summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig10
-rw-r--r--arch/arm/boot/compressed/misc.c6
-rw-r--r--arch/arm/common/scoop.c6
-rw-r--r--arch/arm/kernel/armksyms.c4
-rw-r--r--arch/arm/kernel/entry-armv.S7
-rw-r--r--arch/arm/kernel/irq.c3
-rw-r--r--arch/arm/kernel/smp.c42
-rw-r--r--arch/arm/mach-pxa/corgi.c48
-rw-r--r--arch/arm/mach-pxa/poodle.c32
-rw-r--r--arch/arm/mach-pxa/spitz.c95
-rw-r--r--arch/arm/mach-pxa/time.c8
-rw-r--r--arch/arm/mach-pxa/tosa.c152
-rw-r--r--arch/arm/mach-realview/core.c5
-rw-r--r--arch/arm/mach-realview/platsmp.c10
-rw-r--r--arch/arm/mach-s3c2410/Kconfig8
-rw-r--r--arch/arm/mach-s3c2410/mach-bast.c73
-rw-r--r--arch/arm/mach-s3c2410/mach-vr1000.c56
-rw-r--r--arch/arm/mach-sa1100/time.c8
18 files changed, 477 insertions, 96 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 91d5ef3397b..3bfef0934c9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -356,6 +356,16 @@ config HOTPLUG_CPU
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
+config LOCAL_TIMERS
+ bool "Use local timer interrupts"
+ depends on SMP && n
+ default y
+ help
+ Enable support for local timers on SMP platforms, rather then the
+ legacy IPI broadcast method. Local timers allows the system
+ accounting to be spread across the timer interval, preventing a
+ "thundering herd" at every timer tick.
+
config PREEMPT
bool "Preemptible Kernel (EXPERIMENTAL)"
depends on EXPERIMENTAL
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 50f13eec6cd..5ab94584bae 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -283,8 +283,14 @@ void flush_window(void)
putstr(".");
}
+#ifndef arch_error
+#define arch_error(x)
+#endif
+
static void error(char *x)
{
+ arch_error(x);
+
putstr("\n\n");
putstr(x);
putstr("\n\n -- System halted");
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index bb4eff61441..c7fdf390cef 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -19,12 +19,6 @@
#define SCOOP_REG(d,adr) (*(volatile unsigned short*)(d +(adr)))
-/* PCMCIA to Scoop linkage structures for pxa2xx_sharpsl.c
- There is no easy way to link multiple scoop devices into one
- single entity for the pxa2xx_pcmcia device */
-int scoop_num;
-struct scoop_pcmcia_dev *scoop_devs;
-
struct scoop_dev {
void *base;
spinlock_t scoop_lock;
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 7b17a87a331..7a3261f0bf7 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -9,6 +9,7 @@
*/
#include <linux/module.h>
#include <linux/string.h>
+#include <linux/cryptohash.h>
#include <linux/delay.h>
#include <linux/in6.h>
#include <linux/syscalls.h>
@@ -126,6 +127,9 @@ EXPORT_SYMBOL(__put_user_2);
EXPORT_SYMBOL(__put_user_4);
EXPORT_SYMBOL(__put_user_8);
+ /* crypto hash */
+EXPORT_SYMBOL(sha_transform);
+
/* gcc lib functions */
EXPORT_SYMBOL(__ashldi3);
EXPORT_SYMBOL(__ashrdi3);
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index a511ec5b11a..d9fb819bf7c 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -47,6 +47,13 @@
movne r0, sp
adrne lr, 1b
bne do_IPI
+
+#ifdef CONFIG_LOCAL_TIMERS
+ test_for_ltirq r0, r6, r5, lr
+ movne r0, sp
+ adrne lr, 1b
+ bne do_local_timer
+#endif
#endif
.endm
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 9def4404e1f..d7099dbbb87 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -264,6 +264,7 @@ unlock:
#endif
#ifdef CONFIG_SMP
show_ipi_list(p);
+ show_local_irqs(p);
#endif
seq_printf(p, "Err: %10lu\n", irq_err_count);
}
@@ -995,7 +996,7 @@ void __init init_irq_proc(void)
struct proc_dir_entry *dir;
int irq;
- dir = proc_mkdir("irq", 0);
+ dir = proc_mkdir("irq", NULL);
if (!dir)
return;
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index edb5a406922..77e2e9ca89f 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -142,7 +142,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
ret = -EIO;
}
- secondary_data.stack = 0;
+ secondary_data.stack = NULL;
secondary_data.pgdir = 0;
*pmd_offset(pgd, PHYS_OFFSET) = __pmd(0);
@@ -185,6 +185,11 @@ int __cpuexit __cpu_disable(void)
migrate_irqs();
/*
+ * Stop the local timer for this CPU.
