BM_CLKCTRL_CPU_RSRVD4 0x08000000 #define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN 0x04000000 #define BP_CLKCTRL_CPU_DIV_XTAL 16 #define BM_CLKCTRL_CPU_DIV_XTAL 0x03FF0000 #define BF_CLKCTRL_CPU_DIV_XTAL(v) \ (((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL) -#define BP_CLKCTRL_CPU_RSRVD3 13 -#define BM_CLKCTRL_CPU_RSRVD3 0x0000E000 -#define BF_CLKCTRL_CPU_RSRVD3(v) \ - (((v) << 13) & BM_CLKCTRL_CPU_RSRVD3) #define BM_CLKCTRL_CPU_INTERRUPT_WAIT 0x00001000 -#define BM_CLKCTRL_CPU_RSRVD2 0x00000800 #define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN 0x00000400 -#define BP_CLKCTRL_CPU_RSRVD1 6 -#define BM_CLKCTRL_CPU_RSRVD1 0x000003C0 -#define BF_CLKCTRL_CPU_RSRVD1(v) \ - (((v) << 6) & BM_CLKCTRL_CPU_RSRVD1) #define BP_CLKCTRL_CPU_DIV_CPU 0 #define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F #define BF_CLKCTRL_CPU_DIV_CPU(v) \ @@ -129,10 +93,6 @@ #define HW_CLKCTRL_HBUS_CLR (0x00000038) #define HW_CLKCTRL_HBUS_TOG (0x0000003c) -#define BP_CLKCTRL_HBUS_RSRVD4 30 -#define BM_CLKCTRL_HBUS_RSRVD4 0xC0000000 -#define BF_CLKCTRL_HBUS_RSRVD4(v) \ - (((v) << 30) & BM_CLKCTRL_HBUS_RSRVD4) #define BM_CLKCTRL_HBUS_BUSY 0x20000000 #define BM_CLKCTRL_HBUS_DCP_AS_ENABLE 0x10000000 #define BM_CLKCTRL_HBUS_PXP_AS_ENABLE 0x08000000 @@ -143,7 +103,6 @@ #define BM_CLKCTRL_HBUS_CPU_DATA_AS_ENABLE 0x00400000 #define BM_CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE 0x00200000 #define BM_CLKCTRL_HBUS_AUTO_SLOW_MODE 0x00100000 -#define BM_CLKCTRL_HBUS_RSRVD2 0x00080000 #define BP_CLKCTRL_HBUS_SLOW_DIV 16 #define BM_CLKCTRL_HBUS_SLOW_DIV 0x00070000 #define BF_CLKCTRL_HBUS_SLOW_DIV(v) \ @@ -154,10 +113,6 @@ #define BV_CLKCTRL_HBUS_SLOW_DIV__BY8 0x3 #define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4 #define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5 -#define BP_CLKCTRL_HBUS_RSRVD1 6 -#define BM_CLKCTRL_HBUS_RSRVD1 0x0000FFC0 -#define BF_CLKCTRL_HBUS_RSRVD1(v) \ - (((v) << 6) & BM_CLKCTRL_HBUS_RSRVD1) #define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020 #define BP_CLKCTRL_HBUS_DIV 0 #define BM_CLKCTRL_HBUS_DIV 0x0000001F @@ -167,10 +122,6 @@ #define HW_CLKCTRL_XBUS (0x00000040) #define BM_CLKCTRL_XBUS_BUSY 0x80000000 -#define BP_CLKCTRL_XBUS_RSRVD1 11 -#define BM_CLKCTRL_XBUS_RSRVD1 0x7FFFF800 -#define BF_CLKCTRL_XBUS_RSRVD1(v) \ - (((v) << 11) & BM_CLKCTRL_XBUS_RSRVD1) #define BM_CLKCTRL_XBUS_DIV_FRAC_EN 0x00000400 #define BP_CLKCTRL_XBUS_DIV 0 #define BM_CLKCTRL_XBUS_DIV 0x000003FF @@ -192,10 +143,6 @@ #define BM_CLKCTRL_XTAL_DIGCTRL_CLK1M_GATE 0x08000000 #define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 26 #define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 0x04000000 -#define BP_CLKCTRL_XTAL_RSRVD1 2 -#define BM_CLKCTRL_XTAL_RSRVD1 0x03FFFFFC -#define BF_CLKCTRL_XTAL_RSRVD1(v) \ - (((v) << 2) & BM_CLKCTRL_XTAL_RSRVD1) #define BP_CLKCTRL_XTAL_DIV_UART 0 #define BM_CLKCTRL_XTAL_DIV_UART 0x00000003 #define BF_CLKCTRL_XTAL_DIV_UART(v) \ @@ -205,12 +152,7 @@ #define BP_CLKCTRL_PIX_CLKGATE 31 #define BM_CLKCTRL_PIX_CLKGATE 0x80000000 -#define BM_CLKCTRL_PIX_RSRVD2 0x40000000 #define BM_CLKCTRL_PIX_BUSY 0x20000000 -#define BP_CLKCTRL_PIX_RSRVD1 13 -#define BM_CLKCTRL_PIX_RSRVD1 0x1FFFE000 -#define BF_CLKCTRL_PIX_RSRVD1(v) \ - (((v) << 13) & BM_CLKCTRL_PIX_RSRVD1) #define BM_CLKCTRL_PIX_DIV_FRAC_EN 0x00001000 #define BP_CLKCTRL_PIX_DIV 0 #define BM_CLKCTRL_PIX_DIV 0x00000FFF @@ -221,12 +163,7 @@ #define BP_CLKCTRL_SSP_CLKGATE 31 #define BM_CLKCTRL_SSP_CLKGATE 0x80000000 -#define BM_CLKCTRL_SSP_RSRVD2 0x40000000 #define BM_CLKCTRL_SSP_BUSY 0x20000000 -#define BP_CLKCTRL_SSP_RSRVD1 10 -#define BM_CLKCTRL_SSP_RSRVD1 0x1FFFFC00 -#define BF_CLKCTRL_SSP_RSRVD1(v) \ - (((v) << 10) & BM_CLKCTRL_SSP_RSRVD1) #define BM_CLKCTRL_SSP_DIV_FRAC_EN 0x00000200 #define BP_CLKCTRL_SSP_DIV 0 #define BM_CLKCTRL_SSP_DIV 0x000001FF @@ -237,12 +174,7 @@ #define BP_CLKCTRL_GPMI_CLKGATE 31 #define BM_CLKCTRL_GPMI_CLKGATE 0x80000000 -#define BM_CLKCTRL_GPMI_RSRVD2 0x40000000 #define BM_CLKCTRL_GPMI_BUSY 0x20000000 -#define BP_CLKCTRL_GPMI_RSRVD1 11 -#define BM_CLKCTRL_GPMI_RSRVD1 0x1FFFF800 -#define BF_CLKCTRL_GPMI_RSRVD1(v) \ - (((v) << 11) & BM_CLKCTRL_GPMI_RSRVD1) #define BM_CLKCTRL_GPMI_DIV_FRAC_EN 0x00000400 #define BP_CLKCTRL_GPMI_DIV 0 #define BM_CLKCTRL_GPMI_DIV 0x000003FF @@ -252,10 +184,6 @@ #define HW_CLKCTRL_SPDIF (0x00000090) #define BM_CLKCTRL_SPDIF_CLKGATE 0x80000000 -#define BP_CLKCTRL_SPDIF_RSRVD 0 -#define BM_CLKCTRL_SPDIF_RSRVD 0x7FFFFFFF -#define BF_CLKCTRL_SPDIF_RSRVD(v) \ - (((v) << 0) & BM_CLKCTRL_SPDIF_RSRVD) #define HW_CLKCTRL_EMI (0x000000a0) @@ -266,24 +194,12 @@ #define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000 #define BM_CLKCTRL_EMI_BUSY_REF_CPU 0x08000000 #define BM_CLKCTRL_EMI_BUSY_SYNC_MODE 0x04000000 -#define BP_CLKCTRL_EMI_RSRVD3 18 -#define BM_CLKCTRL_EMI_RSRVD3 0x03FC0000 -#define BF_CLKCTRL_EMI_RSRVD3(v) \ - (((v) << 18) & BM_CLKCTRL_EMI_RSRVD3) #define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000 #define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000 -#define BP_CLKCTRL_EMI_RSRVD2 12 -#define BM_CLKCTRL_EMI_RSRVD2 0x0000F000 -#define BF_CLKCTRL_EMI_RSRVD2(v) \ - (((v) << 12) & BM_CLKCTRL_EMI_RSRVD2) #define BP_CLKCTRL_EMI_DIV_XTAL 8 #define BM_CLKCTRL_EMI_DIV_XTAL 0x00000F00 #define BF_CLKCTRL_EMI_DIV_XTAL(v) \ (((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL) -#define BP_CLKCTRL_EMI_RSRVD1 6 -#define BM_CLKCTRL_EMI_RSRVD1 0x000000C0 -#define BF_CLKCTRL_EMI_RSRVD1(v) \ - (((v) << 6) & BM_CLKCTRL_EMI_RSRVD1) #define BP_CLKCTRL_EMI_DIV_EMI 0 #define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F #define BF_CLKCTRL_EMI_DIV_EMI(v) \ @@ -292,22 +208,13 @@ #define HW_CLKCTRL_IR (0x000000b0) #define BM_CLKCTRL_IR_CLKGATE 0x80000000 -#define BM_CLKCTRL_IR_RSRVD3 0x40000000 #define BM_CLKCTRL_IR_AUTO_DIV 0x20000000 #define BM_CLKCTRL_IR_IR_BUSY 0x10000000 #define BM_CLKCTRL_IR_IROV_BUSY 0x08000000 -#define BP_CLKCTRL_IR_RSRVD2 25 -#define BM_CLKCTRL_IR_RSRVD2 0x06000000 -#define BF_CLKCTRL_IR_RSRVD2(v) \ - (((v) << 25) & BM_CLKCTRL_IR_RSRVD2) #define BP_CLKCTRL_IR_IROV_DIV 16 #define BM_CLKCTRL_IR_IROV_DIV 0x01FF0000 #define BF_CLKCTRL_IR_IROV_DIV(v) \ (((v) << 16) & BM_CLKCTRL_IR_IROV_DIV) -#define BP_CLKCTRL_IR_RSRVD1 10 -#define BM_CLKCTRL_IR_RSRVD1 0x0000FC00 -#define BF_CLKCTRL_IR_RSRVD1(v) \ - (((v) << 10) & BM_CLKCTRL_IR_RSRVD1) #define BP_CLKCTRL_IR_IR_DIV 0 #define BM_CLKCTRL_IR_IR_DIV 0x000003FF #define BF_CLKCTRL_IR_IR_DIV(v) \ @@ -316,12 +223,7 @@ #define HW_CLKCTRL_SAIF (0x000000c0) #define BM_CLKCTRL_SAIF_CLKGATE 0x80000000 -#define BM_CLKCTRL_SAIF_RSRVD2 0x40000000 #define BM_CLKCTRL_SAIF_BUSY 0x20000000 -#define BP_CLKCTRL_SAIF_RSRVD1 17 -#define BM_CLKCTRL_SAIF_RSRVD1 0x1FFE0000 -#define BF_CLKCTRL_SAIF_RSRVD1(v) \ - (((v) << 17) & BM_CLKCTRL_SAIF_RSRVD1) #define BM_CLKCTRL_SAIF_DIV_FRAC_EN 0x00010000 #define BP_CLKCTRL_SAIF_DIV 0 #define BM_CLKCTRL_SAIF_DIV 0x0000FFFF @@ -332,20 +234,11 @@ #define BM_CLKCTRL_TV_CLK_TV108M_GATE 0x80000000 #define BM_CLKCTRL_TV_CLK_TV_GATE 0x40000000 -#define BP_CLKCTRL_TV_RSRVD 0 -#define BM_CLKCTRL_TV_RSRVD 0x3FFFFFFF -#define BF_CLKCTRL_TV_RSRVD(v) \ - (((v) << 0) & BM_CLKCTRL_TV_RSRVD) #define HW_CLKCTRL_ETM (0x000000e0) #define BM_CLKCTRL_ETM_CLKGATE 0x80000000 -#define BM_CLKCTRL_ETM_RSRVD2 0x40000000 #define BM_CLKCTRL_ETM_BUSY 0x20000000 -#define BP_CLKCTRL_ETM_RSRVD1 7 -#define BM_CLKCTRL_ETM_RSRVD1 0x1FFFFF80 -#define BF_CLKCTRL_ETM_RSRVD1(v) \ - (((v) << 7) & BM_CLKCTRL_ETM_RSRVD1) #define BM_CLKCTRL_ETM_DIV_FRAC_EN 0x00000040 #define BP_CLKCTRL_ETM_DIV 0 #define BM_CLKCTRL_ETM_DIV 0x0000003F @@ -393,36 +286,23 @@ #define BM_CLKCTRL_FRAC1_CLKGATEVID 0x80000000 #define BM_CLKCTRL_FRAC1_VID_STABLE 0x40000000 -#define BP_CLKCTRL_FRAC1_RSRVD1 0 -#define BM_CLKCTRL_FRAC1_RSRVD1 0x3FFFFFFF -#define BF_CLKCTRL_FRAC1_RSRVD1(v) \ - (((v) << 0) & BM_CLKCTRL_FRAC1_RSRVD1) #define HW_CLKCTRL_CLKSEQ (0x00000110) #define HW_CLKCTRL_CLKSEQ_SET (0x00000114) #define HW_CLKCTRL_CLKSEQ_CLR (0x00000118) #define HW_CLKCTRL_CLKSEQ_TOG (0x0000011c) -#define BP_CLKCTRL_CLKSEQ_RSRVD1 9 -#define BM_CLKCTRL_CLKSEQ_RSRVD1 0xFFFFFE00 -#define BF_CLKCTRL_CLKSEQ_RSRVD1(v) \ - (((v) << 9) & BM_CLKCTRL_CLKSEQ_RSRVD1) #define BM_CLKCTRL_CLKSEQ_BYPASS_ETM 0x00000100 #define BM_CLKCTRL_CLKSEQ_BYPASS_CPU 0x00000080 #define BM_CLKCTRL_CLKSEQ_BYPASS_EMI 0x00000040 #define BM_CLKCTRL_CLKSEQ_BYPASS_SSP 0x00000020 #define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI 0x00000010 #define BM_CLKCTRL_CLKSEQ_BYPASS_IR 0x00000008 -#define BM_CLKCTRL_CLKSEQ_RSRVD0 0x00000004 #define BM_CLKCTRL_CLKSEQ_BYPASS_PIX 0x00000002 #define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF 0x00000001 #define HW_CLKCTRL_RESET (0x00000120) -#define BP_CLKCTRL_RESET_RSRVD 2 -#define BM_CLKCTRL_RESET_RSRVD 0xFFFFFFFC -#define BF_CLKCTRL_RESET_RSRVD(v) \ - (((v) << 2) & BM_CLKCTRL_RESET_RSRVD) #define BM_CLKCTRL_RESET_CHIP 0x00000002 #define BM_CLKCTRL_RESET_DIG 0x00000001 @@ -432,10 +312,6 @@ #define BM_CLKCTRL_STATUS_CPU_LIMIT 0xC0000000 #define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \ (((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT) -#define BP_CLKCTRL_STATUS_RSRVD 0 -#define BM_CLKCTRL_STATUS_RSRVD 0x3FFFFFFF -#define BF_CLKCTRL_STATUS_RSRVD(v) \ - (((v) << 0) & BM_CLKCTRL_STATUS_RSRVD) #define HW_CLKCTRL_VERSION (0x00000140) diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx28.h b/arch/arm/mach-mxs/regs-clkctrl-mx28.h index 661df18755f..7d1b061d794 100644 --- a/arch/arm/mach-mxs/regs-clkctrl-mx28.h +++ b/arch/arm/mach-mxs/regs-clkctrl-mx28.h @@ -31,10 +31,6 @@ #define HW_CLKCTRL_PLL0CTRL0_CLR (0x00000008) #define HW_CLKCTRL_PLL0CTRL0_TOG (0x0000000c) -#define BP_CLKCTRL_PLL0CTRL0_RSRVD6 30 -#define BM_CLKCTRL_PLL0CTRL0_RSRVD6 0xC0000000 -#define BF_CLKCTRL_PLL0CTRL0_RSRVD6(v) \ - (((v) << 30) & BM_CLKCTRL_PLL0CTRL0_RSRVD6) #define BP_CLKCTRL_PLL0CTRL0_LFR_SEL 28 #define BM_CLKCTRL_PLL0CTRL0_LFR_SEL 0x30000000 #define BF_CLKCTRL_PLL0CTRL0_LFR_SEL(v) \ @@ -43,10 +39,6 @@ #define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_2 0x1 #define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_05 0x2 #define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLL0CTRL0_RSRVD5 26 -#define BM_CLKCTRL_PLL0CTRL0_RSRVD5 0x0C000000 -#define BF_CLKCTRL_PLL0CTRL0_RSRVD5(v) \ - (((v) << 26) & BM_CLKCTRL_PLL0CTRL0_RSRVD5) #define BP_CLKCTRL_PLL0CTRL0_CP_SEL 24 #define BM_CLKCTRL_PLL0CTRL0_CP_SEL 0x03000000 #define BF_CLKCTRL_PLL0CTRL0_CP_SEL(v) \ @@ -55,10 +47,6 @@ #define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_2 0x1 #define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_05 0x2 #define BV_CLKCTRL_PLL0CTRL0_CP_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLL0CTRL0_RSRVD4 22 -#define BM_CLKCTRL_PLL0CTRL0_RSRVD4 0x00C00000 -#define BF_CLKCTRL_PLL0CTRL0_RSRVD4(v) \ - (((v) << 22) & BM_CLKCTRL_PLL0CTRL0_RSRVD4) #define BP_CLKCTRL_PLL0CTRL0_DIV_SEL 20 #define BM_CLKCTRL_PLL0CTRL0_DIV_SEL 0x00300000 #define BF_CLKCTRL_PLL0CTRL0_DIV_SEL(v) \ @@ -67,22 +55,13 @@ #define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWER 0x1 #define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWEST 0x2 #define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__UNDEFINED 0x3 -#define BM_CLKCTRL_PLL0CTRL0_RSRVD3 0x00080000 #define BM_CLKCTRL_PLL0CTRL0_EN_USB_CLKS 0x00040000 #define BM_CLKCTRL_PLL0CTRL0_POWER 0x00020000 -#define BP_CLKCTRL_PLL0CTRL0_RSRVD1 0 -#define BM_CLKCTRL_PLL0CTRL0_RSRVD1 0x0001FFFF -#define BF_CLKCTRL_PLL0CTRL0_RSRVD1(v) \ - (((v) << 0) & BM_CLKCTRL_PLL0CTRL0_RSRVD1) #define HW_CLKCTRL_PLL0CTRL1 (0x00000010) #define BM_CLKCTRL_PLL0CTRL1_LOCK 0x80000000 #define BM_CLKCTRL_PLL0CTRL1_FORCE_LOCK 0x40000000 -#define BP_CLKCTRL_PLL0CTRL1_RSRVD1 16 -#define BM_CLKCTRL_PLL0CTRL1_RSRVD1 0x3FFF0000 -#define BF_CLKCTRL_PLL0CTRL1_RSRVD1(v) \ - (((v) << 16) & BM_CLKCTRL_PLL0CTRL1_RSRVD1) #define BP_CLKCTRL_PLL0CTRL1_LOCK_COUNT 0 #define BM_CLKCTRL_PLL0CTRL1_LOCK_COUNT 0x0000FFFF #define BF_CLKCTRL_PLL0CTRL1_LOCK_COUNT(v) \ @@ -94,7 +73,6 @@ #define HW_CLKCTRL_PLL1CTRL0_TOG (0x0000002c) #define BM_CLKCTRL_PLL1CTRL0_CLKGATEEMI 0x80000000 -#define BM_CLKCTRL_PLL1CTRL0_RSRVD6 0x40000000 #define BP_CLKCTRL_PLL1CTRL0_LFR_SEL 28 #define BM_CLKCTRL_PLL1CTRL0_LFR_SEL 0x30000000 #define BF_CLKCTRL_PLL1CTRL0_LFR_SEL(v) \ @@ -103,10 +81,6 @@ #define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_2 0x1 #define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_05 0x2 #define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLL1CTRL0_RSRVD5 26 -#define BM_CLKCTRL_PLL1CTRL0_RSRVD5 0x0C000000 -#define BF_CLKCTRL_PLL1CTRL0_RSRVD5(v) \ - (((v) << 26) & BM_CLKCTRL_PLL1CTRL0_RSRVD5) #define BP_CLKCTRL_PLL1CTRL0_CP_SEL 24 #define BM_CLKCTRL_PLL1CTRL0_CP_SEL 0x03000000 #define BF_CLKCTRL_PLL1CTRL0_CP_SEL(v) \ @@ -115,10 +89,6 @@ #define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_2 0x1 #define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_05 0x2 #define BV_CLKCTRL_PLL1CTRL0_CP_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLL1CTRL0_RSRVD4 22 -#define BM_CLKCTRL_PLL1CTRL0_RSRVD4 0x00C00000 -#define BF_CLKCTRL_PLL1CTRL0_RSRVD4(v) \ - (((v) << 22) & BM_CLKCTRL_PLL1CTRL0_RSRVD4) #define BP_CLKCTRL_PLL1CTRL0_DIV_SEL 20 #define BM_CLKCTRL_PLL1CTRL0_DIV_SEL 0x00300000 #define BF_CLKCTRL_PLL1CTRL0_DIV_SEL(v) \ @@ -127,22 +97,13 @@ #define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWER 0x1 #define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWEST 0x2 #define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__UNDEFINED 0x3 -#define BM_CLKCTRL_PLL1CTRL0_RSRVD3 0x00080000 #define BM_CLKCTRL_PLL1CTRL0_EN_USB_CLKS 0x00040000 #define BM_CLKCTRL_PLL1CTRL0_POWER 0x00020000 -#define BP_CLKCTRL_PLL1CTRL0_RSRVD1 0 -#define BM_CLKCTRL_PLL1CTRL0_RSRVD1 0x0001FFFF -#define BF_CLKCTRL_PLL1CTRL0_RSRVD1(v) \ - (((v) << 0) & BM_CLKCTRL_PLL1CTRL0_RSRVD1) #define HW_CLKCTRL_PLL1CTRL1 (0x00000030) #define BM_CLKCTRL_PLL1CTRL1_LOCK 0x80000000 #define BM_CLKCTRL_PLL1CTRL1_FORCE_LOCK 0x40000000 -#define BP_CLKCTRL_PLL1CTRL1_RSRVD1 16 -#define BM_CLKCTRL_PLL1CTRL1_RSRVD1 0x3FFF0000 -#define BF_CLKCTRL_PLL1CTRL1_RSRVD1(v) \ - (((v) << 16) & BM_CLKCTRL_PLL1CTRL1_RSRVD1) #define BP_CLKCTRL_PLL1CTRL1_LOCK_COUNT 0 #define BM_CLKCTRL_PLL1CTRL1_LOCK_COUNT 0x0000FFFF #define BF_CLKCTRL_PLL1CTRL1_LOCK_COUNT(v) \ @@ -154,51 +115,31 @@ #define HW_CLKCTRL_PLL2CTRL0_TOG (0x0000004c) #define BM_CLKCTRL_PLL2CTRL0_CLKGATE 0x80000000 -#define BM_CLKCTRL_PLL2CTRL0_RSRVD3 0x40000000 #define BP_CLKCTRL_PLL2CTRL0_LFR_SEL 28 #define BM_CLKCTRL_PLL2CTRL0_LFR_SEL 0x30000000 #define BF_CLKCTRL_PLL2CTRL0_LFR_SEL(v) \ (((v) << 28) & BM_CLKCTRL_PLL2CTRL0_LFR_SEL) -#define BM_CLKCTRL_PLL2CTRL0_RSRVD2 0x08000000 #define BM_CLKCTRL_PLL2CTRL0_HOLD_RING_OFF_B 0x04000000 #define BP_CLKCTRL_PLL2CTRL0_CP_SEL 24 #define BM_CLKCTRL_PLL2CTRL0_CP_SEL 0x03000000 #define BF_CLKCTRL_PLL2CTRL0_CP_SEL(v) \ (((v) << 24) & BM_CLKCTRL_PLL2CTRL0_CP_SEL) #define BM_CLKCTRL_PLL2CTRL0_POWER 0x00800000 -#define BP_CLKCTRL_PLL2CTRL0_RSRVD1 0 -#define BM_CLKCTRL_PLL2CTRL0_RSRVD1 0x007FFFFF -#define BF_CLKCTRL_PLL2CTRL0_RSRVD1(v) \ - (((v) << 0) & BM_CLKCTRL_PLL2CTRL0_RSRVD1) #define HW_CLKCTRL_CPU (0x00000050) #define HW_CLKCTRL_CPU_SET (0x00000054) #define HW_CLKCTRL_CPU_CLR (0x00000058) #define HW_CLKCTRL_CPU_TOG (0x0000005c) -#define BP_CLKCTRL_CPU_RSRVD5 30 -#define BM_CLKCTRL_CPU_RSRVD5 0xC0000000 -#define BF_CLKCTRL_CPU_RSRVD5(v) \ - (((v) << 30) & BM_CLKCTRL_CPU_RSRVD5) #define BM_CLKCTRL_CPU_BUSY_REF_XTAL 0x20000000 #define BM_CLKCTRL_CPU_BUSY_REF_CPU 0x10000000 -#define BM_CLKCTRL_CPU_RSRVD4 0x08000000 #define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN 0x04000000 #define BP_CLKCTRL_CPU_DIV_XTAL 16 #define BM_CLKCTRL_CPU_DIV_XTAL 0x03FF0000 #define BF_CLKCTRL_CPU_DIV_XTAL(v) \ (((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL) -#define BP_CLKCTRL_CPU_RSRVD3 13 -#define BM_CLKCTRL_CPU_RSRVD3 0x0000E000 -#define BF_CLKCTRL_CPU_RSRVD3(v) \ - (((v) << 13) & BM_CLKCTRL_CPU_RSRVD3) #define BM_CLKCTRL_CPU_INTERRUPT_WAIT 0x00001000 -#define BM_CLKCTRL_CPU_RSRVD2 0x00000800 #define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN 0x00000400 -#define BP_CLKCTRL_CPU_RSRVD1 6 -#define BM_CLKCTRL_CPU_RSRVD1 0x000003C0 -#define BF_CLKCTRL_CPU_RSRVD1(v) \ - (((v) << 6) & BM_CLKCTRL_CPU_RSRVD1) #define BP_CLKCTRL_CPU_DIV_CPU 0 #define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F #define BF_CLKCTRL_CPU_DIV_CPU(v) \ @@ -212,7 +153,6 @@ #define BM_CLKCTRL_HBUS_ASM_BUSY 0x80000000 #define BM_CLKCTRL_HBUS_DCP_AS_ENABLE 0x40000000 #define BM_CLKCTRL_HBUS_PXP_AS_ENABLE 0x20000000 -#define BM_CLKCTRL_HBUS_RSRVD2 0x10000000 #define BM_CLKCTRL_HBUS_ASM_EMIPORT_AS_ENABLE 0x08000000 #define BM_CLKCTRL_HBUS_APBHDMA_AS_ENABLE 0x04000000 #define BM_CLKCTRL_HBUS_APBXDMA_AS_ENABLE 0x02000000 @@ -232,10 +172,6 @@ #define BV_CLKCTRL_HBUS_SLOW_DIV__BY8 0x3 #define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4 #define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5 -#define BP_CLKCTRL_HBUS_RSRVD1 6 -#define BM_CLKCTRL_HBUS_RSRVD1 0x0000FFC0 -#define BF_CLKCTRL_HBUS_RSRVD1(v) \ - (((v) << 6) & BM_CLKCTRL_HBUS_RSRVD1) #define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020 #define BP_CLKCTRL_HBUS_DIV 0 #define BM_CLKCTRL_HBUS_DIV 0x0000001F @@ -245,10 +181,6 @@ #define HW_CLKCTRL_XBUS (0x00000070) #define BM_CLKCTRL_XBUS_BUSY 0x80000000 -#define BP_CLKCTRL_XBUS_RSRVD1 12 -#define BM_CLKCTRL_XBUS_RSRVD1 0x7FFFF000 -#define BF_CLKCTRL_XBUS_RSRVD1(v) \ - (((v) << 12) & BM_CLKCTRL_XBUS_RSRVD1) #define BM_CLKCTRL_XBUS_AUTO_CLEAR_DIV_ENABLE 0x00000800 #define BM_CLKCTRL_XBUS_DIV_FRAC_EN 0x00000400 #define BP_CLKCTRL_XBUS_DIV 0 @@ -263,19 +195,10 @@ #define BP_CLKCTRL_XTAL_UART_CLK_GATE 31 #define BM_CLKCTRL_XTAL_UART_CLK_GATE 0x80000000 -#define BM_CLKCTRL_XTAL_RSRVD3 0x40000000 #define BP_CLKCTRL_XTAL_PWM_CLK24M_GATE 29 #define BM_CLKCTRL_XTAL_PWM_CLK24M_GATE 0x20000000 -#define BP_CLKCTRL_XTAL_RSRVD2 27 -#define BM_CLKCTRL_XTAL_RSRVD2 0x18000000 -#define BF_CLKCTRL_XTAL_RSRVD2(v) \ - (((v) << 27) & BM_CLKCTRL_XTAL_RSRVD2) #define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 26 #define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 0x04000000 -#define BP_CLKCTRL_XTAL_RSRVD1 2 -#define BM_CLKCTRL_XTAL_RSRVD1 0x03FFFFFC -#define BF_CLKCTRL_XTAL_RSRVD1(v) \ - (((v) << 2) & BM_CLKCTRL_XTAL_RSRVD1) #define BP_CLKCTRL_XTAL_DIV_UART 0 #define BM_CLKCTRL_XTAL_DIV_UART 0x00000003 #define BF_CLKCTRL_XTAL_DIV_UART(v) \ @@ -285,12 +208,7 @@ #define BP_CLKCTRL_SSP0_CLKGATE 31 #define BM_CLKCTRL_SSP0_CLKGATE 0x80000000 -#define BM_CLKCTRL_SSP0_RSRVD2 0x40000000 #define BM_CLKCTRL_SSP0_BUSY 0x20000000 -#define BP_CLKCTRL_SSP0_RSRVD1 10 -#define BM_CLKCTRL_SSP0_RSRVD1 0x1FFFFC00 -#define BF_CLKCTRL_SSP0_RSRVD1(v) \ - (((v) << 10) & BM_CLKCTRL_SSP0_RSRVD1) #define BM_CLKCTRL_SSP0_DIV_FRAC_EN 0x00000200 #define BP_CLKCTRL_SSP0_DIV 0 #define BM_CLKCTRL_SSP0_DIV 0x000001FF @@ -301,12 +219,7 @@ #define BP_CLKCTRL_SSP1_CLKGATE 31 #define BM_CLKCTRL_SSP1_CLKGATE 0x80000000 -#define BM_CLKCTRL_SSP1_RSRVD2 0x40000000 #define BM_CLKCTRL_SSP1_BUSY 0x20000000 -#define BP_CLKCTRL_SSP1_RSRVD1 10 -#define BM_CLKCTRL_SSP1_RSRVD1 0x1FFFFC00 -#define BF_CLKCTRL_SSP1_RSRVD1(v) \ - (((v) << 10) & BM_CLKCTRL_SSP1_RSRVD1) #define BM_CLKCTRL_SSP1_DIV_FRAC_EN 0x00000200 #define BP_CLKCTRL_SSP1_DIV 0 #define BM_CLKCTRL_SSP1_DIV 0x000001FF @@ -317,12 +230,7 @@ #define BP_CLKCTRL_SSP2_CLKGATE 31 #define BM_CLKCTRL_SSP2_CLKGATE 0x80000000 -#define BM_CLKCTRL_SSP2_RSRVD2 0x40000000 #define BM_CLKCTRL_SSP2_BUSY 0x20000000 -#define BP_CLKCTRL_SSP2_RSRVD1 10 -#define BM_CLKCTRL_SSP2_RSRVD1 0x1FFFFC00 -#define BF_CLKCTRL_SSP2_RSRVD1(v) \ - (((v) << 10) & BM_CLKCTRL_SSP2_RSRVD1) #define BM_CLKCTRL_SSP2_DIV_FRAC_EN 0x00000200 #define BP_CLKCTRL_SSP2_DIV 0 #define BM_CLKCTRL_SSP2_DIV 0x000001FF @@ -333,12 +241,7 @@ #define BP_CLKCTRL_SSP3_CLKGATE 31 #define BM_CLKCTRL_SSP3_CLKGATE 0x80000000 -#define BM_CLKCTRL_SSP3_RSRVD2 0x40000000 #define BM_CLKCTRL_SSP3_BUSY 0x20000000 -#define BP_CLKCTRL_SSP3_RSRVD1 10 -#define BM_CLKCTRL_SSP3_RSRVD1 0x1FFFFC00 -#define BF_CLKCTRL_SSP3_RSRVD1(v) \ - (((v) << 10) & BM_CLKCTRL_SSP3_RSRVD1) #define BM_CLKCTRL_SSP3_DIV_FRAC_EN 0x00000200 #define BP_CLKCTRL_SSP3_DIV 0 #define BM_CLKCTRL_SSP3_DIV 0x000001FF @@ -349,12 +252,7 @@ #define BP_CLKCTRL_GPMI_CLKGATE 31 #define BM_CLKCTRL_GPMI_CLKGATE 0x80000000 -#define BM_CLKCTRL_GPMI_RSRVD2 0x40000000 #define BM_CLKCTRL_GPMI_BUSY 0x20000000 -#define BP_CLKCTRL_GPMI_RSRVD1 11 -#define BM_CLKCTRL_GPMI_RSRVD1 0x1FFFF800 -#define BF_CLKCTRL_GPMI_RSRVD1(v) \ - (((v) << 11) & BM_CLKCTRL_GPMI_RSRVD1) #define BM_CLKCTRL_GPMI_DIV_FRAC_EN 0x00000400 #define BP_CLKCTRL_GPMI_DIV 0 #define BM_CLKCTRL_GPMI_DIV 0x000003FF @@ -365,10 +263,6 @@ #define BP_CLKCTRL_SPDIF_CLKGATE 31 #define BM_CLKCTRL_SPDIF_CLKGATE 0x80000000 -#define BP_CLKCTRL_SPDIF_RSRVD 0 -#define BM_CLKCTRL_SPDIF_RSRVD 0x7FFFFFFF -#define BF_CLKCTRL_SPDIF_RSRVD(v) \ - (((v) << 0) & BM_CLKCTRL_SPDIF_RSRVD) #define HW_CLKCTRL_EMI (0x000000f0) @@ -379,24 +273,12 @@ #define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000 #define BM_CLKCTRL_EMI_BUSY_REF_CPU 0x08000000 #define BM_CLKCTRL_EMI_BUSY_SYNC_MODE 0x04000000 -#define BP_CLKCTRL_EMI_RSRVD3 18 -#define BM_CLKCTRL_EMI_RSRVD3 0x03FC0000 -#define BF_CLKCTRL_EMI_RSRVD3(v) \ - (((v) << 18) & BM_CLKCTRL_EMI_RSRVD3) #define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000 #define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000 -#define BP_CLKCTRL_EMI_RSRVD2 12 -#define BM_CLKCTRL_EMI_RSRVD2 0x0000F000 -#define BF_CLKCTRL_EMI_RSRVD2(v) \ - (((v) << 12) & BM_CLKCTRL_EMI_RSRVD2) #define BP_CLKCTRL_EMI_DIV_XTAL 8 #define BM_CLKCTRL_EMI_DIV_XTAL 0x00000F00 #define BF_CLKCTRL_EMI_DIV_XTAL(v) \ (((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL) -#define BP_CLKCTRL_EMI_RSRVD1 6 -#define BM_CLKCTRL_EMI_RSRVD1 0x000000C0 -#define BF_CLKCTRL_EMI_RSRVD1(v) \ - (((v) << 6) & BM_CLKCTRL_EMI_RSRVD1) #define BP_CLKCTRL_EMI_DIV_EMI 0 #define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F #define BF_CLKCTRL_EMI_DIV_EMI(v) \ @@ -406,12 +288,7 @@ #define BP_CLKCTRL_SAIF0_CLKGATE 31 #define BM_CLKCTRL_SAIF0_CLKGATE 0x80000000 -#define BM_CLKCTRL_SAIF0_RSRVD2 0x40000000 #define BM_CLKCTRL_SAIF0_BUSY 0x20000000 -#define BP_CLKCTRL_SAIF0_RSRVD1 17 -#define BM_CLKCTRL_SAIF0_RSRVD1 0x1FFE0000 -#define BF_CLKCTRL_SAIF0_RSRVD1(v) \ - (((v) << 17) & BM_CLKCTRL_SAIF0_RSRVD1) #define BM_CLKCTRL_SAIF0_DIV_FRAC_EN 0x00010000 #define BP_CLKCTRL_SAIF0_DIV 0 #define BM_CLKCTRL_SAIF0_DIV 0x0000FFFF @@ -422,12 +299,7 @@ #define BP_CLKCTRL_SAIF1_CLKGATE 31 #define BM_CLKCTRL_SAIF1_CLKGATE 0x80000000 -#define BM_CLKCTRL_SAIF1_RSRVD2 0x40000000 #define BM_CLKCTRL_SAIF1_BUSY 0x20000000 -#define BP_CLKCTRL_SAIF1_RSRVD1 17 -#define BM_CLKCTRL_SAIF1_RSRVD1 0x1FFE0000 -#define BF_CLKCTRL_SAIF1_RSRVD1(v) \ - (((v) << 17) & BM_CLKCTRL_SAIF1_RSRVD1) #define BM_CLKCTRL_SAIF1_DIV_FRAC_EN 0x00010000 #define BP_CLKCTRL_SAIF1_DIV 0 #define BM_CLKCTRL_SAIF1_DIV 0x0000FFFF @@ -438,12 +310,7 @@ #define BP_CLKCTRL_DIS_LCDIF_CLKGATE 31 #define BM_CLKCTRL_DIS_LCDIF_CLKGATE 0x80000000 -#define BM_CLKCTRL_DIS_LCDIF_RSRVD2 0x40000000 #define BM_CLKCTRL_DIS_LCDIF_BUSY 0x20000000 -#define BP_CLKCTRL_DIS_LCDIF_RSRVD1 14 -#define BM_CLKCTRL_DIS_LCDIF_RSRVD1 0x1FFFC000 -#define BF_CLKCTRL_DIS_LCDIF_RSRVD1(v) \ - (((v) << 14) & BM_CLKCTRL_DIS_LCDIF_RSRVD1) #define BM_CLKCTRL_DIS_LCDIF_DIV_FRAC_EN 0x00002000 #define BP_CLKCTRL_DIS_LCDIF_DIV 0 #define BM_CLKCTRL_DIS_LCDIF_DIV 0x00001FFF @@ -453,12 +320,7 @@ #define HW_CLKCTRL_ETM (0x00000130) #define BM_CLKCTRL_ETM_CLKGATE 0x80000000 -#define BM_CLKCTRL_ETM_RSRVD2 0x40000000 #define BM_CLKCTRL_ETM_BUSY 0x20000000 -#define BP_CLKCTRL_ETM_RSRVD1 8 -#define BM_CLKCTRL_ETM_RSRVD1 0x1FFFFF00 -#define BF_CLKCTRL_ETM_RSRVD1(v) \ - (((v) << 8) & BM_CLKCTRL_ETM_RSRVD1) #define BM_CLKCTRL_ETM_DIV_FRAC_EN 0x00000080 #define BP_CLKCTRL_ETM_DIV 0 #define BM_CLKCTRL_ETM_DIV 0x0000007F @@ -471,7 +333,6 @@ #define BP_CLKCTRL_ENET_DISABLE 30 #define BM_CLKCTRL_ENET_DISABLE 0x40000000 #define BM_CLKCTRL_ENET_STATUS 0x20000000 -#define BM_CLKCTRL_ENET_RSRVD1 0x10000000 #define BM_CLKCTRL_ENET_BUSY_TIME 0x08000000 #define BP_CLKCTRL_ENET_DIV_TIME 21 #define BM_CLKCTRL_ENET_DIV_TIME 0x07E00000 @@ -493,37 +354,23 @@ #define BM_CLKCTRL_ENET_CLK_OUT_EN 0x00040000 #define BM_CLKCTRL_ENET_RESET_BY_SW_CHIP 0x00020000 #define BM_CLKCTRL_ENET_RESET_BY_SW 0x00010000 -#define BP_CLKCTRL_ENET_RSRVD0 0 -#define BM_CLKCTRL_ENET_RSRVD0 0x0000FFFF -#define BF_CLKCTRL_ENET_RSRVD0(v) \ - (((v) << 0) & BM_CLKCTRL_ENET_RSRVD0) #define HW_CLKCTRL_HSADC (0x00000150) -#define BM_CLKCTRL_HSADC_RSRVD2 0x80000000 #define BM_CLKCTRL_HSADC_RESETB 0x40000000 #define BP_CLKCTRL_HSADC_FREQDIV 28 #define BM_CLKCTRL_HSADC_FREQDIV 0x30000000 #define BF_CLKCTRL_HSADC_FREQDIV(v) \ (((v) << 28) & BM_CLKCTRL_HSADC_FREQDIV) -#define BP_CLKCTRL_HSADC_RSRVD1 0 -#define BM_CLKCTRL_HSADC_RSRVD1 0x0FFFFFFF -#define BF_CLKCTRL_HSADC_RSRVD1(v) \ - (((v) << 0) & BM_CLKCTRL_HSADC_RSRVD1) #define HW_CLKCTRL_FLEXCAN (0x00000160) -#define BM_CLKCTRL_FLEXCAN_RSRVD2 0x80000000 #define BP_CLKCTRL_FLEXCAN_STOP_CAN0 30 #define BM_CLKCTRL_FLEXCAN_STOP_CAN0 0x40000000 #define BM_CLKCTRL_FLEXCAN_CAN0_STATUS 0x20000000 #define BP_CLKCTRL_FLEXCAN_STOP_CAN1 28 #define BM_CLKCTRL_FLEXCAN_STOP_CAN1 0x10000000 #define BM_CLKCTRL_FLEXCAN_CAN1_STATUS 0x08000000 -#define BP_CLKCTRL_FLEXCAN_RSRVD1 0 -#define BM_CLKCTRL_FLEXCAN_RSRVD1 0x07FFFFFF -#define BF_CLKCTRL_FLEXCAN_RSRVD1(v) \ - (((v) << 0) & BM_CLKCTRL_FLEXCAN_RSRVD1) #define HW_CLKCTRL_FRAC0 (0x000001b0) #define HW_CLKCTRL_FRAC0_SET (0x000001b4) @@ -564,10 +411,6 @@ #define HW_CLKCTRL_FRAC1_CLR (0x000001c8) #define HW_CLKCTRL_FRAC1_TOG (0x000001cc) -#define BP_CLKCTRL_FRAC1_RSRVD2 24 -#define BM_CLKCTRL_FRAC1_RSRVD2 0xFF000000 -#define BF_CLKCTRL_FRAC1_RSRVD2(v) \ - (((v) << 24) & BM_CLKCTRL_FRAC1_RSRVD2) #define BP_CLKCTRL_FRAC1_CLKGATEGPMI 23 #define BM_CLKCTRL_FRAC1_CLKGATEGPMI 0x00800000 #define BM_CLKCTRL_FRAC1_GPMI_STABLE 0x00400000 @@ -595,22 +438,10 @@ #define HW_CLKCTRL_CLKSEQ_CLR (0x000001d8) #define HW_CLKCTRL_CLKSEQ_TOG (0x000001dc) -#define BP_CLKCTRL_CLKSEQ_RSRVD0 19 -#define BM_CLKCTRL_CLKSEQ_RSRVD0 0xFFF80000 -#define BF_CLKCTRL_CLKSEQ_RSRVD0(v) \ - (((v) << 19) & BM_CLKCTRL_CLKSEQ_RSRVD0) #define BM_CLKCTRL_CLKSEQ_BYPASS_CPU 0x00040000 -#define BP_CLKCTRL_CLKSEQ_RSRVD1 15 -#define BM_CLKCTRL_CLKSEQ_RSRVD1 0x00038000 -#define BF_CLKCTRL_CLKSEQ_RSRVD1(v) \ - (((v) << 15) & BM_CLKCTRL_CLKSEQ_RSRVD1) #define BM_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF 0x00004000 #define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__BYPASS 0x1 #define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__PFD 0x0 -#define BP_CLKCTRL_CLKSEQ_RSRVD2 9 -#define BM_CLKCTRL_CLKSEQ_RSRVD2 0x00003E00 -#define BF_CLKCTRL_CLKSEQ_RSRVD2(v) \ - (((v) << 9) & BM_CLKCTRL_CLKSEQ_RSRVD2) #define BM_CLKCTRL_CLKSEQ_BYPASS_ETM 0x00000100 #define BM_CLKCTRL_CLKSEQ_BYPASS_EMI 0x00000080 #define BM_CLKCTRL_CLKSEQ_BYPASS_SSP3 0x00000040 @@ -623,10 +454,6 @@ #define HW_CLKCTRL_RESET (0x000001e0) -#define BP_CLKCTRL_RESET_RSRVD 6 -#define BM_CLKCTRL_RESET_RSRVD 0xFFFFFFC0 -#define BF_CLKCTRL_RESET_RSRVD(v) \ - (((v) << 6) & BM_CLKCTRL_RESET_RSRVD) #define BM_CLKCTRL_RESET_WDOG_POR_DISABLE 0x00000020 #define BM_CLKCTRL_RESET_EXTERNAL_RESET_ENABLE 0x00000010 #define BM_CLKCTRL_RESET_THERMAL_RESET_ENABLE 0x00000008 @@ -640,10 +467,6 @@ #define BM_CLKCTRL_STATUS_CPU_LIMIT 0xC0000000 #define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \ (((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT) -#define BP_CLKCTRL_STATUS_RSRVD 0 -#define BM_CLKCTRL_STATUS_RSRVD 0x3FFFFFFF -#define BF_CLKCTRL_STATUS_RSRVD(v) \ - (((v) << 0) & BM_CLKCTRL_STATUS_RSRVD) #define HW_CLKCTRL_VERSION (0x00000200) diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c index 9343d7edd4f..20ec3bddf7c 100644 --- a/arch/arm/mach-mxs/system.c +++ b/arch/arm/mach-mxs/system.c @@ -22,6 +22,7 @@ #include <linux/err.h> #include <linux/delay.h> #include <linux/init.h> +#include <linux/module.h> #include <asm/proc-fns.h> #include <asm/system.h> @@ -135,3 +136,4 @@ error: pr_err("%s(%p): module reset timeout\n", __func__, reset_addr); return -ETIMEDOUT; } +EXPORT_SYMBOL(mxs_reset_block); diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 8dc2c76d226..986c3bf4e6b 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -26,6 +26,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> +#include <mach/bridge-regs.h> #include <mach/hardware.h> #include <mach/orion5x.h> #include <plat/ehci-orion.h> @@ -599,6 +600,11 @@ void __init orion5x_wdt_init(void) /***************************************************************************** * Time handling ****************************************************************************/ +void __init orion5x_init_early(void) +{ + orion_time_set_base(TIMER_VIRT_BASE); +} + int orion5x_tclk; int __init orion5x_find_tclk(void) @@ -616,7 +622,9 @@ int __init orion5x_find_tclk(void) static void orion5x_timer_init(void) { orion5x_tclk = orion5x_find_tclk(); - orion_time_init(IRQ_ORION5X_BRIDGE, orion5x_tclk); + + orion_time_init(ORION5X_BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, + IRQ_ORION5X_BRIDGE, orion5x_tclk); } struct sys_timer orion5x_timer = { diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 8f004503c96..f2b2b35e864 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -9,6 +9,7 @@ struct mv_sata_platform_data; * Basic Orion init functions used early by machine-setup. */ void orion5x_map_io(void); +void orion5x_init_early(void); void orion5x_init_irq(void); void orion5x_init(void); extern int orion5x_tclk; diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c index b1c451f5ee2..42580757930 100644 --- a/arch/arm/mach-orion5x/d2net-setup.c +++ b/arch/arm/mach-orion5x/d2net-setup.c @@ -339,6 +339,7 @@ MACHINE_START(D2NET, "LaCie d2 Network") .boot_params = 0x00000100, .init_machine = d2net_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, @@ -350,6 +351,7 @@ MACHINE_START(BIGDISK, "LaCie Big Disk Network") .boot_params = 0x00000100, .init_machine = d2net_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index df1083f5b6e..c10a1171537 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -361,6 +361,7 @@ MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board") .boot_params = 0x00000100, .init_machine = db88f5281_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, MACHINE_END diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 3a7bc0e3698..90ab022eabe 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -733,6 +733,7 @@ MACHINE_START(DNS323, "D-Link DNS-323") .boot_params = 0x00000100, .init_machine = dns323_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c index ba98459f44b..d037a90c216 100644 --- a/arch/arm/mach-orion5x/edmini_v2-setup.c +++ b/arch/arm/mach-orion5x/edmini_v2-setup.c @@ -254,6 +254,7 @@ MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2") .boot_params = 0x00000100, .init_machine = edmini_v2_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h index 5c9744cd8ef..96484bcd34c 100644 --- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h +++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h @@ -22,14 +22,12 @@ #define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c) +#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x110) + #define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE | 0x11C) -#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x110) #define WDT_INT_REQ 0x0008 -#define BRIDGE_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 #define BRIDGE_INT_TIMER1_CLR (~0x0004) #define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x200) diff --git a/arch/arm/mach-orion5x/include/mach/gpio.h b/arch/arm/mach-orion5x/include/mach/gpio.h index d8182e87ac1..a1d0b78decb 100644 --- a/arch/arm/mach-orion5x/include/mach/gpio.h +++ b/arch/arm/mach-orion5x/include/mach/gpio.h @@ -6,32 +6,4 @@ * warranty of any kind, whether express or implied. */ -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -#include <mach/irqs.h> #include <plat/gpio.h> -#include <asm-generic/gpio.h> /* cansleep wrappers */ - -#define GPIO_MAX 32 -#define GPIO_OUT(pin) ORION5X_DEV_BUS_REG(0x100) -#define GPIO_IO_CONF(pin) ORION5X_DEV_BUS_REG(0x104) -#define GPIO_BLINK_EN(pin) ORION5X_DEV_BUS_REG(0x108) -#define GPIO_IN_POL(pin) ORION5X_DEV_BUS_REG(0x10c) -#define GPIO_DATA_IN(pin) ORION5X_DEV_BUS_REG(0x110) -#define GPIO_EDGE_CAUSE(pin) ORION5X_DEV_BUS_REG(0x114) -#define GPIO_EDGE_MASK(pin) ORION5X_DEV_BUS_REG(0x118) -#define GPIO_LEVEL_MASK(pin) ORION5X_DEV_BUS_REG(0x11c) - -static inline int gpio_to_irq(int pin) -{ - return pin + IRQ_ORION5X_GPIO_START; -} - -static inline int irq_to_gpio(int irq) -{ - return irq - IRQ_ORION5X_GPIO_START; -} - - -#endif diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index 2d876657053..0a28bbc7689 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -73,6 +73,7 @@ #define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000) #define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000) #define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE | (x)) +#define GPIO_VIRT_BASE ORION5X_DEV_BUS_REG(0x0100) #define SPI_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x0600) #define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x1000) #define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2000) diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index d7512b925a8..ed85891f869 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -28,27 +28,12 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) void __init orion5x_init_irq(void) { - int i; - orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK); /* - * Mask and clear GPIO IRQ interrupts - */ - writel(0x0, GPIO_LEVEL_MASK(0)); - writel(0x0, GPIO_EDGE_MASK(0)); - writel(0x0, GPIO_EDGE_CAUSE(0)); - - /* - * Register chained level handlers for GPIO IRQs by default. - * User can use set_type() if he wants to use edge types handlers. + * Initialize gpiolib for GPIOs 0-31. */ - for (i = IRQ_ORION5X_GPIO_START; i < NR_IRQS; i++) { - set_irq_chip(i, &orion_gpio_irq_chip); - set_irq_handler(i, handle_level_irq); - irq_desc[i].status |= IRQ_LEVEL; - set_irq_flags(i, IRQF_VALID); - } + orion_gpio_init(0, 32, GPIO_VIRT_BASE, 0, IRQ_ORION5X_GPIO_START); set_irq_chained_handler(IRQ_ORION5X_GPIO_0_7, gpio_irq_handler); set_irq_chained_handler(IRQ_ORION5X_GPIO_8_15, gpio_irq_handler); set_irq_chained_handler(IRQ_ORION5X_GPIO_16_23, gpio_irq_handler); diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index 4be9aa08de6..47497c76162 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -382,6 +382,7 @@ MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") .boot_params = 0x00000100, .init_machine = kurobox_pro_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, @@ -394,6 +395,7 @@ MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live") .boot_params = 0x00000100, .init_machine = kurobox_pro_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c index 20a9b66cbaf..6ae12aa6d75 100644 --- a/arch/arm/mach-orion5x/ls-chl-setup.c +++ b/arch/arm/mach-orion5x/ls-chl-setup.c @@ -321,6 +321,7 @@ MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)") .boot_params = 0x00000100, .init_machine = lschl_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c index 437364b7168..7adafd79cf9 100644 --- a/arch/arm/mach-orion5x/ls_hgl-setup.c +++ b/arch/arm/mach-orion5x/ls_hgl-setup.c @@ -268,6 +268,7 @@ MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL") .boot_params = 0x00000100, .init_machine = ls_hgl_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c index ab9b0cf0a90..869958f5c39 100644 --- a/arch/arm/mach-orion5x/lsmini-setup.c +++ b/arch/arm/mach-orion5x/lsmini-setup.c @@ -270,6 +270,7 @@ MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini") .boot_params = 0x00000100, .init_machine = lsmini_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c index db485d3b814..2288207726e 100644 --- a/arch/arm/mach-orion5x/mpp.c +++ b/arch/arm/mach-orion5x/mpp.c @@ -124,9 +124,6 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode) u32 mpp_8_15_ctrl = readl(MPP_8_15_CTRL); u32 mpp_16_19_ctrl = readl(MPP_16_19_CTRL); - /* Initialize gpiolib. */ - orion_gpio_init(); - for ( ; mode->mpp >= 0; mode++) { u32 *reg; int num_type; diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c index 2f0e16cd7e8..b43b208153c 100644 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ b/arch/arm/mach-orion5x/mss2-setup.c @@ -264,6 +264,7 @@ MACHINE_START(MSS2, "Maxtor Shared Storage II") .boot_params = 0x00000100, .init_machine = mss2_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32 diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c index b3d90f25de9..c55d071707f 100644 --- a/arch/arm/mach-orion5x/mv2120-setup.c +++ b/arch/arm/mach-orion5x/mv2120-setup.c @@ -232,6 +232,7 @@ MACHINE_START(MV2120, "HP Media Vault mv2120") .boot_params = 0x00000100, .init_machine = mv2120_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32 diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c index d6665b31665..429ecafe9fd 100644 --- a/arch/arm/mach-orion5x/net2big-setup.c +++ b/arch/arm/mach-orion5x/net2big-setup.c @@ -422,6 +422,7 @@ MACHINE_START(NET2BIG, "LaCie 2Big Network") .boot_params = 0x00000100, .init_machine = net2big_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c index f4c26fd731f..34310ab56e2 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -172,6 +172,7 @@ MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design") .boot_params = 0x00000100, .init_machine = rd88f5181l_fxo_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c index b5942909bab..c1f79fa014e 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -184,6 +184,7 @@ MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design") .boot_params = 0x00000100, .init_machine = rd88f5181l_ge_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index 165ed87029b..67ec6959b26 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -308,6 +308,7 @@ MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design") .boot_params = 0x00000100, .init_machine = rd88f5182_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, MACHINE_END diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c index 02ff45f3e2e..b080c6966d1 100644 --- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c @@ -126,6 +126,7 @@ MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design") .boot_params = 0x00000100, .init_machine = rd88f6183ap_ge_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c index 4403fae5ab0..5653ee6c71d 100644 --- a/arch/arm/mach-orion5x/terastation_pro2-setup.c +++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c @@ -361,6 +361,7 @@ MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live") .boot_params = 0x00000100, .init_machine = tsp2_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index 1e196129d76..8bbd27ea673 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -325,6 +325,7 @@ MACHINE_START(TS209, "QNAP TS-109/TS-209") .boot_params = 0x00000100, .init_machine = qnap_ts209_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index 428af2046e3..92f393f08fa 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -314,6 +314,7 @@ MACHINE_START(TS409, "QNAP TS-409") .boot_params = 0x00000100, .init_machine = qnap_ts409_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h index 37b3d487529..151e89e1e67 100644 --- a/arch/arm/mach-orion5x/ts78xx-fpga.h +++ b/arch/arm/mach-orion5x/ts78xx-fpga.h @@ -1,3 +1,4 @@ +#define TS7800_FPGA_MAGIC 0x00b480 #define FPGAID(_magic, _rev) ((_magic << 8) + _rev) /* @@ -6,11 +7,15 @@ */ enum fpga_ids { /* Technologic Systems */ - TS7800_REV_1 = FPGAID(0x00b480, 0x01), - TS7800_REV_2 = FPGAID(0x00b480, 0x02), - TS7800_REV_3 = FPGAID(0x00b480, 0x03), - TS7800_REV_4 = FPGAID(0x00b480, 0x04), - TS7800_REV_5 = FPGAID(0x00b480, 0x05), + TS7800_REV_1 = FPGAID(TS7800_FPGA_MAGIC, 0x01), + TS7800_REV_2 = FPGAID(TS7800_FPGA_MAGIC, 0x02), + TS7800_REV_3 = FPGAID(TS7800_FPGA_MAGIC, 0x03), + TS7800_REV_4 = FPGAID(TS7800_FPGA_MAGIC, 0x04), + TS7800_REV_5 = FPGAID(TS7800_FPGA_MAGIC, 0x05), + TS7800_REV_6 = FPGAID(TS7800_FPGA_MAGIC, 0x06), + TS7800_REV_7 = FPGAID(TS7800_FPGA_MAGIC, 0x07), + TS7800_REV_8 = FPGAID(TS7800_FPGA_MAGIC, 0x08), + TS7800_REV_9 = FPGAID(TS7800_FPGA_MAGIC, 0x09), /* Unaffordable & Expensive */ UAE_DUMMY = FPGAID(0xffffff, 0x01), diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index c1c1cd04bdd..8554707d20a 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -191,6 +191,60 @@ static int ts78xx_ts_nand_dev_ready(struct mtd_info *mtd) return readb(TS_NAND_CTRL) & 0x20; } +static void ts78xx_ts_nand_write_buf(struct mtd_info *mtd, + const uint8_t *buf, int len) +{ + struct nand_chip *chip = mtd->priv; + void __iomem *io_base = chip->IO_ADDR_W; + unsigned long off = ((unsigned long)buf & 3); + int sz; + + if (off) { + sz = min_t(int, 4 - off, len); + writesb(io_base, buf, sz); + buf += sz; + len -= sz; + } + + sz = len >> 2; + if (sz) { + u32 *buf32 = (u32 *)buf; + writesl(io_base, buf32, sz); + buf += sz << 2; + len -= sz << 2; + } + + if (len) + writesb(io_base, buf, len); +} + +static void ts78xx_ts_nand_read_buf(struct mtd_info *mtd, + uint8_t *buf, int len) +{ + struct nand_chip *chip = mtd->priv; + void __iomem *io_base = chip->IO_ADDR_R; + unsigned long off = ((unsigned long)buf & 3); + int sz; + + if (off) { + sz = min_t(int, 4 - off, len); + readsb(io_base, buf, sz); + buf += sz; + len -= sz; + } + + sz = len >> 2; + if (sz) { + u32 *buf32 = (u32 *)buf; + readsl(io_base, buf32, sz); + buf += sz << 2; + len -= sz << 2; + } + + if (len) + readsb(io_base, buf, len); +} + const char *ts_nand_part_probes[] = { "cmdlinepart", NULL }; static struct mtd_partition ts78xx_ts_nand_parts[] = { @@ -233,6 +287,8 @@ static struct platform_nand_data ts78xx_ts_nand_data = { */ .cmd_ctrl = ts78xx_ts_nand_cmd_ctrl, .dev_ready = ts78xx_ts_nand_dev_ready, + .write_buf = ts78xx_ts_nand_write_buf, + .read_buf = ts78xx_ts_nand_read_buf, }, }; @@ -334,14 +390,29 @@ static void ts78xx_fpga_supports(void) case TS7800_REV_3: case TS7800_REV_4: case TS7800_REV_5: + case TS7800_REV_6: + case TS7800_REV_7: + case TS7800_REV_8: + case TS7800_REV_9: ts78xx_fpga.supports.ts_rtc.present = 1; ts78xx_fpga.supports.ts_nand.present = 1; ts78xx_fpga.supports.ts_rng.present = 1; break; default: - ts78xx_fpga.supports.ts_rtc.present = 0; - ts78xx_fpga.supports.ts_nand.present = 0; - ts78xx_fpga.supports.ts_rng.present = 0; + /* enable devices if magic matches */ + switch ((ts78xx_fpga.id >> 8) & 0xffffff) { + case TS7800_FPGA_MAGIC: + printk(KERN_WARNING "TS-7800 FPGA: unrecognized revision 0x%.2x\n", + ts78xx_fpga.id & 0xff); + ts78xx_fpga.supports.ts_rtc.present = 1; + ts78xx_fpga.supports.ts_nand.present = 1; + ts78xx_fpga.supports.ts_rng.present = 1; + break; + default: + ts78xx_fpga.supports.ts_rtc.present = 0; + ts78xx_fpga.supports.ts_nand.present = 0; + ts78xx_fpga.supports.ts_rng.present = 0; + } } } @@ -553,6 +624,7 @@ MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC") .boot_params = 0x00000100, .init_machine = ts78xx_init, .map_io = ts78xx_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, MACHINE_END diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index 7994d6ec08a..4e5216be074 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -175,6 +175,7 @@ MACHINE_START(WNR854T, "Netgear WNR854T") .boot_params = 0x00000100, .init_machine = wnr854t_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index a5989b7eb53..fab79d09cc5 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -263,6 +263,7 @@ MACHINE_START(WRT350N_V2, "Linksys WRT350N v2") .boot_params = 0x00000100, .init_machine = wrt350n_v2_init, .map_io = orion5x_map_io, + .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 37405d9abe3..0db2411ef4b 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -58,6 +58,9 @@ #include <linux/mfd/pcf50633/pmic.h> #include <linux/mfd/pcf50633/backlight.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> + #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -86,6 +89,8 @@ #include <plat/udc.h> #include <plat/gpio-cfg.h> #include <plat/iic.h> +#include <plat/ts.h> + static struct pcf50633 *gta02_pcf; @@ -280,9 +285,6 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .valid_modes_mask = REGULATOR_MODE_NORMAL, .always_on = 1, .apply_uV = 1, - .state_mem = { - .enabled = 1, - }, }, }, [PCF50633_REGULATOR_DOWN1] = { @@ -301,9 +303,6 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .valid_modes_mask = REGULATOR_MODE_NORMAL, .apply_uV = 1, .always_on = 1, - .state_mem = { - .enabled = 1, - }, }, }, [PCF50633_REGULATOR_HCLDO] = { @@ -311,8 +310,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .min_uV = 2000000, .max_uV = 3300000, .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, }, }, [PCF50633_REGULATOR_LDO1] = { @@ -320,10 +319,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .min_uV = 3300000, .max_uV = 3300000, .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, .apply_uV = 1, - .state_mem = { - .enabled = 0, - }, }, }, [PCF50633_REGULATOR_LDO2] = { @@ -347,6 +344,7 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .min_uV = 3200000, .max_uV = 3200000, .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, .apply_uV = 1, }, }, @@ -355,10 +353,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .min_uV = 3000000, .max_uV = 3000000, .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, .apply_uV = 1, - .state_mem = { - .enabled = 1, - }, }, }, [PCF50633_REGULATOR_LDO6] = { @@ -373,9 +369,6 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .min_uV = 1800000, .max_uV = 1800000, .valid_modes_mask = REGULATOR_MODE_NORMAL, - .state_mem = { - .enabled = 1, - }, }, }, @@ -471,6 +464,43 @@ static struct s3c2410_hcd_info gta02_usb_info __initdata = { }, }; +/* Touchscreen */ +static struct s3c2410_ts_mach_info gta02_ts_info = { + .delay = 10000, + .presc = 0xff, /* slow as we can go */ + .oversampling_shift = 2, +}; + +/* Buttons */ +static struct gpio_keys_button gta02_buttons[] = { + { + .gpio = GTA02_GPIO_AUX_KEY, + .code = KEY_PHONE, + .desc = "Aux", + .type = EV_KEY, + .debounce_interval = 100, + }, + { + .gpio = GTA02_GPIO_HOLD_KEY, + .code = KEY_PAUSE, + .desc = "Hold", + .type = EV_KEY, + .debounce_interval = 100, + }, +}; + +static struct gpio_keys_platform_data gta02_buttons_pdata = { + .buttons = gta02_buttons, + .nbuttons = ARRAY_SIZE(gta02_buttons), +}; + +static struct platform_device gta02_buttons_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = >a02_buttons_pdata, + }, +}; static void __init gta02_map_io(void) { @@ -491,7 +521,11 @@ static struct platform_device *gta02_devices[] __initdata = { >a02_nor_flash, &s3c24xx_pwm_device, &s3c_device_iis, + &samsung_asoc_dma, &s3c_device_i2c0, + >a02_buttons_device, + &s3c_device_adc, + &s3c_device_ts, }; /* These guys DO need to be children of PMU. */ @@ -541,6 +575,7 @@ static void __init gta02_machine_init(void) #endif s3c24xx_udc_set_platdata(>a02_udc_cfg); + s3c24xx_ts_set_platdata(>a02_ts_info); s3c_ohci_set_platdata(>a02_usb_info); s3c_nand_set_platdata(>a02_nand_info); s3c_i2c0_set_platdata(NULL); @@ -549,6 +584,8 @@ static void __init gta02_machine_init(void) platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices)); pm_power_off = gta02_poweroff; + + regulator_has_full_constraints(); } diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 579d2f0f4dd..e4177e22557 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -143,6 +143,7 @@ config MACH_SMDK6410 select S3C_DEV_USB_HSOTG select S3C_DEV_WDT select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_PWM select HAVE_S3C2410_WATCHDOG if WATCHDOG select S3C64XX_SETUP_SDHCI select S3C64XX_SETUP_I2C1 @@ -231,7 +232,7 @@ config MACH_HMT select S3C_DEV_NAND select S3C_DEV_USB_HOST select S3C64XX_SETUP_FB_24BPP - select HAVE_PWM + select SAMSUNG_DEV_PWM help Machine support for the Airgoo HMT @@ -249,8 +250,8 @@ config MACH_SMARTQ select S3C64XX_SETUP_SDHCI select S3C64XX_SETUP_FB_24BPP select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS - select HAVE_PWM help Shared machine support for SmartQ 5/7 diff --git a/arch/arm/mach-s3c64xx/cpufreq.c b/arch/arm/mach-s3c64xx/cpufreq.c index 74c0e8347de..4375b97588b 100644 --- a/arch/arm/mach-s3c64xx/cpufreq.c +++ b/arch/arm/mach-s3c64xx/cpufreq.c @@ -181,7 +181,7 @@ static void __init s3c64xx_cpufreq_config_regulator(void) } #endif -static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) +static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) { int ret; struct cpufreq_frequency_table *freq; diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index a80a3163dd3..686a4f270b1 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -29,6 +29,7 @@ #include <linux/smsc911x.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> +#include <linux/pwm_backlight.h> #ifdef CONFIG_SMDK6410_WM1190_EV1 #include <linux/mfd/wm8350/core.h> @@ -49,6 +50,7 @@ #include <mach/hardware.h> #include <mach/regs-fb.h> #include <mach/map.h> +#include <mach/gpio-bank-f.h> #include <asm/irq.h> #include <asm/mach-types.h> @@ -119,7 +121,6 @@ static void smdk6410_lcd_power_set(struct plat_lcd_data *pd, { if (power) { gpio_direction_output(S3C64XX_GPF(13), 1); - gpio_direction_output(S3C64XX_GPF(15), 1); /* fire nRESET on power up */ gpio_direction_output(S3C64XX_GPN(5), 0); @@ -127,7 +128,6 @@ static void smdk6410_lcd_power_set(struct plat_lcd_data *pd, gpio_direction_output(S3C64XX_GPN(5), 1); msleep(1); } else { - gpio_direction_output(S3C64XX_GPF(15), 0); gpio_direction_output(S3C64XX_GPF(13), 0); } } @@ -270,6 +270,45 @@ static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = { .cols = 8, }; +static int smdk6410_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(S3C64XX_GPF(15), "Backlight"); + if (ret) { + printk(KERN_ERR "failed to request GPF for PWM-OUT1\n"); + return ret; + } + + /* Configure GPIO pin with S3C64XX_GPF15_PWM_TOUT1 */ + s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2)); + + return 0; +} + +static void smdk6410_backlight_exit(struct device *dev) +{ + s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_OUTPUT); + gpio_free(S3C64XX_GPF(15)); +} + +static struct platform_pwm_backlight_data smdk6410_backlight_data = { + .pwm_id = 1, + .max_brightness = 255, + .dft_brightness = 255, + .pwm_period_ns = 78770, + .init = smdk6410_backlight_init, + .exit = smdk6410_backlight_exit, +}; + +static struct platform_device smdk6410_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &s3c_device_timer[1].dev, + .platform_data = &smdk6410_backlight_data, + }, +}; + static struct map_desc smdk6410_iodesc[] = {}; static struct platform_device *smdk6410_devices[] __initdata = { @@ -299,6 +338,8 @@ static struct platform_device *smdk6410_devices[] __initdata = { &s3c_device_rtc, &s3c_device_ts, &s3c_device_wdt, + &s3c_device_timer[1], + &smdk6410_backlight_device, }; #ifdef CONFIG_REGULATOR @@ -694,7 +735,6 @@ static void __init smdk6410_machine_init(void) gpio_request(S3C64XX_GPN(5), "LCD power"); gpio_request(S3C64XX_GPF(13), "LCD power"); - gpio_request(S3C64XX_GPF(15), "LCD power"); i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig index 164d2783d38..017af4c4293 100644 --- a/arch/arm/mach-s5p64x0/Kconfig +++ b/arch/arm/mach-s5p64x0/Kconfig @@ -10,12 +10,14 @@ if ARCH_S5P64X0 config CPU_S5P6440 bool select S3C_PL330_DMA + select S5P_HRT help Enable S5P6440 CPU support config CPU_S5P6450 bool select S3C_PL330_DMA + select S5P_HRT help Enable S5P6450 CPU support @@ -34,6 +36,7 @@ config MACH_SMDK6440 select S3C_DEV_WDT select S3C64XX_DEV_SPI select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS select S5P64X0_SETUP_I2C1 help @@ -47,6 +50,7 @@ config MACH_SMDK6450 select S3C_DEV_WDT select S3C64XX_DEV_SPI select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS select S5P64X0_SETUP_I2C1 help diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index e5beb84e239..2d559f10fd4 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -22,6 +22,7 @@ #include <linux/module.h> #include <linux/clk.h> #include <linux/gpio.h> +#include <linux/pwm_backlight.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -32,6 +33,7 @@ #include <mach/map.h> #include <mach/regs-clock.h> #include <mach/i2c.h> +#include <mach/regs-gpio.h> #include <plat/regs-serial.h> #include <plat/gpio-cfg.h> @@ -43,6 +45,7 @@ #include <plat/pll.h> #include <plat/adc.h> #include <plat/ts.h> +#include <plat/s5p-time.h> #define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -88,6 +91,45 @@ static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { }, }; +static int smdk6440_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(S5P6440_GPF(15), "Backlight"); + if (ret) { + printk(KERN_ERR "failed to request GPF for PWM-OUT1\n"); + return ret; + } + + /* Configure GPIO pin with S5P6440_GPF15_PWM_TOUT1 */ + s3c_gpio_cfgpin(S5P6440_GPF(15), S3C_GPIO_SFN(2)); + + return 0; +} + +static void smdk6440_backlight_exit(struct device *dev) +{ + s3c_gpio_cfgpin(S5P6440_GPF(15), S3C_GPIO_OUTPUT); + gpio_free(S5P6440_GPF(15)); +} + +static struct platform_pwm_backlight_data smdk6440_backlight_data = { + .pwm_id = 1, + .max_brightness = 255, + .dft_brightness = 255, + .pwm_period_ns = 78770, + .init = smdk6440_backlight_init, + .exit = smdk6440_backlight_exit, +}; + +static struct platform_device smdk6440_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &s3c_device_timer[1].dev, + .platform_data = &smdk6440_backlight_data, + }, +}; + static struct platform_device *smdk6440_devices[] __initdata = { &s3c_device_adc, &s3c_device_rtc, @@ -97,6 +139,8 @@ static struct platform_device *smdk6440_devices[] __initdata = { &s3c_device_wdt, &samsung_asoc_dma, &s5p6440_device_iis, + &s3c_device_timer[1], + &smdk6440_backlight_device, }; static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = { @@ -136,6 +180,7 @@ static void __init smdk6440_map_io(void) s5p_init_io(NULL, 0, S5P64X0_SYS_ID); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs)); + s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } static void __init smdk6440_machine_init(void) @@ -159,5 +204,5 @@ MACHINE_START(SMDK6440, "SMDK6440") .init_irq = s5p6440_init_irq, .map_io = smdk6440_map_io, .init_machine = smdk6440_machine_init, - .timer = &s3c24xx_timer, + .timer = &s5p_timer, MACHINE_END diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c index 3a20de0a926..d19c4690ee9 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -22,6 +22,7 @@ #include <linux/module.h> #include <linux/clk.h> #include <linux/gpio.h> +#include <linux/pwm_backlight.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -32,6 +33,7 @@ #include <mach/map.h> #include <mach/regs-clock.h> #include <mach/i2c.h> +#include <mach/regs-gpio.h> #include <plat/regs-serial.h> #include <plat/gpio-cfg.h> @@ -43,6 +45,7 @@ #include <plat/pll.h> #include <plat/adc.h> #include <plat/ts.h> +#include <plat/s5p-time.h> #define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -106,6 +109,45 @@ static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = { #endif }; +static int smdk6450_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(S5P6450_GPF(15), "Backlight"); + if (ret) { + printk(KERN_ERR "failed to request GPF for PWM-OUT1\n"); + return ret; + } + + /* Configure GPIO pin with S5P6450_GPF15_PWM_TOUT1 */ + s3c_gpio_cfgpin(S5P6450_GPF(15), S3C_GPIO_SFN(2)); + + return 0; +} + +static void smdk6450_backlight_exit(struct device *dev) +{ + s3c_gpio_cfgpin(S5P6450_GPF(15), S3C_GPIO_OUTPUT); + gpio_free(S5P6450_GPF(15)); +} + +static struct platform_pwm_backlight_data smdk6450_backlight_data = { + .pwm_id = 1, + .max_brightness = 255, + .dft_brightness = 255, + .pwm_period_ns = 78770, + .init = smdk6450_backlight_init, + .exit = smdk6450_backlight_exit, +}; + +static struct platform_device smdk6450_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &s3c_device_timer[1].dev, + .platform_data = &smdk6450_backlight_data, + }, +}; + static struct platform_device *smdk6450_devices[] __initdata = { &s3c_device_adc, &s3c_device_rtc, @@ -115,6 +157,8 @@ static struct platform_device *smdk6450_devices[] __initdata = { &s3c_device_wdt, &samsung_asoc_dma, &s5p6450_device_iis0, + &s3c_device_timer[1], + &smdk6450_backlight_device, /* s5p6450_device_spi0 will be added */ }; @@ -155,6 +199,7 @@ static void __init smdk6450_map_io(void) s5p_init_io(NULL, 0, S5P64X0_SYS_ID); s3c24xx_init_clocks(19200000); s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs)); + s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } static void __init smdk6450_machine_init(void) @@ -178,5 +223,5 @@ MACHINE_START(SMDK6450, "SMDK6450") .init_irq = s5p6450_init_irq, .map_io = smdk6450_map_io, .init_machine = smdk6450_machine_init, - .timer = &s3c24xx_timer, + .timer = &s5p_timer, MACHINE_END diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index b8fbf2fcba6..608722ff4f2 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -58,6 +58,7 @@ config MACH_SMDKC100 select SAMSUNG_DEV_ADC select SAMSUNG_DEV_IDE select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS select S5PC100_SETUP_FB_24BPP select S5PC100_SETUP_I2C1 diff --git a/arch/arm/mach-s5pc100/gpiolib.c b/arch/arm/mach-s5pc100/gpiolib.c index 20856eb7dd5..2842394b28b 100644 --- a/arch/arm/mach-s5pc100/gpiolib.c +++ b/arch/arm/mach-s5pc100/gpiolib.c @@ -348,6 +348,7 @@ static __init int s5pc100_gpiolib_init(void) } samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, nr_chips); + s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); return 0; } diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index dd192a27524..0525cb3ef40 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -23,12 +23,15 @@ #include <linux/fb.h> #include <linux/delay.h> #include <linux/input.h> +#include <linux/pwm_backlight.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/map.h> #include <mach/regs-fb.h> +#include <mach/regs-gpio.h> + #include <video/platform_lcd.h> #include <asm/irq.h> @@ -107,9 +110,6 @@ static struct i2c_board_info i2c_devs1[] __initdata = { static void smdkc100_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) { - /* backlight */ - gpio_direction_output(S5PC100_GPD(0), power); - if (power) { /* module reset */ gpio_direction_output(S5PC100_GPH0(6), 1); @@ -179,6 +179,45 @@ static struct samsung_keypad_platdata smdkc100_keypad_data __initdata = { .cols = 8, }; +static int smdkc100_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(S5PC100_GPD(0), "Backlight"); + if (ret) { + printk(KERN_ERR "failed to request GPF for PWM-OUT0\n"); + return ret; + } + + /* Configure GPIO pin with S5PC100_GPD_TOUT_0 */ + s3c_gpio_cfgpin(S5PC100_GPD(0), S3C_GPIO_SFN(2)); + + return 0; +} + +static void smdkc100_backlight_exit(struct device *dev) +{ + s3c_gpio_cfgpin(S5PC100_GPD(0), S3C_GPIO_OUTPUT); + gpio_free(S5PC100_GPD(0)); +} + +static struct platform_pwm_backlight_data smdkc100_backlight_data = { + .pwm_id = 0, + .max_brightness = 255, + .dft_brightness = 255, + .pwm_period_ns = 78770, + .init = smdkc100_backlight_init, + .exit = smdkc100_backlight_exit, +}; + +static struct platform_device smdkc100_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &s3c_device_timer[0].dev, + .platform_data = &smdkc100_backlight_data, + }, +}; + static struct platform_device *smdkc100_devices[] __initdata = { &s3c_device_adc, &s3c_device_cfcon, @@ -200,6 +239,8 @@ static struct platform_device *smdkc100_devices[] __initdata = { &s5p_device_fimc1, &s5p_device_fimc2, &s5pc100_device_spdif, + &s3c_device_timer[0], + &smdkc100_backlight_device, }; static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { @@ -233,7 +274,6 @@ static void __init smdkc100_machine_init(void) s5pc100_spdif_setup_gpio(S5PC100_SPDIF_GPD); /* LCD init */ - gpio_request(S5PC100_GPD(0), "GPD"); gpio_request(S5PC100_GPH0(6), "GPH0"); smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0); platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices)); diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 53aabef1e9c..37b5a97594a 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -13,6 +13,7 @@ config CPU_S5PV210 bool select S3C_PL330_DMA select S5P_EXT_INT + select S5P_HRT select S5PV210_PM if PM help Enable S5PV210 CPU support @@ -53,6 +54,11 @@ config S5PV210_SETUP_SDHCI_GPIO help Common setup code for SDHCI gpio. +config S5PV210_SETUP_FIMC + bool + help + Common setup code for the camera interfaces. + menu "S5PC110 Machines" config MACH_AQUILA @@ -130,6 +136,7 @@ config MACH_SMDKV210 select SAMSUNG_DEV_ADC select SAMSUNG_DEV_IDE select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS select S5PV210_SETUP_FB_24BPP select S5PV210_SETUP_I2C1 diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index ff1a0db57a2..11f17907b4e 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -31,6 +31,7 @@ obj-y += dev-audio.o obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o obj-$(CONFIG_S5PV210_SETUP_FB_24BPP) += setup-fb-24bpp.o +obj-$(CONFIG_S5PV210_SETUP_FIMC) += setup-fimc.o obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o obj-$(CONFIG_S5PV210_SETUP_IDE) += setup-ide.o diff --git a/arch/arm/mach-s5pv210/gpiolib.c b/arch/arm/mach-s5pv210/gpiolib.c index ab673effd76..1ba20a703e0 100644 --- a/arch/arm/mach-s5pv210/gpiolib.c +++ b/arch/arm/mach-s5pv210/gpiolib.c @@ -281,6 +281,7 @@ static __init int s5pv210_gpiolib_init(void) } samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips); + s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); return 0; } diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h index 4c45b74def5..78925c51634 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h @@ -146,6 +146,10 @@ #define S5P_OM_STAT S5P_CLKREG(0xE100) #define S5P_USB_PHY_CONTROL S5P_CLKREG(0xE80C) #define S5P_DAC_CONTROL S5P_CLKREG(0xE810) +#define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814) +#define S5P_MIPI_DPHY_ENABLE (1 << 0) +#define S5P_MIPI_DPHY_SRESETN (1 << 1) +#define S5P_MIPI_DPHY_MRESETN (1 << 2) #define S5P_INFORM0 S5P_CLKREG(0xF000) #define S5P_INFORM1 S5P_CLKREG(0xF004) @@ -161,7 +165,6 @@ #define S5P_MDNIE_SEL S5P_CLKREG(0x7008) #define S5P_MIPI_PHY_CON0 S5P_CLKREG(0x7200) #define S5P_MIPI_PHY_CON1 S5P_CLKREG(0x7204) -#define S5P_MIPI_DPHY_CONTROL S5P_CLKREG(0xE814) #define S5P_IDLE_CFG_TL_MASK (3 << 30) #define S5P_IDLE_CFG_TM_MASK (3 << 28) diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 557add4fc56..4e1d8ff5ae5 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -39,6 +39,7 @@ #include <plat/fb.h> #include <plat/fimc-core.h> #include <plat/sdhci.h> +#include <plat/s5p-time.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -296,13 +297,11 @@ static struct regulator_init_data aquila_ldo17_data = { }; /* BUCK */ -static struct regulator_consumer_supply buck1_consumer[] = { - { .supply = "vddarm", }, -}; +static struct regulator_consumer_supply buck1_consumer = + REGULATOR_SUPPLY("vddarm", NULL); -static struct regulator_consumer_supply buck2_consumer[] = { - { .supply = "vddint", }, -}; +static struct regulator_consumer_supply buck2_consumer = + REGULATOR_SUPPLY("vddint", NULL); static struct regulator_init_data aquila_buck1_data = { .constraints = { @@ -313,8 +312,8 @@ static struct regulator_init_data aquila_buck1_data = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = ARRAY_SIZE(buck1_consumer), - .consumer_supplies = buck1_consumer, + .num_consumer_supplies = 1, + .consumer_supplies = &buck1_consumer, }; static struct regulator_init_data aquila_buck2_data = { @@ -326,8 +325,8 @@ static struct regulator_init_data aquila_buck2_data = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = ARRAY_SIZE(buck2_consumer), - .consumer_supplies = buck2_consumer, + .num_consumer_supplies = 1, + .consumer_supplies = &buck2_consumer, }; static struct regulator_init_data aquila_buck3_data = { @@ -391,26 +390,14 @@ static struct max8998_platform_data aquila_max8998_pdata = { #endif static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = { - { - .dev_name = "5-001a", - .supply = "DBVDD", - }, { - .dev_name = "5-001a", - .supply = "AVDD2", - }, { - .dev_name = "5-001a", - .supply = "CPVDD", - }, + REGULATOR_SUPPLY("DBVDD", "5-001a"), + REGULATOR_SUPPLY("AVDD2", "5-001a"), + REGULATOR_SUPPLY("CPVDD", "5-001a"), }; static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = { - { - .dev_name = "5-001a", - .supply = "SPKVDD1", - }, { - .dev_name = "5-001a", - .supply = "SPKVDD2", - }, + REGULATOR_SUPPLY("SPKVDD1", "5-001a"), + REGULATOR_SUPPLY("SPKVDD2", "5-001a"), }; static struct regulator_init_data wm8994_fixed_voltage0_init_data = { @@ -459,15 +446,11 @@ static struct platform_device wm8994_fixed_voltage1 = { }, }; -static struct regulator_consumer_supply wm8994_avdd1_supply = { - .dev_name = "5-001a", - .supply = "AVDD1", -}; +static struct regulator_consumer_supply wm8994_avdd1_supply = + REGULATOR_SUPPLY("AVDD1", "5-001a"); -static struct regulator_consumer_supply wm8994_dcvdd_supply = { - .dev_name = "5-001a", - .supply = "DCVDD", -}; +static struct regulator_consumer_supply wm8994_dcvdd_supply = + REGULATOR_SUPPLY("DCVDD", "5-001a"); static struct regulator_init_data wm8994_ldo1_data = { .constraints = { @@ -664,6 +647,7 @@ static void __init aquila_map_io(void) s5p_init_io(NULL, 0, S5P_VA_CHIPID); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs)); + s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } static void __init aquila_machine_init(void) @@ -698,5 +682,5 @@ MACHINE_START(AQUILA, "Aquila") .init_irq = s5pv210_init_irq, .map_io = aquila_map_io, .init_machine = aquila_machine_init, - .timer = &s3c24xx_timer, + .timer = &s5p_timer, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 056f5c769b0..243291722c6 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -45,6 +45,7 @@ #include <plat/keypad.h> #include <plat/sdhci.h> #include <plat/clock.h> +#include <plat/s5p-time.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -108,6 +109,8 @@ static struct s3c_fb_pd_win goni_fb_win0 = { }, .max_bpp = 32, .default_bpp = 16, + .virtual_x = 480, + .virtual_y = 2 * 800, }; static struct s3c_fb_platdata goni_lcd_pdata __initdata = { @@ -269,10 +272,30 @@ static void __init goni_tsp_init(void) /* MAX8998 regulators */ #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) +static struct regulator_consumer_supply goni_ldo3_consumers[] = { + REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), +}; + static struct regulator_consumer_supply goni_ldo5_consumers[] = { REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), }; +static struct regulator_consumer_supply goni_ldo8_consumers[] = { + REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), +}; + +static struct regulator_consumer_supply goni_ldo11_consumers[] = { + REGULATOR_SUPPLY("vddio", "0-0030"), /* "CAM_IO_2.8V" */ +}; + +static struct regulator_consumer_supply goni_ldo13_consumers[] = { + REGULATOR_SUPPLY("vdda", "0-0030"), /* "CAM_A_2.8V" */ +}; + +static struct regulator_consumer_supply goni_ldo14_consumers[] = { + REGULATOR_SUPPLY("vdd_core", "0-0030"), /* "CAM_CIF_1.8V" */ +}; + static struct regulator_init_data goni_ldo2_data = { .constraints = { .name = "VALIVE_1.1V", @@ -292,8 +315,10 @@ static struct regulator_init_data goni_ldo3_data = { .min_uV = 1100000, .max_uV = 1100000, .apply_uV = 1, - .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(goni_ldo3_consumers), + .consumer_supplies = goni_ldo3_consumers, }; static struct regulator_init_data goni_ldo4_data = { @@ -311,6 +336,7 @@ static struct regulator_init_data goni_ldo5_data = { .min_uV = 2800000, .max_uV = 2800000, .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(goni_ldo5_consumers), .consumer_supplies = goni_ldo5_consumers, @@ -341,8 +367,10 @@ static struct regulator_init_data goni_ldo8_data = { .min_uV = 3300000, .max_uV = 3300000, .apply_uV = 1, - .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(goni_ldo8_consumers), + .consumer_supplies = goni_ldo8_consumers, }; static struct regulator_init_data goni_ldo9_data = { @@ -351,7 +379,6 @@ static struct regulator_init_data goni_ldo9_data = { .min_uV = 2800000, .max_uV = 2800000, .apply_uV = 1, - .always_on = 1, }, }; @@ -371,8 +398,10 @@ static struct regulator_init_data goni_ldo11_data = { .min_uV = 2800000, .max_uV = 2800000, .apply_uV = 1, - .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(goni_ldo11_consumers), + .consumer_supplies = goni_ldo11_consumers, }; static struct regulator_init_data goni_ldo12_data = { @@ -381,7 +410,6 @@ static struct regulator_init_data goni_ldo12_data = { .min_uV = 1200000, .max_uV = 1200000, .apply_uV = 1, - .always_on = 1, }, }; @@ -391,8 +419,10 @@ static struct regulator_init_data goni_ldo13_data = { .min_uV = 2800000, .max_uV = 2800000, .apply_uV = 1, - .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(goni_ldo13_consumers), + .consumer_supplies = goni_ldo13_consumers, }; static struct regulator_init_data goni_ldo14_data = { @@ -401,8 +431,10 @@ static struct regulator_init_data goni_ldo14_data = { .min_uV = 1800000, .max_uV = 1800000, .apply_uV = 1, - .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(goni_ldo14_consumers), + .consumer_supplies = goni_ldo14_consumers, }; static struct regulator_init_data goni_ldo15_data = { @@ -411,7 +443,6 @@ static struct regulator_init_data goni_ldo15_data = { .min_uV = 3300000, .max_uV = 3300000, .apply_uV = 1, - .always_on = 1, }, }; @@ -421,7 +452,6 @@ static struct regulator_init_data goni_ldo16_data = { .min_uV = 1800000, .max_uV = 1800000, .apply_uV = 1, - .always_on = 1, }, }; @@ -436,13 +466,11 @@ static struct regulator_init_data goni_ldo17_data = { }; /* BUCK */ -static struct regulator_consumer_supply buck1_consumer[] = { - { .supply = "vddarm", }, -}; +static struct regulator_consumer_supply buck1_consumer = + REGULATOR_SUPPLY("vddarm", NULL); -static struct regulator_consumer_supply buck2_consumer[] = { - { .supply = "vddint", }, -}; +static struct regulator_consumer_supply buck2_consumer = + REGULATOR_SUPPLY("vddint", NULL); static struct regulator_init_data goni_buck1_data = { .constraints = { @@ -453,8 +481,8 @@ static struct regulator_init_data goni_buck1_data = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = ARRAY_SIZE(buck1_consumer), - .consumer_supplies = buck1_consumer, + .num_consumer_supplies = 1, + .consumer_supplies = &buck1_consumer, }; static struct regulator_init_data goni_buck2_data = { @@ -466,8 +494,8 @@ static struct regulator_init_data goni_buck2_data = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = ARRAY_SIZE(buck2_consumer), - .consumer_supplies = buck2_consumer, + .num_consumer_supplies = 1, + .consumer_supplies = &buck2_consumer, }; static struct regulator_init_data goni_buck3_data = { @@ -531,26 +559,14 @@ static struct max8998_platform_data goni_max8998_pdata = { #endif static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = { - { - .dev_name = "5-001a", - .supply = "DBVDD", - }, { - .dev_name = "5-001a", - .supply = "AVDD2", - }, { - .dev_name = "5-001a", - .supply = "CPVDD", - }, + REGULATOR_SUPPLY("DBVDD", "5-001a"), + REGULATOR_SUPPLY("AVDD2", "5-001a"), + REGULATOR_SUPPLY("CPVDD", "5-001a"), }; static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = { - { - .dev_name = "5-001a", - .supply = "SPKVDD1", - }, { - .dev_name = "5-001a", - .supply = "SPKVDD2", - }, + REGULATOR_SUPPLY("SPKVDD1", "5-001a"), + REGULATOR_SUPPLY("SPKVDD2", "5-001a"), }; static struct regulator_init_data wm8994_fixed_voltage0_init_data = { @@ -599,15 +615,11 @@ static struct platform_device wm8994_fixed_voltage1 = { }, }; -static struct regulator_consumer_supply wm8994_avdd1_supply = { - .dev_name = "5-001a", - .supply = "AVDD1", -}; +static struct regulator_consumer_supply wm8994_avdd1_supply = + REGULATOR_SUPPLY("AVDD1", "5-001a"); -static struct regulator_consumer_supply wm8994_dcvdd_supply = { - .dev_name = "5-001a", - .supply = "DCVDD", -}; +static struct regulator_consumer_supply wm8994_dcvdd_supply = + REGULATOR_SUPPLY("DCVDD", "5-001a"); static struct regulator_init_data wm8994_ldo1_data = { .constraints = { @@ -794,6 +806,7 @@ static struct platform_device *goni_devices[] __initdata = { &goni_i2c_gpio5, &mmc2_fixed_voltage, &goni_device_gpiokeys, + &s3c_device_i2c0, &s5p_device_fimc0, &s5p_device_fimc1, &s5p_device_fimc2, @@ -823,6 +836,7 @@ static void __init goni_map_io(void) s5p_init_io(NULL, 0, S5P_VA_CHIPID); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs)); + s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } static void __init goni_machine_init(void) @@ -830,6 +844,9 @@ static void __init goni_machine_init(void) /* Radio: call before I2C 1 registeration */ goni_radio_init(); + /* I2C0 */ + s3c_i2c0_set_platdata(NULL); + /* I2C1 */ s3c_i2c1_set_platdata(NULL); i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); @@ -873,5 +890,5 @@ MACHINE_START(GONI, "GONI") .init_irq = s5pv210_init_irq, .map_io = goni_map_io, .init_machine = goni_machine_init, - .timer = &s3c24xx_timer, + .timer = &s5p_timer, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index ce11a02eabf..6c412c8cecc 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -30,6 +30,7 @@ #include <plat/ata.h> #include <plat/iic.h> #include <plat/pm.h> +#include <plat/s5p-time.