diff options
Diffstat (limited to 'arch')
59 files changed, 1598 insertions, 890 deletions
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index 53826224148..5fe9588db07 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -120,6 +120,7 @@ void it8152_irq_demux(unsigned int irq, struct irq_desc *desc) time, when they all three were 0. */ bits_pd = __raw_readl(IT8152_INTC_PDCNIRR); bits_lp = __raw_readl(IT8152_INTC_LPCNIRR); + bits_ld = __raw_readl(IT8152_INTC_LDCNIRR); if (!(bits_ld | bits_lp | bits_pd)) return; } @@ -133,14 +134,14 @@ void it8152_irq_demux(unsigned int irq, struct irq_desc *desc) bits_lp &= ((1 << IT8152_LP_IRQ_COUNT) - 1); while (bits_lp) { - i = __ffs(bits_pd); + i = __ffs(bits_lp); it8152_irq(IT8152_LP_IRQ(i)); bits_lp &= ~(1 << i); } bits_ld &= ((1 << IT8152_LD_IRQ_COUNT) - 1); while (bits_ld) { - i = __ffs(bits_pd); + i = __ffs(bits_ld); it8152_irq(IT8152_LD_IRQ(i)); bits_ld &= ~(1 << i); } diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 283e14fff99..7e97b737656 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -336,7 +336,7 @@ CALL(sys_mknodat) /* 325 */ CALL(sys_fchownat) CALL(sys_futimesat) - CALL(sys_fstatat64) + CALL(ABI(sys_fstatat64, sys_oabi_fstatat64)) CALL(sys_unlinkat) CALL(sys_renameat) /* 330 */ CALL(sys_linkat) diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index e8b98046895..96ab5f52949 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -25,6 +25,7 @@ * sys_stat64: * sys_lstat64: * sys_fstat64: + * sys_fstatat64: * * struct stat64 has different sizes and some members are shifted * Compatibility wrappers are needed for them and provided below. @@ -169,6 +170,29 @@ asmlinkage long sys_oabi_fstat64(unsigned long fd, return error; } +asmlinkage long sys_oabi_fstatat64(int dfd, + char __user *filename, + struct oldabi_stat64 __user *statbuf, + int flag) +{ + struct kstat stat; + int error = -EINVAL; + + if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0) + goto out; + + if (flag & AT_SYMLINK_NOFOLLOW) + error = vfs_lstat_fd(dfd, filename, &stat); + else + error = vfs_stat_fd(dfd, filename, &stat); + + if (!error) + error = cp_oldabi_stat64(&stat, statbuf); + +out: + return error; +} + struct oabi_flock64 { short l_type; short l_whence; diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c index e66a07a928c..2687b730e2d 100644 --- a/arch/avr32/kernel/setup.c +++ b/arch/avr32/kernel/setup.c @@ -163,6 +163,7 @@ add_reserved_region(resource_size_t start, resource_size_t end, new->start = start; new->end = end; new->name = name; + new->sibling = next; new->flags = IORESOURCE_MEM; *pprev = new; diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c index cf6f686d9b0..b835c4c0136 100644 --- a/arch/avr32/kernel/traps.c +++ b/arch/avr32/kernel/traps.c @@ -178,6 +178,7 @@ static int do_cop_absent(u32 insn) return 0; } +#ifdef CONFIG_BUG int is_valid_bugaddr(unsigned long pc) { unsigned short opcode; @@ -189,6 +190,7 @@ int is_valid_bugaddr(unsigned long pc) return opcode == AVR32_BUG_OPCODE; } +#endif asmlinkage void do_illegal_opcode(unsigned long ecr, struct pt_regs *regs) { @@ -197,6 +199,7 @@ asmlinkage void do_illegal_opcode(unsigned long ecr, struct pt_regs *regs) void __user *pc; long code; +#ifdef CONFIG_BUG if (!user_mode(regs) && (ecr == ECR_ILLEGAL_OPCODE)) { enum bug_trap_type type; @@ -211,6 +214,7 @@ asmlinkage void do_illegal_opcode(unsigned long ecr, struct pt_regs *regs) die("Kernel BUG", regs, SIGKILL); } } +#endif local_irq_enable(); diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 72097dacabd..1c62381f5c2 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -482,10 +482,13 @@ endif # be 16kb aligned or the handling of the current variable will break. # Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys # -#core-$(CONFIG_SGI_IP28) += arch/mips/sgi-ip22/ arch/mips/arc/arc_con.o +ifdef CONFIG_SGI_IP28 + ifeq ($(call cc-option-yn,-mr10k-cache-barrier=1), n) + $(error gcc doesn't support needed option -mr10k-cache-barrier=1) + endif +endif core-$(CONFIG_SGI_IP28) += arch/mips/sgi-ip22/ cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=1 -Iinclude/asm-mips/mach-ip28 -#cflags-$(CONFIG_SGI_IP28) += -Iinclude/asm-mips/mach-ip28 load-$(CONFIG_SGI_IP28) += 0xa800000020004000 # diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/au1000/common/cputable.c index d8df5fdb045..5c0d35d6e22 100644 --- a/arch/mips/au1000/common/cputable.c +++ b/arch/mips/au1000/common/cputable.c @@ -22,24 +22,24 @@ struct cpu_spec* cur_cpu_spec[NR_CPUS]; /* With some thought, we can probably use the mask to reduce the * size of the table. */ -struct cpu_spec cpu_specs[] = { - { 0xffffffff, 0x00030100, "Au1000 DA", 1, 0 }, - { 0xffffffff, 0x00030201, "Au1000 HA", 1, 0 }, - { 0xffffffff, 0x00030202, "Au1000 HB", 1, 0 }, - { 0xffffffff, 0x00030203, "Au1000 HC", 1, 1 }, - { 0xffffffff, 0x00030204, "Au1000 HD", 1, 1 }, - { 0xffffffff, 0x01030200, "Au1500 AB", 1, 1 }, - { 0xffffffff, 0x01030201, "Au1500 AC", 0, 1 }, - { 0xffffffff, 0x01030202, "Au1500 AD", 0, 1 }, - { 0xffffffff, 0x02030200, "Au1100 AB", 1, 1 }, - { 0xffffffff, 0x02030201, "Au1100 BA", 1, 1 }, - { 0xffffffff, 0x02030202, "Au1100 BC", 1, 1 }, - { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1 }, - { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 }, - { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 }, - { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 }, - { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0 }, - { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 }, +struct cpu_spec cpu_specs[] = { + { 0xffffffff, 0x00030100, "Au1000 DA", 1, 0, 1 }, + { 0xffffffff, 0x00030201, "Au1000 HA", 1, 0, 1 }, + { 0xffffffff, 0x00030202, "Au1000 HB", 1, 0, 1 }, + { 0xffffffff, 0x00030203, "Au1000 HC", 1, 1, 0 }, + { 0xffffffff, 0x00030204, "Au1000 HD", 1, 1, 0 }, + { 0xffffffff, 0x01030200, "Au1500 AB", 1, 1, 0 }, + { 0xffffffff, 0x01030201, "Au1500 AC", 0, 1, 0 }, + { 0xffffffff, 0x01030202, "Au1500 AD", 0, 1, 0 }, + { 0xffffffff, 0x02030200, "Au1100 AB", 1, 1, 0 }, + { 0xffffffff, 0x02030201, "Au1100 BA", 1, 1, 0 }, + { 0xffffffff, 0x02030202, "Au1100 BC", 1, 1, 0 }, + { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1, 0 }, + { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1, 0 }, + { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1, 0 }, + { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0, 0 }, + { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0, 0 }, + { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 } }; void diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index d885e3848ec..9e4ab80caab 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -57,7 +57,7 @@ void __init plat_mem_setup(void) { struct cpu_spec *sp; char *argptr; - unsigned long prid, cpupll, bclk = 1; + unsigned long prid, cpufreq, bclk = 1; set_cpuspec(); sp = cur_cpu_spec[0]; @@ -65,8 +65,15 @@ void __init plat_mem_setup(void) board_setup(); /* board specific setup */ prid = read_c0_prid(); - cpupll = (au_readl(0xB1900060) & 0x3F) * 12; - printk("(PRId %08lx) @ %ldMHZ\n", prid, cpupll); + if (sp->cpu_pll_wo) +#ifdef CONFIG_SOC_AU1000_FREQUENCY + cpufreq = CONFIG_SOC_AU1000_FREQUENCY / 1000000; +#else + cpufreq = 396; +#endif + else + cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12; + printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq); bclk = sp->cpu_bclk; if (bclk) diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c index f113b512d7b..e122bbc6cd8 100644 --- a/arch/mips/au1000/common/time.c +++ b/arch/mips/au1000/common/time.c @@ -209,18 +209,22 @@ unsigned long cal_r4koff(void) while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S); au_writel(0, SYS_TOYWRITE); while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S); + } else + no_au1xxx_32khz = 1; - cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * - AU1000_SRC_CLK; - } - else { - /* The 32KHz oscillator isn't running, so assume there - * isn't one and grab the processor speed from the PLL. - * NOTE: some old silicon doesn't allow reading the PLL. - */ + /* + * On early Au1000, sys_cpupll was write-only. Since these + * silicon versions of Au1000 are not sold by AMD, we don't bend + * over backwards trying to determine the frequency. + */ + if (cur_cpu_spec[0]->cpu_pll_wo) +#ifdef CONFIG_SOC_AU1000_FREQUENCY + cpu_speed = CONFIG_SOC_AU1000_FREQUENCY; +#else + cpu_speed = 396000000; +#endif + else cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK; - no_au1xxx_32khz = 1; - } mips_hpt_frequency = cpu_speed; // Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16)); diff --git a/arch/mips/au1000/xxs1500/board_setup.c b/arch/mips/au1000/xxs1500/board_setup.c index a9237f41933..b2e413e597a 100644 --- a/arch/mips/au1000/xxs1500/board_setup.c +++ b/arch/mips/au1000/xxs1500/board_setup.c @@ -33,11 +33,10 @@ #include <asm/cpu.h> #include <asm/bootinfo.h> #include <asm/irq.h> -#include <asm/keyboard.h> #include <asm/mipsregs.h> #include <asm/reboot.h> #include <asm/pgtable.h> -#include <asm/au1000.h> +#include <asm/mach-au1x00/au1000.h> void board_reset(void) { diff --git a/arch/mips/au1000/xxs1500/irqmap.c b/arch/mips/au1000/xxs1500/irqmap.c index 389349295d7..a343da13433 100644 --- a/arch/mips/au1000/xxs1500/irqmap.c +++ b/arch/mips/au1000/xxs1500/irqmap.c @@ -45,7 +45,7 @@ #include <asm/io.h> #include <asm/mipsregs.h> #include <asm/system.h> -#include <asm/au1000.h> +#include <asm/mach-au1x00/au1000.h> struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0}, diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index abf70d74e9d..3b42cea2e40 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -1,58 +1,48 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:22 2007 +# Linux kernel version: 2.6.25-rc7 +# Mon Mar 31 08:11:19 2008 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set -CONFIG_SIBYTE_BIGSUR=y -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +CONFIG_SIBYTE_BIGSUR=y # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_WR_PPMC is not set CONFIG_SIBYTE_BCM1x80=y CONFIG_SIBYTE_SB1xxx_SOC=y # CONFIG_CPU_SB1_PASS_1 is not set @@ -68,9 +58,11 @@ CONFIG_SIBYTE_CFE=y # CONFIG_SIBYTE_CFE_CONSOLE is not set # CONFIG_SIBYTE_BUS_WATCHER is not set # CONFIG_SIBYTE_TBPROF is not set +CONFIG_SIBYTE_HAS_ZBUS_PROFILING=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -81,11 +73,17 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_CEVT_BCM1480=y CONFIG_CSRC_BCM1480=y +CONFIG_CFE=y CONFIG_DMA_COHERENT=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y CONFIG_SWAP_IO_SPACE=y CONFIG_BOOT_ELF32=y CONFIG_MIPS_L1_CACHE_SHIFT=5 @@ -93,10 +91,6 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set @@ -137,14 +131,15 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_IRQ_PER_CPU=y CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_SYS_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -152,13 +147,19 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y CONFIG_SMP=y CONFIG_SYS_SUPPORTS_SMP=y CONFIG_NR_CPUS_DEFAULT_4=y CONFIG_NR_CPUS=4 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -171,38 +172,45 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set # CONFIG_KEXEC is not set +CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y -# CONFIG_CPUSETS is not set +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -211,24 +219,33 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set @@ -236,12 +253,10 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +CONFIG_BLOCK_COMPAT=y # # IO Schedulers @@ -255,6 +270,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) @@ -262,23 +278,19 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_HW_HAS_PCI=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_PCI_DEBUG=y CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# - -# -# PCI Hotplug Support -# +CONFIG_ZONE_DMA32=y +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y @@ -292,7 +304,6 @@ CONFIG_BINFMT_ELF32=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set # # Networking @@ -302,7 +313,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -310,10 +320,11 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set +CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y @@ -322,41 +333,141 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set +CONFIG_IP_VS=m +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m +CONFIG_IPV6=m +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y CONFIG_NETWORK_SECMARK=y -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_ADVANCED is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_STATE=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -369,10 +480,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -380,9 +487,21 @@ CONFIG_NETWORK_SECMARK=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -391,85 +510,70 @@ CONFIG_NETWORK_SECMARK=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_SGI_IOC4=m # CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y CONFIG_BLK_DEV_IDETAPE=y CONFIG_BLK_DEV_IDEFLOPPY=y +# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set +CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_PCI_AUTO is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set @@ -495,87 +599,196 @@ CONFIG_BLK_DEV_IT8213=m # CONFIG_BLK_DEV_VIA82CXXX is not set CONFIG_BLK_DEV_TC86C001=m # CONFIG_BLK_DEV_IDE_SWARM is not set -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_IDEDMA_AUTO is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +CONFIG_SATA_SIL24=y +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +CONFIG_PATA_SIL680=y +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_DM9000 is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -585,52 +798,53 @@ CONFIG_SB1250_MAC=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3=m +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +CONFIG_PPPOL2TP=m +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +# CONFIG_NET_FC is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -660,17 +874,16 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_DIGIEPCA is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set -CONFIG_MOXA_SMARTIO_NEW=m # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set # CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set # CONFIG_RIO is not set # CONFIG_STALDRV is not set -CONFIG_SERIAL_SB1250_DUART=y -CONFIG_SERIAL_SB1250_DUART_CONSOLE=y +# CONFIG_NOZOMI is not set # # Serial drivers @@ -680,39 +893,24 @@ CONFIG_SERIAL_SB1250_DUART_CONSOLE=y # # Non-8250 serial port support # +CONFIG_SERIAL_SB1250_DUART=y +CONFIG_SERIAL_SB1250_DUART_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # @@ -736,29 +934,30 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PASEMI is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set CONFIG_I2C_SIBYTE=y +# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support # -CONFIG_SENSORS_DS1337=y -CONFIG_SENSORS_DS1374=y +# CONFIG_DS1682 is not set CONFIG_SENSORS_EEPROM=y CONFIG_SENSORS_PCF8574=y -CONFIG_SENSORS_PCA9539=y +# CONFIG_PCF8575 is not set CONFIG_SENSORS_PCF8591=y +# CONFIG_TPS65010 is not set CONFIG_SENSORS_MAX6875=y +# CONFIG_SENSORS_TSL2550 is not set CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y CONFIG_I2C_DEBUG_BUS=y @@ -769,43 +968,49 @@ CONFIG_I2C_DEBUG_CHIP=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set # -# Dallas's 1-wire bus +# Sonics Silicon Backplane # -# CONFIG_W1 is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # -# CONFIG_SOUND is not set +# CONFIG_DISPLAY_SUPPORT is not set # -# USB support +# Sound # +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y @@ -814,104 +1019,73 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization +# Userspace I/O # +# CONFIG_UIO is not set # # File systems # -CONFIG_EXT2_FS=y +CONFIG_EXT2_FS=m CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=m +CONFIG_QUOTACTL=y +CONFIG_AUTOFS_FS=m +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems # -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y # # Pseudo filesystems @@ -923,7 +1097,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y CONFIG_CONFIGFS_FS=m # @@ -939,14 +1112,13 @@ CONFIG_CONFIGFS_FS=m # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -958,6 +1130,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -965,37 +1138,61 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Distributed Lock Manager -# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set # CONFIG_DLM_DEBUG is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set @@ -1003,8 +1200,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_LOG_BUF_SHIFT=16 CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set @@ -1014,15 +1211,19 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set -CONFIG_CROSSCOMPILE=y +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_CMDLINE="" # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_SB1XXX_CORELIS is not set @@ -1034,23 +1235,22 @@ CONFIG_CMDLINE="" CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_SEQIV=m CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_MD4=y +CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_GF128MUL=m @@ -1058,39 +1258,50 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CCM=m +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=y -CONFIG_CRYPTO_TWOFISH=y -CONFIG_CRYPTO_TWOFISH_COMMON=y -CONFIG_CRYPTO_SERPENT=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_TEA=m -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_MICHAEL_MIC=y +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m # CONFIG_CRYPTO_CRC32C is not set CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set +CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c index fc4aa07b6d3..38fa1a194bf 100644 --- a/arch/mips/kernel/i8253.c +++ b/arch/mips/kernel/i8253.c @@ -15,6 +15,7 @@ #include <asm/time.h> DEFINE_SPINLOCK(i8253_lock); +EXPORT_SYMBOL(i8253_lock); /* * Initialize the PIT timer. diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 9f85d4cecc5..b45a7093ca2 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -157,6 +157,6 @@ void __init time_init(void) { plat_time_init(); - if (mips_clockevent_init() || !cpu_has_mfc0_count_bug()) + if (!mips_clockevent_init() || !cpu_has_mfc0_count_bug()) init_mips_clocksource(); } diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index eed2dc4273e..39804c584ed 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -262,13 +262,21 @@ void dump_mtregs(void) /* Find some VPE program space */ static void *alloc_progmem(unsigned long len) { + void *addr; + #ifdef CONFIG_MIPS_VPE_LOADER_TOM - /* this means you must tell linux to use less memory than you physically have */ - return pfn_to_kaddr(max_pfn); + /* + * This means you must tell Linux to use less memory than you + * physically have, for example by passing a mem= boot argument. + */ + addr = pfn_to_kaddr(max_pfn); + memset(addr, 0, len); #else - // simple grab some mem for now - return kmalloc(len, GFP_KERNEL); + /* simple grab some mem for now */ + addr = kzalloc(len, GFP_KERNEL); #endif + + return addr; } static void release_progmem(void *ptr) @@ -884,9 +892,10 @@ static int vpe_elfload(struct vpe * v) } v->load_addr = alloc_progmem(mod.core_size); - memset(v->load_addr, 0, mod.core_size); + if (!v->load_addr) + return -ENOMEM; - printk("VPE loader: loading to %p\n", v->load_addr); + pr_info("VPE loader: loading to %p\n", v->load_addr); if (relocate) { for (i = 0; i < hdr->e_shnum; i++) { diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 3a93d4ce270..382738ca8a0 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -307,6 +307,7 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, case CPU_R12000: case CPU_R14000: case CPU_4KC: + case CPU_4KEC: case CPU_SB1: case CPU_SB1A: case CPU_4KSC: diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c index ab68c4318a3..87e2c8f54e2 100644 --- a/arch/mips/pci/pci-bcm1480.c +++ b/arch/mips/pci/pci-bcm1480.c @@ -185,8 +185,8 @@ static struct resource bcm1480_mem_resource = { static struct resource bcm1480_io_resource = { .name = "BCM1480 PCI I/O", - .start = 0x2c000000UL, - .end = 0x2dffffffUL, + .start = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, + .end = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES + 0x1ffffffUL, .flags = IORESOURCE_IO, }; @@ -194,6 +194,7 @@ struct pci_controller bcm1480_controller = { .pci_ops = &bcm1480_pci_ops, .mem_resource = &bcm1480_mem_resource, .io_resource = &bcm1480_io_resource, + .io_offset = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, }; @@ -251,6 +252,7 @@ static int __init bcm1480_pcibios_init(void) bcm1480_controller.io_map_base = (unsigned long) ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536); + bcm1480_controller.io_map_base -= bcm1480_controller.io_offset; set_io_port_base(bcm1480_controller.io_map_base); isa_slot_offset = (unsigned long) ioremap(A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, 1024*1024); diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c index 005e7fecab0..f54f45412b0 100644 --- a/arch/mips/pci/pci-bcm1480ht.c +++ b/arch/mips/pci/pci-bcm1480ht.c @@ -180,8 +180,8 @@ static struct resource bcm1480ht_mem_resource = { static struct resource bcm1480ht_io_resource = { .name = "BCM1480 HT I/O", - .start = 0x00000000UL, - .end = 0x01ffffffUL, + .start = A_BCM1480_PHYS_HT_IO_MATCH_BYTES, + .end = A_BCM1480_PHYS_HT_IO_MATCH_BYTES + 0x01ffffffUL, .flags = IORESOURCE_IO, }; @@ -191,29 +191,22 @@ struct pci_controller bcm1480ht_controller = { .io_resource = &bcm1480ht_io_resource, .index = 1, .get_busno = bcm1480ht_pcibios_get_busno, + .io_offset = A_BCM1480_PHYS_HT_IO_MATCH_BYTES, }; static int __init bcm1480ht_pcibios_init(void) { - uint32_t cmdreg; - ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024); - /* - * See if the PCI bus has been configured by the firmware. - */ - cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), - PCI_COMMAND)); - if (!(cmdreg & PCI_COMMAND_MASTER)) { - printk("HT: Skipping HT probe. Bus is not initialized.\n"); - iounmap(ht_cfg_space); - return 1; /* XXX */ - } + /* CFE doesn't always init all HT paths, so we always scan */ bcm1480ht_bus_status |= PCI_BUS_ENABLED; ht_eoi_space = (unsigned long) ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES, 4 * 1024 * 1024); + bcm1480ht_controller.io_map_base = (unsigned long) + ioremap(A_BCM1480_PHYS_HT_IO_MATCH_BYTES, 65536); + bcm1480ht_controller.io_map_base -= bcm1480ht_controller.io_offset; register_pci_controller(&bcm1480ht_controller); diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig index 797f0dfebde..09f306248f2 100644 --- a/arch/powerpc/configs/pasemi_defconfig +++ b/arch/powerpc/configs/pasemi_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Tue Jan 15 10:26:10 2008 +# Linux kernel version: 2.6.25-rc6 +# Tue Mar 25 10:25:48 2008 # CONFIG_PPC64=y @@ -27,6 +27,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -91,11 +94,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -103,6 +108,15 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -130,6 +144,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -140,8 +155,8 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_86xx is not set # CONFIG_PPC_PSERIES is not set # CONFIG_PPC_ISERIES is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set CONFIG_PPC_PASEMI=y @@ -159,6 +174,7 @@ CONFIG_PPC_PASEMI_MDIO=y # CONFIG_PPC_IBM_CELL_BLADE is not set # CONFIG_PQ2ADS is not set CONFIG_PPC_NATIVE=y +# CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -189,7 +205,6 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y # CPU Frequency drivers # CONFIG_PPC_PASEMI_CPUFREQ=y -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -204,16 +219,20 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_FORCE_MAX_ZONEORDER=9 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_IOMMU_VMERGE=y +CONFIG_IOMMU_HELPER=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set # CONFIG_IRQ_ALL_CPUS is not set @@ -236,12 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_PPC_HAS_HASH_64K=y CONFIG_PPC_64K_PAGES=y +# CONFIG_PPC_SUBPAGE_PROT is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set # CONFIG_SECCOMP is not set -# CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y # @@ -290,6 +309,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -346,6 +366,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -441,8 +462,10 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_CAFE is not set +CONFIG_MTD_NAND_PASEMI=y # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_NAND_FSL_ELBC is not set # CONFIG_MTD_ONENAND is not set # @@ -465,7 +488,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -473,11 +496,13 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y @@ -485,6 +510,7 @@ CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_BLK_DEV_IDECS is not set # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=y @@ -500,7 +526,6 @@ CONFIG_IDE_PROC_FS=y # # PCI IDE chipsets support # -# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_AEC62XX is not set @@ -528,7 +553,6 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set @@ -593,6 +617,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -646,6 +671,7 @@ CONFIG_ATA_GENERIC=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -699,7 +725,6 @@ CONFIG_DUMMY=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -715,6 +740,7 @@ CONFIG_MARVELL_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -742,6 +768,7 @@ CONFIG_NET_PCI=y # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -754,6 +781,9 @@ CONFIG_E1000=y CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -779,6 +809,7 @@ CONFIG_NETDEV_10000=y CONFIG_PASEMI_MAC=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -802,7 +833,6 @@ CONFIG_PASEMI_MAC=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -861,6 +891,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -886,8 +917,7 @@ CONFIG_LEGACY_PTY_COUNT=4 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_PASEMI=y -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -897,6 +927,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # CONFIG_HANGCHECK_TIMER is not set @@ -944,13 +975,12 @@ CONFIG_I2C_PASEMI=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -975,6 +1005,7 @@ CONFIG_HWMON_VID=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1004,6 +1035,7 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set @@ -1013,9 +1045,11 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -1183,6 +1217,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set @@ -1208,6 +1243,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set @@ -1225,6 +1261,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set @@ -1259,6 +1296,10 @@ CONFIG_SND_USB_USX2Y=y # # +# ALSA SoC audio for Freescale SOCs +# + +# # Open Sound System # # CONFIG_SOUND_PRIME is not set @@ -1280,6 +1321,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1293,17 +1335,14 @@ CONFIG_USB_DEVICEFS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y -CONFIG_USB_OHCI_HCD_PPC_OF_BE=y -# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set -CONFIG_USB_OHCI_HCD_PCI=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +# CONFIG_USB_OHCI_HCD_PPC_OF is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y CONFIG_USB_SL811_HCD=y @@ -1348,10 +1387,6 @@ CONFIG_USB_LIBUSUAL=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1377,16 +1412,9 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set CONFIG_EDAC=y @@ -1425,6 +1453,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers @@ -1434,9 +1463,10 @@ CONFIG_RTC_DRV_DS1307=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -1444,6 +1474,7 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -1471,12 +1502,10 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1536,8 +1565,10 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1629,7 +1660,6 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1647,11 +1677,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -# CONFIG_KPROBES is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1670,6 +1695,7 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1682,9 +1708,9 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -# CONFIG_FORCED_INLINING is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -1710,7 +1736,9 @@ CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y @@ -1729,6 +1757,9 @@ CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1743,11 +1774,14 @@ CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 59311ec0d42..4ec60552150 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -241,8 +241,12 @@ void discard_lazy_cpu_state(void) } #endif /* CONFIG_SMP */ +static DEFINE_PER_CPU(unsigned long, current_dabr); + int set_dabr(unsigned long dabr) { + __get_cpu_var(current_dabr) = dabr; + #ifdef CONFIG_PPC_MERGE /* XXX for now */ if (ppc_md.set_dabr) return ppc_md.set_dabr(dabr); @@ -259,8 +263,6 @@ int set_dabr(unsigned long dabr) DEFINE_PER_CPU(struct cpu_usage, cpu_usage_array); #endif -static DEFINE_PER_CPU(unsigned long, current_dabr); - struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *new) { @@ -325,10 +327,8 @@ struct task_struct *__switch_to(struct task_struct *prev, #endif /* CONFIG_SMP */ - if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) { + if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) set_dabr(new->thread.dabr); - __get_cpu_var(current_dabr) = new->thread.dabr; - } new_thread = &new->thread; old_thread = ¤t->thread; diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c index 76ec1d16aef..9a932177e70 100644 --- a/arch/powerpc/oprofile/cell/vma_map.c +++ b/arch/powerpc/oprofile/cell/vma_map.c @@ -92,7 +92,7 @@ vma_map_add(struct vma_to_fileoffset_map *map, unsigned int vma, * A pointer to the first vma_map in the generated list * of vma_maps is returned. */ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, - unsigned long spu_elf_start) + unsigned long __spu_elf_start) { static const unsigned char expected[EI_PAD] = { [EI_MAG0] = ELFMAG0, @@ -107,9 +107,11 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, int grd_val; struct vma_to_fileoffset_map *map = NULL; + void __user *spu_elf_start = (void __user *)__spu_elf_start; struct spu_overlay_info ovly; unsigned int overlay_tbl_offset = -1; - unsigned long phdr_start, shdr_start; + Elf32_Phdr __user *phdr_start; + Elf32_Shdr __user *shdr_start; Elf32_Ehdr ehdr; Elf32_Phdr phdr; Elf32_Shdr shdr, shdr_str; @@ -121,12 +123,12 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, unsigned int ovly_buf_table_sym = 0; unsigned int ovly_table_end_sym = 0; unsigned int ovly_buf_table_end_sym = 0; - unsigned long ovly_table; + struct spu_overlay_info __user *ovly_table; unsigned int n_ovlys; /* Get and validate ELF header. */ - if (copy_from_user(&ehdr, (void *) spu_elf_start, sizeof (ehdr))) + if (copy_from_user(&ehdr, spu_elf_start, sizeof (ehdr))) goto fail; if (memcmp(ehdr.e_ident, expected, EI_PAD) != 0) { @@ -152,9 +154,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, /* Traverse program headers. */ for (i = 0; i < ehdr.e_phnum; i++) { - if (copy_from_user(&phdr, - (void *) (phdr_start + i * sizeof(phdr)), - sizeof(phdr))) + if (copy_from_user(&phdr, phdr_start + i, sizeof(phdr))) goto fail; if (phdr.p_type != PT_LOAD) @@ -171,9 +171,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, pr_debug("SPU_PROF: Created non-overlay maps\n"); /* Traverse section table and search for overlay-related symbols. */ for (i = 0; i < ehdr.e_shnum; i++) { - if (copy_from_user(&shdr, - (void *) (shdr_start + i * sizeof(shdr)), - sizeof(shdr))) + if (copy_from_user(&shdr, shdr_start + i, sizeof(shdr))) goto fail; if (shdr.sh_type != SHT_SYMTAB) @@ -182,8 +180,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, continue; if (copy_from_user(&shdr_str, - (void *) (shdr_start + shdr.sh_link * - sizeof(shdr)), + shdr_start + shdr.sh_link, sizeof(shdr))) goto fail; @@ -191,15 +188,15 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, goto fail;; for (j = 0; j < shdr.sh_size / sizeof (sym); j++) { - if (copy_from_user(&sym, (void *) (spu_elf_start + - shdr.sh_offset + j * - sizeof (sym)), + if (copy_from_user(&sym, spu_elf_start + + shdr.sh_offset + + j * sizeof (sym), sizeof (sym))) goto fail; - if (copy_from_user(name, (void *) - (spu_elf_start + shdr_str.sh_offset + - sym.st_name), + if (copy_from_user(name, + spu_elf_start + shdr_str.sh_offset + + sym.st_name, 20)) goto fail; @@ -245,9 +242,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, /* Traverse overlay table. */ for (i = 0; i < n_ovlys; i++) { - if (copy_from_user(&ovly, (void *) - (ovly_table + i * sizeof (ovly)), - sizeof (ovly))) + if (copy_from_user(&ovly, ovly_table + i, sizeof (ovly))) goto fail; /* The ovly.vma/size/offset arguments are analogous to the same diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index ca52b587166..a977f200db8 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -763,7 +763,7 @@ void xics_request_IPIs(void) } #endif /* CONFIG_SMP */ -void xics_teardown_cpu() +void xics_teardown_cpu(void) { int cpu = smp_processor_id(); diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig index 250958d1e3c..9d4bd222949 100644 --- a/arch/sparc64/defconfig +++ b/arch/sparc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc1 -# Sun Feb 17 22:44:12 2008 +# Linux kernel version: 2.6.25-rc3 +# Wed Mar 26 04:33:35 2008 # CONFIG_SPARC=y CONFIG_SPARC64=y @@ -55,9 +55,11 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=18 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_RT_GROUP_SCHED=y +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -482,6 +484,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -810,6 +813,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set diff --git a/arch/sparc64/kernel/cpu.c b/arch/sparc64/kernel/cpu.c index dd5d28e3d79..0097c08dc60 100644 --- a/arch/sparc64/kernel/cpu.c +++ b/arch/sparc64/kernel/cpu.c @@ -15,6 +15,8 @@ #include <asm/spitfire.h> #include <asm/oplib.h> +#include "entry.h" + DEFINE_PER_CPU(cpuinfo_sparc, __cpu_data) = { 0 }; struct cpu_iu_info { @@ -65,8 +67,6 @@ static struct cpu_iu_info linux_sparc_chips[] = { char *sparc_cpu_type; char *sparc_fpu_type; -unsigned int fsr_storage; - static void __init sun4v_cpu_probe(void) { switch (sun4v_chip_type) { @@ -94,8 +94,10 @@ void __init cpu_probe(void) unsigned long ver, fpu_vers, manuf, impl, fprs; int i; - if (tlb_type == hypervisor) - return sun4v_cpu_probe(); + if (tlb_type == hypervisor) { + sun4v_cpu_probe(); + return; + } fprs = fprs_read(); fprs_write(FPRS_FEF); diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index 6be4d2d2904..49eca4b1cf2 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -1705,6 +1705,36 @@ __flushw_user: 2: retl nop + /* Flush %fp and %i7 to the stack for all register + * windows active inside of the cpu. This allows + * show_stack_trace() to avoid using an expensive + * 'flushw'. + */ + .globl stack_trace_flush + .type stack_trace_flush,#function +stack_trace_flush: + rdpr %pstate, %o0 + wrpr %o0, PSTATE_IE, %pstate + + rdpr %cwp, %g1 + rdpr %canrestore, %g2 + sub %g1, 1, %g3 + +1: brz,pn %g2, 2f + sub %g2, 1, %g2 + wrpr %g3, %cwp + stx %fp, [%sp + STACK_BIAS + RW_V9_I6] + stx %i7, [%sp + STACK_BIAS + RW_V9_I7] + ba,pt %xcc, 1b + sub %g3, 1, %g3 + +2: wrpr %g1, %cwp + wrpr %o0, %pstate + + retl + nop + .size stack_trace_flush,.-stack_trace_flush + #ifdef CONFIG_SMP .globl hard_smp_processor_id hard_smp_processor_id: diff --git a/arch/sparc64/kernel/entry.h b/arch/sparc64/kernel/entry.h new file mode 100644 index 00000000000..4a91e9c6d31 --- /dev/null +++ b/arch/sparc64/kernel/entry.h @@ -0,0 +1,196 @@ +#ifndef _ENTRY_H +#define _ENTRY_H + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> + +extern char *sparc_cpu_type; +extern char *sparc_fpu_type; + +extern void __init per_cpu_patch(void); +extern void __init sun4v_patch(void); +extern void __init boot_cpu_id_too_large(int cpu); +extern unsigned int dcache_parity_tl1_occurred; +extern unsigned int icache_parity_tl1_occurred; + +extern asmlinkage void update_perfctrs(void); +extern asmlinkage void sparc_breakpoint(struct pt_regs *regs); +extern void timer_interrupt(int irq, struct pt_regs *regs); + +extern void do_notify_resume(struct pt_regs *regs, + unsigned long orig_i0, + int restart_syscall, + unsigned long thread_info_flags); + +extern asmlinkage void syscall_trace(struct pt_regs *regs, + int syscall_exit_p); + +extern void bad_trap_tl1(struct pt_regs *regs, long lvl); + +extern void do_fpe_common(struct pt_regs *regs); +extern void do_fpieee(struct pt_regs *regs); +extern void do_fpother(struct pt_regs *regs); +extern void do_tof(struct pt_regs *regs); +extern void do_div0(struct pt_regs *regs); +extern void do_illegal_instruction(struct pt_regs *regs); +extern void mem_address_unaligned(struct pt_regs *regs, + unsigned long sfar, + unsigned long sfsr); +extern void sun4v_do_mna(struct pt_regs *regs, + unsigned long addr, + unsigned long type_ctx); +extern void do_privop(struct pt_regs *regs); +extern void do_privact(struct pt_regs *regs); +extern void do_cee(struct pt_regs *regs); +extern void do_cee_tl1(struct pt_regs *regs); +extern void do_dae_tl1(struct pt_regs *regs); +extern void do_iae_tl1(struct pt_regs *regs); +extern void do_div0_tl1(struct pt_regs *regs); +extern void do_fpdis_tl1(struct pt_regs *regs); +extern void do_fpieee_tl1(struct pt_regs *regs); +extern void do_fpother_tl1(struct pt_regs *regs); +extern void do_ill_tl1(struct pt_regs *regs); +extern void do_irq_tl1(struct pt_regs *regs); +extern void do_lddfmna_tl1(struct pt_regs *regs); +extern void do_stdfmna_tl1(struct pt_regs *regs); +extern void do_paw(struct pt_regs *regs); +extern void do_paw_tl1(struct pt_regs *regs); +extern void do_vaw(struct pt_regs *regs); +extern void do_vaw_tl1(struct pt_regs *regs); +extern