summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/alpha/include/asm/percpu.h6
-rw-r--r--arch/arm/Kconfig.debug8
-rw-r--r--arch/arm/configs/s3c2410_defconfig2
-rw-r--r--arch/arm/configs/s3c6400_defconfig1
-rw-r--r--arch/arm/configs/tct_hammer_defconfig1
-rw-r--r--arch/arm/include/asm/page.h2
-rw-r--r--arch/arm/kernel/irq.c24
-rw-r--r--arch/arm/kernel/vmlinux.lds.S15
-rw-r--r--arch/arm/mach-at91/board-sam9g20ek.c54
-rw-r--r--arch/arm/mach-at91/board-sam9rlek.c6
-rw-r--r--arch/arm/mach-omap1/board-nokia770.c3
-rw-r--r--arch/arm/mach-omap1/mailbox.c2
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c1
-rw-r--r--arch/arm/mach-omap2/gpmc-onenand.c21
-rw-r--r--arch/arm/mach-omap2/id.c22
-rw-r--r--arch/arm/mach-omap2/mailbox.c6
-rw-r--r--arch/arm/mach-omap2/mmc-twl4030.c13
-rw-r--r--arch/arm/mach-s3c2440/mach-mini2440.c3
-rw-r--r--arch/arm/mach-s3c2442/mach-gta02.c3
-rw-r--r--arch/arm/plat-omap/dma.c13
-rw-r--r--arch/arm/plat-omap/gpio.c1
-rw-r--r--arch/arm/plat-omap/include/mach/cpu.h22
-rw-r--r--arch/arm/plat-omap/include/mach/dma.h15
-rw-r--r--arch/arm/plat-omap/include/mach/io.h2
-rw-r--r--arch/arm/plat-omap/iommu.c2
-rw-r--r--arch/arm/plat-omap/sram.c7
-rw-r--r--arch/arm/plat-s3c/Makefile2
-rw-r--r--arch/arm/plat-s3c/include/plat/devs.h1
-rw-r--r--arch/arm/plat-s3c24xx/Makefile2
-rw-r--r--arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c3
-rw-r--r--arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c3
-rw-r--r--arch/frv/Kconfig1
-rw-r--r--arch/frv/include/asm/atomic.h68
-rw-r--r--arch/frv/include/asm/perf_counter.h17
-rw-r--r--arch/frv/include/asm/system.h2
-rw-r--r--arch/frv/include/asm/unistd.h4
-rw-r--r--arch/frv/kernel/entry.S2
-rw-r--r--arch/frv/kernel/frv_ksyms.c4
-rw-r--r--arch/frv/lib/Makefile4
-rw-r--r--arch/frv/lib/atomic-ops.S3
-rw-r--r--arch/frv/lib/atomic64-ops.S162
-rw-r--r--arch/frv/lib/perf_counter.c19
-rw-r--r--arch/ia64/kernel/esi.c2
-rw-r--r--arch/ia64/kernel/perfmon.c2
-rw-r--r--arch/ia64/kernel/salinfo.c2
-rw-r--r--arch/ia64/kvm/kvm_lib.c6
-rw-r--r--arch/ia64/kvm/process.c6
-rw-r--r--arch/ia64/kvm/vcpu.c2
-rw-r--r--arch/ia64/kvm/vtlb.c4
-rw-r--r--arch/ia64/sn/kernel/io_common.c3
-rw-r--r--arch/mn10300/include/asm/unistd.h4
-rw-r--r--arch/mn10300/kernel/entry.S2
-rw-r--r--arch/powerpc/include/asm/perf_counter.h2
-rw-r--r--arch/s390/include/asm/kvm_host.h4
-rw-r--r--arch/s390/kvm/kvm-s390.c23
-rw-r--r--arch/s390/kvm/priv.c2
-rw-r--r--arch/sh/Kconfig.debug4
-rw-r--r--arch/sh/boards/mach-se/7206/io.c2
-rw-r--r--arch/sh/boards/mach-se/7724/setup.c110
-rw-r--r--arch/sh/configs/migor_defconfig53
-rw-r--r--arch/sh/configs/se7724_defconfig25
-rw-r--r--arch/sh/include/asm/perf_counter.h2
-rw-r--r--arch/sh/include/asm/syscall_32.h1
-rw-r--r--arch/sh/include/mach-se/mach/se7724.h5
-rw-r--r--arch/sh/mm/fault_32.c61
-rw-r--r--arch/sh/mm/tlbflush_64.c15
-rw-r--r--arch/x86/Kconfig15
-rw-r--r--arch/x86/include/asm/boot.h6
-rw-r--r--arch/x86/include/asm/pci.h2
-rw-r--r--arch/x86/include/asm/percpu.h10
-rw-r--r--arch/x86/include/asm/perf_counter.h3
-rw-r--r--arch/x86/include/asm/proto.h11
-rw-r--r--arch/x86/kernel/cpu/amd.c4
-rw-r--r--arch/x86/kernel/cpu/common.c3
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce.c4
-rw-r--r--arch/x86/kernel/cpu/perf_counter.c22
-rw-r--r--arch/x86/kernel/dumpstack.c1
-rw-r--r--arch/x86/kernel/e820.c16
-rw-r--r--arch/x86/kernel/pci-dma.c2
-rw-r--r--arch/x86/kernel/setup.c16
-rw-r--r--arch/x86/kernel/setup_percpu.c219
-rw-r--r--arch/x86/kernel/tlb_uv.c9
-rw-r--r--arch/x86/kernel/traps.c3
-rw-r--r--arch/x86/kvm/mmu.c6
-rw-r--r--arch/x86/kvm/paging_tmpl.h2
-rw-r--r--arch/x86/kvm/vmx.c15
-rw-r--r--arch/x86/kvm/x86.c1
-rw-r--r--arch/x86/kvm/x86_emulate.c2
-rw-r--r--arch/x86/lib/delay.c3
-rw-r--r--arch/x86/mm/init.c17
-rw-r--r--arch/x86/mm/init_64.c2
-rw-r--r--arch/x86/mm/pageattr.c65
-rw-r--r--arch/x86/power/cpu.c2
93 files changed, 1056 insertions, 299 deletions
diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index 06c5c7a4afd..b663f1f10b6 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -30,7 +30,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
#ifndef MODULE
#define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset))
-#define PER_CPU_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
#else
/*
* To calculate addresses of locally defined variables, GCC uses 32-bit
@@ -49,7 +49,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
: "=&r"(__ptr), "=&r"(tmp_gp)); \
(typeof(&per_cpu_var(var)))(__ptr + (offset)); })
-#define PER_CPU_ATTRIBUTES __used
+#define PER_CPU_DEF_ATTRIBUTES __used
#endif /* MODULE */
@@ -71,7 +71,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
#define __get_cpu_var(var) per_cpu_var(var)
#define __raw_get_cpu_var(var) per_cpu_var(var)
-#define PER_CPU_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
#endif /* SMP */
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a71fd941ade..a89e4734b8f 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -99,14 +99,6 @@ config DEBUG_CLPS711X_UART2
output to the second serial port on these devices. Saying N will
cause the debug messages to appear on the first serial port.
-config DEBUG_S3C_PORT
- depends on DEBUG_LL && PLAT_S3C
- bool "Kernel low-level debugging messages via S3C UART"
- help
- Say Y here if you want debug print routines to go to one of the
- S3C internal UARTs. The chosen UART must have been configured
- before it is used.
-
config DEBUG_S3C_UART
depends on PLAT_S3C
int "S3C UART to use for low-level debug"
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 2d58b8fe59b..b49810461e4 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -260,6 +260,7 @@ CONFIG_MACH_NEXCODER_2440=y
CONFIG_SMDK2440_CPU2440=y
CONFIG_MACH_AT2440EVB=y
CONFIG_CPU_S3C2442=y
+CONFIG_MACH_MINI2440=y
#
# S3C2442 Machines
@@ -2298,7 +2299,6 @@ CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
CONFIG_DEBUG_S3C_UART=0
#
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index 2e8fa50e9a0..32860609e05 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -816,7 +816,6 @@ CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
CONFIG_DEBUG_S3C_UART=0
#
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index 07dfb98df4f..9d32faef05f 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -857,7 +857,6 @@ CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_S3C_PORT is not set
CONFIG_DEBUG_S3C_UART=0
#
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index be962c1349c..9c746af1bf6 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -12,7 +12,7 @@
/* PAGE_SHIFT determines the page size */
#define PAGE_SHIFT 12
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
#ifndef __ASSEMBLY__
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 096f600dc8d..b7c3490eaa2 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -98,17 +98,6 @@ unlock:
return 0;
}
-/* Handle bad interrupts */
-static struct irq_desc bad_irq_desc = {
- .handle_irq = handle_bad_irq,
- .lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
-};
-
-#ifdef CONFIG_CPUMASK_OFFSTACK
-/* We are not allocating bad_irq_desc.affinity or .pending_mask */
-#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK."
-#endif
-
/*
* do_IRQ handles all hardware IRQ's. Decoded IRQs should not
* come via this function. Instead, they should provide their
@@ -124,10 +113,13 @@ asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
* Some hardware gives randomly wrong interrupts. Rather
* than crashing, do something sensible.