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKC110_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -111,6 +112,7 @@ static void __init smdkc110_map_io(void) s5p_init_io(NULL, 0, S5P_VA_CHIPID); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); + s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } static void __init smdkc110_machine_init(void) @@ -138,5 +140,5 @@ MACHINE_START(SMDKC110, "SMDKC110") .init_irq = s5pv210_init_irq, .map_io = smdkc110_map_io, .init_machine = smdkc110_machine_init, - .timer = &s3c24xx_timer, + .timer = &s5p_timer, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index bc9fdb52a02..bc08ac42e7c 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -18,6 +18,7 @@ #include <linux/fb.h> #include <linux/gpio.h> #include <linux/delay.h> +#include <linux/pwm_backlight.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -43,6 +44,8 @@ #include <plat/keypad.h> #include <plat/pm.h> #include <plat/fb.h> +#include <plat/gpio-cfg.h> +#include <plat/s5p-time.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -208,6 +211,45 @@ static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = { .setup_gpio = s5pv210_fb_gpio_setup_24bpp, }; +static int smdkv210_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(S5PV210_GPD0(3), "Backlight"); + if (ret) { + printk(KERN_ERR "failed to request GPD for PWM-OUT 3\n"); + return ret; + } + + /* Configure GPIO pin with S5PV210_GPD_0_3_TOUT_3 */ + s3c_gpio_cfgpin(S5PV210_GPD0(3), S3C_GPIO_SFN(2)); + + return 0; +} + +static void smdkv210_backlight_exit(struct device *dev) +{ + s3c_gpio_cfgpin(S5PV210_GPD0(3), S3C_GPIO_OUTPUT); + gpio_free(S5PV210_GPD0(3)); +} + +static struct platform_pwm_backlight_data smdkv210_backlight_data = { + .pwm_id = 3, + .max_brightness = 255, + .dft_brightness = 255, + .pwm_period_ns = 78770, + .init = smdkv210_backlight_init, + .exit = smdkv210_backlight_exit, +}; + +static struct platform_device smdkv210_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &s3c_device_timer[3].dev, + .platform_data = &smdkv210_backlight_data, + }, +}; + static struct platform_device *smdkv210_devices[] __initdata = { &s3c_device_adc, &s3c_device_cfcon, @@ -229,6 +271,8 @@ static struct platform_device *smdkv210_devices[] __initdata = { &samsung_device_keypad, &smdkv210_dm9000, &smdkv210_lcd_lte480wv, + &s3c_device_timer[3], + &smdkv210_backlight_device, }; static void __init smdkv210_dm9000_init(void) @@ -272,6 +316,7 @@ static void __init smdkv210_map_io(void) s5p_init_io(NULL, 0, S5P_VA_CHIPID); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); + s5p_set_timer_source(S5P_PWM2, S5P_PWM4); } static void __init smdkv210_machine_init(void) @@ -306,5 +351,5 @@ MACHINE_START(SMDKV210, "SMDKV210") .init_irq = s5pv210_init_irq, .map_io = smdkv210_map_io, .init_machine = smdkv210_machine_init, - .timer = &s3c24xx_timer, + .timer = &s5p_timer, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c index 043c938806b..925fc0dc625 100644 --- a/arch/arm/mach-s5pv210/mach-torbreck.c +++ b/arch/arm/mach-s5pv210/mach-torbreck.c @@ -27,6 +27,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/iic.h> +#include <plat/s5p-time.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define TORBRECK_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -104,6 +105,7 @@ static void __init torbreck_map_io(void) s5p_init_io(NULL, 0, S5P_VA_CHIPID); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs)); + s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } static void __init torbreck_machine_init(void) @@ -127,5 +129,5 @@ MACHINE_START(TORBRECK, "TORBRECK") .init_irq = s5pv210_init_irq, .map_io = torbreck_map_io, .init_machine = torbreck_machine_init, - .timer = &s3c24xx_timer, + .timer = &s5p_timer, MACHINE_END diff --git a/arch/arm/mach-s5pv210/setup-fimc.c b/arch/arm/mach-s5pv210/setup-fimc.c new file mode 100644 index 00000000000..54cc5b11be0 --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-fimc.c @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * + * S5PV210 camera interface GPIO configuration. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <plat/gpio-cfg.h> +#include <plat/camport.h> + +int s5pv210_fimc_setup_gpio(enum s5p_camport_id id) +{ + u32 gpio8, gpio5; + int ret; + + switch (id) { + case S5P_CAMPORT_A: + gpio8 = S5PV210_GPE0(0); + gpio5 = S5PV210_GPE1(0); + break; + + case S5P_CAMPORT_B: + gpio8 = S5PV210_GPJ0(0); + gpio5 = S5PV210_GPJ1(0); + break; + + default: + WARN(1, "Wrong camport id: %d\n", id); + return -EINVAL; + } + + ret = s3c_gpio_cfgall_range(gpio8, 8, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_UP); + if (ret) + return ret; + + return s3c_gpio_cfgall_range(gpio5, 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-s5pv310/Kconfig b/arch/arm/mach-s5pv310/Kconfig deleted file mode 100644 index b2a9acc5185..00000000000 --- a/arch/arm/mach-s5pv310/Kconfig +++ /dev/null @@ -1,151 +0,0 @@ -# arch/arm/mach-s5pv310/Kconfig -# -# Copyright (c) 2010 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -# Configuration options for the S5PV310 - -if ARCH_S5PV310 - -config CPU_S5PV310 - bool - select S3C_PL330_DMA - help - Enable S5PV310 CPU support - -config S5PV310_DEV_PD - bool - help - Compile in platform device definitions for Power Domain - -config S5PV310_SETUP_I2C1 - bool - help - Common setup code for i2c bus 1. - -config S5PV310_SETUP_I2C2 - bool - help - Common setup code for i2c bus 2. - -config S5PV310_SETUP_I2C3 - bool - help - Common setup code for i2c bus 3. - -config S5PV310_SETUP_I2C4 - bool - help - Common setup code for i2c bus 4. - -config S5PV310_SETUP_I2C5 - bool - help - Common setup code for i2c bus 5. - -config S5PV310_SETUP_I2C6 - bool - help - Common setup code for i2c bus 6. - -config S5PV310_SETUP_I2C7 - bool - help - Common setup code for i2c bus 7. - -config S5PV310_SETUP_SDHCI - bool - select S5PV310_SETUP_SDHCI_GPIO - help - Internal helper functions for S5PV310 based SDHCI systems. - -config S5PV310_SETUP_SDHCI_GPIO - bool - help - Common setup code for SDHCI gpio. - -config S5PV310_DEV_SYSMMU - bool - help - Common setup code for SYSTEM MMU in S5PV310 - -# machine support - -menu "S5PC210 Machines" - -config MACH_SMDKC210 - bool "SMDKC210" - select CPU_S5PV310 - select S3C_DEV_RTC - select S3C_DEV_WDT - select S3C_DEV_I2C1 - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S5PV310_DEV_PD - select S5PV310_SETUP_I2C1 - select S5PV310_SETUP_SDHCI - select S5PV310_DEV_SYSMMU - help - Machine support for Samsung SMDKC210 - S5PC210(MCP) is one of package option of S5PV310 - -config MACH_UNIVERSAL_C210 - bool "Mobile UNIVERSAL_C210 Board" - select CPU_S5PV310 - select S5P_DEV_ONENAND - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S5PV310_SETUP_SDHCI - select S3C_DEV_I2C1 - select S5PV310_SETUP_I2C1 - help - Machine support for Samsung Mobile Universal S5PC210 Reference - Board. S5PC210(MCP) is one of package option of S5PV310 - -endmenu - -menu "S5PV310 Machines" - -config MACH_SMDKV310 - bool "SMDKV310" - select CPU_S5PV310 - select S3C_DEV_RTC - select S3C_DEV_WDT - select S3C_DEV_I2C1 - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S5PV310_DEV_PD - select S5PV310_DEV_SYSMMU - select S5PV310_SETUP_I2C1 - select S5PV310_SETUP_SDHCI - help - Machine support for Samsung SMDKV310 - -endmenu - -comment "Configuration for HSMMC bus width" - -menu "Use 8-bit bus width" - -config S5PV310_SDHCI_CH0_8BIT - bool "Channel 0 with 8-bit bus" - help - Support HSMMC Channel 0 8-bit bus. - If selected, Channel 1 is disabled. - -config S5PV310_SDHCI_CH2_8BIT - bool "Channel 2 with 8-bit bus" - help - Support HSMMC Channel 2 8-bit bus. - If selected, Channel 3 is disabled. - -endmenu - -endif diff --git a/arch/arm/mach-s5pv310/Makefile b/arch/arm/mach-s5pv310/Makefile deleted file mode 100644 index 036fb383b83..00000000000 --- a/arch/arm/mach-s5pv310/Makefile +++ /dev/null @@ -1,43 +0,0 @@ -# arch/arm/mach-s5pv310/Makefile -# -# Copyright (c) 2010 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -# Core support for S5PV310 system - -obj-$(CONFIG_CPU_S5PV310) += cpu.o init.o clock.o irq-combiner.o -obj-$(CONFIG_CPU_S5PV310) += setup-i2c0.o time.o gpiolib.o irq-eint.o dma.o -obj-$(CONFIG_CPU_FREQ) += cpufreq.o - -obj-$(CONFIG_SMP) += platsmp.o headsmp.o -obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o - -# machine support - -obj-$(CONFIG_MACH_SMDKC210) += mach-smdkc210.o -obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o -obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o - -# device support - -obj-y += dev-audio.o -obj-$(CONFIG_S5PV310_DEV_PD) += dev-pd.o -obj-$(CONFIG_S5PV310_DEV_SYSMMU) += dev-sysmmu.o - -obj-$(CONFIG_S5PV310_SETUP_I2C1) += setup-i2c1.o -obj-$(CONFIG_S5PV310_SETUP_I2C2) += setup-i2c2.o -obj-$(CONFIG_S5PV310_SETUP_I2C3) += setup-i2c3.o -obj-$(CONFIG_S5PV310_SETUP_I2C4) += setup-i2c4.o -obj-$(CONFIG_S5PV310_SETUP_I2C5) += setup-i2c5.o -obj-$(CONFIG_S5PV310_SETUP_I2C6) += setup-i2c6.o -obj-$(CONFIG_S5PV310_SETUP_I2C7) += setup-i2c7.o -obj-$(CONFIG_S5PV310_SETUP_SDHCI) += setup-sdhci.o -obj-$(CONFIG_S5PV310_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o diff --git a/arch/arm/mach-s5pv310/gpiolib.c b/arch/arm/mach-s5pv310/gpiolib.c deleted file mode 100644 index 55217b8923e..00000000000 --- a/arch/arm/mach-s5pv310/gpiolib.c +++ /dev/null @@ -1,304 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/gpiolib.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV310 - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <mach/map.h> - -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> - -static struct s3c_gpio_cfg gpio_cfg = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -/* - * Following are the gpio banks in v310. - * - * The 'config' member when left to NULL, is initialized to the default - * structure gpio_cfg in the init function below. - * - * The 'base' member is also initialized in the init function below. - * Note: The initialization of 'base' member of s3c_gpio_chip structure - * uses the above macro and depends on the banks being listed in order here. - */ -static struct s3c_gpio_chip s5pv310_gpio_part1_4bit[] = { - { - .chip = { - .base = S5PV310_GPA0(0), - .ngpio = S5PV310_GPIO_A0_NR, - .label = "GPA0", - }, - }, { - .chip = { - .base = S5PV310_GPA1(0), - .ngpio = S5PV310_GPIO_A1_NR, - .label = "GPA1", - }, - }, { - .chip = { - .base = S5PV310_GPB(0), - .ngpio = S5PV310_GPIO_B_NR, - .label = "GPB", - }, - }, { - .chip = { - .base = S5PV310_GPC0(0), - .ngpio = S5PV310_GPIO_C0_NR, - .label = "GPC0", - }, - }, { - .chip = { - .base = S5PV310_GPC1(0), - .ngpio = S5PV310_GPIO_C1_NR, - .label = "GPC1", - }, - }, { - .chip = { - .base = S5PV310_GPD0(0), - .ngpio = S5PV310_GPIO_D0_NR, - .label = "GPD0", - }, - }, { - .chip = { - .base = S5PV310_GPD1(0), - .ngpio = S5PV310_GPIO_D1_NR, - .label = "GPD1", - }, - }, { - .chip = { - .base = S5PV310_GPE0(0), - .ngpio = S5PV310_GPIO_E0_NR, - .label = "GPE0", - }, - }, { - .chip = { - .base = S5PV310_GPE1(0), - .ngpio = S5PV310_GPIO_E1_NR, - .label = "GPE1", - }, - }, { - .chip = { - .base = S5PV310_GPE2(0), - .ngpio = S5PV310_GPIO_E2_NR, - .label = "GPE2", - }, - }, { - .chip = { - .base = S5PV310_GPE3(0), - .ngpio = S5PV310_GPIO_E3_NR, - .label = "GPE3", - }, - }, { - .chip = { - .base = S5PV310_GPE4(0), - .ngpio = S5PV310_GPIO_E4_NR, - .label = "GPE4", - }, - }, { - .chip = { - .base = S5PV310_GPF0(0), - .ngpio = S5PV310_GPIO_F0_NR, - .label = "GPF0", - }, - }, { - .chip = { - .base = S5PV310_GPF1(0), - .ngpio = S5PV310_GPIO_F1_NR, - .label = "GPF1", - }, - }, { - .chip = { - .base = S5PV310_GPF2(0), - .ngpio = S5PV310_GPIO_F2_NR, - .label = "GPF2", - }, - }, { - .chip = { - .base = S5PV310_GPF3(0), - .ngpio = S5PV310_GPIO_F3_NR, - .label = "GPF3", - }, - }, -}; - -static struct s3c_gpio_chip s5pv310_gpio_part2_4bit[] = { - { - .chip = { - .base = S5PV310_GPJ0(0), - .ngpio = S5PV310_GPIO_J0_NR, - .label = "GPJ0", - }, - }, { - .chip = { - .base = S5PV310_GPJ1(0), - .ngpio = S5PV310_GPIO_J1_NR, - .label = "GPJ1", - }, - }, { - .chip = { - .base = S5PV310_GPK0(0), - .ngpio = S5PV310_GPIO_K0_NR, - .label = "GPK0", - }, - }, { - .chip = { - .base = S5PV310_GPK1(0), - .ngpio = S5PV310_GPIO_K1_NR, - .label = "GPK1", - }, - }, { - .chip = { - .base = S5PV310_GPK2(0), - .ngpio = S5PV310_GPIO_K2_NR, - .label = "GPK2", - }, - }, { - .chip = { - .base = S5PV310_GPK3(0), - .ngpio = S5PV310_GPIO_K3_NR, - .label = "GPK3", - }, - }, { - .chip = { - .base = S5PV310_GPL0(0), - .ngpio = S5PV310_GPIO_L0_NR, - .label = "GPL0", - }, - }, { - .chip = { - .base = S5PV310_GPL1(0), - .ngpio = S5PV310_GPIO_L1_NR, - .label = "GPL1", - }, - }, { - .chip = { - .base = S5PV310_GPL2(0), - .ngpio = S5PV310_GPIO_L2_NR, - .label = "GPL2", - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC00), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(0), - .chip = { - .base = S5PV310_GPX0(0), - .ngpio = S5PV310_GPIO_X0_NR, - .label = "GPX0", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC20), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(8), - .chip = { - .base = S5PV310_GPX1(0), - .ngpio = S5PV310_GPIO_X1_NR, - .label = "GPX1", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC40), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(16), - .chip = { - .base = S5PV310_GPX2(0), - .ngpio = S5PV310_GPIO_X2_NR, - .label = "GPX2", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC60), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(24), - .chip = { - .base = S5PV310_GPX3(0), - .ngpio = S5PV310_GPIO_X3_NR, - .label = "GPX3", - .to_irq = samsung_gpiolib_to_irq, - }, - }, -}; - -static struct s3c_gpio_chip s5pv310_gpio_part3_4bit[] = { - { - .chip = { - .base = S5PV310_GPZ(0), - .ngpio = S5PV310_GPIO_Z_NR, - .label = "GPZ", - }, - }, -}; - -static __init int s5pv310_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip; - int i; - int nr_chips; - - /* GPIO part 1 */ - - chip = s5pv310_gpio_part1_4bit; - nr_chips = ARRAY_SIZE(s5pv310_gpio_part1_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) - chip->config = &gpio_cfg; - if (chip->base == NULL) - chip->base = S5P_VA_GPIO1 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part1_4bit, nr_chips); - - /* GPIO part 2 */ - - chip = s5pv310_gpio_part2_4bit; - nr_chips = ARRAY_SIZE(s5pv310_gpio_part2_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) - chip->config = &gpio_cfg; - if (chip->base == NULL) - chip->base = S5P_VA_GPIO2 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part2_4bit, nr_chips); - - /* GPIO part 3 */ - - chip = s5pv310_gpio_part3_4bit; - nr_chips = ARRAY_SIZE(s5pv310_gpio_part3_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) - chip->config = &gpio_cfg; - if (chip->base == NULL) - chip->base = S5P_VA_GPIO3 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part3_4bit, nr_chips); - - return 0; -} -core_initcall(s5pv310_gpiolib_init); diff --git a/arch/arm/mach-s5pv310/include/mach/gpio.h b/arch/arm/mach-s5pv310/include/mach/gpio.h deleted file mode 100644 index 20cb80c2346..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/gpio.h +++ /dev/null @@ -1,135 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/gpio.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV310 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H __FILE__ - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -/* Practically, GPIO banks upto GPZ are the configurable gpio banks */ - -/* GPIO bank sizes */ -#define S5PV310_GPIO_A0_NR (8) -#define S5PV310_GPIO_A1_NR (6) -#define S5PV310_GPIO_B_NR (8) -#define S5PV310_GPIO_C0_NR (5) -#define S5PV310_GPIO_C1_NR (5) -#define S5PV310_GPIO_D0_NR (4) -#define S5PV310_GPIO_D1_NR (4) -#define S5PV310_GPIO_E0_NR (5) -#define S5PV310_GPIO_E1_NR (8) -#define S5PV310_GPIO_E2_NR (6) -#define S5PV310_GPIO_E3_NR (8) -#define S5PV310_GPIO_E4_NR (8) -#define S5PV310_GPIO_F0_NR (8) -#define S5PV310_GPIO_F1_NR (8) -#define S5PV310_GPIO_F2_NR (8) -#define S5PV310_GPIO_F3_NR (6) -#define S5PV310_GPIO_J0_NR (8) -#define S5PV310_GPIO_J1_NR (5) -#define S5PV310_GPIO_K0_NR (7) -#define S5PV310_GPIO_K1_NR (7) -#define S5PV310_GPIO_K2_NR (7) -#define S5PV310_GPIO_K3_NR (7) -#define S5PV310_GPIO_L0_NR (8) -#define S5PV310_GPIO_L1_NR (3) -#define S5PV310_GPIO_L2_NR (8) -#define S5PV310_GPIO_X0_NR (8) -#define S5PV310_GPIO_X1_NR (8) -#define S5PV310_GPIO_X2_NR (8) -#define S5PV310_GPIO_X3_NR (8) -#define S5PV310_GPIO_Z_NR (7) - -/* GPIO bank numbers */ - -#define S5PV310_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) - -enum s5p_gpio_number { - S5PV310_GPIO_A0_START = 0, - S5PV310_GPIO_A1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_A0), - S5PV310_GPIO_B_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_A1), - S5PV310_GPIO_C0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_B), - S5PV310_GPIO_C1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_C0), - S5PV310_GPIO_D0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_C1), - S5PV310_GPIO_D1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_D0), - S5PV310_GPIO_E0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_D1), - S5PV310_GPIO_E1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E0), - S5PV310_GPIO_E2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E1), - S5PV310_GPIO_E3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E2), - S5PV310_GPIO_E4_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E3), - S5PV310_GPIO_F0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E4), - S5PV310_GPIO_F1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F0), - S5PV310_GPIO_F2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F1), - S5PV310_GPIO_F3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F2), - S5PV310_GPIO_J0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F3), - S5PV310_GPIO_J1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_J0), - S5PV310_GPIO_K0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_J1), - S5PV310_GPIO_K1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K0), - S5PV310_GPIO_K2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K1), - S5PV310_GPIO_K3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K2), - S5PV310_GPIO_L0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K3), - S5PV310_GPIO_L1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_L0), - S5PV310_GPIO_L2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_L1), - S5PV310_GPIO_X0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_L2), - S5PV310_GPIO_X1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X0), - S5PV310_GPIO_X2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X1), - S5PV310_GPIO_X3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X2), - S5PV310_GPIO_Z_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X3), -}; - -/* S5PV310 GPIO number definitions */ -#define S5PV310_GPA0(_nr) (S5PV310_GPIO_A0_START + (_nr)) -#define S5PV310_GPA1(_nr) (S5PV310_GPIO_A1_START + (_nr)) -#define S5PV310_GPB(_nr) (S5PV310_GPIO_B_START + (_nr)) -#define S5PV310_GPC0(_nr) (S5PV310_GPIO_C0_START + (_nr)) -#define S5PV310_GPC1(_nr) (S5PV310_GPIO_C1_START + (_nr)) -#define S5PV310_GPD0(_nr) (S5PV310_GPIO_D0_START + (_nr)) -#define S5PV310_GPD1(_nr) (S5PV310_GPIO_D1_START + (_nr)) -#define S5PV310_GPE0(_nr) (S5PV310_GPIO_E0_START + (_nr)) -#define S5PV310_GPE1(_nr) (S5PV310_GPIO_E1_START + (_nr)) -#define S5PV310_GPE2(_nr) (S5PV310_GPIO_E2_START + (_nr)) -#define S5PV310_GPE3(_nr) (S5PV310_GPIO_E3_START + (_nr)) -#define S5PV310_GPE4(_nr) (S5PV310_GPIO_E4_START + (_nr)) -#define S5PV310_GPF0(_nr) (S5PV310_GPIO_F0_START + (_nr)) -#define S5PV310_GPF1(_nr) (S5PV310_GPIO_F1_START + (_nr)) -#define S5PV310_GPF2(_nr) (S5PV310_GPIO_F2_START + (_nr)) -#define S5PV310_GPF3(_nr) (S5PV310_GPIO_F3_START + (_nr)) -#define S5PV310_GPJ0(_nr) (S5PV310_GPIO_J0_START + (_nr)) -#define S5PV310_GPJ1(_nr) (S5PV310_GPIO_J1_START + (_nr)) -#define S5PV310_GPK0(_nr) (S5PV310_GPIO_K0_START + (_nr)) -#define S5PV310_GPK1(_nr) (S5PV310_GPIO_K1_START + (_nr)) -#define S5PV310_GPK2(_nr) (S5PV310_GPIO_K2_START + (_nr)) -#define S5PV310_GPK3(_nr) (S5PV310_GPIO_K3_START + (_nr)) -#define S5PV310_GPL0(_nr) (S5PV310_GPIO_L0_START + (_nr)) -#define S5PV310_GPL1(_nr) (S5PV310_GPIO_L1_START + (_nr)) -#define S5PV310_GPL2(_nr) (S5PV310_GPIO_L2_START + (_nr)) -#define S5PV310_GPX0(_nr) (S5PV310_GPIO_X0_START + (_nr)) -#define S5PV310_GPX1(_nr) (S5PV310_GPIO_X1_START + (_nr)) -#define S5PV310_GPX2(_nr) (S5PV310_GPIO_X2_START + (_nr)) -#define S5PV310_GPX3(_nr) (S5PV310_GPIO_X3_START + (_nr)) -#define S5PV310_GPZ(_nr) (S5PV310_GPIO_Z_START + (_nr)) - -/* the end of the S5PV310 specific gpios */ -#define S5PV310_GPIO_END (S5PV310_GPZ(S5PV310_GPIO_Z_NR) + 1) -#define S3C_GPIO_END S5PV310_GPIO_END - -/* define the number of gpios we need to the one after the GPZ() range */ -#define ARCH_NR_GPIOS (S5PV310_GPZ(S5PV310_GPIO_Z_NR) + \ - CONFIG_SAMSUNG_GPIO_EXTRA + 1) - -#include <asm-generic/gpio.h> - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h deleted file mode 100644 index 901657fa7a1..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/map.h +++ /dev/null @@ -1,144 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/map.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV310 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H __FILE__ - -#include <plat/map-base.h> - -/* - * S5PV310 UART offset is 0x10000 but the older S5P SoCs are 0x400. - * So need to define it, and here is to avoid redefinition warning. - */ -#define S3C_UART_OFFSET (0x10000) - -#include <plat/map-s5p.h> - -#define S5PV310_PA_SYSRAM 0x02025000 - -#define S5PV310_PA_I2S0 0x03830000 -#define S5PV310_PA_I2S1 0xE3100000 -#define S5PV310_PA_I2S2 0xE2A00000 - -#define S5PV310_PA_PCM0 0x03840000 -#define S5PV310_PA_PCM1 0x13980000 -#define S5PV310_PA_PCM2 0x13990000 - -#define S5PV310_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000)) - -#define S5PC210_PA_ONENAND 0x0C000000 -#define S5PC210_PA_ONENAND_DMA 0x0C600000 - -#define S5PV310_PA_CHIPID 0x10000000 - -#define S5PV310_PA_SYSCON 0x10010000 -#define S5PV310_PA_PMU 0x10020000 -#define S5PV310_PA_CMU 0x10030000 - -#define S5PV310_PA_WATCHDOG 0x10060000 -#define S5PV310_PA_RTC 0x10070000 - -#define S5PV310_PA_DMC0 0x10400000 - -#define S5PV310_PA_COMBINER 0x10448000 - -#define S5PV310_PA_COREPERI 0x10500000 -#define S5PV310_PA_GIC_CPU 0x10500100 -#define S5PV310_PA_TWD 0x10500600 -#define S5PV310_PA_GIC_DIST 0x10501000 -#define S5PV310_PA_L2CC 0x10502000 - -#define S5PV310_PA_MDMA 0x10810000 -#define S5PV310_PA_PDMA0 0x12680000 -#define S5PV310_PA_PDMA1 0x12690000 - -#define S5PV310_PA_SYSMMU_MDMA 0x10A40000 -#define S5PV310_PA_SYSMMU_SSS 0x10A50000 -#define S5PV310_PA_SYSMMU_FIMC0 0x11A20000 -#define S5PV310_PA_SYSMMU_FIMC1 0x11A30000 -#define S5PV310_PA_SYSMMU_FIMC2 0x11A40000 -#define S5PV310_PA_SYSMMU_FIMC3 0x11A50000 -#define S5PV310_PA_SYSMMU_JPEG 0x11A60000 -#define S5PV310_PA_SYSMMU_FIMD0 0x11E20000 -#define S5PV310_PA_SYSMMU_FIMD1 0x12220000 -#define S5PV310_PA_SYSMMU_PCIe 0x12620000 -#define S5PV310_PA_SYSMMU_G2D 0x12A20000 -#define S5PV310_PA_SYSMMU_ROTATOR 0x12A30000 -#define S5PV310_PA_SYSMMU_MDMA2 0x12A40000 -#define S5PV310_PA_SYSMMU_TV 0x12E20000 -#define S5PV310_PA_SYSMMU_MFC_L 0x13620000 -#define S5PV310_PA_SYSMMU_MFC_R 0x13630000 - -#define S5PV310_PA_GPIO1 0x11400000 -#define S5PV310_PA_GPIO2 0x11000000 -#define S5PV310_PA_GPIO3 0x03860000 - -#define S5PV310_PA_MIPI_CSIS0 0x11880000 -#define S5PV310_PA_MIPI_CSIS1 0x11890000 - -#define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) - -#define S5PV310_PA_SROMC 0x12570000 - -#define S5PV310_PA_UART 0x13800000 - -#define S5PV310_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) - -#define S5PV310_PA_AC97 0x139A0000 - -#define S5PV310_PA_TIMER 0x139D0000 - -#define S5PV310_PA_SDRAM 0x40000000 - -#define S5PV310_PA_SPDIF 0xE1100000 - -/* Compatibiltiy Defines */ - -#define S3C_PA_HSMMC0 S5PV310_PA_HSMMC(0) -#define S3C_PA_HSMMC1 S5PV310_PA_HSMMC(1) -#define S3C_PA_HSMMC2 S5PV310_PA_HSMMC(2) -#define S3C_PA_HSMMC3 S5PV310_PA_HSMMC(3) -#define S3C_PA_IIC S5PV310_PA_IIC(0) -#define S3C_PA_IIC1 S5PV310_PA_IIC(1) -#define S3C_PA_IIC2 S5PV310_PA_IIC(2) -#define S3C_PA_IIC3 S5PV310_PA_IIC(3) -#define S3C_PA_IIC4 S5PV310_PA_IIC(4) -#define S3C_PA_IIC5 S5PV310_PA_IIC(5) -#define S3C_PA_IIC6 S5PV310_PA_IIC(6) -#define S3C_PA_IIC7 S5PV310_PA_IIC(7) -#define S3C_PA_RTC S5PV310_PA_RTC -#define S3C_PA_WDT S5PV310_PA_WATCHDOG - -#define S5P_PA_CHIPID S5PV310_PA_CHIPID -#define S5P_PA_MIPI_CSIS0 S5PV310_PA_MIPI_CSIS0 -#define S5P_PA_MIPI_CSIS1 S5PV310_PA_MIPI_CSIS1 -#define S5P_PA_ONENAND S5PC210_PA_ONENAND -#define S5P_PA_ONENAND_DMA S5PC210_PA_ONENAND_DMA -#define S5P_PA_SDRAM S5PV310_PA_SDRAM -#define S5P_PA_SROMC S5PV310_PA_SROMC -#define S5P_PA_SYSCON S5PV310_PA_SYSCON -#define S5P_PA_TIMER S5PV310_PA_TIMER - -/* UART */ - -#define S3C_PA_UART S5PV310_PA_UART - -#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) -#define S5P_PA_UART0 S5P_PA_UART(0) -#define S5P_PA_UART1 S5P_PA_UART(1) -#define S5P_PA_UART2 S5P_PA_UART(2) -#define S5P_PA_UART3 S5P_PA_UART(3) -#define S5P_PA_UART4 S5P_PA_UART(4) - -#define S5P_SZ_UART SZ_256 - -#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-gpio.h b/arch/arm/mach-s5pv310/include/mach/regs-gpio.h deleted file mode 100644 index 82e9e0c9d45..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/regs-gpio.h +++ /dev/null @@ -1,42 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/regs-gpio.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV310 - GPIO (including EINT) register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_GPIO_H -#define __ASM_ARCH_REGS_GPIO_H __FILE__ - -#include <mach/map.h> -#include <mach/irqs.h> - -#define S5PV310_EINT40CON (S5P_VA_GPIO2 + 0xE00) -#define S5P_EINT_CON(x) (S5PV310_EINT40CON + ((x) * 0x4)) - -#define S5PV310_EINT40FLTCON0 (S5P_VA_GPIO2 + 0xE80) -#define S5P_EINT_FLTCON(x) (S5PV310_EINT40FLTCON0 + ((x) * 0x4)) - -#define S5PV310_EINT40MASK (S5P_VA_GPIO2 + 0xF00) -#define S5P_EINT_MASK(x) (S5PV310_EINT40MASK + ((x) * 0x4)) - -#define S5PV310_EINT40PEND (S5P_VA_GPIO2 + 0xF40) -#define S5P_EINT_PEND(x) (S5PV310_EINT40PEND + ((x) * 0x4)) - -#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) - -#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) - -#define EINT_MODE S3C_GPIO_SFN(0xf) - -#define EINT_GPIO_0(x) S5PV310_GPX0(x) -#define EINT_GPIO_1(x) S5PV310_GPX1(x) -#define EINT_GPIO_2(x) S5PV310_GPX2(x) -#define EINT_GPIO_3(x) S5PV310_GPX3(x) - -#endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-pmu.h b/arch/arm/mach-s5pv310/include/mach/regs-pmu.h deleted file mode 100644 index fb333d0f607..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/regs-pmu.h +++ /dev/null @@ -1,30 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/regs-pmu.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV310 - Power management unit definition - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_PMU_H -#define __ASM_ARCH_REGS_PMU_H __FILE__ - -#include <mach/map.h> - -#define S5P_PMUREG(x) (S5P_VA_PMU + (x)) - -#define S5P_PMU_CAM_CONF S5P_PMUREG(0x3C00) -#define S5P_PMU_TV_CONF S5P_PMUREG(0x3C20) -#define S5P_PMU_MFC_CONF S5P_PMUREG(0x3C40) -#define S5P_PMU_G3D_CONF S5P_PMUREG(0x3C60) -#define S5P_PMU_LCD0_CONF S5P_PMUREG(0x3C80) -#define S5P_PMU_LCD1_CONF S5P_PMUREG(0x3CA0) -#define S5P_PMU_GPS_CONF S5P_PMUREG(0x3CE0) - -#define S5P_INT_LOCAL_PWR_EN 0x7 - -#endif /* __ASM_ARCH_REGS_PMU_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/sysmmu.h b/arch/arm/mach-s5pv310/include/mach/sysmmu.h deleted file mode 100644 index 598fc5c9211..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/sysmmu.h +++ /dev/null @@ -1,122 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/sysmmu.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Samsung sysmmu driver for S5PV310 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARM_ARCH_SYSMMU_H -#define __ASM_ARM_ARCH_SYSMMU_H __FILE__ - -#define S5PV310_SYSMMU_TOTAL_IPNUM 16 -#define S5P_SYSMMU_TOTAL_IPNUM S5PV310_SYSMMU_TOTAL_IPNUM - -enum s5pv310_sysmmu_ips { - SYSMMU_MDMA, - SYSMMU_SSS, - SYSMMU_FIMC0, - SYSMMU_FIMC1, - SYSMMU_FIMC2, - SYSMMU_FIMC3, - SYSMMU_JPEG, - SYSMMU_FIMD0, - SYSMMU_FIMD1, - SYSMMU_PCIe, - SYSMMU_G2D, - SYSMMU_ROTATOR, - SYSMMU_MDMA2, - SYSMMU_TV, - SYSMMU_MFC_L, - SYSMMU_MFC_R, -}; - -static char *sysmmu_ips_name[S5PV310_SYSMMU_TOTAL_IPNUM] = { - "SYSMMU_MDMA" , - "SYSMMU_SSS" , - "SYSMMU_FIMC0" , - "SYSMMU_FIMC1" , - "SYSMMU_FIMC2" , - "SYSMMU_FIMC3" , - "SYSMMU_JPEG" , - "SYSMMU_FIMD0" , - "SYSMMU_FIMD1" , - "SYSMMU_PCIe" , - "SYSMMU_G2D" , - "SYSMMU_ROTATOR", - "SYSMMU_MDMA2" , - "SYSMMU_TV" , - "SYSMMU_MFC_L" , - "SYSMMU_MFC_R" , -}; - -typedef enum s5pv310_sysmmu_ips sysmmu_ips; - -struct sysmmu_tt_info { - unsigned long *pgd; - unsigned long pgd_paddr; - unsigned long *pte; -}; - -struct sysmmu_controller { - const char *name; - - /* channels registers */ - void __iomem *regs; - - /* channel irq */ - unsigned int irq; - - sysmmu_ips ips; - - /* Translation Table Info. */ - struct sysmmu_tt_info *tt_info; - - struct resource *mem; - struct device *dev; - - /* SysMMU controller enable - true : enable */ - bool enable; -}; - -/** - * s5p_sysmmu_enable() - enable system mmu of ip - * @ips: The ip connected system mmu. - * - * This function enable system mmu to transfer address - * from virtual address to physical address - */ -int s5p_sysmmu_enable(sysmmu_ips ips); - -/** - * s5p_sysmmu_disable() - disable sysmmu mmu of ip - * @ips: The ip connected system mmu. - * - * This function disable system mmu to transfer address - * from virtual address to physical address - */ -int s5p_sysmmu_disable(sysmmu_ips ips); - -/** - * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table - * @ips: The ip connected system mmu. - * @pgd: The page table base address. - * - * This function set page table base address - * When system mmu transfer address from virtaul address to physical address, - * system mmu refer address information from page table - */ -int s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd); - -/** - * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu - * @ips: The ip connected system mmu. - * - * This function flush all TLB entry in system mmu - */ -int s5p_sysmmu_tlb_invalidate(sysmmu_ips ips); -#endif /* __ASM_ARM_ARCH_SYSMMU_H */ diff --git a/arch/arm/mach-s5pv310/mach-universal_c210.c b/arch/arm/mach-s5pv310/mach-universal_c210.c deleted file mode 100644 index 36bc3cf825e..00000000000 --- a/arch/arm/mach-s5pv310/mach-universal_c210.c +++ /dev/null @@ -1,237 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/mach-universal_c210.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/platform_device.h> -#include <linux/serial_core.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/gpio_keys.h> -#include <linux/gpio.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/mmc/host.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <plat/regs-serial.h> -#include <plat/s5pv310.h> -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/sdhci.h> - -#include <mach/map.h> - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define UNIVERSAL_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define UNIVERSAL_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG256 | \ - S5PV210_UFCON_RXTRIG256) - -static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .ucon = UNIVERSAL_UCON_DEFAULT, - .ulcon = UNIVERSAL_ULCON_DEFAULT, - .ufcon = UNIVERSAL_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .ucon = UNIVERSAL_UCON_DEFAULT, - .ulcon = UNIVERSAL_ULCON_DEFAULT, - .ufcon = UNIVERSAL_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .ucon = UNIVERSAL_UCON_DEFAULT, - .ulcon = UNIVERSAL_ULCON_DEFAULT, - .ufcon = UNIVERSAL_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .ucon = UNIVERSAL_UCON_DEFAULT, - .ulcon = UNIVERSAL_ULCON_DEFAULT, - .ufcon = UNIVERSAL_UFCON_DEFAULT, - }, -}; - -static struct gpio_keys_button universal_gpio_keys_tables[] = { - { - .code = KEY_VOLUMEUP, - .gpio = S5PV310_GPX2(0), /* XEINT16 */ - .desc = "gpio-keys: KEY_VOLUMEUP", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_VOLUMEDOWN, - .gpio = S5PV310_GPX2(1), /* XEINT17 */ - .desc = "gpio-keys: KEY_VOLUMEDOWN", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_CONFIG, - .gpio = S5PV310_GPX2(2), /* XEINT18 */ - .desc = "gpio-keys: KEY_CONFIG", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_CAMERA, - .gpio = S5PV310_GPX2(3), /* XEINT19 */ - .desc = "gpio-keys: KEY_CAMERA", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_OK, - .gpio = S5PV310_GPX3(5), /* XEINT29 */ - .desc = "gpio-keys: KEY_OK", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, -}; - -static struct gpio_keys_platform_data universal_gpio_keys_data = { - .buttons = universal_gpio_keys_tables, - .nbuttons = ARRAY_SIZE(universal_gpio_keys_tables), -}; - -static struct platform_device universal_gpio_keys = { - .name = "gpio-keys", - .dev = { - .platform_data = &universal_gpio_keys_data, - }, -}; - -/* eMMC */ -static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { - .max_width = 8, - .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE), - .cd_type = S3C_SDHCI_CD_PERMANENT, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -}; - -static struct regulator_consumer_supply mmc0_supplies[] = { - REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), -}; - -static struct regulator_init_data mmc0_fixed_voltage_init_data = { - .constraints = { - .name = "VMEM_VDD_2.8V", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(mmc0_supplies), - .consumer_supplies = mmc0_supplies, -}; - -static struct fixed_voltage_config mmc0_fixed_voltage_config = { - .supply_name = "MASSMEMORY_EN", - .microvolts = 2800000, - .gpio = S5PV310_GPE1(3), - .enable_high = true, - .init_data = &mmc0_fixed_voltage_init_data, -}; - -static struct platform_device mmc0_fixed_voltage = { - .name = "reg-fixed-voltage", - .id = 0, - .dev = { - .platform_data = &mmc0_fixed_voltage_config, - }, -}; - -/* SD */ -static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = { - .max_width = 4, - .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE, - .ext_cd_gpio = S5PV310_GPX3(4), /* XEINT_28 */ - .ext_cd_gpio_invert = 1, - .cd_type = S3C_SDHCI_CD_GPIO, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -}; - -/* WiFi */ -static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = { - .max_width = 4, - .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE, - .cd_type = S3C_SDHCI_CD_EXTERNAL, -}; - -static void __init universal_sdhci_init(void) -{ - s3c_sdhci0_set_platdata(&universal_hsmmc0_data); - s3c_sdhci2_set_platdata(&universal_hsmmc2_data); - s3c_sdhci3_set_platdata(&universal_hsmmc3_data); -} - -/* I2C0 */ -static struct i2c_board_info i2c0_devs[] __initdata = { - /* Camera, To be updated */ -}; - -/* I2C1 */ -static struct i2c_board_info i2c1_devs[] __initdata = { - /* Gyro, To be updated */ -}; - -static struct platform_device *universal_devices[] __initdata = { - /* Samsung Platform Devices */ - &mmc0_fixed_voltage, - &s3c_device_hsmmc0, - &s3c_device_hsmmc2, - &s3c_device_hsmmc3, - - /* Universal Devices */ - &universal_gpio_keys, - &s5p_device_onenand, -}; - -static void __init universal_map_io(void) -{ - s5p_init_io(NULL, 0, S5P_VA_CHIPID); - s3c24xx_init_clocks(24000000); - s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); -} - -static void __init universal_machine_init(void) -{ - universal_sdhci_init(); - - i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs)); - i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); - - /* Last */ - platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices)); -} - -MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") - /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, - .init_irq = s5pv310_init_irq, - .map_io = universal_map_io, - .init_machine = universal_machine_init, - .timer = &s5pv310_timer, -MACHINE_END diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c index fb6426ddeb7..4cb3c2dd905 100644 --- a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c +++ b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c @@ -6,6 +6,7 @@ * published by the Free Software Foundation. */ +#include <linux/delay.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/platform_device.h> @@ -17,6 +18,8 @@ #include <asm/mach/time.h> #include <mach/clock.h> +#include <mach/tcc-nand.h> +#include <mach/tcc8k-regs.h> #include "common.h" @@ -51,6 +54,22 @@ static struct sys_timer tcc8k_timer = { static void __init tcc8k_map_io(void) { tcc8k_map_common_io(); + + /* set PLL0 clock to 96MHz, adapt UART0 divisor */ + __raw_writel(0x00026003, CKC_BASE + PLL0CFG_OFFS); + __raw_writel(0x10000001, CKC_BASE + ACLKUART0_OFFS); + + /* set PLL1 clock to 192MHz */ + __raw_writel(0x00016003, CKC_BASE + PLL1CFG_OFFS); + + /* set PLL2 clock to 48MHz */ + __raw_writel(0x00036003, CKC_BASE + PLL2CFG_OFFS); + + /* with CPU freq higher than 150 MHz, need extra DTCM wait */ + __raw_writel(0x00000001, SCFG_BASE + DTCMWAIT_OFFS); + + /* PLL locking time as specified */ + udelay(300); } MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board") diff --git a/arch/arm/mach-tcc8k/clock.c b/arch/arm/mach-tcc8k/clock.c index 3970a9cdce2..e7cdae5c77a 100644 --- a/arch/arm/mach-tcc8k/clock.c +++ b/arch/arm/mach-tcc8k/clock.c @@ -45,11 +45,12 @@ #define ACLKGSB1 (CKC_BASE + ACLKGSB1_OFFS) #define ACLKGSB2 (CKC_BASE + ACLKGSB2_OFFS) #define ACLKGSB3 (CKC_BASE + ACLKGSB3_OFFS) -#define ACLKUSBH (CKC_BASE + ACLKUSBH_OFFS) #define ACLKTCT (CKC_BASE + ACLKTCT_OFFS) #define ACLKTCX (CKC_BASE + ACLKTCX_OFFS) #define ACLKTCZ (CKC_BASE + ACLKTCZ_OFFS) +#define ACLK_MAX_DIV (0xfff + 1) + /* Crystal frequencies */ static unsigned long xi_rate, xti_rate; @@ -106,9 +107,9 @@ static int root_clk_enable(enum root_clks src) return 0; } -static int root_clk_disable(enum root_clks root_src) +static int root_clk_disable(enum root_clks src) { - switch (root_src) { + switch (src) { case CLK_SRC_PLL0: return pll_enable(0, 0); case CLK_SRC_PLL1: return pll_enable(1, 0); case CLK_SRC_PLL2: return pll_enable(2, 0); @@ -197,7 +198,7 @@ static unsigned long get_rate_pll_div(int pll) addr = CKC_BASE + CLKDIVC1_OFFS; reg = __raw_readl(addr); if (reg & CLKDIVC1_P2E) - div = __raw_readl(addr) & 0x3f; + div = reg & 0x3f; break; } return get_rate_pll(pll) / (div + 1); @@ -258,14 +259,19 @@ static unsigned long aclk_best_div(struct clk *clk, unsigned long rate) { unsigned long div, src, freq, r1, r2; + if (!rate) + return ACLK_MAX_DIV; + src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT; src &= CLK_SRC_MASK; freq = root_clk_get_rate(src); - div = freq / rate + 1; + div = freq / rate; + if (!div) + return 1; + if (div >= ACLK_MAX_DIV) + return ACLK_MAX_DIV; r1 = freq / div; r2 = freq / (div + 1); - if (r2 >= rate) - return div + 1; if ((rate - r2) < (r1 - rate)) return div + 1; @@ -287,7 +293,8 @@ static int aclk_set_rate(struct clk *clk, unsigned long rate) u32 reg; reg = __raw_readl(clk->aclkreg) & ~ACLK_DIV_MASK; - reg |= aclk_best_div(clk, rate); + reg |= aclk_best_div(clk, rate) - 1; + __raw_writel(reg, clk->aclkreg); return 0; } @@ -296,15 +303,22 @@ static unsigned long get_rate_sys(struct clk *clk) unsigned int src; src = __raw_readl(CKC_BASE + CLKCTRL_OFFS) & CLK_SRC_MASK; - return root_clk_get_rate(src); + return root_clk_get_rate(src); } static unsigned long get_rate_bus(struct clk *clk) { - unsigned int div; + unsigned int reg, sdiv, bdiv, rate; - div = (__raw_readl(CKC_BASE + CLKCTRL_OFFS) >> 4) & 0xff; - return get_rate_sys(clk) / (div + 1); + reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS); + rate = get_rate_sys(clk); + sdiv = (reg >> 20) & 3; + if (sdiv) + rate /= sdiv + 1; + bdiv = (reg >> 4) & 0xff; + if (bdiv) + rate /= bdiv + 1; + return rate; } static unsigned long get_rate_cpu(struct clk *clk) diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index aa53ee22438..513d6abec1f 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -3,7 +3,7 @@ * arch/arm/mach-u300/core.c * * - * Copyright (C) 2007-2010 ST-Ericsson AB + * Copyright (C) 2007-2010 ST-Ericsson SA * License terms: GNU General Public License (GPL) version 2 * Core platform support, IRQ handling and device definitions. * Author: Linus Walleij <linus.walleij@stericsson.com> @@ -16,7 +16,9 @@ #include <linux/device.h> #include <linux/mm.h> #include <linux/termios.h> +#include <linux/dmaengine.h> #include <linux/amba/bus.h> +#include <linux/amba/serial.h> #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/clk.h> @@ -96,10 +98,20 @@ void __init u300_map_io(void) * Declaration of devices found on the U300 board and * their respective memory locations. */ + +static struct amba_pl011_data uart0_plat_data = { +#ifdef CONFIG_COH901318 + .dma_filter = coh901318_filter_id, + .dma_rx_param = (void *) U300_DMA_UART0_RX, + .dma_tx_param = (void *) U300_DMA_UART0_TX, +#endif +}; + static struct amba_device uart0_device = { .dev = { + .coherent_dma_mask = ~0, .init_name = "uart0", /* Slow device at 0x3000 offset */ - .platform_data = NULL, + .platform_data = &uart0_plat_data, }, .res = { .start = U300_UART0_BASE, @@ -111,10 +123,19 @@ static struct amba_device uart0_device = { /* The U335 have an additional UART1 on the APP CPU */ #ifdef CONFIG_MACH_U300_BS335 +static struct amba_pl011_data uart1_plat_data = { +#ifdef CONFIG_COH901318 + .dma_filter = coh901318_filter_id, + .dma_rx_param = (void *) U300_DMA_UART1_RX, + .dma_tx_param = (void *) U300_DMA_UART1_TX, +#endif +}; + static struct amba_device uart1_device = { .dev = { + .coherent_dma_mask = ~0, .init_name = "uart1", /* Fast device at 0x7000 offset */ - .platform_data = NULL, + .platform_data = &uart1_plat_data, }, .res = { .start = U300_UART1_BASE, @@ -960,42 +981,37 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .priority_high = 0, .dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x220, }, + /* + * Don't set up device address, burst count or size of src + * or dst bus for this peripheral - handled by PrimeCell + * DMA extension. + */ { .number = U300_DMA_MMCSD_RX_TX, .name = "MMCSD RX TX", .priority_high = 0, - .dev_addr = U300_MMCSD_BASE + 0x080, .param.config = COH901318_CX_CFG_CH_DISABLE | COH901318_CX_CFG_LCR_DISABLE | COH901318_CX_CFG_TC_IRQ_ENABLE | COH901318_CX_CFG_BE_IRQ_ENABLE, .param.ctrl_lli_chained = 0 | COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | COH901318_CX_CTRL_MASTER_MODE_M1RW | COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | + COH901318_CX_CTRL_TC_IRQ_DISABLE | COH901318_CX_CTRL_HSP_ENABLE | COH901318_CX_CTRL_HSS_DISABLE | COH901318_CX_CTRL_DDMA_LEGACY, .param.ctrl_lli = 0 | COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | COH901318_CX_CTRL_MASTER_MODE_M1RW | COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | + COH901318_CX_CTRL_TC_IRQ_DISABLE | COH901318_CX_CTRL_HSP_ENABLE | COH901318_CX_CTRL_HSS_DISABLE | COH901318_CX_CTRL_DDMA_LEGACY, .param.ctrl_lli_last = 0 | COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | COH901318_CX_CTRL_MASTER_MODE_M1RW | COH901318_CX_CTRL_TCP_DISABLE | COH901318_CX_CTRL_TC_IRQ_ENABLE | @@ -1014,15 +1030,76 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .name = "MSPRO RX", .priority_high = 0, }, + /* + * Don't set up device address, burst count or size of src + * or dst bus for this peripheral - handled by PrimeCell + * DMA extension. + */ { .number = U300_DMA_UART0_TX, .name = "UART0 TX", .priority_high = 0, + .param.config = COH901318_CX_CFG_CH_DISABLE | + COH901318_CX_CFG_LCR_DISABLE | + COH901318_CX_CFG_TC_IRQ_ENABLE | + COH901318_CX_CFG_BE_IRQ_ENABLE, + .param.ctrl_lli_chained = 0 | + COH901318_CX_CTRL_TC_ENABLE | + COH901318_CX_CTRL_MASTER_MODE_M1RW | + COH901318_CX_CTRL_TCP_ENABLE | + COH901318_CX_CTRL_TC_IRQ_DISABLE | + COH901318_CX_CTRL_HSP_ENABLE | + COH901318_CX_CTRL_HSS_DISABLE | + COH901318_CX_CTRL_DDMA_LEGACY, + .param.ctrl_lli = 0 | + COH901318_CX_CTRL_TC_ENABLE | + COH901318_CX_CTRL_MASTER_MODE_M1RW | + COH901318_CX_CTRL_TCP_ENABLE | + COH901318_CX_CTRL_TC_IRQ_ENABLE | + COH901318_CX_CTRL_HSP_ENABLE | + COH901318_CX_CTRL_HSS_DISABLE | + COH901318_CX_CTRL_DDMA_LEGACY, + .param.ctrl_lli_last = 0 | + COH901318_CX_CTRL_TC_ENABLE | + COH901318_CX_CTRL_MASTER_MODE_M1RW | + COH901318_CX_CTRL_TCP_ENABLE | + COH901318_CX_CTRL_TC_IRQ_ENABLE | + COH901318_CX_CTRL_HSP_ENABLE | + COH901318_CX_CTRL_HSS_DISABLE | + COH901318_CX_CTRL_DDMA_LEGACY, }, { .number = U300_DMA_UART0_RX, .name = "UART0 RX", .priority_high = 0, + .param.config = COH901318_CX_CFG_CH_DISABLE | + COH901318_CX_CFG_LCR_DISABLE | + COH901318_CX_CFG_TC_IRQ_ENABLE | + COH901318_CX_CFG_BE_IRQ_ENABLE, + .param.ctrl_lli_chained = 0 | + COH901318_CX_CTRL_TC_ENABLE | + COH901318_CX_CTRL_MASTER_MODE_M1RW | + COH901318_CX_CTRL_TCP_ENABLE | + COH901318_CX_CTRL_TC_IRQ_DISABLE | + COH901318_CX_CTRL_HSP_ENABLE | + COH901318_CX_CTRL_HSS_DISABLE | + COH901318_CX_CTRL_DDMA_LEGACY, + .param.ctrl_lli = 0 | + COH901318_CX_CTRL_TC_ENABLE | + COH901318_CX_CTRL_MASTER_MODE_M1RW | + COH901318_CX_CTRL_TCP_ENABLE | + COH901318_CX_CTRL_TC_IRQ_ENABLE | + COH901318_CX_CTRL_HSP_ENABLE | + COH901318_CX_CTRL_HSS_DISABLE | + COH901318_CX_CTRL_DDMA_LEGACY, + .param.ctrl_lli_last = 0 | + COH901318_CX_CTRL_TC_ENABLE | + COH901318_CX_CTRL_MASTER_MODE_M1RW | + COH901318_CX_CTRL_TCP_ENABLE | + COH901318_CX_CTRL_TC_IRQ_ENABLE | + COH901318_CX_CTRL_HSP_ENABLE | + COH901318_CX_CTRL_HSS_DISABLE | + COH901318_CX_CTRL_DDMA_LEGACY, }, { .number = U300_DMA_APEX_TX, @@ -1080,7 +1157,7 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | COH901318_CX_CTRL_MASTER_MODE_M1RW | COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | + COH901318_CX_CTRL_TC_IRQ_DISABLE | COH901318_CX_CTRL_HSP_ENABLE | COH901318_CX_CTRL_HSS_DISABLE | COH901318_CX_CTRL_DDMA_LEGACY | @@ -1252,15 +1329,77 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .name = "XGAM PDI", .priority_high = 0, }, + /* + * Don't set up device address, burst count or size of src + * or dst bus for this peripheral - handled by PrimeCell + * DMA extension. + */ { .number = U300_DMA_SPI_TX, .name = "SPI TX", .priority_high = 0, + .param.config = COH901318_CX_CFG_CH_DISABLE | + COH901318_CX_CFG_LCR_DISABLE | + COH901318_CX_CFG_TC_IRQ_ENABLE | + COH901318_CX_CFG_BE_IRQ_ENABLE, + .param.ctrl_lli_chained = 0 | + COH901318_CX_CTRL_TC_ENABLE | + COH901318_CX_CTRL_MASTER_MODE_M1RW | + COH901318_CX_CTRL_TCP_DISABLE | + COH901318_CX_CTRL_TC_IRQ_DISABLE | + COH901318_CX_CTRL_HSP_ENABLE | + COH901318_CX_CTRL_HSS_DISABLE | + COH901318_CX_CTRL_DDMA_LEGACY, + .param.ctrl_lli = 0 | + COH901318_CX_CTRL_TC_ENABLE | + COH901318_CX_CTRL_MASTER_MODE_M1RW | + COH901318_CX_CTRL_TCP_DISABLE | + COH901318_CX_CTRL_TC_IRQ_ENABLE | + COH901318_CX_CTRL_HSP_ENABLE | + COH901318_CX_CTRL_HSS_DISABLE | + COH901318_CX_CTRL_DDMA_LEGACY, + .param.ctrl_lli_last = 0 | + COH901318_CX_CTRL_TC_ENABLE | + COH901318_CX_CTRL_MASTER_MODE_M1RW | + COH901318_CX_CTRL_TCP_DISABLE | + COH901318_CX_CTRL_TC_IRQ_ENABLE | + COH901318_CX_CTRL_HSP_ENABLE | + COH901318_CX_CTRL_HSS_DISABLE | + COH901318_CX_CTRL_DDMA_LEGACY, }, { .number = U300_DMA_SPI_RX, .name = "SPI RX", .priority_high = 0, + .param.config = COH901318_CX_CFG_CH_DISABLE | + COH901318_CX_CFG_LCR_DISABLE | + COH901318_CX_CFG_TC_IRQ_ENABLE | + COH901318_CX_CFG_BE_IRQ_ENABLE, + .param.ctrl_lli_chained = 0 | + COH901318_CX_CTRL_TC_ENABLE | + COH901318_CX_CTRL_MASTER_MODE_M1RW | + COH901318_CX_CTRL_TCP_DISABLE | + COH901318_CX_CTRL_TC_IRQ_DISABLE | + COH901318_CX_CTRL_HSP_ENABLE | + COH901318_CX_CTRL_HSS_DISABLE | + COH901318_CX_CTRL_DDMA_LEGACY, + .param.ctrl_lli = 0 | + COH901318_CX_CTRL_TC_ENABLE | + COH901318_CX_CTRL_MASTER_MODE_M1RW | + COH901318_CX_CTRL_TCP_DISABLE | + COH901318_CX_CTRL_TC_IRQ_ENABLE | + COH901318_CX_CTRL_HSP_ENABLE | + COH901318_CX_CTRL_HSS_DISABLE | + COH901318_CX_CTRL_DDMA_LEGACY, + .param.ctrl_lli_last = 0 | + COH901318_CX_CTRL_TC_ENABLE | + COH901318_CX_CTRL_MASTER_MODE_M1RW | + COH901318_CX_CTRL_TCP_DISABLE | + COH901318_CX_CTRL_TC_IRQ_ENABLE | + COH901318_CX_CTRL_HSP_ENABLE | + COH901318_CX_CTRL_HSS_DISABLE | + COH901318_CX_CTRL_DDMA_LEGACY, + }, { .number = U300_DMA_GENERAL_PURPOSE_0, @@ -1617,7 +1756,7 @@ static void __init u300_init_check_chip(void) #endif #ifdef CONFIG_MACH_U300_BS335 if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) { - printk(KERN_ERR "Platform configured for BS365 " \ + printk(KERN_ERR "Platform configured for BS335 " \ " with DB3350 but %s detected, expect problems!", chipname); } @@ -1692,12 +1831,12 @@ void __init u300_init_devices(void) /* Register subdevices on the I2C buses */ u300_i2c_register_board_devices(); - /* Register subdevices on the SPI bus */ - u300_spi_register_board_devices(); - /* Register the platform devices */ platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); + /* Register subdevices on the SPI bus */ + u300_spi_register_board_devices(); + #ifndef CONFIG_MACH_U300_SEMI_IS_SHARED /* * Enable SEMI self refresh. Self-refresh of the SDRAM is entered when diff --git a/arch/arm/mach-u300/include/mach/coh901318.h b/arch/arm/mach-u300/include/mach/coh901318.h index 6193aaa4779..7c3b2b2d25b 100644 --- a/arch/arm/mach-u300/include/mach/coh901318.h +++ b/arch/arm/mach-u300/include/mach/coh901318.h @@ -102,6 +102,7 @@ struct coh901318_platform { const int max_channels; }; +#ifdef CONFIG_COH901318 /** * coh901318_filter_id() - DMA channel filter function * @chan: dma channel handle @@ -110,6 +111,12 @@ struct coh901318_platform { * In dma_request_channel() it specifies what channel id to be requested */ bool coh901318_filter_id(struct dma_chan *chan, void *chan_id); +#else +static inline bool coh901318_filter_id(struct dma_chan *chan, void *chan_id) +{ + return false; +} +#endif /* * DMA Controller - this access the static mappings of the coh901318 dma. diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c index de1ac9ad221..677ccef5cd3 100644 --- a/arch/arm/mach-u300/mmc.c +++ b/arch/arm/mach-u300/mmc.c @@ -3,159 +3,52 @@ * arch/arm/mach-u300/mmc.c * * - * Copyright (C) 2009 ST-Ericsson AB + * Copyright (C) 2009 ST-Ericsson SA * License terms: GNU General Public License (GPL) version 2 * * Author: Linus Walleij <linus.walleij@stericsson.com> - * Author: Johan Lundin <johan.lundin@stericsson.com> + * Author: Johan Lundin * Author: Jonas Aaberg <jonas.aberg@stericsson.com> */ #include <linux/device.h> #include <linux/amba/bus.h> #include <linux/mmc/host.h> -#include <linux/input.h> -#include <linux/workqueue.h> -#include <linux/delay.h> -#include <linux/regulator/consumer.h> -#include <linux/regulator/machine.h> #include <linux/gpio.h> +#include <linux/dmaengine.h> #include <linux/amba/mmci.h> #include <linux/slab.h> +#include <mach/coh901318.h> +#include <mach/dma_channels.h> #include "mmc.h" #include "padmux.h" -struct mmci_card_event { - struct input_dev *mmc_input; - int mmc_inserted; - struct work_struct workq; - struct mmci_platform_data mmc0_plat_data; +static struct mmci_platform_data mmc0_plat_data = { + /* + * Do not set ocr_mask or voltage translation function, + * we have a regulator we can control instead. + */ + /* Nominally 2.85V on our platform */ + .f_max = 24000000, + .gpio_wp = -1, + .gpio_cd = U300_GPIO_PIN_MMC_CD, + .cd_invert = true, + .capabilities = MMC_CAP_MMC_HIGHSPEED | + MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, +#ifdef CONFIG_COH901318 + .dma_filter = coh901318_filter_id, + .dma_rx_param = (void *) U300_DMA_MMCSD_RX_TX, + /* Don't specify a TX channel, this RX channel is bidirectional */ +#endif }; -static unsigned int mmc_status(struct device *dev) -{ - struct mmci_card_event *mmci_card = container_of( - dev->platform_data, - struct mmci_card_event, mmc0_plat_data); - - return mmci_card->mmc_inserted; -} - -static int mmci_callback(void *data) -{ - struct mmci_card_event *mmci_card = data; - - disable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD); - schedule_work(&mmci_card->workq); - - return 0; -} - - -static ssize_t gpio_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct mmci_card_event *mmci_card = container_of( - dev->platform_data, - struct mmci_card_event, mmc0_plat_data); - - - return sprintf(buf, "%d\n", !mmci_card->mmc_inserted); -} - -static DEVICE_ATTR(mmc_inserted, S_IRUGO, gpio_show, NULL); - -static void _mmci_callback(struct work_struct *ws) -{ - - struct mmci_card_event *mmci_card = container_of( - ws, - struct mmci_card_event, workq); - - mdelay(20); - - mmci_card->mmc_inserted = !gpio_get_value(U300_GPIO_PIN_MMC_CD); - - input_report_switch(mmci_card->mmc_input, KEY_INSERT, - mmci_card->mmc_inserted); - input_sync(mmci_card->mmc_input); - - pr_debug("MMC/SD card was %s\n", - mmci_card->mmc_inserted ? "inserted" : "removed"); - - enable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD, mmci_card->mmc_inserted); -} - int __devinit mmc_init(struct amba_device *adev) { - struct mmci_card_event *mmci_card; struct device *mmcsd_device = &adev->dev; struct pmx *pmx; int ret = 0; - mmci_card = kzalloc(sizeof(struct mmci_card_event), GFP_KERNEL); - if (!mmci_card) - return -ENOMEM; - - /* - * Do not set ocr_mask or voltage translation function, - * we have a regulator we can control instead. - */ - /* Nominally 2.85V on our platform */ - mmci_card->mmc0_plat_data.f_max = 24000000; - mmci_card->mmc0_plat_data.status = mmc_status; - mmci_card->mmc0_plat_data.gpio_wp = -1; - mmci_card->mmc0_plat_data.gpio_cd = -1; - mmci_card->mmc0_plat_data.capabilities = MMC_CAP_MMC_HIGHSPEED | - MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA; - - mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data; - - INIT_WORK(&mmci_card->workq, _mmci_callback); - - ret = gpio_request(U300_GPIO_PIN_MMC_CD, "MMC card detection"); - if (ret) { - printk(KERN_CRIT "Could not allocate MMC card detection " \ - "GPIO pin\n"); - goto out; - } - - ret = gpio_direction_input(U300_GPIO_PIN_MMC_CD); - if (ret) { - printk(KERN_CRIT "Invalid GPIO pin requested\n"); - goto out; - } - - ret = sysfs_create_file(&mmcsd_device->kobj, - &dev_attr_mmc_inserted.attr); - if (ret) - goto out; - - mmci_card->mmc_input = input_allocate_device(); - if (!mmci_card->mmc_input) { - printk(KERN_CRIT "Could not allocate MMC input device\n"); - return -ENOMEM; - } - - mmci_card->mmc_input->name = "MMC insert notification"; - mmci_card->mmc_input->id.bustype = BUS_HOST; - mmci_card->mmc_input->id.vendor = 0; - mmci_card->mmc_input->id.product = 0; - mmci_card->mmc_input->id.version = 0x0100; - mmci_card->mmc_input->dev.parent = mmcsd_device; - input_set_capability(mmci_card->mmc_input, EV_SW, KEY_INSERT); - - /* - * Since this must always be compiled into the kernel, this input - * is never unregistered or free:ed. - */ - ret = input_register_device(mmci_card->mmc_input); - if (ret) { - input_free_device(mmci_card->mmc_input); - goto out; - } - - input_set_drvdata(mmci_card->mmc_input, mmci_card); + mmcsd_device->platform_data = &mmc0_plat_data; /* * Setup padmuxing for MMC. Since this must always be @@ -171,12 +64,5 @@ int __devinit mmc_init(struct amba_device *adev) pr_warning("Could not activate padmuxing\n"); } - ret = gpio_register_callback(U300_GPIO_PIN_MMC_CD, mmci_callback, - mmci_card); - - schedule_work(&mmci_card->workq); - - printk(KERN_INFO "Registered MMC insert/remove notification\n"); -out: return ret; } diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c index 00869def542..5767208f1c1 100644 --- a/arch/arm/mach-u300/spi.c +++ b/arch/arm/mach-u300/spi.c @@ -11,6 +11,9 @@ #include <linux/spi/spi.h> #include <linux/amba/pl022.h> #include <linux/err.h> +#include <mach/coh901318.h> +#include <mach/dma_channels.h> + #include "padmux.h" /* @@ -30,11 +33,8 @@ static void select_dummy_chip(u32 chipselect) } struct pl022_config_chip dummy_chip_info = { - /* - * available POLLING_TRANSFER and INTERRUPT_TRANSFER, - * DMA_TRANSFER does not work - */ - .com_mode = INTERRUPT_TRANSFER, + /* available POLLING_TRANSFER, INTERRUPT_TRANSFER, DMA_TRANSFER */ + .com_mode = DMA_TRANSFER, .iface = SSP_INTERFACE_MOTOROLA_SPI, /* We can only act as master but SSP_SLAVE is possible in theory */ .hierarchy = SSP_MASTER, @@ -75,8 +75,6 @@ static struct spi_board_info u300_spi_devices[] = { static struct pl022_ssp_controller ssp_platform_data = { /* If you have several SPI buses this varies, we have only bus 0 */ .bus_id = 0, - /* Set this to 1 when we think we got DMA working */ - .enable_dma = 0, /* * On the APP CPU GPIO 4, 5 and 6 are connected as generic * chip selects for SPI. (Same on U330, U335 and U365.) @@ -84,6 +82,14 @@ static struct pl022_ssp_controller ssp_platform_data = { * and do padmuxing accordingly too. */ .num_chipselect = 3, +#ifdef CONFIG_COH901318 + .enable_dma = 1, + .dma_filter = coh901318_filter_id, + .dma_rx_param = (void *) U300_DMA_SPI_RX, + .dma_tx_param = (void *) U300_DMA_SPI_TX, +#else + .enable_dma = 0, +#endif }; @@ -109,6 +115,7 @@ void __init u300_spi_init(struct amba_device *adev) } } + void __init u300_spi_register_board_devices(void) { /* Register any SPI devices */ diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 53ebb429e97..b549a8fb423 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -3,16 +3,18 @@ # obj-y := clock.o cpu.o devices.o devices-common.o \ - id.o + id.o usb.o obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu.o obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \ - board-mop500-keypads.o + board-mop500-regulators.o \ + board-mop500-uib.o board-mop500-stuib.o \ + board-mop500-u8500uib.o \ + board-mop500-pins.o obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o -obj-$(CONFIG_REGULATOR_AB8500) += board-mop500-regulators.o obj-$(CONFIG_U5500_MODEM_IRQ) += modem-irq-db5500.o obj-$(CONFIG_U5500_MBOX) += mbox-db5500.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o diff --git a/arch/arm/mach-ux500/board-mop500-keypads.c b/arch/arm/mach-ux500/board-mop500-keypads.c deleted file mode 100644 index 70318c354d3..00000000000 --- a/arch/arm/mach-ux500/board-mop500-keypads.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License Terms: GNU General Public License v2 - * - * Keypad layouts for various boards - */ - -#include <linux/i2c.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/mfd/stmpe.h> -#include <linux/mfd/tc3589x.h> -#include <linux/input/matrix_keypad.h> - -#include <plat/pincfg.h> -#include <plat/ske.h> - -#include <mach/devices.h> -#include <mach/hardware.h> - -#include "devices-db8500.h" -#include "board-mop500.h" - -/* STMPE/SKE keypad use this key layout */ -static const unsigned int mop500_keymap[] = { - KEY(2, 5, KEY_END), - KEY(4, 1, KEY_POWER), - KEY(3, 5, KEY_VOLUMEDOWN), - KEY(1, 3, KEY_3), - KEY(5, 2, KEY_RIGHT), - KEY(5, 0, KEY_9), - - KEY(0, 5, KEY_MENU), - KEY(7, 6, KEY_ENTER), - KEY(4, 5, KEY_0), - KEY(6, 7, KEY_2), - KEY(3, 4, KEY_UP), - KEY(3, 3, KEY_DOWN), - - KEY(6, 4, KEY_SEND), - KEY(6, 2, KEY_BACK), - KEY(4, 2, KEY_VOLUMEUP), - KEY(5, 5, KEY_1), - KEY(4, 3, KEY_LEFT), - KEY(3, 2, KEY_7), -}; - -static const struct matrix_keymap_data mop500_keymap_data = { - .keymap = mop500_keymap, - .keymap_size = ARRAY_SIZE(mop500_keymap), -}; - -/* - * Nomadik SKE keypad - */ -#define ROW_PIN_I0 164 -#define ROW_PIN_I1 163 -#define ROW_PIN_I2 162 -#define ROW_PIN_I3 161 -#define ROW_PIN_I4 156 -#define ROW_PIN_I5 155 -#define ROW_PIN_I6 154 -#define ROW_PIN_I7 153 -#define COL_PIN_O0 168 -#define COL_PIN_O1 167 -#define COL_PIN_O2 166 -#define COL_PIN_O3 165 -#define COL_PIN_O4 160 -#define COL_PIN_O5 159 -#define COL_PIN_O6 158 -#define COL_PIN_O7 157 - -#define SKE_KPD_MAX_ROWS 8 -#define SKE_KPD_MAX_COLS 8 - -static int ske_kp_rows[] = { - ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3, - ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7, -}; - -/* - * ske_set_gpio_row: request and set gpio rows - */ -static int ske_set_gpio_row(int gpio) -{ - int ret; - - ret = gpio_request(gpio, "ske-kp"); - if (ret < 0) { - pr_err("ske_set_gpio_row: gpio request failed\n"); - return ret; - } - - ret = gpio_direction_output(gpio, 1); - if (ret < 0) { - pr_err("ske_set_gpio_row: gpio direction failed\n"); - gpio_free(gpio); - } - - return ret; -} - -/* - * ske_kp_init - enable the gpio configuration - */ -static int ske_kp_init(void) -{ - int ret, i; - - for (i = 0; i < SKE_KPD_MAX_ROWS; i++) { - ret = ske_set_gpio_row(ske_kp_rows[i]); - if (ret < 0) { - pr_err("ske_kp_init: failed init\n"); - return ret; - } - } - - return 0; -} - -static struct ske_keypad_platform_data ske_keypad_board = { - .init = ske_kp_init, - .keymap_data = &mop500_keymap_data, - .no_autorepeat = true, - .krow = SKE_KPD_MAX_ROWS, /* 8x8 matrix */ - .kcol = SKE_KPD_MAX_COLS, - .debounce_ms = 40, /* in millisecs */ -}; - -/* - * STMPE1601 - */ -static struct stmpe_keypad_platform_data stmpe1601_keypad_data = { - .debounce_ms = 64, - .scan_count = 8, - .no_autorepeat = true, - .keymap_data = &mop500_keymap_data, -}; - -static struct stmpe_platform_data stmpe1601_data = { - .id = 1, - .blocks = STMPE_BLOCK_KEYPAD, - .irq_trigger = IRQF_TRIGGER_FALLING, - .irq_base = MOP500_STMPE1601_IRQ(0), - .keypad = &stmpe1601_keypad_data, - .autosleep = true, - .autosleep_timeout = 1024, -}; - -static struct i2c_board_info mop500_i2c0_devices_stuib[] = { - { - I2C_BOARD_INFO("stmpe1601", 0x40), - .irq = NOMADIK_GPIO_TO_IRQ(218), - .platform_data = &stmpe1601_data, - .flags = I2C_CLIENT_WAKE, - }, -}; - -/* - * TC35893 - */ - -static const unsigned int uib_keymap[] = { - KEY(3, 1, KEY_END), - KEY(4, 1, KEY_POWER), - KEY(6, 4, KEY_VOLUMEDOWN), - KEY(4, 2, KEY_EMAIL), - KEY(3, 3, KEY_RIGHT), - KEY(2, 5, KEY_BACKSPACE), - - KEY(6, 7, KEY_MENU), - KEY(5, 0, KEY_ENTER), - KEY(4, 3, KEY_0), - KEY(3, 4, KEY_DOT), - KEY(5, 2, KEY_UP), - KEY(3, 5, KEY_DOWN), - - KEY(4, 5, KEY_SEND), - KEY(0, 5, KEY_BACK), - KEY(6, 2, KEY_VOLUMEUP), - KEY(1, 3, KEY_SPACE), - KEY(7, 6, KEY_LEFT), - KEY(5, 5, KEY_SEARCH), -}; - -static struct matrix_keymap_data uib_keymap_data = { - .keymap = uib_keymap, - .keymap_size = ARRAY_SIZE(uib_keymap), -}; - -static struct tc3589x_keypad_platform_data tc35893_data = { - .krow = TC_KPD_ROWS, - .kcol = TC_KPD_COLUMNS, - .debounce_period = TC_KPD_DEBOUNCE_PERIOD, - .settle_time = TC_KPD_SETTLE_TIME, - .irqtype = IRQF_TRIGGER_FALLING, - .enable_wakeup = true, - .keymap_data = &uib_keymap_data, - .no_autorepeat = true, -}; - -static struct tc3589x_platform_data tc3589x_keypad_data = { - .block = TC3589x_BLOCK_KEYPAD, - .keypad = &tc35893_data, - .irq_base = MOP500_EGPIO_IRQ_BASE, -}; - -static struct i2c_board_info mop500_i2c0_devices_uib[] = { - { - I2C_BOARD_INFO("tc3589x", 0x44), - .platform_data = &tc3589x_keypad_data, - .irq = NOMADIK_GPIO_TO_IRQ(218), - .flags = I2C_CLIENT_WAKE, - }, -}; - -void mop500_keypad_init(void) -{ - db8500_add_ske_keypad(&ske_keypad_board); - - i2c_register_board_info(0, mop500_i2c0_devices_stuib, - ARRAY_SIZE(mop500_i2c0_devices_stuib)); - - i2c_register_board_info(0, mop500_i2c0_devices_uib, - ARRAY_SIZE(mop500_i2c0_devices_uib)); - -} diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c new file mode 100644 index 00000000000..fd4cf1ca5ef --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -0,0 +1,241 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <plat/pincfg.h> +#include <mach/hardware.h> + +#include "pins-db8500.h" + +static pin_cfg_t mop500_pins_common[] = { + /* I2C */ + GPIO147_I2C0_SCL, + GPIO148_I2C0_SDA, + GPIO16_I2C1_SCL, + GPIO17_I2C1_SDA, + GPIO10_I2C2_SDA, + GPIO11_I2C2_SCL, + GPIO229_I2C3_SDA, + GPIO230_I2C3_SCL, + + /* MSP0 */ + GPIO12_MSP0_TXD, + GPIO13_MSP0_TFS, + GPIO14_MSP0_TCK, + GPIO15_MSP0_RXD, + + /* MSP2: HDMI */ + GPIO193_MSP2_TXD, + GPIO194_MSP2_TCK, + GPIO195_MSP2_TFS, + GPIO196_MSP2_RXD | PIN_OUTPUT_LOW, + + /* Touch screen INTERFACE */ + GPIO84_GPIO | PIN_INPUT_PULLUP, /* TOUCH_INT1 */ + + /* STMPE1601/tc35893 keypad IRQ */ + GPIO218_GPIO | PIN_INPUT_PULLUP, + + /* MMC0 (MicroSD card) */ + GPIO18_MC0_CMDDIR | PIN_OUTPUT_HIGH, + GPIO19_MC0_DAT0DIR | PIN_OUTPUT_HIGH, + GPIO20_MC0_DAT2DIR | PIN_OUTPUT_HIGH, + + GPIO22_MC0_FBCLK | PIN_INPUT_NOPULL, + GPIO23_MC0_CLK | PIN_OUTPUT_LOW, + GPIO24_MC0_CMD | PIN_INPUT_PULLUP, + GPIO25_MC0_DAT0 | PIN_INPUT_PULLUP, + GPIO26_MC0_DAT1 | PIN_INPUT_PULLUP, + GPIO27_MC0_DAT2 | PIN_INPUT_PULLUP, + GPIO28_MC0_DAT3 | PIN_INPUT_PULLUP, + + /* SDI1 (SDIO) */ + GPIO208_MC1_CLK | PIN_OUTPUT_LOW, + GPIO209_MC1_FBCLK | PIN_INPUT_NOPULL, + GPIO210_MC1_CMD | PIN_INPUT_PULLUP, + GPIO211_MC1_DAT0 | PIN_INPUT_PULLUP, + GPIO212_MC1_DAT1 | PIN_INPUT_PULLUP, + GPIO213_MC1_DAT2 | PIN_INPUT_PULLUP, + GPIO214_MC1_DAT3 | PIN_INPUT_PULLUP, + + /* MMC2 (On-board DATA INTERFACE eMMC) */ + GPIO128_MC2_CLK | PIN_OUTPUT_LOW, + GPIO129_MC2_CMD | PIN_INPUT_PULLUP, + GPIO130_MC2_FBCLK | PIN_INPUT_NOPULL, + GPIO131_MC2_DAT0 | PIN_INPUT_PULLUP, + GPIO132_MC2_DAT1 | PIN_INPUT_PULLUP, + GPIO133_MC2_DAT2 | PIN_INPUT_PULLUP, + GPIO134_MC2_DAT3 | PIN_INPUT_PULLUP, + GPIO135_MC2_DAT4 | PIN_INPUT_PULLUP, + GPIO136_MC2_DAT5 | PIN_INPUT_PULLUP, + GPIO137_MC2_DAT6 | PIN_INPUT_PULLUP, + GPIO138_MC2_DAT7 | PIN_INPUT_PULLUP, + + /* MMC4 (On-board STORAGE INTERFACE eMMC) */ + GPIO197_MC4_DAT3 | PIN_INPUT_PULLUP, + GPIO198_MC4_DAT2 | PIN_INPUT_PULLUP, + GPIO199_MC4_DAT1 | PIN_INPUT_PULLUP, + GPIO200_MC4_DAT0 | PIN_INPUT_PULLUP, + GPIO201_MC4_CMD | PIN_INPUT_PULLUP, + GPIO202_MC4_FBCLK | PIN_INPUT_NOPULL, + GPIO203_MC4_CLK | PIN_OUTPUT_LOW, + GPIO204_MC4_DAT7 | PIN_INPUT_PULLUP, + GPIO205_MC4_DAT6 | PIN_INPUT_PULLUP, + GPIO206_MC4_DAT5 | PIN_INPUT_PULLUP, + GPIO207_MC4_DAT4 | PIN_INPUT_PULLUP, + + /* SKE keypad */ + GPIO153_KP_I7, + GPIO154_KP_I6, + GPIO155_KP_I5, + GPIO156_KP_I4, + GPIO157_KP_O7, + GPIO158_KP_O6, + GPIO159_KP_O5, + GPIO160_KP_O4, + GPIO161_KP_I3, + GPIO162_KP_I2, + GPIO163_KP_I1, + GPIO164_KP_I0, + GPIO165_KP_O3, + GPIO166_KP_O2, + GPIO167_KP_O1, + GPIO168_KP_O0, + + /* UART */ + GPIO0_U0_CTSn | PIN_INPUT_PULLUP, + GPIO1_U0_RTSn | PIN_OUTPUT_HIGH, + GPIO2_U0_RXD | PIN_INPUT_PULLUP, + GPIO3_U0_TXD | PIN_OUTPUT_HIGH, + + GPIO29_U2_RXD | PIN_INPUT_PULLUP, + GPIO30_U2_TXD | PIN_OUTPUT_HIGH, + GPIO31_U2_CTSn | PIN_INPUT_PULLUP, + GPIO32_U2_RTSn | PIN_OUTPUT_HIGH, + + /* Display & HDMI HW sync */ + GPIO68_LCD_VSI0 | PIN_INPUT_PULLUP, + GPIO69_LCD_VSI1 | PIN_INPUT_PULLUP, +}; + +static pin_cfg_t mop500_pins_default[] = { + /* SSP0 */ + GPIO143_SSP0_CLK, + GPIO144_SSP0_FRM, + GPIO145_SSP0_RXD | PIN_PULL_DOWN, + GPIO146_SSP0_TXD, + + + GPIO217_GPIO | PIN_INPUT_PULLUP, /* TC35892 IRQ */ + + /* SDI0 (MicroSD card) */ + GPIO21_MC0_DAT31DIR | PIN_OUTPUT_HIGH, + + /* UART */ + GPIO4_U1_RXD | PIN_INPUT_PULLUP, + GPIO5_U1_TXD | PIN_OUTPUT_HIGH, + GPIO6_U1_CTSn | PIN_INPUT_PULLUP, + GPIO7_U1_RTSn | PIN_OUTPUT_HIGH, +}; + +static pin_cfg_t mop500_pins_hrefv60[] = { + /* WLAN */ + GPIO4_GPIO | PIN_INPUT_PULLUP,/* WLAN_IRQ */ + GPIO85_GPIO | PIN_OUTPUT_LOW,/* WLAN_ENA */ + + /* XENON Flashgun INTERFACE */ + GPIO6_IP_GPIO0 | PIN_INPUT_PULLUP,/* XENON_FLASH_ID */ + GPIO7_IP_GPIO1 | PIN_INPUT_PULLUP,/* XENON_READY */ + GPIO170_GPIO | PIN_OUTPUT_LOW, /* XENON_CHARGE */ + + /* Assistant LED INTERFACE */ + GPIO21_GPIO | PIN_OUTPUT_LOW, /* XENON_EN1 */ + GPIO64_IP_GPIO4 | PIN_OUTPUT_LOW, /* XENON_EN2 */ + + /* Magnetometer */ + GPIO31_GPIO | PIN_INPUT_PULLUP, /* magnetometer_INT */ + GPIO32_GPIO | PIN_INPUT_PULLDOWN, /* Magnetometer DRDY */ + + /* Display Interface */ + GPIO65_GPIO | PIN_OUTPUT_LOW, /* DISP1 RST */ + GPIO66_GPIO | PIN_OUTPUT_LOW, /* DISP2 RST */ + + /* Touch screen INTERFACE */ + GPIO143_GPIO | PIN_OUTPUT_LOW,/*TOUCH_RST1 */ + + /* Touch screen INTERFACE 2 */ + GPIO67_GPIO | PIN_INPUT_PULLUP, /* TOUCH_INT2 */ + GPIO146_GPIO | PIN_OUTPUT_LOW,/*TOUCH_RST2 */ + + /* ETM_PTM_TRACE INTERFACE */ + GPIO70_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA23 */ + GPIO71_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA22 */ + GPIO72_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA21 */ + GPIO73_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA20 */ + GPIO74_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA19 */ + + /* NAHJ INTERFACE */ + GPIO76_GPIO | PIN_OUTPUT_LOW,/* NAHJ_CTRL */ + GPIO216_GPIO | PIN_OUTPUT_HIGH,/* NAHJ_CTRL_INV */ + + /* NFC INTERFACE */ + GPIO77_GPIO | PIN_OUTPUT_LOW, /* NFC_ENA */ + GPIO144_GPIO | PIN_INPUT_PULLDOWN, /* NFC_IRQ */ + GPIO142_GPIO | PIN_OUTPUT_LOW, /* NFC_RESET */ + + /* Keyboard MATRIX INTERFACE */ + GPIO90_MC5_CMD | PIN_OUTPUT_LOW, /* KP_O_1 */ + GPIO87_MC5_DAT1 | PIN_OUTPUT_LOW, /* KP_O_2 */ + GPIO86_MC5_DAT0 | PIN_OUTPUT_LOW, /* KP_O_3 */ + GPIO96_KP_O6 | PIN_OUTPUT_LOW, /* KP_O_6 */ + GPIO94_KP_O7 | PIN_OUTPUT_LOW, /* KP_O_7 */ + GPIO93_MC5_DAT4 | PIN_INPUT_PULLUP, /* KP_I_0 */ + GPIO89_MC5_DAT3 | PIN_INPUT_PULLUP, /* KP_I_2 */ + GPIO88_MC5_DAT2 | PIN_INPUT_PULLUP, /* KP_I_3 */ + GPIO91_GPIO | PIN_INPUT_PULLUP, /* FORCE_SENSING_INT */ + GPIO92_GPIO | PIN_OUTPUT_LOW, /* FORCE_SENSING_RST */ + GPIO97_GPIO | PIN_OUTPUT_LOW, /* FORCE_SENSING_WU */ + + /* DiPro Sensor Interface */ + GPIO139_GPIO | PIN_INPUT_PULLUP, /* DIPRO_INT */ + + /* HAL SWITCH INTERFACE */ + GPIO145_GPIO | PIN_INPUT_PULLDOWN,/* HAL_SW */ + + /* Audio Amplifier Interface */ + GPIO149_GPIO | PIN_OUTPUT_LOW, /* VAUDIO_HF_EN */ + + /* GBF INTERFACE */ + GPIO171_GPIO | PIN_OUTPUT_LOW, /* GBF_ENA_RESET */ + + /* MSP : HDTV INTERFACE */ + GPIO192_GPIO | PIN_INPUT_PULLDOWN, + + /* ACCELEROMETER_INTERFACE */ + GPIO82_GPIO | PIN_INPUT_PULLUP, /* ACC_INT1 */ + GPIO83_GPIO | PIN_INPUT_PULLUP, /* ACC_INT2 */ + + /* Proximity Sensor */ + GPIO217_GPIO | PIN_INPUT_PULLUP, + + +}; + +void __init mop500_pins_init(void) +{ + nmk_config_pins(mop500_pins_common, + ARRAY_SIZE(mop500_pins_common)); + if (machine_is_hrefv60()) + nmk_config_pins(mop500_pins_hrefv60, + ARRAY_SIZE(mop500_pins_hrefv60)); + else + nmk_config_pins(mop500_pins_default, + ARRAY_SIZE(mop500_pins_default)); +} diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 533967c2d09..875c91b2f8a 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -11,6 +11,56 @@ #include <linux/kernel.h> #include <linux/regulator/machine.h> #include <linux/regulator/ab8500.h> +#include "board-mop500-regulators.h" + +static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { + /* External displays, connector on board 2v5 power supply */ + REGULATOR_SUPPLY("vaux12v5", "mcde.0"), + /* SFH7741 proximity sensor */ + REGULATOR_SUPPLY("vcc", "gpio-keys.0"), + /* BH1780GLS ambient light sensor */ + REGULATOR_SUPPLY("vcc", "2-0029"), + /* lsm303dlh accelerometer */ + REGULATOR_SUPPLY("vdd", "3-0018"), + /* lsm303dlh magnetometer */ + REGULATOR_SUPPLY("vdd", "3-001e"), + /* Rohm BU21013 Touchscreen devices */ + REGULATOR_SUPPLY("avdd", "3-005c"), + REGULATOR_SUPPLY("avdd", "3-005d"), + /* Synaptics RMI4 Touchscreen device */ + REGULATOR_SUPPLY("vdd", "3-004b"), +}; + +static struct regulator_consumer_supply ab8500_vaux2_consumers[] = { + /* On-board eMMC power */ + REGULATOR_SUPPLY("vmmc", "sdi4"), + /* AB8500 audio codec */ + REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"), +}; + +static struct regulator_consumer_supply ab8500_vaux3_consumers[] = { + /* External MMC slot power */ + REGULATOR_SUPPLY("vmmc", "sdi0"), +}; + +static struct regulator_consumer_supply ab8500_vtvout_consumers[] = { + /* TV-out DENC supply */ + REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"), + /* Internal general-purpose ADC */ + REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"), +}; + +static struct regulator_consumer_supply ab8500_vintcore_consumers[] = { + /* SoC core supply, no device */ + REGULATOR_SUPPLY("v-intcore", NULL), + /* USB Transciever */ + REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"), +}; + +static struct regulator_consumer_supply ab8500_vana_consumers[] = { + /* External displays, connector on board, 1v8 power supply */ + REGULATOR_SUPPLY("vsmps2", "mcde.0"), +}; /* AB8500 regulators */ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { @@ -23,6 +73,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), + .consumer_supplies = ab8500_vaux1_consumers, }, /* supplies to the on-board eMMC */ [AB8500_LDO_AUX2] = { @@ -33,6 +85,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers), + .consumer_supplies = ab8500_vaux2_consumers, }, /* supply for VAUX3, supplies to SDcard slots */ [AB8500_LDO_AUX3] = { @@ -43,6 +97,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers), + .consumer_supplies = ab8500_vaux3_consumers, }, /* supply for tvout, gpadc, TVOUT LDO */ [AB8500_LDO_TVOUT] = { @@ -50,6 +106,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .name = "V-TVOUT", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers), + .consumer_supplies = ab8500_vtvout_consumers, }, /* supply for ab8500-vaudio, VAUDIO LDO */ [AB8500_LDO_AUDIO] = { @@ -85,6 +143,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .name = "V-INTCORE", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers), + .consumer_supplies = ab8500_vintcore_consumers, }, /* supply for U8500 CSI/DSI, VANA LDO */ [AB8500_LDO_ANA] = { @@ -92,5 +152,7 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .name = "V-CSI/DSI", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers), + .consumer_supplies = ab8500_vana_consumers, }, }; diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 4b996676594..bf0b02414e5 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -12,56 +12,14 @@ #include <linux/mmc/host.h> #include <linux/platform_device.h> -#include <plat/pincfg.h> +#include <asm/mach-types.h> +#include <plat/ste_dma40.h> #include <mach/devices.h> #include <mach/hardware.h> #include "devices-db8500.h" -#include "pins-db8500.h" #include "board-mop500.h" - -static pin_cfg_t mop500_sdi_pins[] = { - /* SDI0 (MicroSD slot) */ - GPIO18_MC0_CMDDIR, - GPIO19_MC0_DAT0DIR, - GPIO20_MC0_DAT2DIR, - GPIO21_MC0_DAT31DIR, - GPIO22_MC0_FBCLK, - GPIO23_MC0_CLK, - GPIO24_MC0_CMD, - GPIO25_MC0_DAT0, - GPIO26_MC0_DAT1, - GPIO27_MC0_DAT2, - GPIO28_MC0_DAT3, - - /* SDI4 (on-board eMMC) */ - GPIO197_MC4_DAT3, - GPIO198_MC4_DAT2, - GPIO199_MC4_DAT1, - GPIO200_MC4_DAT0, - GPIO201_MC4_CMD, - GPIO202_MC4_FBCLK, - GPIO203_MC4_CLK, - GPIO204_MC4_DAT7, - GPIO205_MC4_DAT6, - GPIO206_MC4_DAT5, - GPIO207_MC4_DAT4, -}; - -static pin_cfg_t mop500_sdi2_pins[] = { - /* SDI2 (POP eMMC) */ - GPIO128_MC2_CLK, - GPIO129_MC2_CMD, - GPIO130_MC2_FBCLK, - GPIO131_MC2_DAT0, - GPIO132_MC2_DAT1, - GPIO133_MC2_DAT2, - GPIO134_MC2_DAT3, - GPIO135_MC2_DAT4, - GPIO136_MC2_DAT5, - GPIO137_MC2_DAT6, - GPIO138_MC2_DAT7, -}; +#include "ste-dma40-db8500.h" /* * SDI 0 (MicroSD slot) @@ -86,48 +44,134 @@ static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd, MCI_DATA2DIREN | MCI_DATA31DIREN; } +#ifdef CONFIG_STE_DMA40 +struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_PERIPH_TO_MEM, + .src_dev_type = DB8500_DMA_DEV29_SD_MM0_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, +}; + +static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_MEM_TO_PERIPH, + .src_dev_type = STEDMA40_DEV_SRC_MEMORY, + .dst_dev_type = DB8500_DMA_DEV29_SD_MM0_TX, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, +}; +#endif + static struct mmci_platform_data mop500_sdi0_data = { .vdd_handler = mop500_sdi0_vdd_handler, .ocr_mask = MMC_VDD_29_30, .f_max = 100000000, .capabilities = MMC_CAP_4_BIT_DATA, - .gpio_cd = GPIO_SDMMC_CD, .gpio_wp = -1, +#ifdef CONFIG_STE_DMA40 + .dma_filter = stedma40_filter, + .dma_rx_param = &mop500_sdi0_dma_cfg_rx, + .dma_tx_param = &mop500_sdi0_dma_cfg_tx, +#endif }; -void mop500_sdi_tc35892_init(void) +/* GPIO pins used by the sdi0 level shifter */ +static int sdi0_en = -1; +static int sdi0_vsel = -1; + +static void sdi0_configure(void) { int ret; - ret = gpio_request(GPIO_SDMMC_EN, "SDMMC_EN"); + ret = gpio_request(sdi0_en, "level shifter enable"); if (!ret) - ret = gpio_request(GPIO_SDMMC_1V8_3V_SEL, - "GPIO_SDMMC_1V8_3V_SEL"); - if (ret) + ret = gpio_request(sdi0_vsel, + "level shifter 1v8-3v select"); + + if (ret) { + pr_warning("unable to config sdi0 gpios for level shifter.