void do_tof_tl1(struct pt_regs *regs); +extern void do_getpsr(struct pt_regs *regs); + +extern void spitfire_insn_access_exception(struct pt_regs *regs, + unsigned long sfsr, + unsigned long sfar); +extern void spitfire_insn_access_exception_tl1(struct pt_regs *regs, + unsigned long sfsr, + unsigned long sfar); +extern void spitfire_data_access_exception(struct pt_regs *regs, + unsigned long sfsr, + unsigned long sfar); +extern void spitfire_data_access_exception_tl1(struct pt_regs *regs, + unsigned long sfsr, + unsigned long sfar); +extern void spitfire_access_error(struct pt_regs *regs, + unsigned long status_encoded, + unsigned long afar); + +extern void cheetah_fecc_handler(struct pt_regs *regs, + unsigned long afsr, + unsigned long afar); +extern void cheetah_cee_handler(struct pt_regs *regs, + unsigned long afsr, + unsigned long afar); +extern void cheetah_deferred_handler(struct pt_regs *regs, + unsigned long afsr, + unsigned long afar); +extern void cheetah_plus_parity_error(int type, struct pt_regs *regs); + +extern void sun4v_insn_access_exception(struct pt_regs *regs, + unsigned long addr, + unsigned long type_ctx); +extern void sun4v_insn_access_exception_tl1(struct pt_regs *regs, + unsigned long addr, + unsigned long type_ctx); +extern void sun4v_data_access_exception(struct pt_regs *regs, + unsigned long addr, + unsigned long type_ctx); +extern void sun4v_data_access_exception_tl1(struct pt_regs *regs, + unsigned long addr, + unsigned long type_ctx); +extern void sun4v_resum_error(struct pt_regs *regs, + unsigned long offset); +extern void sun4v_resum_overflow(struct pt_regs *regs); +extern void sun4v_nonresum_error(struct pt_regs *regs, + unsigned long offset); +extern void sun4v_nonresum_overflow(struct pt_regs *regs); + +extern unsigned long sun4v_err_itlb_vaddr; +extern unsigned long sun4v_err_itlb_ctx; +extern unsigned long sun4v_err_itlb_pte; +extern unsigned long sun4v_err_itlb_error; + +extern void sun4v_itlb_error_report(struct pt_regs *regs, int tl); + +extern unsigned long sun4v_err_dtlb_vaddr; +extern unsigned long sun4v_err_dtlb_ctx; +extern unsigned long sun4v_err_dtlb_pte; +extern unsigned long sun4v_err_dtlb_error; + +extern void sun4v_dtlb_error_report(struct pt_regs *regs, int tl); +extern void hypervisor_tlbop_error(unsigned long err, + unsigned long op); +extern void hypervisor_tlbop_error_xcall(unsigned long err, + unsigned long op); + +/* WARNING: The error trap handlers in assembly know the precise + * layout of the following structure. + * + * C-level handlers in traps.c use this information to log the + * error and then determine how to recover (if possible). + */ +struct cheetah_err_info { +/*0x00*/u64 afsr; +/*0x08*/u64 afar; + + /* D-cache state */ +/*0x10*/u64 dcache_data[4]; /* The actual data */ +/*0x30*/u64 dcache_index; /* D-cache index */ +/*0x38*/u64 dcache_tag; /* D-cache tag/valid */ +/*0x40*/u64 dcache_utag; /* D-cache microtag */ +/*0x48*/u64 dcache_stag; /* D-cache snooptag */ + + /* I-cache state */ +/*0x50*/u64 icache_data[8]; /* The actual insns + predecode */ +/*0x90*/u64 icache_index; /* I-cache index */ +/*0x98*/u64 icache_tag; /* I-cache phys tag */ +/*0xa0*/u64 icache_utag; /* I-cache microtag */ +/*0xa8*/u64 icache_stag; /* I-cache snooptag */ +/*0xb0*/u64 icache_upper; /* I-cache upper-tag */ +/*0xb8*/u64 icache_lower; /* I-cache lower-tag */ + + /* E-cache state */ +/*0xc0*/u64 ecache_data[4]; /* 32 bytes from staging registers */ +/*0xe0*/u64 ecache_index; /* E-cache index */ +/*0xe8*/u64 ecache_tag; /* E-cache tag/state */ + +/*0xf0*/u64 __pad[32 - 30]; +}; +#define CHAFSR_INVALID ((u64)-1L) + +/* This is allocated at boot time based upon the largest hardware + * cpu ID in the system. We allocate two entries per cpu, one for + * TL==0 logging and one for TL >= 1 logging. + */ +extern struct cheetah_err_info *cheetah_error_log; + +/* UPA nodes send interrupt packet to UltraSparc with first data reg + * value low 5 (7 on Starfire) bits holding the IRQ identifier being + * delivered. We must translate this into a non-vector IRQ so we can + * set the softint on this cpu. + * + * To make processing these packets efficient and race free we use + * an array of irq buckets below. The interrupt vector handler in + * entry.S feeds incoming packets into per-cpu pil-indexed lists. + * + * If you make changes to ino_bucket, please update hand coded assembler + * of the vectored interrupt trap handler(s) in entry.S and sun4v_ivec.S + */ +struct ino_bucket { +/*0x00*/unsigned long __irq_chain_pa; + + /* Virtual interrupt number assigned to this INO. */ +/*0x08*/unsigned int __virt_irq; +/*0x0c*/unsigned int __pad; +}; + +extern struct ino_bucket *ivector_table; +extern unsigned long ivector_table_pa; + +extern void handler_irq(int irq, struct pt_regs *regs); +extern void init_irqwork_curcpu(void); +extern void __cpuinit sun4v_register_mondo_queues(int this_cpu); + +#endif /* _ENTRY_H */ diff --git a/arch/sparc64/kernel/iommu.c b/arch/sparc64/kernel/iommu.c index fbaab3497bf..b781d3d54fb 100644 --- a/arch/sparc64/kernel/iommu.c +++ b/arch/sparc64/kernel/iommu.c @@ -626,7 +626,7 @@ static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist, iommu_map_failed: for_each_sg(sglist, s, nelems, i) { if (s->dma_length != 0) { - unsigned long vaddr, npages, entry, i; + unsigned long vaddr, npages, entry, j; iopte_t *base; vaddr = s->dma_address & IO_PAGE_MASK; @@ -637,8 +637,8 @@ iommu_map_failed: >> IO_PAGE_SHIFT; base = iommu->page_table + entry; - for (i = 0; i < npages; i++) - iopte_make_dummy(iommu, base + i); + for (j = 0; j < npages; j++) + iopte_make_dummy(iommu, base + j); s->dma_address = DMA_ERROR_CODE; s->dma_length = 0; @@ -803,7 +803,7 @@ static void dma_4u_sync_sg_for_cpu(struct device *dev, spin_unlock_irqrestore(&iommu->lock, flags); } -const struct dma_ops sun4u_dma_ops = { +static const struct dma_ops sun4u_dma_ops = { .alloc_coherent = dma_4u_alloc_coherent, .free_coherent = dma_4u_free_coherent, .map_single = dma_4u_map_single, diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 5ec06c8c7fe..eb88bd6e674 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -44,27 +44,10 @@ #include <asm/hypervisor.h> #include <asm/cacheflush.h> -/* UPA nodes send interrupt packet to UltraSparc with first data reg - * value low 5 (7 on Starfire) bits holding the IRQ identifier being - * delivered. We must translate this into a non-vector IRQ so we can - * set the softint on this cpu. - * - * To make processing these packets efficient and race free we use - * an array of irq buckets below. The interrupt vector handler in - * entry.S feeds incoming packets into per-cpu pil-indexed lists. - * - * If you make changes to ino_bucket, please update hand coded assembler - * of the vectored interrupt trap handler(s) in entry.S and sun4v_ivec.S - */ -struct ino_bucket { -/*0x00*/unsigned long __irq_chain_pa; - - /* Virtual interrupt number assigned to this INO. */ -/*0x08*/unsigned int __virt_irq; -/*0x0c*/unsigned int __pad; -}; +#include "entry.h" #define NUM_IVECS (IMAP_INR + 1) + struct ino_bucket *ivector_table; unsigned long ivector_table_pa; diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c index 9a1ba1fe859..aaae865e793 100644 --- a/arch/sparc64/kernel/ptrace.c +++ b/arch/sparc64/kernel/ptrace.c @@ -35,6 +35,9 @@ #include <asm/spitfire.h> #include <asm/page.h> #include <asm/cpudata.h> +#include <asm/cacheflush.h> + +#include "entry.h" /* #define ALLOW_INIT_TRACING */ @@ -67,6 +70,8 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, if (tlb_type == hypervisor) return; + preempt_disable(); + #ifdef DCACHE_ALIASING_POSSIBLE /* If bit 13 of the kernel address we used to access the * user page is the same as the virtual address that page @@ -105,6 +110,8 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, for (; start < end; start += icache_line_size) flushi(start); } + + preempt_enable(); } enum sparc_regset { @@ -382,6 +389,7 @@ static const struct user_regset_view user_sparc64_view = { .regsets = sparc64_regsets, .n = ARRAY_SIZE(sparc64_regsets) }; +#ifdef CONFIG_COMPAT static int genregs32_get(struct task_struct *target, const struct user_regset *regset, unsigned int pos, unsigned int count, @@ -676,14 +684,18 @@ static const struct user_regset_view user_sparc32_view = { .name = "sparc", .e_machine = EM_SPARC, .regsets = sparc32_regsets, .n = ARRAY_SIZE(sparc32_regsets) }; +#endif /* CONFIG_COMPAT */ const struct user_regset_view *task_user_regset_view(struct task_struct *task) { +#ifdef CONFIG_COMPAT if (test_tsk_thread_flag(task, TIF_32BIT)) return &user_sparc32_view; +#endif return &user_sparc64_view; } +#ifdef CONFIG_COMPAT struct compat_fps { unsigned int regs[32]; unsigned int fsr; @@ -798,6 +810,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, return ret; } +#endif /* CONFIG_COMPAT */ struct fps { unsigned int regs[64]; @@ -807,11 +820,14 @@ struct fps { long arch_ptrace(struct task_struct *child, long request, long addr, long data) { const struct user_regset_view *view = task_user_regset_view(child); - struct pt_regs __user *pregs = (struct pt_regs __user *) addr; unsigned long addr2 = task_pt_regs(current)->u_regs[UREG_I4]; - struct fps __user *fps = (struct fps __user *) addr; + struct pt_regs __user *pregs; + struct fps __user *fps; int ret; + pregs = (struct pt_regs __user *) (unsigned long) addr; + fps = (struct fps __user *) (unsigned long) addr; + switch (request) { case PTRACE_PEEKUSR: ret = (addr != 0) ? -EIO : 0; diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index d036dbe7286..6acb4c51cfe 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -51,6 +51,8 @@ #include <net/ipconfig.h> #endif +#include "entry.h" + /* Used to synchronize accesses to NatSemi SUPER I/O chip configure * operations in asm/ns87303.h */ @@ -335,9 +337,6 @@ void __init setup_arch(char **cmdline_p) /* BUFFER is PAGE_SIZE bytes long. */ -extern char *sparc_cpu_type; -extern char *sparc_fpu_type; - extern void smp_info(struct seq_file *); extern void smp_bogo(struct seq_file *); extern void mmu_info(struct seq_file *); diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c index fb13775b368..94a9d64208e 100644 --- a/arch/sparc64/kernel/signal.c +++ b/arch/sparc64/kernel/signal.c @@ -32,6 +32,9 @@ #include <asm/siginfo.h> #include <asm/visasm.h> +#include "entry.h" +#include "systbls.h" + #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) /* {set, get}context() needed for 64-bit SparcLinux userland. */ diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 5a1126b363a..59f020d69d4 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -1,6 +1,6 @@ /* smp.c: Sparc64 SMP support. * - * Copyright (C) 1997, 2007 David S. Miller (davem@davemloft.net) + * Copyright (C) 1997, 2007, 2008 David S. Miller (davem@davemloft.net) */ #include <linux/module.h> @@ -30,6 +30,7 @@ #include <asm/cpudata.h> #include <asm/hvtramp.h> #include <asm/io.h> +#include <asm/timer.h> #include <asm/irq.h> #include <asm/irq_regs.h> diff --git a/arch/sparc64/kernel/stacktrace.c b/arch/sparc64/kernel/stacktrace.c index 47f92a59be1..84d39e873e8 100644 --- a/arch/sparc64/kernel/stacktrace.c +++ b/arch/sparc64/kernel/stacktrace.c @@ -2,13 +2,15 @@ #include <linux/stacktrace.h> #include <linux/thread_info.h> #include <asm/ptrace.h> +#include <asm/stacktrace.h> void save_stack_trace(struct stack_trace *trace) { unsigned long ksp, fp, thread_base; struct thread_info *tp = task_thread_info(current); - flushw_all(); + stack_trace_flush(); + __asm__ __volatile__( "mov %%fp, %0" : "=r" (ksp) diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c index 134d801579f..f952745d0f3 100644 --- a/arch/sparc64/kernel/sys_sparc.c +++ b/arch/sparc64/kernel/sys_sparc.c @@ -1,5 +1,4 @@ -/* $Id: sys_sparc.c,v 1.57 2002/02/09 19:49:30 davem Exp $ - * linux/arch/sparc64/kernel/sys_sparc.c +/* linux/arch/sparc64/kernel/sys_sparc.c * * This file contains various random system calls that * have a non-standard calling sequence on the Linux/sparc @@ -30,6 +29,9 @@ #include <asm/perfctr.h> #include <asm/unistd.h> +#include "entry.h" +#include "systbls.h" + /* #define DEBUG_UNIMP_SYSCALL */ asmlinkage unsigned long sys_getpagesize(void) @@ -445,7 +447,8 @@ asmlinkage long sys_ipc(unsigned int call, int first, unsigned long second, goto out; case SEMTIMEDOP: err = sys_semtimedop(first, ptr, (unsigned)second, - (const struct timespec __user *) fifth); + (const struct timespec __user *) + (unsigned long) fifth); goto out; case SEMGET: err = sys_semget(first, (int)second, (int)third); @@ -788,7 +791,7 @@ asmlinkage long sys_utrap_install(utrap_entry_t