diff options
Diffstat (limited to 'arch')
308 files changed, 2117 insertions, 11566 deletions
diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h index b1834166922..4ac48a095f3 100644 --- a/arch/alpha/include/asm/unistd.h +++ b/arch/alpha/include/asm/unistd.h @@ -456,10 +456,11 @@ #define __NR_open_by_handle_at 498 #define __NR_clock_adjtime 499 #define __NR_syncfs 500 +#define __NR_setns 501 #ifdef __KERNEL__ -#define NR_SYSCALLS 501 +#define NR_SYSCALLS 502 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index 15f999d41c7..b9c28f3f195 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -519,6 +519,7 @@ sys_call_table: .quad sys_open_by_handle_at .quad sys_clock_adjtime .quad sys_syncfs /* 500 */ + .quad sys_setns .size sys_call_table, . - sys_call_table .type sys_call_table, @object diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7275009686e..9adc278a22a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -294,6 +294,8 @@ config ARCH_AT91 bool "Atmel AT91" select ARCH_REQUIRE_GPIOLIB select HAVE_CLK + select CLKDEV_LOOKUP + select ARM_PATCH_PHYS_VIRT if MMU help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 and AT91CAP9 processors. @@ -730,16 +732,6 @@ config ARCH_S5P64X0 Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, SMDK6450. -config ARCH_S5P6442 - bool "Samsung S5P6442" - select CPU_V6 - select GENERIC_GPIO - select HAVE_CLK - select ARCH_USES_GETTIMEOFFSET - select HAVE_S3C2410_WATCHDOG if WATCHDOG - help - Samsung S5P6442 CPU based systems - config ARCH_S5PC100 bool "Samsung S5PC100" select GENERIC_GPIO @@ -991,8 +983,6 @@ endif source "arch/arm/mach-s5p64x0/Kconfig" -source "arch/arm/mach-s5p6442/Kconfig" - source "arch/arm/mach-s5pc100/Kconfig" source "arch/arm/mach-s5pv210/Kconfig" @@ -1399,7 +1389,6 @@ config NR_CPUS config HOTPLUG_CPU bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" depends on SMP && HOTPLUG && EXPERIMENTAL - depends on !ARCH_MSM help Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. @@ -1420,7 +1409,7 @@ source kernel/Kconfig.preempt config HZ int default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \ - ARCH_S5P6442 || ARCH_S5PV210 || ARCH_EXYNOS4 + ARCH_S5PV210 || ARCH_EXYNOS4 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default AT91_TIMER_HZ if ARCH_AT91 default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE @@ -1516,6 +1505,9 @@ config ARCH_SPARSEMEM_DEFAULT config ARCH_SELECT_MEMORY_MODEL def_bool ARCH_SPARSEMEM_ENABLE +config HAVE_ARCH_PFN_VALID + def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM + config HIGHMEM bool "High Memory Support" depends on MMU @@ -1683,6 +1675,13 @@ endmenu menu "Boot options" +config USE_OF + bool "Flattened Device Tree support" + select OF + select OF_EARLY_FLATTREE + help + Include support for flattened device tree machine descriptions. + # Compressed boot loader in ROM. Yes, we really want to ask about # TEXT and BSS so we preserve their values in the config files. config ZBOOT_ROM_TEXT @@ -2021,7 +2020,7 @@ menu "Power management options" source "kernel/power/Kconfig" config ARCH_SUSPEND_POSSIBLE - depends on !ARCH_S5P64X0 && !ARCH_S5P6442 && !ARCH_S5PC100 + depends on !ARCH_S5P64X0 && !ARCH_S5PC100 depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \ CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE def_bool y diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 25750bcb339..f5b2b390c8f 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -176,7 +176,6 @@ machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c24 machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0 -machine-$(CONFIG_ARCH_S5P6442) := s5p6442 machine-$(CONFIG_ARCH_S5PC100) := s5pc100 machine-$(CONFIG_ARCH_S5PV210) := s5pv210 machine-$(CONFIG_ARCH_EXYNOS4) := exynos4 diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index ea5ee4d067f..4b71766fb21 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -7,7 +7,7 @@ config ARM_VIC config ARM_VIC_NR int default 4 if ARCH_S5PV210 - default 3 if ARCH_S5P6442 || ARCH_S5PC100 + default 3 if ARCH_S5PC100 default 2 depends on ARM_VIC help diff --git a/arch/arm/configs/at572d940hfek_defconfig b/arch/arm/configs/at572d940hfek_defconfig deleted file mode 100644 index 1b1158ae8f8..00000000000 --- a/arch/arm/configs/at572d940hfek_defconfig +++ /dev/null @@ -1,358 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_LOCALVERSION="-AT572D940HF" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_TASKSTATS=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_AUDIT=y -CONFIG_CGROUPS=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_SCHED=y -CONFIG_RT_GROUP_SCHED=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT572D940HF=y -CONFIG_MACH_AT572D940HFEB=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_CMDLINE="mem=48M console=ttyS0 initrd=0x21100000,3145728 root=/dev/ram0 rw ip=172.16.1.181" -CONFIG_KEXEC=y -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -CONFIG_NET=y -CONFIG_PACKET=m -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_NET_PKTGEN=m -CONFIG_NET_TCPPROBE=m -CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m -CONFIG_CAN_VCAN=m -CONFIG_CAN_DEBUG_DEVICES=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_CONNECTOR=m -CONFIG_MTD=m -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=1 -CONFIG_MTD_CONCAT=m -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLOCK=m -CONFIG_MTD_BLOCK_RO=m -CONFIG_FTL=m -CONFIG_NFTL=m -CONFIG_NFTL_RW=y -CONFIG_INFTL=m -CONFIG_RFD_FTL=m -CONFIG_SSFDC=m -CONFIG_MTD_OOPS=m -CONFIG_MTD_CFI=m -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_CFI_INTELEXT=m -CONFIG_MTD_CFI_AMDSTD=m -CONFIG_MTD_CFI_STAA=m -CONFIG_MTD_ROM=m -CONFIG_MTD_ABSENT=m -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=m -CONFIG_MTD_PLATRAM=m -CONFIG_MTD_DATAFLASH=m -CONFIG_MTD_M25P80=m -CONFIG_MTD_SLRAM=m -CONFIG_MTD_PHRAM=m -CONFIG_MTD_MTDRAM=m -CONFIG_MTD_BLOCK2MTD=m -CONFIG_MTD_NAND=m -CONFIG_MTD_NAND_VERIFY_WRITE=y -CONFIG_MTD_NAND_DISKONCHIP=m -CONFIG_MTD_NAND_NANDSIM=m -CONFIG_MTD_NAND_PLATFORM=m -CONFIG_MTD_ALAUDA=m -CONFIG_MTD_UBI=m -CONFIG_MTD_UBI_GLUEBI=m -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_ATMEL_TCLIB=y -CONFIG_ATMEL_SSC=m -CONFIG_SENSORS_TSL2550=m -CONFIG_DS1682=m -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=m -CONFIG_SCSI_TGT=m -# CONFIG_SCSI_PROC_FS is not set -CONFIG_BLK_DEV_SD=m -CONFIG_BLK_DEV_SR=m -CONFIG_CHR_DEV_SG=m -CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -CONFIG_MACVLAN=m -CONFIG_EQUALIZER=m -CONFIG_TUN=m -CONFIG_VETH=m -CONFIG_PHYLIB=y -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -CONFIG_BROADCOM_PHY=m -CONFIG_ICPLUS_PHY=m -CONFIG_MDIO_BITBANG=m -CONFIG_NET_ETHERNET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_USB_ZD1201=m -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -# CONFIG_USB_NET_ZAURUS is not set -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_EVDEV=m -CONFIG_INPUT_EVBUG=m -CONFIG_KEYBOARD_LKKBD=m -CONFIG_KEYBOARD_GPIO=m -CONFIG_KEYBOARD_NEWTON=m -CONFIG_KEYBOARD_STOWAWAY=m -CONFIG_KEYBOARD_SUNKBD=m -CONFIG_KEYBOARD_XTKBD=m -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_SERIAL=m -CONFIG_MOUSE_APPLETOUCH=m -CONFIG_MOUSE_VSXXXAA=m -CONFIG_MOUSE_GPIO=m -CONFIG_INPUT_MISC=y -CONFIG_INPUT_UINPUT=m -CONFIG_SERIO_SERPORT=m -CONFIG_SERIO_RAW=m -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_N_HDLC=m -CONFIG_SPECIALIX=m -CONFIG_STALDRV=y -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_IPMI_HANDLER=m -CONFIG_IPMI_DEVICE_INTERFACE=m -CONFIG_IPMI_SI=m -CONFIG_IPMI_WATCHDOG=m -CONFIG_IPMI_POWEROFF=m -CONFIG_HW_RANDOM=y -CONFIG_R3964=m -CONFIG_RAW_DRIVER=m -CONFIG_TCG_TPM=m -CONFIG_TCG_NSC=m -CONFIG_TCG_ATMEL=m -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -CONFIG_SPI_BITBANG=m -CONFIG_SPI_SPIDEV=m -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=m -CONFIG_SND=m -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -# CONFIG_SND_PCM_OSS_PLUGINS is not set -CONFIG_SND_SEQUENCER_OSS=y -CONFIG_SND_DYNAMIC_MINORS=y -# CONFIG_SND_VERBOSE_PROCFS is not set -CONFIG_SND_DUMMY=m -CONFIG_SND_VIRMIDI=m -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_HID=m -CONFIG_HIDRAW=y -CONFIG_USB_HID=m -CONFIG_USB_HIDDEV=y -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_HID_A4TECH=m -CONFIG_HID_APPLE=m -CONFIG_HID_BELKIN=m -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_EZKEY=m -CONFIG_HID_GYRATION=m -CONFIG_HID_LOGITECH=m -CONFIG_HID_MICROSOFT=m -CONFIG_HID_MONTEREY=m -CONFIG_HID_PANTHERLORD=m -CONFIG_HID_PETALYNX=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m -CONFIG_HID_SUNPLUS=m -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=m -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_ISD200=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_STORAGE_ALAUDA=m -CONFIG_USB_STORAGE_KARMA=m -CONFIG_USB_LIBUSUAL=y -CONFIG_USB_SERIAL=m -CONFIG_USB_EZUSB=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_SPCP8X5=m -CONFIG_USB_SERIAL_DEBUG=m -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_ADUTUX=m -CONFIG_USB_TEST=m -CONFIG_USB_GADGET=m -CONFIG_USB_GADGET_DEBUG_FILES=y -CONFIG_USB_GADGET_DEBUG_FS=y -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_MIDI_GADGET=m -CONFIG_MMC=y -CONFIG_SDIO_UART=m -CONFIG_MMC_AT91=m -CONFIG_MMC_SPI=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=m -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_INTF_DEV_UIE_EMUL=y -CONFIG_RTC_DRV_DS1307=m -CONFIG_RTC_DRV_DS1305=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD_DEBUG=y -CONFIG_REISERFS_FS=m -CONFIG_REISERFS_CHECK=y -CONFIG_REISERFS_PROC_INFO=y -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_INOTIFY=y -CONFIG_FUSE_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_NTFS_FS=m -CONFIG_NTFS_RW=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_CMODE_FAVOURLZO=y -CONFIG_CRAMFS=m -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFSD=m -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_CIFS=m -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -CONFIG_LDM_DEBUG=y -CONFIG_SGI_PARTITION=y -CONFIG_SUN_PARTITION=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=m -CONFIG_DLM=m -CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y -CONFIG_DEBUG_FS=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_CRYPTO=y -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261_defconfig index b46025b66b6..ade6b2f2311 100644 --- a/arch/arm/configs/at91sam9261ek_defconfig +++ b/arch/arm/configs/at91sam9261_defconfig @@ -1,9 +1,13 @@ CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_KERNEL_LZMA=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y +CONFIG_NAMESPACES=y +CONFIG_EMBEDDED=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y @@ -15,18 +19,27 @@ CONFIG_ARCH_AT91SAM9261=y CONFIG_MACH_AT91SAM9261EK=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_VFP=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y +CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set +CONFIG_CFG80211=y +CONFIG_LIB80211=y +CONFIG_MAC80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y @@ -34,8 +47,12 @@ CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_TCLIB=y CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y @@ -45,12 +62,27 @@ CONFIG_NET_ETHERNET=y CONFIG_DM9000=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set +CONFIG_USB_ZD1201=m +CONFIG_RTL8187=m +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_SPI=m +CONFIG_RT2X00=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_ZD1211RW=m +CONFIG_INPUT_POLLDEV=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y @@ -65,31 +97,62 @@ CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_FB=y CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_ATMEL_LCDC=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_AT73C213=y +CONFIG_SND_USB_AUDIO=m # CONFIG_USB_HID is not set CONFIG_USB=y CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DEBUG=y CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_AT91=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y +CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_CRAMFS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_UTF8=y +CONFIG_FTRACE=y +CONFIG_CRC_CCITT=m diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263_defconfig index 8a04d6f4e06..1cf96264cba 100644 --- a/arch/arm/configs/at91sam9263ek_defconfig +++ b/arch/arm/configs/at91sam9263_defconfig @@ -1,9 +1,13 @@ CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_KERNEL_LZMA=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y +CONFIG_NAMESPACES=y +CONFIG_EMBEDDED=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y @@ -13,53 +17,81 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9263=y CONFIG_MACH_AT91SAM9263EK=y +CONFIG_MACH_USB_A9263=y +CONFIG_MACH_NEOCORE926=y CONFIG_MTD_AT91_DATAFLASH_CARD=y # CONFIG_ARM_THUMB is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y +CONFIG_AUTO_ZRELADDR=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y +CONFIG_NET_KEY=y CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y +CONFIG_NFTL=y +CONFIG_NFTL_RW=y CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_BLOCK2MTD=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_PWM=y +CONFIG_ATMEL_TCLIB=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y +CONFIG_SMSC_PHY=y +CONFIG_NET_ETHERNET=y CONFIG_MACB=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_USB_ZD1201=m +CONFIG_INPUT_POLLDEV=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO is not set +CONFIG_LEGACY_PTY_COUNT=4 CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y @@ -74,8 +106,25 @@ CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_FB=y CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_ATMEL_LCDC=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_ATMEL_AC97C=y +# CONFIG_SND_SPI is not set +CONFIG_SND_USB_AUDIO=m CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y @@ -83,24 +132,37 @@ CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y +CONFIG_SDIO_UART=m CONFIG_MMC_AT91=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_ATMEL_PWM=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y +CONFIG_FUSE_FS=m CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y +CONFIG_FTRACE=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y +CONFIG_XZ_DEC=y diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig index 2ffba24d2e2..da53ff3b4d7 100644 --- a/arch/arm/configs/exynos4_defconfig +++ b/arch/arm/configs/exynos4_defconfig @@ -8,7 +8,9 @@ CONFIG_ARCH_EXYNOS4=y CONFIG_S3C_LOWLEVEL_UART_PORT=1 CONFIG_MACH_SMDKC210=y CONFIG_MACH_SMDKV310=y +CONFIG_MACH_ARMLEX4210=y CONFIG_MACH_UNIVERSAL_C210=y +CONFIG_MACH_NURI=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y diff --git a/arch/arm/configs/neocore926_defconfig b/arch/arm/configs/neocore926_defconfig deleted file mode 100644 index 462dd1850d1..00000000000 --- a/arch/arm/configs/neocore926_defconfig +++ /dev/null @@ -1,104 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_BLK_DEV_INITRD=y -# CONFIG_COMPAT_BRK is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9263=y -CONFIG_MACH_NEOCORE926=y -CONFIG_MTD_AT91_DATAFLASH_CARD=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -# CONFIG_INET_LRO is not set -CONFIG_IPV6=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_NFTL=y -CONFIG_NFTL_RW=y -CONFIG_MTD_BLOCK2MTD=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC_SMC=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_ATMEL_PWM=y -CONFIG_ATMEL_TCLIB=y -CONFIG_SCSI=y -CONFIG_CHR_DEV_SG=y -CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_DEVKMEM is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_SERIAL_ATMEL_PDC is not set -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -CONFIG_FB=y -CONFIG_FB_ATMEL=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_ATMEL_LCDC=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_LOGO=y -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_MMC=y -CONFIG_SDIO_UART=y -CONFIG_MMC_AT91=m -CONFIG_EXT2_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_AUTOFS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_WBUF_VERIFY=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/s5p6442_defconfig b/arch/arm/configs/s5p6442_defconfig deleted file mode 100644 index 0e92a784af6..00000000000 --- a/arch/arm/configs/s5p6442_defconfig +++ /dev/null @@ -1,65 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S5P6442=y -CONFIG_S3C_LOWLEVEL_UART_PORT=1 -CONFIG_MACH_SMDK6442=y -CONFIG_CPU_32v6K=y -CONFIG_AEABI=y -CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" -CONFIG_FPE_NWFPE=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_NR_UARTS=3 -CONFIG_SERIAL_SAMSUNG=y -CONFIG_SERIAL_SAMSUNG_CONSOLE=y -CONFIG_HW_RANDOM=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_CRAMFS=y -CONFIG_ROMFS_FS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_RT_MUTEXES=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_ARM_UNWIND is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_S3C_UART=1 -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig deleted file mode 100644 index ee82d09249c..00000000000 --- a/arch/arm/configs/usb-a9263_defconfig +++ /dev/null @@ -1,106 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9263=y -CONFIG_MACH_USB_A9263=y -CONFIG_AT91_SLOW_CLOCK=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200" -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y -CONFIG_BLK_DEV_LOOP=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_EVBUG=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_FUSE_FS=m -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/include/asm/fiq.h b/arch/arm/include/asm/fiq.h index 2242ce22ec6..d493d0b742a 100644 --- a/arch/arm/include/asm/fiq.h +++ b/arch/arm/include/asm/fiq.h @@ -4,6 +4,13 @@ * Support for FIQ on ARM architectures. * Written by Philip Blundell <philb@gnu.org>, 1998 * Re-written by Russell King + * + * NOTE: The FIQ mode registers are not magically preserved across + * suspend/resume. + * + * Drivers which require these registers to be preserved across power + * management operations must implement appropriate suspend/resume handlers to + * save and restore them. */ #ifndef __ASM_FIQ_H @@ -29,9 +36,21 @@ struct fiq_handler { extern int claim_fiq(struct fiq_handler *f); extern void release_fiq(struct fiq_handler *f); extern void set_fiq_handler(void *start, unsigned int length); -extern void set_fiq_regs(struct pt_regs *regs); -extern void get_fiq_regs(struct pt_regs *regs); extern void enable_fiq(int fiq); extern void disable_fiq(int fiq); +/* helpers defined in fiqasm.S: */ +extern void __set_fiq_regs(unsigned long const *regs); +extern void __get_fiq_regs(unsigned long *regs); + +static inline void set_fiq_regs(struct pt_regs const *regs) +{ + __set_fiq_regs(®s->ARM_r8); +} + +static inline void get_fiq_regs(struct pt_regs *regs) +{ + __get_fiq_regs(®s->ARM_r8); +} + #endif diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index bf13b814c1b..946f4d778f7 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -18,6 +18,8 @@ struct machine_desc { unsigned int nr; /* architecture number */ const char *name; /* architecture name */ unsigned long boot_params; /* tagged list */ + const char **dt_compat; /* array of device tree + * 'compatible' strings */ unsigned int nr_irqs; /* number of IRQs */ @@ -48,6 +50,13 @@ struct machine_desc { extern struct machine_desc *machine_desc; /* + * Machine type table - also only accessible during boot + */ +extern struct machine_desc __arch_info_begin[], __arch_info_end[]; +#define for_each_machine_desc(p) \ + for (p = __arch_info_begin; p < __arch_info_end; p++) + +/* * Set of macros to define architecture features. This is built into * a table by the linker. */ diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index f51a69595f6..ac75d084888 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -197,7 +197,7 @@ typedef unsigned long pgprot_t; typedef struct page *pgtable_t; -#ifndef CONFIG_SPARSEMEM +#ifdef CONFIG_HAVE_ARCH_PFN_VALID extern int pfn_valid(unsigned long); #endif diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h new file mode 100644 index 00000000000..11b8708fc4d --- /dev/null +++ b/arch/arm/include/asm/prom.h @@ -0,0 +1,37 @@ +/* + * arch/arm/include/asm/prom.h + * + * Copyright (C) 2009 Canonical Ltd. <jeremy.kerr@canonical.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef __ASMARM_PROM_H +#define __ASMARM_PROM_H + +#ifdef CONFIG_OF + +#include <asm/setup.h> +#include <asm/irq.h> + +static inline void irq_dispose_mapping(unsigned int virq) +{ + return; +} + +extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys); +extern void arm_dt_memblock_reserve(void); + +#else /* CONFIG_OF */ + +static inline struct machine_desc *setup_machine_fdt(unsigned int dt_phys) +{ + return NULL; +} + +static inline void arm_dt_memblock_reserve(void) { } + +#endif /* CONFIG_OF */ +#endif /* ASMARM_PROM_H */ diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 95176af3df8..ee2ad8ae07a 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -217,6 +217,10 @@ extern struct meminfo meminfo; #define bank_phys_end(bank) ((bank)->start + (bank)->size) #define bank_phys_size(bank) (bank)->size +extern int arm_add_memory(phys_addr_t start, unsigned long size); +extern void early_print(const char *str, ...); +extern void dump_machine_table(void); + #endif /* __KERNEL__ */ #endif diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index d2b514fd76f..e42d96a45d3 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -70,6 +70,7 @@ extern void platform_smp_prepare_cpus(unsigned int); */ struct secondary_data { unsigned long pgdir; + unsigned long swapper_pg_dir; void *stack; }; extern struct secondary_data secondary_data; diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 87dbe3e2197..2c04ed5efeb 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -400,6 +400,8 @@ #define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371) #define __NR_clock_adjtime (__NR_SYSCALL_BASE+372) #define __NR_syncfs (__NR_SYSCALL_BASE+373) +#define __NR_sendmmsg (__NR_SYSCALL_BASE+374) +#define __NR_setns (__NR_SYSCALL_BASE+375) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 8d95446150a..a5b31af5c2b 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -24,7 +24,7 @@ obj-$(CONFIG_OC_ETM) += etm.o obj-$(CONFIG_ISA_DMA_API) += dma.o obj-$(CONFIG_ARCH_ACORN) += ecard.o -obj-$(CONFIG_FIQ) += fiq.o +obj-$(CONFIG_FIQ) += fiq.o fiqasm.o obj-$(CONFIG_MODULES) += armksyms.o module.o obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o @@ -44,6 +44,7 @@ obj-$(CONFIG_ARM_THUMBEE) += thumbee.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_ARM_UNWIND) += unwind.o obj-$(CONFIG_HAVE_TCM) += tcm.o +obj-$(CONFIG_OF) += devtree.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_SWP_EMULATE) += swp_emulate.o CFLAGS_swp_emulate.o := -Wa,-march=armv7-a diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 7fbf28c35bb..80f7896cc01 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -383,6 +383,8 @@ CALL(sys_open_by_handle_at) CALL(sys_clock_adjtime) CALL(sys_syncfs) + CALL(sys_sendmmsg) +/* 375 */ CALL(sys_setns) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c new file mode 100644 index 00000000000..a701e4226a6 --- /dev/null +++ b/arch/arm/kernel/devtree.c @@ -0,0 +1,145 @@ +/* + * linux/arch/arm/kernel/devtree.c + * + * Copyright (C) 2009 Canonical Ltd. <jeremy.kerr@canonical.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/bootmem.h> +#include <linux/memblock.h> +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> + +#include <asm/setup.h> +#include <asm/page.h> +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +void __init early_init_dt_add_memory_arch(u64 base, u64 size) +{ + arm_add_memory(base, size); +} + +void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) +{ + return alloc_bootmem_align(size, align); +} + +void __init arm_dt_memblock_reserve(void) +{ + u64 *reserve_map, base, size; + + if (!initial_boot_params) + return; + + /* Reserve the dtb region */ + memblock_reserve(virt_to_phys(initial_boot_params), + be32_to_cpu(initial_boot_params->totalsize)); + + /* + * Process the reserve map. This will probably overlap the initrd + * and dtb locations which are already reserved, but overlaping + * doesn't hurt anything + */ + reserve_map = ((void*)initial_boot_params) + + be32_to_cpu(initial_boot_params->off_mem_rsvmap); + while (1) { + base = be64_to_cpup(reserve_map++); + size = be64_to_cpup(reserve_map++); + if (!size) + break; + memblock_reserve(base, size); + } +} + +/** + * setup_machine_fdt - Machine setup when an dtb was passed to the kernel + * @dt_phys: physical address of dt blob + * + * If a dtb was passed to the kernel in r2, then use it to choose the + * correct machine_desc and to setup the system. + */ +struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) +{ + struct boot_param_header *devtree; + struct machine_desc *mdesc, *mdesc_best = NULL; + unsigned int score, mdesc_score = ~1; + unsigned long dt_root; + const char *model; + + devtree = phys_to_virt(dt_phys); + + /* check device tree validity */ + if (be32_to_cpu(devtree->magic) != OF_DT_HEADER) + return NULL; + + /* Search the mdescs for the 'best' compatible value match */ + initial_boot_params = devtree; + dt_root = of_get_flat_dt_root(); + for_each_machine_desc(mdesc) { + score = of_flat_dt_match(dt_root, mdesc->dt_compat); + if (score > 0 && score < mdesc_score) { + mdesc_best = mdesc; + mdesc_score = score; + } + } + if (!mdesc_best) { + const char *prop; + long size; + + early_print("\nError: unrecognized/unsupported " + "device tree compatible list:\n[ "); + + prop = of_get_flat_dt_prop(dt_root, "compatible", &size); + while (size > 0) { + early_print("'%s' ", prop); + size -= strlen(prop) + 1; + prop += strlen(prop) + 1; + } + early_print("]\n\n"); + + dump_machine_table(); /* does not return */ + } + + model = of_get_flat_dt_prop(dt_root, "model", NULL); + if (!model) + model = of_get_flat_dt_prop(dt_root, "compatible", NULL); + if (!model) + model = "<unknown>"; + pr_info("Machine: %s, model: %s\n", mdesc_best->name, model); + + /* Retrieve various information from the /chosen node */ + of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line); + /* Initialize {size,address}-cells info */ + of_scan_flat_dt(early_init_dt_scan_root, NULL); + /* Setup memory, calling early_init_dt_add_memory_arch */ + of_scan_flat_dt(early_init_dt_scan_memory, NULL); + + /* Change machine number to match the mdesc we're using */ + __machine_arch_type = mdesc_best->nr; + + return mdesc_best; +} + +/** + * irq_create_of_mapping - Hook to resolve OF irq specifier into a Linux irq# + * + * Currently the mapping mechanism is trivial; simple flat hwirq numbers are + * mapped 1:1 onto Linux irq numbers. Cascaded irq controllers are not + * supported. + */ +unsigned int irq_create_of_mapping(struct device_node *controller, + const u32 *intspec, unsigned int intsize) +{ + return intspec[0]; +} +EXPORT_SYMBOL_GPL(irq_create_of_mapping); diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index e72dc34eea1..4c164ece589 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c @@ -89,47 +89,6 @@ void set_fiq_handler(void *start, unsigned int length) flush_icache_range(0x1c, 0x1c + length); } -/* - * Taking an interrupt in FIQ mode is death, so both these functions - * disable irqs for the duration. Note - these functions are almost - * entirely coded in assembly. - */ -void __naked set_fiq_regs(struct pt_regs *regs) -{ - register unsigned long tmp; - asm volatile ( - "mov ip, sp\n\ - stmfd sp!, {fp, ip, lr, pc}\n\ - sub fp, ip, #4\n\ - mrs %0, cpsr\n\ - msr cpsr_c, %2 @ select FIQ mode\n\ - mov r0, r0\n\ - ldmia %1, {r8 - r14}\n\ - msr cpsr_c, %0 @ return to SVC mode\n\ - mov r0, r0\n\ - ldmfd sp, {fp, sp, pc}" - : "=&r" (tmp) - : "r" (®s->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE)); -} - -void __naked get_fiq_regs(struct pt_regs *regs) -{ - register unsigned long tmp; - asm volatile ( - "mov ip, sp\n\ - stmfd sp!, {fp, ip, lr, pc}\n\ - sub fp, ip, #4\n\ - mrs %0, cpsr\n\ - msr cpsr_c, %2 @ select FIQ mode\n\ - mov r0, r0\n\ - stmia %1, {r8 - r14}\n\ - msr cpsr_c, %0 @ return to SVC mode\n\ - mov r0, r0\n\ - ldmfd sp, {fp, sp, pc}" - : "=&r" (tmp) - : "r" (®s->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE)); -} - int claim_fiq(struct fiq_handler *f) { int ret = 0; @@ -174,8 +133,8 @@ void disable_fiq(int fiq) } EXPORT_SYMBOL(set_fiq_handler); -EXPORT_SYMBOL(set_fiq_regs); -EXPORT_SYMBOL(get_fiq_regs); +EXPORT_SYMBOL(__set_fiq_regs); /* defined in fiqasm.S */ +EXPORT_SYMBOL(__get_fiq_regs); /* defined in fiqasm.S */ EXPORT_SYMBOL(claim_fiq); EXPORT_SYMBOL(release_fiq); EXPORT_SYMBOL(enable_fiq); diff --git a/arch/arm/kernel/fiqasm.S b/arch/arm/kernel/fiqasm.S new file mode 100644 index 00000000000..207f9d65201 --- /dev/null +++ b/arch/arm/kernel/fiqasm.S @@ -0,0 +1,49 @@ +/* + * linux/arch/arm/kernel/fiqasm.S + * + * Derived from code originally in linux/arch/arm/kernel/fiq.c: + * + * Copyright (C) 1998 Russell King + * Copyright (C) 1998, 1999 Phil Blundell + * Copyright (C) 2011, Linaro Limited + * + * FIQ support written by Philip Blundell <philb@gnu.org>, 1998. + * + * FIQ support re-written by Russell King to be more generic + * + * v7/Thumb-2 compatibility modifications by Linaro Limited, 2011. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +/* + * Taking an interrupt in FIQ mode is death, so both these functions + * disable irqs for the duration. + */ + +ENTRY(__set_fiq_regs) + mov r2, #PSR_I_BIT | PSR_F_BIT | FIQ_MODE + mrs r1, cpsr + msr cpsr_c, r2 @ select FIQ mode + mov r0, r0 @ avoid hazard prior to ARMv4 + ldmia r0!, {r8 - r12} + ldr sp, [r0], #4 + ldr lr, [r0] + msr cpsr_c, r1 @ return to SVC mode + mov r0, r0 @ avoid hazard prior to ARMv4 + mov pc, lr +ENDPROC(__set_fiq_regs) + +ENTRY(__get_fiq_regs) + mov r2, #PSR_I_BIT | PSR_F_BIT | FIQ_MODE + mrs r1, cpsr + msr cpsr_c, r2 @ select FIQ mode + mov r0, r0 @ avoid hazard prior to ARMv4 + stmia r0!, {r8 - r12} + str sp, [r0], #4 + str lr, [r0] + msr cpsr_c, r1 @ return to SVC mode + mov r0, r0 @ avoid hazard prior to ARMv4 + mov pc, lr +ENDPROC(__get_fiq_regs) diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index c84b57d27d0..854bd22380d 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -15,6 +15,12 @@ #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2) #define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2) +#ifdef CONFIG_CPU_BIG_ENDIAN +#define OF_DT_MAGIC 0xd00dfeed +#else +#define OF_DT_MAGIC 0xedfe0dd0 /* 0xd00dfeed in big-endian */ +#endif + /* * Exception handling. Something went wrong and we can't proceed. We * ought to tell the user, but since we don't have any guarantee that @@ -28,20 +34,26 @@ /* Determine validity of the r2 atags pointer. The heuristic requires * that the pointer be aligned, in the first 16k of physical RAM and - * that the ATAG_CORE marker is first and present. Future revisions + * that the ATAG_CORE marker is first and present. If CONFIG_OF_FLATTREE + * is selected, then it will also accept a dtb pointer. Future revisions * of this function may be more lenient with the physical address and * may also be able to move the ATAGS block if necessary. * * Returns: - * r2 either valid atags pointer, or zero + * r2 either valid atags pointer, valid dtb pointer, or zero * r5, r6 corrupted */ __vet_atags: tst r2, #0x3 @ aligned? bne 1f - ldr r5, [r2, #0] @ is first tag ATAG_CORE? - cmp r5, #ATAG_CORE_SIZE + ldr r5, [r2, #0] +#ifdef CONFIG_OF_FLATTREE + ldr r6, =OF_DT_MAGIC @ is it a DTB? + cmp r5, r6 + beq 2f +#endif + cmp r5, #ATAG_CORE_SIZE @ is first tag ATAG_CORE? cmpne r5, #ATAG_CORE_SIZE_EMPTY bne 1f ldr r5, [r2, #4] @@ -49,7 +61,7 @@ __vet_atags: cmp r5, r6 bne 1f - mov pc, lr @ atag pointer is ok +2: mov pc, lr @ atag/dtb pointer is ok 1: mov r2, #0 mov pc, lr @@ -61,7 +73,7 @@ ENDPROC(__vet_atags) * * r0 = cp#15 control register * r1 = machine ID - * r2 = atags pointer + * r2 = atags/dtb pointer * r9 = processor ID */ __INIT diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index c9173cfbbc7..278c1b0ebb2 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -59,7 +59,7 @@ * * This is normally called from the decompressor code. The requirements * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0, - * r1 = machine nr, r2 = atags pointer. + * r1 = machine nr, r2 = atags or dtb pointer. * * This code is mostly position independent, so if you link the kernel at * 0xc0008000, you call this at __pa(0xc0008000). @@ -91,7 +91,7 @@ ENTRY(stext) #endif /* - * r1 = machine no, r2 = atags, + * r1 = machine no, r2 = atags or dtb, * r8 = phys_offset, r9 = cpuid, r10 = procinfo */ bl __vet_atags @@ -113,6 +113,7 @@ ENTRY(stext) ldr r13, =__mmap_switched @ address to jump to after @ mmu has been enabled adr lr, BSYM(1f) @ return (PIC) address + mov r8, r4 @ set TTBR1 to swapper_pg_dir ARM( add pc, r10, #PROCINFO_INITFUNC ) THUMB( add r12, r10, #PROCINFO_INITFUNC ) THUMB( mov pc, r12 ) @@ -302,8 +303,10 @@ ENTRY(secondary_startup) */ adr r4, __secondary_data ldmia r4, {r5, r7, r12} @ address to jump to after - sub r4, r4, r5 @ mmu has been enabled - ldr r4, [r7, r4] @ get secondary_data.pgdir + sub lr, r4, r5 @ mmu has been enabled + ldr r4, [r7, lr] @ get secondary_data.pgdir + add r7, r7, #4 + ldr r8, [r7, lr] @ get secondary_data.swapper_pg_dir adr lr, BSYM(__enable_mmu) @ return address mov r13, r12 @ __secondary_switched address ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor @@ -339,7 +342,7 @@ __secondary_data: * * r0 = cp#15 control register * r1 = machine ID - * r2 = atags pointer + * r2 = atags or dtb pointer * r4 = page table pointer * r9 = processor ID * r13 = *virtual* address to jump to upon completion @@ -376,7 +379,7 @@ ENDPROC(__enable_mmu) * * r0 = cp#15 control register * r1 = machine ID - * r2 = atags pointer + * r2 = atags or dtb pointer * r9 = processor ID * r13 = *virtual* address to jump to upon completion * diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 6dce209a623..ed11fb08b05 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -20,6 +20,7 @@ #include <linux/screen_info.h> #include <linux/init.h> #include <linux/kexec.h> +#include <linux/of_fdt.h> #include <linux/crash_dump.h> #include <linux/root_dev.h> #include <linux/cpu.h> @@ -42,6 +43,7 @@ #include <asm/cachetype.h> #include <asm/tlbflush.h> +#include <asm/prom.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> @@ -309,7 +311,7 @@ static void __init cacheid_init(void) */ extern struct proc_info_list *lookup_processor_type(unsigned int); -static void __init early_print(const char *str, ...) +void __init early_print(const char *str, ...) { extern void printascii(const char *); char buf[256]; @@ -439,25 +441,12 @@ void cpu_init(void) : "r14"); } -static struct machine_desc * __init setup_machine(unsigned int nr) +void __init dump_machine_table(void) { - extern struct machine_desc __arch_info_begin[], __arch_info_end[]; struct machine_desc *p; - /* - * locate machine in the list of supported machines. - */ - for (p = __arch_info_begin; p < __arch_info_end; p++) - if (nr == p->nr) { - printk("Machine: %s\n", p->name); - return p; - } - - early_print("\n" - "Error: unrecognized/unsupported machine ID (r1 = 0x%08x).\n\n" - "Available machine support:\n\nID (hex)\tNAME\n", nr); - - for (p = __arch_info_begin; p < __arch_info_end; p++) + early_print("Available machine support:\n\nID (hex)\tNAME\n"); + for_each_machine_desc(p) early_print("%08x\t%s\n", p->nr, p->name); early_print("\nPlease check your kernel config and/or bootloader.\n"); @@ -466,7 +455,7 @@ static struct machine_desc * __init setup_machine(unsigned int nr) /* can't use cpu_relax() here as it may require MMU setup */; } -static int __init arm_add_memory(phys_addr_t start, unsigned long size) +int __init arm_add_memory(phys_addr_t start, unsigned long size) { struct membank *bank = &meminfo.bank[meminfo.nr_banks]; @@ -801,23 +790,29 @@ static void __init squash_mem_tags(struct tag *tag) tag->hdr.tag = ATAG_NONE; } -void __init setup_arch(char **cmdline_p) +static struct machine_desc * __init setup_machine_tags(unsigned int nr) { struct tag *tags = (struct tag *)&init_tags; - struct machine_desc *mdesc; + struct machine_desc *mdesc = NULL, *p; char *from = default_command_line; init_tags.mem.start = PHYS_OFFSET; - unwind_init(); - - setup_processor(); - mdesc = setup_machine(machine_arch_type); - machine_desc = mdesc; - machine_name = mdesc->name; + /* + * locate machine in the list of supported machines. + */ + for_each_machine_desc(p) + if (nr == p->nr) { + printk("Machine: %s\n", p->name); + mdesc = p; + break; + } - if (mdesc->soft_reboot) - reboot_setup("s"); + if (!mdesc) { + early_print("\nError: unrecognized/unsupported machine ID" + " (r1 = 0x%08x).\n\n", nr); + dump_machine_table(); /* does not return */ + } if (__atags_pointer) tags = phys_to_virt(__atags_pointer); @@ -849,8 +844,17 @@ void __init setup_arch(char **cmdline_p) if (tags->hdr.tag != ATAG_CORE) convert_to_tag_list(tags); #endif - if (tags->hdr.tag != ATAG_CORE) + + if (tags->hdr.tag != ATAG_CORE) { +#if defined(CONFIG_OF) + /* + * If CONFIG_OF is set, then assume this is a reasonably + * modern system that should pass boot parameters + */ + early_print("Warning: Neither atags nor dtb found\n"); +#endif tags = (struct tag *)&init_tags; + } if (mdesc->fixup) mdesc->fixup(mdesc, tags, &from, &meminfo); @@ -862,14 +866,34 @@ void __init setup_arch(char **cmdline_p) parse_tags(tags); } + /* parse_early_param needs a boot_command_line */ + strlcpy(boot_command_line, from, COMMAND_LINE_SIZE); + + return mdesc; +} + + +void __init setup_arch(char **cmdline_p) +{ + struct machine_desc *mdesc; + + unwind_init(); + + setup_processor(); + mdesc = setup_machine_fdt(__atags_pointer); + if (!mdesc) + mdesc = setup_machine_tags(machine_arch_type); + machine_desc = mdesc; + machine_name = mdesc->name; + + if (mdesc->soft_reboot) + reboot_setup("s"); + init_mm.start_code = (unsigned long) _text; init_mm.end_code = (unsigned long) _etext; init_mm.end_data = (unsigned long) _edata; init_mm.brk = (unsigned long) _end; - /* parse_early_param needs a boot_command_line */ - strlcpy(boot_command_line, from, COMMAND_LINE_SIZE); - /* populate cmd_line too for later use, preserving boot_command_line */ strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = cmd_line; @@ -881,6 +905,8 @@ void __init setup_arch(char **cmdline_p) paging_init(mdesc); request_standard_resources(mdesc); + unflatten_device_tree(); + #ifdef CONFIG_SMP if (is_smp()) smp_init_cpus(); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index d439a8f4c07..344e52b16c8 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -105,6 +105,7 @@ int __cpuinit __cpu_up(unsigned int cpu) */ secondary_data.stack = task_stack_page(idle) + THREAD_START_SP; secondary_data.pgdir = virt_to_phys(pgd); + secondary_data.swapper_pg_dir = virt_to_phys(swapper_pg_dir); __cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data)); outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1)); diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S index 6dc06487f3c..c562f649734 100644 --- a/arch/arm/lib/lib1funcs.S +++ b/arch/arm/lib/lib1funcs.S @@ -35,7 +35,7 @@ Boston, MA 02111-1307, USA. */ #include <linux/linkage.h> #include <asm/assembler.h> - +#include <asm/unwind.h> .macro ARM_DIV_BODY dividend, divisor, result, curbit @@ -207,6 +207,7 @@ Boston, MA 02111-1307, USA. */ ENTRY(__udivsi3) ENTRY(__aeabi_uidiv) +UNWIND(.fnstart) subs r2, r1, #1 moveq pc, lr @@ -230,10 +231,12 @@ ENTRY(__aeabi_uidiv) mov r0, r0, lsr r2 mov pc, lr +UNWIND(.fnend) ENDPROC(__udivsi3) ENDPROC(__aeabi_uidiv) ENTRY(__umodsi3) +UNWIND(.fnstart) subs r2, r1, #1 @ compare divisor with 1 bcc Ldiv0 @@ -247,10 +250,12 @@ ENTRY(__umodsi3) mov pc, lr +UNWIND(.fnend) ENDPROC(__umodsi3) ENTRY(__divsi3) ENTRY(__aeabi_idiv) +UNWIND(.fnstart) cmp r1, #0 eor ip, r0, r1 @ save the sign of the result. @@ -287,10 +292,12 @@ ENTRY(__aeabi_idiv) rsbmi r0, r0, #0 mov pc, lr +UNWIND(.fnend) ENDPROC(__divsi3) ENDPROC(__aeabi_idiv) ENTRY(__modsi3) +UNWIND(.fnstart) cmp r1, #0 beq Ldiv0 @@ -310,11 +317,14 @@ ENTRY(__modsi3) rsbmi r0, r0, #0 mov pc, lr +UNWIND(.fnend) ENDPROC(__modsi3) #ifdef CONFIG_AEABI ENTRY(__aeabi_uidivmod) +UNWIND(.fnstart) +UNWIND(.save {r0, r1, ip, lr} ) stmfd sp!, {r0, r1, ip, lr} bl __aeabi_uidiv @@ -323,10 +333,12 @@ ENTRY(__aeabi_uidivmod) sub r1, r1, r3 mov pc, lr +UNWIND(.fnend) ENDPROC(__aeabi_uidivmod) ENTRY(__aeabi_idivmod) - +UNWIND(.fnstart) +UNWIND(.save {r0, r1, ip, lr} ) stmfd sp!, {r0, r1, ip, lr} bl __aeabi_idiv ldmfd sp!, {r1, r2, ip, lr} @@ -334,15 +346,18 @@ ENTRY(__aeabi_idivmod) sub r1, r1, r3 mov pc, lr +UNWIND(.fnend) ENDPROC(__aeabi_idivmod) #endif Ldiv0: - +UNWIND(.fnstart) +UNWIND(.pad #4) +UNWIND(.save {lr}) str lr, [sp, #-8]! bl __div0 mov r0, #0 @ About as wrong as it could be. ldr pc, [sp], #8 - - +UNWIND(.fnend) +ENDPROC(Ldiv0) diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 2d299bf5d72..22484670e7b 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -3,9 +3,6 @@ if ARCH_AT91 config HAVE_AT91_DATAFLASH_CARD bool -config HAVE_NAND_ATMEL_BUSWIDTH_16 - bool - config HAVE_AT91_USART3 bool @@ -85,11 +82,6 @@ config ARCH_AT91CAP9 select HAVE_FB_ATMEL select HAVE_NET_MACB -config ARCH_AT572D940HF - bool "AT572D940HF" - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - config ARCH_AT91X40 bool "AT91x40" select ARCH_USES_GETTIMEOFFSET @@ -209,7 +201,6 @@ comment "AT91SAM9260 / AT91SAM9XE Board Type" config MACH_AT91SAM9260EK bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> @@ -270,7 +261,6 @@ comment "AT91SAM9261 Board Type" config MACH_AT91SAM9261EK bool "Atmel AT91SAM9261-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> @@ -286,7 +276,6 @@ comment "AT91SAM9G10 Board Type" config MACH_AT91SAM9G10EK bool "Atmel AT91SAM9G10-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> @@ -302,7 +291,6 @@ comment "AT91SAM9263 Board Type" config MACH_AT91SAM9263EK bool "Atmel AT91SAM9263-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> @@ -343,7 +331,6 @@ comment "AT91SAM9G20 Board Type" config MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit that embeds only one SD/MMC slot. @@ -351,7 +338,6 @@ config MACH_AT91SAM9G20EK config MACH_AT91SAM9G20EK_2MMC depends on MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and @@ -416,7 +402,6 @@ comment "AT91SAM9G45 Board Type" config MACH_AT91SAM9M10G45EK bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit. "ES" at the end of the name means that this board is an @@ -433,7 +418,6 @@ comment "AT91CAP9 Board Type" config MACH_AT91CAP9ADK bool "Atmel AT91CAP9A-DK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138> @@ -442,23 +426,6 @@ endif # ---------------------------------------------------------- -if ARCH_AT572D940HF - -comment "AT572D940HF Board Type" - -config MACH_AT572D940HFEB - bool "AT572D940HF-EK" - depends on ARCH_AT572D940HF - select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 - help - Select this if you are using Atmel's AT572D940HF-EK evaluation kit. - <http://www.atmel.com/products/diopsis/default.asp> - -endif - -# ---------------------------------------------------------- - if ARCH_AT91X40 comment "AT91X40 Board Type" @@ -483,13 +450,6 @@ config MTD_AT91_DATAFLASH_CARD help Enable support for the DataFlash card. -config MTD_NAND_ATMEL_BUSWIDTH_16 - bool "Enable 16-bit data bus interface to NAND flash" - depends on HAVE_NAND_ATMEL_BUSWIDTH_16 - help - On AT91SAM926x boards both types of NAND flash can be present - (8 and 16 bit data bus width). - # ---------------------------------------------------------- comment "AT91 Feature Selections" diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index a83835e0c18..96966231920 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devi obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o -obj-$(CONFIG_ARCH_AT572D940HF) += at572d940hf.o at91sam926x_time.o at572d940hf_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o # AT91RM9200 board-specific support @@ -78,9 +77,6 @@ obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o # AT91CAP9 board-specific support obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o -# AT572D940HF board-specific support -obj-$(CONFIG_MACH_AT572D940HFEB) += board-at572d940hf_ek.o - # AT91X40 board-specific support obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o diff --git a/arch/arm/mach-at91/at572d940hf.c b/arch/arm/mach-at91/at572d940hf.c deleted file mode 100644 index a6b9c68c003..00000000000 --- a/arch/arm/mach-at91/at572d940hf.c +++ /dev/null @@ -1,377 +0,0 @@ -/* - * arch/arm/mach-at91/at572d940hf.c - * - * Antonio R. Costa <costa.antonior@gmail.com> - * Copyright (C) 2008 Atmel - * - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <linux/module.h> - -#include <asm/mach/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/at572d940hf.h> -#include <mach/at91_pmc.h> -#include <mach/at91_rstc.h> - -#include "generic.h" -#include "clock.h" - -static struct map_desc at572d940hf_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT572D940HF_SRAM_SIZE, - .pfn = __phys_to_pfn(AT572D940HF_SRAM_BASE), - .length = AT572D940HF_SRAM_SIZE, - .type = MT_DEVICE, - }, -}; - -/* -------------------------------------------------------------------- - * Clocks - * -------------------------------------------------------------------- */ - -/* - * The peripheral clocks. - */ -static struct clk pioA_clk = { - .name = "pioA_clk", - .pmc_mask = 1 << AT572D940HF_ID_PIOA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioB_clk = { - .name = "pioB_clk", - .pmc_mask = 1 << AT572D940HF_ID_PIOB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioC_clk = { - .name = "pioC_clk", - .pmc_mask = 1 << AT572D940HF_ID_PIOC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk macb_clk = { - .name = "macb_clk", - .pmc_mask = 1 << AT572D940HF_ID_EMAC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart0_clk = { - .name = "usart0_clk", - .pmc_mask = 1 << AT572D940HF_ID_US0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .pmc_mask = 1 << AT572D940HF_ID_US1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .pmc_mask = 1 << AT572D940HF_ID_US2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc_clk = { - .name = "mci_clk", - .pmc_mask = 1 << AT572D940HF_ID_MCI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk udc_clk = { - .name = "udc_clk", - .pmc_mask = 1 << AT572D940HF_ID_UDP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi0_clk = { - .name = "twi0_clk", - .pmc_mask = 1 << AT572D940HF_ID_TWI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi0_clk = { - .name = "spi0_clk", - .pmc_mask = 1 << AT572D940HF_ID_SPI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi1_clk = { - .name = "spi1_clk", - .pmc_mask = 1 << AT572D940HF_ID_SPI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc0_clk = { - .name = "ssc0_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc1_clk = { - .name = "ssc1_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc2_clk = { - .name = "ssc2_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc0_clk = { - .name = "tc0_clk", - .pmc_mask = 1 << AT572D940HF_ID_TC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc1_clk = { - .name = "tc1_clk", - .pmc_mask = 1 << AT572D940HF_ID_TC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc2_clk = { - .name = "tc2_clk", - .pmc_mask = 1 << AT572D940HF_ID_TC2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 1 << AT572D940HF_ID_UHP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc3_clk = { - .name = "ssc3_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC3, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi1_clk = { - .name = "twi1_clk", - .pmc_mask = 1 << AT572D940HF_ID_TWI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk can0_clk = { - .name = "can0_clk", - .pmc_mask = 1 << AT572D940HF_ID_CAN0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk can1_clk = { - .name = "can1_clk", - .pmc_mask = 1 << AT572D940HF_ID_CAN1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mAgicV_clk = { - .name = "mAgicV_clk", - .pmc_mask = 1 << AT572D940HF_ID_MSIRQ0, - .type = CLK_TYPE_PERIPHERAL, -}; - - -static struct clk *periph_clocks[] __initdata = { - &pioA_clk, - &pioB_clk, - &pioC_clk, - &macb_clk, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &mmc_clk, - &udc_clk, - &twi0_clk, - &spi0_clk, - &spi1_clk, - &ssc0_clk, - &ssc1_clk, - &ssc2_clk, - &tc0_clk, - &tc1_clk, - &tc2_clk, - &ohci_clk, - &ssc3_clk, - &twi1_clk, - &can0_clk, - &can1_clk, - &mAgicV_clk, - /* irq0 .. irq2 */ -}; - -/* - * The five programmable clocks. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 1, -}; -static struct clk pck2 = { - .name = "pck2", - .pmc_mask = AT91_PMC_PCK2, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 2, -}; -static struct clk pck3 = { - .name = "pck3", - .pmc_mask = AT91_PMC_PCK3, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 3, -}; - -static struct clk mAgicV_mem_clk = { - .name = "mAgicV_mem_clk", - .pmc_mask = AT91_PMC_PCK4, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 4, -}; - -/* HClocks */ -static struct clk hck0 = { - .name = "hck0", - .pmc_mask = AT91_PMC_HCK0, - .type = CLK_TYPE_SYSTEM, - .id = 0, -}; -static struct clk hck1 = { - .name = "hck1", - .pmc_mask = AT91_PMC_HCK1, - .type = CLK_TYPE_SYSTEM, - .id = 1, -}; - -static void __init at572d940hf_register_clocks(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) - clk_register(periph_clocks[i]); - - clk_register(&pck0); - clk_register(&pck1); - clk_register(&pck2); - clk_register(&pck3); - clk_register(&mAgicV_mem_clk); - - clk_register(&hck0); - clk_register(&hck1); -} - -/* -------------------------------------------------------------------- - * GPIO - * -------------------------------------------------------------------- */ - -static struct at91_gpio_bank at572d940hf_gpio[] = { - { - .id = AT572D940HF_ID_PIOA, - .offset = AT91_PIOA, - .clock = &pioA_clk, - }, { - .id = AT572D940HF_ID_PIOB, - .offset = AT91_PIOB, - .clock = &pioB_clk, - }, { - .id = AT572D940HF_ID_PIOC, - .offset = AT91_PIOC, - .clock = &pioC_clk, - } -}; - -static void at572d940hf_reset(void) -{ - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); -} - - -/* -------------------------------------------------------------------- - * AT572D940HF processor initialization - * -------------------------------------------------------------------- */ - -void __init at572d940hf_initialize(unsigned long main_clock) -{ - /* Map peripherals */ - iotable_init(at572d940hf_io_desc, ARRAY_SIZE(at572d940hf_io_desc)); - - at91_arch_reset = at572d940hf_reset; - at91_extern_irq = (1 << AT572D940HF_ID_IRQ0) | (1 << AT572D940HF_ID_IRQ1) - | (1 << AT572D940HF_ID_IRQ2); - - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at572d940hf_register_clocks(); - - /* Register GPIO subsystem */ - at91_gpio_init(at572d940hf_gpio, 3); -} - -/* -------------------------------------------------------------------- - * Interrupt initialization - * -------------------------------------------------------------------- */ - -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at572d940hf_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller */ - 7, /* System Peripherals */ - 0, /* Parallel IO Controller A */ - 0, /* Parallel IO Controller B */ - 0, /* Parallel IO Controller C */ - 3, /* Ethernet */ - 6, /* USART 0 */ - 6, /* USART 1 */ - 6, /* USART 2 */ - 0, /* Multimedia Card Interface */ - 4, /* USB Device Port */ - 0, /* Two-Wire Interface 0 */ - 6, /* Serial Peripheral Interface 0 */ - 6, /* Serial Peripheral Interface 1 */ - 5, /* Serial Synchronous Controller 0 */ - 5, /* Serial Synchronous Controller 1 */ - 5, /* Serial Synchronous Controller 2 */ - 0, /* Timer Counter 0 */ - 0, /* Timer Counter 1 */ - 0, /* Timer Counter 2 */ - 3, /* USB Host port */ - 3, /* Serial Synchronous Controller 3 */ - 0, /* Two-Wire Interface 1 */ - 0, /* CAN Controller 0 */ - 0, /* CAN Controller 1 */ - 0, /* mAgicV HALT line */ - 0, /* mAgicV SIRQ0 line */ - 0, /* mAgicV exception line */ - 0, /* mAgicV end of DMA line */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ -}; - -void __init at572d940hf_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at572d940hf_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} - diff --git a/arch/arm/mach-at91/at572d940hf_devices.c b/arch/arm/mach-at91/at572d940hf_devices.c deleted file mode 100644 index 0fc20a24078..00000000000 --- a/arch/arm/mach-at91/at572d940hf_devices.c +++ /dev/null @@ -1,970 +0,0 @@ -/* - * arch/arm/mach-at91/at572d940hf_devices.c - * - * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com> - * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> - * Copyright (C) 2005 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> - -#include <mach/board.h> -#include <mach/gpio.h> -#include <mach/at572d940hf.h> -#include <mach/at572d940hf_matrix.h> -#include <mach/at91sam9_smc.h> - -#include "generic.h" -#include "sam9_smc.h" - - -/* -------------------------------------------------------------------- - * USB Host - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = DMA_BIT_MASK(32); -static struct at91_usbh_data usbh_data; - -static struct resource usbh_resources[] = { - [0] = { - .start = AT572D940HF_UHP_BASE, - .end = AT572D940HF_UHP_BASE + SZ_1M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_UHP, - .end = AT572D940HF_ID_UHP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_usbh_device = { - .name = "at91_ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_data, - }, - .resource = usbh_resources, - .num_resources = ARRAY_SIZE(usbh_resources), -}; - -void __init at91_add_device_usbh(struct at91_usbh_data *data) -{ - if (!data) - return; - - usbh_data = *data; - platform_device_register(&at572d940hf_usbh_device); - -} -#else -void __init at91_add_device_usbh(struct at91_usbh_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * USB Device (Gadget) - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_USB_GADGET_AT91 -static struct at91_udc_data udc_data; - -static struct resource udc_resources[] = { - [0] = { - .start = AT572D940HF_BASE_UDP, - .end = AT572D940HF_BASE_UDP + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_UDP, - .end = AT572D940HF_ID_UDP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_udc_device = { - .name = "at91_udc", - .id = -1, - .dev = { - .platform_data = &udc_data, - }, - .resource = udc_resources, - .num_resources = ARRAY_SIZE(udc_resources), -}; - -void __init at91_add_device_udc(struct at91_udc_data *data) -{ - if (!data) - return; - - if (data->vbus_pin) { - at91_set_gpio_input(data->vbus_pin, 0); - at91_set_deglitch(data->vbus_pin, 1); - } - - /* Pullup pin is handled internally */ - - udc_data = *data; - platform_device_register(&at572d940hf_udc_device); -} -#else -void __init at91_add_device_udc(struct at91_udc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Ethernet - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) -static u64 eth_dmamask = DMA_BIT_MASK(32); -static struct at91_eth_data eth_data; - -static struct resource eth_resources[] = { - [0] = { - .start = AT572D940HF_BASE_EMAC, - .end = AT572D940HF_BASE_EMAC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_EMAC, - .end = AT572D940HF_ID_EMAC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_eth_device = { - .name = "macb", - .id = -1, - .dev = { - .dma_mask = ð_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = ð_data, - }, - .resource = eth_resources, - .num_resources = ARRAY_SIZE(eth_resources), -}; - -void __init at91_add_device_eth(struct at91_eth_data *data) -{ - if (!data) - return; - - if (data->phy_irq_pin) { - at91_set_gpio_input(data->phy_irq_pin, 0); - at91_set_deglitch(data->phy_irq_pin, 1); - } - - /* Only RMII is supported */ - data->is_rmii = 1; - - /* Pins used for RMII */ - at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXCK_EREFCK */ - at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */ - at91_set_A_periph(AT91_PIN_PA18, 0); /* ERX0 */ - at91_set_A_periph(AT91_PIN_PA19, 0); /* ERX1 */ - at91_set_A_periph(AT91_PIN_PA20, 0); /* ERXER */ - at91_set_A_periph(AT91_PIN_PA23, 0); /* ETXEN */ - at91_set_A_periph(AT91_PIN_PA21, 0); /* ETX0 */ - at91_set_A_periph(AT91_PIN_PA22, 0); /* ETX1 */ - at91_set_A_periph(AT91_PIN_PA13, 0); /* EMDIO */ - at91_set_A_periph(AT91_PIN_PA14, 0); /* EMDC */ - - eth_data = *data; - platform_device_register(&at572d940hf_eth_device); -} -#else -void __init at91_add_device_eth(struct at91_eth_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * MMC / SD - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc_data; - -static struct resource mmc_resources[] = { - [0] = { - .start = AT572D940HF_BASE_MCI, - .end = AT572D940HF_BASE_MCI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_MCI, - .end = AT572D940HF_ID_MCI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_mmc_device = { - .name = "at91_mci", - .id = -1, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc_data, - }, - .resource = mmc_resources, - .num_resources = ARRAY_SIZE(mmc_resources), -}; - -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) -{ - if (!data) - return; - - /* input/irq */ - if (data->det_pin) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (data->wp_pin) - at91_set_gpio_input(data->wp_pin, 1); - if (data->vcc_pin) - at91_set_gpio_output(data->vcc_pin, 0); - - /* CLK */ - at91_set_A_periph(AT91_PIN_PC22, 0); - - /* CMD */ - at91_set_A_periph(AT91_PIN_PC23, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PC24, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PC25, 1); - at91_set_A_periph(AT91_PIN_PC26, 1); - at91_set_A_periph(AT91_PIN_PC27, 1); - } - - mmc_data = *data; - platform_device_register(&at572d940hf_mmc_device); -} -#else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * NAND / SmartMedia - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) -static struct atmel_nand_data nand_data; - -#define NAND_BASE AT91_CHIPSELECT_3 - -static struct resource nand_resources[] = { - { - .start = NAND_BASE, - .end = NAND_BASE + SZ_256M - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at572d940hf_nand_device = { - .name = "atmel_nand", - .id = -1, - .dev = { - .platform_data = &nand_data, - }, - .resource = nand_resources, - .num_resources = ARRAY_SIZE(nand_resources), -}; - -void __init at91_add_device_nand(struct atmel_nand_data *data) -{ - unsigned long csa; - - if (!data) - return; - - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); - - /* enable pin */ - if (data->enable_pin) - at91_set_gpio_output(data->enable_pin, 1); - - /* ready/busy pin */ - if (data->rdy_pin) - at91_set_gpio_input(data->rdy_pin, 1); - - /* card detect pin */ - if (data->det_pin) - at91_set_gpio_input(data->det_pin, 1); - - at91_set_A_periph(AT91_PIN_PB28, 0); /* A[22] */ - at91_set_B_periph(AT91_PIN_PA28, 0); /* NANDOE */ - at91_set_B_periph(AT91_PIN_PA29, 0); /* NANDWE */ - - nand_data = *data; - platform_device_register(&at572d940hf_nand_device); -} - -#else -void __init at91_add_device_nand(struct atmel_nand_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * TWI (i2c) - * -------------------------------------------------------------------- */ - -/* - * Prefer the GPIO code since the TWI controller isn't robust - * (gets overruns and underruns under load) and can only issue - * repeated STARTs in one scenario (the driver doesn't yet handle them). - */ - -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) - -static struct i2c_gpio_platform_data pdata = { - .sda_pin = AT91_PIN_PC7, - .sda_is_open_drain = 1, - .scl_pin = AT91_PIN_PC8, - .scl_is_open_drain = 1, - .udelay = 2, /* ~100 kHz */ -}; - -static struct platform_device at572d940hf_twi_device { - .name = "i2c-gpio", - .id = -1, - .dev.platform_data = &pdata, -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - at91_set_GPIO_periph(AT91_PIN_PC7, 1); /* TWD (SDA) */ - at91_set_multi_drive(AT91_PIN_PC7, 1); - - at91_set_GPIO_periph(AT91_PIN_PA8, 1); /* TWCK (SCL) */ - at91_set_multi_drive(AT91_PIN_PC8, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at572d940hf_twi_device); -} - -#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) - -static struct resource twi0_resources[] = { - [0] = { - .start = AT572D940HF_BASE_TWI0, - .end = AT572D940HF_BASE_TWI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_TWI0, - .end = AT572D940HF_ID_TWI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_twi0_device = { - .name = "at91_i2c", - .id = 0, - .resource = twi0_resources, - .num_resources = ARRAY_SIZE(twi0_resources), -}; - -static struct resource twi1_resources[] = { - [0] = { - .start = AT572D940HF_BASE_TWI1, - .end = AT572D940HF_BASE_TWI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_TWI1, - .end = AT572D940HF_ID_TWI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_twi1_device = { - .name = "at91_i2c", - .id = 1, - .resource = twi1_resources, - .num_resources = ARRAY_SIZE(twi1_resources), -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - /* pins used for TWI0 interface */ - at91_set_A_periph(AT91_PIN_PC7, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PC7, 1); - - at91_set_A_periph(AT91_PIN_PC8, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PC8, 1); - - /* pins used for TWI1 interface */ - at91_set_A_periph(AT91_PIN_PC20, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PC20, 1); - - at91_set_A_periph(AT91_PIN_PC21, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PC21, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at572d940hf_twi0_device); - platform_device_register(&at572d940hf_twi1_device); -} -#else -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * SPI - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = DMA_BIT_MASK(32); - -static struct resource spi0_resources[] = { - [0] = { - .start = AT572D940HF_BASE_SPI0, - .end = AT572D940HF_BASE_SPI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_SPI0, - .end = AT572D940HF_ID_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_spi0_device = { - .name = "atmel_spi", - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi0_resources, - .num_resources = ARRAY_SIZE(spi0_resources), -}; - -static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 }; - -static struct resource spi1_resources[] = { - [0] = { - .start = AT572D940HF_BASE_SPI1, - .end = AT572D940HF_BASE_SPI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_SPI1, - .end = AT572D940HF_ID_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_spi1_device = { - .name = "atmel_spi", - .id = 1, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi1_resources, - .num_resources = ARRAY_SIZE(spi1_resources), -}; - -static const unsigned spi1_standard_cs[4] = { AT91_PIN_PC3, AT91_PIN_PC4, AT91_PIN_PC5, AT91_PIN_PC6 }; - -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) -{ - int i; - unsigned long cs_pin; - short enable_spi0 = 0; - short enable_spi1 = 0; - - /* Choose SPI chip-selects */ - for (i = 0; i < nr_devices; i++) { - if (devices[i].controller_data) - cs_pin = (unsigned long) devices[i].controller_data; - else if (devices[i].bus_num == 0) - cs_pin = spi0_standard_cs[devices[i].chip_select]; - else - cs_pin = spi1_standard_cs[devices[i].chip_select]; - - if (devices[i].bus_num == 0) - enable_spi0 = 1; - else - enable_spi1 = 1; - - /* enable chip-select pin */ - at91_set_gpio_output(cs_pin, 1); - - /* pass chip-select pin to driver */ - devices[i].controller_data = (void *) cs_pin; - } - - spi_register_board_info(devices, nr_devices); - - /* Configure SPI bus(es) */ - if (enable_spi0) { - at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ - at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ - at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - - at91_clock_associate("spi0_clk", &at572d940hf_spi0_device.dev, "spi_clk"); - platform_device_register(&at572d940hf_spi0_device); - } - if (enable_spi1) { - at91_set_A_periph(AT91_PIN_PC0, 0); /* SPI1_MISO */ - at91_set_A_periph(AT91_PIN_PC1, 0); /* SPI1_MOSI */ - at91_set_A_periph(AT91_PIN_PC2, 0); /* SPI1_SPCK */ - - at91_clock_associate("spi1_clk", &at572d940hf_spi1_device.dev, "spi_clk"); - platform_device_register(&at572d940hf_spi1_device); - } -} -#else -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * Timer/Counter blocks - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_ATMEL_TCLIB - -static struct resource tcb_resources[] = { - [0] = { - .start = AT572D940HF_BASE_TCB, - .end = AT572D940HF_BASE_TCB + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_TC0, - .end = AT572D940HF_ID_TC0, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = AT572D940HF_ID_TC1, - .end = AT572D940HF_ID_TC1, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = AT572D940HF_ID_TC2, - .end = AT572D940HF_ID_TC2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_tcb_device = { - .name = "atmel_tcb", - .id = 0, - .resource = tcb_resources, - .num_resources = ARRAY_SIZE(tcb_resources), -}; - -static void __init at91_add_device_tc(void) -{ - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at572d940hf_tcb_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at572d940hf_tcb_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at572d940hf_tcb_device.dev, "t2_clk"); - platform_device_register(&at572d940hf_tcb_device); -} -#else -static void __init at91_add_device_tc(void) { } -#endif - - -/* -------------------------------------------------------------------- - * RTT - * -------------------------------------------------------------------- */ - -static struct resource rtt_resources[] = { - { - .start = AT91_BASE_SYS + AT91_RTT, - .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at572d940hf_rtt_device = { - .name = "at91_rtt", - .id = 0, - .resource = rtt_resources, - .num_resources = ARRAY_SIZE(rtt_resources), -}; - -static void __init at91_add_device_rtt(void) -{ - platform_device_register(&at572d940hf_rtt_device); -} - - -/* -------------------------------------------------------------------- - * Watchdog - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) -static struct platform_device at572d940hf_wdt_device = { - .name = "at91_wdt", - .id = -1, - .num_resources = 0, -}; - -static void __init at91_add_device_watchdog(void) -{ - platform_device_register(&at572d940hf_wdt_device); -} -#else -static void __init at91_add_device_watchdog(void) {} -#endif - - -/* -------------------------------------------------------------------- - * UART - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SERIAL_ATMEL) -static struct resource dbgu_resources[] = { - [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data dbgu_data = { - .use_dma_tx = 0, - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), -}; - -static u64 dbgu_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { - .dma_mask = &dbgu_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -}; - -static inline void configure_dbgu_pins(void) -{ - at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ - at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ -} - -static struct resource uart0_resources[] = { - [0] = { - .start = AT572D940HF_BASE_US0, - .end = AT572D940HF_BASE_US0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_US0, - .end = AT572D940HF_ID_US0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart0_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart0_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { - .dma_mask = &uart0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), -}; - -static inline void configure_usart0_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PA8, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PA10, 0); /* RTS0 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PA9, 0); /* CTS0 */ -} - -static struct resource uart1_resources[] = { - [0] = { - .start = AT572D940HF_BASE_US1, - .end = AT572D940HF_BASE_US1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_US1, - .end = AT572D940HF_ID_US1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart1_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart1_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { - .dma_mask = &uart1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), -}; - -static inline void configure_usart1_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PC10, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PC9 , 0); /* RXD1 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PC12, 0); /* RTS1 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS1 */ -} - -static struct resource uart2_resources[] = { - [0] = { - .start = AT572D940HF_BASE_US2, - .end = AT572D940HF_BASE_US2 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_US2, - .end = AT572D940HF_ID_US2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart2_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart2_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { - .dma_mask = &uart2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), -}; - -static inline void configure_usart2_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PC15, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PC14, 0); /* RXD2 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PC17, 0); /* RTS2 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PC16, 0); /* CTS2 */ -} - -static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ - -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -{ - struct platform_device *pdev; - - switch (id) { - case 0: /* DBGU */ - pdev = &at572d940hf_dbgu_device; - configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); - break; - case AT572D940HF_ID_US0: - pdev = &at572d940hf_uart0_device; - configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); - break; - case AT572D940HF_ID_US1: - pdev = &at572d940hf_uart1_device; - configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); - break; - case AT572D940HF_ID_US2: - pdev = &at572d940hf_uart2_device; - configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); - break; - default: - return; - } - pdev->id = portnr; /* update to mapped ID */ - - if (portnr < ATMEL_MAX_UART) - at91_uarts[portnr] = pdev; -} - -void __init at91_set_serial_console(unsigned portnr) -{ - if (portnr < ATMEL_MAX_UART) - atmel_default_console_device = at91_uarts[portnr]; -} - -void __init at91_add_device_serial(void) -{ - int i; - - for (i = 0; i < ATMEL_MAX_UART; i++) { - if (at91_uarts[i]) - platform_device_register(at91_uarts[i]); - } - - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} - -#else -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_set_serial_console(unsigned portnr) {} -void __init at91_add_device_serial(void) {} -#endif - - -/* -------------------------------------------------------------------- - * mAgic - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_MAGICV -static struct resource mAgic_resources[] = { - { - .start = AT91_MAGIC_PM_BASE, - .end = AT91_MAGIC_PM_BASE + AT91_MAGIC_PM_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_DM_I_BASE, - .end = AT91_MAGIC_DM_I_BASE + AT91_MAGIC_DM_I_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_DM_F_BASE, - .end = AT91_MAGIC_DM_F_BASE + AT91_MAGIC_DM_F_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_DM_DB_BASE, - .end = AT91_MAGIC_DM_DB_BASE + AT91_MAGIC_DM_DB_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_REGS_BASE, - .end = AT91_MAGIC_REGS_BASE + AT91_MAGIC_REGS_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_EXTPAGE_BASE, - .end = AT91_MAGIC_EXTPAGE_BASE + AT91_MAGIC_EXTPAGE_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT572D940HF_ID_MSIRQ0, - .end = AT572D940HF_ID_MSIRQ0, - .flags = IORESOURCE_IRQ, - }, - { - .start = AT572D940HF_ID_MHALT, - .end = AT572D940HF_ID_MHALT, - .flags = IORESOURCE_IRQ, - }, - { - .start = AT572D940HF_ID_MEXC, - .end = AT572D940HF_ID_MEXC, - .flags = IORESOURCE_IRQ, - }, - { - .start = AT572D940HF_ID_MEDMA, - .end = AT572D940HF_ID_MEDMA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mAgic_device = { - .name = "mAgic", - .id = -1, - .num_resources = ARRAY_SIZE(mAgic_resources), - .resource = mAgic_resources, -}; - -void __init at91_add_device_mAgic(void) -{ - platform_device_register(&mAgic_device); -} -#else -void __init at91_add_device_mAgic(void) {} -#endif - - -/* -------------------------------------------------------------------- */ - -/* - * These devices are always present and don't need any board-specific - * setup. - */ -static int __init at91_add_standard_devices(void) -{ - at91_add_device_rtt(); - at91_add_device_watchdog(); - at91_add_device_tc(); - return 0; -} - -arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index 73376170fb9..17fae4a42ab 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -222,6 +222,25 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq1 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -258,12 +277,29 @@ static void __init at91cap9_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); clk_register(&pck3); } +static struct clk_lookup console_clock_lookup; + +void __init at91cap9_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -303,11 +339,14 @@ static void at91cap9_poweroff(void) * AT91CAP9 processor initialization * -------------------------------------------------------------------- */ -void __init at91cap9_initialize(unsigned long main_clock) +void __init at91cap9_map_io(void) { /* Map peripherals */ iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc)); +} +void __init at91cap9_initialize(unsigned long main_clock) +{ at91_arch_reset = at91cap9_reset; pm_power_off = at91cap9_poweroff; at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index 21020ceb2f3..cd850ed6f33 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -181,10 +181,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data) /* Pullup pin is handled internally by USB device peripheral */ - /* Clocks */ - at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk"); - at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk"); - platform_device_register(&at91_usba_udc_device); } #else @@ -355,7 +351,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc0_data = *data; - at91_clock_associate("mci0_clk", &at91cap9_mmc0_device.dev, "mci_clk"); platform_device_register(&at91cap9_mmc0_device); } else { /* MCI1 */ /* CLK */ @@ -373,7 +368,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc1_data = *data; - at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk"); platform_device_register(&at91cap9_mmc1_device); } } @@ -614,7 +608,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk"); platform_device_register(&at91cap9_spi0_device); } if (enable_spi1) { @@ -622,7 +615,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk"); platform_device_register(&at91cap9_spi1_device); } } @@ -659,8 +651,6 @@ static struct platform_device at91cap9_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has one clock and irq for all three TC channels */ - at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk"); platform_device_register(&at91cap9_tcb_device); } #else @@ -1001,12 +991,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91CAP9_ID_SSC0: pdev = &at91cap9_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "ssc"); break; case AT91CAP9_ID_SSC1: pdev = &at91cap9_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "ssc"); break; default: return; @@ -1199,32 +1187,30 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91cap9_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91CAP9_ID_US0: pdev = &at91cap9_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91CAP9_ID_US1: pdev = &at91cap9_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91CAP9_ID_US2: pdev = &at91cap9_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1232,8 +1218,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91cap9_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 2e9ecad97f3..b228ce9e21a 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -18,6 +18,7 @@ #include <mach/at91rm9200.h> #include <mach/at91_pmc.h> #include <mach/at91_st.h> +#include <mach/cpu.h> #include "generic.h" #include "clock.h" @@ -191,6 +192,26 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq6 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -227,12 +248,29 @@ static void __init at91rm9200_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); clk_register(&pck3); } +static struct clk_lookup console_clock_lookup; + +void __init at91rm9200_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -266,15 +304,25 @@ static void at91rm9200_reset(void) at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); } +int rm9200_type; +EXPORT_SYMBOL(rm9200_type); + +void __init at91rm9200_set_type(int type) +{ + rm9200_type = type; +} /* -------------------------------------------------------------------- * AT91RM9200 processor initialization * -------------------------------------------------------------------- */ -void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks) +void __init at91rm9200_map_io(void) { /* Map peripherals */ iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); +} +void __init at91rm9200_initialize(unsigned long main_clock) +{ at91_arch_reset = at91rm9200_reset; at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3) @@ -288,7 +336,8 @@ void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks at91rm9200_register_clocks(); /* Initialize GPIO subsystem */ - at91_gpio_init(at91rm9200_gpio, banks); + at91_gpio_init(at91rm9200_gpio, + cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP); } diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 7b539228e0e..a0ba475be04 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -644,15 +644,7 @@ static struct platform_device at91rm9200_tcb1_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk"); platform_device_register(&at91rm9200_tcb0_device); - - at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk"); - at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk"); - at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk"); platform_device_register(&at91rm9200_tcb1_device); } #else @@ -849,17 +841,14 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91RM9200_ID_SSC0: pdev = &at91rm9200_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "ssc"); break; case AT91RM9200_ID_SSC1: pdev = &at91rm9200_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "ssc"); break; case AT91RM9200_ID_SSC2: pdev = &at91rm9200_ssc2_device; configure_ssc2_pins(pins); - at91_clock_associate("ssc2_clk", &pdev->dev, "ssc"); break; default: return; @@ -1109,37 +1098,34 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91rm9200_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91RM9200_ID_US0: pdev = &at91rm9200_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91RM9200_ID_US1: pdev = &at91rm9200_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91RM9200_ID_US2: pdev = &at91rm9200_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91RM9200_ID_US3: pdev = &at91rm9200_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1147,8 +1133,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91rm9200_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 195208b3002..7d606b04d31 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -231,6 +231,28 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq2 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), + CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk), + CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk), + CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.5", &usart4_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.6", &usart5_clk), +}; + /* * The two programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -255,10 +277,27 @@ static void __init at91sam9260_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9260_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -289,7 +328,7 @@ static void at91sam9260_poweroff(void) * AT91SAM9260 processor initialization * -------------------------------------------------------------------- */ -static void __init at91sam9xe_initialize(void) +static void __init at91sam9xe_map_io(void) { unsigned long cidr, sram_size; @@ -310,18 +349,21 @@ static void __init at91sam9xe_initialize(void) iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc)); } -void __init at91sam9260_initialize(unsigned long main_clock) +void __init at91sam9260_map_io(void) { /* Map peripherals */ iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc)); if (cpu_is_at91sam9xe()) - at91sam9xe_initialize(); + at91sam9xe_map_io(); else if (cpu_is_at91sam9g20()) iotable_init(at91sam9g20_sram_desc, ARRAY_SIZE(at91sam9g20_sram_desc)); else iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc)); +} +void __init at91sam9260_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9260_poweroff; at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 07eb7b07e44..1fdeb9058a7 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -609,7 +609,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9260_spi0_device); } if (enable_spi1) { @@ -617,7 +616,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9260_spi1_device); } } @@ -694,15 +692,7 @@ static struct platform_device at91sam9260_tcb1_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91sam9260_tcb0_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91sam9260_tcb0_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91sam9260_tcb0_device.dev, "t2_clk"); platform_device_register(&at91sam9260_tcb0_device); - - at91_clock_associate("tc3_clk", &at91sam9260_tcb1_device.dev, "t0_clk"); - at91_clock_associate("tc4_clk", &at91sam9260_tcb1_device.dev, "t1_clk"); - at91_clock_associate("tc5_clk", &at91sam9260_tcb1_device.dev, "t2_clk"); platform_device_register(&at91sam9260_tcb1_device); } #else @@ -820,7 +810,6 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9260_ID_SSC: pdev = &at91sam9260_ssc_device; configure_ssc_pins(pins); - at91_clock_associate("ssc_clk", &pdev->dev, "pclk"); break; default: return; @@ -1139,47 +1128,42 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91sam9260_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US0: pdev = &at91sam9260_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US1: pdev = &at91sam9260_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US2: pdev = &at91sam9260_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US3: pdev = &at91sam9260_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US4: pdev = &at91sam9260_uart4_device; configure_usart4_pins(); - at91_clock_associate("usart4_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US5: pdev = &at91sam9260_uart5_device; configure_usart5_pins(); - at91_clock_associate("usart5_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1187,8 +1171,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9260_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index fcad8866850..c1483168c97 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -178,6 +178,24 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq2 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -228,6 +246,11 @@ static void __init at91sam9261_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); @@ -237,6 +260,18 @@ static void __init at91sam9261_register_clocks(void) clk_register(&hck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9261_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -267,7 +302,7 @@ static void at91sam9261_poweroff(void) * AT91SAM9261 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9261_initialize(unsigned long main_clock) +void __init at91sam9261_map_io(void) { /* Map peripherals */ iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc)); @@ -276,8 +311,10 @@ void __init at91sam9261_initialize(unsigned long main_clock) iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc)); else iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc)); +} - +void __init at91sam9261_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9261_poweroff; at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 59fc48311fb..3eb4538fcee 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -426,7 +426,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9261_spi0_device); } if (enable_spi1) { @@ -434,7 +433,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB31, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB29, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9261_spi1_device); } } @@ -581,10 +579,6 @@ static struct platform_device at91sam9261_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91sam9261_tcb_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91sam9261_tcb_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91sam9261_tcb_device.dev, "t2_clk"); platform_device_register(&at91sam9261_tcb_device); } #else @@ -786,17 +780,14 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9261_ID_SSC0: pdev = &at91sam9261_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9261_ID_SSC1: pdev = &at91sam9261_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; case AT91SAM9261_ID_SSC2: pdev = &at91sam9261_ssc2_device; configure_ssc2_pins(pins); - at91_clock_associate("ssc2_clk", &pdev->dev, "pclk"); break; default: return; @@ -989,32 +980,30 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91sam9261_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9261_ID_US0: pdev = &at91sam9261_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9261_ID_US1: pdev = &at91sam9261_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9261_ID_US2: pdev = &at91sam9261_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1022,8 +1011,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9261_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 249f900954d..dc28477d14f 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -199,6 +199,23 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq1 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -235,12 +252,29 @@ static void __init at91sam9263_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); clk_register(&pck3); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9263_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -279,11 +313,14 @@ static void at91sam9263_poweroff(void) * AT91SAM9263 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9263_initialize(unsigned long main_clock) +void __init at91sam9263_map_io(void) { /* Map peripherals */ iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc)); +} +void __init at91sam9263_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9263_poweroff; at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1); diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index fb5c23af101..ffe081b77ed 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -308,7 +308,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc0_data = *data; - at91_clock_associate("mci0_clk", &at91sam9263_mmc0_device.dev, "mci_clk"); platform_device_register(&at91sam9263_mmc0_device); } else { /* MCI1 */ /* CLK */ @@ -339,7 +338,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc1_data = *data; - at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk"); platform_device_register(&at91sam9263_mmc1_device); } } @@ -686,7 +684,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9263_spi0_device); } if (enable_spi1) { @@ -694,7 +691,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9263_spi1_device); } } @@ -941,8 +937,6 @@ static struct platform_device at91sam9263_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has one clock and irq for all three TC channels */ - at91_clock_associate("tcb_clk", &at91sam9263_tcb_device.dev, "t0_clk"); platform_device_register(&at91sam9263_tcb_device); } #else @@ -1171,12 +1165,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9263_ID_SSC0: pdev = &at91sam9263_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9263_ID_SSC1: pdev = &at91sam9263_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; default: return; @@ -1370,32 +1362,30 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91sam9263_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9263_ID_US0: pdev = &at91sam9263_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9263_ID_US1: pdev = &at91sam9263_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9263_ID_US2: pdev = &at91sam9263_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1403,8 +1393,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9263_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index c67b47f1c0f..2bb6ff9af1c 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -184,22 +184,6 @@ static struct clk vdec_clk = { .type = CLK_TYPE_PERIPHERAL, }; -/* One additional fake clock for ohci */ -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 0, - .type = CLK_TYPE_PERIPHERAL, - .parent = &uhphs_clk, -}; - -/* One additional fake clock for second TC block */ -static struct clk tcb1_clk = { - .name = "tcb1_clk", - .pmc_mask = 0, - .type = CLK_TYPE_PERIPHERAL, - .parent = &tcb0_clk, -}; - static struct clk *periph_clocks[] __initdata = { &pioA_clk, &pioB_clk, @@ -228,8 +212,30 @@ static struct clk *periph_clocks[] __initdata = { &udphs_clk, &mmc1_clk, // irq0 - &ohci_clk, - &tcb1_clk, +}; + +static struct clk_lookup periph_clocks_lookups[] = { + /* One additional fake clock for ohci */ + CLKDEV_CON_ID("ohci_clk", &uhphs_clk), + CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci.0", &uhphs_clk), + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), }; /* @@ -256,6 +262,11 @@ static void __init at91sam9g45_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11()) clk_register(&vdec_clk); @@ -263,6 +274,18 @@ static void __init at91sam9g45_register_clocks(void) clk_register(&pck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9g45_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -306,11 +329,14 @@ static void at91sam9g45_poweroff(void) * AT91SAM9G45 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9g45_initialize(unsigned long main_clock) +void __init at91sam9g45_map_io(void) { /* Map peripherals */ iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc)); +} +void __init at91sam9g45_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9g45_reset; pm_power_off = at91sam9g45_poweroff; at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0); diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 5e9f8a4c38d..05674865bc2 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -180,7 +180,6 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) } usbh_ehci_data = *data; - at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk"); platform_device_register(&at91_usbh_ehci_device); } #else @@ -266,10 +265,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data) /* Pullup pin is handled internally by USB device peripheral */ - /* Clocks */ - at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk"); - at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk"); - platform_device_register(&at91_usba_udc_device); } #else @@ -478,7 +473,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) } mmc0_data = *data; - at91_clock_associate("mci0_clk", &at91sam9g45_mmc0_device.dev, "mci_clk"); platform_device_register(&at91sam9g45_mmc0_device); } else { /* MCI1 */ @@ -504,7 +498,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) } mmc1_data = *data; - at91_clock_associate("mci1_clk", &at91sam9g45_mmc1_device.dev, "mci_clk"); platform_device_register(&at91sam9g45_mmc1_device); } @@ -801,7 +794,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI0_MOSI */ at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9g45_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9g45_spi0_device); } if (enable_spi1) { @@ -809,7 +801,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB15, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB16, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9g45_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9g45_spi1_device); } } @@ -999,10 +990,7 @@ static struct platform_device at91sam9g45_tcb1_device = { static void __init at91_add_device_tc(void) { - /* this chip has one clock and irq for all six TC channels */ - at91_clock_associate("tcb0_clk", &at91sam9g45_tcb0_device.dev, "t0_clk"); platform_device_register(&at91sam9g45_tcb0_device); - at91_clock_associate("tcb1_clk", &at91sam9g45_tcb1_device.dev, "t0_clk"); platform_device_register(&at91sam9g45_tcb1_device); } #else @@ -1286,12 +1274,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9G45_ID_SSC0: pdev = &at91sam9g45_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9G45_ID_SSC1: pdev = &at91sam9g45_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; default: return; @@ -1527,37 +1513,34 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91sam9g45_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US0: pdev = &at91sam9g45_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US1: pdev = &at91sam9g45_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US2: pdev = &at91sam9g45_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US3: pdev = &at91sam9g45_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1565,8 +1548,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9g45_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 6a9d24e5ed8..1a40f16b66c 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -190,6 +190,24 @@ static struct clk *periph_clocks[] __initdata = { // irq0 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), +}; + /* * The two programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -214,10 +232,27 @@ static void __init at91sam9rl_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9rl_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -252,7 +287,7 @@ static void at91sam9rl_poweroff(void) * AT91SAM9RL processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9rl_initialize(unsigned long main_clock) +void __init at91sam9rl_map_io(void) { unsigned long cidr, sram_size; @@ -275,7 +310,10 @@ void __init at91sam9rl_initialize(unsigned long main_clock) /* Map SRAM */ iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc)); +} +void __init at91sam9rl_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9rl_poweroff; at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index c49262bddd8..c296045f2b6 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -155,10 +155,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data) /* Pullup pin is handled internally by USB device peripheral */ - /* Clocks */ - at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk"); - at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk"); - platform_device_register(&at91_usba_udc_device); } #else @@ -605,10 +601,6 @@ static struct platform_device at91sam9rl_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91sam9rl_tcb_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91sam9rl_tcb_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91sam9rl_tcb_device.dev, "t2_clk"); platform_device_register(&at91sam9rl_tcb_device); } #else @@ -892,12 +884,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9RL_ID_SSC0: pdev = &at91sam9rl_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9RL_ID_SSC1: pdev = &at91sam9rl_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; default: return; @@ -1141,37 +1131,34 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91sam9rl_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US0: pdev = &at91sam9rl_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US1: pdev = &at91sam9rl_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US2: pdev = &at91sam9rl_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US3: pdev = &at91sam9rl_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1179,8 +1166,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9rl_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index ad3ec85b279..56ba3bd035a 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -37,11 +37,6 @@ unsigned long clk_get_rate(struct clk *clk) return AT91X40_MASTER_CLOCK; } -struct clk *clk_get(struct device *dev, const char *id) -{ - return NULL; -} - void __init at91x40_initialize(unsigned long main_clock) { at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1) diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 8a3fc84847c..ab1d463aa47 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -35,14 +35,18 @@ #include <mach/board.h> #include <mach/gpio.h> +#include <mach/cpu.h> #include "generic.h" -static void __init onearm_map_io(void) +static void __init onearm_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -92,9 +96,9 @@ static void __init onearm_board_init(void) MACHINE_START(ONEARM, "Ajeco 1ARM single board computer") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = onearm_map_io, + .map_io = at91rm9200_map_io, + .init_early = onearm_init_early, .init_irq = onearm_init_irq, .init_machine = onearm_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index cba7f7771fe..a4924de48c3 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -48,7 +48,7 @@ #include "generic.h" -static void __init afeb9260_map_io(void) +static void __init afeb9260_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -218,9 +218,9 @@ static void __init afeb9260_board_init(void) MACHINE_START(AFEB9260, "Custom afeb9260 board") /* Maintainer: Sergey Lapin <slapin@ossfans.org> */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = afeb9260_map_io, + .map_io = at91sam9260_map_io, + .init_early = afeb9260_init_early, .init_irq = afeb9260_init_irq, .init_machine = afeb9260_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c deleted file mode 100644 index 3929f1c9e4e..00000000000 --- a/arch/arm/mach-at91/board-at572d940hf_ek.c +++ /dev/null @@ -1,326 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-at572d940hf_ek.c - * - * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com> - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/ds1305.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/board.h> -#include <mach/gpio.h> -#include <mach/at91sam9_smc.h> - -#include "sam9_smc.h" -#include "generic.h" - - -static void __init eb_map_io(void) -{ - /* Initialize processor: 12.500 MHz crystal */ - at572d940hf_initialize(12000000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx & Tx only) */ - at91_register_uart(AT572D940HF_ID_US0, 1, 0); - - /* USART1 on ttyS2. (Rx & Tx only) */ - at91_register_uart(AT572D940HF_ID_US1, 2, 0); - - /* USART2 on ttyS3. (Tx & Rx only */ - at91_register_uart(AT572D940HF_ID_US2, 3, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} - -static void __init eb_init_irq(void) -{ - at572d940hf_init_interrupts(NULL); -} - - -/* - * USB Host Port - */ -static struct at91_usbh_data __initdata eb_usbh_data = { - .ports = 2, -}; - - -/* - * USB Device Port - */ -static struct at91_udc_data __initdata eb_udc_data = { - .vbus_pin = 0, /* no VBUS detection,UDC always on */ - .pullup_pin = 0, /* pull-up driven by UDC */ -}; - - -/* - * MCI (SD/MMC) - */ -static struct at91_mmc_data __initdata eb_mmc_data = { - .wire4 = 1, -/* .det_pin = ... not connected */ -/* .wp_pin = ... not connected */ -/* .vcc_pin = ... not connected */ -}; - - -/* - * MACB Ethernet device - */ -static struct at91_eth_data __initdata eb_eth_data = { - .phy_irq_pin = AT91_PIN_PB25, - .is_rmii = 1, -}; - -/* - * NOR flash - */ - -static struct mtd_partition eb_nor_partitions[] = { - { - .name = "Raw Environment", - .offset = 0, - .size = SZ_4M, - .mask_flags = 0, - }, - { - .name = "OS FS", - .offset = MTDPART_OFS_APPEND, - .size = 3 * SZ_1M, - .mask_flags = 0, - }, - { - .name = "APP FS", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - }, -}; - -static void nor_flash_set_vpp(struct map_info* mi, int i) { -}; - -static struct physmap_flash_data nor_flash_data = { - .width = 4, - .parts = eb_nor_partitions, - .nr_parts = ARRAY_SIZE(eb_nor_partitions), - .set_vpp = nor_flash_set_vpp, -}; - -static struct resource nor_flash_resources[] = { - { - .start = AT91_CHIPSELECT_0, - .end = AT91_CHIPSELECT_0 + SZ_16M - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &nor_flash_data, - }, - .resource = nor_flash_resources, - .num_resources = ARRAY_SIZE(nor_flash_resources), -}; - -static struct sam9_smc_config __initdata eb_nor_smc_config = { - .ncs_read_setup = 1, - .nrd_setup = 1, - .ncs_write_setup = 1, - .nwe_setup = 1, - - .ncs_read_pulse = 7, - .nrd_pulse = 7, - .ncs_write_pulse = 7, - .nwe_pulse = 7, - - .read_cycle = 9, - .write_cycle = 9, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_32, - .tdf_cycles = 1, -}; - -static void __init eb_add_device_nor(void) -{ - /* configure chip-select 0 (NOR) */ - sam9_smc_configure(0, &eb_nor_smc_config); - platform_device_register(&nor_flash); -} - -/* - * NAND flash - */ -static struct mtd_partition __initdata eb_nand_partition[] = { - { - .name = "Partition 1", - .offset = 0, - .size = SZ_16M, - }, - { - .name = "Partition 2", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(eb_nand_partition); - return eb_nand_partition; -} - -static struct atmel_nand_data __initdata eb_nand_data = { - .ale = 22, - .cle = 21, -/* .det_pin = ... not connected */ -/* .rdy_pin = AT91_PIN_PC16, */ - .enable_pin = AT91_PIN_PA15, - .