+ */
+ local_timer_stop(cpu);
+
+ /*
* Flush user cache and TLB mappings, and then remove this CPU
* from the vm mask set of all processes.
*/
@@ -290,6 +295,11 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
cpu_set(cpu, cpu_online_map);
/*
+ * Setup local timer for this CPU.
+ */
+ local_timer_setup(cpu);
+
+ /*
* OK, it's off to the idle thread for us
*/
cpu_idle();
@@ -359,8 +369,8 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
* You must not call this function with disabled interrupts, from a
* hardware interrupt handler, nor from a bottom half handler.
*/
-int smp_call_function_on_cpu(void (*func)(void *info), void *info, int retry,
- int wait, cpumask_t callmap)
+static int smp_call_function_on_cpu(void (*func)(void *info), void *info,
+ int retry, int wait, cpumask_t callmap)
{
struct smp_call_struct data;
unsigned long timeout;
@@ -454,6 +464,18 @@ void show_ipi_list(struct seq_file *p)
seq_putc(p, '\n');
}
+void show_local_irqs(struct seq_file *p)
+{
+ unsigned int cpu;
+
+ seq_printf(p, "LOC: ");
+
+ for_each_present_cpu(cpu)
+ seq_printf(p, "%10u ", irq_stat[cpu].local_timer_irqs);
+
+ seq_putc(p, '\n');
+}
+
static void ipi_timer(struct pt_regs *regs)
{
int user = user_mode(regs);
@@ -464,6 +486,18 @@ static void ipi_timer(struct pt_regs *regs)
irq_exit();
}
+#ifdef CONFIG_LOCAL_TIMERS
+asmlinkage void do_local_timer(struct pt_regs *regs)
+{
+ int cpu = smp_processor_id();
+
+ if (local_timer_ack()) {
+ irq_stat[cpu].local_timer_irqs++;
+ ipi_timer(regs);
+ }
+}
+#endif
+
/*
* ipi_call_function - handle IPI from smp_call_function()
*
@@ -515,7 +549,7 @@ static void ipi_cpu_stop(unsigned int cpu)
*
* Bit 0 - Inter-processor function call
*/
-void do_IPI(struct pt_regs *regs)
+asmlinkage void do_IPI(struct pt_regs *regs)
{
unsigned int cpu = smp_processor_id();
struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index eb5f6d744a4..100fb31b515 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -62,6 +62,37 @@ static struct scoop_config corgi_scoop_setup = {
.io_out = CORGI_SCOOP_IO_OUT,
};
+struct platform_device corgiscoop_device = {
+ .name = "sharp-scoop",
+ .id = -1,
+ .dev = {
+ .platform_data = &corgi_scoop_setup,
+ },
+ .num_resources = ARRAY_SIZE(corgi_scoop_resources),
+ .resource = corgi_scoop_resources,
+};
+
+static void corgi_pcmcia_init(void)
+{
+ /* Setup default state of GPIO outputs
+ before we enable them as outputs. */
+ GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
+ GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
+ GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
+ GPIO_bit(GPIO53_nPCE_2);
+
+ pxa_gpio_mode(GPIO48_nPOE_MD);
+ pxa_gpio_mode(GPIO49_nPWE_MD);
+ pxa_gpio_mode(GPIO50_nPIOR_MD);
+ pxa_gpio_mode(GPIO51_nPIOW_MD);
+ pxa_gpio_mode(GPIO55_nPREG_MD);
+ pxa_gpio_mode(GPIO56_nPWAIT_MD);
+ pxa_gpio_mode(GPIO57_nIOIS16_MD);
+ pxa_gpio_mode(GPIO52_nPCE_1_MD);
+ pxa_gpio_mode(GPIO53_nPCE_2_MD);
+ pxa_gpio_mode(GPIO54_pSKTSEL_MD);
+}
+
static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
{
.dev = &corgiscoop_device.dev,
@@ -71,16 +102,14 @@ static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
},
};
-struct platform_device corgiscoop_device = {
- .name = "sharp-scoop",
- .id = -1,
- .dev = {
- .platform_data = &corgi_scoop_setup,
- },
