diff options
Diffstat (limited to 'arch')
44 files changed, 640 insertions, 215 deletions
diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index 32b0c24ab9a..19edcd526ba 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -191,7 +191,7 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) */ save_previous_kprobe(kcb); set_current_kprobe(p, regs, kcb); - p->nmissed++; + kprobes_inc_nmissed_count(p); prepare_singlestep(p, regs); kcb->kprobe_status = KPROBE_REENTER; return 1; diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index d16520da455..9ed449af8e9 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -1338,8 +1338,7 @@ int __cpu_disable(void) if (cpu == 0) return -EBUSY; - /* We enable the timer again on the exit path of the death loop */ - disable_APIC_timer(); + clear_local_APIC(); /* Allow any queued timer interrupts to get serviced */ local_irq_enable(); mdelay(1); diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index c34d1bfc516..f0dffa03fbb 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -650,13 +650,6 @@ fastcall void do_nmi(struct pt_regs * regs, long error_code) cpu = smp_processor_id(); -#ifdef CONFIG_HOTPLUG_CPU - if (!cpu_online(cpu)) { - nmi_exit(); - return; - } -#endif - ++nmi_count(cpu); if (!rcu_dereference(nmi_callback)(regs, cpu)) diff --git a/arch/i386/mm/ioremap.c b/arch/i386/mm/ioremap.c index 5d09de8d1c6..8498b5ac395 100644 --- a/arch/i386/mm/ioremap.c +++ b/arch/i386/mm/ioremap.c @@ -223,9 +223,15 @@ void __iomem *ioremap_nocache (unsigned long phys_addr, unsigned long size) } EXPORT_SYMBOL(ioremap_nocache); +/** + * iounmap - Free a IO remapping + * @addr: virtual address from ioremap_* + * + * Caller must ensure there is only one unmapping for the same pointer. + */ void iounmap(volatile void __iomem *addr) { - struct vm_struct *p; + struct vm_struct *p, *o; if ((void __force *)addr <= high_memory) return; @@ -239,22 +245,37 @@ void iounmap(volatile void __iomem *addr) addr < phys_to_virt(ISA_END_ADDRESS)) return; - write_lock(&vmlist_lock); - p = __remove_vm_area((void *)(PAGE_MASK & (unsigned long __force)addr)); - if (!p) { - printk(KERN_WARNING "iounmap: bad address %p\n", addr); + addr = (volatile void *)(PAGE_MASK & (unsigned long __force)addr); + + /* Use the vm area unlocked, assuming the caller + ensures there isn't another iounmap for the same address + in parallel. Reuse of the virtual address is prevented by + leaving it in the global lists until we're done with it. + cpa takes care of the direct mappings. */ + read_lock(&vmlist_lock); + for (p = vmlist; p; p = p->next) { + if (p->addr == addr) + break; + } + read_unlock(&vmlist_lock); + + if (!p) { + printk("iounmap: bad address %p\n", addr); dump_stack(); - goto out_unlock; + return; } + /* Reset the direct mapping. Can block */ if ((p->flags >> 20) && p->phys_addr < virt_to_phys(high_memory) - 1) { change_page_attr(virt_to_page(__va(p->phys_addr)), p->size >> PAGE_SHIFT, PAGE_KERNEL); global_flush_tlb(); } -out_unlock: - write_unlock(&vmlist_lock); + + /* Finally remove it */ + o = remove_vm_area((void *)addr); + BUG_ON(p != o || o == NULL); kfree(p); } EXPORT_SYMBOL(iounmap); diff --git a/arch/i386/pci/direct.c b/arch/i386/pci/direct.c index 94331d6be7a..e3ac502bf2f 100644 --- a/arch/i386/pci/direct.c +++ b/arch/i386/pci/direct.c @@ -13,7 +13,7 @@ #define PCI_CONF1_ADDRESS(bus, devfn, reg) \ (0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3)) -static int pci_conf1_read(unsigned int seg, unsigned int bus, +int pci_conf1_read(unsigned int seg, unsigned int bus, unsigned int devfn, int reg, int len, u32 *value) { unsigned long flags; @@ -42,7 +42,7 @@ static int pci_conf1_read(unsigned int seg, unsigned int bus, return 0; } -static int pci_conf1_write(unsigned int seg, unsigned int bus, +int pci_conf1_write(unsigned int seg, unsigned int bus, unsigned int devfn, int reg, int len, u32 value) { unsigned long flags; diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c index dfbf80cff83..08a08490121 100644 --- a/arch/i386/pci/mmconfig.c +++ b/arch/i386/pci/mmconfig.c @@ -19,21 +19,25 @@ /* The base address of the last MMCONFIG device accessed */ static u32 mmcfg_last_accessed_device; +static DECLARE_BITMAP(fallback_slots, 32); + /* * Functions for accessing PCI configuration space with MMCONFIG accesses */ -static u32 get_base_addr(unsigned int seg, int bus) +static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn) { int cfg_num = -1; struct acpi_table_mcfg_config *cfg; + if (seg == 0 && bus == 0 && + test_bit(PCI_SLOT(devfn), fallback_slots)) + return 0; + while (1) { ++cfg_num; if (cfg_num >= pci_mmcfg_config_num) { - /* something bad is going on, no cfg table is found. */ - /* so we fall back to the old way we used to do this */ - /* and just rely on the first entry to be correct. */ - return pci_mmcfg_config[0].base_address; + /* Not found - fallback to type 1 */ + return 0; } cfg = &pci_mmcfg_config[cfg_num]; if (cfg->pci_segment_group_number != seg) @@ -44,9 +48,9 @@ static u32 get_base_addr(unsigned int seg, int bus) } } -static inline void pci_exp_set_dev_base(unsigned int seg, int bus, int devfn) +static inline void pci_exp_set_dev_base(unsigned int base, int bus, int devfn) { - u32 dev_base = get_base_addr(seg, bus) | (bus << 20) | (devfn << 12); + u32 dev_base = base | (bus << 20) | (devfn << 12); if (dev_base != mmcfg_last_accessed_device) { mmcfg_last_accessed_device = dev_base; set_fixmap_nocache(FIX_PCIE_MCFG, dev_base); @@ -57,13 +61,18 @@ static int pci_mmcfg_read(unsigned int seg, unsigned int bus, unsigned int devfn, int reg, int len, u32 *value) { unsigned long flags; + u32 base; if (!value || (bus > 255) || (devfn > 255) || (reg > 4095)) return -EINVAL; + base = get_base_addr(seg, bus, devfn); + if (!base) + return pci_conf1_read(seg,bus,devfn,reg,len,value); + spin_lock_irqsave(&pci_config_lock, flags); - pci_exp_set_dev_base(seg, bus, devfn); + pci_exp_set_dev_base(base, bus, devfn); switch (len) { case 1: @@ -86,13 +95,18 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus, unsigned int devfn, int reg, int len, u32 value) { unsigned long flags; + u32 base; if ((bus > 255) || (devfn > 255) || (reg > 4095)) return -EINVAL; + base = get_base_addr(seg, bus, devfn); + if (!base) + return pci_conf1_write(seg,bus,devfn,reg,len,value); + spin_lock_irqsave(&pci_config_lock, flags); - pci_exp_set_dev_base(seg, bus, devfn); + pci_exp_set_dev_base(base, bus, devfn); switch (len) { case 1: @@ -116,6 +130,37 @@ static struct pci_raw_ops pci_mmcfg = { .write = pci_mmcfg_write, }; +/* K8 systems have some devices (typically in the builtin northbridge) + that are only accessible using type1 + Normally this can be expressed in the MCFG by not listing them + and assigning suitable _SEGs, but this isn't implemented in some BIOS. + Instead try to discover all devices on bus 0 that are unreachable using MM + and fallback for them. + We only do this for bus 0/seg 0 */ +static __init void unreachable_devices(void) +{ + int i; + unsigned long flags; + + for (i = 0; i < 32; i++) { + u32 val1; + u32 addr; + + pci_conf1_read(0, 0, PCI_DEVFN(i, 0), 0, 4, &val1); + if (val1 == 0xffffffff) + continue; + + /* Locking probably not needed, but safer */ + spin_lock_irqsave(&pci_config_lock, flags); + addr = get_base_addr(0, 0, PCI_DEVFN(i, 0)); + if (addr != 0) + pci_exp_set_dev_base(addr, 0, PCI_DEVFN(i, 0)); + if (addr == 0 || readl((u32 *)addr) != val1) + set_bit(i, fallback_slots); + spin_unlock_irqrestore(&pci_config_lock, flags); + } +} + static int __init pci_mmcfg_init(void) { if ((pci_probe & PCI_PROBE_MMCONF) == 0) @@ -131,6 +176,8 @@ static int __init pci_mmcfg_init(void) raw_pci_ops = &pci_mmcfg; pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; + unreachable_devices(); + out: return 0; } diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h index 127d53ad16b..f550781ec31 100644 --- a/arch/i386/pci/pci.h +++ b/arch/i386/pci/pci.h @@ -74,3 +74,10 @@ extern spinlock_t pci_config_lock; extern int (*pcibios_enable_irq)(struct pci_dev *dev); extern void (*pcibios_disable_irq)(struct pci_dev *dev); + +extern int pci_conf1_write(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 value); +extern int pci_conf1_read(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 *value); + + diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index b76ce1fe2e7..199eeaf0f4e 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -58,7 +58,7 @@ config IA64_UNCACHED_ALLOCATOR bool select GENERIC_ALLOCATOR -config ZONE_DMA_IS_DMA32 +config DMA_IS_DMA32 bool default y diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index 87cfd31a4a3..e1924cc9687 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc6 -# Tue Aug 16 14:40:41 2005 +# Linux kernel version: 2.6.15-rc4 +# Fri Dec 2 10:33:48 2005 # # @@ -16,6 +16,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -26,6 +27,7 @@ CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_CPUSETS=y +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y @@ -56,11 +58,29 @@ CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y @@ -68,6 +88,7 @@ CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_IA64_UNCACHED_ALLOCATOR=y +CONFIG_ZONE_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set # CONFIG_IA64_DIG is not set # CONFIG_IA64_HP_ZX1 is not set @@ -87,14 +108,10 @@ CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_IA64_L1_CACHE_SHIFT=7 -CONFIG_NUMA=y -CONFIG_VIRTUAL_MEM_MAP=y -CONFIG_HOLES_IN_ZONE=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y # CONFIG_IA64_CYCLONE is not set CONFIG_IOSAPIC=y CONFIG_IA64_SGI_SN_XP=m -CONFIG_FORCE_MAX_ZONEORDER=18 +CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=512 # CONFIG_HOTPLUG_CPU is not set @@ -107,7 +124,17 @@ CONFIG_DISCONTIGMEM_MANUAL=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y -CONFIG_HAVE_DEC_LOCK=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_NUMA=y +CONFIG_VIRTUAL_MEM_MAP=y +CONFIG_HOLES_IN_ZONE=y +CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y @@ -126,28 +153,35 @@ CONFIG_BINFMT_ELF=y # Power management and ACPI # CONFIG_PM=y -CONFIG_ACPI=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set # # ACPI (Advanced Configuration and Power Interface) Support # +CONFIG_ACPI=y # CONFIG_ACPI_BUTTON is not set # CONFIG_ACPI_FAN is not set # CONFIG_ACPI_PROCESSOR is not set CONFIG_ACPI_NUMA=y +CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set # +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# # Bus options (PCI, PCMCIA) # CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -191,8 +225,8 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y CONFIG_IPV6=m @@ -205,6 +239,11 @@ CONFIG_IPV6=m # CONFIG_NETFILTER is not set # +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set @@ -220,8 +259,11 @@ CONFIG_IPV6=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing @@ -230,6 +272,7 @@ CONFIG_IPV6=m # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -244,6 +287,11 @@ CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -275,16 +323,7 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -349,6 +388,7 @@ CONFIG_IDEDMA_AUTO=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -375,11 +415,13 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y -# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=y # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -389,15 +431,19 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set @@ -411,7 +457,6 @@ CONFIG_SCSI_SATA_VITESSE=y # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -# CONFIG_SCSI_QLOGIC_1280_1040 is not set CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA21XX is not set CONFIG_SCSI_QLA22XX=y @@ -451,6 +496,7 @@ CONFIG_DM_MULTIPATH_EMC=m CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_FC=y +CONFIG_FUSION_SAS=y CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m @@ -479,6 +525,10 @@ CONFIG_NETDEVICES=y # CONFIG_ARCNET is not set # +# PHY device support +# + +# # Ethernet (10 or 100Mbit) # # CONFIG_NET_ETHERNET is not set @@ -493,6 +543,7 @@ CONFIG_NETDEVICES=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set CONFIG_TIGON3=y @@ -501,10 +552,10 @@ CONFIG_TIGON3=y # # Ethernet (10000 Mbit) # +CONFIG_CHELSIO_T1=m # CONFIG_IXGB is not set CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set -# CONFIG_2BUFF_MODE is not set # # Token Ring devices @@ -583,6 +634,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set @@ -629,7 +681,8 @@ CONFIG_EFI_RTC=y # # Ftape, the floppy tape device driver # -# CONFIG_AGP is not set +CONFIG_AGP=y +CONFIG_AGP_SGI_TIOCA=y # CONFIG_DRM is not set CONFIG_RAW_DRIVER=m # CONFIG_HPET is not set @@ -641,12 +694,12 @@ CONFIG_MMTIMER=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support # # CONFIG_I2C is not set -# CONFIG_I2C_SENSOR is not set # # Dallas's 1-wire bus @@ -657,12 +710,17 @@ CONFIG_MMTIMER=y # Hardware Monitoring support # # CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set # # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -721,12 +779,15 @@ CONFIG_USB_UHCI_HCD=m # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set @@ -751,9 +812,11 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_MTOUCH is not set # CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices @@ -824,11 +887,13 @@ CONFIG_USB_MON=y # InfiniBand support # CONFIG_INFINIBAND=m -CONFIG_INFINIBAND_USER_VERBS=m +# CONFIG_INFINIBAND_USER_MAD is not set +CONFIG_INFINIBAND_USER_ACCESS=m CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set +CONFIG_INFINIBAND_SRP=m # # SN Devices @@ -858,16 +923,12 @@ CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=y CONFIG_XFS_EXPORT=y -CONFIG_XFS_RT=y CONFIG_XFS_QUOTA=y # CONFIG_XFS_SECURITY is not set CONFIG_XFS_POSIX_ACL=y +CONFIG_XFS_RT=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -878,6 +939,7 @@ CONFIG_QUOTACTL=y CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems @@ -904,13 +966,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -CONFIG_TMPFS_SECURITY=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +CONFIG_RELAYFS_FS=m # # Miscellaneous filesystems @@ -959,6 +1019,7 @@ CONFIG_CIFS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1028,18 +1089,21 @@ CONFIG_NLS_UTF8=y # Library routines # # CONFIG_CRC_CCITT is not set +CONFIG_CRC16=m CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set +CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_GENERIC_ALLOCATOR=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y # -# Profiling support +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking @@ -1048,6 +1112,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=20 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set CONFIG_DEBUG_PREEMPT=y @@ -1056,7 +1121,8 @@ CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set -# CONFIG_KPROBES is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set # CONFIG_IA64_PRINT_HAZARDS is not set @@ -1097,7 +1163,7 @@ CONFIG_CRYPTO_DES=m # CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_TEST is not set # diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index 9bc8bcafc90..b1e8f09e9fd 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc1 -# Wed Sep 14 15:17:57 2005 +# Linux kernel version: 2.6.15-rc4 +# Fri Dec 2 16:06:32 2005 # # @@ -59,17 +59,36 @@ CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ZONE_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set CONFIG_IA64_DIG=y # CONFIG_IA64_HP_ZX1 is not set @@ -82,18 +101,16 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +CONFIG_PGTABLE_3=y +# CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_IA64_L1_CACHE_SHIFT=7 -# CONFIG_NUMA is not set -CONFIG_VIRTUAL_MEM_MAP=y -CONFIG_HOLES_IN_ZONE=y CONFIG_IA64_CYCLONE=y CONFIG_IOSAPIC=y -# CONFIG_IA64_SGI_SN_XP is not set -CONFIG_FORCE_MAX_ZONEORDER=18 +CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=4 CONFIG_HOTPLUG_CPU=y @@ -106,7 +123,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_DEC_LOCK=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_VIRTUAL_MEM_MAP=y +CONFIG_HOLES_IN_ZONE=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y @@ -118,7 +141,6 @@ CONFIG_IA64_PALINFO=y # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y -# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -126,6 +148,7 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y +CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # @@ -226,14 +249,16 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -295,14 +320,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -400,6 +417,7 @@ CONFIG_SCSI_FC_ATTRS=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -409,6 +427,7 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -424,7 +443,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_QLOGIC_FC=y # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set CONFIG_SCSI_QLOGIC_1280=y -# CONFIG_SCSI_QLOGIC_1280_1040 is not set CONFIG_SCSI_QLA2XXX=y CONFIG_SCSI_QLA21XX=m CONFIG_SCSI_QLA22XX=m @@ -463,6 +481,7 @@ CONFIG_DM_ZERO=m CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_FC=y +# CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=y @@ -503,6 +522,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -727,6 +747,7 @@ CONFIG_MAX_RAW_DEVS=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -812,12 +833,15 @@ CONFIG_USB_UHCI_HCD=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1123,9 +1147,10 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # -# Profiling support +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking @@ -1142,7 +1167,8 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set -# CONFIG_KPROBES is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set # CONFIG_IA64_PRINT_HAZARDS is not set diff --git a/arch/ia64/ia32/binfmt_elf32.c b/arch/ia64/ia32/binfmt_elf32.c index a7280d9f6c1..4e7a6a1ec6c 100644 --- a/arch/ia64/ia32/binfmt_elf32.c +++ b/arch/ia64/ia32/binfmt_elf32.c @@ -261,8 +261,6 @@ elf32_set_personality (void) { set_personality(PER_LINUX32); current->thread.map_base = IA32_PAGE_OFFSET/3; - current->thread.task_size = IA32_PAGE_OFFSET; /* use what Linux/x86 uses... */ - set_fs(USER_DS); /* set addr limit for new TASK_SIZE */ } static unsigned long diff --git a/arch/ia64/ia32/ia32priv.h b/arch/ia64/ia32/ia32priv.h index e3e9290e3ff..68ceb4e690c 100644 --- a/arch/ia64/ia32/ia32priv.h +++ b/arch/ia64/ia32/ia32priv.h @@ -305,7 +305,6 @@ struct old_linux32_dirent { #define ELF_DATA ELFDATA2LSB #define ELF_ARCH EM_386 -#define IA32_PAGE_OFFSET 0xc0000000 #define IA32_STACK_TOP IA32_PAGE_OFFSET #define IA32_GATE_OFFSET IA32_PAGE_OFFSET #define IA32_GATE_END IA32_PAGE_OFFSET + PAGE_SIZE diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index 2895d6e6062..89a70400c4f 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -630,7 +630,7 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) */ save_previous_kprobe(kcb); set_current_kprobe(p, kcb); - p->nmissed++; + kprobes_inc_nmissed_count(p); prepare_ss(p, regs); kcb->kprobe_status = KPROBE_REENTER; return 1; diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index 2e33665d9c1..e9904c74d2b 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -721,8 +721,13 @@ flush_thread (void) /* drop floating-point and debug-register state if it exists: */ current->thread.flags &= ~(IA64_THREAD_FPH_VALID | IA64_THREAD_DBG_VALID); ia64_drop_fpu(current); - if (IS_IA32_PROCESS(ia64_task_regs(current))) +#ifdef CONFIG_IA32_SUPPORT + if (IS_IA32_PROCESS(ia64_task_regs(current))) { ia32_drop_partial_page_list(current); + current->thread.task_size = IA32_PAGE_OFFSET; + set_fs(USER_DS); + } +#endif } /* diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c index ca68e6e44a7..1461dc660b4 100644 --- a/arch/ia64/kernel/salinfo.c +++ b/arch/ia64/kernel/salinfo.c @@ -293,7 +293,7 @@ retry: if (file->f_flags & O_NONBLOCK) return -EAGAIN; if (down_interruptible(&data->sem)) - return -ERESTARTSYS; + return -EINTR; } n = data->cpu_check; diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index 0f776b032d3..c87d6d1d581 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -50,8 +50,10 @@ static nodemask_t memory_less_mask __initdata; * To prevent cache aliasing effects, align per-node structures