\n"); return; + } - gpio_direction_output(GPIO_SDMMC_1V8_3V_SEL, 1); - gpio_direction_output(GPIO_SDMMC_EN, 0); + /* Select the default 2.9V and enable level shifter */ + gpio_direction_output(sdi0_vsel, 0); + gpio_direction_output(sdi0_en, 1); + /* Add the device */ db8500_add_sdi0(&mop500_sdi0_data); } +void mop500_sdi_tc35892_init(void) +{ + mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD; + sdi0_en = GPIO_SDMMC_EN; + sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL; + sdi0_configure(); +} + /* * SDI 2 (POP eMMC, not on DB8500ed) */ +#ifdef CONFIG_STE_DMA40 +struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_PERIPH_TO_MEM, + .src_dev_type = DB8500_DMA_DEV28_SD_MM2_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, +}; + +static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_MEM_TO_PERIPH, + .src_dev_type = STEDMA40_DEV_SRC_MEMORY, + .dst_dev_type = DB8500_DMA_DEV28_SD_MM2_TX, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, +}; +#endif + static struct mmci_platform_data mop500_sdi2_data = { .ocr_mask = MMC_VDD_165_195, .f_max = 100000000, .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_cd = -1, .gpio_wp = -1, +#ifdef CONFIG_STE_DMA40 + .dma_filter = stedma40_filter, + .dma_rx_param = &mop500_sdi2_dma_cfg_rx, + .dma_tx_param = &mop500_sdi2_dma_cfg_tx, +#endif }; /* * SDI 4 (on-board eMMC) */ +#ifdef CONFIG_STE_DMA40 +struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_PERIPH_TO_MEM, + .src_dev_type = DB8500_DMA_DEV42_SD_MM4_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, +}; + +static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_MEM_TO_PERIPH, + .src_dev_type = STEDMA40_DEV_SRC_MEMORY, + .dst_dev_type = DB8500_DMA_DEV42_SD_MM4_TX, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, +}; +#endif + static struct mmci_platform_data mop500_sdi4_data = { .ocr_mask = MMC_VDD_29_30, .f_max = 100000000, @@ -135,26 +179,32 @@ static struct mmci_platform_data mop500_sdi4_data = { MMC_CAP_MMC_HIGHSPEED, .gpio_cd = -1, .gpio_wp = -1, +#ifdef CONFIG_STE_DMA40 + .dma_filter = stedma40_filter, + .dma_rx_param = &mop500_sdi4_dma_cfg_rx, + .dma_tx_param = &mop500_sdi4_dma_cfg_tx, +#endif }; void __init mop500_sdi_init(void) { - nmk_config_pins(mop500_sdi_pins, ARRAY_SIZE(mop500_sdi_pins)); + /* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */ + if (!cpu_is_u8500v10()) + mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED; + db8500_add_sdi2(&mop500_sdi2_data); + + /* On-board eMMC */ + db8500_add_sdi4(&mop500_sdi4_data); + if (machine_is_hrefv60()) { + mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; + sdi0_en = HREFV60_SDMMC_EN_GPIO; + sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; + sdi0_configure(); + } /* - * sdi0 will finally be added when the TC35892 initializes and calls + * On boards with the TC35892 GPIO expander, sdi0 will finally + * be added when the TC35892 initializes and calls * mop500_sdi_tc35892_init() above. */ - - /* PoP:ed eMMC */ - if (!cpu_is_u8500ed()) { - nmk_config_pins(mop500_sdi2_pins, ARRAY_SIZE(mop500_sdi2_pins)); - /* POP eMMC on v1.0 has problems with high speed */ - if (!cpu_is_u8500v10()) - mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED; - db8500_add_sdi2(&mop500_sdi2_data); - } - - /* On-board eMMC */ - db8500_add_sdi4(&mop500_sdi4_data); } diff --git a/arch/arm/mach-ux500/board-mop500-stuib.c b/arch/arm/mach-ux500/board-mop500-stuib.c new file mode 100644 index 00000000000..8c979770d87 --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500-stuib.c @@ -0,0 +1,205 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL), version 2 + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mfd/stmpe.h> +#include <linux/input/bu21013.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/input/matrix_keypad.h> +#include <asm/mach-types.h> + +#include "board-mop500.h" + +/* STMPE/SKE keypad use this key layout */ +static const unsigned int mop500_keymap[] = { + KEY(2, 5, KEY_END), + KEY(4, 1, KEY_POWER), + KEY(3, 5, KEY_VOLUMEDOWN), + KEY(1, 3, KEY_3), + KEY(5, 2, KEY_RIGHT), + KEY(5, 0, KEY_9), + + KEY(0, 5, KEY_MENU), + KEY(7, 6, KEY_ENTER), + KEY(4, 5, KEY_0), + KEY(6, 7, KEY_2), + KEY(3, 4, KEY_UP), + KEY(3, 3, KEY_DOWN), + + KEY(6, 4, KEY_SEND), + KEY(6, 2, KEY_BACK), + KEY(4, 2, KEY_VOLUMEUP), + KEY(5, 5, KEY_1), + KEY(4, 3, KEY_LEFT), + KEY(3, 2, KEY_7), +}; + +static const struct matrix_keymap_data mop500_keymap_data = { + .keymap = mop500_keymap, + .keymap_size = ARRAY_SIZE(mop500_keymap), +}; +/* + * STMPE1601 + */ +static struct stmpe_keypad_platform_data stmpe1601_keypad_data = { + .debounce_ms = 64, + .scan_count = 8, + .no_autorepeat = true, + .keymap_data = &mop500_keymap_data, +}; + +static struct stmpe_platform_data stmpe1601_data = { + .id = 1, + .blocks = STMPE_BLOCK_KEYPAD, + .irq_trigger = IRQF_TRIGGER_FALLING, + .irq_base = MOP500_STMPE1601_IRQ(0), + .keypad = &stmpe1601_keypad_data, + .autosleep = true, + .autosleep_timeout = 1024, +}; + +static struct i2c_board_info __initdata mop500_i2c0_devices_stuib[] = { + { + I2C_BOARD_INFO("stmpe1601", 0x40), + .irq = NOMADIK_GPIO_TO_IRQ(218), + .platform_data = &stmpe1601_data, + .flags = I2C_CLIENT_WAKE, + }, +}; + +/* + * BU21013 ROHM touchscreen interface on the STUIBs + */ + +/* tracks number of bu21013 devices being enabled */ +static int bu21013_devices; + +#define TOUCH_GPIO_PIN 84 + +#define TOUCH_XMAX 384 +#define TOUCH_YMAX 704 + +#define PRCMU_CLOCK_OCR 0x1CC +#define TSC_EXT_CLOCK_9_6MHZ 0x840000 + +/** + * bu21013_gpio_board_init : configures the touch panel. + * @reset_pin: reset pin number + * This function can be used to configures + * the voltage and reset the touch panel controller. + */ +static int bu21013_gpio_board_init(int reset_pin) +{ + int retval = 0; + + bu21013_devices++; + if (bu21013_devices == 1) { + retval = gpio_request(reset_pin, "touchp_reset"); + if (retval) { + printk(KERN_ERR "Unable to request gpio reset_pin"); + return retval; + } + retval = gpio_direction_output(reset_pin, 1); + if (retval < 0) { + printk(KERN_ERR "%s: gpio direction failed\n", + __func__); + return retval; + } + } + + return retval; +} + +/** + * bu21013_gpio_board_exit : deconfigures the touch panel controller + * @reset_pin: reset pin number + * This function can be used to deconfigures the chip selection + * for touch panel controller. + */ +static int bu21013_gpio_board_exit(int reset_pin) +{ + int retval = 0; + + if (bu21013_devices == 1) { + retval = gpio_direction_output(reset_pin, 0); + if (retval < 0) { + printk(KERN_ERR "%s: gpio direction failed\n", + __func__); + return retval; + } + gpio_set_value(reset_pin, 0); + } + bu21013_devices--; + + return retval; +} + +/** + * bu21013_read_pin_val : get the interrupt pin value + * This function can be used to get the interrupt pin value for touch panel + * controller. + */ +static int bu21013_read_pin_val(void) +{ + return gpio_get_value(TOUCH_GPIO_PIN); +} + +static struct bu21013_platform_device tsc_plat_device = { + .cs_en = bu21013_gpio_board_init, + .cs_dis = bu21013_gpio_board_exit, + .irq_read_val = bu21013_read_pin_val, + .irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN), + .touch_x_max = TOUCH_XMAX, + .touch_y_max = TOUCH_YMAX, + .ext_clk = false, + .x_flip = false, + .y_flip = true, +}; + +static struct bu21013_platform_device tsc_plat2_device = { + .cs_en = bu21013_gpio_board_init, + .cs_dis = bu21013_gpio_board_exit, + .irq_read_val = bu21013_read_pin_val, + .irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN), + .touch_x_max = TOUCH_XMAX, + .touch_y_max = TOUCH_YMAX, + .ext_clk = false, + .x_flip = false, + .y_flip = true, +}; + +static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = { + { + I2C_BOARD_INFO("bu21013_tp", 0x5C), + .platform_data = &tsc_plat_device, + }, + { + I2C_BOARD_INFO("bu21013_tp", 0x5D), + .platform_data = &tsc_plat2_device, + }, + +}; + +void __init mop500_stuib_init(void) +{ + if (machine_is_hrefv60()) { + tsc_plat_device.cs_pin = HREFV60_TOUCH_RST_GPIO; + tsc_plat2_device.cs_pin = HREFV60_TOUCH_RST_GPIO; + } else { + tsc_plat_device.cs_pin = GPIO_BU21013_CS; + tsc_plat2_device.cs_pin = GPIO_BU21013_CS; + + } + + mop500_uib_i2c_add(0, mop500_i2c0_devices_stuib, + ARRAY_SIZE(mop500_i2c0_devices_stuib)); + + mop500_uib_i2c_add(3, u8500_i2c3_devices_stuib, + ARRAY_SIZE(u8500_i2c3_devices_stuib)); +} diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c new file mode 100644 index 00000000000..d8a8734a0eb --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500-u8500uib.c @@ -0,0 +1,111 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Board data for the U8500 UIB, also known as the New UIB + * License terms: GNU General Public License (GPL), version 2 + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/mfd/tc3589x.h> +#include <linux/input/matrix_keypad.h> +#include <../drivers/staging/ste_rmi4/synaptics_i2c_rmi4.h> + +#include <mach/gpio.h> +#include <mach/irqs.h> + +#include "board-mop500.h" + +/* + * Synaptics RMI4 touchscreen interface on the U8500 UIB + */ + +/* + * Descriptor structure. + * Describes the number of i2c devices on the bus that speak RMI. + */ +static struct synaptics_rmi4_platform_data rmi4_i2c_dev_platformdata = { + .irq_number = NOMADIK_GPIO_TO_IRQ(84), + .irq_type = (IRQF_TRIGGER_FALLING | IRQF_SHARED), + .x_flip = false, + .y_flip = true, + .regulator_en = false, +}; + +static struct i2c_board_info __initdata mop500_i2c3_devices_u8500[] = { + { + I2C_BOARD_INFO("synaptics_rmi4_i2c", 0x4B), + .platform_data = &rmi4_i2c_dev_platformdata, + }, +}; + +/* + * TC35893 + */ +static const unsigned int u8500_keymap[] = { + KEY(3, 1, KEY_END), + KEY(4, 1, KEY_POWER), + KEY(6, 4, KEY_VOLUMEDOWN), + KEY(4, 2, KEY_EMAIL), + KEY(3, 3, KEY_RIGHT), + KEY(2, 5, KEY_BACKSPACE), + + KEY(6, 7, KEY_MENU), + KEY(5, 0, KEY_ENTER), + KEY(4, 3, KEY_0), + KEY(3, 4, KEY_DOT), + KEY(5, 2, KEY_UP), + KEY(3, 5, KEY_DOWN), + + KEY(4, 5, KEY_SEND), + KEY(0, 5, KEY_BACK), + KEY(6, 2, KEY_VOLUMEUP), + KEY(1, 3, KEY_SPACE), + KEY(7, 6, KEY_LEFT), + KEY(5, 5, KEY_SEARCH), +}; + +static struct matrix_keymap_data u8500_keymap_data = { + .keymap = u8500_keymap, + .keymap_size = ARRAY_SIZE(u8500_keymap), +}; + +static struct tc3589x_keypad_platform_data tc35893_data = { + .krow = TC_KPD_ROWS, + .kcol = TC_KPD_COLUMNS, + .debounce_period = TC_KPD_DEBOUNCE_PERIOD, + .settle_time = TC_KPD_SETTLE_TIME, + .irqtype = IRQF_TRIGGER_FALLING, + .enable_wakeup = true, + .keymap_data = &u8500_keymap_data, + .no_autorepeat = true, +}; + +static struct tc3589x_platform_data tc3589x_keypad_data = { + .block = TC3589x_BLOCK_KEYPAD, + .keypad = &tc35893_data, + .irq_base = MOP500_EGPIO_IRQ_BASE, +}; + +static struct i2c_board_info __initdata mop500_i2c0_devices_u8500[] = { + { + I2C_BOARD_INFO("tc3589x", 0x44), + .platform_data = &tc3589x_keypad_data, + .irq = NOMADIK_GPIO_TO_IRQ(218), + .flags = I2C_CLIENT_WAKE, + }, +}; + + +void __init mop500_u8500uib_init(void) +{ + mop500_uib_i2c_add(3, mop500_i2c3_devices_u8500, + ARRAY_SIZE(mop500_i2c3_devices_u8500)); + + mop500_uib_i2c_add(0, mop500_i2c0_devices_u8500, + ARRAY_SIZE(mop500_i2c0_devices_u8500)); + +} diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c new file mode 100644 index 00000000000..69cce41f602 --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500-uib.c @@ -0,0 +1,135 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL), version 2 + */ + +#define pr_fmt(fmt) "mop500-uib: " fmt + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/i2c.h> + +#include <mach/hardware.h> +#include "board-mop500.h" + +enum mop500_uib { + STUIB, + U8500UIB, +}; + +struct uib { + const char *name; + const char *option; + void (*init)(void); +}; + +static struct __initdata uib mop500_uibs[] = { + [STUIB] = { + .name = "ST-UIB", + .option = "stuib", + .init = mop500_stuib_init, + }, + [U8500UIB] = { + .name = "U8500-UIB", + .option = "u8500uib", + .init = mop500_u8500uib_init, + }, +}; + +static struct uib *mop500_uib; + +static int __init mop500_uib_setup(char *str) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(mop500_uibs); i++) { + struct uib *uib = &mop500_uibs[i]; + + if (!strcmp(str, uib->option)) { + mop500_uib = uib; + break; + } + } + + if (i == ARRAY_SIZE(mop500_uibs)) + pr_err("invalid uib= option (%s)\n", str); + + return 1; +} +__setup("uib=", mop500_uib_setup); + +/* + * The UIBs are detected after the I2C host controllers are registered, so + * i2c_register_board_info() can't be used. + */ +void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, + unsigned n) +{ + struct i2c_adapter *adap; + struct i2c_client *client; + int i; + + adap = i2c_get_adapter(busnum); + if (!adap) { + pr_err("failed to get adapter i2c%d\n", busnum); + return; + } + + for (i = 0; i < n; i++) { + client = i2c_new_device(adap, &info[i]); + if (!client) + pr_err("failed to register %s to i2c%d\n", + info[i].type, busnum); + } + + i2c_put_adapter(adap); +} + +static void __init __mop500_uib_init(struct uib *uib, const char *why) +{ + pr_info("%s (%s)\n", uib->name, why); + uib->init(); +} + +/* + * Detect the UIB attached based on the presence or absence of i2c devices. + */ +static int __init mop500_uib_init(void) +{ + struct uib *uib = mop500_uib; + struct i2c_adapter *i2c0; + int ret; + + if (!cpu_is_u8500()) + return -ENODEV; + + if (uib) { + __mop500_uib_init(uib, "from uib= boot argument"); + return 0; + } + + i2c0 = i2c_get_adapter(0); + if (!i2c0) { + __mop500_uib_init(&mop500_uibs[STUIB], + "fallback, could not get i2c0"); + return -ENODEV; + } + + /* U8500-UIB has the TC35893 at 0x44 on I2C0, the ST-UIB doesn't. */ + ret = i2c_smbus_xfer(i2c0, 0x44, 0, I2C_SMBUS_WRITE, 0, + I2C_SMBUS_QUICK, NULL); + i2c_put_adapter(i2c0); + + if (ret == 0) + uib = &mop500_uibs[U8500UIB]; + else + uib = &mop500_uibs[STUIB]; + + __mop500_uib_init(uib, "detected"); + + return 0; +} + +module_init(mop500_uib_init); diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index a393f57ed2a..8790d984cac 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -17,68 +17,30 @@ #include <linux/gpio.h> #include <linux/amba/bus.h> #include <linux/amba/pl022.h> +#include <linux/amba/serial.h> #include <linux/spi/spi.h> #include <linux/mfd/ab8500.h> #include <linux/mfd/tc3589x.h> +#include <linux/leds-lp5521.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <plat/pincfg.h> #include <plat/i2c.h> +#include <plat/ste_dma40.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> #include <mach/irqs.h> +#include "ste-dma40-db8500.h" #include "devices-db8500.h" -#include "pins-db8500.h" #include "board-mop500.h" #include "board-mop500-regulators.h" -static pin_cfg_t mop500_pins[] = { - /* SSP0 */ - GPIO143_SSP0_CLK, - GPIO144_SSP0_FRM, - GPIO145_SSP0_RXD, - GPIO146_SSP0_TXD, - - /* I2C */ - GPIO147_I2C0_SCL, - GPIO148_I2C0_SDA, - GPIO16_I2C1_SCL, - GPIO17_I2C1_SDA, - GPIO10_I2C2_SDA, - GPIO11_I2C2_SCL, - GPIO229_I2C3_SDA, - GPIO230_I2C3_SCL, - - /* SKE keypad */ - GPIO153_KP_I7, - GPIO154_KP_I6, - GPIO155_KP_I5, - GPIO156_KP_I4, - GPIO157_KP_O7, - GPIO158_KP_O6, - GPIO159_KP_O5, - GPIO160_KP_O4, - GPIO161_KP_I3, - GPIO162_KP_I2, - GPIO163_KP_I1, - GPIO164_KP_I0, - GPIO165_KP_O3, - GPIO166_KP_O2, - GPIO167_KP_O1, - GPIO168_KP_O0, - - /* GPIO_EXP_INT */ - GPIO217_GPIO, - - /* STMPE1601 IRQ */ - GPIO218_GPIO | PIN_INPUT_PULLUP, -}; - static struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, .regulator = ab8500_regulators, @@ -103,16 +65,6 @@ struct platform_device ab8500_device = { .resource = ab8500_resources, }; -static struct pl022_ssp_controller ssp0_platform_data = { - .bus_id = 0, - /* pl022 not yet supports dma */ - .enable_dma = 0, - /* on this platform, gpio 31,142,144,214 & - * 224 are connected as chip selects - */ - .num_chipselect = 5, -}; - /* * TC35892 */ @@ -133,14 +85,81 @@ static struct tc3589x_platform_data mop500_tc35892_data = { .irq_base = MOP500_EGPIO_IRQ_BASE, }; +static struct lp5521_led_config lp5521_pri_led[] = { + [0] = { + .chan_nr = 0, + .led_current = 0x2f, + .max_current = 0x5f, + }, + [1] = { + .chan_nr = 1, + .led_current = 0x2f, + .max_current = 0x5f, + }, + [2] = { + .chan_nr = 2, + .led_current = 0x2f, + .max_current = 0x5f, + }, +}; + +static struct lp5521_platform_data __initdata lp5521_pri_data = { + .label = "lp5521_pri", + .led_config = &lp5521_pri_led[0], + .num_channels = 3, + .clock_mode = LP5521_CLOCK_EXT, +}; + +static struct lp5521_led_config lp5521_sec_led[] = { + [0] = { + .chan_nr = 0, + .led_current = 0x2f, + .max_current = 0x5f, + }, + [1] = { + .chan_nr = 1, + .led_current = 0x2f, + .max_current = 0x5f, + }, + [2] = { + .chan_nr = 2, + .led_current = 0x2f, + .max_current = 0x5f, + }, +}; + +static struct lp5521_platform_data __initdata lp5521_sec_data = { + .label = "lp5521_sec", + .led_config = &lp5521_sec_led[0], + .num_channels = 3, + .clock_mode = LP5521_CLOCK_EXT, +}; + static struct i2c_board_info mop500_i2c0_devices[] = { { I2C_BOARD_INFO("tc3589x", 0x42), - .irq = NOMADIK_GPIO_TO_IRQ(217), + .irq = NOMADIK_GPIO_TO_IRQ(217), .platform_data = &mop500_tc35892_data, }, }; +static struct i2c_board_info __initdata mop500_i2c2_devices[] = { + { + /* lp5521 LED driver, 1st device */ + I2C_BOARD_INFO("lp5521", 0x33), + .platform_data = &lp5521_pri_data, + }, + { + /* lp5521 LED driver, 2st device */ + I2C_BOARD_INFO("lp5521", 0x34), + .platform_data = &lp5521_sec_data, + }, + { + /* Light sensor Rohm BH1780GLI */ + I2C_BOARD_INFO("bh1780", 0x29), + }, +}; + #define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \ static struct nmk_i2c_controller u8500_i2c##id##_data = { \ /* \ @@ -178,8 +197,93 @@ static void __init mop500_i2c_init(void) db8500_add_i2c3(&u8500_i2c3_data); } +static struct gpio_keys_button mop500_gpio_keys[] = { + { + .desc = "SFH7741 Proximity Sensor", + .type = EV_SW, + .code = SW_FRONT_PROXIMITY, + .active_low = 0, + .can_disable = 1, + } +}; + +static struct regulator *prox_regulator; +static int mop500_prox_activate(struct device *dev); +static void mop500_prox_deactivate(struct device *dev); + +static struct gpio_keys_platform_data mop500_gpio_keys_data = { + .buttons = mop500_gpio_keys, + .nbuttons = ARRAY_SIZE(mop500_gpio_keys), + .enable = mop500_prox_activate, + .disable = mop500_prox_deactivate, +}; + +static struct platform_device mop500_gpio_keys_device = { + .name = "gpio-keys", + .id = 0, + .dev = { + .platform_data = &mop500_gpio_keys_data, + }, +}; + +static int mop500_prox_activate(struct device *dev) +{ + prox_regulator = regulator_get(&mop500_gpio_keys_device.dev, + "vcc"); + if (IS_ERR(prox_regulator)) { + dev_err(&mop500_gpio_keys_device.dev, + "no regulator\n"); + return PTR_ERR(prox_regulator); + } + regulator_enable(prox_regulator); + return 0; +} + +static void mop500_prox_deactivate(struct device *dev) +{ + regulator_disable(prox_regulator); + regulator_put(prox_regulator); +} + /* add any platform devices here - TODO */ static struct platform_device *platform_devs[] __initdata = { + &mop500_gpio_keys_device, +}; + +#ifdef CONFIG_STE_DMA40 +static struct stedma40_chan_cfg ssp0_dma_cfg_rx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_PERIPH_TO_MEM, + .src_dev_type = DB8500_DMA_DEV8_SSP0_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.data_width = STEDMA40_BYTE_WIDTH, +}; + +static struct stedma40_chan_cfg ssp0_dma_cfg_tx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_MEM_TO_PERIPH, + .src_dev_type = STEDMA40_DEV_SRC_MEMORY, + .dst_dev_type = DB8500_DMA_DEV8_SSP0_TX, + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.data_width = STEDMA40_BYTE_WIDTH, +}; +#endif + +static struct pl022_ssp_controller ssp0_platform_data = { + .bus_id = 0, +#ifdef CONFIG_STE_DMA40 + .enable_dma = 1, + .dma_filter = stedma40_filter, + .dma_rx_param = &ssp0_dma_cfg_rx, + .dma_tx_param = &ssp0_dma_cfg_tx, +#else + .enable_dma = 0, +#endif + /* on this platform, gpio 31,142,144,214 & + * 224 are connected as chip selects + */ + .num_chipselect = 5, }; static void __init mop500_spi_init(void) @@ -187,18 +291,108 @@ static void __init mop500_spi_init(void) db8500_add_ssp0(&ssp0_platform_data); } +#ifdef CONFIG_STE_DMA40 +static struct stedma40_chan_cfg uart0_dma_cfg_rx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_PERIPH_TO_MEM, + .src_dev_type = DB8500_DMA_DEV13_UART0_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.data_width = STEDMA40_BYTE_WIDTH, +}; + +static struct stedma40_chan_cfg uart0_dma_cfg_tx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_MEM_TO_PERIPH, + .src_dev_type = STEDMA40_DEV_SRC_MEMORY, + .dst_dev_type = DB8500_DMA_DEV13_UART0_TX, + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.data_width = STEDMA40_BYTE_WIDTH, +}; + +static struct stedma40_chan_cfg uart1_dma_cfg_rx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_PERIPH_TO_MEM, + .src_dev_type = DB8500_DMA_DEV12_UART1_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.data_width = STEDMA40_BYTE_WIDTH, +}; + +static struct stedma40_chan_cfg uart1_dma_cfg_tx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_MEM_TO_PERIPH, + .src_dev_type = STEDMA40_DEV_SRC_MEMORY, + .dst_dev_type = DB8500_DMA_DEV12_UART1_TX, + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.data_width = STEDMA40_BYTE_WIDTH, +}; + +static struct stedma40_chan_cfg uart2_dma_cfg_rx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_PERIPH_TO_MEM, + .src_dev_type = DB8500_DMA_DEV11_UART2_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.data_width = STEDMA40_BYTE_WIDTH, +}; + +static struct stedma40_chan_cfg uart2_dma_cfg_tx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_MEM_TO_PERIPH, + .src_dev_type = STEDMA40_DEV_SRC_MEMORY, + .dst_dev_type = DB8500_DMA_DEV11_UART2_TX, + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.data_width = STEDMA40_BYTE_WIDTH, +}; +#endif + +static struct amba_pl011_data uart0_plat = { +#ifdef CONFIG_STE_DMA40 + .dma_filter = stedma40_filter, + .dma_rx_param = &uart0_dma_cfg_rx, + .dma_tx_param = &uart0_dma_cfg_tx, +#endif +}; + +static struct amba_pl011_data uart1_plat = { +#ifdef CONFIG_STE_DMA40 + .dma_filter = stedma40_filter, + .dma_rx_param = &uart1_dma_cfg_rx, + .dma_tx_param = &uart1_dma_cfg_tx, +#endif +}; + +static struct amba_pl011_data uart2_plat = { +#ifdef CONFIG_STE_DMA40 + .dma_filter = stedma40_filter, + .dma_rx_param = &uart2_dma_cfg_rx, + .dma_tx_param = &uart2_dma_cfg_tx, +#endif +}; + static void __init mop500_uart_init(void) { - db8500_add_uart0(); - db8500_add_uart1(); - db8500_add_uart2(); + db8500_add_uart0(&uart0_plat); + db8500_add_uart1(&uart1_plat); + db8500_add_uart2(&uart2_plat); } -static void __init u8500_init_machine(void) +static void __init mop500_init_machine(void) { + /* + * The HREFv60 board removed a GPIO expander and routed + * all these GPIO pins to the internal GPIO controller + * instead. + */ + if (machine_is_hrefv60()) + mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; + else + mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + u8500_init_devices(); - nmk_config_pins(mop500_pins, ARRAY_SIZE(mop500_pins)); + mop500_pins_init(); platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); @@ -207,12 +401,12 @@ static void __init u8500_init_machine(void) mop500_spi_init(); mop500_uart_init(); - mop500_keypad_init(); - platform_device_register(&ab8500_device); i2c_register_board_info(0, mop500_i2c0_devices, ARRAY_SIZE(mop500_i2c0_devices)); + i2c_register_board_info(2, mop500_i2c2_devices, + ARRAY_SIZE(mop500_i2c2_devices)); } MACHINE_START(U8500, "ST-Ericsson MOP500 platform") @@ -222,5 +416,13 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform") .init_irq = ux500_init_irq, /* we re-use nomadik timer here */ .timer = &ux500_timer, - .init_machine = u8500_init_machine, + .init_machine = mop500_init_machine, +MACHINE_END + +MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") + .boot_params = 0x100, + .map_io = u8500_map_io, + .init_irq = ux500_init_irq, + .timer = &ux500_timer, + .init_machine = mop500_init_machine, MACHINE_END diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 3104ae2a02c..56722f4be71 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -7,15 +7,36 @@ #ifndef __BOARD_MOP500_H #define __BOARD_MOP500_H -#define MOP500_EGPIO(x) (NOMADIK_NR_GPIO + (x)) +/* HREFv60-specific GPIO assignments, this board has no GPIO expander */ +#define HREFV60_TOUCH_RST_GPIO 143 +#define HREFV60_PROX_SENSE_GPIO 217 +#define HREFV60_HAL_SW_GPIO 145 +#define HREFV60_SDMMC_EN_GPIO 169 +#define HREFV60_SDMMC_1V8_3V_GPIO 5 +#define HREFV60_SDMMC_CD_GPIO 95 +#define HREFV60_ACCEL_INT1_GPIO 82 +#define HREFV60_ACCEL_INT2_GPIO 83 +#define HREFV60_MAGNET_DRDY_GPIO 32 +#define HREFV60_DISP1_RST_GPIO 65 +#define HREFV60_DISP2_RST_GPIO 66 /* GPIOs on the TC35892 expander */ +#define MOP500_EGPIO(x) (NOMADIK_NR_GPIO + (x)) #define GPIO_SDMMC_CD MOP500_EGPIO(3) +#define GPIO_PROX_SENSOR MOP500_EGPIO(7) +#define GPIO_BU21013_CS MOP500_EGPIO(13) #define GPIO_SDMMC_EN MOP500_EGPIO(17) #define GPIO_SDMMC_1V8_3V_SEL MOP500_EGPIO(18) +struct i2c_board_info; + extern void mop500_sdi_init(void); extern void mop500_sdi_tc35892_init(void); -extern void mop500_keypad_init(void); +void __init mop500_u8500uib_init(void); +void __init mop500_stuib_init(void); +void __init mop500_pins_init(void); + +void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, + unsigned n); #endif diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c index 54712acc039..739fb4c5b16 100644 --- a/arch/arm/mach-ux500/board-u5500-sdi.c +++ b/arch/arm/mach-ux500/board-u5500-sdi.c @@ -31,6 +31,26 @@ static pin_cfg_t u5500_sdi_pins[] = { GPIO14_MC0_CLK | PIN_DIR_OUTPUT | PIN_VAL_LOW, }; +#ifdef CONFIG_STE_DMA40 +struct stedma40_chan_cfg u5500_sdi0_dma_cfg_rx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_PERIPH_TO_MEM, + .src_dev_type = DB5500_DMA_DEV24_SDMMC0_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, +}; + +static struct stedma40_chan_cfg u5500_sdi0_dma_cfg_tx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_MEM_TO_PERIPH, + .src_dev_type = STEDMA40_DEV_SRC_MEMORY, + .dst_dev_type = DB5500_DMA_DEV24_SDMMC0_TX, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, +}; +#endif + static struct mmci_platform_data u5500_sdi0_data = { .ocr_mask = MMC_VDD_165_195, .f_max = 50000000, @@ -39,6 +59,11 @@ static struct mmci_platform_data u5500_sdi0_data = { MMC_CAP_MMC_HIGHSPEED, .gpio_cd = -1, .gpio_wp = -1, +#ifdef CONFIG_STE_DMA40 + .dma_filter = stedma40_filter, + .dma_rx_param = &u5500_sdi0_dma_cfg_rx, + .dma_tx_param = &u5500_sdi0_dma_cfg_tx, +#endif }; void __init u5500_sdi_init(void) diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c index 39d370c1f3b..44fd3b5c33e 100644 --- a/arch/arm/mach-ux500/board-u5500.c +++ b/arch/arm/mach-ux500/board-u5500.c @@ -22,9 +22,9 @@ static void __init u5500_uart_init(void) { - db5500_add_uart0(); - db5500_add_uart1(); - db5500_add_uart2(); + db5500_add_uart0(NULL); + db5500_add_uart1(NULL); + db5500_add_uart2(NULL); } static void __init u5500_init_machine(void) diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index b2b0a3b9be8..32ce90840ee 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -313,7 +313,7 @@ static DEFINE_PRCMU_CLK_RATE(uartclk, 0x0, 5, UARTCLK, 38400000); static DEFINE_PRCMU_CLK(msp02clk, 0x0, 6, MSP02CLK); static DEFINE_PRCMU_CLK(msp1clk, 0x0, 7, MSP1CLK); /* v1 */ static DEFINE_PRCMU_CLK_RATE(i2cclk, 0x0, 8, I2CCLK, 48000000); -static DEFINE_PRCMU_CLK_RATE(sdmmcclk, 0x0, 9, SDMMCCLK, 50000000); +static DEFINE_PRCMU_CLK_RATE(sdmmcclk, 0x0, 9, SDMMCCLK, 100000000); static DEFINE_PRCMU_CLK(slimclk, 0x0, 10, SLIMCLK); static DEFINE_PRCMU_CLK(per1clk, 0x0, 11, PER1CLK); static DEFINE_PRCMU_CLK(per2clk, 0x0, 12, PER2CLK); @@ -520,7 +520,7 @@ static struct clk_lookup u8500_ed_clks[] = { CLK(ssp0_ed, "ssp0", NULL), /* Peripheral Cluster #5 */ - CLK(usb_ed, "musb_hdrc.0", "usb"), + CLK(usb_ed, "musb-ux500.0", "usb"), /* Peripheral Cluster #6 */ CLK(dmc_ed, "dmc", NULL), @@ -561,7 +561,7 @@ static struct clk_lookup u8500_v1_clks[] = { CLK(ssp0_v1, "ssp0", NULL), /* Peripheral Cluster #5 */ - CLK(usb_v1, "musb_hdrc.0", "usb"), + CLK(usb_v1, "musb-ux500.0", "usb"), /* Peripheral Cluster #6 */ CLK(mtu1_v1, "mtu1", NULL), diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c index af04e0891a7..c9dc2eff3cb 100644 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -11,6 +11,7 @@ #include <linux/irq.h> #include <asm/mach/map.h> +#include <asm/pmu.h> #include <plat/gpio.h> @@ -18,8 +19,10 @@ #include <mach/devices.h> #include <mach/setup.h> #include <mach/irqs.h> +#include <mach/usb.h> #include "devices-db5500.h" +#include "ste-dma40-db5500.h" static struct map_desc u5500_uart_io_desc[] __initdata = { __IO_DEV_DESC(U5500_UART0_BASE, SZ_4K), @@ -43,6 +46,26 @@ static struct map_desc u5500_io_desc[] __initdata = { __IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K), }; +static struct resource db5500_pmu_resources[] = { + [0] = { + .start = IRQ_DB5500_PMU0, + .end = IRQ_DB5500_PMU0, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = IRQ_DB5500_PMU1, + .end = IRQ_DB5500_PMU1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device db5500_pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .num_resources = ARRAY_SIZE(db5500_pmu_resources), + .resource = db5500_pmu_resources, +}; + static struct resource mbox0_resources[] = { { .name = "mbox_peer", @@ -127,7 +150,8 @@ static struct platform_device mbox2_device = { .num_resources = ARRAY_SIZE(mbox2_resources), }; -static struct platform_device *u5500_platform_devs[] __initdata = { +static struct platform_device *db5500_platform_devs[] __initdata = { + &db5500_pmu_device, &mbox0_device, &mbox1_device, &mbox2_device, @@ -166,12 +190,35 @@ void __init u5500_map_io(void) iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc)); } +static int usb_db5500_rx_dma_cfg[] = { + DB5500_DMA_DEV4_USB_OTG_IEP_1_9, + DB5500_DMA_DEV5_USB_OTG_IEP_2_10, + DB5500_DMA_DEV6_USB_OTG_IEP_3_11, + DB5500_DMA_DEV20_USB_OTG_IEP_4_12, + DB5500_DMA_DEV21_USB_OTG_IEP_5_13, + DB5500_DMA_DEV22_USB_OTG_IEP_6_14, + DB5500_DMA_DEV23_USB_OTG_IEP_7_15, + DB5500_DMA_DEV38_USB_OTG_IEP_8 +}; + +static int usb_db5500_tx_dma_cfg[] = { + DB5500_DMA_DEV4_USB_OTG_OEP_1_9, + DB5500_DMA_DEV5_USB_OTG_OEP_2_10, + DB5500_DMA_DEV6_USB_OTG_OEP_3_11, + DB5500_DMA_DEV20_USB_OTG_OEP_4_12, + DB5500_DMA_DEV21_USB_OTG_OEP_5_13, + DB5500_DMA_DEV22_USB_OTG_OEP_6_14, + DB5500_DMA_DEV23_USB_OTG_OEP_7_15, + DB5500_DMA_DEV38_USB_OTG_OEP_8 +}; + void __init u5500_init_devices(void) { db5500_add_gpios(); db5500_dma_init(); db5500_add_rtc(); + db5500_add_usb(usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg); - platform_add_devices(u5500_platform_devs, - ARRAY_SIZE(u5500_platform_devs)); + platform_add_devices(db5500_platform_devs, + ARRAY_SIZE(db5500_platform_devs)); } diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 1748fbc5853..516126cb357 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -12,21 +12,21 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/amba/bus.h> +#include <linux/interrupt.h> #include <linux/irq.h> #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/io.h> #include <asm/mach/map.h> +#include <asm/pmu.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> +#include <mach/usb.h> #include "devices-db8500.h" - -static struct platform_device *platform_devs[] __initdata = { - &u8500_dma40_device, -}; +#include "ste-dma40-db8500.h" /* minimum static i/o mapping required to boot U8500 platforms */ static struct map_desc u8500_uart_io_desc[] __initdata = { @@ -89,6 +89,51 @@ void __init u8500_map_io(void) iotable_init(u8500_v2_io_desc, ARRAY_SIZE(u8500_v2_io_desc)); } +static struct resource db8500_pmu_resources[] = { + [0] = { + .start = IRQ_DB8500_PMU, + .end = IRQ_DB8500_PMU, + .flags = IORESOURCE_IRQ, + }, +}; + +/* + * The PMU IRQ lines of two cores are wired together into a single interrupt. + * Bounce the interrupt to the other core if it's not ours. + */ +static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler) +{ + irqreturn_t ret = handler(irq, dev); + int other = !smp_processor_id(); + + if (ret == IRQ_NONE && cpu_online(other)) + irq_set_affinity(irq, cpumask_of(other)); + + /* + * We should be able to get away with the amount of IRQ_NONEs we give, + * while still having the spurious IRQ detection code kick in if the + * interrupt really starts hitting spuriously. + */ + return ret; +} + +static struct arm_pmu_platdata db8500_pmu_platdata = { + .handle_irq = db8500_pmu_handler, +}; + +static struct platform_device db8500_pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .num_resources = ARRAY_SIZE(db8500_pmu_resources), + .resource = db8500_pmu_resources, + .dev.platform_data = &db8500_pmu_platdata, +}; + +static struct platform_device *platform_devs[] __initdata = { + &u8500_dma40_device, + &db8500_pmu_device, +}; + static resource_size_t __initdata db8500_gpio_base[] = { U8500_GPIOBANK0_BASE, U8500_GPIOBANK1_BASE, @@ -111,6 +156,28 @@ static void __init db8500_add_gpios(void) IRQ_DB8500_GPIO0, &pdata); } +static int usb_db8500_rx_dma_cfg[] = { + DB8500_DMA_DEV38_USB_OTG_IEP_1_9, + DB8500_DMA_DEV37_USB_OTG_IEP_2_10, + DB8500_DMA_DEV36_USB_OTG_IEP_3_11, + DB8500_DMA_DEV19_USB_OTG_IEP_4_12, + DB8500_DMA_DEV18_USB_OTG_IEP_5_13, + DB8500_DMA_DEV17_USB_OTG_IEP_6_14, + DB8500_DMA_DEV16_USB_OTG_IEP_7_15, + DB8500_DMA_DEV39_USB_OTG_IEP_8 +}; + +static int usb_db8500_tx_dma_cfg[] = { + DB8500_DMA_DEV38_USB_OTG_OEP_1_9, + DB8500_DMA_DEV37_USB_OTG_OEP_2_10, + DB8500_DMA_DEV36_USB_OTG_OEP_3_11, + DB8500_DMA_DEV19_USB_OTG_OEP_4_12, + DB8500_DMA_DEV18_USB_OTG_OEP_5_13, + DB8500_DMA_DEV17_USB_OTG_OEP_6_14, + DB8500_DMA_DEV16_USB_OTG_OEP_7_15, + DB8500_DMA_DEV39_USB_OTG_OEP_8 +}; + /* * This function is called from the board init */ @@ -121,6 +188,7 @@ void __init u8500_init_devices(void) db8500_add_rtc(); db8500_add_gpios(); + db8500_add_usb(usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); platform_device_register_simple("cpufreq-u8500", -1, NULL, 0); platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c index fe69f5fac1b..13a4ce046ae 100644 --- a/arch/arm/mach-ux500/devices-common.c +++ b/arch/arm/mach-ux500/devices-common.c @@ -139,6 +139,7 @@ void dbx500_add_gpios(resource_size_t *base, int num, int irq, for (i = 0; i < num; i++, first += 32, irq++) { pdata->first_gpio = first; pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first); + pdata->num_gpio = 32; dbx500_add_gpio(i, base[i], irq, pdata); } diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h index cbadc117d2d..c719b5a1d91 100644 --- a/arch/arm/mach-ux500/devices-common.h +++ b/arch/arm/mach-ux500/devices-common.h @@ -42,10 +42,13 @@ dbx500_add_sdi(const char *name, resource_size_t base, int irq, return dbx500_add_amba_device(name, base, irq, pdata, 0); } +struct amba_pl011_data; + static inline struct amba_device * -dbx500_add_uart(const char *name, resource_size_t base, int irq) +dbx500_add_uart(const char *name, resource_size_t base, int irq, + struct amba_pl011_data *pdata) { - return dbx500_add_amba_device(name, base, irq, NULL, 0); + return dbx500_add_amba_device(name, base, irq, pdata, 0); } struct nmk_i2c_controller; diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h index c8d7901c1f2..94627f7783b 100644 --- a/arch/arm/mach-ux500/devices-db5500.h +++ b/arch/arm/mach-ux500/devices-db5500.h @@ -34,6 +34,9 @@ #define db5500_add_rtc() \ dbx500_add_rtc(U5500_RTC_BASE, IRQ_DB5500_RTC); +#define db5500_add_usb(rx_cfg, tx_cfg) \ + ux500_add_usb(U5500_USBOTG_BASE, IRQ_DB5500_USBOTG, rx_cfg, tx_cfg) + #define db5500_add_sdi0(pdata) \ dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata) #define db5500_add_sdi1(pdata) \ @@ -54,13 +57,13 @@ #define db5500_add_spi3(pdata) \ dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata) -#define db5500_add_uart0() \ - dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0) -#define db5500_add_uart1() \ - dbx500_add_uart("uart1", U5500_UART1_BASE, IRQ_DB5500_UART1) -#define db5500_add_uart2() \ - dbx500_add_uart("uart2", U5500_UART2_BASE, IRQ_DB5500_UART2) -#define db5500_add_uart3() \ - dbx500_add_uart("uart3", U5500_UART3_BASE, IRQ_DB5500_UART3) +#define db5500_add_uart0(plat) \ + dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0, plat) +#define db5500_add_uart1(plat) \ + dbx500_add_uart("uart1", U5500_UART1_BASE, IRQ_DB5500_UART1, plat) +#define db5500_add_uart2(plat) \ + dbx500_add_uart("uart2", U5500_UART2_BASE, IRQ_DB5500_UART2, plat) +#define db5500_add_uart3(plat) \ + dbx500_add_uart("uart3", U5500_UART3_BASE, IRQ_DB5500_UART3, plat) #endif diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index 23c695d5497..73b17404b19 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -11,6 +11,7 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/amba/bus.h> +#include <linux/amba/pl022.h> #include <plat/ste_dma40.h> @@ -67,12 +68,72 @@ struct stedma40_chan_cfg dma40_memcpy_conf_log = { /* * Mapping between destination event lines and physical device address. - * The event line is tied to a device and therefor the address is constant. + * The event line is tied to a device and therefore the address is constant. + * When the address comes from a primecell it will be configured in runtime + * and we set the address to -1 as a placeholder. */ -static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV]; +static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = { + /* MUSB - these will be runtime-reconfigured */ + [DB8500_DMA_DEV39_USB_OTG_OEP_8] = -1, + [DB8500_DMA_DEV16_USB_OTG_OEP_7_15] = -1, + [DB8500_DMA_DEV17_USB_OTG_OEP_6_14] = -1, + [DB8500_DMA_DEV18_USB_OTG_OEP_5_13] = -1, + [DB8500_DMA_DEV19_USB_OTG_OEP_4_12] = -1, + [DB8500_DMA_DEV36_USB_OTG_OEP_3_11] = -1, + [DB8500_DMA_DEV37_USB_OTG_OEP_2_10] = -1, + [DB8500_DMA_DEV38_USB_OTG_OEP_1_9] = -1, + /* PrimeCells - run-time configured */ + [DB8500_DMA_DEV0_SPI0_TX] = -1, + [DB8500_DMA_DEV1_SD_MMC0_TX] = -1, + [DB8500_DMA_DEV2_SD_MMC1_TX] = -1, + [DB8500_DMA_DEV3_SD_MMC2_TX] = -1, + [DB8500_DMA_DEV8_SSP0_TX] = -1, + [DB8500_DMA_DEV9_SSP1_TX] = -1, + [DB8500_DMA_DEV11_UART2_TX] = -1, + [DB8500_DMA_DEV12_UART1_TX] = -1, + [DB8500_DMA_DEV13_UART0_TX] = -1, + [DB8500_DMA_DEV28_SD_MM2_TX] = -1, + [DB8500_DMA_DEV29_SD_MM0_TX] = -1, + [DB8500_DMA_DEV32_SD_MM1_TX] = -1, + [DB8500_DMA_DEV33_SPI2_TX] = -1, + [DB8500_DMA_DEV35_SPI1_TX] = -1, + [DB8500_DMA_DEV40_SPI3_TX] = -1, + [DB8500_DMA_DEV41_SD_MM3_TX] = -1, + [DB8500_DMA_DEV42_SD_MM4_TX] = -1, + [DB8500_DMA_DEV43_SD_MM5_TX] = -1, +}; /* Mapping between source event lines and physical device address */ -static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV]; +static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = { + /* MUSB - these will be runtime-reconfigured */ + [DB8500_DMA_DEV39_USB_OTG_IEP_8] = -1, + [DB8500_DMA_DEV16_USB_OTG_IEP_7_15] = -1, + [DB8500_DMA_DEV17_USB_OTG_IEP_6_14] = -1, + [DB8500_DMA_DEV18_USB_OTG_IEP_5_13] = -1, + [DB8500_DMA_DEV19_USB_OTG_IEP_4_12] = -1, + [DB8500_DMA_DEV36_USB_OTG_IEP_3_11] = -1, + [DB8500_DMA_DEV37_USB_OTG_IEP_2_10] = -1, + [DB8500_DMA_DEV38_USB_OTG_IEP_1_9] = -1, + /* PrimeCells */ + [DB8500_DMA_DEV0_SPI0_RX] = -1, + [DB8500_DMA_DEV1_SD_MMC0_RX] = -1, + [DB8500_DMA_DEV2_SD_MMC1_RX] = -1, + [DB8500_DMA_DEV3_SD_MMC2_RX] = -1, + [DB8500_DMA_DEV8_SSP0_RX] = -1, + [DB8500_DMA_DEV9_SSP1_RX] = -1, + [DB8500_DMA_DEV11_UART2_RX] = -1, + [DB8500_DMA_DEV12_UART1_RX] = -1, + [DB8500_DMA_DEV13_UART0_RX] = -1, + [DB8500_DMA_DEV28_SD_MM2_RX] = -1, + [DB8500_DMA_DEV29_SD_MM0_RX] = -1, + [DB8500_DMA_DEV32_SD_MM1_RX] = -1, + [DB8500_DMA_DEV33_SPI2_RX] = -1, + [DB8500_DMA_DEV35_SPI1_RX] = -1, + [DB8500_DMA_DEV40_SPI3_RX] = -1, + [DB8500_DMA_DEV41_SD_MM3_RX] = -1, + [DB8500_DMA_DEV42_SD_MM4_RX] = -1, + [DB8500_DMA_DEV43_SD_MM5_RX] = -1, +}; /* Reserved event lines for memcpy only */ static int dma40_memcpy_event[] = { diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h index 3a770c75697..9cc6f8f5d3e 100644 --- a/arch/arm/mach-ux500/devices-db8500.h +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -61,6 +61,9 @@ db8500_add_ssp(const char *name, resource_size_t base, int irq, #define db8500_add_rtc() \ dbx500_add_rtc(U8500_RTC_BASE, IRQ_DB8500_RTC); +#define db8500_add_usb(rx_cfg, tx_cfg) \ + ux500_add_usb(U8500_USBOTG_BASE, IRQ_DB8500_USBOTG, rx_cfg, tx_cfg) + #define db8500_add_sdi0(pdata) \ dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata) #define db8500_add_sdi1(pdata) \ @@ -88,11 +91,11 @@ db8500_add_ssp(const char *name, resource_size_t base, int irq, #define db8500_add_spi3(pdata) \ dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata) -#define db8500_add_uart0() \ - dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0) -#define db8500_add_uart1() \ - dbx500_add_uart("uart1", U8500_UART1_BASE, IRQ_DB8500_UART1) -#define db8500_add_uart2() \ - dbx500_add_uart("uart2", U8500_UART2_BASE, IRQ_DB8500_UART2) +#define db8500_add_uart0(pdata) \ + dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0, pdata) +#define db8500_add_uart1(pdata) \ + dbx500_add_uart("uart1", U8500_UART1_BASE, IRQ_DB8500_UART1, pdata) +#define db8500_add_uart2(pdata) \ + dbx500_add_uart("uart2", U8500_UART2_BASE, IRQ_DB8500_UART2, pdata) #endif diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c index 32a061f8a95..1cfab68ae41 100644 --- a/arch/arm/mach-ux500/dma-db5500.c +++ b/arch/arm/mach-ux500/dma-db5500.c @@ -73,11 +73,27 @@ static struct stedma40_chan_cfg dma40_memcpy_conf_log = { */ static const dma_addr_t dma40_rx_map[DB5500_DMA_NR_DEV] = { [DB5500_DMA_DEV24_SDMMC0_RX] = -1, + [DB5500_DMA_DEV38_USB_OTG_IEP_8] = -1, + [DB5500_DMA_DEV23_USB_OTG_IEP_7_15] = -1, + [DB5500_DMA_DEV22_USB_OTG_IEP_6_14] = -1, + [DB5500_DMA_DEV21_USB_OTG_IEP_5_13] = -1, + [DB5500_DMA_DEV20_USB_OTG_IEP_4_12] = -1, + [DB5500_DMA_DEV6_USB_OTG_IEP_3_11] = -1, + [DB5500_DMA_DEV5_USB_OTG_IEP_2_10] = -1, + [DB5500_DMA_DEV4_USB_OTG_IEP_1_9] = -1, }; /* Mapping between destination event lines and physical device address */ static const dma_addr_t dma40_tx_map[DB5500_DMA_NR_DEV] = { [DB5500_DMA_DEV24_SDMMC0_TX] = -1, + [DB5500_DMA_DEV38_USB_OTG_OEP_8] = -1, + [DB5500_DMA_DEV23_USB_OTG_OEP_7_15] = -1, + [DB5500_DMA_DEV22_USB_OTG_OEP_6_14] = -1, + [DB5500_DMA_DEV21_USB_OTG_OEP_5_13] = -1, + [DB5500_DMA_DEV20_USB_OTG_OEP_4_12] = -1, + [DB5500_DMA_DEV6_USB_OTG_OEP_3_11] = -1, + [DB5500_DMA_DEV5_USB_OTG_OEP_2_10] = -1, + [DB5500_DMA_DEV4_USB_OTG_OEP_1_9] = -1, }; static int dma40_memcpy_event[] = { diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h index 9a6614c6808..ab0fe1432fa 100644 --- a/arch/arm/mach-ux500/include/mach/uncompress.h +++ b/arch/arm/mach-ux500/include/mach/uncompress.h @@ -50,7 +50,11 @@ static void flush(void) static inline void arch_decomp_setup(void) { - if (machine_is_u8500()) + /* Check in run time if we run on an U8500 or U5500 */ + if (machine_is_u8500() || + machine_is_svp8500v1() || + machine_is_svp8500v2() || + machine_is_hrefv60()) ux500_uart_base = U8500_UART2_BASE; else if (machine_is_u5500()) ux500_uart_base = U5500_UART0_BASE; diff --git a/arch/arm/mach-ux500/include/mach/usb.h b/arch/arm/mach-ux500/include/mach/usb.h new file mode 100644 index 00000000000..d3739d41881 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/usb.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) ST-Ericsson SA 2011 + * + * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef __ASM_ARCH_USB_H +#define __ASM_ARCH_USB_H + +#include <linux/dmaengine.h> + +#define UX500_MUSB_DMA_NUM_RX_CHANNELS 8 +#define UX500_MUSB_DMA_NUM_TX_CHANNELS 8 + +struct ux500_musb_board_data { + void **dma_rx_param_array; + void **dma_tx_param_array; + u32 num_rx_channels; + u32 num_tx_channels; + bool (*dma_filter)(struct dma_chan *chan, void *filter_param); +}; + +void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg, + int *dma_tx_cfg); +#endif diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c new file mode 100644 index 00000000000..82e535953fd --- /dev/null +++ b/arch/arm/mach-ux500/usb.c @@ -0,0 +1,160 @@ +/* + * Copyright (C) ST-Ericsson SA 2011 + * + * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> + * License terms: GNU General Public License (GPL) version 2 + */ +#include <linux/platform_device.h> +#include <linux/usb/musb.h> +#include <plat/ste_dma40.h> +#include <mach/hardware.h> +#include <mach/usb.h> + +#define MUSB_DMA40_RX_CH { \ + .mode = STEDMA40_MODE_LOGICAL, \ + .dir = STEDMA40_PERIPH_TO_MEM, \ + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, \ + .src_info.data_width = STEDMA40_WORD_WIDTH, \ + .dst_info.data_width = STEDMA40_WORD_WIDTH, \ + .src_info.psize = STEDMA40_PSIZE_LOG_16, \ + .dst_info.psize = STEDMA40_PSIZE_LOG_16, \ + } + +#define MUSB_DMA40_TX_CH { \ + .mode = STEDMA40_MODE_LOGICAL, \ + .dir = STEDMA40_MEM_TO_PERIPH, \ + .src_dev_type = STEDMA40_DEV_SRC_MEMORY, \ + .src_info.data_width = STEDMA40_WORD_WIDTH, \ + .dst_info.data_width = STEDMA40_WORD_WIDTH, \ + .src_info.psize = STEDMA40_PSIZE_LOG_16, \ + .dst_info.psize = STEDMA40_PSIZE_LOG_16, \ + } + +static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_CHANNELS] + = { + MUSB_DMA40_RX_CH, + MUSB_DMA40_RX_CH, + MUSB_DMA40_RX_CH, + MUSB_DMA40_RX_CH, + MUSB_DMA40_RX_CH, + MUSB_DMA40_RX_CH, + MUSB_DMA40_RX_CH, + MUSB_DMA40_RX_CH +}; + +static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_TX_CHANNELS] + = { + MUSB_DMA40_TX_CH, + MUSB_DMA40_TX_CH, + MUSB_DMA40_TX_CH, + MUSB_DMA40_TX_CH, + MUSB_DMA40_TX_CH, + MUSB_DMA40_TX_CH, + MUSB_DMA40_TX_CH, + MUSB_DMA40_TX_CH, +}; + +static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_CHANNELS] = { + &musb_dma_rx_ch[0], + &musb_dma_rx_ch[1], + &musb_dma_rx_ch[2], + &musb_dma_rx_ch[3], + &musb_dma_rx_ch[4], + &musb_dma_rx_ch[5], + &musb_dma_rx_ch[6], + &musb_dma_rx_ch[7] +}; + +static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_TX_CHANNELS] = { + &musb_dma_tx_ch[0], + &musb_dma_tx_ch[1], + &musb_dma_tx_ch[2], + &musb_dma_tx_ch[3], + &musb_dma_tx_ch[4], + &musb_dma_tx_ch[5], + &musb_dma_tx_ch[6], + &musb_dma_tx_ch[7] +}; + +static struct ux500_musb_board_data musb_board_data = { + .dma_rx_param_array = ux500_dma_rx_param_array, + .dma_tx_param_array = ux500_dma_tx_param_array, + .num_rx_channels = UX500_MUSB_DMA_NUM_RX_CHANNELS, + .num_tx_channels = UX500_MUSB_DMA_NUM_TX_CHANNELS, + .dma_filter = stedma40_filter, +}; + +static u64 ux500_musb_dmamask = DMA_BIT_MASK(32); + +static struct musb_hdrc_config musb_hdrc_config = { + .multipoint = true, + .dyn_fifo = true, + .num_eps = 16, + .ram_bits = 16, +}; + +static struct musb_hdrc_platform_data musb_platform_data = { +#if defined(CONFIG_USB_MUSB_OTG) + .mode = MUSB_OTG, +#elif defined(CONFIG_USB_MUSB_PERIPHERAL) + .mode = MUSB_PERIPHERAL, +#else /* defined(CONFIG_USB_MUSB_HOST) */ + .mode = MUSB_HOST, +#endif + .config = &musb_hdrc_config, + .board_data = &musb_board_data, +}; + +static struct resource usb_resources[] = { + [0] = { + .name = "usb-mem", + .flags = IORESOURCE_MEM, + }, + + [1] = { + .name = "mc", /* hard-coded in musb */ + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device ux500_musb_device = { + .name = "musb-ux500", + .id = 0, + .dev = { + .platform_data = &musb_platform_data, + .dma_mask = &ux500_musb_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(usb_resources), + .resource = usb_resources, +}; + +static inline void ux500_usb_dma_update_rx_ch_config(int *src_dev_type) +{ + u32 idx; + + for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_CHANNELS; idx++) + musb_dma_rx_ch[idx].src_dev_type = src_dev_type[idx]; +} + +static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type) +{ + u32 idx; + + for (idx = 0; idx < UX500_MUSB_DMA_NUM_TX_CHANNELS; idx++) + musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx]; +} + +void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg, + int *dma_tx_cfg) +{ + ux500_musb_device.resource[0].start = base; + ux500_musb_device.resource[0].end = base + SZ_64K - 1; + ux500_musb_device.resource[1].start = irq; + ux500_musb_device.resource[1].end = irq; + + ux500_usb_dma_update_rx_ch_config(dma_rx_cfg); + ux500_usb_dma_update_tx_ch_config(dma_tx_cfg); + + platform_device_register(&ux500_musb_device); +} diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 89266382b53..0074b8dba79 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -819,8 +819,8 @@ config CACHE_FEROCEON_L2_WRITETHROUGH config CACHE_L2X0 bool "Enable the L2x0 outer cache controller" depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \ - REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \ - ARCH_NOMADIK || ARCH_OMAP4 || ARCH_S5PV310 || ARCH_TEGRA || \ + REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \ + ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \ ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE default y select OUTER_CACHE diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 389f2179501..b0cb4258e38 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -33,6 +33,7 @@ config ARCH_MX3 config ARCH_MXC91231 bool "MXC91231-based" select CPU_V6 + select MXC_AVIC help This enables support for systems based on the Freescale MXC91231 family diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 5fd20e96876..a1387875a49 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o obj-$(CONFIG_MXC_PWM) += pwm.o -obj-$(CONFIG_USB_EHCI_MXC) += ehci.o obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_MXC_USE_EPIT) += epit.o obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c index e9bcefe79a4..eee1b6096a0 100644 --- a/arch/arm/plat-mxc/devices.c +++ b/arch/arm/plat-mxc/devices.c @@ -81,6 +81,8 @@ struct platform_device *__init imx_add_platform_device_dmamask( ret = platform_device_add(pdev); if (ret) { err: + if (dmamask) + kfree(pdev->dev.dma_mask); platform_device_put(pdev); return ERR_PTR(ret); } diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c index b50c3517d08..6561c9df5f0 100644 --- a/arch/arm/plat-mxc/devices/platform-fec.c +++ b/arch/arm/plat-mxc/devices/platform-fec.c @@ -31,6 +31,11 @@ const struct imx_fec_data imx35_fec_data __initconst = imx_fec_data_entry_single(MX35); #endif +#ifdef CONFIG_SOC_IMX50 +const struct imx_fec_data imx50_fec_data __initconst = + imx_fec_data_entry_single(MX50); +#endif + #ifdef CONFIG_SOC_IMX51 const struct imx_fec_data imx51_fec_data __initconst = imx_fec_data_entry_single(MX51); @@ -57,7 +62,7 @@ struct platform_device *__init imx_add_fec( }, }; - return imx_add_platform_device("fec", 0 /* -1? */, + return imx_add_platform_device_dmamask("fec", 0, res, ARRAY_SIZE(res), - pdata, sizeof(*pdata)); + pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c index 33530d2d5ed..3538b85ede9 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-dma.c +++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c @@ -94,7 +94,7 @@ static struct sdma_script_start_addrs addr_imx25_to1 = { }; #endif -#ifdef CONFIG_ARCH_MX31 +#ifdef CONFIG_SOC_IMX31 static struct sdma_script_start_addrs addr_imx31_to1 = { .per_2_per_addr = 1677, }; @@ -106,7 +106,7 @@ static struct sdma_script_start_addrs addr_imx31_to2 = { }; #endif -#ifdef CONFIG_ARCH_MX35 +#ifdef CONFIG_SOC_IMX35 static struct sdma_script_start_addrs addr_imx35_to1 = { .ap_2_ap_addr = 642, .uart_2_mcu_addr = 817, @@ -194,7 +194,7 @@ static int __init imxXX_add_imx_dma(void) } else #endif -#if defined(CONFIG_ARCH_MX51) +#if defined(CONFIG_SOC_IMX51) if (cpu_is_mx51()) { imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51_to1; ret = imx_add_imx_sdma(&imx51_imx_sdma_data); diff --git a/arch/arm/plat-mxc/devices/platform-imx-fb.c b/arch/arm/plat-mxc/devices/platform-imx-fb.c index 6100a7d824d..79a1cb18a5b 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-fb.c +++ b/arch/arm/plat-mxc/devices/platform-imx-fb.c @@ -16,6 +16,11 @@ .irq = soc ## _INT_LCDC, \ } +#ifdef CONFIG_SOC_IMX1 +const struct imx_imx_fb_data imx1_imx_fb_data __initconst = + imx_imx_fb_data_entry_single(MX1, SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX1 */ + #ifdef CONFIG_SOC_IMX21 const struct imx_imx_fb_data imx21_imx_fb_data __initconst = imx_imx_fb_data_entry_single(MX21, SZ_4K); diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c index 7ba94e1bbda..2ab74f0da9a 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-i2c.c +++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c @@ -69,6 +69,16 @@ const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX35 */ +#ifdef CONFIG_SOC_IMX50 +const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst = { +#define imx50_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX50, _id, _hwid, SZ_4K) + imx50_imx_i2c_data_entry(0, 1), + imx50_imx_i2c_data_entry(1, 2), + imx50_imx_i2c_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_SOC_IMX51 */ + #ifdef CONFIG_SOC_IMX51 const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = { #define imx51_imx_i2c_data_entry(_id, _hwid) \ diff --git a/arch/arm/plat-mxc/devices/platform-imx2-wdt.c b/arch/arm/plat-mxc/devices/platform-imx2-wdt.c index e0aec61177f..5e07ef2bf1c 100644 --- a/arch/arm/plat-mxc/devices/platform-imx2-wdt.c +++ b/arch/arm/plat-mxc/devices/platform-imx2-wdt.c @@ -53,6 +53,15 @@ const struct imx_imx2_wdt_data imx51_imx2_wdt_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX51 */ +#ifdef CONFIG_SOC_IMX53 +const struct imx_imx2_wdt_data imx53_imx2_wdt_data[] __initconst = { +#define imx53_imx2_wdt_data_entry(_id, _hwid) \ + imx_imx2_wdt_data_entry(MX53, _id, _hwid, SZ_16K) + imx53_imx2_wdt_data_entry(0, 1), + imx53_imx2_wdt_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX53 */ + struct platform_device *__init imx_add_imx2_wdt( const struct imx_imx2_wdt_data *data) { diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c index 013c85f20b5..f4a60ab6763 100644 --- a/arch/arm/plat-mxc/devices/platform-spi_imx.c +++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c @@ -21,6 +21,15 @@ #define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size) \ [id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size) +#ifdef CONFIG_SOC_IMX1 +const struct imx_spi_imx_data imx1_cspi_data[] __initconst = { +#define imx1_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX1, CSPI, "imx1-cspi", _id, _hwid, SZ_4K) + imx1_cspi_data_entry(0, 1), + imx1_cspi_data_entry(1, 2), +}; +#endif + #ifdef CONFIG_SOC_IMX21 const struct imx_spi_imx_data imx21_cspi_data[] __initconst = { #define imx21_cspi_data_entry(_id, _hwid) \ diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c deleted file mode 100644 index 8772ce346a5..00000000000 --- a/arch/arm/plat-mxc/ehci.c +++ /dev/null @@ -1,369 +0,0 @@ -/* - * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> - * Copyright (C) 2010 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY - * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - */ - -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/mxc_ehci.h> - -#define USBCTRL_OTGBASE_OFFSET 0x600 - -#define MX31_OTG_SIC_SHIFT 29 -#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT) -#define MX31_OTG_PM_BIT (1 << 24) - -#define MX31_H2_SIC_SHIFT 21 -#define MX31_H2_SIC_MASK (0x3 << MX31_H2_SIC_SHIFT) -#define MX31_H2_PM_BIT (1 << 16) -#define MX31_H2_DT_BIT (1 << 5) - -#define MX31_H1_SIC_SHIFT 13 -#define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT) -#define MX31_H1_PM_BIT (1 << 8) -#define MX31_H1_DT_BIT (1 << 4) - -#define MX35_OTG_SIC_SHIFT 29 -#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT) -#define MX35_OTG_PM_BIT (1 << 24) - -#define MX35_H1_SIC_SHIFT 21 -#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) -#define MX35_H1_PM_BIT (1 << 8) -#define MX35_H1_IPPUE_UP_BIT (1 << 7) -#define MX35_H1_IPPUE_DOWN_BIT (1 << 6) -#define MX35_H1_TLL_BIT (1 << 5) -#define MX35_H1_USBTE_BIT (1 << 4) - -#define MXC_OTG_OFFSET 0 -#define MXC_H1_OFFSET 0x200 -#define MXC_H2_OFFSET 0x400 - -/* USB_CTRL */ -#define MXC_OTG_UCTRL_OWIE_BIT (1 << 27) /* OTG wakeup intr enable */ -#define MXC_OTG_UCTRL_OPM_BIT (1 << 24) /* OTG power mask */ -#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) /* Host1 ULPI interrupt enable */ -#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) /* HOST1 wakeup intr enable */ -#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */ - -/* USB_PHY_CTRL_FUNC */ -#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */ -#define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */ - -/* USBH2CTRL */ -#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8) -#define MXC_H2_UCTRL_H2WIE_BIT (1 << 7) -#define MXC_H2_UCTRL_H2PM_BIT (1 << 4) - -#define MXC_USBCMD_OFFSET 0x140 - -/* USBCMD */ -#define MXC_UCMD_ITC_NO_THRESHOLD_MASK (~(0xff << 16)) /* Interrupt Threshold Control */ - -int mxc_initialize_usb_hw(int port, unsigned int flags) -{ - unsigned int v; -#if defined(CONFIG_SOC_IMX25) - if (cpu_is_mx25()) { - v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + - USBCTRL_OTGBASE_OFFSET)); - - switch (port) { - case 0: /* OTG port */ - v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX35_OTG_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX35_OTG_PM_BIT; - - break; - case 1: /* H1 port */ - v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT | - MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX35_H1_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX35_H1_PM_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX35_H1_TLL_BIT; - - if (flags & MXC_EHCI_INTERNAL_PHY) - v |= MX35_H1_USBTE_BIT; - - if (flags & MXC_EHCI_IPPUE_DOWN) - v |= MX35_H1_IPPUE_DOWN_BIT; - - if (flags & MXC_EHCI_IPPUE_UP) - v |= MX35_H1_IPPUE_UP_BIT; - - break; - default: - return -EINVAL; - } - - writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + - USBCTRL_OTGBASE_OFFSET)); - return 0; - } -#endif /* if defined(CONFIG_SOC_IMX25) */ -#if defined(CONFIG_ARCH_MX3) - if (cpu_is_mx31()) { - v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + - USBCTRL_OTGBASE_OFFSET)); - - switch (port) { - case 0: /* OTG port */ - v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX31_OTG_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX31_OTG_PM_BIT; - - break; - case 1: /* H1 port */ - v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX31_H1_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX31_H1_PM_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX31_H1_DT_BIT; - - break; - case 2: /* H2 port */ - v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX31_H2_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX31_H2_PM_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX31_H2_DT_BIT; - - break; - default: - return -EINVAL; - } - - writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + - USBCTRL_OTGBASE_OFFSET)); - return 0; - } - - if (cpu_is_mx35()) { - v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBCTRL_OTGBASE_OFFSET)); - - switch (port) { - case 0: /* OTG port */ - v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX35_OTG_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX35_OTG_PM_BIT; - - break; - case 1: /* H1 port */ - v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT | - MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX35_H1_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX35_H1_PM_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX35_H1_TLL_BIT; - - if (flags & MXC_EHCI_INTERNAL_PHY) - v |= MX35_H1_USBTE_BIT; - - if (flags & MXC_EHCI_IPPUE_DOWN) - v |= MX35_H1_IPPUE_DOWN_BIT; - - if (flags & MXC_EHCI_IPPUE_UP) - v |= MX35_H1_IPPUE_UP_BIT; - - break; - default: - return -EINVAL; - } - - writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBCTRL_OTGBASE_OFFSET)); - return 0; - } -#endif /* CONFIG_ARCH_MX3 */ -#ifdef CONFIG_MACH_MX27 - if (cpu_is_mx27()) { - /* On i.MX27 we can use the i.MX31 USBCTRL bits, they - * are identical - */ - v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + - USBCTRL_OTGBASE_OFFSET)); - switch (port) { - case 0: /* OTG port */ - v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX31_OTG_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX31_OTG_PM_BIT; - break; - case 1: /* H1 port */ - v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX31_H1_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX31_H1_PM_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX31_H1_DT_BIT; - - break; - case 2: /* H2 port */ - v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX31_H2_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX31_H2_PM_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX31_H2_DT_BIT; - - break; - default: - return -EINVAL; - } - writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + - USBCTRL_OTGBASE_OFFSET)); - return 0; - } -#endif /* CONFIG_MACH_MX27 */ -#ifdef CONFIG_SOC_IMX51 - if (cpu_is_mx51()) { - void __iomem *usb_base; - void __iomem *usbotg_base; - void __iomem *usbother_base; - int ret = 0; - - usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) { - printk(KERN_ERR "%s(): ioremap failed\n", __func__); - return -ENOMEM; - } - - switch (port) { - case 0: /* OTG port */ - usbotg_base = usb_base + MXC_OTG_OFFSET; - break; - case 1: /* Host 1 port */ - usbotg_base = usb_base + MXC_H1_OFFSET; - break; - case 2: /* Host 2 port */ - usbotg_base = usb_base + MXC_H2_OFFSET; - break; - default: - printk(KERN_ERR"%s no such port %d\n", __func__, port); - ret = -ENOENT; - goto error; - } - usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; - - switch (port) { - case 0: /*OTG port */ - if (flags & MXC_EHCI_INTERNAL_PHY) { - v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); - - if (flags & MXC_EHCI_POWER_PINS_ENABLED) { - /* OC/USBPWR is not used */ - v |= MXC_OTG_PHYCTRL_OC_DIS_BIT; - } else { - /* OC/USBPWR is used */ - v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT; - } - __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); - - v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); - if (flags & MXC_EHCI_WAKEUP_ENABLED) - v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */ - else - v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */ - if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v |= MXC_OTG_UCTRL_OPM_BIT; - else - v &= ~MXC_OTG_UCTRL_OPM_BIT; - __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); - } - break; - case 1: /* Host 1 */ - /*Host ULPI */ - v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); - if (flags & MXC_EHCI_WAKEUP_ENABLED) { - /* HOST1 wakeup/ULPI intr enable */ - v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT); - } else { - /* HOST1 wakeup/ULPI intr disable */ - v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT); - } - - if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/ - else - v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/ - __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); - - v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); - if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */ - else - v |= MXC_H1_OC_DIS_BIT; /* OC is not used */ - __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); - - v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET); - if (flags & MXC_EHCI_ITC_NO_THRESHOLD) - /* Interrupt Threshold Control:Immediate (no threshold) */ - v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK; - __raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET); - break; - case 2: /* Host 2 ULPI */ - v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET); - if (flags & MXC_EHCI_WAKEUP_ENABLED) { - /* HOST1 wakeup/ULPI intr enable */ - v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT); - } else { - /* HOST1 wakeup/ULPI intr disable */ - v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT); - } - - if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/ - else - v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/ - __raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET); - break; - } - -error: - iounmap(usb_base); - return ret; - } -#endif - printk(KERN_WARNING - "%s() unable to setup USBCONTROL for this CPU\n", __func__); - return -EINVAL; -} -EXPORT_SYMBOL(mxc_initialize_usb_hw); - diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index d17b3c996b8..57d59855f9e 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -233,6 +233,7 @@ static int gpio_set_wake_irq(struct irq_data *d, u32 enable) } static struct irq_chip gpio_irq_chip = { + .name = "GPIO", .irq_ack = gpio_ack_irq, .irq_mask = gpio_mask_irq, .irq_unmask = gpio_unmask_irq, @@ -349,113 +350,3 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) return 0; } - -#define DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, _irq_high) \ - { \ - .chip.label = "gpio-" #_id, \ - .irq = _irq, \ - .irq_high = _irq_high, \ - .base = soc ## _IO_ADDRESS( \ - soc ## _GPIO ## _hwid ## _BASE_ADDR), \ - .virtual_irq_start = MXC_GPIO_IRQ_START + (_id) * 32, \ - } - -#define DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, _irq) \ - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, 0) -#define DEFINE_IMX_GPIO_PORT(soc, _id, _hwid) \ - DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, 0) - -#define DEFINE_REGISTER_FUNCTION(prefix) \ -int __init prefix ## _register_gpios(void) \ -{ \ - return mxc_gpio_init(prefix ## _gpio_ports, \ - ARRAY_SIZE(prefix ## _gpio_ports)); \ -} - -#if defined(CONFIG_SOC_IMX1) -static struct mxc_gpio_port imx1_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 0, 1, MX1_GPIO_INT_PORTA), - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 1, 2, MX1_GPIO_INT_PORTB), - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 2, 3, MX1_GPIO_INT_PORTC), - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 3, 4, MX1_GPIO_INT_PORTD), -}; - -DEFINE_REGISTER_FUNCTION(imx1) - -#endif /* if defined(CONFIG_SOC_IMX1) */ - -#if defined(CONFIG_SOC_IMX21) -static struct mxc_gpio_port imx21_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX21, 0, 1, MX21_INT_GPIO), - DEFINE_IMX_GPIO_PORT(MX21, 1, 2), - DEFINE_IMX_GPIO_PORT(MX21, 2, 3), - DEFINE_IMX_GPIO_PORT(MX21, 3, 4), - DEFINE_IMX_GPIO_PORT(MX21, 4, 5), - DEFINE_IMX_GPIO_PORT(MX21, 5, 6), -}; - -DEFINE_REGISTER_FUNCTION(imx21) - -#endif /* if defined(CONFIG_SOC_IMX21) */ - -#if defined(CONFIG_SOC_IMX25) -static struct mxc_gpio_port imx25_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 0, 1, MX25_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 1, 2, MX25_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 2, 3, MX25_INT_GPIO3), - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 3, 4, MX25_INT_GPIO4), -}; - -DEFINE_REGISTER_FUNCTION(imx25) - -#endif /* if defined(CONFIG_SOC_IMX25) */ - -#if defined(CONFIG_SOC_IMX27) -static struct mxc_gpio_port imx27_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX27, 0, 1, MX27_INT_GPIO), - DEFINE_IMX_GPIO_PORT(MX27, 1, 2), - DEFINE_IMX_GPIO_PORT(MX27, 2, 3), - DEFINE_IMX_GPIO_PORT(MX27, 3, 4), - DEFINE_IMX_GPIO_PORT(MX27, 4, 5), - DEFINE_IMX_GPIO_PORT(MX27, 5, 6), -}; - -DEFINE_REGISTER_FUNCTION(imx27) - -#endif /* if defined(CONFIG_SOC_IMX27) */ - -#if defined(CONFIG_SOC_IMX31) -static struct mxc_gpio_port imx31_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3), -}; - -DEFINE_REGISTER_FUNCTION(imx31) - -#endif /* if defined(CONFIG_SOC_IMX31) */ - -#if defined(CONFIG_SOC_IMX35) -static struct mxc_gpio_port imx35_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3), -}; - -DEFINE_REGISTER_FUNCTION(imx35) - -#endif /* if defined(CONFIG_SOC_IMX35) */ - -#if defined(CONFIG_SOC_IMX50) -static struct mxc_gpio_port imx50_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 0, 1, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 1, 2, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 2, 3, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 3, 4, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 4, 5, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 5, 6, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), -}; - -DEFINE_REGISTER_FUNCTION(imx50) - -#endif /* if defined(CONFIG_SOC_IMX50) */ diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index aea2cd3b6d1..a22ebe11a60 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -24,6 +24,16 @@ extern void mx50_map_io(void); extern void mx51_map_io(void); extern void mx53_map_io(void); extern void mxc91231_map_io(void); +extern void imx1_init_early(void); +extern void imx21_init_early(void); +extern void imx25_init_early(void); +extern void imx27_init_early(void); +extern void imx31_init_early(void); +extern void imx35_init_early(void); +extern void imx50_init_early(void); +extern void imx51_init_early(void); +extern void imx53_init_early(void); +extern void mxc91231_init_early(void); extern void mxc_init_irq(void __iomem *); extern void tzic_init_irq(void __iomem *); extern void mx1_init_irq(void); diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h index 0044e2f1bea..a2747f12813 100644 --- a/arch/arm/plat-mxc/include/mach/gpio.h +++ b/arch/arm/plat-mxc/include/mach/gpio.h @@ -46,6 +46,21 @@ struct mxc_gpio_port { spinlock_t lock; }; +#define DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, _irq_high) \ + { \ + .chip.label = "gpio-" #_id, \ + .irq = _irq, \ + .irq_high = _irq_high, \ + .base = soc ## _IO_ADDRESS( \ + soc ## _GPIO ## _hwid ## _BASE_ADDR), \ + .virtual_irq_start = MXC_GPIO_IRQ_START + (_id) * 32, \ + } + +#define DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, _irq) \ + DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, 0) +#define DEFINE_IMX_GPIO_PORT(soc, _id, _hwid) \ + DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, 0) + int mxc_gpio_init(struct mxc_gpio_port*, int); #endif diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index cbaed295a2b..c92f0b1f216 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -112,12 +112,12 @@ enum iomux_gp_func { * - setups the iomux according to the configuration * - if the pin is configured as a GPIO, we claim it through kernel gpiolib */ -int mxc_iomux_alloc_pin(const unsigned int pin, const char *label); +int mxc_iomux_alloc_pin(unsigned int pin, const char *label); /* * setups mutliple pins * convenient way to call the above function with tables */ -int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count, +int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count, const char *label); /* @@ -126,12 +126,12 @@ int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count, * - frees the GPIO if the pin was configured as GPIO * - DOES NOT reconfigure the IOMUX in its reset state */ -void mxc_iomux_release_pin(const unsigned int pin); +void mxc_iomux_release_pin(unsigned int pin); /* * releases multiple pins * convenvient way to call the above function with tables */ -void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count); +void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count); /* * This function enables/disables the general purpose function for a particular diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h index 2a24bae1b87..3117c18bbbd 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx35.