summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/alpha/Kconfig1
-rw-r--r--arch/alpha/kernel/irq.c13
-rw-r--r--arch/alpha/kernel/irq_alpha.c11
-rw-r--r--arch/alpha/kernel/irq_i8259.c18
-rw-r--r--arch/alpha/kernel/irq_impl.h8
-rw-r--r--arch/alpha/kernel/irq_pyxis.c20
-rw-r--r--arch/alpha/kernel/irq_srm.c16
-rw-r--r--arch/alpha/kernel/sys_alcor.c28
-rw-r--r--arch/alpha/kernel/sys_cabriolet.c16
-rw-r--r--arch/alpha/kernel/sys_dp264.c52
-rw-r--r--arch/alpha/kernel/sys_eb64p.c18
-rw-r--r--arch/alpha/kernel/sys_eiger.c14
-rw-r--r--arch/alpha/kernel/sys_jensen.c24
-rw-r--r--arch/alpha/kernel/sys_marvel.c42
-rw-r--r--arch/alpha/kernel/sys_mikasa.c16
-rw-r--r--arch/alpha/kernel/sys_noritake.c16
-rw-r--r--arch/alpha/kernel/sys_rawhide.c17
-rw-r--r--arch/alpha/kernel/sys_rx164.c16
-rw-r--r--arch/alpha/kernel/sys_sable.c20
-rw-r--r--arch/alpha/kernel/sys_takara.c14
-rw-r--r--arch/alpha/kernel/sys_titan.c21
-rw-r--r--arch/alpha/kernel/sys_wildfire.c32
-rw-r--r--arch/arm/Kconfig145
-rw-r--r--arch/arm/Makefile11
-rw-r--r--arch/arm/boot/Makefile4
-rw-r--r--arch/arm/boot/compressed/.gitignore6
-rw-r--r--arch/arm/boot/compressed/Makefile21
-rw-r--r--arch/arm/boot/compressed/head-shmobile.S30
-rw-r--r--arch/arm/boot/compressed/head-vt8500.S46
-rw-r--r--arch/arm/boot/compressed/head.S251
-rw-r--r--arch/arm/boot/compressed/misc.c2
-rw-r--r--arch/arm/boot/compressed/mmcif-sh7372.c87
-rw-r--r--arch/arm/boot/compressed/vmlinux.lds.in3
-rw-r--r--arch/arm/common/Kconfig2
-rw-r--r--arch/arm/common/gic.c72
-rw-r--r--arch/arm/include/asm/a.out-core.h6
-rw-r--r--arch/arm/include/asm/bitops.h60
-rw-r--r--arch/arm/include/asm/cacheflush.h136
-rw-r--r--arch/arm/include/asm/cpu-multi32.h69
-rw-r--r--arch/arm/include/asm/cpu-single.h44
-rw-r--r--arch/arm/include/asm/cputype.h3
-rw-r--r--arch/arm/include/asm/fncpy.h94
-rw-r--r--arch/arm/include/asm/glue-cache.h146
-rw-r--r--arch/arm/include/asm/glue-df.h110
-rw-r--r--arch/arm/include/asm/glue-pf.h57
-rw-r--r--arch/arm/include/asm/glue-proc.h264
-rw-r--r--arch/arm/include/asm/glue.h138
-rw-r--r--arch/arm/include/asm/hardware/cache-l2x0.h1
-rw-r--r--arch/arm/include/asm/hardware/gic.h1
-rw-r--r--arch/arm/include/asm/hardware/sp810.h3
-rw-r--r--arch/arm/include/asm/highmem.h29
-rw-r--r--arch/arm/include/asm/mach/arch.h4
-rw-r--r--arch/arm/include/asm/mach/irq.h31
-rw-r--r--arch/arm/include/asm/outercache.h1
-rw-r--r--arch/arm/include/asm/pgalloc.h2
-rw-r--r--arch/arm/include/asm/proc-fns.h306
-rw-r--r--arch/arm/include/asm/processor.h14
-rw-r--r--arch/arm/include/asm/ptrace.h2
-rw-r--r--arch/arm/include/asm/smp_scu.h7
-rw-r--r--arch/arm/include/asm/spinlock.h53
-rw-r--r--arch/arm/include/asm/system.h17
-rw-r--r--arch/arm/include/asm/tlb.h105
-rw-r--r--arch/arm/include/asm/tlbflush.h7
-rw-r--r--arch/arm/include/asm/tls.h11
-rw-r--r--arch/arm/include/asm/traps.h1
-rw-r--r--arch/arm/include/asm/user.h2
-rw-r--r--arch/arm/kernel/Makefile1
-rw-r--r--arch/arm/kernel/armksyms.c18
-rw-r--r--arch/arm/kernel/asm-offsets.c11
-rw-r--r--arch/arm/kernel/bios32.c5
-rw-r--r--arch/arm/kernel/debug.S2
-rw-r--r--arch/arm/kernel/entry-armv.S3
-rw-r--r--arch/arm/kernel/entry-header.S14
-rw-r--r--arch/arm/kernel/head.S38
-rw-r--r--arch/arm/kernel/hw_breakpoint.c68
-rw-r--r--arch/arm/kernel/irq.c50
-rw-r--r--arch/arm/kernel/kprobes-decode.c2
-rw-r--r--arch/arm/kernel/module.c32
-rw-r--r--arch/arm/kernel/perf_event.c2
-rw-r--r--arch/arm/kernel/perf_event_v6.c4
-rw-r--r--arch/arm/kernel/pmu.c22
-rw-r--r--arch/arm/kernel/ptrace.c389
-rw-r--r--arch/arm/kernel/ptrace.h37
-rw-r--r--arch/arm/kernel/return_address.c1
-rw-r--r--arch/arm/kernel/setup.c4
-rw-r--r--arch/arm/kernel/signal.c13
-rw-r--r--arch/arm/kernel/sleep.S134
-rw-r--r--arch/arm/kernel/smp_scu.c23
-rw-r--r--arch/arm/kernel/traps.c4
-rw-r--r--arch/arm/kernel/vmlinux.lds.S11
-rw-r--r--arch/arm/lib/bitops.h50
-rw-r--r--arch/arm/lib/changebit.S10
-rw-r--r--arch/arm/lib/clearbit.S11
-rw-r--r--arch/arm/lib/setbit.S11
-rw-r--r--arch/arm/lib/testchangebit.S9
-rw-r--r--arch/arm/lib/testclearbit.S9
-rw-r--r--arch/arm/lib/testsetbit.S9
-rw-r--r--arch/arm/mach-at91/board-snapper9260.c1
-rw-r--r--arch/arm/mach-at91/include/mach/gpio.h11
-rw-r--r--arch/arm/mach-davinci/cpufreq.c2
-rw-r--r--arch/arm/mach-davinci/devices-da8xx.c7
-rw-r--r--arch/arm/mach-davinci/gpio-tnetv107x.c18
-rw-r--r--arch/arm/mach-davinci/include/mach/clkdev.h2
-rw-r--r--arch/arm/mach-dove/Kconfig2
-rw-r--r--arch/arm/mach-ep93xx/core.c2
-rw-r--r--arch/arm/mach-ep93xx/edb93xx.c116
-rw-r--r--arch/arm/mach-ep93xx/gpio.c33
-rw-r--r--arch/arm/mach-ep93xx/include/mach/gpio.h2
-rw-r--r--arch/arm/mach-footbridge/dc21285-timer.c84
-rw-r--r--arch/arm/mach-footbridge/include/mach/hardware.h21
-rw-r--r--arch/arm/mach-footbridge/include/mach/io.h10
-rw-r--r--arch/arm/mach-footbridge/isa-timer.c129
-rw-r--r--arch/arm/mach-gemini/board-nas4220b.c1
-rw-r--r--arch/arm/mach-gemini/board-rut1xx.c1
-rw-r--r--arch/arm/mach-gemini/board-wbd111.c1
-rw-r--r--arch/arm/mach-gemini/board-wbd222.c1
-rw-r--r--arch/arm/mach-gemini/common.h1
-rw-r--r--arch/arm/mach-gemini/devices.c26
-rw-r--r--arch/arm/mach-imx/mach-mx25_3ds.c2
-rw-r--r--arch/arm/mach-ixp4xx/common.c4
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/timex.h5
-rw-r--r--arch/arm/mach-ixp4xx/ixp4xx_qmgr.c9
-rw-r--r--arch/arm/mach-mxs/clock-mx23.c4
-rw-r--r--arch/arm/mach-mxs/clock-mx28.c7
-rw-r--r--arch/arm/mach-mxs/clock.c2
-rw-r--r--arch/arm/mach-mxs/gpio.c32
-rw-r--r--arch/arm/mach-mxs/icoll.c16
-rw-r--r--arch/arm/mach-mxs/include/mach/clock.h2
-rw-r--r--arch/arm/mach-omap1/lcd_dma.c24
-rw-r--r--arch/arm/mach-omap1/pm.h6
-rw-r--r--arch/arm/mach-omap1/sleep.S3
-rw-r--r--arch/arm/mach-omap1/sram.S1
-rw-r--r--arch/arm/mach-omap1/time.c1
-rw-r--r--arch/arm/mach-omap2/Kconfig1
-rw-r--r--arch/arm/mach-omap2/board-devkit8000.c27
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c2
-rw-r--r--arch/arm/mach-omap2/board-rm680.c3
-rw-r--r--arch/arm/mach-omap2/clkt_dpll.c2
-rw-r--r--arch/arm/mach-omap2/mailbox.c12
-rw-r--r--arch/arm/mach-omap2/mux.c3
-rw-r--r--arch/arm/mach-omap2/omap4-common.c7
-rw-r--r--arch/arm/mach-omap2/pm-debug.c8
-rw-r--r--arch/arm/mach-omap2/pm.h2
-rw-r--r--arch/arm/mach-omap2/pm34xx.c7
-rw-r--r--arch/arm/mach-omap2/prcm_mpu44xx.h4
-rw-r--r--arch/arm/mach-omap2/sleep24xx.S2
-rw-r--r--arch/arm/mach-omap2/sleep34xx.S2
-rw-r--r--arch/arm/mach-omap2/smartreflex.c48
-rw-r--r--arch/arm/mach-omap2/sram242x.S3
-rw-r--r--arch/arm/mach-omap2/sram243x.S3
-rw-r--r--arch/arm/mach-omap2/sram34xx.S1
-rw-r--r--arch/arm/mach-omap2/timer-gp.c13
-rw-r--r--arch/arm/mach-omap2/voltage.c1
-rw-r--r--arch/arm/mach-pxa/colibri-evalboard.c2
-rw-r--r--arch/arm/mach-pxa/colibri-pxa300.c2
-rw-r--r--arch/arm/mach-pxa/include/mach/colibri.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/pm.h5
-rw-r--r--arch/arm/mach-pxa/palm27x.c2
-rw-r--r--arch/arm/mach-pxa/palmz72.c2
-rw-r--r--arch/arm/mach-pxa/pm.c9
-rw-r--r--arch/arm/mach-pxa/pxa25x.c5
-rw-r--r--arch/arm/mach-pxa/pxa27x.c4
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c7
-rw-r--r--arch/arm/mach-pxa/sleep.S191
-rw-r--r--arch/arm/mach-pxa/tosa-bt.c2
-rw-r--r--arch/arm/mach-pxa/tosa.c6
-rw-r--r--arch/arm/mach-pxa/zeus.c2
-rw-r--r--arch/arm/mach-realview/Kconfig5
-rw-r--r--arch/arm/mach-s3c2440/Kconfig1
-rw-r--r--arch/arm/mach-s3c2440/include/mach/gta02.h26
-rw-r--r--arch/arm/mach-s3c64xx/clock.c6
-rw-r--r--arch/arm/mach-s3c64xx/dma.c11
-rw-r--r--arch/arm/mach-s3c64xx/gpiolib.c4
-rw-r--r--arch/arm/mach-s3c64xx/mach-smdk6410.c13
-rw-r--r--arch/arm/mach-s3c64xx/setup-keypad.c2
-rw-r--r--arch/arm/mach-s3c64xx/setup-sdhci.c2
-rw-r--r--arch/arm/mach-s3c64xx/sleep.S63
-rw-r--r--arch/arm/mach-s5p6442/include/mach/map.h69
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/gpio.h4
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/map.h83
-rw-r--r--arch/arm/mach-s5pc100/include/mach/map.h193
-rw-r--r--arch/arm/mach-s5pv210/include/mach/map.h168
-rw-r--r--arch/arm/mach-s5pv210/mach-aquila.c15
-rw-r--r--arch/arm/mach-s5pv210/mach-goni.c15
-rw-r--r--arch/arm/mach-s5pv210/sleep.S105
-rw-r--r--arch/arm/mach-s5pv310/Kconfig1
-rw-r--r--arch/arm/mach-s5pv310/include/mach/map.h151
-rw-r--r--arch/arm/mach-s5pv310/include/mach/sysmmu.h5
-rw-r--r--arch/arm/mach-sa1100/collie.c3
-rw-r--r--arch/arm/mach-sa1100/pm.c12
-rw-r--r--arch/arm/mach-sa1100/sleep.S72
-rw-r--r--arch/arm/mach-shmobile/board-ag5evm.c1
-rw-r--r--arch/arm/mach-shmobile/board-ap4evb.c2
-rw-r--r--arch/arm/mach-shmobile/board-mackerel.c2
-rw-r--r--arch/arm/mach-shmobile/clock-sh73a0.c17
-rw-r--r--arch/arm/mach-shmobile/include/mach/head-ap4evb.txt10
-rw-r--r--arch/arm/mach-shmobile/include/mach/head-mackerel.txt10
-rw-r--r--arch/arm/mach-shmobile/include/mach/mmcif-ap4eb.h29
-rw-r--r--arch/arm/mach-shmobile/include/mach/mmcif-mackerel.h39
-rw-r--r--arch/arm/mach-shmobile/include/mach/mmcif.h18
-rw-r--r--arch/arm/mach-spear3xx/clock.c479
-rw-r--r--arch/arm/mach-spear3xx/include/mach/entry-macro.S3
-rw-r--r--arch/arm/mach-spear3xx/include/mach/generic.h22
-rw-r--r--arch/arm/mach-spear3xx/include/mach/hardware.h3
-rw-r--r--arch/arm/mach-spear3xx/include/mach/irqs.h4
-rw-r--r--arch/arm/mach-spear3xx/include/mach/misc_regs.h143
-rw-r--r--arch/arm/mach-spear3xx/include/mach/spear.h135
-rw-r--r--arch/arm/mach-spear3xx/include/mach/spear300.h59
-rw-r--r--arch/arm/mach-spear3xx/include/mach/spear310.h34
-rw-r--r--arch/arm/mach-spear3xx/include/mach/spear320.h67
-rw-r--r--arch/arm/mach-spear3xx/spear300.c82
-rw-r--r--arch/arm/mach-spear3xx/spear300_evb.c15
-rw-r--r--arch/arm/mach-spear3xx/spear310.c21
-rw-r--r--arch/arm/mach-spear3xx/spear310_evb.c13
-rw-r--r--arch/arm/mach-spear3xx/spear320.c41
-rw-r--r--arch/arm/mach-spear3xx/spear320_evb.c15
-rw-r--r--arch/arm/mach-spear3xx/spear3xx.c55
-rw-r--r--arch/arm/mach-spear6xx/clock.c356
-rw-r--r--arch/arm/mach-spear6xx/include/mach/entry-macro.S3
-rw-r--r--arch/arm/mach-spear6xx/include/mach/generic.h7
-rw-r--r--arch/arm/mach-spear6xx/include/mach/hardware.h4
-rw-r--r--arch/arm/mach-spear6xx/include/mach/misc_regs.h143
-rw-r--r--arch/arm/mach-spear6xx/include/mach/spear.h175
-rw-r--r--arch/arm/mach-spear6xx/spear600.c2
-rw-r--r--arch/arm/mach-spear6xx/spear600_evb.c4
-rw-r--r--arch/arm/mach-spear6xx/spear6xx.c60
-rw-r--r--arch/arm/mach-tegra/include/mach/kbc.h1
-rw-r--r--arch/arm/mach-ux500/Kconfig1
-rw-r--r--arch/arm/mach-vt8500/Kconfig73
-rw-r--r--arch/arm/mach-vt8500/Makefile9
-rw-r--r--arch/arm/mach-vt8500/Makefile.boot3
-rw-r--r--arch/arm/mach-vt8500/bv07.c77
-rw-r--r--arch/arm/mach-vt8500/devices-vt8500.c91
-rw-r--r--arch/arm/mach-vt8500/devices-wm8505.c99
-rw-r--r--arch/arm/mach-vt8500/devices.c270
-rw-r--r--arch/arm/mach-vt8500/devices.h88
-rw-r--r--arch/arm/mach-vt8500/gpio.c240
-rw-r--r--arch/arm/mach-vt8500/include/mach/debug-macro.S31
-rw-r--r--arch/arm/mach-vt8500/include/mach/entry-macro.S32
-rw-r--r--arch/arm/mach-vt8500/include/mach/gpio.h6
-rw-r--r--arch/arm/mach-vt8500/include/mach/hardware.h12
-rw-r--r--arch/arm/mach-vt8500/include/mach/i8042.h18
-rw-r--r--arch/arm/mach-vt8500/include/mach/io.h28
-rw-r--r--arch/arm/mach-vt8500/include/mach/irqs.h22
-rw-r--r--arch/arm/mach-vt8500/include/mach/memory.h28
-rw-r--r--arch/arm/mach-vt8500/include/mach/system.h18
-rw-r--r--arch/arm/mach-vt8500/include/mach/timex.h26
-rw-r--r--arch/arm/mach-vt8500/include/mach/uncompress.h37
-rw-r--r--arch/arm/mach-vt8500/include/mach/vmalloc.h20
-rw-r--r--arch/arm/mach-vt8500/include/mach/vt8500_irqs.h88
-rw-r--r--arch/arm/mach-vt8500/include/mach/vt8500_regs.h79
-rw-r--r--arch/arm/mach-vt8500/include/mach/vt8500fb.h31
-rw-r--r--arch/arm/mach-vt8500/include/mach/wm8505_irqs.h115
-rw-r--r--arch/arm/mach-vt8500/include/mach/wm8505_regs.h78
-rw-r--r--arch/arm/mach-vt8500/irq.c177
-rw-r--r--arch/arm/mach-vt8500/pwm.c265
-rw-r--r--arch/arm/mach-vt8500/timer.c155
-rw-r--r--arch/arm/mach-vt8500/wm8505_7in.c77
-rw-r--r--arch/arm/mm/Kconfig57
-rw-r--r--arch/arm/mm/Makefile1
-rw-r--r--arch/arm/mm/abort-ev6.S6
-rw-r--r--arch/arm/mm/cache-l2x0.c38
-rw-r--r--arch/arm/mm/mmap.c2
-rw-r--r--arch/arm/mm/mmu.c10
-rw-r--r--arch/arm/mm/proc-arm1020.S3
-rw-r--r--arch/arm/mm/proc-arm1020e.S3
-rw-r--r--arch/arm/mm/proc-arm1022.S3
-rw-r--r--arch/arm/mm/proc-arm1026.S3
-rw-r--r--arch/arm/mm/proc-arm6_7.S6
-rw-r--r--arch/arm/mm/proc-arm720.S3
-rw-r--r--arch/arm/mm/proc-arm740.S3
-rw-r--r--arch/arm/mm/proc-arm7tdmi.S3
-rw-r--r--arch/arm/mm/proc-arm920.S37
-rw-r--r--arch/arm/mm/proc-arm922.S3
-rw-r--r--arch/arm/mm/proc-arm925.S3
-rw-r--r--arch/arm/mm/proc-arm926.S37
-rw-r--r--arch/arm/mm/proc-arm940.S3
-rw-r--r--arch/arm/mm/proc-arm946.S3
-rw-r--r--arch/arm/mm/proc-arm9tdmi.S3
-rw-r--r--arch/arm/mm/proc-fa526.S3
-rw-r--r--arch/arm/mm/proc-feroceon.S3
-rw-r--r--arch/arm/mm/proc-mohawk.S3
-rw-r--r--arch/arm/mm/proc-sa110.S3
-rw-r--r--arch/arm/mm/proc-sa1100.S39
-rw-r--r--arch/arm/mm/proc-v6.S50
-rw-r--r--arch/arm/mm/proc-v7.S128
-rw-r--r--arch/arm/mm/proc-xsc3.S48
-rw-r--r--arch/arm/mm/proc-xscale.S45
-rw-r--r--arch/arm/mm/vmregion.c17
-rw-r--r--arch/arm/oprofile/common.c14
-rw-r--r--arch/arm/plat-mxc/include/mach/uncompress.h2
-rw-r--r--arch/arm/plat-omap/include/plat/sram.h14
-rw-r--r--arch/arm/plat-omap/mailbox.c11
-rw-r--r--arch/arm/plat-omap/sram.c14
-rw-r--r--arch/arm/plat-pxa/mfp.c8
-rw-r--r--arch/arm/plat-s3c24xx/sleep.S57
-rw-r--r--arch/arm/plat-s5p/Kconfig24
-rw-r--r--arch/arm/plat-s5p/Makefile2
-rw-r--r--arch/arm/plat-s5p/dev-uart.c12
-rw-r--r--arch/arm/plat-s5p/include/plat/sysmmu.h23
-rw-r--r--arch/arm/plat-s5p/sysmmu.c4
-rw-r--r--arch/arm/plat-samsung/dev-ts.c1
-rw-r--r--arch/arm/plat-samsung/dev-uart.c2
-rw-r--r--arch/arm/plat-samsung/include/plat/pm.h14
-rw-r--r--arch/arm/plat-samsung/pm.c16
-rw-r--r--arch/arm/plat-spear/Makefile4
-rw-r--r--arch/arm/plat-spear/clock.c844
-rw-r--r--arch/arm/plat-spear/include/plat/clock.h166
-rw-r--r--arch/arm/plat-spear/include/plat/debug-macro.S2
-rw-r--r--arch/arm/plat-spear/include/plat/hardware.h23
-rw-r--r--arch/arm/plat-spear/include/plat/system.h4
-rw-r--r--arch/arm/plat-spear/include/plat/uncompress.h6
-rw-r--r--arch/arm/plat-spear/include/plat/vmalloc.h2
-rw-r--r--arch/arm/plat-spear/time.c26
-rw-r--r--arch/arm/tools/mach-types105
-rw-r--r--arch/arm/vfp/vfpmodule.c9
-rw-r--r--arch/blackfin/include/asm/bfin_serial.h2
-rw-r--r--arch/blackfin/lib/outs.S16
-rw-r--r--arch/blackfin/mach-common/cache.S2
-rw-r--r--arch/cris/kernel/vmlinux.lds.S5
-rw-r--r--arch/m32r/kernel/irq.c2
-rw-r--r--arch/m68k/include/asm/string.h4
-rw-r--r--arch/m68k/lib/string.c11
-rw-r--r--arch/m68knommu/kernel/vmlinux.lds.S6
-rw-r--r--arch/m68knommu/lib/Makefile2
-rw-r--r--arch/m68knommu/lib/memmove.c105
-rw-r--r--arch/m68knommu/platform/5249/intc2.c4
-rw-r--r--arch/m68knommu/platform/68328/entry.S1
-rw-r--r--arch/m68knommu/platform/68360/commproc.c2
-rw-r--r--arch/m68knommu/platform/68360/config.c2
-rw-r--r--arch/m68knommu/platform/68360/entry.S1
-rw-r--r--arch/m68knommu/platform/68360/ints.c4
-rw-r--r--arch/m68knommu/platform/coldfire/entry.S1
-rw-r--r--arch/microblaze/include/asm/irqflags.h2
-rw-r--r--arch/microblaze/include/asm/pgtable.h27
-rw-r--r--arch/microblaze/kernel/cpu/pvr.c4
-rw-r--r--arch/microblaze/kernel/head.S29
-rw-r--r--arch/microblaze/kernel/hw_exception_handler.S4
-rw-r--r--arch/microblaze/kernel/setup.c4
-rw-r--r--arch/microblaze/lib/fastcopy.S4
-rw-r--r--arch/powerpc/include/asm/machdep.h6
-rw-r--r--arch/powerpc/include/asm/mmu-book3e.h8
-rw-r--r--arch/powerpc/include/asm/page.h2
-rw-r--r--arch/powerpc/kernel/cpu_setup_6xx.S40
-rw-r--r--arch/powerpc/kernel/cputable.c4
-rw-r--r--arch/powerpc/kernel/machine_kexec.c5
-rw-r--r--arch/powerpc/kernel/process.c8
-rw-r--r--arch/powerpc/mm/numa.c55
-rw-r--r--arch/powerpc/mm/tlb_hash64.c6
-rw-r--r--arch/powerpc/platforms/pseries/lpar.c37
-rw-r--r--arch/s390/Kconfig2
-rw-r--r--arch/s390/boot/compressed/misc.c5
-rw-r--r--arch/s390/crypto/sha_common.c1
-rw-r--r--arch/s390/include/asm/atomic.h26
-rw-r--r--arch/s390/include/asm/cache.h1
-rw-r--r--arch/s390/include/asm/cacheflush.h23
-rw-r--r--arch/s390/include/asm/processor.h5
-rw-r--r--arch/s390/include/asm/tlb.h1
-rw-r--r--arch/s390/kernel/traps.c37
-rw-r--r--arch/s390/lib/uaccess_std.c10
-rw-r--r--arch/s390/mm/pgtable.c3
-rw-r--r--arch/sh/include/asm/sections.h2
-rw-r--r--arch/sh/kernel/cpu/sh4/setup-sh7750.c13
-rw-r--r--arch/sh/lib/delay.c10
-rw-r--r--arch/sh/mm/cache.c3
-rw-r--r--arch/sparc/include/asm/pcr.h2
-rw-r--r--arch/sparc/kernel/iommu.c5
-rw-r--r--arch/sparc/kernel/pcr.c2
-rw-r--r--arch/sparc/kernel/smp_64.c2
-rw-r--r--arch/sparc/kernel/una_asm_32.S4
-rw-r--r--arch/sparc/lib/bitext.c5
-rw-r--r--arch/x86/include/asm/acpi.h1
-rw-r--r--arch/x86/include/asm/apic.h1
-rw-r--r--arch/x86/include/asm/cpu.h2
-rw-r--r--arch/x86/include/asm/mmu_context.h5
-rw-r--r--arch/x86/include/asm/msr-index.h5
-rw-r--r--arch/x86/include/asm/perf_event_p4.h1
-rw-r--r--arch/x86/include/asm/smp.h5
-rw-r--r--arch/x86/include/asm/smpboot_hooks.h2
-rw-r--r--arch/x86/kernel/acpi/boot.c14
-rw-r--r--arch/x86/kernel/acpi/sleep.c15
-rw-r--r--arch/x86/kernel/alternative.c2
-rw-r--r--arch/x86/kernel/apb_timer.c2
-rw-r--r--arch/x86/kernel/apic/apic.c9
-rw-r--r--arch/x86/kernel/apic/io_apic.c3
-rw-r--r--arch/x86/kernel/cpu/cpufreq/p4-clockmod.c6
-rw-r--r--arch/x86/kernel/cpu/cpufreq/powernow-k8.c13
-rw-r--r--arch/x86/kernel/cpu/mtrr/main.c10
-rw-r--r--arch/x86/kernel/cpu/perf_event_p4.c23
-rw-r--r--arch/x86/kernel/early-quirks.c16
-rw-r--r--arch/x86/kernel/head_32.S30
-rw-r--r--arch/x86/kernel/irq.c3
-rw-r--r--arch/x86/kernel/process.c24
-rw-r--r--arch/x86/kernel/reboot.c8
-rw-r--r--arch/x86/kernel/smpboot.c8
-rw-r--r--arch/x86/kvm/svm.c4
-rw-r--r--arch/x86/mm/pageattr.c8
-rw-r--r--arch/x86/platform/olpc/olpc_dt.c3
398 files changed, 8694 insertions, 4296 deletions
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 47f63d48014..cc31bec2e31 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -11,6 +11,7 @@ config ALPHA
select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_PROBE
select AUTO_IRQ_AFFINITY if SMP
+ select GENERIC_HARDIRQS_NO_DEPRECATED
help
The Alpha is a 64-bit general-purpose processor designed and
marketed by the Digital Equipment Corporation of blessed memory,
diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c
index 9ab234f48dd..a19d6008229 100644
--- a/arch/alpha/kernel/irq.c
+++ b/arch/alpha/kernel/irq.c
@@ -44,11 +44,16 @@ static char irq_user_affinity[NR_IRQS];
int irq_select_affinity(unsigned int irq)
{
- struct irq_desc *desc = irq_to_desc[irq];
+ struct irq_data *data = irq_get_irq_data(irq);
+ struct irq_chip *chip;
static int last_cpu;
int cpu = last_cpu + 1;
- if (!desc || !get_irq_desc_chip(desc)->set_affinity || irq_user_affinity[irq])
+ if (!data)
+ return 1;
+ chip = irq_data_get_irq_chip(data);
+
+ if (!chip->irq_set_affinity || irq_user_affinity[irq])
return 1;
while (!cpu_possible(cpu) ||
@@ -56,8 +61,8 @@ int irq_select_affinity(unsigned int irq)
cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
last_cpu = cpu;
- cpumask_copy(desc->affinity, cpumask_of(cpu));
- get_irq_desc_chip(desc)->set_affinity(irq, cpumask_of(cpu));
+ cpumask_copy(data->affinity, cpumask_of(cpu));
+ chip->irq_set_affinity(data, cpumask_of(cpu), false);
return 0;
}
#endif /* CONFIG_SMP */
diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c
index 2d0679b6093..411ca11d0a1 100644
--- a/arch/alpha/kernel/irq_alpha.c
+++ b/arch/alpha/kernel/irq_alpha.c
@@ -228,14 +228,9 @@ struct irqaction timer_irqaction = {
void __init
init_rtc_irq(void)
{
- struct irq_desc *desc = irq_to_desc(RTC_IRQ);
-
- if (desc) {
- desc->status |= IRQ_DISABLED;
- set_irq_chip_and_handler_name(RTC_IRQ, &no_irq_chip,
- handle_simple_irq, "RTC");
- setup_irq(RTC_IRQ, &timer_irqaction);
- }
+ set_irq_chip_and_handler_name(RTC_IRQ, &no_irq_chip,
+ handle_simple_irq, "RTC");
+ setup_irq(RTC_IRQ, &timer_irqaction);
}
/* Dummy irqactions. */
diff --git a/arch/alpha/kernel/irq_i8259.c b/arch/alpha/kernel/irq_i8259.c
index 956ea0ed169..c7cc9813e45 100644
--- a/arch/alpha/kernel/irq_i8259.c
+++ b/arch/alpha/kernel/irq_i8259.c
@@ -33,10 +33,10 @@ i8259_update_irq_hw(unsigned int irq, unsigned long mask)
}
inline void
-i8259a_enable_irq(unsigned int irq)
+i8259a_enable_irq(struct irq_data *d)
{
spin_lock(&i8259_irq_lock);
- i8259_update_irq_hw(irq, cached_irq_mask &= ~(1 << irq));
+ i8259_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
spin_unlock(&i8259_irq_lock);
}
@@ -47,16 +47,18 @@ __i8259a_disable_irq(unsigned int irq)
}
void
-i8259a_disable_irq(unsigned int irq)
+i8259a_disable_irq(struct irq_data *d)
{
spin_lock(&i8259_irq_lock);
- __i8259a_disable_irq(irq);
+ __i8259a_disable_irq(d->irq);
spin_unlock(&i8259_irq_lock);
}
void
-i8259a_mask_and_ack_irq(unsigned int irq)
+i8259a_mask_and_ack_irq(struct irq_data *d)
{
+ unsigned int irq = d->irq;
+
spin_lock(&i8259_irq_lock);
__i8259a_disable_irq(irq);
@@ -71,9 +73,9 @@ i8259a_mask_and_ack_irq(unsigned int irq)
struct irq_chip i8259a_irq_type = {
.name = "XT-PIC",
- .unmask = i8259a_enable_irq,
- .mask = i8259a_disable_irq,
- .mask_ack = i8259a_mask_and_ack_irq,
+ .irq_unmask = i8259a_enable_irq,
+ .irq_mask = i8259a_disable_irq,
+ .irq_mask_ack = i8259a_mask_and_ack_irq,
};
void __init
diff --git a/arch/alpha/kernel/irq_impl.h b/arch/alpha/kernel/irq_impl.h
index b63ccd7386f..d507a234b05 100644
--- a/arch/alpha/kernel/irq_impl.h
+++ b/arch/alpha/kernel/irq_impl.h
@@ -31,11 +31,9 @@ extern void init_rtc_irq(void);
extern void common_init_isa_dma(void);
-extern void i8259a_enable_irq(unsigned int);
-extern void i8259a_disable_irq(unsigned int);
-extern void i8259a_mask_and_ack_irq(unsigned int);
-extern unsigned int i8259a_startup_irq(unsigned int);
-extern void i8259a_end_irq(unsigned int);
+extern void i8259a_enable_irq(struct irq_data *d);
+extern void i8259a_disable_irq(struct irq_data *d);
+extern void i8259a_mask_and_ack_irq(struct irq_data *d);
extern struct irq_chip i8259a_irq_type;
extern void init_i8259a_irqs(void);
diff --git a/arch/alpha/kernel/irq_pyxis.c b/arch/alpha/kernel/irq_pyxis.c
index 2863458c853..b30227fa7f5 100644
--- a/arch/alpha/kernel/irq_pyxis.c
+++ b/arch/alpha/kernel/irq_pyxis.c
@@ -29,21 +29,21 @@ pyxis_update_irq_hw(unsigned long mask)
}
static inline void
-pyxis_enable_irq(unsigned int irq)
+pyxis_enable_irq(struct irq_data *d)
{
- pyxis_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16));
+ pyxis_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16));
}
static void
-pyxis_disable_irq(unsigned int irq)
+pyxis_disable_irq(struct irq_data *d)
{
- pyxis_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16)));
+ pyxis_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16)));
}
static void
-pyxis_mask_and_ack_irq(unsigned int irq)
+pyxis_mask_and_ack_irq(struct irq_data *d)
{
- unsigned long bit = 1UL << (irq - 16);
+ unsigned long bit = 1UL << (d->irq - 16);
unsigned long mask = cached_irq_mask &= ~bit;
/* Disable the interrupt. */
@@ -58,9 +58,9 @@ pyxis_mask_and_ack_irq(unsigned int irq)
static struct irq_chip pyxis_irq_type = {
.name = "PYXIS",
- .mask_ack = pyxis_mask_and_ack_irq,
- .mask = pyxis_disable_irq,
- .unmask = pyxis_enable_irq,
+ .irq_mask_ack = pyxis_mask_and_ack_irq,
+ .irq_mask = pyxis_disable_irq,
+ .irq_unmask = pyxis_enable_irq,
};
void
@@ -103,7 +103,7 @@ init_pyxis_irqs(unsigned long ignore_mask)
if ((ignore_mask >> i) & 1)
continue;
set_irq_chip_and_handler(i, &pyxis_irq_type, handle_level_irq);
- irq_to_desc(i)->status |= IRQ_LEVEL;
+ irq_set_status_flags(i, IRQ_LEVEL);
}
setup_irq(16+7, &isa_cascade_irqaction);
diff --git a/arch/alpha/kernel/irq_srm.c b/arch/alpha/kernel/irq_srm.c
index 0e57e828b41..82a47bba41c 100644
--- a/arch/alpha/kernel/irq_srm.c
+++ b/arch/alpha/kernel/irq_srm.c
@@ -18,27 +18,27 @@
DEFINE_SPINLOCK(srm_irq_lock);
static inline void
-srm_enable_irq(unsigned int irq)
+srm_enable_irq(struct irq_data *d)
{
spin_lock(&srm_irq_lock);
- cserve_ena(irq - 16);
+ cserve_ena(d->irq - 16);
spin_unlock(&srm_irq_lock);
}
static void
-srm_disable_irq(unsigned int irq)
+srm_disable_irq(struct irq_data *d)
{
spin_lock(&srm_irq_lock);
- cserve_dis(irq - 16);
+ cserve_dis(d->irq - 16);
spin_unlock(&srm_irq_lock);
}
/* Handle interrupts from the SRM, assuming no additional weirdness. */
static struct irq_chip srm_irq_type = {
.name = "SRM",
- .unmask = srm_enable_irq,
- .mask = srm_disable_irq,
- .mask_ack = srm_disable_irq,
+ .irq_unmask = srm_enable_irq,
+ .irq_mask = srm_disable_irq,
+ .irq_mask_ack = srm_disable_irq,
};
void __init
@@ -52,7 +52,7 @@ init_srm_irqs(long max, unsigned long ignore_mask)
if (i < 64 && ((ignore_mask >> i) & 1))
continue;
set_irq_chip_and_handler(i, &srm_irq_type, handle_level_irq);
- irq_to_desc(i)->status |= IRQ_LEVEL;
+ irq_set_status_flags(i, IRQ_LEVEL);
}
}
diff --git a/arch/alpha/kernel/sys_alcor.c b/arch/alpha/kernel/sys_alcor.c
index 7bef6176823..88d95e872f5 100644
--- a/arch/alpha/kernel/sys_alcor.c
+++ b/arch/alpha/kernel/sys_alcor.c
@@ -44,31 +44,31 @@ alcor_update_irq_hw(unsigned long mask)
}
static inline void
-alcor_enable_irq(unsigned int irq)
+alcor_enable_irq(struct irq_data *d)
{
- alcor_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16));
+ alcor_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16));
}
static void
-alcor_disable_irq(unsigned int irq)
+alcor_disable_irq(struct irq_data *d)
{
- alcor_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16)));
+ alcor_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16)));
}
static void
-alcor_mask_and_ack_irq(unsigned int irq)
+alcor_mask_and_ack_irq(struct irq_data *d)
{
- alcor_disable_irq(irq);
+ alcor_disable_irq(d);
/* On ALCOR/XLT, need to dismiss interrupt via GRU. */
- *(vuip)GRU_INT_CLEAR = 1 << (irq - 16); mb();
+ *(vuip)GRU_INT_CLEAR = 1 << (d->irq - 16); mb();
*(vuip)GRU_INT_CLEAR = 0; mb();
}
static void
-alcor_isa_mask_and_ack_irq(unsigned int irq)
+alcor_isa_mask_and_ack_irq(struct irq_data *d)
{
- i8259a_mask_and_ack_irq(irq);
+ i8259a_mask_and_ack_irq(d);
/* On ALCOR/XLT, need to dismiss interrupt via GRU. */
*(vuip)GRU_INT_CLEAR = 0x80000000; mb();
@@ -77,9 +77,9 @@ alcor_isa_mask_and_ack_irq(unsigned int irq)
static struct irq_chip alcor_irq_type = {
.name = "ALCOR",
- .unmask = alcor_enable_irq,
- .mask = alcor_disable_irq,
- .mask_ack = alcor_mask_and_ack_irq,
+ .irq_unmask = alcor_enable_irq,
+ .irq_mask = alcor_disable_irq,
+ .irq_mask_ack = alcor_mask_and_ack_irq,
};
static void
@@ -126,9 +126,9 @@ alcor_init_irq(void)
if (i >= 16+20 && i <= 16+30)
continue;
set_irq_chip_and_handler(i, &alcor_irq_type, handle_level_irq);
- irq_to_desc(i)->status |= IRQ_LEVEL;
+ irq_set_status_flags(i, IRQ_LEVEL);
}
- i8259a_irq_type.ack = alcor_isa_mask_and_ack_irq;
+ i8259a_irq_type.irq_ack = alcor_isa_mask_and_ack_irq;
init_i8259a_irqs();
common_init_isa_dma();
diff --git a/arch/alpha/kernel/sys_cabriolet.c b/arch/alpha/kernel/sys_cabriolet.c
index b0c916493ae..57eb6307bc2 100644
--- a/arch/alpha/kernel/sys_cabriolet.c
+++ b/arch/alpha/kernel/sys_cabriolet.c
@@ -46,22 +46,22 @@ cabriolet_update_irq_hw(unsigned int irq, unsigned long mask)
}
static inline void
-cabriolet_enable_irq(unsigned int irq)
+cabriolet_enable_irq(struct irq_data *d)
{
- cabriolet_update_irq_hw(irq, cached_irq_mask &= ~(1UL << irq));
+ cabriolet_update_irq_hw(d->irq, cached_irq_mask &= ~(1UL << d->irq));
}
static void
-cabriolet_disable_irq(unsigned int irq)
+cabriolet_disable_irq(struct irq_data *d)
{
- cabriolet_update_irq_hw(irq, cached_irq_mask |= 1UL << irq);
+ cabriolet_update_irq_hw(d->irq, cached_irq_mask |= 1UL << d->irq);
}
static struct irq_chip cabriolet_irq_type = {
.name = "CABRIOLET",
- .unmask = cabriolet_enable_irq,
- .mask = cabriolet_disable_irq,
- .mask_ack = cabriolet_disable_irq,
+ .irq_unmask = cabriolet_enable_irq,
+ .irq_mask = cabriolet_disable_irq,
+ .irq_mask_ack = cabriolet_disable_irq,
};
static void
@@ -107,7 +107,7 @@ common_init_irq(void (*srm_dev_int)(unsigned long v))
for (i = 16; i < 35; ++i) {
set_irq_chip_and_handler(i, &cabriolet_irq_type,
handle_level_irq);
- irq_to_desc(i)->status |= IRQ_LEVEL;
+ irq_set_status_flags(i, IRQ_LEVEL);
}
}
diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c
index edad5f759cc..481df4ecb65 100644
--- a/arch/alpha/kernel/sys_dp264.c
+++ b/arch/alpha/kernel/sys_dp264.c
@@ -98,37 +98,37 @@ tsunami_update_irq_hw(unsigned long mask)
}
static void
-dp264_enable_irq(unsigned int irq)
+dp264_enable_irq(struct irq_data *d)
{
spin_lock(&dp264_irq_lock);
- cached_irq_mask |= 1UL << irq;
+ cached_irq_mask |= 1UL << d->irq;
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
}
static void
-dp264_disable_irq(unsigned int irq)
+dp264_disable_irq(struct irq_data *d)
{
spin_lock(&dp264_irq_lock);
- cached_irq_mask &= ~(1UL << irq);
+ cached_irq_mask &= ~(1UL << d->irq);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
}
static void
-clipper_enable_irq(unsigned int irq)
+clipper_enable_irq(struct irq_data *d)
{
spin_lock(&dp264_irq_lock);
- cached_irq_mask |= 1UL << (irq - 16);
+ cached_irq_mask |= 1UL << (d->irq - 16);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
}
static void
-clipper_disable_irq(unsigned int irq)
+clipper_disable_irq(struct irq_data *d)
{
spin_lock(&dp264_irq_lock);
- cached_irq_mask &= ~(1UL << (irq - 16));
+ cached_irq_mask &= ~(1UL << (d->irq - 16));
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
}
@@ -149,10 +149,11 @@ cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
}
static int
-dp264_set_affinity(unsigned int irq, const struct cpumask *affinity)
-{
+dp264_set_affinity(struct irq_data *d, const struct cpumask *affinity,
+ bool force)
+{
spin_lock(&dp264_irq_lock);
- cpu_set_irq_affinity(irq, *affinity);
+ cpu_set_irq_affinity(d->irq, *affinity);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
@@ -160,10 +161,11 @@ dp264_set_affinity(unsigned int irq, const struct cpumask *affinity)
}
static int
-clipper_set_affinity(unsigned int irq, const struct cpumask *affinity)
-{
+clipper_set_affinity(struct irq_data *d, const struct cpumask *affinity,
+ bool force)
+{
spin_lock(&dp264_irq_lock);
- cpu_set_irq_affinity(irq - 16, *affinity);
+ cpu_set_irq_affinity(d->irq - 16, *affinity);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
@@ -171,19 +173,19 @@ clipper_set_affinity(unsigned int irq, const struct cpumask *affinity)
}
static struct irq_chip dp264_irq_type = {
- .name = "DP264",
- .unmask = dp264_enable_irq,
- .mask = dp264_disable_irq,
- .mask_ack = dp264_disable_irq,
- .set_affinity = dp264_set_affinity,
+ .name = "DP264",
+ .irq_unmask = dp264_enable_irq,
+ .irq_mask = dp264_disable_irq,
+ .irq_mask_ack = dp264_disable_irq,
+ .irq_set_affinity = dp264_set_affinity,
};
static struct irq_chip clipper_irq_type = {
- .name = "CLIPPER",
- .unmask = clipper_enable_irq,
- .mask = clipper_disable_irq,
- .mask_ack = clipper_disable_irq,
- .set_affinity = clipper_set_affinity,
+ .name = "CLIPPER",
+ .irq_unmask = clipper_enable_irq,
+ .irq_mask = clipper_disable_irq,
+ .irq_mask_ack = clipper_disable_irq,
+ .irq_set_affinity = clipper_set_affinity,
};
static void
@@ -268,8 +270,8 @@ init_tsunami_irqs(struct irq_chip * ops, int imin, int imax)
{
long i;
for (i = imin; i <= imax; ++i) {
- irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, ops, handle_level_irq);
+ irq_set_status_flags(i, IRQ_LEVEL);
}
}
diff --git a/arch/alpha/kernel/sys_eb64p.c b/arch/alpha/kernel/sys_eb64p.c
index ae5f29d127b..402e908ffb3 100644
--- a/arch/alpha/kernel/sys_eb64p.c
+++ b/arch/alpha/kernel/sys_eb64p.c
@@ -44,22 +44,22 @@ eb64p_update_irq_hw(unsigned int irq, unsigned long mask)
}
static inline void
-eb64p_enable_irq(unsigned int irq)
+eb64p_enable_irq(struct irq_data *d)
{
- eb64p_update_irq_hw(irq, cached_irq_mask &= ~(1 << irq));
+ eb64p_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
}
static void
-eb64p_disable_irq(unsigned int irq)
+eb64p_disable_irq(struct irq_data *d)
{
- eb64p_update_irq_hw(irq, cached_irq_mask |= 1 << irq);
+ eb64p_update_irq_hw(d->irq, cached_irq_mask |= 1 << d->irq);
}
static struct irq_chip eb64p_irq_type = {
.name = "EB64P",
- .unmask = eb64p_enable_irq,
- .mask = eb64p_disable_irq,
- .mask_ack = eb64p_disable_irq,
+ .irq_unmask = eb64p_enable_irq,
+ .irq_mask = eb64p_disable_irq,
+ .irq_mask_ack = eb64p_disable_irq,
};
static void
@@ -118,9 +118,9 @@ eb64p_init_irq(void)
init_i8259a_irqs();
for (i = 16; i < 32; ++i) {
- irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &eb64p_irq_type, handle_level_irq);
- }
+ irq_set_status_flags(i, IRQ_LEVEL);
+ }
common_init_isa_dma();
setup_irq(16+5, &isa_cascade_irqaction);
diff --git a/arch/alpha/kernel/sys_eiger.c b/arch/alpha/kernel/sys_eiger.c
index 1121bc5c6c6..0b44a54c152 100644
--- a/arch/alpha/kernel/sys_eiger.c
+++ b/arch/alpha/kernel/sys_eiger.c
@@ -51,16 +51,18 @@ eiger_update_irq_hw(unsigned long irq, unsigned long mask)
}
static inline void
-eiger_enable_irq(unsigned int irq)
+eiger_enable_irq(struct irq_data *d)
{
+ unsigned int irq = d->irq;
unsigned long mask;
mask = (cached_irq_mask[irq >= 64] &= ~(1UL << (irq & 63)));
eiger_update_irq_hw(irq, mask);
}
static void
-eiger_disable_irq(unsigned int irq)
+eiger_disable_irq(struct irq_data *d)
{
+ unsigned int irq = d->irq;
unsigned long mask;
mask = (cached_irq_mask[irq >= 64] |= 1UL << (irq & 63));
eiger_update_irq_hw(irq, mask);
@@ -68,9 +70,9 @@ eiger_disable_irq(unsigned int irq)
static struct irq_chip eiger_irq_type = {
.name = "EIGER",
- .unmask = eiger_enable_irq,
- .mask = eiger_disable_irq,
- .mask_ack = eiger_disable_irq,
+ .irq_unmask = eiger_enable_irq,
+ .irq_mask = eiger_disable_irq,
+ .irq_mask_ack = eiger_disable_irq,
};
static void
@@ -136,8 +138,8 @@ eiger_init_irq(void)
init_i8259a_irqs();
for (i = 16; i < 128; ++i) {
- irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &eiger_irq_type, handle_level_irq);
+ irq_set_status_flags(i, IRQ_LEVEL);
}
}
diff --git a/arch/alpha/kernel/sys_jensen.c b/arch/alpha/kernel/sys_jensen.c
index 34f55e03d33..00341b75c8b 100644
--- a/arch/alpha/kernel/sys_jensen.c
+++ b/arch/alpha/kernel/sys_jensen.c
@@ -63,34 +63,34 @@
*/
static void
-jensen_local_enable(unsigned int irq)
+jensen_local_enable(struct irq_data *d)
{
/* the parport is really hw IRQ 1, silly Jensen. */
- if (irq == 7)
- i8259a_enable_irq(1);
+ if (d->irq == 7)
+ i8259a_enable_irq(d);
}
static void
-jensen_local_disable(unsigned int irq)
+jensen_local_disable(struct irq_data *d)
{
/* the parport is really hw IRQ 1, silly Jensen. */
- if (irq == 7)
- i8259a_disable_irq(1);
+ if (d->irq == 7)
+ i8259a_disable_irq(d);
}
static void
-jensen_local_mask_ack(unsigned int irq)
+jensen_local_mask_ack(struct irq_data *d)
{
/* the parport is really hw IRQ 1, silly Jensen. */
- if (irq == 7)
- i8259a_mask_and_ack_irq(1);
+ if (d->irq == 7)
+ i8259a_mask_and_ack_irq(d);
}
static struct irq_chip jensen_local_irq_type = {
.name = "LOCAL",
- .unmask = jensen_local_enable,
- .mask = jensen_local_disable,
- .mask_ack = jensen_local_mask_ack,
+ .irq_unmask = jensen_local_enable,
+ .irq_mask = jensen_local_disable,
+ .irq_mask_ack = jensen_local_mask_ack,
};
static void
diff --git a/arch/alpha/kernel/sys_marvel.c b/arch/alpha/kernel/sys_marvel.c
index 2bfc9f1b1dd..e61910734e4 100644
--- a/arch/alpha/kernel/sys_marvel.c
+++ b/arch/alpha/kernel/sys_marvel.c
@@ -104,9 +104,10 @@ io7_get_irq_ctl(unsigned int irq, struct io7 **pio7)
}
static void
-io7_enable_irq(unsigned int irq)
+io7_enable_irq(struct irq_data *d)
{
volatile unsigned long *ctl;
+ unsigned int irq = d->irq;
struct io7 *io7;
ctl = io7_get_irq_ctl(irq, &io7);
@@ -115,7 +116,7 @@ io7_enable_irq(unsigned int irq)
__func__, irq);
return;
}
-
+
spin_lock(&io7->irq_lock);
*ctl |= 1UL << 24;
mb();
@@ -124,9 +125,10 @@ io7_enable_irq(unsigned int irq)
}
static void
-io7_disable_irq(unsigned int irq)
+io7_disable_irq(struct irq_data *d)
{
volatile unsigned long *ctl;
+ unsigned int irq = d->irq;
struct io7 *io7;
ctl = io7_get_irq_ctl(irq, &io7);
@@ -135,7 +137,7 @@ io7_disable_irq(unsigned int irq)
__func__, irq);
return;
}
-
+
spin_lock(&io7->irq_lock);
*ctl &= ~(1UL << 24);
mb();
@@ -144,35 +146,29 @@ io7_disable_irq(unsigned int irq)
}
static void
-marvel_irq_noop(unsigned int irq)
-{
- return;
-}
-
-static unsigned int
-marvel_irq_noop_return(unsigned int irq)
-{
- return 0;
+marvel_irq_noop(struct irq_data *d)
+{
+ return;
}
static struct irq_chip marvel_legacy_irq_type = {
.name = "LEGACY",
- .mask = marvel_irq_noop,
- .unmask = marvel_irq_noop,
+ .irq_mask = marvel_irq_noop,
+ .irq_unmask = marvel_irq_noop,
};
static struct irq_chip io7_lsi_irq_type = {
.name = "LSI",
- .unmask = io7_enable_irq,
- .mask = io7_disable_irq,
- .mask_ack = io7_disable_irq,
+ .irq_unmask = io7_enable_irq,
+ .irq_mask = io7_disable_irq,
+ .irq_mask_ack = io7_disable_irq,
};
static struct irq_chip io7_msi_irq_type = {
.name = "MSI",
- .unmask = io7_enable_irq,
- .mask = io7_disable_irq,
- .ack = marvel_irq_noop,
+ .irq_unmask = io7_enable_irq,
+ .irq_mask = io7_disable_irq,
+ .irq_ack = marvel_irq_noop,
};
static void
@@ -280,8 +276,8 @@ init_io7_irqs(struct io7 *io7,
/* Set up the lsi irqs. */
for (i = 0; i < 128; ++i) {
- irq_to_desc(base + i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(base + i, lsi_ops, handle_level_irq);
+ irq_set_status_flags(i, IRQ_LEVEL);
}
/* Disable the implemented irqs in hardware. */
@@ -294,8 +290,8 @@ init_io7_irqs(struct io7 *io7,
/* Set up the msi irqs. */
for (i = 128; i < (128 + 512); ++i) {
- irq_to_desc(base + i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(base + i, msi_ops, handle_level_irq);
+ irq_set_status_flags(i, IRQ_LEVEL);
}
for (i = 0; i < 16; ++i)
diff --git a/arch/alpha/kernel/sys_mikasa.c b/arch/alpha/kernel/sys_mikasa.c
index bcc1639e8ef..cf7f43dd314 100644
--- a/arch/alpha/kernel/sys_mikasa.c
+++ b/arch/alpha/kernel/sys_mikasa.c
@@ -43,22 +43,22 @@ mikasa_update_irq_hw(int mask)
}
static inline void
-mikasa_enable_irq(unsigned int irq)
+mikasa_enable_irq(struct irq_data *d)
{
- mikasa_update_irq_hw(cached_irq_mask |= 1 << (irq - 16));
+ mikasa_update_irq_hw(cached_irq_mask |= 1 << (d->irq - 16));
}
static void
-mikasa_disable_irq(unsigned int irq)
+mikasa_disable_irq(struct irq_data *d)
{
- mikasa_update_irq_hw(cached_irq_mask &= ~(1 << (irq - 16)));
+ mikasa_update_irq_hw(cached_irq_mask &= ~(1 << (d->irq - 16)));
}
static struct irq_chip mikasa_irq_type = {
.name = "MIKASA",
- .unmask = mikasa_enable_irq,
- .mask = mikasa_disable_irq,
- .mask_ack = mikasa_disable_irq,
+ .irq_unmask = mikasa_enable_irq,
+ .irq_mask = mikasa_disable_irq,
+ .irq_mask_ack = mikasa_disable_irq,
};
static void
@@ -98,8 +98,8 @@ mikasa_init_irq(void)
mikasa_update_irq_hw(0);
for (i = 16; i < 32; ++i) {
- irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &mikasa_irq_type, handle_level_irq);
+ irq_set_status_flags(i, IRQ_LEVEL);
}
init_i8259a_irqs();
diff --git a/arch/alpha/kernel/sys_noritake.c b/arch/alpha/kernel/sys_noritake.c
index e88f4ae1260..92bc188e94a 100644
--- a/arch/alpha/kernel/sys_noritake.c
+++ b/arch/alpha/kernel/sys_noritake.c
@@ -48,22 +48,22 @@ noritake_update_irq_hw(int irq, int mask)
}
static void
-noritake_enable_irq(unsigned int irq)
+noritake_enable_irq(struct irq_data *d)
{
- noritake_update_irq_hw(irq, cached_irq_mask |= 1 << (irq - 16));
+ noritake_update_irq_hw(d->irq, cached_irq_mask |= 1 << (d->irq - 16));
}
static void
-noritake_disable_irq(unsigned int irq)
+noritake_disable_irq(struct irq_data *d)
{
- noritake_update_irq_hw(irq, cached_irq_mask &= ~(1 << (irq - 16)));
+ noritake_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << (d->irq - 16)));
}
static struct irq_chip noritake_irq_type = {
.name = "NORITAKE",
- .unmask = noritake_enable_irq,
- .mask = noritake_disable_irq,
- .mask_ack = noritake_disable_irq,
+ .irq_unmask = noritake_enable_irq,
+ .irq_mask = noritake_disable_irq,
+ .irq_mask_ack = noritake_disable_irq,
};
static void
@@ -127,8 +127,8 @@ noritake_init_irq(void)
outw(0, 0x54c);
for (i = 16; i < 48; ++i) {
- irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &noritake_irq_type, handle_level_irq);
+ irq_set_status_flags(i, IRQ_LEVEL);
}
init_i8259a_irqs();
diff --git a/arch/alpha/kernel/sys_rawhide.c b/arch/alpha/kernel/sys_rawhide.c
index 6a51364dd1c..936d4140ed5 100644
--- a/arch/alpha/kernel/sys_rawhide.c
+++ b/arch/alpha/kernel/sys_rawhide.c
@@ -56,9 +56,10 @@ rawhide_update_irq_hw(int hose, int mask)
(((h) < MCPCIA_MAX_HOSES) && (cached_irq_masks[(h)] != 0))
static inline void
-rawhide_enable_irq(unsigned int irq)
+rawhide_enable_irq(struct irq_data *d)
{
unsigned int mask, hose;
+ unsigned int irq = d->irq;
irq -= 16;
hose = irq / 24;
@@ -76,9 +77,10 @@ rawhide_enable_irq(unsigned int irq)
}
static void
-rawhide_disable_irq(unsigned int irq)
+rawhide_disable_irq(struct irq_data *d)
{
unsigned int mask, hose;
+ unsigned int irq = d->irq;
irq -= 16;
hose = irq / 24;
@@ -96,9 +98,10 @@ rawhide_disable_irq(unsigned int irq)
}
static void
-rawhide_mask_and_ack_irq(unsigned int irq)
+rawhide_mask_and_ack_irq(struct irq_data *d)
{
unsigned int mask, mask1, hose;
+ unsigned int irq = d->irq;
irq -= 16;
hose = irq / 24;
@@ -123,9 +126,9 @@ rawhide_mask_and_ack_irq(unsigned int irq)
static struct irq_chip rawhide_irq_type = {
.name = "RAWHIDE",
- .unmask = rawhide_enable_irq,
- .mask = rawhide_disable_irq,
- .mask_ack = rawhide_mask_and_ack_irq,
+ .irq_unmask = rawhide_enable_irq,
+ .irq_mask = rawhide_disable_irq,
+ .irq_mask_ack = rawhide_mask_and_ack_irq,
};
static void
@@ -177,8 +180,8 @@ rawhide_init_irq(void)
}
for (i = 16; i < 128; ++i) {
- irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &rawhide_irq_type, handle_level_irq);
+ irq_set_status_flags(i, IRQ_LEVEL);
}
init_i8259a_irqs();
diff --git a/arch/alpha/kernel/sys_rx164.c b/arch/alpha/kernel/sys_rx164.c
index 89e7e37ec84..cea22a62913 100644
--- a/arch/alpha/kernel/sys_rx164.c
+++ b/arch/alpha/kernel/sys_rx164.c
@@ -47,22 +47,22 @@ rx164_update_irq_hw(unsigned long mask)
}
static inline void
-rx164_enable_irq(unsigned int irq)
+rx164_enable_irq(struct irq_data *d)
{
- rx164_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16));
+ rx164_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16));
}
static void
-rx164_disable_irq(unsigned int irq)
+rx164_disable_irq(struct irq_data *d)
{
- rx164_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16)));
+ rx164_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16)));
}
static struct irq_chip rx164_irq_type = {
.name = "RX164",
- .unmask = rx164_enable_irq,
- .mask = rx164_disable_irq,
- .mask_ack = rx164_disable_irq,
+ .irq_unmask = rx164_enable_irq,
+ .irq_mask = rx164_disable_irq,
+ .irq_mask_ack = rx164_disable_irq,
};
static void
@@ -99,8 +99,8 @@ rx164_init_irq(void)
rx164_update_irq_hw(0);
for (i = 16; i < 40; ++i) {
- irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &rx164_irq_type, handle_level_irq);
+ irq_set_status_flags(i, IRQ_LEVEL);
}
init_i8259a_irqs();
diff --git a/arch/alpha/kernel/sys_sable.c b/arch/alpha/kernel/sys_sable.c
index 5c4423d1b06..a349538aabc 100644
--- a/arch/alpha/kernel/sys_sable.c
+++ b/arch/alpha/kernel/sys_sable.c
@@ -443,11 +443,11 @@ lynx_swizzle(struct pci_dev *dev, u8 *pinp)
/* GENERIC irq routines */
static inline void
-sable_lynx_enable_irq(unsigned int irq)
+sable_lynx_enable_irq(struct irq_data *d)
{
unsigned long bit, mask;
- bit = sable_lynx_irq_swizzle->irq_to_mask[irq];
+ bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
spin_lock(&sable_lynx_irq_lock);
mask = sable_lynx_irq_swizzle->shadow_mask &= ~(1UL << bit);
sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
@@ -459,11 +459,11 @@ sable_lynx_enable_irq(unsigned int irq)
}
static void
-sable_lynx_disable_irq(unsigned int irq)
+sable_lynx_disable_irq(struct irq_data *d)
{
unsigned long bit, mask;
- bit = sable_lynx_irq_swizzle->irq_to_mask[irq];
+ bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
spin_lock(&sable_lynx_irq_lock);
mask = sable_lynx_irq_swizzle->shadow_mask |= 1UL << bit;
sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
@@ -475,11 +475,11 @@ sable_lynx_disable_irq(unsigned int irq)
}
static void
-sable_lynx_mask_and_ack_irq(unsigned int irq)
+sable_lynx_mask_and_ack_irq(struct irq_data *d)
{
unsigned long bit, mask;
- bit = sable_lynx_irq_swizzle->irq_to_mask[irq];
+ bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
spin_lock(&sable_lynx_irq_lock);
mask = sable_lynx_irq_swizzle->shadow_mask |= 1UL << bit;
sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
@@ -489,9 +489,9 @@ sable_lynx_mask_and_ack_irq(unsigned int irq)
static struct irq_chip sable_lynx_irq_type = {
.name = "SABLE/LYNX",
- .unmask = sable_lynx_enable_irq,
- .mask = sable_lynx_disable_irq,
- .mask_ack = sable_lynx_mask_and_ack_irq,
+ .irq_unmask = sable_lynx_enable_irq,
+ .irq_mask = sable_lynx_disable_irq,
+ .irq_mask_ack = sable_lynx_mask_and_ack_irq,
};
static void
@@ -518,9 +518,9 @@ sable_lynx_init_irq(int nr_of_irqs)
long i;
for (i = 0; i < nr_of_irqs; ++i) {
- irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &sable_lynx_irq_type,
handle_level_irq);
+ irq_set_status_flags(i, IRQ_LEVEL);
}
common_init_isa_dma();
diff --git a/arch/alpha/kernel/sys_takara.c b/arch/alpha/kernel/sys_takara.c
index f8a1e8a862f..42a5331f13c 100644
--- a/arch/alpha/kernel/sys_takara.c
+++ b/arch/alpha/kernel/sys_takara.c
@@ -45,16 +45,18 @@ takara_update_irq_hw(unsigned long irq, unsigned long mask)
}
static inline void
-takara_enable_irq(unsigned int irq)
+takara_enable_irq(struct irq_data *d)
{
+ unsigned int irq = d->irq;
unsigned long mask;
mask = (cached_irq_mask[irq >= 64] &= ~(1UL << (irq & 63)));
takara_update_irq_hw(irq, mask);
}
static void
-takara_disable_irq(unsigned int irq)
+takara_disable_irq(struct irq_data *d)
{
+ unsigned int irq = d->irq;
unsigned long mask;
mask = (cached_irq_mask[irq >= 64] |= 1UL << (irq & 63));
takara_update_irq_hw(irq, mask);
@@ -62,9 +64,9 @@ takara_disable_irq(unsigned int irq)
static struct irq_chip takara_irq_type = {
.name = "TAKARA",
- .unmask = takara_enable_irq,
- .mask = takara_disable_irq,
- .mask_ack = takara_disable_irq,
+ .irq_unmask = takara_enable_irq,
+ .irq_mask = takara_disable_irq,
+ .irq_mask_ack = takara_disable_irq,
};
static void
@@ -136,8 +138,8 @@ takara_init_irq(void)
takara_update_irq_hw(i, -1);
for (i = 16; i < 128; ++i) {
- irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &takara_irq_type, handle_level_irq);
+ irq_set_status_flags(i, IRQ_LEVEL);
}
common_init_isa_dma();
diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c
index e02494bf5ef..f6c108a3d67 100644
--- a/arch/alpha/kernel/sys_titan.c
+++ b/arch/alpha/kernel/sys_titan.c
@@ -112,8 +112,9 @@ titan_update_irq_hw(unsigned long mask)
}
static inline void
-titan_enable_irq(unsigned int irq)
+titan_enable_irq(struct irq_data *d)
{
+ unsigned int irq = d->irq;
spin_lock(&titan_irq_lock);
titan_cached_irq_mask |= 1UL << (irq - 16);
titan_update_irq_hw(titan_cached_irq_mask);
@@ -121,8 +122,9 @@ titan_enable_irq(unsigned int irq)
}
static inline void
-titan_disable_irq(unsigned int irq)
+titan_disable_irq(struct irq_data *d)
{
+ unsigned int irq = d->irq;
spin_lock(&titan_irq_lock);
titan_cached_irq_mask &= ~(1UL << (irq - 16));
titan_update_irq_hw(titan_cached_irq_mask);
@@ -144,7 +146,8 @@ titan_cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
}
static int
-titan_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
+titan_set_irq_affinity(struct irq_data *d, const struct cpumask *affinity,
+ bool force)
{
spin_lock(&titan_irq_lock);
titan_cpu_set_irq_affinity(irq - 16, *affinity);
@@ -175,17 +178,17 @@ init_titan_irqs(struct irq_chip * ops, int imin, int imax)
{
long i;
for (i = imin; i <= imax; ++i) {
- irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, ops, handle_level_irq);
+ irq_set_status_flags(i, IRQ_LEVEL);
}
}
static struct irq_chip titan_irq_type = {
- .name = "TITAN",
- .unmask = titan_enable_irq,
- .mask = titan_disable_irq,
- .mask_ack = titan_disable_irq,
- .set_affinity = titan_set_irq_affinity,
+ .name = "TITAN",
+ .irq_unmask = titan_enable_irq,
+ .irq_mask = titan_disable_irq,
+ .irq_mask_ack = titan_disable_irq,
+ .irq_set_affinity = titan_set_irq_affinity,
};
static irqreturn_t
diff --git a/arch/alpha/kernel/sys_wildfire.c b/arch/alpha/kernel/sys_wildfire.c
index eec52594d41..ca60a387ef0 100644
--- a/arch/alpha/kernel/sys_wildfire.c
+++ b/arch/alpha/kernel/sys_wildfire.c
@@ -104,10 +104,12 @@ wildfire_init_irq_hw(void)
}
static void
-wildfire_enable_irq(unsigned int irq)
+wildfire_enable_irq(struct irq_data *d)
{
+ unsigned int irq = d->irq;
+
if (irq < 16)
- i8259a_enable_irq(irq);
+ i8259a_enable_irq(d);
spin_lock(&wildfire_irq_lock);
set_bit(irq, &cached_irq_mask);
@@ -116,10 +118,12 @@ wildfire_enable_irq(unsigned int irq)
}
static void
-wildfire_disable_irq(unsigned int irq)
+wildfire_disable_irq(struct irq_data *d)
{
+ unsigned int irq = d->irq;
+
if (irq < 16)
- i8259a_disable_irq(irq);
+ i8259a_disable_irq(d);
spin_lock(&wildfire_irq_lock);
clear_bit(irq, &cached_irq_mask);
@@ -128,10 +132,12 @@ wildfire_disable_irq(unsigned int irq)
}
static void
-wildfire_mask_and_ack_irq(unsigned int irq)
+wildfire_mask_and_ack_irq(struct irq_data *d)
{
+ unsigned int irq = d->irq;
+
if (irq < 16)
- i8259a_mask_and_ack_irq(irq);
+ i8259a_mask_and_ack_irq(d);
spin_lock(&wildfire_irq_lock);
clear_bit(irq, &cached_irq_mask);
@@ -141,9 +147,9 @@ wildfire_mask_and_ack_irq(unsigned int irq)
static struct irq_chip wildfire_irq_type = {
.name = "WILDFIRE",
- .unmask = wildfire_enable_irq,
- .mask = wildfire_disable_irq,
- .mask_ack = wildfire_mask_and_ack_irq,
+ .irq_unmask = wildfire_enable_irq,
+ .irq_mask = wildfire_disable_irq,
+ .irq_mask_ack = wildfire_mask_and_ack_irq,
};
static void __init
@@ -177,21 +183,21 @@ wildfire_init_irq_per_pca(int qbbno, int pcano)
for (i = 0; i < 16; ++i) {
if (i == 2)
continue;
- irq_to_desc(i+irq_bias)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i+irq_bias, &wildfire_irq_type,
handle_level_irq);
+ irq_set_status_flags(i + irq_bias, IRQ_LEVEL);
}
- irq_to_desc(36+irq_bias)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(36+irq_bias, &wildfire_irq_type,
handle_level_irq);
+ irq_set_status_flags(36 + irq_bias, IRQ_LEVEL);
for (i = 40; i < 64; ++i) {
- irq_to_desc(i+irq_bias)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i+irq_bias, &wildfire_irq_type,
handle_level_irq);
+ irq_set_status_flags(i + irq_bias, IRQ_LEVEL);
}
- setup_irq(32+irq_bias, &isa_enable);
+ setup_irq(32+irq_bias, &isa_enable);
}
static void __init
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0233c8ff1f1..48a0628d93e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -7,7 +7,7 @@ config ARM
select HAVE_MEMBLOCK
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
- select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
+ select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL)
@@ -24,7 +24,7 @@ config ARM
select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC
select HAVE_REGS_AND_STACK_ACCESS_API
- select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V7))
+ select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
select HAVE_C_RECORDMCOUNT
select HAVE_GENERIC_HARDIRQS
select HAVE_SPARSE_IRQ
@@ -63,6 +63,10 @@ config GENERIC_CLOCKEVENTS_BROADCAST
depends on GENERIC_CLOCKEVENTS
default y if SMP
+config KTIME_SCALAR
+ bool
+ default y
+
config HAVE_TCM
bool
select GENERIC_ALLOCATOR
@@ -178,11 +182,6 @@ config FIQ
config ARCH_MTD_XIP
bool
-config ARM_L1_CACHE_SHIFT_6
- bool
- help
- Setting ARM L1 cache line size to 64 Bytes.
-
config VECTORS_BASE
hex
default 0xffff0000 if MMU || CPU_HIGH_VECTOR
@@ -362,7 +361,7 @@ config ARCH_FOOTBRIDGE
bool "FootBridge"
select CPU_SA110
select FOOTBRIDGE
- select ARCH_USES_GETTIMEOFFSET
+ select GENERIC_CLOCKEVENTS
help
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
@@ -473,6 +472,7 @@ config ARCH_IXP4XX
config ARCH_DOVE
bool "Marvell Dove"
+ select CPU_V6K
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
@@ -891,6 +891,16 @@ config PLAT_SPEAR
help
Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
+config ARCH_VT8500
+ bool "VIA/WonderMedia 85xx"
+ select CPU_ARM926T
+ select GENERIC_GPIO
+ select ARCH_HAS_CPUFREQ
+ select GENERIC_CLOCKEVENTS
+ select ARCH_REQUIRE_GPIOLIB
+ select HAVE_PWM
+ help
+ Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
endchoice
#
@@ -1023,6 +1033,8 @@ source "arch/arm/mach-versatile/Kconfig"
source "arch/arm/mach-vexpress/Kconfig"
+source "arch/arm/mach-vt8500/Kconfig"
+
source "arch/arm/mach-w90x900/Kconfig"
# Definitions to make life easier
@@ -1064,7 +1076,7 @@ config XSCALE_PMU
default y
config CPU_HAS_PMU
- depends on (CPU_V6 || CPU_V7 || XSCALE_PMU) && \
+ depends on (CPU_V6 || CPU_V6K || CPU_V7 || XSCALE_PMU) && \
(!ARCH_OMAP3 || OMAP3_EMU)
default y
bool
@@ -1080,7 +1092,7 @@ endif
config ARM_ERRATA_411920
bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
- depends on CPU_V6
+ depends on CPU_V6 || CPU_V6K
help
Invalidation of the Instruction Cache operation can
fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
@@ -1156,7 +1168,7 @@ config ARM_ERRATA_742231
config PL310_ERRATA_588369
bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
- depends on CACHE_L2X0 && ARCH_OMAP4
+ depends on CACHE_L2X0
help
The PL310 L2 cache controller implements three types of Clean &
Invalidate maintenance operations: by Physical Address
@@ -1165,8 +1177,7 @@ config PL310_ERRATA_588369
clean operation followed immediately by an invalidate operation,
both performing to the same memory location. This functionality
is not correctly implemented in PL310 as clean lines are not
- invalidated as a result of these operations. Note that this errata
- uses Texas Instrument's secure monitor api.
+ invalidated as a result of these operations.
config ARM_ERRATA_720789
bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
@@ -1180,6 +1191,17 @@ config ARM_ERRATA_720789
tables. The workaround changes the TLB flushing routines to invalidate
entries regardless of the ASID.
+config PL310_ERRATA_727915
+ bool "Background Clean & Invalidate by Way operation can cause data corruption"
+ depends on CACHE_L2X0
+ help
+ PL310 implements the Clean & Invalidate by Way L2 cache maintenance
+ operation (offset 0x7FC). This operation runs in background so that
+ PL310 can handle normal accesses while it is in progress. Under very
+ rare circumstances, due to this erratum, write data can be lost when
+ PL310 treats a cacheable write transaction during a Clean &
+ Invalidate by Way operation.
+
config ARM_ERRATA_743622
bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
depends on CPU_V7
@@ -1193,6 +1215,53 @@ config ARM_ERRATA_743622
visible impact on the overall performance or power consumption of the
processor.
+config ARM_ERRATA_751472
+ bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
+ depends on CPU_V7 && SMP
+ help
+ This option enables the workaround for the 751472 Cortex-A9 (prior
+ to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
+ completion of a following broadcasted operation if the second
+ operation is received by a CPU before the ICIALLUIS has completed,
+ potentially leading to corrupted entries in the cache or TLB.
+
+config ARM_ERRATA_753970
+ bool "ARM errata: cache sync operation may be faulty"
+ depends on CACHE_PL310
+ help
+ This option enables the workaround for the 753970 PL310 (r3p0) erratum.
+
+ Under some condition the effect of cache sync operation on
+ the store buffer still remains when the operation completes.
+ This means that the store buffer is always asked to drain and
+ this prevents it from merging any further writes. The workaround
+ is to replace the normal offset of cache sync operation (0x730)
+ by another offset targeting an unmapped PL310 register 0x740.
+ This has the same effect as the cache sync operation: store buffer
+ drain and waiting for all buffers empty.
+
+config ARM_ERRATA_754322
+ bool "ARM errata: possible faulty MMU translations following an ASID switch"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 754322 Cortex-A9 (r2p*,
+ r3p*) erratum. A speculative memory access may cause a page table walk
+ which starts prior to an ASID switch but completes afterwards. This
+ can populate the micro-TLB with a stale entry which may be hit with
+ the new ASID. This workaround places two dsb instructions in the mm
+ switching code so that no page table walks can cross the ASID switch.
+
+config ARM_ERRATA_754327
+ bool "ARM errata: no automatic Store Buffer drain"
+ depends on CPU_V7 && SMP
+ help
+ This option enables the workaround for the 754327 Cortex-A9 (prior to
+ r2p0) erratum. The Store Buffer does not have any automatic draining
+ mechanism and therefore a livelock may occur if an external agent
+ continuously polls a memory location waiting to observe an update.
+ This workaround defines cpu_relax() as smp_mb(), preventing correctly
+ written polling loops from denying visibility of updates to memory.
+
endmenu
source "arch/arm/common/Kconfig"
@@ -1266,6 +1335,7 @@ source "kernel/time/Kconfig"
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
depends on EXPERIMENTAL
+ depends on CPU_V6K || CPU_V7
depends on GENERIC_CLOCKEVENTS
depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
@@ -1377,7 +1447,7 @@ config HZ
config THUMB2_KERNEL
bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)"
- depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL
+ depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL
select AEABI
select ARM_ASM_UNIFIED
help
@@ -1387,6 +1457,37 @@ config THUMB2_KERNEL
If unsure, say N.
+config THUMB2_AVOID_R_ARM_THM_JUMP11
+ bool "Work around buggy Thumb-2 short branch relocations in gas"
+ depends on THUMB2_KERNEL && MODULES
+ default y
+ help
+ Various binutils versions can resolve Thumb-2 branches to
+ locally-defined, preemptible global symbols as short-range "b.n"
+ branch instructions.
+
+ This is a problem, because there's no guarantee the final
+ destination of the symbol, or any candidate locations for a
+ trampoline, are within range of the branch. For this reason, the
+ kernel does not support fixing up the R_ARM_THM_JUMP11 (102)
+ relocation in modules at all, and it makes little sense to add
+ support.
+
+ The symptom is that the kernel fails with an "unsupported
+ relocation" error when loading some modules.
+
+ Until fixed tools are available, passing
+ -fno-optimize-sibling-calls to gcc should prevent gcc generating
+ code which hits this problem, at the cost of a bit of extra runtime
+ stack usage in some cases.
+
+ The problem is described in more detail at:
+ https://bugs.launchpad.net/binutils-linaro/+bug/725126
+
+ Only Thumb-2 kernels are affected.
+
+ Unless you are sure your tools don't have this problem, say Y.
+
config ARM_ASM_UNIFIED
bool
@@ -1407,7 +1508,7 @@ config AEABI
config OABI_COMPAT
bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
- depends on AEABI && EXPERIMENTAL
+ depends on AEABI && EXPERIMENTAL && !THUMB2_KERNEL
default y
help
This option preserves the old syscall interface along with the
@@ -1635,6 +1736,18 @@ config ZBOOT_ROM
Say Y here if you intend to execute your compressed kernel image
(zImage) directly from ROM or flash. If unsure, say N.
+config ZBOOT_ROM_MMCIF
+ bool "Include MMCIF loader in zImage (EXPERIMENTAL)"
+ depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL
+ help
+ Say Y here to include experimental MMCIF loading code in the
+ ROM-able zImage. With this enabled it is possible to write the
+ the ROM-able zImage kernel image to an MMC card and boot the
+ kernel straight from the reset vector. At reset the processor
+ Mask ROM will load the first part of the the ROM-able zImage
+ which in turn loads the rest the kernel image to RAM using the
+ MMCIF hardware block.
+
config CMDLINE
string "Default kernel command string"
default ""
@@ -1868,7 +1981,7 @@ config FPE_FASTFPE
config VFP
bool "VFP-format floating point maths"
- depends on CPU_V6 || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
+ depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
help
Say Y to include VFP support code in the kernel. This is needed
if your hardware includes a VFP unit.
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c22c1adfedd..1e20c414d5c 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -15,7 +15,7 @@ ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
LDFLAGS_vmlinux += --be8
endif
-OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
+OBJCOPYFLAGS :=-O binary -R .comment -S
GZFLAGS :=-9
#KBUILD_CFLAGS +=-pipe
# Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb:
@@ -89,6 +89,7 @@ tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110)
tune-$(CONFIG_CPU_XSC3) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
tune-$(CONFIG_CPU_FEROCEON) :=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
tune-$(CONFIG_CPU_V6) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
+tune-$(CONFIG_CPU_V6K) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
ifeq ($(CONFIG_AEABI),y)
CFLAGS_ABI :=-mabi=aapcs-linux -mno-thumb-interwork
@@ -105,6 +106,10 @@ AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mau
AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
CFLAGS_THUMB2 :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
AFLAGS_THUMB2 :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
+# Work around buggy relocation from gas if requested:
+ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y)
+CFLAGS_MODULE +=-fno-optimize-sibling-calls
+endif
endif
# Need -Uarm for gcc < 3.x
@@ -190,6 +195,7 @@ machine-$(CONFIG_ARCH_U300) := u300
machine-$(CONFIG_ARCH_U8500) := ux500
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_VEXPRESS) := vexpress
+machine-$(CONFIG_ARCH_VT8500) := vt8500
machine-$(CONFIG_ARCH_W90X900) := w90x900
machine-$(CONFIG_ARCH_NUC93X) := nuc93x
machine-$(CONFIG_FOOTBRIDGE) := footbridge
@@ -280,7 +286,7 @@ bzImage: zImage
zImage Image xipImage bootpImage uImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
-zinstall install: vmlinux
+zinstall uinstall install: vmlinux
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
# We use MRPROPER_FILES and CLEAN_FILES now
@@ -301,6 +307,7 @@ define archhelp
echo ' (supply initrd image via make variable INITRD=<path>)'
echo ' install - Install uncompressed kernel'
echo ' zinstall - Install compressed kernel'
+ echo ' uinstall - Install U-Boot wrapped compressed kernel'
echo ' Install using (your) ~/bin/$(INSTALLKERNEL) or'
echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
echo ' install to $$(INSTALL_PATH) and run lilo'
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 4d26f2c52a7..9128fddf110 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -99,6 +99,10 @@ zinstall: $(obj)/zImage
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
$(obj)/zImage System.map "$(INSTALL_PATH)"
+uinstall: $(obj)/uImage
+ $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+ $(obj)/uImage System.map "$(INSTALL_PATH)"
+
zi:
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
$(obj)/zImage System.map "$(INSTALL_PATH)"
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index ab204db594d..c6028967d33 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -1,3 +1,7 @@
font.c
-piggy.gz
+lib1funcs.S
+piggy.gzip
+piggy.lzo
+piggy.lzma
+vmlinux
vmlinux.lds
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 0a8f748e506..f9f77c65dff 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -4,9 +4,20 @@
# create a compressed vmlinuz image from the original vmlinux
#
+OBJS =
+
+# Ensure that mmcif loader code appears early in the image
+# to minimise that number of bocks that have to be read in
+# order to load it.
+ifeq ($(CONFIG_ZBOOT_ROM_MMCIF),y)
+ifeq ($(CONFIG_ARCH_SH7372),y)
+OBJS += mmcif-sh7372.o
+endif
+endif
+
AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
HEAD = head.o
-OBJS = misc.o decompress.o
+OBJS += misc.o decompress.o
FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c
#
@@ -29,6 +40,10 @@ ifeq ($(CONFIG_ARCH_SA1100),y)
OBJS += head-sa1100.o
endif
+ifeq ($(CONFIG_ARCH_VT8500),y)
+OBJS += head-vt8500.o
+endif
+
ifeq ($(CONFIG_CPU_XSCALE),y)
OBJS += head-xscale.o
endif
@@ -83,9 +98,11 @@ endif
EXTRA_CFLAGS := -fpic -fno-builtin
EXTRA_AFLAGS := -Wa,-march=all
+# Provide size of uncompressed kernel to the decompressor via a linker symbol.
+LDFLAGS_vmlinux = --defsym _image_size=$(shell stat -c "%s" $(obj)/../Image)
# Supply ZRELADDR to the decompressor via a linker symbol.
ifneq ($(CONFIG_AUTO_ZRELADDR),y)
-LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
+LDFLAGS_vmlinux += --defsym zreladdr=$(ZRELADDR)
endif
ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
LDFLAGS_vmlinux += --be8
diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S
index 30973b76e6a..c943d2e7da9 100644
--- a/arch/arm/boot/compressed/head-shmobile.S
+++ b/arch/arm/boot/compressed/head-shmobile.S
@@ -25,6 +25,36 @@
/* load board-specific initialization code */
#include <mach/zboot.h>
+#ifdef CONFIG_ZBOOT_ROM_MMCIF
+ /* Load image from MMC */
+ adr sp, __tmp_stack + 128
+ ldr r0, __image_start
+ ldr r1, __image_end
+ subs r1, r1, r0
+ ldr r0, __load_base
+ bl mmcif_loader
+
+ /* Jump to loaded code */
+ ldr r0, __loaded
+ ldr r1, __image_start
+ sub r0, r0, r1
+ ldr r1, __load_base
+ add pc, r0, r1
+
+__image_start:
+ .long _start
+__image_end:
+ .long _got_end
+__load_base:
+ .long CONFIG_MEMORY_START + 0x02000000 @ Load at 32Mb into SDRAM
+__loaded:
+ .long __continue
+ .align
+__tmp_stack:
+ .space 128
+__continue:
+#endif /* CONFIG_ZBOOT_ROM_MMCIF */
+
b 1f
__atags:@ tag #1
.long 12 @ tag->hdr.size = tag_size(tag_core);
diff --git a/arch/arm/boot/compressed/head-vt8500.S b/arch/arm/boot/compressed/head-vt8500.S
new file mode 100644
index 00000000000..1dc1e21a3be
--- /dev/null
+++ b/arch/arm/boot/compressed/head-vt8500.S
@@ -0,0 +1,46 @@
+/*
+ * linux/arch/arm/boot/compressed/head-vt8500.S
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * VIA VT8500 specific tweaks. This is merged into head.S by the linker.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/mach-types.h>
+
+ .section ".start", "ax"
+
+__VT8500_start:
+ @ Compare the SCC ID register against a list of known values
+ ldr r1, .SCCID
+ ldr r3, [r1]
+
+ @ VT8500 override
+ ldr r4, .VT8500SCC
+ cmp r3, r4
+ ldreq r7, .ID_BV07
+ beq .Lendvt8500
+
+ @ WM8505 override
+ ldr r4, .WM8505SCC
+ cmp r3, r4
+ ldreq r7, .ID_8505
+ beq .Lendvt8500
+
+ @ Otherwise, leave the bootloader's machine id untouched
+
+.SCCID:
+ .word 0xd8120000
+.VT8500SCC:
+ .word 0x34000102
+.WM8505SCC:
+ .word 0x34260103
+
+.ID_BV07:
+ .word MACH_TYPE_BV07
+.ID_8505:
+ .word MACH_TYPE_WM8505_7IN_NETBOOK
+
+.Lendvt8500:
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 7193884ed8b..84ac4d65631 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -21,7 +21,7 @@
#if defined(CONFIG_DEBUG_ICEDCC)
-#ifdef CONFIG_CPU_V6
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
.macro loadsp, rb, tmp
.endm
.macro writeb, ch, rb
@@ -128,14 +128,14 @@ wait: mrc p14, 0, pc, c0, c1, 0
.arm @ Always enter in ARM state
start:
.type start,#function
- THUMB( adr r12, BSYM(1f) )
- THUMB( bx r12 )
- THUMB( .rept 6 )
- ARM( .rept 8 )
+ .rept 7
mov r0, r0
.endr
+ ARM( mov r0, r0 )
+ ARM( b 1f )
+ THUMB( adr r12, BSYM(1f) )
+ THUMB( bx r12 )
- b 1f
.word 0x016f2818 @ Magic numbers to help the loader
.word start @ absolute load/run zImage address
.word _edata @ zImage end address
@@ -174,9 +174,7 @@ not_angel:
*/
.text
- adr r0, LC0
- ldmia r0, {r1, r2, r3, r5, r6, r11, ip}
- ldr sp, [r0, #28]
+
#ifdef CONFIG_AUTO_ZRELADDR
@ determine final kernel image address
mov r4, pc
@@ -185,35 +183,108 @@ not_angel:
#else
ldr r4, =zreladdr
#endif
- subs r0, r0, r1 @ calculate the delta offset
- @ if delta is zero, we are
- beq not_relocated @ running at the address we
- @ were linked at.
+ bl cache_on
+
+restart: adr r0, LC0
+ ldmia r0, {r1, r2, r3, r5, r6, r9, r11, r12}
+ ldr sp, [r0, #32]
+
+ /*
+ * We might be running at a different address. We need
+ * to fix up various pointers.
+ */
+ sub r0, r0, r1 @ calculate the delta offset
+ add r5, r5, r0 @ _start
+ add r6, r6, r0 @ _edata
+#ifndef CONFIG_ZBOOT_ROM
+ /* malloc space is above the relocated stack (64k max) */
+ add sp, sp, r0
+ add r10, sp, #0x10000
+#else
/*
- * We're running at a different address. We need to fix
- * up various pointers:
- * r5 - zImage base address (_start)
- * r6 - size of decompressed image
- * r11 - GOT start
- * ip - GOT end
+ * With ZBOOT_ROM the bss/stack is non relocatable,
+ * but someone could still run this code from RAM,
+ * in which case our reference is _edata.
*/
- add r5, r5, r0
+ mov r10, r6
+#endif
+
+/*
+ * Check to see if we will overwrite ourselves.
+ * r4 = final kernel address
+ * r5 = start of this image
+ * r9 = size of decompressed image
+ * r10 = end of this image, including bss/stack/malloc space if non XIP
+ * We basically want:
+ * r4 >= r10 -> OK
+ * r4 + image length <= r5 -> OK
+ */
+ cmp r4, r10
+ bhs wont_overwrite
+ add r10, r4, r9
+ cmp r10, r5
+ bls wont_overwrite
+
+/*
+ * Relocate ourselves past the end of the decompressed kernel.
+ * r5 = start of this image
+ * r6 = _edata
+ * r10 = end of the decompressed kernel
+ * Because we always copy ahead, we need to do it from the end and go
+ * backward in case the source and destination overlap.
+ */
+ /* Round up to next 256-byte boundary. */
+ add r10, r10, #256
+ bic r10, r10, #255
+
+ sub r9, r6, r5 @ size to copy
+ add r9, r9, #31 @ rounded up to a multiple
+ bic r9, r9, #31 @ ... of 32 bytes
+ add r6, r9, r5
+ add r9, r9, r10
+
+1: ldmdb r6!, {r0 - r3, r10 - r12, lr}
+ cmp r6, r5
+ stmdb r9!, {r0 - r3, r10 - r12, lr}
+ bhi 1b
+
+ /* Preserve offset to relocated code. */
+ sub r6, r9, r6
+
+ bl cache_clean_flush
+
+ adr r0, BSYM(restart)
+ add r0, r0, r6
+ mov pc, r0
+
+wont_overwrite:
+/*
+ * If delta is zero, we are running at the address we were linked at.
+ * r0 = delta
+ * r2 = BSS start
+ * r3 = BSS end
+ * r4 = kernel execution address
+ * r7 = architecture ID
+ * r8 = atags pointer
+ * r11 = GOT start
+ * r12 = GOT end
+ * sp = stack pointer
+ */
+ teq r0, #0
+ beq not_relocated
add r11, r11, r0
- add ip, ip, r0
+ add r12, r12, r0
#ifndef CONFIG_ZBOOT_ROM
/*
* If we're running fully PIC === CONFIG_ZBOOT_ROM = n,
* we need to fix up pointers into the BSS region.
- * r2 - BSS start
- * r3 - BSS end
- * sp - stack pointer
+ * Note that the stack pointer has already been fixed up.
*/
add r2, r2, r0
add r3, r3, r0
- add sp, sp, r0
/*
* Relocate all entries in the GOT table.
@@ -221,7 +292,7 @@ not_angel:
1: ldr r1, [r11, #0] @ relocate entries in the GOT
add r1, r1, r0 @ table. This fixes up the
str r1, [r11], #4 @ C references.
- cmp r11, ip
+ cmp r11, r12
blo 1b
#else
@@ -234,7 +305,7 @@ not_angel:
cmphs r3, r1 @ _end < entry
addlo r1, r1, r0 @ table. This fixes up the
str r1, [r11], #4 @ C references.
- cmp r11, ip
+ cmp r11, r12
blo 1b
#endif
@@ -246,76 +317,24 @@ not_relocated: mov r0, #0
cmp r2, r3
blo 1b
- /*
- * The C runtime environment should now be setup
- * sufficiently. Turn the cache on, set up some
- * pointers, and start decompressing.
- */
- bl cache_on
-
- mov r1, sp @ malloc space above stack
- add r2, sp, #0x10000 @ 64k max
-
/*
- * Check to see if we will overwrite ourselves.
- * r4 = final kernel address
- * r5 = start of this image
- * r6 = size of decompressed image
- * r2 = end of malloc space (and therefore this image)
- * We basically want:
- * r4 >= r2 -> OK
- * r4 + image length <= r5 -> OK
+ * The C runtime environment should now be setup sufficiently.