so that they * start at addresses that are strided by node number. */ +#define MAX_NODE_ALIGN_OFFSET (32 * 1024 * 1024) #define NODEDATA_ALIGN(addr, node) \ - ((((addr) + 1024*1024-1) & ~(1024*1024-1)) + (node)*PERCPU_PAGE_SIZE) + ((((addr) + 1024*1024-1) & ~(1024*1024-1)) + \ + (((node)*PERCPU_PAGE_SIZE) & (MAX_NODE_ALIGN_OFFSET - 1))) /** * build_node_maps - callback to setup bootmem structs for each node diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index 05e4ea88998..318087e35b6 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. */ #include <linux/bootmem.h> @@ -147,6 +147,24 @@ sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev, } /* + * sn_pcidev_info_get() - Retrieve the pcidev_info struct for the specified + * device. + */ +inline struct pcidev_info * +sn_pcidev_info_get(struct pci_dev *dev) +{ + struct pcidev_info *pcidev; + + list_for_each_entry(pcidev, + &(SN_PCI_CONTROLLER(dev)->pcidev_info), pdi_list) { + if (pcidev->pdi_linux_pcidev == dev) { + return pcidev; + } + } + return NULL; +} + +/* * sn_fixup_ionodes() - This routine initializes the HUB data strcuture for * each node in the system. */ @@ -229,6 +247,50 @@ static void sn_fixup_ionodes(void) } +/* + * sn_pci_window_fixup() - Create a pci_window for each device resource. + * Until ACPI support is added, we need this code + * to setup pci_windows for use by + * pcibios_bus_to_resource(), + * pcibios_resource_to_bus(), etc. + */ +static void +sn_pci_window_fixup(struct pci_dev *dev, unsigned int count, + int64_t * pci_addrs) +{ + struct pci_controller *controller = PCI_CONTROLLER(dev->bus); + unsigned int i; + unsigned int idx; + unsigned int new_count; + struct pci_window *new_window; + + if (count == 0) + return; + idx = controller->windows; + new_count = controller->windows + count; + new_window = kcalloc(new_count, sizeof(struct pci_window), GFP_KERNEL); + if (new_window == NULL) + BUG(); + if (controller->window) { + memcpy(new_window, controller->window, + sizeof(struct pci_window) * controller->windows); + kfree(controller->window); + } + + /* Setup a pci_window for each device resource. */ + for (i = 0; i <= PCI_ROM_RESOURCE; i++) { + if (pci_addrs[i] == -1) + continue; + + new_window[idx].offset = dev->resource[i].start - pci_addrs[i]; + new_window[idx].resource = dev->resource[i]; + idx++; + } + + controller->windows = new_count; + controller->window = new_window; +} + void sn_pci_unfixup_slot(struct pci_dev *dev) { struct pci_dev *host_pci_dev = SN_PCIDEV_INFO(dev)->host_pci_dev; @@ -246,21 +308,23 @@ void sn_pci_unfixup_slot(struct pci_dev *dev) */ void sn_pci_fixup_slot(struct pci_dev *dev) { + unsigned int count = 0; int idx; int segment = pci_domain_nr(dev->bus); int status = 0; struct pcibus_bussoft *bs; struct pci_bus *host_pci_bus; struct pci_dev *host_pci_dev; + struct pcidev_info *pcidev_info; + int64_t pci_addrs[PCI_ROM_RESOURCE + 1]; struct sn_irq_info *sn_irq_info; unsigned long size; unsigned int bus_no, devfn; pci_dev_get(dev); /* for the sysdata pointer */ - dev->sysdata = kmalloc(sizeof(struct pcidev_info), GFP_KERNEL); - if (SN_PCIDEV_INFO(dev) <= 0) + pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL); + if (pcidev_info <= 0) BUG(); /* Cannot afford to run out of memory */ - memset(SN_PCIDEV_INFO(dev), 0, sizeof(struct pcidev_info)); sn_irq_info = kmalloc(sizeof(struct sn_irq_info), GFP_KERNEL); if (sn_irq_info <= 0) @@ -270,22 +334,34 @@ void sn_pci_fixup_slot(struct pci_dev *dev) /* Call to retrieve pci device information needed by kernel. */ status = sal_get_pcidev_info((u64) segment, (u64) dev->bus->number, dev->devfn, - (u64) __pa(SN_PCIDEV_INFO(dev)), + (u64) __pa(pcidev_info), (u64) __pa(sn_irq_info)); if (status) BUG(); /* Cannot get platform pci device information */ + /* Add pcidev_info to list in sn_pci_controller struct */ + list_add_tail(&pcidev_info->pdi_list, + &(SN_PCI_CONTROLLER(dev->bus)->pcidev_info)); + /* Copy over PIO Mapped Addresses */ for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) { unsigned long start, end, addr; - if (!SN_PCIDEV_INFO(dev)->pdi_pio_mapped_addr[idx]) + if (!pcidev_info->pdi_pio_mapped_addr[idx]) { + pci_addrs[idx] = -1; continue; + } start = dev->resource[idx].start; end = dev->resource[idx].end; size = end - start; - addr = SN_PCIDEV_INFO(dev)->pdi_pio_mapped_addr[idx]; + if (size == 0) { + pci_addrs[idx] = -1; + continue; + } + pci_addrs[idx] = start; + count++; + addr = pcidev_info->pdi_pio_mapped_addr[idx]; addr = ((addr << 4) >> 4) | __IA64_UNCACHED_OFFSET; dev->resource[idx].start = addr; dev->resource[idx].end = addr + size; @@ -294,23 +370,27 @@ void sn_pci_fixup_slot(struct pci_dev *dev) else dev->resource[idx].parent = &iomem_resource; } + /* Create a pci_window in the pci_controller struct for + * each device resource. + */ + if (count > 0) + sn_pci_window_fixup(dev, count, pci_addrs); /* * Using the PROMs values for the PCI host bus, get the Linux * PCI host_pci_dev struct and set up host bus linkages */ - bus_no = (SN_PCIDEV_INFO(dev)->pdi_slot_host_handle >> 32) & 0xff; - devfn = SN_PCIDEV_INFO(dev)->pdi_slot_host_handle & 0xffffffff; + bus_no = (pcidev_info->pdi_slot_host_handle >> 32) & 0xff; + devfn = pcidev_info->pdi_slot_host_handle & 0xffffffff; host_pci_bus = pci_find_bus(segment, bus_no); host_pci_dev = pci_get_slot(host_pci_bus, devfn); - SN_PCIDEV_INFO(dev)->host_pci_dev = host_pci_dev; - SN_PCIDEV_INFO(dev)->pdi_host_pcidev_info = - SN_PCIDEV_INFO(host_pci_dev); - SN_PCIDEV_INFO(dev)->pdi_linux_pcidev = dev; + pcidev_info->host_pci_dev = host_pci_dev; + pcidev_info->pdi_linux_pcidev = dev; + pcidev_info->pdi_host_pcidev_info = SN_PCIDEV_INFO(host_pci_dev); bs = SN_PCIBUS_BUSSOFT(dev->bus); - SN_PCIDEV_INFO(dev)->pdi_pcibus_info = bs; + pcidev_info->pdi_pcibus_info = bs; if (bs && bs->bs_asic_type < PCIIO_ASIC_MAX_TYPES) { SN_PCIDEV_BUSPROVIDER(dev) = sn_pci_provider[bs->bs_asic_type]; @@ -320,11 +400,11 @@ void sn_pci_fixup_slot(struct pci_dev *dev) /* Only set up IRQ stuff if this device has a host bus context */ if (bs && sn_irq_info->irq_irq) { - SN_PCIDEV_INFO(dev)->pdi_sn_irq_info = sn_irq_info; - dev->irq = SN_PCIDEV_INFO(dev)->pdi_sn_irq_info->irq_irq; + pcidev_info->pdi_sn_irq_info = sn_irq_info; + dev->irq = pcidev_info->pdi_sn_irq_info->irq_irq; sn_irq_fixup(dev, sn_irq_info); } else { - SN_PCIDEV_INFO(dev)->pdi_sn_irq_info = NULL; + pcidev_info->pdi_sn_irq_info = NULL; kfree(sn_irq_info); } } @@ -338,6 +418,7 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) int status = 0; int nasid, cnode; struct pci_controller *controller; + struct sn_pci_controller *sn_controller; struct pcibus_bussoft *prom_bussoft_ptr; struct hubdev_info *hubdev_info; void *provider_soft = NULL; @@ -349,10 +430,15 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) return; /*bus # does not exist */ prom_bussoft_ptr = __va(prom_bussoft_ptr); - controller = kzalloc(sizeof(struct pci_controller), GFP_KERNEL); + /* Allocate a sn_pci_controller, which has a pci_controller struct + * as the first member. + */ + sn_controller = kzalloc(sizeof(struct sn_pci_controller), GFP_KERNEL); + if (!sn_controller) + BUG(); + INIT_LIST_HEAD(&sn_controller->pcidev_info); + controller = &sn_controller->pci_controller; controller->segment = segment; - if (!controller) - BUG(); if (bus == NULL) { bus = pci_scan_bus(busnum, &pci_root_ops, controller); @@ -390,6 +476,29 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) } /* + * Setup pci_windows for legacy IO and MEM space. + * (Temporary until ACPI support is in place.) + */ + controller->window = kcalloc(2, sizeof(struct pci_window), GFP_KERNEL); + if (controller->window == NULL) + BUG(); + controller->window[0].offset = prom_bussoft_ptr->bs_legacy_io; + controller->window[0].resource.name = "legacy_io"; + controller->window[0].resource.flags = IORESOURCE_IO; + controller->window[0].resource.start = prom_bussoft_ptr->bs_legacy_io; + controller->window[0].resource.end = + controller->window[0].resource.start + 0xffff; + controller->window[0].resource.parent = &ioport_resource; + controller->window[1].offset = prom_bussoft_ptr->bs_legacy_mem; + controller->window[1].resource.name = "legacy_mem"; + controller->window[1].resource.flags = IORESOURCE_MEM; + controller->window[1].resource.start = prom_bussoft_ptr->bs_legacy_mem; + controller->window[1].resource.end = + controller->window[1].resource.start + (1024 * 1024) - 1; + controller->window[1].resource.parent = &iomem_resource; + controller->windows = 2; + + /* * Generic bus fixup goes here. Don't reference prom_bussoft_ptr * after this point. */ @@ -421,7 +530,7 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) error_return: - kfree(controller); + kfree(sn_controller); return; } @@ -434,7 +543,7 @@ void sn_bus_store_sysdata(struct pci_dev *dev) dev_dbg(dev, "%s: out of memory!\n", __FUNCTION__); return; } - element->sysdata = dev->sysdata; + element->sysdata = SN_PCIDEV_INFO(dev); list_add(&element->entry, &sn_sysdata_list); } diff --git a/arch/ia64/sn/kernel/sn2/ptc_deadlock.S b/arch/ia64/sn/kernel/sn2/ptc_deadlock.S index 3fa95065a44..bebbcc4f8dd 100644 --- a/arch/ia64/sn/kernel/sn2/ptc_deadlock.S +++ b/arch/ia64/sn/kernel/sn2/ptc_deadlock.S @@ -39,9 +39,13 @@ sn2_ptc_deadlock_recovery_core: mov r8=r0 1: + cmp.ne p8,p9=r0,ptc1 // Test for shub type (ptc1 non-null on shub1) + // p8 = 1 if shub1, p9 = 1 if shub2 + add scr2=ALIAS_OFFSET,piowc // Address of WRITE_STATUS alias register - ;; - ld8.acq scr1=[scr2];; + mov scr1=7;; // Clear DEADLOCK, WRITE_ERROR, MULTI_WRITE_ERROR +(p8) st8.rel [scr2]=scr1;; +(p9) ld8.acq scr1=[scr2];; 5: ld8.acq scr1=[piowc];; // Wait for PIOs to complete. hint @pause diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 3a49036e0ae..4ee91c9a556 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -67,8 +67,8 @@ unsigned long setup_zero_pages(void) page = virt_to_page(empty_zero_page); while (page < virt_to_page(empty_zero_page + (PAGE_SIZE << order))) { - set_bit(PG_reserved, &page->flags); - reset_page_mapcount(page); + SetPageReserved(page); + set_page_count(page, 1); page++; } diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index bb2efdd566a..db93dbc0e21 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -227,7 +227,7 @@ config SMP If you don't know what to do here, say N. config NR_CPUS - int "Maximum number of CPUs (2-32)" + int "Maximum number of CPUs (2-128)" range 2 128 depends on SMP default "32" if PPC64 diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index 511af54e623..5368f9c2e6b 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -177,7 +177,7 @@ static inline int kprobe_handler(struct pt_regs *regs) save_previous_kprobe(kcb); set_current_kprobe(p, regs, kcb); kcb->kprobe_saved_msr = regs->msr; - p->nmissed++; + kprobes_inc_nmissed_count(p); prepare_singlestep(p, regs); kcb->kprobe_status = KPROBE_REENTER; return 1; diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 608fee7c7e2..e3fb78397dc 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -102,7 +102,15 @@ int boot_cpuid_phys = 0; dev_t boot_dev; u64 ppc64_pft_size; -struct ppc64_caches ppc64_caches; +/* Pick defaults since we might want to patch instructions + * before we've read this from the device tree. + */ +struct ppc64_caches ppc64_caches = { + .dline_size = 0x80, + .log_dline_size = 7, + .iline_size = 0x80, + .log_iline_size = 7 +}; EXPORT_SYMBOL_GPL(ppc64_caches); /* diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 706e8a63ced..a33583f3b0e 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -601,7 +601,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) /* Handle hugepage regions */ if (unlikely(in_hugepage_area(mm->context, ea))) { DBG_LOW(" -> huge page !\n"); - return hash_huge_page(mm, access, ea, vsid, local); + return hash_huge_page(mm, access, ea, vsid, local, trap); } /* Get PTE and page size from page tables */ diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 6bc9dbad7de..54131b877da 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -148,43 +148,63 @@ int is_aligned_hugepage_range(unsigned long addr, unsigned long len) return 0; } +struct slb_flush_info { + struct mm_struct *mm; + u16 newareas; +}; + static void flush_low_segments(void *parm) { - u16 areas = (unsigned long) parm; + struct slb_flush_info *fi = parm; unsigned long i; - asm volatile("isync" : : : "memory"); + BUILD_BUG_ON((sizeof(fi->newareas)*8) != NUM_LOW_AREAS); + + if (current->active_mm != fi->mm) + return; + + /* Only need to do anything if this CPU is working in the same + * mm as the one which has changed */ - BUILD_BUG_ON((sizeof(areas)*8) != NUM_LOW_AREAS); + /* update the paca copy of the context struct */ + get_paca()->context = current->active_mm->context; + asm volatile("isync" : : : "memory"); for (i = 0; i < NUM_LOW_AREAS; i++) { - if (! (areas & (1U << i))) + if (! (fi->newareas & (1U << i))) continue; asm volatile("slbie %0" : : "r" ((i << SID_SHIFT) | SLBIE_C)); } - asm volatile("isync" : : : "memory"); } static void flush_high_segments(void *parm) { - u16 areas = (unsigned long) parm; + struct slb_flush_info *fi = parm; unsigned long i, j; - asm volatile("isync" : : : "memory"); - BUILD_BUG_ON((sizeof(areas)*8) != NUM_HIGH_AREAS); + BUILD_BUG_ON((sizeof(fi->newareas)*8) != NUM_HIGH_AREAS); + if (current->active_mm != fi->mm) + return; + + /* Only need to do anything if this CPU is working in the same + * mm as the one which has changed */ + + /* update the paca copy of