diff options
Diffstat (limited to 'arch')
128 files changed, 2187 insertions, 1393 deletions
diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c index 134aec1c6d1..b5f83e9f04d 100644 --- a/arch/h8300/kernel/process.c +++ b/arch/h8300/kernel/process.c @@ -54,7 +54,7 @@ asmlinkage void ret_from_fork(void); void default_idle(void) { while(1) { - if (need_resched()) { + if (!need_resched()) { local_irq_enable(); __asm__("sleep"); local_irq_disable(); diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index e382f32d435..dfd904f6883 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -1163,7 +1163,7 @@ config PCI_DIRECT config PCI_MMCONFIG bool - depends on PCI && (PCI_GOMMCONFIG || (PCI_GOANY && ACPI)) + depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY) select ACPI_BOOT default y diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c index fa34a06c0d7..73aeaf5a9d4 100644 --- a/arch/i386/kernel/cpu/amd.c +++ b/arch/i386/kernel/cpu/amd.c @@ -195,7 +195,7 @@ static void __init init_amd(struct cpuinfo_x86 *c) c->x86_num_cores = 1; } -#ifdef CONFIG_X86_SMP +#ifdef CONFIG_X86_HT /* * On a AMD dual core setup the lower bits of the APIC id * distingush the cores. Assumes number of cores is a power @@ -203,8 +203,11 @@ static void __init init_amd(struct cpuinfo_x86 *c) */ if (c->x86_num_cores > 1) { int cpu = smp_processor_id(); - /* Fix up the APIC ID following AMD specifications. */ - cpu_core_id[cpu] >>= hweight32(c->x86_num_cores - 1); + unsigned bits = 0; + while ((1 << bits) < c->x86_num_cores) + bits++; + cpu_core_id[cpu] = phys_proc_id[cpu] & ((1<<bits)-1); + phys_proc_id[cpu] >>= bits; printk(KERN_INFO "CPU %d(%d) -> Core %d\n", cpu, c->x86_num_cores, cpu_core_id[cpu]); } diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 11e6e6f23fa..d199e525680 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -244,11 +244,8 @@ static void __init early_cpu_detect(void) early_intel_workaround(c); -#ifdef CONFIG_SMP #ifdef CONFIG_X86_HT - phys_proc_id[smp_processor_id()] = -#endif - cpu_core_id[smp_processor_id()] = (cpuid_ebx(1) >> 24) & 0xff; + phys_proc_id[smp_processor_id()] = (cpuid_ebx(1) >> 24) & 0xff; #endif } diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig index f25ffd74235..0f1eb507233 100644 --- a/arch/i386/kernel/cpu/cpufreq/Kconfig +++ b/arch/i386/kernel/cpu/cpufreq/Kconfig @@ -23,7 +23,7 @@ config X86_ACPI_CPUFREQ If in doubt, say N. config ELAN_CPUFREQ - tristate "AMD Elan" + tristate "AMD Elan SC400 and SC410" select CPU_FREQ_TABLE depends on X86_ELAN ---help--- @@ -38,6 +38,18 @@ config ELAN_CPUFREQ If in doubt, say N. +config SC520_CPUFREQ + tristate "AMD Elan SC520" + select CPU_FREQ_TABLE + depends on X86_ELAN + ---help--- + This adds the CPUFreq driver for AMD Elan SC520 processor. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + + config X86_POWERNOW_K6 tristate "AMD Mobile K6-2/K6-3 PowerNow!" select CPU_FREQ_TABLE diff --git a/arch/i386/kernel/cpu/cpufreq/Makefile b/arch/i386/kernel/cpu/cpufreq/Makefile index a922e97aeed..2e894f1c891 100644 --- a/arch/i386/kernel/cpu/cpufreq/Makefile +++ b/arch/i386/kernel/cpu/cpufreq/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o obj-$(CONFIG_X86_LONGHAUL) += longhaul.o obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o +obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o obj-$(CONFIG_X86_LONGRUN) += longrun.o obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index ab0f9f5aac1..04e3563da4f 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -29,6 +29,7 @@ #include <linux/cpufreq.h> #include <linux/slab.h> #include <linux/string.h> +#include <linux/pci.h> #include <asm/msr.h> #include <asm/timex.h> @@ -119,7 +120,13 @@ static int longhaul_get_cpu_mult(void) static void do_powersaver(union msr_longhaul *longhaul, unsigned int clock_ratio_index) { + struct pci_dev *dev; + unsigned long flags; + unsigned int tmp_mask; int version; + int i; + u16 pci_cmd; + u16 cmd_state[64]; switch (cpu_model) { case CPU_EZRA_T: @@ -137,17 +144,58 @@ static void do_powersaver(union msr_longhaul *longhaul, longhaul->bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4; longhaul->bits.EnableSoftBusRatio = 1; longhaul->bits.RevisionKey = 0; - local_irq_disable(); - wrmsrl(MSR_VIA_LONGHAUL, longhaul->val); + + preempt_disable(); + local_irq_save(flags); + + /* + * get current pci bus master state for all devices + * and clear bus master bit + */ + dev = NULL; + i = 0; + do { + dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev); + if (dev != NULL) { + pci_read_config_word(dev, PCI_COMMAND, &pci_cmd); + cmd_state[i++] = pci_cmd; + pci_cmd &= ~PCI_COMMAND_MASTER; + pci_write_config_word(dev, PCI_COMMAND, pci_cmd); + } + } while (dev != NULL); + + tmp_mask=inb(0x21); /* works on C3. save mask. */ + outb(0xFE,0x21); /* TMR0 only */ + outb(0xFF,0x80); /* delay */ + local_irq_enable(); + + __hlt(); + wrmsrl(MSR_VIA_LONGHAUL, longhaul->val); __hlt(); + local_irq_disable(); + + outb(tmp_mask,0x21); /* restore mask */ + + /* restore pci bus master state for all devices */ + dev = NULL; + i = 0; + do { + dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev); + if (dev != NULL) { + pci_cmd = cmd_state[i++]; + pci_write_config_byte(dev, PCI_COMMAND, pci_cmd); + } + } while (dev != NULL); + local_irq_restore(flags); + preempt_enable(); + + /* disable bus ratio bit */ rdmsrl(MSR_VIA_LONGHAUL, longhaul->val); longhaul->bits.EnableSoftBusRatio = 0; longhaul->bits.RevisionKey = version; - local_irq_disable(); wrmsrl(MSR_VIA_LONGHAUL, longhaul->val); - local_irq_enable(); } /** @@ -578,7 +626,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) longhaul_setup_voltagescaling(); policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cpuinfo.transition_latency = 200000; /* nsec */ policy->cur = calc_speed(longhaul_get_cpu_mult()); ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table); diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c index 913f652623d..5c530064eb7 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c @@ -23,6 +23,7 @@ #include <linux/dmi.h> #include <asm/msr.h> +#include <asm/timer.h> #include <asm/timex.h> #include <asm/io.h> #include <asm/system.h> @@ -586,13 +587,17 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy) rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val); - /* A K7 with powernow technology is set to max frequency by BIOS */ - fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.MFID]; + /* recalibrate cpu_khz */ + result = recalibrate_cpu_khz(); + if (result) + return result; + + fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID]; if (!fsb) { printk(KERN_WARNING PFX "can not determine bus frequency\n"); return -EINVAL; } - dprintk("FSB: %3d.%03d MHz\n", fsb/1000, fsb%1000); + dprintk("FSB: %3dMHz\n", fsb/1000); if (dmi_check_system(powernow_dmi_table) || acpi_force) { printk (KERN_INFO PFX "PSB/PST known to be broken. Trying ACPI instead\n"); diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index a65ff7e32e5..10cc096c0ad 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -4,7 +4,7 @@ * GNU general public license version 2. See "COPYING" or * http://www.gnu.org/licenses/gpl.html * - * Support : paul.devriendt@amd.com + * Support : mark.langsdorf@amd.com * * Based on the powernow-k7.c module written by Dave Jones. * (C) 2003 Dave Jones <davej@codemonkey.org.uk> on behalf of SuSE Labs @@ -15,12 +15,13 @@ * * Valuable input gratefully received from Dave Jones, Pavel Machek, * Dominik Brodowski, and others. + * Originally developed by Paul Devriendt. * Processor information obtained from Chapter 9 (Power and Thermal Management) * of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD * Opteron Processors" available for download from www.amd.com * * Tables for specific CPUs can be infrerred from - * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf + * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf */ #include <linux/kernel.h> @@ -30,6 +31,7 @@ #include <linux/cpufreq.h> #include <linux/slab.h> #include <linux/string.h> +#include <linux/cpumask.h> #include <asm/msr.h> #include <asm/io.h> @@ -42,7 +44,7 @@ #define PFX "powernow-k8: " #define BFX PFX "BIOS error: " -#define VERSION "version 1.00.09e" +#define VERSION "version 1.40.2" #include "powernow-k8.h" /* serialize freq changes */ @@ -50,6 +52,10 @@ static DECLARE_MUTEX(fidvid_sem); static struct powernow_k8_data *powernow_data[NR_CPUS]; +#ifndef CONFIG_SMP +static cpumask_t cpu_core_map[1]; +#endif + /* Return a frequency in MHz, given an input fid */ static u32 find_freq_from_fid(u32 fid) { @@ -274,11 +280,18 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid { u32 rvosteps = data->rvo; u32 savefid = data->currfid; + u32 maxvid, lo; dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n", smp_processor_id(), data->currfid, data->currvid, reqvid, data->rvo); + rdmsr(MSR_FIDVID_STATUS, lo, maxvid); + maxvid = 0x1f & (maxvid >> 16); + dprintk("ph1 maxvid=0x%x\n", maxvid); + if (reqvid < maxvid) /* lower numbers are higher voltages */ + reqvid = maxvid; + while (data->currvid > reqvid) { dprintk("ph1: curr 0x%x, req vid 0x%x\n", data->currvid, reqvid); @@ -286,8 +299,8 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid return 1; } - while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) { - if (data->currvid == 0) { + while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) { + if (data->currvid == maxvid) { rvosteps = 0; } else { dprintk("ph1: changing vid for rvo, req 0x%x\n", @@ -671,7 +684,7 @@ static int find_psb_table(struct powernow_k8_data *data) * BIOS and Kernel Developer's Guide, which is available on * www.amd.com */ - printk(KERN_ERR PFX "BIOS error - no PSB\n"); + printk(KERN_INFO PFX "BIOS error - no PSB or ACPI _PSS objects\n"); return -ENODEV; } @@ -695,7 +708,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) struct cpufreq_frequency_table *powernow_table; if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) { - dprintk("register performance failed\n"); + dprintk("register performance failed: bad ACPI data\n"); return -EIO; } @@ -746,22 +759,23 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) continue; } - if (fid < HI_FID_TABLE_BOTTOM) { - if (cntlofreq) { - /* if both entries are the same, ignore this - * one... - */ - if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) || - (powernow_table[i].index != powernow_table[cntlofreq].index)) { - printk(KERN_ERR PFX "Too many lo freq table entries\n"); - goto err_out_mem; - } - - dprintk("double low frequency table entry, ignoring it.\n"); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; - continue; - } else - cntlofreq = i; + /* verify only 1 entry from the lo frequency table */ + if (fid < HI_FID_TABLE_BOTTOM) { + if (cntlofreq) { + /* if both entries are the same, ignore this + * one... + */ + if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) || + (powernow_table[i].index != powernow_table[cntlofreq].index)) { + printk(KERN_ERR PFX "Too many lo freq table entries\n"); + goto err_out_mem; + } + + dprintk("double low frequency table entry, ignoring it.\n"); + powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + continue; + } else + cntlofreq = i; } if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) { @@ -816,7 +830,7 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde { u32 fid; u32 vid; - int res; + int res, i; struct cpufreq_freqs freqs; dprintk("cpu %d transition to index %u\n", smp_processor_id(), index); @@ -841,7 +855,8 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde } if ((fid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) { - printk("ignoring illegal change in lo freq table-%x to 0x%x\n", + printk(KERN_ERR PFX + "ignoring illegal change in lo freq table-%x to 0x%x\n", data->currfid, fid); return 1; } @@ -850,18 +865,20 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde smp_processor_id(), fid, vid); freqs.cpu = data->cpu; - freqs.old = find_khz_freq_from_fid(data->currfid); freqs.new = find_khz_freq_from_fid(fid); - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + for_each_cpu_mask(i, cpu_core_map[data->cpu]) { + freqs.cpu = i; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + } - down(&fidvid_sem); res = transition_fid_vid(data, fid, vid); - up(&fidvid_sem); freqs.new = find_khz_freq_from_fid(data->currfid); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - + for_each_cpu_mask(i, cpu_core_map[data->cpu]) { + freqs.cpu = i; + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + } return res; } @@ -874,6 +891,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi u32 checkvid = data->currvid; unsigned int newstate; int ret = -EIO; + int i; /* only run on specific CPU from here on */ oldmask = current->cpus_allowed; @@ -902,22 +920,41 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi data->currfid, data->currvid); if ((checkvid != data->currvid) || (checkfid != data->currfid)) { - printk(KERN_ERR PFX - "error - out of sync, fid 0x%x 0x%x, vid 0x%x 0x%x\n", - checkfid, data->currfid, checkvid, data->currvid); + printk(KERN_INFO PFX + "error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n", + checkfid, data->currfid, checkvid, data->currvid); } if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate)) goto err_out; + down(&fidvid_sem); + + for_each_cpu_mask(i, cpu_core_map[pol->cpu]) { + /* make sure the sibling is initialized */ + if (!powernow_data[i]) { + ret = 0; + up(&fidvid_sem); + goto err_out; + } + } + powernow_k8_acpi_pst_values(data, newstate); if (transition_frequency(data, newstate)) { printk(KERN_ERR PFX "transition frequency failed\n"); ret = 1; + up(&fidvid_sem); goto err_out; } + /* Update all the fid/vids of our siblings */ + for_each_cpu_mask(i, cpu_core_map[pol->cpu]) { + powernow_data[i]->currvid = data->currvid; + powernow_data[i]->currfid = data->currfid; + } + up(&fidvid_sem); + pol->cur = find_khz_freq_from_fid(data->currfid); ret = 0; @@ -962,7 +999,7 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol) */ if ((num_online_cpus() != 1) || (num_possible_cpus() != 1)) { - printk(KERN_INFO PFX "MP systems not supported by PSB BIOS structure\n"); + printk(KERN_ERR PFX "MP systems not supported by PSB BIOS structure\n"); kfree(data); return -ENODEV; } @@ -1003,6 +1040,7 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol) schedule(); pol->governor = CPUFREQ_DEFAULT_GOVERNOR; + pol->cpus = cpu_core_map[pol->cpu]; /* Take a crude guess here. * That guess was in microseconds, so multiply with 1000 */ @@ -1069,7 +1107,7 @@ static unsigned int powernowk8_get (unsigned int cpu) return 0; } preempt_disable(); - + if (query_current_values_with_pending_wait(data)) goto out; @@ -1127,9 +1165,10 @@ static void __exit powernowk8_exit(void) cpufreq_unregister_driver(&cpufreq_amd64_driver); } -MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com>"); +MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com."); MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver."); MODULE_LICENSE("GPL"); late_initcall(powernowk8_init); module_exit(powernowk8_exit); + diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h index 63ebc8470f5..9ed5bf221cb 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h @@ -174,3 +174,18 @@ static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvi static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid); static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index); + +#ifndef for_each_cpu_mask +#define for_each_cpu_mask(i,mask) for (i=0;i<1;i++) +#endif + +#ifdef CONFIG_SMP +static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[]) +{ +} +#else +static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[]) +{ + cpu_set(0, cpu_sharedcore_mask[0]); +} +#endif diff --git a/arch/i386/kernel/cpu/cpufreq/sc520_freq.c b/arch/i386/kernel/cpu/cpufreq/sc520_freq.c new file mode 100644 index 00000000000..ef457d50f4a --- /dev/null +++ b/arch/i386/kernel/cpu/cpufreq/sc520_freq.c @@ -0,0 +1,186 @@ +/* + * sc520_freq.c: cpufreq driver for the AMD Elan sc520 + * + * Copyright (C) 2005 Sean Young <sean@mess.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Based on elanfreq.c + * + * 2005-03-30: - initial revision + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> + +#include <linux/delay.h> +#include <linux/cpufreq.h> + +#include <asm/msr.h> +#include <asm/timex.h> +#include <asm/io.h> + +#define MMCR_BASE 0xfffef000 /* The default base address */ +#define OFFS_CPUCTL 0x2 /* CPU Control Register */ + +static __u8 __iomem *cpuctl; + +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "sc520_freq", msg) + +static struct cpufreq_frequency_table sc520_freq_table[] = { + {0x01, 100000}, + {0x02, 133000}, + {0, CPUFREQ_TABLE_END}, +}; + +static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) +{ + u8 clockspeed_reg = *cpuctl; + + switch (clockspeed_reg & 0x03) { + default: + printk(KERN_ERR "sc520_freq: error: cpuctl register has unexpected value %02x\n", clockspeed_reg); + case 0x01: + return 100000; + case 0x02: + return 133000; + } +} + +static void sc520_freq_set_cpu_state (unsigned int state) +{ + + struct cpufreq_freqs freqs; + u8 clockspeed_reg; + + freqs.old = sc520_freq_get_cpu_frequency(0); + freqs.new = sc520_freq_table[state].frequency; + freqs.cpu = 0; /* AMD Elan is UP */ + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + dprintk("attempting to set frequency to %i kHz\n", + sc520_freq_table[state].frequency); + + local_irq_disable(); + + clockspeed_reg = *cpuctl & ~0x03; + *cpuctl = clockspeed_reg | sc520_freq_table[state].index; + + local_irq_enable(); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); +}; + +static int sc520_freq_verify (struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]); +} + +static int sc520_freq_target (struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int newstate = 0; + + if (cpufreq_frequency_table_target(policy, sc520_freq_table, target_freq, relation, &newstate)) + return -EINVAL; + + sc520_freq_set_cpu_state(newstate); + + return 0; +} + + +/* + * Module init and exit code + */ + +static int sc520_freq_cpu_init(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *c = cpu_data; + int result; + + /* capability check */ + if (c->x86_vendor != X86_VENDOR_AMD || + c->x86 != 4 || c->x86_model != 9) + return -ENODEV; + + /* cpuinfo and default policy values */ + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = 1000000; /* 1ms */ + policy->cur = sc520_freq_get_cpu_frequency(0); + + result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table); + if (result) + return (result); + + cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu); + + return 0; +} + + +static int sc520_freq_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + + +static struct freq_attr* sc520_freq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + + +static struct cpufreq_driver sc520_freq_driver = { + .get = sc520_freq_get_cpu_frequency, + .verify = sc520_freq_verify, + .target = sc520_freq_target, + .init = sc520_freq_cpu_init, + .exit = sc520_freq_cpu_exit, + .name = "sc520_freq", + .owner = THIS_MODULE, + .attr = sc520_freq_attr, +}; + + +static int __init sc520_freq_init(void) +{ + struct cpuinfo_x86 *c = cpu_data; + + /* Test if we have the right hardware */ + if(c->x86_vendor != X86_VENDOR_AMD || + c->x86 != 4 || c->x86_model != 9) { + dprintk("no Elan SC520 processor found!\n"); + return -ENODEV; + } + cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1); + if(!cpuctl) { + printk(KERN_ERR "sc520_freq: error: failed to remap memory\n"); + return -ENOMEM; + } + + return cpufreq_register_driver(&sc520_freq_driver); +} + + +static void __exit sc520_freq_exit(void) +{ + cpufreq_unregister_driver(&sc520_freq_driver); + iounmap(cpuctl); +} + + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Sean Young <sean@mess.org>"); +MODULE_DESCRIPTION("cpufreq driver for AMD's Elan sc520 CPU"); + +module_init(sc520_freq_init); +module_exit(sc520_freq_exit); + diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index 07d5612dc00..7dcbf70fc16 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -54,6 +54,8 @@ enum { CPU_DOTHAN_A1, CPU_DOTHAN_A2, CPU_DOTHAN_B0, + CPU_MP4HT_D0, + CPU_MP4HT_E0, }; static const struct cpu_id cpu_ids[] = { @@ -61,6 +63,8 @@ static const struct cpu_id cpu_ids[] = { [CPU_DOTHAN_A1] = { 6, 13, 1 }, [CPU_DOTHAN_A2] = { 6, 13, 2 }, [CPU_DOTHAN_B0] = { 6, 13, 6 }, + [CPU_MP4HT_D0] = {15, 3, 4 }, + [CPU_MP4HT_E0] = {15, 4, 1 }, }; #define N_IDS (sizeof(cpu_ids)/sizeof(cpu_ids[0])) @@ -226,6 +230,8 @@ static struct cpu_model models[] = { &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL }, { &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL }, { &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL }, + { &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL }, + { &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL }, { NULL, } }; diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c index 8ba430a9c3a..d368b3f5fce 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c @@ -336,7 +336,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, if (!prev_speed) return -EIO; - dprintk("previous seped is %u\n", prev_speed); + dprintk("previous speed is %u\n", prev_speed); local_irq_save(flags); @@ -348,7 +348,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, goto out; } - dprintk("low seped is %u\n", *low_speed); + dprintk("low speed is %u\n", *low_speed); /* switch to high state */ set_state(SPEEDSTEP_HIGH); @@ -358,7 +358,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, goto out; } - dprintk("high seped is %u\n", *high_speed); + dprintk("high speed is %u\n", *high_speed); if (*low_speed == *high_speed) { ret = -ENODEV; diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c index 79440b3f087..b25fb6b635a 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c @@ -357,6 +357,9 @@ static int __init speedstep_init(void) case SPEEDSTEP_PROCESSOR_PIII_C: case SPEEDSTEP_PROCESSOR_PIII_C_EARLY: break; + case SPEEDSTEP_PROCESSOR_P4M: + printk(KERN_INFO "speedstep-smi: you're trying to use this cpufreq driver on a Pentium 4-based CPU. Most likely it will not work.