+ * Set up some pointers, and start decompressing.
+ * r4 = kernel execution address
+ * r7 = architecture ID
+ * r8 = atags pointer
*/
- cmp r4, r2
- bhs wont_overwrite
- add r0, r4, r6
- cmp r0, r5
- bls wont_overwrite
-
- mov r5, r2 @ decompress after malloc space
- mov r0, r5
+ mov r0, r4
+ mov r1, sp @ malloc space above stack
+ add r2, sp, #0x10000 @ 64k max
mov r3, r7
bl decompress_kernel
-
- add r0, r0, #127 + 128 @ alignment + stack
- bic r0, r0, #127 @ align the kernel length
-/*
- * r0 = decompressed kernel length
- * r1-r3 = unused
- * r4 = kernel execution address
- * r5 = decompressed kernel start
- * r7 = architecture ID
- * r8 = atags pointer
- * r9-r12,r14 = corrupted
- */
- add r1, r5, r0 @ end of decompressed kernel
- adr r2, reloc_start
- ldr r3, LC1
- add r3, r2, r3
-1: ldmia r2!, {r9 - r12, r14} @ copy relocation code
- stmia r1!, {r9 - r12, r14}
- ldmia r2!, {r9 - r12, r14}
- stmia r1!, {r9 - r12, r14}
- cmp r2, r3
- blo 1b
- mov sp, r1
- add sp, sp, #128 @ relocate the stack
-
bl cache_clean_flush
- ARM( add pc, r5, r0 ) @ call relocation code
- THUMB( add r12, r5, r0 )
- THUMB( mov pc, r12 ) @ call relocation code
-
-/*
- * We're not in danger of overwriting ourselves. Do this the simple way.
- *
- * r4 = kernel execution address
- * r7 = architecture ID
- */
-wont_overwrite: mov r0, r4
- mov r3, r7
- bl decompress_kernel
- b call_kernel
+ bl cache_off
+ mov r0, #0 @ must be zero
+ mov r1, r7 @ restore architecture number
+ mov r2, r8 @ restore atags pointer
+ mov pc, r4 @ call kernel
.align 2
.type LC0, #object
@@ -323,11 +342,11 @@ LC0: .word LC0 @ r1
.word __bss_start @ r2
.word _end @ r3
.word _start @ r5
- .word _image_size @ r6
+ .word _edata @ r6
+ .word _image_size @ r9
.word _got_start @ r11
.word _got_end @ ip
.word user_stack_end @ sp
-LC1: .word reloc_end - reloc_start
.size LC0, . - LC0
#ifdef CONFIG_ARCH_RPC
@@ -353,7 +372,7 @@ params: ldr r0, =0x10000100 @ params_phys for RPC
* On exit,
* r0, r1, r2, r3, r9, r10, r12 corrupted
* This routine must preserve:
- * r4, r5, r6, r7, r8
+ * r4, r7, r8
*/
.align 5
cache_on: mov r3, #8 @ cache_on function
@@ -551,43 +570,6 @@ __common_mmu_cache_on:
#endif
/*
- * All code following this line is relocatable. It is relocated by
- * the above code to the end of the decompressed kernel image and
- * executed there. During this time, we have no stacks.
- *
- * r0 = decompressed kernel length
- * r1-r3 = unused
- * r4 = kernel execution address
- * r5 = decompressed kernel start
- * r7 = architecture ID
- * r8 = atags pointer
- * r9-r12,r14 = corrupted
- */
- .align 5
-reloc_start: add r9, r5, r0
- sub r9, r9, #128 @ do not copy the stack
- debug_reloc_start
- mov r1, r4
-1:
- .rept 4
- ldmia r5!, {r0, r2, r3, r10 - r12, r14} @ relocate kernel
- stmia r1!, {r0, r2, r3, r10 - r12, r14}
- .endr
-
- cmp r5, r9
- blo 1b
- mov sp, r1
- add sp, sp, #128 @ relocate the stack
- debug_reloc_end
-
-call_kernel: bl cache_clean_flush
- bl cache_off
- mov r0, #0 @ must be zero
- mov r1, r7 @ restore architecture number
- mov r2, r8 @ restore atags pointer
- mov pc, r4 @ call kernel
-
-/*
* Here follow the relocatable cache support functions for the
* various processors. This is a generic hook for locating an
* entry and jumping to an instruction at the specified offset
@@ -791,7 +773,7 @@ proc_types:
* On exit,
* r0, r1, r2, r3, r9, r12 corrupted
* This routine must preserve:
- * r4, r6, r7
+ * r4, r7, r8
*/
.align 5
cache_off: mov r3, #12 @ cache_off function
@@ -866,7 +848,7 @@ __armv3_mmu_cache_off:
* On exit,
* r1, r2, r3, r9, r10, r11, r12 corrupted
* This routine must preserve:
- * r0, r4, r5, r6, r7
+ * r4, r6, r7, r8
*/
.align 5
cache_clean_flush:
@@ -1088,7 +1070,6 @@ memdump: mov r12, r0
#endif
.ltorg
-reloc_end:
.align
.section ".stack", "aw", %nobits
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index e653a6d3c8d..4657e877bf8 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -36,7 +36,7 @@ extern void error(char *x);
#ifdef CONFIG_DEBUG_ICEDCC
-#ifdef CONFIG_CPU_V6
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
static void icedcc_putc(int ch)
{
diff --git a/arch/arm/boot/compressed/mmcif-sh7372.c b/arch/arm/boot/compressed/mmcif-sh7372.c
new file mode 100644
index 00000000000..e6180af241f
--- /dev/null
+++ b/arch/arm/boot/compressed/mmcif-sh7372.c
@@ -0,0 +1,87 @@
+/*
+ * sh7372 MMCIF loader
+ *
+ * Copyright (C) 2010 Magnus Damm
+ * Copyright (C) 2010 Simon Horman
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/mmc/sh_mmcif.h>
+#include <mach/mmcif.h>
+
+#define MMCIF_BASE (void __iomem *)0xe6bd0000
+
+#define PORT84CR (void __iomem *)0xe6050054
+#define PORT85CR (void __iomem *)0xe6050055
+#define PORT86CR (void __iomem *)0xe6050056
+#define PORT87CR (void __iomem *)0xe6050057
+#define PORT88CR (void __iomem *)0xe6050058
+#define PORT89CR (void __iomem *)0xe6050059
+#define PORT90CR (void __iomem *)0xe605005a
+#define PORT91CR (void __iomem *)0xe605005b
+#define PORT92CR (void __iomem *)0xe605005c
+#define PORT99CR (void __iomem *)0xe6050063
+
+#define SMSTPCR3 (void __iomem *)0xe615013c
+
+/* SH7372 specific MMCIF loader
+ *
+ * loads the zImage from an MMC card starting from block 1.
+ *
+ * The image must be start with a vrl4 header and
+ * the zImage must start at offset 512 of the image. That is,
+ * at block 2 (=byte 1024) on the media
+ *
+ * Use the following line to write the vrl4 formated zImage
+ * to an MMC card
+ * # dd if=vrl4.out of=/dev/sdx bs=512 seek=1
+ */
+asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len)
+{
+ mmcif_init_progress();
+ mmcif_update_progress(MMCIF_PROGRESS_ENTER);
+
+ /* Initialise MMC
+ * registers: PORT84CR-PORT92CR
+ * (MMCD0_0-MMCD0_7,MMCCMD0 Control)
+ * value: 0x04 - select function 4
+ */
+ __raw_writeb(0x04, PORT84CR);
+ __raw_writeb(0x04, PORT85CR);
+ __raw_writeb(0x04, PORT86CR);
+ __raw_writeb(0x04, PORT87CR);
+ __raw_writeb(0x04, PORT88CR);
+ __raw_writeb(0x04, PORT89CR);
+ __raw_writeb(0x04, PORT90CR);
+ __raw_writeb(0x04, PORT91CR);
+ __raw_writeb(0x04, PORT92CR);
+
+ /* Initialise MMC
+ * registers: PORT99CR (MMCCLK0 Control)
+ * value: 0x10 | 0x04 - enable output | select function 4
+ */
+ __raw_writeb(0x14, PORT99CR);
+
+ /* Enable clock to MMC hardware block */
+ __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 12), SMSTPCR3);
+
+ mmcif_update_progress(MMCIF_PROGRESS_INIT);
+
+ /* setup MMCIF hardware */
+ sh_mmcif_boot_init(MMCIF_BASE);
+
+ mmcif_update_progress(MMCIF_PROGRESS_LOAD);
+
+ /* load kernel via MMCIF interface */
+ sh_mmcif_boot_do_read(MMCIF_BASE, 2, /* Kernel is at block 2 */
+ (len + SH_MMCIF_BBS - 1) / SH_MMCIF_BBS, buf);
+
+
+ /* Disable clock to MMC hardware block */
+ __raw_writel(__raw_readl(SMSTPCR3) & (1 << 12), SMSTPCR3);
+
+ mmcif_update_progress(MMCIF_PROGRESS_DONE);
+}
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index 366a924019a..5309909d728 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -43,9 +43,6 @@ SECTIONS
_etext = .;
- /* Assume size of decompressed image is 4x the compressed image */
- _image_size = (_etext - _text) * 4;
-
_got_start = .;
.got : { *(.got) }
_got_end = .;
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 778655f0257..ea5ee4d067f 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -6,6 +6,8 @@ config ARM_VIC
config ARM_VIC_NR
int
+ default 4 if ARCH_S5PV210
+ default 3 if ARCH_S5P6442 || ARCH_S5PC100
default 2
depends on ARM_VIC
help
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 22437721115..cb6b041c39d 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -44,6 +44,19 @@ struct gic_chip_data {
void __iomem *cpu_base;
};
+/*
+ * Supported arch specific GIC irq extension.
+ * Default make them NULL.
+ */
+struct irq_chip gic_arch_extn = {
+ .irq_ack = NULL,
+ .irq_mask = NULL,
+ .irq_unmask = NULL,
+ .irq_retrigger = NULL,
+ .irq_set_type = NULL,
+ .irq_set_wake = NULL,
+};
+
#ifndef MAX_GIC_NR
#define MAX_GIC_NR 1
#endif
@@ -74,6 +87,8 @@ static inline unsigned int gic_irq(struct irq_data *d)
static void gic_ack_irq(struct irq_data *d)
{
spin_lock(&irq_controller_lock);
+ if (gic_arch_extn.irq_ack)
+ gic_arch_extn.irq_ack(d);
writel(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI);
spin_unlock(&irq_controller_lock);
}
@@ -84,6 +99,8 @@ static void gic_mask_irq(struct irq_data *d)
spin_lock(&irq_controller_lock);
writel(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4);
+ if (gic_arch_extn.irq_mask)
+ gic_arch_extn.irq_mask(d);
spin_unlock(&irq_controller_lock);
}
@@ -92,6 +109,8 @@ static void gic_unmask_irq(struct irq_data *d)
u32 mask = 1 << (d->irq % 32);
spin_lock(&irq_controller_lock);
+ if (gic_arch_extn.irq_unmask)
+ gic_arch_extn.irq_unmask(d);
writel(mask, gic_dist_base(d) + GIC_DIST_ENABLE_SET + (gic_irq(d) / 32) * 4);
spin_unlock(&irq_controller_lock);
}
@@ -116,6 +135,9 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
spin_lock(&irq_controller_lock);
+ if (gic_arch_extn.irq_set_type)
+ gic_arch_extn.irq_set_type(d, type);
+
val = readl(base + GIC_DIST_CONFIG + confoff);
if (type == IRQ_TYPE_LEVEL_HIGH)
val &= ~confmask;
@@ -141,32 +163,54 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
return 0;
}
+static int gic_retrigger(struct irq_data *d)
+{
+ if (gic_arch_extn.irq_retrigger)
+ return gic_arch_extn.irq_retrigger(d);
+
+ return -ENXIO;
+}
+
#ifdef CONFIG_SMP
-static int
-gic_set_cpu(struct irq_data *d, const struct cpumask *mask_val, bool force)
+static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
+ bool force)
{
void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3);
unsigned int shift = (d->irq % 4) * 8;
unsigned int cpu = cpumask_first(mask_val);
- u32 val;
- struct irq_desc *desc;
+ u32 val, mask, bit;
- spin_lock(&irq_controller_lock);
- desc = irq_to_desc(d->irq);
- if (desc == NULL) {
- spin_unlock(&irq_controller_lock);
+ if (cpu >= 8)
return -EINVAL;
- }
+
+ mask = 0xff << shift;
+ bit = 1 << (cpu + shift);
+
+ spin_lock(&irq_controller_lock);
d->node = cpu;
- val = readl(reg) & ~(0xff << shift);
- val |= 1 << (cpu + shift);
- writel(val, reg);
+ val = readl(reg) & ~mask;
+ writel(val | bit, reg);
spin_unlock(&irq_controller_lock);
return 0;
}
#endif
+#ifdef CONFIG_PM
+static int gic_set_wake(struct irq_data *d, unsigned int on)
+{
+ int ret = -ENXIO;
+
+ if (gic_arch_extn.irq_set_wake)
+ ret = gic_arch_extn.irq_set_wake(d, on);
+
+ return ret;
+}
+
+#else
+#define gic_set_wake NULL
+#endif
+
static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
{
struct gic_chip_data *chip_data = get_irq_data(irq);
@@ -202,9 +246,11 @@ static struct irq_chip gic_chip = {
.irq_mask = gic_mask_irq,
.irq_unmask = gic_unmask_irq,
.irq_set_type = gic_set_type,
+ .irq_retrigger = gic_retrigger,
#ifdef CONFIG_SMP
- .irq_set_affinity = gic_set_cpu,
+ .irq_set_affinity = gic_set_affinity,
#endif
+ .irq_set_wake = gic_set_wake,
};
void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
diff --git a/arch/arm/include/asm/a.out-core.h b/arch/arm/include/asm/a.out-core.h
index 93d04acaa31..92f10cb5c70 100644
--- a/arch/arm/include/asm/a.out-core.h
+++ b/arch/arm/include/asm/a.out-core.h
@@ -32,11 +32,7 @@ static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
dump->u_dsize = (tsk->mm->brk - tsk->mm->start_data + PAGE_SIZE - 1) >> PAGE_SHIFT;
dump->u_ssize = 0;
- dump->u_debugreg[0] = tsk->thread.debug.bp[0].address;
- dump->u_debugreg[1] = tsk->thread.debug.bp[1].address;
- dump->u_debugreg[2] = tsk->thread.debug.bp[0].insn.arm;
- dump->u_debugreg[3] = tsk->thread.debug.bp[1].insn.arm;
- dump->u_debugreg[4] = tsk->thread.debug.nsaved;
+ memset(dump->u_debugreg, 0, sizeof(dump->u_debugreg));
if (dump->start_stack < 0x04000000)
dump->u_ssize = (0x04000000 - dump->start_stack) >> PAGE_SHIFT;
diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h
index 7b1bb2bbaf8..af54ed102f5 100644
--- a/arch/arm/include/asm/bitops.h
+++ b/arch/arm/include/asm/bitops.h
@@ -149,14 +149,18 @@ ____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
*/
/*
+ * Native endian assembly bitops. nr = 0 -> word 0 bit 0.
+ */
+extern void _set_bit(int nr, volatile unsigned long * p);
+extern void _clear_bit(int nr, volatile unsigned long * p);
+extern void _change_bit(int nr, volatile unsigned long * p);
+extern int _test_and_set_bit(int nr, volatile unsigned long * p);
+extern int _test_and_clear_bit(int nr, volatile unsigned long * p);
+extern int _test_and_change_bit(int nr, volatile unsigned long * p);
+
+/*
* Little endian assembly bitops. nr = 0 -> byte 0 bit 0.
*/
-extern void _set_bit_le(int nr, volatile unsigned long * p);
-extern void _clear_bit_le(int nr, volatile unsigned long * p);
-extern void _change_bit_le(int nr, volatile unsigned long * p);
-extern int _test_and_set_bit_le(int nr, volatile unsigned long * p);
-extern int _test_and_clear_bit_le(int nr, volatile unsigned long * p);
-extern int _test_and_change_bit_le(int nr, volatile unsigned long * p);
extern int _find_first_zero_bit_le(const void * p, unsigned size);
extern int _find_next_zero_bit_le(const void * p, int size, int offset);
extern int _find_first_bit_le(const unsigned long *p, unsigned size);
@@ -165,12 +169,6 @@ extern int _find_next_bit_le(const unsigned long *p, int size, int offset);
/*
* Big endian assembly bitops. nr = 0 -> byte 3 bit 0.
*/
-extern void _set_bit_be(int nr, volatile unsigned long * p);
-extern void _clear_bit_be(int nr, volatile unsigned long * p);
-extern void _change_bit_be(int nr, volatile unsigned long * p);
-extern int _test_and_set_bit_be(int nr, volatile unsigned long * p);
-extern int _test_and_clear_bit_be(int nr, volatile unsigned long * p);
-extern int _test_and_change_bit_be(int nr, volatile unsigned long * p);
extern int _find_first_zero_bit_be(const void * p, unsigned size);
extern int _find_next_zero_bit_be(const void * p, int size, int offset);
extern int _find_first_bit_be(const unsigned long *p, unsigned size);
@@ -180,33 +178,26 @@ extern int _find_next_bit_be(const unsigned long *p, int size, int offset);
/*
* The __* form of bitops are non-atomic and may be reordered.
*/
-#define ATOMIC_BITOP_LE(name,nr,p) \
- (__builtin_constant_p(nr) ? \
- ____atomic_##name(nr, p) : \
- _##name##_le(nr,p))
-
-#define ATOMIC_BITOP_BE(name,nr,p) \
- (__builtin_constant_p(nr) ? \
- ____atomic_##name(nr, p) : \
- _##name##_be(nr,p))
+#define ATOMIC_BITOP(name,nr,p) \
+ (__builtin_constant_p(nr) ? ____atomic_##name(nr, p) : _##name(nr,p))
#else
-#define ATOMIC_BITOP_LE(name,nr,p) _##name##_le(nr,p)
-#define ATOMIC_BITOP_BE(name,nr,p) _##name##_be(nr,p)
+#define ATOMIC_BITOP(name,nr,p) _##name(nr,p)
#endif
-#define NONATOMIC_BITOP(name,nr,p) \
- (____nonatomic_##name(nr, p))
+/*
+ * Native endian atomic definitions.
+ */
+#define set_bit(nr,p) ATOMIC_BITOP(set_bit,nr,p)
+#define clear_bit(nr,p) ATOMIC_BITOP(clear_bit,nr,p)
+#define change_bit(nr,p) ATOMIC_BITOP(change_bit,nr,p)
+#define test_and_set_bit(nr,p) ATOMIC_BITOP(test_and_set_bit,nr,p)
+#define test_and_clear_bit(nr,p) ATOMIC_BITOP(test_and_clear_bit,nr,p)
+#define test_and_change_bit(nr,p) ATOMIC_BITOP(test_and_change_bit,nr,p)
#ifndef __ARMEB__
/*
* These are the little endian, atomic definitions.
*/
-#define set_bit(nr,p) ATOMIC_BITOP_LE(set_bit,nr,p)
-#define clear_bit(nr,p) ATOMIC_BITOP_LE(clear_bit,nr,p)
-#define change_bit(nr,p) ATOMIC_BITOP_LE(change_bit,nr,p)
-#define test_and_set_bit(nr,p) ATOMIC_BITOP_LE(test_and_set_bit,nr,p)
-#define test_and_clear_bit(nr,p) ATOMIC_BITOP_LE(test_and_clear_bit,nr,p)
-#define test_and_change_bit(nr,p) ATOMIC_BITOP_LE(test_and_change_bit,nr,p)
#define find_first_zero_bit(p,sz) _find_first_zero_bit_le(p,sz)
#define find_next_zero_bit(p,sz,off) _find_next_zero_bit_le(p,sz,off)
#define find_first_bit(p,sz) _find_first_bit_le(p,sz)
@@ -215,16 +206,9 @@ extern int _find_next_bit_be(const unsigned long *p, int size, int offset);
#define WORD_BITOFF_TO_LE(x) ((x))
#else
-
/*
* These are the big endian, atomic definitions.
*/
-#define set_bit(nr,p) ATOMIC_BITOP_BE(set_bit,nr,p)
-#define clear_bit(nr,p) ATOMIC_BITOP_BE(clear_bit,nr,p)
-#define change_bit(nr,p) ATOMIC_BITOP_BE(change_bit,nr,p)
-#define test_and_set_bit(nr,p) ATOMIC_BITOP_BE(test_and_set_bit,nr,p)
-#define test_and_clear_bit(nr,p) ATOMIC_BITOP_BE(test_and_clear_bit,nr,p)
-#define test_and_change_bit(nr,p) ATOMIC_BITOP_BE(test_and_change_bit,nr,p)
#define find_first_zero_bit(p,sz) _find_first_zero_bit_be(p,sz)
#define find_next_zero_bit(p,sz,off) _find_next_zero_bit_be(p,sz,off)
#define find_first_bit(p,sz) _find_first_bit_be(p,sz)
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 3acd8fa25e3..d5d8d5c7268 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -12,7 +12,7 @@
#include <linux/mm.h>
-#include <asm/glue.h>
+#include <asm/glue-cache.h>
#include <asm/shmparam.h>
#include <asm/cachetype.h>
#include <asm/outercache.h>
@@ -20,123 +20,6 @@
#define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
/*
- * Cache Model
- * ===========
- */
-#undef _CACHE
-#undef MULTI_CACHE
-
-#if defined(CONFIG_CPU_CACHE_V3)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE v3
-# endif
-#endif
-
-#if defined(CONFIG_CPU_CACHE_V4)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE v4
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
- defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \
- defined(CONFIG_CPU_ARM1026)
-# define MULTI_CACHE 1
-#endif
-
-#if defined(CONFIG_CPU_FA526)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE fa
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM926T)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE arm926
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM940T)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE arm940
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM946E)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE arm946
-# endif
-#endif
-
-#if defined(CONFIG_CPU_CACHE_V4WB)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE v4wb
-# endif
-#endif
-
-#if defined(CONFIG_CPU_XSCALE)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE xscale
-# endif
-#endif
-
-#if defined(CONFIG_CPU_XSC3)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE xsc3
-# endif
-#endif
-
-#if defined(CONFIG_CPU_MOHAWK)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE mohawk
-# endif
-#endif
-
-#if defined(CONFIG_CPU_FEROCEON)
-# define MULTI_CACHE 1
-#endif
-
-#if defined(CONFIG_CPU_V6)
-//# ifdef _CACHE
-# define MULTI_CACHE 1
-//# else
-//# define _CACHE v6
-//# endif
-#endif
-
-#if defined(CONFIG_CPU_V7)
-//# ifdef _CACHE
-# define MULTI_CACHE 1
-//# else
-//# define _CACHE v7
-//# endif
-#endif
-
-#if !defined(_CACHE) && !defined(MULTI_CACHE)
-#error Unknown cache maintainence model
-#endif
-
-/*
* This flag is used to indicate that the page pointed to by a pte is clean
* and does not require cleaning before returning it to the user.
*/
@@ -249,19 +132,11 @@ extern struct cpu_cache_fns cpu_cache;
* visible to the CPU.
*/
#define dmac_map_area cpu_cache.dma_map_area
-#define dmac_unmap_area cpu_cache.dma_unmap_area
+#define dmac_unmap_area cpu_cache.dma_unmap_area
#define dmac_flush_range cpu_cache.dma_flush_range
#else
-#define __cpuc_flush_icache_all __glue(_CACHE,_flush_icache_all)
-#define __cpuc_flush_kern_all __glue(_CACHE,_flush_kern_cache_all)
-#define __cpuc_flush_user_all __glue(_CACHE,_flush_user_cache_all)
-#define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range)
-#define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range)
-#define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range)
-#define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area)
-
extern void __cpuc_flush_icache_all(void);
extern void __cpuc_flush_kern_all(void);
extern void __cpuc_flush_user_all(void);
@@ -276,10 +151,6 @@ extern void __cpuc_flush_dcache_area(void *, size_t);
* is visible to DMA, or data written by DMA to system memory is
* visible to the CPU.
*/
-#define dmac_map_area __glue(_CACHE,_dma_map_area)
-#define dmac_unmap_area __glue(_CACHE,_dma_unmap_area)
-#define dmac_flush_range __glue(_CACHE,_dma_flush_range)
-
extern void dmac_map_area(const void *, size_t, int);
extern void dmac_unmap_area(const void *, size_t, int);
extern void dmac_flush_range(const void *, const void *);
@@ -316,7 +187,8 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *,
* Optimized __flush_icache_all for the common cases. Note that UP ARMv7
* will fall through to use __flush_icache_all_generic.
*/
-#if (defined(CONFIG_CPU_V7) && defined(CONFIG_CPU_V6)) || \
+#if (defined(CONFIG_CPU_V7) && \
+ (defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K))) || \
defined(CONFIG_SMP_ON_UP)
#define __flush_icache_preferred __cpuc_flush_icache_all
#elif __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP)
diff --git a/arch/arm/include/asm/cpu-multi32.h b/arch/arm/include/asm/cpu-multi32.h
deleted file mode 100644
index e2b5b0b2116..00000000000
--- a/arch/arm/include/asm/cpu-multi32.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * arch/arm/include/asm/cpu-multi32.h
- *
- * Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/page.h>
-
-struct mm_struct;
-
-/*
- * Don't change this structure - ASM code
- * relies on it.
- */
-extern struct processor {
- /* MISC
- * get data abort address/flags
- */
- void (*_data_abort)(unsigned long pc);
- /*
- * Retrieve prefetch fault address
- */
- unsigned long (*_prefetch_abort)(unsigned long lr);
- /*
- * Set up any processor specifics
- */
- void (*_proc_init)(void);
- /*
- * Disable any processor specifics
- */
- void (*_proc_fin)(void);
- /*
- * Special stuff for a reset
- */
- void (*reset)(unsigned long addr) __attribute__((noreturn));
- /*
- * Idle the processor
- */
- int (*_do_idle)(void);
- /*
- * Processor architecture specific
- */
- /*
- * clean a virtual address range from the
- * D-cache without flushing the cache.
- */
- void (*dcache_clean_area)(void *addr, int size);
-
- /*
- * Set the page table
- */
- void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm);
- /*
- * Set a possibly extended PTE. Non-extended PTEs should
- * ignore 'ext'.
- */
- void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext);
-} processor;
-
-#define cpu_proc_init() processor._proc_init()
-#define cpu_proc_fin() processor._proc_fin()
-#define cpu_reset(addr) processor.reset(addr)
-#define cpu_do_idle() processor._do_idle()
-#define cpu_dcache_clean_area(addr,sz) processor.dcache_clean_area(addr,sz)
-#define cpu_set_pte_ext(ptep,pte,ext) processor.set_pte_ext(ptep,pte,ext)
-#define cpu_do_switch_mm(pgd,mm) processor.switch_mm(pgd,mm)
diff --git a/arch/arm/include/asm/cpu-single.h b/arch/arm/include/asm/cpu-single.h
deleted file mode 100644
index f073a6d2a40..00000000000
--- a/arch/arm/include/asm/cpu-single.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * arch/arm/include/asm/cpu-single.h
- *
- * Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/*
- * Single CPU
- */
-#ifdef __STDC__
-#define __catify_fn(name,x) name##x
-#else
-#define __catify_fn(name,x) name/**/x
-#endif
-#define __cpu_fn(name,x) __catify_fn(name,x)
-
-/*
- * If we are supporting multiple CPUs, then we must use a table of
- * function pointers for this lot. Otherwise, we can optimise the
- * table away.
- */
-#define cpu_proc_init __cpu_fn(CPU_NAME,_proc_init)
-#define cpu_proc_fin __cpu_fn(CPU_NAME,_proc_fin)
-#define cpu_reset __cpu_fn(CPU_NAME,_reset)
-#define cpu_do_idle __cpu_fn(CPU_NAME,_do_idle)
-#define cpu_dcache_clean_area __cpu_fn(CPU_NAME,_dcache_clean_area)
-#define cpu_do_switch_mm __cpu_fn(CPU_NAME,_switch_mm)
-#define cpu_set_pte_ext __cpu_fn(CPU_NAME,_set_pte_ext)
-
-#include <asm/page.h>
-
-struct mm_struct;
-
-/* declare all the functions as extern */
-extern void cpu_proc_init(void);
-extern void cpu_proc_fin(void);
-extern int cpu_do_idle(void);
-extern void cpu_dcache_clean_area(void *, int);
-extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
-extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
-extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 20ae96cc002..ed5bc9e05a4 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -23,6 +23,8 @@
#define CPUID_EXT_ISAR4 "c2, 4"
#define CPUID_EXT_ISAR5 "c2, 5"
+extern unsigned int processor_id;
+
#ifdef CONFIG_CPU_CP15
#define read_cpuid(reg) \
({ \
@@ -43,7 +45,6 @@
__val; \
})
#else
-extern unsigned int processor_id;
#define read_cpuid(reg) (processor_id)
#define read_cpuid_ext(reg) 0
#endif
diff --git a/arch/arm/include/asm/fncpy.h b/arch/arm/include/asm/fncpy.h
new file mode 100644
index 00000000000..de535474692
--- /dev/null
+++ b/arch/arm/include/asm/fncpy.h
@@ -0,0 +1,94 @@
+/*
+ * arch/arm/include/asm/fncpy.h - helper macros for function body copying
+ *
+ * Copyright (C) 2011 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * These macros are intended for use when there is a need to copy a low-level
+ * function body into special memory.
+ *
+ * For example, when reconfiguring the SDRAM controller, the code doing the
+ * reconfiguration may need to run from SRAM.
+ *
+ * NOTE: that the copied function body must be entirely self-contained and
+ * position-independent in order for this to work properly.
+ *
+ * NOTE: in order for embedded literals and data to get referenced correctly,
+ * the alignment of functions must be preserved when copying. To ensure this,
+ * the source and destination addresses for fncpy() must be aligned to a
+ * multiple of 8 bytes: you will be get a BUG() if this condition is not met.
+ * You will typically need a ".align 3" directive in the assembler where the
+ * function to be copied is defined, and ensure that your allocator for the
+ * destination buffer returns 8-byte-aligned pointers.
+ *
+ * Typical usage example:
+ *
+ * extern int f(args);
+ * extern uint32_t size_of_f;
+ * int (*copied_f)(args);
+ * void *sram_buffer;
+ *
+ * copied_f = fncpy(sram_buffer, &f, size_of_f);
+ *
+ * ... later, call the function: ...
+ *
+ * copied_f(args);
+ *
+ * The size of the function to be copied can't be determined from C:
+ * this must be determined by other means, such as adding assmbler directives
+ * in the file where f is defined.
+ */
+
+#ifndef __ASM_FNCPY_H
+#define __ASM_FNCPY_H
+
+#include <linux/types.h>
+#include <linux/string.h>
+
+#include <asm/bug.h>
+#include <asm/cacheflush.h>
+
+/*
+ * Minimum alignment requirement for the source and destination addresses
+ * for function copying.
+ */
+#define FNCPY_ALIGN 8
+
+#define fncpy(dest_buf, funcp, size) ({ \
+ uintptr_t __funcp_address; \
+ typeof(funcp) __result; \
+ \
+ asm("" : "=r" (__funcp_address) : "0" (funcp)); \
+ \
+ /* \
+ * Ensure alignment of source and destination addresses, \
+ * disregarding the function's Thumb bit: \
+ */ \
+ BUG_ON((uintptr_t)(dest_buf) & (FNCPY_ALIGN - 1) || \
+ (__funcp_address & ~(uintptr_t)1 & (FNCPY_ALIGN - 1))); \
+ \
+ memcpy(dest_buf, (void const *)(__funcp_address & ~1), size); \
+ flush_icache_range((unsigned long)(dest_buf), \
+ (unsigned long)(dest_buf) + (size)); \
+ \
+ asm("" : "=r" (__result) \
+ : "0" ((uintptr_t)(dest_buf) | (__funcp_address & 1))); \
+ \
+ __result; \
+})
+
+#endif /* !__ASM_FNCPY_H */
diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h
new file mode 100644
index 00000000000..c7afbc552c7
--- /dev/null
+++ b/arch/arm/include/asm/glue-cache.h
@@ -0,0 +1,146 @@
+/*
+ * arch/arm/include/asm/glue-cache.h
+ *
+ * Copyright (C) 1999-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASM_GLUE_CACHE_H
+#define ASM_GLUE_CACHE_H
+
+#include <asm/glue.h>
+
+/*
+ * Cache Model
+ * ===========
+ */
+#undef _CACHE
+#undef MULTI_CACHE
+
+#if defined(CONFIG_CPU_CACHE_V3)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE v3
+# endif
+#endif
+
+#if defined(CONFIG_CPU_CACHE_V4)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE v4
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
+ defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \
+ defined(CONFIG_CPU_ARM1026)
+# define MULTI_CACHE 1
+#endif
+
+#if defined(CONFIG_CPU_FA526)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE fa
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM926T)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE arm926
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM940T)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE arm940
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM946E)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE arm946
+# endif
+#endif
+
+#if defined(CONFIG_CPU_CACHE_V4WB)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE v4wb
+# endif
+#endif
+
+#if defined(CONFIG_CPU_XSCALE)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE xscale
+# endif
+#endif
+
+#if defined(CONFIG_CPU_XSC3)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE xsc3
+# endif
+#endif
+
+#if defined(CONFIG_CPU_MOHAWK)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE mohawk
+# endif
+#endif
+
+#if defined(CONFIG_CPU_FEROCEON)
+# define MULTI_CACHE 1
+#endif
+
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
+//# ifdef _CACHE
+# define MULTI_CACHE 1
+//# else
+//# define _CACHE v6
+//# endif
+#endif
+
+#if defined(CONFIG_CPU_V7)
+//# ifdef _CACHE
+# define MULTI_CACHE 1
+//# else
+//# define _CACHE v7
+//# endif
+#endif
+
+#if !defined(_CACHE) && !defined(MULTI_CACHE)
+#error Unknown cache maintainence model
+#endif
+
+#ifndef MULTI_CACHE
+#define __cpuc_flush_icache_all __glue(_CACHE,_flush_icache_all)
+#define __cpuc_flush_kern_all __glue(_CACHE,_flush_kern_cache_all)
+#define __cpuc_flush_user_all __glue(_CACHE,_flush_user_cache_all)
+#define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range)
+#define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range)
+#define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range)
+#define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area)
+
+#define dmac_map_area __glue(_CACHE,_dma_map_area)
+#define dmac_unmap_area __glue(_CACHE,_dma_unmap_area)
+#define dmac_flush_range __glue(_CACHE,_dma_flush_range)
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/glue-df.h b/arch/arm/include/asm/glue-df.h
new file mode 100644
index 00000000000..354d571e8bc
--- /dev/null
+++ b/arch/arm/include/asm/glue-df.h
@@ -0,0 +1,110 @@
+/*
+ * arch/arm/include/asm/glue-df.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ * Copyright (C) 2000-2002 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASM_GLUE_DF_H
+#define ASM_GLUE_DF_H
+
+#include <asm/glue.h>
+
+/*
+ * Data Abort Model
+ * ================
+ *
+ * We have the following to choose from:
+ * arm6 - ARM6 style
+ * arm7 - ARM7 style
+ * v4_early - ARMv4 without Thumb early abort handler
+ * v4t_late - ARMv4 with Thumb late abort handler
+ * v4t_early - ARMv4 with Thumb early abort handler
+ * v5tej_early - ARMv5 with Thumb and Java early abort handler
+ * xscale - ARMv5 with Thumb with Xscale extensions
+ * v6_early - ARMv6 generic early abort handler
+ * v7_early - ARMv7 generic early abort handler
+ */
+#undef CPU_DABORT_HANDLER
+#undef MULTI_DABORT
+
+#if defined(CONFIG_CPU_ARM610)
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER cpu_arm6_data_abort
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM710)
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER cpu_arm7_data_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_LV4T
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER v4t_late_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV4
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER v4_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV4T
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER v4t_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV5TJ
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER v5tj_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV5T
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER v5t_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV6
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER v6_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV7
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER v7_early_abort
+# endif
+#endif
+
+#ifndef CPU_DABORT_HANDLER
+#error Unknown data abort handler type
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/glue-pf.h b/arch/arm/include/asm/glue-pf.h
new file mode 100644
index 00000000000..d385f37c13f
--- /dev/null
+++ b/arch/arm/include/asm/glue-pf.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/include/asm/glue-pf.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ * Copyright (C) 2000-2002 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASM_GLUE_PF_H
+#define ASM_GLUE_PF_H
+
+#include <asm/glue.h>
+
+/*
+ * Prefetch Abort Model
+ * ================
+ *
+ * We have the following to choose from:
+ * legacy - no IFSR, no IFAR
+ * v6 - ARMv6: IFSR, no IFAR
+ * v7 - ARMv7: IFSR and IFAR
+ */
+
+#undef CPU_PABORT_HANDLER
+#undef MULTI_PABORT
+
+#ifdef CONFIG_CPU_PABRT_LEGACY
+# ifdef CPU_PABORT_HANDLER
+# define MULTI_PABORT 1
+# else
+# define CPU_PABORT_HANDLER legacy_pabort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_PABRT_V6
+# ifdef CPU_PABORT_HANDLER
+# define MULTI_PABORT 1
+# else
+# define CPU_PABORT_HANDLER v6_pabort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_PABRT_V7
+# ifdef CPU_PABORT_HANDLER
+# define MULTI_PABORT 1
+# else
+# define CPU_PABORT_HANDLER v7_pabort
+# endif
+#endif
+
+#ifndef CPU_PABORT_HANDLER
+#error Unknown prefetch abort handler type
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/glue-proc.h b/arch/arm/include/asm/glue-proc.h
new file mode 100644
index 00000000000..e2be7f14266
--- /dev/null
+++ b/arch/arm/include/asm/glue-proc.h
@@ -0,0 +1,264 @@
+/*
+ * arch/arm/include/asm/glue-proc.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASM_GLUE_PROC_H
+#define ASM_GLUE_PROC_H
+
+#include <asm/glue.h>
+
+/*
+ * Work out if we need multiple CPU support
+ */
+#undef MULTI_CPU
+#undef CPU_NAME
+
+/*
+ * CPU_NAME - the prefix for CPU related functions
+ */
+
+#ifdef CONFIG_CPU_ARM610
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm6
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM7TDMI
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm7tdmi
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM710
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm7
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM720T
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm720
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM740T
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm740
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM9TDMI
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm9tdmi
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM920T
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm920
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM922T
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm922
+# endif
+#endif
+
+#ifdef CONFIG_CPU_FA526
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_fa526
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM925T
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm925
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM926T
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm926
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM940T
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm940
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM946E
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm946
+# endif
+#endif
+
+#ifdef CONFIG_CPU_SA110
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_sa110
+# endif
+#endif
+
+#ifdef CONFIG_CPU_SA1100
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_sa1100
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM1020
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm1020
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM1020E
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm1020e
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM1022
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm1022
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM1026
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm1026
+# endif
+#endif
+
+#ifdef CONFIG_CPU_XSCALE
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_xscale
+# endif
+#endif
+
+#ifdef CONFIG_CPU_XSC3
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_xsc3
+# endif
+#endif
+
+#ifdef CONFIG_CPU_MOHAWK
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_mohawk
+# endif
+#endif
+
+#ifdef CONFIG_CPU_FEROCEON
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_feroceon
+# endif
+#endif
+
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_v6
+# endif
+#endif
+
+#ifdef CONFIG_CPU_V7
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_v7
+# endif
+#endif
+
+#ifndef MULTI_CPU
+#define cpu_proc_init __glue(CPU_NAME,_proc_init)
+#define cpu_proc_fin __glue(CPU_NAME,_proc_fin)
+#define cpu_reset __glue(CPU_NAME,_reset)
+#define cpu_do_idle __glue(CPU_NAME,_do_idle)
+#define cpu_dcache_clean_area __glue(CPU_NAME,_dcache_clean_area)
+#define cpu_do_switch_mm __glue(CPU_NAME,_switch_mm)
+#define cpu_set_pte_ext __glue(CPU_NAME,_set_pte_ext)
+#define cpu_suspend_size __glue(CPU_NAME,_suspend_size)
+#define cpu_do_suspend __glue(CPU_NAME,_do_suspend)
+#define cpu_do_resume __glue(CPU_NAME,_do_resume)
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/glue.h b/arch/arm/include/asm/glue.h
index 234a3fc1c78..0ec35d1698a 100644
--- a/arch/arm/include/asm/glue.h
+++ b/arch/arm/include/asm/glue.h
@@ -15,7 +15,6 @@
*/
#ifdef __KERNEL__
-
#ifdef __STDC__
#define ____glue(name,fn) name##fn
#else
@@ -23,141 +22,4 @@
#endif
#define __glue(name,fn) ____glue(name,fn)
-
-
-/*
- * Data Abort Model
- * ================
- *
- * We have the following to choose from:
- * arm6 - ARM6 style
- * arm7 - ARM7 style
- * v4_early - ARMv4 without Thumb early abort handler
- * v4t_late - ARMv4 with Thumb late abort handler
- * v4t_early - ARMv4 with Thumb early abort handler
- * v5tej_early - ARMv5 with Thumb and Java early abort handler
- * xscale - ARMv5 with Thumb with Xscale extensions
- * v6_early - ARMv6 generic early abort handler
- * v7_early - ARMv7 generic early abort handler
- */
-#undef CPU_DABORT_HANDLER
-#undef MULTI_DABORT
-
-#if defined(CONFIG_CPU_ARM610)
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER cpu_arm6_data_abort
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM710)
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER cpu_arm7_data_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_LV4T
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER v4t_late_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV4
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER v4_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV4T
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER v4t_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV5TJ
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER v5tj_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV5T
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER v5t_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV6
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER v6_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV7
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER v7_early_abort
-# endif
-#endif
-
-#ifndef CPU_DABORT_HANDLER
-#error Unknown data abort handler type
-#endif
-
-/*
- * Prefetch Abort Model
- * ================
- *
- * We have the following to choose from:
- * legacy - no IFSR, no IFAR
- * v6 - ARMv6: IFSR, no IFAR
- * v7 - ARMv7: IFSR and IFAR
- */
-
-#undef CPU_PABORT_HANDLER
-#undef MULTI_PABORT
-
-#ifdef CONFIG_CPU_PABRT_LEGACY
-# ifdef CPU_PABORT_HANDLER
-# define MULTI_PABORT 1
-# else
-# define CPU_PABORT_HANDLER legacy_pabort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_PABRT_V6
-# ifdef CPU_PABORT_HANDLER
-# define MULTI_PABORT 1
-# else
-# define CPU_PABORT_HANDLER v6_pabort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_PABRT_V7
-# ifdef CPU_PABORT_HANDLER
-# define MULTI_PABORT 1
-# else
-# define CPU_PABORT_HANDLER v7_pabort
-# endif
-#endif
-
-#ifndef CPU_PABORT_HANDLER
-#error Unknown prefetch abort handler type
-#endif
-
#endif
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 5aeec1e1735..16bd4803158 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -36,6 +36,7 @@
#define L2X0_RAW_INTR_STAT 0x21C
#define L2X0_INTR_CLEAR 0x220
#define L2X0_CACHE_SYNC 0x730
+#define L2X0_DUMMY_REG 0x740
#define L2X0_INV_LINE_PA 0x770
#define L2X0_INV_WAY 0x77C
#define L2X0_CLEAN_LINE_PA 0x7B0
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 84557d32100..0691f9dcc50 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -34,6 +34,7 @@
#ifndef __ASSEMBLY__
extern void __iomem *gic_cpu_base_addr;
+extern struct irq_chip gic_arch_extn;
void gic_init(unsigned int, unsigned int, void __iomem *, void __iomem *);
void gic_secondary_init(unsigned int);
diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h
index 721847dc68a..e0d1c0cfa54 100644
--- a/arch/arm/include/asm/hardware/sp810.h
+++ b/arch/arm/include/asm/hardware/sp810.h
@@ -58,6 +58,9 @@
static inline void sysctl_soft_reset(void __iomem *base)
{
+ /* switch to slow mode */
+ writel(0x2, base + SCCTRL);
+
/* writing any value to SCSYSSTAT reg will reset system */
writel(0, base + SCSYSSTAT);
}
diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h
index 7080e2c8fa6..a4edd19dd3d 100644
--- a/arch/arm/include/asm/highmem.h
+++ b/arch/arm/include/asm/highmem.h
@@ -19,11 +19,36 @@
extern pte_t *pkmap_page_table;
+extern void *kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+/*
+ * The reason for kmap_high_get() is to ensure that the currently kmap'd
+ * page usage count does not decrease to zero while we're using its
+ * existing virtual mapping in an atomic context. With a VIVT cache this
+ * is essential to do, but with a VIPT cache this is only an optimization
+ * so not to pay the price of establishing a second mapping if an existing
+ * one can be used. However, on platforms without hardware TLB maintenance
+ * broadcast, we simply cannot use ARCH_NEEDS_KMAP_HIGH_GET at all since
+ * the locking involved must also disable IRQs which is incompatible with
+ * the IPI mechanism used by global TLB operations.
+ */
#define ARCH_NEEDS_KMAP_HIGH_GET
+#if defined(CONFIG_SMP) && defined(CONFIG_CPU_TLB_V6)
+#undef ARCH_NEEDS_KMAP_HIGH_GET
+#if defined(CONFIG_HIGHMEM) && defined(CONFIG_CPU_CACHE_VIVT)
+#error "The sum of features in your kernel config cannot be supported together"
+#endif
+#endif
-extern void *kmap_high(struct page *page);
+#ifdef ARCH_NEEDS_KMAP_HIGH_GET
extern void *kmap_high_get(struct page *page);
-extern void kunmap_high(struct page *page);
+#else
+static inline void *kmap_high_get(struct page *page)
+{
+ return NULL;
+}
+#endif
/*
* The following functions are already defined by <linux/highmem.h>
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 3a0893a76a3..bf13b814c1b 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -15,10 +15,6 @@ struct meminfo;
struct sys_timer;
struct machine_desc {
- /*
- * Note! The first two elements are used
- * by assembler code in head.S, head-common.S
- */
unsigned int nr; /* architecture number */
const char *name; /* architecture name */
unsigned long boot_params; /* tagged list */
diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h
index 22ac140edd9..febe495d0c6 100644
--- a/arch/arm/include/asm/mach/irq.h
+++ b/arch/arm/include/asm/mach/irq.h
@@ -34,4 +34,35 @@ do { \
raw_spin_unlock(&desc->lock); \
} while(0)
+#ifndef __ASSEMBLY__
+/*
+ * Entry/exit functions for chained handlers where the primary IRQ chip
+ * may implement either fasteoi or level-trigger flow control.
+ */
+static inline void chained_irq_enter(struct irq_chip *chip,
+ struct irq_desc *desc)
+{
+ /* FastEOI controllers require no action on entry. */
+ if (chip->irq_eoi)
+ return;
+
+ if (chip->irq_mask_ack) {
+ chip->irq_mask_ack(&desc->irq_data);
+ } else {
+ chip->irq_mask(&desc->irq_data);
+ if (chip->irq_ack)
+ chip->irq_ack(&desc->irq_data);
+ }
+}
+
+static inline void chained_irq_exit(struct irq_chip *chip,
+ struct irq_desc *desc)
+{
+ if (chip->irq_eoi)
+ chip->irq_eoi(&desc->irq_data);
+ else
+ chip->irq_unmask(&desc->irq_data);
+}
+#endif
+
#endif
diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h
index fc190092527..348d513afa9 100644
--- a/arch/arm/include/asm/outercache.h
+++ b/arch/arm/include/asm/outercache.h
@@ -31,6 +31,7 @@ struct outer_cache_fns {
#ifdef CONFIG_OUTER_CACHE_SYNC
void (*sync)(void);
#endif
+ void (*set_debug)(unsigned long);
};
#ifdef CONFIG_OUTER_CACHE
diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h
index 9763be04f77..22de005f159 100644
--- a/arch/arm/include/asm/pgalloc.h
+++ b/arch/arm/include/asm/pgalloc.h
@@ -10,6 +10,8 @@
#ifndef _ASMARM_PGALLOC_H
#define _ASMARM_PGALLOC_H
+#include <linux/pagemap.h>
+
#include <asm/domain.h>
#include <asm/pgtable-hwdef.h>
#include <asm/processor.h>
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index 8fdae9bc9ab..8ec535e11fd 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -13,250 +13,86 @@
#ifdef __KERNEL__
+#include <asm/glue-proc.h>
+#include <asm/page.h>
-/*
- * Work out if we need multiple CPU support
- */
-#undef MULTI_CPU
-#undef CPU_NAME
+#ifndef __ASSEMBLY__
+
+struct mm_struct;
/*
- * CPU_NAME - the prefix for CPU related functions
+ * Don't change this structure - ASM code relies on it.
*/
-
-#ifdef CONFIG_CPU_ARM610
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm6
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM7TDMI
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm7tdmi
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM710
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm7
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM720T
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm720
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM740T
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm740
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM9TDMI
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm9tdmi
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM920T
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm920
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM922T
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm922
-# endif
-#endif
-
-#ifdef CONFIG_CPU_FA526
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_fa526
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM925T
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm925
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM926T
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm926
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM940T
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm940
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM946E
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm946
-# endif
-#endif
-
-#ifdef CONFIG_CPU_SA110
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_sa110
-# endif
-#endif
-
-#ifdef CONFIG_CPU_SA1100
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_sa1100
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM1020
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm1020
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM1020E
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm1020e
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM1022
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm1022
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM1026
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm1026
-# endif
-#endif
-
-#ifdef CONFIG_CPU_XSCALE
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_xscale
-# endif
-#endif
-
-#ifdef CONFIG_CPU_XSC3
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_xsc3
-# endif
-#endif
-
-#ifdef CONFIG_CPU_MOHAWK
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_mohawk
-# endif
-#endif
-
-#ifdef CONFIG_CPU_FEROCEON
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_feroceon
-# endif
-#endif
-
-#ifdef CONFIG_CPU_V6
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_v6
-# endif
-#endif
-
-#ifdef CONFIG_CPU_V7
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_v7
-# endif
-#endif
-
-#ifndef __ASSEMBLY__
+extern struct processor {
+ /* MISC
+ * get data abort address/flags
+ */
+ void (*_data_abort)(unsigned long pc);
+ /*
+ * Retrieve prefetch fault address
+ */
+ unsigned long (*_prefetch_abort)(unsigned long lr);
+ /*
+ * Set up any processor specifics
+ */
+ void (*_proc_init)(void);
+ /*
+ * Disable any processor specifics
+ */
+ void (*_proc_fin)(void);
+ /*
+ * Special stuff for a reset
+ */
+ void (*reset)(unsigned long addr) __attribute__((noreturn));
+ /*
+ * Idle the processor
+ */
+ int (*_do_idle)(void);
+ /*
+ * Processor architecture specific
+ */
+ /*
+ * clean a virtual address range from the
+ * D-cache without flushing the cache.
+ */
+ void (*dcache_clean_area)(void *addr, int size);
+
+ /*
+ * Set the page table
+ */
+ void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm);
+ /*
+ * Set a possibly extended PTE. Non-extended PTEs should
+ * ignore 'ext'.
+ */
+ void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext);
+
+ /* Suspend/resume */
+ unsigned int suspend_size;
+ void (*do_suspend)(void *);
+ void (*do_resume)(void *);
+} processor;
#ifndef MULTI_CPU
-#include <asm/cpu-single.h>
+extern void cpu_proc_init(void);
+extern void cpu_proc_fin(void);
+extern int cpu_do_idle(void);
+extern void cpu_dcache_clean_area(void *, int);
+extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
+extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
#else
-#include <asm/cpu-multi32.h>
+#define cpu_proc_init() processor._proc_init()
+#define cpu_proc_fin() processor._proc_fin()
+#define cpu_reset(addr) processor.reset(addr)
+#define cpu_do_idle() processor._do_idle()
+#define cpu_dcache_clean_area(addr,sz) processor.dcache_clean_area(addr,sz)
+#define cpu_set_pte_ext(ptep,pte,ext) processor.set_pte_ext(ptep,pte,ext)
+#define cpu_do_switch_mm(pgd,mm) processor.switch_mm(pgd,mm)
#endif
+extern void cpu_resume(void);
+
#include <asm/memory.h>
#ifdef CONFIG_MMU
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 67357baaeee..b2d9df5667a 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -29,19 +29,7 @@
#define STACK_TOP_MAX TASK_SIZE
#endif
-union debug_insn {
- u32 arm;
- u16 thumb;
-};
-
-struct debug_entry {
- u32 address;
- union debug_insn insn;
-};
-
struct debug_info {
- int nsaved;
- struct debug_entry bp[2];
#ifdef CONFIG_HAVE_HW_BREAKPOINT
struct perf_event *hbp[ARM_MAX_HBP_SLOTS];
#endif
@@ -95,7 +83,7 @@ extern void release_thread(struct task_struct *);
unsigned long get_wchan(struct task_struct *p);
-#if __LINUX_ARM_ARCH__ == 6
+#if __LINUX_ARM_ARCH__ == 6 || defined(CONFIG_ARM_ERRATA_754327)
#define cpu_relax() smp_mb()
#else
#define cpu_relax() barrier()
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 783d50f3261..a8ff22b2a39 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -130,8 +130,6 @@ struct pt_regs {
#ifdef __KERNEL__
-#define arch_has_single_step() (1)
-
#define user_mode(regs) \
(((regs)->ARM_cpsr & 0xf) == 0)
diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h
index 2376835015d..4eb6d005ffa 100644
--- a/arch/arm/include/asm/smp_scu.h
+++ b/arch/arm/include/asm/smp_scu.h
@@ -1,7 +1,14 @@
#ifndef __ASMARM_ARCH_SCU_H
#define __ASMARM_ARCH_SCU_H
+#define SCU_PM_NORMAL 0
+#define SCU_PM_DORMANT 2
+#define SCU_PM_POWEROFF 3
+
+#ifndef __ASSEMBLER__
unsigned int scu_get_core_count(void __iomem *);
void scu_enable(void __iomem *);
+int scu_power_mode(void __iomem *, unsigned int);
+#endif
#endif
diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h
index 17eb355707d..fdd3820edff 100644
--- a/arch/arm/include/asm/spinlock.h
+++ b/arch/arm/include/asm/spinlock.h
@@ -5,17 +5,52 @@
#error SMP not supported on pre-ARMv6 CPUs
#endif
+/*
+ * sev and wfe are ARMv6K extensions. Uniprocessor ARMv6 may not have the K
+ * extensions, so when running on UP, we have to patch these instructions away.
+ */
+#define ALT_SMP(smp, up) \
+ "9998: " smp "\n" \
+ " .pushsection \".alt.smp.init\", \"a\"\n" \
+ " .long 9998b\n" \
+ " " up "\n" \
+ " .popsection\n"
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define SEV ALT_SMP("sev.w", "nop.w")
+/*
+ * For Thumb-2, special care is needed to ensure that the conditional WFE
+ * instruction really does assemble to exactly 4 bytes (as required by
+ * the SMP_ON_UP fixup code). By itself "wfene" might cause the
+ * assembler to insert a extra (16-bit) IT instruction, depending on the
+ * presence or absence of neighbouring conditional instructions.
+ *
+ * To avoid this unpredictableness, an approprite IT is inserted explicitly:
+ * the assembler won't change IT instructions which are explicitly present
+ * in the input.
+ */
+#define WFE(cond) ALT_SMP( \
+ "it " cond "\n\t" \
+ "wfe" cond ".n", \
+ \
+ "nop.w" \
+)
+#else
+#define SEV ALT_SMP("sev", "nop")
+#define WFE(cond) ALT_SMP("wfe" cond, "nop")
+#endif
+
static inline void dsb_sev(void)
{
#if __LINUX_ARM_ARCH__ >= 7
__asm__ __volatile__ (
"dsb\n"
- "sev"
+ SEV
);
-#elif defined(CONFIG_CPU_32v6K)
+#else
__asm__ __volatile__ (
"mcr p15, 0, %0, c7, c10, 4\n"
- "sev"
+ SEV
: : "r" (0)
);
#endif
@@ -46,9 +81,7 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
__asm__ __volatile__(
"1: ldrex %0, [%1]\n"
" teq %0, #0\n"
-#ifdef CONFIG_CPU_32v6K
-" wfene\n"
-#endif
+ WFE("ne")
" strexeq %0, %2, [%1]\n"
" teqeq %0, #0\n"
" bne 1b"
@@ -107,9 +140,7 @@ static inline void arch_write_lock(arch_rwlock_t *rw)
__asm__ __volatile__(
"1: ldrex %0, [%1]\n"
" teq %0, #0\n"
-#ifdef CONFIG_CPU_32v6K
-" wfene\n"
-#endif
+ WFE("ne")
" strexeq %0, %2, [%1]\n"
" teq %0, #0\n"
" bne 1b"
@@ -176,9 +207,7 @@ static inline void arch_read_lock(arch_rwlock_t *rw)
"1: ldrex %0, [%2]\n"
" adds %0, %0, #1\n"
" strexpl %1, %0, [%2]\n"
-#ifdef CONFIG_CPU_32v6K
-" wfemi\n"
-#endif
+ WFE("mi")
" rsbpls %0, %1, #0\n"
" bmi 1b"
: "=&r" (tmp), "=&r" (tmp2)
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 97f6d60297d..9a87823642d 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -347,6 +347,7 @@ void cpu_idle_wait(void);
#include <asm-generic/cmpxchg-local.h>
#if __LINUX_ARM_ARCH__ < 6
+/* min ARCH < ARMv6 */
#ifdef CONFIG_SMP
#error "SMP is not supported on this platform"
@@ -365,7 +366,7 @@ void cpu_idle_wait(void);
#include <asm-generic/cmpxchg.h>
#endif
-#else /* __LINUX_ARM_ARCH__ >= 6 */
+#else /* min ARCH >= ARMv6 */
extern void __bad_cmpxchg(volatile void *ptr, int size);
@@ -379,7 +380,7 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
unsigned long oldval, res;
switch (size) {
-#ifdef CONFIG_CPU_32v6K
+#ifndef CONFIG_CPU_V6 /* min ARCH >= ARMv6K */
case 1:
do {
asm volatile("@ __cmpxchg1\n"
@@ -404,7 +405,7 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
: "memory", "cc");
} while (res);
break;
-#endif /* CONFIG_CPU_32v6K */
+#endif
case 4:
do {
asm volatile("@ __cmpxchg4\n"
@@ -450,12 +451,12 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr,
unsigned long ret;
switch (size) {
-#ifndef CONFIG_CPU_32v6K
+#ifdef CONFIG_CPU_V6 /* min ARCH == ARMv6 */
case 1:
case 2:
ret = __cmpxchg_local_generic(ptr, old, new, size);
break;
-#endif /* !CONFIG_CPU_32v6K */
+#endif
default:
ret = __cmpxchg(ptr, old, new, size);
}
@@ -469,7 +470,7 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr,
(unsigned long)(n), \
sizeof(*(ptr))))
-#ifdef CONFIG_CPU_32v6K
+#ifndef CONFIG_CPU_V6 /* min ARCH >= ARMv6K */
/*
* Note : ARMv7-M (currently unsupported by Linux) does not support
@@ -524,11 +525,11 @@ static inline unsigned long long __cmpxchg64_mb(volatile void *ptr,
(unsigned long long)(o), \
(unsigned long long)(n)))
-#else /* !CONFIG_CPU_32v6K */
+#else /* min ARCH = ARMv6 */
#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-#endif /* CONFIG_CPU_32v6K */
+#endif
#endif /* __LINUX_ARM_ARCH__ >= 6 */
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index f41a6f57cd1..82dfe5d0c41 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -18,16 +18,34 @@
#define __ASMARM_TLB_H
#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
#ifndef CONFIG_MMU
#include <linux/pagemap.h>
+
+#define tlb_flush(tlb) ((void) tlb)
+
#include <asm-generic/tlb.h>
#else /* !CONFIG_MMU */
+#include <linux/swap.h>
#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+
+/*
+ * We need to delay page freeing for SMP as other CPUs can access pages
+ * which have been removed but not yet had their TLB entries invalidated.
+ * Also, as ARMv7 speculative prefetch can drag new entries into the TLB,
+ * we need to apply this same delaying tactic to ensure correct operation.
+ */
+#if defined(CONFIG_SMP) || defined(CONFIG_CPU_32v7)
+#define tlb_fast_mode(tlb) 0
+#define FREE_PTE_NR 500
+#else
+#define tlb_fast_mode(tlb) 1
+#define FREE_PTE_NR 0
+#endif
/*
* TLB handling. This allows us to remove pages from the page
@@ -36,12 +54,58 @@
struct mmu_gather {
struct mm_struct *mm;
unsigned int fullmm;
+ struct vm_area_struct *vma;
unsigned long range_start;
unsigned long range_end;
+ unsigned int nr;
+ struct page *pages[FREE_PTE_NR];
};
DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
+/*
+ * This is unnecessarily complex. There's three ways the TLB shootdown
+ * code is used:
+ * 1. Unmapping a range of vmas. See zap_page_range(), unmap_region().
+ * tlb->fullmm = 0, and tlb_start_vma/tlb_end_vma will be called.
+ * tlb->vma will be non-NULL.
+ * 2. Unmapping all vmas. See exit_mmap().
+ * tlb->fullmm = 1, and tlb_start_vma/tlb_end_vma will be called.
+ * tlb->vma will be non-NULL. Additionally, page tables will be freed.
+ * 3. Unmapping argument pages. See shift_arg_pages().
+ * tlb->fullmm = 0, but tlb_start_vma/tlb_end_vma will not be called.
+ * tlb->vma will be NULL.
+ */
+static inline void tlb_flush(struct mmu_gather *tlb)
+{
+ if (tlb->fullmm || !tlb->vma)
+ flush_tlb_mm(tlb->mm);
+ else if (tlb->range_end > 0) {
+ flush_tlb_range(tlb->vma, tlb->range_start, tlb->range_end);
+ tlb->range_start = TASK_SIZE;
+ tlb->range_end = 0;
+ }
+}
+
+static inline void tlb_add_flush(struct mmu_gather *tlb, unsigned long addr)
+{
+ if (!tlb->fullmm) {
+ if (addr < tlb->range_start)
+ tlb->range_start = addr;
+ if (addr + PAGE_SIZE > tlb->range_end)
+ tlb->range_end = addr + PAGE_SIZE;
+ }
+}
+
+static inline void tlb_flush_mmu(struct mmu_gather *tlb)
+{
+ tlb_flush(tlb);
+ if (!tlb_fast_mode(tlb)) {
+ free_pages_and_swap_cache(tlb->pages, tlb->nr);
+ tlb->nr = 0;
+ }
+}
+
static inline struct mmu_gather *
tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
{
@@ -49,6 +113,8 @@ tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
tlb->mm = mm;
tlb->fullmm = full_mm_flush;
+ tlb->vma = NULL;
+ tlb->nr = 0;
return tlb;
}
@@ -56,8 +122,7 @@ tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
static inline void
tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
{
- if (tlb->fullmm)
- flush_tlb_mm(tlb->mm);
+ tlb_flush_mmu(tlb);
/* keep the page table cache within bounds */
check_pgt_cache();
@@ -71,12 +136,7 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
static inline void
tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr)
{
- if (!tlb->fullmm) {
- if (addr < tlb->range_start)
- tlb->range_start = addr;
- if (addr + PAGE_SIZE > tlb->range_end)
- tlb->range_end = addr + PAGE_SIZE;
- }
+ tlb_add_flush(tlb, addr);
}
/*
@@ -89,6 +149,7 @@ tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
{
if (!tlb->fullmm) {
flush_cache_range(vma, vma->vm_start, vma->vm_end);
+ tlb->vma = vma;
tlb->range_start = TASK_SIZE;
tlb->range_end = 0;
}
@@ -97,12 +158,30 @@ tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
static inline void
tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
{
- if (!tlb->fullmm && tlb->range_end > 0)
- flush_tlb_range(vma, tlb->range_start, tlb->range_end);
+ if (!tlb->fullmm)
+ tlb_flush(tlb);
+}
+
+static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
+{
+ if (tlb_fast_mode(tlb)) {
+ free_page_and_swap_cache(page);
+ } else {
+ tlb->pages[tlb->nr++] = page;
+ if (tlb->nr >= FREE_PTE_NR)
+ tlb_flush_mmu(tlb);
+ }
+}
+
+static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
+ unsigned long addr)
+{
+ pgtable_page_dtor(pte);
+ tlb_add_flush(tlb, addr);
+ tlb_remove_page(tlb, pte);
}
-#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep, addr) pte_free((tlb)->mm, ptep)
+#define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr)
#define pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, pmdp)
#define tlb_migrate_finish(mm) do { } while (0)
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index ce7378ea15a..d2005de383b 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -10,12 +10,7 @@
#ifndef _ASMARM_TLBFLUSH_H
#define _ASMARM_TLBFLUSH_H
-
-#ifndef CONFIG_MMU
-
-#define tlb_flush(tlb) ((void) tlb)
-
-#else /* CONFIG_MMU */
+#ifdef CONFIG_MMU
#include <asm/glue.h>
diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h
index e71d6ff8d10..60843eb0f61 100644
--- a/arch/arm/include/asm/tls.h
+++ b/arch/arm/include/asm/tls.h
@@ -28,15 +28,14 @@
#define tls_emu 1
#define has_tls_reg 1
#define set_tls set_tls_none
-#elif __LINUX_ARM_ARCH__ >= 7 || \
- (__LINUX_ARM_ARCH__ == 6 && defined(CONFIG_CPU_32v6K))
-#define tls_emu 0
-#define has_tls_reg 1
-#define set_tls set_tls_v6k
-#elif __LINUX_ARM_ARCH__ == 6
+#elif defined(CONFIG_CPU_V6)
#define tls_emu 0
#define has_tls_reg (elf_hwcap & HWCAP_TLS)
#define set_tls set_tls_v6
+#elif defined(CONFIG_CPU_32v6K)
+#define tls_emu 0
+#define has_tls_reg 1
+#define set_tls set_tls_v6k
#else
#define tls_emu 0
#define has_tls_reg 0
diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h
index 1b960d5ef6a..f90756dc16d 100644
--- a/arch/arm/include/asm/traps.h
+++ b/arch/arm/include/asm/traps.h
@@ -45,6 +45,7 @@ static inline int in_exception_text(unsigned long ptr)
extern void __init early_trap_init(void);
extern void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame);
+extern void ptrace_break(struct task_struct *tsk, struct pt_regs *regs);
extern void *vectors_page;
diff --git a/arch/arm/include/asm/user.h b/arch/arm/include/asm/user.h
index 05ac4b06876..35917b3a97f 100644
--- a/arch/arm/include/asm/user.h
+++ b/arch/arm/include/asm/user.h
@@ -71,7 +71,7 @@ struct user{
/* the registers. */
unsigned long magic; /* To uniquely identify a core file */
char u_comm[32]; /* User command that was responsible */
- int u_debugreg[8];
+ int u_debugreg[8]; /* No longer used */
struct user_fp u_fp; /* FP state */
struct user_fp_struct * u_fp0;/* Used by gdb to help find the values for */
/* the FP registers. */
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 185ee822c93..74554f1742d 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_MODULES) += armksyms.o module.o
obj-$(CONFIG_ARTHUR) += arthur.o
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
+obj-$(CONFIG_PM) += sleep.o
obj-$(CONFIG_HAVE_SCHED_CLOCK) += sched_clock.o
obj-$(CONFIG_SMP) += smp.o smp_tlb.o
obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 9615423c37d..acca35aebe2 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -140,24 +140,18 @@ EXPORT_SYMBOL(__aeabi_ulcmp);
#endif
/* bitops */
-EXPORT_SYMBOL(_set_bit_le);
-EXPORT_SYMBOL(_test_and_set_bit_le);
-EXPORT_SYMBOL(_clear_bit_le);
-EXPORT_SYMBOL(_test_and_clear_bit_le);
-EXPORT_SYMBOL(_change_bit_le);
-EXPORT_SYMBOL(_test_and_change_bit_le);
+EXPORT_SYMBOL(_set_bit);
+EXPORT_SYMBOL(_test_and_set_bit);
+EXPORT_SYMBOL(_clear_bit);
+EXPORT_SYMBOL(_test_and_clear_bit);
+EXPORT_SYMBOL(_change_bit);
+EXPORT_SYMBOL(_test_and_change_bit);
EXPORT_SYMBOL(_find_first_zero_bit_le);
EXPORT_SYMBOL(_find_next_zero_bit_le);
EXPORT_SYMBOL(_find_first_bit_le);
EXPORT_SYMBOL(_find_next_bit_le);
#ifdef __ARMEB__
-EXPORT_SYMBOL(_set_bit_be);
-EXPORT_SYMBOL(_test_and_set_bit_be);
-EXPORT_SYMBOL(_clear_bit_be);
-EXPORT_SYMBOL(_test_and_clear_bit_be);
-EXPORT_SYMBOL(_change_bit_be);
-EXPORT_SYMBOL(_test_and_change_bit_be);
EXPORT_SYMBOL(_find_first_zero_bit_be);
EXPORT_SYMBOL(_find_next_zero_bit_be);
EXPORT_SYMBOL(_find_first_bit_be);
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 82da6617213..927522cfc12 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -13,6 +13,9 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
+#include <asm/cacheflush.h>
+#include <asm/glue-df.h>
+#include <asm/glue-pf.h>
#include <asm/mach/arch.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
@@ -114,6 +117,14 @@ int main(void)
#ifdef MULTI_PABORT
DEFINE(PROCESSOR_PABT_FUNC, offsetof(struct processor, _prefetch_abort));
#endif
+#ifdef MULTI_CPU
+ DEFINE(CPU_SLEEP_SIZE, offsetof(struct processor, suspend_size));
+ DEFINE(CPU_DO_SUSPEND, offsetof(struct processor, do_suspend));
+ DEFINE(CPU_DO_RESUME, offsetof(struct processor, do_resume));
+#endif
+#ifdef MULTI_CACHE
+ DEFINE(CACHE_FLUSH_KERN_ALL, offsetof(struct cpu_cache_fns, flush_kern_all));
+#endif
BLANK();
DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL);
DEFINE(DMA_TO_DEVICE, DMA_TO_DEVICE);
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index c6273a3bfc2..d86fcd44b22 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -583,6 +583,11 @@ void __init pci_common_init(struct hw_pci *hw)
* Assign resources.
*/
pci_bus_assign_resources(bus);
+
+ /*
+ * Enable bridges
+ */
+ pci_enable_bridges(bus);
}
/*
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index a0f07521ca8..d2d983be096 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -25,7 +25,7 @@
.macro addruart, rp, rv
.endm
-#if defined(CONFIG_CPU_V6)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
.macro senduart, rd, rx
mcr p14, 0, \rd, c0, c5, 0
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 2b46fea36c9..e8d88567680 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -16,7 +16,8 @@
*/
#include <asm/memory.h>
-#include <asm/glue.h>
+#include <asm/glue-df.h>
+#include <asm/glue-pf.h>
#include <asm/vfpmacros.h>
#include <mach/entry-macro.S>
#include <asm/thread_notify.h>
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index ae946490016..051166c2a93 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -76,13 +76,13 @@
#ifndef CONFIG_THUMB2_KERNEL
.macro svc_exit, rpsr
msr spsr_cxsf, \rpsr
-#if defined(CONFIG_CPU_32v6K)
- clrex @ clear the exclusive monitor
- ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
-#elif defined (CONFIG_CPU_V6)
+#if defined(CONFIG_CPU_V6)
ldr r0, [sp]
strex r1, r2, [sp] @ clear the exclusive monitor
ldmib sp, {r1 - pc}^ @ load r1 - pc, cpsr
+#elif defined(CONFIG_CPU_32v6K)
+ clrex @ clear the exclusive monitor
+ ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
#else
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
#endif
@@ -92,10 +92,10 @@
ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
ldr lr, [sp, #\offset + S_PC]! @ get pc
msr spsr_cxsf, r1 @ save in spsr_svc
-#if defined(CONFIG_CPU_32v6K)
- clrex @ clear the exclusive monitor
-#elif defined (CONFIG_CPU_V6)
+#if defined(CONFIG_CPU_V6)
strex r1, r2, [sp] @ clear the exclusive monitor
+#elif defined(CONFIG_CPU_32v6K)
+ clrex @ clear the exclusive monitor
#endif
.if \fast
ldmdb sp, {r1 - lr}^ @ get calling r1 - lr
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 6a87261e1b1..c9173cfbbc7 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -395,6 +395,7 @@ ENDPROC(__turn_mmu_on)
#ifdef CONFIG_SMP_ON_UP
+ __INIT
__fixup_smp:
and r3, r9, #0x000f0000 @ architecture version
teq r3, #0x000f0000 @ CPU ID supported?
@@ -419,18 +420,7 @@ __fixup_smp_on_up:
sub r3, r0, r3
add r4, r4, r3
add r5, r5, r3
-2: cmp r4, r5
- movhs pc, lr
- ldmia r4!, {r0, r6}
- ARM( str r6, [r0, r3] )
- THUMB( add r0, r0, r3 )
-#ifdef __ARMEB__
- THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian.
-#endif
- THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords
- THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r3.
- THUMB( strh r6, [r0] )
- b 2b
+ b __do_fixup_smp_on_up
ENDPROC(__fixup_smp)
.align
@@ -444,8 +434,32 @@ smp_on_up:
ALT_SMP(.long 1)
ALT_UP(.long 0)
.popsection
+#endif
+ .text
+__do_fixup_smp_on_up:
+ cmp r4, r5
+ movhs pc, lr
+ ldmia r4!, {r0, r6}
+ ARM( str r6, [r0, r3] )
+ THUMB( add r0, r0, r3 )
+#ifdef __ARMEB__
+ THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian.
#endif
+ THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords
+ THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r3.
+ THUMB( strh r6, [r0] )
+ b __do_fixup_smp_on_up
+ENDPROC(__do_fixup_smp_on_up)
+
+ENTRY(fixup_smp)
+ stmfd sp!, {r4 - r6, lr}
+ mov r4, r0
+ add r5, r0, r1
+ mov r3, #0
+ bl __do_fixup_smp_on_up
+ ldmfd sp!, {r4 - r6, pc}
+ENDPROC(fixup_smp)
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index c9f3f046757..44b84fe6e1b 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -137,11 +137,10 @@ static u8 get_debug_arch(void)
u32 didr;
/* Do we implement the extended CPUID interface? */
- if (((read_cpuid_id() >> 16) & 0xf) != 0xf) {
- pr_warning("CPUID feature registers not supported. "
- "Assuming v6 debug is present.\n");
+ if (WARN_ONCE((((read_cpuid_id() >> 16) & 0xf) != 0xf),
+ "CPUID feature registers not supported. "
+ "Assuming v6 debug is present.\n"))
return ARM_DEBUG_ARCH_V6;
- }
ARM_DBG_READ(c0, 0, didr);
return (didr >> 16) & 0xf;
@@ -152,6 +151,12 @@ u8 arch_get_debug_arch(void)
return debug_arch;
}
+static int debug_arch_supported(void)
+{
+ u8 arch = get_debug_arch();
+ return arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14;
+}
+
/* Determine number of BRP register available. */
static int get_num_brp_resources(void)
{
@@ -268,6 +273,9 @@ out:
int hw_breakpoint_slots(int type)
{
+ if (!debug_arch_supported())
+ return 0;
+
/*
* We can be called early, so don't rely on
* our static variables being initialised.
@@ -828,20 +836,33 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
/*
* One-time initialisation.
*/
-static void reset_ctrl_regs(void *unused)
+static void reset_ctrl_regs(void *info)
{
- int i;
+ int i, cpu = smp_processor_id();
+ u32 dbg_power;
+ cpumask_t *cpumask = info;
/*
* v7 debug contains save and restore registers so that debug state
- * can be maintained across low-power modes without leaving
- * the debug logic powered up. It is IMPLEMENTATION DEFINED whether
- * we can write to the debug registers out of reset, so we must
- * unlock the OS Lock Access Register to avoid taking undefined
- * instruction exceptions later on.
+ * can be maintained across low-power modes without leaving the debug
+ * logic powered up. It is IMPLEMENTATION DEFINED whether we can access
+ * the debug registers out of reset, so we must unlock the OS Lock
+ * Access Register to avoid taking undefined instruction exceptions
+ * later on.
*/
if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) {
/*
+ * Ensure sticky power-down is clear (i.e. debug logic is
+ * powered up).
+ */
+ asm volatile("mrc p14, 0, %0, c1, c5, 4" : "=r" (dbg_power));
+ if ((dbg_power & 0x1) == 0) {
+ pr_warning("CPU %d debug is powered down!\n", cpu);
+ cpumask_or(cpumask, cpumask, cpumask_of(cpu));
+ return;
+ }
+
+ /*
* Unconditionally clear the lock by writing a value
* other than 0xC5ACCE55 to the access register.
*/
@@ -879,10 +900,11 @@ static struct notifier_block __cpuinitdata dbg_reset_nb = {
static int __init arch_hw_breakpoint_init(void)
{
u32 dscr;
+ cpumask_t cpumask = { CPU_BITS_NONE };
debug_arch = get_debug_arch();
- if (debug_arch > ARM_DEBUG_ARCH_V7_ECP14) {
+ if (!debug_arch_supported()) {
pr_info("debug architecture 0x%x unsupported.\n", debug_arch);
return 0;
}
@@ -899,18 +921,24 @@ static int __init arch_hw_breakpoint_init(void)
pr_info("%d breakpoint(s) reserved for watchpoint "
"single-step.\n", core_num_reserved_brps);
+ /*
+ * Reset the breakpoint resources. We assume that a halting
+ * debugger will leave the world in a nice state for us.
+ */
+ on_each_cpu(reset_ctrl_regs, &cpumask, 1);
+ if (!cpumask_empty(&cpumask)) {
+ core_num_brps = 0;
+ core_num_reserved_brps = 0;
+ core_num_wrps = 0;
+ return 0;
+ }
+
ARM_DBG_READ(c1, 0, dscr);
if (dscr & ARM_DSCR_HDBGEN) {
+ max_watchpoint_len = 4;
pr_warning("halting debug mode enabled. Assuming maximum "
- "watchpoint size of 4 bytes.");
+ "watchpoint size of %u bytes.", max_watchpoint_len);
} else {
- /*
- * Reset the breakpoint resources. We assume that a halting
- * debugger will leave the world in a nice state for us.
- */
- smp_call_function(reset_ctrl_regs, NULL, 1);
- reset_ctrl_regs(NULL);
-
/* Work out the maximum supported watchpoint length. */
max_watchpoint_len = get_max_wp_len();
pr_info("maximum watchpoint size is %u bytes.\n",
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 28536e352de..3535d3793e6 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -179,14 +179,21 @@ int __init arch_probe_nr_irqs(void)
#ifdef CONFIG_HOTPLUG_CPU
-static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu)
+static bool migrate_one_irq(struct irq_data *d)
{
- pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->irq_data.node, cpu);
+ unsigned int cpu = cpumask_any_and(d->affinity, cpu_online_mask);
+ bool ret = false;
- raw_spin_lock_irq(&desc->lock);
- desc->irq_data.chip->irq_set_affinity(&desc->irq_data,
- cpumask_of(cpu), false);
- raw_spin_unlock_irq(&desc->lock);
+ if (cpu >= nr_cpu_ids) {
+ cpu = cpumask_any(cpu_online_mask);
+ ret = true;
+ }
+
+ pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", d->irq, d->node, cpu);
+
+ d->chip->irq_set_affinity(d, cpumask_of(cpu), true);
+
+ return ret;
}
/*
@@ -198,25 +205,30 @@ void migrate_irqs(void)
{
unsigned int i, cpu = smp_processor_id();
struct irq_desc *desc;
+ unsigned long flags;
+
+ local_irq_save(flags);
for_each_irq_desc(i, desc) {
struct irq_data *d = &desc->irq_data;
+ bool affinity_broken = false;
- if (d->node == cpu) {
- unsigned int newcpu = cpumask_any_and(d->affinity,
- cpu_online_mask);
- if (newcpu >= nr_cpu_ids) {
- if (printk_ratelimit())
- printk(KERN_INFO "IRQ%u no longer affine to CPU%u\n",
- i, cpu);
+ raw_spin_lock(&desc->lock);
+ do {
+ if (desc->action == NULL)
+ break;
- cpumask_setall(d->affinity);
- newcpu = cpumask_any_and(d->affinity,
- cpu_online_mask);
- }
+ if (d->node != cpu)
+ break;
- route_irq(desc, i, newcpu);
- }
+ affinity_broken = migrate_one_irq(d);
+ } while (0);
+ raw_spin_unlock(&desc->lock);
+
+ if (affinity_broken && printk_ratelimit())
+ pr_warning("IRQ%u no longer affine to CPU%u\n", i, cpu);
}
+
+ local_irq_restore(flags);
}
#endif /* CONFIG_HOTPLUG_CPU */
diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c
index 2c1f0050c9c..8f6ed43861f 100644
--- a/arch/arm/kernel/kprobes-decode.c
+++ b/arch/arm/kernel/kprobes-decode.c
@@ -1437,7 +1437,7 @@ arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
return space_cccc_1100_010x(insn, asi);
- } else if ((insn & 0x0e000000) == 0x0c400000) {
+ } else if ((insn & 0x0e000000) == 0x0c000000) {
return space_cccc_110x(insn, asi);
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index c5679f6d9f6..fee7c36349e 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -22,6 +22,7 @@
#include <asm/pgtable.h>
#include <asm/sections.h>
+#include <asm/smp_plat.h>
#include <asm/unwind.h>
#ifdef CONFIG_XIP_KERNEL
@@ -75,6 +76,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
for (i = 0; i < relsec->sh_size / sizeof(Elf32_Rel); i++, rel++) {
unsigned long loc;
Elf32_Sym *sym;
+ const char *symname;
s32 offset;
#ifdef CONFIG_THUMB2_KERNEL
u32 upper, lower, sign, j1, j2;
@@ -82,18 +84,18 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
offset = ELF32_R_SYM(rel->r_info);
if (offset < 0 || offset > (symsec->sh_size / sizeof(Elf32_Sym))) {
- printk(KERN_ERR "%s: bad relocation, section %d reloc %d\n",
+ pr_err("%s: section %u reloc %u: bad relocation sym offset\n",
module->name, relindex, i);
return -ENOEXEC;
}
sym = ((Elf32_Sym *)symsec->sh_addr) + offset;
+ symname = strtab + sym->st_name;
if (rel->r_offset < 0 || rel->r_offset > dstsec->sh_size - sizeof(u32)) {
- printk(KERN_ERR "%s: out of bounds relocation, "
- "section %d reloc %d offset %d size %d\n",
- module->name, relindex, i, rel->r_offset,
- dstsec->sh_size);
+ pr_err("%s: section %u reloc %u sym '%s': out of bounds relocation, offset %d size %u\n",
+ module->name, relindex, i, symname,
+ rel->r_offset, dstsec->sh_size);
return -ENOEXEC;
}
@@ -119,10 +121,10 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
if (offset & 3 ||
offset <= (s32)0xfe000000 ||
offset >= (s32)0x02000000) {
- printk(KERN_ERR
- "%s: relocation out of range, section "
- "%d reloc %d sym '%s'\n", module->name,
- relindex, i, strtab + sym->st_name);
+ pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",
+ module->name, relindex, i, symname,
+ ELF32_R_TYPE(rel->r_info), loc,
+ sym->st_value);
return -ENOEXEC;
}
@@ -195,10 +197,10 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
if (!(offset & 1) ||
offset <= (s32)0xff000000 ||
offset >= (s32)0x01000000) {
- printk(KERN_ERR
- "%s: relocation out of range, section "
- "%d reloc %d sym '%s'\n", module->name,
- relindex, i, strtab + sym->st_name);
+ pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",
+ module->name, relindex, i, symname,
+ ELF32_R_TYPE(rel->r_info), loc,
+ sym->st_value);
return -ENOEXEC;
}
@@ -282,6 +284,7 @@ static const Elf_Shdr *find_mod_section(const Elf32_Ehdr *hdr,
}
extern void fixup_pv_table(const void *, unsigned long);
+extern void fixup_smp(const void *, unsigned long);
int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
struct module *mod)
@@ -336,6 +339,9 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
if (s)
fixup_pv_table((void *)s->sh_addr, s->sh_size);
#endif
+ s = find_mod_section(hdr, sechdrs, ".alt.smp.init");
+ if (s && !is_smp())
+ fixup_smp((void *)s->sh_addr, s->sh_size);
return 0;
}
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 5efa2647a2f..d150ad1ccb5 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -700,7 +700,7 @@ user_backtrace(struct frame_tail __user *tail,
* Frame pointers should strictly progress back up the stack
* (towards higher addresses).
*/
- if (tail >= buftail.fp)
+ if (tail + 1 >= buftail.fp)
return NULL;
return buftail.fp - 1;
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index c058bfc8532..6fc2d228db5 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -30,7 +30,7 @@
* enable the interrupt.
*/
-#ifdef CONFIG_CPU_V6
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
enum armv6_perf_types {
ARMV6_PERFCTR_ICACHE_MISS = 0x0,
ARMV6_PERFCTR_IBUF_STALL = 0x1,
@@ -669,4 +669,4 @@ static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
{
return NULL;
}
-#endif /* CONFIG_CPU_V6 */
+#endif /* CONFIG_CPU_V6 || CONFIG_CPU_V6K */
diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c
index b8af96ea62e..2c79eec1926 100644
--- a/arch/arm/kernel/pmu.c
+++ b/arch/arm/kernel/pmu.c
@@ -97,28 +97,34 @@ set_irq_affinity(int irq,
irq, cpu);
return err;
#else
- return 0;
+ return -EINVAL;
#endif
}
static int
init_cpu_pmu(void)
{
- int i, err = 0;
+ int i, irqs, err = 0;
struct platform_device *pdev = pmu_devices[ARM_PMU_DEVICE_CPU];
- if (!pdev) {
- err = -ENODEV;
- goto out;
- }
+ if (!pdev)
+ return -ENODEV;
+
+ irqs = pdev->num_resources;
+
+ /*
+ * If we have a single PMU interrupt that we can't shift, assume that
+ * we're running on a uniprocessor machine and continue.
+ */
+ if (irqs == 1 && !irq_can_set_affinity(platform_get_irq(pdev, 0)))
+ return 0;
- for (i = 0; i < pdev->num_resources; ++i) {
+ for (i = 0; i < irqs; ++i) {
err = set_irq_affinity(platform_get_irq(pdev, i), i);
if (err)
break;
}
-out:
return err;
}
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 19c6816db61..2bf27f364d0 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -26,8 +26,6 @@
#include <asm/system.h>
#include <asm/traps.h>
-#include "ptrace.h"
-
#define REG_PC 15
#define REG_PSR 16
/*
@@ -184,389 +182,12 @@ put_user_reg(struct task_struct *task, int offset, long data)
return ret;
}
-static inline int
-read_u32(struct task_struct *task, unsigned long addr, u32 *res)
-{
- int ret;
-
- ret = access_process_vm(task, addr, res, sizeof(*res), 0);
-
- return ret == sizeof(*res) ? 0 : -EIO;
-}
-
-static inline int
-read_instr(struct task_struct *task, unsigned long addr, u32 *res)
-{
- int ret;
-
- if (addr & 1) {
- u16 val;
- ret = access_process_vm(task, addr & ~1, &val, sizeof(val), 0);
- ret = ret == sizeof(val) ? 0 : -EIO;
- *res = val;
- } else {
- u32 val;
- ret = access_process_vm(task, addr & ~3, &val, sizeof(val), 0);
- ret = ret == sizeof(val) ? 0 : -EIO;
- *res = val;
- }
- return ret;
-}
-
-/*
- * Get value of register `rn' (in the instruction)
- */
-static unsigned long
-ptrace_getrn(struct task_struct *child, unsigned long insn)
-{
- unsigned int reg = (insn >> 16) & 15;
- unsigned long val;
-
- val = get_user_reg(child, reg);
- if (reg == 15)
- val += 8;
-
- return val;
-}
-
-/*
- * Get value of operand 2 (in an ALU instruction)
- */
-static unsigned long
-ptrace_getaluop2(struct task_struct *child, unsigned long insn)
-{
- unsigned long val;
- int shift;
- int type;
-
- if (insn & 1 << 25) {
- val = insn & 255;
- shift = (insn >> 8) & 15;
- type = 3;
- } else {
- val = get_user_reg (child, insn & 15);
-
- if (insn & (1 << 4))
- shift = (int)get_user_reg (child, (insn >> 8) & 15);
- else
- shift = (insn >> 7) & 31;
-
- type = (insn >> 5) & 3;
- }
-
- switch (type) {
- case 0: val <<= shift; break;
- case 1: val >>= shift; break;
- case 2:
- val = (((signed long)val) >> shift);
- break;
- case 3:
- val = (val >> shift) | (val << (32 - shift));
- break;
- }
- return val;
-}
-
-/*
- * Get value of operand 2 (in a LDR instruction)
- */
-static unsigned long
-ptrace_getldrop2(struct task_struct *child, unsigned long insn)
-{
- unsigned long val;
- int shift;
- int type;
-
- val = get_user_reg(child, insn & 15);
- shift = (insn >> 7) & 31;
- type = (insn >> 5) & 3;
-
- switch (type) {
- case 0: val <<= shift; break;
- case 1: val >>= shift; break;
- case 2:
- val = (((signed long)val) >> shift);
- break;
- case 3:
- val = (val >> shift) | (val << (32 - shift));
- break;
- }
- return val;
-}
-
-#define OP_MASK 0x01e00000
-#define OP_AND 0x00000000
-#define OP_EOR 0x00200000
-#define OP_SUB 0x00400000
-#define OP_RSB 0x00600000
-#define OP_ADD 0x00800000
-#define OP_ADC 0x00a00000
-#define OP_SBC 0x00c00000
-#define OP_RSC 0x00e00000
-#define OP_ORR 0x01800000
-#define OP_MOV 0x01a00000
-#define OP_BIC 0x01c00000
-#define OP_MVN 0x01e00000
-
-static unsigned long
-get_branch_address(struct task_struct *child, unsigned long pc, unsigned long insn)
-{
- u32 alt = 0;
-
- switch (insn & 0x0e000000) {
- case 0x00000000:
- case 0x02000000: {
- /*
- * data processing
- */
- long aluop1, aluop2, ccbit;
-
- if ((insn & 0x0fffffd0) == 0x012fff10) {
- /*
- * bx or blx
- */
- alt = get_user_reg(child, insn & 15);
- break;
- }
-
-
- if ((insn & 0xf000) != 0xf000)
- break;
-
- aluop1 = ptrace_getrn(child, insn);
- aluop2 = ptrace_getaluop2(child, insn);
- ccbit = get_user_reg(child, REG_PSR) & PSR_C_BIT ? 1 : 0;
-
- switch (insn & OP_MASK) {
- case OP_AND: alt = aluop1 & aluop2; break;
- case OP_EOR: alt = aluop1 ^ aluop2; break;
- case OP_SUB: alt = aluop1 - aluop2; break;
- case OP_RSB: alt = aluop2 - aluop1; break;
- case OP_ADD: alt = aluop1 + aluop2; break;
- case OP_ADC: alt = aluop1 + aluop2 + ccbit; break;
- case OP_SBC: alt = aluop1 - aluop2 + ccbit; break;
- case OP_RSC: alt = aluop2 - aluop1 + ccbit; break;
- case OP_ORR: alt = aluop1 | aluop2; break;
- case OP_MOV: alt = aluop2; break;
- case OP_BIC: alt = aluop1 & ~aluop2; break;
- case OP_MVN: alt = ~aluop2; break;
- }
- break;
- }
-
- case 0x04000000:
- case 0x06000000:
- /*
- * ldr
- */
- if ((insn & 0x0010f000) == 0x0010f000) {
- unsigned long base;
-
- base = ptrace_getrn(child, insn);
- if (insn & 1 << 24) {
- long aluop2;
-
- if (insn & 0x02000000)
- aluop2 = ptrace_getldrop2(child, insn);
- else
- aluop2 = insn & 0xfff;
-
- if (insn & 1 << 23)
- base += aluop2;
- else
- base -= aluop2;
- }
- read_u32(child, base, &alt);
- }
- break;
-
- case 0x08000000:
- /*
- * ldm
- */
- if ((insn & 0x00108000) == 0x00108000) {
- unsigned long base;
- unsigned int nr_regs;
-
- if (insn & (1 << 23)) {
- nr_regs = hweight16(insn & 65535) << 2;
-
- if (!(insn & (1 << 24)))
- nr_regs -= 4;
- } else {
- if (insn & (1 << 24))
- nr_regs = -4;
- else
- nr_regs = 0;
- }
-
- base = ptrace_getrn(child, insn);
-
- read_u32(child, base + nr_regs, &alt);
- break;
- }
- break;
-
- case 0x0a000000: {
- /*
- * bl or b
- */
- signed long displ;
- /* It's a branch/branch link: instead of trying to
- * figure out whether the branch will be taken or not,
- * we'll put a breakpoint at both locations. This is
- * simpler, more reliable, and probably not a whole lot
- * slower than the alternative approach of emulating the
- * branch.