- .num_resources = ARRAY_SIZE(corgi_scoop_resources),
- .resource = corgi_scoop_resources,
+static struct scoop_pcmcia_config corgi_pcmcia_config = {
+ .devs = &corgi_pcmcia_scoop[0],
+ .num_devs = 1,
+ .pcmcia_init = corgi_pcmcia_init,
};
+EXPORT_SYMBOL(corgiscoop_device);
+
/*
* Corgi SSP Device
@@ -294,8 +323,7 @@ static void __init corgi_init(void)
pxa_set_mci_info(&corgi_mci_platform_data);
pxa_set_ficp_info(&corgi_ficp_platform_data);
- scoop_num = 1;
- scoop_devs = &corgi_pcmcia_scoop[0];
+ platform_scoop_config = &corgi_pcmcia_config;
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index ad6a13f95a6..eef3de26ad3 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -65,6 +65,27 @@ struct platform_device poodle_scoop_device = {
.resource = poodle_scoop_resources,
};
+static void poodle_pcmcia_init(void)
+{
+ /* Setup default state of GPIO outputs
+ before we enable them as outputs. */
+ GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
+ GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
+ GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
+ GPIO_bit(GPIO53_nPCE_2);
+
+ pxa_gpio_mode(GPIO48_nPOE_MD);
+ pxa_gpio_mode(GPIO49_nPWE_MD);
+ pxa_gpio_mode(GPIO50_nPIOR_MD);
+ pxa_gpio_mode(GPIO51_nPIOW_MD);
+ pxa_gpio_mode(GPIO55_nPREG_MD);
+ pxa_gpio_mode(GPIO56_nPWAIT_MD);
+ pxa_gpio_mode(GPIO57_nIOIS16_MD);
+ pxa_gpio_mode(GPIO52_nPCE_1_MD);
+ pxa_gpio_mode(GPIO53_nPCE_2_MD);
+ pxa_gpio_mode(GPIO54_pSKTSEL_MD);
+}
+
static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
{
.dev = &poodle_scoop_device.dev,
@@ -74,6 +95,14 @@ static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
},
};
+static struct scoop_pcmcia_config poodle_pcmcia_config = {
+ .devs = &poodle_pcmcia_scoop[0],
+ .num_devs = 1,
+ .pcmcia_init = poodle_pcmcia_init,
+};
+
+EXPORT_SYMBOL(poodle_scoop_device);
+
/* LoCoMo device */
static struct resource locomo_resources[] = {
@@ -268,8 +297,7 @@ static void __init poodle_init(void)
pxa_set_mci_info(&poodle_mci_platform_data);
pxa_set_ficp_info(&poodle_ficp_platform_data);
- scoop_num = 1;
- scoop_devs = &poodle_pcmcia_scoop[0];
+ platform_scoop_config = &poodle_pcmcia_config;
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret) {
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 6c6878cd220..4e9a699ee42 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -104,6 +104,66 @@ struct platform_device spitzscoop2_device = {
.resource = spitz_scoop2_resources,
};
+#define SPITZ_PWR_SD 0x01
+#define SPITZ_PWR_CF 0x02
+
+/* Power control is shared with between one of the CF slots and SD */
+static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
+{
+ unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
+
+ if (new_cpr & 0x0007) {
+ set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
+ if (!(cpr & 0x0002) && !(cpr & 0x0004))
+ mdelay(5);
+ if (device == SPITZ_PWR_CF)
+ cpr |= 0x0002;
+ if (device == SPITZ_PWR_SD)
+ cpr |= 0x0004;
+ write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
+ } else {
+ if (device == SPITZ_PWR_CF)
+ cpr &= ~0x0002;
+ if (device == SPITZ_PWR_SD)
+ cpr &= ~0x0004;
+ write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
+ if (!(cpr & 0x0002) && !(cpr & 0x0004)) {
+ mdelay(1);
+ reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
+ }
+ }
+}
+