type, } else { if ((utrap_handler_t)current_thread_info()->utraps[type] != new_p && current_thread_info()->utraps[0] > 1) { - long *p = current_thread_info()->utraps; + unsigned long *p = current_thread_info()->utraps; current_thread_info()->utraps = kmalloc((UT_TRAP_INSTRUCTION_31+1)*sizeof(long), @@ -816,7 +819,8 @@ asmlinkage long sys_utrap_install(utrap_entry_t type, return 0; } -long sparc_memory_ordering(unsigned long model, struct pt_regs *regs) +asmlinkage long sparc_memory_ordering(unsigned long model, + struct pt_regs *regs) { if (model >= 3) return -EINVAL; diff --git a/arch/sparc64/kernel/systbls.h b/arch/sparc64/kernel/systbls.h new file mode 100644 index 00000000000..8a0d20a35d0 --- /dev/null +++ b/arch/sparc64/kernel/systbls.h @@ -0,0 +1,53 @@ +#ifndef _SYSTBLS_H +#define _SYSTBLS_H + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/utsname.h> +#include <asm/utrap.h> +#include <asm/signal.h> + +extern asmlinkage unsigned long sys_getpagesize(void); +extern asmlinkage unsigned long sparc_brk(unsigned long brk); +extern asmlinkage long sparc_pipe(struct pt_regs *regs); +extern asmlinkage long sys_ipc(unsigned int call, int first, + unsigned long second, + unsigned long third, + void __user *ptr, long fifth); +extern asmlinkage long sparc64_newuname(struct new_utsname __user *name); +extern asmlinkage long sparc64_personality(unsigned long personality); +extern asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len, + unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long off); +extern asmlinkage long sys64_munmap(unsigned long addr, size_t len); +extern asmlinkage unsigned long sys64_mremap(unsigned long addr, + unsigned long old_len, + unsigned long new_len, + unsigned long flags, + unsigned long new_addr); +extern asmlinkage unsigned long c_sys_nis_syscall(struct pt_regs *regs); +extern asmlinkage long sys_getdomainname(char __user *name, int len); +extern asmlinkage long solaris_syscall(struct pt_regs *regs); +extern asmlinkage long sunos_syscall(struct pt_regs *regs); +extern asmlinkage long sys_utrap_install(utrap_entry_t type, + utrap_handler_t new_p, + utrap_handler_t new_d, + utrap_handler_t __user *old_p, + utrap_handler_t __user *old_d); +extern asmlinkage long sparc_memory_ordering(unsigned long model, + struct pt_regs *regs); +extern asmlinkage long sys_rt_sigaction(int sig, + const struct sigaction __user *act, + struct sigaction __user *oact, + void __user *restorer, + size_t sigsetsize); +extern asmlinkage long sys_perfctr(int opcode, unsigned long arg0, + unsigned long arg1, unsigned long arg2); + +extern asmlinkage void sparc64_set_context(struct pt_regs *regs); +extern asmlinkage void sparc64_get_context(struct pt_regs *regs); +extern asmlinkage long sys_sigpause(unsigned int set); +extern asmlinkage long sys_sigsuspend(old_sigset_t set); +extern void do_rt_sigreturn(struct pt_regs *regs); + +#endif /* _SYSTBLS_H */ diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index d204f1ab1d4..e5d238970c7 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -1,7 +1,6 @@ -/* $Id: time.c,v 1.42 2002/01/23 14:33:55 davem Exp $ - * time.c: UltraSparc timer and TOD clock support. +/* time.c: UltraSparc timer and TOD clock support. * - * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1997, 2008 David S. Miller (davem@davemloft.net) * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) * * Based largely on code which is: @@ -48,6 +47,8 @@ #include <asm/uaccess.h> #include <asm/irq_regs.h> +#include "entry.h" + DEFINE_SPINLOCK(mostek_lock); DEFINE_SPINLOCK(rtc_lock); void __iomem *mstk48t02_regs = NULL; @@ -508,6 +509,37 @@ static int __init has_low_battery(void) return (data1 == data2); /* Was the write blocked? */ } +static void __init mostek_set_system_time(void __iomem *mregs) +{ + unsigned int year, mon, day, hour, min, sec; + u8 tmp; + + spin_lock_irq(&mostek_lock); + + /* Traditional Mostek chip. */ + tmp = mostek_read(mregs + MOSTEK_CREG); + tmp |= MSTK_CREG_READ; + mostek_write(mregs + MOSTEK_CREG, tmp); + + sec = MSTK_REG_SEC(mregs); + min = MSTK_REG_MIN(mregs); + hour = MSTK_REG_HOUR(mregs); + day = MSTK_REG_DOM(mregs); + mon = MSTK_REG_MONTH(mregs); + year = MSTK_CVT_YEAR( MSTK_REG_YEAR(mregs) ); + + xtime.tv_sec = mktime(year, mon, day, hour, min, sec); + xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ); + set_normalized_timespec(&wall_to_monotonic, + -xtime.tv_sec, -xtime.tv_nsec); + + tmp = mostek_read(mregs + MOSTEK_CREG); + tmp &= ~MSTK_CREG_READ; + mostek_write(mregs + MOSTEK_CREG, tmp); + + spin_unlock_irq(&mostek_lock); +} + /* Probe for the real time clock chip. */ static void __init set_system_time(void) { @@ -520,7 +552,6 @@ static void __init set_system_time(void) unsigned long dregs = 0UL; void __iomem *bregs = 0UL; #endif - u8 tmp; if (!mregs && !dregs && !bregs) { prom_printf("Something wrong, clock regs not mapped yet.\n"); @@ -528,20 +559,11 @@ static void __init set_system_time(void) } if (mregs) { - spin_lock_irq(&mostek_lock); - - /* Traditional Mostek chip. */ - tmp = mostek_read(mregs + MOSTEK_CREG); - tmp |= MSTK_CREG_READ; - mostek_write(mregs + MOSTEK_CREG, tmp); + mostek_set_system_time(mregs); + return; + } - sec = MSTK_REG_SEC(mregs); - min = MSTK_REG_MIN(mregs); - hour = MSTK_REG_HOUR(mregs); - day = MSTK_REG_DOM(mregs); - mon = MSTK_REG_MONTH(mregs); - year = MSTK_CVT_YEAR( MSTK_REG_YEAR(mregs) ); - } else if (bregs) { + if (bregs) { unsigned char val = readb(bregs + 0x0e); unsigned int century; @@ -596,14 +618,6 @@ static void __init set_system_time(void) xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ); set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); - - if (mregs) { - tmp = mostek_read(mregs + MOSTEK_CREG); - tmp &= ~MSTK_CREG_READ; - mostek_write(mregs + MOSTEK_CREG, tmp); - - spin_unlock_irq(&mostek_lock); - } } /* davem suggests we keep this within the 4M locked kernel image */ @@ -1027,7 +1041,7 @@ void __init time_init(void) setup_clockevent_multiplier(clock); sparc64_clockevent.max_delta_ns = - clockevent_delta2ns(0x7fffffffffffffff, &sparc64_clockevent); + clockevent_delta2ns(0x7fffffffffffffffUL, &sparc64_clockevent); sparc64_clockevent.min_delta_ns = clockevent_delta2ns(0xF, &sparc64_clockevent); diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 007f5317c0d..96da847023f 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -42,6 +42,7 @@ #endif #include <asm/prom.h> +#include "entry.h" /* When an irrecoverable trap occurs at tl > 0, the trap entry * code logs the trap state registers at every level in the trap @@ -77,11 +78,6 @@ static void dump_tl1_traplog(struct tl1_traplog *p) } } -void do_call_debug(struct pt_regs *regs) -{ - notify_die(DIE_CALL, "debug call", regs, 0, 255, SIGINT); -} - void bad_trap(struct pt_regs *regs, long lvl) { char buffer[32]; @@ -550,41 +546,6 @@ static unsigned long ecache_flush_physbase; static unsigned long ecache_flush_linesize; static unsigned long ecache_flush_size; -/* WARNING: The error trap handlers in assembly know the precise - * layout of the following structure. - * - * C-level handlers below use this information to log the error - * and then determine how to recover (if possible). - */ -struct cheetah_err_info { -/*0x00*/u64 afsr; -/*0x08*/u64 afar; - - /* D-cache state */ -/*0x10*/u64 dcache_data[4]; /* The actual data */ -/*0x30*/u64 dcache_index; /* D-cache index */ -/*0x38*/u64 dcache_tag; /* D-cache tag/valid */ -/*0x40*/u64 dcache_utag; /* D-cache microtag */ -/*0x48*/u64 dcache_stag; /* D-cache snooptag */ - - /* I-cache state */ -/*0x50*/u64 icache_data[8]; /* The actual insns + predecode */ -/*0x90*/u64 icache_index; /* I-cache index */ -/*0x98*/u64 icache_tag; /* I-cache phys tag */ -/*0xa0*/u64 icache_utag; /* I-cache microtag */ -/*0xa8*/u64 icache_stag; /* I-cache snooptag */ -/*0xb0*/u64 icache_upper; /* I-cache upper-tag */ -/*0xb8*/u64 icache_lower; /* I-cache lower-tag */ - - /* E-cache state */ -/*0xc0*/u64 ecache_data[4]; /* 32 bytes from staging registers */ -/*0xe0*/u64 ecache_index; /* E-cache index */ -/*0xe8*/u64 ecache_tag; /* E-cache tag/state */ - -/*0xf0*/u64 __pad[32 - 30]; -}; -#define CHAFSR_INVALID ((u64)-1L) - /* This table is ordered in priority of errors and matches the * AFAR overwrite policy as well. */ @@ -758,10 +719,6 @@ static struct afsr_error_table __jalapeno_error_table[] = { static struct afsr_error_table *cheetah_error_table; static unsigned long cheetah_afsr_errors; -/* This is allocated at boot time based upon the largest hardware - * cpu ID in the system. We allocate two entries per cpu, one for - * TL==0 logging and one for TL >= 1 logging. - */ struct cheetah_err_info *cheetah_error_log; static inline struct cheetah_err_info *cheetah_get_error_log(unsigned long afsr) @@ -2102,7 +2059,7 @@ void do_div0(struct pt_regs *regs) force_sig_info(SIGFPE, &info, current); } -void instruction_dump (unsigned int *pc) +static void instruction_dump(unsigned int *pc) { int i; @@ -2115,7 +2072,7 @@ void instruction_dump (unsigned int *pc) printk("\n"); } -static void user_instruction_dump (unsigned int __user *pc) +static void user_instruction_dump(unsigned int __user *pc) { int i; unsigned int buf[9]; diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 466fd6cffac..f37078d9640 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -46,6 +46,7 @@ #include <asm/prom.h> #include <asm/sstate.h> #include <asm/mdesc.h> +#include <asm/cpudata.h> #define MAX_PHYS_ADDRESS (1UL << 42UL) #define KPTE_BITMAP_CHUNK_SZ (256UL * 1024UL * 1024UL) @@ -1273,10 +1274,6 @@ void __cpuinit sun4v_ktsb_register(void) /* paging_init() sets up the page tables */ -extern void cheetah_ecache_flush_init(void); -extern void sun4v_patch_tlb_handlers(void); - -extern void cpu_probe(void); extern void central_probe(void); static unsigned long last_valid_pfn; diff --git a/arch/sparc64/mm/tlb.c b/arch/sparc64/mm/tlb.c index 3f10fc921b0..a0f000b293d 100644 --- a/arch/sparc64/mm/tlb.c +++ b/arch/sparc64/mm/tlb.c @@ -23,10 +23,11 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers) = { 0, }; void flush_tlb_pending(void) { - struct mmu_gather *mp = &__get_cpu_var(mmu_gathers); + struct mmu_gather *mp; preempt_disable(); + mp = &__get_cpu_var(mmu_gathers); if (mp->tlb_nr) { flush_tsb_user(mp); diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index 1e8f41a9951..1d43bdfc20c 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -256,11 +256,7 @@ static struct net_device_stats *uml_net_get_stats(struct net_device *dev) static void uml_net_set_multicast_list(struct net_device *dev) { - if (dev->flags & IFF_PROMISC) - return; - else if (dev->mc_count) - dev->flags |= IFF_ALLMULTI; - else dev->flags &= ~IFF_ALLMULTI; + return; } static void uml_net_tx_timeout(struct net_device *dev) diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c index f2b5a621d27..8a85c93bd62 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c @@ -63,7 +63,7 @@ static struct cpufreq_frequency_table speedstep_freqs[] = { */ static int speedstep_smi_ownership (void) { - u32 command, result, magic; + u32 command, result, magic, dummy; u32 function = GET_SPEEDSTEP_OWNER; unsigned char magic_data[] = "Copyright (c) 1999 Intel Corporation"; @@ -73,8 +73,11 @@ static int speedstep_smi_ownership (void) dprintk("trying to obtain ownership with command %x at port %x\n", command, smi_port); __asm__ __volatile__( + "push %%ebp\n" "out %%al, (%%dx)\n" - : "=D" (result) + "pop %%ebp\n" + : "=D" (result), "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy), + "=S" (dummy) : "a" (command), "b" (function), "c" (0), "d" (smi_port), "D" (0), "S" (magic) : "memory" @@ -96,7 +99,7 @@ static int speedstep_smi_ownership (void) */ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high) { - u32 command, result = 0, edi, high_mhz, low_mhz; + u32 command, result = 0, edi, high_mhz, low_mhz, dummy; u32 state=0; u32 function = GET_SPEEDSTEP_FREQS; @@ -109,10 +112,12 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high) dprintk("trying to determine frequencies with command %x at port %x\n", command, smi_port); - __asm__ __volatile__("movl $0, %%edi\n" + __asm__ __volatile__( + "push %%ebp\n" "out %%al, (%%dx)\n" - : "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi) - : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0) + "pop %%ebp" + : "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi), "=S" (dummy) + : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0) ); dprintk("result %x, low_freq %u, high_freq %u\n", result, low_mhz, high_mhz); @@ -135,16 +140,18 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high) static