diff options
Diffstat (limited to 'arch')
213 files changed, 14102 insertions, 2545 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a04f507e7f2..e53b0ed9d00 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -180,8 +180,8 @@ config ARCH_AT91 bool "Atmel AT91" select GENERIC_GPIO help - This enables support for systems based on the Atmel AT91RM9200 - and AT91SAM9xxx processors. + This enables support for systems based on the Atmel AT91RM9200, + AT91SAM9 and AT91CAP9 processors. config ARCH_CLPS7500 bool "Cirrus CL-PS7500FE" @@ -217,6 +217,7 @@ config ARCH_EP93XX bool "EP93xx-based" select ARM_AMBA select ARM_VIC + select GENERIC_GPIO help This enables support for the Cirrus EP93xx series of CPUs. @@ -366,6 +367,7 @@ config ARCH_SA1100 select ARCH_DISCONTIGMEM_ENABLE select ARCH_MTD_XIP select GENERIC_GPIO + select GENERIC_TIME help Support for StrongARM 11x0 based boards. @@ -409,6 +411,17 @@ config ARCH_OMAP help Support for TI's OMAP platform (OMAP1 and OMAP2). +config ARCH_MSM7X00A + bool "Qualcomm MSM7X00A" + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + help + Support for Qualcomm MSM7X00A based systems. This runs on the ARM11 + apps processor of the MSM7X00A and depends on a shared memory + interface to the ARM9 modem processor which runs the baseband stack + and controls some vital subsystems (clock and power control, etc). + <http://www.cdmatech.com/products/msm7200_chipset_solution.jsp> + endchoice source "arch/arm/mach-clps711x/Kconfig" @@ -477,6 +490,8 @@ source "arch/arm/mach-davinci/Kconfig" source "arch/arm/mach-ks8695/Kconfig" +source "arch/arm/mach-msm/Kconfig" + # Definitions to make life easier config ARCH_ACORN bool @@ -657,6 +672,7 @@ config HZ default 128 if ARCH_L7200 default 200 if ARCH_EBSA110 || ARCH_S3C2410 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER + default AT91_TIMER_HZ if ARCH_AT91 default 100 config AEABI @@ -951,7 +967,7 @@ config FPE_FASTFPE config VFP bool "VFP-format floating point maths" - depends on CPU_V6 || CPU_ARM926T + depends on CPU_V6 || CPU_ARM926T || CPU_V7 help Say Y to include VFP support code in the kernel. This is needed if your hardware includes a VFP unit. @@ -961,6 +977,18 @@ config VFP Say N if your target does not have VFP hardware. +config VFPv3 + bool + depends on VFP + default y if CPU_V7 + +config NEON + bool "Advanced SIMD (NEON) Extension support" + depends on VFPv3 && CPU_V7 + help + Say Y to include support code for NEON, the ARMv7 Advanced SIMD + Extension. + endmenu menu "Userspace binary formats" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 18101f5f5f2..192ee01a9ba 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -43,6 +43,12 @@ config DEBUG_ERRORS you are concerned with the code size or don't want to see these messages. +config DEBUG_STACK_USAGE + bool "Enable stack utilization instrumentation" + depends on DEBUG_KERNEL + help + Enables the display of the minimum amount of free stack which each + task has ever had available in the sysrq-T output. # These options are only for real kernel hackers who want to get their hands dirty. config DEBUG_LL diff --git a/arch/arm/Kconfig.instrumentation b/arch/arm/Kconfig.instrumentation index 63b8c6d5606..453ad8e15d6 100644 --- a/arch/arm/Kconfig.instrumentation +++ b/arch/arm/Kconfig.instrumentation @@ -43,6 +43,16 @@ config OPROFILE_MPCORE config OPROFILE_ARM11_CORE bool +config KPROBES + bool "Kprobes" + depends on KALLSYMS && MODULES && !UML && !XIP_KERNEL + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". + config MARKERS bool "Activate markers" help diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 35e56c99ad1..dd220d18984 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -139,6 +139,7 @@ endif machine-$(CONFIG_ARCH_KS8695) := ks8695 incdir-$(CONFIG_ARCH_MXC) := mxc machine-$(CONFIG_ARCH_MX3) := mx3 + machine-$(CONFIG_ARCH_MSM7X00A) := msm ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 5fde99f9d9f..de9d9ee5095 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -44,10 +44,6 @@ ifeq ($(CONFIG_PXA_SHARPSL),y) OBJS += head-sharpsl.o endif -ifeq ($(CONFIG_ARCH_AT91RM9200),y) -OBJS += head-at91rm9200.o -endif - ifeq ($(CONFIG_CPU_BIG_ENDIAN),y) ifeq ($(CONFIG_CPU_CP15),y) OBJS += big-endian.o diff --git a/arch/arm/boot/compressed/head-at91rm9200.S b/arch/arm/boot/compressed/head-at91rm9200.S deleted file mode 100644 index 11782ccd93a..00000000000 --- a/arch/arm/boot/compressed/head-at91rm9200.S +++ /dev/null @@ -1,81 +0,0 @@ -/* - * linux/arch/arm/boot/compressed/head-at91rm9200.S - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -#include <asm/mach-types.h> - - .section ".start", "ax" - - @ Atmel AT91RM9200-DK : 262 - mov r3, #(MACH_TYPE_AT91RM9200DK & 0xff) - orr r3, r3, #(MACH_TYPE_AT91RM9200DK & 0xff00) - cmp r7, r3 - beq 99f - - @ Cogent CSB337 : 399 - mov r3, #(MACH_TYPE_CSB337 & 0xff) - orr r3, r3, #(MACH_TYPE_CSB337 & 0xff00) - cmp r7, r3 - beq 99f - - @ Cogent CSB637 : 648 - mov r3, #(MACH_TYPE_CSB637 & 0xff) - orr r3, r3, #(MACH_TYPE_CSB637 & 0xff00) - cmp r7, r3 - beq 99f - - @ Atmel AT91RM9200-EK : 705 - mov r3, #(MACH_TYPE_AT91RM9200EK & 0xff) - orr r3, r3, #(MACH_TYPE_AT91RM9200EK & 0xff00) - cmp r7, r3 - beq 99f - - @ Conitec Carmeva : 769 - mov r3, #(MACH_TYPE_CARMEVA & 0xff) - orr r3, r3, #(MACH_TYPE_CARMEVA & 0xff00) - cmp r7, r3 - beq 99f - - @ KwikByte KB920x : 612 - mov r3, #(MACH_TYPE_KB9200 & 0xff) - orr r3, r3, #(MACH_TYPE_KB9200 & 0xff00) - cmp r7, r3 - beq 99f - - @ Embest ATEB9200 : 923 - mov r3, #(MACH_TYPE_ATEB9200 & 0xff) - orr r3, r3, #(MACH_TYPE_ATEB9200 & 0xff00) - cmp r7, r3 - beq 99f - - @ Sperry-Sun KAFA : 662 - mov r3, #(MACH_TYPE_KAFA & 0xff) - orr r3, r3, #(MACH_TYPE_KAFA & 0xff00) - cmp r7, r3 - beq 99f - - @ picotux 200 : 963 - mov r3, #(MACH_TYPE_PICOTUX2XX & 0xff) - orr r3, r3, #(MACH_TYPE_PICOTUX2XX & 0xff00) - cmp r7, r3 - beq 99f - - @ Ajeco 1ARM : 1075 - mov r3, #(MACH_TYPE_ONEARM & 0xff) - orr r3, r3, #(MACH_TYPE_ONEARM & 0xff00) - cmp r7, r3 - beq 99f - - @ Unknown board, use the AT91RM9200DK board - @ mov r7, #MACH_TYPE_AT91RM9200 - mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff) - orr r7, r7, #(MACH_TYPE_AT91RM9200DK & 0xff00) - -99: diff --git a/arch/arm/common/rtctime.c b/arch/arm/common/rtctime.c index bf1075e1f57..f53bca46e23 100644 --- a/arch/arm/common/rtctime.c +++ b/arch/arm/common/rtctime.c @@ -20,7 +20,6 @@ #include <linux/capability.h> #include <linux/device.h> #include <linux/mutex.h> -#include <linux/rtc.h> #include <asm/rtc.h> #include <asm/semaphore.h> diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig new file mode 100644 index 00000000000..e32e7364812 --- /dev/null +++ b/arch/arm/configs/at91cap9adk_defconfig @@ -0,0 +1,1143 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc8 +# Wed Jan 23 22:55:57 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Atmel AT91 System-on-Chip +# +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +CONFIG_ARCH_AT91CAP9=y +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y + +# +# AT91CAP9 Board Type +# +CONFIG_MACH_AT91CAP9ADK=y + +# +# AT91 Board Options +# +CONFIG_MTD_AT91_DATAFLASH_CARD=y +# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set + +# +# AT91 Feature Selections +# +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_TIMER_HZ=100 + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_LEDS=y +CONFIG_LEDS_TIMER=y +CONFIG_LEDS_CPU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_DATAFLASH=y +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_AT91=y +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_ATMEL_SSC=y + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_ATMEL=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_ATMEL=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +CONFIG_LOGO_LINUX_VGA16=y +# CONFIG_LOGO_LINUX_CLUT224 is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_AT91=y +# CONFIG_MMC_SPI is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig index 970c8c772eb..4264e273202 100644 --- a/arch/arm/configs/collie_defconfig +++ b/arch/arm/configs/collie_defconfig @@ -367,7 +367,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -CONFIG_MTD_OBSOLETE_CHIPS=y CONFIG_MTD_SHARP=y # CONFIG_MTD_XIP is not set diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig index add03c9e555..988b4d13e76 100644 --- a/arch/arm/configs/iop13xx_defconfig +++ b/arch/arm/configs/iop13xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22 -# Thu Jul 19 15:57:52 2007 +# Linux kernel version: 2.6.24-rc5 +# Wed Dec 12 16:11:03 2007 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -26,15 +26,11 @@ CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y @@ -45,10 +41,15 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -69,7 +70,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -130,6 +130,7 @@ CONFIG_ARCH_IOP13XX=y # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -151,9 +152,12 @@ CONFIG_MACH_IQ81340SC=y CONFIG_MACH_IQ81340MC=y # -# IOP13XX IMU Support +# Boot options +# + +# +# Power management # -# CONFIG_IOP_IMU is not set CONFIG_PLAT_IOP=y # @@ -185,10 +189,7 @@ CONFIG_PCI=y CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # @@ -207,6 +208,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 @@ -246,6 +248,7 @@ CONFIG_BINFMT_AOUT=y # Power management options # # CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -285,6 +288,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -324,10 +328,6 @@ CONFIG_IPV6=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -356,6 +356,7 @@ CONFIG_IPV6=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -383,6 +384,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -423,6 +425,7 @@ CONFIG_MTD_PHYSMAP_START=0xfa000000 CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # @@ -463,6 +466,11 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # # SCSI device support @@ -499,12 +507,9 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=y -CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -515,6 +520,7 @@ CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -555,14 +561,8 @@ CONFIG_BLK_DEV_DM=y # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# +# CONFIG_DM_UEVENT is not set # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -577,6 +577,8 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_NET_ETHERNET is not set CONFIG_NETDEV_1000=y @@ -585,6 +587,7 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -592,6 +595,7 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -600,11 +604,14 @@ CONFIG_E1000_NAPI=y CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set # CONFIG_TR is not set # @@ -639,7 +646,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -688,12 +694,10 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y @@ -758,9 +762,9 @@ CONFIG_I2C_IOP3XX=y # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -768,12 +772,13 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -787,14 +792,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -806,29 +814,18 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set +# CONFIG_WATCHDOG is not set # -# LED drivers +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# LED Triggers +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices @@ -840,14 +837,16 @@ CONFIG_DAB=y # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Console display driver support @@ -862,6 +861,7 @@ CONFIG_DUMMY_CONSOLE=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -877,16 +877,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# Real Time Clock -# +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set +CONFIG_DMADEVICES=y # -# DMA Engine support +# DMA Devices # +CONFIG_INTEL_IOP_ADMA=y CONFIG_DMA_ENGINE=y # @@ -895,12 +894,6 @@ CONFIG_DMA_ENGINE=y # CONFIG_NET_DMA is not set # -# DMA Devices -# -# CONFIG_INTEL_IOATDMA is not set -CONFIG_INTEL_IOP_ADMA=y - -# # File systems # CONFIG_EXT2_FS=y @@ -912,7 +905,6 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -952,7 +944,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -969,10 +960,12 @@ CONFIG_ECRYPT_FS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y @@ -981,10 +974,7 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1037,10 +1027,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set @@ -1081,21 +1067,16 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -1104,6 +1085,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set CONFIG_DEBUG_USER=y # @@ -1112,6 +1094,7 @@ CONFIG_DEBUG_USER=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y @@ -1136,6 +1119,7 @@ CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_LRW=y +# CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1150,11 +1134,13 @@ CONFIG_CRYPTO_TEA=y CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_KHAZAD=y CONFIG_CRYPTO_ANUBIS=y +# CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_MICHAEL_MIC=y CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set CONFIG_CRYPTO_HW=y # diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig index 027aef22b4d..83f40d4041a 100644 --- a/arch/arm/configs/iop32x_defconfig +++ b/arch/arm/configs/iop32x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22 -# Thu Jul 19 16:00:36 2007 +# Linux kernel version: 2.6.24-rc5 +# Wed Dec 12 15:49:08 2007 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -26,15 +26,11 @@ CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y @@ -45,9 +41,14 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -69,7 +70,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -130,6 +130,7 @@ CONFIG_ARCH_IOP32X=y # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -153,6 +154,15 @@ CONFIG_ARCH_IQ80321=y CONFIG_ARCH_IQ31244=y CONFIG_MACH_N2100=y CONFIG_IOP3XX_ATU=y +# CONFIG_MACH_EM7210 is not set + +# +# Boot options +# + +# +# Power management +# CONFIG_PLAT_IOP=y # @@ -182,11 +192,8 @@ CONFIG_XSCALE_PMU=y CONFIG_PCI=y CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -205,6 +212,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 @@ -244,6 +252,7 @@ CONFIG_BINFMT_AOUT=y # Power management options # # CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -282,6 +291,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -321,10 +331,6 @@ CONFIG_IPV6=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -353,6 +359,7 @@ CONFIG_IPV6=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -382,6 +389,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -417,6 +425,7 @@ CONFIG_MTD_PHYSMAP_START=0x0 CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # @@ -459,6 +468,11 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # CONFIG_IDE is not set # @@ -496,12 +510,9 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -512,6 +523,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -576,6 +588,7 @@ CONFIG_SATA_VITESSE=y # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set @@ -606,14 +619,8 @@ CONFIG_BLK_DEV_DM=y # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# +# CONFIG_DM_UEVENT is not set # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -628,6 +635,8 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -641,13 +650,16 @@ CONFIG_MII=y # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set @@ -667,6 +679,7 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -675,6 +688,7 @@ CONFIG_R8169=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -683,11 +697,14 @@ CONFIG_R8169=y CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set # CONFIG_TR is not set # @@ -703,7 +720,6 @@ CONFIG_NETDEV_10000=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -732,7 +748,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -781,12 +796,10 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y @@ -852,9 +865,9 @@ CONFIG_I2C_IOP3XX=y # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -862,12 +875,13 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -881,14 +895,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -900,29 +917,18 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set +# CONFIG_WATCHDOG is not set # -# LED drivers +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# LED Triggers +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices @@ -935,14 +941,16 @@ CONFIG_DAB=y # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Console display driver support @@ -957,6 +965,7 @@ CONFIG_DUMMY_CONSOLE=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # # USB Input Devices @@ -1013,6 +1022,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set @@ -1070,28 +1080,66 @@ CONFIG_USB_MON=y # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# Real Time Clock +# RTC interfaces # -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Engine support +# I2C RTC drivers # -CONFIG_DMA_ENGINE=y +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_RS5C372=y +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set # -# DMA Clients +# SPI RTC drivers # -CONFIG_NET_DMA=y + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_DMADEVICES=y # # DMA Devices # -# CONFIG_INTEL_IOATDMA is not set CONFIG_INTEL_IOP_ADMA=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +CONFIG_NET_DMA=y # # File systems @@ -1105,7 +1153,6 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -1145,7 +1192,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1162,10 +1208,12 @@ CONFIG_ECRYPT_FS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y @@ -1174,10 +1222,7 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1224,26 +1269,17 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set @@ -1270,10 +1306,13 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y # CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y @@ -1285,6 +1324,7 @@ CONFIG_DEBUG_LL=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y @@ -1309,6 +1349,7 @@ CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_LRW=y +# CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1323,11 +1364,13 @@ CONFIG_CRYPTO_TEA=y CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_KHAZAD=y CONFIG_CRYPTO_ANUBIS=y +# CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_MICHAEL_MIC=y CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set CONFIG_CRYPTO_HW=y # diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig index 721ee64a13f..917afb5ccfa 100644 --- a/arch/arm/configs/iop33x_defconfig +++ b/arch/arm/configs/iop33x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22 -# Thu Jul 19 16:05:59 2007 +# Linux kernel version: 2.6.24-rc5 +# Wed Dec 12 16:11:27 2007 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -26,15 +26,11 @@ CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y @@ -45,9 +41,14 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -69,7 +70,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -130,6 +130,7 @@ CONFIG_ARCH_IOP33X=y # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -150,6 +151,14 @@ CONFIG_IOP3XX_ATU=y # CONFIG_ARCH_IQ80331=y CONFIG_MACH_IQ80332=y + +# +# Boot options +# + +# +# Power management +# CONFIG_PLAT_IOP=y # @@ -179,11 +188,8 @@ CONFIG_XSCALE_PMU=y CONFIG_PCI=y CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -202,6 +208,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 @@ -241,6 +248,7 @@ CONFIG_BINFMT_AOUT=y # Power management options # # CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -279,6 +287,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -318,10 +327,6 @@ CONFIG_IPV6=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -350,6 +355,7 @@ CONFIG_IPV6=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -379,6 +385,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -419,6 +426,7 @@ CONFIG_MTD_PHYSMAP_START=0x0 CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # @@ -459,6 +467,11 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # CONFIG_IDE is not set # @@ -496,12 +509,9 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -512,6 +522,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -552,14 +563,8 @@ CONFIG_BLK_DEV_DM=y # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# +# CONFIG_DM_UEVENT is not set # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -574,6 +579,8 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_NET_ETHERNET is not set CONFIG_NETDEV_1000=y @@ -582,6 +589,7 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -589,6 +597,7 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -597,11 +606,14 @@ CONFIG_E1000_NAPI=y CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set # CONFIG_TR is not set # @@ -636,7 +648,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -685,12 +696,10 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y @@ -755,9 +764,9 @@ CONFIG_I2C_IOP3XX=y # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -765,12 +774,13 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -784,14 +794,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -803,29 +816,18 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set +# CONFIG_WATCHDOG is not set # -# LED drivers +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# LED Triggers +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices @@ -837,14 +839,16 @@ CONFIG_DAB=y # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Console display driver support @@ -859,6 +863,7 @@ CONFIG_DUMMY_CONSOLE=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -874,16 +879,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# Real Time Clock -# +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set +CONFIG_DMADEVICES=y # -# DMA Engine support +# DMA Devices # +CONFIG_INTEL_IOP_ADMA=y CONFIG_DMA_ENGINE=y # @@ -892,12 +896,6 @@ CONFIG_DMA_ENGINE=y CONFIG_NET_DMA=y # -# DMA Devices -# -# CONFIG_INTEL_IOATDMA is not set -CONFIG_INTEL_IOP_ADMA=y - -# # File systems # CONFIG_EXT2_FS=y @@ -909,7 +907,6 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -949,7 +946,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -969,10 +965,7 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1019,26 +1012,17 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set @@ -1065,10 +1049,13 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y # CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y @@ -1079,6 +1066,7 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig new file mode 100644 index 00000000000..ae4c5e62086 --- /dev/null +++ b/arch/arm/configs/msm_defconfig @@ -0,0 +1,895 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23 +# Wed Nov 7 01:36:45 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_GPIOS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_PANIC_TIMEOUT=0 +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_GOLDFISH is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +CONFIG_ARCH_MSM7X00A=y + +# +# Boot options +# + +# +# Power management +# + +# +# MSM7200 Board Type +# +CONFIG_MACH_HALIBUT=y +CONFIG_SERIAL_MSM=y +CONFIG_SERIAL_MSM_CONSOLE=y +# CONFIG_SERIAL_MSM_NOINIT is not set +CONFIG_MSM_SMD=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyMSM,115200n8" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set +CONFIG_MTD_MSM_NAND=y + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_GOLDFISH_NAND is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=y +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_BSDCOMP=y +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +CONFIG_MSM_RMNET=y +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_MEP is not set +CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI=y +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_UINPUT is not set +CONFIG_INPUT_GPIO=y + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DCC_TTY=y +# CONFIG_GOLDFISH_TTY is not set +CONFIG_BINDER=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_MSM=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +CONFIG_SENSORS_PCA9633=y +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +CONFIG_SENSORS_AKM8976=y +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_LOW_MEMORY_KILLER=y + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_MSM=y +# CONFIG_FB_GOLDFISH is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_LOGO is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# USB Function Support +# +CONFIG_USB_FUNCTION=y +CONFIG_USB_FUNCTION_MSM_HSUSB=y +# CONFIG_USB_FUNCTION_NULL is not set +# CONFIG_USB_FUNCTION_ZERO is not set +# CONFIG_USB_FUNCTION_LOOPBACK is not set +CONFIG_USB_FUNCTION_ADB=y +# CONFIG_MMC is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Android +# +# CONFIG_ANDROID_GADGET is not set +# CONFIG_ANDROID_RAM_CONSOLE is not set +CONFIG_ANDROID_LOGGER=y +CONFIG_ANDROID_VIBRATOR=y + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_YAFFS_FS=y +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +# CONFIG_FORCED_INLINING is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 593b56509f4..faa76192115 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o +obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c index 0a3e9ad297d..2f080a35a2d 100644 --- a/arch/arm/kernel/dma-isa.c +++ b/arch/arm/kernel/dma-isa.c @@ -216,7 +216,7 @@ void __init isa_init_dma(dma_t *dma) request_dma(DMA_ISA_CASCADE, "cascade"); - for (i = 0; i < sizeof(dma_resources) / sizeof(dma_resources[0]); i++) + for (i = 0; i < ARRAY_SIZE(dma_resources); i++) request_resource(&ioport_resource, dma_resources + i); } } diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 29dec080a60..a46d5b45676 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -11,8 +11,8 @@ * * Low-level vector interface routines * - * Note: there is a StrongARM bug in the STMIA rn, {regs}^ instruction that causes - * it to save wrong values... Be aware! + * Note: there is a StrongARM bug in the STMIA rn, {regs}^ instruction + * that causes it to save wrong values... Be aware! */ #include <asm/memory.h> @@ -58,6 +58,12 @@ .endm +#ifdef CONFIG_KPROBES + .section .kprobes.text,"ax",%progbits +#else + .text +#endif + /* * Invalid mode handlers */ @@ -112,8 +118,8 @@ common_invalid: #define SPFIX(code...) #endif - .macro svc_entry - sub sp, sp, #S_FRAME_SIZE + .macro svc_entry, stack_hole=0 + sub sp, sp, #(S_FRAME_SIZE + \stack_hole) SPFIX( tst sp, #4 ) SPFIX( bicne sp, sp, #4 ) stmib sp, {r1 - r12} @@ -121,7 +127,7 @@ common_invalid: ldmia r0, {r1 - r3} add r5, sp, #S_SP @ here for interlock avoidance mov r4, #-1 @ "" "" "" "" - add r0, sp, #S_FRAME_SIZE @ "" "" "" "" + add r0, sp, #(S_FRAME_SIZE + \stack_hole) SPFIX( addne r0, r0, #4 ) str r1, [sp] @ save the "real" r0 copied @ from the exception stack @@ -242,7 +248,14 @@ svc_preempt: .align 5 __und_svc: +#ifdef CONFIG_KPROBES + @ If a kprobe is about to simulate a "stmdb sp..." instruction, + @ it obviously needs free stack space which then will belong to + @ the saved context. + svc_entry 64 +#else svc_entry +#endif @ @ call emulation code, which returns using r9 if it has emulated @@ -480,6 +493,13 @@ __und_usr: * co-processor instructions. However, we have to watch out * for the ARM6/ARM7 SWI bug. * + * NEON is a special case that has to be handled here. Not all + * NEON instructions are co-processor instructions, so we have + * to make a special case of checking for them. Plus, there's + * five groups of them, so we have a table of mask/opcode pairs + * to check against, and if any match then we branch off into the + * NEON handler code. + * * Emulators may wish to make use of the following registers: * r0 = instruction opcode. * r2 = PC+4 @@ -488,6 +508,23 @@ __und_usr: * lr = unrecognised instruction return address */ call_fpe: +#ifdef CONFIG_NEON + adr r6, .LCneon_opcodes +2: + ldr r7, [r6], #4 @ mask value + cmp r7, #0 @ end mask? + beq 1f + and r8, r0, r7 + ldr r7, [r6], #4 @ opcode bits matching in mask + cmp r8, r7 @ NEON instruction? + bne 2b + get_thread_info r10 + mov r7, #1 + strb r7, [r10, #TI_USED_CP + 10] @ mark CP#10 as used + strb r7, [r10, #TI_USED_CP + 11] @ mark CP#11 as used + b do_vfp @ let VFP handler handle this +1: +#endif tst r0, #0x08000000 @ only CDP/CPRT/LDC/STC have bit 27 #if defined(CONFIG_CPU_ARM610) || defined(CONFIG_CPU_ARM710) and r8, r0, #0x0f000000 @ mask out op-code bits @@ -537,6 +574,20 @@ call_fpe: mov pc, lr @ CP#14 (Debug) mov pc, lr @ CP#15 (Control) +#ifdef CONFIG_NEON + .align 6 + +.LCneon_opcodes: + .word 0xfe000000 @ mask + .word 0xf2000000 @ opcode + + .word 0xff100000 @ mask + .word 0xf4000000 @ opcode + + .word 0x00000000 @ mask + .word 0x00000000 @ opcode +#endif + do_fpe: enable_irq ldr r4, .LCfp @@ -555,7 +606,7 @@ do_fpe: .data ENTRY(fp_enter) .word no_fp - .text + .previous no_fp: mov pc, lr diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 33e6cc2ffd3..6c90c50a9ee 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -72,7 +72,7 @@ no_work_pending: ldr r1, [sp, #S_PSR] @ get calling cpsr ldr lr, [sp, #S_PC]! @ get pc msr spsr_cxsf, r1 @ save in spsr_svc - ldmdb sp, {r0 - lr}^ @ get calling r1 - lr + ldmdb sp, {r0 - lr}^ @ get calling r0 - lr mov r0, r0 add sp, sp, #S_FRAME_SIZE - S_PC movs pc, lr @ return & move spsr_svc into cpsr diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c new file mode 100644 index 00000000000..d51bc8b6055 --- /dev/null +++ b/arch/arm/kernel/kprobes-decode.c @@ -0,0 +1,1529 @@ +/* + * arch/arm/kernel/kprobes-decode.c + * + * Copyright (C) 2006, 2007 Motorola Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +/* + * We do not have hardware single-stepping on ARM, This + * effort is further complicated by the ARM not having a + * "next PC" register. Instructions that change the PC + * can't be safely single-stepped in a MP environment, so + * we have a lot of work to do: + * + * In the prepare phase: + * *) If it is an instruction that does anything + * with the CPU mode, we reject it for a kprobe. + * (This is out of laziness rather than need. The + * instructions could be simulated.) + * + * *) Otherwise, decode the instruction rewriting its + * registers to take fixed, ordered registers and + * setting a handler for it to run the instruction. + * + * In the execution phase by an instruction's handler: + * + * *) If the PC is written to by the instruction, the + * instruction must be fully simulated in software. + * If it is a conditional instruction, the handler + * will use insn[0] to copy its condition code to + * set r0 to 1 and insn[1] to "mov pc, lr" to return. + * + * *) Otherwise, a modified form of the instruction is + * directly executed. Its handler calls the + * instruction in insn[0]. In insn[1] is a + * "mov pc, lr" to return. + * + * Before calling, load up the reordered registers + * from the original instruction's registers. If one + * of the original input registers is the PC, compute + * and adjust the appropriate input register. + * + * After call completes, copy the output registers to + * the original instruction's original registers. + * + * We don't use a real breakpoint instruction since that + * would have us in the kernel go from SVC mode to SVC + * mode losing the link register. Instead we use an + * undefined instruction. To simplify processing, the + * undefined instruction used for kprobes must be reserved + * exclusively for kprobes use. + * + * TODO: ifdef out some instruction decoding based on architecture. + */ + +#include <linux/kernel.h> +#include <linux/kprobes.h> + +#define sign_extend(x, signbit) ((x) | (0 - ((x) & (1 << (signbit))))) + +#define branch_displacement(insn) sign_extend(((insn) & 0xffffff) << 2, 25) + +#define PSR_fs (PSR_f|PSR_s) + +#define KPROBE_RETURN_INSTRUCTION 0xe1a0f00e /* mov pc, lr */ +#define SET_R0_TRUE_INSTRUCTION 0xe3a00001 /* mov r0, #1 */ + +#define truecc_insn(insn) (((insn) & 0xf0000000) | \ + (SET_R0_TRUE_INSTRUCTION & 0x0fffffff)) + +typedef long (insn_0arg_fn_t)(void); +typedef long (insn_1arg_fn_t)(long); +typedef long (insn_2arg_fn_t)(long, long); +typedef long (insn_3arg_fn_t)(long, long, long); +typedef long (insn_4arg_fn_t)(long, long, long, long); +typedef long long (insn_llret_0arg_fn_t)(void); +typedef long long (insn_llret_3arg_fn_t)(long, long, long); +typedef long long (insn_llret_4arg_fn_t)(long, long, long, long); + +union reg_pair { + long long dr; +#ifdef __LITTLE_ENDIAN + struct { long r0, r1; }; +#else + struct { long r1, r0; }; +#endif +}; + +/* + * For STR and STM instructions, an ARM core may choose to use either + * a +8 or a +12 displacement from the current instruction's address. + * Whichever value is chosen for a given core, it must be the same for + * both instructions and may not change. This function measures it. + */ + +static int str_pc_offset; + +static void __init find_str_pc_offset(void) +{ + int addr, scratch, ret; + + __asm__ ( + "sub %[ret], pc, #4 \n\t" + "str pc, %[addr] \n\t" + "ldr %[scr], %[addr] \n\t" + "sub %[ret], %[scr], %[ret] \n\t" + : [ret] "=r" (ret), [scr] "=r" (scratch), [addr] "+m" (addr)); + + str_pc_offset = ret; +} + +/* + * The insnslot_?arg_r[w]flags() functions below are to keep the + * msr -> *fn -> mrs instruction sequences indivisible so that + * the state of the CPSR flags aren't inadvertently modified + * just before or just after the call. + */ + +static inline long __kprobes +insnslot_0arg_rflags(long cpsr, insn_0arg_fn_t *fn) +{ + register long ret asm("r0"); + + __asm__ __volatile__ ( + "msr cpsr_fs, %[cpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + : "=r" (ret) + : [cpsr] "r" (cpsr), [fn] "r" (fn) + : "lr", "cc" + ); + return ret; +} + +static inline long long __kprobes +insnslot_llret_0arg_rflags(long cpsr, insn_llret_0arg_fn_t *fn) +{ + register long ret0 asm("r0"); + register long ret1 asm("r1"); + union reg_pair fnr; + + __asm__ __volatile__ ( + "msr cpsr_fs, %[cpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + : "=r" (ret0), "=r" (ret1) + : [cpsr] "r" (cpsr), [fn] "r" (fn) + : "lr", "cc" + ); + fnr.r0 = ret0; + fnr.r1 = ret1; + return fnr.dr; +} + +static inline long __kprobes +insnslot_1arg_rflags(long r0, long cpsr, insn_1arg_fn_t *fn) +{ + register long rr0 asm("r0") = r0; + register long ret asm("r0"); + + __asm__ __volatile__ ( + "msr cpsr_fs, %[cpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + : "=r" (ret) + : "0" (rr0), [cpsr] "r" (cpsr), [fn] "r" (fn) + : "lr", "cc" + ); + return ret; +} + +static inline long __kprobes +insnslot_2arg_rflags(long r0, long r1, long cpsr, insn_2arg_fn_t *fn) +{ + register long rr0 asm("r0") = r0; + register long rr1 asm("r1") = r1; + register long ret asm("r0"); + + __asm__ __volatile__ ( + "msr cpsr_fs, %[cpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + : "=r" (ret) + : "0" (rr0), "r" (rr1), + [cpsr] "r" (cpsr), [fn] "r" (fn) + : "lr", "cc" + ); + return ret; +} + +static inline long __kprobes +insnslot_3arg_rflags(long r0, long r1, long r2, long cpsr, insn_3arg_fn_t *fn) +{ + register long rr0 asm("r0") = r0; + register long rr1 asm("r1") = r1; + register long rr2 asm("r2") = r2; + register long ret asm("r0"); + + __asm__ __volatile__ ( + "msr cpsr_fs, %[cpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + : "=r" (ret) + : "0" (rr0), "r" (rr1), "r" (rr2), + [cpsr] "r" (cpsr), [fn] "r" (fn) + : "lr", "cc" + ); + return ret; +} + +static inline long long __kprobes +insnslot_llret_3arg_rflags(long r0, long r1, long r2, long cpsr, + insn_llret_3arg_fn_t *fn) +{ + register long rr0 asm("r0") = r0; + register long rr1 asm("r1") = r1; + register long rr2 asm("r2") = r2; + register long ret0 asm("r0"); + register long ret1 asm("r1"); + union reg_pair fnr; + + __asm__ __volatile__ ( + "msr cpsr_fs, %[cpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + : "=r" (ret0), "=r" (ret1) + : "0" (rr0), "r" (rr1), "r" (rr2), + [cpsr] "r" (cpsr), [fn] "r" (fn) + : "lr", "cc" + ); + fnr.r0 = ret0; + fnr.r1 = ret1; + return fnr.dr; +} + +static inline long __kprobes +insnslot_4arg_rflags(long r0, long r1, long r2, long r3, long cpsr, + insn_4arg_fn_t *fn) +{ + register long rr0 asm("r0") = r0; + register long rr1 asm("r1") = r1; + register long rr2 asm("r2") = r2; + register long rr3 asm("r3") = r3; + register long ret asm("r0"); + + __asm__ __volatile__ ( + "msr cpsr_fs, %[cpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + : "=r" (ret) + : "0" (rr0), "r" (rr1), "r" (rr2), "r" (rr3), + [cpsr] "r" (cpsr), [fn] "r" (fn) + : "lr", "cc" + ); + return ret; +} + +static inline long __kprobes +insnslot_1arg_rwflags(long r0, long *cpsr, insn_1arg_fn_t *fn) +{ + register long rr0 asm("r0") = r0; + register long ret asm("r0"); + long oldcpsr = *cpsr; + long newcpsr; + + __asm__ __volatile__ ( + "msr cpsr_fs, %[oldcpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + "mrs %[newcpsr], cpsr \n\t" + : "=r" (ret), [newcpsr] "=r" (newcpsr) + : "0" (rr0), [oldcpsr] "r" (oldcpsr), [fn] "r" (fn) + : "lr", "cc" + ); + *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs); + return ret; +} + +static inline long __kprobes +insnslot_2arg_rwflags(long r0, long r1, long *cpsr, insn_2arg_fn_t *fn) +{ + register long rr0 asm("r0") = r0; + register long rr1 asm("r1") = r1; + register long ret asm("r0"); + long oldcpsr = *cpsr; + long newcpsr; + + __asm__ __volatile__ ( + "msr cpsr_fs, %[oldcpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + "mrs %[newcpsr], cpsr \n\t" + : "=r" (ret), [newcpsr] "=r" (newcpsr) + : "0" (rr0), "r" (rr1), [oldcpsr] "r" (oldcpsr), [fn] "r" (fn) + : "lr", "cc" + ); + *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs); + return ret; +} + +static inline long __kprobes +insnslot_3arg_rwflags(long r0, long r1, long r2, long *cpsr, + insn_3arg_fn_t *fn) +{ + register long rr0 asm("r0") = r0; + register long rr1 asm("r1") = r1; + register long rr2 asm("r2") = r2; + register long ret asm("r0"); + long oldcpsr = *cpsr; + long newcpsr; + + __asm__ __volatile__ ( + "msr cpsr_fs, %[oldcpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + "mrs %[newcpsr], cpsr \n\t" + : "=r" (ret), [newcpsr] "=r" (newcpsr) + : "0" (rr0), "r" (rr1), "r" (rr2), + [oldcpsr] "r" (oldcpsr), [fn] "r" (fn) + : "lr", "cc" + ); + *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs); + return ret; +} + +static inline long __kprobes +insnslot_4arg_rwflags(long r0, long r1, long r2, long r3, long *cpsr, + insn_4arg_fn_t *fn) +{ + register long rr0 asm("r0") = r0; + register long rr1 asm("r1") = r1; + register long rr2 asm("r2") = r2; + register long rr3 asm("r3") = r3; + register long ret asm("r0"); + long oldcpsr = *cpsr; + long newcpsr; + + __asm__ __volatile__ ( + "msr cpsr_fs, %[oldcpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + "mrs %[newcpsr], cpsr \n\t" + : "=r" (ret), [newcpsr] "=r" (newcpsr) + : "0" (rr0), "r" (rr1), "r" (rr2), "r" (rr3), + [oldcpsr] "r" (oldcpsr), [fn] "r" (fn) + : "lr", "cc" + ); + *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs); + return ret; +} + +static inline long long __kprobes +insnslot_llret_4arg_rwflags(long r0, long r1, long r2, long r3, long *cpsr, + insn_llret_4arg_fn_t *fn) +{ + register long rr0 asm("r0") = r0; + register long rr1 asm("r1") = r1; + register long rr2 asm("r2") = r2; + register long rr3 asm("r3") = r3; + register long ret0 asm("r0"); + register long ret1 asm("r1"); + long oldcpsr = *cpsr; + long newcpsr; + union reg_pair fnr; + + __asm__ __volatile__ ( + "msr cpsr_fs, %[oldcpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + "mrs %[newcpsr], cpsr \n\t" + : "=r" (ret0), "=r" (ret1), [newcpsr] "=r" (newcpsr) + : "0" (rr0), "r" (rr1), "r" (rr2), "r" (rr3), + [oldcpsr] "r" (oldcpsr), [fn] "r" (fn) + : "lr", "cc" + ); + *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs); + fnr.r0 = ret0; + fnr.r1 = ret1; + return fnr.dr; +} + +/* + * To avoid the complications of mimicing single-stepping on a + * processor without a Next-PC or a single-step mode, and to + * avoid having to deal with the side-effects of boosting, we + * simulate or emulate (almost) all ARM instructions. + * + * "Simulation" is where the instruction's behavior is duplicated in + * C code. "Emulation" is where the original instruction is rewritten + * and executed, often by altering its registers. + * + * By having all behavior of the kprobe'd instruction completed before + * returning from the kprobe_handler(), all locks (scheduler and + * interrupt) can safely be released. There is no need for secondary + * breakpoints, no race with MP or preemptable kernels, nor having to + * clean up resources counts at a later time impacting overall system + * performance. By rewriting the instruction, only the minimum registers + * need to be loaded and saved back optimizing performance. + * + * Calling the insnslot_*_rwflags version of a function doesn't hurt + * anything even when the CPSR flags aren't updated by the + * instruction. It's just a little slower in return for saving + * a little space by not having a duplicate function that doesn't + * update the flags. (The same optimization can be said for + * instructions that do or don't perform register writeback) + * Also, instructions can either read the flags, only write the + * flags, or read and write the flags. To save combinations + * rather than for sheer performance, flag functions just assume + * read and write of flags. + */ + +static void __kprobes simulate_bbl(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + long iaddr = (long)p->addr; + int disp = branch_displacement(insn); + + if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn)) + return; + + if (insn & (1 << 24)) + regs->ARM_lr = iaddr + 4; + + regs->ARM_pc = iaddr + 8 + disp; +} + +static void __kprobes simulate_blx1(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + long iaddr = (long)p->addr; + int disp = branch_displacement(insn); + + regs->ARM_lr = iaddr + 4; + regs->ARM_pc = iaddr + 8 + disp + ((insn >> 23) & 0x2); + regs->ARM_cpsr |= PSR_T_BIT; +} + +static void __kprobes simulate_blx2bx(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rm = insn & 0xf; + long rmv = regs->uregs[rm]; + + if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn)) + return; + + if (insn & (1 << 5)) + regs->ARM_lr = (long)p->addr + 4; + + regs->ARM_pc = rmv & ~0x1; + regs->ARM_cpsr &= ~PSR_T_BIT; + if (rmv & 0x1) + regs->ARM_cpsr |= PSR_T_BIT; +} + +static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rn = (insn >> 16) & 0xf; + int lbit = insn & (1 << 20); + int wbit = insn & (1 << 21); + int ubit = insn & (1 << 23); + int pbit = insn & (1 << 24); + long *addr = (long *)regs->uregs[rn]; + int reg_bit_vector; + int reg_count; + + if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn)) + return; + + reg_count = 0; + reg_bit_vector = insn & 0xffff; + while (reg_bit_vector) { + reg_bit_vector &= (reg_bit_vector - 1); + ++reg_count; + } + + if (!ubit) + addr -= reg_count; + addr += (!pbit ^ !ubit); + + reg_bit_vector = insn & 0xffff; + while (reg_bit_vector) { + int reg = __ffs(reg_bit_vector); + reg_bit_vector &= (reg_bit_vector - 1); + if (lbit) + regs->uregs[reg] = *addr++; + else + *addr++ = regs->uregs[reg]; + } + + if (wbit) { + if (!ubit) + addr -= reg_count; + addr -= (!pbit ^ !ubit); + regs->uregs[rn] = (long)addr; + } +} + +static void __kprobes simulate_stm1_pc(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + + if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn)) + return; + + regs->ARM_pc = (long)p->addr + str_pc_offset; + simulate_ldm1stm1(p, regs); + regs->ARM_pc = (long)p->addr + 4; +} + +static void __kprobes simulate_mov_ipsp(struct kprobe *p, struct pt_regs *regs) +{ + regs->uregs[12] = regs->uregs[13]; +} + +static void __kprobes emulate_ldcstc(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rn = (insn >> 16) & 0xf; + long rnv = regs->uregs[rn]; + + /* Save Rn in case of writeback. */ + regs->uregs[rn] = insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_ldrd(struct kprobe *p, struct pt_regs *regs) +{ + insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + int rm = insn & 0xf; /* rm may be invalid, don't care. */ + + /* Not following the C calling convention here, so need asm(). */ + __asm__ __volatile__ ( + "ldr r0, %[rn] \n\t" + "ldr r1, %[rm] \n\t" + "msr cpsr_fs, %[cpsr]\n\t" + "mov lr, pc \n\t" + "mov pc, %[i_fn] \n\t" + "str r0, %[rn] \n\t" /* in case of writeback */ + "str r2, %[rd0] \n\t" + "str r3, %[rd1] \n\t" + : [rn] "+m" (regs->uregs[rn]), + [rd0] "=m" (regs->uregs[rd]), + [rd1] "=m" (regs->uregs[rd+1]) + : [rm] "m" (regs->uregs[rm]), + [cpsr] "r" (regs->ARM_cpsr), + [i_fn] "r" (i_fn) + : "r0", "r1", "r2", "r3", "lr", "cc" + ); +} + +static void __kprobes emulate_strd(struct kprobe *p, struct pt_regs *regs) +{ + insn_4arg_fn_t *i_fn = (insn_4arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + int rm = insn & 0xf; + long rnv = regs->uregs[rn]; + long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */ + + regs->uregs[rn] = insnslot_4arg_rflags(rnv, rmv, regs->uregs[rd], + regs->uregs[rd+1], + regs->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_ldr(struct kprobe *p, struct pt_regs *regs) +{ + insn_llret_3arg_fn_t *i_fn = (insn_llret_3arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + union reg_pair fnr; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + int rm = insn & 0xf; + long rdv; + long rnv = regs->uregs[rn]; + long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */ + long cpsr = regs->ARM_cpsr; + + fnr.dr = insnslot_llret_3arg_rflags(rnv, 0, rmv, cpsr, i_fn); + regs->uregs[rn] = fnr.r0; /* Save Rn in case of writeback. */ + rdv = fnr.r1; + + if (rd == 15) { +#if __LINUX_ARM_ARCH__ >= 5 + cpsr &= ~PSR_T_BIT; + if (rdv & 0x1) + cpsr |= PSR_T_BIT; + regs->ARM_cpsr = cpsr; + rdv &= ~0x1; +#else + rdv &= ~0x2; +#endif + } + regs->uregs[rd] = rdv; +} + +static void __kprobes emulate_str(struct kprobe *p, struct pt_regs *regs) +{ + insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + long iaddr = (long)p->addr; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + int rm = insn & 0xf; + long rdv = (rd == 15) ? iaddr + str_pc_offset : regs->uregs[rd]; + long rnv = (rn == 15) ? iaddr + 8 : regs->uregs[rn]; + long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */ + + /* Save Rn in case of writeback. */ + regs->uregs[rn] = + insnslot_3arg_rflags(rnv, rdv, rmv, regs->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_mrrc(struct kprobe *p, struct pt_regs *regs) +{ + insn_llret_0arg_fn_t *i_fn = (insn_llret_0arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + union reg_pair fnr; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + + fnr.dr = insnslot_llret_0arg_rflags(regs->ARM_cpsr, i_fn); + regs->uregs[rn] = fnr.r0; + regs->uregs[rd] = fnr.r1; +} + +static void __kprobes emulate_mcrr(struct kprobe *p, struct pt_regs *regs) +{ + insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + long rnv = regs->uregs[rn]; + long rdv = regs->uregs[rd]; + + insnslot_2arg_rflags(rnv, rdv, regs->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_sat(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + int rm = insn & 0xf; + long rmv = regs->uregs[rm]; + + /* Writes Q flag */ + regs->uregs[rd] = insnslot_1arg_rwflags(rmv, ®s->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_sel(struct kprobe *p, struct pt_regs *regs) +{ + insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + int rm = insn & 0xf; + long rnv = regs->uregs[rn]; + long rmv = regs->uregs[rm]; + + /* Reads GE bits */ + regs->uregs[rd] = insnslot_2arg_rflags(rnv, rmv, regs->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_none(struct kprobe *p, struct pt_regs *regs) +{ + insn_0arg_fn_t *i_fn = (insn_0arg_fn_t *)&p->ainsn.insn[0]; + + insnslot_0arg_rflags(regs->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_rd12(struct kprobe *p, struct pt_regs *regs) +{ + insn_0arg_fn_t *i_fn = (insn_0arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + + regs->uregs[rd] = insnslot_0arg_rflags(regs->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_ird12(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int ird = (insn >> 12) & 0xf; + + insnslot_1arg_rflags(regs->uregs[ird], regs->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_rn16(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rn = (insn >> 16) & 0xf; + long rnv = regs->uregs[rn]; + + insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_rd12rm0(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + int rm = insn & 0xf; + long rmv = regs->uregs[rm]; + + regs->uregs[rd] = insnslot_1arg_rflags(rmv, regs->ARM_cpsr, i_fn); +} + +static void __kprobes +emulate_rd12rn16rm0_rwflags(struct kprobe *p, struct pt_regs *regs) +{ + insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + int rm = insn & 0xf; + long rnv = regs->uregs[rn]; + long rmv = regs->uregs[rm]; + + regs->uregs[rd] = + insnslot_2arg_rwflags(rnv, rmv, ®s->ARM_cpsr, i_fn); +} + +static void __kprobes +emulate_rd16rn12rs8rm0_rwflags(struct kprobe *p, struct pt_regs *regs) +{ + insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 16) & 0xf; + int rn = (insn >> 12) & 0xf; + int rs = (insn >> 8) & 0xf; + int rm = insn & 0xf; + long rnv = regs->uregs[rn]; + long rsv = regs->uregs[rs]; + long rmv = regs->uregs[rm]; + + regs->uregs[rd] = + insnslot_3arg_rwflags(rnv, rsv, rmv, ®s->ARM_cpsr, i_fn); +} + +static void __kprobes +emulate_rd16rs8rm0_rwflags(struct kprobe *p, struct pt_regs *regs) +{ + insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 16) & 0xf; + int rs = (insn >> 8) & 0xf; + int rm = insn & 0xf; + long rsv = regs->uregs[rs]; + long rmv = regs->uregs[rm]; + + regs->uregs[rd] = + insnslot_2arg_rwflags(rsv, rmv, ®s->ARM_cpsr, i_fn); +} + +static void __kprobes +emulate_rdhi16rdlo12rs8rm0_rwflags(struct kprobe *p, struct pt_regs *regs) +{ + insn_llret_4arg_fn_t *i_fn = (insn_llret_4arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + union reg_pair fnr; + int rdhi = (insn >> 16) & 0xf; + int rdlo = (insn >> 12) & 0xf; + int rs = (insn >> 8) & 0xf; + int rm = insn & 0xf; + long rsv = regs->uregs[rs]; + long rmv = regs->uregs[rm]; + + fnr.dr = insnslot_llret_4arg_rwflags(regs->uregs[rdhi], + regs->uregs[rdlo], rsv, rmv, + ®s->ARM_cpsr, i_fn); + regs->uregs[rdhi] = fnr.r0; + regs->uregs[rdlo] = fnr.r1; +} + +static void __kprobes +emulate_alu_imm_rflags(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + long rnv = (rn == 15) ? (long)p->addr + 8 : regs->uregs[rn]; + + regs->uregs[rd] = insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn); +} + +static void __kprobes +emulate_alu_imm_rwflags(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + long rnv = (rn == 15) ? (long)p->addr + 8 : regs->uregs[rn]; + + regs->uregs[rd] = insnslot_1arg_rwflags(rnv, ®s->ARM_cpsr, i_fn); +} + +static void __kprobes +emulate_alu_rflags(struct kprobe *p, struct pt_regs *regs) +{ + insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + long ppc = (long)p->addr + 8; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; /* rn/rnv/rs/rsv may be */ + int rs = (insn >> 8) & 0xf; /* invalid, don't care. */ + int rm = insn & 0xf; + long rnv = (rn == 15) ? ppc : regs->uregs[rn]; + long rmv = (rm == 15) ? ppc : regs->uregs[rm]; + long rsv = regs->uregs[rs]; + + regs->uregs[rd] = + insnslot_3arg_rflags(rnv, rmv, rsv, regs->ARM_cpsr, i_fn); +} + +static void __kprobes +emulate_alu_rwflags(struct kprobe *p, struct pt_regs *regs) +{ + insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + long ppc = (long)p->addr + 8; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; /* rn/rnv/rs/rsv may be */ + int rs = (insn >> 8) & 0xf; /* invalid, don't care. */ + int rm = insn & 0xf; + long rnv = (rn == 15) ? ppc : regs->uregs[rn]; + long rmv = (rm == 15) ? ppc : regs->uregs[rm]; + long rsv = regs->uregs[rs]; + + regs->uregs[rd] = + insnslot_3arg_rwflags(rnv, rmv, rsv, ®s->ARM_cpsr, i_fn); +} + +static enum kprobe_insn __kprobes +prep_emulate_ldr_str(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + int ibit = (insn & (1 << 26)) ? 25 : 22; + + insn &= 0xfff00fff; + insn |= 0x00001000; /* Rn = r0, Rd = r1 */ + if (insn & (1 << ibit)) { + insn &= ~0xf; + insn |= 2; /* Rm = r2 */ + } + asi->insn[0] = insn; + asi->insn_handler = (insn & (1 << 20)) ? emulate_ldr : emulate_str; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +prep_emulate_rd12rm0(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_rd12rm0; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +prep_emulate_rd12(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + insn &= 0xffff0fff; /* Rd = r0 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_rd12; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +prep_emulate_rd12rn16rm0_wflags(kprobe_opcode_t insn, + struct arch_specific_insn *asi) +{ + insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */ + insn |= 0x00000001; /* Rm = r1 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_rd12rn16rm0_rwflags; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +prep_emulate_rd16rs8rm0_wflags(kprobe_opcode_t insn, + struct arch_specific_insn *asi) +{ + insn &= 0xfff0f0f0; /* Rd = r0, Rs = r0 */ + insn |= 0x00000001; /* Rm = r1 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_rd16rs8rm0_rwflags; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +prep_emulate_rd16rn12rs8rm0_wflags(kprobe_opcode_t insn, + struct arch_specific_insn *asi) +{ + insn &= 0xfff000f0; /* Rd = r0, Rn = r0 */ + insn |= 0x00000102; /* Rs = r1, Rm = r2 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_rd16rn12rs8rm0_rwflags; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +prep_emulate_rdhi16rdlo12rs8rm0_wflags(kprobe_opcode_t insn, + struct arch_specific_insn *asi) +{ + insn &= 0xfff000f0; /* RdHi = r0, RdLo = r1 */ + insn |= 0x00001203; /* Rs = r2, Rm = r3 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_rdhi16rdlo12rs8rm0_rwflags; + return INSN_GOOD; +} + +/* + * For the instruction masking and comparisons in all the "space_*" + * functions below, Do _not_ rearrange the order of tests unless + * you're very, very sure of what you are doing. For the sake of + * efficiency, the masks for some tests sometimes assume other test + * have been done prior to them so the number of patterns to test + * for an instruction set can be as broad as possible to reduce the + * number of tests needed. + */ + +static enum kprobe_insn __kprobes +space_1111(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* CPS mmod == 1 : 1111 0001 0000 xx10 xxxx xxxx xx0x xxxx */ + /* RFE : 1111 100x x0x1 xxxx xxxx 1010 xxxx xxxx */ + /* SRS : 1111 100x x1x0 1101 xxxx 0101 xxxx xxxx */ + if ((insn & 0xfff30020) == 0xf1020000 || + (insn & 0xfe500f00) == 0xf8100a00 || + (insn & 0xfe5f0f00) == 0xf84d0500) + return INSN_REJECTED; + + /* PLD : 1111 01x1 x101 xxxx xxxx xxxx xxxx xxxx : */ + if ((insn & 0xfd700000) == 0xf4500000) { + insn &= 0xfff0ffff; /* Rn = r0 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_rn16; + return INSN_GOOD; + } + + /* BLX(1) : 1111 101x xxxx xxxx xxxx xxxx xxxx xxxx : */ + if ((insn & 0xfe000000) == 0xfa000000) { + asi->insn_handler = simulate_blx1; + return INSN_GOOD_NO_SLOT; + } + + /* SETEND : 1111 0001 0000 0001 xxxx xxxx 0000 xxxx */ + /* CDP2 : 1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */ + if ((insn & 0xffff00f0) == 0xf1010000 || + (insn & 0xff000010) == 0xfe000000) { + asi->insn[0] = insn; + asi->insn_handler = emulate_none; + return INSN_GOOD; + } + + /* MCRR2 : 1111 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */ + /* MRRC2 : 1111 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */ + if ((insn & 0xffe00000) == 0xfc400000) { + insn &= 0xfff00fff; /* Rn = r0 */ + insn |= 0x00001000; /* Rd = r1 */ + asi->insn[0] = insn; + asi->insn_handler = + (insn & (1 << 20)) ? emulate_mrrc : emulate_mcrr; + return INSN_GOOD; + } + + /* LDC2 : 1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */ + /* STC2 : 1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */ + if ((insn & 0xfe000000) == 0xfc000000) { + insn &= 0xfff0ffff; /* Rn = r0 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_ldcstc; + return INSN_GOOD; + } + + /* MCR2 : 1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */ + /* MRC2 : 1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */ + insn &= 0xffff0fff; /* Rd = r0 */ + asi->insn[0] = insn; + asi->insn_handler = (insn & (1 << 20)) ? emulate_rd12 : emulate_ird12; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* cccc 0001 0xx0 xxxx xxxx xxxx xxxx xxx0 xxxx */ + if ((insn & 0x0f900010) == 0x01000000) { + + /* BXJ : cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */ + /* MSR : cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */ + if ((insn & 0x0ff000f0) == 0x01200020 || + (insn & 0x0fb000f0) == 0x01200000) + return INSN_REJECTED; + + /* MRS : cccc 0001 0x00 xxxx xxxx xxxx 0000 xxxx */ + if ((insn & 0x0fb00010) == 0x01000000) + return prep_emulate_rd12(insn, asi); + + /* SMLALxy : cccc 0001 0100 xxxx xxxx xxxx 1xx0 xxxx */ + if ((insn & 0x0ff00090) == 0x01400080) + return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi); + + /* SMULWy : cccc 0001 0010 xxxx xxxx xxxx 1x10 xxxx */ + /* SMULxy : cccc 0001 0110 xxxx xxxx xxxx 1xx0 xxxx */ + if ((insn & 0x0ff000b0) == 0x012000a0 || + (insn & 0x0ff00090) == 0x01600080) + return prep_emulate_rd16rs8rm0_wflags(insn, asi); + + /* SMLAxy : cccc 0001 0000 xxxx xxxx xxxx 1xx0 xxxx : Q */ + /* SMLAWy : cccc 0001 0010 xxxx xxxx xxxx 0x00 xxxx : Q */ + return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); + + } + + /* cccc 0001 0xx0 xxxx xxxx xxxx xxxx 0xx1 xxxx */ + else if ((insn & 0x0f900090) == 0x01000010) { + + /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */ + if ((insn & 0xfff000f0) == 0xe1200070) + return INSN_REJECTED; + + /* BLX(2) : cccc 0001 0010 xxxx xxxx xxxx 0011 xxxx */ + /* BX : cccc 0001 0010 xxxx xxxx xxxx 0001 xxxx */ + if ((insn & 0x0ff000d0) == 0x01200010) { + asi->insn[0] = truecc_insn(insn); + asi->insn_handler = simulate_blx2bx; + return INSN_GOOD; + } + + /* CLZ : cccc 0001 0110 xxxx xxxx xxxx 0001 xxxx */ + if ((insn & 0x0ff000f0) == 0x01600010) + return prep_emulate_rd12rm0(insn, asi); + + /* QADD : cccc 0001 0000 xxxx xxxx xxxx 0101 xxxx :Q */ + /* QSUB : cccc 0001 0010 xxxx xxxx xxxx 0101 xxxx :Q */ + /* QDADD : cccc 0001 0100 xxxx xxxx xxxx 0101 xxxx :Q */ + /* QDSUB : cccc 0001 0110 xxxx xxxx xxxx 0101 xxxx :Q */ + return prep_emulate_rd12rn16rm0_wflags(insn, asi); + } + + /* cccc 0000 xxxx xxxx xxxx xxxx xxxx 1001 xxxx */ + else if ((insn & 0x0f000090) == 0x00000090) { + + /* MUL : cccc 0000 0000 xxxx xxxx xxxx 1001 xxxx : */ + /* MULS : cccc 0000 0001 xxxx xxxx xxxx 1001 xxxx :cc */ + /* MLA : cccc 0000 0010 xxxx xxxx xxxx 1001 xxxx : */ + /* MLAS : cccc 0000 0011 xxxx xxxx xxxx 1001 xxxx :cc */ + /* UMAAL : cccc 0000 0100 xxxx xxxx xxxx 1001 xxxx : */ + /* UMULL : cccc 0000 1000 xxxx xxxx xxxx 1001 xxxx : */ + /* UMULLS : cccc 0000 1001 xxxx xxxx xxxx 1001 xxxx :cc */ + /* UMLAL : cccc 0000 1010 xxxx xxxx xxxx 1001 xxxx : */ + /* UMLALS : cccc 0000 1011 xxxx xxxx xxxx 1001 xxxx :cc */ + /* SMULL : cccc 0000 1100 xxxx xxxx xxxx 1001 xxxx : */ + /* SMULLS : cccc 0000 1101 xxxx xxxx xxxx 1001 xxxx :cc */ + /* SMLAL : cccc 0000 1110 xxxx xxxx xxxx 1001 xxxx : */ + /* SMLALS : cccc 0000 1111 xxxx xxxx xxxx 1001 xxxx :cc */ + if ((insn & 0x0fe000f0) == 0x00000090) { + return prep_emulate_rd16rs8rm0_wflags(insn, asi); + } else if ((insn & 0x0fe000f0) == 0x00200090) { + return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); + } else { + return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi); + } + } + + /* cccc 000x xxxx xxxx xxxx xxxx xxxx 1xx1 xxxx */ + else if ((insn & 0x0e000090) == 0x00000090) { + + /* SWP : cccc 0001 0000 xxxx xxxx xxxx 1001 xxxx */ + /* SWPB : cccc 0001 0100 xxxx xxxx xxxx 1001 xxxx */ + /* LDRD : cccc 000x xxx0 xxxx xxxx xxxx 1101 xxxx */ + /* STRD : cccc 000x xxx0 xxxx xxxx xxxx 1111 xxxx */ + /* STREX : cccc 0001 1000 xxxx xxxx xxxx 1001 xxxx */ + /* LDREX : cccc 0001 1001 xxxx xxxx xxxx 1001 xxxx */ + /* LDRH : cccc 000x xxx1 xxxx xxxx xxxx 1011 xxxx */ + /* STRH : cccc 000x xxx0 xxxx xxxx xxxx 1011 xxxx */ + /* LDRSB : cccc 000x xxx1 xxxx xxxx xxxx 1101 xxxx */ + /* LDRSH : cccc 000x xxx1 xxxx xxxx xxxx 1111 xxxx */ + if ((insn & 0x0fb000f0) == 0x01000090) { + /* SWP/SWPB */ + return prep_emulate_rd12rn16rm0_wflags(insn, asi); + } else if ((insn & 0x0e1000d0) == 0x00000d0) { + /* STRD/LDRD */ + insn &= 0xfff00fff; + insn |= 0x00002000; /* Rn = r0, Rd = r2 */ + if (insn & (1 << 22)) { + /* I bit */ + insn &= ~0xf; + insn |= 1; /* Rm = r1 */ + } + asi->insn[0] = insn; + asi->insn_handler = + (insn & (1 << 5)) ? emulate_strd : emulate_ldrd; + return INSN_GOOD; + } + + return prep_emulate_ldr_str(insn, asi); + } + + /* cccc 000x xxxx xxxx xxxx xxxx xxxx xxxx xxxx */ + + /* + * ALU op with S bit and Rd == 15 : + * cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx + */ + if ((insn & 0x0e10f000) == 0x0010f000) + return INSN_REJECTED; + + /* + * "mov ip, sp" is the most common kprobe'd instruction by far. + * Check and optimize for it explicitly. + */ + if (insn == 0xe1a0c00d) { + asi->insn_handler = simulate_mov_ipsp; + return INSN_GOOD_NO_SLOT; + } + + /* + * Data processing: Immediate-shift / Register-shift + * ALU op : cccc 000x xxxx xxxx xxxx xxxx xxxx xxxx + * CPY : cccc 0001 1010 xxxx xxxx 0000 0000 xxxx + * MOV : cccc 0001 101x xxxx xxxx xxxx xxxx xxxx + * *S (bit 20) updates condition codes + * ADC/SBC/RSC reads the C flag + */ + insn &= 0xfff00ff0; /* Rn = r0, Rd = r0 */ + insn |= 0x00000001; /* Rm = r1 */ + if (insn & 0x010) { + insn &= 0xfffff0ff; /* register shift */ + insn |= 0x00000200; /* Rs = r2 */ + } + asi->insn[0] = insn; + asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ + emulate_alu_rwflags : emulate_alu_rflags; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* + * MSR : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx + * Undef : cccc 0011 0x00 xxxx xxxx xxxx xxxx xxxx + * ALU op with S bit and Rd == 15 : + * cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx + */ + if ((insn & 0x0f900000) == 0x03200000 || /* MSR & Undef */ + (insn & 0x0e10f000) == 0x0210f000) /* ALU s-bit, R15 */ + return INSN_REJECTED; + + /* + * Data processing: 32-bit Immediate + * ALU op : cccc 001x xxxx xxxx xxxx xxxx xxxx xxxx + * MOV : cccc 0011 101x xxxx xxxx xxxx xxxx xxxx + * *S (bit 20) updates condition codes + * ADC/SBC/RSC reads the C flag + */ + insn &= 0xfff00ff0; /* Rn = r0, Rd = r0 */ + asi->insn[0] = insn; + asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ + emulate_alu_imm_rwflags : emulate_alu_imm_rflags; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +space_cccc_0110__1(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* SEL : cccc 0110 1000 xxxx xxxx xxxx 1011 xxxx GE: !!! */ + if ((insn & 0x0ff000f0) == 0x068000b0) { + insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */ + insn |= 0x00000001; /* Rm = r1 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_sel; + return INSN_GOOD; + } + + /* SSAT : cccc 0110 101x xxxx xxxx xxxx xx01 xxxx :Q */ + /* USAT : cccc 0110 111x xxxx xxxx xxxx xx01 xxxx :Q */ + /* SSAT16 : cccc 0110 1010 xxxx xxxx xxxx 0011 xxxx :Q */ + /* USAT16 : cccc 0110 1110 xxxx xxxx xxxx 0011 xxxx :Q */ + if ((insn & 0x0fa00030) == 0x06a00010 || + (insn & 0x0fb000f0) == 0x06a00030) { + insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_sat; + return INSN_GOOD; + } + + /* REV : cccc 0110 1011 xxxx xxxx xxxx 0011 xxxx */ + /* REV16 : cccc 0110 1011 xxxx xxxx xxxx 1011 xxxx */ + /* REVSH : cccc 0110 1111 xxxx xxxx xxxx 1011 xxxx */ + if ((insn & 0x0ff00070) == 0x06b00030 || + (insn & 0x0ff000f0) == 0x06f000b0) + return prep_emulate_rd12rm0(insn, asi); + + /* SADD16 : cccc 0110 0001 xxxx xxxx xxxx 0001 xxxx :GE */ + /* SADDSUBX : cccc 0110 0001 xxxx xxxx xxxx 0011 xxxx :GE */ + /* SSUBADDX : cccc 0110 0001 xxxx xxxx xxxx 0101 xxxx :GE */ + /* SSUB16 : cccc 0110 0001 xxxx xxxx xxxx 0111 xxxx :GE */ + /* SADD8 : cccc 0110 0001 xxxx xxxx xxxx 1001 xxxx :GE */ + /* SSUB8 : cccc 0110 0001 xxxx xxxx xxxx 1111 xxxx :GE */ + /* QADD16 : cccc 0110 0010 xxxx xxxx xxxx 0001 xxxx : */ + /* QADDSUBX : cccc 0110 0010 xxxx xxxx xxxx 0011 xxxx : */ + /* QSUBADDX : cccc 0110 0010 xxxx xxxx xxxx 0101 xxxx : */ + /* QSUB16 : cccc 0110 0010 xxxx xxxx xxxx 0111 xxxx : */ + /* QADD8 : cccc 0110 0010 xxxx xxxx xxxx 1001 xxxx : */ + /* QSUB8 : cccc 0110 0010 xxxx xxxx xxxx 1111 xxxx : */ + /* SHADD16 : cccc 0110 0011 xxxx xxxx xxxx 0001 xxxx : */ + /* SHADDSUBX : cccc 0110 0011 xxxx xxxx xxxx 0011 xxxx : */ + /* SHSUBADDX : cccc 0110 0011 xxxx xxxx xxxx 0101 xxxx : */ + /* SHSUB16 : cccc 0110 0011 xxxx xxxx xxxx 0111 xxxx : */ + /* SHADD8 : cccc 0110 0011 xxxx xxxx xxxx 1001 xxxx : */ + /* SHSUB8 : cccc 0110 0011 xxxx xxxx xxxx 1111 xxxx : */ + /* UADD16 : cccc 0110 0101 xxxx xxxx xxxx 0001 xxxx :GE */ + /* UADDSUBX : cccc 0110 0101 xxxx xxxx xxxx 0011 xxxx :GE */ + /* USUBADDX : cccc 0110 0101 xxxx xxxx xxxx 0101 xxxx :GE */ + /* USUB16 : cccc 0110 0101 xxxx xxxx xxxx 0111 xxxx :GE */ + /* UADD8 : cccc 0110 0101 xxxx xxxx xxxx 1001 xxxx :GE */ + /* USUB8 : cccc 0110 0101 xxxx xxxx xxxx 1111 xxxx :GE */ + /* UQADD16 : cccc 0110 0110 xxxx xxxx xxxx 0001 xxxx : */ + /* UQADDSUBX : cccc 0110 0110 xxxx xxxx xxxx 0011 xxxx : */ + /* UQSUBADDX : cccc 0110 0110 xxxx xxxx xxxx 0101 xxxx : */ + /* UQSUB16 : cccc 0110 0110 xxxx xxxx xxxx 0111 xxxx : */ + /* UQADD8 : cccc 0110 0110 xxxx xxxx xxxx 1001 xxxx : */ + /* UQSUB8 : cccc 0110 0110 xxxx xxxx xxxx 1111 xxxx : */ + /* UHADD16 : cccc 0110 0111 xxxx xxxx xxxx 0001 xxxx : */ + /* UHADDSUBX : cccc 0110 0111 xxxx xxxx xxxx 0011 xxxx : */ + /* UHSUBADDX : cccc 0110 0111 xxxx xxxx xxxx 0101 xxxx : */ + /* UHSUB16 : cccc 0110 0111 xxxx xxxx xxxx 0111 xxxx : */ + /* UHADD8 : cccc 0110 0111 xxxx xxxx xxxx 1001 xxxx : */ + /* UHSUB8 : cccc 0110 0111 xxxx xxxx xxxx 1111 xxxx : */ + /* PKHBT : cccc 0110 1000 xxxx xxxx xxxx x001 xxxx : */ + /* PKHTB : cccc 0110 1000 xxxx xxxx xxxx x101 xxxx : */ + /* SXTAB16 : cccc 0110 1000 xxxx xxxx xxxx 0111 xxxx : */ + /* SXTB : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx : */ + /* SXTAB : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx : */ + /* SXTAH : cccc 0110 1011 xxxx xxxx xxxx 0111 xxxx : */ + /* UXTAB16 : cccc 0110 1100 xxxx xxxx xxxx 0111 xxxx : */ + /* UXTAB : cccc 0110 1110 xxxx xxxx xxxx 0111 xxxx : */ + /* UXTAH : cccc 0110 1111 xxxx xxxx xxxx 0111 xxxx : */ + return prep_emulate_rd12rn16rm0_wflags(insn, asi); +} + +static enum kprobe_insn __kprobes +space_cccc_0111__1(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* Undef : cccc 0111 1111 xxxx xxxx xxxx 1111 xxxx */ + if ((insn & 0x0ff000f0) == 0x03f000f0) + return INSN_REJECTED; + + /* USADA8 : cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx */ + /* USAD8 : cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx */ + if ((insn & 0x0ff000f0) == 0x07800010) + return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); + + /* SMLALD : cccc 0111 0100 xxxx xxxx xxxx 00x1 xxxx */ + /* SMLSLD : cccc 0111 0100 xxxx xxxx xxxx 01x1 xxxx */ + if ((insn & 0x0ff00090) == 0x07400010) + return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi); + + /* SMLAD : cccc 0111 0000 xxxx xxxx xxxx 00x1 xxxx :Q */ + /* SMLSD : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx :Q */ + /* SMMLA : cccc 0111 0101 xxxx xxxx xxxx 00x1 xxxx : */ + /* SMMLS : cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx : */ + if ((insn & 0x0ff00090) == 0x07000010 || + (insn & 0x0ff000d0) == 0x07500010 || + (insn & 0x0ff000d0) == 0x075000d0) + return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); + + /* SMUSD : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx : */ + /* SMUAD : cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx :Q */ + /* SMMUL : cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx : */ + return prep_emulate_rd16rs8rm0_wflags(insn, asi); +} + +static enum kprobe_insn __kprobes +space_cccc_01xx(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* LDR : cccc 01xx x0x1 xxxx xxxx xxxx xxxx xxxx */ + /* LDRB : cccc 01xx x1x1 xxxx xxxx xxxx xxxx xxxx */ + /* LDRBT : cccc 01x0 x111 xxxx xxxx xxxx xxxx xxxx */ + /* LDRT : cccc 01x0 x011 xxxx xxxx xxxx xxxx xxxx */ + /* STR : cccc 01xx x0x0 xxxx xxxx xxxx xxxx xxxx */ + /* STRB : cccc 01xx x1x0 xxxx xxxx xxxx xxxx xxxx */ + /* STRBT : cccc 01x0 x110 xxxx xxxx xxxx xxxx xxxx */ + /* STRT : cccc 01x0 x010 xxxx xxxx xxxx xxxx xxxx */ + return prep_emulate_ldr_str(insn, asi); +} + +static enum kprobe_insn __kprobes +space_cccc_100x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* LDM(2) : cccc 100x x101 xxxx 0xxx xxxx xxxx