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif -}; - -static struct sam9_smc_config __initdata eb_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 0, - .ncs_write_setup = 1, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 12, -}; - -static void __init eb_add_device_nand(void) -{ - /* setup bus-width (8 or 16) */ - if (eb_nand_data.bus_width_16) - eb_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - eb_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &eb_nand_smc_config); - - at91_add_device_nand(&eb_nand_data); -} - - -/* - * SPI devices - */ -static struct resource rtc_resources[] = { - [0] = { - .start = AT572D940HF_ID_IRQ1, - .end = AT572D940HF_ID_IRQ1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct ds1305_platform_data ds1306_data = { - .is_ds1306 = true, - .en_1hz = false, -}; - -static struct spi_board_info eb_spi_devices[] = { - { /* RTC Dallas DS1306 */ - .modalias = "rtc-ds1305", - .chip_select = 3, - .mode = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA, - .max_speed_hz = 500000, - .bus_num = 0, - .irq = AT572D940HF_ID_IRQ1, - .platform_data = (void *) &ds1306_data, - }, -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* Dataflash card */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -}; - -static void __init eb_board_init(void) -{ - /* Serial */ - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&eb_usbh_data); - /* USB Device */ - at91_add_device_udc(&eb_udc_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* NOR */ - eb_add_device_nor(); - /* NAND */ - eb_add_device_nand(); - /* SPI */ - at91_add_device_spi(eb_spi_devices, ARRAY_SIZE(eb_spi_devices)); - /* MMC */ - at91_add_device_mmc(0, &eb_mmc_data); - /* Ethernet */ - at91_add_device_eth(&eb_eth_data); - /* mAgic */ - at91_add_device_mAgic(); -} - -MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB") - /* Maintainer: Atmel <costa.antonior@gmail.com> */ - .boot_params = AT91_SDRAM_BASE + 0x100, - .timer = &at91sam926x_timer, - .map_io = eb_map_io, - .init_irq = eb_init_irq, - .init_machine = eb_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index b54e3e6fceb..148fccb9a25 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -45,7 +45,7 @@ #include "generic.h" -static void __init cam60_map_io(void) +static void __init cam60_init_early(void) { /* Initialize processor: 10 MHz crystal */ at91sam9260_initialize(10000000); @@ -198,9 +198,9 @@ static void __init cam60_board_init(void) MACHINE_START(CAM60, "KwikByte CAM60") /* Maintainer: KwikByte */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = cam60_map_io, + .map_io = at91sam9260_map_io, + .init_early = cam60_init_early, .init_irq = cam60_init_irq, .init_machine = cam60_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index e7274440ead..1904fdf8761 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -44,12 +44,13 @@ #include <mach/gpio.h> #include <mach/at91cap9_matrix.h> #include <mach/at91sam9_smc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" -static void __init cap9adk_map_io(void) +static void __init cap9adk_init_early(void) { /* Initialize processor: 12 MHz crystal */ at91cap9_initialize(12000000); @@ -187,11 +188,6 @@ static struct atmel_nand_data __initdata cap9adk_nand_data = { // .rdy_pin = ... not connected .enable_pin = AT91_PIN_PD15, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata cap9adk_nand_smc_config = { @@ -219,6 +215,7 @@ static void __init cap9adk_add_device_nand(void) csa = at91_sys_read(AT91_MATRIX_EBICSA); at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); + cap9adk_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (cap9adk_nand_data.bus_width_16) cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -399,9 +396,9 @@ static void __init cap9adk_board_init(void) MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK") /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = cap9adk_map_io, + .map_io = at91cap9_map_io, + .init_early = cap9adk_init_early, .init_irq = cap9adk_init_irq, .init_machine = cap9adk_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 295e1e77fa6..f36b1868749 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -40,10 +40,10 @@ #include "generic.h" -static void __init carmeva_map_io(void) +static void __init carmeva_init_early(void) { /* Initialize processor: 20.000 MHz crystal */ - at91rm9200_initialize(20000000, AT91RM9200_BGA); + at91rm9200_initialize(20000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -162,9 +162,9 @@ static void __init carmeva_board_init(void) MACHINE_START(CARMEVA, "Carmeva") /* Maintainer: Conitec Datasystems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = carmeva_map_io, + .map_io = at91rm9200_map_io, + .init_early = carmeva_init_early, .init_irq = carmeva_init_irq, .init_machine = carmeva_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 3838594578f..980511084fe 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -47,7 +47,7 @@ #include "sam9_smc.h" #include "generic.h" -static void __init cpu9krea_map_io(void) +static void __init cpu9krea_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -375,9 +375,9 @@ MACHINE_START(CPUAT9260, "Eukrea CPU9260") MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") #endif /* Maintainer: Eric Benard - EUKREA Electromatique */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = cpu9krea_map_io, + .map_io = at91sam9260_map_io, + .init_early = cpu9krea_init_early, .init_irq = cpu9krea_init_irq, .init_machine = cpu9krea_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 2f4dd8cdd48..6daabe3907a 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -38,6 +38,7 @@ #include <mach/board.h> #include <mach/gpio.h> #include <mach/at91rm9200_mc.h> +#include <mach/cpu.h> #include "generic.h" @@ -50,10 +51,13 @@ static struct gpio_led cpuat91_leds[] = { }, }; -static void __init cpuat91_map_io(void) +static void __init cpuat91_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -175,9 +179,9 @@ static void __init cpuat91_board_init(void) MACHINE_START(CPUAT91, "Eukrea") /* Maintainer: Eric Benard - EUKREA Electromatique */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = cpuat91_map_io, + .map_io = at91rm9200_map_io, + .init_early = cpuat91_init_early, .init_irq = cpuat91_init_irq, .init_machine = cpuat91_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index 464839dc39b..d98bcec1dfe 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -43,10 +43,10 @@ #include "generic.h" -static void __init csb337_map_io(void) +static void __init csb337_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ - at91rm9200_initialize(3686400, AT91RM9200_BGA); + at91rm9200_initialize(3686400); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); @@ -257,9 +257,9 @@ static void __init csb337_board_init(void) MACHINE_START(CSB337, "Cogent CSB337") /* Maintainer: Bill Gatliff */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = csb337_map_io, + .map_io = at91rm9200_map_io, + .init_early = csb337_init_early, .init_irq = csb337_init_irq, .init_machine = csb337_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 431688c6141..019aab4e20b 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -40,10 +40,10 @@ #include "generic.h" -static void __init csb637_map_io(void) +static void __init csb637_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ - at91rm9200_initialize(3686400, AT91RM9200_BGA); + at91rm9200_initialize(3686400); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -138,9 +138,9 @@ static void __init csb637_board_init(void) MACHINE_START(CSB637, "Cogent CSB637") /* Maintainer: Bill Gatliff */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = csb637_map_io, + .map_io = at91rm9200_map_io, + .init_early = csb637_init_early, .init_irq = csb637_init_irq, .init_machine = csb637_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c index d8df59a3426..d2023f27c65 100644 --- a/arch/arm/mach-at91/board-eb01.c +++ b/arch/arm/mach-at91/board-eb01.c @@ -35,7 +35,7 @@ static void __init at91eb01_init_irq(void) at91x40_init_interrupts(NULL); } -static void __init at91eb01_map_io(void) +static void __init at91eb01_init_early(void) { at91x40_initialize(40000000); } @@ -43,7 +43,7 @@ static void __init at91eb01_map_io(void) MACHINE_START(AT91EB01, "Atmel AT91 EB01") /* Maintainer: Greg Ungerer <gerg@snapgear.com> */ .timer = &at91x40_timer, + .init_early = at91eb01_init_early, .init_irq = at91eb01_init_irq, - .map_io = at91eb01_map_io, MACHINE_END diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index 6cf6566ae34..e9484535cbc 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -40,10 +40,10 @@ #include "generic.h" -static void __init eb9200_map_io(void) +static void __init eb9200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -120,9 +120,9 @@ static void __init eb9200_board_init(void) } MACHINE_START(ATEB9200, "Embest ATEB9200") - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = eb9200_map_io, + .map_io = at91rm9200_map_io, + .init_early = eb9200_init_early, .init_irq = eb9200_init_irq, .init_machine = eb9200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index de2fd04e7c8..a6f57faa10a 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -38,14 +38,18 @@ #include <mach/board.h> #include <mach/gpio.h> +#include <mach/cpu.h> #include "generic.h" -static void __init ecb_at91map_io(void) +static void __init ecb_at91init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7); @@ -168,9 +172,9 @@ static void __init ecb_at91board_init(void) MACHINE_START(ECBAT91, "emQbit's ECB_AT91") /* Maintainer: emQbit.com */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = ecb_at91map_io, + .map_io = at91rm9200_map_io, + .init_early = ecb_at91init_early, .init_irq = ecb_at91init_irq, .init_machine = ecb_at91board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index a158a0ce458..bfc0062d148 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -26,11 +26,16 @@ #include <mach/board.h> #include <mach/at91rm9200_mc.h> +#include <mach/cpu.h> + #include "generic.h" -static void __init eco920_map_io(void) +static void __init eco920_init_early(void) { - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); @@ -86,21 +91,6 @@ static struct platform_device eco920_flash = { .num_resources = 1, }; -static struct resource at91_beeper_resources[] = { - [0] = { - .start = AT91RM9200_BASE_TC3, - .end = AT91RM9200_BASE_TC3 + 0x39, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device at91_beeper = { - .name = "at91_beeper", - .id = 0, - .resource = at91_beeper_resources, - .num_resources = ARRAY_SIZE(at91_beeper_resources), -}; - static struct spi_board_info eco920_spi_devices[] = { { /* CAN controller */ .modalias = "tlv5638", @@ -139,18 +129,14 @@ static void __init eco920_board_init(void) AT91_SMC_TDF_(1) /* float time */ ); - at91_clock_associate("tc3_clk", &at91_beeper.dev, "at91_beeper"); - at91_set_B_periph(AT91_PIN_PB6, 0); - platform_device_register(&at91_beeper); - at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices)); } MACHINE_START(ECO920, "eco920") /* Maintainer: Sascha Hauer */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = eco920_map_io, + .map_io = at91rm9200_map_io, + .init_early = eco920_init_early, .init_irq = eco920_init_irq, .init_machine = eco920_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index c8a62dc8fa6..466c063b8d2 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -37,7 +37,7 @@ #include "generic.h" -static void __init flexibity_map_io(void) +static void __init flexibity_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -154,9 +154,9 @@ static void __init flexibity_board_init(void) MACHINE_START(FLEXIBITY, "Flexibity Connect") /* Maintainer: Maxim Osipov */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = flexibity_map_io, + .map_io = at91sam9260_map_io, + .init_early = flexibity_init_early, .init_irq = flexibity_init_irq, .init_machine = flexibity_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index dfc7dfe738e..e2d1dc9eff4 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -57,7 +57,7 @@ */ -static void __init foxg20_map_io(void) +static void __init foxg20_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -266,9 +266,9 @@ static void __init foxg20_board_init(void) MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20") /* Maintainer: Sergio Tanzilli */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = foxg20_map_io, + .map_io = at91sam9260_map_io, + .init_early = foxg20_init_early, .init_irq = foxg20_init_irq, .init_machine = foxg20_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index bc28136ee24..1d4f36b3cb2 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -38,9 +38,9 @@ #include "sam9_smc.h" #include "generic.h" -static void __init gsia18s_map_io(void) +static void __init gsia18s_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI). @@ -576,9 +576,9 @@ static void __init gsia18s_board_init(void) } MACHINE_START(GSIA18S, "GS_IA18_S") - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = gsia18s_map_io, + .map_io = at91sam9260_map_io, + .init_early = gsia18s_init_early, .init_irq = init_irq, .init_machine = gsia18s_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index d2e1f4ec1fc..9b003ff744b 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -35,14 +35,18 @@ #include <mach/board.h> #include <mach/gpio.h> +#include <mach/cpu.h> #include "generic.h" -static void __init kafa_map_io(void) +static void __init kafa_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); @@ -94,9 +98,9 @@ static void __init kafa_board_init(void) MACHINE_START(KAFA, "Sperry-Sun KAFA") /* Maintainer: Sergei Sharonov */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = kafa_map_io, + .map_io = at91rm9200_map_io, + .init_early = kafa_init_early, .init_irq = kafa_init_irq, .init_machine = kafa_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index a13d2063faf..a813a74b65f 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -36,16 +36,19 @@ #include <mach/board.h> #include <mach/gpio.h> - +#include <mach/cpu.h> #include <mach/at91rm9200_mc.h> #include "generic.h" -static void __init kb9202_map_io(void) +static void __init kb9202_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 10 MHz crystal */ - at91rm9200_initialize(10000000, AT91RM9200_PQFP); + at91rm9200_initialize(10000000); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); @@ -136,9 +139,9 @@ static void __init kb9202_board_init(void) MACHINE_START(KB9200, "KB920x") /* Maintainer: KwikByte, Inc. */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = kb9202_map_io, + .map_io = at91rm9200_map_io, + .init_early = kb9202_init_early, .init_irq = kb9202_init_irq, .init_machine = kb9202_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index fe5f1d47e6e..961e805db68 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -51,7 +51,7 @@ #include "generic.h" -static void __init neocore926_map_io(void) +static void __init neocore926_init_early(void) { /* Initialize processor: 20 MHz crystal */ at91sam9263_initialize(20000000); @@ -387,9 +387,9 @@ static void __init neocore926_board_init(void) MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926") /* Maintainer: ADENEO */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = neocore926_map_io, + .map_io = at91sam9263_map_io, + .init_early = neocore926_init_early, .init_irq = neocore926_init_irq, .init_machine = neocore926_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index feb65787c30..21a21af2587 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -37,9 +37,9 @@ #include "generic.h" -static void __init pcontrol_g20_map_io(void) +static void __init pcontrol_g20_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS @@ -222,9 +222,9 @@ static void __init pcontrol_g20_board_init(void) MACHINE_START(PCONTROL_G20, "PControl G20") /* Maintainer: pgsellmann@portner-elektronik.at */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = pcontrol_g20_map_io, + .map_io = at91sam9260_map_io, + .init_early = pcontrol_g20_init_early, .init_irq = init_irq, .init_machine = pcontrol_g20_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 55dad3a4654..756cc2a745d 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -43,10 +43,10 @@ #include "generic.h" -static void __init picotux200_map_io(void) +static void __init picotux200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -123,9 +123,9 @@ static void __init picotux200_board_init(void) MACHINE_START(PICOTUX2XX, "picotux 200") /* Maintainer: Kleinhenz Elektronik GmbH */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = picotux200_map_io, + .map_io = at91rm9200_map_io, + .init_early = picotux200_init_early, .init_irq = picotux200_init_irq, .init_machine = picotux200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 69d15a875b6..d1a6001b0bd 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -48,7 +48,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9260_initialize(12000000); @@ -268,9 +268,9 @@ static void __init ek_board_init(void) MACHINE_START(QIL_A9260, "CALAO QIL_A9260") /* Maintainer: calao-systems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 4c1047c8200..aef9627710b 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -45,10 +45,10 @@ #include "generic.h" -static void __init dk_map_io(void) +static void __init dk_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); @@ -227,9 +227,9 @@ static void __init dk_board_init(void) MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") /* Maintainer: SAN People/Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = dk_map_io, + .map_io = at91rm9200_map_io, + .init_early = dk_init_early, .init_irq = dk_init_irq, .init_machine = dk_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 9df1be8818c..015a0218308 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -45,10 +45,10 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); @@ -193,9 +193,9 @@ static void __init ek_board_init(void) MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") /* Maintainer: SAN People/Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = ek_map_io, + .map_io = at91rm9200_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 25a26beaa72..aaf1bf0989b 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -44,7 +44,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -212,9 +212,9 @@ static void __init ek_board_init(void) MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") /* Maintainer: Olimex */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index de1816e0e1d..d600dc12322 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -44,12 +44,13 @@ #include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -191,11 +192,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -218,6 +214,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -356,9 +353,9 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 14acc901e24..f897f84d43d 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -48,12 +48,13 @@ #include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9261_initialize(18432000); @@ -197,11 +198,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC15, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -224,6 +220,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -623,9 +620,9 @@ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") #endif /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9261_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index bfe490df58b..605b26f40a4 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -47,12 +47,13 @@ #include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 16.367 MHz crystal */ at91sam9263_initialize(16367660); @@ -198,11 +199,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PA22, .enable_pin = AT91_PIN_PD15, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -225,6 +221,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -454,9 +451,9 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9263_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index ca8198b3c16..7624cf0d006 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -43,6 +43,7 @@ #include <mach/board.h> #include <mach/gpio.h> #include <mach/at91sam9_smc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" @@ -60,7 +61,7 @@ static int inline ek_have_2mmc(void) } -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -175,11 +176,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -202,6 +198,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -406,18 +403,18 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 6c999dbd2bc..063c95d0e8f 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -41,12 +41,13 @@ #include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9g45_initialize(12000000); @@ -155,11 +156,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC8, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -182,6 +178,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -424,9 +421,9 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9g45_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 3bf3408e94c..effb399a80a 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -38,7 +38,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9rl_initialize(12000000); @@ -329,9 +329,9 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9rl_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 17f7d9b3214..3eb0a1153cc 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -40,7 +40,7 @@ #define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x)) -static void __init snapper9260_map_io(void) +static void __init snapper9260_init_early(void) { at91sam9260_initialize(18432000); @@ -178,9 +178,9 @@ static void __init snapper9260_board_init(void) } MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = snapper9260_map_io, + .map_io = at91sam9260_map_io, + .init_early = snapper9260_init_early, .init_irq = snapper9260_init_irq, .init_machine = snapper9260_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index f8902b11896..5e5c85688f5 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -32,7 +32,7 @@ #include "generic.h" -void __init stamp9g20_map_io(void) +void __init stamp9g20_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -44,9 +44,9 @@ void __init stamp9g20_map_io(void) at91_set_serial_console(0); } -static void __init stamp9g20evb_map_io(void) +static void __init stamp9g20evb_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS @@ -54,9 +54,9 @@ static void __init stamp9g20evb_map_io(void) | ATMEL_UART_DCD | ATMEL_UART_RI); } -static void __init portuxg20_map_io(void) +static void __init portuxg20_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS @@ -298,18 +298,18 @@ static void __init stamp9g20evb_board_init(void) MACHINE_START(PORTUXG20, "taskit PortuxG20") /* Maintainer: taskit GmbH */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = portuxg20_map_io, + .map_io = at91sam9260_map_io, + .init_early = portuxg20_init_early, .init_irq = init_irq, .init_machine = portuxg20_board_init, MACHINE_END MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = stamp9g20evb_map_io, + .map_io = at91sam9260_map_io, + .init_early = stamp9g20evb_init_early, .init_irq = init_irq, .init_machine = stamp9g20evb_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c index 07784baeae8..0e784e6fede 100644 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ b/arch/arm/mach-at91/board-usb-a9260.c @@ -48,7 +48,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9260_initialize(12000000); @@ -228,9 +228,9 @@ static void __init ek_board_init(void) MACHINE_START(USB_A9260, "CALAO USB_A9260") /* Maintainer: calao-systems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c index b614508931f..cf626dd14b2 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a9263.c @@ -47,7 +47,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.00 MHz crystal */ at91sam9263_initialize(12000000); @@ -244,9 +244,9 @@ static void __init ek_board_init(void) MACHINE_START(USB_A9263, "CALAO USB_A9263") /* Maintainer: calao-systems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9263_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index e0f0080eb63..c208cc334d7 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -45,14 +45,18 @@ #include <mach/board.h> #include <mach/gpio.h> #include <mach/at91rm9200_mc.h> +#include <mach/cpu.h> #include "generic.h" -static void __init yl9200_map_io(void) +static void __init yl9200_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */ at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17); @@ -594,9 +598,9 @@ static void __init yl9200_board_init(void) MACHINE_START(YL9200, "uCdragon YL-9200") /* Maintainer: S.Birtles */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = yl9200_map_io, + .map_io = at91rm9200_map_io, + .init_early = yl9200_init_early, .init_irq = yl9200_init_irq, .init_machine = yl9200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 9113da6845f..61873f3aa92 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -163,7 +163,7 @@ static struct clk udpck = { .parent = &pllb, .mode = pmc_sys_mode, }; -static struct clk utmi_clk = { +struct clk utmi_clk = { .name = "utmi_clk", .parent = &main_clk, .pmc_mask = AT91_PMC_UPLLEN, /* in CKGR_UCKR */ @@ -182,7 +182,7 @@ static struct clk uhpck = { * memory, interfaces to on-chip peripherals, the AIC, and sometimes more * (e.g baud rate generation). It's sourced from one of the primary clocks. */ -static struct clk mck = { +struct clk mck = { .name = "mck", .pmc_mask = AT91_PMC_MCKRDY, /* in PMC_SR */ }; @@ -215,43 +215,6 @@ static struct clk __init *at91_css_to_clk(unsigned long css) return NULL; } -/* - * Associate a particular clock with a function (eg, "uart") and device. - * The drivers can then request the same 'function' with several different - * devices and not care about which clock name to use. - */ -void __init at91_clock_associate(const char *id, struct device *dev, const char *func) -{ - struct clk *clk = clk_get(NULL, id); - - if (!dev || !clk || !IS_ERR(clk_get(dev, func))) - return; - - clk->function = func; - clk->dev = dev; -} - -/* clocks cannot be de-registered no refcounting necessary */ -struct clk *clk_get(struct device *dev, const char *id) -{ - struct clk *clk; - - list_for_each_entry(clk, &clocks, node) { - if (strcmp(id, clk->name) == 0) - return clk; - if (clk->function && (dev == clk->dev) && strcmp(id, clk->function) == 0) - return clk; - } - - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - static void __clk_enable(struct clk *clk) { if (clk->parent) @@ -498,32 +461,38 @@ postcore_initcall(at91_clk_debugfs_init); /*------------------------------------------------------------------------*/ /* Register a new clock */ +static void __init at91_clk_add(struct clk *clk) +{ + list_add_tail(&clk->node, &clocks); + + clk->cl.con_id = clk->name; + clk->cl.clk = clk; + clkdev_add(&clk->cl); +} + int __init clk_register(struct clk *clk) { if (clk_is_peripheral(clk)) { if (!clk->parent) clk->parent = &mck; clk->mode = pmc_periph_mode; - list_add_tail(&clk->node, &clocks); } else if (clk_is_sys(clk)) { clk->parent = &mck; clk->mode = pmc_sys_mode; - - list_add_tail(&clk->node, &clocks); } #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS else if (clk_is_programmable(clk)) { clk->mode = pmc_sys_mode; init_programmable_clock(clk); - list_add_tail(&clk->node, &clocks); } #endif + at91_clk_add(clk); + return 0; } - /*------------------------------------------------------------------------*/ static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg) @@ -630,7 +599,7 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock) at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20() || - cpu_is_at91sam9g10() || cpu_is_at572d940hf()) { + cpu_is_at91sam9g10()) { uhpck.pmc_mask = AT91SAM926x_PMC_UHP; udpck.pmc_mask = AT91SAM926x_PMC_UDP; } else if (cpu_is_at91cap9()) { @@ -754,19 +723,19 @@ int __init at91_clock_init(unsigned long main_clock) /* Register the PMC's standard clocks */ for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++) - list_add_tail(&standard_pmc_clocks[i]->node, &clocks); + at91_clk_add(standard_pmc_clocks[i]); if (cpu_has_pllb()) - list_add_tail(&pllb.node, &clocks); + at91_clk_add(&pllb); if (cpu_has_uhp()) - list_add_tail(&uhpck.node, &clocks); + at91_clk_add(&uhpck); if (cpu_has_udpfs()) - list_add_tail(&udpck.node, &clocks); + at91_clk_add(&udpck); if (cpu_has_utmi()) - list_add_tail(&utmi_clk.node, &clocks); + at91_clk_add(&utmi_clk); /* MCK and CPU clock are "always on" */ clk_enable(&mck); diff --git a/arch/arm/mach-at91/clock.h b/arch/arm/mach-at91/clock.h index 6cf4b78e175..c2e63e47dcb 100644 --- a/arch/arm/mach-at91/clock.h +++ b/arch/arm/mach-at91/clock.h @@ -6,6 +6,8 @@ * published by the Free Software Foundation. */ +#include <linux/clkdev.h> + #define CLK_TYPE_PRIMARY 0x1 #define CLK_TYPE_PLL 0x2 #define CLK_TYPE_PROGRAMMABLE 0x4 @@ -16,8 +18,7 @@ struct clk { struct list_head node; const char *name; /* unique clock name */ - const char *function; /* function of the clock */ - struct device *dev; /* device associated with function */ + struct clk_lookup cl; unsigned long rate_hz; struct clk *parent; u32 pmc_mask; @@ -29,3 +30,18 @@ struct clk { extern int __init clk_register(struct clk *clk); +extern struct clk mck; +extern struct clk utmi_clk; + +#define CLKDEV_CON_ID(_id, _clk) \ + { \ + .con_id = _id, \ + .clk = _clk, \ + } + +#define CLKDEV_CON_DEV_ID(_con_id, _dev_id, _clk) \ + { \ + .con_id = _con_id, \ + .dev_id = _dev_id, \ + .clk = _clk, \ + } diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 0c66deb2db3..8ff3418f343 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -8,8 +8,21 @@ * published by the Free Software Foundation. */ +#include <linux/clkdev.h> + + /* Map io */ +extern void __init at91rm9200_map_io(void); +extern void __init at91sam9260_map_io(void); +extern void __init at91sam9261_map_io(void); +extern void __init at91sam9263_map_io(void); +extern void __init at91sam9rl_map_io(void); +extern void __init at91sam9g45_map_io(void); +extern void __init at91x40_map_io(void); +extern void __init at91cap9_map_io(void); + /* Processors */ -extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks); +extern void __init at91rm9200_set_type(int type); +extern void __init at91rm9200_initialize(unsigned long main_clock); extern void __init at91sam9260_initialize(unsigned long main_clock); extern void __init at91sam9261_initialize(unsigned long main_clock); extern void __init at91sam9263_initialize(unsigned long main_clock); @@ -17,7 +30,6 @@ extern void __init at91sam9rl_initialize(unsigned long main_clock); extern void __init at91sam9g45_initialize(unsigned long main_clock); extern void __init at91x40_initialize(unsigned long main_clock); extern void __init at91cap9_initialize(unsigned long main_clock); -extern void __init at572d940hf_initialize(unsigned long main_clock); /* Interrupts */ extern void __init at91rm9200_init_interrupts(unsigned int priority[]); @@ -28,7 +40,6 @@ extern void __init at91sam9rl_init_interrupts(unsigned int priority[]); extern void __init at91sam9g45_init_interrupts(unsigned int priority[]); extern void __init at91x40_init_interrupts(unsigned int priority[]); extern void __init at91cap9_init_interrupts(unsigned int priority[]); -extern void __init at572d940hf_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); /* Timer */ @@ -39,8 +50,19 @@ extern struct sys_timer at91x40_timer; /* Clocks */ extern int __init at91_clock_init(unsigned long main_clock); +/* + * function to specify the clock of the default console. As we do not + * use the device/driver bus, the dev_name is not intialize. So we need + * to link the clock to a specific con_id only "usart" + */ +extern void __init at91rm9200_set_console_clock(int id); +extern void __init at91sam9260_set_console_clock(int id); +extern void __init at91sam9261_set_console_clock(int id); +extern void __init at91sam9263_set_console_clock(int id); +extern void __init at91sam9rl_set_console_clock(int id); +extern void __init at91sam9g45_set_console_clock(int id); +extern void __init at91cap9_set_console_clock(int id); struct device; -extern void __init at91_clock_associate(const char *id, struct device *dev, const char *func); /* Power Management */ extern void at91_irq_suspend(void); diff --git a/arch/arm/mach-at91/include/mach/at572d940hf.h b/arch/arm/mach-at91/include/mach/at572d940hf.h deleted file mode 100644 index be510cfc56b..00000000000 --- a/arch/arm/mach-at91/include/mach/at572d940hf.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * include/mach/at572d940hf.h - * - * Antonio R. Costa <costa.antonior@gmail.com> - * Copyright (C) 2008 Atmel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef AT572D940HF_H -#define AT572D940HF_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ -#define AT572D940HF_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT572D940HF_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT572D940HF_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT572D940HF_ID_EMAC 5 /* MACB ethernet controller */ -#define AT572D940HF_ID_US0 6 /* USART 0 */ -#define AT572D940HF_ID_US1 7 /* USART 1 */ -#define AT572D940HF_ID_US2 8 /* USART 2 */ -#define AT572D940HF_ID_MCI 9 /* Multimedia Card Interface */ -#define AT572D940HF_ID_UDP 10 /* USB Device Port */ -#define AT572D940HF_ID_TWI0 11 /* Two-Wire Interface 0 */ -#define AT572D940HF_ID_SPI0 12 /* Serial Peripheral Interface 0 */ -#define AT572D940HF_ID_SPI1 13 /* Serial Peripheral Interface 1 */ -#define AT572D940HF_ID_SSC0 14 /* Serial Synchronous Controller 0 */ -#define AT572D940HF_ID_SSC1 15 /* Serial Synchronous Controller 1 */ -#define AT572D940HF_ID_SSC2 16 /* Serial Synchronous Controller 2 */ -#define AT572D940HF_ID_TC0 17 /* Timer Counter 0 */ -#define AT572D940HF_ID_TC1 18 /* Timer Counter 1 */ -#define AT572D940HF_ID_TC2 19 /* Timer Counter 2 */ -#define AT572D940HF_ID_UHP 20 /* USB Host port */ -#define AT572D940HF_ID_SSC3 21 /* Serial Synchronous Controller 3 */ -#define AT572D940HF_ID_TWI1 22 /* Two-Wire Interface 1 */ -#define AT572D940HF_ID_CAN0 23 /* CAN Controller 0 */ -#define AT572D940HF_ID_CAN1 24 /* CAN Controller 1 */ -#define AT572D940HF_ID_MHALT 25 /* mAgicV HALT line */ -#define AT572D940HF_ID_MSIRQ0 26 /* mAgicV SIRQ0 line */ -#define AT572D940HF_ID_MEXC 27 /* mAgicV exception line */ -#define AT572D940HF_ID_MEDMA 28 /* mAgicV end of DMA line */ -#define AT572D940HF_ID_IRQ0 29 /* External Interrupt Source (IRQ0) */ -#define AT572D940HF_ID_IRQ1 30 /* External Interrupt Source (IRQ1) */ -#define AT572D940HF_ID_IRQ2 31 /* External Interrupt Source (IRQ2) */ - - -/* - * User Peripheral physical base addresses. - */ -#define AT572D940HF_BASE_TCB 0xfffa0000 -#define AT572D940HF_BASE_TC0 0xfffa0000 -#define AT572D940HF_BASE_TC1 0xfffa0040 -#define AT572D940HF_BASE_TC2 0xfffa0080 -#define AT572D940HF_BASE_UDP 0xfffa4000 -#define AT572D940HF_BASE_MCI 0xfffa8000 -#define AT572D940HF_BASE_TWI0 0xfffac000 -#define AT572D940HF_BASE_US0 0xfffb0000 -#define AT572D940HF_BASE_US1 0xfffb4000 -#define AT572D940HF_BASE_US2 0xfffb8000 -#define AT572D940HF_BASE_SSC0 0xfffbc000 -#define AT572D940HF_BASE_SSC1 0xfffc0000 -#define AT572D940HF_BASE_SSC2 0xfffc4000 -#define AT572D940HF_BASE_SPI0 0xfffc8000 -#define AT572D940HF_BASE_SPI1 0xfffcc000 -#define AT572D940HF_BASE_SSC3 0xfffd0000 -#define AT572D940HF_BASE_TWI1 0xfffd4000 -#define AT572D940HF_BASE_EMAC 0xfffd8000 -#define AT572D940HF_BASE_CAN0 0xfffdc000 -#define AT572D940HF_BASE_CAN1 0xfffe0000 -#define AT91_BASE_SYS 0xffffea00 - - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) -#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) -#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) -#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) -#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) -#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) - -#define AT91_USART0 AT572D940HF_ID_US0 -#define AT91_USART1 AT572D940HF_ID_US1 -#define AT91_USART2 AT572D940HF_ID_US2 - - -/* - * Internal Memory. - */ -#define AT572D940HF_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -#define AT572D940HF_SRAM_SIZE (48 * SZ_1K) /* Internal SRAM size (48Kb) */ - -#define AT572D940HF_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT572D940HF_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ - -#define AT572D940HF_UHP_BASE 0x00500000 /* USB Host controller */ - - -#endif diff --git a/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h b/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h deleted file mode 100644 index b6751df0948..00000000000 --- a/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * include/mach//at572d940hf_matrix.h - * - * Antonio R. Costa <costa.antonior@gmail.com> - * Copyright (C) 2008 Atmel - * - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef AT572D940HF_MATRIX_H -#define AT572D940HF_MATRIX_H - -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ - -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0x7 << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ - -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ - -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ - -#define AT91_MATRIX_SFR0 (AT91_MATRIX + 0x110) /* Special Function Register 0 */ -#define AT91_MATRIX_SFR1 (AT91_MATRIX + 0x114) /* Special Function Register 1 */ -#define AT91_MATRIX_SFR2 (AT91_MATRIX + 0x118) /* Special Function Register 2 */ -#define AT91_MATRIX_SFR3 (AT91_MATRIX + 0x11C) /* Special Function Register 3 */ -#define AT91_MATRIX_SFR4 (AT91_MATRIX + 0x120) /* Special Function Register 4 */ -#define AT91_MATRIX_SFR5 (AT91_MATRIX + 0x124) /* Special Function Register 5 */ -#define AT91_MATRIX_SFR6 (AT91_MATRIX + 0x128) /* Special Function Register 6 */ -#define AT91_MATRIX_SFR7 (AT91_MATRIX + 0x12C) /* Special Function Register 7 */ -#define AT91_MATRIX_SFR8 (AT91_MATRIX + 0x130) /* Special Function Register 8 */ -#define AT91_MATRIX_SFR9 (AT91_MATRIX + 0x134) /* Special Function Register 9 */ -#define AT91_MATRIX_SFR10 (AT91_MATRIX + 0x138) /* Special Function Register 10 */ -#define AT91_MATRIX_SFR11 (AT91_MATRIX + 0x13C) /* Special Function Register 11 */ -#define AT91_MATRIX_SFR12 (AT91_MATRIX + 0x140) /* Special Function Register 12 */ -#define AT91_MATRIX_SFR13 (AT91_MATRIX + 0x144) /* Special Function Register 13 */ -#define AT91_MATRIX_SFR14 (AT91_MATRIX + 0x148) /* Special Function Register 14 */ -#define AT91_MATRIX_SFR15 (AT91_MATRIX + 0x14C) /* Special Function Register 15 */ - - -/* - * The following registers / bits are not defined in the Datasheet (Revision A) - */ - -#define AT91_MATRIX_TCR (AT91_MATRIX + 0x100) /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_ITCM_64 (7 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) -#define AT91_MATRIX_DTCM_64 (7 << 4) - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h index 9c6af973748..665993849a7 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ b/arch/arm/mach-at91/include/mach/at91cap9.h @@ -20,8 +20,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */ #define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */ #define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */ @@ -123,6 +121,4 @@ #define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */ #define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */ -#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 - #endif diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h index 78983155a07..99e0f8d02d7 100644 --- a/arch/arm/mach-at91/include/mach/at91rm9200.h +++ b/arch/arm/mach-at91/include/mach/at91rm9200.h @@ -19,8 +19,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripheral */ #define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h index 4e79036d3b8..8b6bf835cd7 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -20,8 +20,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91SAM9260_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9260_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9260_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index 2b561851812..eafbddaf523 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -18,8 +18,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h index 2091f1e42d4..e2d348213a7 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9263.h +++ b/arch/arm/mach-at91/include/mach/at91sam9263.h @@ -18,8 +18,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index a526869aee3..659304aa73d 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -18,8 +18,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Controller Interrupt */ #define AT91SAM9G45_ID_PIOA 2 /* Parallel I/O Controller A */ #define AT91SAM9G45_ID_PIOB 3 /* Parallel I/O Controller B */ #define AT91SAM9G45_ID_PIOC 4 /* Parallel I/O Controller C */ @@ -131,8 +129,6 @@ #define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */ #define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */ -#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 - #define CONSISTENT_DMA_SIZE SZ_4M /* diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h index 87ba8517ad9..41dbbe61055 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -17,8 +17,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Controller */ #define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h index 063ac44a020..a152ff87e68 100644 --- a/arch/arm/mach-at91/include/mach/at91x40.h +++ b/arch/arm/mach-at91/include/mach/at91x40.h @@ -15,8 +15,6 @@ /* * IRQ list. */ -#define AT91_ID_FIQ 0 /* FIQ */ -#define AT91_ID_SYS 1 /* System Peripheral */ #define AT91X40_ID_USART0 2 /* USART port 0 */ #define AT91X40_ID_USART1 3 /* USART port 1 */ #define AT91X40_ID_TC0 4 /* Timer/Counter 0 */ diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 2b499eb343a..ed544a0d5a1 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -90,7 +90,7 @@ struct at91_eth_data { extern void __init at91_add_device_eth(struct at91_eth_data *data); #if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) || defined(CONFIG_ARCH_AT572D940HF) + || defined(CONFIG_ARCH_AT91SAM9G45) #define eth_platform_data at91_eth_data #endif @@ -140,6 +140,7 @@ extern void __init at91_set_serial_console(unsigned portnr); extern struct platform_device *atmel_default_console_device; struct atmel_uart_data { + int num; /* port num */ short use_dma_tx; /* use transmit DMA? */ short use_dma_rx; /* use receive DMA? */ void __iomem *regs; /* virt. base address, if any */ @@ -203,9 +204,6 @@ extern void __init at91_init_leds(u8 cpu_led, u8 timer_led); extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); extern void __init at91_pwm_leds(struct gpio_led *leds, int nr); - /* AT572D940HF DSP */ -extern void __init at91_add_device_mAgic(void); - /* FIXME: this needs a better location, but gets stuff building again */ extern int at91_suspend_entering_slow_clock(void); diff --git a/arch/arm/mach-at91/include/mach/clkdev.h b/arch/arm/mach-at91/include/mach/clkdev.h new file mode 100644 index 00000000000..04b37a89801 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 0700f212530..df966c2bc2d 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -34,8 +34,6 @@ #define ARCH_ID_AT91SAM9XE256 0x329a93a0 #define ARCH_ID_AT91SAM9XE512 0x329aa3a0 -#define ARCH_ID_AT572D940HF 0x0e0303e0 - #define ARCH_ID_AT91M40800 0x14080044 #define ARCH_ID_AT91R40807 0x44080746 #define ARCH_ID_AT91M40807 0x14080745 @@ -90,9 +88,16 @@ static inline unsigned long at91cap9_rev_identify(void) #endif #ifdef CONFIG_ARCH_AT91RM9200 +extern int rm9200_type; +#define ARCH_REVISON_9200_BGA (0 << 0) +#define ARCH_REVISON_9200_PQFP (1 << 0) #define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200) +#define cpu_is_at91rm9200_bga() (!cpu_is_at91rm9200_pqfp()) +#define cpu_is_at91rm9200_pqfp() (cpu_is_at91rm9200() && rm9200_type & ARCH_REVISON_9200_PQFP) #else #define cpu_is_at91rm9200() (0) +#define cpu_is_at91rm9200_bga() (0) +#define cpu_is_at91rm9200_pqfp() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9260 @@ -181,12 +186,6 @@ static inline unsigned long at91cap9_rev_identify(void) #define cpu_is_at91cap9_revC() (0) #endif -#ifdef CONFIG_ARCH_AT572D940HF -#define cpu_is_at572d940hf() (at91_cpu_identify() == ARCH_ID_AT572D940HF) -#else -#define cpu_is_at572d940hf() (0) -#endif - /* * Since this is ARM, we will never run on any AVR32 CPU. But these * definitions may reduce clutter in common drivers. diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 3d64a75e3ed..1008b9fb507 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -32,13 +32,17 @@ #include <mach/at91cap9.h> #elif defined(CONFIG_ARCH_AT91X40) #include <mach/at91x40.h> -#elif defined(CONFIG_ARCH_AT572D940HF) -#include <mach/at572d940hf.h> #else #error "Unsupported AT91 processor" #endif +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ + #ifdef CONFIG_MMU /* * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF @@ -82,13 +86,6 @@ #define AT91_CHIPSELECT_6 0x70000000 #define AT91_CHIPSELECT_7 0x80000000 -/* SDRAM */ -#ifdef CONFIG_DRAM_BASE -#define AT91_SDRAM_BASE CONFIG_DRAM_BASE -#else -#define AT91_SDRAM_BASE AT91_CHIPSELECT_1 -#endif - /* Clocks */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ diff --git a/arch/arm/mach-at91/include/mach/memory.h b/arch/arm/mach-at91/include/mach/memory.h index c2cfe504064..401c207f2f3 100644 --- a/arch/arm/mach-at91/include/mach/memory.h +++ b/arch/arm/mach-at91/include/mach/memory.h @@ -23,6 +23,4 @@ #include <mach/hardware.h> -#define PLAT_PHYS_OFFSET (AT91_SDRAM_BASE) - #endif diff --git a/arch/arm/mach-at91/include/mach/stamp9g20.h b/arch/arm/mach-at91/include/mach/stamp9g20.h index 6120f9c46d5..f62c0abca4b 100644 --- a/arch/arm/mach-at91/include/mach/stamp9g20.h +++ b/arch/arm/mach-at91/include/mach/stamp9g20.h @@ -1,7 +1,7 @@ #ifndef __MACH_STAMP9G20_H #define __MACH_STAMP9G20_H -void stamp9g20_map_io(void); +void stamp9g20_init_early(void); void stamp9g20_board_init(void); #endif diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h new file mode 100644 index 00000000000..b855ee75f72 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/system_rev.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Under GPLv2 only + */ + +#ifndef __ARCH_SYSTEM_REV_H__ +#define __ARCH_SYSTEM_REV_H__ + +/* + * board revision encoding + * mach specific + * the 16-31 bit are reserved for at91 generic information + * + * bit 31: + * 0 => nand 16 bit + * 1 => nand 8 bit + */ +#define BOARD_HAVE_NAND_8BIT (1 << 31) +static int inline board_have_nand_8bit(void) +{ + return system_rev & BOARD_HAVE_NAND_8BIT; +} + +#endif /* __ARCH_SYSTEM_REV_H__ */ diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h index 05a6e8af80c..31ac2d97f14 100644 --- a/arch/arm/mach-at91/include/mach/timex.h +++ b/arch/arm/mach-at91/include/mach/timex.h @@ -82,11 +82,6 @@ #define AT91X40_MASTER_CLOCK 40000000 #define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK) -#elif defined(CONFIG_ARCH_AT572D940HF) - -#define AT572D940HF_MASTER_CLOCK 80000000 -#define CLOCK_TICK_RATE (AT572D940HF_MASTER_CLOCK/16) - #endif #endif diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index b95b9196dee..133aac40585 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -1055,7 +1055,7 @@ int da850_register_pm(struct platform_device *pdev) if (!pdata->cpupll_reg_base) return -ENOMEM; - pdata->ddrpll_reg_base = ioremap(DA8XX_PLL1_BASE, SZ_4K); + pdata->ddrpll_reg_base = ioremap(DA850_PLL1_BASE, SZ_4K); if (!pdata->ddrpll_reg_base) { ret = -ENOMEM; goto no_ddrpll_mem; diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 58a02dc7b15..4e66881c7ae 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -24,23 +24,25 @@ #include "clock.h" #define DA8XX_TPCC_BASE 0x01c00000 -#define DA850_MMCSD1_BASE 0x01e1b000 -#define DA850_TPCC1_BASE 0x01e30000 #define DA8XX_TPTC0_BASE 0x01c08000 #define DA8XX_TPTC1_BASE 0x01c08400 -#define DA850_TPTC2_BASE 0x01e38000 #define DA8XX_WDOG_BASE 0x01c21000 /* DA8XX_TIMER64P1_BASE */ #define DA8XX_I2C0_BASE 0x01c22000 -#define DA8XX_RTC_BASE 0x01C23000 +#define DA8XX_RTC_BASE 0x01c23000 +#define DA8XX_MMCSD0_BASE 0x01c40000 +#define DA8XX_SPI0_BASE 0x01c41000 +#define DA830_SPI1_BASE 0x01e12000 +#define DA8XX_LCD_CNTRL_BASE 0x01e13000 +#define DA850_MMCSD1_BASE 0x01e1b000 #define DA8XX_EMAC_CPPI_PORT_BASE 0x01e20000 #define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000 #define DA8XX_EMAC_CPGMAC_BASE 0x01e23000 #define DA8XX_EMAC_MDIO_BASE 0x01e24000 -#define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_I2C1_BASE 0x01e28000 -#define DA8XX_SPI0_BASE 0x01c41000 -#define DA830_SPI1_BASE 0x01e12000 +#define DA850_TPCC1_BASE 0x01e30000 +#define DA850_TPTC2_BASE 0x01e38000 #define DA850_SPI1_BASE 0x01f0e000 +#define DA8XX_DDR2_CTL_BASE 0xb0000000 #define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000 #define DA8XX_EMAC_MOD_REG_OFFSET 0x2000 diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 22ebc64bc9d..8f4f736aa26 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -33,6 +33,9 @@ #define DM365_MMCSD0_BASE 0x01D11000 #define DM365_MMCSD1_BASE 0x01D00000 +/* System control register offsets */ +#define DM64XX_VDD3P3V_PWDN 0x48 + static struct resource i2c_resources[] = { { .start = DAVINCI_I2C_BASE, diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index e4fc1af8500..ad64da713fc 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -64,13 +64,9 @@ extern unsigned int da850_max_speed; #define DA8XX_TIMER64P1_BASE 0x01c21000 #define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_PSC1_BASE 0x01e27000 -#define DA8XX_LCD_CNTRL_BASE 0x01e13000 -#define DA8XX_PLL1_BASE 0x01e1a000 -#define DA8XX_MMCSD0_BASE 0x01c40000 #define DA8XX_AEMIF_CS2_BASE 0x60000000 #define DA8XX_AEMIF_CS3_BASE 0x62000000 #define DA8XX_AEMIF_CTL_BASE 0x68000000 -#define DA8XX_DDR2_CTL_BASE 0xb0000000 #define DA8XX_ARM_RAM_BASE 0xffff0000 void __init da830_init(void); diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h index c45ba1f62a1..414e0b93e74 100644 --- a/arch/arm/mach-davinci/include/mach/hardware.h +++ b/arch/arm/mach-davinci/include/mach/hardware.h @@ -21,9 +21,6 @@ */ #define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000 -/* System control register offsets */ -#define DM64XX_VDD3P3V_PWDN 0x48 - /* * I/O mapping */ diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 805196207ce..b92c1e55714 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -169,9 +169,11 @@ config MACH_NURI select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S3C_DEV_I2C1 + select S3C_DEV_I2C3 select S3C_DEV_I2C5 select S5P_DEV_USB_EHCI select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_SDHCI select SAMSUNG_DEV_PWM diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile index 777897551e4..a9bb94fabaa 100644 --- a/arch/arm/mach-exynos4/Makefile +++ b/arch/arm/mach-exynos4/Makefile @@ -13,9 +13,10 @@ obj- := # Core support for EXYNOS4 system obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o -obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o gpiolib.o irq-eint.o dma.o +obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o +obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o diff --git a/arch/arm/mach-exynos4/cpuidle.c b/arch/arm/mach-exynos4/cpuidle.c new file mode 100644 index 00000000000..bf7e96f2793 --- /dev/null +++ b/arch/arm/mach-exynos4/cpuidle.c @@ -0,0 +1,86 @@ +/* linux/arch/arm/mach-exynos4/cpuidle.