int speedstep_get_state (void) { u32 function=GET_SPEEDSTEP_STATE; - u32 result, state, edi, command; + u32 result, state, edi, command, dummy; command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); dprintk("trying to determine current setting with command %x at port %x\n", command, smi_port); - __asm__ __volatile__("movl $0, %%edi\n" + __asm__ __volatile__( + "push %%ebp\n" "out %%al, (%%dx)\n" - : "=a" (result), "=b" (state), "=D" (edi) - : "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0) + "pop %%ebp\n" + : "=a" (result), "=b" (state), "=D" (edi), "=c" (dummy), "=d" (dummy), "=S" (dummy) + : "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0), "D" (0) ); dprintk("state is %x, result is %x\n", state, result); @@ -160,7 +167,7 @@ static int speedstep_get_state (void) */ static void speedstep_set_state (unsigned int state) { - unsigned int result = 0, command, new_state; + unsigned int result = 0, command, new_state, dummy; unsigned long flags; unsigned int function=SET_SPEEDSTEP_STATE; unsigned int retry = 0; @@ -182,10 +189,12 @@ static void speedstep_set_state (unsigned int state) } retry++; __asm__ __volatile__( - "movl $0, %%edi\n" + "push %%ebp\n" "out %%al, (%%dx)\n" - : "=b" (new_state), "=D" (result) - : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0) + "pop %%ebp" + : "=b" (new_state), "=D" (result), "=c" (dummy), "=a" (dummy), + "=d" (dummy), "=S" (dummy) + : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0) ); } while ((new_state != state) && (retry <= SMI_TRIES)); @@ -195,7 +204,7 @@ static void speedstep_set_state (unsigned int state) if (new_state == state) { dprintk("change to %u MHz succeeded after %u tries with result %u\n", (speedstep_freqs[new_state].frequency / 1000), retry, result); } else { - printk(KERN_ERR "cpufreq: change failed with new_state %u and result %u\n", new_state, result); + printk(KERN_ERR "cpufreq: change to state %u failed with new_state %u and result %u\n", state, new_state, result); } return; diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index 103d61a59b1..3e18db4cefe 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -176,12 +176,13 @@ static inline void k8_enable_fixed_iorrs(void) } /** - * Checks and updates an fixed-range MTRR if it differs from the value it - * should have. If K8 extentions are wanted, update the K8 SYSCFG MSR also. - * see AMD publication no. 24593, chapter 7.8.1, page 233 for more information - * \param msr MSR address of the MTTR which should be checked and updated - * \param changed pointer which indicates whether the MTRR needed to be changed - * \param msrwords pointer to the MSR values which the MSR should have + * set_fixed_range - checks & updates a fixed-range MTRR if it differs from the value it should have + * @msr: MSR address of the MTTR which should be checked and updated + * @changed: pointer which indicates whether the MTRR needed to be changed + * @msrwords: pointer to the MSR values which the MSR should have + * + * If K8 extentions are wanted, update the K8 SYSCFG MSR also. + * See AMD publication no. 24593, chapter 7.8.1, page 233 for more information. */ static void set_fixed_range(int msr, bool *changed, unsigned int *msrwords) { @@ -199,12 +200,15 @@ static void set_fixed_range(int msr, bool *changed, unsigned int *msrwords) } } +/** + * generic_get_free_region - Get a free MTRR. + * @base: The starting (base) address of the region. + * @size: The size (in bytes) of the region. + * @replace_reg: mtrr index to be replaced; set to invalid value if none. + * + * Returns: The index of the region on success, else negative on error. + */ int generic_get_free_region(unsigned long base, unsigned long size, int replace_reg) -/* [SUMMARY] Get a free MTRR. - <base> The starting (base) address of the region. - <size> The size (in bytes) of the region. - [RETURNS] The index of the region on success, else -1 on error. -*/ { int i, max; mtrr_type ltype; @@ -249,8 +253,8 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base, } /** - * Checks and updates the fixed-range MTRRs if they differ from the saved set - * \param frs pointer to fixed-range MTRR values, saved by get_fixed_ranges() + * set_fixed_ranges - checks & updates the fixed-range MTRRs if they differ from the saved set + * @frs: pointer to fixed-range MTRR values, saved by get_fixed_ranges() */ static int set_fixed_ranges(mtrr_type * frs) { @@ -294,13 +298,13 @@ static bool set_mtrr_var_ranges(unsigned int index, struct mtrr_var_range *vr) static u32 deftype_lo, deftype_hi; +/** + * set_mtrr_state - Set the MTRR state for this CPU. + * + * NOTE: The CPU must already be in a safe state for MTRR changes. + * RETURNS: 0 if no changes made, else a mask indicating what was changed. + */ static unsigned long set_mtrr_state(void) -/* [SUMMARY] Set the MTRR state for this CPU. - <state> The MTRR state information to read. - <ctxt> Some relevant CPU context. - [NOTE] The CPU must already be in a safe state for MTRR changes. - [RETURNS] 0 if no changes made, else a mask indication what was changed. -*/ { unsigned int i; unsigned long change_mask = 0; diff --git a/arch/x86/kernel/io_delay.c b/arch/x86/kernel/io_delay.c index c706a306155..5921e5f0a64 100644 --- a/arch/x86/kernel/io_delay.c +++ b/arch/x86/kernel/io_delay.c @@ -78,6 +78,14 @@ static struct dmi_system_id __initdata io_delay_0xed_port_dmi_table[] = { }, { .callback = dmi_io_delay_0xed_port, + .ident = "HP Pavilion dv6000", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"), + DMI_MATCH(DMI_BOARD_NAME, "30B8") + } + }, + { + .callback = dmi_io_delay_0xed_port, .ident = "HP Pavilion tx1000", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"), diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c index 027fc067b39..b402c0f3f19 100644 --- a/arch/x86/kernel/mfgpt_32.c +++ b/arch/x86/kernel/mfgpt_32.c @@ -30,6 +30,7 @@ #include <linux/kernel.h> #include <linux/interrupt.h> +#include <linux/module.h> #include <asm/geode.h> static struct mfgpt_timer_t { diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index d5904eef1d3..eb92ccbb350 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -600,21 +600,6 @@ static int ptrace_bts_read_record(struct task_struct *child, return sizeof(ret); } -static int ptrace_bts_write_record(struct task_struct *child, - const struct bts_struct *in) -{ - int retval; - - if (!child->thread.ds_area_msr) - return -ENXIO; - - retval = ds_write_bts((void *)child->thread.ds_area_msr, in); - if (retval) - return retval; - - return sizeof(*in); -} - static int ptrace_bts_clear(struct task_struct *child) { if (!child->thread.ds_area_msr) @@ -657,75 +642,6 @@ static int ptrace_bts_drain(struct task_struct *child, return end; } -static int ptrace_bts_realloc(struct task_struct *child, - int size, int reduce_size) -{ - unsigned long rlim, vm; - int ret, old_size; - - if (size < 0) - return -EINVAL; - - old_size = ds_get_bts_size((void *)child->thread.ds_area_msr); - if (old_size < 0) - return old_size; - - ret = ds_free((void **)&child->thread.ds_area_msr); - if (ret < 0) - goto out; - - size >>= PAGE_SHIFT; - old_size >>= PAGE_SHIFT; - - current->mm->total_vm -= old_size; - current->mm->locked_vm -= old_size; - - if (size == 0) - goto out; - - rlim = current->signal->rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT; - vm = current->mm->total_vm + size; - if (rlim < vm) { - ret = -ENOMEM; - - if (!reduce_size) - goto out; - - size = rlim - current->mm->total_vm; - if (size <= 0) - goto out; - } - - rlim = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT; - vm = current->mm->locked_vm + size; - if (rlim < vm) { - ret = -ENOMEM; - - if (!reduce_size) - goto out; - - size = rlim - current->mm->locked_vm; - if (size <= 0) - goto out; - } - - ret = ds_allocate((void **)&child->thread.ds_area_msr, - size << PAGE_SHIFT); - if (ret < 0) - goto out; - - current->mm->total_vm += size; - current->mm->locked_vm += size; - -out: - if (child->thread.ds_area_msr) - set_tsk_thread_flag(child, TIF_DS_AREA_MSR); - else - clear_tsk_thread_flag(child, TIF_DS_AREA_MSR); - - return ret; -} - static int ptrace_bts_config(struct task_struct *child, long cfg_size, const struct ptrace_bts_config __user *ucfg) @@ -828,6 +744,91 @@ static int ptrace_bts_status(struct task_struct *child, return sizeof(cfg); } + +static int ptrace_bts_write_record(struct task_struct *child, + const struct bts_struct *in) +{ + int retval; + + if (!child->thread.ds_area_msr) + return -ENXIO; + + retval = ds_write_bts((void *)child->thread.ds_area_msr, in); + if (retval) + return retval; + + return sizeof(*in); +} + +static int ptrace_bts_realloc(struct task_struct *child, + int size, int reduce_size) +{ + unsigned long rlim, vm; + int ret, old_size; + + if (size < 0) + return -EINVAL; + + old_size = ds_get_bts_size((void *)child->thread.ds_area_msr); + if (old_size < 0) + return old_size; + + ret = ds_free((void **)&child->thread.ds_area_msr); + if (ret < 0) + goto out; + + size >>= PAGE_SHIFT; + old_size >>= PAGE_SHIFT; + + current->mm->total_vm -= old_size; + current->mm->locked_vm -= old_size; + + if (size == 0) + goto out; + + rlim = current->signal->rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT; + vm = current->mm->total_vm + size; + if (rlim < vm) { + ret = -ENOMEM; + + if (!reduce_size) + goto out; + + size = rlim - current->mm->total_vm; + if (size <= 0) + goto out; + } + + rlim = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT; + vm = current->mm->locked_vm + size; + if (rlim < vm) { + ret = -ENOMEM; + + if (!reduce_size) + goto out; + + size = rlim - current->mm->locked_vm; + if (size <= 0) + goto out; + } + + ret = ds_allocate((void **)&child->thread.ds_area_msr, + size << PAGE_SHIFT); + if (ret < 0) + goto out; + + current->mm->total_vm += size; + current->mm->locked_vm += size; + +out: + if (child->thread.ds_area_msr) + set_tsk_thread_flag(child, TIF_DS_AREA_MSR); + else + clear_tsk_thread_flag(child, TIF_DS_AREA_MSR); + + return ret; +} + void ptrace_bts_take_timestamp(struct task_struct *tsk, enum bts_qualifier qualifier) { diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index a1d7071a51c..2b3e5d45176 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -406,8 +406,6 @@ static unsigned long __init setup_memory(void) */ min_low_pfn = PFN_UP(init_pg_tables_end); - find_max_pfn(); - max_low_pfn = find_max_low_pfn(); #ifdef CONFIG_HIGHMEM @@ -764,12 +762,13 @@ void __init setup_arch(char **cmdline_p) if (efi_enabled) efi_init(); - max_low_pfn = setup_memory(); - /* update e820 for memory not covered by WB MTRRs */ + find_max_pfn(); mtrr_bp_init(); if (mtrr_trim_uncached_memory(max_pfn)) - max_low_pfn = setup_memory(); + find_max_pfn(); + + max_low_pfn = setup_memory(); #ifdef CONFIG_VMI /* diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 7637dc91c79..f4f7ecfb898 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -801,7 +801,7 @@ static void __cpuinit srat_detect_node(void) /* Don't do the funky fallback heuristics the AMD version employs for now. */ node = apicid_to_node[apicid]; - if (node == NUMA_NO_NODE) + if (node == NUMA_NO_NODE || !node_online(node)) node = first_node(node_online_map); numa_set_node(cpu, node); diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index a104c532ff7..3335b4595ef 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -10,21 +10,19 @@ * (such as the example in Documentation/lguest/lguest.c) is called the * Launcher. * - * Secondly, we only run specially modified Guests, not normal kernels. When - * you set CONFIG_LGUEST to 'y' or 'm', this automatically sets - * CONFIG_LGUEST_GUEST=y, which compiles this file into the kernel so it knows - * how to be a Guest. This means that you can use the same kernel you boot - * normally (ie. as a Host) as a Guest. + * Secondly, we only run specially modified Guests, not normal kernels: setting + * CONFIG_LGUEST_GUEST to "y" compiles this file into the kernel so it knows + * how to be a Guest at boot time. This means that you can use the same kernel + * you boot normally (ie. as a Host) as a Guest. * * These Guests know that they cannot do privileged operations, such as disable * interrupts, and that they have to ask the Host to do such things explicitly. * This file consists of all the replacements for such low-level native * hardware operations: these special Guest versions call the Host. * - * So how does the kernel know it's a Guest? The Guest starts at a special - * entry point marked with a magic string, which sets up a few things then - * calls here. We replace the native functions various "paravirt" structures - * with our Guest versions, then boot like normal. :*/ + * So how does the kernel know it's a Guest? We'll see that later, but let's + * just say that we end up here where we replace the native functions various + * "paravirt" structures with our Guest versions, then boot like normal. :*/ /* * Copyright (C) 2006, Rusty Russell <rusty@rustcorp.com.au> IBM Corporation. @@ -134,7 +132,7 @@ static void async_hcall(unsigned long call, unsigned long arg1, * lguest_leave_lazy_mode(). * * So, when we're in lazy mode, we call async_hcall() to store the call for - * future processing. */ + * future processing: */ static void lazy_hcall(unsigned long call, unsigned long arg1, unsigned long arg2, @@ -147,7 +145,7 @@ static void lazy_hcall(unsigned long call, } /* When lazy mode is turned off reset the per-cpu lazy mode variable and then - * issue a hypercall to flush any stored calls. */ + * issue the do-nothing hypercall to flush any stored calls. */ static void lguest_leave_lazy_mode(void) { paravirt_leave_lazy(paravirt_get_lazy_mode()); @@ -164,7 +162,7 @@ static void lguest_leave_lazy_mode(void) * * So instead we keep an "irq_enabled" field inside our "struct lguest_data", * which the Guest can update with a single instruction. The Host knows to - * check there when it wants to deliver an interrupt. + * check there before it tries to deliver an interrupt. */ /* save_flags() is expected to return the processor state (ie. "flags"). The @@ -196,10 +194,15 @@ static void irq_enable(void) /*M:003 Note that we don't check for outstanding interrupts when we re-enable * them (or when we unmask an interrupt). This seems to work for the moment, * since interrupts are rare and we'll just get the interrupt on the next timer - * tick, but when we turn on CONFIG_NO_HZ, we should revisit this. One way + * tick, but now we can run with CONFIG_NO_HZ, we should revisit this. One way * would be to put the "irq_enabled" field in a page by itself, and have the * Host write-protect it when an interrupt comes in when irqs are disabled. - * There will then be a page fault as soon as interrupts are re-enabled. :*/ + * There will then be a page fault as soon as interrupts are re-enabled. + * + * A better method is to implement soft interrupt disable generally for x86: + * instead of disabling interrupts, we set a flag. If an interrupt does come + * in, we then disable them for real. This is uncommon, so we could simply use + * a hypercall for interrupt control and not worry about efficiency. :*/ /*G:034 * The Interrupt Descriptor Table (IDT). @@ -212,6 +215,10 @@ static void irq_enable(void) static void lguest_write_idt_entry(gate_desc *dt, int entrynum, const gate_desc *g) { + /* The gate_desc structure is 8 bytes long: we hand it to the Host in + * two 32-bit chunks. The whole 32-bit kernel used to hand descriptors + * around like this; typesafety wasn't a big concern in Linux's early + * years. */ u32 *desc = (u32 *)g; /* Keep the local copy up to date. */ native_write_idt_entry(dt, entrynum, g); @@ -243,7 +250,8 @@ static void lguest_load_idt(const struct desc_ptr *desc) * * This is the opposite of the IDT code where we have a LOAD_IDT_ENTRY * hypercall and use that repeatedly to load a new IDT. I don't think it - * really matters, but wouldn't it be nice if they were the same? + * really matters, but wouldn't it be nice if they were the same? Wouldn't + * it be even better if you were the one to send the patch to fix it? */ static void lguest_load_gdt(const struct desc_ptr *desc) { @@ -298,9 +306,9 @@ static void lguest_load_tr_desc(void) /* The "cpuid" instruction is a way of querying both the CPU identity * (manufacturer, model, etc) and its features. It was introduced before the - * Pentium in 1993 and keeps getting extended by both Intel and AMD. As you - * might imagine, after a decade and a half this treatment, it is now a giant - * ball of hair. Its entry in the current Intel manual runs to 28 pages. + * Pentium in 1993 and keeps getting extended by both Intel, AMD and others. + * As you might imagine, after a decade and a half this treatment, it is now a + * giant ball of hair. Its entry in the current Intel manual runs to 28 pages. * * This instruction even it has its own Wikipedia entry. The Wikipedia entry * has been translated into 4 languages. I am not making this up! @@ -594,17 +602,17 @@ static unsigned long lguest_get_wallclock(void) return lguest_data.time.tv_sec; } -/* The TSC is a Time Stamp Counter. The Host tells us what speed it runs at, - * or 0 if it's unusable as a reliable clock source. This matches what we want - * here: if we return 0 from this function, the x86 TSC clock will not register - * itself. */ +/* The TSC is an Intel thing called the Time Stamp Counter. The Host tells us + * what speed it runs at, or 0 if it's unusable as a reliable clock source. + * This matches what we want here: if we return 0 from this function, the x86 + * TSC clock will give up and not register itself. */ static unsigned long lguest_cpu_khz(void) { return lguest_data.tsc_khz; } -/* If we can't use the TSC, the kernel falls back to our "lguest_clock", where - * we read the time value given to us by the Host. */ +/* If we can't use the TSC, the kernel falls back to our lower-priority + * "lguest_clock", where we read the time value given to us by the Host. */ static cycle_t lguest_clock_read(void) { unsigned long sec, nsec; @@ -648,12 +656,16 @@ static struct clocksource lguest_clock = { static int lguest_clockevent_set_next_event(unsigned long delta, struct clock_event_device *evt) { + /* FIXME: I don't think this can ever happen, but James tells me he had + * to put this code in. Maybe we should remove it now. Anyone? */ if (delta < LG_CLOCK_MIN_DELTA) { if (printk_ratelimit()) printk(KERN_DEBUG "%s: small delta %lu ns\n", __FUNCTION__, delta); return -ETIME; } + + /* Please wake us this far in the future. */ hcall(LHCALL_SET_CLOCKEVENT, delta, 0, 0); return 0; } @@ -738,7 +750,7 @@ static void lguest_time_init(void) * will not tolerate us trying to use that), the stack pointer, and the number * of pages in the stack. */ static void lguest_load_sp0(struct tss_struct *tss, - struct thread_struct *thread) + struct thread_struct *thread) { lazy_hcall(LHCALL_SET_STACK, __KERNEL_DS|0x1, thread->sp0, THREAD_SIZE/PAGE_SIZE); @@ -786,9 +798,8 @@ static void lguest_safe_halt(void) hcall(LHCALL_HALT, 0, 0, 0); } -/* Perhaps CRASH isn't the best name for this hypercall, but we use it to get a - * message out when we're crashing as well as elegant termination like powering - * off. +/* The SHUTDOWN hypercall takes a string to describe what's happening, and + * an argument which says whether this to restart (reboot) the Guest or not. * * Note that the Host always prefers that the Guest speak in physical addresses * rather than virtual addresses, so we use __pa() here. */ @@ -816,8 +827,9 @@ static struct notifier_block paniced = { /* Setting up memory is fairly easy. */ static __init char *lguest_memory_setup(void) { - /* We do this here and not earlier because lockcheck barfs if we do it - * before start_kernel() */ + /* We do this here and not earlier because lockcheck used to barf if we + * did it before start_kernel(). I think we fixed that, so it'd be + * nice to move it back to lguest_init. Patch welcome... */ atomic_notifier_chain_register(&panic_notifier_list, &paniced); /* The Linux bootloader header contains an "e820" memory map: the @@ -850,12 +862,19 @@ static __init int early_put_chars(u32 vtermno, const char *buf, int count) return len; } +/* Rebooting also tells the Host we're finished, but the RESTART flag tells the + * Launcher to reboot us. */ +static void lguest_restart(char *reason) +{ + hcall(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART, 0); +} + /*G:050 * Patching (Powerfully Placating Performance Pedants) * - * We have already seen that pv_ops structures let us replace simple - * native instructions with calls to the appropriate back end all throughout - * the kernel. This allows the same kernel to run as a Guest and as a native + * We have already seen that pv_ops structures let us replace simple native + * instructions with calls to the appropriate back end all throughout the + * kernel. This allows the same kernel to run as a Guest and as a native * kernel, but it's slow because of all the indirect branches. * * Remember that David Wheeler quote about "Any problem in computer science can @@ -908,14 +927,9 @@ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf, return insn_len; } -static void lguest_restart(char *reason) -{ - hcall(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART, 0); -} - -/*G:030 Once we get to lguest_init(), we know we're a Guest. The pv_ops - * structures in the kernel provide points for (almost) every routine we have - * to override to avoid privileged instructions. */ +/*G:030 Once we get to lguest_init(), we know we're a Guest. The various + * pv_ops structures in the kernel provide points for (almost) every routine we + * have to override to avoid privileged instructions. */ __init void lguest_init(void) { /* We're under lguest, paravirt is enabled, and we're running at @@ -1003,9 +1017,9 @@ __init void lguest_init(void) * the normal data segment to get through booting. */ asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_DS) : "memory"); - /* The Host uses the top of the Guest's virtual address space for the - * Host<->Guest Switcher, and it tells us how big that is in - * lguest_data.reserve_mem, set up on the LGUEST_INIT hypercall. */ + /* The Host<->Guest Switcher lives at the top of our address space, and + * the Host told us how big it is when we made LGUEST_INIT hypercall: + * it put the answer in lguest_data.reserve_mem */ reserve_top_address(lguest_data.reserve_mem); /* If we don't initialize the lock dependency checker now, it crashes @@ -1027,6 +1041,7 @@ __init void lguest_init(void) /* Math is always hard! */ new_cpu_data.hard_math = 1; + /* We don't have features. We have puppies! Puppies! */ #ifdef CONFIG_X86_MCE mce_disabled = 1; #endif @@ -1044,10 +1059,11 @@ __init void lguest_init(void) virtio_cons_early_init(early_put_chars); /* Last of all, we set the power management poweroff hook to point to - * the Guest routine to power off. */ + * the Guest routine to power off, and the reboot hook to our restart + * routine. */ pm_power_off = lguest_power_off; - machine_ops.restart = lguest_restart; + /* Now we're set up, call start_kernel() in init/main.c and we proceed * to boot as normal. It never returns. */ start_kernel(); diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S index 95b6fbcded6..5c7cef34c9e 100644 --- a/arch/x86/lguest/i386_head.S +++ b/arch/x86/lguest/i386_head.S @@ -5,13 +5,20 @@ #include <asm/thread_info.h> #include <asm/processor-flags.h> -/*G:020 This is where we begin: head.S notes that the boot header's platform - * type field is "1" (lguest), so calls us here. +/*G:020 Our story starts with the kernel booting into startup_32 in + * arch/x86/kernel/head_32.S. It expects a boot header, which is created by + * the bootloader (the Launcher in our case). + * + * The startup_32 function does very little: it clears the uninitialized global + * C variables which we expect to be zero (ie. BSS) and then copies the boot + * header and kernel command line somewhere safe. Finally it checks the + * 'hardware_subarch' field. This was introduced in 2.6.24 for lguest and Xen: + * if it's set to '1' (lguest's assigned number), then it calls us here. * * WARNING: be very careful here! We're running at addresses equal to physical * addesses (around 0), not above PAGE_OFFSET as most code expectes * (eg. 0xC0000000). Jumps are relative, so they're OK, but we can't touch any - * data. + * data without remembering to subtract __PAGE_OFFSET! * * The .section line puts this code in .init.text so it will be discarded after * boot. */ @@ -24,7 +31,7 @@ ENTRY(lguest_entry) int $LGUEST_TRAP_ENTRY /* The Host put the toplevel pagetable in lguest_data.pgdir. The movsl - * instruction uses %esi implicitly as the source for the copy we' + * instruction uses %esi implicitly as the source for the copy we're * about to do. */ movl lguest_data - __PAGE_OFFSET + LGUEST_DATA_pgdir, %esi diff --git a/arch/x86/mach-rdc321x/gpio.c b/arch/x86/mach-rdc321x/gpio.c index 031269163bd..247f33d3a40 100644 --- a/arch/x86/mach-rdc321x/gpio.c +++ b/arch/x86/mach-rdc321x/gpio.c @@ -1,91 +1,194 @@ /* - * Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org> - * RDC321x architecture specific GPIO support + * GPIO support for RDC SoC R3210/R8610 + * + * Copyright (C) 2007, Florian Fainelli <florian@openwrt.org> + * Copyright (C) 2008, Volker Weiss <dev@tintuc.