\n"); + break; default: speedstep_processor = 0; } diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c index aeb5b4ef8c8..a710dc4eb20 100644 --- a/arch/i386/kernel/cpu/intel_cacheinfo.c +++ b/arch/i386/kernel/cpu/intel_cacheinfo.c @@ -118,7 +118,7 @@ struct _cpuid4_info { }; #define MAX_CACHE_LEAVES 4 -static unsigned short __devinitdata num_cache_leaves; +static unsigned short num_cache_leaves; static int __devinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf) { diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 945ec73163c..2bfbddebdbf 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -1502,11 +1502,13 @@ void __init setup_arch(char **cmdline_p) if (efi_enabled) efi_map_memmap(); +#ifdef CONFIG_ACPI_BOOT /* * Parse the ACPI tables for possible boot-time SMP configuration. */ acpi_boot_table_init(); acpi_boot_init(); +#endif #ifdef CONFIG_X86_LOCAL_APIC if (smp_found_config) diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index cbea7ac582e..bc1bb6919e6 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -888,6 +888,7 @@ void *xquad_portio; cpumask_t cpu_sibling_map[NR_CPUS] __cacheline_aligned; cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned; +EXPORT_SYMBOL(cpu_core_map); static void __init smp_boot_cpus(unsigned int max_cpus) { @@ -1073,8 +1074,10 @@ static void __init smp_boot_cpus(unsigned int max_cpus) cpu_set(cpu, cpu_sibling_map[cpu]); } - if (siblings != smp_num_siblings) + if (siblings != smp_num_siblings) { printk(KERN_WARNING "WARNING: %d siblings found for CPU%d, should be %d\n", siblings, cpu, smp_num_siblings); + smp_num_siblings = siblings; + } if (c->x86_num_cores > 1) { for (i = 0; i < NR_CPUS; i++) { diff --git a/arch/i386/kernel/timers/common.c b/arch/i386/kernel/timers/common.c index f7f90005e22..8e201219f52 100644 --- a/arch/i386/kernel/timers/common.c +++ b/arch/i386/kernel/timers/common.c @@ -6,6 +6,7 @@ #include <linux/timex.h> #include <linux/errno.h> #include <linux/jiffies.h> +#include <linux/module.h> #include <asm/io.h> #include <asm/timer.h> @@ -24,7 +25,7 @@ #define CALIBRATE_TIME (5 * 1000020/HZ) -unsigned long __init calibrate_tsc(void) +unsigned long calibrate_tsc(void) { mach_prepare_counter(); @@ -139,7 +140,7 @@ bad_calibration: #endif /* calculate cpu_khz */ -void __init init_cpu_khz(void) +void init_cpu_khz(void) { if (cpu_has_tsc) { unsigned long tsc_quotient = calibrate_tsc(); @@ -158,3 +159,4 @@ void __init init_cpu_khz(void) } } } + diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c index 7926d967be0..180444d8782 100644 --- a/arch/i386/kernel/timers/timer_tsc.c +++ b/arch/i386/kernel/timers/timer_tsc.c @@ -320,6 +320,26 @@ core_initcall(cpufreq_tsc); static inline void cpufreq_delayed_get(void) { return; } #endif +int recalibrate_cpu_khz(void) +{ +#ifndef CONFIG_SMP + unsigned long cpu_khz_old = cpu_khz; + + if (cpu_has_tsc) { + init_cpu_khz(); + cpu_data[0].loops_per_jiffy = + cpufreq_scale(cpu_data[0].loops_per_jiffy, + cpu_khz_old, + cpu_khz); + return 0; + } else + return -ENODEV; +#else + return -ENODEV; +#endif +} +EXPORT_SYMBOL(recalibrate_cpu_khz); + static void mark_offset_tsc(void) { unsigned long lost,delay; diff --git a/arch/i386/mach-voyager/voyager_smp.c b/arch/i386/mach-voyager/voyager_smp.c index 903d739ca74..a6e0ddd65bd 100644 --- a/arch/i386/mach-voyager/voyager_smp.c +++ b/arch/i386/mach-voyager/voyager_smp.c @@ -97,7 +97,6 @@ static void ack_vic_irq(unsigned int irq); static void vic_enable_cpi(void); static void do_boot_cpu(__u8 cpuid); static void do_quad_bootstrap(void); -static inline void wrapper_smp_local_timer_interrupt(struct pt_regs *); int hard_smp_processor_id(void); @@ -126,6 +125,14 @@ send_QIC_CPI(__u32 cpuset, __u8 cpi) } static inline void +wrapper_smp_local_timer_interrupt(struct pt_regs *regs) +{ + irq_enter(); + smp_local_timer_interrupt(regs); + irq_exit(); +} + +static inline void send_one_CPI(__u8 cpu, __u8 cpi) { if(voyager_quad_processors & (1<<cpu)) @@ -1249,14 +1256,6 @@ smp_vic_timer_interrupt(struct pt_regs *regs) smp_local_timer_interrupt(regs); } -static inline void -wrapper_smp_local_timer_interrupt(struct pt_regs *regs) -{ - irq_enter(); - smp_local_timer_interrupt(regs); - irq_exit(); -} - /* local (per CPU) timer interrupt. It does both profiling and * process statistics/rescheduling. * diff --git a/arch/i386/mm/ioremap.c b/arch/i386/mm/ioremap.c index db06f739991..ab542792b27 100644 --- a/arch/i386/mm/ioremap.c +++ b/arch/i386/mm/ioremap.c @@ -238,19 +238,21 @@ void iounmap(volatile void __iomem *addr) addr < phys_to_virt(ISA_END_ADDRESS)) return; - p = remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr)); + write_lock(&vmlist_lock); + p = __remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr)); if (!p) { - printk("__iounmap: bad address %p\n", addr); - return; + printk("iounmap: bad address %p\n", addr); + goto out_unlock; } if ((p->flags >> 20) && p->phys_addr < virt_to_phys(high_memory) - 1) { - /* p->size includes the guard page, but cpa doesn't like that */ change_page_attr(virt_to_page(__va(p->phys_addr)), p->size >> PAGE_SHIFT, PAGE_KERNEL); global_flush_tlb(); } +out_unlock: + write_unlock(&vmlist_lock); kfree(p); } diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c index d6598da4b67..da21b1d07c1 100644 --- a/arch/i386/pci/irq.c +++ b/arch/i386/pci/irq.c @@ -1029,7 +1029,6 @@ void pcibios_penalize_isa_irq(int irq) static int pirq_enable_irq(struct pci_dev *dev) { u8 pin; - extern int via_interrupt_line_quirk; struct pci_dev *temp_dev; pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); @@ -1084,10 +1083,6 @@ static int pirq_enable_irq(struct pci_dev *dev) printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.%s\n", 'A' + pin, pci_name(dev), msg); } - /* VIA bridges use interrupt line for apic/pci steering across - the V-Link */ - else if (via_interrupt_line_quirk) - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq & 15); return 0; } diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c index 247a21c64ae..c1e20d65dd6 100644 --- a/arch/ia64/ia32/sys_ia32.c +++ b/arch/ia64/ia32/sys_ia32.c @@ -2427,7 +2427,7 @@ sys32_epoll_wait(int epfd, struct epoll_event32 __user * events, int maxevents, { struct epoll_event *events64 = NULL; mm_segment_t old_fs = get_fs(); - int error, numevents, size; + int numevents, size; int evt_idx; int do_free_pages = 0; diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 81c45d44739..d99316c9be2 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1182,7 +1182,7 @@ ENTRY(notify_resume_user) ;; (pNonSys) mov out2=0 // out2==0 => not a syscall .fframe 16 - .spillpsp ar.unat, 16 // (note that offset is relative to psp+0x10!) + .spillsp ar.unat, 16 st8 [sp]=r9,-16 // allocate space for ar.unat and save it st8 [out1]=loc1,-8 // save ar.pfs, out1=&sigscratch .body @@ -1208,7 +1208,7 @@ GLOBAL_ENTRY(sys_rt_sigsuspend) adds out2=8,sp // out2=&sigscratch->ar_pfs ;; .fframe 16 - .spillpsp ar.unat, 16 // (note that offset is relative to psp+0x10!) + .spillsp ar.unat, 16 st8 [sp]=r9,-16 // allocate space for ar.unat and save it st8 [out2]=loc1,-8 // save ar.pfs, out2=&sigscratch .body diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 4d6c7b8f667..736e328b5e6 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -1103,8 +1103,6 @@ ia64_mca_cpe_int_caller(int cpe_irq, void *arg, struct pt_regs *ptregs) return IRQ_HANDLED; } -#endif /* CONFIG_ACPI */ - /* * ia64_mca_cpe_poll * @@ -1122,6 +1120,8 @@ ia64_mca_cpe_poll (unsigned long dummy) platform_send_ipi(first_cpu(cpu_online_map), IA64_CPEP_VECTOR, IA64_IPI_DM_INT, 0); } +#endif /* CONFIG_ACPI */ + /* * C portion of the OS INIT handler * @@ -1390,8 +1390,7 @@ ia64_mca_init(void) register_percpu_irq(IA64_MCA_WAKEUP_VECTOR, &mca_wkup_irqaction); #ifdef CONFIG_ACPI - /* Setup the CPEI/P vector and handler */ - cpe_vector = acpi_request_vector(ACPI_INTERRUPT_CPEI); + /* Setup the CPEI/P handler */ register_percpu_irq(IA64_CPEP_VECTOR, &mca_cpep_irqaction); #endif @@ -1436,6 +1435,7 @@ ia64_mca_late_init(void) #ifdef CONFIG_ACPI /* Setup the CPEI/P vector and handler */ + cpe_vector = acpi_request_vector(ACPI_INTERRUPT_CPEI); init_timer(&cpe_poll_timer); cpe_poll_timer.function = ia64_mca_cpe_poll; diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h index 1dbc7b2497c..f6d8a010d99 100644 --- a/arch/ia64/kernel/minstate.h +++ b/arch/ia64/kernel/minstate.h @@ -41,7 +41,7 @@ (pKStk) addl r3=THIS_CPU(ia64_mca_data),r3;; \ (pKStk) ld8 r3 = [r3];; \ (pKStk) addl r3=IA64_MCA_CPU_INIT_STACK_OFFSET,r3;; \ -(pKStk) addl sp=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r3; \ +(pKStk) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r3; \ (pUStk) mov ar.rsc=0; /* set enforced lazy mode, pl 0, little-endian, loadrs=0 */ \ (pUStk) addl r22=IA64_RBS_OFFSET,r1; /* compute base of register backing store */ \ ;; \ @@ -50,7 +50,6 @@ (pUStk) mov r23=ar.bspstore; /* save ar.bspstore */ \ (pUStk) dep r22=-1,r22,61,3; /* compute kernel virtual addr of RBS */ \ ;; \ -(pKStk) addl r1=-IA64_PT_REGS_SIZE,r1; /* if in kernel mode, use sp (r12) */ \ (pUStk) mov ar.bspstore=r22; /* switch to kernel RBS */ \ ;; \ (pUStk) mov r18=ar.bsp; \ diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 71c101601e3..6407bff6bfd 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -11,7 +11,7 @@ * Version Perfmon-2.x is a rewrite of perfmon-1.x * by Stephane Eranian, Hewlett Packard Co. * - * Copyright (C) 1999-2003, 2005 Hewlett Packard Co + * Copyright (C) 1999-2005 Hewlett Packard Co * Stephane Eranian <eranian@hpl.hp.com> * David Mosberger-Tang <davidm@hpl.hp.com> * @@ -497,6 +497,9 @@ typedef struct { static pfm_stats_t pfm_stats[NR_CPUS]; static pfm_session_t pfm_sessions; /* global sessions information */ +static spinlock_t pfm_alt_install_check = SPIN_LOCK_UNLOCKED; +static pfm_intr_handler_desc_t *pfm_alt_intr_handler; + static struct proc_dir_entry *perfmon_dir; static pfm_uuid_t pfm_null_uuid = {0,}; @@ -606,6 +609,7 @@ DEFINE_PER_CPU(unsigned long, pfm_syst_info); DEFINE_PER_CPU(struct task_struct *, pmu_owner); DEFINE_PER_CPU(pfm_context_t *, pmu_ctx); DEFINE_PER_CPU(unsigned long, pmu_activation_number); +EXPORT_PER_CPU_SYMBOL_GPL(pfm_syst_info); /* forward declaration */ @@ -1325,7 +1329,7 @@ pfm_reserve_session(struct task_struct *task, int is_syswide, unsigned int cpu) error_conflict: DPRINT(("system wide not possible, conflicting session [%d] on CPU%d\n", pfm_sessions.pfs_sys_session[cpu]->pid, - smp_processor_id())); + cpu)); abort: UNLOCK_PFS(flags); @@ -5555,26 +5559,32 @@ pfm_interrupt_handler(int irq, void *arg, struct pt_regs *regs) int ret; this_cpu = get_cpu(); - min = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min; - max = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max; + if (likely(!pfm_alt_intr_handler)) { + min = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min; + max = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max; - start_cycles = ia64_get_itc(); + start_cycles = ia64_get_itc(); - ret = pfm_do_interrupt_handler(irq, arg, regs); + ret = pfm_do_interrupt_handler(irq, arg, regs); - total_cycles = ia64_get_itc(); + total_cycles = ia64_get_itc(); - /* - * don't measure spurious interrupts - */ - if (likely(ret == 0)) { - total_cycles -= start_cycles; + /* + * don't measure spurious interrupts + */ + if (likely(ret == 0)) { + total_cycles -= start_cycles; - if (total_cycles < min) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min = total_cycles; - if (total_cycles > max) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max = total_cycles; + if (total_cycles < min) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min = total_cycles; + if (total_cycles > max) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max = total_cycles; - pfm_stats[this_cpu].pfm_ovfl_intr_cycles += total_cycles; + pfm_stats[this_cpu].pfm_ovfl_intr_cycles += total_cycles; + } + } + else { + (*pfm_alt_intr_handler->handler)(irq, arg, regs); } + put_cpu_no_resched(); return IRQ_HANDLED; } @@ -6425,6 +6435,141 @@ static struct irqaction perfmon_irqaction = { .name = "perfmon" }; +static void +pfm_alt_save_pmu_state(void *data) +{ + struct pt_regs *regs; + + regs = ia64_task_regs(current); + + DPRINT(("called\n")); + + /* + * should not be necessary but + * let's take not risk + */ + pfm_clear_psr_up(); + pfm_clear_psr_pp(); + ia64_psr(regs)->pp = 0; + + /* + * This call is required + * May cause a spurious interrupt on some processors + */ + pfm_freeze_pmu(); + + ia64_srlz_d(); +} + +void +pfm_alt_restore_pmu_state(void *data) +{ + struct pt_regs *regs; + + regs = ia64_task_regs(current); + + DPRINT(("called\n")); + + /* + * put PMU back in state expected + * by perfmon + */ + pfm_clear_psr_up(); + pfm_clear_psr_pp(); + ia64_psr(regs)->pp = 0; + + /* + * perfmon runs with PMU unfrozen at all times + */ + pfm_unfreeze_pmu(); + + ia64_srlz_d(); +} + +int +pfm_install_alt_pmu_interrupt(pfm_intr_handler_desc_t *hdl) +{ + int ret, i; + int reserve_cpu; + + /* some sanity checks */ + if (hdl == NULL || hdl->handler == NULL) return -EINVAL; + + /* do the easy test first */ + if (pfm_alt_intr_handler) return -EBUSY; + + /* one at a time in the install or remove, just fail the others */ + if (!spin_trylock(&pfm_alt_install_check)) { + return -EBUSY; + } + + /* reserve our session */ + for_each_online_cpu(reserve_cpu) { + ret = pfm_reserve_session(NULL, 1, reserve_cpu); + if (ret) goto cleanup_reserve; + } + + /* save the current system wide pmu states */ + ret = on_each_cpu(pfm_alt_save_pmu_state, NULL, 0, 1); + if (ret) { + DPRINT(("on_each_cpu() failed: %d\n", ret)); + goto cleanup_reserve; + } + + /* officially change to the alternate interrupt handler */ + pfm_alt_intr_handler = hdl; + + spin_unlock(&pfm_alt_install_check); + + return 0; + +cleanup_reserve: + for_each_online_cpu(i) { + /* don't unreserve more than we reserved */ + if (i >= reserve_cpu) break; + + pfm_unreserve_session(NULL, 1, i); + } + + spin_unlock(&pfm_alt_install_check); + + return ret; +} +EXPORT_SYMBOL_GPL(pfm_install_alt_pmu_interrupt); + +int +pfm_remove_alt_pmu_interrupt(pfm_intr_handler_desc_t *hdl) +{ + int i; + int ret; + + if (hdl == NULL) return -EINVAL; + + /* cannot remove someone else's handler! */ + if (pfm_alt_intr_handler != hdl) return -EINVAL; + + /* one at a time in the install or remove, just fail the others */ + if (!spin_trylock(&pfm_alt_install_check)) { + return -EBUSY; + } + + pfm_alt_intr_handler = NULL; + + ret = on_each_cpu(pfm_alt_restore_pmu_state, NULL, 0, 1); + if (ret) { + DPRINT(("on_each_cpu() failed: %d\n", ret)); + } + + for_each_online_cpu(i) { + pfm_unreserve_session(NULL, 1, i); + } + + spin_unlock(&pfm_alt_install_check); + + return 0; +} +EXPORT_SYMBOL_GPL(pfm_remove_alt_pmu_interrupt); + /* * perfmon initialization routine, called from the initcall() table */ diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index 907464ee727..08c8a5eb25a 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -692,16 +692,30 @@ convert_to_non_syscall (struct task_struct *child, struct pt_regs *pt, unsigned long cfm) { struct unw_frame_info info, prev_info; - unsigned long ip, pr; + unsigned long ip, sp, pr; unw_init_from_blocked_task(&info, child); while (1) { prev_info = info; if (unw_unwind(&info) < 0) return; - if (unw_get_rp(&info, &ip) < 0) + + unw_get_sp(&info, &sp); + if ((long)((unsigned long)child + IA64_STK_OFFSET - sp) + < IA64_PT_REGS_SIZE) { + dprintk("ptrace.%s: ran off the top of the kernel " + "stack\n", __FUNCTION__); + return; + } + if (unw_get_pr (&prev_info, &pr) < 0) { + unw_get_rp(&prev_info, &ip); + dprintk("ptrace.%s: failed to read " + "predicate register (ip=0x%lx)\n", + __FUNCTION__, ip); return; - if (ip < FIXADDR_USER_END) + } + if (unw_is_intr_frame(&info) + && (pr & (1UL << PRED_USER_STACK))) break; } diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index 0d5ee57c986..3865f088ffa 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -624,7 +624,7 @@ static struct { __u16 thread_id; __u16 proc_fixed_addr; __u8 valid; -}mt_info[NR_CPUS] __devinit; +} mt_info[NR_CPUS] __devinitdata; #ifdef CONFIG_HOTPLUG_CPU static inline void diff --git a/arch/ia64/kernel/sys_ia64.c b/arch/ia64/kernel/sys_ia64.c index a8cf6d8a509..770fab37928 100644 --- a/arch/ia64/kernel/sys_ia64.c +++ b/arch/ia64/kernel/sys_ia64.c @@ -182,13 +182,6 @@ do_mmap2 (unsigned long addr, unsigned long len, int prot, int flags, int fd, un } } - /* - * A zero mmap always succeeds in Linux, independent of whether or not the - * remaining arguments are valid. - */ - if (len == 0) - goto out; - /* Careful about overflows.. */ len = PAGE_ALIGN(len); if (!len || len > TASK_SIZE) { diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index 4fb44984afe..e64cb8175f7 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -271,6 +271,8 @@ void __init sn_setup(char **cmdline_p) int major = sn_sal_rev_major(), minor = sn_sal_rev_minor(); extern void sn_cpu_init(void); + ia64_sn_plat_set_error_handling_features(); + /* * If the generic code has enabled vga console support - lets * get rid of it again. This is a kludge for the fact that ACPI diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index cd752a3cf3b..54ce6da2264 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -1160,12 +1160,12 @@ config PCI_QSPAN config PCI_8260 bool - depends on PCI && 8260 && !8272 + depends on PCI && 8260 default y config 8260_PCI9 bool " Enable workaround for MPC826x erratum PCI 9" - depends on PCI_8260 + depends on PCI_8260 && !ADS8272 default y choice diff --git a/arch/ppc/boot/images/Makefile b/arch/ppc/boot/images/Makefile index f850fb0fb51..c9ac5f5fa9e 100644 --- a/arch/ppc/boot/images/Makefile +++ b/arch/ppc/boot/images/Makefile @@ -22,7 +22,8 @@ targets += uImage $(obj)/uImage: $(obj)/vmlinux.gz $(Q)rm -f $@ $(call if_changed,uimage) - @echo ' Image: $@' $(if $(wildcard $@),'is ready','not made') + @echo -n ' Image: $@ ' + @if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi # Files generated that shall be removed upon make clean clean-files := sImage vmapus vmlinux* miboot* zImage* uImage diff --git a/arch/ppc/configs/mpc8555_cds_defconfig b/arch/ppc/configs/mpc8555_cds_defconfig index 728bd9e1a8f..15abebf46b9 100644 --- a/arch/ppc/configs/mpc8555_cds_defconfig +++ b/arch/ppc/configs/mpc8555_cds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc1 -# Thu Jan 20 01:25:35 2005 +# Linux kernel version: 2.6.12-rc4 +# Tue May 17 11:56:01 2005 # CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y @@ -11,6 +11,7 @@ CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # # Code maturity level options @@ -18,6 +19,7 @@ CONFIG_GENERIC_NVRAM=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -29,12 +31,14 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +48,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -62,10 +67,12 @@ CONFIG_CC_ALIGN_JUMPS=0 CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_MATH_EMULATION=y # CONFIG_CPU_FREQ is not set CONFIG_PPC_GEN550=y +# CONFIG_PM is not set CONFIG_85xx=y CONFIG_PPC_INDIRECT_PCI_BE=y @@ -76,6 +83,7 @@ CONFIG_PPC_INDIRECT_PCI_BE=y CONFIG_MPC8555_CDS=y # CONFIG_MPC8560_ADS is not set # CONFIG_SBC8560 is not set +# CONFIG_STX_GP3 is not set CONFIG_MPC8555=y CONFIG_85xx_PCI2=y @@ -90,6 +98,7 @@ CONFIG_CPM2=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y # # Bus options @@ -105,10 +114,6 @@ CONFIG_PCI_NAMES=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # Advanced setup # # CONFIG_ADVANCED_OPTIONS is not set @@ -180,7 +185,59 @@ CONFIG_IOSCHED_CFQ=y # # ATA/ATAPI/MFM/RLL support # -# CONFIG_IDE is not set +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +CONFIG_BLK_DEV_VIA82CXXX=y +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -220,7 +277,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -370,14 +426,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -387,6 +435,13 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # # CONFIG_VT is not set @@ -406,6 +461,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_CPM is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -434,6 +490,11 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # CONFIG_I2C=y @@ -456,11 +517,11 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set @@ -483,7 +544,9 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -494,9 +557,11 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -506,10 +571,12 @@ CONFIG_I2C_MPC=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -538,7 +605,6 @@ CONFIG_I2C_MPC=y # Graphics support # # CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -548,13 +614,9 @@ CONFIG_I2C_MPC=y # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -585,6 +647,10 @@ CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set + +# +# XFS support +# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -646,7 +712,6 @@ CONFIG_NFS_FS=y # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -698,7 +763,9 @@ CONFIG_CRC32=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_KGDB_CONSOLE is not set # CONFIG_SERIAL_TEXT_DEBUG is not set diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S index 9b6a8e51365..6c7ae605246 100644 --- a/arch/ppc/kernel/head_44x.S +++ b/arch/ppc/kernel/head_44x.S @@ -330,8 +330,9 @@ interrupt_base: /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - andis. r11, r10, 0x8000 - beq 3f + lis r11, TASK_SIZE@h + cmplw r10, r11 + blt+ 3f lis r11, swapper_pg_dir@h ori r11, r11, swapper_pg_dir@l @@ -464,8 +465,9 @@ interrupt_base: /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - andis. r11, r10, 0x8000 - beq 3f + lis r11, TASK_SIZE@h + cmplw r10, r11 + blt+ 3f lis r11, swapper_pg_dir@h ori r11, r11, swapper_pg_dir@l @@ -533,8 +535,9 @@ interrupt_base: /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - andis. r11, r10, 0x8000 - beq 3f + lis r11, TASK_SIZE@h + cmplw r10, r11 + blt+ 3f lis r11, swapper_pg_dir@h ori r11, r11, swapper_pg_dir@l diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S index f22ddce3613..ce36e88ba62 100644 --- a/arch/ppc/kernel/head_fsl_booke.S +++ b/arch/ppc/kernel/head_fsl_booke.S @@ -232,7 +232,8 @@ skpinv: addi r6,r6,1 /* Increment */ tlbwe /* 7. Jump to KERNELBASE mapping */ - li r7,0 + lis r7,MSR_KERNEL@h + ori r7,r7,MSR_KERNEL@l bl 1f /* Find our address */ 1: mflr r9 rlwimi r6,r9,0,20,31 @@ -293,6 +294,18 @@ skpinv: addi r6,r6,1 /* Increment */ mtspr SPRN_HID0, r2 #endif +#if !defined(CONFIG_BDI_SWITCH) + /* + * The Abatron BDI JTAG debugger does not tolerate others + * mucking with the debug registers. + */ + lis r2,DBCR0_IDM@h + mtspr SPRN_DBCR0,r2 + /* clear any residual debug events */ + li r2,-1 + mtspr SPRN_DBSR,r2 +#endif + /* * This is where the main kernel code starts. */ diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 309797d7f96..5c20266e3b1 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -499,7 +499,7 @@ static int __init set_preferred_console(void) { struct device_node *prom_stdout; char *name; - int offset; + int offset = 0; if (of_stdout_device == NULL) return -ENODEV; diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index f8e7e324a17..c65731e8bc6 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -408,12 +408,7 @@ static int emulate_string_inst(struct pt_regs *regs, u32 instword) /* Early out if we are an invalid form of lswx */ if ((instword & INST_STRING_MASK) == INST_LSWX) - if ((rA >= rT) || (NB_RB >= rT) || (rT == rA) || (rT == NB_RB)) - return -EINVAL; - - /* Early out if we are an invalid form of lswi */ - if ((instword & INST_STRING_MASK) == INST_LSWI) - if ((rA >= rT) || (rT == rA)) + if ((rT == rA) || (rT == NB_RB)) return -EINVAL; EA = (rA == 0) ? 