diff options
Diffstat (limited to 'arch')
28 files changed, 278 insertions, 1179 deletions
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 24987c89609..06229026f78 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc3 -# Sun Oct 9 15:46:42 2005 +# Linux kernel version: 2.6.15-rc2 +# Mon Nov 28 10:30:09 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -64,6 +64,23 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # System Type # # CONFIG_ARCH_CLPS7500 is not set @@ -85,6 +102,7 @@ CONFIG_ARCH_PXA=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -98,12 +116,14 @@ CONFIG_ARCH_PXA=y CONFIG_PXA_SHARPSL=y CONFIG_PXA_SHARPSL_25x=y # CONFIG_PXA_SHARPSL_27x is not set -# CONFIG_MACH_POODLE is not set +CONFIG_MACH_POODLE=y CONFIG_MACH_CORGI=y CONFIG_MACH_SHEPHERD=y CONFIG_MACH_HUSKY=y +CONFIG_MACH_TOSA=y CONFIG_PXA25x=y CONFIG_PXA_SHARP_C7xx=y +CONFIG_PXA_SSP=y # # Processor Type @@ -155,6 +175,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ALIGNMENT_TRAP=y # @@ -235,6 +256,10 @@ CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set # @@ -356,6 +381,10 @@ CONFIG_IP6_NF_RAW=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -413,6 +442,7 @@ CONFIG_IRCOMM=m # CONFIG_SMC_IRCC_FIR is not set # CONFIG_ALI_FIR is not set # CONFIG_VIA_FIR is not set +CONFIG_PXA_FICP=m CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m @@ -431,7 +461,6 @@ CONFIG_BT_HCIUSB=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_BCSP_TXCRC=y CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m @@ -459,6 +488,11 @@ CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # CONFIG_MTD=y @@ -477,6 +511,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -532,6 +567,11 @@ CONFIG_MTD_NAND_SHARPSL=y # CONFIG_MTD_NAND_NANDSIM is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -551,14 +591,6 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -625,6 +657,7 @@ CONFIG_SCSI_MULTI_LUN=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set @@ -748,6 +781,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set # CONFIG_PPP_DEFLATE is not set CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set # CONFIG_PPPOE is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -850,11 +884,15 @@ CONFIG_UNIX98_PTYS=y # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -889,6 +927,7 @@ CONFIG_I2C_PXA=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -957,7 +996,10 @@ CONFIG_VIDEO_DEV=m # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set # CONFIG_TUNER_3036 is not set +# CONFIG_VIDEO_EM28XX is not set # CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_VIDEO_AUDIO_DECODER is not set +# CONFIG_VIDEO_DECODER is not set # # Radio Adapters @@ -976,13 +1018,12 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_PXA is not set CONFIG_FB_W100=y -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -991,6 +1032,7 @@ CONFIG_FB_W100=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -1087,15 +1129,15 @@ CONFIG_USB_SL811_CS=m # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m # -# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1107,7 +1149,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set # # USB Input Devices @@ -1185,6 +1226,7 @@ CONFIG_USB_MON=y CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ANYDATA is not set CONFIG_USB_SERIAL_BELKIN=m # CONFIG_USB_SERIAL_WHITEHEAT is not set CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m @@ -1340,6 +1382,7 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_SUMMARY=y CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -1466,7 +1509,9 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_USER is not set # CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y diff --git a/arch/arm/configs/poodle_defconfig b/arch/arm/configs/poodle_defconfig deleted file mode 100644 index 72822907759..00000000000 --- a/arch/arm/configs/poodle_defconfig +++ /dev/null @@ -1,1015 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc3 -# Sun Oct 9 17:04:29 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -CONFIG_ARCH_PXA=y -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set - -# -# Intel PXA2xx Implementations -# -# CONFIG_ARCH_LUBBOCK is not set -# CONFIG_MACH_MAINSTONE is not set -# CONFIG_ARCH_PXA_IDP is not set -CONFIG_PXA_SHARPSL=y -CONFIG_PXA_SHARPSL_25x=y -# CONFIG_PXA_SHARPSL_27x is not set -CONFIG_MACH_POODLE=y -# CONFIG_MACH_CORGI is not set -# CONFIG_MACH_SHEPHERD is not set -# CONFIG_MACH_HUSKY is not set -CONFIG_PXA25x=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -CONFIG_XSCALE_PMU=y -CONFIG_SHARP_LOCOMO=y -CONFIG_SHARP_PARAM=y -CONFIG_SHARP_SCOOP=y - -# -# Bus support -# -CONFIG_ISA_DMA_API=y - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -CONFIG_PCMCIA_PXA2XX=y - -# -# Kernel Features -# -CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m -# CONFIG_ARTHUR is not set - -# -# Power management options -# -CONFIG_PM=y -CONFIG_APM=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_SHARP_SL=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -# CONFIG_MTD_NAND_H1900 is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_SHARPSL=y -# CONFIG_MTD_NAND_NANDSIM is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_PCMCIA_WAVELAN is not set -# CONFIG_PCMCIA_NETWAVE is not set - -# -# Wireless 802.11 Frequency Hopping cards support -# -# CONFIG_PCMCIA_RAYCS is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# -# CONFIG_AIRO_CS is not set -# CONFIG_PCMCIA_WL3501 is not set -# CONFIG_HOSTAP is not set -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -# CONFIG_PCMCIA_3C589 is not set -# CONFIG_PCMCIA_3C574 is not set -# CONFIG_PCMCIA_FMVJ18X is not set -CONFIG_PCMCIA_PCNET=y -# CONFIG_PCMCIA_NMCLAN is not set -# CONFIG_PCMCIA_SMC91C92 is not set -# CONFIG_PCMCIA_XIRC2PS is not set -# CONFIG_PCMCIA_AXNET is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -# CONFIG_PPP_DEFLATE is not set -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_TSDEV=y -CONFIG_INPUT_TSDEV_SCREEN_X=240 -CONFIG_INPUT_TSDEV_SCREEN_Y=320 -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_EVBUG=y - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -CONFIG_KEYBOARD_LOCOMO=y -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_CORGI is not set -CONFIG_KEYBOARD_SPITZ=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# -CONFIG_I2C=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_PXA is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -CONFIG_I2C_DEBUG_CORE=y -CONFIG_I2C_DEBUG_ALGO=y -CONFIG_I2C_DEBUG_BUS=y -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m - -# -# Video For Linux -# - -# -# Video Adapters -# -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -# CONFIG_VIDEO_OVCAMCHIP is not set - -# -# Radio Adapters -# -# CONFIG_RADIO_MAESTRO is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y -# CONFIG_FB_MACMODES is not set -CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set -CONFIG_FB_PXA=y -# CONFIG_FB_W100 is not set -# CONFIG_FB_PXA_PARAMETERS is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -# CONFIG_FONT_8x16 is not set -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# -# CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB is not set - -# -# USB Gadget Support -# -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_NET2280 is not set -CONFIG_USB_GADGET_PXA2XX=y -CONFIG_USB_PXA2XX=y -# CONFIG_USB_PXA2XX_SMALL is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set -# CONFIG_USB_ZERO is not set -CONFIG_USB_ETH=y -CONFIG_USB_ETH_RNDIS=y -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_G_SERIAL is not set - -# -# MMC/SD Card support -# -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_PXA=y -# CONFIG_MMC_WBSD is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -CONFIG_JFFS2_RUBIN=y -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -CONFIG_CRAMFS=m -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=y - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_WAITQ is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 900e04f8e38..18e9beaec46 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc3 -# Sun Oct 9 17:11:19 2005 +# Linux kernel version: 2.6.15-rc2 +# Mon Nov 28 10:26:52 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -64,6 +64,23 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # System Type # # CONFIG_ARCH_CLPS7500 is not set @@ -85,6 +102,7 @@ CONFIG_ARCH_PXA=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -98,10 +116,13 @@ CONFIG_ARCH_PXA=y CONFIG_PXA_SHARPSL=y # CONFIG_PXA_SHARPSL_25x is not set CONFIG_PXA_SHARPSL_27x=y +CONFIG_MACH_AKITA=y CONFIG_MACH_SPITZ=y CONFIG_MACH_BORZOI=y CONFIG_PXA27x=y +CONFIG_IWMMXT=y CONFIG_PXA_SHARP_Cxx00=y +CONFIG_PXA_SSP=y # # Processor Type @@ -153,6 +174,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ALIGNMENT_TRAP=y # @@ -233,6 +255,10 @@ CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set # @@ -354,6 +380,10 @@ CONFIG_IP6_NF_RAW=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -411,6 +441,7 @@ CONFIG_IRCOMM=m # CONFIG_SMC_IRCC_FIR is not set # CONFIG_ALI_FIR is not set # CONFIG_VIA_FIR is not set +CONFIG_PXA_FICP=m CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m @@ -429,7 +460,6 @@ CONFIG_BT_HCIUSB=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_BCSP_TXCRC=y CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m @@ -457,6 +487,11 @@ CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # CONFIG_MTD=y @@ -475,6 +510,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -530,6 +566,11 @@ CONFIG_MTD_NAND_SHARPSL=y # CONFIG_MTD_NAND_NANDSIM is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -549,14 +590,6 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -623,6 +656,7 @@ CONFIG_SCSI_MULTI_LUN=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set @@ -746,6 +780,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set # CONFIG_PPP_DEFLATE is not set CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set # CONFIG_PPPOE is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -771,6 +806,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_POWER is not set # # Input Device Drivers @@ -848,11 +884,15 @@ CONFIG_UNIX98_PTYS=y # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -891,14 +931,13 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set CONFIG_FB_PXA=y -# CONFIG_FB_W100 is not set # CONFIG_FB_PXA_PARAMETERS is not set -# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_W100 is not set # CONFIG_FB_VIRTUAL is not set # @@ -907,6 +946,7 @@ CONFIG_FB_PXA=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -965,15 +1005,15 @@ CONFIG_USB_SL811_CS=m # # USB Device Class drivers # +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m # -# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -985,7 +1025,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set # # USB Input Devices @@ -1058,6 +1097,7 @@ CONFIG_USB_MON=y CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ANYDATA is not set CONFIG_USB_SERIAL_BELKIN=m # CONFIG_USB_SERIAL_WHITEHEAT is not set CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m @@ -1218,6 +1258,7 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_SUMMARY=y CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -1344,7 +1385,9 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_USER is not set # CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 8d8748407cb..d7d69fd7039 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -17,7 +17,6 @@ #include <asm/assembler.h> #include <asm/domain.h> -#include <asm/mach-types.h> #include <asm/procinfo.h> #include <asm/ptrace.h> #include <asm/asm-offsets.h> @@ -83,7 +82,7 @@ ENTRY(stext) @ and irqs disabled bl __lookup_processor_type @ r5=procinfo r9=cpuid movs r10, r5 @ invalid processor (r5=0)? - beq __error_p @ yes, error 'p' + beq __error_p @ yes, error 'p' bl __lookup_machine_type @ r5=machinfo movs r8, r5 @ invalid machine (r5=0)? beq __error_a @ yes, error 'a' @@ -343,16 +342,12 @@ __create_page_tables: bne 1b #if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS) /* - * If we're using the NetWinder, we need to map in - * the 16550-type serial port for the debug messages + * If we're using the NetWinder or CATS, we also need to map + * in the 16550-type serial port for the debug messages */ - teq r1, #MACH_TYPE_NETWINDER - teqne r1, #MACH_TYPE_CATS - bne 1f add r0, r4, #0xff000000 >> 18 orr r3, r7, #0x7c000000 str r3, [r0] -1: #endif #ifdef CONFIG_ARCH_RPC /* diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index cd506646801..526acbc3206 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -44,6 +44,7 @@ config PXA_SHARPSL_25x config PXA_SHARPSL_27x bool "Sharp PXA270 models (SL-Cxx00)" select PXA27x + select IWMMXT endchoice @@ -60,7 +61,6 @@ config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" depends PXA_SHARPSL_25x select PXA_SHARP_C7xx - select PXA_SSP config MACH_SHEPHERD bool "Enable Sharp SL-C750 (Shepherd) Support" @@ -90,7 +90,7 @@ config MACH_BORZOI config MACH_TOSA bool "Enable Sharp SL-6000x (Tosa) Support" - depends PXA_SHARPSL + depends PXA_SHARPSL_25x config PXA25x bool diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index e2c6fa23d3c..af6580f1ceb 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -30,7 +30,6 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/leds.h> -#include <asm/mach-types.h> #include <asm/hardware/amba.h> #include <asm/hardware/amba_clcd.h> #include <asm/hardware/arm_timer.h> diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c index 47b0b767f08..dbfe9e891f0 100644 --- a/arch/arm/mm/consistent.c +++ b/arch/arm/mm/consistent.c @@ -66,6 +66,7 @@ struct vm_region { unsigned long vm_start; unsigned long vm_end; struct page *vm_pages; + int vm_active; }; static struct vm_region consistent_head = { @@ -104,6 +105,7 @@ vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp) list_add_tail(&new->vm_list, &c->vm_list); new->vm_start = addr; new->vm_end = addr + size; + new->vm_active = 1; spin_unlock_irqrestore(&consistent_lock, flags); return new; @@ -120,7 +122,7 @@ static struct vm_region *vm_region_find(struct vm_region *head, unsigned long ad struct vm_region *c; list_for_each_entry(c, &head->vm_list, vm_list) { - if (c->vm_start == addr) + if (c->vm_active && c->vm_start == addr) goto out; } c = NULL; @@ -319,6 +321,7 @@ EXPORT_SYMBOL(dma_mmap_writecombine); /* * free a page as defined by the above mapping. + * Must not be called with IRQs disabled. */ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle) { @@ -326,14 +329,18 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr unsigned long flags, addr; pte_t *ptep; + WARN_ON(irqs_disabled()); + size = PAGE_ALIGN(size); spin_lock_irqsave(&consistent_lock, flags); - c = vm_region_find(&consistent_head, (unsigned long)cpu_addr); if (!c) goto no_area; + c->vm_active = 0; + spin_unlock_irqrestore(&consistent_lock, flags); + if ((c->vm_end - c->vm_start) != size) { printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n", __func__, c->vm_end - c->vm_start, size); @@ -372,8 +379,8 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr flush_tlb_kernel_range(c->vm_start, c->vm_end); + spin_lock_irqsave(&consistent_lock, flags); list_del(&c->vm_list); - spin_unlock_irqrestore(&consistent_lock, flags); kfree(c); diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 048c9c19aa4..465487470d0 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Fri Nov 11 21:55:04 2005 +# Last update: Fri Nov 25 14:43:04 2005 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -857,12 +857,12 @@ osiris MACH_OSIRIS OSIRIS 842 maestro MACH_MAESTRO MAESTRO 843 tunge2 MACH_TUNGE2 TUNGE2 844 ixbbm MACH_IXBBM IXBBM 845 -mx27 MACH_MX27 MX27 846 +mx27ads MACH_MX27 MX27 846 ax8004 MACH_AX8004 AX8004 847 at91sam9261ek MACH_AT91SAM9261EK AT91SAM9261EK 848 loft MACH_LOFT LOFT 849 magpie MACH_MAGPIE MAGPIE 850 -mx21 MACH_MX21 MX21 851 +mx21ads MACH_MX21 MX21 851 mb87m3400 MACH_MB87M3400 MB87M3400 852 mguard_delta MACH_MGUARD_DELTA MGUARD_DELTA 853 davinci_dvdp MACH_DAVINCI_DVDP DAVINCI_DVDP 854 @@ -897,10 +897,16 @@ omi_board MACH_OMI_BOARD OMI_BOARD 882 mx21civ MACH_MX21CIV MX21CIV 883 mahi_cdac MACH_MAHI_CDAC MAHI_CDAC 884 xscale_palmtx MACH_XSCALE_PALMTX XSCALE_PALMTX 885 -arch_s3c2413 MACH_ARCH_S3C2413 ARCH_S3C2413 886 s3c2413 MACH_S3C2413 S3C2413 887 samsys_ep0 MACH_SAMSYS_EP0 SAMSYS_EP0 888 wg302v1 MACH_WG302V1 WG302V1 889 wg302v2 MACH_WG302V2 WG302V2 890 eb42x MACH_EB42X EB42X 891 iq331es MACH_IQ331ES IQ331ES 892 +cosydsp MACH_COSYDSP COSYDSP 893 +uplat7d MACH_UPLAT7D UPLAT7D 894 +ptdavinci MACH_PTDAVINCI PTDAVINCI 895 +mbus MACH_MBUS MBUS 896 +nadia2vb MACH_NADIA2VB NADIA2VB 897 +r1000 MACH_R1000 R1000 898 +hw90250 MACH_HW90250 HW90250 899 diff --git a/arch/frv/kernel/semaphore.c b/arch/frv/kernel/semaphore.c index 5cba9c1f2b3..7971d680ae2 100644 --- a/arch/frv/kernel/semaphore.c +++ b/arch/frv/kernel/semaphore.c @@ -20,7 +20,7 @@ struct sem_waiter { struct task_struct *task; }; -#if SEM_DEBUG +#if SEMAPHORE_DEBUG void semtrace(struct semaphore *sem, const char *str) { if (sem->debug) diff --git a/arch/frv/mb93090-mb00/pci-irq.c b/arch/frv/mb93090-mb00/pci-irq.c index af981bda015..24622d89b1c 100644 --- a/arch/frv/mb93090-mb00/pci-irq.c +++ b/arch/frv/mb93090-mb00/pci-irq.c @@ -60,7 +60,7 @@ void __init pcibios_fixup_irqs(void) } } -void __init pcibios_penalize_isa_irq(int irq, int active) +void __init pcibios_penalize_isa_irq(int irq) { } diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c index 79433159b5f..765088ea8a5 100644 --- a/arch/frv/mm/init.c +++ b/arch/frv/mm/init.c @@ -108,7 +108,7 @@ void __init paging_init(void) memset((void *) empty_zero_page, 0, PAGE_SIZE); -#if CONFIG_HIGHMEM +#ifdef CONFIG_HIGHMEM if (num_physpages - num_mappedpages) { pgd_t *pge; pud_t *pue; diff --git a/arch/frv/mm/pgalloc.c b/arch/frv/mm/pgalloc.c index 2c67dfe5a6b..f76dd03ddd9 100644 --- a/arch/frv/mm/pgalloc.c +++ b/arch/frv/mm/pgalloc.c @@ -85,7 +85,7 @@ static inline void pgd_list_add(pgd_t *pgd) struct page *page = virt_to_page(pgd); page->index = (unsigned long) pgd_list; if (pgd_list) - pgd_list->private = (unsigned long) &page->index; + set_page_private(pgd_list, (unsigned long) &page->index); pgd_list = page; set_page_private(page, (unsigned long)&pgd_list); } @@ -94,10 +94,10 @@ static inline void pgd_list_del(pgd_t *pgd) { struct page *next, **pprev, *page = virt_to_page(pgd); next = (struct page *) page->index; - pprev = (struct page **)page_private(page); + pprev = (struct page **) page_private(page); *pprev = next; if (next) - next->private = (unsigned long) pprev; + set_page_private(next, (unsigned long) pprev); } void pgd_ctor(void *pgd, kmem_cache_t *cache, unsigned long unused) diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index cc5d7ac5b2e..22c8675c79f 