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ -#include <linux/autoconf.h> -#include <linux/init.h> + +#include <linux/spinlock.h> #include <linux/io.h> #include <linux/types.h> #include <linux/module.h> -#include <linux/delay.h> +#include <asm/gpio.h> #include <asm/mach-rdc321x/rdc321x_defs.h> -static inline int rdc_gpio_is_valid(unsigned gpio) + +/* spin lock to protect our private copy of GPIO data register plus + the access to PCI conf registers. */ +static DEFINE_SPINLOCK(gpio_lock); + +/* copy of GPIO data registers */ +static u32 gpio_data_reg1; +static u32 gpio_data_reg2; + +static u32 gpio_request_data[2]; + + +static inline void rdc321x_conf_write(unsigned addr, u32 value) { - return (gpio <= RDC_MAX_GPIO); + outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR); + outl(value, RDC3210_CFGREG_DATA); } -static unsigned int rdc_gpio_read(unsigned gpio) +static inline void rdc321x_conf_or(unsigned addr, u32 value) { - unsigned int val; - - val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x84:0x48)); - outl(val, RDC3210_CFGREG_ADDR); - udelay(10); - val = inl(RDC3210_CFGREG_DATA); - val |= (0x1 << (gpio & 0x1F)); - outl(val, RDC3210_CFGREG_DATA); - udelay(10); - val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x88:0x4C)); - outl(val, RDC3210_CFGREG_ADDR); - udelay(10); - val = inl(RDC3210_CFGREG_DATA); - - return val; + outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR); + value |= inl(RDC3210_CFGREG_DATA); + outl(value, RDC3210_CFGREG_DATA); } -static void rdc_gpio_write(unsigned int val) +static inline u32 rdc321x_conf_read(unsigned addr) { - if (val) { - outl(val, RDC3210_CFGREG_DATA); - udelay(10); - } + outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR); + + return inl(RDC3210_CFGREG_DATA); } -int rdc_gpio_get_value(unsigned gpio) +/* configure pin as GPIO */ +static void rdc321x_configure_gpio(unsigned gpio) +{ + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + rdc321x_conf_or(gpio < 32 + ? RDC321X_GPIO_CTRL_REG1 : RDC321X_GPIO_CTRL_REG2, + 1 << (gpio & 0x1f)); + spin_unlock_irqrestore(&gpio_lock, flags); +} + +/* initially setup the 2 copies of the gpio data registers. + This function must be called by the platform setup code. */ +void __init rdc321x_gpio_setup() +{ + /* this might not be, what others (BIOS, bootloader, etc.) + wrote to these registers before, but it's a good guess. Still + better than just using 0xffffffff. */ + + gpio_data_reg1 = rdc321x_conf_read(RDC321X_GPIO_DATA_REG1); + gpio_data_reg2 = rdc321x_conf_read(RDC321X_GPIO_DATA_REG2); +} + +/* determine, if gpio number is valid */ +static inline int rdc321x_is_gpio(unsigned gpio) +{ + return gpio <= RDC321X_MAX_GPIO; +} + +/* request GPIO */ +int rdc_gpio_request(unsigned gpio, const char *label) { - if (rdc_gpio_is_valid(gpio)) - return (int)rdc_gpio_read(gpio); - else + unsigned long flags; + + if (!rdc321x_is_gpio(gpio)) return -EINVAL; + + spin_lock_irqsave(&gpio_lock, flags); + if (gpio_request_data[(gpio & 0x20) ? 1 : 0] & (1 << (gpio & 0x1f))) + goto inuse; + gpio_request_data[(gpio & 0x20) ? 1 : 0] |= (1 << (gpio & 0x1f)); + spin_unlock_irqrestore(&gpio_lock, flags); + + return 0; +inuse: + spin_unlock_irqrestore(&gpio_lock, flags); + return -EINVAL; } -EXPORT_SYMBOL(rdc_gpio_get_value); +EXPORT_SYMBOL(rdc_gpio_request); -void rdc_gpio_set_value(unsigned gpio, int value) +/* release previously-claimed GPIO */ +void rdc_gpio_free(unsigned gpio) { - unsigned int val; + unsigned long flags; - if (!rdc_gpio_is_valid(gpio)) + if (!rdc321x_is_gpio(gpio)) return; - val = rdc_gpio_read(gpio); + spin_lock_irqsave(&gpio_lock, flags); + gpio_request_data[(gpio & 0x20) ? 1 : 0] &= ~(1 << (gpio & 0x1f)); + spin_unlock_irqrestore(&gpio_lock, flags); +} +EXPORT_SYMBOL(rdc_gpio_free); + +/* read GPIO pin */ +int rdc_gpio_get_value(unsigned gpio) +{ + u32 reg; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + reg = rdc321x_conf_read(gpio < 32 + ? RDC321X_GPIO_DATA_REG1 : RDC321X_GPIO_DATA_REG2); + spin_unlock_irqrestore(&gpio_lock, flags); - if (value) - val &= ~(0x1 << (gpio & 0x1F)); - else - val |= (0x1 << (gpio & 0x1F)); + return (1 << (gpio & 0x1f)) & reg ? 1 : 0; +} +EXPORT_SYMBOL(rdc_gpio_get_value); - rdc_gpio_write(val); +/* set GPIO pin to value */ +void rdc_gpio_set_value(unsigned gpio, int value) +{ + unsigned long flags; + u32 reg; + + reg = 1 << (gpio & 0x1f); + if (gpio < 32) { + spin_lock_irqsave(&gpio_lock, flags); + if (value) + gpio_data_reg1 |= reg; + else + gpio_data_reg1 &= ~reg; + rdc321x_conf_write(RDC321X_GPIO_DATA_REG1, gpio_data_reg1); + spin_unlock_irqrestore(&gpio_lock, flags); + } else { + spin_lock_irqsave(&gpio_lock, flags); + if (value) + gpio_data_reg2 |= reg; + else + gpio_data_reg2 &= ~reg; + rdc321x_conf_write(RDC321X_GPIO_DATA_REG2, gpio_data_reg2); + spin_unlock_irqrestore(&gpio_lock, flags); + } } EXPORT_SYMBOL(rdc_gpio_set_value); +/* configure GPIO pin as input */ int rdc_gpio_direction_input(unsigned gpio) { + if (!rdc321x_is_gpio(gpio)) + return -EINVAL; + + rdc321x_configure_gpio(gpio); + return 0; } EXPORT_SYMBOL(rdc_gpio_direction_input); +/* configure GPIO pin as output and set value */ int rdc_gpio_direction_output(unsigned gpio, int value) { + if (!rdc321x_is_gpio(gpio)) + return -EINVAL; + + gpio_set_value(gpio, value); + rdc321x_configure_gpio(gpio); + return 0; } EXPORT_SYMBOL(rdc_gpio_direction_output); - - diff --git a/arch/x86/mach-rdc321x/platform.c b/arch/x86/mach-rdc321x/platform.c index dda6024a586..a037041817c 100644 --- a/arch/x86/mach-rdc321x/platform.c +++ b/arch/x86/mach-rdc321x/platform.c @@ -62,6 +62,8 @@ static struct platform_device *rdc321x_devs[] = { static int __init rdc_board_setup(void) { + rdc321x_gpio_setup(); + return platform_add_devices(rdc321x_devs, ARRAY_SIZE(rdc321x_devs)); } diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index c394ca0720b..8e25e06ff73 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -324,7 +324,6 @@ unsigned long __init setup_memory(void) * this space and use it to adjust the boundary between ZONE_NORMAL * and ZONE_HIGHMEM. */ - find_max_pfn(); get_memcfg_numa(); kva_pages = calculate_numa_remap_pages(); diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index fdc667422df..ec08d838985 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -91,12 +91,10 @@ static int is_prefetch(struct pt_regs *regs, unsigned long addr, int prefetch = 0; unsigned char *max_instr; -#ifdef CONFIG_X86_32 - if (!(__supported_pte_mask & _PAGE_NX)) - return 0; -#endif - - /* If it was a exec fault on NX page, ignore */ + /* + * If it was a exec (instruction fetch) fault on NX page, then + * do not ignore the fault: + */ if (error_code & PF_INSTR) return 0; diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c index 3d936f23270..9cf33d3ee5b 100644 --- a/arch/x86/mm/highmem_32.c +++ b/arch/x86/mm/highmem_32.c @@ -73,15 +73,15 @@ void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot) { enum fixed_addresses idx; unsigned long vaddr; - /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */ - - debug_kmap_atomic_prot(type); + /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */ pagefault_disable(); if (!PageHighMem(page)) return page_address(page); + debug_kmap_atomic_prot(type); + idx = type + KM_TYPE_NR*smp_processor_id(); vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); BUG_ON(!pte_none(*(kmap_pte-idx))); diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c index 4fbafb4bc2f..0b3d567e686 100644 --- a/arch/x86/mm/hugetlbpage.c +++ b/arch/x86/mm/hugetlbpage.c @@ -178,7 +178,7 @@ follow_huge_addr(struct mm_struct *mm, unsigned long address, int write) page = &pte_page(*pte)[vpfn % (HPAGE_SIZE/PAGE_SIZE)]; - WARN_ON(!PageCompound(page)); + WARN_ON(!PageHead(page)); return page; } diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 4afaba0ed72..794895c6dcc 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -137,7 +137,11 @@ static void __iomem *__ioremap(resource_size_t phys_addr, unsigned long size, switch (mode) { case IOR_MODE_UNCACHED: default: - prot = PAGE_KERNEL_NOCACHE; + /* + * FIXME: we will use UC MINUS for now, as video fb drivers + * depend on it. Upcoming ioremap_wc() will fix this behavior. + */ + prot = PAGE_KERNEL_UC_MINUS; break; case IOR_MODE_CACHED: prot = PAGE_KERNEL; diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 14e48b5a94b..7b79f6be4e7 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -771,7 +771,7 @@ static inline int change_page_attr_clear(unsigned long addr, int numpages, int set_memory_uc(unsigned long addr, int numpages) { return change_page_attr_set(addr, numpages, - __pgprot(_PAGE_PCD | _PAGE_PWT)); + __pgprot(_PAGE_PCD)); } EXPORT_SYMBOL(set_memory_uc); diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 8b9ee27805f..de4e6f05840 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -95,7 +95,7 @@ struct shared_info *HYPERVISOR_shared_info = (void *)&dummy_shared_info; * * 0: not available, 1: available */ -static int have_vcpu_info_placement = 0; +static int have_vcpu_info_placement = 1; static void __init xen_vcpu_setup(int cpu) { @@ -103,6 +103,7 @@ static void __init xen_vcpu_setup(int cpu) int err; struct vcpu_info *vcpup; + BUG_ON(HYPERVISOR_shared_info == &dummy_shared_info); per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; if (!have_vcpu_info_placement) @@ -805,33 +806,43 @@ static __init void xen_pagetable_setup_start(pgd_t *base) PFN_DOWN(__pa(xen_start_info->pt_base))); } -static __init void xen_pagetable_setup_done(pgd_t *base) +static __init void setup_shared_info(void) { - /* This will work as long as patching hasn't happened yet - (which it hasn't) */ - pv_mmu_ops.alloc_pt = xen_alloc_pt; - pv_mmu_ops.alloc_pd = xen_alloc_pd; - pv_mmu_ops.release_pt = xen_release_pt; - pv_mmu_ops.release_pd = xen_release_pt; - pv_mmu_ops.set_pte = xen_set_pte; - if (!xen_feature(XENFEAT_auto_translated_physmap)) { + unsigned long addr = fix_to_virt(FIX_PARAVIRT_BOOTMAP); + /* * Create a mapping for the shared info page. * Should be set_fixmap(), but shared_info is a machine * address with no corresponding pseudo-phys address. */ - set_pte_mfn(fix_to_virt(FIX_PARAVIRT_BOOTMAP), + set_pte_mfn(addr, PFN_DOWN(xen_start_info->shared_info), PAGE_KERNEL); - HYPERVISOR_shared_info = - (struct shared_info *)fix_to_virt(FIX_PARAVIRT_BOOTMAP); - + HYPERVISOR_shared_info = (struct shared_info *)addr; } else HYPERVISOR_shared_info = (struct shared_info *)__va(xen_start_info->shared_info); +#ifndef CONFIG_SMP + /* In UP this is as good a place as any to set up shared info */ + xen_setup_vcpu_info_placement(); +#endif +} + +static __init void xen_pagetable_setup_done(pgd_t *base) +{ + /* This will work as long as patching hasn't happened yet + (which it hasn't) */ + pv_mmu_ops.alloc_pt = xen_alloc_pt; + pv_mmu_ops.alloc_pd = xen_alloc_pd; + pv_mmu_ops.release_pt = xen_release_pt; + pv_mmu_ops.release_pd = xen_release_pt; + pv_mmu_ops.set_pte = xen_set_pte; + + setup_shared_info(); + /* Actually pin the pagetable down, but we can't set PG_pinned yet because the page structures don't exist yet. */ { @@ -1182,15 +1193,9 @@ asmlinkage void __init xen_start_kernel(void) x86_write_percpu(xen_cr3, __pa(pgd)); x86_write_percpu(xen_current_cr3, __pa(pgd)); -#ifdef CONFIG_SMP /* Don't do the full vcpu_info placement stuff until we have a - possible map. */ + possible map and a non-dummy shared_info. */ per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0]; -#else - /* May as well do it now, since there's no good time to call - it later on UP. */ - xen_setup_vcpu_info_placement(); -#endif pv_info.kernel_rpl = 1; if (xen_feature(XENFEAT_supervisor_mode_kernel)) diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S index 1a43b60c0c6..6b7190449d0 100644 --- a/arch/x86/xen/xen-asm.S +++ b/arch/x86/xen/xen-asm.S @@ -33,12 +33,17 @@ events, then enter the hypervisor to get them handled. */ ENTRY(xen_irq_enable_direct) - /* Clear mask and test pending */ - andw $0x00ff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending + /* Unmask events */ + movb $0, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask + /* Preempt here doesn't matter because that will deal with any pending interrupts. The pending check may end up being run on the wrong CPU, but that doesn't hurt. */ + + /* Test for pending */ + testb $0xff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending jz 1f + 2: call check_events 1: ENDPATCH(xen_irq_enable_direct) |