xxxx */ + /* LDM(3) : cccc 100x x1x1 xxxx 1xxx xxxx xxxx xxxx */ + if ((insn & 0x0e708000) == 0x85000000 || + (insn & 0x0e508000) == 0x85010000) + return INSN_REJECTED; + + /* LDM(1) : cccc 100x x0x1 xxxx xxxx xxxx xxxx xxxx */ + /* STM(1) : cccc 100x x0x0 xxxx xxxx xxxx xxxx xxxx */ + asi->insn[0] = truecc_insn(insn); + asi->insn_handler = ((insn & 0x108000) == 0x008000) ? /* STM & R15 */ + simulate_stm1_pc : simulate_ldm1stm1; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +space_cccc_101x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* B : cccc 1010 xxxx xxxx xxxx xxxx xxxx xxxx */ + /* BL : cccc 1011 xxxx xxxx xxxx xxxx xxxx xxxx */ + asi->insn[0] = truecc_insn(insn); + asi->insn_handler = simulate_bbl; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +space_cccc_1100_010x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* MCRR : cccc 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */ + /* MRRC : cccc 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */ + insn &= 0xfff00fff; + insn |= 0x00001000; /* Rn = r0, Rd = r1 */ + asi->insn[0] = insn; + asi->insn_handler = (insn & (1 << 20)) ? emulate_mrrc : emulate_mcrr; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +space_cccc_110x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* LDC : cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */ + /* STC : cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */ + insn &= 0xfff0ffff; /* Rn = r0 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_ldcstc; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +space_cccc_111x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */ + /* SWI : cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */ + if ((insn & 0xfff000f0) == 0xe1200070 || + (insn & 0x0f000000) == 0x0f000000) + return INSN_REJECTED; + + /* CDP : cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */ + if ((insn & 0x0f000010) == 0x0e000000) { + asi->insn[0] = insn; + asi->insn_handler = emulate_none; + return INSN_GOOD; + } + + /* MCR : cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */ + /* MRC : cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */ + insn &= 0xffff0fff; /* Rd = r0 */ + asi->insn[0] = insn; + asi->insn_handler = (insn & (1 << 20)) ? emulate_rd12 : emulate_ird12; + return INSN_GOOD; +} + +/* Return: + * INSN_REJECTED If instruction is one not allowed to kprobe, + * INSN_GOOD If instruction is supported and uses instruction slot, + * INSN_GOOD_NO_SLOT If instruction is supported but doesn't use its slot. + * + * For instructions we don't want to kprobe (INSN_REJECTED return result): + * These are generally ones that modify the processor state making + * them "hard" to simulate such as switches processor modes or + * make accesses in alternate modes. Any of these could be simulated + * if the work was put into it, but low return considering they + * should also be very rare. + */ +enum kprobe_insn __kprobes +arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + asi->insn[1] = KPROBE_RETURN_INSTRUCTION; + + if ((insn & 0xf0000000) == 0xf0000000) { + + return space_1111(insn, asi); + + } else if ((insn & 0x0e000000) == 0x00000000) { + + return space_cccc_000x(insn, asi); + + } else if ((insn & 0x0e000000) == 0x02000000) { + + return space_cccc_001x(insn, asi); + + } else if ((insn & 0x0f000010) == 0x06000010) { + + return space_cccc_0110__1(insn, asi); + + } else if ((insn & 0x0f000010) == 0x07000010) { + + return space_cccc_0111__1(insn, asi); + + } else if ((insn & 0x0c000000) == 0x04000000) { + + return space_cccc_01xx(insn, asi); + + } else if ((insn & 0x0e000000) == 0x08000000) { + + return space_cccc_100x(insn, asi); + + } else if ((insn & 0x0e000000) == 0x0a000000) { + + return space_cccc_101x(insn, asi); + + } else if ((insn & 0x0fe00000) == 0x0c400000) { + + return space_cccc_1100_010x(insn, asi); + + } else if ((insn & 0x0e000000) == 0x0c400000) { + + return space_cccc_110x(insn, asi); + + } + + return space_cccc_111x(insn, asi); +} + +void __init arm_kprobe_decode_init(void) +{ + find_str_pc_offset(); +} + + +/* + * All ARM instructions listed below. + * + * Instructions and their general purpose registers are given. + * If a particular register may not use R15, it is prefixed with a "!". + * If marked with a "*" means the value returned by reading R15 + * is implementation defined. + * + * ADC/ADD/AND/BIC/CMN/CMP/EOR/MOV/MVN/ORR/RSB/RSC/SBC/SUB/TEQ + * TST: Rd, Rn, Rm, !Rs + * BX: Rm + * BLX(2): !Rm + * BX: Rm (R15 legal, but discouraged) + * BXJ: !Rm, + * CLZ: !Rd, !Rm + * CPY: Rd, Rm + * LDC/2,STC/2 immediate offset & unindex: Rn + * LDC/2,STC/2 immediate pre/post-indexed: !Rn + * LDM(1/3): !Rn, register_list + * LDM(2): !Rn, !register_list + * LDR,STR,PLD immediate offset: Rd, Rn + * LDR,STR,PLD register offset: Rd, Rn, !Rm + * LDR,STR,PLD scaled register offset: Rd, !Rn, !Rm + * LDR,STR immediate pre/post-indexed: Rd, !Rn + * LDR,STR register pre/post-indexed: Rd, !Rn, !Rm + * LDR,STR scaled register pre/post-indexed: Rd, !Rn, !Rm + * LDRB,STRB immediate offset: !Rd, Rn + * LDRB,STRB register offset: !Rd, Rn, !Rm + * LDRB,STRB scaled register offset: !Rd, !Rn, !Rm + * LDRB,STRB immediate pre/post-indexed: !Rd, !Rn + * LDRB,STRB register pre/post-indexed: !Rd, !Rn, !Rm + * LDRB,STRB scaled register pre/post-indexed: !Rd, !Rn, !Rm + * LDRT,LDRBT,STRBT immediate pre/post-indexed: !Rd, !Rn + * LDRT,LDRBT,STRBT register pre/post-indexed: !Rd, !Rn, !Rm + * LDRT,LDRBT,STRBT scaled register pre/post-indexed: !Rd, !Rn, !Rm + * LDRH/SH/SB/D,STRH/SH/SB/D immediate offset: !Rd, Rn + * LDRH/SH/SB/D,STRH/SH/SB/D register offset: !Rd, Rn, !Rm + * LDRH/SH/SB/D,STRH/SH/SB/D immediate pre/post-indexed: !Rd, !Rn + * LDRH/SH/SB/D,STRH/SH/SB/D register pre/post-indexed: !Rd, !Rn, !Rm + * LDREX: !Rd, !Rn + * MCR/2: !Rd + * MCRR/2,MRRC/2: !Rd, !Rn + * MLA: !Rd, !Rn, !Rm, !Rs + * MOV: Rd + * MRC/2: !Rd (if Rd==15, only changes cond codes, not the register) + * MRS,MSR: !Rd + * MUL: !Rd, !Rm, !Rs + * PKH{BT,TB}: !Rd, !Rn, !Rm + * QDADD,[U]QADD/16/8/SUBX: !Rd, !Rm, !Rn + * QDSUB,[U]QSUB/16/8/ADDX: !Rd, !Rm, !Rn + * REV/16/SH: !Rd, !Rm + * RFE: !Rn + * {S,U}[H]ADD{16,8,SUBX},{S,U}[H]SUB{16,8,ADDX}: !Rd, !Rn, !Rm + * SEL: !Rd, !Rn, !Rm + * SMLA<x><y>,SMLA{D,W<y>},SMLSD,SMML{A,S}: !Rd, !Rn, !Rm, !Rs + * SMLAL<x><y>,SMLA{D,LD},SMLSLD,SMMULL,SMULW<y>: !RdHi, !RdLo, !Rm, !Rs + * SMMUL,SMUAD,SMUL<x><y>,SMUSD: !Rd, !Rm, !Rs + * SSAT/16: !Rd, !Rm + * STM(1/2): !Rn, register_list* (R15 in reg list not recommended) + * STRT immediate pre/post-indexed: Rd*, !Rn + * STRT register pre/post-indexed: Rd*, !Rn, !Rm + * STRT scaled register pre/post-indexed: Rd*, !Rn, !Rm + * STREX: !Rd, !Rn, !Rm + * SWP/B: !Rd, !Rn, !Rm + * {S,U}XTA{B,B16,H}: !Rd, !Rn, !Rm + * {S,U}XT{B,B16,H}: !Rd, !Rm + * UM{AA,LA,UL}L: !RdHi, !RdLo, !Rm, !Rs + * USA{D8,A8,T,T16}: !Rd, !Rm, !Rs + * + * May transfer control by writing R15 (possible mode changes or alternate + * mode accesses marked by "*"): + * ALU op (* with s-bit), B, BL, BKPT, BLX(1/2), BX, BXJ, CPS*, CPY, + * LDM(1), LDM(2/3)*, LDR, MOV, RFE*, SWI* + * + * Instructions that do not take general registers, nor transfer control: + * CDP/2, SETEND, SRS* + */ diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c new file mode 100644 index 00000000000..a22a98c43ca --- /dev/null +++ b/arch/arm/kernel/kprobes.c @@ -0,0 +1,447 @@ +/* + * arch/arm/kernel/kprobes.c + * + * Kprobes on ARM + * + * Abhishek Sagar <sagar.abhishek@gmail.com> + * Copyright (C) 2006, 2007 Motorola Inc. + * + * Nicolas Pitre <nico@marvell.com> + * Copyright (C) 2007 Marvell Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/kprobes.h> +#include <linux/module.h> +#include <linux/stringify.h> +#include <asm/traps.h> +#include <asm/cacheflush.h> + +#define MIN_STACK_SIZE(addr) \ + min((unsigned long)MAX_STACK_SIZE, \ + (unsigned long)current_thread_info() + THREAD_START_SP - (addr)) + +#define flush_insns(addr, cnt) \ + flush_icache_range((unsigned long)(addr), \ + (unsigned long)(addr) + \ + sizeof(kprobe_opcode_t) * (cnt)) + +/* Used as a marker in ARM_pc to note when we're in a jprobe. */ +#define JPROBE_MAGIC_ADDR 0xffffffff + +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); + + +int __kprobes arch_prepare_kprobe(struct kprobe *p) +{ + kprobe_opcode_t insn; + kprobe_opcode_t tmp_insn[MAX_INSN_SIZE]; + unsigned long addr = (unsigned long)p->addr; + int is; + + if (addr & 0x3 || in_exception_text(addr)) + return -EINVAL; + + insn = *p->addr; + p->opcode = insn; + p->ainsn.insn = tmp_insn; + + switch (arm_kprobe_decode_insn(insn, &p->ainsn)) { + case INSN_REJECTED: /* not supported */ + return -EINVAL; + + case INSN_GOOD: /* instruction uses slot */ + p->ainsn.insn = get_insn_slot(); + if (!p->ainsn.insn) + return -ENOMEM; + for (is = 0; is < MAX_INSN_SIZE; ++is) + p->ainsn.insn[is] = tmp_insn[is]; + flush_insns(&p->ainsn.insn, MAX_INSN_SIZE); + break; + + case INSN_GOOD_NO_SLOT: /* instruction doesn't need insn slot */ + p->ainsn.insn = NULL; + break; + } + + return 0; +} + +void __kprobes arch_arm_kprobe(struct kprobe *p) +{ + *p->addr = KPROBE_BREAKPOINT_INSTRUCTION; + flush_insns(p->addr, 1); +} + +void __kprobes arch_disarm_kprobe(struct kprobe *p) +{ + *p->addr = p->opcode; + flush_insns(p->addr, 1); +} + +void __kprobes arch_remove_kprobe(struct kprobe *p) +{ + if (p->ainsn.insn) { + mutex_lock(&kprobe_mutex); + free_insn_slot(p->ainsn.insn, 0); + mutex_unlock(&kprobe_mutex); + p->ainsn.insn = NULL; + } +} + +static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb) +{ + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; +} + +static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb) +{ + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; +} + +static void __kprobes set_current_kprobe(struct kprobe *p) +{ + __get_cpu_var(current_kprobe) = p; +} + +static void __kprobes singlestep(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) +{ + regs->ARM_pc += 4; + p->ainsn.insn_handler(p, regs); +} + +/* + * Called with IRQs disabled. IRQs must remain disabled from that point + * all the way until processing this kprobe is complete. The current + * kprobes implementation cannot process more than one nested level of + * kprobe, and that level is reserved for user kprobe handlers, so we can't + * risk encountering a new kprobe in an interrupt handler. + */ +void __kprobes kprobe_handler(struct pt_regs *regs) +{ + struct kprobe *p, *cur; + struct kprobe_ctlblk *kcb; + kprobe_opcode_t *addr = (kprobe_opcode_t *)regs->ARM_pc; + + kcb = get_kprobe_ctlblk(); + cur = kprobe_running(); + p = get_kprobe(addr); + + if (p) { + if (cur) { + /* Kprobe is pending, so we're recursing. */ + switch (kcb->kprobe_status) { + case KPROBE_HIT_ACTIVE: + case KPROBE_HIT_SSDONE: + /* A pre- or post-handler probe got us here. */ + kprobes_inc_nmissed_count(p); + save_previous_kprobe(kcb); + set_current_kprobe(p); + kcb->kprobe_status = KPROBE_REENTER; + singlestep(p, regs, kcb); + restore_previous_kprobe(kcb); + break; + default: + /* impossible cases */ + BUG(); + } + } else { + set_current_kprobe(p); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; + + /* + * If we have no pre-handler or it returned 0, we + * continue with normal processing. If we have a + * pre-handler and it returned non-zero, it prepped + * for calling the break_handler below on re-entry, + * so get out doing nothing more here. + */ + if (!p->pre_handler || !p->pre_handler(p, regs)) { + kcb->kprobe_status = KPROBE_HIT_SS; + singlestep(p, regs, kcb); + if (p->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + p->post_handler(p, regs, 0); + } + reset_current_kprobe(); + } + } + } else if (cur) { + /* We probably hit a jprobe. Call its break handler. */ + if (cur->break_handler && cur->break_handler(cur, regs)) { + kcb->kprobe_status = KPROBE_HIT_SS; + singlestep(cur, regs, kcb); + if (cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); + } + } + reset_current_kprobe(); + } else { + /* + * The probe was removed and a race is in progress. + * There is nothing we can do about it. Let's restart + * the instruction. By the time we can restart, the + * real instruction will be there. + */ + } +} + +int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr) +{ + kprobe_handler(regs); + return 0; +} + +int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr) +{ + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + switch (kcb->kprobe_status) { + case KPROBE_HIT_SS: + case KPROBE_REENTER: + /* + * We are here because the instruction being single + * stepped caused a page fault. We reset the current + * kprobe and the PC to point back to the probe address + * and allow the page fault handler to continue as a + * normal page fault. + */ + regs->ARM_pc = (long)cur->addr; + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); + } else { + reset_current_kprobe(); + } + break; + + case KPROBE_HIT_ACTIVE: + case KPROBE_HIT_SSDONE: + /* + * We increment the nmissed count for accounting, + * we can also use npre/npostfault count for accounting + * these specific fault cases. + */ + kprobes_inc_nmissed_count(cur); + + /* + * We come here because instructions in the pre/post + * handler caused the page_fault, this could happen + * if handler tries to access user space by + * copy_from_user(), get_user() etc. Let the + * user-specified handler try to fix it. + */ + if (cur->fault_handler && cur->fault_handler(cur, regs, fsr)) + return 1; + break; + + default: + break; + } + + return 0; +} + +int __kprobes kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) +{ + /* + * notify_die() is currently never called on ARM, + * so this callback is currently empty. + */ + return NOTIFY_DONE; +} + +/* + * When a retprobed function returns, trampoline_handler() is called, + * calling the kretprobe's handler. We construct a struct pt_regs to + * give a view of registers r0-r11 to the user return-handler. This is + * not a complete pt_regs structure, but that should be plenty sufficient + * for kretprobe handlers which should normally be interested in r0 only + * anyway. + */ +static void __attribute__((naked)) __kprobes kretprobe_trampoline(void) +{ + __asm__ __volatile__ ( + "stmdb sp!, {r0 - r11} \n\t" + "mov r0, sp \n\t" + "bl trampoline_handler \n\t" + "mov lr, r0 \n\t" + "ldmia sp!, {r0 - r11} \n\t" + "mov pc, lr \n\t" + : : : "memory"); +} + +/* Called from kretprobe_trampoline */ +static __used __kprobes void *trampoline_handler(struct pt_regs *regs) +{ + struct kretprobe_instance *ri = NULL; + struct hlist_head *head, empty_rp; + struct hlist_node *node, *tmp; + unsigned long flags, orig_ret_address = 0; + unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline; + + INIT_HLIST_HEAD(&empty_rp); + spin_lock_irqsave(&kretprobe_lock, flags); + head = kretprobe_inst_table_head(current); + + /* + * It is possible to have multiple instances associated with a given + * task either because multiple functions in the call path have + * a return probe installed on them, and/or more than one return + * probe was registered for a target function. + * + * We can handle this because: + * - instances are always inserted at the head of the list + * - when multiple return probes are registered for the same + * function, the first instance's ret_addr will point to the + * real return address, and all the rest will point to + * kretprobe_trampoline + */ + hlist_for_each_entry_safe(ri, node, tmp, head, hlist) { + if (ri->task != current) + /* another task is sharing our hash bucket */ + continue; + + if (ri->rp && ri->rp->handler) { + __get_cpu_var(current_kprobe) = &ri->rp->kp; + get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE; + ri->rp->handler(ri, regs); + __get_cpu_var(current_kprobe) = NULL; + } + + orig_ret_address = (unsigned long)ri->ret_addr; + recycle_rp_inst(ri, &empty_rp); + + if (orig_ret_address != trampoline_address) + /* + * This is the real return address. Any other + * instances associated with this task are for + * other calls deeper on the call stack + */ + break; + } + + kretprobe_assert(ri, orig_ret_address, trampoline_address); + spin_unlock_irqrestore(&kretprobe_lock, flags); + + hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) { + hlist_del(&ri->hlist); + kfree(ri); + } + + return (void *)orig_ret_address; +} + +/* Called with kretprobe_lock held. */ +void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri, + struct pt_regs *regs) +{ + ri->ret_addr = (kprobe_opcode_t *)regs->ARM_lr; + + /* Replace the return addr with trampoline addr. */ + regs->ARM_lr = (unsigned long)&kretprobe_trampoline; +} + +int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) +{ + struct jprobe *jp = container_of(p, struct jprobe, kp); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + long sp_addr = regs->ARM_sp; + + kcb->jprobe_saved_regs = *regs; + memcpy(kcb->jprobes_stack, (void *)sp_addr, MIN_STACK_SIZE(sp_addr)); + regs->ARM_pc = (long)jp->entry; + regs->ARM_cpsr |= PSR_I_BIT; + preempt_disable(); + return 1; +} + +void __kprobes jprobe_return(void) +{ + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + __asm__ __volatile__ ( + /* + * Setup an empty pt_regs. Fill SP and PC fields as + * they're needed by longjmp_break_handler. + */ + "sub sp, %0, %1 \n\t" + "ldr r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t" + "str %0, [sp, %2] \n\t" + "str r0, [sp, %3] \n\t" + "mov r0, sp \n\t" + "bl kprobe_handler \n\t" + + /* + * Return to the context saved by setjmp_pre_handler + * and restored by longjmp_break_handler. + */ + "ldr r0, [sp, %4] \n\t" + "msr cpsr_cxsf, r0 \n\t" + "ldmia sp, {r0 - pc} \n\t" + : + : "r" (kcb->jprobe_saved_regs.ARM_sp), + "I" (sizeof(struct pt_regs)), + "J" (offsetof(struct pt_regs, ARM_sp)), + "J" (offsetof(struct pt_regs, ARM_pc)), + "J" (offsetof(struct pt_regs, ARM_cpsr)) + : "memory", "cc"); +} + +int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) +{ + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + long stack_addr = kcb->jprobe_saved_regs.ARM_sp; + long orig_sp = regs->ARM_sp; + struct jprobe *jp = container_of(p, struct jprobe, kp); + + if (regs->ARM_pc == JPROBE_MAGIC_ADDR) { + if (orig_sp != stack_addr) { + struct pt_regs *saved_regs = + (struct pt_regs *)kcb->jprobe_saved_regs.ARM_sp; + printk("current sp %lx does not match saved sp %lx\n", + orig_sp, stack_addr); + printk("Saved registers for jprobe %p\n", jp); + show_regs(saved_regs); + printk("Current registers\n"); + show_regs(regs); + BUG(); + } + *regs = kcb->jprobe_saved_regs; + memcpy((void *)stack_addr, kcb->jprobes_stack, + MIN_STACK_SIZE(stack_addr)); + preempt_enable_no_resched(); + return 1; + } + return 0; +} + +static struct undef_hook kprobes_break_hook = { + .instr_mask = 0xffffffff, + .instr_val = KPROBE_BREAKPOINT_INSTRUCTION, + .cpsr_mask = MODE_MASK, + .cpsr_val = SVC_MODE, + .fn = kprobe_trap_handler, +}; + +int __init arch_init_kprobes() +{ + arm_kprobe_decode_init(); + register_undef_hook(&kprobes_break_hook); + return 0; +} diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index e59b5b84168..b5867eca1d0 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -325,7 +325,9 @@ void timer_tick(void) profile_tick(CPU_PROFILING); do_leds(); do_set_rtc(); + write_seqlock(&xtime_lock); do_timer(1); + write_sequnlock(&xtime_lock); #ifndef CONFIG_SMP update_process_times(user_mode(get_irq_regs())); #endif diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index c34db4e868f..5595fdd75e8 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -19,6 +19,7 @@ #include <linux/kallsyms.h> #include <linux/delay.h> #include <linux/init.h> +#include <linux/kprobes.h> #include <asm/atomic.h> #include <asm/cacheflush.h> @@ -46,15 +47,6 @@ __setup("user_debug=", user_debug_setup); static void dump_mem(const char *str, unsigned long bottom, unsigned long top); -static inline int in_exception_text(unsigned long ptr) -{ - extern char __exception_text_start[]; - extern char __exception_text_end[]; - - return ptr >= (unsigned long)&__exception_text_start && - ptr < (unsigned long)&__exception_text_end; -} - void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame) { #ifdef CONFIG_KALLSYMS @@ -322,6 +314,17 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) get_user(instr, (u32 __user *)pc); } +#ifdef CONFIG_KPROBES + /* + * It is possible to have recursive kprobes, so we can't call + * the kprobe trap handler with the undef_lock held. + */ + if (instr == KPROBE_BREAKPOINT_INSTRUCTION && !user_mode(regs)) { + kprobe_trap_handler(regs, instr); + return; + } +#endif + spin_lock_irqsave(&undef_lock, flags); list_for_each_entry(hook, &undef_hook, node) { if ((instr & hook->instr_mask) == hook->instr_val && diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 5ff5406666b..30f732c7fdb 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -94,6 +94,7 @@ SECTIONS TEXT_TEXT SCHED_TEXT LOCK_TEXT + KPROBES_TEXT #ifdef CONFIG_MMU *(.fixup) #endif diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c index 0446ef2f5bd..b016be2b0e3 100644 --- a/arch/arm/mach-aaec2000/core.c +++ b/arch/arm/mach-aaec2000/core.c @@ -130,13 +130,9 @@ static irqreturn_t aaec2000_timer_interrupt(int irq, void *dev_id) { /* TODO: Check timer accuracy */ - write_seqlock(&xtime_lock); - timer_tick(); TIMER1_CLEAR = 1; - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 05a9f8a1b45..5b0422cdde7 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -22,6 +22,9 @@ config ARCH_AT91SAM9263 config ARCH_AT91SAM9RL bool "AT91SAM9RL" +config ARCH_AT91CAP9 + bool "AT91CAP9" + config ARCH_AT91X40 bool "AT91x40" @@ -178,6 +181,21 @@ endif # ---------------------------------------------------------- +if ARCH_AT91CAP9 + +comment "AT91CAP9 Board Type" + +config MACH_AT91CAP9ADK + bool "Atmel AT91CAP9A-DK Evaluation Kit" + depends on ARCH_AT91CAP9 + help + Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138> + +endif + +# ---------------------------------------------------------- + if ARCH_AT91X40 comment "AT91X40 Board Type" @@ -198,13 +216,13 @@ comment "AT91 Board Options" config MTD_AT91_DATAFLASH_CARD bool "Enable DataFlash Card support" - depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK) + depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK) help Enable support for the DataFlash card. config MTD_NAND_AT91_BUSWIDTH_16 bool "Enable 16-bit data bus interface to NAND flash" - depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK) + depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK) help On AT91SAM926x boards both types of NAND flash can be present (8 and 16 bit data bus width). @@ -219,6 +237,22 @@ config AT91_PROGRAMMABLE_CLOCKS Select this if you need to program one or more of the PCK0..PCK3 programmable clock outputs. +config AT91_TIMER_HZ + int "Kernel HZ (jiffies per second)" + range 32 1024 + depends on ARCH_AT91 + default "128" if ARCH_AT91RM9200 + default "100" + help + On AT91rm9200 chips where you're using a system clock derived + from the 32768 Hz hardware clock, this tick rate should divide + it exactly: use a power-of-two value, such as 128 or 256, to + reduce timing errors caused by rounding. + + On AT91sam926x chips, or otherwise when using a higher precision + system clock (of at least several MHz), rounding is less of a + problem so it can be safer to use a decimal values like 100. + endmenu endif diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index a21f08c64ea..bf5f293dccf 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -8,7 +8,6 @@ obj-n := obj- := obj-$(CONFIG_AT91_PMC_UNIT) += clock.o -obj-$(CONFIG_PM) += pm.o # CPU-specific support obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o @@ -16,6 +15,7 @@ obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_d obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o +obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o # AT91RM9200 board-specific support @@ -29,7 +29,6 @@ obj-$(CONFIG_MACH_KB9200) += board-kb9202.o obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o obj-$(CONFIG_MACH_KAFA) += board-kafa.o obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o -obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o # AT91SAM9260 board-specific support obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o @@ -43,19 +42,17 @@ obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o # AT91SAM9RL board-specific support obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o -# LEDs support -led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o -led-$(CONFIG_MACH_AT91RM9200EK) += leds.o -led-$(CONFIG_MACH_AT91SAM9261EK)+= leds.o -led-$(CONFIG_MACH_CSB337) += leds.o -led-$(CONFIG_MACH_CSB637) += leds.o -led-$(CONFIG_MACH_KB9200) += leds.o -led-$(CONFIG_MACH_KAFA) += leds.o -obj-$(CONFIG_LEDS) += $(led-y) +# AT91CAP9 board-specific support +obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o -# VGA support -#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o +# AT91X40 board-specific support +obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o +# Drivers +obj-y += leds.o + +# Power Management +obj-$(CONFIG_PM) += pm.o ifeq ($(CONFIG_PM_DEBUG),y) CFLAGS_pm.o += -DDEBUG diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot index e667dcc7cd3..071a2506a69 100644 --- a/arch/arm/mach-at91/Makefile.boot +++ b/arch/arm/mach-at91/Makefile.boot @@ -3,7 +3,12 @@ # PARAMS_PHYS must be within 4MB of ZRELADDR # INITRD_PHYS must be in RAM +ifeq ($(CONFIG_ARCH_AT91CAP9),y) + zreladdr-y := 0x70008000 +params_phys-y := 0x70000100 +initrd_phys-y := 0x70410000 +else zreladdr-y := 0x20008000 params_phys-y := 0x20000100 initrd_phys-y := 0x20410000 - +endif diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c new file mode 100644 index 00000000000..48d27d8000b --- /dev/null +++ b/arch/arm/mach-at91/at91cap9.c @@ -0,0 +1,365 @@ +/* + * arch/arm/mach-at91/at91cap9.c + * + * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> + * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> + * Copyright (C) 2007 Atmel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/module.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/arch/at91cap9.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> + +#include "generic.h" +#include "clock.h" + +static struct map_desc at91cap9_io_desc[] __initdata = { + { + .virtual = AT91_VA_BASE_SYS, + .pfn = __phys_to_pfn(AT91_BASE_SYS), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_IO_VIRT_BASE - AT91CAP9_SRAM_SIZE, + .pfn = __phys_to_pfn(AT91CAP9_SRAM_BASE), + .length = AT91CAP9_SRAM_SIZE, + .type = MT_DEVICE, + }, +}; + +/* -------------------------------------------------------------------- + * Clocks + * -------------------------------------------------------------------- */ + +/* + * The peripheral clocks. + */ +static struct clk pioABCD_clk = { + .name = "pioABCD_clk", + .pmc_mask = 1 << AT91CAP9_ID_PIOABCD, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mpb0_clk = { + .name = "mpb0_clk", + .pmc_mask = 1 << AT91CAP9_ID_MPB0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mpb1_clk = { + .name = "mpb1_clk", + .pmc_mask = 1 << AT91CAP9_ID_MPB1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mpb2_clk = { + .name = "mpb2_clk", + .pmc_mask = 1 << AT91CAP9_ID_MPB2, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mpb3_clk = { + .name = "mpb3_clk", + .pmc_mask = 1 << AT91CAP9_ID_MPB3, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mpb4_clk = { + .name = "mpb4_clk", + .pmc_mask = 1 << AT91CAP9_ID_MPB4, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart0_clk = { + .name = "usart0_clk", + .pmc_mask = 1 << AT91CAP9_ID_US0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart1_clk = { + .name = "usart1_clk", + .pmc_mask = 1 << AT91CAP9_ID_US1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart2_clk = { + .name = "usart2_clk", + .pmc_mask = 1 << AT91CAP9_ID_US2, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc0_clk = { + .name = "mci0_clk", + .pmc_mask = 1 << AT91CAP9_ID_MCI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc1_clk = { + .name = "mci1_clk", + .pmc_mask = 1 << AT91CAP9_ID_MCI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk can_clk = { + .name = "can_clk", + .pmc_mask = 1 << AT91CAP9_ID_CAN, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk twi_clk = { + .name = "twi_clk", + .pmc_mask = 1 << AT91CAP9_ID_TWI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi0_clk = { + .name = "spi0_clk", + .pmc_mask = 1 << AT91CAP9_ID_SPI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi1_clk = { + .name = "spi1_clk", + .pmc_mask = 1 << AT91CAP9_ID_SPI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ssc0_clk = { + .name = "ssc0_clk", + .pmc_mask = 1 << AT91CAP9_ID_SSC0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ssc1_clk = { + .name = "ssc1_clk", + .pmc_mask = 1 << AT91CAP9_ID_SSC1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ac97_clk = { + .name = "ac97_clk", + .pmc_mask = 1 << AT91CAP9_ID_AC97C, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tcb_clk = { + .name = "tcb_clk", + .pmc_mask = 1 << AT91CAP9_ID_TCB, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pwmc_clk = { + .name = "pwmc_clk", + .pmc_mask = 1 << AT91CAP9_ID_PWMC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk macb_clk = { + .name = "macb_clk", + .pmc_mask = 1 << AT91CAP9_ID_EMAC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk aestdes_clk = { + .name = "aestdes_clk", + .pmc_mask = 1 << AT91CAP9_ID_AESTDES, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk adc_clk = { + .name = "adc_clk", + .pmc_mask = 1 << AT91CAP9_ID_ADC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk isi_clk = { + .name = "isi_clk", + .pmc_mask = 1 << AT91CAP9_ID_ISI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk lcdc_clk = { + .name = "lcdc_clk", + .pmc_mask = 1 << AT91CAP9_ID_LCDC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk dma_clk = { + .name = "dma_clk", + .pmc_mask = 1 << AT91CAP9_ID_DMA, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk udphs_clk = { + .name = "udphs_clk", + .pmc_mask = 1 << AT91CAP9_ID_UDPHS, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ohci_clk = { + .name = "ohci_clk", + .pmc_mask = 1 << AT91CAP9_ID_UHP, + .type = CLK_TYPE_PERIPHERAL, +}; + +static struct clk *periph_clocks[] __initdata = { + &pioABCD_clk, + &mpb0_clk, + &mpb1_clk, + &mpb2_clk, + &mpb3_clk, + &mpb4_clk, + &usart0_clk, + &usart1_clk, + &usart2_clk, + &mmc0_clk, + &mmc1_clk, + &can_clk, + &twi_clk, + &spi0_clk, + &spi1_clk, + &ssc0_clk, + &ssc1_clk, + &ac97_clk, + &tcb_clk, + &pwmc_clk, + &macb_clk, + &aestdes_clk, + &adc_clk, + &isi_clk, + &lcdc_clk, + &dma_clk, + &udphs_clk, + &ohci_clk, + // irq0 .. irq1 +}; + +/* + * The four programmable clocks. + * You must configure pin multiplexing to bring these signals out. + */ +static struct clk pck0 = { + .name = "pck0", + .pmc_mask = AT91_PMC_PCK0, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 0, +}; +static struct clk pck1 = { + .name = "pck1", + .pmc_mask = AT91_PMC_PCK1, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 1, +}; +static struct clk pck2 = { + .name = "pck2", + .pmc_mask = AT91_PMC_PCK2, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 2, +}; +static struct clk pck3 = { + .name = "pck3", + .pmc_mask = AT91_PMC_PCK3, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 3, +}; + +static void __init at91cap9_register_clocks(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) + clk_register(periph_clocks[i]); + + clk_register(&pck0); + clk_register(&pck1); + clk_register(&pck2); + clk_register(&pck3); +} + +/* -------------------------------------------------------------------- + * GPIO + * -------------------------------------------------------------------- */ + +static struct at91_gpio_bank at91cap9_gpio[] = { + { + .id = AT91CAP9_ID_PIOABCD, + .offset = AT91_PIOA, + .clock = &pioABCD_clk, + }, { + .id = AT91CAP9_ID_PIOABCD, + .offset = AT91_PIOB, + .clock = &pioABCD_clk, + }, { + .id = AT91CAP9_ID_PIOABCD, + .offset = AT91_PIOC, + .clock = &pioABCD_clk, + }, { + .id = AT91CAP9_ID_PIOABCD, + .offset = AT91_PIOD, + .clock = &pioABCD_clk, + } +}; + +static void at91cap9_reset(void) +{ + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); +} + +/* -------------------------------------------------------------------- + * AT91CAP9 processor initialization + * -------------------------------------------------------------------- */ + +void __init at91cap9_initialize(unsigned long main_clock) +{ + /* Map peripherals */ + iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc)); + + at91_arch_reset = at91cap9_reset; + at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); + + /* Init clock subsystem */ + at91_clock_init(main_clock); + + /* Register the processor-specific clocks */ + at91cap9_register_clocks(); + + /* Register GPIO subsystem */ + at91_gpio_init(at91cap9_gpio, 4); +} + +/* -------------------------------------------------------------------- + * Interrupt initialization + * -------------------------------------------------------------------- */ + +/* + * The default interrupt priority levels (0 = lowest, 7 = highest). + */ +static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller (FIQ) */ + 7, /* System Peripherals */ + 1, /* Parallel IO Controller A, B, C and D */ + 0, /* MP Block Peripheral 0 */ + 0, /* MP Block Peripheral 1 */ + 0, /* MP Block Peripheral 2 */ + 0, /* MP Block Peripheral 3 */ + 0, /* MP Block Peripheral 4 */ + 5, /* USART 0 */ + 5, /* USART 1 */ + 5, /* USART 2 */ + 0, /* Multimedia Card Interface 0 */ + 0, /* Multimedia Card Interface 1 */ + 3, /* CAN */ + 6, /* Two-Wire Interface */ + 5, /* Serial Peripheral Interface 0 */ + 5, /* Serial Peripheral Interface 1 */ + 4, /* Serial Synchronous Controller 0 */ + 4, /* Serial Synchronous Controller 1 */ + 5, /* AC97 Controller */ + 0, /* Timer Counter 0, 1 and 2 */ + 0, /* Pulse Width Modulation Controller */ + 3, /* Ethernet */ + 0, /* Advanced Encryption Standard, Triple DES*/ + 0, /* Analog-to-Digital Converter */ + 0, /* Image Sensor Interface */ + 3, /* LCD Controller */ + 0, /* DMA Controller */ + 2, /* USB Device Port */ + 2, /* USB Host port */ + 0, /* Advanced Interrupt Controller (IRQ0) */ + 0, /* Advanced Interrupt Controller (IRQ1) */ +}; + +void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS]) +{ + if (!priority) + priority = at91cap9_default_irq_priority; + + /* Initialize the AIC interrupt controller */ + at91_aic_init(priority); + + /* Enable GPIO interrupts */ + at91_gpio_irq_setup(); +} diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c new file mode 100644 index 00000000000..c50fad9cd14 --- /dev/null +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -0,0 +1,1066 @@ +/* + * arch/arm/mach-at91/at91cap9_devices.c + * + * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> + * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> + * Copyright (C) 2007 Atmel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> + +#include <video/atmel_lcdc.h> + +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91cap9.h> +#include <asm/arch/at91sam926x_mc.h> +#include <asm/arch/at91cap9_matrix.h> + +#include "generic.h" + + +/* -------------------------------------------------------------------- + * USB Host + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static u64 ohci_dmamask = DMA_BIT_MASK(32); +static struct at91_usbh_data usbh_data; + +static struct resource usbh_resources[] = { + [0] = { + .start = AT91CAP9_UHP_BASE, + .end = AT91CAP9_UHP_BASE + SZ_1M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_UHP, + .end = AT91CAP9_ID_UHP, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91_usbh_device = { + .name = "at91_ohci", + .id = -1, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &usbh_data, + }, + .resource = usbh_resources, + .num_resources = ARRAY_SIZE(usbh_resources), +}; + +void __init at91_add_device_usbh(struct at91_usbh_data *data) +{ + int i; + + if (!data) + return; + + /* Enable VBus control for UHP ports */ + for (i = 0; i < data->ports; i++) { + if (data->vbus_pin[i]) + at91_set_gpio_output(data->vbus_pin[i], 0); + } + + usbh_data = *data; + platform_device_register(&at91_usbh_device); +} +#else +void __init at91_add_device_usbh(struct at91_usbh_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * Ethernet + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) +static u64 eth_dmamask = DMA_BIT_MASK(32); +static struct at91_eth_data eth_data; + +static struct resource eth_resources[] = { + [0] = { + .start = AT91CAP9_BASE_EMAC, + .end = AT91CAP9_BASE_EMAC + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_EMAC, + .end = AT91CAP9_ID_EMAC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91cap9_eth_device = { + .name = "macb", + .id = -1, + .dev = { + .dma_mask = ð_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = ð_data, + }, + .resource = eth_resources, + .num_resources = ARRAY_SIZE(eth_resources), +}; + +void __init at91_add_device_eth(struct at91_eth_data *data) +{ + if (!data) + return; + + if (data->phy_irq_pin) { + at91_set_gpio_input(data->phy_irq_pin, 0); + at91_set_deglitch(data->phy_irq_pin, 1); + } + + /* Pins used for MII and RMII */ + at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */ + at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */ + at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */ + at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */ + at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */ + at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */ + at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */ + at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */ + at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */ + at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */ + + if (!data->is_rmii) { + at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */ + at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */ + at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */ + at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */ + at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */ + at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */ + at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */ + at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */ + } + + eth_data = *data; + platform_device_register(&at91cap9_eth_device); +} +#else +void __init at91_add_device_eth(struct at91_eth_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * MMC / SD + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) +static u64 mmc_dmamask = DMA_BIT_MASK(32); +static struct at91_mmc_data mmc0_data, mmc1_data; + +static struct resource mmc0_resources[] = { + [0] = { + .start = AT91CAP9_BASE_MCI0, + .end = AT91CAP9_BASE_MCI0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_MCI0, + .end = AT91CAP9_ID_MCI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91cap9_mmc0_device = { + .name = "at91_mci", + .id = 0, + .dev = { + .dma_mask = &mmc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &mmc0_data, + }, + .resource = mmc0_resources, + .num_resources = ARRAY_SIZE(mmc0_resources), +}; + +static struct resource mmc1_resources[] = { + [0] = { + .start = AT91CAP9_BASE_MCI1, + .end = AT91CAP9_BASE_MCI1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_MCI1, + .end = AT91CAP9_ID_MCI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91cap9_mmc1_device = { + .name = "at91_mci", + .id = 1, + .dev = { + .dma_mask = &mmc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &mmc1_data, + }, + .resource = mmc1_resources, + .num_resources = ARRAY_SIZE(mmc1_resources), +}; + +void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) +{ + if (!data) + return; + + /* input/irq */ + if (data->det_pin) { + at91_set_gpio_input(data->det_pin, 1); + at91_set_deglitch(data->det_pin, 1); + } + if (data->wp_pin) + at91_set_gpio_input(data->wp_pin, 1); + if (data->vcc_pin) + at91_set_gpio_output(data->vcc_pin, 0); + + if (mmc_id == 0) { /* MCI0 */ + /* CLK */ + at91_set_A_periph(AT91_PIN_PA2, 0); + + /* CMD */ + at91_set_A_periph(AT91_PIN_PA1, 1); + + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA0, 1); + if (data->wire4) { + at91_set_A_periph(AT91_PIN_PA3, 1); + at91_set_A_periph(AT91_PIN_PA4, 1); + at91_set_A_periph(AT91_PIN_PA5, 1); + } + + mmc0_data = *data; + at91_clock_associate("mci0_clk", &at91cap9_mmc1_device.dev, "mci_clk"); + platform_device_register(&at91cap9_mmc0_device); + } else { /* MCI1 */ + /* CLK */ + at91_set_A_periph(AT91_PIN_PA16, 0); + + /* CMD */ + at91_set_A_periph(AT91_PIN_PA17, 1); + + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA18, 1); + if (data->wire4) { + at91_set_A_periph(AT91_PIN_PA19, 1); + at91_set_A_periph(AT91_PIN_PA20, 1); + at91_set_A_periph(AT91_PIN_PA21, 1); + } + + mmc1_data = *data; + at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk"); + platform_device_register(&at91cap9_mmc1_device); + } +} +#else +void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * NAND / SmartMedia + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) +static struct at91_nand_data nand_data; + +#define NAND_BASE AT91_CHIPSELECT_3 + +static struct resource nand_resources[] = { + { + .start = NAND_BASE, + .end = NAND_BASE + SZ_256M - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91cap9_nand_device = { + .name = "at91_nand", + .id = -1, + .dev = { + .platform_data = &nand_data, + }, + .resource = nand_resources, + .num_resources = ARRAY_SIZE(nand_resources), +}; + +void __init at91_add_device_nand(struct at91_nand_data *data) +{ + unsigned long csa, mode; + + if (!data) + return; + + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); + + /* set the bus interface characteristics */ + at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1) + | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1)); + + at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6) + | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6)); + + at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8)); + + if (data->bus_width_16) + mode = AT91_SMC_DBW_16; + else + mode = AT91_SMC_DBW_8; + at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1)); + + /* enable pin */ + if (data->enable_pin) + at91_set_gpio_output(data->enable_pin, 1); + + /* ready/busy pin */ + if (data->rdy_pin) + at91_set_gpio_input(data->rdy_pin, 1); + + /* card detect pin */ + if (data->det_pin) + at91_set_gpio_input(data->det_pin, 1); + + nand_data = *data; + platform_device_register(&at91cap9_nand_device); +} +#else +void __init at91_add_device_nand(struct at91_nand_data *data) {} +#endif + +/* -------------------------------------------------------------------- + * TWI (i2c) + * -------------------------------------------------------------------- */ + +/* + * Prefer the GPIO code since the TWI controller isn't robust + * (gets overruns and underruns under load) and can only issue + * repeated STARTs in one scenario (the driver doesn't yet handle them). + */ +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) + +static struct i2c_gpio_platform_data pdata = { + .sda_pin = AT91_PIN_PB4, + .sda_is_open_drain = 1, + .scl_pin = AT91_PIN_PB5, + .scl_is_open_drain = 1, + .udelay = 2, /* ~100 kHz */ +}; + +static struct platform_device at91cap9_twi_device = { + .name = "i2c-gpio", + .id = -1, + .dev.platform_data = &pdata, +}; + +void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) +{ + at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */ + at91_set_multi_drive(AT91_PIN_PB4, 1); + + at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */ + at91_set_multi_drive(AT91_PIN_PB5, 1); + + i2c_register_board_info(0, devices, nr_devices); + platform_device_register(&at91cap9_twi_device); +} + +#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) + +static struct resource twi_resources[] = { + [0] = { + .start = AT91CAP9_BASE_TWI, + .end = AT91CAP9_BASE_TWI + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_TWI, + .end = AT91CAP9_ID_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91cap9_twi_device = { + .name = "at91_i2c", + .id = -1, + .resource = twi_resources, + .num_resources = ARRAY_SIZE(twi_resources), +}; + +void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) +{ + /* pins used for TWI interface */ + at91_set_B_periph(AT91_PIN_PB4, 0); /* TWD */ + at91_set_multi_drive(AT91_PIN_PB4, 1); + + at91_set_B_periph(AT91_PIN_PB5, 0); /* TWCK */ + at91_set_multi_drive(AT91_PIN_PB5, 1); + + i2c_register_board_info(0, devices, nr_devices); + platform_device_register(&at91cap9_twi_device); +} +#else +void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} +#endif + +/* -------------------------------------------------------------------- + * SPI + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) +static u64 spi_dmamask = DMA_BIT_MASK(32); + +static struct resource spi0_resources[] = { + [0] = { + .start = AT91CAP9_BASE_SPI0, + .end = AT91CAP9_BASE_SPI0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_SPI0, + .end = AT91CAP9_ID_SPI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91cap9_spi0_device = { + .name = "atmel_spi", + .id = 0, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = spi0_resources, + .num_resources = ARRAY_SIZE(spi0_resources), +}; + +static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PD0, AT91_PIN_PD1 }; + +static struct resource spi1_resources[] = { + [0] = { + .start = AT91CAP9_BASE_SPI1, + .end = AT91CAP9_BASE_SPI1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_SPI1, + .end = AT91CAP9_ID_SPI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91cap9_spi1_device = { + .name = "atmel_spi", + .id = 1, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = spi1_resources, + .num_resources = ARRAY_SIZE(spi1_resources), +}; + +static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 }; + +void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) +{ + int i; + unsigned long cs_pin; + short enable_spi0 = 0; + short enable_spi1 = 0; + + /* Choose SPI chip-selects */ + for (i = 0; i < nr_devices; i++) { + if (devices[i].controller_data) + cs_pin = (unsigned long) devices[i].controller_data; + else if (devices[i].bus_num == 0) + cs_pin = spi0_standard_cs[devices[i].chip_select]; + else + cs_pin = spi1_standard_cs[devices[i].chip_select]; + + if (devices[i].bus_num == 0) + enable_spi0 = 1; + else + enable_spi1 = 1; + + /* enable chip-select pin */ + at91_set_gpio_output(cs_pin, 1); + + /* pass chip-select pin to driver */ + devices[i].controller_data = (void *) cs_pin; + } + + spi_register_board_info(devices, nr_devices); + + /* Configure SPI bus(es) */ + if (enable_spi0) { + at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ + at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ + at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ + + at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk"); + platform_device_register(&at91cap9_spi0_device); + } + if (enable_spi1) { + at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */ + at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */ + at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */ + + at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk"); + platform_device_register(&at91cap9_spi1_device); + } +} +#else +void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} +#endif + + +/* -------------------------------------------------------------------- + * RTT + * -------------------------------------------------------------------- */ + +static struct platform_device at91cap9_rtt_device = { + .name = "at91_rtt", + .id = -1, + .num_resources = 0, +}; + +static void __init at91_add_device_rtt(void) +{ + platform_device_register(&at91cap9_rtt_device); +} + + +/* -------------------------------------------------------------------- + * Watchdog + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +static struct platform_device at91cap9_wdt_device = { + .name = "at91_wdt", + .id = -1, + .num_resources = 0, +}; + +static void __init at91_add_device_watchdog(void) +{ + platform_device_register(&at91cap9_wdt_device); +} +#else +static void __init at91_add_device_watchdog(void) {} +#endif + + +/* -------------------------------------------------------------------- + * AC97 + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE) +static u64 ac97_dmamask = DMA_BIT_MASK(32); +static struct atmel_ac97_data ac97_data; + +static struct resource ac97_resources[] = { + [0] = { + .start = AT91CAP9_BASE_AC97C, + .end = AT91CAP9_BASE_AC97C + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_AC97C, + .end = AT91CAP9_ID_AC97C, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91cap9_ac97_device = { + .name = "ac97c", + .id = 1, + .dev = { + .dma_mask = &ac97_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &ac97_data, + }, + .resource = ac97_resources, + .num_resources = ARRAY_SIZE(ac97_resources), +}; + +void __init at91_add_device_ac97(struct atmel_ac97_data *data) +{ + if (!data) + return; + + at91_set_A_periph(AT91_PIN_PA6, 0); /* AC97FS */ + at91_set_A_periph(AT91_PIN_PA7, 0); /* AC97CK */ + at91_set_A_periph(AT91_PIN_PA8, 0); /* AC97TX */ + at91_set_A_periph(AT91_PIN_PA9, 0); /* AC97RX */ + + /* reset */ + if (data->reset_pin) + at91_set_gpio_output(data->reset_pin, 0); + + ac97_data = *data; + platform_device_register(&at91cap9_ac97_device); +} +#else +void __init at91_add_device_ac97(struct atmel_ac97_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * LCD Controller + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) +static u64 lcdc_dmamask = DMA_BIT_MASK(32); +static struct atmel_lcdfb_info lcdc_data; + +static struct resource lcdc_resources[] = { + [0] = { + .start = AT91CAP9_LCDC_BASE, + .end = AT91CAP9_LCDC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_LCDC, + .end = AT91CAP9_ID_LCDC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91_lcdc_device = { + .name = "atmel_lcdfb", + .id = 0, + .dev = { + .dma_mask = &lcdc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &lcdc_data, + }, + .resource = lcdc_resources, + .num_resources = ARRAY_SIZE(lcdc_resources), +}; + +void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) +{ + if (!data) + return; + + at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ + at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ + at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ + at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */ + at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */ + at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */ + at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */ + at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */ + at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */ + at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */ + at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */ + at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */ + at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */ + at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */ + at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */ + at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */ + at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */ + at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */ + at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */ + at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */ + at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */ + at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */ + + lcdc_data = *data; + platform_device_register(&at91_lcdc_device); +} +#else +void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} +#endif + + +/* -------------------------------------------------------------------- + * SSC -- Synchronous Serial Controller + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) +static u64 ssc0_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc0_resources[] = { + [0] = { + .start = AT91CAP9_BASE_SSC0, + .end = AT91CAP9_BASE_SSC0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_SSC0, + .end = AT91CAP9_ID_SSC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91cap9_ssc0_device = { + .name = "ssc", + .id = 0, + .dev = { + .dma_mask = &ssc0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc0_resources, + .num_resources = ARRAY_SIZE(ssc0_resources), +}; + +static inline void configure_ssc0_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PB0, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PB1, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PB2, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PB3, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PB4, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PB5, 1); +} + +static u64 ssc1_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc1_resources[] = { + [0] = { + .start = AT91CAP9_BASE_SSC1, + .end = AT91CAP9_BASE_SSC1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_SSC1, + .end = AT91CAP9_ID_SSC1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91cap9_ssc1_device = { + .name = "ssc", + .id = 1, + .dev = { + .dma_mask = &ssc1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc1_resources, + .num_resources = ARRAY_SIZE(ssc1_resources), +}; + +static inline void configure_ssc1_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PB6, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PB7, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PB8, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PB9, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PB10, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PB11, 1); +} + +/* + * SSC controllers are accessed through library code, instead of any + * kind of all-singing/all-dancing driver. For example one could be + * used by a particular I2S audio codec's driver, while another one + * on the same system might be used by a custom data capture driver. + */ +void __init at91_add_device_ssc(unsigned id, unsigned pins) +{ + struct platform_device *pdev; + + /* + * NOTE: caller is responsible for passing information matching + * "pins" to whatever will be using each particular controller. + */ + switch (id) { + case AT91CAP9_ID_SSC0: + pdev = &at91cap9_ssc0_device; + configure_ssc0_pins(pins); + at91_clock_associate("ssc0_clk", &pdev->dev, "ssc"); + break; + case AT91CAP9_ID_SSC1: + pdev = &at91cap9_ssc1_device; + configure_ssc1_pins(pins); + at91_clock_associate("ssc1_clk", &pdev->dev, "ssc"); + break; + default: + return; + } + + platform_device_register(pdev); +} + +#else +void __init at91_add_device_ssc(unsigned id, unsigned pins) {} +#endif + + +/* -------------------------------------------------------------------- + * UART + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_SERIAL_ATMEL) +static struct resource dbgu_resources[] = { + [0] = { + .start = AT91_VA_BASE_SYS + AT91_DBGU, + .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_ID_SYS, + .end = AT91_ID_SYS, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data dbgu_data = { + .use_dma_tx = 0, + .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), +}; + +static u64 dbgu_dmamask = DMA_BIT_MASK(32); + +static struct platform_device at91cap9_dbgu_device = { + .name = "atmel_usart", + .id = 0, + .dev = { + .dma_mask = &dbgu_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dbgu_data, + }, + .resource = dbgu_resources, + .num_resources = ARRAY_SIZE(dbgu_resources), +}; + +static inline void configure_dbgu_pins(void) +{ + at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ + at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ +} + +static struct resource uart0_resources[] = { + [0] = { + .start = AT91CAP9_BASE_US0, + .end = AT91CAP9_BASE_US0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_US0, + .end = AT91CAP9_ID_US0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data uart0_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static u64 uart0_dmamask = DMA_BIT_MASK(32); + +static struct platform_device at91cap9_uart0_device = { + .name = "atmel_usart", + .id = 1, + .dev = { + .dma_mask = &uart0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart0_data, + }, + .resource = uart0_resources, + .num_resources = ARRAY_SIZE(uart0_resources), +}; + +static inline void configure_usart0_pins(unsigned pins) +{ + at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */ + at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PA24, 0); /* RTS0 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PA25, 0); /* CTS0 */ +} + +static struct resource uart1_resources[] = { + [0] = { + .start = AT91CAP9_BASE_US1, + .end = AT91CAP9_BASE_US1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_US1, + .end = AT91CAP9_ID_US1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data uart1_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static u64 uart1_dmamask = DMA_BIT_MASK(32); + +static struct platform_device at91cap9_uart1_device = { + .name = "atmel_usart", + .id = 2, + .dev = { + .dma_mask = &uart1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart1_data, + }, + .resource = uart1_resources, + .num_resources = ARRAY_SIZE(uart1_resources), +}; + +static inline void configure_usart1_pins(unsigned pins) +{ + at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ + at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */ +} + +static struct resource uart2_resources[] = { + [0] = { + .start = AT91CAP9_BASE_US2, + .end = AT91CAP9_BASE_US2 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_US2, + .end = AT91CAP9_ID_US2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data uart2_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static u64 uart2_dmamask = DMA_BIT_MASK(32); + +static struct platform_device at91cap9_uart2_device = { + .name = "atmel_usart", + .id = 3, + .dev = { + .dma_mask = &uart2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart2_data, + }, + .resource = uart2_resources, + .num_resources = ARRAY_SIZE(uart2_resources), +}; + +static inline void configure_usart2_pins(unsigned pins) +{ + at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ + at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ +} + +static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +struct platform_device *atmel_default_console_device; /* the serial console device */ + +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91cap9_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91CAP9_ID_US0: + pdev = &at91cap9_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91CAP9_ID_US1: + pdev = &at91cap9_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91CAP9_ID_US2: + pdev = &at91cap9_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + +void __init at91_add_device_serial(void) +{ + int i; + + for (i = 0; i < ATMEL_MAX_UART; i++) { + if (at91_uarts[i]) + platform_device_register(at91_uarts[i]); + } +} +#else +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} +void __init at91_add_device_serial(void) {} +#endif + + +/* -------------------------------------------------------------------- */ +/* + * These devices are always present and don't need any board-specific + * setup. + */ +static int __init at91_add_standard_devices(void) +{ + at91_add_device_rtt(); + at91_add_device_watchdog(); + return 0; +} + +arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 2cad2bf864b..d688c1dbd92 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -301,28 +301,28 @@ void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { 7, /* Advanced Interrupt Controller (FIQ) */ 7, /* System Peripherals */ - 0, /* Parallel IO Controller A */ - 0, /* Parallel IO Controller B */ - 0, /* Parallel IO Controller C */ - 0, /* Parallel IO Controller D */ - 6, /* USART 0 */ - 6, /* USART 1 */ - 6, /* USART 2 */ - 6, /* USART 3 */ + 1, /* Parallel IO Controller A */ + 1, /* Parallel IO Controller B */ + 1, /* Parallel IO Controller C */ + 1, /* Parallel IO Controller D */ + 5, /* USART 0 */ + 5, /* USART 1 */ + 5, /* USART 2 */ + 5, /* USART 3 */ 0, /* Multimedia Card Interface */ - 4, /* USB Device Port */ - 0, /* Two-Wire Interface */ - 6, /* Serial Peripheral Interface */ - 5, /* Serial Synchronous Controller 0 */ - 5, /* Serial Synchronous Controller 1 */ - 5, /* Serial Synchronous Controller 2 */ + 2, /* USB Device Port */ + 6, /* Two-Wire Interface */ + 5, /* Serial Peripheral Interface */ + 4, /* Serial Synchronous Controller 0 */ + 4, /* Serial Synchronous Controller 1 */ + 4, /* Serial Synchronous Controller 2 */ 0, /* Timer Counter 0 */ 0, /* Timer Counter 1 */ 0, /* Timer Counter 2 */ 0, /* Timer Counter 3 */ 0, /* Timer Counter 4 */ 0, /* Timer Counter 5 */ - 3, /* USB Host port */ + 2, /* USB Host port */ 3, /* Ethernet MAC */ 0, /* Advanced Interrupt Controller (IRQ0) */ 0, /* Advanced Interrupt Controller (IRQ1) */ diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 9296833f91c..ef6aeb86e98 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -13,6 +13,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -29,7 +30,7 @@ * -------------------------------------------------------------------- */ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = 0xffffffffUL; +static u64 ohci_dmamask = DMA_BIT_MASK(32); static struct at91_usbh_data usbh_data; static struct resource usbh_resources[] = { @@ -50,7 +51,7 @@ static struct platform_device at91rm9200_usbh_device = { .id = -1, .dev = { .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &usbh_data, }, .resource = usbh_resources, @@ -125,7 +126,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE) -static u64 eth_dmamask = 0xffffffffUL; +static u64 eth_dmamask = DMA_BIT_MASK(32); static struct at91_eth_data eth_data; static struct resource eth_resources[] = { @@ -146,7 +147,7 @@ static struct platform_device at91rm9200_eth_device = { .id = -1, .dev = { .dma_mask = ð_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = ð_data, }, .resource = eth_resources, @@ -285,7 +286,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = 0xffffffffUL; +static u64 mmc_dmamask = DMA_BIT_MASK(32); static struct at91_mmc_data mmc_data; static struct resource mmc_resources[] = { @@ -306,7 +307,7 @@ static struct platform_device at91rm9200_mmc_device = { .id = -1, .dev = { .dma_mask = &mmc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &mmc_data, }, .resource = mmc_resources, @@ -375,7 +376,7 @@ static struct at91_nand_data nand_data; static struct resource nand_resources[] = { { .start = NAND_BASE, - .end = NAND_BASE + SZ_8M - 1, + .end = NAND_BASE + SZ_256M - 1, .flags = IORESOURCE_MEM, } }; @@ -513,7 +514,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = 0xffffffffUL; +static u64 spi_dmamask = DMA_BIT_MASK(32); static struct resource spi_resources[] = { [0] = { @@ -533,7 +534,7 @@ static struct platform_device at91rm9200_spi_device = { .id = 0, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi_resources, .num_resources = ARRAY_SIZE(spi_resources), @@ -557,8 +558,11 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) else cs_pin = spi_standard_cs[devices[i].chip_select]; - /* enable chip-select pin */ - at91_set_gpio_output(cs_pin, 1); + if (devices[i].chip_select == 0) /* for CS0 errata */ + at91_set_A_periph(cs_pin, 0); + else + at91_set_gpio_output(cs_pin, 1); + /* pass chip-select pin to driver */ devices[i].controller_data = (void *) cs_pin; @@ -613,24 +617,175 @@ static void __init at91_add_device_watchdog(void) {} /* -------------------------------------------------------------------- - * LEDs + * SSC -- Synchronous Serial Controller * -------------------------------------------------------------------- */ -#if defined(CONFIG_LEDS) -u8 at91_leds_cpu; -u8 at91_leds_timer; +#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) +static u64 ssc0_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc0_resources[] = { + [0] = { + .start = AT91RM9200_BASE_SSC0, + .end = AT91RM9200_BASE_SSC0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91RM9200_ID_SSC0, + .end = AT91RM9200_ID_SSC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91rm9200_ssc0_device = { + .name = "ssc", + .id = 0, + .dev = { + .dma_mask = &ssc0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc0_resources, + .num_resources = ARRAY_SIZE(ssc0_resources), +}; + +static inline void configure_ssc0_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PB0, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PB1, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PB2, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PB3, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PB4, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PB5, 1); +} + +static u64 ssc1_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc1_resources[] = { + [0] = { + .start = AT91RM9200_BASE_SSC1, + .end = AT91RM9200_BASE_SSC1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91RM9200_ID_SSC1, + .end = AT91RM9200_ID_SSC1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91rm9200_ssc1_device = { + .name = "ssc", + .id = 1, + .dev = { + .dma_mask = &ssc1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc1_resources, + .num_resources = ARRAY_SIZE(ssc1_resources), +}; + +static inline void configure_ssc1_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PB6, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PB7, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PB8, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PB9, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PB10, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PB11, 1); +} + +static u64 ssc2_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc2_resources[] = { + [0] = { + .start = AT91RM9200_BASE_SSC2, + .end = AT91RM9200_BASE_SSC2 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91RM9200_ID_SSC2, + .end = AT91RM9200_ID_SSC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91rm9200_ssc2_device = { + .name = "ssc", + .id = 2, + .dev = { + .dma_mask = &ssc2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc2_resources, + .num_resources = ARRAY_SIZE(ssc2_resources), +}; + +static inline void configure_ssc2_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PB12, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PB13, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PB14, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PB15, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PB16, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PB17, 1); +} -void __init at91_init_leds(u8 cpu_led, u8 timer_led) +/* + * SSC controllers are accessed through library code, instead of any + * kind of all-singing/all-dancing driver. For example one could be + * used by a particular I2S audio codec's driver, while another one + * on the same system might be used by a custom data capture driver. + */ +void __init at91_add_device_ssc(unsigned id, unsigned pins) { - /* Enable GPIO to access the LEDs */ - at91_set_gpio_output(cpu_led, 1); - at91_set_gpio_output(timer_led, 1); + struct platform_device *pdev; - at91_leds_cpu = cpu_led; - at91_leds_timer = timer_led; + /* + * NOTE: caller is responsible for passing information matching + * "pins" to whatever will be using each particular controller. + */ + switch (id) { + case AT91RM9200_ID_SSC0: + pdev = &at91rm9200_ssc0_device; + configure_ssc0_pins(pins); + at91_clock_associate("ssc0_clk", &pdev->dev, "ssc"); + break; + case AT91RM9200_ID_SSC1: + pdev = &at91rm9200_ssc1_device; + configure_ssc1_pins(pins); + at91_clock_associate("ssc1_clk", &pdev->dev, "ssc"); + break; + case AT91RM9200_ID_SSC2: + pdev = &at91rm9200_ssc2_device; + configure_ssc2_pins(pins); + at91_clock_associate("ssc2_clk", &pdev->dev, "ssc"); + break; + default: + return; + } + + platform_device_register(pdev); } + #else -void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} +void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #endif @@ -658,12 +813,15 @@ static struct atmel_uart_data dbgu_data = { .