15 files changed, 3434 insertions, 2 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 08b7cc900ca..f47cf9af3bc 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -270,6 +270,11 @@ config ARCH_AT91RM9200
 	  Say Y here if you intend to run this kernel on an Atmel
 	  AT91RM9200-based board.
 
+config ARCH_PNX4008
+	bool "Philips Nexperia PNX4008 Mobile"
+	help
+	  This enables support for Philips PNX4008 mobile platform.
+
 endchoice
 
 source "arch/arm/mach-clps711x/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 6f8e84c1c1f..6c97aa70d3b 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -116,6 +116,7 @@ endif
  machine-$(CONFIG_ARCH_REALVIEW)   := realview
  machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200
  machine-$(CONFIG_ARCH_EP93XX)     := ep93xx
+ machine-$(CONFIG_ARCH_PNX4008)    := pnx4008
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/mach-pnx4008/Makefile b/arch/arm/mach-pnx4008/Makefile
new file mode 100644
index 00000000000..b457ca0a431
--- /dev/null
+++ b/arch/arm/mach-pnx4008/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y			:= core.o irq.o time.o clock.o gpio.o serial.o dma.o
+obj-m			:=
+obj-n			:=
+obj-			:=
+
+# Power Management
+obj-$(CONFIG_PM) += pm.o sleep.o
+
diff --git a/arch/arm/mach-pnx4008/Makefile.boot b/arch/arm/mach-pnx4008/Makefile.boot
new file mode 100644
index 00000000000..44c7117e20d
--- /dev/null
+++ b/arch/arm/mach-pnx4008/Makefile.boot
@@ -0,0 +1,4 @@
+   zreladdr-y		:= 0x80008000
+params_phys-y		:= 0x80000100
+initrd_phys-y		:= 0x80800000
+
diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c
new file mode 100644
index 00000000000..285b22f631e
--- /dev/null
+++ b/arch/arm/mach-pnx4008/clock.c
@@ -0,0 +1,1010 @@
+/*
+ * arch/arm/mach-pnx4008/clock.c
+ *
+ * Clock control driver for PNX4008
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ * Generic clock management functions are partially based on:
+ *  linux/arch/arm/mach-omap/clock.c
+ *
+ * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+
+#include <asm/semaphore.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/arch/clock.h>
+#include "clock.h"
+
+/*forward declaration*/
+static struct clk per_ck;
+static struct clk hclk_ck;
+static struct clk ck_1MHz;
+static struct clk ck_13MHz;
+static struct clk ck_pll1;
+static int local_set_rate(struct clk *clk, u32 rate);
+
+static inline void clock_lock(void)
+{
+	local_irq_disable();
+}
+
+static inline void clock_unlock(void)
+{
+	local_irq_enable();
+}
+
+static void propagate_rate(struct clk *clk)
+{
+	struct clk *tmp_clk;
+
+	tmp_clk = clk;
+	while (tmp_clk->propagate_next) {
+		tmp_clk = tmp_clk->propagate_next;
+		local_set_rate(tmp_clk, tmp_clk->user_rate);
+	}
+}
+
+static inline void clk_reg_disable(struct clk *clk)
+{
+	if (clk->enable_reg)
+		__raw_writel(__raw_readl(clk->enable_reg) &
+			     ~(1 << clk->enable_shift), clk->enable_reg);
+}
+
+static inline void clk_reg_enable(struct clk *clk)
+{
+	if (clk->enable_reg)
+		__raw_writel(__raw_readl(clk->enable_reg) |
+			     (1 << clk->enable_shift), clk->enable_reg);
+}
+
+static inline void clk_reg_disable1(struct clk *clk)
+{
+	if (clk->enable_reg1)
+		__raw_writel(__raw_readl(clk->enable_reg1) &
+			     ~(1 << clk->enable_shift1), clk->enable_reg1);
+}
+
+static inline void clk_reg_enable1(struct clk *clk)
+{
+	if (clk->enable_reg1)
+		__raw_writel(__raw_readl(clk->enable_reg1) |
+			     (1 << clk->enable_shift1), clk->enable_reg1);
+}
+
+static int clk_wait_for_pll_lock(struct clk *clk)
+{
+	int i;
+	i = 0;
+	while (i++ < 0xFFF && !(__raw_readl(clk->scale_reg) & 1)) ;	/*wait for PLL to lock */
+
+	if (!(__raw_readl(clk->scale_reg) & 1)) {
+		printk(KERN_ERR
+		       "%s ERROR: failed to lock, scale reg data: %x\n",
+		       clk->name, __raw_readl(clk->scale_reg));
+		return -1;
+	}
+	return 0;
+}
+
+static int switch_to_dirty_13mhz(struct clk *clk)
+{
+	int i;
+	int ret;
+	u32 tmp_reg;
+
+	ret = 0;
+
+	if (!clk->rate)
+		clk_reg_enable1(clk);
+
+	tmp_reg = __raw_readl(clk->parent_switch_reg);
+	/*if 13Mhz clock selected, select 13'MHz (dirty) source from OSC */
+	if (!(tmp_reg & 1)) {
+		tmp_reg |= (1 << 1);	/* Trigger switch to 13'MHz (dirty) clock */
+		__raw_writel(tmp_reg, clk->parent_switch_reg);
+		i = 0;
+		while (i++ < 0xFFF && !(__raw_readl(clk->parent_switch_reg) & 1)) ;	/*wait for 13'MHz selection status */
+
+		if (!(__raw_readl(clk->parent_switch_reg) & 1)) {
+			printk(KERN_ERR
+			       "%s ERROR: failed to select 13'MHz, parent sw reg data: %x\n",
+			       clk->name, __raw_readl(clk->parent_switch_reg));
+			ret = -1;
+		}
+	}
+
+	if (!clk->rate)
+		clk_reg_disable1(clk);
+
+	return ret;
+}
+
+static int switch_to_clean_13mhz(struct clk *clk)
+{
+	int i;
+	int ret;
+	u32 tmp_reg;
+
+	ret = 0;
+
+	if (!clk->rate)
+		clk_reg_enable1(clk);
+
+	tmp_reg = __raw_readl(clk->parent_switch_reg);
+	/*if 13'Mhz clock selected, select 13MHz (clean) source from OSC */
+	if (tmp_reg & 1) {
+		tmp_reg &= ~(1 << 1);	/* Trigger switch to 13MHz (clean) clock */
+		__raw_writel(tmp_reg, clk->parent_switch_reg);
+		i = 0;
+		while (i++ < 0xFFF && (__raw_readl(clk->parent_switch_reg) & 1)) ;	/*wait for 13MHz selection status */
+
+		if (__raw_readl(clk->parent_switch_reg) & 1) {
+			printk(KERN_ERR
+			       "%s ERROR: failed to select 13MHz, parent sw reg data: %x\n",
+			       clk->name, __raw_readl(clk->parent_switch_reg));
+			ret = -1;
+		}
+	}
+
+	if (!clk->rate)
+		clk_reg_disable1(clk);
+
+	return ret;
+}
+
+static int set_13MHz_parent(struct clk *clk, struct clk *parent)
+{
+	int ret = -EINVAL;
+
+	if (parent == &ck_13MHz)
+		ret = switch_to_clean_13mhz(clk);
+	else if (parent == &ck_pll1)
+		ret = switch_to_dirty_13mhz(clk);
+
+	return ret;
+}
+
+#define PLL160_MIN_FCCO 156000
+#define PLL160_MAX_FCCO 320000
+
+/*
+ * Calculate pll160 settings.
+ * Possible input: up to 320MHz with step of clk->parent->rate.
+ * In PNX4008 parent rate for pll160s may be either 1 or 13MHz.
+ * Ignored paths: "feedback" (bit 13 set), "div-by-N".
+ * Setting ARM PLL4 rate to 0 will put CPU into direct run mode.
+ * Setting PLL5 and PLL3 rate to 0 will disable USB and DSP clock input.
+ * Please refer to PNX4008 IC manual for details.
+ */
+
+static int pll160_set_rate(struct clk *clk, u32 rate)
+{
+	u32 tmp_reg, tmp_m, tmp_2p, i;
+	u32 parent_rate;
+	int ret = -EINVAL;
+
+	parent_rate = clk->parent->rate;
+
+	if (!parent_rate)
+		goto out;
+
+	/* set direct run for ARM or disable output for others  */
+	clk_reg_disable(clk);
+
+	/* disable source input as well (ignored for ARM) */
+	clk_reg_disable1(clk);
+
+	tmp_reg = __raw_readl(clk->scale_reg);
+	tmp_reg &= ~0x1ffff;	/*clear all settings, power down */
+	__raw_writel(tmp_reg, clk->scale_reg);
+
+	rate -= rate % parent_rate;	/*round down the input */
+
+	if (rate > PLL160_MAX_FCCO)
+		rate = PLL160_MAX_FCCO;
+
+	if (!rate) {
+		clk->rate = 0;
+		ret = 0;
+		goto out;
+	}
+
+	clk_reg_enable1(clk);
+	tmp_reg = __raw_readl(clk->scale_reg);
+
+	if (rate == parent_rate) {
+		/*enter direct bypass mode */
+		tmp_reg |= ((1 << 14) | (1 << 15));
+		__raw_writel(tmp_reg, clk->scale_reg);
+		clk->rate = parent_rate;
+		clk_reg_enable(clk);
+		ret = 0;
+		goto out;
+	}
+
+	i = 0;
+	for (tmp_2p = 1; tmp_2p < 16; tmp_2p <<= 1) {
+		if (rate * tmp_2p >= PLL160_MIN_FCCO)
+			break;
+		i++;
+	}
+
+	if (tmp_2p > 1)
+		tmp_reg |= ((i - 1) << 11);
+	else
+		tmp_reg |= (1 << 14);	/*direct mode, no divide */
+
+	tmp_m = rate * tmp_2p;
+	tmp_m /= parent_rate;
+
+	tmp_reg |= (tmp_m - 1) << 1;	/*calculate M */
+	tmp_reg |= (1 << 16);	/*power up PLL */
+	__raw_writel(tmp_reg, clk->scale_reg);
+
+	if (clk_wait_for_pll_lock(clk) < 0) {
+		clk_reg_disable(clk);
+		clk_reg_disable1(clk);
+
+		tmp_reg = __raw_readl(clk->scale_reg);
+		tmp_reg &= ~0x1ffff;	/*clear all settings, power down */
+		__raw_writel(tmp_reg, clk->scale_reg);
+		clk->rate = 0;
+		ret = -EFAULT;
+		goto out;
+	}
+
+	clk->rate = (tmp_m * parent_rate) / tmp_2p;
+
+	if (clk->flags & RATE_PROPAGATES)
+		propagate_rate(clk);
+
+	clk_reg_enable(clk);
+	ret = 0;
+
+out:
+	return ret;
+}
+
+/*configure PER_CLK*/
+static int per_clk_set_rate(struct clk *clk, u32 rate)
+{
+	u32 tmp;
+
+	tmp = __raw_readl(clk->scale_reg);
+	tmp &= ~(0x1f << 2);
+	tmp |= ((clk->parent->rate / clk->rate) - 1) << 2;
+	__raw_writel(tmp, clk->scale_reg);
+	clk->rate = rate;
+	return 0;
+}
+
+/*configure HCLK*/
+static int hclk_set_rate(struct clk *clk, u32 rate)
+{
+	u32 tmp;
+	tmp = __raw_readl(clk->scale_reg);
+	tmp = tmp & ~0x3;
+	switch (rate) {
+	case 1:
+		break;
+	case 2:
+		tmp |= 1;
+		break;
+	case 4:
+		tmp |= 2;
+		break;
+	}
+
+	__raw_writel(tmp, clk->scale_reg);
+	clk->rate = rate;
+	return 0;
+}
+
+static u32 hclk_round_rate(struct clk *clk, u32 rate)
+{
+	switch (rate) {
+	case 1:
+	case 4:
+		return rate;
+	}
+	return 2;
+}
+
+static u32 per_clk_round_rate(struct clk *clk, u32 rate)
+{
+	return CLK_RATE_13MHZ;
+}
+
+static int on_off_set_rate(struct clk *clk, u32 rate)
+{
+	if (rate) {
+		clk_reg_enable(clk);
+		clk->rate = 1;
+	} else {
+		clk_reg_disable(clk);
+		clk->rate = 0;
+	}
+	return 0;
+}
+
+static int on_off_inv_set_rate(struct clk *clk, u32 rate)
+{
+	if (rate) {
+		clk_reg_disable(clk);	/*enable bit is inverted */
+		clk->rate = 1;
+	} else {
+		clk_reg_enable(clk);
+		clk->rate = 0;
+	}
+	return 0;
+}
+
+static u32 on_off_round_rate(struct clk *clk, u32 rate)
+{
+	return (rate ? 1 : 0);
+}
+
+static u32 pll4_round_rate(struct clk *clk, u32 rate)
+{
+	if (rate > CLK_RATE_208MHZ)
+		rate = CLK_RATE_208MHZ;
+	if (rate == CLK_RATE_208MHZ && hclk_ck.user_rate == 1)
+		rate = CLK_RATE_208MHZ - CLK_RATE_13MHZ;
+	return (rate - (rate % (hclk_ck.user_rate * CLK_RATE_13MHZ)));
+}
+
+static u32 pll3_round_rate(struct clk *clk, u32 rate)
+{
+	if (rate > CLK_RATE_208MHZ)
+		rate = CLK_RATE_208MHZ;