the context struct */ + get_paca()->context = current->active_mm->context; + + asm volatile("isync" : : : "memory"); for (i = 0; i < NUM_HIGH_AREAS; i++) { - if (! (areas & (1U << i))) + if (! (fi->newareas & (1U << i))) continue; for (j = 0; j < (1UL << (HTLB_AREA_SHIFT-SID_SHIFT)); j++) asm volatile("slbie %0" :: "r" (((i << HTLB_AREA_SHIFT) - + (j << SID_SHIFT)) | SLBIE_C)); + + (j << SID_SHIFT)) | SLBIE_C)); } - asm volatile("isync" : : : "memory"); } @@ -229,6 +249,7 @@ static int prepare_high_area_for_htlb(struct mm_struct *mm, unsigned long area) static int open_low_hpage_areas(struct mm_struct *mm, u16 newareas) { unsigned long i; + struct slb_flush_info fi; BUILD_BUG_ON((sizeof(newareas)*8) != NUM_LOW_AREAS); BUILD_BUG_ON((sizeof(mm->context.low_htlb_areas)*8) != NUM_LOW_AREAS); @@ -244,19 +265,20 @@ static int open_low_hpage_areas(struct mm_struct *mm, u16 newareas) mm->context.low_htlb_areas |= newareas; - /* update the paca copy of the context struct */ - get_paca()->context = mm->context; - /* the context change must make it to memory before the flush, * so that further SLB misses do the right thing. */ mb(); - on_each_cpu(flush_low_segments, (void *)(unsigned long)newareas, 0, 1); + + fi.mm = mm; + fi.newareas = newareas; + on_each_cpu(flush_low_segments, &fi, 0, 1); return 0; } static int open_high_hpage_areas(struct mm_struct *mm, u16 newareas) { + struct slb_flush_info fi; unsigned long i; BUILD_BUG_ON((sizeof(newareas)*8) != NUM_HIGH_AREAS); @@ -280,7 +302,10 @@ static int open_high_hpage_areas(struct mm_struct *mm, u16 newareas) /* the context change must make it to memory before the flush, * so that further SLB misses do the right thing. */ mb(); - on_each_cpu(flush_high_segments, (void *)(unsigned long)newareas, 0, 1); + + fi.mm = mm; + fi.newareas = newareas; + on_each_cpu(flush_high_segments, &fi, 0, 1); return 0; } @@ -639,8 +664,36 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, return -ENOMEM; } +/* + * Called by asm hashtable.S for doing lazy icache flush + */ +static unsigned int hash_huge_page_do_lazy_icache(unsigned long rflags, + pte_t pte, int trap) +{ + struct page *page; + int i; + + if (!pfn_valid(pte_pfn(pte))) + return rflags; + + page = pte_page(pte); + + /* page is dirty */ + if (!test_bit(PG_arch_1, &page->flags) && !PageReserved(page)) { + if (trap == 0x400) { + for (i = 0; i < (HPAGE_SIZE / PAGE_SIZE); i++) + __flush_dcache_icache(page_address(page+i)); + set_bit(PG_arch_1, &page->flags); + } else { + rflags |= HPTE_R_N; + } + } + return rflags; +} + int hash_huge_page(struct mm_struct *mm, unsigned long access, - unsigned long ea, unsigned long vsid, int local) + unsigned long ea, unsigned long vsid, int local, + unsigned long trap) { pte_t *ptep; unsigned long old_pte, new_pte; @@ -691,6 +744,11 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access, rflags = 0x2 | (!(new_pte & _PAGE_RW)); /* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */ rflags |= ((new_pte & _PAGE_EXEC) ? 0 : HPTE_R_N); + if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) + /* No CPU has hugepages but lacks no execute, so we + * don't need to worry about that case */ + rflags = hash_huge_page_do_lazy_icache(rflags, __pte(old_pte), + trap); /* Check if pte already has an hpte (case 2) */ if (unlikely(old_pte & _PAGE_HASHPTE)) { @@ -703,7 +761,8 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access, slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; slot += (old_pte & _PAGE_F_GIX) >> 12; - if (ppc_md.hpte_updatepp(slot, rflags, va, 1, local) == -1) + if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_huge_psize, + local) == -1) old_pte &= ~_PAGE_HPTEFLAGS; } diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index f72cf87364c..ba7a3055a9f 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -125,7 +125,7 @@ void __init get_region(unsigned int nid, unsigned long *start_pfn, /* We didnt find a matching region, return start/end as 0 */ if (*start_pfn == -1UL) - start_pfn = 0; + *start_pfn = 0; } static inline void map_cpu_to_node(int cpu, int node) diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c index cfbb4e1f966..51e7951414e 100644 --- a/arch/powerpc/mm/stab.c +++ b/arch/powerpc/mm/stab.c @@ -288,11 +288,6 @@ void stab_initialize(unsigned long stab) return; } #endif /* CONFIG_PPC_ISERIES */ -#ifdef CONFIG_PPC_PSERIES - if (platform_is_lpar()) { - plpar_hcall_norets(H_SET_ASR, stabreal); - return; - } -#endif + mtspr(SPRN_ASR, stabreal); } diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index 0d7fa00fcb0..f6e22da2a5d 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -1650,11 +1650,19 @@ void pmac_tweak_clock_spreading(int enable) */ if (macio->type == macio_intrepid) { - if (enable) - UN_OUT(UNI_N_CLOCK_SPREADING, 2); - else - UN_OUT(UNI_N_CLOCK_SPREADING, 0); - mdelay(40); + struct device_node *clock = + of_find_node_by_path("/uni-n@f8000000/hw-clock"); + if (clock && get_property(clock, "platform-do-clockspreading", + NULL)) { + printk(KERN_INFO "%sabling clock spreading on Intrepid" + " ASIC\n", enable ? "En" : "Dis"); + if (enable) + UN_OUT(UNI_N_CLOCK_SPREADING, 2); + else + UN_OUT(UNI_N_CLOCK_SPREADING, 0); + mdelay(40); + } + of_node_put(clock); } while (machine_is_compatible("PowerBook5,2") || @@ -1724,6 +1732,9 @@ void pmac_tweak_clock_spreading(int enable) pmac_low_i2c_close(ui2c); break; } + printk(KERN_INFO "%sabling clock spreading on i2c clock chip\n", + enable ? "En" : "Dis"); + pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_stdsub); rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_write, 0x80, buffer, 9); DBG("write result: %d,", rc); diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index c78f2b290a7..2043659ea7b 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -109,6 +109,9 @@ static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum, u64 rc; union tce_entry tce; + tcenum <<= TCE_PAGE_FACTOR; + npages <<= TCE_PAGE_FACTOR; + tce.te_word = 0; tce.te_rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT; tce.te_rdwr = 1; @@ -143,10 +146,7 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum, union tce_entry tce, *tcep; long l, limit; - tcenum <<= TCE_PAGE_FACTOR; - npages <<= TCE_PAGE_FACTOR; - - if (npages == 1) + if (TCE_PAGE_FACTOR == 0 && npages == 1) return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, direction); @@ -164,6 +164,9 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum, __get_cpu_var(tce_page) = tcep; } + tcenum <<= TCE_PAGE_FACTOR; + npages <<= TCE_PAGE_FACTOR; + tce.te_word = 0; tce.te_rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT; tce.te_rdwr = 1; diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index a50e5f3f396..cf1bc11b334 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -298,18 +298,6 @@ long pSeries_lpar_hpte_insert(unsigned long hpte_group, if (!