0 : regs->gpr[rA]; diff --git a/arch/ppc/lib/string.S b/arch/ppc/lib/string.S index 8d08a2eb225..36c9b97fd92 100644 --- a/arch/ppc/lib/string.S +++ b/arch/ppc/lib/string.S @@ -446,6 +446,7 @@ _GLOBAL(__copy_tofrom_user) #ifdef CONFIG_8xx /* Don't use prefetch on 8xx */ mtctr r0 + li r0,0 53: COPY_16_BYTES_WITHEX(0) bdnz 53b @@ -564,7 +565,9 @@ _GLOBAL(__copy_tofrom_user) /* or write fault in cacheline loop */ 105: li r9,1 92: li r3,LG_CACHELINE_BYTES - b 99f + mfctr r8 + add r0,r0,r8 + b 106f /* read fault in final word loop */ 108: li r9,0 b 93f @@ -585,7 +588,7 @@ _GLOBAL(__copy_tofrom_user) * r5 + (ctr << r3), and r9 is 0 for read or 1 for write. */ 99: mfctr r0 - slw r3,r0,r3 +106: slw r3,r0,r3 add. r3,r3,r5 beq 120f /* shouldn't happen */ cmpwi 0,r9,0 diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c index be02a7fec2b..363c157e361 100644 --- a/arch/ppc/mm/init.c +++ b/arch/ppc/mm/init.c @@ -179,6 +179,7 @@ void free_initmem(void) if (!have_of) FREESEC(openfirmware); printk("\n"); + ppc_md.progress = NULL; #undef FREESEC } diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c index b3b0f51979d..e6348b5a1dd 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.c +++ b/arch/ppc/platforms/83xx/mpc834x_sys.c @@ -127,7 +127,6 @@ mpc834x_sys_map_io(void) { /* we steal the lowest ioremap addr for virt space */ io_block_mapping(VIRT_IMMRBAR, immrbar, 1024*1024, _PAGE_IO); - io_block_mapping(BCSR_VIRT_ADDR, BCSR_PHYS_ADDR, BCSR_SIZE, _PAGE_IO); } int diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.h b/arch/ppc/platforms/83xx/mpc834x_sys.h index f4d055ae19c..a2f6e49d715 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.h +++ b/arch/ppc/platforms/83xx/mpc834x_sys.h @@ -26,9 +26,14 @@ #define VIRT_IMMRBAR ((uint)0xfe000000) #define BCSR_PHYS_ADDR ((uint)0xf8000000) -#define BCSR_VIRT_ADDR ((uint)0xfe100000) #define BCSR_SIZE ((uint)(32 * 1024)) +#define BCSR_MISC_REG2_OFF 0x07 +#define BCSR_MISC_REG2_PORESET 0x01 + +#define BCSR_MISC_REG3_OFF 0x08 +#define BCSR_MISC_REG3_CNFLOCK 0x80 + #ifdef CONFIG_PCI /* PCI interrupt controller */ #define PIRQA MPC83xx_IRQ_IRQ4 diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c index 4d857d6d633..583838ab02d 100644 --- a/arch/ppc/platforms/85xx/mpc8540_ads.c +++ b/arch/ppc/platforms/85xx/mpc8540_ads.c @@ -210,6 +210,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) ppc_md.progress = gen550_progress; #endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ +#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) + ppc_md.early_serial_map = mpc85xx_early_serial_map; +#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ if (ppc_md.progress) ppc_md.progress("mpc8540ads_init(): exit", 0); diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c index 6c020d67ad7..e7cfa498568 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c @@ -44,6 +44,7 @@ #include <asm/machdep.h> #include <asm/prom.h> #include <asm/open_pic.h> +#include <asm/i8259.h> #include <asm/bootinfo.h> #include <asm/pci-bridge.h> #include <asm/mpc85xx.h> @@ -181,6 +182,7 @@ void __init mpc85xx_cds_init_IRQ(void) { bd_t *binfo = (bd_t *) __res; + int i; /* Determine the Physical Address of the OpenPIC regs */ phys_addr_t OpenPIC_PAddr = binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET; @@ -198,6 +200,15 @@ mpc85xx_cds_init_IRQ(void) */ openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET); +#ifdef CONFIG_PCI + openpic_hookup_cascade(PIRQ0A, "82c59 cascade", i8259_irq); + + for (i = 0; i < NUM_8259_INTERRUPTS; i++) + irq_desc[i].handler = &i8259_pic; + + i8259_init(0); +#endif + #ifdef CONFIG_CPM2 /* Setup CPM2 PIC */ cpm2_init_IRQ(); @@ -231,7 +242,7 @@ mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) * interrupt on slot */ { { 0, 1, 2, 3 }, /* 16 - PMC */ - { 3, 0, 0, 0 }, /* 17 P2P (Tsi320) */ + { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */ { 0, 1, 2, 3 }, /* 18 - Slot 1 */ { 1, 2, 3, 0 }, /* 19 - Slot 2 */ { 2, 3, 0, 1 }, /* 20 - Slot 3 */ @@ -280,13 +291,135 @@ mpc85xx_exclude_device(u_char bus, u_char devfn) return PCIBIOS_DEVICE_NOT_FOUND; #endif /* We explicitly do not go past the Tundra 320 Bridge */ - if (bus == 1) + if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL)) return PCIBIOS_DEVICE_NOT_FOUND; if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL)) return PCIBIOS_DEVICE_NOT_FOUND; else return PCIBIOS_SUCCESSFUL; } + +void __init +mpc85xx_cds_enable_via(struct pci_controller *hose) +{ + u32 pci_class; + u16 vid, did; + + early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class); + if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI) + return; + + /* Configure P2P so that we can reach bus 1 */ + early_write_config_byte(hose, 0, 0x88, PCI_PRIMARY_BUS, 0); + early_write_config_byte(hose, 0, 0x88, PCI_SECONDARY_BUS, 1); + early_write_config_byte(hose, 0, 0x88, PCI_SUBORDINATE_BUS, 0xff); + + early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid); + early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did); + + if ((vid != PCI_VENDOR_ID_VIA) || + (did != PCI_DEVICE_ID_VIA_82C686)) + return; + + /* Enable USB and IDE functions */ + early_write_config_byte(hose, 1, 0x10, 0x48, 0x08); +} + +void __init +mpc85xx_cds_fixup_via(struct pci_controller *hose) +{ + u32 pci_class; + u16 vid, did; + + early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class); + if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI) + return; + + /* + * Force the backplane P2P bridge to have a window + * open from 0x00000000-0x00001fff in PCI I/O space. + * This allows legacy I/O (i8259, etc) on the VIA + * southbridge to be accessed. + */ + early_write_config_byte(hose, 0, 0x88, PCI_IO_BASE, 0x00); + early_write_config_word(hose, 0, 0x88, PCI_IO_BASE_UPPER16, 0x0000); + early_write_config_byte(hose, 0, 0x88, PCI_IO_LIMIT, 0x10); + early_write_config_word(hose, 0, 0x88, PCI_IO_LIMIT_UPPER16, 0x0000); + + early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid); + early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did); + if ((vid != PCI_VENDOR_ID_VIA) || + (did != PCI_DEVICE_ID_VIA_82C686)) + return; + + /* + * Since the P2P window was forced to cover the fixed + * legacy I/O addresses, it is necessary to manually + * place the base addresses for the IDE and USB functions + * within this window. + */ + /* Function 1, IDE */ + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_0, 0x1ff8); + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_1, 0x1ff4); + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_2, 0x1fe8); + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_3, 0x1fe4); + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_4, 0x1fd0); + + /* Function 2, USB ports 0-1 */ + early_write_config_dword(hose, 1, 0x12, PCI_BASE_ADDRESS_4, 0x1fa0); + + /* Function 3, USB ports 2-3 */ + early_write_config_dword(hose, 1, 0x13, PCI_BASE_ADDRESS_4, 0x1f80); + + /* Function 5, Power Management */ + early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_0, 0x1e00); + early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_1, 0x1dfc); + early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_2, 0x1df8); + + /* Function 6, AC97 Interface */ + early_write_config_dword(hose, 1, 0x16, PCI_BASE_ADDRESS_0, 0x1c00); +} + +void __init +mpc85xx_cds_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + u_char c; + + if ((dev = pci_find_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_1, NULL))) { + /* + * U-Boot does not set the enable bits + * for the IDE device. Force them on here. + */ + pci_read_config_byte(dev, 0x40, &c); + c |= 0x03; /* IDE: Chip Enable Bits */ + pci_write_config_byte(dev, 0x40, c); + + /* + * Since only primary interface works, force the + * IDE function to standard primary IDE interrupt + * w/ 8259 offset + */ + dev->irq = 14; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + } + + /* + * Force legacy USB interrupt routing + */ + if ((dev = pci_find_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_2, NULL))) { + dev->irq = 10; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10); + } + + if ((dev = pci_find_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_2, dev))) { + dev->irq = 11; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11); + } +} #endif /* CONFIG_PCI */ TODC_ALLOC(); @@ -328,6 +461,9 @@ mpc85xx_cds_setup_arch(void) loops_per_jiffy = freq / HZ; #ifdef CONFIG_PCI + /* VIA IDE configuration */ + ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup; + /* setup PCI host bridges */ mpc85xx_setup_hose(); #endif @@ -459,6 +595,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) ppc_md.progress = gen550_progress; #endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ +#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) + ppc_md.early_serial_map = mpc85xx_early_serial_map; +#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ if (ppc_md.progress) ppc_md.progress("mpc85xx_cds_init(): exit", 0); diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h index 7627d77504b..12b292c6ae3 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h @@ -77,4 +77,7 @@ #define MPC85XX_PCI2_IO_SIZE 0x01000000 +#define NR_8259_INTS 16 +#define CPM_IRQ_OFFSET NR_8259_INTS + #endif /* __MACH_MPC85XX_CDS_H__ */ diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c index 9ab05e590c3..7b9e1543e17 100644 --- a/arch/ppc/platforms/85xx/sbc8560.c +++ b/arch/ppc/platforms/85xx/sbc8560.c @@ -221,6 +221,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) ppc_md.progress = gen550_progress; #endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ +#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) + ppc_md.early_serial_map = sbc8560_early_serial_map; +#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ if (ppc_md.progress) ppc_md.progress("sbc8560_init(): exit", 0); diff --git a/arch/ppc/platforms/pmac_cpufreq.c b/arch/ppc/platforms/pmac_cpufreq.c index f7fb2786cd5..937f46df711 100644 --- a/arch/ppc/platforms/pmac_cpufreq.c +++ b/arch/ppc/platforms/pmac_cpufreq.c @@ -85,14 +85,11 @@ static int no_schedule; static int has_cpu_l2lve; -#define PMAC_CPU_LOW_SPEED 1 -#define PMAC_CPU_HIGH_SPEED 0 - /* There are only two frequency states for each processor. Values * are in kHz for the time being. */ -#define CPUFREQ_HIGH PMAC_CPU_HIGH_SPEED -#define CPUFREQ_LOW PMAC_CPU_LOW_SPEED +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 static struct cpufreq_frequency_table pmac_cpu_freqs[] = { {CPUFREQ_HIGH, 0}, @@ -100,6 +97,11 @@ static struct cpufreq_frequency_table pmac_cpu_freqs[] = { {0, CPUFREQ_TABLE_END}, }; +static struct freq_attr* pmac_cpu_freqs_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + static inline void local_delay(unsigned long ms) { if (no_schedule) @@ -269,6 +271,8 @@ static int __pmac pmu_set_cpu_speed(int low_speed) #ifdef DEBUG_FREQ printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); #endif + pmu_suspend(); + /* Disable all interrupt sources on openpic */ pic_prio = openpic_get_priority(); openpic_set_priority(0xf); @@ -343,6 +347,8 @@ static int __pmac pmu_set_cpu_speed(int low_speed) debug_calc_bogomips(); #endif + pmu_resume(); + preempt_enable(); return 0; @@ -355,7 +361,7 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify) static unsigned long prev_l3cr; freqs.old = cur_freq; - freqs.new = (speed_mode == PMAC_CPU_HIGH_SPEED) ? hi_freq : low_freq; + freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; freqs.cpu = smp_processor_id(); if (freqs.old == freqs.new) @@ -363,7 +369,7 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify) if (notify) cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - if (speed_mode == PMAC_CPU_LOW_SPEED && + if (speed_mode == CPUFREQ_LOW && cpu_has_feature(CPU_FTR_L3CR)) { l3cr = _get_L3CR(); if (l3cr & L3CR_L3E) { @@ -371,8 +377,8 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify) _set_L3CR(0); } } - set_speed_proc(speed_mode == PMAC_CPU_LOW_SPEED); - if (speed_mode == PMAC_CPU_HIGH_SPEED && + set_speed_proc(speed_mode == CPUFREQ_LOW); + if (speed_mode == CPUFREQ_HIGH && cpu_has_feature(CPU_FTR_L3CR)) { l3cr = _get_L3CR(); if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) @@ -380,7 +386,7 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify) } if (notify) cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - cur_freq = (speed_mode == PMAC_CPU_HIGH_SPEED) ? hi_freq : low_freq; + cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; return 0; } @@ -423,7 +429,8 @@ static int __pmac pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; policy->cur = cur_freq; - return cpufreq_frequency_table_cpuinfo(policy, &pmac_cpu_freqs[0]); + cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu); + return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs); } static u32 __pmac read_gpio(struct device_node *np) @@ -457,7 +464,7 @@ static int __pmac pmac_cpufreq_suspend(struct cpufreq_policy *policy, u32 state) no_schedule = 1; sleep_freq = cur_freq; if (cur_freq == low_freq) - do_set_cpu_speed(PMAC_CPU_HIGH_SPEED, 0); + do_set_cpu_speed(CPUFREQ_HIGH, 0); return 0; } @@ -473,8 +480,8 @@ static int __pmac pmac_cpufreq_resume(struct cpufreq_policy *policy) * is that we force a switch to whatever it was, which is * probably high speed due to our suspend() routine */ - do_set_cpu_speed(sleep_freq == low_freq ? PMAC_CPU_LOW_SPEED - : PMAC_CPU_HIGH_SPEED, 0); + do_set_cpu_speed(sleep_freq == low_freq ? + CPUFREQ_LOW : CPUFREQ_HIGH, 0); no_schedule = 0; return 0; @@ -488,6 +495,7 @@ static struct cpufreq_driver pmac_cpufreq_driver = { .suspend = pmac_cpufreq_suspend, .resume = pmac_cpufreq_resume, .flags = CPUFREQ_PM_NO_WARN, + .attr = pmac_cpu_freqs_attr, .name = "powermac", .owner = THIS_MODULE, }; diff --git a/arch/ppc/platforms/pq2ads.h b/arch/ppc/platforms/pq2ads.h index cf5e5dd06d6..067d9a5aebc 100644 --- a/arch/ppc/platforms/pq2ads.h +++ b/arch/ppc/platforms/pq2ads.h @@ -49,10 +49,10 @@ /* PCI interrupt controller */ #define PCI_INT_STAT_REG 0xF8200000 #define PCI_INT_MASK_REG 0xF8200004 -#define PIRQA (NR_SIU_INTS + 0) -#define PIRQB (NR_SIU_INTS + 1) -#define PIRQC (NR_SIU_INTS + 2) -#define PIRQD (NR_SIU_INTS + 3) +#define PIRQA (NR_CPM_INTS + 0) +#define PIRQB (NR_CPM_INTS + 1) +#define PIRQC (NR_CPM_INTS + 2) +#define PIRQD (NR_CPM_INTS + 3) /* * PCI memory map definitions for MPC8266ADS-PCI. @@ -68,28 +68,23 @@ * 0x00000000-0x1FFFFFFF 0x00000000-0x1FFFFFFF MPC8266 local memory */ -/* window for a PCI master to access MPC8266 memory */ -#define PCI_SLV_MEM_LOCAL 0x00000000 /* Local base */ -#define PCI_SLV_MEM_BUS 0x00000000 /* PCI base */ +/* All the other PCI memory map definitions reside at syslib/m82xx_pci.h + Here we should redefine what is unique for this board */ +#define M82xx_PCI_SLAVE_MEM_LOCAL 0x00000000 /* Local base */ +#define M82xx_PCI_SLAVE_MEM_BUS 0x00000000 /* PCI base */ +#define M82xx_PCI_SLAVE_MEM_SIZE 0x10000000 /* 256 Mb */ -/* window for the processor to access PCI memory with prefetching */ -#define PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */ -#define PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */ -#define PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */ +#define M82xx_PCI_SLAVE_SEC_WND_SIZE ~(0x40000000 - 1U) /* 2 x 512Mb */ +#define M82xx_PCI_SLAVE_SEC_WND_BASE 0x80000000 /* PCI Memory base */ -/* window for the processor to access PCI memory without prefetching */ -#define PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */ -#define PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */ -#define PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */ +#if defined(CONFIG_ADS8272) +#define PCI_INT_TO_SIU SIU_INT_IRQ2 +#elif defined(CONFIG_PQ2FADS) +#define PCI_INT_TO_SIU SIU_INT_IRQ6 +#else +#warning PCI Bridge will be without interrupts support +#endif -/* window for the processor to access PCI I/O */ -#define PCI_MSTR_IO_LOCAL 0xF4000000 /* Local base */ -#define PCI_MSTR_IO_BUS 0x00000000 /* PCI base */ -#define PCI_MSTR_IO_SIZE 0x04000000 /* 64MB */ - -#define _IO_BASE PCI_MSTR_IO_LOCAL -#define _ISA_MEM_BASE PCI_MSTR_MEMIO_LOCAL -#define PCI_DRAM_OFFSET PCI_SLV_MEM_BUS #endif /* CONFIG_PCI */ #endif /* __MACH_ADS8260_DEFS */ diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index dd418ea3426..96acf85800d 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -81,7 +81,7 @@ obj-$(CONFIG_SBC82xx) += todc_time.o obj-$(CONFIG_SPRUCE) += cpc700_pic.o indirect_pci.o pci_auto.o \ todc_time.o obj-$(CONFIG_8260) += m8260_setup.o -obj-$(CONFIG_PCI_8260) += m8260_pci.o indirect_pci.o +obj-$(CONFIG_PCI_8260) += m82xx_pci.o indirect_pci.o pci_auto.o obj-$(CONFIG_8260_PCI9) += m8260_pci_erratum9.o obj-$(CONFIG_CPM2) += cpm2_common.o cpm2_pic.o ifeq ($(CONFIG_PPC_GEN550),y) @@ -97,7 +97,7 @@ obj-$(CONFIG_MPC10X_OPENPIC) += open_pic.o obj-$(CONFIG_40x) += dcr.o obj-$(CONFIG_BOOKE) += dcr.o obj-$(CONFIG_85xx) += open_pic.o ppc85xx_common.o ppc85xx_setup.o \ - ppc_sys.o mpc85xx_sys.o \ + ppc_sys.o i8259.o mpc85xx_sys.o \ mpc85xx_devices.o ifeq ($(CONFIG_85xx),y) obj-$(CONFIG_PCI) += indirect_pci.o pci_auto.o diff --git a/arch/ppc/syslib/ipic.c b/arch/ppc/syslib/ipic.c index acb2cde3171..580ed658e87 100644 --- a/arch/ppc/syslib/ipic.c +++ b/arch/ppc/syslib/ipic.c @@ -479,7 +479,7 @@ void __init ipic_init(phys_addr_t phys_addr, temp = 0; for (i = 0 ; i < senses_count ; i++) { if ((senses[i] & IRQ_SENSE_MASK) == IRQ_SENSE_EDGE) { - temp |= 1 << (16 - i); + temp |= 1 << (15 - i); if (i != 0) irq_desc[i + irq_offset + MPC83xx_IRQ_EXT1 - 1].status = 0; else diff --git a/arch/ppc/syslib/m8260_pci.c b/arch/ppc/syslib/m8260_pci.c deleted file mode 100644 index 057cc3f8ff3..00000000000 --- a/arch/ppc/syslib/m8260_pci.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004 Red Hat, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/delay.h> - -#include <asm/byteorder.