- */
- displ = (insn & 0x00ffffff) << 8;
- displ = (displ >> 6) + 8;
- if (displ != 0 && displ != 4)
- alt = pc + displ;
- }
- break;
- }
-
- return alt;
-}
-
-static int
-swap_insn(struct task_struct *task, unsigned long addr,
- void *old_insn, void *new_insn, int size)
-{
- int ret;
-
- ret = access_process_vm(task, addr, old_insn, size, 0);
- if (ret == size)
- ret = access_process_vm(task, addr, new_insn, size, 1);
- return ret;
-}
-
-static void
-add_breakpoint(struct task_struct *task, struct debug_info *dbg, unsigned long addr)
-{
- int nr = dbg->nsaved;
-
- if (nr < 2) {
- u32 new_insn = BREAKINST_ARM;
- int res;
-
- res = swap_insn(task, addr, &dbg->bp[nr].insn, &new_insn, 4);
-
- if (res == 4) {
- dbg->bp[nr].address = addr;
- dbg->nsaved += 1;
- }
- } else
- printk(KERN_ERR "ptrace: too many breakpoints\n");
-}
-
-/*
- * Clear one breakpoint in the user program. We copy what the hardware
- * does and use bit 0 of the address to indicate whether this is a Thumb
- * breakpoint or an ARM breakpoint.
- */
-static void clear_breakpoint(struct task_struct *task, struct debug_entry *bp)
-{
- unsigned long addr = bp->address;
- union debug_insn old_insn;
- int ret;
-
- if (addr & 1) {
- ret = swap_insn(task, addr & ~1, &old_insn.thumb,
- &bp->insn.thumb, 2);
-
- if (ret != 2 || old_insn.thumb != BREAKINST_THUMB)
- printk(KERN_ERR "%s:%d: corrupted Thumb breakpoint at "
- "0x%08lx (0x%04x)\n", task->comm,
- task_pid_nr(task), addr, old_insn.thumb);
- } else {
- ret = swap_insn(task, addr & ~3, &old_insn.arm,
- &bp->insn.arm, 4);
-
- if (ret != 4 || old_insn.arm != BREAKINST_ARM)
- printk(KERN_ERR "%s:%d: corrupted ARM breakpoint at "
- "0x%08lx (0x%08x)\n", task->comm,
- task_pid_nr(task), addr, old_insn.arm);
- }
-}
-
-void ptrace_set_bpt(struct task_struct *child)
-{
- struct pt_regs *regs;
- unsigned long pc;
- u32 insn;
- int res;
-
- regs = task_pt_regs(child);
- pc = instruction_pointer(regs);
-
- if (thumb_mode(regs)) {
- printk(KERN_WARNING "ptrace: can't handle thumb mode\n");
- return;
- }
-
- res = read_instr(child, pc, &insn);
- if (!res) {
- struct debug_info *dbg = &child->thread.debug;
- unsigned long alt;
-
- dbg->nsaved = 0;
-
- alt = get_branch_address(child, pc, insn);
- if (alt)
- add_breakpoint(child, dbg, alt);
-
- /*
- * Note that we ignore the result of setting the above
- * breakpoint since it may fail. When it does, this is
- * not so much an error, but a forewarning that we may
- * be receiving a prefetch abort shortly.
- *
- * If we don't set this breakpoint here, then we can
- * lose control of the thread during single stepping.
- */
- if (!alt || predicate(insn) != PREDICATE_ALWAYS)
- add_breakpoint(child, dbg, pc + 4);
- }
-}
-
-/*
- * Ensure no single-step breakpoint is pending. Returns non-zero
- * value if child was being single-stepped.
- */
-void ptrace_cancel_bpt(struct task_struct *child)
-{
- int i, nsaved = child->thread.debug.nsaved;
-
- child->thread.debug.nsaved = 0;
-
- if (nsaved > 2) {
- printk("ptrace_cancel_bpt: bogus nsaved: %d!\n", nsaved);
- nsaved = 2;
- }
-
- for (i = 0; i < nsaved; i++)
- clear_breakpoint(child, &child->thread.debug.bp[i]);
-}
-
-void user_disable_single_step(struct task_struct *task)
-{
- task->ptrace &= ~PT_SINGLESTEP;
- ptrace_cancel_bpt(task);
-}
-
-void user_enable_single_step(struct task_struct *task)
-{
- task->ptrace |= PT_SINGLESTEP;
-}
-
/*
* Called by kernel/ptrace.c when detaching..
*/
void ptrace_disable(struct task_struct *child)
{
- user_disable_single_step(child);
+ /* Nothing to do. */
}
/*
@@ -576,8 +197,6 @@ void ptrace_break(struct task_struct *tsk, struct pt_regs *regs)
{
siginfo_t info;
- ptrace_cancel_bpt(tsk);
-
info.si_signo = SIGTRAP;
info.si_errno = 0;
info.si_code = TRAP_BRKPT;
@@ -996,10 +615,10 @@ static int ptrace_gethbpregs(struct task_struct *tsk, long num,
while (!(arch_ctrl.len & 0x1))
arch_ctrl.len >>= 1;
- if (idx & 0x1)
- reg = encode_ctrl_reg(arch_ctrl);
- else
+ if (num & 0x1)
reg = bp->attr.bp_addr;
+ else
+ reg = encode_ctrl_reg(arch_ctrl);
}
put:
diff --git a/arch/arm/kernel/ptrace.h b/arch/arm/kernel/ptrace.h
deleted file mode 100644
index 3926605b82e..00000000000
--- a/arch/arm/kernel/ptrace.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * linux/arch/arm/kernel/ptrace.h
- *
- * Copyright (C) 2000-2003 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/ptrace.h>
-
-extern void ptrace_cancel_bpt(struct task_struct *);
-extern void ptrace_set_bpt(struct task_struct *);
-extern void ptrace_break(struct task_struct *, struct pt_regs *);
-
-/*
- * Send SIGTRAP if we're single-stepping
- */
-static inline void single_step_trap(struct task_struct *task)
-{
- if (task->ptrace & PT_SINGLESTEP) {
- ptrace_cancel_bpt(task);
- send_sig(SIGTRAP, task, 1);
- }
-}
-
-static inline void single_step_clear(struct task_struct *task)
-{
- if (task->ptrace & PT_SINGLESTEP)
- ptrace_cancel_bpt(task);
-}
-
-static inline void single_step_set(struct task_struct *task)
-{
- if (task->ptrace & PT_SINGLESTEP)
- ptrace_set_bpt(task);
-}
diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c
index df246da4cec..0b13a72f855 100644
--- a/arch/arm/kernel/return_address.c
+++ b/arch/arm/kernel/return_address.c
@@ -9,6 +9,7 @@
* the Free Software Foundation.
*/
#include <linux/module.h>
+#include <linux/ftrace.h>
#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
#include <linux/sched.h>
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index f43f041a097..d1da9217427 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -226,8 +226,8 @@ int cpu_architecture(void)
* Register 0 and check for VMSAv7 or PMSAv7 */
asm("mrc p15, 0, %0, c0, c1, 4"
: "=r" (mmfr0));
- if ((mmfr0 & 0x0000000f) == 0x00000003 ||
- (mmfr0 & 0x000000f0) == 0x00000030)
+ if ((mmfr0 & 0x0000000f) >= 0x00000003 ||
+ (mmfr0 & 0x000000f0) >= 0x00000030)
cpu_arch = CPU_ARCH_ARMv7;
else if ((mmfr0 & 0x0000000f) == 0x00000002 ||
(mmfr0 & 0x000000f0) == 0x00000020)
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 907d5a620bc..cb839831764 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -20,7 +20,6 @@
#include <asm/unistd.h>
#include <asm/vfp.h>
-#include "ptrace.h"
#include "signal.h"
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
@@ -348,8 +347,6 @@ asmlinkage int sys_sigreturn(struct pt_regs *regs)
if (restore_sigframe(regs, frame))
goto badframe;
- single_step_trap(current);
-
return regs->ARM_r0;
badframe:
@@ -383,8 +380,6 @@ asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
if (do_sigaltstack(&frame->sig.uc.uc_stack, NULL, regs->ARM_sp) == -EFAULT)
goto badframe;
- single_step_trap(current);
-
return regs->ARM_r0;
badframe:
@@ -474,7 +469,9 @@ setup_return(struct pt_regs *regs, struct k_sigaction *ka,
unsigned long handler = (unsigned long)ka->sa.sa_handler;
unsigned long retcode;
int thumb = 0;
- unsigned long cpsr = regs->ARM_cpsr & ~PSR_f;
+ unsigned long cpsr = regs->ARM_cpsr & ~(PSR_f | PSR_E_BIT);
+
+ cpsr |= PSR_ENDSTATE;
/*
* Maybe we need to deliver a 32-bit signal to a 26-bit task.
@@ -704,8 +701,6 @@ static void do_signal(struct pt_regs *regs, int syscall)
if (try_to_freeze())
goto no_signal;
- single_step_clear(current);
-
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
sigset_t *oldset;
@@ -724,7 +719,6 @@ static void do_signal(struct pt_regs *regs, int syscall)
if (test_thread_flag(TIF_RESTORE_SIGMASK))
clear_thread_flag(TIF_RESTORE_SIGMASK);
}
- single_step_set(current);
return;
}
@@ -770,7 +764,6 @@ static void do_signal(struct pt_regs *regs, int syscall)
sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
}
}
- single_step_set(current);
}
asmlinkage void
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
new file mode 100644
index 00000000000..bfad698a02e
--- /dev/null
+++ b/arch/arm/kernel/sleep.S
@@ -0,0 +1,134 @@
+#include <linux/linkage.h>
+#include <linux/threads.h>
+#include <asm/asm-offsets.h>
+#include <asm/assembler.h>
+#include <asm/glue-cache.h>
+#include <asm/glue-proc.h>
+#include <asm/system.h>
+ .text
+
+/*
+ * Save CPU state for a suspend
+ * r1 = v:p offset
+ * r3 = virtual return function
+ * Note: sp is decremented to allocate space for CPU state on stack
+ * r0-r3,r9,r10,lr corrupted
+ */
+ENTRY(cpu_suspend)
+ mov r9, lr
+#ifdef MULTI_CPU
+ ldr r10, =processor
+ mov r2, sp @ current virtual SP
+ ldr r0, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
+ ldr ip, [r10, #CPU_DO_RESUME] @ virtual resume function
+ sub sp, sp, r0 @ allocate CPU state on stack
+ mov r0, sp @ save pointer
+ add ip, ip, r1 @ convert resume fn to phys
+ stmfd sp!, {r1, r2, r3, ip} @ save v:p, virt SP, retfn, phys resume fn
+ ldr r3, =sleep_save_sp
+ add r2, sp, r1 @ convert SP to phys
+#ifdef CONFIG_SMP
+ ALT_SMP(mrc p15, 0, lr, c0, c0, 5)
+ ALT_UP(mov lr, #0)
+ and lr, lr, #15
+ str r2, [r3, lr, lsl #2] @ save phys SP
+#else
+ str r2, [r3] @ save phys SP
+#endif
+ mov lr, pc
+ ldr pc, [r10, #CPU_DO_SUSPEND] @ save CPU state
+#else
+ mov r2, sp @ current virtual SP
+ ldr r0, =cpu_suspend_size
+ sub sp, sp, r0 @ allocate CPU state on stack
+ mov r0, sp @ save pointer
+ stmfd sp!, {r1, r2, r3} @ save v:p, virt SP, return fn
+ ldr r3, =sleep_save_sp
+ add r2, sp, r1 @ convert SP to phys
+#ifdef CONFIG_SMP
+ ALT_SMP(mrc p15, 0, lr, c0, c0, 5)
+ ALT_UP(mov lr, #0)
+ and lr, lr, #15
+ str r2, [r3, lr, lsl #2] @ save phys SP
+#else
+ str r2, [r3] @ save phys SP
+#endif
+ bl cpu_do_suspend
+#endif
+
+ @ flush data cache
+#ifdef MULTI_CACHE
+ ldr r10, =cpu_cache
+ mov lr, r9
+ ldr pc, [r10, #CACHE_FLUSH_KERN_ALL]
+#else
+ mov lr, r9
+ b __cpuc_flush_kern_all
+#endif
+ENDPROC(cpu_suspend)
+ .ltorg
+
+/*
+ * r0 = control register value
+ * r1 = v:p offset (preserved by cpu_do_resume)
+ * r2 = phys page table base
+ * r3 = L1 section flags
+ */
+ENTRY(cpu_resume_mmu)
+ adr r4, cpu_resume_turn_mmu_on
+ mov r4, r4, lsr #20
+ orr r3, r3, r4, lsl #20
+ ldr r5, [r2, r4, lsl #2] @ save old mapping
+ str r3, [r2, r4, lsl #2] @ setup 1:1 mapping for mmu code
+ sub r2, r2, r1
+ ldr r3, =cpu_resume_after_mmu
+ bic r1, r0, #CR_C @ ensure D-cache is disabled
+ b cpu_resume_turn_mmu_on
+ENDPROC(cpu_resume_mmu)
+ .ltorg
+ .align 5
+cpu_resume_turn_mmu_on:
+ mcr p15, 0, r1, c1, c0, 0 @ turn on MMU, I-cache, etc
+ mrc p15, 0, r1, c0, c0, 0 @ read id reg
+ mov r1, r1
+ mov r1, r1
+ mov pc, r3 @ jump to virtual address
+ENDPROC(cpu_resume_turn_mmu_on)
+cpu_resume_after_mmu:
+ str r5, [r2, r4, lsl #2] @ restore old mapping
+ mcr p15, 0, r0, c1, c0, 0 @ turn on D-cache
+ mov pc, lr
+ENDPROC(cpu_resume_after_mmu)
+
+/*
+ * Note: Yes, part of the following code is located into the .data section.
+ * This is to allow sleep_save_sp to be accessed with a relative load
+ * while we can't rely on any MMU translation. We could have put
+ * sleep_save_sp in the .text section as well, but some setups might
+ * insist on it to be truly read-only.
+ */
+ .data
+ .align
+ENTRY(cpu_resume)
+#ifdef CONFIG_SMP
+ adr r0, sleep_save_sp
+ ALT_SMP(mrc p15, 0, r1, c0, c0, 5)
+ ALT_UP(mov r1, #0)
+ and r1, r1, #15
+ ldr r0, [r0, r1, lsl #2] @ stack phys addr
+#else
+ ldr r0, sleep_save_sp @ stack phys addr
+#endif
+ msr cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off
+#ifdef MULTI_CPU
+ ldmia r0!, {r1, sp, lr, pc} @ load v:p, stack, return fn, resume fn
+#else
+ ldmia r0!, {r1, sp, lr} @ load v:p, stack, return fn
+ b cpu_do_resume
+#endif
+ENDPROC(cpu_resume)
+
+sleep_save_sp:
+ .rept CONFIG_NR_CPUS
+ .long 0 @ preserve stack phys ptr here
+ .endr
diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
index 9ab4149bd98..a1e757c3439 100644
--- a/arch/arm/kernel/smp_scu.c
+++ b/arch/arm/kernel/smp_scu.c
@@ -50,3 +50,26 @@ void __init scu_enable(void __iomem *scu_base)
*/
flush_cache_all();
}
+
+/*
+ * Set the executing CPUs power mode as defined. This will be in
+ * preparation for it executing a WFI instruction.
+ *
+ * This function must be called with preemption disabled, and as it
+ * has the side effect of disabling coherency, caches must have been
+ * flushed. Interrupts must also have been disabled.
+ */
+int scu_power_mode(void __iomem *scu_base, unsigned int mode)
+{
+ unsigned int val;
+ int cpu = smp_processor_id();
+
+ if (mode > 3 || mode == 1 || cpu > 3)
+ return -EINVAL;
+
+ val = __raw_readb(scu_base + SCU_CPU_STATUS + cpu) & ~0x03;
+ val |= mode;
+ __raw_writeb(val, scu_base + SCU_CPU_STATUS + cpu);
+
+ return 0;
+}
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index ee57640ba2b..21ac43f1c2d 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -23,6 +23,7 @@
#include <linux/kexec.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/sched.h>
#include <asm/atomic.h>
#include <asm/cacheflush.h>
@@ -32,7 +33,6 @@
#include <asm/unwind.h>
#include <asm/tls.h>
-#include "ptrace.h"
#include "signal.h"
static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" };
@@ -256,7 +256,7 @@ static int __die(const char *str, int err, struct thread_info *thread, struct pt
return ret;
}
-DEFINE_SPINLOCK(die_lock);
+static DEFINE_SPINLOCK(die_lock);
/*
* This function is protected against re-entrancy.
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 45b5651777e..dfbb377e251 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -21,6 +21,12 @@
#define ARM_CPU_KEEP(x)
#endif
+#if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)
+#define ARM_EXIT_KEEP(x) x
+#else
+#define ARM_EXIT_KEEP(x)
+#endif
+
OUTPUT_ARCH(arm)
ENTRY(stext)
@@ -43,6 +49,7 @@ SECTIONS
_sinittext = .;
HEAD_TEXT
INIT_TEXT
+ ARM_EXIT_KEEP(EXIT_TEXT)
_einittext = .;
ARM_CPU_DISCARD(PROC_INFO)
__arch_info_begin = .;
@@ -71,6 +78,7 @@ SECTIONS
#ifndef CONFIG_XIP_KERNEL
__init_begin = _stext;
INIT_DATA
+ ARM_EXIT_KEEP(EXIT_DATA)
#endif
}
@@ -166,6 +174,7 @@ SECTIONS
. = ALIGN(PAGE_SIZE);
__init_begin = .;
INIT_DATA
+ ARM_EXIT_KEEP(EXIT_DATA)
. = ALIGN(PAGE_SIZE);
__init_end = .;
#endif
@@ -251,6 +260,8 @@ SECTIONS
}
#endif
+ NOTES
+
BSS_SECTION(0, 0, 0)
_end = .;
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index d42252918bf..10d868a5a48 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -1,44 +1,52 @@
-
-#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_32v6K)
+#if __LINUX_ARM_ARCH__ >= 6
.macro bitop, instr
+ ands ip, r1, #3
+ strneb r1, [ip] @ assert word-aligned
mov r2, #1
- and r3, r0, #7 @ Get bit offset
- add r1, r1, r0, lsr #3 @ Get byte offset
+ and r3, r0, #31 @ Get bit offset
+ mov r0, r0, lsr #5
+ add r1, r1, r0, lsl #2 @ Get word offset
mov r3, r2, lsl r3
-1: ldrexb r2, [r1]
+1: ldrex r2, [r1]
\instr r2, r2, r3
- strexb r0, r2, [r1]
+ strex r0, r2, [r1]
cmp r0, #0
bne 1b
- mov pc, lr
+ bx lr
.endm
.macro testop, instr, store
- and r3, r0, #7 @ Get bit offset
+ ands ip, r1, #3
+ strneb r1, [ip] @ assert word-aligned
mov r2, #1
- add r1, r1, r0, lsr #3 @ Get byte offset
+ and r3, r0, #31 @ Get bit offset
+ mov r0, r0, lsr #5
+ add r1, r1, r0, lsl #2 @ Get word offset
mov r3, r2, lsl r3 @ create mask
smp_dmb
-1: ldrexb r2, [r1]
+1: ldrex r2, [r1]
ands r0, r2, r3 @ save old value of bit
- \instr r2, r2, r3 @ toggle bit
- strexb ip, r2, [r1]
+ \instr r2, r2, r3 @ toggle bit
+ strex ip, r2, [r1]
cmp ip, #0
bne 1b
smp_dmb
cmp r0, #0
movne r0, #1
-2: mov pc, lr
+2: bx lr
.endm
#else
.macro bitop, instr
- and r2, r0, #7
+ ands ip, r1, #3
+ strneb r1, [ip] @ assert word-aligned
+ and r2, r0, #31
+ mov r0, r0, lsr #5
mov r3, #1
mov r3, r3, lsl r2
save_and_disable_irqs ip
- ldrb r2, [r1, r0, lsr #3]
+ ldr r2, [r1, r0, lsl #2]
\instr r2, r2, r3
- strb r2, [r1, r0, lsr #3]
+ str r2, [r1, r0, lsl #2]
restore_irqs ip
mov pc, lr
.endm
@@ -52,11 +60,13 @@
* to avoid dirtying the data cache.
*/
.macro testop, instr, store
- add r1, r1, r0, lsr #3
- and r3, r0, #7
- mov r0, #1
+ ands ip, r1, #3
+ strneb r1, [ip] @ assert word-aligned
+ and r3, r0, #31
+ mov r0, r0, lsr #5
save_and_disable_irqs ip
- ldrb r2, [r1]
+ ldr r2, [r1, r0, lsl #2]!
+ mov r0, #1
tst r2, r0, lsl r3
\instr r2, r2, r0, lsl r3
\store r2, [r1]
diff --git a/arch/arm/lib/changebit.S b/arch/arm/lib/changebit.S
index 80f3115cbee..68ed5b62e83 100644
--- a/arch/arm/lib/changebit.S
+++ b/arch/arm/lib/changebit.S
@@ -12,12 +12,6 @@
#include "bitops.h"
.text
-/* Purpose : Function to change a bit
- * Prototype: int change_bit(int bit, void *addr)
- */
-ENTRY(_change_bit_be)
- eor r0, r0, #0x18 @ big endian byte ordering
-ENTRY(_change_bit_le)
+ENTRY(_change_bit)
bitop eor
-ENDPROC(_change_bit_be)
-ENDPROC(_change_bit_le)
+ENDPROC(_change_bit)
diff --git a/arch/arm/lib/clearbit.S b/arch/arm/lib/clearbit.S
index 1a63e43a1df..4c04c3b51ee 100644
--- a/arch/arm/lib/clearbit.S
+++ b/arch/arm/lib/clearbit.S
@@ -12,13 +12,6 @@
#include "bitops.h"
.text
-/*
- * Purpose : Function to clear a bit
- * Prototype: int clear_bit(int bit, void *addr)
- */
-ENTRY(_clear_bit_be)
- eor r0, r0, #0x18 @ big endian byte ordering
-ENTRY(_clear_bit_le)
+ENTRY(_clear_bit)
bitop bic
-ENDPROC(_clear_bit_be)
-ENDPROC(_clear_bit_le)
+ENDPROC(_clear_bit)
diff --git a/arch/arm/lib/setbit.S b/arch/arm/lib/setbit.S
index 1dd7176c4b2..bbee5c66a23 100644
--- a/arch/arm/lib/setbit.S
+++ b/arch/arm/lib/setbit.S
@@ -12,13 +12,6 @@
#include "bitops.h"
.text
-/*
- * Purpose : Function to set a bit
- * Prototype: int set_bit(int bit, void *addr)
- */
-ENTRY(_set_bit_be)
- eor r0, r0, #0x18 @ big endian byte ordering
-ENTRY(_set_bit_le)
+ENTRY(_set_bit)
bitop orr
-ENDPROC(_set_bit_be)
-ENDPROC(_set_bit_le)
+ENDPROC(_set_bit)
diff --git a/arch/arm/lib/testchangebit.S b/arch/arm/lib/testchangebit.S
index 5c98dc567f0..15a4d431f22 100644
--- a/arch/arm/lib/testchangebit.S
+++ b/arch/arm/lib/testchangebit.S
@@ -12,9 +12,6 @@
#include "bitops.h"
.text
-ENTRY(_test_and_change_bit_be)
- eor r0, r0, #0x18 @ big endian byte ordering
-ENTRY(_test_and_change_bit_le)
- testop eor, strb
-ENDPROC(_test_and_change_bit_be)
-ENDPROC(_test_and_change_bit_le)
+ENTRY(_test_and_change_bit)
+ testop eor, str
+ENDPROC(_test_and_change_bit)
diff --git a/arch/arm/lib/testclearbit.S b/arch/arm/lib/testclearbit.S
index 543d7094d18..521b66b5b95 100644
--- a/arch/arm/lib/testclearbit.S
+++ b/arch/arm/lib/testclearbit.S
@@ -12,9 +12,6 @@
#include "bitops.h"
.text
-ENTRY(_test_and_clear_bit_be)
- eor r0, r0, #0x18 @ big endian byte ordering
-ENTRY(_test_and_clear_bit_le)
- testop bicne, strneb
-ENDPROC(_test_and_clear_bit_be)
-ENDPROC(_test_and_clear_bit_le)
+ENTRY(_test_and_clear_bit)
+ testop bicne, strne
+ENDPROC(_test_and_clear_bit)
diff --git a/arch/arm/lib/testsetbit.S b/arch/arm/lib/testsetbit.S
index 0b3f390401c..1c98cc2185b 100644
--- a/arch/arm/lib/testsetbit.S
+++ b/arch/arm/lib/testsetbit.S
@@ -12,9 +12,6 @@
#include "bitops.h"
.text
-ENTRY(_test_and_set_bit_be)
- eor r0, r0, #0x18 @ big endian byte ordering
-ENTRY(_test_and_set_bit_le)
- testop orreq, streqb
-ENDPROC(_test_and_set_bit_be)
-ENDPROC(_test_and_set_bit_le)
+ENTRY(_test_and_set_bit)
+ testop orreq, streq
+ENDPROC(_test_and_set_bit)
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 0a99b3cedd7..17f7d9b3214 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -153,6 +153,7 @@ static struct i2c_board_info __initdata snapper9260_i2c_devices[] = {
{
/* RTC */
I2C_BOARD_INFO("isl1208", 0x6f),
+ .irq = gpio_to_irq(AT91_PIN_PA31),
},
};
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index bfdd8ab26dc..ddeb6453675 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -220,15 +220,8 @@ extern void at91_gpio_resume(void);
#define gpio_set_value __gpio_set_value
#define gpio_cansleep __gpio_cansleep
-static inline int gpio_to_irq(unsigned gpio)
-{
- return gpio;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return irq;
-}
+#define gpio_to_irq(gpio) (gpio)
+#define irq_to_gpio(irq) (irq)
#endif /* __ASSEMBLY__ */
diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c
index 343de73161f..4a68c2b1ec1 100644
--- a/arch/arm/mach-davinci/cpufreq.c
+++ b/arch/arm/mach-davinci/cpufreq.c
@@ -132,7 +132,7 @@ out:
return ret;
}
-static int __init davinci_cpu_init(struct cpufreq_policy *policy)
+static int davinci_cpu_init(struct cpufreq_policy *policy)
{
int result = 0;
struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 9eec63070e0..beda8a4133a 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -480,8 +480,15 @@ static struct platform_device da850_mcasp_device = {
.resource = da850_mcasp_resources,
};
+struct platform_device davinci_pcm_device = {
+ .name = "davinci-pcm-audio",
+ .id = -1,
+};
+
void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata)
{
+ platform_device_register(&davinci_pcm_device);
+
/* DA830/OMAP-L137 has 3 instances of McASP */
if (cpu_is_davinci_da830() && id == 1) {
da830_mcasp1_device.dev.platform_data = pdata;
diff --git a/arch/arm/mach-davinci/gpio-tnetv107x.c b/arch/arm/mach-davinci/gpio-tnetv107x.c
index d10298620e2..3fa3e2867e1 100644
--- a/arch/arm/mach-davinci/gpio-tnetv107x.c
+++ b/arch/arm/mach-davinci/gpio-tnetv107x.c
@@ -58,7 +58,7 @@ static int tnetv107x_gpio_request(struct gpio_chip *chip, unsigned offset)
spin_lock_irqsave(&ctlr->lock, flags);
- gpio_reg_set_bit(&regs->enable, gpio);
+ gpio_reg_set_bit(regs->enable, gpio);
spin_unlock_irqrestore(&ctlr->lock, flags);
@@ -74,7 +74,7 @@ static void tnetv107x_gpio_free(struct gpio_chip *chip, unsigned offset)
spin_lock_irqsave(&ctlr->lock, flags);
- gpio_reg_clear_bit(&regs->enable, gpio);
+ gpio_reg_clear_bit(regs->enable, gpio);
spin_unlock_irqrestore(&ctlr->lock, flags);
}
@@ -88,7 +88,7 @@ static int tnetv107x_gpio_dir_in(struct gpio_chip *chip, unsigned offset)
spin_lock_irqsave(&ctlr->lock, flags);
- gpio_reg_set_bit(&regs->direction, gpio);
+ gpio_reg_set_bit(regs->direction, gpio);
spin_unlock_irqrestore(&ctlr->lock, flags);
@@ -106,11 +106,11 @@ static int tnetv107x_gpio_dir_out(struct gpio_chip *chip,
spin_lock_irqsave(&ctlr->lock, flags);
if (value)
- gpio_reg_set_bit(&regs->data_out, gpio);
+ gpio_reg_set_bit(regs->data_out, gpio);
else
- gpio_reg_clear_bit(&regs->data_out, gpio);
+ gpio_reg_clear_bit(regs->data_out, gpio);
- gpio_reg_clear_bit(&regs->direction, gpio);
+ gpio_reg_clear_bit(regs->direction, gpio);
spin_unlock_irqrestore(&ctlr->lock, flags);
@@ -124,7 +124,7 @@ static int tnetv107x_gpio_get(struct gpio_chip *chip, unsigned offset)
unsigned gpio = chip->base + offset;
int ret;
- ret = gpio_reg_get_bit(&regs->data_in, gpio);
+ ret = gpio_reg_get_bit(regs->data_in, gpio);
return ret ? 1 : 0;
}
@@ -140,9 +140,9 @@ static void tnetv107x_gpio_set(struct gpio_chip *chip,
spin_lock_irqsave(&ctlr->lock, flags);
if (value)
- gpio_reg_set_bit(&regs->data_out, gpio);
+ gpio_reg_set_bit(regs->data_out, gpio);
else
- gpio_reg_clear_bit(&regs->data_out, gpio);
+ gpio_reg_clear_bit(regs->data_out, gpio);
spin_unlock_irqrestore(&ctlr->lock, flags);
}
diff --git a/arch/arm/mach-davinci/include/mach/clkdev.h b/arch/arm/mach-davinci/include/mach/clkdev.h
index 730c49d1ebd..14a50488718 100644
--- a/arch/arm/mach-davinci/include/mach/clkdev.h
+++ b/arch/arm/mach-davinci/include/mach/clkdev.h
@@ -1,6 +1,8 @@
#ifndef __MACH_CLKDEV_H
#define __MACH_CLKDEV_H
+struct clk;
+
static inline int __clk_get(struct clk *clk)
{
return 1;
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index a4ed3900912..dd937c526a4 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -9,7 +9,7 @@ config MACH_DOVE_DB
Say 'Y' here if you want your kernel to support the
Marvell DB-MV88AP510 Development Board.
- config MACH_CM_A510
+config MACH_CM_A510
bool "CompuLab CM-A510 Board"
help
Say 'Y' here if you want your kernel to support the
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index ffdf87be295..82079545adc 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -838,7 +838,7 @@ EXPORT_SYMBOL(ep93xx_i2s_release);
static struct resource ep93xx_ac97_resources[] = {
{
.start = EP93XX_AAC_PHYS_BASE,
- .end = EP93XX_AAC_PHYS_BASE + 0xb0 - 1,
+ .end = EP93XX_AAC_PHYS_BASE + 0xac - 1,
.flags = IORESOURCE_MEM,
},
{
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 4b043165213..9969bb115f6 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -30,8 +30,13 @@
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
+#include <linux/spi/spi.h>
+
+#include <sound/cs4271.h>
#include <mach/hardware.h>
+#include <mach/fb.h>
+#include <mach/ep93xx_spi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -93,6 +98,83 @@ static void __init edb93xx_register_i2c(void)
/*************************************************************************
+ * EDB93xx SPI peripheral handling
+ *************************************************************************/
+static struct cs4271_platform_data edb93xx_cs4271_data = {
+ .gpio_nreset = -EINVAL, /* filled in later */
+};
+
+static int edb93xx_cs4271_hw_setup(struct spi_device *spi)
+{
+ return gpio_request_one(EP93XX_GPIO_LINE_EGPIO6,
+ GPIOF_OUT_INIT_HIGH, spi->modalias);
+}
+
+static void edb93xx_cs4271_hw_cleanup(struct spi_device *spi)
+{
+ gpio_free(EP93XX_GPIO_LINE_EGPIO6);
+}
+
+static void edb93xx_cs4271_hw_cs_control(struct spi_device *spi, int value)
+{
+ gpio_set_value(EP93XX_GPIO_LINE_EGPIO6, value);
+}
+
+static struct ep93xx_spi_chip_ops edb93xx_cs4271_hw = {
+ .setup = edb93xx_cs4271_hw_setup,
+ .cleanup = edb93xx_cs4271_hw_cleanup,
+ .cs_control = edb93xx_cs4271_hw_cs_control,
+};
+
+static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
+ {
+ .modalias = "cs4271",
+ .platform_data = &edb93xx_cs4271_data,
+ .controller_data = &edb93xx_cs4271_hw,
+ .max_speed_hz = 6000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_3,
+ },
+};
+
+static struct ep93xx_spi_info edb93xx_spi_info __initdata = {
+ .num_chipselect = ARRAY_SIZE(edb93xx_spi_board_info),
+};
+
+static void __init edb93xx_register_spi(void)
+{
+ if (machine_is_edb9301() || machine_is_edb9302())
+ edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO1;
+ else if (machine_is_edb9302a() || machine_is_edb9307a())
+ edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_H(2);
+ else if (machine_is_edb9315a())
+ edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;
+
+ ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info,
+ ARRAY_SIZE(edb93xx_spi_board_info));
+}
+
+
+/*************************************************************************
+ * EDB93xx I2S
+ *************************************************************************/
+static int __init edb93xx_has_audio(void)
+{
+ return (machine_is_edb9301() || machine_is_edb9302() ||
+ machine_is_edb9302a() || machine_is_edb9307a() ||
+ machine_is_edb9315a());
+}
+
+static void __init edb93xx_register_i2s(void)
+{
+ if (edb93xx_has_audio()) {
+ ep93xx_register_i2s();
+ }
+}
+
+
+/*************************************************************************
* EDB93xx pwm
*************************************************************************/
static void __init edb93xx_register_pwm(void)
@@ -111,13 +193,47 @@ static void __init edb93xx_register_pwm(void)
}
+/*************************************************************************
+ * EDB93xx framebuffer
+ *************************************************************************/
+static struct ep93xxfb_mach_info __initdata edb93xxfb_info = {
+ .num_modes = EP93XXFB_USE_MODEDB,
+ .bpp = 16,
+ .flags = 0,
+};
+
+static int __init edb93xx_has_fb(void)
+{
+ /* These platforms have an ep93xx with video capability */
+ return machine_is_edb9307() || machine_is_edb9307a() ||
+ machine_is_edb9312() || machine_is_edb9315() ||
+ machine_is_edb9315a();
+}
+
+static void __init edb93xx_register_fb(void)
+{
+ if (!edb93xx_has_fb())
+ return;
+
+ if (machine_is_edb9307a() || machine_is_edb9315a())
+ edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN0;
+ else
+ edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN3;
+
+ ep93xx_register_fb(&edb93xxfb_info);
+}
+
+
static void __init edb93xx_init_machine(void)
{
ep93xx_init_devices();
edb93xx_register_flash();
ep93xx_register_eth(&edb93xx_eth_data, 1);
edb93xx_register_i2c();
+ edb93xx_register_spi();
+ edb93xx_register_i2s();
edb93xx_register_pwm();
+ edb93xx_register_fb();
}
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index bec34b83495..a889fa7c3ba 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -61,7 +61,7 @@ static inline void ep93xx_gpio_int_mask(unsigned line)
gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
}
-void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
+static void ep93xx_gpio_int_debounce(unsigned int irq, bool enable)
{
int line = irq_to_gpio(irq);
int port = line >> 3;
@@ -75,7 +75,6 @@ void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
__raw_writeb(gpio_int_debounce[port],
EP93XX_GPIO_REG(int_debounce_register_offset[port]));
}
-EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
{
@@ -335,6 +334,20 @@ static void ep93xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
local_irq_restore(flags);
}
+static int ep93xx_gpio_set_debounce(struct gpio_chip *chip,
+ unsigned offset, unsigned debounce)
+{
+ int gpio = chip->base + offset;
+ int irq = gpio_to_irq(gpio);
+
+ if (irq < 0)
+ return -EINVAL;
+
+ ep93xx_gpio_int_debounce(irq, debounce ? true : false);
+
+ return 0;
+}
+
static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
{
struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
@@ -434,6 +447,18 @@ void __init ep93xx_gpio_init(void)
EP93XX_SYSCON_DEVCFG_GONIDE |
EP93XX_SYSCON_DEVCFG_HONIDE);
- for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++)
- gpiochip_add(&ep93xx_gpio_banks[i].chip);
+ for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) {
+ struct gpio_chip *chip = &ep93xx_gpio_banks[i].chip;
+
+ /*
+ * Ports A, B, and F support input debouncing when
+ * used as interrupts.
+ */
+ if (!strcmp(chip->label, "A") ||
+ !strcmp(chip->label, "B") ||
+ !strcmp(chip->label, "F"))
+ chip->set_debounce = ep93xx_gpio_set_debounce;
+
+ gpiochip_add(chip);
+ }
}
diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h
index c991b149bdf..c57152c231f 100644
--- a/arch/arm/mach-ep93xx/include/mach/gpio.h
+++ b/arch/arm/mach-ep93xx/include/mach/gpio.h
@@ -99,8 +99,6 @@
/* maximum value for irq capable line identifiers */
#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7)
-extern void ep93xx_gpio_int_debounce(unsigned int irq, int enable);
-
/* new generic GPIO API - see Documentation/gpio.txt */
#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c
index bc5e83fb581..a921fe92b85 100644
--- a/arch/arm/mach-footbridge/dc21285-timer.c
+++ b/arch/arm/mach-footbridge/dc21285-timer.c
@@ -4,10 +4,11 @@
* Copyright (C) 1998 Russell King.
* Copyright (C) 1998 Phil Blundell
*/
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/spinlock.h>
#include <asm/irq.h>
@@ -16,32 +17,76 @@
#include "common.h"
-/*
- * Footbridge timer 1 support.
- */
-static unsigned long timer1_latch;
+static cycle_t cksrc_dc21285_read(struct clocksource *cs)
+{
+ return cs->mask - *CSR_TIMER2_VALUE;
+}
-static unsigned long timer1_gettimeoffset (void)
+static int cksrc_dc21285_enable(struct clocksource *cs)
{
- unsigned long value = timer1_latch - *CSR_TIMER1_VALUE;
+ *CSR_TIMER2_LOAD = cs->mask;
+ *CSR_TIMER2_CLR = 0;
+ *CSR_TIMER2_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_DIV16;
+ return 0;
+}
- return ((tick_nsec / 1000) * value) / timer1_latch;
+static int cksrc_dc21285_disable(struct clocksource *cs)
+{
+ *CSR_TIMER2_CNTL = 0;
}
-static irqreturn_t
-timer1_interrupt(int irq, void *dev_id)
+static struct clocksource cksrc_dc21285 = {
+ .name = "dc21285_timer2",
+ .rating = 200,
+ .read = cksrc_dc21285_read,
+ .enable = cksrc_dc21285_enable,
+ .disable = cksrc_dc21285_disable,
+ .mask = CLOCKSOURCE_MASK(24),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void ckevt_dc21285_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *c)
{
+ switch (mode) {
+ case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_PERIODIC:
+ *CSR_TIMER1_CLR = 0;
+ *CSR_TIMER1_LOAD = (mem_fclk_21285 + 8 * HZ) / (16 * HZ);
+ *CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD |
+ TIMER_CNTL_DIV16;
+ break;
+
+ default:
+ *CSR_TIMER1_CNTL = 0;
+ break;
+ }
+}
+
+static struct clock_event_device ckevt_dc21285 = {
+ .name = "dc21285_timer1",
+ .features = CLOCK_EVT_FEAT_PERIODIC,
+ .rating = 200,
+ .irq = IRQ_TIMER1,
+ .set_mode = ckevt_dc21285_set_mode,
+};
+
+static irqreturn_t timer1_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *ce = dev_id;
+
*CSR_TIMER1_CLR = 0;
- timer_tick();
+ ce->event_handler(ce);
return IRQ_HANDLED;
}
static struct irqaction footbridge_timer_irq = {
- .name = "Timer1 timer tick",
+ .name = "dc21285_timer1",
.handler = timer1_interrupt,
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .dev_id = &ckevt_dc21285,
};
/*
@@ -49,16 +94,19 @@ static struct irqaction footbridge_timer_irq = {
*/
static void __init footbridge_timer_init(void)
{
- timer1_latch = (mem_fclk_21285 + 8 * HZ) / (16 * HZ);
+ struct clock_event_device *ce = &ckevt_dc21285;
+
+ clocksource_register_hz(&cksrc_dc21285, (mem_fclk_21285 + 8) / 16);
+
+ setup_irq(ce->irq, &footbridge_timer_irq);
- *CSR_TIMER1_CLR = 0;
- *CSR_TIMER1_LOAD = timer1_latch;
- *CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD | TIMER_CNTL_DIV16;
+ clockevents_calc_mult_shift(ce, mem_fclk_21285, 5);
+ ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce);
+ ce->min_delta_ns = clockevent_delta2ns(0x000004, ce);
- setup_irq(IRQ_TIMER1, &footbridge_timer_irq);
+ clockevents_register_device(ce);
}
struct sys_timer footbridge_timer = {
.init = footbridge_timer_init,
- .offset = timer1_gettimeoffset,
};
diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h
index 51dd902043a..b6fdf23ecf6 100644
--- a/arch/arm/mach-footbridge/include/mach/hardware.h
+++ b/arch/arm/mach-footbridge/include/mach/hardware.h
@@ -23,26 +23,33 @@
* 0xf9000000 0x50000000 1MB Cache flush
* 0xf0000000 0x80000000 16MB ISA memory
*/
+
+#ifdef CONFIG_MMU
+#define MMU_IO(a, b) (a)
+#else
+#define MMU_IO(a, b) (b)
+#endif
+
#define XBUS_SIZE 0x00100000
-#define XBUS_BASE 0xff800000
+#define XBUS_BASE MMU_IO(0xff800000, 0x40000000)
#define ARMCSR_SIZE 0x00100000
-#define ARMCSR_BASE 0xfe000000
+#define ARMCSR_BASE MMU_IO(0xfe000000, 0x42000000)
#define WFLUSH_SIZE 0x00100000
-#define WFLUSH_BASE 0xfd000000
+#define WFLUSH_BASE MMU_IO(0xfd000000, 0x78000000)
#define PCIIACK_SIZE 0x00100000
-#define PCIIACK_BASE 0xfc000000
+#define PCIIACK_BASE MMU_IO(0xfc000000, 0x79000000)
#define PCICFG1_SIZE 0x01000000
-#define PCICFG1_BASE 0xfb000000
+#define PCICFG1_BASE MMU_IO(0xfb000000, 0x7a000000)
#define PCICFG0_SIZE 0x01000000
-#define PCICFG0_BASE 0xfa000000
+#define PCICFG0_BASE MMU_IO(0xfa000000, 0x7b000000)
#define PCIMEM_SIZE 0x01000000
-#define PCIMEM_BASE 0xf0000000
+#define PCIMEM_BASE MMU_IO(0xf0000000, 0x80000000)
#define XBUS_LEDS ((volatile unsigned char *)(XBUS_BASE + 0x12000))
#define XBUS_LED_AMBER (1 << 0)
diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h
index 101a4fe90bd..32e4cc397c2 100644
--- a/arch/arm/mach-footbridge/include/mach/io.h
+++ b/arch/arm/mach-footbridge/include/mach/io.h
@@ -14,8 +14,14 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#define PCIO_SIZE 0x00100000
-#define PCIO_BASE 0xff000000
+#ifdef CONFIG_MMU
+#define MMU_IO(a, b) (a)
+#else
+#define MMU_IO(a, b) (b)
+#endif
+
+#define PCIO_SIZE 0x00100000
+#define PCIO_BASE MMU_IO(0xff000000, 0x7c000000)
#define IO_SPACE_LIMIT 0xffff
diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c
index f488fa2082d..441c6ce0d55 100644
--- a/arch/arm/mach-footbridge/isa-timer.c
+++ b/arch/arm/mach-footbridge/isa-timer.c
@@ -4,10 +4,13 @@
* Copyright (C) 1998 Russell King.
* Copyright (C) 1998 Phil Blundell
*/
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/timex.h>
#include <asm/irq.h>
@@ -15,77 +18,115 @@
#include "common.h"
-/*
- * ISA timer tick support
- */
-#define mSEC_10_from_14 ((14318180 + 100) / 200)
+#define PIT_MODE 0x43
+#define PIT_CH0 0x40
+
+#define PIT_LATCH ((PIT_TICK_RATE + HZ / 2) / HZ)
-static unsigned long isa_gettimeoffset(void)
+static cycle_t pit_read(struct clocksource *cs)
{
+ unsigned long flags;
+ static int old_count;
+ static u32 old_jifs;
int count;
+ u32 jifs;
- static int count_p = (mSEC_10_from_14/6); /* for the first call after boot */
- static unsigned long jiffies_p = 0;
+ raw_local_irq_save(flags);
- /*
- * cache volatile jiffies temporarily; we have IRQs turned off.
- */
- unsigned long jiffies_t;
+ jifs = jiffies;
+ outb_p(0x00, PIT_MODE); /* latch the count */
+ count = inb_p(PIT_CH0); /* read the latched count */
+ count |= inb_p(PIT_CH0) << 8;
- /* timer count may underflow right here */
- outb_p(0x00, 0x43); /* latch the count ASAP */
+ if (count > old_count && jifs == old_jifs)
+ count = old_count;
- count = inb_p(0x40); /* read the latched count */
+ old_count = count;
+ old_jifs = jifs;
- /*
- * We do this guaranteed double memory access instead of a _p
- * postfix in the previous port access. Wheee, hackady hack
- */
- jiffies_t = jiffies;
+ raw_local_irq_restore(flags);
- count |= inb_p(0x40) << 8;
+ count = (PIT_LATCH - 1) - count;
- /* Detect timer underflows. If we haven't had a timer tick since
- the last time we were called, and time is apparently going
- backwards, the counter must have wrapped during this routine. */
- if ((jiffies_t == jiffies_p) && (count > count_p))
- count -= (mSEC_10_from_14/6);
- else
- jiffies_p = jiffies_t;
+ return (cycle_t)(jifs * PIT_LATCH) + count;
+}
- count_p = count;
+static struct clocksource pit_cs = {
+ .name = "pit",
+ .rating = 110,
+ .read = pit_read,
+ .mask = CLOCKSOURCE_MASK(32),
+};
- count = (((mSEC_10_from_14/6)-1) - count) * (tick_nsec / 1000);
- count = (count + (mSEC_10_from_14/6)/2) / (mSEC_10_from_14/6);
+static void pit_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ unsigned long flags;
+
+ raw_local_irq_save(flags);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ outb_p(0x34, PIT_MODE);
+ outb_p(PIT_LATCH & 0xff, PIT_CH0);
+ outb_p(PIT_LATCH >> 8, PIT_CH0);
+ break;
+
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ outb_p(0x30, PIT_MODE);
+ outb_p(0, PIT_CH0);
+ outb_p(0, PIT_CH0);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+ local_irq_restore(flags);
+}
- return count;
+static int pit_set_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ return 0;
}
-static irqreturn_t
-isa_timer_interrupt(int irq, void *dev_id)
+static struct clock_event_device pit_ce = {
+ .name = "pit",
+ .features = CLOCK_EVT_FEAT_PERIODIC,
+ .set_mode = pit_set_mode,
+ .set_next_event = pit_set_next_event,
+ .shift = 32,
+};
+
+static irqreturn_t pit_timer_interrupt(int irq, void *dev_id)
{
- timer_tick();
+ struct clock_event_device *ce = dev_id;
+ ce->event_handler(ce);
return IRQ_HANDLED;
}
-static struct irqaction isa_timer_irq = {
- .name = "ISA timer tick",
- .handler = isa_timer_interrupt,
+static struct irqaction pit_timer_irq = {
+ .name = "pit",
+ .handler = pit_timer_interrupt,
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .dev_id = &pit_ce,
};
static void __init isa_timer_init(void)
{
- /* enable PIT timer */
- /* set for periodic (4) and LSB/MSB write (0x30) */
- outb(0x34, 0x43);
- outb((mSEC_10_from_14/6) & 0xFF, 0x40);
- outb((mSEC_10_from_14/6) >> 8, 0x40);
+ pit_ce.cpumask = cpumask_of(smp_processor_id());
+ pit_ce.mult = div_sc(PIT_TICK_RATE, NSEC_PER_SEC, pit_ce.shift);
+ pit_ce.max_delta_ns = clockevent_delta2ns(0x7fff, &pit_ce);
+ pit_ce.min_delta_ns = clockevent_delta2ns(0x000f, &pit_ce);
+
+ clocksource_register_hz(&pit_cs, PIT_TICK_RATE);
- setup_irq(IRQ_ISA_TIMER, &isa_timer_irq);
+ setup_irq(pit_ce.irq, &pit_timer_irq);
+ clockevents_register_device(&pit_ce);
}
struct sys_timer isa_timer = {
.init = isa_timer_init,
- .offset = isa_gettimeoffset,
};
diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c
index 2ba096de003..0cf7a07c3f3 100644
--- a/arch/arm/mach-gemini/board-nas4220b.c
+++ b/arch/arm/mach-gemini/board-nas4220b.c
@@ -98,6 +98,7 @@ static void __init ib4220b_init(void)
platform_register_pflash(SZ_16M, NULL, 0);
platform_device_register(&ib4220b_led_device);
platform_device_register(&ib4220b_key_device);
+ platform_register_rtc();
}
MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c
index a9a0d8b0194..4fa09af9949 100644
--- a/arch/arm/mach-gemini/board-rut1xx.c
+++ b/arch/arm/mach-gemini/board-rut1xx.c
@@ -82,6 +82,7 @@ static void __init rut1xx_init(void)
platform_register_pflash(SZ_8M, NULL, 0);
platform_device_register(&rut1xx_leds);
platform_device_register(&rut1xx_keys_device);
+ platform_register_rtc();
}
MACHINE_START(RUT100, "Teltonika RUT100")
diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c
index 8b88d50d433..af7b68a6b25 100644
--- a/arch/arm/mach-gemini/board-wbd111.c
+++ b/arch/arm/mach-gemini/board-wbd111.c
@@ -130,6 +130,7 @@ static void __init wbd111_init(void)
wbd111_num_partitions);
platform_device_register(&wbd111_leds_device);
platform_device_register(&wbd111_keys_device);
+ platform_register_rtc();
}
MACHINE_START(WBD111, "Wiliboard WBD-111")
diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c
index 1eebcecd1c3..99e5bbecf92 100644
--- a/arch/arm/mach-gemini/board-wbd222.c
+++ b/arch/arm/mach-gemini/board-wbd222.c
@@ -130,6 +130,7 @@ static void __init wbd222_init(void)
wbd222_num_partitions);
platform_device_register(&wbd222_leds_device);
platform_device_register(&wbd222_keys_device);
+ platform_register_rtc();
}
MACHINE_START(WBD222, "Wiliboard WBD-222")
diff --git a/arch/arm/mach-gemini/common.h b/arch/arm/mach-gemini/common.h
index 9392834a214..7670c39acb2 100644
--- a/arch/arm/mach-gemini/common.h
+++ b/arch/arm/mach-gemini/common.h
@@ -18,6 +18,7 @@ extern void gemini_map_io(void);
extern void gemini_init_irq(void);
extern void gemini_timer_init(void);
extern void gemini_gpio_init(void);
+extern void platform_register_rtc(void);
/* Common platform devices registration functions */
extern int platform_register_uart(void);
diff --git a/arch/arm/mach-gemini/devices.c b/arch/arm/mach-gemini/devices.c
index 6b525253d02..5cff29818b7 100644
--- a/arch/arm/mach-gemini/devices.c
+++ b/arch/arm/mach-gemini/devices.c
@@ -90,3 +90,29 @@ int platform_register_pflash(unsigned int size, struct mtd_partition *parts,
return platform_device_register(&pflash_device);
}
+
+static struct resource gemini_rtc_resources[] = {
+ [0] = {
+ .start = GEMINI_RTC_BASE,
+ .end = GEMINI_RTC_BASE + 0x24,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_RTC,
+ .end = IRQ_RTC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device gemini_rtc_device = {
+ .name = "rtc-gemini",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(gemini_rtc_resources),
+ .resource = gemini_rtc_resources,
+};
+
+int __init platform_register_rtc(void)
+{
+ return platform_device_register(&gemini_rtc_device);
+}
+
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index aa76cfd9f34..8382e790207 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -180,7 +180,7 @@ static const uint32_t mx25pdk_keymap[] = {
KEY(3, 3, KEY_POWER),
};
-static const struct matrix_keymap_data mx25pdk_keymap_data __initdata = {
+static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = {
.keymap = mx25pdk_keymap,
.keymap_size = ARRAY_SIZE(mx25pdk_keymap),
};
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 4dc68d6bb6b..9fd894271d5 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -432,7 +432,7 @@ static struct clocksource clocksource_ixp4xx = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-unsigned long ixp4xx_timer_freq = FREQ;
+unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
EXPORT_SYMBOL(ixp4xx_timer_freq);
static void __init ixp4xx_clocksource_init(void)
{
@@ -496,7 +496,7 @@ static struct clock_event_device clockevent_ixp4xx = {
static void __init ixp4xx_clockevent_init(void)
{
- clockevent_ixp4xx.mult = div_sc(FREQ, NSEC_PER_SEC,
+ clockevent_ixp4xx.mult = div_sc(IXP4XX_TIMER_FREQ, NSEC_PER_SEC,
clockevent_ixp4xx.shift);
clockevent_ixp4xx.max_delta_ns =
clockevent_delta2ns(0xfffffffe, &clockevent_ixp4xx);
diff --git a/arch/arm/mach-ixp4xx/include/mach/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h
index 2c3f93c3eb7..c9e930f2933 100644
--- a/arch/arm/mach-ixp4xx/include/mach/timex.h
+++ b/arch/arm/mach-ixp4xx/include/mach/timex.h
@@ -10,6 +10,7 @@
* 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
* timer register ignores the bottom 2 bits of the LATCH value.
*/
-#define FREQ 66666000
-#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
+#define IXP4XX_TIMER_FREQ 66666000
+#define CLOCK_TICK_RATE \
+ (((IXP4XX_TIMER_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
index bfdbe4b5a3c..852f7c9f87d 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
@@ -265,6 +265,11 @@ void qmgr_release_queue(unsigned int queue)
qmgr_queue_descs[queue], queue);
qmgr_queue_descs[queue][0] = '\x0';
#endif
+
+ while ((addr = qmgr_get_entry(queue)))
+ printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n",
+ queue, addr);
+
__raw_writel(0, &qmgr_regs->sram[queue]);
used_sram_bitmap[0] &= ~mask[0];
@@ -275,10 +280,6 @@ void qmgr_release_queue(unsigned int queue)
spin_unlock_irq(&qmgr_lock);
module_put(THIS_MODULE);
-
- while ((addr = qmgr_get_entry(queue)))
- printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n",
- queue, addr);
}
static int qmgr_init(void)
diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c
index b1a362ebfde..ca72a05ed9c 100644
--- a/arch/arm/mach-mxs/clock-mx23.c
+++ b/arch/arm/mach-mxs/clock-mx23.c
@@ -304,7 +304,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \
reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \
reg &= ~BM_CLKCTRL_##dr##_DIV; \
reg |= div << BP_CLKCTRL_##dr##_DIV; \
- if (reg | (1 << clk->enable_shift)) { \
+ if (reg & (1 << clk->enable_shift)) { \
pr_err("%s: clock is gated\n", __func__); \
return -EINVAL; \
} \
@@ -347,7 +347,7 @@ static int name##_set_parent(struct clk *clk, struct clk *parent) \
{ \
if (parent != clk->parent) { \
__raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \
- HW_CLKCTRL_CLKSEQ_TOG); \
+ CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG); \
clk->parent = parent; \
} \
\
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 56312c092a9..fd1c4c54b8e 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -355,12 +355,12 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \
} else { \
reg &= ~BM_CLKCTRL_##dr##_DIV; \
reg |= div << BP_CLKCTRL_##dr##_DIV; \
- if (reg | (1 << clk->enable_shift)) { \
+ if (reg & (1 << clk->enable_shift)) { \
pr_err("%s: clock is gated\n", __func__); \
return -EINVAL; \
} \
} \
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU); \
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \
\
for (i = 10000; i; i--) \
if (!(__raw_readl(CLKCTRL_BASE_ADDR + \
@@ -483,7 +483,7 @@ static int name##_set_parent(struct clk *clk, struct clk *parent) \
{ \
if (parent != clk->parent) { \
__raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \
- HW_CLKCTRL_CLKSEQ_TOG); \
+ CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG); \
clk->parent = parent; \
} \
\
@@ -609,7 +609,6 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("duart", NULL, uart_clk)
_REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk)
_REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk)
- _REGISTER_CLOCK("fec.0", NULL, fec_clk)
_REGISTER_CLOCK("rtc", NULL, rtc_clk)
_REGISTER_CLOCK("pll2", NULL, pll2_clk)
_REGISTER_CLOCK(NULL, "hclk", hbus_clk)
diff --git a/arch/arm/mach-mxs/clock.c b/arch/arm/mach-mxs/clock.c
index e7d2269cf70..a7093c88e6a 100644
--- a/arch/arm/mach-mxs/clock.c
+++ b/arch/arm/mach-mxs/clock.c
@@ -57,7 +57,6 @@ static void __clk_disable(struct clk *clk)
if (clk->disable)
clk->disable(clk);
__clk_disable(clk->parent);
- __clk_disable(clk->secondary);
}
}
@@ -68,7 +67,6 @@ static int __clk_enable(struct clk *clk)
if (clk->usecount++ == 0) {
__clk_enable(clk->parent);
- __clk_enable(clk->secondary);
if (clk->enable)
clk->enable(clk);
diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c
index d7ad7a61366..61991e4dde4 100644
--- a/arch/arm/mach-mxs/gpio.c
+++ b/arch/arm/mach-mxs/gpio.c
@@ -68,29 +68,29 @@ static void set_gpio_irqenable(struct mxs_gpio_port *port, u32 index,
}
}
-static void mxs_gpio_ack_irq(u32 irq)
+static void mxs_gpio_ack_irq(struct irq_data *d)
{
- u32 gpio = irq_to_gpio(irq);
+ u32 gpio = irq_to_gpio(d->irq);
clear_gpio_irqstatus(&mxs_gpio_ports[gpio / 32], gpio & 0x1f);
}
-static void mxs_gpio_mask_irq(u32 irq)
+static void mxs_gpio_mask_irq(struct irq_data *d)
{
- u32 gpio = irq_to_gpio(irq);
+ u32 gpio = irq_to_gpio(d->irq);
set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 0);
}
-static void mxs_gpio_unmask_irq(u32 irq)
+static void mxs_gpio_unmask_irq(struct irq_data *d)
{
- u32 gpio = irq_to_gpio(irq);
+ u32 gpio = irq_to_gpio(d->irq);
set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 1);
}
static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset);
-static int mxs_gpio_set_irq_type(u32 irq, u32 type)
+static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
{
- u32 gpio = irq_to_gpio(irq);
+ u32 gpio = irq_to_gpio(d->irq);
u32 pin_mask = 1 << (gpio & 31);
struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32];
void __iomem *pin_addr;
@@ -139,6 +139,8 @@ static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc)
struct mxs_gpio_port *port = (struct mxs_gpio_port *)get_irq_data(irq);
u32 gpio_irq_no_base = port->virtual_irq_start;
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
+
irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) &
__raw_readl(port->base + PINCTRL_IRQEN(port->id));
@@ -158,9 +160,9 @@ static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc)
* @param enable enable as wake-up if equal to non-zero
* @return This function returns 0 on success.
*/
-static int mxs_gpio_set_wake_irq(u32 irq, u32 enable)
+static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable)
{
- u32 gpio = irq_to_gpio(irq);
+ u32 gpio = irq_to_gpio(d->irq);
u32 gpio_idx = gpio & 0x1f;
struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32];
@@ -180,11 +182,11 @@ static int mxs_gpio_set_wake_irq(u32 irq, u32 enable)
}
static struct irq_chip gpio_irq_chip = {
- .ack = mxs_gpio_ack_irq,
- .mask = mxs_gpio_mask_irq,
- .unmask = mxs_gpio_unmask_irq,
- .set_type = mxs_gpio_set_irq_type,
- .set_wake = mxs_gpio_set_wake_irq,
+ .irq_ack = mxs_gpio_ack_irq,
+ .irq_mask = mxs_gpio_mask_irq,
+ .irq_unmask = mxs_gpio_unmask_irq,
+ .irq_set_type = mxs_gpio_set_irq_type,
+ .irq_set_wake = mxs_gpio_set_wake_irq,
};
static void mxs_set_gpio_direction(struct gpio_chip *chip, unsigned offset,
diff --git a/arch/arm/mach-mxs/icoll.c b/arch/arm/mach-mxs/icoll.c
index 5dd43ba7005..0f4c120fc16 100644
--- a/arch/arm/mach-mxs/icoll.c
+++ b/arch/arm/mach-mxs/icoll.c
@@ -34,7 +34,7 @@
static void __iomem *icoll_base = MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR);
-static void icoll_ack_irq(unsigned int irq)
+static void icoll_ack_irq(struct irq_data *d)
{
/*
* The Interrupt Collector is able to prioritize irqs.
@@ -45,22 +45,22 @@ static void icoll_ack_irq(unsigned int irq)
icoll_base + HW_ICOLL_LEVELACK);
}
-static void icoll_mask_irq(unsigned int irq)
+static void icoll_mask_irq(struct irq_data *d)
{
__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
- icoll_base + HW_ICOLL_INTERRUPTn_CLR(irq));
+ icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->irq));
}
-static void icoll_unmask_irq(unsigned int irq)
+static void icoll_unmask_irq(struct irq_data *d)
{
__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
- icoll_base + HW_ICOLL_INTERRUPTn_SET(irq));
+ icoll_base + HW_ICOLL_INTERRUPTn_SET(d->irq));
}
static struct irq_chip mxs_icoll_chip = {
- .ack = icoll_ack_irq,
- .mask = icoll_mask_irq,
- .unmask = icoll_unmask_irq,
+ .irq_ack = icoll_ack_irq,
+ .irq_mask = icoll_mask_irq,
+ .irq_unmask = icoll_unmask_irq,
};
void __init icoll_init_irq(void)
diff --git a/arch/arm/mach-mxs/include/mach/clock.h b/arch/arm/mach-mxs/include/mach/clock.h
index 041e276d8a3..592c9ab5d76 100644
--- a/arch/arm/mach-mxs/include/mach/clock.h
+++ b/arch/arm/mach-mxs/include/mach/clock.h
@@ -29,8 +29,6 @@ struct clk {
int id;
/* Source clock this clk depends on */
struct clk *parent;
- /* Secondary clock to enable/disable with this clock */
- struct clk *secondary;
/* Reference count of clock enable/disable */
__s8 usecount;
/* Register bit position for clock's enable/disable control. */
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
index c9088d85da0..453809359ba 100644
--- a/arch/arm/mach-omap1/lcd_dma.c
+++ b/arch/arm/mach-omap1/lcd_dma.c
@@ -37,7 +37,7 @@ int omap_lcd_dma_running(void)
* On OMAP1510, internal LCD controller will start the transfer
* when it gets enabled, so assume DMA running if LCD enabled.
*/
- if (cpu_is_omap1510())
+ if (cpu_is_omap15xx())
if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN)
return 1;
@@ -95,7 +95,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
void omap_set_lcd_dma_b1_rotation(int rotate)
{
- if (cpu_is_omap1510()) {
+ if (cpu_is_omap15xx()) {
printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
BUG();
return;
@@ -106,7 +106,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
void omap_set_lcd_dma_b1_mirror(int mirror)
{
- if (cpu_is_omap1510()) {
+ if (cpu_is_omap15xx()) {
printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
BUG();
}
@@ -116,7 +116,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
{
- if (cpu_is_omap1510()) {
+ if (cpu_is_omap15xx()) {
printk(KERN_ERR "DMA virtual resulotion is not supported "
"in 1510 mode\n");
BUG();
@@ -127,7 +127,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
{
- if (cpu_is_omap1510()) {
+ if (cpu_is_omap15xx()) {
printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
BUG();
}
@@ -177,7 +177,7 @@ static void set_b1_regs(void)
bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
/* 1510 DMA requires the bottom address to be 2 more
* than the actual last memory access location. */
- if (cpu_is_omap1510() &&
+ if (cpu_is_omap15xx() &&
lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
bottom += 2;
ei = PIXSTEP(0, 0, 1, 0);
@@ -241,7 +241,7 @@ static void set_b1_regs(void)
return; /* Suppress warning about uninitialized vars */
}
- if (cpu_is_omap1510()) {
+ if (cpu_is_omap15xx()) {
omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
@@ -343,7 +343,7 @@ void omap_free_lcd_dma(void)
BUG();
return;
}
- if (!cpu_is_omap1510())
+ if (!cpu_is_omap15xx())
omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
OMAP1610_DMA_LCD_CCR);
lcd_dma.reserved = 0;
@@ -360,7 +360,7 @@ void omap_enable_lcd_dma(void)
* connected. Otherwise the OMAP internal controller will
* start the transfer when it gets enabled.
*/
- if (cpu_is_omap1510() || !lcd_dma.ext_ctrl)
+ if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
return;
w = omap_readw(OMAP1610_DMA_LCD_CTRL);
@@ -378,14 +378,14 @@ EXPORT_SYMBOL(omap_enable_lcd_dma);
void omap_setup_lcd_dma(void)
{
BUG_ON(lcd_dma.active);
- if (!cpu_is_omap1510()) {
+ if (!cpu_is_omap15xx()) {
/* Set some reasonable defaults */
omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
}
set_b1_regs();
- if (!cpu_is_omap1510()) {
+ if (!cpu_is_omap15xx()) {
u16 w;
w = omap_readw(OMAP1610_DMA_LCD_CCR);
@@ -407,7 +407,7 @@ void omap_stop_lcd_dma(void)
u16 w;
lcd_dma.active = 0;
- if (cpu_is_omap1510() || !lcd_dma.ext_ctrl)
+ if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
return;
w = omap_readw(OMAP1610_DMA_LCD_CCR);
diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h
index 56a647986ae..cd926dcb5e7 100644
--- a/arch/arm/mach-omap1/pm.h
+++ b/arch/arm/mach-omap1/pm.h
@@ -123,9 +123,9 @@ extern void allow_idle_sleep(void);
extern void omap1_pm_idle(void);
extern void omap1_pm_suspend(void);
-extern void omap7xx_cpu_suspend(unsigned short, unsigned short);
-extern void omap1510_cpu_suspend(unsigned short, unsigned short);
-extern void omap1610_cpu_suspend(unsigned short, unsigned short);
+extern void omap7xx_cpu_suspend(unsigned long, unsigned long);
+extern void omap1510_cpu_suspend(unsigned long, unsigned long);
+extern void omap1610_cpu_suspend(unsigned long, unsigned long);
extern void omap7xx_idle_loop_suspend(void);
extern void omap1510_idle_loop_suspend(void);
extern void omap1610_idle_loop_suspend(void);
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index ef771ce8b03..c875bdc902c 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -58,6 +58,7 @@
*/
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ .align 3
ENTRY(omap7xx_cpu_suspend)
@ save registers on stack
@@ -137,6 +138,7 @@ ENTRY(omap7xx_cpu_suspend_sz)
#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
#ifdef CONFIG_ARCH_OMAP15XX
+ .align 3
ENTRY(omap1510_cpu_suspend)
@ save registers on stack
@@ -211,6 +213,7 @@ ENTRY(omap1510_cpu_suspend_sz)
#endif /* CONFIG_ARCH_OMAP15XX */
#if defined(CONFIG_ARCH_OMAP16XX)
+ .align 3
ENTRY(omap1610_cpu_suspend)
@ save registers on stack
diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S
index 7724e520d07..692587d07ea 100644
--- a/arch/arm/mach-omap1/sram.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -18,6 +18,7 @@
/*
* Reprograms ULPD and CKCTL.
*/
+ .align 3
ENTRY(omap1_sram_reprogram_clock)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index f83fc335c61..6885d2fac18 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -44,7 +44,6 @@
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/io.h>
-#include <linux/sched.h>
#include <asm/system.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 1a2cf6226a5..b69fa0a0299 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -45,6 +45,7 @@ config ARCH_OMAP4
select CPU_V7
select ARM_GIC
select PL310_ERRATA_588369
+ select PL310_ERRATA_727915
select ARM_ERRATA_720789
select ARCH_HAS_OPP
select PM_OPP if PM
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index e906e05bb41..9a2a31e011c 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -115,9 +115,6 @@ static struct omap2_hsmmc_info mmc[] = {
static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
{
- twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1);
- twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
-
if (gpio_is_valid(dssdev->reset_gpio))
gpio_set_value_cansleep(dssdev->reset_gpio, 1);
return 0;
@@ -247,6 +244,8 @@ static struct gpio_led gpio_leds[];
static int devkit8000_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
+ int ret;
+
omap_mux_init_gpio(29, OMAP_PIN_INPUT);
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
@@ -255,17 +254,23 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
- /* gpio + 1 is "LCD_PWREN" (out, active high) */
- devkit8000_lcd_device.reset_gpio = gpio + 1;
- gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN");
- /* Disable until needed */
- gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0);
+ /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
+ devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0;
+ ret = gpio_request_one(devkit8000_lcd_device.reset_gpio,
+ GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN");
+ if (ret < 0) {
+ devkit8000_lcd_device.reset_gpio = -EINVAL;
+ printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n");
+ }
/* gpio + 7 is "DVI_PD" (out, active low) */
devkit8000_dvi_device.reset_gpio = gpio + 7;
- gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown");
- /* Disable until needed */
- gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0);
+ ret = gpio_request_one(devkit8000_dvi_device.reset_gpio,
+ GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown");
+ if (ret < 0) {
+ devkit8000_dvi_device.reset_gpio = -EINVAL;
+ printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n");
+ }
return 0;
}
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index e001a048dc0..e944025d5ef 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -409,8 +409,6 @@ static void __init omap4_panda_init(void)
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
omap_serial_init();
omap4_twl6030_hsmmc_init(mmc);
- /* OMAP4 Panda uses internal transceiver so register nop transceiver */
- usb_nop_xceiv_register();
omap4_ehci_init();
usb_musb_init(&musb_board_data);
}
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index cb77be7ac44..39a71bb8a30 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -40,9 +40,6 @@ static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
static struct regulator_init_data rm680_vemmc = {
.constraints = {
.name = "rm680_vemmc",
- .min_uV = 2900000,
- .max_uV = 2900000,
- .apply_uV = 1,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_STATUS
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index 337392c3f54..acb7ae5b0a2 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -77,7 +77,7 @@ static int _dpll_test_fint(struct clk *clk, u8 n)
dd = clk->dpll_data;
/* DPLL divider must result in a valid jitter correction val */
- fint = clk->parent->rate / (n + 1);
+ fint = clk->parent->rate / n;
if (fint < DPLL_FINT_BAND1_MIN) {
pr_debug("rejecting n=%d due to Fint failure, "
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 394413dc7de..24b88504df0 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -193,10 +193,12 @@ static void omap2_mbox_disable_irq(struct omap_mbox *mbox,
omap_mbox_type_t irq)
{
struct omap_mbox2_priv *p = mbox->priv;
- u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
- l = mbox_read_reg(p->irqdisable);
- l &= ~bit;
- mbox_write_reg(l, p->irqdisable);
+ u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
+
+ if (!cpu_is_omap44xx())
+ bit = mbox_read_reg(p->irqdisable) & ~bit;
+
+ mbox_write_reg(bit, p->irqdisable);
}
static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
@@ -334,7 +336,7 @@ static struct omap_mbox mbox_iva_info = {
.priv = &omap2_mbox_iva_priv,
};
-struct omap_mbox *omap2_mboxes[] = { &mbox_iva_info, &mbox_dsp_info, NULL };
+struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL };
#endif
#if defined(CONFIG_ARCH_OMAP4)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index fae49d12bc7..6c84659cf84 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -605,7 +605,7 @@ static void __init omap_mux_dbg_create_entry(
list_for_each_entry(e, &partition->muxmodes, node) {
struct omap_mux *m = &e->mux;
- (void)debugfs_create_file(m->muxnames[0], S_IWUGO, mux_dbg_dir,
+ (void)debugfs_create_file(m->muxnames[0], S_IWUSR, mux_dbg_dir,
m, &omap_mux_dbg_signal_fops);
}
}
@@ -1000,6 +1000,7 @@ int __init omap_mux_init(const char *name, u32 flags,
if (!partition->base) {
pr_err("%s: Could not ioremap mux partition at 0x%08x\n",
__func__, partition->phys);
+ kfree(partition);
return -ENODEV;
}
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 19268647ce3..9ef8c29dd81 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -52,6 +52,12 @@ static void omap4_l2x0_disable(void)
omap_smc1(0x102, 0x0);
}
+static void omap4_l2x0_set_debug(unsigned long val)
+{
+ /* Program PL310 L2 Cache controller debug register */
+ omap_smc1(0x100, val);
+}
+
static int __init omap_l2_cache_init(void)
{
u32 aux_ctrl = 0;
@@ -99,6 +105,7 @@ static int __init omap_l2_cache_init(void)
* specific one
*/
outer_cache.disable = omap4_l2x0_disable;
+ outer_cache.set_debug = omap4_l2x0_set_debug;
return 0;
}
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 125f56591fb..a5a83b358dd 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -637,14 +637,14 @@ static int __init pm_dbg_init(void)
}
- (void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUGO, d,
+ (void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUSR, d,
&enable_off_mode, &pm_dbg_option_fops);
- (void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUGO, d,
+ (void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUSR, d,
&sleep_while_idle, &pm_dbg_option_fops);
- (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUGO, d,
+ (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUSR, d,
&wakeup_timer_seconds, &pm_dbg_option_fops);
(void) debugfs_create_file("wakeup_timer_milliseconds",
- S_IRUGO | S_IWUGO, d, &wakeup_timer_milliseconds,
+ S_IRUGO | S_IWUSR, d, &wakeup_timer_milliseconds,
&pm_dbg_option_fops);
pm_dbg_init_done = 1;
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 1c1b0ab5b97..39580e6060e 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -92,7 +92,7 @@ extern void omap24xx_idle_loop_suspend(void);
extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
void __iomem *sdrc_power);
extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
-extern void save_secure_ram_context(u32 *addr);
+extern int save_secure_ram_context(u32 *addr);
extern void omap3_save_scratchpad_contents(void);
extern unsigned int omap24xx_idle_loop_suspend_sz;
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index a4aa1920a75..2f864e4b085 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -168,9 +168,10 @@ static void omap3_core_restore_context(void)
* once during boot sequence, but this works as we are not using secure
* services.
*/
-static void omap3_save_secure_ram_context(u32 target_mpu_state)
+static void omap3_save_secure_ram_context(void)
{
u32 ret;
+ int mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
/*
@@ -181,7 +182,7 @@ static void omap3_save_secure_ram_context(u32 target_mpu_state)
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
ret = _omap_save_secure_sram((u32 *)
__pa(omap3_secure_ram_storage));
- pwrdm_set_next_pwrst(mpu_pwrdm, target_mpu_state);
+ pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
/* Following is for error tracking, it should not happen */
if (ret) {
printk(KERN_ERR "save_secure_sram() returns %08x\n",
@@ -1094,7 +1095,7 @@ static int __init omap3_pm_init(void)
local_fiq_disable();
omap_dma_global_context_save();
- omap3_save_secure_ram_context(PWRDM_POWER_ON);
+ omap3_save_secure_ram_context();
omap_dma_global_context_restore();
local_irq_enable();
diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.h b/arch/arm/mach-omap2/prcm_mpu44xx.h
index 729a644ce85..3300ff6e3cf 100644
--- a/arch/arm/mach-omap2/prcm_mpu44xx.h
+++ b/arch/arm/mach-omap2/prcm_mpu44xx.h
@@ -38,8 +38,8 @@
#define OMAP4430_PRCM_MPU_CPU1_INST 0x0800
/* PRCM_MPU clockdomain register offsets (from instance start) */
-#define OMAP4430_PRCM_MPU_CPU0_MPU_CDOFFS 0x0000
-#define OMAP4430_PRCM_MPU_CPU1_MPU_CDOFFS 0x0000
+#define OMAP4430_PRCM_MPU_CPU0_MPU_CDOFFS 0x0018
+#define OMAP4430_PRCM_MPU_CPU1_MPU_CDOFFS 0x0018
/*
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
index c7780cc8d91..b5071a47ec3 100644
--- a/arch/arm/mach-omap2/sleep24xx.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -47,6 +47,7 @@
* Note: This code get's copied to internal SRAM at boot. When the OMAP
* wakes up it continues execution at the point it went to sleep.
*/
+ .align 3
ENTRY(omap24xx_idle_loop_suspend)
stmfd sp!, {r0, lr} @ save registers on stack
mov r0, #0 @ clear for mcr setup
@@ -82,6 +83,7 @@ ENTRY(omap24xx_idle_loop_suspend_sz)
* The DLL load value is not kept in RETENTION or OFF. It needs to be restored
* at wake
*/
+ .align 3
ENTRY(omap24xx_cpu_suspend)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
mov r3, #0x0 @ clear for mcr call
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 98d8232808b..951a0be66cf 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -118,6 +118,7 @@ ENTRY(enable_omap3630_toggle_l2_on_restore)
.text
/* Function to call rom code to save secure ram context */
+ .align 3
ENTRY(save_secure_ram_context)
stmfd sp!, {r1-r12, lr} @ save registers on stack
adr r3, api_params @ r3 points to parameters
@@ -169,6 +170,7 @@ ENTRY(save_secure_ram_context_sz)
* depending on the low power mode (non-OFF vs OFF modes),
* cf. 'Resume path for xxx mode' comments.
*/
+ .align 3
ENTRY(omap34xx_cpu_suspend)
stmfd sp!, {r0-r12, lr} @ save registers on stack
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 77ecebf3fae..1a777e34d0c 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -282,6 +282,7 @@ error:
dev_err(&sr_info->pdev->dev, "%s: ERROR in registering"
"interrupt handler. Smartreflex will"
"not function as desired\n", __func__);
+ kfree(name);
kfree(sr_info);
return ret;
}
@@ -780,8 +781,7 @@ static int omap_sr_autocomp_show(void *data, u64 *val)
struct omap_sr *sr_info = (struct omap_sr *) data;
if (!sr_info) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, sr_info->voltdm->name);
+ pr_warning("%s: omap_sr struct not found\n", __func__);
return -EINVAL;
}
@@ -795,8 +795,7 @@ static int omap_sr_autocomp_store(void *data, u64 val)
struct omap_sr *sr_info = (struct omap_sr *) data;
if (!sr_info) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, sr_info->voltdm->name);
+ pr_warning("%s: omap_sr struct not found\n", __func__);
return -EINVAL;
}
@@ -834,7 +833,8 @@ static int __init omap_sr_probe(struct platform_device *pdev)
if (!pdata) {
dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
- return -EINVAL;
+ ret = -EINVAL;
+ goto err_free_devinfo;
}
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -880,7 +880,7 @@ static int __init omap_sr_probe(struct platform_device *pdev)
ret = sr_late_init(sr_info);
if (ret) {
pr_warning("%s: Error in SR late init\n", __func__);
- return ret;
+ goto err_release_region;
}
}
@@ -891,17 +891,20 @@ static int __init omap_sr_probe(struct platform_device *pdev)
* not try to create rest of the debugfs entries.
*/
vdd_dbg_dir = omap_voltage_get_dbgdir(sr_info->voltdm);
- if (!vdd_dbg_dir)
- return -EINVAL;
+ if (!vdd_dbg_dir) {
+ ret = -EINVAL;
+ goto err_release_region;
+ }
dbg_dir = debugfs_create_dir("smartreflex", vdd_dbg_dir);
if (IS_ERR(dbg_dir)) {
dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
__func__);
- return PTR_ERR(dbg_dir);
+ ret = PTR_ERR(dbg_dir);
+ goto err_release_region;
}
- (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUGO, dbg_dir,
+ (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR, dbg_dir,
(void *)sr_info, &pm_sr_fops);
(void) debugfs_create_x32("errweight", S_IRUGO, dbg_dir,
&sr_info->err_weight);
@@ -914,7 +917,8 @@ static int __init omap_sr_probe(struct platform_device *pdev)
if (IS_ERR(nvalue_dir)) {
dev_err(&pdev->dev, "%s: Unable to create debugfs directory"
"for n-values\n", __func__);
- return PTR_ERR(nvalue_dir);
+ ret = PTR_ERR(nvalue_dir);
+ goto err_release_region;
}
omap_voltage_get_volttable(sr_info->voltdm, &volt_data);
@@ -923,24 +927,16 @@ static int __init omap_sr_probe(struct platform_device *pdev)
" corresponding vdd vdd_%s. Cannot create debugfs"
"entries for n-values\n",
__func__, sr_info->voltdm->name);
- return -ENODATA;
+ ret = -ENODATA;
+ goto err_release_region;
}
for (i = 0; i < sr_info->nvalue_count; i++) {
- char *name;
- char volt_name[32];
-
- name = kzalloc(NVALUE_NAME_LEN + 1, GFP_KERNEL);
- if (!name) {
- dev_err(&pdev->dev, "%s: Unable to allocate memory"
- " for n-value directory name\n", __func__);
- return -ENOMEM;
- }
+ char name[NVALUE_NAME_LEN + 1];
- strcpy(name, "volt_");
- sprintf(volt_name, "%d", volt_data[i].volt_nominal);
- strcat(name, volt_name);
- (void) debugfs_create_x32(name, S_IRUGO | S_IWUGO, nvalue_dir,
+ snprintf(name, sizeof(name), "volt_%d",
+ volt_data[i].volt_nominal);
+ (void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
&(sr_info->nvalue_table[i].nvalue));
}
@@ -966,7 +962,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev)
}
sr_info = _sr_lookup(pdata->voltdm);
- if (!sr_info) {
+ if (IS_ERR(sr_info)) {
dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
__func__);
return -EINVAL;
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index 055310cc77d..ff9b9dbcb30 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -39,6 +39,7 @@
.text
+ .align 3
ENTRY(omap242x_sram_ddr_init)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
@@ -143,6 +144,7 @@ ENTRY(omap242x_sram_ddr_init_sz)
* r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
* PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
*/
+ .align 3
ENTRY(omap242x_sram_reprogram_sdrc)
stmfd sp!, {r0 - r10, lr} @ save registers on stack
mov r3, #0x0 @ clear for mrc call
@@ -238,6 +240,7 @@ ENTRY(omap242x_sram_reprogram_sdrc_sz)
/*
* Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
*/
+ .align 3
ENTRY(omap242x_sram_set_prcm)
stmfd sp!, {r0-r12, lr} @ regs to stack
adr r4, pbegin @ addr of preload start
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index f9007580aea..76730209fa0 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -39,6 +39,7 @@
.text
+ .align 3
ENTRY(omap243x_sram_ddr_init)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
@@ -143,6 +144,7 @@ ENTRY(omap243x_sram_ddr_init_sz)
* r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
* PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
*/
+ .align 3
ENTRY(omap243x_sram_reprogram_sdrc)
stmfd sp!, {r0 - r10, lr} @ save registers on stack
mov r3, #0x0 @ clear for mrc call
@@ -238,6 +240,7 @@ ENTRY(omap243x_sram_reprogram_sdrc_sz)
/*
* Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
*/
+ .align 3
ENTRY(omap243x_sram_set_prcm)
stmfd sp!, {r0-r12, lr} @ regs to stack
adr r4, pbegin @ addr of preload start
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 7f893a29d50..25011ca2145 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -111,6 +111,7 @@
* since it will cause the ARM MMU to attempt to walk the page tables.
* These crashes may be intermittent.
*/
+ .align 3
ENTRY(omap3_sram_configure_core_dpll)
stmfd sp!, {r1-r12, lr} @ store regs to stack
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 7b7c2683ae7..0fc550e7e48 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -39,6 +39,7 @@
#include <asm/mach/time.h>
#include <plat/dmtimer.h>
#include <asm/localtimer.h>
+#include <asm/sched_clock.h>
#include "timer-gp.h"
@@ -190,6 +191,7 @@ static void __init omap2_gp_clocksource_init(void)
/*
* clocksource
*/
+static DEFINE_CLOCK_DATA(cd);
static struct omap_dm_timer *gpt_clocksource;
static cycle_t clocksource_read_cycles(struct clocksource *cs)
{
@@ -204,6 +206,15 @@ static struct clocksource clocksource_gpt = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
+static void notrace dmtimer_update_sched_clock(void)
+{
+ u32 cyc;
+
+ cyc = omap_dm_timer_read_counter(gpt_clocksource);
+
+ update_sched_clock(&cd, cyc, (u32)~0);
+}
+
/* Setup free-running counter for clocksource */
static void __init omap2_gp_clocksource_init(void)
{
@@ -224,6 +235,8 @@ static void __init omap2_gp_clocksource_init(void)
omap_dm_timer_set_load_start(gpt, 1, 0);
+ init_sched_clock(&cd, dmtimer_update_sched_clock, 32, tick_rate);
+
if (clocksource_register_hz(&clocksource_gpt, tick_rate))
printk(err2, clocksource_gpt.name);
}
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index ed6079c94c5..12be525b8df 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -471,6 +471,7 @@ static void __init vdd_debugfs_init(struct omap_vdd_info *vdd)
strcat(name, vdd->voltdm.name);
vdd->debug_dir = debugfs_create_dir(name, voltage_dir);
+ kfree(name);
if (IS_ERR(vdd->debug_dir)) {
pr_warning("%s: Unable to create debugfs directory for"
" vdd_%s\n", __func__, vdd->voltdm.name);
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
index 6b2c800a113..28f667e52ef 100644
--- a/arch/arm/mach-pxa/colibri-evalboard.c
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -50,7 +50,7 @@ static void __init colibri_mmc_init(void)
GPIO0_COLIBRI_PXA270_SD_DETECT;
if (machine_is_colibri300()) /* PXA300 Colibri */
colibri_mci_platform_data.gpio_card_detect =
- GPIO39_COLIBRI_PXA300_SD_DETECT;
+ GPIO13_COLIBRI_PXA300_SD_DETECT;
else /* PXA320 Colibri */
colibri_mci_platform_data.gpio_card_detect =
GPIO28_COLIBRI_PXA320_SD_DETECT;
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index fddb16d07eb..66dd81cbc8a 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -41,7 +41,7 @@ static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {
GPIO4_MMC1_DAT1,
GPIO5_MMC1_DAT2,
GPIO6_MMC1_DAT3,
- GPIO39_GPIO, /* SD detect */
+ GPIO13_GPIO, /* GPIO13_COLIBRI_PXA300_SD_DETECT */
/* UHC */
GPIO0_2_USBH_PEN,
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 388a96f1ef9..cb4236e98a0 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -60,7 +60,7 @@ static inline void colibri_pxa3xx_init_nand(void) {}
#define GPIO113_COLIBRI_PXA270_TS_IRQ 113
/* GPIO definitions for Colibri PXA300/310 */
-#define GPIO39_COLIBRI_PXA300_SD_DETECT 39
+#define GPIO13_COLIBRI_PXA300_SD_DETECT 13
/* GPIO definitions for Colibri PXA320 */
#define GPIO28_COLIBRI_PXA320_SD_DETECT 28
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
index fd8360c6839..f15afe01299 100644
--- a/arch/arm/mach-pxa/include/mach/pm.h
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -22,9 +22,8 @@ struct pxa_cpu_pm_fns {
extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
/* sleep.S */
-extern void pxa25x_cpu_suspend(unsigned int);
-extern void pxa27x_cpu_suspend(unsigned int);
-extern void pxa_cpu_resume(void);
+extern void pxa25x_cpu_suspend(unsigned int, long);
+extern void pxa27x_cpu_suspend(unsigned int, long);
extern int pxa_pm_enter(suspend_state_t state);
extern int pxa_pm_prepare(void);
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 405b92a2979..35572c427fa 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -323,7 +323,7 @@ static struct platform_pwm_backlight_data palm27x_backlight_data = {
.pwm_id = 0,
.max_brightness = 0xfe,
.dft_brightness = 0x7e,
- .pwm_period_ns = 3500,
+ .pwm_period_ns = 3500 * 1024,
.init = palm27x_backlight_init,
.notify = palm27x_backlight_notify,
.exit = palm27x_backlight_exit,
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 7bf4017326e..3010193b081 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -212,7 +212,7 @@ static unsigned long store_ptr;
static int palmz72_pm_suspend(struct sys_device *dev, pm_message_t msg)
{
/* setup the resume_info struct for the original bootloader */
- palmz72_resume_info.resume_addr = (u32) pxa_cpu_resume;
+ palmz72_resume_info.resume_addr = (u32) cpu_resume;
/* Storing memory touched by ROM */
store_ptr = *PALMZ72_SAVE_DWORD;
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 978e1b28954..51e1583265b 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -33,7 +33,7 @@ int pxa_pm_enter(suspend_state_t state)
#endif
/* skip registers saving for standby */
- if (state != PM_SUSPEND_STANDBY) {
+ if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->save) {
pxa_cpu_pm_fns->save(sleep_save);
/* before sleeping, calculate and save a checksum */
for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
@@ -44,7 +44,7 @@ int pxa_pm_enter(suspend_state_t state)
pxa_cpu_pm_fns->enter(state);
cpu_init();
- if (state != PM_SUSPEND_STANDBY) {
+ if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->restore) {
/* after sleeping, validate the checksum */
for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
checksum += sleep_save[i];
@@ -67,11 +67,6 @@ int pxa_pm_enter(suspend_state_t state)
EXPORT_SYMBOL_GPL(pxa_pm_enter);
-unsigned long sleep_phys_sp(void *sp)
-{
- return virt_to_phys(sp);
-}
-
static int pxa_pm_valid(suspend_state_t state)
{
if (pxa_cpu_pm_fns)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index fbc5b775f89..6bde5956358 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -244,7 +244,7 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state)
switch (state) {
case PM_SUSPEND_MEM:
- pxa25x_cpu_suspend(PWRMODE_SLEEP);
+ pxa25x_cpu_suspend(PWRMODE_SLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET);
break;
}
}
@@ -252,7 +252,7 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state)
static int pxa25x_cpu_pm_prepare(void)
{
/* set resume return address */
- PSPR = virt_to_phys(pxa_cpu_resume);
+ PSPR = virt_to_phys(cpu_resume);
return 0;
}
@@ -347,6 +347,7 @@ static struct platform_device *pxa25x_devices[] __initdata = {
&pxa25x_device_assp,
&pxa25x_device_pwm0,
&pxa25x_device_pwm1,
+ &pxa_device_asoc_platform,
};
static struct sys_device pxa25x_sysdev[] = {
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 987301ff4c3..28b11be00b3 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -300,7 +300,7 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
pxa_cpu_standby();
break;
case PM_SUSPEND_MEM:
- pxa27x_cpu_suspend(pwrmode);
+ pxa27x_cpu_suspend(pwrmode, PLAT_PHYS_OFFSET - PAGE_OFFSET);
break;
}
}
@@ -313,7 +313,7 @@ static int pxa27x_cpu_pm_valid(suspend_state_t state)
static int pxa27x_cpu_pm_prepare(void)
{
/* set resume return address */
- PSPR = virt_to_phys(pxa_cpu_resume);
+ PSPR = virt_to_phys(cpu_resume);
return 0;
}
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index a7a19e1cd64..1230343d9c7 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -142,8 +142,7 @@ static void pxa3xx_cpu_pm_suspend(void)
volatile unsigned long *p = (volatile void *)0xc0000000;
unsigned long saved_data = *p;
- extern void pxa3xx_cpu_suspend(void);
- extern void pxa3xx_cpu_resume(void);
+ extern void pxa3xx_cpu_suspend(long);
/* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
@@ -161,9 +160,9 @@ static void pxa3xx_cpu_pm_suspend(void)
PSPR = 0x5c014000;
/* overwrite with the resume address */
- *p = virt_to_phys(pxa3xx_cpu_resume);
+ *p = virt_to_phys(cpu_resume);
- pxa3xx_cpu_suspend();
+ pxa3xx_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET);
*p = saved_data;
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index c551da86baf..6f5368899d8 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -22,133 +22,26 @@
.text
-pxa_cpu_save_cp:
- @ get coprocessor registers
- mrc p14, 0, r3, c6, c0, 0 @ clock configuration, for turbo mode
- mrc p15, 0, r4, c15, c1, 0 @ CP access reg
- mrc p15, 0, r5, c13, c0, 0 @ PID
- mrc p15, 0, r6, c3, c0, 0 @ domain ID
- mrc p15, 0, r7, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r8, c1, c1, 0 @ auxiliary control reg
- mrc p15, 0, r9, c1, c0, 0 @ control reg
-
- bic r3, r3, #2 @ clear frequency change bit
-
- @ store them plus current virtual stack ptr on stack
- mov r10, sp
- stmfd sp!, {r3 - r10}
-
- mov pc, lr
-
-pxa_cpu_save_sp:
- @ preserve phys address of stack
- mov r0, sp
- str lr, [sp, #-4]!