*/
- if (irq >= NR_IRQS)
- handle_bad_irq(irq, &bad_irq_desc);
- else
+ if (unlikely(irq >= NR_IRQS)) {
+ if (printk_ratelimit())
+ printk(KERN_WARNING "Bad IRQ%u\n", irq);
+ ack_bad_irq(irq);
+ } else {
generic_handle_irq(irq);
+ }
/* AT91 specific workaround */
irq_finish(irq);
@@ -165,10 +157,6 @@ void __init init_IRQ(void)
for (irq = 0; irq < NR_IRQS; irq++)
irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE;
-#ifdef CONFIG_SMP
- cpumask_setall(bad_irq_desc.affinity);
- bad_irq_desc.node = smp_processor_id();
-#endif
init_arch_irq();
}
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 4340bf3d2c8..69371028a20 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -6,6 +6,7 @@
#include <asm-generic/vmlinux.lds.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
+#include <asm/page.h>
OUTPUT_ARCH(arm)
ENTRY(stext)
@@ -63,7 +64,7 @@ SECTIONS
usr/built-in.o(.init.ramfs)
__initramfs_end = .;
#endif
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__per_cpu_load = .;
__per_cpu_start = .;
*(.data.percpu.page_aligned)
@@ -73,7 +74,7 @@ SECTIONS
#ifndef CONFIG_XIP_KERNEL
__init_begin = _stext;
INIT_DATA
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__init_end = .;
#endif
}
@@ -118,7 +119,7 @@ SECTIONS
*(.got) /* Global offset table */
}
- RODATA
+ RO_DATA(PAGE_SIZE)
_etext = .; /* End of text and rodata section */
@@ -158,17 +159,17 @@ SECTIONS
*(.data.init_task)
#ifdef CONFIG_XIP_KERNEL
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__init_begin = .;
INIT_DATA
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__init_end = .;
#endif
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__nosave_begin = .;
*(.data.nosave)
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__nosave_end = .;
/*
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index cc270beadd5..a55398ed121 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -24,6 +24,8 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/at73c213.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
#include <linux/clk.h>
#include <mach/hardware.h>
@@ -218,6 +220,56 @@ static struct gpio_led ek_leds[] = {
}
};
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+ {
+ .gpio = AT91_PIN_PA30,
+ .code = BTN_3,
+ .desc = "Button 3",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+ {
+ .gpio = AT91_PIN_PA31,
+ .code = BTN_4,
+ .desc = "Button 4",
+ .active_low = 1,
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+ .buttons = ek_buttons,
+ .nbuttons = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_button_data,
+ }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+ at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */
+ at91_set_deglitch(AT91_PIN_PA30, 1);
+ at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */
+ at91_set_deglitch(AT91_PIN_PA31, 1);
+
+ platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
static struct i2c_board_info __initdata ek_i2c_devices[] = {
{
I2C_BOARD_INFO("24c512", 0x50),
@@ -245,6 +297,8 @@ static void __init ek_board_init(void)
at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ /* Push Buttons */
+ ek_add_device_buttons();
/* PCK0 provides MCLK to the WM8731 */
at91_set_B_periph(AT91_PIN_PC1, 0);
/* SSC (for WM8731) */
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 35e12a49d1a..f6b5672cabd 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -186,19 +186,21 @@ static struct fb_monspecs at91fb_default_monspecs = {
static void at91_lcdc_power_control(int on)
{
if (on)
- at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */
+ at91_set_gpio_value(AT91_PIN_PC1, 0); /* power up */
else
- at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */
+ at91_set_gpio_value(AT91_PIN_PC1, 1); /* power down */
}
/* Driver datas */
static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+ .lcdcon_is_backlight = true,
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN,
.default_lcdcon2 = AT91SAM9RL_DEFAULT_LCDCON2,
.default_monspecs = &at91fb_default_monspecs,
.atmel_lcdfb_power_control = at91_lcdc_power_control,
.guard_time = 1,
+ .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
};
#else
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index e70fc7c66bb..ed2a48a9ce7 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -36,7 +36,6 @@
#include <mach/hwa742.h>
#include <mach/lcd_mipid.h>
#include <mach/mmc.h>
-#include <mach/usb.h>
#include <mach/clock.h>
#define ADS7846_PENDOWN_GPIO 15
@@ -205,9 +204,11 @@ static int nokia770_mmc_get_cover_state(struct device *dev, int slot)
static struct omap_mmc_platform_data nokia770_mmc2_data = {
.nr_slots = 1,
.dma_mask = 0xffffffff,
+ .max_freq = 12000000,
.slots[0] = {
.set_power = nokia770_mmc_set_power,
.get_cover_state = nokia770_mmc_get_cover_state,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.name = "mmcblk",
},
};
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index 0af4d6c85b4..6810b4aeb02 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -203,5 +203,5 @@ module_exit(omap1_mbox_exit);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions");
-MODULE_AUTHOR("Hiroshi DOYU" <Hiroshi.DOYU@nokia.com>);
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
MODULE_ALIAS("platform:omap1-mailbox");
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index da93b86234e..9a0bf6744a0 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -362,6 +362,7 @@ static struct omap_onenand_platform_data board_onenand_data = {
.gpio_irq = 65,
.parts = onenand_partitions,
.nr_parts = ARRAY_SIZE(onenand_partitions),
+ .flags = ONENAND_SYNC_READWRITE,
};
static void __init board_onenand_init(void)
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 2fd22f9c5f0..54fec53a48e 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -31,6 +31,8 @@ static struct platform_device gpmc_onenand_device = {
static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
{
struct gpmc_timings t;
+ u32 reg;
+ int err;
const int t_cer = 15;
const int t_avdp = 12;
@@ -43,6 +45,11 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
const int t_wpl = 40;
const int t_wph = 30;
+ /* Ensure sync read and sync write are disabled */
+ reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+ reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
+ writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
memset(&t, 0, sizeof(t));
t.sync_clk = 0;
t.cs_on = 0;
@@ -74,7 +81,16 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
GPMC_CONFIG1_DEVICESIZE_16 |
GPMC_CONFIG1_MUXADDDATA);
- return gpmc_cs_set_timings(cs, &t);
+ err = gpmc_cs_set_timings(cs, &t);
+ if (err)
+ return err;
+
+ /* Ensure sync read and sync write are disabled */
+ reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+ reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
+ writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
+ return 0;
}
static void set_onenand_cfg(void __iomem *onenand_base, int latency,
@@ -124,7 +140,8 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
} else if (cfg->flags & ONENAND_SYNC_READWRITE) {
sync_read = 1;
sync_write = 1;
- }
+ } else
+ return omap2_onenand_set_async_mode(cs, onenand_base);
if (!freq) {
/* Very first call freq is not known */
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 458990e20c6..a98201cc265 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -48,6 +48,28 @@ int omap_chip_is(struct omap_chip_id oci)
}
EXPORT_SYMBOL(omap_chip_is);
+int omap_type(void)
+{
+ u32 val = 0;
+
+ if (cpu_is_omap24xx())
+ val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
+ else if (cpu_is_omap34xx())
+ val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
+ else {
+ pr_err("Cannot detect omap type!\n");
+ goto out;
+ }
+
+ val &= OMAP2_DEVICETYPE_MASK;
+ val >>= 8;
+
+out:
+ return val;
+}
+EXPORT_SYMBOL(omap_type);
+
+
/*----------------------------------------------------------------------------*/
#define OMAP_TAP_IDCODE 0x0204
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index fd5b8a5925c..6f71f3730c9 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -282,12 +282,12 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
return -ENOMEM;
/* DSP or IVA2 IRQ */
- mbox_dsp_info.irq = platform_get_irq(pdev, 0);
- if (mbox_dsp_info.irq < 0) {
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0) {
dev_err(&pdev->dev, "invalid irq resource\n");
- ret = -ENODEV;
goto err_dsp;
}
+ mbox_dsp_info.irq = ret;
ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
if (ret)
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 9756a878fd9..1541fd4c8d0 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -263,8 +263,19 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
{
int ret = 0;
- struct twl_mmc_controller *c = &hsmmc[1];
+ struct twl_mmc_controller *c = NULL;
struct omap_mmc_platform_data *mmc = dev->platform_data;
+ int i;
+
+ for (i = 1; i < ARRAY_SIZE(hsmmc); i++) {
+ if (mmc == hsmmc[i].mmc) {
+ c = &hsmmc[i];
+ break;
+ }
+ }
+
+ if (c == NULL)
+ return -ENODEV;
/* If we don't see a Vcc regulator, assume it's a fixed
* voltage always-on regulator.
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 6a5bc3021bd..ec71a696578 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -48,8 +48,6 @@
#include <plat/mci.h>
#include <plat/udc.h>
-#include <plat/regs-serial.h>
-
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
@@ -275,6 +273,7 @@ static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
.nr_chips = 1,
.nr_partitions = ARRAY_SIZE(mini2440_default_nand_part),
.partitions = mini2440_default_nand_part,
+ .flash_bbt = 1, /* we use u-boot to create a BBT */
},
};
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index e23b581aa0e..0fb385bd9cd 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -433,8 +433,7 @@ static struct s3c2410_nand_set gta02_nand_sets[] = {
*/
.name = "neo1973-nand",
.nr_chips = 1,
- .use_bbt = 1,
- .force_soft_ecc = 1,
+ .flash_bbt = 1,
},
};
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index def14ec265b..7677a4a1cef 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -2457,6 +2457,19 @@ static int __init omap_init_dma(void)
setup_irq(irq, &omap24xx_dma_irq);
}
+ /* Enable smartidle idlemodes and autoidle */
+ if (cpu_is_omap34xx()) {
+ u32 v = dma_read(OCP_SYSCONFIG);
+ v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
+ DMA_SYSCONFIG_SIDLEMODE_MASK |
+ DMA_SYSCONFIG_AUTOIDLE);
+ v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
+ DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
+ DMA_SYSCONFIG_AUTOIDLE);
+ dma_write(v , OCP_SYSCONFIG);
+ }
+
+
/* FIXME: Update LCD DMA to work on 24xx */
if (cpu_class_is_omap1()) {
r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 7fd89ba8d3b..26b387c1242 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1585,6 +1585,7 @@ static int __init _omap_gpio_init(void)
__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
__raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
__raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
+ __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_DEBOUNCE_EN);
/* Initialize interface clock ungated, module enabled */
__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index fc60c4ebcc2..285eaa3a827 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -30,6 +30,17 @@
#ifndef __ASM_ARCH_OMAP_CPU_H
#define __ASM_ARCH_OMAP_CPU_H
+/*
+ * Omap device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define OMAP2_DEVICE_TYPE_TEST 0
+#define OMAP2_DEVICE_TYPE_EMU 1