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h @@ -989,13 +989,13 @@ #define MX35_PAD_ATA_DATA2__IPU_DIAGB_9 IOMUX_PAD(0x6e8, 0x284, 6, 0x0, 0, NO_PAD_CTRL) #define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28 IOMUX_PAD(0x6e8, 0x284, 7, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA3__ATA_DATA_3 IOMUX_PAD(0x6e8, 0x288, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA3__ESDHC3_CLK IOMUX_PAD(0x6e8, 0x288, 1, 0x814, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x6e8, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA3__CSPI2_SCLK IOMUX_PAD(0x6e8, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA3__GPIO2_16 IOMUX_PAD(0x6e8, 0x288, 5, 0x884, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10 IOMUX_PAD(0x6e8, 0x288, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29 IOMUX_PAD(0x6e8, 0x288, 7, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__ATA_DATA_3 IOMUX_PAD(0x6ec, 0x288, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__ESDHC3_CLK IOMUX_PAD(0x6ec, 0x288, 1, 0x814, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x6ec, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__CSPI2_SCLK IOMUX_PAD(0x6ec, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__GPIO2_16 IOMUX_PAD(0x6ec, 0x288, 5, 0x884, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10 IOMUX_PAD(0x6ec, 0x288, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29 IOMUX_PAD(0x6ec, 0x288, 7, 0x0, 0, NO_PAD_CTRL) #define MX35_PAD_ATA_DATA4__ATA_DATA_4 IOMUX_PAD(0x6f0, 0x28c, 0, 0x0, 0, NO_PAD_CTRL) #define MX35_PAD_ATA_DATA4__ESDHC3_CMD IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx50.h b/arch/arm/plat-mxc/include/mach/iomux-mx50.h index 058a922ca14..98e7fd0b908 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx50.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx50.h @@ -86,7 +86,7 @@ #define MX50_PAD_I2C1_SCL__I2C1_SCL IOMUX_PAD(0x2EC, 0x40, IOMUX_CONFIG_SION, 0x0, 0, \ MX50_I2C_PAD_CTRL) #define MX50_PAD_I2C1_SCL__GPIO_6_18 IOMUX_PAD(0x2EC, 0x40, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_I2C1_SCL__UART2_TXD IOMUX_PAD(0x2EC, 0x40, 2, 0x7cc, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_I2C1_SCL__UART2_TXD IOMUX_PAD(0x2EC, 0x40, 2, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_I2C1_SDA__I2C1_SDA IOMUX_PAD(0x2F0, 0x44, IOMUX_CONFIG_SION, 0x0, 0, \ MX50_I2C_PAD_CTRL) @@ -96,7 +96,7 @@ #define MX50_PAD_I2C2_SCL__I2C2_SCL IOMUX_PAD(0x2F4, 0x48, IOMUX_CONFIG_SION, 0x0, 0, \ MX50_I2C_PAD_CTRL) #define MX50_PAD_I2C2_SCL__GPIO_6_20 IOMUX_PAD(0x2F4, 0x48, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_I2C2_SCL__UART2_CTS IOMUX_PAD(0x2F4, 0x48, 2, 0x7c8, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_I2C2_SCL__UART2_CTS IOMUX_PAD(0x2F4, 0x48, 2, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_I2C2_SCL__DCDC_OK IOMUX_PAD(0x2F4, 0x48, 7, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_I2C2_SDA__I2C2_SDA IOMUX_PAD(0x2F8, 0x4C, IOMUX_CONFIG_SION, 0x0, 0, \ @@ -172,7 +172,7 @@ #define MX50_PAD_SSI_RXFS__AUD3_RXFS IOMUX_PAD(0x328, 0x7C, 0, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_SSI_RXFS__GPIO_6_4 IOMUX_PAD(0x328, 0x7C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SSI_RXFS__UART5_TXD IOMUX_PAD(0x328, 0x7C, 2, 0x7e4, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_SSI_RXFS__UART5_TXD IOMUX_PAD(0x328, 0x7C, 2, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_SSI_RXFS__WEIM_D6 IOMUX_PAD(0x328, 0x7C, 3, 0x804, 0, NO_PAD_CTRL) #define MX50_PAD_SSI_RXFS__CSPI_SS2 IOMUX_PAD(0x328, 0x7C, 4, 0x6f0, 0, MX50_CSPI_SS_PAD) #define MX50_PAD_SSI_RXFS__FEC_COL IOMUX_PAD(0x328, 0x7C, 5, 0x770, 0, PAD_CTL_DSE_HIGH) @@ -186,25 +186,25 @@ #define MX50_PAD_SSI_RXC__FEC_RX_CLK IOMUX_PAD(0x32C, 0x80, 5, 0x780, 0, NO_PAD_CTRL) #define MX50_PAD_SSI_RXC__FEC_MDIO IOMUX_PAD(0x32C, 0x80, 6, 0x774, 1, MX50_FEC_PAD_CTRL) -#define MX50_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x330, 0x84, 0, 0x7c4, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x330, 0x84, 0, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_UART1_TXD__GPIO_6_6 IOMUX_PAD(0x330, 0x84, 1, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x334, 0x88, 0, 0x7c4, 1, MX50_UART_PAD_CTRL) #define MX50_PAD_UART1_RXD__GPIO_6_7 IOMUX_PAD(0x334, 0x88, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x338, 0x8C, 0, 0x7c0, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x338, 0x8C, 0, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_UART1_CTS__GPIO_6_8 IOMUX_PAD(0x338, 0x8C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_UART1_CTS__UART5_TXD IOMUX_PAD(0x338, 0x8C, 2, 0x7e4, 2, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART1_CTS__UART5_TXD IOMUX_PAD(0x338, 0x8C, 2, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_UART1_CTS__SD4_D4 IOMUX_PAD(0x338, 0x8C, 4, 0x760, 0, MX50_SD_PAD_CTRL) #define MX50_PAD_UART1_CTS__SD4_CMD IOMUX_PAD(0x338, 0x8C, 5, 0x74c, 0, MX50_SD_PAD_CTRL) #define MX50_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x33C, 0x90, 0, 0x7c0, 1, MX50_UART_PAD_CTRL) #define MX50_PAD_UART1_RTS__GPIO_6_9 IOMUX_PAD(0x33C, 0x90, 1, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_UART1_RTS__UART5_RXD IOMUX_PAD(0x33C, 0x90, 2, 0x7e4, 3, MX50_UART_PAD_CTRL) -#define MX50_PAD_UART1_RTS__SD4_D5 IOMUX_PAD(0x33C, 0x90, 4, 0x0, 1, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART1_RTS__SD4_CLK IOMUX_PAD(0x33C, 0x90, 5, 0x0, 1, MX50_SD_PAD_CTRL) +#define MX50_PAD_UART1_RTS__SD4_D5 IOMUX_PAD(0x33C, 0x90, 4, 0x764, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_UART1_RTS__SD4_CLK IOMUX_PAD(0x33C, 0x90, 5, 0x748, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x340, 0x94, 0, 0x7cc, 2, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x340, 0x94, 0, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_UART2_TXD__GPIO_6_10 IOMUX_PAD(0x340, 0x94, 1, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_UART2_TXD__SD4_D6 IOMUX_PAD(0x340, 0x94, 4, 0x768, 0, MX50_SD_PAD_CTRL) #define MX50_PAD_UART2_TXD__SD4_D4 IOMUX_PAD(0x340, 0x94, 5, 0x760, 1, MX50_SD_PAD_CTRL) @@ -214,7 +214,7 @@ #define MX50_PAD_UART2_RXD__SD4_D7 IOMUX_PAD(0x344, 0x98, 4, 0x76c, 0, MX50_SD_PAD_CTRL) #define MX50_PAD_UART2_RXD__SD4_D5 IOMUX_PAD(0x344, 0x98, 5, 0x764, 1, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x348, 0x9C, 0, 0x7c8, 2, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x348, 0x9C, 0, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_UART2_CTS__GPIO_6_12 IOMUX_PAD(0x348, 0x9C, 1, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_UART2_CTS__SD4_CMD IOMUX_PAD(0x348, 0x9C, 4, 0x74c, 1, MX50_SD_PAD_CTRL) #define MX50_PAD_UART2_CTS__SD4_D6 IOMUX_PAD(0x348, 0x9C, 5, 0x768, 1, MX50_SD_PAD_CTRL) @@ -224,7 +224,7 @@ #define MX50_PAD_UART2_RTS__SD4_CLK IOMUX_PAD(0x34C, 0xA0, 4, 0x748, 1, MX50_SD_PAD_CTRL) #define MX50_PAD_UART2_RTS__SD4_D7 IOMUX_PAD(0x34C, 0xA0, 5, 0x76c, 1, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART3_TXD__UART3_TXD IOMUX_PAD(0x350, 0xA4, 0, 0x7d4, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART3_TXD__UART3_TXD IOMUX_PAD(0x350, 0xA4, 0, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_UART3_TXD__GPIO_6_14 IOMUX_PAD(0x350, 0xA4, 1, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_UART3_TXD__SD1_D4 IOMUX_PAD(0x350, 0xA4, 3, 0x0, 0, MX50_SD_PAD_CTRL) #define MX50_PAD_UART3_TXD__SD4_D0 IOMUX_PAD(0x350, 0xA4, 4, 0x750, 0, MX50_SD_PAD_CTRL) @@ -238,9 +238,9 @@ #define MX50_PAD_UART3_RXD__SD2_CD IOMUX_PAD(0x354, 0xA8, 5, 0x740, 0, MX50_SD_PAD_CTRL) #define MX50_PAD_UART3_RXD__WEIM_D13 IOMUX_PAD(0x354, 0xA8, 6, 0x820, 0, NO_PAD_CTRL) -#define MX50_PAD_UART4_TXD__UART4_TXD IOMUX_PAD(0x358, 0xAC, 0, 0x7dc, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART4_TXD__UART4_TXD IOMUX_PAD(0x358, 0xAC, 0, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_UART4_TXD__GPIO_6_16 IOMUX_PAD(0x358, 0xAC, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_UART4_TXD__UART3_CTS IOMUX_PAD(0x358, 0xAC, 2, 0x7d0, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART4_TXD__UART3_CTS IOMUX_PAD(0x358, 0xAC, 2, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_UART4_TXD__SD1_D6 IOMUX_PAD(0x358, 0xAC, 3, 0x0, 0, MX50_SD_PAD_CTRL) #define MX50_PAD_UART4_TXD__SD4_D2 IOMUX_PAD(0x358, 0xAC, 4, 0x758, 0, MX50_SD_PAD_CTRL) #define MX50_PAD_UART4_TXD__SD2_LCTL IOMUX_PAD(0x358, 0xAC, 5, 0x0, 0, MX50_SD_PAD_CTRL) @@ -278,7 +278,7 @@ #define MX50_PAD_ECSPI1_MOSI__GPIO_4_13 IOMUX_PAD(0x374, 0xC8, 1, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_ECSPI1_MOSI__CSPI_SS1 IOMUX_PAD(0x374, 0xC8, 2, 0x6ec, 1, MX50_CSPI_SS_PAD) #define MX50_PAD_ECSPI1_MOSI__ECSPI2_SS1 IOMUX_PAD(0x374, 0xC8, 3, 0x0, 0, MX50_CSPI_SS_PAD) -#define MX50_PAD_ECSPI1_MOSI__UART3_CTS IOMUX_PAD(0x374, 0xC8, 4, 0x7d0, 3, MX50_UART_PAD_CTRL) +#define MX50_PAD_ECSPI1_MOSI__UART3_CTS IOMUX_PAD(0x374, 0xC8, 4, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_ECSPI1_MOSI__EPDC_SDCE7 IOMUX_PAD(0x374, 0xC8, 5, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_ECSPI1_MOSI__WEIM_D9 IOMUX_PAD(0x374, 0xC8, 7, 0x810, 0, NO_PAD_CTRL) @@ -294,7 +294,7 @@ #define MX50_PAD_ECSPI1_SS0__GPIO_4_15 IOMUX_PAD(0x37C, 0xD0, 1, 0x0, 0, PAD_CTL_PUS_100K_UP) #define MX50_PAD_ECSPI1_SS0__CSPI_SS3 IOMUX_PAD(0x37C, 0xD0, 2, 0x6f4, 1, MX50_CSPI_SS_PAD) #define MX50_PAD_ECSPI1_SS0__ECSPI2_SS3 IOMUX_PAD(0x37C, 0xD0, 3, 0x0, 0, MX50_CSPI_SS_PAD) -#define MX50_PAD_ECSPI1_SS0__UART4_CTS IOMUX_PAD(0x37C, 0xD0, 4, 0x7d8, 1, MX50_UART_PAD_CTRL) +#define MX50_PAD_ECSPI1_SS0__UART4_CTS IOMUX_PAD(0x37C, 0xD0, 4, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_ECSPI1_SS0__EPDC_SDCE9 IOMUX_PAD(0x37C, 0xD0, 5, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_ECSPI1_SS0__WEIM_D11 IOMUX_PAD(0x37C, 0xD0, 7, 0x818, 0, NO_PAD_CTRL) @@ -311,17 +311,17 @@ #define MX50_PAD_ECSPI2_MOSI__GPIO_4_17 IOMUX_PAD(0x384, 0xD8, 1, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_ECSPI2_MOSI__ELCDIF_RD IOMUX_PAD(0x384, 0xD8, 2, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_ECSPI2_MOSI__ECSPI1_SS1 IOMUX_PAD(0x384, 0xD8, 3, 0x0, 0, MX50_CSPI_SS_PAD) -#define MX50_PAD_ECSPI2_MOSI__UART5_CTS IOMUX_PAD(0x384, 0xD8, 4, 0x7e0, 1, MX50_UART_PAD_CTRL) +#define MX50_PAD_ECSPI2_MOSI__UART5_CTS IOMUX_PAD(0x384, 0xD8, 4, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_ECSPI2_MOSI__ELCDIF_EN IOMUX_PAD(0x384, 0xD8, 5, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_ECSPI2_MOSI__NANDF_CEN5 IOMUX_PAD(0x384, 0xD8, 6, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_ECSPI2_MOSI__WEIM_D9 IOMUX_PAD(0x384, 0xD8, 7, 0x810, 1, NO_PAD_CTRL) -#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO IOMUX_PAD(0x388, 0xDC, 0, 0x73c, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO IOMUX_PAD(0x388, 0xDC, 0, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_ECSPI2_MISO__GPIO_4_18 IOMUX_PAD(0x388, 0xDC, 1, 0x0, 0, PAD_CTL_PUS_100K_UP) #define MX50_PAD_ECSPI2_MISO__ELCDIF_RS IOMUX_PAD(0x388, 0xDC, 2, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_ECSPI2_MISO__ECSPI1_SS2 IOMUX_PAD(0x388, 0xDC, 3, 0x0, 0, MX50_CSPI_SS_PAD) -#define MX50_PAD_ECSPI2_MISO__UART5_TXD IOMUX_PAD(0x388, 0xDC, 4, 0x7e4, 4, MX50_UART_PAD_CTRL) -#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC IOMUX_PAD(0x388, 0xDC, 5, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_MISO__UART5_TXD IOMUX_PAD(0x388, 0xDC, 4, 0x0, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC IOMUX_PAD(0x388, 0xDC, 5, 0x73c, 0, NO_PAD_CTRL) #define MX50_PAD_ECSPI2_MISO__NANDF_CEN6 IOMUX_PAD(0x388, 0xDC, 6, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_ECSPI2_MISO__WEIM_D10 IOMUX_PAD(0x388, 0xDC, 7, 0x814, 1, NO_PAD_CTRL) @@ -503,7 +503,7 @@ #define MX50_PAD_DISP_RD__ELCDIF_EN IOMUX_PAD(0x430, 0x150, 2, 0x0, 0, MX50_ELCDIF_PAD_CTRL) #define MX50_PAD_DISP_RD__WEIM_A25 IOMUX_PAD(0x430, 0x150, 3, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_RS__ELCDIF_RS IOMUX_PAD(0x434, 0x154, 0, 0x73c, 1, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_RS__ELCDIF_RS IOMUX_PAD(0x434, 0x154, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL) #define MX50_PAD_DISP_RS__GPIO_2_17 IOMUX_PAD(0x434, 0x154, 1, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_DISP_RS__ELCDIF_VSYNC IOMUX_PAD(0x434, 0x154, 2, 0x73c, 1, MX50_ELCDIF_PAD_CTRL) #define MX50_PAD_DISP_RS__WEIM_A26 IOMUX_PAD(0x434, 0x154, 3, 0x0, 0, NO_PAD_CTRL) @@ -691,8 +691,8 @@ #define MX50_PAD_EPDC_D9__EPDC_D9 IOMUX_PAD(0x570, 0x1D4, 0, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_EPDC_D9__GPIO_3_9 IOMUX_PAD(0x570, 0x1D4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D9__WEIM_D9 IOMUX_PAD(0x570, 0x1D4, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D9__ELCDIF_D25 IOMUX_PAD(0x570, 0x1D4, 3, 0x810, 2, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_D9__WEIM_D9 IOMUX_PAD(0x570, 0x1D4, 2, 0x810, 2, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D9__ELCDIF_D25 IOMUX_PAD(0x570, 0x1D4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) #define MX50_PAD_EPDC_D10__EPDC_D10 IOMUX_PAD(0x574, 0x1D8, 0, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_EPDC_D10__GPIO_3_10 IOMUX_PAD(0x574, 0x1D8, 1, 0x0, 0, NO_PAD_CTRL) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h index b6767f90ef1..df6acc066fb 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h @@ -473,7 +473,7 @@ #define _MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, 0, 0x09ec, 2, 0) #define _MX51_PAD_UART2_TXD__FIRI_RXD IOMUX_PAD(0x62c, 0x23c, 1, 0x0000, 0, 0) #define _MX51_PAD_UART2_TXD__GPIO1_21 IOMUX_PAD(0x62c, 0x23c, 3, 0x0000, 0, 0) -#define _MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62c, 0x23c, 0, 0x09ec, 3, 0) +#define _MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62c, 0x23c, 0, 0x0000, 0, 0) #define _MX51_PAD_UART3_RXD__CSI1_D0 IOMUX_PAD(0x630, 0x240, 2, 0x0000, 0, 0) #define _MX51_PAD_UART3_RXD__GPIO1_22 IOMUX_PAD(0x630, 0x240, 3, 0x0000, 0, 0) #define _MX51_PAD_UART3_RXD__UART1_DTR IOMUX_PAD(0x630, 0x240, 0, 0x0000, 0, 0) @@ -528,7 +528,7 @@ #define _MX51_PAD_USBH1_DATA1__UART2_RXD IOMUX_PAD(0x68c, 0x28c, 1, 0x09ec, 4, 0) #define _MX51_PAD_USBH1_DATA1__USBH1_DATA1 IOMUX_PAD(0x68c, 0x28c, 0, 0x0000, 0, 0) #define _MX51_PAD_USBH1_DATA2__GPIO1_13 IOMUX_PAD(0x690, 0x290, 2, 0x0000, 0, 0) -#define _MX51_PAD_USBH1_DATA2__UART2_TXD IOMUX_PAD(0x690, 0x290, 1, 0x09ec, 5, 0) +#define _MX51_PAD_USBH1_DATA2__UART2_TXD IOMUX_PAD(0x690, 0x290, 1, 0x0000, 0, 0) #define _MX51_PAD_USBH1_DATA2__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 0, 0x0000, 0, 0) #define _MX51_PAD_USBH1_DATA3__GPIO1_14 IOMUX_PAD(0x694, 0x294, 2, 0x0000, 0, 0) #define _MX51_PAD_USBH1_DATA3__UART2_RTS IOMUX_PAD(0x694, 0x294, 1, 0x09e8, 5, 0) @@ -985,11 +985,11 @@ #define MX51_PAD_NANDF_WE_B__GPIO3_3 (_MX51_PAD_NANDF_WE_B__GPIO3_3 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) #define MX51_PAD_NANDF_WE_B__NANDF_WE_B (_MX51_PAD_NANDF_WE_B__NANDF_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_NANDF_WE_B__PATA_DIOW (_MX51_PAD_NANDF_WE_B__PATA_DIOW | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX51_PAD_NANDF_WE_B__SD3_DATA0 (_MX51_PAD_NANDF_WE_B__SD3_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_WE_B__SD3_DATA0 (_MX51_PAD_NANDF_WE_B__SD3_DATA0 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL)) #define MX51_PAD_NANDF_RE_B__GPIO3_4 (_MX51_PAD_NANDF_RE_B__GPIO3_4 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) #define MX51_PAD_NANDF_RE_B__NANDF_RE_B (_MX51_PAD_NANDF_RE_B__NANDF_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_NANDF_RE_B__PATA_DIOR (_MX51_PAD_NANDF_RE_B__PATA_DIOR | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX51_PAD_NANDF_RE_B__SD3_DATA1 (_MX51_PAD_NANDF_RE_B__SD3_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RE_B__SD3_DATA1 (_MX51_PAD_NANDF_RE_B__SD3_DATA1 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL)) #define MX51_PAD_NANDF_ALE__GPIO3_5 (_MX51_PAD_NANDF_ALE__GPIO3_5 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) #define MX51_PAD_NANDF_ALE__NANDF_ALE (_MX51_PAD_NANDF_ALE__NANDF_ALE | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_NANDF_ALE__PATA_BUFFER_EN (_MX51_PAD_NANDF_ALE__PATA_BUFFER_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -999,18 +999,18 @@ #define MX51_PAD_NANDF_WP_B__GPIO3_7 (_MX51_PAD_NANDF_WP_B__GPIO3_7 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) #define MX51_PAD_NANDF_WP_B__NANDF_WP_B (_MX51_PAD_NANDF_WP_B__NANDF_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_NANDF_WP_B__PATA_DMACK (_MX51_PAD_NANDF_WP_B__PATA_DMACK | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX51_PAD_NANDF_WP_B__SD3_DATA2 (_MX51_PAD_NANDF_WP_B__SD3_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_WP_B__SD3_DATA2 (_MX51_PAD_NANDF_WP_B__SD3_DATA2 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL)) #define MX51_PAD_NANDF_RB0__ECSPI2_SS1 (_MX51_PAD_NANDF_RB0__ECSPI2_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) #define MX51_PAD_NANDF_RB0__GPIO3_8 (_MX51_PAD_NANDF_RB0__GPIO3_8 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) #define MX51_PAD_NANDF_RB0__NANDF_RB0 (_MX51_PAD_NANDF_RB0__NANDF_RB0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_NANDF_RB0__PATA_DMARQ (_MX51_PAD_NANDF_RB0__PATA_DMARQ | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX51_PAD_NANDF_RB0__SD3_DATA3 (_MX51_PAD_NANDF_RB0__SD3_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RB0__SD3_DATA3 (_MX51_PAD_NANDF_RB0__SD3_DATA3 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL)) #define MX51_PAD_NANDF_RB1__CSPI_MOSI (_MX51_PAD_NANDF_RB1__CSPI_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) #define MX51_PAD_NANDF_RB1__ECSPI2_RDY (_MX51_PAD_NANDF_RB1__ECSPI2_RDY | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) #define MX51_PAD_NANDF_RB1__GPIO3_9 (_MX51_PAD_NANDF_RB1__GPIO3_9 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) #define MX51_PAD_NANDF_RB1__NANDF_RB1 (_MX51_PAD_NANDF_RB1__NANDF_RB1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_NANDF_RB1__PATA_IORDY (_MX51_PAD_NANDF_RB1__PATA_IORDY | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX51_PAD_NANDF_RB1__SD4_CMD (_MX51_PAD_NANDF_RB1__SD4_CMD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RB1__SD4_CMD (_MX51_PAD_NANDF_RB1__SD4_CMD | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL)) #define MX51_PAD_NANDF_RB2__DISP2_WAIT (_MX51_PAD_NANDF_RB2__DISP2_WAIT | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_NANDF_RB2__ECSPI2_SCLK (_MX51_PAD_NANDF_RB2__ECSPI2_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) #define MX51_PAD_NANDF_RB2__FEC_COL (_MX51_PAD_NANDF_RB2__FEC_COL | MUX_PAD_CTRL(MX51_PAD_CTRL_2)) @@ -1036,41 +1036,41 @@ #define MX51_PAD_NANDF_CS2__GPIO3_18 (_MX51_PAD_NANDF_CS2__GPIO3_18 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) #define MX51_PAD_NANDF_CS2__NANDF_CS2 (_MX51_PAD_NANDF_CS2__NANDF_CS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_NANDF_CS2__PATA_CS_0 (_MX51_PAD_NANDF_CS2__PATA_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX51_PAD_NANDF_CS2__SD4_CLK (_MX51_PAD_NANDF_CS2__SD4_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS2__SD4_CLK (_MX51_PAD_NANDF_CS2__SD4_CLK | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)) #define MX51_PAD_NANDF_CS2__USBH3_H1_DP (_MX51_PAD_NANDF_CS2__USBH3_H1_DP | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_NANDF_CS3__FEC_MDC (_MX51_PAD_NANDF_CS3__FEC_MDC | MUX_PAD_CTRL(MX51_PAD_CTRL_5)) #define MX51_PAD_NANDF_CS3__GPIO3_19 (_MX51_PAD_NANDF_CS3__GPIO3_19 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) #define MX51_PAD_NANDF_CS3__NANDF_CS3 (_MX51_PAD_NANDF_CS3__NANDF_CS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_NANDF_CS3__PATA_CS_1 (_MX51_PAD_NANDF_CS3__PATA_CS_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX51_PAD_NANDF_CS3__SD4_DAT0 (_MX51_PAD_NANDF_CS3__SD4_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS3__SD4_DAT0 (_MX51_PAD_NANDF_CS3__SD4_DAT0 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL)) #define MX51_PAD_NANDF_CS3__USBH3_H1_DM (_MX51_PAD_NANDF_CS3__USBH3_H1_DM | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_NANDF_CS4__FEC_TDATA1 (_MX51_PAD_NANDF_CS4__FEC_TDATA1 | MUX_PAD_CTRL(MX51_PAD_CTRL_5)) #define MX51_PAD_NANDF_CS4__GPIO3_20 (_MX51_PAD_NANDF_CS4__GPIO3_20 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) #define MX51_PAD_NANDF_CS4__NANDF_CS4 (_MX51_PAD_NANDF_CS4__NANDF_CS4 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_NANDF_CS4__PATA_DA_0 (_MX51_PAD_NANDF_CS4__PATA_DA_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX51_PAD_NANDF_CS4__SD4_DAT1 (_MX51_PAD_NANDF_CS4__SD4_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS4__SD4_DAT1 (_MX51_PAD_NANDF_CS4__SD4_DAT1 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL)) #define MX51_PAD_NANDF_CS4__USBH3_STP (_MX51_PAD_NANDF_CS4__USBH3_STP | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_NANDF_CS5__FEC_TDATA2 (_MX51_PAD_NANDF_CS5__FEC_TDATA2 | MUX_PAD_CTRL(MX51_PAD_CTRL_5)) #define MX51_PAD_NANDF_CS5__GPIO3_21 (_MX51_PAD_NANDF_CS5__GPIO3_21 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) #define MX51_PAD_NANDF_CS5__NANDF_CS5 (_MX51_PAD_NANDF_CS5__NANDF_CS5 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_NANDF_CS5__PATA_DA_1 (_MX51_PAD_NANDF_CS5__PATA_DA_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX51_PAD_NANDF_CS5__SD4_DAT2 (_MX51_PAD_NANDF_CS5__SD4_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS5__SD4_DAT2 (_MX51_PAD_NANDF_CS5__SD4_DAT2 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL)) #define MX51_PAD_NANDF_CS5__USBH3_DIR (_MX51_PAD_NANDF_CS5__USBH3_DIR | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_NANDF_CS6__CSPI_SS3 (_MX51_PAD_NANDF_CS6__CSPI_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) #define MX51_PAD_NANDF_CS6__FEC_TDATA3 (_MX51_PAD_NANDF_CS6__FEC_TDATA3 | MUX_PAD_CTRL(MX51_PAD_CTRL_5)) #define MX51_PAD_NANDF_CS6__GPIO3_22 (_MX51_PAD_NANDF_CS6__GPIO3_22 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) #define MX51_PAD_NANDF_CS6__NANDF_CS6 (_MX51_PAD_NANDF_CS6__NANDF_CS6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_NANDF_CS6__PATA_DA_2 (_MX51_PAD_NANDF_CS6__PATA_DA_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX51_PAD_NANDF_CS6__SD4_DAT3 (_MX51_PAD_NANDF_CS6__SD4_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS6__SD4_DAT3 (_MX51_PAD_NANDF_CS6__SD4_DAT3 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL)) #define MX51_PAD_NANDF_CS7__FEC_TX_EN (_MX51_PAD_NANDF_CS7__FEC_TX_EN | MUX_PAD_CTRL(MX51_PAD_CTRL_5)) #define MX51_PAD_NANDF_CS7__GPIO3_23 (_MX51_PAD_NANDF_CS7__GPIO3_23 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) #define MX51_PAD_NANDF_CS7__NANDF_CS7 (_MX51_PAD_NANDF_CS7__NANDF_CS7 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX51_PAD_NANDF_CS7__SD3_CLK (_MX51_PAD_NANDF_CS7__SD3_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS7__SD3_CLK (_MX51_PAD_NANDF_CS7__SD3_CLK | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)) #define MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 (_MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) #define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK (_MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK | MUX_PAD_CTRL(MX51_PAD_CTRL_4)) #define MX51_PAD_NANDF_RDY_INT__GPIO3_24 (_MX51_PAD_NANDF_RDY_INT__GPIO3_24 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) #define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT (_MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX51_PAD_NANDF_RDY_INT__SD3_CMD (_MX51_PAD_NANDF_RDY_INT__SD3_CMD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RDY_INT__SD3_CMD (_MX51_PAD_NANDF_RDY_INT__SD3_CMD | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL)) #define MX51_PAD_NANDF_D15__ECSPI2_MOSI (_MX51_PAD_NANDF_D15__ECSPI2_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) #define MX51_PAD_NANDF_D15__GPIO3_25 (_MX51_PAD_NANDF_D15__GPIO3_25 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) #define MX51_PAD_NANDF_D15__NANDF_D15 (_MX51_PAD_NANDF_D15__NANDF_D15 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1479,26 +1479,26 @@ #define MX51_PAD_SD1_CLK__SD1_CLK (_MX51_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)) #define MX51_PAD_SD1_DATA0__AUD5_TXD (_MX51_PAD_SD1_DATA0__AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_SD1_DATA0__CSPI_MISO (_MX51_PAD_SD1_DATA0__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) -#define MX51_PAD_SD1_DATA0__SD1_DATA0 (_MX51_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD1_DATA0__SD1_DATA0 (_MX51_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL)) #define MX51_PAD_EIM_DA0__EIM_DA0 (_MX51_PAD_EIM_DA0__EIM_DA0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_EIM_DA1__EIM_DA1 (_MX51_PAD_EIM_DA1__EIM_DA1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_EIM_DA2__EIM_DA2 (_MX51_PAD_EIM_DA2__EIM_DA2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_EIM_DA3__EIM_DA3 (_MX51_PAD_EIM_DA3__EIM_DA3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_SD1_DATA1__AUD5_RXD (_MX51_PAD_SD1_DATA1__AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX51_PAD_SD1_DATA1__SD1_DATA1 (_MX51_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD1_DATA1__SD1_DATA1 (_MX51_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL)) #define MX51_PAD_EIM_DA4__EIM_DA4 (_MX51_PAD_EIM_DA4__EIM_DA4 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_EIM_DA5__EIM_DA5 (_MX51_PAD_EIM_DA5__EIM_DA5 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_EIM_DA6__EIM_DA6 (_MX51_PAD_EIM_DA6__EIM_DA6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_EIM_DA7__EIM_DA7 (_MX51_PAD_EIM_DA7__EIM_DA7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_SD1_DATA2__AUD5_TXC (_MX51_PAD_SD1_DATA2__AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX51_PAD_SD1_DATA2__SD1_DATA2 (_MX51_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD1_DATA2__SD1_DATA2 (_MX51_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL)) #define MX51_PAD_EIM_DA10__EIM_DA10 (_MX51_PAD_EIM_DA10__EIM_DA10 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_EIM_DA11__EIM_DA11 (_MX51_PAD_EIM_DA11__EIM_DA11 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_EIM_DA8__EIM_DA8 (_MX51_PAD_EIM_DA8__EIM_DA8 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_EIM_DA9__EIM_DA9 (_MX51_PAD_EIM_DA9__EIM_DA9 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_SD1_DATA3__AUD5_TXFS (_MX51_PAD_SD1_DATA3__AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_SD1_DATA3__CSPI_SS1 (_MX51_PAD_SD1_DATA3__CSPI_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) -#define MX51_PAD_SD1_DATA3__SD1_DATA3 (_MX51_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD1_DATA3__SD1_DATA3 (_MX51_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL)) #define MX51_PAD_GPIO1_0__CSPI_SS2 (_MX51_PAD_GPIO1_0__CSPI_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) #define MX51_PAD_GPIO1_0__GPIO1_0 (_MX51_PAD_GPIO1_0__GPIO1_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_GPIO1_0__SD1_CD (_MX51_PAD_GPIO1_0__SD1_CD | MUX_PAD_CTRL(MX51_ESDHC_PAD_CTRL)) @@ -1517,16 +1517,16 @@ #define MX51_PAD_SD2_CLK__SD2_CLK (_MX51_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)) #define MX51_PAD_SD2_DATA0__CSPI_MISO (_MX51_PAD_SD2_DATA0__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) #define MX51_PAD_SD2_DATA0__SD1_DAT4 (_MX51_PAD_SD2_DATA0__SD1_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX51_PAD_SD2_DATA0__SD2_DATA0 (_MX51_PAD_SD2_DATA0__SD2_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD2_DATA0__SD2_DATA0 (_MX51_PAD_SD2_DATA0__SD2_DATA0 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL)) #define MX51_PAD_SD2_DATA1__SD1_DAT5 (_MX51_PAD_SD2_DATA1__SD1_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX51_PAD_SD2_DATA1__SD2_DATA1 (_MX51_PAD_SD2_DATA1__SD2_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD2_DATA1__SD2_DATA1 (_MX51_PAD_SD2_DATA1__SD2_DATA1 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL)) #define MX51_PAD_SD2_DATA1__USBH3_H2_DP (_MX51_PAD_SD2_DATA1__USBH3_H2_DP | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_SD2_DATA2__SD1_DAT6 (_MX51_PAD_SD2_DATA2__SD1_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX51_PAD_SD2_DATA2__SD2_DATA2 (_MX51_PAD_SD2_DATA2__SD2_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD2_DATA2__SD2_DATA2 (_MX51_PAD_SD2_DATA2__SD2_DATA2 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL)) #define MX51_PAD_SD2_DATA2__USBH3_H2_DM (_MX51_PAD_SD2_DATA2__USBH3_H2_DM | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_SD2_DATA3__CSPI_SS2 (_MX51_PAD_SD2_DATA3__CSPI_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) #define MX51_PAD_SD2_DATA3__SD1_DAT7 (_MX51_PAD_SD2_DATA3__SD1_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX51_PAD_SD2_DATA3__SD2_DATA3 (_MX51_PAD_SD2_DATA3__SD2_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD2_DATA3__SD2_DATA3 (_MX51_PAD_SD2_DATA3__SD2_DATA3 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL)) #define MX51_PAD_GPIO1_2__CCM_OUT_2 (_MX51_PAD_GPIO1_2__CCM_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_GPIO1_2__GPIO1_2 (_MX51_PAD_GPIO1_2__GPIO1_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX51_PAD_GPIO1_2__I2C2_SCL (_MX51_PAD_GPIO1_2__I2C2_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL)) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h index 68e11d7ab79..e95d9cb8aeb 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,305 +21,2358 @@ #include <mach/iomux-v3.h> -/* - * various IOMUX alternate output functions (1-7) - */ -typedef enum iomux_config { - IOMUX_CONFIG_ALT0, - IOMUX_CONFIG_ALT1, - IOMUX_CONFIG_ALT2, - IOMUX_CONFIG_ALT3, - IOMUX_CONFIG_ALT4, - IOMUX_CONFIG_ALT5, - IOMUX_CONFIG_ALT6, - IOMUX_CONFIG_ALT7, - IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */ -} iomux_pin_cfg_t; - /* These 2 defines are for pins that may not have a mux register, but could * have a pad setting register, and vice-versa. */ -#define NON_MUX_I 0x00 #define NON_PAD_I 0x00 #define MX53_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST | PAD_CTL_HYS) -/* UART1 */ -#define MX53_PAD_CSI0_D10__UART1_TXD IOMUX_PAD(0x414, 0xE8, 2, 0x0, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_CSI0_D11__UART1_RXD IOMUX_PAD(0x418, 0xEC, 2, 0x878, 1, MX53_UART_PAD_CTRL) -#define MX53_PAD_ATA_DIOW__UART1_TXD IOMUX_PAD(0x5F0, 0x270, 3, 0x0, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_ATA_DMACK__UART1_RXD IOMUX_PAD(0x5F4, 0x274, 3, 0x880, 3, MX53_UART_PAD_CTRL) - -/* UART2 */ -#define MX53_PAD_ATA_BUFFER_EN__UART2_RXD IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, MX53_UART_PAD_CTRL) -#define MX53_PAD_ATA_DMARQ__UART2_TXD IOMUX_PAD(0x5F8, 0x278, 3, 0x0, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_ATA_DIOR__UART2_RTS IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, MX53_UART_PAD_CTRL) -#define MX53_PAD_ATA_INTRQ__UART2_CTS IOMUX_PAD(0x600, 0x280, 3, 0x0, 0, MX53_UART_PAD_CTRL) +#define MX53_SDHC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \ + PAD_CTL_SRE_FAST) -/* UART3 */ -#define MX53_PAD_ATA_CS_0__UART3_TXD IOMUX_PAD(0x61C, 0x29C, 4, 0x0, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_ATA_CS_1__UART3_RXD IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, MX53_UART_PAD_CTRL) -#define MX53_PAD_ATA_DA_1__UART3_CTS IOMUX_PAD(0x614, 0x294, 4, 0x0, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_ATA_DA_2__UART3_RTS IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, MX53_UART_PAD_CTRL) +#define _MX53_PAD_GPIO_19__KPP_COL_5 IOMUX_PAD(0x348, 0x20, 0, 0x840, 0, 0) +#define _MX53_PAD_GPIO_19__GPIO4_5 IOMUX_PAD(0x348, 0x20, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_19__CCM_CLKO IOMUX_PAD(0x348, 0x20, 2, 0x0, 0, 0) +#define _MX53_PAD_GPIO_19__SPDIF_OUT1 IOMUX_PAD(0x348, 0x20, 3, 0x0, 0, 0) +#define _MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 IOMUX_PAD(0x348, 0x20, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_19__ECSPI1_RDY IOMUX_PAD(0x348, 0x20, 5, 0x0, 0, 0) +#define _MX53_PAD_GPIO_19__FEC_TDATA_3 IOMUX_PAD(0x348, 0x20, 6, 0x0, 0, 0) +#define _MX53_PAD_GPIO_19__SRC_INT_BOOT IOMUX_PAD(0x348, 0x20,7, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL0__KPP_COL_0 IOMUX_PAD(0x34C, 0x24, o, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL0__GPIO4_6 IOMUX_PAD(0x34C, 0x24, 1, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC IOMUX_PAD(0x34C, 0x24, 2, 0x758, 0, 0) +#define _MX53_PAD_KEY_COL0__UART4_TXD_MUX IOMUX_PAD(0x34C, 0x24, 4, 0x890, 0, 0) +#define _MX53_PAD_KEY_COL0__ECSPI1_SCLK IOMUX_PAD(0x34C, 0x24, 5, 0x79C, 0, 0) +#define _MX53_PAD_KEY_COL0__FEC_RDATA_3 IOMUX_PAD(0x34C, 0x24, 6, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL0__SRC_ANY_PU_RST IOMUX_PAD(0x34C, 0x24, 7, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW0__KPP_ROW_0 IOMUX_PAD(0x350, 0x28, 0, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW0__GPIO4_7 IOMUX_PAD(0x350, 0x28, 1, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD IOMUX_PAD(0x350, 0x28, 2, 0x74C, 0, 0) +#define _MX53_PAD_KEY_ROW0__UART4_RXD_MUX IOMUX_PAD(0x350, 0x28, 4, 0x890, 1, 0) +#define _MX53_PAD_KEY_ROW0__ECSPI1_MOSI IOMUX_PAD(0x350, 0x28, 5, 0x7A4, 0, 0) +#define _MX53_PAD_KEY_ROW0__FEC_TX_ER IOMUX_PAD(0x350, 0x28, 6, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL1__KPP_COL_1 IOMUX_PAD(0x354, 0x2C, 0, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL1__GPIO4_8 IOMUX_PAD(0x354, 0x2C, 1, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS IOMUX_PAD(0x354, 0x2C, 2, 0x75C, 0, 0) +#define _MX53_PAD_KEY_COL1__UART5_TXD_MUX IOMUX_PAD(0x354, 0x2C, 4, 0x898, 0, 0) +#define _MX53_PAD_KEY_COL1__ECSPI1_MISO IOMUX_PAD(0x354, 0x2C, 5, 0x7A0, 0, 0) +#define _MX53_PAD_KEY_COL1__FEC_RX_CLK IOMUX_PAD(0x354, 0x2C, 6, 0x808, 0, 0) +#define _MX53_PAD_KEY_COL1__USBPHY1_TXREADY IOMUX_PAD(0x354, 0x2C, 7, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW1__KPP_ROW_1 IOMUX_PAD(0x358, 0x30, 0, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW1__GPIO4_9 IOMUX_PAD(0x358, 0x30, 1, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD IOMUX_PAD(0x358, 0x30, 2, 0x748, 0, 0) +#define _MX53_PAD_KEY_ROW1__UART5_RXD_MUX IOMUX_PAD(0x358, 0x30, 4, 0x898, 1, 0) +#define _MX53_PAD_KEY_ROW1__ECSPI1_SS0 IOMUX_PAD(0x358, 0x30, 5, 0x7A8, 0, 0) +#define _MX53_PAD_KEY_ROW1__FEC_COL IOMUX_PAD(0x358, 0x30, 6, 0x800, 0, 0) +#define _MX53_PAD_KEY_ROW1__USBPHY1_RXVALID IOMUX_PAD(0x358, 0x30, 7, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL2__KPP_COL_2 IOMUX_PAD(0x35C, 0x34, 0, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL2__GPIO4_10 IOMUX_PAD(0x35C, 0x34, 1, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL2__CAN1_TXCAN IOMUX_PAD(0x35C, 0x34, 2, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL2__FEC_MDIO IOMUX_PAD(0x35C, 0x34, 4, 0x804, 0, 0) +#define _MX53_PAD_KEY_COL2__ECSPI1_SS1 IOMUX_PAD(0x35C, 0x34, 5, 0x7AC, 0, 0) +#define _MX53_PAD_KEY_COL2__FEC_RDATA_2 IOMUX_PAD(0x35C, 0x34, 6, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE IOMUX_PAD(0x35C, 0x34, 7, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW2__KPP_ROW_2 IOMUX_PAD(0x360, 0x38, 0, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW2__GPIO4_11 IOMUX_PAD(0x360, 0x38, 1, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW2__CAN1_RXCAN IOMUX_PAD(0x360, 0x38, 2, 0x760, 0, 0) +#define _MX53_PAD_KEY_ROW2__FEC_MDC IOMUX_PAD(0x360, 0x38, 4, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW2__ECSPI1_SS2 IOMUX_PAD(0x360, 0x38, 5, 0x7B0, 0, 0) +#define _MX53_PAD_KEY_ROW2__FEC_TDATA_2 IOMUX_PAD(0x360, 0x38, 6, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW2__USBPHY1_RXERROR IOMUX_PAD(0x360, 0x38, 7, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL3__KPP_COL_3 IOMUX_PAD(0x364, 0x3C, 0, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL3__GPIO4_12 IOMUX_PAD(0x364, 0x3C, 1, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL3__USBOH3_H2_DP IOMUX_PAD(0x364, 0x3C, 2, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL3__SPDIF_IN1 IOMUX_PAD(0x364, 0x3C, 3, 0x870, 0, 0) +#define _MX53_PAD_KEY_COL3__I2C2_SCL IOMUX_PAD(0x364, 0x3C, 4 | IOMUX_CONFIG_SION, 0x81C, 0, 0) +#define _MX53_PAD_KEY_COL3__ECSPI1_SS3 IOMUX_PAD(0x364, 0x3C, 5, 0x7B4, 0, 0) +#define _MX53_PAD_KEY_COL3__FEC_CRS IOMUX_PAD(0x364, 0x3C, 6, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK IOMUX_PAD(0x364, 0x3C, 7, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW3__KPP_ROW_3 IOMUX_PAD(0x368, 0x40, 0, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW3__GPIO4_13 IOMUX_PAD(0x368, 0x40, 1, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW3__USBOH3_H2_DM IOMUX_PAD(0x368, 0x40, 2, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK IOMUX_PAD(0x368, 0x40, 3, 0x768, 0, 0) +#define _MX53_PAD_KEY_ROW3__I2C2_SDA IOMUX_PAD(0x368, 0x40, 4 | IOMUX_CONFIG_SION, 0x820, 0, 0) +#define _MX53_PAD_KEY_ROW3__OSC32K_32K_OUT IOMUX_PAD(0x368, 0x40, 5, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW3__CCM_PLL4_BYP IOMUX_PAD(0x368, 0x40, 6, 0x77C, 0, 0) +#define _MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 IOMUX_PAD(0x368, 0x40, 7, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL4__KPP_COL_4 IOMUX_PAD(0x36C, 0x44, 0, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL4__GPIO4_14 IOMUX_PAD(0x36C, 0x44, 1, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL4__CAN2_TXCAN IOMUX_PAD(0x36C, 0x44, 2, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL4__IPU_SISG_4 IOMUX_PAD(0x36C, 0x44, 3, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL4__UART5_RTS IOMUX_PAD(0x36C, 0x44, 4, 0x894, 0, 0) +#define _MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC IOMUX_PAD(0x36C, 0x44, 5, 0x89C, 0, 0) +#define _MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 IOMUX_PAD(0x36C, 0x44, 7, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW4__KPP_ROW_4 IOMUX_PAD(0x370, 0x48, 0, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW4__GPIO4_15 IOMUX_PAD(0x370, 0x48, 1, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW4__CAN2_RXCAN IOMUX_PAD(0x370, 0x48, 2, 0x764, 0, 0) +#define _MX53_PAD_KEY_ROW4__IPU_SISG_5 IOMUX_PAD(0x370, 0x48, 3, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW4__UART5_CTS IOMUX_PAD(0x370, 0x48, 4, 0x894, 1, 0) +#define _MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR IOMUX_PAD(0x370, 0x48, 5, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID IOMUX_PAD(0x370, 0x48, 7, 0x0, 0, 0) +#define _MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK IOMUX_PAD(0x378, 0x4C, 0, 0x0, 0, 0) +#define _MX53_PAD_DI0_DISP_CLK__GPIO4_16 IOMUX_PAD(0x378, 0x4C, 1, 0x0, 0, 0) +#define _MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR IOMUX_PAD(0x378, 0x4C, 2, 0x0, 0, 0) +#define _MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 IOMUX_PAD(0x378, 0x4C, 5, 0x0, 0, 0) +#define _MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 IOMUX_PAD(0x378, 0x4C, 6, 0x0, 0, 0) +#define _MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID IOMUX_PAD(0x378, 0x4C, 7, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 IOMUX_PAD(0x37C, 0x50, 0, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN15__GPIO4_17 IOMUX_PAD(0x37C, 0x50, 1, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC IOMUX_PAD(0x37C, 0x50, 2, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 IOMUX_PAD(0x37C, 0x50, 5, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 IOMUX_PAD(0x37C, 0x50, 6, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN15__USBPHY1_BVALID IOMUX_PAD(0x37C, 0x50, 7, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 IOMUX_PAD(0x380, 0x54, 0, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN2__GPIO4_18 IOMUX_PAD(0x380, 0x54, 1, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD IOMUX_PAD(0x380, 0x54, 2, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 IOMUX_PAD(0x380, 0x54, 5, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 IOMUX_PAD(0x380, 0x54, 6, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION IOMUX_PAD(0x380, 0x54, 7, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 IOMUX_PAD(0x384, 0x58, 0, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN3__GPIO4_19 IOMUX_PAD(0x384, 0x58, 1, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS IOMUX_PAD(0x384, 0x58, 2, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 IOMUX_PAD(0x384, 0x58, 5, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 IOMUX_PAD(0x384, 0x58, 6, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN3__USBPHY1_IDDIG IOMUX_PAD(0x384, 0x58, 7, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 IOMUX_PAD(0x388, 0x5C, 0, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN4__GPIO4_20 IOMUX_PAD(0x388, 0x5C, 1, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD IOMUX_PAD(0x388, 0x5C, 2, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN4__ESDHC1_WP IOMUX_PAD(0x388, 0x5C, 3, 0x7FC, 0, 0) +#define _MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD IOMUX_PAD(0x388, 0x5C, 5, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 IOMUX_PAD(0x388, 0x5C, 6, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT IOMUX_PAD(0x388, 0x5C, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 IOMUX_PAD(0x38C, 0x60, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT0__GPIO4_21 IOMUX_PAD(0x38C, 0x60, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT0__CSPI_SCLK IOMUX_PAD(0x38C, 0x60, 2, 0x780, 0, 0) +#define _MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 IOMUX_PAD(0x38C, 0x60, 3, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN IOMUX_PAD(0x38C, 0x60, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 IOMUX_PAD(0x38C, 0x60, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY IOMUX_PAD(0x38C, 0x60, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 IOMUX_PAD(0x390, 0x64, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT1__GPIO4_22 IOMUX_PAD(0x390, 0x64, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT1__CSPI_MOSI IOMUX_PAD(0x390, 0x64, 2, 0x788, 0, 0) +#define _MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 IOMUX_PAD(0x390, 0x64, 3, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL IOMUX_PAD(0x390, 0x64, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 IOMUX_PAD(0x390, 0x64, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID IOMUX_PAD(0x390, 0x64, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 IOMUX_PAD(0x394, 0x68, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT2__GPIO4_23 IOMUX_PAD(0x394, 0x68, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT2__CSPI_MISO IOMUX_PAD(0x394, 0x68, 2, 0x784, 0, 0) +#define _MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 IOMUX_PAD(0x394, 0x68, 3, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE IOMUX_PAD(0x394, 0x68, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 IOMUX_PAD(0x394, 0x68, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE IOMUX_PAD(0x394, 0x68, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 IOMUX_PAD(0x398, 0x6C, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT3__GPIO4_24 IOMUX_PAD(0x398, 0x6C, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT3__CSPI_SS0 IOMUX_PAD(0x398, 0x6C, 2, 0x78C, 0, 0) +#define _MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 IOMUX_PAD(0x398, 0x6C, 3, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR IOMUX_PAD(0x398, 0x6C, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 IOMUX_PAD(0x398, 0x6C, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR IOMUX_PAD(0x398, 0x6C, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 IOMUX_PAD(0x39C, 0x70, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT4__GPIO4_25 IOMUX_PAD(0x39C, 0x70, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT4__CSPI_SS1 IOMUX_PAD(0x39C, 0x70, 2, 0x790, 0, 0) +#define _MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 IOMUX_PAD(0x39C, 0x70, 3, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB IOMUX_PAD(0x39C, 0x70, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 IOMUX_PAD(0x39C, 0x70, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK IOMUX_PAD(0x39C, 0x70, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 IOMUX_PAD(0x3A0, 0x74, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT5__GPIO4_26 IOMUX_PAD(0x3A0, 0x74, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT5__CSPI_SS2 IOMUX_PAD(0x3A0, 0x74, 2, 0x794, 0, 0) +#define _MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 IOMUX_PAD(0x3A0, 0x74, 3, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS IOMUX_PAD(0x3A0, 0x74, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 IOMUX_PAD(0x3A0, 0x74, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 IOMUX_PAD(0x3A0, 0x74, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 IOMUX_PAD(0x3A4, 0x78, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT6__GPIO4_27 IOMUX_PAD(0x3A4, 0x78, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT6__CSPI_SS3 IOMUX_PAD(0x3A4, 0x78, 2, 0x798, 0, 0) +#define _MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 IOMUX_PAD(0x3A4, 0x78, 3, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE IOMUX_PAD(0x3A4, 0x78, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 IOMUX_PAD(0x3A4, 0x78, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 IOMUX_PAD(0x3A4, 0x78, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 IOMUX_PAD(0x3A8, 0x7C, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT7__GPIO4_28 IOMUX_PAD(0x3A8, 0x7C, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT7__CSPI_RDY IOMUX_PAD(0x3A8, 0x7C, 2, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 IOMUX_PAD(0x3A8, 0x7C, 3, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x3A8, 0x7C, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 IOMUX_PAD(0x3A8, 0x7C, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID IOMUX_PAD(0x3A8, 0x7C, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 IOMUX_PAD(0x3AC, 0x80, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT8__GPIO4_29 IOMUX_PAD(0x3AC, 0x80, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT8__PWM1_PWMO IOMUX_PAD(0x3AC, 0x80, 2, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B IOMUX_PAD(0x3AC, 0x80, 3, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x3AC, 0x80, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 IOMUX_PAD(0x3AC, 0x80, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT8__USBPHY2_AVALID IOMUX_PAD(0x3AC, 0x80, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 IOMUX_PAD(0x3B0, 0x84, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT9__GPIO4_30 IOMUX_PAD(0x3B0, 0x84, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT9__PWM2_PWMO IOMUX_PAD(0x3B0, 0x84, 2, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B IOMUX_PAD(0x3B0, 0x84, 3, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x3B0, 0x84, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 IOMUX_PAD(0x3B0, 0x84, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 IOMUX_PAD(0x3B0, 0x84, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 IOMUX_PAD(0x3B4, 0x88, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT10__GPIO4_31 IOMUX_PAD(0x3B4, 0x88, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP IOMUX_PAD(0x3B4, 0x88, 2, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 IOMUX_PAD(0x3B4, 0x88, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 IOMUX_PAD(0x3B4, 0x88, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 IOMUX_PAD(0x3B4, 0x88, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 IOMUX_PAD(0x3B8, 0x8C, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT11__GPIO5_5 IOMUX_PAD(0x3B8, 0x8C, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT IOMUX_PAD(0x3B8, 0x8C, 2, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 IOMUX_PAD(0x3B8, 0x8C, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 IOMUX_PAD(0x3B8, 0x8C, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 IOMUX_PAD(0x3B8, 0x8C, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 IOMUX_PAD(0x3BC, 0x90, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT12__GPIO5_6 IOMUX_PAD(0x3BC, 0x90, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK IOMUX_PAD(0x3BC, 0x90, 2, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 IOMUX_PAD(0x3BC, 0x90, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 IOMUX_PAD(0x3BC, 0x90, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 IOMUX_PAD(0x3BC, 0x90, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 IOMUX_PAD(0x3C0, 0x94, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT13__GPIO5_7 IOMUX_PAD(0x3C0, 0x94, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS IOMUX_PAD(0x3C0, 0x94, 3, 0x754, 0, 0) +#define _MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 IOMUX_PAD(0x3C0, 0x94, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 IOMUX_PAD(0x3C0, 0x94, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 IOMUX_PAD(0x3C0, 0x94, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 IOMUX_PAD(0x3C4, 0x98, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT14__GPIO5_8 IOMUX_PAD(0x3C4, 0x98, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC IOMUX_PAD(0x3C4, 0x98, 3, 0x750, 0, 0) +#define _MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 IOMUX_PAD(0x3C4, 0x98, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 IOMUX_PAD(0x3C4, 0x98, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 IOMUX_PAD(0x3C4, 0x98, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 IOMUX_PAD(0x3C8, 0x9C, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT15__GPIO5_9 IOMUX_PAD(0x3C8, 0x9C, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT15__ECSPI1_SS1 IOMUX_PAD(0x3C8, 0x9C, 2, 0x7AC, 1, 0) +#define _MX53_PAD_DISP0_DAT15__ECSPI2_SS1 IOMUX_PAD(0x3C8, 0x9C, 3, 0x7C8, 0, 0) +#define _MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 IOMUX_PAD(0x3C8, 0x9C, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 IOMUX_PAD(0x3C8, 0x9C, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 IOMUX_PAD(0x3C8, 0x9C, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 IOMUX_PAD(0x3CC, 0xA0, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT16__GPIO5_10 IOMUX_PAD(0x3CC, 0xA0, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT16__ECSPI2_MOSI IOMUX_PAD(0x3CC, 0xA0, 2, 0x7C0, 0, 0) +#define _MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC IOMUX_PAD(0x3CC, 0xA0, 3, 0x758, 1, 0) +#define _MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 IOMUX_PAD(0x3CC, 0xA0, 4, 0x868, 0, 0) +#define _MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 IOMUX_PAD(0x3CC, 0xA0, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 IOMUX_PAD(0x3CC, 0xA0, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 IOMUX_PAD(0x3CC, 0xA0, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 IOMUX_PAD(0x3D0, 0xA4, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT17__GPIO5_11 IOMUX_PAD(0x3D0, 0xA4, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT17__ECSPI2_MISO IOMUX_PAD(0x3D0, 0xA4, 2, 0x7BC, 0, 0) +#define _MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD IOMUX_PAD(0x3D0, 0xA4, 3, 0x74C, 1, 0) +#define _MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 IOMUX_PAD(0x3D0, 0xA4, 4, 0x86C, 0, 0) +#define _MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 IOMUX_PAD(0x3D0, 0xA4, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 IOMUX_PAD(0x3D0, 0xA4, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 IOMUX_PAD(0x3D4, 0xA8, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT18__GPIO5_12 IOMUX_PAD(0x3D4, 0xA8, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT18__ECSPI2_SS0 IOMUX_PAD(0x3D4, 0xA8, 2, 0x7C4, 0, 0) +#define _MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS IOMUX_PAD(0x3D4, 0xA8, 3, 0x75C, 1, 0) +#define _MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS IOMUX_PAD(0x3D4, 0xA8, 4, 0x73C, 0, 0) +#define _MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 IOMUX_PAD(0x3D4, 0xA8, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 IOMUX_PAD(0x3D4, 0xA8, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 IOMUX_PAD(0x3D4, 0xA8, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 IOMUX_PAD(0x3D8, 0xAC, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT19__GPIO5_13 IOMUX_PAD(0x3D8, 0xAC, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT19__ECSPI2_SCLK IOMUX_PAD(0x3D8, 0xAC, 2, 0x7B8, 0, 0) +#define _MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD IOMUX_PAD(0x3D8, 0xAC, 3, 0x748, 1, 0) +#define _MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC IOMUX_PAD(0x3D8, 0xAC, 4, 0x738, 0, 0) +#define _MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 IOMUX_PAD(0x3D8, 0xAC, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 IOMUX_PAD(0x3D8, 0xAC, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 IOMUX_PAD(0x3D8, 0xAC, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 IOMUX_PAD(0x3DC, 0xB0, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT20__GPIO5_14 IOMUX_PAD(0x3DC, 0xB0, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT20__ECSPI1_SCLK IOMUX_PAD(0x3DC, 0xB0, 2, 0x79C, 1, 0) +#define _MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC IOMUX_PAD(0x3DC, 0xB0, 3, 0x740, 0, 0) +#define _MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 IOMUX_PAD(0x3DC, 0xB0, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 IOMUX_PAD(0x3DC, 0xB0, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT20__SATA_PHY_TDI IOMUX_PAD(0x3DC, 0xB0, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 IOMUX_PAD(0x3E0, 0xB4, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT21__GPIO5_15 IOMUX_PAD(0x3E0, 0xB4, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT21__ECSPI1_MOSI IOMUX_PAD(0x3E0, 0xB4, 2, 0x7A4, 1, 0) +#define _MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD IOMUX_PAD(0x3E0, 0xB4, 3, 0x734, 0, 0) +#define _MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 IOMUX_PAD(0x3E0, 0xB4, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 IOMUX_PAD(0x3E0, 0xB4, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT21__SATA_PHY_TDO IOMUX_PAD(0x3E0, 0xB4, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 IOMUX_PAD(0x3E4, 0xB8, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT22__GPIO5_16 IOMUX_PAD(0x3E4, 0xB8, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT22__ECSPI1_MISO IOMUX_PAD(0x3E4, 0xB8, 2, 0x7A0, 1, 0) +#define _MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS IOMUX_PAD(0x3E4, 0xB8, 3, 0x744, 0, 0) +#define _MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 IOMUX_PAD(0x3E4, 0xB8, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 IOMUX_PAD(0x3E4, 0xB8, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT22__SATA_PHY_TCK IOMUX_PAD(0x3E4, 0xB8, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 IOMUX_PAD(0x3E8, 0xBC, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT23__GPIO5_17 IOMUX_PAD(0x3E8, 0xBC, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT23__ECSPI1_SS0 IOMUX_PAD(0x3E8, 0xBC, 2, 0x7A8, 1, 0) +#define _MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD IOMUX_PAD(0x3E8, 0xBC, 3, 0x730, 0, 0) +#define _MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 IOMUX_PAD(0x3E8, 0xBC, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 IOMUX_PAD(0x3E8, 0xBC, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT23__SATA_PHY_TMS IOMUX_PAD(0x3E8, 0xBC, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK IOMUX_PAD(0x3EC, 0xC0, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_PIXCLK__GPIO5_18 IOMUX_PAD(0x3EC, 0xC0, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 IOMUX_PAD(0x3EC, 0xC0, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 IOMUX_PAD(0x3EC, 0xC0, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC IOMUX_PAD(0x3F0, 0xC4, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_MCLK__GPIO5_19 IOMUX_PAD(0x3F0, 0xC4, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK IOMUX_PAD(0x3F0, 0xC4, 2, 0x0, 0, 0) +#define _MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 IOMUX_PAD(0x3F0, 0xC4, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 IOMUX_PAD(0x3F0, 0xC4, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_MCLK__TPIU_TRCTL IOMUX_PAD(0x3F0, 0xC4, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN IOMUX_PAD(0x3F4, 0xC8, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DATA_EN__GPIO5_20 IOMUX_PAD(0x3F4, 0xC8, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 IOMUX_PAD(0x3F4, 0xC8, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 IOMUX_PAD(0x3F4, 0xC8, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK IOMUX_PAD(0x3F4, 0xC8, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC IOMUX_PAD(0x3F8, 0xCC, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_VSYNC__GPIO5_21 IOMUX_PAD(0x3F8, 0xCC, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 IOMUX_PAD(0x3F8, 0xCC, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 IOMUX_PAD(0x3F8, 0xCC, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 IOMUX_PAD(0x3F8, 0xCC, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 IOMUX_PAD(0x3FC, 0xD0, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT4__GPIO5_22 IOMUX_PAD(0x3FC, 0xD0, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT4__KPP_COL_5 IOMUX_PAD(0x3FC, 0xD0, 2, 0x840, 1, 0) +#define _MX53_PAD_CSI0_DAT4__ECSPI1_SCLK IOMUX_PAD(0x3FC, 0xD0, 3, 0x79C, 2, 0) +#define _MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP IOMUX_PAD(0x3FC, 0xD0, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC IOMUX_PAD(0x3FC, 0xD0, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 IOMUX_PAD(0x3FC, 0xD0, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 IOMUX_PAD(0x3FC, 0xD0, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 IOMUX_PAD(0x400, 0xD4, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT5__GPIO5_23 IOMUX_PAD(0x400, 0xD4, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT5__KPP_ROW_5 IOMUX_PAD(0x400, 0xD4, 2, 0x84C, 0, 0) +#define _MX53_PAD_CSI0_DAT5__ECSPI1_MOSI IOMUX_PAD(0x400, 0xD4, 3, 0x7A4, 2, 0) +#define _MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT IOMUX_PAD(0x400, 0xD4, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD IOMUX_PAD(0x400, 0xD4, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 IOMUX_PAD(0x400, 0xD4, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 IOMUX_PAD(0x400, 0xD4, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 IOMUX_PAD(0x404, 0xD8, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT6__GPIO5_24 IOMUX_PAD(0x404, 0xD8, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT6__KPP_COL_6 IOMUX_PAD(0x404, 0xD8, 2, 0x844, 0, 0) +#define _MX53_PAD_CSI0_DAT6__ECSPI1_MISO IOMUX_PAD(0x404, 0xD8, 3, 0x7A0, 2, 0) +#define _MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK IOMUX_PAD(0x404, 0xD8, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS IOMUX_PAD(0x404, 0xD8, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 IOMUX_PAD(0x404, 0xD8, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 IOMUX_PAD(0x404, 0xD8, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 IOMUX_PAD(0x408, 0xDC, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT7__GPIO5_25 IOMUX_PAD(0x408, 0xDC, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT7__KPP_ROW_6 IOMUX_PAD(0x408, 0xDC, 2, 0x850, 0, 0) +#define _MX53_PAD_CSI0_DAT7__ECSPI1_SS0 IOMUX_PAD(0x408, 0xDC, 3, 0x7A8, 2, 0) +#define _MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR IOMUX_PAD(0x408, 0xDC, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD IOMUX_PAD(0x408, 0xDC, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 IOMUX_PAD(0x408, 0xDC, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 IOMUX_PAD(0x408, 0xDC, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 IOMUX_PAD(0x40C, 0xE0, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT8__GPIO5_26 IOMUX_PAD(0x40C, 0xE0, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT8__KPP_COL_7 IOMUX_PAD(0x40C, 0xE0, 2, 0x848, 0, 0) +#define _MX53_PAD_CSI0_DAT8__ECSPI2_SCLK IOMUX_PAD(0x40C, 0xE0, 3, 0x7B8, 1, 0) +#define _MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC IOMUX_PAD(0x40C, 0xE0, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT8__I2C1_SDA IOMUX_PAD(0x40C, 0xE0, 5 | IOMUX_CONFIG_SION, 0x818, 0, 0) +#define _MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 IOMUX_PAD(0x40C, 0xE0, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 IOMUX_PAD(0x40C, 0xE0, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 IOMUX_PAD(0x410, 0xE4, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT9__GPIO5_27 IOMUX_PAD(0x410, 0xE4, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT9__KPP_ROW_7 IOMUX_PAD(0x410, 0xE4, 2, 0x854, 0, 0) +#define _MX53_PAD_CSI0_DAT9__ECSPI2_MOSI IOMUX_PAD(0x410, 0xE4, 3, 0x7C0, 1, 0) +#define _MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR IOMUX_PAD(0x410, 0xE4, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT9__I2C1_SCL IOMUX_PAD(0x410, 0xE4, 5 | IOMUX_CONFIG_SION, 0x814, 0, 0) +#define _MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 IOMUX_PAD(0x410, 0xE4, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 IOMUX_PAD(0x410, 0xE4, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 IOMUX_PAD(0x414, 0xE8, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT10__GPIO5_28 IOMUX_PAD(0x414, 0xE8, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT10__UART1_TXD_MUX IOMUX_PAD(0x414, 0xE8, 2, 0x878, 0, 0) +#define _MX53_PAD_CSI0_DAT10__ECSPI2_MISO IOMUX_PAD(0x414, 0xE8, 3, 0x7BC, 1, 0) +#define _MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC IOMUX_PAD(0x414, 0xE8, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 IOMUX_PAD(0x414, 0xE8, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 IOMUX_PAD(0x414, 0xE8, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 IOMUX_PAD(0x414, 0xE8, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 IOMUX_PAD(0x418, 0xEC, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT11__GPIO5_29 IOMUX_PAD(0x418, 0xEC, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT11__UART1_RXD_MUX IOMUX_PAD(0x418, 0xEC, 2, 0x878, 1, 0) +#define _MX53_PAD_CSI0_DAT11__ECSPI2_SS0 IOMUX_PAD(0x418, 0xEC, 3, 0x7C4, 1, 0) +#define _MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS IOMUX_PAD(0x418, 0xEC, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 IOMUX_PAD(0x418, 0xEC, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 IOMUX_PAD(0x418, 0xEC, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 IOMUX_PAD(0x418, 0xEC, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 IOMUX_PAD(0x41C, 0xF0, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT12__GPIO5_30 IOMUX_PAD(0x41C, 0xF0, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT12__UART4_TXD_MUX IOMUX_PAD(0x41C, 0xF0, 2, 0x890, 2, 0) +#define _MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 IOMUX_PAD(0x41C, 0xF0, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 IOMUX_PAD(0x41C, 0xF0, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 IOMUX_PAD(0x41C, 0xF0, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 IOMUX_PAD(0x41C, 0xF0, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 IOMUX_PAD(0x420, 0xF4, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT13__GPIO5_31 IOMUX_PAD(0x420, 0xF4, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT13__UART4_RXD_MUX IOMUX_PAD(0x420, 0xF4, 2, 0x890, 3, 0) +#define _MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 IOMUX_PAD(0x420, 0xF4, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 IOMUX_PAD(0x420, 0xF4, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 IOMUX_PAD(0x420, 0xF4, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 IOMUX_PAD(0x420, 0xF4, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 IOMUX_PAD(0x424, 0xF8, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT14__GPIO6_0 IOMUX_PAD(0x424, 0xF8, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT14__UART5_TXD_MUX IOMUX_PAD(0x424, 0xF8, 2, 0x898, 2, 0) +#define _MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 IOMUX_PAD(0x424, 0xF8, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 IOMUX_PAD(0x424, 0xF8, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 IOMUX_PAD(0x424, 0xF8, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 IOMUX_PAD(0x424, 0xF8, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 IOMUX_PAD(0x428, 0xFC, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT15__GPIO6_1 IOMUX_PAD(0x428, 0xFC, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT15__UART5_RXD_MUX IOMUX_PAD(0x428, 0xFC, 2, 0x898, 3, 0) +#define _MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 IOMUX_PAD(0x428, 0xFC, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 IOMUX_PAD(0x428, 0xFC, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 IOMUX_PAD(0x428, 0xFC, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 IOMUX_PAD(0x428, 0xFC, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 IOMUX_PAD(0x42C, 0x100, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT16__GPIO6_2 IOMUX_PAD(0x42C, 0x100, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT16__UART4_RTS IOMUX_PAD(0x42C, 0x100, 2, 0x88C, 0, 0) +#define _MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 IOMUX_PAD(0x42C, 0x100, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 IOMUX_PAD(0x42C, 0x100, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 IOMUX_PAD(0x42C, 0x100, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 IOMUX_PAD(0x42C, 0x100, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 IOMUX_PAD(0x430, 0x104, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT17__GPIO6_3 IOMUX_PAD(0x430, 0x104, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT17__UART4_CTS IOMUX_PAD(0x430, 0x104, 2, 0x88C, 1, 0) +#define _MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 IOMUX_PAD(0x430, 0x104, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 IOMUX_PAD(0x430, 0x104, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 IOMUX_PAD(0x430, 0x104, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 IOMUX_PAD(0x430, 0x104, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 IOMUX_PAD(0x434, 0x108, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT18__GPIO6_4 IOMUX_PAD(0x434, 0x108, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT18__UART5_RTS IOMUX_PAD(0x434, 0x108, 2, 0x894, 2, 0) +#define _MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 IOMUX_PAD(0x434, 0x108, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 IOMUX_PAD(0x434, 0x108, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 IOMUX_PAD(0x434, 0x108, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 IOMUX_PAD(0x434, 0x108, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 IOMUX_PAD(0x438, 0x10C, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT19__GPIO6_5 IOMUX_PAD(0x438, 0x10C, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT19__UART5_CTS IOMUX_PAD(0x438, 0x10C, 2, 0x894, 3, 0) +#define _MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 IOMUX_PAD(0x438, 0x10C, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 IOMUX_PAD(0x438, 0x10C, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 IOMUX_PAD(0x438, 0x10C, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK IOMUX_PAD(0x438, 0x10C, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_A25__EMI_WEIM_A_25 IOMUX_PAD(0x458, 0x110, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_A25__GPIO5_2 IOMUX_PAD(0x458, 0x110, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_A25__ECSPI2_RDY IOMUX_PAD(0x458, 0x110, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_A25__IPU_DI1_PIN12 IOMUX_PAD(0x458, 0x110, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_A25__CSPI_SS1 IOMUX_PAD(0x458, 0x110, 4, 0x790, 1, 0) +#define _MX53_PAD_EIM_A25__IPU_DI0_D1_CS IOMUX_PAD(0x458, 0x110, 6, 0x0, 0, 0) +#define _MX53_PAD_EIM_A25__USBPHY1_BISTOK IOMUX_PAD(0x458, 0x110, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 IOMUX_PAD(0x45C, 0x114, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB2__GPIO2_30 IOMUX_PAD(0x45C, 0x114, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK IOMUX_PAD(0x45C, 0x114, 2, 0x76C, 0, 0) +#define _MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS IOMUX_PAD(0x45C, 0x114, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB2__ECSPI1_SS0 IOMUX_PAD(0x45C, 0x114, 4, 0x7A8, 3, 0) +#define _MX53_PAD_EIM_EB2__I2C2_SCL IOMUX_PAD(0x45C, 0x114, 5 | IOMUX_CONFIG_SION, 0x81C, 1, 0) +#define _MX53_PAD_EIM_D16__EMI_WEIM_D_16 IOMUX_PAD(0x460, 0x118, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D16__GPIO3_16 IOMUX_PAD(0x460, 0x118, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D16__IPU_DI0_PIN5 IOMUX_PAD(0x460, 0x118, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK IOMUX_PAD(0x460, 0x118, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_D16__ECSPI1_SCLK IOMUX_PAD(0x460, 0x118, 4, 0x79C, 3, 0) +#define _MX53_PAD_EIM_D16__I2C2_SDA IOMUX_PAD(0x460, 0x118, 5, 0x820, 1, 0) +#define _MX53_PAD_EIM_D17__EMI_WEIM_D_17 IOMUX_PAD(0x464, 0x11C, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D17__GPIO3_17 IOMUX_PAD(0x464, 0x11C, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D17__IPU_DI0_PIN6 IOMUX_PAD(0x464, 0x11C, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN IOMUX_PAD(0x464, 0x11C, 3, 0x830, 0, 0) +#define _MX53_PAD_EIM_D17__ECSPI1_MISO IOMUX_PAD(0x464, 0x11C, 4, 0x7A0, 3, 0) +#define _MX53_PAD_EIM_D17__I2C3_SCL IOMUX_PAD(0x464, 0x11C, 5, 0x824, 0, 0) +#define _MX53_PAD_EIM_D18__EMI_WEIM_D_18 IOMUX_PAD(0x468, 0x120, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D18__GPIO3_18 IOMUX_PAD(0x468, 0x120, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D18__IPU_DI0_PIN7 IOMUX_PAD(0x468, 0x120, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO IOMUX_PAD(0x468, 0x120, 3, 0x830, 1, 0) +#define _MX53_PAD_EIM_D18__ECSPI1_MOSI IOMUX_PAD(0x468, 0x120, 4, 0x7A4, 3, 0) +#define _MX53_PAD_EIM_D18__I2C3_SDA IOMUX_PAD(0x468, 0x120, 5, 0x828, 0, 0) +#define _MX53_PAD_EIM_D18__IPU_DI1_D0_CS IOMUX_PAD(0x468, 0x120, 6, 0x0, 0, 0) +#define _MX53_PAD_EIM_D19__EMI_WEIM_D_19 IOMUX_PAD(0x46C, 0x124, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D19__GPIO3_19 IOMUX_PAD(0x46C, 0x124, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D19__IPU_DI0_PIN8 IOMUX_PAD(0x46C, 0x124, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS IOMUX_PAD(0x46C, 0x124, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_D19__ECSPI1_SS1 IOMUX_PAD(0x46C, 0x124, 4, 0x7AC, 2, 0) +#define _MX53_PAD_EIM_D19__EPIT1_EPITO IOMUX_PAD(0x46C, 0x124, 5, 0x0, 0, 0) +#define _MX53_PAD_EIM_D19__UART1_CTS IOMUX_PAD(0x46C, 0x124, 6, 0x874, 0, 0) +#define _MX53_PAD_EIM_D19__USBOH3_USBH2_OC IOMUX_PAD(0x46C, 0x124, 7, 0x8A4, 0, 0) +#define _MX53_PAD_EIM_D20__EMI_WEIM_D_20 IOMUX_PAD(0x470, 0x128, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D20__GPIO3_20 IOMUX_PAD(0x470, 0x128, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D20__IPU_DI0_PIN16 IOMUX_PAD(0x470, 