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/machdep.h> -#include <asm/pci-bridge.h> -#include <asm/immap_cpm2.h> -#include <asm/mpc8260.h> - -#include "m8260_pci.h" - - -/* PCI bus configuration registers. - */ - -static void __init m8260_setup_pci(struct pci_controller *hose) -{ - volatile cpm2_map_t *immap = cpm2_immr; - unsigned long pocmr; - u16 tempShort; - -#ifndef CONFIG_ATC /* already done in U-Boot */ - /* - * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), - * and local bus for PCI (SIUMCR [LBPC]). - */ - immap->im_siu_conf.siu_82xx.sc_siumcr = 0x00640000; -#endif - - /* Make PCI lowest priority */ - /* Each 4 bits is a device bus request and the MS 4bits - is highest priority */ - /* Bus 4bit value - --- ---------- - CPM high 0b0000 - CPM middle 0b0001 - CPM low 0b0010 - PCI reguest 0b0011 - Reserved 0b0100 - Reserved 0b0101 - Internal Core 0b0110 - External Master 1 0b0111 - External Master 2 0b1000 - External Master 3 0b1001 - The rest are reserved */ - immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893; - - /* Park bus on core while modifying PCI Bus accesses */ - immap->im_siu_conf.siu_82xx.sc_ppc_acr = 0x6; - - /* - * Set up master window that allows the CPU to access PCI space. This - * window is set up using the first SIU PCIBR registers. - */ - immap->im_memctl.memc_pcimsk0 = MPC826x_PCI_MASK; - immap->im_memctl.memc_pcibr0 = MPC826x_PCI_BASE | PCIBR_ENABLE; - - /* Disable machine check on no response or target abort */ - immap->im_pci.pci_emr = cpu_to_le32(0x1fe7); - /* Release PCI RST (by default the PCI RST signal is held low) */ - immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN); - - /* give it some time */ - mdelay(1); - - /* - * Set up master window that allows the CPU to access PCI Memory (prefetch) - * space. This window is set up using the first set of Outbound ATU registers. - */ - immap->im_pci.pci_potar0 = cpu_to_le32(MPC826x_PCI_LOWER_MEM >> 12); - immap->im_pci.pci_pobar0 = cpu_to_le32((MPC826x_PCI_LOWER_MEM - MPC826x_PCI_MEM_OFFSET) >> 12); - pocmr = ((MPC826x_PCI_UPPER_MEM - MPC826x_PCI_LOWER_MEM) >> 12) ^ 0xfffff; - immap->im_pci.pci_pocmr0 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PREFETCH_EN); - - /* - * Set up master window that allows the CPU to access PCI Memory (non-prefetch) - * space. This window is set up using the second set of Outbound ATU registers. - */ - immap->im_pci.pci_potar1 = cpu_to_le32(MPC826x_PCI_LOWER_MMIO >> 12); - immap->im_pci.pci_pobar1 = cpu_to_le32((MPC826x_PCI_LOWER_MMIO - MPC826x_PCI_MMIO_OFFSET) >> 12); - pocmr = ((MPC826x_PCI_UPPER_MMIO - MPC826x_PCI_LOWER_MMIO) >> 12) ^ 0xfffff; - immap->im_pci.pci_pocmr1 = cpu_to_le32(pocmr | POCMR_ENABLE); - - /* - * Set up master window that allows the CPU to access PCI IO space. This window - * is set up using the third set of Outbound ATU registers. - */ - immap->im_pci.pci_potar2 = cpu_to_le32(MPC826x_PCI_IO_BASE >> 12); - immap->im_pci.pci_pobar2 = cpu_to_le32(MPC826x_PCI_LOWER_IO >> 12); - pocmr = ((MPC826x_PCI_UPPER_IO - MPC826x_PCI_LOWER_IO) >> 12) ^ 0xfffff; - immap->im_pci.pci_pocmr2 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PCI_IO); - - /* - * Set up slave window that allows PCI masters to access MPC826x local memory. - * This window is set up using the first set of Inbound ATU registers - */ - - immap->im_pci.pci_pitar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_LOCAL >> 12); - immap->im_pci.pci_pibar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_BUS >> 12); - pocmr = ((MPC826x_PCI_SLAVE_MEM_SIZE-1) >> 12) ^ 0xfffff; - immap->im_pci.pci_picmr0 = cpu_to_le32(pocmr | PICMR_ENABLE | PICMR_PREFETCH_EN); - - /* See above for description - puts PCI request as highest priority */ - immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567; - - /* Park the bus on the PCI */ - immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI; - - /* Host mode - specify the bridge as a host-PCI bridge */ - early_write_config_word(hose, 0, 0, PCI_CLASS_DEVICE, PCI_CLASS_BRIDGE_HOST); - - /* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */ - early_read_config_word(hose, 0, 0, PCI_COMMAND, &tempShort); - early_write_config_word(hose, 0, 0, PCI_COMMAND, - tempShort | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); -} - -void __init m8260_find_bridges(void) -{ - extern int pci_assign_all_busses; - struct pci_controller * hose; - - pci_assign_all_busses = 1; - - hose = pcibios_alloc_controller(); - - if (!hose) - return; - - ppc_md.pci_swizzle = common_swizzle; - - hose->first_busno = 0; - hose->bus_offset = 0; - hose->last_busno = 0xff; - - setup_m8260_indirect_pci(hose, - (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr, - (unsigned long)&cpm2_immr->im_pci.pci_cfg_data); - - m8260_setup_pci(hose); - hose->pci_mem_offset = MPC826x_PCI_MEM_OFFSET; - - hose->io_base_virt = ioremap(MPC826x_PCI_IO_BASE, - MPC826x_PCI_IO_SIZE); - isa_io_base = (unsigned long) hose->io_base_virt; - - /* setup resources */ - pci_init_resource(&hose->mem_resources[0], - MPC826x_PCI_LOWER_MEM, - MPC826x_PCI_UPPER_MEM, - IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory"); - - pci_init_resource(&hose->mem_resources[1], - MPC826x_PCI_LOWER_MMIO, - MPC826x_PCI_UPPER_MMIO, - IORESOURCE_MEM, "PCI memory"); - - pci_init_resource(&hose->io_resource, - MPC826x_PCI_LOWER_IO, - MPC826x_PCI_UPPER_IO, - IORESOURCE_IO, "PCI I/O"); -} diff --git a/arch/ppc/syslib/m8260_pci.h b/arch/ppc/syslib/m8260_pci.h deleted file mode 100644 index d1352120acd..00000000000 --- a/arch/ppc/syslib/m8260_pci.h +++ /dev/null @@ -1,76 +0,0 @@ - -#ifndef _PPC_KERNEL_M8260_PCI_H -#define _PPC_KERNEL_M8260_PCI_H - -#include <asm/m8260_pci.h> - -/* - * Local->PCI map (from CPU) controlled by - * MPC826x master window - * - * 0x80000000 - 0xBFFFFFFF Total CPU2PCI space PCIBR0 - * - * 0x80000000 - 0x9FFFFFFF PCI Mem with prefetch (Outbound ATU #1) - * 0xA0000000 - 0xAFFFFFFF PCI Mem w/o prefetch (Outbound ATU #2) - * 0xB0000000 - 0xB0FFFFFF 32-bit PCI IO (Outbound ATU #3) - * - * PCI->Local map (from PCI) - * MPC826x slave window controlled by - * - * 0x00000000 - 0x07FFFFFF MPC826x local memory (Inbound ATU #1) - */ - -/* - * Slave window that allows PCI masters to access MPC826x local memory. - * This window is set up using the first set of Inbound ATU registers - */ - -#ifndef MPC826x_PCI_SLAVE_MEM_LOCAL -#define MPC826x_PCI_SLAVE_MEM_LOCAL (((struct bd_info *)__res)->bi_memstart) -#define MPC826x_PCI_SLAVE_MEM_BUS (((struct bd_info *)__res)->bi_memstart) -#define MPC826x_PCI_SLAVE_MEM_SIZE (((struct bd_info *)__res)->bi_memsize) -#endif - -/* - * This is the window that allows the CPU to access PCI address space. - * It will be setup with the SIU PCIBR0 register. All three PCI master - * windows, which allow the CPU to access PCI prefetch, non prefetch, - * and IO space (see below), must all fit within this window. - */ -#ifndef MPC826x_PCI_BASE -#define MPC826x_PCI_BASE 0x80000000 -#define MPC826x_PCI_MASK 0xc0000000 -#endif - -#ifndef MPC826x_PCI_LOWER_MEM -#define MPC826x_PCI_LOWER_MEM 0x80000000 -#define MPC826x_PCI_UPPER_MEM 0x9fffffff -#define MPC826x_PCI_MEM_OFFSET 0x00000000 -#endif - -#ifndef MPC826x_PCI_LOWER_MMIO -#define MPC826x_PCI_LOWER_MMIO 0xa0000000 -#define MPC826x_PCI_UPPER_MMIO 0xafffffff -#define MPC826x_PCI_MMIO_OFFSET 0x00000000 -#endif - -#ifndef MPC826x_PCI_LOWER_IO -#define MPC826x_PCI_LOWER_IO 0x00000000 -#define MPC826x_PCI_UPPER_IO 0x00ffffff -#define MPC826x_PCI_IO_BASE 0xb0000000 -#define MPC826x_PCI_IO_SIZE 0x01000000 -#endif - -#ifndef _IO_BASE -#define _IO_BASE isa_io_base -#endif - -#ifdef CONFIG_8260_PCI9 -struct pci_controller; -extern void setup_m8260_indirect_pci(struct pci_controller* hose, - u32 cfg_addr, u32 cfg_data); -#else -#define setup_m8260_indirect_pci setup_indirect_pci -#endif - -#endif /* _PPC_KERNEL_M8260_PCI_H */ diff --git a/arch/ppc/syslib/m8260_pci_erratum9.c b/arch/ppc/syslib/m8260_pci_erratum9.c index 9c0582d639e..1dc7e4e1d49 100644 --- a/arch/ppc/syslib/m8260_pci_erratum9.c +++ b/arch/ppc/syslib/m8260_pci_erratum9.c @@ -31,7 +31,7 @@ #include <asm/immap_cpm2.h> #include <asm/cpm2.h> -#include "m8260_pci.h" +#include "m82xx_pci.h" #ifdef CONFIG_8260_PCI9 /*#include <asm/mpc8260_pci9.h>*/ /* included in asm/io.h */ @@ -248,11 +248,11 @@ EXPORT_SYMBOL(idma_pci9_read_le); static inline int is_pci_mem(unsigned long addr) { - if (addr >= MPC826x_PCI_LOWER_MMIO && - addr <= MPC826x_PCI_UPPER_MMIO) + if (addr >= M82xx_PCI_LOWER_MMIO && + addr <= M82xx_PCI_UPPER_MMIO) return 1; - if (addr >= MPC826x_PCI_LOWER_MEM && - addr <= MPC826x_PCI_UPPER_MEM) + if (addr >= M82xx_PCI_LOWER_MEM && + addr <= M82xx_PCI_UPPER_MEM) return 1; return 0; } diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c index 23ea3f694de..fda75d79050 100644 --- a/arch/ppc/syslib/m8260_setup.c +++ b/arch/ppc/syslib/m8260_setup.c @@ -34,7 +34,8 @@ unsigned char __res[sizeof(bd_t)]; extern void cpm2_reset(void); -extern void m8260_find_bridges(void); +extern void pq2_find_bridges(void); +extern void pq2pci_init_irq(void); extern void idma_pci9_init(void); /* Place-holder for board-specific init */ @@ -56,7 +57,7 @@ m8260_setup_arch(void) idma_pci9_init(); #endif #ifdef CONFIG_PCI_8260 - m8260_find_bridges(); + pq2_find_bridges(); #endif #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) @@ -173,6 +174,12 @@ m8260_init_IRQ(void) * in case the boot rom changed something on us. */ cpm2_immr->im_intctl.ic_siprr = 0x05309770; + +#if defined(CONFIG_PCI) && (defined(CONFIG_ADS8272) || defined(CONFIG_PQ2FADS)) + /* Initialize stuff for the 82xx CPLD IC and install demux */ + pq2pci_init_irq(); +#endif + } /* diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c new file mode 100644 index 00000000000..5e7a7edcea7 --- /dev/null +++ b/arch/ppc/syslib/m82xx_pci.c @@ -0,0 +1,383 @@ +/* + * + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 Red Hat, Inc. + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/interrupt.h> + +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/uaccess.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/immap_cpm2.h> +#include <asm/mpc8260.h> +#include <asm/cpm2.h> + +#include "m82xx_pci.h" + +/* + * Interrupt routing + */ + +static inline int +pq2pci_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { PIRQA, PIRQB, PIRQC, PIRQD }, /* IDSEL 22 - PCI slot 0 */ + { PIRQD, PIRQA, PIRQB, PIRQC }, /* IDSEL 23 - PCI slot 1 */ + { PIRQC, PIRQD, PIRQA, PIRQB }, /* IDSEL 24 - PCI slot 2 */ + }; + + const long min_idsel = 22, max_idsel = 24, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +static void +pq2pci_mask_irq(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit)); + return; +} + +static void +pq2pci_unmask_irq(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit)); + return; +} + +static void +pq2pci_mask_and_ack(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit)); + return; +} + +static void +pq2pci_end_irq(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit)); + return; +} + +struct hw_interrupt_type pq2pci_ic = { + "PQ2 PCI", + NULL, + NULL, + pq2pci_unmask_irq, + pq2pci_mask_irq, + pq2pci_mask_and_ack, + pq2pci_end_irq, + 0 +}; + +static irqreturn_t +pq2pci_irq_demux(int irq, void *dev_id, struct pt_regs *regs) +{ + unsigned long stat, mask, pend; + int bit; + + for(;;) { + stat = *(volatile unsigned long *) PCI_INT_STAT_REG; + mask = *(volatile unsigned long *) PCI_INT_MASK_REG; + pend = stat & ~mask & 0xf0000000; + if (!pend) + break; + for (bit = 0; pend != 0; ++bit, pend <<= 1) { + if (pend & 0x80000000) + __do_IRQ(NR_CPM_INTS + bit, regs); + } + } + + return IRQ_HANDLED; +} + +static struct irqaction pq2pci_irqaction = { + .handler = pq2pci_irq_demux, + .flags = SA_INTERRUPT, + .mask = CPU_MASK_NONE, + .name = "PQ2 PCI cascade", +}; + + +void +pq2pci_init_irq(void) +{ + int irq; + volatile cpm2_map_t *immap = cpm2_immr; +#if defined CONFIG_ADS8272 + /* configure chip select for PCI interrupt controller */ + immap->im_memctl.memc_br3 = PCI_INT_STAT_REG | 0x00001801; + immap->im_memctl.memc_or3 = 0xffff8010; +#elif defined CONFIG_PQ2FADS + immap->im_memctl.memc_br8 = PCI_INT_STAT_REG | 0x00001801; + immap->im_memctl.memc_or8 = 0xffff8010; +#endif + for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++) + irq_desc[irq].handler = &pq2pci_ic; + + /* make PCI IRQ level sensitive */ + immap->im_intctl.ic_siexr &= + ~(1 << (14 - (PCI_INT_TO_SIU - SIU_INT_IRQ1))); + + /* mask all PCI interrupts */ + *(volatile unsigned long *) PCI_INT_MASK_REG |= 0xfff00000; + + /* install the demultiplexer for the PCI cascade interrupt */ + setup_irq(PCI_INT_TO_SIU, &pq2pci_irqaction); + return; +} + +static int +pq2pci_exclude_device(u_char bus, u_char devfn) +{ + return PCIBIOS_SUCCESSFUL; +} + +/* PCI bus configuration registers. + */ +static void +pq2ads_setup_pci(struct pci_controller *hose) +{ + __u32 val; + volatile cpm2_map_t *immap = cpm2_immr; + bd_t* binfo = (bd_t*) __res; + u32 sccr = immap->im_clkrst.car_sccr; + uint pci_div,freq,time; + /* PCI int lowest prio */ + /* Each 4 bits is a device bus request and the MS 4bits + is highest priority */ + /* Bus 4bit value + --- ---------- + CPM high 0b0000 + CPM middle 0b0001 + CPM low 0b0010 + PCI reguest 0b0011 + Reserved 0b0100 + Reserved 0b0101 + Internal Core 0b0110 + External Master 1 0b0111 + External Master 2 0b1000 + External Master 3 0b1001 + The rest are reserved + */ + immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893; + /* park bus on core */ + immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_CORE; + /* + * Set up master windows that allow the CPU to access PCI space. These + * windows are set up using the two SIU PCIBR registers. + */ + + immap->im_memctl.memc_pcimsk0 = M82xx_PCI_PRIM_WND_SIZE; + immap->im_memctl.memc_pcibr0 = M82xx_PCI_PRIM_WND_BASE | PCIBR_ENABLE; + +#ifdef M82xx_PCI_SEC_WND_SIZE + immap->im_memctl.memc_pcimsk1 = M82xx_PCI_SEC_WND_SIZE; + immap->im_memctl.memc_pcibr1 = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE; +#endif + +#if defined CONFIG_ADS8272 + immap->im_siu_conf.siu_82xx.sc_siumcr = + (immap->im_siu_conf.siu_82xx.sc_siumcr & + ~(SIUMCR_BBD | SIUMCR_ESE | SIUMCR_PBSE | + SIUMCR_CDIS | SIUMCR_DPPC11 | SIUMCR_L2CPC11 | + SIUMCR_LBPC11 | SIUMCR_APPC11 | + SIUMCR_CS10PC11 | SIUMCR_BCTLC11 | SIUMCR_MMR11)) | + SIUMCR_DPPC11 | SIUMCR_L2CPC01 | SIUMCR_LBPC00 | + SIUMCR_APPC10 | SIUMCR_CS10PC00 | + SIUMCR_BCTLC00 | SIUMCR_MMR11 ; + +#elif defined CONFIG_PQ2FADS + /* + * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), + * and local bus for PCI (SIUMCR [LBPC]). + */ + immap->im_siu_conf.siu_82xx.sc_siumcr = (immap->im_siu_conf.sc_siumcr & + ~(SIUMCR_L2PC11 | SIUMCR_LBPC11 | SIUMCR_CS10PC11 | SIUMCR_APPC11) | + SIUMCR_BBD | SIUMCR_LBPC01 | SIUMCR_DPPC11 | SIUMCR_APPC10; +#endif + /* Enable PCI */ + immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN); + + pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) * + ( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1); + freq = (uint)((2*binfo->bi_cpmfreq)/(pci_div)); + time = (int)666666/freq; + /* due to PCI Local Bus spec, some devices needs to wait such a long + time after RST deassertion. More specifically, 0.508s for 66MHz & twice more for 33 */ + printk("%s: The PCI bus is %d Mhz.\nWaiting %s after deasserting RST...\n",__FILE__,freq, + (time==1) ? "0.5 seconds":"1 second" ); + + { + int i; + for(i=0;i<(500*time);i++) + udelay(1000); + } + + /* setup ATU registers */ + immap->im_pci.pci_pocmr0 = cpu_to_le32(POCMR_ENABLE | POCMR_PCI_IO | + ((~(M82xx_PCI_IO_SIZE - 1U)) >> POTA_ADDR_SHIFT)); + immap->im_pci.pci_potar0 = cpu_to_le32(M82xx_PCI_LOWER_IO >> POTA_ADDR_SHIFT); + immap->im_pci.pci_pobar0 = cpu_to_le32(M82xx_PCI_IO_BASE >> POTA_ADDR_SHIFT); + + /* Set-up non-prefetchable window */ + immap->im_pci.pci_pocmr1 = cpu_to_le32(POCMR_ENABLE | ((~(M82xx_PCI_MMIO_SIZE-1U)) >> POTA_ADDR_SHIFT)); + immap->im_pci.pci_potar1 = cpu_to_le32(M82xx_PCI_LOWER_MMIO >> POTA_ADDR_SHIFT); + immap->im_pci.pci_pobar1 = cpu_to_le32((M82xx_PCI_LOWER_MMIO - M82xx_PCI_MMIO_OFFSET) >> POTA_ADDR_SHIFT); + + /* Set-up prefetchable window */ + immap->im_pci.pci_pocmr2 = cpu_to_le32(POCMR_ENABLE |POCMR_PREFETCH_EN | + (~(M82xx_PCI_MEM_SIZE-1U) >> POTA_ADDR_SHIFT)); + immap->im_pci.pci_potar2 = cpu_to_le32(M82xx_PCI_LOWER_MEM >> POTA_ADDR_SHIFT); + immap->im_pci.pci_pobar2 = cpu_to_le32((M82xx_PCI_LOWER_MEM - M82xx_PCI_MEM_OFFSET) >> POTA_ADDR_SHIFT); + + /* Inbound transactions from PCI memory space */ + immap->im_pci.pci_picmr0 = cpu_to_le32(PICMR_ENABLE | PICMR_PREFETCH_EN | + ((~(M82xx_PCI_SLAVE_MEM_SIZE-1U)) >> PITA_ADDR_SHIFT)); + immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS >> PITA_ADDR_SHIFT); + immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT); + +#if defined CONFIG_ADS8272 + /* PCI int highest prio */ + immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x01236745; +#elif defined CONFIG_PQ2FADS + immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567; +#endif + /* park bus on PCI */ + immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI; + + /* Enable bus mastering and inbound memory transactions */ + early_read_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, &val); + val &= 0xffff0000; + val |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER; + early_write_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, val); + +} + +void __init pq2_find_bridges(void) +{ + extern int pci_assign_all_busses; + struct pci_controller * hose; + int host_bridge; + + pci_assign_all_busses = 1; + + hose = pcibios_alloc_controller(); + + if (!hose) + return; + + ppc_md.pci_swizzle = common_swizzle; + + hose->first_busno = 0; + hose->bus_offset = 0; + hose->last_busno = 0xff; + +#ifdef CONFIG_ADS8272 + hose->set_cfg_type = 1; +#endif + + setup_m8260_indirect_pci(hose, + (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr, + (unsigned long)&cpm2_immr->im_pci.pci_cfg_data); + + /* Make sure it is a supported bridge */ + early_read_config_dword(hose, + 0, + PCI_DEVFN(0,0), + PCI_VENDOR_ID, + &host_bridge); + switch (host_bridge) { + case PCI_DEVICE_ID_MPC8265: + break; + case PCI_DEVICE_ID_MPC8272: + break; + default: + printk("Attempting to use unrecognized host bridge ID" + " 0x%08x.\n", host_bridge); + break; + } + + pq2ads_setup_pci(hose); + + hose->io_space.start = M82xx_PCI_LOWER_IO; + hose->io_space.end = M82xx_PCI_UPPER_IO; + hose->mem_space.start = M82xx_PCI_LOWER_MEM; + hose->mem_space.end = M82xx_PCI_UPPER_MMIO; + hose->pci_mem_offset = M82xx_PCI_MEM_OFFSET; + + isa_io_base = + (unsigned long) ioremap(M82xx_PCI_IO_BASE, + M82xx_PCI_IO_SIZE); + hose->io_base_virt = (void *) isa_io_base; + + /* setup resources */ + pci_init_resource(&hose->mem_resources[0], + M82xx_PCI_LOWER_MEM, + M82xx_PCI_UPPER_MEM, + IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory"); + + pci_init_resource(&hose->mem_resources[1], + M82xx_PCI_LOWER_MMIO, + M82xx_PCI_UPPER_MMIO, + IORESOURCE_MEM, "PCI memory"); + + pci_init_resource(&hose->io_resource, + M82xx_PCI_LOWER_IO, + M82xx_PCI_UPPER_IO, + IORESOURCE_IO | 1, "PCI I/O"); + + ppc_md.pci_exclude_device = pq2pci_exclude_device; + hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); + + ppc_md.pci_map_irq = pq2pci_map_irq; + ppc_md.pcibios_fixup = NULL; + ppc_md.pcibios_fixup_bus = NULL; + +} diff --git a/arch/ppc/syslib/m82xx_pci.h b/arch/ppc/syslib/m82xx_pci.h new file mode 100644 index 00000000000..924f73f8e59 --- /dev/null +++ b/arch/ppc/syslib/m82xx_pci.h @@ -0,0 +1,92 @@ + +#ifndef _PPC_KERNEL_M82XX_PCI_H +#define _PPC_KERNEL_M82XX_PCI_H + +#include <asm/m8260_pci.h> +/* + * Local->PCI map (from CPU) controlled by + * MPC826x master window + * + * 0xF6000000 - 0xF7FFFFFF IO space + * 0x80000000 - 0xBFFFFFFF CPU2PCI memory space PCIBR0 + * + * 0x80000000 - 0x9FFFFFFF PCI Mem with prefetch (Outbound ATU #1) + * 0xA0000000 - 0xBFFFFFFF PCI Mem w/o prefetch (Outbound ATU #2) + * 0xF6000000 - 0xF7FFFFFF 32-bit PCI IO (Outbound ATU #3) + * + * PCI->Local map (from PCI) + * MPC826x slave window controlled by + * + * 0x00000000 - 0x07FFFFFF MPC826x local memory (Inbound ATU #1) + */ + +/* + * Slave window that allows PCI masters to access MPC826x local memory. + * This window is set up using the first set of Inbound ATU registers + */ + +#ifndef M82xx_PCI_SLAVE_MEM_LOCAL +#define M82xx_PCI_SLAVE_MEM_LOCAL (((struct bd_info *)__res)->bi_memstart) +#define M82xx_PCI_SLAVE_MEM_BUS (((struct bd_info *)__res)->bi_memstart) +#define M82xx_PCI_SLAVE_MEM_SIZE (((struct bd_info *)__res)->bi_memsize) +#endif + +/* + * This is the window that allows the CPU to access PCI address space. + * It will be setup with the SIU PCIBR0 register. All three PCI master + * windows, which allow the CPU to access PCI prefetch, non prefetch, + * and IO space (see below), must all fit within this window. + */ + +#ifndef M82xx_PCI_LOWER_MEM +#define M82xx_PCI_LOWER_MEM 0x80000000 +#define M82xx_PCI_UPPER_MEM 0x9fffffff +#define M82xx_PCI_MEM_OFFSET 0x00000000 +#define M82xx_PCI_MEM_SIZE 0x20000000 +#endif + +#ifndef M82xx_PCI_LOWER_MMIO +#define M82xx_PCI_LOWER_MMIO 0xa0000000 +#define M82xx_PCI_UPPER_MMIO 0xafffffff +#define M82xx_PCI_MMIO_OFFSET 0x00000000 +#define M82xx_PCI_MMIO_SIZE 0x20000000 +#endif + +#ifndef M82xx_PCI_LOWER_IO +#define M82xx_PCI_LOWER_IO 0x00000000 +#define M82xx_PCI_UPPER_IO 0x01ffffff +#define M82xx_PCI_IO_BASE 0xf6000000 +#define M82xx_PCI_IO_SIZE 0x02000000 +#endif + +#ifndef M82xx_PCI_PRIM_WND_SIZE +#define M82xx_PCI_PRIM_WND_SIZE ~(M82xx_PCI_IO_SIZE - 1U) +#define M82xx_PCI_PRIM_WND_BASE (M82xx_PCI_IO_BASE) +#endif + +#ifndef M82xx_PCI_SEC_WND_SIZE +#define M82xx_PCI_SEC_WND_SIZE ~(M82xx_PCI_MEM_SIZE + M82xx_PCI_MMIO_SIZE - 1U) +#define M82xx_PCI_SEC_WND_BASE (M82xx_PCI_LOWER_MEM) +#endif + +#ifndef POTA_ADDR_SHIFT +#define POTA_ADDR_SHIFT 12 +#endif + +#ifndef PITA_ADDR_SHIFT +#define PITA_ADDR_SHIFT 12 +#endif + +#ifndef _IO_BASE +#define _IO_BASE isa_io_base +#endif + +#ifdef CONFIG_8260_PCI9 +struct pci_controller; +extern void setup_m8260_indirect_pci(struct pci_controller* hose, + u32 cfg_addr, u32 cfg_data); +#else +#define setup_m8260_indirect_pci setup_indirect_pci +#endif + +#endif /* _PPC_KERNEL_M8260_PCI_H */ diff --git a/arch/ppc/syslib/mpc83xx_devices.c b/arch/ppc/syslib/mpc83xx_devices.c index 5c1a919eaab..75c8e9834ae 100644 --- a/arch/ppc/syslib/mpc83xx_devices.c +++ b/arch/ppc/syslib/mpc83xx_devices.c @@ -61,6 +61,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, }, + { }, }; struct platform_device ppc_sys_platform_devices[] = { diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c index a231795ee26..1e658ef57e7 100644 --- a/arch/ppc/syslib/mpc85xx_devices.c +++ b/arch/ppc/syslib/mpc85xx_devices.c @@ -61,6 +61,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ, }, + { }, }; struct platform_device ppc_sys_platform_devices[] = { diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c index 7619e16fcca..000ba47c67c 100644 --- a/arch/ppc/syslib/open_pic.c +++ b/arch/ppc/syslib/open_pic.c @@ -275,7 +275,7 @@ static void __init openpic_enable_sie(void) } #endif -#if defined(CONFIG_EPIC_SERIAL_MODE) || defined(CONFIG_PM) +#if defined(CONFIG_EPIC_SERIAL_MODE) static void openpic_reset(void) { openpic_setfield(&OpenPIC->Global.Global_Configuration0, @@ -557,12 +557,10 @@ static void __init openpic_initipi(u_int ipi, u_int pri, u_int vec) */ void openpic_cause_IPI(u_int ipi, cpumask_t cpumask) { - cpumask_t phys; DECL_THIS_CPU; CHECK_THIS_CPU; check_arg_ipi(ipi); - phys = physmask(cpumask); openpic_write(&OpenPIC->THIS_CPU.IPI_Dispatch(ipi), cpus_addr(physmask(cpumask))[0]); } @@ -995,8 +993,6 @@ int openpic_resume(struct sys_device *sysdev) return 0; } - openpic_reset(); - /* OpenPIC sometimes seem to need some time to be fully back up... */ do { openpic_set_spurious(OPENPIC_VEC_SPURIOUS); diff --git a/arch/ppc/syslib/ppc83xx_setup.c b/arch/ppc/syslib/ppc83xx_setup.c index c28f9d67948..843cf8873e6 100644 --- a/arch/ppc/syslib/ppc83xx_setup.c +++ b/arch/ppc/syslib/ppc83xx_setup.c @@ -29,6 +29,7 @@ #include <asm/mmu.h> #include <asm/ppc_sys.h> #include <asm/kgdb.h> +#include <asm/delay.h> #include <syslib/ppc83xx_setup.h> @@ -117,7 +118,34 @@ mpc83xx_early_serial_map(void) void mpc83xx_restart(char *cmd) { + volatile unsigned char __iomem *reg; + unsigned char tmp; + + reg = ioremap(BCSR_PHYS_ADDR, BCSR_SIZE); + local_irq_disable(); + + /* + * Unlock the BCSR bits so a PRST will update the contents. + * Otherwise the reset asserts but doesn't clear. + */ + tmp = in_8(reg + BCSR_MISC_REG3_OFF); + tmp |= BCSR_MISC_REG3_CNFLOCK; /* low true, high false */ + out_8(reg + BCSR_MISC_REG3_OFF, tmp); + + /* + * Trigger a reset via a low->high transition of the + * PORESET bit. + */ + tmp = in_8(reg + BCSR_MISC_REG2_OFF); + tmp &= ~BCSR_MISC_REG2_PORESET; + out_8(reg + BCSR_MISC_REG2_OFF, tmp); + + udelay(1); + + tmp |= BCSR_MISC_REG2_PORESET; + out_8(reg + BCSR_MISC_REG2_OFF, tmp); + for(;;); } diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c index 152c3ef1312..f3277f469e7 100644 --- a/arch/ppc/syslib/ppc85xx_setup.c +++ b/arch/ppc/syslib/ppc85xx_setup.c @@ -132,6 +132,12 @@ mpc85xx_halt(void) } #ifdef CONFIG_PCI + +#if defined(CONFIG_MPC8555_CDS) +extern void mpc85xx_cds_enable_via(struct pci_controller *hose); +extern void mpc85xx_cds_fixup_via(struct pci_controller *hose); +#endif + static void __init mpc85xx_setup_pci1(struct pci_controller *hose) { @@ -302,8 +308,18 @@ mpc85xx_setup_hose(void) ppc_md.pci_exclude_device = mpc85xx_exclude_device; +#if defined(CONFIG_MPC8555_CDS) + /* Pre pciauto_bus_scan VIA init */ + mpc85xx_cds_enable_via(hose_a); +#endif + hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno); +#if defined(CONFIG_MPC8555_CDS) + /* Post pciauto_bus_scan VIA fixup */ + mpc85xx_cds_fixup_via(hose_a); +#endif + #ifdef CONFIG_85xx_PCI2 hose_b = pcibios_alloc_controller(); diff --git a/arch/ppc/syslib/prom_init.c b/arch/ppc/syslib/prom_init.c index 2cee87137f2..7f15136830f 100644 --- a/arch/ppc/syslib/prom_init.c +++ b/arch/ppc/syslib/prom_init.c @@ -626,8 +626,18 @@ inspect_node(phandle node, struct device_node *dad, l = call_prom("package-to-path", 3, 1, node, mem_start, mem_end - mem_start); if (l >= 0) { + char *p, *ep; + np->full_name = PTRUNRELOC((char *) mem_start); *(char *)(mem_start + l) = 0; + /* Fixup an Apple bug where they have bogus \0 chars in the + * middle of the path in some properties + */ + for (p = (char *)mem_start, ep = p + l; p < ep; p++) + if ((*p) == '\0') { + memmove(p, p+1, ep - p); + ep--; + } mem_start = ALIGNUL(mem_start + l + 1); } diff --git a/arch/ppc64/kernel/mf.c b/arch/ppc64/kernel/mf.c index 1bd52ece497..5aca7e8005a 100644 --- a/arch/ppc64/kernel/mf.c +++ b/arch/ppc64/kernel/mf.c @@ -1,7 +1,7 @@ /* * mf.c * Copyright (C) 2001 Troy D. Armstrong IBM Corporation - * Copyright (C) 2004 Stephen Rothwell IBM Corporation + * Copyright (C) 2004-2005 Stephen Rothwell IBM Corporation * * This modules exists as an interface between a Linux secondary partition * running on an iSeries and the primary partition's Virtual Service @@ -36,10 +36,12 @@ #include <asm/time.h> #include <asm/uaccess.h> +#include <asm/paca.h> #include <asm/iSeries/vio.h> #include <asm/iSeries/mf.h> #include <asm/iSeries/HvLpConfig.h> #include <asm/iSeries/ItSpCommArea.h> +#include <asm/iSeries/ItLpQueue.h> /* * This is the structure layout for the Machine Facilites LPAR event @@ -696,36 +698,23 @@ static void get_rtc_time_complete(void *token, struct ce_msg_data *ce_msg) complete(&rtc->com); } -int mf_get_rtc(struct rtc_time *tm) +static int rtc_set_tm(int rc, u8 *ce_msg, struct rtc_time *tm) { - struct ce_msg_comp_data ce_complete; - struct rtc_time_data rtc_data; - int rc; - - memset(&ce_complete, 0, sizeof(ce_complete)); - memset(&rtc_data, 0, sizeof(rtc_data)); - init_completion(&rtc_data.com); - ce_complete.handler = &get_rtc_time_complete; - ce_complete.token = &rtc_data; - rc = signal_ce_msg_simple(0x40, &ce_complete); - if (rc) - return rc; - wait_for_completion(&rtc_data.com); tm->tm_wday = 0; tm->tm_yday = 0; tm->tm_isdst = 0; - if (rtc_data.rc) { + if (rc) { tm->tm_sec = 0; tm->tm_min = 0; tm->tm_hour = 0; tm->tm_mday = 15; tm->tm_mon = 5; tm->tm_year = 52; - return rtc_data.rc; + return rc; } - if ((rtc_data.ce_msg.ce_msg[2] == 0xa9) || - (rtc_data.ce_msg.ce_msg[2] == 0xaf)) { + if ((ce_msg[2] == 0xa9) || + (ce_msg[2] == 0xaf)) { /* TOD clock is not set */ tm->tm_sec = 1; tm->tm_min = 1; @@ -736,7 +725,6 @@ int mf_get_rtc(struct rtc_time *tm) mf_set_rtc(tm); } { - u8 *ce_msg = rtc_data.ce_msg.ce_msg; u8 year = ce_msg[5]; u8 sec = ce_msg[6]; u8 min = ce_msg[7]; @@ -765,6 +753,63 @@ int mf_get_rtc(struct rtc_time *tm) return 0; } +int mf_get_rtc(struct rtc_time *tm) +{ + struct ce_msg_comp_data ce_complete; + struct rtc_time_data rtc_data; + int rc; + + memset(&ce_complete, 0, sizeof(ce_complete)); + memset(&rtc_data, 0, sizeof(rtc_data)); + init_completion(&rtc_data.com); + ce_complete.handler = &get_rtc_time_complete; + ce_complete.token = &rtc_data; + rc = signal_ce_msg_simple(0x40, &ce_complete); + if (rc) + return rc; + wait_for_completion(&rtc_data.com); + return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm); +} + +struct boot_rtc_time_data { + int busy; + struct ce_msg_data ce_msg; + int rc; +}; + +static void get_boot_rtc_time_complete(void *token, struct ce_msg_data *ce_msg) +{ + struct boot_rtc_time_data *rtc = token; + + memcpy(&rtc->ce_msg, ce_msg, sizeof(rtc->ce_msg)); + rtc->rc = 0; + rtc->busy = 0; +} + +int mf_get_boot_rtc(struct rtc_time *tm) +{ + struct ce_msg_comp_data ce_complete; + struct boot_rtc_time_data rtc_data; + int rc; + + memset(&ce_complete, 0, sizeof(ce_complete)); + memset(&rtc_data, 0, sizeof(rtc_data)); + rtc_data.busy = 1; + ce_complete.handler = &get_boot_rtc_time_complete; + ce_complete.token = &rtc_data; + rc = signal_ce_msg_simple(0x40, &ce_complete); + if (rc) + return rc; + /* We need to poll here as we are not yet taking interrupts */ + while (rtc_data.busy) { + extern unsigned long lpevent_count; + struct ItLpQueue *lpq = get_paca()->lpqueue_ptr; + if (lpq && ItLpQueue_isLpIntPending(lpq)) + lpevent_count += ItLpQueue_process(lpq, NULL); + } + return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm); +} + int mf_set_rtc(struct rtc_time *tm) { char ce_time[12]; diff --git a/arch/ppc64/kernel/pSeries_reconfig.c b/arch/ppc64/kernel/pSeries_reconfig.c index cb5443f2e49..dc2a69d412a 100644 --- a/arch/ppc64/kernel/pSeries_reconfig.c +++ b/arch/ppc64/kernel/pSeries_reconfig.c @@ -47,14 +47,6 @@ static void remove_node_proc_entries(struct device_node *np) remove_proc_entry(pp->name, np->pde); pp = pp->next; } - - /* Assuming that symlinks have the same parent directory as - * np->pde. - */ - if (np->name_link) - remove_proc_entry(np->name_link->name, parent->pde); - if (np->addr_link) - remove_proc_entry(np->addr_link->name, parent->pde); if (np->pde) remove_proc_entry(np->pde->name, parent->pde); } diff --git a/arch/ppc64/kernel/pmac_smp.c b/arch/ppc64/kernel/pmac_smp.c index c27588ede2f..a23de37227b 100644 --- a/arch/ppc64/kernel/pmac_smp.c +++ b/arch/ppc64/kernel/pmac_smp.c @@ -68,6 +68,7 @@ extern struct smp_ops_t *smp_ops; static void (*pmac_tb_freeze)(int freeze); static struct device_node *pmac_tb_clock_chip_host; +static u8 pmac_tb_pulsar_addr; static DEFINE_SPINLOCK(timebase_lock); static unsigned long timebase; @@ -106,12 +107,9 @@ static void smp_core99_pulsar_tb_freeze(int freeze) u8 data; int rc; - /* Strangely, the device-tree says address is 0xd2, but darwin - * accesses 0xd0 ... - */ pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined); rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, - 0xd4 | pmac_low_i2c_read, + pmac_tb_pulsar_addr | pmac_low_i2c_read, 0x2e, &data, 1); if (rc != 0) goto bail; @@ -120,7 +118,7 @@ static void smp_core99_pulsar_tb_freeze(int freeze) pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub); rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, - 0xd4 | pmac_low_i2c_write, + pmac_tb_pulsar_addr | pmac_low_i2c_write, 0x2e, &data, 1); bail: if (rc != 0) { @@ -185,6 +183,12 @@ static int __init smp_core99_probe(void) if (ncpus <= 1) return 1; + /* HW sync only on these platforms */ + if (!machine_is_compatible("PowerMac7,2") && + !machine_is_compatible("PowerMac7,3") && + !machine_is_compatible("RackMac3,1")) + goto nohwsync; + /* Look for the clock chip */ for (cc = NULL; (cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL;) { struct device_node *p = of_get_parent(cc); @@ -198,11 +202,18 @@ static int __init smp_core99_probe(void) goto next; switch (*reg) { case 0xd2: - pmac_tb_freeze = smp_core99_cypress_tb_freeze; - printk(KERN_INFO "Timebase clock is Cypress chip\n"); + if (device_is_compatible(cc, "pulsar-legacy-slewing")) { + pmac_tb_freeze = smp_core99_pulsar_tb_freeze; + pmac_tb_pulsar_addr = 0xd2; + printk(KERN_INFO "Timebase clock is Pulsar chip\n"); + } else if (device_is_compatible(cc, "cy28508")) { + pmac_tb_freeze = smp_core99_cypress_tb_freeze; + printk(KERN_INFO "Timebase clock is Cypress chip\n"); + } break; case 0xd4: pmac_tb_freeze = smp_core99_pulsar_tb_freeze; + pmac_tb_pulsar_addr = 0xd4; printk(KERN_INFO "Timebase clock is Pulsar chip\n"); break; } @@ -210,12 +221,15 @@ static int __init smp_core99_probe(void) pmac_tb_clock_chip_host = p; smp_ops->give_timebase = smp_core99_give_timebase; smp_ops->take_timebase = smp_core99_take_timebase; + of_node_put(cc); + of_node_put(p); break; } next: of_node_put(p); } + nohwsync: mpic_request_ipis(); return ncpus; diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index 35ec42de962..3de950de367 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -1566,7 +1566,7 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, { int l, align; phandle child; - char *namep, *prev_name, *sstart; + char *namep, *prev_name, *sstart, *p, *ep; unsigned long soff; unsigned char *valp; unsigned long offset = reloc_offset(); @@ -1588,6 +1588,14 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, call_prom("package-to-path", 3, 1, node, namep, l); } namep[l] = '\0'; + /* Fixup an Apple bug where they have bogus \0 chars in the + * middle of the path in some properties + */ + for (p = namep, ep = namep + l; p < ep; p++) + if (*p == '\0') { + memmove(p, p+1, ep - p); + ep--; l--; + } *mem_start = _ALIGN(((unsigned long) namep) + strlen(namep) + 1, 4); } @@ -1750,7 +1758,44 @@ static void __init flatten_device_tree(void) prom_printf("Device tree struct 0x%x -> 0x%x\n", RELOC(dt_struct_start), RELOC(dt_struct_end)); - } +} + + +static void __init fixup_device_tree(void) +{ + unsigned long offset = reloc_offset(); + phandle u3, i2c, mpic; + u32 u3_rev; + u32 interrupts[2]; + u32 parent; + + /* Some G5s have a missing interrupt definition, fix it up here */ + u3 = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000")); + if ((long)u3 <= 0) + return; + i2c = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000")); + if ((long)i2c <= 0) + return; + mpic = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000")); + if ((long)mpic <= 0) + return; + + /* check if proper rev of u3 */ + if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) <= 0) + return; + if (u3_rev != 0x35) + return; + /* does it need fixup ? */ + if (prom_getproplen(i2c, "interrupts") > 0) + return; + /* interrupt on this revision of u3 is number 0 and level */ + interrupts[0] = 0; + interrupts[1] = 1; + prom_setprop(i2c, "interrupts", &interrupts, sizeof(interrupts)); + parent = (u32)mpic; + prom_setprop(i2c, "interrupt-parent", &parent, sizeof(parent)); +} + static void __init prom_find_boot_cpu(void) { @@ -1844,6 +1889,12 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long &getprop_rval, sizeof(getprop_rval)); /* + * On pSeries, inform the firmware about our capabilities + */ + if (RELOC(of_platform) & PLATFORM_PSERIES) + prom_send_capabilities(); + + /* * On pSeries, copy the CPU hold code */ if (RELOC(of_platform) & PLATFORM_PSERIES) @@ -1920,6 +1971,11 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long } /* + * Fixup any known bugs in the device-tree + */ + fixup_device_tree(); + + /* * Now finally create the flattened device-tree */ prom_printf("copying OF device tree ...\n"); diff --git a/arch/ppc64/kernel/rtc.c b/arch/ppc64/kernel/rtc.c index 3e70b91375f..67989055a9f 100644 --- a/arch/ppc64/kernel/rtc.c +++ b/arch/ppc64/kernel/rtc.c @@ -292,47 +292,10 @@ int iSeries_set_rtc_time(struct rtc_time *tm) void iSeries_get_boot_time(struct rtc_time *tm) { - unsigned long time; - static unsigned long lastsec = 1; - - u32 dataWord1 = *((u32 *)(&xSpCommArea.xBcdTimeAtIplStart)); - u32 dataWord2 = *(((u32 *)&(xSpCommArea.xBcdTimeAtIplStart)) + 1); - int year = 1970; - int year1 = ( dataWord1 >> 24 ) & 0x000000FF; - int year2 = ( dataWord1 >> 16 ) & 0x000000FF; - int sec = ( dataWord1 >> 8 ) & 0x000000FF; - int min = dataWord1 & 0x000000FF; - int hour = ( dataWord2 >> 24 ) & 0x000000FF; - int day = ( dataWord2 >> 8 ) & 0x000000FF; - int mon = dataWord2 & 0x000000FF; - if ( piranha_simulator ) return; - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hour); - BCD_TO_BIN(day); - BCD_TO_BIN(mon); - BCD_TO_BIN(year1); - BCD_TO_BIN(year2); - year = year1 * 100 + year2; - - time = mktime(year, mon, day, hour, min, sec); - time += ( jiffies / HZ ); - - /* Now THIS is a nasty hack! - * It ensures that the first two calls get different answers. - * That way the loop in init_time (time.c) will not think - * the clock is stuck. - */ - if ( lastsec ) { - time -= lastsec; - --lastsec; - } - - to_tm(time, tm); - tm->tm_year -= 1900; + mf_get_boot_rtc(tm); tm->tm_mon -= 1; } #endif diff --git a/arch/ppc64/kernel/time.c b/arch/ppc64/kernel/time.c index 772a465b49f..33364a7d2cd 100644 --- a/arch/ppc64/kernel/time.c +++ b/arch/ppc64/kernel/time.c @@ -325,9 +325,7 @@ int timer_interrupt(struct pt_regs * regs) irq_enter(); -#ifndef CONFIG_PPC_ISERIES profile_tick(CPU_PROFILING, regs); -#endif lpaca->lppaca.int_dword.fields.decr_int = 0; @@ -515,6 +513,7 @@ void __init time_init(void) do_gtod.varp = &do_gtod.vars[0]; do_gtod.var_idx = 0; do_gtod.varp->tb_orig_stamp = tb_last_stamp; + get_paca()->next_jiffy_update_tb = tb_last_stamp + tb_ticks_per_jiffy; do_gtod.varp->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC; do_gtod.tb_ticks_per_sec = tb_ticks_per_sec; do_gtod.varp->tb_to_xs = tb_to_xs; diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c index 292983413ae..2803bc7c2c7 100644 --- a/arch/sparc64/kernel/pci_iommu.c +++ b/arch/sparc64/kernel/pci_iommu.c @@ -8,6 +8,7 @@ #include <linux/kernel.h> #include <linux/sched.h> #include <linux/mm.h> +#include <linux/delay.h> #include <asm/pbm.h> @@ -195,6 +196,34 @@ static iopte_t *alloc_consistent_cluster(struct pci_iommu *iommu, unsigned long return NULL; } +static int iommu_alloc_ctx(struct pci_iommu *iommu) +{ + int lowest = iommu->ctx_lowest_free; + int sz = IOMMU_NUM_CTXS - lowest; + int n = find_next_zero_bit(iommu->ctx_bitmap, sz, lowest); + + if (unlikely(n == sz)) { + n = find_next_zero_bit(iommu->ctx_bitmap, lowest, 1); + if (unlikely(n == lowest)) { + printk(KERN_WARNING "IOMMU: Ran out of contexts.\n"); + n = 0; + } + } + if (n) + __set_bit(n, iommu->ctx_bitmap); + + return n; +} + +static inline void iommu_free_ctx(struct pci_iommu *iommu, int ctx) +{ + if (likely(ctx)) { + __clear_bit(ctx, iommu->ctx_bitmap); + if (ctx < iommu->ctx_lowest_free) + iommu->ctx_lowest_free = ctx; + } +} + /* Allocate and map kernel buffer of size SIZE using consistent mode * DMA for PCI device PDEV. Return non-NULL cpu-side address if * successful and set *DMA_ADDRP to the PCI side dma address. @@ -235,7 +264,7 @@ void *pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_ad npages = size >> IO_PAGE_SHIFT; ctx = 0; if (iommu->iommu_ctxflush) - ctx = iommu->iommu_cur_ctx++; + ctx = iommu_alloc_ctx(iommu); first_page = __pa(first_page); while (npages--) { iopte_val(*iopte) = (IOPTE_CONSISTENT(ctx) | @@ -316,6 +345,8 @@ void pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu, dma_addr_ } } + iommu_free_ctx(iommu, ctx); + spin_unlock_irqrestore(&iommu->lock, flags); order = get_order(size); @@ -359,7 +390,7 @@ dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr, size_t sz, int direct base_paddr = __pa(oaddr & IO_PAGE_MASK); ctx = 0; if (iommu->iommu_ctxflush) - ctx = iommu->iommu_cur_ctx++; + ctx = iommu_alloc_ctx(iommu); if (strbuf->strbuf_enabled) iopte_protection = IOPTE_STREAMING(ctx); else @@ -379,6 +410,70 @@ bad: return PCI_DMA_ERROR_CODE; } +static void pci_strbuf_flush(struct pci_strbuf *strbuf, struct pci_iommu *iommu, u32 vaddr, unsigned long ctx, unsigned long npages, int direction) +{ + int limit; + + if (strbuf->strbuf_ctxflush && + iommu->iommu_ctxflush) { + unsigned long matchreg, flushreg; + u64 val; + + flushreg = strbuf->strbuf_ctxflush; + matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx); + + pci_iommu_write(flushreg, ctx); + val = pci_iommu_read(matchreg); + val &= 0xffff; + if (!val) + goto do_flush_sync; + + while (val) { + if (val & 0x1) + pci_iommu_write(flushreg, ctx); + val >>= 1; + } + val = pci_iommu_read(matchreg); + if (unlikely(val)) { + printk(KERN_WARNING "pci_strbuf_flush: ctx flush " + "timeout matchreg[%lx] ctx[%lx]\n", + val, ctx); + goto do_page_flush; + } + } else { + unsigned long i; + + do_page_flush: + for (i = 0; i < npages; i++, vaddr += IO_PAGE_SIZE) + pci_iommu_write(strbuf->strbuf_pflush, vaddr); + } + +do_flush_sync: + /* If the device could not have possibly put dirty data into + * the streaming cache, no flush-flag synchronization needs + * to be performed. + */ + if (direction == PCI_DMA_TODEVICE) + return; + + PCI_STC_FLUSHFLAG_INIT(strbuf); + pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa); + (void) pci_iommu_read(iommu->write_complete_reg); + + limit = 100000; + while (!PCI_STC_FLUSHFLAG_SET(strbuf)) { + limit--; + if (!limit) + break; + udelay(1); + membar("#LoadLoad"); + } + if (!limit) + printk(KERN_WARNING "pci_strbuf_flush: flushflag timeout " + "vaddr[%08x] ctx[%lx] npages[%ld]\n", + vaddr, ctx, npages); +} + /* Unmap a single streaming mode DMA translation. */ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int direction) { @@ -386,7 +481,7 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int struct pci_iommu *iommu; struct pci_strbuf *strbuf; iopte_t *base; - unsigned long flags, npages, i, ctx; + unsigned long flags, npages, ctx; if (direction == PCI_DMA_NONE) BUG(); @@ -414,29 +509,8 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int ctx = (iopte_val(*base) & IOPTE_CONTEXT) >> 47UL; /* Step 1: Kick data out of streaming buffers if necessary. */ - if (strbuf->strbuf_enabled) { - u32 vaddr = bus_addr; - - PCI_STC_FLUSHFLAG_INIT(strbuf); - if (strbuf->strbuf_ctxflush && - iommu->iommu_ctxflush) { - unsigned long matchreg, flushreg; - - flushreg = strbuf->strbuf_ctxflush; - matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx); - do { - pci_iommu_write(flushreg, ctx); - } while(((long)pci_iommu_read(matchreg)) < 0L); - } else { - for (i = 0; i < npages; i++, vaddr += IO_PAGE_SIZE) - pci_iommu_write(strbuf->strbuf_pflush, vaddr); - } - - pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa); - (void) pci_iommu_read(iommu->write_complete_reg); - while (!PCI_STC_FLUSHFLAG_SET(strbuf)) - membar("#LoadLoad"); - } + if (strbuf->strbuf_enabled) + pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction); /* Step 2: Clear out first TSB entry. */ iopte_make_dummy(iommu, base); @@ -444,6 +518,8 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int free_streaming_cluster(iommu, bus_addr - iommu->page_table_map_base, npages, ctx); + iommu_free_ctx(iommu, ctx); + spin_unlock_irqrestore(&iommu->lock, flags); } @@ -583,7 +659,7 @@ int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int /* Step 4: Choose a context if necessary. */ ctx = 0; if (iommu->iommu_ctxflush) - ctx = iommu->iommu_cur_ctx++; + ctx = iommu_alloc_ctx(iommu); /* Step 5: Create the mappings. */ if (strbuf->strbuf_enabled) @@ -647,29 +723,8 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, ctx = (iopte_val(*base) & IOPTE_CONTEXT) >> 47UL; /* Step 1: Kick data out of streaming buffers if necessary. */ - if (strbuf->strbuf_enabled) { - u32 vaddr = (u32) bus_addr; - - PCI_STC_FLUSHFLAG_INIT(strbuf); - if (strbuf->strbuf_ctxflush && - iommu->iommu_ctxflush) { - unsigned long matchreg, flushreg; - - flushreg = strbuf->strbuf_ctxflush; - matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx); - do { - pci_iommu_write(flushreg, ctx); - } while(((long)pci_iommu_read(matchreg)) < 0L); - } else { - for (i = 0; i < npages; i++, vaddr += IO_PAGE_SIZE) - pci_iommu_write(strbuf->strbuf_pflush, vaddr); - } - - pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa); - (void) pci_iommu_read(iommu->write_complete_reg); - while (!PCI_STC_FLUSHFLAG_SET(strbuf)) - membar("#LoadLoad"); - } + if (strbuf->strbuf_enabled) + pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction); /* Step 2: Clear out first TSB entry. */ iopte_make_dummy(iommu, base); @@ -677,6 +732,8 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, free_streaming_cluster(iommu, bus_addr - iommu->page_table_map_base, npages, ctx); + iommu_free_ctx(iommu, ctx); + spin_unlock_irqrestore(&iommu->lock, flags); } @@ -715,28 +772,7 @@ void pci_dma_sync_single_for_cpu(struct pci_dev *pdev, dma_addr_t bus_addr, size } /* Step 2: Kick data out of streaming buffers. */ - PCI_STC_FLUSHFLAG_INIT(strbuf); - if (iommu->iommu_ctxflush && - strbuf->strbuf_ctxflush) { - unsigned long matchreg, flushreg; - - flushreg = strbuf->strbuf_ctxflush; - matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx); - do { - pci_iommu_write(flushreg, ctx); - } while(((long)pci_iommu_read(matchreg)) < 0L); - } else { - unsigned long i; - - for (i = 0; i < npages; i++, bus_addr += IO_PAGE_SIZE) - pci_iommu_write(strbuf->strbuf_pflush, bus_addr); - } - - /* Step 3: Perform flush synchronization sequence. */ - pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa); - (void) pci_iommu_read(iommu->write_complete_reg); - while (!PCI_STC_FLUSHFLAG_SET(strbuf)) - membar("#LoadLoad"); + pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction); spin_unlock_irqrestore(&iommu->lock, flags); } @@ -749,7 +785,8 @@ void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev, struct scatterlist *sglist, i struct pcidev_cookie *pcp; struct pci_iommu *iommu; struct pci_strbuf *strbuf; - unsigned long flags, ctx; + unsigned long flags, ctx, npages, i; + u32 