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/cpuidle.h> +#include <linux/io.h> + +#include <asm/proc-fns.h> + +static int exynos4_enter_idle(struct cpuidle_device *dev, + struct cpuidle_state *state); + +static struct cpuidle_state exynos4_cpuidle_set[] = { + [0] = { + .enter = exynos4_enter_idle, + .exit_latency = 1, + .target_residency = 100000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "IDLE", + .desc = "ARM clock gating(WFI)", + }, +}; + +static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device); + +static struct cpuidle_driver exynos4_idle_driver = { + .name = "exynos4_idle", + .owner = THIS_MODULE, +}; + +static int exynos4_enter_idle(struct cpuidle_device *dev, + struct cpuidle_state *state) +{ + struct timeval before, after; + int idle_time; + + local_irq_disable(); + do_gettimeofday(&before); + + cpu_do_idle(); + + do_gettimeofday(&after); + local_irq_enable(); + idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + + (after.tv_usec - before.tv_usec); + + return idle_time; +} + +static int __init exynos4_init_cpuidle(void) +{ + int i, max_cpuidle_state, cpu_id; + struct cpuidle_device *device; + + cpuidle_register_driver(&exynos4_idle_driver); + + for_each_cpu(cpu_id, cpu_online_mask) { + device = &per_cpu(exynos4_cpuidle_device, cpu_id); + device->cpu = cpu_id; + + device->state_count = (sizeof(exynos4_cpuidle_set) / + sizeof(struct cpuidle_state)); + + max_cpuidle_state = device->state_count; + + for (i = 0; i < max_cpuidle_state; i++) { + memcpy(&device->states[i], &exynos4_cpuidle_set[i], + sizeof(struct cpuidle_state)); + } + + if (cpuidle_register_device(device)) { + printk(KERN_ERR "CPUidle register device failed\n,"); + return -EIO; + } + } + return 0; +} +device_initcall(exynos4_init_cpuidle); diff --git a/arch/arm/mach-exynos4/gpiolib.c b/arch/arm/mach-exynos4/gpiolib.c deleted file mode 100644 index d54ca6adb66..00000000000 --- a/arch/arm/mach-exynos4/gpiolib.c +++ /dev/null @@ -1,365 +0,0 @@ -/* linux/arch/arm/mach-exynos4/gpiolib.c - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <mach/map.h> - -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> - -static struct s3c_gpio_cfg gpio_cfg = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -/* - * Following are the gpio banks in v310. - * - * The 'config' member when left to NULL, is initialized to the default - * structure gpio_cfg in the init function below. - * - * The 'base' member is also initialized in the init function below. - * Note: The initialization of 'base' member of s3c_gpio_chip structure - * uses the above macro and depends on the banks being listed in order here. - */ -static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = { - { - .chip = { - .base = EXYNOS4_GPA0(0), - .ngpio = EXYNOS4_GPIO_A0_NR, - .label = "GPA0", - }, - }, { - .chip = { - .base = EXYNOS4_GPA1(0), - .ngpio = EXYNOS4_GPIO_A1_NR, - .label = "GPA1", - }, - }, { - .chip = { - .base = EXYNOS4_GPB(0), - .ngpio = EXYNOS4_GPIO_B_NR, - .label = "GPB", - }, - }, { - .chip = { - .base = EXYNOS4_GPC0(0), - .ngpio = EXYNOS4_GPIO_C0_NR, - .label = "GPC0", - }, - }, { - .chip = { - .base = EXYNOS4_GPC1(0), - .ngpio = EXYNOS4_GPIO_C1_NR, - .label = "GPC1", - }, - }, { - .chip = { - .base = EXYNOS4_GPD0(0), - .ngpio = EXYNOS4_GPIO_D0_NR, - .label = "GPD0", - }, - }, { - .chip = { - .base = EXYNOS4_GPD1(0), - .ngpio = EXYNOS4_GPIO_D1_NR, - .label = "GPD1", - }, - }, { - .chip = { - .base = EXYNOS4_GPE0(0), - .ngpio = EXYNOS4_GPIO_E0_NR, - .label = "GPE0", - }, - }, { - .chip = { - .base = EXYNOS4_GPE1(0), - .ngpio = EXYNOS4_GPIO_E1_NR, - .label = "GPE1", - }, - }, { - .chip = { - .base = EXYNOS4_GPE2(0), - .ngpio = EXYNOS4_GPIO_E2_NR, - .label = "GPE2", - }, - }, { - .chip = { - .base = EXYNOS4_GPE3(0), - .ngpio = EXYNOS4_GPIO_E3_NR, - .label = "GPE3", - }, - }, { - .chip = { - .base = EXYNOS4_GPE4(0), - .ngpio = EXYNOS4_GPIO_E4_NR, - .label = "GPE4", - }, - }, { - .chip = { - .base = EXYNOS4_GPF0(0), - .ngpio = EXYNOS4_GPIO_F0_NR, - .label = "GPF0", - }, - }, { - .chip = { - .base = EXYNOS4_GPF1(0), - .ngpio = EXYNOS4_GPIO_F1_NR, - .label = "GPF1", - }, - }, { - .chip = { - .base = EXYNOS4_GPF2(0), - .ngpio = EXYNOS4_GPIO_F2_NR, - .label = "GPF2", - }, - }, { - .chip = { - .base = EXYNOS4_GPF3(0), - .ngpio = EXYNOS4_GPIO_F3_NR, - .label = "GPF3", - }, - }, -}; - -static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = { - { - .chip = { - .base = EXYNOS4_GPJ0(0), - .ngpio = EXYNOS4_GPIO_J0_NR, - .label = "GPJ0", - }, - }, { - .chip = { - .base = EXYNOS4_GPJ1(0), - .ngpio = EXYNOS4_GPIO_J1_NR, - .label = "GPJ1", - }, - }, { - .chip = { - .base = EXYNOS4_GPK0(0), - .ngpio = EXYNOS4_GPIO_K0_NR, - .label = "GPK0", - }, - }, { - .chip = { - .base = EXYNOS4_GPK1(0), - .ngpio = EXYNOS4_GPIO_K1_NR, - .label = "GPK1", - }, - }, { - .chip = { - .base = EXYNOS4_GPK2(0), - .ngpio = EXYNOS4_GPIO_K2_NR, - .label = "GPK2", - }, - }, { - .chip = { - .base = EXYNOS4_GPK3(0), - .ngpio = EXYNOS4_GPIO_K3_NR, - .label = "GPK3", - }, - }, { - .chip = { - .base = EXYNOS4_GPL0(0), - .ngpio = EXYNOS4_GPIO_L0_NR, - .label = "GPL0", - }, - }, { - .chip = { - .base = EXYNOS4_GPL1(0), - .ngpio = EXYNOS4_GPIO_L1_NR, - .label = "GPL1", - }, - }, { - .chip = { - .base = EXYNOS4_GPL2(0), - .ngpio = EXYNOS4_GPIO_L2_NR, - .label = "GPL2", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY0(0), - .ngpio = EXYNOS4_GPIO_Y0_NR, - .label = "GPY0", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY1(0), - .ngpio = EXYNOS4_GPIO_Y1_NR, - .label = "GPY1", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY2(0), - .ngpio = EXYNOS4_GPIO_Y2_NR, - .label = "GPY2", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY3(0), - .ngpio = EXYNOS4_GPIO_Y3_NR, - .label = "GPY3", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY4(0), - .ngpio = EXYNOS4_GPIO_Y4_NR, - .label = "GPY4", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY5(0), - .ngpio = EXYNOS4_GPIO_Y5_NR, - .label = "GPY5", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY6(0), - .ngpio = EXYNOS4_GPIO_Y6_NR, - .label = "GPY6", - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC00), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(0), - .chip = { - .base = EXYNOS4_GPX0(0), - .ngpio = EXYNOS4_GPIO_X0_NR, - .label = "GPX0", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC20), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(8), - .chip = { - .base = EXYNOS4_GPX1(0), - .ngpio = EXYNOS4_GPIO_X1_NR, - .label = "GPX1", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC40), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(16), - .chip = { - .base = EXYNOS4_GPX2(0), - .ngpio = EXYNOS4_GPIO_X2_NR, - .label = "GPX2", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC60), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(24), - .chip = { - .base = EXYNOS4_GPX3(0), - .ngpio = EXYNOS4_GPIO_X3_NR, - .label = "GPX3", - .to_irq = samsung_gpiolib_to_irq, - }, - }, -}; - -static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = { - { - .chip = { - .base = EXYNOS4_GPZ(0), - .ngpio = EXYNOS4_GPIO_Z_NR, - .label = "GPZ", - }, - }, -}; - -static __init int exynos4_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip; - int i; - int group = 0; - int nr_chips; - - /* GPIO part 1 */ - - chip = exynos4_gpio_part1_4bit; - nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - /* Assign the GPIO interrupt group */ - chip->group = group++; - } - if (chip->base == NULL) - chip->base = S5P_VA_GPIO1 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips); - - /* GPIO part 2 */ - - chip = exynos4_gpio_part2_4bit; - nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - /* Assign the GPIO interrupt group */ - chip->group = group++; - } - if (chip->base == NULL) - chip->base = S5P_VA_GPIO2 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips); - - /* GPIO part 3 */ - - chip = exynos4_gpio_part3_4bit; - nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - /* Assign the GPIO interrupt group */ - chip->group = group++; - } - if (chip->base == NULL) - chip->base = S5P_VA_GPIO3 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips); - s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS); - s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS); - - return 0; -} -core_initcall(exynos4_gpiolib_init); diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c index bb5d12f43af..642702bb5b1 100644 --- a/arch/arm/mach-exynos4/mach-nuri.c +++ b/arch/arm/mach-exynos4/mach-nuri.c @@ -12,6 +12,7 @@ #include <linux/serial_core.h> #include <linux/input.h> #include <linux/i2c.h> +#include <linux/i2c/atmel_mxt_ts.h> #include <linux/gpio_keys.h> #include <linux/gpio.h> #include <linux/regulator/machine.h> @@ -32,6 +33,8 @@ #include <plat/sdhci.h> #include <plat/ehci.h> #include <plat/clock.h> +#include <plat/gpio-cfg.h> +#include <plat/iic.h> #include <mach/map.h> @@ -259,6 +262,88 @@ static struct i2c_board_info i2c1_devs[] __initdata = { /* Gyro, To be updated */ }; +/* TSP */ +static u8 mxt_init_vals[] = { + /* MXT_GEN_COMMAND(6) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_GEN_POWER(7) */ + 0x20, 0xff, 0x32, + /* MXT_GEN_ACQUIRE(8) */ + 0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23, + /* MXT_TOUCH_MULTI(9) */ + 0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00, + 0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, + /* MXT_TOUCH_KEYARRAY(15) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, + 0x00, + /* MXT_SPT_GPIOPWM(19) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_PROCI_GRIPFACE(20) */ + 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04, + 0x0f, 0x0a, + /* MXT_PROCG_NOISE(22) */ + 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00, + 0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03, + /* MXT_TOUCH_PROXIMITY(23) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_PROCI_ONETOUCH(24) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_SPT_SELFTEST(25) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + /* MXT_PROCI_TWOTOUCH(27) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_SPT_CTECONFIG(28) */ + 0x00, 0x00, 0x02, 0x08, 0x10, 0x00, +}; + +static struct mxt_platform_data mxt_platform_data = { + .config = mxt_init_vals, + .config_length = ARRAY_SIZE(mxt_init_vals), + + .x_line = 18, + .y_line = 11, + .x_size = 1024, + .y_size = 600, + .blen = 0x1, + .threshold = 0x28, + .voltage = 2800000, /* 2.8V */ + .orient = MXT_DIAGONAL_COUNTER, + .irqflags = IRQF_TRIGGER_FALLING, +}; + +static struct s3c2410_platform_i2c i2c3_data __initdata = { + .flags = 0, + .bus_num = 3, + .slave_addr = 0x10, + .frequency = 400 * 1000, + .sda_delay = 100, +}; + +static struct i2c_board_info i2c3_devs[] __initdata = { + { + I2C_BOARD_INFO("atmel_mxt_ts", 0x4a), + .platform_data = &mxt_platform_data, + .irq = IRQ_EINT(4), + }, +}; + +static void __init nuri_tsp_init(void) +{ + int gpio; + + /* TOUCH_INT: XEINT_4 */ + gpio = EXYNOS4_GPX0(4); + gpio_request(gpio, "TOUCH_INT"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); +} + /* GPIO I2C 5 (PMIC) */ static struct i2c_board_info i2c5_devs[] __initdata = { /* max8997, To be updated */ @@ -283,6 +368,7 @@ static struct platform_device *nuri_devices[] __initdata = { &s3c_device_wdt, &s3c_device_timer[0], &s5p_device_ehci, + &s3c_device_i2c3, /* NURI Devices */ &nuri_gpio_keys, @@ -300,8 +386,11 @@ static void __init nuri_map_io(void) static void __init nuri_machine_init(void) { nuri_sdhci_init(); + nuri_tsp_init(); i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); + s3c_i2c3_set_platdata(&i2c3_data); + i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs)); i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); nuri_ehci_init(); diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c index af7b68a6b25..88cc422ee44 100644 --- a/arch/arm/mach-gemini/board-wbd111.c +++ b/arch/arm/mach-gemini/board-wbd111.c @@ -84,7 +84,6 @@ static struct sys_timer wbd111_timer = { .init = gemini_timer_init, }; -#ifdef CONFIG_MTD_PARTITIONS static struct mtd_partition wbd111_partitions[] = { { .name = "RedBoot", @@ -116,11 +115,7 @@ static struct mtd_partition wbd111_partitions[] = { .mask_flags = MTD_WRITEABLE, } }; -#define wbd111_num_partitions ARRAY_SIZE(wbd111_partitions) -#else -#define wbd111_partitions NULL -#define wbd111_num_partitions 0 -#endif /* CONFIG_MTD_PARTITIONS */ +#define wbd111_num_partitions ARRAY_SIZE(wbd111_partitions) static void __init wbd111_init(void) { diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c index 99e5bbecf92..3a220347bc8 100644 --- a/arch/arm/mach-gemini/board-wbd222.c +++ b/arch/arm/mach-gemini/board-wbd222.c @@ -84,7 +84,6 @@ static struct sys_timer wbd222_timer = { .init = gemini_timer_init, }; -#ifdef CONFIG_MTD_PARTITIONS static struct mtd_partition wbd222_partitions[] = { { .name = "RedBoot", @@ -116,11 +115,7 @@ static struct mtd_partition wbd222_partitions[] = { .mask_flags = MTD_WRITEABLE, } }; -#define wbd222_num_partitions ARRAY_SIZE(wbd222_partitions) -#else -#define wbd222_partitions NULL -#define wbd222_num_partitions 0 -#endif /* CONFIG_MTD_PARTITIONS */ +#define wbd222_num_partitions ARRAY_SIZE(wbd222_partitions) static void __init wbd222_init(void) { diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 14078338678..dca4f7f9f4f 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -60,7 +60,6 @@ static struct platform_device ixdp425_flash = { #if defined(CONFIG_MTD_NAND_PLATFORM) || \ defined(CONFIG_MTD_NAND_PLATFORM_MODULE) -#ifdef CONFIG_MTD_PARTITIONS const char *part_probes[] = { "cmdlinepart", NULL }; static struct mtd_partition ixdp425_partitions[] = { @@ -74,7 +73,6 @@ static struct mtd_partition ixdp425_partitions[] = { .size = MTDPART_SIZ_FULL }, }; -#endif static void ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) @@ -103,11 +101,9 @@ static struct platform_nand_data ixdp425_flash_nand_data = { .nr_chips = 1, .chip_delay = 30, .options = NAND_NO_AUTOINCR, -#ifdef CONFIG_MTD_PARTITIONS .part_probe_types = part_probes, .partitions = ixdp425_partitions, .nr_partitions = ARRAY_SIZE(ixdp425_partitions), -#endif }, .ctrl = { .cmd_ctrl = ixdp425_flash_nand_cmd_ctrl diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c index 5b84bcd3027..b9913234bbf 100644 --- a/arch/arm/mach-netx/fb.c +++ b/arch/arm/mach-netx/fb.c @@ -103,7 +103,6 @@ static struct amba_device fb_device = { .flags = IORESOURCE_MEM, }, .irq = { NETX_IRQ_LCD, NO_IRQ }, - .periphid = 0x10112400, }; int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel) diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 71f3ea62397..3c5e0f522e9 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -6,7 +6,6 @@ config MACH_NOMADIK_8815NHK bool "ST 8815 Nomadik Hardware Kit (evaluation board)" select NOMADIK_8815 select HAS_MTU - select NOMADIK_GPIO endmenu diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 2b00f72e8e3..f6247e71a19 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -23,6 +23,7 @@ #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/mmc/host.h> +#include <linux/power/isp1704_charger.h> #include <plat/mcspi.h> #include <plat/board.h> @@ -53,6 +54,8 @@ #define RX51_FMTX_RESET_GPIO 163 #define RX51_FMTX_IRQ 53 +#define RX51_USB_TRANSCEIVER_RST_GPIO 67 + /* list all spi devices here */ enum { RX51_SPI_WL1251, @@ -111,10 +114,30 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { }, }; +static void rx51_charger_set_power(bool on) +{ + gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on); +} + +static struct isp1704_charger_data rx51_charger_data = { + .set_power = rx51_charger_set_power, +}; + static struct platform_device rx51_charger_device = { - .name = "isp1704_charger", + .name = "isp1704_charger", + .dev = { + .platform_data = &rx51_charger_data, + }, }; +static void __init rx51_charger_init(void) +{ + WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO, + GPIOF_OUT_INIT_LOW, "isp1704_reset")); + + platform_device_register(&rx51_charger_device); +} + #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #define RX51_GPIO_CAMERA_LENS_COVER 110 @@ -961,6 +984,6 @@ void __init rx51_peripherals_init(void) if (partition) omap2_hsmmc_init(mmc); - platform_device_register(&rx51_charger_device); + rx51_charger_init(); } diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 2fc9f94cdd2..cd19309fd3b 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -153,7 +153,6 @@ config MACH_XCEP bool "Iskratel Electronics XCEP" select PXA25x select MTD - select MTD_PARTITIONS select MTD_PHYSMAP select MTD_CFI_INTELEXT select MTD_CFI diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index 44440cbd762..dabc141243f 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -58,8 +58,6 @@ #include <plat/cpu.h> #include <plat/gpio-cfg.h> -#ifdef CONFIG_MTD_PARTITIONS - #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/map.h> @@ -113,7 +111,6 @@ static struct platform_device amlm5900_device_nor = { .num_resources = 1, .resource = &amlm5900_nor_resource, }; -#endif static struct map_desc amlm5900_iodesc[] __initdata = { }; @@ -158,9 +155,7 @@ static struct platform_device *amlm5900_devices[] __initdata = { &s3c_device_rtc, &s3c_device_usbgadget, &s3c_device_sdi, -#ifdef CONFIG_MTD_PARTITIONS &amlm5900_device_nor, -#endif }; static void __init amlm5900_map_io(void) diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c index a15d0621c22..43c2b831b9e 100644 --- a/arch/arm/mach-s3c2410/mach-tct_hammer.c +++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c @@ -49,8 +49,6 @@ #include <plat/devs.h> #include <plat/cpu.h> -#ifdef CONFIG_MTD_PARTITIONS - #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/map.h> @@ -91,8 +89,6 @@ static struct platform_device tct_hammer_device_nor = { .resource = &tct_hammer_nor_resource, }; -#endif - static struct map_desc tct_hammer_iodesc[] __initdata = { }; @@ -133,9 +129,7 @@ static struct platform_device *tct_hammer_devices[] __initdata = { &s3c_device_rtc, &s3c_device_usbgadget, &s3c_device_sdi, -#ifdef CONFIG_MTD_PARTITIONS &tct_hammer_device_nor, -#endif }; static void __init tct_hammer_map_io(void) diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c index 405e6212891..82db072cb83 100644 --- a/arch/arm/mach-s3c64xx/dev-spi.c +++ b/arch/arm/mach-s3c64xx/dev-spi.c @@ -16,7 +16,6 @@ #include <mach/dma.h> #include <mach/map.h> -#include <mach/gpio-bank-c.h> #include <mach/spi-clocks.h> #include <mach/irqs.h> @@ -40,23 +39,15 @@ static char *spi_src_clks[] = { */ static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev) { + unsigned int base; + switch (pdev->id) { case 0: - s3c_gpio_cfgpin(S3C64XX_GPC(0), S3C64XX_GPC0_SPI_MISO0); - s3c_gpio_cfgpin(S3C64XX_GPC(1), S3C64XX_GPC1_SPI_CLKO); - s3c_gpio_cfgpin(S3C64XX_GPC(2), S3C64XX_GPC2_SPI_MOSIO); - s3c_gpio_setpull(S3C64XX_GPC(0), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPC(1), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPC(2), S3C_GPIO_PULL_UP); + base = S3C64XX_GPC(0); break; case 1: - s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_SPI_MISO1); - s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_SPI_CLK1); - s3c_gpio_cfgpin(S3C64XX_GPC(6), S3C64XX_GPC6_SPI_MOSI1); - s3c_gpio_setpull(S3C64XX_GPC(4), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPC(5), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPC(6), S3C_GPIO_PULL_UP); + base = S3C64XX_GPC(4); break; default: @@ -64,6 +55,9 @@ static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev) return -EINVAL; } + s3c_gpio_cfgall_range(base, 3, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; } diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h deleted file mode 100644 index 34212e1a7e8..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h +++ /dev/null @@ -1,48 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank A register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPACON (S3C64XX_GPA_BASE + 0x00) -#define S3C64XX_GPADAT (S3C64XX_GPA_BASE + 0x04) -#define S3C64XX_GPAPUD (S3C64XX_GPA_BASE + 0x08) -#define S3C64XX_GPACONSLP (S3C64XX_GPA_BASE + 0x0c) -#define S3C64XX_GPAPUDSLP (S3C64XX_GPA_BASE + 0x10) - -#define S3C64XX_GPA_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPA_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPA_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPA0_UART_RXD0 (0x02 << 0) -#define S3C64XX_GPA0_EINT_G1_0 (0x07 << 0) - -#define S3C64XX_GPA1_UART_TXD0 (0x02 << 4) -#define S3C64XX_GPA1_EINT_G1_1 (0x07 << 4) - -#define S3C64XX_GPA2_UART_nCTS0 (0x02 << 8) -#define S3C64XX_GPA2_EINT_G1_2 (0x07 << 8) - -#define S3C64XX_GPA3_UART_nRTS0 (0x02 << 12) -#define S3C64XX_GPA3_EINT_G1_3 (0x07 << 12) - -#define S3C64XX_GPA4_UART_RXD1 (0x02 << 16) -#define S3C64XX_GPA4_EINT_G1_4 (0x07 << 16) - -#define S3C64XX_GPA5_UART_TXD1 (0x02 << 20) -#define S3C64XX_GPA5_EINT_G1_5 (0x07 << 20) - -#define S3C64XX_GPA6_UART_nCTS1 (0x02 << 24) -#define S3C64XX_GPA6_EINT_G1_6 (0x07 << 24) - -#define S3C64XX_GPA7_UART_nRTS1 (0x02 << 28) -#define S3C64XX_GPA7_EINT_G1_7 (0x07 << 28) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h deleted file mode 100644 index 7232c037e64..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h +++ /dev/null @@ -1,60 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank B register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPBCON (S3C64XX_GPB_BASE + 0x00) -#define S3C64XX_GPBDAT (S3C64XX_GPB_BASE + 0x04) -#define S3C64XX_GPBPUD (S3C64XX_GPB_BASE + 0x08) -#define S3C64XX_GPBCONSLP (S3C64XX_GPB_BASE + 0x0c) -#define S3C64XX_GPBPUDSLP (S3C64XX_GPB_BASE + 0x10) - -#define S3C64XX_GPB_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPB_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPB_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPB0_UART_RXD2 (0x02 << 0) -#define S3C64XX_GPB0_EXTDMA_REQ (0x03 << 0) -#define S3C64XX_GPB0_IrDA_RXD (0x04 << 0) -#define S3C64XX_GPB0_ADDR_CF0 (0x05 << 0) -#define S3C64XX_GPB0_EINT_G1_8 (0x07 << 0) - -#define S3C64XX_GPB1_UART_TXD2 (0x02 << 4) -#define S3C64XX_GPB1_EXTDMA_ACK (0x03 << 4) -#define S3C64XX_GPB1_IrDA_TXD (0x04 << 4) -#define S3C64XX_GPB1_ADDR_CF1 (0x05 << 4) -#define S3C64XX_GPB1_EINT_G1_9 (0x07 << 4) - -#define S3C64XX_GPB2_UART_RXD3 (0x02 << 8) -#define S3C64XX_GPB2_IrDA_RXD (0x03 << 8) -#define S3C64XX_GPB2_EXTDMA_REQ (0x04 << 8) -#define S3C64XX_GPB2_ADDR_CF2 (0x05 << 8) -#define S3C64XX_GPB2_I2C_SCL1 (0x06 << 8) -#define S3C64XX_GPB2_EINT_G1_10 (0x07 << 8) - -#define S3C64XX_GPB3_UART_TXD3 (0x02 << 12) -#define S3C64XX_GPB3_IrDA_TXD (0x03 << 12) -#define S3C64XX_GPB3_EXTDMA_ACK (0x04 << 12) -#define S3C64XX_GPB3_I2C_SDA1 (0x06 << 12) -#define S3C64XX_GPB3_EINT_G1_11 (0x07 << 12) - -#define S3C64XX_GPB4_IrDA_SDBW (0x02 << 16) -#define S3C64XX_GPB4_CAM_FIELD (0x03 << 16) -#define S3C64XX_GPB4_CF_DATA_DIR (0x04 << 16) -#define S3C64XX_GPB4_EINT_G1_12 (0x07 << 16) - -#define S3C64XX_GPB5_I2C_SCL0 (0x02 << 20) -#define S3C64XX_GPB5_EINT_G1_13 (0x07 << 20) - -#define S3C64XX_GPB6_I2C_SDA0 (0x02 << 24) -#define S3C64XX_GPB6_EINT_G1_14 (0x07 << 24) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h deleted file mode 100644 index db189ab1639..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h +++ /dev/null @@ -1,53 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank C register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPCCON (S3C64XX_GPC_BASE + 0x00) -#define S3C64XX_GPCDAT (S3C64XX_GPC_BASE + 0x04) -#define S3C64XX_GPCPUD (S3C64XX_GPC_BASE + 0x08) -#define S3C64XX_GPCCONSLP (S3C64XX_GPC_BASE + 0x0c) -#define S3C64XX_GPCPUDSLP (S3C64XX_GPC_BASE + 0x10) - -#define S3C64XX_GPC_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPC_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPC_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPC0_SPI_MISO0 (0x02 << 0) -#define S3C64XX_GPC0_EINT_G2_0 (0x07 << 0) - -#define S3C64XX_GPC1_SPI_CLKO (0x02 << 4) -#define S3C64XX_GPC1_EINT_G2_1 (0x07 << 4) - -#define S3C64XX_GPC2_SPI_MOSIO (0x02 << 8) -#define S3C64XX_GPC2_EINT_G2_2 (0x07 << 8) - -#define S3C64XX_GPC3_SPI_nCSO (0x02 << 12) -#define S3C64XX_GPC3_EINT_G2_3 (0x07 << 12) - -#define S3C64XX_GPC4_SPI_MISO1 (0x02 << 16) -#define S3C64XX_GPC4_MMC2_CMD (0x03 << 16) -#define S3C64XX_GPC4_I2S_V40_DO0 (0x05 << 16) -#define S3C64XX_GPC4_EINT_G2_4 (0x07 << 16) - -#define S3C64XX_GPC5_SPI_CLK1 (0x02 << 20) -#define S3C64XX_GPC5_MMC2_CLK (0x03 << 20) -#define S3C64XX_GPC5_I2S_V40_DO1 (0x05 << 20) -#define S3C64XX_GPC5_EINT_G2_5 (0x07 << 20) - -#define S3C64XX_GPC6_SPI_MOSI1 (0x02 << 24) -#define S3C64XX_GPC6_EINT_G2_6 (0x07 << 24) - -#define S3C64XX_GPC7_SPI_nCS1 (0x02 << 28) -#define S3C64XX_GPC7_I2S_V40_DO2 (0x05 << 28) -#define S3C64XX_GPC7_EINT_G2_7 (0x07 << 28) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h deleted file mode 100644 index 1a01cee7aca..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h +++ /dev/null @@ -1,49 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank D register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPDCON (S3C64XX_GPD_BASE + 0x00) -#define S3C64XX_GPDDAT (S3C64XX_GPD_BASE + 0x04) -#define S3C64XX_GPDPUD (S3C64XX_GPD_BASE + 0x08) -#define S3C64XX_GPDCONSLP (S3C64XX_GPD_BASE + 0x0c) -#define S3C64XX_GPDPUDSLP (S3C64XX_GPD_BASE + 0x10) - -#define S3C64XX_GPD_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPD_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPD_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPD0_PCM0_SCLK (0x02 << 0) -#define S3C64XX_GPD0_I2S0_CLK (0x03 << 0) -#define S3C64XX_GPD0_AC97_BITCLK (0x04 << 0) -#define S3C64XX_GPD0_EINT_G3_0 (0x07 << 0) - -#define S3C64XX_GPD1_PCM0_EXTCLK (0x02 << 4) -#define S3C64XX_GPD1_I2S0_CDCLK (0x03 << 4) -#define S3C64XX_GPD1_AC97_nRESET (0x04 << 4) -#define S3C64XX_GPD1_EINT_G3_1 (0x07 << 4) - -#define S3C64XX_GPD2_PCM0_FSYNC (0x02 << 8) -#define S3C64XX_GPD2_I2S0_LRCLK (0x03 << 8) -#define S3C64XX_GPD2_AC97_SYNC (0x04 << 8) -#define S3C64XX_GPD2_EINT_G3_2 (0x07 << 8) - -#define S3C64XX_GPD3_PCM0_SIN (0x02 << 12) -#define S3C64XX_GPD3_I2S0_DI (0x03 << 12) -#define S3C64XX_GPD3_AC97_SDI (0x04 << 12) -#define S3C64XX_GPD3_EINT_G3_3 (0x07 << 12) - -#define S3C64XX_GPD4_PCM0_SOUT (0x02 << 16) -#define S3C64XX_GPD4_I2S0_D0 (0x03 << 16) -#define S3C64XX_GPD4_AC97_SDO (0x04 << 16) -#define S3C64XX_GPD4_EINT_G3_4 (0x07 << 16) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h deleted file mode 100644 index f057adb627d..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h +++ /dev/null @@ -1,44 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank E register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPECON (S3C64XX_GPE_BASE + 0x00) -#define S3C64XX_GPEDAT (S3C64XX_GPE_BASE + 0x04) -#define S3C64XX_GPEPUD (S3C64XX_GPE_BASE + 0x08) -#define S3C64XX_GPECONSLP (S3C64XX_GPE_BASE + 0x0c) -#define S3C64XX_GPEPUDSLP (S3C64XX_GPE_BASE + 0x10) - -#define S3C64XX_GPE_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPE_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPE_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPE0_PCM1_SCLK (0x02 << 0) -#define S3C64XX_GPE0_I2S1_CLK (0x03 << 0) -#define S3C64XX_GPE0_AC97_BITCLK (0x04 << 0) - -#define S3C64XX_GPE1_PCM1_EXTCLK (0x02 << 4) -#define S3C64XX_GPE1_I2S1_CDCLK (0x03 << 4) -#define S3C64XX_GPE1_AC97_nRESET (0x04 << 4) - -#define S3C64XX_GPE2_PCM1_FSYNC (0x02 << 8) -#define S3C64XX_GPE2_I2S1_LRCLK (0x03 << 8) -#define S3C64XX_GPE2_AC97_SYNC (0x04 << 8) - -#define S3C64XX_GPE3_PCM1_SIN (0x02 << 12) -#define S3C64XX_GPE3_I2S1_DI (0x03 << 12) -#define S3C64XX_GPE3_AC97_SDI (0x04 << 12) - -#define S3C64XX_GPE4_PCM1_SOUT (0x02 << 16) -#define S3C64XX_GPE4_I2S1_D0 (0x03 << 16) -#define S3C64XX_GPE4_AC97_SDO (0x04 << 16) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h deleted file mode 100644 index 62ab8f5e783..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h +++ /dev/null @@ -1,71 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank F register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPFCON (S3C64XX_GPF_BASE + 0x00) -#define S3C64XX_GPFDAT (S3C64XX_GPF_BASE + 0x04) -#define S3C64XX_GPFPUD (S3C64XX_GPF_BASE + 0x08) -#define S3C64XX_GPFCONSLP (S3C64XX_GPF_BASE + 0x0c) -#define S3C64XX_GPFPUDSLP (S3C64XX_GPF_BASE + 0x10) - -#define S3C64XX_GPF_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPF_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPF_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPF0_CAMIF_CLK (0x02 << 0) -#define S3C64XX_GPF0_EINT_G4_0 (0x03 << 0) - -#define S3C64XX_GPF1_CAMIF_HREF (0x02 << 2) -#define S3C64XX_GPF1_EINT_G4_1 (0x03 << 2) - -#define S3C64XX_GPF2_CAMIF_PCLK (0x02 << 4) -#define S3C64XX_GPF2_EINT_G4_2 (0x03 << 4) - -#define S3C64XX_GPF3_CAMIF_nRST (0x02 << 6) -#define S3C64XX_GPF3_EINT_G4_3 (0x03 << 6) - -#define S3C64XX_GPF4_CAMIF_VSYNC (0x02 << 8) -#define S3C64XX_GPF4_EINT_G4_4 (0x03 << 8) - -#define S3C64XX_GPF5_CAMIF_YDATA0 (0x02 << 10) -#define S3C64XX_GPF5_EINT_G4_5 (0x03 << 10) - -#define S3C64XX_GPF6_CAMIF_YDATA1 (0x02 << 12) -#define S3C64XX_GPF6_EINT_G4_6 (0x03 << 12) - -#define S3C64XX_GPF7_CAMIF_YDATA2 (0x02 << 14) -#define S3C64XX_GPF7_EINT_G4_7 (0x03 << 14) - -#define S3C64XX_GPF8_CAMIF_YDATA3 (0x02 << 16) -#define S3C64XX_GPF8_EINT_G4_8 (0x03 << 16) - -#define S3C64XX_GPF9_CAMIF_YDATA4 (0x02 << 18) -#define S3C64XX_GPF9_EINT_G4_9 (0x03 << 18) - -#define S3C64XX_GPF10_CAMIF_YDATA5 (0x02 << 20) -#define S3C64XX_GPF10_EINT_G4_10 (0x03 << 20) - -#define S3C64XX_GPF11_CAMIF_YDATA6 (0x02 << 22) -#define S3C64XX_GPF11_EINT_G4_11 (0x03 << 22) - -#define S3C64XX_GPF12_CAMIF_YDATA7 (0x02 << 24) -#define S3C64XX_GPF12_EINT_G4_12 (0x03 << 24) - -#define S3C64XX_GPF13_PWM_ECLK (0x02 << 26) -#define S3C64XX_GPF13_EINT_G4_13 (0x03 << 26) - -#define S3C64XX_GPF14_PWM_TOUT0 (0x02 << 28) -#define S3C64XX_GPF14_CLKOUT0 (0x03 << 28) - -#define S3C64XX_GPF15_PWM_TOUT1 (0x02 << 30) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h deleted file mode 100644 index b94954af159..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h +++ /dev/null @@ -1,42 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank G register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPGCON (S3C64XX_GPG_BASE + 0x00) -#define S3C64XX_GPGDAT (S3C64XX_GPG_BASE + 0x04) -#define S3C64XX_GPGPUD (S3C64XX_GPG_BASE + 0x08) -#define S3C64XX_GPGCONSLP (S3C64XX_GPG_BASE + 0x0c) -#define S3C64XX_GPGPUDSLP (S3C64XX_GPG_BASE + 0x10) - -#define S3C64XX_GPG_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPG_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPG_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPG0_MMC0_CLK (0x02 << 0) -#define S3C64XX_GPG0_EINT_G5_0 (0x07 << 0) - -#define S3C64XX_GPG1_MMC0_CMD (0x02 << 4) -#define S3C64XX_GPG1_EINT_G5_1 (0x07 << 4) - -#define S3C64XX_GPG2_MMC0_DATA0 (0x02 << 8) -#define S3C64XX_GPG2_EINT_G5_2 (0x07 << 8) - -#define S3C64XX_GPG3_MMC0_DATA1 (0x02 << 12) -#define S3C64XX_GPG3_EINT_G5_3 (0x07 << 12) - -#define S3C64XX_GPG4_MMC0_DATA2 (0x02 << 16) -#define S3C64XX_GPG4_EINT_G5_4 (0x07 << 16) - -#define S3C64XX_GPG5_MMC0_DATA3 (0x02 << 20) -#define S3C64XX_GPG5_EINT_G5_5 (0x07 << 20) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h deleted file mode 100644 index 5d75aaad865..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h +++ /dev/null @@ -1,74 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank H register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPHCON0 (S3C64XX_GPH_BASE + 0x00) -#define S3C64XX_GPHCON1 (S3C64XX_GPH_BASE + 0x04) -#define S3C64XX_GPHDAT (S3C64XX_GPH_BASE + 0x08) -#define S3C64XX_GPHPUD (S3C64XX_GPH_BASE + 0x0c) -#define S3C64XX_GPHCONSLP (S3C64XX_GPH_BASE + 0x10) -#define S3C64XX_GPHPUDSLP (S3C64XX_GPH_BASE + 0x14) - -#define S3C64XX_GPH_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPH_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPH_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPH0_MMC1_CLK (0x02 << 0) -#define S3C64XX_GPH0_KP_COL0 (0x04 << 0) -#define S3C64XX_GPH0_EINT_G6_0 (0x07 << 0) - -#define S3C64XX_GPH1_MMC1_CMD (0x02 << 4) -#define S3C64XX_GPH1_KP_COL1 (0x04 << 4) -#define S3C64XX_GPH1_EINT_G6_1 (0x07 << 4) - -#define S3C64XX_GPH2_MMC1_DATA0 (0x02 << 8) -#define S3C64XX_GPH2_KP_COL2 (0x04 << 8) -#define S3C64XX_GPH2_EINT_G6_2 (0x07 << 8) - -#define S3C64XX_GPH3_MMC1_DATA1 (0x02 << 12) -#define S3C64XX_GPH3_KP_COL3 (0x04 << 12) -#define S3C64XX_GPH3_EINT_G6_3 (0x07 << 12) - -#define S3C64XX_GPH4_MMC1_DATA2 (0x02 << 16) -#define S3C64XX_GPH4_KP_COL4 (0x04 << 16) -#define S3C64XX_GPH4_EINT_G6_4 (0x07 << 16) - -#define S3C64XX_GPH5_MMC1_DATA3 (0x02 << 20) -#define S3C64XX_GPH5_KP_COL5 (0x04 << 20) -#define S3C64XX_GPH5_EINT_G6_5 (0x07 << 20) - -#define S3C64XX_GPH6_MMC1_DATA4 (0x02 << 24) -#define S3C64XX_GPH6_MMC2_DATA0 (0x03 << 24) -#define S3C64XX_GPH6_KP_COL6 (0x04 << 24) -#define S3C64XX_GPH6_I2S_V40_BCLK (0x05 << 24) -#define S3C64XX_GPH6_ADDR_CF0 (0x06 << 24) -#define S3C64XX_GPH6_EINT_G6_6 (0x07 << 24) - -#define S3C64XX_GPH7_MMC1_DATA5 (0x02 << 28) -#define S3C64XX_GPH7_MMC2_DATA1 (0x03 << 28) -#define S3C64XX_GPH7_KP_COL7 (0x04 << 28) -#define S3C64XX_GPH7_I2S_V40_CDCLK (0x05 << 28) -#define S3C64XX_GPH7_ADDR_CF1 (0x06 << 28) -#define S3C64XX_GPH7_EINT_G6_7 (0x07 << 28) - -#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 0) -#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 0) -#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 0) -#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 0) -#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 0) - -#define S3C64XX_GPH9_OUTPUT (0x01 << 4) -#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 4) -#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 4) -#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 4) -#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 4) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h deleted file mode 100644 index 4ceaa6098bc..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank I register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPICON (S3C64XX_GPI_BASE + 0x00) -#define S3C64XX_GPIDAT (S3C64XX_GPI_BASE + 0x04) -#define S3C64XX_GPIPUD (S3C64XX_GPI_BASE + 0x08) -#define S3C64XX_GPICONSLP (S3C64XX_GPI_BASE + 0x0c) -#define S3C64XX_GPIPUDSLP (S3C64XX_GPI_BASE + 0x10) - -#define S3C64XX_GPI_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPI_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPI_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPI0_VD0 (0x02 << 0) -#define S3C64XX_GPI1_VD1 (0x02 << 2) -#define S3C64XX_GPI2_VD2 (0x02 << 4) -#define S3C64XX_GPI3_VD3 (0x02 << 6) -#define S3C64XX_GPI4_VD4 (0x02 << 8) -#define S3C64XX_GPI5_VD5 (0x02 << 10) -#define S3C64XX_GPI6_VD6 (0x02 << 12) -#define S3C64XX_GPI7_VD7 (0x02 << 14) -#define S3C64XX_GPI8_VD8 (0x02 << 16) -#define S3C64XX_GPI9_VD9 (0x02 << 18) -#define S3C64XX_GPI10_VD10 (0x02 << 20) -#define S3C64XX_GPI11_VD11 (0x02 << 22) -#define S3C64XX_GPI12_VD12 (0x02 << 24) -#define S3C64XX_GPI13_VD13 (0x02 << 26) -#define S3C64XX_GPI14_VD14 (0x02 << 28) -#define S3C64XX_GPI15_VD15 (0x02 << 30) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h deleted file mode 100644 index 6f25cd079a4..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank J register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPJCON (S3C64XX_GPJ_BASE + 0x00) -#define S3C64XX_GPJDAT (S3C64XX_GPJ_BASE + 0x04) -#define S3C64XX_GPJPUD (S3C64XX_GPJ_BASE + 0x08) -#define S3C64XX_GPJCONSLP (S3C64XX_GPJ_BASE + 0x0c) -#define S3C64XX_GPJPUDSLP (S3C64XX_GPJ_BASE + 0x10) - -#define S3C64XX_GPJ_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPJ_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPJ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPJ0_VD16 (0x02 << 0) -#define S3C64XX_GPJ1_VD17 (0x02 << 2) -#define S3C64XX_GPJ2_VD18 (0x02 << 4) -#define S3C64XX_GPJ3_VD19 (0x02 << 6) -#define S3C64XX_GPJ4_VD20 (0x02 << 8) -#define S3C64XX_GPJ5_VD21 (0x02 << 10) -#define S3C64XX_GPJ6_VD22 (0x02 << 12) -#define S3C64XX_GPJ7_VD23 (0x02 << 14) -#define S3C64XX_GPJ8_LCD_HSYNC (0x02 << 16) -#define S3C64XX_GPJ9_LCD_VSYNC (0x02 << 18) -#define S3C64XX_GPJ10_LCD_VDEN (0x02 << 20) -#define S3C64XX_GPJ11_LCD_VCLK (0x02 << 22) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h deleted file mode 100644 index d0aeda1cd9d..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h +++ /dev/null @@ -1,54 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank N register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00) -#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04) -#define S3C64XX_GPNPUD (S3C64XX_GPN_BASE + 0x08) - -#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPN_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPN0_EINT0 (0x02 << 0) -#define S3C64XX_GPN0_KP_ROW0 (0x03 << 0) - -#define S3C64XX_GPN1_EINT1 (0x02 << 2) -#define S3C64XX_GPN1_KP_ROW1 (0x03 << 2) - -#define S3C64XX_GPN2_EINT2 (0x02 << 4) -#define S3C64XX_GPN2_KP_ROW2 (0x03 << 4) - -#define S3C64XX_GPN3_EINT3 (0x02 << 6) -#define S3C64XX_GPN3_KP_ROW3 (0x03 << 6) - -#define S3C64XX_GPN4_EINT4 (0x02 << 8) -#define S3C64XX_GPN4_KP_ROW4 (0x03 << 8) - -#define S3C64XX_GPN5_EINT5 (0x02 << 10) -#define S3C64XX_GPN5_KP_ROW5 (0x03 << 10) - -#define S3C64XX_GPN6_EINT6 (0x02 << 12) -#define S3C64XX_GPN6_KP_ROW6 (0x03 << 12) - -#define S3C64XX_GPN7_EINT7 (0x02 << 14) -#define S3C64XX_GPN7_KP_ROW7 (0x03 << 14) - -#define S3C64XX_GPN8_EINT8 (0x02 << 16) -#define S3C64XX_GPN9_EINT9 (0x02 << 18) -#define S3C64XX_GPN10_EINT10 (0x02 << 20) -#define S3C64XX_GPN11_EINT11 (0x02 << 22) -#define S3C64XX_GPN12_EINT12 (0x02 << 24) -#define S3C64XX_GPN13_EINT13 (0x02 << 26) -#define S3C64XX_GPN14_EINT14 (0x02 << 28) -#define S3C64XX_GPN15_EINT15 (0x02 << 30) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h deleted file mode 100644 index 21868fa102d..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h +++ /dev/null @@ -1,70 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank O register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPOCON (S3C64XX_GPO_BASE + 0x00) -#define S3C64XX_GPODAT (S3C64XX_GPO_BASE + 0x04) -#define S3C64XX_GPOPUD (S3C64XX_GPO_BASE + 0x08) -#define S3C64XX_GPOCONSLP (S3C64XX_GPO_BASE + 0x0c) -#define S3C64XX_GPOPUDSLP (S3C64XX_GPO_BASE + 0x10) - -#define S3C64XX_GPO_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPO_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPO_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPO0_MEM0_nCS2 (0x02 << 0) -#define S3C64XX_GPO0_EINT_G7_0 (0x03 << 0) - -#define S3C64XX_GPO1_MEM0_nCS3 (0x02 << 2) -#define S3C64XX_GPO1_EINT_G7_1 (0x03 << 2) - -#define S3C64XX_GPO2_MEM0_nCS4 (0x02 << 4) -#define S3C64XX_GPO2_EINT_G7_2 (0x03 << 4) - -#define S3C64XX_GPO3_MEM0_nCS5 (0x02 << 6) -#define S3C64XX_GPO3_EINT_G7_3 (0x03 << 6) - -#define S3C64XX_GPO4_EINT_G7_4 (0x03 << 8) - -#define S3C64XX_GPO5_EINT_G7_5 (0x03 << 10) - -#define S3C64XX_GPO6_MEM0_ADDR6 (0x02 << 12) -#define S3C64XX_GPO6_EINT_G7_6 (0x03 << 12) - -#define S3C64XX_GPO7_MEM0_ADDR7 (0x02 << 14) -#define S3C64XX_GPO7_EINT_G7_7 (0x03 << 14) - -#define S3C64XX_GPO8_MEM0_ADDR8 (0x02 << 16) -#define S3C64XX_GPO8_EINT_G7_8 (0x03 << 16) - -#define S3C64XX_GPO9_MEM0_ADDR9 (0x02 << 18) -#define S3C64XX_GPO9_EINT_G7_9 (0x03 << 18) - -#define S3C64XX_GPO10_MEM0_ADDR10 (0x02 << 20) -#define S3C64XX_GPO10_EINT_G7_10 (0x03 << 20) - -#define S3C64XX_GPO11_MEM0_ADDR11 (0x02 << 22) -#define S3C64XX_GPO11_EINT_G7_11 (0x03 << 22) - -#define S3C64XX_GPO12_MEM0_ADDR12 (0x02 << 24) -#define S3C64XX_GPO12_EINT_G7_12 (0x03 << 24) - -#define S3C64XX_GPO13_MEM0_ADDR13 (0x02 << 26) -#define S3C64XX_GPO13_EINT_G7_13 (0x03 << 26) - -#define S3C64XX_GPO14_MEM0_ADDR14 (0x02 << 28) -#define S3C64XX_GPO14_EINT_G7_14 (0x03 << 28) - -#define S3C64XX_GPO15_MEM0_ADDR15 (0x02 << 30) -#define S3C64XX_GPO15_EINT_G7_15 (0x03 << 30) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h deleted file mode 100644 index 46bcfb63b8d..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h +++ /dev/null @@ -1,69 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank P register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPPCON (S3C64XX_GPP_BASE + 0x00) -#define S3C64XX_GPPDAT (S3C64XX_GPP_BASE + 0x04) -#define S3C64XX_GPPPUD (S3C64XX_GPP_BASE + 0x08) -#define S3C64XX_GPPCONSLP (S3C64XX_GPP_BASE + 0x0c) -#define S3C64XX_GPPPUDSLP (S3C64XX_GPP_BASE + 0x10) - -#define S3C64XX_GPP_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPP_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPP_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPP0_MEM0_ADDRV (0x02 << 0) -#define S3C64XX_GPP0_EINT_G8_0 (0x03 << 0) - -#define S3C64XX_GPP1_MEM0_SMCLK (0x02 << 2) -#define S3C64XX_GPP1_EINT_G8_1 (0x03 << 2) - -#define S3C64XX_GPP2_MEM0_nWAIT (0x02 << 4) -#define S3C64XX_GPP2_EINT_G8_2 (0x03 << 4) - -#define S3C64XX_GPP3_MEM0_RDY0_ALE (0x02 << 6) -#define S3C64XX_GPP3_EINT_G8_3 (0x03 << 6) - -#define S3C64XX_GPP4_MEM0_RDY1_CLE (0x02 << 8) -#define S3C64XX_GPP4_EINT_G8_4 (0x03 << 8) - -#define S3C64XX_GPP5_MEM0_INTsm0_FWE (0x02 << 10) -#define S3C64XX_GPP5_EINT_G8_5 (0x03 << 10) - -#define S3C64XX_GPP6_MEM0_(null) (0x02 << 12) -#define S3C64XX_GPP6_EINT_G8_6 (0x03 << 12) - -#define S3C64XX_GPP7_MEM0_INTsm1_FRE (0x02 << 14) -#define S3C64XX_GPP7_EINT_G8_7 (0x03 << 14) - -#define S3C64XX_GPP8_MEM0_RPn_RnB (0x02 << 16) -#define S3C64XX_GPP8_EINT_G8_8 (0x03 << 16) - -#define S3C64XX_GPP9_MEM0_ATA_RESET (0x02 << 18) -#define S3C64XX_GPP9_EINT_G8_9 (0x03 << 18) - -#define S3C64XX_GPP10_MEM0_ATA_INPACK (0x02 << 20) -#define S3C64XX_GPP10_EINT_G8_10 (0x03 << 20) - -#define S3C64XX_GPP11_MEM0_ATA_REG (0x02 << 22) -#define S3C64XX_GPP11_EINT_G8_11 (0x03 << 22) - -#define S3C64XX_GPP12_MEM0_ATA_WE (0x02 << 24) -#define S3C64XX_GPP12_EINT_G8_12 (0x03 << 24) - -#define S3C64XX_GPP13_MEM0_ATA_OE (0x02 << 26) -#define S3C64XX_GPP13_EINT_G8_13 (0x03 << 26) - -#define S3C64XX_GPP14_MEM0_ATA_CD (0x02 << 28) -#define S3C64XX_GPP14_EINT_G8_14 (0x03 << 28) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h deleted file mode 100644 index 1712223487b..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h +++ /dev/null @@ -1,46 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank Q register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPQCON (S3C64XX_GPQ_BASE + 0x00) -#define S3C64XX_GPQDAT (S3C64XX_GPQ_BASE + 0x04) -#define S3C64XX_GPQPUD (S3C64XX_GPQ_BASE + 0x08) -#define S3C64XX_GPQCONSLP (S3C64XX_GPQ_BASE + 0x0c) -#define S3C64XX_GPQPUDSLP (S3C64XX_GPQ_BASE + 0x10) - -#define S3C64XX_GPQ_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPQ_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPQ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPQ0_MEM0_ADDR18_RAS (0x02 << 0) -#define S3C64XX_GPQ0_EINT_G9_0 (0x03 << 0) - -#define S3C64XX_GPQ1_MEM0_ADDR19_CAS (0x02 << 2) -#define S3C64XX_GPQ1_EINT_G9_1 (0x03 << 2) - -#define S3C64XX_GPQ2_EINT_G9_2 (0x03 << 4) - -#define S3C64XX_GPQ3_EINT_G9_3 (0x03 << 6) - -#define S3C64XX_GPQ4_EINT_G9_4 (0x03 << 8) - -#define S3C64XX_GPQ5_EINT_G9_5 (0x03 << 10) - -#define S3C64XX_GPQ6_EINT_G9_6 (0x03 << 12) - -#define S3C64XX_GPQ7_MEM0_ADDR17_WENDMC (0x02 << 14) -#define S3C64XX_GPQ7_EINT_G9_7 (0x03 << 14) - -#define S3C64XX_GPQ8_MEM0_ADDR16_APDMC (0x02 << 16) -#define S3C64XX_GPQ8_EINT_G9_8 (0x03 << 16) - diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 686a4f270b1..2c0353a8090 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -50,7 +50,6 @@ #include <mach/hardware.h> #include <mach/regs-fb.h> #include <mach/map.h> -#include <mach/gpio-bank-f.h> #include <asm/irq.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 79412f735a8..bc1c470b7de 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -30,26 +30,18 @@ #include <mach/regs-gpio-memport.h> #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK -#include <mach/gpio-bank-n.h> - void s3c_pm_debug_smdkled(u32 set, u32 clear) { unsigned long flags; - u32 reg; + int i; local_irq_save(flags); - reg = __raw_readl(S3C64XX_GPNCON); - reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | - S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15)); - reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | - S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15); - __raw_writel(reg, S3C64XX_GPNCON); - - reg = __raw_readl(S3C64XX_GPNDAT); - reg &= ~(clear << 12); - reg |= set << 12; - __raw_writel(reg, S3C64XX_GPNDAT); - + for (i = 0; i < 4; i++) { + if (clear & (1 << i)) + gpio_set_value(S3C64XX_GPN(12 + i), 0); + if (set & (1 << i)) + gpio_set_value(S3C64XX_GPN(12 + i), 1); + } local_irq_restore(flags); } #endif @@ -187,6 +179,18 @@ static int s3c64xx_pm_init(void) pm_cpu_prep = s3c64xx_pm_prepare; pm_cpu_sleep = s3c64xx_cpu_suspend; pm_uart_udivslot = 1; + +#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK + gpio_request(S3C64XX_GPN(12), "DEBUG_LED0"); + gpio_request(S3C64XX_GPN(13), "DEBUG_LED1"); + gpio_request(S3C64XX_GPN(14), "DEBUG_LED2"); + gpio_request(S3C64XX_GPN(15), "DEBUG_LED3"); + gpio_direction_output(S3C64XX_GPN(12), 0); + gpio_direction_output(S3C64XX_GPN(13), 0); + gpio_direction_output(S3C64XX_GPN(14), 0); + gpio_direction_output(S3C64XX_GPN(15), 0); +#endif + return 0; } diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c index 406192a43c6..241af94a9e7 100644 --- a/arch/arm/mach-s3c64xx/setup-i2c0.c +++ b/arch/arm/mach-s3c64xx/setup-i2c0.c @@ -18,14 +18,11 @@ struct platform_device; /* don't need the contents */ -#include <mach/gpio-bank-b.h> #include <plat/iic.h> #include <plat/gpio-cfg.h> void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S3C64XX_GPB(5), S3C64XX_GPB5_I2C_SCL0); - s3c_gpio_cfgpin(S3C64XX_GPB(6), S3C64XX_GPB6_I2C_SDA0); - s3c_gpio_setpull(S3C64XX_GPB(5), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPB(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S3C64XX_GPB(5), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c index 1ee62c97cd7..3d13a961986 100644 --- a/arch/arm/mach-s3c64xx/setup-i2c1.c +++ b/arch/arm/mach-s3c64xx/setup-i2c1.c @@ -18,14 +18,11 @@ struct platform_device; /* don't need the contents */ -#include <mach/gpio-bank-b.h> #include <plat/iic.h> #include <plat/gpio-cfg.h> void s3c_i2c1_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S3C64XX_GPB(2), S3C64XX_GPB2_I2C_SCL1); - s3c_gpio_cfgpin(S3C64XX_GPB(3), S3C64XX_GPB3_I2C_SDA1); - s3c_gpio_setpull(S3C64XX_GPB(2), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPB(3), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S3C64XX_GPB(2), 2, + S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S index afe5a762f46..1f87732b232 100644 --- a/arch/arm/mach-s3c64xx/sleep.S +++ b/arch/arm/mach-s3c64xx/sleep.S @@ -20,7 +20,6 @@ #define S3C64XX_VA_GPIO (0x0) #include <mach/regs-gpio.h> -#include <mach/gpio-bank-n.h> #define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT)) @@ -68,6 +67,13 @@ ENTRY(s3c_cpu_resume) ldr r2, =LL_UART /* for debug */ #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK + +#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00) +#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04) + +#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) +#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) + /* Initialise the GPIO state if we are debugging via the SMDK LEDs, * as the uboot version supplied resets these to inputs during the * resume checks. diff --git a/arch/arm/mach-s5p6442/Kconfig b/arch/arm/mach-s5p6442/Kconfig deleted file mode 100644 index 33569e4007c..00000000000 --- a/arch/arm/mach-s5p6442/Kconfig +++ /dev/null @@ -1,25 +0,0 @@ -# arch/arm/mach-s5p6442/Kconfig -# -# Copyright (c) 2010 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -# Configuration options for the S5P6442 - -if ARCH_S5P6442 - -config CPU_S5P6442 - bool - select S3C_PL330_DMA - help - Enable S5P6442 CPU support - -config MACH_SMDK6442 - bool "SMDK6442" - select CPU_S5P6442 - select S3C_DEV_WDT - help - Machine support for Samsung SMDK6442 - -endif diff --git a/arch/arm/mach-s5p6442/Makefile b/arch/arm/mach-s5p6442/Makefile deleted file mode 100644 index 90a3d837341..00000000000 --- a/arch/arm/mach-s5p6442/Makefile +++ /dev/null @@ -1,24 +0,0 @@ -# arch/arm/mach-s5p6442/Makefile -# -# Copyright (c) 2010 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -# Core support for S5P6442 system - -obj-$(CONFIG_CPU_S5P6442) += cpu.o init.o clock.o dma.o -obj-$(CONFIG_CPU_S5P6442) += setup-i2c0.o - -# machine support - -obj-$(CONFIG_MACH_SMDK6442) += mach-smdk6442.o - -# device support -obj-y += dev-audio.o -obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o diff --git a/arch/arm/mach-s5p6442/Makefile.boot b/arch/arm/mach-s5p6442/Makefile.boot deleted file mode 100644 index ff90aa13bd6..00000000000 --- a/arch/arm/mach-s5p6442/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y := 0x20008000 -params_phys-y := 0x20000100 diff --git a/arch/arm/mach-s5p6442/clock.c b/arch/arm/mach-s5p6442/clock.c deleted file mode 100644 index fbbc7bede68..00000000000 --- a/arch/arm/mach-s5p6442/clock.c +++ /dev/null @@ -1,420 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/clock.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/map.h> - -#include <plat/cpu-freq.h> -#include <mach/regs-clock.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/s5p-clock.h> -#include <plat/clock-clksrc.h> -#include <plat/s5p6442.h> - -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - .id = -1, - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, -}; - -static struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - .id = -1, - }, - .sources = &clk_src_mpll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 }, -}; - -static struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - .id = -1, - }, - .sources = &clk_src_epll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 }, -}; - -/* Possible clock sources for ARM Mux */ -static struct clk *clk_src_arm_list[] = { - [1] = &clk_mout_apll.clk, - [2] = &clk_mout_mpll.clk, -}; - -static struct clksrc_sources clk_src_arm = { - .sources = clk_src_arm_list, - .nr_sources = ARRAY_SIZE(clk_src_arm_list), -}; - -static struct clksrc_clk clk_mout_arm = { - .clk = { - .name = "mout_arm", - .id = -1, - }, - .sources = &clk_src_arm, - .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 }, -}; - -static struct clk clk_dout_a2m = { - .name = "dout_a2m", - .id = -1, - .parent = &clk_mout_apll.clk, -}; - -/* Possible clock sources for D0 Mux */ -static struct clk *clk_src_d0_list[] = { - [1] = &clk_mout_mpll.clk, - [2] = &clk_dout_a2m, -}; - -static struct clksrc_sources clk_src_d0 = { - .sources = clk_src_d0_list, - .nr_sources = ARRAY_SIZE(clk_src_d0_list), -}; - -static struct clksrc_clk clk_mout_d0 = { - .clk = { - .name = "mout_d0", - .id = -1, - }, - .sources = &clk_src_d0, - .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 20, .size = 3 }, -}; - -static struct clk clk_dout_apll = { - .name = "dout_apll", - .id = -1, - .parent = &clk_mout_arm.clk, -}; - -/* Possible clock sources for D0SYNC Mux */ -static struct clk *clk_src_d0sync_list[] = { - [1] = &clk_mout_d0.clk, - [2] = &clk_dout_apll, -}; - -static struct clksrc_sources clk_src_d0sync = { - .sources = clk_src_d0sync_list, - .nr_sources = ARRAY_SIZE(clk_src_d0sync_list), -}; - -static struct clksrc_clk clk_mout_d0sync = { - .clk = { - .name = "mout_d0sync", - .id = -1, - }, - .sources = &clk_src_d0sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 }, -}; - -/* Possible clock sources for D1 Mux */ -static struct clk *clk_src_d1_list[] = { - [1] = &clk_mout_mpll.clk, - [2] = &clk_dout_a2m, -}; - -static struct clksrc_sources clk_src_d1 = { - .sources = clk_src_d1_list, - .nr_sources = ARRAY_SIZE(clk_src_d1_list), -}; - -static struct clksrc_clk clk_mout_d1 = { - .clk = { - .name = "mout_d1", - .id = -1, - }, - .sources = &clk_src_d1, - .