0x128, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_D20__IPU_SER_DISP0_CS IOMUX_PAD(0x470, 0x128, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_D20__CSPI_SS0 IOMUX_PAD(0x470, 0x128, 4, 0x78C, 1, 0) +#define _MX53_PAD_EIM_D20__EPIT2_EPITO IOMUX_PAD(0x470, 0x128, 5, 0x0, 0, 0) +#define _MX53_PAD_EIM_D20__UART1_RTS IOMUX_PAD(0x470, 0x128, 6, 0x874, 1, 0) +#define _MX53_PAD_EIM_D20__USBOH3_USBH2_PWR IOMUX_PAD(0x470, 0x128, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_D21__EMI_WEIM_D_21 IOMUX_PAD(0x474, 0x12C, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D21__GPIO3_21 IOMUX_PAD(0x474, 0x12C, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D21__IPU_DI0_PIN17 IOMUX_PAD(0x474, 0x12C, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK IOMUX_PAD(0x474, 0x12C, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_D21__CSPI_SCLK IOMUX_PAD(0x474, 0x12C, 4, 0x780, 1, 0) +#define _MX53_PAD_EIM_D21__I2C1_SCL IOMUX_PAD(0x474, 0x12C, 5, 0x814, 1, 0) +#define _MX53_PAD_EIM_D21__USBOH3_USBOTG_OC IOMUX_PAD(0x474, 0x12C, 6, 0x89C, 1, 0) +#define _MX53_PAD_EIM_D22__EMI_WEIM_D_22 IOMUX_PAD(0x478, 0x130, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D22__GPIO3_22 IOMUX_PAD(0x478, 0x130, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D22__IPU_DI0_PIN1 IOMUX_PAD(0x478, 0x130, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN IOMUX_PAD(0x478, 0x130, 3, 0x82C, 0, 0) +#define _MX53_PAD_EIM_D22__CSPI_MISO IOMUX_PAD(0x478, 0x130, 4, 0x784, 1, 0) +#define _MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR IOMUX_PAD(0x478, 0x130, 6, 0x0, 0, 0) +#define _MX53_PAD_EIM_D23__EMI_WEIM_D_23 IOMUX_PAD(0x47C, 0x134, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D23__GPIO3_23 IOMUX_PAD(0x47C, 0x134, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D23__UART3_CTS IOMUX_PAD(0x47C, 0x134, 2, 0x884, 0, 0) +#define _MX53_PAD_EIM_D23__UART1_DCD IOMUX_PAD(0x47C, 0x134, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_D23__IPU_DI0_D0_CS IOMUX_PAD(0x47C, 0x134, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_D23__IPU_DI1_PIN2 IOMUX_PAD(0x47C, 0x134, 5, 0x0, 0, 0) +#define _MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN IOMUX_PAD(0x47C, 0x134, 6, 0x834, 0, 0) +#define _MX53_PAD_EIM_D23__IPU_DI1_PIN14 IOMUX_PAD(0x47C, 0x134, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 IOMUX_PAD(0x480, 0x138, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB3__GPIO2_31 IOMUX_PAD(0x480, 0x138, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB3__UART3_RTS IOMUX_PAD(0x480, 0x138, 2, 0x884, 1, 0) +#define _MX53_PAD_EIM_EB3__UART1_RI IOMUX_PAD(0x480, 0x138, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB3__IPU_DI1_PIN3 IOMUX_PAD(0x480, 0x138, 5, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC IOMUX_PAD(0x480, 0x138, 6, 0x838, 0, 0) +#define _MX53_PAD_EIM_EB3__IPU_DI1_PIN16 IOMUX_PAD(0x480, 0x138, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_D24__EMI_WEIM_D_24 IOMUX_PAD(0x484, 0x13C, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D24__GPIO3_24 IOMUX_PAD(0x484, 0x13C, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D24__UART3_TXD_MUX IOMUX_PAD(0x484, 0x13C, 2, 0x888, 0, 0) +#define _MX53_PAD_EIM_D24__ECSPI1_SS2 IOMUX_PAD(0x484, 0x13C, 3, 0x7B0, 1, 0) +#define _MX53_PAD_EIM_D24__CSPI_SS2 IOMUX_PAD(0x484, 0x13C, 4, 0x794, 1, 0) +#define _MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS IOMUX_PAD(0x484, 0x13C, 5, 0x754, 1, 0) +#define _MX53_PAD_EIM_D24__ECSPI2_SS2 IOMUX_PAD(0x484, 0x13C, 6, 0x0, 0, 0) +#define _MX53_PAD_EIM_D24__UART1_DTR IOMUX_PAD(0x484, 0x13C, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_D25__EMI_WEIM_D_25 IOMUX_PAD(0x488, 0x140, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D25__GPIO3_25 IOMUX_PAD(0x488, 0x140, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D25__UART3_RXD_MUX IOMUX_PAD(0x488, 0x140, 2, 0x888, 1, 0) +#define _MX53_PAD_EIM_D25__ECSPI1_SS3 IOMUX_PAD(0x488, 0x140, 3, 0x7B4, 1, 0) +#define _MX53_PAD_EIM_D25__CSPI_SS3 IOMUX_PAD(0x488, 0x140, 4, 0x798, 1, 0) +#define _MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC IOMUX_PAD(0x488, 0x140, 5, 0x750, 1, 0) +#define _MX53_PAD_EIM_D25__ECSPI2_SS3 IOMUX_PAD(0x488, 0x140, 6, 0x0, 0, 0) +#define _MX53_PAD_EIM_D25__UART1_DSR IOMUX_PAD(0x488, 0x140, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_D26__EMI_WEIM_D_26 IOMUX_PAD(0x48C, 0x144, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D26__GPIO3_26 IOMUX_PAD(0x48C, 0x144, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D26__UART2_TXD_MUX IOMUX_PAD(0x48C, 0x144, 2, 0x880, 0, 0) +#define _MX53_PAD_EIM_D26__FIRI_RXD IOMUX_PAD(0x48C, 0x144, 3, 0x80C, 0, 0) +#define _MX53_PAD_EIM_D26__IPU_CSI0_D_1 IOMUX_PAD(0x48C, 0x144, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_D26__IPU_DI1_PIN11 IOMUX_PAD(0x48C, 0x144, 5, 0x0, 0, 0) +#define _MX53_PAD_EIM_D26__IPU_SISG_2 IOMUX_PAD(0x48C, 0x144, 6, 0x0, 0, 0) +#define _MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 IOMUX_PAD(0x48C, 0x144, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_D27__EMI_WEIM_D_27 IOMUX_PAD(0x490, 0x148, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D27__GPIO3_27 IOMUX_PAD(0x490, 0x148, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D27__UART2_RXD_MUX IOMUX_PAD(0x490, 0x148, 2, 0x880, 1, 0) +#define _MX53_PAD_EIM_D27__FIRI_TXD IOMUX_PAD(0x490, 0x148, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_D27__IPU_CSI0_D_0 IOMUX_PAD(0x490, 0x148, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_D27__IPU_DI1_PIN13 IOMUX_PAD(0x490, 0x148, 5, 0x0, 0, 0) +#define _MX53_PAD_EIM_D27__IPU_SISG_3 IOMUX_PAD(0x490, 0x148, 6, 0x0, 0, 0) +#define _MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 IOMUX_PAD(0x490, 0x148, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_D28__EMI_WEIM_D_28 IOMUX_PAD(0x494, 0x14C, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D28__GPIO3_28 IOMUX_PAD(0x494, 0x14C, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D28__UART2_CTS IOMUX_PAD(0x494, 0x14C, 2, 0x87C, 0, 0) +#define _MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, 0) +#define _MX53_PAD_EIM_D28__CSPI_MOSI IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, 0) +#define _MX53_PAD_EIM_D28__I2C1_SDA IOMUX_PAD(0x494, 0x14C, 5, 0x818, 1, 0) +#define _MX53_PAD_EIM_D28__IPU_EXT_TRIG IOMUX_PAD(0x494, 0x14C, 6, 0x0, 0, 0) +#define _MX53_PAD_EIM_D28__IPU_DI0_PIN13 IOMUX_PAD(0x494, 0x14C, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_D29__EMI_WEIM_D_29 IOMUX_PAD(0x498, 0x150, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D29__GPIO3_29 IOMUX_PAD(0x498, 0x150, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D29__UART2_RTS IOMUX_PAD(0x498, 0x150, 2, 0x87C, 1, 0) +#define _MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS IOMUX_PAD(0x498, 0x150, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_D29__CSPI_SS0 IOMUX_PAD(0x498, 0x150, 4, 0x78C, 2, 0) +#define _MX53_PAD_EIM_D29__IPU_DI1_PIN15 IOMUX_PAD(0x498, 0x150, 5, 0x0, 0, 0) +#define _MX53_PAD_EIM_D29__IPU_CSI1_VSYNC IOMUX_PAD(0x498, 0x150, 6, 0x83C, 0, 0) +#define _MX53_PAD_EIM_D29__IPU_DI0_PIN14 IOMUX_PAD(0x498, 0x150, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_D30__EMI_WEIM_D_30 IOMUX_PAD(0x49C, 0x154, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D30__GPIO3_30 IOMUX_PAD(0x49C, 0x154, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D30__UART3_CTS IOMUX_PAD(0x49C, 0x154, 2, 0x884, 2, 0) +#define _MX53_PAD_EIM_D30__IPU_CSI0_D_3 IOMUX_PAD(0x49C, 0x154, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_D30__IPU_DI0_PIN11 IOMUX_PAD(0x49C, 0x154, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 IOMUX_PAD(0x49C, 0x154, 5, 0x0, 0, 0) +#define _MX53_PAD_EIM_D30__USBOH3_USBH1_OC IOMUX_PAD(0x49C, 0x154, 6, 0x8A0, 0, 0) +#define _MX53_PAD_EIM_D30__USBOH3_USBH2_OC IOMUX_PAD(0x49C, 0x154, 7, 0x8A4, 1, 0) +#define _MX53_PAD_EIM_D31__EMI_WEIM_D_31 IOMUX_PAD(0x4A0, 0x158, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D31__GPIO3_31 IOMUX_PAD(0x4A0, 0x158, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D31__UART3_RTS IOMUX_PAD(0x4A0, 0x158, 2, 0x884, 3, 0) +#define _MX53_PAD_EIM_D31__IPU_CSI0_D_2 IOMUX_PAD(0x4A0, 0x158, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_D31__IPU_DI0_PIN12 IOMUX_PAD(0x4A0, 0x158, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 IOMUX_PAD(0x4A0, 0x158, 5, 0x0, 0, 0) +#define _MX53_PAD_EIM_D31__USBOH3_USBH1_PWR IOMUX_PAD(0x4A0, 0x158, 6, 0x0, 0, 0) +#define _MX53_PAD_EIM_D31__USBOH3_USBH2_PWR IOMUX_PAD(0x4A0, 0x158, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_A24__EMI_WEIM_A_24 IOMUX_PAD(0x4A8, 0x15C, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_A24__GPIO5_4 IOMUX_PAD(0x4A8, 0x15C, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 IOMUX_PAD(0x4A8, 0x15C, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_A24__IPU_CSI1_D_19 IOMUX_PAD(0x4A8, 0x15C, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_A24__IPU_SISG_2 IOMUX_PAD(0x4A8, 0x15C, 6, 0x0, 0, 0) +#define _MX53_PAD_EIM_A24__USBPHY2_BVALID IOMUX_PAD(0x4A8, 0x15C, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_A23__EMI_WEIM_A_23 IOMUX_PAD(0x4AC, 0x160, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_A23__GPIO6_6 IOMUX_PAD(0x4AC, 0x160, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 IOMUX_PAD(0x4AC, 0x160, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_A23__IPU_CSI1_D_18 IOMUX_PAD(0x4AC, 0x160, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_A23__IPU_SISG_3 IOMUX_PAD(0x4AC, 0x160, 6, 0x0, 0, 0) +#define _MX53_PAD_EIM_A23__USBPHY2_ENDSESSION IOMUX_PAD(0x4AC, 0x160, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_A22__EMI_WEIM_A_22 IOMUX_PAD(0x4B0, 0x164, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_A22__GPIO2_16 IOMUX_PAD(0x4B0, 0x164, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 IOMUX_PAD(0x4B0, 0x164, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_A22__IPU_CSI1_D_17 IOMUX_PAD(0x4B0, 0x164, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_A22__SRC_BT_CFG1_7 IOMUX_PAD(0x4B0, 0x164, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_A21__EMI_WEIM_A_21 IOMUX_PAD(0x4B4, 0x168, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_A21__GPIO2_17 IOMUX_PAD(0x4B4, 0x168, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 IOMUX_PAD(0x4B4, 0x168, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_A21__IPU_CSI1_D_16 IOMUX_PAD(0x4B4, 0x168, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_A21__SRC_BT_CFG1_6 IOMUX_PAD(0x4B4, 0x168, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_A20__EMI_WEIM_A_20 IOMUX_PAD(0x4B8, 0x16C, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_A20__GPIO2_18 IOMUX_PAD(0x4B8, 0x16C, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 IOMUX_PAD(0x4B8, 0x16C, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_A20__IPU_CSI1_D_15 IOMUX_PAD(0x4B8, 0x16C, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_A20__SRC_BT_CFG1_5 IOMUX_PAD(0x4B8, 0x16C, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_A19__EMI_WEIM_A_19 IOMUX_PAD(0x4BC, 0x170, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_A19__GPIO2_19 IOMUX_PAD(0x4BC, 0x170, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 IOMUX_PAD(0x4BC, 0x170, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_A19__IPU_CSI1_D_14 IOMUX_PAD(0x4BC, 0x170, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_A19__SRC_BT_CFG1_4 IOMUX_PAD(0x4BC, 0x170, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_A18__EMI_WEIM_A_18 IOMUX_PAD(0x4C0, 0x174, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_A18__GPIO2_20 IOMUX_PAD(0x4C0, 0x174, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 IOMUX_PAD(0x4C0, 0x174, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_A18__IPU_CSI1_D_13 IOMUX_PAD(0x4C0, 0x174, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_A18__SRC_BT_CFG1_3 IOMUX_PAD(0x4C0, 0x174, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_A17__EMI_WEIM_A_17 IOMUX_PAD(0x4C4, 0x178, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_A17__GPIO2_21 IOMUX_PAD(0x4C4, 0x178, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 IOMUX_PAD(0x4C4, 0x178, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_A17__IPU_CSI1_D_12 IOMUX_PAD(0x4C4, 0x178, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_A17__SRC_BT_CFG1_2 IOMUX_PAD(0x4C4, 0x178, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_A16__EMI_WEIM_A_16 IOMUX_PAD(0x4C8, 0x17C, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_A16__GPIO2_22 IOMUX_PAD(0x4C8, 0x17C, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK IOMUX_PAD(0x4C8, 0x17C, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK IOMUX_PAD(0x4C8, 0x17C, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_A16__SRC_BT_CFG1_1 IOMUX_PAD(0x4C8, 0x17C, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 IOMUX_PAD(0x4CC, 0x180, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_CS0__GPIO2_23 IOMUX_PAD(0x4CC, 0x180, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_CS0__ECSPI2_SCLK IOMUX_PAD(0x4CC, 0x180, 2, 0x7B8, 2, 0) +#define _MX53_PAD_EIM_CS0__IPU_DI1_PIN5 IOMUX_PAD(0x4CC, 0x180, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 IOMUX_PAD(0x4D0, 0x184, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_CS1__GPIO2_24 IOMUX_PAD(0x4D0, 0x184, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_CS1__ECSPI2_MOSI IOMUX_PAD(0x4D0, 0x184, 2, 0x7C0, 2, 0) +#define _MX53_PAD_EIM_CS1__IPU_DI1_PIN6 IOMUX_PAD(0x4D0, 0x184, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_OE__EMI_WEIM_OE IOMUX_PAD(0x4D4, 0x188, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_OE__GPIO2_25 IOMUX_PAD(0x4D4, 0x188, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_OE__ECSPI2_MISO IOMUX_PAD(0x4D4, 0x188, 2, 0x7BC, 2, 0) +#define _MX53_PAD_EIM_OE__IPU_DI1_PIN7 IOMUX_PAD(0x4D4, 0x188, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_OE__USBPHY2_IDDIG IOMUX_PAD(0x4D4, 0x188, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_RW__EMI_WEIM_RW IOMUX_PAD(0x4D8, 0x18C, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_RW__GPIO2_26 IOMUX_PAD(0x4D8, 0x18C, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_RW__ECSPI2_SS0 IOMUX_PAD(0x4D8, 0x18C, 2, 0x7C4, 2, 0) +#define _MX53_PAD_EIM_RW__IPU_DI1_PIN8 IOMUX_PAD(0x4D8, 0x18C, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT IOMUX_PAD(0x4D8, 0x18C, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_LBA__EMI_WEIM_LBA IOMUX_PAD(0x4DC, 0x190, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_LBA__GPIO2_27 IOMUX_PAD(0x4DC, 0x190, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_LBA__ECSPI2_SS1 IOMUX_PAD(0x4DC, 0x190, 2, 0x7C8, 1, 0) +#define _MX53_PAD_EIM_LBA__IPU_DI1_PIN17 IOMUX_PAD(0x4DC, 0x190, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 IOMUX_PAD(0x4DC, 0x190, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 IOMUX_PAD(0x4E4, 0x194, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB0__GPIO2_28 IOMUX_PAD(0x4E4, 0x194, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 IOMUX_PAD(0x4E4, 0x194, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB0__IPU_CSI1_D_11 IOMUX_PAD(0x4E4, 0x194, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB0__GPC_PMIC_RDY IOMUX_PAD(0x4E4, 0x194, 5, 0x810, 0, 0) +#define _MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 IOMUX_PAD(0x4E4, 0x194, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 IOMUX_PAD(0x4E8, 0x198, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB1__GPIO2_29 IOMUX_PAD(0x4E8, 0x198, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 IOMUX_PAD(0x4E8, 0x198, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB1__IPU_CSI1_D_10 IOMUX_PAD(0x4E8, 0x198, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 IOMUX_PAD(0x4E8, 0x198, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 IOMUX_PAD(0x4EC, 0x19C, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA0__GPIO3_0 IOMUX_PAD(0x4EC, 0x19C, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 IOMUX_PAD(0x4EC, 0x19C, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA0__IPU_CSI1_D_9 IOMUX_PAD(0x4EC, 0x19C, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 IOMUX_PAD(0x4EC, 0x19C, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 IOMUX_PAD(0x4F0, 0x1A0, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA1__GPIO3_1 IOMUX_PAD(0x4F0, 0x1A0, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 IOMUX_PAD(0x4F0, 0x1A0, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA1__IPU_CSI1_D_8 IOMUX_PAD(0x4F0, 0x1A0, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 IOMUX_PAD(0x4F0, 0x1A0, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 IOMUX_PAD(0x4F4, 0x1A4, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA2__GPIO3_2 IOMUX_PAD(0x4F4, 0x1A4, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 IOMUX_PAD(0x4F4, 0x1A4, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA2__IPU_CSI1_D_7 IOMUX_PAD(0x4F4, 0x1A4, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 IOMUX_PAD(0x4F4, 0x1A4, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 IOMUX_PAD(0x4F8, 0x1A8, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA3__GPIO3_3 IOMUX_PAD(0x4F8, 0x1A8, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 IOMUX_PAD(0x4F8, 0x1A8, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA3__IPU_CSI1_D_6 IOMUX_PAD(0x4F8, 0x1A8, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 IOMUX_PAD(0x4F8, 0x1A8, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 IOMUX_PAD(0x4FC, 0x1AC, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA4__GPIO3_4 IOMUX_PAD(0x4FC, 0x1AC, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 IOMUX_PAD(0x4FC, 0x1AC, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA4__IPU_CSI1_D_5 IOMUX_PAD(0x4FC, 0x1AC, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 IOMUX_PAD(0x4FC, 0x1AC, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 IOMUX_PAD(0x500, 0x1B0, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA5__GPIO3_5 IOMUX_PAD(0x500, 0x1B0, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 IOMUX_PAD(0x500, 0x1B0, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA5__IPU_CSI1_D_4 IOMUX_PAD(0x500, 0x1B0, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 IOMUX_PAD(0x500, 0x1B0, 17, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 IOMUX_PAD(0x504, 0x1B4, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA6__GPIO3_6 IOMUX_PAD(0x504, 0x1B4, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 IOMUX_PAD(0x504, 0x1B4, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA6__IPU_CSI1_D_3 IOMUX_PAD(0x504, 0x1B4, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 IOMUX_PAD(0x504, 0x1B4, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 IOMUX_PAD(0x508, 0x1B8, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA7__GPIO3_7 IOMUX_PAD(0x508, 0x1B8, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 IOMUX_PAD(0x508, 0x1B8, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA7__IPU_CSI1_D_2 IOMUX_PAD(0x508, 0x1B8, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 IOMUX_PAD(0x508, 0x1B8, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 IOMUX_PAD(0x50C, 0x1BC, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA8__GPIO3_8 IOMUX_PAD(0x50C, 0x1BC, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 IOMUX_PAD(0x50C, 0x1BC, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA8__IPU_CSI1_D_1 IOMUX_PAD(0x50C, 0x1BC, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 IOMUX_PAD(0x50C, 0x1BC, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 IOMUX_PAD(0x510, 0x1C0, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA9__GPIO3_9 IOMUX_PAD(0x510, 0x1C0, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 IOMUX_PAD(0x510, 0x1C0, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA9__IPU_CSI1_D_0 IOMUX_PAD(0x510, 0x1C0, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 IOMUX_PAD(0x510, 0x1C0, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 IOMUX_PAD(0x514, 0x1C4, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA10__GPIO3_10 IOMUX_PAD(0x514, 0x1C4, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA10__IPU_DI1_PIN15 IOMUX_PAD(0x514, 0x1C4, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN IOMUX_PAD(0x514, 0x1C4, 4, 0x834, 1, 0) +#define _MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 IOMUX_PAD(0x514, 0x1C4, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 IOMUX_PAD(0x518, 0x1C8, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA11__GPIO3_11 IOMUX_PAD(0x518, 0x1C8, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA11__IPU_DI1_PIN2 IOMUX_PAD(0x518, 0x1C8, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC IOMUX_PAD(0x518, 0x1C8, 4, 0x838, 1, 0) +#define _MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 IOMUX_PAD(0x51C, 0x1CC, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA12__GPIO3_12 IOMUX_PAD(0x51C, 0x1CC, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA12__IPU_DI1_PIN3 IOMUX_PAD(0x51C, 0x1CC, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC IOMUX_PAD(0x51C, 0x1CC, 4, 0x83C, 1, 0) +#define _MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 IOMUX_PAD(0x520, 0x1D0, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA13__GPIO3_13 IOMUX_PAD(0x520, 0x1D0, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA13__IPU_DI1_D0_CS IOMUX_PAD(0x520, 0x1D0, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK IOMUX_PAD(0x520, 0x1D0, 4, 0x76C, 1, 0) +#define _MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 IOMUX_PAD(0x524, 0x1D4, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA14__GPIO3_14 IOMUX_PAD(0x524, 0x1D4, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA14__IPU_DI1_D1_CS IOMUX_PAD(0x524, 0x1D4, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK IOMUX_PAD(0x524, 0x1D4, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 IOMUX_PAD(0x528, 0x1D8, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA15__GPIO3_15 IOMUX_PAD(0x528, 0x1D8, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA15__IPU_DI1_PIN1 IOMUX_PAD(0x528, 0x1D8, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA15__IPU_DI1_PIN4 IOMUX_PAD(0x528, 0x1D8, 4, 0x0, 0, 0) +#define _MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B IOMUX_PAD(0x52C, 0x1DC, 0, 0x0, 0, 0) +#define _MX53_PAD_NANDF_WE_B__GPIO6_12 IOMUX_PAD(0x52C, 0x1DC, 1, 0x0, 0, 0) +#define _MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B IOMUX_PAD(0x530, 0x1E0, 0, 0x0, 0, 0) +#define _MX53_PAD_NANDF_RE_B__GPIO6_13 IOMUX_PAD(0x530, 0x1E0, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT IOMUX_PAD(0x534, 0x1E4, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_WAIT__GPIO5_0 IOMUX_PAD(0x534, 0x1E4, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B IOMUX_PAD(0x534, 0x1E4, 2, 0x0, 0, 0) +#define _MX53_PAD_LVDS1_TX3_P__GPIO6_22 IOMUX_PAD(NON_PAD_I, 0x1EC, 0, 0x0, 0, 0) +#define _MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 IOMUX_PAD(NON_PAD_I, 0x1EC, 1, 0x0, 0, 0) +#define _MX53_PAD_LVDS1_TX2_P__GPIO6_24 IOMUX_PAD(NON_PAD_I, 0x1F0, 0, 0x0, 0, 0) +#define _MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 IOMUX_PAD(NON_PAD_I, 0x1F0, 1, 0x0, 0, 0) +#define _MX53_PAD_LVDS1_CLK_P__GPIO6_26 IOMUX_PAD(NON_PAD_I, 0x1F4, 0, 0x0, 0, 0) +#define _MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK IOMUX_PAD(NON_PAD_I, 0x1F4, 1, 0x0, 0, 0) +#define _MX53_PAD_LVDS1_TX1_P__GPIO6_28 IOMUX_PAD(NON_PAD_I, 0x1F8, 0, 0x0, 0, 0) +#define _MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 IOMUX_PAD(NON_PAD_I, 0x1F8, 1, 0x0, 0, 0) +#define _MX53_PAD_LVDS1_TX0_P__GPIO6_30 IOMUX_PAD(NON_PAD_I, 0x1FC, 0, 0x0, 0, 0) +#define _MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 IOMUX_PAD(NON_PAD_I, 0x1FC, 1, 0x0, 0, 0) +#define _MX53_PAD_LVDS0_TX3_P__GPIO7_22 IOMUX_PAD(NON_PAD_I, 0x200, 0, 0x0, 0, 0) +#define _MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 IOMUX_PAD(NON_PAD_I, 0x200, 1, 0x0, 0, 0) +#define _MX53_PAD_LVDS0_CLK_P__GPIO7_24 IOMUX_PAD(NON_PAD_I, 0x204, 0, 0x0, 0, 0) +#define _MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK IOMUX_PAD(NON_PAD_I, 0x204, 1, 0x0, 0, 0) +#define _MX53_PAD_LVDS0_TX2_P__GPIO7_26 IOMUX_PAD(NON_PAD_I, 0x208, 0, 0x0, 0, 0) +#define _MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 IOMUX_PAD(NON_PAD_I, 0x208, 1, 0x0, 0, 0) +#define _MX53_PAD_LVDS0_TX1_P__GPIO7_28 IOMUX_PAD(NON_PAD_I, 0x20C, 0, 0x0, 0, 0) +#define _MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 IOMUX_PAD(NON_PAD_I, 0x20C, 1, 0x0, 0, 0) +#define _MX53_PAD_LVDS0_TX0_P__GPIO7_30 IOMUX_PAD(NON_PAD_I, 0x210, 0, 0x0, 0, 0) +#define _MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 IOMUX_PAD(NON_PAD_I, 0x210, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_10__GPIO4_0 IOMUX_PAD(0x540, 0x214, 0, 0x0, 0, 0) +#define _MX53_PAD_GPIO_10__OSC32k_32K_OUT IOMUX_PAD(0x540, 0x214, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_11__GPIO4_1 IOMUX_PAD(0x544, 0x218, 0, 0x0, 0, 0) +#define _MX53_PAD_GPIO_12__GPIO4_2 IOMUX_PAD(0x548, 0x21C, 0, 0x0, 0, 0) +#define _MX53_PAD_GPIO_13__GPIO4_3 IOMUX_PAD(0x54C, 0x220, 0, 0x0, 0, 0) +#define _MX53_PAD_GPIO_14__GPIO4_4 IOMUX_PAD(0x550, 0x224, 0, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CLE__EMI_NANDF_CLE IOMUX_PAD(0x5A0, 0x228, 0, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CLE__GPIO6_7 IOMUX_PAD(0x5A0, 0x228, 1, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 IOMUX_PAD(0x5A0, 0x228, 7, 0x0, 0, 0) +#define _MX53_PAD_NANDF_ALE__EMI_NANDF_ALE IOMUX_PAD(0x5A4, 0x22C, 0, 0x0, 0, 0) +#define _MX53_PAD_NANDF_ALE__GPIO6_8 IOMUX_PAD(0x5A4, 0x22C, 1, 0x0, 0, 0) +#define _MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 IOMUX_PAD(0x5A4, 0x22C, 7, 0x0, 0, 0) +#define _MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B IOMUX_PAD(0x5A8, 0x230, 0, 0x0, 0, 0) +#define _MX53_PAD_NANDF_WP_B__GPIO6_9 IOMUX_PAD(0x5A8, 0x230, 1, 0x0, 0, 0) +#define _MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 IOMUX_PAD(0x5A8, 0x230, 7, 0x0, 0, 0) +#define _MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 IOMUX_PAD(0x5AC, 0x234, 0, 0x0, 0, 0) +#define _MX53_PAD_NANDF_RB0__GPIO6_10 IOMUX_PAD(0x5AC, 0x234, 1, 0x0, 0, 0) +#define _MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 IOMUX_PAD(0x5AC, 0x234, 7, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 IOMUX_PAD(0x5B0, 0x238, 0, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS0__GPIO6_11 IOMUX_PAD(0x5B0, 0x238, 1, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 IOMUX_PAD(0x5B0, 0x238, 7, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 IOMUX_PAD(0x5B4, 0x23C, 0, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS1__GPIO6_14 IOMUX_PAD(0x5B4, 0x23C, 1, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS1__MLB_MLBCLK IOMUX_PAD(0x5B4, 0x23C, 6, 0x858, 0, 0) +#define _MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 IOMUX_PAD(0x5B4, 0x23C, 7, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 IOMUX_PAD(0x5B8, 0x240, 0, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS2__GPIO6_15 IOMUX_PAD(0x5B8, 0x240, 1, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS2__IPU_SISG_0 IOMUX_PAD(0x5B8, 0x240, 2, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS2__ESAI1_TX0 IOMUX_PAD(0x5B8, 0x240, 3, 0x7E4, 0, 0) +#define _MX53_PAD_NANDF_CS2__EMI_WEIM_CRE IOMUX_PAD(0x5B8, 0x240, 4, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK IOMUX_PAD(0x5B8, 0x240, 5, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS2__MLB_MLBSIG IOMUX_PAD(0x5B8, 0x240, 6, 0x860, 0, 0) +#define _MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 IOMUX_PAD(0x5B8, 0x240, 7, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 IOMUX_PAD(0x5BC, 0x244, 0, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS3__GPIO6_16 IOMUX_PAD(0x5BC, 0x244, 1, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS3__IPU_SISG_1 IOMUX_PAD(0x5BC, 0x244, 2, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS3__ESAI1_TX1 IOMUX_PAD(0x5BC, 0x244, 3, 0x7E8, 0, 0) +#define _MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 IOMUX_PAD(0x5BC, 0x244, 4, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS3__MLB_MLBDAT IOMUX_PAD(0x5BC, 0x244, 6, 0x85C, 0, 0) +#define _MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 IOMUX_PAD(0x5BC, 0x244, 7, 0x0, 0, 0) +#define _MX53_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x5C4, 0x248, 0, 0x804, 1, 0) +#define _MX53_PAD_FEC_MDIO__GPIO1_22 IOMUX_PAD(0x5C4, 0x248, 1, 0x0, 0, 0) +#define _MX53_PAD_FEC_MDIO__ESAI1_SCKR IOMUX_PAD(0x5C4, 0x248, 2, 0x7DC, 0, 0) +#define _MX53_PAD_FEC_MDIO__FEC_COL IOMUX_PAD(0x5C4, 0x248, 3, 0x800, 1, 0) +#define _MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 IOMUX_PAD(0x5C4, 0x248, 4, 0x0, 0, 0) +#define _MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 IOMUX_PAD(0x5C4, 0x248, 5, 0x0, 0, 0) +#define _MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 IOMUX_PAD(0x5C4, 0x248, 6, 0x0, 0, 0) +#define _MX53_PAD_FEC_REF_CLK__FEC_TX_CLK IOMUX_PAD(0x5C8, 0x24C, 0, 0x0, 0, 0) +#define _MX53_PAD_FEC_REF_CLK__GPIO1_23 IOMUX_PAD(0x5C8, 0x24C, 1, 0x0, 0, 0) +#define _MX53_PAD_FEC_REF_CLK__ESAI1_FSR IOMUX_PAD(0x5C8, 0x24C, 2, 0x7CC, 0, 0) +#define _MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 IOMUX_PAD(0x5C8, 0x24C, 5, 0x0, 0, 0) +#define _MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 IOMUX_PAD(0x5C8, 0x24C, 6, 0x0, 0, 0) +#define _MX53_PAD_FEC_RX_ER__FEC_RX_ER IOMUX_PAD(0x5CC, 0x250, 0, 0x0, 0, 0) +#define _MX53_PAD_FEC_RX_ER__GPIO1_24 IOMUX_PAD(0x5CC, 0x250, 1, 0x0, 0, 0) +#define _MX53_PAD_FEC_RX_ER__ESAI1_HCKR IOMUX_PAD(0x5CC, 0x250, 2, 0x7D4, 0, 0) +#define _MX53_PAD_FEC_RX_ER__FEC_RX_CLK IOMUX_PAD(0x5CC, 0x250, 3, 0x808, 1, 0) +#define _MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 IOMUX_PAD(0x5CC, 0x250, 4, 0x0, 0, 0) +#define _MX53_PAD_FEC_CRS_DV__FEC_RX_DV IOMUX_PAD(0x5D0, 0x254, 0, 0x0, 0, 0) +#define _MX53_PAD_FEC_CRS_DV__GPIO1_25 IOMUX_PAD(0x5D0, 0x254, 1, 0x0, 0, 0) +#define _MX53_PAD_FEC_CRS_DV__ESAI1_SCKT IOMUX_PAD(0x5D0, 0x254, 2, 0x7E0, 0, 0) +#define _MX53_PAD_FEC_RXD1__FEC_RDATA_1 IOMUX_PAD(0x5D4, 0x258, 0, 0x0, 0, 0) +#define _MX53_PAD_FEC_RXD1__GPIO1_26 IOMUX_PAD(0x5D4, 0x258, 1, 0x0, 0, 0) +#define _MX53_PAD_FEC_RXD1__ESAI1_FST IOMUX_PAD(0x5D4, 0x258, 2, 0x7D0, 0, 0) +#define _MX53_PAD_FEC_RXD1__MLB_MLBSIG IOMUX_PAD(0x5D4, 0x258, 3, 0x860, 1, 0) +#define _MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 IOMUX_PAD(0x5D4, 0x258, 4, 0x0, 0, 0) +#define _MX53_PAD_FEC_RXD0__FEC_RDATA_0 IOMUX_PAD(0x5D8, 0x25C, 0, 0x0, 0, 0) +#define _MX53_PAD_FEC_RXD0__GPIO1_27 IOMUX_PAD(0x5D8, 0x25C, 1, 0x0, 0, 0) +#define _MX53_PAD_FEC_RXD0__ESAI1_HCKT IOMUX_PAD(0x5D8, 0x25C, 2, 0x7D8, 0, 0) +#define _MX53_PAD_FEC_RXD0__OSC32k_32K_OUT IOMUX_PAD(0x5D8, 0x25C, 3, 0x0, 0, 0) +#define _MX53_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x5DC, 0x260, 0, 0x0, 0, 0) +#define _MX53_PAD_FEC_TX_EN__GPIO1_28 IOMUX_PAD(0x5DC, 0x260, 1, 0x0, 0, 0) +#define _MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 IOMUX_PAD(0x5DC, 0x260, 2, 0x7F0, 0, 0) +#define _MX53_PAD_FEC_TXD1__FEC_TDATA_1 IOMUX_PAD(0x5E0, 0x264, 0, 0x0, 0, 0) +#define _MX53_PAD_FEC_TXD1__GPIO1_29 IOMUX_PAD(0x5E0, 0x264, 1, 0x0, 0, 0) +#define _MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 IOMUX_PAD(0x5E0, 0x264, 2, 0x7EC, 0, 0) +#define _MX53_PAD_FEC_TXD1__MLB_MLBCLK IOMUX_PAD(0x5E0, 0x264, 3, 0x858, 1, 0) +#define _MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK IOMUX_PAD(0x5E0, 0x264, 4, 0x0, 0, 0) +#define _MX53_PAD_FEC_TXD0__FEC_TDATA_0 IOMUX_PAD(0x5E4, 0x268, 0, 0x0, 0, 0) +#define _MX53_PAD_FEC_TXD0__GPIO1_30 IOMUX_PAD(0x5E4, 0x268, 1, 0x0, 0, 0) +#define _MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 IOMUX_PAD(0x5E4, 0x268, 2, 0x7F4, 0, 0) +#define _MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 IOMUX_PAD(0x5E4, 0x268, 7, 0x0, 0, 0) +#define _MX53_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x5E8, 0x26C, 0, 0x0, 0, 0) +#define _MX53_PAD_FEC_MDC__GPIO1_31 IOMUX_PAD(0x5E8, 0x26C, 1, 0x0, 0, 0) +#define _MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 IOMUX_PAD(0x5E8, 0x26C, 2, 0x7F8, 0, 0) +#define _MX53_PAD_FEC_MDC__MLB_MLBDAT IOMUX_PAD(0x5E8, 0x26C, 3, 0x85C, 1, 0) +#define _MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG IOMUX_PAD(0x5E8, 0x26C, 4, 0x0, 0, 0) +#define _MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 IOMUX_PAD(0x5E8, 0x26C, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_DIOW__PATA_DIOW IOMUX_PAD(0x5F0, 0x270, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DIOW__GPIO6_17 IOMUX_PAD(0x5F0, 0x270, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DIOW__UART1_TXD_MUX IOMUX_PAD(0x5F0, 0x270, 3, 0x878, 2, 0) +#define _MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 IOMUX_PAD(0x5F0, 0x270, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_DMACK__PATA_DMACK IOMUX_PAD(0x5F4, 0x274, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DMACK__GPIO6_18 IOMUX_PAD(0x5F4, 0x274, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DMACK__UART1_RXD_MUX IOMUX_PAD(0x5F4, 0x274, 3, 0x878, 3, 0) +#define _MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 IOMUX_PAD(0x5F4, 0x274, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_DMARQ__PATA_DMARQ IOMUX_PAD(0x5F8, 0x278, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DMARQ__GPIO7_0 IOMUX_PAD(0x5F8, 0x278, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DMARQ__UART2_TXD_MUX IOMUX_PAD(0x5F8, 0x278, 3, 0x880, 2, 0) +#define _MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 IOMUX_PAD(0x5F8, 0x278, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 IOMUX_PAD(0x5F8, 0x278, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN IOMUX_PAD(0x5FC, 0x27C, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_BUFFER_EN__GPIO7_1 IOMUX_PAD(0x5FC, 0x27C, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, 0) +#define _MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 IOMUX_PAD(0x5FC, 0x27C, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 IOMUX_PAD(0x5FC, 0x27C, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_INTRQ__PATA_INTRQ IOMUX_PAD(0x600, 0x280, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_INTRQ__GPIO7_2 IOMUX_PAD(0x600, 0x280, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_INTRQ__UART2_CTS IOMUX_PAD(0x600, 0x280, 3, 0x87C, 2, 0) +#define _MX53_PAD_PATA_INTRQ__CAN1_TXCAN IOMUX_PAD(0x600, 0x280, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 IOMUX_PAD(0x600, 0x280, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 IOMUX_PAD(0x600, 0x280, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_DIOR__PATA_DIOR IOMUX_PAD(0x604, 0x284, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DIOR__GPIO7_3 IOMUX_PAD(0x604, 0x284, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DIOR__UART2_RTS IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, 0) +#define _MX53_PAD_PATA_DIOR__CAN1_RXCAN IOMUX_PAD(0x604, 0x284, 4, 0x760, 1, 0) +#define _MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 IOMUX_PAD(0x604, 0x284, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B IOMUX_PAD(0x608, 0x288, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_RESET_B__GPIO7_4 IOMUX_PAD(0x608, 0x288, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_RESET_B__ESDHC3_CMD IOMUX_PAD(0x608, 0x288, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_RESET_B__UART1_CTS IOMUX_PAD(0x608, 0x288, 3, 0x874, 2, 0) +#define _MX53_PAD_PATA_RESET_B__CAN2_TXCAN IOMUX_PAD(0x608, 0x288, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 IOMUX_PAD(0x608, 0x288, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_IORDY__PATA_IORDY IOMUX_PAD(0x60C, 0x28C, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_IORDY__GPIO7_5 IOMUX_PAD(0x60C, 0x28C, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_IORDY__ESDHC3_CLK IOMUX_PAD(0x60C, 0x28C, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_IORDY__UART1_RTS IOMUX_PAD(0x60C, 0x28C, 3, 0x874, 3, 0) +#define _MX53_PAD_PATA_IORDY__CAN2_RXCAN IOMUX_PAD(0x60C, 0x28C, 4, 0x764, 1, 0) +#define _MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 IOMUX_PAD(0x60C, 0x28C, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_0__PATA_DA_0 IOMUX_PAD(0x610, 0x290, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_0__GPIO7_6 IOMUX_PAD(0x610, 0x290, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_0__ESDHC3_RST IOMUX_PAD(0x610, 0x290, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_0__OWIRE_LINE IOMUX_PAD(0x610, 0x290, 4, 0x864, 0, 0) +#define _MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 IOMUX_PAD(0x610, 0x290, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_1__PATA_DA_1 IOMUX_PAD(0x614, 0x294, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_1__GPIO7_7 IOMUX_PAD(0x614, 0x294, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_1__ESDHC4_CMD IOMUX_PAD(0x614, 0x294, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_1__UART3_CTS IOMUX_PAD(0x614, 0x294, 4, 0x884, 4, 0) +#define _MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 IOMUX_PAD(0x614, 0x294, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_2__PATA_DA_2 IOMUX_PAD(0x618, 0x298, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_2__GPIO7_8 IOMUX_PAD(0x618, 0x298, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_2__ESDHC4_CLK IOMUX_PAD(0x618, 0x298, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_2__UART3_RTS IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, 0) +#define _MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 IOMUX_PAD(0x618, 0x298, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_CS_0__PATA_CS_0 IOMUX_PAD(0x61C, 0x29C, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_CS_0__GPIO7_9 IOMUX_PAD(0x61C, 0x29C, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_CS_0__UART3_TXD_MUX IOMUX_PAD(0x61C, 0x29C, 4, 0x888, 2, 0) +#define _MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 IOMUX_PAD(0x61C, 0x29C, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_CS_1__PATA_CS_1 IOMUX_PAD(0x620, 0x2A0, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_CS_1__GPIO7_10 IOMUX_PAD(0x620, 0x2A0, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_CS_1__UART3_RXD_MUX IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, 0) +#define _MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 IOMUX_PAD(0x620, 0x2A0, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA0__PATA_DATA_0 IOMUX_PAD(0x628, 0x2A4, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA0__GPIO2_0 IOMUX_PAD(0x628, 0x2A4, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 IOMUX_PAD(0x628, 0x2A4, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA0__ESDHC3_DAT4 IOMUX_PAD(0x628, 0x2A4, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 IOMUX_PAD(0x628, 0x2A4, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 IOMUX_PAD(0x628, 0x2A4, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 IOMUX_PAD(0x628, 0x2A4, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA1__PATA_DATA_1 IOMUX_PAD(0x62C, 0x2A8, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA1__GPIO2_1 IOMUX_PAD(0x62C, 0x2A8, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 IOMUX_PAD(0x62C, 0x2A8, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA1__ESDHC3_DAT5 IOMUX_PAD(0x62C, 0x2A8, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 IOMUX_PAD(0x62C, 0x2A8, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 IOMUX_PAD(0x62C, 0x2A8, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA2__PATA_DATA_2 IOMUX_PAD(0x630, 0x2AC, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA2__GPIO2_2 IOMUX_PAD(0x630, 0x2AC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 IOMUX_PAD(0x630, 0x2AC, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA2__ESDHC3_DAT6 IOMUX_PAD(0x630, 0x2AC, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 IOMUX_PAD(0x630, 0x2AC, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 IOMUX_PAD(0x630, 0x2AC, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA3__PATA_DATA_3 IOMUX_PAD(0x634, 0x2B0, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA3__GPIO2_3 IOMUX_PAD(0x634, 0x2B0, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 IOMUX_PAD(0x634, 0x2B0, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA3__ESDHC3_DAT7 IOMUX_PAD(0x634, 0x2B0, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 IOMUX_PAD(0x634, 0x2B0, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 IOMUX_PAD(0x634, 0x2B0, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA4__PATA_DATA_4 IOMUX_PAD(0x638, 0x2B4, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA4__GPIO2_4 IOMUX_PAD(0x638, 0x2B4, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 IOMUX_PAD(0x638, 0x2B4, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA4__ESDHC4_DAT4 IOMUX_PAD(0x638, 0x2B4, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 IOMUX_PAD(0x638, 0x2B4, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 IOMUX_PAD(0x638, 0x2B4, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA5__PATA_DATA_5 IOMUX_PAD(0x63C, 0x2B8, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA5__GPIO2_5 IOMUX_PAD(0x63C, 0x2B8, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 IOMUX_PAD(0x63C, 0x2B8, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA5__ESDHC4_DAT5 IOMUX_PAD(0x63C, 0x2B8, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 IOMUX_PAD(0x63C, 0x2B8, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 IOMUX_PAD(0x63C, 0x2B8, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__PATA_DATA_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__GPIO2_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__ESDHC4_DAT6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA7__PATA_DATA_7 IOMUX_PAD(0x644, 0x2C0, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA7__GPIO2_7 IOMUX_PAD(0x644, 0x2C0, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 IOMUX_PAD(0x644, 0x2C0, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA7__ESDHC4_DAT7 IOMUX_PAD(0x644, 0x2C0, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 IOMUX_PAD(0x644, 0x2C0, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 IOMUX_PAD(0x644, 0x2C0, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA8__PATA_DATA_8 IOMUX_PAD(0x648, 0x2C4, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA8__GPIO2_8 IOMUX_PAD(0x648, 0x2C4, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA8__ESDHC1_DAT4 IOMUX_PAD(0x648, 0x2C4, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 IOMUX_PAD(0x648, 0x2C4, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA8__ESDHC3_DAT0 IOMUX_PAD(0x648, 0x2C4, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 IOMUX_PAD(0x648, 0x2C4, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 IOMUX_PAD(0x648, 0x2C4, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA9__PATA_DATA_9 IOMUX_PAD(0x64C, 0x2C8, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA9__GPIO2_9 IOMUX_PAD(0x64C, 0x2C8, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA9__ESDHC1_DAT5 IOMUX_PAD(0x64C, 0x2C8, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 IOMUX_PAD(0x64C, 0x2C8, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA9__ESDHC3_DAT1 IOMUX_PAD(0x64C, 0x2C8, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 IOMUX_PAD(0x64C, 0x2C8, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 IOMUX_PAD(0x64C, 0x2C8, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA10__PATA_DATA_10 IOMUX_PAD(0x650, 0x2CC, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA10__GPIO2_10 IOMUX_PAD(0x650, 0x2CC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA10__ESDHC1_DAT6 IOMUX_PAD(0x650, 0x2CC, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 IOMUX_PAD(0x650, 0x2CC, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA10__ESDHC3_DAT2 IOMUX_PAD(0x650, 0x2CC, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 IOMUX_PAD(0x650, 0x2CC, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 IOMUX_PAD(0x650, 0x2CC, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA11__PATA_DATA_11 IOMUX_PAD(0x654, 0x2D0, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA11__GPIO2_11 IOMUX_PAD(0x654, 0x2D0, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA11__ESDHC1_DAT7 IOMUX_PAD(0x654, 0x2D0, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 IOMUX_PAD(0x654, 0x2D0, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA11__ESDHC3_DAT3 IOMUX_PAD(0x654, 0x2D0, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 IOMUX_PAD(0x654, 0x2D0, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 IOMUX_PAD(0x654, 0x2D0, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA12__PATA_DATA_12 IOMUX_PAD(0x658, 0x2D4, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA12__GPIO2_12 IOMUX_PAD(0x658, 0x2D4, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA12__ESDHC2_DAT4 IOMUX_PAD(0x658, 0x2D4, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 IOMUX_PAD(0x658, 0x2D4, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA12__ESDHC4_DAT0 IOMUX_PAD(0x658, 0x2D4, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 IOMUX_PAD(0x658, 0x2D4, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 IOMUX_PAD(0x658, 0x2D4, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA13__PATA_DATA_13 IOMUX_PAD(0x65C, 0x2D8, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA13__GPIO2_13 IOMUX_PAD(0x65C, 0x2D8, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA13__ESDHC2_DAT5 IOMUX_PAD(0x65C, 0x2D8, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 IOMUX_PAD(0x65C, 0x2D8, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA13__ESDHC4_DAT1 IOMUX_PAD(0x65C, 0x2D8, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 IOMUX_PAD(0x65C, 0x2D8, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 IOMUX_PAD(0x65C, 0x2D8, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA14__PATA_DATA_14 IOMUX_PAD(0x660, 0x2DC, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA14__GPIO2_14 IOMUX_PAD(0x660, 0x2DC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA14__ESDHC2_DAT6 IOMUX_PAD(0x660, 0x2DC, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 IOMUX_PAD(0x660, 0x2DC, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA14__ESDHC4_DAT2 IOMUX_PAD(0x660, 0x2DC, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 IOMUX_PAD(0x660, 0x2DC, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 IOMUX_PAD(0x660, 0x2DC, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA15__PATA_DATA_15 IOMUX_PAD(0x664, 0x2E0, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA15__GPIO2_15 IOMUX_PAD(0x664, 0x2E0, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA15__ESDHC2_DAT7 IOMUX_PAD(0x664, 0x2E0, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 IOMUX_PAD(0x664, 0x2E0, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA15__ESDHC4_DAT3 IOMUX_PAD(0x664, 0x2E0, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 IOMUX_PAD(0x664, 0x2E0, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 IOMUX_PAD(0x664, 0x2E0, 6, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA0__ESDHC1_DAT0 IOMUX_PAD(0x66C, 0x2E4, 0, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA0__GPIO1_16 IOMUX_PAD(0x66C, 0x2E4, 1, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA0__GPT_CAPIN1 IOMUX_PAD(0x66C, 0x2E4, 3, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA0__CSPI_MISO IOMUX_PAD(0x66C, 0x2E4, 5, 0x784, 2, 0) +#define _MX53_PAD_SD1_DATA0__CCM_PLL3_BYP IOMUX_PAD(0x66C, 0x2E4, 7, 0x778, 0, 0) +#define _MX53_PAD_SD1_DATA1__ESDHC1_DAT1 IOMUX_PAD(0x670, 0x2E8, 0, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA1__GPIO1_17 IOMUX_PAD(0x670, 0x2E8, 1, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA1__GPT_CAPIN2 IOMUX_PAD(0x670, 0x2E8, 3, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA1__CSPI_SS0 IOMUX_PAD(0x670, 0x2E8, 5, 0x78C, 3, 0) +#define _MX53_PAD_SD1_DATA1__CCM_PLL4_BYP IOMUX_PAD(0x670, 0x2E8, 7, 0x77C, 1, 0) +#define _MX53_PAD_SD1_CMD__ESDHC1_CMD IOMUX_PAD(0x674, 0x2EC, IOMUX_CONFIG_SION, 0x0, 0, 0) +#define _MX53_PAD_SD1_CMD__GPIO1_18 IOMUX_PAD(0x674, 0x2EC, 1, 0x0, 0, 0) +#define _MX53_PAD_SD1_CMD__GPT_CMPOUT1 IOMUX_PAD(0x674, 0x2EC, 3, 0x0, 0, 0) +#define _MX53_PAD_SD1_CMD__CSPI_MOSI IOMUX_PAD(0x674, 0x2EC, 5, 0x788, 2, 0) +#define _MX53_PAD_SD1_CMD__CCM_PLL1_BYP IOMUX_PAD(0x674, 0x2EC, 7, 0x770, 0, 0) +#define _MX53_PAD_SD1_DATA2__ESDHC1_DAT2 IOMUX_PAD(0x678, 0x2F0, 0, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA2__GPIO1_19 IOMUX_PAD(0x678, 0x2F0, 1, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA2__GPT_CMPOUT2 IOMUX_PAD(0x678, 0x2F0, 2, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA2__PWM2_PWMO IOMUX_PAD(0x678, 0x2F0, 3, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA2__WDOG1_WDOG_B IOMUX_PAD(0x678, 0x2F0, 4, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA2__CSPI_SS1 IOMUX_PAD(0x678, 0x2F0, 5, 0x790, 2, 0) +#define _MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB IOMUX_PAD(0x678, 0x2F0, 6, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA2__CCM_PLL2_BYP IOMUX_PAD(0x678, 0x2F0, 7, 0x774, 0, 0) +#define _MX53_PAD_SD1_CLK__ESDHC1_CLK IOMUX_PAD(0x67C, 0x2F4, 0, 0x0, 0, 0) +#define _MX53_PAD_SD1_CLK__GPIO1_20 IOMUX_PAD(0x67C, 0x2F4, 1, 0x0, 0, 0) +#define _MX53_PAD_SD1_CLK__OSC32k_32K_OUT IOMUX_PAD(0x67C, 0x2F4, 2, 0x0, 0, 0) +#define _MX53_PAD_SD1_CLK__GPT_CLKIN IOMUX_PAD(0x67C, 0x2F4, 3, 0x0, 0, 0) +#define _MX53_PAD_SD1_CLK__CSPI_SCLK IOMUX_PAD(0x67C, 0x2F4, 5, 0x780, 2, 0) +#define _MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 IOMUX_PAD(0x67C, 0x2F4, 7, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA3__ESDHC1_DAT3 IOMUX_PAD(0x680, 0x2F8, 0, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA3__GPIO1_21 IOMUX_PAD(0x680, 0x2F8, 1, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA3__GPT_CMPOUT3 IOMUX_PAD(0x680, 0x2F8, 2, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA3__PWM1_PWMO IOMUX_PAD(0x680, 0x2F8, 3, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA3__WDOG2_WDOG_B IOMUX_PAD(0x680, 0x2F8, 4, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA3__CSPI_SS2 IOMUX_PAD(0x680, 0x2F8, 5, 0x794, 2, 0) +#define _MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB IOMUX_PAD(0x680, 0x2F8, 6, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 IOMUX_PAD(0x680, 0x2F8, 7, 0x0, 0, 0) +#define _MX53_PAD_SD2_CLK__ESDHC2_CLK IOMUX_PAD(0x688, 0x2FC, 0, 0x0, 0, 0) +#define _MX53_PAD_SD2_CLK__GPIO1_10 IOMUX_PAD(0x688, 0x2FC, 1, 0x0, 0, 0) +#define _MX53_PAD_SD2_CLK__KPP_COL_5 IOMUX_PAD(0x688, 0x2FC, 2, 0x840, 2, 0) +#define _MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS IOMUX_PAD(0x688, 0x2FC, 3, 0x73C, 1, 0) +#define _MX53_PAD_SD2_CLK__CSPI_SCLK IOMUX_PAD(0x688, 0x2FC, 5, 0x780, 3, 0) +#define _MX53_PAD_SD2_CLK__SCC_RANDOM_V IOMUX_PAD(0x688, 0x2FC, 7, 0x0, 0, 0) +#define _MX53_PAD_SD2_CMD__ESDHC2_CMD IOMUX_PAD(0x68C, 0x300, 0, 0x0, 0, 0) +#define _MX53_PAD_SD2_CMD__GPIO1_11 IOMUX_PAD(0x68C, 0x300, 1, 0x0, 0, 0) +#define _MX53_PAD_SD2_CMD__KPP_ROW_5 IOMUX_PAD(0x68C, 0x300, 2, 0x84C, 1, 0) +#define _MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC IOMUX_PAD(0x68C, 0x300, 3, 0x738, 1, 0) +#define _MX53_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(0x68C, 0x300, 5, 0x788, 3, 0) +#define _MX53_PAD_SD2_CMD__SCC_RANDOM IOMUX_PAD(0x68C, 0x300, 7, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA3__ESDHC2_DAT3 IOMUX_PAD(0x690, 0x304, 0, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA3__GPIO1_12 IOMUX_PAD(0x690, 0x304, 1, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA3__KPP_COL_6 IOMUX_PAD(0x690, 0x304, 2, 0x844, 1, 0) +#define _MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC IOMUX_PAD(0x690, 0x304, 3, 0x740, 1, 0) +#define _MX53_PAD_SD2_DATA3__CSPI_SS2 IOMUX_PAD(0x690, 0x304, 5, 0x794, 3, 0) +#define _MX53_PAD_SD2_DATA3__SJC_DONE IOMUX_PAD(0x690, 0x304, 7, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA2__ESDHC2_DAT2 IOMUX_PAD(0x694, 0x308, 0, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA2__GPIO1_13 IOMUX_PAD(0x694, 0x308, 1, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA2__KPP_ROW_6 IOMUX_PAD(0x694, 0x308, 2, 0x850, 1, 0) +#define _MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD IOMUX_PAD(0x694, 0x308, 3, 0x734, 1, 0) +#define _MX53_PAD_SD2_DATA2__CSPI_SS1 IOMUX_PAD(0x694, 0x308, 5, 0x790, 3, 0) +#define _MX53_PAD_SD2_DATA2__SJC_FAIL IOMUX_PAD(0x694, 0x308, 7, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x698, 0x30C, 0, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA1__GPIO1_14 IOMUX_PAD(0x698, 0x30C, 1, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA1__KPP_COL_7 IOMUX_PAD(0x698, 0x30C, 2, 0x848, 1, 0) +#define _MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS IOMUX_PAD(0x698, 0x30C, 3, 0x744, 0, 0) +#define _MX53_PAD_SD2_DATA1__CSPI_SS0 IOMUX_PAD(0x698, 0x30C, 5, 0x78C, 4, 0) +#define _MX53_PAD_SD2_DATA1__RTIC_SEC_VIO IOMUX_PAD(0x698, 0x30C, 7, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x69C, 0x310, 0, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA0__GPIO1_15 IOMUX_PAD(0x69C, 0x310, 1, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA0__KPP_ROW_7 IOMUX_PAD(0x69C, 0x310, 2, 0x854, 1, 0) +#define _MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD IOMUX_PAD(0x69C, 0x310, 3, 0x730, 1, 0) +#define _MX53_PAD_SD2_DATA0__CSPI_MISO IOMUX_PAD(0x69C, 0x310, 5, 0x784, 3, 0) +#define _MX53_PAD_SD2_DATA0__RTIC_DONE_INT IOMUX_PAD(0x69C, 0x310, 7, 0x0, 0, 0) +#define _MX53_PAD_GPIO_0__CCM_CLKO IOMUX_PAD(0x6A4, 0x314, 0, 0x0, 0, 0) +#define _MX53_PAD_GPIO_0__GPIO1_0 IOMUX_PAD(0x6A4, 0x314, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_0__KPP_COL_5 IOMUX_PAD(0x6A4, 0x314, 2, 0x840, 3, 0) +#define _MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK IOMUX_PAD(0x6A4, 0x314, 3, 0x0, 0, 0) +#define _MX53_PAD_GPIO_0__EPIT1_EPITO IOMUX_PAD(0x6A4, 0x314, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_0__SRTC_ALARM_DEB IOMUX_PAD(0x6A4, 0x314, 5, 0x0, 0, 0) +#define _MX53_PAD_GPIO_0__USBOH3_USBH1_PWR IOMUX_PAD(0x6A4, 0x314, 6, 0x0, 0, 0) +#define _MX53_PAD_GPIO_0__CSU_TD IOMUX_PAD(0x6A4, 0x314, 7, 0x0, 0, 0) +#define _MX53_PAD_GPIO_1__ESAI1_SCKR IOMUX_PAD(0x6A8, 0x318, 0, 0x7DC, 1, 0) +#define _MX53_PAD_GPIO_1__GPIO1_1 IOMUX_PAD(0x6A8, 0x318, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_1__KPP_ROW_5 IOMUX_PAD(0x6A8, 0x318, 2, 0x84C, 2, 0) +#define _MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK IOMUX_PAD(0x6A8, 0x318, 3, 0x0, 0, 0) +#define _MX53_PAD_GPIO_1__PWM2_PWMO IOMUX_PAD(0x6A8, 0x318, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_1__WDOG2_WDOG_B IOMUX_PAD(0x6A8, 0x318, 5, 0x0, 0, 0) +#define _MX53_PAD_GPIO_1__ESDHC1_CD IOMUX_PAD(0x6A8, 0x318, 6, 0x0, 0, 0) +#define _MX53_PAD_GPIO_1__SRC_TESTER_ACK IOMUX_PAD(0x6A8, 0x318, 7, 0x0, 0, 0) +#define _MX53_PAD_GPIO_9__ESAI1_FSR IOMUX_PAD(0x6AC, 0x31C, 0, 0x7CC, 1, 0) +#define _MX53_PAD_GPIO_9__GPIO1_9 IOMUX_PAD(0x6AC, 0x31C, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_9__KPP_COL_6 IOMUX_PAD(0x6AC, 0x31C, 2, 0x844, 2, 0) +#define _MX53_PAD_GPIO_9__CCM_REF_EN_B IOMUX_PAD(0x6AC, 0x31C, 3, 0x0, 0, 0) +#define _MX53_PAD_GPIO_9__PWM1_PWMO IOMUX_PAD(0x6AC, 0x31C, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_9__WDOG1_WDOG_B IOMUX_PAD(0x6AC, 0x31C, 5, 0x0, 0, 0) +#define _MX53_PAD_GPIO_9__ESDHC1_WP IOMUX_PAD(0x6AC, 0x31C, 6, 0x7FC, 1, 0) +#define _MX53_PAD_GPIO_9__SCC_FAIL_STATE IOMUX_PAD(0x6AC, 0x31C, 7, 0x0, 0, 0) +#define _MX53_PAD_GPIO_3__ESAI1_HCKR IOMUX_PAD(0x6B0, 0x320, 0, 0x7D4, 1, 0) +#define _MX53_PAD_GPIO_3__GPIO1_3 IOMUX_PAD(0x6B0, 0x320, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_3__I2C3_SCL IOMUX_PAD(0x6B0, 0x320, 2 | IOMUX_CONFIG_SION, 0x824, 1, 0) +#define _MX53_PAD_GPIO_3__DPLLIP1_TOG_EN IOMUX_PAD(0x6B0, 0x320, 3, 0x0, 0, 0) +#define _MX53_PAD_GPIO_3__CCM_CLKO2 IOMUX_PAD(0x6B0, 0x320, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 IOMUX_PAD(0x6B0, 0x320, 5, 0x0, 0, 0) +#define _MX53_PAD_GPIO_3__USBOH3_USBH1_OC IOMUX_PAD(0x6B0, 0x320, 6, 0x8A0, 1, 0) +#define _MX53_PAD_GPIO_3__MLB_MLBCLK IOMUX_PAD(0x6B0, 0x320, 7, 0x858, 2, 0) +#define _MX53_PAD_GPIO_6__ESAI1_SCKT IOMUX_PAD(0x6B4, 0x324, 0, 0x7E0, 1, 0) +#define _MX53_PAD_GPIO_6__GPIO1_6 IOMUX_PAD(0x6B4, 0x324, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_6__I2C3_SDA IOMUX_PAD(0x6B4, 0x324, 2 | IOMUX_CONFIG_SION, 0x828, 1, 0) +#define _MX53_PAD_GPIO_6__CCM_CCM_OUT_0 IOMUX_PAD(0x6B4, 0x324, 3, 0x0, 0, 0) +#define _MX53_PAD_GPIO_6__CSU_CSU_INT_DEB IOMUX_PAD(0x6B4, 0x324, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 IOMUX_PAD(0x6B4, 0x324, 5, 0x0, 0, 0) +#define _MX53_PAD_GPIO_6__ESDHC2_LCTL IOMUX_PAD(0x6B4, 0x324, 6, 0x0, 0, 0) +#define _MX53_PAD_GPIO_6__MLB_MLBSIG IOMUX_PAD(0x6B4, 0x324, 7, 0x860, 2, 0) +#define _MX53_PAD_GPIO_2__ESAI1_FST IOMUX_PAD(0x6B8, 0x328, 0, 0x7D0, 1, 0) +#define _MX53_PAD_GPIO_2__GPIO1_2 IOMUX_PAD(0x6B8, 0x328, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_2__KPP_ROW_6 IOMUX_PAD(0x6B8, 0x328, 2, 0x850, 2, 0) +#define _MX53_PAD_GPIO_2__CCM_CCM_OUT_1 IOMUX_PAD(0x6B8, 0x328, 3, 0x0, 0, 0) +#define _MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 IOMUX_PAD(0x6B8, 0x328, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 IOMUX_PAD(0x6B8, 0x328, 5, 0x0, 0, 0) +#define _MX53_PAD_GPIO_2__ESDHC2_WP IOMUX_PAD(0x6B8, 0x328, 6, 0x0, 0, 0) +#define _MX53_PAD_GPIO_2__MLB_MLBDAT IOMUX_PAD(0x6B8, 0x328, 7, 0x85C, 2, 0) +#define _MX53_PAD_GPIO_4__ESAI1_HCKT IOMUX_PAD(0x6BC, 0x32C, 0, 0x7D8, 1, 0) +#define _MX53_PAD_GPIO_4__GPIO1_4 IOMUX_PAD(0x6BC, 0x32C, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_4__KPP_COL_7 IOMUX_PAD(0x6BC, 0x32C, 2, 0x848, 2, 0) +#define _MX53_PAD_GPIO_4__CCM_CCM_OUT_2 IOMUX_PAD(0x6BC, 0x32C, 3, 0x0, 0, 0) +#define _MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 IOMUX_PAD(0x6BC, 0x32C, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 IOMUX_PAD(0x6BC, 0x32C, 5, 0x0, 0, 0) +#define _MX53_PAD_GPIO_4__ESDHC2_CD IOMUX_PAD(0x6BC, 0x32C, 6, 0x0, 0, 0) +#define _MX53_PAD_GPIO_4__SCC_SEC_STATE IOMUX_PAD(0x6BC, 0x32C, 7, 0x0, 0, 0) +#define _MX53_PAD_GPIO_5__ESAI1_TX2_RX3 IOMUX_PAD(0x6C0, 0x330, 0, 0x7EC, 1, 0) +#define _MX53_PAD_GPIO_5__GPIO1_5 IOMUX_PAD(0x6C0, 0x330, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_5__KPP_ROW_7 IOMUX_PAD(0x6C0, 0x330, 2, 0x854, 2, 0) +#define _MX53_PAD_GPIO_5__CCM_CLKO IOMUX_PAD(0x6C0, 0x330, 3, 0x0, 0, 0) +#define _MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 IOMUX_PAD(0x6C0, 0x330, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 IOMUX_PAD(0x6C0, 0x330, 5, 0x0, 0, 0) +#define _MX53_PAD_GPIO_5__I2C3_SCL IOMUX_PAD(0x6C0, 0x330, 6, 0x824, 2, 0) +#define _MX53_PAD_GPIO_5__CCM_PLL1_BYP IOMUX_PAD(0x6C0, 0x330, 7, 0x770, 1, 0) +#define _MX53_PAD_GPIO_7__ESAI1_TX4_RX1 IOMUX_PAD(0x6C4, 0x334, 0, 0x7F4, 1, 0) +#define _MX53_PAD_GPIO_7__GPIO1_7 IOMUX_PAD(0x6C4, 0x334, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_7__EPIT1_EPITO IOMUX_PAD(0x6C4, 0x334, 2, 0x0, 0, 0) +#define _MX53_PAD_GPIO_7__CAN1_TXCAN IOMUX_PAD(0x6C4, 0x334, 3, 0x0, 0, 0) +#define _MX53_PAD_GPIO_7__UART2_TXD_MUX IOMUX_PAD(0x6C4, 0x334, 4, 0x880, 4, 0) +#define _MX53_PAD_GPIO_7__FIRI_RXD IOMUX_PAD(0x6C4, 0x334, 5, 0x80C, 1, 0) +#define _MX53_PAD_GPIO_7__SPDIF_PLOCK IOMUX_PAD(0x6C4, 0x334, 6, 0x0, 0, 0) +#define _MX53_PAD_GPIO_7__CCM_PLL2_BYP IOMUX_PAD(0x6C4, 0x334, 7, 0x774, 1, 0) +#define _MX53_PAD_GPIO_8__ESAI1_TX5_RX0 IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, 0) +#define _MX53_PAD_GPIO_8__GPIO1_8 IOMUX_PAD(0x6C8, 0x338, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_8__EPIT2_EPITO IOMUX_PAD(0x6C8, 0x338, 2, 0x0, 0, 0) +#define _MX53_PAD_GPIO_8__CAN1_RXCAN IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 3, 0) +#define _MX53_PAD_GPIO_8__UART2_RXD_MUX IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, 0) +#define _MX53_PAD_GPIO_8__FIRI_TXD IOMUX_PAD(0x6C8, 0x338, 5, 0x0, 0, 0) +#define _MX53_PAD_GPIO_8__SPDIF_SRCLK IOMUX_PAD(0x6C8, 0x338, 6, 0x0, 0, 0) +#define _MX53_PAD_GPIO_8__CCM_PLL3_BYP IOMUX_PAD(0x6C8, 0x338, 7, 0x778, 1, 0) +#define _MX53_PAD_GPIO_16__ESAI1_TX3_RX2 IOMUX_PAD(0x6CC, 0x33C, 0, 0x7F0, 1, 0) +#define _MX53_PAD_GPIO_16__GPIO7_11 IOMUX_PAD(0x6CC, 0x33C, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT IOMUX_PAD(0x6CC, 0x33C, 2, 0x0, 0, 0) +#define _MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 IOMUX_PAD(0x6CC, 0x33C, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_16__SPDIF_IN1 IOMUX_PAD(0x6CC, 0x33C, 5, 0x870, 1, 0) +#define _MX53_PAD_GPIO_16__I2C3_SDA IOMUX_PAD(0x6CC, 0x33C, 6 | IOMUX_CONFIG_SION, 0x828, 2, 0) +#define _MX53_PAD_GPIO_16__SJC_DE_B IOMUX_PAD(0x6CC, 0x33C, 7, 0x0, 0, 0) +#define _MX53_PAD_GPIO_17__ESAI1_TX0 IOMUX_PAD(0x6D0, 0x340, 0, 0x7E4, 1, 0) +#define _MX53_PAD_GPIO_17__GPIO7_12 IOMUX_PAD(0x6D0, 0x340, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 IOMUX_PAD(0x6D0, 0x340, 2, 0x868, 1, 0) +#define _MX53_PAD_GPIO_17__GPC_PMIC_RDY IOMUX_PAD(0x6D0, 0x340, 3, 0x810, 1, 0) +#define _MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG IOMUX_PAD(0x6D0, 0x340, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_17__SPDIF_OUT1 IOMUX_PAD(0x6D0, 0x340, 5, 0x0, 0, 0) +#define _MX53_PAD_GPIO_17__IPU_SNOOP2 IOMUX_PAD(0x6D0, 0x340, 6, 0x0, 0, 0) +#define _MX53_PAD_GPIO_17__SJC_JTAG_ACT IOMUX_PAD(0x6D0, 0x340, 7, 0x0, 0, 0) +#define _MX53_PAD_GPIO_18__ESAI1_TX1 IOMUX_PAD(0x6D4, 0x344, 0, 0x7E8, 1, 0) +#define _MX53_PAD_GPIO_18__GPIO7_13 IOMUX_PAD(0x6D4, 0x344, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 IOMUX_PAD(0x6D4, 0x344, 2, 0x86C, 1, 0) +#define _MX53_PAD_GPIO_18__OWIRE_LINE IOMUX_PAD(0x6D4, 0x344, 3, 0x864, 1, 0) +#define _MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG IOMUX_PAD(0x6D4, 0x344, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK IOMUX_PAD(0x6D4, 0x344, 5, 0x768, 1, 0) +#define _MX53_PAD_GPIO_18__ESDHC1_LCTL IOMUX_PAD(0x6D4, 0x344, 6, 0x0, 0, 0) +#define _MX53_PAD_GPIO_18__SRC_SYSTEM_RST IOMUX_PAD(0x6D4, 0x344, 7, 0x0, 0, 0) -#define MX53_PAD_GPIO_19__GPIO_4_5 IOMUX_PAD(0x348, 0x20,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL0__GPIO_4_6 IOMUX_PAD(0x34C, 0x24,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW0__GPIO_4_7 IOMUX_PAD(0x350, 0x28,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL1__GPIO_4_8 IOMUX_PAD(0x354, 0x2C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW1__GPIO_4_9 IOMUX_PAD(0x358, 0x30,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL2__GPIO_4_10 IOMUX_PAD(0x35C, 0x34,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW2__GPIO_4_11 IOMUX_PAD(0x360, 0x38,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL3__GPIO_4_12 IOMUX_PAD(0x364, 0x3C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW3__GPIO_4_13 IOMUX_PAD(0x368, 0x40,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL4__GPIO_4_14 IOMUX_PAD(0x36C, 0x44,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW4__GPIO_4_15 IOMUX_PAD(0x370, 0x48,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_KEYPAD__NVCC_KEYPAD IOMUX_PAD(0x374, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_DISP_CLK__GPIO_4_16 IOMUX_PAD(0x378, 0x4C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN15__GPIO_4_17 IOMUX_PAD(0x37C, 0x50,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN2__GPIO_4_18 IOMUX_PAD(0x380, 0x54,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN3__GPIO_4_19 IOMUX_PAD(0x384, 0x58,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN4__GPIO_4_20 IOMUX_PAD(0x388, 0x5C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT0__GPIO_4_21 IOMUX_PAD(0x38C, 0x60,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT1__GPIO_4_22 IOMUX_PAD(0x390, 0x64,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT2__GPIO_4_23 IOMUX_PAD(0x394, 0x68,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT3__GPIO_4_24 IOMUX_PAD(0x398, 0x6C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT4__GPIO_4_25 IOMUX_PAD(0x39C, 0x70,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT5__GPIO_4_26 IOMUX_PAD(0x3A0, 0x74,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT6__GPIO_4_27 IOMUX_PAD(0x3A4, 0x78,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT7__GPIO_4_28 IOMUX_PAD(0x3A8, 0x7C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT8__GPIO_4_29 IOMUX_PAD(0x3AC, 0x80,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT9__GPIO_4_30 IOMUX_PAD(0x3B0, 0x84,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT10__GPIO_4_31 IOMUX_PAD(0x3B4, 0x88,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT11__GPIO_5_5 IOMUX_PAD(0x3B8, 0x8C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT12__GPIO_5_6 IOMUX_PAD(0x3BC, 0x90,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT13__GPIO_5_7 IOMUX_PAD(0x3C0, 0x94,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT14__GPIO_5_8 IOMUX_PAD(0x3C4, 0x98,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT15__GPIO_5_9 IOMUX_PAD(0x3C8, 0x9C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT16__GPIO_5_10 IOMUX_PAD(0x3CC, 0xA0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT17__GPIO_5_11 IOMUX_PAD(0x3D0, 0xA4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT18__GPIO_5_12 IOMUX_PAD(0x3D4, 0xA8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT19__GPIO_5_13 IOMUX_PAD(0x3D8, 0xAC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT20__GPIO_5_14 IOMUX_PAD(0x3DC, 0xB0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT21__GPIO_5_15 IOMUX_PAD(0x3E0, 0xB4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT22__GPIO_5_16 IOMUX_PAD(0x3E4, 0xB8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT23__GPIO_5_17 IOMUX_PAD(0x3E8, 0xBC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_PIXCLK__GPIO_5_18 IOMUX_PAD(0x3EC, 0xC0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_MCLK__GPIO_5_19 IOMUX_PAD(0x3F0, 0xC4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DATA_EN__GPIO_5_20 IOMUX_PAD(0x3F4, 0xC8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_VSYNC__GPIO_5_21 IOMUX_PAD(0x3F8, 0xCC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D4__GPIO_5_22 IOMUX_PAD(0x3FC, 0xD0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D5__GPIO_5_23 IOMUX_PAD(0x400, 0xD4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D6__GPIO_5_24 IOMUX_PAD(0x404, 0xD8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D7__GPIO_5_25 IOMUX_PAD(0x408, 0xDC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D8__GPIO_5_26 IOMUX_PAD(0x40C, 0xE0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D9__GPIO_5_27 IOMUX_PAD(0x410, 0xE4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D10__GPIO_5_28 IOMUX_PAD(0x414, 0xE8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D11__GPIO_5_29 IOMUX_PAD(0x418, 0xEC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D12__GPIO_5_30 IOMUX_PAD(0x41C, 0xF0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D13__GPIO_5_31 IOMUX_PAD(0x420, 0xF4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D14__GPIO_6_0 IOMUX_PAD(0x424, 0xF8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D15__GPIO_6_1 IOMUX_PAD(0x428, 0xFC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D16__GPIO_6_2 IOMUX_PAD(0x42C, 0x100,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D17__GPIO_6_3 IOMUX_PAD(0x430, 0x104,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D18__GPIO_6_4 IOMUX_PAD(0x434, 0x108,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D19__GPIO_6_5 IOMUX_PAD(0x438, 0x10C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_CSI0__NVCC_CSI0 IOMUX_PAD(0x43C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_JTAG_TMS__JTAG_TMS IOMUX_PAD(0x440, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_JTAG_MOD__JTAG_MOD IOMUX_PAD(0x444, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_JTAG_TRSTB__JTAG_TRSTB IOMUX_PAD(0x448, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_JTAG_TDI__JTAG_TDI IOMUX_PAD(0x44C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_JTAG_TCK__JTAG_TCK IOMUX_PAD(0x450, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_JTAG_TDO__JTAG_TDO IOMUX_PAD(0x454, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A25__GPIO_5_2 IOMUX_PAD(0x458, 0x110,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB2__GPIO_2_30 IOMUX_PAD(0x45C, 0x114,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D16__GPIO_3_16 IOMUX_PAD(0x460, 0x118,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D17__GPIO_3_17 IOMUX_PAD(0x464, 0x11C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D18__GPIO_3_18 IOMUX_PAD(0x468, 0x120,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D16__CSPI1_SCLK IOMUX_PAD(0x460, 0x118,IOMUX_CONFIG_ALT4, 0x79c, 3, NO_PAD_CTRL) -#define MX53_PAD_EIM_D17__CSPI1_MISO IOMUX_PAD(0x464, 0x11C,IOMUX_CONFIG_ALT4, 0x7a0, 3, NO_PAD_CTRL) -#define MX53_PAD_EIM_D18__CSPI1_MOSI IOMUX_PAD(0x468, 0x120,IOMUX_CONFIG_ALT4, 0x7a4, 3, NO_PAD_CTRL) -#define MX53_PAD_EIM_D19__GPIO_3_19 IOMUX_PAD(0x46C, 0x124,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D20__GPIO_3_20 IOMUX_PAD(0x470, 0x128,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D21__GPIO_3_21 IOMUX_PAD(0x474, 0x12C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D22__GPIO_3_22 IOMUX_PAD(0x478, 0x130,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D23__GPIO_3_23 IOMUX_PAD(0x47C, 0x134,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB3__GPIO_2_31 IOMUX_PAD(0x480, 0x138,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D24__GPIO_3_24 IOMUX_PAD(0x484, 0x13C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D25__GPIO_3_25 IOMUX_PAD(0x488, 0x140,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D26__GPIO_3_26 IOMUX_PAD(0x48C, 0x144,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D27__GPIO_3_27 IOMUX_PAD(0x490, 0x148,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D28__GPIO_3_28 IOMUX_PAD(0x494, 0x14C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D29__GPIO_3_29 IOMUX_PAD(0x498, 0x150,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D30__GPIO_3_30 IOMUX_PAD(0x49C, 0x154,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D31__GPIO_3_31 IOMUX_PAD(0x4A0, 0x158,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_EIM1__NVCC_EIM1 IOMUX_PAD(0x4A4, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A24__GPIO_5_4 IOMUX_PAD(0x4A8, 0x15C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A23__GPIO_6_6 IOMUX_PAD(0x4AC, 0x160,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A22__GPIO_2_16 IOMUX_PAD(0x4B0, 0x164,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A21__GPIO_2_17 IOMUX_PAD(0x4B4, 0x168,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A20__GPIO_2_18 IOMUX_PAD(0x4B8, 0x16C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A19__GPIO_2_19 IOMUX_PAD(0x4BC, 0x170,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A18__GPIO_2_20 IOMUX_PAD(0x4C0, 0x174,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A17__GPIO_2_21 IOMUX_PAD(0x4C4, 0x178,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A16__GPIO_2_22 IOMUX_PAD(0x4C8, 0x17C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_CS0__GPIO_2_23 IOMUX_PAD(0x4CC, 0x180,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_CS1__GPIO_2_24 IOMUX_PAD(0x4D0, 0x184,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_OE__GPIO_2_25 IOMUX_PAD(0x4D4, 0x188,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_RW__GPIO_2_26 IOMUX_PAD(0x4D8, 0x18C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_LBA__GPIO_2_27 IOMUX_PAD(0x4DC, 0x190,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_EIM4__NVCC_EIM4 IOMUX_PAD(0x4E0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB0__GPIO_2_28 IOMUX_PAD(0x4E4, 0x194,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB1__GPIO_2_29 IOMUX_PAD(0x4E8, 0x198,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA0__GPIO_3_0 IOMUX_PAD(0x4EC, 0x19C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA1__GPIO_3_1 IOMUX_PAD(0x4F0, 0x1A0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA2__GPIO_3_2 IOMUX_PAD(0x4F4, 0x1A4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA3__GPIO_3_3 IOMUX_PAD(0x4F8, 0x1A8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA4__GPIO_3_4 IOMUX_PAD(0x4FC, 0x1AC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA5__GPIO_3_5 IOMUX_PAD(0x500, 0x1B0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA6__GPIO_3_6 IOMUX_PAD(0x504, 0x1B4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA7__GPIO_3_7 IOMUX_PAD(0x508, 0x1B8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA8__GPIO_3_8 IOMUX_PAD(0x50C, 0x1BC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA9__GPIO_3_9 IOMUX_PAD(0x510, 0x1C0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA10__GPIO_3_10 IOMUX_PAD(0x514, 0x1C4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA11__GPIO_3_11 IOMUX_PAD(0x518, 0x1C8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA12__GPIO_3_12 IOMUX_PAD(0x51C, 0x1CC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA13__GPIO_3_13 IOMUX_PAD(0x520, 0x1D0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA14__GPIO_3_14 