(vflags & HPTE_V_BOLTED)) DBG_LOW(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r); -#if 1 - { - int i; - for (i=0;i<8;i++) { - unsigned long w0, w1; - plpar_pte_read(0, hpte_group, &w0, &w1); - BUG_ON (HPTE_V_COMPARE(hpte_v, w0) - && (w0 & HPTE_V_VALID)); - } - } -#endif - /* Now fill in the actual HPTE */ /* Set CEC cookie to 0 */ /* Zero page = 0 */ diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 8fa51b0a32d..cc3f64c084c 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -767,14 +767,14 @@ config CPM2 on it (826x, 827x, 8560). config PPC_CHRP - bool " Common Hardware Reference Platform (CHRP) based machines" + bool depends on PPC_MULTIPLATFORM select PPC_I8259 select PPC_INDIRECT_PCI default y config PPC_PMAC - bool " Apple PowerMac based machines" + bool depends on PPC_MULTIPLATFORM select PPC_INDIRECT_PCI default y @@ -785,7 +785,7 @@ config PPC_PMAC64 default y config PPC_PREP - bool " PowerPC Reference Platform (PReP) based machines" + bool depends on PPC_MULTIPLATFORM select PPC_I8259 select PPC_INDIRECT_PCI diff --git a/arch/ppc/kernel/smp.c b/arch/ppc/kernel/smp.c index 43b8fc2ca59..becbfa39755 100644 --- a/arch/ppc/kernel/smp.c +++ b/arch/ppc/kernel/smp.c @@ -301,6 +301,10 @@ void __init smp_prepare_cpus(unsigned int max_cpus) /* Probe platform for CPUs: always linear. */ num_cpus = smp_ops->probe(); + + if (num_cpus < 2) + smp_tb_synchronized = 1; + for (i = 0; i < num_cpus; ++i) cpu_set(i, cpu_possible_map); diff --git a/arch/ppc/platforms/pmac_feature.c b/arch/ppc/platforms/pmac_feature.c index 1e69b059316..6b7b3a15063 100644 --- a/arch/ppc/platforms/pmac_feature.c +++ b/arch/ppc/platforms/pmac_feature.c @@ -1606,11 +1606,19 @@ void pmac_tweak_clock_spreading(int enable) */ if (macio->type == macio_intrepid) { - if (enable) - UN_OUT(UNI_N_CLOCK_SPREADING, 2); - else - UN_OUT(UNI_N_CLOCK_SPREADING, 0); - mdelay(40); + struct device_node *clock = + of_find_node_by_path("/uni-n@f8000000/hw-clock"); + if (clock && get_property(clock, "platform-do-clockspreading", + NULL)) { + printk(KERN_INFO "%sabling clock spreading on Intrepid" + " ASIC\n", enable ? "En" : "Dis"); + if (enable) + UN_OUT(UNI_N_CLOCK_SPREADING, 2); + else + UN_OUT(UNI_N_CLOCK_SPREADING, 0); + mdelay(40); + } + of_node_put(clock); } while (machine_is_compatible("PowerBook5,2") || @@ -1680,6 +1688,8 @@ void pmac_tweak_clock_spreading(int enable) pmac_low_i2c_close(ui2c); break; } + printk(KERN_INFO "%sabling clock spreading on i2c clock chip\n", + enable ? "En" : "Dis"); pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_stdsub); rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_write, 0x80, buffer, 9); DBG("write result: %d,", rc); diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile index dea48f6cff3..4cdbb2d59ed 100644 --- a/arch/sparc/Makefile +++ b/arch/sparc/Makefile @@ -34,7 +34,7 @@ libs-y += arch/sparc/prom/ arch/sparc/lib/ # Renaming is done to avoid confusing pattern matching rules in 2.5.45 (multy-) INIT_Y := $(patsubst %/, %/built-in.o, $(init-y)) CORE_Y := $(core-y) -CORE_Y += kernel/ mm/ fs/ ipc/ security/ crypto/ +CORE_Y += kernel/ mm/ fs/ ipc/ security/ crypto/ block/ CORE_Y := $(patsubst %/, %/built-in.o, $(CORE_Y)) DRIVERS_Y := $(patsubst %/, %/built-in.o, $(drivers-y)) NET_Y := $(patsubst %/, %/built-in.o, $(net-y)) diff --git a/arch/sparc/lib/atomic32.c b/arch/sparc/lib/atomic32.c index cb3cf0f2282..de84f8534ba 100644 --- a/arch/sparc/lib/atomic32.c +++ b/arch/sparc/lib/atomic32.c @@ -66,7 +66,6 @@ int atomic_add_unless(atomic_t *v, int a, int u) return ret != u; } -static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) /* Atomic operations are already serializing */ void atomic_set(atomic_t *v, int i) { diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c index 96bd09b098f..a97b0f0727a 100644 --- a/arch/sparc64/kernel/kprobes.c +++ b/arch/sparc64/kernel/kprobes.c @@ -138,7 +138,7 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) */ save_previous_kprobe(kcb); set_current_kprobe(p, regs, kcb); - p->nmissed++; + kprobes_inc_nmissed_count(p); kcb->kprobe_status = KPROBE_REENTER; prepare_singlestep(p, regs, kcb); return 1; diff --git a/arch/um/include/um_uaccess.h b/arch/um/include/um_uaccess.h index f8760a3f43b..4567f1eeb4a 100644 --- a/arch/um/include/um_uaccess.h +++ b/arch/um/include/um_uaccess.h @@ -17,6 +17,8 @@ #include "uaccess-skas.h" #endif +#include "asm/fixmap.h" + #define __under_task_size(addr, size) \ (((unsigned long) (addr) < TASK_SIZE) && \ (((unsigned long) (addr) + (size)) < TASK_SIZE)) diff --git a/arch/um/kernel/skas/include/uaccess-skas.h b/arch/um/kernel/skas/include/uaccess-skas.h index f611f83ad4f..64516c556cd 100644 --- a/arch/um/kernel/skas/include/uaccess-skas.h +++ b/arch/um/kernel/skas/include/uaccess-skas.h @@ -7,7 +7,6 @@ #define __SKAS_UACCESS_H #include "asm/errno.h" -#include "asm/fixmap.h" /* No SKAS-specific checking. */ #define access_ok_skas(type, addr, size) 0 diff --git a/arch/x86_64/ia32/ia32_binfmt.c b/arch/x86_64/ia32/ia32_binfmt.c index 830feb272ec..2b760d0d9ce 100644 --- a/arch/x86_64/ia32/ia32_binfmt.c +++ b/arch/x86_64/ia32/ia32_binfmt.c @@ -217,8 +217,7 @@ elf_core_copy_task_fpregs(struct task_struct *tsk, struct pt_regs *regs, elf_fpr if (!tsk_used_math(tsk)) return 0; if (!regs) - regs = (struct pt_regs *)tsk->thread.rsp0; - --regs; + regs = ((struct pt_regs *)tsk->thread.rsp0) - 1; if (tsk == current) unlazy_fpu(tsk); set_fs(KERNEL_DS); diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86_64/kernel/kprobes.c index dddeb678b44..afe11f4fbd1 100644 --- a/arch/x86_64/kernel/kprobes.c +++ b/arch/x86_64/kernel/kprobes.c @@ -329,7 +329,7 @@ int __kprobes kprobe_handler(struct pt_regs *regs) */ save_previous_kprobe(kcb); set_current_kprobe(p, regs, kcb); - p->nmissed++; + kprobes_inc_nmissed_count(p); prepare_singlestep(p, regs); kcb->kprobe_status = KPROBE_REENTER; return 1; diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index 683c33f7b96..ecbd7b83acc 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -1181,7 +1181,7 @@ int __cpu_disable(void) if (cpu == 0) return -EBUSY; - disable_APIC_timer(); + clear_local_APIC(); /* * HACK: diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index fdaddc4e528..74102796e5c 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -59,7 +59,7 @@ static int notsc __initdata = 0; unsigned int cpu_khz; /* TSC clocks / usec, not used here */ static unsigned long hpet_period; /* fsecs / HPET clock */ unsigned long hpet_tick; /* HPET clocks / interrupt */ -static int hpet_use_timer; +static int hpet_use_timer; /* Use counter of hpet for time