+	return (rate - rate % CLK_RATE_13MHZ);
+}
+
+static u32 pll5_round_rate(struct clk *clk, u32 rate)
+{
+	return (rate ? CLK_RATE_48MHZ : 0);
+}
+
+static u32 ck_13MHz_round_rate(struct clk *clk, u32 rate)
+{
+	return (rate ? CLK_RATE_13MHZ : 0);
+}
+
+static int ck_13MHz_set_rate(struct clk *clk, u32 rate)
+{
+	if (rate) {
+		clk_reg_disable(clk);	/*enable bit is inverted */
+		udelay(500);
+		clk->rate = CLK_RATE_13MHZ;
+		ck_1MHz.rate = CLK_RATE_1MHZ;
+	} else {
+		clk_reg_enable(clk);
+		clk->rate = 0;
+		ck_1MHz.rate = 0;
+	}
+	return 0;
+}
+
+static int pll1_set_rate(struct clk *clk, u32 rate)
+{
+#if 0 /* doesn't work on some boards, probably a HW BUG */
+	if (rate) {
+		clk_reg_disable(clk);	/*enable bit is inverted */
+		if (!clk_wait_for_pll_lock(clk)) {
+			clk->rate = CLK_RATE_13MHZ;
+		} else {
+			clk_reg_enable(clk);
+			clk->rate = 0;
+		}
+
+	} else {
+		clk_reg_enable(clk);
+		clk->rate = 0;
+	}
+#endif
+	return 0;
+}
+
+/* Clock sources */
+
+static struct clk osc_13MHz = {
+	.name = "osc_13MHz",
+	.flags = FIXED_RATE,
+	.rate = CLK_RATE_13MHZ,
+};
+
+static struct clk ck_13MHz = {
+	.name = "ck_13MHz",
+	.parent = &osc_13MHz,
+	.flags = NEEDS_INITIALIZATION,
+	.round_rate = &ck_13MHz_round_rate,
+	.set_rate = &ck_13MHz_set_rate,
+	.enable_reg = OSC13CTRL_REG,
+	.enable_shift = 0,
+	.rate = CLK_RATE_13MHZ,
+};
+
+static struct clk osc_32KHz = {
+	.name = "osc_32KHz",
+	.flags = FIXED_RATE,
+	.rate = CLK_RATE_32KHZ,
+};
+
+/*attached to PLL5*/
+static struct clk ck_1MHz = {
+	.name = "ck_1MHz",
+	.flags = FIXED_RATE | PARENT_SET_RATE,
+	.parent = &ck_13MHz,
+};
+
+/* PLL1 (397) - provides 13' MHz clock */
+static struct clk ck_pll1 = {
+	.name = "ck_pll1",
+	.parent = &osc_32KHz,
+	.flags = NEEDS_INITIALIZATION,
+	.round_rate = &ck_13MHz_round_rate,
+	.set_rate = &pll1_set_rate,
+	.enable_reg = PLLCTRL_REG,
+	.enable_shift = 1,
+	.scale_reg = PLLCTRL_REG,
+	.rate = CLK_RATE_13MHZ,
+};
+
+/* CPU/Bus PLL */
+static struct clk ck_pll4 = {
+	.name = "ck_pll4",
+	.parent = &ck_pll1,
+	.flags = RATE_PROPAGATES | NEEDS_INITIALIZATION,
+	.propagate_next = &per_ck,
+	.round_rate = &pll4_round_rate,
+	.set_rate = &pll160_set_rate,
+	.rate = CLK_RATE_208MHZ,
+	.scale_reg = HCLKPLLCTRL_REG,
+	.enable_reg = PWRCTRL_REG,
+	.enable_shift = 2,
+	.parent_switch_reg = SYSCLKCTRL_REG,
+	.set_parent = &set_13MHz_parent,
+};
+
+/* USB PLL */
+static struct clk ck_pll5 = {
+	.name = "ck_pll5",
+	.parent = &ck_1MHz,
+	.flags = NEEDS_INITIALIZATION,
+	.round_rate = &pll5_round_rate,
+	.set_rate = &pll160_set_rate,
+	.scale_reg = USBCTRL_REG,
+	.enable_reg = USBCTRL_REG,
+	.enable_shift = 18,
+	.enable_reg1 = USBCTRL_REG,
+	.enable_shift1 = 17,
+};
+
+/* XPERTTeak DSP PLL */
+static struct clk ck_pll3 = {
+	.name = "ck_pll3",
+	.parent = &ck_pll1,
+	.flags = NEEDS_INITIALIZATION,
+	.round_rate = &pll3_round_rate,
+	.set_rate = &pll160_set_rate,
+	.scale_reg = DSPPLLCTRL_REG,
+	.enable_reg = DSPCLKCTRL_REG,
+	.enable_shift = 3,
+	.enable_reg1 = DSPCLKCTRL_REG,
+	.enable_shift1 = 2,
+	.parent_switch_reg = DSPCLKCTRL_REG,
+	.set_parent = &set_13MHz_parent,
+};
+
+static struct clk hclk_ck = {
+	.name = "hclk_ck",
+	.parent = &ck_pll4,
+	.flags = PARENT_SET_RATE,
+	.set_rate = &hclk_set_rate,
+	.round_rate = &hclk_round_rate,
+	.scale_reg = HCLKDIVCTRL_REG,
+	.rate = 2,
+	.user_rate = 2,
+};
+
+static struct clk per_ck = {
+	.name = "per_ck",
+	.parent = &ck_pll4,
+	.flags = FIXED_RATE,
+	.propagate_next = &hclk_ck,
+	.set_rate = &per_clk_set_rate,
+	.round_rate = &per_clk_round_rate,
+	.scale_reg = HCLKDIVCTRL_REG,
+	.rate = CLK_RATE_13MHZ,
+	.user_rate = CLK_RATE_13MHZ,
+};
+
+static struct clk m2hclk_ck = {
+	.name = "m2hclk_ck",
+	.parent = &hclk_ck,
+	.flags = NEEDS_INITIALIZATION,
+	.round_rate = &on_off_round_rate,
+	.set_rate = &on_off_inv_set_rate,
+	.rate = 1,
+	.enable_shift = 6,
+	.enable_reg = PWRCTRL_REG,
+};
+
+static struct clk vfp9_ck = {
+	.name = "vfp9_ck",
+	.parent = &ck_pll4,
+	.flags = NEEDS_INITIALIZATION,
+	.round_rate = &on_off_round_rate,
+	.set_rate = &on_off_set_rate,
+	.rate = 1,
+	.enable_shift = 4,
+	.enable_reg = VFP9CLKCTRL_REG,
+};
+
+static struct clk keyscan_ck = {
+	.name = "keyscan_ck",
+	.parent = &osc_32KHz,
+	.flags = NEEDS_INITIALIZATION,
+	.round_rate = &on_off_round_rate,
+	.set_rate = &on_off_set_rate,
+	.enable_shift = 0,
+	.enable_reg = KEYCLKCTRL_REG,
+};
+
+static struct clk touch_ck = {
+	.name = "touch_ck",
+	.parent = &osc_32KHz,
+	.flags = NEEDS_INITIALIZATION,
+	.round_rate = &on_off_round_rate,
+	.set_rate = &on_off_set_rate,
+	.enable_shift = 0,
+	.enable_reg = TSCLKCTRL_REG,
+};
+
+static struct clk pwm1_ck = {
+	.name = "pwm1_ck",
+	.parent = &osc_32KHz,
+	.flags = NEEDS_INITIALIZATION,
+	.round_rate = &on_off_round_rate,
+	.set_rate = &on_off_set_rate,
+	.enable_shift = 0,
+	.enable_reg = PWMCLKCTRL_REG,
+};
+
+static struct clk pwm2_ck = {
+	.name = "pwm2_ck",
+	.parent = &osc_32KHz,
+	.flags = NEEDS_INITIALIZATION,
+	.round_rate = &on_off_round_rate,
+	.set_rate = &on_off_set_rate,
+	.enable_shift = 2,
+	.enable_reg = PWMCLKCTRL_REG,
+};
+
+static struct clk jpeg_ck = {
+	.name = "jpeg_ck",
+	.parent = &hclk_ck,
+	.flags = NEEDS_INITIALIZATION,
+	.round_rate = &on_off_round_rate,
+	.set_rate = &on_off_set_rate,
+	.enable_shift = 0,
+	.enable_reg = JPEGCLKCTRL_REG,
+};
+
+static struct clk ms_ck = {
+	.name = "ms_ck",
+	.parent = &ck_pll4,
+	.flags = NEEDS_INITIALIZATION,
+	.round_rate = &on_off_round_rate,
+	.set_rate = &on_off_set_rate,
+	.enable_shift = 5,
+	.enable_reg = MSCTRL_REG,
+};
+
+static struct clk dum_ck = {
+	.name = "dum_ck",
+	.parent = &hclk_ck,
+	.flags = NEEDS_INITIALIZATION,
+	.round_rate = &on_off_round_rate,
+	.set_rate = &on_off_set_rate,
+	.enable_shift = 0,
+	.enable_reg = DUMCLKCTRL_REG,
+};
+
+static struct clk flash_ck = {
+	.name = "flash_ck",
+	.parent = &hclk_ck,
+	.round_rate = &on_off_round_rate,
+	.set_rate = &on_off_set_rate,
+	.enable_shift = 1,	/* Only MLC clock supported */
+	.enable_reg = FLASHCLKCTRL_REG,
+};
+
+static struct clk i2c0_ck = {
+	.name = "i2c0_ck",
+	.parent = &per_ck,
+	.flags = NEEDS_INITIALIZATION,
+	.round_rate = &on_off_round_rate,
+	.set_rate = &on_off_set_rate,
+	.enable_shift = 0,
+	.enable_reg = I2CCLKCTRL_REG,
+};
+
+static struct clk i2c1_ck = {
+	.name = "i2c1_ck",
+	.parent = &per_ck,
+	.flags = NEEDS_INITIALIZATION,
+	.round_rate = &on_off_round_rate,
+	.set_rate = &on_off_set_rate,
+	.enable_shift = 1,
+	.enable_reg = I2CCLKCTRL_REG,
+};
+
+static struct clk i2c2_ck = {
+	.name = "i2c2_ck",
+	.parent = &per_ck,
+	.flags = NEEDS_INITIALIZATION,
+	.round_rate = &on_off_round_rate,
+	.set_rate = &on_off_set_rate,
+	.enable_shift = 2,
+	.enable_reg = USB_OTG_CLKCTRL_REG,
+};
+
+static struct clk spi0_ck = {
+	.name = "spi0_ck",
+	.parent = &hclk_ck,
+	.flags = NEEDS_INITIALIZATION,
+	.round_rate = &on_off_round_rate,
+	.set_rate = &on_off_set_rate,
+	.enable_shift = 0,
+	.enable_reg = SPICTRL_REG,
+};
+
+static struct clk spi1_ck = {
+	.name = "spi1_ck",
+	.parent = &hclk_ck,
+	.flags = NEEDS_INITIALIZATION,
+	.round_rate = &on_off_round_rate,
+	.set_rate = &on_off_set_rate,
+	.enable_shift = 4,
+	.enable_reg = SPICTRL_REG,
+};
+
+static struct clk dma_ck = {
+	.name = "dma_ck",
+	.parent = &hclk_ck,
+	.round_rate = &on_off_round_rate,
+	.set_rate = &on_off_set_rate,
+	.enable_shift = 0,
+	.enable_reg = DMACLKCTRL_REG,
+};
+
+static struct clk uart3_ck = {
+	.name = "uart3_ck",
+	.parent = &per_ck,
+	.flags = NEEDS_INITIALIZATION,
+	.round_rate = &on_off_round_rate,
+	.set_rate = &on_off_set_rate,
+	.rate = 1,
+	.enable_shift = 0,
+	.enable_reg = UARTCLKCTRL_REG,
+};
+
+static struct clk uart4_ck = {
+	.name = "uart4_ck",
+	.parent = &per_ck,
+	.flags = NEEDS_INITIALIZATION,
+	.round_rate = &on_off_round_rate,
+	.set_rate = &on_off_set_rate,
+	.enable_shift = 1,
+	.enable_reg = UARTCLKCTRL_REG,
+};
+
+static struct clk uart5_ck = {
+	.name = "uart5_ck",
+	.parent = &per_ck,
+	.flags = NEEDS_INITIALIZATION,
+	.round_rate = &on_off_round_rate,
+	.set_rate = &on_off_set_rate,
+	.rate = 1,
+	.enable_shift = 2,
+	.enable_reg = UARTCLKCTRL_REG,
+};
+
+static struct clk uart6_ck = {
+	.name = "uart6_ck",
+	.parent = &per_ck,
+	.flags = NEEDS_INITIALIZATION,
+	.round_rate = &on_off_round_rate,
+	.set_rate = &on_off_set_rate,
+	.enable_shift = 3,
+	.enable_reg = UARTCLKCTRL_REG,
+};
+
+/* These clocks are visible outside this module
+ * and can be initialized
+ */
+static struct clk *onchip_clks[] = {
+	&ck_13MHz,
+	&ck_pll1,
+	&ck_pll4,
+	&ck_pll5,
+	&ck_pll3,
+	&vfp9_ck,
+	&m2hclk_ck,
+	&hclk_ck,
+	&dma_ck,
+	&flash_ck,
+	&dum_ck,
+	&keyscan_ck,
+	&pwm1_ck,
+	&pwm2_ck,
+	&jpeg_ck,
+	&ms_ck,
+	&touch_ck,
+	&i2c0_ck,
+	&i2c1_ck,
+	&i2c2_ck,
+	&spi0_ck,
+	&spi1_ck,
+	&uart3_ck,
+	&uart4_ck,
+	&uart5_ck,
+	&uart6_ck,
+};
+
+static int local_set_rate(struct clk *clk, u32 rate)
+{
+	int ret = -EINVAL;
+	if (clk->set_rate) {
+
+		if (clk->user_rate == clk->rate && clk->parent->rate) {
+			/* if clock enabled or rate not set */
+			clk->user_rate = clk->round_rate(clk, rate);
+			ret = clk->set_rate(clk, clk->user_rate);
+		} else
+			clk->user_rate = clk->round_rate(clk, rate);
+		ret = 0;
+	}
+	return ret;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret = -EINVAL;
+
+	if (clk->flags & FIXED_RATE)
+		goto out;
+
+	clock_lock();
+	if ((clk->flags & PARENT_SET_RATE) && clk->parent) {
+
+		clk->user_rate = clk->round_rate(clk, rate);
+		/* parent clock needs to be refreshed
+		   for the setting to take effect */
+	} else {
+		ret = local_set_rate(clk, rate);
+	}
+	ret = 0;
+	clock_unlock();
+
+out:
+	return ret;
+}
+
+EXPORT_SYMBOL(clk_set_rate);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	struct clk *clk = ERR_PTR(-ENOENT);
+	struct clk **clkp;
+
+	clock_lock();
+	for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
