diff options
Diffstat (limited to 'arch')
146 files changed, 1848 insertions, 1893 deletions
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 0636116210d..01fe990d3e5 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -37,6 +37,7 @@ #include <linux/namei.h> #include <linux/uio.h> #include <linux/vfs.h> +#include <linux/rcupdate.h> #include <asm/fpu.h> #include <asm/io.h> @@ -975,6 +976,7 @@ osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, long timeout; int ret = -EINVAL; struct fdtable *fdt; + int max_fdset; timeout = MAX_SCHEDULE_TIMEOUT; if (tvp) { @@ -996,8 +998,11 @@ osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, } } + rcu_read_lock(); fdt = files_fdtable(current->files); - if (n < 0 || n > fdt->max_fdset) + max_fdset = fdt->max_fdset; + rcu_read_unlock(); + if (n < 0 || n > max_fdset) goto out_nofds; /* diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c index 9e36b07fa94..d5da6b1b28e 100644 --- a/arch/alpha/kernel/sys_dp264.c +++ b/arch/alpha/kernel/sys_dp264.c @@ -395,6 +395,22 @@ clipper_init_irq(void) */ static int __init +isa_irq_fixup(struct pci_dev *dev, int irq) +{ + u8 irq8; + + if (irq > 0) + return irq; + + /* This interrupt is routed via ISA bridge, so we'll + just have to trust whatever value the console might + have assigned. */ + pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq8); + + return irq8 & 0xf; +} + +static int __init dp264_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { static char irq_tab[6][5] __initdata = { @@ -407,25 +423,13 @@ dp264_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { 16+ 3, 16+ 3, 16+ 2, 16+ 1, 16+ 0} /* IdSel 10 slot 3 */ }; const long min_idsel = 5, max_idsel = 10, irqs_per_slot = 5; - struct pci_controller *hose = dev->sysdata; int irq = COMMON_TABLE_LOOKUP; - if (irq > 0) { + if (irq > 0) irq += 16 * hose->index; - } else { - /* ??? The Contaq IDE controller on the ISA bridge uses - "legacy" interrupts 14 and 15. I don't know if anything - can wind up at the same slot+pin on hose1, so we'll - just have to trust whatever value the console might - have assigned. */ - - u8 irq8; - pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq8); - irq = irq8; - } - return irq; + return isa_irq_fixup(dev, irq); } static int __init @@ -453,7 +457,8 @@ monet_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { 24, 24, 25, 26, 27} /* IdSel 15 slot 5 PCI2*/ }; const long min_idsel = 3, max_idsel = 15, irqs_per_slot = 5; - return COMMON_TABLE_LOOKUP; + + return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP); } static u8 __init @@ -507,7 +512,8 @@ webbrick_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { 47, 47, 46, 45, 44}, /* IdSel 17 slot 3 */ }; const long min_idsel = 7, max_idsel = 17, irqs_per_slot = 5; - return COMMON_TABLE_LOOKUP; + + return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP); } static int __init @@ -524,14 +530,13 @@ clipper_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { -1, -1, -1, -1, -1} /* IdSel 7 ISA Bridge */ }; const long min_idsel = 1, max_idsel = 7, irqs_per_slot = 5; - struct pci_controller *hose = dev->sysdata; int irq = COMMON_TABLE_LOOKUP; if (irq > 0) irq += 16 * hose->index; - return irq; + return isa_irq_fixup(dev, irq); } static void __init diff --git a/arch/arm/boot/compressed/ofw-shark.c b/arch/arm/boot/compressed/ofw-shark.c index 7f6f5db0d06..465c54b6b12 100644 --- a/arch/arm/boot/compressed/ofw-shark.c +++ b/arch/arm/boot/compressed/ofw-shark.c @@ -256,5 +256,5 @@ asmlinkage void ofw_init(ofw_handle_t o, int *nomr, int *pointer) temp[11]='\0'; mem_len = OF_getproplen(o,phandle, temp); OF_getprop(o,phandle, temp, buffer, mem_len); - (unsigned char) pointer[32] = ((unsigned char *) buffer)[mem_len-2]; + * ((unsigned char *) &pointer[32]) = ((unsigned char *) buffer)[mem_len-2]; } diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 2786f7c34b3..a7bd8570015 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -551,7 +551,7 @@ struct locomo_save_data { u16 LCM_SPIMD; }; -static int locomo_suspend(struct device *dev, u32 pm_message_t, u32 level) +static int locomo_suspend(struct device *dev, pm_message_t state, u32 level) { struct locomo *lchip = dev_get_drvdata(dev); struct locomo_save_data *save; diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/enp2611_defconfig index f67ca01b498..30e6444f9aa 100644 --- a/arch/arm/configs/enp2611_defconfig +++ b/arch/arm/configs/enp2611_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Thu Jul 7 16:41:21 2005 +# Linux kernel version: 2.6.13 +# Wed Sep 14 10:51:52 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -135,7 +135,6 @@ CONFIG_PCI_NAMES=y # # Kernel Features # -# CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set @@ -179,6 +178,68 @@ CONFIG_BINFMT_ELF=y # CONFIG_PM is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_IP_TCPDIAG is not set +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# # Device Drivers # @@ -248,6 +309,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_IXP2000=y # CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -334,72 +396,8 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set @@ -509,6 +507,8 @@ CONFIG_DLCI_MAX=8 # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -635,7 +635,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_IXP2000 is not set +CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -649,11 +649,28 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set +CONFIG_I2C_SENSOR=y # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -CONFIG_I2C_SENSOR=y +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -679,30 +696,15 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -770,6 +772,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -812,8 +815,7 @@ CONFIG_RAMFS=y # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig index 5c6c928215d..678720fa2e2 100644 --- a/arch/arm/configs/ixdp2400_defconfig +++ b/arch/arm/configs/ixdp2400_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Thu Jul 7 16:49:01 2005 +# Linux kernel version: 2.6.13 +# Wed Sep 14 10:52:01 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -136,7 +136,6 @@ CONFIG_PCI_NAMES=y # # Kernel Features # -# CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set @@ -180,6 +179,68 @@ CONFIG_BINFMT_ELF=y # CONFIG_PM is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_IP_TCPDIAG is not set +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# # Device Drivers # @@ -249,6 +310,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_IXP2000=y # CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -335,72 +397,8 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set @@ -510,6 +508,8 @@ CONFIG_DLCI_MAX=8 # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -636,7 +636,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_IXP2000 is not set +CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -650,11 +650,28 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set +CONFIG_I2C_SENSOR=y # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -CONFIG_I2C_SENSOR=y +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -680,30 +697,15 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -771,6 +773,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -813,8 +816,7 @@ CONFIG_RAMFS=y # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig index 6dc40f6be0e..38c9a721d5c 100644 --- a/arch/arm/configs/ixdp2401_defconfig +++ b/arch/arm/configs/ixdp2401_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Thu Jul 7 16:49:08 2005 +# Linux kernel version: 2.6.13 +# Wed Sep 14 10:52:10 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -136,7 +136,6 @@ CONFIG_PCI_NAMES=y # # Kernel Features # -# CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set @@ -180,6 +179,68 @@ CONFIG_BINFMT_ELF=y # CONFIG_PM is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# # Device Drivers # @@ -249,6 +310,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_IXP2000=y # CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -335,72 +397,8 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set @@ -511,6 +509,8 @@ CONFIG_DLCI_MAX=8 # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -637,7 +637,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_IXP2000 is not set +CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -651,11 +651,28 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set +CONFIG_I2C_SENSOR=y # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -CONFIG_I2C_SENSOR=y +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -681,30 +698,15 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -772,6 +774,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -814,8 +817,7 @@ CONFIG_RAMFS=y # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig index d2bb0b7153f..261e2343903 100644 --- a/arch/arm/configs/ixdp2800_defconfig +++ b/arch/arm/configs/ixdp2800_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Thu Jul 7 16:49:20 2005 +# Linux kernel version: 2.6.13 +# Wed Sep 14 10:52:23 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -136,7 +136,6 @@ CONFIG_PCI_NAMES=y # # Kernel Features # -# CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set @@ -180,6 +179,68 @@ CONFIG_BINFMT_ELF=y # CONFIG_PM is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_IP_TCPDIAG is not set +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# # Device Drivers # @@ -249,6 +310,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_IXP2000=y # CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -335,72 +397,8 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set @@ -510,6 +508,8 @@ CONFIG_DLCI_MAX=8 # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -636,7 +636,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_IXP2000 is not set +CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -650,11 +650,28 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set +CONFIG_I2C_SENSOR=y # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -CONFIG_I2C_SENSOR=y +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -680,30 +697,15 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -771,6 +773,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -813,8 +816,7 @@ CONFIG_RAMFS=y # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig index 2d6f960e339..12ef23d1c01 100644 --- a/arch/arm/configs/ixdp2801_defconfig +++ b/arch/arm/configs/ixdp2801_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Thu Jul 7 16:49:13 2005 +# Linux kernel version: 2.6.13 +# Wed Sep 14 10:52:16 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -136,7 +136,6 @@ CONFIG_PCI_NAMES=y # # Kernel Features # -# CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set @@ -180,6 +179,68 @@ CONFIG_BINFMT_ELF=y # CONFIG_PM is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_IP_TCPDIAG is not set +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# # Device Drivers # @@ -249,6 +310,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_IXP2000=y # CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -335,72 +397,8 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set @@ -511,6 +509,8 @@ CONFIG_DLCI_MAX=8 # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -637,7 +637,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_IXP2000 is not set +CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -651,11 +651,28 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set +CONFIG_I2C_SENSOR=y # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -CONFIG_I2C_SENSOR=y +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -681,30 +698,15 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -772,6 +774,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -814,8 +817,7 @@ CONFIG_RAMFS=y # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y diff --git a/arch/arm/kernel/semaphore.c b/arch/arm/kernel/semaphore.c index ac423e3e224..4c31f292305 100644 --- a/arch/arm/kernel/semaphore.c +++ b/arch/arm/kernel/semaphore.c @@ -178,7 +178,7 @@ int __down_trylock(struct semaphore * sem) * registers (r0 to r3 and lr), but not ip, as we use it as a return * value in some cases.. */ -asm(" .section .sched.text,\"ax\" \n\ +asm(" .section .sched.text,\"ax\",%progbits \n\ .align 5 \n\ .globl __down_failed \n\ __down_failed: \n\ diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 4554c961251..e7d22dbcb69 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -624,6 +624,9 @@ void __attribute__((noreturn)) __bug(const char *file, int line, void *data) printk(" - extra data = %p", data); printk("\n"); *(int *)0 = 0; + + /* Avoid "noreturn function does return" */ + for (;;); } EXPORT_SYMBOL(__bug); diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index ad2d66c93a5..08e58ecd44b 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -23,20 +23,20 @@ SECTIONS *(.init.text) _einittext = .; __proc_info_begin = .; - *(.proc.info) + *(.proc.info.init) __proc_info_end = .; __arch_info_begin = .; - *(.arch.info) + *(.arch.info.init) __arch_info_end = .; __tagtable_begin = .; - *(.taglist) + *(.taglist.init) __tagtable_end = .; . = ALIGN(16); __setup_start = .; *(.init.setup) __setup_end = .; __early_begin = .; - *(__early_param) + *(.early_param.init) __early_end = .; __initcall_start = .; *(.initcall1.init) diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index ae1fa099d5f..39b06ed8064 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -123,6 +123,7 @@ static void __init ixdp425_init(void) platform_add_devices(ixdp425_devices, ARRAY_SIZE(ixdp425_devices)); } +#ifdef CONFIG_ARCH_IXDP465 MACHINE_START(IXDP425, "Intel IXDP425 Development Platform") /* Maintainer: MontaVista Software, Inc. */ .phys_ram = PHYS_OFFSET, @@ -134,7 +135,9 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform") .boot_params = 0x0100, .init_machine = ixdp425_init, MACHINE_END +#endif +#ifdef CONFIG_MACH_IXDP465 MACHINE_START(IXDP465, "Intel IXDP465 Development Platform") /* Maintainer: MontaVista Software, Inc. */ .phys_ram = PHYS_OFFSET, @@ -146,7 +149,9 @@ MACHINE_START(IXDP465, "Intel IXDP465 Development Platform") .boot_params = 0x0100, .init_machine = ixdp425_init, MACHINE_END +#endif +#ifdef CONFIG_ARCH_PRPMC1100 MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform") /* Maintainer: MontaVista Software, Inc. */ .phys_ram = PHYS_OFFSET, @@ -158,6 +163,7 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform") .boot_params = 0x0100, .init_machine = ixdp425_init, MACHINE_END +#endif /* * Avila is functionally equivalent to IXDP425 except that it adds diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 426c2bc517e..be37586cb1b 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -198,13 +198,10 @@ static void corgi_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; - if (( 1 << vdd) & p_d->ocr_mask) { - printk(KERN_DEBUG "%s: on\n", __FUNCTION__); + if (( 1 << vdd) & p_d->ocr_mask) GPSR1 = GPIO_bit(CORGI_GPIO_SD_PWR); - } else { - printk(KERN_DEBUG "%s: off\n", __FUNCTION__); + else GPCR1 = GPIO_bit(CORGI_GPIO_SD_PWR); - } } static int corgi_mci_get_ro(struct device *dev) @@ -259,6 +256,16 @@ static struct platform_device *devices[] __initdata = { static void __init corgi_init(void) { + /* setup sleep mode values */ + PWER = 0x00000002; + PFER = 0x00000000; + PRER = 0x00000002; + PGSR0 = 0x0158C000; + PGSR1 = 0x00FF0080; + PGSR2 = 0x0001C004; + /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ + PCFR |= PCFR_OPDE; + corgi_ssp_set_machinfo(&corgi_ssp_machinfo); pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT); @@ -285,42 +292,14 @@ static void __init fixup_corgi(struct machine_desc *desc, mi->bank[0].size = (64*1024*1024); } -static void __init corgi_init_irq(void) -{ - pxa_init_irq(); -} - -static struct map_desc corgi_io_desc[] __initdata = { -/* virtual physical length */ -/* { 0xf1000000, 0x08000000, 0x01000000, MT_DEVICE },*/ /* LCDC (readable for Qt driver) */ -/* { 0xef700000, 0x10800000, 0x00001000, MT_DEVICE },*/ /* SCOOP */ - { 0xef800000, 0x00000000, 0x00800000, MT_DEVICE }, /* Boot Flash */ -}; - -static void __init corgi_map_io(void) -{ - pxa_map_io(); - iotable_init(corgi_io_desc,ARRAY_SIZE(corgi_io_desc)); - - /* setup sleep mode values */ - PWER = 0x00000002; - PFER = 0x00000000; - PRER = 0x00000002; - PGSR0 = 0x0158C000; - PGSR1 = 0x00FF0080; - PGSR2 = 0x0001C004; - /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ - PCFR |= PCFR_OPDE; -} - #ifdef CONFIG_MACH_CORGI MACHINE_START(CORGI, "SHARP Corgi") .phys_ram = 0xa0000000, .