diff options
Diffstat (limited to 'arch')
76 files changed, 2200 insertions, 610 deletions
diff --git a/arch/Kconfig b/arch/Kconfig index 8bf0fa652eb..f78c2be4242 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -175,4 +175,7 @@ config HAVE_PERF_EVENTS_NMI config HAVE_ARCH_JUMP_LABEL bool +config HAVE_ARCH_MUTEX_CPU_RELAX + bool + source "kernel/gcov/Kconfig" diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index e0b98e71ff4..6c6d7b339aa 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -99,6 +99,7 @@ config S390 select HAVE_KERNEL_LZMA select HAVE_KERNEL_LZO select HAVE_GET_USER_PAGES_FAST + select HAVE_ARCH_MUTEX_CPU_RELAX select ARCH_INLINE_SPIN_TRYLOCK select ARCH_INLINE_SPIN_TRYLOCK_BH select ARCH_INLINE_SPIN_LOCK diff --git a/arch/s390/include/asm/mutex.h b/arch/s390/include/asm/mutex.h index 458c1f7fbc1..688271f5f2e 100644 --- a/arch/s390/include/asm/mutex.h +++ b/arch/s390/include/asm/mutex.h @@ -7,3 +7,5 @@ */ #include <asm-generic/mutex-dec.h> + +#define arch_mutex_cpu_relax() barrier() diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index e330da21b84..b6fccb07123 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -377,6 +377,18 @@ config X86_ELAN If unsure, choose "PC-compatible" instead. +config X86_INTEL_CE + bool "CE4100 TV platform" + depends on PCI + depends on PCI_GODIRECT + depends on X86_32 + depends on X86_EXTENDED_PLATFORM + select X86_REBOOTFIXUPS + ---help--- + Select for the Intel CE media processor (CE4100) SOC. + This option compiles in support for the CE4100 SOC for settop + boxes and media devices. + config X86_MRST bool "Moorestown MID platform" depends on PCI @@ -385,6 +397,10 @@ config X86_MRST depends on X86_EXTENDED_PLATFORM depends on X86_IO_APIC select APB_TIMER + select I2C + select SPI + select INTEL_SCU_IPC + select X86_PLATFORM_DEVICES ---help--- Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin Internet Device(MID) platform. Moorestown consists of two chips: @@ -466,6 +482,19 @@ config X86_ES7000 Support for Unisys ES7000 systems. Say 'Y' here if this kernel is supposed to run on an IA32-based Unisys ES7000 system. +config X86_32_IRIS + tristate "Eurobraille/Iris poweroff module" + depends on X86_32 + ---help--- + The Iris machines from EuroBraille do not have APM or ACPI support + to shut themselves down properly. A special I/O sequence is + needed to do so, which is what this module does at + kernel shutdown. + + This is only for Iris machines from EuroBraille. + + If unused, say N. + config SCHED_OMIT_FRAME_POINTER def_bool y prompt "Single-depth WCHAN output" @@ -1141,16 +1170,16 @@ config NUMA comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI" depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI) -config K8_NUMA +config AMD_NUMA def_bool y prompt "Old style AMD Opteron NUMA detection" depends on X86_64 && NUMA && PCI ---help--- - Enable K8 NUMA node topology detection. You should say Y here if - you have a multi processor AMD K8 system. This uses an old - method to read the NUMA configuration directly from the builtin - Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA - instead, which also takes priority if both are compiled in. + Enable AMD NUMA node topology detection. You should say Y here if + you have a multi processor AMD system. This uses an old method to + read the NUMA configuration directly from the builtin Northbridge + of Opteron. It is recommended to use X86_64_ACPI_NUMA instead, + which also takes priority if both are compiled in. config X86_64_ACPI_NUMA def_bool y diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index b59ee765414..45143bbcfe5 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -117,6 +117,17 @@ config DEBUG_RODATA_TEST feature as well as for the change_page_attr() infrastructure. If in doubt, say "N" +config DEBUG_SET_MODULE_RONX + bool "Set loadable kernel module data as NX and text as RO" + depends on MODULES + ---help--- + This option helps catch unintended modifications to loadable + kernel module's text and read-only data. It also prevents execution + of module data. Such protection may interfere with run-time code + patching and dynamic kernel tracing - and they might also protect + against certain classes of kernel exploits. + If in doubt, say "N". + config DEBUG_NX_TEST tristate "Testcase for the NX non-executable stack feature" depends on DEBUG_KERNEL && m diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index 52f85a196fa..35af09d13dc 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -182,7 +182,7 @@ no_longmode: hlt jmp 1b -#include "../../kernel/verify_cpu_64.S" +#include "../../kernel/verify_cpu.S" /* * Be careful here startup_64 needs to be at a predictable diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h index 4a2adaa9aef..13009d1af99 100644 --- a/arch/x86/include/asm/alternative.h +++ b/arch/x86/include/asm/alternative.h @@ -66,6 +66,7 @@ extern void alternatives_smp_module_add(struct module *mod, char *name, extern void alternatives_smp_module_del(struct module *mod); extern void alternatives_smp_switch(int smp); extern int alternatives_text_reserved(void *start, void *end); +extern bool skip_smp_alternatives; #else static inline void alternatives_smp_module_add(struct module *mod, char *name, void *locks, void *locks_end, diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h index c8517f81b21..6aee50d655d 100644 --- a/arch/x86/include/asm/amd_nb.h +++ b/arch/x86/include/asm/amd_nb.h @@ -3,36 +3,53 @@ #include <linux/pci.h> -extern struct pci_device_id k8_nb_ids[]; +extern struct pci_device_id amd_nb_misc_ids[]; struct bootnode; -extern int early_is_k8_nb(u32 value); -extern int cache_k8_northbridges(void); -extern void k8_flush_garts(void); -extern int k8_get_nodes(struct bootnode *nodes); -extern int k8_numa_init(unsigned long start_pfn, unsigned long end_pfn); -extern int k8_scan_nodes(void); +extern int early_is_amd_nb(u32 value); +extern int amd_cache_northbridges(void); +extern void amd_flush_garts(void); +extern int amd_get_nodes(struct bootnode *nodes); +extern int amd_numa_init(unsigned long start_pfn, unsigned long end_pfn); +extern int amd_scan_nodes(void); -struct k8_northbridge_info { +struct amd_northbridge { + struct pci_dev *misc; +}; + +struct amd_northbridge_info { u16 num; - u8 gart_supported; - struct pci_dev **nb_misc; + u64 flags; + struct amd_northbridge *nb; }; -extern struct k8_northbridge_info k8_northbridges; +extern struct amd_northbridge_info amd_northbridges; + +#define AMD_NB_GART 0x1 +#define AMD_NB_L3_INDEX_DISABLE 0x2 #ifdef CONFIG_AMD_NB -static inline struct pci_dev *node_to_k8_nb_misc(int node) +static inline int amd_nb_num(void) { - return (node < k8_northbridges.num) ? k8_northbridges.nb_misc[node] : NULL; + return amd_northbridges.num; } -#else +static inline int amd_nb_has_feature(int feature) +{ + return ((amd_northbridges.flags & feature) == feature); +} -static inline struct pci_dev *node_to_k8_nb_misc(int node) +static inline struct amd_northbridge *node_to_amd_nb(int node) { - return NULL; + return (node < amd_northbridges.num) ? &amd_northbridges.nb[node] : NULL; } + +#else + +#define amd_nb_num(x) 0 +#define amd_nb_has_feature(x) false +#define node_to_amd_nb(x) NULL + #endif diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index f6ce0bda3b9..cf12007796d 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -238,6 +238,7 @@ extern void setup_boot_APIC_clock(void); extern void setup_secondary_APIC_clock(void); extern int APIC_init_uniprocessor(void); extern void enable_NMI_through_LVT0(void); +extern int apic_force_enable(void); /* * On 32bit this is mach-xxx local diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h index a859ca461fb..47a30ff8e51 100644 --- a/arch/x86/include/asm/apicdef.h +++ b/arch/x86/include/asm/apicdef.h @@ -145,6 +145,7 @@ #ifdef CONFIG_X86_32 # define MAX_IO_APICS 64 +# define MAX_LOCAL_APIC 256 #else # define MAX_IO_APICS 128 # define MAX_LOCAL_APIC 32768 diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h index 8e6218550e7..c8bfe63a06d 100644 --- a/arch/x86/include/asm/bootparam.h +++ b/arch/x86/include/asm/bootparam.h @@ -124,6 +124,7 @@ enum { X86_SUBARCH_LGUEST, X86_SUBARCH_XEN, X86_SUBARCH_MRST, + X86_SUBARCH_CE4100, X86_NR_SUBARCHS, }; diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h index 9479a037419..0141b234406 100644 --- a/arch/x86/include/asm/fixmap.h +++ b/arch/x86/include/asm/fixmap.h @@ -117,6 +117,10 @@ enum fixed_addresses { FIX_TEXT_POKE1, /* reserve 2 pages for text_poke() */ FIX_TEXT_POKE0, /* first page is last, because allocation is backward */ __end_of_permanent_fixed_addresses, + +#ifdef CONFIG_X86_MRST + FIX_LNW_VRTC, +#endif /* * 256 temporary boot-time mappings, used by early_ioremap(), * before ioremap() is functional. diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h index 4aa2bb3b242..ef328901c80 100644 --- a/arch/x86/include/asm/i387.h +++ b/arch/x86/include/asm/i387.h @@ -93,6 +93,17 @@ static inline int fxrstor_checking(struct i387_fxsave_struct *fx) int err; /* See comment in fxsave() below. */ +#ifdef CONFIG_AS_FXSAVEQ + asm volatile("1: fxrstorq %[fx]\n\t" + "2:\n" + ".section .fixup,\"ax\"\n" + "3: movl $-1,%[err]\n" + " jmp 2b\n" + ".previous\n" + _ASM_EXTABLE(1b, 3b) + : [err] "=r" (err) + : [fx] "m" (*fx), "0" (0)); +#else asm volatile("1: rex64/fxrstor (%[fx])\n\t" "2:\n" ".section .fixup,\"ax\"\n" @@ -102,6 +113,7 @@ static inline int fxrstor_checking(struct i387_fxsave_struct *fx) _ASM_EXTABLE(1b, 3b) : [err] "=r" (err) : [fx] "R" (fx), "m" (*fx), "0" (0)); +#endif return err; } @@ -119,6 +131,17 @@ static inline int fxsave_user(struct i387_fxsave_struct __user *fx) return -EFAULT; /* See comment in fxsave() below. */ +#ifdef CONFIG_AS_FXSAVEQ + asm volatile("1: fxsaveq %[fx]\n\t" + "2:\n" + ".section .fixup,\"ax\"\n" + "3: movl $-1,%[err]\n" + " jmp 2b\n" + ".previous\n" + _ASM_EXTABLE(1b, 3b) + : [err] "=r" (err), [fx] "=m" (*fx) + : "0" (0)); +#else asm volatile("1: rex64/fxsave (%[fx])\n\t" "2:\n" ".section .fixup,\"ax\"\n" @@ -128,6 +151,7 @@ static inline int fxsave_user(struct i387_fxsave_struct __user *fx) _ASM_EXTABLE(1b, 3b) : [err] "=r" (err), "=m" (*fx) : [fx] "R" (fx), "0" (0)); +#endif if (unlikely(err) && __clear_user(fx, sizeof(struct i387_fxsave_struct))) err = -EFAULT; diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index a6b28d017c2..0c5ca4e30d7 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -159,7 +159,7 @@ struct io_apic_irq_attr; extern int io_apic_set_pci_routing(struct device *dev, int irq, struct io_apic_irq_attr *irq_attr); void setup_IO_APIC_irq_extra(u32 gsi); -extern void ioapic_init_mappings(void); +extern void ioapic_and_gsi_init(void); extern void ioapic_insert_resources(void); extern struct IO_APIC_route_entry **alloc_ioapic_entries(void); @@ -168,10 +168,9 @@ extern int save_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries); extern void mask_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries); extern int restore_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries); -extern void probe_nr_irqs_gsi(void); extern int get_nr_irqs_gsi(void); - extern void setup_ioapic_ids_from_mpc(void); +extern void setup_ioapic_ids_from_mpc_nocheck(void); struct mp_ioapic_gsi{ u32 gsi_base; @@ -189,9 +188,8 @@ extern void __init pre_init_apic_IRQ0(void); #define io_apic_assign_pci_irqs 0 #define setup_ioapic_ids_from_mpc x86_init_noop static const int timer_through_8259 = 0; -static inline void ioapic_init_mappings(void) { } +static inline void ioapic_and_gsi_init(void) { } static inline void ioapic_insert_resources(void) { } -static inline void probe_nr_irqs_gsi(void) { } #define gsi_top (NR_IRQS_LEGACY) static inline int mp_find_ioapic(u32 gsi) { return 0; } diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index c62c13cb978..eb16e94ae04 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -223,6 +223,9 @@ void intel_init_thermal(struct cpuinfo_x86 *c); void mce_log_therm_throt_event(__u64 status); +/* Interrupt Handler for core thermal thresholds */ +extern int (*platform_thermal_notify)(__u64 msr_val); + #ifdef CONFIG_X86_THERMAL_VECTOR extern void mcheck_intel_therm_init(void); #else diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h index ef51b501e22..24215072d0e 100644 --- a/arch/x86/include/asm/microcode.h +++ b/arch/x86/include/asm/microcode.h @@ -48,6 +48,12 @@ static inline struct microcode_ops * __init init_intel_microcode(void) #ifdef CONFIG_MICROCODE_AMD extern struct microcode_ops * __init init_amd_microcode(void); + +static inline void get_ucode_data(void *to, const u8 *from, size_t n) +{ + memcpy(to, from, n); +} + #else static inline struct microcode_ops * __init init_amd_microcode(void) { diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h index c82868e9f90..0c90dd9f050 100644 --- a/arch/x86/include/asm/mpspec.h +++ b/arch/x86/include/asm/mpspec.h @@ -5,8 +5,9 @@ #include <asm/mpspec_def.h> #include <asm/x86_init.h> +#include <asm/apicdef.h> -extern int apic_version[MAX_APICS]; +extern int apic_version[]; extern int pic_mode; #ifdef CONFIG_X86_32 @@ -107,7 +108,7 @@ extern int mp_register_gsi(struct device *dev, u32 gsi, int edge_level, int active_high_low); #endif /* CONFIG_ACPI */ -#define PHYSID_ARRAY_SIZE BITS_TO_LONGS(MAX_APICS) +#define PHYSID_ARRAY_SIZE BITS_TO_LONGS(MAX_LOCAL_APIC) struct physid_mask { unsigned long mask[PHYSID_ARRAY_SIZE]; @@ -122,31 +123,31 @@ typedef struct physid_mask physid_mask_t; test_and_set_bit(physid, (map).mask) #define physids_and(dst, src1, src2) \ - bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_APICS) + bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_LOCAL_APIC) #define physids_or(dst, src1, src2) \ - bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_APICS) + bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_LOCAL_APIC) #define physids_clear(map) \ - bitmap_zero((map).mask, MAX_APICS) + bitmap_zero((map).mask, MAX_LOCAL_APIC) #define physids_complement(dst, src) \ - bitmap_complement((dst).mask, (src).mask, MAX_APICS) + bitmap_complement((dst).mask, (src).mask, MAX_LOCAL_APIC) #define physids_empty(map) \ - bitmap_empty((map).mask, MAX_APICS) + bitmap_empty((map).mask, MAX_LOCAL_APIC) #define physids_equal(map1, map2) \ - bitmap_equal((map1).mask, (map2).mask, MAX_APICS) + bitmap_equal((map1).mask, (map2).mask, MAX_LOCAL_APIC) #define physids_weight(map) \ - bitmap_weight((map).mask, MAX_APICS) + bitmap_weight((map).mask, MAX_LOCAL_APIC) #define physids_shift_right(d, s, n) \ - bitmap_shift_right((d).mask, (s).mask, n, MAX_APICS) + bitmap_shift_right((d).mask, (s).mask, n, MAX_LOCAL_APIC) #define physids_shift_left(d, s, n) \ - bitmap_shift_left((d).mask, (s).mask, n, MAX_APICS) + bitmap_shift_left((d).mask, (s).mask, n, MAX_LOCAL_APIC) static inline unsigned long physids_coerce(physid_mask_t *map) { @@ -159,14 +160,6 @@ static inline void physids_promote(unsigned long physids, physid_mask_t *map) map->mask[0] = physids; } -/* Note: will create very large stack frames if physid_mask_t is big */ -#define physid_mask_of_physid(physid) \ - ({ \ - physid_mask_t __physid_mask = PHYSID_MASK_NONE; \ - physid_set(physid, __physid_mask); \ - __physid_mask; \ - }) - static inline void physid_set_mask_of_physid(int physid, physid_mask_t *map) { physids_clear(*map); diff --git a/arch/x86/include/asm/mpspec_def.h b/arch/x86/include/asm/mpspec_def.h index 4a7f96d7c18..c0a955a9a08 100644 --- a/arch/x86/include/asm/mpspec_def.h +++ b/arch/x86/include/asm/mpspec_def.h @@ -15,13 +15,6 @@ #ifdef CONFIG_X86_32 # define MAX_MPC_ENTRY 1024 -# define MAX_APICS 256 -#else -# if NR_CPUS <= 255 -# define MAX_APICS 255 -# else -# define MAX_APICS 32768 -# endif #endif /* Intel MP Floating Pointer Structure */ diff --git a/arch/x86/include/asm/mrst-vrtc.h b/arch/x86/include/asm/mrst-vrtc.h new file mode 100644 index 00000000000..73668abdbed --- /dev/null +++ b/arch/x86/include/asm/mrst-vrtc.h @@ -0,0 +1,9 @@ +#ifndef _MRST_VRTC_H +#define _MRST_VRTC_H + +extern unsigned char vrtc_cmos_read(unsigned char reg); +extern void vrtc_cmos_write(unsigned char val, unsigned char reg); +extern unsigned long vrtc_get_time(void); +extern int vrtc_set_mmss(unsigned long nowtime); + +#endif diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h index 4a711a684b1..719f00b28ff 100644 --- a/arch/x86/include/asm/mrst.h +++ b/arch/x86/include/asm/mrst.h @@ -14,7 +14,9 @@ #include <linux/sfi.h> extern int pci_mrst_init(void); -int __init sfi_parse_mrtc(struct sfi_table_header *table); +extern int __init sfi_parse_mrtc(struct sfi_table_header *table); +extern int sfi_mrtc_num; +extern struct sfi_rtc_table_entry sfi_mrtc_array[]; /* * Medfield is the follow-up of Moorestown, it combines two chip solution into @@ -50,4 +52,14 @@ extern void mrst_early_console_init(void); extern struct console early_hsu_console; extern void hsu_early_console_init(void); + +extern void intel_scu_devices_create(void); +extern void intel_scu_devices_destroy(void); + +/* VRTC timer */ +#define MRST_VRTC_MAP_SZ (1024) +/*#define MRST_VRTC_PGOFFSET (0xc00) */ + +extern void mrst_rtc_init(void); + #endif /* _ASM_X86_MRST_H */ diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index 