+	     clkp++) {
+		if (strcmp(id, (*clkp)->name) == 0
+		    && try_module_get((*clkp)->owner)) {
+			clk = (*clkp);
+			break;
+		}
+	}
+	clock_unlock();
+
+	return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+	clock_lock();
+	if (clk && !IS_ERR(clk))
+		module_put(clk->owner);
+	clock_unlock();
+}
+EXPORT_SYMBOL(clk_put);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	unsigned long ret;
+	clock_lock();
+	ret = clk->rate;
+	clock_unlock();
+	return ret;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+static int local_clk_enable(struct clk *clk)
+{
+	int ret = 0;
+
+	if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate
+	    && clk->user_rate)
+		ret = clk->set_rate(clk, clk->user_rate);
+	return ret;
+}
+
+static void local_clk_disable(struct clk *clk)
+{
+	if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate)
+		clk->set_rate(clk, 0);
+}
+
+int clk_enable(struct clk *clk)
+{
+	int ret = 0;
+
+	clock_lock();
+	ret = local_clk_enable(clk);
+	clock_unlock();
+	return ret;
+}
+
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+	clock_lock();
+	local_clk_disable(clk);
+	clock_unlock();
+}
+
+EXPORT_SYMBOL(clk_disable);
+
+static void local_clk_unuse(struct clk *clk)
+{
+	if (clk->usecount > 0 && !(--clk->usecount)) {
+		local_clk_disable(clk);
+		if (clk->parent)
+			local_clk_unuse(clk->parent);
+	}
+}
+
+static int local_clk_use(struct clk *clk)
+{
+	int ret = 0;
+	if (clk->usecount++ == 0) {
+		if (clk->parent)
+			ret = local_clk_use(clk->parent);
+
+		if (ret != 0) {
+			clk->usecount--;
+			goto out;
+		}
+
+		ret = local_clk_enable(clk);
+
+		if (ret != 0 && clk->parent) {
+			local_clk_unuse(clk->parent);
+			clk->usecount--;
+		}
+	}
+out:
+	return ret;
+}
+
+/* The main purpose of clk_use ans clk_unuse functions
+ * is to control switching 13MHz oscillator and PLL1 (13'MHz),
+ * so that they are disabled whenever none of PLL2-5 is using them.
+ * Although in theory these functions should work with any clock,
+ * please use them only on PLL2 - PLL5 to avoid confusion.
+ */
+int clk_use(struct clk *clk)
+{
+	int ret = 0;
+
+	clock_lock();
+	ret = local_clk_use(clk);
+	clock_unlock();
+	return ret;
+}
+EXPORT_SYMBOL(clk_use);
+
+void clk_unuse(struct clk *clk)
+{
+
+	clock_lock();
+	local_clk_unuse(clk);
+	clock_unlock();
+}
+
+EXPORT_SYMBOL(clk_unuse);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	long ret;
+	clock_lock();
+	if (clk->round_rate)
+		ret = clk->round_rate(clk, rate);
+	else
+		ret = clk->rate;
+	clock_unlock();
+	return ret;
+}
+
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	int ret = -ENODEV;
+	if (!clk->set_parent)
+		goto out;
+
+	clock_lock();
+	ret = clk->set_parent(clk, parent);
+	if (!ret)
+		clk->parent = parent;
+	clock_unlock();
+
+out:
+	return ret;
+}
+
+EXPORT_SYMBOL(clk_set_parent);
+
+static int __init clk_init(void)
+{
+	struct clk **clkp;
+
+	/* Disable autoclocking, as it doesn't seem to work */
+	__raw_writel(0xff, AUTOCLK_CTRL);
+
+	for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
+	     clkp++) {
+		if (((*clkp)->flags & NEEDS_INITIALIZATION)
+		    && ((*clkp)->set_rate)) {
+			(*clkp)->user_rate = (*clkp)->rate;
+			local_set_rate((*clkp), (*clkp)->user_rate);
+			if ((*clkp)->set_parent)
+				(*clkp)->set_parent((*clkp), (*clkp)->parent);
+		}
+		pr_debug("%s: clock %s, rate %ld\n",
+			__FUNCTION__, (*clkp)->name, (*clkp)->rate);
+	}
+
+	clk_use(&ck_pll4);
+
+	/* if ck_13MHz is not used, disable it. */
+	if (ck_13MHz.usecount == 0)
+		local_clk_disable(&ck_13MHz);
+
+	/* Disable autoclocking */
+	__raw_writeb(0xff, AUTOCLK_CTRL);
+
+	return 0;
+}
+
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-pnx4008/clock.h b/arch/arm/mach-pnx4008/clock.h
new file mode 100644
index 00000000000..cd58f372cfd
--- /dev/null
+++ b/arch/arm/mach-pnx4008/clock.h
@@ -0,0 +1,43 @@
+/*
+ * arch/arm/mach-pnx4008/clock.h
+ *
+ * Clock control driver for PNX4008 - internal header file
+ *
+ * Author: Vitaly Wool <source@mvista.com>
+ *
+ * 2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ARCH_ARM_PNX4008_CLOCK_H__
+#define __ARCH_ARM_PNX4008_CLOCK_H__
+
+struct clk {
+	struct list_head node;
+	struct module *owner;
+	const char *name;
+	struct clk *parent;
+	struct clk *propagate_next;
+	u32 rate;
+	u32 user_rate;
+	s8 usecount;
+	u32 flags;
+	u32 scale_reg;
+	u8 enable_shift;
+	u32 enable_reg;
+	u8 enable_shift1;
+	u32 enable_reg1;
+	u32 parent_switch_reg;
+	 u32(*round_rate) (struct clk *, u32);
+	int (*set_rate) (struct clk *, u32);
+	int (*set_parent) (struct clk * clk, struct clk * parent);
+};
+
+/* Flags */
+#define RATE_PROPAGATES      (1<<0)
+#define NEEDS_INITIALIZATION (1<<1)
+#define PARENT_SET_RATE      (1<<2)
+#define FIXED_RATE           (1<<3)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
new file mode 100644
index 00000000000..ba91daad64f
--- /dev/null
+++ b/arch/arm/mach-pnx4008/core.c
@@ -0,0 +1,207 @@
+/*
+ * arch/arm/mach-pnx4008/core.c
+ *
+ * PNX4008 core startup code
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev,
+ * Grigory Tolstolytkin, Dmitry Pervushin <source@mvista.com>
+ *
+ * Based on reference code received from Philips:
+ * Copyright (C) 2003 Philips Semiconductors
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/serial_8250.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/system.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <asm/arch/irq.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dma.h>
+
+struct resource spipnx_0_resources[] = {
+	{
+		.start = PNX4008_SPI1_BASE,
+		.end = PNX4008_SPI1_BASE + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = PER_SPI1_REC_XMIT,
+		.flags = IORESOURCE_DMA,
+	}, {
+		.start = SPI1_INT,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.flags = 0,
+	},
+};
+
+struct resource spipnx_1_resources[] = {
+	{
+		.start = PNX4008_SPI2_BASE,
+		.end = PNX4008_SPI2_BASE + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = PER_SPI2_REC_XMIT,
+		.flags = IORESOURCE_DMA,
+	}, {
+		.start = SPI2_INT,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+	{
+		.modalias	= "m25p80",
+		.max_speed_hz	= 1000000,
+		.bus_num	= 1,
+		.chip_select	= 0,
+	},
+};
+
+static struct platform_device spipnx_1 = {
+	.name = "spipnx",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(spipnx_0_resources),
+	.resource = spipnx_0_resources,
+	.dev = {
+		.coherent_dma_mask = 0xFFFFFFFF,
+		},
+};
+
+static struct platform_device spipnx_2 = {
+	.name = "spipnx",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(spipnx_1_resources),
+	.resource = spipnx_1_resources,
+	.dev = {
+		.coherent_dma_mask = 0xFFFFFFFF,
+		},
+};
+
+static struct plat_serial8250_port platform_serial_ports[] = {
+	{
+		.membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART5_BASE)),
+		.mapbase = (unsigned long)PNX4008_UART5_BASE,
+		.irq = IIR5_INT,
+		.uartclk = PNX4008_UART_CLK,
+		.regshift = 2,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST,
+	},
+	{
+		.membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART3_BASE)),
+		.mapbase = (unsigned long)PNX4008_UART3_BASE,
+		.irq = IIR3_INT,
+		.uartclk = PNX4008_UART_CLK,
+		.regshift = 2,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST,
+	 },
+	{}
+};
+
+static struct platform_device serial_device = {
+	.name = "serial8250",
+	.id = PLAT8250_DEV_PLATFORM,
+	.dev = {
+		.platform_data = &platform_serial_ports,
+	},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&spipnx_1,
+	&spipnx_2,
+	&serial_device,
+};
+
+
+extern void pnx4008_uart_init(void);
+
+static void __init pnx4008_init(void)
+{
+	/*disable all START interrupt sources,
+	   and clear all START interrupt flags */
+	__raw_writel(0, START_INT_ER_REG(SE_PIN_BASE_INT));
+	__raw_writel(0, START_INT_ER_REG(SE_INT_BASE_INT));
+	__raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT));
+	__raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT));
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+	/* Switch on the UART clocks */
+	pnx4008_uart_init();
+}
+
+static struct map_desc pnx4008_io_desc[] __initdata = {
+	{
+		.virtual 	= IO_ADDRESS(PNX4008_IRAM_BASE),
+		.pfn 		= __phys_to_pfn(PNX4008_IRAM_BASE),
+		.length		= SZ_64K,
+		.type 		= MT_DEVICE,
+	}, {
+		.virtual 	= IO_ADDRESS(PNX4008_NDF_FLASH_BASE),
+		.pfn 		= __phys_to_pfn(PNX4008_NDF_FLASH_BASE),
+		.length		= SZ_1M - SZ_128K,
+		.type 		= MT_DEVICE,
+	}, {
+		.virtual 	= IO_ADDRESS(PNX4008_JPEG_CONFIG_BASE),
+		.pfn 		= __phys_to_pfn(PNX4008_JPEG_CONFIG_BASE),
+		.length		= SZ_128K * 3,
+		.type 		= MT_DEVICE,
+	}, {
+		.virtual 	= IO_ADDRESS(PNX4008_DMA_CONFIG_BASE),
+		.pfn 		= __phys_to_pfn(PNX4008_DMA_CONFIG_BASE),
+		.length		= SZ_1M,
+		.type 		= MT_DEVICE,
+	}, {
+		.virtual 	= IO_ADDRESS(PNX4008_AHB2FAB_BASE),
+		.pfn 		= __phys_to_pfn(PNX4008_AHB2FAB_BASE),
+		.length		= SZ_1M,
+		.type 		= MT_DEVICE,
+	},
+};
+
+void __init pnx4008_map_io(void)
+{
+	iotable_init(pnx4008_io_desc, ARRAY_SIZE(pnx4008_io_desc));
+}
+
+extern struct sys_timer pnx4008_timer;
+
+MACHINE_START(PNX4008, "Philips PNX4008")
+	/* Maintainer: MontaVista Software Inc. */
+	.phys_io 		= 0x40090000,
+	.io_pg_offst 		= (0xf4090000 >> 18) & 0xfffc,
+	.boot_params		= 0x80000100,
+	.map_io 		= pnx4008_map_io,
+	.init_irq 		= pnx4008_init_irq,
+	.init_machine 		= pnx4008_init,
+	.timer 			= &pnx4008_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
new file mode 100644
index 00000000000..981aa9dcded
--- /dev/null
+++ b/arch/arm/mach-pnx4008/dma.c
@@ -0,0 +1,1109 @@
+/*
+ *  linux/arch/arm/mach-pnx4008/dma.c
+ *
+ *  PNX4008 DMA registration and IRQ dispatching
+ *
+ *  Author:	Vitaly Wool
+ *  Copyright:	MontaVista Software Inc. (c) 2005
+ *
+ *  Based on the code from Nicolas Pitre
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/dma.h>
+#include <asm/dma-mapping.h>
+#include <asm/io.h>