+#define OMAP2_DEVICE_TYPE_SEC 2
+#define OMAP2_DEVICE_TYPE_GP 3
+#define OMAP2_DEVICE_TYPE_BAD 4
+
+int omap_type(void);
+
struct omap_chip_id {
u8 oc;
u8 type;
@@ -424,17 +435,6 @@ IS_OMAP_TYPE(3430, 0x3430)
int omap_chip_is(struct omap_chip_id oci);
-int omap_type(void);
-
-/*
- * Macro to detect device type i.e. EMU/HS/TST/GP/BAD
- */
-#define OMAP2_DEVICE_TYPE_TEST 0
-#define OMAP2_DEVICE_TYPE_EMU 1
-#define OMAP2_DEVICE_TYPE_SEC 2
-#define OMAP2_DEVICE_TYPE_GP 3
-#define OMAP2_DEVICE_TYPE_BAD 4
-
void omap2_check_revision(void);
#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 8c1eae88737..7b939cc0196 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -389,6 +389,21 @@
#define DMA_THREAD_FIFO_25 (0x02 << 14)
#define DMA_THREAD_FIFO_50 (0x03 << 14)
+/* DMA4_OCP_SYSCONFIG bits */
+#define DMA_SYSCONFIG_MIDLEMODE_MASK (3 << 12)
+#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK (3 << 8)
+#define DMA_SYSCONFIG_EMUFREE (1 << 5)
+#define DMA_SYSCONFIG_SIDLEMODE_MASK (3 << 3)
+#define DMA_SYSCONFIG_SOFTRESET (1 << 2)
+#define DMA_SYSCONFIG_AUTOIDLE (1 << 0)
+
+#define DMA_SYSCONFIG_MIDLEMODE(n) ((n) << 12)
+#define DMA_SYSCONFIG_SIDLEMODE(n) ((n) << 3)
+
+#define DMA_IDLEMODE_SMARTIDLE 0x2
+#define DMA_IDLEMODE_NO_IDLE 0x1
+#define DMA_IDLEMODE_FORCE_IDLE 0x0
+
/* Chaining modes*/
#ifndef CONFIG_ARCH_OMAP1
#define OMAP_DMA_STATIC_CHAIN 0x1
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 3b281472056..73f483d56ca 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -201,7 +201,7 @@
#define OMAP2_IO_ADDRESS(pa) IOMEM(__OMAP2_IO_ADDRESS(pa))
#ifdef __ASSEMBLER__
-#define IOMEM(x) x
+#define IOMEM(x) (x)
#else
#define IOMEM(x) ((void __force __iomem *)(x))
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 4cf449fa2cb..4a030139901 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -298,7 +298,7 @@ void flush_iotlb_page(struct iommu *obj, u32 da)
if ((start <= da) && (da < start + bytes)) {
dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
__func__, start, da, bytes);
-
+ iotlb_load_cr(obj, &cr);
iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
}
}
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 65006df3f1b..4ea73804d21 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -133,7 +133,12 @@ void __init omap_detect_sram(void)
if (cpu_is_omap34xx()) {
omap_sram_base = OMAP3_SRAM_PUB_VA;
omap_sram_start = OMAP3_SRAM_PUB_PA;
- omap_sram_size = 0x8000; /* 32K */
+ if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
+ (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
+ omap_sram_size = 0x7000; /* 28K */
+ } else {
+ omap_sram_size = 0x8000; /* 32K */
+ }
} else {
omap_sram_base = OMAP2_SRAM_PUB_VA;
omap_sram_start = OMAP2_SRAM_PUB_PA;
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 74bb7cb5da4..0761766b183 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -34,7 +34,7 @@ obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
-obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
+obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += dev-audio.o
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index b5b9c4d46e9..2e170827e0b 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -37,6 +37,7 @@ extern struct platform_device s3c_device_i2c1;
extern struct platform_device s3c_device_rtc;
extern struct platform_device s3c_device_adc;
extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_iis;
extern struct platform_device s3c_device_hwmon;
extern struct platform_device s3c_device_hsmmc0;
extern struct platform_device s3c_device_hsmmc1;
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 636cb12711d..579a165c282 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -29,7 +29,7 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += irq-pm.o
obj-$(CONFIG_PM) += sleep.o
-obj-$(CONFIG_HAVE_PWM) += pwm.o
+obj-$(CONFIG_S3C24XX_PWM) += pwm.o
obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
obj-$(CONFIG_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C24XX_ADC) += adc.o
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
index 9edf7894eed..da7a61728c1 100644
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -12,8 +12,7 @@
*/
#include <linux/kernel.h>
-
-#include <mach/hardware.h>
+#include <linux/gpio.h>
#include <mach/spi.h>
#include <mach/regs-gpio.h>
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
index f34d0fc69ad..86b9edc6741 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -12,8 +12,7 @@
*/
#include <linux/kernel.h>
-
-#include <mach/hardware.h>
+#include <linux/gpio.h>
#include <mach/spi.h>
#include <mach/regs-gpio.h>
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index 8a5bd7a9c6f..b86e19c9b5b 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -7,6 +7,7 @@ config FRV
default y
select HAVE_IDE
select HAVE_ARCH_TRACEHOOK
+ select HAVE_PERF_COUNTERS
config ZONE_DMA
bool
diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h
index 0409d981fd3..00a57af79af 100644
--- a/arch/frv/include/asm/atomic.h
+++ b/arch/frv/include/asm/atomic.h
@@ -121,10 +121,72 @@ static inline void atomic_dec(atomic_t *v)
#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0)
+/*
+ * 64-bit atomic ops
+ */
+typedef struct {
+ volatile long long counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(i) { (i) }
+
+static inline long long atomic64_read(atomic64_t *v)
+{
+ long long counter;
+
+ asm("ldd%I1 %M1,%0"
+ : "=e"(counter)
+ : "m"(v->counter));
+ return counter;
+}
+
+static inline void atomic64_set(atomic64_t *v, long long i)
+{
+ asm volatile("std%I0 %1,%M0"
+ : "=m"(v->counter)
+ : "e"(i));
+}
+
+extern long long atomic64_inc_return(atomic64_t *v);
+extern long long atomic64_dec_return(atomic64_t *v);
+extern long long atomic64_add_return(long long i, atomic64_t *v);
+extern long long atomic64_sub_return(long long i, atomic64_t *v);
+
+static inline long long atomic64_add_negative(long long i, atomic64_t *v)
+{
+ return atomic64_add_return(i, v) < 0;
+}
+
+static inline void atomic64_add(long long i, atomic64_t *v)
+{
+ atomic64_add_return(i, v);
+}
+
+static inline void atomic64_sub(long long i, atomic64_t *v)
+{
+ atomic64_sub_return(i, v);
+}
+
+static inline void atomic64_inc(atomic64_t *v)
+{
+ atomic64_inc_return(v);
+}
+
+static inline void atomic64_dec(atomic64_t *v)
+{
+ atomic64_dec_return(v);
+}
+
+#define atomic64_sub_and_test(i,v) (atomic64_sub_return((i), (v)) == 0)
+#define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0)
+#define atomic64_inc_and_test(v) (atomic64_inc_return((v)) == 0)
+
/*****************************************************************************/
/*
* exchange value with memory
*/
+extern uint64_t __xchg_64(uint64_t i, volatile void *v);
+
#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
#define xchg(ptr, x) \
@@ -174,8 +236,10 @@ extern uint32_t __xchg_32(uint32_t i, volatile void *v);
#define tas(ptr) (xchg((ptr), 1))
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+#define atomic_cmpxchg(v, old, new) (cmpxchg(&(v)->counter, old, new))
+#define atomic_xchg(v, new) (xchg(&(v)->counter, new))
+#define atomic64_cmpxchg(v, old, new) (__cmpxchg_64(old, new, &(v)->counter))
+#define atomic64_xchg(v, new) (__xchg_64(new, &(v)->counter))
static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
{
diff --git a/arch/frv/include/asm/perf_counter.h b/arch/frv/include/asm/perf_counter.h
new file mode 100644
index 00000000000..ccf726e61b2
--- /dev/null
+++ b/arch/frv/include/asm/perf_counter.h
@@ -0,0 +1,17 @@
+/* FRV performance counter support
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PERF_COUNTER_H
+#define _ASM_PERF_COUNTER_H
+
+#define PERF_COUNTER_INDEX_OFFSET 0
+
+#endif /* _ASM_PERF_COUNTER_H */
diff --git a/arch/frv/include/asm/system.h b/arch/frv/include/asm/system.h
index 7742ec000cc..efd22d9077a 100644
--- a/arch/frv/include/asm/system.h
+++ b/arch/frv/include/asm/system.h
@@ -208,6 +208,8 @@ extern void free_initmem(void);
* - if (*ptr == test) then orig = *ptr; *ptr = test;
* - if (*ptr != test) then orig = *ptr;
*/
+extern uint64_t __cmpxchg_64(uint64_t test, uint64_t new, volatile uint64_t *v);
+
#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
#define cmpxchg(ptr, test, new) \
diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h
index 96d78d5d2c4..4a8fb427ce0 100644
--- a/arch/frv/include/asm/unistd.h
+++ b/arch/frv/include/asm/unistd.h
@@ -341,10 +341,12 @@
#define __NR_inotify_init1 332
#define __NR_preadv 333
#define __NR_pwritev 334
+#define __NR_rt_tgsigqueueinfo 335
+#define __NR_perf_counter_open 336
#ifdef __KERNEL__
-#define NR_syscalls 335
+#define NR_syscalls 337
#define __ARCH_WANT_IPC_PARSE_VERSION
/* #define __ARCH_WANT_OLD_READDIR */
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index 356e0e327a8..fde1e446b44 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -1524,5 +1524,7 @@ sys_call_table:
.long sys_inotify_init1
.long sys_preadv
.long sys_pwritev
+ .long sys_rt_tgsigqueueinfo /* 335 */
+ .long sys_perf_counter_open
syscall_table_size = (. - sys_call_table)
diff --git a/arch/frv/kernel/frv_ksyms.c b/arch/frv/kernel/frv_ksyms.c
index 0316b3c50ef..a89803b58b9 100644
--- a/arch/frv/kernel/frv_ksyms.c
+++ b/arch/frv/kernel/frv_ksyms.c
@@ -67,6 +67,10 @@ EXPORT_SYMBOL(atomic_sub_return);
EXPORT_SYMBOL(__xchg_32);
EXPORT_SYMBOL(__cmpxchg_32);
#endif
+EXPORT_SYMBOL(atomic64_add_return);
+EXPORT_SYMBOL(atomic64_sub_return);
+EXPORT_SYMBOL(__xchg_64);
+EXPORT_SYMBOL(__cmpxchg_64);
EXPORT_SYMBOL(__debug_bug_printk);
EXPORT_SYMBOL(__delay_loops_MHz);
diff --git a/arch/frv/lib/Makefile b/arch/frv/lib/Makefile
index 08be305c9f4..0a377210c89 100644
--- a/arch/frv/lib/Makefile
+++ b/arch/frv/lib/Makefile
@@ -4,5 +4,5 @@
lib-y := \
__ashldi3.o __lshrdi3.o __muldi3.o __ashrdi3.o __negdi2.o __ucmpdi2.o \
- checksum.o memcpy.o memset.o atomic-ops.o \
- outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o
+ checksum.o memcpy.o memset.o atomic-ops.o atomic64-ops.o \
+ outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o perf_counter.o
diff --git a/arch/frv/lib/atomic-ops.S b/arch/frv/lib/atomic-ops.S
index ee0ac905fb0..5e9e6ab5dd0 100644
--- a/arch/frv/lib/atomic-ops.S
+++ b/arch/frv/lib/atomic-ops.S
@@ -163,11 +163,10 @@ __cmpxchg_32:
ld.p @(gr11,gr0),gr8
orcr cc7,cc7,cc3
subcc gr8,gr9,gr7,icc0
- bne icc0,#0,1f
+ bnelr icc0,#0
cst.p gr10,@(gr11,gr0) ,cc3,#1
corcc gr29,gr29,gr0 ,cc3,#1
beq icc3,#0,0b
-1:
bralr
.size __cmpxchg_32, .-__cmpxchg_32
diff --git a/arch/frv/lib/atomic64-ops.S b/arch/frv/lib/atomic64-ops.S
new file mode 100644
index 00000000000..b6194eeac12
--- /dev/null
+++ b/arch/frv/lib/atomic64-ops.S
@@ -0,0 +1,162 @@
+/* kernel atomic64 operations
+ *
+ * For an explanation of how atomic ops work in this arch, see:
+ * Documentation/frv/atomic-ops.txt
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/spr-regs.h>
+
+ .text
+ .balign 4
+
+
+###############################################################################
+#
+# long long atomic64_inc_return(atomic64_t *v)
+#
+###############################################################################
+ .globl atomic64_inc_return
+ .type atomic64_inc_return,@function
+atomic64_inc_return:
+ or.p gr8,gr8,gr10
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3 /* set CC3 to true */
+ addicc gr9,#1,gr9,icc0
+ addxi gr8,#0,gr8,icc0
+ cstd.p gr8,@(gr10,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size atomic64_inc_return, .-atomic64_inc_return
+