- bl sleep_phys_sp
- ldr r1, =sleep_save_sp
- str r0, [r1]
- ldr pc, [sp], #4
-
#ifdef CONFIG_PXA3xx
/*
* pxa3xx_cpu_suspend() - forces CPU into sleep state (S2D3C4)
*
- * NOTE: unfortunately, pxa_cpu_save_cp can not be reused here since
- * the auxiliary control register address is different between pxa3xx
- * and pxa{25x,27x}
+ * r0 = v:p offset
*/
-
ENTRY(pxa3xx_cpu_suspend)
#ifndef CONFIG_IWMMXT
mra r2, r3, acc0
#endif
stmfd sp!, {r2 - r12, lr} @ save registers on stack
-
- mrc p14, 0, r3, c6, c0, 0 @ clock configuration, for turbo mode
- mrc p15, 0, r4, c15, c1, 0 @ CP access reg
- mrc p15, 0, r5, c13, c0, 0 @ PID
- mrc p15, 0, r6, c3, c0, 0 @ domain ID
- mrc p15, 0, r7, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg
- mrc p15, 0, r9, c1, c0, 0 @ control reg
-
- bic r3, r3, #2 @ clear frequency change bit
-
- @ store them plus current virtual stack ptr on stack
- mov r10, sp
- stmfd sp!, {r3 - r10}
-
- @ store physical address of stack pointer
- mov r0, sp
- bl sleep_phys_sp
- ldr r1, =sleep_save_sp
- str r0, [r1]
-
- @ clean data cache
- bl xsc3_flush_kern_cache_all
+ mov r1, r0
+ ldr r3, =pxa_cpu_resume @ resume function
+ bl cpu_suspend
mov r0, #0x06 @ S2D3C4 mode
mcr p14, 0, r0, c7, c0, 0 @ enter sleep
20: b 20b @ waiting for sleep
-
- .data
- .align 5
-/*
- * pxa3xx_cpu_resume
- */
-
-ENTRY(pxa3xx_cpu_resume)
-
- mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off
- msr cpsr_c, r0
-
- ldr r0, sleep_save_sp @ stack phys addr
- ldmfd r0, {r3 - r9, sp} @ CP regs + virt stack ptr
-
- mov r1, #0
- mcr p15, 0, r1, c7, c7, 0 @ invalidate I & D caches, BTB
- mcr p15, 0, r1, c7, c10, 4 @ drain write (&fill) buffer
- mcr p15, 0, r1, c7, c5, 4 @ flush prefetch buffer
- mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
-
- mcr p14, 0, r3, c6, c0, 0 @ clock configuration, turbo mode.
- mcr p15, 0, r4, c15, c1, 0 @ CP access reg
- mcr p15, 0, r5, c13, c0, 0 @ PID
- mcr p15, 0, r6, c3, c0, 0 @ domain ID
- mcr p15, 0, r7, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg
-
- @ temporarily map resume_turn_on_mmu into the page table,
- @ otherwise prefetch abort occurs after MMU is turned on
- mov r1, r7
- bic r1, r1, #0x00ff
- bic r1, r1, #0x3f00
- ldr r2, =0x542e
-
- adr r3, resume_turn_on_mmu
- mov r3, r3, lsr #20
- orr r4, r2, r3, lsl #20
- ldr r5, [r1, r3, lsl #2]
- str r4, [r1, r3, lsl #2]
-
- @ Mapping page table address in the page table
- mov r6, r1, lsr #20
- orr r7, r2, r6, lsl #20
- ldr r8, [r1, r6, lsl #2]
- str r7, [r1, r6, lsl #2]
-
- ldr r2, =pxa3xx_resume_after_mmu @ absolute virtual address
- b resume_turn_on_mmu @ cache align execution
-
- .text
-pxa3xx_resume_after_mmu:
- /* restore the temporary mapping */
- str r5, [r1, r3, lsl #2]
- str r8, [r1, r6, lsl #2]
- b resume_after_mmu
-
#endif /* CONFIG_PXA3xx */
#ifdef CONFIG_PXA27x
@@ -158,28 +51,23 @@ pxa3xx_resume_after_mmu:
* Forces CPU into sleep state.
*
* r0 = value for PWRMODE M field for desired sleep state
+ * r1 = v:p offset
*/
-
ENTRY(pxa27x_cpu_suspend)
#ifndef CONFIG_IWMMXT
mra r2, r3, acc0
#endif
stmfd sp!, {r2 - r12, lr} @ save registers on stack
-
- bl pxa_cpu_save_cp
-
- mov r5, r0 @ save sleep mode
- bl pxa_cpu_save_sp
-
- @ clean data cache
- bl xscale_flush_kern_cache_all
+ mov r4, r0 @ save sleep mode
+ ldr r3, =pxa_cpu_resume @ resume function
+ bl cpu_suspend
@ Put the processor to sleep
@ (also workaround for sighting 28071)
@ prepare value for sleep mode
- mov r1, r5 @ sleep mode
+ mov r1, r4 @ sleep mode
@ prepare pointer to physical address 0 (virtual mapping in generic.c)
mov r2, #UNCACHED_PHYS_0
@@ -216,21 +104,16 @@ ENTRY(pxa27x_cpu_suspend)
* Forces CPU into sleep state.
*
* r0 = value for PWRMODE M field for desired sleep state
+ * r1 = v:p offset
*/
ENTRY(pxa25x_cpu_suspend)
stmfd sp!, {r2 - r12, lr} @ save registers on stack
-
- bl pxa_cpu_save_cp
-
- mov r5, r0 @ save sleep mode
- bl pxa_cpu_save_sp
-
- @ clean data cache
- bl xscale_flush_kern_cache_all
-
+ mov r4, r0 @ save sleep mode
+ ldr r3, =pxa_cpu_resume @ resume function
+ bl cpu_suspend
@ prepare value for sleep mode
- mov r1, r5 @ sleep mode
+ mov r1, r4 @ sleep mode
@ prepare pointer to physical address 0 (virtual mapping in generic.c)
mov r2, #UNCACHED_PHYS_0
@@ -317,53 +200,9 @@ pxa_cpu_do_suspend:
* pxa_cpu_resume()
*
* entry point from bootloader into kernel during resume
- *
- * Note: Yes, part of the following code is located into the .data section.
- * This is to allow sleep_save_sp to be accessed with a relative load
- * while we can't rely on any MMU translation. We could have put
- * sleep_save_sp in the .text section as well, but some setups might
- * insist on it to be truly read-only.
*/
-
- .data
- .align 5
-ENTRY(pxa_cpu_resume)
- mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off
- msr cpsr_c, r0
-
- ldr r0, sleep_save_sp @ stack phys addr
- ldr r2, =resume_after_mmu @ its absolute virtual address
- ldmfd r0, {r3 - r9, sp} @ CP regs + virt stack ptr
-
- mov r1, #0
- mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
- mcr p15, 0, r1, c7, c7, 0 @ invalidate I & D caches, BTB
-
- mcr p14, 0, r3, c6, c0, 0 @ clock configuration, turbo mode.
- mcr p15, 0, r4, c15, c1, 0 @ CP access reg
- mcr p15, 0, r5, c13, c0, 0 @ PID
- mcr p15, 0, r6, c3, c0, 0 @ domain ID
- mcr p15, 0, r7, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r8, c1, c1, 0 @ auxiliary control reg
- b resume_turn_on_mmu @ cache align execution
-
.align 5
-resume_turn_on_mmu:
- mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, caches, etc.
-
- @ Let us ensure we jump to resume_after_mmu only when the mcr above
- @ actually took effect. They call it the "cpwait" operation.
- mrc p15, 0, r0, c2, c0, 0 @ queue a dependency on CP15
- sub pc, r2, r0, lsr #32 @ jump to virtual addr
- nop
- nop
- nop
-
-sleep_save_sp:
- .word 0 @ preserve stack phys ptr here
-
- .text
-resume_after_mmu:
+pxa_cpu_resume:
ldmfd sp!, {r2, r3}
#ifndef CONFIG_IWMMXT
mar acc0, r2, r3
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
index c31e601eb49..b9b1e5c2b29 100644
--- a/arch/arm/mach-pxa/tosa-bt.c
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -81,8 +81,6 @@ static int tosa_bt_probe(struct platform_device *dev)
goto err_rfk_alloc;
}
- rfkill_set_led_trigger_name(rfk, "tosa-bt");
-
rc = rfkill_register(rfk);
if (rc)
goto err_rfkill;
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index af152e70cfc..f2582ec300d 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -875,6 +875,11 @@ static struct platform_device sharpsl_rom_device = {
.dev.platform_data = &sharpsl_rom_data,
};
+static struct platform_device wm9712_device = {
+ .name = "wm9712-codec",
+ .id = -1,
+};
+
static struct platform_device *devices[] __initdata = {
&tosascoop_device,
&tosascoop_jc_device,
@@ -885,6 +890,7 @@ static struct platform_device *devices[] __initdata = {
&tosaled_device,
&tosa_bt_device,
&sharpsl_rom_device,
+ &wm9712_device,
};
static void tosa_poweroff(void)
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index f4b053b3581..b92aa3b8c4f 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -676,7 +676,7 @@ static struct pxa2xx_udc_mach_info zeus_udc_info = {
static void zeus_power_off(void)
{
local_irq_disable();
- pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP);
+ pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET);
}
#else
#define zeus_power_off NULL
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index 7ca138a943a..b9a9805e482 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -19,7 +19,7 @@ config REALVIEW_EB_A9MP
config REALVIEW_EB_ARM11MP
bool "Support ARM11MPCore Tile"
depends on MACH_REALVIEW_EB
- select CPU_V6
+ select CPU_V6K
select ARCH_HAS_BARRIERS if SMP
help
Enable support for the ARM11MPCore tile fitted to the Realview(R)
@@ -36,7 +36,7 @@ config REALVIEW_EB_ARM11MP_REVB
config MACH_REALVIEW_PB11MP
bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
- select CPU_V6
+ select CPU_V6K
select ARM_GIC
select HAVE_PATA_PLATFORM
select ARCH_HAS_BARRIERS if SMP
@@ -45,6 +45,7 @@ config MACH_REALVIEW_PB11MP
the ARM11MPCore. This platform has an on-board ARM11MPCore and has
support for PCI-E and Compact Flash.
+# ARMv6 CPU without K extensions, but does have the new exclusive ops
config MACH_REALVIEW_PB1176
bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
select CPU_V6
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index a0cb2581894..50825a3f91c 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -99,6 +99,7 @@ config MACH_NEO1973_GTA02
select POWER_SUPPLY
select MACH_NEO1973
select S3C2410_PWM
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
diff --git a/arch/arm/mach-s3c2440/include/mach/gta02.h b/arch/arm/mach-s3c2440/include/mach/gta02.h
index 953331d8d56..3a56a229cac 100644
--- a/arch/arm/mach-s3c2440/include/mach/gta02.h
+++ b/arch/arm/mach-s3c2440/include/mach/gta02.h
@@ -44,19 +44,19 @@
#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG(10) /* v3 + v4 only */
#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG(11) /* v3 + v4 only */
-#define GTA02_GPIO_AMP_SHUT S3C2440_GPJ1 /* v2 + v3 + v4 only */
-#define GTA02v1_GPIO_WLAN_GPIO10 S3C2440_GPJ2
-#define GTA02_GPIO_HP_IN S3C2440_GPJ2 /* v2 + v3 + v4 only */
-#define GTA02_GPIO_INT0 S3C2440_GPJ3 /* v2 + v3 + v4 only */
-#define GTA02_GPIO_nGSM_EN S3C2440_GPJ4
-#define GTA02_GPIO_3D_RESET S3C2440_GPJ5
-#define GTA02_GPIO_nDL_GSM S3C2440_GPJ6 /* v4 + v5 only */
-#define GTA02_GPIO_WLAN_GPIO0 S3C2440_GPJ7
-#define GTA02v1_GPIO_BAT_ID S3C2440_GPJ8
-#define GTA02_GPIO_KEEPACT S3C2440_GPJ8
-#define GTA02v1_GPIO_HP_IN S3C2440_GPJ10
-#define GTA02_CHIP_PWD S3C2440_GPJ11 /* v2 + v3 + v4 only */
-#define GTA02_GPIO_nWLAN_RESET S3C2440_GPJ12 /* v2 + v3 + v4 only */
+#define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */
+#define GTA02v1_GPIO_WLAN_GPIO10 S3C2410_GPJ(2)
+#define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */
+#define GTA02_GPIO_INT0 S3C2410_GPJ(3) /* v2 + v3 + v4 only */
+#define GTA02_GPIO_nGSM_EN S3C2410_GPJ(4)
+#define GTA02_GPIO_3D_RESET S3C2410_GPJ(5)
+#define GTA02_GPIO_nDL_GSM S3C2410_GPJ(6) /* v4 + v5 only */
+#define GTA02_GPIO_WLAN_GPIO0 S3C2410_GPJ(7)
+#define GTA02v1_GPIO_BAT_ID S3C2410_GPJ(8)
+#define GTA02_GPIO_KEEPACT S3C2410_GPJ(8)
+#define GTA02v1_GPIO_HP_IN S3C2410_GPJ(10)
+#define GTA02_CHIP_PWD S3C2410_GPJ(11) /* v2 + v3 + v4 only */
+#define GTA02_GPIO_nWLAN_RESET S3C2410_GPJ(12) /* v2 + v3 + v4 only */
#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0
#define GTA02_IRQ_MODEM IRQ_EINT1
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index dd378206450..fdfc4d5e37a 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -151,6 +151,12 @@ static struct clk init_clocks_off[] = {
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_IIC,
}, {
+ .name = "i2c",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C6410_CLKCON_PCLK_I2C1,
+ }, {
.name = "iis",
.id = 0,
.parent = &clk_p,
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index 135db1b4125..c35585cf8c4 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -690,12 +690,12 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
regptr = regs + PL080_Cx_BASE(0);
- for (ch = 0; ch < 8; ch++, chno++, chptr++) {
- printk(KERN_INFO "%s: registering DMA %d (%p)\n",
- __func__, chno, regptr);
+ for (ch = 0; ch < 8; ch++, chptr++) {
+ pr_debug("%s: registering DMA %d (%p)\n",
+ __func__, chno + ch, regptr);
chptr->bit = 1 << ch;
- chptr->number = chno;
+ chptr->number = chno + ch;
chptr->dmac = dmac;
chptr->regs = regptr;
regptr += PL080_Cx_STRIDE;
@@ -704,7 +704,8 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
/* for the moment, permanently enable the controller */
writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
- printk(KERN_INFO "PL080: IRQ %d, at %p\n", irq, regs);
+ printk(KERN_INFO "PL080: IRQ %d, at %p, channels %d..%d\n",
+ irq, regs, chno, chno+8);
return 0;
diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c
index fd99a82e82c..92b09085caa 100644
--- a/arch/arm/mach-s3c64xx/gpiolib.c
+++ b/arch/arm/mach-s3c64xx/gpiolib.c
@@ -72,7 +72,7 @@ static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
.get_pull = s3c_gpio_getpull_updown,
};
-int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
+static int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
{
return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
}
@@ -138,7 +138,7 @@ static struct s3c_gpio_chip gpio_4bit[] = {
},
};
-int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
+static int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
{
return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
}
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index e85192a86fb..a80a3163dd3 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -28,6 +28,7 @@
#include <linux/delay.h>
#include <linux/smsc911x.h>
#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#ifdef CONFIG_SMDK6410_WM1190_EV1
#include <linux/mfd/wm8350/core.h>
@@ -351,7 +352,7 @@ static struct regulator_init_data smdk6410_vddpll = {
/* VDD_UH_MMC, LDO5 on J5 */
static struct regulator_init_data smdk6410_vdduh_mmc = {
.constraints = {
- .name = "PVDD_UH/PVDD_MMC",
+ .name = "PVDD_UH+PVDD_MMC",
.always_on = 1,
},
};
@@ -417,7 +418,7 @@ static struct regulator_init_data smdk6410_vddaudio = {
/* S3C64xx internal logic & PLL */
static struct regulator_init_data wm8350_dcdc1_data = {
.constraints = {
- .name = "PVDD_INT/PVDD_PLL",
+ .name = "PVDD_INT+PVDD_PLL",
.min_uV = 1200000,
.max_uV = 1200000,
.always_on = 1,
@@ -452,7 +453,7 @@ static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
static struct regulator_init_data wm8350_dcdc4_data = {
.constraints = {
- .name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
+ .name = "PVDD_HI+PVDD_EXT+PVDD_SYS+PVCCM2MTV",
.min_uV = 3000000,
.max_uV = 3000000,
.always_on = 1,
@@ -464,7 +465,7 @@ static struct regulator_init_data wm8350_dcdc4_data = {
/* OTGi/1190-EV1 HPVDD & AVDD */
static struct regulator_init_data wm8350_ldo4_data = {
.constraints = {
- .name = "PVDD_OTGI/HPVDD/AVDD",
+ .name = "PVDD_OTGI+HPVDD+AVDD",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
@@ -552,7 +553,7 @@ static struct wm831x_backlight_pdata wm1192_backlight_pdata = {
static struct regulator_init_data wm1192_dcdc3 = {
.constraints = {
- .name = "PVDD_MEM/PVDD_GPS",
+ .name = "PVDD_MEM+PVDD_GPS",
.always_on = 1,
},
};
@@ -563,7 +564,7 @@ static struct regulator_consumer_supply wm1192_ldo1_consumers[] = {
static struct regulator_init_data wm1192_ldo1 = {
.constraints = {
- .name = "PVDD_LCD/PVDD_EXT",
+ .name = "PVDD_LCD+PVDD_EXT",
.always_on = 1,
},
.consumer_supplies = wm1192_ldo1_consumers,
diff --git a/arch/arm/mach-s3c64xx/setup-keypad.c b/arch/arm/mach-s3c64xx/setup-keypad.c
index f8ed0d22db7..1d4d0ee9e87 100644
--- a/arch/arm/mach-s3c64xx/setup-keypad.c
+++ b/arch/arm/mach-s3c64xx/setup-keypad.c
@@ -17,7 +17,7 @@
void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
{
/* Set all the necessary GPK pins to special-function 3: KP_ROW[x] */
- s3c_gpio_cfgrange_nopull(S3C64XX_GPK(8), 8 + rows, S3C_GPIO_SFN(3));
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPK(8), rows, S3C_GPIO_SFN(3));
/* Set all the necessary GPL pins to special-function 3: KP_COL[x] */
s3c_gpio_cfgrange_nopull(S3C64XX_GPL(0), cols, S3C_GPIO_SFN(3));
diff --git a/arch/arm/mach-s3c64xx/setup-sdhci.c b/arch/arm/mach-s3c64xx/setup-sdhci.c
index 1a942037c4e..f344a222bc8 100644
--- a/arch/arm/mach-s3c64xx/setup-sdhci.c
+++ b/arch/arm/mach-s3c64xx/setup-sdhci.c
@@ -56,7 +56,7 @@ void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
else
ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
- printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
+ pr_debug("%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
writel(ctrl2, r + S3C_SDHCI_CONTROL2);
writel(ctrl3, r + S3C_SDHCI_CONTROL3);
}
diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S
index b2ef4431736..afe5a762f46 100644
--- a/arch/arm/mach-s3c64xx/sleep.S
+++ b/arch/arm/mach-s3c64xx/sleep.S
@@ -32,25 +32,13 @@
* code after resume.
*
* entry:
- * r0 = pointer to the save block
+ * r1 = v:p offset
*/
ENTRY(s3c_cpu_save)
stmfd sp!, { r4 - r12, lr }
-
- mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
- mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
- mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control
- mrc p15, 0, r9, c1, c0, 0 @ Control register
- mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
- mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls
-
- stmia r0, { r4 - r13 } @ Save CP registers and SP
-
- @@ save our state to ram
- bl s3c_pm_cb_flushcache
+ ldr r3, =resume_with_mmu
+ bl cpu_suspend
@@ call final suspend code
ldr r0, =pm_cpu_sleep
@@ -61,18 +49,6 @@ ENTRY(s3c_cpu_save)
resume_with_mmu:
ldmfd sp!, { r4 - r12, pc } @ return, from sp from s3c_cpu_save
- .data
-
- /* the next bit is code, but it requires easy access to the
- * s3c_sleep_save_phys data before the MMU is switched on, so
- * we store the code that needs this variable in the .data where
- * the value can be written to (the .text segment is RO).
- */
-
- .global s3c_sleep_save_phys
-s3c_sleep_save_phys:
- .word 0
-
/* Sleep magic, the word before the resume entry point so that the
* bootloader can check for a resumeable image. */
@@ -110,35 +86,4 @@ ENTRY(s3c_cpu_resume)
orr r0, r0, #1 << 15 @ GPN15
str r0, [ r3, #S3C64XX_GPNDAT ]
#endif
-
- /* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches
- * are thoroughly cleaned just in case the bootloader didn't do it
- * for us. */
- mov r0, #0
- mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache
- mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
- mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache
- mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
- @@mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs
- @@mcr p15, 0, r0, c7, c7, 0 @ Invalidate I + D caches
-
- ldr r0, s3c_sleep_save_phys
- ldmia r0, { r4 - r13 }
-
- mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mcr p15, 0, r5, c3, c0, 0 @ Domain ID
- mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
- mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
- mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control
- mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register
-
- mov r0, #0 @ restore copro access controls
- mcr p15, 0, r11, c1, c0, 2 @ Co-processor access controls
- mcr p15, 0, r0, c7, c5, 4
-
- ldr r2, =resume_with_mmu
- mcr p15, 0, r9, c1, c0, 0 /* turn mmu back on */
- nop
- mov pc, r2 /* jump back */
-
- .end
+ b cpu_resume
diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h
index 203dd5a18bd..058dab4482a 100644
--- a/arch/arm/mach-s5p6442/include/mach/map.h
+++ b/arch/arm/mach-s5p6442/include/mach/map.h
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s5p6442/include/mach/map.h
*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5P6442 - Memory map definitions
@@ -16,56 +16,61 @@
#include <plat/map-base.h>
#include <plat/map-s5p.h>
-#define S5P6442_PA_CHIPID (0xE0000000)
-#define S5P_PA_CHIPID S5P6442_PA_CHIPID
+#define S5P6442_PA_SDRAM 0x20000000
-#define S5P6442_PA_SYSCON (0xE0100000)
-#define S5P_PA_SYSCON S5P6442_PA_SYSCON
+#define S5P6442_PA_I2S0 0xC0B00000
+#define S5P6442_PA_I2S1 0xF2200000
-#define S5P6442_PA_GPIO (0xE0200000)
+#define S5P6442_PA_CHIPID 0xE0000000
-#define S5P6442_PA_VIC0 (0xE4000000)
-#define S5P6442_PA_VIC1 (0xE4100000)
-#define S5P6442_PA_VIC2 (0xE4200000)
+#define S5P6442_PA_SYSCON 0xE0100000
-#define S5P6442_PA_SROMC (0xE7000000)
-#define S5P_PA_SROMC S5P6442_PA_SROMC
+#define S5P6442_PA_GPIO 0xE0200000
-#define S5P6442_PA_MDMA 0xE8000000
-#define S5P6442_PA_PDMA 0xE9000000
+#define S5P6442_PA_VIC0 0xE4000000
+#define S5P6442_PA_VIC1 0xE4100000
+#define S5P6442_PA_VIC2 0xE4200000
-#define S5P6442_PA_TIMER (0xEA000000)
-#define S5P_PA_TIMER S5P6442_PA_TIMER
+#define S5P6442_PA_SROMC 0xE7000000
-#define S5P6442_PA_SYSTIMER (0xEA100000)
+#define S5P6442_PA_MDMA 0xE8000000
+#define S5P6442_PA_PDMA 0xE9000000
-#define S5P6442_PA_WATCHDOG (0xEA200000)
+#define S5P6442_PA_TIMER 0xEA000000
-#define S5P6442_PA_UART (0xEC000000)
+#define S5P6442_PA_SYSTIMER 0xEA100000
-#define S5P_PA_UART0 (S5P6442_PA_UART + 0x0)
-#define S5P_PA_UART1 (S5P6442_PA_UART + 0x400)
-#define S5P_PA_UART2 (S5P6442_PA_UART + 0x800)
-#define S5P_SZ_UART SZ_256
+#define S5P6442_PA_WATCHDOG 0xEA200000
-#define S5P6442_PA_IIC0 (0xEC100000)
+#define S5P6442_PA_UART 0xEC000000
-#define S5P6442_PA_SDRAM (0x20000000)
-#define S5P_PA_SDRAM S5P6442_PA_SDRAM
+#define S5P6442_PA_IIC0 0xEC100000
#define S5P6442_PA_SPI 0xEC300000
-/* I2S */
-#define S5P6442_PA_I2S0 0xC0B00000
-#define S5P6442_PA_I2S1 0xF2200000
-
-/* PCM */
#define S5P6442_PA_PCM0 0xF2400000
#define S5P6442_PA_PCM1 0xF2500000
-/* compatibiltiy defines. */
+/* Compatibiltiy Defines */
+
+#define S3C_PA_IIC S5P6442_PA_IIC0
#define S3C_PA_WDT S5P6442_PA_WATCHDOG
+
+#define S5P_PA_CHIPID S5P6442_PA_CHIPID
+#define S5P_PA_SDRAM S5P6442_PA_SDRAM
+#define S5P_PA_SROMC S5P6442_PA_SROMC
+#define S5P_PA_SYSCON S5P6442_PA_SYSCON
+#define S5P_PA_TIMER S5P6442_PA_TIMER
+
+/* UART */
+
#define S3C_PA_UART S5P6442_PA_UART
-#define S3C_PA_IIC S5P6442_PA_IIC0
+
+#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0 S5P_PA_UART(0)
+#define S5P_PA_UART1 S5P_PA_UART(1)
+#define S5P_PA_UART2 S5P_PA_UART(2)
+
+#define S5P_SZ_UART SZ_256
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h
index 5486c8f01f1..adb5f298ead 100644
--- a/arch/arm/mach-s5p64x0/include/mach/gpio.h
+++ b/arch/arm/mach-s5p64x0/include/mach/gpio.h
@@ -23,7 +23,7 @@
#define S5P6440_GPIO_A_NR (6)
#define S5P6440_GPIO_B_NR (7)
#define S5P6440_GPIO_C_NR (8)
-#define S5P6440_GPIO_F_NR (2)
+#define S5P6440_GPIO_F_NR (16)
#define S5P6440_GPIO_G_NR (7)
#define S5P6440_GPIO_H_NR (10)
#define S5P6440_GPIO_I_NR (16)
@@ -36,7 +36,7 @@
#define S5P6450_GPIO_B_NR (7)
#define S5P6450_GPIO_C_NR (8)
#define S5P6450_GPIO_D_NR (8)
-#define S5P6450_GPIO_F_NR (2)
+#define S5P6450_GPIO_F_NR (16)
#define S5P6450_GPIO_G_NR (14)
#define S5P6450_GPIO_H_NR (10)
#define S5P6450_GPIO_I_NR (16)
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
index a9365e5ba61..95c91257c7c 100644
--- a/arch/arm/mach-s5p64x0/include/mach/map.h
+++ b/arch/arm/mach-s5p64x0/include/mach/map.h
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s5p64x0/include/mach/map.h
*
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5P64X0 - Memory map definitions
@@ -16,64 +16,46 @@
#include <plat/map-base.h>
#include <plat/map-s5p.h>
-#define S5P64X0_PA_SDRAM (0x20000000)
+#define S5P64X0_PA_SDRAM 0x20000000
-#define S5P64X0_PA_CHIPID (0xE0000000)
-#define S5P_PA_CHIPID S5P64X0_PA_CHIPID
-
-#define S5P64X0_PA_SYSCON (0xE0100000)
-#define S5P_PA_SYSCON S5P64X0_PA_SYSCON
-
-#define S5P64X0_PA_GPIO (0xE0308000)
-
-#define S5P64X0_PA_VIC0 (0xE4000000)
-#define S5P64X0_PA_VIC1 (0xE4100000)
+#define S5P64X0_PA_CHIPID 0xE0000000
-#define S5P64X0_PA_SROMC (0xE7000000)
-#define S5P_PA_SROMC S5P64X0_PA_SROMC
-
-#define S5P64X0_PA_PDMA (0xE9000000)
-
-#define S5P64X0_PA_TIMER (0xEA000000)
-#define S5P_PA_TIMER S5P64X0_PA_TIMER
+#define S5P64X0_PA_SYSCON 0xE0100000
-#define S5P64X0_PA_RTC (0xEA100000)
+#define S5P64X0_PA_GPIO 0xE0308000
-#define S5P64X0_PA_WDT (0xEA200000)
+#define S5P64X0_PA_VIC0 0xE4000000
+#define S5P64X0_PA_VIC1 0xE4100000
-#define S5P6440_PA_UART(x) (0xEC000000 + ((x) * S3C_UART_OFFSET))
-#define S5P6450_PA_UART(x) ((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000))
+#define S5P64X0_PA_SROMC 0xE7000000
-#define S5P_PA_UART0 S5P6450_PA_UART(0)
-#define S5P_PA_UART1 S5P6450_PA_UART(1)
-#define S5P_PA_UART2 S5P6450_PA_UART(2)
-#define S5P_PA_UART3 S5P6450_PA_UART(3)
-#define S5P_PA_UART4 S5P6450_PA_UART(4)
-#define S5P_PA_UART5 S5P6450_PA_UART(5)
+#define S5P64X0_PA_PDMA 0xE9000000
-#define S5P_SZ_UART SZ_256
+#define S5P64X0_PA_TIMER 0xEA000000
+#define S5P64X0_PA_RTC 0xEA100000
+#define S5P64X0_PA_WDT 0xEA200000
-#define S5P6440_PA_IIC0 (0xEC104000)
-#define S5P6440_PA_IIC1 (0xEC20F000)
-#define S5P6450_PA_IIC0 (0xEC100000)
-#define S5P6450_PA_IIC1 (0xEC200000)
+#define S5P6440_PA_IIC0 0xEC104000
+#define S5P6440_PA_IIC1 0xEC20F000
+#define S5P6450_PA_IIC0 0xEC100000
+#define S5P6450_PA_IIC1 0xEC200000
-#define S5P64X0_PA_SPI0 (0xEC400000)
-#define S5P64X0_PA_SPI1 (0xEC500000)
+#define S5P64X0_PA_SPI0 0xEC400000
+#define S5P64X0_PA_SPI1 0xEC500000
-#define S5P64X0_PA_HSOTG (0xED100000)
+#define S5P64X0_PA_HSOTG 0xED100000
#define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
-#define S5P64X0_PA_I2S (0xF2000000)
+#define S5P64X0_PA_I2S 0xF2000000
#define S5P6450_PA_I2S1 0xF2800000
#define S5P6450_PA_I2S2 0xF2900000
-#define S5P64X0_PA_PCM (0xF2100000)
+#define S5P64X0_PA_PCM 0xF2100000
-#define S5P64X0_PA_ADC (0xF3000000)
+#define S5P64X0_PA_ADC 0xF3000000
-/* compatibiltiy defines. */
+/* Compatibiltiy Defines */
#define S3C_PA_HSMMC0 S5P64X0_PA_HSMMC(0)
#define S3C_PA_HSMMC1 S5P64X0_PA_HSMMC(1)
@@ -83,6 +65,25 @@
#define S3C_PA_RTC S5P64X0_PA_RTC
#define S3C_PA_WDT S5P64X0_PA_WDT
+#define S5P_PA_CHIPID S5P64X0_PA_CHIPID
+#define S5P_PA_SROMC S5P64X0_PA_SROMC
+#define S5P_PA_SYSCON S5P64X0_PA_SYSCON
+#define S5P_PA_TIMER S5P64X0_PA_TIMER
+
#define SAMSUNG_PA_ADC S5P64X0_PA_ADC
+/* UART */
+
+#define S5P6440_PA_UART(x) (0xEC000000 + ((x) * S3C_UART_OFFSET))
+#define S5P6450_PA_UART(x) ((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000))
+
+#define S5P_PA_UART0 S5P6450_PA_UART(0)
+#define S5P_PA_UART1 S5P6450_PA_UART(1)
+#define S5P_PA_UART2 S5P6450_PA_UART(2)
+#define S5P_PA_UART3 S5P6450_PA_UART(3)
+#define S5P_PA_UART4 S5P6450_PA_UART(4)
+#define S5P_PA_UART5 S5P6450_PA_UART(5)
+
+#define S5P_SZ_UART SZ_256
+
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index 328467b346a..ccbe6b767f7 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -1,5 +1,8 @@
/* linux/arch/arm/mach-s5pc100/include/mach/map.h
*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
@@ -16,145 +19,115 @@
#include <plat/map-base.h>
#include <plat/map-s5p.h>
-/*
- * map-base.h has already defined virtual memory address
- * S3C_VA_IRQ S3C_ADDR(0x00000000) irq controller(s)
- * S3C_VA_SYS S3C_ADDR(0x00100000) system control
- * S3C_VA_MEM S3C_ADDR(0x00200000) system control (not used)
- * S3C_VA_TIMER S3C_ADDR(0x00300000) timer block
- * S3C_VA_WATCHDOG S3C_ADDR(0x00400000) watchdog
- * S3C_VA_UART S3C_ADDR(0x01000000) UART
- *
- * S5PC100 specific virtual memory address can be defined here
- * S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) GPIO
- *
- */
+#define S5PC100_PA_SDRAM 0x20000000
+
+#define S5PC100_PA_ONENAND 0xE7100000
+#define S5PC100_PA_ONENAND_BUF 0xB0000000
+
+#define S5PC100_PA_CHIPID 0xE0000000
-#define S5PC100_PA_ONENAND_BUF (0xB0000000)
-#define S5PC100_SZ_ONENAND_BUF (SZ_256M - SZ_32M)
+#define S5PC100_PA_SYSCON 0xE0100000
-/* Chip ID */
+#define S5PC100_PA_OTHERS 0xE0200000
-#define S5PC100_PA_CHIPID (0xE0000000)
-#define S5P_PA_CHIPID S5PC100_PA_CHIPID
+#define S5PC100_PA_GPIO 0xE0300000
-#define S5PC100_PA_SYSCON (0xE0100000)
-#define S5P_PA_SYSCON S5PC100_PA_SYSCON
+#define S5PC100_PA_VIC0 0xE4000000
+#define S5PC100_PA_VIC1 0xE4100000
+#define S5PC100_PA_VIC2 0xE4200000
-#define S5PC100_PA_OTHERS (0xE0200000)
-#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000)
+#define S5PC100_PA_SROMC 0xE7000000
-#define S5PC100_PA_GPIO (0xE0300000)
-#define S5PC1XX_VA_GPIO S3C_ADDR(0x00500000)
+#define S5PC100_PA_CFCON 0xE7800000
-/* Interrupt */
-#define S5PC100_PA_VIC0 (0xE4000000)
-#define S5PC100_PA_VIC1 (0xE4100000)
-#define S5PC100_PA_VIC2 (0xE4200000)
-#define S5PC100_VA_VIC S3C_VA_IRQ
-#define S5PC100_VA_VIC_OFFSET 0x10000
-#define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+#define S5PC100_PA_MDMA 0xE8100000
+#define S5PC100_PA_PDMA0 0xE9000000
+#define S5PC100_PA_PDMA1 0xE9200000
-#define S5PC100_PA_SROMC (0xE7000000)
-#define S5P_PA_SROMC S5PC100_PA_SROMC
+#define S5PC100_PA_TIMER 0xEA000000
+#define S5PC100_PA_SYSTIMER 0xEA100000
+#define S5PC100_PA_WATCHDOG 0xEA200000
+#define S5PC100_PA_RTC 0xEA300000
-#define S5PC100_PA_ONENAND (0xE7100000)
+#define S5PC100_PA_UART 0xEC000000
-#define S5PC100_PA_CFCON (0xE7800000)
+#define S5PC100_PA_IIC0 0xEC100000
+#define S5PC100_PA_IIC1 0xEC200000
-/* DMA */
-#define S5PC100_PA_MDMA (0xE8100000)
-#define S5PC100_PA_PDMA0 (0xE9000000)
-#define S5PC100_PA_PDMA1 (0xE9200000)
+#define S5PC100_PA_SPI0 0xEC300000
+#define S5PC100_PA_SPI1 0xEC400000
+#define S5PC100_PA_SPI2 0xEC500000
-/* Timer */
-#define S5PC100_PA_TIMER (0xEA000000)
-#define S5P_PA_TIMER S5PC100_PA_TIMER
+#define S5PC100_PA_USB_HSOTG 0xED200000
+#define S5PC100_PA_USB_HSPHY 0xED300000
-#define S5PC100_PA_SYSTIMER (0xEA100000)
+#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
-#define S5PC100_PA_WATCHDOG (0xEA200000)
-#define S5PC100_PA_RTC (0xEA300000)
+#define S5PC100_PA_FB 0xEE000000
-#define S5PC100_PA_UART (0xEC000000)
+#define S5PC100_PA_FIMC0 0xEE200000
+#define S5PC100_PA_FIMC1 0xEE300000
+#define S5PC100_PA_FIMC2 0xEE400000
-#define S5P_PA_UART0 (S5PC100_PA_UART + 0x0)
-#define S5P_PA_UART1 (S5PC100_PA_UART + 0x400)
-#define S5P_PA_UART2 (S5PC100_PA_UART + 0x800)
-#define S5P_PA_UART3 (S5PC100_PA_UART + 0xC00)
-#define S5P_SZ_UART SZ_256
+#define S5PC100_PA_I2S0 0xF2000000
+#define S5PC100_PA_I2S1 0xF2100000
+#define S5PC100_PA_I2S2 0xF2200000
-#define S5PC100_PA_IIC0 (0xEC100000)
-#define S5PC100_PA_IIC1 (0xEC200000)
+#define S5PC100_PA_AC97 0xF2300000
-/* SPI */
-#define S5PC100_PA_SPI0 0xEC300000
-#define S5PC100_PA_SPI1 0xEC400000
-#define S5PC100_PA_SPI2 0xEC500000
+#define S5PC100_PA_PCM0 0xF2400000
+#define S5PC100_PA_PCM1 0xF2500000
-/* USB HS OTG */
-#define S5PC100_PA_USB_HSOTG (0xED200000)
-#define S5PC100_PA_USB_HSPHY (0xED300000)
+#define S5PC100_PA_SPDIF 0xF2600000
-#define S5PC100_PA_FB (0xEE000000)
+#define S5PC100_PA_TSADC 0xF3000000
-#define S5PC100_PA_FIMC0 (0xEE200000)
-#define S5PC100_PA_FIMC1 (0xEE300000)
-#define S5PC100_PA_FIMC2 (0xEE400000)
+#define S5PC100_PA_KEYPAD 0xF3100000
-#define S5PC100_PA_I2S0 (0xF2000000)
-#define S5PC100_PA_I2S1 (0xF2100000)
-#define S5PC100_PA_I2S2 (0xF2200000)
+/* Compatibiltiy Defines */
-#define S5PC100_PA_AC97 0xF2300000
+#define S3C_PA_FB S5PC100_PA_FB
+#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0)
+#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1)
+#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2)
+#define S3C_PA_IIC S5PC100_PA_IIC0
+#define S3C_PA_IIC1 S5PC100_PA_IIC1
+#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD
+#define S3C_PA_ONENAND S5PC100_PA_ONENAND
+#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF
+#define S3C_PA_RTC S5PC100_PA_RTC
+#define S3C_PA_TSADC S5PC100_PA_TSADC
+#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG
+#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY
+#define S3C_PA_WDT S5PC100_PA_WATCHDOG
-/* PCM */
-#define S5PC100_PA_PCM0 0xF2400000
-#define S5PC100_PA_PCM1 0xF2500000
+#define S5P_PA_CHIPID S5PC100_PA_CHIPID
+#define S5P_PA_FIMC0 S5PC100_PA_FIMC0
+#define S5P_PA_FIMC1 S5PC100_PA_FIMC1
+#define S5P_PA_FIMC2 S5PC100_PA_FIMC2
+#define S5P_PA_SDRAM S5PC100_PA_SDRAM
+#define S5P_PA_SROMC S5PC100_PA_SROMC
+#define S5P_PA_SYSCON S5PC100_PA_SYSCON
+#define S5P_PA_TIMER S5PC100_PA_TIMER
-#define S5PC100_PA_SPDIF 0xF2600000
+#define SAMSUNG_PA_ADC S5PC100_PA_TSADC
+#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON
+#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD
-#define S5PC100_PA_TSADC (0xF3000000)
+#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000)
-/* KEYPAD */
-#define S5PC100_PA_KEYPAD (0xF3100000)
+#define S3C_SZ_ONENAND_BUF (SZ_256M - SZ_32M)
-#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
+/* UART */
-#define S5PC100_PA_SDRAM (0x20000000)
-#define S5P_PA_SDRAM S5PC100_PA_SDRAM
+#define S3C_PA_UART S5PC100_PA_UART
-/* compatibiltiy defines. */
-#define S3C_PA_UART S5PC100_PA_UART
-#define S3C_PA_IIC S5PC100_PA_IIC0
-#define S3C_PA_IIC1 S5PC100_PA_IIC1
-#define S3C_PA_FB S5PC100_PA_FB
-#define S3C_PA_G2D S5PC100_PA_G2D
-#define S3C_PA_G3D S5PC100_PA_G3D
-#define S3C_PA_JPEG S5PC100_PA_JPEG
-#define S3C_PA_ROTATOR S5PC100_PA_ROTATOR
-#define S5P_VA_VIC0 S5PC1XX_VA_VIC(0)
-#define S5P_VA_VIC1 S5PC1XX_VA_VIC(1)
-#define S5P_VA_VIC2 S5PC1XX_VA_VIC(2)
-#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG
-#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY
-#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0)
-#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1)
-#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2)
-#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD
-#define S3C_PA_WDT S5PC100_PA_WATCHDOG
-#define S3C_PA_TSADC S5PC100_PA_TSADC
-#define S3C_PA_ONENAND S5PC100_PA_ONENAND
-#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF
-#define S3C_SZ_ONENAND_BUF S5PC100_SZ_ONENAND_BUF
-#define S3C_PA_RTC S5PC100_PA_RTC
-
-#define SAMSUNG_PA_ADC S5PC100_PA_TSADC
-#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON
-#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD
+#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0 S5P_PA_UART(0)
+#define S5P_PA_UART1 S5P_PA_UART(1)
+#define S5P_PA_UART2 S5P_PA_UART(2)
+#define S5P_PA_UART3 S5P_PA_UART(3)
-#define S5P_PA_FIMC0 S5PC100_PA_FIMC0
-#define S5P_PA_FIMC1 S5PC100_PA_FIMC1
-#define S5P_PA_FIMC2 S5PC100_PA_FIMC2
+#define S5P_SZ_UART SZ_256
-#endif /* __ASM_ARCH_C100_MAP_H */
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index 3611492ad68..1dd58836fd4 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s5pv210/include/mach/map.h
*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5PV210 - Memory map definitions
@@ -16,122 +16,120 @@
#include <plat/map-base.h>
#include <plat/map-s5p.h>
-#define S5PV210_PA_SROM_BANK5 (0xA8000000)
+#define S5PV210_PA_SDRAM 0x20000000
-#define S5PC110_PA_ONENAND (0xB0000000)
-#define S5P_PA_ONENAND S5PC110_PA_ONENAND
+#define S5PV210_PA_SROM_BANK5 0xA8000000
-#define S5PC110_PA_ONENAND_DMA (0xB0600000)
-#define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA
+#define S5PC110_PA_ONENAND 0xB0000000
+#define S5PC110_PA_ONENAND_DMA 0xB0600000
-#define S5PV210_PA_CHIPID (0xE0000000)
-#define S5P_PA_CHIPID S5PV210_PA_CHIPID
+#define S5PV210_PA_CHIPID 0xE0000000
-#define S5PV210_PA_SYSCON (0xE0100000)
-#define S5P_PA_SYSCON S5PV210_PA_SYSCON
+#define S5PV210_PA_SYSCON 0xE0100000
-#define S5PV210_PA_GPIO (0xE0200000)
+#define S5PV210_PA_GPIO 0xE0200000
-/* SPI */
-#define S5PV210_PA_SPI0 0xE1300000
-#define S5PV210_PA_SPI1 0xE1400000
+#define S5PV210_PA_SPDIF 0xE1100000
-#define S5PV210_PA_KEYPAD (0xE1600000)
+#define S5PV210_PA_SPI0 0xE1300000
+#define S5PV210_PA_SPI1 0xE1400000
-#define S5PV210_PA_IIC0 (0xE1800000)
-#define S5PV210_PA_IIC1 (0xFAB00000)
-#define S5PV210_PA_IIC2 (0xE1A00000)
+#define S5PV210_PA_KEYPAD 0xE1600000
-#define S5PV210_PA_TIMER (0xE2500000)
-#define S5P_PA_TIMER S5PV210_PA_TIMER
+#define S5PV210_PA_ADC 0xE1700000
-#define S5PV210_PA_SYSTIMER (0xE2600000)
+#define S5PV210_PA_IIC0 0xE1800000
+#define S5PV210_PA_IIC1 0xFAB00000
+#define S5PV210_PA_IIC2 0xE1A00000
-#define S5PV210_PA_WATCHDOG (0xE2700000)
+#define S5PV210_PA_AC97 0xE2200000
-#define S5PV210_PA_RTC (0xE2800000)
-#define S5PV210_PA_UART (0xE2900000)
+#define S5PV210_PA_PCM0 0xE2300000
+#define S5PV210_PA_PCM1 0xE1200000
+#define S5PV210_PA_PCM2 0xE2B00000
-#define S5P_PA_UART0 (S5PV210_PA_UART + 0x0)
-#define S5P_PA_UART1 (S5PV210_PA_UART + 0x400)
-#define S5P_PA_UART2 (S5PV210_PA_UART + 0x800)
-#define S5P_PA_UART3 (S5PV210_PA_UART + 0xC00)
+#define S5PV210_PA_TIMER 0xE2500000
+#define S5PV210_PA_SYSTIMER 0xE2600000
+#define S5PV210_PA_WATCHDOG 0xE2700000
+#define S5PV210_PA_RTC 0xE2800000
-#define S5P_SZ_UART SZ_256
+#define S5PV210_PA_UART 0xE2900000
-#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define S5PV210_PA_SROMC 0xE8000000
-#define S5PV210_PA_SROMC (0xE8000000)
-#define S5P_PA_SROMC S5PV210_PA_SROMC
+#define S5PV210_PA_CFCON 0xE8200000
-#define S5PV210_PA_CFCON (0xE8200000)
+#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000))
-#define S5PV210_PA_MDMA 0xFA200000
-#define S5PV210_PA_PDMA0 0xE0900000
-#define S5PV210_PA_PDMA1 0xE0A00000
+#define S5PV210_PA_HSOTG 0xEC000000
+#define S5PV210_PA_HSPHY 0xEC100000
-#define S5PV210_PA_FB (0xF8000000)
+#define S5PV210_PA_IIS0 0xEEE30000
+#define S5PV210_PA_IIS1 0xE2100000
+#define S5PV210_PA_IIS2 0xE2A00000
-#define S5PV210_PA_FIMC0 (0xFB200000)
-#define S5PV210_PA_FIMC1 (0xFB300000)
-#define S5PV210_PA_FIMC2 (0xFB400000)
+#define S5PV210_PA_DMC0 0xF0000000
+#define S5PV210_PA_DMC1 0xF1400000
-#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000))
+#define S5PV210_PA_VIC0 0xF2000000
+#define S5PV210_PA_VIC1 0xF2100000
+#define S5PV210_PA_VIC2 0xF2200000
+#define S5PV210_PA_VIC3 0xF2300000
-#define S5PV210_PA_HSOTG (0xEC000000)
-#define S5PV210_PA_HSPHY (0xEC100000)
+#define S5PV210_PA_FB 0xF8000000
-#define S5PV210_PA_VIC0 (0xF2000000)
-#define S5PV210_PA_VIC1 (0xF2100000)
-#define S5PV210_PA_VIC2 (0xF2200000)
-#define S5PV210_PA_VIC3 (0xF2300000)
+#define S5PV210_PA_MDMA 0xFA200000
+#define S5PV210_PA_PDMA0 0xE0900000
+#define S5PV210_PA_PDMA1 0xE0A00000
-#define S5PV210_PA_SDRAM (0x20000000)
-#define S5P_PA_SDRAM S5PV210_PA_SDRAM
+#define S5PV210_PA_MIPI_CSIS 0xFA600000
-/* S/PDIF */
-#define S5PV210_PA_SPDIF 0xE1100000
+#define S5PV210_PA_FIMC0 0xFB200000
+#define S5PV210_PA_FIMC1 0xFB300000
+#define S5PV210_PA_FIMC2 0xFB400000
-/* I2S */
-#define S5PV210_PA_IIS0 0xEEE30000
-#define S5PV210_PA_IIS1 0xE2100000
-#define S5PV210_PA_IIS2 0xE2A00000
+/* Compatibiltiy Defines */
-/* PCM */
-#define S5PV210_PA_PCM0 0xE2300000
-#define S5PV210_PA_PCM1 0xE1200000
-#define S5PV210_PA_PCM2 0xE2B00000
+#define S3C_PA_FB S5PV210_PA_FB
+#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0)
+#define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1)
+#define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2)
+#define S3C_PA_HSMMC3 S5PV210_PA_HSMMC(3)
+#define S3C_PA_IIC S5PV210_PA_IIC0
+#define S3C_PA_IIC1 S5PV210_PA_IIC1
+#define S3C_PA_IIC2 S5PV210_PA_IIC2
+#define S3C_PA_RTC S5PV210_PA_RTC
+#define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG
+#define S3C_PA_WDT S5PV210_PA_WATCHDOG
-/* AC97 */
-#define S5PV210_PA_AC97 0xE2200000
+#define S5P_PA_CHIPID S5PV210_PA_CHIPID
+#define S5P_PA_FIMC0 S5PV210_PA_FIMC0
+#define S5P_PA_FIMC1 S5PV210_PA_FIMC1
+#define S5P_PA_FIMC2 S5PV210_PA_FIMC2
+#define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS
+#define S5P_PA_ONENAND S5PC110_PA_ONENAND
+#define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA
+#define S5P_PA_SDRAM S5PV210_PA_SDRAM
+#define S5P_PA_SROMC S5PV210_PA_SROMC
+#define S5P_PA_SYSCON S5PV210_PA_SYSCON
+#define S5P_PA_TIMER S5PV210_PA_TIMER
-#define S5PV210_PA_ADC (0xE1700000)
+#define SAMSUNG_PA_ADC S5PV210_PA_ADC
+#define SAMSUNG_PA_CFCON S5PV210_PA_CFCON
+#define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD
-#define S5PV210_PA_DMC0 (0xF0000000)
-#define S5PV210_PA_DMC1 (0xF1400000)
+/* UART */
-#define S5PV210_PA_MIPI_CSIS 0xFA600000
+#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
-/* compatibiltiy defines. */
-#define S3C_PA_UART S5PV210_PA_UART
-#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0)
-#define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1)
-#define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2)
-#define S3C_PA_HSMMC3 S5PV210_PA_HSMMC(3)
-#define S3C_PA_IIC S5PV210_PA_IIC0
-#define S3C_PA_IIC1 S5PV210_PA_IIC1
-#define S3C_PA_IIC2 S5PV210_PA_IIC2
-#define S3C_PA_FB S5PV210_PA_FB
-#define S3C_PA_RTC S5PV210_PA_RTC
-#define S3C_PA_WDT S5PV210_PA_WATCHDOG
-#define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG
-#define S5P_PA_FIMC0 S5PV210_PA_FIMC0
-#define S5P_PA_FIMC1 S5PV210_PA_FIMC1
-#define S5P_PA_FIMC2 S5PV210_PA_FIMC2
-#define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS
+#define S3C_PA_UART S5PV210_PA_UART
-#define SAMSUNG_PA_ADC S5PV210_PA_ADC
-#define SAMSUNG_PA_CFCON S5PV210_PA_CFCON
-#define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD
+#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0 S5P_PA_UART(0)
+#define S5P_PA_UART1 S5P_PA_UART(1)
+#define S5P_PA_UART2 S5P_PA_UART(2)
+#define S5P_PA_UART3 S5P_PA_UART(3)
+
+#define S5P_SZ_UART SZ_256
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 461aa035afc..557add4fc56 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -149,7 +149,7 @@ static struct regulator_init_data aquila_ldo2_data = {
static struct regulator_init_data aquila_ldo3_data = {
.constraints = {
- .name = "VUSB/MIPI_1.1V",
+ .name = "VUSB+MIPI_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
@@ -197,7 +197,7 @@ static struct regulator_init_data aquila_ldo7_data = {
static struct regulator_init_data aquila_ldo8_data = {
.constraints = {
- .name = "VUSB/VADC_3.3V",
+ .name = "VUSB+VADC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
@@ -207,7 +207,7 @@ static struct regulator_init_data aquila_ldo8_data = {
static struct regulator_init_data aquila_ldo9_data = {
.constraints = {
- .name = "VCC/VCAM_2.8V",
+ .name = "VCC+VCAM_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
@@ -381,9 +381,12 @@ static struct max8998_platform_data aquila_max8998_pdata = {
.buck1_set1 = S5PV210_GPH0(3),
.buck1_set2 = S5PV210_GPH0(4),
.buck2_set3 = S5PV210_GPH0(5),
- .buck1_max_voltage1 = 1200000,
- .buck1_max_voltage2 = 1200000,
- .buck2_max_voltage = 1200000,
+ .buck1_voltage1 = 1200000,
+ .buck1_voltage2 = 1200000,
+ .buck1_voltage3 = 1200000,
+ .buck1_voltage4 = 1200000,
+ .buck2_voltage1 = 1200000,
+ .buck2_voltage2 = 1200000,
};
#endif
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index e22d5112fd4..056f5c769b0 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -288,7 +288,7 @@ static struct regulator_init_data goni_ldo2_data = {
static struct regulator_init_data goni_ldo3_data = {
.constraints = {
- .name = "VUSB/MIPI_1.1V",
+ .name = "VUSB+MIPI_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
@@ -337,7 +337,7 @@ static struct regulator_init_data goni_ldo7_data = {
static struct regulator_init_data goni_ldo8_data = {
.constraints = {
- .name = "VUSB/VADC_3.3V",
+ .name = "VUSB+VADC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
@@ -347,7 +347,7 @@ static struct regulator_init_data goni_ldo8_data = {
static struct regulator_init_data goni_ldo9_data = {
.constraints = {
- .name = "VCC/VCAM_2.8V",
+ .name = "VCC+VCAM_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
@@ -521,9 +521,12 @@ static struct max8998_platform_data goni_max8998_pdata = {
.buck1_set1 = S5PV210_GPH0(3),
.buck1_set2 = S5PV210_GPH0(4),
.buck2_set3 = S5PV210_GPH0(5),
- .buck1_max_voltage1 = 1200000,
- .buck1_max_voltage2 = 1200000,
- .buck2_max_voltage = 1200000,
+ .buck1_voltage1 = 1200000,
+ .buck1_voltage2 = 1200000,
+ .buck1_voltage3 = 1200000,
+ .buck1_voltage4 = 1200000,
+ .buck2_voltage1 = 1200000,
+ .buck2_voltage2 = 1200000,
};
#endif
diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S
index 27376223ea9..a3d649466fb 100644
--- a/arch/arm/mach-s5pv210/sleep.S
+++ b/arch/arm/mach-s5pv210/sleep.S
@@ -35,50 +35,24 @@
/* s3c_cpu_save
*
* entry:
- * r0 = save address (virtual addr of s3c_sleep_save_phys)
+ * r1 = v:p offset
*/
ENTRY(s3c_cpu_save)
stmfd sp!, { r3 - r12, lr }
-
- mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
- mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
- mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control
- mrc p15, 0, r9, c1, c0, 0 @ Control register
- mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
- mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls
- mrc p15, 0, r12, c10, c2, 0 @ Read PRRR
- mrc p15, 0, r3, c10, c2, 1 @ READ NMRR
-
- stmia r0, { r3 - r13 }
-
- bl s3c_pm_cb_flushcache
+ ldr r3, =resume_with_mmu
+ bl cpu_suspend
ldr r0, =pm_cpu_sleep
ldr r0, [ r0 ]
mov pc, r0
resume_with_mmu:
- /*
- * After MMU is turned on, restore the previous MMU table.
- */
- ldr r9 , =(PAGE_OFFSET - PLAT_PHYS_OFFSET)
- add r4, r4, r9
- str r12, [r4]
-
ldmfd sp!, { r3 - r12, pc }
.ltorg
- .data
-
- .global s3c_sleep_save_phys
-s3c_sleep_save_phys:
- .word 0
-
/* sleep magic, to allow the bootloader to check for an valid
* image to resume to. Must be the first word before the
* s3c_cpu_resume entry.
@@ -96,75 +70,4 @@ s3c_sleep_save_phys:
*/
ENTRY(s3c_cpu_resume)
- mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
- msr cpsr_c, r0
-
- mov r1, #0
- mcr p15, 0, r1, c8, c7, 0 @ invalidate TLBs
- mcr p15, 0, r1, c7, c5, 0 @ invalidate I Cache
-
- ldr r0, s3c_sleep_save_phys @ address of restore block
- ldmia r0, { r3 - r13 }
-
- mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mcr p15, 0, r5, c3, c0, 0 @ Domain ID
-
- mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control
- mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
- mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
-
- mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register
-
- mov r0, #0
- mcr p15, 0, r0, c8, c7, 0 @ Invalidate I & D TLB
-
- mov r0, #0 @ restore copro access
- mcr p15, 0, r11, c1, c0, 2 @ Co-processor access
- mcr p15, 0, r0, c7, c5, 4
-
- mcr p15, 0, r12, c10, c2, 0 @ write PRRR
- mcr p15, 0, r3, c10, c2, 1 @ write NMRR
-
- /*
- * In Cortex-A8, when MMU is turned on, the pipeline is flushed.
- * And there are no valid entries in the MMU table at this point.
- * So before turning on the MMU, the MMU entry for the DRAM address
- * range is added. After the MMU is turned on, the other entries
- * in the MMU table will be restored.
- */
-
- /* r6 = Translation Table BASE0 */
- mov r4, r6
- mov r4, r4, LSR #14
- mov r4, r4, LSL #14
-
- /* Load address for adding to MMU table list */
- ldr r11, =0xE010F000 @ INFORM0 reg.
- ldr r10, [r11, #0]
- mov r10, r10, LSR #18
- bic r10, r10, #0x3
- orr r4, r4, r10
-
- /* Calculate MMU table entry */
- mov r10, r10, LSL #18
- ldr r5, =0x40E
- orr r10, r10, r5
-
- /* Back up originally data */
- ldr r12, [r4]
-
- /* Add calculated MMU table entry into MMU table list */
- str r10, [r4]
-
- ldr r2, =resume_with_mmu
- mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, etc
-
- nop
- nop
- nop
- nop
- nop @ second-to-last before mmu
-
- mov pc, r2 @ go back to virtual address
-
- .ltorg
+ b cpu_resume
diff --git a/arch/arm/mach-s5pv310/Kconfig b/arch/arm/mach-s5pv310/Kconfig
index 09c4c21b70c..b2a9acc5185 100644
--- a/arch/arm/mach-s5pv310/Kconfig
+++ b/arch/arm/mach-s5pv310/Kconfig
@@ -122,6 +122,7 @@ config MACH_SMDKV310
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S5PV310_DEV_PD
+ select S5PV310_DEV_SYSMMU
select S5PV310_SETUP_I2C1
select S5PV310_SETUP_SDHCI
help
diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h
index 74d400625a2..901657fa7a1 100644
--- a/arch/arm/mach-s5pv310/include/mach/map.h
+++ b/arch/arm/mach-s5pv310/include/mach/map.h
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s5pv310/include/mach/map.h
*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5PV310 - Memory map definitions
@@ -23,90 +23,43 @@
#include <plat/map-s5p.h>
-#define S5PV310_PA_SYSRAM (0x02025000)
+#define S5PV310_PA_SYSRAM 0x02025000
-#define S5PV310_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000))
-
-#define S5PC210_PA_ONENAND (0x0C000000)
-#define S5P_PA_ONENAND S5PC210_PA_ONENAND
-
-#define S5PC210_PA_ONENAND_DMA (0x0C600000)
-#define S5P_PA_ONENAND_DMA S5PC210_PA_ONENAND_DMA
-
-#define S5PV310_PA_CHIPID (0x10000000)
-#define S5P_PA_CHIPID S5PV310_PA_CHIPID
-
-#define S5PV310_PA_SYSCON (0x10010000)
-#define S5P_PA_SYSCON S5PV310_PA_SYSCON
+#define S5PV310_PA_I2S0 0x03830000
+#define S5PV310_PA_I2S1 0xE3100000
+#define S5PV310_PA_I2S2 0xE2A00000
-#define S5PV310_PA_PMU (0x10020000)
+#define S5PV310_PA_PCM0 0x03840000
+#define S5PV310_PA_PCM1 0x13980000
+#define S5PV310_PA_PCM2 0x13990000
-#define S5PV310_PA_CMU (0x10030000)
-
-#define S5PV310_PA_WATCHDOG (0x10060000)
-#define S5PV310_PA_RTC (0x10070000)
-
-#define S5PV310_PA_DMC0 (0x10400000)
-
-#define S5PV310_PA_COMBINER (0x10448000)
-
-#define S5PV310_PA_COREPERI (0x10500000)
-#define S5PV310_PA_GIC_CPU (0x10500100)
-#define S5PV310_PA_TWD (0x10500600)
-#define S5PV310_PA_GIC_DIST (0x10501000)
-#define S5PV310_PA_L2CC (0x10502000)
-
-/* DMA */
-#define S5PV310_PA_MDMA 0x10810000
-#define S5PV310_PA_PDMA0 0x12680000
-#define S5PV310_PA_PDMA1 0x12690000
-
-#define S5PV310_PA_GPIO1 (0x11400000)
-#define S5PV310_PA_GPIO2 (0x11000000)
-#define S5PV310_PA_GPIO3 (0x03860000)
-
-#define S5PV310_PA_MIPI_CSIS0 0x11880000
-#define S5PV310_PA_MIPI_CSIS1 0x11890000
+#define S5PV310_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000))
-#define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000))
+#define S5PC210_PA_ONENAND 0x0C000000
+#define S5PC210_PA_ONENAND_DMA 0x0C600000
-#define S5PV310_PA_SROMC (0x12570000)
-#define S5P_PA_SROMC S5PV310_PA_SROMC
+#define S5PV310_PA_CHIPID 0x10000000
-/* S/PDIF */
-#define S5PV310_PA_SPDIF 0xE1100000
+#define S5PV310_PA_SYSCON 0x10010000
+#define S5PV310_PA_PMU 0x10020000
+#define S5PV310_PA_CMU 0x10030000
-/* I2S */
-#define S5PV310_PA_I2S0 0x03830000
-#define S5PV310_PA_I2S1 0xE3100000
-#define S5PV310_PA_I2S2 0xE2A00000
+#define S5PV310_PA_WATCHDOG 0x10060000
+#define S5PV310_PA_RTC 0x10070000
-/* PCM */
-#define S5PV310_PA_PCM0 0x03840000
-#define S5PV310_PA_PCM1 0x13980000
-#define S5PV310_PA_PCM2 0x13990000
+#define S5PV310_PA_DMC0 0x10400000
-/* AC97 */
-#define S5PV310_PA_AC97 0x139A0000
+#define S5PV310_PA_COMBINER 0x10448000
-#define S5PV310_PA_UART (0x13800000)
+#define S5PV310_PA_COREPERI 0x10500000
+#define S5PV310_PA_GIC_CPU 0x10500100
+#define S5PV310_PA_TWD 0x10500600
+#define S5PV310_PA_GIC_DIST 0x10501000
+#define S5PV310_PA_L2CC 0x10502000
-#define S5P_PA_UART(x) (S5PV310_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0 S5P_PA_UART(0)
-#define S5P_PA_UART1 S5P_PA_UART(1)
-#define S5P_PA_UART2 S5P_PA_UART(2)
-#define S5P_PA_UART3 S5P_PA_UART(3)
-#define S5P_PA_UART4 S5P_PA_UART(4)
-
-#define S5P_SZ_UART SZ_256
-
-#define S5PV310_PA_IIC(x) (0x13860000 + ((x) * 0x10000))
-
-#define S5PV310_PA_TIMER (0x139D0000)
-#define S5P_PA_TIMER S5PV310_PA_TIMER
-
-#define S5PV310_PA_SDRAM (0x40000000)
-#define S5P_PA_SDRAM S5PV310_PA_SDRAM
+#define S5PV310_PA_MDMA 0x10810000
+#define S5PV310_PA_PDMA0 0x12680000
+#define S5PV310_PA_PDMA1 0x12690000
#define S5PV310_PA_SYSMMU_MDMA 0x10A40000
#define S5PV310_PA_SYSMMU_SSS 0x10A50000
@@ -124,11 +77,32 @@
#define S5PV310_PA_SYSMMU_TV 0x12E20000
#define S5PV310_PA_SYSMMU_MFC_L 0x13620000
#define S5PV310_PA_SYSMMU_MFC_R 0x13630000
-#define S5PV310_SYSMMU_TOTAL_IPNUM 16
-#define S5P_SYSMMU_TOTAL_IPNUM S5PV310_SYSMMU_TOTAL_IPNUM
-/* compatibiltiy defines. */
-#define S3C_PA_UART S5PV310_PA_UART
+#define S5PV310_PA_GPIO1 0x11400000
+#define S5PV310_PA_GPIO2 0x11000000
+#define S5PV310_PA_GPIO3 0x03860000
+
+#define S5PV310_PA_MIPI_CSIS0 0x11880000
+#define S5PV310_PA_MIPI_CSIS1 0x11890000
+
+#define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000))
+
+#define S5PV310_PA_SROMC 0x12570000
+
+#define S5PV310_PA_UART 0x13800000
+
+#define S5PV310_PA_IIC(x) (0x13860000 + ((x) * 0x10000))
+
+#define S5PV310_PA_AC97 0x139A0000
+
+#define S5PV310_PA_TIMER 0x139D0000
+
+#define S5PV310_PA_SDRAM 0x40000000
+
+#define S5PV310_PA_SPDIF 0xE1100000
+
+/* Compatibiltiy Defines */
+
#define S3C_PA_HSMMC0 S5PV310_PA_HSMMC(0)
#define S3C_PA_HSMMC1 S5PV310_PA_HSMMC(1)
#define S3C_PA_HSMMC2 S5PV310_PA_HSMMC(2)
@@ -143,7 +117,28 @@
#define S3C_PA_IIC7 S5PV310_PA_IIC(7)
#define S3C_PA_RTC S5PV310_PA_RTC
#define S3C_PA_WDT S5PV310_PA_WATCHDOG
+
+#define S5P_PA_CHIPID S5PV310_PA_CHIPID
#define S5P_PA_MIPI_CSIS0 S5PV310_PA_MIPI_CSIS0
#define S5P_PA_MIPI_CSIS1 S5PV310_PA_MIPI_CSIS1
+#define S5P_PA_ONENAND S5PC210_PA_ONENAND
+#define S5P_PA_ONENAND_DMA S5PC210_PA_ONENAND_DMA
+#define S5P_PA_SDRAM S5PV310_PA_SDRAM
+#define S5P_PA_SROMC S5PV310_PA_SROMC
+#define S5P_PA_SYSCON S5PV310_PA_SYSCON
+#define S5P_PA_TIMER S5PV310_PA_TIMER
+
+/* UART */
+
+#define S3C_PA_UART S5PV310_PA_UART
+
+#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0 S5P_PA_UART(0)
+#define S5P_PA_UART1 S5P_PA_UART(1)
+#define S5P_PA_UART2 S5P_PA_UART(2)
+#define S5P_PA_UART3 S5P_PA_UART(3)
+#define S5P_PA_UART4 S5P_PA_UART(4)
+
+#define S5P_SZ_UART SZ_256
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/sysmmu.h b/arch/arm/mach-s5pv310/include/mach/sysmmu.h
index 662fe85ff4d..598fc5c9211 100644
--- a/arch/arm/mach-s5pv310/include/mach/sysmmu.h
+++ b/arch/arm/mach-s5pv310/include/mach/sysmmu.h
@@ -13,6 +13,9 @@
#ifndef __ASM_ARM_ARCH_SYSMMU_H
#define __ASM_ARM_ARCH_SYSMMU_H __FILE__
+#define S5PV310_SYSMMU_TOTAL_IPNUM 16
+#define S5P_SYSMMU_TOTAL_IPNUM S5PV310_SYSMMU_TOTAL_IPNUM
+
enum s5pv310_sysmmu_ips {
SYSMMU_MDMA,
SYSMMU_SSS,
@@ -32,7 +35,7 @@ enum s5pv310_sysmmu_ips {
SYSMMU_MFC_R,
};
-static char *sysmmu_ips_name[S5P_SYSMMU_TOTAL_IPNUM] = {
+static char *sysmmu_ips_name[S5PV310_SYSMMU_TOTAL_IPNUM] = {
"SYSMMU_MDMA" ,
"SYSMMU_SSS" ,
"SYSMMU_FIMC0" ,
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index d43c5ef58eb..bd3e1bfdd6a 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -241,6 +241,9 @@ static struct locomo_platform_data locomo_info = {
struct platform_device collie_locomo_device = {
.name = "locomo",
.id = 0,
+ .dev = {
+ .platform_data = &locomo_info,
+ },
.num_resources = ARRAY_SIZE(locomo_resources),
.resource = locomo_resources,
};
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index ab9fc4470d3..c4661aab22f 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -32,8 +32,7 @@
#include <asm/system.h>
#include <asm/mach/time.h>
-extern void sa1100_cpu_suspend(void);
-extern void sa1100_cpu_resume(void);
+extern void sa1100_cpu_suspend(long);
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
@@ -73,10 +72,10 @@ static int sa11x0_pm_enter(suspend_state_t state)
RCSR = RCSR_HWR | RCSR_SWR | RCSR_WDR | RCSR_SMR;
/* set resume return address */
- PSPR = virt_to_phys(sa1100_cpu_resume);
+ PSPR = virt_to_phys(cpu_resume);
/* go zzz */
- sa1100_cpu_suspend();
+ sa1100_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET);
cpu_init();
@@ -115,11 +114,6 @@ static int sa11x0_pm_enter(suspend_state_t state)
return 0;
}
-unsigned long sleep_phys_sp(void *sp)
-{
- return virt_to_phys(sp);
-}
-
static const struct platform_suspend_ops sa11x0_pm_ops = {
.enter = sa11x0_pm_enter,
.valid = suspend_valid_only_mem,
diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S
index 80f31bad707..04f2a618d4e 100644
--- a/arch/arm/mach-sa1100/sleep.S
+++ b/arch/arm/mach-sa1100/sleep.S
@@ -20,12 +20,7 @@
#include <asm/assembler.h>
#include <mach/hardware.h>
-
-
.text
-
-
-
/*
* sa1100_cpu_suspend()
*
@@ -34,27 +29,10 @@
*/
ENTRY(sa1100_cpu_suspend)
-
stmfd sp!, {r4 - r12, lr} @ save registers on stack
-
- @ get coprocessor registers
- mrc p15, 0, r4, c3, c0, 0 @ domain ID
- mrc p15, 0, r5, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r6, c13, c0, 0 @ PID
- mrc p15, 0, r7, c1, c0, 0 @ control reg
-
- @ store them plus current virtual stack ptr on stack
- mov r8, sp
- stmfd sp!, {r4 - r8}
-
- @ preserve phys address of stack
- mov r0, sp
- bl sleep_phys_sp
- ldr r1, =sleep_save_sp
- str r0, [r1]
-
- @ clean data cache and invalidate WB
- bl v4wb_flush_kern_cache_all
+ mov r1, r0
+ ldr r3, =sa1100_cpu_resume @ return function
+ bl cpu_suspend
@ disable clock switching
mcr p15, 0, r1, c15, c2, 2
@@ -166,50 +144,8 @@ sa1110_sdram_controller_fix:
* cpu_sa1100_resume()
*
* entry point from bootloader into kernel during resume
- *
- * Note: Yes, part of the following code is located into the .data section.
- * This is to allow sleep_save_sp to be accessed with a relative load
- * while we can't rely on any MMU translation. We could have put
- * sleep_save_sp in the .text section as well, but some setups might
- * insist on it to be truly read-only.
*/
-
- .data
- .align 5
-ENTRY(sa1100_cpu_resume)
- mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
- msr cpsr_c, r0 @ set SVC, irqs off
-
- ldr r0, sleep_save_sp @ stack phys addr
- ldr r2, =resume_after_mmu @ its absolute virtual address
- ldmfd r0, {r4 - r7, sp} @ CP regs + virt stack ptr
-
- mov r1, #0
- mcr p15, 0, r1, c8, c7, 0 @ flush I+D TLBs
- mcr p15, 0, r1, c7, c7, 0 @ flush I&D cache
- mcr p15, 0, r1, c9, c0, 0 @ invalidate RB
- mcr p15, 0, r1, c9, c0, 5 @ allow user space to use RB
-
- mcr p15, 0, r4, c3, c0, 0 @ domain ID
- mcr p15, 0, r5, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r6, c13, c0, 0 @ PID
- b resume_turn_on_mmu @ cache align execution
-
.align 5
-resume_turn_on_mmu:
- mcr p15, 0, r7, c1, c0, 0 @ turn on MMU, caches, etc.
- nop
- mov pc, r2 @ jump to virtual addr
- nop
- nop
- nop
-
-sleep_save_sp:
- .word 0 @ preserve stack phys ptr here
-
- .text
-resume_after_mmu:
+sa1100_cpu_resume:
mcr p15, 0, r1, c15, c1, 2 @ enable clock switching
ldmfd sp!, {r4 - r12, pc} @ return to caller
-
-
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 2123b96b563..4303a86e6e3 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -454,6 +454,7 @@ static void __init ag5evm_init(void)
gpio_direction_output(GPIO_PORT217, 0);
mdelay(1);
gpio_set_value(GPIO_PORT217, 1);
+ mdelay(100);
/* LCD backlight controller */
gpio_request(GPIO_PORT235, NULL); /* RESET */
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 3cf0951caa2..81d6536552a 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -1303,7 +1303,7 @@ static void __init ap4evb_init(void)
lcdc_info.clock_source = LCDC_CLK_BUS;
lcdc_info.ch[0].interface_type = RGB18;
- lcdc_info.ch[0].clock_divider = 2;
+ lcdc_info.ch[0].clock_divider = 3;
lcdc_info.ch[0].flags = 0;
lcdc_info.ch[0].lcd_size_cfg.width = 152;
lcdc_info.ch[0].lcd_size_cfg.height = 91;
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index fb4213a4e15..1657eac5dde 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -303,7 +303,7 @@ static struct sh_mobile_lcdc_info lcdc_info = {
.lcd_cfg = mackerel_lcdc_modes,
.num_cfg = ARRAY_SIZE(mackerel_lcdc_modes),
.interface_type = RGB24,
- .clock_divider = 2,
+ .clock_divider = 3,
.flags = 0,
.lcd_size_cfg.width = 152,
.lcd_size_cfg.height = 91,
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index ddd4a1b775f..7e58904c1c8 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -263,7 +263,7 @@ static struct clk div6_clks[DIV6_NR] = {
};
enum { MSTP001,
- MSTP125, MSTP118, MSTP116, MSTP100,
+ MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
MSTP219,
MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
MSTP331, MSTP329, MSTP325, MSTP323, MSTP312,
@@ -275,6 +275,10 @@ enum { MSTP001,
static struct clk mstp_clks[MSTP_NR] = {
[MSTP001] = MSTP(&div4_clks[DIV4_HP], SMSTPCR0, 1, 0), /* IIC2 */
+ [MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* CEU1 */
+ [MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* CSI2-RX1 */
+ [MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU0 */
+ [MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2-RX0 */
[MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
[MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX0 */
[MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
@@ -306,6 +310,9 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("r_clk", &r_clk),
/* DIV6 clocks */
+ CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
+ CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
+ CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
CLKDEV_ICK_ID("dsi0p_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
@@ -313,11 +320,15 @@ static struct clk_lookup lookups[] = {
/* MSTP32 clocks */
CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
- CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
+ CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP129]), /* CEU1 */
+ CLKDEV_DEV_ID("sh-mobile-csi2.1", &mstp_clks[MSTP128]), /* CSI2-RX1 */
+ CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU0 */
+ CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2-RX0 */
CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */
CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */
- CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
+ CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
+ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
diff --git a/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt b/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt
index efd3687ba19..3029aba3868 100644
--- a/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt
+++ b/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt
@@ -6,13 +6,10 @@ LIST "RWT Setting"
EW 0xE6020004, 0xA500
EW 0xE6030004, 0xA500
-DD 0x01001000, 0x01001000
-
LIST "GPIO Setting"
EB 0xE6051013, 0xA2
LIST "CPG"
-ED 0xE6150080, 0x00000180
ED 0xE61500C0, 0x00000002
WAIT 1, 0xFE40009C
@@ -37,6 +34,9 @@ ED 0xE615002C, 0x93000040
WAIT 1, 0xFE40009C
+LIST "SUB/USBClk"
+ED 0xE6150080, 0x00000180
+
LIST "BSC"
ED 0xFEC10000, 0x00E0001B
@@ -53,7 +53,7 @@ ED 0xFE400048, 0x20C18505
ED 0xFE40004C, 0x00110209
ED 0xFE400010, 0x00000087
-WAIT 10, 0xFE40009C
+WAIT 30, 0xFE40009C
ED 0xFE400084, 0x0000003F
EB 0xFE500000, 0x00
@@ -84,7 +84,7 @@ ED 0xE6150004, 0x80331050
WAIT 1, 0xFE40009C
-ED 0xE6150354, 0x00000002
+ED 0xFE400354, 0x01AD8002
LIST "SCIF0 - Serial port for earlyprintk"
EB 0xE6053098, 0x11
diff --git a/arch/arm/mach-shmobile/include/mach/head-mackerel.txt b/arch/arm/mach-shmobile/include/mach/head-mackerel.txt
index efd3687ba19..3029aba3868 100644
--- a/arch/arm/mach-shmobile/include/mach/head-mackerel.txt
+++ b/arch/arm/mach-shmobile/include/mach/head-mackerel.txt
@@ -6,13 +6,10 @@ LIST "RWT Setting"
EW 0xE6020004, 0xA500
EW 0xE6030004, 0xA500
-DD 0x01001000, 0x01001000
-
LIST "GPIO Setting"
EB 0xE6051013, 0xA2
LIST "CPG"
-ED 0xE6150080, 0x00000180
ED 0xE61500C0, 0x00000002
WAIT 1, 0xFE40009C
@@ -37,6 +34,9 @@ ED 0xE615002C, 0x93000040
WAIT 1, 0xFE40009C
+LIST "SUB/USBClk"
+ED 0xE6150080, 0x00000180
+
LIST "BSC"
ED 0xFEC10000, 0x00E0001B
@@ -53,7 +53,7 @@ ED 0xFE400048, 0x20C18505
ED 0xFE40004C, 0x00110209
ED 0xFE400010, 0x00000087
-WAIT 10, 0xFE40009C
+WAIT 30, 0xFE40009C
ED 0xFE400084, 0x0000003F
EB 0xFE500000, 0x00
@@ -84,7 +84,7 @@ ED 0xE6150004, 0x80331050
WAIT 1, 0xFE40009C
-ED 0xE6150354, 0x00000002
+ED 0xFE400354, 0x01AD8002
LIST "SCIF0 - Serial port for earlyprintk"
EB 0xE6053098, 0x11
diff --git a/arch/arm/mach-shmobile/include/mach/mmcif-ap4eb.h b/arch/arm/mach-shmobile/include/mach/mmcif-ap4eb.h
new file mode 100644
index 00000000000..a8d02be8d2b
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/mmcif-ap4eb.h
@@ -0,0 +1,29 @@
+#ifndef MMCIF_AP4EB_H
+#define MMCIF_AP4EB_H
+
+#define PORT185CR (void __iomem *)0xe60520b9
+#define PORT186CR (void __iomem *)0xe60520ba
+#define PORT187CR (void __iomem *)0xe60520bb
+#define PORT188CR (void __iomem *)0xe60520bc
+
+#define PORTR191_160DR (void __iomem *)0xe6056014
+
+static inline void mmcif_init_progress(void)
+{
+ /* Initialise LEDS1-4
+ * registers: PORT185CR-PORT188CR (LED1-LED4 Control)
+ * value: 0x10 - enable output
+ */
+ __raw_writeb(0x10, PORT185CR);
+ __raw_writeb(0x10, PORT186CR);
+ __raw_writeb(0x10, PORT187CR);
+ __raw_writeb(0x10, PORT188CR);
+}
+
+static inline void mmcif_update_progress(int n)
+{
+ __raw_writel((__raw_readl(PORTR191_160DR) & ~(0xf << 25)) |
+ (1 << (25 + n)), PORTR191_160DR);
+}
+
+#endif /* MMCIF_AP4EB_H */
diff --git a/arch/arm/mach-shmobile/include/mach/mmcif-mackerel.h b/arch/arm/mach-shmobile/include/mach/mmcif-mackerel.h
new file mode 100644
index 00000000000..4b4f6949a86
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/mmcif-mackerel.h
@@ -0,0 +1,39 @@
+#ifndef MMCIF_MACKEREL_H
+#define MMCIF_MACKEREL_H
+
+#define PORT0CR (void __iomem *)0xe6051000
+#define PORT1CR (void __iomem *)0xe6051001
+#define PORT2CR (void __iomem *)0xe6051002
+#define PORT159CR (void __iomem *)0xe605009f
+
+#define PORTR031_000DR (void __iomem *)0xe6055000
+#define PORTL159_128DR (void __iomem *)0xe6054010
+
+static inline void mmcif_init_progress(void)
+{
+ /* Initialise LEDS0-3
+ * registers: PORT0CR-PORT2CR,PORT159CR (LED0-LED3 Control)
+ * value: 0x10 - enable output
+ */
+ __raw_writeb(0x10, PORT0CR);
+ __raw_writeb(0x10, PORT1CR);
+ __raw_writeb(0x10, PORT2CR);
+ __raw_writeb(0x10, PORT159CR);
+}
+
+static inline void mmcif_update_progress(int n)
+{
+ unsigned a = 0, b = 0;
+
+ if (n < 3)
+ a = 1 << n;
+ else
+ b = 1 << 31;
+
+ __raw_writel((__raw_readl(PORTR031_000DR) & ~0x7) | a,
+ PORTR031_000DR);
+ __raw_writel((__raw_readl(PORTL159_128DR) & ~(1 << 31)) | b,
+ PORTL159_128DR);
+}
+
+#endif /* MMCIF_MACKEREL_H */
diff --git a/arch/arm/mach-shmobile/include/mach/mmcif.h b/arch/arm/mach-shmobile/include/mach/mmcif.h
new file mode 100644
index 00000000000..f4dc3279cf0
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/mmcif.h
@@ -0,0 +1,18 @@
+#ifndef MMCIF_H
+#define MMCIF_H
+
+/**************************************************
+ *
+ * board specific settings
+ *
+ **************************************************/
+
+#ifdef CONFIG_MACH_AP4EVB
+#include "mach/mmcif-ap4eb.h"
+#elif CONFIG_MACH_MACKEREL
+#include "mach/mmcif-mackerel.h"
+#else
+#error "unsupported board."