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, - .map_io = corgi_map_io, - .init_irq = corgi_init_irq, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END @@ -332,8 +311,8 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, - .map_io = corgi_map_io, - .init_irq = corgi_init_irq, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END @@ -345,8 +324,8 @@ MACHINE_START(HUSKY, "SHARP Husky") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, - .map_io = corgi_map_io, - .init_irq = corgi_init_irq, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 923f6eb774c..1f38033921e 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -146,6 +146,11 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = { // no D+ pullup; lubbock can't connect/disconnect in software }; +static struct platform_device lub_audio_device = { + .name = "pxa2xx-ac97", + .id = -1, +}; + static struct resource sa1111_resources[] = { [0] = { .start = 0x10000000, @@ -195,6 +200,7 @@ static struct platform_device smc91x_device = { static struct platform_device *devices[] __initdata = { &sa1111_device, + &lub_audio_device, &smc91x_device, }; diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 47cfb8bb831..f2563881001 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -30,6 +30,8 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/irq.h> +#include <asm/arch/mmc.h> +#include <asm/arch/udc.h> #include <asm/arch/poodle.h> #include <asm/arch/pxafb.h> @@ -93,6 +95,83 @@ static struct platform_device locomo_device = { .resource = locomo_resources, }; + +/* + * MMC/SD Device + * + * The card detect interrupt isn't debounced so we delay it by 250ms + * to give the card a chance to fully insert/eject. + */ +static struct pxamci_platform_data poodle_mci_platform_data; + +static int poodle_mci_init(struct device *dev, irqreturn_t (*poodle_detect_int)(int, void *, struct pt_regs *), void *data) +{ + int err; + + /* setup GPIO for PXA25x MMC controller */ + pxa_gpio_mode(GPIO6_MMCCLK_MD); + pxa_gpio_mode(GPIO8_MMCCS0_MD); + pxa_gpio_mode(POODLE_GPIO_nSD_DETECT | GPIO_IN); + pxa_gpio_mode(POODLE_GPIO_SD_PWR | GPIO_OUT); + + poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250); + + err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int, SA_INTERRUPT, + "MMC card detect", data); + if (err) { + printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); + return -1; + } + + set_irq_type(POODLE_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE); + + return 0; +} + +static void poodle_mci_setpower(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data* p_d = dev->platform_data; + + if (( 1 << vdd) & p_d->ocr_mask) + GPSR1 = GPIO_bit(POODLE_GPIO_SD_PWR); + else + GPCR1 = GPIO_bit(POODLE_GPIO_SD_PWR); +} + +static void poodle_mci_exit(struct device *dev, void *data) +{ + free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data); +} + +static struct pxamci_platform_data poodle_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = poodle_mci_init, + .setpower = poodle_mci_setpower, + .exit = poodle_mci_exit, +}; + + +/* + * USB Device Controller + */ +static void poodle_udc_command(int cmd) +{ + switch(cmd) { + case PXA2XX_UDC_CMD_CONNECT: + GPSR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP); + break; + case PXA2XX_UDC_CMD_DISCONNECT: + GPCR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP); + break; + } +} + +static struct pxa2xx_udc_mach_info udc_info __initdata = { + /* no connect GPIO; poodle can't tell connection status */ + .udc_command = poodle_udc_command, +}; + + /* PXAFB device */ static struct pxafb_mach_info poodle_fb_info __initdata = { .pixclock = 144700, @@ -126,6 +205,15 @@ static void __init poodle_init(void) { int ret = 0; + /* setup sleep mode values */ + PWER = 0x00000002; + PFER = 0x00000000; + PRER = 0x00000002; + PGSR0 = 0x00008000; + PGSR1 = 0x003F0202; + PGSR2 = 0x0001C000; + PCFR |= PCFR_OPDE; + /* cpu initialize */ /* Pgsr Register */ PGSR0 = 0x0146dd80; @@ -155,6 +243,9 @@ static void __init poodle_init(void) GPSR2 = 0x00000000; set_pxa_fb_info(&poodle_fb_info); + pxa_gpio_mode(POODLE_GPIO_USB_PULLUP | GPIO_OUT); + pxa_set_udc_info(&udc_info); + pxa_set_mci_info(&poodle_mci_platform_data); scoop_num = 1; scoop_devs = &poodle_pcmcia_scoop[0]; @@ -171,32 +262,12 @@ static void __init fixup_poodle(struct machine_desc *desc, sharpsl_save_param(); } -static struct map_desc poodle_io_desc[] __initdata = { - /* virtual physical length */ - { 0xef800000, 0x00000000, 0x00800000, MT_DEVICE }, /* Boot Flash */ -}; - -static void __init poodle_map_io(void) -{ - pxa_map_io(); - iotable_init(poodle_io_desc, ARRAY_SIZE(poodle_io_desc)); - - /* setup sleep mode values */ - PWER = 0x00000002; - PFER = 0x00000000; - PRER = 0x00000002; - PGSR0 = 0x00008000; - PGSR1 = 0x003F0202; - PGSR2 = 0x0001C000; - PCFR |= PCFR_OPDE; -} - MACHINE_START(POODLE, "SHARP Poodle") .phys_ram = 0xa0000000, .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_poodle, - .map_io = poodle_map_io, + .map_io = pxa_map_io, .init_irq = pxa_init_irq, .timer = &pxa_timer, .init_machine = poodle_init, diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c index f87aa0b669a..7c05f27fe1d 100644 --- a/arch/arm/mach-s3c2410/mach-anubis.c +++ b/arch/arm/mach-s3c2410/mach-anubis.c @@ -12,6 +12,7 @@ * * Modifications: * 02-May-2005 BJD Copied from mach-bast.c + * 20-Sep-2005 BJD Added static to non-exported items */ #include <linux/kernel.h> @@ -232,7 +233,7 @@ static struct s3c24xx_board anubis_board __initdata = { .clocks_count = ARRAY_SIZE(anubis_clocks) }; -void __init anubis_map_io(void) +static void __init anubis_map_io(void) { /* initialise the clocks */ diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 1a3367da640..ed1f07d7252 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -31,6 +31,7 @@ * 17-Jul-2005 BJD Changed to platform device for SuperIO 16550s * 25-Jul-2005 BJD Removed ASIX static mappings * 27-Jul-2005 BJD Ensure maximum frequency of i2c bus + * 20-Sep-2005 BJD Added static to non-exported items */ #include <linux/kernel.h> @@ -428,7 +429,7 @@ static struct s3c24xx_board bast_board __initdata = { .clocks_count = ARRAY_SIZE(bast_clocks) }; -void __init bast_map_io(void) +static void __init bast_map_io(void) { /* initialise the clocks */ diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 6ff1889fbd2..fb3cb01266e 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -24,6 +24,7 @@ * 10-Jan-2005 BJD Removed include of s3c2410.h * 14-Jan-2005 BJD Added clock init * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA + * 20-Sep-2005 BJD Added static to non-exported items */ #include <linux/kernel.h> @@ -147,7 +148,7 @@ static struct s3c24xx_board h1940_board __initdata = { .devices_count = ARRAY_SIZE(h1940_devices) }; -void __init h1940_map_io(void) +static void __init h1940_map_io(void) { s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc)); s3c24xx_init_clocks(0); @@ -155,13 +156,13 @@ void __init h1940_map_io(void) s3c24xx_set_board(&h1940_board); } -void __init h1940_init_irq(void) +static void __init h1940_init_irq(void) { s3c24xx_init_irq(); } -void __init h1940_init(void) +static void __init h1940_init(void) { set_s3c2410fb_info(&h1940_lcdcfg); } diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 66bf5bb2b3d..5c0f2b091f9 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -97,7 +97,7 @@ static struct s3c24xx_board n30_board __initdata = { .devices_count = ARRAY_SIZE(n30_devices) }; -void __init n30_map_io(void) +static void __init n30_map_io(void) { s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc)); s3c24xx_init_clocks(0); @@ -105,14 +105,14 @@ void __init n30_map_io(void) s3c24xx_set_board(&n30_board); } -void __init n30_init_irq(void) +static void __init n30_init_irq(void) { s3c24xx_init_irq(); } /* GPB3 is the line that controls the pull-up for the USB D+ line */ -void __init n30_init(void) +static void __init n30_init(void) { s3c_device_i2c.dev.platform_data = &n30_i2ccfg; diff --git a/arch/arm/mach-s3c2410/mach-nexcoder.c b/arch/arm/mach-s3c2410/mach-nexcoder.c index d24c242414c..c22f8216032 100644 --- a/arch/arm/mach-s3c2410/mach-nexcoder.c +++ b/arch/arm/mach-s3c2410/mach-nexcoder.c @@ -136,7 +136,7 @@ static void __init nexcoder_sensorboard_init(void) s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); // CAM_GPIO6 => CAM_PWRDN } -void __init nexcoder_map_io(void) +static void __init nexcoder_map_io(void) { s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc)); s3c24xx_init_clocks(0); diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c index d901ed492ff..ad1459e402e 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c2410/mach-otom.c @@ -105,7 +105,7 @@ static struct s3c24xx_board otom11_board __initdata = { }; -void __init otom11_map_io(void) +static void __init otom11_map_io(void) { s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc)); s3c24xx_init_clocks(0); diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2410/mach-rx3715.c index a73d61c1de4..22d9e070fd6 100644 --- a/arch/arm/mach-s3c2410/mach-rx3715.c +++ b/arch/arm/mach-s3c2410/mach-rx3715.c @@ -16,6 +16,7 @@ * 14-Jan-2005 BJD Added new clock init * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA * 14-Mar-2005 BJD Fixed __iomem warnings + * 20-Sep-2005 BJD Added static to non-exported items */ #include <linux/kernel.h> @@ -108,7 +109,7 @@ static struct s3c24xx_board rx3715_board __initdata = { .devices_count = ARRAY_SIZE(rx3715_devices) }; -void __init rx3715_map_io(void) +static void __init rx3715_map_io(void) { s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc)); s3c24xx_init_clocks(16934000); @@ -116,7 +117,7 @@ void __init rx3715_map_io(void) s3c24xx_set_board(&rx3715_board); } -void __init rx3715_init_irq(void) +static void __init rx3715_init_irq(void) { s3c24xx_init_irq(); } diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index 67e903a700d..2eda55a6b67 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -28,6 +28,7 @@ * Ben Dooks <ben@simtec.co.uk> * * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA + * 20-Sep-2005 BJD Added static to non-exported items * ***********************************************************************/ @@ -97,7 +98,7 @@ static struct s3c24xx_board smdk2410_board __initdata = { .devices_count = ARRAY_SIZE(smdk2410_devices) }; -void __init smdk2410_map_io(void) +static void __init smdk2410_map_io(void) { s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc)); s3c24xx_init_clocks(0); @@ -105,7 +106,7 @@ void __init smdk2410_map_io(void) s3c24xx_set_board(&smdk2410_board); } -void __init smdk2410_init_irq(void) +static void __init smdk2410_init_irq(void) { s3c24xx_init_irq(); } diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c index 357522106f6..722ef46b630 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2440.c +++ b/arch/arm/mach-s3c2410/mach-smdk2440.c @@ -18,6 +18,7 @@ * 22-Feb-2005 BJD Updated for 2.6.11-rc5 relesa * 10-Mar-2005 LCVR Replaced S3C2410_VA by S3C24XX_VA * 14-Mar-2005 BJD void __iomem fixes + * 20-Sep-2005 BJD Added static to non-exported items */ #include <linux/kernel.h> @@ -98,7 +99,7 @@ static struct s3c24xx_board smdk2440_board __initdata = { .devices_count = ARRAY_SIZE(smdk2440_devices) }; -void __init smdk2440_map_io(void) +static void __init smdk2440_map_io(void) { s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc)); s3c24xx_init_clocks(16934400); @@ -106,7 +107,7 @@ void __init smdk2440_map_io(void) s3c24xx_set_board(&smdk2440_board); } -void __init smdk2440_machine_init(void) +static void __init smdk2440_machine_init(void) { /* Configure the LEDs (even if we have no LED support)*/ diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 8f9ab2893df..663a7f98fc0 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -28,6 +28,7 @@ * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA * 14-Mar-2006 BJD void __iomem fixes * 22-Jun-2006 BJD Added DM9000 platform information + * 20-Sep-2005 BJD Added static to non-exported items */ #include <linux/kernel.h> @@ -347,7 +348,7 @@ static void vr1000_power_off(void) s3c2410_gpio_setpin(S3C2410_GPB9, 1); } -void __init vr1000_map_io(void) +static void __init vr1000_map_io(void) { /* initialise clock sources */ diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 8cb69113a57..25d6a4e2753 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -111,12 +111,11 @@ static struct mtd_partition collie_partitions[] = { static void collie_set_vpp(int vpp) { - write_scoop_reg(SCOOP_GPCR, read_scoop_reg(SCOOP_GPCR) | COLLIE_SCP_VPEN); - if (vpp) { - write_scoop_reg(SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) | COLLIE_SCP_VPEN); - } else { - write_scoop_reg(SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) & ~COLLIE_SCP_VPEN); - } + write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(SCOOP_GPCR) | COLLIE_SCP_VPEN); + if (vpp) + write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) | COLLIE_SCP_VPEN); + else + write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) & ~COLLIE_SCP_VPEN); } static struct flash_platform_data collie_flash_data = { diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h index 279e3afa3c3..f085d68e568 100644 --- a/arch/arm/mach-sa1100/generic.h +++ b/arch/arm/mach-sa1100/generic.h @@ -39,3 +39,6 @@ extern void sa11x0_set_ssp_data(struct sa11x0_ssp_plat_ops *ops); struct irda_platform_data; void sa11x0_set_irda_data(struct irda_platform_data *irda); + +struct mcp_plat_data; +void sa11x0_set_mcp_data(struct mcp_plat_data *data); diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 0b6c4db44e0..4a884baf3b9 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -233,7 +233,17 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (in_interrupt() || !mm) goto no_context; - down_read(&mm->mmap_sem); + /* + * As per x86, we may deadlock here. However, since the kernel only + * validly references user space from well defined areas of the code, + * we can bug out early if this is from code which shouldn't. + */ + if (!down_read_trylock(&mm->mmap_sem)) { + if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc)) + goto no_context; + down_read(&mm->mmap_sem); + } + fault = __do_page_fault(mm, addr, fsr, tsk); up_read(&mm->mmap_sem); diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 1d739d282a4..82ec954e45b 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -509,7 +509,7 @@ cpu_arm1020_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __arm1020_proc_info,#object __arm1020_proc_info: diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 9b725665b5c..7375fe930f7 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -491,7 +491,7 @@ cpu_arm1020e_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __arm1020e_proc_info,#object __arm1020e_proc_info: diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 37b70fa21c7..6ca639094d6 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -473,7 +473,7 @@ cpu_arm1022_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __arm1022_proc_info,#object __arm1022_proc_info: diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 931b690d1be..10317e4f55d 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -469,7 +469,7 @@ cpu_arm1026_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __arm1026_proc_info,#object __arm1026_proc_info: diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index d0f1bbb48f6..8e7e1e70ab0 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -332,7 +332,7 @@ cpu_arm710_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __arm6_proc_info, #object __arm6_proc_info: diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index c69c9de3239..a13e0184d34 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -222,7 +222,7 @@ cpu_arm720_name: * See linux/include/asm-arm/procinfo.h for a definition of this structure. */ - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __arm710_proc_info, #object __arm710_proc_info: diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 0f490a0fcb7..d1651389999 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -452,7 +452,7 @@ cpu_arm920_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __arm920_proc_info,#object __arm920_proc_info: diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 62bc34a139e..23b8ed97f4e 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -456,7 +456,7 @@ cpu_arm922_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __arm922_proc_info,#object __arm922_proc_info: diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index ee49aa2ca78..ee95c52db51 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -521,7 +521,7 @@ cpu_arm925_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __arm925_proc_info,#object __arm925_proc_info: diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index bb95cc9fed0..7d042dc20c4 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -471,7 +471,7 @@ cpu_arm926_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __arm926_proc_info,#object __arm926_proc_info: diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index 34f7e7d3f41..bd330c4075a 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -249,7 +249,7 @@ cpu_sa110_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __sa110_proc_info,#object __sa110_proc_info: diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index ca14f80d5ab..91b89124c0d 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -280,7 +280,7 @@ cpu_sa1110_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __sa1100_proc_info,#object __sa1100_proc_info: diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index eb34823c9db..caf3b19b167 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -240,7 +240,7 @@ cpu_elf_name: .size cpu_elf_name, . - cpu_elf_name .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr /* * Match any ARMv6 processor core. diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index b88de270014..861b3594728 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -578,7 +578,7 @@ cpu_pxa270_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __80200_proc_info,#object __80200_proc_info: diff --git a/arch/arm26/boot/compressed/hw-bse.c b/arch/arm26/boot/compressed/hw-bse.c deleted file mode 100644 index 3e8f07f8e08..00000000000 --- a/arch/arm26/boot/compressed/hw-bse.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Bright Star Engineering Inc. - * - * code for readng parameters from the - * parameter blocks of the boot block - * flash memory - * - */ - -static int strcmp(const char *s1, const char *s2) -{ - while (*s1 != '\0' && *s1 == *s2) - { - s1++; - s2++; - } - - return (*(unsigned char *) s1) - (*(unsigned char *) s2); -} - -struct pblk_t { - char type; - unsigned short size; -}; - -static char *bse_getflashparam(char *name) { - unsigned int esize; - char *q,*r; - unsigned char *p,*e; - struct pblk_t *thepb = (struct pblk_t *) 0x00004000; - struct pblk_t *altpb = (struct pblk_t *) 0x00006000; - if (thepb->type&1) { - if (altpb->type&1) { - /* no valid param block */ - return (char*)0; - } else { - /* altpb is valid */ - struct pblk_t *tmp; - tmp = thepb; - thepb = altpb; - altpb = tmp; - } - } - p = (char*)thepb + sizeof(struct pblk_t); - e = p + thepb->size; - while (p < e) { - q = p; - esize = *p; - if (esize == 0xFF) break; - if (esize == 0) break; - if (esize > 127) { - esize = (esize&0x7F)<<8 | p[1]; - q++; - } - q++; - r=q; - if (*r && ((name == 0) || (!strcmp(name,r)))) { - while (*q++) ; - return q; - } - p+=esize; - } - return (char*)0; -} - -void bse_setup(void) { - /* extract the linux cmdline from flash */ - char *name=bse_getflashparam("linuxboot"); - char *x = (char *)0xc0000100; - if (name) { - while (*name) *x++=*name++; - } - *x=0; -} diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index b22f003eaa6..d2703cda61e 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -908,11 +908,6 @@ config IRQBALANCE The default yes will allow the kernel to do irq load balancing. Saying no will keep the kernel from doing irq load balancing. -config HAVE_DEC_LOCK - bool - depends on (SMP || PREEMPT) && X86_CMPXCHG - default y - # turning this on wastes a bunch of space. # Summit needs it only when NUMA is on config BOOT_IOREMAP diff --git a/arch/i386/kernel/acpi/earlyquirk.c b/arch/i386/kernel/acpi/earlyquirk.c index 1ae2aeeda18..f1b9d2a46da 100644 --- a/arch/i386/kernel/acpi/earlyquirk.c +++ b/arch/i386/kernel/acpi/earlyquirk.c @@ -7,7 +7,6 @@ #include <linux/pci.h> #include <asm/pci-direct.h> #include <asm/acpi.h> -#include <asm/apic.h> static int __init check_bridge(int vendor, int device) { @@ -16,15 +15,6 @@ static int __init check_bridge(int vendor, int device) if (vendor == PCI_VENDOR_ID_NVIDIA) { acpi_skip_timer_override = 1; } -#ifdef CONFIG_X86_LOCAL_APIC - /* - * ATI IXP chipsets get double timer interrupts. - * For now just do this for all ATI chipsets. - * FIXME: this needs to be checked for the non ACPI case too. - */ - if (vendor == PCI_VENDOR_ID_ATI) - disable_timer_pin_1 = 1; -#endif return 0; } diff --git a/arch/i386/lib/Makefile b/arch/i386/lib/Makefile index 7b1932d20f9..914933e9ec3 100644 --- a/arch/i386/lib/Makefile +++ b/arch/i386/lib/Makefile @@ -7,4 +7,3 @@ lib-y = checksum.o delay.o usercopy.o getuser.o putuser.o memcpy.o strstr.o \ bitops.o lib-$(CONFIG_X86_USE_3DNOW) += mmx.o -lib-$(CONFIG_HAVE_DEC_LOCK) += dec_and_lock.o diff --git a/arch/i386/lib/dec_and_lock.c b/arch/i386/lib/dec_and_lock.c deleted file mode 100644 index 8b81b2524fa..00000000000 --- a/arch/i386/lib/dec_and_lock.