diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/x86_64/kernel/apic.c | 38 | ||||
| -rw-r--r-- | arch/x86_64/kernel/io_apic.c | 36 |
2 files changed, 71 insertions, 3 deletions
diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c index 2a6c893ccf6..375d369570c 100644 --- a/arch/x86_64/kernel/apic.c +++ b/arch/x86_64/kernel/apic.c @@ -133,7 +133,7 @@ void __init connect_bsp_APIC(void) } } -void disconnect_bsp_APIC(void) +void disconnect_bsp_APIC(int virt_wire_setup) { if (pic_mode) { /* @@ -146,6 +146,42 @@ void disconnect_bsp_APIC(void) outb(0x70, 0x22); outb(0x00, 0x23); } + else { + /* Go back to Virtual Wire compatibility mode */ + unsigned long value; + + /* For the spurious interrupt use vector F, and enable it */ + value = apic_read(APIC_SPIV); + value &= ~APIC_VECTOR_MASK; + value |= APIC_SPIV_APIC_ENABLED; + value |= 0xf; + apic_write_around(APIC_SPIV, value); + + if (!virt_wire_setup) { + /* For LVT0 make it edge triggered, active high, external and enabled */ + value = apic_read(APIC_LVT0); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED ); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); + apic_write_around(APIC_LVT0, value); + } + else { + /* Disable LVT0 */ + apic_write_around(APIC_LVT0, APIC_LVT_MASKED); + } + + /* For LVT1 make it edge triggered, active high, nmi and enabled */ + value = apic_read(APIC_LVT1); + value &= ~( + APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); + apic_write_around(APIC_LVT1, value); + } } void disable_local_APIC(void) diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index afd87e64d0a..157190d986b 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -330,7 +330,7 @@ static int find_irq_entry(int apic, int pin, int type) /* * Find the pin to which IRQ[irq] (ISA) is connected */ -static int __init find_isa_irq_pin(int irq, int type) +static int find_isa_irq_pin(int irq, int type) { int i; @@ -1132,12 +1132,44 @@ static void __init enable_IO_APIC(void) */ void disable_IO_APIC(void) { + int pin; /* * Clear the IO-APIC before rebooting: */ clear_IO_APIC(); - disconnect_bsp_APIC(); + /* + * If the i82559 is routed through an IOAPIC + * Put that IOAPIC in virtual wire mode + * so legacy interrups can be delivered. + */ + pin = find_isa_irq_pin(0, mp_ExtINT); + if (pin != -1) { + struct IO_APIC_route_entry entry; + unsigned long flags; + + memset(&entry, 0, sizeof(entry)); + entry.mask = 0; /* Enabled */ + entry.trigger = 0; /* Edge */ + entry.irr = 0; + entry.polarity = 0; /* High */ + entry.delivery_status = 0; + entry.dest_mode = 0; /* Physical */ + entry.delivery_mode = 7; /* ExtInt */ + entry.vector = 0; + entry.dest.physical.physical_dest = 0; + + + /* + * Add it to the IO-APIC irq-routing table: + */ + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1)); + io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0)); + spin_unlock_irqrestore(&ioapic_lock, flags); + } + + disconnect_bsp_APIC(pin != -1); } /* |