+###############################################################################
+#
+# long long atomic64_dec_return(atomic64_t *v)
+#
+###############################################################################
+ .globl atomic64_dec_return
+ .type atomic64_dec_return,@function
+atomic64_dec_return:
+ or.p gr8,gr8,gr10
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3 /* set CC3 to true */
+ subicc gr9,#1,gr9,icc0
+ subxi gr8,#0,gr8,icc0
+ cstd.p gr8,@(gr10,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size atomic64_dec_return, .-atomic64_dec_return
+
+###############################################################################
+#
+# long long atomic64_add_return(long long i, atomic64_t *v)
+#
+###############################################################################
+ .globl atomic64_add_return
+ .type atomic64_add_return,@function
+atomic64_add_return:
+ or.p gr8,gr8,gr4
+ or gr9,gr9,gr5
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3 /* set CC3 to true */
+ addcc gr9,gr5,gr9,icc0
+ addx gr8,gr4,gr8,icc0
+ cstd.p gr8,@(gr10,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size atomic64_add_return, .-atomic64_add_return
+
+###############################################################################
+#
+# long long atomic64_sub_return(long long i, atomic64_t *v)
+#
+###############################################################################
+ .globl atomic64_sub_return
+ .type atomic64_sub_return,@function
+atomic64_sub_return:
+ or.p gr8,gr8,gr4
+ or gr9,gr9,gr5
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3 /* set CC3 to true */
+ subcc gr9,gr5,gr9,icc0
+ subx gr8,gr4,gr8,icc0
+ cstd.p gr8,@(gr10,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size atomic64_sub_return, .-atomic64_sub_return
+
+###############################################################################
+#
+# uint64_t __xchg_64(uint64_t i, uint64_t *v)
+#
+###############################################################################
+ .globl __xchg_64
+ .type __xchg_64,@function
+__xchg_64:
+ or.p gr8,gr8,gr4
+ or gr9,gr9,gr5
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3 /* set CC3 to true */
+ cstd.p gr4,@(gr10,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size __xchg_64, .-__xchg_64
+
+###############################################################################
+#
+# uint64_t __cmpxchg_64(uint64_t test, uint64_t new, uint64_t *v)
+#
+###############################################################################
+ .globl __cmpxchg_64
+ .type __cmpxchg_64,@function
+__cmpxchg_64:
+ or.p gr8,gr8,gr4
+ or gr9,gr9,gr5
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr12,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3
+ subcc gr8,gr4,gr0,icc0
+ subcc.p gr9,gr5,gr0,icc1
+ bnelr icc0,#0
+ bnelr icc1,#0
+ cstd.p gr10,@(gr12,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size __cmpxchg_64, .-__cmpxchg_64
+
diff --git a/arch/frv/lib/perf_counter.c b/arch/frv/lib/perf_counter.c
new file mode 100644
index 00000000000..2000feecd57
--- /dev/null
+++ b/arch/frv/lib/perf_counter.c
@@ -0,0 +1,19 @@
+/* Performance counter handling
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/perf_counter.h>
+
+/*
+ * mark the performance counter as pending
+ */
+void set_perf_counter_pending(void)
+{
+}
diff --git a/arch/ia64/kernel/esi.c b/arch/ia64/kernel/esi.c
index ebf4e988e78..d5764a3d74a 100644
--- a/arch/ia64/kernel/esi.c
+++ b/arch/ia64/kernel/esi.c
@@ -65,7 +65,7 @@ static int __init esi_init (void)
}
if (!esi)
- return -ENODEV;;
+ return -ENODEV;
systab = __va(esi);
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index abce2468a40..f1782705b1f 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -5603,7 +5603,7 @@ pfm_interrupt_handler(int irq, void *arg)
* /proc/perfmon interface, for debug only
*/
-#define PFM_PROC_SHOW_HEADER ((void *)nr_cpu_ids+1)
+#define PFM_PROC_SHOW_HEADER ((void *)(long)nr_cpu_ids+1)
static void *
pfm_proc_start(struct seq_file *m, loff_t *pos)
diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c
index 7053c55b764..e6676fca482 100644
--- a/arch/ia64/kernel/salinfo.c
+++ b/arch/ia64/kernel/salinfo.c
@@ -192,7 +192,7 @@ struct salinfo_platform_oemdata_parms {
static void
salinfo_work_to_do(struct salinfo_data *data)
{
- down_trylock(&data->mutex);
+ (void)(down_trylock(&data->mutex) ?: 0);
up(&data->mutex);
}
diff --git a/arch/ia64/kvm/kvm_lib.c b/arch/ia64/kvm/kvm_lib.c
index a85cb611ecd..f1268b8e6f9 100644
--- a/arch/ia64/kvm/kvm_lib.c
+++ b/arch/ia64/kvm/kvm_lib.c
@@ -11,5 +11,11 @@
*
*/
#undef CONFIG_MODULES
+#include <linux/module.h>
+#undef CONFIG_KALLSYMS
+#undef EXPORT_SYMBOL
+#undef EXPORT_SYMBOL_GPL
+#define EXPORT_SYMBOL(sym)
+#define EXPORT_SYMBOL_GPL(sym)
#include "../../../lib/vsprintf.c"
#include "../../../lib/ctype.c"
diff --git a/arch/ia64/kvm/process.c b/arch/ia64/kvm/process.c
index a8f84da04b4..bb862fb224f 100644
--- a/arch/ia64/kvm/process.c
+++ b/arch/ia64/kvm/process.c
@@ -130,7 +130,7 @@ static void collect_interruption(struct kvm_vcpu *vcpu)
if (vdcr & IA64_DCR_PP) {
vpsr |= IA64_PSR_PP;
} else {
- vpsr &= ~IA64_PSR_PP;;
+ vpsr &= ~IA64_PSR_PP;
}
vcpu_set_psr(vcpu, vpsr);
@@ -594,11 +594,11 @@ static void set_pal_call_data(struct kvm_vcpu *vcpu)
p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30);
break;
case PAL_BRAND_INFO:
- p->u.pal_data.gr29 = gr29;;
+ p->u.pal_data.gr29 = gr29;
p->u.pal_data.gr30 = kvm_trans_pal_call_args(vcpu, gr30);
break;
default:
- p->u.pal_data.gr29 = gr29;;
+ p->u.pal_data.gr29 = gr29;
p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30);
}
p->u.pal_data.gr28 = gr28;
diff --git a/arch/ia64/kvm/vcpu.c b/arch/ia64/kvm/vcpu.c
index a2c6c15e476..46b02cbcc87 100644
--- a/arch/ia64/kvm/vcpu.c
+++ b/arch/ia64/kvm/vcpu.c
@@ -406,7 +406,7 @@ void getreg(unsigned long regnum, unsigned long *val,
* Now look at registers in [0-31] range and init correct UNAT
*/
addr = (unsigned long)regs;
- unat = &regs->eml_unat;;
+ unat = &regs->eml_unat;
addr += gr_info[regnum];
diff --git a/arch/ia64/kvm/vtlb.c b/arch/ia64/kvm/vtlb.c
index 4290a429bf7..20b3852f7a6 100644
--- a/arch/ia64/kvm/vtlb.c
+++ b/arch/ia64/kvm/vtlb.c
@@ -135,7 +135,7 @@ struct thash_data *__vtr_lookup(struct kvm_vcpu *vcpu, u64 va, int type)
u64 rid;
rid = vcpu_get_rr(vcpu, va);
- rid = rid & RR_RID_MASK;;
+ rid = rid & RR_RID_MASK;
if (type == D_TLB) {
if (vcpu_quick_region_check(vcpu->arch.dtr_regions, va)) {
for (trp = (struct thash_data *)&vcpu->arch.dtrs, i = 0;
@@ -518,7 +518,7 @@ struct thash_data *vtlb_lookup(struct kvm_vcpu *v, u64 va, int is_data)
struct thash_cb *hcb = &v->arch.vtlb;
- cch = __vtr_lookup(v, va, is_data);;
+ cch = __vtr_lookup(v, va, is_data);
if (cch)
return cch;
diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c
index 76645cf6ac5..25831c47c57 100644
--- a/arch/ia64/sn/kernel/io_common.c
+++ b/arch/ia64/sn/kernel/io_common.c
@@ -435,7 +435,8 @@ void sn_generate_path(struct pci_bus *pci_bus, char *address)
bricktype = MODULE_GET_BTYPE(moduleid);
if ((bricktype == L1_BRICKTYPE_191010) ||
(bricktype == L1_BRICKTYPE_1932))
- sprintf(address, "%s^%d", address, geo_slot(geoid));
+ sprintf(address + strlen(address), "^%d",
+ geo_slot(geoid));
}
void __devinit
diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h
index fef5b434dad..fad68616af3 100644
--- a/arch/mn10300/include/asm/unistd.h
+++ b/arch/mn10300/include/asm/unistd.h
@@ -346,10 +346,12 @@
#define __NR_inotify_init1 333
#define __NR_preadv 334
#define __NR_pwritev 335
+#define __NR_rt_tgsigqueueinfo 336
+#define __NR_perf_counter_open 337
#ifdef __KERNEL__
-#define NR_syscalls 326
+#define NR_syscalls 338
/*
* specify the deprecated syscalls we want to support on this arch
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 7408a27199f..e0d2563af4f 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -722,6 +722,8 @@ ENTRY(sys_call_table)
.long sys_inotify_init1
.long sys_preadv
.long sys_pwritev /* 335 */
+ .long sys_rt_tgsigqueueinfo
+ .long sys_perf_counter_open
nr_syscalls=(.-sys_call_table)/4
diff --git a/arch/powerpc/include/asm/perf_counter.h b/arch/powerpc/include/asm/perf_counter.h
index 8ccd4e15576..0ea0639fcf7 100644
--- a/arch/powerpc/include/asm/perf_counter.h
+++ b/arch/powerpc/include/asm/perf_counter.h
@@ -61,6 +61,8 @@ struct pt_regs;
extern unsigned long perf_misc_flags(struct pt_regs *regs);
extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
+#define PERF_COUNTER_INDEX_OFFSET 1
+
/*
* Only override the default definitions in include/linux/perf_counter.h
* if we have hardware PMU support.
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index a27d0d5a6f8..1cd02f6073a 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -99,7 +99,9 @@ struct kvm_s390_sie_block {
__u8 reservedd0[48]; /* 0x00d0 */
__u64 gcr[16]; /* 0x0100 */
__u64 gbea; /* 0x0180 */
- __u8 reserved188[120]; /* 0x0188 */
+ __u8 reserved188[24]; /* 0x0188 */
+ __u32 fac; /* 0x01a0 */
+ __u8 reserved1a4[92]; /* 0x01a4 */
} __attribute__((packed));
struct kvm_vcpu_stat {
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index c18b21d6991..90d9d1ba258 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -25,6 +25,7 @@
#include <asm/lowcore.h>
#include <asm/pgtable.h>
#include <asm/nmi.h>
+#include <asm/system.h>
#include "kvm-s390.h"
#include "gaccess.h"
@@ -69,6 +70,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
{ NULL }
};
+static unsigned long long *facilities;
/* Section: not file related */
void kvm_arch_hardware_enable(void *garbage)
@@ -288,6 +290,7 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
vcpu->arch.sie_block->gmsor = vcpu->kvm->arch.guest_origin;
vcpu->arch.sie_block->ecb = 2;
vcpu->arch.sie_block->eca = 0xC1002001U;
+ vcpu->arch.sie_block->fac = (int) (long) facilities;
hrtimer_init(&vcpu->arch.ckc_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
tasklet_init(&vcpu->arch.tasklet, kvm_s390_tasklet,
(unsigned long) vcpu);
@@ -739,11 +742,29 @@ gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
static int __init kvm_s390_init(void)
{
- return kvm_init(NULL, sizeof(struct kvm_vcpu), THIS_MODULE);
+ int ret;
+ ret = kvm_init(NULL, sizeof(struct kvm_vcpu), THIS_MODULE);
+ if (ret)
+ return ret;
+
+ /*
+ * guests can ask for up to 255+1 double words, we need a full page
+ * to hold the maximum amount of facilites. On the other hand, we
+ * only set facilities that are known to work in KVM.
+ */
+ facilities = (unsigned long long *) get_zeroed_page(GFP_DMA);
+ if (!facilities) {
+ kvm_exit();
+ return -ENOMEM;
+ }
+ stfle(facilities, 1);
+ facilities[0] &= 0xff00fff3f0700000ULL;
+ return 0;
}
static void __exit kvm_s390_exit(void)
{
+ free_page((unsigned long) facilities);
kvm_exit();
}
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 93ecd06e1a7..d426aac8095 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -158,7 +158,7 @@ static int handle_stfl(struct kvm_vcpu *vcpu)
vcpu->stat.instruction_stfl++;
/* only pass the facility bits, which we can handle */
- facility_list &= 0xfe00fff3;
+ facility_list &= 0xff00fff3;
rc = copy_to_guest(vcpu, offsetof(struct _lowcore, stfl_fac_list),
&facility_list, sizeof(facility_list));
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 8ece0b5bd02..39224b57c6e 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -61,10 +61,6 @@ config EARLY_PRINTK
select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using
the kernel command line option to toggle back and forth.