bus_addr; pcp = pdev->sysdata; iommu = pcp->pbm->iommu; @@ -772,36 +809,14 @@ void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev, struct scatterlist *sglist, i } /* Step 2: Kick data out of streaming buffers. */ - PCI_STC_FLUSHFLAG_INIT(strbuf); - if (iommu->iommu_ctxflush && - strbuf->strbuf_ctxflush) { - unsigned long matchreg, flushreg; - - flushreg = strbuf->strbuf_ctxflush; - matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx); - do { - pci_iommu_write(flushreg, ctx); - } while (((long)pci_iommu_read(matchreg)) < 0L); - } else { - unsigned long i, npages; - u32 bus_addr; - - bus_addr = sglist[0].dma_address & IO_PAGE_MASK; - - for(i = 1; i < nelems; i++) - if (!sglist[i].dma_length) - break; - i--; - npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length) - bus_addr) >> IO_PAGE_SHIFT; - for (i = 0; i < npages; i++, bus_addr += IO_PAGE_SIZE) - pci_iommu_write(strbuf->strbuf_pflush, bus_addr); - } - - /* Step 3: Perform flush synchronization sequence. */ - pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa); - (void) pci_iommu_read(iommu->write_complete_reg); - while (!PCI_STC_FLUSHFLAG_SET(strbuf)) - membar("#LoadLoad"); + bus_addr = sglist[0].dma_address & IO_PAGE_MASK; + for(i = 1; i < nelems; i++) + if (!sglist[i].dma_length) + break; + i--; + npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length) + - bus_addr) >> IO_PAGE_SHIFT; + pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction); spin_unlock_irqrestore(&iommu->lock, flags); } diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c index 3567fa879e1..534320ef0db 100644 --- a/arch/sparc64/kernel/pci_psycho.c +++ b/arch/sparc64/kernel/pci_psycho.c @@ -1212,7 +1212,7 @@ static void __init psycho_iommu_init(struct pci_controller_info *p) /* Setup initial software IOMMU state. */ spin_lock_init(&iommu->lock); - iommu->iommu_cur_ctx = 0; + iommu->ctx_lowest_free = 1; /* Register addresses. */ iommu->iommu_control = p->pbm_A.controller_regs + PSYCHO_IOMMU_CONTROL; diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c index 5525d1ec4af..53d333b4a4e 100644 --- a/arch/sparc64/kernel/pci_sabre.c +++ b/arch/sparc64/kernel/pci_sabre.c @@ -1265,7 +1265,7 @@ static void __init sabre_iommu_init(struct pci_controller_info *p, /* Setup initial software IOMMU state. */ spin_lock_init(&iommu->lock); - iommu->iommu_cur_ctx = 0; + iommu->ctx_lowest_free = 1; /* Register addresses. */ iommu->iommu_control = p->pbm_A.controller_regs + SABRE_IOMMU_CONTROL; diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c index e93fcadc372..5753175b94e 100644 --- a/arch/sparc64/kernel/pci_schizo.c +++ b/arch/sparc64/kernel/pci_schizo.c @@ -1753,7 +1753,7 @@ static void schizo_pbm_iommu_init(struct pci_pbm_info *pbm) /* Setup initial software IOMMU state. */ spin_lock_init(&iommu->lock); - iommu->iommu_cur_ctx = 0; + iommu->ctx_lowest_free = 1; /* Register addresses, SCHIZO has iommu ctx flushing. */ iommu->iommu_control = pbm->pbm_regs + SCHIZO_IOMMU_CONTROL; diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c index 14d9c3a21b9..89f5e019f24 100644 --- a/arch/sparc64/kernel/sbus.c +++ b/arch/sparc64/kernel/sbus.c @@ -117,19 +117,42 @@ static void iommu_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages #define STRBUF_TAG_VALID 0x02UL -static void strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages) +static void sbus_strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages, int direction) { - iommu->strbuf_flushflag = 0UL; - while (npages--) - upa_writeq(base + (npages << IO_PAGE_SHIFT), + unsigned long n; + int limit; + + n = npages; + while (n--) + upa_writeq(base + (n << IO_PAGE_SHIFT), iommu->strbuf_regs + STRBUF_PFLUSH); + /* If the device could not have possibly put dirty data into + * the streaming cache, no flush-flag synchronization needs + * to be performed. + */ + if (direction == SBUS_DMA_TODEVICE) + return; + + iommu->strbuf_flushflag = 0UL; + /* Whoopee cushion! */ upa_writeq(__pa(&iommu->strbuf_flushflag), iommu->strbuf_regs + STRBUF_FSYNC); upa_readq(iommu->sbus_control_reg); - while (iommu->strbuf_flushflag == 0UL) + + limit = 100000; + while (iommu->strbuf_flushflag == 0UL) { + limit--; + if (!limit) + break; + udelay(1); membar("#LoadLoad"); + } + if (!limit) + printk(KERN_WARNING "sbus_strbuf_flush: flushflag timeout " + "vaddr[%08x] npages[%ld]\n", + base, npages); } static iopte_t *alloc_streaming_cluster(struct sbus_iommu *iommu, unsigned long npages) @@ -406,7 +429,7 @@ void sbus_unmap_single(struct sbus_dev *sdev, dma_addr_t dma_addr, size_t size, spin_lock_irqsave(&iommu->lock, flags); free_streaming_cluster(iommu, dma_base, size >> IO_PAGE_SHIFT); - strbuf_flush(iommu, dma_base, size >> IO_PAGE_SHIFT); + sbus_strbuf_flush(iommu, dma_base, size >> IO_PAGE_SHIFT, direction); spin_unlock_irqrestore(&iommu->lock, flags); } @@ -569,7 +592,7 @@ void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg, int nents, int iommu = sdev->bus->iommu; spin_lock_irqsave(&iommu->lock, flags); free_streaming_cluster(iommu, dvma_base, size >> IO_PAGE_SHIFT); - strbuf_flush(iommu, dvma_base, size >> IO_PAGE_SHIFT); + sbus_strbuf_flush(iommu, dvma_base, size >> IO_PAGE_SHIFT, direction); spin_unlock_irqrestore(&iommu->lock, flags); } @@ -581,7 +604,7 @@ void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, dma_addr_t base, size_t size = (IO_PAGE_ALIGN(base + size) - (base & IO_PAGE_MASK)); spin_lock_irqsave(&iommu->lock, flags); - strbuf_flush(iommu, base & IO_PAGE_MASK, size >> IO_PAGE_SHIFT); + sbus_strbuf_flush(iommu, base & IO_PAGE_MASK, size >> IO_PAGE_SHIFT, direction); spin_unlock_irqrestore(&iommu->lock, flags); } @@ -605,7 +628,7 @@ void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, struct scatterlist *sg, int size = IO_PAGE_ALIGN(sg[i].dma_address + sg[i].dma_length) - base; spin_lock_irqsave(&iommu->lock, flags); - strbuf_flush(iommu, base, size >> IO_PAGE_SHIFT); + sbus_strbuf_flush(iommu, base, size >> IO_PAGE_SHIFT, direction); spin_unlock_irqrestore(&iommu->lock, flags); } diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 12c3d84b746..b7e6a91952b 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -383,6 +383,17 @@ static void __init process_switch(char c) /* Use PROM debug console. */ register_console(&prom_debug_console); break; + case 'P': + /* Force UltraSPARC-III P-Cache on. */ + if (tlb_type != cheetah) { + printk("BOOT: Ignoring P-Cache force option.\n"); + break; + } + cheetah_pcache_forced_on = 1; + add_taint(TAINT_MACHINE_CHECK); + cheetah_enable_pcache(); + break; + default: printk("Unknown boot switch (-%c)\n", c); break; diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 6dff06a44e7..e5b9c7a2778 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -123,6 +123,9 @@ void __init smp_callin(void) smp_setup_percpu_timer(); + if (cheetah_pcache_forced_on) + cheetah_enable_pcache(); + local_irq_enable(); calibrate_delay(); diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 56b203a2af6..a9f4596d7c2 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -421,6 +421,25 @@ asmlinkage void cee_log(unsigned long ce_status, } } +int cheetah_pcache_forced_on; + +void cheetah_enable_pcache(void) +{ + unsigned long dcr; + + printk("CHEETAH: Enabling P-Cache on cpu %d.\n", + smp_processor_id()); + + __asm__ __volatile__("ldxa [%%g0] %1, %0" + : "=r" (dcr) + : "i" (ASI_DCU_CONTROL_REG)); + dcr |= (DCU_PE | DCU_HPE | DCU_SPE | DCU_SL); + __asm__ __volatile__("stxa %0, [%%g0] %1\n\t" + "membar #Sync" + : /* no outputs */ + : "r" (dcr), "i" (ASI_DCU_CONTROL_REG)); +} + /* Cheetah error trap handling. */ static unsigned long ecache_flush_physbase; static unsigned long ecache_flush_linesize; diff --git a/arch/um/Kconfig.debug b/arch/um/Kconfig.debug index b89989de364..bd41e4286d0 100644 --- a/arch/um/Kconfig.debug +++ b/arch/um/Kconfig.debug @@ -2,10 +2,6 @@ menu "Kernel hacking" source "lib/Kconfig.debug" -config FRAME_POINTER - bool - default y if DEBUG_INFO - config PT_PROXY bool "Enable ptrace proxy" depends on XTERM_CHAN && DEBUG_INFO && MODE_TT diff --git a/arch/um/Kconfig_x86_64 b/arch/um/Kconfig_x86_64 index fd8d7e8982b..f162f50f0b1 100644 --- a/arch/um/Kconfig_x86_64 +++ b/arch/um/Kconfig_x86_64 @@ -6,6 +6,10 @@ config 64BIT bool default y +config TOP_ADDR + hex + default 0x80000000 + config 3_LEVEL_PGTABLES bool default y diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c index 0150038af79..14a12d6b3df 100644 --- a/arch/um/drivers/chan_kern.c +++ b/arch/um/drivers/chan_kern.c @@ -20,9 +20,17 @@ #include "os.h" #ifdef CONFIG_NOCONFIG_CHAN + +/* The printk's here are wrong because we are complaining that there is no + * output device, but printk is printing to that output device. The user will + * never see the error. printf would be better, except it can't run on a + * kernel stack because it will overflow it. + * Use printk for now since that will avoid crashing. + */ + static void *not_configged_init(char *str, int device, struct chan_opts *opts) { - printf(KERN_ERR "Using a channel type which is configured out of " + printk(KERN_ERR "Using a channel type which is configured out of " "UML\n"); return(NULL); } @@ -30,27 +38,27 @@ static void *not_configged_init(char *str, int device, struct chan_opts *opts) static int not_configged_open(int input, int output, int primary, void *data, char **dev_out) { - printf(KERN_ERR "Using a channel type which is configured out of " + printk(KERN_ERR "Using a channel type which is configured out of " "UML\n"); return(-ENODEV); } static void not_configged_close(int fd, void *data) { - printf(KERN_ERR "Using a channel type which is configured out of " + printk(KERN_ERR "Using a channel type which is configured out of " "UML\n"); } static int not_configged_read(int fd, char *c_out, void *data) { - printf(KERN_ERR "Using a channel type which is configured out of " + printk(KERN_ERR "Using a channel type which is configured out of " "UML\n"); return(-EIO); } static int not_configged_write(int fd, const char *buf, int len, void *data) { - printf(KERN_ERR "Using a channel type which is configured out of " + printk(KERN_ERR "Using a channel type which is configured out of " "UML\n"); return(-EIO); } @@ -58,7 +66,7 @@ static int not_configged_write(int fd, const char *buf, int len, void *data) static int not_configged_console_write(int fd, const char *buf, int len, void *data) { - printf(KERN_ERR "Using a channel type which is configured out of " + printk(KERN_ERR "Using a channel type which is configured out of " "UML\n"); return(-EIO); } @@ -66,7 +74,7 @@ static int not_configged_console_write(int fd, const char *buf, int len, static int not_configged_window_size(int fd, void *data, unsigned short *rows, unsigned short *cols) { - printf(KERN_ERR "Using a channel type which is configured out of " + printk(KERN_ERR "Using a channel type which is configured out of " "UML\n"); return(-ENODEV); } diff --git a/arch/um/drivers/mcast_kern.c b/arch/um/drivers/mcast_kern.c index faf714e87b5..217438cdef3 100644 --- a/arch/um/drivers/mcast_kern.c +++ b/arch/um/drivers/mcast_kern.c @@ -73,7 +73,6 @@ int mcast_setup(char *str, char **mac_out, void *data) struct mcast_init *init = data; char *port_str = NULL, *ttl_str = NULL, *remain; char *last; - int n; *init = ((struct mcast_init) { .addr = "239.192.168.1", @@ -89,13 +88,12 @@ int mcast_setup(char *str, char **mac_out, void *data) } if(port_str != NULL){ - n = simple_strtoul(port_str, &last, 10); + init->port = simple_strtoul(port_str, &last, 10); if((*last != '\0') || (last == port_str)){ printk(KERN_ERR "mcast_setup - Bad port : '%s'\n", port_str); return(0); } - init->port = htons(n); } if(ttl_str != NULL){ diff --git a/arch/um/drivers/mcast_user.c b/arch/um/drivers/mcast_user.c index 0fe1d9fa913..7a0d115b29d 100644 --- a/arch/um/drivers/mcast_user.c +++ b/arch/um/drivers/mcast_user.c @@ -38,7 +38,7 @@ static struct sockaddr_in *new_addr(char *addr, unsigned short port) } sin->sin_family = AF_INET; sin->sin_addr.s_addr = in_aton(addr); - sin->sin_port = port; + sin->sin_port = htons(port); return(sin); } @@ -55,28 +55,25 @@ static int mcast_open(void *data) struct mcast_data *pri = data; struct sockaddr_in *sin = pri->mcast_addr; struct ip_mreq mreq; - int fd, yes = 1; + int fd = -EINVAL, yes = 1, err = -EINVAL;; - if ((sin->sin_addr.s_addr == 0) || (sin->sin_port == 0)) { - fd = -EINVAL; + if ((sin->sin_addr.s_addr == 0) || (sin->sin_port == 0)) goto out; - } fd = socket(AF_INET, SOCK_DGRAM, 0); + if (fd < 0){ printk("mcast_open : data socket failed, errno = %d\n", errno); - fd = -ENOMEM; + fd = -errno; goto out; } if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &yes, sizeof(yes)) < 0) { printk("mcast_open: SO_REUSEADDR failed, errno = %d\n", errno); - os_close_file(fd); - fd = -EINVAL; - goto out; + goto out_close; } /* set ttl according to config */ @@ -84,26 +81,20 @@ static int mcast_open(void *data) sizeof(pri->ttl)) < 0) { printk("mcast_open: IP_MULTICAST_TTL failed, error = %d\n", errno); - os_close_file(fd); - fd = -EINVAL; - goto out; + goto out_close; } /* set LOOP, so data does get fed back to local sockets */ if (setsockopt(fd, SOL_IP, IP_MULTICAST_LOOP, &yes, sizeof(yes)) < 0) { printk("mcast_open: IP_MULTICAST_LOOP failed, error = %d\n", errno); - os_close_file(fd); - fd = -EINVAL; - goto out; + goto out_close; } /* bind socket to mcast address */ if (bind(fd, (struct sockaddr *) sin, sizeof(*sin)) < 0) { printk("mcast_open : data bind failed, errno = %d\n", errno); - os_close_file(fd); - fd = -EINVAL; - goto out; + goto out_close; } /* subscribe to the multicast group */ @@ -117,12 +108,15 @@ static int mcast_open(void *data) "interface on the host.\n"); printk("eth0 should be configured in order to use the " "multicast transport.\n"); - os_close_file(fd); - fd = -EINVAL; + goto out_close; } out: - return(fd); + return fd; + + out_close: + os_close_file(fd); + return err; } static void mcast_close(int fd, void *data) @@ -164,14 +158,3 @@ struct net_user_info mcast_user_info = { .delete_address = NULL, .max_packet = MAX_PACKET - ETH_HEADER_OTHER }; - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c index d43e9fab05a..f9e22198e01 100644 --- a/arch/um/drivers/random.c +++ b/arch/um/drivers/random.c @@ -1,5 +1,10 @@ -/* Much of this ripped from hw_random.c */ - +/* Copyright (C) 2005 Jeff Dike <jdike@addtoit.com> */ +/* Much of this ripped from drivers/char/hw_random.c, see there for other + * copyright. + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by reference. + */ #include <linux/module.h> #include <linux/fs.h> #include <linux/miscdevice.h> @@ -12,8 +17,6 @@ */ #define RNG_VERSION "1.0.0" #define RNG_MODULE_NAME "random" -#define RNG_DRIVER_NAME RNG_MODULE_NAME " virtual driver " RNG_VERSION -#define PFX RNG_MODULE_NAME ": " #define RNG_MISCDEV_MINOR 183 /* official */ @@ -98,7 +101,7 @@ static int __init rng_init (void) err = misc_register (&rng_miscdev); if (err) { - printk (KERN_ERR PFX "misc device register failed\n"); + printk (KERN_ERR RNG_MODULE_NAME ": misc device register failed\n"); goto err_out_cleanup_hw; } @@ -120,3 +123,6 @@ static void __exit rng_cleanup (void) module_init (rng_init); module_exit (rng_cleanup); + +MODULE_DESCRIPTION("UML Host Random Number Generator (RNG) driver"); +MODULE_LICENSE("GPL"); diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c index a2bac429f3d..b32a77010fb 100644 --- a/arch/um/drivers/ssl.c +++ b/arch/um/drivers/ssl.c @@ -22,7 +22,6 @@ #include "init.h" #include "irq_user.h" #include "mconsole_kern.h" -#include "2_5compat.h" static int ssl_version = 1; diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c index 361d0be342b..afbe1e71ed8 100644 --- a/arch/um/drivers/stdio_console.c +++ b/arch/um/drivers/stdio_console.c @@ -28,7 +28,6 @@ #include "irq_user.h" #include "mconsole_kern.h" #include "init.h" -#include "2_5compat.h" #define MAX_TTYS (16) diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 9a56ff94308..2a7f6892c55 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -49,13 +49,12 @@ #include "irq_user.h" #include "irq_kern.h" #include "ubd_user.h" -#include "2_5compat.h" #include "os.h" #include "mem.h" #include "mem_kern.h" #include "cow.h" -enum ubd_req { UBD_READ, UBD_WRITE, UBD_MMAP }; +enum ubd_req { UBD_READ, UBD_WRITE }; struct io_thread_req { enum ubd_req op; @@ -68,8 +67,6 @@ struct io_thread_req { unsigned long sector_mask; unsigned long long cow_offset; unsigned long bitmap_words[2]; - int map_fd; - unsigned long long map_offset; int error; }; @@ -122,10 +119,6 @@ static int ubd_ioctl(struct inode * inode, struct file * file, #define MAX_DEV (8) -/* Changed in early boot */ -static int ubd_do_mmap = 0; -#define UBD_MMAP_BLOCK_SIZE PAGE_SIZE - static struct block_device_operations ubd_blops = { .owner = THIS_MODULE, .open = ubd_open, @@ -175,12 +168,6 @@ struct ubd { int no_cow; struct cow cow; struct platform_device pdev; - - int map_writes; - int map_reads; - int nomap_writes; - int nomap_reads; - int write_maps; }; #define DEFAULT_COW { \ @@ -200,11 +187,6 @@ struct ubd { .openflags = OPEN_FLAGS, \ .no_cow = 0, \ .cow = DEFAULT_COW, \ - .map_writes = 0, \ - .map_reads = 0, \ - .nomap_writes = 0, \ - .nomap_reads = 0, \ - .write_maps = 0, \ } struct ubd ubd_dev[MAX_DEV] = { [ 0 ... MAX_DEV - 1 ] = DEFAULT_UBD }; @@ -314,13 +296,6 @@ static int ubd_setup_common(char *str, int *index_out) int major; str++; - if(!strcmp(str, "mmap")){ - CHOOSE_MODE(printk("mmap not supported by the ubd " - "driver in tt mode\n"), - ubd_do_mmap = 1); - return(0); - } - if(!strcmp(str, "sync")){ global_openflags = of_sync(global_openflags); return(0); @@ -464,9 +439,9 @@ static int udb_setup(char *str) __setup("udb", udb_setup); __uml_help(udb_setup, "udb\n" -" This option is here solely to catch ubd -> udb typos, which can be\n\n" -" to impossible to catch visually unless you specifically look for\n\n" -" them. The only result of any option starting with 'udb' is an error\n\n" +" This option is here solely to catch ubd -> udb typos, which can be\n" +" to impossible to catch visually unless you specifically look for\n" +" them. The only result of any option starting with 'udb' is an error\n" " in the boot output.\n\n" ); @@ -524,7 +499,7 @@ static void ubd_handler(void) { struct io_thread_req req; struct request *rq = elv_next_request(ubd_queue); - int n, err; + int n; do_ubd = NULL; intr_count++; @@ -538,19 +513,6 @@ static void ubd_handler(void) return; } - if((req.op != UBD_MMAP) && - ((req.offset != ((__u64) (rq->sector)) << 9) || - (req.length != (rq->current_nr_sectors) << 9))) - panic("I/O op mismatch"); - - if(req.map_fd != -1){ - err = physmem_subst_mapping(req.buffer, req.map_fd, - req.map_offset, 1); - if(err) - printk("ubd_handler - physmem_subst_mapping failed, " - "err = %d\n", -err); - } - ubd_finish(rq, req.error); reactivate_fd(thread_fd, UBD_IRQ); do_ubd_request(ubd_queue); @@ -583,14 +545,10 @@ static int ubd_file_size(struct ubd *dev, __u64 *size_out) static void ubd_close(struct ubd *dev) { - if(ubd_do_mmap) - physmem_forget_descriptor(dev->fd); os_close_file(dev->fd); if(dev->cow.file == NULL) return; - if(ubd_do_mmap) - physmem_forget_descriptor(dev->cow.fd); os_close_file(dev->cow.fd); vfree(dev->cow.bitmap); dev->cow.bitmap = NULL; @@ -1010,94 +968,13 @@ static void cowify_req(struct io_thread_req *req, unsigned long *bitmap, req->bitmap_words, bitmap_len); } -static int mmap_fd(struct request *req, struct ubd *dev, __u64 offset) -{ - __u64 sector; - unsigned char *bitmap; - int bit, i; - - /* mmap must have been requested on the command line */ - if(!ubd_do_mmap) - return(-1); - - /* The buffer must be page aligned */ - if(((unsigned long) req->buffer % UBD_MMAP_BLOCK_SIZE) != 0) - return(-1); - - /* The request must be a page long */ - if((req->current_nr_sectors << 9) != PAGE_SIZE) - return(-1); - - if(dev->cow.file == NULL) - return(dev->fd); - - sector = offset >> 9; - bitmap = (unsigned char *) dev->cow.bitmap; - bit = ubd_test_bit(sector, bitmap); - - for(i = 1; i < req->current_nr_sectors; i++){ - if(ubd_test_bit(sector + i, bitmap) != bit) - return(-1); - } - - if(bit || (rq_data_dir(req) == WRITE)) - offset += dev->cow.data_offset; - - /* The data on disk must be page aligned */ - if((offset % UBD_MMAP_BLOCK_SIZE) != 0) - return(-1); - - return(bit ? dev->fd : dev->cow.fd); -} - -static int prepare_mmap_request(struct ubd *dev, int fd, __u64 offset, - struct request *req, - struct io_thread_req *io_req) -{ - int err; - - if(rq_data_dir(req) == WRITE){ - /* Writes are almost no-ops since the new data is already in the - * host page cache - */ - dev->map_writes++; - if(dev->cow.file != NULL) - cowify_bitmap(io_req->offset, io_req->length, - &io_req->sector_mask, &io_req->cow_offset, - dev->cow.bitmap, dev->cow.bitmap_offset, - io_req->bitmap_words, - dev->cow.bitmap_len); - } - else { - int w; - - if((dev->cow.file != NULL) && (fd == dev->cow.fd)) - w = 0; - else w = dev->openflags.w; - - if((dev->cow.file != NULL) && (fd == dev->fd)) - offset += dev->cow.data_offset; - - err = physmem_subst_mapping(req->buffer, fd, offset, w); - if(err){ - printk("physmem_subst_mapping failed, err = %d\n", - -err); - return(1); - } - dev->map_reads++; - } - io_req->op = UBD_MMAP; - io_req->buffer = req->buffer; - return(0); -} - /* Called with ubd_io_lock held */ static int prepare_request(struct request *req, struct io_thread_req *io_req) { struct gendisk *disk = req->rq_disk; struct ubd *dev = disk->private_data; __u64 offset; - int len, fd; + int len; if(req->rq_status == RQ_INACTIVE) return(1); @@ -1114,34 +991,12 @@ static int prepare_request(struct request *req, struct io_thread_req *io_req) io_req->fds[0] = (dev->cow.file != NULL) ? dev->cow.fd : dev->fd; io_req->fds[1] = dev->fd; - io_req->map_fd = -1; io_req->cow_offset = -1; io_req->offset = offset; io_req->length = len; io_req->error = 0; io_req->sector_mask = 0; - fd = mmap_fd(req, dev, io_req->offset); - if(fd > 0){ - /* If mmapping is otherwise OK, but the first access to the - * page is a