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 24, .size = 3 }, -}; - -/* Possible clock sources for D1SYNC Mux */ -static struct clk *clk_src_d1sync_list[] = { - [1] = &clk_mout_d1.clk, - [2] = &clk_dout_apll, -}; - -static struct clksrc_sources clk_src_d1sync = { - .sources = clk_src_d1sync_list, - .nr_sources = ARRAY_SIZE(clk_src_d1sync_list), -}; - -static struct clksrc_clk clk_mout_d1sync = { - .clk = { - .name = "mout_d1sync", - .id = -1, - }, - .sources = &clk_src_d1sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 }, -}; - -static struct clk clk_hclkd0 = { - .name = "hclkd0", - .id = -1, - .parent = &clk_mout_d0sync.clk, -}; - -static struct clk clk_hclkd1 = { - .name = "hclkd1", - .id = -1, - .parent = &clk_mout_d1sync.clk, -}; - -static struct clk clk_pclkd0 = { - .name = "pclkd0", - .id = -1, - .parent = &clk_hclkd0, -}; - -static struct clk clk_pclkd1 = { - .name = "pclkd1", - .id = -1, - .parent = &clk_hclkd1, -}; - -int s5p6442_clk_ip0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable); -} - -int s5p6442_clk_ip3_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable); -} - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "dout_a2m", - .id = -1, - .parent = &clk_mout_apll.clk, - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 }, - }, { - .clk = { - .name = "dout_apll", - .id = -1, - .parent = &clk_mout_arm.clk, - }, - .sources = &clk_src_arm, - .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 3 }, - }, { - .clk = { - .name = "hclkd1", - .id = -1, - .parent = &clk_mout_d1sync.clk, - }, - .sources = &clk_src_d1sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 24, .size = 4 }, - }, { - .clk = { - .name = "hclkd0", - .id = -1, - .parent = &clk_mout_d0sync.clk, - }, - .sources = &clk_src_d0sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "pclkd0", - .id = -1, - .parent = &clk_hclkd0, - }, - .sources = &clk_src_d0sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 }, - }, { - .clk = { - .name = "pclkd1", - .id = -1, - .parent = &clk_hclkd1, - }, - .sources = &clk_src_d1sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 }, - } -}; - -/* Clock initialisation code */ -static struct clksrc_clk *init_parents[] = { - &clk_mout_apll, - &clk_mout_mpll, - &clk_mout_epll, - &clk_mout_arm, - &clk_mout_d0, - &clk_mout_d0sync, - &clk_mout_d1, - &clk_mout_d1sync, -}; - -void __init_or_cpufreq s5p6442_setup_clocks(void) -{ - struct clk *pclkd0_clk; - struct clk *pclkd1_clk; - - unsigned long xtal; - unsigned long arm; - unsigned long hclkd0 = 0; - unsigned long hclkd1 = 0; - unsigned long pclkd0 = 0; - unsigned long pclkd1 = 0; - - unsigned long apll; - unsigned long mpll; - unsigned long epll; - unsigned int ptr; - - printk(KERN_DEBUG "%s: registering clocks\n", __func__); - - xtal = clk_get_rate(&clk_xtal); - - printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - - apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508); - mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502); - epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500); - - printk(KERN_INFO "S5P6442: PLL settings, A=%ld, M=%ld, E=%ld", - apll, mpll, epll); - - clk_fout_apll.rate = apll; - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - - for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) - s3c_set_clksrc(init_parents[ptr], true); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_set_clksrc(&clksrcs[ptr], true); - - arm = clk_get_rate(&clk_dout_apll); - hclkd0 = clk_get_rate(&clk_hclkd0); - hclkd1 = clk_get_rate(&clk_hclkd1); - - pclkd0_clk = clk_get(NULL, "pclkd0"); - BUG_ON(IS_ERR(pclkd0_clk)); - - pclkd0 = clk_get_rate(pclkd0_clk); - clk_put(pclkd0_clk); - - pclkd1_clk = clk_get(NULL, "pclkd1"); - BUG_ON(IS_ERR(pclkd1_clk)); - - pclkd1 = clk_get_rate(pclkd1_clk); - clk_put(pclkd1_clk); - - printk(KERN_INFO "S5P6442: HCLKD0=%ld, HCLKD1=%ld, PCLKD0=%ld, PCLKD1=%ld\n", - hclkd0, hclkd1, pclkd0, pclkd1); - - /* For backward compatibility */ - clk_f.rate = arm; - clk_h.rate = hclkd1; - clk_p.rate = pclkd1; - - clk_pclkd0.rate = pclkd0; - clk_pclkd1.rate = pclkd1; -} - -static struct clk init_clocks_off[] = { - { - .name = "pdma", - .id = -1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip0_ctrl, - .ctrlbit = (1 << 3), - }, -}; - -static struct clk init_clocks[] = { - { - .name = "systimer", - .id = -1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<16), - }, { - .name = "uart", - .id = 0, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<17), - }, { - .name = "uart", - .id = 1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<18), - }, { - .name = "uart", - .id = 2, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<19), - }, { - .name = "watchdog", - .id = -1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1 << 22), - }, { - .name = "timers", - .id = -1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<23), - }, -}; - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_epll, - &clk_mout_apll.clk, - &clk_mout_mpll.clk, - &clk_mout_epll.clk, - &clk_mout_d0.clk, - &clk_mout_d0sync.clk, - &clk_mout_d1.clk, - &clk_mout_d1sync.clk, - &clk_hclkd0, - &clk_pclkd0, - &clk_hclkd1, - &clk_pclkd1, -}; - -void __init s5p6442_register_clocks(void) -{ - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - - s3c_pwmclk_init(); -} diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c deleted file mode 100644 index 842af86bda6..00000000000 --- a/arch/arm/mach-s5p6442/cpu.c +++ /dev/null @@ -1,143 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/cpu.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/sysdev.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> -#include <linux/sched.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/proc-fns.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <asm/irq.h> - -#include <plat/regs-serial.h> -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/clock.h> -#include <plat/s5p6442.h> - -/* Initial IO mappings */ - -static struct map_desc s5p6442_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSTIMER, - .pfn = __phys_to_pfn(S5P6442_PA_SYSTIMER), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GPIO, - .pfn = __phys_to_pfn(S5P6442_PA_GPIO), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC0, - .pfn = __phys_to_pfn(S5P6442_PA_VIC0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC1, - .pfn = __phys_to_pfn(S5P6442_PA_VIC1), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC2, - .pfn = __phys_to_pfn(S5P6442_PA_VIC2), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(S3C_PA_UART), - .length = SZ_512K, - .type = MT_DEVICE, - } -}; - -static void s5p6442_idle(void) -{ - if (!need_resched()) - cpu_do_idle(); - - local_irq_enable(); -} - -/* - * s5p6442_map_io - * - * register the standard cpu IO areas - */ - -void __init s5p6442_map_io(void) -{ - iotable_init(s5p6442_iodesc, ARRAY_SIZE(s5p6442_iodesc)); -} - -void __init s5p6442_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - s5p6442_register_clocks(); - s5p6442_setup_clocks(); -} - -void __init s5p6442_init_irq(void) -{ - /* S5P6442 supports 3 VIC */ - u32 vic[3]; - - /* VIC0, VIC1, and VIC2: some interrupt reserved */ - vic[0] = 0x7fefffff; - vic[1] = 0X7f389c81; - vic[2] = 0X1bbbcfff; - - s5p_init_irq(vic, ARRAY_SIZE(vic)); -} - -struct sysdev_class s5p6442_sysclass = { - .name = "s5p6442-core", -}; - -static struct sys_device s5p6442_sysdev = { - .cls = &s5p6442_sysclass, -}; - -static int __init s5p6442_core_init(void) -{ - return sysdev_class_register(&s5p6442_sysclass); -} - -core_initcall(s5p6442_core_init); - -int __init s5p6442_init(void) -{ - printk(KERN_INFO "S5P6442: Initializing architecture\n"); - - /* set idle function */ - pm_idle = s5p6442_idle; - - return sysdev_register(&s5p6442_sysdev); -} diff --git a/arch/arm/mach-s5p6442/dev-audio.c b/arch/arm/mach-s5p6442/dev-audio.c deleted file mode 100644 index 8719dc41fe3..00000000000 --- a/arch/arm/mach-s5p6442/dev-audio.c +++ /dev/null @@ -1,217 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/dev-audio.c - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <plat/gpio-cfg.h> -#include <plat/audio.h> - -#include <mach/map.h> -#include <mach/dma.h> -#include <mach/irqs.h> - -static int s5p6442_cfg_i2s(struct platform_device *pdev) -{ - unsigned int base; - - /* configure GPIO for i2s port */ - switch (pdev->id) { - case 1: - base = S5P6442_GPC1(0); - break; - - case 0: - base = S5P6442_GPC0(0); - break; - - default: - printk(KERN_ERR "Invalid Device %d\n", pdev->id); - return -EINVAL; - } - - s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2)); - return 0; -} - -static const char *rclksrc_v35[] = { - [0] = "busclk", - [1] = "i2sclk", -}; - -static struct s3c_audio_pdata i2sv35_pdata = { - .cfg_gpio = s5p6442_cfg_i2s, - .type = { - .i2s = { - .quirks = QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR, - .src_clk = rclksrc_v35, - }, - }, -}; - -static struct resource s5p6442_iis0_resource[] = { - [0] = { - .start = S5P6442_PA_I2S0, - .end = S5P6442_PA_I2S0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S0_TX, - .end = DMACH_I2S0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S0_RX, - .end = DMACH_I2S0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DMACH_I2S0S_TX, - .end = DMACH_I2S0S_TX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6442_device_iis0 = { - .name = "samsung-i2s", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6442_iis0_resource), - .resource = s5p6442_iis0_resource, - .dev = { - .platform_data = &i2sv35_pdata, - }, -}; - -static const char *rclksrc_v3[] = { - [0] = "iis", - [1] = "sclk_audio", -}; - -static struct s3c_audio_pdata i2sv3_pdata = { - .cfg_gpio = s5p6442_cfg_i2s, - .type = { - .i2s = { - .src_clk = rclksrc_v3, - }, - }, -}; - -static struct resource s5p6442_iis1_resource[] = { - [0] = { - .start = S5P6442_PA_I2S1, - .end = S5P6442_PA_I2S1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S1_TX, - .end = DMACH_I2S1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S1_RX, - .end = DMACH_I2S1_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6442_device_iis1 = { - .name = "samsung-i2s", - .id = 1, - .num_resources = ARRAY_SIZE(s5p6442_iis1_resource), - .resource = s5p6442_iis1_resource, - .dev = { - .platform_data = &i2sv3_pdata, - }, -}; - -/* PCM Controller platform_devices */ - -static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev) -{ - unsigned int base; - - switch (pdev->id) { - case 0: - base = S5P6442_GPC0(0); - break; - - case 1: - base = S5P6442_GPC1(0); - break; - - default: - printk(KERN_DEBUG "Invalid PCM Controller number!"); - return -EINVAL; - } - - s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3)); - return 0; -} - -static struct s3c_audio_pdata s3c_pcm_pdata = { - .cfg_gpio = s5p6442_pcm_cfg_gpio, -}; - -static struct resource s5p6442_pcm0_resource[] = { - [0] = { - .start = S5P6442_PA_PCM0, - .end = S5P6442_PA_PCM0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM0_TX, - .end = DMACH_PCM0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM0_RX, - .end = DMACH_PCM0_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6442_device_pcm0 = { - .name = "samsung-pcm", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6442_pcm0_resource), - .resource = s5p6442_pcm0_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; - -static struct resource s5p6442_pcm1_resource[] = { - [0] = { - .start = S5P6442_PA_PCM1, - .end = S5P6442_PA_PCM1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM1_TX, - .end = DMACH_PCM1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM1_RX, - .end = DMACH_PCM1_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6442_device_pcm1 = { - .name = "samsung-pcm", - .id = 1, - .num_resources = ARRAY_SIZE(s5p6442_pcm1_resource), - .resource = s5p6442_pcm1_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; diff --git a/arch/arm/mach-s5p6442/dev-spi.c b/arch/arm/mach-s5p6442/dev-spi.c deleted file mode 100644 index cce8c247070..00000000000 --- a/arch/arm/mach-s5p6442/dev-spi.c +++ /dev/null @@ -1,121 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/dev-spi.c - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <mach/dma.h> -#include <mach/map.h> -#include <mach/irqs.h> -#include <mach/spi-clocks.h> - -#include <plat/s3c64xx-spi.h> -#include <plat/gpio-cfg.h> - -static char *spi_src_clks[] = { - [S5P6442_SPI_SRCCLK_PCLK] = "pclk", - [S5P6442_SPI_SRCCLK_SCLK] = "spi_epll", -}; - -/* SPI Controller platform_devices */ - -/* Since we emulate multi-cs capability, we do not touch the CS. - * The emulated CS is toggled by board specific mechanism, as it can - * be either some immediate GPIO or some signal out of some other - * chip in between ... or some yet another way. - * We simply do not assume anything about CS. - */ -static int s5p6442_spi_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin(S5P6442_GPB(0), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5P6442_GPB(0), S3C_GPIO_PULL_UP); - s3c_gpio_cfgall_range(S5P6442_GPB(2), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - break; - - default: - dev_err(&pdev->dev, "Invalid SPI Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct resource s5p6442_spi0_resource[] = { - [0] = { - .start = S5P6442_PA_SPI, - .end = S5P6442_PA_SPI + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI0_TX, - .end = DMACH_SPI0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI0_RX, - .end = DMACH_SPI0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI0, - .end = IRQ_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s5p6442_spi0_pdata = { - .cfg_gpio = s5p6442_spi_cfg_gpio, - .fifo_lvl_mask = 0x1ff, - .rx_lvl_offset = 15, -}; - -static u64 spi_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5p6442_device_spi = { - .name = "s3c64xx-spi", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6442_spi0_resource), - .resource = s5p6442_spi0_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5p6442_spi0_pdata, - }, -}; - -void __init s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) -{ - struct s3c64xx_spi_info *pd; - - /* Reject invalid configuration */ - if (!num_cs || src_clk_nr < 0 - || src_clk_nr > S5P6442_SPI_SRCCLK_SCLK) { - printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); - return; - } - - switch (cntrlr) { - case 0: - pd = &s5p6442_spi0_pdata; - break; - default: - printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", - __func__, cntrlr); - return; - } - - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - pd->src_clk_name = spi_src_clks[src_clk_nr]; -} diff --git a/arch/arm/mach-s5p6442/dma.c b/arch/arm/mach-s5p6442/dma.c deleted file mode 100644 index 7dfb13654f8..00000000000 --- a/arch/arm/mach-s5p6442/dma.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> - -#include <plat/devs.h> -#include <plat/irqs.h> - -#include <mach/map.h> -#include <mach/irqs.h> - -#include <plat/s3c-pl330-pdata.h> - -static u64 dma_dmamask = DMA_BIT_MASK(32); - -static struct resource s5p6442_pdma_resource[] = { - [0] = { - .start = S5P6442_PA_PDMA, - .end = S5P6442_PA_PDMA + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PDMA, - .end = IRQ_PDMA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c_pl330_platdata s5p6442_pdma_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_MAX, - [7] = DMACH_MAX, - [8] = DMACH_MAX, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S0S_TX, - [12] = DMACH_I2S1_RX, - [13] = DMACH_I2S1_TX, - [14] = DMACH_MAX, - [15] = DMACH_MAX, - [16] = DMACH_SPI0_RX, - [17] = DMACH_SPI0_TX, - [18] = DMACH_MAX, - [19] = DMACH_MAX, - [20] = DMACH_PCM0_RX, - [21] = DMACH_PCM0_TX, - [22] = DMACH_PCM1_RX, - [23] = DMACH_PCM1_TX, - [24] = DMACH_MAX, - [25] = DMACH_MAX, - [26] = DMACH_MAX, - [27] = DMACH_MSM_REQ0, - [28] = DMACH_MSM_REQ1, - [29] = DMACH_MSM_REQ2, - [30] = DMACH_MSM_REQ3, - [31] = DMACH_MAX, - }, -}; - -static struct platform_device s5p6442_device_pdma = { - .name = "s3c-pl330", - .id = -1, - .num_resources = ARRAY_SIZE(s5p6442_pdma_resource), - .resource = s5p6442_pdma_resource, - .dev = { - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5p6442_pdma_pdata, - }, -}; - -static struct platform_device *s5p6442_dmacs[] __initdata = { - &s5p6442_device_pdma, -}; - -static int __init s5p6442_dma_init(void) -{ - platform_add_devices(s5p6442_dmacs, ARRAY_SIZE(s5p6442_dmacs)); - - return 0; -} -arch_initcall(s5p6442_dma_init); diff --git a/arch/arm/mach-s5p6442/include/mach/debug-macro.S b/arch/arm/mach-s5p6442/include/mach/debug-macro.S deleted file mode 100644 index e2213205d78..00000000000 --- a/arch/arm/mach-s5p6442/include/mach/debug-macro.S +++ /dev/null @@ -1,35 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/debug-macro.S - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* pull in the relevant register and map files. */ - -#include <mach/map.h> -#include <plat/regs-serial.h> - - .macro addruart, rp, rv - ldr \rp, = S3C_PA_UART - ldr \rv, = S3C_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) - add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) -#endif - .endm - -#define fifo_full fifo_full_s5pv210 -#define fifo_level fifo_level_s5pv210 - -/* include the reset of the code which will do the work, we're only - * compiling for a single cpu processor type so the default of s3c2440 - * will be fine with us. - */ - -#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s5p6442/include/mach/dma.h b/arch/arm/mach-s5p6442/include/mach/dma.h deleted file mode 100644 index 81209eb1409..00000000000 --- a/arch/arm/mach-s5p6442/include/mach/dma.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __MACH_DMA_H -#define __MACH_DMA_H - -/* This platform uses the common S3C DMA API driver for PL330 */ -#include <plat/s3c-dma-pl330.h> - -#endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/entry-macro.S b/arch/arm/mach-s5p6442/include/mach/entry-macro.S deleted file mode 100644 index 6d574edbf1a..00000000000 --- a/arch/arm/mach-s5p6442/include/mach/entry-macro.S +++ /dev/null @@ -1,48 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/entry-macro.S - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Low-level IRQ helper macros for the Samsung S5P6442 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <asm/hardware/vic.h> -#include <mach/map.h> -#include <plat/irqs.h> - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =VA_VIC0 - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - @ check the vic0 - mov \irqnr, # S5P_IRQ_OFFSET + 31 - ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] - teq \irqstat, #0 - - @ otherwise try vic1 - addeq \tmp, \base, #(VA_VIC1 - VA_VIC0) - addeq \irqnr, \irqnr, #32 - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - @ otherwise try vic2 - addeq \tmp, \base, #(VA_VIC2 - VA_VIC0) - addeq \irqnr, \irqnr, #32 - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - clzne \irqstat, \irqstat - subne \irqnr, \irqnr, \irqstat - .endm diff --git a/arch/arm/mach-s5p6442/include/mach/gpio.h b/arch/arm/mach-s5p6442/include/mach/gpio.h deleted file mode 100644 index b8715df2fda..00000000000 --- a/arch/arm/mach-s5p6442/include/mach/gpio.h +++ /dev/null @@ -1,123 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/gpio.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H __FILE__ - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -/* GPIO bank sizes */ -#define S5P6442_GPIO_A0_NR (8) -#define S5P6442_GPIO_A1_NR (2) -#define S5P6442_GPIO_B_NR (4) -#define S5P6442_GPIO_C0_NR (5) -#define S5P6442_GPIO_C1_NR (5) -#define S5P6442_GPIO_D0_NR (2) -#define S5P6442_GPIO_D1_NR (6) -#define S5P6442_GPIO_E0_NR (8) -#define S5P6442_GPIO_E1_NR (5) -#define S5P6442_GPIO_F0_NR (8) -#define S5P6442_GPIO_F1_NR (8) -#define S5P6442_GPIO_F2_NR (8) -#define S5P6442_GPIO_F3_NR (6) -#define S5P6442_GPIO_G0_NR (7) -#define S5P6442_GPIO_G1_NR (7) -#define S5P6442_GPIO_G2_NR (7) -#define S5P6442_GPIO_H0_NR (8) -#define S5P6442_GPIO_H1_NR (8) -#define S5P6442_GPIO_H2_NR (8) -#define S5P6442_GPIO_H3_NR (8) -#define S5P6442_GPIO_J0_NR (8) -#define S5P6442_GPIO_J1_NR (6) -#define S5P6442_GPIO_J2_NR (8) -#define S5P6442_GPIO_J3_NR (8) -#define S5P6442_GPIO_J4_NR (5) - -/* GPIO bank numbers */ - -/* CONFIG_S3C_GPIO_SPACE allows the user to select extra - * space for debugging purposes so that any accidental - * change from one gpio bank to another can be caught. -*/ - -#define S5P6442_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) - -enum s5p_gpio_number { - S5P6442_GPIO_A0_START = 0, - S5P6442_GPIO_A1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_A0), - S5P6442_GPIO_B_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_A1), - S5P6442_GPIO_C0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_B), - S5P6442_GPIO_C1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_C0), - S5P6442_GPIO_D0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_C1), - S5P6442_GPIO_D1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_D0), - S5P6442_GPIO_E0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_D1), - S5P6442_GPIO_E1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_E0), - S5P6442_GPIO_F0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_E1), - S5P6442_GPIO_F1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F0), - S5P6442_GPIO_F2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F1), - S5P6442_GPIO_F3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F2), - S5P6442_GPIO_G0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F3), - S5P6442_GPIO_G1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G0), - S5P6442_GPIO_G2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G1), - S5P6442_GPIO_H0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G2), - S5P6442_GPIO_H1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H0), - S5P6442_GPIO_H2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H1), - S5P6442_GPIO_H3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H2), - S5P6442_GPIO_J0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H3), - S5P6442_GPIO_J1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J0), - S5P6442_GPIO_J2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J1), - S5P6442_GPIO_J3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J2), - S5P6442_GPIO_J4_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J3), -}; - -/* S5P6442 GPIO number definitions. */ -#define S5P6442_GPA0(_nr) (S5P6442_GPIO_A0_START + (_nr)) -#define S5P6442_GPA1(_nr) (S5P6442_GPIO_A1_START + (_nr)) -#define S5P6442_GPB(_nr) (S5P6442_GPIO_B_START + (_nr)) -#define S5P6442_GPC0(_nr) (S5P6442_GPIO_C0_START + (_nr)) -#define S5P6442_GPC1(_nr) (S5P6442_GPIO_C1_START + (_nr)) -#define S5P6442_GPD0(_nr) (S5P6442_GPIO_D0_START + (_nr)) -#define S5P6442_GPD1(_nr) (S5P6442_GPIO_D1_START + (_nr)) -#define S5P6442_GPE0(_nr) (S5P6442_GPIO_E0_START + (_nr)) -#define S5P6442_GPE1(_nr) (S5P6442_GPIO_E1_START + (_nr)) -#define S5P6442_GPF0(_nr) (S5P6442_GPIO_F0_START + (_nr)) -#define S5P6442_GPF1(_nr) (S5P6442_GPIO_F1_START + (_nr)) -#define S5P6442_GPF2(_nr) (S5P6442_GPIO_F2_START + (_nr)) -#define S5P6442_GPF3(_nr) (S5P6442_GPIO_F3_START + (_nr)) -#define S5P6442_GPG0(_nr) (S5P6442_GPIO_G0_START + (_nr)) -#define S5P6442_GPG1(_nr) (S5P6442_GPIO_G1_START + (_nr)) -#define S5P6442_GPG2(_nr) (S5P6442_GPIO_G2_START + (_nr)) -#define S5P6442_GPH0(_nr) (S5P6442_GPIO_H0_START + (_nr)) -#define S5P6442_GPH1(_nr) (S5P6442_GPIO_H1_START + (_nr)) -#define S5P6442_GPH2(_nr) (S5P6442_GPIO_H2_START + (_nr)) -#define S5P6442_GPH3(_nr) (S5P6442_GPIO_H3_START + (_nr)) -#define S5P6442_GPJ0(_nr) (S5P6442_GPIO_J0_START + (_nr)) -#define S5P6442_GPJ1(_nr) (S5P6442_GPIO_J1_START + (_nr)) -#define S5P6442_GPJ2(_nr) (S5P6442_GPIO_J2_START + (_nr)) -#define S5P6442_GPJ3(_nr) (S5P6442_GPIO_J3_START + (_nr)) -#define S5P6442_GPJ4(_nr) (S5P6442_GPIO_J4_START + (_nr)) - -/* the end of the S5P6442 specific gpios */ -#define S5P6442_GPIO_END (S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + 1) -#define S3C_GPIO_END S5P6442_GPIO_END - -/* define the number of gpios we need to the one after the GPJ4() range */ -#define ARCH_NR_GPIOS (S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + \ - CONFIG_SAMSUNG_GPIO_EXTRA + 1) - -#include <asm-generic/gpio.h> - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/hardware.h b/arch/arm/mach-s5p6442/include/mach/hardware.h deleted file mode 100644 index 8cd7b67b49d..00000000000 --- a/arch/arm/mach-s5p6442/include/mach/hardware.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/hardware.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Hardware support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H __FILE__ - -/* currently nothing here, placeholder */ - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/io.h b/arch/arm/mach-s5p6442/include/mach/io.h deleted file mode 100644 index 5d2195ad0b6..00000000000 --- a/arch/arm/mach-s5p6442/include/mach/io.h +++ /dev/null @@ -1,17 +0,0 @@ -/* arch/arm/mach-s5p6442/include/mach/io.h - * - * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org> - * - * Default IO routines for S5P6442 - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* No current ISA/PCI bus support. */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#define IO_SPACE_LIMIT (0xFFFFFFFF) - -#endif diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h deleted file mode 100644 index 3fbc6c3ad2d..00000000000 --- a/arch/arm/mach-s5p6442/include/mach/irqs.h +++ /dev/null @@ -1,87 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/irqs.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - IRQ definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H __FILE__ - -#include <plat/irqs.h> - -/* VIC0 */ -#define IRQ_EINT16_31 S5P_IRQ_VIC0(16) -#define IRQ_BATF S5P_IRQ_VIC0(17) -#define IRQ_MDMA S5P_IRQ_VIC0(18) -#define IRQ_PDMA S5P_IRQ_VIC0(19) -#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21) -#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22) -#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23) -#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24) -#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25) -#define IRQ_SYSTIMER S5P_IRQ_VIC0(26) -#define IRQ_WDT S5P_IRQ_VIC0(27) -#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28) -#define IRQ_RTC_TIC S5P_IRQ_VIC0(29) -#define IRQ_GPIOINT S5P_IRQ_VIC0(30) - -/* VIC1 */ -#define IRQ_PMU S5P_IRQ_VIC1(0) -#define IRQ_ONENAND S5P_IRQ_VIC1(7) -#define IRQ_UART0 S5P_IRQ_VIC1(10) -#define IRQ_UART1 S5P_IRQ_VIC1(11) -#define IRQ_UART2 S5P_IRQ_VIC1(12) -#define IRQ_SPI0 S5P_IRQ_VIC1(15) -#define IRQ_IIC S5P_IRQ_VIC1(19) -#define IRQ_IIC1 S5P_IRQ_VIC1(20) -#define IRQ_IIC2 S5P_IRQ_VIC1(21) -#define IRQ_OTG S5P_IRQ_VIC1(24) -#define IRQ_MSM S5P_IRQ_VIC1(25) -#define IRQ_HSMMC0 S5P_IRQ_VIC1(26) -#define IRQ_HSMMC1 S5P_IRQ_VIC1(27) -#define IRQ_HSMMC2 S5P_IRQ_VIC1(28) -#define IRQ_COMMRX S5P_IRQ_VIC1(29) -#define IRQ_COMMTX S5P_IRQ_VIC1(30) - -/* VIC2 */ -#define IRQ_LCD0 S5P_IRQ_VIC2(0) -#define IRQ_LCD1 S5P_IRQ_VIC2(1) -#define IRQ_LCD2 S5P_IRQ_VIC2(2) -#define IRQ_LCD3 S5P_IRQ_VIC2(3) -#define IRQ_ROTATOR S5P_IRQ_VIC2(4) -#define IRQ_FIMC0 S5P_IRQ_VIC2(5) -#define IRQ_FIMC1 S5P_IRQ_VIC2(6) -#define IRQ_FIMC2 S5P_IRQ_VIC2(7) -#define IRQ_JPEG S5P_IRQ_VIC2(8) -#define IRQ_3D S5P_IRQ_VIC2(10) -#define IRQ_Mixer S5P_IRQ_VIC2(11) -#define IRQ_MFC S5P_IRQ_VIC2(14) -#define IRQ_TVENC S5P_IRQ_VIC2(15) -#define IRQ_I2S0 S5P_IRQ_VIC2(16) -#define IRQ_I2S1 S5P_IRQ_VIC2(17) -#define IRQ_RP S5P_IRQ_VIC2(19) -#define IRQ_PCM0 S5P_IRQ_VIC2(20) -#define IRQ_PCM1 S5P_IRQ_VIC2(21) -#define IRQ_ADC S5P_IRQ_VIC2(23) -#define IRQ_PENDN S5P_IRQ_VIC2(24) -#define IRQ_KEYPAD S5P_IRQ_VIC2(25) -#define IRQ_SSS_INT S5P_IRQ_VIC2(27) -#define IRQ_SSS_HASH S5P_IRQ_VIC2(28) -#define IRQ_VIC_END S5P_IRQ_VIC2(31) - -#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1) - -#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) -#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE) - -/* Set the default NR_IRQS */ - -#define NR_IRQS (IRQ_EINT(31) + 1) - -#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h deleted file mode 100644 index 058dab4482a..00000000000 --- a/arch/arm/mach-s5p6442/include/mach/map.h +++ /dev/null @@ -1,76 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/map.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H __FILE__ - -#include <plat/map-base.h> -#include <plat/map-s5p.h> - -#define S5P6442_PA_SDRAM 0x20000000 - -#define S5P6442_PA_I2S0 0xC0B00000 -#define S5P6442_PA_I2S1 0xF2200000 - -#define S5P6442_PA_CHIPID 0xE0000000 - -#define S5P6442_PA_SYSCON 0xE0100000 - -#define S5P6442_PA_GPIO 0xE0200000 - -#define S5P6442_PA_VIC0 0xE4000000 -#define S5P6442_PA_VIC1 0xE4100000 -#define S5P6442_PA_VIC2 0xE4200000 - -#define S5P6442_PA_SROMC 0xE7000000 - -#define S5P6442_PA_MDMA 0xE8000000 -#define S5P6442_PA_PDMA 0xE9000000 - -#define S5P6442_PA_TIMER 0xEA000000 - -#define S5P6442_PA_SYSTIMER 0xEA100000 - -#define S5P6442_PA_WATCHDOG 0xEA200000 - -#define S5P6442_PA_UART 0xEC000000 - -#define S5P6442_PA_IIC0 0xEC100000 - -#define S5P6442_PA_SPI 0xEC300000 - -#define S5P6442_PA_PCM0 0xF2400000 -#define S5P6442_PA_PCM1 0xF2500000 - -/* Compatibiltiy Defines */ - -#define S3C_PA_IIC S5P6442_PA_IIC0 -#define S3C_PA_WDT S5P6442_PA_WATCHDOG - -#define S5P_PA_CHIPID S5P6442_PA_CHIPID -#define S5P_PA_SDRAM S5P6442_PA_SDRAM -#define S5P_PA_SROMC S5P6442_PA_SROMC -#define S5P_PA_SYSCON S5P6442_PA_SYSCON -#define S5P_PA_TIMER S5P6442_PA_TIMER - -/* UART */ - -#define S3C_PA_UART S5P6442_PA_UART - -#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) -#define S5P_PA_UART0 S5P_PA_UART(0) -#define S5P_PA_UART1 S5P_PA_UART(1) -#define S5P_PA_UART2 S5P_PA_UART(2) - -#define S5P_SZ_UART SZ_256 - -#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/memory.h b/arch/arm/mach-s5p6442/include/mach/memory.h deleted file mode 100644 index cfe259dded3..00000000000 --- a/arch/arm/mach-s5p6442/include/mach/memory.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/memory.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Memory definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x20000000) -#define CONSISTENT_DMA_SIZE SZ_8M - -#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/pwm-clock.h b/arch/arm/mach-s5p6442/include/mach/pwm-clock.h deleted file mode 100644 index 2724b37def3..00000000000 --- a/arch/arm/mach-s5p6442/include/mach/pwm-clock.h +++ /dev/null @@ -1,70 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/pwm-clock.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h - * - * S5P6442 - pwm clock and timer support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_PWMCLK_H -#define __ASM_ARCH_PWMCLK_H __FILE__ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @tcfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return tcfg == S3C64XX_TCFG1_MUX_TCLK; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << tcfg1; -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 1; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div); -} - -#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK - -#endif /* __ASM_ARCH_PWMCLK_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/regs-clock.h b/arch/arm/mach-s5p6442/include/mach/regs-clock.h deleted file mode 100644 index 00828a33699..00000000000 --- a/arch/arm/mach-s5p6442/include/mach/regs-clock.h +++ /dev/null @@ -1,104 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/regs-clock.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_CLOCK_H -#define __ASM_ARCH_REGS_CLOCK_H __FILE__ - -#include <mach/map.h> - -#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) - -#define S5P_APLL_LOCK S5P_CLKREG(0x00) -#define S5P_MPLL_LOCK S5P_CLKREG(0x08) -#define S5P_EPLL_LOCK S5P_CLKREG(0x10) -#define S5P_VPLL_LOCK S5P_CLKREG(0x20) - -#define S5P_APLL_CON S5P_CLKREG(0x100) -#define S5P_MPLL_CON S5P_CLKREG(0x108) -#define S5P_EPLL_CON S5P_CLKREG(0x110) -#define S5P_VPLL_CON S5P_CLKREG(0x120) - -#define S5P_CLK_SRC0 S5P_CLKREG(0x200) -#define S5P_CLK_SRC1 S5P_CLKREG(0x204) -#define S5P_CLK_SRC2 S5P_CLKREG(0x208) -#define S5P_CLK_SRC3 S5P_CLKREG(0x20C) -#define S5P_CLK_SRC4 S5P_CLKREG(0x210) -#define S5P_CLK_SRC5 S5P_CLKREG(0x214) -#define S5P_CLK_SRC6 S5P_CLKREG(0x218) - -#define S5P_CLK_SRC_MASK0 S5P_CLKREG(0x280) -#define S5P_CLK_SRC_MASK1 S5P_CLKREG(0x284) - -#define S5P_CLK_DIV0 S5P_CLKREG(0x300) -#define S5P_CLK_DIV1 S5P_CLKREG(0x304) -#define S5P_CLK_DIV2 S5P_CLKREG(0x308) -#define S5P_CLK_DIV3 S5P_CLKREG(0x30C) -#define S5P_CLK_DIV4 S5P_CLKREG(0x310) -#define S5P_CLK_DIV5 S5P_CLKREG(0x314) -#define S5P_CLK_DIV6 S5P_CLKREG(0x318) - -#define S5P_CLKGATE_IP0 S5P_CLKREG(0x460) -#define S5P_CLKGATE_IP3 S5P_CLKREG(0x46C) - -/* CLK_OUT */ -#define S5P_CLK_OUT_SHIFT (12) -#define S5P_CLK_OUT_MASK (0x1F << S5P_CLK_OUT_SHIFT) -#define S5P_CLK_OUT S5P_CLKREG(0x500) - -#define S5P_CLK_DIV_STAT0 S5P_CLKREG(0x1000) -#define S5P_CLK_DIV_STAT1 S5P_CLKREG(0x1004) - -#define S5P_CLK_MUX_STAT0 S5P_CLKREG(0x1100) -#define S5P_CLK_MUX_STAT1 S5P_CLKREG(0x1104) - -#define S5P_MDNIE_SEL S5P_CLKREG(0x7008) - -/* Register Bit definition */ -#define S5P_EPLL_EN (1<<31) -#define S5P_EPLL_MASK 0xffffffff -#define S5P_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s))) - -/* CLKDIV0 */ -#define S5P_CLKDIV0_APLL_SHIFT (0) -#define S5P_CLKDIV0_APLL_MASK (0x7 << S5P_CLKDIV0_APLL_SHIFT) -#define S5P_CLKDIV0_A2M_SHIFT (4) -#define S5P_CLKDIV0_A2M_MASK (0x7 << S5P_CLKDIV0_A2M_SHIFT) -#define S5P_CLKDIV0_D0CLK_SHIFT (16) -#define S5P_CLKDIV0_D0CLK_MASK (0xF << S5P_CLKDIV0_D0CLK_SHIFT) -#define S5P_CLKDIV0_P0CLK_SHIFT (20) -#define S5P_CLKDIV0_P0CLK_MASK (0x7 << S5P_CLKDIV0_P0CLK_SHIFT) -#define S5P_CLKDIV0_D1CLK_SHIFT (24) -#define S5P_CLKDIV0_D1CLK_MASK (0xF << S5P_CLKDIV0_D1CLK_SHIFT) -#define S5P_CLKDIV0_P1CLK_SHIFT (28) -#define S5P_CLKDIV0_P1CLK_MASK (0x7 << S5P_CLKDIV0_P1CLK_SHIFT) - -/* Clock MUX status Registers */ -#define S5P_CLK_MUX_STAT0_APLL_SHIFT (0) -#define S5P_CLK_MUX_STAT0_APLL_MASK (0x7 << S5P_CLK_MUX_STAT0_APLL_SHIFT) -#define S5P_CLK_MUX_STAT0_MPLL_SHIFT (4) -#define S5P_CLK_MUX_STAT0_MPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_MPLL_SHIFT) -#define S5P_CLK_MUX_STAT0_EPLL_SHIFT (8) -#define S5P_CLK_MUX_STAT0_EPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_EPLL_SHIFT) -#define S5P_CLK_MUX_STAT0_VPLL_SHIFT (12) -#define S5P_CLK_MUX_STAT0_VPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_VPLL_SHIFT) -#define S5P_CLK_MUX_STAT0_MUXARM_SHIFT (16) -#define S5P_CLK_MUX_STAT0_MUXARM_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXARM_SHIFT) -#define S5P_CLK_MUX_STAT0_MUXD0_SHIFT (20) -#define S5P_CLK_MUX_STAT0_MUXD0_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXD0_SHIFT) -#define S5P_CLK_MUX_STAT0_MUXD1_SHIFT (24) -#define S5P_CLK_MUX_STAT0_MUXD1_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXD1_SHIFT) -#define S5P_CLK_MUX_STAT1_D1SYNC_SHIFT (24) -#define S5P_CLK_MUX_STAT1_D1SYNC_MASK (0x7 << S5P_CLK_MUX_STAT1_D1SYNC_SHIFT) -#define S5P_CLK_MUX_STAT1_D0SYNC_SHIFT (28) -#define S5P_CLK_MUX_STAT1_D0SYNC_MASK (0x7 << S5P_CLK_MUX_STAT1_D0SYNC_SHIFT) - -#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/regs-irq.h b/arch/arm/mach-s5p6442/include/mach/regs-irq.h deleted file mode 100644 index 73782b52a83..00000000000 --- a/arch/arm/mach-s5p6442/include/mach/regs-irq.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/regs-irq.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - IRQ register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_IRQ_H -#define __ASM_ARCH_REGS_IRQ_H __FILE__ - -#include <asm/hardware/vic.h> -#include <mach/map.h> - -#endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/spi-clocks.h b/arch/arm/mach-s5p6442/include/mach/spi-clocks.h deleted file mode 100644 index 7fd88205a97..00000000000 --- a/arch/arm/mach-s5p6442/include/mach/spi-clocks.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/spi-clocks.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __S5P6442_PLAT_SPI_CLKS_H -#define __S5P6442_PLAT_SPI_CLKS_H __FILE__ - -#define S5P6442_SPI_SRCCLK_PCLK 0 -#define S5P6442_SPI_SRCCLK_SCLK 1 - -#endif /* __S5P6442_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/system.h b/arch/arm/mach-s5p6442/include/mach/system.h deleted file mode 100644 index c30c1cc1b97..00000000000 --- a/arch/arm/mach-s5p6442/include/mach/system.h +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/system.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - system support header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -#include <plat/system-reset.h> - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/tick.h b/arch/arm/mach-s5p6442/include/mach/tick.h deleted file mode 100644 index e1d4cabf829..00000000000 --- a/arch/arm/mach-s5p6442/include/mach/tick.h +++ /dev/null @@ -1,26 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/tick.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s3c6400/include/mach/tick.h - * - * S5P6442 - Timer tick support definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TICK_H -#define __ASM_ARCH_TICK_H __FILE__ - -static inline u32 s3c24xx_ostimer_pending(void) -{ - u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); - return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0))); -} - -#define TICK_MAX (0xffffffff) - -#endif /* __ASM_ARCH_TICK_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/timex.h b/arch/arm/mach-s5p6442/include/mach/timex.h deleted file mode 100644 index ff8f2fcadeb..00000000000 --- a/arch/arm/mach-s5p6442/include/mach/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s5p6442/include/mach/timex.h - * - * Copyright (c) 2003-2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S5P6442 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/uncompress.h b/arch/arm/mach-s5p6442/include/mach/uncompress.h deleted file mode 100644 index 5ac7cbeeb98..00000000000 --- a/arch/arm/mach-s5p6442/include/mach/uncompress.h +++ /dev/null @@ -1,24 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/uncompress.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - uncompress code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <mach/map.h> -#include <plat/uncompress.h> - -static void arch_detect_cpu(void) -{ - /* we do not need to do any cpu detection here at the moment. */ -} - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/vmalloc.h b/arch/arm/mach-s5p6442/include/mach/vmalloc.h deleted file mode 100644 index 4aa55e55ac4..00000000000 --- a/arch/arm/mach-s5p6442/include/mach/vmalloc.h +++ /dev/null @@ -1,17 +0,0 @@ -/* arch/arm/mach-s5p6442/include/mach/vmalloc.h - * - * Copyright 2010 Ben Dooks <ben-linux@fluff.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S5P6442 vmalloc definition -*/ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END 0xF6000000UL - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s5p6442/init.c b/arch/arm/mach-s5p6442/init.c deleted file mode 100644 index 1874bdb71e1..00000000000 --- a/arch/arm/mach-s5p6442/init.c +++ /dev/null @@ -1,44 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/s5p6442-init.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/serial_core.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/s5p6442.h> -#include <plat/regs-serial.h> - -static struct s3c24xx_uart_clksrc s5p6442_serial_clocks[] = { - [0] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, -}; - -/* uart registration process */ -void __init s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - struct s3c2410_uartcfg *tcfg = cfg; - u32 ucnt; - - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { - if (!tcfg->clocks) { - tcfg->clocks = s5p6442_serial_clocks; - tcfg->clocks_size = ARRAY_SIZE(s5p6442_serial_clocks); - } - } - - s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); -} diff --git a/arch/arm/mach-s5p6442/mach-smdk6442.c b/arch/arm/mach-s5p6442/mach-smdk6442.c deleted file mode 100644 index eaf6b9c489f..00000000000 --- a/arch/arm/mach-s5p6442/mach-smdk6442.c +++ /dev/null @@ -1,102 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/mach-smdk6442.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/i2c.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/setup.h> -#include <asm/mach-types.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/regs-serial.h> -#include <plat/s5p6442.h> -#include <plat/devs.h> -#include <plat/cpu.h> -#include <plat/iic.h> - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define SMDK6442_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDK6442_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDK6442_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDK6442_UCON_DEFAULT, - .ulcon = SMDK6442_ULCON_DEFAULT, - .ufcon = SMDK6442_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDK6442_UCON_DEFAULT, - .ulcon = SMDK6442_ULCON_DEFAULT, - .ufcon = SMDK6442_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDK6442_UCON_DEFAULT, - .ulcon = SMDK6442_ULCON_DEFAULT, - .ufcon = SMDK6442_UFCON_DEFAULT, - }, -}; - -static struct platform_device *smdk6442_devices[] __initdata = { - &s3c_device_i2c0, - &samsung_asoc_dma, - &s5p6442_device_iis0, - &s3c_device_wdt, -}; - -static struct i2c_board_info smdk6442_i2c_devs0[] __initdata = { - { I2C_BOARD_INFO("wm8580", 0x1b), }, -}; - -static void __init smdk6442_map_io(void) -{ - s5p_init_io(NULL, 0, S5P_VA_CHIPID); - s3c24xx_init_clocks(12000000); - s3c24xx_init_uarts(smdk6442_uartcfgs, ARRAY_SIZE(smdk6442_uartcfgs)); -} - -static void __init smdk6442_machine_init(void) -{ - s3c_i2c0_set_platdata(NULL); - i2c_register_board_info(0, smdk6442_i2c_devs0, - ARRAY_SIZE(smdk6442_i2c_devs0)); - platform_add_devices(smdk6442_devices, ARRAY_SIZE(smdk6442_devices)); -} - -MACHINE_START(SMDK6442, "SMDK6442") - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, - .init_irq = s5p6442_init_irq, - .map_io = smdk6442_map_io, - .init_machine = smdk6442_machine_init, - .timer = &s3c24xx_timer, -MACHINE_END diff --git a/arch/arm/mach-s5p6442/setup-i2c0.c b/arch/arm/mach-s5p6442/setup-i2c0.c deleted file mode 100644 index aad85656b0c..00000000000 --- a/arch/arm/mach-s5p6442/setup-i2c0.c +++ /dev/null @@ -1,28 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/setup-i2c0.c - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * I2C0 GPIO configuration. - * - * Based on plat-s3c64xx/setup-i2c0.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/gpio.h> - -struct platform_device; /* don't need the contents */ - -#include <plat/gpio-cfg.h> -#include <plat/iic.h> - -void s3c_i2c0_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5P6442_GPD1(0), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile index eecab57d2e5..a5e6e608b49 100644 --- a/arch/arm/mach-s5pc100/Makefile +++ b/arch/arm/mach-s5pc100/Makefile @@ -11,7 +11,7 @@ obj- := # Core support for S5PC100 system -obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o gpiolib.o +obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o obj-$(CONFIG_CPU_S5PC100) += setup-i2c0.o obj-$(CONFIG_CPU_S5PC100) += dma.o diff --git a/arch/arm/mach-s5pc100/gpiolib.c b/arch/arm/mach-s5pc100/gpiolib.c deleted file mode 100644 index 2842394b28b..00000000000 --- a/arch/arm/mach-s5pc100/gpiolib.c +++ /dev/null @@ -1,355 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/gpiolib.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright 2009 Samsung Electronics Co - * Kyungmin Park <kyungmin.park@samsung.com> - * - * S5PC100 - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <mach/map.h> -#include <mach/regs-gpio.h> - -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> - -/* S5PC100 GPIO bank summary: - * - * Bank GPIOs Style INT Type - * A0 8 4Bit GPIO_INT0 - * A1 5 4Bit GPIO_INT1 - * B 8 4Bit GPIO_INT2 - * C 5 4Bit GPIO_INT3 - * D 7 4Bit GPIO_INT4 - * E0 8 4Bit GPIO_INT5 - * E1 6 4Bit GPIO_INT6 - * F0 8 4Bit GPIO_INT7 - * F1 8 4Bit GPIO_INT8 - * F2 8 4Bit GPIO_INT9 - * F3 4 4Bit GPIO_INT10 - * G0 8 4Bit GPIO_INT11 - * G1 3 4Bit GPIO_INT12 - * G2 7 4Bit GPIO_INT13 - * G3 7 4Bit GPIO_INT14 - * H0 8 4Bit WKUP_INT - * H1 8 4Bit WKUP_INT - * H2 8 4Bit WKUP_INT - * H3 8 4Bit WKUP_INT - * I 8 4Bit GPIO_INT15 - * J0 8 4Bit GPIO_INT16 - * J1 5 4Bit GPIO_INT17 - * J2 8 4Bit GPIO_INT18 - * J3 8 4Bit GPIO_INT19 - * J4 4 4Bit GPIO_INT20 - * K0 8 4Bit None - * K1 6 4Bit None - * K2 8 4Bit None - * K3 8 4Bit None - * L0 8 4Bit None - * L1 8 4Bit None - * L2 8 4Bit None - * L3 8 4Bit None - */ - -static struct s3c_gpio_cfg gpio_cfg = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_cfg_eint = { - .cfg_eint = 0xf, - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -/* - * GPIO bank's base address given the index of the bank in the - * list of all gpio banks. - */ -#define S5PC100_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20)) - -/* - * Following are the gpio banks in S5PC100. - * - * The 'config' member when left to NULL, is initialized to the default - * structure gpio_cfg in the init function below. - * - * The 'base' member is also initialized in the init function below. - * Note: The initialization of 'base' member of s3c_gpio_chip structure - * uses the above macro and depends on the banks being listed in order here. - */ -static struct s3c_gpio_chip s5pc100_gpio_chips[] = { - { - .chip = { - .base = S5PC100_GPA0(0), - .ngpio = S5PC100_GPIO_A0_NR, - .label = "GPA0", - }, - }, { - .chip = { - .base = S5PC100_GPA1(0), - .ngpio = S5PC100_GPIO_A1_NR, - .label = "GPA1", - }, - }, { - .chip = { - .base = S5PC100_GPB(0), - .ngpio = S5PC100_GPIO_B_NR, - .label = "GPB", - }, - }, { - .chip = { - .base = S5PC100_GPC(0), - .ngpio = S5PC100_GPIO_C_NR, - .label = "GPC", - }, - }, { - .chip = { - .base = S5PC100_GPD(0), - .ngpio = S5PC100_GPIO_D_NR, - .label = "GPD", - }, - }, { - .chip = { - .base = S5PC100_GPE0(0), - .ngpio = S5PC100_GPIO_E0_NR, - .label = "GPE0", - }, - }, { - .chip = { - .base = S5PC100_GPE1(0), - .ngpio = S5PC100_GPIO_E1_NR, - .label = "GPE1", - }, - }, { - .chip = { - .base = S5PC100_GPF0(0), - .ngpio = S5PC100_GPIO_F0_NR, - .label = "GPF0", - }, - }, { - .chip = { - .base = S5PC100_GPF1(0), - .ngpio = S5PC100_GPIO_F1_NR, - .label = "GPF1", - }, - }, { - .chip = { - .base = S5PC100_GPF2(0), - .ngpio = S5PC100_GPIO_F2_NR, - .label = "GPF2", - }, - }, { - .chip = { - .base = S5PC100_GPF3(0), - .ngpio = S5PC100_GPIO_F3_NR, - .label = "GPF3", - }, - }, { - .chip = { - .base = S5PC100_GPG0(0), - .ngpio = S5PC100_GPIO_G0_NR, - .label = "GPG0", - }, - }, { - .chip = { - .base = S5PC100_GPG1(0), - .ngpio = S5PC100_GPIO_G1_NR, - .label = "GPG1", - }, - }, { - .chip = { - .base = S5PC100_GPG2(0), - .ngpio = S5PC100_GPIO_G2_NR, - .label = "GPG2", - }, - }, { - .chip = { - .base = S5PC100_GPG3(0), - .ngpio = S5PC100_GPIO_G3_NR, - .label = "GPG3", - }, - }, { - .chip = { - .base = S5PC100_GPI(0), - .ngpio = S5PC100_GPIO_I_NR, - .label = "GPI", - }, - }, { - .chip = { - .base = S5PC100_GPJ0(0), - .ngpio = S5PC100_GPIO_J0_NR, - .label = "GPJ0", - }, - }, { - .chip = { - .base = S5PC100_GPJ1(0), - .ngpio = S5PC100_GPIO_J1_NR, - .label = "GPJ1", - }, - }, { - .chip = { - .base = S5PC100_GPJ2(0), - .ngpio = S5PC100_GPIO_J2_NR, - .label = "GPJ2", - }, - }, { - .chip = { - .base = S5PC100_GPJ3(0), - .ngpio = S5PC100_GPIO_J3_NR, - .label = "GPJ3", - }, - }, { - .chip = { - .base = S5PC100_GPJ4(0), - .ngpio = S5PC100_GPIO_J4_NR, - .label = "GPJ4", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK0(0), - .ngpio = S5PC100_GPIO_K0_NR, - .label = "GPK0", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK1(0), - .ngpio = S5PC100_GPIO_K1_NR, - .label = "GPK1", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK2(0), - .ngpio = S5PC100_GPIO_K2_NR, - .label = "GPK2", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK3(0), - .ngpio = S5PC100_GPIO_K3_NR, - .label = "GPK3", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL0(0), - .ngpio = S5PC100_GPIO_L0_NR, - .label = "GPL0", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL1(0), - .ngpio = S5PC100_GPIO_L1_NR, - .label = "GPL1", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL2(0), - .ngpio = S5PC100_GPIO_L2_NR, - .label = "GPL2", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL3(0), - .ngpio = S5PC100_GPIO_L3_NR, - .label = "GPL3", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL4(0), - .ngpio = S5PC100_GPIO_L4_NR, - .label = "GPL4", - }, - }, { - .base = (S5P_VA_GPIO + 0xC00), - .config = &gpio_cfg_eint, - .irq_base = IRQ_EINT(0), - .chip = { - .base = S5PC100_GPH0(0), - .ngpio = S5PC100_GPIO_H0_NR, - .label = "GPH0", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC20), - .config = &gpio_cfg_eint, - .irq_base = IRQ_EINT(8), - .chip = { - .base = S5PC100_GPH1(0), - .ngpio = S5PC100_GPIO_H1_NR, - .label = "GPH1", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC40), - .config = &gpio_cfg_eint, - .irq_base = IRQ_EINT(16), - .chip = { - .base = S5PC100_GPH2(0), - .ngpio = S5PC100_GPIO_H2_NR, - .label = "GPH2", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC60), - .config = &gpio_cfg_eint, - .irq_base = IRQ_EINT(24), - .chip = { - .base = S5PC100_GPH3(0), - .ngpio = S5PC100_GPIO_H3_NR, - .label = "GPH3", - .to_irq = samsung_gpiolib_to_irq, - }, - }, -}; - -static __init int s5pc100_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip = s5pc100_gpio_chips; - int nr_chips = ARRAY_SIZE(s5pc100_gpio_chips); - int gpioint_group = 0; - int i; - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - chip->group = gpioint_group++; - } - if (chip->base == NULL) - chip->base = S5PC100_BANK_BASE(i); - } - - samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, nr_chips); - s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); - - return 0; -} -core_initcall(s5pc100_gpiolib_init); diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 11f17907b4e..50907aca006 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -12,7 +12,7 @@ obj- := # Core support for S5PV210 system -obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o gpiolib.o +obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o obj-$(CONFIG_S5PV210_PM) += pm.o sleep.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o diff --git a/arch/arm/mach-s5pv210/gpiolib.c b/arch/arm/mach-s5pv210/gpiolib.c deleted file mode 100644 index 1ba20a703e0..00000000000 --- a/arch/arm/mach-s5pv210/gpiolib.c +++ /dev/null @@ -1,288 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/gpiolib.