+#endif
+
+#endif /* MMCIF_H */
diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c
index 18febf92f20..98bc7edc95a 100644
--- a/arch/arm/mach-spear3xx/clock.c
+++ b/arch/arm/mach-spear3xx/clock.c
@@ -13,8 +13,8 @@
#include <linux/init.h>
#include <linux/kernel.h>
-#include <mach/misc_regs.h>
#include <plat/clock.h>
+#include <mach/misc_regs.h>
/* root clks */
/* 32 KHz oscillator clock */
@@ -39,18 +39,43 @@ static struct clk rtc_clk = {
};
/* clock derived from 24 MHz osc clk */
+/* pll masks structure */
+static struct pll_clk_masks pll1_masks = {
+ .mode_mask = PLL_MODE_MASK,
+ .mode_shift = PLL_MODE_SHIFT,
+ .norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
+ .norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
+ .dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
+ .dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
+ .div_p_mask = PLL_DIV_P_MASK,
+ .div_p_shift = PLL_DIV_P_SHIFT,
+ .div_n_mask = PLL_DIV_N_MASK,
+ .div_n_shift = PLL_DIV_N_SHIFT,
+};
+
/* pll1 configuration structure */
static struct pll_clk_config pll1_config = {
.mode_reg = PLL1_CTR,
.cfg_reg = PLL1_FRQ,
+ .masks = &pll1_masks,
+};
+
+/* pll rate configuration table, in ascending order of rates */
+struct pll_rate_tbl pll_rtbl[] = {
+ {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
+ {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
};
/* PLL1 clock */
static struct clk pll1_clk = {
+ .flags = ENABLED_ON_INIT,
.pclk = &osc_24m_clk,
.en_reg = PLL1_CTR,
.en_reg_bit = PLL_ENABLE,
- .recalc = &pll1_clk_recalc,
+ .calc_rate = &pll_calc_rate,
+ .recalc = &pll_clk_recalc,
+ .set_rate = &pll_clk_set_rate,
+ .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
.private_data = &pll1_config,
};
@@ -76,36 +101,83 @@ static struct clk cpu_clk = {
.recalc = &follow_parent,
};
+/* ahb masks structure */
+static struct bus_clk_masks ahb_masks = {
+ .mask = PLL_HCLK_RATIO_MASK,
+ .shift = PLL_HCLK_RATIO_SHIFT,
+};
+
/* ahb configuration structure */
static struct bus_clk_config ahb_config = {
.reg = CORE_CLK_CFG,
- .mask = PLL_HCLK_RATIO_MASK,
- .shift = PLL_HCLK_RATIO_SHIFT,
+ .masks = &ahb_masks,
+};
+
+/* ahb rate configuration table, in ascending order of rates */
+struct bus_rate_tbl bus_rtbl[] = {
+ {.div = 3}, /* == parent divided by 4 */
+ {.div = 2}, /* == parent divided by 3 */
+ {.div = 1}, /* == parent divided by 2 */
+ {.div = 0}, /* == parent divided by 1 */
};
/* ahb clock */
static struct clk ahb_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll1_clk,
+ .calc_rate = &bus_calc_rate,
.recalc = &bus_clk_recalc,
+ .set_rate = &bus_clk_set_rate,
+ .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
.private_data = &ahb_config,
};
-/* uart configurations */
-static struct aux_clk_config uart_config = {
+/* auxiliary synthesizers masks */
+static struct aux_clk_masks aux_masks = {
+ .eq_sel_mask = AUX_EQ_SEL_MASK,
+ .eq_sel_shift = AUX_EQ_SEL_SHIFT,
+ .eq1_mask = AUX_EQ1_SEL,
+ .eq2_mask = AUX_EQ2_SEL,
+ .xscale_sel_mask = AUX_XSCALE_MASK,
+ .xscale_sel_shift = AUX_XSCALE_SHIFT,
+ .yscale_sel_mask = AUX_YSCALE_MASK,
+ .yscale_sel_shift = AUX_YSCALE_SHIFT,
+};
+
+/* uart synth configurations */
+static struct aux_clk_config uart_synth_config = {
.synth_reg = UART_CLK_SYNT,
+ .masks = &aux_masks,
+};
+
+/* aux rate configuration table, in ascending order of rates */
+struct aux_rate_tbl aux_rtbl[] = {
+ /* For PLL1 = 332 MHz */
+ {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
+ {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
+ {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
+};
+
+/* uart synth clock */
+static struct clk uart_synth_clk = {
+ .en_reg = UART_CLK_SYNT,
+ .en_reg_bit = AUX_SYNT_ENB,
+ .pclk = &pll1_clk,
+ .calc_rate = &aux_calc_rate,
+ .recalc = &aux_clk_recalc,
+ .set_rate = &aux_clk_set_rate,
+ .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
+ .private_data = &uart_synth_config,
};
/* uart parents */
static struct pclk_info uart_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &uart_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
@@ -123,25 +195,35 @@ static struct clk uart_clk = {
.en_reg_bit = UART_CLK_ENB,
.pclk_sel = &uart_pclk_sel,
.pclk_sel_shift = UART_CLK_SHIFT,
- .recalc = &aux_clk_recalc,
- .private_data = &uart_config,
+ .recalc = &follow_parent,
};
/* firda configurations */
-static struct aux_clk_config firda_config = {
+static struct aux_clk_config firda_synth_config = {
.synth_reg = FIRDA_CLK_SYNT,
+ .masks = &aux_masks,
+};
+
+/* firda synth clock */
+static struct clk firda_synth_clk = {
+ .en_reg = FIRDA_CLK_SYNT,
+ .en_reg_bit = AUX_SYNT_ENB,
+ .pclk = &pll1_clk,
+ .calc_rate = &aux_calc_rate,
+ .recalc = &aux_clk_recalc,
+ .set_rate = &aux_clk_set_rate,
+ .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
+ .private_data = &firda_synth_config,
};
/* firda parents */
static struct pclk_info firda_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &firda_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
@@ -159,73 +241,155 @@ static struct clk firda_clk = {
.en_reg_bit = FIRDA_CLK_ENB,
.pclk_sel = &firda_pclk_sel,
.pclk_sel_shift = FIRDA_CLK_SHIFT,
- .recalc = &aux_clk_recalc,
- .private_data = &firda_config,
+ .recalc = &follow_parent,
+};
+
+/* gpt synthesizer masks */
+static struct gpt_clk_masks gpt_masks = {
+ .mscale_sel_mask = GPT_MSCALE_MASK,
+ .mscale_sel_shift = GPT_MSCALE_SHIFT,
+ .nscale_sel_mask = GPT_NSCALE_MASK,
+ .nscale_sel_shift = GPT_NSCALE_SHIFT,
+};
+
+/* gpt rate configuration table, in ascending order of rates */
+struct gpt_rate_tbl gpt_rtbl[] = {
+ /* For pll1 = 332 MHz */
+ {.mscale = 4, .nscale = 0}, /* 41.5 MHz */
+ {.mscale = 2, .nscale = 0}, /* 55.3 MHz */
+ {.mscale = 1, .nscale = 0}, /* 83 MHz */
+};
+
+/* gpt0 synth clk config*/
+static struct gpt_clk_config gpt0_synth_config = {
+ .synth_reg = PRSC1_CLK_CFG,
+ .masks = &gpt_masks,
+};
+
+/* gpt synth clock */
+static struct clk gpt0_synth_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .calc_rate = &gpt_calc_rate,
+ .recalc = &gpt_clk_recalc,
+ .set_rate = &gpt_clk_set_rate,
+ .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+ .private_data = &gpt0_synth_config,
};
/* gpt parents */
-static struct pclk_info gpt_pclk_info[] = {
+static struct pclk_info gpt0_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &gpt0_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
/* gpt parent select structure */
-static struct pclk_sel gpt_pclk_sel = {
- .pclk_info = gpt_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt_pclk_info),
+static struct pclk_sel gpt0_pclk_sel = {
+ .pclk_info = gpt0_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = GPT_CLK_MASK,
};
-/* gpt0 configurations */
-static struct aux_clk_config gpt0_config = {
- .synth_reg = PRSC1_CLK_CFG,
-};
-
/* gpt0 timer clock */
static struct clk gpt0_clk = {
.flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel = &gpt0_pclk_sel,
.pclk_sel_shift = GPT0_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt0_config,
+ .recalc = &follow_parent,
};
-/* gpt1 configurations */
-static struct aux_clk_config gpt1_config = {
+/* gpt1 synth clk configurations */
+static struct gpt_clk_config gpt1_synth_config = {
.synth_reg = PRSC2_CLK_CFG,
+ .masks = &gpt_masks,
+};
+
+/* gpt1 synth clock */
+static struct clk gpt1_synth_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .calc_rate = &gpt_calc_rate,
+ .recalc = &gpt_clk_recalc,
+ .set_rate = &gpt_clk_set_rate,
+ .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+ .private_data = &gpt1_synth_config,
+};
+
+static struct pclk_info gpt1_pclk_info[] = {
+ {
+ .pclk = &gpt1_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
+ }, {
+ .pclk = &pll3_48m_clk,
+ .pclk_val = AUX_CLK_PLL3_VAL,
+ },
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt1_pclk_sel = {
+ .pclk_info = gpt1_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt1_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt1 timer clock */
static struct clk gpt1_clk = {
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = GPT1_CLK_ENB,
- .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel = &gpt1_pclk_sel,
.pclk_sel_shift = GPT1_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt1_config,
+ .recalc = &follow_parent,
};
-/* gpt2 configurations */
-static struct aux_clk_config gpt2_config = {
+/* gpt2 synth clk configurations */
+static struct gpt_clk_config gpt2_synth_config = {
.synth_reg = PRSC3_CLK_CFG,
+ .masks = &gpt_masks,
+};
+
+/* gpt1 synth clock */
+static struct clk gpt2_synth_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .calc_rate = &gpt_calc_rate,
+ .recalc = &gpt_clk_recalc,
+ .set_rate = &gpt_clk_set_rate,
+ .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+ .private_data = &gpt2_synth_config,
+};
+
+static struct pclk_info gpt2_pclk_info[] = {
+ {
+ .pclk = &gpt2_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
+ }, {
+ .pclk = &pll3_48m_clk,
+ .pclk_val = AUX_CLK_PLL3_VAL,
+ },
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt2_pclk_sel = {
+ .pclk_info = gpt2_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt2_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt2 timer clock */
static struct clk gpt2_clk = {
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = GPT2_CLK_ENB,
- .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel = &gpt2_pclk_sel,
.pclk_sel_shift = GPT2_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt2_config,
+ .recalc = &follow_parent,
};
/* clock derived from pll3 clk */
@@ -245,26 +409,27 @@ static struct clk usbd_clk = {
.recalc = &follow_parent,
};
-/* clcd clock */
-static struct clk clcd_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll3_48m_clk,
- .recalc = &follow_parent,
+/* clock derived from ahb clk */
+/* apb masks structure */
+static struct bus_clk_masks apb_masks = {
+ .mask = HCLK_PCLK_RATIO_MASK,
+ .shift = HCLK_PCLK_RATIO_SHIFT,
};
-/* clock derived from ahb clk */
/* apb configuration structure */
static struct bus_clk_config apb_config = {
.reg = CORE_CLK_CFG,
- .mask = HCLK_PCLK_RATIO_MASK,
- .shift = HCLK_PCLK_RATIO_SHIFT,
+ .masks = &apb_masks,
};
/* apb clock */
static struct clk apb_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &ahb_clk,
+ .calc_rate = &bus_calc_rate,
.recalc = &bus_clk_recalc,
+ .set_rate = &bus_clk_set_rate,
+ .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
.private_data = &apb_config,
};
@@ -325,8 +490,17 @@ static struct clk adc_clk = {
.recalc = &follow_parent,
};
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+/* emi clock */
+static struct clk emi_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &ahb_clk,
+ .recalc = &follow_parent,
+};
+#endif
+
/* ssp clock */
-static struct clk ssp_clk = {
+static struct clk ssp0_clk = {
.pclk = &apb_clk,
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = SSP_CLK_ENB,
@@ -343,14 +517,145 @@ static struct clk gpio_clk = {
static struct clk dummy_apb_pclk;
+#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \
+ defined(CONFIG_MACH_SPEAR320)
+/* fsmc clock */
+static struct clk fsmc_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &ahb_clk,
+ .recalc = &follow_parent,
+};
+#endif
+
+/* common clocks to spear310 and spear320 */
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+/* uart1 clock */
+static struct clk uart1_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* uart2 clock */
+static struct clk uart2_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
+
+/* common clocks to spear300 and spear320 */
+#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
+/* clcd clock */
+static struct clk clcd_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll3_48m_clk,
+ .recalc = &follow_parent,
+};
+
+/* sdhci clock */
+static struct clk sdhci_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &ahb_clk,
+ .recalc = &follow_parent,
+};
+#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
+
+/* spear300 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR300
+/* gpio1 clock */
+static struct clk gpio1_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* keyboard clock */
+static struct clk kbd_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+#endif
+
+/* spear310 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR310
+/* uart3 clock */
+static struct clk uart3_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* uart4 clock */
+static struct clk uart4_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* uart5 clock */
+static struct clk uart5_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+#endif
+
+/* spear320 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR320
+/* can0 clock */
+static struct clk can0_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* can1 clock */
+static struct clk can1_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* i2c1 clock */
+static struct clk i2c1_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &ahb_clk,
+ .recalc = &follow_parent,
+};
+
+/* ssp1 clock */
+static struct clk ssp1_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* ssp2 clock */
+static struct clk ssp2_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* pwm clock */
+static struct clk pwm_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+#endif
+
/* array of all spear 3xx clock lookups */
static struct clk_lookup spear_clk_lookups[] = {
- { .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
+ { .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
/* root clks */
{ .con_id = "osc_32k_clk", .clk = &osc_32k_clk},
{ .con_id = "osc_24m_clk", .clk = &osc_24m_clk},
/* clock derived from 32 KHz osc clk */
- { .dev_id = "rtc", .clk = &rtc_clk},
+ { .dev_id = "rtc-spear", .clk = &rtc_clk},
/* clock derived from 24 MHz osc clk */
{ .con_id = "pll1_clk", .clk = &pll1_clk},
{ .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk},
@@ -358,18 +663,22 @@ static struct clk_lookup spear_clk_lookups[] = {
/* clock derived from pll1 clk */
{ .con_id = "cpu_clk", .clk = &cpu_clk},
{ .con_id = "ahb_clk", .clk = &ahb_clk},
+ { .con_id = "uart_synth_clk", .clk = &uart_synth_clk},
+ { .con_id = "firda_synth_clk", .clk = &firda_synth_clk},
+ { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk},
+ { .con_id = "gpt1_synth_clk", .clk = &gpt1_synth_clk},
+ { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk},
{ .dev_id = "uart", .clk = &uart_clk},
{ .dev_id = "firda", .clk = &firda_clk},
{ .dev_id = "gpt0", .clk = &gpt0_clk},
{ .dev_id = "gpt1", .clk = &gpt1_clk},
{ .dev_id = "gpt2", .clk = &gpt2_clk},
/* clock derived from pll3 clk */
- { .dev_id = "usbh", .clk = &usbh_clk},
- { .dev_id = "usbd", .clk = &usbd_clk},
- { .dev_id = "clcd", .clk = &clcd_clk},
+ { .dev_id = "designware_udc", .clk = &usbd_clk},
+ { .con_id = "usbh_clk", .clk = &usbh_clk},
/* clock derived from ahb clk */
{ .con_id = "apb_clk", .clk = &apb_clk},
- { .dev_id = "i2c", .clk = &i2c_clk},
+ { .dev_id = "i2c_designware.0", .clk = &i2c_clk},
{ .dev_id = "dma", .clk = &dma_clk},
{ .dev_id = "jpeg", .clk = &jpeg_clk},
{ .dev_id = "gmac", .clk = &gmac_clk},
@@ -377,8 +686,50 @@ static struct clk_lookup spear_clk_lookups[] = {
{ .dev_id = "c3", .clk = &c3_clk},
/* clock derived from apb clk */
{ .dev_id = "adc", .clk = &adc_clk},
- { .dev_id = "ssp", .clk = &ssp_clk},
+ { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk},
{ .dev_id = "gpio", .clk = &gpio_clk},
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+ { .dev_id = "physmap-flash", .clk = &emi_clk},
+#endif
+#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \
+ defined(CONFIG_MACH_SPEAR320)
+ { .con_id = "fsmc", .clk = &fsmc_clk},
+#endif
+
+/* common clocks to spear310 and spear320 */
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+ { .dev_id = "uart1", .clk = &uart1_clk},
+ { .dev_id = "uart2", .clk = &uart2_clk},
+#endif
+
+ /* common clock to spear300 and spear320 */
+#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
+ { .dev_id = "clcd", .clk = &clcd_clk},
+ { .dev_id = "sdhci", .clk = &sdhci_clk},
+#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
+
+ /* spear300 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR300
+ { .dev_id = "gpio1", .clk = &gpio1_clk},
+ { .dev_id = "keyboard", .clk = &kbd_clk},
+#endif
+
+ /* spear310 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR310
+ { .dev_id = "uart3", .clk = &uart3_clk},
+ { .dev_id = "uart4", .clk = &uart4_clk},
+ { .dev_id = "uart5", .clk = &uart5_clk},
+
+#endif
+ /* spear320 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR320
+ { .dev_id = "c_can_platform.0", .clk = &can0_clk},
+ { .dev_id = "c_can_platform.1", .clk = &can1_clk},
+ { .dev_id = "i2c_designware.1", .clk = &i2c1_clk},
+ { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk},
+ { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk},
+ { .dev_id = "pwm", .clk = &pwm_clk},
+#endif
};
void __init clk_init(void)
diff --git a/arch/arm/mach-spear3xx/include/mach/entry-macro.S b/arch/arm/mach-spear3xx/include/mach/entry-macro.S
index 947625d6b48..53da4224ba3 100644
--- a/arch/arm/mach-spear3xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-spear3xx/include/mach/entry-macro.S
@@ -11,9 +11,8 @@
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <mach/spear.h>
#include <asm/hardware/vic.h>
+#include <mach/hardware.h>
.macro disable_fiq
.endm
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index af7e02c909a..8e30636909e 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -14,11 +14,11 @@
#ifndef __MACH_GENERIC_H
#define __MACH_GENERIC_H
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
#include <plat/padmux.h>
/* spear3xx declarations */
@@ -33,14 +33,14 @@
/* Add spear3xx family device structure declarations here */
extern struct amba_device gpio_device;
extern struct amba_device uart_device;
-extern struct sys_timer spear_sys_timer;
+extern struct sys_timer spear3xx_timer;
/* Add spear3xx family function declarations here */
void __init clk_init(void);
+void __init spear_setup_timer(void);
void __init spear3xx_map_io(void);
void __init spear3xx_init_irq(void);
void __init spear3xx_init(void);
-void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size);
/* pad mux declarations */
#define PMX_FIRDA_MASK (1 << 14)
@@ -129,12 +129,10 @@ extern struct pmx_dev pmx_telecom_camera;
extern struct pmx_dev pmx_telecom_dac;
extern struct pmx_dev pmx_telecom_i2s;
extern struct pmx_dev pmx_telecom_boot_pins;
-extern struct pmx_dev pmx_telecom_sdio_4bit;
-extern struct pmx_dev pmx_telecom_sdio_8bit;
+extern struct pmx_dev pmx_telecom_sdhci_4bit;
+extern struct pmx_dev pmx_telecom_sdhci_8bit;
extern struct pmx_dev pmx_gpio1;
-void spear300_pmx_init(void);
-
/* Add spear300 machine function declarations here */
void __init spear300_init(void);
@@ -154,8 +152,6 @@ extern struct pmx_dev pmx_fsmc;
extern struct pmx_dev pmx_rs485_0_1;
extern struct pmx_dev pmx_tdm0;
-void spear310_pmx_init(void);
-
/* Add spear310 machine function declarations here */
void __init spear310_init(void);
@@ -176,14 +172,14 @@ extern struct pmx_dev pmx_clcd;
extern struct pmx_dev pmx_emi;
extern struct pmx_dev pmx_fsmc;
extern struct pmx_dev pmx_spp;
-extern struct pmx_dev pmx_sdio;
+extern struct pmx_dev pmx_sdhci;
extern struct pmx_dev pmx_i2s;
extern struct pmx_dev pmx_uart1;
extern struct pmx_dev pmx_uart1_modem;
extern struct pmx_dev pmx_uart2;
extern struct pmx_dev pmx_touchscreen;
extern struct pmx_dev pmx_can;
-extern struct pmx_dev pmx_sdio_led;
+extern struct pmx_dev pmx_sdhci_led;
extern struct pmx_dev pmx_pwm0;
extern struct pmx_dev pmx_pwm1;
extern struct pmx_dev pmx_pwm2;
@@ -195,8 +191,6 @@ extern struct pmx_dev pmx_smii0;
extern struct pmx_dev pmx_smii1;
extern struct pmx_dev pmx_i2c1;
-void spear320_pmx_init(void);
-
/* Add spear320 machine function declarations here */
void __init spear320_init(void);
diff --git a/arch/arm/mach-spear3xx/include/mach/hardware.h b/arch/arm/mach-spear3xx/include/mach/hardware.h
index 4a86e6a3c44..4660c0d8ec0 100644
--- a/arch/arm/mach-spear3xx/include/mach/hardware.h
+++ b/arch/arm/mach-spear3xx/include/mach/hardware.h
@@ -14,6 +14,9 @@
#ifndef __MACH_HARDWARE_H
#define __MACH_HARDWARE_H
+#include <plat/hardware.h>
+#include <mach/spear.h>
+
/* Vitual to physical translation of statically mapped space */
#define IO_ADDRESS(x) (x | 0xF0000000)
diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h
index 7f940b81847..a1a7f481866 100644
--- a/arch/arm/mach-spear3xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear3xx/include/mach/irqs.h
@@ -69,7 +69,7 @@
#define IRQ_CLCD IRQ_GEN_RAS_3
/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define IRQ_SDIO IRQ_INTRCOMM_RAS_ARM
+#define IRQ_SDHCI IRQ_INTRCOMM_RAS_ARM
/* GPIO pins virtual irqs */
#define SPEAR_GPIO_INT_BASE (VIRQ_START + 9)
@@ -115,7 +115,7 @@
#define VIRQ_SPP (VIRQ_START + 2)
/* IRQs sharing IRQ_GEN_RAS_2 */
-#define IRQ_SDIO IRQ_GEN_RAS_2
+#define IRQ_SDHCI IRQ_GEN_RAS_2
/* IRQs sharing IRQ_GEN_RAS_3 */
#define VIRQ_PLGPIO (VIRQ_START + 3)
diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
index 38d767a1aba..5bd8cd8d485 100644
--- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
@@ -14,16 +14,16 @@
#ifndef __MACH_MISC_REGS_H
#define __MACH_MISC_REGS_H
-#include <mach/spear.h>
+#include <mach/hardware.h>
-#define MISC_BASE VA_SPEAR3XX_ICM3_MISC_REG_BASE
+#define MISC_BASE IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE)
-#define SOC_CFG_CTR ((unsigned int *)(MISC_BASE + 0x000))
-#define DIAG_CFG_CTR ((unsigned int *)(MISC_BASE + 0x004))
-#define PLL1_CTR ((unsigned int *)(MISC_BASE + 0x008))
-#define PLL1_FRQ ((unsigned int *)(MISC_BASE + 0x00C))
-#define PLL1_MOD ((unsigned int *)(MISC_BASE + 0x010))
-#define PLL2_CTR ((unsigned int *)(MISC_BASE + 0x014))
+#define SOC_CFG_CTR (MISC_BASE + 0x000)
+#define DIAG_CFG_CTR (MISC_BASE + 0x004)
+#define PLL1_CTR (MISC_BASE + 0x008)
+#define PLL1_FRQ (MISC_BASE + 0x00C)
+#define PLL1_MOD (MISC_BASE + 0x010)
+#define PLL2_CTR (MISC_BASE + 0x014)
/* PLL_CTR register masks */
#define PLL_ENABLE 2
#define PLL_MODE_SHIFT 4
@@ -33,7 +33,7 @@
#define PLL_MODE_DITH_DSB 2
#define PLL_MODE_DITH_SSB 3
-#define PLL2_FRQ ((unsigned int *)(MISC_BASE + 0x018))
+#define PLL2_FRQ (MISC_BASE + 0x018)
/* PLL FRQ register masks */
#define PLL_DIV_N_SHIFT 0
#define PLL_DIV_N_MASK 0xFF
@@ -44,16 +44,16 @@
#define PLL_DITH_FDBK_M_SHIFT 16
#define PLL_DITH_FDBK_M_MASK 0xFFFF
-#define PLL2_MOD ((unsigned int *)(MISC_BASE + 0x01C))
-#define PLL_CLK_CFG ((unsigned int *)(MISC_BASE + 0x020))
-#define CORE_CLK_CFG ((unsigned int *)(MISC_BASE + 0x024))
+#define PLL2_MOD (MISC_BASE + 0x01C)
+#define PLL_CLK_CFG (MISC_BASE + 0x020)
+#define CORE_CLK_CFG (MISC_BASE + 0x024)
/* CORE CLK CFG register masks */
#define PLL_HCLK_RATIO_SHIFT 10
#define PLL_HCLK_RATIO_MASK 0x3
#define HCLK_PCLK_RATIO_SHIFT 8
#define HCLK_PCLK_RATIO_MASK 0x3
-#define PERIP_CLK_CFG ((unsigned int *)(MISC_BASE + 0x028))
+#define PERIP_CLK_CFG (MISC_BASE + 0x028)
/* PERIP_CLK_CFG register masks */
#define UART_CLK_SHIFT 4
#define UART_CLK_MASK 0x1
@@ -63,10 +63,10 @@
#define GPT1_CLK_SHIFT 11
#define GPT2_CLK_SHIFT 12
#define GPT_CLK_MASK 0x1
-#define AUX_CLK_PLL3_MASK 0
-#define AUX_CLK_PLL1_MASK 1
+#define AUX_CLK_PLL3_VAL 0
+#define AUX_CLK_PLL1_VAL 1
-#define PERIP1_CLK_ENB ((unsigned int *)(MISC_BASE + 0x02C))
+#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
/* PERIP1_CLK_ENB register masks */
#define UART_CLK_ENB 3
#define SSP_CLK_ENB 5
@@ -85,34 +85,35 @@
#define USBH_CLK_ENB 25
#define C3_CLK_ENB 31
-#define SOC_CORE_ID ((unsigned int *)(MISC_BASE + 0x030))
-#define RAS_CLK_ENB ((unsigned int *)(MISC_BASE + 0x034))
-#define PERIP1_SOF_RST ((unsigned int *)(MISC_BASE + 0x038))
+#define SOC_CORE_ID (MISC_BASE + 0x030)
+#define RAS_CLK_ENB (MISC_BASE + 0x034)
+#define PERIP1_SOF_RST (MISC_BASE + 0x038)
/* PERIP1_SOF_RST register masks */
#define JPEG_SOF_RST 8
-#define SOC_USER_ID ((unsigned int *)(MISC_BASE + 0x03C))
-#define RAS_SOF_RST ((unsigned int *)(MISC_BASE + 0x040))
-#define PRSC1_CLK_CFG ((unsigned int *)(MISC_BASE + 0x044))
-#define PRSC2_CLK_CFG ((unsigned int *)(MISC_BASE + 0x048))
-#define PRSC3_CLK_CFG ((unsigned int *)(MISC_BASE + 0x04C))
+#define SOC_USER_ID (MISC_BASE + 0x03C)
+#define RAS_SOF_RST (MISC_BASE + 0x040)
+#define PRSC1_CLK_CFG (MISC_BASE + 0x044)
+#define PRSC2_CLK_CFG (MISC_BASE + 0x048)
+#define PRSC3_CLK_CFG (MISC_BASE + 0x04C)
/* gpt synthesizer register masks */
#define GPT_MSCALE_SHIFT 0
#define GPT_MSCALE_MASK 0xFFF
#define GPT_NSCALE_SHIFT 12
#define GPT_NSCALE_MASK 0xF
-#define AMEM_CLK_CFG ((unsigned int *)(MISC_BASE + 0x050))
-#define EXPI_CLK_CFG ((unsigned int *)(MISC_BASE + 0x054))
-#define CLCD_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x05C))
-#define FIRDA_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x060))
-#define UART_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x064))
-#define GMAC_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x068))
-#define RAS1_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x06C))
-#define RAS2_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x070))
-#define RAS3_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x074))
-#define RAS4_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x078))
+#define AMEM_CLK_CFG (MISC_BASE + 0x050)
+#define EXPI_CLK_CFG (MISC_BASE + 0x054)
+#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
+#define UART_CLK_SYNT (MISC_BASE + 0x064)
+#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
+#define RAS1_CLK_SYNT (MISC_BASE + 0x06C)
+#define RAS2_CLK_SYNT (MISC_BASE + 0x070)
+#define RAS3_CLK_SYNT (MISC_BASE + 0x074)
+#define RAS4_CLK_SYNT (MISC_BASE + 0x078)
/* aux clk synthesiser register masks for irda to ras4 */
+#define AUX_SYNT_ENB 31
#define AUX_EQ_SEL_SHIFT 30
#define AUX_EQ_SEL_MASK 1
#define AUX_EQ1_SEL 0
@@ -122,42 +123,42 @@
#define AUX_YSCALE_SHIFT 0
#define AUX_YSCALE_MASK 0xFFF
-#define ICM1_ARB_CFG ((unsigned int *)(MISC_BASE + 0x07C))
-#define ICM2_ARB_CFG ((unsigned int *)(MISC_BASE + 0x080))
-#define ICM3_ARB_CFG ((unsigned int *)(MISC_BASE + 0x084))
-#define ICM4_ARB_CFG ((unsigned int *)(MISC_BASE + 0x088))
-#define ICM5_ARB_CFG ((unsigned int *)(MISC_BASE + 0x08C))
-#define ICM6_ARB_CFG ((unsigned int *)(MISC_BASE + 0x090))
-#define ICM7_ARB_CFG ((unsigned int *)(MISC_BASE + 0x094))
-#define ICM8_ARB_CFG ((unsigned int *)(MISC_BASE + 0x098))
-#define ICM9_ARB_CFG ((unsigned int *)(MISC_BASE + 0x09C))
-#define DMA_CHN_CFG ((unsigned int *)(MISC_BASE + 0x0A0))
-#define USB2_PHY_CFG ((unsigned int *)(MISC_BASE + 0x0A4))
-#define GMAC_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0A8))
-#define EXPI_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0AC))
-#define PRC1_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C0))
-#define PRC2_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C4))
-#define PRC3_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C8))
-#define PRC4_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0CC))
-#define PRC1_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D0))
-#define PRC2_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D4))
-#define PRC3_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D8))
-#define PRC4_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0DC))
-#define PWRDOWN_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0E0))
-#define COMPSSTL_1V8_CFG ((unsigned int *)(MISC_BASE + 0x0E4))
-#define COMPSSTL_2V5_CFG ((unsigned int *)(MISC_BASE + 0x0E8))
-#define COMPCOR_3V3_CFG ((unsigned int *)(MISC_BASE + 0x0EC))
-#define SSTLPAD_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F0))
-#define BIST1_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F4))
-#define BIST2_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F8))
-#define BIST3_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0FC))
-#define BIST4_CFG_CTR ((unsigned int *)(MISC_BASE + 0x100))
-#define BIST5_CFG_CTR ((unsigned int *)(MISC_BASE + 0x104))
-#define BIST1_STS_RES ((unsigned int *)(MISC_BASE + 0x108))
-#define BIST2_STS_RES ((unsigned int *)(MISC_BASE + 0x10C))
-#define BIST3_STS_RES ((unsigned int *)(MISC_BASE + 0x110))
-#define BIST4_STS_RES ((unsigned int *)(MISC_BASE + 0x114))
-#define BIST5_STS_RES ((unsigned int *)(MISC_BASE + 0x118))
-#define SYSERR_CFG_CTR ((unsigned int *)(MISC_BASE + 0x11C))
+#define ICM1_ARB_CFG (MISC_BASE + 0x07C)
+#define ICM2_ARB_CFG (MISC_BASE + 0x080)
+#define ICM3_ARB_CFG (MISC_BASE + 0x084)
+#define ICM4_ARB_CFG (MISC_BASE + 0x088)
+#define ICM5_ARB_CFG (MISC_BASE + 0x08C)
+#define ICM6_ARB_CFG (MISC_BASE + 0x090)
+#define ICM7_ARB_CFG (MISC_BASE + 0x094)
+#define ICM8_ARB_CFG (MISC_BASE + 0x098)
+#define ICM9_ARB_CFG (MISC_BASE + 0x09C)
+#define DMA_CHN_CFG (MISC_BASE + 0x0A0)
+#define USB2_PHY_CFG (MISC_BASE + 0x0A4)
+#define GMAC_CFG_CTR (MISC_BASE + 0x0A8)
+#define EXPI_CFG_CTR (MISC_BASE + 0x0AC)
+#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0)
+#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4)
+#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8)
+#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC)
+#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0)
+#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4)
+#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8)
+#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC)
+#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0)
+#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4)
+#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8)
+#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC)
+#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0)
+#define BIST1_CFG_CTR (MISC_BASE + 0x0F4)
+#define BIST2_CFG_CTR (MISC_BASE + 0x0F8)
+#define BIST3_CFG_CTR (MISC_BASE + 0x0FC)
+#define BIST4_CFG_CTR (MISC_BASE + 0x100)
+#define BIST5_CFG_CTR (MISC_BASE + 0x104)
+#define BIST1_STS_RES (MISC_BASE + 0x108)
+#define BIST2_STS_RES (MISC_BASE + 0x10C)
+#define BIST3_STS_RES (MISC_BASE + 0x110)
+#define BIST4_STS_RES (MISC_BASE + 0x114)
+#define BIST5_STS_RES (MISC_BASE + 0x118)
+#define SYSERR_CFG_CTR (MISC_BASE + 0x11C)
#endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h
index dcca8568a48..63fd9835691 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear.h
@@ -14,124 +14,61 @@
#ifndef __MACH_SPEAR3XX_H
#define __MACH_SPEAR3XX_H
-#include <mach/hardware.h>
+#include <asm/memory.h>
#include <mach/spear300.h>
#include <mach/spear310.h>
#include <mach/spear320.h>
-#define SPEAR3XX_ML_SDRAM_BASE 0x00000000
-#define SPEAR3XX_ML_SDRAM_SIZE 0x40000000
+#define SPEAR3XX_ML_SDRAM_BASE UL(0x00000000)
-#define SPEAR3XX_ICM9_BASE 0xC0000000
-#define SPEAR3XX_ICM9_SIZE 0x10000000
+#define SPEAR3XX_ICM9_BASE UL(0xC0000000)
/* ICM1 - Low speed connection */
-#define SPEAR3XX_ICM1_2_BASE 0xD0000000
-#define SPEAR3XX_ICM1_2_SIZE 0x10000000
-
-#define SPEAR3XX_ICM1_UART_BASE 0xD0000000
+#define SPEAR3XX_ICM1_2_BASE UL(0xD0000000)
+#define SPEAR3XX_ICM1_UART_BASE UL(0xD0000000)
#define VA_SPEAR3XX_ICM1_UART_BASE IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE)
-#define SPEAR3XX_ICM1_UART_SIZE 0x00080000
-
-#define SPEAR3XX_ICM1_ADC_BASE 0xD0080000
-#define SPEAR3XX_ICM1_ADC_SIZE 0x00080000
-
-#define SPEAR3XX_ICM1_SSP_BASE 0xD0100000
-#define SPEAR3XX_ICM1_SSP_SIZE 0x00080000
-
-#define SPEAR3XX_ICM1_I2C_BASE 0xD0180000
-#define SPEAR3XX_ICM1_I2C_SIZE 0x00080000
-
-#define SPEAR3XX_ICM1_JPEG_BASE 0xD0800000
-#define SPEAR3XX_ICM1_JPEG_SIZE 0x00800000
-
-#define SPEAR3XX_ICM1_IRDA_BASE 0xD1000000
-#define SPEAR3XX_ICM1_IRDA_SIZE 0x00080000
-
-#define SPEAR3XX_ICM1_SRAM_BASE 0xD2800000
-#define SPEAR3XX_ICM1_SRAM_SIZE 0x05800000
+#define SPEAR3XX_ICM1_ADC_BASE UL(0xD0080000)
+#define SPEAR3XX_ICM1_SSP_BASE UL(0xD0100000)
+#define SPEAR3XX_ICM1_I2C_BASE UL(0xD0180000)
+#define SPEAR3XX_ICM1_JPEG_BASE UL(0xD0800000)
+#define SPEAR3XX_ICM1_IRDA_BASE UL(0xD1000000)
+#define SPEAR3XX_ICM1_SRAM_BASE UL(0xD2800000)
/* ICM2 - Application Subsystem */
-#define SPEAR3XX_ICM2_HWACCEL0_BASE 0xD8800000
-#define SPEAR3XX_ICM2_HWACCEL0_SIZE 0x00800000
-
-#define SPEAR3XX_ICM2_HWACCEL1_BASE 0xD9000000
-#define SPEAR3XX_ICM2_HWACCEL1_SIZE 0x00800000
+#define SPEAR3XX_ICM2_HWACCEL0_BASE UL(0xD8800000)
+#define SPEAR3XX_ICM2_HWACCEL1_BASE UL(0xD9000000)
/* ICM4 - High Speed Connection */
-#define SPEAR3XX_ICM4_BASE 0xE0000000
-#define SPEAR3XX_ICM4_SIZE 0x08000000
-
-#define SPEAR3XX_ICM4_MII_BASE 0xE0800000
-#define SPEAR3XX_ICM4_MII_SIZE 0x00800000
-
-#define SPEAR3XX_ICM4_USBD_FIFO_BASE 0xE1000000
-#define SPEAR3XX_ICM4_USBD_FIFO_SIZE 0x00100000
-
-#define SPEAR3XX_ICM4_USBD_CSR_BASE 0xE1100000
-#define SPEAR3XX_ICM4_USBD_CSR_SIZE 0x00100000
-
-#define SPEAR3XX_ICM4_USBD_PLDT_BASE 0xE1200000
-#define SPEAR3XX_ICM4_USBD_PLDT_SIZE 0x00100000
-
-#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE 0xE1800000
-#define SPEAR3XX_ICM4_USB_EHCI0_1_SIZE 0x00100000
-
-#define SPEAR3XX_ICM4_USB_OHCI0_BASE 0xE1900000
-#define SPEAR3XX_ICM4_USB_OHCI0_SIZE 0x00100000
-
-#define SPEAR3XX_ICM4_USB_OHCI1_BASE 0xE2100000
-#define SPEAR3XX_ICM4_USB_OHCI1_SIZE 0x00100000
-
-#define SPEAR3XX_ICM4_USB_ARB_BASE 0xE2800000
-#define SPEAR3XX_ICM4_USB_ARB_SIZE 0x00010000
+#define SPEAR3XX_ICM4_BASE UL(0xE0000000)
+#define SPEAR3XX_ICM4_MII_BASE UL(0xE0800000)
+#define SPEAR3XX_ICM4_USBD_FIFO_BASE UL(0xE1000000)
+#define SPEAR3XX_ICM4_USBD_CSR_BASE UL(0xE1100000)
+#define SPEAR3XX_ICM4_USBD_PLDT_BASE UL(0xE1200000)
+#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE UL(0xE1800000)
+#define SPEAR3XX_ICM4_USB_OHCI0_BASE UL(0xE1900000)
+#define SPEAR3XX_ICM4_USB_OHCI1_BASE UL(0xE2100000)
+#define SPEAR3XX_ICM4_USB_ARB_BASE UL(0xE2800000)
/* ML1 - Multi Layer CPU Subsystem */
-#define SPEAR3XX_ICM3_ML1_2_BASE 0xF0000000
-#define SPEAR3XX_ICM3_ML1_2_SIZE 0x0F000000
-
-#define SPEAR3XX_ML1_TMR_BASE 0xF0000000
-#define SPEAR3XX_ML1_TMR_SIZE 0x00100000
-
-#define SPEAR3XX_ML1_VIC_BASE 0xF1100000
+#define SPEAR3XX_ICM3_ML1_2_BASE UL(0xF0000000)
+#define SPEAR3XX_ML1_TMR_BASE UL(0xF0000000)
+#define SPEAR3XX_ML1_VIC_BASE UL(0xF1100000)
#define VA_SPEAR3XX_ML1_VIC_BASE IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE)
-#define SPEAR3XX_ML1_VIC_SIZE 0x00100000
/* ICM3 - Basic Subsystem */
-#define SPEAR3XX_ICM3_SMEM_BASE 0xF8000000
-#define SPEAR3XX_ICM3_SMEM_SIZE 0x04000000
-
-#define SPEAR3XX_ICM3_SMI_CTRL_BASE 0xFC000000
-#define SPEAR3XX_ICM3_SMI_CTRL_SIZE 0x00200000
-
-#define SPEAR3XX_ICM3_DMA_BASE 0xFC400000
-#define SPEAR3XX_ICM3_DMA_SIZE 0x00200000
-
-#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE 0xFC600000
-#define SPEAR3XX_ICM3_SDRAM_CTRL_SIZE 0x00200000
-
-#define SPEAR3XX_ICM3_TMR0_BASE 0xFC800000
-#define SPEAR3XX_ICM3_TMR0_SIZE 0x00080000
-
-#define SPEAR3XX_ICM3_WDT_BASE 0xFC880000
-#define SPEAR3XX_ICM3_WDT_SIZE 0x00080000
-
-#define SPEAR3XX_ICM3_RTC_BASE 0xFC900000
-#define SPEAR3XX_ICM3_RTC_SIZE 0x00080000
-
-#define SPEAR3XX_ICM3_GPIO_BASE 0xFC980000
-#define SPEAR3XX_ICM3_GPIO_SIZE 0x00080000
-
-#define SPEAR3XX_ICM3_SYS_CTRL_BASE 0xFCA00000
+#define SPEAR3XX_ICM3_SMEM_BASE UL(0xF8000000)
+#define SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
+#define SPEAR3XX_ICM3_DMA_BASE UL(0xFC400000)
+#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000)
+#define SPEAR3XX_ICM3_TMR0_BASE UL(0xFC800000)
+#define SPEAR3XX_ICM3_WDT_BASE UL(0xFC880000)
+#define SPEAR3XX_ICM3_RTC_BASE UL(0xFC900000)
+#define SPEAR3XX_ICM3_GPIO_BASE UL(0xFC980000)
+#define SPEAR3XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000)
#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE)
-#define SPEAR3XX_ICM3_SYS_CTRL_SIZE 0x00080000
-
-#define SPEAR3XX_ICM3_MISC_REG_BASE 0xFCA80000
+#define SPEAR3XX_ICM3_MISC_REG_BASE UL(0xFCA80000)
#define VA_SPEAR3XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE)
-#define SPEAR3XX_ICM3_MISC_REG_SIZE 0x00080000
-
-#define SPEAR3XX_ICM3_TMR1_BASE 0xFCB00000
-#define SPEAR3XX_ICM3_TMR1_SIZE 0x00080000
+#define SPEAR3XX_ICM3_TMR1_BASE UL(0xFCB00000)
/* Debug uart for linux, will be used for debug and uncompress messages */
#define SPEAR_DBG_UART_BASE SPEAR3XX_ICM1_UART_BASE
diff --git a/arch/arm/mach-spear3xx/include/mach/spear300.h b/arch/arm/mach-spear3xx/include/mach/spear300.h
index ccaa76522ee..c723515f885 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear300.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear300.h
@@ -17,11 +17,9 @@
#define __MACH_SPEAR300_H
/* Base address of various IPs */
-#define SPEAR300_TELECOM_BASE 0x50000000
-#define SPEAR300_TELECOM_SIZE 0x10000000
+#define SPEAR300_TELECOM_BASE UL(0x50000000)
/* Interrupt registers offsets and masks */
-#define SPEAR300_TELECOM_REG_SIZE 0x00010000
#define INT_ENB_MASK_REG 0x54
#define INT_STS_MASK_REG 0x58
#define IT_PERS_S_IRQ_MASK (1 << 0)
@@ -36,47 +34,20 @@
#define SHIRQ_RAS1_MASK 0x1FF
-#define SPEAR300_CLCD_BASE 0x60000000
-#define SPEAR300_CLCD_SIZE 0x10000000
-
-#define SPEAR300_SDIO_BASE 0x70000000
-#define SPEAR300_SDIO_SIZE 0x10000000
-
-#define SPEAR300_NAND_0_BASE 0x80000000
-#define SPEAR300_NAND_0_SIZE 0x04000000
-
-#define SPEAR300_NAND_1_BASE 0x84000000
-#define SPEAR300_NAND_1_SIZE 0x04000000
-
-#define SPEAR300_NAND_2_BASE 0x88000000
-#define SPEAR300_NAND_2_SIZE 0x04000000
-
-#define SPEAR300_NAND_3_BASE 0x8c000000
-#define SPEAR300_NAND_3_SIZE 0x04000000
-
-#define SPEAR300_NOR_0_BASE 0x90000000
-#define SPEAR300_NOR_0_SIZE 0x01000000
-
-#define SPEAR300_NOR_1_BASE 0x91000000
-#define SPEAR300_NOR_1_SIZE 0x01000000
-
-#define SPEAR300_NOR_2_BASE 0x92000000
-#define SPEAR300_NOR_2_SIZE 0x01000000
-
-#define SPEAR300_NOR_3_BASE 0x93000000
-#define SPEAR300_NOR_3_SIZE 0x01000000
-
-#define SPEAR300_FSMC_BASE 0x94000000
-#define SPEAR300_FSMC_SIZE 0x05000000
-
-#define SPEAR300_SOC_CONFIG_BASE 0x99000000
-#define SPEAR300_SOC_CONFIG_SIZE 0x00000008
-
-#define SPEAR300_KEYBOARD_BASE 0xA0000000
-#define SPEAR300_KEYBOARD_SIZE 0x09000000
-
-#define SPEAR300_GPIO_BASE 0xA9000000
-#define SPEAR300_GPIO_SIZE 0x07000000
+#define SPEAR300_CLCD_BASE UL(0x60000000)
+#define SPEAR300_SDHCI_BASE UL(0x70000000)
+#define SPEAR300_NAND_0_BASE UL(0x80000000)
+#define SPEAR300_NAND_1_BASE UL(0x84000000)
+#define SPEAR300_NAND_2_BASE UL(0x88000000)
+#define SPEAR300_NAND_3_BASE UL(0x8c000000)
+#define SPEAR300_NOR_0_BASE UL(0x90000000)
+#define SPEAR300_NOR_1_BASE UL(0x91000000)
+#define SPEAR300_NOR_2_BASE UL(0x92000000)
+#define SPEAR300_NOR_3_BASE UL(0x93000000)
+#define SPEAR300_FSMC_BASE UL(0x94000000)
+#define SPEAR300_SOC_CONFIG_BASE UL(0x99000000)
+#define SPEAR300_KEYBOARD_BASE UL(0xA0000000)
+#define SPEAR300_GPIO_BASE UL(0xA9000000)
#endif /* __MACH_SPEAR300_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear310.h b/arch/arm/mach-spear3xx/include/mach/spear310.h
index b27bb8af330..1e853479b8c 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear310.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear310.h
@@ -16,30 +16,18 @@
#ifndef __MACH_SPEAR310_H
#define __MACH_SPEAR310_H
-#define SPEAR310_NAND_BASE 0x40000000
-#define SPEAR310_NAND_SIZE 0x04000000
+#define SPEAR310_NAND_BASE UL(0x40000000)
+#define SPEAR310_FSMC_BASE UL(0x44000000)
+#define SPEAR310_UART1_BASE UL(0xB2000000)
+#define SPEAR310_UART2_BASE UL(0xB2080000)
+#define SPEAR310_UART3_BASE UL(0xB2100000)
+#define SPEAR310_UART4_BASE UL(0xB2180000)
+#define SPEAR310_UART5_BASE UL(0xB2200000)
+#define SPEAR310_HDLC_BASE UL(0xB2800000)
+#define SPEAR310_RS485_0_BASE UL(0xB3000000)
+#define SPEAR310_RS485_1_BASE UL(0xB3800000)
+#define SPEAR310_SOC_CONFIG_BASE UL(0xB4000000)
-#define SPEAR310_FSMC_BASE 0x44000000
-#define SPEAR310_FSMC_SIZE 0x01000000
-
-#define SPEAR310_UART1_BASE 0xB2000000
-#define SPEAR310_UART2_BASE 0xB2080000
-#define SPEAR310_UART3_BASE 0xB2100000
-#define SPEAR310_UART4_BASE 0xB2180000
-#define SPEAR310_UART5_BASE 0xB2200000
-#define SPEAR310_UART_SIZE 0x00080000
-
-#define SPEAR310_HDLC_BASE 0xB2800000
-#define SPEAR310_HDLC_SIZE 0x00800000
-
-#define SPEAR310_RS485_0_BASE 0xB3000000
-#define SPEAR310_RS485_0_SIZE 0x00800000
-
-#define SPEAR310_RS485_1_BASE 0xB3800000
-#define SPEAR310_RS485_1_SIZE 0x00800000
-
-#define SPEAR310_SOC_CONFIG_BASE 0xB4000000
-#define SPEAR310_SOC_CONFIG_SIZE 0x00000070
/* Interrupt registers offsets and masks */
#define INT_STS_MASK_REG 0x04
#define SMII0_IRQ_MASK (1 << 0)
diff --git a/arch/arm/mach-spear3xx/include/mach/spear320.h b/arch/arm/mach-spear3xx/include/mach/spear320.h
index cacf17a958c..940f0d85d95 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear320.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear320.h
@@ -16,54 +16,25 @@
#ifndef __MACH_SPEAR320_H
#define __MACH_SPEAR320_H
-#define SPEAR320_EMI_CTRL_BASE 0x40000000
-#define SPEAR320_EMI_CTRL_SIZE 0x08000000
+#define SPEAR320_EMI_CTRL_BASE UL(0x40000000)
+#define SPEAR320_FSMC_BASE UL(0x4C000000)
+#define SPEAR320_NAND_BASE UL(0x50000000)
+#define SPEAR320_I2S_BASE UL(0x60000000)
+#define SPEAR320_SDHCI_BASE UL(0x70000000)
+#define SPEAR320_CLCD_BASE UL(0x90000000)
+#define SPEAR320_PAR_PORT_BASE UL(0xA0000000)
+#define SPEAR320_CAN0_BASE UL(0xA1000000)
+#define SPEAR320_CAN1_BASE UL(0xA2000000)
+#define SPEAR320_UART1_BASE UL(0xA3000000)
+#define SPEAR320_UART2_BASE UL(0xA4000000)
+#define SPEAR320_SSP0_BASE UL(0xA5000000)
+#define SPEAR320_SSP1_BASE UL(0xA6000000)
+#define SPEAR320_I2C_BASE UL(0xA7000000)
+#define SPEAR320_PWM_BASE UL(0xA8000000)
+#define SPEAR320_SMII0_BASE UL(0xAA000000)
+#define SPEAR320_SMII1_BASE UL(0xAB000000)
+#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000)
-#define SPEAR320_FSMC_BASE 0x4C000000
-#define SPEAR320_FSMC_SIZE 0x01000000
-
-#define SPEAR320_I2S_BASE 0x60000000
-#define SPEAR320_I2S_SIZE 0x10000000
-
-#define SPEAR320_SDIO_BASE 0x70000000
-#define SPEAR320_SDIO_SIZE 0x10000000
-
-#define SPEAR320_CLCD_BASE 0x90000000
-#define SPEAR320_CLCD_SIZE 0x10000000
-
-#define SPEAR320_PAR_PORT_BASE 0xA0000000
-#define SPEAR320_PAR_PORT_SIZE 0x01000000
-
-#define SPEAR320_CAN0_BASE 0xA1000000
-#define SPEAR320_CAN0_SIZE 0x01000000
-
-#define SPEAR320_CAN1_BASE 0xA2000000
-#define SPEAR320_CAN1_SIZE 0x01000000
-
-#define SPEAR320_UART1_BASE 0xA3000000
-#define SPEAR320_UART2_BASE 0xA4000000
-#define SPEAR320_UART_SIZE 0x01000000
-
-#define SPEAR320_SSP0_BASE 0xA5000000
-#define SPEAR320_SSP0_SIZE 0x01000000
-
-#define SPEAR320_SSP1_BASE 0xA6000000
-#define SPEAR320_SSP1_SIZE 0x01000000
-
-#define SPEAR320_I2C_BASE 0xA7000000
-#define SPEAR320_I2C_SIZE 0x01000000
-
-#define SPEAR320_PWM_BASE 0xA8000000
-#define SPEAR320_PWM_SIZE 0x01000000
-
-#define SPEAR320_SMII0_BASE 0xAA000000
-#define SPEAR320_SMII0_SIZE 0x01000000
-
-#define SPEAR320_SMII1_BASE 0xAB000000
-#define SPEAR320_SMII1_SIZE 0x01000000
-
-#define SPEAR320_SOC_CONFIG_BASE 0xB4000000
-#define SPEAR320_SOC_CONFIG_SIZE 0x00000070
/* Interrupt registers offsets and masks */
#define INT_STS_MASK_REG 0x04
#define INT_CLR_MASK_REG 0x04
@@ -74,7 +45,7 @@
#define EMI_IRQ_MASK (1 << 7)
#define CLCD_IRQ_MASK (1 << 8)
#define SPP_IRQ_MASK (1 << 9)
-#define SDIO_IRQ_MASK (1 << 10)
+#define SDHCI_IRQ_MASK (1 << 10)
#define CAN_U_IRQ_MASK (1 << 11)
#define CAN_L_IRQ_MASK (1 << 12)
#define UART1_IRQ_MASK (1 << 13)
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index 5aa2d54ebfa..2697e65adf8 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -15,9 +15,9 @@
#include <linux/amba/pl061.h>
#include <linux/ptrace.h>
#include <asm/irq.h>
-#include <mach/generic.h>
-#include <mach/spear.h>
#include <plat/shirq.h>
+#include <mach/generic.h>
+#include <mach/hardware.h>
/* pad multiplexing support */
/* muxing registers */
@@ -310,7 +310,7 @@ struct pmx_dev pmx_telecom_boot_pins = {
.enb_on_reset = 1,
};
-struct pmx_dev_mode pmx_telecom_sdio_4bit_modes[] = {
+struct pmx_dev_mode pmx_telecom_sdhci_4bit_modes[] = {
{
.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
@@ -323,14 +323,14 @@ struct pmx_dev_mode pmx_telecom_sdio_4bit_modes[] = {
},
};
-struct pmx_dev pmx_telecom_sdio_4bit = {
- .name = "telecom_sdio_4bit",
- .modes = pmx_telecom_sdio_4bit_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_sdio_4bit_modes),
+struct pmx_dev pmx_telecom_sdhci_4bit = {
+ .name = "telecom_sdhci_4bit",
+ .modes = pmx_telecom_sdhci_4bit_modes,
+ .mode_count = ARRAY_SIZE(pmx_telecom_sdhci_4bit_modes),
.enb_on_reset = 1,
};
-struct pmx_dev_mode pmx_telecom_sdio_8bit_modes[] = {
+struct pmx_dev_mode pmx_telecom_sdhci_8bit_modes[] = {
{
.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
@@ -342,10 +342,10 @@ struct pmx_dev_mode pmx_telecom_sdio_8bit_modes[] = {
},
};
-struct pmx_dev pmx_telecom_sdio_8bit = {
- .name = "telecom_sdio_8bit",
- .modes = pmx_telecom_sdio_8bit_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_sdio_8bit_modes),
+struct pmx_dev pmx_telecom_sdhci_8bit = {
+ .name = "telecom_sdhci_8bit",
+ .modes = pmx_telecom_sdhci_8bit_modes,
+ .mode_count = ARRAY_SIZE(pmx_telecom_sdhci_8bit_modes),
.enb_on_reset = 1,
};
@@ -370,26 +370,6 @@ struct pmx_driver pmx_driver = {
.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
};
-/* Add spear300 specific devices here */
-/* arm gpio1 device registration */
-static struct pl061_platform_data gpio1_plat_data = {
- .gpio_base = 8,
- .irq_base = SPEAR_GPIO1_INT_BASE,
-};
-
-struct amba_device gpio1_device = {
- .dev = {
- .init_name = "gpio1",
- .platform_data = &gpio1_plat_data,
- },
- .res = {
- .start = SPEAR300_GPIO_BASE,
- .end = SPEAR300_GPIO_BASE + SPEAR300_GPIO_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {VIRQ_GPIO1, NO_IRQ},
-};
-
/* spear3xx shared irq */
struct shirq_dev_config shirq_ras1_config[] = {
{
@@ -443,6 +423,26 @@ struct spear_shirq shirq_ras1 = {
},
};
+/* Add spear300 specific devices here */
+/* arm gpio1 device registration */
+static struct pl061_platform_data gpio1_plat_data = {
+ .gpio_base = 8,
+ .irq_base = SPEAR_GPIO1_INT_BASE,
+};
+
+struct amba_device gpio1_device = {
+ .dev = {
+ .init_name = "gpio1",
+ .platform_data = &gpio1_plat_data,
+ },
+ .res = {
+ .start = SPEAR300_GPIO_BASE,
+ .end = SPEAR300_GPIO_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {VIRQ_GPIO1, NO_IRQ},
+};
+
/* spear300 routines */
void __init spear300_init(void)
{
@@ -452,17 +452,21 @@ void __init spear300_init(void)
spear3xx_init();
/* shared irq registration */
- shirq_ras1.regs.base =
- ioremap(SPEAR300_TELECOM_BASE, SPEAR300_TELECOM_REG_SIZE);
+ shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K);
if (shirq_ras1.regs.base) {
ret = spear_shirq_register(&shirq_ras1);
if (ret)
printk(KERN_ERR "Error registering Shared IRQ\n");
}
-}
-void spear300_pmx_init(void)
-{
- spear_pmx_init(&pmx_driver, SPEAR300_SOC_CONFIG_BASE,
- SPEAR300_SOC_CONFIG_SIZE);
+ /* pmx initialization */
+ pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
+ if (pmx_driver.base) {
+ ret = pmx_register(&pmx_driver);
+ if (ret)
+ printk(KERN_ERR "padmux: registeration failed. err no"
+ ": %d\n", ret);
+ /* Free Mapping, device selection already done */
+ iounmap(pmx_driver.base);
+ }
}
diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c
index bb21db152a2..42d2253ef54 100644
--- a/arch/arm/mach-spear3xx/spear300_evb.c
+++ b/arch/arm/mach-spear3xx/spear300_evb.c
@@ -14,7 +14,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* padmux devices to enable */
static struct pmx_dev *pmx_devs[] = {
@@ -28,7 +28,7 @@ static struct pmx_dev *pmx_devs[] = {
/* spear300 specific devices */
&pmx_fsmc_2_chips,
&pmx_clcd,
- &pmx_telecom_sdio_4bit,
+ &pmx_telecom_sdhci_4bit,
&pmx_gpio1,
};
@@ -51,14 +51,13 @@ static void __init spear300_evb_init(void)
{
unsigned int i;
- /* call spear300 machine init function */
- spear300_init();
-
- /* padmux initialization */
+ /* padmux initialization, must be done before spear300_init */
pmx_driver.mode = &photo_frame_mode;
pmx_driver.devs = pmx_devs;
pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
- spear300_pmx_init();
+
+ /* call spear300 machine init function */
+ spear300_init();
/* Add Platform Devices */
platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
@@ -72,6 +71,6 @@ MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
.boot_params = 0x00000100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
- .timer = &spear_sys_timer,
+ .timer = &spear3xx_timer,
.init_machine = spear300_evb_init,
MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index 53b41b52d7e..5c0a67b60c2 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -13,9 +13,9 @@
#include <linux/ptrace.h>
#include <asm/irq.h>
-#include <mach/generic.h>
-#include <mach/spear.h>
#include <plat/shirq.h>
+#include <mach/generic.h>
+#include <mach/hardware.h>
/* pad multiplexing support */
/* muxing registers */
@@ -139,8 +139,6 @@ struct pmx_driver pmx_driver = {
.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
};
-/* Add spear310 specific devices here */
-
/* spear3xx shared irq */
struct shirq_dev_config shirq_ras1_config[] = {
{
@@ -257,6 +255,8 @@ struct spear_shirq shirq_intrcomm_ras = {
},
};
+/* Add spear310 specific devices here */
+
/* spear310 routines */
void __init spear310_init(void)
{
@@ -267,7 +267,7 @@ void __init spear310_init(void)
spear3xx_init();
/* shared irq registration */
- base = ioremap(SPEAR310_SOC_CONFIG_BASE, SPEAR310_SOC_CONFIG_SIZE);
+ base = ioremap(SPEAR310_SOC_CONFIG_BASE, SZ_4K);
if (base) {
/* shirq 1 */
shirq_ras1.regs.base = base;
@@ -293,10 +293,11 @@ void __init spear310_init(void)
if (ret)
printk(KERN_ERR "Error registering Shared IRQ 4\n");
}
-}
-void spear310_pmx_init(void)
-{
- spear_pmx_init(&pmx_driver, SPEAR310_SOC_CONFIG_BASE,
- SPEAR310_SOC_CONFIG_SIZE);
+ /* pmx initialization */
+ pmx_driver.base = base;
+ ret = pmx_register(&pmx_driver);
+ if (ret)
+ printk(KERN_ERR "padmux: registeration failed. err no: %d\n",
+ ret);
}
diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c
index 7facf664319..2d7f333bd67 100644
--- a/arch/arm/mach-spear3xx/spear310_evb.c
+++ b/arch/arm/mach-spear3xx/spear310_evb.c
@@ -14,7 +14,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* padmux devices to enable */
static struct pmx_dev *pmx_devs[] = {
@@ -58,14 +58,13 @@ static void __init spear310_evb_init(void)
{
unsigned int i;
- /* call spear310 machine init function */
- spear310_init();
-
- /* padmux initialization */
+ /* padmux initialization, must be done before spear310_init */
pmx_driver.mode = NULL;
pmx_driver.devs = pmx_devs;
pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
- spear310_pmx_init();
+
+ /* call spear310 machine init function */
+ spear310_init();
/* Add Platform Devices */
platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
@@ -79,6 +78,6 @@ MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
.boot_params = 0x00000100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
- .timer = &spear_sys_timer,
+ .timer = &spear3xx_timer,
.init_machine = spear310_evb_init,
MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index 88b465284c3..741c1f414cb 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -13,9 +13,9 @@
#include <linux/ptrace.h>
#include <asm/irq.h>
-#include <mach/generic.h>
-#include <mach/spear.h>
#include <plat/shirq.h>
+#include <mach/generic.h>
+#include <mach/hardware.h>
/* pad multiplexing support */
/* muxing registers */
@@ -110,7 +110,7 @@ struct pmx_dev pmx_spp = {
.enb_on_reset = 1,
};
-struct pmx_dev_mode pmx_sdio_modes[] = {
+struct pmx_dev_mode pmx_sdhci_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE |
SMALL_PRINTERS_MODE,
@@ -118,10 +118,10 @@ struct pmx_dev_mode pmx_sdio_modes[] = {
},
};
-struct pmx_dev pmx_sdio = {
- .name = "sdio",
- .modes = pmx_sdio_modes,
- .mode_count = ARRAY_SIZE(pmx_sdio_modes),
+struct pmx_dev pmx_sdhci = {
+ .name = "sdhci",
+ .modes = pmx_sdhci_modes,
+ .mode_count = ARRAY_SIZE(pmx_sdhci_modes),
.enb_on_reset = 1,
};
@@ -215,17 +215,17 @@ struct pmx_dev pmx_can = {
.enb_on_reset = 1,
};
-struct pmx_dev_mode pmx_sdio_led_modes[] = {
+struct pmx_dev_mode pmx_sdhci_led_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
.mask = PMX_SSP_CS_MASK,
},
};
-struct pmx_dev pmx_sdio_led = {
- .name = "sdio_led",
- .modes = pmx_sdio_led_modes,
- .mode_count = ARRAY_SIZE(pmx_sdio_led_modes),
+struct pmx_dev pmx_sdhci_led = {
+ .name = "sdhci_led",
+ .modes = pmx_sdhci_led_modes,
+ .mode_count = ARRAY_SIZE(pmx_sdhci_led_modes),
.enb_on_reset = 1,
};
@@ -384,8 +384,6 @@ struct pmx_driver pmx_driver = {
.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
};
-/* Add spear320 specific devices here */
-
/* spear3xx shared irq */
struct shirq_dev_config shirq_ras1_config[] = {
{
@@ -510,6 +508,8 @@ struct spear_shirq shirq_intrcomm_ras = {
},
};
+/* Add spear320 specific devices here */
+
/* spear320 routines */
void __init spear320_init(void)
{
@@ -520,7 +520,7 @@ void __init spear320_init(void)
spear3xx_init();
/* shared irq registration */
- base = ioremap(SPEAR320_SOC_CONFIG_BASE, SPEAR320_SOC_CONFIG_SIZE);
+ base = ioremap(SPEAR320_SOC_CONFIG_BASE, SZ_4K);
if (base) {
/* shirq 1 */
shirq_ras1.regs.base = base;
@@ -540,10 +540,11 @@ void __init spear320_init(void)
if (ret)
printk(KERN_ERR "Error registering Shared IRQ 4\n");
}
-}
-void spear320_pmx_init(void)
-{
- spear_pmx_init(&pmx_driver, SPEAR320_SOC_CONFIG_BASE,
- SPEAR320_SOC_CONFIG_SIZE);
+ /* pmx initialization */
+ pmx_driver.base = base;
+ ret = pmx_register(&pmx_driver);
+ if (ret)
+ printk(KERN_ERR "padmux: registeration failed. err no: %d\n",
+ ret);
}
diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c
index 62ac685a413..8213e4b66c1 100644
--- a/arch/arm/mach-spear3xx/spear320_evb.c
+++ b/arch/arm/mach-spear3xx/spear320_evb.c
@@ -14,7 +14,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* padmux devices to enable */
static struct pmx_dev *pmx_devs[] = {
@@ -26,7 +26,7 @@ static struct pmx_dev *pmx_devs[] = {
/* spear320 specific devices */
&pmx_fsmc,
- &pmx_sdio,
+ &pmx_sdhci,
&pmx_i2s,
&pmx_uart1,
&pmx_uart2,
@@ -55,14 +55,13 @@ static void __init spear320_evb_init(void)
{
unsigned int i;
- /* call spear320 machine init function */
- spear320_init();
-
- /* padmux initialization */
+ /* padmux initialization, must be done before spear320_init */
pmx_driver.mode = &auto_net_mii_mode;
pmx_driver.devs = pmx_devs;
pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
- spear320_pmx_init();
+
+ /* call spear320 machine init function */
+ spear320_init();
/* Add Platform Devices */
platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
@@ -76,6 +75,6 @@ MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
.boot_params = 0x00000100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
- .timer = &spear_sys_timer,
+ .timer = &spear3xx_timer,
.init_machine = spear320_evb_init,
MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index 52f553c8c46..d3ba8ca1bc5 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -19,7 +19,7 @@
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* Add spear3xx machines common devices here */
/* gpio device registration */
@@ -35,7 +35,7 @@ struct amba_device gpio_device = {
},
.res = {
.start = SPEAR3XX_ICM3_GPIO_BASE,
- .end = SPEAR3XX_ICM3_GPIO_BASE + SPEAR3XX_ICM3_GPIO_SIZE - 1,
+ .end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_BASIC_GPIO, NO_IRQ},
@@ -48,7 +48,7 @@ struct amba_device uart_device = {
},
.res = {
.start = SPEAR3XX_ICM1_UART_BASE,
- .end = SPEAR3XX_ICM1_UART_BASE + SPEAR3XX_ICM1_UART_SIZE - 1,
+ .end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_UART, NO_IRQ},
@@ -71,22 +71,22 @@ struct map_desc spear3xx_io_desc[] __initdata = {
{
.virtual = VA_SPEAR3XX_ICM1_UART_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE),
- .length = SPEAR3XX_ICM1_UART_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR3XX_ML1_VIC_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE),
- .length = SPEAR3XX_ML1_VIC_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR3XX_ICM3_SYS_CTRL_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE),
- .length = SPEAR3XX_ICM3_SYS_CTRL_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR3XX_ICM3_MISC_REG_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE),
- .length = SPEAR3XX_ICM3_MISC_REG_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
},
};
@@ -523,26 +523,35 @@ struct pmx_dev pmx_plgpio_45_46_49_50 = {
.mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes),
.enb_on_reset = 1,
};
+#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
-#endif
-
-/* spear padmux initialization function */
-void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size)
+static void __init spear3xx_timer_init(void)
{
- int ret = 0;
+ char pclk_name[] = "pll3_48m_clk";
+ struct clk *gpt_clk, *pclk;
+
+ /* get the system timer clock */
+ gpt_clk = clk_get_sys("gpt0", NULL);
+ if (IS_ERR(gpt_clk)) {
+ pr_err("%s:couldn't get clk for gpt\n", __func__);
+ BUG();
+ }
- /* pad mux initialization */
- pmx_driver->base = ioremap(base, size);
- if (!pmx_driver->base) {
- ret = -ENOMEM;
- goto pmx_fail;
+ /* get the suitable parent clock for timer*/
+ pclk = clk_get(NULL, pclk_name);
+ if (IS_ERR(pclk)) {
+ pr_err("%s:couldn't get %s as parent for gpt\n",
+ __func__, pclk_name);
+ BUG();
}
- ret = pmx_register(pmx_driver);
- iounmap(pmx_driver->base);
+ clk_set_parent(gpt_clk, pclk);
+ clk_put(gpt_clk);
+ clk_put(pclk);
-pmx_fail:
- if (ret)
- printk(KERN_ERR "padmux: registration failed. err no: %d\n",
- ret);
+ spear_setup_timer();
}
+
+struct sys_timer spear3xx_timer = {
+ .init = spear3xx_timer_init,
+};
diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c
index 36ff056b732..88b748b5be8 100644
--- a/arch/arm/mach-spear6xx/clock.c
+++ b/arch/arm/mach-spear6xx/clock.c
@@ -13,8 +13,8 @@
#include <linux/init.h>
#include <linux/kernel.h>
-#include <mach/misc_regs.h>
#include <plat/clock.h>
+#include <mach/misc_regs.h>
/* root clks */
/* 32 KHz oscillator clock */
@@ -39,18 +39,43 @@ static struct clk rtc_clk = {
};
/* clock derived from 30 MHz osc clk */
+/* pll masks structure */
+static struct pll_clk_masks pll1_masks = {
+ .mode_mask = PLL_MODE_MASK,
+ .mode_shift = PLL_MODE_SHIFT,
+ .norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
+ .norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
+ .dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
+ .dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
+ .div_p_mask = PLL_DIV_P_MASK,
+ .div_p_shift = PLL_DIV_P_SHIFT,
+ .div_n_mask = PLL_DIV_N_MASK,
+ .div_n_shift = PLL_DIV_N_SHIFT,
+};
+
/* pll1 configuration structure */
static struct pll_clk_config pll1_config = {
.mode_reg = PLL1_CTR,
.cfg_reg = PLL1_FRQ,
+ .masks = &pll1_masks,
+};
+
+/* pll rate configuration table, in ascending order of rates */
+struct pll_rate_tbl pll_rtbl[] = {
+ {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
+ {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
};
/* PLL1 clock */
static struct clk pll1_clk = {
+ .flags = ENABLED_ON_INIT,
.pclk = &osc_30m_clk,
.en_reg = PLL1_CTR,
.en_reg_bit = PLL_ENABLE,
- .recalc = &pll1_clk_recalc,
+ .calc_rate = &pll_calc_rate,
+ .recalc = &pll_clk_recalc,
+ .set_rate = &pll_clk_set_rate,
+ .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
.private_data = &pll1_config,
};
@@ -76,31 +101,83 @@ static struct clk cpu_clk = {
.recalc = &follow_parent,
};
+/* ahb masks structure */
+static struct bus_clk_masks ahb_masks = {
+ .mask = PLL_HCLK_RATIO_MASK,
+ .shift = PLL_HCLK_RATIO_SHIFT,
+};
+
/* ahb configuration structure */
static struct bus_clk_config ahb_config = {
.reg = CORE_CLK_CFG,
- .mask = PLL_HCLK_RATIO_MASK,
- .shift = PLL_HCLK_RATIO_SHIFT,
+ .masks = &ahb_masks,
+};
+
+/* ahb rate configuration table, in ascending order of rates */
+struct bus_rate_tbl bus_rtbl[] = {
+ {.div = 3}, /* == parent divided by 4 */
+ {.div = 2}, /* == parent divided by 3 */
+ {.div = 1}, /* == parent divided by 2 */
+ {.div = 0}, /* == parent divided by 1 */
};
/* ahb clock */
static struct clk ahb_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll1_clk,
+ .calc_rate = &bus_calc_rate,
.recalc = &bus_clk_recalc,
+ .set_rate = &bus_clk_set_rate,
+ .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
.private_data = &ahb_config,
};
+/* auxiliary synthesizers masks */
+static struct aux_clk_masks aux_masks = {
+ .eq_sel_mask = AUX_EQ_SEL_MASK,
+ .eq_sel_shift = AUX_EQ_SEL_SHIFT,
+ .eq1_mask = AUX_EQ1_SEL,
+ .eq2_mask = AUX_EQ2_SEL,
+ .xscale_sel_mask = AUX_XSCALE_MASK,
+ .xscale_sel_shift = AUX_XSCALE_SHIFT,
+ .yscale_sel_mask = AUX_YSCALE_MASK,
+ .yscale_sel_shift = AUX_YSCALE_SHIFT,
+};
+
+/* uart configurations */
+static struct aux_clk_config uart_synth_config = {
+ .synth_reg = UART_CLK_SYNT,
+ .masks = &aux_masks,
+};
+
+/* aux rate configuration table, in ascending order of rates */
+struct aux_rate_tbl aux_rtbl[] = {
+ /* For PLL1 = 332 MHz */
+ {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
+ {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
+ {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
+};
+
+/* uart synth clock */
+static struct clk uart_synth_clk = {
+ .en_reg = UART_CLK_SYNT,
+ .en_reg_bit = AUX_SYNT_ENB,
+ .pclk = &pll1_clk,
+ .calc_rate = &aux_calc_rate,
+ .recalc = &aux_clk_recalc,
+ .set_rate = &aux_clk_set_rate,
+ .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
+ .private_data = &uart_synth_config,
+};
+
/* uart parents */
static struct pclk_info uart_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &uart_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
@@ -112,19 +189,13 @@ static struct pclk_sel uart_pclk_sel = {
.pclk_sel_mask = UART_CLK_MASK,
};
-/* uart configurations */
-static struct aux_clk_config uart_config = {
- .synth_reg = UART_CLK_SYNT,
-};
-
/* uart0 clock */
static struct clk uart0_clk = {
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = UART0_CLK_ENB,
.pclk_sel = &uart_pclk_sel,
.pclk_sel_shift = UART_CLK_SHIFT,
- .recalc = &aux_clk_recalc,
- .private_data = &uart_config,
+ .recalc = &follow_parent,
};
/* uart1 clock */
@@ -133,25 +204,35 @@ static struct clk uart1_clk = {
.en_reg_bit = UART1_CLK_ENB,
.pclk_sel = &uart_pclk_sel,
.pclk_sel_shift = UART_CLK_SHIFT,
- .recalc = &aux_clk_recalc,
- .private_data = &uart_config,
+ .recalc = &follow_parent,
};
/* firda configurations */
-static struct aux_clk_config firda_config = {
+static struct aux_clk_config firda_synth_config = {
.synth_reg = FIRDA_CLK_SYNT,
+ .masks = &aux_masks,
+};
+
+/* firda synth clock */
+static struct clk firda_synth_clk = {
+ .en_reg = FIRDA_CLK_SYNT,
+ .en_reg_bit = AUX_SYNT_ENB,
+ .pclk = &pll1_clk,
+ .calc_rate = &aux_calc_rate,
+ .recalc = &aux_clk_recalc,
+ .set_rate = &aux_clk_set_rate,
+ .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
+ .private_data = &firda_synth_config,
};
/* firda parents */
static struct pclk_info firda_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &firda_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
@@ -169,25 +250,35 @@ static struct clk firda_clk = {
.en_reg_bit = FIRDA_CLK_ENB,
.pclk_sel = &firda_pclk_sel,
.pclk_sel_shift = FIRDA_CLK_SHIFT,
- .recalc = &aux_clk_recalc,
- .private_data = &firda_config,
+ .recalc = &follow_parent,
};
/* clcd configurations */
-static struct aux_clk_config clcd_config = {
+static struct aux_clk_config clcd_synth_config = {
.synth_reg = CLCD_CLK_SYNT,
+ .masks = &aux_masks,
+};
+
+/* firda synth clock */
+static struct clk clcd_synth_clk = {
+ .en_reg = CLCD_CLK_SYNT,
+ .en_reg_bit = AUX_SYNT_ENB,
+ .pclk = &pll1_clk,
+ .calc_rate = &aux_calc_rate,
+ .recalc = &aux_clk_recalc,
+ .set_rate = &aux_clk_set_rate,
+ .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
+ .private_data = &clcd_synth_config,
};
/* clcd parents */
static struct pclk_info clcd_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &clcd_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
@@ -205,82 +296,173 @@ static struct clk clcd_clk = {
.en_reg_bit = CLCD_CLK_ENB,
.pclk_sel = &clcd_pclk_sel,
.pclk_sel_shift = CLCD_CLK_SHIFT,
- .recalc = &aux_clk_recalc,
- .private_data = &clcd_config,
+ .recalc = &follow_parent,
+};
+
+/* gpt synthesizer masks */
+static struct gpt_clk_masks gpt_masks = {
+ .mscale_sel_mask = GPT_MSCALE_MASK,
+ .mscale_sel_shift = GPT_MSCALE_SHIFT,
+ .nscale_sel_mask = GPT_NSCALE_MASK,
+ .nscale_sel_shift = GPT_NSCALE_SHIFT,
+};
+
+/* gpt rate configuration table, in ascending order of rates */
+struct gpt_rate_tbl gpt_rtbl[] = {
+ /* For pll1 = 332 MHz */
+ {.mscale = 4, .nscale = 0}, /* 41.5 MHz */
+ {.mscale = 2, .nscale = 0}, /* 55.3 MHz */
+ {.mscale = 1, .nscale = 0}, /* 83 MHz */
+};
+
+/* gpt0 synth clk config*/
+static struct gpt_clk_config gpt0_synth_config = {
+ .synth_reg = PRSC1_CLK_CFG,
+ .masks = &gpt_masks,
+};
+
+/* gpt synth clock */
+static struct clk gpt0_synth_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .calc_rate = &gpt_calc_rate,
+ .recalc = &gpt_clk_recalc,
+ .set_rate = &gpt_clk_set_rate,
+ .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+ .private_data = &gpt0_synth_config,
};
/* gpt parents */
-static struct pclk_info gpt_pclk_info[] = {
+static struct pclk_info gpt0_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &gpt0_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
/* gpt parent select structure */
-static struct pclk_sel gpt_pclk_sel = {
- .pclk_info = gpt_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt_pclk_info),
+static struct pclk_sel gpt0_pclk_sel = {
+ .pclk_info = gpt0_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = GPT_CLK_MASK,
};
-/* gpt0_1 configurations */
-static struct aux_clk_config gpt0_1_config = {
- .synth_reg = PRSC1_CLK_CFG,
-};
-
/* gpt0 ARM1 subsystem timer clock */
static struct clk gpt0_clk = {
.flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel = &gpt0_pclk_sel,
.pclk_sel_shift = GPT0_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt0_1_config,
+ .recalc = &follow_parent,
+};
+
+
+/* Note: gpt0 and gpt1 share same parent clocks */
+/* gpt parent select structure */
+static struct pclk_sel gpt1_pclk_sel = {
+ .pclk_info = gpt0_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt1 timer clock */
static struct clk gpt1_clk = {
.flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel = &gpt1_pclk_sel,
.pclk_sel_shift = GPT1_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt0_1_config,
+ .recalc = &follow_parent,
};
-/* gpt2 configurations */
-static struct aux_clk_config gpt2_config = {
+/* gpt2 synth clk config*/
+static struct gpt_clk_config gpt2_synth_config = {
.synth_reg = PRSC2_CLK_CFG,
+ .masks = &gpt_masks,
+};
+
+/* gpt synth clock */
+static struct clk gpt2_synth_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .calc_rate = &gpt_calc_rate,
+ .recalc = &gpt_clk_recalc,
+ .set_rate = &gpt_clk_set_rate,
+ .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+ .private_data = &gpt2_synth_config,
+};
+
+/* gpt parents */
+static struct pclk_info gpt2_pclk_info[] = {
+ {
+ .pclk = &gpt2_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
+ }, {
+ .pclk = &pll3_48m_clk,
+ .pclk_val = AUX_CLK_PLL3_VAL,
+ },
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt2_pclk_sel = {
+ .pclk_info = gpt2_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt2_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt2 timer clock */
static struct clk gpt2_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPT2_CLK_ENB,
- .pclk_sel = &gpt_pclk_sel,
+ .flags = ALWAYS_ENABLED,
+ .pclk_sel = &gpt2_pclk_sel,
.pclk_sel_shift = GPT2_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt2_config,
+ .recalc = &follow_parent,
};
-/* gpt3 configurations */
-static struct aux_clk_config gpt3_config = {
+/* gpt3 synth clk config*/
+static struct gpt_clk_config gpt3_synth_config = {
.synth_reg = PRSC3_CLK_CFG,
+ .masks = &gpt_masks,
+};
+
+/* gpt synth clock */
+static struct clk gpt3_synth_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .calc_rate = &gpt_calc_rate,
+ .recalc = &gpt_clk_recalc,
+ .set_rate = &gpt_clk_set_rate,
+ .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+ .private_data = &gpt3_synth_config,
+};
+
+/* gpt parents */
+static struct pclk_info gpt3_pclk_info[] = {
+ {
+ .pclk = &gpt3_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
+ }, {
+ .pclk = &pll3_48m_clk,
+ .pclk_val = AUX_CLK_PLL3_VAL,
+ },
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt3_pclk_sel = {
+ .pclk_info = gpt3_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt3_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt3 timer clock */
static struct clk gpt3_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPT3_CLK_ENB,
- .pclk_sel = &gpt_pclk_sel,
+ .flags = ALWAYS_ENABLED,
+ .pclk_sel = &gpt3_pclk_sel,
.pclk_sel_shift = GPT3_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt3_config,
+ .recalc = &follow_parent,
};
/* clock derived from pll3 clk */
@@ -309,18 +491,26 @@ static struct clk usbd_clk = {
};
/* clock derived from ahb clk */
+/* apb masks structure */
+static struct bus_clk_masks apb_masks = {
+ .mask = HCLK_PCLK_RATIO_MASK,
+ .shift = HCLK_PCLK_RATIO_SHIFT,
+};
+
/* apb configuration structure */
static struct bus_clk_config apb_config = {
.reg = CORE_CLK_CFG,
- .mask = HCLK_PCLK_RATIO_MASK,
- .shift = HCLK_PCLK_RATIO_SHIFT,
+ .masks = &apb_masks,
};
/* apb clock */
static struct clk apb_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &ahb_clk,
+ .calc_rate = &bus_calc_rate,
.recalc = &bus_clk_recalc,
+ .set_rate = &bus_clk_set_rate,
+ .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
.private_data = &apb_config,
};
@@ -432,12 +622,12 @@ static struct clk dummy_apb_pclk;
/* array of all spear 6xx clock lookups */
static struct clk_lookup spear_clk_lookups[] = {
- { .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
+ { .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
/* root clks */
{ .con_id = "osc_32k_clk", .clk = &osc_32k_clk},
{ .con_id = "osc_30m_clk", .clk = &osc_30m_clk},
/* clock derived from 32 KHz os clk */
- { .dev_id = "rtc", .clk = &rtc_clk},
+ { .dev_id = "rtc-spear", .clk = &rtc_clk},
/* clock derived from 30 MHz os clk */
{ .con_id = "pll1_clk", .clk = &pll1_clk},
{ .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk},
@@ -445,6 +635,12 @@ static struct clk_lookup spear_clk_lookups[] = {
/* clock derived from pll1 clk */
{ .con_id = "cpu_clk", .clk = &cpu_clk},
{ .con_id = "ahb_clk", .clk = &ahb_clk},
+ { .con_id = "uart_synth_clk", .clk = &uart_synth_clk},
+ { .con_id = "firda_synth_clk", .clk = &firda_synth_clk},
+ { .con_id = "clcd_synth_clk", .clk = &clcd_synth_clk},
+ { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk},
+ { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk},
+ { .con_id = "gpt3_synth_clk", .clk = &gpt3_synth_clk},
{ .dev_id = "uart0", .clk = &uart0_clk},
{ .dev_id = "uart1", .clk = &uart1_clk},
{ .dev_id = "firda", .clk = &firda_clk},
@@ -454,22 +650,22 @@ static struct clk_lookup spear_clk_lookups[] = {
{ .dev_id = "gpt2", .clk = &gpt2_clk},
{ .dev_id = "gpt3", .clk = &gpt3_clk},
/* clock derived from pll3 clk */
- { .dev_id = "usbh0", .clk = &usbh0_clk},
- { .dev_id = "usbh1", .clk = &usbh1_clk},
- { .dev_id = "usbd", .clk = &usbd_clk},
+ { .dev_id = "designware_udc", .clk = &usbd_clk},
+ { .con_id = "usbh.0_clk", .clk = &usbh0_clk},
+ { .con_id = "usbh.1_clk", .clk = &usbh1_clk},
/* clock derived from ahb clk */
{ .con_id = "apb_clk", .clk = &apb_clk},
- { .dev_id = "i2c", .clk = &i2c_clk},
+ { .dev_id = "i2c_designware.0", .clk = &i2c_clk},
{ .dev_id = "dma", .clk = &dma_clk},
{ .dev_id = "jpeg", .clk = &jpeg_clk},
{ .dev_id = "gmac", .clk = &gmac_clk},
{ .dev_id = "smi", .clk = &smi_clk},
- { .dev_id = "fsmc", .clk = &fsmc_clk},
+ { .con_id = "fsmc", .clk = &fsmc_clk},
/* clock derived from apb clk */
{ .dev_id = "adc", .clk = &adc_clk},
- { .dev_id = "ssp0", .clk = &ssp0_clk},
- { .dev_id = "ssp1", .clk = &ssp1_clk},
- { .dev_id = "ssp2", .clk = &ssp2_clk},
+ { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk},
+ { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk},
+ { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk},
{ .dev_id = "gpio0", .clk = &gpio0_clk},
{ .dev_id = "gpio1", .clk = &gpio1_clk},
{ .dev_id = "gpio2", .clk = &gpio2_clk},
diff --git a/arch/arm/mach-spear6xx/include/mach/entry-macro.S b/arch/arm/mach-spear6xx/include/mach/entry-macro.S
index 9eaecaeafcf..8a0b0ed7b20 100644
--- a/arch/arm/mach-spear6xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-spear6xx/include/mach/entry-macro.S
@@ -11,9 +11,8 @@
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <mach/spear.h>
#include <asm/hardware/vic.h>
+#include <mach/hardware.h>
.macro disable_fiq
.endm
diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h
index 16205a53875..94cf4a648b5 100644
--- a/arch/arm/mach-spear6xx/include/mach/generic.h
+++ b/arch/arm/mach-spear6xx/include/mach/generic.h
@@ -14,11 +14,11 @@
#ifndef __MACH_GENERIC_H
#define __MACH_GENERIC_H
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
/*
* Each GPT has 2 timer channels
@@ -31,9 +31,10 @@
/* Add spear6xx family device structure declarations here */
extern struct amba_device gpio_device[];
extern struct amba_device uart_device[];
-extern struct sys_timer spear_sys_timer;
+extern struct sys_timer spear6xx_timer;
/* Add spear6xx family function declarations here */
+void __init spear_setup_timer(void);
void __init spear6xx_map_io(void);
void __init spear6xx_init_irq(void);
void __init spear6xx_init(void);
diff --git a/arch/arm/mach-spear6xx/include/mach/hardware.h b/arch/arm/mach-spear6xx/include/mach/hardware.h
index 7545116deca..0b3f96ae284 100644
--- a/arch/arm/mach-spear6xx/include/mach/hardware.h
+++ b/arch/arm/mach-spear6xx/include/mach/hardware.h
@@ -14,8 +14,10 @@
#ifndef __MACH_HARDWARE_H
#define __MACH_HARDWARE_H
+#include <plat/hardware.h>
+#include <mach/spear.h>
+
/* Vitual to physical translation of statically mapped space */
#define IO_ADDRESS(x) (x | 0xF0000000)
#endif /* __MACH_HARDWARE_H */
-
diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
index 03908036b0d..68c20a007b0 100644
--- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
@@ -14,16 +14,16 @@
#ifndef __MACH_MISC_REGS_H
#define __MACH_MISC_REGS_H
-#include <mach/spear.h>
+#include <mach/hardware.h>
-#define MISC_BASE VA_SPEAR6XX_ICM3_MISC_REG_BASE
+#define MISC_BASE IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE)
-#define SOC_CFG_CTR ((unsigned int *)(MISC_BASE + 0x000))
-#define DIAG_CFG_CTR ((unsigned int *)(MISC_BASE + 0x004))
-#define PLL1_CTR ((unsigned int *)(MISC_BASE + 0x008))
-#define PLL1_FRQ ((unsigned int *)(MISC_BASE + 0x00C))
-#define PLL1_MOD ((unsigned int *)(MISC_BASE + 0x010))
-#define PLL2_CTR ((unsigned int *)(MISC_BASE + 0x014))
+#define SOC_CFG_CTR (MISC_BASE + 0x000)
+#define DIAG_CFG_CTR (MISC_BASE + 0x004)
+#define PLL1_CTR (MISC_BASE + 0x008)
+#define PLL1_FRQ (MISC_BASE + 0x00C)
+#define PLL1_MOD (MISC_BASE + 0x010)
+#define PLL2_CTR (MISC_BASE + 0x014)
/* PLL_CTR register masks */
#define PLL_ENABLE 2
#define PLL_MODE_SHIFT 4
@@ -33,7 +33,7 @@
#define PLL_MODE_DITH_DSB 2
#define PLL_MODE_DITH_SSB 3
-#define PLL2_FRQ ((unsigned int *)(MISC_BASE + 0x018))
+#define PLL2_FRQ (MISC_BASE + 0x018)
/* PLL FRQ register masks */
#define PLL_DIV_N_SHIFT 0
#define PLL_DIV_N_MASK 0xFF
@@ -44,16 +44,16 @@
#define PLL_DITH_FDBK_M_SHIFT 16
#define PLL_DITH_FDBK_M_MASK 0xFFFF
-#define PLL2_MOD ((unsigned int *)(MISC_BASE + 0x01C))
-#define PLL_CLK_CFG ((unsigned int *)(MISC_BASE + 0x020))
-#define CORE_CLK_CFG ((unsigned int *)(MISC_BASE + 0x024))
+#define PLL2_MOD (MISC_BASE + 0x01C)
+#define PLL_CLK_CFG (MISC_BASE + 0x020)
+#define CORE_CLK_CFG (MISC_BASE + 0x024)
/* CORE CLK CFG register masks */
#define PLL_HCLK_RATIO_SHIFT 10
#define PLL_HCLK_RATIO_MASK 0x3
#define HCLK_PCLK_RATIO_SHIFT 8
#define HCLK_PCLK_RATIO_MASK 0x3
-#define PERIP_CLK_CFG ((unsigned int *)(MISC_BASE + 0x028))
+#define PERIP_CLK_CFG (MISC_BASE + 0x028)
/* PERIP_CLK_CFG register masks */
#define CLCD_CLK_SHIFT 2
#define CLCD_CLK_MASK 0x3
@@ -66,10 +66,10 @@
#define GPT2_CLK_SHIFT 11
#define GPT3_CLK_SHIFT 12
#define GPT_CLK_MASK 0x1
-#define AUX_CLK_PLL3_MASK 0
-#define AUX_CLK_PLL1_MASK 1
+#define AUX_CLK_PLL3_VAL 0
+#define AUX_CLK_PLL1_VAL 1
-#define PERIP1_CLK_ENB ((unsigned int *)(MISC_BASE + 0x02C))
+#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
/* PERIP1_CLK_ENB register masks */
#define UART0_CLK_ENB 3
#define UART1_CLK_ENB 4
@@ -95,34 +95,35 @@
#define USBH0_CLK_ENB 25
#define USBH1_CLK_ENB 26
-#define SOC_CORE_ID ((unsigned int *)(MISC_BASE + 0x030))
-#define RAS_CLK_ENB ((unsigned int *)(MISC_BASE + 0x034))
-#define PERIP1_SOF_RST ((unsigned int *)(MISC_BASE + 0x038))
+#define SOC_CORE_ID (MISC_BASE + 0x030)
+#define RAS_CLK_ENB (MISC_BASE + 0x034)
+#define PERIP1_SOF_RST (MISC_BASE + 0x038)
/* PERIP1_SOF_RST register masks */
#define JPEG_SOF_RST 8
-#define SOC_USER_ID ((unsigned int *)(MISC_BASE + 0x03C))
-#define RAS_SOF_RST ((unsigned int *)(MISC_BASE + 0x040))
-#define PRSC1_CLK_CFG ((unsigned int *)(MISC_BASE + 0x044))
-#define PRSC2_CLK_CFG ((unsigned int *)(MISC_BASE + 0x048))
-#define PRSC3_CLK_CFG ((unsigned int *)(MISC_BASE + 0x04C))
+#define SOC_USER_ID (MISC_BASE + 0x03C)
+#define RAS_SOF_RST (MISC_BASE + 0x040)
+#define PRSC1_CLK_CFG (MISC_BASE + 0x044)
+#define PRSC2_CLK_CFG (MISC_BASE + 0x048)
+#define PRSC3_CLK_CFG (MISC_BASE + 0x04C)
/* gpt synthesizer register masks */
#define GPT_MSCALE_SHIFT 0
#define GPT_MSCALE_MASK 0xFFF
#define GPT_NSCALE_SHIFT 12
#define GPT_NSCALE_MASK 0xF
-#define AMEM_CLK_CFG ((unsigned int *)(MISC_BASE + 0x050))
-#define EXPI_CLK_CFG ((unsigned int *)(MISC_BASE + 0x054))
-#define CLCD_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x05C))
-#define FIRDA_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x060))
-#define UART_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x064))
-#define GMAC_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x068))
-#define RAS1_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x06C))
-#define RAS2_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x070))
-#define RAS3_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x074))
-#define RAS4_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x078))
+#define AMEM_CLK_CFG (MISC_BASE + 0x050)
+#define EXPI_CLK_CFG (MISC_BASE + 0x054)
+#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
+#define UART_CLK_SYNT (MISC_BASE + 0x064)
+#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
+#define RAS1_CLK_SYNT (MISC_BASE + 0x06C)
+#define RAS2_CLK_SYNT (MISC_BASE + 0x070)
+#define RAS3_CLK_SYNT (MISC_BASE + 0x074)
+#define RAS4_CLK_SYNT (MISC_BASE + 0x078)
/* aux clk synthesiser register masks for irda to ras4 */
+#define AUX_SYNT_ENB 31
#define AUX_EQ_SEL_SHIFT 30
#define AUX_EQ_SEL_MASK 1
#define AUX_EQ1_SEL 0
@@ -132,42 +133,42 @@
#define AUX_YSCALE_SHIFT 0
#define AUX_YSCALE_MASK 0xFFF
-#define ICM1_ARB_CFG ((unsigned int *)(MISC_BASE + 0x07C))
-#define ICM2_ARB_CFG ((unsigned int *)(MISC_BASE + 0x080))
-#define ICM3_ARB_CFG ((unsigned int *)(MISC_BASE + 0x084))
-#define ICM4_ARB_CFG ((unsigned int *)(MISC_BASE + 0x088))
-#define ICM5_ARB_CFG ((unsigned int *)(MISC_BASE + 0x08C))
-#define ICM6_ARB_CFG ((unsigned int *)(MISC_BASE + 0x090))
-#define ICM7_ARB_CFG ((unsigned int *)(MISC_BASE + 0x094))
-#define ICM8_ARB_CFG ((unsigned int *)(MISC_BASE + 0x098))
-#define ICM9_ARB_CFG ((unsigned int *)(MISC_BASE + 0x09C))
-#define DMA_CHN_CFG ((unsigned int *)(MISC_BASE + 0x0A0))
-#define USB2_PHY_CFG ((unsigned int *)(MISC_BASE + 0x0A4))
-#define GMAC_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0A8))
-#define EXPI_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0AC))
-#define PRC1_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C0))
-#define PRC2_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C4))
-#define PRC3_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C8))
-#define PRC4_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0CC))
-#define PRC1_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D0))
-#define PRC2_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D4))
-#define PRC3_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D8))
-#define PRC4_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0DC))
-#define PWRDOWN_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0E0))
-#define COMPSSTL_1V8_CFG ((unsigned int *)(MISC_BASE + 0x0E4))
-#define COMPSSTL_2V5_CFG ((unsigned int *)(MISC_BASE + 0x0E8))
-#define COMPCOR_3V3_CFG ((unsigned int *)(MISC_BASE + 0x0EC))
-#define SSTLPAD_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F0))
-#define BIST1_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F4))
-#define BIST2_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F8))
-#define BIST3_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0FC))
-#define BIST4_CFG_CTR ((unsigned int *)(MISC_BASE + 0x100))
-#define BIST5_CFG_CTR ((unsigned int *)(MISC_BASE + 0x104))
-#define BIST1_STS_RES ((unsigned int *)(MISC_BASE + 0x108))
-#define BIST2_STS_RES ((unsigned int *)(MISC_BASE + 0x10C))
-#define BIST3_STS_RES ((unsigned int *)(MISC_BASE + 0x110))
-#define BIST4_STS_RES ((unsigned int *)(MISC_BASE + 0x114))
-#define BIST5_STS_RES ((unsigned int *)(MISC_BASE + 0x118))
-#define SYSERR_CFG_CTR ((unsigned int *)(MISC_BASE + 0x11C))
+#define ICM1_ARB_CFG (MISC_BASE + 0x07C)
+#define ICM2_ARB_CFG (MISC_BASE + 0x080)
+#define ICM3_ARB_CFG (MISC_BASE + 0x084)
+#define ICM4_ARB_CFG (MISC_BASE + 0x088)
+#define ICM5_ARB_CFG (MISC_BASE + 0x08C)
+#define ICM6_ARB_CFG (MISC_BASE + 0x090)
+#define ICM7_ARB_CFG (MISC_BASE + 0x094)
+#define ICM8_ARB_CFG (MISC_BASE + 0x098)
+#define ICM9_ARB_CFG (MISC_BASE + 0x09C)
+#define DMA_CHN_CFG (MISC_BASE + 0x0A0)
+#define USB2_PHY_CFG (MISC_BASE + 0x0A4)
+#define GMAC_CFG_CTR (MISC_BASE + 0x0A8)
+#define EXPI_CFG_CTR (MISC_BASE + 0x0AC)
+#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0)
+#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4)
+#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8)
+#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC)
+#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0)
+#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4)
+#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8)
+#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC)
+#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0)
+#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4)
+#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8)
+#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC)
+#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0)
+#define BIST1_CFG_CTR (MISC_BASE + 0x0F4)
+#define BIST2_CFG_CTR (MISC_BASE + 0x0F8)
+#define BIST3_CFG_CTR (MISC_BASE + 0x0FC)
+#define BIST4_CFG_CTR (MISC_BASE + 0x100)
+#define BIST5_CFG_CTR (MISC_BASE + 0x104)
+#define BIST1_STS_RES (MISC_BASE + 0x108)
+#define BIST2_STS_RES (MISC_BASE + 0x10C)
+#define BIST3_STS_RES (MISC_BASE + 0x110)
+#define BIST4_STS_RES (MISC_BASE + 0x114)
+#define BIST5_STS_RES (MISC_BASE + 0x118)
+#define SYSERR_CFG_CTR (MISC_BASE + 0x11C)
#endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/spear.h b/arch/arm/mach-spear6xx/include/mach/spear.h
index a835f5b6b18..7fd621532de 100644
--- a/arch/arm/mach-spear6xx/include/mach/spear.h
+++ b/arch/arm/mach-spear6xx/include/mach/spear.h
@@ -14,153 +14,70 @@
#ifndef __MACH_SPEAR6XX_H
#define __MACH_SPEAR6XX_H
-#include <mach/hardware.h>
+#include <asm/memory.h>
#include <mach/spear600.h>
-#define SPEAR6XX_ML_SDRAM_BASE 0x00000000
-#define SPEAR6XX_ML_SDRAM_SIZE 0x40000000
-
+#define SPEAR6XX_ML_SDRAM_BASE UL(0x00000000)
/* ICM1 - Low speed connection */
-#define SPEAR6XX_ICM1_BASE 0xD0000000
-#define SPEAR6XX_ICM1_SIZE 0x08000000
+#define SPEAR6XX_ICM1_BASE UL(0xD0000000)
-#define SPEAR6XX_ICM1_UART0_BASE 0xD0000000
+#define SPEAR6XX_ICM1_UART0_BASE UL(0xD0000000)
#define VA_SPEAR6XX_ICM1_UART0_BASE IO_ADDRESS(SPEAR6XX_ICM1_UART0_BASE)
-#define SPEAR6XX_ICM1_UART0_SIZE 0x00080000
-
-#define SPEAR6XX_ICM1_UART1_BASE 0xD0080000
-#define SPEAR6XX_ICM1_UART1_SIZE 0x00080000
-
-#define SPEAR6XX_ICM1_SSP0_BASE 0xD0100000
-#define SPEAR6XX_ICM1_SSP0_SIZE 0x00080000
-
-#define SPEAR6XX_ICM1_SSP1_BASE 0xD0180000
-#define SPEAR6XX_ICM1_SSP1_SIZE 0x00080000
-
-#define SPEAR6XX_ICM1_I2C_BASE 0xD0200000
-#define SPEAR6XX_ICM1_I2C_SIZE 0x00080000
-#define SPEAR6XX_ICM1_JPEG_BASE 0xD0800000
-#define SPEAR6XX_ICM1_JPEG_SIZE 0x00800000
-
-#define SPEAR6XX_ICM1_IRDA_BASE 0xD1000000
-#define SPEAR6XX_ICM1_IRDA_SIZE 0x00800000
-
-#define SPEAR6XX_ICM1_FSMC_BASE 0xD1800000
-#define SPEAR6XX_ICM1_FSMC_SIZE 0x00800000
-
-#define SPEAR6XX_ICM1_NAND_BASE 0xD2000000
-#define SPEAR6XX_ICM1_NAND_SIZE 0x00800000
-
-#define SPEAR6XX_ICM1_SRAM_BASE 0xD2800000
-#define SPEAR6XX_ICM1_SRAM_SIZE 0x00800000
+#define SPEAR6XX_ICM1_UART1_BASE UL(0xD0080000)
+#define SPEAR6XX_ICM1_SSP0_BASE UL(0xD0100000)
+#define SPEAR6XX_ICM1_SSP1_BASE UL(0xD0180000)
+#define SPEAR6XX_ICM1_I2C_BASE UL(0xD0200000)
+#define SPEAR6XX_ICM1_JPEG_BASE UL(0xD0800000)
+#define SPEAR6XX_ICM1_IRDA_BASE UL(0xD1000000)
+#define SPEAR6XX_ICM1_FSMC_BASE UL(0xD1800000)
+#define SPEAR6XX_ICM1_NAND_BASE UL(0xD2000000)
+#define SPEAR6XX_ICM1_SRAM_BASE UL(0xD2800000)
/* ICM2 - Application Subsystem */
-#define SPEAR6XX_ICM2_BASE 0xD8000000
-#define SPEAR6XX_ICM2_SIZE 0x08000000
-
-#define SPEAR6XX_ICM2_TMR0_BASE 0xD8000000
-#define SPEAR6XX_ICM2_TMR0_SIZE 0x00080000
-
-#define SPEAR6XX_ICM2_TMR1_BASE 0xD8080000
-#define SPEAR6XX_ICM2_TMR1_SIZE 0x00080000
-
-#define SPEAR6XX_ICM2_GPIO_BASE 0xD8100000
-#define SPEAR6XX_ICM2_GPIO_SIZE 0x00080000
-
-#define SPEAR6XX_ICM2_SPI2_BASE 0xD8180000
-#define SPEAR6XX_ICM2_SPI2_SIZE 0x00080000
-
-#define SPEAR6XX_ICM2_ADC_BASE 0xD8200000
-#define SPEAR6XX_ICM2_ADC_SIZE 0x00080000
+#define SPEAR6XX_ICM2_BASE UL(0xD8000000)
+#define SPEAR6XX_ICM2_TMR0_BASE UL(0xD8000000)
+#define SPEAR6XX_ICM2_TMR1_BASE UL(0xD8080000)
+#define SPEAR6XX_ICM2_GPIO_BASE UL(0xD8100000)
+#define SPEAR6XX_ICM2_SSP2_BASE UL(0xD8180000)
+#define SPEAR6XX_ICM2_ADC_BASE UL(0xD8200000)
/* ML-1, 2 - Multi Layer CPU Subsystem */
-#define SPEAR6XX_ML_CPU_BASE 0xF0000000
-#define SPEAR6XX_ML_CPU_SIZE 0x08000000
-
-#define SPEAR6XX_CPU_TMR_BASE 0xF0000000
-#define SPEAR6XX_CPU_TMR_SIZE 0x00100000
-
-#define SPEAR6XX_CPU_GPIO_BASE 0xF0100000
-#define SPEAR6XX_CPU_GPIO_SIZE 0x00100000
-
-#define SPEAR6XX_CPU_VIC_SEC_BASE 0xF1000000
+#define SPEAR6XX_ML_CPU_BASE UL(0xF0000000)
+#define SPEAR6XX_CPU_TMR_BASE UL(0xF0000000)
+#define SPEAR6XX_CPU_GPIO_BASE UL(0xF0100000)
+#define SPEAR6XX_CPU_VIC_SEC_BASE UL(0xF1000000)
#define VA_SPEAR6XX_CPU_VIC_SEC_BASE IO_ADDRESS(SPEAR6XX_CPU_VIC_SEC_BASE)
-#define SPEAR6XX_CPU_VIC_SEC_SIZE 0x00100000
-
-#define SPEAR6XX_CPU_VIC_PRI_BASE 0xF1100000
+#define SPEAR6XX_CPU_VIC_PRI_BASE UL(0xF1100000)
#define VA_SPEAR6XX_CPU_VIC_PRI_BASE IO_ADDRESS(SPEAR6XX_CPU_VIC_PRI_BASE)
-#define SPEAR6XX_CPU_VIC_PRI_SIZE 0x00100000
/* ICM3 - Basic Subsystem */
-#define SPEAR6XX_ICM3_BASE 0xF8000000
-#define SPEAR6XX_ICM3_SIZE 0x08000000
-
-#define SPEAR6XX_ICM3_SMEM_BASE 0xF8000000
-#define SPEAR6XX_ICM3_SMEM_SIZE 0x04000000
-
-#define SPEAR6XX_ICM3_SMI_CTRL_BASE 0xFC000000
-#define SPEAR6XX_ICM3_SMI_CTRL_SIZE 0x00200000
-
-#define SPEAR6XX_ICM3_CLCD_BASE 0xFC200000
-#define SPEAR6XX_ICM3_CLCD_SIZE 0x00200000
-
-#define SPEAR6XX_ICM3_DMA_BASE 0xFC400000
-#define SPEAR6XX_ICM3_DMA_SIZE 0x00200000
-
-#define SPEAR6XX_ICM3_SDRAM_CTRL_BASE 0xFC600000
-#define SPEAR6XX_ICM3_SDRAM_CTRL_SIZE 0x00200000
-
-#define SPEAR6XX_ICM3_TMR_BASE 0xFC800000
-#define SPEAR6XX_ICM3_TMR_SIZE 0x00080000
-
-#define SPEAR6XX_ICM3_WDT_BASE 0xFC880000
-#define SPEAR6XX_ICM3_WDT_SIZE 0x00080000
-
-#define SPEAR6XX_ICM3_RTC_BASE 0xFC900000
-#define SPEAR6XX_ICM3_RTC_SIZE 0x00080000
-
-#define SPEAR6XX_ICM3_GPIO_BASE 0xFC980000
-#define SPEAR6XX_ICM3_GPIO_SIZE 0x00080000
-
-#define SPEAR6XX_ICM3_SYS_CTRL_BASE 0xFCA00000
+#define SPEAR6XX_ICM3_BASE UL(0xF8000000)
+#define SPEAR6XX_ICM3_SMEM_BASE UL(0xF8000000)
+#define SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
+#define SPEAR6XX_ICM3_CLCD_BASE UL(0xFC200000)
+#define SPEAR6XX_ICM3_DMA_BASE UL(0xFC400000)
+#define SPEAR6XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000)
+#define SPEAR6XX_ICM3_TMR_BASE UL(0xFC800000)
+#define SPEAR6XX_ICM3_WDT_BASE UL(0xFC880000)
+#define SPEAR6XX_ICM3_RTC_BASE UL(0xFC900000)
+#define SPEAR6XX_ICM3_GPIO_BASE UL(0xFC980000)
+#define SPEAR6XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000)
#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR6XX_ICM3_SYS_CTRL_BASE)
-#define SPEAR6XX_ICM3_SYS_CTRL_SIZE 0x00080000
-
-#define SPEAR6XX_ICM3_MISC_REG_BASE 0xFCA80000
+#define SPEAR6XX_ICM3_MISC_REG_BASE UL(0xFCA80000)
#define VA_SPEAR6XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR6XX_ICM3_MISC_REG_BASE)
-#define SPEAR6XX_ICM3_MISC_REG_SIZE 0x00080000
/* ICM4 - High Speed Connection */
-#define SPEAR6XX_ICM4_BASE 0xE0000000
-#define SPEAR6XX_ICM4_SIZE 0x08000000
-
-#define SPEAR6XX_ICM4_GMAC_BASE 0xE0800000
-#define SPEAR6XX_ICM4_GMAC_SIZE 0x00800000
-
-#define SPEAR6XX_ICM4_USBD_FIFO_BASE 0xE1000000
-#define SPEAR6XX_ICM4_USBD_FIFO_SIZE 0x00100000
-
-#define SPEAR6XX_ICM4_USBD_CSR_BASE 0xE1100000
-#define SPEAR6XX_ICM4_USBD_CSR_SIZE 0x00100000
-
-#define SPEAR6XX_ICM4_USBD_PLDT_BASE 0xE1200000
-#define SPEAR6XX_ICM4_USBD_PLDT_SIZE 0x00100000
-
-#define SPEAR6XX_ICM4_USB_EHCI0_BASE 0xE1800000
-#define SPEAR6XX_ICM4_USB_EHCI0_SIZE 0x00100000
-
-#define SPEAR6XX_ICM4_USB_OHCI0_BASE 0xE1900000
-#define SPEAR6XX_ICM4_USB_OHCI0_SIZE 0x00100000
-
-#define SPEAR6XX_ICM4_USB_EHCI1_BASE 0xE2000000
-#define SPEAR6XX_ICM4_USB_EHCI1_SIZE 0x00100000
-
-#define SPEAR6XX_ICM4_USB_OHCI1_BASE 0xE2100000
-#define SPEAR6XX_ICM4_USB_OHCI1_SIZE 0x00100000
-
-#define SPEAR6XX_ICM4_USB_ARB_BASE 0xE2800000
-#define SPEAR6XX_ICM4_USB_ARB_SIZE 0x00010000
+#define SPEAR6XX_ICM4_BASE UL(0xE0000000)
+#define SPEAR6XX_ICM4_GMAC_BASE UL(0xE0800000)
+#define SPEAR6XX_ICM4_USBD_FIFO_BASE UL(0xE1000000)
+#define SPEAR6XX_ICM4_USBD_CSR_BASE UL(0xE1100000)
+#define SPEAR6XX_ICM4_USBD_PLDT_BASE UL(0xE1200000)
+#define SPEAR6XX_ICM4_USB_EHCI0_BASE UL(0xE1800000)
+#define SPEAR6XX_ICM4_USB_OHCI0_BASE UL(0xE1900000)
+#define SPEAR6XX_ICM4_USB_EHCI1_BASE UL(0xE2000000)
+#define SPEAR6XX_ICM4_USB_OHCI1_BASE UL(0xE2100000)
+#define SPEAR6XX_ICM4_USB_ARB_BASE UL(0xE2800000)
/* Debug uart for linux, will be used for debug and uncompress messages */
#define SPEAR_DBG_UART_BASE SPEAR6XX_ICM1_UART0_BASE
diff --git a/arch/arm/mach-spear6xx/spear600.c b/arch/arm/mach-spear6xx/spear600.c
index 5c484c433dc..d0e6eeae9b0 100644
--- a/arch/arm/mach-spear6xx/spear600.c
+++ b/arch/arm/mach-spear6xx/spear600.c
@@ -14,7 +14,7 @@
#include <linux/ptrace.h>
#include <asm/irq.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* Add spear600 specific devices here */
diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c
index daff8d04f7b..f19cefe91a2 100644
--- a/arch/arm/mach-spear6xx/spear600_evb.c
+++ b/arch/arm/mach-spear6xx/spear600_evb.c
@@ -14,7 +14,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
static struct amba_device *amba_devs[] __initdata = {
&gpio_device[0],
@@ -46,6 +46,6 @@ MACHINE_START(SPEAR600, "ST-SPEAR600-EVB")
.boot_params = 0x00000100,
.map_io = spear6xx_map_io,
.init_irq = spear6xx_init_irq,
- .timer = &spear_sys_timer,
+ .timer = &spear6xx_timer,
.init_machine = spear600_evb_init,
MACHINE_END
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index f2fe14e8471..981812961ac 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -18,9 +18,9 @@
#include <asm/hardware/vic.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
-#include <mach/irqs.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
/* Add spear6xx machines common devices here */
/* uart device registration */
@@ -31,8 +31,7 @@ struct amba_device uart_device[] = {
},
.res = {
.start = SPEAR6XX_ICM1_UART0_BASE,
- .end = SPEAR6XX_ICM1_UART0_BASE +
- SPEAR6XX_ICM1_UART0_SIZE - 1,
+ .end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_UART_0, NO_IRQ},
@@ -42,8 +41,7 @@ struct amba_device uart_device[] = {
},
.res = {
.start = SPEAR6XX_ICM1_UART1_BASE,
- .end = SPEAR6XX_ICM1_UART1_BASE +
- SPEAR6XX_ICM1_UART1_SIZE - 1,
+ .end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_UART_1, NO_IRQ},
@@ -72,8 +70,7 @@ struct amba_device gpio_device[] = {
},
.res = {
.start = SPEAR6XX_CPU_GPIO_BASE,
- .end = SPEAR6XX_CPU_GPIO_BASE +
- SPEAR6XX_CPU_GPIO_SIZE - 1,
+ .end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_LOCAL_GPIO, NO_IRQ},
@@ -84,8 +81,7 @@ struct amba_device gpio_device[] = {
},
.res = {
.start = SPEAR6XX_ICM3_GPIO_BASE,
- .end = SPEAR6XX_ICM3_GPIO_BASE +
- SPEAR6XX_ICM3_GPIO_SIZE - 1,
+ .end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_BASIC_GPIO, NO_IRQ},
@@ -96,8 +92,7 @@ struct amba_device gpio_device[] = {
},
.res = {
.start = SPEAR6XX_ICM2_GPIO_BASE,
- .end = SPEAR6XX_ICM2_GPIO_BASE +
- SPEAR6XX_ICM2_GPIO_SIZE - 1,
+ .end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_APPL_GPIO, NO_IRQ},
@@ -122,27 +117,27 @@ static struct map_desc spear6xx_io_desc[] __initdata = {
{
.virtual = VA_SPEAR6XX_ICM1_UART0_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE),
- .length = SPEAR6XX_ICM1_UART0_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_CPU_VIC_PRI_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE),
- .length = SPEAR6XX_CPU_VIC_PRI_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_CPU_VIC_SEC_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE),
- .length = SPEAR6XX_CPU_VIC_SEC_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_ICM3_SYS_CTRL_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE),
- .length = SPEAR6XX_ICM3_MISC_REG_BASE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_ICM3_MISC_REG_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE),
- .length = SPEAR6XX_ICM3_MISC_REG_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
},
};
@@ -155,3 +150,34 @@ void __init spear6xx_map_io(void)
/* This will initialize clock framework */
clk_init();
}
+
+static void __init spear6xx_timer_init(void)
+{
+ char pclk_name[] = "pll3_48m_clk";
+ struct clk *gpt_clk, *pclk;
+
+ /* get the system timer clock */
+ gpt_clk = clk_get_sys("gpt0", NULL);
+ if (IS_ERR(gpt_clk)) {
+ pr_err("%s:couldn't get clk for gpt\n", __func__);
+ BUG();
+ }
+
+ /* get the suitable parent clock for timer*/
+ pclk = clk_get(NULL, pclk_name);
+ if (IS_ERR(pclk)) {
+ pr_err("%s:couldn't get %s as parent for gpt\n",
+ __func__, pclk_name);
+ BUG();
+ }
+
+ clk_set_parent(gpt_clk, pclk);
+ clk_put(gpt_clk);
+ clk_put(pclk);
+
+ spear_setup_timer();
+}
+
+struct sys_timer spear6xx_timer = {
+ .init = spear6xx_timer_init,
+};
diff --git a/arch/arm/mach-tegra/include/mach/kbc.h b/arch/arm/mach-tegra/include/mach/kbc.h
index 66ad2760c62..04c779832c7 100644
--- a/arch/arm/mach-tegra/include/mach/kbc.h
+++ b/arch/arm/mach-tegra/include/mach/kbc.h
@@ -57,5 +57,6 @@ struct tegra_kbc_platform_data {
const struct matrix_keymap_data *keymap_data;
bool wakeup;
+ bool use_fn_map;
};
#endif
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 247caa3400d..203b986280f 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -6,6 +6,7 @@ config UX500_SOC_COMMON
select ARM_GIC
select HAS_MTU
select NOMADIK_GPIO
+ select ARM_ERRATA_753970
menu "Ux500 SoC"
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
new file mode 100644
index 00000000000..2c20a341c11
--- /dev/null
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -0,0 +1,73 @@
+if ARCH_VT8500
+
+config VTWM_VERSION_VT8500
+ bool
+
+config VTWM_VERSION_WM8505
+ bool
+
+config MACH_BV07
+ bool "Benign BV07-8500 Mini Netbook"
+ depends on ARCH_VT8500
+ select VTWM_VERSION_VT8500
+ help
+ Add support for the inexpensive 7-inch netbooks sold by many
+ Chinese distributors under various names. Note that there are
+ many hardware implementations in identical exterior, make sure
+ that yours is indeed based on a VIA VT8500 chip.