write, then it's not mapped in yet. So we have - * to write the data to disk first, then we can map the disk - * page in and continue normally from there. - */ - if((rq_data_dir(req) == WRITE) && !is_remapped(req->buffer)){ - io_req->map_fd = dev->fd; - io_req->map_offset = io_req->offset + - dev->cow.data_offset; - dev->write_maps++; - } - else return(prepare_mmap_request(dev, fd, io_req->offset, req, - io_req)); - } - - if(rq_data_dir(req) == READ) - dev->nomap_reads++; - else dev->nomap_writes++; - io_req->op = (rq_data_dir(req) == READ) ? UBD_READ : UBD_WRITE; io_req->offsets[0] = 0; io_req->offsets[1] = dev->cow.data_offset; @@ -1229,143 +1084,6 @@ static int ubd_ioctl(struct inode * inode, struct file * file, return(-EINVAL); } -static int ubd_check_remapped(int fd, unsigned long address, int is_write, - __u64 offset) -{ - __u64 bitmap_offset; - unsigned long new_bitmap[2]; - int i, err, n; - - /* If it's not a write access, we can't do anything about it */ - if(!is_write) - return(0); - - /* We have a write */ - for(i = 0; i < sizeof(ubd_dev) / sizeof(ubd_dev[0]); i++){ - struct ubd *dev = &ubd_dev[i]; - - if((dev->fd != fd) && (dev->cow.fd != fd)) - continue; - - /* It's a write to a ubd device */ - - /* This should be impossible now */ - if(!dev->openflags.w){ - /* It's a write access on a read-only device - probably - * shouldn't happen. If the kernel is trying to change - * something with no intention of writing it back out, - * then this message will clue us in that this needs - * fixing - */ - printk("Write access to mapped page from readonly ubd " - "device %d\n", i); - return(0); - } - - /* It's a write to a writeable ubd device - it must be COWed - * because, otherwise, the page would have been mapped in - * writeable - */ - - if(!dev->cow.file) - panic("Write fault on writeable non-COW ubd device %d", - i); - - /* It should also be an access to the backing file since the - * COW pages should be mapped in read-write - */ - - if(fd == dev->fd) - panic("Write fault on a backing page of ubd " - "device %d\n", i); - - /* So, we do the write, copying the backing data to the COW - * file... - */ - - err = os_seek_file(dev->fd, offset + dev->cow.data_offset); - if(err < 0) - panic("Couldn't seek to %lld in COW file of ubd " - "device %d, err = %d", - offset + dev->cow.data_offset, i, -err); - - n = os_write_file(dev->fd, (void *) address, PAGE_SIZE); - if(n != PAGE_SIZE) - panic("Couldn't copy data to COW file of ubd " - "device %d, err = %d", i, -n); - - /* ... updating the COW bitmap... */ - - cowify_bitmap(offset, PAGE_SIZE, NULL, &bitmap_offset, - dev->cow.bitmap, dev->cow.bitmap_offset, - new_bitmap, dev->cow.bitmap_len); - - err = os_seek_file(dev->fd, bitmap_offset); - if(err < 0) - panic("Couldn't seek to %lld in COW file of ubd " - "device %d, err = %d", bitmap_offset, i, -err); - - n = os_write_file(dev->fd, new_bitmap, sizeof(new_bitmap)); - if(n != sizeof(new_bitmap)) - panic("Couldn't update bitmap of ubd device %d, " - "err = %d", i, -n); - - /* Maybe we can map the COW page in, and maybe we can't. If - * it is a pre-V3 COW file, we can't, since the alignment will - * be wrong. If it is a V3 or later COW file which has been - * moved to a system with a larger page size, then maybe we - * can't, depending on the exact location of the page. - */ - - offset += dev->cow.data_offset; - - /* Remove the remapping, putting the original anonymous page - * back. If the COW file can be mapped in, that is done. - * Otherwise, the COW page is read in. - */ - - if(!physmem_remove_mapping((void *) address)) - panic("Address 0x%lx not remapped by ubd device %d", - address, i); - if((offset % UBD_MMAP_BLOCK_SIZE) == 0) - physmem_subst_mapping((void *) address, dev->fd, - offset, 1); - else { - err = os_seek_file(dev->fd, offset); - if(err < 0) - panic("Couldn't seek to %lld in COW file of " - "ubd device %d, err = %d", offset, i, - -err); - - n = os_read_file(dev->fd, (void *) address, PAGE_SIZE); - if(n != PAGE_SIZE) - panic("Failed to read page from offset %llx of " - "COW file of ubd device %d, err = %d", - offset, i, -n); - } - - return(1); - } - - /* It's not a write on a ubd device */ - return(0); -} - -static struct remapper ubd_remapper = { - .list = LIST_HEAD_INIT(ubd_remapper.list), - .proc = ubd_check_remapped, -}; - -static int ubd_remapper_setup(void) -{ - if(ubd_do_mmap) - register_remapper(&ubd_remapper); - - return(0); -} - -__initcall(ubd_remapper_setup); - static int same_backing_files(char *from_cmdline, char *from_cow, char *cow) { struct uml_stat buf1, buf2; @@ -1568,15 +1286,6 @@ void do_io(struct io_thread_req *req) int err; __u64 off; - if(req->op == UBD_MMAP){ - /* Touch the page to force the host to do any necessary IO to - * get it into memory - */ - n = *((volatile int *) req->buffer); - req->error = update_bitmap(req); - return; - } - nsectors = req->length / req->sectorsize; start = 0; do { diff --git a/arch/um/include/2_5compat.h b/arch/um/include/2_5compat.h deleted file mode 100644 index abdb015a4d7..00000000000 --- a/arch/um/include/2_5compat.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) 2001 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#ifndef __2_5_COMPAT_H__ -#define __2_5_COMPAT_H__ - -#define INIT_HARDSECT(arr, maj, sizes) - -#define SET_PRI(task) do ; while(0) - -#endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/include/sysdep-i386/ptrace.h b/arch/um/include/sysdep-i386/ptrace.h index 84ec7ff5cf8..6eaeb991998 100644 --- a/arch/um/include/sysdep-i386/ptrace.h +++ b/arch/um/include/sysdep-i386/ptrace.h @@ -31,7 +31,6 @@ extern int sysemu_supported; #ifdef UML_CONFIG_MODE_SKAS #include "skas_ptregs.h" -#include "sysdep/faultinfo.h" #define REGS_IP(r) ((r)[HOST_IP]) #define REGS_SP(r) ((r)[HOST_SP]) @@ -59,6 +58,7 @@ extern int sysemu_supported; #define PTRACE_SYSEMU_SINGLESTEP 32 #endif +#include "sysdep/faultinfo.h" #include "choose-mode.h" union uml_pt_regs { diff --git a/arch/um/include/sysdep-x86_64/checksum.h b/arch/um/include/sysdep-x86_64/checksum.h index 572c6c19be3..ea97005af69 100644 --- a/arch/um/include/sysdep-x86_64/checksum.h +++ b/arch/um/include/sysdep-x86_64/checksum.h @@ -9,8 +9,6 @@ #include "linux/in6.h" #include "asm/uaccess.h" -extern unsigned int csum_partial_copy_from(const unsigned char *src, unsigned char *dst, int len, - int sum, int *err_ptr); extern unsigned csum_partial(const unsigned char *buff, unsigned len, unsigned sum); @@ -31,10 +29,15 @@ unsigned int csum_partial_copy_nocheck(const unsigned char *src, unsigned char * } static __inline__ -unsigned int csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst, - int len, int sum, int *err_ptr) +unsigned int csum_partial_copy_from_user(const unsigned char *src, + unsigned char *dst, int len, int sum, + int *err_ptr) { - return csum_partial_copy_from(src, dst, len, sum, err_ptr); + if(copy_from_user(dst, src, len)){ + *err_ptr = -EFAULT; + return(-1); + } + return csum_partial(dst, len, sum); } /** @@ -137,15 +140,6 @@ static inline unsigned add32_with_carry(unsigned a, unsigned b) return a; } -#endif +extern unsigned short ip_compute_csum(unsigned char * buff, int len); -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ +#endif diff --git a/arch/um/include/sysdep-x86_64/ptrace.h b/arch/um/include/sysdep-x86_64/ptrace.h index 348e8fcd513..be8acd5efd9 100644 --- a/arch/um/include/sysdep-x86_64/ptrace.h +++ b/arch/um/include/sysdep-x86_64/ptrace.h @@ -135,6 +135,7 @@ extern int mode_tt; __CHOOSE_MODE(SC_EFLAGS(UPT_SC(r)), REGS_EFLAGS((r)->skas.regs)) #define UPT_SC(r) ((r)->tt.sc) #define UPT_SYSCALL_NR(r) __CHOOSE_MODE((r)->tt.syscall, (r)->skas.syscall) +#define UPT_SYSCALL_RET(r) UPT_RAX(r) extern int user_context(unsigned long sp); @@ -196,32 +197,32 @@ struct syscall_args { #define UPT_SET(regs, reg, val) \ - ({ unsigned long val; \ + ({ unsigned long __upt_val = val; \ switch(reg){ \ - case R8: UPT_R8(regs) = val; break; \ - case R9: UPT_R9(regs) = val; break; \ - case R10: UPT_R10(regs) = val; break; \ - case R11: UPT_R11(regs) = val; break; \ - case R12: UPT_R12(regs) = val; break; \ - case R13: UPT_R13(regs) = val; break; \ - case R14: UPT_R14(regs) = val; break; \ - case R15: UPT_R15(regs) = val; break; \ - case RIP: UPT_IP(regs) = val; break; \ - case RSP: UPT_SP(regs) = val; break; \ - case RAX: UPT_RAX(regs) = val; break; \ - case RBX: UPT_RBX(regs) = val; break; \ - case RCX: UPT_RCX(regs) = val; break; \ - case RDX: UPT_RDX(regs) = val; break; \ - case RSI: UPT_RSI(regs) = val; break; \ - case RDI: UPT_RDI(regs) = val; break; \ - case RBP: UPT_RBP(regs) = val; break; \ - case ORIG_RAX: UPT_ORIG_RAX(regs) = val; break; \ - case CS: UPT_CS(regs) = val; break; \ - case DS: UPT_DS(regs) = val; break; \ - case ES: UPT_ES(regs) = val; break; \ - case FS: UPT_FS(regs) = val; break; \ - case GS: UPT_GS(regs) = val; break; \ - case EFLAGS: UPT_EFLAGS(regs) = val; break; \ + case R8: UPT_R8(regs) = __upt_val; break; \ + case R9: UPT_R9(regs) = __upt_val; break; \ + case R10: UPT_R10(regs) = __upt_val; break; \ + case R11: UPT_R11(regs) = __upt_val; break; \ + case R12: UPT_R12(regs) = __upt_val; break; \ + case R13: UPT_R13(regs) = __upt_val; break; \ + case R14: UPT_R14(regs) = __upt_val; break; \ + case R15: UPT_R15(regs) = __upt_val; break; \ + case RIP: UPT_IP(regs) = __upt_val; break; \ + case RSP: UPT_SP(regs) = __upt_val; break; \ + case RAX: UPT_RAX(regs) = __upt_val; break; \ + case RBX: UPT_RBX(regs) = __upt_val; break; \ + case RCX: UPT_RCX(regs) = __upt_val; break; \ + case RDX: UPT_RDX(regs) = __upt_val; break; \ + case RSI: UPT_RSI(regs) = __upt_val; break; \ + case RDI: UPT_RDI(regs) = __upt_val; break; \ + case RBP: UPT_RBP(regs) = __upt_val; break; \ + case ORIG_RAX: UPT_ORIG_RAX(regs) = __upt_val; break; \ + case CS: UPT_CS(regs) = __upt_val; break; \ + case DS: UPT_DS(regs) = __upt_val; break; \ + case ES: UPT_ES(regs) = __upt_val; break; \ + case FS: UPT_FS(regs) = __upt_val; break; \ + case GS: UPT_GS(regs) = __upt_val; break; \ + case EFLAGS: UPT_EFLAGS(regs) = __upt_val; break; \ default : \ panic("Bad register in UPT_SET : %d\n", reg); \ break; \ @@ -245,14 +246,3 @@ struct syscall_args { CHOOSE_MODE((&(r)->tt.faultinfo), (&(r)->skas.faultinfo)) #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/include/sysrq.h b/arch/um/include/sysrq.h index 2ce9423460b..c8d332b56b9 100644 --- a/arch/um/include/sysrq.h +++ b/arch/um/include/sysrq.h @@ -1,6 +1,7 @@ #ifndef __UM_SYSRQ_H #define __UM_SYSRQ_H -extern void show_trace(unsigned long *stack); +struct task_struct; +extern void show_trace(struct task_struct* task, unsigned long *stack); #endif diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile index 9736ca27c5f..a8918e80df9 100644 --- a/arch/um/kernel/Makefile +++ b/arch/um/kernel/Makefile @@ -14,7 +14,7 @@ obj-y = config.o exec_kern.o exitcode.o \ tlb.o trap_kern.o trap_user.o uaccess_user.o um_arch.o umid.o \ user_util.o -obj-$(CONFIG_BLK_DEV_INITRD) += initrd_kern.o initrd_user.o +obj-$(CONFIG_BLK_DEV_INITRD) += initrd.o obj-$(CONFIG_GPROF) += gprof_syms.o obj-$(CONFIG_GCOV) += gmon_syms.o obj-$(CONFIG_TTY_LOG) += tty_log.o diff --git a/arch/um/kernel/checksum.c b/arch/um/kernel/checksum.c deleted file mode 100644 index e69de29bb2d..00000000000 --- a/arch/um/kernel/checksum.c +++ /dev/null diff --git a/arch/um/kernel/exec_kern.c b/arch/um/kernel/exec_kern.c index 49ddabe69be..efd222ffe20 100644 --- a/arch/um/kernel/exec_kern.c +++ b/arch/um/kernel/exec_kern.c @@ -16,7 +16,6 @@ #include "kern.h" #include "irq_user.h" #include "tlb.h" -#include "2_5compat.h" #include "os.h" #include "time_user.h" #include "choose-mode.h" diff --git a/arch/um/kernel/initrd_kern.c b/arch/um/kernel/initrd.c index fc568af468b..82ecf904b09 100644 --- a/arch/um/kernel/initrd_kern.c +++ b/arch/um/kernel/initrd.c @@ -41,12 +41,31 @@ static int __init uml_initrd_setup(char *line, int *add) return 0; } -__uml_setup("initrd=", uml_initrd_setup, +__uml_setup("initrd=", uml_initrd_setup, "initrd=<initrd image>\n" " This is used to boot UML from an initrd image. The argument is the\n" " name of the file containing the image.\n\n" ); +int load_initrd(char *filename, void *buf, int size) +{ + int fd, n; + + fd = os_open_file(filename, of_read(OPENFLAGS()), 0); + if(fd < 0){ + printk("Opening '%s' failed - err = %d\n", filename, -fd); + return(-1); + } + n = os_read_file(fd, buf, size); + if(n != size){ + printk("Read of %d bytes from '%s' failed, err = %d\n", size, + filename, -n); + return(-1); + } + + os_close_file(fd); + return(0); +} /* * Overrides for Emacs so that we follow Linus's tabbing style. * Emacs will notice this stuff at the end of the file and automatically diff --git a/arch/um/kernel/initrd_user.c b/arch/um/kernel/initrd_user.c deleted file mode 100644 index cb90681e151..00000000000 --- a/arch/um/kernel/initrd_user.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include <unistd.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <errno.h> - -#include "user_util.h" -#include "kern_util.h" -#include "user.h" -#include "initrd.h" -#include "os.h" - -int load_initrd(char *filename, void *buf, int size) -{ - int fd, n; - - fd = os_open_file(filename, of_read(OPENFLAGS()), 0); - if(fd < 0){ - printk("Opening '%s' failed - err = %d\n", filename, -fd); - return(-1); - } - n = os_read_file(fd, buf, size); - if(n != size){ - printk("Read of %d bytes from '%s' failed, err = %d\n", size, - filename, -n); - return(-1); - } - - os_close_file(fd); - return(0); -} - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c index 78d69dc74b2..99439fa15ef 100644 --- a/arch/um/kernel/ksyms.c +++ b/arch/um/kernel/ksyms.c @@ -57,6 +57,7 @@ EXPORT_SYMBOL(copy_to_user_tt); EXPORT_SYMBOL(strncpy_from_user_skas); EXPORT_SYMBOL(copy_to_user_skas); EXPORT_SYMBOL(copy_from_user_skas); +EXPORT_SYMBOL(clear_user_skas); #endif EXPORT_SYMBOL(uml_strdup); diff --git a/arch/um/kernel/main.c b/arch/um/kernel/main.c index a17c49703f9..e42e6364ca1 100644 --- a/arch/um/kernel/main.c +++ b/arch/um/kernel/main.c @@ -71,7 +71,7 @@ static __init void do_uml_initcalls(void) static void last_ditch_exit(int sig) { - CHOOSE_MODE(kmalloc_ok = 0, (void) 0); + kmalloc_ok = 0; signal(SIGINT, SIG_DFL); signal(SIGTERM, SIG_DFL); signal(SIGHUP, SIG_DFL); @@ -87,7 +87,7 @@ int main(int argc, char **argv, char **envp) { char **new_argv; sigset_t mask; - int ret, i; + int ret, i, err; /* Enable all signals except SIGIO - in some environments, we can * enter with some signals blocked @@ -160,27 +160,29 @@ int main(int argc, char **argv, char **envp) */ change_sig(SIGPROF, 0); - /* Reboot */ - if(ret){ - int err; - - printf("\n"); + /* This signal stuff used to be in the reboot case. However, + * sometimes a SIGVTALRM can come in when we're halting (reproducably + * when writing out gcov information, presumably because that takes + * some time) and cause a segfault. + */ - /* stop timers and set SIG*ALRM to be ignored */ - disable_timer(); + /* stop timers and set SIG*ALRM to be ignored */ + disable_timer(); - /* disable SIGIO for the fds and set SIGIO to be ignored */ - err = deactivate_all_fds(); - if(err) - printf("deactivate_all_fds failed, errno = %d\n", - -err); + /* disable SIGIO for the fds and set SIGIO to be ignored */ + err = deactivate_all_fds(); + if(err) + printf("deactivate_all_fds failed, errno = %d\n", -err); - /* Let any pending signals fire now. This ensures - * that they won't be delivered after the exec, when - * they are definitely not expected. - */ - unblock_signals(); + /* Let any pending signals fire now. This ensures + * that they won't be delivered after the exec, when + * they are definitely not expected. + */ + unblock_signals(); + /* Reboot */ + if(ret){ + printf("\n"); execvp(new_argv[0], new_argv); perror("Failed to exec kernel"); ret = 1; diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c index f156661781c..c22825f13e4 100644 --- a/arch/um/kernel/mem.c +++ b/arch/um/kernel/mem.c @@ -100,12 +100,37 @@ void mem_init(void) #endif } +/* + * Create a page table and place a pointer to it in a middle page + * directory entry. + */ +static void __init one_page_table_init(pmd_t *pmd) +{ + if (pmd_none(*pmd)) { + pte_t *pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE); + set_pmd(pmd, __pmd(_KERNPG_TABLE + + (unsigned long) __pa(pte))); + if (pte != pte_offset_kernel(pmd, 0)) + BUG(); + } +} + +static void __init one_md_table_init(pud_t *pud) +{ +#ifdef CONFIG_3_LEVEL_PGTABLES + pmd_t *pmd_table = (pmd_t *) alloc_bootmem_low_pages(PAGE_SIZE); + set_pud(pud, __pud(_KERNPG_TABLE + (unsigned long) __pa(pmd_table))); + if (pmd_table != pmd_offset(pud, 0)) + BUG(); +#endif +} + static void __init fixrange_init(unsigned long start, unsigned long end, pgd_t *pgd_base) { pgd_t *pgd; + pud_t *pud; pmd_t *pmd; - pte_t *pte; int i, j; unsigned long vaddr; @@ -115,15 +140,12 @@ static void __init fixrange_init(unsigned long start, unsigned long end, pgd = pgd_base + i; for ( ; (i < PTRS_PER_PGD) && (vaddr < end); pgd++, i++) { - pmd = (pmd_t *)pgd; + pud = pud_offset(pgd, vaddr); + if (pud_none(*pud)) + one_md_table_init(pud); + pmd = pmd_offset(pud, vaddr); for (; (j < PTRS_PER_PMD) && (vaddr != end); pmd++, j++) { - if (pmd_none(*pmd)) { - pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE); - set_pmd(pmd, __pmd(_KERNPG_TABLE + - (unsigned long) __pa(pte))); - if (pte != pte_offset_kernel(pmd, 0)) - BUG(); - } + one_page_table_init(pmd); vaddr += PMD_SIZE; } j = 0; diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process_kern.c index c1adf7ba3fd..804c6bbdf67 100644 --- a/arch/um/kernel/process_kern.c +++ b/arch/um/kernel/process_kern.c @@ -43,7 +43,6 @@ #include "tlb.h" #include "frame_kern.h" #include "sigcontext.h" -#include "2_5compat.h" #include "os.h" #include "mode.h" #include "mode_kern.h" @@ -55,18 +54,6 @@ */ struct cpu_task cpu_tasks[NR_CPUS] = { [0 ... NR_CPUS - 1] = { -1, NULL } }; -struct task_struct *get_task(int pid, int require) -{ - struct task_struct *ret; - - read_lock(&tasklist_lock); - ret = find_task_by_pid(pid); - read_unlock(&tasklist_lock); - - if(require && (ret == NULL)) panic("get_task couldn't find a task\n"); - return(ret); -} - int external_pid(void *t) { struct task_struct *task = t ? t : current; @@ -189,7 +176,6 @@ void default_idle(void) while(1){ /* endless idle loop with no priority at all */ - SET_PRI(current); /* * although we are an idle CPU, we do not want to @@ -212,11 +198,6 @@ int page_size(void) return(PAGE_SIZE); } -unsigned long page_mask(void) -{ - return(PAGE_MASK); -} - void *um_virt_to_phys(struct task_struct *task, unsigned long addr, pte_t *pte_out) { @@ -349,11 +330,6 @@ char *uml_strdup(char *string) return(new); } -void *get_init_task(void) -{ - return(&init_thread_union.thread_info.task); -} - int copy_to_user_proc(void __user *to, void *from, int size) { return(copy_to_user(to, from, size)); @@ -480,15 +456,3 @@ unsigned long arch_align_stack(unsigned long sp) return sp & ~0xf; } #endif - - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c index 2b75d8d9ba7..71af4d50389 100644 --- a/arch/um/kernel/ptrace.c +++ b/arch/um/kernel/ptrace.c @@ -28,9 +28,9 @@ static inline void set_singlestepping(struct task_struct *child, int on) child->thread.singlestep_syscall = 0; #ifdef SUBARCH_SET_SINGLESTEPPING - SUBARCH_SET_SINGLESTEPPING(child, on) + SUBARCH_SET_SINGLESTEPPING(child, on); #endif - } +} /* * Called by kernel/ptrace.c when detaching.. @@ -83,7 +83,7 @@ long sys_ptrace(long request, long pid, long addr, long data) } #ifdef SUBACH_PTRACE_SPECIAL - SUBARCH_PTRACE_SPECIAL(child,request,addr,data) + SUBARCH_PTRACE_SPECIAL(child,request,addr,data); #endif ret = ptrace_check_attach(child, request == PTRACE_KILL); @@ -322,11 +322,9 @@ void syscall_trace(union uml_pt_regs *regs, int entryexit) UPT_SYSCALL_ARG2(regs), UPT_SYSCALL_ARG3(regs), UPT_SYSCALL_ARG4(regs)); - else { - int res = UPT_SYSCALL_RET(regs); - audit_syscall_exit(current, AUDITSC_RESULT(res), - res); - } + else audit_syscall_exit(current, + AUDITSC_RESULT(UPT_SYSCALL_RET(regs)), + UPT_SYSCALL_RET(regs)); } /* Fake a debug trap */ @@ -356,14 +354,3 @@ void syscall_trace(union uml_pt_regs *regs, int entryexit) current->exit_code = 0; } } - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c index e630438f9e7..f80850091e7 100644 --- a/arch/um/kernel/sysrq.c +++ b/arch/um/kernel/sysrq.c @@ -3,6 +3,7 @@ * Licensed under the GPL */ +#include "linux/config.h" #include "linux/sched.h" #include "linux/kernel.h" #include "linux/module.h" @@ -12,14 +13,14 @@ #include "sysrq.h" #include "user_util.h" -void show_trace(unsigned long * stack) +/* Catch non-i386 SUBARCH's. */ +#if !defined(CONFIG_UML_X86) || defined(CONFIG_64BIT) +void show_trace(struct task_struct *task, unsigned long * stack) { - /* XXX: Copy the CONFIG_FRAME_POINTER stack-walking backtrace from - * arch/i386/kernel/traps.c, and then move this to sys-i386/sysrq.c.*/ unsigned long addr; if (!stack) { - stack = (unsigned long*) &stack; + stack = (unsigned long*) &stack; WARN_ON(1); } @@ -35,6 +36,7 @@ void show_trace(unsigned long * stack) } printk("\n"); } +#endif /* * stack dumps generator - this is used by arch-independent code. @@ -44,7 +46,7 @@ void dump_stack(void) { unsigned long stack; - show_trace(&stack); + show_trace(current, &stack); } EXPORT_SYMBOL(dump_stack); @@ -59,7 +61,11 @@ void show_stack(struct task_struct *task, unsigned long *esp) int i; if (esp == NULL) { - if (task != current) { + if (task != current && task != NULL) { + /* XXX: Isn't this bogus? I.e. isn't this the + * *userspace* stack of this task? If not so, use this + * even when task == current (as in i386). + */ esp = (unsigned long *) KSTK_ESP(task); /* Which one? No actual difference - just coding style.