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV210 - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> -#include <mach/map.h> - -static struct s3c_gpio_cfg gpio_cfg = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -/* GPIO bank's base address given the index of the bank in the - * list of all gpio banks. - */ -#define S5PV210_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20)) - -/* - * Following are the gpio banks in v210. - * - * The 'config' member when left to NULL, is initialized to the default - * structure gpio_cfg in the init function below. - * - * The 'base' member is also initialized in the init function below. - * Note: The initialization of 'base' member of s3c_gpio_chip structure - * uses the above macro and depends on the banks being listed in order here. - */ -static struct s3c_gpio_chip s5pv210_gpio_4bit[] = { - { - .chip = { - .base = S5PV210_GPA0(0), - .ngpio = S5PV210_GPIO_A0_NR, - .label = "GPA0", - }, - }, { - .chip = { - .base = S5PV210_GPA1(0), - .ngpio = S5PV210_GPIO_A1_NR, - .label = "GPA1", - }, - }, { - .chip = { - .base = S5PV210_GPB(0), - .ngpio = S5PV210_GPIO_B_NR, - .label = "GPB", - }, - }, { - .chip = { - .base = S5PV210_GPC0(0), - .ngpio = S5PV210_GPIO_C0_NR, - .label = "GPC0", - }, - }, { - .chip = { - .base = S5PV210_GPC1(0), - .ngpio = S5PV210_GPIO_C1_NR, - .label = "GPC1", - }, - }, { - .chip = { - .base = S5PV210_GPD0(0), - .ngpio = S5PV210_GPIO_D0_NR, - .label = "GPD0", - }, - }, { - .chip = { - .base = S5PV210_GPD1(0), - .ngpio = S5PV210_GPIO_D1_NR, - .label = "GPD1", - }, - }, { - .chip = { - .base = S5PV210_GPE0(0), - .ngpio = S5PV210_GPIO_E0_NR, - .label = "GPE0", - }, - }, { - .chip = { - .base = S5PV210_GPE1(0), - .ngpio = S5PV210_GPIO_E1_NR, - .label = "GPE1", - }, - }, { - .chip = { - .base = S5PV210_GPF0(0), - .ngpio = S5PV210_GPIO_F0_NR, - .label = "GPF0", - }, - }, { - .chip = { - .base = S5PV210_GPF1(0), - .ngpio = S5PV210_GPIO_F1_NR, - .label = "GPF1", - }, - }, { - .chip = { - .base = S5PV210_GPF2(0), - .ngpio = S5PV210_GPIO_F2_NR, - .label = "GPF2", - }, - }, { - .chip = { - .base = S5PV210_GPF3(0), - .ngpio = S5PV210_GPIO_F3_NR, - .label = "GPF3", - }, - }, { - .chip = { - .base = S5PV210_GPG0(0), - .ngpio = S5PV210_GPIO_G0_NR, - .label = "GPG0", - }, - }, { - .chip = { - .base = S5PV210_GPG1(0), - .ngpio = S5PV210_GPIO_G1_NR, - .label = "GPG1", - }, - }, { - .chip = { - .base = S5PV210_GPG2(0), - .ngpio = S5PV210_GPIO_G2_NR, - .label = "GPG2", - }, - }, { - .chip = { - .base = S5PV210_GPG3(0), - .ngpio = S5PV210_GPIO_G3_NR, - .label = "GPG3", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_GPI(0), - .ngpio = S5PV210_GPIO_I_NR, - .label = "GPI", - }, - }, { - .chip = { - .base = S5PV210_GPJ0(0), - .ngpio = S5PV210_GPIO_J0_NR, - .label = "GPJ0", - }, - }, { - .chip = { - .base = S5PV210_GPJ1(0), - .ngpio = S5PV210_GPIO_J1_NR, - .label = "GPJ1", - }, - }, { - .chip = { - .base = S5PV210_GPJ2(0), - .ngpio = S5PV210_GPIO_J2_NR, - .label = "GPJ2", - }, - }, { - .chip = { - .base = S5PV210_GPJ3(0), - .ngpio = S5PV210_GPIO_J3_NR, - .label = "GPJ3", - }, - }, { - .chip = { - .base = S5PV210_GPJ4(0), - .ngpio = S5PV210_GPIO_J4_NR, - .label = "GPJ4", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP01(0), - .ngpio = S5PV210_GPIO_MP01_NR, - .label = "MP01", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP02(0), - .ngpio = S5PV210_GPIO_MP02_NR, - .label = "MP02", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP03(0), - .ngpio = S5PV210_GPIO_MP03_NR, - .label = "MP03", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP04(0), - .ngpio = S5PV210_GPIO_MP04_NR, - .label = "MP04", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP05(0), - .ngpio = S5PV210_GPIO_MP05_NR, - .label = "MP05", - }, - }, { - .base = (S5P_VA_GPIO + 0xC00), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(0), - .chip = { - .base = S5PV210_GPH0(0), - .ngpio = S5PV210_GPIO_H0_NR, - .label = "GPH0", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC20), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(8), - .chip = { - .base = S5PV210_GPH1(0), - .ngpio = S5PV210_GPIO_H1_NR, - .label = "GPH1", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC40), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(16), - .chip = { - .base = S5PV210_GPH2(0), - .ngpio = S5PV210_GPIO_H2_NR, - .label = "GPH2", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC60), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(24), - .chip = { - .base = S5PV210_GPH3(0), - .ngpio = S5PV210_GPIO_H3_NR, - .label = "GPH3", - .to_irq = samsung_gpiolib_to_irq, - }, - }, -}; - -static __init int s5pv210_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip = s5pv210_gpio_4bit; - int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit); - int gpioint_group = 0; - int i = 0; - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - chip->group = gpioint_group++; - } - if (chip->base == NULL) - chip->base = S5PV210_BANK_BASE(i); - } - - samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips); - s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); - - return 0; -} -core_initcall(s5pv210_gpiolib_init); diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile index fab46fe9a71..8fd354aaf0a 100644 --- a/arch/arm/mach-u300/Makefile +++ b/arch/arm/mach-u300/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel, U300 machine. # -obj-y := core.o clock.o timer.o gpio.o padmux.o +obj-y := core.o clock.o timer.o padmux.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c deleted file mode 100644 index d92790140fe..00000000000 --- a/arch/arm/mach-u300/gpio.c +++ /dev/null @@ -1,700 +0,0 @@ -/* - * - * arch/arm/mach-u300/gpio.c - * - * - * Copyright (C) 2007-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * U300 GPIO module. - * This can driver either of the two basic GPIO cores - * available in the U300 platforms: - * COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0) - * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0) - * Notice that you also have inline macros in <asm-arch/gpio.h> - * Author: Linus Walleij <linus.walleij@stericsson.com> - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> - * - */ -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> - -/* Reference to GPIO block clock */ -static struct clk *clk; - -/* Memory resource */ -static struct resource *memres; -static void __iomem *virtbase; -static struct device *gpiodev; - -struct u300_gpio_port { - const char *name; - int irq; - int number; -}; - - -static struct u300_gpio_port gpio_ports[] = { - { - .name = "gpio0", - .number = 0, - }, - { - .name = "gpio1", - .number = 1, - }, - { - .name = "gpio2", - .number = 2, - }, -#ifdef U300_COH901571_3 - { - .name = "gpio3", - .number = 3, - }, - { - .name = "gpio4", - .number = 4, - }, -#ifdef CONFIG_MACH_U300_BS335 - { - .name = "gpio5", - .number = 5, - }, - { - .name = "gpio6", - .number = 6, - }, -#endif -#endif - -}; - - -#ifdef U300_COH901571_3 - -/* Default input value */ -#define DEFAULT_OUTPUT_LOW 0 -#define DEFAULT_OUTPUT_HIGH 1 - -/* GPIO Pull-Up status */ -#define DISABLE_PULL_UP 0 -#define ENABLE_PULL_UP 1 - -#define GPIO_NOT_USED 0 -#define GPIO_IN 1 -#define GPIO_OUT 2 - -struct u300_gpio_configuration_data { - unsigned char pin_usage; - unsigned char default_output_value; - unsigned char pull_up; -}; - -/* Initial configuration */ -const struct u300_gpio_configuration_data -u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { -#ifdef CONFIG_MACH_U300_BS335 - /* Port 0, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - }, - /* Port 1, pins 0-7 */ - { - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - }, - /* Port 2, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} - }, - /* Port 3, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - }, - /* Port 4, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - }, - /* Port 5, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - }, - /* Port 6, pind 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - } -#endif - -#ifdef CONFIG_MACH_U300_BS365 - /* Port 0, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - }, - /* Port 1, pins 0-7 */ - { - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - }, - /* Port 2, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} - }, - /* Port 3, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} - }, - /* Port 4, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - /* These 4 pins doesn't exist on DB3210 */ - {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} - } -#endif -}; -#endif - - -/* No users == we can power down GPIO */ -static int gpio_users; - -struct gpio_struct { - int (*callback)(void *); - void *data; - int users; -}; - -static struct gpio_struct gpio_pin[U300_GPIO_MAX]; - -/* - * Let drivers register callback in order to get notified when there is - * an interrupt on the gpio pin - */ -int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data) -{ - if (gpio_pin[gpio].callback) - dev_warn(gpiodev, "%s: WARNING: callback already " - "registered for gpio pin#%d\n", __func__, gpio); - gpio_pin[gpio].callback = func; - gpio_pin[gpio].data = data; - - return 0; -} -EXPORT_SYMBOL(gpio_register_callback); - -int gpio_unregister_callback(unsigned gpio) -{ - if (!gpio_pin[gpio].callback) - dev_warn(gpiodev, "%s: WARNING: callback already " - "unregistered for gpio pin#%d\n", __func__, gpio); - gpio_pin[gpio].callback = NULL; - gpio_pin[gpio].data = NULL; - - return 0; -} -EXPORT_SYMBOL(gpio_unregister_callback); - -/* Non-zero means valid */ -int gpio_is_valid(int number) -{ - if (number >= 0 && - number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT)) - return 1; - return 0; -} -EXPORT_SYMBOL(gpio_is_valid); - -int gpio_request(unsigned gpio, const char *label) -{ - if (gpio_pin[gpio].users) - return -EINVAL; - else - gpio_pin[gpio].users++; - - gpio_users++; - - return 0; -} -EXPORT_SYMBOL(gpio_request); - -void gpio_free(unsigned gpio) -{ - gpio_users--; - gpio_pin[gpio].users--; - if (unlikely(gpio_pin[gpio].users < 0)) { - dev_warn(gpiodev, "warning: gpio#%d release mismatch\n", - gpio); - gpio_pin[gpio].users = 0; - } - - return; -} -EXPORT_SYMBOL(gpio_free); - -/* This returns zero or nonzero */ -int gpio_get_value(unsigned gpio) -{ - return readl(virtbase + U300_GPIO_PXPDIR + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07)); -} -EXPORT_SYMBOL(gpio_get_value); - -/* - * We hope that the compiler will optimize away the unused branch - * in case "value" is a constant - */ -void gpio_set_value(unsigned gpio, int value) -{ - u32 val; - unsigned long flags; - - local_irq_save(flags); - if (value) { - /* set */ - val = readl(virtbase + U300_GPIO_PXPDOR + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) - & (1 << (gpio & 0x07)); - writel(val | (1 << (gpio & 0x07)), virtbase + - U300_GPIO_PXPDOR + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); - } else { - /* clear */ - val = readl(virtbase + U300_GPIO_PXPDOR + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) - & (1 << (gpio & 0x07)); - writel(val & ~(1 << (gpio & 0x07)), virtbase + - U300_GPIO_PXPDOR + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); - } - local_irq_restore(flags); -} -EXPORT_SYMBOL(gpio_set_value); - -int gpio_direction_input(unsigned gpio) -{ - unsigned long flags; - u32 val; - - if (gpio > U300_GPIO_MAX) - return -EINVAL; - - local_irq_save(flags); - val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - /* Mask out this pin*/ - val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1)); - /* This is not needed since it sets the bits to zero.*/ - /* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */ - writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - local_irq_restore(flags); - return 0; -} -EXPORT_SYMBOL(gpio_direction_input); - -int gpio_direction_output(unsigned gpio, int value) -{ - unsigned long flags; - u32 val; - - if (gpio > U300_GPIO_MAX) - return -EINVAL; - - local_irq_save(flags); - val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - /* Mask out this pin */ - val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1)); - /* - * FIXME: configure for push/pull, open drain or open source per pin - * in setup. The current driver will only support push/pull. - */ - val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL - << ((gpio & 0x07) << 1)); - writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - gpio_set_value(gpio, value); - local_irq_restore(flags); - return 0; -} -EXPORT_SYMBOL(gpio_direction_output); - -/* - * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0). - */ -void enable_irq_on_gpio_pin(unsigned gpio, int edge) -{ - u32 val; - unsigned long flags; - local_irq_save(flags); - - val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - val |= (1 << (gpio & 0x07)); - writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - if (edge) - val |= (1 << (gpio & 0x07)); - else - val &= ~(1 << (gpio & 0x07)); - writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - local_irq_restore(flags); -} -EXPORT_SYMBOL(enable_irq_on_gpio_pin); - -void disable_irq_on_gpio_pin(unsigned gpio) -{ - u32 val; - unsigned long flags; - - local_irq_save(flags); - val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - val &= ~(1 << (gpio & 0x07)); - writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - local_irq_restore(flags); -} -EXPORT_SYMBOL(disable_irq_on_gpio_pin); - -/* Enable (value == 0) or disable (value == 1) internal pullup */ -void gpio_pullup(unsigned gpio, int value) -{ - u32 val; - unsigned long flags; - - local_irq_save(flags); - if (value) { - val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); - } else { - val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); - } - local_irq_restore(flags); -} -EXPORT_SYMBOL(gpio_pullup); - -static irqreturn_t gpio_irq_handler(int irq, void *dev_id) -{ - struct u300_gpio_port *port = dev_id; - u32 val; - int pin; - - /* Read event register */ - val = readl(virtbase + U300_GPIO_PXIEV + port->number * - U300_GPIO_PORTX_SPACING); - /* Mask with enable register */ - val &= readl(virtbase + U300_GPIO_PXIEV + port->number * - U300_GPIO_PORTX_SPACING); - /* Mask relevant bits */ - val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK; - /* ACK IRQ (clear event) */ - writel(val, virtbase + U300_GPIO_PXIEV + port->number * - U300_GPIO_PORTX_SPACING); - /* Print message */ - while (val != 0) { - unsigned gpio; - - pin = __ffs(val); - /* mask off this pin */ - val &= ~(1 << pin); - gpio = (port->number << 3) + pin; - - if (gpio_pin[gpio].callback) - (void)gpio_pin[gpio].callback(gpio_pin[gpio].data); - else - dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n", - gpio); - } - return IRQ_HANDLED; -} - -static void gpio_set_initial_values(void) -{ -#ifdef U300_COH901571_3 - int i, j; - unsigned long flags; - u32 val; - - /* Write default values to all pins */ - for (i = 0; i < U300_GPIO_NUM_PORTS; i++) { - val = 0; - for (j = 0; j < 8; j++) - val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j; - local_irq_save(flags); - writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING); - local_irq_restore(flags); - } - - /* - * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED' - * to output and 'GPIO_IN' to input for each port. And initialize - * default value on outputs. - */ - for (i = 0; i < U300_GPIO_NUM_PORTS; i++) { - for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) { - local_irq_save(flags); - val = readl(virtbase + U300_GPIO_PXPCR + - i * U300_GPIO_PORTX_SPACING); - /* Mask out this pin */ - val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1)); - - if (u300_gpio_config[i][j].pin_usage != GPIO_IN) - val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1)); - writel(val, virtbase + U300_GPIO_PXPCR + - i * U300_GPIO_PORTX_SPACING); - local_irq_restore(flags); - } - } - - /* Enable or disable the internal pull-ups in the GPIO ASIC block */ - for (i = 0; i < U300_GPIO_MAX; i++) { - val = 0; - for (j = 0; j < 8; j++) - val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP) << j); - local_irq_save(flags); - writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING); - local_irq_restore(flags); - } -#endif -} - -static int __init gpio_probe(struct platform_device *pdev) -{ - u32 val; - int err = 0; - int i; - int num_irqs; - - gpiodev = &pdev->dev; - memset(gpio_pin, 0, sizeof(gpio_pin)); - - /* Get GPIO clock */ - clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(clk)) { - err = PTR_ERR(clk); - dev_err(gpiodev, "could not get GPIO clock\n"); - goto err_no_clk; - } - err = clk_enable(clk); - if (err) { - dev_err(gpiodev, "could not enable GPIO clock\n"); - goto err_no_clk_enable; - } - - memres = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!memres) - goto err_no_resource; - - if (request_mem_region(memres->start, memres->end - memres->start, "GPIO Controller") - == NULL) { - err = -ENODEV; - goto err_no_ioregion; - } - - virtbase = ioremap(memres->start, resource_size(memres)); - if (!virtbase) { - err = -ENOMEM; - goto err_no_ioremap; - } - dev_info(gpiodev, "remapped 0x%08x to %p\n", - memres->start, virtbase); - -#ifdef U300_COH901335 - dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n"); - /* Turn on the GPIO block */ - writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR); -#endif - -#ifdef U300_COH901571_3 - dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n"); - val = readl(virtbase + U300_GPIO_CR); - dev_info(gpiodev, "COH901571/3 block version: %d, " \ - "number of cores: %d\n", - ((val & 0x0000FE00) >> 9), - ((val & 0x000001FC) >> 2)); - writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR); -#endif - - gpio_set_initial_values(); - - for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) { - - gpio_ports[num_irqs].irq = - platform_get_irq_byname(pdev, - gpio_ports[num_irqs].name); - - err = request_irq(gpio_ports[num_irqs].irq, - gpio_irq_handler, IRQF_DISABLED, - gpio_ports[num_irqs].name, - &gpio_ports[num_irqs]); - if (err) { - dev_err(gpiodev, "cannot allocate IRQ for %s!\n", - gpio_ports[num_irqs].name); - goto err_no_irq; - } - /* Turns off PortX_irq_force */ - writel(0x0, virtbase + U300_GPIO_PXIFR + - num_irqs * U300_GPIO_PORTX_SPACING); - } - - return 0; - - err_no_irq: - for (i = 0; i < num_irqs; i++) - free_irq(gpio_ports[i].irq, &gpio_ports[i]); - iounmap(virtbase); - err_no_ioremap: - release_mem_region(memres->start, memres->end - memres->start); - err_no_ioregion: - err_no_resource: - clk_disable(clk); - err_no_clk_enable: - clk_put(clk); - err_no_clk: - dev_info(gpiodev, "module ERROR:%d\n", err); - return err; -} - -static int __exit gpio_remove(struct platform_device *pdev) -{ - int i; - - /* Turn off the GPIO block */ - writel(0x00000000U, virtbase + U300_GPIO_CR); - for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++) - free_irq(gpio_ports[i].irq, &gpio_ports[i]); - iounmap(virtbase); - release_mem_region(memres->start, memres->end - memres->start); - clk_disable(clk); - clk_put(clk); - return 0; -} - -static struct platform_driver gpio_driver = { - .driver = { - .name = "u300-gpio", - }, - .remove = __exit_p(gpio_remove), -}; - - -static int __init u300_gpio_init(void) -{ - return platform_driver_probe(&gpio_driver, gpio_probe); -} - -static void __exit u300_gpio_exit(void) -{ - platform_driver_unregister(&gpio_driver); -} - -arch_initcall(u300_gpio_init); -module_exit(u300_gpio_exit); - -MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>"); - -#ifdef U300_COH901571_3 -MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver"); -#endif - -#ifdef U300_COH901335 -MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver"); -#endif - -MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 54429d01595..f8b9392ee34 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -5,7 +5,6 @@ config UX500_SOC_COMMON default y select ARM_GIC select HAS_MTU - select NOMADIK_GPIO select ARM_ERRATA_753970 menu "Ux500 SoC" diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index bf0b02414e5..7c6cb4fa47a 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -99,8 +99,11 @@ static void sdi0_configure(void) gpio_direction_output(sdi0_vsel, 0); gpio_direction_output(sdi0_en, 1); - /* Add the device */ - db8500_add_sdi0(&mop500_sdi0_data); + /* Add the device, force v2 to subrevision 1 */ + if (cpu_is_u8500v2()) + db8500_add_sdi0(&mop500_sdi0_data, 0x10480180); + else + db8500_add_sdi0(&mop500_sdi0_data, 0); } void mop500_sdi_tc35892_init(void) @@ -188,13 +191,18 @@ static struct mmci_platform_data mop500_sdi4_data = { void __init mop500_sdi_init(void) { + u32 periphid = 0; + + /* v2 has a new version of this block that need to be forced */ + if (cpu_is_u8500v2()) + periphid = 0x10480180; /* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */ if (!cpu_is_u8500v10()) mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED; - db8500_add_sdi2(&mop500_sdi2_data); + db8500_add_sdi2(&mop500_sdi2_data, periphid); /* On-board eMMC */ - db8500_add_sdi4(&mop500_sdi4_data); + db8500_add_sdi4(&mop500_sdi4_data, periphid); if (machine_is_hrefv60()) { mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h index c719b5a1d91..7825705033b 100644 --- a/arch/arm/mach-ux500/devices-common.h +++ b/arch/arm/mach-ux500/devices-common.h @@ -28,18 +28,20 @@ dbx500_add_msp_spi(const char *name, resource_size_t base, int irq, static inline struct amba_device * dbx500_add_spi(const char *name, resource_size_t base, int irq, - struct spi_master_cntlr *pdata) + struct spi_master_cntlr *pdata, + u32 periphid) { - return dbx500_add_amba_device(name, base, irq, pdata, 0); + return dbx500_add_amba_device(name, base, irq, pdata, periphid); } struct mmci_platform_data; static inline struct amba_device * dbx500_add_sdi(const char *name, resource_size_t base, int irq, - struct mmci_platform_data *pdata) + struct mmci_platform_data *pdata, + u32 periphid) { - return dbx500_add_amba_device(name, base, irq, pdata, 0); + return dbx500_add_amba_device(name, base, irq, pdata, periphid); } struct amba_pl011_data; diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h index 94627f7783b..0c4bccd02b9 100644 --- a/arch/arm/mach-ux500/devices-db5500.h +++ b/arch/arm/mach-ux500/devices-db5500.h @@ -38,24 +38,34 @@ ux500_add_usb(U5500_USBOTG_BASE, IRQ_DB5500_USBOTG, rx_cfg, tx_cfg) #define db5500_add_sdi0(pdata) \ - dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata) + dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata, \ + 0x10480180) #define db5500_add_sdi1(pdata) \ - dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata) + dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata, \ + 0x10480180) #define db5500_add_sdi2(pdata) \ - dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata) + dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata \ + 0x10480180) #define db5500_add_sdi3(pdata) \ - dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata) + dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata \ + 0x10480180) #define db5500_add_sdi4(pdata) \ - dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata) + dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata \ + 0x10480180) +/* This one has a bad peripheral ID in the U5500 silicon */ #define db5500_add_spi0(pdata) \ - dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata) + dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata, \ + 0x10080023) #define db5500_add_spi1(pdata) \ - dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata) + dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata, \ + 0x10080023) #define db5500_add_spi2(pdata) \ - dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata) + dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata \ + 0x10080023) #define db5500_add_spi3(pdata) \ - dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata) + dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata \ + 0x10080023) #define db5500_add_uart0(plat) \ dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0, plat) diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h index 9cc6f8f5d3e..cbd4a9ae810 100644 --- a/arch/arm/mach-ux500/devices-db8500.h +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -25,7 +25,7 @@ static inline struct amba_device * db8500_add_ssp(const char *name, resource_size_t base, int irq, struct pl022_ssp_controller *pdata) { - return dbx500_add_amba_device(name, base, irq, pdata, SSP_PER_ID); + return dbx500_add_amba_device(name, base, irq, pdata, 0); } @@ -64,18 +64,18 @@ db8500_add_ssp(const char *name, resource_size_t base, int irq, #define db8500_add_usb(rx_cfg, tx_cfg) \ ux500_add_usb(U8500_USBOTG_BASE, IRQ_DB8500_USBOTG, rx_cfg, tx_cfg) -#define db8500_add_sdi0(pdata) \ - dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata) -#define db8500_add_sdi1(pdata) \ - dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata) -#define db8500_add_sdi2(pdata) \ - dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata) -#define db8500_add_sdi3(pdata) \ - dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata) -#define db8500_add_sdi4(pdata) \ - dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata) -#define db8500_add_sdi5(pdata) \ - dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata) +#define db8500_add_sdi0(pdata, pid) \ + dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata, pid) +#define db8500_add_sdi1(pdata, pid) \ + dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata, pid) +#define db8500_add_sdi2(pdata, pid) \ + dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata, pid) +#define db8500_add_sdi3(pdata, pid) \ + dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata, pid) +#define db8500_add_sdi4(pdata, pid) \ + dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata, pid) +#define db8500_add_sdi5(pdata, pid) \ + dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata, pid) #define db8500_add_ssp0(pdata) \ db8500_add_ssp("ssp0", U8500_SSP0_BASE, IRQ_DB8500_SSP0, pdata) @@ -83,13 +83,13 @@ db8500_add_ssp(const char *name, resource_size_t base, int irq, db8500_add_ssp("ssp1", U8500_SSP1_BASE, IRQ_DB8500_SSP1, pdata) #define db8500_add_spi0(pdata) \ - dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata) + dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata, 0) #define db8500_add_spi1(pdata) \ - dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata) + dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata, 0) #define db8500_add_spi2(pdata) \ - dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata) + dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata, 0) #define db8500_add_spi3(pdata) \ - dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata) + dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata, 0) #define db8500_add_uart0(pdata) \ dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0, pdata) diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index 2c6f71049f2..470ac52663d 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -29,9 +29,6 @@ #include <mach/db8500-regs.h> #include <mach/db5500-regs.h> -/* ST-Ericsson modified pl022 id */ -#define SSP_PER_ID 0x01080022 - #ifndef __ASSEMBLY__ #include <mach/id.h> diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index c96fa1b3f49..73b4a8b66a5 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -176,6 +176,7 @@ ENDPROC(v6_coherent_kern_range) */ ENTRY(v6_flush_kern_dcache_area) add r1, r0, r1 + bic r0, r0, #D_CACHE_LINE_SIZE - 1 1: #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index dc18d81ef8c..d32f02b6186 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -221,6 +221,8 @@ ENDPROC(v7_coherent_user_range) ENTRY(v7_flush_kern_dcache_area) dcache_line_size r2, r3 add r1, r0, r1 + sub r3, r2, #1 + bic r0, r0, r3 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line add r0, r0, r2 diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index b0ee9ba3cfa..8bfae964b13 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -24,9 +24,7 @@ DEFINE_PER_CPU(struct mm_struct *, current_mm); /* * We fork()ed a process, and we need a new context for the child - * to run in. We reserve version 0 for initial tasks so we will - * always allocate an ASID. The ASID 0 is reserved for the TTBR - * register changing sequence. + * to run in. */ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) { @@ -36,8 +34,11 @@ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) static void flush_context(void) { - /* set the reserved ASID before flushing the TLB */ - asm("mcr p15, 0, %0, c13, c0, 1\n" : : "r" (0)); + u32 ttb; + /* Copy TTBR1 into TTBR0 */ + asm volatile("mrc p15, 0, %0, c2, c0, 1\n" + "mcr p15, 0, %0, c2, c0, 0" + : "=r" (ttb)); isb(); local_flush_tlb_all(); if (icache_is_vivt_asid_tagged()) { @@ -93,7 +94,7 @@ static void reset_context(void *info) return; smp_rmb(); - asid = cpu_last_asid + cpu + 1; + asid = cpu_last_asid + cpu; flush_context(); set_mm_context(mm, asid); @@ -143,13 +144,13 @@ void __new_context(struct mm_struct *mm) * to start a new version and flush the TLB. */ if (unlikely((asid & ~ASID_MASK) == 0)) { - asid = cpu_last_asid + smp_processor_id() + 1; + asid = cpu_last_asid + smp_processor_id(); flush_context(); #ifdef CONFIG_SMP smp_wmb(); smp_call_function(reset_context, NULL, 1); #endif - cpu_last_asid += NR_CPUS; + cpu_last_asid += NR_CPUS - 1; } set_mm_context(mm, asid); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 3f17ea146f0..2c2cce9cd8c 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -15,12 +15,14 @@ #include <linux/mman.h> #include <linux/nodemask.h> #include <linux/initrd.h> +#include <linux/of_fdt.h> #include <linux/highmem.h> #include <linux/gfp.h> #include <linux/memblock.h> #include <linux/sort.h> #include <asm/mach-types.h> +#include <asm/prom.h> #include <asm/sections.h> #include <asm/setup.h> #include <asm/sizes.h> @@ -71,6 +73,14 @@ static int __init parse_tag_initrd2(const struct tag *tag) __tagtable(ATAG_INITRD2, parse_tag_initrd2); +#ifdef CONFIG_OF_FLATTREE +void __init early_init_dt_setup_initrd_arch(unsigned long start, unsigned long end) +{ + phys_initrd_start = start; + phys_initrd_size = end - start; +} +#endif /* CONFIG_OF_FLATTREE */ + /* * This keeps memory configuration data used by a couple memory * initialization functions, as well as show_mem() for the skipping @@ -273,13 +283,15 @@ static void __init arm_bootmem_free(unsigned long min, unsigned long max_low, free_area_init_node(0, zone_size, min, zhole_size); } -#ifndef CONFIG_SPARSEMEM +#ifdef CONFIG_HAVE_ARCH_PFN_VALID int pfn_valid(unsigned long pfn) { return memblock_is_memory(pfn << PAGE_SHIFT); } EXPORT_SYMBOL(pfn_valid); +#endif +#ifndef CONFIG_SPARSEMEM static void arm_memory_present(void) { } @@ -334,6 +346,7 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc) #endif arm_mm_memblock_reserve(); + arm_dt_memblock_reserve(); /* reserve any platform specific memblock areas */ if (mdesc->reserve) diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index d2384106af9..5b3d7d54365 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -5,14 +5,9 @@ extern pmd_t *top_pmd; #define TOP_PTE(x) pte_offset_kernel(top_pmd, x) -static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt) -{ - return pmd_offset(pud_offset(pgd, virt), virt); -} - static inline pmd_t *pmd_off_k(unsigned long virt) { - return pmd_off(pgd_offset_k(virt), virt); + return pmd_offset(pud_offset(pgd_offset_k(virt), virt), virt); } struct mem_type { diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 08a92368d9d..9d9e736c2b4 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -763,15 +763,12 @@ static void __init sanity_check_meminfo(void) { int i, j, highmem = 0; - lowmem_limit = __pa(vmalloc_min - 1) + 1; - memblock_set_current_limit(lowmem_limit); - for (i = 0, j = 0; i < meminfo.nr_banks; i++) { struct membank *bank = &meminfo.bank[j]; *bank = meminfo.bank[i]; #ifdef CONFIG_HIGHMEM - if (__va(bank->start) > vmalloc_min || + if (__va(bank->start) >= vmalloc_min || __va(bank->start) < (void *)PAGE_OFFSET) highmem = 1; @@ -829,6 +826,9 @@ static void __init sanity_check_meminfo(void) bank->size = newsize; } #endif + if (!bank->highmem && bank->start + bank->size > lowmem_limit) + lowmem_limit = bank->start + bank->size; + j++; } #ifdef CONFIG_HIGHMEM @@ -852,6 +852,7 @@ static void __init sanity_check_meminfo(void) } #endif meminfo.nr_banks = j; + memblock_set_current_limit(lowmem_limit); } static inline void prepare_page_table(void) diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index ab17cc0d3fa..1d2b8451bf2 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -213,7 +213,9 @@ __v6_setup: mcr p15, 0, r0, c2, c0, 2 @ TTB control register ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP) ALT_UP(orr r4, r4, #TTB_FLAGS_UP) - mcr p15, 0, r4, c2, c0, 1 @ load TTB1 + ALT_SMP(orr r8, r8, #TTB_FLAGS_SMP) + ALT_UP(orr r8, r8, #TTB_FLAGS_UP) + mcr p15, 0, r8, c2, c0, 1 @ load TTB1 #endif /* CONFIG_MMU */ adr r5, v6_crval ldmia r5, {r5, r6} diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index babfba09c89..b3b566ec83d 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -108,18 +108,16 @@ ENTRY(cpu_v7_switch_mm) #ifdef CONFIG_ARM_ERRATA_430973 mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB #endif -#ifdef CONFIG_ARM_ERRATA_754322 - dsb -#endif - mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID - isb -1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 + mrc p15, 0, r2, c2, c0, 1 @ load TTB 1 + mcr p15, 0, r2, c2, c0, 0 @ into TTB 0 isb #ifdef CONFIG_ARM_ERRATA_754322 dsb #endif mcr p15, 0, r1, c13, c0, 1 @ set context ID isb + mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 + isb #endif mov pc, lr ENDPROC(cpu_v7_switch_mm) @@ -368,7 +366,9 @@ __v7_setup: mcr p15, 0, r10, c2, c0, 2 @ TTB control register ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP) ALT_UP(orr r4, r4, #TTB_FLAGS_UP) - mcr p15, 0, r4, c2, c0, 1 @ load TTB1 + ALT_SMP(orr r8, r8, #TTB_FLAGS_SMP) + ALT_UP(orr r8, r8, #TTB_FLAGS_UP) + mcr p15, 0, r8, c2, c0, 1 @ load TTB1 ldr r5, =PRRR @ PRRR ldr r6, =NMRR @ NMRR mcr p15, 0, r5, c10, c2, 0 @ write PRRR diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig index 18296ee6880..ce659015535 100644 --- a/arch/arm/plat-nomadik/Kconfig +++ b/arch/arm/plat-nomadik/Kconfig @@ -21,9 +21,4 @@ config HAS_MTU to multiple interrupt generating programmable 32-bit free running decrementing counters. -config NOMADIK_GPIO - bool - help - Support for the Nomadik GPIO controller. - endif diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile index c33547361bd..37c7cdd0f8f 100644 --- a/arch/arm/plat-nomadik/Makefile +++ b/arch/arm/plat-nomadik/Makefile @@ -3,4 +3,3 @@ # Licensed under GPLv2 obj-$(CONFIG_HAS_MTU) += timer.o -obj-$(CONFIG_NOMADIK_GPIO) += gpio.o diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c deleted file mode 100644 index 307b8131aa8..00000000000 --- a/arch/arm/plat-nomadik/gpio.c +++ /dev/null @@ -1,1020 +0,0 @@ -/* - * Generic GPIO driver for logic cells found in the Nomadik SoC - * - * Copyright (C) 2008,2009 STMicroelectronics - * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> - * Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/gpio.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/slab.h> - -#include <asm/mach/irq.h> - -#include <plat/pincfg.h> -#include <mach/hardware.h> -#include <mach/gpio.h> - -/* - * The GPIO module in the Nomadik family of Systems-on-Chip is an - * AMBA device, managing 32 pins and alternate functions. The logic block - * is currently used in the Nomadik and ux500. - * - * Symbols in this file are called "nmk_gpio" for "nomadik gpio" - */ - -#define NMK_GPIO_PER_CHIP 32 - -struct nmk_gpio_chip { - struct gpio_chip chip; - void __iomem *addr; - struct clk *clk; - unsigned int bank; - unsigned int parent_irq; - int secondary_parent_irq; - u32 (*get_secondary_status)(unsigned int bank); - void (*set_ioforce)(bool enable); - spinlock_t lock; - /* Keep track of configured edges */ - u32 edge_rising; - u32 edge_falling; - u32 real_wake; - u32 rwimsc; - u32 fwimsc; - u32 slpm; - u32 enabled; -}; - -static struct nmk_gpio_chip * -nmk_gpio_chips[DIV_ROUND_UP(ARCH_NR_GPIOS, NMK_GPIO_PER_CHIP)]; - -static DEFINE_SPINLOCK(nmk_gpio_slpm_lock); - -#define NUM_BANKS ARRAY_SIZE(nmk_gpio_chips) - -static void __nmk_gpio_set_mode(struct nmk_gpio_chip *nmk_chip, - unsigned offset, int gpio_mode) -{ - u32 bit = 1 << offset; - u32 afunc, bfunc; - - afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit; - bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit; - if (gpio_mode & NMK_GPIO_ALT_A) - afunc |= bit; - if (gpio_mode & NMK_GPIO_ALT_B) - bfunc |= bit; - writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA); - writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB); -} - -static void __nmk_gpio_set_slpm(struct nmk_gpio_chip *nmk_chip, - unsigned offset, enum nmk_gpio_slpm mode) -{ - u32 bit = 1 << offset; - u32 slpm; - - slpm = readl(nmk_chip->addr + NMK_GPIO_SLPC); - if (mode == NMK_GPIO_SLPM_NOCHANGE) - slpm |= bit; - else - slpm &= ~bit; - writel(slpm, nmk_chip->addr + NMK_GPIO_SLPC); -} - -static void __nmk_gpio_set_pull(struct nmk_gpio_chip *nmk_chip, - unsigned offset, enum nmk_gpio_pull pull) -{ - u32 bit = 1 << offset; - u32 pdis; - - pdis = readl(nmk_chip->addr + NMK_GPIO_PDIS); - if (pull == NMK_GPIO_PULL_NONE) - pdis |= bit; - else - pdis &= ~bit; - writel(pdis, nmk_chip->addr + NMK_GPIO_PDIS); - - if (pull == NMK_GPIO_PULL_UP) - writel(bit, nmk_chip->addr + NMK_GPIO_DATS); - else if (pull == NMK_GPIO_PULL_DOWN) - writel(bit, nmk_chip->addr + NMK_GPIO_DATC); -} - -static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip, - unsigned offset) -{ - writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC); -} - -static void __nmk_gpio_set_output(struct nmk_gpio_chip *nmk_chip, - unsigned offset, int val) -{ - if (val) - writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATS); - else - writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATC); -} - -static void __nmk_gpio_make_output(struct nmk_gpio_chip *nmk_chip, - unsigned offset, int val) -{ - writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS); - __nmk_gpio_set_output(nmk_chip, offset, val); -} - -static void __nmk_gpio_set_mode_safe(struct nmk_gpio_chip *nmk_chip, - unsigned offset, int gpio_mode, - bool glitch) -{ - u32 rwimsc = readl(nmk_chip->addr + NMK_GPIO_RWIMSC); - u32 fwimsc = readl(nmk_chip->addr + NMK_GPIO_FWIMSC); - - if (glitch && nmk_chip->set_ioforce) { - u32 bit = BIT(offset); - - /* Prevent spurious wakeups */ - writel(rwimsc & ~bit, nmk_chip->addr + NMK_GPIO_RWIMSC); - writel(fwimsc & ~bit, nmk_chip->addr + NMK_GPIO_FWIMSC); - - nmk_chip->set_ioforce(true); - } - - __nmk_gpio_set_mode(nmk_chip, offset, gpio_mode); - - if (glitch && nmk_chip->set_ioforce) { - nmk_chip->set_ioforce(false); - - writel(rwimsc, nmk_chip->addr + NMK_GPIO_RWIMSC); - writel(fwimsc, nmk_chip->addr + NMK_GPIO_FWIMSC); - } -} - -static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset, - pin_cfg_t cfg, bool sleep, unsigned int *slpmregs) -{ - static const char *afnames[] = { - [NMK_GPIO_ALT_GPIO] = "GPIO", - [NMK_GPIO_ALT_A] = "A", - [NMK_GPIO_ALT_B] = "B", - [NMK_GPIO_ALT_C] = "C" - }; - static const char *pullnames[] = { - [NMK_GPIO_PULL_NONE] = "none", - [NMK_GPIO_PULL_UP] = "up", - [NMK_GPIO_PULL_DOWN] = "down", - [3] /* illegal */ = "??" - }; - static const char *slpmnames[] = { - [NMK_GPIO_SLPM_INPUT] = "input/wakeup", - [NMK_GPIO_SLPM_NOCHANGE] = "no-change/no-wakeup", - }; - - int pin = PIN_NUM(cfg); - int pull = PIN_PULL(cfg); - int af = PIN_ALT(cfg); - int slpm = PIN_SLPM(cfg); - int output = PIN_DIR(cfg); - int val = PIN_VAL(cfg); - bool glitch = af == NMK_GPIO_ALT_C; - - dev_dbg(nmk_chip->chip.dev, "pin %d [%#lx]: af %s, pull %s, slpm %s (%s%s)\n", - pin, cfg, afnames[af], pullnames[pull], slpmnames[slpm], - output ? "output " : "input", - output ? (val ? "high" : "low") : ""); - - if (sleep) { - int slpm_pull = PIN_SLPM_PULL(cfg); - int slpm_output = PIN_SLPM_DIR(cfg); - int slpm_val = PIN_SLPM_VAL(cfg); - - af = NMK_GPIO_ALT_GPIO; - - /* - * The SLPM_* values are normal values + 1 to allow zero to - * mean "same as normal". - */ - if (slpm_pull) - pull = slpm_pull - 1; - if (slpm_output) - output = slpm_output - 1; - if (slpm_val) - val = slpm_val - 1; - - dev_dbg(nmk_chip->chip.dev, "pin %d: sleep pull %s, dir %s, val %s\n", - pin, - slpm_pull ? pullnames[pull] : "same", - slpm_output ? (output ? "output" : "input") : "same", - slpm_val ? (val ? "high" : "low") : "same"); - } - - if (output) - __nmk_gpio_make_output(nmk_chip, offset, val); - else { - __nmk_gpio_make_input(nmk_chip, offset); - __nmk_gpio_set_pull(nmk_chip, offset, pull); - } - - /* - * If we've backed up the SLPM registers (glitch workaround), modify - * the backups since they will be restored. - */ - if (slpmregs) { - if (slpm == NMK_GPIO_SLPM_NOCHANGE) - slpmregs[nmk_chip->bank] |= BIT(offset); - else - slpmregs[nmk_chip->bank] &= ~BIT(offset); - } else - __nmk_gpio_set_slpm(nmk_chip, offset, slpm); - - __nmk_gpio_set_mode_safe(nmk_chip, offset, af, glitch); -} - -/* - * Safe sequence used to switch IOs between GPIO and Alternate-C mode: - * - Save SLPM registers - * - Set SLPM=0 for the IOs you want to switch and others to 1 - * - Configure the GPIO registers for the IOs that are being switched - * - Set IOFORCE=1 - * - Modify the AFLSA/B registers for the IOs that are being switched - * - Set IOFORCE=0 - * - Restore SLPM registers - * - Any spurious wake up event during switch sequence to be ignored and - * cleared - */ -static void nmk_gpio_glitch_slpm_init(unsigned int *slpm) -{ - int i; - - for (i = 0; i < NUM_BANKS; i++) { - struct nmk_gpio_chip *chip = nmk_gpio_chips[i]; - unsigned int temp = slpm[i]; - - if (!chip) - break; - - slpm[i] = readl(chip->addr + NMK_GPIO_SLPC); - writel(temp, chip->addr + NMK_GPIO_SLPC); - } -} - -static void nmk_gpio_glitch_slpm_restore(unsigned int *slpm) -{ - int i; - - for (i = 0; i < NUM_BANKS; i++) { - struct nmk_gpio_chip *chip = nmk_gpio_chips[i]; - - if (!chip) - break; - - writel(slpm[i], chip->addr + NMK_GPIO_SLPC); - } -} - -static int __nmk_config_pins(pin_cfg_t *cfgs, int num, bool sleep) -{ - static unsigned int slpm[NUM_BANKS]; - unsigned long flags; - bool glitch = false; - int ret = 0; - int i; - - for (i = 0; i < num; i++) { - if (PIN_ALT(cfgs[i]) == NMK_GPIO_ALT_C) { - glitch = true; - break; - } - } - - spin_lock_irqsave(&nmk_gpio_slpm_lock, flags); - - if (glitch) { - memset(slpm, 0xff, sizeof(slpm)); - - for (i = 0; i < num; i++) { - int pin = PIN_NUM(cfgs[i]); - int offset = pin % NMK_GPIO_PER_CHIP; - - if (PIN_ALT(cfgs[i]) == NMK_GPIO_ALT_C) - slpm[pin / NMK_GPIO_PER_CHIP] &= ~BIT(offset); - } - - nmk_gpio_glitch_slpm_init(slpm); - } - - for (i = 0; i < num; i++) { - struct nmk_gpio_chip *nmk_chip; - int pin = PIN_NUM(cfgs[i]); - - nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(pin)); - if (!nmk_chip) { - ret = -EINVAL; - break; - } - - spin_lock(&nmk_chip->lock); - __nmk_config_pin(nmk_chip, pin - nmk_chip->chip.base, - cfgs[i], sleep, glitch ? slpm : NULL); - spin_unlock(&nmk_chip->lock); - } - - if (glitch) - nmk_gpio_glitch_slpm_restore(slpm); - - spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags); - - return ret; -} - -/** - * nmk_config_pin - configure a pin's mux attributes - * @cfg: pin confguration - * - * Configures a pin's mode (alternate function or GPIO), its pull up status, - * and its sleep mode based on the specified configuration. The @cfg is - * usually one of the SoC specific macros defined in mach/<soc>-pins.h. These - * are constructed using, and can be further enhanced with, the macros in - * plat/pincfg.h. - * - * If a pin's mode is set to GPIO, it is configured as an input to avoid - * side-effects. The gpio can be manipulated later using standard GPIO API - * calls. - */ -int nmk_config_pin(pin_cfg_t cfg, bool sleep) -{ - return __nmk_config_pins(&cfg, 1, sleep); -} -EXPORT_SYMBOL(nmk_config_pin); - -/** - * nmk_config_pins - configure several pins at once - * @cfgs: array of pin configurations - * @num: number of elments in the array - * - * Configures several pins using nmk_config_pin(). Refer to that function for - * further information. - */ -int nmk_config_pins(pin_cfg_t *cfgs, int num) -{ - return __nmk_config_pins(cfgs, num, false); -} -EXPORT_SYMBOL(nmk_config_pins); - -int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num) -{ - return __nmk_config_pins(cfgs, num, true); -} -EXPORT_SYMBOL(nmk_config_pins_sleep); - -/** - * nmk_gpio_set_slpm() - configure the sleep mode of a pin - * @gpio: pin number - * @mode: NMK_GPIO_SLPM_INPUT or NMK_GPIO_SLPM_NOCHANGE, - * - * Sets the sleep mode of a pin. If @mode is NMK_GPIO_SLPM_INPUT, the pin is - * changed to an input (with pullup/down enabled) in sleep and deep sleep. If - * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was - * configured even when in sleep and deep sleep. - * - * On DB8500v2 onwards, this setting loses the previous meaning and instead - * indicates if wakeup detection is enabled on the pin. Note that - * enable_irq_wake() will automatically enable wakeup detection. - */ -int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode) -{ - struct nmk_gpio_chip *nmk_chip; - unsigned long flags; - - nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); - if (!nmk_chip) - return -EINVAL; - - spin_lock_irqsave(&nmk_gpio_slpm_lock, flags); - spin_lock(&nmk_chip->lock); - - __nmk_gpio_set_slpm(nmk_chip, gpio - nmk_chip->chip.base, mode); - - spin_unlock(&nmk_chip->lock); - spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags); - - return 0; -} - -/** - * nmk_gpio_set_pull() - enable/disable pull up/down on a gpio - * @gpio: pin number - * @pull: one of NMK_GPIO_PULL_DOWN, NMK_GPIO_PULL_UP, and NMK_GPIO_PULL_NONE - * - * Enables/disables pull up/down on a specified pin. This only takes effect if - * the pin is configured as an input (either explicitly or by the alternate - * function). - * - * NOTE: If enabling the pull up/down, the caller must ensure that the GPIO is - * configured as an input. Otherwise, due to the way the controller registers - * work, this function will change the value output on the pin. - */ -int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull) -{ - struct nmk_gpio_chip *nmk_chip; - unsigned long flags; - - nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); - if (!nmk_chip) - return -EINVAL; - - spin_lock_irqsave(&nmk_chip->lock, flags); - __nmk_gpio_set_pull(nmk_chip, gpio - nmk_chip->chip.base, pull); - spin_unlock_irqrestore(&nmk_chip->lock, flags); - - return 0; -} - -/* Mode functions */ -/** - * nmk_gpio_set_mode() - set the mux mode of a gpio pin - * @gpio: pin number - * @gpio_mode: one of NMK_GPIO_ALT_GPIO, NMK_GPIO_ALT_A, - * NMK_GPIO_ALT_B, and NMK_GPIO_ALT_C - * - * Sets the mode of the specified pin to one of the alternate functions or - * plain GPIO. - */ -int nmk_gpio_set_mode(int gpio, int gpio_mode) -{ - struct nmk_gpio_chip *nmk_chip; - unsigned long flags; - - nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); - if (!nmk_chip) - return -EINVAL; - - spin_lock_irqsave(&nmk_chip->lock, flags); - __nmk_gpio_set_mode(nmk_chip, gpio - nmk_chip->chip.base, gpio_mode); - spin_unlock_irqrestore(&nmk_chip->lock, flags); - - return 0; -} -EXPORT_SYMBOL(nmk_gpio_set_mode); - -int nmk_gpio_get_mode(int gpio) -{ - struct nmk_gpio_chip *nmk_chip; - u32 afunc, bfunc, bit; - - nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); - if (!nmk_chip) - return -EINVAL; - - bit = 1 << (gpio - nmk_chip->chip.base); - - afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit; - bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit; - - return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0); -} -EXPORT_SYMBOL(nmk_gpio_get_mode); - - -/* IRQ functions */ -static inline int nmk_gpio_get_bitmask(int gpio) -{ - return 1 << (gpio % 32); -} - -static void nmk_gpio_irq_ack(struct irq_data *d) -{ - int gpio; - struct nmk_gpio_chip *nmk_chip; - - gpio = NOMADIK_IRQ_TO_GPIO(d->irq); - nmk_chip = irq_data_get_irq_chip_data(d); - if (!nmk_chip) - return; - writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC); -} - -enum nmk_gpio_irq_type { - NORMAL, - WAKE, -}; - -static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip, - int gpio, enum nmk_gpio_irq_type which, - bool enable) -{ - u32 rimsc = which == WAKE ? NMK_GPIO_RWIMSC : NMK_GPIO_RIMSC; - u32 fimsc = which == WAKE ? NMK_GPIO_FWIMSC : NMK_GPIO_FIMSC; - u32 bitmask = nmk_gpio_get_bitmask(gpio); - u32 reg; - - /* we must individually set/clear the two edges */ - if (nmk_chip->edge_rising & bitmask) { - reg = readl(nmk_chip->addr + rimsc); - if (enable) - reg |= bitmask; - else - reg &= ~bitmask; - writel(reg, nmk_chip->addr + rimsc); - } - if (nmk_chip->edge_falling & bitmask) { - reg = readl(nmk_chip->addr + fimsc); - if (enable) - reg |= bitmask; - else - reg &= ~bitmask; - writel(reg, nmk_chip->addr + fimsc); - } -} - -static void __nmk_gpio_set_wake(struct nmk_gpio_chip *nmk_chip, - int gpio, bool on) -{ - __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on); -} - -static int nmk_gpio_irq_maskunmask(struct irq_data *d, bool enable) -{ - int gpio; - struct nmk_gpio_chip *nmk_chip; - unsigned long flags; - u32 bitmask; - - gpio = NOMADIK_IRQ_TO_GPIO(d->irq); - nmk_chip = irq_data_get_irq_chip_data(d); - bitmask = nmk_gpio_get_bitmask(gpio); - if (!nmk_chip) - return -EINVAL; - - if (enable) - nmk_chip->enabled |= bitmask; - else - nmk_chip->enabled &= ~bitmask; - - spin_lock_irqsave(&nmk_gpio_slpm_lock, flags); - spin_lock(&nmk_chip->lock); - - __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, enable); - - if (!(nmk_chip->real_wake & bitmask)) - __nmk_gpio_set_wake(nmk_chip, gpio, enable); - - spin_unlock(&nmk_chip->lock); - spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags); - - return 0; -} - -static void nmk_gpio_irq_mask(struct irq_data *d) -{ - nmk_gpio_irq_maskunmask(d, false); -} - -static void nmk_gpio_irq_unmask(struct irq_data *d) -{ - nmk_gpio_irq_maskunmask(d, true); -} - -static int nmk_gpio_irq_set_wake(struct irq_data *d, unsigned int on) -{ - struct nmk_gpio_chip *nmk_chip; - unsigned long flags; - u32 bitmask; - int gpio; - - gpio = NOMADIK_IRQ_TO_GPIO(d->irq); - nmk_chip = irq_data_get_irq_chip_data(d); - if (!nmk_chip) - return -EINVAL; - bitmask = nmk_gpio_get_bitmask(gpio); - - spin_lock_irqsave(&nmk_gpio_slpm_lock, flags); - spin_lock(&nmk_chip->lock); - - if (!