-config DEBUG_BOOTMEM
- depends on DEBUG_KERNEL
- bool "Debug BOOTMEM initialization"
-
config DEBUG_STACKOVERFLOW
bool "Check for stack overflows"
depends on DEBUG_KERNEL && SUPERH32
diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
index 9c3a33210d6..180455642a4 100644
--- a/arch/sh/boards/mach-se/7206/io.c
+++ b/arch/sh/boards/mach-se/7206/io.c
@@ -50,7 +50,7 @@ unsigned char se7206_inb_p(unsigned long port)
unsigned short se7206_inw(unsigned long port)
{
- return *port2adr(port);;
+ return *port2adr(port);
}
void se7206_outb(unsigned char value, unsigned long port)
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 9cd04bd558b..c050a8d76df 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -23,6 +23,8 @@
#include <media/sh_mobile_ceu.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
+#include <asm/sh_eth.h>
+#include <asm/clock.h>
#include <asm/sh_keysc.h>
#include <cpu/sh7724.h>
#include <mach-se/mach/se7724.h>
@@ -272,6 +274,34 @@ static struct platform_device keysc_device = {
},
};
+/* SH Eth */
+static struct resource sh_eth_resources[] = {
+ [0] = {
+ .start = SH_ETH_ADDR,
+ .end = SH_ETH_ADDR + 0x1FC,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 91,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+struct sh_eth_plat_data sh_eth_plat = {
+ .phy = 0x1f, /* SMSC LAN8187 */
+ .edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device sh_eth_device = {
+ .name = "sh-eth",
+ .id = 0,
+ .dev = {
+ .platform_data = &sh_eth_plat,
+ },
+ .num_resources = ARRAY_SIZE(sh_eth_resources),
+ .resource = sh_eth_resources,
+};
+
static struct platform_device *ms7724se_devices[] __initdata = {
&heartbeat_device,
&smc91x_eth_device,
@@ -280,8 +310,57 @@ static struct platform_device *ms7724se_devices[] __initdata = {
&ceu0_device,
&ceu1_device,
&keysc_device,
+ &sh_eth_device,
};
+#define EEPROM_OP 0xBA206000
+#define EEPROM_ADR 0xBA206004
+#define EEPROM_DATA 0xBA20600C
+#define EEPROM_STAT 0xBA206010
+#define EEPROM_STRT 0xBA206014
+static int __init sh_eth_is_eeprom_ready(void)
+{
+ int t = 10000;
+
+ while (t--) {
+ if (!ctrl_inw(EEPROM_STAT))
+ return 1;
+ cpu_relax();
+ }
+
+ printk(KERN_ERR "ms7724se can not access to eeprom\n");
+ return 0;
+}
+
+static void __init sh_eth_init(void)
+{
+ int i;
+ u16 mac[3];
+
+ /* check EEPROM status */
+ if (!sh_eth_is_eeprom_ready())
+ return;
+
+ /* read MAC addr from EEPROM */
+ for (i = 0 ; i < 3 ; i++) {
+ ctrl_outw(0x0, EEPROM_OP); /* read */
+ ctrl_outw(i*2, EEPROM_ADR);
+ ctrl_outw(0x1, EEPROM_STRT);
+ if (!sh_eth_is_eeprom_ready())
+ return;
+
+ mac[i] = ctrl_inw(EEPROM_DATA);
+ mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */
+ }
+
+ /* reset sh-eth */
+ ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
+
+ /* set MAC addr */
+ ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR);
+ ctrl_outl((mac[2]), SH_ETH_MALR);
+}
+
#define SW4140 0xBA201000
#define FPGA_OUT 0xBA200400
#define PORT_HIZA 0xA4050158
@@ -302,7 +381,8 @@ static int __init devices_setup(void)
ctrl_outw(ctrl_inw(FPGA_OUT) &
~((1 << 1) | /* LAN */
(1 << 6) | /* VIDEO DAC */
- (1 << 12)), /* USB0 */
+ (1 << 12) | /* USB0 */
+ (1 << 14)), /* RMII */
FPGA_OUT);
/* enable IRQ 0,1,2 */
@@ -374,7 +454,7 @@ static int __init devices_setup(void)
gpio_request(GPIO_FN_VIO0_CLK, NULL);
gpio_request(GPIO_FN_VIO0_FLD, NULL);
gpio_request(GPIO_FN_VIO0_HD, NULL);
- platform_resource_setup_memory(&ceu0_device, "ceu", 4 << 20);
+ platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
/* enable CEU1 */
gpio_request(GPIO_FN_VIO1_D7, NULL);
@@ -389,7 +469,7 @@ static int __init devices_setup(void)
gpio_request(GPIO_FN_VIO1_HD, NULL);
gpio_request(GPIO_FN_VIO1_VD, NULL);
gpio_request(GPIO_FN_VIO1_CLK, NULL);
- platform_resource_setup_memory(&ceu1_device, "ceu", 4 << 20);
+ platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
/* KEYSC */
gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
@@ -404,6 +484,28 @@ static int __init devices_setup(void)
gpio_request(GPIO_FN_KEYOUT1, NULL);
gpio_request(GPIO_FN_KEYOUT0, NULL);
+ /*
+ * enable SH-Eth
+ *
+ * please remove J33 pin from your board !!
+ *
+ * ms7724 board should not use GPIO_FN_LNKSTA pin
+ * So, This time PTX5 is set to input pin
+ */
+ gpio_request(GPIO_FN_RMII_RXD0, NULL);
+ gpio_request(GPIO_FN_RMII_RXD1, NULL);
+ gpio_request(GPIO_FN_RMII_TXD0, NULL);
+ gpio_request(GPIO_FN_RMII_TXD1, NULL);
+ gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
+ gpio_request(GPIO_FN_RMII_TX_EN, NULL);
+ gpio_request(GPIO_FN_RMII_RX_ER, NULL);
+ gpio_request(GPIO_FN_RMII_CRS_DV, NULL);
+ gpio_request(GPIO_FN_MDIO, NULL);
+ gpio_request(GPIO_FN_MDC, NULL);
+ gpio_request(GPIO_PTX5, NULL);
+ gpio_direction_input(GPIO_PTX5);
+ sh_eth_init();
+
if (sw & SW41_B) {
/* SVGA */
lcdc_info.ch[0].lcd_cfg.xres = 800;
@@ -437,7 +539,7 @@ static int __init devices_setup(void)
}
return platform_add_devices(ms7724se_devices,
- ARRAY_SIZE(ms7724se_devices));
+ ARRAY_SIZE(ms7724se_devices));
}
device_initcall(devices_setup);
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index da627d22c00..b18cfd39cac 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -309,7 +309,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
+CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
#
# Bus options
@@ -858,7 +858,35 @@ CONFIG_VIDEO_SH_MOBILE_CEU=y
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -870,6 +898,27 @@ CONFIG_VIDEO_SH_MOBILE_CEU=y
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+CONFIG_LOGO_SUPERH_VGA16=y
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
index 3840270283e..3ee783a0a07 100644
--- a/arch/sh/configs/se7724_defconfig
+++ b/arch/sh/configs/se7724_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.30
-# Thu Jun 18 16:09:05 2009
+# Mon Jun 29 16:28:43 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -88,10 +91,12 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
#
# Performance Counters
#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
@@ -107,6 +112,10 @@ CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
@@ -119,7 +128,7 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -584,7 +593,6 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
@@ -624,7 +632,7 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
-# CONFIG_SH_ETH is not set
+CONFIG_SH_ETH=y
CONFIG_SMC91X=y
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
@@ -801,6 +809,11 @@ CONFIG_SPI_BITBANG=y
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
@@ -851,6 +864,8 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
@@ -1196,6 +1211,7 @@ CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1260,6 +1276,7 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
diff --git a/arch/sh/include/asm/perf_counter.h b/arch/sh/include/asm/perf_counter.h
index a8153c2aa6f..61c2b40c802 100644
--- a/arch/sh/include/asm/perf_counter.h
+++ b/arch/sh/include/asm/perf_counter.h
@@ -2,6 +2,6 @@
#define __ASM_SH_PERF_COUNTER_H
/* SH only supports software counters through this interface. */
-#define set_perf_counter_pending() do { } while (0)
+static inline void set_perf_counter_pending(void) {}
#endif /* __ASM_SH_PERF_COUNTER_H */
diff --git a/arch/sh/include/asm/syscall_32.h b/arch/sh/include/asm/syscall_32.h
index 5bc34681d99..6f83f2cc45c 100644
--- a/arch/sh/include/asm/syscall_32.h
+++ b/arch/sh/include/asm/syscall_32.h
@@ -3,6 +3,7 @@
#include <linux/kernel.h>
#include <linux/sched.h>
+#include <linux/err.h>
#include <asm/ptrace.h>
/* The system call number is given by the user in R3 */
diff --git a/arch/sh/include/mach-se/mach/se7724.h b/arch/sh/include/mach-se/mach/se7724.h
index 74164b60d0d..29514a39d0f 100644
--- a/arch/sh/include/mach-se/mach/se7724.h
+++ b/arch/sh/include/mach-se/mach/se7724.h
@@ -20,6 +20,11 @@
*/
#include <asm/addrspace.h>
+/* SH Eth */
+#define SH_ETH_ADDR (0xA4600000)
+#define SH_ETH_MAHR (SH_ETH_ADDR + 0x1C0)
+#define SH_ETH_MALR (SH_ETH_ADDR + 0x1C8)
+
#define PA_LED (0xba203000) /* 8bit LED */
#define IRQ_MODE (0xba200010)
#define IRQ0_SR (0xba200014)
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index cc8ddbdf3d7..71925946f1e 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -15,12 +15,28 @@
#include <linux/mm.h>
#include <linux/hardirq.h>
#include <linux/kprobes.h>
-#include <linux/marker.h>
+#include <linux/perf_counter.h>
#include <asm/io_trapped.h>
#include <asm/system.h>
#include <asm/mmu_context.h>
#include <asm/tlbflush.h>
+static inline int notify_page_fault(struct pt_regs *regs, int trap)
+{
+ int ret = 0;
+
+#ifdef CONFIG_KPROBES
+ if (!user_mode(regs)) {
+ preempt_disable();
+ if (kprobe_running() && kprobe_fault_handler(regs, trap))
+ ret = 1;
+ preempt_enable();
+ }
+#endif
+
+ return ret;
+}
+
/*
* This routine handles page faults. It determines the address,
* and the problem, and then passes it off to one of the appropriate
@@ -87,13 +103,16 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
return;
}
+ mm = tsk->mm;
+
+ if (unlikely(notify_page_fault(regs, lookup_exception_vector())))
+ return;
+
/* Only enable interrupts if they were on before the fault */
- if ((regs->sr & SR_IMASK) != SR_IMASK) {
- trace_hardirqs_on();
+ if ((regs->sr & SR_IMASK) != SR_IMASK)
local_irq_enable();
- }
- mm = tsk->mm;
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
/*
* If we're in an interrupt or have no user
@@ -141,10 +160,15 @@ survive:
goto do_sigbus;
BUG();
}
- if (fault & VM_FAULT_MAJOR)
+ if (fault & VM_FAULT_MAJOR) {
tsk->maj_flt++;
- else
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+ regs, address);
+ } else {
tsk->min_flt++;
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+ regs, address);
+ }
up_read(&mm->mmap_sem);
return;
@@ -245,22 +269,6 @@ do_sigbus:
goto no_context;
}
-static inline int notify_page_fault(struct pt_regs *regs, int trap)
-{
- int ret = 0;
-
-#ifdef CONFIG_KPROBES
- if (!user_mode(regs)) {
- preempt_disable();
- if (kprobe_running() && kprobe_fault_handler(regs, trap))
- ret = 1;
- preempt_enable();
- }
-#endif
-
- return ret;
-}
-
/*
* Called with interrupts disabled.
*/
@@ -273,12 +281,7 @@ asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs,
pmd_t *pmd;
pte_t *pte;
pte_t entry;
- int ret = 0;
-
- if (notify_page_fault(regs, lookup_exception_vector()))
- goto out;
-
- ret = 1;
+ int ret = 1;
/*
* We don't take page faults for P1, P2, and parts of P4, these
diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c
index fcbb6e135ce..3ce40ea3482 100644
--- a/arch/sh/mm/tlbflush_64.c
+++ b/arch/sh/mm/tlbflush_64.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2000, 2001 Paolo Alberelli
* Copyright (C) 2003 Richard Curnow (/proc/tlb, bug fixes)
- * Copyright (C) 2003 Paul Mundt
+ * Copyright (C) 2003 - 2009 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -20,6 +20,7 @@
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/smp.h>
+#include <linux/perf_counter.h>
#include <linux/interrupt.h>
#include <asm/system.h>
#include <asm/io.h>
@@ -115,6 +116,8 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
/* Not an IO address, so reenable interrupts */
local_irq_enable();
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+
/*
* If we're in an interrupt or have no user
* context, we must not take the fault..