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; +static u64 dbgu_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91rm9200_dbgu_device = { .name = "atmel_usart", .id = 0, .dev = { - .platform_data = &dbgu_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &dbgu_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dbgu_data, }, .resource = dbgu_resources, .num_resources = ARRAY_SIZE(dbgu_resources), @@ -693,28 +851,35 @@ static struct atmel_uart_data uart0_data = { .use_dma_rx = 1, }; +static u64 uart0_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91rm9200_uart0_device = { .name = "atmel_usart", .id = 1, .dev = { - .platform_data = &uart0_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart0_data, }, .resource = uart0_resources, .num_resources = ARRAY_SIZE(uart0_resources), }; -static inline void configure_usart0_pins(void) +static inline void configure_usart0_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA17, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PA18, 0); /* RXD0 */ - at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */ - /* - * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21. - * We need to drive the pin manually. Default is off (RTS is active low). - */ - at91_set_gpio_output(AT91_PIN_PA21, 1); + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */ + + if (pins & ATMEL_UART_RTS) { + /* + * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21. + * We need to drive the pin manually. Default is off (RTS is active low). + */ + at91_set_gpio_output(AT91_PIN_PA21, 1); + } } static struct resource uart1_resources[] = { @@ -735,27 +900,37 @@ static struct atmel_uart_data uart1_data = { .use_dma_rx = 1, }; +static u64 uart1_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91rm9200_uart1_device = { .name = "atmel_usart", .id = 2, .dev = { - .platform_data = &uart1_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart1_data, }, .resource = uart1_resources, .num_resources = ARRAY_SIZE(uart1_resources), }; -static inline void configure_usart1_pins(void) +static inline void configure_usart1_pins(unsigned pins) { - at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */ - at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */ at91_set_A_periph(AT91_PIN_PB20, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PB21, 0); /* RXD1 */ - at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */ - at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */ - at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */ - at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */ + + if (pins & ATMEL_UART_RI) + at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */ + if (pins & ATMEL_UART_DTR) + at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */ + if (pins & ATMEL_UART_DCD) + at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */ + if (pins & ATMEL_UART_DSR) + at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */ + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */ } static struct resource uart2_resources[] = { @@ -776,21 +951,29 @@ static struct atmel_uart_data uart2_data = { .use_dma_rx = 1, }; +static u64 uart2_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91rm9200_uart2_device = { .name = "atmel_usart", .id = 3, .dev = { - .platform_data = &uart2_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart2_data, }, .resource = uart2_resources, .num_resources = ARRAY_SIZE(uart2_resources), }; -static inline void configure_usart2_pins(void) +static inline void configure_usart2_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA22, 0); /* RXD2 */ at91_set_A_periph(AT91_PIN_PA23, 1); /* TXD2 */ + + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PA30, 0); /* CTS2 */ + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PA31, 0); /* RTS2 */ } static struct resource uart3_resources[] = { @@ -811,27 +994,35 @@ static struct atmel_uart_data uart3_data = { .use_dma_rx = 1, }; +static u64 uart3_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91rm9200_uart3_device = { .name = "atmel_usart", .id = 4, .dev = { - .platform_data = &uart3_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart3_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart3_data, }, .resource = uart3_resources, .num_resources = ARRAY_SIZE(uart3_resources), }; -static inline void configure_usart3_pins(void) +static inline void configure_usart3_pins(unsigned pins) { at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */ at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */ + + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */ + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */ } -struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init at91_init_serial(struct at91_uart_config *config) +void __init __deprecated at91_init_serial(struct at91_uart_config *config) { int i; @@ -839,22 +1030,22 @@ void __init at91_init_serial(struct at91_uart_config *config) for (i = 0; i < config->nr_tty; i++) { switch (config->tty_map[i]) { case 0: - configure_usart0_pins(); + configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91rm9200_uart0_device; at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart"); break; case 1: - configure_usart1_pins(); + configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI); at91_uarts[i] = &at91rm9200_uart1_device; at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart"); break; case 2: - configure_usart2_pins(); + configure_usart2_pins(0); at91_uarts[i] = &at91rm9200_uart2_device; at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart"); break; case 3: - configure_usart3_pins(); + configure_usart3_pins(0); at91_uarts[i] = &at91rm9200_uart3_device; at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart"); break; @@ -876,6 +1067,53 @@ void __init at91_init_serial(struct at91_uart_config *config) printk(KERN_INFO "AT91: No default serial console defined.\n"); } +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91rm9200_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91RM9200_ID_US0: + pdev = &at91rm9200_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91RM9200_ID_US1: + pdev = &at91rm9200_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91RM9200_ID_US2: + pdev = &at91rm9200_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + case AT91RM9200_ID_US3: + pdev = &at91rm9200_uart3_device; + configure_usart3_pins(pins); + at91_clock_associate("usart3_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + void __init at91_add_device_serial(void) { int i; @@ -886,7 +1124,9 @@ void __init at91_add_device_serial(void) } } #else -void __init at91_init_serial(struct at91_uart_config *config) {} +void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index e47381e8aab..18d06612ce8 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -327,30 +327,30 @@ void __init at91sam9260_initialize(unsigned long main_clock) static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { 7, /* Advanced Interrupt Controller */ 7, /* System Peripherals */ - 0, /* Parallel IO Controller A */ - 0, /* Parallel IO Controller B */ - 0, /* Parallel IO Controller C */ + 1, /* Parallel IO Controller A */ + 1, /* Parallel IO Controller B */ + 1, /* Parallel IO Controller C */ 0, /* Analog-to-Digital Converter */ - 6, /* USART 0 */ - 6, /* USART 1 */ - 6, /* USART 2 */ + 5, /* USART 0 */ + 5, /* USART 1 */ + 5, /* USART 2 */ 0, /* Multimedia Card Interface */ - 4, /* USB Device Port */ - 0, /* Two-Wire Interface */ - 6, /* Serial Peripheral Interface 0 */ - 6, /* Serial Peripheral Interface 1 */ + 2, /* USB Device Port */ + 6, /* Two-Wire Interface */ + 5, /* Serial Peripheral Interface 0 */ + 5, /* Serial Peripheral Interface 1 */ 5, /* Serial Synchronous Controller */ 0, 0, 0, /* Timer Counter 0 */ 0, /* Timer Counter 1 */ 0, /* Timer Counter 2 */ - 3, /* USB Host port */ + 2, /* USB Host port */ 3, /* Ethernet */ 0, /* Image Sensor Interface */ - 6, /* USART 3 */ - 6, /* USART 4 */ - 6, /* USART 5 */ + 5, /* USART 3 */ + 5, /* USART 4 */ + 5, /* USART 5 */ 0, /* Timer Counter 3 */ 0, /* Timer Counter 4 */ 0, /* Timer Counter 5 */ diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 3091bf47d8c..105f8403860 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -12,6 +12,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -29,7 +30,7 @@ * -------------------------------------------------------------------- */ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = 0xffffffffUL; +static u64 ohci_dmamask = DMA_BIT_MASK(32); static struct at91_usbh_data usbh_data; static struct resource usbh_resources[] = { @@ -50,7 +51,7 @@ static struct platform_device at91_usbh_device = { .id = -1, .dev = { .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &usbh_data, }, .resource = usbh_resources, @@ -125,7 +126,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) -static u64 eth_dmamask = 0xffffffffUL; +static u64 eth_dmamask = DMA_BIT_MASK(32); static struct at91_eth_data eth_data; static struct resource eth_resources[] = { @@ -146,7 +147,7 @@ static struct platform_device at91sam9260_eth_device = { .id = -1, .dev = { .dma_mask = ð_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = ð_data, }, .resource = eth_resources, @@ -199,7 +200,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = 0xffffffffUL; +static u64 mmc_dmamask = DMA_BIT_MASK(32); static struct at91_mmc_data mmc_data; static struct resource mmc_resources[] = { @@ -220,7 +221,7 @@ static struct platform_device at91sam9260_mmc_device = { .id = -1, .dev = { .dma_mask = &mmc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &mmc_data, }, .resource = mmc_resources, @@ -289,7 +290,7 @@ static struct at91_nand_data nand_data; static struct resource nand_resources[] = { { .start = NAND_BASE, - .end = NAND_BASE + SZ_8M - 1, + .end = NAND_BASE + SZ_256M - 1, .flags = IORESOURCE_MEM, } }; @@ -312,7 +313,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) return; csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC); + at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); /* set the bus interface characteristics */ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) @@ -431,7 +432,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = 0xffffffffUL; +static u64 spi_dmamask = DMA_BIT_MASK(32); static struct resource spi0_resources[] = { [0] = { @@ -451,7 +452,7 @@ static struct platform_device at91sam9260_spi0_device = { .id = 0, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi0_resources, .num_resources = ARRAY_SIZE(spi0_resources), @@ -477,7 +478,7 @@ static struct platform_device at91sam9260_spi1_device = { .id = 1, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi1_resources, .num_resources = ARRAY_SIZE(spi1_resources), @@ -539,24 +540,126 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) /* -------------------------------------------------------------------- - * LEDs + * RTT * -------------------------------------------------------------------- */ -#if defined(CONFIG_LEDS) -u8 at91_leds_cpu; -u8 at91_leds_timer; +static struct resource rtt_resources[] = { + { + .start = AT91_BASE_SYS + AT91_RTT, + .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; -void __init at91_init_leds(u8 cpu_led, u8 timer_led) +static struct platform_device at91sam9260_rtt_device = { + .name = "at91_rtt", + .id = -1, + .resource = rtt_resources, + .num_resources = ARRAY_SIZE(rtt_resources), +}; + +static void __init at91_add_device_rtt(void) { - /* Enable GPIO to access the LEDs */ - at91_set_gpio_output(cpu_led, 1); - at91_set_gpio_output(timer_led, 1); + platform_device_register(&at91sam9260_rtt_device); +} + - at91_leds_cpu = cpu_led; - at91_leds_timer = timer_led; +/* -------------------------------------------------------------------- + * Watchdog + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +static struct platform_device at91sam9260_wdt_device = { + .name = "at91_wdt", + .id = -1, + .num_resources = 0, +}; + +static void __init at91_add_device_watchdog(void) +{ + platform_device_register(&at91sam9260_wdt_device); } #else -void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} +static void __init at91_add_device_watchdog(void) {} +#endif + + +/* -------------------------------------------------------------------- + * SSC -- Synchronous Serial Controller + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) +static u64 ssc_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_SSC, + .end = AT91SAM9260_BASE_SSC + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_SSC, + .end = AT91SAM9260_ID_SSC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9260_ssc_device = { + .name = "ssc", + .id = 0, + .dev = { + .dma_mask = &ssc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc_resources, + .num_resources = ARRAY_SIZE(ssc_resources), +}; + +static inline void configure_ssc_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PB17, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PB16, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PB18, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PB19, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PB20, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PB21, 1); +} + +/* + * SSC controllers are accessed through library code, instead of any + * kind of all-singing/all-dancing driver. For example one could be + * used by a particular I2S audio codec's driver, while another one + * on the same system might be used by a custom data capture driver. + */ +void __init at91_add_device_ssc(unsigned id, unsigned pins) +{ + struct platform_device *pdev; + + /* + * NOTE: caller is responsible for passing information matching + * "pins" to whatever will be using each particular controller. + */ + switch (id) { + case AT91SAM9260_ID_SSC: + pdev = &at91sam9260_ssc_device; + configure_ssc_pins(pins); + at91_clock_associate("ssc_clk", &pdev->dev, "pclk"); + break; + default: + return; + } + + platform_device_register(pdev); +} + +#else +void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #endif @@ -583,12 +686,15 @@ static struct atmel_uart_data dbgu_data = { .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; +static u64 dbgu_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9260_dbgu_device = { .name = "atmel_usart", .id = 0, .dev = { - .platform_data = &dbgu_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &dbgu_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dbgu_data, }, .resource = dbgu_resources, .num_resources = ARRAY_SIZE(dbgu_resources), @@ -618,27 +724,37 @@ static struct atmel_uart_data uart0_data = { .use_dma_rx = 1, }; +static u64 uart0_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9260_uart0_device = { .name = "atmel_usart", .id = 1, .dev = { - .platform_data = &uart0_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart0_data, }, .resource = uart0_resources, .num_resources = ARRAY_SIZE(uart0_resources), }; -static inline void configure_usart0_pins(void) +static inline void configure_usart0_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */ - at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */ - at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */ - at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */ - at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */ - at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */ - at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */ + if (pins & ATMEL_UART_DTR) + at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */ + if (pins & ATMEL_UART_DSR) + at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */ + if (pins & ATMEL_UART_DCD) + at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */ + if (pins & ATMEL_UART_RI) + at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */ } static struct resource uart1_resources[] = { @@ -659,23 +775,29 @@ static struct atmel_uart_data uart1_data = { .use_dma_rx = 1, }; +static u64 uart1_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9260_uart1_device = { .name = "atmel_usart", .id = 2, .dev = { - .platform_data = &uart1_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart1_data, }, .resource = uart1_resources, .num_resources = ARRAY_SIZE(uart1_resources), }; -static inline void configure_usart1_pins(void) +static inline void configure_usart1_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */ - at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */ - at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */ } static struct resource uart2_resources[] = { @@ -696,21 +818,29 @@ static struct atmel_uart_data uart2_data = { .use_dma_rx = 1, }; +static u64 uart2_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9260_uart2_device = { .name = "atmel_usart", .id = 3, .dev = { - .platform_data = &uart2_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart2_data, }, .resource = uart2_resources, .num_resources = ARRAY_SIZE(uart2_resources), }; -static inline void configure_usart2_pins(void) +static inline void configure_usart2_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */ at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PA4, 0); /* RTS2 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PA5, 0); /* CTS2 */ } static struct resource uart3_resources[] = { @@ -731,21 +861,29 @@ static struct atmel_uart_data uart3_data = { .use_dma_rx = 1, }; +static u64 uart3_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9260_uart3_device = { .name = "atmel_usart", .id = 4, .dev = { - .platform_data = &uart3_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart3_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart3_data, }, .resource = uart3_resources, .num_resources = ARRAY_SIZE(uart3_resources), }; -static inline void configure_usart3_pins(void) +static inline void configure_usart3_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */ at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PC8, 0); /* RTS3 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PC10, 0); /* CTS3 */ } static struct resource uart4_resources[] = { @@ -766,12 +904,15 @@ static struct atmel_uart_data uart4_data = { .use_dma_rx = 1, }; +static u64 uart4_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9260_uart4_device = { .name = "atmel_usart", .id = 5, .dev = { - .platform_data = &uart4_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart4_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart4_data, }, .resource = uart4_resources, .num_resources = ARRAY_SIZE(uart4_resources), @@ -801,12 +942,15 @@ static struct atmel_uart_data uart5_data = { .use_dma_rx = 1, }; +static u64 uart5_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9260_uart5_device = { .name = "atmel_usart", .id = 6, .dev = { - .platform_data = &uart5_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart5_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart5_data, }, .resource = uart5_resources, .num_resources = ARRAY_SIZE(uart5_resources), @@ -818,10 +962,10 @@ static inline void configure_usart5_pins(void) at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */ } -struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init at91_init_serial(struct at91_uart_config *config) +void __init __deprecated at91_init_serial(struct at91_uart_config *config) { int i; @@ -829,22 +973,22 @@ void __init at91_init_serial(struct at91_uart_config *config) for (i = 0; i < config->nr_tty; i++) { switch (config->tty_map[i]) { case 0: - configure_usart0_pins(); + configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI); at91_uarts[i] = &at91sam9260_uart0_device; at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart"); break; case 1: - configure_usart1_pins(); + configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9260_uart1_device; at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart"); break; case 2: - configure_usart2_pins(); + configure_usart2_pins(0); at91_uarts[i] = &at91sam9260_uart2_device; at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart"); break; case 3: - configure_usart3_pins(); + configure_usart3_pins(0); at91_uarts[i] = &at91sam9260_uart3_device; at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart"); break; @@ -876,6 +1020,63 @@ void __init at91_init_serial(struct at91_uart_config *config) printk(KERN_INFO "AT91: No default serial console defined.\n"); } +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91sam9260_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US0: + pdev = &at91sam9260_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US1: + pdev = &at91sam9260_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US2: + pdev = &at91sam9260_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US3: + pdev = &at91sam9260_uart3_device; + configure_usart3_pins(pins); + at91_clock_associate("usart3_clk", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US4: + pdev = &at91sam9260_uart4_device; + configure_usart4_pins(); + at91_clock_associate("usart4_clk", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US5: + pdev = &at91sam9260_uart5_device; + configure_usart5_pins(); + at91_clock_associate("usart5_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + void __init at91_add_device_serial(void) { int i; @@ -886,7 +1087,9 @@ void __init at91_add_device_serial(void) } } #else -void __init at91_init_serial(struct at91_uart_config *config) {} +void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif @@ -898,6 +1101,8 @@ void __init at91_add_device_serial(void) {} */ static int __init at91_add_standard_devices(void) { + at91_add_device_rtt(); + at91_add_device_watchdog(); return 0; } diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index dfe8c39c9fb..90b87e1877d 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -279,25 +279,25 @@ void __init at91sam9261_initialize(unsigned long main_clock) static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { 7, /* Advanced Interrupt Controller */ 7, /* System Peripherals */ - 0, /* Parallel IO Controller A */ - 0, /* Parallel IO Controller B */ - 0, /* Parallel IO Controller C */ + 1, /* Parallel IO Controller A */ + 1, /* Parallel IO Controller B */ + 1, /* Parallel IO Controller C */ 0, - 6, /* USART 0 */ - 6, /* USART 1 */ - 6, /* USART 2 */ + 5, /* USART 0 */ + 5, /* USART 1 */ + 5, /* USART 2 */ 0, /* Multimedia Card Interface */ - 4, /* USB Device Port */ - 0, /* Two-Wire Interface */ - 6, /* Serial Peripheral Interface 0 */ - 6, /* Serial Peripheral Interface 1 */ - 5, /* Serial Synchronous Controller 0 */ - 5, /* Serial Synchronous Controller 1 */ - 5, /* Serial Synchronous Controller 2 */ + 2, /* USB Device Port */ + 6, /* Two-Wire Interface */ + 5, /* Serial Peripheral Interface 0 */ + 5, /* Serial Peripheral Interface 1 */ + 4, /* Serial Synchronous Controller 0 */ + 4, /* Serial Synchronous Controller 1 */ + 4, /* Serial Synchronous Controller 2 */ 0, /* Timer Counter 0 */ 0, /* Timer Counter 1 */ 0, /* Timer Counter 2 */ - 3, /* USB Host port */ + 2, /* USB Host port */ 3, /* LCD Controller */ 0, 0, diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 64979a9023c..245641263fc 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -13,6 +13,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -33,7 +34,7 @@ * -------------------------------------------------------------------- */ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = 0xffffffffUL; +static u64 ohci_dmamask = DMA_BIT_MASK(32); static struct at91_usbh_data usbh_data; static struct resource usbh_resources[] = { @@ -54,7 +55,7 @@ static struct platform_device at91sam9261_usbh_device = { .id = -1, .dev = { .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &usbh_data, }, .resource = usbh_resources, @@ -106,8 +107,6 @@ static struct platform_device at91sam9261_udc_device = { void __init at91_add_device_udc(struct at91_udc_data *data) { - unsigned long x; - if (!data) return; @@ -116,9 +115,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) at91_set_deglitch(data->vbus_pin, 1); } - /* Pullup pin is handled internally */ - x = at91_sys_read(AT91_MATRIX_USBPUCR); - at91_sys_write(AT91_MATRIX_USBPUCR, x | AT91_MATRIX_USBPUCR_PUON); + /* Pullup pin is handled internally by USB device peripheral */ udc_data = *data; platform_device_register(&at91sam9261_udc_device); @@ -132,7 +129,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = 0xffffffffUL; +static u64 mmc_dmamask = DMA_BIT_MASK(32); static struct at91_mmc_data mmc_data; static struct resource mmc_resources[] = { @@ -153,7 +150,7 @@ static struct platform_device at91sam9261_mmc_device = { .id = -1, .dev = { .dma_mask = &mmc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &mmc_data, }, .resource = mmc_resources, @@ -232,7 +229,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) return; csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC); + at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); /* set the bus interface characteristics */ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) @@ -354,7 +351,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = 0xffffffffUL; +static u64 spi_dmamask = DMA_BIT_MASK(32); static struct resource spi0_resources[] = { [0] = { @@ -374,7 +371,7 @@ static struct platform_device at91sam9261_spi0_device = { .id = 0, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi0_resources, .num_resources = ARRAY_SIZE(spi0_resources), @@ -400,7 +397,7 @@ static struct platform_device at91sam9261_spi1_device = { .id = 1, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi1_resources, .num_resources = ARRAY_SIZE(spi1_resources), @@ -466,7 +463,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static u64 lcdc_dmamask = 0xffffffffUL; +static u64 lcdc_dmamask = DMA_BIT_MASK(32); static struct atmel_lcdfb_info lcdc_data; static struct resource lcdc_resources[] = { @@ -494,7 +491,7 @@ static struct platform_device at91_lcdc_device = { .id = 0, .dev = { .dma_mask = &lcdc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &lcdc_data, }, .resource = lcdc_resources, @@ -507,6 +504,17 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) return; } +#if defined(CONFIG_FB_ATMEL_STN) + at91_set_A_periph(AT91_PIN_PB0, 0); /* LCDVSYNC */ + at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ + at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */ + at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */ + at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */ + at91_set_A_periph(AT91_PIN_PB5, 0); /* LCDD0 */ + at91_set_A_periph(AT91_PIN_PB6, 0); /* LCDD1 */ + at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */ + at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */ +#else at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */ @@ -529,6 +537,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */ at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */ at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */ +#endif lcdc_data = *data; platform_device_register(&at91_lcdc_device); @@ -539,24 +548,220 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} /* -------------------------------------------------------------------- - * LEDs + * RTT + * -------------------------------------------------------------------- */ + +static struct resource rtt_resources[] = { + { + .start = AT91_BASE_SYS + AT91_RTT, + .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91sam9261_rtt_device = { + .name = "at91_rtt", + .id = -1, + .resource = rtt_resources, + .num_resources = ARRAY_SIZE(rtt_resources), +}; + +static void __init at91_add_device_rtt(void) +{ + platform_device_register(&at91sam9261_rtt_device); +} + + +/* -------------------------------------------------------------------- + * Watchdog + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +static struct platform_device at91sam9261_wdt_device = { + .name = "at91_wdt", + .id = -1, + .num_resources = 0, +}; + +static void __init at91_add_device_watchdog(void) +{ + platform_device_register(&at91sam9261_wdt_device); +} +#else +static void __init at91_add_device_watchdog(void) {} +#endif + + +/* -------------------------------------------------------------------- + * SSC -- Synchronous Serial Controller * -------------------------------------------------------------------- */ -#if defined(CONFIG_LEDS) -u8 at91_leds_cpu; -u8 at91_leds_timer; +#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) +static u64 ssc0_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc0_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_SSC0, + .end = AT91SAM9261_BASE_SSC0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_ID_SSC0, + .end = AT91SAM9261_ID_SSC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9261_ssc0_device = { + .name = "ssc", + .id = 0, + .dev = { + .dma_mask = &ssc0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc0_resources, + .num_resources = ARRAY_SIZE(ssc0_resources), +}; + +static inline void configure_ssc0_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PB21, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PB22, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PB23, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PB24, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PB25, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PB26, 1); +} + +static u64 ssc1_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc1_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_SSC1, + .end = AT91SAM9261_BASE_SSC1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_ID_SSC1, + .end = AT91SAM9261_ID_SSC1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9261_ssc1_device = { + .name = "ssc", + .id = 1, + .dev = { + .dma_mask = &ssc1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc1_resources, + .num_resources = ARRAY_SIZE(ssc1_resources), +}; + +static inline void configure_ssc1_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_B_periph(AT91_PIN_PA17, 1); + if (pins & ATMEL_SSC_TK) + at91_set_B_periph(AT91_PIN_PA18, 1); + if (pins & ATMEL_SSC_TD) + at91_set_B_periph(AT91_PIN_PA19, 1); + if (pins & ATMEL_SSC_RD) + at91_set_B_periph(AT91_PIN_PA20, 1); + if (pins & ATMEL_SSC_RK) + at91_set_B_periph(AT91_PIN_PA21, 1); + if (pins & ATMEL_SSC_RF) + at91_set_B_periph(AT91_PIN_PA22, 1); +} + +static u64 ssc2_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc2_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_SSC2, + .end = AT91SAM9261_BASE_SSC2 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_ID_SSC2, + .end = AT91SAM9261_ID_SSC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9261_ssc2_device = { + .name = "ssc", + .id = 2, + .dev = { + .dma_mask = &ssc2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc2_resources, + .num_resources = ARRAY_SIZE(ssc2_resources), +}; + +static inline void configure_ssc2_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_B_periph(AT91_PIN_PC25, 1); + if (pins & ATMEL_SSC_TK) + at91_set_B_periph(AT91_PIN_PC26, 1); + if (pins & ATMEL_SSC_TD) + at91_set_B_periph(AT91_PIN_PC27, 1); + if (pins & ATMEL_SSC_RD) + at91_set_B_periph(AT91_PIN_PC28, 1); + if (pins & ATMEL_SSC_RK) + at91_set_B_periph(AT91_PIN_PC29, 1); + if (pins & ATMEL_SSC_RF) + at91_set_B_periph(AT91_PIN_PC30, 1); +} -void __init at91_init_leds(u8 cpu_led, u8 timer_led) +/* + * SSC controllers are accessed through library code, instead of any + * kind of all-singing/all-dancing driver. For example one could be + * used by a particular I2S audio codec's driver, while another one + * on the same system might be used by a custom data capture driver. + */ +void __init at91_add_device_ssc(unsigned id, unsigned pins) { - /* Enable GPIO to access the LEDs */ - at91_set_gpio_output(cpu_led, 1); - at91_set_gpio_output(timer_led, 1); + struct platform_device *pdev; + + /* + * NOTE: caller is responsible for passing information matching + * "pins" to whatever will be using each particular controller. + */ + switch (id) { + case AT91SAM9261_ID_SSC0: + pdev = &at91sam9261_ssc0_device; + configure_ssc0_pins(pins); + at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); + break; + case AT91SAM9261_ID_SSC1: + pdev = &at91sam9261_ssc1_device; + configure_ssc1_pins(pins); + at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); + break; + case AT91SAM9261_ID_SSC2: + pdev = &at91sam9261_ssc2_device; + configure_ssc2_pins(pins); + at91_clock_associate("ssc2_clk", &pdev->dev, "pclk"); + break; + default: + return; + } - at91_leds_cpu = cpu_led; - at91_leds_timer = timer_led; + platform_device_register(pdev); } + #else -void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} +void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #endif @@ -584,12 +789,15 @@ static struct atmel_uart_data dbgu_data = { .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; +static u64 dbgu_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9261_dbgu_device = { .name = "atmel_usart", .id = 0, .dev = { - .platform_data = &dbgu_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &dbgu_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dbgu_data, }, .resource = dbgu_resources, .num_resources = ARRAY_SIZE(dbgu_resources), @@ -619,23 +827,29 @@ static struct atmel_uart_data uart0_data = { .use_dma_rx = 1, }; +static u64 uart0_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9261_uart0_device = { .name = "atmel_usart", .id = 1, .dev = { - .platform_data = &uart0_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart0_data, }, .resource = uart0_resources, .num_resources = ARRAY_SIZE(uart0_resources), }; -static inline void configure_usart0_pins(void) +static inline void configure_usart0_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */ - at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */ - at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */ } static struct resource uart1_resources[] = { @@ -656,21 +870,29 @@ static struct atmel_uart_data uart1_data = { .use_dma_rx = 1, }; +static u64 uart1_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9261_uart1_device = { .name = "atmel_usart", .id = 2, .dev = { - .platform_data = &uart1_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart1_data, }, .resource = uart1_resources, .num_resources = ARRAY_SIZE(uart1_resources), }; -static inline void configure_usart1_pins(void) +static inline void configure_usart1_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PA12, 0); /* RTS1 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PA13, 0); /* CTS1 */ } static struct resource uart2_resources[] = { @@ -691,27 +913,35 @@ static struct atmel_uart_data uart2_data = { .use_dma_rx = 1, }; +static u64 uart2_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9261_uart2_device = { .name = "atmel_usart", .id = 3, .dev = { - .platform_data = &uart2_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart2_data, }, .resource = uart2_resources, .num_resources = ARRAY_SIZE(uart2_resources), }; -static inline void configure_usart2_pins(void) +static inline void configure_usart2_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */ at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PA15, 0); /* RTS2*/ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PA16, 0); /* CTS2 */ } -struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init at91_init_serial(struct at91_uart_config *config) +void __init __deprecated at91_init_serial(struct at91_uart_config *config) { int i; @@ -719,17 +949,17 @@ void __init at91_init_serial(struct at91_uart_config *config) for (i = 0; i < config->nr_tty; i++) { switch (config->tty_map[i]) { case 0: - configure_usart0_pins(); + configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9261_uart0_device; at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart"); break; case 1: - configure_usart1_pins(); + configure_usart1_pins(0); at91_uarts[i] = &at91sam9261_uart1_device; at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart"); break; case 2: - configure_usart2_pins(); + configure_usart2_pins(0); at91_uarts[i] = &at91sam9261_uart2_device; at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart"); break; @@ -751,6 +981,48 @@ void __init at91_init_serial(struct at91_uart_config *config) printk(KERN_INFO "AT91: No default serial console defined.\n"); } +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91sam9261_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91SAM9261_ID_US0: + pdev = &at91sam9261_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91SAM9261_ID_US1: + pdev = &at91sam9261_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91SAM9261_ID_US2: + pdev = &at91sam9261_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + void __init at91_add_device_serial(void) { int i; @@ -761,7 +1033,9 @@ void __init at91_add_device_serial(void) } } #else -void __init at91_init_serial(struct at91_uart_config *config) {} +void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif @@ -774,6 +1048,8 @@ void __init at91_add_device_serial(void) {} */ static int __init at91_add_standard_devices(void) { + at91_add_device_rtt(); + at91_add_device_watchdog(); return 0; } diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 00e27b17785..a53ba0f7435 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -304,34 +304,34 @@ void __init at91sam9263_initialize(unsigned long main_clock) static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { 7, /* Advanced Interrupt Controller (FIQ) */ 7, /* System Peripherals */ - 0, /* Parallel IO Controller A */ - 0, /* Parallel IO Controller B */ - 0, /* Parallel IO Controller C, D and E */ + 1, /* Parallel IO Controller A */ + 1, /* Parallel IO Controller B */ + 1, /* Parallel IO Controller C, D and E */ 0, 0, - 6, /* USART 0 */ - 6, /* USART 1 */ - 6, /* USART 2 */ + 5, /* USART 0 */ + 5, /* USART 1 */ + 5, /* USART 2 */ 0, /* Multimedia Card Interface 0 */ 0, /* Multimedia Card Interface 1 */ - 4, /* CAN */ - 0, /* Two-Wire Interface */ - 6, /* Serial Peripheral Interface 0 */ - 6, /* Serial Peripheral Interface 1 */ - 5, /* Serial Synchronous Controller 0 */ - 5, /* Serial Synchronous Controller 1 */ - 6, /* AC97 Controller */ + 3, /* CAN */ + 6, /* Two-Wire Interface */ + 5, /* Serial Peripheral Interface 0 */ + 5, /* Serial Peripheral Interface 1 */ + 4, /* Serial Synchronous Controller 0 */ + 4, /* Serial Synchronous Controller 1 */ + 5, /* AC97 Controller */ 0, /* Timer Counter 0, 1 and 2 */ 0, /* Pulse Width Modulation Controller */ 3, /* Ethernet */ 0, 0, /* 2D Graphic Engine */ - 3, /* USB Device Port */ + 2, /* USB Device Port */ 0, /* Image Sensor Interface */ 3, /* LDC Controller */ 0, /* DMA Controller */ 0, - 3, /* USB Host port */ + 2, /* USB Host port */ 0, /* Advanced Interrupt Controller (IRQ0) */ 0, /* Advanced Interrupt Controller (IRQ1) */ }; diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index ac329a98e95..0b12e1adcc8 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -12,6 +12,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -32,7 +33,7 @@ * -------------------------------------------------------------------- */ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = 0xffffffffUL; +static u64 ohci_dmamask = DMA_BIT_MASK(32); static struct at91_usbh_data usbh_data; static struct resource usbh_resources[] = { @@ -53,7 +54,7 @@ static struct platform_device at91_usbh_device = { .id = -1, .dev = { .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &usbh_data, }, .resource = usbh_resources, @@ -136,7 +137,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) -static u64 eth_dmamask = 0xffffffffUL; +static u64 eth_dmamask = DMA_BIT_MASK(32); static struct at91_eth_data eth_data; static struct resource eth_resources[] = { @@ -157,7 +158,7 @@ static struct platform_device at91sam9263_eth_device = { .id = -1, .dev = { .dma_mask = ð_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = ð_data, }, .resource = eth_resources, @@ -210,7 +211,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = 0xffffffffUL; +static u64 mmc_dmamask = DMA_BIT_MASK(32); static struct at91_mmc_data mmc0_data, mmc1_data; static struct resource mmc0_resources[] = { @@ -231,7 +232,7 @@ static struct platform_device at91sam9263_mmc0_device = { .id = 0, .dev = { .dma_mask = &mmc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &mmc0_data, }, .resource = mmc0_resources, @@ -256,7 +257,7 @@ static struct platform_device at91sam9263_mmc1_device = { .id = 1, .dev = { .dma_mask = &mmc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &mmc1_data, }, .resource = mmc1_resources, @@ -382,7 +383,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) return; csa = at91_sys_read(AT91_MATRIX_EBI0CSA); - at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC); + at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); /* set the bus interface characteristics */ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) @@ -500,7 +501,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = 0xffffffffUL; +static u64 spi_dmamask = DMA_BIT_MASK(32); static struct resource spi0_resources[] = { [0] = { @@ -520,7 +521,7 @@ static struct platform_device at91sam9263_spi0_device = { .id = 0, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi0_resources, .num_resources = ARRAY_SIZE(spi0_resources), @@ -546,7 +547,7 @@ static struct platform_device at91sam9263_spi1_device = { .id = 1, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi1_resources, .num_resources = ARRAY_SIZE(spi1_resources), @@ -612,7 +613,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE) -static u64 ac97_dmamask = 0xffffffffUL; +static u64 ac97_dmamask = DMA_BIT_MASK(32); static struct atmel_ac97_data ac97_data; static struct resource ac97_resources[] = { @@ -633,7 +634,7 @@ static struct platform_device at91sam9263_ac97_device = { .id = 1, .dev = { .dma_mask = &ac97_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &ac97_data, }, .resource = ac97_resources, @@ -667,7 +668,7 @@ void __init at91_add_device_ac97(struct atmel_ac97_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static u64 lcdc_dmamask = 0xffffffffUL; +static u64 lcdc_dmamask = DMA_BIT_MASK(32); static struct atmel_lcdfb_info lcdc_data; static struct resource lcdc_resources[] = { @@ -688,7 +689,7 @@ static struct platform_device at91_lcdc_device = { .id = 0, .dev = { .dma_mask = &lcdc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &lcdc_data, }, .resource = lcdc_resources, @@ -732,24 +733,242 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} /* -------------------------------------------------------------------- - * LEDs + * Image Sensor Interface * -------------------------------------------------------------------- */ -#if defined(CONFIG_LEDS) -u8 at91_leds_cpu; -u8 at91_leds_timer; +#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE) -void __init at91_init_leds(u8 cpu_led, u8 timer_led) +struct resource isi_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_ISI, + .end = AT91SAM9263_BASE_ISI + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_ID_ISI, + .end = AT91SAM9263_ID_ISI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9263_isi_device = { + .name = "at91_isi", + .id = -1, + .resource = isi_resources, + .num_resources = ARRAY_SIZE(isi_resources), +}; + +void __init at91_add_device_isi(void) +{ + at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */ + at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */ + at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */ + at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */ + at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */ + at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */ + at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */ + at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */ + at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */ + at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */ + at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */ + at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */ + at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */ + at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */ + at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */ + at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */ +} +#else +void __init at91_add_device_isi(void) {} +#endif + + +/* -------------------------------------------------------------------- + * RTT + * -------------------------------------------------------------------- */ + +static struct resource rtt0_resources[] = { + { + .start = AT91_BASE_SYS + AT91_RTT0, + .end = AT91_BASE_SYS + AT91_RTT0 + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91sam9263_rtt0_device = { + .name = "at91_rtt", + .id = 0, + .resource = rtt0_resources, + .num_resources = ARRAY_SIZE(rtt0_resources), +}; + +static struct resource rtt1_resources[] = { + { + .start = AT91_BASE_SYS + AT91_RTT1, + .end = AT91_BASE_SYS + AT91_RTT1 + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91sam9263_rtt1_device = { + .name = "at91_rtt", + .id = 1, + .resource = rtt1_resources, + .num_resources = ARRAY_SIZE(rtt1_resources), +}; + +static void __init at91_add_device_rtt(void) +{ + platform_device_register(&at91sam9263_rtt0_device); + platform_device_register(&at91sam9263_rtt1_device); +} + + +/* -------------------------------------------------------------------- + * Watchdog + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +static struct platform_device at91sam9263_wdt_device = { + .name = "at91_wdt", + .id = -1, + .num_resources = 0, +}; + +static void __init at91_add_device_watchdog(void) +{ + platform_device_register(&at91sam9263_wdt_device); +} +#else +static void __init at91_add_device_watchdog(void) {} +#endif + + +/* -------------------------------------------------------------------- + * SSC -- Synchronous Serial Controller + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) +static u64 ssc0_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc0_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_SSC0, + .end = AT91SAM9263_BASE_SSC0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_ID_SSC0, + .end = AT91SAM9263_ID_SSC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9263_ssc0_device = { + .name = "ssc", + .id = 0, + .dev = { + .dma_mask = &ssc0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc0_resources, + .num_resources = ARRAY_SIZE(ssc0_resources), +}; + +static inline void configure_ssc0_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_B_periph(AT91_PIN_PB0, 1); + if (pins & ATMEL_SSC_TK) + at91_set_B_periph(AT91_PIN_PB1, 1); + if (pins & ATMEL_SSC_TD) + at91_set_B_periph(AT91_PIN_PB2, 1); + if (pins & ATMEL_SSC_RD) + at91_set_B_periph(AT91_PIN_PB3, 1); + if (pins & ATMEL_SSC_RK) + at91_set_B_periph(AT91_PIN_PB4, 1); + if (pins & ATMEL_SSC_RF) + at91_set_B_periph(AT91_PIN_PB5, 1); +} + +static u64 ssc1_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc1_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_SSC1, + .end = AT91SAM9263_BASE_SSC1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_ID_SSC1, + .end = AT91SAM9263_ID_SSC1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9263_ssc1_device = { + .name = "ssc", + .id = 1, + .dev = { + .dma_mask = &ssc1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc1_resources, + .num_resources = ARRAY_SIZE(ssc1_resources), +}; + +static inline void configure_ssc1_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PB6, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PB7, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PB8, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PB9, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PB10, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PB11, 1); +} + +/* + * Return the device node so that board init code can use it as the + * parent for the device node reflecting how it's used on this board. + * + * SSC controllers are accessed through library code, instead of any + * kind of all-singing/all-dancing driver. For example one could be + * used by a particular I2S audio codec's driver, while another one + * on the same system might be used by a custom data capture driver. + */ +void __init at91_add_device_ssc(unsigned id, unsigned pins) { - /* Enable GPIO to access the LEDs */ - at91_set_gpio_output(cpu_led, 1); - at91_set_gpio_output(timer_led, 1); + struct platform_device *pdev; + + /* + * NOTE: caller is responsible for passing information matching + * "pins" to whatever will be using each particular controller. + */ + switch (id) { + case AT91SAM9263_ID_SSC0: + pdev = &at91sam9263_ssc0_device; + configure_ssc0_pins(pins); + at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); + break; + case AT91SAM9263_ID_SSC1: + pdev = &at91sam9263_ssc1_device; + configure_ssc1_pins(pins); + at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); + break; + default: + return; + } - at91_leds_cpu = cpu_led; - at91_leds_timer = timer_led; + platform_device_register(pdev); } + #else -void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} +void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #endif @@ -778,12 +997,15 @@ static struct atmel_uart_data dbgu_data = { .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; +static u64 dbgu_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9263_dbgu_device = { .name = "atmel_usart", .id = 0, .dev = { - .platform_data = &dbgu_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &dbgu_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dbgu_data, }, .resource = dbgu_resources, .num_resources = ARRAY_SIZE(dbgu_resources), @@ -813,23 +1035,29 @@ static struct atmel_uart_data uart0_data = { .use_dma_rx = 1, }; +static u64 uart0_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9263_uart0_device = { .name = "atmel_usart", .id = 1, .dev = { - .platform_data = &uart0_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart0_data, }, .resource = uart0_resources, .num_resources = ARRAY_SIZE(uart0_resources), }; -static inline void configure_usart0_pins(void) +static inline void configure_usart0_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */ - at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */ - at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */ } static struct resource uart1_resources[] = { @@ -850,23 +1078,29 @@ static struct atmel_uart_data uart1_data = { .use_dma_rx = 1, }; +static u64 uart1_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9263_uart1_device = { .name = "atmel_usart", .id = 2, .dev = { - .platform_data = &uart1_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart1_data, }, .resource = uart1_resources, .num_resources = ARRAY_SIZE(uart1_resources), }; -static inline void configure_usart1_pins(void) +static inline void configure_usart1_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ - at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */ - at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */ } static struct resource uart2_resources[] = { @@ -887,29 +1121,35 @@ static struct atmel_uart_data uart2_data = { .use_dma_rx = 1, }; +static u64 uart2_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9263_uart2_device = { .name = "atmel_usart", .id = 3, .dev = { - .platform_data = &uart2_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart2_data, }, .resource = uart2_resources, .num_resources = ARRAY_SIZE(uart2_resources), }; -static inline void configure_usart2_pins(void) +static inline void configure_usart2_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ - at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */ - at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ } -struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init at91_init_serial(struct at91_uart_config *config) +void __init __deprecated at91_init_serial(struct at91_uart_config *config) { int i; @@ -917,17 +1157,17 @@ void __init at91_init_serial(struct at91_uart_config *config) for (i = 0; i < config->nr_tty; i++) { switch (config->tty_map[i]) { case 0: - configure_usart0_pins(); + configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9263_uart0_device; at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart"); break; case 1: - configure_usart1_pins(); + configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9263_uart1_device; at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart"); break; case 2: - configure_usart2_pins(); + configure_usart2_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9263_uart2_device; at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart"); break; @@ -949,6 +1189,48 @@ void __init at91_init_serial(struct at91_uart_config *config) printk(KERN_INFO "AT91: No default serial console defined.\n"); } +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91sam9263_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91SAM9263_ID_US0: + pdev = &at91sam9263_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91SAM9263_ID_US1: + pdev = &at91sam9263_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91SAM9263_ID_US2: + pdev = &at91sam9263_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + void __init at91_add_device_serial(void) { int i; @@ -960,6 +1242,8 @@ void __init at91_add_device_serial(void) } #else void __init at91_init_serial(struct at91_uart_config *config) {} +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif @@ -971,6 +1255,8 @@ void __init at91_add_device_serial(void) {} */ static int __init at91_add_standard_devices(void) { + at91_add_device_rtt(); + at91_add_device_watchdog(); return 0; } diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 2bd60a3dc62..f43b5c33e45 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -9,6 +9,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -29,7 +30,7 @@ * -------------------------------------------------------------------- */ #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = 0xffffffffUL; +static u64 mmc_dmamask = DMA_BIT_MASK(32); static struct at91_mmc_data mmc_data; static struct resource mmc_resources[] = { @@ -50,7 +51,7 @@ static struct platform_device at91sam9rl_mmc_device = { .id = -1, .dev = { .dma_mask = &mmc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &mmc_data, }, .resource = mmc_resources, @@ -247,7 +248,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = 0xffffffffUL; +static u64 spi_dmamask = DMA_BIT_MASK(32); static struct resource spi_resources[] = { [0] = { @@ -267,7 +268,7 @@ static struct platform_device at91sam9rl_spi_device = { .id = 0, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi_resources, .num_resources = ARRAY_SIZE(spi_resources), @@ -312,7 +313,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static u64 lcdc_dmamask = 0xffffffffUL; +static u64 lcdc_dmamask = DMA_BIT_MASK(32); static struct atmel_lcdfb_info lcdc_data; static struct resource lcdc_resources[] = { @@ -340,7 +341,7 @@ static struct platform_device at91_lcdc_device = { .id = 0, .dev = { .dma_mask = &lcdc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &lcdc_data, }, .resource = lcdc_resources, @@ -384,24 +385,196 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} /* -------------------------------------------------------------------- - * LEDs + * RTC * -------------------------------------------------------------------- */ -#if defined(CONFIG_LEDS) -u8 at91_leds_cpu; -u8 at91_leds_timer; +#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE) +static struct platform_device at91sam9rl_rtc_device = { + .name = "at91_rtc", + .id = -1, + .num_resources = 0, +}; -void __init at91_init_leds(u8 cpu_led, u8 timer_led) +static void __init at91_add_device_rtc(void) { - /* Enable GPIO to access the LEDs */ - at91_set_gpio_output(cpu_led, 1); - at91_set_gpio_output(timer_led, 1); + platform_device_register(&at91sam9rl_rtc_device); +} +#else +static void __init at91_add_device_rtc(void) {} +#endif + + +/* -------------------------------------------------------------------- + * RTT + * -------------------------------------------------------------------- */ + +static struct resource rtt_resources[] = { + { + .start = AT91_BASE_SYS + AT91_RTT, + .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91sam9rl_rtt_device = { + .name = "at91_rtt", + .id = -1, + .resource = rtt_resources, + .num_resources = ARRAY_SIZE(rtt_resources), +}; - at91_leds_cpu = cpu_led; - at91_leds_timer = timer_led; +static void __init at91_add_device_rtt(void) +{ + platform_device_register(&at91sam9rl_rtt_device); +} + + +/* -------------------------------------------------------------------- + * Watchdog + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +static struct platform_device at91sam9rl_wdt_device = { + .name = "at91_wdt", + .id = -1, + .num_resources = 0, +}; + +static void __init at91_add_device_watchdog(void) +{ + platform_device_register(&at91sam9rl_wdt_device); } #else -void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} +static void __init at91_add_device_watchdog(void) {} +#endif + + +/* -------------------------------------------------------------------- + * SSC -- Synchronous Serial Controller + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) +static u64 ssc0_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc0_resources[] = { + [0] = { + .start = AT91SAM9RL_BASE_SSC0, + .end = AT91SAM9RL_BASE_SSC0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9RL_ID_SSC0, + .end = AT91SAM9RL_ID_SSC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9rl_ssc0_device = { + .name = "ssc", + .id = 0, + .dev = { + .dma_mask = &ssc0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc0_resources, + .num_resources = ARRAY_SIZE(ssc0_resources), +}; + +static inline void configure_ssc0_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PC0, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PC1, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PA15, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PA16, 1); + if (pins & ATMEL_SSC_RK) + at91_set_B_periph(AT91_PIN_PA10, 1); + if (pins & ATMEL_SSC_RF) + at91_set_B_periph(AT91_PIN_PA22, 1); +} + +static u64 ssc1_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc1_resources[] = { + [0] = { + .start = AT91SAM9RL_BASE_SSC1, + .end = AT91SAM9RL_BASE_SSC1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9RL_ID_SSC1, + .end = AT91SAM9RL_ID_SSC1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9rl_ssc1_device = { + .name = "ssc", + .id = 1, + .dev = { + .dma_mask = &ssc1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc1_resources, + .num_resources = ARRAY_SIZE(ssc1_resources), +}; + +static inline void configure_ssc1_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_B_periph(AT91_PIN_PA29, 1); + if (pins & ATMEL_SSC_TK) + at91_set_B_periph(AT91_PIN_PA30, 1); + if (pins & ATMEL_SSC_TD) + at91_set_B_periph(AT91_PIN_PA13, 1); + if (pins & ATMEL_SSC_RD) + at91_set_B_periph(AT91_PIN_PA14, 1); + if (pins & ATMEL_SSC_RK) + at91_set_B_periph(AT91_PIN_PA9, 1); + if (pins & ATMEL_SSC_RF) + at91_set_B_periph(AT91_PIN_PA8, 1); +} + +/* + * Return the device node so that board init code can use it as the + * parent for the device node reflecting how it's used on this board. + * + * SSC controllers are accessed through library code, instead of any + * kind of all-singing/all-dancing driver. For example one could be + * used by a particular I2S audio codec's driver, while another one + * on the same system might be used by a custom data capture driver. + */ +void __init at91_add_device_ssc(unsigned id, unsigned pins) +{ + struct platform_device *pdev; + + /* + * NOTE: caller is responsible for passing information matching + * "pins" to whatever will be using each particular controller. + */ + switch (id) { + case AT91SAM9RL_ID_SSC0: + pdev = &at91sam9rl_ssc0_device; + configure_ssc0_pins(pins); + at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); + break; + case AT91SAM9RL_ID_SSC1: + pdev = &at91sam9rl_ssc1_device; + configure_ssc1_pins(pins); + at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); + break; + default: + return; + } + + platform_device_register(pdev); +} + +#else +void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #endif @@ -429,12 +602,15 @@ static struct atmel_uart_data dbgu_data = { .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; +static u64 dbgu_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9rl_dbgu_device = { .name = "atmel_usart", .id = 0, .dev = { - .platform_data = &dbgu_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &dbgu_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dbgu_data, }, .resource = dbgu_resources, .num_resources = ARRAY_SIZE(dbgu_resources), @@ -464,23 +640,37 @@ static struct atmel_uart_data uart0_data = { .use_dma_rx = 1, }; +static u64 uart0_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9rl_uart0_device = { .name = "atmel_usart", .id = 1, .dev = { - .platform_data = &uart0_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart0_data, }, .resource = uart0_resources, .num_resources = ARRAY_SIZE(uart0_resources), }; -static inline void configure_usart0_pins(void) +static inline void configure_usart0_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */ - at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */ - at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */ + if (pins & ATMEL_UART_DSR) + at91_set_A_periph(AT91_PIN_PD14, 0); /* DSR0 */ + if (pins & ATMEL_UART_DTR) + at91_set_A_periph(AT91_PIN_PD15, 0); /* DTR0 */ + if (pins & ATMEL_UART_DCD) + at91_set_A_periph(AT91_PIN_PD16, 0); /* DCD0 */ + if (pins & ATMEL_UART_RI) + at91_set_A_periph(AT91_PIN_PD17, 0); /* RI0 */ } static struct resource uart1_resources[] = { @@ -501,21 +691,29 @@ static struct atmel_uart_data uart1_data = { .use_dma_rx = 1, }; +static u64 uart1_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9rl_uart1_device = { .name = "atmel_usart", .id = 2, .dev = { - .platform_data = &uart1_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart1_data, }, .resource = uart1_resources, .num_resources = ARRAY_SIZE(uart1_resources), }; -static inline void configure_usart1_pins(void) +static inline void configure_usart1_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PA18, 0); /* RTS1 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PA19, 0); /* CTS1 */ } static struct resource uart2_resources[] = { @@ -536,21 +734,29 @@ static struct atmel_uart_data uart2_data = { .use_dma_rx = 1, }; +static u64 uart2_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9rl_uart2_device = { .name = "atmel_usart", .id = 3, .dev = { - .platform_data = &uart2_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart2_data, }, .resource = uart2_resources, .num_resources = ARRAY_SIZE(uart2_resources), }; -static inline void configure_usart2_pins(void) +static inline void configure_usart2_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */ at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PA29, 0); /* RTS2 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PA30, 0); /* CTS2 */ } static struct resource uart3_resources[] = { @@ -571,27 +777,35 @@ static struct atmel_uart_data uart3_data = { .use_dma_rx = 1, }; +static u64 uart3_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9rl_uart3_device = { .name = "atmel_usart", .id = 4, .dev = { - .platform_data = &uart3_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart3_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart3_data, }, .resource = uart3_resources, .num_resources = ARRAY_SIZE(uart3_resources), }; -static inline void configure_usart3_pins(void) +static inline void configure_usart3_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PB0, 1); /* TXD3 */ at91_set_A_periph(AT91_PIN_PB1, 0); /* RXD3 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PD4, 0); /* RTS3 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PD3, 0); /* CTS3 */ } -struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init at91_init_serial(struct at91_uart_config *config) +void __init __deprecated at91_init_serial(struct at91_uart_config *config) { int i; @@ -599,22 +813,22 @@ void __init at91_init_serial(struct at91_uart_config *config) for (i = 0; i < config->nr_tty; i++) { switch (config->tty_map[i]) { case 0: - configure_usart0_pins(); + configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9rl_uart0_device; at91_clock_associate("usart0_clk", &at91sam9rl_uart0_device.dev, "usart"); break; case 1: - configure_usart1_pins(); + configure_usart1_pins(0); at91_uarts[i] = &at91sam9rl_uart1_device; at91_clock_associate("usart1_clk", &at91sam9rl_uart1_device.dev, "usart"); break; case 2: - configure_usart2_pins(); + configure_usart2_pins(0); at91_uarts[i] = &at91sam9rl_uart2_device; at91_clock_associate("usart2_clk", &at91sam9rl_uart2_device.dev, "usart"); break; case 3: - configure_usart3_pins(); + configure_usart3_pins(0); at91_uarts[i] = &at91sam9rl_uart3_device; at91_clock_associate("usart3_clk", &at91sam9rl_uart3_device.dev, "usart"); break; @@ -636,6 +850,53 @@ void __init at91_init_serial(struct at91_uart_config *config) printk(KERN_INFO "AT91: No default serial console defined.\n"); } +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91sam9rl_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91SAM9RL_ID_US0: + pdev = &at91sam9rl_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91SAM9RL_ID_US1: + pdev = &at91sam9rl_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91SAM9RL_ID_US2: + pdev = &at91sam9rl_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + case AT91SAM9RL_ID_US3: + pdev = &at91sam9rl_uart3_device; + configure_usart3_pins(pins); + at91_clock_associate("usart3_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + void __init at91_add_device_serial(void) { int i; @@ -646,7 +907,9 @@ void __init at91_add_device_serial(void) } } #else -void __init at91_init_serial(struct at91_uart_config *config) {} +void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif @@ -659,6 +922,9 @@ void __init at91_add_device_serial(void) {} */ static int __init at91_add_standard_devices(void) { + at91_add_device_rtc(); + at91_add_device_rtt(); + at91_add_device_watchdog(); return 0; } diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c new file mode 100644 index 00000000000..18543713154 --- /dev/null +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -0,0 +1,359 @@ +/* + * linux/arch/arm/mach-at91/board-cap9adk.c + * + * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> + * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> + * Copyright (C) 2005 SAN People + * Copyright (C) 2007 Atmel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> +#include <linux/fb.h> +#include <linux/mtd/physmap.h> + +#include <video/atmel_lcdc.h> + +#include <asm/hardware.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91cap9_matrix.h> +#include <asm/arch/at91sam926x_mc.h> + +#include "generic.h" + + +static void __init cap9adk_map_io(void) +{ + /* Initialize processor: 12 MHz crystal */ + at91cap9_initialize(12000000); + + /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */ + at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11); + /* ... POWER LED always on */ + at91_set_gpio_output(AT91_PIN_PC29, 1); + + /* Setup the serial ports and console */ + at91_register_uart(0, 0, 0); /* DBGU = ttyS0 */ + at91_set_serial_console(0); +} + +static void __init cap9adk_init_irq(void) +{ + at91cap9_init_interrupts(NULL); +} + + +/* + * USB Host port + */ +static struct at91_usbh_data __initdata cap9adk_usbh_data = { + .ports = 2, +}; + + +/* + * ADS7846 Touchscreen + */ +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +static int ads7843_pendown_state(void) +{ + return !at91_get_gpio_value(AT91_PIN_PC4); /* Touchscreen PENIRQ */ +} + +static struct ads7846_platform_data ads_info = { + .model = 7843, + .x_min = 150, + .x_max = 3830, + .y_min = 190, + .y_max = 3830, + .vref_delay_usecs = 100, + .x_plate_ohms = 450, + .y_plate_ohms = 250, + .pressure_max = 15000, + .debounce_max = 1, + .debounce_rep = 0, + .debounce_tol = (~0), + .get_pendown_state = ads7843_pendown_state, +}; + +static void __init cap9adk_add_device_ts(void) +{ + at91_set_gpio_input(AT91_PIN_PC4, 1); /* Touchscreen PENIRQ */ + at91_set_gpio_input(AT91_PIN_PC5, 1); /* Touchscreen BUSY */ +} +#else +static void __init cap9adk_add_device_ts(void) {} +#endif + + +/* + * SPI devices. + */ +static struct spi_board_info cap9adk_spi_devices[] = { +#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) + { /* DataFlash card */ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 15 * 1000 * 1000, + .bus_num = 0, + }, +#endif +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) + { + .modalias = "ads7846", + .chip_select = 3, /* can be 2 or 3, depending on J2 jumper */ + .