+
+config MACH_WM8505_7IN_NETBOOK
+ bool "WM8505 7-inch generic netbook"
+ depends on ARCH_VT8500
+ select VTWM_VERSION_WM8505
+ help
+ Add support for the inexpensive 7-inch netbooks sold by many
+ Chinese distributors under various names. Note that there are
+ many hardware implementations in identical exterior, make sure
+ that yours is indeed based on a WonderMedia WM8505 chip.
+
+comment "LCD panel size"
+
+config WMT_PANEL_800X480
+ bool "7-inch with 800x480 resolution"
+ depends on (FB_VT8500 || FB_WM8505)
+ default y
+ help
+ These are found in most of the netbooks in generic cases, as
+ well as in Eken M001 tablets and possibly elsewhere.
+
+ To select this panel at runtime, say y here and append
+ 'panel=800x480' to your kernel command line. Otherwise, the
+ largest one available will be used.
+
+config WMT_PANEL_800X600
+ bool "8-inch with 800x600 resolution"
+ depends on (FB_VT8500 || FB_WM8505)
+ help
+ These are found in Eken M003 tablets and possibly elsewhere.
+
+ To select this panel at runtime, say y here and append
+ 'panel=800x600' to your kernel command line. Otherwise, the
+ largest one available will be used.
+
+config WMT_PANEL_1024X576
+ bool "10-inch with 1024x576 resolution"
+ depends on (FB_VT8500 || FB_WM8505)
+ help
+ These are found in CherryPal netbooks and possibly elsewhere.
+
+ To select this panel at runtime, say y here and append
+ 'panel=1024x576' to your kernel command line. Otherwise, the
+ largest one available will be used.
+
+config WMT_PANEL_1024X600
+ bool "10-inch with 1024x600 resolution"
+ depends on (FB_VT8500 || FB_WM8505)
+ help
+ These are found in Eken M006 tablets and possibly elsewhere.
+
+ To select this panel at runtime, say y here and append
+ 'panel=1024x600' to your kernel command line. Otherwise, the
+ largest one available will be used.
+
+endif
diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile
new file mode 100644
index 00000000000..81aedb7c893
--- /dev/null
+++ b/arch/arm/mach-vt8500/Makefile
@@ -0,0 +1,9 @@
+obj-y += devices.o gpio.o irq.o timer.o
+
+obj-$(CONFIG_VTWM_VERSION_VT8500) += devices-vt8500.o
+obj-$(CONFIG_VTWM_VERSION_WM8505) += devices-wm8505.o
+
+obj-$(CONFIG_MACH_BV07) += bv07.o
+obj-$(CONFIG_MACH_WM8505_7IN_NETBOOK) += wm8505_7in.o
+
+obj-$(CONFIG_HAVE_PWM) += pwm.o
diff --git a/arch/arm/mach-vt8500/Makefile.boot b/arch/arm/mach-vt8500/Makefile.boot
new file mode 100644
index 00000000000..a8acc4e2490
--- /dev/null
+++ b/arch/arm/mach-vt8500/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x01000000
diff --git a/arch/arm/mach-vt8500/bv07.c b/arch/arm/mach-vt8500/bv07.c
new file mode 100644
index 00000000000..94a261d86bf
--- /dev/null
+++ b/arch/arm/mach-vt8500/bv07.c
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/mach-vt8500/bv07.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/io.h>
+#include <linux/pm.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "devices.h"
+
+static void __iomem *pmc_hiber;
+
+static struct platform_device *devices[] __initdata = {
+ &vt8500_device_uart0,
+ &vt8500_device_lcdc,
+ &vt8500_device_ehci,
+ &vt8500_device_ge_rops,
+ &vt8500_device_pwm,
+ &vt8500_device_pwmbl,
+ &vt8500_device_rtc,
+};
+
+static void vt8500_power_off(void)
+{
+ local_irq_disable();
+ writew(5, pmc_hiber);
+ asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0));
+}
+
+void __init bv07_init(void)
+{
+#ifdef CONFIG_FB_VT8500
+ void __iomem *gpio_mux_reg = ioremap(wmt_gpio_base + 0x200, 4);
+ if (gpio_mux_reg) {
+ writel(readl(gpio_mux_reg) | 1, gpio_mux_reg);
+ iounmap(gpio_mux_reg);
+ } else {
+ printk(KERN_ERR "Could not remap the GPIO mux register, display may not work properly!\n");
+ }
+#endif
+ pmc_hiber = ioremap(wmt_pmc_base + 0x12, 2);
+ if (pmc_hiber)
+ pm_power_off = &vt8500_power_off;
+ else
+ printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n");
+
+ vt8500_set_resources();
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ vt8500_gpio_init();
+}
+
+MACHINE_START(BV07, "Benign BV07 Mini Netbook")
+ .boot_params = 0x00000100,
+ .reserve = vt8500_reserve_mem,
+ .map_io = vt8500_map_io,
+ .init_irq = vt8500_init_irq,
+ .timer = &vt8500_timer,
+ .init_machine = bv07_init,
+MACHINE_END
diff --git a/arch/arm/mach-vt8500/devices-vt8500.c b/arch/arm/mach-vt8500/devices-vt8500.c
new file mode 100644
index 00000000000..19519aeecf3
--- /dev/null
+++ b/arch/arm/mach-vt8500/devices-vt8500.c
@@ -0,0 +1,91 @@
+/* linux/arch/arm/mach-vt8500/devices-vt8500.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+
+#include <mach/vt8500_regs.h>
+#include <mach/vt8500_irqs.h>
+#include <mach/i8042.h>
+#include "devices.h"
+
+void __init vt8500_set_resources(void)
+{
+ struct resource tmp[3];
+
+ tmp[0] = wmt_mmio_res(VT8500_LCDC_BASE, SZ_1K);
+ tmp[1] = wmt_irq_res(IRQ_LCDC);
+ wmt_res_add(&vt8500_device_lcdc, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_UART0_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART0);
+ wmt_res_add(&vt8500_device_uart0, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_UART1_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART1);
+ wmt_res_add(&vt8500_device_uart1, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_UART2_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART2);
+ wmt_res_add(&vt8500_device_uart2, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_UART3_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART3);
+ wmt_res_add(&vt8500_device_uart3, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_EHCI_BASE, SZ_512);
+ tmp[1] = wmt_irq_res(IRQ_EHCI);
+ wmt_res_add(&vt8500_device_ehci, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_GEGEA_BASE, SZ_256);
+ wmt_res_add(&vt8500_device_ge_rops, tmp, 1);
+
+ tmp[0] = wmt_mmio_res(VT8500_PWM_BASE, 0x44);
+ wmt_res_add(&vt8500_device_pwm, tmp, 1);
+
+ tmp[0] = wmt_mmio_res(VT8500_RTC_BASE, 0x2c);
+ tmp[1] = wmt_irq_res(IRQ_RTC);
+ tmp[2] = wmt_irq_res(IRQ_RTCSM);
+ wmt_res_add(&vt8500_device_rtc, tmp, 3);
+}
+
+static void __init vt8500_set_externs(void)
+{
+ /* Non-resource-aware stuff */
+ wmt_ic_base = VT8500_IC_BASE;
+ wmt_gpio_base = VT8500_GPIO_BASE;
+ wmt_pmc_base = VT8500_PMC_BASE;
+ wmt_i8042_base = VT8500_PS2_BASE;
+
+ wmt_nr_irqs = VT8500_NR_IRQS;
+ wmt_timer_irq = IRQ_PMCOS0;
+ wmt_gpio_ext_irq[0] = IRQ_EXT0;
+ wmt_gpio_ext_irq[1] = IRQ_EXT1;
+ wmt_gpio_ext_irq[2] = IRQ_EXT2;
+ wmt_gpio_ext_irq[3] = IRQ_EXT3;
+ wmt_gpio_ext_irq[4] = IRQ_EXT4;
+ wmt_gpio_ext_irq[5] = IRQ_EXT5;
+ wmt_gpio_ext_irq[6] = IRQ_EXT6;
+ wmt_gpio_ext_irq[7] = IRQ_EXT7;
+ wmt_i8042_kbd_irq = IRQ_PS2KBD;
+ wmt_i8042_aux_irq = IRQ_PS2MOUSE;
+}
+
+void __init vt8500_map_io(void)
+{
+ iotable_init(wmt_io_desc, ARRAY_SIZE(wmt_io_desc));
+
+ /* Should be done before interrupts and timers are initialized */
+ vt8500_set_externs();
+}
diff --git a/arch/arm/mach-vt8500/devices-wm8505.c b/arch/arm/mach-vt8500/devices-wm8505.c
new file mode 100644
index 00000000000..db4594e029f
--- /dev/null
+++ b/arch/arm/mach-vt8500/devices-wm8505.c
@@ -0,0 +1,99 @@
+/* linux/arch/arm/mach-vt8500/devices-wm8505.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+
+#include <mach/wm8505_regs.h>
+#include <mach/wm8505_irqs.h>
+#include <mach/i8042.h>
+#include "devices.h"
+
+void __init wm8505_set_resources(void)
+{
+ struct resource tmp[3];
+
+ tmp[0] = wmt_mmio_res(WM8505_GOVR_BASE, SZ_512);
+ wmt_res_add(&vt8500_device_wm8505_fb, tmp, 1);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART0_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART0);
+ wmt_res_add(&vt8500_device_uart0, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART1_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART1);
+ wmt_res_add(&vt8500_device_uart1, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART2_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART2);
+ wmt_res_add(&vt8500_device_uart2, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART3_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART3);
+ wmt_res_add(&vt8500_device_uart3, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART4_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART4);
+ wmt_res_add(&vt8500_device_uart4, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART5_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART5);
+ wmt_res_add(&vt8500_device_uart5, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_EHCI_BASE, SZ_512);
+ tmp[1] = wmt_irq_res(IRQ_EHCI);
+ wmt_res_add(&vt8500_device_ehci, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_GEGEA_BASE, SZ_256);
+ wmt_res_add(&vt8500_device_ge_rops, tmp, 1);
+
+ tmp[0] = wmt_mmio_res(WM8505_PWM_BASE, 0x44);
+ wmt_res_add(&vt8500_device_pwm, tmp, 1);
+
+ tmp[0] = wmt_mmio_res(WM8505_RTC_BASE, 0x2c);
+ tmp[1] = wmt_irq_res(IRQ_RTC);
+ tmp[2] = wmt_irq_res(IRQ_RTCSM);
+ wmt_res_add(&vt8500_device_rtc, tmp, 3);
+}
+
+static void __init wm8505_set_externs(void)
+{
+ /* Non-resource-aware stuff */
+ wmt_ic_base = WM8505_IC_BASE;
+ wmt_sic_base = WM8505_SIC_BASE;
+ wmt_gpio_base = WM8505_GPIO_BASE;
+ wmt_pmc_base = WM8505_PMC_BASE;
+ wmt_i8042_base = WM8505_PS2_BASE;
+
+ wmt_nr_irqs = WM8505_NR_IRQS;
+ wmt_timer_irq = IRQ_PMCOS0;
+ wmt_gpio_ext_irq[0] = IRQ_EXT0;
+ wmt_gpio_ext_irq[1] = IRQ_EXT1;
+ wmt_gpio_ext_irq[2] = IRQ_EXT2;
+ wmt_gpio_ext_irq[3] = IRQ_EXT3;
+ wmt_gpio_ext_irq[4] = IRQ_EXT4;
+ wmt_gpio_ext_irq[5] = IRQ_EXT5;
+ wmt_gpio_ext_irq[6] = IRQ_EXT6;
+ wmt_gpio_ext_irq[7] = IRQ_EXT7;
+ wmt_i8042_kbd_irq = IRQ_PS2KBD;
+ wmt_i8042_aux_irq = IRQ_PS2MOUSE;
+}
+
+void __init wm8505_map_io(void)
+{
+ iotable_init(wmt_io_desc, ARRAY_SIZE(wmt_io_desc));
+
+ /* Should be done before interrupts and timers are initialized */
+ wm8505_set_externs();
+}
diff --git a/arch/arm/mach-vt8500/devices.c b/arch/arm/mach-vt8500/devices.c
new file mode 100644
index 00000000000..1fcdc36b358
--- /dev/null
+++ b/arch/arm/mach-vt8500/devices.c
@@ -0,0 +1,270 @@
+/* linux/arch/arm/mach-vt8500/devices.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/memblock.h>
+
+#include <asm/mach/arch.h>
+
+#include <mach/vt8500fb.h>
+#include <mach/i8042.h>
+#include "devices.h"
+
+/* These can't use resources currently */
+unsigned long wmt_ic_base __initdata;
+unsigned long wmt_sic_base __initdata;
+unsigned long wmt_gpio_base __initdata;
+unsigned long wmt_pmc_base __initdata;
+unsigned long wmt_i8042_base __initdata;
+
+int wmt_nr_irqs __initdata;
+int wmt_timer_irq __initdata;
+int wmt_gpio_ext_irq[8] __initdata;
+
+/* Should remain accessible after init.
+ * i8042 driver desperately calls for attention...
+ */
+int wmt_i8042_kbd_irq;
+int wmt_i8042_aux_irq;
+
+static u64 fb_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device vt8500_device_lcdc = {
+ .name = "vt8500-lcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = &fb_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+struct platform_device vt8500_device_wm8505_fb = {
+ .name = "wm8505-fb",
+ .id = 0,
+};
+
+/* Smallest to largest */
+static struct vt8500fb_platform_data panels[] = {
+#ifdef CONFIG_WMT_PANEL_800X480
+{
+ .xres_virtual = 800,
+ .yres_virtual = 480 * 2,
+ .mode = {
+ .name = "800x480",
+ .xres = 800,
+ .yres = 480,
+ .left_margin = 88,
+ .right_margin = 40,
+ .upper_margin = 32,
+ .lower_margin = 11,
+ .hsync_len = 0,
+ .vsync_len = 1,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+},
+#endif
+#ifdef CONFIG_WMT_PANEL_800X600
+{
+ .xres_virtual = 800,
+ .yres_virtual = 600 * 2,
+ .mode = {
+ .name = "800x600",
+ .xres = 800,
+ .yres = 600,
+ .left_margin = 88,
+ .right_margin = 40,
+ .upper_margin = 32,
+ .lower_margin = 11,
+ .hsync_len = 0,
+ .vsync_len = 1,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+},
+#endif
+#ifdef CONFIG_WMT_PANEL_1024X576
+{
+ .xres_virtual = 1024,
+ .yres_virtual = 576 * 2,
+ .mode = {
+ .name = "1024x576",
+ .xres = 1024,
+ .yres = 576,
+ .left_margin = 40,
+ .right_margin = 24,
+ .upper_margin = 32,
+ .lower_margin = 11,
+ .hsync_len = 96,
+ .vsync_len = 2,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+},
+#endif
+#ifdef CONFIG_WMT_PANEL_1024X600
+{
+ .xres_virtual = 1024,
+ .yres_virtual = 600 * 2,
+ .mode = {
+ .name = "1024x600",
+ .xres = 1024,
+ .yres = 600,
+ .left_margin = 66,
+ .right_margin = 2,
+ .upper_margin = 19,
+ .lower_margin = 1,
+ .hsync_len = 23,
+ .vsync_len = 8,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+},
+#endif
+};
+
+static int current_panel_idx __initdata = ARRAY_SIZE(panels) - 1;
+
+static int __init panel_setup(char *str)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(panels); i++) {
+ if (strcmp(panels[i].mode.name, str) == 0) {
+ current_panel_idx = i;
+ break;
+ }
+ }
+ return 0;
+}
+
+early_param("panel", panel_setup);
+
+static inline void preallocate_fb(struct vt8500fb_platform_data *p,
+ unsigned long align) {
+ p->video_mem_len = (p->xres_virtual * p->yres_virtual * 4) >>
+ (p->bpp > 16 ? 0 : (p->bpp > 8 ? 1 :
+ (8 / p->bpp) + 1));
+ p->video_mem_phys = (unsigned long)memblock_alloc(p->video_mem_len,
+ align);
+ p->video_mem_virt = phys_to_virt(p->video_mem_phys);
+}
+
+struct platform_device vt8500_device_uart0 = {
+ .name = "vt8500_serial",
+ .id = 0,
+};
+
+struct platform_device vt8500_device_uart1 = {
+ .name = "vt8500_serial",
+ .id = 1,
+};
+
+struct platform_device vt8500_device_uart2 = {
+ .name = "vt8500_serial",
+ .id = 2,
+};
+
+struct platform_device vt8500_device_uart3 = {
+ .name = "vt8500_serial",
+ .id = 3,
+};
+
+struct platform_device vt8500_device_uart4 = {
+ .name = "vt8500_serial",
+ .id = 4,
+};
+
+struct platform_device vt8500_device_uart5 = {
+ .name = "vt8500_serial",
+ .id = 5,
+};
+
+static u64 ehci_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device vt8500_device_ehci = {
+ .name = "vt8500-ehci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ehci_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+struct platform_device vt8500_device_ge_rops = {
+ .name = "wmt_ge_rops",
+ .id = -1,
+};
+
+struct platform_device vt8500_device_pwm = {
+ .name = "vt8500-pwm",
+ .id = 0,
+};
+
+static struct platform_pwm_backlight_data vt8500_pwmbl_data = {
+ .pwm_id = 0,
+ .max_brightness = 128,
+ .dft_brightness = 70,
+ .pwm_period_ns = 250000, /* revisit when clocks are implemented */
+};
+
+struct platform_device vt8500_device_pwmbl = {
+ .name = "pwm-backlight",
+ .id = 0,
+ .dev = {
+ .platform_data = &vt8500_pwmbl_data,
+ },
+};
+
+struct platform_device vt8500_device_rtc = {
+ .name = "vt8500-rtc",
+ .id = 0,
+};
+
+struct map_desc wmt_io_desc[] __initdata = {
+ /* SoC MMIO registers */
+ [0] = {
+ .virtual = 0xf8000000,
+ .pfn = __phys_to_pfn(0xd8000000),
+ .length = 0x00390000, /* max of all chip variants */
+ .type = MT_DEVICE
+ },
+ /* PCI I/O space, numbers tied to those in <mach/io.h> */
+ [1] = {
+ .virtual = 0xf0000000,
+ .pfn = __phys_to_pfn(0xc0000000),
+ .length = SZ_64K,
+ .type = MT_DEVICE
+ },
+};
+
+void __init vt8500_reserve_mem(void)
+{
+#ifdef CONFIG_FB_VT8500
+ panels[current_panel_idx].bpp = 16; /* Always use RGB565 */
+ preallocate_fb(&panels[current_panel_idx], SZ_4M);
+ vt8500_device_lcdc.dev.platform_data = &panels[current_panel_idx];
+#endif
+}
+
+void __init wm8505_reserve_mem(void)
+{
+#if defined CONFIG_FB_WM8505
+ panels[current_panel_idx].bpp = 32; /* Always use RGB888 */
+ preallocate_fb(&panels[current_panel_idx], 32);
+ vt8500_device_wm8505_fb.dev.platform_data = &panels[current_panel_idx];
+#endif
+}
diff --git a/arch/arm/mach-vt8500/devices.h b/arch/arm/mach-vt8500/devices.h
new file mode 100644
index 00000000000..188d4e17f35
--- /dev/null
+++ b/arch/arm/mach-vt8500/devices.h
@@ -0,0 +1,88 @@
+/* linux/arch/arm/mach-vt8500/devices.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_VT8500_DEVICES_H
+#define __ARCH_ARM_MACH_VT8500_DEVICES_H
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+
+void __init vt8500_init_irq(void);
+void __init wm8505_init_irq(void);
+void __init vt8500_map_io(void);
+void __init wm8505_map_io(void);
+void __init vt8500_reserve_mem(void);
+void __init wm8505_reserve_mem(void);
+void __init vt8500_gpio_init(void);
+void __init vt8500_set_resources(void);
+void __init wm8505_set_resources(void);
+
+extern unsigned long wmt_ic_base __initdata;
+extern unsigned long wmt_sic_base __initdata;
+extern unsigned long wmt_gpio_base __initdata;
+extern unsigned long wmt_pmc_base __initdata;
+
+extern int wmt_nr_irqs __initdata;
+extern int wmt_timer_irq __initdata;
+extern int wmt_gpio_ext_irq[8] __initdata;
+
+extern struct map_desc wmt_io_desc[2] __initdata;
+
+static inline struct resource wmt_mmio_res(u32 start, u32 size)
+{
+ struct resource tmp = {
+ .flags = IORESOURCE_MEM,
+ .start = start,
+ .end = start + size - 1,
+ };
+
+ return tmp;
+}
+
+static inline struct resource wmt_irq_res(int irq)
+{
+ struct resource tmp = {
+ .flags = IORESOURCE_IRQ,
+ .start = irq,
+ .end = irq,
+ };
+
+ return tmp;
+}
+
+static inline void wmt_res_add(struct platform_device *pdev,
+ const struct resource *res, unsigned int num)
+{
+ if (unlikely(platform_device_add_resources(pdev, res, num)))
+ pr_err("Failed to assign resources\n");
+}
+
+extern struct sys_timer vt8500_timer;
+
+extern struct platform_device vt8500_device_uart0;
+extern struct platform_device vt8500_device_uart1;
+extern struct platform_device vt8500_device_uart2;
+extern struct platform_device vt8500_device_uart3;
+extern struct platform_device vt8500_device_uart4;
+extern struct platform_device vt8500_device_uart5;
+
+extern struct platform_device vt8500_device_lcdc;
+extern struct platform_device vt8500_device_wm8505_fb;
+extern struct platform_device vt8500_device_ehci;
+extern struct platform_device vt8500_device_ge_rops;
+extern struct platform_device vt8500_device_pwm;
+extern struct platform_device vt8500_device_pwmbl;
+extern struct platform_device vt8500_device_rtc;
+#endif
diff --git a/arch/arm/mach-vt8500/gpio.c b/arch/arm/mach-vt8500/gpio.c
new file mode 100644
index 00000000000..2bcc0ec783d
--- /dev/null
+++ b/arch/arm/mach-vt8500/gpio.c
@@ -0,0 +1,240 @@
+/* linux/arch/arm/mach-vt8500/gpio.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include "devices.h"
+
+#define to_vt8500(__chip) container_of(__chip, struct vt8500_gpio_chip, chip)
+
+#define ENABLE_REGS 0x0
+#define DIRECTION_REGS 0x20
+#define OUTVALUE_REGS 0x40
+#define INVALUE_REGS 0x60
+
+#define EXT_REGOFF 0x1c
+
+static void __iomem *regbase;
+
+struct vt8500_gpio_chip {
+ struct gpio_chip chip;
+ unsigned int shift;
+ unsigned int regoff;
+};
+
+static int gpio_to_irq_map[8];
+
+static int vt8500_muxed_gpio_request(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+ unsigned val = readl(regbase + ENABLE_REGS + vt8500_chip->regoff);
+
+ val |= (1 << vt8500_chip->shift << offset);
+ writel(val, regbase + ENABLE_REGS + vt8500_chip->regoff);
+
+ return 0;
+}
+
+static void vt8500_muxed_gpio_free(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+ unsigned val = readl(regbase + ENABLE_REGS + vt8500_chip->regoff);
+
+ val &= ~(1 << vt8500_chip->shift << offset);
+ writel(val, regbase + ENABLE_REGS + vt8500_chip->regoff);
+}
+
+static int vt8500_muxed_gpio_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+ unsigned val = readl(regbase + DIRECTION_REGS + vt8500_chip->regoff);
+
+ val &= ~(1 << vt8500_chip->shift << offset);
+ writel(val, regbase + DIRECTION_REGS + vt8500_chip->regoff);
+
+ return 0;
+}
+
+static int vt8500_muxed_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+ unsigned val = readl(regbase + DIRECTION_REGS + vt8500_chip->regoff);
+
+ val |= (1 << vt8500_chip->shift << offset);
+ writel(val, regbase + DIRECTION_REGS + vt8500_chip->regoff);
+
+ if (value) {
+ val = readl(regbase + OUTVALUE_REGS + vt8500_chip->regoff);
+ val |= (1 << vt8500_chip->shift << offset);
+ writel(val, regbase + OUTVALUE_REGS + vt8500_chip->regoff);
+ }
+ return 0;
+}
+
+static int vt8500_muxed_gpio_get_value(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+
+ return (readl(regbase + INVALUE_REGS + vt8500_chip->regoff)
+ >> vt8500_chip->shift >> offset) & 1;
+}
+
+static void vt8500_muxed_gpio_set_value(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+ unsigned val = readl(regbase + INVALUE_REGS + vt8500_chip->regoff);
+
+ if (value)
+ val |= (1 << vt8500_chip->shift << offset);
+ else
+ val &= ~(1 << vt8500_chip->shift << offset);
+
+ writel(val, regbase + INVALUE_REGS + vt8500_chip->regoff);
+}
+
+#define VT8500_GPIO_BANK(__name, __shift, __off, __base, __num) \
+{ \
+ .chip = { \
+ .label = __name, \
+ .request = vt8500_muxed_gpio_request, \
+ .free = vt8500_muxed_gpio_free, \
+ .direction_input = vt8500_muxed_gpio_direction_input, \
+ .direction_output = vt8500_muxed_gpio_direction_output, \
+ .get = vt8500_muxed_gpio_get_value, \
+ .set = vt8500_muxed_gpio_set_value, \
+ .can_sleep = 0, \
+ .base = __base, \
+ .ngpio = __num, \
+ }, \
+ .shift = __shift, \
+ .regoff = __off, \
+}
+
+static struct vt8500_gpio_chip vt8500_muxed_gpios[] = {
+ VT8500_GPIO_BANK("uart0", 0, 0x0, 8, 4),
+ VT8500_GPIO_BANK("uart1", 4, 0x0, 12, 4),
+ VT8500_GPIO_BANK("spi0", 8, 0x0, 16, 4),
+ VT8500_GPIO_BANK("spi1", 12, 0x0, 20, 4),
+ VT8500_GPIO_BANK("spi2", 16, 0x0, 24, 4),
+ VT8500_GPIO_BANK("pwmout", 24, 0x0, 28, 2),
+
+ VT8500_GPIO_BANK("sdmmc", 0, 0x4, 30, 11),
+ VT8500_GPIO_BANK("ms", 16, 0x4, 41, 7),
+ VT8500_GPIO_BANK("i2c0", 24, 0x4, 48, 2),
+ VT8500_GPIO_BANK("i2c1", 26, 0x4, 50, 2),
+
+ VT8500_GPIO_BANK("mii", 0, 0x8, 52, 20),
+ VT8500_GPIO_BANK("see", 20, 0x8, 72, 4),
+ VT8500_GPIO_BANK("ide", 24, 0x8, 76, 7),
+
+ VT8500_GPIO_BANK("ccir", 0, 0xc, 83, 19),
+
+ VT8500_GPIO_BANK("ts", 8, 0x10, 102, 11),
+
+ VT8500_GPIO_BANK("lcd", 0, 0x14, 113, 23),
+};
+
+static int vt8500_gpio_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ unsigned val = readl(regbase + DIRECTION_REGS + EXT_REGOFF);
+
+ val &= ~(1 << offset);
+ writel(val, regbase + DIRECTION_REGS + EXT_REGOFF);
+ return 0;
+}
+
+static int vt8500_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ unsigned val = readl(regbase + DIRECTION_REGS + EXT_REGOFF);
+
+ val |= (1 << offset);
+ writel(val, regbase + DIRECTION_REGS + EXT_REGOFF);
+
+ if (value) {
+ val = readl(regbase + OUTVALUE_REGS + EXT_REGOFF);
+ val |= (1 << offset);
+ writel(val, regbase + OUTVALUE_REGS + EXT_REGOFF);
+ }
+ return 0;
+}
+
+static int vt8500_gpio_get_value(struct gpio_chip *chip,
+ unsigned offset)
+{
+ return (readl(regbase + INVALUE_REGS + EXT_REGOFF) >> offset) & 1;
+}
+
+static void vt8500_gpio_set_value(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ unsigned val = readl(regbase + OUTVALUE_REGS + EXT_REGOFF);
+
+ if (value)
+ val |= (1 << offset);
+ else
+ val &= ~(1 << offset);
+
+ writel(val, regbase + OUTVALUE_REGS + EXT_REGOFF);
+}
+
+static int vt8500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ if (offset > 7)
+ return -EINVAL;
+
+ return gpio_to_irq_map[offset];
+}
+
+static struct gpio_chip vt8500_external_gpios = {
+ .label = "extgpio",
+ .direction_input = vt8500_gpio_direction_input,
+ .direction_output = vt8500_gpio_direction_output,
+ .get = vt8500_gpio_get_value,
+ .set = vt8500_gpio_set_value,
+ .to_irq = vt8500_gpio_to_irq,
+ .can_sleep = 0,
+ .base = 0,
+ .ngpio = 8,
+};
+
+void __init vt8500_gpio_init(void)
+{
+ int i;
+
+ for (i = 0; i < 8; i++)
+ gpio_to_irq_map[i] = wmt_gpio_ext_irq[i];
+
+ regbase = ioremap(wmt_gpio_base, SZ_64K);
+ if (!regbase) {
+ printk(KERN_ERR "Failed to map MMIO registers for GPIO\n");
+ return;
+ }
+
+ gpiochip_add(&vt8500_external_gpios);
+
+ for (i = 0; i < ARRAY_SIZE(vt8500_muxed_gpios); i++)
+ gpiochip_add(&vt8500_muxed_gpios[i].chip);
+}
diff --git a/arch/arm/mach-vt8500/include/mach/debug-macro.S b/arch/arm/mach-vt8500/include/mach/debug-macro.S
new file mode 100644
index 00000000000..f1191626ad5
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/debug-macro.S
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/debug-macro.S
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * Debugging macro include header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+ .macro addruart, rp, rv
+ mov \rp, #0x00200000
+ orr \rv, \rp, #0xf8000000
+ orr \rp, \rp, #0xd8000000
+ .endm
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx, #0]
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #0x1c]
+ ands \rd, \rd, #0x2
+ bne 1001b
+ .endm
+
+ .macro waituart,rd,rx
+ .endm
diff --git a/arch/arm/mach-vt8500/include/mach/entry-macro.S b/arch/arm/mach-vt8500/include/mach/entry-macro.S
new file mode 100644
index 00000000000..92684c7eaed
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for VIA VT8500
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ @ physical 0xd8140000 is virtual 0xf8140000
+ mov \base, #0xf8000000
+ orr \base, \base, #0x00140000
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqnr, [\base]
+ cmp \irqnr, #63 @ may be false positive, check interrupt status
+ bne 1001f
+ ldr \irqstat, [\base, #0x84]
+ ands \irqstat, #0x80000000
+ moveq \irqnr, #0
+1001:
+ .endm
+
diff --git a/arch/arm/mach-vt8500/include/mach/gpio.h b/arch/arm/mach-vt8500/include/mach/gpio.h
new file mode 100644
index 00000000000..94ff27678a4
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/gpio.h
@@ -0,0 +1,6 @@
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
diff --git a/arch/arm/mach-vt8500/include/mach/hardware.h b/arch/arm/mach-vt8500/include/mach/hardware.h
new file mode 100644
index 00000000000..db4163f72c3
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/hardware.h
@@ -0,0 +1,12 @@
+/* arch/arm/mach-vt8500/include/mach/hardware.h
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
diff --git a/arch/arm/mach-vt8500/include/mach/i8042.h b/arch/arm/mach-vt8500/include/mach/i8042.h
new file mode 100644
index 00000000000..cd7143cad6f
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/i8042.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-vt8500/include/mach/i8042.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+extern unsigned long wmt_i8042_base __initdata;
+extern int wmt_i8042_kbd_irq;
+extern int wmt_i8042_aux_irq;
diff --git a/arch/arm/mach-vt8500/include/mach/io.h b/arch/arm/mach-vt8500/include/mach/io.h
new file mode 100644
index 00000000000..9077239f78c
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/io.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/io.h
+ *
+ * Copyright (C) 2010 Alexey Charkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffff
+
+#define __io(a) __typesafe_io((a) + 0xf0000000)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-vt8500/include/mach/irqs.h b/arch/arm/mach-vt8500/include/mach/irqs.h
new file mode 100644
index 00000000000..a129fd1222f
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/irqs.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/irqs.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* This value is just to make the core happy, never used otherwise */
+#define NR_IRQS 128
diff --git a/arch/arm/mach-vt8500/include/mach/memory.h b/arch/arm/mach-vt8500/include/mach/memory.h
new file mode 100644
index 00000000000..175f914eff9
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/memory.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/memory.h
+ *
+ * Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-vt8500/include/mach/system.h b/arch/arm/mach-vt8500/include/mach/system.h
new file mode 100644
index 00000000000..d6c757eaf26
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/system.h
@@ -0,0 +1,18 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/system.h
+ *
+ */
+#include <asm/io.h>
+
+/* PM Software Reset request register */
+#define VT8500_PMSR_VIRT 0xf8130060
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+ writel(1, VT8500_PMSR_VIRT);
+}
diff --git a/arch/arm/mach-vt8500/include/mach/timex.h b/arch/arm/mach-vt8500/include/mach/timex.h
new file mode 100644
index 00000000000..8487e4c690b
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/timex.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/timex.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef MACH_TIMEX_H
+#define MACH_TIMEX_H
+
+#define CLOCK_TICK_RATE (3000000)
+
+#endif /* MACH_TIMEX_H */
diff --git a/arch/arm/mach-vt8500/include/mach/uncompress.h b/arch/arm/mach-vt8500/include/mach/uncompress.h
new file mode 100644
index 00000000000..bb9e2d23fee
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/* arch/arm/mach-vt8500/include/mach/uncompress.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * Based on arch/arm/mach-dove/include/mach/uncompress.h
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define UART0_PHYS 0xd8200000
+#include <asm/io.h>
+
+static void putc(const char c)
+{
+ while (readb(UART0_PHYS + 0x1c) & 0x2)
+ /* Tx busy, wait and poll */;
+
+ writeb(c, UART0_PHYS);
+}
+
+static void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-vt8500/include/mach/vmalloc.h b/arch/arm/mach-vt8500/include/mach/vmalloc.h
new file mode 100644
index 00000000000..4642290ce41
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END 0xd0000000UL
diff --git a/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h b/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h
new file mode 100644
index 00000000000..ecfee912471
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/vt8500_irqs.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* VT8500 Interrupt Sources */
+
+#define IRQ_JPEGENC 0 /* JPEG Encoder */
+#define IRQ_JPEGDEC 1 /* JPEG Decoder */
+ /* Reserved */
+#define IRQ_PATA 3 /* PATA Controller */
+ /* Reserved */
+#define IRQ_DMA 5 /* DMA Controller */
+#define IRQ_EXT0 6 /* External Interrupt 0 */
+#define IRQ_EXT1 7 /* External Interrupt 1 */
+#define IRQ_GE 8 /* Graphic Engine */
+#define IRQ_GOV 9 /* Graphic Overlay Engine */
+#define IRQ_ETHER 10 /* Ethernet MAC */
+#define IRQ_MPEGTS 11 /* Transport Stream Interface */
+#define IRQ_LCDC 12 /* LCD Controller */
+#define IRQ_EXT2 13 /* External Interrupt 2 */
+#define IRQ_EXT3 14 /* External Interrupt 3 */
+#define IRQ_EXT4 15 /* External Interrupt 4 */
+#define IRQ_CIPHER 16 /* Cipher */
+#define IRQ_VPP 17 /* Video Post-Processor */
+#define IRQ_I2C1 18 /* I2C 1 */
+#define IRQ_I2C0 19 /* I2C 0 */
+#define IRQ_SDMMC 20 /* SD/MMC Controller */
+#define IRQ_SDMMC_DMA 21 /* SD/MMC Controller DMA */
+#define IRQ_PMC_WU 22 /* Power Management Controller Wakeup */
+ /* Reserved */
+#define IRQ_SPI0 24 /* SPI 0 */
+#define IRQ_SPI1 25 /* SPI 1 */
+#define IRQ_SPI2 26 /* SPI 2 */
+#define IRQ_LCDDF 27 /* LCD Data Formatter */
+#define IRQ_NAND 28 /* NAND Flash Controller */
+#define IRQ_NAND_DMA 29 /* NAND Flash Controller DMA */
+#define IRQ_MS 30 /* MemoryStick Controller */
+#define IRQ_MS_DMA 31 /* MemoryStick Controller DMA */
+#define IRQ_UART0 32 /* UART 0 */
+#define IRQ_UART1 33 /* UART 1 */
+#define IRQ_I2S 34 /* I2S */
+#define IRQ_PCM 35 /* PCM */
+#define IRQ_PMCOS0 36 /* PMC OS Timer 0 */
+#define IRQ_PMCOS1 37 /* PMC OS Timer 1 */
+#define IRQ_PMCOS2 38 /* PMC OS Timer 2 */
+#define IRQ_PMCOS3 39 /* PMC OS Timer 3 */
+#define IRQ_VPU 40 /* Video Processing Unit */
+#define IRQ_VID 41 /* Video Digital Input Interface */
+#define IRQ_AC97 42 /* AC97 Interface */
+#define IRQ_EHCI 43 /* USB */
+#define IRQ_NOR 44 /* NOR Flash Controller */
+#define IRQ_PS2MOUSE 45 /* PS/2 Mouse */
+#define IRQ_PS2KBD 46 /* PS/2 Keyboard */
+#define IRQ_UART2 47 /* UART 2 */
+#define IRQ_RTC 48 /* RTC Interrupt */
+#define IRQ_RTCSM 49 /* RTC Second/Minute Update Interrupt */
+#define IRQ_UART3 50 /* UART 3 */
+#define IRQ_ADC 51 /* ADC */
+#define IRQ_EXT5 52 /* External Interrupt 5 */
+#define IRQ_EXT6 53 /* External Interrupt 6 */
+#define IRQ_EXT7 54 /* External Interrupt 7 */
+#define IRQ_CIR 55 /* CIR */
+#define IRQ_DMA0 56 /* DMA Channel 0 */
+#define IRQ_DMA1 57 /* DMA Channel 1 */
+#define IRQ_DMA2 58 /* DMA Channel 2 */
+#define IRQ_DMA3 59 /* DMA Channel 3 */
+#define IRQ_DMA4 60 /* DMA Channel 4 */
+#define IRQ_DMA5 61 /* DMA Channel 5 */
+#define IRQ_DMA6 62 /* DMA Channel 6 */
+#define IRQ_DMA7 63 /* DMA Channel 7 */
+
+#define VT8500_NR_IRQS 64
diff --git a/arch/arm/mach-vt8500/include/mach/vt8500_regs.h b/arch/arm/mach-vt8500/include/mach/vt8500_regs.h
new file mode 100644
index 00000000000..29c63ecb238
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/vt8500_regs.h
@@ -0,0 +1,79 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/vt8500_regs.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_VT8500_REGS_H
+#define __ASM_ARM_ARCH_VT8500_REGS_H
+
+/* VT8500 Registers Map */
+
+#define VT8500_REGS_START_PHYS 0xd8000000 /* Start of MMIO registers */
+#define VT8500_REGS_START_VIRT 0xf8000000 /* Virtual mapping start */
+
+#define VT8500_DDR_BASE 0xd8000000 /* 1k DDR/DDR2 Memory
+ Controller */
+#define VT8500_DMA_BASE 0xd8001000 /* 1k DMA Controller */
+#define VT8500_SFLASH_BASE 0xd8002000 /* 1k Serial Flash Memory
+ Controller */
+#define VT8500_ETHER_BASE 0xd8004000 /* 1k Ethernet MAC 0 */
+#define VT8500_CIPHER_BASE 0xd8006000 /* 4k Cipher */
+#define VT8500_USB_BASE 0xd8007800 /* 2k USB OTG */
+# define VT8500_EHCI_BASE 0xd8007900 /* EHCI */
+# define VT8500_UHCI_BASE 0xd8007b01 /* UHCI */
+#define VT8500_PATA_BASE 0xd8008000 /* 512 PATA */
+#define VT8500_PS2_BASE 0xd8008800 /* 1k PS/2 */
+#define VT8500_NAND_BASE 0xd8009000 /* 1k NAND Controller */
+#define VT8500_NOR_BASE 0xd8009400 /* 1k NOR Controller */
+#define VT8500_SDMMC_BASE 0xd800a000 /* 1k SD/MMC Controller */
+#define VT8500_MS_BASE 0xd800b000 /* 1k MS/MSPRO Controller */
+#define VT8500_LCDC_BASE 0xd800e400 /* 1k LCD Controller */
+#define VT8500_VPU_BASE 0xd8050000 /* 256 VPU */
+#define VT8500_GOV_BASE 0xd8050300 /* 256 GOV */
+#define VT8500_GEGEA_BASE 0xd8050400 /* 768 GE/GE Alpha Mixing */
+#define VT8500_LCDF_BASE 0xd8050900 /* 256 LCD Formatter */
+#define VT8500_VID_BASE 0xd8050a00 /* 256 VID */
+#define VT8500_VPP_BASE 0xd8050b00 /* 256 VPP */
+#define VT8500_TSBK_BASE 0xd80f4000 /* 4k TSBK */
+#define VT8500_JPEGDEC_BASE 0xd80fe000 /* 4k JPEG Decoder */
+#define VT8500_JPEGENC_BASE 0xd80ff000 /* 4k JPEG Encoder */
+#define VT8500_RTC_BASE 0xd8100000 /* 64k RTC */
+#define VT8500_GPIO_BASE 0xd8110000 /* 64k GPIO Configuration */
+#define VT8500_SCC_BASE 0xd8120000 /* 64k System Configuration*/
+#define VT8500_PMC_BASE 0xd8130000 /* 64k PMC Configuration */
+#define VT8500_IC_BASE 0xd8140000 /* 64k Interrupt Controller*/
+#define VT8500_UART0_BASE 0xd8200000 /* 64k UART 0 */
+#define VT8500_UART2_BASE 0xd8210000 /* 64k UART 2 */
+#define VT8500_PWM_BASE 0xd8220000 /* 64k PWM Configuration */
+#define VT8500_SPI0_BASE 0xd8240000 /* 64k SPI 0 */
+#define VT8500_SPI1_BASE 0xd8250000 /* 64k SPI 1 */
+#define VT8500_CIR_BASE 0xd8270000 /* 64k CIR */
+#define VT8500_I2C0_BASE 0xd8280000 /* 64k I2C 0 */
+#define VT8500_AC97_BASE 0xd8290000 /* 64k AC97 */
+#define VT8500_SPI2_BASE 0xd82a0000 /* 64k SPI 2 */
+#define VT8500_UART1_BASE 0xd82b0000 /* 64k UART 1 */
+#define VT8500_UART3_BASE 0xd82c0000 /* 64k UART 3 */
+#define VT8500_PCM_BASE 0xd82d0000 /* 64k PCM */
+#define VT8500_I2C1_BASE 0xd8320000 /* 64k I2C 1 */
+#define VT8500_I2S_BASE 0xd8330000 /* 64k I2S */
+#define VT8500_ADC_BASE 0xd8340000 /* 64k ADC */
+
+#define VT8500_REGS_END_PHYS 0xd834ffff /* End of MMIO registers */
+#define VT8500_REGS_LENGTH (VT8500_REGS_END_PHYS \
+ - VT8500_REGS_START_PHYS + 1)
+
+#endif
diff --git a/arch/arm/mach-vt8500/include/mach/vt8500fb.h b/arch/arm/mach-vt8500/include/mach/vt8500fb.h
new file mode 100644
index 00000000000..7f399c370fe
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/vt8500fb.h
@@ -0,0 +1,31 @@
+/*
+ * VT8500/WM8505 Frame Buffer platform data definitions
+ *
+ * Copyright (C) 2010 Ed Spiridonov <edo.rus@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _VT8500FB_H
+#define _VT8500FB_H
+
+#include <linux/fb.h>
+
+struct vt8500fb_platform_data {
+ struct fb_videomode mode;
+ u32 xres_virtual;
+ u32 yres_virtual;
+ u32 bpp;
+ unsigned long video_mem_phys;
+ void *video_mem_virt;
+ unsigned long video_mem_len;
+};
+
+#endif /* _VT8500FB_H */
diff --git a/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h b/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h
new file mode 100644
index 00000000000..6128627ac75
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/wm8505_irqs.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* WM8505 Interrupt Sources */
+
+#define IRQ_UHCI 0 /* UHC FS (UHCI?) */
+#define IRQ_EHCI 1 /* UHC HS */
+#define IRQ_UDCDMA 2 /* UDC DMA */
+ /* Reserved */
+#define IRQ_PS2MOUSE 4 /* PS/2 Mouse */
+#define IRQ_UDC 5 /* UDC */
+#define IRQ_EXT0 6 /* External Interrupt 0 */
+#define IRQ_EXT1 7 /* External Interrupt 1 */
+#define IRQ_KEYPAD 8 /* Keypad */
+#define IRQ_DMA 9 /* DMA Controller */
+#define IRQ_ETHER 10 /* Ethernet MAC */
+ /* Reserved */
+ /* Reserved */
+#define IRQ_EXT2 13 /* External Interrupt 2 */
+#define IRQ_EXT3 14 /* External Interrupt 3 */
+#define IRQ_EXT4 15 /* External Interrupt 4 */
+#define IRQ_APB 16 /* APB Bridge */
+#define IRQ_DMA0 17 /* DMA Channel 0 */
+#define IRQ_I2C1 18 /* I2C 1 */
+#define IRQ_I2C0 19 /* I2C 0 */
+#define IRQ_SDMMC 20 /* SD/MMC Controller */
+#define IRQ_SDMMC_DMA 21 /* SD/MMC Controller DMA */
+#define IRQ_PMC_WU 22 /* Power Management Controller Wakeup */
+#define IRQ_PS2KBD 23 /* PS/2 Keyboard */
+#define IRQ_SPI0 24 /* SPI 0 */
+#define IRQ_SPI1 25 /* SPI 1 */
+#define IRQ_SPI2 26 /* SPI 2 */
+#define IRQ_DMA1 27 /* DMA Channel 1 */
+#define IRQ_NAND 28 /* NAND Flash Controller */
+#define IRQ_NAND_DMA 29 /* NAND Flash Controller DMA */
+#define IRQ_UART5 30 /* UART 5 */
+#define IRQ_UART4 31 /* UART 4 */
+#define IRQ_UART0 32 /* UART 0 */
+#define IRQ_UART1 33 /* UART 1 */
+#define IRQ_DMA2 34 /* DMA Channel 2 */
+#define IRQ_I2S 35 /* I2S */
+#define IRQ_PMCOS0 36 /* PMC OS Timer 0 */
+#define IRQ_PMCOS1 37 /* PMC OS Timer 1 */
+#define IRQ_PMCOS2 38 /* PMC OS Timer 2 */
+#define IRQ_PMCOS3 39 /* PMC OS Timer 3 */
+#define IRQ_DMA3 40 /* DMA Channel 3 */
+#define IRQ_DMA4 41 /* DMA Channel 4 */
+#define IRQ_AC97 42 /* AC97 Interface */
+ /* Reserved */
+#define IRQ_NOR 44 /* NOR Flash Controller */
+#define IRQ_DMA5 45 /* DMA Channel 5 */
+#define IRQ_DMA6 46 /* DMA Channel 6 */
+#define IRQ_UART2 47 /* UART 2 */
+#define IRQ_RTC 48 /* RTC Interrupt */
+#define IRQ_RTCSM 49 /* RTC Second/Minute Update Interrupt */
+#define IRQ_UART3 50 /* UART 3 */
+#define IRQ_DMA7 51 /* DMA Channel 7 */
+#define IRQ_EXT5 52 /* External Interrupt 5 */
+#define IRQ_EXT6 53 /* External Interrupt 6 */
+#define IRQ_EXT7 54 /* External Interrupt 7 */
+#define IRQ_CIR 55 /* CIR */
+#define IRQ_SIC0 56 /* SIC IRQ0 */
+#define IRQ_SIC1 57 /* SIC IRQ1 */
+#define IRQ_SIC2 58 /* SIC IRQ2 */
+#define IRQ_SIC3 59 /* SIC IRQ3 */
+#define IRQ_SIC4 60 /* SIC IRQ4 */
+#define IRQ_SIC5 61 /* SIC IRQ5 */
+#define IRQ_SIC6 62 /* SIC IRQ6 */
+#define IRQ_SIC7 63 /* SIC IRQ7 */
+ /* Reserved */
+#define IRQ_JPEGDEC 65 /* JPEG Decoder */
+#define IRQ_SAE 66 /* SAE (?) */
+ /* Reserved */
+#define IRQ_VPU 79 /* Video Processing Unit */
+#define IRQ_VPP 80 /* Video Post-Processor */
+#define IRQ_VID 81 /* Video Digital Input Interface */
+#define IRQ_SPU 82 /* SPU (?) */
+#define IRQ_PIP 83 /* PIP Error */
+#define IRQ_GE 84 /* Graphic Engine */
+#define IRQ_GOV 85 /* Graphic Overlay Engine */
+#define IRQ_DVO 86 /* Digital Video Output */
+ /* Reserved */
+#define IRQ_DMA8 92 /* DMA Channel 8 */
+#define IRQ_DMA9 93 /* DMA Channel 9 */
+#define IRQ_DMA10 94 /* DMA Channel 10 */
+#define IRQ_DMA11 95 /* DMA Channel 11 */
+#define IRQ_DMA12 96 /* DMA Channel 12 */
+#define IRQ_DMA13 97 /* DMA Channel 13 */
+#define IRQ_DMA14 98 /* DMA Channel 14 */
+#define IRQ_DMA15 99 /* DMA Channel 15 */
+ /* Reserved */
+#define IRQ_GOVW 111 /* GOVW (?) */
+#define IRQ_GOVRSDSCD 112 /* GOVR SDSCD (?) */
+#define IRQ_GOVRSDMIF 113 /* GOVR SDMIF (?) */
+#define IRQ_GOVRHDSCD 114 /* GOVR HDSCD (?) */
+#define IRQ_GOVRHDMIF 115 /* GOVR HDMIF (?) */
+
+#define WM8505_NR_IRQS 116
diff --git a/arch/arm/mach-vt8500/include/mach/wm8505_regs.h b/arch/arm/mach-vt8500/include/mach/wm8505_regs.h
new file mode 100644
index 00000000000..df1550941ef
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/wm8505_regs.h
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/wm8505_regs.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_WM8505_REGS_H
+#define __ASM_ARM_ARCH_WM8505_REGS_H
+
+/* WM8505 Registers Map */
+
+#define WM8505_REGS_START_PHYS 0xd8000000 /* Start of MMIO registers */
+#define WM8505_REGS_START_VIRT 0xf8000000 /* Virtual mapping start */
+
+#define WM8505_DDR_BASE 0xd8000400 /* 1k DDR/DDR2 Memory
+ Controller */
+#define WM8505_DMA_BASE 0xd8001800 /* 1k DMA Controller */
+#define WM8505_VDMA_BASE 0xd8001c00 /* 1k VDMA */
+#define WM8505_SFLASH_BASE 0xd8002000 /* 1k Serial Flash Memory
+ Controller */
+#define WM8505_ETHER_BASE 0xd8004000 /* 1k Ethernet MAC 0 */
+#define WM8505_CIPHER_BASE 0xd8006000 /* 4k Cipher */
+#define WM8505_USB_BASE 0xd8007000 /* 2k USB 2.0 Host */
+# define WM8505_EHCI_BASE 0xd8007100 /* EHCI */
+# define WM8505_UHCI_BASE 0xd8007301 /* UHCI */
+#define WM8505_PS2_BASE 0xd8008800 /* 1k PS/2 */
+#define WM8505_NAND_BASE 0xd8009000 /* 1k NAND Controller */
+#define WM8505_NOR_BASE 0xd8009400 /* 1k NOR Controller */
+#define WM8505_SDMMC_BASE 0xd800a000 /* 1k SD/MMC Controller */
+#define WM8505_VPU_BASE 0xd8050000 /* 256 VPU */
+#define WM8505_GOV_BASE 0xd8050300 /* 256 GOV */
+#define WM8505_GEGEA_BASE 0xd8050400 /* 768 GE/GE Alpha Mixing */
+#define WM8505_GOVR_BASE 0xd8050800 /* 512 GOVR (frambuffer) */
+#define WM8505_VID_BASE 0xd8050a00 /* 256 VID */
+#define WM8505_SCL_BASE 0xd8050d00 /* 256 SCL */
+#define WM8505_VPP_BASE 0xd8050f00 /* 256 VPP */
+#define WM8505_JPEGDEC_BASE 0xd80fe000 /* 4k JPEG Decoder */
+#define WM8505_RTC_BASE 0xd8100000 /* 64k RTC */
+#define WM8505_GPIO_BASE 0xd8110000 /* 64k GPIO Configuration */
+#define WM8505_SCC_BASE 0xd8120000 /* 64k System Configuration*/
+#define WM8505_PMC_BASE 0xd8130000 /* 64k PMC Configuration */
+#define WM8505_IC_BASE 0xd8140000 /* 64k Interrupt Controller*/
+#define WM8505_SIC_BASE 0xd8150000 /* 64k Secondary IC */
+#define WM8505_UART0_BASE 0xd8200000 /* 64k UART 0 */
+#define WM8505_UART2_BASE 0xd8210000 /* 64k UART 2 */
+#define WM8505_PWM_BASE 0xd8220000 /* 64k PWM Configuration */
+#define WM8505_SPI0_BASE 0xd8240000 /* 64k SPI 0 */
+#define WM8505_SPI1_BASE 0xd8250000 /* 64k SPI 1 */
+#define WM8505_KEYPAD_BASE 0xd8260000 /* 64k Keypad control */
+#define WM8505_CIR_BASE 0xd8270000 /* 64k CIR */
+#define WM8505_I2C0_BASE 0xd8280000 /* 64k I2C 0 */
+#define WM8505_AC97_BASE 0xd8290000 /* 64k AC97 */
+#define WM8505_SPI2_BASE 0xd82a0000 /* 64k SPI 2 */
+#define WM8505_UART1_BASE 0xd82b0000 /* 64k UART 1 */
+#define WM8505_UART3_BASE 0xd82c0000 /* 64k UART 3 */
+#define WM8505_I2C1_BASE 0xd8320000 /* 64k I2C 1 */
+#define WM8505_I2S_BASE 0xd8330000 /* 64k I2S */
+#define WM8505_UART4_BASE 0xd8370000 /* 64k UART 4 */
+#define WM8505_UART5_BASE 0xd8380000 /* 64k UART 5 */
+
+#define WM8505_REGS_END_PHYS 0xd838ffff /* End of MMIO registers */
+#define WM8505_REGS_LENGTH (WM8505_REGS_END_PHYS \
+ - WM8505_REGS_START_PHYS + 1)
+
+#endif
diff --git a/arch/arm/mach-vt8500/irq.c b/arch/arm/mach-vt8500/irq.c
new file mode 100644
index 00000000000..5f4ddde4f02
--- /dev/null
+++ b/arch/arm/mach-vt8500/irq.c
@@ -0,0 +1,177 @@
+/*
+ * arch/arm/mach-vt8500/irq.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/irq.h>
+
+#include "devices.h"
+
+#define VT8500_IC_DCTR 0x40 /* Destination control
+ register, 64*u8 */
+#define VT8500_INT_ENABLE (1 << 3)
+#define VT8500_TRIGGER_HIGH (0 << 4)
+#define VT8500_TRIGGER_RISING (1 << 4)
+#define VT8500_TRIGGER_FALLING (2 << 4)
+#define VT8500_EDGE ( VT8500_TRIGGER_RISING \
+ | VT8500_TRIGGER_FALLING)
+#define VT8500_IC_STATUS 0x80 /* Interrupt status, 2*u32 */
+
+static void __iomem *ic_regbase;
+static void __iomem *sic_regbase;
+
+static void vt8500_irq_mask(unsigned int irq)
+{
+ void __iomem *base = ic_regbase;
+ u8 edge;
+
+ if (irq >= 64) {
+ base = sic_regbase;
+ irq -= 64;
+ }
+ edge = readb(base + VT8500_IC_DCTR + irq) & VT8500_EDGE;
+ if (edge) {
+ void __iomem *stat_reg = base + VT8500_IC_STATUS
+ + (irq < 32 ? 0 : 4);
+ unsigned status = readl(stat_reg);
+
+ status |= (1 << (irq & 0x1f));
+ writel(status, stat_reg);
+ } else {
+ u8 dctr = readb(base + VT8500_IC_DCTR + irq);
+
+ dctr &= ~VT8500_INT_ENABLE;
+ writeb(dctr, base + VT8500_IC_DCTR + irq);
+ }
+}
+
+static void vt8500_irq_unmask(unsigned int irq)
+{
+ void __iomem *base = ic_regbase;
+ u8 dctr;
+
+ if (irq >= 64) {
+ base = sic_regbase;
+ irq -= 64;
+ }
+ dctr = readb(base + VT8500_IC_DCTR + irq);
+ dctr |= VT8500_INT_ENABLE;
+ writeb(dctr, base + VT8500_IC_DCTR + irq);
+}
+
+static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+ void __iomem *base = ic_regbase;
+ unsigned int orig_irq = irq;
+ u8 dctr;
+
+ if (irq >= 64) {
+ base = sic_regbase;
+ irq -= 64;
+ }
+
+ dctr = readb(base + VT8500_IC_DCTR + irq);
+ dctr &= ~VT8500_EDGE;
+
+ switch (flow_type) {
+ case IRQF_TRIGGER_LOW:
+ return -EINVAL;
+ case IRQF_TRIGGER_HIGH:
+ dctr |= VT8500_TRIGGER_HIGH;
+ irq_desc[orig_irq].handle_irq = handle_level_irq;
+ break;
+ case IRQF_TRIGGER_FALLING:
+ dctr |= VT8500_TRIGGER_FALLING;
+ irq_desc[orig_irq].handle_irq = handle_edge_irq;
+ break;
+ case IRQF_TRIGGER_RISING:
+ dctr |= VT8500_TRIGGER_RISING;
+ irq_desc[orig_irq].handle_irq = handle_edge_irq;
+ break;
+ }
+ writeb(dctr, base + VT8500_IC_DCTR + irq);
+
+ return 0;
+}
+
+static struct irq_chip vt8500_irq_chip = {
+ .name = "vt8500",
+ .ack = vt8500_irq_mask,
+ .mask = vt8500_irq_mask,
+ .unmask = vt8500_irq_unmask,
+ .set_type = vt8500_irq_set_type,
+};
+
+void __init vt8500_init_irq(void)
+{
+ unsigned int i;
+
+ ic_regbase = ioremap(wmt_ic_base, SZ_64K);
+
+ if (ic_regbase) {
+ /* Enable rotating priority for IRQ */
+ writel((1 << 6), ic_regbase + 0x20);
+ writel(0, ic_regbase + 0x24);
+
+ for (i = 0; i < wmt_nr_irqs; i++) {
+ /* Disable all interrupts and route them to IRQ */
+ writeb(0x00, ic_regbase + VT8500_IC_DCTR + i);
+
+ set_irq_chip(i, &vt8500_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+ } else {
+ printk(KERN_ERR "Unable to remap the Interrupt Controller registers, not enabling IRQs!\n");
+ }
+}
+
+void __init wm8505_init_irq(void)
+{
+ unsigned int i;
+
+ ic_regbase = ioremap(wmt_ic_base, SZ_64K);
+ sic_regbase = ioremap(wmt_sic_base, SZ_64K);
+
+ if (ic_regbase && sic_regbase) {
+ /* Enable rotating priority for IRQ */
+ writel((1 << 6), ic_regbase + 0x20);
+ writel(0, ic_regbase + 0x24);
+ writel((1 << 6), sic_regbase + 0x20);
+ writel(0, sic_regbase + 0x24);
+
+ for (i = 0; i < wmt_nr_irqs; i++) {
+ /* Disable all interrupts and route them to IRQ */
+ if (i < 64)
+ writeb(0x00, ic_regbase + VT8500_IC_DCTR + i);
+ else
+ writeb(0x00, sic_regbase + VT8500_IC_DCTR
+ + i - 64);
+
+ set_irq_chip(i, &vt8500_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+ } else {
+ printk(KERN_ERR "Unable to remap the Interrupt Controller registers, not enabling IRQs!\n");
+ }
+}
diff --git a/arch/arm/mach-vt8500/pwm.c b/arch/arm/mach-vt8500/pwm.c
new file mode 100644
index 00000000000..8ad825e9359
--- /dev/null
+++ b/arch/arm/mach-vt8500/pwm.c
@@ -0,0 +1,265 @@
+/*
+ * arch/arm/mach-vt8500/pwm.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+#include <linux/delay.h>
+
+#include <asm/div64.h>
+
+#define VT8500_NR_PWMS 4
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device {
+ struct list_head node;
+ struct platform_device *pdev;
+
+ const char *label;
+
+ void __iomem *regbase;
+
+ unsigned int use_count;
+ unsigned int pwm_id;
+};
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+static inline void pwm_busy_wait(void __iomem *reg, u8 bitmask)
+{
+ int loops = msecs_to_loops(10);
+ while ((readb(reg) & bitmask) && --loops)
+ cpu_relax();
+
+ if (unlikely(!loops))
+ pr_warning("Waiting for status bits 0x%x to clear timed out\n",
+ bitmask);
+}
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+ unsigned long long c;
+ unsigned long period_cycles, prescale, pv, dc;
+
+ if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
+ return -EINVAL;
+
+ c = 25000000/2; /* wild guess --- need to implement clocks */
+ c = c * period_ns;
+ do_div(c, 1000000000);
+ period_cycles = c;
+
+ if (period_cycles < 1)
+ period_cycles = 1;
+ prescale = (period_cycles - 1) / 4096;
+ pv = period_cycles / (prescale + 1) - 1;
+ if (pv > 4095)
+ pv = 4095;
+
+ if (prescale > 1023)
+ return -EINVAL;
+
+ c = (unsigned long long)pv * duty_ns;
+ do_div(c, period_ns);
+ dc = c;
+
+ pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 1));
+ writel(prescale, pwm->regbase + 0x4 + (pwm->pwm_id << 4));
+
+ pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 2));
+ writel(pv, pwm->regbase + 0x8 + (pwm->pwm_id << 4));
+
+ pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 3));
+ writel(dc, pwm->regbase + 0xc + (pwm->pwm_id << 4));
+
+ return 0;
+}
+EXPORT_SYMBOL(pwm_config);
+
+int pwm_enable(struct pwm_device *pwm)
+{
+ pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 0));
+ writel(5, pwm->regbase + (pwm->pwm_id << 4));
+ return 0;
+}
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+ pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 0));
+ writel(0, pwm->regbase + (pwm->pwm_id << 4));
+}
+EXPORT_SYMBOL(pwm_disable);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+ struct pwm_device *pwm;
+ int found = 0;
+
+ mutex_lock(&pwm_lock);
+
+ list_for_each_entry(pwm, &pwm_list, node) {
+ if (pwm->pwm_id == pwm_id) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (found) {
+ if (pwm->use_count == 0) {
+ pwm->use_count++;
+ pwm->label = label;
+ } else {
+ pwm = ERR_PTR(-EBUSY);
+ }
+ } else {
+ pwm = ERR_PTR(-ENOENT);
+ }
+
+ mutex_unlock(&pwm_lock);
+ return pwm;
+}
+EXPORT_SYMBOL(pwm_request);
+
+void pwm_free(struct pwm_device *pwm)
+{
+ mutex_lock(&pwm_lock);
+
+ if (pwm->use_count) {
+ pwm->use_count--;
+ pwm->label = NULL;
+ } else {
+ pr_warning("PWM device already freed\n");
+ }
+
+ mutex_unlock(&pwm_lock);
+}
+EXPORT_SYMBOL(pwm_free);
+
+static inline void __add_pwm(struct pwm_device *pwm)
+{
+ mutex_lock(&pwm_lock);
+ list_add_tail(&pwm->node, &pwm_list);
+ mutex_unlock(&pwm_lock);
+}
+
+static int __devinit pwm_probe(struct platform_device *pdev)
+{
+ struct pwm_device *pwms;
+ struct resource *r;
+ int ret = 0;
+ int i;
+
+ pwms = kzalloc(sizeof(struct pwm_device) * VT8500_NR_PWMS, GFP_KERNEL);
+ if (pwms == NULL) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < VT8500_NR_PWMS; i++) {
+ pwms[i].use_count = 0;
+ pwms[i].pwm_id = i;
+ pwms[i].pdev = pdev;
+ }
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "no memory resource defined\n");
+ ret = -ENODEV;
+ goto err_free;
+ }
+
+ r = request_mem_region(r->start, resource_size(r), pdev->name);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "failed to request memory resource\n");
+ ret = -EBUSY;
+ goto err_free;
+ }
+
+ pwms[0].regbase = ioremap(r->start, resource_size(r));
+ if (pwms[0].regbase == NULL) {
+ dev_err(&pdev->dev, "failed to ioremap() registers\n");
+ ret = -ENODEV;
+ goto err_free_mem;
+ }
+
+ for (i = 1; i < VT8500_NR_PWMS; i++)
+ pwms[i].regbase = pwms[0].regbase;
+
+ for (i = 0; i < VT8500_NR_PWMS; i++)
+ __add_pwm(&pwms[i]);
+
+ platform_set_drvdata(pdev, pwms);
+ return 0;
+
+err_free_mem:
+ release_mem_region(r->start, resource_size(r));
+err_free:
+ kfree(pwms);
+ return ret;
+}
+
+static int __devexit pwm_remove(struct platform_device *pdev)
+{
+ struct pwm_device *pwms;
+ struct resource *r;
+ int i;
+
+ pwms = platform_get_drvdata(pdev);
+ if (pwms == NULL)
+ return -ENODEV;
+
+ mutex_lock(&pwm_lock);
+
+ for (i = 0; i < VT8500_NR_PWMS; i++)
+ list_del(&pwms[i].node);
+ mutex_unlock(&pwm_lock);
+
+ iounmap(pwms[0].regbase);
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(r->start, resource_size(r));
+
+ kfree(pwms);
+ return 0;
+}
+
+static struct platform_driver pwm_driver = {
+ .driver = {
+ .name = "vt8500-pwm",
+ .owner = THIS_MODULE,
+ },
+ .probe = pwm_probe,
+ .remove = __devexit_p(pwm_remove),
+};
+
+static int __init pwm_init(void)
+{
+ return platform_driver_register(&pwm_driver);
+}
+arch_initcall(pwm_init);
+
+static void __exit pwm_exit(void)
+{
+ platform_driver_unregister(&pwm_driver);
+}
+module_exit(pwm_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-vt8500/timer.c b/arch/arm/mach-vt8500/timer.c
new file mode 100644
index 00000000000..d5376c592ab
--- /dev/null
+++ b/arch/arm/mach-vt8500/timer.c
@@ -0,0 +1,155 @@
+/*
+ * arch/arm/mach-vt8500/timer.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/delay.h>
+
+#include <asm/mach/time.h>
+
+#include "devices.h"
+
+#define VT8500_TIMER_OFFSET 0x0100
+#define TIMER_MATCH_VAL 0x0000
+#define TIMER_COUNT_VAL 0x0010
+#define TIMER_STATUS_VAL 0x0014
+#define TIMER_IER_VAL 0x001c /* interrupt enable */
+#define TIMER_CTRL_VAL 0x0020
+#define TIMER_AS_VAL 0x0024 /* access status */
+#define TIMER_COUNT_R_ACTIVE (1 << 5) /* not ready for read */
+#define TIMER_COUNT_W_ACTIVE (1 << 4) /* not ready for write */
+#define TIMER_MATCH_W_ACTIVE (1 << 0) /* not ready for write */
+#define VT8500_TIMER_HZ 3000000
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+
+static void __iomem *regbase;
+
+static cycle_t vt8500_timer_read(struct clocksource *cs)
+{
+ int loops = msecs_to_loops(10);
+ writel(3, regbase + TIMER_CTRL_VAL);
+ while ((readl((regbase + TIMER_AS_VAL)) & TIMER_COUNT_R_ACTIVE)
+ && --loops)
+ cpu_relax();
+ return readl(regbase + TIMER_COUNT_VAL);
+}
+
+struct clocksource clocksource = {
+ .name = "vt8500_timer",
+ .rating = 200,
+ .read = vt8500_timer_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int vt8500_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ int loops = msecs_to_loops(10);
+ cycle_t alarm = clocksource.read(&clocksource) + cycles;
+ while ((readl(regbase + TIMER_AS_VAL) & TIMER_MATCH_W_ACTIVE)
+ && --loops)
+ cpu_relax();
+ writel((unsigned long)alarm, regbase + TIMER_MATCH_VAL);
+
+ if ((signed)(alarm - clocksource.read(&clocksource)) <= 16)
+ return -ETIME;
+
+ writel(1, regbase + TIMER_IER_VAL);
+
+ return 0;
+}
+
+static void vt8500_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_PERIODIC:
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ writel(readl(regbase + TIMER_CTRL_VAL) | 1,
+ regbase + TIMER_CTRL_VAL);
+ writel(0, regbase + TIMER_IER_VAL);
+ break;
+ }
+}
+
+struct clock_event_device clockevent = {
+ .name = "vt8500_timer",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 200,
+ .set_next_event = vt8500_timer_set_next_event,
+ .set_mode = vt8500_timer_set_mode,
+};
+
+static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+ writel(0xf, regbase + TIMER_STATUS_VAL);
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+struct irqaction irq = {
+ .name = "vt8500_timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = vt8500_timer_interrupt,
+ .dev_id = &clockevent,
+};
+
+static void __init vt8500_timer_init(void)
+{
+ regbase = ioremap(wmt_pmc_base + VT8500_TIMER_OFFSET, 0x28);
+ if (!regbase)
+ printk(KERN_ERR "vt8500_timer_init: failed to map MMIO registers\n");
+
+ writel(1, regbase + TIMER_CTRL_VAL);
+ writel(0xf, regbase + TIMER_STATUS_VAL);
+ writel(~0, regbase + TIMER_MATCH_VAL);
+
+ if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ))
+ printk(KERN_ERR "vt8500_timer_init: clocksource_register failed for %s\n",
+ clocksource.name);
+
+ clockevents_calc_mult_shift(&clockevent, VT8500_TIMER_HZ, 4);
+
+ /* copy-pasted from mach-msm; no idea */
+ clockevent.max_delta_ns =
+ clockevent_delta2ns(0xf0000000, &clockevent);
+ clockevent.min_delta_ns = clockevent_delta2ns(4, &clockevent);
+ clockevent.cpumask = cpumask_of(0);
+
+ if (setup_irq(wmt_timer_irq, &irq))
+ printk(KERN_ERR "vt8500_timer_init: setup_irq failed for %s\n",
+ clockevent.name);
+ clockevents_register_device(&clockevent);
+}
+
+struct sys_timer vt8500_timer = {
+ .init = vt8500_timer_init
+};
diff --git a/arch/arm/mach-vt8500/wm8505_7in.c b/arch/arm/mach-vt8500/wm8505_7in.c
new file mode 100644
index 00000000000..e73aadbcafd
--- /dev/null
+++ b/arch/arm/mach-vt8500/wm8505_7in.c
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/mach-vt8500/wm8505_7in.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/io.h>
+#include <linux/pm.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "devices.h"
+
+static void __iomem *pmc_hiber;
+
+static struct platform_device *devices[] __initdata = {
+ &vt8500_device_uart0,
+ &vt8500_device_ehci,
+ &vt8500_device_wm8505_fb,
+ &vt8500_device_ge_rops,
+ &vt8500_device_pwm,
+ &vt8500_device_pwmbl,
+ &vt8500_device_rtc,
+};
+
+static void vt8500_power_off(void)
+{
+ local_irq_disable();
+ writew(5, pmc_hiber);
+ asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0));
+}
+
+void __init wm8505_7in_init(void)
+{
+#ifdef CONFIG_FB_WM8505
+ void __iomem *gpio_mux_reg = ioremap(wmt_gpio_base + 0x200, 4);
+ if (gpio_mux_reg) {
+ writel(readl(gpio_mux_reg) | 0x80000000, gpio_mux_reg);
+ iounmap(gpio_mux_reg);
+ } else {
+ printk(KERN_ERR "Could not remap the GPIO mux register, display may not work properly!\n");
+ }
+#endif
+ pmc_hiber = ioremap(wmt_pmc_base + 0x12, 2);
+ if (pmc_hiber)
+ pm_power_off = &vt8500_power_off;
+ else
+ printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n");
+
+ wm8505_set_resources();
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ vt8500_gpio_init();
+}
+
+MACHINE_START(WM8505_7IN_NETBOOK, "WM8505 7-inch generic netbook")
+ .boot_params = 0x00000100,
+ .reserve = wm8505_reserve_mem,
+ .map_io = wm8505_map_io,
+ .init_irq = wm8505_init_irq,
+ .timer = &vt8500_timer,
+ .init_machine = wm8505_7in_init,
+MACHINE_END
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 9d30c6f804b..89266382b53 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -390,7 +390,7 @@ config CPU_PJ4
# ARMv6
config CPU_V6
- bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE
+ bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
select CPU_32v6
select CPU_ABRT_EV6
select CPU_PABRT_V6
@@ -402,21 +402,23 @@ config CPU_V6
select CPU_TLB_V6 if MMU
# ARMv6k
-config CPU_32v6K
- bool "Support ARM V6K processor extensions" if !SMP
- depends on CPU_V6 || CPU_V7
- default y if SMP && !(ARCH_MX3 || ARCH_OMAP2)
- help
- Say Y here if your ARMv6 processor supports the 'K' extension.
- This enables the kernel to use some instructions not present
- on previous processors, and as such a kernel build with this
- enabled will not boot on processors with do not support these
- instructions.