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * x86 version of "atomic_dec_and_lock()" using - * the atomic "cmpxchg" instruction. - * - * (For CPU's lacking cmpxchg, we use the slow - * generic version, and this one never even gets - * compiled). - */ - -#include <linux/spinlock.h> -#include <linux/module.h> -#include <asm/atomic.h> - -int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock) -{ - int counter; - int newcount; - -repeat: - counter = atomic_read(atomic); - newcount = counter-1; - - if (!newcount) - goto slow_path; - - asm volatile("lock; cmpxchgl %1,%2" - :"=a" (newcount) - :"r" (newcount), "m" (atomic->counter), "0" (counter)); - - /* If the above failed, "eax" will have changed */ - if (newcount != counter) - goto repeat; - return 0; - -slow_path: - spin_lock(lock); - if (atomic_dec_and_test(atomic)) - return 1; - spin_unlock(lock); - return 0; -} -EXPORT_SYMBOL(_atomic_dec_and_lock); diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index ed25d66c8d5..945c15a0722 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -298,11 +298,6 @@ config PREEMPT source "mm/Kconfig" -config HAVE_DEC_LOCK - bool - depends on (SMP || PREEMPT) - default y - config IA32_SUPPORT bool "Support for Linux/x86 binaries" help diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile index 70f8ed2748d..67932ad5308 100644 --- a/arch/ia64/Makefile +++ b/arch/ia64/Makefile @@ -82,17 +82,7 @@ unwcheck: vmlinux archclean: $(Q)$(MAKE) $(clean)=$(boot) -archprepare: include/asm-ia64/.offsets.h.stamp - -include/asm-ia64/.offsets.h.stamp: - mkdir -p include/asm-ia64 - [ -s include/asm-ia64/asm-offsets.h ] \ - || echo "#define IA64_TASK_SIZE 0" > include/asm-ia64/asm-offsets.h - touch $@ - - - -CLEAN_FILES += vmlinux.gz bootloader include/asm-ia64/.offsets.h.stamp +CLEAN_FILES += vmlinux.gz bootloader boot: lib/lib.a vmlinux $(Q)$(MAKE) $(build)=$(boot) $@ diff --git a/arch/ia64/ia32/binfmt_elf32.c b/arch/ia64/ia32/binfmt_elf32.c index 31de70b7c67..a7280d9f6c1 100644 --- a/arch/ia64/ia32/binfmt_elf32.c +++ b/arch/ia64/ia32/binfmt_elf32.c @@ -216,12 +216,6 @@ ia32_setup_arg_pages (struct linux_binprm *bprm, int executable_stack) if (!mpnt) return -ENOMEM; - if (security_vm_enough_memory((IA32_STACK_TOP - (PAGE_MASK & (unsigned long) bprm->p)) - >> PAGE_SHIFT)) { - kmem_cache_free(vm_area_cachep, mpnt); - return -ENOMEM; - } - memset(mpnt, 0, sizeof(*mpnt)); down_write(¤t->mm->mmap_sem); diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 28a4529fdd6..7e926471e4e 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -899,7 +899,7 @@ int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) if ((err = iosapic_init(phys_addr, gsi_base))) return err; -#if CONFIG_ACPI_NUMA +#ifdef CONFIG_ACPI_NUMA acpi_map_iosapic(handle, 0, NULL, NULL); #endif /* CONFIG_ACPI_NUMA */ diff --git a/arch/ia64/kernel/asm-offsets.c b/arch/ia64/kernel/asm-offsets.c index f6a23428934..77225659e96 100644 --- a/arch/ia64/kernel/asm-offsets.c +++ b/arch/ia64/kernel/asm-offsets.c @@ -4,6 +4,7 @@ * to extract and format the required data. */ +#define ASM_OFFSETS_C 1 #include <linux/config.h> #include <linux/sched.h> diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index ba0b6a1f429..0741b066b98 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -491,7 +491,7 @@ GLOBAL_ENTRY(prefetch_stack) ;; lfetch.fault [r16], 128 br.ret.sptk.many rp -END(prefetch_switch_stack) +END(prefetch_stack) GLOBAL_ENTRY(execve) mov r15=__NR_execve // put syscall number in place diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c index 6e683745af4..80f83d6cdbf 100644 --- a/arch/ia64/kernel/mca_drv.c +++ b/arch/ia64/kernel/mca_drv.c @@ -84,23 +84,23 @@ mca_page_isolate(unsigned long paddr) struct page *p; /* whether physical address is valid or not */ - if ( !ia64_phys_addr_valid(paddr) ) + if (!ia64_phys_addr_valid(paddr)) return ISOLATE_NG; /* convert physical address to physical page number */ p = pfn_to_page(paddr>>PAGE_SHIFT); /* check whether a page number have been already registered or not */ - for( i = 0; i < num_page_isolate; i++ ) - if( page_isolate[i] == p ) + for (i = 0; i < num_page_isolate; i++) + if (page_isolate[i] == p) return ISOLATE_OK; /* already listed */ /* limitation check */ - if( num_page_isolate == MAX_PAGE_ISOLATE ) + if (num_page_isolate == MAX_PAGE_ISOLATE) return ISOLATE_NG; /* kick pages having attribute 'SLAB' or 'Reserved' */ - if( PageSlab(p) || PageReserved(p) ) + if (PageSlab(p) || PageReserved(p)) return ISOLATE_NG; /* add attribute 'Reserved' and register the page */ @@ -139,10 +139,10 @@ mca_handler_bh(unsigned long paddr) * @peidx: pointer to index of processor error section */ -static void +static void mca_make_peidx(sal_log_processor_info_t *slpi, peidx_table_t *peidx) { - /* + /* * calculate the start address of * "struct cpuid_info" and "sal_processor_static_info_t". */ @@ -164,7 +164,7 @@ mca_make_peidx(sal_log_processor_info_t *slpi, peidx_table_t *peidx) } /** - * mca_make_slidx - Make index of SAL error record + * mca_make_slidx - Make index of SAL error record * @buffer: pointer to SAL error record * @slidx: pointer to index of SAL error record * @@ -172,12 +172,12 @@ mca_make_peidx(sal_log_processor_info_t *slpi, peidx_table_t *peidx) * 1 if record has platform error / 0 if not */ #define LOG_INDEX_ADD_SECT_PTR(sect, ptr) \ - { slidx_list_t *hl = &slidx_pool.buffer[slidx_pool.cur_idx]; \ - hl->hdr = ptr; \ - list_add(&hl->list, &(sect)); \ - slidx_pool.cur_idx = (slidx_pool.cur_idx + 1)%slidx_pool.max_idx; } + {slidx_list_t *hl = &slidx_pool.buffer[slidx_pool.cur_idx]; \ + hl->hdr = ptr; \ + list_add(&hl->list, &(sect)); \ + slidx_pool.cur_idx = (slidx_pool.cur_idx + 1)%slidx_pool.max_idx; } -static int +static int mca_make_slidx(void *buffer, slidx_table_t *slidx) { int platform_err = 0; @@ -214,28 +214,36 @@ mca_make_slidx(void *buffer, slidx_table_t *slidx) sp = (sal_log_section_hdr_t *)((char*)buffer + ercd_pos); if (!efi_guidcmp(sp->guid, SAL_PROC_DEV_ERR_SECT_GUID)) { LOG_INDEX_ADD_SECT_PTR(slidx->proc_err, sp); - } else if (!efi_guidcmp(sp->guid, SAL_PLAT_MEM_DEV_ERR_SECT_GUID)) { + } else if (!efi_guidcmp(sp->guid, + SAL_PLAT_MEM_DEV_ERR_SECT_GUID)) { platform_err = 1; LOG_INDEX_ADD_SECT_PTR(slidx->mem_dev_err, sp); - } else if (!efi_guidcmp(sp->guid, SAL_PLAT_SEL_DEV_ERR_SECT_GUID)) { + } else if (!efi_guidcmp(sp->guid, + SAL_PLAT_SEL_DEV_ERR_SECT_GUID)) { platform_err = 1; LOG_INDEX_ADD_SECT_PTR(slidx->sel_dev_err, sp); - } else if (!efi_guidcmp(sp->guid, SAL_PLAT_PCI_BUS_ERR_SECT_GUID)) { + } else if (!efi_guidcmp(sp->guid, + SAL_PLAT_PCI_BUS_ERR_SECT_GUID)) { platform_err = 1; LOG_INDEX_ADD_SECT_PTR(slidx->pci_bus_err, sp); - } else if (!efi_guidcmp(sp->guid, SAL_PLAT_SMBIOS_DEV_ERR_SECT_GUID)) { + } else if (!efi_guidcmp(sp->guid, + SAL_PLAT_SMBIOS_DEV_ERR_SECT_GUID)) { platform_err = 1; LOG_INDEX_ADD_SECT_PTR(slidx->smbios_dev_err, sp); - } else if (!efi_guidcmp(sp->guid, SAL_PLAT_PCI_COMP_ERR_SECT_GUID)) { + } else if (!efi_guidcmp(sp->guid, + SAL_PLAT_PCI_COMP_ERR_SECT_GUID)) { platform_err = 1; LOG_INDEX_ADD_SECT_PTR(slidx->pci_comp_err, sp); - } else if (!efi_guidcmp(sp->guid, SAL_PLAT_SPECIFIC_ERR_SECT_GUID)) { + } else if (!efi_guidcmp(sp->guid, + SAL_PLAT_SPECIFIC_ERR_SECT_GUID)) { platform_err = 1; LOG_INDEX_ADD_SECT_PTR(slidx->plat_specific_err, sp); - } else if (!efi_guidcmp(sp->guid, SAL_PLAT_HOST_CTLR_ERR_SECT_GUID)) { + } else if (!efi_guidcmp(sp->guid, + SAL_PLAT_HOST_CTLR_ERR_SECT_GUID)) { platform_err = 1; LOG_INDEX_ADD_SECT_PTR(slidx->host_ctlr_err, sp); - } else if (!efi_guidcmp(sp->guid, SAL_PLAT_BUS_ERR_SECT_GUID)) { + } else if (!efi_guidcmp(sp->guid, + SAL_PLAT_BUS_ERR_SECT_GUID)) { platform_err = 1; LOG_INDEX_ADD_SECT_PTR(slidx->plat_bus_err, sp); } else { @@ -253,15 +261,16 @@ mca_make_slidx(void *buffer, slidx_table_t *slidx) * Return value: * 0 on Success / -ENOMEM on Failure */ -static int +static int init_record_index_pools(void) { int i; int rec_max_size; /* Maximum size of SAL error records */ int sect_min_size; /* Minimum size of SAL error sections */ /* minimum size table of each section */ - static int sal_log_sect_min_sizes[] = { - sizeof(sal_log_processor_info_t) + sizeof(sal_processor_static_info_t), + static int sal_log_sect_min_sizes[] = { + sizeof(sal_log_processor_info_t) + + sizeof(sal_processor_static_info_t), sizeof(sal_log_mem_dev_err_info_t), sizeof(sal_log_sel_dev_err_info_t), sizeof(sal_log_pci_bus_err_info_t), @@ -294,7 +303,8 @@ init_record_index_pools(void) /* - 3 - */ slidx_pool.max_idx = (rec_max_size/sect_min_size) * 2 + 1; - slidx_pool.buffer = (slidx_list_t *) kmalloc(slidx_pool.max_idx * sizeof(slidx_list_t), GFP_KERNEL); + slidx_pool.buffer = (slidx_list_t *) + kmalloc(slidx_pool.max_idx * sizeof(slidx_list_t), GFP_KERNEL); return slidx_pool.buffer ? 0 : -ENOMEM; } @@ -308,6 +318,7 @@ init_record_index_pools(void) * is_mca_global - Check whether this MCA is global or not * @peidx: pointer of index of processor error section * @pbci: pointer to pal_bus_check_info_t + * @sos: pointer to hand off struct between SAL and OS * * Return value: * MCA_IS_LOCAL / MCA_IS_GLOBAL @@ -317,11 +328,12 @@ static mca_type_t is_mca_global(peidx_table_t *peidx, pal_bus_check_info_t *pbci, struct ia64_sal_os_state *sos) { - pal_processor_state_info_t *psp = (pal_processor_state_info_t*)peidx_psp(peidx); + pal_processor_state_info_t *psp = + (pal_processor_state_info_t*)peidx_psp(peidx); - /* + /* * PAL can request a rendezvous, if the MCA has a global scope. - * If "rz_always" flag is set, SAL requests MCA rendezvous + * If "rz_always" flag is set, SAL requests MCA rendezvous * in spite of global MCA. * Therefore it is local MCA when rendezvous has not been requested. * Failed to rendezvous, the system must be down. @@ -381,13 +393,15 @@ is_mca_global(peidx_table_t *peidx, pal_bus_check_info_t *pbci, * @slidx: pointer of index of SAL error record * @peidx: pointer of index of processor error section * @pbci: pointer of pal_bus_check_info + * @sos: pointer to hand off struct between SAL and OS * * Return value: * 1 on Success / 0 on Failure */ static int -recover_from_read_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_check_info_t *pbci, +recover_from_read_error(slidx_table_t *slidx, + peidx_table_t *peidx, pal_bus_check_info_t *pbci, struct ia64_sal_os_state *sos) { sal_log_mod_error_info_t *smei; @@ -453,24 +467,28 @@ recover_from_read_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_chec * @slidx: pointer of index of SAL error record * @peidx: pointer of index of processor error section * @pbci: pointer of pal_bus_check_info + * @sos: pointer to hand off struct between SAL and OS * * Return value: * 1 on Success / 0 on Failure */ static int -recover_from_platform_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_check_info_t *pbci, +recover_from_platform_error(slidx_table_t *slidx, peidx_table_t *peidx, + pal_bus_check_info_t *pbci, struct ia64_sal_os_state *sos) { int status = 0; - pal_processor_state_info_t *psp = (pal_processor_state_info_t*)peidx_psp(peidx); + pal_processor_state_info_t *psp = + (pal_processor_state_info_t*)peidx_psp(peidx); if (psp->bc && pbci->eb && pbci->bsi == 0) { switch(pbci->type) { case 1: /* partial read */ case 3: /* full line(cpu) read */ case 9: /* I/O space read */ - status = recover_from_read_error(slidx, peidx, pbci, sos); + status = recover_from_read_error(slidx, peidx, pbci, + sos); break; case 0: /* unknown */ case 2: /* partial write */ @@ -481,7 +499,8 @@ recover_from_platform_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_ case 8: /* write coalescing transactions */ case 10: /* I/O space write */ case 11: /* inter-processor interrupt message(IPI) */ - case 12: /* interrupt acknowledge or external task priority cycle */ + case 12: /* interrupt acknowledge or + external task priority cycle */ default: break; } @@ -496,6 +515,7 @@ recover_from_platform_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_ * @slidx: pointer of index of SAL error record * @peidx: pointer of index of processor error section * @pbci: pointer of pal_bus_check_info + * @sos: pointer to hand off struct between SAL and OS * * Return value: * 1 on Success / 0 on Failure @@ -509,15 +529,17 @@ recover_from_platform_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_ */ static int -recover_from_processor_error(int platform, slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_check_info_t *pbci, +recover_from_processor_error(int platform, slidx_table_t *slidx, + peidx_table_t *peidx, pal_bus_check_info_t *pbci, struct ia64_sal_os_state *sos) { - pal_processor_state_info_t *psp = (pal_processor_state_info_t*)peidx_psp(peidx); + pal_processor_state_info_t *psp = + (pal_processor_state_info_t*)peidx_psp(peidx); - /* + /* * We cannot recover errors with other than bus_check. */ - if (psp->cc || psp->rc || psp->uc) + if (psp->cc || psp->rc || psp->uc) return 0; /* @@ -546,10 +568,10 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, peidx_table_t * * (e.g. a load from poisoned memory) * This means "there are some platform errors". */ - if (platform) + if (platform) return recover_from_platform_error(slidx, peidx, pbci, sos); - /* - * On account of strange SAL error record, we cannot recover. + /* + * On account of strange SAL error record, we cannot recover. */ return 0; } @@ -557,14 +579,14 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, peidx_table_t * /** * mca_try_to_recover - Try to recover from MCA * @rec: pointer to a SAL error record + * @sos: pointer to hand off struct between SAL and OS * * Return value: * 1 on Success / 0 on Failure */ static int -mca_try_to_recover(void *rec, - struct ia64_sal_os_state *sos) +mca_try_to_recover(void *rec, struct ia64_sal_os_state *sos) { int platform_err; int n_proc_err; @@ -588,7 +610,8 @@ mca_try_to_recover(void *rec, } /* Make index of processor error section */ - mca_make_peidx((sal_log_processor_info_t*)slidx_first_entry(&slidx.proc_err)->hdr, &peidx); + mca_make_peidx((sal_log_processor_info_t*) + slidx_first_entry(&slidx.proc_err)->hdr, &peidx); /* Extract Processor BUS_CHECK[0] */ *((u64*)&pbci) = peidx_check_info(&peidx, bus_check, 0); @@ -598,7 +621,8 @@ mca_try_to_recover(void *rec, return 0; /* Try to recover a processor error */ - return recover_from_processor_error(platform_err, &slidx, &peidx, &pbci, sos); + return recover_from_processor_error(platform_err, &slidx, &peidx, + &pbci, sos); } /* @@ -611,7 +635,7 @@ int __init mca_external_handler_init(void) return -ENOMEM; /* register external mca handlers */ - if (ia64_reg_MCA_extension(mca_try_to_recover)){ + if (ia64_reg_MCA_extension(mca_try_to_recover)) { printk(KERN_ERR "ia64_reg_MCA_extension failed.\n"); kfree(slidx_pool.buffer); return -EFAULT; diff --git a/arch/ia64/kernel/mca_drv.h b/arch/ia64/kernel/mca_drv.h index 0227b761f2c..e2f6fa1e0ef 100644 --- a/arch/ia64/kernel/mca_drv.h +++ b/arch/ia64/kernel/mca_drv.h @@ -6,7 +6,7 @@ * Copyright (C) Hidetoshi Seto (seto.hidetoshi@jp.fujitsu.com) */ /* - * Processor error section: + * Processor error section: * * +-sal_log_processor_info_t *info-------------+ * | sal_log_section_hdr_t header; | diff --git a/arch/ia64/kernel/mca_drv_asm.S b/arch/ia64/kernel/mca_drv_asm.S index 2d7e0217638..3f298ee4d00 100644 --- a/arch/ia64/kernel/mca_drv_asm.S +++ b/arch/ia64/kernel/mca_drv_asm.S @@ -13,45 +13,45 @@ #include <asm/ptrace.h> GLOBAL_ENTRY(mca_handler_bhhook) - invala // clear RSE ? - ;; // - cover // - ;; // - clrrrb // + invala // clear RSE ? + ;; + cover + ;; + clrrrb ;; - alloc r16=ar.pfs,0,2,1,0 // make a new frame + alloc r16=ar.pfs,0,2,1,0 // make a new frame ;; - mov ar.rsc=0 + mov ar.rsc=0 ;; - mov r13=IA64_KR(CURRENT) // current task pointer + mov r13=IA64_KR(CURRENT) // current task pointer ;; - mov r2=r13 + mov r2=r13 ;; - addl r22=IA64_RBS_OFFSET,r2 + addl r22=IA64_RBS_OFFSET,r2 ;; - mov ar.bspstore=r22 + mov ar.bspstore=r22 ;; - addl sp=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r2 + addl sp=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r2 ;; - adds r2=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13 + adds r2=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13 ;; - st1 [r2]=r0 // clear current->thread.on_ustack flag - mov loc0=r16 - movl loc1=mca_handler_bh // recovery C function + st1 [r2]=r0 // clear current->thread.on_ustack flag + mov loc0=r16 + movl loc1=mca_handler_bh // recovery C function ;; - mov out0=r8 // poisoned address - mov b6=loc1 + mov out0=r8 // poisoned address + mov b6=loc1 ;; - mov loc1=rp + mov loc1=rp ;; - ssm psr.i + ssm psr.i ;; - br.call.sptk.many rp=b6 // does not return ... + br.call.sptk.many rp=b6 // does not return ... ;; - mov ar.pfs=loc0 - mov rp=loc1 + mov ar.pfs=loc0 + mov rp=loc1 ;; - mov r8=r0 + mov r8=r0 br.ret.sptk.many rp ;; END(mca_handler_bhhook) diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 1650353e3f7..d71731ee5b6 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -574,7 +574,7 @@ pfm_protect_ctx_ctxsw(pfm_context_t *x) return 0UL; } -static inline unsigned long +static inline void pfm_unprotect_ctx_ctxsw(pfm_context_t *x, unsigned long f) { spin_unlock(&(x)->ctx_lock); @@ -2218,12 +2218,13 @@ static void pfm_free_fd(int fd, struct file *file) { struct files_struct *files = current->files; - struct fdtable *fdt = files_fdtable(files); + struct fdtable *fdt; /* * there ie no fd_uninstall(), so we do it here */ spin_lock(&files->file_lock); + fdt = files_fdtable(files); rcu_assign_pointer(fdt->fd[fd], NULL); spin_unlock(&files->file_lock); diff --git a/arch/ia64/lib/Makefile b/arch/ia64/lib/Makefile index 799407e7726..cb1af597370 100644 --- a/arch/ia64/lib/Makefile +++ b/arch/ia64/lib/Makefile @@ -15,7 +15,6 @@ lib-$(CONFIG_ITANIUM) += copy_page.o copy_user.o memcpy.o lib-$(CONFIG_MCKINLEY) += copy_page_mck.o memcpy_mck.o lib-$(CONFIG_PERFMON) += carta_random.o lib-$(CONFIG_MD_RAID5) += xor.o -lib-$(CONFIG_HAVE_DEC_LOCK) += dec_and_lock.o AFLAGS___divdi3.o = AFLAGS___udivdi3.o = -DUNSIGNED diff --git a/arch/ia64/lib/dec_and_lock.c b/arch/ia64/lib/dec_and_lock.c deleted file mode 100644 index c7ce92f968f..00000000000 --- a/arch/ia64/lib/dec_and_lock.