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ + .bus_num = 0, + .platform_data = &ads_info, + .irq = AT91_PIN_PC4, + }, +#endif +}; + + +/* + * MCI (SD/MMC) + */ +static struct at91_mmc_data __initdata cap9adk_mmc_data = { + .wire4 = 1, +// .det_pin = ... not connected +// .wp_pin = ... not connected +// .vcc_pin = ... not connected +}; + + +/* + * MACB Ethernet device + */ +static struct at91_eth_data __initdata cap9adk_macb_data = { + .is_rmii = 1, +}; + + +/* + * NAND flash + */ +static struct mtd_partition __initdata cap9adk_nand_partitions[] = { + { + .name = "NAND partition", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(cap9adk_nand_partitions); + return cap9adk_nand_partitions; +} + +static struct at91_nand_data __initdata cap9adk_nand_data = { + .ale = 21, + .cle = 22, +// .det_pin = ... not connected +// .rdy_pin = ... not connected + .enable_pin = AT91_PIN_PD15, + .partition_info = nand_partitions, +#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) + .bus_width_16 = 1, +#else + .bus_width_16 = 0, +#endif +}; + + +/* + * NOR flash + */ +static struct mtd_partition cap9adk_nor_partitions[] = { + { + .name = "NOR partition", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data cap9adk_nor_data = { + .width = 2, + .parts = cap9adk_nor_partitions, + .nr_parts = ARRAY_SIZE(cap9adk_nor_partitions), +}; + +#define NOR_BASE AT91_CHIPSELECT_0 +#define NOR_SIZE 0x800000 + +static struct resource nor_flash_resources[] = { + { + .start = NOR_BASE, + .end = NOR_BASE + NOR_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device cap9adk_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &cap9adk_nor_data, + }, + .resource = nor_flash_resources, + .num_resources = ARRAY_SIZE(nor_flash_resources), +}; + +static __init void cap9adk_add_device_nor(void) +{ + unsigned long csa; + + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); + + /* set the bus interface characteristics */ + at91_sys_write(AT91_SMC_SETUP(0), AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2) + | AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2)); + + at91_sys_write(AT91_SMC_PULSE(0), AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10) + | AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10)); + + at91_sys_write(AT91_SMC_CYCLE(0), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16)); + + at91_sys_write(AT91_SMC_MODE(0), AT91_SMC_READMODE | AT91_SMC_WRITEMODE + | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE + | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1)); + + platform_device_register(&cap9adk_nor_flash); +} + + +/* + * LCD Controller + */ +#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) +static struct fb_videomode at91_tft_vga_modes[] = { + { + .name = "TX09D50VM1CCA @ 60", + .refresh = 60, + .xres = 240, .yres = 320, + .pixclock = KHZ2PICOS(4965), + + .left_margin = 1, .right_margin = 33, + .upper_margin = 1, .lower_margin = 0, + .hsync_len = 5, .vsync_len = 1, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + }, +}; + +static struct fb_monspecs at91fb_default_monspecs = { + .manufacturer = "HIT", + .monitor = "TX09D70VM1CCA", + + .modedb = at91_tft_vga_modes, + .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), + .hfmin = 15000, + .hfmax = 64000, + .vfmin = 50, + .vfmax = 150, +}; + +#define AT91CAP9_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ + | ATMEL_LCDC_DISTYPE_TFT \ + | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) + +static void at91_lcdc_power_control(int on) +{ + if (on) + at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */ + else + at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */ +} + +/* Driver datas */ +static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data = { + .default_bpp = 16, + .default_dmacon = ATMEL_LCDC_DMAEN, + .default_lcdcon2 = AT91CAP9_DEFAULT_LCDCON2, + .default_monspecs = &at91fb_default_monspecs, + .atmel_lcdfb_power_control = at91_lcdc_power_control, + .guard_time = 1, +}; + +#else +static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data; +#endif + + +/* + * AC97 + */ +static struct atmel_ac97_data cap9adk_ac97_data = { +// .reset_pin = ... not connected +}; + + +static void __init cap9adk_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* USB Host */ + set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH); + at91_add_device_usbh(&cap9adk_usbh_data); + /* SPI */ + at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices)); + /* Touchscreen */ + cap9adk_add_device_ts(); + /* MMC */ + at91_add_device_mmc(1, &cap9adk_mmc_data); + /* Ethernet */ + at91_add_device_eth(&cap9adk_macb_data); + /* NAND */ + at91_add_device_nand(&cap9adk_nand_data); + /* NOR Flash */ + cap9adk_add_device_nor(); + /* I2C */ + at91_add_device_i2c(NULL, 0); + /* LCD Controller */ + set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH); + at91_add_device_lcdc(&cap9adk_lcdc_data); + /* AC97 */ + at91_add_device_ac97(&cap9adk_ac97_data); +} + +MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK") + /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = cap9adk_map_io, + .init_irq = cap9adk_init_irq, + .init_machine = cap9adk_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index d0aa20c9383..0e2a11fc5bb 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -25,6 +25,8 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/mtd/physmap.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> #include <asm/hardware.h> #include <asm/setup.h> @@ -156,6 +158,85 @@ static struct platform_device csb_flash = { .num_resources = ARRAY_SIZE(csb_flash_resources), }; +/* + * GPIO Buttons (on CSB300) + */ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button csb300_buttons[] = { + { + .gpio = AT91_PIN_PB29, + .code = BTN_0, + .desc = "sw0", + .active_low = 1, + .wakeup = 1, + }, + { + .gpio = AT91_PIN_PB28, + .code = BTN_1, + .desc = "sw1", + .active_low = 1, + .wakeup = 1, + }, + { + .gpio = AT91_PIN_PA21, + .code = BTN_2, + .desc = "sw2", + .active_low = 1, + .wakeup = 1, + } +}; + +static struct gpio_keys_platform_data csb300_button_data = { + .buttons = csb300_buttons, + .nbuttons = ARRAY_SIZE(csb300_buttons), +}; + +static struct platform_device csb300_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &csb300_button_data, + } +}; + +static void __init csb300_add_device_buttons(void) +{ + at91_set_gpio_input(AT91_PIN_PB29, 0); /* sw0 */ + at91_set_deglitch(AT91_PIN_PB29, 1); + at91_set_gpio_input(AT91_PIN_PB28, 0); /* sw1 */ + at91_set_deglitch(AT91_PIN_PB28, 1); + at91_set_gpio_input(AT91_PIN_PA21, 0); /* sw2 */ + at91_set_deglitch(AT91_PIN_PA21, 1); + + platform_device_register(&csb300_button_device); +} +#else +static void __init csb300_add_device_buttons(void) {} +#endif + +static struct gpio_led csb_leds[] = { + { /* "led0", yellow */ + .name = "led0", + .gpio = AT91_PIN_PB2, + .active_low = 1, + .default_trigger = "heartbeat", + }, + { /* "led1", green */ + .name = "led1", + .gpio = AT91_PIN_PB1, + .active_low = 1, + .default_trigger = "mmc0", + }, + { /* "led2", yellow */ + .name = "led2", + .gpio = AT91_PIN_PB0, + .active_low = 1, + .default_trigger = "ide-disk", + }, +}; + + static void __init csb337_board_init(void) { /* Serial */ @@ -177,6 +258,10 @@ static void __init csb337_board_init(void) at91_add_device_mmc(0, &csb337_mmc_data); /* NOR flash */ platform_device_register(&csb_flash); + /* LEDs */ + at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds)); + /* Switches on CSB300 */ + csb300_add_device_buttons(); } MACHINE_START(CSB337, "Cogent CSB337") diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c index 40c9e433170..0a897efeba8 100644 --- a/arch/arm/mach-at91/board-dk.c +++ b/arch/arm/mach-at91/board-dk.c @@ -183,6 +183,14 @@ static struct platform_device dk_flash = { .num_resources = 1, }; +static struct gpio_led dk_leds[] = { + { + .name = "led0", + .gpio = AT91_PIN_PB2, + .active_low = 1, + .default_trigger = "heartbeat", + } +}; static void __init dk_board_init(void) { @@ -213,6 +221,8 @@ static void __init dk_board_init(void) at91_add_device_nand(&dk_nand_data); /* NOR Flash */ platform_device_register(&dk_flash); + /* LEDs */ + at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds)); /* VGA */ // dk_add_device_video(); } diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c index 53a5ef9e72e..0574e50a30d 100644 --- a/arch/arm/mach-at91/board-ek.c +++ b/arch/arm/mach-at91/board-ek.c @@ -141,6 +141,25 @@ static struct platform_device ek_flash = { .num_resources = 1, }; +static struct gpio_led ek_leds[] = { + { /* "user led 1", DS2 */ + .name = "green", + .gpio = AT91_PIN_PB0, + .active_low = 1, + .default_trigger = "mmc0", + }, + { /* "user led 2", DS4 */ + .name = "yellow", + .gpio = AT91_PIN_PB1, + .active_low = 1, + .default_trigger = "heartbeat", + }, + { /* "user led 3", DS6 */ + .name = "red", + .gpio = AT91_PIN_PB2, + .active_low = 1, + } +}; static void __init ek_board_init(void) { @@ -167,6 +186,8 @@ static void __init ek_board_init(void) #endif /* NOR Flash */ platform_device_register(&ek_flash); + /* LEDs */ + at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); /* VGA */ // ek_add_device_video(); } diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 550ae59a3ac..aa29ea58ca0 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -280,6 +280,68 @@ static struct spi_board_info ek_spi_devices[] = { * LCD Controller */ #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) + +#if defined(CONFIG_FB_ATMEL_STN) + +/* STN */ +static struct fb_videomode at91_stn_modes[] = { + { + .name = "SP06Q002 @ 75", + .refresh = 75, + .xres = 320, .yres = 240, + .pixclock = KHZ2PICOS(1440), + + .left_margin = 1, .right_margin = 1, + .upper_margin = 0, .lower_margin = 0, + .hsync_len = 1, .vsync_len = 1, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + }, +}; + +static struct fb_monspecs at91fb_default_stn_monspecs = { + .manufacturer = "HIT", + .monitor = "SP06Q002", + + .modedb = at91_stn_modes, + .modedb_len = ARRAY_SIZE(at91_stn_modes), + .hfmin = 15000, + .hfmax = 64000, + .vfmin = 50, + .vfmax = 150, +}; + +#define AT91SAM9261_DEFAULT_STN_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ + | ATMEL_LCDC_DISTYPE_STNMONO \ + | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE \ + | ATMEL_LCDC_IFWIDTH_4 \ + | ATMEL_LCDC_SCANMOD_SINGLE) + +static void at91_lcdc_stn_power_control(int on) +{ + /* backlight */ + if (on) { /* power up */ + at91_set_gpio_value(AT91_PIN_PC14, 0); + at91_set_gpio_value(AT91_PIN_PC15, 0); + } else { /* power down */ + at91_set_gpio_value(AT91_PIN_PC14, 1); + at91_set_gpio_value(AT91_PIN_PC15, 1); + } +} + +static struct atmel_lcdfb_info __initdata ek_lcdc_data = { + .default_bpp = 1, + .default_dmacon = ATMEL_LCDC_DMAEN, + .default_lcdcon2 = AT91SAM9261_DEFAULT_STN_LCDCON2, + .default_monspecs = &at91fb_default_stn_monspecs, + .atmel_lcdfb_power_control = at91_lcdc_stn_power_control, + .guard_time = 1, +}; + +#else + +/* TFT */ static struct fb_videomode at91_tft_vga_modes[] = { { .name = "TX09D50VM1CCA @ 60", @@ -296,7 +358,7 @@ static struct fb_videomode at91_tft_vga_modes[] = { }, }; -static struct fb_monspecs at91fb_default_monspecs = { +static struct fb_monspecs at91fb_default_tft_monspecs = { .manufacturer = "HIT", .monitor = "TX09D50VM1CCA", @@ -308,11 +370,11 @@ static struct fb_monspecs at91fb_default_monspecs = { .vfmax = 150, }; -#define AT91SAM9261_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ +#define AT91SAM9261_DEFAULT_TFT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ | ATMEL_LCDC_DISTYPE_TFT \ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) -static void at91_lcdc_power_control(int on) +static void at91_lcdc_tft_power_control(int on) { if (on) at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */ @@ -320,15 +382,15 @@ static void at91_lcdc_power_control(int on) at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */ } -/* Driver datas */ static struct atmel_lcdfb_info __initdata ek_lcdc_data = { .default_bpp = 16, .default_dmacon = ATMEL_LCDC_DMAEN, - .default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2, - .default_monspecs = &at91fb_default_monspecs, - .atmel_lcdfb_power_control = at91_lcdc_power_control, + .default_lcdcon2 = AT91SAM9261_DEFAULT_TFT_LCDCON2, + .default_monspecs = &at91fb_default_tft_monspecs, + .atmel_lcdfb_power_control = at91_lcdc_tft_power_control, .guard_time = 1, }; +#endif #else static struct atmel_lcdfb_info __initdata ek_lcdc_data; @@ -342,25 +404,25 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data; static struct gpio_keys_button ek_buttons[] = { { .gpio = AT91_PIN_PA27, - .keycode = BTN_0, + .code = BTN_0, .desc = "Button 0", .active_low = 1, }, { .gpio = AT91_PIN_PA26, - .keycode = BTN_1, + .code = BTN_1, .desc = "Button 1", .active_low = 1, }, { .gpio = AT91_PIN_PA25, - .keycode = BTN_2, + .code = BTN_2, .desc = "Button 2", .active_low = 1, }, { .gpio = AT91_PIN_PA24, - .keycode = BTN_3, + .code = BTN_3, .desc = "Button 3", .active_low = 1, } diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index ab9dcc07545..f09347a86e7 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -27,6 +27,8 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/fb.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> #include <video/atmel_lcdc.h> @@ -163,6 +165,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = { * MACB Ethernet device */ static struct at91_eth_data __initdata ek_macb_data = { + .phy_irq_pin = AT91_PIN_PE31, .is_rmii = 1, }; @@ -264,6 +267,55 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data; /* + * GPIO Buttons + */ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button ek_buttons[] = { + { /* BP1, "leftclic" */ + .code = BTN_LEFT, + .gpio = AT91_PIN_PC5, + .active_low = 1, + .desc = "left_click", + .wakeup = 1, + }, + { /* BP2, "rightclic" */ + .code = BTN_RIGHT, + .gpio = AT91_PIN_PC4, + .active_low = 1, + .desc = "right_click", + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data ek_button_data = { + .buttons = ek_buttons, + .nbuttons = ARRAY_SIZE(ek_buttons), +}; + +static struct platform_device ek_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &ek_button_data, + } +}; + +static void __init ek_add_device_buttons(void) +{ + at91_set_GPIO_periph(AT91_PIN_PC5, 0); /* left button */ + at91_set_deglitch(AT91_PIN_PC5, 1); + at91_set_GPIO_periph(AT91_PIN_PC4, 0); /* right button */ + at91_set_deglitch(AT91_PIN_PC4, 1); + + platform_device_register(&ek_button_device); +} +#else +static void __init ek_add_device_buttons(void) {} +#endif + + +/* * AC97 */ static struct atmel_ac97_data ek_ac97_data = { @@ -271,6 +323,30 @@ static struct atmel_ac97_data ek_ac97_data = { }; +/* + * LEDs ... these could all be PWM-driven, for variable brightness + */ +static struct gpio_led ek_leds[] = { + { /* "left" led, green, userled1, pwm1 */ + .name = "ds1", + .gpio = AT91_PIN_PB8, + .active_low = 1, + .default_trigger = "mmc0", + }, + { /* "right" led, green, userled2, pwm2 */ + .name = "ds2", + .gpio = AT91_PIN_PC29, + .active_low = 1, + .default_trigger = "nand-disk", + }, + { /* "power" led, yellow, pwm0 */ + .name = "ds3", + .gpio = AT91_PIN_PB7, + .default_trigger = "heartbeat", + }, +}; + + static void __init ek_board_init(void) { /* Serial */ @@ -294,8 +370,12 @@ static void __init ek_board_init(void) at91_add_device_i2c(NULL, 0); /* LCD Controller */ at91_add_device_lcdc(&ek_lcdc_data); + /* Push Buttons */ + ek_add_device_buttons(); /* AC97 */ at91_add_device_ac97(&ek_ac97_data); + /* LEDs */ + at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); } MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 57c3b647ce8..ec76eeaafd4 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -574,6 +574,8 @@ int __init at91_clock_init(unsigned long main_clock) } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) { uhpck.pmc_mask = AT91SAM926x_PMC_UHP; udpck.pmc_mask = AT91SAM926x_PMC_UDP; + } else if (cpu_is_at91cap9()) { + uhpck.pmc_mask = AT91CAP9_PMC_UHP; } at91_sys_write(AT91_CKGR_PLLBR, 0); diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 77d4c0a3784..b5daf7f5e01 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -15,6 +15,7 @@ extern void __init at91sam9261_initialize(unsigned long main_clock); extern void __init at91sam9263_initialize(unsigned long main_clock); extern void __init at91sam9rl_initialize(unsigned long main_clock); extern void __init at91x40_initialize(unsigned long main_clock); +extern void __init at91cap9_initialize(unsigned long main_clock); /* Interrupts */ extern void __init at91rm9200_init_interrupts(unsigned int priority[]); @@ -23,6 +24,7 @@ extern void __init at91sam9261_init_interrupts(unsigned int priority[]); extern void __init at91sam9263_init_interrupts(unsigned int priority[]); extern void __init at91sam9rl_init_interrupts(unsigned int priority[]); extern void __init at91x40_init_interrupts(unsigned int priority[]); +extern void __init at91cap9_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); /* Timer */ diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index aa2d365c93f..6aeddd68d8a 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -13,6 +13,8 @@ #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> #include <linux/kernel.h> #include <linux/list.h> #include <linux/module.h> @@ -414,6 +416,66 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) /*--------------------------------------------------------------------------*/ +#ifdef CONFIG_DEBUG_FS + +static int at91_gpio_show(struct seq_file *s, void *unused) +{ + int bank, j; + + /* print heading */ + seq_printf(s, "Pin\t"); + for (bank = 0; bank < gpio_banks; bank++) { + seq_printf(s, "PIO%c\t", 'A' + bank); + }; + seq_printf(s, "\n\n"); + + /* print pin status */ + for (j = 0; j < 32; j++) { + seq_printf(s, "%i:\t", j); + + for (bank = 0; bank < gpio_banks; bank++) { + unsigned pin = PIN_BASE + (32 * bank) + j; + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (__raw_readl(pio + PIO_PSR) & mask) + seq_printf(s, "GPIO:%s", __raw_readl(pio + PIO_PDSR) & mask ? "1" : "0"); + else + seq_printf(s, "%s", __raw_readl(pio + PIO_ABSR) & mask ? "B" : "A"); + + seq_printf(s, "\t"); + } + + seq_printf(s, "\n"); + } + + return 0; +} + +static int at91_gpio_open(struct inode *inode, struct file *file) +{ + return single_open(file, at91_gpio_show, NULL); +} + +static const struct file_operations at91_gpio_operations = { + .open = at91_gpio_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init at91_gpio_debugfs_init(void) +{ + /* /sys/kernel/debug/at91_gpio */ + (void) debugfs_create_file("at91_gpio", S_IFREG | S_IRUGO, NULL, NULL, &at91_gpio_operations); + return 0; +} +postcore_initcall(at91_gpio_debugfs_init); + +#endif + +/*--------------------------------------------------------------------------*/ + /* * Called from the processor-specific init to enable GPIO interrupt support. */ diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c index 0d514497398..9cdcda500fe 100644 --- a/arch/arm/mach-at91/leds.c +++ b/arch/arm/mach-at91/leds.c @@ -14,11 +14,62 @@ #include <linux/init.h> #include <asm/mach-types.h> -#include <asm/leds.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> +/* ------------------------------------------------------------------------- */ + +#if defined(CONFIG_NEW_LEDS) + +#include <linux/platform_device.h> + +/* + * New cross-platform LED support. + */ + +static struct gpio_led_platform_data led_data; + +static struct platform_device at91_leds = { + .name = "leds-gpio", + .id = -1, + .dev.platform_data = &led_data, +}; + +void __init at91_gpio_leds(struct gpio_led *leds, int nr) +{ + int i; + + if (!nr) + return; + + for (i = 0; i < nr; i++) + at91_set_gpio_output(leds[i].gpio, leds[i].active_low); + + led_data.leds = leds; + led_data.num_leds = nr; + platform_device_register(&at91_leds); +} + +#else +void __init at91_gpio_leds(struct gpio_led *leds, int nr) {} +#endif + + +/* ------------------------------------------------------------------------- */ + +#if defined(CONFIG_LEDS) + +#include <asm/leds.h> + +/* + * Old ARM-specific LED framework; not fully functional when generic time is + * in use. + */ + +static u8 at91_leds_cpu; +static u8 at91_leds_timer; + static inline void at91_led_on(unsigned int led) { at91_set_gpio_value(led, 0); @@ -93,3 +144,18 @@ static int __init leds_init(void) } __initcall(leds_init); + + +void __init at91_init_leds(u8 cpu_led, u8 timer_led) +{ + /* Enable GPIO to access the LEDs */ + at91_set_gpio_output(cpu_led, 1); + at91_set_gpio_output(timer_led, 1); + + at91_leds_cpu = cpu_led; + at91_leds_timer = timer_led; +} + +#else +void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} +#endif diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 98cb6148291..4b120cc3613 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -80,6 +80,11 @@ static int at91_pm_verify_clocks(void) pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n"); return 0; } + } else if (cpu_is_at91cap9()) { + if ((scsr & AT91CAP9_PMC_UHP) != 0) { + pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n"); + return 0; + } } #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS diff --git a/arch/arm/mach-clps711x/time.c b/arch/arm/mach-clps711x/time.c index f428af7545b..e5dc33f1f95 100644 --- a/arch/arm/mach-clps711x/time.c +++ b/arch/arm/mach-clps711x/time.c @@ -50,9 +50,7 @@ static unsigned long clps711x_gettimeoffset(void) static irqreturn_t p720t_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); timer_tick(); - write_sequnlock(&xtime_lock); return IRQ_HANDLED; } diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c index 986205ec926..2ac63671ea5 100644 --- a/arch/arm/mach-clps7500/core.c +++ b/arch/arm/mach-clps7500/core.c @@ -298,8 +298,6 @@ extern unsigned long ioc_timer_gettimeoffset(void); static irqreturn_t clps7500_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); - timer_tick(); /* Why not using do_leds interface?? */ @@ -313,8 +311,6 @@ clps7500_timer_interrupt(int irq, void *dev_id) } } - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 8c1b5690dfe..7710e14b526 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -178,8 +178,6 @@ ebsa110_timer_interrupt(int irq, void *dev_id) { u32 count; - write_seqlock(&xtime_lock); - /* latch and read timer 1 */ __raw_writeb(0x40, PIT_CTRL); count = __raw_readb(PIT_T1); @@ -192,8 +190,6 @@ ebsa110_timer_interrupt(int irq, void *dev_id) timer_tick(); - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 70b2c780111..91f6a07a51d 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -3,6 +3,7 @@ * Core routines for Cirrus EP93xx chips. * * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> * * Thanks go to Michael Burian and Ray Lehtiniemi for their key * role in the ep93xx linux community. @@ -21,7 +22,6 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/bitops.h> -#include <linux/serial.h> #include <linux/serial_8250.h> #include <linux/serial_core.h> #include <linux/device.h> @@ -99,8 +99,6 @@ static unsigned int last_jiffy_time; static int ep93xx_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); - __raw_writel(1, EP93XX_TIMER1_CLEAR); while ((signed long) (__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time) @@ -109,8 +107,6 @@ static int ep93xx_timer_interrupt(int irq, void *dev_id) timer_tick(); } - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } @@ -157,38 +153,41 @@ static unsigned char gpio_int_enabled[3]; static unsigned char gpio_int_type1[3]; static unsigned char gpio_int_type2[3]; -static void update_gpio_int_params(int abf) +/* Port ordering is: A B F */ +static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c }; +static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 }; +static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 }; +static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x5c }; + +static void update_gpio_int_params(unsigned port) { - if (abf == 0) { - __raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE); - __raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2); - __raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1); - __raw_writeb(gpio_int_unmasked[0] & gpio_int_enabled[0], EP93XX_GPIO_A_INT_ENABLE); - } else if (abf == 1) { - __raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE); - __raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2); - __raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1); - __raw_writeb(gpio_int_unmasked[1] & gpio_int_enabled[1], EP93XX_GPIO_B_INT_ENABLE); - } else if (abf == 2) { - __raw_writeb(0, EP93XX_GPIO_F_INT_ENABLE); - __raw_writeb(gpio_int_type2[2], EP93XX_GPIO_F_INT_TYPE2); - __raw_writeb(gpio_int_type1[2], EP93XX_GPIO_F_INT_TYPE1); - __raw_writeb(gpio_int_unmasked[2] & gpio_int_enabled[2], EP93XX_GPIO_F_INT_ENABLE); - } else { - BUG(); - } -} + BUG_ON(port > 2); + __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port])); -static unsigned char data_register_offset[8] = { - 0x00, 0x04, 0x08, 0x0c, 0x20, 0x30, 0x38, 0x40, + __raw_writeb(gpio_int_type2[port], + EP93XX_GPIO_REG(int_type2_register_offset[port])); + + __raw_writeb(gpio_int_type1[port], + EP93XX_GPIO_REG(int_type1_register_offset[port])); + + __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port], + EP93XX_GPIO_REG(int_en_register_offset[port])); +} + +/* Port ordering is: A B F D E C G H */ +static const u8 data_register_offset[8] = { + 0x00, 0x04, 0x30, 0x0c, 0x20, 0x08, 0x38, 0x40, }; -static unsigned char data_direction_register_offset[8] = { - 0x10, 0x14, 0x18, 0x1c, 0x24, 0x34, 0x3c, 0x44, +static const u8 data_direction_register_offset[8] = { + 0x10, 0x14, 0x34, 0x1c, 0x24, 0x18, 0x3c, 0x44, }; -void gpio_line_config(int line, int direction) +#define GPIO_IN 0 +#define GPIO_OUT 1 + +static void ep93xx_gpio_set_direction(unsigned line, int direction) { unsigned int data_direction_register; unsigned long flags; @@ -199,14 +198,10 @@ void gpio_line_config(int line, int direction) local_irq_save(flags); if (direction == GPIO_OUT) { - if (line >= 0 && line < 16) { - /* Port A/B. */ + if (line >= 0 && line <= EP93XX_GPIO_LINE_MAX_IRQ) { + /* Port A/B/F */ gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); update_gpio_int_params(line >> 3); - } else if (line >= 40 && line < 48) { - /* Port F. */ - gpio_int_unmasked[2] &= ~(1 << (line & 7)); - update_gpio_int_params(2); } v = __raw_readb(data_direction_register); @@ -219,39 +214,58 @@ void gpio_line_config(int line, int direction) } local_irq_restore(flags); } -EXPORT_SYMBOL(gpio_line_config); -int gpio_line_get(int line) +int gpio_direction_input(unsigned gpio) +{ + if (gpio > EP93XX_GPIO_LINE_MAX) + return -EINVAL; + + ep93xx_gpio_set_direction(gpio, GPIO_IN); + + return 0; +} +EXPORT_SYMBOL(gpio_direction_input); + +int gpio_direction_output(unsigned gpio, int value) +{ + if (gpio > EP93XX_GPIO_LINE_MAX) + return -EINVAL; + + gpio_set_value(gpio, value); + ep93xx_gpio_set_direction(gpio, GPIO_OUT); + + return 0; +} +EXPORT_SYMBOL(gpio_direction_output); + +int gpio_get_value(unsigned gpio) { unsigned int data_register; - data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]); + data_register = EP93XX_GPIO_REG(data_register_offset[gpio >> 3]); - return !!(__raw_readb(data_register) & (1 << (line & 7))); + return !!(__raw_readb(data_register) & (1 << (gpio & 7))); } -EXPORT_SYMBOL(gpio_line_get); +EXPORT_SYMBOL(gpio_get_value); -void gpio_line_set(int line, int value) +void gpio_set_value(unsigned gpio, int value) { unsigned int data_register; unsigned long flags; unsigned char v; - data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]); + data_register = EP93XX_GPIO_REG(data_register_offset[gpio >> 3]); local_irq_save(flags); - if (value == EP93XX_GPIO_HIGH) { - v = __raw_readb(data_register); - v |= 1 << (line & 7); - __raw_writeb(v, data_register); - } else if (value == EP93XX_GPIO_LOW) { - v = __raw_readb(data_register); - v &= ~(1 << (line & 7)); - __raw_writeb(v, data_register); - } + v = __raw_readb(data_register); + if (value) + v |= 1 << (gpio & 7); + else + v &= ~(1 << (gpio & 7)); + __raw_writeb(v, data_register); local_irq_restore(flags); } -EXPORT_SYMBOL(gpio_line_set); +EXPORT_SYMBOL(gpio_set_value); /************************************************************************* @@ -265,47 +279,67 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) status = __raw_readb(EP93XX_GPIO_A_INT_STATUS); for (i = 0; i < 8; i++) { if (status & (1 << i)) { - desc = irq_desc + IRQ_EP93XX_GPIO(0) + i; - desc_handle_irq(IRQ_EP93XX_GPIO(0) + i, desc); + int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i; + desc = irq_desc + gpio_irq; + desc_handle_irq(gpio_irq, desc); } } status = __raw_readb(EP93XX_GPIO_B_INT_STATUS); for (i = 0; i < 8; i++) { if (status & (1 << i)) { - desc = irq_desc + IRQ_EP93XX_GPIO(8) + i; - desc_handle_irq(IRQ_EP93XX_GPIO(8) + i, desc); + int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i; + desc = irq_desc + gpio_irq; + desc_handle_irq(gpio_irq, desc); } } } static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc) { - int gpio_irq = IRQ_EP93XX_GPIO(16) + (((irq + 1) & 7) ^ 4); + /* + * map discontiguous hw irq range to continous sw irq range: + * + * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7}) + */ + int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */ + int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx; desc_handle_irq(gpio_irq, irq_desc + gpio_irq); } +static void ep93xx_gpio_irq_ack(unsigned int irq) +{ + int line = irq_to_gpio(irq); + int port = line >> 3; + int port_mask = 1 << (line & 7); + + if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) { + gpio_int_type2[port] ^= port_mask; /* switch edge direction */ + update_gpio_int_params(port); + } + + __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); +} + static void ep93xx_gpio_irq_mask_ack(unsigned int irq) { - int line = irq - IRQ_EP93XX_GPIO(0); + int line = irq_to_gpio(irq); int port = line >> 3; + int port_mask = 1 << (line & 7); - gpio_int_unmasked[port] &= ~(1 << (line & 7)); + if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) + gpio_int_type2[port] ^= port_mask; /* switch edge direction */ + + gpio_int_unmasked[port] &= ~port_mask; update_gpio_int_params(port); - if (port == 0) { - __raw_writel(1 << (line & 7), EP93XX_GPIO_A_INT_ACK); - } else if (port == 1) { - __raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK); - } else if (port == 2) { - __raw_writel(1 << (line & 7), EP93XX_GPIO_F_INT_ACK); - } + __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); } static void ep93xx_gpio_irq_mask(unsigned int irq) { - int line = irq - IRQ_EP93XX_GPIO(0); + int line = irq_to_gpio(irq); int port = line >> 3; gpio_int_unmasked[port] &= ~(1 << (line & 7)); @@ -314,7 +348,7 @@ static void ep93xx_gpio_irq_mask(unsigned int irq) static void ep93xx_gpio_irq_unmask(unsigned int irq) { - int line = irq - IRQ_EP93XX_GPIO(0); + int line = irq_to_gpio(irq); int port = line >> 3; gpio_int_unmasked[port] |= 1 << (line & 7); @@ -329,38 +363,54 @@ static void ep93xx_gpio_irq_unmask(unsigned int irq) */ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) { - int port; - int line; - - line = irq - IRQ_EP93XX_GPIO(0); - if (line >= 0 && line < 16) { - gpio_line_config(line, GPIO_IN); - } else { - gpio_line_config(EP93XX_GPIO_LINE_F(line-16), GPIO_IN); + struct irq_desc *desc = irq_desc + irq; + const int gpio = irq_to_gpio(irq); + const int port = gpio >> 3; + const int port_mask = 1 << (gpio & 7); + + ep93xx_gpio_set_direction(gpio, GPIO_IN); + + switch (type) { + case IRQT_RISING: + gpio_int_type1[port] |= port_mask; + gpio_int_type2[port] |= port_mask; + desc->handle_irq = handle_edge_irq; + break; + case IRQT_FALLING: + gpio_int_type1[port] |= port_mask; + gpio_int_type2[port] &= ~port_mask; + desc->handle_irq = handle_edge_irq; + break; + case IRQT_HIGH: + gpio_int_type1[port] &= ~port_mask; + gpio_int_type2[port] |= port_mask; + desc->handle_irq = handle_level_irq; + break; + case IRQT_LOW: + gpio_int_type1[port] &= ~port_mask; + gpio_int_type2[port] &= ~port_mask; + desc->handle_irq = handle_level_irq; + break; + case IRQT_BOTHEDGE: + gpio_int_type1[port] |= port_mask; + /* set initial polarity based on current input level */ + if (gpio_get_value(gpio)) + gpio_int_type2[port] &= ~port_mask; /* falling */ + else + gpio_int_type2[port] |= port_mask; /* rising */ + desc->handle_irq = handle_edge_irq; + break; + default: + pr_err("ep93xx: failed to set irq type %d for gpio %d\n", + type, gpio); + return -EINVAL; } - port = line >> 3; - line &= 7; - - if (type & IRQT_RISING) { - gpio_int_enabled[port] |= 1 << line; - gpio_int_type1[port] |= 1 << line; - gpio_int_type2[port] |= 1 << line; - } else if (type & IRQT_FALLING) { - gpio_int_enabled[port] |= 1 << line; - gpio_int_type1[port] |= 1 << line; - gpio_int_type2[port] &= ~(1 << line); - } else if (type & IRQT_HIGH) { - gpio_int_enabled[port] |= 1 << line; - gpio_int_type1[port] &= ~(1 << line); - gpio_int_type2[port] |= 1 << line; - } else if (type & IRQT_LOW) { - gpio_int_enabled[port] |= 1 << line; - gpio_int_type1[port] &= ~(1 << line); - gpio_int_type2[port] &= ~(1 << line); - } else { - gpio_int_enabled[port] &= ~(1 << line); - } + gpio_int_enabled[port] |= port_mask; + + desc->status &= ~IRQ_TYPE_SENSE_MASK; + desc->status |= type & IRQ_TYPE_SENSE_MASK; + update_gpio_int_params(port); return 0; @@ -368,7 +418,8 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) static struct irq_chip ep93xx_gpio_irq_chip = { .name = "GPIO", - .ack = ep93xx_gpio_irq_mask_ack, + .ack = ep93xx_gpio_irq_ack, + .mask_ack = ep93xx_gpio_irq_mask_ack, .mask = ep93xx_gpio_irq_mask, .unmask = ep93xx_gpio_irq_unmask, .set_type = ep93xx_gpio_irq_type, @@ -377,15 +428,16 @@ static struct irq_chip ep93xx_gpio_irq_chip = { void __init ep93xx_init_irq(void) { - int irq; + int gpio_irq; vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK); vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK); - for (irq = IRQ_EP93XX_GPIO(0); irq <= IRQ_EP93XX_GPIO(23); irq++) { - set_irq_chip(irq, &ep93xx_gpio_irq_chip); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); + for (gpio_irq = gpio_to_irq(0); + gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) { + set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip); + set_irq_handler(gpio_irq, handle_level_irq); + set_irq_flags(gpio_irq, IRQF_VALID); } set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler); diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c index 3a63941d43b..b2a21189dd8 100644 --- a/arch/arm/mach-footbridge/dc21285-timer.c +++ b/arch/arm/mach-footbridge/dc21285-timer.c @@ -30,14 +30,10 @@ static unsigned long timer1_gettimeoffset (void) static irqreturn_t timer1_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); - *CSR_TIMER1_CLR = 0; timer_tick(); - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c index d08d64139d0..a764e01d357 100644 --- a/arch/arm/mach-footbridge/isa-timer.c +++ b/arch/arm/mach-footbridge/isa-timer.c @@ -64,9 +64,7 @@ static unsigned long isa_gettimeoffset(void) static irqreturn_t isa_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); timer_tick(); - write_sequnlock(&xtime_lock); return IRQ_HANDLED; } diff --git a/arch/arm/mach-h720x/cpu-h7201.c b/arch/arm/mach-h720x/cpu-h7201.c index 9107b8e2ad6..c2a431f482f 100644 --- a/arch/arm/mach-h720x/cpu-h7201.c +++ b/arch/arm/mach-h720x/cpu-h7201.c @@ -29,13 +29,9 @@ static irqreturn_t h7201_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); - CPU_REG (TIMER_VIRT, TIMER_TOPSTAT); timer_tick(); - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c index 0a1a25fb8ba..c627fa124eb 100644 --- a/arch/arm/mach-h720x/cpu-h7202.c +++ b/arch/arm/mach-h720x/cpu-h7202.c @@ -113,9 +113,7 @@ h7202_timerx_demux_handler(unsigned int irq_unused, struct irq_desc *desc) mask = CPU_REG (TIMER_VIRT, TIMER_TOPSTAT); if ( mask & TSTAT_T0INT ) { - write_seqlock(&xtime_lock); timer_tick(); - write_sequnlock(&xtime_lock); if( mask == TSTAT_T0INT ) return; } diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index e9c82deb791..7fbbc17f8e8 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -250,8 +250,6 @@ unsigned long integrator_gettimeoffset(void) static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); - /* * clear the interrupt */ @@ -259,8 +257,6 @@ integrator_timer_interrupt(int irq, void *dev_id) timer_tick(); - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index d4d8134ce56..d55fa4e9bb4 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -440,7 +440,7 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) return 1; } -static irqreturn_t v3_irq(int irq, void *devid) +static irqreturn_t v3_irq(int dummy, void *devid) { #ifdef CONFIG_DEBUG_LL struct pt_regs *regs = get_irq_regs(); @@ -448,8 +448,10 @@ static irqreturn_t v3_irq(int irq, void *devid) unsigned long instr = *(unsigned long *)pc; char buf[128]; - sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x ISTAT=%02x\n", irq, - pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255, + sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x " + "ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr, + __raw_readl(SC_LBFADDR), + __raw_readl(SC_LBFCODE) & 255, v3_readb(V3_LB_ISTAT)); printascii(buf); #endif diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c index 2b086ab2668..74c65ce221d 100644 --- a/arch/arm/mach-iop32x/glantank.c +++ b/arch/arm/mach-iop32x/glantank.c @@ -3,7 +3,7 @@ * * Board support code for the GLAN Tank. * - * Copyright (C) 2006 Martin Michlmayr <tbm@cyrius.com> + * Copyright (C) 2006, 2007 Martin Michlmayr <tbm@cyrius.com> * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> * * This program is free software; you can redistribute it and/or modify it @@ -21,6 +21,7 @@ #include <linux/serial_core.h> #include <linux/serial_8250.h> #include <linux/mtd/physmap.h> +#include <linux/i2c.h> #include <linux/platform_device.h> #include <asm/hardware.h> #include <asm/io.h> @@ -118,7 +119,7 @@ subsys_initcall(glantank_pci_init); * GLAN Tank machine initialization. */ static struct physmap_flash_data glantank_flash_data = { - .width = 1, + .width = 2, }; static struct resource glantank_flash_resource = { @@ -166,6 +167,13 @@ static struct platform_device glantank_serial_device = { .resource = &glantank_uart_resource, }; +static struct i2c_board_info __initdata glantank_i2c_devices[] = { + { + I2C_BOARD_INFO("rtc-rs5c372", 0x32), + .type = "rs5c372a", + }, +}; + static void glantank_power_off(void) { __raw_writeb(0x01, 0xfe8d0004); @@ -183,6 +191,9 @@ static void __init glantank_init_machine(void) platform_device_register(&iop3xx_dma_0_channel); platform_device_register(&iop3xx_dma_1_channel); + i2c_register_board_info(0, glantank_i2c_devices, + ARRAY_SIZE(glantank_i2c_devices)); + pm_power_off = glantank_power_off; } diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index cb6ad211887..81cdc826720 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -206,8 +206,6 @@ unsigned long ixp2000_gettimeoffset (void) static int ixp2000_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); - /* clear timer 1 */ ixp2000_reg_wrb(IXP2000_T1_CLR, 1); @@ -217,8 +215,6 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id) next_jiffy_time -= ticks_per_jiffy; } - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c index 16356ffc86a..5fea5a13293 100644 --- a/arch/arm/mach-ixp23xx/core.c +++ b/arch/arm/mach-ixp23xx/core.c @@ -22,7 +22,6 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/bitops.h> -#include <linux/serial.h> #include <linux/serial_8250.h> #include <linux/serial_core.h> #include <linux/device.h> diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c index 7a85ced5671..d3a779a7a35 100644 --- a/arch/arm/mach-ixp23xx/espresso.c +++ b/arch/arm/mach-ixp23xx/espresso.c @@ -19,7 +19,6 @@ #include <linux/tty.h> #include <linux/bitops.h> #include <linux/ioport.h> -#include <linux/serial.h> #include <linux/serial_8250.h> #include <linux/serial_core.h> #include <linux/device.h> @@ -40,7 +39,6 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/mach/arch.h> -#include <asm/mach/irq.h> #include <asm/mach/pci.h> static int __init espresso_pci_init(void) diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c index c41a6b5a0ac..5c5d4d66dee 100644 --- a/arch/arm/mach-ixp23xx/ixdp2351.c +++ b/arch/arm/mach-ixp23xx/ixdp2351.c @@ -24,7 +24,6 @@ #include <linux/tty.h> #include <linux/bitops.h> #include <linux/ioport.h> -#include <linux/serial.h> #include <linux/serial_8250.h> #include <linux/serial_core.h> #include <linux/device.h> @@ -44,7 +43,6 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/mach/arch.h> -#include <asm/mach/irq.h> #include <asm/mach/pci.h> /* diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c index e35644961aa..f0f70ba1e46 100644 --- a/arch/arm/mach-ixp23xx/roadrunner.c +++ b/arch/arm/mach-ixp23xx/roadrunner.c @@ -23,7 +23,6 @@ #include <linux/tty.h> #include <linux/bitops.h> #include <linux/ioport.h> -#include <linux/serial.h> #include <linux/serial_8250.h> #include <linux/serial_core.h> #include <linux/device.h> @@ -44,7 +43,6 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/mach/arch.h> -#include <asm/mach/irq.h> #include <asm/mach/pci.h> /* diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c index d59b8dc7dc7..e38f45fa58a 100644 --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c @@ -18,6 +18,7 @@ #include <linux/tty.h> #include <linux/serial_8250.h> #include <linux/slab.h> +#include <linux/i2c-gpio.h> #include <asm/types.h> #include <asm/setup.h> @@ -47,18 +48,17 @@ static struct platform_device avila_flash = { .resource = &avila_flash_resource, }; -static struct ixp4xx_i2c_pins avila_i2c_gpio_pins = { +static struct i2c_gpio_platform_data avila_i2c_gpio_data = { .sda_pin = AVILA_SDA_PIN, .scl_pin = AVILA_SCL_PIN, }; -static struct platform_device avila_i2c_controller = { - .name = "IXP4XX-I2C", +static struct platform_device avila_i2c_gpio = { + .name = "i2c-gpio", .id = 0, - .dev = { - .platform_data = &avila_i2c_gpio_pins, + .dev = { + .platform_data = &avila_i2c_gpio_data, }, - .num_resources = 0 }; static struct resource avila_uart_resources[] = { @@ -133,7 +133,7 @@ static struct platform_device avila_pata = { }; static struct platform_device *avila_devices[] __initdata = { - &avila_i2c_controller, + &avila_i2c_gpio, &avila_flash, &avila_uart }; diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 1e75e105c4f..c473d408aa7 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/serial.h> #include <linux/serial_8250.h> +#include <linux/i2c-gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -37,15 +38,17 @@ static struct platform_device dsmg600_flash = { .resource = &dsmg600_flash_resource, }; -static struct ixp4xx_i2c_pins dsmg600_i2c_gpio_pins = { +static struct i2c_gpio_platform_data dsmg600_i2c_gpio_data = { .sda_pin = DSMG600_SDA_PIN, .scl_pin = DSMG600_SCL_PIN, }; -static struct platform_device dsmg600_i2c_controller = { - .name = "IXP4XX-I2C", +static struct platform_device dsmg600_i2c_gpio = { + .name = "i2c-gpio", .id = 0, - .dev.platform_data = &dsmg600_i2c_gpio_pins, + .dev = { + .platform_data = &dsmg600_i2c_gpio_data, + }, }; #ifdef CONFIG_LEDS_CLASS @@ -116,7 +119,7 @@ static struct platform_device dsmg600_uart = { }; static struct platform_device *dsmg600_devices[] __initdata = { - &dsmg600_i2c_controller, + &dsmg600_i2c_gpio, &dsmg600_flash, }; diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index d5008d8fc9a..e89070da28b 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -15,6 +15,7 @@ #include <linux/tty.h> #include <linux/serial_8250.h> #include <linux/slab.h> +#include <linux/i2c-gpio.h> #include <linux/io.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -120,18 +121,17 @@ static struct platform_device ixdp425_flash_nand = { }; #endif /* CONFIG_MTD_NAND_PLATFORM */ -static struct ixp4xx_i2c_pins ixdp425_i2c_gpio_pins = { +static struct i2c_gpio_platform_data ixdp425_i2c_gpio_data = { .sda_pin = IXDP425_SDA_PIN, .scl_pin = IXDP425_SCL_PIN, }; -static struct platform_device ixdp425_i2c_controller = { - .name = "IXP4XX-I2C", +static struct platform_device ixdp425_i2c_gpio = { + .name = "i2c-gpio", .id = 0, - .dev = { - .platform_data = &ixdp425_i2c_gpio_pins, + .dev = { + .platform_data = &ixdp425_i2c_gpio_data, }, - .num_resources = 0 }; static struct resource ixdp425_uart_resources[] = { @@ -178,7 +178,7 @@ static struct platform_device ixdp425_uart = { }; static struct platform_device *ixdp425_devices[] __initdata = { - &ixdp425_i2c_controller, + &ixdp425_i2c_gpio, &ixdp425_flash, #if defined(CONFIG_MTD_NAND_PLATFORM) || \ defined(CONFIG_MTD_NAND_PLATFORM_MODULE) diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 78a17413cec..54d884fb251 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -16,6 +16,7 @@ #include <linux/serial.h> #include <linux/serial_8250.h> #include <linux/leds.h> +#include <linux/i2c-gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -68,16 +69,17 @@ static struct platform_device nas100d_leds = { }; #endif -static struct ixp4xx_i2c_pins nas100d_i2c_gpio_pins = { +static struct i2c_gpio_platform_data nas100d_i2c_gpio_data = { .sda_pin = NAS100D_SDA_PIN, .scl_pin = NAS100D_SCL_PIN, }; -static struct platform_device nas100d_i2c_controller = { - .name = "IXP4XX-I2C", +static struct platform_device nas100d_i2c_gpio = { + .name = "i2c-gpio", .id = 0, - .dev.platform_data = &nas100d_i2c_gpio_pins, - .num_resources = 0, + .dev = { + .platform_data = &nas100d_i2c_gpio_data, + }, }; static struct resource nas100d_uart_resources[] = { @@ -124,7 +126,7 @@ static struct platform_device nas100d_uart = { }; static struct platform_device *nas100d_devices[] __initdata = { - &nas100d_i2c_controller, + &nas100d_i2c_gpio, &nas100d_flash, #ifdef CONFIG_LEDS_IXP4XX &nas100d_leds, diff --git a/arch/arm/mach-ixp4xx/nslu2-power.c b/arch/arm/mach-ixp4xx/nslu2-power.c index acd71e9c38a..6f10dc20832 100644 --- a/arch/arm/mach-ixp4xx/nslu2-power.c +++ b/arch/arm/mach-ixp4xx/nslu2-power.c @@ -21,7 +21,6 @@ #include <linux/reboot.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <linux/reboot.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index 9bf8ccbcacc..77277d27fcc 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -18,6 +18,7 @@ #include <linux/serial.h> #include <linux/serial_8250.h> #include <linux/leds.h> +#include <linux/i2c-gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -41,7 +42,7 @@ static struct platform_device nslu2_flash = { .resource = &nslu2_flash_resource, }; -static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = { +static struct i2c_gpio_platform_data nslu2_i2c_gpio_data = { .sda_pin = NSLU2_SDA_PIN, .scl_pin = NSLU2_SCL_PIN, }; @@ -82,11 +83,12 @@ static struct platform_device nslu2_leds = { }; #endif -static struct platform_device nslu2_i2c_controller = { - .name = "IXP4XX-I2C", +static struct platform_device nslu2_i2c_gpio = { + .name = "i2c-gpio", .id = 0, - .dev.platform_data = &nslu2_i2c_gpio_pins, - .num_resources = 0, + .dev = { + .platform_data = &nslu2_i2c_gpio_data, + }, }; static struct platform_device nslu2_beeper = { @@ -139,7 +141,7 @@ static struct platform_device nslu2_uart = { }; static struct platform_device *nslu2_devices[] __initdata = { - &nslu2_i2c_controller, + &nslu2_i2c_gpio, &nslu2_flash, &nslu2_beeper, #ifdef CONFIG_LEDS_IXP4XX diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c index d2c86e4a72e..02f766b3121 100644 --- a/arch/arm/mach-ks8695/time.c +++ b/arch/arm/mach-ks8695/time.c @@ -70,10 +70,7 @@ static unsigned long ks8695_gettimeoffset (void) */ static irqreturn_t ks8695_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); timer_tick(); - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-lh7a40x/time.c b/arch/arm/mach-lh7a40x/time.c index c25316d0253..e50e60b3385 100644 --- a/arch/arm/mach-lh7a40x/time.c +++ b/arch/arm/mach-lh7a40x/time.c @@ -41,13 +41,9 @@ static irqreturn_t lh7a40x_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); - TIMER_EOI = 0; timer_tick(); - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig new file mode 100644 index 00000000000..3553babbbf0 --- /dev/null +++ b/arch/arm/mach-msm/Kconfig @@ -0,0 +1,18 @@ +if ARCH_MSM7X00A + +comment "MSM7X00A Board Type" + depends on ARCH_MSM7X00A + +config MACH_HALIBUT + depends on ARCH_MSM7X00A + default y + bool "Halibut Board (QCT SURF7200A)" + help + Support for the Qualcomm SURF7200A eval board. + +config MSM7X00A_IDLE + depends on ARCH_MSM7X00A + default y + bool "Idle Support for MSM7X00A" + +endif diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile new file mode 100644 index 00000000000..d12f2365585 --- /dev/null +++ b/arch/arm/mach-msm/Makefile @@ -0,0 +1,7 @@ +obj-y += io.o idle.o irq.o timer.o dma.o + +# Common code for board init +obj-y += common.o + +obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o + diff --git a/arch/arm/mach-msm/Makefile.boot b/arch/arm/mach-msm/Makefile.boot new file mode 100644 index 00000000000..24dfbf8c07c --- /dev/null +++ b/arch/arm/mach-msm/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x10008000 +params_phys-y := 0x10000100 +initrd_phys-y := 0x10800000 diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c new file mode 100644 index 00000000000..86dfb2b5261 --- /dev/null +++ b/arch/arm/mach-msm/board-halibut.c @@ -0,0 +1,114 @@ +/* linux/arch/arm/mach-msm/board-halibut.c + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/input.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <asm/arch/board.h> +#include <asm/arch/msm_iomap.h> + +#include <asm/io.h> +#include <asm/delay.h> + +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> + +static struct resource smc91x_resources[] = { + [0] = { + .start = 0x9C004300, + .end = 0x9C004400, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSM_GPIO_TO_INT(49), + .end = MSM_GPIO_TO_INT(49), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static void mddi0_panel_power(int on) +{ +} + +static struct msm_mddi_platform_data msm_mddi0_pdata = { + .panel_power = mddi0_panel_power, + .has_vsync_irq = 0, +}; + +static struct platform_device msm_mddi0_device = { + .name = "msm_mddi", + .id = 0, + .dev = { + .platform_data = &msm_mddi0_pdata + }, +}; + +static struct platform_device msm_serial0_device = { + .name = "msm_serial", + .id = 0, +}; + +static struct platform_device *devices[] __initdata = { + &msm_serial0_device, + &msm_mddi0_device, + &smc91x_device, +}; + +extern struct sys_timer msm_timer; + +static void __init halibut_init_irq(void) +{ + msm_init_irq(); +} + +static void __init halibut_init(void) +{ + platform_add_devices(devices, ARRAY_SIZE(devices)); + msm_add_devices(); +} + +static void __init halibut_map_io(void) +{ + msm_map_common_io(); +} + +MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)") + +/* UART for LL DEBUG */ + .phys_io = MSM_UART1_PHYS, + .io_pg_offst = ((MSM_UART1_BASE) >> 18) & 0xfffc, + + .boot_params = 0x10000100, + .map_io = halibut_map_io, + .init_irq = halibut_init_irq, + .init_machine = halibut_init, + .timer = &msm_timer, +MACHINE_END diff --git a/arch/arm/mach-msm/common.c b/arch/arm/mach-msm/common.c new file mode 100644 index 00000000000..3f5d3362f88 --- /dev/null +++ b/arch/arm/mach-msm/common.c @@ -0,0 +1,116 @@ +/* linux/arch/arm/mach-msm/common.c + * + * Common setup code for MSM7K Boards + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach/flash.h> +#include <asm/io.h> + +#include <asm/setup.h> + +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> + +#include <asm/arch/msm_iomap.h> + +#include <asm/arch/board.h> + +struct flash_platform_data msm_nand_data = { + .parts = 0, + .nr_parts = 0, +}; + +static struct resource msm_nand_resources[] = { + [0] = { + .start = 7, + .end = 7, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device msm_nand_device = { + .name = "msm_nand", + .id = -1, + .num_resources = ARRAY_SIZE(msm_nand_resources), + .resource = msm_nand_resources, + .dev = { + .platform_data = &msm_nand_data, + }, +}; + +static struct platform_device msm_smd_device = { + .name = "msm_smd", + .id = -1, +}; + +static struct resource msm_i2c_resources[] = { + { + .start = MSM_I2C_BASE, + .end = MSM_I2C_BASE + MSM_I2C_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_PWB_I2C, + .end = INT_PWB_I2C, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device msm_i2c_device = { + .name = "msm_i2c", + .id = 0, + .num_resources = ARRAY_SIZE(msm_i2c_resources), + .resource = msm_i2c_resources, +}; + +static struct resource usb_resources[] = { + { + .start = MSM_HSUSB_PHYS, + .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_USB_HS, + .end = INT_USB_HS, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device msm_hsusb_device = { + .name = "msm_hsusb", + .id = -1, + .num_resources = ARRAY_SIZE(usb_resources), + .resource = usb_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, +}; + +static struct platform_device *devices[] __initdata = { + &msm_nand_device, + &msm_smd_device, + &msm_i2c_device, + &msm_hsusb_device, +}; + +void __init msm_add_devices(void) +{ + platform_add_devices(devices, ARRAY_SIZE(devices)); +} diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c new file mode 100644 index 00000000000..8b0f339b327 --- /dev/null +++ b/arch/arm/mach-msm/dma.c @@ -0,0 +1,214 @@ +/* linux/arch/arm/mach-msm/dma.c + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <asm/io.h> +#include <linux/interrupt.h> +#include <asm/arch/dma.h> + +#define MSM_DMOV_CHANNEL_COUNT 16 + +enum { + MSM_DMOV_PRINT_ERRORS = 1, + MSM_DMOV_PRINT_IO = 2, + MSM_DMOV_PRINT_FLOW = 4 +}; + +static DEFINE_SPINLOCK(msm_dmov_lock); +static struct msm_dmov_cmd active_command; +static struct list_head ready_commands[MSM_DMOV_CHANNEL_COUNT]; +static struct list_head active_commands[MSM_DMOV_CHANNEL_COUNT]; +unsigned int msm_dmov_print_mask = MSM_DMOV_PRINT_ERRORS; + +#define MSM_DMOV_DPRINTF(mask, format, args...) \ + do { \ + if ((mask) & msm_dmov_print_mask) \ + printk(KERN_ERR format, args); \ + } while (0) +#define PRINT_ERROR(format, args...) \ + MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_ERRORS, format, args); +#define PRINT_IO(format, args...) \ + MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_IO, format, args); +#define PRINT_FLOW(format, args...) \ + MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_FLOW, format, args); + +void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) +{ + unsigned long irq_flags; + unsigned int status; + + spin_lock_irqsave(&msm_dmov_lock, irq_flags); + status = readl(DMOV_STATUS(id)); + if (list_empty(&ready_commands[id]) && + (status & DMOV_STATUS_CMD_PTR_RDY)) { +#if 0 + if (list_empty(&active_commands[id])) { + PRINT_FLOW("msm_dmov_enqueue_cmd(%d), enable interrupt\n", id); + writel(DMOV_CONFIG_IRQ_EN, DMOV_CONFIG(id)); + } +#endif + PRINT_IO("msm_dmov_enqueue_cmd(%d), start command, status %x\n", id, status); + list_add_tail(&cmd->list, &active_commands[id]); + writel(cmd->cmdptr, DMOV_CMD_PTR(id)); + } else { + if (list_empty(&active_commands[id])) + PRINT_ERROR("msm_dmov_enqueue_cmd(%d), error datamover stalled, status %x\n", id, status); + + PRINT_IO("msm_dmov_enqueue_cmd(%d), enqueue command, status %x\n", id, status); + list_add_tail(&cmd->list, &ready_commands[id]); + } + spin_unlock_irqrestore(&msm_dmov_lock, irq_flags); +} + +struct msm_dmov_exec_cmdptr_cmd { + struct msm_dmov_cmd dmov_cmd; + struct completion complete; + unsigned id; + unsigned int result; + unsigned int flush[6]; +}; + +static void dmov_exec_cmdptr_complete_func(struct msm_dmov_cmd *_cmd, unsigned int result) +{ + struct msm_dmov_exec_cmdptr_cmd *cmd = container_of(_cmd, struct msm_dmov_exec_cmdptr_cmd, dmov_cmd); + cmd->result = result; + if (result != 0x80000002) { + cmd->flush[0] = readl(DMOV_FLUSH0(cmd->id)); + cmd->flush[1] = readl(DMOV_FLUSH1(cmd->id)); + cmd->flush[2] = readl(DMOV_FLUSH2(cmd->id)); + cmd->flush[3] = readl(DMOV_FLUSH3(cmd->id)); + cmd->flush[4] = readl(DMOV_FLUSH4(cmd->id)); + cmd->flush[5] = readl(DMOV_FLUSH5(cmd->id)); + } + complete(&cmd->complete); +} + +int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) +{ + struct msm_dmov_exec_cmdptr_cmd cmd; + + PRINT_FLOW("dmov_exec_cmdptr(%d, %x)\n", id, cmdptr); + + cmd.dmov_cmd.cmdptr = cmdptr; + cmd.dmov_cmd.complete_func = dmov_exec_cmdptr_complete_func; + cmd.id = id; + init_completion(&cmd.complete); + + msm_dmov_enqueue_cmd(id, &cmd.dmov_cmd); + wait_for_completion(&cmd.complete); + + if (cmd.result != 0x80000002) { + PRINT_ERROR("dmov_exec_cmdptr(%d): ERROR, result: %x\n", id, cmd.result); + PRINT_ERROR("dmov_exec_cmdptr(%d): flush: %x %x %x %x\n", + id, cmd.flush[0], cmd.flush[1], cmd.flush[2], cmd.flush[3]); + return -EIO; + } + PRINT_FLOW("dmov_exec_cmdptr(%d, %x) done\n", id, cmdptr); + return 0; +} + + +static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id) +{ + unsigned int int_status, mask, id; + unsigned long irq_flags; + unsigned int ch_status; + unsigned int ch_result; + struct msm_dmov_cmd *cmd; + + spin_lock_irqsave(&msm_dmov_lock, irq_flags); + + int_status = readl(DMOV_ISR); /* read and clear interrupt */ + PRINT_FLOW("msm_datamover_irq_handler: DMOV_ISR %x\n", int_status); + + while (int_status) { + mask = int_status & -int_status; + id = fls(mask) - 1; + PRINT_FLOW("msm_datamover_irq_handler %08x %08x id %d\n", int_status, mask, id); + int_status &= ~mask; + ch_status = readl(DMOV_STATUS(id)); + if (!(ch_status & DMOV_STATUS_RSLT_VALID)) { + PRINT_FLOW("msm_datamover_irq_handler id %d, result not valid %x\n", id, ch_status); + continue; + } + do { + ch_result = readl(DMOV_RSLT(id)); + if (list_empty(&active_commands[id])) { + PRINT_ERROR("msm_datamover_irq_handler id %d, got result " + "with no active command, status %x, result %x\n", + id, ch_status, ch_result); + cmd = NULL; + } else + cmd = list_entry(active_commands[id].next, typeof(*cmd), list); + PRINT_FLOW("msm_datamover_irq_handler id %d, status %x, result %x\n", id, ch_status, ch_result); + if (ch_result & DMOV_RSLT_DONE) { + PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", + id, ch_status); + PRINT_IO("msm_datamover_irq_handler id %d, got result " + "for %p, result %x\n", id, cmd, ch_result); + if (cmd) { + list_del(&cmd->list); + cmd->complete_func(cmd, ch_result); + } + } + if (ch_result & DMOV_RSLT_FLUSH) { + unsigned int flush0 = readl(DMOV_FLUSH0(id)); + PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); + PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, flush0); + if (cmd) { + list_del(&cmd->list); + cmd->complete_func(cmd, ch_result); + } + } + if (ch_result & DMOV_RSLT_ERROR) { + unsigned int flush0 = readl(DMOV_FLUSH0(id)); + PRINT_ERROR("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); + PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, flush0); + if (cmd) { + list_del(&cmd->list); + cmd->complete_func(cmd, ch_result); + } + /* this does not seem to work, once we get an error */ + /* the datamover will no longer accept commands */ + writel(0, DMOV_FLUSH0(id)); + } + ch_status = readl(DMOV_STATUS(id)); + PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); + if ((ch_status & DMOV_STATUS_CMD_PTR_RDY) && !list_empty(&ready_commands[id])) { + cmd = list_entry(ready_commands[id].next, typeof(*cmd), list); + list_del(&cmd->list); + list_add_tail(&cmd->list, &active_commands[id]); + PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id); + writel(cmd->cmdptr, DMOV_CMD_PTR(id)); + } + } while (ch_status & DMOV_STATUS_RSLT_VALID); + PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); + } + spin_unlock_irqrestore(&msm_dmov_lock, irq_flags); + return IRQ_HANDLED; +} + +static int __init msm_init_datamover(void) +{ + int i; + for (i = 0; i < MSM_DMOV_CHANNEL_COUNT; i++) { + INIT_LIST_HEAD(&ready_commands[i]); + INIT_LIST_HEAD(&active_commands[i]); + writel(DMOV_CONFIG_IRQ_EN | DMOV_CONFIG_FORCE_TOP_PTR_RSLT | DMOV_CONFIG_FORCE_FLUSH_RSLT, DMOV_CONFIG(i)); + } + return request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL); +} + +arch_initcall(msm_init_datamover); + diff --git a/arch/arm/mach-msm/idle.S b/arch/arm/mach-msm/idle.S new file mode 100644 index 00000000000..2b1cb7f1694 --- /dev/null +++ b/arch/arm/mach-msm/idle.S @@ -0,0 +1,36 @@ +/* linux/include/asm-arm/arch-msm/idle.S + * + * Idle processing for MSM7K - work around bugs with SWFI. + * + * Copyright (c) 2007 QUALCOMM Incorporated. + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +ENTRY(arch_idle) +#ifdef CONFIG_MSM7X00A_IDLE + mrc p15, 0, r1, c1, c0, 0 /* read current CR */ + bic r0, r1, #(1 << 2) /* clear dcache bit */ + bic r0, r0, #(1 << 12) /* clear icache bit */ + mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ + + mov r0, #0 /* prepare wfi value */ + mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ + mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ + mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ + + mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ +#endif + mov pc, lr diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c new file mode 100644 index 00000000000..c39edb994a8 --- /dev/null +++ b/arch/arm/mach-msm/io.c @@ -0,0 +1,85 @@ +/* arch/arm/mach-msm/io.c + * + * MSM7K io support + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/page.h> +#include <asm/arch/msm_iomap.h> +#include <asm/mach/map.h> + +#include <asm/arch/board.h> + +#define MSM_DEVICE(name) { \ + .virtual = MSM_##name##_BASE, \ + .pfn = __phys_to_pfn(MSM_##name##_PHYS), \ + .length = MSM_##name##_SIZE, \ + .type = MT_DEVICE_NONSHARED, \ + } + +static struct map_desc msm_io_desc[] __initdata = { + MSM_DEVICE(VIC), + MSM_DEVICE(CSR), + MSM_DEVICE(GPT), + MSM_DEVICE(DMOV), + MSM_DEVICE(UART1), + MSM_DEVICE(UART2), + MSM_DEVICE(UART3), + MSM_DEVICE(I2C), + MSM_DEVICE(GPIO1), + MSM_DEVICE(GPIO2), + MSM_DEVICE(HSUSB), + MSM_DEVICE(CLK_CTL), + MSM_DEVICE(PMDH), + MSM_DEVICE(EMDH), + MSM_DEVICE(MDP), + { + .virtual = MSM_SHARED_RAM_BASE, + .pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS), + .length = MSM_SHARED_RAM_SIZE, + .type = MT_DEVICE, + }, +}; + +void __init msm_map_common_io(void) +{ + /* Make sure the peripheral register window is closed, since + * we will use PTE flags (TEX[1]=1,B=0,C=1) to determine which + * pages are peripheral interface or not. + */ + asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0)); + + iotable_init(msm_io_desc, ARRAY_SIZE(msm_io_desc)); +} + +void __iomem * +__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype) +{ + if (mtype == MT_DEVICE) { + /* The peripherals in the 88000000 - D0000000 range + * are only accessable by type MT_DEVICE_NONSHARED. + * Adjust mtype as necessary to make this "just work." + */ + if ((phys_addr >= 0x88000000) && (phys_addr < 0xD0000000)) + mtype = MT_DEVICE_NONSHARED; + } + + return __arm_ioremap(phys_addr, size, mtype); +} diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c new file mode 100644 index 00000000000..24158040b78 --- /dev/null +++ b/arch/arm/mach-msm/irq.c @@ -0,0 +1,154 @@ +/* linux/arch/arm/mach-msm/irq.c + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/ptrace.h> +#include <linux/timer.h> + +#include <linux/irq.h> +#include <asm/hardware.h> + +#include <asm/io.h> + +#include <asm/arch/msm_iomap.h> + +#define VIC_REG(off) (MSM_VIC_BASE + (off)) + +#define VIC_INT_SELECT0 VIC_REG(0x0000) /* 1: FIQ, 0: IRQ */ +#define VIC_INT_SELECT1 VIC_REG(0x0004) /* 1: FIQ, 0: IRQ */ +#define VIC_INT_EN0 VIC_REG(0x0010) +#define VIC_INT_EN1 VIC_REG(0x0014) +#define VIC_INT_ENCLEAR0 VIC_REG(0x0020) +#define VIC_INT_ENCLEAR1 VIC_REG(0x0024) +#define VIC_INT_ENSET0 VIC_REG(0x0030) +#define VIC_INT_ENSET1 VIC_REG(0x0034) +#define VIC_INT_TYPE0 VIC_REG(0x0040) /* 1: EDGE, 0: LEVEL */ +#define VIC_INT_TYPE1 VIC_REG(0x0044) /* 1: EDGE, 0: LEVEL */ +#define VIC_INT_POLARITY0 VIC_REG(0x0050) /* 1: NEG, 0: POS */ +#define VIC_INT_POLARITY1 VIC_REG(0x0054) /* 1: NEG, 0: POS */ +#define VIC_NO_PEND_VAL VIC_REG(0x0060) +#define VIC_INT_MASTEREN VIC_REG(0x0064) /* 1: IRQ, 2: FIQ */ +#define VIC_PROTECTION VIC_REG(0x006C) /* 1: ENABLE */ +#define VIC_CONFIG VIC_REG(0x0068) /* 1: USE ARM1136 VIC */ +#define VIC_IRQ_STATUS0 VIC_REG(0x0080) +#define VIC_IRQ_STATUS1 VIC_REG(0x0084) +#define VIC_FIQ_STATUS0 VIC_REG(0x0090) +#define VIC_FIQ_STATUS1 VIC_REG(0x0094) +#define VIC_RAW_STATUS0 VIC_REG(0x00A0) +#define VIC_RAW_STATUS1 VIC_REG(0x00A4) +#define VIC_INT_CLEAR0 VIC_REG(0x00B0) +#define VIC_INT_CLEAR1 VIC_REG(0x00B4) +#define VIC_SOFTINT0 VIC_REG(0x00C0) +#define VIC_SOFTINT1 VIC_REG(0x00C4) +#define VIC_IRQ_VEC_RD VIC_REG(0x00D0) /* pending int # */ +#define VIC_IRQ_VEC_PEND_RD VIC_REG(0x00D4) /* pending vector addr */ +#define VIC_IRQ_VEC_WR VIC_REG(0x00D8) +#define VIC_IRQ_IN_SERVICE VIC_REG(0x00E0) +#define VIC_IRQ_IN_STACK VIC_REG(0x00E4) +#define VIC_TEST_BUS_SEL VIC_REG(0x00E8) + +#define VIC_VECTPRIORITY(n) VIC_REG(0x0200+((n) * 4)) +#define VIC_VECTADDR(n) VIC_REG(0x0400+((n) * 4)) + +static void msm_irq_ack(unsigned int irq) +{ + unsigned reg = VIC_INT_CLEAR0 + ((irq & 32) ? 4 : 0); + irq = 1 << (irq & 31); + writel(irq, reg); +} + +static void msm_irq_mask(unsigned int irq) +{ + unsigned reg = VIC_INT_ENCLEAR0 + ((irq & 32) ? 4 : 0); + writel(1 << (irq & 31), reg); +} + +static void msm_irq_unmask(unsigned int irq) +{ + unsigned reg = VIC_INT_ENSET0 + ((irq & 32) ? 4 : 0); + writel(1 << (irq & 31), reg); +} + +static int msm_irq_set_wake(unsigned int irq, unsigned int on) +{ + return -EINVAL; +} + +static int msm_irq_set_type(unsigned int irq, unsigned int flow_type) +{ + unsigned treg = VIC_INT_TYPE0 + ((irq & 32) ? 4 : 0); + unsigned preg = VIC_INT_POLARITY0 + ((irq & 32) ? 4 : 0); + int b = 1 << (irq & 31); + + if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW)) + writel(readl(preg) | b, preg); + if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH)) + writel(readl(preg) & (~b), preg); + + if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) { + writel(readl(treg) | b, treg); + set_irq_handler(irq, handle_edge_irq); + } + if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) { + writel(readl(treg) & (~b), treg); + set_irq_handler(irq, handle_level_irq); + } + return 0; +} + +static struct irq_chip msm_irq_chip = { + .name = "msm", + .ack = msm_irq_ack, + .mask = msm_irq_mask, + .unmask = msm_irq_unmask, + .set_wake = msm_irq_set_wake, + .set_type = msm_irq_set_type, +}; + +void __init msm_init_irq(void) +{ + unsigned n; + + /* select level interrupts */ + writel(0, VIC_INT_TYPE0); + writel(0, VIC_INT_TYPE1); + + /* select highlevel interrupts */ + writel(0, VIC_INT_POLARITY0); + writel(0, VIC_INT_POLARITY1); + + /* select IRQ for all INTs */ + writel(0, VIC_INT_SELECT0); + writel(0, VIC_INT_SELECT1); + + /* disable all INTs */ + writel(0, VIC_INT_EN0); + writel(0, VIC_INT_EN1); + + /* don't use 1136 vic */ + writel(0, VIC_CONFIG); + + /* enable interrupt controller */ + writel(1, VIC_INT_MASTEREN); + + for (n = 0; n < NR_MSM_IRQS; n++) { + set_irq_chip(n, &msm_irq_chip); + set_irq_handler(n, handle_level_irq); + set_irq_flags(n, IRQF_VALID); + } +} diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c new file mode 100644 index 00000000000..bd4732d1ab3 --- /dev/null +++ b/arch/arm/mach-msm/timer.c @@ -0,0 +1,205 @@ +/* linux/arch/arm/mach-msm/timer.c + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/init.h> +#include <linux/time.