@@ -195,10 +198,16 @@ survive:
goto do_sigbus;
BUG();
}
- if (fault & VM_FAULT_MAJOR)
+
+ if (fault & VM_FAULT_MAJOR) {
tsk->maj_flt++;
- else
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+ regs, address);
+ } else {
tsk->min_flt++;
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+ regs, address);
+ }
/* If we get here, the page fault has been handled. Do the TLB refill
now from the newly-setup PTE, to avoid having to fault again right
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d1430ef6b4f..c07f7220590 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1913,25 +1913,14 @@ config DMAR_DEFAULT_ON
recommended you say N here while the DMAR code remains
experimental.
-config DMAR_GFX_WA
- def_bool y
- prompt "Support for Graphics workaround"
- depends on DMAR
- ---help---
- Current Graphics drivers tend to use physical address
- for DMA and avoid using DMA APIs. Setting this config
- option permits the IOMMU driver to set a unity map for
- all the OS-visible memory. Hence the driver can continue
- to use physical addresses for DMA.
-
config DMAR_FLOPPY_WA
def_bool y
depends on DMAR
---help---
- Floppy disk drivers are know to bypass DMA API calls
+ Floppy disk drivers are known to bypass DMA API calls
thereby failing to work when IOMMU is enabled. This
workaround will setup a 1:1 mapping for the first
- 16M to make floppy (an ISA device) work.
+ 16MiB to make floppy (an ISA device) work.
config INTR_REMAP
bool "Support for Interrupt Remapping (EXPERIMENTAL)"
diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h
index 418e632d4a8..7a1065958ba 100644
--- a/arch/x86/include/asm/boot.h
+++ b/arch/x86/include/asm/boot.h
@@ -8,7 +8,7 @@
#ifdef __KERNEL__
-#include <asm/page_types.h>
+#include <asm/pgtable_types.h>
/* Physical address where kernel should be loaded. */
#define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \
@@ -16,10 +16,10 @@
& ~(CONFIG_PHYSICAL_ALIGN - 1))
/* Minimum kernel alignment, as a power of two */
-#ifdef CONFIG_x86_64
+#ifdef CONFIG_X86_64
#define MIN_KERNEL_ALIGN_LG2 PMD_SHIFT
#else
-#define MIN_KERNEL_ALIGN_LG2 (PAGE_SHIFT+1)
+#define MIN_KERNEL_ALIGN_LG2 (PAGE_SHIFT + THREAD_ORDER)
#endif
#define MIN_KERNEL_ALIGN (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2)
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 927958d13c1..1ff685ca221 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -91,7 +91,7 @@ extern void pci_iommu_alloc(void);
#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
-#if defined(CONFIG_X86_64) || defined(CONFIG_DMA_API_DEBUG)
+#if defined(CONFIG_X86_64) || defined(CONFIG_DMAR) || defined(CONFIG_DMA_API_DEBUG)
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 02ecb30982a..103f1ddb0d8 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -42,6 +42,7 @@
#else /* ...!ASSEMBLY */
+#include <linux/kernel.h>
#include <linux/stringify.h>
#ifdef CONFIG_SMP
@@ -155,6 +156,15 @@ do { \
/* We can use this directly for local CPU (faster). */
DECLARE_PER_CPU(unsigned long, this_cpu_off);
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+void *pcpu_lpage_remapped(void *kaddr);
+#else
+static inline void *pcpu_lpage_remapped(void *kaddr)
+{
+ return NULL;
+}
+#endif
+
#endif /* !__ASSEMBLY__ */
#ifdef CONFIG_SMP
diff --git a/arch/x86/include/asm/perf_counter.h b/arch/x86/include/asm/perf_counter.h
index 5fb33e160ea..fa64e401589 100644
--- a/arch/x86/include/asm/perf_counter.h
+++ b/arch/x86/include/asm/perf_counter.h
@@ -87,6 +87,9 @@ union cpuid10_edx {
#ifdef CONFIG_PERF_COUNTERS
extern void init_hw_perf_counters(void);
extern void perf_counters_lapic_init(void);
+
+#define PERF_COUNTER_INDEX_OFFSET 0
+
#else
static inline void init_hw_perf_counters(void) { }
static inline void perf_counters_lapic_init(void) { }
diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h
index 49fb3ecf3bb..621f56d7312 100644
--- a/arch/x86/include/asm/proto.h
+++ b/arch/x86/include/asm/proto.h
@@ -22,7 +22,14 @@ extern int reboot_force;
long do_arch_prctl(struct task_struct *task, int code, unsigned long addr);
-#define round_up(x, y) (((x) + (y) - 1) & ~((y) - 1))
-#define round_down(x, y) ((x) & ~((y) - 1))
+/*
+ * This looks more complex than it should be. But we need to
+ * get the type for the ~ right in round_down (it needs to be
+ * as wide as the result!), and we want to evaluate the macro
+ * arguments just once each.
+ */
+#define __round_mask(x,y) ((__typeof__(x))((y)-1))
+#define round_up(x,y) ((((x)-1) | __round_mask(x,y))+1)
+#define round_down(x,y) ((x) & ~__round_mask(x,y))
#endif /* _ASM_X86_PROTO_H */
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index e5b27d8f1b4..28e5f595604 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -258,13 +258,15 @@ static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
{
#ifdef CONFIG_X86_HT
unsigned bits;
+ int cpu = smp_processor_id();
bits = c->x86_coreid_bits;
-
/* Low order bits define the core id (index of core in socket) */
c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
/* Convert the initial APIC ID into the socket ID */
c->phys_proc_id = c->initial_apicid >> bits;
+ /* use socket ID also for last level cache */
+ per_cpu(cpu_llc_id, cpu) = c->phys_proc_id;
#endif
}
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 6b26d4deada..f1961c07af9 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -848,9 +848,6 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
numa_add_cpu(smp_processor_id());
#endif
-
- /* Cap the iomem address space to what is addressable on all CPUs */
- iomem_resource.end &= (1ULL << c->x86_phys_bits) - 1;
}
#ifdef CONFIG_X86_64
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 284d1de968b..af425b83202 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1117,7 +1117,7 @@ static void mcheck_timer(unsigned long data)
*n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ));
t->expires = jiffies + *n;
- add_timer(t);
+ add_timer_on(t, smp_processor_id());
}
static void mce_do_trigger(struct work_struct *work)
@@ -1321,7 +1321,7 @@ static void mce_init_timer(void)
return;
setup_timer(t, mcheck_timer, smp_processor_id());
t->expires = round_jiffies(jiffies + *n);
- add_timer(t);
+ add_timer_on(t, smp_processor_id());
}
/*
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 76dfef23f78..d4cf4ce19aa 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -401,7 +401,7 @@ static const u64 amd_hw_cache_event_ids
[ C(RESULT_MISS) ] = 0x0041, /* Data Cache Misses */
},
[ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0x0042, /* Data Cache Refills from L2 */
+ [ C(RESULT_ACCESS) ] = 0x0142, /* Data Cache Refills :system */
[ C(RESULT_MISS) ] = 0,
},
[ C(OP_PREFETCH) ] = {
@@ -912,6 +912,8 @@ x86_perf_counter_set_period(struct perf_counter *counter,
err = checking_wrmsrl(hwc->counter_base + idx,
(u64)(-left) & x86_pmu.counter_mask);
+ perf_counter_update_userpage(counter);
+
return ret;
}
@@ -969,13 +971,6 @@ fixed_mode_idx(struct perf_counter *counter, struct hw_perf_counter *hwc)
if (!x86_pmu.num_counters_fixed)
return -1;
- /*
- * Quirk, IA32_FIXED_CTRs do not work on current Atom processors:
- */
- if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
- boot_cpu_data.x86_model == 28)
- return -1;
-
event = hwc->config & ARCH_PERFMON_EVENT_MASK;
if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS)))
@@ -1041,6 +1036,8 @@ try_generic:
x86_perf_counter_set_period(counter, hwc, idx);
x86_pmu.enable(hwc, idx);
+ perf_counter_update_userpage(counter);
+
return 0;
}
@@ -1133,6 +1130,8 @@ static void x86_pmu_disable(struct perf_counter *counter)
x86_perf_counter_update(counter, hwc, idx);
cpuc->counters[idx] = NULL;
clear_bit(idx, cpuc->used_mask);
+
+ perf_counter_update_userpage(counter);
}
/*
@@ -1428,8 +1427,6 @@ static int intel_pmu_init(void)
*/
x86_pmu.num_counters_fixed = max((int)edx.split.num_counters_fixed, 3);
- rdmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
-
/*
* Install the hw-cache-events table:
*/
@@ -1499,21 +1496,22 @@ void __init init_hw_perf_counters(void)
pr_cont("%s PMU driver.\n", x86_pmu.name);
if (x86_pmu.num_counters > X86_PMC_MAX_GENERIC) {
- x86_pmu.num_counters = X86_PMC_MAX_GENERIC;
WARN(1, KERN_ERR "hw perf counters %d > max(%d), clipping!",
x86_pmu.num_counters, X86_PMC_MAX_GENERIC);
+ x86_pmu.num_counters = X86_PMC_MAX_GENERIC;
}
perf_counter_mask = (1 << x86_pmu.num_counters) - 1;
perf_max_counters = x86_pmu.num_counters;
if (x86_pmu.num_counters_fixed > X86_PMC_MAX_FIXED) {
- x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED;
WARN(1, KERN_ERR "hw perf counters fixed %d > max(%d), clipping!",
x86_pmu.num_counters_fixed, X86_PMC_MAX_FIXED);
+ x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED;
}
perf_counter_mask |=
((1LL << x86_pmu.num_counters_fixed)-1) << X86_PMC_IDX_FIXED;
+ x86_pmu.intel_ctrl = perf_counter_mask;
perf_counters_lapic_init();
register_die_notifier(&perf_counter_nmi_notifier);
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 95ea5fa7d44..c8405718a4c 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -22,6 +22,7 @@
#include "dumpstack.h"
int panic_on_unrecovered_nmi;
+int panic_on_io_nmi;
unsigned int code_bytes = 64;
int kstack_depth_to_print = 3 * STACKSLOTS_PER_LINE;
static int die_counter;
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 7271fa33d79..c4ca89d9aaf 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -1383,6 +1383,8 @@ static unsigned long ram_alignment(resource_size_t pos)
return 32*1024*1024;
}
+#define MAX_RESOURCE_SIZE ((resource_size_t)-1)
+
void __init e820_reserve_resources_late(void)
{
int i;
@@ -1400,17 +1402,19 @@ void __init e820_reserve_resources_late(void)
* avoid stolen RAM:
*/
for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *entry = &e820_saved.map[i];
- resource_size_t start, end;
+ struct e820entry *entry = &e820.map[i];
+ u64 start, end;
if (entry->type != E820_RAM)
continue;
start = entry->addr + entry->size;
- end = round_up(start, ram_alignment(start));
- if (start == end)
+ end = round_up(start, ram_alignment(start)) - 1;
+ if (end > MAX_RESOURCE_SIZE)
+ end = MAX_RESOURCE_SIZE;
+ if (start >= end)
continue;
- reserve_region_with_split(&iomem_resource, start,
- end - 1, "RAM buffer");
+ reserve_region_with_split(&iomem_resource, start, end,
+ "RAM buffer");
}
}
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 47630479b06..1a041bcf506 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -211,11 +211,11 @@ static __init int iommu_setup(char *p)
#ifdef CONFIG_SWIOTLB
if (!strncmp(p, "soft", 4))
swiotlb = 1;
+#endif
if (!strncmp(p, "pt", 2)) {
iommu_pass_through = 1;
return 1;
}
-#endif
gart_parse_options(p);
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index be5ae80f897..de2cab13284 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -289,6 +289,20 @@ void * __init extend_brk(size_t size, size_t align)
return ret;
}
+#ifdef CONFIG_X86_64
+static void __init init_gbpages(void)
+{
+ if (direct_gbpages && cpu_has_gbpages)
+ printk(KERN_INFO "Using GB pages for direct mapping\n");
+ else
+ direct_gbpages = 0;
+}
+#else
+static inline void init_gbpages(void)
+{
+}
+#endif
+
static void __init reserve_brk(void)
{
if (_brk_end > _brk_start)
@@ -871,6 +885,8 @@ void __init setup_arch(char **cmdline_p)
reserve_brk();
+ init_gbpages();
+
/* max_pfn_mapped is updated here */
max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT);
max_pfn_mapped = max_low_pfn_mapped;
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 9c3f0823e6a..29a3eef7cf4 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -124,7 +124,7 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
}
/*
- * Remap allocator
+ * Large page remap allocator
*
* This allocator uses PMD page as unit. A PMD page is allocated for
* each cpu and each is remapped into vmalloc area using PMD mapping.