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2003 Jerome Marchand, Bull S.A. - * Cleaned up by David Mosberger-Tang <davidm@hpl.hp.com> - * - * This file is released under the GPLv2, or at your option any later version. - * - * ia64 version of "atomic_dec_and_lock()" using the atomic "cmpxchg" instruction. This - * code is an adaptation of the x86 version of "atomic_dec_and_lock()". - */ - -#include <linux/compiler.h> -#include <linux/module.h> -#include <linux/spinlock.h> -#include <asm/atomic.h> - -/* - * Decrement REFCOUNT and if the count reaches zero, acquire the spinlock. Both of these - * operations have to be done atomically, so that the count doesn't drop to zero without - * acquiring the spinlock first. - */ -int -_atomic_dec_and_lock (atomic_t *refcount, spinlock_t *lock) -{ - int old, new; - - do { - old = atomic_read(refcount); - new = old - 1; - - if (unlikely (old == 1)) { - /* oops, we may be decrementing to zero, do it the slow way... */ - spin_lock(lock); - if (atomic_dec_and_test(refcount)) - return 1; - spin_unlock(lock); - return 0; - } - } while (cmpxchg(&refcount->counter, old, new) != old); - return 0; -} - -EXPORT_SYMBOL(_atomic_dec_and_lock); diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index 1ef3987ebc6..4d100f3886e 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -220,11 +220,6 @@ config PREEMPT Say Y here if you are building a kernel for a desktop, embedded or real-time system. Say N if you are unsure. -config HAVE_DEC_LOCK - bool - depends on (SMP || PREEMPT) - default n - config SMP bool "Symmetric multi-processing support" ---help--- diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 0eb71ac303a..4cd724c0570 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1009,10 +1009,6 @@ config GENERIC_CALIBRATE_DELAY bool default y -config HAVE_DEC_LOCK - bool - default y - # # Select some configuration options automatically based on user selections. # diff --git a/arch/mips/kernel/sysirix.c b/arch/mips/kernel/sysirix.c index 4de155699c4..7ae4af47697 100644 --- a/arch/mips/kernel/sysirix.c +++ b/arch/mips/kernel/sysirix.c @@ -581,18 +581,13 @@ asmlinkage int irix_brk(unsigned long brk) } /* - * Check if we have enough memory.. + * Ok, looks good - let it rip. */ - if (security_vm_enough_memory((newbrk-oldbrk) >> PAGE_SHIFT)) { + if (do_brk(oldbrk, newbrk-oldbrk) != oldbrk) { ret = -ENOMEM; goto out; } - - /* - * Ok, looks good - let it rip. - */ mm->brk = brk; - do_brk(oldbrk, newbrk-oldbrk); ret = 0; out: diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index 21b92b9dd01..03730341290 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -2,7 +2,7 @@ # Makefile for MIPS-specific library files.. # -lib-y += csum_partial_copy.o dec_and_lock.o memcpy.o promlib.o \ +lib-y += csum_partial_copy.o memcpy.o promlib.o \ strlen_user.o strncpy_user.o strnlen_user.o obj-y += iomap.o diff --git a/arch/mips/lib/dec_and_lock.c b/arch/mips/lib/dec_and_lock.c deleted file mode 100644 index fd82c84a93b..00000000000 --- a/arch/mips/lib/dec_and_lock.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * MIPS version of atomic_dec_and_lock() using cmpxchg - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/module.h> -#include <linux/spinlock.h> -#include <asm/atomic.h> -#include <asm/system.h> - -/* - * This is an implementation of the notion of "decrement a - * reference count, and return locked if it decremented to zero". - * - * This implementation can be used on any architecture that - * has a cmpxchg, and where atomic->value is an int holding - * the value of the atomic (i.e. the high bits aren't used - * for a lock or anything like that). - */ -int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock) -{ - int counter; - int newcount; - - for (;;) { - counter = atomic_read(atomic); - newcount = counter - 1; - if (!newcount) - break; /* do it the slow way */ - - newcount = cmpxchg(&atomic->counter, counter, newcount); - if (newcount == counter) - return 0; - } - - spin_lock(lock); - if (atomic_dec_and_test(atomic)) - return 1; - spin_unlock(lock); - return 0; -} - -EXPORT_SYMBOL(_atomic_dec_and_lock); diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 347ea284140..776941c7567 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -26,10 +26,6 @@ config GENERIC_CALIBRATE_DELAY bool default y -config HAVE_DEC_LOCK - bool - default y - config PPC bool default y diff --git a/arch/ppc/lib/Makefile b/arch/ppc/lib/Makefile index f1e1fb4144f..50358e4ea15 100644 --- a/arch/ppc/lib/Makefile +++ b/arch/ppc/lib/Makefile @@ -2,7 +2,7 @@ # Makefile for ppc-specific library files.. # -obj-y := checksum.o string.o strcase.o dec_and_lock.o div64.o +obj-y := checksum.o string.o strcase.o div64.o obj-$(CONFIG_8xx) += rheap.o obj-$(CONFIG_CPM2) += rheap.o diff --git a/arch/ppc/lib/dec_and_lock.c b/arch/ppc/lib/dec_and_lock.c deleted file mode 100644 index b18f0d9a00f..00000000000 --- a/arch/ppc/lib/dec_and_lock.c +++ /dev/null @@ -1,38 +0,0 @@ -#include <linux/module.h> -#include <linux/spinlock.h> -#include <asm/atomic.h> -#include <asm/system.h> - -/* - * This is an implementation of the notion of "decrement a - * reference count, and return locked if it decremented to zero". - * - * This implementation can be used on any architecture that - * has a cmpxchg, and where atomic->value is an int holding - * the value of the atomic (i.e. the high bits aren't used - * for a lock or anything like that). - */ -int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock) -{ - int counter; - int newcount; - - for (;;) { - counter = atomic_read(atomic); - newcount = counter - 1; - if (!newcount) - break; /* do it the slow way */ - - newcount = cmpxchg(&atomic->counter, counter, newcount); - if (newcount == counter) - return 0; - } - - spin_lock(lock); - if (atomic_dec_and_test(atomic)) - return 1; - spin_unlock(lock); - return 0; -} - -EXPORT_SYMBOL(_atomic_dec_and_lock); diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index 8b9b226005d..b8d08f33f7e 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -34,7 +34,8 @@ ifeq ($(CONFIG_40x),y) obj-$(CONFIG_PCI) += indirect_pci.o pci_auto.o ppc405_pci.o endif endif -obj-$(CONFIG_8xx) += m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y) +obj-$(CONFIG_8xx) += m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y) \ + ppc_sys.o mpc8xx_devices.o mpc8xx_sys.o ifeq ($(CONFIG_8xx),y) obj-$(CONFIG_PCI) += qspan_pci.o i8259.o endif diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c new file mode 100644 index 00000000000..2b5f0e70168 --- /dev/null +++ b/arch/ppc/syslib/mpc8xx_devices.c @@ -0,0 +1,224 @@ +/* + * arch/ppc/syslib/mpc8xx_devices.c + * + * MPC8xx Device descriptions + * + * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * + * Copyright 2005 MontaVista Software, Inc. by Vitaly Bordug<vbordug@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/serial_8250.h> +#include <linux/mii.h> +#include <asm/commproc.h> +#include <asm/mpc8xx.h> +#include <asm/irq.h> +#include <asm/ppc_sys.h> + +/* We use offsets for IORESOURCE_MEM to do not set dependences at compile time. + * They will get fixed up by mach_mpc8xx_fixup + */ + +struct platform_device ppc_sys_platform_devices[] = { + [MPC8xx_CPM_FEC1] = { + .name = "fsl-cpm-fec", + .id = 1, + .num_resources = 2, + .resource = (struct resource[]) { + { + .name = "regs", + .start = 0xe00, + .end = 0xe88, + .flags = IORESOURCE_MEM, + }, + { + .name = "interrupt", + .start = MPC8xx_INT_FEC1, + .end = MPC8xx_INT_FEC1, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC8xx_CPM_FEC2] = { + .name = "fsl-cpm-fec", + .id = 2, + .num_resources = 2, + .resource = (struct resource[]) { + { + .name = "regs", + .start = 0x1e00, + .end = 0x1e88, + .flags = IORESOURCE_MEM, + }, + { + .name = "interrupt", + .start = MPC8xx_INT_FEC2, + .end = MPC8xx_INT_FEC2, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC8xx_CPM_SCC1] = { + .name = "fsl-cpm-scc", + .id = 1, + .num_resources = 3, + .resource = (struct resource[]) { + { + .name = "regs", + .start = 0xa00, + .end = 0xa18, + .flags = IORESOURCE_MEM, + }, + { + .name = "pram", + .start = 0x3c00, + .end = 0x3c80, + .flags = IORESOURCE_MEM, + }, + { + .name = "interrupt", + .start = MPC8xx_INT_SCC1, + .end = MPC8xx_INT_SCC1, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC8xx_CPM_SCC2] = { + .name = "fsl-cpm-scc", + .id = 2, + .num_resources = 3, + .resource = (struct resource[]) { + { + .name = "regs", + .start = 0xa20, + .end = 0xa38, + .flags = IORESOURCE_MEM, + }, + { + .name = "pram", + .start = 0x3d00, + .end = 0x3d80, + .flags = IORESOURCE_MEM, + }, + + { + .name = "interrupt", + .start = MPC8xx_INT_SCC2, + .end = MPC8xx_INT_SCC2, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC8xx_CPM_SCC3] = { + .name = "fsl-cpm-scc", + .id = 3, + .num_resources = 3, + .resource = (struct resource[]) { + { + .name = "regs", + .start = 0xa40, + .end = 0xa58, + .flags = IORESOURCE_MEM, + }, + { + .name = "pram", + .start = 0x3e00, + .end = 0x3e80, + .flags = IORESOURCE_MEM, + }, + + { + .name = "interrupt", + .start = MPC8xx_INT_SCC3, + .end = MPC8xx_INT_SCC3, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC8xx_CPM_SCC4] = { + .name = "fsl-cpm-scc", + .id = 4, + .num_resources = 3, + .resource = (struct resource[]) { + { + .name = "regs", + .start = 0xa60, + .end = 0xa78, + .flags = IORESOURCE_MEM, + }, + { + .name = "pram", + .start = 0x3f00, + .end = 0x3f80, + .flags = IORESOURCE_MEM, + }, + + { + .name = "interrupt", + .start = MPC8xx_INT_SCC4, + .end = MPC8xx_INT_SCC4, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC8xx_CPM_SMC1] = { + .name = "fsl-cpm-smc", + .id = 1, + .num_resources = 2, + .resource = (struct resource[]) { + { + .name = "regs", + .start = 0xa82, + .end = 0xa91, + .flags = IORESOURCE_MEM, + }, + { + .name = "interrupt", + .start = MPC8xx_INT_SMC1, + .end = MPC8xx_INT_SMC1, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC8xx_CPM_SMC2] = { + .name = "fsl-cpm-smc", + .id = 2, + .num_resources = 2, + .resource = (struct resource[]) { + { + .name = "regs", + .start = 0xa92, + .end = 0xaa1, + .flags = IORESOURCE_MEM, + }, + { + .name = "interrupt", + .start = MPC8xx_INT_SMC2, + .end = MPC8xx_INT_SMC2, + .flags = IORESOURCE_IRQ, + }, + }, + }, +}; + +static int __init mach_mpc8xx_fixup(struct platform_device *pdev) +{ + ppc_sys_fixup_mem_resource (pdev, IMAP_ADDR); + return 0; +} + +static int __init mach_mpc8xx_init(void) +{ + ppc_sys_device_fixup = mach_mpc8xx_fixup; + return 0; +} + +postcore_initcall(mach_mpc8xx_init); diff --git a/arch/ppc/syslib/mpc8xx_sys.c b/arch/ppc/syslib/mpc8xx_sys.c new file mode 100644 index 00000000000..a532ccc861c --- /dev/null +++ b/arch/ppc/syslib/mpc8xx_sys.c @@ -0,0 +1,61 @@ +/* + * arch/ppc/platforms/mpc8xx_sys.c + * + * MPC8xx System descriptions + * + * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * + * Copyright 2005 MontaVista Software, Inc. by Vitaly Bordug <vbordug@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <asm/ppc_sys.h> + +struct ppc_sys_spec *cur_ppc_sys_spec; +struct ppc_sys_spec ppc_sys_specs[] = { + { + .ppc_sys_name = "MPC86X", + .mask = 0xFFFFFFFF, + .value = 0x00000000, + .num_devices = 2, + .device_list = (enum ppc_sys_devices[]) + { + MPC8xx_CPM_FEC1, + MPC8xx_CPM_SCC1, + MPC8xx_CPM_SCC2, + MPC8xx_CPM_SCC3, + MPC8xx_CPM_SCC4, + MPC8xx_CPM_SMC1, + MPC8xx_CPM_SMC2, + }, + }, + { + .ppc_sys_name = "MPC885", + .mask = 0xFFFFFFFF, + .value = 0x00000000, + .num_devices = 3, + .device_list = (enum ppc_sys_devices[]) + { + MPC8xx_CPM_FEC1, + MPC8xx_CPM_FEC2, + MPC8xx_CPM_SCC1, + MPC8xx_CPM_SCC2, + MPC8xx_CPM_SCC3, + MPC8xx_CPM_SCC4, + MPC8xx_CPM_SMC1, + MPC8xx_CPM_SMC2, + }, + }, + { /* default match */ + .ppc_sys_name = "", + .mask = 0x00000000, + .value = 0x00000000, + }, +}; diff --git a/arch/ppc/syslib/open_pic2.c b/arch/ppc/syslib/open_pic2.c index 2e0ea92144f..9a7e8748e2b 100644 --- a/arch/ppc/syslib/open_pic2.c +++ b/arch/ppc/syslib/open_pic2.c @@ -575,7 +575,7 @@ static void openpic2_cached_disable_irq(u_int irq) * we need something better to deal with that... Maybe switch to S1 for * cpufreq changes */ -int openpic2_suspend(struct sys_device *sysdev, u32 state) +int openpic2_suspend(struct sys_device *sysdev, pm_message_t state) { int i; unsigned long flags; diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig index deca68ad644..c658650af42 100644 --- a/arch/ppc64/Kconfig +++ b/arch/ppc64/Kconfig @@ -28,10 +28,6 @@ config GENERIC_ISA_DMA bool default y -config HAVE_DEC_LOCK - bool - default y - config EARLY_PRINTK bool default y diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile index 17d2c1eac3b..521c2a5a286 100644 --- a/arch/ppc64/Makefile +++ b/arch/ppc64/Makefile @@ -107,7 +107,7 @@ install: vmlinux $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@ defaultimage-$(CONFIG_PPC_PSERIES) := zImage -defaultimage-$(CONFIG_PPC_PMAC) := vmlinux +defaultimage-$(CONFIG_PPC_PMAC) := zImage.vmode defaultimage-$(CONFIG_PPC_MAPLE) := zImage defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux KBUILD_IMAGE := $(defaultimage-y) diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S index 58c314738c9..72c61041151 100644 --- a/arch/ppc64/kernel/head.S +++ b/arch/ppc64/kernel/head.S @@ -1649,7 +1649,7 @@ _GLOBAL(__secondary_start) ld r3,0(r3) lwz r3,PLATFORM(r3) /* r3 = platform flags */ andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ - bne 98f + beq 98f /* branch if result is 0 */ mfspr r3,PVR srwi r3,r3,16 cmpwi r3,0x37 /* SStar */ @@ -1813,7 +1813,7 @@ _STATIC(start_here_multiplatform) ld r3,0(r3) lwz r3,PLATFORM(r3) /* r3 = platform flags */ andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ - bne 98f + beq 98f /* branch if result is 0 */ mfspr r3,PVR srwi r3,r3,16 cmpwi r3,0x37 /* SStar */ @@ -1834,7 +1834,7 @@ _STATIC(start_here_multiplatform) lwz r3,PLATFORM(r3) /* r3 = platform flags */ /* Test if bit 0 is set (LPAR bit) */ andi. r3,r3,PLATFORM_LPAR - bne 98f + bne 98f /* branch if result is !0 */ LOADADDR(r6,_SDR1) /* Only if NOT LPAR */ sub r6,r6,r26 ld r6,0(r6) /* get the value of _SDR1 */ diff --git a/arch/ppc64/kernel/pSeries_iommu.c b/arch/ppc64/kernel/pSeries_iommu.c index f0fd7fbd653..8c6313e7e14 100644 --- a/arch/ppc64/kernel/pSeries_iommu.c +++ b/arch/ppc64/kernel/pSeries_iommu.c @@ -265,8 +265,10 @@ static void iommu_table_setparms(struct pci_controller *phb, tbl->it_offset = phb->dma_window_base_cur >> PAGE_SHIFT; /* Test if we are going over 2GB of DMA space */ - if (phb->dma_window_base_cur + phb->dma_window_size > (1L << 31)) + if (phb->dma_window_base_cur + phb->dma_window_size > 0x80000000ul) { + udbg_printf("PCI_DMA: Unexpected number of IOAs under this PHB.\n"); panic("PCI_DMA: Unexpected number of IOAs under this PHB.\n"); + } phb->dma_window_base_cur += phb->dma_window_size; @@ -310,92 +312,84 @@ static void iommu_table_setparms_lpar(struct pci_controller *phb, static void iommu_bus_setup_pSeries(struct pci_bus *bus) { - struct device_node *dn, *pdn; - struct pci_dn *pci; + struct device_node *dn; struct iommu_table *tbl; + struct device_node *isa_dn, *isa_dn_orig; + struct device_node *tmp; + struct pci_dn *pci; + int children; DBG("iommu_bus_setup_pSeries, bus %p, bus->self %p\n", bus, bus->self); - /* For each (root) bus, we carve up the available DMA space in 256MB - * pieces. Since each piece is used by one (sub) bus/device, that would - * give a maximum of 7 devices per PHB. In most cases, this is plenty. - * - * The exception is on Python PHBs (pre-POWER4). Here we don't have EADS - * bridges below the PHB to allocate the sectioned tables to, so instead - * we allocate a 1GB table at the PHB level. + dn = pci_bus_to_OF_node(bus); + pci = PCI_DN(dn); + + if (bus->self) { + /* This is not a root bus, any setup will be done for the + * device-side of the bridge in iommu_dev_setup_pSeries(). + */ + return; + } + + /* Check if the ISA bus on the system is under + * this PHB. */ + isa_dn = isa_dn_orig = of_find_node_by_type(NULL, "isa"); - dn = pci_bus_to_OF_node(bus); - pci = dn->data; - - if (!bus->self) { - /* Root bus */ - if (is_python(dn)) { - unsigned int *iohole; - - DBG("Python root bus %s\n", bus->name); - - iohole = (unsigned int *)get_property(dn, "io-hole", 0); - - if (iohole) { - /* On first bus we need to leave room for the - * ISA address space. Just skip the first 256MB - * alltogether. This leaves 768MB for the window. - */ - DBG("PHB has io-hole, reserving 256MB\n"); - pci->phb->dma_window_size = 3 << 28; - pci->phb->dma_window_base_cur = 1 << 28; - } else { - /* 1GB window by default */ - pci->phb->dma_window_size = 1 << 30; - pci->phb->dma_window_base_cur = 0; - } - - tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL); - - iommu_table_setparms(pci->phb, dn, tbl); - pci->iommu_table = iommu_init_table(tbl); - } else { - /* Do a 128MB table at root. This is used for the IDE - * controller on some SMP-mode POWER4 machines. It - * doesn't hurt to allocate it on other machines - * -- it'll just be unused since new tables are - * allocated on the EADS level. - * - * Allocate at offset 128MB to avoid having to deal - * with ISA holes; 128MB table for IDE is plenty. - */ - pci->phb->dma_window_size = 1 << 27; - pci->phb->dma_window_base_cur = 1 << 27; - - tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL); - - iommu_table_setparms(pci->phb, dn, tbl); - pci->iommu_table = iommu_init_table(tbl); - - /* All child buses have 256MB tables */ - pci->phb->dma_window_size = 1 << 28; - } - } else { - pdn = pci_bus_to_OF_node(bus->parent); + while (isa_dn && isa_dn != dn) + isa_dn = isa_dn->parent; + + if (isa_dn_orig) + of_node_put(isa_dn_orig); - if (!bus->parent->self && !is_python(pdn)) { - struct iommu_table *tbl; - /* First child and not python means this is the EADS - * level. Allocate new table for this slot with 256MB - * window. - */ + /* Count number of direct PCI children of the PHB. + * All PCI device nodes have class-code property, so it's + * an easy way to find them. + */ + for (children = 0, tmp = dn->child; tmp; tmp = tmp->sibling) + if (get_property(tmp, "class-code", NULL)) + children++; - tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL); + DBG("Children: %d\n", children); - iommu_table_setparms(pci->phb, dn, tbl); + /* Calculate amount of DMA window per slot. Each window must be + * a power of two (due to pci_alloc_consistent requirements). + * + * Keep 256MB aside for PHBs with ISA. + */ - pci->iommu_table = iommu_init_table(tbl); - } else { - /* Lower than first child or under python, use parent table */ - pci->iommu_table = PCI_DN(pdn)->iommu_table; - } + if (!isa_dn) { + /* No ISA/IDE - just set window size and return */ + pci->phb->dma_window_size = 0x80000000ul; /* To be divided */ + + while (pci->phb->dma_window_size * children > 0x80000000ul) + pci->phb->dma_window_size >>= 1; + DBG("No ISA/IDE, window size is %x\n", pci->phb->dma_window_size); + pci->phb->dma_window_base_cur = 0; + + return; } + + /* If we have ISA, then we probably have an IDE + * controller too. Allocate a 128MB table but + * skip the first 128MB to avoid stepping on ISA + * space. + */ + pci->phb->dma_window_size = 0x8000000ul; + pci->phb->dma_window_base_cur = 0x8000000ul; + + tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL); + + iommu_table_setparms(pci->phb, dn, tbl); + pci->iommu_table = iommu_init_table(tbl); + + /* Divide the rest (1.75GB) among the children */ + pci->phb->dma_window_size = 0x80000000ul; + while (pci->phb->dma_window_size * children > 0x70000000ul) + pci->phb->dma_window_size >>= 1; + + DBG("ISA/IDE, window size is %x\n", pci->phb->dma_window_size); + } @@ -446,14 +440,29 @@ static void iommu_bus_setup_pSeriesLP(struct pci_bus *bus) static void iommu_dev_setup_pSeries(struct pci_dev *dev) { struct device_node *dn, *mydn; + struct iommu_table *tbl; DBG("iommu_dev_setup_pSeries, dev %p (%s)\n", dev, dev->pretty_name); - /* Now copy the iommu_table ptr from the bus device down to the - * pci device_node. This means get_iommu_table() won't need to search - * up the device tree to find it. - */ + mydn = dn = pci_device_to_OF_node(dev); + /* If we're the direct child of a root bus, then we need to allocate + * an iommu table ourselves. The bus setup code should have setup + * the window sizes already. + */ + if (!dev->bus->self) { + DBG(" --> first child, no bridge. Allocating iommu table.