IOMUX_PAD(0x524, 0x1D4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA15__GPIO_3_15 IOMUX_PAD(0x528, 0x1D8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_WE_B__GPIO_6_12 IOMUX_PAD(0x52C, 0x1DC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_RE_B__GPIO_6_13 IOMUX_PAD(0x530, 0x1E0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_WAIT__GPIO_5_0 IOMUX_PAD(0x534, 0x1E4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_BCLK__EIM_BCLK IOMUX_PAD(0x538, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_EIM7__NVCC_EIM7 IOMUX_PAD(0x53C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS1_TX3_P__GPIO_6_22 IOMUX_PAD(NON_PAD_I, 0x1EC, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS1_TX2_P__GPIO_6_24 IOMUX_PAD(NON_PAD_I, 0x1F0, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS1_CLK_P__GPIO_6_26 IOMUX_PAD(NON_PAD_I, 0x1F4, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS1_TX1_P__GPIO_6_28 IOMUX_PAD(NON_PAD_I, 0x1F8, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS1_TX0_P__GPIO_6_30 IOMUX_PAD(NON_PAD_I, 0x1FC, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS0_TX3_P__GPIO_7_22 IOMUX_PAD(NON_PAD_I, 0x200, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS0_CLK_P__GPIO_7_24 IOMUX_PAD(NON_PAD_I, 0x204, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS0_TX2_P__GPIO_7_26 IOMUX_PAD(NON_PAD_I, 0x208, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS0_TX1_P__GPIO_7_28 IOMUX_PAD(NON_PAD_I, 0x20C, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS0_TX0_P__GPIO_7_30 IOMUX_PAD(NON_PAD_I, 0x210, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_10__GPIO_4_0 IOMUX_PAD(0x540, 0x214, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_11__GPIO_4_1 IOMUX_PAD(0x544, 0x218, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_12__GPIO_4_2 IOMUX_PAD(0x548, 0x21C, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_13__GPIO_4_3 IOMUX_PAD(0x54C, 0x220, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_14__GPIO_4_4 IOMUX_PAD(0x550, 0x224, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_DQM3__DRAM_DQM3 IOMUX_PAD(0x554, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_SDQS3__DRAM_SDQS3 IOMUX_PAD(0x558, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_SDCKE1__DRAM_SDCKE1 IOMUX_PAD(0x55C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_DQM2__DRAM_DQM2 IOMUX_PAD(0x560, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_SDODT1__DRAM_SDODT1 IOMUX_PAD(0x564, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_SDQS2__DRAM_SDQS2 IOMUX_PAD(0x568, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_RESET__DRAM_RESET IOMUX_PAD(0x56C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_SDCLK1__DRAM_SDCLK1 IOMUX_PAD(0x570, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_CAS__DRAM_CAS IOMUX_PAD(0x574, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_SDCLK0__DRAM_SDCLK0 IOMUX_PAD(0x578, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_SDQS0__DRAM_SDQS0 IOMUX_PAD(0x57C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_SDODT0__DRAM_SDODT0 IOMUX_PAD(0x580, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_DQM0__DRAM_DQM0 IOMUX_PAD(0x584, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_RAS__DRAM_RAS IOMUX_PAD(0x588, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_SDCKE0__DRAM_SDCKE0 IOMUX_PAD(0x58C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_SDQS1__DRAM_SDQS1 IOMUX_PAD(0x590, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_DQM1__DRAM_DQM1 IOMUX_PAD(0x594, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_PMIC_ON_REQ__PMIC_ON_REQ IOMUX_PAD(0x598, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_PMIC_STBY_REQ__PMIC_STBY_REQ IOMUX_PAD(0x59C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CLE__GPIO_6_7 IOMUX_PAD(0x5A0, 0x228,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_ALE__GPIO_6_8 IOMUX_PAD(0x5A4, 0x22C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_WP_B__GPIO_6_9 IOMUX_PAD(0x5A8, 0x230,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_RB0__GPIO_6_10 IOMUX_PAD(0x5AC, 0x234,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS0__GPIO_6_11 IOMUX_PAD(0x5B0, 0x238,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS1__GPIO_6_14 IOMUX_PAD(0x5B4, 0x23C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS2__GPIO_6_15 IOMUX_PAD(0x5B8, 0x240,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS3__GPIO_6_16 IOMUX_PAD(0x5BC, 0x244,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_NANDF__NVCC_NANDF IOMUX_PAD(0x5C0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_MDIO__GPIO_1_22 IOMUX_PAD(0x5C4, 0x248,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_REF_CLK__GPIO_1_23 IOMUX_PAD(0x5C8, 0x24C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_RX_ER__GPIO_1_24 IOMUX_PAD(0x5CC, 0x250,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_CRS_DV__GPIO_1_25 IOMUX_PAD(0x5D0, 0x254,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_RXD1__GPIO_1_26 IOMUX_PAD(0x5D4, 0x258,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_RXD0__GPIO_1_27 IOMUX_PAD(0x5D8, 0x25C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_TX_EN__GPIO_1_28 IOMUX_PAD(0x5DC, 0x260,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_TXD1__GPIO_1_29 IOMUX_PAD(0x5E0, 0x264,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_TXD0__GPIO_1_30 IOMUX_PAD(0x5E4, 0x268,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_MDC__GPIO_1_31 IOMUX_PAD(0x5E8, 0x26C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_FEC__NVCC_FEC IOMUX_PAD(0x5EC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DIOW__GPIO_6_17 IOMUX_PAD(0x5F0, 0x270,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DMACK__GPIO_6_18 IOMUX_PAD(0x5F4, 0x274,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DMARQ__GPIO_7_0 IOMUX_PAD(0x5F8, 0x278,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_BUFFER_EN__GPIO_7_1 IOMUX_PAD(0x5FC, 0x27C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_INTRQ__GPIO_7_2 IOMUX_PAD(0x600, 0x280,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DIOR__GPIO_7_3 IOMUX_PAD(0x604, 0x284,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_RESET_B__GPIO_7_4 IOMUX_PAD(0x608, 0x288,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_IORDY__GPIO_7_5 IOMUX_PAD(0x60C, 0x28C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DA_0__GPIO_7_6 IOMUX_PAD(0x610, 0x290,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DA_1__GPIO_7_7 IOMUX_PAD(0x614, 0x294,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DA_2__GPIO_7_8 IOMUX_PAD(0x618, 0x298,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_CS_0__GPIO_7_9 IOMUX_PAD(0x61C, 0x29C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_CS_1__GPIO_7_10 IOMUX_PAD(0x620, 0x2A0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_ATA2__NVCC_ATA2 IOMUX_PAD(0x624, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA0__GPIO_2_0 IOMUX_PAD(0x628, 0x2A4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA1__GPIO_2_1 IOMUX_PAD(0x62C, 0x2A8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA2__GPIO_2_2 IOMUX_PAD(0x630, 0x2AC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA3__GPIO_2_3 IOMUX_PAD(0x634, 0x2B0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA4__GPIO_2_4 IOMUX_PAD(0x638, 0x2B4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA5__GPIO_2_5 IOMUX_PAD(0x63C, 0x2B8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA6__GPIO_2_6 IOMUX_PAD(0x640, 0x2BC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA7__GPIO_2_7 IOMUX_PAD(0x644, 0x2C0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA8__GPIO_2_8 IOMUX_PAD(0x648, 0x2C4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA9__GPIO_2_9 IOMUX_PAD(0x64C, 0x2C8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA10__GPIO_2_10 IOMUX_PAD(0x650, 0x2CC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA11__GPIO_2_11 IOMUX_PAD(0x654, 0x2D0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA12__GPIO_2_12 IOMUX_PAD(0x658, 0x2D4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA13__GPIO_2_13 IOMUX_PAD(0x65C, 0x2D8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA14__GPIO_2_14 IOMUX_PAD(0x660, 0x2DC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA15__GPIO_2_15 IOMUX_PAD(0x664, 0x2E0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_ATA0__NVCC_ATA0 IOMUX_PAD(0x668, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA0__GPIO_1_16 IOMUX_PAD(0x66C, 0x2E4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA1__GPIO_1_17 IOMUX_PAD(0x670, 0x2E8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_CMD__GPIO_1_18 IOMUX_PAD(0x674, 0x2EC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA2__GPIO_1_19 IOMUX_PAD(0x678, 0x2F0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_CLK__GPIO_1_20 IOMUX_PAD(0x67C, 0x2F4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA3__GPIO_1_21 IOMUX_PAD(0x680, 0x2F8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_SD1__NVCC_SD1 IOMUX_PAD(0x684, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_CLK__GPIO_1_10 IOMUX_PAD(0x688, 0x2FC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_CMD__GPIO_1_11 IOMUX_PAD(0x68C, 0x300,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA3__GPIO_1_12 IOMUX_PAD(0x690, 0x304,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA2__GPIO_1_13 IOMUX_PAD(0x694, 0x308,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA1__GPIO_1_14 IOMUX_PAD(0x698, 0x30C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA0__GPIO_1_15 IOMUX_PAD(0x69C, 0x310,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_SD2__NVCC_SD2 IOMUX_PAD(0x6A0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_0__GPIO_1_0 IOMUX_PAD(0x6A4, 0x314,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_1__GPIO_1_1 IOMUX_PAD(0x6A8, 0x318,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_9__GPIO_1_9 IOMUX_PAD(0x6AC, 0x31C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_3__GPIO_1_3 IOMUX_PAD(0x6B0, 0x320,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_6__GPIO_1_6 IOMUX_PAD(0x6B4, 0x324,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_2__GPIO_1_2 IOMUX_PAD(0x6B8, 0x328,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_4__GPIO_1_4 IOMUX_PAD(0x6BC, 0x32C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_5__GPIO_1_5 IOMUX_PAD(0x6C0, 0x330,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_7__GPIO_1_7 IOMUX_PAD(0x6C4, 0x334,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_8__GPIO_1_8 IOMUX_PAD(0x6C8, 0x338,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_16__GPIO_7_11 IOMUX_PAD(0x6CC, 0x33C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_17__GPIO_7_12 IOMUX_PAD(0x6D0, 0x340,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_18__GPIO_7_13 IOMUX_PAD(0x6D4, 0x344,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_GPIO__NVCC_GPIO IOMUX_PAD(0x6D8, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_POR_B__POR_B IOMUX_PAD(0x6DC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_BOOT_MODE1__BOOT_MODE1 IOMUX_PAD(0x6E0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_RESET_IN_B__RESET_IN_B IOMUX_PAD(0x6E4, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_BOOT_MODE0__BOOT_MODE0 IOMUX_PAD(0x6E8, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_TEST_MODE__TEST_MODE IOMUX_PAD(0x6EC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_ADDDS__GRP_ADDDS IOMUX_PAD(0x6F0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_DDRMODE_CTL__GRP_DDRMODE_CTL IOMUX_PAD(0x6F4, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_DDRPKE__GRP_DDRPKE IOMUX_PAD(0x6FC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_DDRPK__GRP_DDRPK IOMUX_PAD(0x708, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_TERM_CTL3__GRP_TERM_CTL3 IOMUX_PAD(0x70C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_DDRHYS__GRP_DDRHYS IOMUX_PAD(0x710, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_DDRMODE__GRP_DDRMODE IOMUX_PAD(0x714, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_B0DS__GRP_B0DS IOMUX_PAD(0x718, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_B1DS__GRP_B1DS IOMUX_PAD(0x71C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_CTLDS__GRP_CTLDS IOMUX_PAD(0x720, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_DDR_TYPE__GRP_DDR_TYPE IOMUX_PAD(0x724, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_B2DS__GRP_B2DS IOMUX_PAD(0x728, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_B3DS__GRP_B3DS IOMUX_PAD(0x72C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_19__KPP_COL_5 (_MX53_PAD_GPIO_19__KPP_COL_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_19__GPIO4_5 (_MX53_PAD_GPIO_19__GPIO4_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_19__CCM_CLKO (_MX53_PAD_GPIO_19__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_19__SPDIF_OUT1 (_MX53_PAD_GPIO_19__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 (_MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_19__ECSPI1_RDY (_MX53_PAD_GPIO_19__ECSPI1_RDY | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_19__FEC_TDATA_3 (_MX53_PAD_GPIO_19__FEC_TDATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_19__SRC_INT_BOOT (_MX53_PAD_GPIO_19__SRC_INT_BOOT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL0__KPP_COL_0 (_MX53_PAD_KEY_COL0__KPP_COL_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL0__GPIO4_6 (_MX53_PAD_KEY_COL0__GPIO4_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC (_MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL0__UART4_TXD_MUX (_MX53_PAD_KEY_COL0__UART4_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL0__ECSPI1_SCLK (_MX53_PAD_KEY_COL0__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL0__FEC_RDATA_3 (_MX53_PAD_KEY_COL0__FEC_RDATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST (_MX53_PAD_KEY_COL0__SRC_ANY_PU_RST | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW0__KPP_ROW_0 (_MX53_PAD_KEY_ROW0__KPP_ROW_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW0__GPIO4_7 (_MX53_PAD_KEY_ROW0__GPIO4_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD (_MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX (_MX53_PAD_KEY_ROW0__UART4_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI (_MX53_PAD_KEY_ROW0__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW0__FEC_TX_ER (_MX53_PAD_KEY_ROW0__FEC_TX_ER | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL1__KPP_COL_1 (_MX53_PAD_KEY_COL1__KPP_COL_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL1__GPIO4_8 (_MX53_PAD_KEY_COL1__GPIO4_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS (_MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL1__UART5_TXD_MUX (_MX53_PAD_KEY_COL1__UART5_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL1__ECSPI1_MISO (_MX53_PAD_KEY_COL1__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL1__FEC_RX_CLK (_MX53_PAD_KEY_COL1__FEC_RX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY (_MX53_PAD_KEY_COL1__USBPHY1_TXREADY | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW1__KPP_ROW_1 (_MX53_PAD_KEY_ROW1__KPP_ROW_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW1__GPIO4_9 (_MX53_PAD_KEY_ROW1__GPIO4_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD (_MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX (_MX53_PAD_KEY_ROW1__UART5_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW1__ECSPI1_SS0 (_MX53_PAD_KEY_ROW1__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW1__FEC_COL (_MX53_PAD_KEY_ROW1__FEC_COL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID (_MX53_PAD_KEY_ROW1__USBPHY1_RXVALID | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL2__KPP_COL_2 (_MX53_PAD_KEY_COL2__KPP_COL_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL2__GPIO4_10 (_MX53_PAD_KEY_COL2__GPIO4_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL2__CAN1_TXCAN (_MX53_PAD_KEY_COL2__CAN1_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL2__FEC_MDIO (_MX53_PAD_KEY_COL2__FEC_MDIO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL2__ECSPI1_SS1 (_MX53_PAD_KEY_COL2__ECSPI1_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL2__FEC_RDATA_2 (_MX53_PAD_KEY_COL2__FEC_RDATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE (_MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW2__KPP_ROW_2 (_MX53_PAD_KEY_ROW2__KPP_ROW_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW2__GPIO4_11 (_MX53_PAD_KEY_ROW2__GPIO4_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW2__CAN1_RXCAN (_MX53_PAD_KEY_ROW2__CAN1_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW2__FEC_MDC (_MX53_PAD_KEY_ROW2__FEC_MDC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW2__ECSPI1_SS2 (_MX53_PAD_KEY_ROW2__ECSPI1_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW2__FEC_TDATA_2 (_MX53_PAD_KEY_ROW2__FEC_TDATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR (_MX53_PAD_KEY_ROW2__USBPHY1_RXERROR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL3__KPP_COL_3 (_MX53_PAD_KEY_COL3__KPP_COL_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL3__GPIO4_12 (_MX53_PAD_KEY_COL3__GPIO4_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL3__USBOH3_H2_DP (_MX53_PAD_KEY_COL3__USBOH3_H2_DP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL3__SPDIF_IN1 (_MX53_PAD_KEY_COL3__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL3__I2C2_SCL (_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL3__ECSPI1_SS3 (_MX53_PAD_KEY_COL3__ECSPI1_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL3__FEC_CRS (_MX53_PAD_KEY_COL3__FEC_CRS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK (_MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW3__KPP_ROW_3 (_MX53_PAD_KEY_ROW3__KPP_ROW_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW3__GPIO4_13 (_MX53_PAD_KEY_ROW3__GPIO4_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM (_MX53_PAD_KEY_ROW3__USBOH3_H2_DM | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK (_MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW3__I2C2_SDA (_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT (_MX53_PAD_KEY_ROW3__OSC32K_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP (_MX53_PAD_KEY_ROW3__CCM_PLL4_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 (_MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL4__KPP_COL_4 (_MX53_PAD_KEY_COL4__KPP_COL_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL4__GPIO4_14 (_MX53_PAD_KEY_COL4__GPIO4_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL4__CAN2_TXCAN (_MX53_PAD_KEY_COL4__CAN2_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL4__IPU_SISG_4 (_MX53_PAD_KEY_COL4__IPU_SISG_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL4__UART5_RTS (_MX53_PAD_KEY_COL4__UART5_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC (_MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 (_MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW4__KPP_ROW_4 (_MX53_PAD_KEY_ROW4__KPP_ROW_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW4__GPIO4_15 (_MX53_PAD_KEY_ROW4__GPIO4_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW4__CAN2_RXCAN (_MX53_PAD_KEY_ROW4__CAN2_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW4__IPU_SISG_5 (_MX53_PAD_KEY_ROW4__IPU_SISG_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW4__UART5_CTS (_MX53_PAD_KEY_ROW4__UART5_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR (_MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID (_MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK (_MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_DISP_CLK__GPIO4_16 (_MX53_PAD_DI0_DISP_CLK__GPIO4_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR (_MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 (_MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 (_MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID (_MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 (_MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN15__GPIO4_17 (_MX53_PAD_DI0_PIN15__GPIO4_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC (_MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 (_MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 (_MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID (_MX53_PAD_DI0_PIN15__USBPHY1_BVALID | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 (_MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN2__GPIO4_18 (_MX53_PAD_DI0_PIN2__GPIO4_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD (_MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 (_MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 (_MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION (_MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 (_MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN3__GPIO4_19 (_MX53_PAD_DI0_PIN3__GPIO4_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS (_MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 (_MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 (_MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG (_MX53_PAD_DI0_PIN3__USBPHY1_IDDIG | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 (_MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN4__GPIO4_20 (_MX53_PAD_DI0_PIN4__GPIO4_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD (_MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN4__ESDHC1_WP (_MX53_PAD_DI0_PIN4__ESDHC1_WP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD (_MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 (_MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT (_MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 (_MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT0__GPIO4_21 (_MX53_PAD_DISP0_DAT0__GPIO4_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT0__CSPI_SCLK (_MX53_PAD_DISP0_DAT0__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 (_MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN (_MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 (_MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY (_MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 (_MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT1__GPIO4_22 (_MX53_PAD_DISP0_DAT1__GPIO4_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT1__CSPI_MOSI (_MX53_PAD_DISP0_DAT1__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 (_MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL (_MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 (_MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID (_MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 (_MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT2__GPIO4_23 (_MX53_PAD_DISP0_DAT2__GPIO4_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT2__CSPI_MISO (_MX53_PAD_DISP0_DAT2__CSPI_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 (_MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE (_MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 (_MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE (_MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 (_MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT3__GPIO4_24 (_MX53_PAD_DISP0_DAT3__GPIO4_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT3__CSPI_SS0 (_MX53_PAD_DISP0_DAT3__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 (_MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR (_MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 (_MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR (_MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 (_MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT4__GPIO4_25 (_MX53_PAD_DISP0_DAT4__GPIO4_25 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT4__CSPI_SS1 (_MX53_PAD_DISP0_DAT4__CSPI_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 (_MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB (_MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 (_MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK (_MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 (_MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT5__GPIO4_26 (_MX53_PAD_DISP0_DAT5__GPIO4_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT5__CSPI_SS2 (_MX53_PAD_DISP0_DAT5__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 (_MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS (_MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 (_MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 (_MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 (_MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT6__GPIO4_27 (_MX53_PAD_DISP0_DAT6__GPIO4_27 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT6__CSPI_SS3 (_MX53_PAD_DISP0_DAT6__CSPI_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 (_MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE (_MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 (_MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 (_MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 (_MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT7__GPIO4_28 (_MX53_PAD_DISP0_DAT7__GPIO4_28 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT7__CSPI_RDY (_MX53_PAD_DISP0_DAT7__CSPI_RDY | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 (_MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 (_MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 (_MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID (_MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 (_MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT8__GPIO4_29 (_MX53_PAD_DISP0_DAT8__GPIO4_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT8__PWM1_PWMO (_MX53_PAD_DISP0_DAT8__PWM1_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B (_MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 (_MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 (_MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID (_MX53_PAD_DISP0_DAT8__USBPHY2_AVALID | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 (_MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT9__GPIO4_30 (_MX53_PAD_DISP0_DAT9__GPIO4_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT9__PWM2_PWMO (_MX53_PAD_DISP0_DAT9__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B (_MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 (_MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 (_MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 (_MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 (_MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT10__GPIO4_31 (_MX53_PAD_DISP0_DAT10__GPIO4_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP (_MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 (_MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 (_MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 (_MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 (_MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT11__GPIO5_5 (_MX53_PAD_DISP0_DAT11__GPIO5_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT (_MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 (_MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 (_MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 (_MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 (_MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT12__GPIO5_6 (_MX53_PAD_DISP0_DAT12__GPIO5_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK (_MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 (_MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 (_MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 (_MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 (_MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT13__GPIO5_7 (_MX53_PAD_DISP0_DAT13__GPIO5_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS (_MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 (_MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 (_MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 (_MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 (_MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT14__GPIO5_8 (_MX53_PAD_DISP0_DAT14__GPIO5_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC (_MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 (_MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 (_MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 (_MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 (_MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT15__GPIO5_9 (_MX53_PAD_DISP0_DAT15__GPIO5_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1 (_MX53_PAD_DISP0_DAT15__ECSPI1_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1 (_MX53_PAD_DISP0_DAT15__ECSPI2_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 (_MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 (_MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 (_MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 (_MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT16__GPIO5_10 (_MX53_PAD_DISP0_DAT16__GPIO5_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI (_MX53_PAD_DISP0_DAT16__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC (_MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 (_MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 (_MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 (_MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 (_MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 (_MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT17__GPIO5_11 (_MX53_PAD_DISP0_DAT17__GPIO5_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO (_MX53_PAD_DISP0_DAT17__ECSPI2_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD (_MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 (_MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 (_MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 (_MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 (_MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT18__GPIO5_12 (_MX53_PAD_DISP0_DAT18__GPIO5_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0 (_MX53_PAD_DISP0_DAT18__ECSPI2_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS (_MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS (_MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 (_MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 (_MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 (_MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 (_MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT19__GPIO5_13 (_MX53_PAD_DISP0_DAT19__GPIO5_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK (_MX53_PAD_DISP0_DAT19__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD (_MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC (_MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 (_MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 (_MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 (_MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 (_MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT20__GPIO5_14 (_MX53_PAD_DISP0_DAT20__GPIO5_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK (_MX53_PAD_DISP0_DAT20__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC (_MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 (_MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 (_MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI (_MX53_PAD_DISP0_DAT20__SATA_PHY_TDI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 (_MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT21__GPIO5_15 (_MX53_PAD_DISP0_DAT21__GPIO5_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI (_MX53_PAD_DISP0_DAT21__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD (_MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 (_MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 (_MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO (_MX53_PAD_DISP0_DAT21__SATA_PHY_TDO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 (_MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT22__GPIO5_16 (_MX53_PAD_DISP0_DAT22__GPIO5_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO (_MX53_PAD_DISP0_DAT22__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS (_MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 (_MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 (_MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK (_MX53_PAD_DISP0_DAT22__SATA_PHY_TCK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 (_MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT23__GPIO5_17 (_MX53_PAD_DISP0_DAT23__GPIO5_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0 (_MX53_PAD_DISP0_DAT23__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD (_MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 (_MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 (_MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS (_MX53_PAD_DISP0_DAT23__SATA_PHY_TMS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK (_MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_PIXCLK__GPIO5_18 (_MX53_PAD_CSI0_PIXCLK__GPIO5_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 (_MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 (_MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC (_MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_MCLK__GPIO5_19 (_MX53_PAD_CSI0_MCLK__GPIO5_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK (_MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 (_MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 (_MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL (_MX53_PAD_CSI0_MCLK__TPIU_TRCTL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN (_MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DATA_EN__GPIO5_20 (_MX53_PAD_CSI0_DATA_EN__GPIO5_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 (_MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 (_MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK (_MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC (_MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_VSYNC__GPIO5_21 (_MX53_PAD_CSI0_VSYNC__GPIO5_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 (_MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 (_MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 (_MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 (_MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT4__GPIO5_22 (_MX53_PAD_CSI0_DAT4__GPIO5_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT4__KPP_COL_5 (_MX53_PAD_CSI0_DAT4__KPP_COL_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK (_MX53_PAD_CSI0_DAT4__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP (_MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC (_MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 (_MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 (_MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 (_MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT5__GPIO5_23 (_MX53_PAD_CSI0_DAT5__GPIO5_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT5__KPP_ROW_5 (_MX53_PAD_CSI0_DAT5__KPP_ROW_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI (_MX53_PAD_CSI0_DAT5__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT (_MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD (_MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 (_MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 (_MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 (_MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT6__GPIO5_24 (_MX53_PAD_CSI0_DAT6__GPIO5_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT6__KPP_COL_6 (_MX53_PAD_CSI0_DAT6__KPP_COL_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO (_MX53_PAD_CSI0_DAT6__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK (_MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS (_MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 (_MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 (_MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 (_MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT7__GPIO5_25 (_MX53_PAD_CSI0_DAT7__GPIO5_25 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT7__KPP_ROW_6 (_MX53_PAD_CSI0_DAT7__KPP_ROW_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0 (_MX53_PAD_CSI0_DAT7__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR (_MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD (_MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 (_MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 (_MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 (_MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT8__GPIO5_26 (_MX53_PAD_CSI0_DAT8__GPIO5_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT8__KPP_COL_7 (_MX53_PAD_CSI0_DAT8__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK (_MX53_PAD_CSI0_DAT8__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC (_MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT8__I2C1_SDA (_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 (_MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 (_MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 (_MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT9__GPIO5_27 (_MX53_PAD_CSI0_DAT9__GPIO5_27 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT9__KPP_ROW_7 (_MX53_PAD_CSI0_DAT9__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI (_MX53_PAD_CSI0_DAT9__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR (_MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT9__I2C1_SCL (_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 (_MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 (_MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 (_MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT10__GPIO5_28 (_MX53_PAD_CSI0_DAT10__GPIO5_28 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX (_MX53_PAD_CSI0_DAT10__UART1_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO (_MX53_PAD_CSI0_DAT10__ECSPI2_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC (_MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 (_MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 (_MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 (_MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 (_MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT11__GPIO5_29 (_MX53_PAD_CSI0_DAT11__GPIO5_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX (_MX53_PAD_CSI0_DAT11__UART1_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0 (_MX53_PAD_CSI0_DAT11__ECSPI2_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS (_MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 (_MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 (_MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 (_MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 (_MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT12__GPIO5_30 (_MX53_PAD_CSI0_DAT12__GPIO5_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX (_MX53_PAD_CSI0_DAT12__UART4_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 (_MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 (_MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 (_MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 (_MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 (_MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT13__GPIO5_31 (_MX53_PAD_CSI0_DAT13__GPIO5_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX (_MX53_PAD_CSI0_DAT13__UART4_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 (_MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 (_MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 (_MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 (_MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 (_MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT14__GPIO6_0 (_MX53_PAD_CSI0_DAT14__GPIO6_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX (_MX53_PAD_CSI0_DAT14__UART5_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 (_MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 (_MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 (_MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 (_MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 (_MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT15__GPIO6_1 (_MX53_PAD_CSI0_DAT15__GPIO6_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX (_MX53_PAD_CSI0_DAT15__UART5_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 (_MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 (_MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 (_MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 (_MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 (_MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT16__GPIO6_2 (_MX53_PAD_CSI0_DAT16__GPIO6_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT16__UART4_RTS (_MX53_PAD_CSI0_DAT16__UART4_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 (_MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 (_MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 (_MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 (_MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 (_MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT17__GPIO6_3 (_MX53_PAD_CSI0_DAT17__GPIO6_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT17__UART4_CTS (_MX53_PAD_CSI0_DAT17__UART4_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 (_MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 (_MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 (_MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 (_MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 (_MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT18__GPIO6_4 (_MX53_PAD_CSI0_DAT18__GPIO6_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT18__UART5_RTS (_MX53_PAD_CSI0_DAT18__UART5_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 (_MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 (_MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 (_MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 (_MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 (_MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT19__GPIO6_5 (_MX53_PAD_CSI0_DAT19__GPIO6_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT19__UART5_CTS (_MX53_PAD_CSI0_DAT19__UART5_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 (_MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 (_MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 (_MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK (_MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A25__EMI_WEIM_A_25 (_MX53_PAD_EIM_A25__EMI_WEIM_A_25 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A25__GPIO5_2 (_MX53_PAD_EIM_A25__GPIO5_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A25__ECSPI2_RDY (_MX53_PAD_EIM_A25__ECSPI2_RDY | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A25__IPU_DI1_PIN12 (_MX53_PAD_EIM_A25__IPU_DI1_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A25__CSPI_SS1 (_MX53_PAD_EIM_A25__CSPI_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS (_MX53_PAD_EIM_A25__IPU_DI0_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A25__USBPHY1_BISTOK (_MX53_PAD_EIM_A25__USBPHY1_BISTOK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 (_MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB2__GPIO2_30 (_MX53_PAD_EIM_EB2__GPIO2_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK (_MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS (_MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB2__ECSPI1_SS0 (_MX53_PAD_EIM_EB2__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB2__I2C2_SCL (_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D16__EMI_WEIM_D_16 (_MX53_PAD_EIM_D16__EMI_WEIM_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D16__GPIO3_16 (_MX53_PAD_EIM_D16__GPIO3_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D16__IPU_DI0_PIN5 (_MX53_PAD_EIM_D16__IPU_DI0_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK (_MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D16__ECSPI1_SCLK (_MX53_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D16__I2C2_SDA (_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D17__EMI_WEIM_D_17 (_MX53_PAD_EIM_D17__EMI_WEIM_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D17__GPIO3_17 (_MX53_PAD_EIM_D17__GPIO3_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D17__IPU_DI0_PIN6 (_MX53_PAD_EIM_D17__IPU_DI0_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN (_MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D17__ECSPI1_MISO (_MX53_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D17__I2C3_SCL (_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D18__EMI_WEIM_D_18 (_MX53_PAD_EIM_D18__EMI_WEIM_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D18__GPIO3_18 (_MX53_PAD_EIM_D18__GPIO3_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D18__IPU_DI0_PIN7 (_MX53_PAD_EIM_D18__IPU_DI0_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO (_MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D18__ECSPI1_MOSI (_MX53_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D18__I2C3_SDA (_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS (_MX53_PAD_EIM_D18__IPU_DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D19__EMI_WEIM_D_19 (_MX53_PAD_EIM_D19__EMI_WEIM_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D19__GPIO3_19 (_MX53_PAD_EIM_D19__GPIO3_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D19__IPU_DI0_PIN8 (_MX53_PAD_EIM_D19__IPU_DI0_PIN8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS (_MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D19__ECSPI1_SS1 (_MX53_PAD_EIM_D19__ECSPI1_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D19__EPIT1_EPITO (_MX53_PAD_EIM_D19__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D19__UART1_CTS (_MX53_PAD_EIM_D19__UART1_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC (_MX53_PAD_EIM_D19__USBOH3_USBH2_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D20__EMI_WEIM_D_20 (_MX53_PAD_EIM_D20__EMI_WEIM_D_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D20__GPIO3_20 (_MX53_PAD_EIM_D20__GPIO3_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D20__IPU_DI0_PIN16 (_MX53_PAD_EIM_D20__IPU_DI0_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS (_MX53_PAD_EIM_D20__IPU_SER_DISP0_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D20__CSPI_SS0 (_MX53_PAD_EIM_D20__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D20__EPIT2_EPITO (_MX53_PAD_EIM_D20__EPIT2_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D20__UART1_RTS (_MX53_PAD_EIM_D20__UART1_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR (_MX53_PAD_EIM_D20__USBOH3_USBH2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D21__EMI_WEIM_D_21 (_MX53_PAD_EIM_D21__EMI_WEIM_D_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D21__GPIO3_21 (_MX53_PAD_EIM_D21__GPIO3_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D21__IPU_DI0_PIN17 (_MX53_PAD_EIM_D21__IPU_DI0_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK (_MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D21__CSPI_SCLK (_MX53_PAD_EIM_D21__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D21__I2C1_SCL (_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC (_MX53_PAD_EIM_D21__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D22__EMI_WEIM_D_22 (_MX53_PAD_EIM_D22__EMI_WEIM_D_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D22__GPIO3_22 (_MX53_PAD_EIM_D22__GPIO3_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D22__IPU_DI0_PIN1 (_MX53_PAD_EIM_D22__IPU_DI0_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN (_MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D22__CSPI_MISO (_MX53_PAD_EIM_D22__CSPI_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR (_MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D23__EMI_WEIM_D_23 (_MX53_PAD_EIM_D23__EMI_WEIM_D_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D23__GPIO3_23 (_MX53_PAD_EIM_D23__GPIO3_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D23__UART3_CTS (_MX53_PAD_EIM_D23__UART3_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D23__UART1_DCD (_MX53_PAD_EIM_D23__UART1_DCD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS (_MX53_PAD_EIM_D23__IPU_DI0_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D23__IPU_DI1_PIN2 (_MX53_PAD_EIM_D23__IPU_DI1_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN (_MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D23__IPU_DI1_PIN14 (_MX53_PAD_EIM_D23__IPU_DI1_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 (_MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB3__GPIO2_31 (_MX53_PAD_EIM_EB3__GPIO2_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB3__UART3_RTS (_MX53_PAD_EIM_EB3__UART3_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB3__UART1_RI (_MX53_PAD_EIM_EB3__UART1_RI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3 (_MX53_PAD_EIM_EB3__IPU_DI1_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC (_MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16 (_MX53_PAD_EIM_EB3__IPU_DI1_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D24__EMI_WEIM_D_24 (_MX53_PAD_EIM_D24__EMI_WEIM_D_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D24__GPIO3_24 (_MX53_PAD_EIM_D24__GPIO3_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D24__UART3_TXD_MUX (_MX53_PAD_EIM_D24__UART3_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D24__ECSPI1_SS2 (_MX53_PAD_EIM_D24__ECSPI1_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D24__CSPI_SS2 (_MX53_PAD_EIM_D24__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS (_MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D24__ECSPI2_SS2 (_MX53_PAD_EIM_D24__ECSPI2_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D24__UART1_DTR (_MX53_PAD_EIM_D24__UART1_DTR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D25__EMI_WEIM_D_25 (_MX53_PAD_EIM_D25__EMI_WEIM_D_25 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D25__GPIO3_25 (_MX53_PAD_EIM_D25__GPIO3_25 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D25__UART3_RXD_MUX (_MX53_PAD_EIM_D25__UART3_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D25__ECSPI1_SS3 (_MX53_PAD_EIM_D25__ECSPI1_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D25__CSPI_SS3 (_MX53_PAD_EIM_D25__CSPI_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC (_MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D25__ECSPI2_SS3 (_MX53_PAD_EIM_D25__ECSPI2_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D25__UART1_DSR (_MX53_PAD_EIM_D25__UART1_DSR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D26__EMI_WEIM_D_26 (_MX53_PAD_EIM_D26__EMI_WEIM_D_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D26__GPIO3_26 (_MX53_PAD_EIM_D26__GPIO3_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D26__UART2_TXD_MUX (_MX53_PAD_EIM_D26__UART2_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D26__FIRI_RXD (_MX53_PAD_EIM_D26__FIRI_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D26__IPU_CSI0_D_1 (_MX53_PAD_EIM_D26__IPU_CSI0_D_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D26__IPU_DI1_PIN11 (_MX53_PAD_EIM_D26__IPU_DI1_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D26__IPU_SISG_2 (_MX53_PAD_EIM_D26__IPU_SISG_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 (_MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D27__EMI_WEIM_D_27 (_MX53_PAD_EIM_D27__EMI_WEIM_D_27 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D27__GPIO3_27 (_MX53_PAD_EIM_D27__GPIO3_27 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D27__UART2_RXD_MUX (_MX53_PAD_EIM_D27__UART2_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D27__FIRI_TXD (_MX53_PAD_EIM_D27__FIRI_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D27__IPU_CSI0_D_0 (_MX53_PAD_EIM_D27__IPU_CSI0_D_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D27__IPU_DI1_PIN13 (_MX53_PAD_EIM_D27__IPU_DI1_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D27__IPU_SISG_3 (_MX53_PAD_EIM_D27__IPU_SISG_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 (_MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__EMI_WEIM_D_28 (_MX53_PAD_EIM_D28__EMI_WEIM_D_28 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__GPIO3_28 (_MX53_PAD_EIM_D28__GPIO3_28 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__UART2_CTS (_MX53_PAD_EIM_D28__UART2_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO (_MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__CSPI_MOSI (_MX53_PAD_EIM_D28__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__I2C1_SDA (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__IPU_EXT_TRIG (_MX53_PAD_EIM_D28__IPU_EXT_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__IPU_DI0_PIN13 (_MX53_PAD_EIM_D28__IPU_DI0_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D29__EMI_WEIM_D_29 (_MX53_PAD_EIM_D29__EMI_WEIM_D_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D29__GPIO3_29 (_MX53_PAD_EIM_D29__GPIO3_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D29__UART2_RTS (_MX53_PAD_EIM_D29__UART2_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS (_MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D29__CSPI_SS0 (_MX53_PAD_EIM_D29__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D29__IPU_DI1_PIN15 (_MX53_PAD_EIM_D29__IPU_DI1_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC (_MX53_PAD_EIM_D29__IPU_CSI1_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D29__IPU_DI0_PIN14 (_MX53_PAD_EIM_D29__IPU_DI0_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D30__EMI_WEIM_D_30 (_MX53_PAD_EIM_D30__EMI_WEIM_D_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D30__GPIO3_30 (_MX53_PAD_EIM_D30__GPIO3_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D30__UART3_CTS (_MX53_PAD_EIM_D30__UART3_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D30__IPU_CSI0_D_3 (_MX53_PAD_EIM_D30__IPU_CSI0_D_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D30__IPU_DI0_PIN11 (_MX53_PAD_EIM_D30__IPU_DI0_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 (_MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC (_MX53_PAD_EIM_D30__USBOH3_USBH1_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC (_MX53_PAD_EIM_D30__USBOH3_USBH2_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D31__EMI_WEIM_D_31 (_MX53_PAD_EIM_D31__EMI_WEIM_D_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D31__GPIO3_31 (_MX53_PAD_EIM_D31__GPIO3_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D31__UART3_RTS (_MX53_PAD_EIM_D31__UART3_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D31__IPU_CSI0_D_2 (_MX53_PAD_EIM_D31__IPU_CSI0_D_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D31__IPU_DI0_PIN12 (_MX53_PAD_EIM_D31__IPU_DI0_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 (_MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR (_MX53_PAD_EIM_D31__USBOH3_USBH1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR (_MX53_PAD_EIM_D31__USBOH3_USBH2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A24__EMI_WEIM_A_24 (_MX53_PAD_EIM_A24__EMI_WEIM_A_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A24__GPIO5_4 (_MX53_PAD_EIM_A24__GPIO5_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 (_MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A24__IPU_CSI1_D_19 (_MX53_PAD_EIM_A24__IPU_CSI1_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A24__IPU_SISG_2 (_MX53_PAD_EIM_A24__IPU_SISG_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A24__USBPHY2_BVALID (_MX53_PAD_EIM_A24__USBPHY2_BVALID | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A23__EMI_WEIM_A_23 (_MX53_PAD_EIM_A23__EMI_WEIM_A_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A23__GPIO6_6 (_MX53_PAD_EIM_A23__GPIO6_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 (_MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A23__IPU_CSI1_D_18 (_MX53_PAD_EIM_A23__IPU_CSI1_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A23__IPU_SISG_3 (_MX53_PAD_EIM_A23__IPU_SISG_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION (_MX53_PAD_EIM_A23__USBPHY2_ENDSESSION | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A22__EMI_WEIM_A_22 (_MX53_PAD_EIM_A22__EMI_WEIM_A_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A22__GPIO2_16 (_MX53_PAD_EIM_A22__GPIO2_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 (_MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A22__IPU_CSI1_D_17 (_MX53_PAD_EIM_A22__IPU_CSI1_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7 (_MX53_PAD_EIM_A22__SRC_BT_CFG1_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A21__EMI_WEIM_A_21 (_MX53_PAD_EIM_A21__EMI_WEIM_A_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A21__GPIO2_17 (_MX53_PAD_EIM_A21__GPIO2_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 (_MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A21__IPU_CSI1_D_16 (_MX53_PAD_EIM_A21__IPU_CSI1_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6 (_MX53_PAD_EIM_A21__SRC_BT_CFG1_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A20__EMI_WEIM_A_20 (_MX53_PAD_EIM_A20__EMI_WEIM_A_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A20__GPIO2_18 (_MX53_PAD_EIM_A20__GPIO2_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 (_MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A20__IPU_CSI1_D_15 (_MX53_PAD_EIM_A20__IPU_CSI1_D_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5 (_MX53_PAD_EIM_A20__SRC_BT_CFG1_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A19__EMI_WEIM_A_19 (_MX53_PAD_EIM_A19__EMI_WEIM_A_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A19__GPIO2_19 (_MX53_PAD_EIM_A19__GPIO2_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 (_MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A19__IPU_CSI1_D_14 (_MX53_PAD_EIM_A19__IPU_CSI1_D_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4 (_MX53_PAD_EIM_A19__SRC_BT_CFG1_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A18__EMI_WEIM_A_18 (_MX53_PAD_EIM_A18__EMI_WEIM_A_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A18__GPIO2_20 (_MX53_PAD_EIM_A18__GPIO2_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 (_MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A18__IPU_CSI1_D_13 (_MX53_PAD_EIM_A18__IPU_CSI1_D_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3 (_MX53_PAD_EIM_A18__SRC_BT_CFG1_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A17__EMI_WEIM_A_17 (_MX53_PAD_EIM_A17__EMI_WEIM_A_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A17__GPIO2_21 (_MX53_PAD_EIM_A17__GPIO2_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 (_MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A17__IPU_CSI1_D_12 (_MX53_PAD_EIM_A17__IPU_CSI1_D_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2 (_MX53_PAD_EIM_A17__SRC_BT_CFG1_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A16__EMI_WEIM_A_16 (_MX53_PAD_EIM_A16__EMI_WEIM_A_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A16__GPIO2_22 (_MX53_PAD_EIM_A16__GPIO2_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK (_MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK (_MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1 (_MX53_PAD_EIM_A16__SRC_BT_CFG1_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 (_MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_CS0__GPIO2_23 (_MX53_PAD_EIM_CS0__GPIO2_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_CS0__ECSPI2_SCLK (_MX53_PAD_EIM_CS0__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5 (_MX53_PAD_EIM_CS0__IPU_DI1_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 (_MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_CS1__GPIO2_24 (_MX53_PAD_EIM_CS1__GPIO2_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_CS1__ECSPI2_MOSI (_MX53_PAD_EIM_CS1__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6 (_MX53_PAD_EIM_CS1__IPU_DI1_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_OE__EMI_WEIM_OE (_MX53_PAD_EIM_OE__EMI_WEIM_OE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_OE__GPIO2_25 (_MX53_PAD_EIM_OE__GPIO2_25 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_OE__ECSPI2_MISO (_MX53_PAD_EIM_OE__ECSPI2_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_OE__IPU_DI1_PIN7 (_MX53_PAD_EIM_OE__IPU_DI1_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_OE__USBPHY2_IDDIG (_MX53_PAD_EIM_OE__USBPHY2_IDDIG | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_RW__EMI_WEIM_RW (_MX53_PAD_EIM_RW__EMI_WEIM_RW | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_RW__GPIO2_26 (_MX53_PAD_EIM_RW__GPIO2_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_RW__ECSPI2_SS0 (_MX53_PAD_EIM_RW__ECSPI2_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_RW__IPU_DI1_PIN8 (_MX53_PAD_EIM_RW__IPU_DI1_PIN8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT (_MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA (_MX53_PAD_EIM_LBA__EMI_WEIM_LBA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_LBA__GPIO2_27 (_MX53_PAD_EIM_LBA__GPIO2_27 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_LBA__ECSPI2_SS1 (_MX53_PAD_EIM_LBA__ECSPI2_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17 (_MX53_PAD_EIM_LBA__IPU_DI1_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 (_MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 (_MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB0__GPIO2_28 (_MX53_PAD_EIM_EB0__GPIO2_28 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 (_MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11 (_MX53_PAD_EIM_EB0__IPU_CSI1_D_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY (_MX53_PAD_EIM_EB0__GPC_PMIC_RDY | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 (_MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 (_MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB1__GPIO2_29 (_MX53_PAD_EIM_EB1__GPIO2_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 (_MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10 (_MX53_PAD_EIM_EB1__IPU_CSI1_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 (_MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 (_MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA0__GPIO3_0 (_MX53_PAD_EIM_DA0__GPIO3_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 (_MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9 (_MX53_PAD_EIM_DA0__IPU_CSI1_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 (_MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 (_MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA1__GPIO3_1 (_MX53_PAD_EIM_DA1__GPIO3_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 (_MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8 (_MX53_PAD_EIM_DA1__IPU_CSI1_D_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 (_MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 (_MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA2__GPIO3_2 (_MX53_PAD_EIM_DA2__GPIO3_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 (_MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7 (_MX53_PAD_EIM_DA2__IPU_CSI1_D_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 (_MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 (_MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA3__GPIO3_3 (_MX53_PAD_EIM_DA3__GPIO3_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 (_MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6 (_MX53_PAD_EIM_DA3__IPU_CSI1_D_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 (_MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 (_MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA4__GPIO3_4 (_MX53_PAD_EIM_DA4__GPIO3_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 (_MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5 (_MX53_PAD_EIM_DA4__IPU_CSI1_D_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 (_MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 (_MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA5__GPIO3_5 (_MX53_PAD_EIM_DA5__GPIO3_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 (_MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4 (_MX53_PAD_EIM_DA5__IPU_CSI1_D_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 (_MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 (_MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA6__GPIO3_6 (_MX53_PAD_EIM_DA6__GPIO3_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 (_MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3 (_MX53_PAD_EIM_DA6__IPU_CSI1_D_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 (_MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 (_MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA7__GPIO3_7 (_MX53_PAD_EIM_DA7__GPIO3_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 (_MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2 (_MX53_PAD_EIM_DA7__IPU_CSI1_D_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 (_MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 (_MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA8__GPIO3_8 (_MX53_PAD_EIM_DA8__GPIO3_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 (_MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1 (_MX53_PAD_EIM_DA8__IPU_CSI1_D_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 (_MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 (_MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA9__GPIO3_9 (_MX53_PAD_EIM_DA9__GPIO3_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 (_MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0 (_MX53_PAD_EIM_DA9__IPU_CSI1_D_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 (_MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 (_MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA10__GPIO3_10 (_MX53_PAD_EIM_DA10__GPIO3_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15 (_MX53_PAD_EIM_DA10__IPU_DI1_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN (_MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 (_MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 (_MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA11__GPIO3_11 (_MX53_PAD_EIM_DA11__GPIO3_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2 (_MX53_PAD_EIM_DA11__IPU_DI1_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC (_MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 (_MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA12__GPIO3_12 (_MX53_PAD_EIM_DA12__GPIO3_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3 (_MX53_PAD_EIM_DA12__IPU_DI1_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC (_MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 (_MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA13__GPIO3_13 (_MX53_PAD_EIM_DA13__GPIO3_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS (_MX53_PAD_EIM_DA13__IPU_DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK (_MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 (_MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA14__GPIO3_14 (_MX53_PAD_EIM_DA14__GPIO3_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS (_MX53_PAD_EIM_DA14__IPU_DI1_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK (_MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 (_MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA15__GPIO3_15 (_MX53_PAD_EIM_DA15__GPIO3_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1 (_MX53_PAD_EIM_DA15__IPU_DI1_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4 (_MX53_PAD_EIM_DA15__IPU_DI1_PIN4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B (_MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_WE_B__GPIO6_12 (_MX53_PAD_NANDF_WE_B__GPIO6_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B (_MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_RE_B__GPIO6_13 (_MX53_PAD_NANDF_RE_B__GPIO6_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT (_MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_WAIT__GPIO5_0 (_MX53_PAD_EIM_WAIT__GPIO5_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B (_MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS1_TX3_P__GPIO6_22 (_MX53_PAD_LVDS1_TX3_P__GPIO6_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 (_MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS1_TX2_P__GPIO6_24 (_MX53_PAD_LVDS1_TX2_P__GPIO6_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 (_MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS1_CLK_P__GPIO6_26 (_MX53_PAD_LVDS1_CLK_P__GPIO6_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK (_MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS1_TX1_P__GPIO6_28 (_MX53_PAD_LVDS1_TX1_P__GPIO6_28 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 (_MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS1_TX0_P__GPIO6_30 (_MX53_PAD_LVDS1_TX0_P__GPIO6_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 (_MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS0_TX3_P__GPIO7_22 (_MX53_PAD_LVDS0_TX3_P__GPIO7_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 (_MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS0_CLK_P__GPIO7_24 (_MX53_PAD_LVDS0_CLK_P__GPIO7_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK (_MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS0_TX2_P__GPIO7_26 (_MX53_PAD_LVDS0_TX2_P__GPIO7_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 (_MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS0_TX1_P__GPIO7_28 (_MX53_PAD_LVDS0_TX1_P__GPIO7_28 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 (_MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS0_TX0_P__GPIO7_30 (_MX53_PAD_LVDS0_TX0_P__GPIO7_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 (_MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_10__GPIO4_0 (_MX53_PAD_GPIO_10__GPIO4_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_10__OSC32k_32K_OUT (_MX53_PAD_GPIO_10__OSC32k_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_11__GPIO4_1 (_MX53_PAD_GPIO_11__GPIO4_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_12__GPIO4_2 (_MX53_PAD_GPIO_12__GPIO4_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_13__GPIO4_3 (_MX53_PAD_GPIO_13__GPIO4_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_14__GPIO4_4 (_MX53_PAD_GPIO_14__GPIO4_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE (_MX53_PAD_NANDF_CLE__EMI_NANDF_CLE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CLE__GPIO6_7 (_MX53_PAD_NANDF_CLE__GPIO6_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 (_MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE (_MX53_PAD_NANDF_ALE__EMI_NANDF_ALE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_ALE__GPIO6_8 (_MX53_PAD_NANDF_ALE__GPIO6_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 (_MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B (_MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_WP_B__GPIO6_9 (_MX53_PAD_NANDF_WP_B__GPIO6_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 (_MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 (_MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_RB0__GPIO6_10 (_MX53_PAD_NANDF_RB0__GPIO6_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 (_MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 (_MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS0__GPIO6_11 (_MX53_PAD_NANDF_CS0__GPIO6_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 (_MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 (_MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS1__GPIO6_14 (_MX53_PAD_NANDF_CS1__GPIO6_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS1__MLB_MLBCLK (_MX53_PAD_NANDF_CS1__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 (_MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 (_MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS2__GPIO6_15 (_MX53_PAD_NANDF_CS2__GPIO6_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS2__IPU_SISG_0 (_MX53_PAD_NANDF_CS2__IPU_SISG_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS2__ESAI1_TX0 (_MX53_PAD_NANDF_CS2__ESAI1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE (_MX53_PAD_NANDF_CS2__EMI_WEIM_CRE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK (_MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS2__MLB_MLBSIG (_MX53_PAD_NANDF_CS2__MLB_MLBSIG | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 (_MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 (_MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS3__GPIO6_16 (_MX53_PAD_NANDF_CS3__GPIO6_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS3__IPU_SISG_1 (_MX53_PAD_NANDF_CS3__IPU_SISG_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS3__ESAI1_TX1 (_MX53_PAD_NANDF_CS3__ESAI1_TX1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 (_MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS3__MLB_MLBDAT (_MX53_PAD_NANDF_CS3__MLB_MLBDAT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 (_MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDIO__FEC_MDIO (_MX53_PAD_FEC_MDIO__FEC_MDIO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDIO__GPIO1_22 (_MX53_PAD_FEC_MDIO__GPIO1_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDIO__ESAI1_SCKR (_MX53_PAD_FEC_MDIO__ESAI1_SCKR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDIO__FEC_COL (_MX53_PAD_FEC_MDIO__FEC_COL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 (_MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 (_MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 (_MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK (_MX53_PAD_FEC_REF_CLK__FEC_TX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_REF_CLK__GPIO1_23 (_MX53_PAD_FEC_REF_CLK__GPIO1_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR (_MX53_PAD_FEC_REF_CLK__ESAI1_FSR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 (_MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 (_MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RX_ER__FEC_RX_ER (_MX53_PAD_FEC_RX_ER__FEC_RX_ER | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RX_ER__GPIO1_24 (_MX53_PAD_FEC_RX_ER__GPIO1_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR (_MX53_PAD_FEC_RX_ER__ESAI1_HCKR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK (_MX53_PAD_FEC_RX_ER__FEC_RX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 (_MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV (_MX53_PAD_FEC_CRS_DV__FEC_RX_DV | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_CRS_DV__GPIO1_25 (_MX53_PAD_FEC_CRS_DV__GPIO1_25 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT (_MX53_PAD_FEC_CRS_DV__ESAI1_SCKT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RXD1__FEC_RDATA_1 (_MX53_PAD_FEC_RXD1__FEC_RDATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RXD1__GPIO1_26 (_MX53_PAD_FEC_RXD1__GPIO1_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RXD1__ESAI1_FST (_MX53_PAD_FEC_RXD1__ESAI1_FST | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RXD1__MLB_MLBSIG (_MX53_PAD_FEC_RXD1__MLB_MLBSIG | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 (_MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RXD0__FEC_RDATA_0 (_MX53_PAD_FEC_RXD0__FEC_RDATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RXD0__GPIO1_27 (_MX53_PAD_FEC_RXD0__GPIO1_27 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RXD0__ESAI1_HCKT (_MX53_PAD_FEC_RXD0__ESAI1_HCKT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT (_MX53_PAD_FEC_RXD0__OSC32k_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TX_EN__FEC_TX_EN (_MX53_PAD_FEC_TX_EN__FEC_TX_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TX_EN__GPIO1_28 (_MX53_PAD_FEC_TX_EN__GPIO1_28 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 (_MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TXD1__FEC_TDATA_1 (_MX53_PAD_FEC_TXD1__FEC_TDATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TXD1__GPIO1_29 (_MX53_PAD_FEC_TXD1__GPIO1_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 (_MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TXD1__MLB_MLBCLK (_MX53_PAD_FEC_TXD1__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK (_MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TXD0__FEC_TDATA_0 (_MX53_PAD_FEC_TXD0__FEC_TDATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TXD0__GPIO1_30 (_MX53_PAD_FEC_TXD0__GPIO1_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 (_MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 (_MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDC__FEC_MDC (_MX53_PAD_FEC_MDC__FEC_MDC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDC__GPIO1_31 (_MX53_PAD_FEC_MDC__GPIO1_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 (_MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDC__MLB_MLBDAT (_MX53_PAD_FEC_MDC__MLB_MLBDAT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG (_MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 (_MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DIOW__PATA_DIOW (_MX53_PAD_PATA_DIOW__PATA_DIOW | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DIOW__GPIO6_17 (_MX53_PAD_PATA_DIOW__GPIO6_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX (_MX53_PAD_PATA_DIOW__UART1_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 (_MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DMACK__PATA_DMACK (_MX53_PAD_PATA_DMACK__PATA_DMACK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DMACK__GPIO6_18 (_MX53_PAD_PATA_DMACK__GPIO6_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX (_MX53_PAD_PATA_DMACK__UART1_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 (_MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DMARQ__PATA_DMARQ (_MX53_PAD_PATA_DMARQ__PATA_DMARQ | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DMARQ__GPIO7_0 (_MX53_PAD_PATA_DMARQ__GPIO7_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX (_MX53_PAD_PATA_DMARQ__UART2_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 (_MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 (_MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN (_MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1 (_MX53_PAD_PATA_BUFFER_EN__GPIO7_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX (_MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 (_MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 (_MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_INTRQ__PATA_INTRQ (_MX53_PAD_PATA_INTRQ__PATA_INTRQ | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_INTRQ__GPIO7_2 (_MX53_PAD_PATA_INTRQ__GPIO7_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_INTRQ__UART2_CTS (_MX53_PAD_PATA_INTRQ__UART2_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN (_MX53_PAD_PATA_INTRQ__CAN1_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 (_MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 (_MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DIOR__PATA_DIOR (_MX53_PAD_PATA_DIOR__PATA_DIOR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DIOR__GPIO7_3 (_MX53_PAD_PATA_DIOR__GPIO7_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DIOR__UART2_RTS (_MX53_PAD_PATA_DIOR__UART2_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_PATA_DIOR__CAN1_RXCAN (_MX53_PAD_PATA_DIOR__CAN1_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 (_MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B (_MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_RESET_B__GPIO7_4 (_MX53_PAD_PATA_RESET_B__GPIO7_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD (_MX53_PAD_PATA_RESET_B__ESDHC3_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_RESET_B__UART1_CTS (_MX53_PAD_PATA_RESET_B__UART1_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN (_MX53_PAD_PATA_RESET_B__CAN2_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 (_MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_IORDY__PATA_IORDY (_MX53_PAD_PATA_IORDY__PATA_IORDY | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_IORDY__GPIO7_5 (_MX53_PAD_PATA_IORDY__GPIO7_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_IORDY__ESDHC3_CLK (_MX53_PAD_PATA_IORDY__ESDHC3_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_IORDY__UART1_RTS (_MX53_PAD_PATA_IORDY__UART1_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_IORDY__CAN2_RXCAN (_MX53_PAD_PATA_IORDY__CAN2_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 (_MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_0__PATA_DA_0 (_MX53_PAD_PATA_DA_0__PATA_DA_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_0__GPIO7_6 (_MX53_PAD_PATA_DA_0__GPIO7_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_0__ESDHC3_RST (_MX53_PAD_PATA_DA_0__ESDHC3_RST | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_0__OWIRE_LINE (_MX53_PAD_PATA_DA_0__OWIRE_LINE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 (_MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_1__PATA_DA_1 (_MX53_PAD_PATA_DA_1__PATA_DA_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_1__GPIO7_7 (_MX53_PAD_PATA_DA_1__GPIO7_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_1__ESDHC4_CMD (_MX53_PAD_PATA_DA_1__ESDHC4_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DA_1__UART3_CTS (_MX53_PAD_PATA_DA_1__UART3_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 (_MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_2__PATA_DA_2 (_MX53_PAD_PATA_DA_2__PATA_DA_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_2__GPIO7_8 (_MX53_PAD_PATA_DA_2__GPIO7_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_2__ESDHC4_CLK (_MX53_PAD_PATA_DA_2__ESDHC4_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DA_2__UART3_RTS (_MX53_PAD_PATA_DA_2__UART3_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 (_MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_CS_0__PATA_CS_0 (_MX53_PAD_PATA_CS_0__PATA_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_CS_0__GPIO7_9 (_MX53_PAD_PATA_CS_0__GPIO7_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX (_MX53_PAD_PATA_CS_0__UART3_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 (_MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_CS_1__PATA_CS_1 (_MX53_PAD_PATA_CS_1__PATA_CS_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_CS_1__GPIO7_10 (_MX53_PAD_PATA_CS_1__GPIO7_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX (_MX53_PAD_PATA_CS_1__UART3_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 (_MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA0__PATA_DATA_0 (_MX53_PAD_PATA_DATA0__PATA_DATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA0__GPIO2_0 (_MX53_PAD_PATA_DATA0__GPIO2_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 (_MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4 (_MX53_PAD_PATA_DATA0__ESDHC3_DAT4 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 (_MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 (_MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 (_MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA1__PATA_DATA_1 (_MX53_PAD_PATA_DATA1__PATA_DATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA1__GPIO2_1 (_MX53_PAD_PATA_DATA1__GPIO2_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 (_MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5 (_MX53_PAD_PATA_DATA1__ESDHC3_DAT5 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 (_MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 (_MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA2__PATA_DATA_2 (_MX53_PAD_PATA_DATA2__PATA_DATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA2__GPIO2_2 (_MX53_PAD_PATA_DATA2__GPIO2_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 (_MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6 (_MX53_PAD_PATA_DATA2__ESDHC3_DAT6 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 (_MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 (_MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA3__PATA_DATA_3 (_MX53_PAD_PATA_DATA3__PATA_DATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA3__GPIO2_3 (_MX53_PAD_PATA_DATA3__GPIO2_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 (_MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7 (_MX53_PAD_PATA_DATA3__ESDHC3_DAT7 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 (_MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 (_MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA4__PATA_DATA_4 (_MX53_PAD_PATA_DATA4__PATA_DATA_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA4__GPIO2_4 (_MX53_PAD_PATA_DATA4__GPIO2_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 (_MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4 (_MX53_PAD_PATA_DATA4__ESDHC4_DAT4 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 (_MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 (_MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA5__PATA_DATA_5 (_MX53_PAD_PATA_DATA5__PATA_DATA_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA5__GPIO2_5 (_MX53_PAD_PATA_DATA5__GPIO2_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 (_MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5 (_MX53_PAD_PATA_DATA5__ESDHC4_DAT5 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 (_MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 (_MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA6__PATA_DATA_6 (_MX53_PAD_PATA_DATA6__PATA_DATA_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA6__GPIO2_6 (_MX53_PAD_PATA_DATA6__GPIO2_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 (_MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6 (_MX53_PAD_PATA_DATA6__ESDHC4_DAT6 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 (_MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 (_MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA7__PATA_DATA_7 (_MX53_PAD_PATA_DATA7__PATA_DATA_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA7__GPIO2_7 (_MX53_PAD_PATA_DATA7__GPIO2_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 (_MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7 (_MX53_PAD_PATA_DATA7__ESDHC4_DAT7 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 (_MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 (_MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA8__PATA_DATA_8 (_MX53_PAD_PATA_DATA8__PATA_DATA_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA8__GPIO2_8 (_MX53_PAD_PATA_DATA8__GPIO2_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4 (_MX53_PAD_PATA_DATA8__ESDHC1_DAT4 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 (_MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0 (_MX53_PAD_PATA_DATA8__ESDHC3_DAT0 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 (_MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 (_MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA9__PATA_DATA_9 (_MX53_PAD_PATA_DATA9__PATA_DATA_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA9__GPIO2_9 (_MX53_PAD_PATA_DATA9__GPIO2_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5 (_MX53_PAD_PATA_DATA9__ESDHC1_DAT5 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 (_MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1 (_MX53_PAD_PATA_DATA9__ESDHC3_DAT1 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 (_MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 (_MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA10__PATA_DATA_10 (_MX53_PAD_PATA_DATA10__PATA_DATA_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA10__GPIO2_10 (_MX53_PAD_PATA_DATA10__GPIO2_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6 (_MX53_PAD_PATA_DATA10__ESDHC1_DAT6 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 (_MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2 (_MX53_PAD_PATA_DATA10__ESDHC3_DAT2 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 (_MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 (_MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA11__PATA_DATA_11 (_MX53_PAD_PATA_DATA11__PATA_DATA_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA11__GPIO2_11 (_MX53_PAD_PATA_DATA11__GPIO2_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7 (_MX53_PAD_PATA_DATA11__ESDHC1_DAT7 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 (_MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3 (_MX53_PAD_PATA_DATA11__ESDHC3_DAT3 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 (_MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 (_MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA12__PATA_DATA_12 (_MX53_PAD_PATA_DATA12__PATA_DATA_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA12__GPIO2_12 (_MX53_PAD_PATA_DATA12__GPIO2_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4 (_MX53_PAD_PATA_DATA12__ESDHC2_DAT4 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 (_MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0 (_MX53_PAD_PATA_DATA12__ESDHC4_DAT0 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 (_MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 (_MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA13__PATA_DATA_13 (_MX53_PAD_PATA_DATA13__PATA_DATA_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA13__GPIO2_13 (_MX53_PAD_PATA_DATA13__GPIO2_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5 (_MX53_PAD_PATA_DATA13__ESDHC2_DAT5 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 (_MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1 (_MX53_PAD_PATA_DATA13__ESDHC4_DAT1 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 (_MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 (_MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA14__PATA_DATA_14 (_MX53_PAD_PATA_DATA14__PATA_DATA_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA14__GPIO2_14 (_MX53_PAD_PATA_DATA14__GPIO2_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6 (_MX53_PAD_PATA_DATA14__ESDHC2_DAT6 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 (_MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2 (_MX53_PAD_PATA_DATA14__ESDHC4_DAT2 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 (_MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 (_MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA15__PATA_DATA_15 (_MX53_PAD_PATA_DATA15__PATA_DATA_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA15__GPIO2_15 (_MX53_PAD_PATA_DATA15__GPIO2_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7 (_MX53_PAD_PATA_DATA15__ESDHC2_DAT7 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 (_MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3 (_MX53_PAD_PATA_DATA15__ESDHC4_DAT3 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 (_MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 (_MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0 (_MX53_PAD_SD1_DATA0__ESDHC1_DAT0 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_SD1_DATA0__GPIO1_16 (_MX53_PAD_SD1_DATA0__GPIO1_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA0__GPT_CAPIN1 (_MX53_PAD_SD1_DATA0__GPT_CAPIN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA0__CSPI_MISO (_MX53_PAD_SD1_DATA0__CSPI_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP (_MX53_PAD_SD1_DATA0__CCM_PLL3_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1 (_MX53_PAD_SD1_DATA1__ESDHC1_DAT1 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_SD1_DATA1__GPIO1_17 (_MX53_PAD_SD1_DATA1__GPIO1_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA1__GPT_CAPIN2 (_MX53_PAD_SD1_DATA1__GPT_CAPIN2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA1__CSPI_SS0 (_MX53_PAD_SD1_DATA1__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP (_MX53_PAD_SD1_DATA1__CCM_PLL4_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_CMD__ESDHC1_CMD (_MX53_PAD_SD1_CMD__ESDHC1_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_SD1_CMD__GPIO1_18 (_MX53_PAD_SD1_CMD__GPIO1_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_CMD__GPT_CMPOUT1 (_MX53_PAD_SD1_CMD__GPT_CMPOUT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_CMD__CSPI_MOSI (_MX53_PAD_SD1_CMD__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP (_MX53_PAD_SD1_CMD__CCM_PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2 (_MX53_PAD_SD1_DATA2__ESDHC1_DAT2 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_SD1_DATA2__GPIO1_19 (_MX53_PAD_SD1_DATA2__GPIO1_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2 (_MX53_PAD_SD1_DATA2__GPT_CMPOUT2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA2__PWM2_PWMO (_MX53_PAD_SD1_DATA2__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B (_MX53_PAD_SD1_DATA2__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA2__CSPI_SS1 (_MX53_PAD_SD1_DATA2__CSPI_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB (_MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP (_MX53_PAD_SD1_DATA2__CCM_PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_CLK__ESDHC1_CLK (_MX53_PAD_SD1_CLK__ESDHC1_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_SD1_CLK__GPIO1_20 (_MX53_PAD_SD1_CLK__GPIO1_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT (_MX53_PAD_SD1_CLK__OSC32k_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_CLK__GPT_CLKIN (_MX53_PAD_SD1_CLK__GPT_CLKIN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_CLK__CSPI_SCLK (_MX53_PAD_SD1_CLK__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 (_MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3 (_MX53_PAD_SD1_DATA3__ESDHC1_DAT3 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_SD1_DATA3__GPIO1_21 (_MX53_PAD_SD1_DATA3__GPIO1_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3 (_MX53_PAD_SD1_DATA3__GPT_CMPOUT3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA3__PWM1_PWMO (_MX53_PAD_SD1_DATA3__PWM1_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B (_MX53_PAD_SD1_DATA3__WDOG2_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA3__CSPI_SS2 (_MX53_PAD_SD1_DATA3__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB (_MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 (_MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CLK__ESDHC2_CLK (_MX53_PAD_SD2_CLK__ESDHC2_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_SD2_CLK__GPIO1_10 (_MX53_PAD_SD2_CLK__GPIO1_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CLK__KPP_COL_5 (_MX53_PAD_SD2_CLK__KPP_COL_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS (_MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CLK__CSPI_SCLK (_MX53_PAD_SD2_CLK__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CLK__SCC_RANDOM_V (_MX53_PAD_SD2_CLK__SCC_RANDOM_V | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CMD__ESDHC2_CMD (_MX53_PAD_SD2_CMD__ESDHC2_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_SD2_CMD__GPIO1_11 (_MX53_PAD_SD2_CMD__GPIO1_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CMD__KPP_ROW_5 (_MX53_PAD_SD2_CMD__KPP_ROW_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC (_MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CMD__CSPI_MOSI (_MX53_PAD_SD2_CMD__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CMD__SCC_RANDOM (_MX53_PAD_SD2_CMD__SCC_RANDOM | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3 (_MX53_PAD_SD2_DATA3__ESDHC2_DAT3 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_SD2_DATA3__GPIO1_12 (_MX53_PAD_SD2_DATA3__GPIO1_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA3__KPP_COL_6 (_MX53_PAD_SD2_DATA3__KPP_COL_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC (_MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA3__CSPI_SS2 (_MX53_PAD_SD2_DATA3__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA3__SJC_DONE (_MX53_PAD_SD2_DATA3__SJC_DONE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2 (_MX53_PAD_SD2_DATA2__ESDHC2_DAT2 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_SD2_DATA2__GPIO1_13 (_MX53_PAD_SD2_DATA2__GPIO1_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA2__KPP_ROW_6 (_MX53_PAD_SD2_DATA2__KPP_ROW_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD (_MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA2__CSPI_SS1 (_MX53_PAD_SD2_DATA2__CSPI_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA2__SJC_FAIL (_MX53_PAD_SD2_DATA2__SJC_FAIL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1 (_MX53_PAD_SD2_DATA1__ESDHC2_DAT1 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_SD2_DATA1__GPIO1_14 (_MX53_PAD_SD2_DATA1__GPIO1_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA1__KPP_COL_7 (_MX53_PAD_SD2_DATA1__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS (_MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA1__CSPI_SS0 (_MX53_PAD_SD2_DATA1__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO (_MX53_PAD_SD2_DATA1__RTIC_SEC_VIO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0 (_MX53_PAD_SD2_DATA0__ESDHC2_DAT0 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) +#define MX53_PAD_SD2_DATA0__GPIO1_15 (_MX53_PAD_SD2_DATA0__GPIO1_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA0__KPP_ROW_7 (_MX53_PAD_SD2_DATA0__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD (_MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA0__CSPI_MISO (_MX53_PAD_SD2_DATA0__CSPI_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT (_MX53_PAD_SD2_DATA0__RTIC_DONE_INT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_0__CCM_CLKO (_MX53_PAD_GPIO_0__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_0__GPIO1_0 (_MX53_PAD_GPIO_0__GPIO1_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_0__KPP_COL_5 (_MX53_PAD_GPIO_0__KPP_COL_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK (_MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_0__EPIT1_EPITO (_MX53_PAD_GPIO_0__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB (_MX53_PAD_GPIO_0__SRTC_ALARM_DEB | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR (_MX53_PAD_GPIO_0__USBOH3_USBH1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_0__CSU_TD (_MX53_PAD_GPIO_0__CSU_TD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_1__ESAI1_SCKR (_MX53_PAD_GPIO_1__ESAI1_SCKR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_1__GPIO1_1 (_MX53_PAD_GPIO_1__GPIO1_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_1__KPP_ROW_5 (_MX53_PAD_GPIO_1__KPP_ROW_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK (_MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_1__PWM2_PWMO (_MX53_PAD_GPIO_1__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_1__WDOG2_WDOG_B (_MX53_PAD_GPIO_1__WDOG2_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_1__ESDHC1_CD (_MX53_PAD_GPIO_1__ESDHC1_CD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_1__SRC_TESTER_ACK (_MX53_PAD_GPIO_1__SRC_TESTER_ACK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_9__ESAI1_FSR (_MX53_PAD_GPIO_9__ESAI1_FSR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_9__GPIO1_9 (_MX53_PAD_GPIO_9__GPIO1_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_9__KPP_COL_6 (_MX53_PAD_GPIO_9__KPP_COL_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_9__CCM_REF_EN_B (_MX53_PAD_GPIO_9__CCM_REF_EN_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_9__PWM1_PWMO (_MX53_PAD_GPIO_9__PWM1_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_9__WDOG1_WDOG_B (_MX53_PAD_GPIO_9__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_9__ESDHC1_WP (_MX53_PAD_GPIO_9__ESDHC1_WP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_9__SCC_FAIL_STATE (_MX53_PAD_GPIO_9__SCC_FAIL_STATE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_3__ESAI1_HCKR (_MX53_PAD_GPIO_3__ESAI1_HCKR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_3__GPIO1_3 (_MX53_PAD_GPIO_3__GPIO1_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_3__I2C3_SCL (_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN (_MX53_PAD_GPIO_3__DPLLIP1_TOG_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_3__CCM_CLKO2 (_MX53_PAD_GPIO_3__CCM_CLKO2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 (_MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC (_MX53_PAD_GPIO_3__USBOH3_USBH1_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_3__MLB_MLBCLK (_MX53_PAD_GPIO_3__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_6__ESAI1_SCKT (_MX53_PAD_GPIO_6__ESAI1_SCKT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_6__GPIO1_6 (_MX53_PAD_GPIO_6__GPIO1_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_6__I2C3_SDA (_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0 (_MX53_PAD_GPIO_6__CCM_CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB (_MX53_PAD_GPIO_6__CSU_CSU_INT_DEB | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 (_MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_6__ESDHC2_LCTL (_MX53_PAD_GPIO_6__ESDHC2_LCTL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_6__MLB_MLBSIG (_MX53_PAD_GPIO_6__MLB_MLBSIG | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_2__ESAI1_FST (_MX53_PAD_GPIO_2__ESAI1_FST | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_2__GPIO1_2 (_MX53_PAD_GPIO_2__GPIO1_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_2__KPP_ROW_6 (_MX53_PAD_GPIO_2__KPP_ROW_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1 (_MX53_PAD_GPIO_2__CCM_CCM_OUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 (_MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 (_MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_2__ESDHC2_WP (_MX53_PAD_GPIO_2__ESDHC2_WP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_2__MLB_MLBDAT (_MX53_PAD_GPIO_2__MLB_MLBDAT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_4__ESAI1_HCKT (_MX53_PAD_GPIO_4__ESAI1_HCKT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_4__GPIO1_4 (_MX53_PAD_GPIO_4__GPIO1_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_4__KPP_COL_7 (_MX53_PAD_GPIO_4__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2 (_MX53_PAD_GPIO_4__CCM_CCM_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 (_MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 (_MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_4__ESDHC2_CD (_MX53_PAD_GPIO_4__ESDHC2_CD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_4__SCC_SEC_STATE (_MX53_PAD_GPIO_4__SCC_SEC_STATE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3 (_MX53_PAD_GPIO_5__ESAI1_TX2_RX3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_5__GPIO1_5 (_MX53_PAD_GPIO_5__GPIO1_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_5__KPP_ROW_7 (_MX53_PAD_GPIO_5__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_5__CCM_CLKO (_MX53_PAD_GPIO_5__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 (_MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 (_MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_5__I2C3_SCL (_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_5__CCM_PLL1_BYP (_MX53_PAD_GPIO_5__CCM_PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1 (_MX53_PAD_GPIO_7__ESAI1_TX4_RX1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_7__GPIO1_7 (_MX53_PAD_GPIO_7__GPIO1_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_7__EPIT1_EPITO (_MX53_PAD_GPIO_7__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_7__CAN1_TXCAN (_MX53_PAD_GPIO_7__CAN1_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_7__UART2_TXD_MUX (_MX53_PAD_GPIO_7__UART2_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_7__FIRI_RXD (_MX53_PAD_GPIO_7__FIRI_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_7__SPDIF_PLOCK (_MX53_PAD_GPIO_7__SPDIF_PLOCK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_7__CCM_PLL2_BYP (_MX53_PAD_GPIO_7__CCM_PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0 (_MX53_PAD_GPIO_8__ESAI1_TX5_RX0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_8__GPIO1_8 (_MX53_PAD_GPIO_8__GPIO1_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_8__EPIT2_EPITO (_MX53_PAD_GPIO_8__EPIT2_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_8__CAN1_RXCAN (_MX53_PAD_GPIO_8__CAN1_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_8__UART2_RXD_MUX (_MX53_PAD_GPIO_8__UART2_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_8__FIRI_TXD (_MX53_PAD_GPIO_8__FIRI_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_8__SPDIF_SRCLK (_MX53_PAD_GPIO_8__SPDIF_SRCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_8__CCM_PLL3_BYP (_MX53_PAD_GPIO_8__CCM_PLL3_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2 (_MX53_PAD_GPIO_16__ESAI1_TX3_RX2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_16__GPIO7_11 (_MX53_PAD_GPIO_16__GPIO7_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT (_MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 (_MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_16__SPDIF_IN1 (_MX53_PAD_GPIO_16__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_16__I2C3_SDA (_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_16__SJC_DE_B (_MX53_PAD_GPIO_16__SJC_DE_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_17__ESAI1_TX0 (_MX53_PAD_GPIO_17__ESAI1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_17__GPIO7_12 (_MX53_PAD_GPIO_17__GPIO7_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 (_MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_17__GPC_PMIC_RDY (_MX53_PAD_GPIO_17__GPC_PMIC_RDY | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG (_MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_17__SPDIF_OUT1 (_MX53_PAD_GPIO_17__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_17__IPU_SNOOP2 (_MX53_PAD_GPIO_17__IPU_SNOOP2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_17__SJC_JTAG_ACT (_MX53_PAD_GPIO_17__SJC_JTAG_ACT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_18__ESAI1_TX1 (_MX53_PAD_GPIO_18__ESAI1_TX1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_18__GPIO7_13 (_MX53_PAD_GPIO_18__GPIO7_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 (_MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_18__OWIRE_LINE (_MX53_PAD_GPIO_18__OWIRE_LINE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG (_MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK (_MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_18__ESDHC1_LCTL (_MX53_PAD_GPIO_18__ESDHC1_LCTL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST (_MX53_PAD_GPIO_18__SRC_SYSTEM_RST | MUX_PAD_CTRL(NO_PAD_CTRL)) #endif /* __MACH_IOMUX_MX53_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h index 15d59510f59..bf28df0d58b 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h @@ -46,12 +46,12 @@ * - setups the iomux according to the configuration * - if the pin is configured as a GPIO, we claim it through kernel gpiolib */ -int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label); +int mxc_iomux_alloc_pin(unsigned int pin_mode, const char *label); /* * setups mutliple pins * convenient way to call the above function with tables */ -int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count, +int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count, const char *label); /* @@ -60,12 +60,12 @@ int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count, * - frees the GPIO if the pin was configured as GPIO * - DOES NOT reconfigure the IOMUX in its reset state */ -void mxc_iomux_release_pin(const unsigned int pin_mode); +void mxc_iomux_release_pin(unsigned int pin_mode); /* * releases multiple pins * convenvient way to call the above function with tables */ -void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count); +void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count); #define MUX_SIDE_AP (0) #define MUX_SIDE_SP (1) diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h index 884f5753f27..c07d30210c5 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v1.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h @@ -100,4 +100,6 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, const char *label); extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count); +extern int __init imx_iomuxv1_init(void __iomem *base, int numports); + #endif /* __MACH_IOMUX_V1_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index ba65c9231a7..a3d930d3e65 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -23,17 +23,17 @@ #define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS /* these are ordered by size to support multi-SoC kernels */ -#if defined CONFIG_ARCH_MX53 +#if defined CONFIG_SOC_IMX53 #define MXC_GPIO_IRQS (32 * 7) #elif defined CONFIG_ARCH_MX2 #define MXC_GPIO_IRQS (32 * 6) -#elif defined CONFIG_ARCH_MX50 +#elif defined CONFIG_SOC_IMX50 #define MXC_GPIO_IRQS (32 * 6) #elif defined CONFIG_ARCH_MX1 #define MXC_GPIO_IRQS (32 * 4) #elif defined CONFIG_ARCH_MX25 #define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_ARCH_MX51 +#elif defined CONFIG_SOC_IMX51 #define MXC_GPIO_IRQS (32 * 4) #elif defined CONFIG_ARCH_MXC91231 #define MXC_GPIO_IRQS (32 * 4) diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h index 75d96214b83..97b19e7800b 100644 --- a/arch/arm/plat-mxc/include/mach/mx1.h +++ b/arch/arm/plat-mxc/include/mach/mx1.h @@ -54,13 +54,13 @@ #define MX1_AIPI2_BASE_ADDR (0x10000 + MX1_IO_BASE_ADDR) #define MX1_SIM_BASE_ADDR (0x11000 + MX1_IO_BASE_ADDR) #define MX1_USBD_BASE_ADDR (0x12000 + MX1_IO_BASE_ADDR) -#define MX1_SPI1_BASE_ADDR (0x13000 + MX1_IO_BASE_ADDR) +#define MX1_CSPI1_BASE_ADDR (0x13000 + MX1_IO_BASE_ADDR) #define MX1_MMC_BASE_ADDR (0x14000 + MX1_IO_BASE_ADDR) #define MX1_ASP_BASE_ADDR (0x15000 + MX1_IO_BASE_ADDR) #define MX1_BTA_BASE_ADDR (0x16000 + MX1_IO_BASE_ADDR) #define MX1_I2C_BASE_ADDR (0x17000 + MX1_IO_BASE_ADDR) #define MX1_SSI_BASE_ADDR (0x18000 + MX1_IO_BASE_ADDR) -#define MX1_SPI2_BASE_ADDR (0x19000 + MX1_IO_BASE_ADDR) +#define MX1_CSPI2_BASE_ADDR (0x19000 + MX1_IO_BASE_ADDR) #define MX1_MSHC_BASE_ADDR (0x1A000 + MX1_IO_BASE_ADDR) #define MX1_CCM_BASE_ADDR (0x1B000 + MX1_IO_BASE_ADDR) #define MX1_SCM_BASE_ADDR (0x1B804 + MX1_IO_BASE_ADDR) @@ -89,7 +89,7 @@ #define MX1_GPIO_INT_PORTA 11 #define MX1_GPIO_INT_PORTB 12 #define MX1_GPIO_INT_PORTC 13 -#define MX1_LCDC_INT 14 +#define MX1_INT_LCDC 14 #define MX1_SIM_INT 15 #define MX1_SIM_DATA_INT 16 #define MX1_RTC_INT 17 @@ -112,7 +112,8 @@ #define MX1_PWM_INT 34 #define MX1_SDHC_INT 35 #define MX1_INT_I2C 39 -#define MX1_CSPI_INT 41 +#define MX1_INT_CSPI2 40 +#define MX1_INT_CSPI1 41 #define MX1_SSI_TX_INT 42 #define MX1_SSI_TX_ERR_INT 43 #define MX1_SSI_RX_INT 44 diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h index d7a8e52181e..ace17864575 100644 --- a/arch/arm/plat-mxc/include/mach/mx53.h +++ b/arch/arm/plat-mxc/include/mach/mx53.h @@ -79,7 +79,7 @@ #define MX53_GPIO3_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x0008C000) #define MX53_GPIO4_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00090000) #define MX53_KPP_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00094000) -#define MX53_WDOG_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00098000) +#define MX53_WDOG1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00098000) #define MX53_WDOG2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x0009C000) #define MX53_GPT1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A0000) #define MX53_SRTC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A4000) diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h index 04c7a26b1f2..7e072637eef 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/plat-mxc/include/mach/mxc.h @@ -103,7 +103,7 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx27() (0) #endif -#ifdef CONFIG_ARCH_MX31 +#ifdef CONFIG_SOC_IMX31 # ifdef mxc_cpu_type # undef mxc_cpu_type # define mxc_cpu_type __mxc_cpu_type @@ -115,7 +115,7 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx31() (0) #endif -#ifdef CONFIG_ARCH_MX35 +#ifdef CONFIG_SOC_IMX35 # ifdef mxc_cpu_type # undef mxc_cpu_type # define mxc_cpu_type __mxc_cpu_type @@ -127,7 +127,7 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx35() (0) #endif -#ifdef CONFIG_ARCH_MX50 +#ifdef CONFIG_SOC_IMX50 # ifdef mxc_cpu_type # undef mxc_cpu_type # define mxc_cpu_type __mxc_cpu_type @@ -139,7 +139,7 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx50() (0) #endif -#ifdef CONFIG_ARCH_MX51 +#ifdef CONFIG_SOC_IMX51 # ifdef mxc_cpu_type # undef mxc_cpu_type # define mxc_cpu_type __mxc_cpu_type @@ -151,7 +151,7 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx51() (0) #endif -#ifdef CONFIG_ARCH_MX53 +#ifdef CONFIG_SOC_IMX53 # ifdef mxc_cpu_type # undef mxc_cpu_type # define mxc_cpu_type __mxc_cpu_type diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h index a523a407929..2c159dc2398 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h +++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h @@ -44,11 +44,14 @@ struct mxc_usbh_platform_data { int (*exit)(struct platform_device *pdev); unsigned int portsc; - unsigned int flags; struct otg_transceiver *otg; }; -int mxc_initialize_usb_hw(int port, unsigned int flags); +int mx51_initialize_usb_hw(int port, unsigned int flags); +int mx25_initialize_usb_hw(int port, unsigned int flags); +int mx31_initialize_usb_hw(int port, unsigned int flags); +int mx35_initialize_usb_hw(int port, unsigned int flags); +int mx27_initialize_usb_hw(int port, unsigned int flags); #endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */ diff --git a/arch/arm/plat-mxc/include/mach/ulpi.h b/arch/arm/plat-mxc/include/mach/ulpi.h index 96b6ab4c40c..f9161c96d7b 100644 --- a/arch/arm/plat-mxc/include/mach/ulpi.h +++ b/arch/arm/plat-mxc/include/mach/ulpi.h @@ -1,6 +1,15 @@ #ifndef __MACH_ULPI_H #define __MACH_ULPI_H +#ifdef CONFIG_USB_ULPI +struct otg_transceiver *imx_otg_ulpi_create(unsigned int flags); +#else +static inline struct otg_transceiver *imx_otg_ulpi_create(unsigned int flags) +{ + return NULL; +} +#endif + extern struct otg_io_access_ops mxc_ulpi_access_ops; #endif /* __MACH_ULPI_H */ diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index ff469c4f1d7..4864b0afd44 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -62,6 +62,7 @@ static inline void flush(void) #define MX2X_UART1_BASE_ADDR 0x1000a000 #define MX3X_UART1_BASE_ADDR 0x43F90000 #define MX3X_UART2_BASE_ADDR 0x43F94000 +#define MX3X_UART5_BASE_ADDR 0x43FB4000 #define MX51_UART1_BASE_ADDR 0x73fbc000 #define MX50_UART1_BASE_ADDR 0x53fbc000 #define MX53_UART1_BASE_ADDR 0x53fbc000 @@ -83,6 +84,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_MX21ADS: case MACH_TYPE_PCA100: case MACH_TYPE_MXT_TD60: + case MACH_TYPE_IMX27IPCAM: uart_base = MX2X_UART1_BASE_ADDR; break; case MACH_TYPE_MX31LITE: @@ -101,6 +103,9 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_MAGX_ZN5: uart_base = MX3X_UART2_BASE_ADDR; break; + case MACH_TYPE_BUG: + uart_base = MX3X_UART5_BASE_ADDR; + break; case MACH_TYPE_MX51_BABBAGE: case MACH_TYPE_EUKREA_CPUIMX51SD: case MACH_TYPE_MX51_3DS: @@ -110,6 +115,8 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) uart_base = MX50_UART1_BASE_ADDR; break; case MACH_TYPE_MX53_EVK: + case MACH_TYPE_MX53_LOCO: + case MACH_TYPE_MX53_SMD: uart_base = MX53_UART1_BASE_ADDR; break; default: diff --git a/arch/arm/plat-mxc/iomux-v1.c b/arch/arm/plat-mxc/iomux-v1.c index 960a02cbcba..3238c10d4e0 100644 --- a/arch/arm/plat-mxc/iomux-v1.c +++ b/arch/arm/plat-mxc/iomux-v1.c @@ -211,28 +211,10 @@ void mxc_gpio_release_multiple_pins(const int *pin_list, int count) } EXPORT_SYMBOL(mxc_gpio_release_multiple_pins); -static int imx_iomuxv1_init(void) +int __init imx_iomuxv1_init(void __iomem *base, int numports) { -#ifdef CONFIG_ARCH_MX1 - if (cpu_is_mx1()) { - imx_iomuxv1_baseaddr = MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR); - imx_iomuxv1_numports = MX1_NUM_GPIO_PORT; - } else -#endif -#ifdef CONFIG_MACH_MX21 - if (cpu_is_mx21()) { - imx_iomuxv1_baseaddr = MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR); - imx_iomuxv1_numports = MX21_NUM_GPIO_PORT; - } else -#endif -#ifdef CONFIG_MACH_MX27 - if (cpu_is_mx27()) { - imx_iomuxv1_baseaddr = MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR); - imx_iomuxv1_numports = MX27_NUM_GPIO_PORT; - } else -#endif - return -ENODEV; + imx_iomuxv1_baseaddr = base; + imx_iomuxv1_numports = numports; return 0; } -pure_initcall(imx_iomuxv1_init); diff --git a/arch/arm/plat-mxc/ulpi.c b/arch/arm/plat-mxc/ulpi.c index 582c6dfaba4..477e45bea1b 100644 --- a/arch/arm/plat-mxc/ulpi.c +++ b/arch/arm/plat-mxc/ulpi.c @@ -22,6 +22,7 @@ #include <linux/io.h> #include <linux/delay.h> #include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> #include <mach/ulpi.h> @@ -111,3 +112,7 @@ struct otg_io_access_ops mxc_ulpi_access_ops = { }; EXPORT_SYMBOL_GPL(mxc_ulpi_access_ops); +struct otg_transceiver *imx_otg_ulpi_create(unsigned int flags) +{ + return otg_ulpi_create(&mxc_ulpi_access_ops, flags); +} diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c index 1e88ecb846d..70620426ee5 100644 --- a/arch/arm/plat-nomadik/gpio.c +++ b/arch/arm/plat-nomadik/gpio.c @@ -30,23 +30,39 @@ /* * The GPIO module in the Nomadik family of Systems-on-Chip is an * AMBA device, managing 32 pins and alternate functions. The logic block - * is currently only used in the Nomadik. + * is currently used in the Nomadik and ux500. * * Symbols in this file are called "nmk_gpio" for "nomadik gpio" */ -#define NMK_GPIO_PER_CHIP 32 +#define NMK_GPIO_PER_CHIP 32 + struct nmk_gpio_chip { struct gpio_chip chip; void __iomem *addr; struct clk *clk; + unsigned int bank; unsigned int parent_irq; + int secondary_parent_irq; + u32 (*get_secondary_status)(unsigned int bank); + void (*set_ioforce)(bool enable); spinlock_t lock; /* Keep track of configured edges */ u32 edge_rising; u32 edge_falling; + u32 real_wake; + u32 rwimsc; + u32 fwimsc; + u32 slpm; }; +static struct nmk_gpio_chip * +nmk_gpio_chips[DIV_ROUND_UP(ARCH_NR_GPIOS, NMK_GPIO_PER_CHIP)]; + +static DEFINE_SPINLOCK(nmk_gpio_slpm_lock); + +#define NUM_BANKS ARRAY_SIZE(nmk_gpio_chips) + static void __nmk_gpio_set_mode(struct nmk_gpio_chip *nmk_chip, unsigned offset, int gpio_mode) { @@ -118,8 +134,35 @@ static void __nmk_gpio_make_output(struct nmk_gpio_chip *nmk_chip, __nmk_gpio_set_output(nmk_chip, offset, val); } +static void __nmk_gpio_set_mode_safe(struct nmk_gpio_chip *nmk_chip, + unsigned offset, int gpio_mode, + bool glitch) +{ + u32 rwimsc = readl(nmk_chip->addr + NMK_GPIO_RWIMSC); + u32 fwimsc = readl(nmk_chip->addr + NMK_GPIO_FWIMSC); + + if (glitch && nmk_chip->set_ioforce) { + u32 bit = BIT(offset); + + /* Prevent spurious wakeups */ + writel(rwimsc & ~bit, nmk_chip->addr + NMK_GPIO_RWIMSC); + writel(fwimsc & ~bit, nmk_chip->addr + NMK_GPIO_FWIMSC); + + nmk_chip->set_ioforce(true); + } + + __nmk_gpio_set_mode(nmk_chip, offset, gpio_mode); + + if (glitch && nmk_chip->set_ioforce) { + nmk_chip->set_ioforce(false); + + writel(rwimsc, nmk_chip->addr + NMK_GPIO_RWIMSC); + writel(fwimsc, nmk_chip->addr + NMK_GPIO_FWIMSC); + } +} + static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset, - pin_cfg_t cfg, bool sleep) + pin_cfg_t cfg, bool sleep, unsigned int *slpmregs) { static const char *afnames[] = { [NMK_GPIO_ALT_GPIO] = "GPIO", @@ -144,6 +187,7 @@ static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset, int slpm = PIN_SLPM(cfg); int output = PIN_DIR(cfg); int val = PIN_VAL(cfg); + bool glitch = af == NMK_GPIO_ALT_C; dev_dbg(nmk_chip->chip.dev, "pin %d [%#lx]: af %s, pull %s, slpm %s (%s%s)\n", pin, cfg, afnames[af], pullnames[pull], slpmnames[slpm], @@ -155,6 +199,8 @@ static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset, int slpm_output = PIN_SLPM_DIR(cfg); int slpm_val = PIN_SLPM_VAL(cfg); + af = NMK_GPIO_ALT_GPIO; + /* * The SLPM_* values are normal values + 1 to allow zero to * mean "same as normal". @@ -180,8 +226,116 @@ static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset, __nmk_gpio_set_pull(nmk_chip, offset, pull); } - __nmk_gpio_set_slpm(nmk_chip, offset, slpm); - __nmk_gpio_set_mode(nmk_chip, offset, af); + /* + * If we've backed up the SLPM registers (glitch workaround), modify + * the backups since they will be restored. + */ + if (slpmregs) { + if (slpm == NMK_GPIO_SLPM_NOCHANGE) + slpmregs[nmk_chip->bank] |= BIT(offset); + else + slpmregs[nmk_chip->bank] &= ~BIT(offset); + } else + __nmk_gpio_set_slpm(nmk_chip, offset, slpm); + + __nmk_gpio_set_mode_safe(nmk_chip, offset, af, glitch); +} + +/* + * Safe sequence used to switch IOs between GPIO and Alternate-C mode: + * - Save SLPM registers + * - Set SLPM=0 for the IOs you want to switch and others to 1 + * - Configure the GPIO registers for the IOs that are being switched + * - Set IOFORCE=1 + * - Modify the AFLSA/B registers for the IOs that are being switched + * - Set IOFORCE=0 + * - Restore SLPM registers + * - Any spurious wake up event during switch sequence to be ignored and + * cleared + */ +static void nmk_gpio_glitch_slpm_init(unsigned int *slpm) +{ + int i; + + for (i = 0; i < NUM_BANKS; i++) { + struct nmk_gpio_chip *chip = nmk_gpio_chips[i]; + unsigned int temp = slpm[i]; + + if (!chip) + break; + + slpm[i] = readl(chip->addr + NMK_GPIO_SLPC); + writel(temp, chip->addr + NMK_GPIO_SLPC); + } +} + +static void nmk_gpio_glitch_slpm_restore(unsigned int *slpm) +{ + int i; + + for (i = 0; i < NUM_BANKS; i++) { + struct nmk_gpio_chip *chip = nmk_gpio_chips[i]; + + if (!chip) + break; + + writel(slpm[i], chip->addr + NMK_GPIO_SLPC); + } +} + +static int __nmk_config_pins(pin_cfg_t *cfgs, int num, bool sleep) +{ + static unsigned int slpm[NUM_BANKS]; + unsigned long flags; + bool glitch = false; + int ret = 0; + int i; + + for (i = 0; i < num; i++) { + if (PIN_ALT(cfgs[i]) == NMK_GPIO_ALT_C) { + glitch = true; + break; + } + } + + spin_lock_irqsave(&nmk_gpio_slpm_lock, flags); + + if (glitch) { + memset(slpm, 0xff, sizeof(slpm)); + + for (i = 0; i < num; i++) { + int pin = PIN_NUM(cfgs[i]); + int offset = pin % NMK_GPIO_PER_CHIP; + + if (PIN_ALT(cfgs[i]) == NMK_GPIO_ALT_C) + slpm[pin / NMK_GPIO_PER_CHIP] &= ~BIT(offset); + } + + nmk_gpio_glitch_slpm_init(slpm); + } + + for (i = 0; i < num; i++) { + struct nmk_gpio_chip *nmk_chip; + int pin = PIN_NUM(cfgs[i]); + + nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(pin)); + if (!nmk_chip) { + ret = -EINVAL; + break; + } + + spin_lock(&nmk_chip->lock); + __nmk_config_pin(nmk_chip, pin - nmk_chip->chip.base, + cfgs[i], sleep, glitch ? slpm : NULL); + spin_unlock(&nmk_chip->lock); + } + + if (glitch) + nmk_gpio_glitch_slpm_restore(slpm); + + spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags); + + return ret; } /** @@ -200,19 +354,7 @@ static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset, */ int nmk_config_pin(pin_cfg_t cfg, bool sleep) { - struct nmk_gpio_chip *nmk_chip; - int gpio = PIN_NUM(cfg); - unsigned long flags; - - nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); - if (!nmk_chip) - return -EINVAL; - - spin_lock_irqsave(&nmk_chip->lock, flags); - __nmk_config_pin(nmk_chip, gpio - nmk_chip->chip.base, cfg, sleep); - spin_unlock_irqrestore(&nmk_chip->lock, flags); - - return 0; + return __nmk_config_pins(&cfg, 1, sleep); } EXPORT_SYMBOL(nmk_config_pin); @@ -226,31 +368,13 @@ EXPORT_SYMBOL(nmk_config_pin); */ int nmk_config_pins(pin_cfg_t *cfgs, int num) { - int ret = 0; - int i; - - for (i = 0; i < num; i++) { - ret = nmk_config_pin(cfgs[i], false); - if (ret) - break; - } - - return ret; + return __nmk_config_pins(cfgs, num, false); } EXPORT_SYMBOL(nmk_config_pins); int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num) { - int ret = 0; - int i; - - for (i = 0; i < num; i++) { - ret = nmk_config_pin(cfgs[i], true); - if (ret) - break; - } - - return ret; + return __nmk_config_pins(cfgs, num, true); } EXPORT_SYMBOL(nmk_config_pins_sleep); @@ -277,9 +401,13 @@ int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode) if (!nmk_chip) return -EINVAL; - spin_lock_irqsave(&nmk_chip->lock, flags); + spin_lock_irqsave(&nmk_gpio_slpm_lock, flags); + spin_lock(&nmk_chip->lock); + __nmk_gpio_set_slpm(nmk_chip, gpio - nmk_chip->chip.base, mode); - spin_unlock_irqrestore(&nmk_chip->lock, flags); + + spin_unlock(&nmk_chip->lock); + spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags); return 0; } @@ -314,6 +442,15 @@ int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull) } /* Mode functions */ +/** + * nmk_gpio_set_mode() - set the mux mode of a gpio pin + * @gpio: pin number + * @gpio_mode: one of NMK_GPIO_ALT_GPIO, NMK_GPIO_ALT_A, + * NMK_GPIO_ALT_B, and NMK_GPIO_ALT_C + * + * Sets the mode of the specified pin to one of the alternate functions or + * plain GPIO. + */ int nmk_gpio_set_mode(int gpio, int gpio_mode) { struct nmk_gpio_chip *nmk_chip; @@ -401,8 +538,20 @@ static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip, } } -static int nmk_gpio_irq_modify(struct irq_data *d, enum nmk_gpio_irq_type which, - bool enable) +static void __nmk_gpio_set_wake(struct nmk_gpio_chip *nmk_chip, + int gpio, bool on) +{ +#ifdef CONFIG_ARCH_U8500 + if (cpu_is_u8500v2()) { + __nmk_gpio_set_slpm(nmk_chip, gpio - nmk_chip->chip.base, + on ? NMK_GPIO_SLPM_WAKEUP_ENABLE + : NMK_GPIO_SLPM_WAKEUP_DISABLE); + } +#endif + __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on); +} + +static int nmk_gpio_irq_maskunmask(struct irq_data *d, bool enable) { int gpio; struct nmk_gpio_chip *nmk_chip; @@ -415,44 +564,58 @@ static int nmk_gpio_irq_modify(struct irq_data *d, enum nmk_gpio_irq_type which, if (!nmk_chip) return -EINVAL; - spin_lock_irqsave(&nmk_chip->lock, flags); - __nmk_gpio_irq_modify(nmk_chip, gpio, which, enable); - spin_unlock_irqrestore(&nmk_chip->lock, flags); + spin_lock_irqsave(&nmk_gpio_slpm_lock, flags); + spin_lock(&nmk_chip->lock); + + __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, enable); + + if (!(nmk_chip->real_wake & bitmask)) + __nmk_gpio_set_wake(nmk_chip, gpio, enable); + + spin_unlock(&nmk_chip->lock); + spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags); return 0; } static void nmk_gpio_irq_mask(struct irq_data *d) { - nmk_gpio_irq_modify(d, NORMAL, false); + nmk_gpio_irq_maskunmask(d, false); } static void nmk_gpio_irq_unmask(struct irq_data *d) { - nmk_gpio_irq_modify(d, NORMAL, true); + nmk_gpio_irq_maskunmask(d, true); } static int nmk_gpio_irq_set_wake(struct irq_data *d, unsigned int on) { + struct irq_desc *desc = irq_to_desc(d->irq); + bool enabled = !(desc->status & IRQ_DISABLED); struct nmk_gpio_chip *nmk_chip; unsigned long flags; + u32 bitmask; int gpio; gpio = NOMADIK_IRQ_TO_GPIO(d->irq); nmk_chip = irq_data_get_irq_chip_data(d); if (!nmk_chip) return -EINVAL; + bitmask = nmk_gpio_get_bitmask(gpio); - spin_lock_irqsave(&nmk_chip->lock, flags); -#ifdef CONFIG_ARCH_U8500 - if (cpu_is_u8500v2()) { - __nmk_gpio_set_slpm(nmk_chip, gpio, - on ? NMK_GPIO_SLPM_WAKEUP_ENABLE - : NMK_GPIO_SLPM_WAKEUP_DISABLE); - } -#endif - __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on); - spin_unlock_irqrestore(&nmk_chip->lock, flags); + spin_lock_irqsave(&nmk_gpio_slpm_lock, flags); + spin_lock(&nmk_chip->lock); + + if (!enabled) + __nmk_gpio_set_wake(nmk_chip, gpio, on); + + if (on) + nmk_chip->real_wake |= bitmask; + else + nmk_chip->real_wake &= ~bitmask; + + spin_unlock(&nmk_chip->lock); + spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags); return 0; } @@ -483,7 +646,7 @@ static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type) if (enabled) __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, false); - if (wake) + if (enabled || wake) __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, false); nmk_chip->edge_rising &= ~bitmask; @@ -497,7 +660,7 @@ static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type) if (enabled) __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, true); - if (wake) + if (enabled || wake) __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, true); spin_unlock_irqrestore(&nmk_chip->lock, flags); @@ -514,12 +677,11 @@ static struct irq_chip nmk_gpio_irq_chip = { .irq_set_wake = nmk_gpio_irq_set_wake, }; -static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) +static void __nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc, + u32 status) { struct nmk_gpio_chip *nmk_chip; struct irq_chip *host_chip = get_irq_chip(irq); - unsigned int gpio_irq; - u32 pending; unsigned int first_irq; if (host_chip->irq_mask_ack) @@ -532,29 +694,56 @@ static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) nmk_chip = get_irq_data(irq); first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base); - while ( (pending = readl(nmk_chip->addr + NMK_GPIO_IS)) ) { - gpio_irq = first_irq + __ffs(pending); - generic_handle_irq(gpio_irq); + while (status) { + int bit = __ffs(status); + + generic_handle_irq(first_irq + bit); + status &= ~BIT(bit); } host_chip->irq_unmask(&desc->irq_data); } +static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + struct nmk_gpio_chip *nmk_chip = get_irq_data(irq); + u32 status = readl(nmk_chip->addr + NMK_GPIO_IS); + + __nmk_gpio_irq_handler(irq, desc, status); +} + +static void nmk_gpio_secondary_irq_handler(unsigned int irq, + struct irq_desc *desc) +{ + struct nmk_gpio_chip *nmk_chip = get_irq_data(irq); + u32 status = nmk_chip->get_secondary_status(nmk_chip->bank); + + __nmk_gpio_irq_handler(irq, desc, status); +} + static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip) { unsigned int first_irq; int i; first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base); - for (i = first_irq; i < first_irq + NMK_GPIO_PER_CHIP; i++) { + for (i = first_irq; i < first_irq + nmk_chip->chip.ngpio; i++) { set_irq_chip(i, &nmk_gpio_irq_chip); set_irq_handler(i, handle_edge_irq); set_irq_flags(i, IRQF_VALID); set_irq_chip_data(i, nmk_chip); set_irq_type(i, IRQ_TYPE_EDGE_FALLING); } + set_irq_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler); set_irq_data(nmk_chip->parent_irq, nmk_chip); + + if (nmk_chip->secondary_parent_irq >= 0) { + set_irq_chained_handler(nmk_chip->secondary_parent_irq, + nmk_gpio_secondary_irq_handler); + set_irq_data(nmk_chip->secondary_parent_irq, nmk_chip); + } + return 0; } @@ -605,6 +794,97 @@ static int nmk_gpio_to_irq(struct gpio_chip *chip, unsigned offset) return NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base) + offset; } +#ifdef CONFIG_DEBUG_FS + +#include <linux/seq_file.h> + +static void nmk_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + int mode; + unsigned i; + unsigned gpio = chip->base; + int is_out; + struct nmk_gpio_chip *nmk_chip = + container_of(chip, struct nmk_gpio_chip, chip); + const char *modes[] = { + [NMK_GPIO_ALT_GPIO] = "gpio", + [NMK_GPIO_ALT_A] = "altA", + [NMK_GPIO_ALT_B] = "altB", + [NMK_GPIO_ALT_C] = "altC", + }; + + for (i = 0; i < chip->ngpio; i++, gpio++) { + const char *label = gpiochip_is_requested(chip, i); + bool pull; + u32 bit = 1 << i; + + if (!label) + continue; + + is_out = readl(nmk_chip->addr + NMK_GPIO_DIR) & bit; + pull = !(readl(nmk_chip->addr + NMK_GPIO_PDIS) & bit); + mode = nmk_gpio_get_mode(gpio); + seq_printf(s, " gpio-%-3d (%-20.20s) %s %s %s %s", + gpio, label, + is_out ? "out" : "in ", + chip->get + ? (chip->get(chip, i) ? "hi" : "lo") + : "? ", + (mode < 0) ? "unknown" : modes[mode], + pull ? "pull" : "none"); + + if (!is_out) { + int irq = gpio_to_irq(gpio); + struct irq_desc *desc = irq_to_desc(irq); + + /* This races with request_irq(), set_irq_type(), + * and set_irq_wake() ... but those are "rare". + * + * More significantly, trigger type flags aren't + * currently maintained by genirq. + */ + if (irq >= 0 && desc->action) { + char *trigger; + + switch (desc->status & IRQ_TYPE_SENSE_MASK) { + case IRQ_TYPE_NONE: + trigger = "(default)"; + break; + case IRQ_TYPE_EDGE_FALLING: + trigger = "edge-falling"; + break; + case IRQ_TYPE_EDGE_RISING: + trigger = "edge-rising"; + break; + case IRQ_TYPE_EDGE_BOTH: + trigger = "edge-both"; + break; + case IRQ_TYPE_LEVEL_HIGH: + trigger = "level-high"; + break; + case IRQ_TYPE_LEVEL_LOW: + trigger = "level-low"; + break; + default: + trigger = "?trigger?"; + break; + } + + seq_printf(s, " irq-%d %s%s", + irq, trigger, + (desc->status & IRQ_WAKEUP) + ? " wakeup" : ""); + } + } + + seq_printf(s, "\n"); + } +} + +#else +#define nmk_gpio_dbg_show NULL +#endif + /* This structure is replicated for each GPIO block allocated at probe time */ static struct gpio_chip nmk_gpio_template = { .direction_input = nmk_gpio_make_input, @@ -612,10 +892,64 @@ static struct gpio_chip nmk_gpio_template = { .direction_output = nmk_gpio_make_output, .set = nmk_gpio_set_output, .to_irq = nmk_gpio_to_irq, - .ngpio = NMK_GPIO_PER_CHIP, + .dbg_show = nmk_gpio_dbg_show, .can_sleep = 0, }; +/* + * Called from the suspend/resume path to only keep the real wakeup interrupts + * (those that have had set_irq_wake() called on them) as wakeup interrupts, + * and not the rest of the interrupts which we needed to have as wakeups for + * cpuidle. + * + * PM ops are not used since this needs to be done at the end, after all the + * other drivers are done with their suspend callbacks. + */ +void nmk_gpio_wakeups_suspend(void) +{ + int i; + + for (i = 0; i < NUM_BANKS; i++) { + struct nmk_gpio_chip *chip = nmk_gpio_chips[i]; + + if (!chip) + break; + + chip->rwimsc = readl(chip->addr + NMK_GPIO_RWIMSC); + chip->fwimsc = readl(chip->addr + NMK_GPIO_FWIMSC); + + writel(chip->rwimsc & chip->real_wake, + chip->addr + NMK_GPIO_RWIMSC); + writel(chip->fwimsc & chip->real_wake, + chip->addr + NMK_GPIO_FWIMSC); + + if (cpu_is_u8500v2()) { + chip->slpm = readl(chip->addr + NMK_GPIO_SLPC); + + /* 0 -> wakeup enable */ + writel(~chip->real_wake, chip->addr + NMK_GPIO_SLPC); + } + } +} + +void nmk_gpio_wakeups_resume(void) +{ + int i; + + for (i = 0; i < NUM_BANKS; i++) { + struct nmk_gpio_chip *chip = nmk_gpio_chips[i]; + + if (!chip) + break; + + writel(chip->rwimsc, chip->addr + NMK_GPIO_RWIMSC); + writel(chip->fwimsc, chip->addr + NMK_GPIO_FWIMSC); + + if (cpu_is_u8500v2()) + writel(chip->slpm, chip->addr + NMK_GPIO_SLPC); + } +} + static int __devinit nmk_gpio_probe(struct platform_device *dev) { struct nmk_gpio_platform_data *pdata = dev->dev.platform_data; @@ -623,6 +957,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) struct gpio_chip *chip; struct resource *res; struct clk *clk; + int secondary_irq; int irq; int ret; @@ -641,6 +976,12 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) goto out; } + secondary_irq = platform_get_irq(dev, 1); + if (secondary_irq >= 0 && !pdata->get_secondary_status) { + ret = -EINVAL; + goto out; + } + if (request_mem_region(res->start, resource_size(res), dev_name(&dev->dev)) == NULL) { ret = -EBUSY; @@ -664,14 +1005,19 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) * The virt address in nmk_chip->addr is in the nomadik register space, * so we can simply convert the resource address, without remapping */ + nmk_chip->bank = dev->id; nmk_chip->clk = clk; nmk_chip->addr = io_p2v(res->start); nmk_chip->chip = nmk_gpio_template; nmk_chip->parent_irq = irq; + nmk_chip->secondary_parent_irq = secondary_irq; + nmk_chip->get_secondary_status = pdata->get_secondary_status; + nmk_chip->set_ioforce = pdata->set_ioforce; spin_lock_init(&nmk_chip->lock); chip = &nmk_chip->chip; chip->base = pdata->first_gpio; + chip->ngpio = pdata->num_gpio; chip->label = pdata->name ?: dev_name(&dev->dev); chip->dev = &dev->dev; chip->owner = THIS_MODULE; @@ -680,6 +1026,9 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) if (ret) goto out_free; + BUG_ON(nmk_chip->bank >= ARRAY_SIZE(nmk_gpio_chips)); + + nmk_gpio_chips[nmk_chip->bank] = nmk_chip; platform_set_drvdata(dev, nmk_chip); nmk_gpio_init_irq(nmk_chip); @@ -705,10 +1054,8 @@ static struct platform_driver nmk_gpio_driver = { .driver = { .owner = THIS_MODULE, .name = "gpio", - }, + }, .probe = nmk_gpio_probe, - .suspend = NULL, /* to be done */ - .resume = NULL, }; static int __init nmk_gpio_init(void) diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h index 67b113d639d..1b9f6f0843d 100644 --- a/arch/arm/plat-nomadik/include/plat/gpio.h +++ b/arch/arm/plat-nomadik/include/plat/gpio.h @@ -75,6 +75,9 @@ extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull); extern int nmk_gpio_set_mode(int gpio, int gpio_mode); extern int nmk_gpio_get_mode(int gpio); +extern void nmk_gpio_wakeups_suspend(void); +extern void nmk_gpio_wakeups_resume(void); + /* * Platform data to register a block: only the initial gpio/irq number. */ @@ -82,6 +85,9 @@ struct nmk_gpio_platform_data { char *name; int first_gpio; int first_irq; + int num_gpio; + u32 (*get_secondary_status)(unsigned int bank); + void (*set_ioforce)(bool enable); }; #endif /* __ASM_PLAT_GPIO_H */ diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index 5f352231481..078894bc3b9 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -17,55 +17,123 @@ #include <linux/io.h> #include <linux/gpio.h> -static DEFINE_SPINLOCK(gpio_lock); -static unsigned long gpio_valid_input[BITS_TO_LONGS(GPIO_MAX)]; -static unsigned long gpio_valid_output[BITS_TO_LONGS(GPIO_MAX)]; +/* + * GPIO unit register offsets. + */ +#define GPIO_OUT_OFF 0x0000 +#define GPIO_IO_CONF_OFF 0x0004 +#define GPIO_BLINK_EN_OFF 0x0008 +#define GPIO_IN_POL_OFF 0x000c +#define GPIO_DATA_IN_OFF 0x0010 +#define GPIO_EDGE_CAUSE_OFF 0x0014 +#define GPIO_EDGE_MASK_OFF 0x0018 +#define GPIO_LEVEL_MASK_OFF 0x001c + +struct orion_gpio_chip { + struct gpio_chip chip; + spinlock_t lock; + void __iomem *base; + unsigned long valid_input; + unsigned long valid_output; + int mask_offset; + int secondary_irq_base; +}; + +static void __iomem *GPIO_OUT(struct orion_gpio_chip *ochip) +{ + return ochip->base + GPIO_OUT_OFF; +} + +static void __iomem *GPIO_IO_CONF(struct orion_gpio_chip *ochip) +{ + return ochip->base + GPIO_IO_CONF_OFF; +} + +static void __iomem *GPIO_BLINK_EN(struct orion_gpio_chip *ochip) +{ + return ochip->base + GPIO_BLINK_EN_OFF; +} + +static void __iomem *GPIO_IN_POL(struct orion_gpio_chip *ochip) +{ + return ochip->base + GPIO_IN_POL_OFF; +} + +static void __iomem *GPIO_DATA_IN(struct orion_gpio_chip *ochip) +{ + return ochip->base + GPIO_DATA_IN_OFF; +} + +static void __iomem *GPIO_EDGE_CAUSE(struct orion_gpio_chip *ochip) +{ + return ochip->base + GPIO_EDGE_CAUSE_OFF; +} + +static void __iomem *GPIO_EDGE_MASK(struct orion_gpio_chip *ochip) +{ + return ochip->base + ochip->mask_offset + GPIO_EDGE_MASK_OFF; +} + +static void __iomem *GPIO_LEVEL_MASK(struct orion_gpio_chip *ochip) +{ + return ochip->base + ochip->mask_offset + GPIO_LEVEL_MASK_OFF; +} + -static inline void __set_direction(unsigned pin, int input) +static struct orion_gpio_chip orion_gpio_chips[2]; +static int orion_gpio_chip_count; + +static inline void +__set_direction(struct orion_gpio_chip *ochip, unsigned pin, int input) { u32 u; - u = readl(GPIO_IO_CONF(pin)); + u = readl(GPIO_IO_CONF(ochip)); if (input) - u |= 1 << (pin & 31); + u |= 1 << pin; else - u &= ~(1 << (pin & 31)); - writel(u, GPIO_IO_CONF(pin)); + u &= ~(1 << pin); + writel(u, GPIO_IO_CONF(ochip)); } -static void __set_level(unsigned pin, int high) +static void __set_level(struct orion_gpio_chip *ochip, unsigned pin, int high) { u32 u; - u = readl(GPIO_OUT(pin)); + u = readl(GPIO_OUT(ochip)); if (high) - u |= 1 << (pin & 31); + u |= 1 << pin; else - u &= ~(1 << (pin & 31)); - writel(u, GPIO_OUT(pin)); + u &= ~(1 << pin); + writel(u, GPIO_OUT(ochip)); } -static inline void __set_blinking(unsigned pin, int blink) +static inline void +__set_blinking(struct orion_gpio_chip *ochip, unsigned pin, int blink) { u32 u; - u = readl(GPIO_BLINK_EN(pin)); + u = readl(GPIO_BLINK_EN(ochip)); if (blink) - u |= 1 << (pin & 31); + u |= 1 << pin; else - u &= ~(1 << (pin & 31)); - writel(u, GPIO_BLINK_EN(pin)); + u &= ~(1 << pin); + writel(u, GPIO_BLINK_EN(ochip)); } -static inline int orion_gpio_is_valid(unsigned pin, int mode) +static inline int +orion_gpio_is_valid(struct orion_gpio_chip *ochip, unsigned pin, int mode) { - if (pin < GPIO_MAX) { - if ((mode & GPIO_INPUT_OK) && !test_bit(pin, gpio_valid_input)) - goto err_out; - if ((mode & GPIO_OUTPUT_OK) && !test_bit(pin, gpio_valid_output)) - goto err_out; - return true; - } + if (pin >= ochip->chip.ngpio) + goto err_out; + + if ((mode & GPIO_INPUT_OK) && !test_bit(pin, &ochip->valid_input)) + goto err_out; + + if ((mode & GPIO_OUTPUT_OK) && !test_bit(pin, &ochip->valid_output)) + goto err_out; + + return 1; err_out: pr_debug("%s: invalid GPIO %d\n", __func__, pin); @@ -75,134 +143,155 @@ err_out: /* * GENERIC_GPIO primitives. */ +static int orion_gpio_request(struct gpio_chip *chip, unsigned pin) +{ + struct orion_gpio_chip *ochip = + container_of(chip, struct orion_gpio_chip, chip); + + if (orion_gpio_is_valid(ochip, pin, GPIO_INPUT_OK) || + orion_gpio_is_valid(ochip, pin, GPIO_OUTPUT_OK)) + return 0; + + return -EINVAL; +} + static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin) { + struct orion_gpio_chip *ochip = + container_of(chip, struct orion_gpio_chip, chip); unsigned long flags; - if (!orion_gpio_is_valid(pin, GPIO_INPUT_OK)) + if (!orion_gpio_is_valid(ochip, pin, GPIO_INPUT_OK)) return -EINVAL; - spin_lock_irqsave(&gpio_lock, flags); - - /* Configure GPIO direction. */ - __set_direction(pin, 1); - - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&ochip->lock, flags); + __set_direction(ochip, pin, 1); + spin_unlock_irqrestore(&ochip->lock, flags); return 0; } -static int orion_gpio_get_value(struct gpio_chip *chip, unsigned pin) +static int orion_gpio_get(struct gpio_chip *chip, unsigned pin) { + struct orion_gpio_chip *ochip = + container_of(chip, struct orion_gpio_chip, chip); int val; - if (readl(GPIO_IO_CONF(pin)) & (1 << (pin & 31))) - val = readl(GPIO_DATA_IN(pin)) ^ readl(GPIO_IN_POL(pin)); - else - val = readl(GPIO_OUT(pin)); + if (readl(GPIO_IO_CONF(ochip)) & (1 << pin)) { + val = readl(GPIO_DATA_IN(ochip)) ^ readl(GPIO_IN_POL(ochip)); + } else { + val = readl(GPIO_OUT(ochip)); + } - return (val >> (pin & 31)) & 1; + return (val >> pin) & 1; } -static int orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin, - int value) +static int +orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin, int value) { + struct orion_gpio_chip *ochip = + container_of(chip, struct orion_gpio_chip, chip); unsigned long flags; - if (!orion_gpio_is_valid(pin, GPIO_OUTPUT_OK)) + if (!orion_gpio_is_valid(ochip, pin, GPIO_OUTPUT_OK)) return -EINVAL; - spin_lock_irqsave(&gpio_lock, flags); - - /* Disable blinking. */ - __set_blinking(pin, 0); - - /* Configure GPIO output value. */ - __set_level(pin, value); - - /* Configure GPIO direction. */ - __set_direction(pin, 0); - - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&ochip->lock, flags); + __set_blinking(ochip, pin, 0); + __set_level(ochip, pin, value); + __set_direction(ochip, pin, 0); + spin_unlock_irqrestore(&ochip->lock, flags); return 0; } -static void orion_gpio_set_value(struct gpio_chip *chip, unsigned pin, - int value) +static void orion_gpio_set(struct gpio_chip *chip, unsigned pin, int value) { + struct orion_gpio_chip *ochip = + container_of(chip, struct orion_gpio_chip, chip); unsigned long flags; - spin_lock_irqsave(&gpio_lock, flags); - - /* Configure GPIO output value. */ - __set_level(pin, value); - - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&ochip->lock, flags); + __set_level(ochip, pin, value); + spin_unlock_irqrestore(&ochip->lock, flags); } -static int orion_gpio_request(struct gpio_chip *chip, unsigned pin) +static int orion_gpio_to_irq(struct gpio_chip *chip, unsigned pin) { - if (orion_gpio_is_valid(pin, GPIO_INPUT_OK) || - orion_gpio_is_valid(pin, GPIO_OUTPUT_OK)) - return 0; - return -EINVAL; -} + struct orion_gpio_chip *ochip = + container_of(chip, struct orion_gpio_chip, chip); -static struct gpio_chip orion_gpiochip = { - .label = "orion_gpio", - .direction_input = orion_gpio_direction_input, - .get = orion_gpio_get_value, - .direction_output = orion_gpio_direction_output, - .set = orion_gpio_set_value, - .request = orion_gpio_request, - .base = 0, - .ngpio = GPIO_MAX, - .can_sleep = 0, -}; - -void __init orion_gpio_init(void) -{ - gpiochip_add(&orion_gpiochip); + return ochip->secondary_irq_base + pin; } + /* * Orion-specific GPIO API extensions. */ +static struct orion_gpio_chip *orion_gpio_chip_find(int pin) +{ + int i; + + for (i = 0; i < orion_gpio_chip_count; i++) { + struct orion_gpio_chip *ochip = orion_gpio_chips + i; + struct gpio_chip *chip = &ochip->chip; + + if (pin >= chip->base && pin < chip->base + chip->ngpio) + return ochip; + } + + return NULL; +} + void __init orion_gpio_set_unused(unsigned pin) { + struct orion_gpio_chip *ochip = orion_gpio_chip_find(pin); + + if (ochip == NULL) + return; + + pin -= ochip->chip.base; + /* Configure as output, drive low. */ - __set_level(pin, 0); - __set_direction(pin, 0); + __set_level(ochip, pin, 0); + __set_direction(ochip, pin, 0); } void __init orion_gpio_set_valid(unsigned pin, int mode) { + struct orion_gpio_chip *ochip = orion_gpio_chip_find(pin); + + if (ochip == NULL) + return; + + pin -= ochip->chip.base; + if (mode == 1) mode = GPIO_INPUT_OK | GPIO_OUTPUT_OK; + if (mode & GPIO_INPUT_OK) - __set_bit(pin, gpio_valid_input); + __set_bit(pin, &ochip->valid_input); else - __clear_bit(pin, gpio_valid_input); + __clear_bit(pin, &ochip->valid_input); + if (mode & GPIO_OUTPUT_OK) - __set_bit(pin, gpio_valid_output); + __set_bit(pin, &ochip->valid_output); else - __clear_bit(pin, gpio_valid_output); + __clear_bit(pin, &ochip->valid_output); } void orion_gpio_set_blink(unsigned pin, int blink) { + struct orion_gpio_chip *ochip = orion_gpio_chip_find(pin); unsigned long flags; - spin_lock_irqsave(&gpio_lock, flags); + if (ochip == NULL) + return; - /* Set output value to zero. */ - __set_level(pin, 0); - - /* Set blinking. */ - __set_blinking(pin, blink); - - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&ochip->lock, flags); + __set_level(ochip, pin, 0); + __set_blinking(ochip, pin, blink); + spin_unlock_irqrestore(&ochip->lock, flags); } EXPORT_SYMBOL(orion_gpio_set_blink); @@ -234,59 +323,78 @@ EXPORT_SYMBOL(orion_gpio_set_blink); ****************************************************************************/ static void gpio_irq_ack(struct irq_data *d) { - int type = irq_desc[d->irq].status & IRQ_TYPE_SENSE_MASK; + struct orion_gpio_chip *ochip = irq_data_get_irq_chip_data(d); + int type; + + type = irq_desc[d->irq].status & IRQ_TYPE_SENSE_MASK; if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { - int pin = irq_to_gpio(d->irq); - writel(~(1 << (pin & 31)), GPIO_EDGE_CAUSE(pin)); + int pin = d->irq - ochip->secondary_irq_base; + + writel(~(1 << pin), GPIO_EDGE_CAUSE(ochip)); } } static void gpio_irq_mask(struct irq_data *d) { - int pin = irq_to_gpio(d->irq); - int type = irq_desc[d->irq].status & IRQ_TYPE_SENSE_MASK; - u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ? - GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin); - u32 u = readl(reg); - u &= ~(1 << (pin & 31)); - writel(u, reg); + struct orion_gpio_chip *ochip = irq_data_get_irq_chip_data(d); + int type; + void __iomem *reg; + int pin; + + type = irq_desc[d->irq].status & IRQ_TYPE_SENSE_MASK; + if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) + reg = GPIO_EDGE_MASK(ochip); + else + reg = GPIO_LEVEL_MASK(ochip); + + pin = d->irq - ochip->secondary_irq_base; + + writel(readl(reg) & ~(1 << pin), reg); } static void gpio_irq_unmask(struct irq_data *d) { - int pin = irq_to_gpio(d->irq); - int type = irq_desc[d->irq].status & IRQ_TYPE_SENSE_MASK; - u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ? - GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin); - u32 u = readl(reg); - u |= 1 << (pin & 31); - writel(u, reg); + struct orion_gpio_chip *ochip = irq_data_get_irq_chip_data(d); + int type; + void __iomem *reg; + int pin; + + type = irq_desc[d->irq].status & IRQ_TYPE_SENSE_MASK; + if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) + reg = GPIO_EDGE_MASK(ochip); + else + reg = GPIO_LEVEL_MASK(ochip); + + pin = d->irq - ochip->secondary_irq_base; + + writel(readl(reg) | (1 << pin), reg); } static int gpio_irq_set_type(struct irq_data *d, u32 type) { - int pin = irq_to_gpio(d->irq); - struct irq_desc *desc; + struct orion_gpio_chip *ochip = irq_data_get_irq_chip_data(d); + int pin; u32 u; - u = readl(GPIO_IO_CONF(pin)) & (1 << (pin & 31)); + pin = d->irq - ochip->secondary_irq_base; + + u = readl(GPIO_IO_CONF(ochip)) & (1 << pin); if (!u) { printk(KERN_ERR "orion gpio_irq_set_type failed " "(irq %d, pin %d).