+#include <asm/mach/dma.h>
+#include <asm/arch/clock.h>
+
+static struct dma_channel {
+	char *name;
+	void (*irq_handler) (int, int, void *, struct pt_regs *);
+	void *data;
+	struct pnx4008_dma_ll *ll;
+	u32 ll_dma;
+	void *target_addr;
+	int target_id;
+} dma_channels[MAX_DMA_CHANNELS];
+
+static struct ll_pool {
+	void *vaddr;
+	void *cur;
+	dma_addr_t dma_addr;
+	int count;
+} ll_pool;
+
+static spinlock_t ll_lock = SPIN_LOCK_UNLOCKED;
+
+struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t * ll_dma)
+{
+	struct pnx4008_dma_ll *ll = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ll_lock, flags);
+	if (ll_pool.count > 4) { /* can give one more */
+		ll = *(struct pnx4008_dma_ll **) ll_pool.cur;
+		*ll_dma = ll_pool.dma_addr + ((void *)ll - ll_pool.vaddr);
+		*(void **)ll_pool.cur = **(void ***)ll_pool.cur;
+		memset(ll, 0, sizeof(*ll));
+		ll_pool.count--;
+	}
+	spin_unlock_irqrestore(&ll_lock, flags);
+
+	return ll;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_alloc_ll_entry);
+
+void pnx4008_free_ll_entry(struct pnx4008_dma_ll * ll, dma_addr_t ll_dma)
+{
+	unsigned long flags;
+
+	if (ll) {
+		if ((unsigned long)((long)ll - (long)ll_pool.vaddr) > 0x4000) {
+			printk(KERN_ERR "Trying to free entry not allocated by DMA\n");
+			BUG();
+		}
+
+		if (ll->flags & DMA_BUFFER_ALLOCATED)
+			ll->free(ll->alloc_data);
+
+		spin_lock_irqsave(&ll_lock, flags);
+		*(long *)ll = *(long *)ll_pool.cur;
+		*(long *)ll_pool.cur = (long)ll;
+		ll_pool.count++;
+		spin_unlock_irqrestore(&ll_lock, flags);
+	}
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_free_ll_entry);
+
+void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll * ll)
+{
+	struct pnx4008_dma_ll *ptr;
+	u32 dma;
+
+	while (ll) {
+		dma = ll->next_dma;
+		ptr = ll->next;
+		pnx4008_free_ll_entry(ll, ll_dma);
+
+		ll_dma = dma;
+		ll = ptr;
+	}
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_free_ll);
+
+static int dma_channels_requested = 0;
+
+static inline void dma_increment_usage(void)
+{
+	if (!dma_channels_requested++) {
+		struct clk *clk = clk_get(0, "dma_ck");
+		if (!IS_ERR(clk)) {
+			clk_set_rate(clk, 1);
+			clk_put(clk);
+		}
+		pnx4008_config_dma(-1, -1, 1);
+	}
+}
+static inline void dma_decrement_usage(void)
+{
+	if (!--dma_channels_requested) {
+		struct clk *clk = clk_get(0, "dma_ck");
+		if (!IS_ERR(clk)) {
+			clk_set_rate(clk, 0);
+			clk_put(clk);
+		}
+		pnx4008_config_dma(-1, -1, 0);
+
+	}
+}
+
+static spinlock_t dma_lock = SPIN_LOCK_UNLOCKED;
+
+static inline void pnx4008_dma_lock(void)
+{
+	spin_lock_irq(&dma_lock);
+}
+
+static inline void pnx4008_dma_unlock(void)
+{
+	spin_unlock_irq(&dma_lock);
+}
+
+#define VALID_CHANNEL(c)	(((c) >= 0) && ((c) < MAX_DMA_CHANNELS))
+
+int pnx4008_request_channel(char *name, int ch,
+			    void (*irq_handler) (int, int, void *,
+						 struct pt_regs *), void *data)
+{
+	int i, found = 0;
+
+	/* basic sanity checks */
+	if (!name || (ch != -1 && !VALID_CHANNEL(ch)))
+		return -EINVAL;
+
+	pnx4008_dma_lock();
+
+	/* try grabbing a DMA channel with the requested priority */
+	for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) {
+		if (!dma_channels[i].name && (ch == -1 || ch == i)) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (found) {
+		dma_increment_usage();
+		dma_channels[i].name = name;
+		dma_channels[i].irq_handler = irq_handler;
+		dma_channels[i].data = data;
+		dma_channels[i].ll = NULL;
+		dma_channels[i].ll_dma = 0;
+	} else {
+		printk(KERN_WARNING "No more available DMA channels for %s\n",
+		       name);
+		i = -ENODEV;
+	}
+
+	pnx4008_dma_unlock();
+	return i;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_request_channel);
+
+void pnx4008_free_channel(int ch)
+{
+	if (!dma_channels[ch].name) {
+		printk(KERN_CRIT
+		       "%s: trying to free channel %d which is already freed\n",
+		       __FUNCTION__, ch);
+		return;
+	}
+
+	pnx4008_dma_lock();
+	pnx4008_free_ll(dma_channels[ch].ll_dma, dma_channels[ch].ll);
+	dma_channels[ch].ll = NULL;
+	dma_decrement_usage();
+
+	dma_channels[ch].name = NULL;
+	pnx4008_dma_unlock();
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_free_channel);
+
+int pnx4008_config_dma(int ahb_m1_be, int ahb_m2_be, int enable)
+{
+	unsigned long dma_cfg = __raw_readl(DMAC_CONFIG);
+
+	switch (ahb_m1_be) {
+	case 0:
+		dma_cfg &= ~(1 << 1);
+		break;
+	case 1:
+		dma_cfg |= (1 << 1);
+		break;
+	default:
+		break;
+	}
+
+	switch (ahb_m2_be) {
+	case 0:
+		dma_cfg &= ~(1 << 2);
+		break;
+	case 1:
+		dma_cfg |= (1 << 2);
+		break;
+	default:
+		break;
+	}
+
+	switch (enable) {
+	case 0:
+		dma_cfg &= ~(1 << 0);
+		break;
+	case 1:
+		dma_cfg |= (1 << 0);
+		break;
+	default:
+		break;
+	}
+
+	pnx4008_dma_lock();
+	__raw_writel(dma_cfg, DMAC_CONFIG);
+	pnx4008_dma_unlock();
+
+	return 0;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_config_dma);
+
+int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl * ch_ctrl,
+			     unsigned long *ctrl)
+{
+	int i = 0, dbsize, sbsize, err = 0;
+
+	if (!ctrl || !ch_ctrl) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	*ctrl = 0;
+
+	switch (ch_ctrl->tc_mask) {
+	case 0:
+		break;
+	case 1:
+		*ctrl |= (1 << 31);
+		break;
+
+	default:
+		err = -EINVAL;
+		goto out;
+	}
+
+	switch (ch_ctrl->cacheable) {
+	case 0:
+		break;
+	case 1:
+		*ctrl |= (1 << 30);
+		break;
+
+	default:
+		err = -EINVAL;
+		goto out;
+	}
+	switch (ch_ctrl->bufferable) {
+	case 0:
+		break;
+	case 1:
+		*ctrl |= (1 << 29);
+		break;
+
+	default:
+		err = -EINVAL;
+		goto out;
+	}
+	switch (ch_ctrl->priv_mode) {
+	case 0:
+		break;
+	case 1:
+		*ctrl |= (1 << 28);
+		break;
+
+	default:
+		err = -EINVAL;
+		goto out;
+	}
+	switch (ch_ctrl->di) {
+	case 0:
+		break;
+	case 1:
+		*ctrl |= (1 << 27);
+		break;
+
+	default:
+		err = -EINVAL;
+		goto out;
+	}
+	switch (ch_ctrl->si) {
+	case 0:
+		break;
+	case 1:
+		*ctrl |= (1 << 26);
+		break;
+
+	default:
+		err = -EINVAL;
+		goto out;
+	}
+	switch (ch_ctrl->dest_ahb1) {
+	case 0:
+		break;
+	case 1:
+		*ctrl |= (1 << 25);
+		break;
+
+	default:
+		err = -EINVAL;
+		goto out;
+	}
+	switch (ch_ctrl->src_ahb1) {
+	case 0:
+		break;
+	case 1:
+		*ctrl |= (1 << 24);
+		break;
+
+	default:
+		err = -EINVAL;
+		goto out;
+	}
+	switch (ch_ctrl->dwidth) {
+	case WIDTH_BYTE:
+		*ctrl &= ~(7 << 21);
+		break;
+	case WIDTH_HWORD:
+		*ctrl &= ~(7 << 21);
+		*ctrl |= (1 << 21);
+		break;
+	case WIDTH_WORD:
+		*ctrl &= ~(7 << 21);
+		*ctrl |= (2 << 21);
+		break;
+
+	default:
+		err = -EINVAL;
+		goto out;
+	}
+	switch (ch_ctrl->swidth) {
+	case WIDTH_BYTE:
+		*ctrl &= ~(7 << 18);
+		break;
+	case WIDTH_HWORD:
+		*ctrl &= ~(7 << 18);
+		*ctrl |= (1 << 18);
+		break;
+	case WIDTH_WORD:
+		*ctrl &= ~(7 << 18);
+		*ctrl |= (2 << 18);
+		break;
+
+	default:
+		err = -EINVAL;
+		goto out;
+	}
+	dbsize = ch_ctrl->dbsize;
+	while (!(dbsize & 1)) {
+		i++;
+		dbsize >>= 1;
+	}
+	if (ch_ctrl->dbsize != 1 || i > 8 || i == 1) {
+		err = -EINVAL;
+		goto out;
+	} else if (i > 1)
+		i--;
+	*ctrl &= ~(7 << 15);
+	*ctrl |= (i << 15);
+
+	sbsize = ch_ctrl->sbsize;
+	while (!(sbsize & 1)) {
+		i++;
+		sbsize >>= 1;
+	}
+	if (ch_ctrl->sbsize != 1 || i > 8 || i == 1) {
+		err = -EINVAL;
+		goto out;
+	} else if (i > 1)
+		i--;
+	*ctrl &= ~(7 << 12);
+	*ctrl |= (i << 12);
+
+	if (ch_ctrl->tr_size > 0x7ff) {
+		err = -E2BIG;
+		goto out;
+	}
+	*ctrl &= ~0x7ff;
+	*ctrl |= ch_ctrl->tr_size & 0x7ff;
+
+out:
+	return err;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_pack_control);
+
+int pnx4008_dma_parse_control(unsigned long ctrl,
+			      struct pnx4008_dma_ch_ctrl * ch_ctrl)
+{
+	int err = 0;
+
+	if (!ch_ctrl) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	ch_ctrl->tr_size = ctrl & 0x7ff;
+	ctrl >>= 12;
+
+	ch_ctrl->sbsize = 1 << (ctrl & 7);
+	if (ch_ctrl->sbsize > 1)
+		ch_ctrl->sbsize <<= 1;
+	ctrl >>= 3;
+
+	ch_ctrl->dbsize = 1 << (ctrl & 7);
+	if (ch_ctrl->dbsize > 1)
+		ch_ctrl->dbsize <<= 1;
+	ctrl >>= 3;
+
+	switch (ctrl & 7) {
+	case 0:
+		ch_ctrl->swidth = WIDTH_BYTE;
+		break;
+	case 1:
+		ch_ctrl->swidth = WIDTH_HWORD;
+		break;
+	case 2:
+		ch_ctrl->swidth = WIDTH_WORD;
+		break;
+	default:
+		err = -EINVAL;
+		goto out;
+	}
+	ctrl >>= 3;
+
+	switch (ctrl & 7) {
+	case 0:
+		ch_ctrl->dwidth = WIDTH_BYTE;
+		break;
+	case 1:
+		ch_ctrl->dwidth = WIDTH_HWORD;
+		break;
+	case 2:
+		ch_ctrl->dwidth = WIDTH_WORD;
+		break;
+	default:
+		err = -EINVAL;
+		goto out;
+	}
+	ctrl >>= 3;
+
+	ch_ctrl->src_ahb1 = ctrl & 1;
+	ctrl >>= 1;
+
+	ch_ctrl->dest_ahb1 = ctrl & 1;
+	ctrl >>= 1;
+
+	ch_ctrl->si = ctrl & 1;
+	ctrl >>= 1;
+
+	ch_ctrl->di = ctrl & 1;
+	ctrl >>= 1;
+
+	ch_ctrl->priv_mode = ctrl & 1;
+	ctrl >>= 1;
+
+	ch_ctrl->bufferable = ctrl & 1;
+	ctrl >>= 1;
+
+	ch_ctrl->cacheable = ctrl & 1;
+	ctrl >>= 1;
+
+	ch_ctrl->tc_mask = ctrl & 1;
+
+out:
+	return err;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_parse_control);
+
+int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config * ch_cfg,
+			    unsigned long *cfg)
+{
+	int err = 0;
+
+	if (!cfg || !ch_cfg) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	*cfg = 0;
+
+	switch (ch_cfg->halt) {
+	case 0:
+		break;
+	case 1:
+		*cfg |= (1 << 18);
+		break;
+
+	default:
+		err = -EINVAL;
+		goto out;
+	}
+	switch (ch_cfg->active) {
+	case 0:
+		break;
+	case 1:
+		*cfg |= (1 << 17);
+		break;
+
+	default:
+		err = -EINVAL;
+		goto out;
+	}
+	switch (ch_cfg->lock) {
+	case 0:
+		break;
+	case 1:
+		*cfg |= (1 << 16);
+		break;
+
+	default:
+		err = -EINVAL;
+		goto out;
+	}
+	switch (ch_cfg->itc) {
+	case 0:
+		break;
+	case 1:
+		*cfg |= (1 << 15);
+		break;
+
+	default:
+		err = -EINVAL;
+		goto out;
+	}
+	switch (ch_cfg->ie) {
+	case 0:
+		break;
+	case 1:
+		*cfg |= (1 << 14);
+		break;
+
+	default:
+		err = -EINVAL;
+		goto out;
+	}
+	switch (ch_cfg->flow_cntrl) {
+	case FC_MEM2MEM_DMA:
+		*cfg &= ~(7 << 11);
+		break;
+	case FC_MEM2PER_DMA:
+		*cfg &= ~(7 << 11);
+		*cfg |= (1 << 11);
+		break;
+	case FC_PER2MEM_DMA:
+		*cfg &= ~(7 << 11);
+		*cfg |= (2 << 11);
+		break;
+	case FC_PER2PER_DMA:
+		*cfg &= ~(7 << 11);
+		*cfg |= (3 << 11);
+		break;
+	case FC_PER2PER_DPER:
+		*cfg &= ~(7 << 11);
+		*cfg |= (4 << 11);
+		break;
+	case FC_MEM2PER_PER:
+		*cfg &= ~(7 << 11);
+		*cfg |= (5 << 11);
+		break;
+	case FC_PER2MEM_PER:
+		*cfg &= ~(7 << 11);
+		*cfg |= (6 << 11);
+		break;
+	case FC_PER2PER_SPER:
+		*cfg |= (7 << 11);
+		break;
+
+	default:
+		err = -EINVAL;
+		goto out;
+	}
+	*cfg &= ~(0x1f << 6);
+	*cfg |= ((ch_cfg->dest_per & 0x1f) << 6);
+
+	*cfg &= ~(0x1f << 1);
+	*cfg |= ((ch_cfg->src_per & 0x1f) << 1);
+
+out:
+	return err;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_pack_config);
+
+int pnx4008_dma_parse_config(unsigned long cfg,
+			     struct pnx4008_dma_ch_config * ch_cfg)
+{
+	int err = 0;
+
+	if (!ch_cfg) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	cfg >>= 1;
+
+	ch_cfg->src_per = cfg & 0x1f;
+	cfg >>= 5;
+
+	ch_cfg->dest_per = cfg & 0x1f;
+	cfg >>= 5;
+
+	switch (cfg & 7) {
+	case 0:
+		ch_cfg->flow_cntrl = FC_MEM2MEM_DMA;
+		break;
+	case 1:
+		ch_cfg->flow_cntrl = FC_MEM2PER_DMA;
+		break;
+	case 2:
+		ch_cfg->flow_cntrl = FC_PER2MEM_DMA;
+		break;
+	case 3:
+		ch_cfg->flow_cntrl = FC_PER2PER_DMA;
+		break;
+	case 4:
+		ch_cfg->flow_cntrl = FC_PER2PER_DPER;
+		break;
+	case 5:
+		ch_cfg->flow_cntrl = FC_MEM2PER_PER;
+		break;
+	case 6:
+		ch_cfg->flow_cntrl = FC_PER2MEM_PER;
+		break;
+	case 7:
+		ch_cfg->flow_cntrl = FC_PER2PER_SPER;
+	}
+	cfg >>= 3;
+
+	ch_cfg->ie = cfg & 1;
+	cfg >>= 1;
+
+	ch_cfg->itc = cfg & 1;
+	cfg >>= 1;
+
+	ch_cfg->lock = cfg & 1;
+	cfg >>= 1;
+
+	ch_cfg->active = cfg & 1;
+	cfg >>= 1;
+
+	ch_cfg->halt = cfg & 1;
+
+out:
+	return err;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_parse_config);
+
+void pnx4008_dma_split_head_entry(struct pnx4008_dma_config * config,
+				  struct pnx4008_dma_ch_ctrl * ctrl)
+{
+	int new_len = ctrl->tr_size, num_entries = 0;
+	int old_len = new_len;
+	int src_width, dest_width, count = 1;
+
+	switch (ctrl->swidth) {
+	case WIDTH_BYTE:
+		src_width = 1;
+		break;
+	case WIDTH_HWORD:
+		src_width = 2;
+		break;
+	case WIDTH_WORD:
+		src_width = 4;
+		break;
+	default:
+		return;
+	}
+
+	switch (ctrl->dwidth) {
+	case WIDTH_BYTE:
+		dest_width = 1;
+		break;
+	case WIDTH_HWORD:
+		dest_width = 2;
+		break;
+	case WIDTH_WORD:
+		dest_width = 4;
+		break;
+	default:
+		return;
+	}
+
+	while (new_len > 0x7FF) {
+		num_entries++;
+		new_len = (ctrl->tr_size + num_entries) / (num_entries + 1);
+	}
+	if (num_entries != 0) {
+		struct pnx4008_dma_ll *ll = NULL;
+		config->ch_ctrl &= ~0x7ff;
+		config->ch_ctrl |= new_len;
+		if (!config->is_ll) {
+			config->is_ll = 1;
+			while (num_entries) {
+				if (!ll) {
+					config->ll =
+					    pnx4008_alloc_ll_entry(&config->
+								   ll_dma);
+					ll = config->ll;
+				} else {
+					ll->next =
+					    pnx4008_alloc_ll_entry(&ll->
+								   next_dma);
+					ll = ll->next;
+				}
+
+				if (ctrl->si)
+					ll->src_addr =
+					    config->src_addr +
+					    src_width * new_len * count;
+				else
+					ll->src_addr = config->src_addr;
+				if (ctrl->di)
+					ll->dest_addr =
+					    config->dest_addr +
+					    dest_width * new_len * count;
+				else
+					ll->dest_addr = config->dest_addr;
+				ll->ch_ctrl = config->ch_ctrl & 0x7fffffff;
+				ll->next_dma = 0;
+				ll->next = NULL;
+				num_entries--;
+				count++;
+			}
+		} else {
+			struct pnx4008_dma_ll *ll_old = config->ll;
+			unsigned long ll_dma_old = config->ll_dma;
+			while (num_entries) {
+				if (!ll) {
+					config->ll =
+					    pnx4008_alloc_ll_entry(&config->
+								   ll_dma);
+					ll = config->ll;
+				} else {
+					ll->next =
+					    pnx4008_alloc_ll_entry(&ll->
+								   next_dma);
+					ll = ll->next;
+				}
+
+				if (ctrl->si)
+					ll->src_addr =
+					    config->src_addr +
+					    src_width * new_len * count;
+				else
+					ll->src_addr = config->src_addr;
+				if (ctrl->di)
+					ll->dest_addr =
+					    config->dest_addr +
+					    dest_width * new_len * count;
+				else
+					ll->dest_addr = config->dest_addr;
+				ll->ch_ctrl = config->ch_ctrl & 0x7fffffff;
+				ll->next_dma = 0;
+				ll->next = NULL;
+				num_entries--;
+				count++;
+			}
+			ll->next_dma = ll_dma_old;
+			ll->next = ll_old;
+		}
+		/* adjust last length/tc */
+		ll->ch_ctrl = config->ch_ctrl & (~0x7ff);
+		ll->ch_ctrl |= old_len - new_len * (count - 1);
+		config->ch_ctrl &= 0x7fffffff;
+	}
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_split_head_entry);
+
+void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll * cur_ll,
+				struct pnx4008_dma_ch_ctrl * ctrl)
+{
+	int new_len = ctrl->tr_size, num_entries = 0;
+	int old_len = new_len;
+	int src_width, dest_width, count = 1;
+
+	switch (ctrl->swidth) {
+	case WIDTH_BYTE:
+		src_width = 1;
+		break;
+	case WIDTH_HWORD:
+		src_width = 2;
+		break;
+	case WIDTH_WORD:
+		src_width = 4;
+		break;
+	default:
+		return;
+	}
+
+	switch (ctrl->dwidth) {
+	case WIDTH_BYTE:
+		dest_width = 1;
+		break;
+	case WIDTH_HWORD:
+		dest_width = 2;
+		break;
+	case WIDTH_WORD:
+		dest_width = 4;
+		break;
+	default:
+		return;
+	}
+
+	while (new_len > 0x7FF) {
+		num_entries++;
+		new_len = (ctrl->tr_size + num_entries) / (num_entries + 1);
+	}
+	if (num_entries != 0) {
+		struct pnx4008_dma_ll *ll = NULL;
+		cur_ll->ch_ctrl &= ~0x7ff;
+		cur_ll->ch_ctrl |= new_len;
+		if (!cur_ll->next) {
+			while (num_entries) {
+				if (!ll) {
+					cur_ll->next =
+					    pnx4008_alloc_ll_entry(&cur_ll->
+								   next_dma);
+					ll = cur_ll->next;
+				} else {
+					ll->next =
+					    pnx4008_alloc_ll_entry(&ll->
+								   next_dma);
+					ll = ll->next;
+				}
+
+				if (ctrl->si)
+					ll->src_addr =
+					    cur_ll->src_addr +
+					    src_width * new_len * count;
+				else
+					ll->src_addr = cur_ll->src_addr;
+				if (ctrl->di)
+					ll->dest_addr =
+					    cur_ll->dest_addr +
+					    dest_width * new_len * count;
+				else
+					ll->dest_addr = cur_ll->dest_addr;
+				ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff;
+				ll->next_dma = 0;
+				ll->next = NULL;
+				num_entries--;
+				count++;
+			}
+		} else {
+			struct pnx4008_dma_ll *ll_old = cur_ll->next;
+			unsigned long ll_dma_old = cur_ll->next_dma;
+			while (num_entries) {
+				if (!ll) {
+					cur_ll->next =
+					    pnx4008_alloc_ll_entry(&cur_ll->
+								   next_dma);
+					ll = cur_ll->next;
+				} else {
+					ll->next =
+					    pnx4008_alloc_ll_entry(&ll->
+								   next_dma);
+					ll = ll->next;
+				}
+
+				if (ctrl->si)
+					ll->src_addr =
+					    cur_ll->src_addr +
+					    src_width * new_len * count;
+				else
+					ll->src_addr = cur_ll->src_addr;
+				if (ctrl->di)
+					ll->dest_addr =
+					    cur_ll->dest_addr +
+					    dest_width * new_len * count;
+				else
+					ll->dest_addr = cur_ll->dest_addr;
+				ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff;
+				ll->next_dma = 0;
+				ll->next = NULL;
+				num_entries--;
+				count++;
+			}
+
+			ll->next_dma = ll_dma_old;
+			ll->next = ll_old;
+		}
+		/* adjust last length/tc */
+		ll->ch_ctrl = cur_ll->ch_ctrl & (~0x7ff);
+		ll->ch_ctrl |= old_len - new_len * (count - 1);
+		cur_ll->ch_ctrl &= 0x7fffffff;
+	}
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_split_ll_entry);
+
+int pnx4008_config_channel(int ch, struct pnx4008_dma_config * config)
+{
+	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
+		return -EINVAL;
+
+	pnx4008_dma_lock();
+	__raw_writel(config->src_addr, DMAC_Cx_SRC_ADDR(ch));
+	__raw_writel(config->dest_addr, DMAC_Cx_DEST_ADDR(ch));
+
+	if (config->is_ll)
+		__raw_writel(config->ll_dma, DMAC_Cx_LLI(ch));
+	else
+		__raw_writel(0, DMAC_Cx_LLI(ch));
+
+	__raw_writel(config->ch_ctrl, DMAC_Cx_CONTROL(ch));
+	__raw_writel(config->ch_cfg, DMAC_Cx_CONFIG(ch));
+	pnx4008_dma_unlock();
+
+	return 0;
+
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_config_channel);
+
+int pnx4008_channel_get_config(int ch, struct pnx4008_dma_config * config)
+{
+	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name || !config)
+		return -EINVAL;
+
+	pnx4008_dma_lock();
+	config->ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
+	config->ch_ctrl = __raw_readl(DMAC_Cx_CONTROL(ch));
+
+	config->ll_dma = __raw_readl(DMAC_Cx_LLI(ch));
+	config->is_ll = config->ll_dma ? 1 : 0;
+
+	config->src_addr = __raw_readl(DMAC_Cx_SRC_ADDR(ch));
+	config->dest_addr = __raw_readl(DMAC_Cx_DEST_ADDR(ch));
+	pnx4008_dma_unlock();
+
+	return 0;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_channel_get_config);
+
+int pnx4008_dma_ch_enable(int ch)
+{
+	unsigned long ch_cfg;
+
+	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
+		return -EINVAL;
+
+	pnx4008_dma_lock();
+	ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
+	ch_cfg |= 1;
+	__raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch));
+	pnx4008_dma_unlock();
+
+	return 0;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enable);
+
+int pnx4008_dma_ch_disable(int ch)
+{
+	unsigned long ch_cfg;
+
+	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
+		return -EINVAL;
+
+	pnx4008_dma_lock();
+	ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
+	ch_cfg &= ~1;
+	__raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch));
+	pnx4008_dma_unlock();
+
+	return 0;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_ch_disable);
+
+int pnx4008_dma_ch_enabled(int ch)
+{
+	unsigned long ch_cfg;
+
+	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
+		return -EINVAL;
+
+	pnx4008_dma_lock();
+	ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
+	pnx4008_dma_unlock();
+