\n"); + tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL); + iommu_table_setparms(PCI_DN(dn)->phb, dn, tbl); + PCI_DN(mydn)->iommu_table = iommu_init_table(tbl); + + return; + } + + /* If this device is further down the bus tree, search upwards until + * an already allocated iommu table is found and use that. + */ + while (dn && dn->data && PCI_DN(dn)->iommu_table == NULL) dn = dn->parent; diff --git a/arch/ppc64/kernel/pci.c b/arch/ppc64/kernel/pci.c index 861138ad092..ff4be1da69d 100644 --- a/arch/ppc64/kernel/pci.c +++ b/arch/ppc64/kernel/pci.c @@ -246,11 +246,14 @@ static unsigned int pci_parse_of_flags(u32 addr0) unsigned int flags = 0; if (addr0 & 0x02000000) { - flags |= IORESOURCE_MEM; + flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY; + flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64; + flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M; if (addr0 & 0x40000000) - flags |= IORESOURCE_PREFETCH; + flags |= IORESOURCE_PREFETCH + | PCI_BASE_ADDRESS_MEM_PREFETCH; } else if (addr0 & 0x01000000) - flags |= IORESOURCE_IO; + flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; return flags; } diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index 9979919cdf9..f252670874a 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -1711,6 +1711,7 @@ static void __init flatten_device_tree(void) unsigned long offset = reloc_offset(); unsigned long mem_start, mem_end, room; struct boot_param_header *hdr; + struct prom_t *_prom = PTRRELOC(&prom); char *namep; u64 *rsvmap; @@ -1765,6 +1766,7 @@ static void __init flatten_device_tree(void) RELOC(dt_struct_end) = PAGE_ALIGN(mem_start); /* Finish header */ + hdr->boot_cpuid_phys = _prom->cpu; hdr->magic = OF_DT_HEADER; hdr->totalsize = RELOC(dt_struct_end) - RELOC(dt_header_start); hdr->off_dt_struct = RELOC(dt_struct_start) - RELOC(dt_header_start); @@ -1854,7 +1856,6 @@ static void __init prom_find_boot_cpu(void) cpu_pkg = call_prom("instance-to-package", 1, 1, prom_cpu); - prom_setprop(cpu_pkg, "linux,boot-cpu", NULL, 0); prom_getprop(cpu_pkg, "reg", &getprop_rval, sizeof(getprop_rval)); _prom->cpu = getprop_rval; diff --git a/arch/ppc64/kernel/vdso.c b/arch/ppc64/kernel/vdso.c index 4777676365f..efa985f05ac 100644 --- a/arch/ppc64/kernel/vdso.c +++ b/arch/ppc64/kernel/vdso.c @@ -224,10 +224,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack) vma = kmem_cache_alloc(vm_area_cachep, SLAB_KERNEL); if (vma == NULL) return -ENOMEM; - if (security_vm_enough_memory(vdso_pages)) { - kmem_cache_free(vm_area_cachep, vma); - return -ENOMEM; - } + memset(vma, 0, sizeof(*vma)); /* @@ -237,8 +234,10 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack) */ vdso_base = get_unmapped_area(NULL, vdso_base, vdso_pages << PAGE_SHIFT, 0, 0); - if (vdso_base & ~PAGE_MASK) + if (vdso_base & ~PAGE_MASK) { + kmem_cache_free(vm_area_cachep, vma); return (int)vdso_base; + } current->thread.vdso_base = vdso_base; @@ -266,7 +265,11 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack) vma->vm_ops = &vdso_vmops; down_write(&mm->mmap_sem); - insert_vm_struct(mm, vma); + if (insert_vm_struct(mm, vma)) { + up_write(&mm->mmap_sem); + kmem_cache_free(vm_area_cachep, vma); + return -ENOMEM; + } mm->total_vm += (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; up_write(&mm->mmap_sem); diff --git a/arch/ppc64/lib/Makefile b/arch/ppc64/lib/Makefile index 76fbfa9f706..0b6e967de94 100644 --- a/arch/ppc64/lib/Makefile +++ b/arch/ppc64/lib/Makefile @@ -2,7 +2,7 @@ # Makefile for ppc64-specific library files.. # -lib-y := checksum.o dec_and_lock.o string.o strcase.o +lib-y := checksum.o string.o strcase.o lib-y += copypage.o memcpy.o copyuser.o usercopy.o # Lock primitives are defined as no-ops in include/linux/spinlock.h diff --git a/arch/ppc64/lib/dec_and_lock.c b/arch/ppc64/lib/dec_and_lock.c deleted file mode 100644 index 7b9d4da5cf9..00000000000 --- a/arch/ppc64/lib/dec_and_lock.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * ppc64 version of atomic_dec_and_lock() using cmpxchg - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/module.h> -#include <linux/spinlock.h> -#include <asm/atomic.h> -#include <asm/system.h> - -/* - * This is an implementation of the notion of "decrement a - * reference count, and return locked if it decremented to zero". - * - * This implementation can be used on any architecture that - * has a cmpxchg, and where atomic->value is an int holding - * the value of the atomic (i.e. the high bits aren't used - * for a lock or anything like that). - */ -int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock) -{ - int counter; - int newcount; - - for (;;) { - counter = atomic_read(atomic); - newcount = counter - 1; - if (!newcount) - break; /* do it the slow way */ - - newcount = cmpxchg(&atomic->counter, counter, newcount); - if (newcount == counter) - return 0; - } - - spin_lock(lock); - if (atomic_dec_and_test(atomic)) - return 1; - spin_unlock(lock); - return 0; -} - -EXPORT_SYMBOL(_atomic_dec_and_lock); diff --git a/arch/ppc64/mm/fault.c b/arch/ppc64/mm/fault.c index 7fbc68bbb73..be3f25cf3e9 100644 --- a/arch/ppc64/mm/fault.c +++ b/arch/ppc64/mm/fault.c @@ -38,6 +38,7 @@ #include <asm/system.h> #include <asm/uaccess.h> #include <asm/kdebug.h> +#include <asm/siginfo.h> /* * Check whether the instruction at regs->nip is a store using diff --git a/arch/s390/defconfig b/arch/s390/defconfig index 0865251a3f4..45d44c6bb39 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc4 -# Fri Jul 29 14:49:30 2005 +# Linux kernel version: 2.6.14-rc1 +# Wed Sep 14 16:46:19 2005 # CONFIG_MMU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y @@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -33,6 +34,7 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set @@ -94,6 +96,7 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set # # I/O subsystem configuration @@ -151,8 +154,8 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -CONFIG_IP_TCPDIAG_IPV6=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y CONFIG_IPV6=y @@ -165,6 +168,11 @@ CONFIG_IPV6=y # CONFIG_NETFILTER is not set # +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set @@ -217,9 +225,11 @@ CONFIG_NET_CLS_POLICE=y # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # CONFIG_PCMCIA is not set # @@ -233,6 +243,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -260,6 +271,7 @@ CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SPI_ATTRS is not set CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -280,7 +292,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set @@ -384,6 +395,10 @@ CONFIG_EQUALIZER=m CONFIG_TUN=m # +# PHY device support +# + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y @@ -453,10 +468,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -465,6 +476,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -485,11 +497,10 @@ CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -533,6 +544,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -572,6 +584,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set CONFIG_DEBUG_PREEMPT=y @@ -626,5 +639,6 @@ CONFIG_CRYPTO=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=m # CONFIG_LIBCRC32C is not set diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index ab1e49d2e51..8584dd82321 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -6,7 +6,7 @@ EXTRA_AFLAGS := -traditional obj-y := bitmap.o traps.o time.o process.o \ setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \ - semaphore.o s390_ext.o debug.o profile.o irq.o + semaphore.o s390_ext.o debug.o profile.o irq.o reipl_diag.o extra-$(CONFIG_ARCH_S390_31) += head.o extra-$(CONFIG_ARCH_S390X) += head64.o diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 58fc7fbcb40..9b30f4cf32c 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -108,7 +108,7 @@ STACK_SIZE = 1 << STACK_SHIFT bl BASED(0f) l %r14,BASED(.Lcleanup_critical) basr %r14,%r14 - tm 0(%r12),0x01 # retest problem state after cleanup + tm 1(%r12),0x01 # retest problem state after cleanup bnz BASED(1f) 0: l %r14,__LC_ASYNC_STACK # are we already on the async stack ? slr %r14,%r15 diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index d0c9ffaa25d..7b9b4a2ba1d 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -101,7 +101,7 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_MCCK_PENDING) clc \psworg+8(8),BASED(.Lcritical_start) jl 0f brasl %r14,cleanup_critical - tm 0(%r12),0x01 # retest problem state after cleanup + tm 1(%r12),0x01 # retest problem state after cleanup jnz 1f 0: lg %r14,__LC_ASYNC_STACK # are we already on the async. stack ? slgr %r14,%r15 diff --git a/arch/s390/kernel/reipl_diag.c b/arch/s390/kernel/reipl_diag.c new file mode 100644 index 00000000000..83cb42bc0b7 --- /dev/null +++ b/arch/s390/kernel/reipl_diag.c @@ -0,0 +1,39 @@ +/* + * This file contains the implementation of the + * Linux re-IPL support + * + * (C) Copyright IBM Corp. 2005 + * + * Author(s): Volker Sameske (sameske@de.ibm.com) + * + */ + +#include <linux/kernel.h> + +static unsigned int reipl_diag_rc1; +static unsigned int reipl_diag_rc2; + +/* + * re-IPL the system using the last used IPL parameters + */ +void reipl_diag(void) +{ + asm volatile ( + " la %%r4,0\n" + " la %%r5,0\n" + " diag %%r4,%2,0x308\n" + "0:\n" + " st %%r4,%0\n" + " st %%r5,%1\n" + ".section __ex_table,\"a\"\n" +#ifdef __s390x__ + " .align 8\n" + " .quad 0b, 0b\n" +#else + " .align 4\n" + " .long 0b, 0b\n" +#endif + ".previous\n" + : "=m" (reipl_diag_rc1), "=m" (reipl_diag_rc2) + : "d" (3) : "cc", "4", "5" ); +} diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 5ba5a5485da..5204778b8e5 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -261,8 +261,11 @@ void (*_machine_power_off)(void) = machine_power_off_smp; * Reboot, halt and power_off routines for non SMP. */ extern void reipl(unsigned long devno); +extern void reipl_diag(void); static void do_machine_restart_nonsmp(char * __unused) { + reipl_diag(); + if (MACHINE_IS_VM) cpcmd ("IPL", NULL, 0); else @@ -634,6 +637,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) struct cpuinfo_S390 *cpuinfo; unsigned long n = (unsigned long) v - 1; + preempt_disable(); if (!n) { seq_printf(m, "vendor_id : IBM/S390\n" "# processors : %i\n" @@ -658,6 +662,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) cpuinfo->cpu_id.ident, cpuinfo->cpu_id.machine); } + preempt_enable(); return 0; } diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 85222fee436..e13c87b446b 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -65,6 +65,7 @@ extern char vmhalt_cmd[]; extern char vmpoff_cmd[]; extern void reipl(unsigned long devno); +extern void reipl_diag(void); static void smp_ext_bitcall(int, ec_bit_sig); static void smp_ext_bitcall_others(ec_bit_sig); @@ -283,6 +284,8 @@ static void do_machine_restart(void * __unused) * interrupted by an external interrupt and s390irq * locks are always held disabled). */ + reipl_diag(); + if (MACHINE_IS_VM) cpcmd ("IPL", NULL, 0, NULL); else diff --git a/arch/sparc64/Kconfig.debug b/arch/sparc64/Kconfig.debug index cd8d39fb954..af0e9411b83 100644 --- a/arch/sparc64/Kconfig.debug +++ b/arch/sparc64/Kconfig.debug @@ -33,14 +33,6 @@ config DEBUG_BOOTMEM depends on DEBUG_KERNEL bool "Debug BOOTMEM initialization" -# We have a custom atomic_dec_and_lock() implementation but it's not -# compatible with spinlock debugging so we need to fall back on -# the generic version in that case. -config HAVE_DEC_LOCK - bool - depends on SMP && !DEBUG_SPINLOCK - default y - config MCOUNT bool depends on STACK_DEBUG diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index 3e0badb820c..b4834952785 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -42,19 +42,15 @@ * executing (see inherit_locked_prom_mappings() rant). */ sparc64_vpte_nucleus: - /* Load 0xf0000000, which is LOW_OBP_ADDRESS. */ - mov 0xf, %g5 - sllx %g5, 28, %g5 - - /* Is addr >= LOW_OBP_ADDRESS? */ + /* Note that kvmap below has verified that the address is + * in the range MODULES_VADDR --> VMALLOC_END already. So + * here we need only check if it is an OBP address or not. + */ + sethi %hi(LOW_OBP_ADDRESS), %g5 cmp %g4, %g5 blu,pn %xcc, sparc64_vpte_patchme1 mov 0x1, %g5 - - /* Load 0x100000000, which is HI_OBP_ADDRESS. */ sllx %g5, 32, %g5 - - /* Is addr < HI_OBP_ADDRESS? */ cmp %g4, %g5 blu,pn %xcc, obp_iaddr_patch nop @@ -156,26 +152,29 @@ obp_daddr_patch: * rather, use information saved during inherit_prom_mappings() using 8k * pagesize. */ + .align 32 kvmap: - /* Load 0xf0000000, which is LOW_OBP_ADDRESS. */ - mov 0xf, %g5 - sllx %g5, 28, %g5 + sethi %hi(MODULES_VADDR), %g5 + cmp %g4, %g5 + blu,pn %xcc, longpath + mov (VMALLOC_END >> 24), %g5 + sllx %g5, 24, %g5 + cmp %g4, %g5 + bgeu,pn %xcc, longpath + nop - /* Is addr >= LOW_OBP_ADDRESS? */ +kvmap_check_obp: + sethi %hi(LOW_OBP_ADDRESS), %g5 cmp %g4, %g5 - blu,pn %xcc, vmalloc_addr + blu,pn %xcc, kvmap_vmalloc_addr mov 0x1, %g5 - - /* Load 0x100000000, which is HI_OBP_ADDRESS. */ sllx %g5, 32, %g5 - - /* Is addr < HI_OBP_ADDRESS? */ cmp %g4, %g5 blu,pn %xcc, obp_daddr_patch nop -vmalloc_addr: - /* If we get here, a vmalloc addr accessed, load kernel VPTE. */ +kvmap_vmalloc_addr: + /* If we get here, a vmalloc addr was accessed, load kernel VPTE. */ ldxa [%g3 + %g6] ASI_N, %g5 brgez,pn %g5, longpath nop diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c index 23ad839d113..5efbff90d66 100644 --- a/arch/sparc64/kernel/ptrace.c +++ b/arch/sparc64/kernel/ptrace.c @@ -30,6 +30,7 @@ #include <asm/psrcompat.h> #include <asm/visasm.h> #include <asm/spitfire.h> +#include <asm/page.h> /* Returning from ptrace is a bit tricky because the syscall return * low level code assumes any value returned which is negative and @@ -128,20 +129,20 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, * is mapped to in the user's address space, we can skip the * D-cache flush. */ - if ((uaddr ^ kaddr) & (1UL << 13)) { + if ((uaddr ^ (unsigned long) kaddr) & (1UL << 13)) { unsigned long start = __pa(kaddr); unsigned long end = start + len; if (tlb_type == spitfire) { for (; start < end; start += 32) - spitfire_put_dcache_tag(va & 0x3fe0, 0x0); + spitfire_put_dcache_tag(start & 0x3fe0, 0x0); } else { for (; start < end; start += 32) __asm__ __volatile__( "stxa %%g0, [%0] %1\n\t" "membar #Sync" : /* no outputs */ - : "r" (va), + : "r" (start), "i" (ASI_DCACHE_INVALIDATE)); } } diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c index cbb5e59824e..fb7a5370dbf 100644 --- a/arch/sparc64/kernel/sparc64_ksyms.c +++ b/arch/sparc64/kernel/sparc64_ksyms.c @@ -163,9 +163,6 @@ EXPORT_SYMBOL(atomic64_add); EXPORT_SYMBOL(atomic64_add_ret); EXPORT_SYMBOL(atomic64_sub); EXPORT_SYMBOL(atomic64_sub_ret); -#ifdef CONFIG_SMP -EXPORT_SYMBOL(_atomic_dec_and_lock); -#endif /* Atomic bit operations. */ EXPORT_SYMBOL(test_and_set_bit); diff --git a/arch/sparc64/kernel/una_asm.S b/arch/sparc64/kernel/una_asm.S index cbb40585253..da48400bcc9 100644 --- a/arch/sparc64/kernel/una_asm.S +++ b/arch/sparc64/kernel/una_asm.S @@ -17,7 +17,7 @@ kernel_unaligned_trap_fault: __do_int_store: rd %asi, %o4 wr %o3, 0, %asi - ldx [%o2], %g3 + mov %o2, %g3 cmp %o1, 2 be,pn %icc, 2f cmp %o1, 4 diff --git a/arch/sparc64/kernel/unaligned.c b/arch/sparc64/kernel/unaligned.c index da9739f0d43..42718f6a7d3 100644 --- a/arch/sparc64/kernel/unaligned.c +++ b/arch/sparc64/kernel/unaligned.c @@ -184,13 +184,14 @@ extern void do_int_load(unsigned long *dest_reg, int size, unsigned long *saddr, int is_signed, int asi); extern void __do_int_store(unsigned long *dst_addr, int size, - unsigned long *src_val, int asi); + unsigned long src_val, int asi); static inline void do_int_store(int reg_num, int size, unsigned long *dst_addr, - struct pt_regs *regs, int asi) + struct pt_regs *regs, int asi, int orig_asi) { unsigned long zero = 0; - unsigned long *src_val = &zero; + unsigned long *src_val_p = &zero; + unsigned long src_val; if (size == 16) { size = 8; @@ -198,7 +199,25 @@ static inline void do_int_store(int reg_num, int size, unsigned long *dst_addr, (unsigned)fetch_reg(reg_num, regs) : 0)) << 32) | (unsigned)fetch_reg(reg_num + 1, regs); } else if (reg_num) { - src_val = fetch_reg_addr(reg_num, regs); + src_val_p = fetch_reg_addr(reg_num, regs); + } + src_val = *src_val_p; + if (unlikely(asi != orig_asi)) { + switch (size) { + case 2: + src_val = swab16(src_val); + break; + case 4: + src_val = swab32(src_val); + break; + case 8: + src_val = swab64(src_val); + break; + case 16: + default: + BUG(); + break; + }; } __do_int_store(dst_addr, size, src_val, asi); } @@ -276,6 +295,7 @@ asmlinkage void kernel_unaligned_trap(struct pt_regs *regs, unsigned int insn, u kernel_mna_trap_fault(); } else { unsigned long addr; + int orig_asi, asi; addr = compute_effective_address(regs, insn, ((insn >> 25) & 0x1f)); @@ -285,18 +305,48 @@ asmlinkage void kernel_unaligned_trap(struct pt_regs *regs, unsigned int insn, u regs->tpc, dirstrings[dir], addr, size, regs->u_regs[UREG_RETPC]); #endif + orig_asi = asi = decode_asi(insn, regs); + switch (asi) { + case ASI_NL: + case ASI_AIUPL: + case ASI_AIUSL: + case ASI_PL: + case ASI_SL: + case ASI_PNFL: + case ASI_SNFL: + asi &= ~0x08; + break; + }; switch (dir) { case load: do_int_load(fetch_reg_addr(((insn>>25)&0x1f), regs), size, (unsigned long *) addr, - decode_signedness(insn), - decode_asi(insn, regs)); + decode_signedness(insn), asi); + if (unlikely(asi != orig_asi)) { + unsigned long val_in = *(unsigned long *) addr; + switch (size) { + case 2: + val_in = swab16(val_in); + break; + case 4: + val_in = swab32(val_in); + break; + case 8: + val_in = swab64(val_in); + break; + case 16: + default: + BUG(); + break; + }; + *(unsigned long *) addr = val_in; + } break; case store: do_int_store(((insn>>25)&0x1f), size, (unsigned long *) addr, regs, - decode_asi(insn, regs)); + asi, orig_asi); break; default: diff --git a/arch/sparc64/lib/Makefile b/arch/sparc64/lib/Makefile index d968aebe83b..c295806500f 100644 --- a/arch/sparc64/lib/Makefile +++ b/arch/sparc64/lib/Makefile @@ -14,6 +14,4 @@ lib-y := PeeCeeI.o copy_page.o clear_page.o strlen.o strncmp.o \ copy_in_user.o user_fixup.o memmove.o \ mcount.o ipcsum.o rwsem.o xor.o find_bit.o delay.o -lib-$(CONFIG_HAVE_DEC_LOCK) += dec_and_lock.o - obj-y += iomap.o diff --git a/arch/sparc64/lib/dec_and_lock.S b/arch/sparc64/lib/dec_and_lock.S deleted file mode 100644 index 8ee288dd0af..00000000000 --- a/arch/sparc64/lib/dec_and_lock.S +++ /dev/null @@ -1,80 +0,0 @@ -/* $Id: dec_and_lock.S,v 1.5 2001/11/18 00:12:56 davem Exp $ - * dec_and_lock.S: Sparc64 version of "atomic_dec_and_lock()" - * using cas and ldstub instructions. - * - * Copyright (C) 2000 David S. Miller (davem@redhat.com) - */ -#include <linux/config.h> -#include <asm/thread_info.h> - - .text - .align 64 - - /* CAS basically works like this: - * - * void CAS(MEM, REG1, REG2) - * { - * START_ATOMIC(); - * if (*(MEM) == REG1) { - * TMP = *(MEM); - * *(MEM) = REG2; - * REG2 = TMP; - * } else - * REG2 = *(MEM); - * END_ATOMIC(); - * } - */ - - .globl _atomic_dec_and_lock -_atomic_dec_and_lock: /* %o0 = counter, %o1 = lock */ -loop1: lduw [%o0], %g2 - subcc %g2, 1, %g7 - be,pn %icc, start_to_zero - nop -nzero: cas [%o0], %g2, %g7 - cmp %g2, %g7 - bne,pn %icc, loop1 - mov 0, %g1 - -out: - membar #StoreLoad | #StoreStore - retl - mov %g1, %o0 -start_to_zero: -#ifdef CONFIG_PREEMPT - ldsw [%g6 + TI_PRE_COUNT], %g3 - add %g3, 1, %g3 - stw %g3, [%g6 + TI_PRE_COUNT] -#endif -to_zero: - ldstub [%o1], %g3 - membar #StoreLoad | #StoreStore - brnz,pn %g3, spin_on_lock - nop -loop2: cas [%o0], %g2, %g7 /* ASSERT(g7 == 0) */ - cmp %g2, %g7 - - be,pt %icc, out - mov 1, %g1 - lduw [%o0], %g2 - subcc %g2, 1, %g7 - be,pn %icc, loop2 - nop - membar #StoreStore | #LoadStore - stb %g0, [%o1] -#ifdef CONFIG_PREEMPT - ldsw [%g6 + TI_PRE_COUNT], %g3 - sub %g3, 1, %g3 - stw %g3, [%g6 + TI_PRE_COUNT] -#endif - - b,pt %xcc, nzero - nop -spin_on_lock: - ldub [%o1], %g3 - membar #LoadLoad - brnz,pt %g3, spin_on_lock - nop - ba,pt %xcc, to_zero - nop - nop diff --git a/arch/um/Kconfig.i386 b/arch/um/Kconfig.i386 index 8ad156a0049..5d92cacd56c 100644 --- a/arch/um/Kconfig.i386 +++ b/arch/um/Kconfig.i386 @@ -42,3 +42,7 @@ config ARCH_HAS_SC_SIGNALS config ARCH_REUSE_HOST_VSYSCALL_AREA bool default y + +config X86_CMPXCHG + bool + default y diff --git a/arch/um/Makefile b/arch/um/Makefile index ce987266dac..5b5af95721a 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -53,9 +53,13 @@ SYS_DIR := $(ARCH_DIR)/include/sysdep-$(SUBARCH) # -Dvmap=kernel_vmap affects everything, and prevents anything from # referencing the libpcap.o symbol so named. +# +# Same things for in6addr_loopback - found in libc. CFLAGS += $(CFLAGS-y) -D__arch_um__ -DSUBARCH=\"$(SUBARCH)\" \ - $(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap + $(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap \ + -Din6addr_loopback=kernel_in6addr_loopback + AFLAGS += $(ARCH_INCLUDE) USER_CFLAGS := $(patsubst -I%,,$(CFLAGS)) diff --git a/arch/um/drivers/mcast_user.c b/arch/um/drivers/mcast_user.c index 7a0d115b29d..5db136e2651 100644 --- a/arch/um/drivers/mcast_user.c +++ b/arch/um/drivers/mcast_user.c @@ -13,7 +13,6 @@ #include <errno.h> #include <unistd.h> -#include <linux/inet.h> #include <sys/socket.h> #include <sys/un.h> #include <sys/time.h> @@ -55,7 +54,7 @@ static int mcast_open(void *data) struct mcast_data *pri = data; struct sockaddr_in *sin = pri->mcast_addr; struct ip_mreq mreq; - int fd = -EINVAL, yes = 1, err = -EINVAL;; + int fd, yes = 1, err = 0; if ((sin->sin_addr.s_addr == 0) || (sin->sin_port == 0)) @@ -66,13 +65,14 @@ static int mcast_open(void *data) if (fd < 0){ printk("mcast_open : data socket failed, errno = %d\n", errno); - fd = -errno; + err = -errno; goto out; } if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &yes, sizeof(yes)) < 0) { printk("mcast_open: SO_REUSEADDR failed, errno = %d\n", errno); + err = -errno; goto out_close; } @@ -81,6 +81,7 @@ static int mcast_open(void *data) sizeof(pri->ttl)) < 0) { printk("mcast_open: IP_MULTICAST_TTL failed, error = %d\n", errno); + err = -errno; goto out_close; } @@ -88,12 +89,14 @@ static int mcast_open(void *data) if (setsockopt(fd, SOL_IP, IP_MULTICAST_LOOP, &yes, sizeof(yes)) < 0) { printk("mcast_open: IP_MULTICAST_LOOP failed, error = %d\n", errno); + err = -errno; goto out_close; } /* bind socket to mcast address */ if (bind(fd, (struct sockaddr *) sin, sizeof(*sin)) < 0) { printk("mcast_open : data bind failed, errno = %d\n", errno); + err = -errno; goto out_close; } @@ -108,14 +111,15 @@ static int mcast_open(void *data) "interface on the host.\n"); printk("eth0 should be configured in order to use the " "multicast transport.\n"); + err = -errno; goto out_close; } - out: return fd; out_close: os_close_file(fd); + out: return err; } diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c index c190c241419..12c95368124 100644 --- a/arch/um/drivers/mconsole_kern.c +++ b/arch/um/drivers/mconsole_kern.c @@ -32,6 +32,7 @@ #include "os.h" #include "umid.h" #include "irq_kern.h" +#include "choose-mode.h" static int do_unlink_socket(struct notifier_block *notifier, unsigned long what, void *data) @@ -276,6 +277,7 @@ void mconsole_proc(struct mc_request *req) go - continue the UML after a 'stop' \n\ log <string> - make UML enter <string> into the kernel log\n\ proc <file> - returns the contents of the UML's /proc/<file>\n\ + stack <pid> - returns the stack of the specified pid\n\ " void mconsole_help(struct mc_request *req) @@ -479,6 +481,56 @@ void mconsole_sysrq(struct mc_request *req) } #endif +/* Mconsole stack trace + * Added by Allan Graves, Jeff Dike + * Dumps a stacks registers to the linux console. + * Usage stack <pid>. + */ +void do_stack(struct mc_request *req) +{ + char *ptr = req->request.data; + int pid_requested= -1; + struct task_struct *from = NULL; + struct task_struct *to = NULL; + + /* Would be nice: + * 1) Send showregs output to mconsole. + * 2) Add a way to stack dump all pids. + */ + + ptr += strlen("stack"); + while(isspace(*ptr)) ptr++; + + /* Should really check for multiple pids or reject bad args here */ + /* What do the arguments in mconsole_reply mean? */ + if(sscanf(ptr, "%d", &pid_requested) == 0){ + mconsole_reply(req, "Please specify a pid", 1, 0); + return; + } + + from = current; + to = find_task_by_pid(pid_requested); + + if((to == NULL) || (pid_requested == 0)) { + mconsole_reply(req, "Couldn't find that pid", 1, 0); + return; + } + to->thread.saved_task = current; + + switch_to(from, to, from); + mconsole_reply(req, "Stack Dumped to console and message log", 0, 0); +} + +void mconsole_stack(struct mc_request *req) +{ + /* This command doesn't work in TT mode, so let's check and then + * get out of here + */ + CHOOSE_MODE(mconsole_reply(req, "Sorry, this doesn't work in TT mode", + 1, 0), + do_stack(req)); +} + /* Changed by mconsole_setup, which is __setup, and called before SMP is * active. */ diff --git a/arch/um/drivers/mconsole_user.c b/arch/um/drivers/mconsole_user.c index fe5afb13252..310c1f823f2 100644 --- a/arch/um/drivers/mconsole_user.c +++ b/arch/um/drivers/mconsole_user.c @@ -30,6 +30,7 @@ static struct mconsole_command commands[] = { { "go", mconsole_go, MCONSOLE_INTR }, { "log", mconsole_log, MCONSOLE_INTR }, { "proc", mconsole_proc, MCONSOLE_PROC }, + { "stack", mconsole_stack, MCONSOLE_INTR }, }; /* Initialized in mconsole_init, which is an initcall */ @@ -172,9 +173,9 @@ int mconsole_notify(char *sock_name, int type, const void *data, int len) if(notify_sock < 0){ notify_sock = socket(PF_UNIX, SOCK_DGRAM, 0); if(notify_sock < 0){ - printk("mconsole_notify - socket failed, errno = %d\n", - errno); err = -errno; + printk("mconsole_notify - socket failed, errno = %d\n", + err); } } unlock_notify(); @@ -197,8 +198,8 @@ int mconsole_notify(char *sock_name, int type, const void *data, int len) n = sendto(notify_sock, &packet, len, 0, (struct sockaddr *) &target, sizeof(target)); if(n < 0){ - printk("mconsole_notify - sendto failed, errno = %d\n", errno); err = -errno; + printk("mconsole_notify - sendto failed, errno = %d\n", errno); } return(err); } diff --git a/arch/um/drivers/pty.c b/arch/um/drivers/pty.c index ed84d01df6c..0306a1b215b 100644 --- a/arch/um/drivers/pty.c +++ b/arch/um/drivers/pty.c @@ -43,8 +43,9 @@ static int pts_open(int input, int output, int primary, void *d, fd = get_pty(); if(fd < 0){ + err = -errno; printk("open_pts : Failed to open pts\n"); - return(-errno); + return err; } if(data->raw){ CATCH_EINTR(err = tcgetattr(fd, &data->tt)); diff --git a/arch/um/drivers/ubd_user.c b/arch/um/drivers/ubd_user.c deleted file mode 100644 index b94d2bc4fe0..00000000000 --- a/arch/um/drivers/ubd_user.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com) - * Copyright (C) 2001 Ridgerun,Inc (glonnon@ridgerun.com) - * Licensed under the GPL - */ - -#include <stddef.h> -#include <unistd.h> -#include <errno.h> -#include <sched.h> -#include <signal.h> -#include <string.h> -#include <netinet/in.h> -#include <sys/time.h> -#include <sys/socket.h> -#include <sys/mman.h> -#include <sys/param.h> -#include "asm/types.h" -#include "user_util.h" -#include "kern_util.h" -#include "user.h" -#include "ubd_user.h" -#include "os.h" -#include "cow.h" - -#include <endian.h> -#include <byteswap.h> - -void ignore_sigwinch_sig(void) -{ - signal(SIGWINCH, SIG_IGN); -} - -int start_io_thread(unsigned long sp, int *fd_out) -{ - int pid, fds[2], err; - - err = os_pipe(fds, 1, 1); - if(err < 0){ - printk("start_io_thread - os_pipe failed, err = %d\n", -err); - goto out; - } - - kernel_fd = fds[0]; - *fd_out = fds[1]; - - pid = clone(io_thread, (void *) sp, CLONE_FILES | CLONE_VM | SIGCHLD, - NULL); - if(pid < 0){ - printk("start_io_thread - clone failed : errno = %d\n", errno); - err = -errno; - goto out_close; - } - - return(pid); - - out_close: - os_close_file(fds[0]); - os_close_file(fds[1]); - kernel_fd = -1; - *fd_out = -1; - out: - return(err); -} - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c index 93dc1911363..90e0e5ff451 100644 --- a/arch/um/drivers/xterm.c +++ b/arch/um/drivers/xterm.c @@ -110,13 +110,15 @@ int xterm_open(int input, int output, int primary, void *d, fd = mkstemp(file); if(fd < 0){ + err = -errno; printk("xterm_open : mkstemp failed, errno = %d\n", errno); - return(-errno); + return err; } if(unlink(file)){ + err = -errno; printk("xterm_open : unlink failed, errno = %d\n", errno); - return(-errno); + return err; } os_close_file(fd); diff --git a/arch/um/include/common-offsets.h b/arch/um/include/common-offsets.h index 0aa620970ad..782ac3a3baf 100644 --- a/arch/um/include/common-offsets.h +++ b/arch/um/include/common-offsets.h @@ -12,4 +12,6 @@ DEFINE_STR(UM_KERN_WARNING, KERN_WARNING); DEFINE_STR(UM_KERN_NOTICE, KERN_NOTICE); DEFINE_STR(UM_KERN_INFO, KERN_INFO); DEFINE_STR(UM_KERN_DEBUG, KERN_DEBUG); -DEFINE(HOST_ELF_CLASS, ELF_CLASS); +DEFINE(UM_ELF_CLASS, ELF_CLASS); +DEFINE(UM_ELFCLASS32, ELFCLASS32); +DEFINE(UM_ELFCLASS64, ELFCLASS64); diff --git a/arch/um/include/mconsole.h b/arch/um/include/mconsole.h index cfa368e045a..b1b512f4703 100644 --- a/arch/um/include/mconsole.h +++ b/arch/um/include/mconsole.h @@ -81,6 +81,7 @@ extern void mconsole_stop(struct mc_request *req); extern void mconsole_go(struct mc_request *req); extern void mconsole_log(struct mc_request *req); extern void mconsole_proc(struct mc_request *req); +extern void mconsole_stack(struct mc_request *req); extern int mconsole_get_request(int fd, struct mc_request *req); extern int mconsole_notify(char *sock_name, int type, const void *data, diff --git a/arch/um/include/mem_user.h b/arch/um/include/mem_user.h index d6404bb6466..9fef4123a65 100644 --- a/arch/um/include/mem_user.h +++ b/arch/um/include/mem_user.h @@ -51,7 +51,6 @@ extern unsigned long task_size; extern void check_devanon(void); extern int init_mem_user(void); -extern int create_mem_file(unsigned long len); extern void setup_memory(void *entry); extern unsigned long find_iomem(char *driver, unsigned long *len_out); extern int init_maps(unsigned long physmem, unsigned long iomem, @@ -64,20 +63,6 @@ extern unsigned long phys_offset(unsigned long phys); extern void unmap_physmem(void); extern void map_memory(unsigned long virt, unsigned long phys, unsigned long len, int r, int w, int x); -extern int protect_memory(unsigned long addr, unsigned long len, - int r, int w, int x, int must_succeed); extern unsigned long get_kmem_end(void); -extern void check_tmpexec(void); #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/include/os.h b/arch/um/include/os.h index 4c362458052..583329d0a53 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -157,6 +157,9 @@ extern int os_lock_file(int fd, int excl); extern void os_early_checks(void); extern int can_do_skas(void); +/* mem.c */ +extern int create_mem_file(unsigned long len); + /* process.c */ extern unsigned long os_process_pc(int pid); extern int os_process_parent(int pid); @@ -181,6 +184,8 @@ extern unsigned long long os_usecs(void); /* tt.c * for tt mode only (will be deleted in future...) */ +extern int protect_memory(unsigned long addr, unsigned long len, + int r, int w, int x, int must_succeed); extern void forward_pending_sigio(int target); extern int start_fork_tramp(void *arg, unsigned long temp_stack, int clone_flags, int (*tramp)(void *)); diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile index 614b8ebeb0e..1a0001b3850 100644 --- a/arch/um/kernel/Makefile +++ b/arch/um/kernel/Makefile @@ -1,4 +1,4 @@ -# +# # Copyright (C) 2002 Jeff Dike (jdike@karaya.com) # Licensed under the GPL # @@ -7,11 +7,11 @@ extra-y := vmlinux.lds clean-files := obj-y = config.o exec_kern.o exitcode.o \ - helper.o init_task.o irq.o irq_user.o ksyms.o main.o mem.o mem_user.o \ - physmem.o process_kern.o ptrace.o reboot.o resource.o sigio_user.o \ - sigio_kern.o signal_kern.o signal_user.o smp.o syscall_kern.o sysrq.o \ - tempfile.o time.o time_kern.o tlb.o trap_kern.o trap_user.o \ - uaccess_user.o um_arch.o umid.o user_util.o + helper.o init_task.o irq.o irq_user.o ksyms.o main.o mem.o physmem.o \ + process_kern.o ptrace.o reboot.o resource.o sigio_user.o sigio_kern.o \ + signal_kern.o signal_user.o smp.o syscall_kern.o sysrq.o time.o \ + time_kern.o tlb.o trap_kern.o trap_user.o uaccess_user.o um_arch.o \ + umid.o user_util.o obj-$(CONFIG_BLK_DEV_INITRD) += initrd.o obj-$(CONFIG_GPROF) += gprof_syms.o @@ -24,8 +24,8 @@ obj-$(CONFIG_MODE_SKAS) += skas/ user-objs-$(CONFIG_TTY_LOG) += tty_log.o -USER_OBJS := $(user-objs-y) config.o helper.o main.o tempfile.o time.o \ - tty_log.o umid.o user_util.o +USER_OBJS := $(user-objs-y) config.o helper.o main.o time.o tty_log.o umid.o \ + user_util.o include arch/um/scripts/Makefile.rules diff --git a/arch/um/kernel/helper.c b/arch/um/kernel/helper.c index f83e1e8e239..33fb0bd3b11 100644 --- a/arch/um/kernel/helper.c +++ b/arch/um/kernel/helper.c @@ -85,8 +85,8 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, data.fd = fds[1]; pid = clone(helper_child, (void *) sp, CLONE_VM | SIGCHLD, &data); if(pid < 0){ - printk("run_helper : clone failed, errno = %d\n", errno); ret = -errno; + printk("run_helper : clone failed, errno = %d\n", errno); goto out_close; } @@ -122,7 +122,7 @@ int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, unsigned long *stack_out, int stack_order) { unsigned long stack, sp; - int pid, status; + int pid, status, err; stack = alloc_stack(stack_order, um_in_interrupt()); if(stack == 0) return(-ENOMEM); @@ -130,16 +130,18 @@ int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, sp = stack + (page_size() << stack_order) - sizeof(void *); pid = clone(proc, (void *) sp, flags | SIGCHLD, arg); if(pid < 0){ + err = -errno; printk("run_helper_thread : clone failed, errno = %d\n", errno); - return(-errno); + return err; } if(stack_out == NULL){ CATCH_EINTR(pid = waitpid(pid, &status, 0)); if(pid < 0){ + err = -errno; printk("run_helper_thread - wait failed, errno = %d\n", errno); - pid = -errno; + pid = err; } if(!WIFEXITED(status) || (WEXITSTATUS(status) != 0)) printk("run_helper_thread - thread returned status " @@ -156,8 +158,8 @@ int helper_wait(int pid) CATCH_EINTR(ret = waitpid(pid, NULL, WNOHANG)); if(ret < 0){ + ret = -errno; printk("helper_wait : waitpid failed, errno = %d\n", errno); - return(-errno); } return(ret); } diff --git a/arch/um/kernel/init_task.c b/arch/um/kernel/init_task.c index cd7c85be0a1..49ed5ddf070 100644 --- a/arch/um/kernel/init_task.c +++ b/arch/um/kernel/init_task.c @@ -13,6 +13,7 @@ #include "asm/pgtable.h" #include "user_util.h" #include "mem_user.h" +#include "os.h" static struct fs_struct init_fs = INIT_FS; struct mm_struct init_mm = INIT_MM(init_mm); @@ -45,8 +46,8 @@ __attribute__((__section__(".data.init_task"))) = void unprotect_stack(unsigned long stack) { - protect_memory(stack, (1 << CONFIG_KERNEL_STACK_ORDER) * PAGE_SIZE, - 1, 1, 0, 1); + os_protect_memory((void *) stack, (1 << CONFIG_KERNEL_STACK_ORDER) * PAGE_SIZE, + 1, 1, 0); } /* diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c index 64fa062cc11..ea008b031a8 100644 --- a/arch/um/kernel/mem.c +++ b/arch/um/kernel/mem.