+config CPU_V6K
+ bool "Support ARM V6K processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
+ select CPU_32v6
+ select CPU_32v6K
+ select CPU_ABRT_EV6
+ select CPU_PABRT_V6
+ select CPU_CACHE_V6
+ select CPU_CACHE_VIPT
+ select CPU_CP15_MMU
+ select CPU_HAS_ASID if MMU
+ select CPU_COPY_V6 if MMU
+ select CPU_TLB_V6 if MMU
# ARMv7
config CPU_V7
bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
- select CPU_32v6K if !ARCH_OMAP2
+ select CPU_32v6K
select CPU_32v7
select CPU_ABRT_EV7
select CPU_PABRT_V7
@@ -433,25 +435,33 @@ config CPU_32v3
bool
select TLS_REG_EMUL if SMP || !MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+ select CPU_USE_DOMAINS if MMU
config CPU_32v4
bool
select TLS_REG_EMUL if SMP || !MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+ select CPU_USE_DOMAINS if MMU
config CPU_32v4T
bool
select TLS_REG_EMUL if SMP || !MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+ select CPU_USE_DOMAINS if MMU
config CPU_32v5
bool
select TLS_REG_EMUL if SMP || !MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+ select CPU_USE_DOMAINS if MMU
config CPU_32v6
bool
select TLS_REG_EMUL if !CPU_32v6K && !MMU
+ select CPU_USE_DOMAINS if CPU_V6 && MMU
+
+config CPU_32v6K
+ bool
config CPU_32v7
bool
@@ -607,8 +617,6 @@ config CPU_CP15_MPU
config CPU_USE_DOMAINS
bool
- depends on MMU
- default y if !CPU_32v6K
help
This option enables or disables the use of domain switching
via the set_fs() function.
@@ -623,7 +631,7 @@ comment "Processor Features"
config ARM_THUMB
bool "Support Thumb user binaries"
- depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V7 || CPU_FEROCEON
+ depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V6K || CPU_V7 || CPU_FEROCEON
default y
help
Say Y if you want to include kernel support for running user space
@@ -644,7 +652,7 @@ config ARM_THUMBEE
config SWP_EMULATE
bool "Emulate SWP/SWPB instructions"
- depends on CPU_V7 && !CPU_V6
+ depends on !CPU_USE_DOMAINS && CPU_V7
select HAVE_PROC_CPU if PROC_FS
default y if SMP
help
@@ -681,7 +689,7 @@ config CPU_BIG_ENDIAN
config CPU_ENDIAN_BE8
bool
depends on CPU_BIG_ENDIAN
- default CPU_V6 || CPU_V7
+ default CPU_V6 || CPU_V6K || CPU_V7
help
Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors.
@@ -747,7 +755,7 @@ config CPU_CACHE_ROUND_ROBIN
config CPU_BPREDICT_DISABLE
bool "Disable branch prediction"
- depends on CPU_ARM1020 || CPU_V6 || CPU_MOHAWK || CPU_XSC3 || CPU_V7 || CPU_FA526
+ depends on CPU_ARM1020 || CPU_V6 || CPU_V6K || CPU_MOHAWK || CPU_XSC3 || CPU_V7 || CPU_FA526
help
Say Y here to disable branch prediction. If unsure, say N.
@@ -767,7 +775,7 @@ config NEEDS_SYSCALL_FOR_CMPXCHG
config DMA_CACHE_RWFO
bool "Enable read/write for ownership DMA cache maintenance"
- depends on CPU_V6 && SMP
+ depends on CPU_V6K && SMP
default y
help
The Snoop Control Unit on ARM11MPCore does not detect the
@@ -823,7 +831,7 @@ config CACHE_L2X0
config CACHE_PL310
bool
depends on CACHE_L2X0
- default y if CPU_V7 && !CPU_V6
+ default y if CPU_V7 && !(CPU_V6 || CPU_V6K)
help
This option enables optimisations for the PL310 cache
controller.
@@ -845,16 +853,21 @@ config CACHE_XSC3L2
help
This option enables the L2 cache on XScale3.
+config ARM_L1_CACHE_SHIFT_6
+ bool
+ help
+ Setting ARM L1 cache line size to 64 Bytes.
+
config ARM_L1_CACHE_SHIFT
int
default 6 if ARM_L1_CACHE_SHIFT_6
default 5
config ARM_DMA_MEM_BUFFERABLE
- bool "Use non-cacheable memory for DMA" if CPU_V6 && !CPU_V7
+ bool "Use non-cacheable memory for DMA" if (CPU_V6 || CPU_V6K) && !CPU_V7
depends on !(MACH_REALVIEW_PB1176 || REALVIEW_EB_ARM11MP || \
MACH_REALVIEW_PB11MP)
- default y if CPU_V6 || CPU_V7
+ default y if CPU_V6 || CPU_V6K || CPU_V7
help
Historically, the kernel has used strongly ordered mappings to
provide DMA coherent memory. With the advent of ARMv7, mapping
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 00d74a04af3..bca7e61928c 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -90,6 +90,7 @@ obj-$(CONFIG_CPU_XSC3) += proc-xsc3.o
obj-$(CONFIG_CPU_MOHAWK) += proc-mohawk.o
obj-$(CONFIG_CPU_FEROCEON) += proc-feroceon.o
obj-$(CONFIG_CPU_V6) += proc-v6.o
+obj-$(CONFIG_CPU_V6K) += proc-v6.o
obj-$(CONFIG_CPU_V7) += proc-v7.o
AFLAGS_proc-v6.o :=-Wa,-march=armv6
diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S
index f332df7f0d3..1478aa52214 100644
--- a/arch/arm/mm/abort-ev6.S
+++ b/arch/arm/mm/abort-ev6.S
@@ -20,11 +20,11 @@
*/
.align 5
ENTRY(v6_early_abort)
-#ifdef CONFIG_CPU_32v6K
- clrex
-#else
+#ifdef CONFIG_CPU_V6
sub r1, sp, #4 @ Get unused stack location
strex r0, r1, [r1] @ Clear the exclusive monitor
+#elif defined(CONFIG_CPU_32v6K)
+ clrex
#endif
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 170c9bb9586..ef59099a546 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -49,7 +49,13 @@ static inline void cache_wait(void __iomem *reg, unsigned long mask)
static inline void cache_sync(void)
{
void __iomem *base = l2x0_base;
+
+#ifdef CONFIG_ARM_ERRATA_753970
+ /* write to an unmmapped register */
+ writel_relaxed(0, base + L2X0_DUMMY_REG);
+#else
writel_relaxed(0, base + L2X0_CACHE_SYNC);
+#endif
cache_wait(base + L2X0_CACHE_SYNC, 1);
}
@@ -67,18 +73,24 @@ static inline void l2x0_inv_line(unsigned long addr)
writel_relaxed(addr, base + L2X0_INV_LINE_PA);
}
-#ifdef CONFIG_PL310_ERRATA_588369
-static void debug_writel(unsigned long val)
-{
- extern void omap_smc1(u32 fn, u32 arg);
+#if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915)
- /*
- * Texas Instrument secure monitor api to modify the
- * PL310 Debug Control Register.
- */
- omap_smc1(0x100, val);
+#define debug_writel(val) outer_cache.set_debug(val)
+
+static void l2x0_set_debug(unsigned long val)
+{
+ writel_relaxed(val, l2x0_base + L2X0_DEBUG_CTRL);
+}
+#else
+/* Optimised out for non-errata case */
+static inline void debug_writel(unsigned long val)
+{
}
+#define l2x0_set_debug NULL
+#endif
+
+#ifdef CONFIG_PL310_ERRATA_588369
static inline void l2x0_flush_line(unsigned long addr)
{
void __iomem *base = l2x0_base;
@@ -91,11 +103,6 @@ static inline void l2x0_flush_line(unsigned long addr)
}
#else
-/* Optimised out for non-errata case */
-static inline void debug_writel(unsigned long val)
-{
-}
-
static inline void l2x0_flush_line(unsigned long addr)
{
void __iomem *base = l2x0_base;
@@ -119,9 +126,11 @@ static void l2x0_flush_all(void)
/* clean all ways */
spin_lock_irqsave(&l2x0_lock, flags);
+ debug_writel(0x03);
writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY);
cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask);
cache_sync();
+ debug_writel(0x00);
spin_unlock_irqrestore(&l2x0_lock, flags);
}
@@ -329,6 +338,7 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
outer_cache.flush_all = l2x0_flush_all;
outer_cache.inv_all = l2x0_inv_all;
outer_cache.disable = l2x0_disable;
+ outer_cache.set_debug = l2x0_set_debug;
printk(KERN_INFO "%s cache controller enabled\n", type);
printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n",
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index b0a98305055..afe209e1e1f 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -31,7 +31,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
unsigned long start_addr;
-#ifdef CONFIG_CPU_V6
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
unsigned int cache_type;
int do_align = 0, aliasing = 0;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 3c67e92f7d5..ff7b43b5885 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -827,16 +827,6 @@ static void __init sanity_check_meminfo(void)
* rather difficult.
*/
reason = "with VIPT aliasing cache";
- } else if (is_smp() && tlb_ops_need_broadcast()) {
- /*
- * kmap_high needs to occasionally flush TLB entries,
- * however, if the TLB entries need to be broadcast
- * we may deadlock:
- * kmap_high(irqs off)->flush_all_zero_pkmaps->
- * flush_tlb_kernel_range->smp_call_function_many
- * (must not be called with irqs off)
- */
- reason = "without hardware TLB ops broadcasting";
}
if (reason) {
printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n",
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index bcf748d9f4e..226e3d8351c 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -493,6 +493,9 @@ arm1020_processor_functions:
.word cpu_arm1020_dcache_clean_area
.word cpu_arm1020_switch_mm
.word cpu_arm1020_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm1020_processor_functions, . - arm1020_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index ab7ec26657e..86d9c2cf0bc 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -474,6 +474,9 @@ arm1020e_processor_functions:
.word cpu_arm1020e_dcache_clean_area
.word cpu_arm1020e_switch_mm
.word cpu_arm1020e_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm1020e_processor_functions, . - arm1020e_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 831c5e54e22..83d3dd34f84 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -457,6 +457,9 @@ arm1022_processor_functions:
.word cpu_arm1022_dcache_clean_area
.word cpu_arm1022_switch_mm
.word cpu_arm1022_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm1022_processor_functions, . - arm1022_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index e3f7e9a166b..686043ee728 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -452,6 +452,9 @@ arm1026_processor_functions:
.word cpu_arm1026_dcache_clean_area
.word cpu_arm1026_switch_mm
.word cpu_arm1026_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm1026_processor_functions, . - arm1026_processor_functions
.section .rodata
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 6a7be1863ed..5f79dc4ce3f 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -284,6 +284,9 @@ ENTRY(arm6_processor_functions)
.word cpu_arm6_dcache_clean_area
.word cpu_arm6_switch_mm
.word cpu_arm6_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm6_processor_functions, . - arm6_processor_functions
/*
@@ -301,6 +304,9 @@ ENTRY(arm7_processor_functions)
.word cpu_arm7_dcache_clean_area
.word cpu_arm7_switch_mm
.word cpu_arm7_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm7_processor_functions, . - arm7_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index c285395f44b..665266da143 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -185,6 +185,9 @@ ENTRY(arm720_processor_functions)
.word cpu_arm720_dcache_clean_area
.word cpu_arm720_switch_mm
.word cpu_arm720_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm720_processor_functions, . - arm720_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S
index 38b27dcba72..6f9d12effee 100644
--- a/arch/arm/mm/proc-arm740.S
+++ b/arch/arm/mm/proc-arm740.S
@@ -130,6 +130,9 @@ ENTRY(arm740_processor_functions)
.word cpu_arm740_dcache_clean_area
.word cpu_arm740_switch_mm
.word 0 @ cpu_*_set_pte
+ .word 0
+ .word 0
+ .word 0
.size arm740_processor_functions, . - arm740_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
index 0c9786de20a..e4c165ca669 100644
--- a/arch/arm/mm/proc-arm7tdmi.S
+++ b/arch/arm/mm/proc-arm7tdmi.S
@@ -70,6 +70,9 @@ ENTRY(arm7tdmi_processor_functions)
.word cpu_arm7tdmi_dcache_clean_area
.word cpu_arm7tdmi_switch_mm
.word 0 @ cpu_*_set_pte
+ .word 0
+ .word 0
+ .word 0
.size arm7tdmi_processor_functions, . - arm7tdmi_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 6109f278a90..219980ec8b6 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -387,6 +387,40 @@ ENTRY(cpu_arm920_set_pte_ext)
#endif
mov pc, lr
+/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
+.globl cpu_arm920_suspend_size
+.equ cpu_arm920_suspend_size, 4 * 3
+#ifdef CONFIG_PM
+ENTRY(cpu_arm920_do_suspend)
+ stmfd sp!, {r4 - r7, lr}
+ mrc p15, 0, r4, c13, c0, 0 @ PID
+ mrc p15, 0, r5, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r6, c2, c0, 0 @ TTB address
+ mrc p15, 0, r7, c1, c0, 0 @ Control register
+ stmia r0, {r4 - r7}
+ ldmfd sp!, {r4 - r7, pc}
+ENDPROC(cpu_arm920_do_suspend)
+
+ENTRY(cpu_arm920_do_resume)
+ mov ip, #0
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
+ ldmia r0, {r4 - r7}
+ mcr p15, 0, r4, c13, c0, 0 @ PID
+ mcr p15, 0, r5, c3, c0, 0 @ Domain ID
+ mcr p15, 0, r6, c2, c0, 0 @ TTB address
+ mov r0, r7 @ control register
+ mov r2, r6, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE
+ b cpu_resume_mmu
+ENDPROC(cpu_arm920_do_resume)
+#else
+#define cpu_arm920_do_suspend 0
+#define cpu_arm920_do_resume 0
+#endif
+
__CPUINIT
.type __arm920_setup, #function
@@ -432,6 +466,9 @@ arm920_processor_functions:
.word cpu_arm920_dcache_clean_area
.word cpu_arm920_switch_mm
.word cpu_arm920_set_pte_ext
+ .word cpu_arm920_suspend_size
+ .word cpu_arm920_do_suspend
+ .word cpu_arm920_do_resume
.size arm920_processor_functions, . - arm920_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index bb2f0f46a5e..36154b1e792 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -436,6 +436,9 @@ arm922_processor_functions:
.word cpu_arm922_dcache_clean_area
.word cpu_arm922_switch_mm
.word cpu_arm922_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm922_processor_functions, . - arm922_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index c13e01accfe..89c5e0009c4 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -503,6 +503,9 @@ arm925_processor_functions:
.word cpu_arm925_dcache_clean_area
.word cpu_arm925_switch_mm
.word cpu_arm925_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm925_processor_functions, . - arm925_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 42eb4315740..6a4bdb2c94a 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -401,6 +401,40 @@ ENTRY(cpu_arm926_set_pte_ext)
#endif
mov pc, lr
+/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
+.globl cpu_arm926_suspend_size
+.equ cpu_arm926_suspend_size, 4 * 3
+#ifdef CONFIG_PM
+ENTRY(cpu_arm926_do_suspend)
+ stmfd sp!, {r4 - r7, lr}
+ mrc p15, 0, r4, c13, c0, 0 @ PID
+ mrc p15, 0, r5, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r6, c2, c0, 0 @ TTB address
+ mrc p15, 0, r7, c1, c0, 0 @ Control register
+ stmia r0, {r4 - r7}
+ ldmfd sp!, {r4 - r7, pc}
+ENDPROC(cpu_arm926_do_suspend)
+
+ENTRY(cpu_arm926_do_resume)
+ mov ip, #0
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
+ ldmia r0, {r4 - r7}
+ mcr p15, 0, r4, c13, c0, 0 @ PID
+ mcr p15, 0, r5, c3, c0, 0 @ Domain ID
+ mcr p15, 0, r6, c2, c0, 0 @ TTB address
+ mov r0, r7 @ control register
+ mov r2, r6, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE
+ b cpu_resume_mmu
+ENDPROC(cpu_arm926_do_resume)
+#else
+#define cpu_arm926_do_suspend 0
+#define cpu_arm926_do_resume 0
+#endif
+
__CPUINIT
.type __arm926_setup, #function
@@ -456,6 +490,9 @@ arm926_processor_functions:
.word cpu_arm926_dcache_clean_area
.word cpu_arm926_switch_mm
.word cpu_arm926_set_pte_ext
+ .word cpu_arm926_suspend_size
+ .word cpu_arm926_do_suspend
+ .word cpu_arm926_do_resume
.size arm926_processor_functions, . - arm926_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 7b11cdb9935..26aea3f71c2 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -363,6 +363,9 @@ ENTRY(arm940_processor_functions)
.word cpu_arm940_dcache_clean_area
.word cpu_arm940_switch_mm
.word 0 @ cpu_*_set_pte
+ .word 0
+ .word 0
+ .word 0
.size arm940_processor_functions, . - arm940_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 1a5bbf08034..8063345406f 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -419,6 +419,9 @@ ENTRY(arm946_processor_functions)
.word cpu_arm946_dcache_clean_area
.word cpu_arm946_switch_mm
.word 0 @ cpu_*_set_pte
+ .word 0
+ .word 0
+ .word 0
.size arm946_processor_functions, . - arm946_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
index db67e3134d7..7b7ebd4d096 100644
--- a/arch/arm/mm/proc-arm9tdmi.S
+++ b/arch/arm/mm/proc-arm9tdmi.S
@@ -70,6 +70,9 @@ ENTRY(arm9tdmi_processor_functions)
.word cpu_arm9tdmi_dcache_clean_area
.word cpu_arm9tdmi_switch_mm
.word 0 @ cpu_*_set_pte
+ .word 0
+ .word 0
+ .word 0
.size arm9tdmi_processor_functions, . - arm9tdmi_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S
index 7c9ad621f0e..fc2a4ae15cf 100644
--- a/arch/arm/mm/proc-fa526.S
+++ b/arch/arm/mm/proc-fa526.S
@@ -195,6 +195,9 @@ fa526_processor_functions:
.word cpu_fa526_dcache_clean_area
.word cpu_fa526_switch_mm
.word cpu_fa526_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size fa526_processor_functions, . - fa526_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index b4597edbff9..d3883eed7a4 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -554,6 +554,9 @@ feroceon_processor_functions:
.word cpu_feroceon_dcache_clean_area
.word cpu_feroceon_switch_mm
.word cpu_feroceon_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size feroceon_processor_functions, . - feroceon_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index 4458ee6aa71..9d4f2ae6337 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -388,6 +388,9 @@ mohawk_processor_functions:
.word cpu_mohawk_dcache_clean_area
.word cpu_mohawk_switch_mm
.word cpu_mohawk_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size mohawk_processor_functions, . - mohawk_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index 5aa8d59c2e8..46f09ed16b9 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -203,6 +203,9 @@ ENTRY(sa110_processor_functions)
.word cpu_sa110_dcache_clean_area
.word cpu_sa110_switch_mm
.word cpu_sa110_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size sa110_processor_functions, . - sa110_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 2ac4e6f1071..74483d1977f 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -169,6 +169,42 @@ ENTRY(cpu_sa1100_set_pte_ext)
#endif
mov pc, lr
+.globl cpu_sa1100_suspend_size
+.equ cpu_sa1100_suspend_size, 4*4
+#ifdef CONFIG_PM
+ENTRY(cpu_sa1100_do_suspend)
+ stmfd sp!, {r4 - r7, lr}
+ mrc p15, 0, r4, c3, c0, 0 @ domain ID
+ mrc p15, 0, r5, c2, c0, 0 @ translation table base addr
+ mrc p15, 0, r6, c13, c0, 0 @ PID
+ mrc p15, 0, r7, c1, c0, 0 @ control reg
+ stmia r0, {r4 - r7} @ store cp regs
+ ldmfd sp!, {r4 - r7, pc}
+ENDPROC(cpu_sa1100_do_suspend)
+
+ENTRY(cpu_sa1100_do_resume)
+ ldmia r0, {r4 - r7} @ load cp regs
+ mov r1, #0
+ mcr p15, 0, r1, c8, c7, 0 @ flush I+D TLBs
+ mcr p15, 0, r1, c7, c7, 0 @ flush I&D cache
+ mcr p15, 0, r1, c9, c0, 0 @ invalidate RB
+ mcr p15, 0, r1, c9, c0, 5 @ allow user space to use RB
+
+ mcr p15, 0, r4, c3, c0, 0 @ domain ID
+ mcr p15, 0, r5, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r6, c13, c0, 0 @ PID
+ mov r0, r7 @ control register
+ mov r2, r5, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE
+ b cpu_resume_mmu
+ENDPROC(cpu_sa1100_do_resume)
+#else
+#define cpu_sa1100_do_suspend 0
+#define cpu_sa1100_do_resume 0
+#endif
+
__CPUINIT
.type __sa1100_setup, #function
@@ -218,6 +254,9 @@ ENTRY(sa1100_processor_functions)
.word cpu_sa1100_dcache_clean_area
.word cpu_sa1100_switch_mm
.word cpu_sa1100_set_pte_ext
+ .word cpu_sa1100_suspend_size
+ .word cpu_sa1100_do_suspend
+ .word cpu_sa1100_do_resume
.size sa1100_processor_functions, . - sa1100_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 59a7e1ffe7b..832b6bdc192 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -121,6 +121,53 @@ ENTRY(cpu_v6_set_pte_ext)
#endif
mov pc, lr
+/* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */
+.globl cpu_v6_suspend_size
+.equ cpu_v6_suspend_size, 4 * 8
+#ifdef CONFIG_PM
+ENTRY(cpu_v6_do_suspend)
+ stmfd sp!, {r4 - r11, lr}
+ mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mrc p15, 0, r5, c13, c0, 1 @ Context ID
+ mrc p15, 0, r6, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r7, c2, c0, 0 @ Translation table base 0
+ mrc p15, 0, r8, c2, c0, 1 @ Translation table base 1
+ mrc p15, 0, r9, c1, c0, 1 @ auxillary control register
+ mrc p15, 0, r10, c1, c0, 2 @ co-processor access control
+ mrc p15, 0, r11, c1, c0, 0 @ control register
+ stmia r0, {r4 - r11}
+ ldmfd sp!, {r4- r11, pc}
+ENDPROC(cpu_v6_do_suspend)
+
+ENTRY(cpu_v6_do_resume)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c14, 0 @ clean+invalidate D cache
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, ip, c7, c15, 0 @ clean+invalidate cache
+ mcr p15, 0, ip, c7, c10, 4 @ drain write buffer
+ ldmia r0, {r4 - r11}
+ mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mcr p15, 0, r5, c13, c0, 1 @ Context ID
+ mcr p15, 0, r6, c3, c0, 0 @ Domain ID
+ mcr p15, 0, r7, c2, c0, 0 @ Translation table base 0
+ mcr p15, 0, r8, c2, c0, 1 @ Translation table base 1
+ mcr p15, 0, r9, c1, c0, 1 @ auxillary control register
+ mcr p15, 0, r10, c1, c0, 2 @ co-processor access control
+ mcr p15, 0, ip, c2, c0, 2 @ TTB control register
+ mcr p15, 0, ip, c7, c5, 4 @ ISB
+ mov r0, r11 @ control register
+ mov r2, r7, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, cpu_resume_l1_flags
+ b cpu_resume_mmu
+ENDPROC(cpu_v6_do_resume)
+cpu_resume_l1_flags:
+ ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP)
+ ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP)
+#else
+#define cpu_v6_do_suspend 0
+#define cpu_v6_do_resume 0
+#endif
.type cpu_v6_name, #object
@@ -206,6 +253,9 @@ ENTRY(v6_processor_functions)
.word cpu_v6_dcache_clean_area
.word cpu_v6_switch_mm
.word cpu_v6_set_pte_ext
+ .word cpu_v6_suspend_size
+ .word cpu_v6_do_suspend
+ .word cpu_v6_do_resume
.size v6_processor_functions, . - v6_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 0c1172b56b4..262fa88a743 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -108,10 +108,16 @@ ENTRY(cpu_v7_switch_mm)
#ifdef CONFIG_ARM_ERRATA_430973
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
#endif
+#ifdef CONFIG_ARM_ERRATA_754322
+ dsb
+#endif
mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
isb
1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
isb
+#ifdef CONFIG_ARM_ERRATA_754322
+ dsb
+#endif
mcr p15, 0, r1, c13, c0, 1 @ set context ID
isb
#endif
@@ -171,6 +177,87 @@ cpu_v7_name:
.ascii "ARMv7 Processor"
.align
+ /*
+ * Memory region attributes with SCTLR.TRE=1
+ *
+ * n = TEX[0],C,B
+ * TR = PRRR[2n+1:2n] - memory type
+ * IR = NMRR[2n+1:2n] - inner cacheable property
+ * OR = NMRR[2n+17:2n+16] - outer cacheable property
+ *
+ * n TR IR OR
+ * UNCACHED 000 00
+ * BUFFERABLE 001 10 00 00
+ * WRITETHROUGH 010 10 10 10
+ * WRITEBACK 011 10 11 11
+ * reserved 110
+ * WRITEALLOC 111 10 01 01
+ * DEV_SHARED 100 01
+ * DEV_NONSHARED 100 01
+ * DEV_WC 001 10
+ * DEV_CACHED 011 10
+ *
+ * Other attributes:
+ *
+ * DS0 = PRRR[16] = 0 - device shareable property
+ * DS1 = PRRR[17] = 1 - device shareable property
+ * NS0 = PRRR[18] = 0 - normal shareable property
+ * NS1 = PRRR[19] = 1 - normal shareable property
+ * NOS = PRRR[24+n] = 1 - not outer shareable
+ */
+.equ PRRR, 0xff0a81a8
+.equ NMRR, 0x40e040e0
+
+/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
+.globl cpu_v7_suspend_size
+.equ cpu_v7_suspend_size, 4 * 8
+#ifdef CONFIG_PM
+ENTRY(cpu_v7_do_suspend)
+ stmfd sp!, {r4 - r11, lr}
+ mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mrc p15, 0, r5, c13, c0, 1 @ Context ID
+ mrc p15, 0, r6, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r7, c2, c0, 0 @ TTB 0
+ mrc p15, 0, r8, c2, c0, 1 @ TTB 1
+ mrc p15, 0, r9, c1, c0, 0 @ Control register
+ mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
+ mrc p15, 0, r11, c1, c0, 2 @ Co-processor access control
+ stmia r0, {r4 - r11}
+ ldmfd sp!, {r4 - r11, pc}
+ENDPROC(cpu_v7_do_suspend)
+
+ENTRY(cpu_v7_do_resume)
+ mov ip, #0
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ ldmia r0, {r4 - r11}
+ mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mcr p15, 0, r5, c13, c0, 1 @ Context ID
+ mcr p15, 0, r6, c3, c0, 0 @ Domain ID
+ mcr p15, 0, r7, c2, c0, 0 @ TTB 0
+ mcr p15, 0, r8, c2, c0, 1 @ TTB 1
+ mcr p15, 0, ip, c2, c0, 2 @ TTB control register
+ mcr p15, 0, r10, c1, c0, 1 @ Auxillary control register
+ mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control
+ ldr r4, =PRRR @ PRRR
+ ldr r5, =NMRR @ NMRR
+ mcr p15, 0, r4, c10, c2, 0 @ write PRRR
+ mcr p15, 0, r5, c10, c2, 1 @ write NMRR
+ isb
+ mov r0, r9 @ control register
+ mov r2, r7, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, cpu_resume_l1_flags
+ b cpu_resume_mmu
+ENDPROC(cpu_v7_do_resume)
+cpu_resume_l1_flags:
+ ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP)
+ ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP)
+#else
+#define cpu_v7_do_suspend 0
+#define cpu_v7_do_resume 0
+#endif
+
__CPUINIT
/*
@@ -264,6 +351,12 @@ __v7_setup:
orreq r10, r10, #1 << 6 @ set bit #6
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
+#ifdef CONFIG_ARM_ERRATA_751472
+ cmp r6, #0x30 @ present prior to r3p0
+ mrclt p15, 0, r10, c15, c0, 1 @ read diagnostic register
+ orrlt r10, r10, #1 << 11 @ set bit #11
+ mcrlt p15, 0, r10, c15, c0, 1 @ write diagnostic register
+#endif
3: mov r10, #0
#ifdef HARVARD_CACHE
@@ -276,36 +369,8 @@ __v7_setup:
ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP)
ALT_UP(orr r4, r4, #TTB_FLAGS_UP)
mcr p15, 0, r4, c2, c0, 1 @ load TTB1
- /*
- * Memory region attributes with SCTLR.TRE=1
- *
- * n = TEX[0],C,B
- * TR = PRRR[2n+1:2n] - memory type
- * IR = NMRR[2n+1:2n] - inner cacheable property
- * OR = NMRR[2n+17:2n+16] - outer cacheable property
- *
- * n TR IR OR
- * UNCACHED 000 00
- * BUFFERABLE 001 10 00 00
- * WRITETHROUGH 010 10 10 10
- * WRITEBACK 011 10 11 11
- * reserved 110
- * WRITEALLOC 111 10 01 01
- * DEV_SHARED 100 01
- * DEV_NONSHARED 100 01
- * DEV_WC 001 10
- * DEV_CACHED 011 10
- *
- * Other attributes:
- *
- * DS0 = PRRR[16] = 0 - device shareable property
- * DS1 = PRRR[17] = 1 - device shareable property
- * NS0 = PRRR[18] = 0 - normal shareable property
- * NS1 = PRRR[19] = 1 - normal shareable property
- * NOS = PRRR[24+n] = 1 - not outer shareable
- */
- ldr r5, =0xff0a81a8 @ PRRR
- ldr r6, =0x40e040e0 @ NMRR
+ ldr r5, =PRRR @ PRRR
+ ldr r6, =NMRR @ NMRR
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
mcr p15, 0, r6, c10, c2, 1 @ write NMRR
#endif
@@ -351,6 +416,9 @@ ENTRY(v7_processor_functions)
.word cpu_v7_dcache_clean_area
.word cpu_v7_switch_mm
.word cpu_v7_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size v7_processor_functions, . - v7_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index ec26355cb7c..63d8b2044e8 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -413,9 +413,52 @@ ENTRY(cpu_xsc3_set_pte_ext)
mov pc, lr
.ltorg
-
.align
+.globl cpu_xsc3_suspend_size
+.equ cpu_xsc3_suspend_size, 4 * 8
+#ifdef CONFIG_PM
+ENTRY(cpu_xsc3_do_suspend)
+ stmfd sp!, {r4 - r10, lr}
+ mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
+ mrc p15, 0, r5, c15, c1, 0 @ CP access reg
+ mrc p15, 0, r6, c13, c0, 0 @ PID
+ mrc p15, 0, r7, c3, c0, 0 @ domain ID
+ mrc p15, 0, r8, c2, c0, 0 @ translation table base addr
+ mrc p15, 0, r9, c1, c0, 1 @ auxiliary control reg
+ mrc p15, 0, r10, c1, c0, 0 @ control reg
+ bic r4, r4, #2 @ clear frequency change bit
+ stmia r0, {r1, r4 - r10} @ store v:p offset + cp regs
+ ldmia sp!, {r4 - r10, pc}
+ENDPROC(cpu_xsc3_do_suspend)
+
+ENTRY(cpu_xsc3_do_resume)
+ ldmia r0, {r1, r4 - r10} @ load v:p offset + cp regs
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
+ mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer
+ mcr p15, 0, ip, c7, c5, 4 @ flush prefetch buffer
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mcr p14, 0, r4, c6, c0, 0 @ clock configuration, turbo mode.
+ mcr p15, 0, r5, c15, c1, 0 @ CP access reg
+ mcr p15, 0, r6, c13, c0, 0 @ PID
+ mcr p15, 0, r7, c3, c0, 0 @ domain ID
+ mcr p15, 0, r8, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r9, c1, c0, 1 @ auxiliary control reg
+
+ @ temporarily map resume_turn_on_mmu into the page table,
+ @ otherwise prefetch abort occurs after MMU is turned on
+ mov r0, r10 @ control register
+ mov r2, r8, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, =0x542e @ section flags
+ b cpu_resume_mmu
+ENDPROC(cpu_xsc3_do_resume)
+#else
+#define cpu_xsc3_do_suspend 0
+#define cpu_xsc3_do_resume 0
+#endif
+
__CPUINIT
.type __xsc3_setup, #function
@@ -476,6 +519,9 @@ ENTRY(xsc3_processor_functions)
.word cpu_xsc3_dcache_clean_area
.word cpu_xsc3_switch_mm
.word cpu_xsc3_set_pte_ext
+ .word cpu_xsc3_suspend_size
+ .word cpu_xsc3_do_suspend
+ .word cpu_xsc3_do_resume
.size xsc3_processor_functions, . - xsc3_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 5a37c5e45c4..086038cd86a 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -513,11 +513,49 @@ ENTRY(cpu_xscale_set_pte_ext)
xscale_set_pte_ext_epilogue
mov pc, lr
-
.ltorg
-
.align
+.globl cpu_xscale_suspend_size
+.equ cpu_xscale_suspend_size, 4 * 7
+#ifdef CONFIG_PM
+ENTRY(cpu_xscale_do_suspend)
+ stmfd sp!, {r4 - r10, lr}
+ mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
+ mrc p15, 0, r5, c15, c1, 0 @ CP access reg
+ mrc p15, 0, r6, c13, c0, 0 @ PID
+ mrc p15, 0, r7, c3, c0, 0 @ domain ID
+ mrc p15, 0, r8, c2, c0, 0 @ translation table base addr
+ mrc p15, 0, r9, c1, c1, 0 @ auxiliary control reg
+ mrc p15, 0, r10, c1, c0, 0 @ control reg
+ bic r4, r4, #2 @ clear frequency change bit
+ stmia r0, {r4 - r10} @ store cp regs
+ ldmfd sp!, {r4 - r10, pc}
+ENDPROC(cpu_xscale_do_suspend)
+
+ENTRY(cpu_xscale_do_resume)
+ ldmia r0, {r4 - r10} @ load cp regs
+ mov ip, #0
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
+ mcr p14, 0, r4, c6, c0, 0 @ clock configuration, turbo mode.
+ mcr p15, 0, r5, c15, c1, 0 @ CP access reg
+ mcr p15, 0, r6, c13, c0, 0 @ PID
+ mcr p15, 0, r7, c3, c0, 0 @ domain ID
+ mcr p15, 0, r8, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r9, c1, c1, 0 @ auxiliary control reg
+ mov r0, r10 @ control register
+ mov r2, r8, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE
+ b cpu_resume_mmu
+ENDPROC(cpu_xscale_do_resume)
+#else
+#define cpu_xscale_do_suspend 0
+#define cpu_xscale_do_resume 0
+#endif
+
__CPUINIT
.type __xscale_setup, #function
@@ -565,6 +603,9 @@ ENTRY(xscale_processor_functions)
.word cpu_xscale_dcache_clean_area
.word cpu_xscale_switch_mm
.word cpu_xscale_set_pte_ext
+ .word cpu_xscale_suspend_size
+ .word cpu_xscale_do_suspend
+ .word cpu_xscale_do_resume
.size xscale_processor_functions, . - xscale_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/vmregion.c b/arch/arm/mm/vmregion.c
index 935993e1b1e..036fdbfdd62 100644
--- a/arch/arm/mm/vmregion.c
+++ b/arch/arm/mm/vmregion.c
@@ -38,7 +38,7 @@ struct arm_vmregion *
arm_vmregion_alloc(struct arm_vmregion_head *head, size_t align,
size_t size, gfp_t gfp)
{
- unsigned long addr = head->vm_start, end = head->vm_end - size;
+ unsigned long start = head->vm_start, addr = head->vm_end;
unsigned long flags;
struct arm_vmregion *c, *new;
@@ -54,21 +54,20 @@ arm_vmregion_alloc(struct arm_vmregion_head *head, size_t align,
spin_lock_irqsave(&head->vm_lock, flags);
- list_for_each_entry(c, &head->vm_list, vm_list) {
- if ((addr + size) < addr)
- goto nospc;
- if ((addr + size) <= c->vm_start)
+ addr = rounddown(addr - size, align);
+ list_for_each_entry_reverse(c, &head->vm_list, vm_list) {
+ if (addr >= c->vm_end)
goto found;
- addr = ALIGN(c->vm_end, align);
- if (addr > end)
+ addr = rounddown(c->vm_start - size, align);
+ if (addr < start)
goto nospc;
}
found:
/*
- * Insert this entry _before_ the one we found.
+ * Insert this entry after the one we found.
*/
- list_add_tail(&new->vm_list, &c->vm_list);
+ list_add(&new->vm_list, &c->vm_list);
new->vm_start = addr;
new->vm_end = addr + size;
new->vm_active = 1;
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index 8aa974491df..c074e66ad22 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -10,8 +10,6 @@
*/
#include <linux/cpumask.h>
-#include <linux/err.h>
-#include <linux/errno.h>
#include <linux/init.h>
#include <linux/mutex.h>
#include <linux/oprofile.h>
@@ -46,6 +44,7 @@ char *op_name_from_perf_id(void)
return NULL;
}
}
+#endif
static int report_trace(struct stackframe *frame, void *d)
{
@@ -85,7 +84,7 @@ static struct frame_tail* user_backtrace(struct frame_tail *tail)
/* frame pointers should strictly progress back up the stack
* (towards higher addresses) */
- if (tail >= buftail[0].fp)
+ if (tail + 1 >= buftail[0].fp)
return NULL;
return buftail[0].fp-1;
@@ -111,6 +110,7 @@ static void arm_backtrace(struct pt_regs * const regs, unsigned int depth)
int __init oprofile_arch_init(struct oprofile_operations *ops)
{
+ /* provide backtrace support also in timer mode: */
ops->backtrace = arm_backtrace;
return oprofile_perf_init(ops);
@@ -120,11 +120,3 @@ void __exit oprofile_arch_exit(void)
{
oprofile_perf_exit();
}
-#else
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
- pr_info("oprofile: hardware counters not available\n");
- return -ENODEV;
-}
-void __exit oprofile_arch_exit(void) {}
-#endif /* CONFIG_HW_PERF_EVENTS */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 3a70ebf0477..ff469c4f1d7 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -95,6 +95,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
case MACH_TYPE_MX35_3DS:
case MACH_TYPE_PCM043:
case MACH_TYPE_LILLY1131:
+ case MACH_TYPE_VPR200:
uart_base = MX3X_UART1_BASE_ADDR;
break;
case MACH_TYPE_MAGX_ZN5:
@@ -102,6 +103,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
break;
case MACH_TYPE_MX51_BABBAGE:
case MACH_TYPE_EUKREA_CPUIMX51SD:
+ case MACH_TYPE_MX51_3DS:
uart_base = MX51_UART1_BASE_ADDR;
break;
case MACH_TYPE_MX50_RDP:
diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h
index 9967d5e855c..f500fc34d06 100644
--- a/arch/arm/plat-omap/include/plat/sram.h
+++ b/arch/arm/plat-omap/include/plat/sram.h
@@ -12,7 +12,19 @@
#define __ARCH_ARM_OMAP_SRAM_H
#ifndef __ASSEMBLY__
-extern void * omap_sram_push(void * start, unsigned long size);
+#include <asm/fncpy.h>
+
+extern void *omap_sram_push_address(unsigned long size);
+
+/* Macro to push a function to the internal SRAM, using the fncpy API */
+#define omap_sram_push(funcp, size) ({ \
+ typeof(&(funcp)) _res = NULL; \
+ void *_sram_address = omap_sram_push_address(size); \
+ if (_sram_address) \
+ _res = fncpy(_sram_address, &(funcp), size); \
+ _res; \
+})
+
extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 459b319a9fa..49d3208793e 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -322,15 +322,18 @@ static void omap_mbox_fini(struct omap_mbox *mbox)
struct omap_mbox *omap_mbox_get(const char *name, struct notifier_block *nb)
{
- struct omap_mbox *mbox;
- int ret;
+ struct omap_mbox *_mbox, *mbox = NULL;
+ int i, ret;
if (!mboxes)
return ERR_PTR(-EINVAL);
- for (mbox = *mboxes; mbox; mbox++)
- if (!strcmp(mbox->name, name))
+ for (i = 0; (_mbox = mboxes[i]); i++) {
+ if (!strcmp(_mbox->name, name)) {
+ mbox = _mbox;
break;
+ }
+ }
if (!mbox)
return ERR_PTR(-ENOENT);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index e26e50487d6..68fcc7dc56e 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -242,7 +242,14 @@ static void __init omap_map_sram(void)
omap_sram_size - SRAM_BOOTLOADER_SZ);
}
-void * omap_sram_push(void * start, unsigned long size)
+/*
+ * Memory allocator for SRAM: calculates the new ceiling address
+ * for pushing a function using the fncpy API.
+ *
+ * Note that fncpy requires the returned address to be aligned
+ * to an 8-byte boundary.
+ */
+void *omap_sram_push_address(unsigned long size)
{
if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
printk(KERN_ERR "Not enough space in SRAM\n");
@@ -250,10 +257,7 @@ void * omap_sram_push(void * start, unsigned long size)
}
omap_sram_ceil -= size;
- omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, sizeof(void *));
- memcpy((void *)omap_sram_ceil, start, size);
- flush_icache_range((unsigned long)omap_sram_ceil,
- (unsigned long)(omap_sram_ceil + size));
+ omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, FNCPY_ALIGN);
return (void *)omap_sram_ceil;
}
diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c
index b77e018d36c..a9aa5ad3f4e 100644
--- a/arch/arm/plat-pxa/mfp.c
+++ b/arch/arm/plat-pxa/mfp.c
@@ -139,10 +139,11 @@ static const unsigned long mfpr_edge[] = {
#define mfp_configured(p) ((p)->config != -1)
/*
- * perform a read-back of any MFPR register to make sure the
+ * perform a read-back of any valid MFPR register to make sure the
* previous writings are finished
*/
-#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0)
+static unsigned long mfpr_off_readback;
+#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + mfpr_off_readback)
static inline void __mfp_config_run(struct mfp_pin *p)
{
@@ -248,6 +249,9 @@ void __init mfp_init_addr(struct mfp_addr_map *map)
spin_lock_irqsave(&mfp_spin_lock, flags);
+ /* mfp offset for readback */
+ mfpr_off_readback = map[0].offset;
+
for (p = map; p->start != MFP_PIN_INVALID; p++) {
offset = p->offset;
i = p->start;
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index e73e3b6e88d..fd7032f84ae 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -44,23 +44,13 @@
/* s3c_cpu_save
*
* entry:
- * r0 = save address (virtual addr of s3c_sleep_save_phys)
+ * r1 = v:p offset
*/
ENTRY(s3c_cpu_save)
stmfd sp!, { r4 - r12, lr }
-
- @@ store co-processor registers
-
- mrc p15, 0, r4, c13, c0, 0 @ PID
- mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ translation table base address
- mrc p15, 0, r7, c1, c0, 0 @ control register
-
- stmia r0, { r4 - r13 }
-
- @@ write our state back to RAM
- bl s3c_pm_cb_flushcache
+ ldr r3, =resume_with_mmu
+ bl cpu_suspend
@@ jump to final code to send system to sleep
ldr r0, =pm_cpu_sleep
@@ -76,20 +66,6 @@ resume_with_mmu:
.ltorg
- @@ the next bits sit in the .data segment, even though they
- @@ happen to be code... the s3c_sleep_save_phys needs to be
- @@ accessed by the resume code before it can restore the MMU.
- @@ This means that the variable has to be close enough for the
- @@ code to read it... since the .text segment needs to be RO,
- @@ the data segment can be the only place to put this code.
-
- .data
-
- .global s3c_sleep_save_phys
-s3c_sleep_save_phys:
- .word 0
-
-
/* sleep magic, to allow the bootloader to check for an valid
* image to resume to. Must be the first word before the
* s3c_cpu_resume entry.
@@ -100,10 +76,6 @@ s3c_sleep_save_phys:
/* s3c_cpu_resume
*
* resume code entry for bootloader to call
- *
- * we must put this code here in the data segment as we have no
- * other way of restoring the stack pointer after sleep, and we
- * must not write to the code segment (code is read-only)
*/
ENTRY(s3c_cpu_resume)
@@ -134,25 +106,4 @@ ENTRY(s3c_cpu_resume)
beq 1001b
#endif /* CONFIG_DEBUG_RESUME */
- mov r1, #0
- mcr p15, 0, r1, c8, c7, 0 @@ invalidate I & D TLBs
- mcr p15, 0, r1, c7, c7, 0 @@ invalidate I & D caches
-
- ldr r0, s3c_sleep_save_phys @ address of restore block
- ldmia r0, { r4 - r13 }
-
- mcr p15, 0, r4, c13, c0, 0 @ PID
- mcr p15, 0, r5, c3, c0, 0 @ Domain ID
- mcr p15, 0, r6, c2, c0, 0 @ translation table base
-
-#ifdef CONFIG_DEBUG_RESUME
- mov r3, #'R'
- strb r3, [ r2, #S3C2410_UTXH ]
-#endif
-
- ldr r2, =resume_with_mmu
- mcr p15, 0, r7, c1, c0, 0 @ turn on MMU, etc
- nop @ second-to-last before mmu
- mov pc, r2 @ go back to virtual address
-
- .ltorg
+ b cpu_resume
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index deb39951a22..557f8c507f6 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -37,6 +37,14 @@ config S5P_GPIO_INT
help
Common code for the GPIO interrupts (other than external interrupts.)
+comment "System MMU"
+
+config S5P_SYSTEM_MMU
+ bool "S5P SYSTEM MMU"
+ depends on ARCH_S5PV310
+ help
+ Say Y here if you want to enable System MMU
+
config S5P_DEV_FIMC0
bool
help
@@ -66,19 +74,3 @@ config S5P_DEV_CSIS1
bool
help
Compile in platform device definitions for MIPI-CSIS channel 1
-
-menuconfig S5P_SYSMMU
- bool "SYSMMU support"
- depends on ARCH_S5PV310
- help
- This is a System MMU driver for Samsung ARM based Soc.
-
-if S5P_SYSMMU
-
-config S5P_SYSMMU_DEBUG
- bool "Enables debug messages"
- depends on S5P_SYSMMU
- help
- This enables SYSMMU driver debug massages.
-
-endif
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 92efe1adcfd..4bd5cf90897 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -19,6 +19,7 @@ obj-y += clock.o
obj-y += irq.o
obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o
+obj-$(CONFIG_S5P_SYSTEM_MMU) += sysmmu.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += irq-pm.o
@@ -30,4 +31,3 @@ obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o
obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o
obj-$(CONFIG_S5P_DEV_CSIS0) += dev-csis0.o
obj-$(CONFIG_S5P_DEV_CSIS1) += dev-csis1.o
-obj-$(CONFIG_S5P_SYSMMU) += sysmmu.o
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
index 6a734288617..afaf87fdb93 100644
--- a/arch/arm/plat-s5p/dev-uart.c
+++ b/arch/arm/plat-s5p/dev-uart.c
@@ -28,7 +28,7 @@
static struct resource s5p_uart0_resource[] = {
[0] = {
.start = S5P_PA_UART0,
- .end = S5P_PA_UART0 + S5P_SZ_UART,
+ .end = S5P_PA_UART0 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -51,7 +51,7 @@ static struct resource s5p_uart0_resource[] = {
static struct resource s5p_uart1_resource[] = {
[0] = {
.start = S5P_PA_UART1,
- .end = S5P_PA_UART1 + S5P_SZ_UART,
+ .end = S5P_PA_UART1 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -74,7 +74,7 @@ static struct resource s5p_uart1_resource[] = {
static struct resource s5p_uart2_resource[] = {
[0] = {
.start = S5P_PA_UART2,
- .end = S5P_PA_UART2 + S5P_SZ_UART,
+ .end = S5P_PA_UART2 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -98,7 +98,7 @@ static struct resource s5p_uart3_resource[] = {
#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
[0] = {
.start = S5P_PA_UART3,
- .end = S5P_PA_UART3 + S5P_SZ_UART,
+ .end = S5P_PA_UART3 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -123,7 +123,7 @@ static struct resource s5p_uart4_resource[] = {
#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
[0] = {
.start = S5P_PA_UART4,
- .end = S5P_PA_UART4 + S5P_SZ_UART,
+ .end = S5P_PA_UART4 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -148,7 +148,7 @@ static struct resource s5p_uart5_resource[] = {
#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
[0] = {
.start = S5P_PA_UART5,
- .end = S5P_PA_UART5 + S5P_SZ_UART,
+ .end = S5P_PA_UART5 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
diff --git a/arch/arm/plat-s5p/include/plat/sysmmu.h b/arch/arm/plat-s5p/include/plat/sysmmu.h
deleted file mode 100644
index db298fc5438..00000000000
--- a/arch/arm/plat-s5p/include/plat/sysmmu.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Samsung sysmmu driver
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_SYSMMU_H
-#define __ASM_PLAT_S5P_SYSMMU_H __FILE__
-
-/* debug macro */
-#ifdef CONFIG_S5P_SYSMMU_DEBUG
-#define sysmmu_debug(fmt, arg...) printk(KERN_INFO "[%s] " fmt, __func__, ## arg)
-#else
-#define sysmmu_debug(fmt, arg...) do { } while (0)
-#endif
-
-#endif /* __ASM_PLAT_S5P_SYSMMU_H */
diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c
index d804914dc2e..ffe8a48bc3c 100644
--- a/arch/arm/plat-s5p/sysmmu.c
+++ b/arch/arm/plat-s5p/sysmmu.c
@@ -16,8 +16,6 @@
#include <mach/regs-sysmmu.h>
#include <mach/sysmmu.h>
-#include <plat/sysmmu.h>
-
struct sysmmu_controller s5p_sysmmu_cntlrs[S5P_SYSMMU_TOTAL_IPNUM];
void s5p_sysmmu_register(struct sysmmu_controller *sysmmuconp)
@@ -123,7 +121,7 @@ static int s5p_sysmmu_set_tablebase(sysmmu_ips ips)
: "=r" (pg) : : "cc"); \
pg &= ~0x3fff;
- sysmmu_debug("CP15 TTBR0 : 0x%x\n", pg);
+ printk(KERN_INFO "%s: CP15 TTBR0 : 0x%x\n", __func__, pg);
/* Set sysmmu page table base address */
__raw_writel(pg, sysmmuconp->regs + S5P_PT_BASE_ADDR);
diff --git a/arch/arm/plat-samsung/dev-ts.c b/arch/arm/plat-samsung/dev-ts.c
index 236ef8427d7..3e4bd8147bf 100644
--- a/arch/arm/plat-samsung/dev-ts.c
+++ b/arch/arm/plat-samsung/dev-ts.c
@@ -58,4 +58,3 @@ void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
s3c_device_ts.dev.platform_data = npd;
}
-EXPORT_SYMBOL(s3c24xx_ts_set_platdata);
diff --git a/arch/arm/plat-samsung/dev-uart.c b/arch/arm/plat-samsung/dev-uart.c
index 3776cd95245..5928105490f 100644
--- a/arch/arm/plat-samsung/dev-uart.c
+++ b/arch/arm/plat-samsung/dev-uart.c
@@ -15,6 +15,8 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <plat/devs.h>
+
/* uart devices */
static struct platform_device s3c24xx_uart_device0 = {
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index d9025e37767..937cc2ace51 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -17,6 +17,8 @@
#include <linux/irq.h>
+struct sys_device;
+
#ifdef CONFIG_PM
extern __init int s3c_pm_init(void);
@@ -50,13 +52,11 @@ extern unsigned char pm_uart_udivslot; /* true to save UART UDIVSLOT */
/* from sleep.S */
-extern int s3c_cpu_save(unsigned long *saveblk);
+extern int s3c_cpu_save(unsigned long *saveblk, long);
extern void s3c_cpu_resume(void);
extern void s3c2410_cpu_suspend(void);
-extern unsigned long s3c_sleep_save_phys;
-
/* sleep save info */
/**
@@ -179,13 +179,5 @@ extern void s3c_pm_restore_gpios(void);
*/
extern void s3c_pm_save_gpios(void);
-/**
- * s3c_pm_cb_flushcache - callback for assembly code
- *
- * Callback to issue flush_cache_all() as this call is
- * not a directly callable object.
- */
-extern void s3c_pm_cb_flushcache(void);
-
extern void s3c_pm_save_core(void);
extern void s3c_pm_restore_core(void);
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index 02d531fb3f8..d5b58d31903 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -241,8 +241,6 @@ void (*pm_cpu_sleep)(void);
static int s3c_pm_enter(suspend_state_t state)
{
- static unsigned long regs_save[16];
-
/* ensure the debug is initialised (if enabled) */
s3c_pm_debug_init();
@@ -266,12 +264,6 @@ static int s3c_pm_enter(suspend_state_t state)
return -EINVAL;
}
- /* store the physical address of the register recovery block */
-
- s3c_sleep_save_phys = virt_to_phys(regs_save);
-
- S3C_PMDBG("s3c_sleep_save_phys=0x%08lx\n", s3c_sleep_save_phys);
-
/* save all necessary core registers not covered by the drivers */
s3c_pm_save_gpios();
@@ -305,7 +297,7 @@ static int s3c_pm_enter(suspend_state_t state)
* we resume as it saves its own register state and restores it
* during the resume. */
- s3c_cpu_save(regs_save);
+ s3c_cpu_save(0, PLAT_PHYS_OFFSET - PAGE_OFFSET);
/* restore the cpu state using the kernel's cpu init code. */
@@ -336,12 +328,6 @@ static int s3c_pm_enter(suspend_state_t state)
return 0;
}
-/* callback from assembly code */
-void s3c_pm_cb_flushcache(void)
-{
- flush_cache_all();
-}
-
static int s3c_pm_prepare(void)
{
/* prepare check area if configured */
diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile
index eb89540aeda..b4f340b8f1f 100644
--- a/arch/arm/plat-spear/Makefile
+++ b/arch/arm/plat-spear/Makefile
@@ -3,6 +3,6 @@
#
# Common support
-obj-y := clock.o padmux.o time.o
+obj-y := clock.o time.o
-obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o
+obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o padmux.o
diff --git a/arch/arm/plat-spear/clock.c b/arch/arm/plat-spear/clock.c
index ee4f90e534d..bdbd7ec9cb6 100644
--- a/arch/arm/plat-spear/clock.c
+++ b/arch/arm/plat-spear/clock.c
@@ -12,18 +12,25 @@
*/
#include <linux/bug.h>
+#include <linux/clk.h>
+#include <linux/debugfs.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/spinlock.h>
-#include <mach/misc_regs.h>
#include <plat/clock.h>
static DEFINE_SPINLOCK(clocks_lock);
static LIST_HEAD(root_clks);
+#ifdef CONFIG_DEBUG_FS
+static LIST_HEAD(clocks);
+#endif
-static void propagate_rate(struct list_head *);
+static void propagate_rate(struct clk *, int on_init);
+#ifdef CONFIG_DEBUG_FS
+static int clk_debugfs_reparent(struct clk *);
+#endif
static int generic_clk_enable(struct clk *clk)
{
@@ -65,6 +72,104 @@ static struct clkops generic_clkops = {
.disable = generic_clk_disable,
};
+/* returns current programmed clocks clock info structure */
+static struct pclk_info *pclk_info_get(struct clk *clk)
+{
+ unsigned int val, i;
+ struct pclk_info *info = NULL;
+
+ val = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift)
+ & clk->pclk_sel->pclk_sel_mask;
+
+ for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
+ if (clk->pclk_sel->pclk_info[i].pclk_val == val)
+ info = &clk->pclk_sel->pclk_info[i];
+ }
+
+ return info;
+}
+
+/*
+ * Set Update pclk, and pclk_info of clk and add clock sibling node to current
+ * parents children list
+ */
+static void clk_reparent(struct clk *clk, struct pclk_info *pclk_info)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ list_del(&clk->sibling);
+ list_add(&clk->sibling, &pclk_info->pclk->children);
+
+ clk->pclk = pclk_info->pclk;
+ spin_unlock_irqrestore(&clocks_lock, flags);
+
+#ifdef CONFIG_DEBUG_FS
+ clk_debugfs_reparent(clk);
+#endif
+}
+
+static void do_clk_disable(struct clk *clk)
+{
+ if (!clk)
+ return;
+
+ if (!clk->usage_count) {
+ WARN_ON(1);
+ return;
+ }
+
+ clk->usage_count--;
+
+ if (clk->usage_count == 0) {
+ /*
+ * Surely, there are no active childrens or direct users
+ * of this clock
+ */
+ if (clk->pclk)
+ do_clk_disable(clk->pclk);
+
+ if (clk->ops && clk->ops->disable)
+ clk->ops->disable(clk);
+ }
+}
+
+static int do_clk_enable(struct clk *clk)
+{
+ int ret = 0;
+
+ if (!clk)
+ return -EFAULT;
+
+ if (clk->usage_count == 0) {
+ if (clk->pclk) {
+ ret = do_clk_enable(clk->pclk);
+ if (ret)
+ goto err;
+ }
+ if (clk->ops && clk->ops->enable) {
+ ret = clk->ops->enable(clk);
+ if (ret) {
+ if (clk->pclk)
+ do_clk_disable(clk->pclk);
+ goto err;
+ }
+ }
+ /*
+ * Since the clock is going to be used for the first
+ * time please reclac
+ */
+ if (clk->recalc) {
+ ret = clk->recalc(clk);
+ if (ret)
+ goto err;
+ }
+ }
+ clk->usage_count++;
+err:
+ return ret;
+}
+
/*
* clk_enable - inform the system when the clock source should be running.
* @clk: clock source
@@ -78,17 +183,9 @@ int clk_enable(struct clk *clk)
unsigned long flags;
int ret = 0;
- if (!clk || IS_ERR(clk))
- return -EFAULT;
-
spin_lock_irqsave(&clocks_lock, flags);
- if (clk->usage_count == 0) {
- if (clk->ops && clk->ops->enable)
- ret = clk->ops->enable(clk);
- }
- clk->usage_count++;
+ ret = do_clk_enable(clk);
spin_unlock_irqrestore(&clocks_lock, flags);
-
return ret;
}
EXPORT_SYMBOL(clk_enable);
@@ -109,17 +206,8 @@ void clk_disable(struct clk *clk)
{
unsigned long flags;
- if (!clk || IS_ERR(clk))
- return;
-
- WARN_ON(clk->usage_count == 0);
-
spin_lock_irqsave(&clocks_lock, flags);
- clk->usage_count--;
- if (clk->usage_count == 0) {
- if (clk->ops && clk->ops->disable)
- clk->ops->disable(clk);
- }
+ do_clk_disable(clk);
spin_unlock_irqrestore(&clocks_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
@@ -153,15 +241,14 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
int i, found = 0, val = 0;
unsigned long flags;
- if (!clk || IS_ERR(clk) || !parent || IS_ERR(parent))
+ if (!clk || !parent)
return -EFAULT;
- if (clk->usage_count)
- return -EBUSY;
- if (!clk->pclk_sel)
- return -EPERM;
if (clk->pclk == parent)
return 0;
+ if (!clk->pclk_sel)
+ return -EPERM;
+ /* check if requested parent is in clk parent list */
for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
if (clk->pclk_sel->pclk_info[i].pclk == parent) {
found = 1;
@@ -176,25 +263,58 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
/* reflect parent change in hardware */
val = readl(clk->pclk_sel->pclk_sel_reg);
val &= ~(clk->pclk_sel->pclk_sel_mask << clk->pclk_sel_shift);
- val |= clk->pclk_sel->pclk_info[i].pclk_mask << clk->pclk_sel_shift;
+ val |= clk->pclk_sel->pclk_info[i].pclk_val << clk->pclk_sel_shift;
writel(val, clk->pclk_sel->pclk_sel_reg);
spin_unlock_irqrestore(&clocks_lock, flags);
/* reflect parent change in software */
- clk->recalc(clk);
- propagate_rate(&clk->children);
+ clk_reparent(clk, &clk->pclk_sel->pclk_info[i]);
+
+ propagate_rate(clk, 0);
return 0;
}
EXPORT_SYMBOL(clk_set_parent);
+/**
+ * clk_set_rate - set the clock rate for a clock source
+ * @clk: clock source
+ * @rate: desired clock rate in Hz
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ if (!clk || !rate)
+ return -EFAULT;
+
+ if (clk->set_rate) {
+ spin_lock_irqsave(&clocks_lock, flags);
+ ret = clk->set_rate(clk, rate);
+ if (!ret)
+ /* if successful -> propagate */
+ propagate_rate(clk, 0);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+ } else if (clk->pclk) {
+ u32 mult = clk->div_factor ? clk->div_factor : 1;
+ ret = clk_set_rate(clk->pclk, mult * rate);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
/* registers clock in platform clock framework */
void clk_register(struct clk_lookup *cl)
{
- struct clk *clk = cl->clk;
+ struct clk *clk;
unsigned long flags;
- if (!clk || IS_ERR(clk))
+ if (!cl || !cl->clk)
return;
+ clk = cl->clk;
spin_lock_irqsave(&clocks_lock, flags);
@@ -207,71 +327,173 @@ void clk_register(struct clk_lookup *cl)
/* root clock don't have any parents */
if (!clk->pclk && !clk->pclk_sel) {
list_add(&clk->sibling, &root_clks);
- /* add clocks with only one parent to parent's children list */
} else if (clk->pclk && !clk->pclk_sel) {
+ /* add clocks with only one parent to parent's children list */
list_add(&clk->sibling, &clk->pclk->children);
} else {
- /* add clocks with > 1 parent to 1st parent's children list */
- list_add(&clk->sibling,
- &clk->pclk_sel->pclk_info[0].pclk->children);
+ /* clocks with more than one parent */
+ struct pclk_info *pclk_info;
+
+ pclk_info = pclk_info_get(clk);
+ if (!pclk_info) {
+ pr_err("CLKDEV: invalid pclk info of clk with"
+ " %s dev_id and %s con_id\n",
+ cl->dev_id, cl->con_id);
+ } else {
+ clk->pclk = pclk_info->pclk;
+ list_add(&clk->sibling, &pclk_info->pclk->children);
+ }
}
+
spin_unlock_irqrestore(&clocks_lock, flags);
+ /* debugfs specific */
+#ifdef CONFIG_DEBUG_FS
+ list_add(&clk->node, &clocks);
+ clk->cl = cl;
+#endif
+
/* add clock to arm clockdev framework */
clkdev_add(cl);
}
/**
- * propagate_rate - recalculate and propagate all clocks in list head
+ * propagate_rate - recalculate and propagate all clocks to children
+ * @pclk: parent clock required to be propogated
+ * @on_init: flag for enabling clocks which are ENABLED_ON_INIT.
*
- * Recalculates all root clocks in list head, which if the clock's .recalc is
- * set correctly, should also propagate their rates.
+ * Recalculates all children clocks
*/
-static void propagate_rate(struct list_head *lhead)
+void propagate_rate(struct clk *pclk, int on_init)
{
- struct clk *clkp, *_temp;
+ struct clk *clk, *_temp;
+ int ret = 0;
- list_for_each_entry_safe(clkp, _temp, lhead, sibling) {
- if (clkp->recalc)
- clkp->recalc(clkp);
- propagate_rate(&clkp->children);
+ list_for_each_entry_safe(clk, _temp, &pclk->children, sibling) {
+ if (clk->recalc) {
+ ret = clk->recalc(clk);
+ /*
+ * recalc will return error if clk out is not programmed
+ * In this case configure default rate.
+ */
+ if (ret && clk->set_rate)
+ clk->set_rate(clk, 0);
+ }
+ propagate_rate(clk, on_init);
+
+ if (!on_init)
+ continue;
+
+ /* Enable clks enabled on init, in software view */
+ if (clk->flags & ENABLED_ON_INIT)
+ do_clk_enable(clk);
}
}
-/* returns current programmed clocks clock info structure */
-static struct pclk_info *pclk_info_get(struct clk *clk)
+/**
+ * round_rate_index - return closest programmable rate index in rate_config tbl
+ * @clk: ptr to clock structure
+ * @drate: desired rate
+ * @rate: final rate will be returned in this variable only.
+ *
+ * Finds index in rate_config for highest clk rate which is less than
+ * requested rate. If there is no clk rate lesser than requested rate then
+ * -EINVAL is returned. This routine assumes that rate_config is written
+ * in incrementing order of clk rates.
+ * If drate passed is zero then default rate is programmed.
+ */
+static int
+round_rate_index(struct clk *clk, unsigned long drate, unsigned long *rate)
{
- unsigned int mask, i;
- unsigned long flags;
- struct pclk_info *info = NULL;
+ unsigned long tmp = 0, prev_rate = 0;
+ int index;
- spin_lock_irqsave(&clocks_lock, flags);
- mask = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift)
- & clk->pclk_sel->pclk_sel_mask;
+ if (!clk->calc_rate)
+ return -EFAULT;
- for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
- if (clk->pclk_sel->pclk_info[i].pclk_mask == mask)
- info = &clk->pclk_sel->pclk_info[i];
+ if (!drate)
+ return -EINVAL;
+
+ /*
+ * This loops ends on two conditions:
+ * - as soon as clk is found with rate greater than requested rate.
+ * - if all clks in rate_config are smaller than requested rate.
+ */
+ for (index = 0; index < clk->rate_config.count; index++) {
+ prev_rate = tmp;
+ tmp = clk->calc_rate(clk, index);
+ if (drate < tmp) {
+ index--;
+ break;
+ }
}
- spin_unlock_irqrestore(&clocks_lock, flags);
+ /* return if can't find suitable clock */
+ if (index < 0) {
+ index = -EINVAL;
+ *rate = 0;
+ } else if (index == clk->rate_config.count) {
+ /* program with highest clk rate possible */
+ index = clk->rate_config.count - 1;
+ *rate = tmp;
+ } else
+ *rate = prev_rate;
- return info;
+ return index;
}
-/*
- * Set pclk as cclk's parent and add clock sibling node to current parents
- * children list
+/**
+ * clk_round_rate - adjust a rate to the exact rate a clock can provide
+ * @clk: clock source
+ * @rate: desired clock rate in Hz
+ *
+ * Returns rounded clock rate in Hz, or negative errno.
*/
-static void change_parent(struct clk *cclk, struct clk *pclk)
+long clk_round_rate(struct clk *clk, unsigned long drate)
{
- unsigned long flags;
+ long rate = 0;
+ int index;
+
+ /*
+ * propagate call to parent who supports calc_rate. Similar approach is
+ * used in clk_set_rate.
+ */
+ if (!clk->calc_rate) {
+ u32 mult;
+ if (!clk->pclk)
+ return clk->rate;
+
+ mult = clk->div_factor ? clk->div_factor : 1;
+ return clk_round_rate(clk->pclk, mult * drate) / mult;
+ }
- spin_lock_irqsave(&clocks_lock, flags);
- list_del(&cclk->sibling);
- list_add(&cclk->sibling, &pclk->children);
+ index = round_rate_index(clk, drate, &rate);
+ if (index >= 0)
+ return rate;
+ else
+ return index;
+}
+EXPORT_SYMBOL(clk_round_rate);
- cclk->pclk = pclk;
- spin_unlock_irqrestore(&clocks_lock, flags);
+/*All below functions are called with lock held */
+
+/*
+ * Calculates pll clk rate for specific value of mode, m, n and p
+ *
+ * In normal mode
+ * rate = (2 * M[15:8] * Fin)/(N * 2^P)
+ *
+ * In Dithered mode
+ * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
+ */
+unsigned long pll_calc_rate(struct clk *clk, int index)
+{
+ unsigned long rate = clk->pclk->rate;
+ struct pll_rate_tbl *tbls = clk->rate_config.tbls;
+ unsigned int mode;
+
+ mode = tbls[index].mode ? 256 : 1;
+ return (((2 * rate / 10000) * tbls[index].m) /
+ (mode * tbls[index].n * (1 << tbls[index].p))) * 10000;
}
/*
@@ -283,47 +505,146 @@ static void change_parent(struct clk *cclk, struct clk *pclk)
* In Dithered mode
* rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
*/
-void pll1_clk_recalc(struct clk *clk)
+int pll_clk_recalc(struct clk *clk)
{
struct pll_clk_config *config = clk->private_data;
unsigned int num = 2, den = 0, val, mode = 0;
- unsigned long flags;
- spin_lock_irqsave(&clocks_lock, flags);
- mode = (readl(config->mode_reg) >> PLL_MODE_SHIFT) &
- PLL_MODE_MASK;
+ mode = (readl(config->mode_reg) >> config->masks->mode_shift) &
+ config->masks->mode_mask;
val = readl(config->cfg_reg);
/* calculate denominator */
- den = (val >> PLL_DIV_P_SHIFT) & PLL_DIV_P_MASK;
+ den = (val >> config->masks->div_p_shift) & config->masks->div_p_mask;
den = 1 << den;
- den *= (val >> PLL_DIV_N_SHIFT) & PLL_DIV_N_MASK;
+ den *= (val >> config->masks->div_n_shift) & config->masks->div_n_mask;
/* calculate numerator & denominator */
if (!mode) {
/* Normal mode */
- num *= (val >> PLL_NORM_FDBK_M_SHIFT) & PLL_NORM_FDBK_M_MASK;
+ num *= (val >> config->masks->norm_fdbk_m_shift) &
+ config->masks->norm_fdbk_m_mask;
} else {
/* Dithered mode */
- num *= (val >> PLL_DITH_FDBK_M_SHIFT) & PLL_DITH_FDBK_M_MASK;
+ num *= (val >> config->masks->dith_fdbk_m_shift) &
+ config->masks->dith_fdbk_m_mask;
den *= 256;
}
+ if (!den)
+ return -EINVAL;
+
clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
- spin_unlock_irqrestore(&clocks_lock, flags);
+ return 0;
+}
+
+/*
+ * Configures new clock rate of pll
+ */
+int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate)
+{
+ struct pll_rate_tbl *tbls = clk->rate_config.tbls;
+ struct pll_clk_config *config = clk->private_data;
+ unsigned long val, rate;
+ int i;
+
+ i = round_rate_index(clk, desired_rate, &rate);
+ if (i < 0)
+ return i;
+
+ val = readl(config->mode_reg) &
+ ~(config->masks->mode_mask << config->masks->mode_shift);
+ val |= (tbls[i].mode & config->masks->mode_mask) <<
+ config->masks->mode_shift;
+ writel(val, config->mode_reg);
+
+ val = readl(config->cfg_reg) &
+ ~(config->masks->div_p_mask << config->masks->div_p_shift);
+ val |= (tbls[i].p & config->masks->div_p_mask) <<
+ config->masks->div_p_shift;
+ val &= ~(config->masks->div_n_mask << config->masks->div_n_shift);
+ val |= (tbls[i].n & config->masks->div_n_mask) <<
+ config->masks->div_n_shift;
+ val &= ~(config->masks->dith_fdbk_m_mask <<
+ config->masks->dith_fdbk_m_shift);
+ if (tbls[i].mode)
+ val |= (tbls[i].m & config->masks->dith_fdbk_m_mask) <<
+ config->masks->dith_fdbk_m_shift;
+ else
+ val |= (tbls[i].m & config->masks->norm_fdbk_m_mask) <<
+ config->masks->norm_fdbk_m_shift;
+
+ writel(val, config->cfg_reg);
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+/*
+ * Calculates ahb, apb clk rate for specific value of div
+ */
+unsigned long bus_calc_rate(struct clk *clk, int index)
+{
+ unsigned long rate = clk->pclk->rate;
+ struct bus_rate_tbl *tbls = clk->rate_config.tbls;
+
+ return rate / (tbls[index].div + 1);
}
/* calculates current programmed rate of ahb or apb bus */
-void bus_clk_recalc(struct clk *clk)
+int bus_clk_recalc(struct clk *clk)
{
struct bus_clk_config *config = clk->private_data;
unsigned int div;
- unsigned long flags;
- spin_lock_irqsave(&clocks_lock, flags);
- div = ((readl(config->reg) >> config->shift) & config->mask) + 1;
+ div = ((readl(config->reg) >> config->masks->shift) &
+ config->masks->mask) + 1;
+
+ if (!div)
+ return -EINVAL;
+
clk->rate = (unsigned long)clk->pclk->rate / div;
- spin_unlock_irqrestore(&clocks_lock, flags);
+ return 0;
+}
+
+/* Configures new clock rate of AHB OR APB bus */
+int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate)
+{
+ struct bus_rate_tbl *tbls = clk->rate_config.tbls;
+ struct bus_clk_config *config = clk->private_data;
+ unsigned long val, rate;
+ int i;
+
+ i = round_rate_index(clk, desired_rate, &rate);
+ if (i < 0)
+ return i;
+
+ val = readl(config->reg) &
+ ~(config->masks->mask << config->masks->shift);
+ val |= (tbls[i].div & config->masks->mask) << config->masks->shift;
+ writel(val, config->reg);
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+/*
+ * gives rate for different values of eq, x and y
+ *
+ * Fout from synthesizer can be given from two equations:
+ * Fout1 = (Fin * X/Y)/2 EQ1
+ * Fout2 = Fin * X/Y EQ2
+ */
+unsigned long aux_calc_rate(struct clk *clk, int index)
+{
+ unsigned long rate = clk->pclk->rate;
+ struct aux_rate_tbl *tbls = clk->rate_config.tbls;
+ u8 eq = tbls[index].eq ? 1 : 2;
+
+ return (((rate/10000) * tbls[index].xscale) /
+ (tbls[index].yscale * eq)) * 10000;
}
/*
@@ -336,44 +657,76 @@ void bus_clk_recalc(struct clk *clk)
*
* Selection of eqn 1 or 2 is programmed in register
*/
-void aux_clk_recalc(struct clk *clk)
+int aux_clk_recalc(struct clk *clk)
{
struct aux_clk_config *config = clk->private_data;
- struct pclk_info *pclk_info = NULL;
unsigned int num = 1, den = 1, val, eqn;
- unsigned long flags;
- /* get current programmed parent */
- pclk_info = pclk_info_get(clk);
- if (!pclk_info) {
- spin_lock_irqsave(&clocks_lock, flags);
- clk->pclk = NULL;
- clk->rate = 0;
- spin_unlock_irqrestore(&clocks_lock, flags);
- return;
- }
+ val = readl(config->synth_reg);
- change_parent(clk, pclk_info->pclk);
+ eqn = (val >> config->masks->eq_sel_shift) &
+ config->masks->eq_sel_mask;
+ if (eqn == config->masks->eq1_mask)
+ den *= 2;
- spin_lock_irqsave(&clocks_lock, flags);
- if (pclk_info->scalable) {
- val = readl(config->synth_reg);
+ /* calculate numerator */
+ num = (val >> config->masks->xscale_sel_shift) &
+ config->masks->xscale_sel_mask;
- eqn = (val >> AUX_EQ_SEL_SHIFT) & AUX_EQ_SEL_MASK;
- if (eqn == AUX_EQ1_SEL)
- den *= 2;
+ /* calculate denominator */
+ den *= (val >> config->masks->yscale_sel_shift) &
+ config->masks->yscale_sel_mask;
- /* calculate numerator */
- num = (val >> AUX_XSCALE_SHIFT) & AUX_XSCALE_MASK;
+ if (!den)
+ return -EINVAL;
- /* calculate denominator */
- den *= (val >> AUX_YSCALE_SHIFT) & AUX_YSCALE_MASK;
- val = (((clk->pclk->rate/10000) * num) / den) * 10000;
- } else
- val = clk->pclk->rate;
+ clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
+ return 0;
+}
- clk->rate = val;
- spin_unlock_irqrestore(&clocks_lock, flags);
+/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
+int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate)
+{
+ struct aux_rate_tbl *tbls = clk->rate_config.tbls;
+ struct aux_clk_config *config = clk->private_data;
+ unsigned long val, rate;
+ int i;
+
+ i = round_rate_index(clk, desired_rate, &rate);
+ if (i < 0)
+ return i;
+
+ val = readl(config->synth_reg) &
+ ~(config->masks->eq_sel_mask << config->masks->eq_sel_shift);
+ val |= (tbls[i].eq & config->masks->eq_sel_mask) <<
+ config->masks->eq_sel_shift;
+ val &= ~(config->masks->xscale_sel_mask <<
+ config->masks->xscale_sel_shift);
+ val |= (tbls[i].xscale & config->masks->xscale_sel_mask) <<
+ config->masks->xscale_sel_shift;
+ val &= ~(config->masks->yscale_sel_mask <<
+ config->masks->yscale_sel_shift);
+ val |= (tbls[i].yscale & config->masks->yscale_sel_mask) <<
+ config->masks->yscale_sel_shift;
+ writel(val, config->synth_reg);
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+/*
+ * Calculates gpt clk rate for different values of mscale and nscale
+ *
+ * Fout= Fin/((2 ^ (N+1)) * (M+1))
+ */
+unsigned long gpt_calc_rate(struct clk *clk, int index)
+{
+ unsigned long rate = clk->pclk->rate;
+ struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
+
+ return rate / ((1 << (tbls[index].nscale + 1)) *
+ (tbls[index].mscale + 1));
}
/*
@@ -381,46 +734,142 @@ void aux_clk_recalc(struct clk *clk)
* Fout from synthesizer can be given from below equations:
* Fout= Fin/((2 ^ (N+1)) * (M+1))
*/
-void gpt_clk_recalc(struct clk *clk)
+int gpt_clk_recalc(struct clk *clk)
{
- struct aux_clk_config *config = clk->private_data;
- struct pclk_info *pclk_info = NULL;
+ struct gpt_clk_config *config = clk->private_data;
unsigned int div = 1, val;
- unsigned long flags;
- pclk_info = pclk_info_get(clk);
- if (!pclk_info) {
- spin_lock_irqsave(&clocks_lock, flags);
- clk->pclk = NULL;
- clk->rate = 0;
- spin_unlock_irqrestore(&clocks_lock, flags);
- return;
- }
-
- change_parent(clk, pclk_info->pclk);
+ val = readl(config->synth_reg);
+ div += (val >> config->masks->mscale_sel_shift) &
+ config->masks->mscale_sel_mask;
+ div *= 1 << (((val >> config->masks->nscale_sel_shift) &
+ config->masks->nscale_sel_mask) + 1);
- spin_lock_irqsave(&clocks_lock, flags);
- if (pclk_info->scalable) {
- val = readl(config->synth_reg);
- div += (val >> GPT_MSCALE_SHIFT) & GPT_MSCALE_MASK;
- div *= 1 << (((val >> GPT_NSCALE_SHIFT) & GPT_NSCALE_MASK) + 1);
- }
+ if (!div)
+ return -EINVAL;
clk->rate = (unsigned long)clk->pclk->rate / div;
- spin_unlock_irqrestore(&clocks_lock, flags);
+ return 0;
+}
+
+/* Configures new clock rate of gptiliary synthesizers used by: UART, FIRDA*/
+int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate)
+{
+ struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
+ struct gpt_clk_config *config = clk->private_data;
+ unsigned long val, rate;
+ int i;
+
+ i = round_rate_index(clk, desired_rate, &rate);
+ if (i < 0)
+ return i;
+
+ val = readl(config->synth_reg) & ~(config->masks->mscale_sel_mask <<
+ config->masks->mscale_sel_shift);
+ val |= (tbls[i].mscale & config->masks->mscale_sel_mask) <<
+ config->masks->mscale_sel_shift;
+ val &= ~(config->masks->nscale_sel_mask <<
+ config->masks->nscale_sel_shift);
+ val |= (tbls[i].nscale & config->masks->nscale_sel_mask) <<
+ config->masks->nscale_sel_shift;
+ writel(val, config->synth_reg);
+
+ clk->rate = rate;
+
+ return 0;
}
/*
- * Used for clocks that always have same value as the parent clock divided by a
+ * Calculates clcd clk rate for different values of div
+ *
+ * Fout from synthesizer can be given from below equation:
+ * Fout= Fin/2*div (division factor)
+ * div is 17 bits:-
+ * 0-13 (fractional part)
+ * 14-16 (integer part)
+ * To calculate Fout we left shift val by 14 bits and divide Fin by
+ * complete div (including fractional part) and then right shift the
+ * result by 14 places.
+ */
+unsigned long clcd_calc_rate(struct clk *clk, int index)
+{
+ unsigned long rate = clk->pclk->rate;
+ struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
+
+ rate /= 1000;
+ rate <<= 12;
+ rate /= (2 * tbls[index].div);
+ rate >>= 12;
+ rate *= 1000;
+
+ return rate;
+}
+
+/*
+ * calculates current programmed rate of clcd synthesizer
+ * Fout from synthesizer can be given from below equation:
+ * Fout= Fin/2*div (division factor)
+ * div is 17 bits:-
+ * 0-13 (fractional part)
+ * 14-16 (integer part)
+ * To calculate Fout we left shift val by 14 bits and divide Fin by
+ * complete div (including fractional part) and then right shift the
+ * result by 14 places.
+ */
+int clcd_clk_recalc(struct clk *clk)
+{
+ struct clcd_clk_config *config = clk->private_data;
+ unsigned int div = 1;
+ unsigned long prate;
+ unsigned int val;
+
+ val = readl(config->synth_reg);
+ div = (val >> config->masks->div_factor_shift) &
+ config->masks->div_factor_mask;
+
+ if (!div)
+ return -EINVAL;
+
+ prate = clk->pclk->rate / 1000; /* first level division, make it KHz */
+
+ clk->rate = (((unsigned long)prate << 12) / (2 * div)) >> 12;
+ clk->rate *= 1000;
+ return 0;
+}
+
+/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
+int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate)
+{
+ struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
+ struct clcd_clk_config *config = clk->private_data;
+ unsigned long val, rate;
+ int i;
+
+ i = round_rate_index(clk, desired_rate, &rate);
+ if (i < 0)
+ return i;
+
+ val = readl(config->synth_reg) & ~(config->masks->div_factor_mask <<
+ config->masks->div_factor_shift);
+ val |= (tbls[i].div & config->masks->div_factor_mask) <<
+ config->masks->div_factor_shift;
+ writel(val, config->synth_reg);
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+/*
+ * Used for clocks that always have value as the parent clock divided by a
* fixed divisor
*/
-void follow_parent(struct clk *clk)
+int follow_parent(struct clk *clk)
{
- unsigned long flags;
+ unsigned int div_factor = (clk->div_factor < 1) ? 1 : clk->div_factor;
- spin_lock_irqsave(&clocks_lock, flags);
- clk->rate = clk->pclk->rate;
- spin_unlock_irqrestore(&clocks_lock, flags);
+ clk->rate = clk->pclk->rate/div_factor;
+ return 0;
}
/**
@@ -431,5 +880,124 @@ void follow_parent(struct clk *clk)
*/
void recalc_root_clocks(void)
{
- propagate_rate(&root_clks);
+ struct clk *pclk;
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ list_for_each_entry(pclk, &root_clks, sibling) {
+ if (pclk->recalc) {
+ ret = pclk->recalc(pclk);
+ /*
+ * recalc will return error if clk out is not programmed
+ * In this case configure default clock.
+ */
+ if (ret && pclk->set_rate)
+ pclk->set_rate(pclk, 0);
+ }
+ propagate_rate(pclk, 1);
+ /* Enable clks enabled on init, in software view */
+ if (pclk->flags & ENABLED_ON_INIT)
+ do_clk_enable(pclk);
+ }
+ spin_unlock_irqrestore(&clocks_lock, flags);
+}
+
+#ifdef CONFIG_DEBUG_FS
+/*
+ * debugfs support to trace clock tree hierarchy and attributes
+ */
+static struct dentry *clk_debugfs_root;
+static int clk_debugfs_register_one(struct clk *c)
+{
+ int err;
+ struct dentry *d, *child;
+ struct clk *pa = c->pclk;
+ char s[255];
+ char *p = s;
+
+ if (c) {
+ if (c->cl->con_id)
+ p += sprintf(p, "%s", c->cl->con_id);
+ if (c->cl->dev_id)
+ p += sprintf(p, "%s", c->cl->dev_id);
+ }
+ d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root);
+ if (!d)
+ return -ENOMEM;
+ c->dent = d;
+
+ d = debugfs_create_u32("usage_count", S_IRUGO, c->dent,
+ (u32 *)&c->usage_count);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ return 0;
+
+err_out:
+ d = c->dent;
+ list_for_each_entry(child, &d->d_subdirs, d_u.d_child)
+ debugfs_remove(child);
+ debugfs_remove(c->dent);
+ return err;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+ int err;
+ struct clk *pa = c->pclk;
+
+ if (pa && !pa->dent) {
+ err = clk_debugfs_register(pa);
+ if (err)
+ return err;
+ }
+
+ if (!c->dent) {
+ err = clk_debugfs_register_one(c);
+ if (err)
+ return err;
+ }
+ return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+ struct clk *c;
+ struct dentry *d;
+ int err;
+
+ d = debugfs_create_dir("clock", NULL);
+ if (!d)
+ return -ENOMEM;
+ clk_debugfs_root = d;
+
+ list_for_each_entry(c, &clocks, node) {
+ err = clk_debugfs_register(c);
+ if (err)
+ goto err_out;
+ }
+ return 0;
+err_out:
+ debugfs_remove_recursive(clk_debugfs_root);
+ return err;
+}
+late_initcall(clk_debugfs_init);
+
+static int clk_debugfs_reparent(struct clk *c)
+{
+ debugfs_remove(c->dent);
+ return clk_debugfs_register_one(c);
}
+#endif /* CONFIG_DEBUG_FS */
diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h
index 2572260f990..2ae6606930a 100644
--- a/arch/arm/plat-spear/include/plat/clock.h
+++ b/arch/arm/plat-spear/include/plat/clock.h
@@ -21,6 +21,7 @@
/* clk structure flags */
#define ALWAYS_ENABLED (1 << 0) /* clock always enabled */
#define RESET_TO_ENABLE (1 << 1) /* reset register bit to enable clk */
+#define ENABLED_ON_INIT (1 << 2) /* clocks enabled at init */
/**
* struct clkops - clock operations
@@ -35,13 +36,11 @@ struct clkops {
/**
* struct pclk_info - parents info
* @pclk: pointer to parent clk
- * @pclk_mask: value to be written for selecting this parent
- * @scalable: Is parent scalable (1 - YES, 0 - NO)
+ * @pclk_val: value to be written for selecting this parent
*/
struct pclk_info {
struct clk *pclk;
- u8 pclk_mask;
- u8 scalable;
+ u8 pclk_val;
};
/**
@@ -54,11 +53,23 @@ struct pclk_info {
struct pclk_sel {
struct pclk_info *pclk_info;
u8 pclk_count;
- unsigned int *pclk_sel_reg;
+ void __iomem *pclk_sel_reg;
unsigned int pclk_sel_mask;
};
/**
+ * struct rate_config - clk rate configurations
+ * @tbls: array of device specific clk rate tables, in ascending order of rates
+ * @count: size of tbls array
+ * @default_index: default setting when originally disabled
+ */
+struct rate_config {
+ void *tbls;
+ u8 count;
+ u8 default_index;
+};
+
+/**
* struct clk - clock structure
* @usage_count: num of users who enabled this clock
* @flags: flags for clock properties
@@ -67,21 +78,32 @@ struct pclk_sel {
* @en_reg_bit: clk enable/disable bit
* @ops: clk enable/disable ops - generic_clkops selected if NULL
* @recalc: pointer to clock rate recalculate function
+ * @set_rate: pointer to clock set rate function
+ * @calc_rate: pointer to clock get rate function for index
+ * @rate_config: rate configuration information, used by set_rate
+ * @div_factor: division factor to parent clock.
* @pclk: current parent clk
* @pclk_sel: pointer to parent selection structure
* @pclk_sel_shift: register shift for selecting parent of this clock
* @children: list for childrens or this clock
* @sibling: node for list of clocks having same parents
* @private_data: clock specific private data
+ * @node: list to maintain clocks linearly
+ * @cl: clocklook up assoicated with this clock
+ * @dent: object for debugfs
*/
struct clk {
unsigned int usage_count;
unsigned int flags;
unsigned long rate;
- unsigned int *en_reg;
+ void __iomem *en_reg;
u8 en_reg_bit;
const struct clkops *ops;
- void (*recalc) (struct clk *);
+ int (*recalc) (struct clk *);
+ int (*set_rate) (struct clk *, unsigned long rate);
+ unsigned long (*calc_rate)(struct clk *, int index);
+ struct rate_config rate_config;
+ unsigned int div_factor;
struct clk *pclk;
struct pclk_sel *pclk_sel;
@@ -90,37 +112,137 @@ struct clk {
struct list_head children;
struct list_head sibling;
void *private_data;
+#ifdef CONFIG_DEBUG_FS
+ struct list_head node;
+ struct clk_lookup *cl;
+ struct dentry *dent;
+#endif
};
/* pll configuration structure */
+struct pll_clk_masks {
+ u32 mode_mask;
+ u32 mode_shift;
+
+ u32 norm_fdbk_m_mask;
+ u32 norm_fdbk_m_shift;
+ u32 dith_fdbk_m_mask;
+ u32 dith_fdbk_m_shift;
+ u32 div_p_mask;
+ u32 div_p_shift;
+ u32 div_n_mask;
+ u32 div_n_shift;
+};
+
struct pll_clk_config {
- unsigned int *mode_reg;
- unsigned int *cfg_reg;
+ void __iomem *mode_reg;
+ void __iomem *cfg_reg;
+ struct pll_clk_masks *masks;
+};
+
+/* pll clk rate config structure */
+struct pll_rate_tbl {
+ u8 mode;
+ u16 m;
+ u8 n;
+ u8 p;
};
/* ahb and apb bus configuration structure */
+struct bus_clk_masks {
+ u32 mask;
+ u32 shift;
+};
+
struct bus_clk_config {
- unsigned int *reg;
- unsigned int mask;
- unsigned int shift;
+ void __iomem *reg;
+ struct bus_clk_masks *masks;
+};
+
+/* ahb and apb clk bus rate config structure */
+struct bus_rate_tbl {
+ u8 div;
+};
+
+/* Aux clk configuration structure: applicable to UART and FIRDA */
+struct aux_clk_masks {
+ u32 eq_sel_mask;
+ u32 eq_sel_shift;
+ u32 eq1_mask;
+ u32 eq2_mask;
+ u32 xscale_sel_mask;
+ u32 xscale_sel_shift;
+ u32 yscale_sel_mask;
+ u32 yscale_sel_shift;
};
-/*
- * Aux clk configuration structure: applicable to GPT, UART and FIRDA
- */
struct aux_clk_config {
- unsigned int *synth_reg;
+ void __iomem *synth_reg;
+ struct aux_clk_masks *masks;
+};
+
+/* aux clk rate config structure */
+struct aux_rate_tbl {
+ u16 xscale;
+ u16 yscale;
+ u8 eq;
+};
+
+/* GPT clk configuration structure */
+struct gpt_clk_masks {
+ u32 mscale_sel_mask;
+ u32 mscale_sel_shift;
+ u32 nscale_sel_mask;
+ u32 nscale_sel_shift;
+};
+
+struct gpt_clk_config {
+ void __iomem *synth_reg;
+ struct gpt_clk_masks *masks;
+};
+
+/* gpt clk rate config structure */
+struct gpt_rate_tbl {
+ u16 mscale;
+ u16 nscale;
+};
+
+/* clcd clk configuration structure */
+struct clcd_synth_masks {
+ u32 div_factor_mask;
+ u32 div_factor_shift;
+};
+
+struct clcd_clk_config {
+ void __iomem *synth_reg;
+ struct clcd_synth_masks *masks;
+};
+
+/* clcd clk rate config structure */
+struct clcd_rate_tbl {
+ u16 div;
};
/* platform specific clock functions */
void clk_register(struct clk_lookup *cl);
void recalc_root_clocks(void);
-/* clock recalc functions */
-void follow_parent(struct clk *clk);
-void pll1_clk_recalc(struct clk *clk);
-void bus_clk_recalc(struct clk *clk);
-void gpt_clk_recalc(struct clk *clk);
-void aux_clk_recalc(struct clk *clk);
+/* clock recalc & set rate functions */
+int follow_parent(struct clk *clk);
+unsigned long pll_calc_rate(struct clk *clk, int index);
+int pll_clk_recalc(struct clk *clk);
+int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate);
+unsigned long bus_calc_rate(struct clk *clk, int index);
+int bus_clk_recalc(struct clk *clk);
+int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate);
+unsigned long gpt_calc_rate(struct clk *clk, int index);
+int gpt_clk_recalc(struct clk *clk);
+int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate);
+unsigned long aux_calc_rate(struct clk *clk, int index);
+int aux_clk_recalc(struct clk *clk);
+int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate);
+unsigned long clcd_calc_rate(struct clk *clk, int index);
+int clcd_clk_recalc(struct clk *clk);
+int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate);
#endif /* __PLAT_CLOCK_H */
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index e91270e4f64..8501bbf2c09 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -12,7 +12,7 @@
*/
#include <linux/amba/serial.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
.macro addruart, rp, rv
mov \rp, #SPEAR_DBG_UART_BASE @ Physical base
diff --git a/arch/arm/plat-spear/include/plat/hardware.h b/arch/arm/plat-spear/include/plat/hardware.h
new file mode 100644
index 00000000000..66d677225d1
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/hardware.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/plat-spear/include/plat/hardware.h
+ *
+ * Hardware definitions for SPEAr
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_HARDWARE_H
+#define __PLAT_HARDWARE_H
+
+#ifndef __ASSEMBLY__
+#define IOMEM(x) ((void __iomem __force *)(x))
+#else
+#define IOMEM(x) (x)
+#endif
+
+#endif /* __PLAT_HARDWARE_H */
diff --git a/arch/arm/plat-spear/include/plat/system.h b/arch/arm/plat-spear/include/plat/system.h
index 55a4e405d57..a235fa0ca77 100644
--- a/arch/arm/plat-spear/include/plat/system.h
+++ b/arch/arm/plat-spear/include/plat/system.h
@@ -14,9 +14,9 @@
#ifndef __PLAT_SYSTEM_H
#define __PLAT_SYSTEM_H
-#include <asm/hardware/sp810.h>
#include <linux/io.h>
-#include <mach/spear.h>
+#include <asm/hardware/sp810.h>
+#include <mach/hardware.h>
static inline void arch_idle(void)
{
diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h
index 99ba6789cc9..1bf84527aee 100644
--- a/arch/arm/plat-spear/include/plat/uncompress.h
+++ b/arch/arm/plat-spear/include/plat/uncompress.h
@@ -13,7 +13,7 @@
#include <linux/io.h>
#include <linux/amba/serial.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
#ifndef __PLAT_UNCOMPRESS_H
#define __PLAT_UNCOMPRESS_H
@@ -24,10 +24,10 @@ static inline void putc(int c)
{
void __iomem *base = (void __iomem *)SPEAR_DBG_UART_BASE;
- while (readl(base + UART01x_FR) & UART01x_FR_TXFF)
+ while (readl_relaxed(base + UART01x_FR) & UART01x_FR_TXFF)
barrier();
- writel(c, base + UART01x_DR);
+ writel_relaxed(c, base + UART01x_DR);
}
static inline void flush(void)
diff --git a/arch/arm/plat-spear/include/plat/vmalloc.h b/arch/arm/plat-spear/include/plat/vmalloc.h
index 09e9372aea2..8c8b24d0704 100644
--- a/arch/arm/plat-spear/include/plat/vmalloc.h
+++ b/arch/arm/plat-spear/include/plat/vmalloc.h
@@ -14,6 +14,6 @@
#ifndef __PLAT_VMALLOC_H
#define __PLAT_VMALLOC_H
-#define VMALLOC_END 0xF0000000
+#define VMALLOC_END 0xF0000000UL
#endif /* __PLAT_VMALLOC_H */
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index 839c88df999..dbb6e4fff79 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -1,7 +1,7 @@
/*
* arch/arm/plat-spear/time.c
*
- * Copyright (C) 2009 ST Microelectronics
+ * Copyright (C) 2010 ST Microelectronics
* Shiraz Hashim<shiraz.hashim@st.com>
*
* This file is licensed under the terms of the GNU General Public
@@ -20,10 +20,9 @@
#include <linux/time.h>
#include <linux/irq.h>
#include <asm/mach/time.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/spear.h>
#include <mach/generic.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
/*
* We would use TIMER0 and TIMER1 as clockevent and clocksource.