86030f63ba0..4d0dfa0d998 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -257,6 +257,18 @@ #define PACKAGE_THERM_INT_LOW_ENABLE (1 << 1) #define PACKAGE_THERM_INT_PLN_ENABLE (1 << 24) +/* Thermal Thresholds Support */ +#define THERM_INT_THRESHOLD0_ENABLE (1 << 15) +#define THERM_SHIFT_THRESHOLD0 8 +#define THERM_MASK_THRESHOLD0 (0x7f << THERM_SHIFT_THRESHOLD0) +#define THERM_INT_THRESHOLD1_ENABLE (1 << 23) +#define THERM_SHIFT_THRESHOLD1 16 +#define THERM_MASK_THRESHOLD1 (0x7f << THERM_SHIFT_THRESHOLD1) +#define THERM_STATUS_THRESHOLD0 (1 << 6) +#define THERM_LOG_THRESHOLD0 (1 << 7) +#define THERM_STATUS_THRESHOLD1 (1 << 8) +#define THERM_LOG_THRESHOLD1 (1 << 9) + /* MISC_ENABLE bits: architectural */ #define MSR_IA32_MISC_ENABLE_FAST_STRING (1ULL << 0) #define MSR_IA32_MISC_ENABLE_TCC (1ULL << 1) diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h index ef9975812c7..7709c12431b 100644 --- a/arch/x86/include/asm/paravirt.h +++ b/arch/x86/include/asm/paravirt.h @@ -112,7 +112,7 @@ static inline void arch_safe_halt(void) static inline void halt(void) { - PVOP_VCALL0(pv_irq_ops.safe_halt); + PVOP_VCALL0(pv_irq_ops.halt); } static inline void wbinvd(void) diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h index ca0437c714b..67612922963 100644 --- a/arch/x86/include/asm/pci.h +++ b/arch/x86/include/asm/pci.h @@ -65,6 +65,7 @@ extern unsigned long pci_mem_start; #define PCIBIOS_MIN_CARDBUS_IO 0x4000 +extern int pcibios_enabled; void pcibios_config_init(void); struct pci_bus *pcibios_scan_root(int bus); diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h index d6763b139a8..db8aa19a08a 100644 --- a/arch/x86/include/asm/setup.h +++ b/arch/x86/include/asm/setup.h @@ -53,6 +53,12 @@ extern void x86_mrst_early_setup(void); static inline void x86_mrst_early_setup(void) { } #endif +#ifdef CONFIG_X86_INTEL_CE +extern void x86_ce4100_early_setup(void); +#else +static inline void x86_ce4100_early_setup(void) { } +#endif + #ifndef _SETUP /* diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h index 42d412fd8b0..ce1d54c8a43 100644 --- a/arch/x86/include/asm/uv/uv_bau.h +++ b/arch/x86/include/asm/uv/uv_bau.h @@ -26,20 +26,22 @@ * BAU_SB_DESCRIPTOR_BASE register, set 1 is located at BASE + 512, * set 2 is at BASE + 2*512, set 3 at BASE + 3*512, and so on. * - * We will use 31 sets, one for sending BAU messages from each of the 32 + * We will use one set for sending BAU messages from each of the * cpu's on the uvhub. * * TLB shootdown will use the first of the 8 descriptors of each set. * Each of the descriptors is 64 bytes in size (8*64 = 512 bytes in a set). */ +#define MAX_CPUS_PER_UVHUB 64 +#define MAX_CPUS_PER_SOCKET 32 +#define UV_ADP_SIZE 64 /* hardware-provided max. */ +#define UV_CPUS_PER_ACT_STATUS 32 /* hardware-provided max. */ #define UV_ITEMS_PER_DESCRIPTOR 8 /* the 'throttle' to prevent the hardware stay-busy bug */ #define MAX_BAU_CONCURRENT 3 -#define UV_CPUS_PER_ACT_STATUS 32 #define UV_ACT_STATUS_MASK 0x3 #define UV_ACT_STATUS_SIZE 2 -#define UV_ADP_SIZE 32 #define UV_DISTRIBUTION_SIZE 256 #define UV_SW_ACK_NPENDING 8 #define UV_NET_ENDPOINT_INTD 0x38 @@ -100,7 +102,6 @@ * number of destination side software ack resources */ #define DEST_NUM_RESOURCES 8 -#define MAX_CPUS_PER_NODE 32 /* * completion statuses for sending a TLB flush message */ diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 1e994754d32..34244b2cd88 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -85,7 +85,6 @@ obj-$(CONFIG_DOUBLEFAULT) += doublefault_32.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_VM86) += vm86_32.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_EARLY_PRINTK_MRST) += early_printk_mrst.o obj-$(CONFIG_HPET_TIMER) += hpet.o obj-$(CONFIG_APB_TIMER) += apb_timer.o diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 71232b941b6..17c8090fabd 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -198,6 +198,11 @@ static void __cpuinit acpi_register_lapic(int id, u8 enabled) { unsigned int ver = 0; + if (id >= (MAX_LOCAL_APIC-1)) { + printk(KERN_INFO PREFIX "skipped apicid that is too big\n"); + return; + } + if (!enabled) { ++disabled_cpus; return; @@ -910,13 +915,13 @@ static int __init acpi_parse_madt_lapic_entries(void) acpi_register_lapic_address(acpi_lapic_addr); count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC, - acpi_parse_sapic, MAX_APICS); + acpi_parse_sapic, MAX_LOCAL_APIC); if (!count) { x2count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_X2APIC, - acpi_parse_x2apic, MAX_APICS); + acpi_parse_x2apic, MAX_LOCAL_APIC); count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC, - acpi_parse_lapic, MAX_APICS); + acpi_parse_lapic, MAX_LOCAL_APIC); } if (!count && !x2count) { printk(KERN_ERR PREFIX "No LAPIC entries present\n"); diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 553d0b0d639..123608531c8 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -353,6 +353,7 @@ void __init_or_module alternatives_smp_module_del(struct module *mod) mutex_unlock(&smp_alt); } +bool skip_smp_alternatives; void alternatives_smp_switch(int smp) { struct smp_alt_module *mod; @@ -368,7 +369,7 @@ void alternatives_smp_switch(int smp) printk("lockdep: fixing up alternatives.\n"); #endif - if (noreplace_smp || smp_alt_once) + if (noreplace_smp || smp_alt_once || skip_smp_alternatives) return; BUG_ON(!smp && (num_online_cpus() > 1)); diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c index 8f6463d8ed0..affacb5e006 100644 --- a/arch/x86/kernel/amd_nb.c +++ b/arch/x86/kernel/amd_nb.c @@ -12,95 +12,116 @@ static u32 *flush_words; -struct pci_device_id k8_nb_ids[] = { +struct pci_device_id amd_nb_misc_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_MISC) }, {} }; -EXPORT_SYMBOL(k8_nb_ids); +EXPORT_SYMBOL(amd_nb_misc_ids); -struct k8_northbridge_info k8_northbridges; -EXPORT_SYMBOL(k8_northbridges); +struct amd_northbridge_info amd_northbridges; +EXPORT_SYMBOL(amd_northbridges); -static struct pci_dev *next_k8_northbridge(struct pci_dev *dev) +static struct pci_dev *next_northbridge(struct pci_dev *dev, + struct pci_device_id *ids) { do { dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev); if (!dev) break; - } while (!pci_match_id(&k8_nb_ids[0], dev)); + } while (!pci_match_id(ids, dev)); return dev; } -int cache_k8_northbridges(void) +int amd_cache_northbridges(void) { - int i; - struct pci_dev *dev; + int i = 0; + struct amd_northbridge *nb; + struct pci_dev *misc; - if (k8_northbridges.num) + if (amd_nb_num()) return 0; - dev = NULL; - while ((dev = next_k8_northbridge(dev)) != NULL) - k8_northbridges.num++; + misc = NULL; + while ((misc = next_northbridge(misc, amd_nb_misc_ids)) != NULL) + i++; - /* some CPU families (e.g. family 0x11) do not support GART */ - if (boot_cpu_data.x86 == 0xf || boot_cpu_data.x86 == 0x10 || - boot_cpu_data.x86 == 0x15) - k8_northbridges.gart_supported = 1; + if (i == 0) + return 0; - k8_northbridges.nb_misc = kmalloc((k8_northbridges.num + 1) * - sizeof(void *), GFP_KERNEL); - if (!k8_northbridges.nb_misc) + nb = kzalloc(i * sizeof(struct amd_northbridge), GFP_KERNEL); + if (!nb) return -ENOMEM; - if (!k8_northbridges.num) { - k8_northbridges.nb_misc[0] = NULL; - return 0; - } + amd_northbridges.nb = nb; + amd_northbridges.num = i; - if (k8_northbridges.gart_supported) { - flush_words = kmalloc(k8_northbridges.num * sizeof(u32), - GFP_KERNEL); - if (!flush_words) { - kfree(k8_northbridges.nb_misc); - return -ENOMEM; - } - } + misc = NULL; + for (i = 0; i != amd_nb_num(); i++) { + node_to_amd_nb(i)->misc = misc = + next_northbridge(misc, amd_nb_misc_ids); + } + + /* some CPU families (e.g. family 0x11) do not support GART */ + if (boot_cpu_data.x86 == 0xf || boot_cpu_data.x86 == 0x10 || + boot_cpu_data.x86 == 0x15) + amd_northbridges.flags |= AMD_NB_GART; + + /* + * Some CPU families support L3 Cache Index Disable. There are some + * limitations because of E382 and E388 on family 0x10. + */ + if (boot_cpu_data.x86 == 0x10 && + boot_cpu_data.x86_model >= 0x8 && + (boot_cpu_data.x86_model > 0x9 || + boot_cpu_data.x86_mask >= 0x1)) + amd_northbridges.flags |= AMD_NB_L3_INDEX_DISABLE; - dev = NULL; - i = 0; - while ((dev = next_k8_northbridge(dev)) != NULL) { - k8_northbridges.nb_misc[i] = dev; - if (k8_northbridges.gart_supported) - pci_read_config_dword(dev, 0x9c, &flush_words[i++]); - } - k8_northbridges.nb_misc[i] = NULL; return 0; } -EXPORT_SYMBOL_GPL(cache_k8_northbridges); +EXPORT_SYMBOL_GPL(amd_cache_northbridges); /* Ignores subdevice/subvendor but as far as I can figure out they're useless anyways */ -int __init early_is_k8_nb(u32 device) +int __init early_is_amd_nb(u32 device) { struct pci_device_id *id; u32 vendor = device & 0xffff; device >>= 16; - for (id = k8_nb_ids; id->vendor; id++) + for (id = amd_nb_misc_ids; id->vendor; id++) if (vendor == id->vendor && device == id->device) return 1; return 0; } -void k8_flush_garts(void) +int amd_cache_gart(void) +{ + int i; + + if (!amd_nb_has_feature(AMD_NB_GART)) + return 0; + + flush_words = kmalloc(amd_nb_num() * sizeof(u32), GFP_KERNEL); + if (!flush_words) { + amd_northbridges.flags &= ~AMD_NB_GART; + return -ENOMEM; + } + + for (i = 0; i != amd_nb_num(); i++) + pci_read_config_dword(node_to_amd_nb(i)->misc, 0x9c, + &flush_words[i]); + + return 0; +} + +void amd_flush_garts(void) { int flushed, i; unsigned long flags; static DEFINE_SPINLOCK(gart_lock); - if (!k8_northbridges.gart_supported) + if (!amd_nb_has_feature(AMD_NB_GART)) return; /* Avoid races between AGP and IOMMU. In theory it's not needed @@ -109,16 +130,16 @@ void k8_flush_garts(void) that it doesn't matter to serialize more. -AK */ spin_lock_irqsave(&gart_lock, flags); flushed = 0; - for (i = 0; i < k8_northbridges.num; i++) { - pci_write_config_dword(k8_northbridges.nb_misc[i], 0x9c, - flush_words[i]|1); + for (i = 0; i < amd_nb_num(); i++) { + pci_write_config_dword(node_to_amd_nb(i)->misc, 0x9c, + flush_words[i] | 1); flushed++; } - for (i = 0; i < k8_northbridges.num; i++) { + for (i = 0; i < amd_nb_num(); i++) { u32 w; /* Make sure the hardware actually executed the flush*/ for (;;) { - pci_read_config_dword(k8_northbridges.nb_misc[i], + pci_read_config_dword(node_to_amd_nb(i)->misc, 0x9c, &w); if (!(w & 1)) break; @@ -129,19 +150,23 @@ void k8_flush_garts(void) if (!flushed) printk("nothing to flush?\n"); } -EXPORT_SYMBOL_GPL(k8_flush_garts); +EXPORT_SYMBOL_GPL(amd_flush_garts); -static __init int init_k8_nbs(void) +static __init int init_amd_nbs(void) { int err = 0; - err = cache_k8_northbridges(); + err = amd_cache_northbridges(); if (err < 0) - printk(KERN_NOTICE "K8 NB: Cannot enumerate AMD northbridges.\n"); + printk(KERN_NOTICE "AMD NB: Cannot enumerate AMD northbridges.\n"); + + if (amd_cache_gart() < 0) + printk(KERN_NOTICE "AMD NB: Cannot initialize GART flush words, " + "GART support disabled.\n"); return err; } /* This has to go after the PCI subsystem */ -fs_initcall(init_k8_nbs); +fs_initcall(init_amd_nbs); diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c index 92543c73cf8..7c9ab59653e 100644 --- a/arch/x86/kernel/apb_timer.c +++ b/arch/x86/kernel/apb_timer.c @@ -315,6 +315,7 @@ static void apbt_setup_irq(struct apbt_dev *adev) if (system_state == SYSTEM_BOOTING) { irq_modify_status(adev->irq, 0, IRQ_MOVE_PCNTXT); + irq_set_affinity(adev->irq, cpumask_of(adev->cpu)); /* APB timer irqs are set up as mp_irqs, timer is edge type */ __set_irq_handler(adev->irq, handle_edge_irq, 0, "edge"); if (request_irq(adev->irq, apbt_interrupt_handler, diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index b3a16e8f070..dcd7c83e165 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -206,7 +206,7 @@ static u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order) * Do an PCI bus scan by hand because we're running before the PCI * subsystem. * - * All K8 AGP bridges are AGPv3 compliant, so we can do this scan + * All AMD AGP bridges are AGPv3 compliant, so we can do this scan * generically. It's probably overkill to always scan all slots because * the AGP bridges should be always an own bus on the HT hierarchy, * but do it here for future safety. @@ -303,7 +303,7 @@ void __init early_gart_iommu_check(void) dev_limit = bus_dev_ranges[i].dev_limit; for (slot = dev_base; slot < dev_limit; slot++) { - if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + if (!early_is_amd_nb(read_pci_config(bus, slot, 3, 0x00))) continue; ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL); @@ -358,7 +358,7 @@ void __init early_gart_iommu_check(void) dev_limit = bus_dev_ranges[i].dev_limit; for (slot = dev_base; slot < dev_limit; slot++) { - if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + if (!early_is_amd_nb(read_pci_config(bus, slot, 3, 0x00))) continue; ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL); @@ -400,7 +400,7 @@ int __init gart_iommu_hole_init(void) dev_limit = bus_dev_ranges[i].dev_limit; for (slot = dev_base; slot < dev_limit; slot++) { - if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + if (!early_is_amd_nb(read_pci_config(bus, slot, 3, 0x00))) continue; iommu_detected = 1; @@ -518,7 +518,7 @@ out: dev_base = bus_dev_ranges[i].dev_base; dev_limit = bus_dev_ranges[i].dev_limit; for (slot = dev_base; slot < dev_limit; slot++) { - if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + if (!early_is_amd_nb(read_pci_config(bus, slot, 3, 0x00))) continue; write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, ctl); diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index fb7657822aa..879999a5230 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -431,17 +431,18 @@ int setup_APIC_eilvt(u8 offset, u8 vector, u8 msg_type, u8 mask) reserved = reserve_eilvt_offset(offset, new); if (reserved != new) { - pr_err(FW_BUG "cpu %d, try to setup vector 0x%x, but " - "vector 0x%x was already reserved by another core, " - "APIC%lX=0x%x\n", - smp_processor_id(), new, reserved, reg, old); + pr_err(FW_BUG "cpu %d, try to use APIC%lX (LVT offset %d) for " + "vector 0x%x, but the register is already in use for " + "vector 0x%x on another cpu\n", + smp_processor_id(), reg, offset, new, reserved); return -EINVAL; } if (!eilvt_entry_is_changeable(old, new)) { - pr_err(FW_BUG "cpu %d, try to setup vector 0x%x but " - "register already in use, APIC%lX=0x%x\n", - smp_processor_id(), new, reg, old); + pr_err(FW_BUG "cpu %d, try to use APIC%lX (LVT offset %d) for " + "vector 0x%x, but the register is already in use for " + "vector 0x%x on this cpu\n", + smp_processor_id(), reg, offset, new, old); return -EBUSY; } @@ -1532,13 +1533,60 @@ static int __init detect_init_APIC(void) return 0; } #else + +static int apic_verify(void) +{ + u32 features, h, l; + + /* + * The APIC feature bit should now be enabled + * in `cpuid' + */ + features = cpuid_edx(1); + if (!(features & (1 << X86_FEATURE_APIC))) { + pr_warning("Could not enable APIC!\n"); + return -1; + } + set_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC); + mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; + + /* The BIOS may have set up the APIC at some other address */ + rdmsr(MSR_IA32_APICBASE, l, h); + if (l & MSR_IA32_APICBASE_ENABLE) + mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; + + pr_info("Found and enabled local APIC!\n"); + return 0; +} + +int apic_force_enable(void) +{ + u32 h, l; + + if (disable_apic) + return -1; + + /* + * Some BIOSes disable the local APIC in the APIC_BASE + * MSR. This can only be done in software for Intel P6 or later + * and AMD K7 (Model > 1) or later. + */ + rdmsr(MSR_IA32_APICBASE, l, h); + if (!(l & MSR_IA32_APICBASE_ENABLE)) { + pr_info("Local APIC disabled by BIOS -- reenabling.\n"); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE; + wrmsr(MSR_IA32_APICBASE, l, h); + enabled_via_apicbase = 1; + } + return apic_verify(); +} + /* * Detect and initialize APIC */ static int __init detect_init_APIC(void) { - u32 h, l, features; - /* Disabled by kernel option? */ if (disable_apic) return -1; @@ -1568,38 +1616,12 @@ static int __init detect_init_APIC(void) "you can enable it with \"lapic\"\n"); return -1; } - /* - * Some BIOSes disable the local APIC in the APIC_BASE - * MSR. This can only be done in software for Intel P6 or later - * and AMD K7 (Model > 1) or later. - */ - rdmsr(MSR_IA32_APICBASE, l, h); - if (!(l & MSR_IA32_APICBASE_ENABLE)) { - pr_info("Local APIC disabled by BIOS -- reenabling.\n"); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE; - wrmsr(MSR_IA32_APICBASE, l, h); - enabled_via_apicbase = 1; - } - } - /* - * The APIC feature bit should now be enabled - * in `cpuid' - */ - features = cpuid_edx(1); - if (!(features & (1 << X86_FEATURE_APIC))) { - pr_warning("Could not enable APIC!\n"); - return -1; + if (apic_force_enable()) + return -1; + } else { + if (apic_verify()) + return -1; } - set_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC); - mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; - - /* The BIOS may have set up the APIC at some other address */ - rdmsr(MSR_IA32_APICBASE, l, h); - if (l & MSR_IA32_APICBASE_ENABLE) - mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; - - pr_info("Found and enabled local APIC!