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -2009,7 +2009,7 @@ static void ack_edge_ioapic_vector(unsigned int vector) { int irq = vector_to_irq(vector); - move_irq(vector); + move_native_irq(vector); ack_edge_ioapic_irq(irq); } @@ -2024,7 +2024,7 @@ static void end_level_ioapic_vector (unsigned int vector) { int irq = vector_to_irq(vector); - move_irq(vector); + move_native_irq(vector); end_level_ioapic_irq(irq); } diff --git a/arch/i386/kernel/reboot.c b/arch/i386/kernel/reboot.c index 350ea6680f6..2afe0f8d555 100644 --- a/arch/i386/kernel/reboot.c +++ b/arch/i386/kernel/reboot.c @@ -111,6 +111,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"), }, }, + { /* Handle problems with rebooting on HP nc6120 */ + .callback = set_bios_reboot, + .ident = "HP Compaq nc6120", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nc6120"), + }, + }, { } }; diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c index 01572814abe..5db9d3bcbbc 100644 --- a/arch/ia64/kernel/ia64_ksyms.c +++ b/arch/ia64/kernel/ia64_ksyms.c @@ -42,6 +42,7 @@ EXPORT_SYMBOL(clear_page); #ifdef CONFIG_VIRTUAL_MEM_MAP #include <linux/bootmem.h> +EXPORT_SYMBOL(min_low_pfn); /* defined by bootmem.c, but not exported by generic code */ EXPORT_SYMBOL(max_low_pfn); /* defined by bootmem.c, but not exported by generic code */ #endif diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index 801eeaeaf3d..2895d6e6062 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -740,7 +740,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, switch(val) { case DIE_BREAK: /* err is break number from ia64_bad_break() */ - if (args->err == 0x80200 || args->err == 0x80300) + if (args->err == 0x80200 || args->err == 0x80300 || args->err == 0) if (pre_kprobes_handler(args)) ret = NOTIFY_STOP; break; diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c index fba5fdd1f96..d3e0ecb56d6 100644 --- a/arch/ia64/kernel/traps.c +++ b/arch/ia64/kernel/traps.c @@ -132,24 +132,6 @@ __kprobes ia64_bad_break (unsigned long break_num, struct pt_regs *regs) siginfo_t siginfo; int sig, code; - /* break.b always sets cr.iim to 0, which causes problems for - * debuggers. Get the real break number from the original instruction, - * but only for kernel code. User space break.b is left alone, to - * preserve the existing behaviour. All break codings have the same - * format, so there is no need to check the slot type. - */ - if (break_num == 0 && !user_mode(regs)) { - struct ia64_psr *ipsr = ia64_psr(regs); - unsigned long *bundle = (unsigned long *)regs->cr_iip; - unsigned long slot; - switch (ipsr->ri) { - case 0: slot = (bundle[0] >> 5); break; - case 1: slot = (bundle[0] >> 46) | (bundle[1] << 18); break; - default: slot = (bundle[1] >> 23); break; - } - break_num = ((slot >> 36 & 1) << 20) | (slot >> 6 & 0xfffff); - } - /* SIGILL, SIGFPE, SIGSEGV, and SIGBUS want these field initialized: */ siginfo.si_addr = (void __user *) (regs->cr_iip + ia64_psr(regs)->ri); siginfo.si_imm = break_num; diff --git a/arch/m32r/kernel/io_mappi3.c b/arch/m32r/kernel/io_mappi3.c index 6716ffea769..f80321a5876 100644 --- a/arch/m32r/kernel/io_mappi3.c +++ b/arch/m32r/kernel/io_mappi3.c @@ -36,12 +36,13 @@ static inline void *_port2addr(unsigned long port) return (void *)(port + NONCACHE_OFFSET); } -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) +#if defined(CONFIG_IDE) static inline void *__port2addr_ata(unsigned long port) { static int dummy_reg; switch (port) { + /* IDE0 CF */ case 0x1f0: return (void *)0xb4002000; case 0x1f1: return (void *)0xb4012800; case 0x1f2: return (void *)0xb4012002; @@ -51,6 +52,17 @@ static inline void *__port2addr_ata(unsigned long port) case 0x1f6: return (void *)0xb4012006; case 0x1f7: return (void *)0xb4012806; case 0x3f6: return (void *)0xb401200e; + /* IDE1 IDE */ + case 0x170: return (void *)0xb4810000; /* Data 16bit */ + case 0x171: return (void *)0xb4810002; /* Features / Error */ + case 0x172: return (void *)0xb4810004; /* Sector count */ + case 0x173: return (void *)0xb4810006; /* Sector number */ + case 0x174: return (void *)0xb4810008; /* Cylinder low */ + case 0x175: return (void *)0xb481000a; /* Cylinder high */ + case 0x176: return (void *)0xb481000c; /* Device head */ + case 0x177: return (void *)0xb481000e; /* Command */ + case 0x376: return (void *)0xb480800c; /* Device control / Alt status */ + default: return (void *)&dummy_reg; } } @@ -108,8 +120,9 @@ unsigned char _inb(unsigned long port) { if (port >= LAN_IOSTART && port < LAN_IOEND) return _ne_inb(PORT2ADDR_NE(port)); -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { +#if defined(CONFIG_IDE) + else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || + ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ return *(volatile unsigned char *)__port2addr_ata(port); } #endif @@ -127,8 +140,9 @@ unsigned short _inw(unsigned long port) { if (port >= LAN_IOSTART && port < LAN_IOEND) return _ne_inw(PORT2ADDR_NE(port)); -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { +#if defined(CONFIG_IDE) + else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || + ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ return *(volatile unsigned short *)__port2addr_ata(port); } #endif @@ -185,8 +199,9 @@ void _outb(unsigned char b, unsigned long port) if (port >= LAN_IOSTART && port < LAN_IOEND) _ne_outb(b, PORT2ADDR_NE(port)); else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { +#if defined(CONFIG_IDE) + if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || + ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ *(volatile unsigned char *)__port2addr_ata(port) = b; } else #endif @@ -203,8 +218,9 @@ void _outw(unsigned short w, unsigned long port) if (port >= LAN_IOSTART && port < LAN_IOEND) _ne_outw(w, PORT2ADDR_NE(port)); else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { +#if defined(CONFIG_IDE) + if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || + ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ *(volatile unsigned short *)__port2addr_ata(port) = w; } else #endif @@ -253,8 +269,9 @@ void _insb(unsigned int port, void * addr, unsigned long count) { if (port >= LAN_IOSTART && port < LAN_IOEND) _ne_insb(PORT2ADDR_NE(port), addr, count); -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { +#if defined(CONFIG_IDE) + else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || + ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ unsigned char *buf = addr; unsigned char *portp = __port2addr_ata(port); while (count--) @@ -289,8 +306,9 @@ void _insw(unsigned int port, void * addr, unsigned long count) pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short), count, 1); #endif -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { +#if defined(CONFIG_IDE) + } else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || + ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ portp = __port2addr_ata(port); while (count--) *buf++ = *(volatile unsigned short *)portp; @@ -321,8 +339,9 @@ void _outsb(unsigned int port, const void * addr, unsigned long count) portp = PORT2ADDR_NE(port); while (count--) _ne_outb(*buf++, portp); -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { +#if defined(CONFIG_IDE) + } else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || + ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ portp = __port2addr_ata(port); while (count--) *(volatile unsigned char *)portp = *buf++; @@ -348,8 +367,9 @@ void _outsw(unsigned int port, const void * addr, unsigned long count) portp = PORT2ADDR_NE(port); while (count--) *(volatile unsigned short *)portp = *buf++; -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { +#if defined(CONFIG_IDE) + } else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || + ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ portp = __port2addr_ata(port); while (count--) *(volatile unsigned short *)portp = *buf++; diff --git a/arch/m32r/kernel/setup_mappi3.c b/arch/m32r/kernel/setup_mappi3.c index 9c79341a7b4..f6ecdf7f555 100644 --- a/arch/m32r/kernel/setup_mappi3.c +++ b/arch/m32r/kernel/setup_mappi3.c @@ -151,7 +151,7 @@ void __init init_IRQ(void) disable_mappi3_irq(M32R_IRQ_INT1); #endif /* CONFIG_USB */ - /* ICUCR40: CFC IREQ */ + /* CFC IREQ */ irq_desc[PLD_IRQ_CFIREQ].status = IRQ_DISABLED; irq_desc[PLD_IRQ_CFIREQ].handler = &mappi3_irq_type; irq_desc[PLD_IRQ_CFIREQ].action = 0; @@ -160,7 +160,7 @@ void __init init_IRQ(void) disable_mappi3_irq(PLD_IRQ_CFIREQ); #if defined(CONFIG_M32R_CFC) - /* ICUCR41: CFC Insert */ + /* ICUCR41: CFC Insert & eject */ irq_desc[PLD_IRQ_CFC_INSERT].status = IRQ_DISABLED; irq_desc[PLD_IRQ_CFC_INSERT].handler = &mappi3_irq_type; irq_desc[PLD_IRQ_CFC_INSERT].action = 0; @@ -168,14 +168,16 @@ void __init init_IRQ(void) icu_data[PLD_IRQ_CFC_INSERT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00; disable_mappi3_irq(PLD_IRQ_CFC_INSERT); - /* ICUCR42: CFC Eject */ - irq_desc[PLD_IRQ_CFC_EJECT].status = IRQ_DISABLED; - irq_desc[PLD_IRQ_CFC_EJECT].handler = &mappi3_irq_type; - irq_desc[PLD_IRQ_CFC_EJECT].action = 0; - irq_desc[PLD_IRQ_CFC_EJECT].depth = 1; /* disable nested irq */ - icu_data[PLD_IRQ_CFC_EJECT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; - disable_mappi3_irq(PLD_IRQ_CFC_EJECT); #endif /* CONFIG_M32R_CFC */ + + /* IDE IREQ */ + irq_desc[PLD_IRQ_IDEIREQ].status = IRQ_DISABLED; + irq_desc[PLD_IRQ_IDEIREQ].handler = &mappi3_irq_type; + irq_desc[PLD_IRQ_IDEIREQ].action = 0; + irq_desc[PLD_IRQ_IDEIREQ].depth = 1; /* disable nested irq */ + icu_data[PLD_IRQ_IDEIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; + disable_mappi3_irq(PLD_IRQ_IDEIREQ); + } #if defined(CONFIG_SMC91X) diff --git a/arch/m32r/kernel/sys_m32r.c b/arch/m32r/kernel/sys_m32r.c index e0500e12c5f..fe55b28d372 100644 --- a/arch/m32r/kernel/sys_m32r.c +++ b/arch/m32r/kernel/sys_m32r.c @@ -41,7 +41,8 @@ asmlinkage int sys_tas(int *addr) return -EFAULT; local_irq_save(flags); oldval = *addr; - *addr = 1; + if (!oldval) + *addr = 1; local_irq_restore(flags); return oldval; } @@ -59,7 +60,8 @@ asmlinkage int sys_tas(int *addr) _raw_spin_lock(&tas_lock); oldval = *addr; - *addr = 1; + if (!oldval) + *addr = 1; _raw_spin_unlock(&tas_lock); return oldval; diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index af4d1bc9a2e..94db2570845 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -163,15 +163,13 @@ EXPORT_SYMBOL(giveup_altivec); EXPORT_SYMBOL(giveup_spe); #endif /* CONFIG_SPE */ -#ifdef CONFIG_PPC64 -EXPORT_SYMBOL(__flush_icache_range); -#else +#ifndef CONFIG_PPC64 EXPORT_SYMBOL(flush_instruction_cache); -EXPORT_SYMBOL(flush_icache_range); EXPORT_SYMBOL(flush_tlb_kernel_range); EXPORT_SYMBOL(flush_tlb_page); EXPORT_SYMBOL(_tlbie); #endif +EXPORT_SYMBOL(__flush_icache_range); EXPORT_SYMBOL(flush_dcache_range); #ifdef CONFIG_SMP diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index a5a7542a8ff..105d5609ff5 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -201,6 +201,28 @@ int dump_spe(struct pt_regs *regs, elf_vrregset_t *evrregs) } #endif /* CONFIG_SPE */ +/* + * If we are doing lazy switching of CPU state (FP, altivec or SPE), + * and the current task has some state, discard it. + */ +static inline void discard_lazy_cpu_state(void) +{ +#ifndef CONFIG_SMP + preempt_disable(); + if (last_task_used_math == current) + last_task_used_math = NULL; +#ifdef CONFIG_ALTIVEC + if (last_task_used_altivec == current) + last_task_used_altivec = NULL; +#endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_SPE + if (last_task_used_spe == current) + last_task_used_spe = NULL; +#endif + preempt_enable(); +#endif /* CONFIG_SMP */ +} + int set_dabr(unsigned long dabr) { if (ppc_md.set_dabr) @@ -434,19 +456,7 @@ void show_regs(struct pt_regs * regs) void exit_thread(void) { kprobe_flush_task(current); - -#ifndef CONFIG_SMP - if (last_task_used_math == current) - last_task_used_math = NULL; -#ifdef CONFIG_ALTIVEC - if (last_task_used_altivec == current) - last_task_used_altivec = NULL; -#endif /* CONFIG_ALTIVEC */ -#ifdef CONFIG_SPE - if (last_task_used_spe == current) - last_task_used_spe = NULL; -#endif -#endif /* CONFIG_SMP */ + discard_lazy_cpu_state(); } void flush_thread(void) @@ -458,18 +468,7 @@ void flush_thread(void) t->flags ^= (_TIF_ABI_PENDING | _TIF_32BIT); #endif -#ifndef CONFIG_SMP - if (last_task_used_math == current) - last_task_used_math = NULL; -#ifdef CONFIG_ALTIVEC - if (last_task_used_altivec == current) - last_task_used_altivec = NULL; -#endif /* CONFIG_ALTIVEC */ -#ifdef CONFIG_SPE - if (last_task_used_spe == current) - last_task_used_spe = NULL; -#endif -#endif /* CONFIG_SMP */ + discard_lazy_cpu_state(); #ifdef CONFIG_PPC64 /* for now */ if (current->thread.dabr) { @@ -635,18 +634,7 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp) } #endif -#ifndef CONFIG_SMP - if (last_task_used_math == current) - last_task_used_math = NULL; -#ifdef CONFIG_ALTIVEC - if (last_task_used_altivec == current) - last_task_used_altivec = NULL; -#endif -#ifdef CONFIG_SPE - if (last_task_used_spe == current) - last_task_used_spe = NULL; -#endif -#endif /* CONFIG_SMP */ + discard_lazy_cpu_state(); memset(current->thread.fpr, 0, sizeof(current->thread.fpr)); current->thread.fpscr.val = 0; #ifdef CONFIG_ALTIVEC diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 4ce0105c308..bcdc209dca8 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -265,7 +265,7 @@ static int __init call_prom_ret(const char *service, int nargs, int nret, va_end(list); for (i = 0; i < nret; i++) - rets[nargs+i] = 0; + args.args[nargs+i] = 0; if (enter_prom(&args, RELOC(prom_entry)) < 0) return PROM_ERROR; diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index b44b36e0c29..f0c47dab090 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -145,8 +145,7 @@ static void dump_vdso_pages(struct vm_area_struct * vma) struct page *pg = virt_to_page(vdso32_kbase + i*PAGE_SIZE); struct page *upg = (vma && vma->vm_mm) ? - follow_page(vma->vm_mm, vma->vm_start + - i*PAGE_SIZE, 0) + follow_page(vma, vma->vm_start + i*PAGE_SIZE, 0) : NULL; dump_one_vdso_page(pg, upg); } @@ -157,8 +156,7 @@ static void dump_vdso_pages(struct vm_area_struct * vma) struct page *pg = virt_to_page(vdso64_kbase + i*PAGE_SIZE); struct page *upg = (vma && vma->vm_mm) ? - follow_page(vma->vm_mm, vma->vm_start + - i*PAGE_SIZE, 0) + follow_page(vma, vma->vm_start + i*PAGE_SIZE, 0) : NULL; dump_one_vdso_page(pg, upg); } diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index 66073f77519..bb6a5c6a64b 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -184,7 +184,7 @@ EXPORT_SYMBOL(kernel_thread); EXPORT_SYMBOL(flush_instruction_cache); EXPORT_SYMBOL(giveup_fpu); -EXPORT_SYMBOL(flush_icache_range); +EXPORT_SYMBOL(__flush_icache_range); EXPORT_SYMBOL(flush_dcache_range); EXPORT_SYMBOL(flush_icache_user_range); EXPORT_SYMBOL(flush_dcache_page); diff --git a/arch/ppc/kernel/process.c b/arch/ppc/kernel/process.c index cb1c7b92f8c..25cbdc8d294 100644 --- a/arch/ppc/kernel/process.c +++ b/arch/ppc/kernel/process.c @@ -417,6 +417,7 @@ void show_regs(struct pt_regs * regs) void exit_thread(void) { + preempt_disable(); if (last_task_used_math == current) last_task_used_math = NULL; if (last_task_used_altivec == current) @@ -425,10 +426,12 @@ void exit_thread(void) if (last_task_used_spe == current) last_task_used_spe = NULL; #endif + preempt_enable(); } void flush_thread(void) { + preempt_disable(); if (last_task_used_math == current) last_task_used_math = NULL; if (last_task_used_altivec == current) @@ -437,6 +440,7 @@ void flush_thread(void) if (last_task_used_spe == current) last_task_used_spe = NULL; #endif + preempt_enable(); } void @@ -535,6 +539,7 @@ void start_thread(struct pt_regs *regs, unsigned long nip, unsigned long sp) regs->nip = nip; regs->gpr[1] = sp; regs->msr = MSR_USER; + preempt_disable(); if (last_task_used_math == current) last_task_used_math = NULL; if (last_task_used_altivec == current) @@ -543,6 +548,7 @@ void start_thread(struct pt_regs *regs, unsigned long nip, unsigned long sp) if (last_task_used_spe == current) last_task_used_spe = NULL; #endif + preempt_enable(); memset(current->thread.fpr, 0, sizeof(current->thread.fpr)); current->thread.fpscr.val = 0; #ifdef CONFIG_ALTIVEC diff --git a/arch/sparc/mm/generic.c b/arch/sparc/mm/generic.c index 0410bae681f..2cb0728cee0 100644 --- a/arch/sparc/mm/generic.c +++ b/arch/sparc/mm/generic.c @@ -32,9 +32,7 @@ static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte, unsigne if (end > PMD_SIZE) end = PMD_SIZE; do { - pte_t oldpage = *pte; - pte_clear(mm, address, pte); - set_pte(pte, mk_pte_io(offset, prot, space)); + set_pte_at(mm, address, pte, mk_pte_io(offset, prot, space)); address += PAGE_SIZE; offset += PAGE_SIZE; pte++; @@ -63,7 +61,7 @@ static inline int io_remap_pmd_range(struct mm_struct *mm, pmd_t * pmd, unsigned } int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from, - unsigned long pfn, unsigned long size, pgprot_t prot) + unsigned long pfn, unsigned long size, pgprot_t prot) { int error = 0; pgd_t * dir; @@ -74,7 +72,9 @@ int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT; /* See comment in mm/memory.c remap_pfn_range */ - vma->vm_flags |= VM_IO | VM_RESERVED | VM_UNPAGED; + vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP; + vma->vm_pgoff = (offset >> PAGE_SHIFT) | + ((unsigned long)space << 28UL); prot = __pgprot(pg_iobits); offset -= from; diff --git a/arch/sparc64/mm/generic.c b/arch/sparc64/mm/generic.c index 8fd4cb1f050..580b63da836 100644 --- a/arch/sparc64/mm/generic.c +++ b/arch/sparc64/mm/generic.c @@ -15,6 +15,15 @@ #include <asm/page.h> #include <asm/tlbflush.h> +static inline pte_t mk_pte_io(unsigned long page, pgprot_t prot, int space) +{ + pte_t pte; + pte_val(pte) = (((page) | pgprot_val(prot) | _PAGE_E) & + ~(unsigned long)_PAGE_CACHE); + pte_val(pte) |= (((unsigned long)space) << 32); + return pte; +} + /* Remap IO memory, the same way as remap_pfn_range(), but use * the obio memory space. * @@ -68,6 +77,7 @@ static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte, BUG_ON(!pte_none(*pte)); set_pte_at(mm, address, pte, entry); address += PAGE_SIZE; + pte_val(entry) += PAGE_SIZE; pte++; } while (address < curend); } while (address < end); @@ -126,9 +136,13 @@ int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from, struct mm_struct *mm = vma->vm_mm; int space = GET_IOSPACE(pfn); unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT; + unsigned long phys_base; + + phys_base = offset | (((unsigned long) space) << 32UL); /* See comment in mm/memory.c remap_pfn_range */ - vma->vm_flags |= VM_IO | VM_RESERVED | VM_UNPAGED; + vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP; + vma->vm_pgoff = phys_base >> PAGE_SHIFT; prot = __pgprot(pg_iobits); offset -= from; |