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2000 - 2003 Jeff Dike (jdike@addtoit.com) * Licensed under the GPL */ @@ -19,6 +19,10 @@ #include "mem_user.h" #include "uml_uaccess.h" #include "os.h" +#include "linux/types.h" +#include "linux/string.h" +#include "init.h" +#include "kern_constants.h" extern char __binary_start; @@ -368,6 +372,16 @@ struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address) return pte; } +struct iomem_region *iomem_regions = NULL; +int iomem_size = 0; + +extern int parse_iomem(char *str, int *add) __init; + +__uml_setup("iomem=", parse_iomem, +"iomem=<name>,<file>\n" +" Configure <file> as an IO memory region named <name>.\n\n" +); + /* * Overrides for Emacs so that we follow Linus's tabbing style. * Emacs will notice this stuff at the end of the file and automatically diff --git a/arch/um/kernel/mem_user.c b/arch/um/kernel/mem_user.c deleted file mode 100644 index 4a663fd434b..00000000000 --- a/arch/um/kernel/mem_user.c +++ /dev/null @@ -1,273 +0,0 @@ -/* - * arch/um/kernel/mem_user.c - * - * BRIEF MODULE DESCRIPTION - * user side memory routines for supporting IO memory inside user mode linux - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: RidgeRun, Inc. - * Greg Lonnon glonnon@ridgerun.com or info@ridgerun.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <stdio.h> -#include <stdlib.h> -#include <stddef.h> -#include <stdarg.h> -#include <unistd.h> -#include <errno.h> -#include <string.h> -#include <fcntl.h> -#include <sys/types.h> -#include <sys/mman.h> -#include "kern_util.h" -#include "user.h" -#include "user_util.h" -#include "mem_user.h" -#include "init.h" -#include "os.h" -#include "tempfile.h" -#include "kern_constants.h" - -#define TEMPNAME_TEMPLATE "vm_file-XXXXXX" - -static int create_tmp_file(unsigned long len) -{ - int fd, err; - char zero; - - fd = make_tempfile(TEMPNAME_TEMPLATE, NULL, 1); - if(fd < 0) { - os_print_error(fd, "make_tempfile"); - exit(1); - } - - err = os_mode_fd(fd, 0777); - if(err < 0){ - os_print_error(err, "os_mode_fd"); - exit(1); - } - err = os_seek_file(fd, len); - if(err < 0){ - os_print_error(err, "os_seek_file"); - exit(1); - } - zero = 0; - err = os_write_file(fd, &zero, 1); - if(err != 1){ - os_print_error(err, "os_write_file"); - exit(1); - } - - return(fd); -} - -void check_tmpexec(void) -{ - void *addr; - int err, fd = create_tmp_file(UM_KERN_PAGE_SIZE); - - addr = mmap(NULL, UM_KERN_PAGE_SIZE, - PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE, fd, 0); - printf("Checking PROT_EXEC mmap in /tmp..."); - fflush(stdout); - if(addr == MAP_FAILED){ - err = errno; - perror("failed"); - if(err == EPERM) - printf("/tmp must be not mounted noexec\n"); - exit(1); - } - printf("OK\n"); - munmap(addr, UM_KERN_PAGE_SIZE); - - os_close_file(fd); -} - -static int have_devanon = 0; - -void check_devanon(void) -{ - int fd; - - printk("Checking for /dev/anon on the host..."); - fd = open("/dev/anon", O_RDWR); - if(fd < 0){ - printk("Not available (open failed with errno %d)\n", errno); - return; - } - - printk("OK\n"); - have_devanon = 1; -} - -static int create_anon_file(unsigned long len) -{ - void *addr; - int fd; - - fd = open("/dev/anon", O_RDWR); - if(fd < 0) { - os_print_error(fd, "opening /dev/anon"); - exit(1); - } - - addr = mmap(NULL, len, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); - if(addr == MAP_FAILED){ - perror("mapping physmem file"); - exit(1); - } - munmap(addr, len); - - return(fd); -} - -int create_mem_file(unsigned long len) -{ - int err, fd; - - if(have_devanon) - fd = create_anon_file(len); - else fd = create_tmp_file(len); - - err = os_set_exec_close(fd, 1); - if(err < 0) - os_print_error(err, "exec_close"); - return(fd); -} - -struct iomem_region *iomem_regions = NULL; -int iomem_size = 0; - -static int __init parse_iomem(char *str, int *add) -{ - struct iomem_region *new; - struct uml_stat buf; - char *file, *driver; - int fd, err, size; - - driver = str; - file = strchr(str,','); - if(file == NULL){ - printf("parse_iomem : failed to parse iomem\n"); - goto out; - } - *file = '\0'; - file++; - fd = os_open_file(file, of_rdwr(OPENFLAGS()), 0); - if(fd < 0){ - os_print_error(fd, "parse_iomem - Couldn't open io file"); - goto out; - } - - err = os_stat_fd(fd, &buf); - if(err < 0){ - os_print_error(err, "parse_iomem - cannot stat_fd file"); - goto out_close; - } - - new = malloc(sizeof(*new)); - if(new == NULL){ - perror("Couldn't allocate iomem_region struct"); - goto out_close; - } - - size = (buf.ust_size + UM_KERN_PAGE_SIZE) & ~(UM_KERN_PAGE_SIZE - 1); - - *new = ((struct iomem_region) { .next = iomem_regions, - .driver = driver, - .fd = fd, - .size = size, - .phys = 0, - .virt = 0 }); - iomem_regions = new; - iomem_size += new->size + UM_KERN_PAGE_SIZE; - - return(0); - out_close: - os_close_file(fd); - out: - return(1); -} - -__uml_setup("iomem=", parse_iomem, -"iomem=<name>,<file>\n" -" Configure <file> as an IO memory region named <name>.\n\n" -); - -int protect_memory(unsigned long addr, unsigned long len, int r, int w, int x, - int must_succeed) -{ - int err; - - err = os_protect_memory((void *) addr, len, r, w, x); - if(err < 0){ - if(must_succeed) - panic("protect failed, err = %d", -err); - else return(err); - } - return(0); -} - -#if 0 -/* Debugging facility for dumping stuff out to the host, avoiding the timing - * problems that come with printf and breakpoints. - * Enable in case of emergency. - */ - -int logging = 1; -int logging_fd = -1; - -int logging_line = 0; -char logging_buf[512]; - -void log(char *fmt, ...) -{ - va_list ap; - struct timeval tv; - struct openflags flags; - - if(logging == 0) return; - if(logging_fd < 0){ - flags = of_create(of_trunc(of_rdwr(OPENFLAGS()))); - logging_fd = os_open_file("log", flags, 0644); - } - gettimeofday(&tv, NULL); - sprintf(logging_buf, "%d\t %u.%u ", logging_line++, tv.tv_sec, - tv.tv_usec); - va_start(ap, fmt); - vsprintf(&logging_buf[strlen(logging_buf)], fmt, ap); - va_end(ap); - write(logging_fd, logging_buf, strlen(logging_buf)); -} -#endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process_kern.c index c23d8a08d0f..39cf568ccfa 100644 --- a/arch/um/kernel/process_kern.c +++ b/arch/um/kernel/process_kern.c @@ -113,8 +113,23 @@ void set_current(void *t) void *_switch_to(void *prev, void *next, void *last) { - return(CHOOSE_MODE(switch_to_tt(prev, next), - switch_to_skas(prev, next))); + struct task_struct *from = prev; + struct task_struct *to= next; + + to->thread.prev_sched = from; + set_current(to); + + do { + current->thread.saved_task = NULL ; + CHOOSE_MODE_PROC(switch_to_tt, switch_to_skas, prev, next); + if(current->thread.saved_task) + show_regs(&(current->thread.regs)); + next= current->thread.saved_task; + prev= current; + } while(current->thread.saved_task); + + return(current->thread.prev_sched); + } void interrupt_end(void) diff --git a/arch/um/kernel/skas/include/mode_kern-skas.h b/arch/um/kernel/skas/include/mode_kern-skas.h index e4849002811..c97a80dfe37 100644 --- a/arch/um/kernel/skas/include/mode_kern-skas.h +++ b/arch/um/kernel/skas/include/mode_kern-skas.h @@ -11,7 +11,7 @@ #include "asm/ptrace.h" extern void flush_thread_skas(void); -extern void *switch_to_skas(void *prev, void *next); +extern void switch_to_skas(void *prev, void *next); extern void start_thread_skas(struct pt_regs *regs, unsigned long eip, unsigned long esp); extern int copy_thread_skas(int nr, unsigned long clone_flags, diff --git a/arch/um/kernel/skas/include/uaccess-skas.h b/arch/um/kernel/skas/include/uaccess-skas.h index 6ee3f3902e6..7da0c2def0e 100644 --- a/arch/um/kernel/skas/include/uaccess-skas.h +++ b/arch/um/kernel/skas/include/uaccess-skas.h @@ -18,12 +18,6 @@ ((unsigned long) (addr) + (size) <= FIXADDR_USER_END) && \ ((unsigned long) (addr) + (size) >= (unsigned long)(addr)))) -static inline int verify_area_skas(int type, const void __user * addr, - unsigned long size) -{ - return(access_ok_skas(type, addr, size) ? 0 : -EFAULT); -} - extern int copy_from_user_skas(void *to, const void __user *from, int n); extern int copy_to_user_skas(void __user *to, const void *from, int n); extern int strncpy_from_user_skas(char *dst, const char __user *src, int count); diff --git a/arch/um/kernel/skas/process_kern.c b/arch/um/kernel/skas/process_kern.c index 3d1b227226e..efe92e8aa2a 100644 --- a/arch/um/kernel/skas/process_kern.c +++ b/arch/um/kernel/skas/process_kern.c @@ -24,7 +24,7 @@ #include "proc_mm.h" #include "registers.h" -void *switch_to_skas(void *prev, void *next) +void switch_to_skas(void *prev, void *next) { struct task_struct *from, *to; @@ -35,16 +35,11 @@ void *switch_to_skas(void *prev, void *next) if(current->pid == 0) switch_timers(0); - to->thread.prev_sched = from; - set_current(to); - switch_threads(&from->thread.mode.skas.switch_buf, to->thread.mode.skas.switch_buf); if(current->pid == 0) switch_timers(1); - - return(current->thread.prev_sched); } extern void schedule_tail(struct task_struct *prev); diff --git a/arch/um/kernel/tempfile.c b/arch/um/kernel/tempfile.c deleted file mode 100644 index b1674bc1395..00000000000 --- a/arch/um/kernel/tempfile.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include <stdio.h> -#include <stdlib.h> -#include <unistd.h> -#include <string.h> -#include <errno.h> -#include <sys/param.h> -#include "init.h" - -/* Modified from create_mem_file and start_debugger */ -static char *tempdir = NULL; - -static void __init find_tempdir(void) -{ - char *dirs[] = { "TMP", "TEMP", "TMPDIR", NULL }; - int i; - char *dir = NULL; - - if(tempdir != NULL) return; /* We've already been called */ - for(i = 0; dirs[i]; i++){ - dir = getenv(dirs[i]); - if((dir != NULL) && (*dir != '\0')) - break; - } - if((dir == NULL) || (*dir == '\0')) - dir = "/tmp"; - - tempdir = malloc(strlen(dir) + 2); - if(tempdir == NULL){ - fprintf(stderr, "Failed to malloc tempdir, " - "errno = %d\n", errno); - return; - } - strcpy(tempdir, dir); - strcat(tempdir, "/"); -} - -int make_tempfile(const char *template, char **out_tempname, int do_unlink) -{ - char tempname[MAXPATHLEN]; - int fd; - - find_tempdir(); - if (*template != '/') - strcpy(tempname, tempdir); - else - *tempname = 0; - strcat(tempname, template); - fd = mkstemp(tempname); - if(fd < 0){ - fprintf(stderr, "open - cannot create %s: %s\n", tempname, - strerror(errno)); - return -1; - } - if(do_unlink && (unlink(tempname) < 0)){ - perror("unlink"); - return -1; - } - if(out_tempname){ - *out_tempname = strdup(tempname); - if(*out_tempname == NULL){ - perror("strdup"); - return -1; - } - } - return(fd); -} - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/tlb.c b/arch/um/kernel/tlb.c index 80ed6188e8a..0a562c3c0fd 100644 --- a/arch/um/kernel/tlb.c +++ b/arch/um/kernel/tlb.c @@ -307,7 +307,7 @@ int flush_tlb_kernel_range_common(unsigned long start, unsigned long end) } else if(pte_newprot(*pte)){ updated = 1; - protect_memory(addr, PAGE_SIZE, 1, 1, 1, 1); + os_protect_memory((void *) addr, PAGE_SIZE, 1, 1, 1); } addr += PAGE_SIZE; } diff --git a/arch/um/kernel/tt/include/mode_kern-tt.h b/arch/um/kernel/tt/include/mode_kern-tt.h index e0ca0e0b251..2a35b15c5fe 100644 --- a/arch/um/kernel/tt/include/mode_kern-tt.h +++ b/arch/um/kernel/tt/include/mode_kern-tt.h @@ -11,7 +11,7 @@ #include "asm/ptrace.h" #include "asm/uaccess.h" -extern void *switch_to_tt(void *prev, void *next); +extern void switch_to_tt(void *prev, void *next); extern void flush_thread_tt(void); extern void start_thread_tt(struct pt_regs *regs, unsigned long eip, unsigned long esp); diff --git a/arch/um/kernel/tt/include/uaccess-tt.h b/arch/um/kernel/tt/include/uaccess-tt.h index aa6db384af8..dc2ebfa8c54 100644 --- a/arch/um/kernel/tt/include/uaccess-tt.h +++ b/arch/um/kernel/tt/include/uaccess-tt.h @@ -33,12 +33,6 @@ extern unsigned long uml_physmem; (((unsigned long) (addr) <= ((unsigned long) (addr) + (size))) && \ (under_task_size(addr, size) || is_stack(addr, size)))) -static inline int verify_area_tt(int type, const void __user * addr, - unsigned long size) -{ - return(access_ok_tt(type, addr, size) ? 0 : -EFAULT); -} - extern unsigned long get_fault_addr(void); extern int __do_copy_from_user(void *to, const void *from, int n, diff --git a/arch/um/kernel/tt/mem_user.c b/arch/um/kernel/tt/mem_user.c index 3085267459b..03e58989538 100644 --- a/arch/um/kernel/tt/mem_user.c +++ b/arch/um/kernel/tt/mem_user.c @@ -12,6 +12,7 @@ #include "tt.h" #include "mem_user.h" #include "user_util.h" +#include "os.h" void remap_data(void *segment_start, void *segment_end, int w) { diff --git a/arch/um/kernel/tt/process_kern.c b/arch/um/kernel/tt/process_kern.c index a189a2b9293..cfaa373a6e7 100644 --- a/arch/um/kernel/tt/process_kern.c +++ b/arch/um/kernel/tt/process_kern.c @@ -23,10 +23,11 @@ #include "mem_user.h" #include "tlb.h" #include "mode.h" +#include "mode_kern.h" #include "init.h" #include "tt.h" -void *switch_to_tt(void *prev, void *next, void *last) +void switch_to_tt(void *prev, void *next) { struct task_struct *from, *to, *prev_sched; unsigned long flags; @@ -36,8 +37,6 @@ void *switch_to_tt(void *prev, void *next, void *last) from = prev; to = next; - to->thread.prev_sched = from; - cpu = from->thread_info->cpu; if(cpu == 0) forward_interrupts(to->thread.mode.tt.extern_pid); @@ -53,7 +52,6 @@ void *switch_to_tt(void *prev, void *next, void *last) forward_pending_sigio(to->thread.mode.tt.extern_pid); c = 0; - set_current(to); err = os_write_file(to->thread.mode.tt.switch_pipe[1], &c, sizeof(c)); if(err != sizeof(c)) @@ -85,8 +83,6 @@ void *switch_to_tt(void *prev, void *next, void *last) flush_tlb_all(); local_irq_restore(flags); - - return(current->thread.prev_sched); } void release_thread_tt(struct task_struct *task) diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 09f6f7ce469..f0a275947d3 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -361,11 +361,6 @@ int linux_main(int argc, char **argv) uml_start = CHOOSE_MODE_PROC(set_task_sizes_tt, set_task_sizes_skas, 0, &host_task_size, &task_size); - /* Need to check this early because mmapping happens before the - * kernel is running. - */ - check_tmpexec(); - brk_start = (unsigned long) sbrk(0); CHOOSE_MODE_PROC(before_mem_tt, before_mem_skas, brk_start); /* Increase physical memory size for exec-shield users diff --git a/arch/um/kernel/user_util.c b/arch/um/kernel/user_util.c index 954ff67cc8b..41d17c71511 100644 --- a/arch/um/kernel/user_util.c +++ b/arch/um/kernel/user_util.c @@ -109,18 +109,14 @@ int raw(int fd) int err; CATCH_EINTR(err = tcgetattr(fd, &tt)); - if (err < 0) { - printk("tcgetattr failed, errno = %d\n", errno); - return(-errno); - } + if(err < 0) + return -errno; cfmakeraw(&tt); CATCH_EINTR(err = tcsetattr(fd, TCSADRAIN, &tt)); - if (err < 0) { - printk("tcsetattr failed, errno = %d\n", errno); - return(-errno); - } + if(err < 0) + return -errno; /* XXX tcsetattr could have applied only some changes * (and cfmakeraw() is a set of changes) */ @@ -132,6 +128,12 @@ void setup_machinename(char *machine_out) struct utsname host; uname(&host); +#if defined(UML_CONFIG_UML_X86) && !defined(UML_CONFIG_64BIT) + if (!strcmp(host.machine, "x86_64")) { + strcpy(machine_out, "i686"); + return; + } +#endif strcpy(machine_out, host.machine); } diff --git a/arch/um/os-Linux/Makefile b/arch/um/os-Linux/Makefile index 7a1662419c0..d15ec2af6a2 100644 --- a/arch/um/os-Linux/Makefile +++ b/arch/um/os-Linux/Makefile @@ -3,11 +3,11 @@ # Licensed under the GPL # -obj-y = aio.o elf_aux.o file.o process.o signal.o start_up.o time.o tt.o \ - tty.o user_syms.o drivers/ sys-$(SUBARCH)/ +obj-y = aio.o elf_aux.o file.o mem.o process.o signal.o start_up.o time.o \ + tt.o tty.o user_syms.o drivers/ sys-$(SUBARCH)/ -USER_OBJS := aio.o elf_aux.o file.o process.o signal.o start_up.o time.o tt.o \ - tty.o +USER_OBJS := aio.o elf_aux.o file.o mem.o process.o signal.o start_up.o \ + time.o tt.o tty.o elf_aux.o: $(ARCH_DIR)/kernel-offsets.h CFLAGS_elf_aux.o += -I$(objtree)/arch/um diff --git a/arch/um/os-Linux/aio.c b/arch/um/os-Linux/aio.c index b04897cd995..f6e64026f99 100644 --- a/arch/um/os-Linux/aio.c +++ b/arch/um/os-Linux/aio.c @@ -117,6 +117,8 @@ static int do_aio(aio_context_t ctx, struct aio_context *aio) err = io_submit(ctx, 1, &iocbp); if(err > 0) err = 0; + else + err = -errno; out: return err; @@ -142,7 +144,8 @@ static int aio_thread(void *arg) "errno = %d\n", errno); } else { - aio = (struct aio_context *) event.data; + /* This is safe as we've just a pointer here. */ + aio = (struct aio_context *) (long) event.data; if(update_aio(aio, event.res)){ do_aio(ctx, aio); continue; @@ -313,15 +316,16 @@ static int init_aio_26(void) int err; if(io_setup(256, &ctx)){ + err = -errno; printk("aio_thread failed to initialize context, err = %d\n", errno); - return -errno; + return err; } err = run_helper_thread(aio_thread, NULL, CLONE_FILES | CLONE_VM | SIGCHLD, &stack, 0); if(err < 0) - return -errno; + return err; aio_pid = err; diff --git a/arch/um/os-Linux/drivers/tuntap_user.c b/arch/um/os-Linux/drivers/tuntap_user.c index 4b83c6c3f48..4ba9b17adf1 100644 --- a/arch/um/os-Linux/drivers/tuntap_user.c +++ b/arch/um/os-Linux/drivers/tuntap_user.c @@ -75,7 +75,7 @@ static int tuntap_open_tramp(char *gate, int *fd_out, int me, int remote, struct msghdr msg; struct cmsghdr *cmsg; struct iovec iov; - int pid, n; + int pid, n, err; sprintf(version_buf, "%d", UML_NET_VERSION); @@ -105,9 +105,10 @@ static int tuntap_open_tramp(char *gate, int *fd_out, int me, int remote, n = recvmsg(me, &msg, 0); *used_out = n; if(n < 0){ + err = -errno; printk("tuntap_open_tramp : recvmsg failed - errno = %d\n", errno); - return(-errno); + return err; } CATCH_EINTR(waitpid(pid, NULL, 0)); @@ -147,9 +148,10 @@ static int tuntap_open(void *data) ifr.ifr_flags = IFF_TAP | IFF_NO_PI; strlcpy(ifr.ifr_name, pri->dev_name, sizeof(ifr.ifr_name)); if(ioctl(pri->fd, TUNSETIFF, (void *) &ifr) < 0){ + err = -errno; printk("TUNSETIFF failed, errno = %d\n", errno); os_close_file(pri->fd); - return(-errno); + return err; } } else { diff --git a/arch/um/os-Linux/elf_aux.c