\n"); apic_pm_activate(); @@ -1687,7 +1709,7 @@ void __init init_apic_mappings(void) * This initializes the IO-APIC and APIC hardware if this is * a UP kernel. */ -int apic_version[MAX_APICS]; +int apic_version[MAX_LOCAL_APIC]; int __init APIC_init_uniprocessor(void) { diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 16c2db8750a..f6cd5b41077 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1933,8 +1933,7 @@ void disable_IO_APIC(void) * * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999 */ - -void __init setup_ioapic_ids_from_mpc(void) +void __init setup_ioapic_ids_from_mpc_nocheck(void) { union IO_APIC_reg_00 reg_00; physid_mask_t phys_id_present_map; @@ -1943,15 +1942,6 @@ void __init setup_ioapic_ids_from_mpc(void) unsigned char old_id; unsigned long flags; - if (acpi_ioapic) - return; - /* - * Don't check I/O APIC IDs for xAPIC systems. They have - * no meaning without the serial APIC bus. - */ - if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) - || APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) - return; /* * This is broken; anything with a real cpu count has to * circumvent this idiocy regardless. @@ -2005,7 +1995,6 @@ void __init setup_ioapic_ids_from_mpc(void) physids_or(phys_id_present_map, phys_id_present_map, tmp); } - /* * We need to adjust the IRQ routing table * if the ID changed. @@ -2041,6 +2030,21 @@ void __init setup_ioapic_ids_from_mpc(void) apic_printk(APIC_VERBOSE, " ok.\n"); } } + +void __init setup_ioapic_ids_from_mpc(void) +{ + + if (acpi_ioapic) + return; + /* + * Don't check I/O APIC IDs for xAPIC systems. They have + * no meaning without the serial APIC bus. + */ + if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) + || APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) + return; + setup_ioapic_ids_from_mpc_nocheck(); +} #endif int no_timer_check __initdata; @@ -3593,7 +3597,7 @@ int __init io_apic_get_redir_entries (int ioapic) return reg_01.bits.entries + 1; } -void __init probe_nr_irqs_gsi(void) +static void __init probe_nr_irqs_gsi(void) { int nr; @@ -3910,7 +3914,7 @@ static struct resource * __init ioapic_setup_resources(int nr_ioapics) return res; } -void __init ioapic_init_mappings(void) +void __init ioapic_and_gsi_init(void) { unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; struct resource *ioapic_res; @@ -3948,6 +3952,8 @@ fake_ioapic_page: ioapic_res->end = ioapic_phys + IO_APIC_SLOT_SIZE - 1; ioapic_res++; } + + probe_nr_irqs_gsi(); } void __init ioapic_insert_resources(void) @@ -4057,7 +4063,8 @@ void __init pre_init_apic_IRQ0(void) printk(KERN_INFO "Early APIC setup for system timer0\n"); #ifndef CONFIG_SMP - phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid); + physid_set_mask_of_physid(boot_cpu_physical_apicid, + &phys_cpu_present_map); #endif /* Make sure the irq descriptor is set up */ cfg = alloc_irq_and_cfg_at(0, 0); diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 927902d90fe..936613e7711 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -48,6 +48,16 @@ unsigned int uv_apicid_hibits; EXPORT_SYMBOL_GPL(uv_apicid_hibits); static DEFINE_SPINLOCK(uv_nmi_lock); +static unsigned long __init uv_early_read_mmr(unsigned long addr) +{ + unsigned long val, *mmr; + + mmr = early_ioremap(UV_LOCAL_MMR_BASE | addr, sizeof(*mmr)); + val = *mmr; + early_iounmap(mmr, sizeof(*mmr)); + return val; +} + static inline bool is_GRU_range(u64 start, u64 end) { return start >= gru_start_paddr && end <= gru_end_paddr; @@ -58,28 +68,24 @@ static bool uv_is_untracked_pat_range(u64 start, u64 end) return is_ISA_range(start, end) || is_GRU_range(start, end); } -static int early_get_nodeid(void) +static int __init early_get_pnodeid(void) { union uvh_node_id_u node_id; - unsigned long *mmr; - - mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_NODE_ID, sizeof(*mmr)); - node_id.v = *mmr; - early_iounmap(mmr, sizeof(*mmr)); + union uvh_rh_gam_config_mmr_u m_n_config; + int pnode; /* Currently, all blades have same revision number */ + node_id.v = uv_early_read_mmr(UVH_NODE_ID); + m_n_config.v = uv_early_read_mmr(UVH_RH_GAM_CONFIG_MMR); uv_min_hub_revision_id = node_id.s.revision; - return node_id.s.node_id; + pnode = (node_id.s.node_id >> 1) & ((1 << m_n_config.s.n_skt) - 1); + return pnode; } static void __init early_get_apic_pnode_shift(void) { - unsigned long *mmr; - - mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_APICID, sizeof(*mmr)); - uvh_apicid.v = *mmr; - early_iounmap(mmr, sizeof(*mmr)); + uvh_apicid.v = uv_early_read_mmr(UVH_APICID); if (!uvh_apicid.v) /* * Old bios, use default value @@ -95,21 +101,17 @@ static void __init early_get_apic_pnode_shift(void) static void __init uv_set_apicid_hibit(void) { union uvh_lb_target_physical_apic_id_mask_u apicid_mask; - unsigned long *mmr; - mmr = early_ioremap(UV_LOCAL_MMR_BASE | - UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK, sizeof(*mmr)); - apicid_mask.v = *mmr; - early_iounmap(mmr, sizeof(*mmr)); + apicid_mask.v = uv_early_read_mmr(UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK); uv_apicid_hibits = apicid_mask.s.bit_enables & UV_APICID_HIBIT_MASK; } static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { - int nodeid; + int pnodeid; if (!strcmp(oem_id, "SGI")) { - nodeid = early_get_nodeid(); + pnodeid = early_get_pnodeid(); early_get_apic_pnode_shift(); x86_platform.is_untracked_pat_range = uv_is_untracked_pat_range; x86_platform.nmi_init = uv_nmi_init; @@ -119,7 +121,7 @@ static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) uv_system_type = UV_X2APIC; else if (!strcmp(oem_table_id, "UVH")) { __get_cpu_var(x2apic_extra_bits) = - nodeid << (uvh_apicid.s.pnode_shift - 1); + pnodeid << uvh_apicid.s.pnode_shift; uv_system_type = UV_NON_UNIQUE_APIC; uv_set_apicid_hibit(); return 1; @@ -682,27 +684,32 @@ void uv_nmi_init(void) void __init uv_system_init(void) { union uvh_rh_gam_config_mmr_u m_n_config; + union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh; union uvh_node_id_u node_id; unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size; - int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val; + int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val, n_io; int gnode_extra, max_pnode = 0; unsigned long mmr_base, present, paddr; - unsigned short pnode_mask; + unsigned short pnode_mask, pnode_io_mask; map_low_mmrs(); m_n_config.v = uv_read_local_mmr(UVH_RH_GAM_CONFIG_MMR ); m_val = m_n_config.s.m_skt; n_val = m_n_config.s.n_skt; + mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR); + n_io = mmioh.s.n_io; mmr_base = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) & ~UV_MMR_ENABLE; pnode_mask = (1 << n_val) - 1; + pnode_io_mask = (1 << n_io) - 1; + node_id.v = uv_read_local_mmr(UVH_NODE_ID); gnode_extra = (node_id.s.node_id & ~((1 << n_val) - 1)) >> 1; gnode_upper = ((unsigned long)gnode_extra << m_val); - printk(KERN_DEBUG "UV: N %d, M %d, gnode_upper 0x%lx, gnode_extra 0x%x\n", - n_val, m_val, gnode_upper, gnode_extra); + printk(KERN_INFO "UV: N %d, M %d, N_IO: %d, gnode_upper 0x%lx, gnode_extra 0x%x, pnode_mask 0x%x, pnode_io_mask 0x%x\n", + n_val, m_val, n_io, gnode_upper, gnode_extra, pnode_mask, pnode_io_mask); printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base); @@ -735,7 +742,7 @@ void __init uv_system_init(void) for (j = 0; j < 64; j++) { if (!test_bit(j, &present)) continue; - pnode = (i * 64 + j); + pnode = (i * 64 + j) & pnode_mask; uv_blade_info[blade].pnode = pnode; uv_blade_info[blade].nr_possible_cpus = 0; uv_blade_info[blade].nr_online_cpus = 0; @@ -756,6 +763,7 @@ void __init uv_system_init(void) /* * apic_pnode_shift must be set before calling uv_apicid_to_pnode(); */ + uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask; uv_cpu_hub_info(cpu)->apic_pnode_shift = uvh_apicid.s.pnode_shift; pnode = uv_apicid_to_pnode(apicid); blade = boot_pnode_to_blade(pnode); @@ -772,7 +780,6 @@ void __init uv_system_init(void) uv_cpu_hub_info(cpu)->numa_blade_id = blade; uv_cpu_hub_info(cpu)->blade_processor_id = lcpu; uv_cpu_hub_info(cpu)->pnode = pnode; - uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask; uv_cpu_hub_info(cpu)->gpa_mask = (1UL << (m_val + n_val)) - 1; uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper; uv_cpu_hub_info(cpu)->gnode_extra = gnode_extra; @@ -796,7 +803,7 @@ void __init uv_system_init(void) map_gru_high(max_pnode); map_mmr_high(max_pnode); - map_mmioh_high(max_pnode); + map_mmioh_high(max_pnode & pnode_io_mask); uv_cpu_init(); uv_scir_register_cpu_notifier(); diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 17ad0336621..9ecf81f9b90 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -149,8 +149,7 @@ union _cpuid4_leaf_ecx { }; struct amd_l3_cache { - struct pci_dev *dev; - bool can_disable; + struct amd_northbridge *nb; unsigned indices; u8 subcaches[4]; }; @@ -311,14 +310,12 @@ struct _cache_attr { /* * L3 cache descriptors */ -static struct amd_l3_cache **__cpuinitdata l3_caches; - static void __cpuinit amd_calc_l3_indices(struct amd_l3_cache *l3) { unsigned int sc0, sc1, sc2, sc3; u32 val = 0; - pci_read_config_dword(l3->dev, 0x1C4, &val); + pci_read_config_dword(l3->nb->misc, 0x1C4, &val); /* calculate subcache sizes */ l3->subcaches[0] = sc0 = !(val & BIT(0)); @@ -330,47 +327,14 @@ static void __cpuinit amd_calc_l3_indices(struct amd_l3_cache *l3) l3->indices = (max(max3(sc0, sc1, sc2), sc3) << 10) - 1; } -static struct amd_l3_cache * __cpuinit amd_init_l3_cache(int node) -{ - struct amd_l3_cache *l3; - struct pci_dev *dev = node_to_k8_nb_misc(node); - - l3 = kzalloc(sizeof(struct amd_l3_cache), GFP_ATOMIC); - if (!l3) { - printk(KERN_WARNING "Error allocating L3 struct\n"); - return NULL; - } - - l3->dev = dev; - - amd_calc_l3_indices(l3); - - return l3; -} - -static void __cpuinit amd_check_l3_disable(struct _cpuid4_info_regs *this_leaf, - int index) +static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf, + int index) { + static struct amd_l3_cache *__cpuinitdata l3_caches; int node; - if (boot_cpu_data.x86 != 0x10) - return; - - if (index < 3) - return; - - /* see errata #382 and #388 */ - if (boot_cpu_data.x86_model < 0x8) - return; - - if ((boot_cpu_data.x86_model == 0x8 || - boot_cpu_data.x86_model == 0x9) - && - boot_cpu_data.x86_mask < 0x1) - return; - - /* not in virtualized environments */ - if (k8_northbridges.num == 0) + /* only for L3, and not in virtualized environments */ + if (index < 3 || amd_nb_num() == 0) return; /* @@ -378,7 +342,7 @@ static void __cpuinit amd_check_l3_disable(struct _cpuid4_info_regs *this_leaf, * never freed but this is done only on shutdown so it doesn't matter. */ if (!l3_caches) { - int size = k8_northbridges.num * sizeof(struct amd_l3_cache *); + int size = amd_nb_num() * sizeof(struct amd_l3_cache); l3_caches = kzalloc(size, GFP_ATOMIC); if (!l3_caches) @@ -387,14 +351,12 @@ static void __cpuinit amd_check_l3_disable(struct _cpuid4_info_regs *this_leaf, node = amd_get_nb_id(smp_processor_id()); - if (!l3_caches[node]) { - l3_caches[node] = amd_init_l3_cache(node); - l3_caches[node]->can_disable = true; + if (!l3_caches[node].nb) { + l3_caches[node].nb = node_to_amd_nb(node); + amd_calc_l3_indices(&l3_caches[node]); } - WARN_ON(!l3_caches[node]); - - this_leaf->l3 = l3_caches[node]; + this_leaf->l3 = &l3_caches[node]; } /* @@ -408,7 +370,7 @@ int amd_get_l3_disable_slot(struct amd_l3_cache *l3, unsigned slot) { unsigned int reg = 0; - pci_read_config_dword(l3->dev, 0x1BC + slot * 4, ®); + pci_read_config_dword(l3->nb->misc, 0x1BC + slot * 4, ®); /* check whether this slot is activated already */ if (reg & (3UL << 30)) @@ -422,7 +384,8 @@ static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf, { int index; - if (!this_leaf->l3 || !this_leaf->l3->can_disable) + if (!this_leaf->l3 || + !amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE)) return -EINVAL; index = amd_get_l3_disable_slot(this_leaf->l3, slot); @@ -457,7 +420,7 @@ static void amd_l3_disable_index(struct amd_l3_cache *l3, int cpu, if (!l3->subcaches[i]) continue; - pci_write_config_dword(l3->dev, 0x1BC + slot * 4, reg); + pci_write_config_dword(l3->nb->misc, 0x1BC + slot * 4, reg); /* * We need to WBINVD on a core on the node containing the L3 @@ -467,7 +430,7 @@ static void amd_l3_disable_index(struct amd_l3_cache *l3, int cpu, wbinvd_on_cpu(cpu); reg |= BIT(31); - pci_write_config_dword(l3->dev, 0x1BC + slot * 4, reg); + pci_write_config_dword(l3->nb->misc, 0x1BC + slot * 4, reg); } } @@ -524,7 +487,8 @@ static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf, if (!capable(CAP_SYS_ADMIN)) return -EPERM; - if (!this_leaf->l3 || !this_leaf->l3->can_disable) + if (!this_leaf->l3 || + !amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE)) return -EINVAL; cpu = cpumask_first(to_cpumask(this_leaf->shared_cpu_map)); @@ -545,7 +509,7 @@ static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf, #define STORE_CACHE_DISABLE(slot) \ static ssize_t \ store_cache_disable_##slot(struct _cpuid4_info *this_leaf, \ - const char *buf, size_t count) \ + const char *buf, size_t count) \ { \ return store_cache_disable(this_leaf, buf, count, slot); \ } @@ -558,10 +522,7 @@ static struct _cache_attr cache_disable_1 = __ATTR(cache_disable_1, 0644, show_cache_disable_1, store_cache_disable_1); #else /* CONFIG_AMD_NB */ -static void __cpuinit -amd_check_l3_disable(struct _cpuid4_info_regs *this_leaf, int index) -{ -}; +#define amd_init_l3_cache(x, y) #endif /* CONFIG_AMD_NB */ static int @@ -575,7 +536,7 @@ __cpuinit cpuid4_cache_lookup_regs(int index, if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) { amd_cpuid4(index, &eax, &ebx, &ecx); - amd_check_l3_disable(this_leaf, index); + amd_init_l3_cache(this_leaf, index); } else { cpuid_count(4, index, &eax.full, &ebx.full, &ecx.full, &edx); } @@ -983,30 +944,48 @@ define_one_ro(size); define_one_ro(shared_cpu_map); define_one_ro(shared_cpu_list); -#define DEFAULT_SYSFS_CACHE_ATTRS \ - &type.attr, \ - &level.attr, \ - &coherency_line_size.attr, \ - &physical_line_partition.attr, \ - &ways_of_associativity.attr, \ - &number_of_sets.attr, \ - &size.attr, \ - &shared_cpu_map.attr, \ - &shared_cpu_list.attr - static struct attribute *default_attrs[] = { - DEFAULT_SYSFS_CACHE_ATTRS, + &type.attr, + &level.attr, + &coherency_line_size.attr, + &physical_line_partition.attr, + &ways_of_associativity.attr, + &number_of_sets.attr, + &size.attr, + &shared_cpu_map.attr, + &shared_cpu_list.attr, NULL }; -static struct attribute *default_l3_attrs[] = { - DEFAULT_SYSFS_CACHE_ATTRS, #ifdef CONFIG_AMD_NB - &cache_disable_0.attr, - &cache_disable_1.attr, +static struct attribute ** __cpuinit amd_l3_attrs(void) +{ + static struct attribute **attrs; + int n; + + if (attrs) + return attrs; + + n = sizeof (default_attrs) / sizeof (struct attribute *); + + if (amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE)) + n += 2; + + attrs = kzalloc(n * sizeof (struct attribute *), GFP_KERNEL); + if (attrs == NULL) + return attrs = default_attrs; + + for (n = 0; default_attrs[n]; n++) + attrs[n] = default_attrs[n]; + + if (amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE)) { + attrs[n++] = &cache_disable_0.attr; + attrs[n++] = &cache_disable_1.attr; + } + + return attrs; +} #endif - NULL -}; static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf) { @@ -1117,11 +1096,11 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev) this_leaf = CPUID4_INFO_IDX(cpu, i); - if (this_leaf->l3 && this_leaf->l3->can_disable) - ktype_cache.default_attrs = default_l3_attrs; - else - ktype_cache.default_attrs = default_attrs; - + ktype_cache.default_attrs = default_attrs; +#ifdef CONFIG_AMD_NB + if (this_leaf->l3) + ktype_cache.default_attrs = amd_l3_attrs(); +#endif retval = kobject_init_and_add(&(this_object->kobj), &ktype_cache, per_cpu(ici_cache_kobject, cpu), diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c index 80c482382d5..5bf2fac52ac 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c @@ -31,8 +31,6 @@ #include <asm/mce.h> #include <asm/msr.h> -#define PFX "mce_threshold: " -#define VERSION "version 1.1.1" #define NR_BANKS 6 #define NR_BLOCKS 9 #define THRESHOLD_MAX 0xFFF @@ -59,12 +57,6 @@ struct threshold_block { struct list_head miscj; }; -/* defaults used early on boot */ -static struct threshold_block threshold_defaults = { - .interrupt_enable = 0, - .threshold_limit = THRESHOLD_MAX, -}; - struct threshold_bank { struct kobject *kobj; struct threshold_block *blocks; @@ -89,50 +81,101 @@ static void amd_threshold_interrupt(void); struct thresh_restart { struct threshold_block *b; int reset; + int set_lvt_off; + int lvt_off; u16 old_limit; }; +static int lvt_off_valid(struct threshold_block *b, int apic, u32 lo, u32 hi) +{ + int msr = (hi & MASK_LVTOFF_HI) >> 20; + + if (apic < 0) { + pr_err(FW_BUG "cpu %d, failed to setup threshold interrupt " + "for bank %d, block %d (MSR%08X=0x%x%08x)\n", b->cpu, + b->bank, b->block, b->address, hi, lo); + return 0; + } + + if (apic != msr) { + pr_err(FW_BUG "cpu %d, invalid threshold interrupt offset %d " + "for bank %d, block %d (MSR%08X=0x%x%08x)\n", + b->cpu, apic, b->bank, b->block, b->address, hi, lo); + return 0; + } + + return 1; +}; + /* must be called with correct cpu affinity */ /* Called via smp_call_function_single() */ static void threshold_restart_bank(void *_tr) { struct thresh_restart *tr = _tr; - u32 mci_misc_hi, mci_misc_lo; + u32 hi, lo; - rdmsr(tr->b->address, mci_misc_lo, mci_misc_hi); + rdmsr(tr->b->address, lo, hi); - if (tr->b->threshold_limit < (mci_misc_hi & THRESHOLD_MAX)) + if (tr->b->threshold_limit < (hi & THRESHOLD_MAX)) tr->reset = 1; /* limit cannot be lower than err count */ if (tr->reset) { /* reset err count and overflow bit */ - mci_misc_hi = - (mci_misc_hi & ~(MASK_ERR_COUNT_HI | MASK_OVERFLOW_HI)) | + hi = + (hi & ~(MASK_ERR_COUNT_HI | MASK_OVERFLOW_HI)) | (THRESHOLD_MAX - tr->b->threshold_limit); } else if (tr->old_limit) { /* change limit w/o reset */ - int new_count = (mci_misc_hi & THRESHOLD_MAX) + + int new_count = (hi & THRESHOLD_MAX) + (tr->old_limit - tr->b->threshold_limit); - mci_misc_hi = (mci_misc_hi & ~MASK_ERR_COUNT_HI) | + hi = (hi & ~MASK_ERR_COUNT_HI) | (new_count & THRESHOLD_MAX); } + if (tr->set_lvt_off) { + if (lvt_off_valid(tr->b, tr->lvt_off, lo, hi)) { + /* set new lvt offset */ + hi &= ~MASK_LVTOFF_HI; + hi |= tr->lvt_off << 20; + } + } + tr->b->interrupt_enable ? - (mci_misc_hi = (mci_misc_hi & ~MASK_INT_TYPE_HI) | INT_TYPE_APIC) : - (mci_misc_hi &= ~MASK_INT_TYPE_HI); + (hi = (hi & ~MASK_INT_TYPE_HI) | INT_TYPE_APIC) : + (hi &= ~MASK_INT_TYPE_HI); - mci_misc_hi |= MASK_COUNT_EN_HI; - wrmsr(tr->b->address, mci_misc_lo, mci_misc_hi); + hi |= MASK_COUNT_EN_HI; + wrmsr(tr->b->address, lo, hi); +} + +static void mce_threshold_block_init(struct threshold_block *b, int offset) +{ + struct thresh_restart tr = { + .b = b, + .set_lvt_off = 1, + .lvt_off = offset, + }; + + b->threshold_limit = THRESHOLD_MAX; + threshold_restart_bank(&tr); +}; + +static int setup_APIC_mce(int reserved, int new) +{ + if (reserved < 0 && !setup_APIC_eilvt(new, THRESHOLD_APIC_VECTOR, + APIC_EILVT_MSG_FIX, 0)) + return new; + + return reserved; } /* cpu init entry point, called from mce.c with preempt off */ void mce_amd_feature_init(struct cpuinfo_x86 *c) { + struct threshold_block b; unsigned int cpu = smp_processor_id(); u32 low = 0, high = 0, address = 0; unsigned int bank, block; - struct thresh_restart tr; - int lvt_off = -1; - u8 offset; + int offset = -1; for (bank = 0; bank < NR_BANKS; ++bank) { for (block = 0; block < NR_BLOCKS; ++block) { @@ -163,39 +206,16 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c) if (shared_bank[bank] && c->cpu_core_id) break; #endif - offset = (high & MASK_LVTOFF_HI) >> 20; - if (lvt_off < 0) { - if (setup_APIC_eilvt(offset, - THRESHOLD_APIC_VECTOR, - APIC_EILVT_MSG_FIX, 0)) { - pr_err(FW_BUG "cpu %d, failed to " - "setup threshold interrupt " - "for bank %d, block %d " - "(MSR%08X=0x%x%08x)", - smp_processor_id(), bank, block, - address, high, low); - continue; - } - lvt_off = offset; - } else if (lvt_off != offset) { - pr_err(FW_BUG "cpu %d, invalid threshold " - "interrupt offset %d for bank %d," - "block %d (MSR%08X=0x%x%08x)", - smp_processor_id(), lvt_off, bank, - block, address, high, low); - continue; - } - - high &= ~MASK_LVTOFF_HI; - high |= lvt_off << 20; - wrmsr(address, low, high); + offset = setup_APIC_mce(offset, + (high & MASK_LVTOFF_HI) >> 20); - threshold_defaults.address = address; - tr.b = &threshold_defaults; - tr.reset = 0; - tr.old_limit = 0; - threshold_restart_bank(&tr); + memset(&b, 0, sizeof(b)); + b.cpu = cpu; + b.bank = bank; + b.block = block; + b.address = address; + mce_threshold_block_init(&b, offset); mce_threshold_vector = amd_threshold_interrupt; } } @@ -298,9 +318,8 @@ store_interrupt_enable(struct threshold_block *b, const char *buf, size_t size) b->interrupt_enable = !!new; + memset(&tr, 0, sizeof(tr)); tr.b = b; - tr.reset = 0; - tr.old_limit = 0; smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1); @@ -321,10 +340,10 @@ store_threshold_limit(struct threshold_block *b, const char *buf, size_t size) if (new < 1) new = 1; + memset(&tr, 0, sizeof(tr)); tr.old_limit = b->threshold_limit; b->threshold_limit = new; tr.b = b; - tr.reset = 0; smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1); @@ -603,9 +622,9 @@ static __cpuinit int threshold_create_device(unsigned int cpu) continue; err = threshold_create_bank(cpu, bank); if (err) - goto out; + return err; } -out: + return err; } diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index 4b683267eca..e12246ff5aa 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -53,8 +53,13 @@ struct thermal_state { struct _thermal_state core_power_limit; struct _thermal_state package_throttle; struct _thermal_state package_power_limit; + struct _thermal_state core_thresh0; + struct _thermal_state core_thresh1; }; +/* Callback to handle core threshold interrupts */ +int (*platform_thermal_notify)(__u64 msr_val); + static DEFINE_PER_CPU(struct thermal_state, thermal_state); static atomic_t therm_throt_en = ATOMIC_INIT(0); @@ -200,6 +205,22 @@ static int therm_throt_process(bool new_event, int event, int level) return 0; } +static int thresh_event_valid(int event) +{ + struct _thermal_state *state; + unsigned int this_cpu = smp_processor_id(); + struct thermal_state *pstate = &per_cpu(thermal_state, this_cpu); + u64 now = get_jiffies_64(); + + state = (event == 0) ? &pstate->core_thresh0 : &pstate->core_thresh1; + + if (time_before64(now, state->next_check)) + return 0; + + state->next_check = now + CHECK_INTERVAL; + return 1; +} + #ifdef CONFIG_SYSFS /* Add/Remove thermal_throttle interface for CPU device: */ static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev, @@ -313,6 +334,22 @@ device_initcall(thermal_throttle_init_device); #define PACKAGE_THROTTLED ((__u64)2 << 62) #define PACKAGE_POWER_LIMIT ((__u64)3 << 62) +static void notify_thresholds(__u64 msr_val) +{ + /* check whether the interrupt handler is defined; + * otherwise simply return + */ + if (!platform_thermal_notify) + return; + + /* lower threshold reached */ + if ((msr_val & THERM_LOG_THRESHOLD0) && thresh_event_valid(0)) + platform_thermal_notify(msr_val); + /* higher threshold reached */ + if ((msr_val & THERM_LOG_THRESHOLD1) && thresh_event_valid(1)) + platform_thermal_notify(msr_val); +} + /* Thermal transition interrupt handler */ static void intel_thermal_interrupt(void) { @@ -321,6 +358,9 @@ static void intel_thermal_interrupt(void) rdmsrl(MSR_IA32_THERM_STATUS, msr_val); + /* Check for violation of core thermal thresholds*/ + notify_thresholds(msr_val); + if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT, THERMAL_THROTTLING_EVENT, CORE_LEVEL) != 0) diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c index 4572f25f932..cd28a350f7f 100644 --- a/arch/x86/kernel/early_printk.c +++ b/arch/x86/kernel/early_printk.c @@ -240,7 +240,7 @@ static int __init setup_early_printk(char *buf) if (!strncmp(buf, "xen", 3)) early_console_register(&xenboot_console, keep); #endif -#ifdef CONFIG_X86_MRST_EARLY_PRINTK +#ifdef CONFIG_EARLY_PRINTK_MRST if (!strncmp(buf, "mrst", 4)) { mrst_early_console_init(); early_console_register(&early_mrst_console, keep); @@ -250,7 +250,6 @@ static int __init setup_early_printk(char *buf) hsu_early_console_init(); early_console_register(&early_hsu_console, keep); } - #endif buf++; } diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 3afb33f14d2..298448656b6 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -19,6 +19,7 @@ #include <linux/sched.h> #include <linux/init.h> #include <linux/list.h> +#include <linux/module.h> #include <trace/syscall.h> @@ -49,6 +50,7 @@ static DEFINE_PER_CPU(int, save_modifying_code); int ftrace_arch_code_modify_prepare(void) { set_kernel_text_rw(); + set_all_modules_text_rw(); modifying_code = 1; return 0; } @@ -56,6 +58,7 @@ int ftrace_arch_code_modify_prepare(void) int ftrace_arch_code_modify_post_process(void) { modifying_code = 0; + set_all_modules_text_ro(); set_kernel_text_ro(); return 0; } diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index 763310165fa..7f138b3c3c5 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -61,6 +61,9 @@ void __init i386_start_kernel(void) case X86_SUBARCH_MRST: x86_mrst_early_setup(); break; + case X86_SUBARCH_CE4100: + x86_ce4100_early_setup(); + break; default: i386_default_early_setup(); break; diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index c0dbd9ac24f..9f54b209c37 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -139,39 +139,6 @@ ENTRY(startup_32) movl %eax, pa(olpc_ofw_pgd) #endif -#ifdef CONFIG_PARAVIRT - /* This is can only trip for a broken bootloader... */ - cmpw $0x207, pa(boot_params + BP_version) - jb default_entry - - /* Paravirt-compatible boot parameters. Look to see what architecture - we're booting under. */ - movl pa(boot_params + BP_hardware_subarch), %eax - cmpl $num_subarch_entries, %eax - jae bad_subarch - - movl pa(subarch_entries)(,%eax,4), %eax - subl $__PAGE_OFFSET, %eax - jmp *%eax - -bad_subarch: -WEAK(lguest_entry) -WEAK(xen_entry) - /* Unknown implementation; there's really - nothing we can do at this point. */ - ud2a - - __INITDATA - -subarch_entries: - .long default_entry /* normal x86/PC */ - .long lguest_entry /* lguest hypervisor */ - .long xen_entry /* Xen hypervisor */ - .long default_entry /* Moorestown MID */ -num_subarch_entries = (. - subarch_entries) / 4 -.previous -#endif /* CONFIG_PARAVIRT */ - /* * Initialize page tables. This creates a PDE and a set of page * tables, which are located immediately beyond __brk_base. The variable @@ -181,7 +148,6 @@ num_subarch_entries = (. - subarch_entries) / 4 * * Note that the stack is not yet set up! */ -default_entry: #ifdef CONFIG_X86_PAE /* @@ -261,7 +227,42 @@ page_pde_offset = (__PAGE_OFFSET >> 20); movl $pa(initial_pg_fixmap)+PDE_IDENT_ATTR,%eax movl %eax,pa(initial_page_table+0xffc) #endif - jmp 3f + +#ifdef CONFIG_PARAVIRT + /* This is can only trip for a broken bootloader... */ + cmpw $0x207, pa(boot_params + BP_version) + jb default_entry + + /* Paravirt-compatible boot parameters. Look to see what architecture + we're booting under. */ + movl pa(boot_params + BP_hardware_subarch), %eax + cmpl $num_subarch_entries, %eax + jae bad_subarch + + movl pa(subarch_entries)(,%eax,4), %eax + subl $__PAGE_OFFSET, %eax + jmp *%eax + +bad_subarch: +WEAK(lguest_entry) +WEAK(xen_entry) + /* Unknown implementation; there's really + nothing we can do at this point. */ + ud2a + + __INITDATA + +subarch_entries: + .long default_entry /* normal x86/PC */ + .long lguest_entry /* lguest hypervisor */ + .long xen_entry /* Xen hypervisor */ + .long default_entry /* Moorestown MID */ +num_subarch_entries = (. - subarch_entries) / 4 +.previous +#else + jmp default_entry +#endif /* CONFIG_PARAVIRT */ + /* * Non-boot CPU entry point; entered from trampoline.S * We can't lgdt here, because lgdt itself uses a data segment, but @@ -282,7 +283,7 @@ ENTRY(startup_32_smp) movl %eax,%fs movl %eax,%gs #endif /* CONFIG_SMP */ -3: +default_entry: /* * New page tables may be in 4Mbyte page mode and may @@ -316,6 +317,10 @@ ENTRY(startup_32_smp) subl $0x80000001, %eax cmpl $(0x8000ffff-0x80000001), %eax ja 6f + + /* Clear bogus XD_DISABLE bits */ + call verify_cpu + mov $0x80000001, %eax cpuid /* Execute Disable bit supported? */ @@ -611,6 +616,8 @@ ignore_int: #endif iret +#include "verify_cpu.S" + __REFDATA .align 4 ENTRY(initial_code) @@ -622,13 +629,13 @@ ENTRY(initial_code) __PAGE_ALIGNED_BSS .align PAGE_SIZE_asm #ifdef CONFIG_X86_PAE -ENTRY(initial_pg_pmd) +initial_pg_pmd: .fill 1024*KPMDS,4,0 #else ENTRY(initial_page_table) .fill 1024,4,0 #endif -ENTRY(initial_pg_fixmap) +initial_pg_fixmap: .fill 1024,4,0 ENTRY(empty_zero_page) .fill 4096,1,0 diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index ce0cb4721c9..0fe6d1a66c3 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -155,12 +155,6 @@ static int apply_microcode_amd(int cpu) return 0; } -static int get_ucode_data(void *to, const u8 *from, size_t n) -{ - memcpy(to, from, n); - return 0; -} - static void * get_next_ucode(const u8 *buf, unsigned int size, unsigned int *mc_size) { @@ -168,8 +162,7 @@ get_next_ucode(const u8 *buf, unsigned int size, unsigned int *mc_size) u8 section_hdr[UCODE_CONTAINER_SECTION_HDR]; void *mc; - if (get_ucode_data(section_hdr, buf, UCODE_CONTAINER_SECTION_HDR)) - return NULL; + get_ucode_data(section_hdr, buf, UCODE_CONTAINER_SECTION_HDR); if (section_hdr[0] != UCODE_UCODE_TYPE) { pr_err("error: invalid type field in container file section header\n"); @@ -183,16 +176,13 @@ get_next_ucode(const u8 *buf, unsigned int size, unsigned int *mc_size) return NULL; } - mc = vmalloc(UCODE_MAX_SIZE); - if (mc) { - memset(mc, 0, UCODE_MAX_SIZE); - if (get_ucode_data(mc, buf + UCODE_CONTAINER_SECTION_HDR, - total_size)) { - vfree(mc); - mc = NULL; - } else - *mc_size = total_size + UCODE_CONTAINER_SECTION_HDR; - } + mc = vzalloc(UCODE_MAX_SIZE); + if (!mc) + return NULL; + + get_ucode_data(mc, buf + UCODE_CONTAINER_SECTION_HDR, total_size); + *mc_size = total_size + UCODE_CONTAINER_SECTION_HDR; + return mc; } @@ -202,8 +192,7 @@ static int install_equiv_cpu_table(const u8 *buf) unsigned int *buf_pos = (unsigned int *)container_hdr; unsigned long size; - if (get_ucode_data(&container_hdr, buf, UCODE_CONTAINER_HEADER_SIZE)) - return 0; + get_ucode_data(&container_hdr, buf, UCODE_CONTAINER_HEADER_SIZE); size = buf_pos[2]; @@ -219,10 +208,7 @@ static int install_equiv_cpu_table(const u8 *buf) } buf += UCODE_CONTAINER_HEADER_SIZE; - if (get_ucode_data(equiv_cpu_table, buf, size)) { - vfree(equiv_cpu_table); - return 0; - } + get_ucode_data(equiv_cpu_table, buf, size); return size + UCODE_CONTAINER_HEADER_SIZE; /* add header length */ } diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index ba0f0ca9f28..c01ffa5b9b8 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -143,7 +143,7 @@ static void flush_gart(void) spin_lock_irqsave(&iommu_bitmap_lock, flags); if (need_flush) { - k8_flush_garts(); + amd_flush_garts(); need_flush = false; } spin_unlock_irqrestore(&iommu_bitmap_lock, flags); @@ -561,17 +561,17 @@ static void enable_gart_translations(void) { int i; - if (!k8_northbridges.gart_supported) + if (!amd_nb_has_feature(AMD_NB_GART)) return; - for (i = 0; i < k8_northbridges.num; i++) { - struct pci_dev *dev = k8_northbridges.nb_misc[i]; + for (i = 0; i < amd_nb_num(); i++) { + struct pci_dev *dev = node_to_amd_nb(i)->misc; enable_gart_translation(dev, __pa(agp_gatt_table)); } /* Flush the GART-TLB to remove stale entries */ - k8_flush_garts(); + amd_flush_garts(); } /* @@ -596,13 +596,13 @@ static void gart_fixup_northbridges(struct sys_device *dev) if (!fix_up_north_bridges) return; - if (!k8_northbridges.gart_supported) + if (!amd_nb_has_feature(AMD_NB_GART)) return; pr_info("PCI-DMA: Restoring GART aperture settings\n"); - for (i = 0; i < k8_northbridges.num; i++) { - struct pci_dev *dev = k8_northbridges.nb_misc[i]; + for (i = 0; i < amd_nb_num(); i++) { + struct pci_dev *dev = node_to_amd_nb(i)->misc; /* * Don't enable translations just yet. That is the next @@ -644,7 +644,7 @@ static struct sys_device device_gart = { * Private Northbridge GATT initialization in case we cannot use the * AGP driver for some reason. */ -static __init int init_k8_gatt(struct agp_kern_info *info) +static __init int init_amd_gatt(struct agp_kern_info *info) { unsigned aper_size, gatt_size, new_aper_size; unsigned aper_base, new_aper_base; @@ -656,8 +656,8 @@ static __init int init_k8_gatt(struct agp_kern_info *info) aper_size = aper_base = info->aper_size = 0; dev = NULL; - for (i = 0; i < k8_northbridges.num; i++) { - dev = k8_northbridges.nb_misc[i]; + for (i = 0; i < amd_nb_num(); i++) { + dev = node_to_amd_nb(i)->misc; new_aper_base = read_aperture(dev, &new_aper_size); if (!new_aper_base) goto nommu; @@ -725,13 +725,13 @@ static void gart_iommu_shutdown(void) if (!no_agp) return; - if (!k8_northbridges.gart_supported) + if (!amd_nb_has_feature(AMD_NB_GART)) return; - for (i = 0; i < k8_northbridges.num; i++) { + for (i = 0; i < amd_nb_num(); i++) { u32 ctl; - dev = k8_northbridges.nb_misc[i]; + dev = node_to_amd_nb(i)->misc; pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); ctl &= ~GARTEN; @@ -749,14 +749,14 @@ int __init gart_iommu_init(void) unsigned long scratch; long i; - if (!k8_northbridges.gart_supported) + if (!amd_nb_has_feature(AMD_NB_GART)) return 0; #ifndef CONFIG_AGP_AMD64 no_agp = 1; #else /* Makefile puts PCI initialization via subsys_initcall first. */ - /* Add other K8 AGP bridge drivers here */ + /* Add other AMD AGP bridge drivers here */ no_agp = no_agp || (agp_amd64_init() < 0) || (agp_copy_info(agp_bridge, &info) < 0); @@ -765,7 +765,7 @@ int __init gart_iommu_init(void) if (no_iommu || (!force_iommu && max_pfn <= MAX_DMA32_PFN) || !gart_iommu_aperture || - (no_agp && init_k8_gatt(&info) < 0)) { + (no_agp && init_amd_gatt(&info) < 0)) { if (max_pfn > MAX_DMA32_PFN) { pr_warning("More than 4GB of memory but GART IOMMU not available.\n"); pr_warning("falling back to iommu=soft.