@@ -137,105 +137,185 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
* better than only using 4k mappings while still being NUMA friendly.
*/
#ifdef CONFIG_NEED_MULTIPLE_NODES
-static size_t pcpur_size __initdata;
-static void **pcpur_ptrs __initdata;
+struct pcpul_ent {
+ unsigned int cpu;
+ void *ptr;
+};
+
+static size_t pcpul_size;
+static struct pcpul_ent *pcpul_map;
+static struct vm_struct pcpul_vm;
-static struct page * __init pcpur_get_page(unsigned int cpu, int pageno)
+static struct page * __init pcpul_get_page(unsigned int cpu, int pageno)
{
size_t off = (size_t)pageno << PAGE_SHIFT;
- if (off >= pcpur_size)
+ if (off >= pcpul_size)
return NULL;
- return virt_to_page(pcpur_ptrs[cpu] + off);
+ return virt_to_page(pcpul_map[cpu].ptr + off);
}
-static ssize_t __init setup_pcpu_remap(size_t static_size)
+static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
{
- static struct vm_struct vm;
- size_t ptrs_size, dyn_size;
+ size_t map_size, dyn_size;
unsigned int cpu;
+ int i, j;
ssize_t ret;
- /*
- * If large page isn't supported, there's no benefit in doing
- * this. Also, on non-NUMA, embedding is better.
- *
- * NOTE: disabled for now.
- */
- if (true || !cpu_has_pse || !pcpu_need_numa())
+ if (!chosen) {
+ size_t vm_size = VMALLOC_END - VMALLOC_START;
+ size_t tot_size = num_possible_cpus() * PMD_SIZE;
+
+ /* on non-NUMA, embedding is better */
+ if (!pcpu_need_numa())
+ return -EINVAL;
+
+ /* don't consume more than 20% of vmalloc area */
+ if (tot_size > vm_size / 5) {
+ pr_info("PERCPU: too large chunk size %zuMB for "
+ "large page remap\n", tot_size >> 20);
+ return -EINVAL;
+ }
+ }
+
+ /* need PSE */
+ if (!cpu_has_pse) {
+ pr_warning("PERCPU: lpage allocator requires PSE\n");
return -EINVAL;
+ }
/*
* Currently supports only single page. Supporting multiple
* pages won't be too difficult if it ever becomes necessary.
*/
- pcpur_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
+ pcpul_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
PERCPU_DYNAMIC_RESERVE);
- if (pcpur_size > PMD_SIZE) {
+ if (pcpul_size > PMD_SIZE) {
pr_warning("PERCPU: static data is larger than large page, "
"can't use large page\n");
return -EINVAL;
}
- dyn_size = pcpur_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
+ dyn_size = pcpul_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
/* allocate pointer array and alloc large pages */
- ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0]));
- pcpur_ptrs = alloc_bootmem(ptrs_size);
+ map_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpul_map[0]));
+ pcpul_map = alloc_bootmem(map_size);
for_each_possible_cpu(cpu) {
- pcpur_ptrs[cpu] = pcpu_alloc_bootmem(cpu, PMD_SIZE, PMD_SIZE);
- if (!pcpur_ptrs[cpu])
+ pcpul_map[cpu].cpu = cpu;
+ pcpul_map[cpu].ptr = pcpu_alloc_bootmem(cpu, PMD_SIZE,
+ PMD_SIZE);
+ if (!pcpul_map[cpu].ptr) {
+ pr_warning("PERCPU: failed to allocate large page "
+ "for cpu%u\n", cpu);
goto enomem;
+ }
/*
- * Only use pcpur_size bytes and give back the rest.
+ * Only use pcpul_size bytes and give back the rest.
*
* Ingo: The 2MB up-rounding bootmem is needed to make
* sure the partial 2MB page is still fully RAM - it's
* not well-specified to have a PAT-incompatible area
* (unmapped RAM, device memory, etc.) in that hole.
*/
- free_bootmem(__pa(pcpur_ptrs[cpu] + pcpur_size),
- PMD_SIZE - pcpur_size);
+ free_bootmem(__pa(pcpul_map[cpu].ptr + pcpul_size),
+ PMD_SIZE - pcpul_size);
- memcpy(pcpur_ptrs[cpu], __per_cpu_load, static_size);
+ memcpy(pcpul_map[cpu].ptr, __per_cpu_load, static_size);
}
/* allocate address and map */
- vm.flags = VM_ALLOC;
- vm.size = num_possible_cpus() * PMD_SIZE;
- vm_area_register_early(&vm, PMD_SIZE);
+ pcpul_vm.flags = VM_ALLOC;
+ pcpul_vm.size = num_possible_cpus() * PMD_SIZE;
+ vm_area_register_early(&pcpul_vm, PMD_SIZE);
for_each_possible_cpu(cpu) {
- pmd_t *pmd;
+ pmd_t *pmd, pmd_v;
- pmd = populate_extra_pmd((unsigned long)vm.addr
- + cpu * PMD_SIZE);
- set_pmd(pmd, pfn_pmd(page_to_pfn(virt_to_page(pcpur_ptrs[cpu])),
- PAGE_KERNEL_LARGE));
+ pmd = populate_extra_pmd((unsigned long)pcpul_vm.addr +
+ cpu * PMD_SIZE);
+ pmd_v = pfn_pmd(page_to_pfn(virt_to_page(pcpul_map[cpu].ptr)),
+ PAGE_KERNEL_LARGE);
+ set_pmd(pmd, pmd_v);
}
/* we're ready, commit */
pr_info("PERCPU: Remapped at %p with large pages, static data "
- "%zu bytes\n", vm.addr, static_size);
+ "%zu bytes\n", pcpul_vm.addr, static_size);
- ret = pcpu_setup_first_chunk(pcpur_get_page, static_size,
+ ret = pcpu_setup_first_chunk(pcpul_get_page, static_size,
PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
- PMD_SIZE, vm.addr, NULL);
- goto out_free_ar;
+ PMD_SIZE, pcpul_vm.addr, NULL);
+
+ /* sort pcpul_map array for pcpu_lpage_remapped() */
+ for (i = 0; i < num_possible_cpus() - 1; i++)
+ for (j = i + 1; j < num_possible_cpus(); j++)
+ if (pcpul_map[i].ptr > pcpul_map[j].ptr) {
+ struct pcpul_ent tmp = pcpul_map[i];
+ pcpul_map[i] = pcpul_map[j];
+ pcpul_map[j] = tmp;
+ }
+
+ return ret;
enomem:
for_each_possible_cpu(cpu)
- if (pcpur_ptrs[cpu])
- free_bootmem(__pa(pcpur_ptrs[cpu]), PMD_SIZE);
- ret = -ENOMEM;
-out_free_ar:
- free_bootmem(__pa(pcpur_ptrs), ptrs_size);
- return ret;
+ if (pcpul_map[cpu].ptr)
+ free_bootmem(__pa(pcpul_map[cpu].ptr), pcpul_size);
+ free_bootmem(__pa(pcpul_map), map_size);
+ return -ENOMEM;
+}
+
+/**
+ * pcpu_lpage_remapped - determine whether a kaddr is in pcpul recycled area
+ * @kaddr: the kernel address in question
+ *
+ * Determine whether @kaddr falls in the pcpul recycled area. This is
+ * used by pageattr to detect VM aliases and break up the pcpu PMD
+ * mapping such that the same physical page is not mapped under
+ * different attributes.
+ *
+ * The recycled area is always at the tail of a partially used PMD
+ * page.
+ *
+ * RETURNS:
+ * Address of corresponding remapped pcpu address if match is found;
+ * otherwise, NULL.
+ */
+void *pcpu_lpage_remapped(void *kaddr)
+{
+ void *pmd_addr = (void *)((unsigned long)kaddr & PMD_MASK);
+ unsigned long offset = (unsigned long)kaddr & ~PMD_MASK;
+ int left = 0, right = num_possible_cpus() - 1;
+ int pos;
+
+ /* pcpul in use at all? */
+ if (!pcpul_map)
+ return NULL;
+
+ /* okay, perform binary search */
+ while (left <= right) {
+ pos = (left + right) / 2;
+
+ if (pcpul_map[pos].ptr < pmd_addr)
+ left = pos + 1;
+ else if (pcpul_map[pos].ptr > pmd_addr)
+ right = pos - 1;
+ else {
+ /* it shouldn't be in the area for the first chunk */
+ WARN_ON(offset < pcpul_size);
+
+ return pcpul_vm.addr +
+ pcpul_map[pos].cpu * PMD_SIZE + offset;
+ }
+ }
+
+ return NULL;
}
#else
-static ssize_t __init setup_pcpu_remap(size_t static_size)
+static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
{
return -EINVAL;
}
@@ -249,7 +329,7 @@ static ssize_t __init setup_pcpu_remap(size_t static_size)
* mapping so that it can use PMD mapping without additional TLB
* pressure.
*/
-static ssize_t __init setup_pcpu_embed(size_t static_size)
+static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen)
{
size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
@@ -258,7 +338,7 @@ static ssize_t __init setup_pcpu_embed(size_t static_size)
* this. Also, embedding allocation doesn't play well with
* NUMA.
*/
- if (!cpu_has_pse || pcpu_need_numa())
+ if (!chosen && (!cpu_has_pse || pcpu_need_numa()))
return -EINVAL;
return pcpu_embed_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
@@ -308,8 +388,11 @@ static ssize_t __init setup_pcpu_4k(size_t static_size)
void *ptr;
ptr = pcpu_alloc_bootmem(cpu, PAGE_SIZE, PAGE_SIZE);
- if (!ptr)
+ if (!ptr) {
+ pr_warning("PERCPU: failed to allocate "
+ "4k page for cpu%u\n", cpu);
goto enomem;
+ }
memcpy(ptr, __per_cpu_load + i * PAGE_SIZE, PAGE_SIZE);
pcpu4k_pages[j++] = virt_to_page(ptr);
@@ -333,6 +416,16 @@ out_free_ar:
return ret;
}
+/* for explicit first chunk allocator selection */
+static char pcpu_chosen_alloc[16] __initdata;
+
+static int __init percpu_alloc_setup(char *str)
+{
+ strncpy(pcpu_chosen_alloc, str, sizeof(pcpu_chosen_alloc) - 1);
+ return 0;
+}
+early_param("percpu_alloc", percpu_alloc_setup);
+
static inline void setup_percpu_segment(int cpu)
{
#ifdef CONFIG_X86_32
@@ -346,11 +439,6 @@ static inline void setup_percpu_segment(int cpu)
#endif
}
-/*
- * Great future plan:
- * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
- * Always point %gs to its beginning
- */
void __init setup_per_cpu_areas(void)
{
size_t static_size = __per_cpu_end - __per_cpu_start;
@@ -367,9 +455,26 @@ void __init setup_per_cpu_areas(void)
* of large page mappings. Please read comments on top of
* each allocator for details.