+static void spitz_pcmcia_init(void)
+{
+ /* Setup default state of GPIO outputs
+ before we enable them as outputs. */
+ GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
+ GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
+ GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO54_nPCE_2);
+ GPSR(GPIO85_nPCE_1) = GPIO_bit(GPIO85_nPCE_1);
+
+ pxa_gpio_mode(GPIO48_nPOE_MD);
+ pxa_gpio_mode(GPIO49_nPWE_MD);
+ pxa_gpio_mode(GPIO50_nPIOR_MD);
+ pxa_gpio_mode(GPIO51_nPIOW_MD);
+ pxa_gpio_mode(GPIO55_nPREG_MD);
+ pxa_gpio_mode(GPIO56_nPWAIT_MD);
+ pxa_gpio_mode(GPIO57_nIOIS16_MD);
+ pxa_gpio_mode(GPIO85_nPCE_1_MD);
+ pxa_gpio_mode(GPIO54_nPCE_2_MD);
+ pxa_gpio_mode(GPIO104_pSKTSEL_MD);
+}
+
+static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr)
+{
+ /* Only need to override behaviour for slot 0 */
+ if (nr == 0)
+ spitz_card_pwr_ctrl(SPITZ_PWR_CF, cpr);
+ else
+ write_scoop_reg(scoop, SCOOP_CPR, cpr);
+}
+
static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
{
.dev = &spitzscoop_device.dev,
@@ -117,6 +177,16 @@ static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
},
};
+static struct scoop_pcmcia_config spitz_pcmcia_config = {
+ .devs = &spitz_pcmcia_scoop[0],
+ .num_devs = 2,
+ .pcmcia_init = spitz_pcmcia_init,
+ .power_ctrl = spitz_pcmcia_pwr,
+};
+
+EXPORT_SYMBOL(spitzscoop_device);
+EXPORT_SYMBOL(spitzscoop2_device);
+
/*
* Spitz SSP Device
@@ -235,27 +305,14 @@ static int spitz_mci_init(struct device *dev, irqreturn_t (*spitz_detect_int)(in
return 0;
}
-/* Power control is shared with one of the CF slots so we have a mess */
static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
- unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
-
- if (( 1 << vdd) & p_d->ocr_mask) {
- /* printk(KERN_DEBUG "%s: on\n", __FUNCTION__); */
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
- mdelay(2);
- write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | 0x04);
- } else {
- /* printk(KERN_DEBUG "%s: off\n", __FUNCTION__); */
- write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr & ~0x04);
-
- if (!(cpr | 0x02)) {
- mdelay(1);
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
- }
- }
+ if (( 1 << vdd) & p_d->ocr_mask)
+ spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0004);
+ else
+ spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000);
}
static int spitz_mci_get_ro(struct device *dev)
@@ -351,8 +408,8 @@ static void __init common_init(void)
static void __init spitz_init(void)
{
- scoop_num = 2;
- scoop_devs = &spitz_pcmcia_scoop[0];
+ platform_scoop_config = &spitz_pcmcia_config;
+
spitz_bl_machinfo.set_bl_intensity = spitz_bl_set_intensity;
common_init();
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 7dad3f1465e..b9b2057349e 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -132,11 +132,13 @@ static void __init pxa_timer_init(void)
tv.tv_sec = pxa_get_rtc_time();
do_settimeofday(&tv);
- OSMR0 = 0; /* set initial match at 0 */
+ OIER = 0; /* disable any timer interrupts */
+ OSCR = LATCH*2; /* push OSCR out of the way */
+ OSMR0 = LATCH; /* set initial match */
OSSR = 0xf; /* clear status on all timers */
setup_irq(IRQ_OST0, &pxa_timer_irq);
- OIER |= OIER_E0; /* enable match on timer 0 to cause interrupts */
- OSCR = 0; /* initialize free-running timer, force first match */
+ OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */
+ OSCR = 0; /* initialize free-running timer */
}
#ifdef CONFIG_NO_IDLE_HZ
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 400609f8b6a..c312054dfb8 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -98,6 +98,9 @@ struct platform_device tosascoop_jc_device = {
.resource = tosa_scoop_jc_resources,
};
+/*
+ * PCMCIA
+ */
static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
{
.dev = &tosascoop_device.dev,
@@ -111,16 +114,155 @@ static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
},
};
+static void tosa_pcmcia_init(void)
+{
+ /* Setup default state of GPIO outputs
+ before we enable them as outputs. */
+ GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
+ GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
+ GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
+ GPIO_bit(GPIO53_nPCE_2);
+
+ pxa_gpio_mode(GPIO48_nPOE_MD);
+ pxa_gpio_mode(GPIO49_nPWE_MD);
+ pxa_gpio_mode(GPIO50_nPIOR_MD);
+ pxa_gpio_mode(GPIO51_nPIOW_MD);
+ pxa_gpio_mode(GPIO55_nPREG_MD);
+ pxa_gpio_mode(GPIO56_nPWAIT_MD);
+ pxa_gpio_mode(GPIO57_nIOIS16_MD);
+ pxa_gpio_mode(GPIO52_nPCE_1_MD);
+ pxa_gpio_mode(GPIO53_nPCE_2_MD);
+ pxa_gpio_mode(GPIO54_pSKTSEL_MD);
+}
+
+static struct scoop_pcmcia_config tosa_pcmcia_config = {
+ .devs = &tosa_pcmcia_scoop[0],
+ .num_devs = 2,
+ .pcmcia_init = tosa_pcmcia_init,
+};
+
+/*
+ * USB Device Controller
+ */
+static void tosa_udc_command(int cmd)
+{
+ switch(cmd) {
+ case PXA2XX_UDC_CMD_CONNECT:
+ set_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP);
+ break;
+ case PXA2XX_UDC_CMD_DISCONNECT:
+ reset_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP);
+ break;
+ }
+}
+
+static int tosa_udc_is_connected(void)
+{
+ return ((GPLR(TOSA_GPIO_USB_IN) & GPIO_bit(TOSA_GPIO_USB_IN)) == 0);
+}
+
+
+static struct pxa2xx_udc_mach_info udc_info __initdata = {
+ .udc_command = tosa_udc_command,
+ .udc_is_connected = tosa_udc_is_connected,
+};
+
+/*
+ * MMC/SD Device
+ */
+static struct pxamci_platform_data tosa_mci_platform_data;
+
+static int tosa_mci_init(struct device *dev, irqreturn_t (*tosa_detect_int)(int, void *, struct pt_regs *), void *data)
+{
+ int err;
+
+ /* setup GPIO for PXA25x MMC controller */
+ pxa_gpio_mode(GPIO6_MMCCLK_MD);
+ pxa_gpio_mode(GPIO8_MMCCS0_MD);
+ pxa_gpio_mode(TOSA_GPIO_nSD_DETECT | GPIO_IN);
+
+ tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+
+ err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, SA_INTERRUPT,
+ "MMC/SD card detect", data);
+ if (err) {
+ printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+ return -1;
+ }
+
+ set_irq_type(TOSA_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE);
+
+ return 0;
+}
+
+static void tosa_mci_setpower(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data* p_d = dev->platform_data;
+
+ if (( 1 << vdd) & p_d->ocr_mask) {
+ set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON);
+ } else {
+ reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON);
+ }
+}
+
+static int tosa_mci_get_ro(struct device *dev)
+{
+ return (read_scoop_reg(&tosascoop_device.dev, SCOOP_GPWR)&TOSA_SCOOP_SD_WP);
+}
+
+static void tosa_mci_exit(struct device *dev, void *data)
+{
+ free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
