diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/mach-ixp4xx/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/mach-ixp4xx/nas100d-power.c | 128 | ||||
-rw-r--r-- | arch/arm/mach-ixp4xx/nas100d-setup.c | 90 |
3 files changed, 87 insertions, 133 deletions
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index 4fc7316191e..a7880aba3fa 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -24,7 +24,7 @@ obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o -obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o +obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o diff --git a/arch/arm/mach-ixp4xx/nas100d-power.c b/arch/arm/mach-ixp4xx/nas100d-power.c deleted file mode 100644 index 4c1c01bb3fe..00000000000 --- a/arch/arm/mach-ixp4xx/nas100d-power.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/nas100d-power.c - * - * NAS 100d Power/Reset driver - * - * Copyright (C) 2005 Tower Technologies - * - * based on nas100d-io.c - * Copyright (C) 2004 Karen Spearel - * - * Author: Alessandro Zummo <a.zummo@towertech.it> - * Maintainers: http://www.nslu2-linux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/module.h> -#include <linux/reboot.h> -#include <linux/jiffies.h> -#include <linux/timer.h> - -#include <asm/gpio.h> -#include <asm/mach-types.h> - -/* This is used to make sure the power-button pusher is serious. The button - * must be held until the value of this counter reaches zero. - */ -static int power_button_countdown; - -/* Must hold the button down for at least this many counts to be processed */ -#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */ - -static void nas100d_power_handler(unsigned long data); -static DEFINE_TIMER(nas100d_power_timer, nas100d_power_handler, 0, 0); - -static void nas100d_power_handler(unsigned long data) -{ - /* This routine is called twice per second to check the - * state of the power button. - */ - - if (gpio_get_value(NAS100D_PB_GPIO)) { - - /* IO Pin is 1 (button pushed) */ - if (power_button_countdown > 0) - power_button_countdown--; - - } else { - - /* Done on button release, to allow for auto-power-on mods. */ - if (power_button_countdown == 0) { - /* Signal init to do the ctrlaltdel action, - * this will bypass init if it hasn't started - * and do a kernel_restart. - */ - ctrl_alt_del(); - - /* Change the state of the power LED to "blink" */ - gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW); - } else { - power_button_countdown = PBUTTON_HOLDDOWN_COUNT; - } - } - - mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500)); -} - -static irqreturn_t nas100d_reset_handler(int irq, void *dev_id) -{ - /* This is the paper-clip reset, it shuts the machine down directly. */ - machine_power_off(); - - return IRQ_HANDLED; -} - -static int __init nas100d_power_init(void) -{ - if (!(machine_is_nas100d())) - return 0; - - set_irq_type(gpio_to_irq(NAS100D_RB_GPIO), IRQT_LOW); - - if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler, - IRQF_DISABLED, "NAS100D reset button", NULL) < 0) { - - printk(KERN_DEBUG "Reset Button IRQ %d not available\n", - gpio_to_irq(NAS100D_RB_GPIO)); - - return -EIO; - } - - /* The power button on the Iomega NAS100d is on GPIO 14, but - * it cannot handle interrupts on that GPIO line. So we'll - * have to poll it with a kernel timer. - */ - - /* Make sure that the power button GPIO is set up as an input */ - gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN); - - /* Set the initial value for the power button IRQ handler */ - power_button_countdown = PBUTTON_HOLDDOWN_COUNT; - - mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500)); - - return 0; -} - -static void __exit nas100d_power_exit(void) -{ - if (!(machine_is_nas100d())) - return; - - del_timer_sync(&nas100d_power_timer); - - free_irq(gpio_to_irq(NAS100D_RB_GPIO), NULL); -} - -module_init(nas100d_power_init); -module_exit(nas100d_power_exit); - -MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); -MODULE_DESCRIPTION("NAS100D Power/Reset driver"); -MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index a432226b205..4cecae84837 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -3,8 +3,14 @@ * * NAS 100d board-setup * - * based ixdp425-setup.c: + * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au> + * + * based on ixdp425-setup.c: * Copyright (C) 2003-2004 MontaVista Software, Inc. + * based on nas100d-power.c: + * Copyright (C) 2005 Tower Technologies + * based on nas100d-io.c + * Copyright (C) 2004 Karen Spearel * * Author: Alessandro Zummo <a.zummo@towertech.it> * Author: Rod Whitby <rod@whitby.id.au> @@ -13,10 +19,13 @@ */ #include <linux/if_ether.h> -#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/jiffies.h> +#include <linux/timer.h> #include <linux/serial.h> #include <linux/serial_8250.h> #include <linux/leds.h> +#include <linux/reboot.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> @@ -24,6 +33,7 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/io.h> +#include <asm/gpio.h> static struct flash_platform_data nas100d_flash_data = { .map_name = "cfi_probe", @@ -168,6 +178,57 @@ static void nas100d_power_off(void) gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH); } +/* This is used to make sure the power-button pusher is serious. The button + * must be held until the value of this counter reaches zero. + */ +static int power_button_countdown; + +/* Must hold the button down for at least this many counts to be processed */ +#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */ + +static void nas100d_power_handler(unsigned long data); +static DEFINE_TIMER(nas100d_power_timer, nas100d_power_handler, 0, 0); + +static void nas100d_power_handler(unsigned long data) +{ + /* This routine is called twice per second to check the + * state of the power button. + */ + + if (gpio_get_value(NAS100D_PB_GPIO)) { + + /* IO Pin is 1 (button pushed) */ + if (power_button_countdown > 0) + power_button_countdown--; + + } else { + + /* Done on button release, to allow for auto-power-on mods. */ + if (power_button_countdown == 0) { + /* Signal init to do the ctrlaltdel action, + * this will bypass init if it hasn't started + * and do a kernel_restart. + */ + ctrl_alt_del(); + + /* Change the state of the power LED to "blink" */ + gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW); + } else { + power_button_countdown = PBUTTON_HOLDDOWN_COUNT; + } + } + + mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500)); +} + +static irqreturn_t nas100d_reset_handler(int irq, void *dev_id) +{ + /* This is the paper-clip reset, it shuts the machine down directly. */ + machine_power_off(); + + return IRQ_HANDLED; +} + static void __init nas100d_init(void) { DECLARE_MAC_BUF(mac_buf); @@ -183,8 +244,6 @@ static void __init nas100d_init(void) nas100d_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; - pm_power_off = nas100d_power_off; - i2c_register_board_info(0, nas100d_i2c_board_info, ARRAY_SIZE(nas100d_i2c_board_info)); @@ -197,6 +256,29 @@ static void __init nas100d_init(void) platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices)); + pm_power_off = nas100d_power_off; + + if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler, + IRQF_DISABLED | IRQF_TRIGGER_LOW, + "NAS100D reset button", NULL) < 0) { + + printk(KERN_DEBUG "Reset Button IRQ %d not available\n", + gpio_to_irq(NAS100D_RB_GPIO)); + } + + /* The power button on the Iomega NAS100d is on GPIO 14, but + * it cannot handle interrupts on that GPIO line. So we'll + * have to poll it with a kernel timer. + */ + + /* Make sure that the power button GPIO is set up as an input */ + gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN); + + /* Set the initial value for the power button IRQ handler */ + power_button_countdown = PBUTTON_HOLDDOWN_COUNT; + + mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500)); + /* * Map in a portion of the flash and read the MAC address. * Since it is stored in BE in the flash itself, we need to |