+	return ch_cfg & 1;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enabled);
+
+static irqreturn_t dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+	int i;
+	unsigned long dint = __raw_readl(DMAC_INT_STAT);
+	unsigned long tcint = __raw_readl(DMAC_INT_TC_STAT);
+	unsigned long eint = __raw_readl(DMAC_INT_ERR_STAT);
+	unsigned long i_bit;
+
+	for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) {
+		i_bit = 1 << i;
+		if (dint & i_bit) {
+			struct dma_channel *channel = &dma_channels[i];
+
+			if (channel->name && channel->irq_handler) {
+				int cause = 0;
+
+				if (eint & i_bit)
+					cause |= DMA_ERR_INT;
+				if (tcint & i_bit)
+					cause |= DMA_TC_INT;
+				channel->irq_handler(i, cause, channel->data,
+						     regs);
+			} else {
+				/*
+				 * IRQ for an unregistered DMA channel
+				 */
+				printk(KERN_WARNING
+				       "spurious IRQ for DMA channel %d\n", i);
+			}
+			if (tcint & i_bit)
+				__raw_writel(i_bit, DMAC_INT_TC_CLEAR);
+			if (eint & i_bit)
+				__raw_writel(i_bit, DMAC_INT_ERR_CLEAR);
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+static int __init pnx4008_dma_init(void)
+{
+	int ret, i;
+
+	ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
+	if (ret) {
+		printk(KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
+		goto out;
+	}
+
+	ll_pool.count = 0x4000 / sizeof(struct pnx4008_dma_ll);
+	ll_pool.cur = ll_pool.vaddr =
+	    dma_alloc_coherent(NULL, ll_pool.count * sizeof(struct pnx4008_dma_ll),
+			       &ll_pool.dma_addr, GFP_KERNEL);
+
+	if (!ll_pool.vaddr) {
+		ret = -ENOMEM;
+		free_irq(DMA_INT, NULL);
+		goto out;
+	}
+
+	for (i = 0; i < ll_pool.count - 1; i++) {
+		void **addr = ll_pool.vaddr + i * sizeof(struct pnx4008_dma_ll);
+		*addr = (void *)addr + sizeof(struct pnx4008_dma_ll);
+	}
+	*(long *)(ll_pool.vaddr +
+		  (ll_pool.count - 1) * sizeof(struct pnx4008_dma_ll)) =
+	    (long)ll_pool.vaddr;
+
+	__raw_writel(1, DMAC_CONFIG);
+
+out:
+	return ret;
+}
+arch_initcall(pnx4008_dma_init);
diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c
new file mode 100644
index 00000000000..e1ce050d8fe
--- /dev/null
+++ b/arch/arm/mach-pnx4008/gpio.c
@@ -0,0 +1,330 @@
+/*
+ * arch/arm/mach-pnx4008/gpio.c
+ *
+ * PNX4008 GPIO driver
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
+ * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/semaphore.h>
+#include <asm/io.h>
+#include <asm/arch/platform.h>
+#include <asm/arch/gpio.h>
+
+/* register definitions */
+#define PIO_VA_BASE	IO_ADDRESS(PNX4008_PIO_BASE)
+
+#define PIO_INP_STATE	(0x00U)
+#define PIO_OUTP_SET	(0x04U)
+#define PIO_OUTP_CLR	(0x08U)
+#define PIO_OUTP_STATE	(0x0CU)
+#define PIO_DRV_SET	(0x10U)
+#define PIO_DRV_CLR	(0x14U)
+#define PIO_DRV_STATE	(0x18U)
+#define PIO_SDINP_STATE	(0x1CU)
+#define PIO_SDOUTP_SET	(0x20U)
+#define PIO_SDOUTP_CLR	(0x24U)
+#define PIO_MUX_SET	(0x28U)
+#define PIO_MUX_CLR	(0x2CU)
+#define PIO_MUX_STATE	(0x30U)
+
+static inline void gpio_lock(void)
+{
+	local_irq_disable();
+}
+
+static inline void gpio_unlock(void)
+{
+	local_irq_enable();
+}
+
+/* Inline functions */
+static inline int gpio_read_bit(u32 reg, int gpio)
+{
+	u32 bit, val;
+	int ret = -EFAULT;
+
+	if (gpio < 0)
+		goto out;
+
+	bit = GPIO_BIT(gpio);
+	if (bit) {
+		val = __raw_readl(PIO_VA_BASE + reg);
+		ret = (val & bit) ? 1 : 0;
+	}
+out:
+	return ret;
+}
+
+static inline int gpio_set_bit(u32 reg, int gpio)
+{
+	u32 bit, val;
+	int ret = -EFAULT;
+
+	if (gpio < 0)
+		goto out;
+
+	bit = GPIO_BIT(gpio);
+	if (bit) {
+		val = __raw_readl(PIO_VA_BASE + reg);
+		val |= bit;
+		__raw_writel(val, PIO_VA_BASE + reg);
+		ret = 0;
+	}
+out:
+	return ret;
+}
+
+/* Very simple access control, bitmap for allocated/free */
+static unsigned long access_map[4];
+#define INP_INDEX	0
+#define OUTP_INDEX	1
+#define GPIO_INDEX	2
+#define MUX_INDEX	3
+
+/*GPIO to Input Mapping */
+static short gpio_to_inp_map[32] = {
+	-1, -1, -1, -1, -1, -1, -1, -1,
+	-1, -1, -1, -1, -1, -1, -1, -1,
+	-1, -1, -1, -1, -1, -1, -1, -1,
+	-1, 10, 11, 12, 13, 14, 24, -1
+};
+
+/*GPIO to Mux Mapping */
+static short gpio_to_mux_map[32] = {
+	-1, -1, -1, -1, -1, -1, -1, -1,
+	-1, -1, -1, -1, -1, -1, -1, -1,
+	-1, -1, -1, -1, -1, -1, -1, -1,
+	-1, -1, -1, 0, 1, 4, 5, -1
+};
+
+/*Output to Mux Mapping */
+static short outp_to_mux_map[32] = {
+	-1, -1, -1, 6, -1, -1, -1, -1,
+	-1, -1, -1, -1, -1, -1, -1, -1,
+	-1, -1, -1, -1, -1, 2, -1, -1,
+	-1, -1, -1, -1, -1, -1, -1, -1
+};
+
+int pnx4008_gpio_register_pin(unsigned short pin)
+{
+	unsigned long bit = GPIO_BIT(pin);
+	int ret = -EBUSY;	/* Already in use */
+
+	gpio_lock();
+
+	if (GPIO_ISBID(pin)) {
+		if (access_map[GPIO_INDEX] & bit)
+			goto out;
+		access_map[GPIO_INDEX] |= bit;
+
+	} else if (GPIO_ISRAM(pin)) {
+		if (access_map[GPIO_INDEX] & bit)
+			goto out;
+		access_map[GPIO_INDEX] |= bit;
+
+	} else if (GPIO_ISMUX(pin)) {
+		if (access_map[MUX_INDEX] & bit)
+			goto out;
+		access_map[MUX_INDEX] |= bit;
+
+	} else if (GPIO_ISOUT(pin)) {
+		if (access_map[OUTP_INDEX] & bit)
+			goto out;
+		access_map[OUTP_INDEX] |= bit;
+
+	} else if (GPIO_ISIN(pin)) {
+		if (access_map[INP_INDEX] & bit)
+			goto out;
+		access_map[INP_INDEX] |= bit;
+	} else
+		goto out;
+	ret = 0;
+
+out:
+	gpio_unlock();
+	return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_register_pin);
+
+int pnx4008_gpio_unregister_pin(unsigned short pin)
+{
+	unsigned long bit = GPIO_BIT(pin);
+	int ret = -EFAULT;	/* Not registered */
+
+	gpio_lock();
+
+	if (GPIO_ISBID(pin)) {
+		if (~access_map[GPIO_INDEX] & bit)
+			goto out;
+		access_map[GPIO_INDEX] &= ~bit;
+	} else if (GPIO_ISRAM(pin)) {
+		if (~access_map[GPIO_INDEX] & bit)
+			goto out;
+		access_map[GPIO_INDEX] &= ~bit;
+	} else if (GPIO_ISMUX(pin)) {
+		if (~access_map[MUX_INDEX] & bit)
+			goto out;
+		access_map[MUX_INDEX] &= ~bit;
+	} else if (GPIO_ISOUT(pin)) {
+		if (~access_map[OUTP_INDEX] & bit)
+			goto out;
+		access_map[OUTP_INDEX] &= ~bit;
+	} else if (GPIO_ISIN(pin)) {
+		if (~access_map[INP_INDEX] & bit)
+			goto out;
+		access_map[INP_INDEX] &= ~bit;
+	} else
+		goto out;
+	ret = 0;
+
+out:
+	gpio_unlock();
+	return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_unregister_pin);
+
+unsigned long pnx4008_gpio_read_pin(unsigned short pin)
+{
+	unsigned long ret = -EFAULT;
+	int gpio = GPIO_BIT_MASK(pin);
+	gpio_lock();
+	if (GPIO_ISOUT(pin)) {
+		ret = gpio_read_bit(PIO_OUTP_STATE, gpio);
+	} else if (GPIO_ISRAM(pin)) {
+		if (gpio_read_bit(PIO_DRV_STATE, gpio) == 0) {
+			ret = gpio_read_bit(PIO_SDINP_STATE, gpio);
+		}
+	} else if (GPIO_ISBID(pin)) {
+		ret = gpio_read_bit(PIO_DRV_STATE, gpio);
+		if (ret > 0)
+			ret = gpio_read_bit(PIO_OUTP_STATE, gpio);
+		else if (ret == 0)
+			ret =
+			    gpio_read_bit(PIO_INP_STATE, gpio_to_inp_map[gpio]);
+	} else if (GPIO_ISIN(pin)) {
+		ret = gpio_read_bit(PIO_INP_STATE, gpio);
+	}
+	gpio_unlock();
+	return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_read_pin);
+
+/* Write Value to output */
+int pnx4008_gpio_write_pin(unsigned short pin, int output)
+{
+	int gpio = GPIO_BIT_MASK(pin);
+	int ret = -EFAULT;
+
+	gpio_lock();
+	if (GPIO_ISOUT(pin)) {
+		printk( "writing '%x' to '%x'\n",
+				gpio, output ? PIO_OUTP_SET : PIO_OUTP_CLR );
+		ret = gpio_set_bit(output ? PIO_OUTP_SET : PIO_OUTP_CLR, gpio);
+	} else if (GPIO_ISRAM(pin)) {
+		if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0)
+			ret = gpio_set_bit(output ? PIO_SDOUTP_SET :
+					   PIO_SDOUTP_CLR, gpio);
+	} else if (GPIO_ISBID(pin)) {
+		if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0)
+			ret = gpio_set_bit(output ? PIO_OUTP_SET :
+					   PIO_OUTP_CLR, gpio);
+	}
+	gpio_unlock();
+	return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_write_pin);
+
+/* Value = 1 : Set GPIO pin as output */
+/* Value = 0 : Set GPIO pin as input */
+int pnx4008_gpio_set_pin_direction(unsigned short pin, int output)
+{
+	int gpio = GPIO_BIT_MASK(pin);
+	int ret = -EFAULT;
+
+	gpio_lock();
+	if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) {
+		ret = gpio_set_bit(output ? PIO_DRV_SET : PIO_DRV_CLR, gpio);
+	}
+	gpio_unlock();
+	return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_set_pin_direction);
+
+/* Read GPIO pin direction: 0= pin used as input, 1= pin used as output*/
+int pnx4008_gpio_read_pin_direction(unsigned short pin)
+{
+	int gpio = GPIO_BIT_MASK(pin);
+	int ret = -EFAULT;
+
+	gpio_lock();
+	if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) {
+		ret = gpio_read_bit(PIO_DRV_STATE, gpio);
+	}
+	gpio_unlock();
+	return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_read_pin_direction);
+
+/* Value = 1 : Set pin to muxed function  */
+/* Value = 0 : Set pin as GPIO */
+int pnx4008_gpio_set_pin_mux(unsigned short pin, int output)
+{
+	int gpio = GPIO_BIT_MASK(pin);
+	int ret = -EFAULT;
+
+	gpio_lock();
+	if (GPIO_ISBID(pin)) {
+		ret =
+		    gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR,
+				 gpio_to_mux_map[gpio]);
+	} else if (GPIO_ISOUT(pin)) {
+		ret =
+		    gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR,
+				 outp_to_mux_map[gpio]);
+	} else if (GPIO_ISMUX(pin)) {
+		ret = gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR, gpio);
+	}
+	gpio_unlock();
+	return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_set_pin_mux);
+
+/* Read pin mux function: 0= pin used as GPIO, 1= pin used for muxed function*/
+int pnx4008_gpio_read_pin_mux(unsigned short pin)
+{
+	int gpio = GPIO_BIT_MASK(pin);
+	int ret = -EFAULT;
+
+	gpio_lock();
+	if (GPIO_ISBID(pin)) {
+		ret = gpio_read_bit(PIO_MUX_STATE, gpio_to_mux_map[gpio]);
+	} else if (GPIO_ISOUT(pin)) {
+		ret = gpio_read_bit(PIO_MUX_STATE, outp_to_mux_map[gpio]);
+	} else if (GPIO_ISMUX(pin)) {
+		ret = gpio_read_bit(PIO_MUX_STATE, gpio);
+	}
+	gpio_unlock();
+	return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_read_pin_mux);
diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c
new file mode 100644
index 00000000000..9b0a8e084e9
--- /dev/null
+++ b/arch/arm/mach-pnx4008/irq.c
@@ -0,0 +1,121 @@
+/*
+ * arch/arm/mach-pnx4008/irq.c
+ *
+ * PNX4008 IRQ controller driver
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * Based on reference code received from Philips:
+ * Copyright (C) 2003 Philips Semiconductors
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/system.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/arch/irq.h>
+
+static u8 pnx4008_irq_type[NR_IRQS] = PNX4008_IRQ_TYPES;
+
+static void pnx4008_mask_irq(unsigned int irq)
+{
+	__raw_writel(__raw_readl(INTC_ER(irq)) & ~INTC_BIT(irq), INTC_ER(irq));	/* mask interrupt */
+}
+
+static void pnx4008_unmask_irq(unsigned int irq)
+{
+	__raw_writel(__raw_readl(INTC_ER(irq)) | INTC_BIT(irq), INTC_ER(irq));	/* unmask interrupt */
+}
+
+static void pnx4008_mask_ack_irq(unsigned int irq)
+{
+	__raw_writel(__raw_readl(INTC_ER(irq)) & ~INTC_BIT(irq), INTC_ER(irq));	/* mask interrupt */
+	__raw_writel(INTC_BIT(irq), INTC_SR(irq));	/* clear interrupt status */
+}
+
+static int pnx4008_set_irq_type(unsigned int irq, unsigned int type)
+{
+	switch (type) {
+	case IRQT_RISING:
+		__raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq));	/*edge sensitive */
+		__raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq));	/*rising edge */
+		set_irq_handler(irq, do_edge_IRQ);
+		break;
+	case IRQT_FALLING:
+		__raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq));	/*edge sensitive */
+		__raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq));	/*falling edge */
+		set_irq_handler(irq, do_edge_IRQ);
+		break;
+	case IRQT_LOW:
+		__raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq));	/*level sensitive */
+		__raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq));	/*low level */
+		set_irq_handler(irq, do_level_IRQ);
+		break;
+	case IRQT_HIGH:
+		__raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq));	/*level sensitive */
+		__raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq));	/* high level */
+		set_irq_handler(irq, do_level_IRQ);
+		break;
+
+	/* IRQT_BOTHEDGE is not supported */
+	default:
+		printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type);
+		return -1;
+	}
+	return 0;
+}
+
+static struct irqchip pnx4008_irq_chip = {
+	.ack = pnx4008_mask_ack_irq,
+	.mask = pnx4008_mask_irq,
+	.unmask = pnx4008_unmask_irq,
+	.set_type = pnx4008_set_irq_type,
+};
+
+void __init pnx4008_init_irq(void)
+{
+	unsigned int i;
+
+	/* configure and enable IRQ 0,1,30,31 (cascade interrupts) mask all others */
+	pnx4008_set_irq_type(SUB1_IRQ_N, pnx4008_irq_type[SUB1_IRQ_N]);
+	pnx4008_set_irq_type(SUB2_IRQ_N, pnx4008_irq_type[SUB2_IRQ_N]);
+	pnx4008_set_irq_type(SUB1_FIQ_N, pnx4008_irq_type[SUB1_FIQ_N]);
+	pnx4008_set_irq_type(SUB2_FIQ_N, pnx4008_irq_type[SUB2_FIQ_N]);
+
+	__raw_writel((1 << SUB2_FIQ_N) | (1 << SUB1_FIQ_N) |
+			(1 << SUB2_IRQ_N) | (1 << SUB1_IRQ_N),
+		INTC_ER(MAIN_BASE_INT));
+	__raw_writel(0, INTC_ER(SIC1_BASE_INT));
+	__raw_writel(0, INTC_ER(SIC2_BASE_INT));
+
+	/* configure all other IRQ's */
+	for (i = 0; i < NR_IRQS; i++) {
+		if (i == SUB2_FIQ_N || i == SUB1_FIQ_N ||
+			i == SUB2_IRQ_N || i == SUB1_IRQ_N)
+			continue;
+		set_irq_flags(i, IRQF_VALID);
+		set_irq_chip(i, &pnx4008_irq_chip);
+		pnx4008_set_irq_type(i, pnx4008_irq_type[i]);
+	}
+}
+
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
new file mode 100644
index 00000000000..3649cd3dfc9
--- /dev/null
+++ b/arch/arm/mach-pnx4008/pm.c
@@ -0,0 +1,184 @@
+/*
+ * arch/arm/mach-pnx4008/pm.c
+ *
+ * Power Management driver for PNX4008
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/pm.h>
+#include <linux/rtc.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/cacheflush.h>
+#include <asm/arch/pm.h>
+#include <asm/arch/clock.h>
+
+#define SRAM_VA IO_ADDRESS(PNX4008_IRAM_BASE)
+
+static void *saved_sram;
+
+static struct clk *pll4_clk;
+
+static inline void pnx4008_standby(void)
+{
+	void (*pnx4008_cpu_standby_ptr) (void);
+
+	local_irq_disable();
+	local_fiq_disable();
+
+	clk_disable(pll4_clk);
+
+	/*saving portion of SRAM to be used by suspend function. */
+	memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_standby_sz);
+
+	/*make sure SRAM copy gets physically written into SDRAM.
+	   SDRAM will be placed into self-refresh during power down */
+	flush_cache_all();
+
+	/*copy suspend function into SRAM */
+	memcpy((void *)SRAM_VA, pnx4008_cpu_standby, pnx4008_cpu_standby_sz);
+
+	/*do suspend */
+	pnx4008_cpu_standby_ptr = (void *)SRAM_VA;
+	pnx4008_cpu_standby_ptr();
+
+	/*restoring portion of SRAM that was used by suspend function */
+	memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_standby_sz);
+
+	clk_enable(pll4_clk);
+
+	local_fiq_enable();
+	local_irq_enable();
+}
+
+static inline void pnx4008_suspend(void)
+{
+	void (*pnx4008_cpu_suspend_ptr) (void);
+
+	local_irq_disable();
+	local_fiq_disable();
+
+	clk_disable(pll4_clk);
+
+	__raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT));
+	__raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT));
+
+	/*saving portion of SRAM to be used by suspend function. */
+	memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_suspend_sz);
+
+	/*make sure SRAM copy gets physically written into SDRAM.
+	   SDRAM will be placed into self-refresh during power down */
+	flush_cache_all();
+
+	/*copy suspend function into SRAM */
+	memcpy((void *)SRAM_VA, pnx4008_cpu_suspend, pnx4008_cpu_suspend_sz);
+
+	/*do suspend */
+	pnx4008_cpu_suspend_ptr = (void *)SRAM_VA;
+	pnx4008_cpu_suspend_ptr();
+
+	/*restoring portion of SRAM that was used by suspend function */
+	memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_suspend_sz);
+
+	clk_enable(pll4_clk);
+
+	local_fiq_enable();
+	local_irq_enable();
+}
+
+static int pnx4008_pm_enter(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		pnx4008_standby();
+		break;
+	case PM_SUSPEND_MEM:
+		pnx4008_suspend();
+		break;
+	case PM_SUSPEND_DISK:
+		return -ENOTSUPP;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/*
+ * Called after processes are frozen, but before we shut down devices.
+ */
+static int pnx4008_pm_prepare(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		break;
+
+	case PM_SUSPEND_DISK:
+		return -ENOTSUPP;
+		break;
+
+	default:
+		return -EINVAL;
+		break;
+	}
+	return 0;
+}
+
+/*
+ * Called after devices are re-setup, but before processes are thawed.
+ */
+static int pnx4008_pm_finish(suspend_state_t state)
+{
+	return 0;
+}
+
+/*
+ * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
+ */
+static struct pm_ops pnx4008_pm_ops = {
+	.prepare = pnx4008_pm_prepare,
+	.enter = pnx4008_pm_enter,
+	.finish = pnx4008_pm_finish,
+};
+
+static int __init pnx4008_pm_init(void)
+{
+	u32 sram_size_to_allocate;
+
+	pll4_clk = clk_get(0, "ck_pll4");
+	if (IS_ERR(pll4_clk)) {
+		printk(KERN_ERR
+		       "PM Suspend cannot acquire ARM(PLL4) clock control\n");
+		return PTR_ERR(pll4_clk);
+	}
+
+	if (pnx4008_cpu_standby_sz > pnx4008_cpu_suspend_sz)
+		sram_size_to_allocate = pnx4008_cpu_standby_sz;
+	else
+		sram_size_to_allocate = pnx4008_cpu_suspend_sz;
+
+	saved_sram = kmalloc(sram_size_to_allocate, GFP_ATOMIC);
+	if (!saved_sram) {
+		printk(KERN_ERR
+		       "PM Suspend: cannot allocate memory to save portion of SRAM\n");
+		clk_put(pll4_clk);
+		return -ENOMEM;
+	}
+
+	pm_set_ops(&pnx4008_pm_ops);
+	return 0;
+}
+
+late_initcall(pnx4008_pm_init);
diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c
new file mode 100644
index 00000000000..2e1e04cc048
--- /dev/null
+++ b/arch/arm/mach-pnx4008/serial.c
@@ -0,0 +1,69 @@
+/*
+ *  linux/arch/arm/mach-pnx4008/serial.c
+ *
+ *  PNX4008 UART initialization
+ *
+ *  Copyright:	MontaVista Software Inc. (c) 2005
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/platform.h>
+#include <asm/arch/hardware.h>
+
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <asm/arch/pm.h>
+
+#include <asm/arch/clock.h>
+
+#define UART_3		0
+#define UART_4		1
+#define UART_5		2
+#define UART_6		3
+#define UART_UNKNOWN	(-1)
+
+#define UART3_BASE_VA	IO_ADDRESS(PNX4008_UART3_BASE)
+#define UART4_BASE_VA	IO_ADDRESS(PNX4008_UART4_BASE)
+#define UART5_BASE_VA	IO_ADDRESS(PNX4008_UART5_BASE)
+#define UART6_BASE_VA	IO_ADDRESS(PNX4008_UART6_BASE)
+
+#define UART_FCR_OFFSET		8
+#define UART_FIFO_SIZE		64
+
+void pnx4008_uart_init(void)
+{
+	u32 tmp;
+	int i = UART_FIFO_SIZE;
+
+	__raw_writel(0xC1, UART5_BASE_VA + UART_FCR_OFFSET);
+	__raw_writel(0xC1, UART3_BASE_VA + UART_FCR_OFFSET);
+
+	/* Send a NULL to fix the UART HW bug */
+	__raw_writel(0x00, UART5_BASE_VA);
+	__raw_writel(0x00, UART3_BASE_VA);
+
+	while (i--) {
+		tmp = __raw_readl(UART5_BASE_VA);
+		tmp = __raw_readl(UART3_BASE_VA);
+	}
+	__raw_writel(0, UART5_BASE_VA + UART_FCR_OFFSET);
+	__raw_writel(0, UART3_BASE_VA + UART_FCR_OFFSET);
+
+	/* setup wakeup interrupt */
+	start_int_set_rising_edge(SE_U3_RX_INT);
+	start_int_ack(SE_U3_RX_INT);
+	start_int_umask(SE_U3_RX_INT);
+
+	start_int_set_rising_edge(SE_U5_RX_INT);
+	start_int_ack(SE_U5_RX_INT);
+	start_int_umask(SE_U5_RX_INT);
+}
+
diff --git a/arch/arm/mach-pnx4008/sleep.S b/arch/arm/mach-pnx4008/sleep.S
new file mode 100644
index 00000000000..93c802bac26
--- /dev/null
+++ b/arch/arm/mach-pnx4008/sleep.S
@@ -0,0 +1,196 @@
+/*
+ * linux/arch/arm/mach-pnx4008/sleep.S
+ *
+ * PNX4008 support for STOP mode and SDRAM self-refresh
+ *
+ * Authors: Dmitry Chigirev, Vitaly Wool <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/hardware.h>
+
+#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE)
+#define PWR_CTRL_REG_OFFS 0x44
+
+#define SDRAM_CFG_VA_BASE IO_ADDRESS(PNX4008_SDRAM_CFG_BASE)
+#define MPMC_STATUS_REG_OFFS 0x4
+
+		.text
+
+ENTRY(pnx4008_cpu_suspend)
+	@this function should be entered in Direct run mode.