@@ -211,7 +210,7 @@ static void __init spear_clockevent_init(void)
void __init spear_setup_timer(void)
{
- struct clk *pll3_clk;
+ int ret;
if (!request_mem_region(SPEAR_GPT0_BASE, SZ_1K, "gpt0")) {
pr_err("%s:cannot get IO addr\n", __func__);
@@ -230,26 +229,21 @@ void __init spear_setup_timer(void)
goto err_iomap;
}
- pll3_clk = clk_get(NULL, "pll3_48m_clk");
- if (!pll3_clk) {
- pr_err("%s:couldn't get PLL3 as parent for gpt\n", __func__);
- goto err_iomap;
+ ret = clk_enable(gpt_clk);
+ if (ret < 0) {
+ pr_err("%s:couldn't enable gpt clock\n", __func__);
+ goto err_clk;
}
- clk_set_parent(gpt_clk, pll3_clk);
-
spear_clockevent_init();
spear_clocksource_init();
return;
+err_clk:
+ clk_put(gpt_clk);
err_iomap:
iounmap(gpt_base);
-
err_mem:
release_mem_region(SPEAR_GPT0_BASE, SZ_1K);
}
-
-struct sys_timer spear_sys_timer = {
- .init = spear_setup_timer,
-};
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 2fea897ebeb..9d6feaabbe7 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Sun Dec 12 23:24:27 2010
+# Last update: Mon Feb 7 08:59:27 2011
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -2240,7 +2240,7 @@ arm_ultimator2 MACH_ARM_ULTIMATOR2 ARM_ULTIMATOR2 2250
vs_v210 MACH_VS_V210 VS_V210 2252
vs_v212 MACH_VS_V212 VS_V212 2253
hmt MACH_HMT HMT 2254
-suen3 MACH_SUEN3 SUEN3 2255
+km_kirkwood MACH_KM_KIRKWOOD KM_KIRKWOOD 2255
vesper MACH_VESPER VESPER 2256
str9 MACH_STR9 STR9 2257
omap3_wl_ff MACH_OMAP3_WL_FF OMAP3_WL_FF 2258
@@ -2987,7 +2987,7 @@ pxwnas_500_1000 MACH_PXWNAS_500_1000 PXWNAS_500_1000 3001
ea20 MACH_EA20 EA20 3002
awm2 MACH_AWM2 AWM2 3003
ti8148evm MACH_TI8148EVM TI8148EVM 3004
-tegra_seaboard MACH_TEGRA_SEABOARD TEGRA_SEABOARD 3005
+seaboard MACH_SEABOARD SEABOARD 3005
linkstation_chlv2 MACH_LINKSTATION_CHLV2 LINKSTATION_CHLV2 3006
tera_pro2_rack MACH_TERA_PRO2_RACK TERA_PRO2_RACK 3007
rubys MACH_RUBYS RUBYS 3008
@@ -3190,7 +3190,7 @@ synergy MACH_SYNERGY SYNERGY 3205
ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206
wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207
punica MACH_PUNICA PUNICA 3208
-sbc_nt250 MACH_SBC_NT250 SBC_NT250 3209
+trimslice MACH_TRIMSLICE TRIMSLICE 3209
mx27_wmultra MACH_MX27_WMULTRA MX27_WMULTRA 3210
mackerel MACH_MACKEREL MACKEREL 3211
fa9x27 MACH_FA9X27 FA9X27 3213
@@ -3219,3 +3219,100 @@ pivicc MACH_PIVICC PIVICC 3235
pcm048 MACH_PCM048 PCM048 3236
dds MACH_DDS DDS 3237
chalten_xa1 MACH_CHALTEN_XA1 CHALTEN_XA1 3238
+ts48xx MACH_TS48XX TS48XX 3239
+tonga2_tfttimer MACH_TONGA2_TFTTIMER TONGA2_TFTTIMER 3240
+whistler MACH_WHISTLER WHISTLER 3241
+asl_phoenix MACH_ASL_PHOENIX ASL_PHOENIX 3242
+at91sam9263otlite MACH_AT91SAM9263OTLITE AT91SAM9263OTLITE 3243
+ddplug MACH_DDPLUG DDPLUG 3244
+d2plug MACH_D2PLUG D2PLUG 3245
+kzm9d MACH_KZM9D KZM9D 3246
+verdi_lte MACH_VERDI_LTE VERDI_LTE 3247
+nanozoom MACH_NANOZOOM NANOZOOM 3248
+dm3730_som_lv MACH_DM3730_SOM_LV DM3730_SOM_LV 3249
+dm3730_torpedo MACH_DM3730_TORPEDO DM3730_TORPEDO 3250
+anchovy MACH_ANCHOVY ANCHOVY 3251
+re2rev20 MACH_RE2REV20 RE2REV20 3253
+re2rev21 MACH_RE2REV21 RE2REV21 3254
+cns21xx MACH_CNS21XX CNS21XX 3255
+rider MACH_RIDER RIDER 3257
+nsk330 MACH_NSK330 NSK330 3258
+cns2133evb MACH_CNS2133EVB CNS2133EVB 3259
+z3_816x_mod MACH_Z3_816X_MOD Z3_816X_MOD 3260
+z3_814x_mod MACH_Z3_814X_MOD Z3_814X_MOD 3261
+beect MACH_BEECT BEECT 3262
+dma_thunderbug MACH_DMA_THUNDERBUG DMA_THUNDERBUG 3263
+omn_at91sam9g20 MACH_OMN_AT91SAM9G20 OMN_AT91SAM9G20 3264
+mx25_e2s_uc MACH_MX25_E2S_UC MX25_E2S_UC 3265
+mione MACH_MIONE MIONE 3266
+top9000_tcu MACH_TOP9000_TCU TOP9000_TCU 3267
+top9000_bsl MACH_TOP9000_BSL TOP9000_BSL 3268
+kingdom MACH_KINGDOM KINGDOM 3269
+armadillo460 MACH_ARMADILLO460 ARMADILLO460 3270
+lq2 MACH_LQ2 LQ2 3271
+sweda_tms2 MACH_SWEDA_TMS2 SWEDA_TMS2 3272
+mx53_loco MACH_MX53_LOCO MX53_LOCO 3273
+acer_a8 MACH_ACER_A8 ACER_A8 3275
+acer_gauguin MACH_ACER_GAUGUIN ACER_GAUGUIN 3276
+guppy MACH_GUPPY GUPPY 3277
+mx61_ard MACH_MX61_ARD MX61_ARD 3278
+tx53 MACH_TX53 TX53 3279
+omapl138_case_a3 MACH_OMAPL138_CASE_A3 OMAPL138_CASE_A3 3280
+uemd MACH_UEMD UEMD 3281
+ccwmx51mut MACH_CCWMX51MUT CCWMX51MUT 3282
+rockhopper MACH_ROCKHOPPER ROCKHOPPER 3283
+nookcolor MACH_NOOKCOLOR NOOKCOLOR 3284
+hkdkc100 MACH_HKDKC100 HKDKC100 3285
+ts42xx MACH_TS42XX TS42XX 3286
+aebl MACH_AEBL AEBL 3287
+wario MACH_WARIO WARIO 3288
+gfs_spm MACH_GFS_SPM GFS_SPM 3289
+cm_t3730 MACH_CM_T3730 CM_T3730 3290
+isc3 MACH_ISC3 ISC3 3291
+rascal MACH_RASCAL RASCAL 3292
+hrefv60 MACH_HREFV60 HREFV60 3293
+tpt_2_0 MACH_TPT_2_0 TPT_2_0 3294
+pyramid_td MACH_PYRAMID_TD PYRAMID_TD 3295
+splendor MACH_SPLENDOR SPLENDOR 3296
+guf_planet MACH_GUF_PLANET GUF_PLANET 3297
+msm8x60_qt MACH_MSM8X60_QT MSM8X60_QT 3298
+htc_hd_mini MACH_HTC_HD_MINI HTC_HD_MINI 3299
+athene MACH_ATHENE ATHENE 3300
+deep_r_ek_1 MACH_DEEP_R_EK_1 DEEP_R_EK_1 3301
+vivow_ct MACH_VIVOW_CT VIVOW_CT 3302
+nery_1000 MACH_NERY_1000 NERY_1000 3303
+rfl109145_ssrv MACH_RFL109145_SSRV RFL109145_SSRV 3304
+nmh MACH_NMH NMH 3305
+wn802t MACH_WN802T WN802T 3306
+dragonet MACH_DRAGONET DRAGONET 3307
+geneva_b MACH_GENEVA_B GENEVA_B 3308
+at91sam9263desk16l MACH_AT91SAM9263DESK16L AT91SAM9263DESK16L 3309
+bcmhana_sv MACH_BCMHANA_SV BCMHANA_SV 3310
+bcmhana_tablet MACH_BCMHANA_TABLET BCMHANA_TABLET 3311
+koi MACH_KOI KOI 3312
+ts4800 MACH_TS4800 TS4800 3313
+tqma9263 MACH_TQMA9263 TQMA9263 3314
+holiday MACH_HOLIDAY HOLIDAY 3315
+dma_6410 MACH_DMA6410 DMA6410 3316
+pcats_overlay MACH_PCATS_OVERLAY PCATS_OVERLAY 3317
+hwgw6410 MACH_HWGW6410 HWGW6410 3318
+shenzhou MACH_SHENZHOU SHENZHOU 3319
+cwme9210 MACH_CWME9210 CWME9210 3320
+cwme9210js MACH_CWME9210JS CWME9210JS 3321
+pgs_v1 MACH_PGS_SITARA PGS_SITARA 3322
+colibri_tegra2 MACH_COLIBRI_TEGRA2 COLIBRI_TEGRA2 3323
+w21 MACH_W21 W21 3324
+polysat1 MACH_POLYSAT1 POLYSAT1 3325
+dataway MACH_DATAWAY DATAWAY 3326
+cobral138 MACH_COBRAL138 COBRAL138 3327
+roverpcs8 MACH_ROVERPCS8 ROVERPCS8 3328
+marvelc MACH_MARVELC MARVELC 3329
+navefihid MACH_NAVEFIHID NAVEFIHID 3330
+dm365_cv100 MACH_DM365_CV100 DM365_CV100 3331
+able MACH_ABLE ABLE 3332
+legacy MACH_LEGACY LEGACY 3333
+icong MACH_ICONG ICONG 3334
+rover_g8 MACH_ROVER_G8 ROVER_G8 3335
+t5388p MACH_T5388P T5388P 3336
+dingo MACH_DINGO DINGO 3337
+goflexhome MACH_GOFLEXHOME GOFLEXHOME 3338
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 0797cb528b4..bbf3da012af 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -153,7 +153,7 @@ static struct notifier_block vfp_notifier_block = {
* Raise a SIGFPE for the current process.
* sicode describes the signal being raised.
*/
-void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs)
+static void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs)
{
siginfo_t info;
@@ -489,8 +489,11 @@ void vfp_flush_hwstate(struct thread_info *thread)
/*
* VFP hardware can lose all context when a CPU goes offline.
- * Safely clear our held state when a CPU has been killed, and
- * re-enable access to VFP when the CPU comes back online.
+ * As we will be running in SMP mode with CPU hotplug, we will save the
+ * hardware state at every thread switch. We clear our held state when
+ * a CPU has been killed, indicating that the VFP hardware doesn't contain
+ * a threads VFP state. When a CPU starts up, we re-enable access to the
+ * VFP hardware.
*
* Both CPU_DYING and CPU_STARTING are called on the CPU which
* is being offlined/onlined.
diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h
index 1ff9f1468c0..7dbc664eab1 100644
--- a/arch/blackfin/include/asm/bfin_serial.h
+++ b/arch/blackfin/include/asm/bfin_serial.h
@@ -10,6 +10,7 @@
#define __BFIN_ASM_SERIAL_H__
#include <linux/serial_core.h>
+#include <linux/spinlock.h>
#include <mach/anomaly.h>
#include <mach/bfin_serial.h>
@@ -41,6 +42,7 @@ struct bfin_serial_port {
struct circ_buf rx_dma_buf;
struct timer_list rx_dma_timer;
int rx_dma_nrows;
+ spinlock_t rx_lock;
unsigned int tx_dma_channel;
unsigned int rx_dma_channel;
struct work_struct tx_dma_workqueue;
diff --git a/arch/blackfin/lib/outs.S b/arch/blackfin/lib/outs.S
index 250f4d4b943..06a5e674401 100644
--- a/arch/blackfin/lib/outs.S
+++ b/arch/blackfin/lib/outs.S
@@ -13,6 +13,8 @@
.align 2
ENTRY(_outsl)
+ CC = R2 == 0;
+ IF CC JUMP 1f;
P0 = R0; /* P0 = port */
P1 = R1; /* P1 = address */
P2 = R2; /* P2 = count */
@@ -20,10 +22,12 @@ ENTRY(_outsl)
LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2;
.Llong_loop_s: R0 = [P1++];
.Llong_loop_e: [P0] = R0;
- RTS;
+1: RTS;
ENDPROC(_outsl)
ENTRY(_outsw)
+ CC = R2 == 0;
+ IF CC JUMP 1f;
P0 = R0; /* P0 = port */
P1 = R1; /* P1 = address */
P2 = R2; /* P2 = count */
@@ -31,10 +35,12 @@ ENTRY(_outsw)
LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2;
.Lword_loop_s: R0 = W[P1++];
.Lword_loop_e: W[P0] = R0;
- RTS;
+1: RTS;
ENDPROC(_outsw)
ENTRY(_outsb)
+ CC = R2 == 0;
+ IF CC JUMP 1f;
P0 = R0; /* P0 = port */
P1 = R1; /* P1 = address */
P2 = R2; /* P2 = count */
@@ -42,10 +48,12 @@ ENTRY(_outsb)
LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2;
.Lbyte_loop_s: R0 = B[P1++];
.Lbyte_loop_e: B[P0] = R0;
- RTS;
+1: RTS;
ENDPROC(_outsb)
ENTRY(_outsw_8)
+ CC = R2 == 0;
+ IF CC JUMP 1f;
P0 = R0; /* P0 = port */
P1 = R1; /* P1 = address */
P2 = R2; /* P2 = count */
@@ -56,5 +64,5 @@ ENTRY(_outsw_8)
R0 = R0 << 8;
R0 = R0 + R1;
.Lword8_loop_e: W[P0] = R0;
- RTS;
+1: RTS;
ENDPROC(_outsw_8)
diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S
index 790c767ca95..ab4a925a443 100644
--- a/arch/blackfin/mach-common/cache.S
+++ b/arch/blackfin/mach-common/cache.S
@@ -58,6 +58,8 @@
1:
.ifeqs "\flushins", BROK_FLUSH_INST
\flushins [P0++];
+ nop;
+ nop;
2: nop;
.else
2: \flushins [P0++];
diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S
index 442218980db..c49be845f96 100644
--- a/arch/cris/kernel/vmlinux.lds.S
+++ b/arch/cris/kernel/vmlinux.lds.S
@@ -72,11 +72,6 @@ SECTIONS
INIT_TEXT_SECTION(PAGE_SIZE)
.init.data : { INIT_DATA }
.init.setup : { INIT_SETUP(16) }
-#ifdef CONFIG_ETRAX_ARCH_V32
- __start___param = .;
- __param : { *(__param) }
- __stop___param = .;
-#endif
.initcall.init : {
INIT_CALLS
}
diff --git a/arch/m32r/kernel/irq.c b/arch/m32r/kernel/irq.c
index f745c1287f3..76eaf3883fb 100644
--- a/arch/m32r/kernel/irq.c
+++ b/arch/m32r/kernel/irq.c
@@ -80,7 +80,7 @@ asmlinkage unsigned int do_IRQ(int irq, struct pt_regs *regs)
#ifdef CONFIG_DEBUG_STACKOVERFLOW
/* FIXME M32R */
#endif
- __do_IRQ(irq);
+ generic_handle_irq(irq);
irq_exit();
set_irq_regs(old_regs);
diff --git a/arch/m68k/include/asm/string.h b/arch/m68k/include/asm/string.h
index 65b13128283..32198454da7 100644
--- a/arch/m68k/include/asm/string.h
+++ b/arch/m68k/include/asm/string.h
@@ -99,14 +99,12 @@ static inline int strcmp(const char *cs, const char *ct)
: "+a" (cs), "+a" (ct), "=d" (res));
return res;
}
+#endif /* CONFIG_COLDFIRE */
#define __HAVE_ARCH_MEMMOVE
extern void *memmove(void *, const void *, __kernel_size_t);
-#define __HAVE_ARCH_MEMCMP
-extern int memcmp(const void *, const void *, __kernel_size_t);
#define memcmp(d, s, n) __builtin_memcmp(d, s, n)
-#endif /* CONFIG_COLDFIRE */
#define __HAVE_ARCH_MEMSET
extern void *memset(void *, int, __kernel_size_t);
diff --git a/arch/m68k/lib/string.c b/arch/m68k/lib/string.c
index 4253f870e54..d399c5f2563 100644
--- a/arch/m68k/lib/string.c
+++ b/arch/m68k/lib/string.c
@@ -243,14 +243,3 @@ void *memmove(void *dest, const void *src, size_t n)
return xdest;
}
EXPORT_SYMBOL(memmove);
-
-int memcmp(const void *cs, const void *ct, size_t count)
-{
- const unsigned char *su1, *su2;
-
- for (su1 = cs, su2 = ct; count > 0; ++su1, ++su2, count--)
- if (*su1 != *su2)
- return *su1 < *su2 ? -1 : +1;
- return 0;
-}
-EXPORT_SYMBOL(memcmp);
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index ef332136f96..47e15ebfd89 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -141,6 +141,12 @@ SECTIONS {
*(__param)
__stop___param = .;
+ /* Built-in module versions */
+ . = ALIGN(4) ;
+ __start___modver = .;
+ *(__modver)
+ __stop___modver = .;
+
. = ALIGN(4) ;
_etext = . ;
} > TEXT
diff --git a/arch/m68knommu/lib/Makefile b/arch/m68knommu/lib/Makefile
index d94d709665a..32d852e586d 100644
--- a/arch/m68knommu/lib/Makefile
+++ b/arch/m68knommu/lib/Makefile
@@ -4,4 +4,4 @@
lib-y := ashldi3.o ashrdi3.o lshrdi3.o \
muldi3.o mulsi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o \
- checksum.o memcpy.o memset.o delay.o
+ checksum.o memcpy.o memmove.o memset.o delay.o
diff --git a/arch/m68knommu/lib/memmove.c b/arch/m68knommu/lib/memmove.c
new file mode 100644
index 00000000000..b3dcfe9dab7
--- /dev/null
+++ b/arch/m68knommu/lib/memmove.c
@@ -0,0 +1,105 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#define __IN_STRING_C
+
+#include <linux/module.h>
+#include <linux/string.h>
+
+void *memmove(void *dest, const void *src, size_t n)
+{
+ void *xdest = dest;
+ size_t temp;
+
+ if (!n)
+ return xdest;
+
+ if (dest < src) {
+ if ((long)dest & 1) {
+ char *cdest = dest;
+ const char *csrc = src;
+ *cdest++ = *csrc++;
+ dest = cdest;
+ src = csrc;
+ n--;
+ }
+ if (n > 2 && (long)dest & 2) {
+ short *sdest = dest;
+ const short *ssrc = src;
+ *sdest++ = *ssrc++;
+ dest = sdest;
+ src = ssrc;
+ n -= 2;
+ }
+ temp = n >> 2;
+ if (temp) {
+ long *ldest = dest;
+ const long *lsrc = src;
+ temp--;
+ do
+ *ldest++ = *lsrc++;
+ while (temp--);
+ dest = ldest;
+ src = lsrc;
+ }
+ if (n & 2) {
+ short *sdest = dest;
+ const short *ssrc = src;
+ *sdest++ = *ssrc++;
+ dest = sdest;
+ src = ssrc;
+ }
+ if (n & 1) {
+ char *cdest = dest;
+ const char *csrc = src;
+ *cdest = *csrc;
+ }
+ } else {
+ dest = (char *)dest + n;
+ src = (const char *)src + n;
+ if ((long)dest & 1) {
+ char *cdest = dest;
+ const char *csrc = src;
+ *--cdest = *--csrc;
+ dest = cdest;
+ src = csrc;
+ n--;
+ }
+ if (n > 2 && (long)dest & 2) {
+ short *sdest = dest;
+ const short *ssrc = src;
+ *--sdest = *--ssrc;
+ dest = sdest;
+ src = ssrc;
+ n -= 2;
+ }
+ temp = n >> 2;
+ if (temp) {
+ long *ldest = dest;
+ const long *lsrc = src;
+ temp--;
+ do
+ *--ldest = *--lsrc;
+ while (temp--);
+ dest = ldest;
+ src = lsrc;
+ }
+ if (n & 2) {
+ short *sdest = dest;
+ const short *ssrc = src;
+ *--sdest = *--ssrc;
+ dest = sdest;
+ src = ssrc;
+ }
+ if (n & 1) {
+ char *cdest = dest;
+ const char *csrc = src;
+ *--cdest = *--csrc;
+ }
+ }
+ return xdest;
+}
+EXPORT_SYMBOL(memmove);
diff --git a/arch/m68knommu/platform/5249/intc2.c b/arch/m68knommu/platform/5249/intc2.c
index d09d9da0453..c5151f84659 100644
--- a/arch/m68knommu/platform/5249/intc2.c
+++ b/arch/m68knommu/platform/5249/intc2.c
@@ -50,8 +50,10 @@ static int __init mcf_intc2_init(void)
int irq;
/* GPIO interrupt sources */
- for (irq = MCFINTC2_GPIOIRQ0; (irq <= MCFINTC2_GPIOIRQ7); irq++)
+ for (irq = MCFINTC2_GPIOIRQ0; (irq <= MCFINTC2_GPIOIRQ7); irq++) {
irq_desc[irq].chip = &intc2_irq_gpio_chip;
+ set_irq_handler(irq, handle_edge_irq);
+ }
return 0;
}
diff --git a/arch/m68knommu/platform/68328/entry.S b/arch/m68knommu/platform/68328/entry.S
index 240a7a6e25c..676960cf022 100644
--- a/arch/m68knommu/platform/68328/entry.S
+++ b/arch/m68knommu/platform/68328/entry.S
@@ -108,7 +108,6 @@ Luser_return:
movel %d1,%a2
1:
move %a2@(TI_FLAGS),%d1 /* thread_info->flags */
- andl #_TIF_WORK_MASK,%d1
jne Lwork_to_do
RESTORE_ALL
diff --git a/arch/m68knommu/platform/68360/commproc.c b/arch/m68knommu/platform/68360/commproc.c
index f27e688c404..8e4e10cc008 100644
--- a/arch/m68knommu/platform/68360/commproc.c
+++ b/arch/m68knommu/platform/68360/commproc.c
@@ -210,7 +210,7 @@ void
cpm_install_handler(int vec, void (*handler)(), void *dev_id)
{
- request_irq(vec, handler, IRQ_FLG_LOCK, "timer", dev_id);
+ request_irq(vec, handler, 0, "timer", dev_id);
/* if (cpm_vecs[vec].handler != 0) */
/* printk(KERN_INFO "CPM interrupt %x replacing %x\n", */
diff --git a/arch/m68knommu/platform/68360/config.c b/arch/m68knommu/platform/68360/config.c
index ac629fa3009..9dd5bca3874 100644
--- a/arch/m68knommu/platform/68360/config.c
+++ b/arch/m68knommu/platform/68360/config.c
@@ -75,7 +75,7 @@ void hw_timer_init(void)
/* Set compare register 32Khz / 32 / 10 = 100 */
TCMP = 10;
- request_irq(IRQ_MACHSPEC | 1, timer_routine, IRQ_FLG_LOCK, "timer", NULL);
+ request_irq(IRQ_MACHSPEC | 1, timer_routine, 0, "timer", NULL);
#endif
/* General purpose quicc timers: MC68360UM p7-20 */
diff --git a/arch/m68knommu/platform/68360/entry.S b/arch/m68knommu/platform/68360/entry.S
index 8a28788c0ee..46c1b18c9dc 100644
--- a/arch/m68knommu/platform/68360/entry.S
+++ b/arch/m68knommu/platform/68360/entry.S
@@ -104,7 +104,6 @@ Luser_return:
movel %d1,%a2
1:
move %a2@(TI_FLAGS),%d1 /* thread_info->flags */
- andl #_TIF_WORK_MASK,%d1
jne Lwork_to_do
RESTORE_ALL
diff --git a/arch/m68knommu/platform/68360/ints.c b/arch/m68knommu/platform/68360/ints.c
index ad96ab1051f..a29041c1a8a 100644
--- a/arch/m68knommu/platform/68360/ints.c
+++ b/arch/m68knommu/platform/68360/ints.c
@@ -132,8 +132,8 @@ void init_IRQ(void)
pquicc->intr_cimr = 0x00000000;
for (i = 0; (i < NR_IRQS); i++) {
- set_irq_chip(irq, &intc_irq_chip);
- set_irq_handler(irq, handle_level_irq);
+ set_irq_chip(i, &intc_irq_chip);
+ set_irq_handler(i, handle_level_irq);
}
}
diff --git a/arch/m68knommu/platform/coldfire/entry.S b/arch/m68knommu/platform/coldfire/entry.S
index 4ddfc3da70d..5837cf080b6 100644
--- a/arch/m68knommu/platform/coldfire/entry.S
+++ b/arch/m68knommu/platform/coldfire/entry.S
@@ -138,7 +138,6 @@ Luser_return:
andl #-THREAD_SIZE,%d1 /* at base of kernel stack */
movel %d1,%a0
movel %a0@(TI_FLAGS),%d1 /* get thread_info->flags */
- andl #0xefff,%d1
jne Lwork_to_do /* still work to do */
Lreturn:
diff --git a/arch/microblaze/include/asm/irqflags.h b/arch/microblaze/include/asm/irqflags.h
index 5fd31905775..c4532f032b3 100644
--- a/arch/microblaze/include/asm/irqflags.h
+++ b/arch/microblaze/include/asm/irqflags.h
@@ -12,7 +12,7 @@
#include <linux/types.h>
#include <asm/registers.h>
-#ifdef CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
static inline unsigned long arch_local_irq_save(void)
{
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index b23f6807587..885574a73f0 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -411,20 +411,19 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
static inline unsigned long pte_update(pte_t *p, unsigned long clr,
unsigned long set)
{
- unsigned long old, tmp, msr;
-
- __asm__ __volatile__("\
- msrclr %2, 0x2\n\
- nop\n\
- lw %0, %4, r0\n\
- andn %1, %0, %5\n\
- or %1, %1, %6\n\
- sw %1, %4, r0\n\
- mts rmsr, %2\n\
- nop"
- : "=&r" (old), "=&r" (tmp), "=&r" (msr), "=m" (*p)
- : "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set), "m" (*p)
- : "cc");
+ unsigned long flags, old, tmp;
+
+ raw_local_irq_save(flags);
+
+ __asm__ __volatile__( "lw %0, %2, r0 \n"
+ "andn %1, %0, %3 \n"
+ "or %1, %1, %4 \n"
+ "sw %1, %2, r0 \n"
+ : "=&r" (old), "=&r" (tmp)
+ : "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set)
+ : "cc");
+
+ raw_local_irq_restore(flags);
return old;
}
diff --git a/arch/microblaze/kernel/cpu/pvr.c b/arch/microblaze/kernel/cpu/pvr.c
index e01afa68273..488c1ed24e3 100644
--- a/arch/microblaze/kernel/cpu/pvr.c
+++ b/arch/microblaze/kernel/cpu/pvr.c
@@ -27,7 +27,7 @@
register unsigned tmp __asm__("r3"); \
tmp = 0x0; /* Prevent warning about unused */ \
__asm__ __volatile__ ( \
- "mfs %0, rpvr" #pvrid ";" \
+ "mfs %0, rpvr" #pvrid ";" \
: "=r" (tmp) : : "memory"); \
val = tmp; \
}
@@ -54,7 +54,7 @@ int cpu_has_pvr(void)
if (!(flags & PVR_MSR_BIT))
return 0;
- get_single_pvr(0x00, pvr0);
+ get_single_pvr(0, pvr0);
pr_debug("%s: pvr0 is 0x%08x\n", __func__, pvr0);
if (pvr0 & PVR0_PVR_FULL_MASK)
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index 42434008209..778a5ce2e4f 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -62,23 +62,32 @@ real_start:
andi r1, r1, ~2
mts rmsr, r1
/*
- * Here is checking mechanism which check if Microblaze has msr instructions
- * We load msr and compare it with previous r1 value - if is the same,
- * msr instructions works if not - cpu don't have them.
+ * According to Xilinx, msrclr instruction behaves like 'mfs rX,rpc'
+ * if the msrclr instruction is not enabled. We use this to detect
+ * if the opcode is available, by issuing msrclr and then testing the result.
+ * r8 == 0 - msr instructions are implemented
+ * r8 != 0 - msr instructions are not implemented
*/
- /* r8=0 - I have msr instr, 1 - I don't have them */
- rsubi r0, r0, 1 /* set the carry bit */
- msrclr r0, 0x4 /* try to clear it */
- /* read the carry bit, r8 will be '0' if msrclr exists */
- addik r8, r0, 0
+ msrclr r8, 0 /* clear nothing - just read msr for test */
+ cmpu r8, r8, r1 /* r1 must contain msr reg content */
/* r7 may point to an FDT, or there may be one linked in.
if it's in r7, we've got to save it away ASAP.
We ensure r7 points to a valid FDT, just in case the bootloader
is broken or non-existent */
beqi r7, no_fdt_arg /* NULL pointer? don't copy */
- lw r11, r0, r7 /* Does r7 point to a */
- rsubi r11, r11, OF_DT_HEADER /* valid FDT? */
+/* Does r7 point to a valid FDT? Load HEADER magic number */
+ /* Run time Big/Little endian platform */
+ /* Save 1 as word and load byte - 0 - BIG, 1 - LITTLE */
+ addik r11, r0, 0x1 /* BIG/LITTLE checking value */
+ /* __bss_start will be zeroed later - it is just temp location */
+ swi r11, r0, TOPHYS(__bss_start)
+ lbui r11, r0, TOPHYS(__bss_start)
+ beqid r11, big_endian /* DO NOT break delay stop dependency */
+ lw r11, r0, r7 /* Big endian load in delay slot */
+ lwr r11, r0, r7 /* Little endian load */
+big_endian:
+ rsubi r11, r11, OF_DT_HEADER /* Check FDT header */
beqi r11, _prepare_copy_fdt
or r7, r0, r0 /* clear R7 when not valid DTB */
bnei r11, no_fdt_arg /* No - get out of here */
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index 25f6e07d8de..782680de312 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -147,10 +147,6 @@
#if CONFIG_XILINX_MICROBLAZE0_USE_BARREL > 0
#define BSRLI(rD, rA, imm) \
bsrli rD, rA, imm
- #elif CONFIG_XILINX_MICROBLAZE0_USE_DIV > 0
- #define BSRLI(rD, rA, imm) \
- ori rD, r0, (1 << imm); \
- idivu rD, rD, rA
#else
#define BSRLI(rD, rA, imm) BSRLI ## imm (rD, rA)
/* Only the used shift constants defined here - add more if needed */
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index bb1558e4b28..9312fbb37ef 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -161,11 +161,11 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
if (msr)
eprintk("!!!Your kernel has setup MSR instruction but "
- "CPU don't have it %d\n", msr);
+ "CPU don't have it %x\n", msr);
#else
if (!msr)
eprintk("!!!Your kernel not setup MSR instruction but "
- "CPU have it %d\n", msr);
+ "CPU have it %x\n", msr);
#endif
for (src = __ivt_start; src < __ivt_end; src++, dst++)
diff --git a/arch/microblaze/lib/fastcopy.S b/arch/microblaze/lib/fastcopy.S
index fdc48bb065d..62021d7e249 100644
--- a/arch/microblaze/lib/fastcopy.S
+++ b/arch/microblaze/lib/fastcopy.S
@@ -29,6 +29,10 @@
* between mem locations with size of xfer spec'd in bytes
*/
+#ifdef __MICROBLAZEEL__
+#error Microblaze LE not support ASM optimized lib func. Disable OPT_LIB_ASM.
+#endif
+
#include <linux/linkage.h>
.text
.globl memcpy
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 991d5998d6b..fe56a23e1ff 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -240,6 +240,12 @@ struct machdep_calls {
* claims to support kexec.
*/
int (*machine_kexec_prepare)(struct kimage *image);
+
+ /* Called to perform the _real_ kexec.
+ * Do NOT allocate memory or fail here. We are past the point of
+ * no return.
+ */
+ void (*machine_kexec)(struct kimage *image);
#endif /* CONFIG_KEXEC */
#ifdef CONFIG_SUSPEND
diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
index 8eaed81ea64..17194fcd404 100644
--- a/arch/powerpc/include/asm/mmu-book3e.h
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -40,8 +40,8 @@
/* MAS registers bit definitions */
-#define MAS0_TLBSEL(x) ((x << 28) & 0x30000000)
-#define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000)
+#define MAS0_TLBSEL(x) (((x) << 28) & 0x30000000)
+#define MAS0_ESEL(x) (((x) << 16) & 0x0FFF0000)
#define MAS0_NV(x) ((x) & 0x00000FFF)
#define MAS0_HES 0x00004000
#define MAS0_WQ_ALLWAYS 0x00000000
@@ -50,12 +50,12 @@
#define MAS1_VALID 0x80000000
#define MAS1_IPROT 0x40000000
-#define MAS1_TID(x) ((x << 16) & 0x3FFF0000)
+#define MAS1_TID(x) (((x) << 16) & 0x3FFF0000)
#define MAS1_IND 0x00002000
#define MAS1_TS 0x00001000
#define MAS1_TSIZE_MASK 0x00000f80
#define MAS1_TSIZE_SHIFT 7
-#define MAS1_TSIZE(x) ((x << MAS1_TSIZE_SHIFT) & MAS1_TSIZE_MASK)
+#define MAS1_TSIZE(x) (((x) << MAS1_TSIZE_SHIFT) & MAS1_TSIZE_MASK)
#define MAS2_EPN 0xFFFFF000
#define MAS2_X0 0x00000040
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index 53b64be40eb..da4b2000854 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -101,7 +101,7 @@ extern phys_addr_t kernstart_addr;
#ifdef CONFIG_FLATMEM
#define ARCH_PFN_OFFSET (MEMORY_START >> PAGE_SHIFT)
-#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < (ARCH_PFN_OFFSET + max_mapnr))
+#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr)
#endif
#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S
index 55cba4a8a95..f8cd9fba4d3 100644
--- a/arch/powerpc/kernel/cpu_setup_6xx.S
+++ b/arch/powerpc/kernel/cpu_setup_6xx.S
@@ -18,7 +18,7 @@
#include <asm/mmu.h>
_GLOBAL(__setup_cpu_603)
- mflr r4
+ mflr r5
BEGIN_MMU_FTR_SECTION
li r10,0
mtspr SPRN_SPRG_603_LRU,r10 /* init SW LRU tracking */
@@ -27,60 +27,60 @@ BEGIN_FTR_SECTION
bl __init_fpu_registers
END_FTR_SECTION_IFCLR(CPU_FTR_FPU_UNAVAILABLE)
bl setup_common_caches
- mtlr r4
+ mtlr r5
blr
_GLOBAL(__setup_cpu_604)
- mflr r4
+ mflr r5
bl setup_common_caches
bl setup_604_hid0
- mtlr r4
+ mtlr r5
blr
_GLOBAL(__setup_cpu_750)
- mflr r4
+ mflr r5
bl __init_fpu_registers
bl setup_common_caches
bl setup_750_7400_hid0
- mtlr r4
+ mtlr r5
blr
_GLOBAL(__setup_cpu_750cx)
- mflr r4
+ mflr r5
bl __init_fpu_registers
bl setup_common_caches
bl setup_750_7400_hid0
bl setup_750cx
- mtlr r4
+ mtlr r5
blr
_GLOBAL(__setup_cpu_750fx)
- mflr r4
+ mflr r5
bl __init_fpu_registers
bl setup_common_caches
bl setup_750_7400_hid0
bl setup_750fx
- mtlr r4
+ mtlr r5
blr
_GLOBAL(__setup_cpu_7400)
- mflr r4
+ mflr r5
bl __init_fpu_registers
bl setup_7400_workarounds
bl setup_common_caches
bl setup_750_7400_hid0
- mtlr r4
+ mtlr r5
blr
_GLOBAL(__setup_cpu_7410)
- mflr r4
+ mflr r5
bl __init_fpu_registers
bl setup_7410_workarounds
bl setup_common_caches
bl setup_750_7400_hid0
li r3,0
mtspr SPRN_L2CR2,r3
- mtlr r4
+ mtlr r5
blr
_GLOBAL(__setup_cpu_745x)
- mflr r4
+ mflr r5
bl setup_common_caches
bl setup_745x_specifics
- mtlr r4
+ mtlr r5
blr
/* Enable caches for 603's, 604, 750 & 7400 */
@@ -194,10 +194,10 @@ setup_750cx:
cror 4*cr0+eq,4*cr0+eq,4*cr1+eq
cror 4*cr0+eq,4*cr0+eq,4*cr2+eq
bnelr
- lwz r6,CPU_SPEC_FEATURES(r5)
+ lwz r6,CPU_SPEC_FEATURES(r4)
li r7,CPU_FTR_CAN_NAP
andc r6,r6,r7
- stw r6,CPU_SPEC_FEATURES(r5)
+ stw r6,CPU_SPEC_FEATURES(r4)
blr
/* 750fx specific
@@ -225,12 +225,12 @@ BEGIN_FTR_SECTION
andis. r11,r11,L3CR_L3E@h
beq 1f
END_FTR_SECTION_IFSET(CPU_FTR_L3CR)
- lwz r6,CPU_SPEC_FEATURES(r5)
+ lwz r6,CPU_SPEC_FEATURES(r4)
andi. r0,r6,CPU_FTR_L3_DISABLE_NAP
beq 1f
li r7,CPU_FTR_CAN_NAP
andc r6,r6,r7
- stw r6,CPU_SPEC_FEATURES(r5)
+ stw r6,CPU_SPEC_FEATURES(r4)
1:
mfspr r11,SPRN_HID0
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 8d74a24c550..e8e915ce3d8 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -2076,8 +2076,8 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s)
* pointer on ppc64 and booke as we are running at 0 in real mode
* on ppc64 and reloc_offset is always 0 on booke.
*/
- if (s->cpu_setup) {
- s->cpu_setup(offset, s);
+ if (t->cpu_setup) {
+ t->cpu_setup(offset, t);
}
#endif /* CONFIG_PPC64 || CONFIG_BOOKE */
}
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index 49a170af814..a5f8672eeff 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -87,7 +87,10 @@ void machine_kexec(struct kimage *image)
save_ftrace_enabled = __ftrace_enabled_save();
- default_machine_kexec(image);
+ if (ppc_md.machine_kexec)
+ ppc_md.machine_kexec(image);
+ else
+ default_machine_kexec(image);
__ftrace_enabled_restore(save_ftrace_enabled);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 7a1d5cb7693..8303a6c65ef 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -353,6 +353,7 @@ static void switch_booke_debug_regs(struct thread_struct *new_thread)
prime_debug_regs(new_thread);
}
#else /* !CONFIG_PPC_ADV_DEBUG_REGS */
+#ifndef CONFIG_HAVE_HW_BREAKPOINT
static void set_debug_reg_defaults(struct thread_struct *thread)
{
if (thread->dabr) {
@@ -360,6 +361,7 @@ static void set_debug_reg_defaults(struct thread_struct *thread)
set_dabr(0);
}
}
+#endif /* !CONFIG_HAVE_HW_BREAKPOINT */
#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
int set_dabr(unsigned long dabr)
@@ -670,11 +672,11 @@ void flush_thread(void)
{
discard_lazy_cpu_state();
-#ifdef CONFIG_HAVE_HW_BREAKPOINTS
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
flush_ptrace_hw_breakpoint(current);
-#else /* CONFIG_HAVE_HW_BREAKPOINTS */
+#else /* CONFIG_HAVE_HW_BREAKPOINT */
set_debug_reg_defaults(&current->thread);
-#endif /* CONFIG_HAVE_HW_BREAKPOINTS */
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
}
void
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index bf5cb91f07d..fd481232957 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -186,7 +186,7 @@ static void unmap_cpu_from_node(unsigned long cpu)
dbg("removing cpu %lu from node %d\n", cpu, node);
if (cpumask_test_cpu(cpu, node_to_cpumask_map[node])) {
- cpumask_set_cpu(cpu, node_to_cpumask_map[node]);
+ cpumask_clear_cpu(cpu, node_to_cpumask_map[node]);
} else {
printk(KERN_ERR "WARNING: cpu %lu not found in node %d\n",
cpu, node);
@@ -1289,10 +1289,9 @@ u64 memory_hotplug_max(void)
}
#endif /* CONFIG_MEMORY_HOTPLUG */
-/* Vrtual Processor Home Node (VPHN) support */
+/* Virtual Processor Home Node (VPHN) support */
#ifdef CONFIG_PPC_SPLPAR
-#define VPHN_NR_CHANGE_CTRS (8)
-static u8 vphn_cpu_change_counts[NR_CPUS][VPHN_NR_CHANGE_CTRS];
+static u8 vphn_cpu_change_counts[NR_CPUS][MAX_DISTANCE_REF_POINTS];
static cpumask_t cpu_associativity_changes_mask;
static int vphn_enabled;
static void set_topology_timer(void);
@@ -1303,16 +1302,18 @@ static void set_topology_timer(void);
*/
static void setup_cpu_associativity_change_counters(void)
{
- int cpu = 0;
+ int cpu;
+
+ /* The VPHN feature supports a maximum of 8 reference points */
+ BUILD_BUG_ON(MAX_DISTANCE_REF_POINTS > 8);
for_each_possible_cpu(cpu) {
- int i = 0;
+ int i;
u8 *counts = vphn_cpu_change_counts[cpu];
volatile u8 *hypervisor_counts = lppaca[cpu].vphn_assoc_counts;
- for (i = 0; i < VPHN_NR_CHANGE_CTRS; i++) {
+ for (i = 0; i < distance_ref_points_depth; i++)
counts[i] = hypervisor_counts[i];
- }
}
}
@@ -1329,7 +1330,7 @@ static void setup_cpu_associativity_change_counters(void)
*/
static int update_cpu_associativity_changes_mask(void)
{
- int cpu = 0, nr_cpus = 0;
+ int cpu, nr_cpus = 0;
cpumask_t *changes = &cpu_associativity_changes_mask;
cpumask_clear(changes);
@@ -1339,8 +1340,8 @@ static int update_cpu_associativity_changes_mask(void)
u8 *counts = vphn_cpu_change_counts[cpu];
volatile u8 *hypervisor_counts = lppaca[cpu].vphn_assoc_counts;
- for (i = 0; i < VPHN_NR_CHANGE_CTRS; i++) {
- if (hypervisor_counts[i] > counts[i]) {
+ for (i = 0; i < distance_ref_points_depth; i++) {
+ if (hypervisor_counts[i] != counts[i]) {
counts[i] = hypervisor_counts[i];
changed = 1;
}
@@ -1354,8 +1355,11 @@ static int update_cpu_associativity_changes_mask(void)
return nr_cpus;
}
-/* 6 64-bit registers unpacked into 12 32-bit associativity values */
-#define VPHN_ASSOC_BUFSIZE (6*sizeof(u64)/sizeof(u32))
+/*
+ * 6 64-bit registers unpacked into 12 32-bit associativity values. To form
+ * the complete property we have to add the length in the first cell.
+ */
+#define VPHN_ASSOC_BUFSIZE (6*sizeof(u64)/sizeof(u32) + 1)
/*
* Convert the associativity domain numbers returned from the hypervisor
@@ -1363,15 +1367,14 @@ static int update_cpu_associativity_changes_mask(void)
*/
static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked)
{
- int i = 0;
- int nr_assoc_doms = 0;
+ int i, nr_assoc_doms = 0;
const u16 *field = (const u16*) packed;
#define VPHN_FIELD_UNUSED (0xffff)
#define VPHN_FIELD_MSB (0x8000)
#define VPHN_FIELD_MASK (~VPHN_FIELD_MSB)
- for (i = 0; i < VPHN_ASSOC_BUFSIZE; i++) {
+ for (i = 1; i < VPHN_ASSOC_BUFSIZE; i++) {
if (*field == VPHN_FIELD_UNUSED) {
/* All significant fields processed, and remaining
* fields contain the reserved value of all 1's.
@@ -1379,14 +1382,12 @@ static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked)
*/
unpacked[i] = *((u32*)field);
field += 2;
- }
- else if (*field & VPHN_FIELD_MSB) {
+ } else if (*field & VPHN_FIELD_MSB) {
/* Data is in the lower 15 bits of this field */
unpacked[i] = *field & VPHN_FIELD_MASK;
field++;
nr_assoc_doms++;
- }
- else {
+ } else {
/* Data is in the lower 15 bits of this field
* concatenated with the next 16 bit field
*/
@@ -1396,6 +1397,9 @@ static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked)
}
}
+ /* The first cell contains the length of the property */
+ unpacked[0] = nr_assoc_doms;
+
return nr_assoc_doms;
}
@@ -1405,7 +1409,7 @@ static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked)
*/
static long hcall_vphn(unsigned long cpu, unsigned int *associativity)
{
- long rc = 0;
+ long rc;
long retbuf[PLPAR_HCALL9_BUFSIZE] = {0};
u64 flags = 1;
int hwcpu = get_hard_smp_processor_id(cpu);
@@ -1419,7 +1423,7 @@ static long hcall_vphn(unsigned long cpu, unsigned int *associativity)
static long vphn_get_associativity(unsigned long cpu,
unsigned int *associativity)
{
- long rc = 0;
+ long rc;
rc = hcall_vphn(cpu, associativity);
@@ -1445,9 +1449,9 @@ static long vphn_get_associativity(unsigned long cpu,
*/
int arch_update_cpu_topology(void)
{
- int cpu = 0, nid = 0, old_nid = 0;
+ int cpu, nid, old_nid;
unsigned int associativity[VPHN_ASSOC_BUFSIZE] = {0};
- struct sys_device *sysdev = NULL;
+ struct sys_device *sysdev;
for_each_cpu_mask(cpu, cpu_associativity_changes_mask) {
vphn_get_associativity(cpu, associativity);
@@ -1512,7 +1516,8 @@ int start_topology_update(void)
{
int rc = 0;
- if (firmware_has_feature(FW_FEATURE_VPHN)) {
+ if (firmware_has_feature(FW_FEATURE_VPHN) &&
+ get_lppaca()->shared_proc) {
vphn_enabled = 1;
setup_cpu_associativity_change_counters();
init_timer_deferrable(&topology_timer);
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 1ec06576f61..c14d09f614f 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -38,13 +38,11 @@ DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
* neesd to be flushed. This function will either perform the flush
* immediately or will batch it up if the current CPU has an active
* batch on it.
- *
- * Must be called from within some kind of spinlock/non-preempt region...
*/
void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, unsigned long pte, int huge)
{
- struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
+ struct ppc64_tlb_batch *batch = &get_cpu_var(ppc64_tlb_batch);
unsigned long vsid, vaddr;
unsigned int psize;
int ssize;
@@ -99,6 +97,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
*/
if (!batch->active) {
flush_hash_page(vaddr, rpte, psize, ssize, 0);
+ put_cpu_var(ppc64_tlb_batch);
return;
}
@@ -127,6 +126,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
batch->index = ++i;
if (i >= PPC64_TLB_BATCH_NR)
__flush_tlb_pending(batch);
+ put_cpu_var(ppc64_tlb_batch);
}
/*
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 5d3ea9f60dd..ca5d5898d32 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -713,6 +713,13 @@ EXPORT_SYMBOL(arch_free_page);
/* NB: reg/unreg are called while guarded with the tracepoints_mutex */
extern long hcall_tracepoint_refcount;
+/*
+ * Since the tracing code might execute hcalls we need to guard against
+ * recursion. One example of this are spinlocks calling H_YIELD on
+ * shared processor partitions.
+ */
+static DEFINE_PER_CPU(unsigned int, hcall_trace_depth);
+
void hcall_tracepoint_regfunc(void)
{
hcall_tracepoint_refcount++;
@@ -725,12 +732,42 @@ void hcall_tracepoint_unregfunc(void)
void __trace_hcall_entry(unsigned long opcode, unsigned long *args)
{
+ unsigned long flags;
+ unsigned int *depth;
+
+ local_irq_save(flags);
+
+ depth = &__get_cpu_var(hcall_trace_depth);
+
+ if (*depth)
+ goto out;
+
+ (*depth)++;
trace_hcall_entry(opcode, args);
+ (*depth)--;
+
+out:
+ local_irq_restore(flags);
}
void __trace_hcall_exit(long opcode, unsigned long retval,
unsigned long *retbuf)
{
+ unsigned long flags;
+ unsigned int *depth;
+
+ local_irq_save(flags);
+
+ depth = &__get_cpu_var(hcall_trace_depth);
+
+ if (*depth)
+ goto out;
+
+ (*depth)++;
trace_hcall_exit(opcode, retval, retbuf);
+ (*depth)--;
+
+out:
+ local_irq_restore(flags);
}
#endif
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index ff19efdf6fe..636bcb81d06 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -406,7 +406,7 @@ config QDIO
If unsure, say Y.
config CHSC_SCH
- def_tristate y
+ def_tristate m
prompt "Support for CHSC subchannels"
help
This driver allows usage of CHSC subchannels. A CHSC subchannel
diff --git a/arch/s390/boot/compressed/misc.c b/arch/s390/boot/compressed/misc.c
index 0851eb1e919..2751b3a8a66 100644
--- a/arch/s390/boot/compressed/misc.c
+++ b/arch/s390/boot/compressed/misc.c
@@ -133,11 +133,12 @@ unsigned long decompress_kernel(void)
unsigned long output_addr;
unsigned char *output;
- check_ipl_parmblock((void *) 0, (unsigned long) output + SZ__bss_start);
+ output_addr = ((unsigned long) &_end + HEAP_SIZE + 4095UL) & -4096UL;
+ check_ipl_parmblock((void *) 0, output_addr + SZ__bss_start);
memset(&_bss, 0, &_ebss - &_bss);
free_mem_ptr = (unsigned long)&_end;
free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
- output = (unsigned char *) ((free_mem_end_ptr + 4095UL) & -4096UL);
+ output = (unsigned char *) output_addr;
#ifdef CONFIG_BLK_DEV_INITRD
/*
diff --git a/arch/s390/crypto/sha_common.c b/arch/s390/crypto/sha_common.c
index f42dbabc0d3..48884f89ab9 100644
--- a/arch/s390/crypto/sha_common.c
+++ b/arch/s390/crypto/sha_common.c
@@ -38,6 +38,7 @@ int s390_sha_update(struct shash_desc *desc, const u8 *data, unsigned int len)
BUG_ON(ret != bsize);
data += bsize - index;
len -= bsize - index;
+ index = 0;
}
/* process as many blocks as possible */
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index 76daea11718..5c5ba10384c 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -36,14 +36,19 @@
static inline int atomic_read(const atomic_t *v)
{
- barrier();
- return v->counter;
+ int c;
+
+ asm volatile(
+ " l %0,%1\n"
+ : "=d" (c) : "Q" (v->counter));
+ return c;
}
static inline void atomic_set(atomic_t *v, int i)
{
- v->counter = i;
- barrier();
+ asm volatile(
+ " st %1,%0\n"
+ : "=Q" (v->counter) : "d" (i));
}
static inline int atomic_add_return(int i, atomic_t *v)
@@ -128,14 +133,19 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
static inline long long atomic64_read(const atomic64_t *v)
{
- barrier();
- return v->counter;
+ long long c;
+
+ asm volatile(
+ " lg %0,%1\n"
+ : "=d" (c) : "Q" (v->counter));
+ return c;
}
static inline void atomic64_set(atomic64_t *v, long long i)
{
- v->counter = i;
- barrier();
+ asm volatile(
+ " stg %1,%0\n"
+ : "=Q" (v->counter) : "d" (i));
}
static inline long long atomic64_add_return(long long i, atomic64_t *v)
diff --git a/arch/s390/include/asm/cache.h b/arch/s390/include/asm/cache.h
index 24aafa68b64..2a30d5ac066 100644
--- a/arch/s390/include/asm/cache.h
+++ b/arch/s390/include/asm/cache.h
@@ -13,6 +13,7 @@
#define L1_CACHE_BYTES 256
#define L1_CACHE_SHIFT 8
+#define NET_SKB_PAD 32
#define __read_mostly __attribute__((__section__(".data..read_mostly")))
diff --git a/arch/s390/include/asm/cacheflush.h b/arch/s390/include/asm/cacheflush.h
index 405cc97c624..7e1f7762062 100644
--- a/arch/s390/include/asm/cacheflush.h
+++ b/arch/s390/include/asm/cacheflush.h
@@ -1,29 +1,8 @@
#ifndef _S390_CACHEFLUSH_H
#define _S390_CACHEFLUSH_H
-/* Keep includes the same across arches. */
-#include <linux/mm.h>
-
/* Caches aren't brain-dead on the s390. */
-#define flush_cache_all() do { } while (0)
-#define flush_cache_mm(mm) do { } while (0)
-#define flush_cache_dup_mm(mm) do { } while (0)
-#define flush_cache_range(vma, start, end) do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
-#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
-#define flush_dcache_page(page) do { } while (0)
-#define flush_dcache_mmap_lock(mapping) do { } while (0)
-#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-#define flush_icache_range(start, end) do { } while (0)
-#define flush_icache_page(vma,pg) do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
-#define flush_cache_vmap(start, end) do { } while (0)
-#define flush_cache_vunmap(start, end) do { } while (0)
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
+#include <asm-generic/cacheflush.h>
#ifdef CONFIG_DEBUG_PAGEALLOC
void kernel_map_pages(struct page *page, int numpages, int enable);
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index bf3de04170a..2c79b641627 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -148,11 +148,6 @@ extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
*/
extern unsigned long thread_saved_pc(struct task_struct *t);
-/*
- * Print register of task into buffer. Used in fs/proc/array.c.
- */
-extern void task_show_regs(struct seq_file *m, struct task_struct *task);
-
extern void show_code(struct pt_regs *regs);
unsigned long get_wchan(struct task_struct *p);
diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h
index f1f644f2240..9074a54c4d1 100644
--- a/arch/s390/include/asm/tlb.h
+++ b/arch/s390/include/asm/tlb.h
@@ -22,6 +22,7 @@
*/
#include <linux/mm.h>
+#include <linux/pagemap.h>
#include <linux/swap.h>
#include <asm/processor.h>
#include <asm/pgalloc.h>
diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index 5eb78dd584c..b5a4a739b47 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -237,43 +237,6 @@ void show_regs(struct pt_regs *regs)
show_last_breaking_event(regs);
}
-/* This is called from fs/proc/array.c */
-void task_show_regs(struct seq_file *m, struct task_struct *task)
-{
- struct pt_regs *regs;
-
- regs = task_pt_regs(task);
- seq_printf(m, "task: %p, ksp: %p\n",
- task, (void *)task->thread.ksp);
- seq_printf(m, "User PSW : %p %p\n",
- (void *) regs->psw.mask, (void *)regs->psw.addr);
-
- seq_printf(m, "User GPRS: " FOURLONG,
- regs->gprs[0], regs->gprs[1],
- regs->gprs[2], regs->gprs[3]);
- seq_printf(m, " " FOURLONG,
- regs->gprs[4], regs->gprs[5],
- regs->gprs[6], regs->gprs[7]);
- seq_printf(m, " " FOURLONG,
- regs->gprs[8], regs->gprs[9],
- regs->gprs[10], regs->gprs[11]);
- seq_printf(m, " " FOURLONG,
- regs->gprs[12], regs->gprs[13],
- regs->gprs[14], regs->gprs[15]);
- seq_printf(m, "User ACRS: %08x %08x %08x %08x\n",
- task->thread.acrs[0], task->thread.acrs[1],
- task->thread.acrs[2], task->thread.acrs[3]);
- seq_printf(m, " %08x %08x %08x %08x\n",
- task->thread.acrs[4], task->thread.acrs[5],
- task->thread.acrs[6], task->thread.acrs[7]);
- seq_printf(m, " %08x %08x %08x %08x\n",
- task->thread.acrs[8], task->thread.acrs[9],
- task->thread.acrs[10], task->thread.acrs[11]);
- seq_printf(m, " %08x %08x %08x %08x\n",
- task->thread.acrs[12], task->thread.acrs[13],
- task->thread.acrs[14], task->thread.acrs[15]);
-}
-
static DEFINE_SPINLOCK(die_lock);
void die(const char * str, struct pt_regs * regs, long err)
diff --git a/arch/s390/lib/uaccess_std.c b/arch/s390/lib/uaccess_std.c
index 07deaeee14c..a6c4f7ed24a 100644
--- a/arch/s390/lib/uaccess_std.c
+++ b/arch/s390/lib/uaccess_std.c
@@ -125,9 +125,9 @@ static size_t copy_in_user_std(size_t size, void __user *to,
unsigned long tmp1;
asm volatile(
+ " sacf 256\n"
" "AHI" %0,-1\n"
" jo 5f\n"
- " sacf 256\n"
" bras %3,3f\n"
"0:"AHI" %0,257\n"
"1: mvc 0(1,%1),0(%2)\n"
@@ -142,9 +142,8 @@ static size_t copy_in_user_std(size_t size, void __user *to,
"3:"AHI" %0,-256\n"
" jnm 2b\n"
"4: ex %0,1b-0b(%3)\n"
- " sacf 0\n"
"5: "SLR" %0,%0\n"
- "6:\n"
+ "6: sacf 0\n"
EX_TABLE(1b,6b) EX_TABLE(2b,0b) EX_TABLE(4b,0b)
: "+a" (size), "+a" (to), "+a" (from), "=a" (tmp1)
: : "cc", "memory");
@@ -156,9 +155,9 @@ static size_t clear_user_std(size_t size, void __user *to)
unsigned long tmp1, tmp2;
asm volatile(
+ " sacf 256\n"
" "AHI" %0,-1\n"
" jo 5f\n"
- " sacf 256\n"
" bras %3,3f\n"
" xc 0(1,%1),0(%1)\n"
"0:"AHI" %0,257\n"
@@ -178,9 +177,8 @@ static size_t clear_user_std(size_t size, void __user *to)
"3:"AHI" %0,-256\n"
" jnm 2b\n"
"4: ex %0,0(%3)\n"
- " sacf 0\n"
"5: "SLR" %0,%0\n"
- "6:\n"
+ "6: sacf 0\n"
EX_TABLE(1b,6b) EX_TABLE(2b,0b) EX_TABLE(4b,0b)
: "+a" (size), "+a" (to), "=a" (tmp1), "=a" (tmp2)
: : "cc", "memory");
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 0c719c61972..e1850c28cd6 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -336,7 +336,8 @@ void page_table_free(struct mm_struct *mm, unsigned long *table)
page->flags ^= bits;
if (page->flags & FRAG_MASK) {
/* Page now has some free pgtable fragments. */
- list_move(&page->lru, &mm->context.pgtable_list);
+ if (!list_empty(&page->lru))
+ list_move(&page->lru, &mm->context.pgtable_list);
page = NULL;
} else
/* All fragments of the 4K page have been freed. */
diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h
index a78701da775..4a5350037c8 100644
--- a/arch/sh/include/asm/sections.h
+++ b/arch/sh/include/asm/sections.h
@@ -3,7 +3,7 @@
#include <asm-generic/sections.h>
-extern void __nosave_begin, __nosave_end;
+extern long __nosave_begin, __nosave_end;
extern long __machvec_start, __machvec_end;
extern char __uncached_start, __uncached_end;
extern char _ebss[];
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
index 672944f5b19..e53b4b38bd1 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -14,7 +14,7 @@
#include <linux/io.h>
#include <linux/sh_timer.h>
#include <linux/serial_sci.h>
-#include <asm/machtypes.h>
+#include <generated/machtypes.h>
static struct resource rtc_resources[] = {
[0] = {
@@ -255,12 +255,17 @@ static struct platform_device *sh7750_early_devices[] __initdata = {
void __init plat_early_device_setup(void)
{
+ struct platform_device *dev[1];
+
if (mach_is_rts7751r2d()) {
scif_platform_data.scscr |= SCSCR_CKE1;
- early_platform_add_devices(&scif_device, 1);
+ dev[0] = &scif_device;
+ early_platform_add_devices(dev, 1);
} else {
- early_platform_add_devices(&sci_device, 1);
- early_platform_add_devices(&scif_device, 1);
+ dev[0] = &sci_device;
+ early_platform_add_devices(dev, 1);
+ dev[0] = &scif_device;
+ early_platform_add_devices(dev, 1);
}
early_platform_add_devices(sh7750_early_devices,
diff --git a/arch/sh/lib/delay.c b/arch/sh/lib/delay.c
index faa8f86c0db..0901b2f14e1 100644
--- a/arch/sh/lib/delay.c
+++ b/arch/sh/lib/delay.c
@@ -10,6 +10,16 @@
void __delay(unsigned long loops)
{
__asm__ __volatile__(
+ /*
+ * ST40-300 appears to have an issue with this code,
+ * normally taking two cycles each loop, as with all
+ * other SH variants. If however the branch and the
+ * delay slot straddle an 8 byte boundary, this increases
+ * to 3 cycles.
+ * This align directive ensures this doesn't occur.
+ */
+ ".balign 8\n\t"
+
"tst %0, %0\n\t"
"1:\t"
"bf/s 1b\n\t"
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index 88d3dc3d30d..5a580ea0442 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -108,7 +108,8 @@ void copy_user_highpage(struct page *to, struct page *from,
kunmap_atomic(vfrom, KM_USER0);
}
- if (pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
+ if (pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK) ||
+ (vma->vm_flags & VM_EXEC))
__flush_purge_region(vto, PAGE_SIZE);
kunmap_atomic(vto, KM_USER1);
diff --git a/arch/sparc/include/asm/pcr.h b/arch/sparc/include/asm/pcr.h
index a2f5c61f924..843e4faf6a5 100644
--- a/arch/sparc/include/asm/pcr.h
+++ b/arch/sparc/include/asm/pcr.h
@@ -43,4 +43,6 @@ static inline u64 picl_value(unsigned int nmi_hz)
extern u64 pcr_enable;
+extern int pcr_arch_init(void);
+
#endif /* __PCR_H */
diff --git a/arch/sparc/kernel/iommu.c b/arch/sparc/kernel/iommu.c
index 47977a77f6c..72509d0e34b 100644
--- a/arch/sparc/kernel/iommu.c
+++ b/arch/sparc/kernel/iommu.c
@@ -255,10 +255,9 @@ static inline iopte_t *alloc_npages(struct device *dev, struct iommu *iommu,
static int iommu_alloc_ctx(struct iommu *iommu)
{
int lowest = iommu->ctx_lowest_free;
- int sz = IOMMU_NUM_CTXS - lowest;
- int n = find_next_zero_bit(iommu->ctx_bitmap, sz, lowest);
+ int n = find_next_zero_bit(iommu->ctx_bitmap, IOMMU_NUM_CTXS, lowest);
- if (unlikely(n == sz)) {
+ if (unlikely(n == IOMMU_NUM_CTXS)) {
n = find_next_zero_bit(iommu->ctx_bitmap, lowest, 1);
if (unlikely(n == lowest)) {
printk(KERN_WARNING "IOMMU: Ran out of contexts.\n");
diff --git a/arch/sparc/kernel/pcr.c b/arch/sparc/kernel/pcr.c
index ae96cf52a95..7c2ced612b8 100644
--- a/arch/sparc/kernel/pcr.c
+++ b/arch/sparc/kernel/pcr.c
@@ -167,5 +167,3 @@ out_unregister:
unregister_perf_hsvc();
return err;
}
-
-early_initcall(pcr_arch_init);
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index b6a2b8f4704..555a76d1f4a 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -49,6 +49,7 @@
#include <asm/mdesc.h>
#include <asm/ldc.h>
#include <asm/hypervisor.h>
+#include <asm/pcr.h>
#include "cpumap.h"
@@ -1358,6 +1359,7 @@ void __cpu_die(unsigned int cpu)
void __init smp_cpus_done(unsigned int max_cpus)
{
+ pcr_arch_init();
}
void smp_send_reschedule(int cpu)
diff --git a/arch/sparc/kernel/una_asm_32.S b/arch/sparc/kernel/una_asm_32.S
index 8cc03458eb7..8f096e84a93 100644
--- a/arch/sparc/kernel/una_asm_32.S
+++ b/arch/sparc/kernel/una_asm_32.S
@@ -24,9 +24,9 @@ retl_efault:
.globl __do_int_store
__do_int_store:
ld [%o2], %g1
- cmp %1, 2
+ cmp %o1, 2
be 2f
- cmp %1, 4
+ cmp %o1, 4
be 1f
srl %g1, 24, %g2
srl %g1, 16, %g7
diff --git a/arch/sparc/lib/bitext.c b/arch/sparc/lib/bitext.c
index 764b3eb7b60..48d00e72ce1 100644
--- a/arch/sparc/lib/bitext.c
+++ b/arch/sparc/lib/bitext.c
@@ -10,7 +10,7 @@
*/
#include <linux/string.h>
-#include <linux/bitops.h>
+#include <linux/bitmap.h>
#include <asm/bitext.h>
@@ -80,8 +80,7 @@ int bit_map_string_get(struct bit_map *t, int len, int align)
while (test_bit(offset + i, t->map) == 0) {
i++;
if (i == len) {
- for (i = 0; i < len; i++)
- __set_bit(offset + i, t->map);
+ bitmap_set(t->map, offset, len);
if (offset == t->first_free)
t->first_free = find_next_zero_bit
(t->map, t->size,
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index 211ca3f7fd1..4ea15ca89b2 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -88,6 +88,7 @@ extern int acpi_disabled;
extern int acpi_pci_disabled;
extern int acpi_skip_timer_override;
extern int acpi_use_timer_override;
+extern int acpi_fix_pin2_polarity;
extern u8 acpi_sci_flags;
extern int acpi_sci_override_gsi;
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 5e3969c36d7..3c896946f4c 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -233,6 +233,7 @@ extern void sync_Arb_IDs(void);
extern void init_bsp_APIC(void);
extern void setup_local_APIC(void);
extern void end_local_APIC_setup(void);
+extern void bsp_end_local_APIC_setup(void);
extern void init_apic_mappings(void);
void register_lapic_address(unsigned long address);
extern void setup_boot_APIC_clock(void);
diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h
index 6e6e7558e70..4564c8e28a3 100644
--- a/arch/x86/include/asm/cpu.h
+++ b/arch/x86/include/asm/cpu.h
@@ -32,6 +32,6 @@ extern void arch_unregister_cpu(int);
DECLARE_PER_CPU(int, cpu_state);
-int __cpuinit mwait_usable(const struct cpuinfo_x86 *);
+int mwait_usable(const struct cpuinfo_x86 *);
#endif /* _ASM_X86_CPU_H */
diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
index 4a2d4e0c18d..8b5393ec108 100644
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -36,8 +36,6 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
unsigned cpu = smp_processor_id();
if (likely(prev != next)) {
- /* stop flush ipis for the previous mm */
- cpumask_clear_cpu(cpu, mm_cpumask(prev));
#ifdef CONFIG_SMP
percpu_write(cpu_tlbstate.state, TLBSTATE_OK);
percpu_write(cpu_tlbstate.active_mm, next);
@@ -47,6 +45,9 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
/* Re-load page tables */
load_cr3(next->pgd);
+ /* stop flush ipis for the previous mm */
+ cpumask_clear_cpu(cpu, mm_cpumask(prev));
+
/*
* load the LDT, if the LDT is different:
*/
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 4d0dfa0d998..43a18c77676 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -36,6 +36,11 @@
#define MSR_IA32_PERFCTR1 0x000000c2
#define MSR_FSB_FREQ 0x000000cd
+#define MSR_NHM_SNB_PKG_CST_CFG_CTL 0x000000e2
+#define NHM_C3_AUTO_DEMOTE (1UL << 25)
+#define NHM_C1_AUTO_DEMOTE (1UL << 26)
+#define ATM_LNC_C6_AUTO_DEMOTE (1UL << 25)
+
#define MSR_MTRRcap 0x000000fe
#define MSR_IA32_BBL_CR_CTL 0x00000119
diff --git a/arch/x86/include/asm/perf_event_p4.h b/arch/x86/include/asm/perf_event_p4.h
index e2f6a99f14a..cc29086e30c 100644
--- a/arch/x86/include/asm/perf_event_p4.h
+++ b/arch/x86/include/asm/perf_event_p4.h
@@ -22,6 +22,7 @@
#define ARCH_P4_CNTRVAL_BITS (40)
#define ARCH_P4_CNTRVAL_MASK ((1ULL << ARCH_P4_CNTRVAL_BITS) - 1)
+#define ARCH_P4_UNFLAGGED_BIT ((1ULL) << (ARCH_P4_CNTRVAL_BITS - 1))
#define P4_ESCR_EVENT_MASK 0x7e000000U
#define P4_ESCR_EVENT_SHIFT 25
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index 4c2f63c7fc1..1f469513677 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -40,10 +40,7 @@ DECLARE_EARLY_PER_CPU(u16, x86_cpu_to_apicid);
DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid);
/* Static state in head.S used to set up a CPU */
-extern struct {
- void *sp;
- unsigned short ss;
-} stack_start;
+extern unsigned long stack_start; /* Initial stack pointer address */
struct smp_ops {
void (*smp_prepare_boot_cpu)(void);
diff --git a/arch/x86/include/asm/smpboot_hooks.h b/arch/x86/include/asm/smpboot_hooks.h
index 6c22bf353f2..725b7783199 100644
--- a/arch/x86/include/asm/smpboot_hooks.h
+++ b/arch/x86/include/asm/smpboot_hooks.h
@@ -34,7 +34,7 @@ static inline void smpboot_restore_warm_reset_vector(void)
*/
CMOS_WRITE(0, 0xf);
- *((volatile long *)phys_to_virt(apic->trampoline_phys_low)) = 0;
+ *((volatile u32 *)phys_to_virt(apic->trampoline_phys_low)) = 0;
}
static inline void __init smpboot_setup_io_apic(void)
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index b3a71137983..3e6e2d68f76 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -72,6 +72,7 @@ u8 acpi_sci_flags __initdata;
int acpi_sci_override_gsi __initdata;
int acpi_skip_timer_override __initdata;
int acpi_use_timer_override __initdata;
+int acpi_fix_pin2_polarity __initdata;
#ifdef CONFIG_X86_LOCAL_APIC
static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
@@ -415,10 +416,15 @@ acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
return 0;
}
- if (acpi_skip_timer_override &&
- intsrc->source_irq == 0 && intsrc->global_irq == 2) {
- printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
- return 0;
+ if (intsrc->source_irq == 0 && intsrc->global_irq == 2) {
+ if (acpi_skip_timer_override) {
+ printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
+ return 0;
+ }
+ if (acpi_fix_pin2_polarity && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
+ intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK;
+ printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n");
+ }
}
mp_override_legacy_irq(intsrc->source_irq,
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 69fd72aa559..68d1537b8c8 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -12,10 +12,8 @@
#include <linux/cpumask.h>
#include <asm/segment.h>
#include <asm/desc.h>
-
-#ifdef CONFIG_X86_32
#include <asm/pgtable.h>
-#endif
+#include <asm/cacheflush.h>
#include "realmode/wakeup.h"
#include "sleep.h"
@@ -100,7 +98,7 @@ int acpi_save_state_mem(void)
#else /* CONFIG_64BIT */
header->trampoline_segment = setup_trampoline() >> 4;
#ifdef CONFIG_SMP
- stack_start.sp = temp_stack + sizeof(temp_stack);
+ stack_start = (unsigned long)temp_stack + sizeof(temp_stack);
early_gdt_descr.address =
(unsigned long)get_cpu_gdt_table(smp_processor_id());
initial_gs = per_cpu_offset(smp_processor_id());
@@ -149,6 +147,15 @@ void __init acpi_reserve_wakeup_memory(void)
memblock_x86_reserve_range(mem, mem + WAKEUP_SIZE, "ACPI WAKEUP");
}
+int __init acpi_configure_wakeup_memory(void)
+{
+ if (acpi_realmode)
+ set_memory_x(acpi_realmode, WAKEUP_SIZE >> PAGE_SHIFT);
+
+ return 0;
+}
+arch_initcall(acpi_configure_wakeup_memory);
+
static int __init acpi_sleep_setup(char *str)
{
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 123608531c8..7038b95d363 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -671,7 +671,7 @@ void __kprobes text_poke_smp_batch(struct text_poke_param *params, int n)
atomic_set(&stop_machine_first, 1);
wrote_text = 0;
- stop_machine(stop_machine_text_poke, (void *)&tpp, NULL);
+ __stop_machine(stop_machine_text_poke, (void *)&tpp, NULL);
}
#if defined(CONFIG_DYNAMIC_FTRACE) || defined(HAVE_JUMP_LABEL)
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index 51ef31a89be..51d4e166306 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -284,7 +284,7 @@ static int __init apbt_clockevent_register(void)
memcpy(&adev->evt, &apbt_clockevent, sizeof(struct clock_event_device));
if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) {
- apbt_clockevent.rating = APBT_CLOCKEVENT_RATING - 100;
+ adev->evt.rating = APBT_CLOCKEVENT_RATING - 100;
global_clock_event = &adev->evt;
printk(KERN_DEBUG "%s clockevent registered as global\n",
global_clock_event->name);
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 06c196d7e59..76b96d74978 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1381,12 +1381,17 @@ void __cpuinit end_local_APIC_setup(void)
#endif
apic_pm_activate();
+}
+
+void __init bsp_end_local_APIC_setup(void)
+{
+ end_local_APIC_setup();
/*
* Now that local APIC setup is completed for BP, configure the fault
* handling for interrupt remapping.
*/
- if (!smp_processor_id() && intr_remapping_enabled)
+ if (intr_remapping_enabled)
enable_drhd_fault_handling();
}
@@ -1756,7 +1761,7 @@ int __init APIC_init_uniprocessor(void)
enable_IO_APIC();
#endif
- end_local_APIC_setup();
+ bsp_end_local_APIC_setup();
#ifdef CONFIG_X86_IO_APIC
if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 697dc34b7b8..ca9e2a3545a 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -4002,6 +4002,9 @@ int mp_find_ioapic(u32 gsi)
{
int i = 0;
+ if (nr_ioapics == 0)
+ return -1;
+
/* Find the IOAPIC that manages this GSI. */
for (i = 0; i < nr_ioapics; i++) {
if ((gsi >= mp_gsi_routing[i].gsi_base)
diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
index bd1cac747f6..52c93648e49 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
@@ -158,9 +158,9 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
{
if (c->x86 == 0x06) {
if (cpu_has(c, X86_FEATURE_EST))
- printk(KERN_WARNING PFX "Warning: EST-capable CPU "
- "detected. The acpi-cpufreq module offers "
- "voltage scaling in addition of frequency "
+ printk_once(KERN_WARNING PFX "Warning: EST-capable "
+ "CPU detected. The acpi-cpufreq module offers "
+ "voltage scaling in addition to frequency "
"scaling. You should use that instead of "
"p4-clockmod, if possible.\n");
switch (c->x86_model) {
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 35c7e65e59b..c567dec854f 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -1537,6 +1537,7 @@ static struct notifier_block cpb_nb = {
static int __cpuinit powernowk8_init(void)
{
unsigned int i, supported_cpus = 0, cpu;
+ int rv;
for_each_online_cpu(i) {
int rc;
@@ -1555,14 +1556,14 @@ static int __cpuinit powernowk8_init(void)
cpb_capable = true;
- register_cpu_notifier(&cpb_nb);
-
msrs = msrs_alloc();
if (!msrs) {
printk(KERN_ERR "%s: Error allocating msrs!\n", __func__);
return -ENOMEM;
}
+ register_cpu_notifier(&cpb_nb);
+
rdmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs);
for_each_cpu(cpu, cpu_online_mask) {
@@ -1574,7 +1575,13 @@ static int __cpuinit powernowk8_init(void)
(cpb_enabled ? "on" : "off"));
}
- return cpufreq_register_driver(&cpufreq_amd64_driver);
+ rv = cpufreq_register_driver(&cpufreq_amd64_driver);
+ if (rv < 0 && boot_cpu_has(X86_FEATURE_CPB)) {
+ unregister_cpu_notifier(&cpb_nb);
+ msrs_free(msrs);
+ msrs = NULL;
+ }
+ return rv;
}
/* driver entry point for term */
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 01c0f3ee6cc..bebabec5b44 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -793,13 +793,21 @@ void set_mtrr_aps_delayed_init(void)
}
/*
- * MTRR initialization for all AP's
+ * Delayed MTRR initialization for all AP's
*/
void mtrr_aps_init(void)
{
if (!use_intel())
return;
+ /*
+ * Check if someone has requested the delay of AP MTRR initialization,
+ * by doing set_mtrr_aps_delayed_init(), prior to this point. If not,
+ * then we are done.
+ */
+ if (!mtrr_aps_delayed_init)
+ return;
+
set_mtrr(~0U, 0, 0, 0);
mtrr_aps_delayed_init = false;
}
diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c
index e56b9bfbabd..ff751a9f182 100644
--- a/arch/x86/kernel/cpu/perf_event_p4.c
+++ b/arch/x86/kernel/cpu/perf_event_p4.c
@@ -682,7 +682,7 @@ static int p4_validate_raw_event(struct perf_event *event)
* if an event is shared accross the logical threads
* the user needs special permissions to be able to use it
*/
- if (p4_event_bind_map[v].shared) {
+ if (p4_ht_active() && p4_event_bind_map[v].shared) {
if (perf_paranoid_cpu() && !capable(CAP_SYS_ADMIN))
return -EACCES;
}
@@ -727,7 +727,8 @@ static int p4_hw_config(struct perf_event *event)
event->hw.config = p4_set_ht_bit(event->hw.config);
if (event->attr.type == PERF_TYPE_RAW) {
-
+ struct p4_event_bind *bind;
+ unsigned int esel;
/*
* Clear bits we reserve to be managed by kernel itself
* and never allowed from a user space
@@ -743,6 +744,13 @@ static int p4_hw_config(struct perf_event *event)
* bits since we keep additional info here (for cache events and etc)
*/
event->hw.config |= event->attr.config;
+ bind = p4_config_get_bind(event->attr.config);
+ if (!bind) {
+ rc = -EINVAL;
+ goto out;
+ }
+ esel = P4_OPCODE_ESEL(bind->opcode);
+ event->hw.config |= p4_config_pack_cccr(P4_CCCR_ESEL(esel));
}
rc = x86_setup_perfctr(event);
@@ -762,9 +770,14 @@ static inline int p4_pmu_clear_cccr_ovf(struct hw_perf_event *hwc)
return 1;
}
- /* it might be unflagged overflow */
- rdmsrl(hwc->event_base + hwc->idx, v);
- if (!(v & ARCH_P4_CNTRVAL_MASK))
+ /*
+ * In some circumstances the overflow might issue an NMI but did
+ * not set P4_CCCR_OVF bit. Because a counter holds a negative value
+ * we simply check for high bit being set, if it's cleared it means
+ * the counter has reached zero value and continued counting before
+ * real NMI signal was received:
+ */
+ if (!(v & ARCH_P4_UNFLAGGED_BIT))
return 1;
return 0;
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index 76b8cd953de..9efbdcc5642 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -143,15 +143,10 @@ static void __init ati_bugs(int num, int slot, int func)
static u32 __init ati_sbx00_rev(int num, int slot, int func)
{
- u32 old, d;
+ u32 d;
- d = read_pci_config(num, slot, func, 0x70);
- old = d;
- d &= ~(1<<8);
- write_pci_config(num, slot, func, 0x70, d);
d = read_pci_config(num, slot, func, 0x8);
d &= 0xff;
- write_pci_config(num, slot, func, 0x70, old);
return d;
}
@@ -160,13 +155,16 @@ static void __init ati_bugs_contd(int num, int slot, int func)
{
u32 d, rev;
- if (acpi_use_timer_override)
- return;
-
rev = ati_sbx00_rev(num, slot, func);
+ if (rev >= 0x40)
+ acpi_fix_pin2_polarity = 1;
+
if (rev > 0x13)
return;
+ if (acpi_use_timer_override)
+ return;
+
/* check for IRQ0 interrupt swap */
d = read_pci_config(num, slot, func, 0x64);
if (!(d & (1<<14)))
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index fc293dc8dc3..767d6c43de3 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -85,6 +85,8 @@ RESERVE_BRK(pagetables, INIT_MAP_SIZE)
*/
__HEAD
ENTRY(startup_32)
+ movl pa(stack_start),%ecx
+
/* test KEEP_SEGMENTS flag to see if the bootloader is asking
us to not reload segments */
testb $(1<<6), BP_loadflags(%esi)
@@ -99,7 +101,9 @@ ENTRY(startup_32)
movl %eax,%es
movl %eax,%fs
movl %eax,%gs
+ movl %eax,%ss
2:
+ leal -__PAGE_OFFSET(%ecx),%esp
/*
* Clear BSS first so that there are no surprises...
@@ -145,8 +149,6 @@ ENTRY(startup_32)
* _brk_end is set up to point to the first "safe" location.
* Mappings are created both at virtual address 0 (identity mapping)
* and PAGE_OFFSET for up to _end.
- *
- * Note that the stack is not yet set up!
*/
#ifdef CONFIG_X86_PAE
@@ -282,6 +284,9 @@ ENTRY(startup_32_smp)
movl %eax,%es
movl %eax,%fs
movl %eax,%gs
+ movl pa(stack_start),%ecx
+ movl %eax,%ss
+ leal -__PAGE_OFFSET(%ecx),%esp
#endif /* CONFIG_SMP */
default_entry:
@@ -347,8 +352,8 @@ default_entry:
movl %eax,%cr0 /* ..and set paging (PG) bit */
ljmp $__BOOT_CS,$1f /* Clear prefetch and normalize %eip */
1:
- /* Set up the stack pointer */
- lss stack_start,%esp
+ /* Shift the stack pointer to a virtual address */
+ addl $__PAGE_OFFSET, %esp
/*
* Initialize eflags. Some BIOS's leave bits like NT set. This would
@@ -360,9 +365,7 @@ default_entry:
#ifdef CONFIG_SMP
cmpb $0, ready
- jz 1f /* Initial CPU cleans BSS */
- jmp checkCPUtype
-1:
+ jnz checkCPUtype
#endif /* CONFIG_SMP */
/*
@@ -470,14 +473,7 @@ is386: movl $2,%ecx # set MP
cld # gcc2 wants the direction flag cleared at all times
pushl $0 # fake return address for unwinder
-#ifdef CONFIG_SMP
- movb ready, %cl
movb $1, ready
- cmpb $0,%cl # the first CPU calls start_kernel
- je 1f
- movl (stack_start), %esp
-1:
-#endif /* CONFIG_SMP */
jmp *(initial_code)
/*
@@ -670,15 +666,15 @@ ENTRY(initial_page_table)
#endif
.data
+.balign 4
ENTRY(stack_start)
.long init_thread_union+THREAD_SIZE
- .long __BOOT_DS
-
-ready: .byte 0
early_recursion_flag:
.long 0
+ready: .byte 0
+
int_msg:
.asciz "Unknown interrupt or fault at: %p %p %p\n"
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 52945da52a9..387b6a0c9e8 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -367,7 +367,8 @@ void fixup_irqs(void)
if (irr & (1 << (vector % 32))) {
irq = __this_cpu_read(vector_irq[vector]);
- data = irq_get_irq_data(irq);
+ desc = irq_to_desc(irq);
+ data = &desc->irq_data;
raw_spin_lock(&desc->lock);
if (data->chip->irq_retrigger)
data->chip->irq_retrigger(data);
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index e764fc05d70..ff455419898 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -92,21 +92,31 @@ void show_regs(struct pt_regs *regs)
void show_regs_common(void)
{
- const char *board, *product;
+ const char *vendor, *product, *board;
- board = dmi_get_system_info(DMI_BOARD_NAME);
- if (!board)
- board = "";
+ vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+ if (!vendor)
+ vendor = "";
product = dmi_get_system_info(DMI_PRODUCT_NAME);
if (!product)
product = "";
+ /* Board Name is optional */
+ board = dmi_get_system_info(DMI_BOARD_NAME);
+
printk(KERN_CONT "\n");
- printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n",
+ printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s",
current->pid, current->comm, print_tainted(),
init_utsname()->release,
(int)strcspn(init_utsname()->version, " "),
- init_utsname()->version, board, product);
+ init_utsname()->version);
+ printk(KERN_CONT " ");
+ printk(KERN_CONT "%s %s", vendor, product);
+ if (board) {
+ printk(KERN_CONT "/");
+ printk(KERN_CONT "%s", board);
+ }
+ printk(KERN_CONT "\n");
}
void flush_thread(void)
@@ -506,7 +516,7 @@ static void poll_idle(void)
#define MWAIT_ECX_EXTENDED_INFO 0x01
#define MWAIT_EDX_C1 0xf0
-int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
+int mwait_usable(const struct cpuinfo_x86 *c)
{
u32 eax, ebx, ecx, edx;
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index fc7aae1e2bc..715037caeb4 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -285,6 +285,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
DMI_MATCH(DMI_BOARD_NAME, "P4S800"),
},
},
+ { /* Handle problems with rebooting on VersaLogic Menlow boards */
+ .callback = set_bios_reboot,
+ .ident = "VersaLogic Menlow based board",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "VersaLogic Corporation"),
+ DMI_MATCH(DMI_BOARD_NAME, "VersaLogic Menlow board"),
+ },
+ },
{ }
};
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 0cbe8c0b35e..08776a95348 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -638,7 +638,7 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
* target processor state.
*/
startup_ipi_hook(phys_apicid, (unsigned long) start_secondary,
- (unsigned long)stack_start.sp);
+ stack_start);
/*
* Run STARTUP IPI loop.
@@ -785,7 +785,7 @@ do_rest:
#endif
early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
initial_code = (unsigned long)start_secondary;
- stack_start.sp = (void *) c_idle.idle->thread.sp;
+ stack_start = c_idle.idle->thread.sp;
/* start_ip had better be page-aligned! */
start_ip = setup_trampoline();
@@ -1060,7 +1060,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
connect_bsp_APIC();
setup_local_APIC();
- end_local_APIC_setup();
+ bsp_end_local_APIC_setup();
return -1;
}
@@ -1137,7 +1137,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
if (!skip_ioapic_setup && nr_ioapics)
enable_IO_APIC();
- end_local_APIC_setup();
+ bsp_end_local_APIC_setup();
map_cpu_to_logical_apicid();
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 25bd1bc5aad..63fec1531e8 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1150,8 +1150,8 @@ static void svm_vcpu_put(struct kvm_vcpu *vcpu)
kvm_load_ldt(svm->host.ldt);
#ifdef CONFIG_X86_64
loadsegment(fs, svm->host.fs);
- load_gs_index(svm->host.gs);
wrmsrl(MSR_KERNEL_GS_BASE, current->thread.gs);
+ load_gs_index(svm->host.gs);
#else
loadsegment(gs, svm->host.gs);
#endif
@@ -2777,6 +2777,8 @@ static int dr_interception(struct vcpu_svm *svm)
kvm_register_write(&svm->vcpu, reg, val);
}
+ skip_emulated_instruction(&svm->vcpu);
+
return 1;
}
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 8b830ca14ac..d343b3c81f3 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -256,7 +256,6 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address,
unsigned long pfn)
{
pgprot_t forbidden = __pgprot(0);
- pgprot_t required = __pgprot(0);
/*
* The BIOS area between 640k and 1Mb needs to be executable for
@@ -282,12 +281,6 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address,
if (within(pfn, __pa((unsigned long)__start_rodata) >> PAGE_SHIFT,
__pa((unsigned long)__end_rodata) >> PAGE_SHIFT))
pgprot_val(forbidden) |= _PAGE_RW;
- /*
- * .data and .bss should always be writable.
- */
- if (within(address, (unsigned long)_sdata, (unsigned long)_edata) ||
- within(address, (unsigned long)__bss_start, (unsigned long)__bss_stop))
- pgprot_val(required) |= _PAGE_RW;
#if defined(CONFIG_X86_64) && defined(CONFIG_DEBUG_RODATA)
/*
@@ -327,7 +320,6 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address,
#endif
prot = __pgprot(pgprot_val(prot) & ~pgprot_val(forbidden));
- prot = __pgprot(pgprot_val(prot) | pgprot_val(required));
return prot;
}
diff --git a/arch/x86/platform/olpc/olpc_dt.c b/arch/x86/platform/olpc/olpc_dt.c
index dab87464753..044bda5b317 100644
--- a/arch/x86/platform/olpc/olpc_dt.c
+++ b/arch/x86/platform/olpc/olpc_dt.c
@@ -140,8 +140,7 @@ void * __init prom_early_alloc(unsigned long size)
* wasted bootmem) and hand off chunks of it to callers.
*/
res = alloc_bootmem(chunk_size);
- if (!res)
- return NULL;
+ BUG_ON(!res);
prom_early_allocated += chunk_size;
memset(res, 0, chunk_size);
free_mem = chunk_size;