*/
- ret = setup_pcpu_remap(static_size);
- if (ret < 0)
- ret = setup_pcpu_embed(static_size);
+ ret = -EINVAL;
+ if (strlen(pcpu_chosen_alloc)) {
+ if (strcmp(pcpu_chosen_alloc, "4k")) {
+ if (!strcmp(pcpu_chosen_alloc, "lpage"))
+ ret = setup_pcpu_lpage(static_size, true);
+ else if (!strcmp(pcpu_chosen_alloc, "embed"))
+ ret = setup_pcpu_embed(static_size, true);
+ else
+ pr_warning("PERCPU: unknown allocator %s "
+ "specified\n", pcpu_chosen_alloc);
+ if (ret < 0)
+ pr_warning("PERCPU: %s allocator failed (%zd), "
+ "falling back to 4k\n",
+ pcpu_chosen_alloc, ret);
+ }
+ } else {
+ ret = setup_pcpu_lpage(static_size, false);
+ if (ret < 0)
+ ret = setup_pcpu_embed(static_size, false);
+ }
if (ret < 0)
ret = setup_pcpu_4k(static_size);
if (ret < 0)
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 124d40c575d..8ccabb8a2f6 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -711,7 +711,6 @@ uv_activation_descriptor_init(int node, int pnode)
unsigned long pa;
unsigned long m;
unsigned long n;
- unsigned long mmr_image;
struct bau_desc *adp;
struct bau_desc *ad2;
@@ -727,12 +726,8 @@ uv_activation_descriptor_init(int node, int pnode)
n = pa >> uv_nshift;
m = pa & uv_mmask;
- mmr_image = uv_read_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE);
- if (mmr_image) {
- uv_write_global_mmr64(pnode, (unsigned long)
- UVH_LB_BAU_SB_DESCRIPTOR_BASE,
- (n << UV_DESC_BASE_PNODE_SHIFT | m));
- }
+ uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE,
+ (n << UV_DESC_BASE_PNODE_SHIFT | m));
/*
* initializing all 8 (UV_ITEMS_PER_DESCRIPTOR) descriptors for each
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index a0f48f5671c..5204332f475 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -346,6 +346,9 @@ io_check_error(unsigned char reason, struct pt_regs *regs)
printk(KERN_EMERG "NMI: IOCK error (debug interrupt?)\n");
show_registers(regs);
+ if (panic_on_io_nmi)
+ panic("NMI IOCK error: Not continuing");
+
/* Re-enable the IOCK line, wait for a few seconds */
reason = (reason & 0xf) | 8;
outb(reason, 0x61);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 5c3d6e81a7d..7030b5f911b 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2157,7 +2157,7 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level)
else
/* 32 bits PSE 4MB page */
context->rsvd_bits_mask[1][1] = rsvd_bits(13, 21);
- context->rsvd_bits_mask[1][0] = ~0ull;
+ context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
break;
case PT32E_ROOT_LEVEL:
context->rsvd_bits_mask[0][2] =
@@ -2170,7 +2170,7 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level)
context->rsvd_bits_mask[1][1] = exb_bit_rsvd |
rsvd_bits(maxphyaddr, 62) |
rsvd_bits(13, 20); /* large page */
- context->rsvd_bits_mask[1][0] = ~0ull;
+ context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
break;
case PT64_ROOT_LEVEL:
context->rsvd_bits_mask[0][3] = exb_bit_rsvd |
@@ -2186,7 +2186,7 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level)
context->rsvd_bits_mask[1][1] = exb_bit_rsvd |
rsvd_bits(maxphyaddr, 51) |
rsvd_bits(13, 20); /* large page */
- context->rsvd_bits_mask[1][0] = ~0ull;
+ context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
break;
}
}
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 258e4591e1c..67785f63539 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -281,7 +281,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
{
unsigned access = gw->pt_access;
struct kvm_mmu_page *shadow_page;
- u64 spte, *sptep;
+ u64 spte, *sptep = NULL;
int direct;
gfn_t table_gfn;
int r;
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index e770bf349ec..356a0ce85c6 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3012,6 +3012,12 @@ static int handle_vmcall(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
return 1;
}
+static int handle_vmx_insn(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ kvm_queue_exception(vcpu, UD_VECTOR);
+ return 1;
+}
+
static int handle_invlpg(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
{
unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
@@ -3198,6 +3204,15 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu,
[EXIT_REASON_HLT] = handle_halt,
[EXIT_REASON_INVLPG] = handle_invlpg,
[EXIT_REASON_VMCALL] = handle_vmcall,
+ [EXIT_REASON_VMCLEAR] = handle_vmx_insn,
+ [EXIT_REASON_VMLAUNCH] = handle_vmx_insn,
+ [EXIT_REASON_VMPTRLD] = handle_vmx_insn,
+ [EXIT_REASON_VMPTRST] = handle_vmx_insn,
+ [EXIT_REASON_VMREAD] = handle_vmx_insn,
+ [EXIT_REASON_VMRESUME] = handle_vmx_insn,
+ [EXIT_REASON_VMWRITE] = handle_vmx_insn,
+ [EXIT_REASON_VMOFF] = handle_vmx_insn,
+ [EXIT_REASON_VMON] = handle_vmx_insn,
[EXIT_REASON_TPR_BELOW_THRESHOLD] = handle_tpr_below_threshold,
[EXIT_REASON_APIC_ACCESS] = handle_apic_access,
[EXIT_REASON_WBINVD] = handle_wbinvd,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 249540f9851..fe5474aec41 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -898,6 +898,7 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
case MSR_VM_HSAVE_PA:
case MSR_P6_EVNTSEL0:
case MSR_P6_EVNTSEL1:
+ case MSR_K7_EVNTSEL0:
data = 0;
break;
case MSR_MTRRcap:
diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index c1b6c232e02..616de4628d6 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -1361,7 +1361,7 @@ static inline int writeback(struct x86_emulate_ctxt *ctxt,
return 0;
}
-void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
+static void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
{
u32 int_shadow = kvm_x86_ops->get_interrupt_shadow(ctxt->vcpu, mask);
/*
diff --git a/arch/x86/lib/delay.c b/arch/x86/lib/delay.c
index f4568605d7d..ff485d36118 100644
--- a/arch/x86/lib/delay.c
+++ b/arch/x86/lib/delay.c
@@ -55,8 +55,10 @@ static void delay_tsc(unsigned long loops)
preempt_disable();
cpu = smp_processor_id();
+ rdtsc_barrier();
rdtscl(bclock);
for (;;) {
+ rdtsc_barrier();
rdtscl(now);
if ((now - bclock) >= loops)
break;
@@ -78,6 +80,7 @@ static void delay_tsc(unsigned long loops)
if (unlikely(cpu != smp_processor_id())) {
loops -= (now - bclock);
cpu = smp_processor_id();
+ rdtsc_barrier();
rdtscl(bclock);
}
}
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index f53b57e4086..47ce9a2ce5e 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -177,20 +177,6 @@ static int __meminit save_mr(struct map_range *mr, int nr_range,
return nr_range;
}
-#ifdef CONFIG_X86_64
-static void __init init_gbpages(void)
-{
- if (direct_gbpages && cpu_has_gbpages)
- printk(KERN_INFO "Using GB pages for direct mapping\n");
- else
- direct_gbpages = 0;
-}
-#else
-static inline void init_gbpages(void)
-{
-}
-#endif
-
/*
* Setup the direct mapping of the physical memory at PAGE_OFFSET.
* This runs before bootmem is initialized and gets pages directly from
@@ -210,9 +196,6 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
printk(KERN_INFO "init_memory_mapping: %016lx-%016lx\n", start, end);
- if (!after_bootmem)
- init_gbpages();
-
#if defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KMEMCHECK)
/*
* For CONFIG_DEBUG_PAGEALLOC, identity mapping will use small pages.
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index c4378f4fd4a..b177652251a 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -598,6 +598,8 @@ void __init paging_init(void)
sparse_memory_present_with_active_regions(MAX_NUMNODES);
sparse_init();
+ /* clear the default setting with node 0 */
+ nodes_clear(node_states[N_NORMAL_MEMORY]);
free_area_init_nodes(max_zone_pfns);
}
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 3cfe9ced8a4..1b734d7a896 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -11,6 +11,7 @@
#include <linux/interrupt.h>
#include <linux/seq_file.h>
#include <linux/debugfs.h>
+#include <linux/pfn.h>
#include <asm/e820.h>
#include <asm/processor.h>
@@ -681,8 +682,9 @@ static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias);
static int cpa_process_alias(struct cpa_data *cpa)
{
struct cpa_data alias_cpa;
- int ret = 0;
- unsigned long temp_cpa_vaddr, vaddr;
+ unsigned long laddr = (unsigned long)__va(cpa->pfn << PAGE_SHIFT);
+ unsigned long vaddr, remapped;
+ int ret;
if (cpa->pfn >= max_pfn_mapped)
return 0;
@@ -706,42 +708,55 @@ static int cpa_process_alias(struct cpa_data *cpa)
PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT)))) {
alias_cpa = *cpa;
- temp_cpa_vaddr = (unsigned long) __va(cpa->pfn << PAGE_SHIFT);
- alias_cpa.vaddr = &temp_cpa_vaddr;
+ alias_cpa.vaddr = &laddr;
alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
-
ret = __change_page_attr_set_clr(&alias_cpa, 0);
+ if (ret)
+ return ret;
}
#ifdef CONFIG_X86_64
- if (ret)
- return ret;
/*
- * No need to redo, when the primary call touched the high
- * mapping already:
- */
- if (within(vaddr, (unsigned long) _text, _brk_end))
- return 0;
-
- /*
- * If the physical address is inside the kernel map, we need
+ * If the primary call didn't touch the high mapping already
+ * and the physical address is inside the kernel map, we need
* to touch the high mapped kernel as well:
*/
- if (!within(cpa->pfn, highmap_start_pfn(), highmap_end_pfn()))
- return 0;
+ if (!within(vaddr, (unsigned long)_text, _brk_end) &&
+ within(cpa->pfn, highmap_start_pfn(), highmap_end_pfn())) {
+ unsigned long temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) +
+ __START_KERNEL_map - phys_base;
+ alias_cpa = *cpa;
+ alias_cpa.vaddr = &temp_cpa_vaddr;
+ alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
- alias_cpa = *cpa;
- temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) + __START_KERNEL_map - phys_base;
- alias_cpa.vaddr = &temp_cpa_vaddr;
- alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
+ /*
+ * The high mapping range is imprecise, so ignore the
+ * return value.
+ */
+ __change_page_attr_set_clr(&alias_cpa, 0);
+ }
+#endif
/*
- * The high mapping range is imprecise, so ignore the return value.
+ * If the PMD page was partially used for per-cpu remapping,
+ * the recycled area needs to be split and modified. Because
+ * the area is always proper subset of a PMD page
+ * cpa->numpages is guaranteed to be 1 for these areas, so
+ * there's no need to loop over and check for further remaps.
*/
- __change_page_attr_set_clr(&alias_cpa, 0);
-#endif
- return ret;
+ remapped = (unsigned long)pcpu_lpage_remapped((void *)laddr);
+ if (remapped) {
+ WARN_ON(cpa->numpages > 1);
+ alias_cpa = *cpa;
+ alias_cpa.vaddr = &remapped;
+ alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
+ ret = __change_page_attr_set_clr(&alias_cpa, 0);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
}
static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias)
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index d277ef1eea5..b3d20b9cac6 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -244,7 +244,7 @@ static void __restore_processor_state(struct saved_context *ctxt)
do_fpu_end();
mtrr_ap_init();
-#ifdef CONFIG_X86_32
+#ifdef CONFIG_X86_OLD_MCE
mcheck_init(&boot_cpu_data);
#endif
}