\n", d->irq, pin); return -EINVAL; } - desc = irq_desc + d->irq; - /* * Set edge/level type. */ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { - desc->handle_irq = handle_edge_irq; + set_irq_handler(d->irq, handle_edge_irq); } else if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { - desc->handle_irq = handle_level_irq; + set_irq_handler(d->irq, handle_level_irq); } else { - printk(KERN_ERR "failed to set irq=%d (type=%d)\n", d->irq, type); + printk(KERN_ERR "failed to set irq=%d (type=%d)\n", + d->irq, type); return -EINVAL; } @@ -294,31 +402,29 @@ static int gpio_irq_set_type(struct irq_data *d, u32 type) * Configure interrupt polarity. */ if (type == IRQ_TYPE_EDGE_RISING || type == IRQ_TYPE_LEVEL_HIGH) { - u = readl(GPIO_IN_POL(pin)); - u &= ~(1 << (pin & 31)); - writel(u, GPIO_IN_POL(pin)); + u = readl(GPIO_IN_POL(ochip)); + u &= ~(1 << pin); + writel(u, GPIO_IN_POL(ochip)); } else if (type == IRQ_TYPE_EDGE_FALLING || type == IRQ_TYPE_LEVEL_LOW) { - u = readl(GPIO_IN_POL(pin)); - u |= 1 << (pin & 31); - writel(u, GPIO_IN_POL(pin)); + u = readl(GPIO_IN_POL(ochip)); + u |= 1 << pin; + writel(u, GPIO_IN_POL(ochip)); } else if (type == IRQ_TYPE_EDGE_BOTH) { u32 v; - v = readl(GPIO_IN_POL(pin)) ^ readl(GPIO_DATA_IN(pin)); + v = readl(GPIO_IN_POL(ochip)) ^ readl(GPIO_DATA_IN(ochip)); /* * set initial polarity based on current input level */ - u = readl(GPIO_IN_POL(pin)); - if (v & (1 << (pin & 31))) - u |= 1 << (pin & 31); /* falling */ + u = readl(GPIO_IN_POL(ochip)); + if (v & (1 << pin)) + u |= 1 << pin; /* falling */ else - u &= ~(1 << (pin & 31)); /* rising */ - writel(u, GPIO_IN_POL(pin)); + u &= ~(1 << pin); /* rising */ + writel(u, GPIO_IN_POL(ochip)); } - desc->status = (desc->status & ~IRQ_TYPE_SENSE_MASK) | type; - return 0; } @@ -330,29 +436,87 @@ struct irq_chip orion_gpio_irq_chip = { .irq_set_type = gpio_irq_set_type, }; +void __init orion_gpio_init(int gpio_base, int ngpio, + u32 base, int mask_offset, int secondary_irq_base) +{ + struct orion_gpio_chip *ochip; + int i; + + if (orion_gpio_chip_count == ARRAY_SIZE(orion_gpio_chips)) + return; + + ochip = orion_gpio_chips + orion_gpio_chip_count; + ochip->chip.label = "orion_gpio"; + ochip->chip.request = orion_gpio_request; + ochip->chip.direction_input = orion_gpio_direction_input; + ochip->chip.get = orion_gpio_get; + ochip->chip.direction_output = orion_gpio_direction_output; + ochip->chip.set = orion_gpio_set; + ochip->chip.to_irq = orion_gpio_to_irq; + ochip->chip.base = gpio_base; + ochip->chip.ngpio = ngpio; + ochip->chip.can_sleep = 0; + spin_lock_init(&ochip->lock); + ochip->base = (void __iomem *)base; + ochip->valid_input = 0; + ochip->valid_output = 0; + ochip->mask_offset = mask_offset; + ochip->secondary_irq_base = secondary_irq_base; + + gpiochip_add(&ochip->chip); + + orion_gpio_chip_count++; + + /* + * Mask and clear GPIO interrupts. + */ + writel(0, GPIO_EDGE_CAUSE(ochip)); + writel(0, GPIO_EDGE_MASK(ochip)); + writel(0, GPIO_LEVEL_MASK(ochip)); + + for (i = 0; i < ngpio; i++) { + unsigned int irq = secondary_irq_base + i; + + set_irq_chip(irq, &orion_gpio_irq_chip); + set_irq_handler(irq, handle_level_irq); + set_irq_chip_data(irq, ochip); + irq_desc[irq].status |= IRQ_LEVEL; + set_irq_flags(irq, IRQF_VALID); + } +} + void orion_gpio_irq_handler(int pinoff) { + struct orion_gpio_chip *ochip; u32 cause; - int pin; + int i; - cause = readl(GPIO_DATA_IN(pinoff)) & readl(GPIO_LEVEL_MASK(pinoff)); - cause |= readl(GPIO_EDGE_CAUSE(pinoff)) & readl(GPIO_EDGE_MASK(pinoff)); + ochip = orion_gpio_chip_find(pinoff); + if (ochip == NULL) + return; - for (pin = pinoff; pin < pinoff + 8; pin++) { - int irq = gpio_to_irq(pin); - struct irq_desc *desc = irq_desc + irq; + cause = readl(GPIO_DATA_IN(ochip)) & readl(GPIO_LEVEL_MASK(ochip)); + cause |= readl(GPIO_EDGE_CAUSE(ochip)) & readl(GPIO_EDGE_MASK(ochip)); - if (!(cause & (1 << (pin & 31)))) + for (i = 0; i < ochip->chip.ngpio; i++) { + int irq; + struct irq_desc *desc; + + irq = ochip->secondary_irq_base + i; + + if (!(cause & (1 << i))) continue; + desc = irq_desc + irq; if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { /* Swap polarity (race with GPIO line) */ u32 polarity; - polarity = readl(GPIO_IN_POL(pin)); - polarity ^= 1 << (pin & 31); - writel(polarity, GPIO_IN_POL(pin)); + polarity = readl(GPIO_IN_POL(ochip)); + polarity ^= 1 << i; + writel(polarity, GPIO_IN_POL(ochip)); } + desc_handle_irq(irq, desc); } } diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h index 07c430fdc9e..5578b9803fc 100644 --- a/arch/arm/plat-orion/include/plat/gpio.h +++ b/arch/arm/plat-orion/include/plat/gpio.h @@ -12,6 +12,7 @@ #define __PLAT_GPIO_H #include <linux/init.h> +#include <asm-generic/gpio.h> /* * GENERIC_GPIO primitives. @@ -19,6 +20,7 @@ #define gpio_get_value __gpio_get_value #define gpio_set_value __gpio_set_value #define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq /* * Orion-specific GPIO API extensions. @@ -31,7 +33,8 @@ void orion_gpio_set_blink(unsigned pin, int blink); void orion_gpio_set_valid(unsigned pin, int mode); /* Initialize gpiolib. */ -void __init orion_gpio_init(void); +void __init orion_gpio_init(int gpio_base, int ngpio, + u32 base, int mask_offset, int secondary_irq_base); /* * GPIO interrupt handling. diff --git a/arch/arm/plat-orion/include/plat/time.h b/arch/arm/plat-orion/include/plat/time.h index c06ca35f361..4d5f1f6e18d 100644 --- a/arch/arm/plat-orion/include/plat/time.h +++ b/arch/arm/plat-orion/include/plat/time.h @@ -11,7 +11,10 @@ #ifndef __PLAT_TIME_H #define __PLAT_TIME_H -void orion_time_init(unsigned int irq, unsigned int tclk); +void orion_time_set_base(u32 timer_base); + +void orion_time_init(u32 bridge_base, u32 bridge_timer1_clr_mask, + unsigned int irq, unsigned int tclk); #endif diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c index c3da2478b2a..742b0323c57 100644 --- a/arch/arm/plat-orion/time.c +++ b/arch/arm/plat-orion/time.c @@ -18,28 +18,42 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <asm/sched_clock.h> -#include <asm/mach/time.h> -#include <mach/bridge-regs.h> -#include <mach/hardware.h> /* - * Number of timer ticks per jiffy. + * MBus bridge block registers. */ -static u32 ticks_per_jiffy; +#define BRIDGE_CAUSE_OFF 0x0110 +#define BRIDGE_MASK_OFF 0x0114 +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 /* * Timer block registers. */ -#define TIMER_CTRL (TIMER_VIRT_BASE + 0x0000) -#define TIMER0_EN 0x0001 -#define TIMER0_RELOAD_EN 0x0002 -#define TIMER1_EN 0x0004 -#define TIMER1_RELOAD_EN 0x0008 -#define TIMER0_RELOAD (TIMER_VIRT_BASE + 0x0010) -#define TIMER0_VAL (TIMER_VIRT_BASE + 0x0014) -#define TIMER1_RELOAD (TIMER_VIRT_BASE + 0x0018) -#define TIMER1_VAL (TIMER_VIRT_BASE + 0x001c) +#define TIMER_CTRL_OFF 0x0000 +#define TIMER0_EN 0x0001 +#define TIMER0_RELOAD_EN 0x0002 +#define TIMER1_EN 0x0004 +#define TIMER1_RELOAD_EN 0x0008 +#define TIMER0_RELOAD_OFF 0x0010 +#define TIMER0_VAL_OFF 0x0014 +#define TIMER1_RELOAD_OFF 0x0018 +#define TIMER1_VAL_OFF 0x001c + + +/* + * SoC-specific data. + */ +static void __iomem *bridge_base; +static u32 bridge_timer1_clr_mask; +static void __iomem *timer_base; + + +/* + * Number of timer ticks per jiffy. + */ +static u32 ticks_per_jiffy; /* @@ -50,14 +64,14 @@ static DEFINE_CLOCK_DATA(cd); unsigned long long notrace sched_clock(void) { - u32 cyc = 0xffffffff - readl(TIMER0_VAL); + u32 cyc = ~readl(timer_base + TIMER0_VAL_OFF); return cyc_to_sched_clock(&cd, cyc, (u32)~0); } static void notrace orion_update_sched_clock(void) { - u32 cyc = 0xffffffff - readl(TIMER0_VAL); + u32 cyc = ~readl(timer_base + TIMER0_VAL_OFF); update_sched_clock(&cd, cyc, (u32)~0); } @@ -71,7 +85,7 @@ static void __init setup_sched_clock(unsigned long tclk) */ static cycle_t orion_clksrc_read(struct clocksource *cs) { - return 0xffffffff - readl(TIMER0_VAL); + return 0xffffffff - readl(timer_base + TIMER0_VAL_OFF); } static struct clocksource orion_clksrc = { @@ -101,23 +115,23 @@ orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev) /* * Clear and enable clockevent timer interrupt. */ - writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE); + writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF); - u = readl(BRIDGE_MASK); + u = readl(bridge_base + BRIDGE_MASK_OFF); u |= BRIDGE_INT_TIMER1; - writel(u, BRIDGE_MASK); + writel(u, bridge_base + BRIDGE_MASK_OFF); /* * Setup new clockevent timer value. */ - writel(delta, TIMER1_VAL); + writel(delta, timer_base + TIMER1_VAL_OFF); /* * Enable the timer. */ - u = readl(TIMER_CTRL); + u = readl(timer_base + TIMER_CTRL_OFF); u = (u & ~TIMER1_RELOAD_EN) | TIMER1_EN; - writel(u, TIMER_CTRL); + writel(u, timer_base + TIMER_CTRL_OFF); local_irq_restore(flags); @@ -135,37 +149,38 @@ orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) /* * Setup timer to fire at 1/HZ intervals. */ - writel(ticks_per_jiffy - 1, TIMER1_RELOAD); - writel(ticks_per_jiffy - 1, TIMER1_VAL); + writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD_OFF); + writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL_OFF); /* * Enable timer interrupt. */ - u = readl(BRIDGE_MASK); - writel(u | BRIDGE_INT_TIMER1, BRIDGE_MASK); + u = readl(bridge_base + BRIDGE_MASK_OFF); + writel(u | BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF); /* * Enable timer. */ - u = readl(TIMER_CTRL); - writel(u | TIMER1_EN | TIMER1_RELOAD_EN, TIMER_CTRL); + u = readl(timer_base + TIMER_CTRL_OFF); + writel(u | TIMER1_EN | TIMER1_RELOAD_EN, + timer_base + TIMER_CTRL_OFF); } else { /* * Disable timer. */ - u = readl(TIMER_CTRL); - writel(u & ~TIMER1_EN, TIMER_CTRL); + u = readl(timer_base + TIMER_CTRL_OFF); + writel(u & ~TIMER1_EN, timer_base + TIMER_CTRL_OFF); /* * Disable timer interrupt. */ - u = readl(BRIDGE_MASK); - writel(u & ~BRIDGE_INT_TIMER1, BRIDGE_MASK); + u = readl(bridge_base + BRIDGE_MASK_OFF); + writel(u & ~BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF); /* * ACK pending timer interrupt. */ - writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE); + writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF); } local_irq_restore(flags); @@ -185,7 +200,7 @@ static irqreturn_t orion_timer_interrupt(int irq, void *dev_id) /* * ACK timer interrupt and call event handler. */ - writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE); + writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF); orion_clkevt.event_handler(&orion_clkevt); return IRQ_HANDLED; @@ -197,31 +212,45 @@ static struct irqaction orion_timer_irq = { .handler = orion_timer_interrupt }; -void __init orion_time_init(unsigned int irq, unsigned int tclk) +void __init +orion_time_set_base(u32 _timer_base) +{ + timer_base = (void __iomem *)_timer_base; +} + +void __init +orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask, + unsigned int irq, unsigned int tclk) { u32 u; + /* + * Set SoC-specific data. + */ + bridge_base = (void __iomem *)_bridge_base; + bridge_timer1_clr_mask = _bridge_timer1_clr_mask; + ticks_per_jiffy = (tclk + HZ/2) / HZ; /* - * Set scale and timer for sched_clock + * Set scale and timer for sched_clock. */ setup_sched_clock(tclk); /* * Setup free-running clocksource timer (interrupts - * disabled.) + * disabled). */ - writel(0xffffffff, TIMER0_VAL); - writel(0xffffffff, TIMER0_RELOAD); - u = readl(BRIDGE_MASK); - writel(u & ~BRIDGE_INT_TIMER0, BRIDGE_MASK); - u = readl(TIMER_CTRL); - writel(u | TIMER0_EN | TIMER0_RELOAD_EN, TIMER_CTRL); + writel(0xffffffff, timer_base + TIMER0_VAL_OFF); + writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF); + u = readl(bridge_base + BRIDGE_MASK_OFF); + writel(u & ~BRIDGE_INT_TIMER0, bridge_base + BRIDGE_MASK_OFF); + u = readl(timer_base + TIMER_CTRL_OFF); + writel(u | TIMER0_EN | TIMER0_RELOAD_EN, timer_base + TIMER_CTRL_OFF); clocksource_register_hz(&orion_clksrc, tclk); /* - * Setup clockevent timer (interrupt-driven.) + * Setup clockevent timer (interrupt-driven). */ setup_irq(irq, &orion_timer_irq); orion_clkevt.mult = div_sc(tclk, NSEC_PER_SEC, orion_clkevt.shift); diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index eb105e61c74..d9c4096ebf4 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -56,13 +56,6 @@ config S3C24XX_DCLK help Clock code for supporting DCLK/CLKOUT on S3C24XX architectures -config S3C24XX_PWM - bool "PWM device support" - select HAVE_PWM - help - Support for exporting the PWM timer blocks via the pwm device - system. - # gpio configurations config S3C24XX_GPIO_EXTRA diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 557f8c507f6..84922971658 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -7,10 +7,10 @@ config PLAT_S5P bool - depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310) + depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4) default y - select ARM_VIC if !ARCH_S5PV310 - select ARM_GIC if ARCH_S5PV310 + select ARM_VIC if !ARCH_EXYNOS4 + select ARM_GIC if ARCH_EXYNOS4 select NO_IOPORT select ARCH_REQUIRE_GPIOLIB select S3C_GPIO_TRACK @@ -37,11 +37,16 @@ config S5P_GPIO_INT help Common code for the GPIO interrupts (other than external interrupts.) +config S5P_HRT + bool + help + Use the High Resolution timer support + comment "System MMU" config S5P_SYSTEM_MMU bool "S5P SYSTEM MMU" - depends on ARCH_S5PV310 + depends on ARCH_EXYNOS4 help Say Y here if you want to enable System MMU @@ -60,6 +65,11 @@ config S5P_DEV_FIMC2 help Compile in platform device definitions for FIMC controller 2 +config S5P_DEV_FIMC3 + bool + help + Compile in platform device definitions for FIMC controller 3 + config S5P_DEV_ONENAND bool help @@ -74,3 +84,8 @@ config S5P_DEV_CSIS1 bool help Compile in platform device definitions for MIPI-CSIS channel 1 + +config S5P_SETUP_MIPIPHY + bool + help + Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index 4bd5cf90897..42afff7f60b 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -22,12 +22,15 @@ obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o obj-$(CONFIG_S5P_SYSTEM_MMU) += sysmmu.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o +obj-$(CONFIG_S5P_HRT) += s5p-time.o # devices obj-$(CONFIG_S5P_DEV_FIMC0) += dev-fimc0.o obj-$(CONFIG_S5P_DEV_FIMC1) += dev-fimc1.o obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o +obj-$(CONFIG_S5P_DEV_FIMC3) += dev-fimc3.o obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o obj-$(CONFIG_S5P_DEV_CSIS0) += dev-csis0.o obj-$(CONFIG_S5P_DEV_CSIS1) += dev-csis1.o +obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index 047d31c1bbd..c3bfe9b13ac 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -1,7 +1,7 @@ /* linux/arch/arm/plat-s5p/cpu.c * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * S5P CPU Support * @@ -12,17 +12,20 @@ #include <linux/init.h> #include <linux/module.h> -#include <mach/map.h> + #include <asm/mach/arch.h> #include <asm/mach/map.h> + +#include <mach/map.h> #include <mach/regs-clock.h> + #include <plat/cpu.h> #include <plat/s5p6440.h> #include <plat/s5p6442.h> #include <plat/s5p6450.h> #include <plat/s5pc100.h> #include <plat/s5pv210.h> -#include <plat/s5pv310.h> +#include <plat/exynos4.h> /* table of supported CPUs */ @@ -31,7 +34,7 @@ static const char name_s5p6442[] = "S5P6442"; static const char name_s5p6450[] = "S5P6450"; static const char name_s5pc100[] = "S5PC100"; static const char name_s5pv210[] = "S5PV210/S5PC110"; -static const char name_s5pv310[] = "S5PV310"; +static const char name_exynos4210[] = "EXYNOS4210"; static struct cpu_table cpu_ids[] __initdata = { { @@ -75,13 +78,13 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s5pv210_init, .name = name_s5pv210, }, { - .idcode = 0x43200000, + .idcode = 0x43210000, .idmask = 0xfffff000, - .map_io = s5pv310_map_io, - .init_clocks = s5pv310_init_clocks, - .init_uarts = s5pv310_init_uarts, - .init = s5pv310_init, - .name = name_s5pv310, + .map_io = exynos4_map_io, + .init_clocks = exynos4_init_clocks, + .init_uarts = exynos4_init_uarts, + .init = exynos4_init, + .name = name_exynos4210, }, }; diff --git a/arch/arm/plat-s5p/dev-csis0.c b/arch/arm/plat-s5p/dev-csis0.c index dfab1c85f54..e3aabef5e34 100644 --- a/arch/arm/plat-s5p/dev-csis0.c +++ b/arch/arm/plat-s5p/dev-csis0.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Samsung Electronics + * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd. * * S5P series device definition for MIPI-CSIS channel 0 * diff --git a/arch/arm/plat-s5p/dev-csis1.c b/arch/arm/plat-s5p/dev-csis1.c index e3053f27fbb..08b91b58020 100644 --- a/arch/arm/plat-s5p/dev-csis1.c +++ b/arch/arm/plat-s5p/dev-csis1.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Samsung Electronics + * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd. * * S5P series device definition for MIPI-CSIS channel 1 * diff --git a/arch/arm/plat-s5p/dev-fimc3.c b/arch/arm/plat-s5p/dev-fimc3.c new file mode 100644 index 00000000000..ef31beca386 --- /dev/null +++ b/arch/arm/plat-s5p/dev-fimc3.c @@ -0,0 +1,43 @@ +/* linux/arch/arm/plat-s5p/dev-fimc3.c + * + * Copyright (c) 2010 Samsung Electronics + * + * Base S5P FIMC3 resource and device definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <mach/map.h> + +static struct resource s5p_fimc3_resource[] = { + [0] = { + .start = S5P_PA_FIMC3, + .end = S5P_PA_FIMC3 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_FIMC3, + .end = IRQ_FIMC3, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 s5p_fimc3_dma_mask = DMA_BIT_MASK(32); + +struct platform_device s5p_device_fimc3 = { + .name = "s5p-fimc", + .id = 3, + .num_resources = ARRAY_SIZE(s5p_fimc3_resource), + .resource = s5p_fimc3_resource, + .dev = { + .dma_mask = &s5p_fimc3_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; diff --git a/arch/arm/plat-s5p/include/plat/camport.h b/arch/arm/plat-s5p/include/plat/camport.h new file mode 100644 index 00000000000..71688c8ba28 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/camport.h @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * + * S5P series camera interface helper functions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef PLAT_S5P_CAMPORT_H_ +#define PLAT_S5P_CAMPORT_H_ __FILE__ + +enum s5p_camport_id { + S5P_CAMPORT_A, + S5P_CAMPORT_B, +}; + +/* + * The helper functions to configure GPIO for the camera parallel bus. + * The camera port can be multiplexed with any FIMC entity, even multiple + * FIMC entities are allowed to be attached to a single port simultaneously. + * These functions are to be used in the board setup code. + */ +int s5pv210_fimc_setup_gpio(enum s5p_camport_id id); +int exynos4_fimc_setup_gpio(enum s5p_camport_id id); + +#endif diff --git a/arch/arm/plat-s5p/include/plat/csis.h b/arch/arm/plat-s5p/include/plat/csis.h deleted file mode 100644 index 51e308c7981..00000000000 --- a/arch/arm/plat-s5p/include/plat/csis.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics - * - * S5P series MIPI CSI slave device support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef PLAT_S5P_CSIS_H_ -#define PLAT_S5P_CSIS_H_ __FILE__ - -/** - * struct s5p_platform_mipi_csis - platform data for MIPI-CSIS - * @clk_rate: bus clock frequency - * @lanes: number of data lanes used - * @alignment: data alignment in bits - * @hs_settle: HS-RX settle time - */ -struct s5p_platform_mipi_csis { - unsigned long clk_rate; - u8 lanes; - u8 alignment; - u8 hs_settle; -}; - -#endif /* PLAT_S5P_CSIS_H_ */ diff --git a/arch/arm/plat-s5p/include/plat/exynos4.h b/arch/arm/plat-s5p/include/plat/exynos4.h new file mode 100644 index 00000000000..907caab53dc --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/exynos4.h @@ -0,0 +1,34 @@ +/* linux/arch/arm/plat-s5p/include/plat/exynos4.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Header file for exynos4 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Common init code for EXYNOS4 related SoCs */ + +extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void exynos4_register_clocks(void); +extern void exynos4_setup_clocks(void); + +#ifdef CONFIG_CPU_EXYNOS4210 + +extern int exynos4_init(void); +extern void exynos4_init_irq(void); +extern void exynos4_map_io(void); +extern void exynos4_init_clocks(int xtal); +extern struct sys_timer exynos4_timer; + +#define exynos4_init_uarts exynos4_common_init_uarts + +#else +#define exynos4_init_clocks NULL +#define exynos4_init_uarts NULL +#define exynos4_map_io NULL +#define exynos4_init NULL +#endif diff --git a/arch/arm/plat-s5p/include/plat/mipi_csis.h b/arch/arm/plat-s5p/include/plat/mipi_csis.h new file mode 100644 index 00000000000..9bd254c5ed2 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/mipi_csis.h @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd. + * + * S5P series MIPI CSI slave device support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef PLAT_S5P_MIPI_CSIS_H_ +#define PLAT_S5P_MIPI_CSIS_H_ __FILE__ + +struct platform_device; + +/** + * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver + * @clk_rate: bus clock frequency + * @lanes: number of data lanes used + * @alignment: data alignment in bits + * @hs_settle: HS-RX settle time + * @fixed_phy_vdd: false to enable external D-PHY regulator management in the + * driver or true in case this regulator has no enable function + * @phy_enable: pointer to a callback controlling D-PHY enable/reset + */ +struct s5p_platform_mipi_csis { + unsigned long clk_rate; + u8 lanes; + u8 alignment; + u8 hs_settle; + bool fixed_phy_vdd; + int (*phy_enable)(struct platform_device *pdev, bool on); +}; + +/** + * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control + * @pdev: MIPI-CSIS platform device + * @on: true to enable D-PHY and deassert its reset + * false to disable D-PHY + */ +int s5p_csis_phy_enable(struct platform_device *pdev, bool on); + +#endif /* PLAT_S5P_MIPI_CSIS_H_ */ diff --git a/arch/arm/plat-s5p/include/plat/s5p-time.h b/arch/arm/plat-s5p/include/plat/s5p-time.h new file mode 100644 index 00000000000..575e88109db --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/s5p-time.h @@ -0,0 +1,40 @@ +/* linux/arch/arm/plat-s5p/include/plat/s5p-time.h + * + * Copyright 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Header file for s5p time support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_S5P_TIME_H +#define __ASM_PLAT_S5P_TIME_H __FILE__ + +/* S5P HR-Timer Clock mode */ +enum s5p_timer_mode { + S5P_PWM0, + S5P_PWM1, + S5P_PWM2, + S5P_PWM3, + S5P_PWM4, +}; + +struct s5p_timer_source { + unsigned int event_id; + unsigned int source_id; +}; + +/* Be able to sleep for atleast 4 seconds (usually more) */ +#define S5PTIMER_MIN_RANGE 4 + +#define TCNT_MAX 0xffffffff +#define NON_PERIODIC 0 +#define PERIODIC 1 + +extern void __init s5p_set_timer_source(enum s5p_timer_mode event, + enum s5p_timer_mode source); +extern struct sys_timer s5p_timer; +#endif /* __ASM_PLAT_S5P_TIME_H */ diff --git a/arch/arm/plat-s5p/include/plat/s5pv310.h b/arch/arm/plat-s5p/include/plat/s5pv310.h deleted file mode 100644 index 769c991ceb3..00000000000 --- a/arch/arm/plat-s5p/include/plat/s5pv310.h +++ /dev/null @@ -1,34 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/s5pv310.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5pv310 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S5PV310 related SoCs */ - -extern void s5pv310_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s5pv310_register_clocks(void); -extern void s5pv310_setup_clocks(void); - -#ifdef CONFIG_CPU_S5PV310 - -extern int s5pv310_init(void); -extern void s5pv310_init_irq(void); -extern void s5pv310_map_io(void); -extern void s5pv310_init_clocks(int xtal); -extern struct sys_timer s5pv310_timer; - -#define s5pv310_init_uarts s5pv310_common_init_uarts - -#else -#define s5pv310_init_clocks NULL -#define s5pv310_init_uarts NULL -#define s5pv310_map_io NULL -#define s5pv310_init NULL -#endif diff --git a/arch/arm/plat-s5p/include/plat/sysmmu.h b/arch/arm/plat-s5p/include/plat/sysmmu.h new file mode 100644 index 00000000000..bf5283c2a19 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/sysmmu.h @@ -0,0 +1,95 @@ +/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung System MMU driver for S5P platform + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM__PLAT_SYSMMU_H +#define __ASM__PLAT_SYSMMU_H __FILE__ + +enum S5P_SYSMMU_INTERRUPT_TYPE { + SYSMMU_PAGEFAULT, + SYSMMU_AR_MULTIHIT, + SYSMMU_AW_MULTIHIT, + SYSMMU_BUSERROR, + SYSMMU_AR_SECURITY, + SYSMMU_AR_ACCESS, + SYSMMU_AW_SECURITY, + SYSMMU_AW_PROTECTION, /* 7 */ + SYSMMU_FAULTS_NUM +}; + +#ifdef CONFIG_S5P_SYSTEM_MMU + +#include <mach/sysmmu.h> + +/** + * s5p_sysmmu_enable() - enable system mmu of ip + * @ips: The ip connected system mmu. + * #pgd: Base physical address of the 1st level page table + * + * This function enable system mmu to transfer address + * from virtual address to physical address + */ +void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd); + +/** + * s5p_sysmmu_disable() - disable sysmmu mmu of ip + * @ips: The ip connected system mmu. + * + * This function disable system mmu to transfer address + * from virtual address to physical address + */ +void s5p_sysmmu_disable(sysmmu_ips ips); + +/** + * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table + * @ips: The ip connected system mmu. + * @pgd: The page table base address. + * + * This function set page table base address + * When system mmu transfer address from virtaul address to physical address, + * system mmu refer address information from page table + */ +void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd); + +/** + * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu + * @ips: The ip connected system mmu. + * + * This function flush all TLB entry in system mmu + */ +void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips); + +/** s5p_sysmmu_set_fault_handler() - Fault handler for System MMUs + * @itype: type of fault. + * @pgtable_base: the physical address of page table base. This is 0 if @ips is + * SYSMMU_BUSERROR. + * @fault_addr: the device (virtual) address that the System MMU tried to + * translated. This is 0 if @ips is SYSMMU_BUSERROR. + * Called when interrupt occurred by the System MMUs + * The device drivers of peripheral devices that has a System MMU can implement + * a fault handler to resolve address translation fault by System MMU. + * The meanings of return value and parameters are described below. + + * return value: non-zero if the fault is correctly resolved. + * zero if the fault is not handled. + */ +void s5p_sysmmu_set_fault_handler(sysmmu_ips ips, + int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype, + unsigned long pgtable_base, + unsigned long fault_addr)); +#else +#define s5p_sysmmu_enable(ips, pgd) do { } while (0) +#define s5p_sysmmu_disable(ips) do { } while (0) +#define s5p_sysmmu_set_tablebase_pgd(ips, pgd) do { } while (0) +#define s5p_sysmmu_tlb_invalidate(ips) do { } while (0) +#define s5p_sysmmu_set_fault_handler(ips, handler) do { } while (0) +#endif +#endif /* __ASM_PLAT_SYSMMU_H */ diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index 3b6bf89d173..cd87d3256e0 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -17,82 +17,79 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/slab.h> #include <mach/map.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> -#define S5P_GPIOREG(x) (S5P_VA_GPIO + (x)) +#define GPIO_BASE(chip) (((unsigned long)(chip)->base) & 0xFFFFF000u) -#define GPIOINT_CON_OFFSET 0x700 -#define GPIOINT_MASK_OFFSET 0x900 -#define GPIOINT_PEND_OFFSET 0xA00 +#define CON_OFFSET 0x700 +#define MASK_OFFSET 0x900 +#define PEND_OFFSET 0xA00 +#define REG_OFFSET(x) ((x) << 2) -static struct s3c_gpio_chip *irq_chips[S5P_GPIOINT_GROUP_MAXNR]; - -static int s5p_gpioint_get_group(struct irq_data *data) -{ - struct gpio_chip *chip = irq_data_get_irq_data(data); - struct s3c_gpio_chip *s3c_chip = container_of(chip, - struct s3c_gpio_chip, chip); - int group; - - for (group = 0; group < S5P_GPIOINT_GROUP_MAXNR; group++) - if (s3c_chip == irq_chips[group]) - break; +struct s5p_gpioint_bank { + struct list_head list; + int start; + int nr_groups; + int irq; + struct s3c_gpio_chip **chips; + void (*handler)(unsigned int, struct irq_desc *); +}; - return group; -} +LIST_HEAD(banks); static int s5p_gpioint_get_offset(struct irq_data *data) { - struct gpio_chip *chip = irq_data_get_irq_data(data); - struct s3c_gpio_chip *s3c_chip = container_of(chip, - struct s3c_gpio_chip, chip); - - return data->irq - s3c_chip->irq_base; + struct s3c_gpio_chip *chip = irq_data_get_irq_data(data); + return data->irq - chip->irq_base; } static void s5p_gpioint_ack(struct irq_data *data) { + struct s3c_gpio_chip *chip = irq_data_get_irq_data(data); int group, offset, pend_offset; unsigned int value; - group = s5p_gpioint_get_group(data); + group = chip->group; offset = s5p_gpioint_get_offset(data); - pend_offset = group << 2; + pend_offset = REG_OFFSET(group); - value = __raw_readl(S5P_GPIOREG(GPIOINT_PEND_OFFSET) + pend_offset); - value |= 1 << offset; - __raw_writel(value, S5P_GPIOREG(GPIOINT_PEND_OFFSET) + pend_offset); + value = __raw_readl(GPIO_BASE(chip) + PEND_OFFSET + pend_offset); + value |= BIT(offset); + __raw_writel(value, GPIO_BASE(chip) + PEND_OFFSET + pend_offset); } static void s5p_gpioint_mask(struct irq_data *data) { + struct s3c_gpio_chip *chip = irq_data_get_irq_data(data); int group, offset, mask_offset; unsigned int value; - group = s5p_gpioint_get_group(data); + group = chip->group; offset = s5p_gpioint_get_offset(data); - mask_offset = group << 2; + mask_offset = REG_OFFSET(group); - value = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset); - value |= 1 << offset; - __raw_writel(value, S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset); + value = __raw_readl(GPIO_BASE(chip) + MASK_OFFSET + mask_offset); + value |= BIT(offset); + __raw_writel(value, GPIO_BASE(chip) + MASK_OFFSET + mask_offset); } static void s5p_gpioint_unmask(struct irq_data *data) { + struct s3c_gpio_chip *chip = irq_data_get_irq_data(data); int group, offset, mask_offset; unsigned int value; - group = s5p_gpioint_get_group(data); + group = chip->group; offset = s5p_gpioint_get_offset(data); - mask_offset = group << 2; + mask_offset = REG_OFFSET(group); - value = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset); - value &= ~(1 << offset); - __raw_writel(value, S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset); + value = __raw_readl(GPIO_BASE(chip) + MASK_OFFSET + mask_offset); + value &= ~BIT(offset); + __raw_writel(value, GPIO_BASE(chip) + MASK_OFFSET + mask_offset); } static void s5p_gpioint_mask_ack(struct irq_data *data) @@ -103,12 +100,13 @@ static void s5p_gpioint_mask_ack(struct irq_data *data) static int s5p_gpioint_set_type(struct irq_data *data, unsigned int type) { + struct s3c_gpio_chip *chip = irq_data_get_irq_data(data); int group, offset, con_offset; unsigned int value; - group = s5p_gpioint_get_group(data); + group = chip->group; offset = s5p_gpioint_get_offset(data); - con_offset = group << 2; + con_offset = REG_OFFSET(group); switch (type) { case IRQ_TYPE_EDGE_RISING: @@ -132,15 +130,15 @@ static int s5p_gpioint_set_type(struct irq_data *data, unsigned int type) return -EINVAL; } - value = __raw_readl(S5P_GPIOREG(GPIOINT_CON_OFFSET) + con_offset); + value = __raw_readl(GPIO_BASE(chip) + CON_OFFSET + con_offset); value &= ~(0x7 << (offset * 0x4)); value |= (type << (offset * 0x4)); - __raw_writel(value, S5P_GPIOREG(GPIOINT_CON_OFFSET) + con_offset); + __raw_writel(value, GPIO_BASE(chip) + CON_OFFSET + con_offset); return 0; } -struct irq_chip s5p_gpioint = { +static struct irq_chip s5p_gpioint = { .name = "s5p_gpioint", .irq_ack = s5p_gpioint_ack, .irq_mask = s5p_gpioint_mask, @@ -151,30 +149,29 @@ struct irq_chip s5p_gpioint = { static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) { - int group, offset, pend_offset, mask_offset; - int real_irq; + struct s5p_gpioint_bank *bank = get_irq_data(irq); + int group, pend_offset, mask_offset; unsigned int pend, mask; - for (group = 0; group < S5P_GPIOINT_GROUP_MAXNR; group++) { - pend_offset = group << 2; - pend = __raw_readl(S5P_GPIOREG(GPIOINT_PEND_OFFSET) + - pend_offset); + for (group = 0; group < bank->nr_groups; group++) { + struct s3c_gpio_chip *chip = bank->chips[group]; + if (!chip) + continue; + + pend_offset = REG_OFFSET(group); + pend = __raw_readl(GPIO_BASE(chip) + PEND_OFFSET + pend_offset); if (!pend) continue; - mask_offset = group << 2; - mask = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) + - mask_offset); + mask_offset = REG_OFFSET(group); + mask = __raw_readl(GPIO_BASE(chip) + MASK_OFFSET + mask_offset); pend &= ~mask; - for (offset = 0; offset < 8; offset++) { - if (pend & (1 << offset)) { - struct s3c_gpio_chip *chip = irq_chips[group]; - if (chip) { - real_irq = chip->irq_base + offset; - generic_handle_irq(real_irq); - } - } + while (pend) { + int offset = fls(pend) - 1; + int real_irq = chip->irq_base + offset; + generic_handle_irq(real_irq); + pend &= ~BIT(offset); } } } @@ -182,27 +179,48 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) { static int used_gpioint_groups = 0; - static bool handler_registered = 0; int irq, group = chip->group; int i; + struct s5p_gpioint_bank *bank = NULL; if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT) return -ENOMEM; + list_for_each_entry(bank, &banks, list) { + if (group >= bank->start && + group < bank->start + bank->nr_groups) + break; + } + if (!bank) + return -EINVAL; + + if (!bank->handler) { + bank->chips = kzalloc(sizeof(struct s3c_gpio_chip *) * + bank->nr_groups, GFP_KERNEL); + if (!bank->chips) + return -ENOMEM; + + set_irq_chained_handler(bank->irq, s5p_gpioint_handler); + set_irq_data(bank->irq, bank); + bank->handler = s5p_gpioint_handler; + printk(KERN_INFO "Registered chained gpio int handler for interrupt %d.\n", + bank->irq); + } + + /* + * chained GPIO irq has been sucessfully registered, allocate new gpio + * int group and assign irq nubmers + */ + chip->irq_base = S5P_GPIOINT_BASE + used_gpioint_groups * S5P_GPIOINT_GROUP_SIZE; used_gpioint_groups++; - if (!handler_registered) { - set_irq_chained_handler(IRQ_GPIOINT, s5p_gpioint_handler); - handler_registered = 1; - } - - irq_chips[group] = chip; + bank->chips[group - bank->start] = chip; for (i = 0; i < chip->chip.ngpio; i++) { irq = chip->irq_base + i; set_irq_chip(irq, &s5p_gpioint); - set_irq_data(irq, &chip->chip); + set_irq_data(irq, chip); set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } @@ -235,3 +253,19 @@ int __init s5p_register_gpio_interrupt(int pin) } return ret; } + +int __init s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups) +{ + struct s5p_gpioint_bank *bank; + + bank = kzalloc(sizeof(*bank), GFP_KERNEL); + if (!bank) + return -ENOMEM; + + bank->start = start; + bank->nr_groups = nr_groups; + bank->irq = chain_irq; + + list_add_tail(&bank->list, &banks); + return 0; +} diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-s5p/s5p-time.c new file mode 100644 index 00000000000..8090403eec0 --- /dev/null +++ b/arch/arm/plat-s5p/s5p-time.c @@ -0,0 +1,448 @@ +/* linux/arch/arm/plat-s5p/s5p-time.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P - Common hr-timer support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/platform_device.h> + +#include <asm/smp_twd.h> +#include <asm/mach/time.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/sched_clock.h> + +#include <mach/map.h> +#include <plat/devs.h> +#include <plat/regs-timer.h> +#include <plat/s5p-time.h> + +static struct clk *tin_event; +static struct clk *tin_source; +static struct clk *tdiv_event; +static struct clk *tdiv_source; +static struct clk *timerclk; +static struct s5p_timer_source timer_source; +static unsigned long clock_count_per_tick; +static void s5p_timer_resume(void); + +static void s5p_time_stop(enum s5p_timer_mode mode) +{ + unsigned long tcon; + + tcon = __raw_readl(S3C2410_TCON); + + switch (mode) { + case S5P_PWM0: + tcon &= ~S3C2410_TCON_T0START; + break; + + case S5P_PWM1: + tcon &= ~S3C2410_TCON_T1START; + break; + + case S5P_PWM2: + tcon &= ~S3C2410_TCON_T2START; + break; + + case S5P_PWM3: + tcon &= ~S3C2410_TCON_T3START; + break; + + case S5P_PWM4: + tcon &= ~S3C2410_TCON_T4START; + break; + + default: + printk(KERN_ERR "Invalid Timer %d\n", mode); + break; + } + __raw_writel(tcon, S3C2410_TCON); +} + +static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long tcnt) +{ + unsigned long tcon; + + tcon = __raw_readl(S3C2410_TCON); + + tcnt--; + + switch (mode) { + case S5P_PWM0: + tcon &= ~(0x0f << 0); + tcon |= S3C2410_TCON_T0MANUALUPD; + break; + + case S5P_PWM1: + tcon &= ~(0x0f << 8); + tcon |= S3C2410_TCON_T1MANUALUPD; + break; + + case S5P_PWM2: + tcon &= ~(0x0f << 12); + tcon |= S3C2410_TCON_T2MANUALUPD; + break; + + case S5P_PWM3: + tcon &= ~(0x0f << 16); + tcon |= S3C2410_TCON_T3MANUALUPD; + break; + + case S5P_PWM4: + tcon &= ~(0x07 << 20); + tcon |= S3C2410_TCON_T4MANUALUPD; + break; + + default: + printk(KERN_ERR "Invalid Timer %d\n", mode); + break; + } + + __raw_writel(tcnt, S3C2410_TCNTB(mode)); + __raw_writel(tcnt, S3C2410_TCMPB(mode)); + __raw_writel(tcon, S3C2410_TCON); +} + +static void s5p_time_start(enum s5p_timer_mode mode, bool periodic) +{ + unsigned long tcon; + + tcon = __raw_readl(S3C2410_TCON); + + switch (mode) { + case S5P_PWM0: + tcon |= S3C2410_TCON_T0START; + tcon &= ~S3C2410_TCON_T0MANUALUPD; + + if (periodic) + tcon |= S3C2410_TCON_T0RELOAD; + else + tcon &= ~S3C2410_TCON_T0RELOAD; + break; + + case S5P_PWM1: + tcon |= S3C2410_TCON_T1START; + tcon &= ~S3C2410_TCON_T1MANUALUPD; + + if (periodic) + tcon |= S3C2410_TCON_T1RELOAD; + else + tcon &= ~S3C2410_TCON_T1RELOAD; + break; + + case S5P_PWM2: + tcon |= S3C2410_TCON_T2START; + tcon &= ~S3C2410_TCON_T2MANUALUPD; + + if (periodic) + tcon |= S3C2410_TCON_T2RELOAD; + else + tcon &= ~S3C2410_TCON_T2RELOAD; + break; + + case S5P_PWM3: + tcon |= S3C2410_TCON_T3START; + tcon &= ~S3C2410_TCON_T3MANUALUPD; + + if (periodic) + tcon |= S3C2410_TCON_T3RELOAD; + else + tcon &= ~S3C2410_TCON_T3RELOAD; + break; + + case S5P_PWM4: + tcon |= S3C2410_TCON_T4START; + tcon &= ~S3C2410_TCON_T4MANUALUPD; + + if (periodic) + tcon |= S3C2410_TCON_T4RELOAD; + else + tcon &= ~S3C2410_TCON_T4RELOAD; + break; + + default: + printk(KERN_ERR "Invalid Timer %d\n", mode); + break; + } + __raw_writel(tcon, S3C2410_TCON); +} + +static int s5p_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + s5p_time_setup(timer_source.event_id, cycles); + s5p_time_start(timer_source.event_id, NON_PERIODIC); + + return 0; +} + +static void s5p_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + s5p_time_stop(timer_source.event_id); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + s5p_time_setup(timer_source.event_id, clock_count_per_tick); + s5p_time_start(timer_source.event_id, PERIODIC); + break; + + case CLOCK_EVT_MODE_ONESHOT: + break; + + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + break; + + case CLOCK_EVT_MODE_RESUME: + s5p_timer_resume(); + break; + } +} + +static void s5p_timer_resume(void) +{ + /* event timer restart */ + s5p_time_setup(timer_source.event_id, clock_count_per_tick); + s5p_time_start(timer_source.event_id, PERIODIC); + + /* source timer restart */ + s5p_time_setup(timer_source.source_id, TCNT_MAX); + s5p_time_start(timer_source.source_id, PERIODIC); +} + +void __init s5p_set_timer_source(enum s5p_timer_mode event, + enum s5p_timer_mode source) +{ + s3c_device_timer[event].dev.bus = &platform_bus_type; + s3c_device_timer[source].dev.bus = &platform_bus_type; + + timer_source.event_id = event; + timer_source.source_id = source; +} + +static struct clock_event_device time_event_device = { + .name = "s5p_event_timer", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .rating = 200, + .set_next_event = s5p_set_next_event, + .set_mode = s5p_set_mode, +}; + +static irqreturn_t s5p_clock_event_isr(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction s5p_clock_event_irq = { + .name = "s5p_time_irq", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = s5p_clock_event_isr, + .dev_id = &time_event_device, +}; + +static void __init s5p_clockevent_init(void) +{ + unsigned long pclk; + unsigned long clock_rate; + unsigned int irq_number; + struct clk *tscaler; + + pclk = clk_get_rate(timerclk); + + tscaler = clk_get_parent(tdiv_event); + + clk_set_rate(tscaler, pclk / 2); + clk_set_rate(tdiv_event, pclk / 2); + clk_set_parent(tin_event, tdiv_event); + + clock_rate = clk_get_rate(tin_event); + clock_count_per_tick = clock_rate / HZ; + + clockevents_calc_mult_shift(&time_event_device, + clock_rate, S5PTIMER_MIN_RANGE); + time_event_device.max_delta_ns = + clockevent_delta2ns(-1, &time_event_device); + time_event_device.min_delta_ns = + clockevent_delta2ns(1, &time_event_device); + + time_event_device.cpumask = cpumask_of(0); + clockevents_register_device(&time_event_device); + + irq_number = timer_source.event_id + IRQ_TIMER0; + setup_irq(irq_number, &s5p_clock_event_irq); +} + +static cycle_t s5p_timer_read(struct clocksource *cs) +{ + unsigned long offset = 0; + + switch (timer_source.source_id) { + case S5P_PWM0: + case S5P_PWM1: + case S5P_PWM2: + case S5P_PWM3: + offset = (timer_source.source_id * 0x0c) + 0x14; + break; + + case S5P_PWM4: + offset = 0x40; + break; + + default: + printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id); + return 0; + } + + return (cycle_t) ~__raw_readl(S3C_TIMERREG(offset)); +} + +/* + * Override the global weak sched_clock symbol with this + * local implementation which uses the clocksource to get some + * better resolution when scheduling the kernel. We accept that + * this wraps around for now, since it is just a relative time + * stamp. (Inspired by U300 implementation.) + */ +static DEFINE_CLOCK_DATA(cd); + +unsigned long long notrace sched_clock(void) +{ + u32 cyc; + unsigned long offset = 0; + + switch (timer_source.source_id) { + case S5P_PWM0: + case S5P_PWM1: + case S5P_PWM2: + case S5P_PWM3: + offset = (timer_source.source_id * 0x0c) + 0x14; + break; + + case S5P_PWM4: + offset = 0x40; + break; + + default: + printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id); + return 0; + } + + cyc = ~__raw_readl(S3C_TIMERREG(offset)); + return cyc_to_sched_clock(&cd, cyc, (u32)~0); +} + +static void notrace s5p_update_sched_clock(void) +{ + u32 cyc; + unsigned long offset = 0; + + switch (timer_source.source_id) { + case S5P_PWM0: + case S5P_PWM1: + case S5P_PWM2: + case S5P_PWM3: + offset = (timer_source.source_id * 0x0c) + 0x14; + break; + + case S5P_PWM4: + offset = 0x40; + break; + + default: + printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id); + } + + cyc = ~__raw_readl(S3C_TIMERREG(offset)); + update_sched_clock(&cd, cyc, (u32)~0); +} + +struct clocksource time_clocksource = { + .name = "s5p_clocksource_timer", + .rating = 250, + .read = s5p_timer_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void __init s5p_clocksource_init(void) +{ + unsigned long pclk; + unsigned long clock_rate; + + pclk = clk_get_rate(timerclk); + + clk_set_rate(tdiv_source, pclk / 2); + clk_set_parent(tin_source, tdiv_source); + + clock_rate = clk_get_rate(tin_source); + + init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate); + + s5p_time_setup(timer_source.source_id, TCNT_MAX); + s5p_time_start(timer_source.source_id, PERIODIC); + + if (clocksource_register_hz(&time_clocksource, clock_rate)) + panic("%s: can't register clocksource\n", time_clocksource.name); +} + +static void __init s5p_timer_resources(void) +{ + + unsigned long event_id = timer_source.event_id; + unsigned long source_id = timer_source.source_id; + + timerclk = clk_get(NULL, "timers"); + if (IS_ERR(timerclk)) + panic("failed to get timers clock for timer"); + + clk_enable(timerclk); + + tin_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tin"); + if (IS_ERR(tin_event)) + panic("failed to get pwm-tin clock for event timer"); + + tdiv_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tdiv"); + if (IS_ERR(tdiv_event)) + panic("failed to get pwm-tdiv clock for event timer"); + + clk_enable(tin_event); + + tin_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tin"); + if (IS_ERR(tin_source)) + panic("failed to get pwm-tin clock for source timer"); + + tdiv_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tdiv"); + if (IS_ERR(tdiv_source)) + panic("failed to get pwm-tdiv clock for source timer"); + + clk_enable(tin_source); +} + +static void __init s5p_timer_init(void) +{ + s5p_timer_resources(); + s5p_clockevent_init(); + s5p_clocksource_init(); +} + +struct sys_timer s5p_timer = { + .init = s5p_timer_init, +}; diff --git a/arch/arm/plat-s5p/setup-mipiphy.c b/arch/arm/plat-s5p/setup-mipiphy.c new file mode 100644 index 00000000000..683c466c0e6 --- /dev/null +++ b/arch/arm/plat-s5p/setup-mipiphy.c @@ -0,0 +1,63 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * + * S5P - Helper functions for MIPI-CSIS and MIPI-DSIM D-PHY control + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <mach/regs-clock.h> + +static int __s5p_mipi_phy_control(struct platform_device *pdev, + bool on, u32 reset) +{ + static DEFINE_SPINLOCK(lock); + void __iomem *addr; + unsigned long flags; + int pid; + u32 cfg; + + if (!pdev) + return -EINVAL; + + pid = (pdev->id == -1) ? 0 : pdev->id; + + if (pid != 0 && pid != 1) + return -EINVAL; + + addr = S5P_MIPI_DPHY_CONTROL(pid); + + spin_lock_irqsave(&lock, flags); + + cfg = __raw_readl(addr); + cfg = on ? (cfg | reset) : (cfg & ~reset); + __raw_writel(cfg, addr); + + if (on) { + cfg |= S5P_MIPI_DPHY_ENABLE; + } else if (!(cfg & (S5P_MIPI_DPHY_SRESETN | + S5P_MIPI_DPHY_MRESETN) & ~reset)) { + cfg &= ~S5P_MIPI_DPHY_ENABLE; + } + + __raw_writel(cfg, addr); + spin_unlock_irqrestore(&lock, flags); + + return 0; +} + +int s5p_csis_phy_enable(struct platform_device *pdev, bool on) +{ + return __s5p_mipi_phy_control(pdev, on, S5P_MIPI_DPHY_SRESETN); +} + +int s5p_dsim_phy_enable(struct platform_device *pdev, bool on) +{ + return __s5p_mipi_phy_control(pdev, on, S5P_MIPI_DPHY_MRESETN); +} diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c index ffe8a48bc3c..54f5eddc921 100644 --- a/arch/arm/plat-s5p/sysmmu.c +++ b/arch/arm/plat-s5p/sysmmu.c @@ -12,280 +12,266 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <asm/pgtable.h> + #include <mach/map.h> #include <mach/regs-sysmmu.h> -#include <mach/sysmmu.h> +#include <plat/sysmmu.h> + +#define CTRL_ENABLE 0x5 +#define CTRL_BLOCK 0x7 +#define CTRL_DISABLE 0x0 + +static struct device *dev; + +static unsigned short fault_reg_offset[SYSMMU_FAULTS_NUM] = { + S5P_PAGE_FAULT_ADDR, + S5P_AR_FAULT_ADDR, + S5P_AW_FAULT_ADDR, + S5P_DEFAULT_SLAVE_ADDR, + S5P_AR_FAULT_ADDR, + S5P_AR_FAULT_ADDR, + S5P_AW_FAULT_ADDR, + S5P_AW_FAULT_ADDR +}; + +static char *sysmmu_fault_name[SYSMMU_FAULTS_NUM] = { + "PAGE FAULT", + "AR MULTI-HIT FAULT", + "AW MULTI-HIT FAULT", + "BUS ERROR", + "AR SECURITY PROTECTION FAULT", + "AR ACCESS PROTECTION FAULT", + "AW SECURITY PROTECTION FAULT", + "AW ACCESS PROTECTION FAULT" +}; -struct sysmmu_controller s5p_sysmmu_cntlrs[S5P_SYSMMU_TOTAL_IPNUM]; +static int (*fault_handlers[S5P_SYSMMU_TOTAL_IPNUM])( + enum S5P_SYSMMU_INTERRUPT_TYPE itype, + unsigned long pgtable_base, + unsigned long fault_addr); -void s5p_sysmmu_register(struct sysmmu_controller *sysmmuconp) +/* + * If adjacent 2 bits are true, the system MMU is enabled. + * The system MMU is disabled, otherwise. + */ +static unsigned long sysmmu_states; + +static inline void set_sysmmu_active(sysmmu_ips ips) { - unsigned int reg_mmu_ctrl; - unsigned int reg_mmu_status; - unsigned int reg_pt_base_addr; - unsigned int reg_int_status; - unsigned int reg_page_ft_addr; - - reg_int_status = __raw_readl(sysmmuconp->regs + S5P_INT_STATUS); - reg_mmu_ctrl = __raw_readl(sysmmuconp->regs + S5P_MMU_CTRL); - reg_mmu_status = __raw_readl(sysmmuconp->regs + S5P_MMU_STATUS); - reg_pt_base_addr = __raw_readl(sysmmuconp->regs + S5P_PT_BASE_ADDR); - reg_page_ft_addr = __raw_readl(sysmmuconp->regs + S5P_PAGE_FAULT_ADDR); - - printk(KERN_INFO "%s: ips:%s\n", __func__, sysmmuconp->name); - printk(KERN_INFO "%s: MMU_CTRL:0x%X, ", __func__, reg_mmu_ctrl); - printk(KERN_INFO "MMU_STATUS:0x%X, PT_BASE_ADDR:0x%X\n", reg_mmu_status, reg_pt_base_addr); - printk(KERN_INFO "%s: INT_STATUS:0x%X, PAGE_FAULT_ADDR:0x%X\n", __func__, reg_int_status, reg_page_ft_addr); - - switch (reg_int_status & 0xFF) { - case 0x1: - printk(KERN_INFO "%s: Page fault\n", __func__); - printk(KERN_INFO "%s: Virtual address causing last page fault or bus error : 0x%x\n", __func__ , reg_page_ft_addr); - break; - case 0x2: - printk(KERN_INFO "%s: AR multi-hit fault\n", __func__); - break; - case 0x4: - printk(KERN_INFO "%s: AW multi-hit fault\n", __func__); - break; - case 0x8: - printk(KERN_INFO "%s: Bus error\n", __func__); - break; - case 0x10: - printk(KERN_INFO "%s: AR Security protection fault\n", __func__); - break; - case 0x20: - printk(KERN_INFO "%s: AR Access protection fault\n", __func__); - break; - case 0x40: - printk(KERN_INFO "%s: AW Security protection fault\n", __func__); - break; - case 0x80: - printk(KERN_INFO "%s: AW Access protection fault\n", __func__); - break; - } + sysmmu_states |= 3 << (ips * 2); } -static irqreturn_t s5p_sysmmu_irq(int irq, void *dev_id) +static inline void set_sysmmu_inactive(sysmmu_ips ips) { - unsigned int i; - unsigned int reg_int_status; - struct sysmmu_controller *sysmmuconp; - - for (i = 0; i < S5P_SYSMMU_TOTAL_IPNUM; i++) { - sysmmuconp = &s5p_sysmmu_cntlrs[i]; - - if (sysmmuconp->enable == true) { - reg_int_status = __raw_readl(sysmmuconp->regs + S5P_INT_STATUS); - - if (reg_int_status & 0xFF) - s5p_sysmmu_register(sysmmuconp); - } - } - return IRQ_HANDLED; + sysmmu_states &= ~(3 << (ips * 2)); } -int s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd) +static inline int is_sysmmu_active(sysmmu_ips ips) { - struct sysmmu_controller *sysmmuconp = NULL; - - sysmmuconp = &s5p_sysmmu_cntlrs[ips]; - - if (sysmmuconp == NULL) { - printk(KERN_ERR "failed to get ip's sysmmu info\n"); - return 1; - } - - /* Set sysmmu page table base address */ - __raw_writel(pgd, sysmmuconp->regs + S5P_PT_BASE_ADDR); + return sysmmu_states & (3 << (ips * 2)); +} - if (s5p_sysmmu_tlb_invalidate(ips) != 0) - printk(KERN_ERR "failed s5p_sysmmu_tlb_invalidate\n"); +static void __iomem *sysmmusfrs[S5P_SYSMMU_TOTAL_IPNUM]; - return 0; +static inline void sysmmu_block(sysmmu_ips ips) +{ + __raw_writel(CTRL_BLOCK, sysmmusfrs[ips] + S5P_MMU_CTRL); + dev_dbg(dev, "%s is blocked.\n", sysmmu_ips_name[ips]); } -static int s5p_sysmmu_set_tablebase(sysmmu_ips ips) +static inline void sysmmu_unblock(sysmmu_ips ips) { - unsigned int pg; - struct sysmmu_controller *sysmmuconp; + __raw_writel(CTRL_ENABLE, sysmmusfrs[ips] + S5P_MMU_CTRL); + dev_dbg(dev, "%s is unblocked.\n", sysmmu_ips_name[ips]); +} - sysmmuconp = &s5p_sysmmu_cntlrs[ips]; +static inline void __sysmmu_tlb_invalidate(sysmmu_ips ips) +{ + __raw_writel(0x1, sysmmusfrs[ips] + S5P_MMU_FLUSH); + dev_dbg(dev, "TLB of %s is invalidated.\n", sysmmu_ips_name[ips]); +} - if (sysmmuconp == NULL) { - printk(KERN_ERR "failed to get ip's sysmmu info\n"); - return 1; +static inline void __sysmmu_set_ptbase(sysmmu_ips ips, unsigned long pgd) +{ + if (unlikely(pgd == 0)) { + pgd = (unsigned long)ZERO_PAGE(0); + __raw_writel(0x20, sysmmusfrs[ips] + S5P_MMU_CFG); /* 4KB LV1 */ + } else { + __raw_writel(0x0, sysmmusfrs[ips] + S5P_MMU_CFG); /* 16KB LV1 */ } - __asm__("mrc p15, 0, %0, c2, c0, 0" \ - : "=r" (pg) : : "cc"); \ - pg &= ~0x3fff; + __raw_writel(pgd, sysmmusfrs[ips] + S5P_PT_BASE_ADDR); - printk(KERN_INFO "%s: CP15 TTBR0 : 0x%x\n", __func__, pg); - - /* Set sysmmu page table base address */ - __raw_writel(pg, sysmmuconp->regs + S5P_PT_BASE_ADDR); + dev_dbg(dev, "Page table base of %s is initialized with 0x%08lX.\n", + sysmmu_ips_name[ips], pgd); + __sysmmu_tlb_invalidate(ips); +} - return 0; +void sysmmu_set_fault_handler(sysmmu_ips ips, + int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype, + unsigned long pgtable_base, + unsigned long fault_addr)) +{ + BUG_ON(!((ips >= SYSMMU_MDMA) && (ips < S5P_SYSMMU_TOTAL_IPNUM))); + fault_handlers[ips] = handler; } -int s5p_sysmmu_enable(sysmmu_ips ips) +static irqreturn_t s5p_sysmmu_irq(int irq, void *dev_id) { - unsigned int reg; + /* SYSMMU is in blocked when interrupt occurred. */ + unsigned long base = 0; + sysmmu_ips ips = (sysmmu_ips)dev_id; + enum S5P_SYSMMU_INTERRUPT_TYPE itype; - struct sysmmu_controller *sysmmuconp; + itype = (enum S5P_SYSMMU_INTERRUPT_TYPE) + __ffs(__raw_readl(sysmmusfrs[ips] + S5P_INT_STATUS)); - sysmmuconp = &s5p_sysmmu_cntlrs[ips]; + BUG_ON(!((itype >= 0) && (itype < 8))); - if (sysmmuconp == NULL) { - printk(KERN_ERR "failed to get ip's sysmmu info\n"); - return 1; - } + dev_alert(dev, "%s occurred by %s.\n", sysmmu_fault_name[itype], + sysmmu_ips_name[ips]); - s5p_sysmmu_set_tablebase(ips); + if (fault_handlers[ips]) { + unsigned long addr; - /* replacement policy : LRU */ - reg = __raw_readl(sysmmuconp->regs + S5P_MMU_CFG); - reg |= 0x1; - __raw_writel(reg, sysmmuconp->regs + S5P_MMU_CFG); + base = __raw_readl(sysmmusfrs[ips] + S5P_PT_BASE_ADDR); + addr = __raw_readl(sysmmusfrs[ips] + fault_reg_offset[itype]); - /* Enable interrupt, Enable MMU */ - reg = __raw_readl(sysmmuconp->regs + S5P_MMU_CTRL); - reg |= (0x1 << 2) | (0x1 << 0); + if (fault_handlers[ips](itype, base, addr)) { + __raw_writel(1 << itype, + sysmmusfrs[ips] + S5P_INT_CLEAR); + dev_notice(dev, "%s from %s is resolved." + " Retrying translation.\n", + sysmmu_fault_name[itype], sysmmu_ips_name[ips]); + } else { + base = 0; + } + } - __raw_writel(reg, sysmmuconp->regs + S5P_MMU_CTRL); + sysmmu_unblock(ips); - sysmmuconp->enable = true; + if (!base) + dev_notice(dev, "%s from %s is not handled.\n", + sysmmu_fault_name[itype], sysmmu_ips_name[ips]); - return 0; + return IRQ_HANDLED; } -int s5p_sysmmu_disable(sysmmu_ips ips) +void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd) { - unsigned int reg; - - struct sysmmu_controller *sysmmuconp = NULL; - - if (ips > S5P_SYSMMU_TOTAL_IPNUM) - printk(KERN_ERR "failed to get ips parameter\n"); - - sysmmuconp = &s5p_sysmmu_cntlrs[ips]; - - if (sysmmuconp == NULL) { - printk(KERN_ERR "failed to get ip's sysmmu info\n"); - return 1; + if (is_sysmmu_active(ips)) { + sysmmu_block(ips); + __sysmmu_set_ptbase(ips, pgd); + sysmmu_unblock(ips); + } else { + dev_dbg(dev, "%s is disabled. " + "Skipping initializing page table base.\n", + sysmmu_ips_name[ips]); } +} - reg = __raw_readl(sysmmuconp->regs + S5P_MMU_CFG); - - /* replacement policy : LRU */ - reg |= 0x1; - __raw_writel(reg, sysmmuconp->regs + S5P_MMU_CFG); - - reg = __raw_readl(sysmmuconp->regs + S5P_MMU_CTRL); +void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd) +{ + if (!is_sysmmu_active(ips)) { + sysmmu_clk_enable(ips); - /* Disable MMU */ - reg &= ~0x1; - __raw_writel(reg, sysmmuconp->regs + S5P_MMU_CTRL); + __sysmmu_set_ptbase(ips, pgd); - sysmmuconp->enable = false; + __raw_writel(CTRL_ENABLE, sysmmusfrs[ips] + S5P_MMU_CTRL); - return 0; + set_sysmmu_active(ips); + dev_dbg(dev, "%s is enabled.\n", sysmmu_ips_name[ips]); + } else { + dev_dbg(dev, "%s is already enabled.\n", sysmmu_ips_name[ips]); + } } -int s5p_sysmmu_tlb_invalidate(sysmmu_ips ips) +void s5p_sysmmu_disable(sysmmu_ips ips) { - unsigned int reg; - struct sysmmu_controller *sysmmuconp = NULL; - - sysmmuconp = &s5p_sysmmu_cntlrs[ips]; - - if (sysmmuconp == NULL) { - printk(KERN_ERR "failed to get ip's sysmmu info\n"); - return 1; + if (is_sysmmu_active(ips)) { + __raw_writel(CTRL_DISABLE, sysmmusfrs[ips] + S5P_MMU_CTRL); + set_sysmmu_inactive(ips); + sysmmu_clk_disable(ips); + dev_dbg(dev, "%s is disabled.\n", sysmmu_ips_name[ips]); + } else { + dev_dbg(dev, "%s is already disabled.\n", sysmmu_ips_name[ips]); } +} - /* set Block MMU for flush TLB */ - reg = __raw_readl(sysmmuconp->regs + S5P_MMU_CTRL); - reg |= 0x1 << 1; - __raw_writel(reg, sysmmuconp->regs + S5P_MMU_CTRL); - - /* flush all TLB entry */ - __raw_writel(0x1, sysmmuconp->regs + S5P_MMU_FLUSH); - - /* set Un-block MMU after flush TLB */ - reg = __raw_readl(sysmmuconp->regs + S5P_MMU_CTRL); - reg &= ~(0x1 << 1); - __raw_writel(reg, sysmmuconp->regs + S5P_MMU_CTRL); - - return 0; +void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips) +{ + if (is_sysmmu_active(ips)) { + sysmmu_block(ips); + __sysmmu_tlb_invalidate(ips); + sysmmu_unblock(ips); + } else { + dev_dbg(dev, "%s is disabled. " + "Skipping invalidating TLB.\n", sysmmu_ips_name[ips]); + } } static int s5p_sysmmu_probe(struct platform_device *pdev) { - int i; - int ret; - struct resource *res; - struct sysmmu_controller *sysmmuconp; - sysmmu_ips ips; + int i, ret; + struct resource *res, *mem; + + dev = &pdev->dev; for (i = 0; i < S5P_SYSMMU_TOTAL_IPNUM; i++) { - sysmmuconp = &s5p_sysmmu_cntlrs[i]; - if (sysmmuconp == NULL) { - printk(KERN_ERR "failed to get ip's sysmmu info\n"); - ret = -ENOENT; - goto err_res; - } + int irq; - sysmmuconp->name = sysmmu_ips_name[i]; + sysmmu_clk_init(dev, i); + sysmmu_clk_disable(i); res = platform_get_resource(pdev, IORESOURCE_MEM, i); if (!res) { - printk(KERN_ERR "failed to get sysmmu resource\n"); + dev_err(dev, "Failed to get the resource of %s.\n", + sysmmu_ips_name[i]); ret = -ENODEV; goto err_res; } - sysmmuconp->mem = request_mem_region(res->start, + mem = request_mem_region(res->start, ((res->end) - (res->start)) + 1, pdev->name); - if (!sysmmuconp->mem) { - pr_err("failed to request sysmmu memory region\n"); + if (!mem) { + dev_err(dev, "Failed to request the memory region of %s.\n", + sysmmu_ips_name[i]); ret = -EBUSY; goto err_res; } - sysmmuconp->regs = ioremap(res->start, res->end - res->start + 1); - if (!sysmmuconp->regs) { - pr_err("failed to sysmmu ioremap\n"); + sysmmusfrs[i] = ioremap(res->start, res->end - res->start + 1); + if (!sysmmusfrs[i]) { + dev_err(dev, "Failed to ioremap() for %s.\n", + sysmmu_ips_name[i]); ret = -ENXIO; goto err_reg; } - sysmmuconp->irq = platform_get_irq(pdev, i); - if (sysmmuconp->irq <= 0) { - pr_err("failed to get sysmmu irq resource\n"); + irq = platform_get_irq(pdev, i); + if (irq <= 0) { + dev_err(dev, "Failed to get the IRQ resource of %s.\n", + sysmmu_ips_name[i]); ret = -ENOENT; goto err_map; } - ret = request_irq(sysmmuconp->irq, s5p_sysmmu_irq, IRQF_DISABLED, pdev->name, sysmmuconp); - if (ret) { - pr_err("failed to request irq\n"); + if (request_irq(irq, s5p_sysmmu_irq, IRQF_DISABLED, + pdev->name, (void *)i)) { + dev_err(dev, "Failed to request IRQ for %s.\n", + sysmmu_ips_name[i]); ret = -ENOENT; goto err_map; } - - ips = (sysmmu_ips)i; - - sysmmuconp->ips = ips; } return 0; -err_reg: - release_mem_region((resource_size_t)sysmmuconp->mem, (resource_size_t)((res->end) - (res->start) + 1)); err_map: - iounmap(sysmmuconp->regs); + iounmap(sysmmusfrs[i]); +err_reg: + release_mem_region(mem->start, resource_size(mem)); err_res: return ret; } diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 32be05cf82a..be72100b81b 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -273,6 +273,19 @@ config SAMSUNG_DEV_KEYPAD help Compile in platform device definitions for keypad +config SAMSUNG_DEV_PWM + bool + default y if ARCH_S3C2410 + help + Compile in platform device definition for PWM Timer + +config S3C24XX_PWM + bool "PWM device support" + select HAVE_PWM + help + Support for exporting the PWM timer blocks via the pwm device + system + # DMA config S3C_DMA diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 29932f88a8d..e9de58a2e29 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -59,6 +59,7 @@ obj-$(CONFIG_SAMSUNG_DEV_ADC) += dev-adc.o obj-$(CONFIG_SAMSUNG_DEV_IDE) += dev-ide.o obj-$(CONFIG_SAMSUNG_DEV_TS) += dev-ts.o obj-$(CONFIG_SAMSUNG_DEV_KEYPAD) += dev-keypad.o +obj-$(CONFIG_SAMSUNG_DEV_PWM) += dev-pwm.o # DMA support diff --git a/arch/arm/plat-samsung/dev-pwm.c b/arch/arm/plat-samsung/dev-pwm.c new file mode 100644 index 00000000000..dab47b0e190 --- /dev/null +++ b/arch/arm/plat-samsung/dev-pwm.c @@ -0,0 +1,53 @@ +/* linux/arch/arm/plat-samsung/dev-pwm.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright (c) 2007 Ben Dooks + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org> + * + * S3C series device definition for the PWM timer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> + +#include <plat/devs.h> + +#define TIMER_RESOURCE_SIZE (1) + +#define TIMER_RESOURCE(_tmr, _irq) \ + (struct resource [TIMER_RESOURCE_SIZE]) { \ + [0] = { \ + .start = _irq, \ + .end = _irq, \ + .flags = IORESOURCE_IRQ \ + } \ + } + +#define DEFINE_S3C_TIMER(_tmr_no, _irq) \ + .name = "s3c24xx-pwm", \ + .id = _tmr_no, \ + .num_resources = TIMER_RESOURCE_SIZE, \ + .resource = TIMER_RESOURCE(_tmr_no, _irq), \ + +/* + * since we already have an static mapping for the timer, + * we do not bother setting any IO resource for the base. + */ + +struct platform_device s3c_device_timer[] = { + [0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) }, + [1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) }, + [2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) }, + [3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) }, + [4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) }, +}; +EXPORT_SYMBOL(s3c_device_timer); diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 9addb3dfb4b..cedfff51c82 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -82,6 +82,7 @@ extern struct sysdev_class s3c64xx_sysclass; extern struct sysdev_class s5p64x0_sysclass; extern struct sysdev_class s5p6442_sysclass; extern struct sysdev_class s5pv210_sysclass; +extern struct sysdev_class exynos4_sysclass; extern void (*s5pc1xx_idle)(void); diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index b4d208b4295..f0da6b70fba 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -1,5 +1,8 @@ /* arch/arm/plat-samsung/include/plat/devs.h * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * * Copyright (c) 2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * @@ -96,15 +99,16 @@ extern struct platform_device s5pv210_device_iis1; extern struct platform_device s5pv210_device_iis2; extern struct platform_device s5pv210_device_spdif; -extern struct platform_device s5pv310_device_ac97; -extern struct platform_device s5pv310_device_pcm0; -extern struct platform_device s5pv310_device_pcm1; -extern struct platform_device s5pv310_device_pcm2; -extern struct platform_device s5pv310_device_i2s0; -extern struct platform_device s5pv310_device_i2s1; -extern struct platform_device s5pv310_device_i2s2; -extern struct platform_device s5pv310_device_spdif; -extern struct platform_device s5pv310_device_pd[]; +extern struct platform_device exynos4_device_ac97; +extern struct platform_device exynos4_device_pcm0; +extern struct platform_device exynos4_device_pcm1; +extern struct platform_device exynos4_device_pcm2; +extern struct platform_device exynos4_device_i2s0; +extern struct platform_device exynos4_device_i2s1; +extern struct platform_device exynos4_device_i2s2; +extern struct platform_device exynos4_device_spdif; +extern struct platform_device exynos4_device_pd[]; +extern struct platform_device exynos4_device_ahci; extern struct platform_device s5p6442_device_pcm0; extern struct platform_device s5p6442_device_pcm1; @@ -133,11 +137,12 @@ extern struct platform_device samsung_device_keypad; extern struct platform_device s5p_device_fimc0; extern struct platform_device s5p_device_fimc1; extern struct platform_device s5p_device_fimc2; +extern struct platform_device s5p_device_fimc3; extern struct platform_device s5p_device_mipi_csis0; extern struct platform_device s5p_device_mipi_csis1; -extern struct platform_device s5pv310_device_sysmmu; +extern struct platform_device exynos4_device_sysmmu; /* s3c2440 specific devices */ diff --git a/arch/arm/plat-samsung/include/plat/fimc-core.h b/arch/arm/plat-samsung/include/plat/fimc-core.h index 81a3bfeecca..945a99d5956 100644 --- a/arch/arm/plat-samsung/include/plat/fimc-core.h +++ b/arch/arm/plat-samsung/include/plat/fimc-core.h @@ -38,6 +38,11 @@ static inline void s3c_fimc_setname(int id, char *name) s5p_device_fimc2.name = name; break; #endif +#ifdef CONFIG_S5P_DEV_FIMC3 + case 3: + s5p_device_fimc3.name = name; + break; +#endif } } diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index e4b5cf126fa..5e04fa6eda7 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -225,4 +225,20 @@ extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr); */ extern int s5p_register_gpio_interrupt(int pin); +/** s5p_register_gpioint_bank() - add gpio bank for further gpio interrupt + * registration (see s5p_register_gpio_interrupt function) + * @chain_irq: chained irq number for the gpio int handler for this bank + * @start: start gpio group number of this bank + * @nr_groups: number of gpio groups handled by this bank + * + * This functions registers initial information about gpio banks that + * can be later used by the s5p_register_gpio_interrupt() function to + * enable support for gpio interrupt for particular gpio group. + */ +#ifdef CONFIG_S5P_GPIO_INT +extern int s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups); +#else +#define s5p_register_gpioint_bank(chain_irq, start, nr_groups) do { } while (0) +#endif + #endif /* __PLAT_GPIO_CFG_H */ diff --git a/arch/arm/plat-samsung/include/plat/pd.h b/arch/arm/plat-samsung/include/plat/pd.h index 5f0ad85783d..abb4bc32716 100644 --- a/arch/arm/plat-samsung/include/plat/pd.h +++ b/arch/arm/plat-samsung/include/plat/pd.h @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-samsung/include/plat/pd.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify @@ -17,7 +17,7 @@ struct samsung_pd_info { void __iomem *base; }; -enum s5pv310_pd_block { +enum exynos4_pd_block { PD_MFC, PD_G3D, PD_LCD0, diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 5a41a0b69ee..b0bdf16549d 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -1,4 +1,7 @@ -/* linux/arch/arm/plat-s3c/include/plat/sdhci.h +/* linux/arch/arm/plat-samsung/include/plat/sdhci.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics @@ -119,10 +122,10 @@ extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w); -extern void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *, int w); -extern void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *, int w); -extern void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *, int w); -extern void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *, int w); +extern void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *, int w); +extern void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *, int w); +extern void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *, int w); +extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w); /* S3C2416 SDHCI setup */ @@ -334,57 +337,57 @@ static inline void s5pv210_default_sdhci3(void) { } #endif /* CONFIG_S5PV210_SETUP_SDHCI */ -/* S5PV310 SDHCI setup */ -#ifdef CONFIG_S5PV310_SETUP_SDHCI -extern char *s5pv310_hsmmc_clksrcs[4]; +/* EXYNOS4 SDHCI setup */ +#ifdef CONFIG_EXYNOS4_SETUP_SDHCI +extern char *exynos4_hsmmc_clksrcs[4]; -extern void s5pv310_setup_sdhci_cfg_card(struct platform_device *dev, +extern void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r, struct mmc_ios *ios, struct mmc_card *card); -static inline void s5pv310_default_sdhci0(void) +static inline void exynos4_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC - s3c_hsmmc0_def_platdata.clocks = s5pv310_hsmmc_clksrcs; - s3c_hsmmc0_def_platdata.cfg_gpio = s5pv310_setup_sdhci0_cfg_gpio; - s3c_hsmmc0_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card; + s3c_hsmmc0_def_platdata.clocks = exynos4_hsmmc_clksrcs; + s3c_hsmmc0_def_platdata.cfg_gpio = exynos4_setup_sdhci0_cfg_gpio; + s3c_hsmmc0_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } -static inline void s5pv310_default_sdhci1(void) +static inline void exynos4_default_sdhci1(void) { #ifdef CONFIG_S3C_DEV_HSMMC1 - s3c_hsmmc1_def_platdata.clocks = s5pv310_hsmmc_clksrcs; - s3c_hsmmc1_def_platdata.cfg_gpio = s5pv310_setup_sdhci1_cfg_gpio; - s3c_hsmmc1_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card; + s3c_hsmmc1_def_platdata.clocks = exynos4_hsmmc_clksrcs; + s3c_hsmmc1_def_platdata.cfg_gpio = exynos4_setup_sdhci1_cfg_gpio; + s3c_hsmmc1_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } -static inline void s5pv310_default_sdhci2(void) +static inline void exynos4_default_sdhci2(void) { #ifdef CONFIG_S3C_DEV_HSMMC2 - s3c_hsmmc2_def_platdata.clocks = s5pv310_hsmmc_clksrcs; - s3c_hsmmc2_def_platdata.cfg_gpio = s5pv310_setup_sdhci2_cfg_gpio; - s3c_hsmmc2_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card; + s3c_hsmmc2_def_platdata.clocks = exynos4_hsmmc_clksrcs; + s3c_hsmmc2_def_platdata.cfg_gpio = exynos4_setup_sdhci2_cfg_gpio; + s3c_hsmmc2_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } -static inline void s5pv310_default_sdhci3(void) +static inline void exynos4_default_sdhci3(void) { #ifdef CONFIG_S3C_DEV_HSMMC3 - s3c_hsmmc3_def_platdata.clocks = s5pv310_hsmmc_clksrcs; - s3c_hsmmc3_def_platdata.cfg_gpio = s5pv310_setup_sdhci3_cfg_gpio; - s3c_hsmmc3_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card; + s3c_hsmmc3_def_platdata.clocks = exynos4_hsmmc_clksrcs; + s3c_hsmmc3_def_platdata.cfg_gpio = exynos4_setup_sdhci3_cfg_gpio; + s3c_hsmmc3_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } #else -static inline void s5pv310_default_sdhci0(void) { } -static inline void s5pv310_default_sdhci1(void) { } -static inline void s5pv310_default_sdhci2(void) { } -static inline void s5pv310_default_sdhci3(void) { } +static inline void exynos4_default_sdhci0(void) { } +static inline void exynos4_default_sdhci1(void) { } +static inline void exynos4_default_sdhci2(void) { } +static inline void exynos4_default_sdhci3(void) { } -#endif /* CONFIG_S5PV310_SETUP_SDHCI */ +#endif /* CONFIG_EXYNOS4_SETUP_SDHCI */ #endif /* __PLAT_S3C_SDHCI_H */ diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c index 2eeb49fa056..f37457c5206 100644 --- a/arch/arm/plat-samsung/pwm.c +++ b/arch/arm/plat-samsung/pwm.c @@ -20,10 +20,8 @@ #include <linux/io.h> #include <linux/pwm.h> -#include <mach/irqs.h> #include <mach/map.h> -#include <plat/devs.h> #include <plat/regs-timer.h> struct pwm_device { @@ -47,37 +45,6 @@ struct pwm_device { static struct clk *clk_scaler[2]; -/* Standard setup for a timer block. */ - -#define TIMER_RESOURCE_SIZE (1) - -#define TIMER_RESOURCE(_tmr, _irq) \ - (struct resource [TIMER_RESOURCE_SIZE]) { \ - [0] = { \ - .start = _irq, \ - .end = _irq, \ - .flags = IORESOURCE_IRQ \ - } \ - } - -#define DEFINE_S3C_TIMER(_tmr_no, _irq) \ - .name = "s3c24xx-pwm", \ - .id = _tmr_no, \ - .num_resources = TIMER_RESOURCE_SIZE, \ - .resource = TIMER_RESOURCE(_tmr_no, _irq), \ - -/* since we already have an static mapping for the timer, we do not - * bother setting any IO resource for the base. - */ - -struct platform_device s3c_device_timer[] = { - [0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) }, - [1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) }, - [2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) }, - [3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) }, - [4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) }, -}; - static inline int pwm_is_tdiv(struct pwm_device *pwm) { return clk_get_parent(pwm->clk) == pwm->clk_div; |