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/delay.h> + +#include <asm/mach/time.h> +#include <asm/arch/msm_iomap.h> + +#include <asm/io.h> + +#define MSM_DGT_BASE (MSM_GPT_BASE + 0x10) +#define MSM_DGT_SHIFT (5) + +#define TIMER_MATCH_VAL 0x0000 +#define TIMER_COUNT_VAL 0x0004 +#define TIMER_ENABLE 0x0008 +#define TIMER_ENABLE_CLR_ON_MATCH_EN 2 +#define TIMER_ENABLE_EN 1 +#define TIMER_CLEAR 0x000C + +#define CSR_PROTECTION 0x0020 +#define CSR_PROTECTION_EN 1 + +#define GPT_HZ 32768 +#define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */ + +struct msm_clock { + struct clock_event_device clockevent; + struct clocksource clocksource; + struct irqaction irq; + uint32_t regbase; + uint32_t freq; + uint32_t shift; +}; + +static irqreturn_t msm_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + evt->event_handler(evt); + return IRQ_HANDLED; +} + +static cycle_t msm_gpt_read(void) +{ + return readl(MSM_GPT_BASE + TIMER_COUNT_VAL); +} + +static cycle_t msm_dgt_read(void) +{ + return readl(MSM_DGT_BASE + TIMER_COUNT_VAL) >> MSM_DGT_SHIFT; +} + +static int msm_timer_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + struct msm_clock *clock = container_of(evt, struct msm_clock, clockevent); + uint32_t now = readl(clock->regbase + TIMER_COUNT_VAL); + uint32_t alarm = now + (cycles << clock->shift); + int late; + + writel(alarm, clock->regbase + TIMER_MATCH_VAL); + now = readl(clock->regbase + TIMER_COUNT_VAL); + late = now - alarm; + if (late >= (-2 << clock->shift) && late < DGT_HZ*5) { + printk(KERN_NOTICE "msm_timer_set_next_event(%lu) clock %s, " + "alarm already expired, now %x, alarm %x, late %d\n", + cycles, clock->clockevent.name, now, alarm, late); + return -ETIME; + } + return 0; +} + +static void msm_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + struct msm_clock *clock = container_of(evt, struct msm_clock, clockevent); + switch (mode) { + case CLOCK_EVT_MODE_RESUME: + case CLOCK_EVT_MODE_PERIODIC: + break; + case CLOCK_EVT_MODE_ONESHOT: + writel(TIMER_ENABLE_EN, clock->regbase + TIMER_ENABLE); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + writel(0, clock->regbase + TIMER_ENABLE); + break; + } +} + +static struct msm_clock msm_clocks[] = { + { + .clockevent = { + .name = "gp_timer", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .rating = 200, + .set_next_event = msm_timer_set_next_event, + .set_mode = msm_timer_set_mode, + }, + .clocksource = { + .name = "gp_timer", + .rating = 200, + .read = msm_gpt_read, + .mask = CLOCKSOURCE_MASK(32), + .shift = 24, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + }, + .irq = { + .name = "gp_timer", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING, + .handler = msm_timer_interrupt, + .dev_id = &msm_clocks[0].clockevent, + .irq = INT_GP_TIMER_EXP + }, + .regbase = MSM_GPT_BASE, + .freq = GPT_HZ + }, + { + .clockevent = { + .name = "dg_timer", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32 + MSM_DGT_SHIFT, + .rating = 300, + .set_next_event = msm_timer_set_next_event, + .set_mode = msm_timer_set_mode, + }, + .clocksource = { + .name = "dg_timer", + .rating = 300, + .read = msm_dgt_read, + .mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)), + .shift = 24 - MSM_DGT_SHIFT, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + }, + .irq = { + .name = "dg_timer", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING, + .handler = msm_timer_interrupt, + .dev_id = &msm_clocks[1].clockevent, + .irq = INT_DEBUG_TIMER_EXP + }, + .regbase = MSM_DGT_BASE, + .freq = DGT_HZ >> MSM_DGT_SHIFT, + .shift = MSM_DGT_SHIFT + } +}; + +static void __init msm_timer_init(void) +{ + int i; + int res; + + for (i = 0; i < ARRAY_SIZE(msm_clocks); i++) { + struct msm_clock *clock = &msm_clocks[i]; + struct clock_event_device *ce = &clock->clockevent; + struct clocksource *cs = &clock->clocksource; + writel(0, clock->regbase + TIMER_ENABLE); + writel(0, clock->regbase + TIMER_CLEAR); + writel(~0, clock->regbase + TIMER_MATCH_VAL); + + ce->mult = div_sc(clock->freq, NSEC_PER_SEC, ce->shift); + /* allow at least 10 seconds to notice that the timer wrapped */ + ce->max_delta_ns = + clockevent_delta2ns(0xf0000000 >> clock->shift, ce); + /* 4 gets rounded down to 3 */ + ce->min_delta_ns = clockevent_delta2ns(4, ce); + ce->cpumask = cpumask_of_cpu(0); + + cs->mult = clocksource_hz2mult(clock->freq, cs->shift); + res = clocksource_register(cs); + if (res) + printk(KERN_ERR "msm_timer_init: clocksource_register " + "failed for %s\n", cs->name); + + res = setup_irq(clock->irq.irq, &clock->irq); + if (res) + printk(KERN_ERR "msm_timer_init: setup_irq " + "failed for %s\n", cs->name); + + clockevents_register_device(ce); + } +} + +struct sys_timer msm_timer = { + .init = msm_timer_init +}; diff --git a/arch/arm/mach-mx3/time.c b/arch/arm/mach-mx3/time.c index e81fb5c5d7c..fb565c98dbf 100644 --- a/arch/arm/mach-mx3/time.c +++ b/arch/arm/mach-mx3/time.c @@ -45,8 +45,6 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) { unsigned int next_match; - write_seqlock(&xtime_lock); - if (__raw_readl(MXC_GPT_GPTSR) & GPTSR_OF1) { do { timer_tick(); @@ -57,8 +55,6 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) __raw_readl(MXC_GPT_GPTCNT)) <= 0); } - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c index 4762e207b0b..ea07b54afa5 100644 --- a/arch/arm/mach-netx/time.c +++ b/arch/arm/mach-netx/time.c @@ -33,12 +33,8 @@ static irqreturn_t netx_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); - timer_tick(); - write_sequnlock(&xtime_lock); - /* acknowledge interrupt */ writel(COUNTER_BIT(0), NETX_GPIO_IRQ); diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 130681201c1..9393824cc15 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -27,6 +27,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/input.h> +#include <linux/i2c/tps65010.h> #include <asm/hardware.h> #include <asm/gpio.h> @@ -36,7 +37,6 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/arch/tps65010.h> #include <asm/arch/mux.h> #include <asm/arch/tc.h> #include <asm/arch/irda.h> diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 4f84ae273a1..978cdab1653 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -26,6 +26,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/input.h> +#include <linux/i2c/tps65010.h> #include <asm/setup.h> #include <asm/page.h> @@ -37,7 +38,6 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/arch/tps65010.h> #include <asm/arch/gpioexpander.h> #include <asm/arch/irqs.h> #include <asm/arch/mux.h> diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 182a98a9df4..e2c8ffd75cf 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -32,7 +32,6 @@ #include <asm/arch/common.h> #include <asm/arch/dsp_common.h> #include <asm/arch/aic23.h> -#include <asm/arch/gpio.h> #include <asm/arch/omapfb.h> #include <asm/arch/lcd_mipid.h> diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 5db182da322..4e016179f31 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -31,12 +31,13 @@ #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/interrupt.h> #include <linux/i2c.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/i2c/tps65010.h> + #include <asm/hardware.h> #include <asm/gpio.h> @@ -46,7 +47,6 @@ #include <asm/mach/flash.h> #include <asm/arch/usb.h> -#include <asm/arch/tps65010.h> #include <asm/arch/mux.h> #include <asm/arch/tc.h> #include <asm/arch/common.h> diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index e47010fec27..ed7094a7006 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -42,7 +42,6 @@ #include <asm/arch/common.h> #include <asm/arch/omap-alsa.h> -#include <linux/input.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index c275d517764..a9a0f6610c3 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -44,7 +44,6 @@ #include <asm/arch/common.h> #include <asm/arch/omap-alsa.h> -#include <linux/input.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c index 86de303ecab..6939d5e7569 100644 --- a/arch/arm/mach-omap1/leds-osk.c +++ b/arch/arm/mach-omap1/leds-osk.c @@ -5,13 +5,13 @@ */ #include <linux/init.h> #include <linux/workqueue.h> +#include <linux/i2c/tps65010.h> #include <asm/hardware.h> #include <asm/leds.h> #include <asm/system.h> #include <asm/arch/gpio.h> -#include <asm/arch/tps65010.h> #include "leds.h" diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index d9805e3d930..06b7e54a012 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -639,7 +639,7 @@ static void omap_pm_finish(void) } -static irqreturn_t omap_wakeup_interrupt(int irq, void *dev) +static irqreturn_t omap_wakeup_interrupt(int irq, void *dev) { return IRQ_HANDLED; } diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 3bb49c17c85..94e38cc2bb6 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -26,7 +26,6 @@ #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/leds.h> -#include <linux/irq.h> #include <asm/hardware.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 8d322c20cca..3234deedb94 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -40,13 +40,9 @@ static inline void omap2_gp_timer_start(unsigned long load_val) static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); - omap_dm_timer_write_status(gptimer, OMAP_TIMER_INT_OVERFLOW); timer_tick(); - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c index 67e05f005a6..6d4ca8fc0cb 100644 --- a/arch/arm/mach-pnx4008/time.c +++ b/arch/arm/mach-pnx4008/time.c @@ -51,8 +51,6 @@ static irqreturn_t pnx4008_timer_interrupt(int irq, void *dev_id) { if (__raw_readl(HSTIM_INT) & MATCH0_INT) { - write_seqlock(&xtime_lock); - do { timer_tick(); @@ -73,8 +71,6 @@ static irqreturn_t pnx4008_timer_interrupt(int irq, void *dev_id) } while ((signed) (__raw_readl(HSTIM_MATCH0) - __raw_readl(HSTIM_COUNTER)) < 0); - - write_sequnlock(&xtime_lock); } return IRQ_HANDLED; diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c index 12d2fe0ceff..254892ac30c 100644 --- a/arch/arm/mach-pxa/akita-ioexp.c +++ b/arch/arm/mach-pxa/akita-ioexp.c @@ -29,7 +29,7 @@ #define MAX7310_TIMEOUT 0x04 /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x18, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x18, I2C_CLIENT_END }; /* I2C Magic */ I2C_CLIENT_INSMOD; diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 9732d5d9466..006a6e09589 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -111,11 +111,14 @@ static const struct clkops clk_pxa25x_lcd_ops = { * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly) */ +static struct clk pxa25x_hwuart_clk = + INIT_CKEN("UARTCLK", HWUART, 14745600, 1, &pxa_device_hwuart.dev) +; + static struct clk pxa25x_clks[] = { INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev), INIT_CKEN("UARTCLK", FFUART, 14745600, 1, &pxa_device_ffuart.dev), INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev), - INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev), INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL), INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa_device_udc.dev), INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev), @@ -303,6 +306,10 @@ static int __init pxa25x_init(void) { int ret = 0; + /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */ + if (cpu_is_pxa25x()) + clks_register(&pxa25x_hwuart_clk, 1); + if (cpu_is_pxa21x() || cpu_is_pxa25x()) { clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks)); diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 8e126e6b74c..57efebdc432 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -24,6 +24,7 @@ #include <asm/arch/ohci.h> #include <asm/arch/pm.h> #include <asm/arch/dma.h> +#include <asm/arch/i2c.h> #include "generic.h" #include "devices.h" @@ -423,6 +424,11 @@ struct platform_device pxa27x_device_i2c_power = { .num_resources = ARRAY_SIZE(i2c_power_resources), }; +void __init pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info) +{ + pxa27x_device_i2c_power.dev.platform_data = info; +} + static struct platform_device *devices[] __initdata = { &pxa_device_mci, &pxa_device_udc, diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 61d9c9d69e6..37e93f9ba8f 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -86,7 +86,7 @@ unsigned int pxa3xx_get_clk_frequency_khz(int info) HSS / 1000000, (HSS % 1000000) / 10000); } - return CLK; + return CLK / 1000; } /* diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c index 422afee8816..b2eb38543d1 100644 --- a/arch/arm/mach-pxa/ssp.c +++ b/arch/arm/mach-pxa/ssp.c @@ -67,7 +67,7 @@ static int use_count[PXA_SSP_PORTS] = {0, 0, 0}; static irqreturn_t ssp_interrupt(int irq, void *dev_id) { - struct ssp_dev *dev = (struct ssp_dev*) dev_id; + struct ssp_dev *dev = dev_id; unsigned int status = SSSR_P(dev->port); SSSR_P(dev->port) = status; /* clear status bits */ diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index c7f1b44da40..61d70218f1e 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -530,8 +530,6 @@ static unsigned long realview_gettimeoffset(void) */ static irqreturn_t realview_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); - // ...clear the interrupt writel(1, TIMER0_VA_BASE + TIMER_INTCLR); @@ -542,8 +540,6 @@ static irqreturn_t realview_timer_interrupt(int irq, void *dev_id) update_process_times(user_mode(get_irq_regs())); #endif - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 587864fe25f..66175471fff 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -530,7 +530,7 @@ static struct s3c2410fb_mach_info __initdata bast_fb_info = { .displays = bast_lcd_info, .num_displays = ARRAY_SIZE(bast_lcd_info), - .default_display = 4, + .default_display = 1, }; /* Standard BAST devices */ @@ -540,7 +540,6 @@ static struct platform_device *bast_devices[] __initdata = { &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c, - &s3c_device_iis, &s3c_device_rtc, &s3c_device_nand, &bast_device_nor, diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 9f43f3f124f..3aade7b78fe 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -365,7 +365,6 @@ static struct platform_device *vr1000_devices[] __initdata = { &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c, - &s3c_device_iis, &s3c_device_adc, &serial_device, &vr1000_nor, diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c index bcd562ac1d3..6aec86a5da5 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.c +++ b/arch/arm/mach-s3c2410/usb-simtec.c @@ -60,7 +60,7 @@ usb_simtec_powercontrol(int port, int to) static irqreturn_t usb_simtec_ocirq(int irq, void *pw) { - struct s3c2410_hcd_info *info = (struct s3c2410_hcd_info *)pw; + struct s3c2410_hcd_info *info = pw; if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) { pr_debug("usb_simtec: over-current irq (oc detected)\n"); diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index 8e8fe48ea47..0b43431d4b7 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -10,6 +10,7 @@ config CPU_S3C2412 select CPU_LLSERIAL_S3C2440 select S3C2412_PM if PM select S3C2412_DMA if S3C2410_DMA + select S3C2410_GPIO help Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile index f8e011691b3..267f3348301 100644 --- a/arch/arm/mach-s3c2412/Makefile +++ b/arch/arm/mach-s3c2412/Makefile @@ -12,8 +12,9 @@ obj- := obj-$(CONFIG_CPU_S3C2412) += s3c2412.o obj-$(CONFIG_CPU_S3C2412) += irq.o obj-$(CONFIG_CPU_S3C2412) += clock.o +obj-$(CONFIG_CPU_S3C2412) += gpio.o obj-$(CONFIG_S3C2412_DMA) += dma.o -obj-$(CONFIG_S3C2412_PM) += pm.o +obj-$(CONFIG_S3C2412_PM) += pm.o sleep.o # Machine support diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c index 45899360189..2697a65ba72 100644 --- a/arch/arm/mach-s3c2412/clock.c +++ b/arch/arm/mach-s3c2412/clock.c @@ -217,7 +217,7 @@ static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent) if (parent == &clk_mdivclk) clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL; - else if (parent == &clk_upll) + else if (parent == &clk_mpll) clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL; else return -EINVAL; @@ -234,6 +234,45 @@ static struct clk clk_msysclk = { .set_parent = s3c2412_setparent_msysclk, }; +static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent) +{ + unsigned long flags; + unsigned long clkdiv; + unsigned long dvs; + + /* Note, we current equate fclk andf msysclk for S3C2412 */ + + if (parent == &clk_msysclk || parent == &clk_f) + dvs = 0; + else if (parent == &clk_h) + dvs = S3C2412_CLKDIVN_DVSEN; + else + return -EINVAL; + + clk->parent = parent; + + /* update this under irq lockdown, clkdivn is not protected + * by the clock system. */ + + local_irq_save(flags); + + clkdiv = __raw_readl(S3C2410_CLKDIVN); + clkdiv &= ~S3C2412_CLKDIVN_DVSEN; + clkdiv |= dvs; + __raw_writel(clkdiv, S3C2410_CLKDIVN); + + local_irq_restore(flags); + + return 0; +} + +static struct clk clk_armclk = { + .name = "armclk", + .id = -1, + .parent = &clk_msysclk, + .set_parent = s3c2412_setparent_armclk, +}; + /* these next clocks have an divider immediately after them, * so we can register them with their divider and leave out the * intermediate clock stage @@ -630,11 +669,13 @@ static struct clk *clks[] __initdata = { &clk_erefclk, &clk_urefclk, &clk_mrefclk, + &clk_armclk, }; int __init s3c2412_baseclk_add(void) { unsigned long clkcon = __raw_readl(S3C2410_CLKCON); + unsigned int dvs; struct clk *clkp; int ret; int ptr; @@ -643,6 +684,8 @@ int __init s3c2412_baseclk_add(void) clk_usb_bus.parent = &clk_usbsrc; clk_usb_bus.rate = 0x0; + clk_f.parent = &clk_msysclk; + s3c2412_clk_initparents(); for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { @@ -655,6 +698,15 @@ int __init s3c2412_baseclk_add(void) } } + /* set the dvs state according to what we got at boot time */ + + dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN; + + if (dvs) + clk_armclk.parent = &clk_h; + + printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off"); + /* ensure usb bus clock is within correct rate of 48MHz */ if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) { diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index 53c1d5bbce1..1dd86499356 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -30,6 +30,7 @@ #include <asm/arch/regs-mem.h> #include <asm/arch/regs-lcd.h> #include <asm/arch/regs-sdi.h> +#include <asm/plat-s3c24xx/regs-s3c2412-iis.h> #include <asm/plat-s3c24xx/regs-iis.h> #include <asm/plat-s3c24xx/regs-spi.h> @@ -39,106 +40,141 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = { [DMACH_XD0] = { .name = "xdreq0", .channels = MAP(S3C2412_DMAREQSEL_XDREQ0), + .channels_rx = MAP(S3C2412_DMAREQSEL_XDREQ0), }, [DMACH_XD1] = { .name = "xdreq1", .channels = MAP(S3C2412_DMAREQSEL_XDREQ1), + .channels_rx = MAP(S3C2412_DMAREQSEL_XDREQ1), }, [DMACH_SDI] = { .name = "sdi", .channels = MAP(S3C2412_DMAREQSEL_SDI), - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + .channels_rx = MAP(S3C2412_DMAREQSEL_SDI), + .hw_addr.to = S3C2410_PA_SDI + S3C2410_SDIDATA, + .hw_addr.from = S3C2410_PA_SDI + S3C2410_SDIDATA, }, [DMACH_SPI0] = { .name = "spi0", .channels = MAP(S3C2412_DMAREQSEL_SPI0TX), + .channels_rx = MAP(S3C2412_DMAREQSEL_SPI0RX), .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, }, [DMACH_SPI1] = { .name = "spi1", .channels = MAP(S3C2412_DMAREQSEL_SPI1TX), + .channels_rx = MAP(S3C2412_DMAREQSEL_SPI1RX), .hw_addr.to = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPTDAT, .hw_addr.from = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPRDAT, }, [DMACH_UART0] = { .name = "uart0", .channels = MAP(S3C2412_DMAREQSEL_UART0_0), + .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_0), .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1] = { .name = "uart1", .channels = MAP(S3C2412_DMAREQSEL_UART1_0), + .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_0), .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2] = { .name = "uart2", .channels = MAP(S3C2412_DMAREQSEL_UART2_0), + .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_0), .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_UART0_SRC2] = { .name = "uart0", .channels = MAP(S3C2412_DMAREQSEL_UART0_1), + .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_1), .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1_SRC2] = { .name = "uart1", .channels = MAP(S3C2412_DMAREQSEL_UART1_1), + .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_1), .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2_SRC2] = { .name = "uart2", .channels = MAP(S3C2412_DMAREQSEL_UART2_1), + .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_1), .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_TIMER] = { .name = "timer", .channels = MAP(S3C2412_DMAREQSEL_TIMER), + .channels_rx = MAP(S3C2412_DMAREQSEL_TIMER), }, [DMACH_I2S_IN] = { .name = "i2s-sdi", .channels = MAP(S3C2412_DMAREQSEL_I2SRX), - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + .channels_rx = MAP(S3C2412_DMAREQSEL_I2SRX), + .hw_addr.from = S3C2410_PA_IIS + S3C2412_IISRXD, }, [DMACH_I2S_OUT] = { .name = "i2s-sdo", .channels = MAP(S3C2412_DMAREQSEL_I2STX), - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + .channels_rx = MAP(S3C2412_DMAREQSEL_I2STX), + .hw_addr.to = S3C2410_PA_IIS + S3C2412_IISTXD, }, [DMACH_USB_EP1] = { .name = "usb-ep1", .channels = MAP(S3C2412_DMAREQSEL_USBEP1), + .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP1), }, [DMACH_USB_EP2] = { .name = "usb-ep2", .channels = MAP(S3C2412_DMAREQSEL_USBEP2), + .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP2), }, [DMACH_USB_EP3] = { .name = "usb-ep3", .channels = MAP(S3C2412_DMAREQSEL_USBEP3), + .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP3), }, [DMACH_USB_EP4] = { .name = "usb-ep4", .channels = MAP(S3C2412_DMAREQSEL_USBEP4), + .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP4), }, }; +static void s3c2412_dma_direction(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map, + enum s3c2410_dmasrc dir) +{ + unsigned long chsel; + + if (dir == S3C2410_DMASRC_HW) + chsel = map->channels_rx[0]; + else + chsel = map->channels[0]; + + chsel &= ~DMA_CH_VALID; + chsel |= S3C2412_DMAREQSEL_HW; + + writel(chsel, chan->regs + S3C2412_DMA_DMAREQSEL); +} + static void s3c2412_dma_select(struct s3c2410_dma_chan *chan, struct s3c24xx_dma_map *map) { - writel(map->channels[0] | S3C2412_DMAREQSEL_HW, - chan->regs + S3C2412_DMA_DMAREQSEL); + s3c2412_dma_direction(chan, map, chan->source); } static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = { .select = s3c2412_dma_select, + .direction = s3c2412_dma_direction, .dcon_mask = 0, .map = s3c2412_dma_mappings, .map_size = ARRAY_SIZE(s3c2412_dma_mappings), diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c new file mode 100644 index 00000000000..8e55c3a2eab --- /dev/null +++ b/arch/arm/mach-s3c2412/gpio.c @@ -0,0 +1,60 @@ +/* linux/arch/arm/mach-s3c2412/gpio.c + * + * Copyright (c) 2007 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * http://armlinux.simtec.co.uk/. + * + * S3C2412/S3C2413 specific GPIO support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/interrupt.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <asm/arch/regs-gpio.h> + +#include <asm/hardware.h> + +int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state) +{ + void __iomem *base = S3C24XX_GPIO_BASE(pin); + unsigned long offs = S3C2410_GPIO_OFFSET(pin); + unsigned long flags; + unsigned long slpcon; + + offs *= 2; + + if (pin < S3C2410_GPIO_BANKB) + return -EINVAL; + + if (pin >= S3C2410_GPIO_BANKF && + pin <= S3C2410_GPIO_BANKG) + return -EINVAL; + + if (pin > (S3C2410_GPIO_BANKH + 32)) + return -EINVAL; + + local_irq_save(flags); + + slpcon = __raw_readl(base + 0x0C); + + slpcon &= ~(3 << offs); + slpcon |= state << offs; + + __raw_writel(slpcon, base + 0x0C); + + local_irq_restore(flags); + + return 0; +} + +EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg); diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c index e9d0c769f5d..cc1917bf952 100644 --- a/arch/arm/mach-s3c2412/irq.c +++ b/arch/arm/mach-s3c2412/irq.c @@ -33,6 +33,7 @@ #include <asm/arch/regs-irq.h> #include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-power.h> #include <asm/plat-s3c24xx/cpu.h> #include <asm/plat-s3c24xx/irq.h> @@ -153,6 +154,22 @@ static struct irq_chip s3c2412_irq_cfsdi = { .unmask = s3c2412_irq_cfsdi_unmask, }; +static int s3c2412_irq_rtc_wake(unsigned int irqno, unsigned int state) +{ + unsigned long pwrcfg; + + pwrcfg = __raw_readl(S3C2412_PWRCFG); + if (state) + pwrcfg &= ~S3C2412_PWRCFG_RTC_MASKIRQ; + else + pwrcfg |= S3C2412_PWRCFG_RTC_MASKIRQ; + __raw_writel(pwrcfg, S3C2412_PWRCFG); + + return s3c_irq_chip.set_wake(irqno, state); +} + +static struct irq_chip s3c2412_irq_rtc_chip; + static int s3c2412_irq_add(struct sys_device *sysdev) { unsigned int irqno; @@ -173,6 +190,13 @@ static int s3c2412_irq_add(struct sys_device *sysdev) set_irq_flags(irqno, IRQF_VALID); } + /* change RTC IRQ's set wake method */ + + s3c2412_irq_rtc_chip = s3c_irq_chip; + s3c2412_irq_rtc_chip.set_wake = s3c2412_irq_rtc_wake; + + set_irq_chip(IRQ_RTC, &s3c2412_irq_rtc_chip); + return 0; } diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index 8988dac388a..d4ffb2d9807 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -33,6 +33,8 @@ #include <asm/plat-s3c24xx/s3c2412.h> +extern void s3c2412_sleep_enter(void); + static void s3c2412_cpu_suspend(void) { unsigned long tmp; @@ -43,20 +45,7 @@ static void s3c2412_cpu_suspend(void) tmp |= S3C2412_PWRCFG_STANDBYWFI_SLEEP; __raw_writel(tmp, S3C2412_PWRCFG); - /* issue the standby signal into the pm unit. Note, we - * issue a write-buffer drain just in case */ - - tmp = 0; - - asm("b 1f\n\t" - ".align 5\n\t" - "1:\n\t" - "mcr p15, 0, %0, c7, c10, 4\n\t" - "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp)); - - /* we should never get past here */ - - panic("sleep resumed to originator?"); + s3c2412_sleep_enter(); } static void s3c2412_pm_prepare(void) @@ -88,7 +77,6 @@ static struct sleep_save s3c2412_sleep[] = { SAVE_ITEM(S3C2412_GPBSLPCON), SAVE_ITEM(S3C2412_GPCSLPCON), SAVE_ITEM(S3C2412_GPDSLPCON), - SAVE_ITEM(S3C2412_GPESLPCON), SAVE_ITEM(S3C2412_GPFSLPCON), SAVE_ITEM(S3C2412_GPGSLPCON), SAVE_ITEM(S3C2412_GPHSLPCON), diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index 265cd3f567a..abf1599c9f9 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -168,6 +168,8 @@ void __init s3c2412_init_clocks(int xtal) fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal*2); + clk_mpll.rate = fclk; + tmp = __raw_readl(S3C2410_CLKDIVN); /* work out clock scalings */ diff --git a/arch/arm/mach-s3c2412/sleep.S b/arch/arm/mach-s3c2412/sleep.S new file mode 100644 index 00000000000..db32cac4199 --- /dev/null +++ b/arch/arm/mach-s3c2412/sleep.S @@ -0,0 +1,68 @@ +/* linux/arch/arm/mach-s3c2412/sleep.S + * + * Copyright (c) 2007 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2412 Power Manager low-level sleep support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/hardware.h> +#include <asm/arch/map.h> + +#include <asm/arch/regs-irq.h> + + .text + + .global s3c2412_sleep_enter + +s3c2412_sleep_enter: + mov r0, #0 /* argument for coprocessors */ + ldr r1, =S3C2410_INTPND + ldr r2, =S3C2410_SRCPND + ldr r3, =S3C2410_EINTPEND + + teq r0, r0 + bl s3c2412_sleep_enter1 + teq pc, r0 + bl s3c2412_sleep_enter1 + + .align 5 + + /* this is called twice, first with the Z flag to ensure that the + * instructions have been loaded into the cache, and the second + * time to try and suspend the system. + */ +s3c2412_sleep_enter1: + mcr p15, 0, r0, c7, c10, 4 + mcrne p15, 0, r0, c7, c0, 4 + + /* if we return from here, it is because an interrupt was + * active when we tried to shutdown. Try and ack the IRQ and + * retry, as simply returning causes the system to lock. + */ + + ldrne r9, [ r1 ] + strne r9, [ r1 ] + ldrne r9, [ r2 ] + strne r9, [ r2 ] + ldrne r9, [ r3 ] + strne r9, [ r3 ] + bne s3c2412_sleep_enter1 + + mov pc, r14 diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c index 79e2ea4adaf..184d804934c 100644 --- a/arch/arm/mach-s3c2440/clock.c +++ b/arch/arm/mach-s3c2440/clock.c @@ -111,14 +111,9 @@ static struct clk s3c2440_clk_ac97 = { static int s3c2440_clk_add(struct sys_device *sysdev) { - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - unsigned long clkdivn; + struct clk *clock_upll; struct clk *clock_h; struct clk *clock_p; - struct clk *clock_upll; - - printk("S3C2440: Clock Support, DVS %s\n", - (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); clock_p = clk_get(NULL, "pclk"); clock_h = clk_get(NULL, "hclk"); @@ -129,21 +124,6 @@ static int s3c2440_clk_add(struct sys_device *sysdev) return -EINVAL; } - /* check rate of UPLL, and if it is near 96MHz, then change - * to using half the UPLL rate for the system */ - - if (clk_get_rate(clock_upll) > (94 * MHZ)) { - clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; - - mutex_lock(&clocks_mutex); - - clkdivn = __raw_readl(S3C2410_CLKDIVN); - clkdivn |= S3C2440_CLKDIVN_UCLK; - __raw_writel(clkdivn, S3C2410_CLKDIVN); - - mutex_unlock(&clocks_mutex); - } - s3c2440_clk_cam.parent = clock_h; s3c2440_clk_ac97.parent = clock_p; s3c2440_clk_cam_upll.parent = clock_upll; diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c index 5b9e830ac4d..2d030d439fe 100644 --- a/arch/arm/mach-s3c2442/clock.c +++ b/arch/arm/mach-s3c2442/clock.c @@ -115,14 +115,9 @@ static struct clk s3c2442_clk_cam_upll = { static int s3c2442_clk_add(struct sys_device *sysdev) { - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - unsigned long clkdivn; + struct clk *clock_upll; struct clk *clock_h; struct clk *clock_p; - struct clk *clock_upll; - - printk("S3C2442: Clock Support, DVS %s\n", - (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); clock_p = clk_get(NULL, "pclk"); clock_h = clk_get(NULL, "hclk"); @@ -133,21 +128,6 @@ static int s3c2442_clk_add(struct sys_device *sysdev) return -EINVAL; } - /* check rate of UPLL, and if it is near 96MHz, then change - * to using half the UPLL rate for the system */ - - if (clk_get_rate(clock_upll) > (94 * MHZ)) { - clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; - - mutex_lock(&clocks_mutex); - - clkdivn = __raw_readl(S3C2410_CLKDIVN); - clkdivn |= S3C2440_CLKDIVN_UCLK; - __raw_writel(clkdivn, S3C2410_CLKDIVN); - - mutex_unlock(&clocks_mutex); - } - s3c2442_clk_cam.parent = clock_h; s3c2442_clk_cam_upll.parent = clock_upll; diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c index 59703c6fb29..06206ceb312 100644 --- a/arch/arm/mach-sa1100/ssp.c +++ b/arch/arm/mach-sa1100/ssp.c @@ -29,9 +29,8 @@ static irqreturn_t ssp_interrupt(int irq, void *dev_id) { unsigned int status = Ser4SSSR; - if (status & SSSR_ROR) { + if (status & SSSR_ROR) printk(KERN_WARNING "SSP: receiver overrun\n"); - } Ser4SSSR = SSSR_ROR; diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index fdf7b016e7a..c2677368d6a 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -14,6 +14,7 @@ #include <linux/irq.h> #include <linux/timex.h> #include <linux/signal.h> +#include <linux/clocksource.h> #include <asm/mach/time.h> #include <asm/hardware.h> @@ -35,23 +36,6 @@ static int sa1100_set_rtc(void) return 0; } -/* IRQs are disabled before entering here from do_gettimeofday() */ -static unsigned long sa1100_gettimeoffset (void) -{ - unsigned long ticks_to_match, elapsed, usec; - - /* Get ticks before next timer match */ - ticks_to_match = OSMR0 - OSCR; - - /* We need elapsed ticks since last match */ - elapsed = LATCH - ticks_to_match; - - /* Now convert them to usec */ - usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH; - - return usec; -} - #ifdef CONFIG_NO_IDLE_HZ static unsigned long initial_match; static int match_posponed; @@ -62,8 +46,6 @@ sa1100_timer_interrupt(int irq, void *dev_id) { unsigned int next_match; - write_seqlock(&xtime_lock); - #ifdef CONFIG_NO_IDLE_HZ if (match_posponed) { match_posponed = 0; @@ -85,8 +67,6 @@ sa1100_timer_interrupt(int irq, void *dev_id) next_match = (OSMR0 += LATCH); } while ((signed long)(next_match - OSCR) <= 0); - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } @@ -96,6 +76,20 @@ static struct irqaction sa1100_timer_irq = { .handler = sa1100_timer_interrupt, }; +static cycle_t sa1100_read_oscr(void) +{ + return OSCR; +} + +static struct clocksource cksrc_sa1100_oscr = { + .name = "oscr", + .rating = 200, + .read = sa1100_read_oscr, + .mask = CLOCKSOURCE_MASK(32), + .shift = 20, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + static void __init sa1100_timer_init(void) { unsigned long flags; @@ -109,6 +103,11 @@ static void __init sa1100_timer_init(void) OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */ OSMR0 = OSCR + LATCH; /* set initial match */ local_irq_restore(flags); + + cksrc_sa1100_oscr.mult = + clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_sa1100_oscr.shift); + + clocksource_register(&cksrc_sa1100_oscr); } #ifdef CONFIG_NO_IDLE_HZ @@ -182,7 +181,6 @@ struct sys_timer sa1100_timer = { .init = sa1100_timer_init, .suspend = sa1100_timer_suspend, .resume = sa1100_timer_resume, - .offset = sa1100_gettimeoffset, #ifdef CONFIG_NO_IDLE_HZ .dyn_tick = &sa1100_dyn_tick, #endif diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index a0545db2a34..09d9f33d407 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -82,9 +82,7 @@ static void __init shark_map_io(void) static irqreturn_t shark_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); timer_tick(); - write_sequnlock(&xtime_lock); return IRQ_HANDLED; } diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 7868f4dc1d0..cb104c2a732 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -171,8 +171,8 @@ config CPU_ARM925T # ARM926T config CPU_ARM926T bool "Support ARM926T processor" - depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI - default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI + depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI + default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI select CPU_32v5 select CPU_ABRT_EV5TJ select CPU_CACHE_VIVT @@ -345,8 +345,9 @@ config CPU_XSC3 # ARMv6 config CPU_V6 bool "Support ARM V6 processor" - depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 + depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM7X00A default y if ARCH_MX3 + default y if ARCH_MSM7X00A select CPU_32v6 select CPU_ABRT_EV6 select CPU_CACHE_V6 diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index a8a7dab757e..28ad7ab1c0c 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -12,6 +12,7 @@ #include <linux/signal.h> #include <linux/mm.h> #include <linux/init.h> +#include <linux/kprobes.h> #include <asm/system.h> #include <asm/pgtable.h> @@ -20,6 +21,29 @@ #include "fault.h" + +#ifdef CONFIG_KPROBES +static inline int notify_page_fault(struct pt_regs *regs, unsigned int fsr) +{ + int ret = 0; + + if (!user_mode(regs)) { + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); + if (kprobe_running() && kprobe_fault_handler(regs, fsr)) + ret = 1; + preempt_enable(); + } + + return ret; +} +#else +static inline int notify_page_fault(struct pt_regs *regs, unsigned int fsr) +{ + return 0; +} +#endif + /* * This is useful to dump out the page tables associated with * 'addr' in mm 'mm'. @@ -215,13 +239,16 @@ out: return fault; } -static int +static int __kprobes do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { struct task_struct *tsk; struct mm_struct *mm; int fault, sig, code; + if (notify_page_fault(regs, fsr)) + return 0; + tsk = current; mm = tsk->mm; @@ -311,7 +338,7 @@ no_context: * interrupt or a critical region, and should only copy the information * from the master page table, nothing more. */ -static int +static int __kprobes do_translation_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index 0360b1f14d1..45a77df668f 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -212,7 +212,7 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox) static irqreturn_t mbox_interrupt(int irq, void *p) { - struct omap_mbox *mbox = (struct omap_mbox *)p; + struct omap_mbox *mbox = p; if (is_mbox_irq(mbox, IRQ_TX)) __mbox_tx_interrupt(mbox); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index f7b9ccdaacb..2af5bd5a134 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -98,9 +98,10 @@ static void omap_mcbsp_dump_reg(u8 id) static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id) { - struct omap_mcbsp * mcbsp_tx = (struct omap_mcbsp *)(dev_id); + struct omap_mcbsp *mcbsp_tx = dev_id; - DBG("TX IRQ callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2)); + DBG("TX IRQ callback : 0x%x\n", + OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2)); complete(&mcbsp_tx->tx_irq_completion); return IRQ_HANDLED; @@ -108,9 +109,10 @@ static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id) static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id) { - struct omap_mcbsp * mcbsp_rx = (struct omap_mcbsp *)(dev_id); + struct omap_mcbsp *mcbsp_rx = dev_id; - DBG("RX IRQ callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2)); + DBG("RX IRQ callback : 0x%x\n", + OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2)); complete(&mcbsp_rx->rx_irq_completion); return IRQ_HANDLED; @@ -118,9 +120,10 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id) static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data) { - struct omap_mcbsp * mcbsp_dma_tx = (struct omap_mcbsp *)(data); + struct omap_mcbsp *mcbsp_dma_tx = data; - DBG("TX DMA callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2)); + DBG("TX DMA callback : 0x%x\n", + OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2)); /* We can free the channels */ omap_free_dma(mcbsp_dma_tx->dma_tx_lch); @@ -131,9 +134,10 @@ static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data) static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data) { - struct omap_mcbsp * mcbsp_dma_rx = (struct omap_mcbsp *)(data); + struct omap_mcbsp *mcbsp_dma_rx = data; - DBG("RX DMA callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2)); + DBG("RX DMA callback : 0x%x\n", + OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2)); /* We can free the channels */ omap_free_dma(mcbsp_dma_rx->dma_rx_lch); diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 8e5ccaa1f03..131d20237dd 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -23,6 +23,7 @@ obj-y += clock.o obj-$(CONFIG_CPU_S3C244X) += s3c244x.o obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += sleep.o diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c index 79cda0faec8..99a44746f8f 100644 --- a/arch/arm/plat-s3c24xx/clock.c +++ b/arch/arm/plat-s3c24xx/clock.c @@ -172,6 +172,15 @@ int clk_set_rate(struct clk *clk, unsigned long rate) if (IS_ERR(clk)) return -EINVAL; + /* We do not default just do a clk->rate = rate as + * the clock may have been made this way by choice. + */ + + WARN_ON(clk->set_rate == NULL); + + if (clk->set_rate == NULL) + return -EINVAL; + mutex_lock(&clocks_mutex); ret = (clk->set_rate)(clk, rate); mutex_unlock(&clocks_mutex); @@ -213,6 +222,12 @@ EXPORT_SYMBOL(clk_set_parent); /* base clocks */ +static int clk_default_setrate(struct clk *clk, unsigned long rate) +{ + clk->rate = rate; + return 0; +} + struct clk clk_xtal = { .name = "xtal", .id = -1, @@ -224,6 +239,7 @@ struct clk clk_xtal = { struct clk clk_mpll = { .name = "mpll", .id = -1, + .set_rate = clk_default_setrate, }; struct clk clk_upll = { @@ -239,6 +255,7 @@ struct clk clk_f = { .rate = 0, .parent = &clk_mpll, .ctrlbit = 0, + .set_rate = clk_default_setrate, }; struct clk clk_h = { @@ -247,6 +264,7 @@ struct clk clk_h = { .rate = 0, .parent = NULL, .ctrlbit = 0, + .set_rate = clk_default_setrate, }; struct clk clk_p = { @@ -255,6 +273,7 @@ struct clk clk_p = { .rate = 0, .parent = NULL, .ctrlbit = 0, + .set_rate = clk_default_setrate, }; struct clk clk_usb_bus = { diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index aae1b9cbaf4..ac9ff1666fc 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -525,7 +525,8 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, } } else if (chan->state == S3C2410_DMA_IDLE) { if (chan->flags & S3C2410_DMAF_AUTOSTART) { - s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_START); + s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL, + S3C2410_DMAOP_START); } } @@ -787,7 +788,7 @@ int s3c2410_dma_request(unsigned int channel, pr_debug("%s: channel initialised, %p\n", __FUNCTION__, chan); - return 0; + return chan->number | DMACH_LOW_LEVEL; } EXPORT_SYMBOL(s3c2410_dma_request); @@ -1173,6 +1174,7 @@ int s3c2410_dma_devconfig(int channel, chan->source = source; chan->dev_addr = devaddr; + chan->hw_cfg = hwcfg; switch (source) { case S3C2410_DMASRC_HW: @@ -1184,7 +1186,7 @@ int s3c2410_dma_devconfig(int channel, dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0)); chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST); - return 0; + break; case S3C2410_DMASRC_MEM: /* source is memory */ @@ -1195,11 +1197,19 @@ int s3c2410_dma_devconfig(int channel, dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3); chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC); - return 0; + break; + + default: + printk(KERN_ERR "dma%d: invalid source type (%d)\n", + channel, source); + + return -EINVAL; } - printk(KERN_ERR "dma%d: invalid source type (%d)\n", channel, source); - return -EINVAL; + if (dma_sel.direction != NULL) + (dma_sel.direction)(chan, chan->map, source); + + return 0; } EXPORT_SYMBOL(s3c2410_dma_devconfig); @@ -1227,6 +1237,10 @@ int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst) EXPORT_SYMBOL(s3c2410_dma_getposition); +static struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev) +{ + return container_of(dev, struct s3c2410_dma_chan, dev); +} /* system device class */ @@ -1234,7 +1248,7 @@ EXPORT_SYMBOL(s3c2410_dma_getposition); static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state) { - struct s3c2410_dma_chan *cp = container_of(dev, struct s3c2410_dma_chan, dev); + struct s3c2410_dma_chan *cp = to_dma_chan(dev); printk(KERN_DEBUG "suspending dma channel %d\n", cp->number); @@ -1256,6 +1270,24 @@ static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state) static int s3c2410_dma_resume(struct sys_device *dev) { + struct s3c2410_dma_chan *cp = to_dma_chan(dev); + unsigned int no = cp->number | DMACH_LOW_LEVEL; + + /* restore channel's hardware configuration */ + + if (!cp->in_use) + return 0; + + printk(KERN_INFO "dma%d: restoring configuration\n", cp->number); + + s3c2410_dma_config(no, cp->xfer_unit, cp->dcon); + s3c2410_dma_devconfig(no, cp->source, cp->hw_cfg, cp->dev_addr); + + /* re-select the dma source for this channel */ + + if (cp->map != NULL) + dma_sel.select(cp, cp->map); + return 0; } @@ -1445,6 +1477,7 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel) found: dmach = &s3c2410_chans[ch]; + dmach->map = ch_map; dma_chan_map[channel] = dmach; /* select the channel */ diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c index ec3a09c4d18..ee99dcc7f0b 100644 --- a/arch/arm/plat-s3c24xx/gpio.c +++ b/arch/arm/plat-s3c24xx/gpio.c @@ -122,6 +122,19 @@ void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) EXPORT_SYMBOL(s3c2410_gpio_pullup); +int s3c2410_gpio_getpull(unsigned int pin) +{ + void __iomem *base = S3C24XX_GPIO_BASE(pin); + unsigned long offs = S3C2410_GPIO_OFFSET(pin); + + if (pin < S3C2410_GPIO_BANKB) + return -EINVAL; + + return (__raw_readl(base + 0x08) & (1L << offs)) ? 1 : 0; +} + +EXPORT_SYMBOL(s3c2410_gpio_getpull); + void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) { void __iomem *base = S3C24XX_GPIO_BASE(pin); @@ -186,3 +199,19 @@ int s3c2410_gpio_getirq(unsigned int pin) } EXPORT_SYMBOL(s3c2410_gpio_getirq); + +int s3c2410_gpio_irq2pin(unsigned int irq) +{ + if (irq >= IRQ_EINT0 && irq <= IRQ_EINT3) + return S3C2410_GPF0 + (irq - IRQ_EINT0); + + if (irq >= IRQ_EINT4 && irq <= IRQ_EINT7) + return S3C2410_GPF4 + (irq - IRQ_EINT4); + + if (irq >= IRQ_EINT8 && irq <= IRQ_EINT23) + return S3C2410_GPG0 + (irq - IRQ_EINT8); + + return -EINVAL; +} + +EXPORT_SYMBOL(s3c2410_gpio_irq2pin); diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index 8fbc8847026..d486f511256 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -187,7 +187,7 @@ struct irq_chip s3c_irq_level_chip = { .set_wake = s3c_irq_wake }; -static struct irq_chip s3c_irq_chip = { +struct irq_chip s3c_irq_chip = { .name = "s3c", .ack = s3c_irq_ack, .mask = s3c_irq_mask, diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index 4fdb3117744..bf5581a9aee 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -83,38 +83,39 @@ static struct sleep_save core_save[] = { SAVE_ITEM(S3C2410_REFRESH), }; -static struct sleep_save gpio_save[] = { - SAVE_ITEM(S3C2410_GPACON), - SAVE_ITEM(S3C2410_GPADAT), - - SAVE_ITEM(S3C2410_GPBCON), - SAVE_ITEM(S3C2410_GPBDAT), - SAVE_ITEM(S3C2410_GPBUP), - - SAVE_ITEM(S3C2410_GPCCON), - SAVE_ITEM(S3C2410_GPCDAT), - SAVE_ITEM(S3C2410_GPCUP), - - SAVE_ITEM(S3C2410_GPDCON), - SAVE_ITEM(S3C2410_GPDDAT), - SAVE_ITEM(S3C2410_GPDUP), - - SAVE_ITEM(S3C2410_GPECON), - SAVE_ITEM(S3C2410_GPEDAT), - SAVE_ITEM(S3C2410_GPEUP), - - SAVE_ITEM(S3C2410_GPFCON), - SAVE_ITEM(S3C2410_GPFDAT), - SAVE_ITEM(S3C2410_GPFUP), - - SAVE_ITEM(S3C2410_GPGCON), - SAVE_ITEM(S3C2410_GPGDAT), - SAVE_ITEM(S3C2410_GPGUP), - - SAVE_ITEM(S3C2410_GPHCON), - SAVE_ITEM(S3C2410_GPHDAT), - SAVE_ITEM(S3C2410_GPHUP), +static struct gpio_sleep { + void __iomem *base; + unsigned int gpcon; + unsigned int gpdat; + unsigned int gpup; +} gpio_save[] = { + [0] = { + .base = S3C2410_GPACON, + }, + [1] = { + .base = S3C2410_GPBCON, + }, + [2] = { + .base = S3C2410_GPCCON, + }, + [3] = { + .base = S3C2410_GPDCON, + }, + [4] = { + .base = S3C2410_GPECON, + }, + [5] = { + .base = S3C2410_GPFCON, + }, + [6] = { + .base = S3C2410_GPGCON, + }, + [7] = { + .base = S3C2410_GPHCON, + }, +}; +static struct sleep_save misc_save[] = { SAVE_ITEM(S3C2410_DCLKCON), }; @@ -486,6 +487,184 @@ static void s3c2410_pm_configure_extint(void) } } +/* offsets for CON/DAT/UP registers */ + +#define OFFS_CON (S3C2410_GPACON - S3C2410_GPACON) +#define OFFS_DAT (S3C2410_GPADAT - S3C2410_GPACON) +#define OFFS_UP (S3C2410_GPBUP - S3C2410_GPBCON) + +/* s3c2410_pm_save_gpios() + * + * Save the state of the GPIOs + */ + +static void s3c2410_pm_save_gpios(void) +{ + struct gpio_sleep *gps = gpio_save; + unsigned int gpio; + + for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) { + void __iomem *base = gps->base; + + gps->gpcon = __raw_readl(base + OFFS_CON); + gps->gpdat = __raw_readl(base + OFFS_DAT); + + if (gpio > 0) + gps->gpup = __raw_readl(base + OFFS_UP); + + } +} + +/* Test whether the given masked+shifted bits of an GPIO configuration + * are one of the SFN (special function) modes. */ + +static inline int is_sfn(unsigned long con) +{ + return (con == 2 || con == 3); +} + +/* Test if the given masked+shifted GPIO configuration is an input */ + +static inline int is_in(unsigned long con) +{ + return con == 0; +} + +/* Test if the given masked+shifted GPIO configuration is an output */ + +static inline int is_out(unsigned long con) +{ + return con == 1; +} + +/* s3c2410_pm_restore_gpio() + * + * Restore one of the GPIO banks that was saved during suspend. This is + * not as simple as once thought, due to the possibility of glitches + * from the order that the CON and DAT registers are set in. + * + * The three states the pin can be are {IN,OUT,SFN} which gives us 9 + * combinations of changes to check. Three of these, if the pin stays + * in the same configuration can be discounted. This leaves us with + * the following: + * + * { IN => OUT } Change DAT first + * { IN => SFN } Change CON first + * { OUT => SFN } Change CON first, so new data will not glitch + * { OUT => IN } Change CON first, so new data will not glitch + * { SFN => IN } Change CON first + * { SFN => OUT } Change DAT first, so new data will not glitch [1] + * + * We do not currently deal with the UP registers as these control + * weak resistors, so a small delay in change should not need to bring + * these into the calculations. + * + * [1] this assumes that writing to a pin DAT whilst in SFN will set the + * state for when it is next output. + */ + +static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps) +{ + void __iomem *base = gps->base; + unsigned long gps_gpcon = gps->gpcon; + unsigned long gps_gpdat = gps->gpdat; + unsigned long old_gpcon; + unsigned long old_gpdat; + unsigned long old_gpup = 0x0; + unsigned long gpcon; + int nr; + + old_gpcon = __raw_readl(base + OFFS_CON); + old_gpdat = __raw_readl(base + OFFS_DAT); + + if (base == S3C2410_GPACON) { + /* GPACON only has one bit per control / data and no PULLUPs. + * GPACON[x] = 0 => Output, 1 => SFN */ + + /* first set all SFN bits to SFN */ + + gpcon = old_gpcon | gps->gpcon; + __raw_writel(gpcon, base + OFFS_CON); + + /* now set all the other bits */ + + __raw_writel(gps_gpdat, base + OFFS_DAT); + __raw_writel(gps_gpcon, base + OFFS_CON); + } else { + unsigned long old, new, mask; + unsigned long change_mask = 0x0; + + old_gpup = __raw_readl(base + OFFS_UP); + + /* Create a change_mask of all the items that need to have + * their CON value changed before their DAT value, so that + * we minimise the work between the two settings. + */ + + for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) { + old = (old_gpcon & mask) >> nr; + new = (gps_gpcon & mask) >> nr; + + /* If there is no change, then skip */ + + if (old == new) + continue; + + /* If both are special function, then skip */ + + if (is_sfn(old) && is_sfn(new)) + continue; + + /* Change is IN => OUT, do not change now */ + + if (is_in(old) && is_out(new)) + continue; + + /* Change is SFN => OUT, do not change now */ + + if (is_sfn(old) && is_out(new)) + continue; + + /* We should now be at the case of IN=>SFN, + * OUT=>SFN, OUT=>IN, SFN=>IN. */ + + change_mask |= mask; + } + + /* Write the new CON settings */ + + gpcon = old_gpcon & ~change_mask; + gpcon |= gps_gpcon & change_mask; + + __raw_writel(gpcon, base + OFFS_CON); + + /* Now change any items that require DAT,CON */ + + __raw_writel(gps_gpdat, base + OFFS_DAT); + __raw_writel(gps_gpcon, base + OFFS_CON); + __raw_writel(gps->gpup, base + OFFS_UP); + } + + DBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n", + index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); +} + + +/** s3c2410_pm_restore_gpios() + * + * Restore the state of the GPIOs + */ + +static void s3c2410_pm_restore_gpios(void) +{ + struct gpio_sleep *gps = gpio_save; + int gpio; + + for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) { + s3c2410_pm_restore_gpio(gpio, gps); + } +} + void (*pm_cpu_prep)(void); void (*pm_cpu_sleep)(void); @@ -535,7 +714,8 @@ static int s3c2410_pm_enter(suspend_state_t state) /* save all necessary core registers not covered by the drivers */ - s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save)); + s3c2410_pm_save_gpios(); + s3c2410_pm_do_save(misc_save, ARRAY_SIZE(misc_save)); s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save)); s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save)); @@ -585,8 +765,9 @@ static int s3c2410_pm_enter(suspend_state_t state) /* restore the system state */ s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); - s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save)); + s3c2410_pm_do_restore(misc_save, ARRAY_SIZE(misc_save)); s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save)); + s3c2410_pm_restore_gpios(); s3c2410_pm_debug_init(); diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c new file mode 100644 index 00000000000..faf3e0f9f4e --- /dev/null +++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c @@ -0,0 +1,137 @@ +/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c + * + * Copyright (c) 2004-2005,2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2440/S3C2442 Common clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/device.h> +#include <linux/sysdev.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/mutex.h> +#include <linux/clk.h> + +#include <asm/hardware.h> +#include <asm/atomic.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include <asm/arch/regs-clock.h> + +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/cpu.h> + +static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent) +{ + unsigned long camdivn; + unsigned long dvs; + + if (parent == &clk_f) + dvs = 0; + else if (parent == &clk_h) + dvs = S3C2440_CAMDIVN_DVSEN; + else + return -EINVAL; + + clk->parent = parent; + + camdivn = __raw_readl(S3C2440_CAMDIVN); + camdivn &= ~S3C2440_CAMDIVN_DVSEN; + camdivn |= dvs; + __raw_writel(camdivn, S3C2440_CAMDIVN); + + return 0; +} + +static struct clk clk_arm = { + .name = "armclk", + .id = -1, + .set_parent = s3c2440_setparent_armclk, +}; + +static int s3c244x_clk_add(struct sys_device *sysdev) +{ + unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); + unsigned long clkdivn; + struct clk *clock_upll; + int ret; + + printk("S3C244X: Clock Support, DVS %s\n", + (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); + + clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f; + + ret = s3c24xx_register_clock(&clk_arm); + if (ret < 0) { + printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret); + return ret; + } + + clock_upll = clk_get(NULL, "upll"); + if (IS_ERR(clock_upll)) { + printk(KERN_ERR "S3C244X: Failed to get upll clock\n"); + return -ENOENT; + } + + /* check rate of UPLL, and if it is near 96MHz, then change + * to using half the UPLL rate for the system */ + + if (clk_get_rate(clock_upll) > (94 * MHZ)) { + clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; + + mutex_lock(&clocks_mutex); + + clkdivn = __raw_readl(S3C2410_CLKDIVN); + clkdivn |= S3C2440_CLKDIVN_UCLK; + __raw_writel(clkdivn, S3C2410_CLKDIVN); + + mutex_unlock(&clocks_mutex); + } + + return 0; +} + +static struct sysdev_driver s3c2440_clk_driver = { + .add = s3c244x_clk_add, +}; + +static int s3c2440_clk_init(void) +{ + return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver); +} + +arch_initcall(s3c2440_clk_init); + +static struct sysdev_driver s3c2442_clk_driver = { + .add = s3c244x_clk_add, +}; + +static int s3c2442_clk_init(void) +{ + return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver); +} + +arch_initcall(s3c2442_clk_init); diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 0a9a5e7f62e..7ed58c0c24c 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Fri May 11 19:53:41 2007 +# Last update: Sat Jan 26 14:45:34 2008 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -266,7 +266,7 @@ stork_egg ARCH_STORK_EGG STORK_EGG 248 wismo SA1100_WISMO WISMO 249 ezlinx ARCH_EZLINX EZLINX 250 at91rm9200 ARCH_AT91RM9200 AT91RM9200 251 -orion ARCH_ORION ORION 252 +adtech_orion ARCH_ADTECH_ORION ADTECH_ORION 252 neptune ARCH_NEPTUNE NEPTUNE 253 hackkit SA1100_HACKKIT HACKKIT 254 pxa_wins30 ARCH_PXA_WINS30 PXA_WINS30 255 @@ -661,7 +661,6 @@ a9200ec MACH_A9200EC A9200EC 645 pnx0105 MACH_PNX0105 PNX0105 646 adcpoecpu MACH_ADCPOECPU ADCPOECPU 647 csb637 MACH_CSB637 CSB637 648 -ml69q6203 MACH_ML69Q6203 ML69Q6203 649 mb9200 MACH_MB9200 MB9200 650 kulun MACH_KULUN KULUN 651 snapper MACH_SNAPPER SNAPPER 652 @@ -953,7 +952,6 @@ fred_jack MACH_FRED_JACK FRED_JACK 939 ttg_color1 MACH_TTG_COLOR1 TTG_COLOR1 940 nxeb500hmi MACH_NXEB500HMI NXEB500HMI 941 netdcu8 MACH_NETDCU8 NETDCU8 942 -ml675050_cpu_boa MACH_ML675050_CPU_BOA ML675050_CPU_BOA 943 ng_fvx538 MACH_NG_FVX538 NG_FVX538 944 ng_fvs338 MACH_NG_FVS338 NG_FVS338 945 pnx4103 MACH_PNX4103 PNX4103 946 @@ -1148,7 +1146,7 @@ aidx270 MACH_AIDX270 AIDX270 1134 rema MACH_REMA REMA 1135 bps1000 MACH_BPS1000 BPS1000 1136 hw90350 MACH_HW90350 HW90350 1137 -omap_sdp3430 MACH_OMAP_SDP3430 OMAP_SDP3430 1138 +omap_3430sdp MACH_OMAP_3430SDP OMAP_3430SDP 1138 bluetouch MACH_BLUETOUCH BLUETOUCH 1139 vstms MACH_VSTMS VSTMS 1140 xsbase270 MACH_XSBASE270 XSBASE270 1141 @@ -1214,7 +1212,7 @@ osstbox MACH_OSSTBOX OSSTBOX 1203 kbat9261 MACH_KBAT9261 KBAT9261 1204 ct1100 MACH_CT1100 CT1100 1205 akcppxa MACH_AKCPPXA AKCPPXA 1206 -zevio_1020 MACH_ZEVIO_1020 ZEVIO_1020 1207 +ochaya1020 MACH_OCHAYA1020 OCHAYA1020 1207 hitrack MACH_HITRACK HITRACK 1208 syme1 MACH_SYME1 SYME1 1209 syhl1 MACH_SYHL1 SYHL1 1210 @@ -1299,7 +1297,7 @@ xp179 MACH_XP179 XP179 1290 h4300 MACH_H4300 H4300 1291 goramo_mlr MACH_GORAMO_MLR GORAMO_MLR 1292 mxc30020evb MACH_MXC30020EVB MXC30020EVB 1293 -adsbitsymx MACH_ADSBITSIMX ADSBITSIMX 1294 +adsbitsyg5 MACH_ADSBITSYG5 ADSBITSYG5 1294 adsportalplus MACH_ADSPORTALPLUS ADSPORTALPLUS 1295 mmsp2plus MACH_MMSP2PLUS MMSP2PLUS 1296 em_x270 MACH_EM_X270 EM_X270 1297 @@ -1367,3 +1365,249 @@ db88f5281 MACH_DB88F5281 DB88F5281 1358 csb726 MACH_CSB726 CSB726 1359 tik27 MACH_TIK27 TIK27 1360 mx_uc7420 MACH_MX_UC7420 MX_UC7420 1361 +rirm3 MACH_RIRM3 RIRM3 1362 +pelco_odyssey MACH_PELCO_ODYSSEY PELCO_ODYSSEY 1363 +adx_abox MACH_ADX_ABOX ADX_ABOX 1365 +adx_tpid MACH_ADX_TPID ADX_TPID 1366 +minicheck MACH_MINICHECK MINICHECK 1367 +idam MACH_IDAM IDAM 1368 +mario_mx MACH_MARIO_MX MARIO_MX 1369 +vi1888 MACH_VI1888 VI1888 1370 +zr4230 MACH_ZR4230 ZR4230 1371 +t1_ix_blue MACH_T1_IX_BLUE T1_IX_BLUE 1372 +syhq2 MACH_SYHQ2 SYHQ2 1373 +computime_r3 MACH_COMPUTIME_R3 COMPUTIME_R3 1374 +oratis MACH_ORATIS ORATIS 1375 +mikko MACH_MIKKO MIKKO 1376 +holon MACH_HOLON HOLON 1377 +olip8 MACH_OLIP8 OLIP8 1378 +ghi270hg MACH_GHI270HG GHI270HG 1379 +davinci_dm6467_evm MACH_DAVINCI_DM6467_EVM DAVINCI_DM6467_EVM 1380 +davinci_dm355_evm MACH_DAVINCI_DM350_EVM DAVINCI_DM350_EVM 1381 +blackriver MACH_BLACKRIVER BLACKRIVER 1383 +sandgate_wp MACH_SANDGATEWP SANDGATEWP 1384 +cdotbwsg MACH_CDOTBWSG CDOTBWSG 1385 +quark963 MACH_QUARK963 QUARK963 1386 +csb735 MACH_CSB735 CSB735 1387 +littleton MACH_LITTLETON LITTLETON 1388 +mio_p550 MACH_MIO_P550 MIO_P550 1389 +motion2440 MACH_MOTION2440 MOTION2440 1390 +imm500 MACH_IMM500 IMM500 1391 +homematic MACH_HOMEMATIC HOMEMATIC 1392 +ermine MACH_ERMINE ERMINE 1393 +kb9202b MACH_KB9202B KB9202B 1394 +hs1xx MACH_HS1XX HS1XX 1395 +studentmate2440 MACH_STUDENTMATE2440 STUDENTMATE2440 1396 +arvoo_l1_z1 MACH_ARVOO_L1_Z1 ARVOO_L1_Z1 1397 +dep2410k MACH_DEP2410K DEP2410K 1398 +xxsvideo MACH_XXSVIDEO XXSVIDEO 1399 +im4004 MACH_IM4004 IM4004 1400 +ochaya1050 MACH_OCHAYA1050 OCHAYA1050 1401 +lep9261 MACH_LEP9261 LEP9261 1402 +svenmeb MACH_SVENMEB SVENMEB 1403 +fortunet2ne MACH_FORTUNET2NE FORTUNET2NE 1404 +nxhx MACH_NXHX NXHX 1406 +realview_pb11mp MACH_REALVIEW_PB11MP REALVIEW_PB11MP 1407 +ids500 MACH_IDS500 IDS500 1408 +ors_n725 MACH_ORS_N725 ORS_N725 1409 +hsdarm MACH_HSDARM HSDARM 1410 +sha_pon003 MACH_SHA_PON003 SHA_PON003 1411 +sha_pon004 MACH_SHA_PON004 SHA_PON004 1412 +sha_pon007 MACH_SHA_PON007 SHA_PON007 1413 +sha_pon011 MACH_SHA_PON011 SHA_PON011 1414 +h6042 MACH_H6042 H6042 1415 +h6043 MACH_H6043 H6043 1416 +looxc550 MACH_LOOXC550 LOOXC550 1417 +cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418 +app3xx MACH_APP3XX APP3XX 1419 +sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420 +xscale_palmt700p MACH_XSCALE_PALMT700P XSCALE_PALMT700P 1421 +xscale_palmt700w MACH_XSCALE_PALMT700W XSCALE_PALMT700W 1422 +xscale_palmt750 MACH_XSCALE_PALMT750 XSCALE_PALMT750 1423 +xscale_palmt755p MACH_XSCALE_PALMT755P XSCALE_PALMT755P 1424 +ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425 +sarge MACH_SARGE SARGE 1426 +a696 MACH_A696 A696 1427 +turtle1916 MACH_TURTLE TURTLE 1428 +mx27_3ds MACH_MX27_3DS MX27_3DS 1430 +bishop MACH_BISHOP BISHOP 1431 +pxx MACH_PXX PXX 1432 +redwood MACH_REDWOOD REDWOOD 1433 +omap_2430dlp MACH_OMAP_2430DLP OMAP_2430DLP 1436 +omap_2430osk MACH_OMAP_2430OSK OMAP_2430OSK 1437 +sardine MACH_SARDINE SARDINE 1438 +halibut MACH_HALIBUT HALIBUT 1439 +trout MACH_TROUT TROUT 1440 +goldfish MACH_GOLDFISH GOLDFISH 1441 +gesbc2440 MACH_GESBC2440 GESBC2440 1442 +nomad MACH_NOMAD NOMAD 1443 +rosalind MACH_ROSALIND ROSALIND 1444 +cc9p9215 MACH_CC9P9215 CC9P9215 1445 +cc9p9210 MACH_CC9P9210 CC9P9210 1446 +cc9p9215js MACH_CC9P9215JS CC9P9215JS 1447 +cc9p9210js MACH_CC9P9210JS CC9P9210JS 1448 +nasffe MACH_NASFFE NASFFE 1449 +tn2x0bd MACH_TN2X0BD TN2X0BD 1450 +gwmpxa MACH_GWMPXA GWMPXA 1451 +exyplus MACH_EXYPLUS EXYPLUS 1452 +jadoo21 MACH_JADOO21 JADOO21 1453 +looxn560 MACH_LOOXN560 LOOXN560 1454 +bonsai MACH_BONSAI BONSAI 1455 +adsmilgato MACH_ADSMILGATO ADSMILGATO 1456 +gba MACH_GBA GBA 1457 +h6044 MACH_H6044 H6044 1458 +app MACH_APP APP 1459 +tct_hammer MACH_TCT_HAMMER TCT_HAMMER 1460 +herald MACH_HERMES HERMES 1461 +artemis MACH_ARTEMIS ARTEMIS 1462 +htctitan MACH_HTCTITAN HTCTITAN 1463 +qranium MACH_QRANIUM QRANIUM 1464 +adx_wsc2 MACH_ADX_WSC2 ADX_WSC2 1465 +adx_medinet MACH_ADX_MEDINET ADX_MEDINET 1466 +bboard MACH_BBOARD BBOARD 1467 +cambria MACH_CAMBRIA CAMBRIA 1468 +mt7xxx MACH_MT7XXX MT7XXX 1469 +matrix512 MACH_MATRIX512 MATRIX512 1470 +matrix522 MACH_MATRIX522 MATRIX522 1471 +ipac5010 MACH_IPAC5010 IPAC5010 1472 +sakura MACH_SAKURA SAKURA 1473 +grocx MACH_GROCX GROCX 1474 +pm9263 MACH_PM9263 PM9263 1475 +sim_one MACH_SIM_ONE SIM_ONE 1476 +acq132 MACH_ACQ132 ACQ132 1477 +datr MACH_DATR DATR 1478 +actux1 MACH_ACTUX1 ACTUX1 1479 +actux2 MACH_ACTUX2 ACTUX2 1480 +actux3 MACH_ACTUX3 ACTUX3 1481 +flexit MACH_FLEXIT FLEXIT 1482 +bh2x0bd MACH_BH2X0BD BH2X0BD 1483 +atb2002 MACH_ATB2002 ATB2002 1484 +xenon MACH_XENON XENON 1485 +fm607 MACH_FM607 FM607 1486 +matrix514 MACH_MATRIX514 MATRIX514 1487 +matrix524 MACH_MATRIX524 MATRIX524 1488 +inpod MACH_INPOD INPOD 1489 +jive MACH_JIVE JIVE 1490 +tll_mx21 MACH_TLL_MX21 TLL_MX21 1491 +sbc2800 MACH_SBC2800 SBC2800 1492 +cc7ucamry MACH_CC7UCAMRY CC7UCAMRY 1493 +ubisys_p9_sc15 MACH_UBISYS_P9_SC15 UBISYS_P9_SC15 1494 +ubisys_p9_ssc2d10 MACH_UBISYS_P9_SSC2D10 UBISYS_P9_SSC2D10 1495 +ubisys_p9_rcu3 MACH_UBISYS_P9_RCU3 UBISYS_P9_RCU3 1496 +aml_m8000 MACH_AML_M8000 AML_M8000 1497 +snapper_270 MACH_SNAPPER_270 SNAPPER_270 1498 +omap_bbx MACH_OMAP_BBX OMAP_BBX 1499 +ucn2410 MACH_UCN2410 UCN2410 1500 +sam9_l9260 MACH_SAM9_L9260 SAM9_L9260 1501 +eti_c2 MACH_ETI_C2 ETI_C2 1502 +avalanche MACH_AVALANCHE AVALANCHE 1503 +realview_pb1176 MACH_REALVIEW_PB1176 REALVIEW_PB1176 1504 +dp1500 MACH_DP1500 DP1500 1505 +apple_iphone MACH_APPLE_IPHONE APPLE_IPHONE 1506 +yl9200 MACH_YL9200 YL9200 1507 +rd88f5182 MACH_RD88F5182 RD88F5182 1508 +kurobox_pro MACH_KUROBOX_PRO KUROBOX_PRO 1509 +se_poet MACH_SE_POET SE_POET 1510 +mx31_3ds MACH_MX31_3DS MX31_3DS 1511 +r270 MACH_R270 R270 1512 +armour21 MACH_ARMOUR21 ARMOUR21 1513 +dt2 MACH_DT2 DT2 1514 +vt4 MACH_VT4 VT4 1515 +tyco320 MACH_TYCO320 TYCO320 1516 +adma MACH_ADMA ADMA 1517 +wp188 MACH_WP188 WP188 1518 +corsica MACH_CORSICA CORSICA 1519 +bigeye MACH_BIGEYE BIGEYE 1520 +tll5000 MACH_TLL5000 TLL5000 1522 +hni270 MACH_HNI_X270 HNI_X270 1523 +qong MACH_QONG QONG 1524 +tcompact MACH_TCOMPACT TCOMPACT 1525 +puma5 MACH_PUMA5 PUMA5 1526 +elara MACH_ELARA ELARA 1527 +ellington MACH_ELLINGTON ELLINGTON 1528 +xda_atom MACH_XDA_ATOM XDA_ATOM 1529 +energizer2 MACH_ENERGIZER2 ENERGIZER2 1530 +odin MACH_ODIN ODIN 1531 +actux4 MACH_ACTUX4 ACTUX4 1532 +esl_omap MACH_ESL_OMAP ESL_OMAP 1533 +omap2evm MACH_OMAP2EVM OMAP2EVM 1534 +omap3evm MACH_OMAP3EVM OMAP3EVM 1535 +adx_pcu57 MACH_ADX_PCU57 ADX_PCU57 1536 +monaco MACH_MONACO MONACO 1537 +levante MACH_LEVANTE LEVANTE 1538 +tmxipx425 MACH_TMXIPX425 TMXIPX425 1539 +leep MACH_LEEP LEEP 1540 +raad MACH_RAAD RAAD 1541 +dns323 MACH_DNS323 DNS323 1542 +ap1000 MACH_AP1000 AP1000 1543 +a9sam6432 MACH_A9SAM6432 A9SAM6432 1544 +shiny MACH_SHINY SHINY 1545 +omap3_beagle MACH_OMAP3_BEAGLE OMAP3_BEAGLE 1546 +csr_bdb2 MACH_CSR_BDB2 CSR_BDB2 1547 +nokia_n810 MACH_NOKIA_N810 NOKIA_N810 1548 +c270 MACH_C270 C270 1549 +sentry MACH_SENTRY SENTRY 1550 +pcm038 MACH_PCM038 PCM038 1551 +anc300 MACH_ANC300 ANC300 1552 +htckaiser MACH_HTCKAISER HTCKAISER 1553 +sbat100 MACH_SBAT100 SBAT100 1554 +modunorm MACH_MODUNORM MODUNORM 1555 +pelos_twarm MACH_PELOS_TWARM PELOS_TWARM 1556 +flank MACH_FLANK FLANK 1557 +sirloin MACH_SIRLOIN SIRLOIN 1558 +brisket MACH_BRISKET BRISKET 1559 +chuck MACH_CHUCK CHUCK 1560 +otter MACH_OTTER OTTER 1561 +davinci_ldk MACH_DAVINCI_LDK DAVINCI_LDK 1562 +phreedom MACH_PHREEDOM PHREEDOM 1563 +sg310 MACH_SG310 SG310 1564 +ts_x09 MACH_TS209 TS209 1565 +at91cap9adk MACH_AT91CAP9ADK AT91CAP9ADK 1566 +tion9315 MACH_TION9315 TION9315 1567 +mast MACH_MAST MAST 1568 +pfw MACH_PFW PFW 1569 +yl_p2440 MACH_YL_P2440 YL_P2440 1570 +zsbc32 MACH_ZSBC32 ZSBC32 1571 +omap_pace2 MACH_OMAP_PACE2 OMAP_PACE2 1572 +imx_pace2 MACH_IMX_PACE2 IMX_PACE2 1573 +mx31moboard MACH_MX31MOBOARD MX31MOBOARD 1574 +mx37_3ds MACH_MX37_3DS MX37_3DS 1575 +rcc MACH_RCC RCC 1576 +dmp MACH_ARM9 ARM9 1577 +vision_ep9307 MACH_VISION_EP9307 VISION_EP9307 1578 +scly1000 MACH_SCLY1000 SCLY1000 1579 +fontel_ep MACH_FONTEL_EP FONTEL_EP 1580 +voiceblue3g MACH_VOICEBLUE3G VOICEBLUE3G 1581 +tt9200 MACH_TT9200 TT9200 1582 +digi2410 MACH_DIGI2410 DIGI2410 1583 +terastation_pro2 MACH_TERASTATION_PRO2 TERASTATION_PRO2 1584 +linkstation_pro MACH_LINKSTATION_PRO LINKSTATION_PRO 1585 +motorola_a780 MACH_MOTOROLA_A780 MOTOROLA_A780 1587 +motorola_e6 MACH_MOTOROLA_E6 MOTOROLA_E6 1588 +motorola_e2 MACH_MOTOROLA_E2 MOTOROLA_E2 1589 +motorola_e680 MACH_MOTOROLA_E680 MOTOROLA_E680 1590 +ur2410 MACH_UR2410 UR2410 1591 +tas9261 MACH_TAS9261 TAS9261 1592 +davinci_hermes_hd MACH_HERMES_HD HERMES_HD 1593 +davinci_perseo_hd MACH_PERSEO_HD PERSEO_HD 1594 +stargazer2 MACH_STARGAZER2 STARGAZER2 1595 +e350 MACH_E350 E350 1596 +wpcm450 MACH_WPCM450 WPCM450 1597 +cartesio MACH_CARTESIO CARTESIO 1598 +toybox MACH_TOYBOX TOYBOX 1599 +tx27 MACH_TX27 TX27 1600 +ts409 MACH_TS409 TS409 1601 +p300 MACH_P300 P300 1602 +xdacomet MACH_XDACOMET XDACOMET 1603 +dexflex2 MACH_DEXFLEX2 DEXFLEX2 1604 +ow MACH_OW OW 1605 +armebs3 MACH_ARMEBS3 ARMEBS3 1606 +u3 MACH_U3 U3 1607 +smdk2450 MACH_SMDK2450 SMDK2450 1608 +rsi_ews MACH_RSI_EWS RSI_EWS 1609 +tnb MACH_TNB TNB 1610 +toepath MACH_TOEPATH TOEPATH 1611 +kb9263 MACH_KB9263 KB9263 1612 +mt7108 MACH_MT7108 MT7108 1613 +smtr2440 MACH_SMTR2440 SMTR2440 1614 +manao MACH_MANAO MANAO 1615 diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h index 791d0238c68..c85860bad58 100644 --- a/arch/arm/vfp/vfp.h +++ b/arch/arm/vfp/vfp.h @@ -265,7 +265,11 @@ struct vfp_double { * which returns (double)0.0. This is useful for the compare with * zero instructions. */ +#ifdef CONFIG_VFPv3 +#define VFP_REG_ZERO 32 +#else #define VFP_REG_ZERO 16 +#endif extern u64 vfp_get_double(unsigned int reg); extern void vfp_put_double(u64 val, unsigned int reg); diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index 0ac022f800a..353f9e5c791 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -99,12 +99,12 @@ vfp_support_entry: DBGSTR1 "save old state %p", r4 cmp r4, #0 beq no_old_VFP_process + VFPFSTMIA r4, r5 @ save the working registers VFPFMRX r5, FPSCR @ current status - VFPFMRX r6, FPINST @ FPINST (always there, rev0 onwards) - tst r1, #FPEXC_FPV2 @ is there an FPINST2 to read? - VFPFMRX r8, FPINST2, NE @ FPINST2 if needed - avoids reading - @ nonexistant reg on rev0 - VFPFSTMIA r4 @ save the working registers + tst r1, #FPEXC_EX @ is there additional state to save? + VFPFMRX r6, FPINST, NE @ FPINST (only if FPEXC.EX is set) + tstne r1, #FPEXC_FP2V @ is there an FPINST2 to read? + VFPFMRX r8, FPINST2, NE @ FPINST2 if needed (and present) stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2 @ and point r4 at the word at the @ start of the register dump @@ -114,13 +114,13 @@ no_old_VFP_process: DBGSTR1 "load state %p", r10 str r10, [r3, r11, lsl #2] @ update the last_VFP_context pointer @ Load the saved state back into the VFP - VFPFLDMIA r10 @ reload the working registers while + VFPFLDMIA r10, r5 @ reload the working registers while @ FPEXC is in a safe state ldmia r10, {r1, r5, r6, r8} @ load FPEXC, FPSCR, FPINST, FPINST2 - tst r1, #FPEXC_FPV2 @ is there an FPINST2 to write? - VFPFMXR FPINST2, r8, NE @ FPINST2 if needed - avoids writing - @ nonexistant reg on rev0 - VFPFMXR FPINST, r6 + tst r1, #FPEXC_EX @ is there additional state to restore? + VFPFMXR FPINST, r6, NE @ restore FPINST (only if FPEXC.EX is set) + tstne r1, #FPEXC_FP2V @ is there an FPINST2 to write? + VFPFMXR FPINST2, r8, NE @ FPINST2 if needed (and present) VFPFMXR FPSCR, r5 @ restore status check_for_exception: @@ -136,10 +136,14 @@ check_for_exception: look_for_VFP_exceptions: - tst r1, #FPEXC_EX + @ Check for synchronous or asynchronous exception + tst r1, #FPEXC_EX | FPEXC_DEX bne process_exception + @ On some implementations of the VFP subarch 1, setting FPSCR.IXE + @ causes all the CDP instructions to be bounced synchronously without + @ setting the FPEXC.EX bit VFPFMRX r5, FPSCR - tst r5, #FPSCR_IXE @ IXE doesn't set FPEXC_EX ! + tst r5, #FPSCR_IXE bne process_exception @ Fall into hand on to next handler - appropriate coproc instr @@ -150,10 +154,6 @@ look_for_VFP_exceptions: process_exception: DBGSTR "bounce" - sub r2, r2, #4 - str r2, [sp, #S_PC] @ retry the instruction on exit from - @ the imprecise exception handling in - @ the support code mov r2, sp @ nothing stacked - regdump is at TOS mov lr, r9 @ setup for a return to the user code. @@ -161,7 +161,7 @@ process_exception: @ r0 holds the trigger instruction @ r1 holds the FPEXC value @ r2 pointer to register dump - b VFP9_bounce @ we have handled this - the support + b VFP_bounce @ we have handled this - the support @ code will raise an exception if @ required. If not, the user code will @ retry the faulted instruction @@ -174,12 +174,12 @@ vfp_save_state: @ r0 - save location @ r1 - FPEXC DBGSTR1 "save VFP state %p", r0 + VFPFSTMIA r0, r2 @ save the working registers VFPFMRX r2, FPSCR @ current status - VFPFMRX r3, FPINST @ FPINST (always there, rev0 onwards) - tst r1, #FPEXC_FPV2 @ is there an FPINST2 to read? - VFPFMRX r12, FPINST2, NE @ FPINST2 if needed - avoids reading - @ nonexistant reg on rev0 - VFPFSTMIA r0 @ save the working registers + tst r1, #FPEXC_EX @ is there additional state to save? + VFPFMRX r3, FPINST, NE @ FPINST (only if FPEXC.EX is set) + tstne r1, #FPEXC_FP2V @ is there an FPINST2 to read? + VFPFMRX r12, FPINST2, NE @ FPINST2 if needed (and present) stmia r0, {r1, r2, r3, r12} @ save FPEXC, FPSCR, FPINST, FPINST2 mov pc, lr #endif @@ -217,8 +217,15 @@ vfp_get_double: fmrrd r0, r1, d\dr mov pc, lr .endr +#ifdef CONFIG_VFPv3 + @ d16 - d31 registers + .