+}
+
+static struct pxamci_platform_data tosa_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = tosa_mci_init,
+ .get_ro = tosa_mci_get_ro,
+ .setpower = tosa_mci_setpower,
+ .exit = tosa_mci_exit,
+};
+
+/*
+ * Irda
+ */
+static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+{
+ if (mode & IR_OFF) {
+ reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN);
+ pxa_gpio_mode(GPIO47_STTXD|GPIO_DFLT_LOW);
+ pxa_gpio_mode(GPIO47_STTXD|GPIO_OUT);
+ } else {
+ pxa_gpio_mode(GPIO47_STTXD_MD);
+ set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN);
+ }
+}
+
+static struct pxaficp_platform_data tosa_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = tosa_irda_transceiver_mode,
+};
+
+/*
+ * Tosa Keyboard
+ */
+static struct platform_device tosakbd_device = {
+ .name = "tosa-keyboard",
+ .id = -1,
+};
static struct platform_device *devices[] __initdata = {
&tosascoop_device,
&tosascoop_jc_device,
+ &tosakbd_device,
};
static void __init tosa_init(void)
{
pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN);
pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN);
+ pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN);
/* setup sleep mode values */
PWER = 0x00000002;
@@ -131,13 +273,15 @@ static void __init tosa_init(void)
PGSR2 = 0x00014000;
PCFR |= PCFR_OPDE;
- // enable batt_fault
+ /* enable batt_fault */
PMCR = 0x01;
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ pxa_set_mci_info(&tosa_mci_platform_data);
+ pxa_set_udc_info(&udc_info);
+ pxa_set_ficp_info(&tosa_ficp_platform_data);
+ platform_scoop_config = &tosa_pcmcia_config;
- scoop_num = 2;
- scoop_devs = &tosa_pcmcia_scoop[0];
+ platform_add_devices(devices, ARRAY_SIZE(devices));
}
static void __init fixup_tosa(struct machine_desc *desc,
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 482eb512ebe..4ea60d8b6e3 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -550,6 +550,11 @@ static irqreturn_t realview_timer_interrupt(int irq, void *dev_id, struct pt_reg
timer_tick(regs);
+#ifdef CONFIG_SMP
+ smp_send_timer();
+ update_process_times(user_mode(regs));
+#endif
+
write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 9844644d0fb..09b35f62247 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -32,7 +32,7 @@ static unsigned int __init get_core_count(void)
{
unsigned int ncores;
- ncores = __raw_readl(IO_ADDRESS(REALVIEW_MPCORE_SCU_BASE) + SCU_CONFIG);
+ ncores = __raw_readl(__io_address(REALVIEW_MPCORE_SCU_BASE) + SCU_CONFIG);
return (ncores & 0x03) + 1;
}
@@ -133,12 +133,12 @@ static void __init poke_milo(void)
#if 1
#define REALVIEW_SYS_FLAGSS_OFFSET 0x30
__raw_writel(virt_to_phys(realview_secondary_startup),
- (IO_ADDRESS(REALVIEW_SYS_BASE) +
- REALVIEW_SYS_FLAGSS_OFFSET));
+ __io_address(REALVIEW_SYS_BASE) +
+ REALVIEW_SYS_FLAGSS_OFFSET);
#define REALVIEW_SYS_FLAGSC_OFFSET 0x34
__raw_writel(3,
- (IO_ADDRESS(REALVIEW_SYS_BASE) +
- REALVIEW_SYS_FLAGSC_OFFSET));
+ __io_address(REALVIEW_SYS_BASE) +
+ REALVIEW_SYS_FLAGSC_OFFSET);
#endif
mb();
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index c796bcdd615..0b9d7ca49ec 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -121,6 +121,14 @@ config S3C2410_BOOT_WATCHDOG
system resets depends on the value of PCLK. The timeout on an
200MHz s3c2410 should be about 30 seconds.