\n"); diff --git a/arch/x86/kernel/reboot_fixups_32.c b/arch/x86/kernel/reboot_fixups_32.c index fda313ebbb0..c8e41e90f59 100644 --- a/arch/x86/kernel/reboot_fixups_32.c +++ b/arch/x86/kernel/reboot_fixups_32.c @@ -43,17 +43,33 @@ static void rdc321x_reset(struct pci_dev *dev) outb(1, 0x92); } +static void ce4100_reset(struct pci_dev *dev) +{ + int i; + + for (i = 0; i < 10; i++) { + outb(0x2, 0xcf9); + udelay(50); + } +} + struct device_fixup { unsigned int vendor; unsigned int device; void (*reboot_fixup)(struct pci_dev *); }; +/* + * PCI ids solely used for fixups_table go here + */ +#define PCI_DEVICE_ID_INTEL_CE4100 0x0708 + static const struct device_fixup fixups_table[] = { { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset }, { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset }, { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset }, { PCI_VENDOR_ID_RDC, PCI_DEVICE_ID_RDC_R6030, rdc321x_reset }, +{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100, ce4100_reset }, }; /* diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index a0f52af256a..d3cfe26c025 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -705,7 +705,7 @@ static u64 __init get_max_mapped(void) void __init setup_arch(char **cmdline_p) { int acpi = 0; - int k8 = 0; + int amd = 0; unsigned long flags; #ifdef CONFIG_X86_32 @@ -991,12 +991,12 @@ void __init setup_arch(char **cmdline_p) acpi = acpi_numa_init(); #endif -#ifdef CONFIG_K8_NUMA +#ifdef CONFIG_AMD_NUMA if (!acpi) - k8 = !k8_numa_init(0, max_pfn); + amd = !amd_numa_init(0, max_pfn); #endif - initmem_init(0, max_pfn, acpi, k8); + initmem_init(0, max_pfn, acpi, amd); memblock_find_dma_reserve(); dma32_reserve_bootmem(); @@ -1045,10 +1045,7 @@ void __init setup_arch(char **cmdline_p) #endif init_apic_mappings(); - ioapic_init_mappings(); - - /* need to wait for io_apic is mapped */ - probe_nr_irqs_gsi(); + ioapic_and_gsi_init(); kvm_guest_init(); diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 68f61ac632e..ee886fe10ef 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1161,6 +1161,20 @@ out: preempt_enable(); } +void arch_disable_nonboot_cpus_begin(void) +{ + /* + * Avoid the smp alternatives switch during the disable_nonboot_cpus(). + * In the suspend path, we will be back in the SMP mode shortly anyways. + */ + skip_smp_alternatives = true; +} + +void arch_disable_nonboot_cpus_end(void) +{ + skip_smp_alternatives = false; +} + void arch_enable_nonboot_cpus_begin(void) { set_mtrr_aps_delayed_init(); diff --git a/arch/x86/kernel/trampoline_64.S b/arch/x86/kernel/trampoline_64.S index 3af2dff58b2..075d130efcf 100644 --- a/arch/x86/kernel/trampoline_64.S +++ b/arch/x86/kernel/trampoline_64.S @@ -127,7 +127,7 @@ startup_64: no_longmode: hlt jmp no_longmode -#include "verify_cpu_64.S" +#include "verify_cpu.S" # Careful these need to be in the same 64K segment as the above; tidt: diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 0c40d8b7241..356a0d455cf 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -872,6 +872,9 @@ __cpuinit int unsynchronized_tsc(void) if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) return 0; + + if (tsc_clocksource_reliable) + return 0; /* * Intel systems are normally all synchronized. * Exceptions must mark TSC as unstable: @@ -879,14 +882,92 @@ __cpuinit int unsynchronized_tsc(void) if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) { /* assume multi socket systems are not synchronized: */ if (num_possible_cpus() > 1) - tsc_unstable = 1; + return 1; } - return tsc_unstable; + return 0; +} + + +static void tsc_refine_calibration_work(struct work_struct *work); +static DECLARE_DELAYED_WORK(tsc_irqwork, tsc_refine_calibration_work); +/** + * tsc_refine_calibration_work - Further refine tsc freq calibration + * @work - ignored. + * + * This functions uses delayed work over a period of a + * second to further refine the TSC freq value. Since this is + * timer based, instead of loop based, we don't block the boot + * process while this longer calibration is done. + * + * If there are any calibration anomolies (too many SMIs, etc), + * or the refined calibration is off by 1% of the fast early + * calibration, we throw out the new calibration and use the + * early calibration. + */ +static void tsc_refine_calibration_work(struct work_struct *work) +{ + static u64 tsc_start = -1, ref_start; + static int hpet; + u64 tsc_stop, ref_stop, delta; + unsigned long freq; + + /* Don't bother refining TSC on unstable systems */ + if (check_tsc_unstable()) + goto out; + + /* + * Since the work is started early in boot, we may be + * delayed the first time we expire. So set the workqueue + * again once we know timers are working. + */ + if (tsc_start == -1) { + /* + * Only set hpet once, to avoid mixing hardware + * if the hpet becomes enabled later. + */ + hpet = is_hpet_enabled(); + schedule_delayed_work(&tsc_irqwork, HZ); + tsc_start = tsc_read_refs(&ref_start, hpet); + return; + } + + tsc_stop = tsc_read_refs(&ref_stop, hpet); + + /* hpet or pmtimer available ? */ + if (!hpet && !ref_start && !ref_stop) + goto out; + + /* Check, whether the sampling was disturbed by an SMI */ + if (tsc_start == ULLONG_MAX || tsc_stop == ULLONG_MAX) + goto out; + + delta = tsc_stop - tsc_start; + delta *= 1000000LL; + if (hpet) + freq = calc_hpet_ref(delta, ref_start, ref_stop); + else + freq = calc_pmtimer_ref(delta, ref_start, ref_stop); + + /* Make sure we're within 1% */ + if (abs(tsc_khz - freq) > tsc_khz/100) + goto out; + + tsc_khz = freq; + printk(KERN_INFO "Refined TSC clocksource calibration: " + "%lu.%03lu MHz.\n", (unsigned long)tsc_khz / 1000, + (unsigned long)tsc_khz % 1000); + +out: + clocksource_register_khz(&clocksource_tsc, tsc_khz); } -static void __init init_tsc_clocksource(void) + +static int __init init_tsc_clocksource(void) { + if (!cpu_has_tsc || tsc_disabled > 0) + return 0; + if (tsc_clocksource_reliable) clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY; /* lower the rating if we already know its unstable: */ @@ -894,8 +975,14 @@ static void __init init_tsc_clocksource(void) clocksource_tsc.rating = 0; clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS; } - clocksource_register_khz(&clocksource_tsc, tsc_khz); + schedule_delayed_work(&tsc_irqwork, 0); + return 0; } +/* + * We use device_initcall here, to ensure we run after the hpet + * is fully initialized, which may occur at fs_initcall time. + */ +device_initcall(init_tsc_clocksource); void __init tsc_init(void) { @@ -949,6 +1036,5 @@ void __init tsc_init(void) mark_tsc_unstable("TSCs unsynchronized"); check_system_tsc_reliable(); - init_tsc_clocksource(); } diff --git a/arch/x86/kernel/verify_cpu_64.S b/arch/x86/kernel/verify_cpu.S index 56a8c2a867d..0edefc19a11 100644 --- a/arch/x86/kernel/verify_cpu_64.S +++ b/arch/x86/kernel/verify_cpu.S @@ -7,6 +7,7 @@ * Copyright (c) 2007 Andi Kleen (ak@suse.de) * Copyright (c) 2007 Eric Biederman (ebiederm@xmission.com) * Copyright (c) 2007 Vivek Goyal (vgoyal@in.ibm.com) + * Copyright (c) 2010 Kees Cook (kees.cook@canonical.com) * * This source code is licensed under the GNU General Public License, * Version 2. See the file COPYING for more details. @@ -14,18 +15,17 @@ * This is a common code for verification whether CPU supports * long mode and SSE or not. It is not called directly instead this * file is included at various places and compiled in that context. - * Following are the current usage. + * This file is expected to run in 32bit code. Currently: * - * This file is included by both 16bit and 32bit code. + * arch/x86/boot/compressed/head_64.S: Boot cpu verification + * arch/x86/kernel/trampoline_64.S: secondary processor verfication + * arch/x86/kernel/head_32.S: processor startup * - * arch/x86_64/boot/setup.S : Boot cpu verification (16bit) - * arch/x86_64/boot/compressed/head.S: Boot cpu verification (32bit) - * arch/x86_64/kernel/trampoline.S: secondary processor verfication (16bit) - * arch/x86_64/kernel/acpi/wakeup.S:Verfication at resume (16bit) - * - * verify_cpu, returns the status of cpu check in register %eax. + * verify_cpu, returns the status of longmode and SSE in register %eax. * 0: Success 1: Failure * + * On Intel, the XD_DISABLE flag will be cleared as a side-effect. + * * The caller needs to check for the error code and take the action * appropriately. Either display a message or halt. */ @@ -62,8 +62,41 @@ verify_cpu: cmpl $0x444d4163,%ecx jnz verify_cpu_noamd mov $1,%di # cpu is from AMD + jmp verify_cpu_check verify_cpu_noamd: + cmpl $0x756e6547,%ebx # GenuineIntel? + jnz verify_cpu_check + cmpl $0x49656e69,%edx + jnz verify_cpu_check + cmpl $0x6c65746e,%ecx + jnz verify_cpu_check + + # only call IA32_MISC_ENABLE when: + # family > 6 || (family == 6 && model >= 0xd) + movl $0x1, %eax # check CPU family and model + cpuid + movl %eax, %ecx + + andl $0x0ff00f00, %eax # mask family and extended family + shrl $8, %eax + cmpl $6, %eax + ja verify_cpu_clear_xd # family > 6, ok + jb verify_cpu_check # family < 6, skip + + andl $0x000f00f0, %ecx # mask model and extended model + shrl $4, %ecx + cmpl $0xd, %ecx + jb verify_cpu_check # family == 6, model < 0xd, skip + +verify_cpu_clear_xd: + movl $MSR_IA32_MISC_ENABLE, %ecx + rdmsr + btrl $2, %edx # clear MSR_IA32_MISC_ENABLE_XD_DISABLE + jnc verify_cpu_check # only write MSR if bit was changed + wrmsr + +verify_cpu_check: movl $0x1,%eax # Does the cpu have what it takes cpuid andl $REQUIRED_MASK0,%edx diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index e03530aebfd..bf470075518 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -69,7 +69,7 @@ jiffies_64 = jiffies; PHDRS { text PT_LOAD FLAGS(5); /* R_E */ - data PT_LOAD FLAGS(7); /* RWE */ + data PT_LOAD FLAGS(6); /* RW_ */ #ifdef CONFIG_X86_64 user PT_LOAD FLAGS(5); /* R_E */ #ifdef CONFIG_SMP @@ -116,6 +116,10 @@ SECTIONS EXCEPTION_TABLE(16) :text = 0x9090 +#if defined(CONFIG_DEBUG_RODATA) + /* .text should occupy whole number of pages */ + . = ALIGN(PAGE_SIZE); +#endif X64_ALIGN_DEBUG_RODATA_BEGIN RO_DATA(PAGE_SIZE) X64_ALIGN_DEBUG_RODATA_END @@ -335,7 +339,7 @@ SECTIONS __bss_start = .; *(.bss..page_aligned) *(.bss) - . = ALIGN(4); + . = ALIGN(PAGE_SIZE); __bss_stop = .; } diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S index e7d5382ef26..4f420c2f2d5 100644 --- a/arch/x86/lguest/i386_head.S +++ b/arch/x86/lguest/i386_head.S @@ -4,7 +4,6 @@ #include <asm/asm-offsets.h> #include <asm/thread_info.h> #include <asm/processor-flags.h> -#include <asm/pgtable.h> /*G:020 * Our story starts with the kernel booting into startup_32 in @@ -38,113 +37,9 @@ ENTRY(lguest_entry) /* Set up the initial stack so we can run C code. */ movl $(init_thread_union+THREAD_SIZE),%esp - call init_pagetables - /* Jumps are relative: we're running __PAGE_OFFSET too low. */ jmp lguest_init+__PAGE_OFFSET -/* - * Initialize page tables. This creates a PDE and a set of page - * tables, which are located immediately beyond __brk_base. The variable - * _brk_end is set up to point to the first "safe" location. - * Mappings are created both at virtual address 0 (identity mapping) - * and PAGE_OFFSET for up to _end. - * - * FIXME: This code is taken verbatim from arch/x86/kernel/head_32.S: they - * don't have a stack at this point, so we can't just use call and ret. - */ -init_pagetables: -#if PTRS_PER_PMD > 1 -#define PAGE_TABLE_SIZE(pages) (((pages) / PTRS_PER_PMD) + PTRS_PER_PGD) -#else -#define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD) -#endif -#define pa(X) ((X) - __PAGE_OFFSET) - -/* Enough space to fit pagetables for the low memory linear map */ -MAPPING_BEYOND_END = \ - PAGE_TABLE_SIZE(((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT) << PAGE_SHIFT -#ifdef CONFIG_X86_PAE - - /* - * In PAE mode initial_page_table is statically defined to contain - * enough entries to cover the VMSPLIT option (that is the top 1, 2 or 3 - * entries). The identity mapping is handled by pointing two PGD entries - * to the first kernel PMD. - * - * Note the upper half of each PMD or PTE are always zero at this stage. - */ - -#define KPMDS (((-__PAGE_OFFSET) >> 30) & 3) /* Number of kernel PMDs */ - - xorl %ebx,%ebx /* %ebx is kept at zero */ - - movl $pa(__brk_base), %edi - movl $pa(initial_pg_pmd), %edx - movl $PTE_IDENT_ATTR, %eax -10: - leal PDE_IDENT_ATTR(%edi),%ecx /* Create PMD entry */ - movl %ecx,(%edx) /* Store PMD entry */ - /* Upper half already zero */ - addl $8,%edx - movl $512,%ecx -11: - stosl - xchgl %eax,%ebx - stosl - xchgl %eax,%ebx - addl $0x1000,%eax - loop 11b - - /* - * End condition: we must map up to the end + MAPPING_BEYOND_END. - */ - movl $pa(_end) + MAPPING_BEYOND_END + PTE_IDENT_ATTR, %ebp - cmpl %ebp,%eax - jb 10b -1: - addl $__PAGE_OFFSET, %edi - movl %edi, pa(_brk_end) - shrl $12, %eax - movl %eax, pa(max_pfn_mapped) - - /* Do early initialization of the fixmap area */ - movl $pa(initial_pg_fixmap)+PDE_IDENT_ATTR,%eax - movl %eax,pa(initial_pg_pmd+0x1000*KPMDS-8) -#else /* Not PAE */ - -page_pde_offset = (__PAGE_OFFSET >> 20); - - movl $pa(__brk_base), %edi - movl $pa(initial_page_table), %edx - movl $PTE_IDENT_ATTR, %eax -10: - leal PDE_IDENT_ATTR(%edi),%ecx /* Create PDE entry */ - movl %ecx,(%edx) /* Store identity PDE entry */ - movl %ecx,page_pde_offset(%edx) /* Store kernel PDE entry */ - addl $4,%edx - movl $1024, %ecx -11: - stosl - addl $0x1000,%eax - loop 11b - /* - * End condition: we must map up to the end + MAPPING_BEYOND_END. - */ - movl $pa(_end) + MAPPING_BEYOND_END + PTE_IDENT_ATTR, %ebp - cmpl %ebp,%eax - jb 10b - addl $__PAGE_OFFSET, %edi - movl %edi, pa(_brk_end) - shrl $12, %eax - movl %eax, pa(max_pfn_mapped) - - /* Do early initialization of the fixmap area */ - movl $pa(initial_pg_fixmap)+PDE_IDENT_ATTR,%eax - movl %eax,pa(initial_page_table+0xffc) -#endif - ret - /*G:055 * We create a macro which puts the assembler code between lgstart_ and lgend_ * markers. These templates are put in the .text section: they can't be diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile index 55543397a8a..09df2f9a3d6 100644 --- a/arch/x86/mm/Makefile +++ b/arch/x86/mm/Makefile @@ -23,7 +23,7 @@ mmiotrace-y := kmmio.o pf_in.o mmio-mod.o obj-$(CONFIG_MMIOTRACE_TEST) += testmmiotrace.o obj-$(CONFIG_NUMA) += numa.o numa_$(BITS).o -obj-$(CONFIG_K8_NUMA) += k8topology_64.o +obj-$(CONFIG_AMD_NUMA) += amdtopology_64.o obj-$(CONFIG_ACPI_NUMA) += srat_$(BITS).o obj-$(CONFIG_HAVE_MEMBLOCK) += memblock.o diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/amdtopology_64.c index 804a3b6c6e1..51fae9cfdec 100644 --- a/arch/x86/mm/k8topology_64.c +++ b/arch/x86/mm/amdtopology_64.c @@ -1,8 +1,8 @@ /* - * AMD K8 NUMA support. + * AMD NUMA support. * Discover the memory map and associated nodes. * - * This version reads it directly from the K8 northbridge. + * This version reads it directly from the AMD northbridge. * * Copyright 2002,2003 Andi Kleen, SuSE Labs. */ @@ -57,7 +57,7 @@ static __init void early_get_boot_cpu_id(void) { /* * need to get the APIC ID of the BSP so can use that to - * create apicid_to_node in k8_scan_nodes() + * create apicid_to_node in amd_scan_nodes() */ #ifdef CONFIG_X86_MPPARSE /* @@ -69,7 +69,7 @@ static __init void early_get_boot_cpu_id(void) early_init_lapic_mapping(); } -int __init k8_get_nodes(struct bootnode *physnodes) +int __init amd_get_nodes(struct bootnode *physnodes) { int i; int ret = 0; @@ -82,7 +82,7 @@ int __init k8_get_nodes(struct bootnode *physnodes) return ret; } -int __init k8_numa_init(unsigned long start_pfn, unsigned long end_pfn) +int __init amd_numa_init(unsigned long start_pfn, unsigned long end_pfn) { unsigned long start = PFN_PHYS(start_pfn); unsigned long end = PFN_PHYS(end_pfn); @@ -194,7 +194,7 @@ int __init k8_numa_init(unsigned long start_pfn, unsigned long end_pfn) return 0; } -int __init k8_scan_nodes(void) +int __init amd_scan_nodes(void) { unsigned int bits; unsigned int cores; diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index c0e28a13de7..947f42abe82 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -364,8 +364,9 @@ void free_init_pages(char *what, unsigned long begin, unsigned long end) /* * We just marked the kernel text read only above, now that * we are going to free part of that, we need to make that - * writeable first. + * writeable and non-executable first. */ + set_memory_nx(begin, (end - begin) >> PAGE_SHIFT); set_memory_rw(begin, (end - begin) >> PAGE_SHIFT); printk(KERN_INFO "Freeing %s: %luk freed\n", what, (end - begin) >> 10); diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index 0e969f9f401..f89b5bb4e93 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -226,7 +226,7 @@ page_table_range_init(unsigned long start, unsigned long end, pgd_t *pgd_base) static inline int is_kernel_text(unsigned long addr) { - if (addr >= PAGE_OFFSET && addr <= (unsigned long)__init_end) + if (addr >= (unsigned long)_text && addr <= (unsigned long)__init_end) return 1; return 0; } @@ -912,6 +912,23 @@ void set_kernel_text_ro(void) set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT); } +static void mark_nxdata_nx(void) +{ + /* + * When this called, init has already been executed and released, + * so everything past _etext sould be NX. + */ + unsigned long start = PFN_ALIGN(_etext); + /* + * This comes from is_kernel_text upper limit. Also HPAGE where used: + */ + unsigned long size = (((unsigned long)__init_end + HPAGE_SIZE) & HPAGE_MASK) - start; + + if (__supported_pte_mask & _PAGE_NX) + printk(KERN_INFO "NX-protecting the kernel data: %luk\n", size >> 10); + set_pages_nx(virt_to_page(start), size >> PAGE_SHIFT); +} + void mark_rodata_ro(void) { unsigned long start = PFN_ALIGN(_text); @@ -946,6 +963,7 @@ void mark_rodata_ro(void) printk(KERN_INFO "Testing CPA: write protecting again\n"); set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT); #endif + mark_nxdata_nx(); } #endif diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 7ffc9b727ef..7762a517d69 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -264,7 +264,7 @@ static struct bootnode physnodes[MAX_NUMNODES] __initdata; static char *cmdline __initdata; static int __init setup_physnodes(unsigned long start, unsigned long end, - int acpi, int k8) + int acpi, int amd) { int nr_nodes = 0; int ret = 0; @@ -274,13 +274,13 @@ static int __init setup_physnodes(unsigned long start, unsigned long end, if (acpi) nr_nodes = acpi_get_nodes(physnodes); #endif -#ifdef CONFIG_K8_NUMA - if (k8) - nr_nodes = k8_get_nodes(physnodes); +#ifdef CONFIG_AMD_NUMA + if (amd) + nr_nodes = amd_get_nodes(physnodes); #endif /* * Basic sanity checking on the physical node map: there may be errors - * if the SRAT or K8 incorrectly reported the topology or the mem= + * if the SRAT or AMD code incorrectly reported the topology or the mem= * kernel parameter is used. */ for (i = 0; i < nr_nodes; i++) { @@ -549,7 +549,7 @@ static int __init split_nodes_size_interleave(u64 addr, u64 max_addr, u64 size) * numa=fake command-line option. */ static int __init numa_emulation(unsigned long start_pfn, - unsigned long last_pfn, int acpi, int k8) + unsigned long last_pfn, int acpi, int amd) { u64 addr = start_pfn << PAGE_SHIFT; u64 max_addr = last_pfn << PAGE_SHIFT; @@ -557,7 +557,7 @@ static int __init numa_emulation(unsigned long start_pfn, int num_nodes; int i; - num_phys_nodes = setup_physnodes(addr, max_addr, acpi, k8); + num_phys_nodes = setup_physnodes(addr, max_addr, acpi, amd); /* * If the numa=fake command-line contains a 'M' or 'G', it represents * the fixed node size. Otherwise, if it is just a single number N, @@ -602,7 +602,7 @@ static int __init numa_emulation(unsigned long start_pfn, #endif /* CONFIG_NUMA_EMU */ void __init initmem_init(unsigned long start_pfn, unsigned long last_pfn, - int acpi, int k8) + int acpi, int amd) { int i; @@ -610,7 +610,7 @@ void __init initmem_init(unsigned long start_pfn, unsigned long last_pfn, nodes_clear(node_online_map); #ifdef CONFIG_NUMA_EMU - if (cmdline && !numa_emulation(start_pfn, last_pfn, acpi, k8)) + if (cmdline && !numa_emulation(start_pfn, last_pfn, acpi, amd)) return; nodes_clear(node_possible_map); nodes_clear(node_online_map); @@ -624,8 +624,8 @@ void __init initmem_init(unsigned long start_pfn, unsigned long last_pfn, nodes_clear(node_online_map); #endif -#ifdef CONFIG_K8_NUMA - if (!numa_off && k8 && !k8_scan_nodes()) +#ifdef CONFIG_AMD_NUMA + if (!numa_off && amd && !amd_scan_nodes()) return; nodes_clear(node_possible_map); nodes_clear(node_online_map); diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 532e7933d60..8b830ca14ac 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -13,6 +13,7 @@ #include <linux/pfn.h> #include <linux/percpu.h> #include <linux/gfp.h> +#include <linux/pci.h> #include <asm/e820.h> #include <asm/processor.h> @@ -255,13 +256,16 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address, unsigned long pfn) { pgprot_t forbidden = __pgprot(0); + pgprot_t required = __pgprot(0); /* * The BIOS area between 640k and 1Mb needs to be executable for * PCI BIOS based config access (CONFIG_PCI_GOBIOS) support. */ - if (within(pfn, BIOS_BEGIN >> PAGE_SHIFT, BIOS_END >> PAGE_SHIFT)) +#ifdef CONFIG_PCI_BIOS + if (pcibios_enabled && within(pfn, BIOS_BEGIN >> PAGE_SHIFT, BIOS_END >> PAGE_SHIFT)) pgprot_val(forbidden) |= _PAGE_NX; +#endif /* * The kernel text needs to be executable for obvious reasons @@ -278,6 +282,12 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address, if (within(pfn, __pa((unsigned long)__start_rodata) >> PAGE_SHIFT, __pa((unsigned long)__end_rodata) >> PAGE_SHIFT)) pgprot_val(forbidden) |= _PAGE_RW; + /* + * .data and .bss should always be writable. + */ + if (within(address, (unsigned long)_sdata, (unsigned long)_edata) || + within(address, (unsigned long)__bss_start, (unsigned long)__bss_stop)) + pgprot_val(required) |= _PAGE_RW; #if defined(CONFIG_X86_64) && defined(CONFIG_DEBUG_RODATA) /* @@ -317,6 +327,7 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address, #endif prot = __pgprot(pgprot_val(prot) & ~pgprot_val(forbidden)); + prot = __pgprot(pgprot_val(prot) | pgprot_val(required)); return prot; } @@ -393,7 +404,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address, { unsigned long nextpage_addr, numpages, pmask, psize, flags, addr, pfn; pte_t new_pte, old_pte, *tmp; - pgprot_t old_prot, new_prot; + pgprot_t old_prot, new_prot, req_prot; int i, do_split = 1; unsigned int level; @@ -438,10 +449,10 @@ try_preserve_large_page(pte_t *kpte, unsigned long address, * We are safe now. Check whether the new pgprot is the same: */ old_pte = *kpte; - old_prot = new_prot = pte_pgprot(old_pte); + old_prot = new_prot = req_prot = pte_pgprot(old_pte); - pgprot_val(new_prot) &= ~pgprot_val(cpa->mask_clr); - pgprot_val(new_prot) |= pgprot_val(cpa->mask_set); + pgprot_val(req_prot) &= ~pgprot_val(cpa->mask_clr); + pgprot_val(req_prot) |= pgprot_val(cpa->mask_set); /* * old_pte points to the large page base address. So we need @@ -450,17 +461,17 @@ try_preserve_large_page(pte_t *kpte, unsigned long address, pfn = pte_pfn(old_pte) + ((address & (psize - 1)) >> PAGE_SHIFT); cpa->pfn = pfn; - new_prot = static_protections(new_prot, address, pfn); + new_prot = static_protections(req_prot, address, pfn); /* * We need to check the full range, whether * static_protection() requires a different pgprot for one of * the pages in the range we try to preserve: */ - addr = address + PAGE_SIZE; - pfn++; - for (i = 1; i < cpa->numpages; i++, addr += PAGE_SIZE, pfn++) { - pgprot_t chk_prot = static_protections(new_prot, addr, pfn); + addr = address & pmask; + pfn = pte_pfn(old_pte); + for (i = 0; i < (psize >> PAGE_SHIFT); i++, addr += PAGE_SIZE, pfn++) { + pgprot_t chk_prot = static_protections(req_prot, addr, pfn); if (pgprot_val(chk_prot) != pgprot_val(new_prot)) goto out_unlock; @@ -483,7 +494,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address, * that we limited the number of possible pages already to * the number of pages in the large page. */ - if (address == (nextpage_addr - psize) && cpa->numpages == numpages) { + if (address == (address & pmask) && cpa->numpages == (psize >> PAGE_SHIFT)) { /* * The address is aligned and the number of pages * covers the full page. diff --git a/arch/x86/mm/setup_nx.c b/arch/x86/mm/setup_nx.c index a3250aa3408..410531d3c29 100644 --- a/arch/x86/mm/setup_nx.c +++ b/arch/x86/mm/setup_nx.c @@ -41,7 +41,7 @@ void __init x86_report_nx(void) { if (!cpu_has_nx) { printk(KERN_NOTICE "Notice: NX (Execute Disable) protection " - "missing in CPU or disabled in BIOS!\n"); + "missing in CPU!\n"); } else { #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE) if (disable_nx) { diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c index a17dffd136c..f16434568a5 100644 --- a/arch/x86/mm/srat_32.c +++ b/arch/x86/mm/srat_32.c @@ -92,6 +92,7 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *cpu_affinity) /* mark this node as "seen" in node bitmap */ BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain_lo); + /* don't need to check apic_id here, because it is always 8 bits */ apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain_lo; printk(KERN_DEBUG "CPU %02x in proximity domain %02x\n", diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index a35cb9d8b06..171a0aacb99 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -134,6 +134,10 @@ acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa) } apic_id = pa->apic_id; + if (apic_id >= MAX_LOCAL_APIC) { + printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node); + return; + } apicid_to_node[apic_id] = node; node_set(node, cpu_nodes_parsed); acpi_numa = 1; @@ -168,6 +172,12 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) apic_id = (pa->apic_id << 8) | pa->local_sapic_eid; else apic_id = pa->apic_id; + + if (apic_id >= MAX_LOCAL_APIC) { + printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node); + return; + } + apicid_to_node[apic_id] = node; node_set(node, cpu_nodes_parsed); acpi_numa = 1; diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c index 51104b33fd5..c3b8e24f2b1 100644 --- a/arch/x86/oprofile/op_model_amd.c +++ b/arch/x86/oprofile/op_model_amd.c @@ -610,6 +610,7 @@ static int force_ibs_eilvt_setup(void) ret = setup_ibs_ctl(i); if (ret) return ret; + pr_err(FW_BUG "using offset %d for IBS interrupts\n", i); return 0; } diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile index effd96e33f1..6b8759f7634 100644 --- a/arch/x86/pci/Makefile +++ b/arch/x86/pci/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_PCI_OLPC) += olpc.o obj-$(CONFIG_PCI_XEN) += xen.o obj-y += fixup.o +obj-$(CONFIG_X86_INTEL_CE) += ce4100.o obj-$(CONFIG_ACPI) += acpi.o obj-y += legacy.o irq.o diff --git a/arch/x86/pci/ce4100.c b/arch/x86/pci/ce4100.c new file mode 100644 index 00000000000..85b68ef5e80 --- /dev/null +++ b/arch/x86/pci/ce4100.c @@ -0,0 +1,315 @@ +/* + * GPL LICENSE SUMMARY + * + * Copyright(c) 2010 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Corporation + * 2200 Mission College Blvd. + * Santa Clara, CA 97052 + * + * This provides access methods for PCI registers that mis-behave on + * the CE4100. Each register can be assigned a private init, read and + * write routine. The exception to this is the bridge device. The + * bridge device is the only device on bus zero (0) that requires any + * fixup so it is a special case ATM + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> + +#include <asm/pci_x86.h> + +struct sim_reg { + u32 value; + u32 mask; +}; + +struct sim_dev_reg { + int dev_func; + int reg; + void (*init)(struct sim_dev_reg *reg); + void (*read)(struct sim_dev_reg *reg, u32 *value); + void (*write)(struct sim_dev_reg *reg, u32 value); + struct sim_reg sim_reg; +}; + +struct sim_reg_op { + void (*init)(struct sim_dev_reg *reg); + void (*read)(struct sim_dev_reg *reg, u32 value); + void (*write)(struct sim_dev_reg *reg, u32 value); +}; + +#define MB (1024 * 1024) +#define KB (1024) +#define SIZE_TO_MASK(size) (~(size - 1)) + +#define DEFINE_REG(device, func, offset, size, init_op, read_op, write_op)\ +{ PCI_DEVFN(device, func), offset, init_op, read_op, write_op,\ + {0, SIZE_TO_MASK(size)} }, + +static void reg_init(struct sim_dev_reg *reg) +{ + pci_direct_conf1.read(0, 1, reg->dev_func, reg->reg, 4, + ®->sim_reg.value); +} + +static void reg_read(struct sim_dev_reg *reg, u32 *value) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&pci_config_lock, flags); + *value = reg->sim_reg.value; + raw_spin_unlock_irqrestore(&pci_config_lock, flags); +} + +static void reg_write(struct sim_dev_reg *reg, u32 value) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&pci_config_lock, flags); + reg->sim_reg.value = (value & reg->sim_reg.mask) | + (reg->sim_reg.value & ~reg->sim_reg.mask); + raw_spin_unlock_irqrestore(&pci_config_lock, flags); +} + +static void sata_reg_init(struct sim_dev_reg *reg) +{ + pci_direct_conf1.read(0, 1, PCI_DEVFN(14, 0), 0x10, 4, + ®->sim_reg.value); + reg->sim_reg.value += 0x400; +} + +static void ehci_reg_read(struct sim_dev_reg *reg, u32 *value) +{ + reg_read(reg, value); + if (*value != reg->sim_reg.mask) + *value |= 0x100; +} + +void sata_revid_init(struct sim_dev_reg *reg) +{ + reg->sim_reg.value = 0x01060100; + reg->sim_reg.mask = 0; +} + +static void sata_revid_read(struct sim_dev_reg *reg, u32 *value) +{ + reg_read(reg, value); +} + +static struct sim_dev_reg bus1_fixups[] = { + DEFINE_REG(2, 0, 0x10, (16*MB), reg_init, reg_read, reg_write) + DEFINE_REG(2, 0, 0x14, (256), reg_init, reg_read, reg_write) + DEFINE_REG(2, 1, 0x10, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(3, 0, 0x10, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(4, 0, 0x10, (128*KB), reg_init, reg_read, reg_write) + DEFINE_REG(4, 1, 0x10, (128*KB), reg_init, reg_read, reg_write) + DEFINE_REG(6, 0, 0x10, (512*KB), reg_init, reg_read, reg_write) + DEFINE_REG(6, 1, 0x10, (512*KB), reg_init, reg_read, reg_write) + DEFINE_REG(6, 2, 0x10, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(8, 0, 0x10, (1*MB), reg_init, reg_read, reg_write) + DEFINE_REG(8, 1, 0x10, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(8, 2, 0x10, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(9, 0, 0x10 , (1*MB), reg_init, reg_read, reg_write) + DEFINE_REG(9, 0, 0x14, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(10, 0, 0x10, (256), reg_init, reg_read, reg_write) + DEFINE_REG(10, 0, 0x14, (256*MB), reg_init, reg_read, reg_write) + DEFINE_REG(11, 0, 0x10, (256), reg_init, reg_read, reg_write) + DEFINE_REG(11, 0, 0x14, (256), reg_init, reg_read, reg_write) + DEFINE_REG(11, 1, 0x10, (256), reg_init, reg_read, reg_write) + DEFINE_REG(11, 2, 0x10, (256), reg_init, reg_read, reg_write) + DEFINE_REG(11, 2, 0x14, (256), reg_init, reg_read, reg_write) + DEFINE_REG(11, 2, 0x18, (256), reg_init, reg_read, reg_write) + DEFINE_REG(11, 3, 0x10, (256), reg_init, reg_read, reg_write) + DEFINE_REG(11, 3, 0x14, (256), reg_init, reg_read, reg_write) + DEFINE_REG(11, 4, 0x10, (256), reg_init, reg_read, reg_write) + DEFINE_REG(11, 5, 0x10, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(11, 6, 0x10, (256), reg_init, reg_read, reg_write) + DEFINE_REG(11, 7, 0x10, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(12, 0, 0x10, (128*KB), reg_init, reg_read, reg_write) + DEFINE_REG(12, 0, 0x14, (256), reg_init, reg_read, reg_write) + DEFINE_REG(12, 1, 0x10, (1024), reg_init, reg_read, reg_write) + DEFINE_REG(13, 0, 0x10, (32*KB), reg_init, ehci_reg_read, reg_write) + DEFINE_REG(13, 1, 0x10, (32*KB), reg_init, ehci_reg_read, reg_write) + DEFINE_REG(14, 0, 0x8, 0, sata_revid_init, sata_revid_read, 0) + DEFINE_REG(14, 0, 0x10, 0, reg_init, reg_read, reg_write) + DEFINE_REG(14, 0, 0x14, 0, reg_init, reg_read, reg_write) + DEFINE_REG(14, 0, 0x18, 0, reg_init, reg_read, reg_write) + DEFINE_REG(14, 0, 0x1C, 0, reg_init, reg_read, reg_write) + DEFINE_REG(14, 0, 0x20, 0, reg_init, reg_read, reg_write) + DEFINE_REG(14, 0, 0x24, (0x200), sata_reg_init, reg_read, reg_write) + DEFINE_REG(15, 0, 0x10, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(15, 0, 0x14, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(16, 0, 0x10, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(16, 0, 0x14, (64*MB), reg_init, reg_read, reg_write) + DEFINE_REG(16, 0, 0x18, (64*MB), reg_init, reg_read, reg_write) + DEFINE_REG(17, 0, 0x10, (128*KB), reg_init, reg_read, reg_write) + DEFINE_REG(18, 0, 0x10, (1*KB), reg_init, reg_read, reg_write) +}; + +static void __init init_sim_regs(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) { + if (bus1_fixups[i].init) + bus1_fixups[i].init(&bus1_fixups[i]); + } +} + +static inline void extract_bytes(u32 *value, int reg, int len) +{ + uint32_t mask; + + *value >>= ((reg & 3) * 8); + mask = 0xFFFFFFFF >> ((4 - len) * 8); + *value &= mask; +} + +int bridge_read(unsigned int devfn, int reg, int len, u32 *value) +{ + u32 av_bridge_base, av_bridge_limit; + int retval = 0; + + switch (reg) { + /* Make BARs appear to not request any memory. */ + case PCI_BASE_ADDRESS_0: + case PCI_BASE_ADDRESS_0 + 1: + case PCI_BASE_ADDRESS_0 + 2: + case PCI_BASE_ADDRESS_0 + 3: + *value = 0; + break; + + /* Since subordinate bus number register is hardwired + * to zero and read only, so do the simulation. + */ + case PCI_PRIMARY_BUS: + if (len == 4) + *value = 0x00010100; + break; + + case PCI_SUBORDINATE_BUS: + *value = 1; + break; + + case PCI_MEMORY_BASE: + case PCI_MEMORY_LIMIT: + /* Get the A/V bridge base address. */ + pci_direct_conf1.read(0, 0, devfn, + PCI_BASE_ADDRESS_0, 4, &av_bridge_base); + + av_bridge_limit = av_bridge_base + (512*MB - 1); + av_bridge_limit >>= 16; + av_bridge_limit &= 0xFFF0; + + av_bridge_base >>= 16; + av_bridge_base &= 0xFFF0; + + if (reg == PCI_MEMORY_LIMIT) + *value = av_bridge_limit; + else if (len == 2) + *value = av_bridge_base; + else + *value = (av_bridge_limit << 16) | av_bridge_base; + break; + /* Make prefetchable memory limit smaller than prefetchable + * memory base, so not claim prefetchable memory space. + */ + case PCI_PREF_MEMORY_BASE: + *value = 0xFFF0; + break; + case PCI_PREF_MEMORY_LIMIT: + *value = 0x0; + break; + /* Make IO limit smaller than IO base, so not claim IO space. */ + case PCI_IO_BASE: + *value = 0xF0; + break; + case PCI_IO_LIMIT: + *value = 0; + break; + default: + retval = 1; + } + return retval; +} + +static int ce4100_conf_read(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 *value) +{ + int i, retval = 1; + + if (bus == 1) { + for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) { + if (bus1_fixups[i].dev_func == devfn && + bus1_fixups[i].reg == (reg & ~3) && + bus1_fixups[i].read) { + bus1_fixups[i].read(&(bus1_fixups[i]), + value); + extract_bytes(value, reg, len); + return 0; + } + } + } + + if (bus == 0 && (PCI_DEVFN(1, 0) == devfn) && + !bridge_read(devfn, reg, len, value)) + return 0; + + return pci_direct_conf1.read(seg, bus, devfn, reg, len, value); +} + +static int ce4100_conf_write(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 value) +{ + int i; + + if (bus == 1) { + for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) { + if (bus1_fixups[i].dev_func == devfn && + bus1_fixups[i].reg == (reg & ~3) && + bus1_fixups[i].write) { + bus1_fixups[i].write(&(bus1_fixups[i]), + value); + return 0; + } + } + } + + /* Discard writes to A/V bridge BAR. */ + if (bus == 0 && PCI_DEVFN(1, 0) == devfn && + ((reg & ~3) == PCI_BASE_ADDRESS_0)) + return 0; + + return pci_direct_conf1.write(seg, bus, devfn, reg, len, value); +} + +struct pci_raw_ops ce4100_pci_conf = { + .read = ce4100_conf_read, + .write = ce4100_conf_write, +}; + +static int __init ce4100_pci_init(void) +{ + init_sim_regs(); + raw_pci_ops = &ce4100_pci_conf; + return 0; +} +subsys_initcall(ce4100_pci_init); diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c index 2492d165096..a5f7d0d63de 100644 --- a/arch/x86/pci/pcbios.c +++ b/arch/x86/pci/pcbios.c @@ -9,6 +9,7 @@ #include <linux/uaccess.h> #include <asm/pci_x86.h> #include <asm/pci-functions.h> +#include <asm/cacheflush.h> /* BIOS32 signature: "_32_" */ #define BIOS32_SIGNATURE (('_' << 0) + ('3' << 8) + ('2' << 16) + ('_' << 24)) @@ -25,6 +26,27 @@ #define PCIBIOS_HW_TYPE1_SPEC 0x10 #define PCIBIOS_HW_TYPE2_SPEC 0x20 +int pcibios_enabled; + +/* According to the BIOS specification at: + * http://members.datafast.net.au/dft0802/specs/bios21.pdf, we could + * restrict the x zone to some pages and make it ro. But this may be + * broken on some bios, complex to handle with static_protections. + * We could make the 0xe0000-0x100000 range rox, but this can break + * some ISA mapping. + * + * So we let's an rw and x hole when pcibios is used. This shouldn't + * happen for modern system with mmconfig, and if you don't want it + * you could disable pcibios... + */ +static inline void set_bios_x(void) +{ + pcibios_enabled = 1; + set_memory_x(PAGE_OFFSET + BIOS_BEGIN, (BIOS_END - BIOS_BEGIN) >> PAGE_SHIFT); + if (__supported_pte_mask & _PAGE_NX) + printk(KERN_INFO "PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.