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 + mrrc p11, 3, r0, r1, c\dr @ fmrrd r0, r1, d\dr + mov pc, lr + .endr +#endif - @ virtual register 16 for compare with zero + @ virtual register 16 (or 32 if VFPv3) for compare with zero mov r0, #0 mov r1, #0 mov pc, lr @@ -231,3 +238,10 @@ vfp_put_double: fmdrr d\dr, r0, r1 mov pc, lr .endr +#ifdef CONFIG_VFPv3 + @ d16 - d31 registers + .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 + mcrr p11, 3, r1, r2, c\dr @ fmdrr r1, r2, d\dr + mov pc, lr + .endr +#endif diff --git a/arch/arm/vfp/vfpinstr.h b/arch/arm/vfp/vfpinstr.h index 7f343a4beca..15b95b5ab97 100644 --- a/arch/arm/vfp/vfpinstr.h +++ b/arch/arm/vfp/vfpinstr.h @@ -52,11 +52,11 @@ #define FEXT_TO_IDX(inst) ((inst & 0x000f0000) >> 15 | (inst & (1 << 7)) >> 7) #define vfp_get_sd(inst) ((inst & 0x0000f000) >> 11 | (inst & (1 << 22)) >> 22) -#define vfp_get_dd(inst) ((inst & 0x0000f000) >> 12) +#define vfp_get_dd(inst) ((inst & 0x0000f000) >> 12 | (inst & (1 << 22)) >> 18) #define vfp_get_sm(inst) ((inst & 0x0000000f) << 1 | (inst & (1 << 5)) >> 5) -#define vfp_get_dm(inst) ((inst & 0x0000000f)) +#define vfp_get_dm(inst) ((inst & 0x0000000f) | (inst & (1 << 5)) >> 1) #define vfp_get_sn(inst) ((inst & 0x000f0000) >> 15 | (inst & (1 << 7)) >> 7) -#define vfp_get_dn(inst) ((inst & 0x000f0000) >> 16) +#define vfp_get_dn(inst) ((inst & 0x000f0000) >> 16 | (inst & (1 << 7)) >> 3) #define vfp_single(inst) (((inst) & 0x0000f00) == 0xa00) diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index b4e210df92f..32455c633f1 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -125,13 +125,13 @@ void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs) send_sig_info(SIGFPE, &info, current); } -static void vfp_panic(char *reason) +static void vfp_panic(char *reason, u32 inst) { int i; printk(KERN_ERR "VFP: Error: %s\n", reason); printk(KERN_ERR "VFP: EXC 0x%08x SCR 0x%08x INST 0x%08x\n", - fmrx(FPEXC), fmrx(FPSCR), fmrx(FPINST)); + fmrx(FPEXC), fmrx(FPSCR), inst); for (i = 0; i < 32; i += 2) printk(KERN_ERR "VFP: s%2u: 0x%08x s%2u: 0x%08x\n", i, vfp_get_float(i), i+1, vfp_get_float(i+1)); @@ -147,19 +147,16 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_ pr_debug("VFP: raising exceptions %08x\n", exceptions); if (exceptions == VFP_EXCEPTION_ERROR) { - vfp_panic("unhandled bounce"); + vfp_panic("unhandled bounce", inst); vfp_raise_sigfpe(0, regs); return; } /* - * If any of the status flags are set, update the FPSCR. + * Update the FPSCR with the additional exception flags. * Comparison instructions always return at least one of * these flags set. */ - if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V)) - fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V); - fpscr |= exceptions; fmxr(FPSCR, fpscr); @@ -220,35 +217,64 @@ static u32 vfp_emulate_instruction(u32 inst, u32 fpscr, struct pt_regs *regs) /* * Package up a bounce condition. */ -void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) +void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) { - u32 fpscr, orig_fpscr, exceptions, inst; + u32 fpscr, orig_fpscr, fpsid, exceptions; pr_debug("VFP: bounce: trigger %08x fpexc %08x\n", trigger, fpexc); /* - * Enable access to the VFP so we can handle the bounce. + * At this point, FPEXC can have the following configuration: + * + * EX DEX IXE + * 0 1 x - synchronous exception + * 1 x 0 - asynchronous exception + * 1 x 1 - sychronous on VFP subarch 1 and asynchronous on later + * 0 0 1 - synchronous on VFP9 (non-standard subarch 1 + * implementation), undefined otherwise + * + * Clear various bits and enable access to the VFP so we can + * handle the bounce. */ - fmxr(FPEXC, fpexc & ~(FPEXC_EX|FPEXC_FPV2|FPEXC_INV|FPEXC_UFC|FPEXC_OFC|FPEXC_IOC)); + fmxr(FPEXC, fpexc & ~(FPEXC_EX|FPEXC_DEX|FPEXC_FP2V|FPEXC_VV|FPEXC_TRAP_MASK)); + fpsid = fmrx(FPSID); orig_fpscr = fpscr = fmrx(FPSCR); /* - * If we are running with inexact exceptions enabled, we need to - * emulate the trigger instruction. Note that as we're emulating - * the trigger instruction, we need to increment PC. + * Check for the special VFP subarch 1 and FPSCR.IXE bit case */ - if (fpscr & FPSCR_IXE) { - regs->ARM_pc += 4; + if ((fpsid & FPSID_ARCH_MASK) == (1 << FPSID_ARCH_BIT) + && (fpscr & FPSCR_IXE)) { + /* + * Synchronous exception, emulate the trigger instruction + */ goto emulate; } - barrier(); + if (fpexc & FPEXC_EX) { + /* + * Asynchronous exception. The instruction is read from FPINST + * and the interrupted instruction has to be restarted. + */ + trigger = fmrx(FPINST); + regs->ARM_pc -= 4; + } else if (!(fpexc & FPEXC_DEX)) { + /* + * Illegal combination of bits. It can be caused by an + * unallocated VFP instruction but with FPSCR.IXE set and not + * on VFP subarch 1. + */ + vfp_raise_exceptions(VFP_EXCEPTION_ERROR, trigger, fpscr, regs); + return; + } /* - * Modify fpscr to indicate the number of iterations remaining + * Modify fpscr to indicate the number of iterations remaining. + * If FPEXC.EX is 0, FPEXC.DEX is 1 and the FPEXC.VV bit indicates + * whether FPEXC.VECITR or FPSCR.LEN is used. */ - if (fpexc & FPEXC_EX) { + if (fpexc & (FPEXC_EX | FPEXC_VV)) { u32 len; len = fpexc + (1 << FPEXC_LENGTH_BIT); @@ -262,15 +288,15 @@ void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) * FPEXC bounce reason, but this appears to be unreliable. * Emulate the bounced instruction instead. */ - inst = fmrx(FPINST); - exceptions = vfp_emulate_instruction(inst, fpscr, regs); + exceptions = vfp_emulate_instruction(trigger, fpscr, regs); if (exceptions) - vfp_raise_exceptions(exceptions, inst, orig_fpscr, regs); + vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs); /* - * If there isn't a second FP instruction, exit now. + * If there isn't a second FP instruction, exit now. Note that + * the FPEXC.FP2V bit is valid only if FPEXC.EX is 1. */ - if (!(fpexc & FPEXC_FPV2)) + if (fpexc ^ (FPEXC_EX | FPEXC_FP2V)) return; /* @@ -279,10 +305,9 @@ void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) */ barrier(); trigger = fmrx(FPINST2); - orig_fpscr = fpscr = fmrx(FPSCR); emulate: - exceptions = vfp_emulate_instruction(trigger, fpscr, regs); + exceptions = vfp_emulate_instruction(trigger, orig_fpscr, regs); if (exceptions) vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs); } @@ -306,16 +331,9 @@ static int __init vfp_init(void) { unsigned int vfpsid; unsigned int cpu_arch = cpu_architecture(); - u32 access = 0; - if (cpu_arch >= CPU_ARCH_ARMv6) { - access = get_copro_access(); - - /* - * Enable full access to VFP (cp10 and cp11) - */ - set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11)); - } + if (cpu_arch >= CPU_ARCH_ARMv6) + vfp_enable(NULL); /* * First check that there is a VFP that we can use. @@ -329,15 +347,9 @@ static int __init vfp_init(void) vfp_vector = vfp_null_entry; printk(KERN_INFO "VFP support v0.3: "); - if (VFP_arch) { + if (VFP_arch) printk("not present\n"); - - /* - * Restore the copro access register. - */ - if (cpu_arch >= CPU_ARCH_ARMv6) - set_copro_access(access); - } else if (vfpsid & FPSID_NODOUBLE) { + else if (vfpsid & FPSID_NODOUBLE) { printk("no double precision support\n"); } else { smp_call_function(vfp_enable, NULL, 1, 1); diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 25232ba0811..fc7ca86ac8b 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -85,11 +85,26 @@ config BF522 help BF522 Processor Support. +config BF523 + bool "BF523" + help + BF523 Processor Support. + +config BF524 + bool "BF524" + help + BF524 Processor Support. + config BF525 bool "BF525" help BF525 Processor Support. +config BF526 + bool "BF526" + help + BF526 Processor Support. + config BF527 bool "BF527" help @@ -198,7 +213,7 @@ endchoice config BF52x bool - depends on (BF522 || BF525 || BF527) + depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527) default y config BF53x @@ -253,11 +268,6 @@ config MEM_MT48LC32M16A2TG_75 depends on (BFIN527_EZKIT) default y -config BFIN_SHARED_FLASH_ENET - bool - depends on (BFIN533_STAMP) - default y - source "arch/blackfin/mach-bf527/Kconfig" source "arch/blackfin/mach-bf533/Kconfig" source "arch/blackfin/mach-bf561/Kconfig" @@ -317,7 +327,7 @@ config VCO_MULT range 1 64 default "22" if BFIN533_EZKIT default "45" if BFIN533_STAMP - default "20" if (BFIN537_STAMP || BFIN527_EZKIT) + default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT) default "22" if BFIN533_BLUETECHNIX_CM default "20" if BFIN537_BLUETECHNIX_CM default "20" if BFIN561_BLUETECHNIX_CM @@ -354,7 +364,7 @@ config SCLK_DIV range 1 15 default 5 if BFIN533_EZKIT default 5 if BFIN533_STAMP - default 4 if (BFIN537_STAMP || BFIN527_EZKIT) + default 4 if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT) default 5 if BFIN533_BLUETECHNIX_CM default 4 if BFIN537_BLUETECHNIX_CM default 4 if BFIN561_BLUETECHNIX_CM @@ -371,7 +381,10 @@ config SCLK_DIV config MAX_VCO_HZ int default 600000000 if BF522 + default 400000000 if BF523 + default 400000000 if BF524 default 600000000 if BF525 + default 400000000 if BF526 default 600000000 if BF527 default 400000000 if BF531 default 400000000 if BF532 @@ -383,6 +396,8 @@ config MAX_VCO_HZ default 533333333 if BF539 default 600000000 if BF542 default 533333333 if BF544 + default 600000000 if BF547 + default 600000000 if BF548 default 533333333 if BF549 default 600000000 if BF561 @@ -409,6 +424,7 @@ config MEM_SIZE default 32 if BFIN533_EZKIT default 64 if BFIN527_EZKIT default 64 if BFIN537_STAMP + default 64 if BFIN548_EZKIT default 64 if BFIN561_EZKIT default 128 if BFIN533_STAMP default 64 if PNAV10 @@ -416,6 +432,7 @@ config MEM_SIZE config MEM_ADD_WIDTH int "SDRAM Memory Address Width" + depends on (!BF54x) default 9 if BFIN533_EZKIT default 9 if BFIN561_EZKIT default 9 if H8606_HVSISTEMAS @@ -424,6 +441,19 @@ config MEM_ADD_WIDTH default 11 if BFIN533_STAMP default 10 if PNAV10 + +choice + prompt "DDR SDRAM Chip Type" + depends on BFIN548_EZKIT + default MEM_MT46V32M16_5B + +config MEM_MT46V32M16_6T + bool "MT46V32M16_6T" + +config MEM_MT46V32M16_5B + bool "MT46V32M16_5B" +endchoice + config ENET_FLASH_PIN int "PF port/pin used for flash and ethernet sharing" depends on (BFIN533_STAMP) @@ -448,40 +478,6 @@ config BOOT_LOAD memory region is used to capture NULL pointer references as well as some core kernel functions. -comment "LED Status Indicators" - depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM) - -config BFIN_ALIVE_LED - bool "Enable Board Alive" - depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM) - default n - help - Blink the LEDs you select when the kernel is running. Helps detect - a hung kernel. - -config BFIN_ALIVE_LED_NUM - int "LED" - depends on BFIN_ALIVE_LED - range 1 3 if BFIN533_STAMP - default "3" if BFIN533_STAMP - help - Select the LED (marked on the board) for you to blink. - -config BFIN_IDLE_LED - bool "Enable System Load/Idle LED" - depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM) - default n - help - Blinks the LED you select when to determine kernel load. - -config BFIN_IDLE_LED_NUM - int "LED" - depends on BFIN_IDLE_LED - range 1 3 if BFIN533_STAMP - default "2" if BFIN533_STAMP - help - Select the LED (marked on the board) for you to blink. - choice prompt "Blackfin Exception Scratch Register" default BFIN_SCRATCH_REG_RETN @@ -528,41 +524,6 @@ config BFIN_SCRATCH_REG_CYCLES endchoice -# -# Sorry - but you need to put the hex address here - -# - -# Flag Data register -config BFIN_ALIVE_LED_PORT - hex - default 0xFFC00700 if (BFIN533_STAMP) - -# Peripheral Flag Direction Register -config BFIN_ALIVE_LED_DPORT - hex - default 0xFFC00730 if (BFIN533_STAMP) - -config BFIN_ALIVE_LED_PIN - hex - default 0x04 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 1) - default 0x08 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 2) - default 0x10 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 3) - -config BFIN_IDLE_LED_PORT - hex - default 0xFFC00700 if (BFIN533_STAMP) - -# Peripheral Flag Direction Register -config BFIN_IDLE_LED_DPORT - hex - default 0xFFC00730 if (BFIN533_STAMP) - -config BFIN_IDLE_LED_PIN - hex - default 0x04 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 1) - default 0x08 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 2) - default 0x10 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 3) - endmenu @@ -799,6 +760,15 @@ config L1_MAX_PIECE Set the max memory pieces for the L1 SRAM allocation algorithm. Min value is 16. Max value is 1024. + +config MPU + bool "Enable the memory protection unit (EXPERIMENTAL)" + default n + help + Use the processor's MPU to protect applications from accessing + memory they do not own. This comes at a performance penalty + and is recommended only for debugging. + comment "Asynchonous Memory Configuration" menu "EBIU_AMGCTL Global Control" @@ -808,7 +778,6 @@ config C_AMCKEN config C_CDPRIO bool "DMA has priority over core for ext. accesses" - depends on !BF54x default n config C_B0PEN @@ -949,8 +918,10 @@ endchoice config PM_WAKEUP_SIC_IWR hex "Wakeup Events (SIC_IWR)" depends on PM_WAKEUP_GPIO_BY_SIC_IWR - default 0x80000000 if (BF537 || BF536 || BF534) - default 0x100000 if (BF533 || BF532 || BF531) + default 0x8 if (BF537 || BF536 || BF534) + default 0x80 if (BF533 || BF532 || BF531) + default 0x80 if (BF54x) + default 0x80 if (BF52x) config PM_WAKEUP_GPIO_NUMBER int "Wakeup GPIO number" diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index c47e000f832..0edc402fef5 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -21,7 +21,10 @@ KBUILD_DEFCONFIG := BF537-STAMP_defconfig # setup the machine name and the machine dependent settings machine-$(CONFIG_BF522) := bf527 +machine-$(CONFIG_BF523) := bf527 +machine-$(CONFIG_BF524) := bf527 machine-$(CONFIG_BF525) := bf527 +machine-$(CONFIG_BF526) := bf527 machine-$(CONFIG_BF527) := bf527 machine-$(CONFIG_BF531) := bf533 machine-$(CONFIG_BF532) := bf533 @@ -39,7 +42,10 @@ MACHINE := $(machine-y) export MACHINE cpu-$(CONFIG_BF522) := bf522 +cpu-$(CONFIG_BF523) := bf523 +cpu-$(CONFIG_BF524) := bf524 cpu-$(CONFIG_BF525) := bf525 +cpu-$(CONFIG_BF526) := bf526 cpu-$(CONFIG_BF527) := bf527 cpu-$(CONFIG_BF531) := bf531 cpu-$(CONFIG_BF532) := bf532 @@ -76,6 +82,12 @@ core-y += arch/$(ARCH)/mach-$(MACHINE)/ core-y += arch/$(ARCH)/mach-$(MACHINE)/boards/ endif +ifeq ($(CONFIG_MPU),y) +core-y += arch/$(ARCH)/kernel/cplb-mpu/ +else +core-y += arch/$(ARCH)/kernel/cplb-nompu/ +endif + libs-y += arch/$(ARCH)/lib/ drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/ diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index fa6eb4e00fa..d59ee1530bd 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.12 +# Linux kernel version: 2.6.22.14 +# Thu Nov 29 17:32:47 2007 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -153,8 +154,8 @@ CONFIG_BFIN527_EZKIT=y CONFIG_BF527_SPORT0_PORTG=y CONFIG_BF527_SPORT0_TSCLK_PG10=y # CONFIG_BF527_SPORT0_TSCLK_PG14 is not set -# CONFIG_BF527_UART1_PORTF is not set -CONFIG_BF527_UART1_PORTG=y +CONFIG_BF527_UART1_PORTF=y +# CONFIG_BF527_UART1_PORTG is not set # CONFIG_BF527_NAND_D_PORTF is not set CONFIG_BF527_NAND_D_PORTH=y @@ -232,7 +233,7 @@ CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # @@ -626,8 +627,8 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y # CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y # # Wireless LAN @@ -1183,7 +1184,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1208,7 +1209,7 @@ CONFIG_ACCESS_CHECK=y # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y +CONFIG_SECURITY_CAPABILITIES=m # # Cryptographic options @@ -1219,7 +1220,7 @@ CONFIG_SECURITY_CAPABILITIES=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set +CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 4fdb49362ba..811711f59a2 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.12 +# Linux kernel version: 2.6.22.16 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -115,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # Processor and Board Settings # # CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set # CONFIG_BF525 is not set +# CONFIG_BF526 is not set # CONFIG_BF527 is not set # CONFIG_BF531 is not set # CONFIG_BF532 is not set @@ -194,7 +197,7 @@ CONFIG_CLKIN_HZ=27000000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=750000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # @@ -267,6 +270,7 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set # # Asynchonous Memory Configuration @@ -321,7 +325,7 @@ CONFIG_PM=y CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y # CONFIG_PM_WAKEUP_BY_GPIO is not set # CONFIG_PM_WAKEUP_GPIO_API is not set -CONFIG_PM_WAKEUP_SIC_IWR=0x100000 +CONFIG_PM_WAKEUP_SIC_IWR=0x80 # # CPU Frequency scaling @@ -510,7 +514,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_INTELEXT is not set # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_MW320D=m CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set @@ -520,9 +523,6 @@ CONFIG_MTD_ROM=m # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_BF5xx=m -CONFIG_BFIN_FLASH_SIZE=0x400000 -CONFIG_EBIU_FLASH_BASE=0x20000000 # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -610,8 +610,8 @@ CONFIG_SMC91X=y # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y # CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y # # Wireless LAN @@ -680,7 +680,6 @@ CONFIG_INPUT_EVDEV=m CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_AD5304 is not set -# CONFIG_BF5xx_FBDMA is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index b04e8e533e9..9b7123cf27a 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.12 +# Linux kernel version: 2.6.22.16 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -115,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # Processor and Board Settings # # CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set # CONFIG_BF525 is not set +# CONFIG_BF526 is not set # CONFIG_BF527 is not set # CONFIG_BF531 is not set # CONFIG_BF532 is not set @@ -140,7 +143,6 @@ CONFIG_BF_REV_0_3=y CONFIG_BF53x=y CONFIG_BFIN_SINGLE_CORE=y CONFIG_MEM_MT48LC64M4A2FB_7E=y -CONFIG_BFIN_SHARED_FLASH_ENET=y # CONFIG_BFIN533_EZKIT is not set CONFIG_BFIN533_STAMP=y # CONFIG_BFIN533_BLUETECHNIX_CM is not set @@ -195,7 +197,7 @@ CONFIG_CLKIN_HZ=11059200 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=750000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # @@ -215,18 +217,10 @@ CONFIG_MEM_ADD_WIDTH=11 CONFIG_ENET_FLASH_PIN=0 CONFIG_BOOT_LOAD=0x1000 -# -# LED Status Indicators -# -# CONFIG_BFIN_ALIVE_LED is not set -# CONFIG_BFIN_IDLE_LED is not set + CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set -CONFIG_BFIN_ALIVE_LED_PORT=0xFFC00700 -CONFIG_BFIN_ALIVE_LED_DPORT=0xFFC00730 -CONFIG_BFIN_IDLE_LED_PORT=0xFFC00700 -CONFIG_BFIN_IDLE_LED_DPORT=0xFFC00730 # # Blackfin Kernel Optimizations @@ -279,6 +273,7 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set # # Asynchonous Memory Configuration @@ -333,7 +328,7 @@ CONFIG_PM=y CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y # CONFIG_PM_WAKEUP_BY_GPIO is not set # CONFIG_PM_WAKEUP_GPIO_API is not set -CONFIG_PM_WAKEUP_SIC_IWR=0x100000 +CONFIG_PM_WAKEUP_SIC_IWR=0x80 # # CPU Frequency scaling @@ -522,7 +517,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_INTELEXT is not set # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_MW320D=m CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set @@ -532,17 +526,6 @@ CONFIG_MTD_ROM=m # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_BF5xx=m -CONFIG_BFIN_FLASH_SIZE=0x400000 -CONFIG_EBIU_FLASH_BASE=0x20000000 - -# -# FLASH_EBIU_AMBCTL Control -# -CONFIG_BFIN_FLASH_BANK_0=0x7BB0 -CONFIG_BFIN_FLASH_BANK_1=0x7BB0 -CONFIG_BFIN_FLASH_BANK_2=0x7BB0 -CONFIG_BFIN_FLASH_BANK_3=0x7BB0 # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -630,8 +613,8 @@ CONFIG_SMC91X=y # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y # CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y # # Wireless LAN @@ -687,7 +670,6 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_UINPUT is not set -# CONFIG_BF53X_PFBUTTONS is not set CONFIG_TWI_KEYPAD=m CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39 @@ -711,8 +693,6 @@ CONFIG_BFIN_SPORT=y CONFIG_TWI_LCD=m CONFIG_TWI_LCD_SLAVE_ADDR=34 # CONFIG_AD5304 is not set -# CONFIG_BF5xx_TEA5764 is not set -# CONFIG_BF5xx_FBDMA is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -778,7 +758,6 @@ CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support # -# CONFIG_I2C_BLACKFIN_GPIO is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index f812b66318b..b37ccc681e7 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.12 +# Linux kernel version: 2.6.22.16 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -115,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # Processor and Board Settings # # CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set # CONFIG_BF525 is not set +# CONFIG_BF526 is not set # CONFIG_BF527 is not set # CONFIG_BF531 is not set # CONFIG_BF532 is not set @@ -170,6 +173,7 @@ CONFIG_IRQ_WATCH=13 CONFIG_BFIN537_STAMP=y # CONFIG_BFIN537_BLUETECHNIX_CM is not set # CONFIG_PNAV10 is not set +# CONFIG_CAMSIG_MINOTAUR is not set # CONFIG_GENERIC_BF537_BOARD is not set # @@ -201,7 +205,7 @@ CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # @@ -274,6 +278,7 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set # # Asynchonous Memory Configuration @@ -328,7 +333,7 @@ CONFIG_PM=y CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y # CONFIG_PM_WAKEUP_BY_GPIO is not set # CONFIG_PM_WAKEUP_GPIO_API is not set -CONFIG_PM_WAKEUP_SIC_IWR=0x80000000 +CONFIG_PM_WAKEUP_SIC_IWR=0x8 # # CPU Frequency scaling @@ -483,7 +488,7 @@ CONFIG_MTD=y # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y # # User Modules And Translation Layers @@ -500,8 +505,8 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -# CONFIG_MTD_CFI is not set -CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_CFI=m +# CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=m # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y @@ -515,9 +520,9 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_CFI_AMDSTD is not set +CONFIG_MTD_CFI_AMDSTD=m # CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_MW320D=m +CONFIG_MTD_CFI_UTIL=m CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set @@ -525,11 +530,11 @@ CONFIG_MTD_ROM=m # # Mapping drivers for chip access # -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_BF5xx=m -CONFIG_BFIN_FLASH_SIZE=0x400000 -CONFIG_EBIU_FLASH_BASE=0x20000000 +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +CONFIG_MTD_PHYSMAP_START=0x20000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -647,8 +652,8 @@ CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y # CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y # # Wireless LAN @@ -704,7 +709,6 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_UINPUT is not set -# CONFIG_BF53X_PFBUTTONS is not set CONFIG_TWI_KEYPAD=m CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72 @@ -728,8 +732,6 @@ CONFIG_BFIN_SPORT=y CONFIG_TWI_LCD=m CONFIG_TWI_LCD_SLAVE_ADDR=34 # CONFIG_AD5304 is not set -# CONFIG_BF5xx_TEA5764 is not set -# CONFIG_BF5xx_FBDMA is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -802,7 +804,6 @@ CONFIG_I2C_CHARDEV=m # # I2C Hardware Bus support # -# CONFIG_I2C_BLACKFIN_GPIO is not set CONFIG_I2C_BLACKFIN_TWI=m CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 # CONFIG_I2C_GPIO is not set @@ -957,6 +958,7 @@ CONFIG_LQ035_SLAVE_ADDR=0x58 # CONFIG_FB_BFIN_LANDSCAPE is not set # CONFIG_FB_BFIN_BGR is not set # CONFIG_FB_BFIN_T350MCQB is not set +# CONFIG_FB_HITACHI_TX09 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_LOGO is not set @@ -1008,12 +1010,22 @@ CONFIG_SND_BFIN_AD73311_SE=4 # # System on Chip audio support # -# CONFIG_SND_SOC is not set +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_SOC=m +CONFIG_SND_BF5XX_SOC=m +CONFIG_SND_BF5XX_SOC_AC97=m +# CONFIG_SND_BF5XX_SOC_WM8750 is not set +# CONFIG_SND_BF5XX_SOC_WM8731 is not set +CONFIG_SND_BF5XX_SOC_BF5xx=m +CONFIG_SND_BF5XX_SPORT_NUM=0 +# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set +CONFIG_SND_SOC_AD1980=m # # Open Sound System # # CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m # # HID Devices diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index 48367cc9fe3..fd702161ef5 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.12 +# Linux kernel version: 2.6.22.16 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -115,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # Processor and Board Settings # # CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set # CONFIG_BF525 is not set +# CONFIG_BF526 is not set # CONFIG_BF527 is not set # CONFIG_BF531 is not set # CONFIG_BF532 is not set @@ -126,8 +129,8 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_BF542 is not set # CONFIG_BF544 is not set # CONFIG_BF547 is not set -# CONFIG_BF548 is not set -CONFIG_BF549=y +CONFIG_BF548=y +# CONFIG_BF549 is not set # CONFIG_BF561 is not set CONFIG_BF_REV_0_0=y # CONFIG_BF_REV_0_1 is not set @@ -265,9 +268,9 @@ CONFIG_PINT3_ASSIGN=0x02020303 # CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set -CONFIG_MAX_VCO_HZ=533000000 +CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # @@ -283,7 +286,8 @@ CONFIG_HZ=250 # Memory Setup # CONFIG_MEM_SIZE=64 -CONFIG_MEM_ADD_WIDTH=10 +# CONFIG_MEM_MT46V32M16_6T is not set +CONFIG_MEM_MT46V32M16_5B=y CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set @@ -340,6 +344,7 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set # # Asynchonous Memory Configuration @@ -349,6 +354,7 @@ CONFIG_L1_MAX_PIECE=16 # EBIU_AMGCTL Global Control # CONFIG_C_AMCKEN=y +# CONFIG_C_CDPRIO is not set # CONFIG_C_AMBEN is not set # CONFIG_C_AMBEN_B0 is not set # CONFIG_C_AMBEN_B0_B1 is not set @@ -362,9 +368,9 @@ CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x5554 CONFIG_BANK_2=0x7BB0 CONFIG_BANK_3=0x99B3 -CONFIG_EBUI_MBSCTLVAL=0x0 -CONFIG_EBUI_MODEVAL=0x1 -CONFIG_EBUI_FCTLVAL=0x6 +CONFIG_EBIU_MBSCTLVAL=0x0 +CONFIG_EBIU_MODEVAL=0x1 +CONFIG_EBIU_FCTLVAL=0x6 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) @@ -537,7 +543,6 @@ CONFIG_MTD_CFI_I2=y CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set -# CONFIG_MTD_MW320D is not set CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set @@ -549,9 +554,8 @@ CONFIG_MTD_RAM=y CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0x20000000 -CONFIG_MTD_PHYSMAP_LEN=0x400000 +CONFIG_MTD_PHYSMAP_LEN=0 CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_BF5xx is not set # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -690,8 +694,8 @@ CONFIG_MII=y CONFIG_SMSC911X=y # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y # CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y # # Wireless LAN @@ -719,7 +723,7 @@ CONFIG_NETDEV_10000=y # # Input device support # -CONFIG_INPUT=m +CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set @@ -745,7 +749,8 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_GPIO is not set -CONFIG_KEYBOARD_BFIN=m +CONFIG_KEYBOARD_BFIN=y +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -768,7 +773,6 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_UINPUT is not set -# CONFIG_BF53X_PFBUTTONS is not set # CONFIG_TWI_KEYPAD is not set # @@ -786,13 +790,16 @@ CONFIG_INPUT_MISC=y # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_OTP=y +# CONFIG_BFIN_OTP_WRITE_ENABLE is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_TWI_LCD is not set # CONFIG_AD5304 is not set -# CONFIG_BF5xx_TEA5764 is not set -# CONFIG_BF5xx_FBDMA is not set -# CONFIG_VT is not set +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -858,7 +865,6 @@ CONFIG_I2C_CHARDEV=y # # I2C Hardware Bus support # -# CONFIG_I2C_BLACKFIN_GPIO is not set CONFIG_I2C_BLACKFIN_TWI=y CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 # CONFIG_I2C_GPIO is not set @@ -976,12 +982,12 @@ CONFIG_DAB=y # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set -CONFIG_FB=m +CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=m -CONFIG_FB_CFB_COPYAREA=m -CONFIG_FB_CFB_IMAGEBLIT=m +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set @@ -998,11 +1004,34 @@ CONFIG_FB_DEFERRED_IO=y # # CONFIG_FB_BFIN_7171 is not set # CONFIG_FB_BFIN_7393 is not set -CONFIG_FB_BF54X_LQ043=m +CONFIG_FB_BF54X_LQ043=y # CONFIG_FB_BFIN_T350MCQB is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set -# CONFIG_LOGO is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +CONFIG_FONT_6x11=y +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +# CONFIG_LOGO_BLACKFIN_VGA16 is not set +CONFIG_LOGO_BLACKFIN_CLUT224=y # # Sound @@ -1051,7 +1080,8 @@ CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y # CONFIG_SND_BF5XX_SOC_WM8750 is not set # CONFIG_SND_BF5XX_SOC_WM8731 is not set CONFIG_SND_BF5XX_SPORT_NUM=0 -# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set +CONFIG_SND_BF5XX_HAVE_COLD_RESET=y +CONFIG_SND_BF5XX_RESET_GPIO_NUM=19 CONFIG_SND_SOC_AD1980=y # @@ -1403,7 +1433,7 @@ CONFIG_NLS_UTF8=m # # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1428,7 +1458,7 @@ CONFIG_ACCESS_CHECK=y # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y +CONFIG_SECURITY_CAPABILITIES=m # # Cryptographic options @@ -1439,7 +1469,7 @@ CONFIG_SECURITY_CAPABILITIES=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set +CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index e9f100b45eb..8546994939f 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.12 +# Linux kernel version: 2.6.22.16 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -115,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # Processor and Board Settings # # CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set # CONFIG_BF525 is not set +# CONFIG_BF526 is not set # CONFIG_BF527 is not set # CONFIG_BF531 is not set # CONFIG_BF532 is not set @@ -238,7 +241,7 @@ CONFIG_CLKIN_HZ=30000000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # @@ -311,6 +314,7 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set # # Asynchonous Memory Configuration @@ -512,7 +516,7 @@ CONFIG_MTD=y # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y # # User Modules And Translation Layers @@ -529,8 +533,8 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -# CONFIG_MTD_CFI is not set -CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_CFI=m +# CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=m # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y @@ -544,9 +548,9 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_CFI_AMDSTD is not set +CONFIG_MTD_CFI_AMDSTD=m # CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_MW320D=m +CONFIG_MTD_CFI_UTIL=m CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set @@ -554,12 +558,11 @@ CONFIG_MTD_ROM=m # # Mapping drivers for chip access # -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_EZKIT561 is not set -CONFIG_MTD_BF5xx=m -CONFIG_BFIN_FLASH_SIZE=0x0400000 -CONFIG_EBIU_FLASH_BASE=0x20000000 +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +CONFIG_MTD_PHYSMAP_START=0x20000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -647,8 +650,8 @@ CONFIG_SMC91X=y # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y # CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y # # Wireless LAN @@ -717,7 +720,6 @@ CONFIG_INPUT_EVDEV=m # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_AD5304 is not set -# CONFIG_BF5xx_FBDMA is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 8a4cfb293b2..318b9b692a4 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -7,7 +7,7 @@ extra-y := init_task.o vmlinux.lds obj-y := \ entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \ sys_bfin.o time.o traps.o irqchip.o dma-mapping.o flat.o \ - fixed_code.o cplbinit.o cacheinit.o reboot.o bfin_gpio.o + fixed_code.o reboot.o bfin_gpio.o obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o obj-$(CONFIG_MODULES) += module.o diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index b54446055a4..fa9debe8d5f 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -339,13 +339,13 @@ EXPORT_SYMBOL(set_dma_config); unsigned short set_bfin_dma_config(char direction, char flow_mode, - char intr_mode, char dma_mode, char width) + char intr_mode, char dma_mode, char width, char syncmode) { unsigned short config; config = ((direction << 1) | (width << 2) | (dma_mode << 4) | - (intr_mode << 6) | (flow_mode << 12) | RESTART); + (intr_mode << 6) | (flow_mode << 12) | (syncmode << 5)); return config; } EXPORT_SYMBOL(set_bfin_dma_config); diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index ce85d4bf34c..6bbe0a2fccb 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -7,7 +7,7 @@ * Description: GPIO Abstraction Layer * * Modified: - * Copyright 2007 Analog Devices Inc. + * Copyright 2008 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -83,6 +83,7 @@ #include <linux/delay.h> #include <linux/module.h> #include <linux/err.h> +#include <linux/proc_fs.h> #include <asm/blackfin.h> #include <asm/gpio.h> #include <asm/portmux.h> @@ -136,7 +137,6 @@ static unsigned short *port_fer[gpio_bank(MAX_BLACKFIN_GPIOS)] = { (unsigned short *) PORTG_FER, (unsigned short *) PORTH_FER, }; - #endif #ifdef BF527_FAMILY @@ -178,15 +178,13 @@ static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = { #endif static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; -static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS + 16)]; +static unsigned short reserved_peri_map[gpio_bank(MAX_RESOURCES)]; -#define MAX_RESOURCES 256 #define RESOURCE_LABEL_SIZE 16 -struct str_ident { +static struct str_ident { char name[RESOURCE_LABEL_SIZE]; -} *str_ident; - +} str_ident[MAX_RESOURCES]; #ifdef CONFIG_PM static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; @@ -212,7 +210,7 @@ static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INT #endif /* CONFIG_PM */ #if defined(BF548_FAMILY) -inline int check_gpio(unsigned short gpio) +inline int check_gpio(unsigned gpio) { if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 || gpio == GPIO_PH14 || gpio == GPIO_PH15 @@ -222,7 +220,7 @@ inline int check_gpio(unsigned short gpio) return 0; } #else -inline int check_gpio(unsigned short gpio) +inline int check_gpio(unsigned gpio) { if (gpio >= MAX_BLACKFIN_GPIOS) return -EINVAL; @@ -230,9 +228,13 @@ inline int check_gpio(unsigned short gpio) } #endif -static void set_label(unsigned short ident, const char *label) +void gpio_error(unsigned gpio) { + printk(KERN_ERR "bfin-gpio: GPIO %d wasn't requested!\n", gpio); +} +static void set_label(unsigned short ident, const char *label) +{ if (label && str_ident) { strncpy(str_ident[ident].name, label, RESOURCE_LABEL_SIZE); @@ -250,6 +252,11 @@ static char *get_label(unsigned short ident) static int cmp_label(unsigned short ident, const char *label) { + if (label == NULL) { + dump_stack(); + printk(KERN_ERR "Please provide none-null label\n"); + } + if (label && str_ident) return strncmp(str_ident[ident].name, label, strlen(label)); @@ -258,7 +265,7 @@ static int cmp_label(unsigned short ident, const char *label) } #if defined(BF527_FAMILY) || defined(BF537_FAMILY) -static void port_setup(unsigned short gpio, unsigned short usage) +static void port_setup(unsigned gpio, unsigned short usage) { if (!check_gpio(gpio)) { if (usage == GPIO_USAGE) @@ -269,7 +276,7 @@ static void port_setup(unsigned short gpio, unsigned short usage) } } #elif defined(BF548_FAMILY) -static void port_setup(unsigned short gpio, unsigned short usage) +static void port_setup(unsigned gpio, unsigned short usage) { if (usage == GPIO_USAGE) gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); @@ -390,7 +397,7 @@ inline void portmux_setup(unsigned short portno, unsigned short function) #endif #ifndef BF548_FAMILY -static void default_gpio(unsigned short gpio) +static void default_gpio(unsigned gpio) { unsigned short bank, bitmask; unsigned long flags; @@ -410,7 +417,6 @@ static void default_gpio(unsigned short gpio) gpio_bankb[bank]->edge &= ~bitmask; AWA_DUMMY_READ(edge); local_irq_restore(flags); - } #else # define default_gpio(...) do { } while (0) @@ -418,12 +424,6 @@ static void default_gpio(unsigned short gpio) static int __init bfin_gpio_init(void) { - str_ident = kcalloc(MAX_RESOURCES, - sizeof(struct str_ident), GFP_KERNEL); - if (str_ident == NULL) - return -ENOMEM; - - memset(str_ident, 0, MAX_RESOURCES * sizeof(struct str_ident)); printk(KERN_INFO "Blackfin GPIO Controller\n"); @@ -454,10 +454,9 @@ arch_initcall(bfin_gpio_init); /* Set a specific bit */ #define SET_GPIO(name) \ -void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \ +void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \ local_irq_save(flags); \ if (arg) \ gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \ @@ -477,10 +476,9 @@ SET_GPIO(both) #if ANOMALY_05000311 || ANOMALY_05000323 #define SET_GPIO_SC(name) \ -void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \ +void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \ local_irq_save(flags); \ if (arg) \ gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ @@ -492,9 +490,8 @@ void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \ EXPORT_SYMBOL(set_gpio_ ## name); #else #define SET_GPIO_SC(name) \ -void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \ +void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ { \ - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \ if (arg) \ gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ else \ @@ -508,19 +505,17 @@ SET_GPIO_SC(maskb) SET_GPIO_SC(data) #if ANOMALY_05000311 || ANOMALY_05000323 -void set_gpio_toggle(unsigned short gpio) +void set_gpio_toggle(unsigned gpio) { unsigned long flags; - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); local_irq_save(flags); gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio); AWA_DUMMY_READ(toggle); local_irq_restore(flags); } #else -void set_gpio_toggle(unsigned short gpio) +void set_gpio_toggle(unsigned gpio) { - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio); } #endif @@ -531,7 +526,7 @@ EXPORT_SYMBOL(set_gpio_toggle); #if ANOMALY_05000311 || ANOMALY_05000323 #define SET_GPIO_P(name) \ -void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \ +void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ local_irq_save(flags); \ @@ -542,7 +537,7 @@ void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \ EXPORT_SYMBOL(set_gpiop_ ## name); #else #define SET_GPIO_P(name) \ -void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \ +void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \ { \ gpio_bankb[gpio_bank(gpio)]->name = arg; \ } \ @@ -558,11 +553,10 @@ SET_GPIO_P(both) SET_GPIO_P(maska) SET_GPIO_P(maskb) - /* Get a specific bit */ #if ANOMALY_05000311 || ANOMALY_05000323 #define GET_GPIO(name) \ -unsigned short get_gpio_ ## name(unsigned short gpio) \ +unsigned short get_gpio_ ## name(unsigned gpio) \ { \ unsigned long flags; \ unsigned short ret; \ @@ -575,7 +569,7 @@ unsigned short get_gpio_ ## name(unsigned short gpio) \ EXPORT_SYMBOL(get_gpio_ ## name); #else #define GET_GPIO(name) \ -unsigned short get_gpio_ ## name(unsigned short gpio) \ +unsigned short get_gpio_ ## name(unsigned gpio) \ { \ return (0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio))); \ } \ @@ -595,7 +589,7 @@ GET_GPIO(maskb) #if ANOMALY_05000311 || ANOMALY_05000323 #define GET_GPIO_P(name) \ -unsigned short get_gpiop_ ## name(unsigned short gpio) \ +unsigned short get_gpiop_ ## name(unsigned gpio) \ { \ unsigned long flags; \ unsigned short ret; \ @@ -608,7 +602,7 @@ unsigned short get_gpiop_ ## name(unsigned short gpio) \ EXPORT_SYMBOL(get_gpiop_ ## name); #else #define GET_GPIO_P(name) \ -unsigned short get_gpiop_ ## name(unsigned short gpio) \ +unsigned short get_gpiop_ ## name(unsigned gpio) \ { \ return (gpio_bankb[gpio_bank(gpio)]->name);\ } \ @@ -645,7 +639,7 @@ GET_GPIO_P(maskb) ************************************************************* * MODIFICATION HISTORY : **************************************************************/ -int gpio_pm_wakeup_request(unsigned short gpio, unsigned char type) +int gpio_pm_wakeup_request(unsigned gpio, unsigned char type) { unsigned long flags; @@ -653,7 +647,6 @@ int gpio_pm_wakeup_request(unsigned short gpio, unsigned char type) return -EINVAL; local_irq_save(flags); - wakeup_map[gpio_bank(gpio)] |= gpio_bit(gpio); wakeup_flags_map[gpio] = type; local_irq_restore(flags); @@ -662,7 +655,7 @@ int gpio_pm_wakeup_request(unsigned short gpio, unsigned char type) } EXPORT_SYMBOL(gpio_pm_wakeup_request); -void gpio_pm_wakeup_free(unsigned short gpio) +void gpio_pm_wakeup_free(unsigned gpio) { unsigned long flags; @@ -677,7 +670,7 @@ void gpio_pm_wakeup_free(unsigned short gpio) } EXPORT_SYMBOL(gpio_pm_wakeup_free); -static int bfin_gpio_wakeup_type(unsigned short gpio, unsigned char type) +static int bfin_gpio_wakeup_type(unsigned gpio, unsigned char type) { port_setup(gpio, GPIO_USAGE); set_gpio_dir(gpio, 0); @@ -784,6 +777,14 @@ void gpio_pm_restore(void) } #endif +#else /* BF548_FAMILY */ + +unsigned short get_gpio_dir(unsigned gpio) +{ + return (0x01 & (gpio_array[gpio_bank(gpio)]->port_dir_clear >> gpio_sub_n(gpio))); +} +EXPORT_SYMBOL(get_gpio_dir); + #endif /* BF548_FAMILY */ /*********************************************************** @@ -1028,7 +1029,7 @@ EXPORT_SYMBOL(peripheral_free_list); * MODIFICATION HISTORY : **************************************************************/ -int gpio_request(unsigned short gpio, const char *label) +int gpio_request(unsigned gpio, const char *label) { unsigned long flags; @@ -1075,7 +1076,7 @@ int gpio_request(unsigned short gpio, const char *label) } EXPORT_SYMBOL(gpio_request); -void gpio_free(unsigned short gpio) +void gpio_free(unsigned gpio) { unsigned long flags; @@ -1085,7 +1086,7 @@ void gpio_free(unsigned short gpio) local_irq_save(flags); if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { - printk(KERN_ERR "bfin-gpio: GPIO %d wasn't reserved!\n", gpio); + gpio_error(gpio); dump_stack(); local_irq_restore(flags); return; @@ -1101,44 +1102,55 @@ void gpio_free(unsigned short gpio) } EXPORT_SYMBOL(gpio_free); + #ifdef BF548_FAMILY -void gpio_direction_input(unsigned short gpio) +int gpio_direction_input(unsigned gpio) { unsigned long flags; - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); + if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + gpio_error(gpio); + return -EINVAL; + } local_irq_save(flags); gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); local_irq_restore(flags); + + return 0; } EXPORT_SYMBOL(gpio_direction_input); -void gpio_direction_output(unsigned short gpio) +int gpio_direction_output(unsigned gpio, int value) { unsigned long flags; - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); + if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + gpio_error(gpio); + return -EINVAL; + } local_irq_save(flags); gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio); + gpio_set_value(gpio, value); gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio); local_irq_restore(flags); + + return 0; } EXPORT_SYMBOL(gpio_direction_output); -void gpio_set_value(unsigned short gpio, unsigned short arg) +void gpio_set_value(unsigned gpio, int arg) { if (arg) gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio); else gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio); - } EXPORT_SYMBOL(gpio_set_value); -unsigned short gpio_get_value(unsigned short gpio) +int gpio_get_value(unsigned gpio) { return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio))); } @@ -1146,31 +1158,47 @@ EXPORT_SYMBOL(gpio_get_value); #else -void gpio_direction_input(unsigned short gpio) +int gpio_direction_input(unsigned gpio) { unsigned long flags; - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); + if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + gpio_error(gpio); + return -EINVAL; + } local_irq_save(flags); gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio); AWA_DUMMY_READ(inen); local_irq_restore(flags); + + return 0; } EXPORT_SYMBOL(gpio_direction_input); -void gpio_direction_output(unsigned short gpio) +int gpio_direction_output(unsigned gpio, int value) { unsigned long flags; - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); + if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + gpio_error(gpio); + return -EINVAL; + } local_irq_save(flags); gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); + + if (value) + gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio); + else + gpio_bankb[gpio_bank(gpio)]->data_clear = gpio_bit(gpio); + gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio); AWA_DUMMY_READ(dir); local_irq_restore(flags); + + return 0; } EXPORT_SYMBOL(gpio_direction_output); @@ -1190,7 +1218,40 @@ void bfin_gpio_reset_spi0_ssel1(void) port_setup(gpio, GPIO_USAGE); gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio); + AWA_DUMMY_READ(data_set); udelay(1); } #endif /*BF548_FAMILY */ + +#if defined(CONFIG_PROC_FS) +static int gpio_proc_read(char *buf, char **start, off_t offset, + int len, int *unused_i, void *unused_v) +{ + int c, outlen = 0; + + for (c = 0; c < MAX_RESOURCES; c++) { + if (!check_gpio(c) && (reserved_gpio_map[gpio_bank(c)] & gpio_bit(c))) + len = sprintf(buf, "GPIO_%d: %s \t\tGPIO %s\n", c, + get_label(c), get_gpio_dir(c) ? "OUTPUT" : "INPUT"); + else if (reserved_peri_map[gpio_bank(c)] & gpio_bit(c)) + len = sprintf(buf, "GPIO_%d: %s \t\tPeripheral\n", c, get_label(c)); + else + continue; + buf += len; + outlen += len; + } + return outlen; +} + +static __init int gpio_register_proc(void) +{ + struct proc_dir_entry *proc_gpio; + + proc_gpio = create_proc_entry("gpio", S_IRUGO, NULL); + if (proc_gpio) + proc_gpio->read_proc = gpio_proc_read; + return proc_gpio != NULL; +} +__initcall(gpio_register_proc); +#endif diff --git a/arch/blackfin/kernel/cplb-mpu/Makefile b/arch/blackfin/kernel/cplb-mpu/Makefile new file mode 100644 index 00000000000..286b69357f9 --- /dev/null +++ b/arch/blackfin/kernel/cplb-mpu/Makefile @@ -0,0 +1,8 @@ +# +# arch/blackfin/kernel/cplb-nompu/Makefile +# + +obj-y := cplbinit.o cacheinit.o cplbmgr.o + +obj-$(CONFIG_CPLB_INFO) += cplbinfo.o + diff --git a/arch/blackfin/kernel/cplb-mpu/cacheinit.c b/arch/blackfin/kernel/cplb-mpu/cacheinit.c new file mode 100644 index 00000000000..9eecfa40318 --- /dev/null +++ b/arch/blackfin/kernel/cplb-mpu/cacheinit.c @@ -0,0 +1,62 @@ +/* + * Copyright 2004-2007 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/cpu.h> + +#include <asm/cacheflush.h> +#include <asm/blackfin.h> +#include <asm/cplb.h> +#include <asm/cplbinit.h> + +#if defined(CONFIG_BFIN_ICACHE) +void bfin_icache_init(void) +{ + unsigned long ctrl; + int i; + + SSYNC(); + for (i = 0; i < MAX_CPLBS; i++) { + bfin_write32(ICPLB_ADDR0 + i * 4, icplb_tbl[i].addr); + bfin_write32(ICPLB_DATA0 + i * 4, icplb_tbl[i].data); + } + ctrl = bfin_read_IMEM_CONTROL(); + ctrl |= IMC | ENICPLB; + bfin_write_IMEM_CONTROL(ctrl); + SSYNC(); +} +#endif + +#if defined(CONFIG_BFIN_DCACHE) +void bfin_dcache_init(void) +{ + unsigned long ctrl; + int i; + + SSYNC(); + for (i = 0; i < MAX_CPLBS; i++) { + bfin_write32(DCPLB_ADDR0 + i * 4, dcplb_tbl[i].addr); + bfin_write32(DCPLB_DATA0 + i * 4, dcplb_tbl[i].data); + } + + ctrl = bfin_read_DMEM_CONTROL(); + ctrl |= DMEM_CNTR; + bfin_write_DMEM_CONTROL(ctrl); + SSYNC(); +} +#endif diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinfo.c b/arch/blackfin/kernel/cplb-mpu/cplbinfo.c new file mode 100644 index 00000000000..bd072299f7f --- /dev/null +++ b/arch/blackfin/kernel/cplb-mpu/cplbinfo.c @@ -0,0 +1,144 @@ +/* + * File: arch/blackfin/mach-common/cplbinfo.c + * Based on: + * Author: Sonic Zhang <sonic.zhang@analog.com> + * + * Created: Jan. 2005 + * Description: Display CPLB status + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/proc_fs.h> +#include <linux/uaccess.h> + +#include <asm/current.h> +#include <asm/system.h> +#include <asm/cplb.h> +#include <asm/cplbinit.h> +#include <asm/blackfin.h> + +#define CPLB_I 1 +#define CPLB_D 2 + +#define SYNC_SYS SSYNC() +#define SYNC_CORE CSYNC() + +#define CPLB_BIT_PAGESIZE 0x30000 + +static char page_size_string_table[][4] = { "1K", "4K", "1M", "4M" }; + +static char *cplb_print_entry(char *buf, struct cplb_entry *tbl, int switched) +{ + int i; + buf += sprintf(buf, "Index\tAddress\t\tData\tSize\tU/RD\tU/WR\tS/WR\tSwitch\n"); + for (i = 0; i < MAX_CPLBS; i++) { + unsigned long data = tbl[i].data; + unsigned long addr = tbl[i].addr; + if (!(data & CPLB_VALID)) + continue; + + buf += + sprintf(buf, + "%d\t0x%08lx\t%06lx\t%s\t%c\t%c\t%c\t%c\n", + i, addr, data, + page_size_string_table[(data & 0x30000) >> 16], + (data & CPLB_USER_RD) ? 'Y' : 'N', + (data & CPLB_USER_WR) ? 'Y' : 'N', + (data & CPLB_SUPV_WR) ? 'Y' : 'N', + i < switched ? 'N' : 'Y'); + } + buf += sprintf(buf, "\n"); + + return buf; +} + +int cplbinfo_proc_output(char *buf) +{ + char *p; + + p = buf; + + p += sprintf(p, "------------------ CPLB Information ------------------\n\n"); + + if (bfin_read_IMEM_CONTROL() & ENICPLB) { + p += sprintf(p, "Instruction CPLB entry:\n"); + p = cplb_print_entry(p, icplb_tbl, first_switched_icplb); + } else + p += sprintf(p, "Instruction CPLB is disabled.\n\n"); + + if (1 || bfin_read_DMEM_CONTROL() & ENDCPLB) { + p += sprintf(p, "Data CPLB entry:\n"); + p = cplb_print_entry(p, dcplb_tbl, first_switched_dcplb); + } else + p += sprintf(p, "Data CPLB is disabled.\n"); + + p += sprintf(p, "ICPLB miss: %d\nICPLB supervisor miss: %d\n", + nr_icplb_miss, nr_icplb_supv_miss); + p += sprintf(p, "DCPLB miss: %d\nDCPLB protection fault:%d\n", + nr_dcplb_miss, nr_dcplb_prot); + p += sprintf(p, "CPLB flushes: %d\n", + nr_cplb_flush); + + return p - buf; +} + +static int cplbinfo_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + int len; + + len = cplbinfo_proc_output(page); + if (len <= off + count) + *eof = 1; + *start = page + off; + len -= off; + if (len > count) + len = count; + if (len < 0) + len = 0; + return len; +} + +static int __init cplbinfo_init(void) +{ + struct proc_dir_entry *entry; + + entry = create_proc_entry("cplbinfo", 0, NULL); + if (!entry) + return -ENOMEM; + + entry->read_proc = cplbinfo_read_proc; + entry->data = NULL; + + return 0; +} + +static void __exit cplbinfo_exit(void) +{ + remove_proc_entry("cplbinfo", NULL); +} + +module_init(cplbinfo_init); +module_exit(cplbinfo_exit); diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c new file mode 100644 index 00000000000..e2e2b5079f5 --- /dev/null +++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c @@ -0,0 +1,91 @@ +/* + * Blackfin CPLB initialization + * + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/module.h> + +#include <asm/blackfin.h> +#include <asm/cplb.h> +#include <asm/cplbinit.h> + +struct cplb_entry icplb_tbl[MAX_CPLBS]; +struct cplb_entry dcplb_tbl[MAX_CPLBS]; + +int first_switched_icplb, first_switched_dcplb; +int first_mask_dcplb; + +void __init generate_cpl_tables(void) +{ + int i_d, i_i; + unsigned long addr; + unsigned long d_data, i_data; + unsigned long d_cache = 0, i_cache = 0; + +#ifdef CONFIG_BFIN_ICACHE + i_cache = CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; +#endif + +#ifdef CONFIG_BFIN_DCACHE + d_cache = CPLB_L1_CHBL; +#ifdef CONFIG_BLKFIN_WT + d_cache |= CPLB_L1_AOW | CPLB_WT; +#endif +#endif + i_d = i_i = 0; + + /* Set up the zero page. */ + dcplb_tbl[i_d].addr = 0; + dcplb_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB; + +#if 0 + icplb_tbl[i_i].addr = 0; + icplb_tbl[i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_4KB; +#endif + + /* Cover kernel memory with 4M pages. */ + addr = 0; + d_data = d_cache | CPLB_SUPV_WR | CPLB_VALID | PAGE_SIZE_4MB | CPLB_DIRTY; + i_data = i_cache | CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4MB; + + for (; addr < memory_start; addr += 4 * 1024 * 1024) { + dcplb_tbl[i_d].addr = addr; + dcplb_tbl[i_d++].data = d_data; + icplb_tbl[i_i].addr = addr; + icplb_tbl[i_i++].data = i_data | (addr == 0 ? CPLB_USER_RD : 0); + } + + /* Cover L1 memory. One 4M area for code and data each is enough. */ +#if L1_DATA_A_LENGTH > 0 || L1_DATA_B_LENGTH > 0 + dcplb_tbl[i_d].addr = L1_DATA_A_START; + dcplb_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB; +#endif + icplb_tbl[i_i].addr = L1_CODE_START; + icplb_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB; + + first_mask_dcplb = i_d; + first_switched_dcplb = i_d + (1 << page_mask_order); + first_switched_icplb = i_i; + + while (i_d < MAX_CPLBS) + dcplb_tbl[i_d++].data = 0; + while (i_i < MAX_CPLBS) + icplb_tbl[i_i++].data = 0; +} diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c new file mode 100644 index 00000000000..c426a22f990 --- /dev/null +++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c @@ -0,0 +1,338 @@ +/* + * Blackfin CPLB exception handling. + * Copyright 2004-2007 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/module.h> +#include <linux/mm.h> + +#include <asm/blackfin.h> +#include <asm/cplbinit.h> +#include <asm/mmu_context.h> + +#ifdef CONFIG_BFIN_ICACHE + +#define FAULT_RW (1 << 16) +#define FAULT_USERSUPV (1 << 17) + +int page_mask_nelts; +int page_mask_order; +unsigned long *current_rwx_mask; + +int nr_dcplb_miss, nr_icplb_miss, nr_icplb_supv_miss, nr_dcplb_prot; +int nr_cplb_flush; + +static inline void disable_dcplb(void) +{ + unsigned long ctrl; + SSYNC(); + ctrl = bfin_read_DMEM_CONTROL(); + ctrl &= ~ENDCPLB; + bfin_write_DMEM_CONTROL(ctrl); + SSYNC(); +} + +static inline void enable_dcplb(void) +{ + unsigned long ctrl; + SSYNC(); + ctrl = bfin_read_DMEM_CONTROL(); + ctrl |= ENDCPLB; + bfin_write_DMEM_CONTROL(ctrl); + SSYNC(); +} + +static inline void disable_icplb(void) +{ + unsigned long ctrl; + SSYNC(); + ctrl = bfin_read_IMEM_CONTROL(); + ctrl &= ~ENICPLB; + bfin_write_IMEM_CONTROL(ctrl); + SSYNC(); +} + +static inline void enable_icplb(void) +{ + unsigned long ctrl; + SSYNC(); + ctrl = bfin_read_IMEM_CONTROL(); + ctrl |= ENICPLB; + bfin_write_IMEM_CONTROL(ctrl); + SSYNC(); +} + +/* + * Given the contents of the status register, return the index of the + * CPLB that caused the fault. + */ +static inline int faulting_cplb_index(int status) +{ + int signbits = __builtin_bfin_norm_fr1x32(status & 0xFFFF); + return 30 - signbits; +} + +/* + * Given the contents of the status register and the DCPLB_DATA contents, + * return true if a write access should be permitted. + */ +static inline int write_permitted(int status, unsigned long data) +{ + if (status & FAULT_USERSUPV) + return !!(data & CPLB_SUPV_WR); + else + return !!(data & CPLB_USER_WR); +} + +/* Counters to implement round-robin replacement. */ +static int icplb_rr_index, dcplb_rr_index; + +/* + * Find an ICPLB entry to be evicted and return its index. + */ +static int evict_one_icplb(void) +{ + int i; + for (i = first_switched_icplb; i < MAX_CPLBS; i++) + if ((icplb_tbl[i].data & CPLB_VALID) == 0) + return i; + i = first_switched_icplb + icplb_rr_index; + if (i >= MAX_CPLBS) { + i -= MAX_CPLBS - first_switched_icplb; + icplb_rr_index -= MAX_CPLBS - first_switched_icplb; + } + icplb_rr_index++; + return i; +} + +static int evict_one_dcplb(void) +{ + int i; + for (i = first_switched_dcplb; i < MAX_CPLBS; i++) + if ((dcplb_tbl[i].data & CPLB_VALID) == 0) + return i; + i = first_switched_dcplb + dcplb_rr_index; + if (i >= MAX_CPLBS) { + i -= MAX_CPLBS - first_switched_dcplb; + dcplb_rr_index -= MAX_CPLBS - first_switched_dcplb; + } + dcplb_rr_index++; + return i; +} + +static noinline int dcplb_miss(void) +{ + unsigned long addr = bfin_read_DCPLB_FAULT_ADDR(); + int status = bfin_read_DCPLB_STATUS(); + unsigned long *mask; + int idx; + unsigned long d_data; + + nr_dcplb_miss++; + if (addr >= _ramend) + return CPLB_PROT_VIOL; + + d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; +#ifdef CONFIG_BFIN_DCACHE + d_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; +#ifdef CONFIG_BLKFIN_WT + d_data |= CPLB_L1_AOW | CPLB_WT; +#endif +#endif + mask = current_rwx_mask; + if (mask) { + int page = addr >> PAGE_SHIFT; + int offs = page >> 5; + int bit = 1 << (page & 31); + + if (mask[offs] & bit) + d_data |= CPLB_USER_RD; + + mask += page_mask_nelts; + if (mask[offs] & bit) + d_data |= CPLB_USER_WR; + } + + idx = evict_one_dcplb(); + + addr &= PAGE_MASK; + dcplb_tbl[idx].addr = addr; + dcplb_tbl[idx].data = d_data; + + disable_dcplb(); + bfin_write32(DCPLB_DATA0 + idx * 4, d_data); + bfin_write32(DCPLB_ADDR0 + idx * 4, addr); + enable_dcplb(); + + return 0; +} + +static noinline int icplb_miss(void) +{ + unsigned long addr = bfin_read_ICPLB_FAULT_ADDR(); + int status = bfin_read_ICPLB_STATUS(); + int idx; + unsigned long i_data; + + nr_icplb_miss++; + if (status & FAULT_USERSUPV) + nr_icplb_supv_miss++; + + if (addr >= _ramend) + return CPLB_PROT_VIOL; + + /* + * First, try to find a CPLB that matches this address. If we + * find one, then the fact that we're in the miss handler means + * that the instruction crosses a page boundary. + */ + for (idx = first_switched_icplb; idx < MAX_CPLBS; idx++) { + if (icplb_tbl[idx].data & CPLB_VALID) { + unsigned long this_addr = icplb_tbl[idx].addr; + if (this_addr <= addr && this_addr + PAGE_SIZE > addr) { + addr += PAGE_SIZE; + break; + } + } + } + + i_data = CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4KB; +#ifdef CONFIG_BFIN_ICACHE + i_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; +#endif + + /* + * Two cases to distinguish - a supervisor access must necessarily + * be for a module page; we grant it unconditionally (could do better + * here in the future). Otherwise, check the x bitmap of the current + * process. + */ + if (!(status & FAULT_USERSUPV)) { + unsigned long *mask = current_rwx_mask; + + if (mask) { + int page = addr >> PAGE_SHIFT; + int offs = page >> 5; + int bit = 1 << (page & 31); + + mask += 2 * page_mask_nelts; + if (mask[offs] & bit) + i_data |= CPLB_USER_RD; + } + } + + idx = evict_one_icplb(); + addr &= PAGE_MASK; + icplb_tbl[idx].addr = addr; + icplb_tbl[idx].data = i_data; + + disable_icplb(); + bfin_write32(ICPLB_DATA0 + idx * 4, i_data); + bfin_write32(ICPLB_ADDR0 + idx * 4, addr); + enable_icplb(); + + return 0; +} + +static noinline int dcplb_protection_fault(void) +{ + unsigned long addr = bfin_read_DCPLB_FAULT_ADDR(); + int status = bfin_read_DCPLB_STATUS(); + + nr_dcplb_prot++; + + if (status & FAULT_RW) { + int idx = faulting_cplb_index(status); + unsigned long data = dcplb_tbl[idx].data; + if (!(data & CPLB_WT) && !(data & CPLB_DIRTY) && + write_permitted(status, data)) { + data |= CPLB_DIRTY; + dcplb_tbl[idx].data = data; + bfin_write32(DCPLB_DATA0 + idx * 4, data); + return 0; + } + } + return CPLB_PROT_VIOL; +} + +int cplb_hdr(int seqstat, struct pt_regs *regs) +{ + int cause = seqstat & 0x3f; + switch (cause) { + case 0x23: + return dcplb_protection_fault(); + case 0x2C: + return icplb_miss(); + case 0x26: + return dcplb_miss(); + default: + return 1; + panic_cplb_error(seqstat, regs); + } +} + +void flush_switched_cplbs(void) +{ + int i; + + nr_cplb_flush++; + + disable_icplb(); + for (i = first_switched_icplb; i < MAX_CPLBS; i++) { + icplb_tbl[i].data = 0; + bfin_write32(ICPLB_DATA0 + i * 4, 0); + } + enable_icplb(); + + disable_dcplb(); + for (i = first_mask_dcplb; i < MAX_CPLBS; i++) { + dcplb_tbl[i].data = 0; + bfin_write32(DCPLB_DATA0 + i * 4, 0); + } + enable_dcplb(); +} + +void set_mask_dcplbs(unsigned long *masks) +{ + int i; + unsigned long addr = (unsigned long)masks; + unsigned long d_data; + current_rwx_mask = masks; + + if (!masks) + return; + + d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; +#ifdef CONFIG_BFIN_DCACHE + d_data |= CPLB_L1_CHBL; +#ifdef CONFIG_BLKFIN_WT + d_data |= CPLB_L1_AOW | CPLB_WT; +#endif +#endif + + disable_dcplb(); + for (i = first_mask_dcplb; i < first_switched_dcplb; i++) { + dcplb_tbl[i].addr = addr; + dcplb_tbl[i].data = d_data; + bfin_write32(DCPLB_DATA0 + i * 4, d_data); + bfin_write32(DCPLB_ADDR0 + i * 4, addr); + addr += PAGE_SIZE; + } + enable_dcplb(); +} + +#endif diff --git a/arch/blackfin/kernel/cplb-nompu/Makefile b/arch/blackfin/kernel/cplb-nompu/Makefile new file mode 100644 index 00000000000..d36ea9b5382 --- /dev/null +++ b/arch/blackfin/kernel/cplb-nompu/Makefile @@ -0,0 +1,8 @@ +# +# arch/blackfin/kernel/cplb-nompu/Makefile +# + +obj-y := cplbinit.o cacheinit.o cplbhdlr.o cplbmgr.o + +obj-$(CONFIG_CPLB_INFO) += cplbinfo.o + diff --git a/arch/blackfin/kernel/cacheinit.c b/arch/blackfin/kernel/cplb-nompu/cacheinit.c index 62cbba7364b..8a18399f607 100644 --- a/arch/blackfin/kernel/cacheinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cacheinit.c @@ -42,6 +42,7 @@ void bfin_icache_init(void) ctrl = bfin_read_IMEM_CONTROL(); ctrl |= IMC | ENICPLB; bfin_write_IMEM_CONTROL(ctrl); + SSYNC(); } #endif @@ -63,5 +64,6 @@ void bfin_dcache_init(void) ctrl = bfin_read_DMEM_CONTROL(); ctrl |= DMEM_CNTR; bfin_write_DMEM_CONTROL(ctrl); + SSYNC(); } #endif diff --git a/arch/blackfin/mach-common/cplbhdlr.S b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S index 2788532de72..2788532de72 100644 --- a/arch/blackfin/mach-common/cplbhdlr.S +++ b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S diff --git a/arch/blackfin/mach-common/cplbinfo.c b/arch/blackfin/kernel/cplb-nompu/cplbinfo.c index a4f0b428a34..a4f0b428a34 100644 --- a/arch/blackfin/mach-common/cplbinfo.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinfo.c diff --git a/arch/blackfin/kernel/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 6320bc45fbb..6320bc45fbb 100644 --- a/arch/blackfin/kernel/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c diff --git a/arch/blackfin/mach-common/cplbmgr.S b/arch/blackfin/kernel/cplb-nompu/cplbmgr.S index 6f909cbfac7..f5cf3accef3 100644 --- a/arch/blackfin/mach-common/cplbmgr.S +++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.S @@ -75,6 +75,15 @@ ENTRY(_cplb_mgr) * from the configuration table. */ + /* A multi-word instruction can cross a page boundary. This means the + * first part of the instruction can be in a valid page, but the + * second part is not, and hence generates the instruction miss. + * However, the fault address is for the start of the instruction, + * not the part that's in the bad page. Therefore, we have to check + * whether the fault address applies to a page that is already present + * in the table. + */ + P4.L = LO(ICPLB_FAULT_ADDR); P4.H = HI(ICPLB_FAULT_ADDR); @@ -87,7 +96,7 @@ ENTRY(_cplb_mgr) R4 = [P4]; /* Get faulting address*/ R6 = 64; /* Advance past the fault address, which*/ R6 = R6 + R4; /* we'll use if we find a match*/ - R3 = ((16 << 8) | 2); /* Extract mask, bits 16 and 17.