keeping, otherwise PIT */ unsigned long vxtime_hz = PIT_TICK_RATE; int report_lost_ticks; /* command line option */ unsigned long long monotonic_base; @@ -908,12 +908,14 @@ void __init time_init(void) if (!hpet_init()) vxtime_hz = (1000000000000000L + hpet_period / 2) / hpet_period; + else + vxtime.hpet_address = 0; if (hpet_use_timer) { cpu_khz = hpet_calibrate_tsc(); timename = "HPET"; #ifdef CONFIG_X86_PM_TIMER - } else if (pmtmr_ioport) { + } else if (pmtmr_ioport && !vxtime.hpet_address) { vxtime_hz = PM_TIMER_FREQUENCY; timename = "PM"; pit_init(); diff --git a/arch/x86_64/mm/ioremap.c b/arch/x86_64/mm/ioremap.c index ecf7acb5db9..0d260e4492f 100644 --- a/arch/x86_64/mm/ioremap.c +++ b/arch/x86_64/mm/ioremap.c @@ -247,9 +247,15 @@ void __iomem *ioremap_nocache (unsigned long phys_addr, unsigned long size) return __ioremap(phys_addr, size, _PAGE_PCD); } +/** + * iounmap - Free a IO remapping + * @addr: virtual address from ioremap_* + * + * Caller must ensure there is only one unmapping for the same pointer. + */ void iounmap(volatile void __iomem *addr) { - struct vm_struct *p; + struct vm_struct *p, *o; if (addr <= high_memory) return; @@ -257,12 +263,31 @@ void iounmap(volatile void __iomem *addr) addr < phys_to_virt(ISA_END_ADDRESS)) return; - write_lock(&vmlist_lock); - p = __remove_vm_area((void *)((unsigned long)addr & PAGE_MASK)); - if (!p) + addr = (volatile void *)(PAGE_MASK & (unsigned long __force)addr); + /* Use the vm area unlocked, assuming the caller + ensures there isn't another iounmap for the same address + in parallel. Reuse of the virtual address is prevented by + leaving it in the global lists until we're done with it. + cpa takes care of the direct mappings. */ + read_lock(&vmlist_lock); + for (p = vmlist; p; p = p->next) { + if (p->addr == addr) + break; + } + read_unlock(&vmlist_lock); + + if (!p) { printk("iounmap: bad address %p\n", addr); - else if (p->flags >> 20) + dump_stack(); + return; + } + + /* Reset the direct mapping. Can block */ + if (p->flags >> 20) ioremap_change_attr(p->phys_addr, p->size, 0); - write_unlock(&vmlist_lock); + + /* Finally remove it */ + o = remove_vm_area((void *)addr); + BUG_ON(p != o || o == NULL); kfree(p); } diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index a828a01739c..15b67d2760c 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -53,6 +53,8 @@ static int __init populate_memnodemap( int res = -1; unsigned long addr, end; + if (shift >= 64) + return -1; memset(memnodemap, 0xff, sizeof(memnodemap)); for (i = 0; i < numnodes; i++) { addr = nodes[i].start; @@ -65,7 +67,7 @@ static int __init populate_memnodemap( if (memnodemap[addr >> shift] != 0xff) return -1; memnodemap[addr >> shift] = i; - addr += (1 << shift); + addr += (1UL << shift); } while (addr < end); res = 1; } diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index a0838c4a94e..9c4f907e301 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -8,10 +8,13 @@ #include <linux/pci.h> #include <linux/init.h> #include <linux/acpi.h> +#include <linux/bitmap.h> #include "pci.h" #define MMCONFIG_APER_SIZE (256*1024*1024) +static DECLARE_BITMAP(fallback_slots, 32); + /* Static virtual mapping of the MMCONFIG aperture */ struct mmcfg_virt { struct acpi_table_mcfg_config *cfg; @@ -19,7 +22,7 @@ struct mmcfg_virt { }; static struct mmcfg_virt *pci_mmcfg_virt; -static char *get_virt(unsigned int seg, int bus) +static char *get_virt(unsigned int seg, unsigned bus) { int cfg_num = -1; struct acpi_table_mcfg_config *cfg; @@ -27,10 +30,9 @@ static char *get_virt(unsigned int seg, int bus) while (1) { ++cfg_num; if (cfg_num >= pci_mmcfg_config_num) { - /* something bad is going on, no cfg table is found. */ - /* so we fall back to the old way we used to do this */ - /* and just rely on the first entry to be correct. */ - return pci_mmcfg_virt[0].virt; + /* Not found - fall back to type 1. This happens + e.g. on the internal devices of a K8 northbridge. */ + return NULL; } cfg = pci_mmcfg_virt[cfg_num].cfg; if (cfg->pci_segment_group_number != seg) @@ -41,20 +43,30 @@ static char *get_virt(unsigned int seg, int bus) } } -static inline char *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn) +static char *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn) { - - return get_virt(seg, bus) + ((bus << 20) | (devfn << 12)); + char *addr; + if (seg == 0 && bus == 0 && test_bit(PCI_SLOT(devfn), &fallback_slots)) + return NULL; + addr = get_virt(seg, bus); + if (!addr) + return NULL; + return addr + ((bus << 20) | (devfn << 12)); } static int pci_mmcfg_read(unsigned int seg, unsigned int bus, unsigned int devfn, int reg, int len, u32 *value) { - char *addr = pci_dev_base(seg, bus, devfn); + char *addr; + /* Why do we have this when nobody checks it. How about a BUG()!? -AK */ if (unlikely(!value || (bus > 255) || (devfn > 255) || (reg > 4095))) return -EINVAL; + addr = pci_dev_base(seg, bus, devfn); + if (!addr) + return pci_conf1_read(seg,bus,devfn,reg,len,value); + switch (len) { case 1: *value = readb(addr + reg); @@ -73,11 +85,16 @@ static int pci_mmcfg_read(unsigned int seg, unsigned int bus, static int pci_mmcfg_write(unsigned int seg, unsigned int bus, unsigned int devfn, int reg, int len, u32 value) { - char *addr = pci_dev_base(seg, bus, devfn); + char *addr; + /* Why do we have this when nobody checks it. How about a BUG()!? -AK */ if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095))) return -EINVAL; + addr = pci_dev_base(seg, bus, devfn); + if (!addr) + return pci_conf1_write(seg,bus,devfn,reg,len,value); + switch (len) { case 1: writeb(value, addr + reg); @@ -98,6 +115,30 @@ static struct pci_raw_ops pci_mmcfg = { .write = pci_mmcfg_write, }; +/* K8 systems have some devices (typically in the builtin northbridge) + that are only accessible using type1 + Normally this can be expressed in the MCFG by not listing them + and assigning suitable _SEGs, but this isn't implemented in some BIOS. + Instead try to discover all devices on bus 0 that are unreachable using MM + and fallback for them. + We only do this for bus 0/seg 0 */ +static __init void unreachable_devices(void) +{ + int i; + for (i = 0; i < 32; i++) { + u32 val1; + char *addr; + + pci_conf1_read(0, 0, PCI_DEVFN(i,0), 0, 4, &val1); + if (val1 == 0xffffffff) + continue; + addr = pci_dev_base(0, 0, PCI_DEVFN(i, 0)); + if (addr == NULL|| readl(addr) != val1) { + set_bit(i, &fallback_slots); + } + } +} + static int __init pci_mmcfg_init(void) { int i; @@ -128,6 +169,8 @@ static int __init pci_mmcfg_init(void) printk(KERN_INFO "PCI: Using MMCONFIG at %x\n", pci_mmcfg_config[i].base_address); } + unreachable_devices(); + raw_pci_ops = &pci_mmcfg; pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; |