+
+	@ save registers on stack
+	stmfd	sp!, {r0 - r6, lr}
+
+	@ setup Power Manager base address in r4
+	@ and put it's value in r5
+	mov	r4, #(PWRMAN_VA_BASE & 0xff000000)
+	orr	r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000)
+	orr	r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00)
+	orr	r4, r4, #(PWRMAN_VA_BASE & 0x000000ff)
+	ldr	r5, [r4, #PWR_CTRL_REG_OFFS]
+
+	@ setup SDRAM controller base address in r2
+	@ and put it's value in r3
+	mov	r2, #(SDRAM_CFG_VA_BASE & 0xff000000)
+	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000)
+	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00)
+	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff)
+	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround
+
+	@ clear SDRAM self-refresh bit latch
+	and	r5, r5, #(~(1 << 8))
+	@ clear SDRAM self-refresh bit
+	and	r5, r5, #(~(1 << 9))
+	str	r5, [r4, #PWR_CTRL_REG_OFFS]
+
+	@ do save current bit settings in r1
+	mov	r1, r5
+
+	@ set SDRAM self-refresh bit
+	orr	r5, r5, #(1 << 9)
+	str	r5, [r4, #PWR_CTRL_REG_OFFS]
+
+	@ set SDRAM self-refresh bit latch
+	orr	r5, r5, #(1 << 8)
+	str	r5, [r4, #PWR_CTRL_REG_OFFS]
+
+	@ clear SDRAM self-refresh bit latch
+	and	r5, r5, #(~(1 << 8))
+	str	r5, [r4, #PWR_CTRL_REG_OFFS]
+
+	@ clear SDRAM self-refresh bit
+	and	r5, r5, #(~(1 << 9))
+	str	r5, [r4, #PWR_CTRL_REG_OFFS]
+
+	@ wait for SDRAM to get into self-refresh mode
+2:	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS]
+	tst	r3, #(1 << 2)
+	beq	2b
+
+	@ to prepare SDRAM to get out of self-refresh mode after wakeup
+	orr	r5, r5, #(1 << 7)
+	str	r5, [r4, #PWR_CTRL_REG_OFFS]
+
+	@ do enter stop mode
+	orr	r5, r5, #(1 << 0)
+	str	r5, [r4, #PWR_CTRL_REG_OFFS]
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	@ sleeping now...
+
+	@ coming out of STOP mode into Direct Run mode
+	@ clear STOP mode and SDRAM self-refresh bits
+	str	r1, [r4, #PWR_CTRL_REG_OFFS]
+
+	@ wait for SDRAM to get out self-refresh mode
+3:	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS]
+	tst	r3, #5
+	bne	3b
+
+	@ restore regs and return
+	ldmfd   sp!, {r0 - r6, pc}
+
+ENTRY(pnx4008_cpu_suspend_sz)
+	.word	. - pnx4008_cpu_suspend
+
+ENTRY(pnx4008_cpu_standby)
+	@ save registers on stack
+	stmfd	sp!, {r0 - r6, lr}
+
+	@ setup Power Manager base address in r4
+	@ and put it's value in r5
+	mov	r4, #(PWRMAN_VA_BASE & 0xff000000)
+	orr	r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000)
+	orr	r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00)
+	orr	r4, r4, #(PWRMAN_VA_BASE & 0x000000ff)
+	ldr	r5, [r4, #PWR_CTRL_REG_OFFS]
+
+	@ setup SDRAM controller base address in r2
+	@ and put it's value in r3
+	mov	r2, #(SDRAM_CFG_VA_BASE & 0xff000000)
+	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000)
+	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00)
+	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff)
+	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround
+
+	@ clear SDRAM self-refresh bit latch
+	and	r5, r5, #(~(1 << 8))
+	@ clear SDRAM self-refresh bit
+	and	r5, r5, #(~(1 << 9))
+	str	r5, [r4, #PWR_CTRL_REG_OFFS]
+
+	@ do save current bit settings in r1
+	mov	r1, r5
+
+	@ set SDRAM self-refresh bit
+	orr	r5, r5, #(1 << 9)
+	str	r5, [r4, #PWR_CTRL_REG_OFFS]
+
+	@ set SDRAM self-refresh bit latch
+	orr	r5, r5, #(1 << 8)
+	str	r5, [r4, #PWR_CTRL_REG_OFFS]
+
+	@ clear SDRAM self-refresh bit latch
+	and	r5, r5, #(~(1 << 8))
+	str	r5, [r4, #PWR_CTRL_REG_OFFS]
+
+	@ clear SDRAM self-refresh bit
+	and	r5, r5, #(~(1 << 9))
+	str	r5, [r4, #PWR_CTRL_REG_OFFS]
+
+	@ wait for SDRAM to get into self-refresh mode
+2:	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS]
+	tst	r3, #(1 << 2)
+	beq	2b
+
+	@ set 'get out of self-refresh mode after wakeup' bit
+	orr	r5, r5, #(1 << 7)
+	str	r5, [r4, #PWR_CTRL_REG_OFFS]
+
+	mcr     p15, 0, r0, c7, c0, 4	@ kinda sleeping now...
+
+	@ set SDRAM self-refresh bit latch
+	orr	r5, r5, #(1 << 8)
+	str	r5, [r4, #PWR_CTRL_REG_OFFS]
+
+	@ clear SDRAM self-refresh bit latch
+	and	r5, r5, #(~(1 << 8))
+	str	r5, [r4, #PWR_CTRL_REG_OFFS]
+
+	@ wait for SDRAM to get out self-refresh mode
+3:	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS]
+	tst	r3, #5
+	bne	3b
+
+	@ restore regs and return
+	ldmfd   sp!, {r0 - r6, pc}
+
+ENTRY(pnx4008_cpu_standby_sz)
+	.word	. - pnx4008_cpu_standby
+
+ENTRY(pnx4008_cache_clean_invalidate)
+	stmfd	sp!, {r0 - r6, lr}
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
+#else
+1:	mrc	p15, 0, r15, c7, c14, 3		@ test,clean,invalidate
+	bne     1b
+#endif
+	ldmfd   sp!, {r0 - r6, pc}
diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c
new file mode 100644
index 00000000000..4ce68069852
--- /dev/null
+++ b/arch/arm/mach-pnx4008/time.c
@@ -0,0 +1,141 @@
+/*
+ * arch/arm/mach-pnx4008/time.c
+ *
+ * PNX4008 Timers
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev, Grigory Tolstolytkin <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+
+#include <asm/system.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/leds.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <asm/errno.h>
+
+/*! Note: all timers are UPCOUNTING */
+
+/*!
+ * Returns number of us since last clock interrupt.  Note that interrupts
+ * will have been disabled by do_gettimeoffset()
+ */
+static unsigned long pnx4008_gettimeoffset(void)
+{
+	u32 ticks_to_match =
+	    __raw_readl(HSTIM_MATCH0) - __raw_readl(HSTIM_COUNTER);
+	u32 elapsed = LATCH - ticks_to_match;
+	return (elapsed * (tick_nsec / 1000)) / LATCH;
+}
+
+/*!
+ * IRQ handler for the timer
+ */
+static irqreturn_t pnx4008_timer_interrupt(int irq, void *dev_id,
+					   struct pt_regs *regs)
+{
+	if (__raw_readl(HSTIM_INT) & MATCH0_INT) {
+
+		write_seqlock(&xtime_lock);
+
+		do {
+			timer_tick(regs);
+
+			/*
+			 * this algorithm takes care of possible delay
+			 * for this interrupt handling longer than a normal
+			 * timer period
+			 */
+			__raw_writel(__raw_readl(HSTIM_MATCH0) + LATCH,
+				     HSTIM_MATCH0);
+			__raw_writel(MATCH0_INT, HSTIM_INT);	/* clear interrupt */
+
+			/*
+			 * The goal is to keep incrementing HSTIM_MATCH0
+			 * register until HSTIM_MATCH0 indicates time after
+			 * what HSTIM_COUNTER indicates.
+			 */
+		} while ((signed)
+			 (__raw_readl(HSTIM_MATCH0) -
+			  __raw_readl(HSTIM_COUNTER)) < 0);
+
+		write_sequnlock(&xtime_lock);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction pnx4008_timer_irq = {
+	.name = "PNX4008 Tick Timer",
+	.flags = SA_INTERRUPT | SA_TIMER,
+	.handler = pnx4008_timer_interrupt
+};
+
+/*!
+ * Set up timer and timer interrupt.
+ */
+static __init void pnx4008_setup_timer(void)
+{
+	__raw_writel(RESET_COUNT, MSTIM_CTRL);
+	while (__raw_readl(MSTIM_COUNTER)) ;	/* wait for reset to complete. 100% guarantee event */
+	__raw_writel(0, MSTIM_CTRL);	/* stop the timer */
+	__raw_writel(0, MSTIM_MCTRL);
+
+	__raw_writel(RESET_COUNT, HSTIM_CTRL);
+	while (__raw_readl(HSTIM_COUNTER)) ;	/* wait for reset to complete. 100% guarantee event */
+	__raw_writel(0, HSTIM_CTRL);
+	__raw_writel(0, HSTIM_MCTRL);
+	__raw_writel(0, HSTIM_CCR);
+	__raw_writel(12, HSTIM_PMATCH);	/* scale down to 1 MHZ */
+	__raw_writel(LATCH, HSTIM_MATCH0);
+	__raw_writel(MR0_INT, HSTIM_MCTRL);
+
+	setup_irq(HSTIMER_INT, &pnx4008_timer_irq);
+
+	__raw_writel(COUNT_ENAB | DEBUG_EN, HSTIM_CTRL);	/*start timer, stop when JTAG active */
+}
+
+/* Timer Clock Control in PM register */
+#define TIMCLK_CTRL_REG  IO_ADDRESS((PNX4008_PWRMAN_BASE + 0xBC))
+#define WATCHDOG_CLK_EN                   1
+#define TIMER_CLK_EN                      2	/* HS and MS timers? */
+
+static u32 timclk_ctrl_reg_save;
+
+void pnx4008_timer_suspend(void)
+{
+	timclk_ctrl_reg_save = __raw_readl(TIMCLK_CTRL_REG);
+	__raw_writel(0, TIMCLK_CTRL_REG);	/* disable timers */
+}
+
+void pnx4008_timer_resume(void)
+{
+	__raw_writel(timclk_ctrl_reg_save, TIMCLK_CTRL_REG);	/* enable timers */
+}
+
+struct sys_timer pnx4008_timer = {
+	.init = pnx4008_setup_timer,
+	.offset = pnx4008_gettimeoffset,
+	.suspend = pnx4008_timer_suspend,
+	.resume = pnx4008_timer_resume,
+};
+
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c55b739e10b..1ff2f073a55 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -121,8 +121,8 @@ config CPU_ARM925T
 # ARM926T
 config CPU_ARM926T
 	bool "Support ARM926T processor"
-	depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB
-	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX
+	depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008
+	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008
 	select CPU_32v5
 	select CPU_ABRT_EV5TJ
 	select CPU_CACHE_VIVT