*/ + R3 = ((16 << 8) | 2); /* Extract mask, two bits at posn 16 */ R5 = 0; .Lisearch: @@ -125,7 +134,9 @@ ENTRY(_cplb_mgr) P4.L = LO(IMEM_CONTROL); P4.H = HI(IMEM_CONTROL); - /* disable cplbs */ + /* Turn off CPLBs while we work, necessary according to HRM before + * modifying CPLB descriptors + */ R5 = [P4]; /* Control Register*/ BITCLR(R5,ENICPLB_P); CLI R1; @@ -179,7 +190,14 @@ ENTRY(_cplb_mgr) [P0 - 4] = R0; R0 = [P0 - 0x100]; [P0-0x104] = R0; -.Lie_move:P0+=4; +.Lie_move: + P0+=4; + + /* Clear ICPLB_DATA15, in case we don't find a replacement + * otherwise, we would have a duplicate entry, and will crash + */ + R0 = 0; + [P0 - 4] = R0; /* We've made space in the ICPLB table, so that ICPLB15 * is now free to be overwritten. Next, we have to determine @@ -504,14 +522,23 @@ ENTRY(_cplb_mgr) R0 = [P0++]; /* move data */ [P0 - 8] = R0; R0 = [P0-0x104] /* move address */ -.Lde_move: [P0-0x108] = R0; +.Lde_move: + [P0-0x108] = R0; + +.Lde_moved: + NOP; + + /* Clear DCPLB_DATA15, in case we don't find a replacement + * otherwise, we would have a duplicate entry, and will crash + */ + R0 = 0; + [P0 - 0x4] = R0; /* We've now made space in DCPLB15 for the new CPLB to be * installed. The next stage is to locate a CPLB in the * config table that covers the faulting address. */ -.Lde_moved:NOP; R0 = I0; /* Our faulting address */ P2.L = _dpdt_table; diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c index 724f4a5a1d4..60f67f90fe3 100644 --- a/arch/blackfin/kernel/early_printk.c +++ b/arch/blackfin/kernel/early_printk.c @@ -187,7 +187,7 @@ asmlinkage void __init init_early_exception_vectors(void) bfin_write_EVT15(early_trap); CSYNC(); - /* Set all the return from interupt, exception, NMI to a known place + /* Set all the return from interrupt, exception, NMI to a known place * so if we do a RETI, RETX or RETN by mistake - we go somewhere known * Note - don't change RETS - we are in a subroutine, or * RETE - since it might screw up if emulator is attached @@ -205,7 +205,7 @@ asmlinkage void __init early_trap_c(struct pt_regs *fp, void *retaddr) if (likely(early_console == NULL)) setup_early_printk(DEFAULT_EARLY_PORT); - dump_bfin_mem((void *)fp->retx); + dump_bfin_mem(fp); show_regs(fp); dump_bfin_trace_buffer(); diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 5bf15125f0d..023dc80af18 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -39,9 +39,6 @@ #include <asm/blackfin.h> #include <asm/fixed_code.h> -#define LED_ON 0 -#define LED_OFF 1 - asmlinkage void ret_from_fork(void); /* Points to the SDRAM backup memory for the stack that is currently in @@ -70,32 +67,6 @@ void (*pm_power_off)(void) = NULL; EXPORT_SYMBOL(pm_power_off); /* - * We are using a different LED from the one used to indicate timer interrupt. - */ -#if defined(CONFIG_BFIN_IDLE_LED) -static inline void leds_switch(int flag) -{ - unsigned short tmp = 0; - - tmp = bfin_read_CONFIG_BFIN_IDLE_LED_PORT(); - SSYNC(); - - if (flag == LED_ON) - tmp &= ~CONFIG_BFIN_IDLE_LED_PIN; /* light on */ - else - tmp |= CONFIG_BFIN_IDLE_LED_PIN; /* light off */ - - bfin_write_CONFIG_BFIN_IDLE_LED_PORT(tmp); - SSYNC(); - -} -#else -static inline void leds_switch(int flag) -{ -} -#endif - -/* * The idle loop on BFIN */ #ifdef CONFIG_IDLE_L1 @@ -106,12 +77,10 @@ void cpu_idle(void)__attribute__((l1_text)); void default_idle(void) { while (!need_resched()) { - leds_switch(LED_OFF); local_irq_disable(); if (likely(!need_resched())) idle_with_irq_disabled(); local_irq_enable(); - leds_switch(LED_ON); } } @@ -327,6 +296,7 @@ void finish_atomic_sections (struct pt_regs *regs) } #if defined(CONFIG_ACCESS_CHECK) +/* Return 1 if access to memory range is OK, 0 otherwise */ int _access_ok(unsigned long addr, unsigned long size) { if (size == 0) diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c index ae28aac6fec..483f93dfc1b 100644 --- a/arch/blackfin/kernel/reboot.c +++ b/arch/blackfin/kernel/reboot.c @@ -19,6 +19,11 @@ #define SYSCR_VAL 0x10 #endif +/* + * Delay min 5 SCLK cycles using worst case CCLK/SCLK ratio (15) + */ +#define SWRST_DELAY (5 * 15) + /* A system soft reset makes external memory unusable * so force this function into L1. */ @@ -34,7 +39,13 @@ void bfin_reset(void) while (1) { /* initiate system soft reset with magic 0x7 */ bfin_write_SWRST(0x7); - asm("ssync;"); + + /* Wait for System reset to actually reset, needs to be 5 SCLKs, */ + /* Assume CCLK / SCLK ratio is worst case (15), and use 5*15 */ + + asm("LSETUP(.Lfoo,.Lfoo) LC0 = %0\n .Lfoo: NOP;\n" + : : "a" (SWRST_DELAY) : "LC0", "LT0", "LB0"); + /* clear system soft reset */ bfin_write_SWRST(0); asm("ssync;"); diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index d2822010b7c..462cae89375 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -238,7 +238,13 @@ void __init setup_arch(char **cmdline_p) memory_end = _ramend - DMA_UNCACHED_REGION; _ramstart = (unsigned long)__bss_stop; + _rambase = (unsigned long)_stext; +#ifdef CONFIG_MPU + /* Round up to multiple of 4MB. */ + memory_start = (_ramstart + 0x3fffff) & ~0x3fffff; +#else memory_start = PAGE_ALIGN(_ramstart); +#endif #if defined(CONFIG_MTD_UCLINUX) /* generic memory mapped MTD driver */ @@ -307,6 +313,11 @@ void __init setup_arch(char **cmdline_p) printk(KERN_NOTICE "Warning: limiting memory to %liMB due to hardware anomaly 05000263\n", memory_end >> 20); #endif /* ANOMALY_05000263 */ +#ifdef CONFIG_MPU + page_mask_nelts = ((_ramend >> PAGE_SHIFT) + 31) / 32; + page_mask_order = get_order(3 * page_mask_nelts * sizeof(long)); +#endif + #if !defined(CONFIG_MTD_UCLINUX) memory_end -= SIZE_4K; /*In case there is no valid CPLB behind memory_end make sure we don't get to close*/ #endif @@ -315,8 +326,6 @@ void __init setup_arch(char **cmdline_p) init_mm.end_data = (unsigned long)_edata; init_mm.brk = (unsigned long)0; - init_leds(); - _bfin_swrst = bfin_read_SWRST(); if (_bfin_swrst & RESET_DOUBLE) diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c index beef057bd1d..5bd64e341df 100644 --- a/arch/blackfin/kernel/time.c +++ b/arch/blackfin/kernel/time.c @@ -42,75 +42,6 @@ static void time_sched_init(irqreturn_t(*timer_routine) (int, void *)); static unsigned long gettimeoffset(void); -static inline void do_leds(void); - -#if (defined(CONFIG_BFIN_ALIVE_LED) || defined(CONFIG_BFIN_IDLE_LED)) -void __init init_leds(void) -{ - unsigned int tmp = 0; - -#if defined(CONFIG_BFIN_ALIVE_LED) - /* config pins as output. */ - tmp = bfin_read_CONFIG_BFIN_ALIVE_LED_DPORT(); - SSYNC(); - bfin_write_CONFIG_BFIN_ALIVE_LED_DPORT(tmp | CONFIG_BFIN_ALIVE_LED_PIN); - SSYNC(); - - /* First set led be off */ - tmp = bfin_read_CONFIG_BFIN_ALIVE_LED_PORT(); - SSYNC(); - bfin_write_CONFIG_BFIN_ALIVE_LED_PORT(tmp | CONFIG_BFIN_ALIVE_LED_PIN); /* light off */ - SSYNC(); -#endif - -#if defined(CONFIG_BFIN_IDLE_LED) - /* config pins as output. */ - tmp = bfin_read_CONFIG_BFIN_IDLE_LED_DPORT(); - SSYNC(); - bfin_write_CONFIG_BFIN_IDLE_LED_DPORT(tmp | CONFIG_BFIN_IDLE_LED_PIN); - SSYNC(); - - /* First set led be off */ - tmp = bfin_read_CONFIG_BFIN_IDLE_LED_PORT(); - SSYNC(); - bfin_write_CONFIG_BFIN_IDLE_LED_PORT(tmp | CONFIG_BFIN_IDLE_LED_PIN); /* light off */ - SSYNC(); -#endif -} -#else -void __init init_leds(void) -{ -} -#endif - -#if defined(CONFIG_BFIN_ALIVE_LED) -static inline void do_leds(void) -{ - static unsigned int count = 50; - static int flag; - unsigned short tmp = 0; - - if (--count == 0) { - count = 50; - flag = ~flag; - } - tmp = bfin_read_CONFIG_BFIN_ALIVE_LED_PORT(); - SSYNC(); - - if (flag) - tmp &= ~CONFIG_BFIN_ALIVE_LED_PIN; /* light on */ - else - tmp |= CONFIG_BFIN_ALIVE_LED_PIN; /* light off */ - - bfin_write_CONFIG_BFIN_ALIVE_LED_PORT(tmp); - SSYNC(); - -} -#else -static inline void do_leds(void) -{ -} -#endif static struct irqaction bfin_timer_irq = { .name = "BFIN Timer Tick", @@ -205,7 +136,6 @@ irqreturn_t timer_interrupt(int irq, void *dummy) write_seqlock(&xtime_lock); do_timer(1); - do_leds(); #ifndef CONFIG_SMP update_process_times(user_mode(get_irq_regs())); diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 21a55ef19cb..66b5f3e3ae2 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -36,8 +36,10 @@ #include <asm/cacheflush.h> #include <asm/blackfin.h> #include <asm/irq_handler.h> +#include <linux/irq.h> #include <asm/trace.h> #include <asm/fixed_code.h> +#include <asm/dma.h> #ifdef CONFIG_KGDB # include <linux/debugger.h> @@ -170,7 +172,7 @@ asmlinkage void double_fault_c(struct pt_regs *fp) oops_in_progress = 1; printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n"); dump_bfin_process(fp); - dump_bfin_mem((void *)fp->retx); + dump_bfin_mem(fp); show_regs(fp); panic("Double Fault - unrecoverable event\n"); @@ -195,9 +197,13 @@ asmlinkage void trap_c(struct pt_regs *fp) * we will kernel panic, so the system reboots. * If KGDB is enabled, don't set this for kernel breakpoints */ - if ((bfin_read_IPEND() & 0xFFC0) + + /* TODO: check to see if we are in some sort of deferred HWERR + * that we should be able to recover from, not kernel panic + */ + if ((bfin_read_IPEND() & 0xFFC0) && (trapnr != VEC_STEP) #ifdef CONFIG_KGDB - && trapnr != VEC_EXCPT02 + && (trapnr != VEC_EXCPT02) #endif ){ console_verbose(); @@ -433,6 +439,36 @@ asmlinkage void trap_c(struct pt_regs *fp) /* 0x3D - Reserved, Caught by default */ /* 0x3E - Reserved, Caught by default */ /* 0x3F - Reserved, Caught by default */ + case VEC_HWERR: + info.si_code = BUS_ADRALN; + sig = SIGBUS; + switch (fp->seqstat & SEQSTAT_HWERRCAUSE) { + /* System MMR Error */ + case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR): + info.si_code = BUS_ADRALN; + sig = SIGBUS; + printk(KERN_NOTICE HWC_x2(KERN_NOTICE)); + break; + /* External Memory Addressing Error */ + case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR): + info.si_code = BUS_ADRERR; + sig = SIGBUS; + printk(KERN_NOTICE HWC_x3(KERN_NOTICE)); + break; + /* Performance Monitor Overflow */ + case (SEQSTAT_HWERRCAUSE_PERF_FLOW): + printk(KERN_NOTICE HWC_x12(KERN_NOTICE)); + break; + /* RAISE 5 instruction */ + case (SEQSTAT_HWERRCAUSE_RAISE_5): + printk(KERN_NOTICE HWC_x18(KERN_NOTICE)); + break; + default: /* Reserved */ + printk(KERN_NOTICE HWC_default(KERN_NOTICE)); + break; + } + CHK_DEBUGGER_TRAP(); + break; default: info.si_code = TRAP_ILLTRAP; sig = SIGTRAP; @@ -447,7 +483,7 @@ asmlinkage void trap_c(struct pt_regs *fp) if (sig != SIGTRAP) { unsigned long stack; dump_bfin_process(fp); - dump_bfin_mem((void *)fp->retx); + dump_bfin_mem(fp); show_regs(fp); /* Print out the trace buffer if it makes sense */ @@ -461,6 +497,7 @@ asmlinkage void trap_c(struct pt_regs *fp) dump_bfin_trace_buffer(); show_stack(current, &stack); if (oops_in_progress) { + print_modules(); #ifndef CONFIG_ACCESS_CHECK printk(KERN_EMERG "Please turn on " "CONFIG_ACCESS_CHECK\n"); @@ -474,13 +511,6 @@ asmlinkage void trap_c(struct pt_regs *fp) info.si_addr = (void *)fp->pc; force_sig_info(sig, &info, current); - /* Ensure that bad return addresses don't end up in an infinite - * loop, due to speculative loads/reads. This needs to be done after - * the signal has been sent. - */ - if (trapnr == VEC_CPLB_I_M && sig != SIGTRAP) - fp->pc = SAFE_USER_INSTRUCTION; - trace_buffer_restore(j); return; } @@ -616,8 +646,10 @@ void dump_bfin_process(struct pt_regs *fp) if (oops_in_progress) printk(KERN_EMERG "Kernel OOPS in progress\n"); - if (context & 0x0020) - printk(KERN_NOTICE "Deferred excecption or HW Error context\n"); + if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) + printk(KERN_NOTICE "HW Error context\n"); + else if (context & 0x0020) + printk(KERN_NOTICE "Defered Exception context\n"); else if (context & 0x3FC0) printk(KERN_NOTICE "Interrupt context\n"); else if (context & 0x4000) @@ -645,59 +677,124 @@ void dump_bfin_process(struct pt_regs *fp) "No Valid process in current context\n"); } -void dump_bfin_mem(void *retaddr) +void dump_bfin_mem(struct pt_regs *fp) { + unsigned short *addr, *erraddr, val = 0, err = 0; + char sti = 0, buf[6]; - if (retaddr >= (void *)FIXED_CODE_START && retaddr < (void *)physical_mem_end -#if L1_CODE_LENGTH != 0 - /* FIXME: Copy the code out of L1 Instruction SRAM through dma - memcpy. */ - && !(retaddr >= (void *)L1_CODE_START - && retaddr < (void *)(L1_CODE_START + L1_CODE_LENGTH)) -#endif - ) { - int i = ((unsigned int)retaddr & 0xFFFFFFF0) - 32; - unsigned short x = 0; - printk(KERN_NOTICE "return address: [0x%p]; contents of:", retaddr); - for (; i < ((unsigned int)retaddr & 0xFFFFFFF0) + 32; i += 2) { - if (!(i & 0xF)) - printk("\n" KERN_NOTICE "0x%08x: ", i); - - if (get_user(x, (unsigned short *)i)) - break; + if (unlikely((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR)) + erraddr = (void *)fp->pc; + else + erraddr = (void *)fp->retx; + + printk(KERN_NOTICE "return address: [0x%p]; contents of:", erraddr); + + for (addr = (unsigned short *)((unsigned long)erraddr & ~0xF) - 0x10; + addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10; + addr++) { + if (!((unsigned long)addr & 0xF)) + printk("\n" KERN_NOTICE "0x%p: ", addr); + + if (get_user(val, addr)) { + if (addr >= (unsigned short *)L1_CODE_START && + addr < (unsigned short *)(L1_CODE_START + L1_CODE_LENGTH)) { + dma_memcpy(&val, addr, sizeof(val)); + sprintf(buf, "%04x", val); + } else if (addr >= (unsigned short *)FIXED_CODE_START && + addr <= (unsigned short *)memory_start) { + val = bfin_read16(addr); + sprintf(buf, "%04x", val); + } else { + val = 0; + sprintf(buf, "????"); + } + } else + sprintf(buf, "%04x", val); + + if (addr == erraddr) { + printk("[%s]", buf); + err = val; + } else + printk(" %s ", buf); + + /* Do any previous instructions turn on interrupts? */ + if (addr <= erraddr && /* in the past */ + ((val >= 0x0040 && val <= 0x0047) || /* STI instruction */ + val == 0x017b)) /* [SP++] = RETI */ + sti = 1; + } + + printk("\n"); + + /* Hardware error interrupts can be deferred */ + if (unlikely(sti && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR && + oops_in_progress)){ + printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n"); #ifndef CONFIG_DEBUG_HWERR - /* If one of the last few instructions was a STI - * it is likely that the error occured awhile ago - * and we just noticed. This only happens in kernel - * context, which should mean an oops is happening - */ - if (oops_in_progress && x >= 0x0040 && x <= 0x0047 && i <= 0) - panic("\n\nWARNING : You should reconfigure" - " the kernel to turn on\n" - " 'Hardware error interrupt" - " debugging'\n" - " The rest of this error" - " is meanless\n"); -#endif - if (i == (unsigned int)retaddr) - printk("[%04x]", x); - else - printk(" %04x ", x); + printk(KERN_NOTICE "The remaining message may be meaningless\n" + KERN_NOTICE "You should enable CONFIG_DEBUG_HWERR to get a" + " better idea where it came from\n"); +#else + /* If we are handling only one peripheral interrupt + * and current mm and pid are valid, and the last error + * was in that user space process's text area + * print it out - because that is where the problem exists + */ + if ((!(((fp)->ipend & ~0x30) & (((fp)->ipend & ~0x30) - 1))) && + (current->pid && current->mm)) { + /* And the last RETI points to the current userspace context */ + if ((fp + 1)->pc >= current->mm->start_code && + (fp + 1)->pc <= current->mm->end_code) { + printk(KERN_NOTICE "It might be better to look around here : \n"); + printk(KERN_NOTICE "-------------------------------------------\n"); + show_regs(fp + 1); + printk(KERN_NOTICE "-------------------------------------------\n"); + } } - printk("\n"); - } else - printk("\n" KERN_NOTICE - "Cannot look at the [PC] <%p> for it is" - " in unreadable memory - sorry\n", retaddr); +#endif + } } void show_regs(struct pt_regs *fp) { char buf [150]; + struct irqaction *action; + unsigned int i; + unsigned long flags; - printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\n"); + printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted()); printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", (long)fp->seqstat, fp->ipend, fp->syscfg); + printk(KERN_NOTICE " HWERRCAUSE: 0x%lx\n", + (fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14); + printk(KERN_NOTICE " EXCAUSE : 0x%lx\n", + fp->seqstat & SEQSTAT_EXCAUSE); + for (i = 6; i <= 15 ; i++) { + if (fp->ipend & (1 << i)) { + decode_address(buf, bfin_read32(EVT0 + 4*i)); + printk(KERN_NOTICE " physical IVG%i asserted : %s\n", i, buf); + } + } + + /* if no interrupts are going off, don't print this out */ + if (fp->ipend & ~0x3F) { + for (i = 0; i < (NR_IRQS - 1); i++) { + spin_lock_irqsave(&irq_desc[i].lock, flags); + action = irq_desc[i].action; + if (!action) + goto unlock; + + decode_address(buf, (unsigned int)action->handler); + printk(KERN_NOTICE " logical irq %3d mapped : %s", i, buf); + for (action = action->next; action; action = action->next) { + decode_address(buf, (unsigned int)action->handler); + printk(", %s", buf); + } + printk("\n"); +unlock: + spin_unlock_irqrestore(&irq_desc[i].lock, flags); + } + } decode_address(buf, fp->rete); printk(KERN_NOTICE " RETE: %s\n", buf); @@ -708,9 +805,10 @@ void show_regs(struct pt_regs *fp) decode_address(buf, fp->rets); printk(KERN_NOTICE " RETS: %s\n", buf); decode_address(buf, fp->pc); - printk(KERN_NOTICE " PC: %s\n", buf); + printk(KERN_NOTICE " PC : %s\n", buf); - if ((long)fp->seqstat & SEQSTAT_EXCAUSE) { + if (((long)fp->seqstat & SEQSTAT_EXCAUSE) && + (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) { decode_address(buf, bfin_read_DCPLB_FAULT_ADDR()); printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf); decode_address(buf, bfin_read_ICPLB_FAULT_ADDR()); @@ -824,7 +922,7 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp) printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void *)bfin_read_DCPLB_FAULT_ADDR()); printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void *)bfin_read_ICPLB_FAULT_ADDR()); dump_bfin_process(fp); - dump_bfin_mem((void *)fp->retx); + dump_bfin_mem(fp); show_regs(fp); dump_stack(); panic("Unrecoverable event\n"); diff --git a/arch/blackfin/lib/memcpy.S b/arch/blackfin/lib/memcpy.S index 2e6336492b4..e654a18a075 100644 --- a/arch/blackfin/lib/memcpy.S +++ b/arch/blackfin/lib/memcpy.S @@ -70,8 +70,8 @@ ENTRY(_memcpy) /* Check for aligned data.*/ R3 = R1 | R0; - R0 = 0x3; - R3 = R3 & R0; + R1 = 0x3; + R3 = R3 & R1; CC = R3; /* low bits set on either address? */ IF CC JUMP .Lnot_aligned; @@ -83,7 +83,6 @@ ENTRY(_memcpy) /* less than eight bytes... */ P2 = R2; LSETUP(.Lthree_start, .Lthree_end) LC0=P2; - R0 = R1; /* setup src address for return */ .Lthree_start: R3 = B[P1++] (X); .Lthree_end: @@ -95,7 +94,6 @@ ENTRY(_memcpy) /* There's at least eight bytes to copy. */ P2 += -1; /* because we unroll one iteration */ LSETUP(.Lword_loops, .Lword_loope) LC0=P2; - R0 = R1; I1 = P1; R3 = [I1++]; #if ANOMALY_05000202 @@ -120,7 +118,6 @@ ENTRY(_memcpy) .Lnot_aligned: /* From here, we're copying byte-by-byte. */ LSETUP (.Lbyte_start, .Lbyte_end) LC0=P2; - R0 = R1; /* Save src address for return */ .Lbyte_start: R1 = B[P1++] (X); .Lbyte_end: @@ -135,7 +132,6 @@ ENTRY(_memcpy) * Don't bother to work out alignment for * the reverse case. */ - R0 = R1; /* save src for later. */ P0 = P0 + P2; P0 += -1; P1 = P1 + P2; diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig index 5c736837d4b..3cde4beeb21 100644 --- a/arch/blackfin/mach-bf527/Kconfig +++ b/arch/blackfin/mach-bf527/Kconfig @@ -43,7 +43,7 @@ endchoice choice prompt "UART1" - default BF527_UART1_PORTG + default BF527_UART1_PORTF help Select PORT used for UART1. See Hardware Reference Manual diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 003e2ac654d..f8c411a24af 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -8,7 +8,7 @@ * * Modified: * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2007 Analog Devices Inc. + * Copyright 2004-2008 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -41,6 +41,7 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/usb/sl811.h> +#include <linux/usb/musb.h> #include <asm/cplb.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> @@ -105,6 +106,69 @@ void __exit bfin_isp1761_exit(void) arch_initcall(bfin_isp1761_init); #endif +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +static struct resource musb_resources[] = { + [0] = { + .start = 0xffc03800, + .end = 0xffc03cff, + .flags = IORESOURCE_MEM, + }, + [1] = { /* general IRQ */ + .start = IRQ_USB_INT0, + .end = IRQ_USB_INT0, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, + [2] = { /* DMA IRQ */ + .start = IRQ_USB_DMA, + .end = IRQ_USB_DMA, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct musb_hdrc_platform_data musb_plat = { +#if defined(CONFIG_USB_MUSB_OTG) + .mode = MUSB_OTG, +#elif defined(CONFIG_USB_MUSB_HDRC_HCD) + .mode = MUSB_HOST, +#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) + .mode = MUSB_PERIPHERAL, +#endif + .multipoint = 0, +}; + +static u64 musb_dmamask = ~(u32)0; + +static struct platform_device musb_device = { + .name = "musb_hdrc", + .id = 0, + .dev = { + .dma_mask = &musb_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &musb_plat, + }, + .num_resources = ARRAY_SIZE(musb_resources), + .resource = musb_resources, +}; +#endif + +#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE) + +static struct resource bf52x_t350mcqb_resources[] = { + { + .start = IRQ_PPI_ERROR, + .end = IRQ_PPI_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bf52x_t350mcqb_device = { + .name = "bfin-t350mcqb", + .id = -1, + .num_resources = ARRAY_SIZE(bf52x_t350mcqb_resources), + .resource = bf52x_t350mcqb_resources, +}; +#endif + #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) static struct mtd_partition partition_info[] = { { @@ -253,12 +317,7 @@ static struct resource sl811_hcd_resources[] = { void sl811_port_power(struct device *dev, int is_on) { gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); - gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); - - if (is_on) - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); - else - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); } #endif @@ -718,6 +777,28 @@ static struct platform_device bfin_pata_device = { }; #endif +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) &bf5xx_nand_device, @@ -739,6 +820,10 @@ static struct platform_device *stamp_devices[] __initdata = { &isp1362_hcd_device, #endif +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) + &musb_device, +#endif + #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, #endif @@ -763,6 +848,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_fb_device, #endif +#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE) + &bf52x_t350mcqb_device, +#endif + #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) &bfin_fb_adv7393_device, #endif @@ -783,6 +872,10 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif }; static int __init stamp_init(void) diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 6bcf4047f89..a72c7a620fa 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -40,6 +40,7 @@ #endif #include <linux/pata_platform.h> #include <linux/irq.h> + #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/reboot.h> @@ -303,7 +304,77 @@ static struct platform_device bfin_uart_device = { }; #endif -static struct platform_device *stamp_devices[] __initdata = { +#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) + +#include <linux/serial_8250.h> +#include <linux/serial.h> + +/* + * Configuration for two 16550 UARTS in FPGA at addresses 0x20200000 and 0x202000010. + * running at half system clock, both with interrupt output or-ed to PF8. Change to + * suit different FPGA configuration, or to suit real 16550 UARTS connected to the bus + */ + +static struct plat_serial8250_port serial8250_platform_data [] = { + { + .membase = 0x20200000, + .mapbase = 0x20200000, + .irq = IRQ_PF8, + .flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE, + .iotype = UPIO_MEM, + .regshift = 1, + .uartclk = 66666667, + }, { + .membase = 0x20200010, + .mapbase = 0x20200010, + .irq = IRQ_PF8, + .flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE, + .iotype = UPIO_MEM, + .regshift = 1, + .uartclk = 66666667, + }, { + } +}; + +static struct platform_device serial8250_device = { + .id = PLAT8250_DEV_PLATFORM, + .name = "serial8250", + .dev = { + .platform_data = serial8250_platform_data, + }, +}; + +#endif + +#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE) + +/* + * Configuration for one OpenCores keyboard controller in FPGA at address 0x20200030, + * interrupt output wired to PF9. Change to suit different FPGA configuration + */ + +static struct resource opencores_kbd_resources[] = { + [0] = { + .start = 0x20200030, + .end = 0x20300030 + 2, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PF9, + .end = IRQ_PF9, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, +}; + +static struct platform_device opencores_kbd_device = { + .id = -1, + .name = "opencores-kbd", + .resource = opencores_kbd_resources, + .num_resources = ARRAY_SIZE(opencores_kbd_resources), +}; +#endif + +static struct platform_device *h8606_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, #endif @@ -327,13 +398,21 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif + +#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) + &serial8250_device, +#endif + +#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE) + &opencores_kbd_device, +#endif }; static int __init H8606_init(void) { printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n"); printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); - platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); + platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index be852034a68..c37dd45c880 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -256,6 +256,50 @@ static struct platform_device bfin_pata_device = { }; #endif +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PF7, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PF8, 1, "gpio-keys: BTN1"}, + {BTN_2, GPIO_PF9, 1, "gpio-keys: BTN2"}, + {BTN_3, GPIO_PF10, 1, "gpio-keys: BTN3"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#include <linux/i2c-gpio.h> + +static struct i2c_gpio_platform_data i2c_gpio_data = { + .sda_pin = 1, + .scl_pin = 0, + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .udelay = 40, +}; + +static struct platform_device i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &i2c_gpio_data, + }, +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, @@ -280,6 +324,14 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif + +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) + &i2c_gpio_device, +#endif }; static int __init ezkit_init(void) diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 8fde8d83285..ac52b040b33 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -32,6 +32,7 @@ #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) @@ -108,6 +109,50 @@ static struct platform_device net2272_bfin_device = { }; #endif +static struct mtd_partition stamp_partitions[] = { + { + .name = "Bootloader", + .size = 0x20000, + .offset = 0, + }, { + .name = "Kernel", + .size = 0xE0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "RootFS", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data stamp_flash_data = { + .width = 2, + .parts = stamp_partitions, + .nr_parts = ARRAY_SIZE(stamp_partitions), +}; + +static struct resource stamp_flash_resource[] = { + { + .name = "cfi_probe", + .start = 0x20000000, + .end = 0x203fffff, + .flags = IORESOURCE_MEM, + }, { + .start = CONFIG_ENET_FLASH_PIN, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device stamp_flash_device = { + .name = "BF5xx-Flash", + .id = 0, + .dev = { + .platform_data = &stamp_flash_data, + }, + .num_resources = ARRAY_SIZE(stamp_flash_resource), + .resource = stamp_flash_resource, +}; + #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ @@ -373,6 +418,49 @@ static struct platform_device bfin_pata_device = { }; #endif +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PF5, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PF6, 1, "gpio-keys: BTN1"}, + {BTN_2, GPIO_PF8, 1, "gpio-keys: BTN2"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#include <linux/i2c-gpio.h> + +static struct i2c_gpio_platform_data i2c_gpio_data = { + .sda_pin = 2, + .scl_pin = 3, + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .udelay = 40, +}; + +static struct platform_device i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &i2c_gpio_data, + }, +}; +#endif + static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -406,6 +494,15 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif + +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) + &i2c_gpio_device, +#endif + &stamp_flash_device, }; static int __init stamp_init(void) @@ -418,12 +515,10 @@ static int __init stamp_init(void) return ret; #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) -# if defined(CONFIG_BFIN_SHARED_FLASH_ENET) /* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */ bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (1 << CONFIG_ENET_FLASH_PIN)); bfin_write_FIO_FLAG_S(1 << CONFIG_ENET_FLASH_PIN); SSYNC(); -# endif #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) @@ -440,10 +535,8 @@ arch_initcall(stamp_init); void native_machine_restart(char *cmd) { -#if defined(CONFIG_BFIN_SHARED_FLASH_ENET) -# define BIT_TO_SET (1 << CONFIG_ENET_FLASH_PIN) +#define BIT_TO_SET (1 << CONFIG_ENET_FLASH_PIN) bfin_write_FIO_INEN(~BIT_TO_SET); bfin_write_FIO_DIR(BIT_TO_SET); bfin_write_FIO_FLAG_C(BIT_TO_SET); -#endif } diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig index 96a15196e41..7e789dbef03 100644 --- a/arch/blackfin/mach-bf537/boards/Kconfig +++ b/arch/blackfin/mach-bf537/boards/Kconfig @@ -21,6 +21,12 @@ config PNAV10 help PNAV board support. +config CAMSIG_MINOTAUR + bool "Cambridge Signal Processing LTD Minotaur" + depends on (BF537) + help + Board supply package for CSP Minotaur + config GENERIC_BF537_BOARD bool "Generic" help diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile index 94a85174283..87e450f29e3 100644 --- a/arch/blackfin/mach-bf537/boards/Makefile +++ b/arch/blackfin/mach-bf537/boards/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o obj-$(CONFIG_PNAV10) += pnav10.o +obj-$(CONFIG_CAMSIG_MINOTAUR) += minotaur.o diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index c0fb06dbc42..8703b67d5ec 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -29,6 +29,7 @@ */ #include <linux/device.h> +#include <linux/etherdevice.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -216,6 +217,12 @@ static struct platform_device rtc_device = { }; #endif +#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +static struct platform_device hitachi_fb_device = { + .name = "hitachi-tx09", +}; +#endif + #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) static struct resource smc91x_resources[] = { { @@ -374,6 +381,10 @@ static struct platform_device bfin_pata_device = { #endif static struct platform_device *cm_bf537_devices[] __initdata = { +#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) + &hitachi_fb_device, +#endif + #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, #endif diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index 09f4bfbd235..3e52f3f5bd5 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -8,7 +8,7 @@ * * Modified: * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2007 Analog Devices Inc. + * Copyright 2004-2008 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -29,6 +29,7 @@ */ #include <linux/device.h> +#include <linux/etherdevice.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -204,12 +205,8 @@ static struct resource sl811_hcd_resources[] = { void sl811_port_power(struct device *dev, int is_on) { gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); - gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); - if (is_on) - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); - else - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0); } #endif @@ -733,9 +730,11 @@ void native_machine_restart(char *cmd) bfin_gpio_reset_spi0_ssel1(); } +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) void bfin_get_ether_addr(char *addr) { random_ether_addr(addr); printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); } EXPORT_SYMBOL(bfin_get_ether_addr); +#endif diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c new file mode 100644 index 00000000000..b8bbba85af5 --- /dev/null +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -0,0 +1,317 @@ +/* + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#include <linux/usb_isp1362.h> +#endif +#include <linux/pata_platform.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/usb_sl811.h> +#include <asm/dma.h> +#include <asm/bfin5xx_spi.h> +#include <asm/reboot.h> +#include <linux/spi/ad7877.h> + +/* + * Name the Board for the /proc/cpuinfo + */ +char *bfin_board_name = "CamSig Minotaur BF537"; + +#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +static struct resource bfin_pcmcia_cf_resources[] = { + { + .start = 0x20310000, /* IO PORT */ + .end = 0x20312000, + .flags = IORESOURCE_MEM, + }, { + .start = 0x20311000, /* Attribute Memory */ + .end = 0x20311FFF, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF4, + .end = IRQ_PF4, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, { + .start = IRQ_PF6, /* Card Detect PF6 */ + .end = IRQ_PF6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pcmcia_cf_device = { + .name = "bfin_cf_pcmcia", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), + .resource = bfin_pcmcia_cf_resources, +}; +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mac_device = { + .name = "bfin_mac", +}; +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +static struct resource net2272_bfin_resources[] = { + { + .start = 0x20300000, + .end = 0x20300000 + 0x100, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device net2272_bfin_device = { + .name = "net2272", + .id = -1, + .num_resources = ARRAY_SIZE(net2272_bfin_resources), + .resource = net2272_bfin_resources, +}; +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ + +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) + +/* Partition sizes */ +#define FLASH_SIZE 0x00400000 +#define PSIZE_UBOOT 0x00030000 +#define PSIZE_INITRAMFS 0x00240000 + +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "uboot", + .size = PSIZE_UBOOT, + .offset = 0x000000, + .mask_flags = MTD_CAP_ROM + }, { + .name = "initramfs", + .size = PSIZE_INITRAMFS, + .offset = PSIZE_UBOOT + }, { + .name = "opt", + .size = FLASH_SIZE - (PSIZE_UBOOT + PSIZE_INITRAMFS), + .offset = PSIZE_UBOOT + PSIZE_INITRAMFS, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p64", +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, + .bits_per_word = 8, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 0, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, +#endif +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master bfin_spi0_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ +}; + +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bfin_spi0_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI, + .end = IRQ_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, +}; +#endif + +static struct platform_device *minotaur_devices[] __initdata = { +#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) + &bfin_pcmcia_cf_device, +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mac_device, +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + &net2272_bfin_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bfin_spi0_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) + &i2c_bfin_twi_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) + &bfin_sport0_uart_device, + &bfin_sport1_uart_device, +#endif + +}; + +static int __init minotaur_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + platform_add_devices(minotaur_devices, ARRAY_SIZE(minotaur_devices)); +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bfin_spi_board_info, + ARRAY_SIZE(bfin_spi_board_info)); +#endif + + return 0; +} + +arch_initcall(minotaur_init); + +void native_machine_restart(char *cmd) +{ + /* workaround reboot hang when booting from SPI */ + if ((bfin_read_SYSCR() & 0x7) == 0x3) + bfin_gpio_reset_spi0_ssel1(); +} diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index fd5f4a6f08e..509a8a236fd 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -8,7 +8,7 @@ * * Modified: * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2004-2008 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -29,6 +29,7 @@ */ #include <linux/device.h> +#include <linux/etherdevice.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -133,12 +134,8 @@ static struct resource sl811_hcd_resources[] = { void sl811_port_power(struct device *dev, int is_on) { gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); - gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); - if (is_on) - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); - else - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0); } #endif diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 07b0dc273d2..772541548b7 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -32,6 +32,7 @@ #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) @@ -103,6 +104,30 @@ void __exit bfin_isp1761_exit(void) arch_initcall(bfin_isp1761_init); #endif +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PF2, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PF3, 1, "gpio-keys: BTN1"}, + {BTN_2, GPIO_PF4, 1, "gpio-keys: BTN2"}, + {BTN_3, GPIO_PF5, 1, "gpio-keys: BTN3"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) static struct resource bfin_pcmcia_cf_resources[] = { { @@ -226,12 +251,7 @@ static struct resource sl811_hcd_resources[] = { void sl811_port_power(struct device *dev, int is_on) { gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); - gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); - - if (is_on) - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); - else - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); } #endif @@ -320,6 +340,49 @@ static struct platform_device net2272_bfin_device = { }; #endif +static struct mtd_partition stamp_partitions[] = { + { + .name = "Bootloader", + .size = 0x20000, + .offset = 0, + }, { + .name = "Kernel", + .size = 0xE0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "RootFS", + .size = 0x400000 - 0x20000 - 0xE0000 - 0x10000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "MAC Address", + .size = MTDPART_SIZ_FULL, + .offset = 0x3F0000, + .mask_flags = MTD_WRITEABLE, + } +}; + +static struct physmap_flash_data stamp_flash_data = { + .width = 2, + .parts = stamp_partitions, + .nr_parts = ARRAY_SIZE(stamp_partitions), +}; + +static struct resource stamp_flash_resource = { + .start = 0x20000000, + .end = 0x203fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device stamp_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &stamp_flash_data, + }, + .num_resources = 1, + .resource = &stamp_flash_resource, +}; + #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ @@ -738,6 +801,11 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif + &stamp_flash_device, }; static int __init stamp_init(void) diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig index d8bd3b49f15..1bfcd8f646a 100644 --- a/arch/blackfin/mach-bf548/Kconfig +++ b/arch/blackfin/mach-bf548/Kconfig @@ -7,7 +7,7 @@ menu "BF548 Specific Configuration" config DEB_DMA_URGENT bool "DMA has priority over core for ext. accesses" depends on BF54x - default n + default y help Treat any DEB1, DEB2 and DEB3 request as Urgent diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index d37d6653c4b..14860f04d1b 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -32,6 +32,7 @@ #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/irq.h> @@ -206,23 +207,6 @@ static struct platform_device smsc911x_device = { }; #endif -#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE) -static struct resource bf54x_hcd_resources[] = { - { - .start = 0xFFC03C00, - .end = 0xFFC040FF, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device bf54x_hcd = { - .name = "bf54x-hcd", - .id = 0, - .num_resources = ARRAY_SIZE(bf54x_hcd_resources), - .resource = bf54x_hcd_resources, -}; -#endif - #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) static struct resource musb_resources[] = { [0] = { @@ -243,14 +227,14 @@ static struct resource musb_resources[] = { }; static struct musb_hdrc_platform_data musb_plat = { -#ifdef CONFIG_USB_MUSB_OTG +#if defined(CONFIG_USB_MUSB_OTG) .mode = MUSB_OTG, -#elif CONFIG_USB_MUSB_HDRC_HCD +#elif defined(CONFIG_USB_MUSB_HDRC_HCD) .mode = MUSB_HOST, -#elif CONFIG_USB_GADGET_MUSB_HDRC +#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) .mode = MUSB_PERIPHERAL, #endif - .multipoint = 1, + .multipoint = 0, }; static u64 musb_dmamask = ~(u32)0; @@ -344,6 +328,44 @@ static struct platform_device bf54x_sdh_device = { }; #endif +static struct mtd_partition ezkit_partitions[] = { + { + .name = "Bootloader", + .size = 0x20000, + .offset = 0, + }, { + .name = "Kernel", + .size = 0xE0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "RootFS", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data ezkit_flash_data = { + .width = 2, + .parts = ezkit_partitions, + .nr_parts = ARRAY_SIZE(ezkit_partitions), +}; + +static struct resource ezkit_flash_resource = { + .start = 0x20000000, + .end = 0x20ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ezkit_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ezkit_flash_data, + }, + .num_resources = 1, + .resource = &ezkit_flash_resource, +}; + #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ #if defined(CONFIG_MTD_M25P80) \ @@ -531,6 +553,29 @@ static struct platform_device i2c_bfin_twi1_device = { #endif #endif +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PB8, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PB9, 1, "gpio-keys: BTN1"}, + {BTN_2, GPIO_PB10, 1, "gpio-keys: BTN2"}, + {BTN_3, GPIO_PB11, 1, "gpio-keys: BTN3"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -548,10 +593,6 @@ static struct platform_device *ezkit_devices[] __initdata = { &smsc911x_device, #endif -#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE) - &bf54x_hcd, -#endif - #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) &musb_device, #endif @@ -583,6 +624,11 @@ static struct platform_device *ezkit_devices[] __initdata = { &i2c_bfin_twi1_device, #endif #endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif + &ezkit_flash_device, }; static int __init stamp_init(void) diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 74b34c7f362..74fe258421a 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -298,8 +298,8 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); + p0.h = hi(SIC_IWR0); + p0.l = lo(SIC_IWR0); r0.l = 0x1; r0.h = 0x0; [p0] = r0; @@ -324,12 +324,25 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; +#if defined(CONFIG_BF54x) + P2.H = hi(EBIU_RSTCTL); + P2.L = lo(EBIU_RSTCTL); + R0 = [P2]; + BITSET (R0, 3); +#else P2.H = hi(EBIU_SDGCTL); P2.L = lo(EBIU_SDGCTL); R0 = [P2]; BITSET (R0, 24); +#endif [P2] = R0; SSYNC; +#if defined(CONFIG_BF54x) +.LSRR_MODE: + R0 = [P2]; + CC = BITTST(R0, 4); + if !CC JUMP .LSRR_MODE; +#endif r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ r0 = r0 << 9; /* Shift it over, */ @@ -361,6 +374,39 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; +#if defined(CONFIG_BF54x) + P2.H = hi(EBIU_RSTCTL); + P2.L = lo(EBIU_RSTCTL); + R0 = [P2]; + CC = BITTST(R0, 0); + if CC jump .Lskipddrrst; + BITSET (R0, 0); +.Lskipddrrst: + BITCLR (R0, 3); + [P2] = R0; + SSYNC; + + p0.l = lo(EBIU_DDRCTL0); + p0.h = hi(EBIU_DDRCTL0); + r0.l = lo(mem_DDRCTL0); + r0.h = hi(mem_DDRCTL0); + [p0] = r0; + ssync; + + p0.l = lo(EBIU_DDRCTL1); + p0.h = hi(EBIU_DDRCTL1); + r0.l = lo(mem_DDRCTL1); + r0.h = hi(mem_DDRCTL1); + [p0] = r0; + ssync; + + p0.l = lo(EBIU_DDRCTL2); + p0.h = hi(EBIU_DDRCTL2); + r0.l = lo(mem_DDRCTL2); + r0.h = hi(mem_DDRCTL2); + [p0] = r0; + ssync; +#else p0.l = lo(EBIU_SDRRC); p0.h = hi(EBIU_SDRRC); r0 = mem_SDRRC; @@ -394,9 +440,10 @@ ENTRY(_start_dma_code) R1 = R1 | R0; [P2] = R1; SSYNC; +#endif - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); + p0.h = hi(SIC_IWR0); + p0.l = lo(SIC_IWR0); r0.l = lo(IWR_ENABLE_ALL); r0.h = hi(IWR_ENABLE_ALL); [p0] = r0; diff --git a/arch/blackfin/mach-bf548/ints-priority.c b/arch/blackfin/mach-bf548/ints-priority.c index cb0ebac53c7..2665653cee3 100644 --- a/arch/blackfin/mach-bf548/ints-priority.c +++ b/arch/blackfin/mach-bf548/ints-priority.c @@ -4,7 +4,7 @@ * Author: Michael Hennerich * * Created: - * Description: Set up the interupt priorities + * Description: Set up the interrupt priorities * * Modified: * Copyright 2004-2006 Analog Devices Inc. @@ -58,7 +58,7 @@ void program_IAR(void) ((CONFIG_IRQ_PINT1 - 7) << IRQ_PINT1_POS) | ((CONFIG_IRQ_MDMAS0 - 7) << IRQ_MDMAS0_POS) | ((CONFIG_IRQ_MDMAS1 - 7) << IRQ_MDMAS1_POS) | - ((CONFIG_IRQ_WATCHDOG - 7) << IRQ_WATCHDOG_POS)); + ((CONFIG_IRQ_WATCHDOG - 7) << IRQ_WATCH_POS)); bfin_write_SIC_IAR3(((CONFIG_IRQ_DMAC1_ERR - 7) << IRQ_DMAC1_ERR_POS) | ((CONFIG_IRQ_SPORT2_ERR - 7) << IRQ_SPORT2_ERR_POS) | diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index c19cd29b948..3a79a9061bd 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -198,6 +198,13 @@ static struct platform_device bfin_spi0_device = { #endif /* spi master and devices */ +#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +static struct platform_device hitachi_fb_device = { + .name = "hitachi-tx09", +}; +#endif + + #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) static struct resource smc91x_resources[] = { @@ -315,6 +322,10 @@ static struct platform_device bfin_pata_device = { static struct platform_device *cm_bf561_devices[] __initdata = { +#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) + &hitachi_fb_device, +#endif + #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 4ff8f6e7a11..7601c3be1b5 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -29,6 +29,9 @@ #include <linux/device.h> #include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/irq.h> #include <linux/interrupt.h> @@ -155,6 +158,44 @@ static struct platform_device bfin_uart_device = { }; #endif +static struct mtd_partition ezkit_partitions[] = { + { + .name = "Bootloader", + .size = 0x20000, + .offset = 0, + }, { + .name = "Kernel", + .size = 0xE0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "RootFS", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data ezkit_flash_data = { + .width = 2, + .parts = ezkit_partitions, + .nr_parts = ARRAY_SIZE(ezkit_partitions), +}; + +static struct resource ezkit_flash_resource = { + .start = 0x20000000, + .end = 0x207fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ezkit_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ezkit_flash_data, + }, + .num_resources = 1, + .resource = &ezkit_flash_resource, +}; + #ifdef CONFIG_SPI_BFIN #if defined(CONFIG_SND_BLACKFIN_AD1836) \ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) @@ -246,6 +287,50 @@ static struct platform_device bfin_pata_device = { }; #endif +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PF5, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PF6, 1, "gpio-keys: BTN1"}, + {BTN_2, GPIO_PF7, 1, "gpio-keys: BTN2"}, + {BTN_3, GPIO_PF8, 1, "gpio-keys: BTN3"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#include <linux/i2c-gpio.h> + +static struct i2c_gpio_platform_data i2c_gpio_data = { + .sda_pin = 1, + .scl_pin = 0, + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .udelay = 40, +}; + +static struct platform_device i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &i2c_gpio_data, + }, +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, @@ -258,12 +343,23 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) &bfin_spi0_device, #endif + #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif + #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif + +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) + &i2c_gpio_device, +#endif + &ezkit_flash_device, }; static int __init ezkit_init(void) diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c index 5d1d21b4c2a..1b44e9e6dc3 100644 --- a/arch/blackfin/mach-bf561/coreb.c +++ b/arch/blackfin/mach-bf561/coreb.c @@ -33,7 +33,9 @@ #include <linux/ioport.h> #include <linux/module.h> #include <linux/uaccess.h> +#include <linux/fs.h> #include <asm/dma.h> +#include <asm/cacheflush.h> #define MODULE_VER "v0.1" @@ -90,11 +92,12 @@ static ssize_t coreb_write(struct file *file, const char *buf, size_t count, coreb_dma_done = 0; + flush_dcache_range((unsigned long)buf, (unsigned long)(buf+len)); /* Source Channel */ set_dma_start_addr(CH_MEM_STREAM2_SRC, (unsigned long)buf); set_dma_x_count(CH_MEM_STREAM2_SRC, len); set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char)); - set_dma_config(CH_MEM_STREAM2_SRC, RESTART); + set_dma_config(CH_MEM_STREAM2_SRC, 0); /* Destination Channel */ set_dma_start_addr(CH_MEM_STREAM2_DEST, coreb_base + p); set_dma_x_count(CH_MEM_STREAM2_DEST, len); @@ -135,11 +138,12 @@ static ssize_t coreb_read(struct file *file, char *buf, size_t count, coreb_dma_done = 0; + invalidate_dcache_range((unsigned long)buf, (unsigned long)(buf+len)); /* Source Channel */ set_dma_start_addr(CH_MEM_STREAM2_SRC, coreb_base + p); set_dma_x_count(CH_MEM_STREAM2_SRC, len); set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char)); - set_dma_config(CH_MEM_STREAM2_SRC, RESTART); + set_dma_config(CH_MEM_STREAM2_SRC, 0); /* Destination Channel */ set_dma_start_addr(CH_MEM_STREAM2_DEST, (unsigned long)buf); set_dma_x_count(CH_MEM_STREAM2_DEST, len); @@ -266,7 +270,7 @@ static int coreb_ioctl(struct inode *inode, struct file *file, coreb_status |= COREB_IS_RUNNING; bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~0x0020); SSYNC(); - spin_lock_irq(&coreb_lock); + spin_unlock_irq(&coreb_lock); break; #if defined(CONFIG_BF561_COREB_RESET) case CMD_COREB_STOP: @@ -275,7 +279,7 @@ static int coreb_ioctl(struct inode *inode, struct file *file, bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() | 0x0020); bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080); coreb_status &= ~COREB_IS_RUNNING; - spin_lock_irq(&coreb_lock); + spin_unlock_irq(&coreb_lock); break; case CMD_COREB_RESET: printk(KERN_INFO "Resetting Core B\n"); diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile index 4d7733dfd5d..8636d4284bd 100644 --- a/arch/blackfin/mach-common/Makefile +++ b/arch/blackfin/mach-common/Makefile @@ -3,10 +3,9 @@ # obj-y := \ - cache.o cacheinit.o cplbhdlr.o cplbmgr.o entry.o \ + cache.o cacheinit.o entry.o \ interrupt.o lock.o irqpanic.o arch_checks.o -obj-$(CONFIG_CPLB_INFO) += cplbinfo.o obj-$(CONFIG_BFIN_SINGLE_CORE) += ints-priority-sc.o obj-$(CONFIG_BFIN_DUAL_CORE) += ints-priority-dc.o obj-$(CONFIG_PM) += pm.o dpmc.o diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc.S index 39fbc286110..b82c096e198 100644 --- a/arch/blackfin/mach-common/dpmc.S +++ b/arch/blackfin/mach-common/dpmc.S @@ -38,6 +38,9 @@ ENTRY(_unmask_wdog_wakeup_evt) #if defined(CONFIG_BF561) P0.H = hi(SICA_IWR1); P0.L = lo(SICA_IWR1); +#elif defined(CONFIG_BF54x) || defined(CONFIG_BF52x) + P0.h = HI(SIC_IWR0); + P0.l = LO(SIC_IWR0); #else P0.h = HI(SIC_IWR); P0.l = LO(SIC_IWR); @@ -172,7 +175,7 @@ ENTRY(_sleep_mode) call _set_sic_iwr; R0 = 0xFFFF (Z); - call _set_rtc_istat + call _set_rtc_istat; P0.H = hi(PLL_CTL); P0.L = lo(PLL_CTL); @@ -210,7 +213,7 @@ ENTRY(_hibernate_mode) call _set_sic_iwr; R0 = 0xFFFF (Z); - call _set_rtc_istat + call _set_rtc_istat; P0.H = hi(VR_CTL); P0.L = lo(VR_CTL); @@ -236,7 +239,7 @@ ENTRY(_deep_sleep) call _set_sic_iwr; - call _set_sdram_srfs; + call _set_dram_srfs; /* Clear all the interrupts,bits sticky */ R0 = 0xFFFF (Z); @@ -253,7 +256,7 @@ ENTRY(_deep_sleep) SSYNC; IDLE; - call _unset_sdram_srfs; + call _unset_dram_srfs; call _test_pll_locked; @@ -285,23 +288,22 @@ ENTRY(_sleep_deeper) P3 = R0; R0 = IWR_ENABLE(0); call _set_sic_iwr; - call _set_sdram_srfs; + call _set_dram_srfs; /* Set SDRAM Self Refresh */ /* Clear all the interrupts,bits sticky */ R0 = 0xFFFF (Z); - call _set_rtc_istat - + call _set_rtc_istat; P0.H = hi(PLL_DIV); P0.L = lo(PLL_DIV); R6 = W[P0](z); R0.L = 0xF; - W[P0] = R0.l; + W[P0] = R0.l; /* Set Max VCO to SCLK divider */ P0.H = hi(PLL_CTL); P0.L = lo(PLL_CTL); R5 = W[P0](z); R0.L = (CONFIG_MIN_VCO_HZ/CONFIG_CLKIN_HZ) << 9; - W[P0] = R0.l; + W[P0] = R0.l; /* Set Min CLKIN to VCO multiplier */ SSYNC; IDLE; @@ -317,29 +319,28 @@ ENTRY(_sleep_deeper) R1 = R1|R2; R2 = DEPOSIT(R7, R1); - W[P0] = R2; + W[P0] = R2; /* Set Min Core Voltage */ SSYNC; IDLE; call _test_pll_locked; + R0 = P3; + call _set_sic_iwr; /* Set Awake from IDLE */ + P0.H = hi(PLL_CTL); P0.L = lo(PLL_CTL); R0 = W[P0](z); BITSET (R0, 3); - W[P0] = R0.L; - - R0 = P3; - call _set_sic_iwr; - + W[P0] = R0.L; /* Turn CCLK OFF */ SSYNC; IDLE; call _test_pll_locked; R0 = IWR_ENABLE(0); - call _set_sic_iwr; + call _set_sic_iwr; /* Set Awake from IDLE PLL */ P0.H = hi(VR_CTL); P0.L = lo(VR_CTL); @@ -352,15 +353,15 @@ ENTRY(_sleep_deeper) P0.H = hi(PLL_DIV); P0.L = lo(PLL_DIV); - W[P0]= R6; + W[P0]= R6; /* Restore CCLK and SCLK divider */ P0.H = hi(PLL_CTL); P0.L = lo(PLL_CTL); - w[p0] = R5; + w[p0] = R5; /* Restore VCO multiplier */ IDLE; call _test_pll_locked; - call _unset_sdram_srfs; + call _unset_dram_srfs; /* SDRAM Self Refresh Off */ STI R4; @@ -368,25 +369,47 @@ ENTRY(_sleep_deeper) ( R7:0, P5:0 ) = [SP++]; RTS; -ENTRY(_set_sdram_srfs) - /* set the sdram to self refresh mode */ +ENTRY(_set_dram_srfs) + /* set the dram to self refresh mode */ +#if defined(CONFIG_BF54x) + P0.H = hi(EBIU_RSTCTL); + P0.L = lo(EBIU_RSTCTL); + R2 = [P0]; + R3.H = hi(SRREQ); + R3.L = lo(SRREQ); +#else P0.H = hi(EBIU_SDGCTL); P0.L = lo(EBIU_SDGCTL); R2 = [P0]; R3.H = hi(SRFS); R3.L = lo(SRFS); +#endif R2 = R2|R3; [P0] = R2; ssync; +#if defined(CONFIG_BF54x) +.LSRR_MODE: + R2 = [P0]; + CC = BITTST(R2, 4); + if !CC JUMP .LSRR_MODE; +#endif RTS; -ENTRY(_unset_sdram_srfs) - /* set the sdram out of self refresh mode */ +ENTRY(_unset_dram_srfs) + /* set the dram out of self refresh mode */ +#if defined(CONFIG_BF54x) + P0.H = hi(EBIU_RSTCTL); + P0.L = lo(EBIU_RSTCTL); + R2 = [P0]; + R3.H = hi(SRREQ); + R3.L = lo(SRREQ); +#else P0.H = hi(EBIU_SDGCTL); P0.L = lo(EBIU_SDGCTL); R2 = [P0]; R3.H = hi(SRFS); R3.L = lo(SRFS); +#endif R3 = ~R3; R2 = R2&R3; [P0] = R2; @@ -394,8 +417,13 @@ ENTRY(_unset_sdram_srfs) RTS; ENTRY(_set_sic_iwr) +#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) + P0.H = hi(SIC_IWR0); + P0.L = lo(SIC_IWR0); +#else P0.H = hi(SIC_IWR); P0.L = lo(SIC_IWR); +#endif [P0] = R0; SSYNC; RTS; diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index dc9d3ee2e69..56ff51bc8c2 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -95,6 +95,9 @@ ENTRY(_ex_workaround_261) R6 = 0x26; /* Data CPLB Miss */ cc = R6 == R7; if cc jump _ex_dcplb_miss (BP); + R6 = 0x23; /* Data CPLB Miss */ + cc = R6 == R7; + if cc jump _ex_dcplb_viol (BP); /* Handle 0x23 Data CPLB Protection Violation * and Data CPLB Multiple Hits - Linux Trap Zero */ @@ -102,17 +105,33 @@ ENTRY(_ex_workaround_261) ENDPROC(_ex_workaround_261) #else +#ifdef CONFIG_MPU +#define _ex_dviol _ex_dcplb_viol +#else #define _ex_dviol _ex_trap_c +#endif #define _ex_dmiss _ex_dcplb_miss #define _ex_dmult _ex_trap_c #endif + +ENTRY(_ex_dcplb_viol) ENTRY(_ex_dcplb_miss) ENTRY(_ex_icplb_miss) (R7:6,P5:4) = [sp++]; ASTAT = [sp++]; SAVE_ALL_SYS +#ifdef CONFIG_MPU + R0 = SEQSTAT; + R1 = SP; + sp += -12; + call _cplb_hdr; + sp += 12; + CC = R0 == 0; + IF !CC JUMP _handle_bad_cplb; +#else call __cplb_hdr; +#endif DEBUG_START_HWTRACE(p5, r7) RESTORE_ALL_SYS SP = EX_SCRATCH_REG; @@ -329,7 +348,7 @@ ENTRY(_exception_to_level5) R7 = R7 + R6; P5 = R7; R1 = [P5]; - [SP + 8] = r1; + [SP + PT_SEQSTAT] = r1; r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ SP += -12; @@ -633,9 +652,7 @@ ENTRY(_ret_from_exception) [sp + PT_IPEND] = r0; 1: - r1 = 0x37(Z); - r2 = ~r1; - r2.h = 0; + r2 = LO(~0x37) (Z); r0 = r2 & r0; cc = r0 == 0; if !cc jump 4f; /* if not return to user mode, get out */ @@ -1364,6 +1381,7 @@ ENTRY(_sys_call_table) .long _sys_set_robust_list .long _sys_get_robust_list /* 355 */ .long _sys_fallocate + .long _sys_semtimedop .rept NR_syscalls-(.-_sys_call_table)/4 .long _sys_ni_syscall .endr diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index 4de376418a1..7f752c87fe4 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -34,9 +34,13 @@ #include <asm/entry.h> #include <asm/asm-offsets.h> #include <asm/trace.h> +#include <asm/traps.h> +#include <asm/thread_info.h> #include <asm/mach-common/context.S> +.extern _ret_from_exception + #ifdef CONFIG_I_ENTRY_L1 .section .l1.text #else @@ -117,8 +121,8 @@ __common_int_entry: #if ANOMALY_05000283 || ANOMALY_05000315 cc = r7 == r7; - p5.h = 0xffc0; - p5.l = 0x0014; + p5.h = HI(CHIPID); + p5.l = LO(CHIPID); if cc jump 1f; r7.l = W[p5]; 1: @@ -134,26 +138,22 @@ __common_int_entry: /* interrupt routine for ivhw - 5 */ ENTRY(_evt_ivhw) - SAVE_CONTEXT + SAVE_ALL_SYS #ifdef CONFIG_FRAME_POINTER fp = 0; #endif + #if ANOMALY_05000283 cc = r7 == r7; - p5.h = 0xffc0; - p5.l = 0x0014; + p5.h = HI(CHIPID); + p5.l = LO(CHIPID); if cc jump 1f; r7.l = W[p5]; 1: #endif - trace_buffer_stop(p0, r0); - - r0 = IRQ_HWERR; - r1 = sp; - #ifdef CONFIG_HARDWARE_PM - r7 = SEQSTAT; + r7 = [sp + PT_SEQSTAT]; r7 = r7 >>> 0xe; r6 = 0x1F; r7 = r7 & r6; @@ -161,11 +161,29 @@ ENTRY(_evt_ivhw) cc = r7 == r5; if cc jump .Lcall_do_ovf; /* deal with performance counter overflow */ #endif - + # We are going to dump something out, so make sure we print IPEND properly + p2.l = lo(IPEND); + p2.h = hi(IPEND); + r0 = [p2]; + [sp + PT_IPEND] = r0; + + /* set the EXCAUSE to HWERR for trap_c */ + r0 = [sp + PT_SEQSTAT]; + R1.L = LO(VEC_HWERR); + R1.H = HI(VEC_HWERR); + R0 = R0 | R1; + [sp + PT_SEQSTAT] = R0; + + r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ SP += -12; - call _irq_panic; + call _trap_c; SP += 12; + + call _ret_from_exception; +.Lcommon_restore_all_sys: + RESTORE_ALL_SYS rti; + #ifdef CONFIG_HARDWARE_PM .Lcall_do_ovf: @@ -173,9 +191,11 @@ ENTRY(_evt_ivhw) call _pm_overflow; SP += 12; - jump .Lcommon_restore_context; + jump .Lcommon_restore_all_sys; #endif +ENDPROC(_evt_ivhw) + /* Interrupt routine for evt2 (NMI). * We don't actually use this, so just return. * For inner circle type details, please see: diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c index 4882f0e801a..8d18d6b163b 100644 --- a/arch/blackfin/mach-common/ints-priority-dc.c +++ b/arch/blackfin/mach-common/ints-priority-dc.c @@ -222,11 +222,12 @@ static void bf561_gpio_unmask_irq(unsigned int irq) static unsigned int bf561_gpio_irq_startup(unsigned int irq) { unsigned int ret; + char buf[8]; u16 gpionr = irq - IRQ_PF0; if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - - ret = gpio_request(gpionr, "IRQ"); + snprintf(buf, sizeof buf, "IRQ %d", irq); + ret = gpio_request(gpionr, buf); if (ret) return ret; @@ -250,6 +251,7 @@ static int bf561_gpio_irq_type(unsigned int irq, unsigned int type) { unsigned int ret; + char buf[8]; u16 gpionr = irq - IRQ_PF0; @@ -265,8 +267,8 @@ static int bf561_gpio_irq_type(unsigned int irq, unsigned int type) IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - - ret = gpio_request(gpionr, "IRQ"); + snprintf(buf, sizeof buf, "IRQ %d", irq); + ret = gpio_request(gpionr, buf); if (ret) return ret; diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c index 147f0731087..dec42acb5de 100644 --- a/arch/blackfin/mach-common/ints-priority-sc.c +++ b/arch/blackfin/mach-common/ints-priority-sc.c @@ -313,6 +313,7 @@ static void bfin_demux_error_irq(unsigned int int_err_irq, static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)]; static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)]; + static void bfin_gpio_ack_irq(unsigned int irq) { u16 gpionr = irq - IRQ_PF0; @@ -352,9 +353,11 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq) { unsigned int ret; u16 gpionr = irq - IRQ_PF0; + char buf[8]; if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, "IRQ"); + snprintf(buf, sizeof buf, "IRQ %d", irq); + ret = gpio_request(gpionr, buf); if (ret) return ret; } @@ -376,6 +379,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) { unsigned int ret; + char buf[8]; u16 gpionr = irq - IRQ_PF0; if (type == IRQ_TYPE_PROBE) { @@ -388,7 +392,8 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, "IRQ"); + snprintf(buf, sizeof buf, "IRQ %d", irq); + ret = gpio_request(gpionr, buf); if (ret) return ret; } @@ -478,6 +483,10 @@ static void bfin_demux_gpio_irq(unsigned int intb_irq, static unsigned char irq2pint_lut[NR_PINTS]; static unsigned char pint2irq_lut[NR_PINT_SYS_IRQS * NR_PINT_BITS]; +static unsigned int gpio_both_edge_triggered[NR_PINT_SYS_IRQS]; +static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)]; + + struct pin_int_t { unsigned int mask_set; unsigned int mask_clear; @@ -544,13 +553,20 @@ void init_pint_lut(void) } -static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)]; - static void bfin_gpio_ack_irq(unsigned int irq) { u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; + u32 pintbit = PINT_BIT(pint_val); + u8 bank = PINT_2_BANK(pint_val); + + if (unlikely(gpio_both_edge_triggered[bank] & pintbit)) { + if (pint[bank]->invert_set & pintbit) + pint[bank]->invert_clear = pintbit; + else + pint[bank]->invert_set = pintbit; + } + pint[bank]->request = pintbit; - pint[PINT_2_BANK(pint_val)]->request = PINT_BIT(pint_val); SSYNC(); } @@ -560,6 +576,13 @@ static void bfin_gpio_mask_ack_irq(unsigned int irq) u32 pintbit = PINT_BIT(pint_val); u8 bank = PINT_2_BANK(pint_val); + if (unlikely(gpio_both_edge_triggered[bank] & pintbit)) { + if (pint[bank]->invert_set & pintbit) + pint[bank]->invert_clear = pintbit; + else + pint[bank]->invert_set = pintbit; + } + pint[bank]->request = pintbit; pint[bank]->mask_clear = pintbit; SSYNC(); @@ -587,7 +610,8 @@ static void bfin_gpio_unmask_irq(unsigned int irq) static unsigned int bfin_gpio_irq_startup(unsigned int irq) { unsigned int ret; - u16 gpionr = irq - IRQ_PA0; + char buf[8]; + u16 gpionr = irq_to_gpio(irq); u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; if (pint_val == IRQ_NOT_AVAIL) { @@ -598,7 +622,8 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq) } if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, "IRQ"); + snprintf(buf, sizeof buf, "IRQ %d", irq); + ret = gpio_request(gpionr, buf); if (ret) return ret; } @@ -611,16 +636,19 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq) static void bfin_gpio_irq_shutdown(unsigned int irq) { + u16 gpionr = irq_to_gpio(irq); + bfin_gpio_mask_irq(irq); - gpio_free(irq - IRQ_PA0); - gpio_enabled[gpio_bank(irq - IRQ_PA0)] &= ~gpio_bit(irq - IRQ_PA0); + gpio_free(gpionr); + gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr); } static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) { unsigned int ret; - u16 gpionr = irq - IRQ_PA0; + char buf[8]; + u16 gpionr = irq_to_gpio(irq); u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; u32 pintbit = PINT_BIT(pint_val); u8 bank = PINT_2_BANK(pint_val); @@ -638,7 +666,8 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, "IRQ"); + snprintf(buf, sizeof buf, "IRQ %d", irq); + ret = gpio_request(gpionr, buf); if (ret) return ret; } @@ -651,28 +680,33 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) gpio_direction_input(gpionr); - if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { - pint[bank]->edge_set = pintbit; - } else { - pint[bank]->edge_clear = pintbit; - } - if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW))) pint[bank]->invert_set = pintbit; /* low or falling edge denoted by one */ else - pint[bank]->invert_set = pintbit; /* high or rising edge denoted by zero */ + pint[bank]->invert_clear = pintbit; /* high or rising edge denoted by zero */ - if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) - pint[bank]->invert_set = pintbit; - else - pint[bank]->invert_set = pintbit; + if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) + == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { - SSYNC(); + gpio_both_edge_triggered[bank] |= pintbit; - if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) + if (gpio_get_value(gpionr)) + pint[bank]->invert_set = pintbit; + else + pint[bank]->invert_clear = pintbit; + } else { + gpio_both_edge_triggered[bank] &= ~pintbit; + } + + if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { + pint[bank]->edge_set = pintbit; set_irq_handler(irq, handle_edge_irq); - else + } else { + pint[bank]->edge_clear = pintbit; set_irq_handler(irq, handle_level_irq); + } + + SSYNC(); return 0; } diff --git a/arch/blackfin/mach-common/irqpanic.c b/arch/blackfin/mach-common/irqpanic.c index b22959b197e..606ded9ff4e 100644 --- a/arch/blackfin/mach-common/irqpanic.c +++ b/arch/blackfin/mach-common/irqpanic.c @@ -46,9 +46,6 @@ void irq_panic(int reason, struct pt_regs *regs) __attribute__ ((l1_text)); */ asmlinkage void irq_panic(int reason, struct pt_regs *regs) { - int sig = 0; - siginfo_t info; - #ifdef CONFIG_DEBUG_ICACHE_CHECK unsigned int cmd, tag, ca, cache_hi, cache_lo, *pa; unsigned short i, j, die; @@ -136,53 +133,6 @@ asmlinkage void irq_panic(int reason, struct pt_regs *regs) } #endif - printk(KERN_EMERG "\n"); - printk(KERN_EMERG "Exception: IRQ 0x%x entered\n", reason); - printk(KERN_EMERG " code=[0x%08lx], stack frame=0x%08lx, " - " bad PC=0x%08lx\n", - (unsigned long)regs->seqstat, - (unsigned long)regs, - (unsigned long)regs->pc); - if (reason == 0x5) { - printk(KERN_EMERG "----------- HARDWARE ERROR -----------\n"); - - /* There is only need to check for Hardware Errors, since other - * EXCEPTIONS are handled in TRAPS.c (MH) - */ - switch (regs->seqstat & SEQSTAT_HWERRCAUSE) { - case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR): /* System MMR Error */ - info.si_code = BUS_ADRALN; - sig = SIGBUS; - printk(KERN_EMERG HWC_x2(KERN_EMERG)); - break; - case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR): /* External Memory Addressing Error */ - info.si_code = BUS_ADRERR; - sig = SIGBUS; - printk(KERN_EMERG HWC_x3(KERN_EMERG)); - break; - case (SEQSTAT_HWERRCAUSE_PERF_FLOW): /* Performance Monitor Overflow */ - printk(KERN_EMERG HWC_x12(KERN_EMERG)); - break; - case (SEQSTAT_HWERRCAUSE_RAISE_5): /* RAISE 5 instruction */ - printk(KERN_EMERG HWC_x18(KERN_EMERG)); - break; - default: /* Reserved */ - printk(KERN_EMERG HWC_default(KERN_EMERG)); - break; - } - } - - regs->ipend = bfin_read_IPEND(); - dump_bfin_process(regs); - dump_bfin_mem((void *)regs->pc); - show_regs(regs); - if (0 == (info.si_signo = sig) || 0 == user_mode(regs)) /* in kernelspace */ - panic("Unhandled IRQ or exceptions!