+config S3C2410_BOOT_ERROR_RESET
+ bool "S3C2410 Reboot on decompression error"
+ depends on ARCH_S3C2410
+ help
+ Say y here to use the watchdog to reset the system if the
+ kernel decompressor detects an error during decompression.
+
+
comment "S3C2410 Setup"
config S3C2410_DMA
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 0b71c896bbd..1be2567a748 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -89,32 +89,63 @@
/* macros to modify the physical addresses for io space */
-#define PA_CS2(item) ((item) + S3C2410_CS2)
-#define PA_CS3(item) ((item) + S3C2410_CS3)
-#define PA_CS4(item) ((item) + S3C2410_CS4)
-#define PA_CS5(item) ((item) + S3C2410_CS5)
+#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
+#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
+#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
+#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
static struct map_desc bast_iodesc[] __initdata = {
/* ISA IO areas */
-
- { (u32)S3C24XX_VA_ISA_BYTE, PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
- { (u32)S3C24XX_VA_ISA_WORD, PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
-
- /* we could possibly compress the next set down into a set of smaller tables
- * pagetables, but that would mean using an L2 section, and it still means
- * we cannot actually feed the same register to an LDR due to 16K spacing
- */
-
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = PA_CS2(BAST_PA_ISAIO),
+ .length = SZ_16M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = PA_CS3(BAST_PA_ISAIO),
+ .length = SZ_16M,
+ .type = MT_DEVICE,
+ },
/* bast CPLD control registers, and external interrupt controls */
- { (u32)BAST_VA_CTRL1, BAST_PA_CTRL1, SZ_1M, MT_DEVICE },
- { (u32)BAST_VA_CTRL2, BAST_PA_CTRL2, SZ_1M, MT_DEVICE },
- { (u32)BAST_VA_CTRL3, BAST_PA_CTRL3, SZ_1M, MT_DEVICE },
- { (u32)BAST_VA_CTRL4, BAST_PA_CTRL4, SZ_1M, MT_DEVICE },
-
+ {
+ .virtual = (u32)BAST_VA_CTRL1,
+ .pfn = __phys_to_pfn(BAST_PA_CTRL1),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)BAST_VA_CTRL2,
+ .pfn = __phys_to_pfn(BAST_PA_CTRL2),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)BAST_VA_CTRL3,
+ .pfn = __phys_to_pfn(BAST_PA_CTRL3),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)BAST_VA_CTRL4,
+ .pfn = __phys_to_pfn(BAST_PA_CTRL4),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
/* PC104 IRQ mux */
- { (u32)BAST_VA_PC104_IRQREQ, BAST_PA_PC104_IRQREQ, SZ_1M, MT_DEVICE },
- { (u32)BAST_VA_PC104_IRQRAW, BAST_PA_PC104_IRQRAW, SZ_1M, MT_DEVICE },
- { (u32)BAST_VA_PC104_IRQMASK, BAST_PA_PC104_IRQMASK, SZ_1M, MT_DEVICE },
+ {
+ .virtual = (u32)BAST_VA_PC104_IRQREQ,
+ .pfn = __phys_to_pfn(BAST_PA_PC104_IRQREQ),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)BAST_VA_PC104_IRQRAW,
+ .pfn = __phys_to_pfn(BAST_PA_PC104_IRQRAW),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)BAST_VA_PC104_IRQMASK,
+ .pfn = __phys_to_pfn(BAST_PA_PC104_IRQMASK),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
/* peripheral space... one for each of fast/slow/byte/16bit */
/* note, ide is only decoded in word space, even though some registers