*/ //esp = (unsigned long *) PT_REGS_IP(&task->thread.regs); @@ -77,5 +83,6 @@ void show_stack(struct task_struct *task, unsigned long *esp) printk("%08lx ", *stack++); } - show_trace(esp); + printk("Call Trace: \n"); + show_trace(current, esp); } diff --git a/arch/um/kernel/trap_kern.c b/arch/um/kernel/trap_kern.c index 5fca2c61eb9..c20aef12059 100644 --- a/arch/um/kernel/trap_kern.c +++ b/arch/um/kernel/trap_kern.c @@ -23,7 +23,6 @@ #include "kern.h" #include "chan_kern.h" #include "mconsole_kern.h" -#include "2_5compat.h" #include "mem.h" #include "mem_kern.h" @@ -57,10 +56,11 @@ int handle_page_fault(unsigned long address, unsigned long ip, *code_out = SEGV_ACCERR; if(is_write && !(vma->vm_flags & VM_WRITE)) goto out; + + if(!(vma->vm_flags & (VM_READ | VM_EXEC))) + goto out; + page = address & PAGE_MASK; - pgd = pgd_offset(mm, page); - pud = pud_offset(pgd, page); - pmd = pmd_offset(pud, page); do { survive: switch (handle_mm_fault(mm, vma, address, is_write)){ @@ -106,33 +106,6 @@ out_of_memory: goto out; } -LIST_HEAD(physmem_remappers); - -void register_remapper(struct remapper *info) -{ - list_add(&info->list, &physmem_remappers); -} - -static int check_remapped_addr(unsigned long address, int is_write) -{ - struct remapper *remapper; - struct list_head *ele; - __u64 offset; - int fd; - - fd = phys_mapping(__pa(address), &offset); - if(fd == -1) - return(0); - - list_for_each(ele, &physmem_remappers){ - remapper = list_entry(ele, struct remapper, list); - if((*remapper->proc)(fd, address, is_write, offset)) - return(1); - } - - return(0); -} - /* * We give a *copy* of the faultinfo in the regs to segv. * This must be done, since nesting SEGVs could overwrite @@ -151,8 +124,6 @@ unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, void *sc) flush_tlb_kernel_vm(); return(0); } - else if(check_remapped_addr(address & PAGE_MASK, is_write)) - return(0); else if(current->mm == NULL) panic("Segfault with no mm"); err = handle_page_fault(address, ip, is_write, is_user, &si.si_code); diff --git a/arch/um/kernel/tt/ksyms.c b/arch/um/kernel/tt/ksyms.c index 92ec85d67c7..84a9385a8fe 100644 --- a/arch/um/kernel/tt/ksyms.c +++ b/arch/um/kernel/tt/ksyms.c @@ -12,6 +12,7 @@ EXPORT_SYMBOL(__do_copy_to_user); EXPORT_SYMBOL(__do_strncpy_from_user); EXPORT_SYMBOL(__do_strnlen_user); EXPORT_SYMBOL(__do_clear_user); +EXPORT_SYMBOL(clear_user_tt); EXPORT_SYMBOL(tracing_pid); EXPORT_SYMBOL(honeypot); diff --git a/arch/um/kernel/tt/process_kern.c b/arch/um/kernel/tt/process_kern.c index df810ca8fc1..776310fd5b8 100644 --- a/arch/um/kernel/tt/process_kern.c +++ b/arch/um/kernel/tt/process_kern.c @@ -32,10 +32,6 @@ void *switch_to_tt(void *prev, void *next, void *last) unsigned long flags; int err, vtalrm, alrm, prof, cpu; char c; - /* jailing and SMP are incompatible, so this doesn't need to be - * made per-cpu - */ - static int reading; from = prev; to = next; @@ -59,13 +55,11 @@ void *switch_to_tt(void *prev, void *next, void *last) c = 0; set_current(to); - reading = 0; err = os_write_file(to->thread.mode.tt.switch_pipe[1], &c, sizeof(c)); if(err != sizeof(c)) panic("write of switch_pipe failed, err = %d", -err); - reading = 1; - if(from->thread.mode.tt.switch_pipe[0] == -1) + if(from->thread.mode.tt.switch_pipe[0] == -1) os_kill_process(os_getpid(), 0); err = os_read_file(from->thread.mode.tt.switch_pipe[0], &c, sizeof(c)); diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 4d10ec372a6..418427107b2 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -111,12 +111,6 @@ struct seq_operations cpuinfo_op = { .show = show_cpuinfo, }; -pte_t * __bad_pagetable(void) -{ - panic("Someone should implement __bad_pagetable"); - return(NULL); -} - /* Set in linux_main */ unsigned long host_task_size; unsigned long task_size; diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S index 76eadb30918..dd5355500bd 100644 --- a/arch/um/kernel/uml.lds.S +++ b/arch/um/kernel/uml.lds.S @@ -73,6 +73,8 @@ SECTIONS .got : { *(.got.plt) *(.got) } .dynamic : { *(.dynamic) } + .tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) } + .tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) } /* We want the small data sections together, so single-instruction offsets can access them all, and initialized data all before uninitialized, so we can shorten the on-disk segment size. */ diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile index fcd67c3414e..4351e560550 100644 --- a/arch/um/sys-i386/Makefile +++ b/arch/um/sys-i386/Makefile @@ -9,11 +9,11 @@ USER_OBJS := bugs.o ptrace_user.o sigcontext.o fault.o SYMLINKS = bitops.c semaphore.c highmem.c module.c +include arch/um/scripts/Makefile.rules + bitops.c-dir = lib semaphore.c-dir = kernel highmem.c-dir = mm module.c-dir = kernel subdir- := util - -include arch/um/scripts/Makefile.rules diff --git a/arch/um/sys-i386/delay.c b/arch/um/sys-i386/delay.c index e9892eef51c..2c11b9770e8 100644 --- a/arch/um/sys-i386/delay.c +++ b/arch/um/sys-i386/delay.c @@ -1,5 +1,7 @@ -#include "linux/delay.h" -#include "asm/param.h" +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <asm/param.h> void __delay(unsigned long time) { @@ -20,13 +22,19 @@ void __udelay(unsigned long usecs) int i, n; n = (loops_per_jiffy * HZ * usecs) / MILLION; - for(i=0;i<n;i++) ; + for(i=0;i<n;i++) + cpu_relax(); } +EXPORT_SYMBOL(__udelay); + void __const_udelay(unsigned long usecs) { int i, n; n = (loops_per_jiffy * HZ * usecs) / MILLION; - for(i=0;i<n;i++) ; + for(i=0;i<n;i++) + cpu_relax(); } + +EXPORT_SYMBOL(__const_udelay); diff --git a/arch/um/sys-i386/sysrq.c b/arch/um/sys-i386/sysrq.c index 281fc7b8ca0..e3706d15c4f 100644 --- a/arch/um/sys-i386/sysrq.c +++ b/arch/um/sys-i386/sysrq.c @@ -3,12 +3,15 @@ * Licensed under the GPL */ +#include "linux/config.h" #include "linux/kernel.h" #include "linux/smp.h" #include "linux/sched.h" +#include "linux/kallsyms.h" #include "asm/ptrace.h" #include "sysrq.h" +/* This is declared by <linux/sched.h> */ void show_regs(struct pt_regs *regs) { printk("\n"); @@ -31,5 +34,80 @@ void show_regs(struct pt_regs *regs) 0xffff & PT_REGS_DS(regs), 0xffff & PT_REGS_ES(regs)); - show_trace((unsigned long *) ®s); + show_trace(NULL, (unsigned long *) ®s); } + +/* Copied from i386. */ +static inline int valid_stack_ptr(struct thread_info *tinfo, void *p) +{ + return p > (void *)tinfo && + p < (void *)tinfo + THREAD_SIZE - 3; +} + +/* Adapted from i386 (we also print the address we read from). */ +static inline unsigned long print_context_stack(struct thread_info *tinfo, + unsigned long *stack, unsigned long ebp) +{ + unsigned long addr; + +#ifdef CONFIG_FRAME_POINTER + while (valid_stack_ptr(tinfo, (void *)ebp)) { + addr = *(unsigned long *)(ebp + 4); + printk("%08lx: [<%08lx>]", ebp + 4, addr); + print_symbol(" %s", addr); + printk("\n"); + ebp = *(unsigned long *)ebp; + } +#else + while (valid_stack_ptr(tinfo, stack)) { + addr = *stack; + if (__kernel_text_address(addr)) { + printk("%08lx: [<%08lx>]", (unsigned long) stack, addr); + print_symbol(" %s", addr); + printk("\n"); + } + stack++; + } +#endif + return ebp; +} + +void show_trace(struct task_struct* task, unsigned long * stack) +{ + unsigned long ebp; + struct thread_info *context; + + /* Turn this into BUG_ON if possible. */ + if (!stack) { + stack = (unsigned long*) &stack; + printk("show_trace: got NULL stack, implicit assumption task == current"); + WARN_ON(1); + } + + if (!task) + task = current; + + if (task != current) { + //ebp = (unsigned long) KSTK_EBP(task); + /* Which one? No actual difference - just coding style.*/ + ebp = (unsigned long) PT_REGS_EBP(&task->thread.regs); + } else { + asm ("movl %%ebp, %0" : "=r" (ebp) : ); + } + + context = (struct thread_info *) + ((unsigned long)stack & (~(THREAD_SIZE - 1))); + print_context_stack(context, stack, ebp); + + /*while (((long) stack & (THREAD_SIZE-1)) != 0) { + addr = *stack; + if (__kernel_text_address(addr)) { + printk("%08lx: [<%08lx>]", (unsigned long) stack, addr); + print_symbol(" %s", addr); + printk("\n"); + } + stack++; + }*/ + printk("\n"); +} + diff --git a/arch/um/sys-ppc/sysrq.c b/arch/um/sys-ppc/sysrq.c index 82d6e9335bb..2f816f1a0ff 100644 --- a/arch/um/sys-ppc/sysrq.c +++ b/arch/um/sys-ppc/sysrq.c @@ -27,17 +27,5 @@ void show_regs(struct pt_regs_subarch *regs) 0xffff & regs->xds, 0xffff & regs->xes); #endif - show_trace(®s->gpr[1]); + show_trace(current, ®s->gpr[1]); } - - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile index 3d7da911cc8..608466ad6b2 100644 --- a/arch/um/sys-x86_64/Makefile +++ b/arch/um/sys-x86_64/Makefile @@ -14,11 +14,11 @@ obj-$(CONFIG_MODULES) += module.o um_module.o USER_OBJS := ptrace_user.o sigcontext.o -include arch/um/scripts/Makefile.rules - SYMLINKS = bitops.c csum-copy.S csum-partial.c csum-wrappers.c memcpy.S \ semaphore.c thunk.S module.c +include arch/um/scripts/Makefile.rules + bitops.c-dir = lib csum-copy.S-dir = lib csum-partial.c-dir = lib @@ -28,6 +28,4 @@ semaphore.c-dir = kernel thunk.S-dir = lib module.c-dir = kernel -CFLAGS_csum-partial.o := -Dcsum_partial=arch_csum_partial - subdir- := util diff --git a/arch/um/sys-x86_64/delay.c b/arch/um/sys-x86_64/delay.c index 651332aeec2..137f4446b43 100644 --- a/arch/um/sys-x86_64/delay.c +++ b/arch/um/sys-x86_64/delay.c @@ -5,40 +5,37 @@ * Licensed under the GPL */ -#include "linux/delay.h" -#include "asm/processor.h" -#include "asm/param.h" +#include <linux/module.h> +#include <linux/delay.h> +#include <asm/processor.h> +#include <asm/param.h> void __delay(unsigned long loops) { unsigned long i; - for(i = 0; i < loops; i++) ; + for(i = 0; i < loops; i++) + cpu_relax(); } void __udelay(unsigned long usecs) { - int i, n; + unsigned long i, n; n = (loops_per_jiffy * HZ * usecs) / MILLION; - for(i=0;i<n;i++) ; + for(i=0;i<n;i++) + cpu_relax(); } +EXPORT_SYMBOL(__udelay); + void __const_udelay(unsigned long usecs) { - int i, n; + unsigned long i, n; n = (loops_per_jiffy * HZ * usecs) / MILLION; - for(i=0;i<n;i++) ; + for(i=0;i<n;i++) + cpu_relax(); } -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ +EXPORT_SYMBOL(__const_udelay); diff --git a/arch/um/sys-x86_64/ksyms.c b/arch/um/sys-x86_64/ksyms.c index a27f0ee6a4f..85927380820 100644 --- a/arch/um/sys-x86_64/ksyms.c +++ b/arch/um/sys-x86_64/ksyms.c @@ -16,5 +16,4 @@ EXPORT_SYMBOL(__up_wakeup); EXPORT_SYMBOL(__memcpy); /* Networking helper routines. */ -/*EXPORT_SYMBOL(csum_partial_copy_from); -EXPORT_SYMBOL(csum_partial_copy_to);*/ +EXPORT_SYMBOL(ip_compute_csum); diff --git a/arch/um/sys-x86_64/ptrace.c b/arch/um/sys-x86_64/ptrace.c index b593bb256f2..74eee5c7c6d 100644 --- a/arch/um/sys-x86_64/ptrace.c +++ b/arch/um/sys-x86_64/ptrace.c @@ -5,10 +5,11 @@ */ #define __FRAME_OFFSETS -#include "asm/ptrace.h" -#include "linux/sched.h" -#include "linux/errno.h" -#include "asm/elf.h" +#include <asm/ptrace.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <asm/uaccess.h> +#include <asm/elf.h> /* XXX x86_64 */ unsigned long not_ss; diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/um/sys-x86_64/syscalls.c index dd9914642b8..6f44f40204e 100644 --- a/arch/um/sys-x86_64/syscalls.c +++ b/arch/um/sys-x86_64/syscalls.c @@ -15,6 +15,7 @@ #include "asm/unistd.h" #include "asm/prctl.h" /* XXX This should get the constants from libc */ #include "choose-mode.h" +#include "kern.h" asmlinkage long sys_uname64(struct new_utsname __user * name) { @@ -132,23 +133,27 @@ static long arch_prctl_tt(int code, unsigned long addr) #ifdef CONFIG_MODE_SKAS +/* XXX: Must also call arch_prctl in the host, beside saving the segment bases! */ static long arch_prctl_skas(int code, unsigned long addr) { long ret = 0; switch(code){ - case ARCH_SET_GS: - current->thread.regs.regs.skas.regs[GS_BASE / sizeof(unsigned long)] = addr; - break; case ARCH_SET_FS: current->thread.regs.regs.skas.regs[FS_BASE / sizeof(unsigned long)] = addr; break; + case ARCH_SET_GS: + current->thread.regs.regs.skas.regs[GS_BASE / sizeof(unsigned long)] = addr; + break; case ARCH_GET_FS: - ret = put_user(current->thread.regs.regs.skas.regs[GS / sizeof(unsigned long)], &addr); + ret = put_user(current->thread.regs.regs.skas. + regs[FS_BASE / sizeof(unsigned long)], + (unsigned long __user *)addr); break; case ARCH_GET_GS: - ret = put_user(current->thread.regs.regs.skas.regs[FS / sizeof(unsigned \ -long)], &addr); + ret = put_user(current->thread.regs.regs.skas. + regs[GS_BASE / sizeof(unsigned long)], + (unsigned long __user *)addr); break; default: ret = -EINVAL; diff --git a/arch/um/sys-x86_64/sysrq.c b/arch/um/sys-x86_64/sysrq.c index ddf74691a61..d0a25af19a5 100644 --- a/arch/um/sys-x86_64/sysrq.c +++ b/arch/um/sys-x86_64/sysrq.c @@ -36,14 +36,5 @@ void __show_regs(struct pt_regs * regs) void show_regs(struct pt_regs *regs) { __show_regs(regs); - show_trace((unsigned long *) ®s); + show_trace(current, (unsigned long *) ®s); } - -/* Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/sys-x86_64/user-offsets.c b/arch/um/sys-x86_64/user-offsets.c index 5e14792e483..513d17ceafd 100644 --- a/arch/um/sys-x86_64/user-offsets.c +++ b/arch/um/sys-x86_64/user-offsets.c @@ -3,6 +3,14 @@ #include <signal.h> #define __FRAME_OFFSETS #include <asm/ptrace.h> +#include <asm/types.h> +/* For some reason, x86_64 defines u64 and u32 only in <pci/types.h>, which I + * refuse to include here, even though they're used throughout the headers. + * These are used in asm/user.h, and that include can't be avoided because of + * the sizeof(struct user_regs_struct) below. + */ +typedef __u64 u64; +typedef __u32 u32; #include <asm/user.h> #define DEFINE(sym, val) \ diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 82cb2a3f127..289f448ac89 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -305,6 +305,7 @@ config HPET_TIMER config X86_PM_TIMER bool "PM timer" + depends on ACPI default y help Support the ACPI PM timer for time keeping. This is slow, @@ -421,7 +422,7 @@ config PCI_DIRECT config PCI_MMCONFIG bool "Support mmconfig PCI config space access" - depends on PCI + depends on PCI && ACPI select ACPI_BOOT config UNORDERED_IO diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index ac768432495..afd87e64d0a 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -37,11 +37,14 @@ #include <asm/desc.h> #include <asm/proto.h> #include <asm/mach_apic.h> +#include <asm/acpi.h> #define __apicdebuginit __init int sis_apic_bug; /* not actually supported, dummy for compile */ +static int no_timer_check; + static DEFINE_SPINLOCK(ioapic_lock); /* @@ -1601,7 +1604,7 @@ static inline void check_timer(void) * Ok, does IRQ0 through the IOAPIC work? */ unmask_IO_APIC_irq(0); - if (timer_irq_works()) { + if (!no_timer_check && timer_irq_works()) { nmi_watchdog_default(); if (nmi_watchdog == NMI_IO_APIC) { disable_8259A_irq(0); @@ -1671,6 +1674,13 @@ static inline void check_timer(void) panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n"); } +static int __init notimercheck(char *s) +{ + no_timer_check = 1; + return 1; +} +__setup("no_timer_check", notimercheck); + /* * * IRQ's that are handled by the PIC in the MPS IOAPIC case. diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c index f86d9db94bf..61a63be6b29 100644 --- a/arch/x86_64/kernel/mpparse.c +++ b/arch/x86_64/kernel/mpparse.c @@ -30,6 +30,7 @@ #include <asm/pgalloc.h> #include <asm/io_apic.h> #include <asm/proto.h> +#include <asm/acpi.h> /* Have we found an MP table */ int smp_found_config; diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86_64/kernel/ptrace.c index 60dc9b98951..525f6a128a2 100644 --- a/arch/x86_64/kernel/ptrace.c +++ b/arch/x86_64/kernel/ptrace.c @@ -380,7 +380,7 @@ asmlinkage long sys_ptrace(long request, long pid, unsigned long addr, long data break; switch (addr) { - case 0 ... sizeof(struct user_regs_struct): + case 0 ... sizeof(struct user_regs_struct) - sizeof(long): tmp = getreg(child, addr); break; case offsetof(struct user, u_debugreg[0]): @@ -425,7 +425,7 @@ asmlinkage long sys_ptrace(long request, long pid, unsigned long addr, long data break; switch (addr) { - case 0 ... sizeof(struct user_regs_struct): + case 0 ... sizeof(struct user_regs_struct) - sizeof(long): ret = putreg(child, addr, data); break; /* Disallows to set a breakpoint into the vsyscall */ diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index b9fd0252c27..99f038ede23 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -719,7 +719,6 @@ static void __init display_cacheinfo(struct cpuinfo_x86 *c) } } -#ifdef CONFIG_SMP /* * On a AMD dual core setup the lower bits of the APIC id distingush the cores. * Assumes number of cores is a power of two. @@ -729,16 +728,24 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) #ifdef CONFIG_SMP int cpu = smp_processor_id(); int node = 0; + unsigned bits; if (c->x86_num_cores == 1) return; - /* Fix up the APIC ID following the AMD specification. */ - cpu_core_id[cpu] >>= hweight32(c->x86_num_cores - 1); + + bits = 0; + while ((1 << bits) < c->x86_num_cores) + bits++; + + /* Low order bits define the core id (index of core in socket) */ + cpu_core_id[cpu] = phys_proc_id[cpu] & ((1 << bits)-1); + /* Convert the APIC ID into the socket ID */ + phys_proc_id[cpu] >>= bits; #ifdef CONFIG_NUMA /* When an ACPI SRAT table is available use the mappings from SRAT instead. */ if (acpi_numa <= 0) { - node = cpu_core_id[cpu]; + node = phys_proc_id[cpu]; if (!node_online(node)) node = first_node(node_online_map); cpu_to_node[cpu] = node; @@ -746,18 +753,11 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) node = cpu_to_node[cpu]; } #endif - /* For now: - better than BAD_APIC_ID at least*/ - phys_proc_id[cpu] = cpu_core_id[cpu]; printk(KERN_INFO "CPU %d(%d) -> Node %d -> Core %d\n", cpu, c->x86_num_cores, node, cpu_core_id[cpu]); #endif } -#else -static void __init amd_detect_cmp(struct cpuinfo_x86 *c) -{ -} -#endif static int __init init_amd(struct cpuinfo_x86 *c) { @@ -963,8 +963,7 @@ void __init early_identify_cpu(struct cpuinfo_x86 *c) } #ifdef CONFIG_SMP - phys_proc_id[smp_processor_id()] = - cpu_core_id[smp_processor_id()] = (cpuid_ebx(1) >> 24) & 0xff; + phys_proc_id[smp_processor_id()] = (cpuid_ebx(1) >> 24) & 0xff; #endif } diff --git a/arch/x86_64/kernel/signal.c b/arch/x86_64/kernel/signal.c index d439ced150c..429c0269dc4 100644 --- a/arch/x86_64/kernel/signal.c +++ b/arch/x86_64/kernel/signal.c @@ -28,6 +28,7 @@ #include <asm/uaccess.h> #include <asm/i387.h> #include <asm/proto.h> +#include <asm/ia32_unistd.h> /* #define DEBUG_SIG 1 */ @@ -452,7 +453,9 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset) regs->rip -= 2; } if (regs->rax == (unsigned long)-ERESTART_RESTARTBLOCK) { - regs->rax = __NR_restart_syscall; + regs->rax = test_thread_flag(TIF_IA32) ? + __NR_ia32_restart_syscall : + __NR_restart_syscall; regs->rip -= 2; } } diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index 5abdee1e16a..f1ec0f34594 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -94,6 +94,7 @@ int smp_threads_ready; cpumask_t cpu_sibling_map[NR_CPUS] __cacheline_aligned; cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned; +EXPORT_SYMBOL(cpu_core_map); /* * Trampoline 80x86 program as an array. diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 735b6767c8e..fb8c809b4cd 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -27,7 +27,9 @@ #include <linux/bcd.h> #include <linux/kallsyms.h> #include <linux/acpi.h> +#ifdef CONFIG_ACPI #include <acpi/achware.h> /* for PM timer frequency */ +#endif #include <asm/8253pit.h> #include <asm/pgtable.h> #include <asm/vsyscall.h> diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c index 65a37f52c56..3dfec8fdabc 100644 --- a/arch/x86_64/kernel/traps.c +++ b/arch/x86_64/kernel/traps.c @@ -332,10 +332,12 @@ void handle_BUG(struct pt_regs *regs) printk(KERN_ALERT "Kernel BUG at %.50s:%d\n", f.filename, f.line); } +#ifdef CONFIG_BUG void out_of_line_bug(void) { BUG(); } +#endif static DEFINE_SPINLOCK(die_lock); static int die_owner = -1; diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c index a43dedb58fa..68ec03070e5 100644 --- a/arch/x86_64/kernel/x8664_ksyms.c +++ b/arch/x86_64/kernel/x8664_ksyms.c @@ -193,8 +193,9 @@ EXPORT_SYMBOL(smp_num_siblings); extern void do_softirq_thunk(void); EXPORT_SYMBOL(do_softirq_thunk); -void out_of_line_bug(void); +#ifdef CONFIG_BUG EXPORT_SYMBOL(out_of_line_bug); +#endif EXPORT_SYMBOL(init_level4_pgt); diff --git a/arch/x86_64/mm/ioremap.c b/arch/x86_64/mm/ioremap.c index c6fb0cb6999..58aac23760e 100644 --- a/arch/x86_64/mm/ioremap.c +++ b/arch/x86_64/mm/ioremap.c @@ -133,7 +133,7 @@ ioremap_change_attr(unsigned long phys_addr, unsigned long size, unsigned long flags) { int err = 0; - if (flags && phys_addr + size - 1 < (end_pfn_map << PAGE_SHIFT)) { + if (phys_addr + size - 1 < (end_pfn_map << PAGE_SHIFT)) { unsigned long npages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; unsigned long vaddr = (unsigned long) __va(phys_addr); @@ -214,7 +214,7 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l remove_vm_area((void *)(PAGE_MASK & (unsigned long) addr)); return NULL; } - if (ioremap_change_attr(phys_addr, size, flags) < 0) { + if (flags && ioremap_change_attr(phys_addr, size, flags) < 0) { area->flags &= 0xffffff; vunmap(addr); return NULL; @@ -251,7 +251,7 @@ void __iomem *ioremap_nocache (unsigned long phys_addr, unsigned long size) void iounmap(volatile void __iomem *addr) { - struct vm_struct *p, **pprev; + struct vm_struct *p; if (addr <= high_memory) return; @@ -260,24 +260,11 @@ void iounmap(volatile void __iomem *addr) return; write_lock(&vmlist_lock); - for (p = vmlist, pprev = &vmlist; p != NULL; pprev = &p->next, p = *pprev) - if (p->addr == (void *)(PAGE_MASK & (unsigned long)addr)) - break; - if (!p) { - printk("__iounmap: bad address %p\n", addr); - goto out_unlock; - } - *pprev = p->next; - unmap_vm_area(p); - if ((p->flags >> 20) && - p->phys_addr + p->size - 1 < virt_to_phys(high_memory)) { - /* p->size includes the guard page, but cpa doesn't like that */ - change_page_attr_addr((unsigned long)__va(p->phys_addr), - p->size >> PAGE_SHIFT, - PAGE_KERNEL); - global_flush_tlb(); - } -out_unlock: + p = __remove_vm_area((void *)((unsigned long)addr & PAGE_MASK)); + if (!p) + printk("iounmap: bad address %p\n", addr); + else if (p->flags >> 20) + ioremap_change_attr(p->phys_addr, p->size, 0); write_unlock(&vmlist_lock); kfree(p); } |