(nmk_chip->enabled & bitmask)) - __nmk_gpio_set_wake(nmk_chip, gpio, on); - - if (on) - nmk_chip->real_wake |= bitmask; - else - nmk_chip->real_wake &= ~bitmask; - - spin_unlock(&nmk_chip->lock); - spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags); - - return 0; -} - -static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type) -{ - bool enabled, wake = irqd_is_wakeup_set(d); - int gpio; - struct nmk_gpio_chip *nmk_chip; - unsigned long flags; - u32 bitmask; - - gpio = NOMADIK_IRQ_TO_GPIO(d->irq); - nmk_chip = irq_data_get_irq_chip_data(d); - bitmask = nmk_gpio_get_bitmask(gpio); - if (!nmk_chip) - return -EINVAL; - - if (type & IRQ_TYPE_LEVEL_HIGH) - return -EINVAL; - if (type & IRQ_TYPE_LEVEL_LOW) - return -EINVAL; - - enabled = nmk_chip->enabled & bitmask; - - spin_lock_irqsave(&nmk_chip->lock, flags); - - if (enabled) - __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, false); - - if (enabled || wake) - __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, false); - - nmk_chip->edge_rising &= ~bitmask; - if (type & IRQ_TYPE_EDGE_RISING) - nmk_chip->edge_rising |= bitmask; - - nmk_chip->edge_falling &= ~bitmask; - if (type & IRQ_TYPE_EDGE_FALLING) - nmk_chip->edge_falling |= bitmask; - - if (enabled) - __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, true); - - if (enabled || wake) - __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, true); - - spin_unlock_irqrestore(&nmk_chip->lock, flags); - - return 0; -} - -static struct irq_chip nmk_gpio_irq_chip = { - .name = "Nomadik-GPIO", - .irq_ack = nmk_gpio_irq_ack, - .irq_mask = nmk_gpio_irq_mask, - .irq_unmask = nmk_gpio_irq_unmask, - .irq_set_type = nmk_gpio_irq_set_type, - .irq_set_wake = nmk_gpio_irq_set_wake, -}; - -static void __nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc, - u32 status) -{ - struct nmk_gpio_chip *nmk_chip; - struct irq_chip *host_chip = irq_get_chip(irq); - unsigned int first_irq; - - chained_irq_enter(host_chip, desc); - - nmk_chip = irq_get_handler_data(irq); - first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base); - while (status) { - int bit = __ffs(status); - - generic_handle_irq(first_irq + bit); - status &= ~BIT(bit); - } - - chained_irq_exit(host_chip, desc); -} - -static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - struct nmk_gpio_chip *nmk_chip = irq_get_handler_data(irq); - u32 status = readl(nmk_chip->addr + NMK_GPIO_IS); - - __nmk_gpio_irq_handler(irq, desc, status); -} - -static void nmk_gpio_secondary_irq_handler(unsigned int irq, - struct irq_desc *desc) -{ - struct nmk_gpio_chip *nmk_chip = irq_get_handler_data(irq); - u32 status = nmk_chip->get_secondary_status(nmk_chip->bank); - - __nmk_gpio_irq_handler(irq, desc, status); -} - -static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip) -{ - unsigned int first_irq; - int i; - - first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base); - for (i = first_irq; i < first_irq + nmk_chip->chip.ngpio; i++) { - irq_set_chip_and_handler(i, &nmk_gpio_irq_chip, - handle_edge_irq); - set_irq_flags(i, IRQF_VALID); - irq_set_chip_data(i, nmk_chip); - irq_set_irq_type(i, IRQ_TYPE_EDGE_FALLING); - } - - irq_set_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler); - irq_set_handler_data(nmk_chip->parent_irq, nmk_chip); - - if (nmk_chip->secondary_parent_irq >= 0) { - irq_set_chained_handler(nmk_chip->secondary_parent_irq, - nmk_gpio_secondary_irq_handler); - irq_set_handler_data(nmk_chip->secondary_parent_irq, nmk_chip); - } - - return 0; -} - -/* I/O Functions */ -static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset) -{ - struct nmk_gpio_chip *nmk_chip = - container_of(chip, struct nmk_gpio_chip, chip); - - writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC); - return 0; -} - -static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset) -{ - struct nmk_gpio_chip *nmk_chip = - container_of(chip, struct nmk_gpio_chip, chip); - u32 bit = 1 << offset; - - return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0; -} - -static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset, - int val) -{ - struct nmk_gpio_chip *nmk_chip = - container_of(chip, struct nmk_gpio_chip, chip); - - __nmk_gpio_set_output(nmk_chip, offset, val); -} - -static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset, - int val) -{ - struct nmk_gpio_chip *nmk_chip = - container_of(chip, struct nmk_gpio_chip, chip); - - __nmk_gpio_make_output(nmk_chip, offset, val); - - return 0; -} - -static int nmk_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - struct nmk_gpio_chip *nmk_chip = - container_of(chip, struct nmk_gpio_chip, chip); - - return NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base) + offset; -} - -#ifdef CONFIG_DEBUG_FS - -#include <linux/seq_file.h> - -static void nmk_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) -{ - int mode; - unsigned i; - unsigned gpio = chip->base; - int is_out; - struct nmk_gpio_chip *nmk_chip = - container_of(chip, struct nmk_gpio_chip, chip); - const char *modes[] = { - [NMK_GPIO_ALT_GPIO] = "gpio", - [NMK_GPIO_ALT_A] = "altA", - [NMK_GPIO_ALT_B] = "altB", - [NMK_GPIO_ALT_C] = "altC", - }; - - for (i = 0; i < chip->ngpio; i++, gpio++) { - const char *label = gpiochip_is_requested(chip, i); - bool pull; - u32 bit = 1 << i; - - if (!label) - continue; - - is_out = readl(nmk_chip->addr + NMK_GPIO_DIR) & bit; - pull = !(readl(nmk_chip->addr + NMK_GPIO_PDIS) & bit); - mode = nmk_gpio_get_mode(gpio); - seq_printf(s, " gpio-%-3d (%-20.20s) %s %s %s %s", - gpio, label, - is_out ? "out" : "in ", - chip->get - ? (chip->get(chip, i) ? "hi" : "lo") - : "? ", - (mode < 0) ? "unknown" : modes[mode], - pull ? "pull" : "none"); - seq_printf(s, "\n"); - } -} - -#else -#define nmk_gpio_dbg_show NULL -#endif - -/* This structure is replicated for each GPIO block allocated at probe time */ -static struct gpio_chip nmk_gpio_template = { - .direction_input = nmk_gpio_make_input, - .get = nmk_gpio_get_input, - .direction_output = nmk_gpio_make_output, - .set = nmk_gpio_set_output, - .to_irq = nmk_gpio_to_irq, - .dbg_show = nmk_gpio_dbg_show, - .can_sleep = 0, -}; - -/* - * Called from the suspend/resume path to only keep the real wakeup interrupts - * (those that have had set_irq_wake() called on them) as wakeup interrupts, - * and not the rest of the interrupts which we needed to have as wakeups for - * cpuidle. - * - * PM ops are not used since this needs to be done at the end, after all the - * other drivers are done with their suspend callbacks. - */ -void nmk_gpio_wakeups_suspend(void) -{ - int i; - - for (i = 0; i < NUM_BANKS; i++) { - struct nmk_gpio_chip *chip = nmk_gpio_chips[i]; - - if (!chip) - break; - - chip->rwimsc = readl(chip->addr + NMK_GPIO_RWIMSC); - chip->fwimsc = readl(chip->addr + NMK_GPIO_FWIMSC); - - writel(chip->rwimsc & chip->real_wake, - chip->addr + NMK_GPIO_RWIMSC); - writel(chip->fwimsc & chip->real_wake, - chip->addr + NMK_GPIO_FWIMSC); - - if (cpu_is_u8500v2()) { - chip->slpm = readl(chip->addr + NMK_GPIO_SLPC); - - /* 0 -> wakeup enable */ - writel(~chip->real_wake, chip->addr + NMK_GPIO_SLPC); - } - } -} - -void nmk_gpio_wakeups_resume(void) -{ - int i; - - for (i = 0; i < NUM_BANKS; i++) { - struct nmk_gpio_chip *chip = nmk_gpio_chips[i]; - - if (!chip) - break; - - writel(chip->rwimsc, chip->addr + NMK_GPIO_RWIMSC); - writel(chip->fwimsc, chip->addr + NMK_GPIO_FWIMSC); - - if (cpu_is_u8500v2()) - writel(chip->slpm, chip->addr + NMK_GPIO_SLPC); - } -} - -static int __devinit nmk_gpio_probe(struct platform_device *dev) -{ - struct nmk_gpio_platform_data *pdata = dev->dev.platform_data; - struct nmk_gpio_chip *nmk_chip; - struct gpio_chip *chip; - struct resource *res; - struct clk *clk; - int secondary_irq; - int irq; - int ret; - - if (!pdata) - return -ENODEV; - - res = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!res) { - ret = -ENOENT; - goto out; - } - - irq = platform_get_irq(dev, 0); - if (irq < 0) { - ret = irq; - goto out; - } - - secondary_irq = platform_get_irq(dev, 1); - if (secondary_irq >= 0 && !pdata->get_secondary_status) { - ret = -EINVAL; - goto out; - } - - if (request_mem_region(res->start, resource_size(res), - dev_name(&dev->dev)) == NULL) { - ret = -EBUSY; - goto out; - } - - clk = clk_get(&dev->dev, NULL); - if (IS_ERR(clk)) { - ret = PTR_ERR(clk); - goto out_release; - } - - clk_enable(clk); - - nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL); - if (!nmk_chip) { - ret = -ENOMEM; - goto out_clk; - } - /* - * The virt address in nmk_chip->addr is in the nomadik register space, - * so we can simply convert the resource address, without remapping - */ - nmk_chip->bank = dev->id; - nmk_chip->clk = clk; - nmk_chip->addr = io_p2v(res->start); - nmk_chip->chip = nmk_gpio_template; - nmk_chip->parent_irq = irq; - nmk_chip->secondary_parent_irq = secondary_irq; - nmk_chip->get_secondary_status = pdata->get_secondary_status; - nmk_chip->set_ioforce = pdata->set_ioforce; - spin_lock_init(&nmk_chip->lock); - - chip = &nmk_chip->chip; - chip->base = pdata->first_gpio; - chip->ngpio = pdata->num_gpio; - chip->label = pdata->name ?: dev_name(&dev->dev); - chip->dev = &dev->dev; - chip->owner = THIS_MODULE; - - ret = gpiochip_add(&nmk_chip->chip); - if (ret) - goto out_free; - - BUG_ON(nmk_chip->bank >= ARRAY_SIZE(nmk_gpio_chips)); - - nmk_gpio_chips[nmk_chip->bank] = nmk_chip; - platform_set_drvdata(dev, nmk_chip); - - nmk_gpio_init_irq(nmk_chip); - - dev_info(&dev->dev, "Bits %i-%i at address %p\n", - nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr); - return 0; - -out_free: - kfree(nmk_chip); -out_clk: - clk_disable(clk); - clk_put(clk); -out_release: - release_mem_region(res->start, resource_size(res)); -out: - dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret, - pdata->first_gpio, pdata->first_gpio+31); - return ret; -} - -static struct platform_driver nmk_gpio_driver = { - .driver = { - .owner = THIS_MODULE, - .name = "gpio", - }, - .probe = nmk_gpio_probe, -}; - -static int __init nmk_gpio_init(void) -{ - return platform_driver_register(&nmk_gpio_driver); -} - -core_initcall(nmk_gpio_init); - -MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini"); -MODULE_DESCRIPTION("Nomadik GPIO Driver"); -MODULE_LICENSE("GPL"); - - diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h index 1b9f6f0843d..ea19a5b2f22 100644 --- a/arch/arm/plat-nomadik/include/plat/gpio.h +++ b/arch/arm/plat-nomadik/include/plat/gpio.h @@ -78,6 +78,8 @@ extern int nmk_gpio_get_mode(int gpio); extern void nmk_gpio_wakeups_suspend(void); extern void nmk_gpio_wakeups_resume(void); +extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up); + /* * Platform data to register a block: only the initial gpio/irq number. */ diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index a4a12859fdd..f0233e6abcd 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \ +obj-y := common.o sram.o clock.o devices.o dma.o mux.o \ usb.o fb.o io.o counter_32k.o obj-m := obj-n := diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c deleted file mode 100644 index efb86939019..00000000000 --- a/arch/arm/plat-omap/gpio.c +++ /dev/null @@ -1,2112 +0,0 @@ -/* - * linux/arch/arm/plat-omap/gpio.c - * - * Support functions for OMAP GPIO - * - * Copyright (C) 2003-2005 Nokia Corporation - * Written by Juha Yrjölä <juha.yrjola@nokia.com> - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/syscore_ops.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/pm_runtime.h> - -#include <mach/hardware.h> -#include <asm/irq.h> -#include <mach/irqs.h> -#include <mach/gpio.h> -#include <asm/mach/irq.h> - -/* - * OMAP1510 GPIO registers - */ -#define OMAP1510_GPIO_DATA_INPUT 0x00 -#define OMAP1510_GPIO_DATA_OUTPUT 0x04 -#define OMAP1510_GPIO_DIR_CONTROL 0x08 -#define OMAP1510_GPIO_INT_CONTROL 0x0c -#define OMAP1510_GPIO_INT_MASK 0x10 -#define OMAP1510_GPIO_INT_STATUS 0x14 -#define OMAP1510_GPIO_PIN_CONTROL 0x18 - -#define OMAP1510_IH_GPIO_BASE 64 - -/* - * OMAP1610 specific GPIO registers - */ -#define OMAP1610_GPIO_REVISION 0x0000 -#define OMAP1610_GPIO_SYSCONFIG 0x0010 -#define OMAP1610_GPIO_SYSSTATUS 0x0014 -#define OMAP1610_GPIO_IRQSTATUS1 0x0018 -#define OMAP1610_GPIO_IRQENABLE1 0x001c -#define OMAP1610_GPIO_WAKEUPENABLE 0x0028 -#define OMAP1610_GPIO_DATAIN 0x002c -#define OMAP1610_GPIO_DATAOUT 0x0030 -#define OMAP1610_GPIO_DIRECTION 0x0034 -#define OMAP1610_GPIO_EDGE_CTRL1 0x0038 -#define OMAP1610_GPIO_EDGE_CTRL2 0x003c -#define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c -#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8 -#define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0 -#define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc -#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8 -#define OMAP1610_GPIO_SET_DATAOUT 0x00f0 - -/* - * OMAP7XX specific GPIO registers - */ -#define OMAP7XX_GPIO_DATA_INPUT 0x00 -#define OMAP7XX_GPIO_DATA_OUTPUT 0x04 -#define OMAP7XX_GPIO_DIR_CONTROL 0x08 -#define OMAP7XX_GPIO_INT_CONTROL 0x0c -#define OMAP7XX_GPIO_INT_MASK 0x10 -#define OMAP7XX_GPIO_INT_STATUS 0x14 - -/* - * omap2+ specific GPIO registers - */ -#define OMAP24XX_GPIO_REVISION 0x0000 -#define OMAP24XX_GPIO_IRQSTATUS1 0x0018 -#define OMAP24XX_GPIO_IRQSTATUS2 0x0028 -#define OMAP24XX_GPIO_IRQENABLE2 0x002c -#define OMAP24XX_GPIO_IRQENABLE1 0x001c -#define OMAP24XX_GPIO_WAKE_EN 0x0020 -#define OMAP24XX_GPIO_CTRL 0x0030 -#define OMAP24XX_GPIO_OE 0x0034 -#define OMAP24XX_GPIO_DATAIN 0x0038 -#define OMAP24XX_GPIO_DATAOUT 0x003c -#define OMAP24XX_GPIO_LEVELDETECT0 0x0040 -#define OMAP24XX_GPIO_LEVELDETECT1 0x0044 -#define OMAP24XX_GPIO_RISINGDETECT 0x0048 -#define OMAP24XX_GPIO_FALLINGDETECT 0x004c -#define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050 -#define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054 -#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060 -#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064 -#define OMAP24XX_GPIO_CLEARWKUENA 0x0080 -#define OMAP24XX_GPIO_SETWKUENA 0x0084 -#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090 -#define OMAP24XX_GPIO_SETDATAOUT 0x0094 - -#define OMAP4_GPIO_REVISION 0x0000 -#define OMAP4_GPIO_EOI 0x0020 -#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024 -#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028 -#define OMAP4_GPIO_IRQSTATUS0 0x002c -#define OMAP4_GPIO_IRQSTATUS1 0x0030 -#define OMAP4_GPIO_IRQSTATUSSET0 0x0034 -#define OMAP4_GPIO_IRQSTATUSSET1 0x0038 -#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c -#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040 -#define OMAP4_GPIO_IRQWAKEN0 0x0044 -#define OMAP4_GPIO_IRQWAKEN1 0x0048 -#define OMAP4_GPIO_IRQENABLE1 0x011c -#define OMAP4_GPIO_WAKE_EN 0x0120 -#define OMAP4_GPIO_IRQSTATUS2 0x0128 -#define OMAP4_GPIO_IRQENABLE2 0x012c -#define OMAP4_GPIO_CTRL 0x0130 -#define OMAP4_GPIO_OE 0x0134 -#define OMAP4_GPIO_DATAIN 0x0138 -#define OMAP4_GPIO_DATAOUT 0x013c -#define OMAP4_GPIO_LEVELDETECT0 0x0140 -#define OMAP4_GPIO_LEVELDETECT1 0x0144 -#define OMAP4_GPIO_RISINGDETECT 0x0148 -#define OMAP4_GPIO_FALLINGDETECT 0x014c -#define OMAP4_GPIO_DEBOUNCENABLE 0x0150 -#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154 -#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160 -#define OMAP4_GPIO_SETIRQENABLE1 0x0164 -#define OMAP4_GPIO_CLEARWKUENA 0x0180 -#define OMAP4_GPIO_SETWKUENA 0x0184 -#define OMAP4_GPIO_CLEARDATAOUT 0x0190 -#define OMAP4_GPIO_SETDATAOUT 0x0194 - -struct gpio_bank { - unsigned long pbase; - void __iomem *base; - u16 irq; - u16 virtual_irq_start; - int method; -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) - u32 suspend_wakeup; - u32 saved_wakeup; -#endif - u32 non_wakeup_gpios; - u32 enabled_non_wakeup_gpios; - - u32 saved_datain; - u32 saved_fallingdetect; - u32 saved_risingdetect; - u32 level_mask; - u32 toggle_mask; - spinlock_t lock; - struct gpio_chip chip; - struct clk *dbck; - u32 mod_usage; - u32 dbck_enable_mask; - struct device *dev; - bool dbck_flag; - int stride; -}; - -#ifdef CONFIG_ARCH_OMAP3 -struct omap3_gpio_regs { - u32 irqenable1; - u32 irqenable2; - u32 wake_en; - u32 ctrl; - u32 oe; - u32 leveldetect0; - u32 leveldetect1; - u32 risingdetect; - u32 fallingdetect; - u32 dataout; -}; - -static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS]; -#endif - -/* - * TODO: Cleanup gpio_bank usage as it is having information - * related to all instances of the device - */ -static struct gpio_bank *gpio_bank; - -static int bank_width; - -/* TODO: Analyze removing gpio_bank_count usage from driver code */ -int gpio_bank_count; - -static inline struct gpio_bank *get_gpio_bank(int gpio) -{ - if (cpu_is_omap15xx()) { - if (OMAP_GPIO_IS_MPUIO(gpio)) - return &gpio_bank[0]; - return &gpio_bank[1]; - } - if (cpu_is_omap16xx()) { - if (OMAP_GPIO_IS_MPUIO(gpio)) - return &gpio_bank[0]; - return &gpio_bank[1 + (gpio >> 4)]; - } - if (cpu_is_omap7xx()) { - if (OMAP_GPIO_IS_MPUIO(gpio)) - return &gpio_bank[0]; - return &gpio_bank[1 + (gpio >> 5)]; - } - if (cpu_is_omap24xx()) - return &gpio_bank[gpio >> 5]; - if (cpu_is_omap34xx() || cpu_is_omap44xx()) - return &gpio_bank[gpio >> 5]; - BUG(); - return NULL; -} - -static inline int get_gpio_index(int gpio) -{ - if (cpu_is_omap7xx()) - return gpio & 0x1f; - if (cpu_is_omap24xx()) - return gpio & 0x1f; - if (cpu_is_omap34xx() || cpu_is_omap44xx()) - return gpio & 0x1f; - return gpio & 0x0f; -} - -static inline int gpio_valid(int gpio) -{ - if (gpio < 0) - return -1; - if (cpu_class_is_omap1() && OMAP_GPIO_IS_MPUIO(gpio)) { - if (gpio >= OMAP_MAX_GPIO_LINES + 16) - return -1; - return 0; - } - if (cpu_is_omap15xx() && gpio < 16) - return 0; - if ((cpu_is_omap16xx()) && gpio < 64) - return 0; - if (cpu_is_omap7xx() && gpio < 192) - return 0; - if (cpu_is_omap2420() && gpio < 128) - return 0; - if (cpu_is_omap2430() && gpio < 160) - return 0; - if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192) - return 0; - return -1; -} - -static int check_gpio(int gpio) -{ - if (unlikely(gpio_valid(gpio) < 0)) { - printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio); - dump_stack(); - return -1; - } - return 0; -} - -static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) -{ - void __iomem *reg = bank->base; - u32 l; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_IO_CNTL / bank->stride; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DIR_CONTROL; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DIRECTION; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DIR_CONTROL; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_OE; - break; -#endif -#if defined(CONFIG_ARCH_OMAP4) - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_OE; - break; -#endif - default: - WARN_ON(1); - return; - } - l = __raw_readl(reg); - if (is_input) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - __raw_writel(l, reg); -} - -static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) -{ - void __iomem *reg = bank->base; - u32 l = 0; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_OUTPUT / bank->stride; - l = __raw_readl(reg); - if (enable) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DATA_OUTPUT; - l = __raw_readl(reg); - if (enable) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - if (enable) - reg += OMAP1610_GPIO_SET_DATAOUT; - else - reg += OMAP1610_GPIO_CLEAR_DATAOUT; - l = 1 << gpio; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DATA_OUTPUT; - l = __raw_readl(reg); - if (enable) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - if (enable) - reg += OMAP24XX_GPIO_SETDATAOUT; - else - reg += OMAP24XX_GPIO_CLEARDATAOUT; - l = 1 << gpio; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - if (enable) - reg += OMAP4_GPIO_SETDATAOUT; - else - reg += OMAP4_GPIO_CLEARDATAOUT; - l = 1 << gpio; - break; -#endif - default: - WARN_ON(1); - return; - } - __raw_writel(l, reg); -} - -static int _get_gpio_datain(struct gpio_bank *bank, int gpio) -{ - void __iomem *reg; - - if (check_gpio(gpio) < 0) - return -EINVAL; - reg = bank->base; - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_INPUT_LATCH / bank->stride; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DATA_INPUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DATAIN; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DATA_INPUT; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_DATAIN; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_DATAIN; - break; -#endif - default: - return -EINVAL; - } - return (__raw_readl(reg) - & (1 << get_gpio_index(gpio))) != 0; -} - -static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) -{ - void __iomem *reg; - - if (check_gpio(gpio) < 0) - return -EINVAL; - reg = bank->base; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_OUTPUT / bank->stride; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DATA_OUTPUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DATAOUT; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DATA_OUTPUT; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_DATAOUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_DATAOUT; - break; -#endif - default: - return -EINVAL; - } - - return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0; -} - -#define MOD_REG_BIT(reg, bit_mask, set) \ -do { \ - int l = __raw_readl(base + reg); \ - if (set) l |= bit_mask; \ - else l &= ~bit_mask; \ - __raw_writel(l, base + reg); \ -} while(0) - -/** - * _set_gpio_debounce - low level gpio debounce time - * @bank: the gpio bank we're acting upon - * @gpio: the gpio number on this @gpio - * @debounce: debounce time to use - * - * OMAP's debounce time is in 31us steps so we need - * to convert and round up to the closest unit. - */ -static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, - unsigned debounce) -{ - void __iomem *reg = bank->base; - u32 val; - u32 l; - - if (!bank->dbck_flag) - return; - - if (debounce < 32) - debounce = 0x01; - else if (debounce > 7936) - debounce = 0xff; - else - debounce = (debounce / 0x1f) - 1; - - l = 1 << get_gpio_index(gpio); - - if (bank->method == METHOD_GPIO_44XX) - reg += OMAP4_GPIO_DEBOUNCINGTIME; - else - reg += OMAP24XX_GPIO_DEBOUNCE_VAL; - - __raw_writel(debounce, reg); - - reg = bank->base; - if (bank->method == METHOD_GPIO_44XX) - reg += OMAP4_GPIO_DEBOUNCENABLE; - else - reg += OMAP24XX_GPIO_DEBOUNCE_EN; - - val = __raw_readl(reg); - - if (debounce) { - val |= l; - clk_enable(bank->dbck); - } else { - val &= ~l; - clk_disable(bank->dbck); - } - bank->dbck_enable_mask = val; - - __raw_writel(val, reg); -} - -#ifdef CONFIG_ARCH_OMAP2PLUS -static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, - int trigger) -{ - void __iomem *base = bank->base; - u32 gpio_bit = 1 << gpio; - u32 val; - - if (cpu_is_omap44xx()) { - MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQ_TYPE_LEVEL_LOW); - MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQ_TYPE_LEVEL_HIGH); - MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_RISING); - MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_FALLING); - } else { - MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQ_TYPE_LEVEL_LOW); - MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQ_TYPE_LEVEL_HIGH); - MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_RISING); - MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_FALLING); - } - if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { - if (cpu_is_omap44xx()) { - if (trigger != 0) - __raw_writel(1 << gpio, bank->base+ - OMAP4_GPIO_IRQWAKEN0); - else { - val = __raw_readl(bank->base + - OMAP4_GPIO_IRQWAKEN0); - __raw_writel(val & (~(1 << gpio)), bank->base + - OMAP4_GPIO_IRQWAKEN0); - } - } else { - /* - * GPIO wakeup request can only be generated on edge - * transitions - */ - if (trigger & IRQ_TYPE_EDGE_BOTH) - __raw_writel(1 << gpio, bank->base - + OMAP24XX_GPIO_SETWKUENA); - else - __raw_writel(1 << gpio, bank->base - + OMAP24XX_GPIO_CLEARWKUENA); - } - } - /* This part needs to be executed always for OMAP34xx */ - if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) { - /* - * Log the edge gpio and manually trigger the IRQ - * after resume if the input level changes - * to avoid irq lost during PER RET/OFF mode - * Applies for omap2 non-wakeup gpio and all omap3 gpios - */ - if (trigger & IRQ_TYPE_EDGE_BOTH) - bank->enabled_non_wakeup_gpios |= gpio_bit; - else - bank->enabled_non_wakeup_gpios &= ~gpio_bit; - } - - if (cpu_is_omap44xx()) { - bank->level_mask = - __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) | - __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1); - } else { - bank->level_mask = - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) | - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); - } -} -#endif - -#ifdef CONFIG_ARCH_OMAP1 -/* - * This only applies to chips that can't do both rising and falling edge - * detection at once. For all other chips, this function is a noop. - */ -static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) -{ - void __iomem *reg = bank->base; - u32 l = 0; - - switch (bank->method) { - case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride; - break; -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_CONTROL; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_CONTROL; - break; -#endif - default: - return; - } - - l = __raw_readl(reg); - if ((l >> gpio) & 1) - l &= ~(1 << gpio); - else - l |= 1 << gpio; - - __raw_writel(l, reg); -} -#endif - -static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) -{ - void __iomem *reg = bank->base; - u32 l = 0; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride; - l = __raw_readl(reg); - if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) - bank->toggle_mask |= 1 << gpio; - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_CONTROL; - l = __raw_readl(reg); - if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) - bank->toggle_mask |= 1 << gpio; - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - if (gpio & 0x08) - reg += OMAP1610_GPIO_EDGE_CTRL2; - else - reg += OMAP1610_GPIO_EDGE_CTRL1; - gpio &= 0x07; - l = __raw_readl(reg); - l &= ~(3 << (gpio << 1)); - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 2 << (gpio << 1); - if (trigger & IRQ_TYPE_EDGE_FALLING) - l |= 1 << (gpio << 1); - if (trigger) - /* Enable wake-up during idle for dynamic tick */ - __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_SET_WAKEUPENA); - else - __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA); - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_CONTROL; - l = __raw_readl(reg); - if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) - bank->toggle_mask |= 1 << gpio; - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif -#ifdef CONFIG_ARCH_OMAP2PLUS - case METHOD_GPIO_24XX: - case METHOD_GPIO_44XX: - set_24xx_gpio_triggering(bank, gpio, trigger); - return 0; -#endif - default: - goto bad; - } - __raw_writel(l, reg); - return 0; -bad: - return -EINVAL; -} - -static int gpio_irq_type(struct irq_data *d, unsigned type) -{ - struct gpio_bank *bank; - unsigned gpio; - int retval; - unsigned long flags; - - if (!cpu_class_is_omap2() && d->irq > IH_MPUIO_BASE) - gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE); - else - gpio = d->irq - IH_GPIO_BASE; - - if (check_gpio(gpio) < 0) - return -EINVAL; - - if (type & ~IRQ_TYPE_SENSE_MASK) - return -EINVAL; - - /* OMAP1 allows only only edge triggering */ - if (!cpu_class_is_omap2() - && (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))) - return -EINVAL; - - bank = irq_data_get_irq_chip_data(d); - spin_lock_irqsave(&bank->lock, flags); - retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type); - spin_unlock_irqrestore(&bank->lock, flags); - - if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) - __irq_set_handler_locked(d->irq, handle_level_irq); - else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) - __irq_set_handler_locked(d->irq, handle_edge_irq); - - return retval; -} - -static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) -{ - void __iomem *reg = bank->base; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - /* MPUIO irqstatus is reset by reading the status register, - * so do nothing here */ - return; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_STATUS; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_IRQSTATUS1; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_STATUS; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_IRQSTATUS1; - break; -#endif -#if defined(CONFIG_ARCH_OMAP4) - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_IRQSTATUS0; - break; -#endif - default: - WARN_ON(1); - return; - } - __raw_writel(gpio_mask, reg); - - /* Workaround for clearing DSP GPIO interrupts to allow retention */ - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2; - else if (cpu_is_omap44xx()) - reg = bank->base + OMAP4_GPIO_IRQSTATUS1; - - if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) { - __raw_writel(gpio_mask, reg); - - /* Flush posted write for the irq status to avoid spurious interrupts */ - __raw_readl(reg); - } -} - -static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio) -{ - _clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio)); -} - -static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) -{ - void __iomem *reg = bank->base; - int inv = 0; - u32 l; - u32 mask; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride; - mask = 0xffff; - inv = 1; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_MASK; - mask = 0xffff; - inv = 1; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_IRQENABLE1; - mask = 0xffff; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_MASK; - mask = 0xffffffff; - inv = 1; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_IRQENABLE1; - mask = 0xffffffff; - break; -#endif -#if defined(CONFIG_ARCH_OMAP4) - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_IRQSTATUSSET0; - mask = 0xffffffff; - break; -#endif - default: - WARN_ON(1); - return 0; - } - - l = __raw_readl(reg); - if (inv) - l = ~l; - l &= mask; - return l; -} - -static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable) -{ - void __iomem *reg = bank->base; - u32 l; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride; - l = __raw_readl(reg); - if (enable) - l &= ~(gpio_mask); - else - l |= gpio_mask; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_MASK; - l = __raw_readl(reg); - if (enable) - l &= ~(gpio_mask); - else - l |= gpio_mask; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - if (enable) - reg += OMAP1610_GPIO_SET_IRQENABLE1; - else - reg += OMAP1610_GPIO_CLEAR_IRQENABLE1; - l = gpio_mask; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_MASK; - l = __raw_readl(reg); - if (enable) - l &= ~(gpio_mask); - else - l |= gpio_mask; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - if (enable) - reg += OMAP24XX_GPIO_SETIRQENABLE1; - else - reg += OMAP24XX_GPIO_CLEARIRQENABLE1; - l = gpio_mask; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - if (enable) - reg += OMAP4_GPIO_IRQSTATUSSET0; - else - reg += OMAP4_GPIO_IRQSTATUSCLR0; - l = gpio_mask; - break; -#endif - default: - WARN_ON(1); - return; - } - __raw_writel(l, reg); -} - -static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable) -{ - _enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable); -} - -/* - * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register. - * 1510 does not seem to have a wake-up register. If JTAG is connected - * to the target, system will wake up always on GPIO events. While - * system is running all registered GPIO interrupts need to have wake-up - * enabled. When system is suspended, only selected GPIO interrupts need - * to have wake-up enabled. - */ -static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) -{ - unsigned long uninitialized_var(flags); - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_MPUIO: - case METHOD_GPIO_1610: - spin_lock_irqsave(&bank->lock, flags); - if (enable) - bank->suspend_wakeup |= (1 << gpio); - else - bank->suspend_wakeup &= ~(1 << gpio); - spin_unlock_irqrestore(&bank->lock, flags); - return 0; -#endif -#ifdef CONFIG_ARCH_OMAP2PLUS - case METHOD_GPIO_24XX: - case METHOD_GPIO_44XX: - if (bank->non_wakeup_gpios & (1 << gpio)) { - printk(KERN_ERR "Unable to modify wakeup on " - "non-wakeup GPIO%d\n", - (bank - gpio_bank) * 32 + gpio); - return -EINVAL; - } - spin_lock_irqsave(&bank->lock, flags); - if (enable) - bank->suspend_wakeup |= (1 << gpio); - else - bank->suspend_wakeup &= ~(1 << gpio); - spin_unlock_irqrestore(&bank->lock, flags); - return 0; -#endif - default: - printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n", - bank->method); - return -EINVAL; - } -} - -static void _reset_gpio(struct gpio_bank *bank, int gpio) -{ - _set_gpio_direction(bank, get_gpio_index(gpio), 1); - _set_gpio_irqenable(bank, gpio, 0); - _clear_gpio_irqstatus(bank, gpio); - _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); -} - -/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ -static int gpio_wake_enable(struct irq_data *d, unsigned int enable) -{ - unsigned int gpio = d->irq - IH_GPIO_BASE; - struct gpio_bank *bank; - int retval; - - if (check_gpio(gpio) < 0) - return -ENODEV; - bank = irq_data_get_irq_chip_data(d); - retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable); - - return retval; -} - -static int omap_gpio_request(struct gpio_chip *chip, unsigned offset) -{ - struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip); - unsigned long flags; - - spin_lock_irqsave(&bank->lock, flags); - - /* Set trigger to none. You need to enable the desired trigger with - * request_irq() or set_irq_type(). - */ - _set_gpio_triggering(bank, offset, IRQ_TYPE_NONE); - -#ifdef CONFIG_ARCH_OMAP15XX - if (bank->method == METHOD_GPIO_1510) { - void __iomem *reg; - - /* Claim the pin for MPU */ - reg = bank->base + OMAP1510_GPIO_PIN_CONTROL; - __raw_writel(__raw_readl(reg) | (1 << offset), reg); - } -#endif - if (!cpu_class_is_omap1()) { - if (!bank->mod_usage) { - void __iomem *reg = bank->base; - u32 ctrl; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - reg += OMAP24XX_GPIO_CTRL; - else if (cpu_is_omap44xx()) - reg += OMAP4_GPIO_CTRL; - ctrl = __raw_readl(reg); - /* Module is enabled, clocks are not gated */ - ctrl &= 0xFFFFFFFE; - __raw_writel(ctrl, reg); - } - bank->mod_usage |= 1 << offset; - } - spin_unlock_irqrestore(&bank->lock, flags); - - return 0; -} - -static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) -{ - struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip); - unsigned long flags; - - spin_lock_irqsave(&bank->lock, flags); -#ifdef CONFIG_ARCH_OMAP16XX - if (bank->method == METHOD_GPIO_1610) { - /* Disable wake-up during idle for dynamic tick */ - void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; - __raw_writel(1 << offset, reg); - } -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - if (bank->method == METHOD_GPIO_24XX) { - /* Disable wake-up during idle for dynamic tick */ - void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA; - __raw_writel(1 << offset, reg); - } -#endif -#ifdef CONFIG_ARCH_OMAP4 - if (bank->method == METHOD_GPIO_44XX) { - /* Disable wake-up during idle for dynamic tick */ - void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0; - __raw_writel(1 << offset, reg); - } -#endif - if (!cpu_class_is_omap1()) { - bank->mod_usage &= ~(1 << offset); - if (!bank->mod_usage) { - void __iomem *reg = bank->base; - u32 ctrl; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - reg += OMAP24XX_GPIO_CTRL; - else if (cpu_is_omap44xx()) - reg += OMAP4_GPIO_CTRL; - ctrl = __raw_readl(reg); - /* Module is disabled, clocks are gated */ - ctrl |= 1; - __raw_writel(ctrl, reg); - } - } - _reset_gpio(bank, bank->chip.base + offset); - spin_unlock_irqrestore(&bank->lock, flags); -} - -/* - * We need to unmask the GPIO bank interrupt as soon as possible to - * avoid missing GPIO interrupts for other lines in the bank. - * Then we need to mask-read-clear-unmask the triggered GPIO lines - * in the bank to avoid missing nested interrupts for a GPIO line. - * If we wait to unmask individual GPIO lines in the bank after the - * line's interrupt handler has been run, we may miss some nested - * interrupts. - */ -static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - void __iomem *isr_reg = NULL; - u32 isr; - unsigned int gpio_irq, gpio_index; - struct gpio_bank *bank; - u32 retrigger = 0; - int unmasked = 0; - struct irq_chip *chip = irq_desc_get_chip(desc); - - chained_irq_enter(chip, desc); - - bank = irq_get_handler_data(irq); -#ifdef CONFIG_ARCH_OMAP1 - if (bank->method == METHOD_MPUIO) - isr_reg = bank->base + - OMAP_MPUIO_GPIO_INT / bank->stride; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - if (bank->method == METHOD_GPIO_1510) - isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS; -#endif -#if defined(CONFIG_ARCH_OMAP16XX) - if (bank->method == METHOD_GPIO_1610) - isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - if (bank->method == METHOD_GPIO_7XX) - isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - if (bank->method == METHOD_GPIO_24XX) - isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; -#endif -#if defined(CONFIG_ARCH_OMAP4) - if (bank->method == METHOD_GPIO_44XX) - isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0; -#endif - - if (WARN_ON(!isr_reg)) - goto exit; - - while(1) { - u32 isr_saved, level_mask = 0; - u32 enabled; - - enabled = _get_gpio_irqbank_mask(bank); - isr_saved = isr = __raw_readl(isr_reg) & enabled; - - if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO)) - isr &= 0x0000ffff; - - if (cpu_class_is_omap2()) { - level_mask = bank->level_mask & enabled; - } - - /* clear edge sensitive interrupts before handler(s) are - called so that we don't miss any interrupt occurred while - executing them */ - _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 0); - _clear_gpio_irqbank(bank, isr_saved & ~level_mask); - _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 1); - - /* if there is only edge sensitive GPIO pin interrupts - configured, we could unmask GPIO bank interrupt immediately */ - if (!level_mask && !unmasked) { - unmasked = 1; - chained_irq_exit(chip, desc); - } - - isr |= retrigger; - retrigger = 0; - if (!isr) - break; - - gpio_irq = bank->virtual_irq_start; - for (; isr != 0; isr >>= 1, gpio_irq++) { - gpio_index = get_gpio_index(irq_to_gpio(gpio_irq)); - - if (!(isr & 1)) - continue; - -#ifdef CONFIG_ARCH_OMAP1 - /* - * Some chips can't respond to both rising and falling - * at the same time. If this irq was requested with - * both flags, we need to flip the ICR data for the IRQ - * to respond to the IRQ for the opposite direction. - * This will be indicated in the bank toggle_mask. - */ - if (bank->toggle_mask & (1 << gpio_index)) - _toggle_gpio_edge_triggering(bank, gpio_index); -#endif - - generic_handle_irq(gpio_irq); - } - } - /* if bank has any level sensitive GPIO pin interrupt - configured, we must unmask the bank interrupt only after - handler(s) are executed in order to avoid spurious bank - interrupt */ -exit: - if (!unmasked) - chained_irq_exit(chip, desc); -} - -static void gpio_irq_shutdown(struct irq_data *d) -{ - unsigned int gpio = d->irq - IH_GPIO_BASE; - struct gpio_bank *bank = irq_data_get_irq_chip_data(d); - - _reset_gpio(bank, gpio); -} - -static void gpio_ack_irq(struct irq_data *d) -{ - unsigned int gpio = d->irq - IH_GPIO_BASE; - struct gpio_bank *bank = irq_data_get_irq_chip_data(d); - - _clear_gpio_irqstatus(bank, gpio); -} - -static void gpio_mask_irq(struct irq_data *d) -{ - unsigned int gpio = d->irq - IH_GPIO_BASE; - struct gpio_bank *bank = irq_data_get_irq_chip_data(d); - - _set_gpio_irqenable(bank, gpio, 0); - _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); -} - -static void gpio_unmask_irq(struct irq_data *d) -{ - unsigned int gpio = d->irq - IH_GPIO_BASE; - struct gpio_bank *bank = irq_data_get_irq_chip_data(d); - unsigned int irq_mask = 1 << get_gpio_index(gpio); - u32 trigger = irqd_get_trigger_type(d); - - if (trigger) - _set_gpio_triggering(bank, get_gpio_index(gpio), trigger); - - /* For level-triggered GPIOs, the clearing must be done after - * the HW source is cleared, thus after the handler has run */ - if (bank->level_mask & irq_mask) { - _set_gpio_irqenable(bank, gpio, 0); - _clear_gpio_irqstatus(bank, gpio); - } - - _set_gpio_irqenable(bank, gpio, 1); -} - -static struct irq_chip gpio_irq_chip = { - .name = "GPIO", - .irq_shutdown = gpio_irq_shutdown, - .irq_ack = gpio_ack_irq, - .irq_mask = gpio_mask_irq, - .irq_unmask = gpio_unmask_irq, - .irq_set_type = gpio_irq_type, - .irq_set_wake = gpio_wake_enable, -}; - -/*---------------------------------------------------------------------*/ - -#ifdef CONFIG_ARCH_OMAP1 - -/* MPUIO uses the always-on 32k clock */ - -static void mpuio_ack_irq(struct irq_data *d) -{ - /* The ISR is reset automatically, so do nothing here. */ -} - -static void mpuio_mask_irq(struct irq_data *d) -{ - unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE); - struct gpio_bank *bank = irq_data_get_irq_chip_data(d); - - _set_gpio_irqenable(bank, gpio, 0); -} - -static void mpuio_unmask_irq(struct irq_data *d) -{ - unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE); - struct gpio_bank *bank = irq_data_get_irq_chip_data(d); - - _set_gpio_irqenable(bank, gpio, 1); -} - -static struct irq_chip mpuio_irq_chip = { - .name = "MPUIO", - .irq_ack = mpuio_ack_irq, - .irq_mask = mpuio_mask_irq, - .irq_unmask = mpuio_unmask_irq, - .irq_set_type = gpio_irq_type, -#ifdef CONFIG_ARCH_OMAP16XX - /* REVISIT: assuming only 16xx supports MPUIO wake events */ - .irq_set_wake = gpio_wake_enable, -#endif -}; - - -#define bank_is_mpuio(bank) ((bank)->method == METHOD_MPUIO) - - -#ifdef CONFIG_ARCH_OMAP16XX - -#include <linux/platform_device.h> - -static int omap_mpuio_suspend_noirq(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct gpio_bank *bank = platform_get_drvdata(pdev); - void __iomem *mask_reg = bank->base + - OMAP_MPUIO_GPIO_MASKIT / bank->stride; - unsigned long flags; - - spin_lock_irqsave(&bank->lock, flags); - bank->saved_wakeup = __raw_readl(mask_reg); - __raw_writel(0xffff & ~bank->suspend_wakeup, mask_reg); - spin_unlock_irqrestore(&bank->lock, flags); - - return 0; -} - -static int omap_mpuio_resume_noirq(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct gpio_bank *bank = platform_get_drvdata(pdev); - void __iomem *mask_reg = bank->base + - OMAP_MPUIO_GPIO_MASKIT / bank->stride; - unsigned long flags; - - spin_lock_irqsave(&bank->lock, flags); - __raw_writel(bank->saved_wakeup, mask_reg); - spin_unlock_irqrestore(&bank->lock, flags); - - return 0; -} - -static const struct dev_pm_ops omap_mpuio_dev_pm_ops = { - .suspend_noirq = omap_mpuio_suspend_noirq, - .resume_noirq = omap_mpuio_resume_noirq, -}; - -/* use platform_driver for this. */ -static struct platform_driver omap_mpuio_driver = { - .driver = { - .name = "mpuio", - .pm = &omap_mpuio_dev_pm_ops, - }, -}; - -static struct platform_device omap_mpuio_device = { - .name = "mpuio", - .id = -1, - .dev = { - .driver = &omap_mpuio_driver.driver, - } - /* could list the /proc/iomem resources */ -}; - -static inline void mpuio_init(void) -{ - struct gpio_bank *bank = get_gpio_bank(OMAP_MPUIO(0)); - platform_set_drvdata(&omap_mpuio_device, bank); - - if (platform_driver_register(&omap_mpuio_driver) == 0) - (void) platform_device_register(&omap_mpuio_device); -} - -#else -static inline void mpuio_init(void) {} -#endif /* 16xx */ - -#else - -extern struct irq_chip mpuio_irq_chip; - -#define bank_is_mpuio(bank) 0 -static inline void mpuio_init(void) {} - -#endif - -/*---------------------------------------------------------------------*/ - -/* REVISIT these are stupid implementations! replace by ones that - * don't switch on METHOD_* and which mostly avoid spinlocks - */ - -static int gpio_input(struct gpio_chip *chip, unsigned offset) -{ - struct gpio_bank *bank; - unsigned long flags; - - bank = container_of(chip, struct gpio_bank, chip); - spin_lock_irqsave(&bank->lock, flags); - _set_gpio_direction(bank, offset, 1); - spin_unlock_irqrestore(&bank->lock, flags); - return 0; -} - -static int gpio_is_input(struct gpio_bank *bank, int mask) -{ - void __iomem *reg = bank->base; - - switch (bank->method) { - case METHOD_MPUIO: - reg += OMAP_MPUIO_IO_CNTL / bank->stride; - break; - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DIRECTION; - break; - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_OE; - break; - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_OE; - break; - default: - WARN_ONCE(1, "gpio_is_input: incorrect OMAP GPIO method"); - return -EINVAL; - } - return __raw_readl(reg) & mask; -} - -static int gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct gpio_bank *bank; - void __iomem *reg; - int gpio; - u32 mask; - - gpio = chip->base + offset; - bank = get_gpio_bank(gpio); - reg = bank->base; - mask = 1 << get_gpio_index(gpio); - - if (gpio_is_input(bank, mask)) - return _get_gpio_datain(bank, gpio); - else - return _get_gpio_dataout(bank, gpio); -} - -static int gpio_output(struct gpio_chip *chip, unsigned offset, int value) -{ - struct gpio_bank *bank; - unsigned long flags; - - bank = container_of(chip, struct gpio_bank, chip); - spin_lock_irqsave(&bank->lock, flags); - _set_gpio_dataout(bank, offset, value); - _set_gpio_direction(bank, offset, 0); - spin_unlock_irqrestore(&bank->lock, flags); - return 0; -} - -static int gpio_debounce(struct gpio_chip *chip, unsigned offset, - unsigned debounce) -{ - struct gpio_bank *bank; - unsigned long flags; - - bank = container_of(chip, struct gpio_bank, chip); - - if (!bank->dbck) { - bank->dbck = clk_get(bank->dev, "dbclk"); - if (IS_ERR(bank->dbck)) - dev_err(bank->dev, "Could not get gpio dbck\n"); - } - - spin_lock_irqsave(&bank->lock, flags); - _set_gpio_debounce(bank, offset, debounce); - spin_unlock_irqrestore(&bank->lock, flags); - - return 0; -} - -static void gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct gpio_bank *bank; - unsigned long flags; - - bank = container_of(chip, struct gpio_bank, chip); - spin_lock_irqsave(&bank->lock, flags); - _set_gpio_dataout(bank, offset, value); - spin_unlock_irqrestore(&bank->lock, flags); -} - -static int gpio_2irq(struct gpio_chip *chip, unsigned offset) -{ - struct gpio_bank *bank; - - bank = container_of(chip, struct gpio_bank, chip); - return bank->virtual_irq_start + offset; -} - -/*---------------------------------------------------------------------*/ - -static void __init omap_gpio_show_rev(struct gpio_bank *bank) -{ - u32 rev; - - if (cpu_is_omap16xx() && !(bank->method != METHOD_MPUIO)) - rev = __raw_readw(bank->base + OMAP1610_GPIO_REVISION); - else if (cpu_is_omap24xx() || cpu_is_omap34xx()) - rev = __raw_readl(bank->base + OMAP24XX_GPIO_REVISION); - else if (cpu_is_omap44xx()) - rev = __raw_readl(bank->base + OMAP4_GPIO_REVISION); - else - return; - - printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); -} - -/* This lock class tells lockdep that GPIO irqs are in a different - * category than their parents, so it won't report false recursion. - */ -static struct lock_class_key gpio_lock_class; - -static inline int init_gpio_info(struct platform_device *pdev) -{ - /* TODO: Analyze removing gpio_bank_count usage from driver code */ - gpio_bank = kzalloc(gpio_bank_count * sizeof(struct gpio_bank), - GFP_KERNEL); - if (!gpio_bank) { - dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n"); - return -ENOMEM; - } - return 0; -} - -/* TODO: Cleanup cpu_is_* checks */ -static void omap_gpio_mod_init(struct gpio_bank *bank, int id) -{ - if (cpu_class_is_omap2()) { - if (cpu_is_omap44xx()) { - __raw_writel(0xffffffff, bank->base + - OMAP4_GPIO_IRQSTATUSCLR0); - __raw_writel(0x00000000, bank->base + - OMAP4_GPIO_DEBOUNCENABLE); - /* Initialize interface clk ungated, module enabled */ - __raw_writel(0, bank->base + OMAP4_GPIO_CTRL); - } else if (cpu_is_omap34xx()) { - __raw_writel(0x00000000, bank->base + - OMAP24XX_GPIO_IRQENABLE1); - __raw_writel(0xffffffff, bank->base + - OMAP24XX_GPIO_IRQSTATUS1); - __raw_writel(0x00000000, bank->base + - OMAP24XX_GPIO_DEBOUNCE_EN); - - /* Initialize interface clk ungated, module enabled */ - __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL); - } else if (cpu_is_omap24xx()) { - static const u32 non_wakeup_gpios[] = { - 0xe203ffc0, 0x08700040 - }; - if (id < ARRAY_SIZE(non_wakeup_gpios)) - bank->non_wakeup_gpios = non_wakeup_gpios[id]; - } - } else if (cpu_class_is_omap1()) { - if (bank_is_mpuio(bank)) - __raw_writew(0xffff, bank->base + - OMAP_MPUIO_GPIO_MASKIT / bank->stride); - if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { - __raw_writew(0xffff, bank->base - + OMAP1510_GPIO_INT_MASK); - __raw_writew(0x0000, bank->base - + OMAP1510_GPIO_INT_STATUS); - } - if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) { - __raw_writew(0x0000, bank->base - + OMAP1610_GPIO_IRQENABLE1); - __raw_writew(0xffff, bank->base - + OMAP1610_GPIO_IRQSTATUS1); - __raw_writew(0x0014, bank->base - + OMAP1610_GPIO_SYSCONFIG); - - /* - * Enable system clock for GPIO module. - * The CAM_CLK_CTRL *is* really the right place. - */ - omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, - ULPD_CAM_CLK_CTRL); - } - if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) { - __raw_writel(0xffffffff, bank->base - + OMAP7XX_GPIO_INT_MASK); - __raw_writel(0x00000000, bank->base - + OMAP7XX_GPIO_INT_STATUS); - } - } -} - -static void __init omap_gpio_chip_init(struct gpio_bank *bank) -{ - int j; - static int gpio; - - bank->mod_usage = 0; - /* - * REVISIT eventually switch from OMAP-specific gpio structs - * over to the generic ones - */ - bank->chip.request = omap_gpio_request; - bank->chip.free = omap_gpio_free; - bank->chip.direction_input = gpio_input; - bank->chip.get = gpio_get; - bank->chip.direction_output = gpio_output; - bank->chip.set_debounce = gpio_debounce; - bank->chip.set = gpio_set; - bank->chip.to_irq = gpio_2irq; - if (bank_is_mpuio(bank)) { - bank->chip.label = "mpuio"; -#ifdef CONFIG_ARCH_OMAP16XX - bank->chip.dev = &omap_mpuio_device.dev; -#endif - bank->chip.base = OMAP_MPUIO(0); - } else { - bank->chip.label = "gpio"; - bank->chip.base = gpio; - gpio += bank_width; - } - bank->chip.ngpio = bank_width; - - gpiochip_add(&bank->chip); - - for (j = bank->virtual_irq_start; - j < bank->virtual_irq_start + bank_width; j++) { - irq_set_lockdep_class(j, &gpio_lock_class); - irq_set_chip_data(j, bank); - if (bank_is_mpuio(bank)) - irq_set_chip(j, &mpuio_irq_chip); - else - irq_set_chip(j, &gpio_irq_chip); - irq_set_handler(j, handle_simple_irq); - set_irq_flags(j, IRQF_VALID); - } - irq_set_chained_handler(bank->irq, gpio_irq_handler); - irq_set_handler_data(bank->irq, bank); -} - -static int __devinit omap_gpio_probe(struct platform_device *pdev) -{ - static int gpio_init_done; - struct omap_gpio_platform_data *pdata; - struct resource *res; - int id; - struct gpio_bank *bank; - - if (!pdev->dev.platform_data) - return -EINVAL; - - pdata = pdev->dev.platform_data; - - if (!gpio_init_done) { - int ret; - - ret = init_gpio_info(pdev); - if (ret) - return ret; - } - - id = pdev->id; - bank = &gpio_bank[id]; - - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (unlikely(!res)) { - dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n", id); - return -ENODEV; - } - - bank->irq = res->start; - bank->virtual_irq_start = pdata->virtual_irq_start; - bank->method = pdata->bank_type; - bank->dev = &pdev->dev; - bank->dbck_flag = pdata->dbck_flag; - bank->stride = pdata->bank_stride; - bank_width = pdata->bank_width; - - spin_lock_init(&bank->lock); - - /* Static mapping, never released */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (unlikely(!res)) { - dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n", id); - return -ENODEV; - } - - bank->base = ioremap(res->start, resource_size(res)); - if (!bank->base) { - dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n", id); - return -ENOMEM; - } - - pm_runtime_enable(bank->dev); - pm_runtime_get_sync(bank->dev); - - omap_gpio_mod_init(bank, id); - omap_gpio_chip_init(bank); - omap_gpio_show_rev(bank); - - if (!gpio_init_done) - gpio_init_done = 1; - - return 0; -} - -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) -static int omap_gpio_suspend(void) -{ - int i; - - if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) - return 0; - - for (i = 0; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - void __iomem *wake_status; - void __iomem *wake_clear; - void __iomem *wake_set; - unsigned long flags; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE; - wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; - wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN; - wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; - wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0; - wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0; - wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0; - break; -#endif - default: - continue; - } - - spin_lock_irqsave(&bank->lock, flags); - bank->saved_wakeup = __raw_readl(wake_status); - __raw_writel(0xffffffff, wake_clear); - __raw_writel(bank->suspend_wakeup, wake_set); - spin_unlock_irqrestore(&bank->lock, flags); - } - - return 0; -} - -static void omap_gpio_resume(void) -{ - int i; - - if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) - return; - - for (i = 0; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - void __iomem *wake_clear; - void __iomem *wake_set; - unsigned long flags; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; - wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; - wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0; - wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0; - break; -#endif - default: - continue; - } - - spin_lock_irqsave(&bank->lock, flags); - __raw_writel(0xffffffff, wake_clear); - __raw_writel(bank->saved_wakeup, wake_set); - spin_unlock_irqrestore(&bank->lock, flags); - } -} - -static struct syscore_ops omap_gpio_syscore_ops = { - .suspend = omap_gpio_suspend, - .resume = omap_gpio_resume, -}; - -#endif - -#ifdef CONFIG_ARCH_OMAP2PLUS - -static int workaround_enabled; - -void omap2_gpio_prepare_for_idle(int off_mode) -{ - int i, c = 0; - int min = 0; - - if (cpu_is_omap34xx()) - min = 1; - - for (i = min; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - u32 l1 = 0, l2 = 0; - int j; - - for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) - clk_disable(bank->dbck); - - if (!off_mode) - continue; - - /* If going to OFF, remove triggering for all - * non-wakeup GPIOs. Otherwise spurious IRQs will be - * generated. See OMAP2420 Errata item 1.101. */ - if (!