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 46b259673c1..ae7e099bf6c 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -74,27 +74,47 @@
/* macros to modify the physical addresses for io space */
-#define PA_CS2(item) ((item) + S3C2410_CS2)
-#define PA_CS3(item) ((item) + S3C2410_CS3)
-#define PA_CS4(item) ((item) + S3C2410_CS4)
-#define PA_CS5(item) ((item) + S3C2410_CS5)
+#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
+#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
+#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
+#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
static struct map_desc vr1000_iodesc[] __initdata = {
/* ISA IO areas */
-
- { (u32)S3C24XX_VA_ISA_BYTE, PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
- { (u32)S3C24XX_VA_ISA_WORD, PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
-
- /* we could possibly compress the next set down into a set of smaller tables
- * pagetables, but that would mean using an L2 section, and it still means
- * we cannot actually feed the same register to an LDR due to 16K spacing
- */
-
- /* bast CPLD control registers, and external interrupt controls */
- { (u32)VR1000_VA_CTRL1, VR1000_PA_CTRL1, SZ_1M, MT_DEVICE },
- { (u32)VR1000_VA_CTRL2, VR1000_PA_CTRL2, SZ_1M, MT_DEVICE },
- { (u32)VR1000_VA_CTRL3, VR1000_PA_CTRL3, SZ_1M, MT_DEVICE },
- { (u32)VR1000_VA_CTRL4, VR1000_PA_CTRL4, SZ_1M, MT_DEVICE },
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = PA_CS2(BAST_PA_ISAIO),
+ .length = SZ_16M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = PA_CS3(BAST_PA_ISAIO),
+ .length = SZ_16M,
+ .type = MT_DEVICE,
+ },
+
+ /* CPLD control registers, and external interrupt controls */
+ {
+ .virtual = (u32)VR1000_VA_CTRL1,
+ .pfn = __phys_to_pfn(VR1000_PA_CTRL1),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)VR1000_VA_CTRL2,
+ .pfn = __phys_to_pfn(VR1000_PA_CTRL2),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)VR1000_VA_CTRL3,
+ .pfn = __phys_to_pfn(VR1000_PA_CTRL3),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)VR1000_VA_CTRL4,
+ .pfn = __phys_to_pfn(VR1000_PA_CTRL4),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
/* peripheral space... one for each of fast/slow/byte/16bit */
/* note, ide is only decoded in word space, even though some registers
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 47e0420623f..e4b435e634e 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -124,11 +124,13 @@ static void __init sa1100_timer_init(void)
tv.tv_sec = sa1100_get_rtc_time();
do_settimeofday(&tv);
- OSMR0 = 0; /* set initial match at 0 */
+ OIER = 0; /* disable any timer interrupts */
+ OSCR = LATCH*2; /* push OSCR out of the way */
+ OSMR0 = LATCH; /* set initial match */
OSSR = 0xf; /* clear status on all timers */
setup_irq(IRQ_OST0, &sa1100_timer_irq);
- OIER |= OIER_E0; /* enable match on timer 0 to cause interrupts */
- OSCR = 0; /* initialize free-running timer, force first match */
+ OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */
+ OSCR = 0; /* initialize free-running timer */
}
#ifdef CONFIG_NO_IDLE_HZ
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-23 09:07:28 +0000