\n"); - else { /* in userspace */ - info.si_errno = 0; - info.si_addr = (void *)regs->pc; - force_sig_info(sig, &info, current); - } } #ifdef CONFIG_HARDWARE_PM diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index dac51fb06f2..81930f7d06f 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -77,7 +77,15 @@ void bfin_pm_suspend_standby_enter(void) gpio_pm_restore(); +#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) + bfin_write_SIC_IWR0(IWR_ENABLE_ALL); + bfin_write_SIC_IWR1(IWR_ENABLE_ALL); +# ifdef CONFIG_BF54x + bfin_write_SIC_IWR2(IWR_ENABLE_ALL); +# endif +#else bfin_write_SIC_IWR(IWR_ENABLE_ALL); +#endif local_irq_restore(flags); } @@ -85,7 +93,15 @@ void bfin_pm_suspend_standby_enter(void) #if defined(CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR) sleep_deeper(CONFIG_PM_WAKEUP_SIC_IWR); +# if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) + bfin_write_SIC_IWR0(IWR_ENABLE_ALL); + bfin_write_SIC_IWR1(IWR_ENABLE_ALL); +# ifdef CONFIG_BF54x + bfin_write_SIC_IWR2(IWR_ENABLE_ALL); +# endif +# else bfin_write_SIC_IWR(IWR_ENABLE_ALL); +# endif #endif /* CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR */ } diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index e97ea8fc8dc..eb1a12ac9e3 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -128,8 +128,8 @@ void __init paging_init(void) void __init mem_init(void) { unsigned int codek = 0, datak = 0, initk = 0; + unsigned int reservedpages = 0, freepages = 0; unsigned long tmp; - unsigned int len = _ramend - _rambase; unsigned long start_mem = memory_start; unsigned long end_mem = memory_end; @@ -138,19 +138,36 @@ void __init mem_init(void) start_mem = PAGE_ALIGN(start_mem); max_mapnr = num_physpages = MAP_NR(high_memory); - printk(KERN_INFO "Physical pages: %lx\n", num_physpages); + printk(KERN_INFO "Kernel managed physical pages: %lu\n", + num_physpages); /* This will put all memory onto the freelists. */ totalram_pages = free_all_bootmem(); + reservedpages = 0; + for (tmp = 0; tmp < max_mapnr; tmp++) + if (PageReserved(pfn_to_page(tmp))) + reservedpages++; + freepages = max_mapnr - reservedpages; + + /* do not count in kernel image between _rambase and _ramstart */ + reservedpages -= (_ramstart - _rambase) >> PAGE_SHIFT; +#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263) + reservedpages += (_ramend - memory_end - DMA_UNCACHED_REGION) >> + PAGE_SHIFT; +#endif + codek = (_etext - _stext) >> 10; - datak = (__bss_stop - __bss_start) >> 10; initk = (__init_end - __init_begin) >> 10; + datak = ((_ramstart - _rambase) >> 10) - codek - initk; - tmp = nr_free_pages() << PAGE_SHIFT; printk(KERN_INFO - "Memory available: %luk/%uk RAM, (%uk init code, %uk kernel code, %uk data, %uk dma)\n", - tmp >> 10, len >> 10, initk, codek, datak, DMA_UNCACHED_REGION >> 10); + "Memory available: %luk/%luk RAM, " + "(%uk init code, %uk kernel code, " + "%uk data, %uk dma, %uk reserved)\n", + (unsigned long) freepages << (PAGE_SHIFT-10), _ramend >> 10, + initk, codek, datak, DMA_UNCACHED_REGION >> 10, + (reservedpages << (PAGE_SHIFT-10))); /* Initialize the blackfin L1 Memory. */ l1sram_init(); @@ -184,13 +201,15 @@ static __init void free_init_pages(const char *what, unsigned long begin, unsign #ifdef CONFIG_BLK_DEV_INITRD void __init free_initrd_mem(unsigned long start, unsigned long end) { +#ifndef CONFIG_MPU free_init_pages("initrd memory", start, end); +#endif } #endif void __init free_initmem(void) { -#ifdef CONFIG_RAMKERNEL +#if defined CONFIG_RAMKERNEL && !defined CONFIG_MPU free_init_pages("unused kernel memory", (unsigned long)(&__init_begin), (unsigned long)(&__init_end)); diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c index d51e18fb789..841904cdef4 100644 --- a/arch/mips/au1000/common/platform.c +++ b/arch/mips/au1000/common/platform.c @@ -270,6 +270,24 @@ static struct platform_device smc91x_device = { #endif +/* All Alchemy demoboards with I2C have this #define in their headers */ +#ifdef SMBUS_PSC_BASE +static struct resource pbdb_smbus_resources[] = { + { + .start = SMBUS_PSC_BASE, + .end = SMBUS_PSC_BASE + 0x24 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device pbdb_smbus_device = { + .name = "au1xpsc_smbus", + .id = 0, /* bus number */ + .num_resources = ARRAY_SIZE(pbdb_smbus_resources), + .resource = pbdb_smbus_resources, +}; +#endif + static struct platform_device *au1xxx_platform_devices[] __initdata = { &au1xxx_usb_ohci_device, &au1x00_pcmcia_device, @@ -287,6 +305,9 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = { #ifdef CONFIG_MIPS_DB1200 &smc91x_device, #endif +#ifdef SMBUS_PSC_BASE + &pbdb_smbus_device, +#endif }; int __init au1xxx_platform_init(void) diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c index b84f8df325c..cb0a7493ff6 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.c +++ b/arch/ppc/platforms/83xx/mpc834x_sys.c @@ -224,26 +224,6 @@ mpc834x_sys_init_IRQ(void) ipic_set_default_priority(); } -#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374) -extern ulong ds1374_get_rtc_time(void); -extern int ds1374_set_rtc_time(ulong); - -static int __init -mpc834x_rtc_hookup(void) -{ - struct timespec tv; - - ppc_md.get_rtc_time = ds1374_get_rtc_time; - ppc_md.set_rtc_time = ds1374_set_rtc_time; - - tv.tv_nsec = 0; - tv.tv_sec = (ppc_md.get_rtc_time)(); - do_settimeofday(&tv); - - return 0; -} -late_initcall(mpc834x_rtc_hookup); -#endif static __inline__ void mpc834x_sys_set_bat(void) { diff --git a/arch/ppc/platforms/85xx/tqm85xx.c b/arch/ppc/platforms/85xx/tqm85xx.c index 4ee2bd156dc..27ce389c122 100644 --- a/arch/ppc/platforms/85xx/tqm85xx.c +++ b/arch/ppc/platforms/85xx/tqm85xx.c @@ -258,27 +258,6 @@ int tqm85xx_show_cpuinfo(struct seq_file *m) return 0; } -#if defined(CONFIG_I2C) && defined(CONFIG_SENSORS_DS1337) -extern ulong ds1337_get_rtc_time(void); -extern int ds1337_set_rtc_time(unsigned long nowtime); - -static int __init -tqm85xx_rtc_hookup(void) -{ - struct timespec tv; - - ppc_md.set_rtc_time = ds1337_set_rtc_time; - ppc_md.get_rtc_time = ds1337_get_rtc_time; - - tv.tv_nsec = 0; - tv.tv_sec = (ppc_md.get_rtc_time)(); - do_settimeofday(&tv); - - return 0; -} -late_initcall(tqm85xx_rtc_hookup); -#endif - #ifdef CONFIG_PCI /* * interrupt routing diff --git a/arch/ppc/platforms/katana.c b/arch/ppc/platforms/katana.c index 52f63e6f085..fe6e88cdb1c 100644 --- a/arch/ppc/platforms/katana.c +++ b/arch/ppc/platforms/katana.c @@ -838,27 +838,6 @@ katana_find_end_of_memory(void) return bdp->bi_memsize; } -#if defined(CONFIG_I2C_MV64XXX) && defined(CONFIG_SENSORS_M41T00) -extern ulong m41t00_get_rtc_time(void); -extern int m41t00_set_rtc_time(ulong); - -static int __init -katana_rtc_hookup(void) -{ - struct timespec tv; - - ppc_md.get_rtc_time = m41t00_get_rtc_time; - ppc_md.set_rtc_time = m41t00_set_rtc_time; - - tv.tv_nsec = 0; - tv.tv_sec = (ppc_md.get_rtc_time)(); - do_settimeofday(&tv); - - return 0; -} -late_initcall(katana_rtc_hookup); -#endif - #if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE) static void __init katana_map_io(void) diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 1330061020a..6ef54d27fc0 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -276,9 +276,6 @@ source "kernel/Kconfig.preempt" source "mm/Kconfig" -config HOLES_IN_ZONE - def_bool y - comment "I/O subsystem configuration" config MACHCHK_WARNING diff --git a/arch/s390/crypto/Kconfig b/arch/s390/crypto/Kconfig deleted file mode 100644 index d1defbbfcd8..00000000000 --- a/arch/s390/crypto/Kconfig +++ /dev/null @@ -1,60 +0,0 @@ -config CRYPTO_SHA1_S390 - tristate "SHA1 digest algorithm" - depends on S390 - select CRYPTO_ALGAPI - help - This is the s390 hardware accelerated implementation of the - SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2). - -config CRYPTO_SHA256_S390 - tristate "SHA256 digest algorithm" - depends on S390 - select CRYPTO_ALGAPI - help - This is the s390 hardware accelerated implementation of the - SHA256 secure hash standard (DFIPS 180-2). - - This version of SHA implements a 256 bit hash with 128 bits of - security against collision attacks. - -config CRYPTO_DES_S390 - tristate "DES and Triple DES cipher algorithms" - depends on S390 - select CRYPTO_ALGAPI - select CRYPTO_BLKCIPHER - help - This us the s390 hardware accelerated implementation of the - DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3). - -config CRYPTO_AES_S390 - tristate "AES cipher algorithms" - depends on S390 - select CRYPTO_ALGAPI - select CRYPTO_BLKCIPHER - help - This is the s390 hardware accelerated implementation of the - AES cipher algorithms (FIPS-197). AES uses the Rijndael - algorithm. - - Rijndael appears to be consistently a very good performer in - both hardware and software across a wide range of computing - environments regardless of its use in feedback or non-feedback - modes. Its key setup time is excellent, and its key agility is - good. Rijndael's very low memory requirements make it very well - suited for restricted-space environments, in which it also - demonstrates excellent performance. Rijndael's operations are - among the easiest to defend against power and timing attacks. - - On s390 the System z9-109 currently only supports the key size - of 128 bit. - -config S390_PRNG - tristate "Pseudo random number generator device driver" - depends on S390 - default "m" - help - Select this option if you want to use the s390 pseudo random number - generator. The PRNG is part of the cryptographic processor functions - and uses triple-DES to generate secure random numbers like the - ANSI X9.17 standard. The PRNG is usable via the char device - /dev/prandom. diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c index 46c97058ebe..a3f67f8b542 100644 --- a/arch/s390/crypto/aes_s390.c +++ b/arch/s390/crypto/aes_s390.c @@ -516,7 +516,7 @@ static int __init aes_init(void) /* z9 109 and z9 BC/EC only support 128 bit key length */ if (keylen_flag == AES_KEYLEN_128) printk(KERN_INFO - "aes_s390: hardware acceleration only available for" + "aes_s390: hardware acceleration only available for " "128 bit keys\n"); ret = crypto_register_alg(&aes_alg); diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c index 8eb3a1aedc2..0cfefddd837 100644 --- a/arch/s390/crypto/prng.c +++ b/arch/s390/crypto/prng.c @@ -90,7 +90,7 @@ static ssize_t prng_read(struct file *file, char __user *ubuf, size_t nbytes, int ret = 0; int tmp; - /* nbytes can be arbitrary long, we spilt it into chunks */ + /* nbytes can be arbitrary length, we split it into chunks */ while (nbytes) { /* same as in extract_entropy_user in random.c */ if (need_resched()) { @@ -146,7 +146,7 @@ static ssize_t prng_read(struct file *file, char __user *ubuf, size_t nbytes, return ret; } -static struct file_operations prng_fops = { +static const struct file_operations prng_fops = { .owner = THIS_MODULE, .open = &prng_open, .release = NULL, diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index 56cb71007cd..b3b650a93c7 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -31,7 +31,3 @@ S390_KEXEC_OBJS := machine_kexec.o crash.o S390_KEXEC_OBJS += $(if $(CONFIG_64BIT),relocate_kernel64.o,relocate_kernel.o) obj-$(CONFIG_KEXEC) += $(S390_KEXEC_OBJS) -# -# This is just to get the dependencies... -# -binfmt_elf32.o: $(TOPDIR)/fs/binfmt_elf.c diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index 1b3af7dab81..9f7b73b180f 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -276,7 +276,7 @@ void __init startup_init(void) create_kernel_nss(); sort_main_extable(); setup_lowcore_early(); - sclp_readinfo_early(); + sclp_read_info_early(); sclp_facilities_detect(); memsize = sclp_memory_detect(); #ifndef CONFIG_64BIT diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index a87b1976d40..79dccd206a6 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -157,7 +157,7 @@ startup_continue: .long 0xb2b10000 # store facility list tm 0xc8,0x08 # check bit for clearing-by-ASCE bno 0f-.LPG1(%r13) - lhi %r1,2094 + lhi %r1,2048 lhi %r2,0 .long 0xb98e2001 oi 7(%r12),0x80 # set IDTE flag diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index b97694fa62e..db28cca81fe 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -2,7 +2,7 @@ * arch/s390/kernel/ipl.c * ipl/reipl/dump support for Linux on s390. * - * Copyright (C) IBM Corp. 2005,2006 + * Copyright IBM Corp. 2005,2007 * Author(s): Michael Holzheu <holzheu@de.ibm.com> * Heiko Carstens <heiko.carstens@de.ibm.com> * Volker Sameske <sameske@de.ibm.com> @@ -31,6 +31,43 @@ #define IPL_FCP_DUMP_STR "fcp_dump" #define IPL_NSS_STR "nss" +#define DUMP_CCW_STR "ccw" +#define DUMP_FCP_STR "fcp" +#define DUMP_NONE_STR "none" + +/* + * Four shutdown trigger types are supported: + * - panic + * - halt + * - power off + * - reipl + */ +#define ON_PANIC_STR "on_panic" +#define ON_HALT_STR "on_halt" +#define ON_POFF_STR "on_poff" +#define ON_REIPL_STR "on_reboot" + +struct shutdown_action; +struct shutdown_trigger { + char *name; + struct shutdown_action *action; +}; + +/* + * Five shutdown action types are supported: + */ +#define SHUTDOWN_ACTION_IPL_STR "ipl" +#define SHUTDOWN_ACTION_REIPL_STR "reipl" +#define SHUTDOWN_ACTION_DUMP_STR "dump" +#define SHUTDOWN_ACTION_VMCMD_STR "vmcmd" +#define SHUTDOWN_ACTION_STOP_STR "stop" + +struct shutdown_action { + char *name; + void (*fn) (struct shutdown_trigger *trigger); + int (*init) (void); +}; + static char *ipl_type_str(enum ipl_type type) { switch (type) { @@ -54,10 +91,6 @@ enum dump_type { DUMP_TYPE_FCP = 4, }; -#define DUMP_NONE_STR "none" -#define DUMP_CCW_STR "ccw" -#define DUMP_FCP_STR "fcp" - static char *dump_type_str(enum dump_type type) { switch (type) { @@ -99,30 +132,6 @@ enum dump_method { DUMP_METHOD_FCP_DIAG, }; -enum shutdown_action { - SHUTDOWN_REIPL, - SHUTDOWN_DUMP, - SHUTDOWN_STOP, -}; - -#define SHUTDOWN_REIPL_STR "reipl" -#define SHUTDOWN_DUMP_STR "dump" -#define SHUTDOWN_STOP_STR "stop" - -static char *shutdown_action_str(enum shutdown_action action) -{ - switch (action) { - case SHUTDOWN_REIPL: - return SHUTDOWN_REIPL_STR; - case SHUTDOWN_DUMP: - return SHUTDOWN_DUMP_STR; - case SHUTDOWN_STOP: - return SHUTDOWN_STOP_STR; - default: - return NULL; - } -} - static int diag308_set_works = 0; static int reipl_capabilities = IPL_TYPE_UNKNOWN; @@ -140,8 +149,6 @@ static enum dump_method dump_method = DUMP_METHOD_NONE; static struct ipl_parameter_block *dump_block_fcp; static struct ipl_parameter_block *dump_block_ccw; -static enum shutdown_action on_panic_action = SHUTDOWN_STOP; - static struct sclp_ipl_info sclp_ipl_info; int diag308(unsigned long subcode, void *addr) @@ -205,8 +212,8 @@ static ssize_t sys_##_prefix##_##_name##_store(struct kobject *kobj, \ struct kobj_attribute *attr, \ const char *buf, size_t len) \ { \ - if (sscanf(buf, _fmt_in, _value) != 1) \ - return -EINVAL; \ + strncpy(_value, buf, sizeof(_value) - 1); \ + strstrip(_value); \ return len; \ } \ static struct kobj_attribute sys_##_prefix##_##_name##_attr = \ @@ -245,33 +252,6 @@ static __init enum ipl_type get_ipl_type(void) return IPL_TYPE_FCP; } -void __init setup_ipl_info(void) -{ - ipl_info.type = get_ipl_type(); - switch (ipl_info.type) { - case IPL_TYPE_CCW: - ipl_info.data.ccw.dev_id.devno = ipl_devno; - ipl_info.data.ccw.dev_id.ssid = 0; - break; - case IPL_TYPE_FCP: - case IPL_TYPE_FCP_DUMP: - ipl_info.data.fcp.dev_id.devno = - IPL_PARMBLOCK_START->ipl_info.fcp.devno; - ipl_info.data.fcp.dev_id.ssid = 0; - ipl_info.data.fcp.wwpn = IPL_PARMBLOCK_START->ipl_info.fcp.wwpn; - ipl_info.data.fcp.lun = IPL_PARMBLOCK_START->ipl_info.fcp.lun; - break; - case IPL_TYPE_NSS: - strncpy(ipl_info.data.nss.name, kernel_nss_name, - sizeof(ipl_info.data.nss.name)); - break; - case IPL_TYPE_UNKNOWN: - default: - /* We have no info to copy */ - break; - } -} - struct ipl_info ipl_info; EXPORT_SYMBOL_GPL(ipl_info); @@ -428,8 +408,74 @@ static struct attribute_group ipl_unknown_attr_group = { static struct kset *ipl_kset; +static int __init ipl_register_fcp_files(void) +{ + int rc; + + rc = sysfs_create_group(&ipl_kset->kobj, &ipl_fcp_attr_group); + if (rc) + goto out; + rc = sysfs_create_bin_file(&ipl_kset->kobj, &ipl_parameter_attr); + if (rc) + goto out_ipl_parm; + rc = sysfs_create_bin_file(&ipl_kset->kobj, &ipl_scp_data_attr); + if (!rc) + goto out; + + sysfs_remove_bin_file(&ipl_kset->kobj, &ipl_parameter_attr); + +out_ipl_parm: + sysfs_remove_group(&ipl_kset->kobj, &ipl_fcp_attr_group); +out: + return rc; +} + +static void ipl_run(struct shutdown_trigger *trigger) +{ + diag308(DIAG308_IPL, NULL); + if (MACHINE_IS_VM) + __cpcmd("IPL", NULL, 0, NULL); + else if (ipl_info.type == IPL_TYPE_CCW) + reipl_ccw_dev(&ipl_info.data.ccw.dev_id); +} + +static int ipl_init(void) +{ + int rc; + + ipl_kset = kset_create_and_add("ipl", NULL, firmware_kobj); + if (!ipl_kset) { + rc = -ENOMEM; + goto out; + } + switch (ipl_info.type) { + case IPL_TYPE_CCW: + rc = sysfs_create_group(&ipl_kset->kobj, &ipl_ccw_attr_group); + break; + case IPL_TYPE_FCP: + case IPL_TYPE_FCP_DUMP: + rc = ipl_register_fcp_files(); + break; + case IPL_TYPE_NSS: + rc = sysfs_create_group(&ipl_kset->kobj, &ipl_nss_attr_group); + break; + default: + rc = sysfs_create_group(&ipl_kset->kobj, + &ipl_unknown_attr_group); + break; + } +out: + if (rc) + panic("ipl_init failed: rc = %i\n", rc); + + return 0; +} + +static struct shutdown_action ipl_action = {SHUTDOWN_ACTION_IPL_STR, ipl_run, + ipl_init}; + /* - * reipl section + * reipl shutdown action: Reboot Linux on shutdown. */ /* FCP reipl device attributes */ @@ -549,7 +595,9 @@ static int reipl_set_type(enum ipl_type type) switch(type) { case IPL_TYPE_CCW: - if (MACHINE_IS_VM) + if (diag308_set_works) + reipl_method = REIPL_METHOD_CCW_DIAG; + else if (MACHINE_IS_VM) reipl_method = REIPL_METHOD_CCW_VM; else reipl_method = REIPL_METHOD_CCW_CIO; @@ -600,143 +648,11 @@ static ssize_t reipl_type_store(struct kobject *kobj, } static struct kobj_attribute reipl_type_attr = - __ATTR(reipl_type, 0644, reipl_type_show, reipl_type_store); + __ATTR(reipl_type, 0644, reipl_type_show, reipl_type_store); static struct kset *reipl_kset; -/* - * dump section - */ - -/* FCP dump device attributes */ - -DEFINE_IPL_ATTR_RW(dump_fcp, wwpn, "0x%016llx\n", "%016llx\n", - dump_block_fcp->ipl_info.fcp.wwpn); -DEFINE_IPL_ATTR_RW(dump_fcp, lun, "0x%016llx\n", "%016llx\n", - dump_block_fcp->ipl_info.fcp.lun); -DEFINE_IPL_ATTR_RW(dump_fcp, bootprog, "%lld\n", "%lld\n", - dump_block_fcp->ipl_info.fcp.bootprog); -DEFINE_IPL_ATTR_RW(dump_fcp, br_lba, "%lld\n", "%lld\n", - dump_block_fcp->ipl_info.fcp.br_lba); -DEFINE_IPL_ATTR_RW(dump_fcp, device, "0.0.%04llx\n", "0.0.%llx\n", - dump_block_fcp->ipl_info.fcp.devno); - -static struct attribute *dump_fcp_attrs[] = { - &sys_dump_fcp_device_attr.attr, - &sys_dump_fcp_wwpn_attr.attr, - &sys_dump_fcp_lun_attr.attr, - &sys_dump_fcp_bootprog_attr.attr, - &sys_dump_fcp_br_lba_attr.attr, - NULL, -}; - -static struct attribute_group dump_fcp_attr_group = { - .name = IPL_FCP_STR, - .attrs = dump_fcp_attrs, -}; - -/* CCW dump device attributes */ - -DEFINE_IPL_ATTR_RW(dump_ccw, device, "0.0.%04llx\n", "0.0.%llx\n", - dump_block_ccw->ipl_info.ccw.devno); - -static struct attribute *dump_ccw_attrs[] = { - &sys_dump_ccw_device_attr.attr, - NULL, -}; - -static struct attribute_group dump_ccw_attr_group = { - .name = IPL_CCW_STR, - .attrs = dump_ccw_attrs, -}; - -/* dump type */ - -static int dump_set_type(enum dump_type type) -{ - if (!(dump_capabilities & type)) - return -EINVAL; - switch(type) { - case DUMP_TYPE_CCW: - if (MACHINE_IS_VM) - dump_method = DUMP_METHOD_CCW_VM; - else if (diag308_set_works) - dump_method = DUMP_METHOD_CCW_DIAG; - else - dump_method = DUMP_METHOD_CCW_CIO; - break; - case DUMP_TYPE_FCP: - dump_method = DUMP_METHOD_FCP_DIAG; - break; - default: - dump_method = DUMP_METHOD_NONE; - } - dump_type = type; - return 0; -} - -static ssize_t dump_type_show(struct kobject *kobj, - struct kobj_attribute *attr, char *page) -{ - return sprintf(page, "%s\n", dump_type_str(dump_type)); -} - -static ssize_t dump_type_store(struct kobject *kobj, - struct kobj_attribute *attr, - const char *buf, size_t len) -{ - int rc = -EINVAL; - - if (strncmp(buf, DUMP_NONE_STR, strlen(DUMP_NONE_STR)) == 0) - rc = dump_set_type(DUMP_TYPE_NONE); - else if (strncmp(buf, DUMP_CCW_STR, strlen(DUMP_CCW_STR)) == 0) - rc = dump_set_type(DUMP_TYPE_CCW); - else if (strncmp(buf, DUMP_FCP_STR, strlen(DUMP_FCP_STR)) == 0) - rc = dump_set_type(DUMP_TYPE_FCP); - return (rc != 0) ? rc : len; -} - -static struct kobj_attribute dump_type_attr = - __ATTR(dump_type, 0644, dump_type_show, dump_type_store); - -static struct kset *dump_kset; - -/* - * Shutdown actions section - */ - -static struct kset *shutdown_actions_kset; - -/* on panic */ - -static ssize_t on_panic_show(struct kobject *kobj, - struct kobj_attribute *attr, char *page) -{ - return sprintf(page, "%s\n", shutdown_action_str(on_panic_action)); -} - -static ssize_t on_panic_store(struct kobject *kobj, - struct kobj_attribute *attr, - const char *buf, size_t len) -{ - if (strncmp(buf, SHUTDOWN_REIPL_STR, strlen(SHUTDOWN_REIPL_STR)) == 0) - on_panic_action = SHUTDOWN_REIPL; - else if (strncmp(buf, SHUTDOWN_DUMP_STR, - strlen(SHUTDOWN_DUMP_STR)) == 0) - on_panic_action = SHUTDOWN_DUMP; - else if (strncmp(buf, SHUTDOWN_STOP_STR, - strlen(SHUTDOWN_STOP_STR)) == 0) - on_panic_action = SHUTDOWN_STOP; - else - return -EINVAL; - - return len; -} - -static struct kobj_attribute on_panic_attr = - __ATTR(on_panic, 0644, on_panic_show, on_panic_store); - -void do_reipl(void) +void reipl_run(struct shutdown_trigger *trigger) { struct ccw_dev_id devid; static char buf[100]; @@ -745,8 +661,6 @@ void do_reipl(void) switch (reipl_method) { case REIPL_METHOD_CCW_CIO: devid.devno = reipl_block_ccw->ipl_info.ccw.devno; - if (ipl_info.type == IPL_TYPE_CCW && devid.devno == ipl_devno) - diag308(DIAG308_IPL, NULL); devid.ssid = 0; reipl_ccw_dev(&devid); break; @@ -787,98 +701,6 @@ void do_reipl(void) default: break; } - signal_processor(smp_processor_id(), sigp_stop_and_store_status); -} - -static void do_dump(void) -{ - struct ccw_dev_id devid; - static char buf[100]; - - switch (dump_method) { - case DUMP_METHOD_CCW_CIO: - smp_send_stop(); - devid.devno = dump_block_ccw->ipl_info.ccw.devno; - devid.ssid = 0; - reipl_ccw_dev(&devid); - break; - case DUMP_METHOD_CCW_VM: - smp_send_stop(); - sprintf(buf, "STORE STATUS"); - __cpcmd(buf, NULL, 0, NULL); - sprintf(buf, "IPL %X", dump_block_ccw->ipl_info.ccw.devno); - __cpcmd(buf, NULL, 0, NULL); - break; - case DUMP_METHOD_CCW_DIAG: - diag308(DIAG308_SET, dump_block_ccw); - diag308(DIAG308_DUMP, NULL); - break; - case DUMP_METHOD_FCP_DIAG: - diag308(DIAG308_SET, dump_block_fcp); - diag308(DIAG308_DUMP, NULL); - break; - case DUMP_METHOD_NONE: - default: - return; - } - printk(KERN_EMERG "Dump failed!\n"); -} - -/* init functions */ - -static int __init ipl_register_fcp_files(void) -{ - int rc; - - rc = sysfs_create_group(&ipl_kset->kobj, - &ipl_fcp_attr_group); - if (rc) - goto out; - rc = sysfs_create_bin_file(&ipl_kset->kobj, - &ipl_parameter_attr); - if (rc) - goto out_ipl_parm; - rc = sysfs_create_bin_file(&ipl_kset->kobj, - &ipl_scp_data_attr); - if (!rc) - goto out; - - sysfs_remove_bin_file(&ipl_kset->kobj, &ipl_parameter_attr); - -out_ipl_parm: - sysfs_remove_group(&ipl_kset->kobj, &ipl_fcp_attr_group); -out: - return rc; -} - -static int __init ipl_init(void) -{ - int rc; - - ipl_kset = kset_create_and_add("ipl", NULL, firmware_kobj); - if (!ipl_kset) - return -ENOMEM; - switch (ipl_info.type) { - case IPL_TYPE_CCW: - rc = sysfs_create_group(&ipl_kset->kobj, - &ipl_ccw_attr_group); - break; - case IPL_TYPE_FCP: - case IPL_TYPE_FCP_DUMP: - rc = ipl_register_fcp_files(); - break; - case IPL_TYPE_NSS: - rc = sysfs_create_group(&ipl_kset->kobj, - &ipl_nss_attr_group); - break; - default: - rc = sysfs_create_group(&ipl_kset->kobj, - &ipl_unknown_attr_group); - break; - } - if (rc) - kset_unregister(ipl_kset); - return rc; } static void __init reipl_probe(void) @@ -923,6 +745,7 @@ static int __init reipl_ccw_init(void) reipl_block_ccw->hdr.version = IPL_PARM_BLOCK_VERSION; reipl_block_ccw->hdr.blk0_len = IPL_PARM_BLK0_CCW_LEN; reipl_block_ccw->hdr.pbt = DIAG308_IPL_TYPE_CCW; + reipl_block_ccw->hdr.flags = DIAG308_FLAGS_LP_VALID; /* check if read scp info worked and set loadparm */ if (sclp_ipl_info.is_valid) memcpy(reipl_block_ccw->ipl_info.ccw.load_param, @@ -931,8 +754,7 @@ static int __init reipl_ccw_init(void) /* read scp info failed: set empty loadparm (EBCDIC blanks) */ memset(reipl_block_ccw->ipl_info.ccw.load_param, 0x40, LOADPARM_LEN); - /* FIXME: check for diag308_set_works when enabling diag ccw reipl */ - if (!MACHINE_IS_VM) + if (!MACHINE_IS_VM && !diag308_set_works) sys_reipl_ccw_loadparm_attr.attr.mode = S_IRUGO; if (ipl_info.type == IPL_TYPE_CCW) reipl_block_ccw->ipl_info.ccw.devno = ipl_devno; @@ -970,7 +792,7 @@ static int __init reipl_fcp_init(void) return 0; } -static int __init reipl_init(void) +static int reipl_init(void) { int rc; @@ -997,6 +819,140 @@ static int __init reipl_init(void) return 0; } +static struct shutdown_action reipl_action = {SHUTDOWN_ACTION_REIPL_STR, + reipl_run, reipl_init}; + +/* + * dump shutdown action: Dump Linux on shutdown. + */ + +/* FCP dump device attributes */ + +DEFINE_IPL_ATTR_RW(dump_fcp, wwpn, "0x%016llx\n", "%016llx\n", + dump_block_fcp->ipl_info.fcp.wwpn); +DEFINE_IPL_ATTR_RW(dump_fcp, lun, "0x%016llx\n", "%016llx\n", + dump_block_fcp->ipl_info.fcp.lun); +DEFINE_IPL_ATTR_RW(dump_fcp, bootprog, "%lld\n", "%lld\n", + dump_block_fcp->ipl_info.fcp.bootprog); +DEFINE_IPL_ATTR_RW(dump_fcp, br_lba, "%lld\n", "%lld\n", + dump_block_fcp->ipl_info.fcp.br_lba); +DEFINE_IPL_ATTR_RW(dump_fcp, device, "0.0.%04llx\n", "0.0.%llx\n", + dump_block_fcp->ipl_info.fcp.devno); + +static struct attribute *dump_fcp_attrs[] = { + &sys_dump_fcp_device_attr.attr, + &sys_dump_fcp_wwpn_attr.attr, + &sys_dump_fcp_lun_attr.attr, + &sys_dump_fcp_bootprog_attr.attr, + &sys_dump_fcp_br_lba_attr.attr, + NULL, +}; + +static struct attribute_group dump_fcp_attr_group = { + .name = IPL_FCP_STR, + .attrs = dump_fcp_attrs, +}; + +/* CCW dump device attributes */ + +DEFINE_IPL_ATTR_RW(dump_ccw, device, "0.0.%04llx\n", "0.0.%llx\n", + dump_block_ccw->ipl_info.ccw.devno); + +static struct attribute *dump_ccw_attrs[] = { + &sys_dump_ccw_device_attr.attr, + NULL, +}; + +static struct attribute_group dump_ccw_attr_group = { + .name = IPL_CCW_STR, + .attrs = dump_ccw_attrs, +}; + +/* dump type */ + +static int dump_set_type(enum dump_type type) +{ + if (!(dump_capabilities & type)) + return -EINVAL; + switch (type) { + case DUMP_TYPE_CCW: + if (diag308_set_works) + dump_method = DUMP_METHOD_CCW_DIAG; + else if (MACHINE_IS_VM) + dump_method = DUMP_METHOD_CCW_VM; + else + dump_method = DUMP_METHOD_CCW_CIO; + break; + case DUMP_TYPE_FCP: + dump_method = DUMP_METHOD_FCP_DIAG; + break; + default: + dump_method = DUMP_METHOD_NONE; + } + dump_type = type; + return 0; +} + +static ssize_t dump_type_show(struct kobject *kobj, + struct kobj_attribute *attr, char *page) +{ + return sprintf(page, "%s\n", dump_type_str(dump_type)); +} + +static ssize_t dump_type_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t len) +{ + int rc = -EINVAL; + + if (strncmp(buf, DUMP_NONE_STR, strlen(DUMP_NONE_STR)) == 0) + rc = dump_set_type(DUMP_TYPE_NONE); + else if (strncmp(buf, DUMP_CCW_STR, strlen(DUMP_CCW_STR)) == 0) + rc = dump_set_type(DUMP_TYPE_CCW); + else if (strncmp(buf, DUMP_FCP_STR, strlen(DUMP_FCP_STR)) == 0) + rc = dump_set_type(DUMP_TYPE_FCP); + return (rc != 0) ? rc : len; +} + +static struct kobj_attribute dump_type_attr = + __ATTR(dump_type, 0644, dump_type_show, dump_type_store); + +static struct kset *dump_kset; + +static void dump_run(struct shutdown_trigger *trigger) +{ + struct ccw_dev_id devid; + static char buf[100]; + + switch (dump_method) { + case DUMP_METHOD_CCW_CIO: + smp_send_stop(); + devid.devno = dump_block_ccw->ipl_info.ccw.devno; + devid.ssid = 0; + reipl_ccw_dev(&devid); + break; + case DUMP_METHOD_CCW_VM: + smp_send_stop(); + sprintf(buf, "STORE STATUS"); + __cpcmd(buf, NULL, 0, NULL); + sprintf(buf, "IPL %X", dump_block_ccw->ipl_info.ccw.devno); + __cpcmd(buf, NULL, 0, NULL); + break; + case DUMP_METHOD_CCW_DIAG: + diag308(DIAG308_SET, dump_block_ccw); + diag308(DIAG308_DUMP, NULL); + break; + case DUMP_METHOD_FCP_DIAG: + diag308(DIAG308_SET, dump_block_fcp); + diag308(DIAG308_DUMP, NULL); + break; + case DUMP_METHOD_NONE: + default: + return; + } + printk(KERN_EMERG "Dump failed!\n"); +} + static int __init dump_ccw_init(void) { int rc; @@ -1042,31 +998,14 @@ static int __init dump_fcp_init(void) return 0; } -#define SHUTDOWN_ON_PANIC_PRIO 0 - -static int shutdown_on_panic_notify(struct notifier_block *self, - unsigned long event, void *data) -{ - if (on_panic_action == SHUTDOWN_DUMP) - do_dump(); - else if (on_panic_action == SHUTDOWN_REIPL) - do_reipl(); - return NOTIFY_OK; -} - -static struct notifier_block shutdown_on_panic_nb = { - .notifier_call = shutdown_on_panic_notify, - .priority = SHUTDOWN_ON_PANIC_PRIO -}; - -static int __init dump_init(void) +static int dump_init(void) { int rc; dump_kset = kset_create_and_add("dump", NULL, firmware_kobj); if (!dump_kset) return -ENOMEM; - rc = sysfs_create_file(&dump_kset->kobj, &dump_type_attr); + rc = sysfs_create_file(&dump_kset->kobj, &dump_type_attr.attr); if (rc) { kset_unregister(dump_kset); return rc; @@ -1081,47 +1020,381 @@ static int __init dump_init(void) return 0; } -static int __init shutdown_actions_init(void) +static struct shutdown_action dump_action = {SHUTDOWN_ACTION_DUMP_STR, + dump_run, dump_init}; + +/* + * vmcmd shutdown action: Trigger vm command on shutdown. + */ + +static char vmcmd_on_reboot[128]; +static char vmcmd_on_panic[128]; +static char vmcmd_on_halt[128]; +static char vmcmd_on_poff[128]; + +DEFINE_IPL_ATTR_STR_RW(vmcmd, on_reboot, "%s\n", "%s\n", vmcmd_on_reboot); +DEFINE_IPL_ATTR_STR_RW(vmcmd, on_panic, "%s\n", "%s\n", vmcmd_on_panic); +DEFINE_IPL_ATTR_STR_RW(vmcmd, on_halt, "%s\n", "%s\n", vmcmd_on_halt); +DEFINE_IPL_ATTR_STR_RW(vmcmd, on_poff, "%s\n", "%s\n", vmcmd_on_poff); + +static struct attribute *vmcmd_attrs[] = { + &sys_vmcmd_on_reboot_attr.attr, + &sys_vmcmd_on_panic_attr.attr, + &sys_vmcmd_on_halt_attr.attr, + &sys_vmcmd_on_poff_attr.attr, + NULL, +}; + +static struct attribute_group vmcmd_attr_group = { + .attrs = vmcmd_attrs, +}; + +static struct kset *vmcmd_kset; + +static void vmcmd_run(struct shutdown_trigger *trigger) +{ + char *cmd, *next_cmd; + + if (strcmp(trigger->name, ON_REIPL_STR) == 0) + cmd = vmcmd_on_reboot; + else if (strcmp(trigger->name, ON_PANIC_STR) == 0) + cmd = vmcmd_on_panic; + else if (strcmp(trigger->name, ON_HALT_STR) == 0) + cmd = vmcmd_on_halt; + else if (strcmp(trigger->name, ON_POFF_STR) == 0) + cmd = vmcmd_on_poff; + else + return; + + if (strlen(cmd) == 0) + return; + do { + next_cmd = strchr(cmd, '\n'); + if (next_cmd) { + next_cmd[0] = 0; + next_cmd += 1; + } + __cpcmd(cmd, NULL, 0, NULL); + cmd = next_cmd; + } while (cmd != NULL); +} + +static int vmcmd_init(void) { - int rc; + if (!MACHINE_IS_VM) + return -ENOTSUPP; + vmcmd_kset = kset_create_and_add("vmcmd", NULL, firmware_kobj); + if (!vmcmd_kset) + return -ENOMEM; + return sysfs_create_group(&vmcmd_kset->kobj, &vmcmd_attr_group); +} + +static struct shutdown_action vmcmd_action = {SHUTDOWN_ACTION_VMCMD_STR, + vmcmd_run, vmcmd_init}; + +/* + * stop shutdown action: Stop Linux on shutdown. + */ + +static void stop_run(struct shutdown_trigger *trigger) +{ + if (strcmp(trigger->name, ON_PANIC_STR) == 0) + disabled_wait((unsigned long) __builtin_return_address(0)); + else { + signal_processor(smp_processor_id(), sigp_stop); + for (;;); + } +} + +static struct shutdown_action stop_action = {SHUTDOWN_ACTION_STOP_STR, + stop_run, NULL}; + +/* action list */ + +static struct shutdown_action *shutdown_actions_list[] = { + &ipl_action, &reipl_action, &dump_action, &vmcmd_action, &stop_action}; +#define SHUTDOWN_ACTIONS_COUNT (sizeof(shutdown_actions_list) / sizeof(void *)) + +/* + * Trigger section + */ + +static struct kset *shutdown_actions_kset; + +static int set_trigger(const char *buf, struct shutdown_trigger *trigger, + size_t len) +{ + int i; + for (i = 0; i < SHUTDOWN_ACTIONS_COUNT; i++) { + if (!shutdown_actions_list[i]) + continue; + if (strncmp(buf, shutdown_actions_list[i]->name, + strlen(shutdown_actions_list[i]->name)) == 0) { + trigger->action = shutdown_actions_list[i]; + return len; + } + } + return -EINVAL; +} + +/* on reipl */ + +static struct shutdown_trigger on_reboot_trigger = {ON_REIPL_STR, + &reipl_action}; + +static ssize_t on_reboot_show(struct kobject *kobj, + struct kobj_attribute *attr, char *page) +{ + return sprintf(page, "%s\n", on_reboot_trigger.action->name); +} + +static ssize_t on_reboot_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t len) +{ + return set_trigger(buf, &on_reboot_trigger, len); +} + +static struct kobj_attribute on_reboot_attr = + __ATTR(on_reboot, 0644, on_reboot_show, on_reboot_store); + +static void do_machine_restart(char *__unused) +{ + smp_send_stop(); + on_reboot_trigger.action->fn(&on_reboot_trigger); + reipl_run(NULL); +} +void (*_machine_restart)(char *command) = do_machine_restart; + +/* on panic */ + +static struct shutdown_trigger on_panic_trigger = {ON_PANIC_STR, &stop_action}; + +static ssize_t on_panic_show(struct kobject *kobj, + struct kobj_attribute *attr, char *page) +{ + return sprintf(page, "%s\n", on_panic_trigger.action->name); +} +static ssize_t on_panic_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t len) +{ + return set_trigger(buf, &on_panic_trigger, len); +} + +static struct kobj_attribute on_panic_attr = + __ATTR(on_panic, 0644, on_panic_show, on_panic_store); + +static void do_panic(void) +{ + on_panic_trigger.action->fn(&on_panic_trigger); + stop_run(&on_panic_trigger); +} + +/* on halt */ + +static struct shutdown_trigger on_halt_trigger = {ON_HALT_STR, &stop_action}; + +static ssize_t on_halt_show(struct kobject *kobj, + struct kobj_attribute *attr, char *page) +{ + return sprintf(page, "%s\n", on_halt_trigger.action->name); +} + +static ssize_t on_halt_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t len) +{ + return set_trigger(buf, &on_halt_trigger, len); +} + +static struct kobj_attribute on_halt_attr = + __ATTR(on_halt, 0644, on_halt_show, on_halt_store); + + +static void do_machine_halt(void) +{ + smp_send_stop(); + on_halt_trigger.action->fn(&on_halt_trigger); + stop_run(&on_halt_trigger); +} +void (*_machine_halt)(void) = do_machine_halt; + +/* on power off */ + +static struct shutdown_trigger on_poff_trigger = {ON_POFF_STR, &stop_action}; + +static ssize_t on_poff_show(struct kobject *kobj, + struct kobj_attribute *attr, char *page) +{ + return sprintf(page, "%s\n", on_poff_trigger.action->name); +} + +static ssize_t on_poff_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t len) +{ + return set_trigger(buf, &on_poff_trigger, len); +} + +static struct kobj_attribute on_poff_attr = + __ATTR(on_poff, 0644, on_poff_show, on_poff_store); + + +static void do_machine_power_off(void) +{ + smp_send_stop(); + on_poff_trigger.action->fn(&on_poff_trigger); + stop_run(&on_poff_trigger); +} +void (*_machine_power_off)(void) = do_machine_power_off; + +static void __init shutdown_triggers_init(void) +{ shutdown_actions_kset = kset_create_and_add("shutdown_actions", NULL, firmware_kobj); if (!shutdown_actions_kset) - return -ENOMEM; - rc = sysfs_create_file(&shutdown_actions_kset->kobj, &on_panic_attr); - if (rc) { - kset_unregister(shutdown_actions_kset); - return rc; + goto fail; + if (sysfs_create_file(&shutdown_actions_kset->kobj, + &on_reboot_attr.attr)) + goto fail; + if (sysfs_create_file(&shutdown_actions_kset->kobj, + &on_panic_attr.attr)) + goto fail; + if (sysfs_create_file(&shutdown_actions_kset->kobj, + &on_halt_attr.attr)) + goto fail; + if (sysfs_create_file(&shutdown_actions_kset->kobj, + &on_poff_attr.attr)) + goto fail; + + return; +fail: + panic("shutdown_triggers_init failed\n"); +} + +static void __init shutdown_actions_init(void) +{ + int i; + + for (i = 0; i < SHUTDOWN_ACTIONS_COUNT; i++) { + if (!shutdown_actions_list[i]->init) + continue; + if (shutdown_actions_list[i]->init()) + shutdown_actions_list[i] = NULL; } - atomic_notifier_chain_register(&panic_notifier_list, - &shutdown_on_panic_nb); - return 0; } static int __init s390_ipl_init(void) { - int rc; - - sclp_get_ipl_info(&sclp_ipl_info); reipl_probe(); - rc = ipl_init(); - if (rc) - return rc; - rc = reipl_init(); - if (rc) - return rc; - rc = dump_init(); - if (rc) - return rc; - rc = shutdown_actions_init(); - if (rc) - return rc; + sclp_get_ipl_info(&sclp_ipl_info); + shutdown_actions_init(); + shutdown_triggers_init(); return 0; } __initcall(s390_ipl_init); +static void __init strncpy_skip_quote(char *dst, char *src, int n) +{ + int sx, dx; + + dx = 0; + for (sx = 0; src[sx] != 0; sx++) { + if (src[sx] == '"') + continue; + dst[dx++] = src[sx]; + if (dx >= n) + break; + } +} + +static int __init vmcmd_on_reboot_setup(char *str) +{ + if (!MACHINE_IS_VM) + return 1; + strncpy_skip_quote(vmcmd_on_reboot, str, 127); + vmcmd_on_reboot[127] = 0; + on_reboot_trigger.action = &vmcmd_action; + return 1; +} +__setup("vmreboot=", vmcmd_on_reboot_setup); + +static int __init vmcmd_on_panic_setup(char *str) +{ + if (!MACHINE_IS_VM) + return 1; + strncpy_skip_quote(vmcmd_on_panic, str, 127); + vmcmd_on_panic[127] = 0; + on_panic_trigger.action = &vmcmd_action; + return 1; +} +__setup("vmpanic=", vmcmd_on_panic_setup); + +static int __init vmcmd_on_halt_setup(char *str) +{ + if (!MACHINE_IS_VM) + return 1; + strncpy_skip_quote(vmcmd_on_halt, str, 127); + vmcmd_on_halt[127] = 0; + on_halt_trigger.action = &vmcmd_action; + return 1; +} +__setup("vmhalt=", vmcmd_on_halt_setup); + +static int __init vmcmd_on_poff_setup(char *str) +{ + if (!MACHINE_IS_VM) + return 1; + strncpy_skip_quote(vmcmd_on_poff, str, 127); + vmcmd_on_poff[127] = 0; + on_poff_trigger.action = &vmcmd_action; + return 1; +} +__setup("vmpoff=", vmcmd_on_poff_setup); + +static int on_panic_notify(struct notifier_block *self, + unsigned long event, void *data) +{ + do_panic(); + return NOTIFY_OK; +} + +static struct notifier_block on_panic_nb = { + .notifier_call = on_panic_notify, + .priority = 0, +}; + +void __init setup_ipl(void) +{ + ipl_info.type = get_ipl_type(); + switch (ipl_info.type) { + case IPL_TYPE_CCW: + ipl_info.data.ccw.dev_id.devno = ipl_devno; + ipl_info.data.ccw.dev_id.ssid = 0; + break; + case IPL_TYPE_FCP: + case IPL_TYPE_FCP_DUMP: + ipl_info.data.fcp.dev_id.devno = + IPL_PARMBLOCK_START->ipl_info.fcp.devno; + ipl_info.data.fcp.dev_id.ssid = 0; + ipl_info.data.fcp.wwpn = IPL_PARMBLOCK_START->ipl_info.fcp.wwpn; + ipl_info.data.fcp.lun = IPL_PARMBLOCK_START->ipl_info.fcp.lun; + break; + case IPL_TYPE_NSS: + strncpy(ipl_info.data.nss.name, kernel_nss_name, + sizeof(ipl_info.data.nss.name)); + break; + case IPL_TYPE_UNKNOWN: + default: + /* We have no info to copy */ + break; + } + atomic_notifier_chain_register(&panic_notifier_list, &on_panic_nb); +} + void __init ipl_save_parameters(void) { struct cio_iplinfo iplinfo; @@ -1202,3 +1475,4 @@ void s390_reset_system(void) do_reset_calls(); } + diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index 29f7884b4ff..0e7aca03930 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -36,7 +36,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/notifier.h> - +#include <linux/utsname.h> #include <asm/uaccess.h> #include <asm/pgtable.h> #include <asm/system.h> @@ -182,13 +182,15 @@ void cpu_idle(void) void show_regs(struct pt_regs *regs) { - struct task_struct *tsk = current; - - printk("CPU: %d %s\n", task_thread_info(tsk)->cpu, print_tainted()); - printk("Process %s (pid: %d, task: %p, ksp: %p)\n", - current->comm, task_pid_nr(current), (void *) tsk, - (void *) tsk->thread.ksp); - + print_modules(); + printk("CPU: %d %s %s %.*s\n", + task_thread_info(current)->cpu, print_tainted(), + init_utsname()->release, + (int)strcspn(init_utsname()->version, " "), + init_utsname()->version); + printk("Process %s (pid: %d, task: %p, ksp: %p)\n", + current->comm, current->pid, current, + (void *) current->thread.ksp); show_registers(regs); /* Show stack backtrace if pt_regs is from kernel mode */ if (!(regs->psw.mask & PSW_MASK_PSTATE)) diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 1d81bf9488a..6e036bae987 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -86,13 +86,13 @@ FixPerRegisters(struct task_struct *task) per_info->control_regs.bits.storage_alt_space_ctl = 0; } -static void set_single_step(struct task_struct *task) +void user_enable_single_step(struct task_struct *task) { task->thread.per_info.single_step = 1; FixPerRegisters(task); } -static void clear_single_step(struct task_struct *task) +void user_disable_single_step(struct task_struct *task) { task->thread.per_info.single_step = 0; FixPerRegisters(task); @@ -107,7 +107,7 @@ void ptrace_disable(struct task_struct *child) { /* make sure the single step bit is not set. */ - clear_single_step(child); + user_disable_single_step(child); } #ifndef CONFIG_64BIT @@ -651,7 +651,7 @@ do_ptrace(struct task_struct *child, long request, long addr, long data) clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); child->exit_code = data; /* make sure the single step bit is not set. */ - clear_single_step(child); + user_disable_single_step(child); wake_up_process(child); return 0; @@ -665,7 +665,7 @@ do_ptrace(struct task_struct *child, long request, long addr, long data) return 0; child->exit_code = SIGKILL; /* make sure the single step bit is not set. */ - clear_single_step(child); + user_disable_single_step(child); wake_up_process(child); return 0; @@ -675,10 +675,7 @@ do_ptrace(struct task_struct *child, long request, long addr, long data) return -EIO; clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); child->exit_code = data; - if (data) - set_tsk_thread_flag(child, TIF_SINGLE_STEP); - else - set_single_step(child); + user_enable_single_step(child); /* give it a chance to run. */ wake_up_process(child); return 0; diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 577aa7dd660..766c783bd7a 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -126,75 +126,6 @@ void __cpuinit cpu_init(void) } /* - * VM halt and poweroff setup routines - */ -char vmhalt_cmd[128] = ""; -char vmpoff_cmd[128] = ""; -static char vmpanic_cmd[128] = ""; - -static void strncpy_skip_quote(char *dst, char *src, int n) -{ - int sx, dx; - - dx = 0; - for (sx = 0; src[sx] != 0; sx++) { - if (src[sx] == '"') continue; - dst[dx++] = src[sx]; - if (dx >= n) break; - } -} - -static int __init vmhalt_setup(char *str) -{ - strncpy_skip_quote(vmhalt_cmd, str, 127); - vmhalt_cmd[127] = 0; - return 1; -} - -__setup("vmhalt=", vmhalt_setup); - -static int __init vmpoff_setup(char *str) -{ - strncpy_skip_quote(vmpoff_cmd, str, 127); - vmpoff_cmd[127] = 0; - return 1; -} - -__setup("vmpoff=", vmpoff_setup); - -static int vmpanic_notify(struct notifier_block *self, unsigned long event, - void *data) -{ - if (MACHINE_IS_VM && strlen(vmpanic_cmd) > 0) - cpcmd(vmpanic_cmd, NULL, 0, NULL); - - return NOTIFY_OK; -} - -#define PANIC_PRI_VMPANIC 0 - -static struct notifier_block vmpanic_nb = { - .notifier_call = vmpanic_notify, - .priority = PANIC_PRI_VMPANIC -}; - -static int __init vmpanic_setup(char *str) -{ - static int register_done __initdata = 0; - - strncpy_skip_quote(vmpanic_cmd, str, 127); - vmpanic_cmd[127] = 0; - if (!register_done) { - register_done = 1; - atomic_notifier_chain_register(&panic_notifier_list, - &vmpanic_nb); - } - return 1; -} - -__setup("vmpanic=", vmpanic_setup); - -/* * condev= and conmode= setup parameter. */ @@ -308,38 +239,6 @@ static void __init setup_zfcpdump(unsigned int console_devno) static inline void setup_zfcpdump(unsigned int console_devno) {} #endif /* CONFIG_ZFCPDUMP */ -#ifdef CONFIG_SMP -void (*_machine_restart)(char *command) = machine_restart_smp; -void (*_machine_halt)(void) = machine_halt_smp; -void (*_machine_power_off)(void) = machine_power_off_smp; -#else -/* - * Reboot, halt and power_off routines for non SMP. - */ -static void do_machine_restart_nonsmp(char * __unused) -{ - do_reipl(); -} - -static void do_machine_halt_nonsmp(void) -{ - if (MACHINE_IS_VM && strlen(vmhalt_cmd) > 0) - __cpcmd(vmhalt_cmd, NULL, 0, NULL); - signal_processor(smp_processor_id(), sigp_stop_and_store_status); -} - -static void do_machine_power_off_nonsmp(void) -{ - if (MACHINE_IS_VM && strlen(vmpoff_cmd) > 0) - __cpcmd(vmpoff_cmd, NULL, 0, NULL); - signal_processor(smp_processor_id(), sigp_stop_and_store_status); -} - -void (*_machine_restart)(char *command) = do_machine_restart_nonsmp; -void (*_machine_halt)(void) = do_machine_halt_nonsmp; -void (*_machine_power_off)(void) = do_machine_power_off_nonsmp; -#endif - /* * Reboot, halt and power_off stubs. They just call _machine_restart, * _machine_halt or _machine_power_off. @@ -559,7 +458,9 @@ setup_resources(void) data_resource.start = (unsigned long) &_etext; data_resource.end = (unsigned long) &_edata - 1; - for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) { + for (i = 0; i < MEMORY_CHUNKS; i++) { + if (!memory_chunk[i].size) + continue; res = alloc_bootmem_low(sizeof(struct resource)); res->flags = IORESOURCE_BUSY | IORESOURCE_MEM; switch (memory_chunk[i].type) { @@ -617,7 +518,7 @@ EXPORT_SYMBOL_GPL(real_memory_size); static void __init setup_memory_end(void) { unsigned long memory_size; - unsigned long max_mem, max_phys; + unsigned long max_mem; int i; #if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE) @@ -625,10 +526,31 @@ static void __init setup_memory_end(void) memory_end = ZFCPDUMP_HSA_SIZE; #endif memory_size = 0; - max_phys = VMALLOC_END_INIT - VMALLOC_MIN_SIZE; memory_end &= PAGE_MASK; - max_mem = memory_end ? min(max_phys, memory_end) : max_phys; + max_mem = memory_end ? min(VMALLOC_START, memory_end) : VMALLOC_START; + memory_end = min(max_mem, memory_end); + + /* + * Make sure all chunks are MAX_ORDER aligned so we don't need the + * extra checks that HOLES_IN_ZONE would require. + */ + for (i = 0; i < MEMORY_CHUNKS; i++) { + unsigned long start, end; + struct mem_chunk *chunk; + unsigned long align; + + chunk = &memory_chunk[i]; + align = 1UL << (MAX_ORDER + PAGE_SHIFT - 1); + start = (chunk->addr + align - 1) & ~(align - 1); + end = (chunk->addr + chunk->size) & ~(align - 1); + if (start >= end) + memset(chunk, 0, sizeof(*chunk)); + else { + chunk->addr = start; + chunk->size = end - start; + } + } for (i = 0; i < MEMORY_CHUNKS; i++) { struct mem_chunk *chunk = &memory_chunk[i]; @@ -890,7 +812,7 @@ setup_arch(char **cmdline_p) parse_early_param(); - setup_ipl_info(); + setup_ipl(); setup_memory_end(); setup_addressing_mode(); setup_memory(); @@ -899,7 +821,6 @@ setup_arch(char **cmdline_p) cpu_init(); __cpu_logical_map[0] = S390_lowcore.cpu_data.cpu_addr; - smp_setup_cpu_possible_map(); /* * Setup capabilities (ELF_HWCAP & ELF_PLATFORM). @@ -920,7 +841,7 @@ setup_arch(char **cmdline_p) void __cpuinit print_cpu_info(struct cpuinfo_S390 *cpuinfo) { - printk("cpu %d " + printk(KERN_INFO "cpu %d " #ifdef CONFIG_SMP "phys_idx=%d " #endif @@ -996,7 +917,7 @@ static void *c_next(struct seq_file *m, void *v, loff_t *pos) static void c_stop(struct seq_file *m, void *v) { } -struct seq_operations cpuinfo_op = { +const struct seq_operations cpuinfo_op = { .start = c_start, .next = c_next, .stop = c_stop, diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index d264671c1b7..4449bf32cbf 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -471,6 +471,7 @@ void do_signal(struct pt_regs *regs) if (signr > 0) { /* Whee! Actually deliver the signal. */ + int ret; #ifdef CONFIG_COMPAT if (test_thread_flag(TIF_31BIT)) { extern int handle_signal32(unsigned long sig, @@ -478,15 +479,12 @@ void do_signal(struct pt_regs *regs) siginfo_t *info, sigset_t *oldset, struct pt_regs *regs); - if (handle_signal32( - signr, &ka, &info, oldset, regs) == 0) { - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - clear_thread_flag(TIF_RESTORE_SIGMASK); - } - return; + ret = handle_signal32(signr, &ka, &info, oldset, regs); } + else #endif - if (handle_signal(signr, &ka, &info, oldset, regs) == 0) { + ret = handle_signal(signr, &ka, &info, oldset, regs); + if (!ret) { /* * A signal was successfully delivered; the saved * sigmask will have been stored in the signal frame, @@ -495,6 +493,14 @@ void do_signal(struct pt_regs *regs) */ if (test_thread_flag(TIF_RESTORE_SIGMASK)) clear_thread_flag(TIF_RESTORE_SIGMASK); + + /* + * If we would have taken a single-step trap + * for a normal instruction, act like we took + * one for the handler setup. + */ + if (current->thread.per_info.single_step) + set_thread_flag(TIF_SINGLE_STEP); } return; } diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 264ea906db4..aa37fa15451 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -42,6 +42,7 @@ #include <asm/tlbflush.h> #include <asm/timer.h> #include <asm/lowcore.h> +#include <asm/sclp.h> #include <asm/cpu.h> /* @@ -53,11 +54,27 @@ EXPORT_SYMBOL(lowcore_ptr); cpumask_t cpu_online_map = CPU_MASK_NONE; EXPORT_SYMBOL(cpu_online_map); -cpumask_t cpu_possible_map = CPU_MASK_NONE; +cpumask_t cpu_possible_map = CPU_MASK_ALL; EXPORT_SYMBOL(cpu_possible_map); static struct task_struct *current_set[NR_CPUS]; +static u8 smp_cpu_type; +static int smp_use_sigp_detection; + +enum s390_cpu_state { + CPU_STATE_STANDBY, + CPU_STATE_CONFIGURED, +}; + +#ifdef CONFIG_HOTPLUG_CPU +static DEFINE_MUTEX(smp_cpu_state_mutex); +#endif +static int smp_cpu_state[NR_CPUS]; + +static DEFINE_PER_CPU(struct cpu, cpu_devices); +DEFINE_PER_CPU(struct s390_idle_data, s390_idle); + static void smp_ext_bitcall(int, ec_bit_sig); /* @@ -193,6 +210,33 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info, } EXPORT_SYMBOL(smp_call_function_single); +/** + * smp_call_function_mask(): Run a function on a set of other CPUs. + * @mask: The set of cpus to run on. Must not include the current cpu. + * @func: The function to run. This must be fast and non-blocking. + * @info: An arbitrary pointer to pass to the function. + * @wait: If true, wait (atomically) until function has completed on other CPUs. + * + * Returns 0 on success, else a negative status code. + * + * If @wait is true, then returns once @func has returned; otherwise + * it returns just before the target cpu calls @func. + * + * You must not call this function with disabled interrupts or from a + * hardware interrupt handler or from a bottom half handler. + */ +int +smp_call_function_mask(cpumask_t mask, + void (*func)(void *), void *info, + int wait) +{ + preempt_disable(); + __smp_call_function_map(func, info, 0, wait, mask); + preempt_enable(); + return 0; +} +EXPORT_SYMBOL(smp_call_function_mask); + void smp_send_stop(void) { int cpu, rc; @@ -217,33 +261,6 @@ void smp_send_stop(void) } /* - * Reboot, halt and power_off routines for SMP. - */ -void machine_restart_smp(char *__unused) -{ - smp_send_stop(); - do_reipl(); -} - -void machine_halt_smp(void) -{ - smp_send_stop(); - if (MACHINE_IS_VM && strlen(vmhalt_cmd) > 0) - __cpcmd(vmhalt_cmd, NULL, 0, NULL); - signal_processor(smp_processor_id(), sigp_stop_and_store_status); - for (;;); -} - -void machine_power_off_smp(void) -{ - smp_send_stop(); - if (MACHINE_IS_VM && strlen(vmpoff_cmd) > 0) - __cpcmd(vmpoff_cmd, NULL, 0, NULL); - signal_processor(smp_processor_id(), sigp_stop_and_store_status); - for (;;); -} - -/* * This is the main routine where commands issued by other * cpus are handled. */ @@ -355,6 +372,13 @@ void smp_ctl_clear_bit(int cr, int bit) } EXPORT_SYMBOL(smp_ctl_clear_bit); +/* + * In early ipl state a temp. logically cpu number is needed, so the sigp + * functions can be used to sense other cpus. Since NR_CPUS is >= 2 on + * CONFIG_SMP and the ipl cpu is logical cpu 0, it must be 1. + */ +#define CPU_INIT_NO 1 + #if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE) /* @@ -375,9 +399,10 @@ static void __init smp_get_save_area(unsigned int cpu, unsigned int phy_cpu) "kernel was compiled with NR_CPUS=%i\n", cpu, NR_CPUS); return; } - zfcpdump_save_areas[cpu] = alloc_bootmem(sizeof(union save_area)); - __cpu_logical_map[1] = (__u16) phy_cpu; - while (signal_processor(1, sigp_stop_and_store_status) == sigp_busy) + zfcpdump_save_areas[cpu] = kmalloc(sizeof(union save_area), GFP_KERNEL); + __cpu_logical_map[CPU_INIT_NO] = (__u16) phy_cpu; + while (signal_processor(CPU_INIT_NO, sigp_stop_and_store_status) == + sigp_busy) cpu_relax(); memcpy(zfcpdump_save_areas[cpu], (void *)(unsigned long) store_prefix() + SAVE_AREA_BASE, @@ -397,32 +422,155 @@ static inline void smp_get_save_area(unsigned int cpu, unsigned int phy_cpu) { } #endif /* CONFIG_ZFCPDUMP || CONFIG_ZFCPDUMP_MODULE */ -/* - * Lets check how many CPUs we have. - */ -static unsigned int __init smp_count_cpus(void) +static int cpu_stopped(int cpu) { - unsigned int cpu, num_cpus; - __u16 boot_cpu_addr; + __u32 status; - /* - * cpu 0 is the boot cpu. See smp_prepare_boot_cpu. - */ + /* Check for stopped state */ + if (signal_processor_ps(&status, 0, cpu, sigp_sense) == + sigp_status_stored) { + if (status & 0x40) + return 1; + } + return 0; +} + +static int cpu_known(int cpu_id) +{ + int cpu; + + for_each_present_cpu(cpu) { + if (__cpu_logical_map[cpu] == cpu_id) + return 1; + } + return 0; +} + +static int smp_rescan_cpus_sigp(cpumask_t avail) +{ + int cpu_id, logical_cpu; + + logical_cpu = first_cpu(avail); + if (logical_cpu == NR_CPUS) + return 0; + for (cpu_id = 0; cpu_id <= 65535; cpu_id++) { + if (cpu_known(cpu_id)) + continue; + __cpu_logical_map[logical_cpu] = cpu_id; + if (!cpu_stopped(logical_cpu)) + continue; + cpu_set(logical_cpu, cpu_present_map); + smp_cpu_state[logical_cpu] = CPU_STATE_CONFIGURED; + logical_cpu = next_cpu(logical_cpu, avail); + if (logical_cpu == NR_CPUS) + break; + } + return 0; +} + +static int smp_rescan_cpus_sclp(cpumask_t avail) +{ + struct sclp_cpu_info *info; + int cpu_id, logical_cpu, cpu; + int rc; + + logical_cpu = first_cpu(avail); + if (logical_cpu == NR_CPUS) + return 0; + info = kmalloc(sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + rc = sclp_get_cpu_info(info); + if (rc) + goto out; + for (cpu = 0; cpu < info->combined; cpu++) { + if (info->has_cpu_type && info->cpu[cpu].type != smp_cpu_type) + continue; + cpu_id = info->cpu[cpu].address; + if (cpu_known(cpu_id)) + continue; + __cpu_logical_map[logical_cpu] = cpu_id; + cpu_set(logical_cpu, cpu_present_map); + if (cpu >= info->configured) + smp_cpu_state[logical_cpu] = CPU_STATE_STANDBY; + else + smp_cpu_state[logical_cpu] = CPU_STATE_CONFIGURED; + logical_cpu = next_cpu(logical_cpu, avail); + if (logical_cpu == NR_CPUS) + break; + } +out: + kfree(info); + return rc; +} + +static int smp_rescan_cpus(void) +{ + cpumask_t avail; + + cpus_xor(avail, cpu_possible_map, cpu_present_map); + if (smp_use_sigp_detection) + return smp_rescan_cpus_sigp(avail); + else + return smp_rescan_cpus_sclp(avail); +} + +static void __init smp_detect_cpus(void) +{ + unsigned int cpu, c_cpus, s_cpus; + struct sclp_cpu_info *info; + u16 boot_cpu_addr, cpu_addr; + + c_cpus = 1; + s_cpus = 0; boot_cpu_addr = S390_lowcore.cpu_data.cpu_addr; - current_thread_info()->cpu = 0; - num_cpus = 1; - for (cpu = 0; cpu <= 65535; cpu++) { - if ((__u16) cpu == boot_cpu_addr) + info = kmalloc(sizeof(*info), GFP_KERNEL); + if (!info) + panic("smp_detect_cpus failed to allocate memory\n"); + /* Use sigp detection algorithm if sclp doesn't work. */ + if (sclp_get_cpu_info(info)) { + smp_use_sigp_detection = 1; + for (cpu = 0; cpu <= 65535; cpu++) { + if (cpu == boot_cpu_addr) + continue; + __cpu_logical_map[CPU_INIT_NO] = cpu; + if (!cpu_stopped(CPU_INIT_NO)) + continue; + smp_get_save_area(c_cpus, cpu); + c_cpus++; + } + goto out; + } + + if (info->has_cpu_type) { + for (cpu = 0; cpu < info->combined; cpu++) { + if (info->cpu[cpu].address == boot_cpu_addr) { + smp_cpu_type = info->cpu[cpu].type; + break; + } + } + } + + for (cpu = 0; cpu < info->combined; cpu++) { + if (info->has_cpu_type && info->cpu[cpu].type != smp_cpu_type) + continue; + cpu_addr = info->cpu[cpu].address; + if (cpu_addr == boot_cpu_addr) continue; - __cpu_logical_map[1] = (__u16) cpu; - if (signal_processor(1, sigp_sense) == sigp_not_operational) + __cpu_logical_map[CPU_INIT_NO] = cpu_addr; + if (!cpu_stopped(CPU_INIT_NO)) { + s_cpus++; continue; - smp_get_save_area(num_cpus, cpu); - num_cpus++; + } + smp_get_save_area(c_cpus, cpu_addr); + c_cpus++; } - printk("Detected %d CPU's\n", (int) num_cpus); - printk("Boot cpu address %2X\n", boot_cpu_addr); - return num_cpus; +out: + kfree(info); + printk(KERN_INFO "CPUs: %d configured, %d standby\n", c_cpus, s_cpus); + get_online_cpus(); + smp_rescan_cpus(); + put_online_cpus(); } /* @@ -453,8 +601,6 @@ int __cpuinit start_secondary(void *cpuvoid) return 0; } -DEFINE_PER_CPU(struct s390_idle_data, s390_idle); - static void __init smp_create_idle(unsigned int cpu) { struct task_struct *p; @@ -470,37 +616,82 @@ static void __init smp_create_idle(unsigned int cpu) spin_lock_init(&(&per_cpu(s390_idle, cpu))->lock); } -static int cpu_stopped(int cpu) +static int __cpuinit smp_alloc_lowcore(int cpu) { - __u32 status; + unsigned long async_stack, panic_stack; + struct _lowcore *lowcore; + int lc_order; + + lc_order = sizeof(long) == 8 ? 1 : 0; + lowcore = (void *) __get_free_pages(GFP_KERNEL | GFP_DMA, lc_order); + if (!lowcore) + return -ENOMEM; + async_stack = __get_free_pages(GFP_KERNEL, ASYNC_ORDER); + if (!async_stack) + goto out_async_stack; + panic_stack = __get_free_page(GFP_KERNEL); + if (!panic_stack) + goto out_panic_stack; + + *lowcore = S390_lowcore; + lowcore->async_stack = async_stack + ASYNC_SIZE; + lowcore->panic_stack = panic_stack + PAGE_SIZE; - /* Check for stopped state */ - if (signal_processor_ps(&status, 0, cpu, sigp_sense) == - sigp_status_stored) { - if (status & 0x40) - return 1; +#ifndef CONFIG_64BIT + if (MACHINE_HAS_IEEE) { + unsigned long save_area; + + save_area = get_zeroed_page(GFP_KERNEL); + if (!save_area) + goto out_save_area; + lowcore->extended_save_area_addr = (u32) save_area; } +#endif + lowcore_ptr[cpu] = lowcore; return 0; + +#ifndef CONFIG_64BIT +out_save_area: + free_page(panic_stack); +#endif +out_panic_stack: + free_pages(async_stack, ASYNC_ORDER); +out_async_stack: + free_pages((unsigned long) lowcore, lc_order); + return -ENOMEM; } -/* Upping and downing of CPUs */ +#ifdef CONFIG_HOTPLUG_CPU +static void smp_free_lowcore(int cpu) +{ + struct _lowcore *lowcore; + int lc_order; + + lc_order = sizeof(long) == 8 ? 1 : 0; + lowcore = lowcore_ptr[cpu]; +#ifndef CONFIG_64BIT + if (MACHINE_HAS_IEEE) + free_page((unsigned long) lowcore->extended_save_area_addr); +#endif + free_page(lowcore->panic_stack - PAGE_SIZE); + free_pages(lowcore->async_stack - ASYNC_SIZE, ASYNC_ORDER); + free_pages((unsigned long) lowcore, lc_order); + lowcore_ptr[cpu] = NULL; +} +#endif /* CONFIG_HOTPLUG_CPU */ -int __cpu_up(unsigned int cpu) +/* Upping and downing of CPUs */ +int __cpuinit __cpu_up(unsigned int cpu) { struct task_struct *idle; struct _lowcore *cpu_lowcore; struct stack_frame *sf; sigp_ccode ccode; - int curr_cpu; - for (curr_cpu = 0; curr_cpu <= 65535; curr_cpu++) { - __cpu_logical_map[cpu] = (__u16) curr_cpu; - if (cpu_stopped(cpu)) - break; - } - - if (!cpu_stopped(cpu)) - return -ENODEV; + if (smp_cpu_state[cpu] != CPU_STATE_CONFIGURED) + return -EIO; + if (smp_alloc_lowcore(cpu)) + return -ENOMEM; ccode = signal_processor_p((__u32)(unsigned long)(lowcore_ptr[cpu]), cpu, sigp_set_prefix); @@ -515,6 +706,7 @@ int __cpu_up(unsigned int cpu) cpu_lowcore = lowcore_ptr[cpu]; cpu_lowcore->kernel_stack = (unsigned long) task_stack_page(idle) + THREAD_SIZE; + cpu_lowcore->thread_info = (unsigned long) task_thread_info(idle); sf = (struct stack_frame *) (cpu_lowcore->kernel_stack - sizeof(struct pt_regs) - sizeof(struct stack_frame)); @@ -528,6 +720,8 @@ int __cpu_up(unsigned int cpu) cpu_lowcore->percpu_offset = __per_cpu_offset[cpu]; cpu_lowcore->current_task = (unsigned long) idle; cpu_lowcore->cpu_data.cpu_nr = cpu; + cpu_lowcore->softirq_pending = 0; + cpu_lowcore->ext_call_fast = 0; eieio(); while (signal_processor(cpu, sigp_restart) == sigp_busy) @@ -538,44 +732,20 @@ int __cpu_up(unsigned int cpu) return 0; } -static unsigned int __initdata additional_cpus; -static unsigned int __initdata possible_cpus; - -void __init smp_setup_cpu_possible_map(void) +static int __init setup_possible_cpus(char *s) { - unsigned int phy_cpus, pos_cpus, cpu; - - phy_cpus = smp_count_cpus(); - pos_cpus = min(phy_cpus + additional_cpus, (unsigned int) NR_CPUS); - - if (possible_cpus) - pos_cpus = min(possible_cpus, (unsigned int) NR_CPUS); + int pcpus, cpu; - for (cpu = 0; cpu < pos_cpus; cpu++) + pcpus = simple_strtoul(s, NULL, 0); + cpu_possible_map = cpumask_of_cpu(0); + for (cpu = 1; cpu < pcpus && cpu < NR_CPUS; cpu++) cpu_set(cpu, cpu_possible_map); - - phy_cpus = min(phy_cpus, pos_cpus); - - for (cpu = 0; cpu < phy_cpus; cpu++) - cpu_set(cpu, cpu_present_map); -} - -#ifdef CONFIG_HOTPLUG_CPU - -static int __init setup_additional_cpus(char *s) -{ - additional_cpus = simple_strtoul(s, NULL, 0); - return 0; -} -early_param("additional_cpus", setup_additional_cpus); - -static int __init setup_possible_cpus(char *s) -{ - possible_cpus = simple_strtoul(s, NULL, 0); return 0; } early_param("possible_cpus", setup_possible_cpus); +#ifdef CONFIG_HOTPLUG_CPU + int __cpu_disable(void) { struct ec_creg_mask_parms cr_parms; @@ -612,7 +782,8 @@ void __cpu_die(unsigned int cpu) /* Wait until target cpu is down */ while (!smp_cpu_not_running(cpu)) cpu_relax(); - printk("Processor %d spun down\n", cpu); + smp_free_lowcore(cpu); + printk(KERN_INFO "Processor %d spun down\n", cpu); } void cpu_die(void) @@ -625,49 +796,19 @@ void cpu_die(void) #endif /* CONFIG_HOTPLUG_CPU */ -/* - * Cycle through the processors and setup structures. - */ - void __init smp_prepare_cpus(unsigned int max_cpus) { - unsigned long stack; unsigned int cpu; - int i; + + smp_detect_cpus(); /* request the 0x1201 emergency signal external interrupt */ if (register_external_interrupt(0x1201, do_ext_call_interrupt) != 0) panic("Couldn't request external interrupt 0x1201"); memset(lowcore_ptr, 0, sizeof(lowcore_ptr)); - /* - * Initialize prefix pages and stacks for all possible cpus - */ print_cpu_info(&S390_lowcore.cpu_data); + smp_alloc_lowcore(smp_processor_id()); - for_each_possible_cpu(i) { - lowcore_ptr[i] = (struct _lowcore *) - __get_free_pages(GFP_KERNEL | GFP_DMA, - sizeof(void*) == 8 ? 1 : 0); - stack = __get_free_pages(GFP_KERNEL, ASYNC_ORDER); - if (!lowcore_ptr[i] || !stack) - panic("smp_boot_cpus failed to allocate memory\n"); - - *(lowcore_ptr[i]) = S390_lowcore; - lowcore_ptr[i]->async_stack = stack + ASYNC_SIZE; - stack = __get_free_pages(GFP_KERNEL, 0); - if (!stack) - panic("smp_boot_cpus failed to allocate memory\n"); - lowcore_ptr[i]->panic_stack = stack + PAGE_SIZE; -#ifndef CONFIG_64BIT - if (MACHINE_HAS_IEEE) { - lowcore_ptr[i]->extended_save_area_addr = - (__u32) __get_free_pages(GFP_KERNEL, 0); - if (!lowcore_ptr[i]->extended_save_area_addr) - panic("smp_boot_cpus failed to " - "allocate memory\n"); - } -#endif - } #ifndef CONFIG_64BIT if (MACHINE_HAS_IEEE) ctl_set_bit(14, 29); /* enable extended save area */ @@ -683,15 +824,17 @@ void __init smp_prepare_boot_cpu(void) { BUG_ON(smp_processor_id() != 0); + current_thread_info()->cpu = 0; + cpu_set(0, cpu_present_map); cpu_set(0, cpu_online_map); S390_lowcore.percpu_offset = __per_cpu_offset[0]; current_set[0] = current; + smp_cpu_state[0] = CPU_STATE_CONFIGURED; spin_lock_init(&(&__get_cpu_var(s390_idle))->lock); } void __init smp_cpus_done(unsigned int max_cpus) { - cpu_present_map = cpu_possible_map; } /* @@ -705,7 +848,79 @@ int setup_profiling_timer(unsigned int multiplier) return 0; } -static DEFINE_PER_CPU(struct cpu, cpu_devices); +#ifdef CONFIG_HOTPLUG_CPU +static ssize_t cpu_configure_show(struct sys_device *dev, char *buf) +{ + ssize_t count; + + mutex_lock(&smp_cpu_state_mutex); + count = sprintf(buf, "%d\n", smp_cpu_state[dev->id]); + mutex_unlock(&smp_cpu_state_mutex); + return count; +} + +static ssize_t cpu_configure_store(struct sys_device *dev, const char *buf, + size_t count) +{ + int cpu = dev->id; + int val, rc; + char delim; + + if (sscanf(buf, "%d %c", &val, &delim) != 1) + return -EINVAL; + if (val != 0 && val != 1) + return -EINVAL; + + mutex_lock(&smp_cpu_state_mutex); + get_online_cpus(); + rc = -EBUSY; + if (cpu_online(cpu)) + goto out; + rc = 0; + switch (val) { + case 0: + if (smp_cpu_state[cpu] == CPU_STATE_CONFIGURED) { + rc = sclp_cpu_deconfigure(__cpu_logical_map[cpu]); + if (!rc) + smp_cpu_state[cpu] = CPU_STATE_STANDBY; + } + break; + case 1: + if (smp_cpu_state[cpu] == CPU_STATE_STANDBY) { + rc = sclp_cpu_configure(__cpu_logical_map[cpu]); + if (!rc) + smp_cpu_state[cpu] = CPU_STATE_CONFIGURED; + } + break; + default: + break; + } +out: + put_online_cpus(); + mutex_unlock(&smp_cpu_state_mutex); + return rc ? rc : count; +} +static SYSDEV_ATTR(configure, 0644, cpu_configure_show, cpu_configure_store); +#endif /* CONFIG_HOTPLUG_CPU */ + +static ssize_t show_cpu_address(struct sys_device *dev, char *buf) +{ + return sprintf(buf, "%d\n", __cpu_logical_map[dev->id]); +} +static SYSDEV_ATTR(address, 0444, show_cpu_address, NULL); + + +static struct attribute *cpu_common_attrs[] = { +#ifdef CONFIG_HOTPLUG_CPU + &attr_configure.attr, +#endif + &attr_address.attr, + NULL, +}; + +static struct attribute_group cpu_common_attr_group = { + .attrs = cpu_common_attrs, +}; static ssize_t show_capability(struct sys_device *dev, char *buf) { @@ -750,15 +965,15 @@ static ssize_t show_idle_time(struct sys_device *dev, char *buf) } static SYSDEV_ATTR(idle_time_us, 0444, show_idle_time, NULL); -static struct attribute *cpu_attrs[] = { +static struct attribute *cpu_online_attrs[] = { &attr_capability.attr, &attr_idle_count.attr, &attr_idle_time_us.attr, NULL, }; -static struct attribute_group cpu_attr_group = { - .attrs = cpu_attrs, +static struct attribute_group cpu_online_attr_group = { + .attrs = cpu_online_attrs, }; static int __cpuinit smp_cpu_notify(struct notifier_block *self, @@ -778,12 +993,12 @@ static int __cpuinit smp_cpu_notify(struct notifier_block *self, idle->idle_time = 0; idle->idle_count = 0; spin_unlock_irq(&idle->lock); - if (sysfs_create_group(&s->kobj, &cpu_attr_group)) + if (sysfs_create_group(&s->kobj, &cpu_online_attr_group)) return NOTIFY_BAD; break; case CPU_DEAD: case CPU_DEAD_FROZEN: - sysfs_remove_group(&s->kobj, &cpu_attr_group); + sysfs_remove_group(&s->kobj, &cpu_online_attr_group); break; } return NOTIFY_OK; @@ -793,6 +1008,62 @@ static struct notifier_block __cpuinitdata smp_cpu_nb = { .notifier_call = smp_cpu_notify, }; +static int smp_add_present_cpu(int cpu) +{ + struct cpu *c = &per_cpu(cpu_devices, cpu); + struct sys_device *s = &c->sysdev; + int rc; + + c->hotpluggable = 1; + rc = register_cpu(c, cpu); + if (rc) + goto out; + rc = sysfs_create_group(&s->kobj, &cpu_common_attr_group); + if (rc) + goto out_cpu; + if (!cpu_online(cpu)) + goto out; + rc = sysfs_create_group(&s->kobj, &cpu_online_attr_group); + if (!rc) + return 0; + sysfs_remove_group(&s->kobj, &cpu_common_attr_group); +out_cpu: +#ifdef CONFIG_HOTPLUG_CPU + unregister_cpu(c); +#endif +out: + return rc; +} + +#ifdef CONFIG_HOTPLUG_CPU +static ssize_t rescan_store(struct sys_device *dev, const char *buf, + size_t count) +{ + cpumask_t newcpus; + int cpu; + int rc; + + mutex_lock(&smp_cpu_state_mutex); + get_online_cpus(); + newcpus = cpu_present_map; + rc = smp_rescan_cpus(); + if (rc) + goto out; + cpus_andnot(newcpus, cpu_present_map, newcpus); + for_each_cpu_mask(cpu, newcpus) { + rc = smp_add_present_cpu(cpu); + if (rc) + cpu_clear(cpu, cpu_present_map); + } + rc = 0; +out: + put_online_cpus(); + mutex_unlock(&smp_cpu_state_mutex); + return rc ? rc : count; +} +static SYSDEV_ATTR(rescan, 0200, NULL, rescan_store); +#endif /* CONFIG_HOTPLUG_CPU */ + static int __init topology_init(void) { int cpu; @@ -800,16 +1071,14 @@ static int __init topology_init(void) register_cpu_notifier(&smp_cpu_nb); - for_each_possible_cpu(cpu) { - struct cpu *c = &per_cpu(cpu_devices, cpu); - struct sys_device *s = &c->sysdev; - - c->hotpluggable = 1; - register_cpu(c, cpu); - if (!cpu_online(cpu)) - continue; - s = &c->sysdev; - rc = sysfs_create_group(&s->kobj, &cpu_attr_group); +#ifdef CONFIG_HOTPLUG_CPU + rc = sysfs_create_file(&cpu_sysdev_class.kset.kobj, + &attr_rescan.attr); + if (rc) + return rc; +#endif + for_each_present_cpu(cpu) { + rc = smp_add_present_cpu(cpu); if (rc) return rc; } diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c index 8ed16a83fba..52b8342c6bf 100644 --- a/arch/s390/kernel/traps.c +++ b/arch/s390/kernel/traps.c @@ -31,6 +31,7 @@ #include <linux/reboot.h> #include <linux/kprobes.h> #include <linux/bug.h> +#include <linux/utsname.h> #include <asm/system.h> #include <asm/uaccess.h> #include <asm/io.h> @@ -168,9 +169,16 @@ void show_stack(struct task_struct *task, unsigned long *sp) */ void dump_stack(void) { + printk("CPU: %d %s %s %.*s\n", + task_thread_info(current)->cpu, print_tainted(), + init_utsname()->release, + (int)strcspn(init_utsname()->version, " "), + init_utsname()->version); + printk("Process %s (pid: %d, task: %p, ksp: %p)\n", + current->comm, current->pid, current, + (void *) current->thread.ksp); show_stack(NULL, NULL); } - EXPORT_SYMBOL(dump_stack); static inline int mask_bits(struct pt_regs *regs, unsigned long bits) @@ -258,8 +266,14 @@ void die(const char * str, struct pt_regs * regs, long err) console_verbose(); spin_lock_irq(&die_lock); bust_spinlocks(1); - printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter); - print_modules(); + printk("%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter); +#ifdef CONFIG_PREEMPT + printk("PREEMPT "); +#endif +#ifdef CONFIG_SMP + printk("SMP"); +#endif + printk("\n"); notify_die(DIE_OOPS, str, regs, err, current->thread.trap_no, SIGSEGV); show_regs(regs); bust_spinlocks(0); diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index 849120e3e28..93615919934 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -17,6 +17,12 @@ ENTRY(_start) jiffies = jiffies_64; #endif +PHDRS { + text PT_LOAD FLAGS(5); /* R_E */ + data PT_LOAD FLAGS(7); /* RWE */ + note PT_NOTE FLAGS(0); /* ___ */ +} + SECTIONS { . = 0x00000000; @@ -33,6 +39,9 @@ SECTIONS _etext = .; /* End of text section */ + NOTES :text :note + BUG_TABLE :text + RODATA #ifdef CONFIG_SHARED_KERNEL @@ -49,9 +58,6 @@ SECTIONS __stop___ex_table = .; } - NOTES - BUG_TABLE - .data : { /* Data */ DATA_DATA CONSTRUCTORS diff --git a/arch/s390/lib/spinlock.c b/arch/s390/lib/spinlock.c index 8d76403fcf8..e41f4008afc 100644 --- a/arch/s390/lib/spinlock.c +++ b/arch/s390/lib/spinlock.c @@ -39,7 +39,7 @@ static inline void _raw_yield_cpu(int cpu) _raw_yield(); } -void _raw_spin_lock_wait(raw_spinlock_t *lp, unsigned int pc) +void _raw_spin_lock_wait(raw_spinlock_t *lp) { int count = spin_retry; unsigned int cpu = ~smp_processor_id(); @@ -53,15 +53,36 @@ void _raw_spin_lock_wait(raw_spinlock_t *lp, unsigned int pc) } if (__raw_spin_is_locked(lp)) continue; - if (_raw_compare_and_swap(&lp->owner_cpu, 0, cpu) == 0) { - lp->owner_pc = pc; + if (_raw_compare_and_swap(&lp->owner_cpu, 0, cpu) == 0) return; - } } } EXPORT_SYMBOL(_raw_spin_lock_wait); -int _raw_spin_trylock_retry(raw_spinlock_t *lp, unsigned int pc) +void _raw_spin_lock_wait_flags(raw_spinlock_t *lp, unsigned long flags) +{ + int count = spin_retry; + unsigned int cpu = ~smp_processor_id(); + + local_irq_restore(flags); + while (1) { + if (count-- <= 0) { + unsigned int owner = lp->owner_cpu; + if (owner != 0) + _raw_yield_cpu(~owner); + count = spin_retry; + } + if (__raw_spin_is_locked(lp)) + continue; + local_irq_disable(); + if (_raw_compare_and_swap(&lp->owner_cpu, 0, cpu) == 0) + return; + local_irq_restore(flags); + } +} +EXPORT_SYMBOL(_raw_spin_lock_wait_flags); + +int _raw_spin_trylock_retry(raw_spinlock_t *lp) { unsigned int cpu = ~smp_processor_id(); int count; @@ -69,10 +90,8 @@ int _raw_spin_trylock_retry(raw_spinlock_t *lp, unsigned int pc) for (count = spin_retry; count > 0; count--) { if (__raw_spin_is_locked(lp)) continue; - if (_raw_compare_and_swap(&lp->owner_cpu, 0, cpu) == 0) { - lp->owner_pc = pc; + if (_raw_compare_and_swap(&lp->owner_cpu, 0, cpu) == 0) return 1; - } } return 0; } diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c index 394980b05e6..880b0ebf894 100644 --- a/arch/s390/mm/extmem.c +++ b/arch/s390/mm/extmem.c @@ -83,7 +83,7 @@ struct dcss_segment { }; static DEFINE_MUTEX(dcss_lock); -static struct list_head dcss_list = LIST_HEAD_INIT(dcss_list); +static LIST_HEAD(dcss_list); static char *segtype_string[] = { "SW", "EW", "SR", "ER", "SN", "EN", "SC", "EW/EN-MIXED" }; diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c index fb9c5a85aa5..79d13a166a3 100644 --- a/arch/s390/mm/vmem.c +++ b/arch/s390/mm/vmem.c @@ -15,10 +15,6 @@ #include <asm/setup.h> #include <asm/tlbflush.h> -unsigned long vmalloc_end; -EXPORT_SYMBOL(vmalloc_end); - -static struct page *vmem_map; static DEFINE_MUTEX(vmem_mutex); struct memory_segment { @@ -188,8 +184,8 @@ static int vmem_add_mem_map(unsigned long start, unsigned long size) pte_t pte; int ret = -ENOMEM; - map_start = vmem_map + PFN_DOWN(start); - map_end = vmem_map + PFN_DOWN(start + size); + map_start = VMEM_MAP + PFN_DOWN(start); + map_end = VMEM_MAP + PFN_DOWN(start + size); start_addr = (unsigned long) map_start & PAGE_MASK; end_addr = PFN_ALIGN((unsigned long) map_end); @@ -240,10 +236,10 @@ static int vmem_add_mem(unsigned long start, unsigned long size) { int ret; - ret = vmem_add_range(start, size); + ret = vmem_add_mem_map(start, size); if (ret) return ret; - return vmem_add_mem_map(start, size); + return vmem_add_range(start, size); } /* @@ -254,7 +250,7 @@ static int insert_memory_segment(struct memory_segment *seg) { struct memory_segment *tmp; - if (PFN_DOWN(seg->start + seg->size) > max_pfn || + if (seg->start + seg->size >= VMALLOC_START || seg->start + seg->size < seg->start) return -ERANGE; @@ -357,17 +353,15 @@ out: /* * map whole physical memory to virtual memory (identity mapping) + * we reserve enough space in the vmalloc area for vmemmap to hotplug + * additional memory segments. */ void __init vmem_map_init(void) { - unsigned long map_size; int i; - map_size = ALIGN(max_low_pfn, MAX_ORDER_NR_PAGES) * sizeof(struct page); - vmalloc_end = PFN_ALIGN(VMALLOC_END_INIT) - PFN_ALIGN(map_size); - vmem_map = (struct page *) vmalloc_end; - NODE_DATA(0)->node_mem_map = vmem_map; - + BUILD_BUG_ON((unsigned long)VMEM_MAP + VMEM_MAP_SIZE > VMEM_MAP_MAX); + NODE_DATA(0)->node_mem_map = VMEM_MAP; for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) vmem_add_mem(memory_chunk[i].addr, memory_chunk[i].size); } @@ -382,7 +376,7 @@ static int __init vmem_convert_memory_chunk(void) int i; mutex_lock(&vmem_mutex); - for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) { + for (i = 0; i < MEMORY_CHUNKS; i++) { if (!memory_chunk[i].size) continue; seg = kzalloc(sizeof(*seg), GFP_KERNEL); |