b/arch/um/os-Linux/elf_aux.c index 1399520a858..ab33cb3c74e 100644 --- a/arch/um/os-Linux/elf_aux.c +++ b/arch/um/os-Linux/elf_aux.c @@ -14,7 +14,8 @@ #include "mem_user.h" #include <kernel-offsets.h> -#if HOST_ELF_CLASS == ELFCLASS32 +/* Use the one from the kernel - the host may miss it, if having old headers. */ +#if UM_ELF_CLASS == UM_ELFCLASS32 typedef Elf32_auxv_t elf_auxv_t; #else typedef Elf64_auxv_t elf_auxv_t; @@ -54,7 +55,8 @@ __init void scan_elf_aux( char **envp) * a_un, so we have to use a_val, which is * all that's left. */ - elf_aux_platform = (char *) auxv->a_un.a_val; + elf_aux_platform = + (char *) (long) auxv->a_un.a_val; break; case AT_PAGESZ: page_size = auxv->a_un.a_val; diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c index fd45bb26090..f55773c819e 100644 --- a/arch/um/os-Linux/file.c +++ b/arch/um/os-Linux/file.c @@ -119,15 +119,11 @@ int os_window_size(int fd, int *rows, int *cols) int os_new_tty_pgrp(int fd, int pid) { - if(ioctl(fd, TIOCSCTTY, 0) < 0){ - printk("TIOCSCTTY failed, errno = %d\n", errno); - return(-errno); - } + if(ioctl(fd, TIOCSCTTY, 0) < 0) + return -errno; - if(tcsetpgrp(fd, pid) < 0){ - printk("tcsetpgrp failed, errno = %d\n", errno); - return(-errno); - } + if(tcsetpgrp(fd, pid) < 0) + return -errno; return(0); } @@ -146,18 +142,12 @@ int os_set_slip(int fd) int disc, sencap; disc = N_SLIP; - if(ioctl(fd, TIOCSETD, &disc) < 0){ - printk("Failed to set slip line discipline - " - "errno = %d\n", errno); - return(-errno); - } + if(ioctl(fd, TIOCSETD, &disc) < 0) + return -errno; sencap = 0; - if(ioctl(fd, SIOCSIFENCAP, &sencap) < 0){ - printk("Failed to set slip encapsulation - " - "errno = %d\n", errno); - return(-errno); - } + if(ioctl(fd, SIOCSIFENCAP, &sencap) < 0) + return -errno; return(0); } @@ -180,22 +170,15 @@ int os_sigio_async(int master, int slave) int flags; flags = fcntl(master, F_GETFL); - if(flags < 0) { - printk("fcntl F_GETFL failed, errno = %d\n", errno); - return(-errno); - } + if(flags < 0) + return errno; if((fcntl(master, F_SETFL, flags | O_NONBLOCK | O_ASYNC) < 0) || - (fcntl(master, F_SETOWN, os_getpid()) < 0)){ - printk("fcntl F_SETFL or F_SETOWN failed, errno = %d\n", - errno); - return(-errno); - } + (fcntl(master, F_SETOWN, os_getpid()) < 0)) + return -errno; - if((fcntl(slave, F_SETFL, flags | O_NONBLOCK) < 0)){ - printk("fcntl F_SETFL failed, errno = %d\n", errno); - return(-errno); - } + if((fcntl(slave, F_SETFL, flags | O_NONBLOCK) < 0)) + return -errno; return(0); } @@ -255,7 +238,7 @@ int os_file_mode(char *file, struct openflags *mode_out) int os_open_file(char *file, struct openflags flags, int mode) { - int fd, f = 0; + int fd, err, f = 0; if(flags.r && flags.w) f = O_RDWR; else if(flags.r) f = O_RDONLY; @@ -272,8 +255,9 @@ int os_open_file(char *file, struct openflags flags, int mode) return(-errno); if(flags.cl && fcntl(fd, F_SETFD, 1)){ + err = -errno; os_close_file(fd); - return(-errno); + return err; } return(fd); @@ -383,9 +367,9 @@ int os_file_size(char *file, unsigned long long *size_out) return(fd); } if(ioctl(fd, BLKGETSIZE, &blocks) < 0){ + err = -errno; printk("Couldn't get the block size of \"%s\", " "errno = %d\n", file, errno); - err = -errno; os_close_file(fd); return(err); } @@ -473,11 +457,14 @@ int os_pipe(int *fds, int stream, int close_on_exec) int os_set_fd_async(int fd, int owner) { + int err; + /* XXX This should do F_GETFL first */ if(fcntl(fd, F_SETFL, O_ASYNC | O_NONBLOCK) < 0){ + err = -errno; printk("os_set_fd_async : failed to set O_ASYNC and " "O_NONBLOCK on fd # %d, errno = %d\n", fd, errno); - return(-errno); + return err; } #ifdef notdef if(fcntl(fd, F_SETFD, 1) < 0){ @@ -488,10 +475,11 @@ int os_set_fd_async(int fd, int owner) if((fcntl(fd, F_SETSIG, SIGIO) < 0) || (fcntl(fd, F_SETOWN, owner) < 0)){ + err = -errno; printk("os_set_fd_async : Failed to fcntl F_SETOWN " "(or F_SETSIG) fd %d to pid %d, errno = %d\n", fd, owner, errno); - return(-errno); + return err; } return(0); @@ -516,11 +504,9 @@ int os_set_fd_block(int fd, int blocking) if(blocking) flags &= ~O_NONBLOCK; else flags |= O_NONBLOCK; - if(fcntl(fd, F_SETFL, flags) < 0){ - printk("Failed to change blocking on fd # %d, errno = %d\n", - fd, errno); - return(-errno); - } + if(fcntl(fd, F_SETFL, flags) < 0) + return -errno; + return(0); } @@ -609,11 +595,8 @@ int os_create_unix_socket(char *file, int len, int close_on_exec) int sock, err; sock = socket(PF_UNIX, SOCK_DGRAM, 0); - if (sock < 0){ - printk("create_unix_socket - socket failed, errno = %d\n", - errno); - return(-errno); - } + if(sock < 0) + return -errno; if(close_on_exec) { err = os_set_exec_close(sock, 1); @@ -628,11 +611,8 @@ int os_create_unix_socket(char *file, int len, int close_on_exec) snprintf(addr.sun_path, len, "%s", file); err = bind(sock, (struct sockaddr *) &addr, sizeof(addr)); - if (err < 0){ - printk("create_listening_socket at '%s' - bind failed, " - "errno = %d\n", file, errno); - return(-errno); - } + if(err < 0) + return -errno; return(sock); } diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c new file mode 100644 index 00000000000..8e71edaaf80 --- /dev/null +++ b/arch/um/os-Linux/mem.c @@ -0,0 +1,161 @@ +#include <stdio.h> +#include <stdlib.h> +#include <stddef.h> +#include <stdarg.h> +#include <unistd.h> +#include <errno.h> +#include <string.h> +#include <fcntl.h> +#include <sys/types.h> +#include <sys/mman.h> +#include "kern_util.h" +#include "user.h" +#include "user_util.h" +#include "mem_user.h" +#include "init.h" +#include "os.h" +#include "tempfile.h" +#include "kern_constants.h" + +#include <sys/param.h> + +static char *tempdir = NULL; + +static void __init find_tempdir(void) +{ + char *dirs[] = { "TMP", "TEMP", "TMPDIR", NULL }; + int i; + char *dir = NULL; + + if(tempdir != NULL) return; /* We've already been called */ + for(i = 0; dirs[i]; i++){ + dir = getenv(dirs[i]); + if((dir != NULL) && (*dir != '\0')) + break; + } + if((dir == NULL) || (*dir == '\0')) + dir = "/tmp"; + + tempdir = malloc(strlen(dir) + 2); + if(tempdir == NULL){ + fprintf(stderr, "Failed to malloc tempdir, " + "errno = %d\n", errno); + return; + } + strcpy(tempdir, dir); + strcat(tempdir, "/"); +} + +/* + * This proc still used in tt-mode + * (file: kernel/tt/ptproxy/proxy.c, proc: start_debugger). + * So it isn't 'static' yet. + */ +int make_tempfile(const char *template, char **out_tempname, int do_unlink) +{ + char tempname[MAXPATHLEN]; + int fd; + + find_tempdir(); + if (*template != '/') + strcpy(tempname, tempdir); + else + *tempname = 0; + strcat(tempname, template); + fd = mkstemp(tempname); + if(fd < 0){ + fprintf(stderr, "open - cannot create %s: %s\n", tempname, + strerror(errno)); + return -1; + } + if(do_unlink && (unlink(tempname) < 0)){ + perror("unlink"); + return -1; + } + if(out_tempname){ + *out_tempname = strdup(tempname); + if(*out_tempname == NULL){ + perror("strdup"); + return -1; + } + } + return(fd); +} + +#define TEMPNAME_TEMPLATE "vm_file-XXXXXX" + +/* + * This proc is used in start_up.c + * So it isn't 'static'. + */ +int create_tmp_file(unsigned long len) +{ + int fd, err; + char zero; + + fd = make_tempfile(TEMPNAME_TEMPLATE, NULL, 1); + if(fd < 0) { + exit(1); + } + + err = fchmod(fd, 0777); + if(err < 0){ + perror("os_mode_fd"); + exit(1); + } + + if (lseek64(fd, len, SEEK_SET) < 0) { + perror("os_seek_file"); + exit(1); + } + + zero = 0; + + err = os_write_file(fd, &zero, 1); + if(err != 1){ + errno = -err; + perror("os_write_file"); + exit(1); + } + + return(fd); +} + +static int create_anon_file(unsigned long len) +{ + void *addr; + int fd; + + fd = open("/dev/anon", O_RDWR); + if(fd < 0) { + perror("opening /dev/anon"); + exit(1); + } + + addr = mmap(NULL, len, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); + if(addr == MAP_FAILED){ + perror("mapping physmem file"); + exit(1); + } + munmap(addr, len); + + return(fd); +} + +extern int have_devanon; + +int create_mem_file(unsigned long len) +{ + int err, fd; + + if(have_devanon) + fd = create_anon_file(len); + else fd = create_tmp_file(len); + + err = os_set_exec_close(fd, 1); + if(err < 0){ + errno = -err; + perror("exec_close"); + } + return(fd); +} diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c index d32413e4b4c..d9c52387c4a 100644 --- a/arch/um/os-Linux/process.c +++ b/arch/um/os-Linux/process.c @@ -3,6 +3,7 @@ * Licensed under the GPL */ +#include <unistd.h> #include <stdio.h> #include <errno.h> #include <signal.h> diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c index 040cc1472bc..6af83171ca4 100644 --- a/arch/um/os-Linux/start_up.c +++ b/arch/um/os-Linux/start_up.c @@ -4,18 +4,22 @@ */ #include <stdio.h> +#include <stddef.h> +#include <stdarg.h> +#include <stdlib.h> +#include <string.h> #include <unistd.h> #include <signal.h> #include <sched.h> +#include <fcntl.h> #include <errno.h> -#include <stdarg.h> -#include <stdlib.h> #include <setjmp.h> #include <sys/time.h> #include <sys/wait.h> #include <sys/mman.h> #include <asm/unistd.h> #include <asm/page.h> +#include <sys/types.h> #include "user_util.h" #include "kern_util.h" #include "user.h" @@ -25,6 +29,7 @@ #include "sysdep/sigcontext.h" #include "irq_user.h" #include "ptrace_user.h" +#include "mem_user.h" #include "time_user.h" #include "init.h" #include "os.h" @@ -32,6 +37,8 @@ #include "choose-mode.h" #include "mode.h" #include "tempfile.h" +#include "kern_constants.h" + #ifdef UML_CONFIG_MODE_SKAS #include "skas.h" #include "skas_ptrace.h" @@ -276,9 +283,38 @@ static void __init check_ptrace(void) check_sysemu(); } +extern int create_tmp_file(unsigned long len); + +static void check_tmpexec(void) +{ + void *addr; + int err, fd = create_tmp_file(UM_KERN_PAGE_SIZE); + + addr = mmap(NULL, UM_KERN_PAGE_SIZE, + PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE, fd, 0); + printf("Checking PROT_EXEC mmap in /tmp..."); + fflush(stdout); + if(addr == MAP_FAILED){ + err = errno; + perror("failed"); + if(err == EPERM) + printf("/tmp must be not mounted noexec\n"); + exit(1); + } + printf("OK\n"); + munmap(addr, UM_KERN_PAGE_SIZE); + + close(fd); +} + void os_early_checks(void) { check_ptrace(); + + /* Need to check this early because mmapping happens before the + * kernel is running. + */ + check_tmpexec(); } static int __init noprocmm_cmd_param(char *str, int* add) @@ -357,3 +393,72 @@ int can_do_skas(void) return(0); } #endif + +int have_devanon = 0; + +void check_devanon(void) +{ + int fd; + + printk("Checking for /dev/anon on the host..."); + fd = open("/dev/anon", O_RDWR); + if(fd < 0){ + printk("Not available (open failed with errno %d)\n", errno); + return; + } + + printk("OK\n"); + have_devanon = 1; +} + +int __init parse_iomem(char *str, int *add) +{ + struct iomem_region *new; + struct uml_stat buf; + char *file, *driver; + int fd, err, size; + + driver = str; + file = strchr(str,','); + if(file == NULL){ + printf("parse_iomem : failed to parse iomem\n"); + goto out; + } + *file = '\0'; + file++; + fd = os_open_file(file, of_rdwr(OPENFLAGS()), 0); + if(fd < 0){ + os_print_error(fd, "parse_iomem - Couldn't open io file"); + goto out; + } + + err = os_stat_fd(fd, &buf); + if(err < 0){ + os_print_error(err, "parse_iomem - cannot stat_fd file"); + goto out_close; + } + + new = malloc(sizeof(*new)); + if(new == NULL){ + perror("Couldn't allocate iomem_region struct"); + goto out_close; + } + + size = (buf.ust_size + UM_KERN_PAGE_SIZE) & ~(UM_KERN_PAGE_SIZE - 1); + + *new = ((struct iomem_region) { .next = iomem_regions, + .driver = driver, + .fd = fd, + .size = size, + .phys = 0, + .virt = 0 }); + iomem_regions = new; + iomem_size += new->size + UM_KERN_PAGE_SIZE; + + return(0); + out_close: + os_close_file(fd); + out: + return(1); +} + diff --git a/arch/um/os-Linux/tt.c b/arch/um/os-Linux/tt.c index 5b047ab8416..a6db8877931 100644 --- a/arch/um/os-Linux/tt.c +++ b/arch/um/os-Linux/tt.c @@ -36,6 +36,20 @@ #include "mode.h" #include "tempfile.h" +int protect_memory(unsigned long addr, unsigned long len, int r, int w, int x, + int must_succeed) +{ + int err; + + err = os_protect_memory((void *) addr, len, r, w, x); + if(err < 0){ + if(must_succeed) + panic("protect failed, err = %d", -err); + else return(err); + } + return(0); +} + /* *------------------------- * only for tt mode (will be deleted in future...) diff --git a/arch/um/sys-i386/ldt.c b/arch/um/sys-i386/ldt.c index bd3c34aa52e..36b5c2c1328 100644 --- a/arch/um/sys-i386/ldt.c +++ b/arch/um/sys-i386/ldt.c @@ -83,6 +83,7 @@ int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount) goto out; } p = buf; + break; default: res = -ENOSYS; goto out; diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index e63323e03ea..21afa69a086 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -277,11 +277,6 @@ source "mm/Kconfig" config HAVE_ARCH_EARLY_PFN_TO_NID def_bool y -config HAVE_DEC_LOCK - bool - depends on SMP - default y - config NR_CPUS int "Maximum number of CPUs (2-256)" range 2 256 @@ -313,7 +308,7 @@ config HPET_TIMER present. The HPET provides a stable time base on SMP systems, unlike the TSC, but it is more expensive to access, as it is off-chip. You can find the HPET spec at - <http://www.intel.com/labs/platcomp/hpet/hpetspec.htm>. + <http://www.intel.com/hardwaredesign/hpetspec.htm>. config X86_PM_TIMER bool "PM timer" diff --git a/arch/x86_64/ia32/ia32_binfmt.c b/arch/x86_64/ia32/ia32_binfmt.c index c8131f342cf..d9161e39597 100644 --- a/arch/x86_64/ia32/ia32_binfmt.c +++ b/arch/x86_64/ia32/ia32_binfmt.c @@ -353,11 +353,6 @@ int setup_arg_pages(struct linux_binprm *bprm, unsigned long stack_top, int exec mpnt = kmem_cache_alloc(vm_area_cachep, SLAB_KERNEL); if (!mpnt) return -ENOMEM; - - if (security_vm_enough_memory((IA32_STACK_TOP - (PAGE_MASK & (unsigned long) bprm->p))>>PAGE_SHIFT)) { - kmem_cache_free(vm_area_cachep, mpnt); - return -ENOMEM; - } memset(mpnt, 0, sizeof(*mpnt)); diff --git a/arch/x86_64/ia32/syscall32.c b/arch/x86_64/ia32/syscall32.c index adbc5f8089e..3a01329473a 100644 --- a/arch/x86_64/ia32/syscall32.c +++ b/arch/x86_64/ia32/syscall32.c @@ -52,17 +52,13 @@ int syscall32_setup_pages(struct linux_binprm *bprm, int exstack) vma = kmem_cache_alloc(vm_area_cachep, SLAB_KERNEL); if (!vma) return -ENOMEM; - if (security_vm_enough_memory(npages)) { - kmem_cache_free(vm_area_cachep, vma); - return -ENOMEM; - } memset(vma, 0, sizeof(struct vm_area_struct)); /* Could randomize here */ vma->vm_start = VSYSCALL32_BASE; vma->vm_end = VSYSCALL32_END; /* MAYWRITE to allow gdb to COW and set breakpoints */ - vma->vm_flags = VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYEXEC|VM_MAYEXEC|VM_MAYWRITE; + vma->vm_flags = VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYEXEC|VM_MAYWRITE; vma->vm_flags |= mm->def_flags; vma->vm_page_prot = protection_map[vma->vm_flags & 7]; vma->vm_ops = &syscall32_vm_ops; diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c index 4e34b0f9d61..ab3f87aaff7 100644 --- a/arch/x86_64/kernel/e820.c +++ b/arch/x86_64/kernel/e820.c @@ -17,6 +17,8 @@ #include <linux/ioport.h> #include <linux/string.h> #include <linux/kexec.h> +#include <linux/module.h> + #include <asm/page.h> #include <asm/e820.h> #include <asm/proto.h> diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index 522944a000a..c8eee20cd51 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -299,15 +299,6 @@ void __init check_ioapic(void) #endif /* RED-PEN skip them on mptables too? */ return; - case PCI_VENDOR_ID_ATI: - /* All timer interrupts on atiixp - are doubled. Disable one. */ - if (disable_timer_pin_1 == 0) { - disable_timer_pin_1 = 1; - printk(KERN_INFO - "ATI board detected. Disabling timer pin 1.\n"); - } - return; } /* No multi-function device? */ diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 351d8d64c2f..238f73e1a83 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -831,11 +831,26 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) #endif } +#define HWCR 0xc0010015 + static int __init init_amd(struct cpuinfo_x86 *c) { int r; int level; +#ifdef CONFIG_SMP + unsigned long value; + + // Disable TLB flush filter by setting HWCR.FFDIS: + // bit 6 of msr C001_0015 + // + // Errata 63 for SH-B3 steppings + // Errata 122 for all(?) steppings + rdmsrl(HWCR, value); + value |= 1 << 6; + wrmsrl(HWCR, value); +#endif + /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ clear_bit(0*32+31, &c->x86_capability); diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c index 68ec03070e5..fd99ddd009b 100644 --- a/arch/x86_64/kernel/x8664_ksyms.c +++ b/arch/x86_64/kernel/x8664_ksyms.c @@ -178,10 +178,6 @@ EXPORT_SYMBOL(rwsem_down_write_failed_thunk); EXPORT_SYMBOL(empty_zero_page); -#ifdef CONFIG_HAVE_DEC_LOCK -EXPORT_SYMBOL(_atomic_dec_and_lock); -#endif - EXPORT_SYMBOL(die_chain); EXPORT_SYMBOL(register_die_notifier); diff --git a/arch/x86_64/lib/Makefile b/arch/x86_64/lib/Makefile index 6b26a1c1e9f..bba5db6cebd 100644 --- a/arch/x86_64/lib/Makefile +++ b/arch/x86_64/lib/Makefile @@ -10,5 +10,3 @@ lib-y := csum-partial.o csum-copy.o csum-wrappers.o delay.o \ usercopy.o getuser.o putuser.o \ thunk.o clear_page.o copy_page.o bitstr.o bitops.o lib-y += memcpy.o memmove.o memset.o copy_user.o - -lib-$(CONFIG_HAVE_DEC_LOCK) += dec_and_lock.o diff --git a/arch/x86_64/lib/dec_and_lock.c b/arch/x86_64/lib/dec_and_lock.c deleted file mode 100644 index ab43394dc77..00000000000 --- a/arch/x86_64/lib/dec_and_lock.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * x86 version of "atomic_dec_and_lock()" using - * the atomic "cmpxchg" instruction. - * - * (For CPU's lacking cmpxchg, we use the slow - * generic version, and this one never even gets - * compiled). - */ - -#include <linux/spinlock.h> -#include <asm/atomic.h> - -int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock) -{ - int counter; - int newcount; - -repeat: - counter = atomic_read(atomic); - newcount = counter-1; - - if (!newcount) - goto slow_path; - - asm volatile("lock; cmpxchgl %1,%2" - :"=a" (newcount) - :"r" (newcount), "m" (atomic->counter), "0" (counter)); - - /* If the above failed, "eax" will have changed */ - if (newcount != counter) - goto repeat; - return 0; - -slow_path: - spin_lock(lock); - if (atomic_dec_and_test(atomic)) - return 1; - spin_unlock(lock); - return 0; -} diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 2b6257bec4c..7e841aa2a4a 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -26,10 +26,6 @@ config RWSEM_XCHGADD_ALGORITHM bool default y -config HAVE_DEC_LOCK - bool - default y - config GENERIC_HARDIRQS bool default y |