\n"); +} + /* * This is the standard structure used to identify the entry point * to the BIOS32 Service Directory, as documented in @@ -332,6 +354,7 @@ static struct pci_raw_ops * __devinit pci_find_bios(void) DBG("PCI: BIOS32 Service Directory entry at 0x%lx\n", bios32_entry); bios32_indirect.address = bios32_entry + PAGE_OFFSET; + set_bios_x(); if (check_pcibios()) return &pci_bios_access; } diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile index 7bf70b812fa..021eee91c05 100644 --- a/arch/x86/platform/Makefile +++ b/arch/x86/platform/Makefile @@ -1,5 +1,7 @@ # Platform specific code goes here +obj-y += ce4100/ obj-y += efi/ +obj-y += iris/ obj-y += mrst/ obj-y += olpc/ obj-y += scx200/ diff --git a/arch/x86/platform/ce4100/Makefile b/arch/x86/platform/ce4100/Makefile new file mode 100644 index 00000000000..91fc92971d9 --- /dev/null +++ b/arch/x86/platform/ce4100/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_X86_INTEL_CE) += ce4100.o diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c new file mode 100644 index 00000000000..d2c0d51a717 --- /dev/null +++ b/arch/x86/platform/ce4100/ce4100.c @@ -0,0 +1,132 @@ +/* + * Intel CE4100 platform specific setup code + * + * (C) Copyright 2010 Intel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/serial_reg.h> +#include <linux/serial_8250.h> + +#include <asm/setup.h> +#include <asm/io.h> + +static int ce4100_i8042_detect(void) +{ + return 0; +} + +static void __init sdv_find_smp_config(void) +{ +} + +#ifdef CONFIG_SERIAL_8250 + + +static unsigned int mem_serial_in(struct uart_port *p, int offset) +{ + offset = offset << p->regshift; + return readl(p->membase + offset); +} + +/* + * The UART Tx interrupts are not set under some conditions and therefore serial + * transmission hangs. This is a silicon issue and has not been root caused. The + * workaround for this silicon issue checks UART_LSR_THRE bit and UART_LSR_TEMT + * bit of LSR register in interrupt handler to see whether at least one of these + * two bits is set, if so then process the transmit request. If this workaround + * is not applied, then the serial transmission may hang. This workaround is for + * errata number 9 in Errata - B step. +*/ + +static unsigned int ce4100_mem_serial_in(struct uart_port *p, int offset) +{ + unsigned int ret, ier, lsr; + + if (offset == UART_IIR) { + offset = offset << p->regshift; + ret = readl(p->membase + offset); + if (ret & UART_IIR_NO_INT) { + /* see if the TX interrupt should have really set */ + ier = mem_serial_in(p, UART_IER); + /* see if the UART's XMIT interrupt is enabled */ + if (ier & UART_IER_THRI) { + lsr = mem_serial_in(p, UART_LSR); + /* now check to see if the UART should be + generating an interrupt (but isn't) */ + if (lsr & (UART_LSR_THRE | UART_LSR_TEMT)) + ret &= ~UART_IIR_NO_INT; + } + } + } else + ret = mem_serial_in(p, offset); + return ret; +} + +static void ce4100_mem_serial_out(struct uart_port *p, int offset, int value) +{ + offset = offset << p->regshift; + writel(value, p->membase + offset); +} + +static void ce4100_serial_fixup(int port, struct uart_port *up, + unsigned short *capabilites) +{ +#ifdef CONFIG_EARLY_PRINTK + /* + * Over ride the legacy port configuration that comes from + * asm/serial.h. Using the ioport driver then switching to the + * PCI memmaped driver hangs the IOAPIC + */ + if (up->iotype != UPIO_MEM32) { + up->uartclk = 14745600; + up->mapbase = 0xdffe0200; + set_fixmap_nocache(FIX_EARLYCON_MEM_BASE, + up->mapbase & PAGE_MASK); + up->membase = + (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE); + up->membase += up->mapbase & ~PAGE_MASK; + up->iotype = UPIO_MEM32; + up->regshift = 2; + } +#endif + up->iobase = 0; + up->serial_in = ce4100_mem_serial_in; + up->serial_out = ce4100_mem_serial_out; + + *capabilites |= (1 << 12); +} + +static __init void sdv_serial_fixup(void) +{ + serial8250_set_isa_configurator(ce4100_serial_fixup); +} + +#else +static inline void sdv_serial_fixup(void); +#endif + +static void __init sdv_arch_setup(void) +{ + sdv_serial_fixup(); +} + +/* + * CE4100 specific x86_init function overrides and early setup + * calls. + */ +void __init x86_ce4100_early_setup(void) +{ + x86_init.oem.arch_setup = sdv_arch_setup; + x86_platform.i8042_detect = ce4100_i8042_detect; + x86_init.resources.probe_roms = x86_init_noop; + x86_init.mpparse.get_smp_config = x86_init_uint_noop; + x86_init.mpparse.find_smp_config = sdv_find_smp_config; +} diff --git a/arch/x86/platform/iris/Makefile b/arch/x86/platform/iris/Makefile new file mode 100644 index 00000000000..db921983a10 --- /dev/null +++ b/arch/x86/platform/iris/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_X86_32_IRIS) += iris.o diff --git a/arch/x86/platform/iris/iris.c b/arch/x86/platform/iris/iris.c new file mode 100644 index 00000000000..1ba7f5ed8c9 --- /dev/null +++ b/arch/x86/platform/iris/iris.c @@ -0,0 +1,91 @@ +/* + * Eurobraille/Iris power off support. + * + * Eurobraille's Iris machine is a PC with no APM or ACPI support. + * It is shutdown by a special I/O sequence which this module provides. + * + * Copyright (C) Shérab <Sebastien.Hinderer@ens-lyon.org> + * + * This program is free software ; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation ; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY ; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the program ; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/moduleparam.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/pm.h> +#include <asm/io.h> + +#define IRIS_GIO_BASE 0x340 +#define IRIS_GIO_INPUT IRIS_GIO_BASE +#define IRIS_GIO_OUTPUT (IRIS_GIO_BASE + 1) +#define IRIS_GIO_PULSE 0x80 /* First byte to send */ +#define IRIS_GIO_REST 0x00 /* Second byte to send */ +#define IRIS_GIO_NODEV 0xff /* Likely not an Iris */ + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Sébastien Hinderer <Sebastien.Hinderer@ens-lyon.org>"); +MODULE_DESCRIPTION("A power_off handler for Iris devices from EuroBraille"); +MODULE_SUPPORTED_DEVICE("Eurobraille/Iris"); + +static int force; + +module_param(force, bool, 0); +MODULE_PARM_DESC(force, "Set to one to force poweroff handler installation."); + +static void (*old_pm_power_off)(void); + +static void iris_power_off(void) +{ + outb(IRIS_GIO_PULSE, IRIS_GIO_OUTPUT); + msleep(850); + outb(IRIS_GIO_REST, IRIS_GIO_OUTPUT); +} + +/* + * Before installing the power_off handler, try to make sure the OS is + * running on an Iris. Since Iris does not support DMI, this is done + * by reading its input port and seeing whether the read value is + * meaningful. + */ +static int iris_init(void) +{ + unsigned char status; + if (force != 1) { + printk(KERN_ERR "The force parameter has not been set to 1 so the Iris poweroff handler will not be installed.\n"); + return -ENODEV; + } + status = inb(IRIS_GIO_INPUT); + if (status == IRIS_GIO_NODEV) { + printk(KERN_ERR "This machine does not seem to be an Iris. Power_off handler not installed.\n"); + return -ENODEV; + } + old_pm_power_off = pm_power_off; + pm_power_off = &iris_power_off; + printk(KERN_INFO "Iris power_off handler installed.\n"); + + return 0; +} + +static void iris_exit(void) +{ + pm_power_off = old_pm_power_off; + printk(KERN_INFO "Iris power_off handler uninstalled.\n"); +} + +module_init(iris_init); +module_exit(iris_exit); diff --git a/arch/x86/platform/mrst/Makefile b/arch/x86/platform/mrst/Makefile index efbbc552fa9..f61ccdd4934 100644 --- a/arch/x86/platform/mrst/Makefile +++ b/arch/x86/platform/mrst/Makefile @@ -1 +1,3 @@ obj-$(CONFIG_X86_MRST) += mrst.o +obj-$(CONFIG_X86_MRST) += vrtc.o +obj-$(CONFIG_EARLY_PRINTK_MRST) += early_printk_mrst.o diff --git a/arch/x86/kernel/early_printk_mrst.c b/arch/x86/platform/mrst/early_printk_mrst.c index 65df603622b..65df603622b 100644 --- a/arch/x86/kernel/early_printk_mrst.c +++ b/arch/x86/platform/mrst/early_printk_mrst.c diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index 79ae68154e8..fee0b4914e0 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -9,9 +9,19 @@ * as published by the Free Software Foundation; version 2 * of the License. */ + +#define pr_fmt(fmt) "mrst: " fmt + #include <linux/init.h> #include <linux/kernel.h> #include <linux/sfi.h> +#include <linux/intel_pmic_gpio.h> +#include <linux/spi/spi.h> +#include <linux/i2c.h> +#include <linux/i2c/pca953x.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/platform_device.h> #include <linux/irq.h> #include <linux/module.h> @@ -23,7 +33,9 @@ #include <asm/mrst.h> #include <asm/io.h> #include <asm/i8259.h> +#include <asm/intel_scu_ipc.h> #include <asm/apb_timer.h> +#include <asm/reboot.h> /* * the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock, @@ -102,10 +114,10 @@ static int __init sfi_parse_mtmr(struct sfi_table_header *table) memcpy(sfi_mtimer_array, pentry, totallen); } - printk(KERN_INFO "SFI: MTIMER info (num = %d):\n", sfi_mtimer_num); + pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num); pentry = sfi_mtimer_array; for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) { - printk(KERN_INFO "timer[%d]: paddr = 0x%08x, freq = %dHz," + pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz," " irq = %d\n", totallen, (u32)pentry->phys_addr, pentry->freq_hz, pentry->irq); if (!pentry->irq) @@ -176,14 +188,14 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table) memcpy(sfi_mrtc_array, pentry, totallen); } - printk(KERN_INFO "SFI: RTC info (num = %d):\n", sfi_mrtc_num); + pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num); pentry = sfi_mrtc_array; for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) { - printk(KERN_INFO "RTC[%d]: paddr = 0x%08x, irq = %d\n", + pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n", totallen, (u32)pentry->phys_addr, pentry->irq); mp_irq.type = MP_IOAPIC; mp_irq.irqtype = mp_INT; - mp_irq.irqflag = 0; + mp_irq.irqflag = 0xf; /* level trigger and active low */ mp_irq.srcbus = 0; mp_irq.srcbusirq = pentry->irq; /* IRQ */ mp_irq.dstapic = MP_APIC_ALL; @@ -209,6 +221,7 @@ static unsigned long __init mrst_calibrate_tsc(void) void __init mrst_time_init(void) { + sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr); switch (mrst_timer_options) { case MRST_TIMER_APBT_ONLY: break; @@ -224,16 +237,10 @@ void __init mrst_time_init(void) return; } /* we need at least one APB timer */ - sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr); pre_init_apic_IRQ0(); apbt_time_init(); } -void __init mrst_rtc_init(void) -{ - sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc); -} - void __cpuinit mrst_arch_setup(void) { if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27) @@ -256,6 +263,17 @@ static int mrst_i8042_detect(void) return 0; } +/* Reboot and power off are handled by the SCU on a MID device */ +static void mrst_power_off(void) +{ + intel_scu_ipc_simple_command(0xf1, 1); +} + +static void mrst_reboot(void) +{ + intel_scu_ipc_simple_command(0xf1, 0); +} + /* * Moorestown specific x86_init function overrides and early setup * calls. @@ -281,6 +299,10 @@ void __init x86_mrst_early_setup(void) legacy_pic = &null_legacy_pic; + /* Moorestown specific power_off/restart method */ + pm_power_off = mrst_power_off; + machine_ops.emergency_restart = mrst_reboot; + /* Avoid searching for BIOS MP tables */ x86_init.mpparse.find_smp_config = x86_init_noop; x86_init.mpparse.get_smp_config = x86_init_uint_noop; @@ -309,3 +331,505 @@ static inline int __init setup_x86_mrst_timer(char *arg) return 0; } __setup("x86_mrst_timer=", setup_x86_mrst_timer); + +/* + * Parsing GPIO table first, since the DEVS table will need this table + * to map the pin name to the actual pin. + */ +static struct sfi_gpio_table_entry *gpio_table; +static int gpio_num_entry; + +static int __init sfi_parse_gpio(struct sfi_table_header *table) +{ + struct sfi_table_simple *sb; + struct sfi_gpio_table_entry *pentry; + int num, i; + + if (gpio_table) + return 0; + sb = (struct sfi_table_simple *)table; + num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry); + pentry = (struct sfi_gpio_table_entry *)sb->pentry; + + gpio_table = (struct sfi_gpio_table_entry *) + kmalloc(num * sizeof(*pentry), GFP_KERNEL); + if (!gpio_table) + return -1; + memcpy(gpio_table, pentry, num * sizeof(*pentry)); + gpio_num_entry = num; + + pr_debug("GPIO pin info:\n"); + for (i = 0; i < num; i++, pentry++) + pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s," + " pin = %d\n", i, + pentry->controller_name, + pentry->pin_name, + pentry->pin_no); + return 0; +} + +static int get_gpio_by_name(const char *name) +{ + struct sfi_gpio_table_entry *pentry = gpio_table; + int i; + + if (!pentry) + return -1; + for (i = 0; i < gpio_num_entry; i++, pentry++) { + if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN)) + return pentry->pin_no; + } + return -1; +} + +/* + * Here defines the array of devices platform data that IAFW would export + * through SFI "DEVS" table, we use name and type to match the device and + * its platform data. + */ +struct devs_id { + char name[SFI_NAME_LEN + 1]; + u8 type; + u8 delay; + void *(*get_platform_data)(void *info); +}; + +/* the offset for the mapping of global gpio pin to irq */ +#define MRST_IRQ_OFFSET 0x100 + +static void __init *pmic_gpio_platform_data(void *info) +{ + static struct intel_pmic_gpio_platform_data pmic_gpio_pdata; + int gpio_base = get_gpio_by_name("pmic_gpio_base"); + + if (gpio_base == -1) + gpio_base = 64; + pmic_gpio_pdata.gpio_base = gpio_base; + pmic_gpio_pdata.irq_base = gpio_base + MRST_IRQ_OFFSET; + pmic_gpio_pdata.gpiointr = 0xffffeff8; + + return &pmic_gpio_pdata; +} + +static void __init *max3111_platform_data(void *info) +{ + struct spi_board_info *spi_info = info; + int intr = get_gpio_by_name("max3111_int"); + + if (intr == -1) + return NULL; + spi_info->irq = intr + MRST_IRQ_OFFSET; + return NULL; +} + +/* we have multiple max7315 on the board ... */ +#define MAX7315_NUM 2 +static void __init *max7315_platform_data(void *info) +{ + static struct pca953x_platform_data max7315_pdata[MAX7315_NUM]; + static int nr; + struct pca953x_platform_data *max7315 = &max7315_pdata[nr]; + struct i2c_board_info *i2c_info = info; + int gpio_base, intr; + char base_pin_name[SFI_NAME_LEN + 1]; + char intr_pin_name[SFI_NAME_LEN + 1]; + + if (nr == MAX7315_NUM) { + pr_err("too many max7315s, we only support %d\n", + MAX7315_NUM); + return NULL; + } + /* we have several max7315 on the board, we only need load several + * instances of the same pca953x driver to cover them + */ + strcpy(i2c_info->type, "max7315"); + if (nr++) { + sprintf(base_pin_name, "max7315_%d_base", nr); + sprintf(intr_pin_name, "max7315_%d_int", nr); + } else { + strcpy(base_pin_name, "max7315_base"); + strcpy(intr_pin_name, "max7315_int"); + } + + gpio_base = get_gpio_by_name(base_pin_name); + intr = get_gpio_by_name(intr_pin_name); + + if (gpio_base == -1) + return NULL; + max7315->gpio_base = gpio_base; + if (intr != -1) { + i2c_info->irq = intr + MRST_IRQ_OFFSET; + max7315->irq_base = gpio_base + MRST_IRQ_OFFSET; + } else { + i2c_info->irq = -1; + max7315->irq_base = -1; + } + return max7315; +} + +static void __init *emc1403_platform_data(void *info) +{ + static short intr2nd_pdata; + struct i2c_board_info *i2c_info = info; + int intr = get_gpio_by_name("thermal_int"); + int intr2nd = get_gpio_by_name("thermal_alert"); + + if (intr == -1 || intr2nd == -1) + return NULL; + + i2c_info->irq = intr + MRST_IRQ_OFFSET; + intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET; + + return &intr2nd_pdata; +} + +static void __init *lis331dl_platform_data(void *info) +{ + static short intr2nd_pdata; + struct i2c_board_info *i2c_info = info; + int intr = get_gpio_by_name("accel_int"); + int intr2nd = get_gpio_by_name("accel_2"); + + if (intr == -1 || intr2nd == -1) + return NULL; + + i2c_info->irq = intr + MRST_IRQ_OFFSET; + intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET; + + return &intr2nd_pdata; +} + +static void __init *no_platform_data(void *info) +{ + return NULL; +} + +static const struct devs_id __initconst device_ids[] = { + {"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data}, + {"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data}, + {"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, + {"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, + {"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data}, + {"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data}, + {"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data}, + {"msic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data}, + {}, +}; + +#define MAX_IPCDEVS 24 +static struct platform_device *ipc_devs[MAX_IPCDEVS]; +static int ipc_next_dev; + +#define MAX_SCU_SPI 24 +static struct spi_board_info *spi_devs[MAX_SCU_SPI]; +static int spi_next_dev; + +#define MAX_SCU_I2C 24 +static struct i2c_board_info *i2c_devs[MAX_SCU_I2C]; +static int i2c_bus[MAX_SCU_I2C]; +static int i2c_next_dev; + +static void __init intel_scu_device_register(struct platform_device *pdev) +{ + if(ipc_next_dev == MAX_IPCDEVS) + pr_err("too many SCU IPC devices"); + else + ipc_devs[ipc_next_dev++] = pdev; +} + +static void __init intel_scu_spi_device_register(struct spi_board_info *sdev) +{ + struct spi_board_info *new_dev; + + if (spi_next_dev == MAX_SCU_SPI) { + pr_err("too many SCU SPI devices"); + return; + } + + new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL); + if (!new_dev) { + pr_err("failed to alloc mem for delayed spi dev %s\n", + sdev->modalias); + return; + } + memcpy(new_dev, sdev, sizeof(*sdev)); + + spi_devs[spi_next_dev++] = new_dev; +} + +static void __init intel_scu_i2c_device_register(int bus, + struct i2c_board_info *idev) +{ + struct i2c_board_info *new_dev; + + if (i2c_next_dev == MAX_SCU_I2C) { + pr_err("too many SCU I2C devices"); + return; + } + + new_dev = kzalloc(sizeof(*idev), GFP_KERNEL); + if (!new_dev) { + pr_err("failed to alloc mem for delayed i2c dev %s\n", + idev->type); + return; + } + memcpy(new_dev, idev, sizeof(*idev)); + + i2c_bus[i2c_next_dev] = bus; + i2c_devs[i2c_next_dev++] = new_dev; +} + +/* Called by IPC driver */ +void intel_scu_devices_create(void) +{ + int i; + + for (i = 0; i < ipc_next_dev; i++) + platform_device_add(ipc_devs[i]); + + for (i = 0; i < spi_next_dev; i++) + spi_register_board_info(spi_devs[i], 1); + + for (i = 0; i < i2c_next_dev; i++) { + struct i2c_adapter *adapter; + struct i2c_client *client; + + adapter = i2c_get_adapter(i2c_bus[i]); + if (adapter) { + client = i2c_new_device(adapter, i2c_devs[i]); + if (!client) + pr_err("can't create i2c device %s\n", + i2c_devs[i]->type); + } else + i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1); + } +} +EXPORT_SYMBOL_GPL(intel_scu_devices_create); + +/* Called by IPC driver */ +void intel_scu_devices_destroy(void) +{ + int i; + + for (i = 0; i < ipc_next_dev; i++) + platform_device_del(ipc_devs[i]); +} +EXPORT_SYMBOL_GPL(intel_scu_devices_destroy); + +static void __init install_irq_resource(struct platform_device *pdev, int irq) +{ + /* Single threaded */ + static struct resource __initdata res = { + .name = "IRQ", + .flags = IORESOURCE_IRQ, + }; + res.start = irq; + platform_device_add_resources(pdev, &res, 1); +} + +static void __init sfi_handle_ipc_dev(struct platform_device *pdev) +{ + const struct devs_id *dev = device_ids; + void *pdata = NULL; + + while (dev->name[0]) { + if (dev->type == SFI_DEV_TYPE_IPC && + !strncmp(dev->name, pdev->name, SFI_NAME_LEN)) { + pdata = dev->get_platform_data(pdev); + break; + } + dev++; + } + pdev->dev.platform_data = pdata; + intel_scu_device_register(pdev); +} + +static void __init sfi_handle_spi_dev(struct spi_board_info *spi_info) +{ + const struct devs_id *dev = device_ids; + void *pdata = NULL; + + while (dev->name[0]) { + if (dev->type == SFI_DEV_TYPE_SPI && + !strncmp(dev->name, spi_info->modalias, SFI_NAME_LEN)) { + pdata = dev->get_platform_data(spi_info); + break; + } + dev++; + } + spi_info->platform_data = pdata; + if (dev->delay) + intel_scu_spi_device_register(spi_info); + else + spi_register_board_info(spi_info, 1); +} + +static void __init sfi_handle_i2c_dev(int bus, struct i2c_board_info *i2c_info) +{ + const struct devs_id *dev = device_ids; + void *pdata = NULL; + + while (dev->name[0]) { + if (dev->type == SFI_DEV_TYPE_I2C && + !strncmp(dev->name, i2c_info->type, SFI_NAME_LEN)) { + pdata = dev->get_platform_data(i2c_info); + break; + } + dev++; + } + i2c_info->platform_data = pdata; + + if (dev->delay) + intel_scu_i2c_device_register(bus, i2c_info); + else + i2c_register_board_info(bus, i2c_info, 1); + } + + +static int __init sfi_parse_devs(struct sfi_table_header *table) +{ + struct sfi_table_simple *sb; + struct sfi_device_table_entry *pentry; + struct spi_board_info spi_info; + struct i2c_board_info i2c_info; + struct platform_device *pdev; + int num, i, bus; + int ioapic; + struct io_apic_irq_attr irq_attr; + + sb = (struct sfi_table_simple *)table; + num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry); + pentry = (struct sfi_device_table_entry *)sb->pentry; + + for (i = 0; i < num; i++, pentry++) { + if (pentry->irq != (u8)0xff) { /* native RTE case */ + /* these SPI2 devices are not exposed to system as PCI + * devices, but they have separate RTE entry in IOAPIC + * so we have to enable them one by one here + */ + ioapic = mp_find_ioapic(pentry->irq); + irq_attr.ioapic = ioapic; + irq_attr.ioapic_pin = pentry->irq; + irq_attr.trigger = 1; + irq_attr.polarity = 1; + io_apic_set_pci_routing(NULL, pentry->irq, &irq_attr); + } + switch (pentry->type) { + case SFI_DEV_TYPE_IPC: + /* ID as IRQ is a hack that will go away */ + pdev = platform_device_alloc(pentry->name, pentry->irq); + if (pdev == NULL) { + pr_err("out of memory for SFI platform device '%s'.\n", + pentry->name); + continue; + } + install_irq_resource(pdev, pentry->irq); + pr_debug("info[%2d]: IPC bus, name = %16.16s, " + "irq = 0x%2x\n", i, pentry->name, pentry->irq); + sfi_handle_ipc_dev(pdev); + break; + case SFI_DEV_TYPE_SPI: + memset(&spi_info, 0, sizeof(spi_info)); + strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN); + spi_info.irq = pentry->irq; + spi_info.bus_num = pentry->host_num; + spi_info.chip_select = pentry->addr; + spi_info.max_speed_hz = pentry->max_freq; + pr_debug("info[%2d]: SPI bus = %d, name = %16.16s, " + "irq = 0x%2x, max_freq = %d, cs = %d\n", i, + spi_info.bus_num, + spi_info.modalias, + spi_info.irq, + spi_info.max_speed_hz, + spi_info.chip_select); + sfi_handle_spi_dev(&spi_info); + break; + case SFI_DEV_TYPE_I2C: + memset(&i2c_info, 0, sizeof(i2c_info)); + bus = pentry->host_num; + strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN); + i2c_info.irq = pentry->irq; + i2c_info.addr = pentry->addr; + pr_debug("info[%2d]: I2C bus = %d, name = %16.16s, " + "irq = 0x%2x, addr = 0x%x\n", i, bus, + i2c_info.type, + i2c_info.irq, + i2c_info.addr); + sfi_handle_i2c_dev(bus, &i2c_info); + break; + case SFI_DEV_TYPE_UART: + case SFI_DEV_TYPE_HSI: + default: + ; + } + } + return 0; +} + +static int __init mrst_platform_init(void) +{ + sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio); + sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs); + return 0; +} +arch_initcall(mrst_platform_init); + +/* + * we will search these buttons in SFI GPIO table (by name) + * and register them dynamically. Please add all possible + * buttons here, we will shrink them if no GPIO found. + */ +static struct gpio_keys_button gpio_button[] = { + {KEY_POWER, -1, 1, "power_btn", EV_KEY, 0, 3000}, + {KEY_PROG1, -1, 1, "prog_btn1", EV_KEY, 0, 20}, + {KEY_PROG2, -1, 1, "prog_btn2", EV_KEY, 0, 20}, + {SW_LID, -1, 1, "lid_switch", EV_SW, 0, 20}, + {KEY_VOLUMEUP, -1, 1, "vol_up", EV_KEY, 0, 20}, + {KEY_VOLUMEDOWN, -1, 1, "vol_down", EV_KEY, 0, 20}, + {KEY_CAMERA, -1, 1, "camera_full", EV_KEY, 0, 20}, + {KEY_CAMERA_FOCUS, -1, 1, "camera_half", EV_KEY, 0, 20}, + {SW_KEYPAD_SLIDE, -1, 1, "MagSw1", EV_SW, 0, 20}, + {SW_KEYPAD_SLIDE, -1, 1, "MagSw2", EV_SW, 0, 20}, +}; + +static struct gpio_keys_platform_data mrst_gpio_keys = { + .buttons = gpio_button, + .rep = 1, + .nbuttons = -1, /* will fill it after search */ +}; + +static struct platform_device pb_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &mrst_gpio_keys, + }, +}; + +/* + * Shrink the non-existent buttons, register the gpio button + * device if there is some + */ +static int __init pb_keys_init(void) +{ + struct gpio_keys_button *gb = gpio_button; + int i, num, good = 0; + + num = sizeof(gpio_button) / sizeof(struct gpio_keys_button); + for (i = 0; i < num; i++) { + gb[i].gpio = get_gpio_by_name(gb[i].desc); + if (gb[i].gpio == -1) + continue; + + if (i != good) + gb[good] = gb[i]; + good++; + } + + if (good) { + mrst_gpio_keys.nbuttons = good; + return platform_device_register(&pb_device); + } + return 0; +} +late_initcall(pb_keys_init); diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c new file mode 100644 index 00000000000..32cd7edd71a --- /dev/null +++ b/arch/x86/platform/mrst/vrtc.c @@ -0,0 +1,165 @@ +/* + * vrtc.c: Driver for virtual RTC device on Intel MID platform + * + * (C) Copyright 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + * + * Note: + * VRTC is emulated by system controller firmware, the real HW + * RTC is located in the PMIC device. SCU FW shadows PMIC RTC + * in a memory mapped IO space that is visible to the host IA + * processor. + * + * This driver is based on RTC CMOS driver. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sfi.h> +#include <linux/platform_device.h> + +#include <asm/mrst.h> +#include <asm/mrst-vrtc.h> +#include <asm/time.h> +#include <asm/fixmap.h> + +static unsigned char __iomem *vrtc_virt_base; + +unsigned char vrtc_cmos_read(unsigned char reg) +{ + unsigned char retval; + + /* vRTC's registers range from 0x0 to 0xD */ + if (reg > 0xd || !vrtc_virt_base) + return 0xff; + + lock_cmos_prefix(reg); + retval = __raw_readb(vrtc_virt_base + (reg << 2)); + lock_cmos_suffix(reg); + return retval; +} +EXPORT_SYMBOL_GPL(vrtc_cmos_read); + +void vrtc_cmos_write(unsigned char val, unsigned char reg) +{ + if (reg > 0xd || !vrtc_virt_base) + return; + + lock_cmos_prefix(reg); + __raw_writeb(val, vrtc_virt_base + (reg << 2)); + lock_cmos_suffix(reg); +} +EXPORT_SYMBOL_GPL(vrtc_cmos_write); + +unsigned long vrtc_get_time(void) +{ + u8 sec, min, hour, mday, mon; + u32 year; + + while ((vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP)) + cpu_relax(); + + sec = vrtc_cmos_read(RTC_SECONDS); + min = vrtc_cmos_read(RTC_MINUTES); + hour = vrtc_cmos_read(RTC_HOURS); + mday = vrtc_cmos_read(RTC_DAY_OF_MONTH); + mon = vrtc_cmos_read(RTC_MONTH); + year = vrtc_cmos_read(RTC_YEAR); + + /* vRTC YEAR reg contains the offset to 1960 */ + year += 1960; + + printk(KERN_INFO "vRTC: sec: %d min: %d hour: %d day: %d " + "mon: %d year: %d\n", sec, min, hour, mday, mon, year); + + return mktime(year, mon, mday, hour, min, sec); +} + +/* Only care about the minutes and seconds */ +int vrtc_set_mmss(unsigned long nowtime) +{ + int real_sec, real_min; + int vrtc_min; + + vrtc_min = vrtc_cmos_read(RTC_MINUTES); + + real_sec = nowtime % 60; + real_min = nowtime / 60; + if (((abs(real_min - vrtc_min) + 15)/30) & 1) + real_min += 30; + real_min %= 60; + + vrtc_cmos_write(real_sec, RTC_SECONDS); + vrtc_cmos_write(real_min, RTC_MINUTES); + return 0; +} + +void __init mrst_rtc_init(void) +{ + unsigned long rtc_paddr; + void __iomem *virt_base; + + sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc); + if (!sfi_mrtc_num) + return; + + rtc_paddr = sfi_mrtc_array[0].phys_addr; + + /* vRTC's register address may not be page aligned */ + set_fixmap_nocache(FIX_LNW_VRTC, rtc_paddr); + + virt_base = (void __iomem *)__fix_to_virt(FIX_LNW_VRTC); + virt_base += rtc_paddr & ~PAGE_MASK; + vrtc_virt_base = virt_base; + + x86_platform.get_wallclock = vrtc_get_time; + x86_platform.set_wallclock = vrtc_set_mmss; +} + +/* + * The Moorestown platform has a memory mapped virtual RTC device that emulates + * the programming interface of the RTC. + */ + +static struct resource vrtc_resources[] = { + [0] = { + .flags = IORESOURCE_MEM, + }, + [1] = { + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device vrtc_device = { + .name = "rtc_mrst", + .id = -1, + .resource = vrtc_resources, + .num_resources = ARRAY_SIZE(vrtc_resources), +}; + +/* Register the RTC device if appropriate */ +static int __init mrst_device_create(void) +{ + /* No Moorestown, no device */ + if (!mrst_identify_cpu()) + return -ENODEV; + /* No timer, no device */ + if (!sfi_mrtc_num) + return -ENODEV; + + /* iomem resource */ + vrtc_resources[0].start = sfi_mrtc_array[0].phys_addr; + vrtc_resources[0].end = sfi_mrtc_array[0].phys_addr + + MRST_VRTC_MAP_SZ; + /* irq resource */ + vrtc_resources[1].start = sfi_mrtc_array[0].irq; + vrtc_resources[1].end = sfi_mrtc_array[0].irq; + + return platform_device_register(&vrtc_device); +} + +module_init(mrst_device_create); diff --git a/arch/x86/platform/sfi/sfi.c b/arch/x86/platform/sfi/sfi.c index dd4c281ffe5..ca54875ac79 100644 --- a/arch/x86/platform/sfi/sfi.c +++ b/arch/x86/platform/sfi/sfi.c @@ -48,9 +48,9 @@ static void __init mp_sfi_register_lapic_address(unsigned long address) /* All CPUs enumerated by SFI must be present and enabled */ static void __cpuinit mp_sfi_register_lapic(u8 id) { - if (MAX_APICS - id <= 0) { + if (MAX_LOCAL_APIC - id <= 0) { pr_warning("Processor #%d invalid (max %d)\n", - id, MAX_APICS); + id, MAX_LOCAL_APIC); return; } diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c index ba9caa808a9..df58e9cad96 100644 --- a/arch/x86/platform/uv/tlb_uv.c +++ b/arch/x86/platform/uv/tlb_uv.c @@ -1341,7 +1341,7 @@ uv_activation_descriptor_init(int node, int pnode) /* * each bau_desc is 64 bytes; there are 8 (UV_ITEMS_PER_DESCRIPTOR) - * per cpu; and up to 32 (UV_ADP_SIZE) cpu's per uvhub + * per cpu; and one per cpu on the uvhub (UV_ADP_SIZE) */ bau_desc = kmalloc_node(sizeof(struct bau_desc) * UV_ADP_SIZE * UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node); @@ -1490,7 +1490,7 @@ calculate_destination_timeout(void) /* * initialize the bau_control structure for each cpu */ -static void __init uv_init_per_cpu(int nuvhubs) +static int __init uv_init_per_cpu(int nuvhubs) { int i; int cpu; @@ -1507,7 +1507,7 @@ static void __init uv_init_per_cpu(int nuvhubs) struct bau_control *smaster = NULL; struct socket_desc { short num_cpus; - short cpu_number[16]; + short cpu_number[MAX_CPUS_PER_SOCKET]; }; struct uvhub_desc { unsigned short socket_mask; @@ -1540,6 +1540,10 @@ static void __init uv_init_per_cpu(int nuvhubs) sdp = &bdp->socket[socket]; sdp->cpu_number[sdp->num_cpus] = cpu; sdp->num_cpus++; + if (sdp->num_cpus > MAX_CPUS_PER_SOCKET) { + printk(KERN_EMERG "%d cpus per socket invalid\n", sdp->num_cpus); + return 1; + } } for (uvhub = 0; uvhub < nuvhubs; uvhub++) { if (!(*(uvhub_mask + (uvhub/8)) & (1 << (uvhub%8)))) @@ -1570,6 +1574,12 @@ static void __init uv_init_per_cpu(int nuvhubs) bcp->uvhub_master = hmaster; bcp->uvhub_cpu = uv_cpu_hub_info(cpu)-> blade_processor_id; + if (bcp->uvhub_cpu >= MAX_CPUS_PER_UVHUB) { + printk(KERN_EMERG + "%d cpus per uvhub invalid\n", + bcp->uvhub_cpu); + return 1; + } } nextsocket: socket++; @@ -1595,6 +1605,7 @@ nextsocket: bcp->congested_reps = congested_reps; bcp->congested_period = congested_period; } + return 0; } /* @@ -1625,7 +1636,10 @@ static int __init uv_bau_init(void) spin_lock_init(&disable_lock); congested_cycles = microsec_2_cycles(congested_response_us); - uv_init_per_cpu(nuvhubs); + if (uv_init_per_cpu(nuvhubs)) { + nobau = 1; + return 0; + } uv_partition_base_pnode = 0x7fffffff; for (uvhub = 0; uvhub < nuvhubs; uvhub++) diff --git a/arch/x86/platform/visws/visws_quirks.c b/arch/x86/platform/visws/visws_quirks.c index 3371bd053b8..63203767174 100644 --- a/arch/x86/platform/visws/visws_quirks.c +++ b/arch/x86/platform/visws/visws_quirks.c @@ -171,7 +171,7 @@ static void __init MP_processor_info(struct mpc_cpu *m) ver = m->apicver; if ((ver >= 0x14 && m->apicid >= 0xff) || m->apicid >= 0xf) { printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n", - m->apicid, MAX_APICS); + m->apicid, MAX_LOCAL_APIC); return; } |