(bank->enabled_non_wakeup_gpios)) - continue; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - bank->saved_datain = __raw_readl(bank->base + - OMAP24XX_GPIO_DATAIN); - l1 = __raw_readl(bank->base + - OMAP24XX_GPIO_FALLINGDETECT); - l2 = __raw_readl(bank->base + - OMAP24XX_GPIO_RISINGDETECT); - } - - if (cpu_is_omap44xx()) { - bank->saved_datain = __raw_readl(bank->base + - OMAP4_GPIO_DATAIN); - l1 = __raw_readl(bank->base + - OMAP4_GPIO_FALLINGDETECT); - l2 = __raw_readl(bank->base + - OMAP4_GPIO_RISINGDETECT); - } - - bank->saved_fallingdetect = l1; - bank->saved_risingdetect = l2; - l1 &= ~bank->enabled_non_wakeup_gpios; - l2 &= ~bank->enabled_non_wakeup_gpios; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - __raw_writel(l1, bank->base + - OMAP24XX_GPIO_FALLINGDETECT); - __raw_writel(l2, bank->base + - OMAP24XX_GPIO_RISINGDETECT); - } - - if (cpu_is_omap44xx()) { - __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT); - __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT); - } - - c++; - } - if (!c) { - workaround_enabled = 0; - return; - } - workaround_enabled = 1; -} - -void omap2_gpio_resume_after_idle(void) -{ - int i; - int min = 0; - - if (cpu_is_omap34xx()) - min = 1; - for (i = min; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - u32 l = 0, gen, gen0, gen1; - int j; - - for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) - clk_enable(bank->dbck); - - if (!workaround_enabled) - continue; - - if (!(bank->enabled_non_wakeup_gpios)) - continue; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - __raw_writel(bank->saved_fallingdetect, - bank->base + OMAP24XX_GPIO_FALLINGDETECT); - __raw_writel(bank->saved_risingdetect, - bank->base + OMAP24XX_GPIO_RISINGDETECT); - l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); - } - - if (cpu_is_omap44xx()) { - __raw_writel(bank->saved_fallingdetect, - bank->base + OMAP4_GPIO_FALLINGDETECT); - __raw_writel(bank->saved_risingdetect, - bank->base + OMAP4_GPIO_RISINGDETECT); - l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN); - } - - /* Check if any of the non-wakeup interrupt GPIOs have changed - * state. If so, generate an IRQ by software. This is - * horribly racy, but it's the best we can do to work around - * this silicon bug. */ - l ^= bank->saved_datain; - l &= bank->enabled_non_wakeup_gpios; - - /* - * No need to generate IRQs for the rising edge for gpio IRQs - * configured with falling edge only; and vice versa. - */ - gen0 = l & bank->saved_fallingdetect; - gen0 &= bank->saved_datain; - - gen1 = l & bank->saved_risingdetect; - gen1 &= ~(bank->saved_datain); - - /* FIXME: Consider GPIO IRQs with level detections properly! */ - gen = l & (~(bank->saved_fallingdetect) & - ~(bank->saved_risingdetect)); - /* Consider all GPIO IRQs needed to be updated */ - gen |= gen0 | gen1; - - if (gen) { - u32 old0, old1; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - old0 = __raw_readl(bank->base + - OMAP24XX_GPIO_LEVELDETECT0); - old1 = __raw_readl(bank->base + - OMAP24XX_GPIO_LEVELDETECT1); - __raw_writel(old0 | gen, bank->base + - OMAP24XX_GPIO_LEVELDETECT0); - __raw_writel(old1 | gen, bank->base + - OMAP24XX_GPIO_LEVELDETECT1); - __raw_writel(old0, bank->base + - OMAP24XX_GPIO_LEVELDETECT0); - __raw_writel(old1, bank->base + - OMAP24XX_GPIO_LEVELDETECT1); - } - - if (cpu_is_omap44xx()) { - old0 = __raw_readl(bank->base + - OMAP4_GPIO_LEVELDETECT0); - old1 = __raw_readl(bank->base + - OMAP4_GPIO_LEVELDETECT1); - __raw_writel(old0 | l, bank->base + - OMAP4_GPIO_LEVELDETECT0); - __raw_writel(old1 | l, bank->base + - OMAP4_GPIO_LEVELDETECT1); - __raw_writel(old0, bank->base + - OMAP4_GPIO_LEVELDETECT0); - __raw_writel(old1, bank->base + - OMAP4_GPIO_LEVELDETECT1); - } - } - } - -} - -#endif - -#ifdef CONFIG_ARCH_OMAP3 -/* save the registers of bank 2-6 */ -void omap_gpio_save_context(void) -{ - int i; - - /* saving banks from 2-6 only since GPIO1 is in WKUP */ - for (i = 1; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - gpio_context[i].irqenable1 = - __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1); - gpio_context[i].irqenable2 = - __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2); - gpio_context[i].wake_en = - __raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN); - gpio_context[i].ctrl = - __raw_readl(bank->base + OMAP24XX_GPIO_CTRL); - gpio_context[i].oe = - __raw_readl(bank->base + OMAP24XX_GPIO_OE); - gpio_context[i].leveldetect0 = - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0); - gpio_context[i].leveldetect1 = - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); - gpio_context[i].risingdetect = - __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT); - gpio_context[i].fallingdetect = - __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT); - gpio_context[i].dataout = - __raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT); - } -} - -/* restore the required registers of bank 2-6 */ -void omap_gpio_restore_context(void) -{ - int i; - - for (i = 1; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - __raw_writel(gpio_context[i].irqenable1, - bank->base + OMAP24XX_GPIO_IRQENABLE1); - __raw_writel(gpio_context[i].irqenable2, - bank->base + OMAP24XX_GPIO_IRQENABLE2); - __raw_writel(gpio_context[i].wake_en, - bank->base + OMAP24XX_GPIO_WAKE_EN); - __raw_writel(gpio_context[i].ctrl, - bank->base + OMAP24XX_GPIO_CTRL); - __raw_writel(gpio_context[i].oe, - bank->base + OMAP24XX_GPIO_OE); - __raw_writel(gpio_context[i].leveldetect0, - bank->base + OMAP24XX_GPIO_LEVELDETECT0); - __raw_writel(gpio_context[i].leveldetect1, - bank->base + OMAP24XX_GPIO_LEVELDETECT1); - __raw_writel(gpio_context[i].risingdetect, - bank->base + OMAP24XX_GPIO_RISINGDETECT); - __raw_writel(gpio_context[i].fallingdetect, - bank->base + OMAP24XX_GPIO_FALLINGDETECT); - __raw_writel(gpio_context[i].dataout, - bank->base + OMAP24XX_GPIO_DATAOUT); - } -} -#endif - -static struct platform_driver omap_gpio_driver = { - .probe = omap_gpio_probe, - .driver = { - .name = "omap_gpio", - }, -}; - -/* - * gpio driver register needs to be done before - * machine_init functions access gpio APIs. - * Hence omap_gpio_drv_reg() is a postcore_initcall. - */ -static int __init omap_gpio_drv_reg(void) -{ - return platform_driver_register(&omap_gpio_driver); -} -postcore_initcall(omap_gpio_drv_reg); - -static int __init omap_gpio_sysinit(void) -{ - mpuio_init(); - -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) - if (cpu_is_omap16xx() || cpu_class_is_omap2()) - register_syscore_ops(&omap_gpio_syscore_ops); -#endif - - return 0; -} - -arch_initcall(omap_gpio_sysinit); diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index cac2e8ac696..ec97e00cb58 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -52,6 +52,109 @@ #define OMAP34XX_NR_GPIOS 6 +/* + * OMAP1510 GPIO registers + */ +#define OMAP1510_GPIO_DATA_INPUT 0x00 +#define OMAP1510_GPIO_DATA_OUTPUT 0x04 +#define OMAP1510_GPIO_DIR_CONTROL 0x08 +#define OMAP1510_GPIO_INT_CONTROL 0x0c +#define OMAP1510_GPIO_INT_MASK 0x10 +#define OMAP1510_GPIO_INT_STATUS 0x14 +#define OMAP1510_GPIO_PIN_CONTROL 0x18 + +#define OMAP1510_IH_GPIO_BASE 64 + +/* + * OMAP1610 specific GPIO registers + */ +#define OMAP1610_GPIO_REVISION 0x0000 +#define OMAP1610_GPIO_SYSCONFIG 0x0010 +#define OMAP1610_GPIO_SYSSTATUS 0x0014 +#define OMAP1610_GPIO_IRQSTATUS1 0x0018 +#define OMAP1610_GPIO_IRQENABLE1 0x001c +#define OMAP1610_GPIO_WAKEUPENABLE 0x0028 +#define OMAP1610_GPIO_DATAIN 0x002c +#define OMAP1610_GPIO_DATAOUT 0x0030 +#define OMAP1610_GPIO_DIRECTION 0x0034 +#define OMAP1610_GPIO_EDGE_CTRL1 0x0038 +#define OMAP1610_GPIO_EDGE_CTRL2 0x003c +#define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c +#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8 +#define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0 +#define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc +#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8 +#define OMAP1610_GPIO_SET_DATAOUT 0x00f0 + +/* + * OMAP7XX specific GPIO registers + */ +#define OMAP7XX_GPIO_DATA_INPUT 0x00 +#define OMAP7XX_GPIO_DATA_OUTPUT 0x04 +#define OMAP7XX_GPIO_DIR_CONTROL 0x08 +#define OMAP7XX_GPIO_INT_CONTROL 0x0c +#define OMAP7XX_GPIO_INT_MASK 0x10 +#define OMAP7XX_GPIO_INT_STATUS 0x14 + +/* + * omap2+ specific GPIO registers + */ +#define OMAP24XX_GPIO_REVISION 0x0000 +#define OMAP24XX_GPIO_IRQSTATUS1 0x0018 +#define OMAP24XX_GPIO_IRQSTATUS2 0x0028 +#define OMAP24XX_GPIO_IRQENABLE2 0x002c +#define OMAP24XX_GPIO_IRQENABLE1 0x001c +#define OMAP24XX_GPIO_WAKE_EN 0x0020 +#define OMAP24XX_GPIO_CTRL 0x0030 +#define OMAP24XX_GPIO_OE 0x0034 +#define OMAP24XX_GPIO_DATAIN 0x0038 +#define OMAP24XX_GPIO_DATAOUT 0x003c +#define OMAP24XX_GPIO_LEVELDETECT0 0x0040 +#define OMAP24XX_GPIO_LEVELDETECT1 0x0044 +#define OMAP24XX_GPIO_RISINGDETECT 0x0048 +#define OMAP24XX_GPIO_FALLINGDETECT 0x004c +#define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050 +#define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054 +#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060 +#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064 +#define OMAP24XX_GPIO_CLEARWKUENA 0x0080 +#define OMAP24XX_GPIO_SETWKUENA 0x0084 +#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090 +#define OMAP24XX_GPIO_SETDATAOUT 0x0094 + +#define OMAP4_GPIO_REVISION 0x0000 +#define OMAP4_GPIO_EOI 0x0020 +#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024 +#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028 +#define OMAP4_GPIO_IRQSTATUS0 0x002c +#define OMAP4_GPIO_IRQSTATUS1 0x0030 +#define OMAP4_GPIO_IRQSTATUSSET0 0x0034 +#define OMAP4_GPIO_IRQSTATUSSET1 0x0038 +#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c +#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040 +#define OMAP4_GPIO_IRQWAKEN0 0x0044 +#define OMAP4_GPIO_IRQWAKEN1 0x0048 +#define OMAP4_GPIO_IRQENABLE1 0x011c +#define OMAP4_GPIO_WAKE_EN 0x0120 +#define OMAP4_GPIO_IRQSTATUS2 0x0128 +#define OMAP4_GPIO_IRQENABLE2 0x012c +#define OMAP4_GPIO_CTRL 0x0130 +#define OMAP4_GPIO_OE 0x0134 +#define OMAP4_GPIO_DATAIN 0x0138 +#define OMAP4_GPIO_DATAOUT 0x013c +#define OMAP4_GPIO_LEVELDETECT0 0x0140 +#define OMAP4_GPIO_LEVELDETECT1 0x0144 +#define OMAP4_GPIO_RISINGDETECT 0x0148 +#define OMAP4_GPIO_FALLINGDETECT 0x014c +#define OMAP4_GPIO_DEBOUNCENABLE 0x0150 +#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154 +#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160 +#define OMAP4_GPIO_SETIRQENABLE1 0x0164 +#define OMAP4_GPIO_CLEARWKUENA 0x0180 +#define OMAP4_GPIO_SETWKUENA 0x0184 +#define OMAP4_GPIO_CLEARDATAOUT 0x0190 +#define OMAP4_GPIO_SETDATAOUT 0x0194 + #define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) #define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 6751bcf7b88..e98f5c5c787 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -7,7 +7,7 @@ config PLAT_S5P bool - depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4) + depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4) default y select ARM_VIC if !ARCH_EXYNOS4 select ARM_GIC if ARCH_EXYNOS4 diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index 5cf5e721e6c..bbc2aa7449c 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -21,7 +21,6 @@ #include <plat/cpu.h> #include <plat/s5p6440.h> -#include <plat/s5p6442.h> #include <plat/s5p6450.h> #include <plat/s5pc100.h> #include <plat/s5pv210.h> @@ -30,7 +29,6 @@ /* table of supported CPUs */ static const char name_s5p6440[] = "S5P6440"; -static const char name_s5p6442[] = "S5P6442"; static const char name_s5p6450[] = "S5P6450"; static const char name_s5pc100[] = "S5PC100"; static const char name_s5pv210[] = "S5PV210/S5PC110"; @@ -46,14 +44,6 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s5p64x0_init, .name = name_s5p6440, }, { - .idcode = 0x36442000, - .idmask = 0xfffff000, - .map_io = s5p6442_map_io, - .init_clocks = s5p6442_init_clocks, - .init_uarts = s5p6442_init_uarts, - .init = s5p6442_init, - .name = name_s5p6442, - }, { .idcode = 0x36450000, .idmask = 0xfffff000, .map_io = s5p6450_map_io, diff --git a/arch/arm/plat-s5p/include/plat/s5p6442.h b/arch/arm/plat-s5p/include/plat/s5p6442.h deleted file mode 100644 index 7b8801349c9..00000000000 --- a/arch/arm/plat-s5p/include/plat/s5p6442.h +++ /dev/null @@ -1,33 +0,0 @@ -/* arch/arm/plat-s5p/include/plat/s5p6442.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5p6442 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S5P6442 related SoCs */ - -extern void s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s5p6442_register_clocks(void); -extern void s5p6442_setup_clocks(void); - -#ifdef CONFIG_CPU_S5P6442 - -extern int s5p6442_init(void); -extern void s5p6442_init_irq(void); -extern void s5p6442_map_io(void); -extern void s5p6442_init_clocks(int xtal); - -#define s5p6442_init_uarts s5p6442_common_init_uarts - -#else -#define s5p6442_init_clocks NULL -#define s5p6442_init_uarts NULL -#define s5p6442_map_io NULL -#define s5p6442_init NULL -#endif diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index e9de58a2e29..53eb15b0a07 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -19,7 +19,6 @@ obj-y += gpio.o obj-y += gpio-config.o obj-y += dev-asocdma.o -obj-$(CONFIG_SAMSUNG_GPIOLIB_4BIT) += gpiolib.o obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o obj-$(CONFIG_SAMSUNG_IRQ_UART) += irq-uart.o diff --git a/arch/arm/plat-samsung/gpiolib.c b/arch/arm/plat-samsung/gpiolib.c deleted file mode 100644 index ea37c046178..00000000000 --- a/arch/arm/plat-samsung/gpiolib.c +++ /dev/null @@ -1,206 +0,0 @@ -/* arch/arm/plat-samsung/gpiolib.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * SAMSUNG - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> - -#ifndef DEBUG_GPIO -#define gpio_dbg(x...) do { } while (0) -#else -#define gpio_dbg(x...) printk(KERN_DEBUG x) -#endif - -/* The samsung_gpiolib_4bit routines are to control the gpio banks where - * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the - * following example: - * - * base + 0x00: Control register, 4 bits per gpio - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x04: Data register, 1 bit per gpio - * bit n: data bit n - * - * Note, since the data register is one bit per gpio and is at base + 0x4 - * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of - * the output. -*/ - -static int samsung_gpiolib_4bit_input(struct gpio_chip *chip, - unsigned int offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long con; - - con = __raw_readl(base + GPIOCON_OFF); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, base + GPIOCON_OFF); - - gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); - - return 0; -} - -static int samsung_gpiolib_4bit_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long con; - unsigned long dat; - - con = __raw_readl(base + GPIOCON_OFF); - con &= ~(0xf << con_4bit_shift(offset)); - con |= 0x1 << con_4bit_shift(offset); - - dat = __raw_readl(base + GPIODAT_OFF); - - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(dat, base + GPIODAT_OFF); - __raw_writel(con, base + GPIOCON_OFF); - __raw_writel(dat, base + GPIODAT_OFF); - - gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); - - return 0; -} - -/* The next set of routines are for the case where the GPIO configuration - * registers are 4 bits per GPIO but there is more than one register (the - * bank has more than 8 GPIOs. - * - * This case is the similar to the 4 bit case, but the registers are as - * follows: - * - * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs) - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs) - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x08: Data register, 1 bit per gpio - * bit n: data bit n - * - * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we - * store the 'base + 0x4' address so that these routines see the data - * register at ourchip->base + 0x04. - */ - -static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip, - unsigned int offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - - if (offset > 7) - offset -= 8; - else - regcon -= 4; - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, regcon); - - gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con); - - return 0; -} - -static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - unsigned long dat; - unsigned con_offset = offset; - - if (con_offset > 7) - con_offset -= 8; - else - regcon -= 4; - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(con_offset)); - con |= 0x1 << con_4bit_shift(con_offset); - - dat = __raw_readl(base + GPIODAT_OFF); - - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(dat, base + GPIODAT_OFF); - __raw_writel(con, regcon); - __raw_writel(dat, base + GPIODAT_OFF); - - gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); - - return 0; -} - -void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip) -{ - chip->chip.direction_input = samsung_gpiolib_4bit_input; - chip->chip.direction_output = samsung_gpiolib_4bit_output; - chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); -} - -void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip) -{ - chip->chip.direction_input = samsung_gpiolib_4bit2_input; - chip->chip.direction_output = samsung_gpiolib_4bit2_output; - chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); -} - -void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip, - int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chip++) { - samsung_gpiolib_add_4bit(chip); - s3c_gpiolib_add(chip); - } -} - -void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, - int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chip++) { - samsung_gpiolib_add_4bit2(chip); - s3c_gpiolib_add(chip); - } -} - -void __init samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip, - int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chip++) - s3c_gpiolib_add(chip); -} diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 3aedac0034b..c0a5741b23e 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -86,7 +86,6 @@ extern struct sysdev_class s3c2443_sysclass; extern struct sysdev_class s3c6410_sysclass; extern struct sysdev_class s3c64xx_sysclass; extern struct sysdev_class s5p64x0_sysclass; -extern struct sysdev_class s5p6442_sysclass; extern struct sysdev_class s5pv210_sysclass; extern struct sysdev_class exynos4_sysclass; diff --git a/arch/arm/plat-samsung/include/plat/debug-macro.S b/arch/arm/plat-samsung/include/plat/debug-macro.S index dc6efd90e8f..207e275362a 100644 --- a/arch/arm/plat-samsung/include/plat/debug-macro.S +++ b/arch/arm/plat-samsung/include/plat/debug-macro.S @@ -11,7 +11,7 @@ #include <plat/regs-serial.h> -/* The S5PV210/S5PC110 and S5P6442 implementations are as belows. */ +/* The S5PV210/S5PC110 implementations are as belows. */ .macro fifo_level_s5pv210 rd, rx ldr \rd, [ \rx, # S3C2410_UFSTAT ] diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 39818d8da42..b61b8ee7cc5 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -111,12 +111,6 @@ extern struct platform_device exynos4_device_spdif; extern struct platform_device exynos4_device_pd[]; extern struct platform_device exynos4_device_ahci; -extern struct platform_device s5p6442_device_pcm0; -extern struct platform_device s5p6442_device_pcm1; -extern struct platform_device s5p6442_device_iis0; -extern struct platform_device s5p6442_device_iis1; -extern struct platform_device s5p6442_device_spi; - extern struct platform_device s5p6440_device_pcm; extern struct platform_device s5p6440_device_iis; diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index 788837e99cb..c151c5f94a8 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -194,7 +194,7 @@ #define S3C64XX_UINTSP 0x34 #define S3C64XX_UINTM 0x38 -/* Following are specific to S5PV210 and S5P6442 */ +/* Following are specific to S5PV210 */ #define S5PV210_UCON_CLKMASK (1<<10) #define S5PV210_UCON_PCLK (0<<10) #define S5PV210_UCON_UCLK (1<<10) diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h index ff1a561b326..0ffe34a2155 100644 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -69,6 +69,5 @@ extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); -extern void s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); #endif /* __S3C64XX_PLAT_SPI_H */ diff --git a/arch/avr32/include/asm/unistd.h b/arch/avr32/include/asm/unistd.h index 89861a27543..f714544e556 100644 --- a/arch/avr32/include/asm/unistd.h +++ b/arch/avr32/include/asm/unistd.h @@ -299,9 +299,10 @@ #define __NR_signalfd 279 /* 280 was __NR_timerfd */ #define __NR_eventfd 281 +#define __NR_setns 283 #ifdef __KERNEL__ -#define NR_syscalls 282 +#define NR_syscalls 284 /* Old stuff */ #define __IGNORE_uselib diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S index e76bad16b0f..c7fd394d28a 100644 --- a/arch/avr32/kernel/syscall_table.S +++ b/arch/avr32/kernel/syscall_table.S @@ -296,4 +296,5 @@ sys_call_table: .long sys_ni_syscall /* 280, was sys_timerfd */ .long sys_eventfd .long sys_recvmmsg + .long sys_setns .long sys_ni_syscall /* r8 is saturated at nr_syscalls */ diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index bfc9d071db9..aa677e2a382 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1014,6 +1014,7 @@ static struct platform_device *__initdata at32_usarts[4]; void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (hw_id) { case 0: @@ -1042,7 +1043,8 @@ void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags) data->regs = (void __iomem *)pdev->resource[0].start; } - pdev->id = line; + pdata = pdev->dev.platform_data; + pdata->num = portnr; at32_usarts[line] = pdev; } diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h index 61740201b31..679458d9a62 100644 --- a/arch/avr32/mach-at32ap/include/mach/board.h +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -33,6 +33,7 @@ extern struct platform_device *atmel_default_console_device; #define ATMEL_USART_CLK 0x04 struct atmel_uart_data { + int num; /* port num */ short use_dma_tx; /* use transmit DMA? */ short use_dma_rx; /* use receive DMA? */ void __iomem *regs; /* virtual base address, if any */ diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h index ff9a9f35d50..6ff9c411b14 100644 --- a/arch/blackfin/include/asm/unistd.h +++ b/arch/blackfin/include/asm/unistd.h @@ -397,8 +397,9 @@ #define __NR_open_by_handle_at 376 #define __NR_clock_adjtime 377 #define __NR_syncfs 378 +#define __NR_setns 379 -#define __NR_syscall 379 +#define __NR_syscall 380 #define NR_syscalls __NR_syscall /* Old optional stuff no one actually uses */ diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index e16dc456004..76db1d48317 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -382,7 +382,6 @@ static struct platform_device net2272_bfin_device = { #endif #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) -#ifdef CONFIG_MTD_PARTITIONS const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL }; static struct mtd_partition bfin_plat_nand_partitions[] = { @@ -396,7 +395,6 @@ static struct mtd_partition bfin_plat_nand_partitions[] = { .offset = MTDPART_OFS_APPEND, }, }; -#endif #define BFIN_NAND_PLAT_CLE 2 #define BFIN_NAND_PLAT_ALE 1 @@ -423,11 +421,9 @@ static struct platform_nand_data bfin_plat_nand_data = { .chip = { .nr_chips = 1, .chip_delay = 30, -#ifdef CONFIG_MTD_PARTITIONS .part_probe_types = part_probes, .partitions = bfin_plat_nand_partitions, .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions), -#endif }, .ctrl = { .cmd_ctrl = bfin_plat_nand_cmd_ctrl, diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c index 3926cd909b6..9231a942892 100644 --- a/arch/blackfin/mach-bf561/boards/acvilon.c +++ b/arch/blackfin/mach-bf561/boards/acvilon.c @@ -243,7 +243,6 @@ static struct platform_device bfin_uart0_device = { #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) -#ifdef CONFIG_MTD_PARTITIONS const char *part_probes[] = { "cmdlinepart", NULL }; static struct mtd_partition bfin_plat_nand_partitions[] = { @@ -257,7 +256,6 @@ static struct mtd_partition bfin_plat_nand_partitions[] = { .offset = MTDPART_OFS_APPEND, }, }; -#endif #define BFIN_NAND_PLAT_CLE 2 #define BFIN_NAND_PLAT_ALE 3 @@ -286,11 +284,9 @@ static struct platform_nand_data bfin_plat_nand_data = { .chip = { .nr_chips = 1, .chip_delay = 30, -#ifdef CONFIG_MTD_PARTITIONS .part_probe_types = part_probes, .partitions = bfin_plat_nand_partitions, .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions), -#endif }, .ctrl = { .cmd_ctrl = bfin_plat_nand_cmd_ctrl, diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index f96933f48a7..dda11ef06be 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -1753,6 +1753,7 @@ ENTRY(_sys_call_table) .long _sys_open_by_handle_at .long _sys_clock_adjtime .long _sys_syncfs + .long _sys_setns .rept NR_syscalls-(.-_sys_call_table)/4 .long _sys_ni_syscall diff --git a/arch/blackfin/mm/maccess.c b/arch/blackfin/mm/maccess.c index b71cebc1f8a..e2532114c5f 100644 --- a/arch/blackfin/mm/maccess.c +++ b/arch/blackfin/mm/maccess.c @@ -16,7 +16,7 @@ static int validate_memory_access_address(unsigned long addr, int size) return bfin_mem_access_type(addr, size); } -long probe_kernel_read(void *dst, void *src, size_t size) +long probe_kernel_read(void *dst, const void *src, size_t size) { unsigned long lsrc = (unsigned long)src; int mem_type; @@ -55,7 +55,7 @@ long probe_kernel_read(void *dst, void *src, size_t size) return -EFAULT; } -long probe_kernel_write(void *dst, void *src, size_t size) +long probe_kernel_write(void *dst, const void *src, size_t size) { unsigned long ldst = (unsigned long)dst; int mem_type; diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index b6b94a27d27..17addacb169 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -270,7 +270,6 @@ config ETRAX_AXISFLASHMAP select MTD_JEDECPROBE if ETRAX_ARCH_V32 select MTD_CHAR select MTD_BLOCK - select MTD_PARTITIONS select MTD_COMPLEX_MAPPINGS help This option enables MTD mapping of flash devices. Needed to use diff --git a/arch/cris/arch-v10/drivers/axisflashmap.c b/arch/cris/arch-v10/drivers/axisflashmap.c index ed708e19d09..a4bbdfd37bd 100644 --- a/arch/cris/arch-v10/drivers/axisflashmap.c +++ b/arch/cris/arch-v10/drivers/axisflashmap.c @@ -372,7 +372,7 @@ static int __init init_axis_flash(void) #ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE if (mymtd) { main_partition.size = mymtd->size; - err = add_mtd_partitions(mymtd, &main_partition, 1); + err = mtd_device_register(mymtd, &main_partition, 1); if (err) panic("axisflashmap: Could not initialize " "partition for whole main mtd device!\n"); @@ -382,10 +382,12 @@ static int __init init_axis_flash(void) if (mymtd) { if (use_default_ptable) { printk(KERN_INFO " Using default partition table.\n"); - err = add_mtd_partitions(mymtd, axis_default_partitions, - NUM_DEFAULT_PARTITIONS); + err = mtd_device_register(mymtd, + axis_default_partitions, + NUM_DEFAULT_PARTITIONS); } else { - err = add_mtd_partitions(mymtd, axis_partitions, pidx); + err = mtd_device_register(mymtd, axis_partitions, + pidx); } if (err) diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S index 0d6420d087f..1161883eb58 100644 --- a/arch/cris/arch-v10/kernel/entry.S +++ b/arch/cris/arch-v10/kernel/entry.S @@ -937,6 +937,7 @@ sys_call_table: .long sys_inotify_init1 .long sys_preadv .long sys_pwritev + .long sys_setns /* 335 */ /* * NOTE!! This doesn't have to be exact - we just have diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index 1633b120aa8..41a2732e8b9 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -405,7 +405,6 @@ config ETRAX_AXISFLASHMAP select MTD_JEDECPROBE select MTD_CHAR select MTD_BLOCK - select MTD_PARTITIONS select MTD_COMPLEX_MAPPINGS help This option enables MTD mapping of flash devices. Needed to use diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c index 7b155f8203b..a2bde374462 100644 --- a/arch/cris/arch-v32/drivers/axisflashmap.c +++ b/arch/cris/arch-v32/drivers/axisflashmap.c @@ -561,7 +561,7 @@ static int __init init_axis_flash(void) #ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE if (main_mtd) { main_partition.size = main_mtd->size; - err = add_mtd_partitions(main_mtd, &main_partition, 1); + err = mtd_device_register(main_mtd, &main_partition, 1); if (err) panic("axisflashmap: Could not initialize " "partition for whole main mtd device!\n"); @@ -597,7 +597,8 @@ static int __init init_axis_flash(void) mtd_ram->erasesize = (main_mtd ? main_mtd->erasesize : CONFIG_ETRAX_PTABLE_SECTOR); } else { - err = add_mtd_partitions(main_mtd, &partition[part], 1); + err = mtd_device_register(main_mtd, &partition[part], + 1); if (err) panic("axisflashmap: Could not add mtd " "partition %d\n", part); @@ -633,7 +634,7 @@ static int __init init_axis_flash(void) #ifndef CONFIG_ETRAX_VCS_SIM if (aux_mtd) { aux_partition.size = aux_mtd->size; - err = add_mtd_partitions(aux_mtd, &aux_partition, 1); + err = mtd_device_register(aux_mtd, &aux_partition, 1); if (err) panic("axisflashmap: Could not initialize " "aux mtd device!\n"); diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S index 3abf12c23e5..84fed7e91ad 100644 --- a/arch/cris/arch-v32/kernel/entry.S +++ b/arch/cris/arch-v32/kernel/entry.S @@ -880,6 +880,7 @@ sys_call_table: .long sys_inotify_init1 .long sys_preadv .long sys_pwritev + .long sys_setns /* 335 */ /* * NOTE!! This doesn't have to be exact - we just have diff --git a/arch/cris/include/asm/unistd.h b/arch/cris/include/asm/unistd.h index f6fad83b3a8..f921b8b0f97 100644 --- a/arch/cris/include/asm/unistd.h +++ b/arch/cris/include/asm/unistd.h @@ -339,10 +339,11 @@ #define __NR_inotify_init1 332 #define __NR_preadv 333 #define __NR_pwritev 334 +#define __NR_setns 335 #ifdef __KERNEL__ -#define NR_syscalls 335 +#define NR_syscalls 336 #include <arch/unistd.h> diff --git a/arch/frv/include/asm/suspend.h b/arch/frv/include/asm/suspend.h deleted file mode 100644 index 5fa7b5a6ee4..00000000000 --- a/arch/frv/include/asm/suspend.h +++ /dev/null @@ -1,20 +0,0 @@ -/* suspend.h: suspension stuff - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_SUSPEND_H -#define _ASM_SUSPEND_H - -static inline int arch_prepare_suspend(void) -{ - return 0; -} - -#endif /* _ASM_SUSPEND_H */ diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h index b28da499e22..a569dff7cd5 100644 --- a/arch/frv/include/asm/unistd.h +++ b/arch/frv/include/asm/unistd.h @@ -343,10 +343,11 @@ #define __NR_pwritev 334 #define __NR_rt_tgsigqueueinfo 335 #define __NR_perf_event_open 336 +#define __NR_setns 337 #ifdef __KERNEL__ -#define NR_syscalls 337 +#define NR_syscalls 338 #define __ARCH_WANT_IPC_PARSE_VERSION /* #define __ARCH_WANT_OLD_READDIR */ diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S index 63d579bf1c2..017d6d7b784 100644 --- a/arch/frv/kernel/entry.S +++ b/arch/frv/kernel/entry.S @@ -1526,5 +1526,6 @@ sys_call_table: .long sys_pwritev .long sys_rt_tgsigqueueinfo /* 335 */ .long sys_perf_event_open + .long sys_setns syscall_table_size = (. - sys_call_table) diff --git a/arch/h8300/include/asm/unistd.h b/arch/h8300/include/asm/unistd.h index 50f2c5a3659..2c3f8e60b1e 100644 --- a/arch/h8300/include/asm/unistd.h +++ b/arch/h8300/include/asm/unistd.h @@ -325,10 +325,11 @@ #define __NR_move_pages 317 #define __NR_getcpu 318 #define __NR_epoll_pwait 319 +#define __NR_setns 320 #ifdef __KERNEL__ -#define NR_syscalls 320 +#define NR_syscalls 321 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/h8300/kernel/syscalls.S b/arch/h8300/kernel/syscalls.S index faefaff7d43..f4b2e67bcc3 100644 --- a/arch/h8300/kernel/syscalls.S +++ b/arch/h8300/kernel/syscalls.S @@ -333,6 +333,7 @@ SYMBOL_NAME_LABEL(sys_call_table) .long SYMBOL_NAME(sys_ni_syscall) /* sys_move_pages */ .long SYMBOL_NAME(sys_getcpu) .long SYMBOL_NAME(sys_ni_syscall) /* sys_epoll_pwait */ + .long SYMBOL_NAME(sys_setns) /* 320 */ .macro call_sp addr mov.l #SYMBOL_NAME(\addr),er6 diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h index 404d037c5e1..1cf0f496f74 100644 --- a/arch/ia64/include/asm/unistd.h +++ b/arch/ia64/include/asm/unistd.h @@ -319,11 +319,12 @@ #define __NR_open_by_handle_at 1327 #define __NR_clock_adjtime 1328 #define __NR_syncfs 1329 +#define __NR_setns 1330 #ifdef __KERNEL__ -#define NR_syscalls 306 /* length of syscall table */ +#define NR_syscalls 307 /* length of syscall table */ /* * The following defines stop scripts/checksyscalls.sh from complaining about diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 6de2e23b363..9ca80193cd4 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1775,6 +1775,7 @@ sys_call_table: data8 sys_open_by_handle_at data8 sys_clock_adjtime data8 sys_syncfs + data8 sys_setns // 1330 .org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */ diff --git a/arch/m32r/include/asm/unistd.h b/arch/m32r/include/asm/unistd.h index c70545689da..3e1db561aac 100644 --- a/arch/m32r/include/asm/unistd.h +++ b/arch/m32r/include/asm/unistd.h @@ -330,10 +330,11 @@ /* #define __NR_timerfd 322 removed */ #define __NR_eventfd 323 #define __NR_fallocate 324 +#define __NR_setns 325 #ifdef __KERNEL__ -#define NR_syscalls 325 +#define NR_syscalls 326 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_STAT64 diff --git a/arch/m32r/kernel/syscall_table.S b/arch/m32r/kernel/syscall_table.S index 60536e27123..528f2e6ad06 100644 --- a/arch/m32r/kernel/syscall_table.S +++ b/arch/m32r/kernel/syscall_table.S @@ -324,3 +324,4 @@ ENTRY(sys_call_table) .long sys_ni_syscall .long sys_eventfd .long sys_fallocate + .long sys_setns /* 325 */ diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index f3b649de2a1..43f984e9397 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -349,10 +349,11 @@ #define __NR_open_by_handle_at 341 #define __NR_clock_adjtime 342 #define __NR_syncfs 343 +#define __NR_setns 344 #ifdef __KERNEL__ -#define NR_syscalls 344 +#define NR_syscalls 345 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S index 6f7b09122a0..00d1452f957 100644 --- a/arch/m68k/kernel/syscalltable.S +++ b/arch/m68k/kernel/syscalltable.S @@ -364,4 +364,5 @@ ENTRY(sys_call_table) .long sys_open_by_handle_at .long sys_clock_adjtime .long sys_syncfs + .long sys_setns diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h index 30edd61a6b8..7d7092b917a 100644 --- a/arch/microblaze/include/asm/unistd.h +++ b/arch/microblaze/include/asm/unistd.h @@ -390,8 +390,9 @@ #define __NR_open_by_handle_at 372 #define __NR_clock_adjtime 373 #define __NR_syncfs 374 +#define __NR_setns 375 -#define __NR_syscalls 375 +#define __NR_syscalls 376 #ifdef __KERNEL__ #ifndef __ASSEMBLY__ diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c index 00ee90f0834..b15cc219b1d 100644 --- a/arch/microblaze/kernel/prom.c +++ b/arch/microblaze/kernel/prom.c @@ -130,7 +130,7 @@ void __init early_init_devtree(void *params) * device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... */ - of_scan_flat_dt(early_init_dt_scan_chosen, NULL); + of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line); /* Scan memory nodes and rebuild MEMBLOCKs */ memblock_init(); diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index 85cea81d1ca..d915a122c86 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -379,3 +379,4 @@ ENTRY(sys_call_table) .long sys_open_by_handle_at .long sys_clock_adjtime .long sys_syncfs + .long sys_setns /* 375 */ diff --git a/arch/mips/cavium-octeon/flash_setup.c b/arch/mips/cavium-octeon/flash_setup.c index 008f657116e..0ee02f5e51c 100644 --- a/arch/mips/cavium-octeon/flash_setup.c +++ b/arch/mips/cavium-octeon/flash_setup.c @@ -16,7 +16,6 @@ static struct map_info flash_map; static struct mtd_info *mymtd; -#ifdef CONFIG_MTD_PARTITIONS static int nr_parts; static struct mtd_partition *parts; static const char *part_probe_types[] = { @@ -26,7 +25,6 @@ static const char *part_probe_types[] = { #endif NULL }; -#endif /** * Module/ driver initialization. @@ -63,17 +61,10 @@ static int __init flash_init(void) if (mymtd) { mymtd->owner = THIS_MODULE; -#ifdef CONFIG_MTD_PARTITIONS nr_parts = parse_mtd_partitions(mymtd, part_probe_types, &parts, 0); - if (nr_parts > 0) - add_mtd_partitions(mymtd, parts, nr_parts); - else - add_mtd_device(mymtd); -#else - add_mtd_device(mymtd); -#endif + mtd_device_register(mymtd, parts, nr_parts); } else { pr_err("Failed to register MTD device for flash\n"); } diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h index f29b862d9db..857d9b7858a 100644 --- a/arch/mips/include/asm/prom.h +++ b/arch/mips/include/asm/prom.h @@ -14,9 +14,6 @@ #ifdef CONFIG_OF #include <asm/bootinfo.h> -/* which is compatible with the flattened device tree (FDT) */ -#define cmd_line arcs_cmdline - extern int early_init_dt_scan_memory_arch(unsigned long node, const char *uname, int depth, void *data); diff --git a/arch/mips/include/asm/suspend.h b/arch/mips/include/asm/suspend.h index 294cdb66c5f..3adac3b53d1 100644 --- a/arch/mips/include/asm/suspend.h +++ b/arch/mips/include/asm/suspend.h @@ -1,8 +1,6 @@ #ifndef __ASM_SUSPEND_H #define __ASM_SUSPEND_H -static inline int arch_prepare_suspend(void) { return 0; } - /* References to section boundaries */ extern const void __nosave_begin, __nosave_end; diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h index fa2e37ea2be..6fcfc480e9d 100644 --- a/arch/mips/include/asm/unistd.h +++ b/arch/mips/include/asm/unistd.h @@ -363,16 +363,17 @@ #define __NR_open_by_handle_at (__NR_Linux + 340) #define __NR_clock_adjtime (__NR_Linux + 341) #define __NR_syncfs (__NR_Linux + 342) +#define __NR_setns (__NR_Linux + 343) /* * Offset of the last Linux o32 flavoured syscall */ -#define __NR_Linux_syscalls 342 +#define __NR_Linux_syscalls 343 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ #define __NR_O32_Linux 4000 -#define __NR_O32_Linux_syscalls 342 +#define __NR_O32_Linux_syscalls 343 #if _MIPS_SIM == _MIPS_SIM_ABI64 @@ -682,16 +683,17 @@ #define __NR_open_by_handle_at (__NR_Linux + 299) #define __NR_clock_adjtime (__NR_Linux + 300) #define __NR_syncfs (__NR_Linux + 301) +#define __NR_setns (__NR_Linux + 302) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 301 +#define __NR_Linux_syscalls 302 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 301 +#define __NR_64_Linux_syscalls 302 #if _MIPS_SIM == _MIPS_SIM_NABI32 @@ -1006,16 +1008,17 @@ #define __NR_open_by_handle_at (__NR_Linux + 304) #define __NR_clock_adjtime (__NR_Linux + 305) #define __NR_syncfs (__NR_Linux + 306) +#define __NR_setns (__NR_Linux + 307) /* * Offset of the last N32 flavoured syscall */ -#define __NR_Linux_syscalls 306 +#define __NR_Linux_syscalls 307 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ #define __NR_N32_Linux 6000 -#define __NR_N32_Linux_syscalls 306 +#define __NR_N32_Linux_syscalls 307 #ifdef __KERNEL__ diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c index a19811e98a4..5b7eade41fa 100644 --- a/arch/mips/kernel/prom.c +++ b/arch/mips/kernel/prom.c @@ -83,7 +83,8 @@ void __init early_init_devtree(void *params) * device-tree, including the platform type, initrd location and * size, and more ... */ - of_scan_flat_dt(early_init_dt_scan_chosen, NULL); + of_scan_flat_dt(early_init_dt_scan_chosen, arcs_cmdline); + /* Scan memory nodes */ of_scan_flat_dt(early_init_dt_scan_root, NULL); diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 7a8e1dd7f6f..99e656e425f 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -589,6 +589,7 @@ einval: li v0, -ENOSYS sys sys_open_by_handle_at 3 /* 4340 */ sys sys_clock_adjtime 2 sys sys_syncfs 1 + sys sys_setns 2 .endm /* We pre-compute the number of _instruction_ bytes needed to diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index 2d31c83224f..fb0575f47f3 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -428,4 +428,5 @@ sys_call_table: PTR sys_open_by_handle_at PTR sys_clock_adjtime /* 5300 */ PTR sys_syncfs + PTR sys_setns .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 38a0503b9a4..4de0c5534e7 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -428,4 +428,5 @@ EXPORT(sysn32_call_table) PTR sys_open_by_handle_at PTR compat_sys_clock_adjtime /* 6305 */ PTR sys_syncfs + PTR sys_setns .size sysn32_call_table,.-sysn32_call_table diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 91ea5e4041d..4a387de08bf 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -546,4 +546,5 @@ sys_call_table: PTR compat_sys_open_by_handle_at /* 4340 */ PTR compat_sys_clock_adjtime PTR sys_syncfs + PTR sys_setns .size sys_call_table,.-sys_call_table diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 812816c4566..ec38e00b255 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -639,7 +639,6 @@ void __init txx9_physmap_flash_init(int no, unsigned long addr, .flags = IORESOURCE_MEM, }; struct platform_device *pdev; -#ifdef CONFIG_MTD_PARTITIONS static struct mtd_partition parts[2]; struct physmap_flash_data pdata_part; @@ -658,7 +657,7 @@ void __init txx9_physmap_flash_init(int no, unsigned long addr, pdata_part.parts = parts; pdata = &pdata_part; } -#endif + pdev = platform_device_alloc("physmap-flash", no); if (!pdev || platform_device_add_resources(pdev, &res, 1) || diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h index 9d056f51592..9051f921cbc 100644 --- a/arch/mn10300/include/asm/unistd.h +++ b/arch/mn10300/include/asm/unistd.h @@ -349,10 +349,11 @@ #define __NR_rt_tgsigqueueinfo 336 #define __NR_perf_event_open 337 #define __NR_recvmmsg 338 +#define __NR_setns 339 #ifdef __KERNEL__ -#define NR_syscalls 339 +#define NR_syscalls 340 /* * specify the deprecated syscalls we want to support on this arch diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index fb93ad720b8..ae435e1d566 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -759,6 +759,7 @@ ENTRY(sys_call_table) .long sys_rt_tgsigqueueinfo .long sys_perf_event_open .long sys_recvmmsg + .long sys_setns nr_syscalls=(.-sys_call_table)/4 diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h index 9cbc2c3bf63..3392de3e7be 100644 --- a/arch/parisc/include/asm/unistd.h +++ b/arch/parisc/include/asm/unistd.h @@ -820,8 +820,9 @@ #define __NR_name_to_handle_at (__NR_Linux + 325) #define __NR_open_by_handle_at (__NR_Linux + 326) #define __NR_syncfs (__NR_Linux + 327) +#define __NR_setns (__NR_Linux + 328) -#define __NR_Linux_syscalls (__NR_syncfs + 1) +#define __NR_Linux_syscalls (__NR_setns + 1) #define __IGNORE_select /* newselect */ diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index a5b02ce4d41..34a4f5a2fff 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -426,6 +426,7 @@ ENTRY_SAME(name_to_handle_at) /* 325 */ ENTRY_COMP(open_by_handle_at) ENTRY_SAME(syncfs) + ENTRY_SAME(setns) /* Nothing yet */ diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h index 5c1bf346674..8a0b5ece8f7 100644 --- a/arch/powerpc/include/asm/fsl_lbc.h +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -157,6 +157,8 @@ struct fsl_lbc_regs { #define LBCR_EPAR_SHIFT 16 #define LBCR_BMT 0x0000FF00 #define LBCR_BMT_SHIFT 8 +#define LBCR_BMTPS 0x0000000F +#define LBCR_BMTPS_SHIFT 0 #define LBCR_INIT 0x00040000 __be32 lcrr; /**< Clock Ratio Register */ #define LCRR_DBYP 0x80000000 diff --git a/arch/powerpc/include/asm/rio.h b/arch/powerpc/include/asm/rio.h index 0018bf80cb2..d902abd3399 100644 --- a/arch/powerpc/include/asm/rio.h +++ b/arch/powerpc/include/asm/rio.h @@ -14,5 +14,10 @@ #define ASM_PPC_RIO_H extern void platform_rio_init(void); +#ifdef CONFIG_RAPIDIO +extern int fsl_rio_mcheck_exception(struct pt_regs *); +#else +static inline int fsl_rio_mcheck_exception(struct pt_regs *regs) {return 0; } +#endif #endif /* ASM_PPC_RIO_H */ diff --git a/arch/powerpc/include/asm/suspend.h b/arch/powerpc/include/asm/suspend.h deleted file mode 100644 index c6efc3466aa..00000000000 --- a/arch/powerpc/include/asm/suspend.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_POWERPC_SUSPEND_H -#define __ASM_POWERPC_SUSPEND_H - -static inline int arch_prepare_suspend(void) { return 0; } - -#endif /* __ASM_POWERPC_SUSPEND_H */ diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index 8489d372077..f6736b7da46 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -353,3 +353,4 @@ COMPAT_SYS_SPU(open_by_handle_at) COMPAT_SYS_SPU(clock_adjtime) SYSCALL_SPU(syncfs) COMPAT_SYS_SPU(sendmmsg) +SYSCALL_SPU(setns) diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h index 6d23c8193ca..b8b3f599362 100644 --- a/arch/powerpc/include/asm/unistd.h +++ b/arch/powerpc/include/asm/unistd.h @@ -372,10 +372,11 @@ #define __NR_clock_adjtime 347 #define __NR_syncfs 348 #define __NR_sendmmsg 349 +#define __NR_setns 350 #ifdef __KERNEL__ -#define __NR_syscalls 350 +#define __NR_syscalls 351 #define __NR__exit __NR_exit #define NR_syscalls __NR_syscalls diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 48aeb55faae..f2c906b1d8d 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -694,7 +694,7 @@ void __init early_init_devtree(void *params) * device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... */ - of_scan_flat_dt(early_init_dt_scan_chosen_ppc, NULL); + of_scan_flat_dt(early_init_dt_scan_chosen_ppc, cmd_line); /* Scan memory nodes and rebuild MEMBLOCKs */ memblock_init(); diff --git a/arch/powerpc/kernel/swsusp.c b/arch/powerpc/kernel/swsusp.c index 560c9611950..aa17b76dd42 100644 --- a/arch/powerpc/kernel/swsusp.c +++ b/arch/powerpc/kernel/swsusp.c @@ -10,7 +10,6 @@ */ #include <linux/sched.h> -#include <asm/suspend.h> #include <asm/system.h> #include <asm/current.h> #include <asm/mmu_context.h> diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index b13306b0d92..0ff4ab98d50 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -55,6 +55,7 @@ #endif #include <asm/kexec.h> #include <asm/ppc-opcode.h> +#include <asm/rio.h> #if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC) int (*__debugger)(struct pt_regs *regs) __read_mostly; @@ -424,6 +425,12 @@ int machine_check_e500mc(struct pt_regs *regs) unsigned long reason = mcsr; int recoverable = 1; + if (reason & MCSR_BUS_RBERR) { + recoverable = fsl_rio_mcheck_exception(regs); + if (recoverable == 1) + goto silent_out; + } + printk("Machine check in kernel mode.\n"); printk("Caused by (from MCSR=%lx): ", reason); @@ -499,6 +506,7 @@ int machine_check_e500mc(struct pt_regs *regs) reason & MCSR_MEA ? "Effective" : "Physical", addr); } +silent_out: mtspr(SPRN_MCSR, mcsr); return mfspr(SPRN_MCSR) == 0 && recoverable; } @@ -507,6 +515,11 @@ int machine_check_e500(struct pt_regs *regs) { unsigned long reason = get_mc_reason(regs); + if (reason & MCSR_BUS_RBERR) { + if (fsl_rio_mcheck_exception(regs)) + return 1; + } + printk("Machine check in kernel mode.\n"); printk("Caused by (from MCSR=%lx): ", reason); diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c index 4fcb5a4e60d..0608b1657da 100644 --- a/arch/powerpc/sysdev/fsl_lbc.c +++ b/arch/powerpc/sysdev/fsl_lbc.c @@ -184,7 +184,8 @@ int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base, u32 mar) } EXPORT_SYMBOL(fsl_upm_run_pattern); -static int __devinit fsl_lbc_ctrl_init(struct fsl_lbc_ctrl *ctrl) +static int __devinit fsl_lbc_ctrl_init(struct fsl_lbc_ctrl *ctrl, + struct device_node *node) { struct fsl_lbc_regs __iomem *lbc = ctrl->regs; @@ -198,6 +199,10 @@ static int __devinit fsl_lbc_ctrl_init(struct fsl_lbc_ctrl *ctrl) /* Enable interrupts for any detected events */ out_be32(&lbc->lteir, LTEIR_ENABLE); + /* Set the monitor timeout value to the maximum for erratum A001 */ + if (of_device_is_compatible(node, "fsl,elbc")) + clrsetbits_be32(&lbc->lbcr, LBCR_BMT, LBCR_BMTPS); + return 0; } @@ -304,7 +309,7 @@ static int __devinit fsl_lbc_ctrl_probe(struct platform_device *dev) fsl_lbc_ctrl_dev->dev = &dev->dev; - ret = fsl_lbc_ctrl_init(fsl_lbc_ctrl_dev); + ret = fsl_lbc_ctrl_init(fsl_lbc_ctrl_dev, dev->dev.of_node); if (ret < 0) goto err; diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 49798532b47..5b206a2fe17 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -10,7 +10,7 @@ * - Added Port-Write message handling * - Added Machine Check exception handling * - * Copyright (C) 2007, 2008 Freescale Semiconductor, Inc. + * Copyright (C) 2007, 2008, 2010 Freescale Semiconductor, Inc. * Zhang Wei <wei.zhang@freescale.com> * * Copyright 2005 MontaVista Software, Inc. @@ -47,15 +47,33 @@ #define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq) #define IRQ_RIO_PW(m) (((struct rio_priv *)(m->priv))->pwirq) +#define IPWSR_CLEAR 0x98 +#define OMSR_CLEAR 0x1cb3 +#define IMSR_CLEAR 0x491 +#define IDSR_CLEAR 0x91 +#define ODSR_CLEAR 0x1c00 +#define LTLEECSR_ENABLE_ALL 0xFFC000FC +#define ESCSR_CLEAR 0x07120204 + +#define RIO_PORT1_EDCSR 0x0640 +#define RIO_PORT2_EDCSR 0x0680 +#define RIO_PORT1_IECSR 0x10130 +#define RIO_PORT2_IECSR 0x101B0 +#define RIO_IM0SR 0x13064 +#define RIO_IM1SR 0x13164 +#define RIO_OM0SR 0x13004 +#define RIO_OM1SR 0x13104 + #define RIO_ATMU_REGS_OFFSET 0x10c00 #define RIO_P_MSG_REGS_OFFSET 0x11000 #define RIO_S_MSG_REGS_OFFSET 0x13000 #define RIO_GCCSR 0x13c #define RIO_ESCSR 0x158 +#define RIO_PORT2_ESCSR 0x178 #define RIO_CCSR 0x15c #define RIO_LTLEDCSR 0x0608 -#define RIO_LTLEDCSR_IER 0x80000000 -#define RIO_LTLEDCSR_PRT 0x01000000 +#define RIO_LTLEDCSR_IER 0x80000000 +#define RIO_LTLEDCSR_PRT 0x01000000 #define RIO_LTLEECSR 0x060c #define RIO_EPWISR 0x10010 #define RIO_ISR_AACR 0x10120 @@ -88,7 +106,10 @@ #define RIO_IPWSR_PWD 0x00000008 #define RIO_IPWSR_PWB 0x00000004 -#define RIO_EPWISR_PINT 0x80000000 +/* EPWISR Error match value */ +#define RIO_EPWISR_PINT1 0x80000000 +#define RIO_EPWISR_PINT2 0x40000000 +#define RIO_EPWISR_MU 0x00000002 #define RIO_EPWISR_PW 0x00000001 #define RIO_MSG_DESC_SIZE 32 @@ -260,9 +281,7 @@ struct rio_priv { static void __iomem *rio_regs_win; #ifdef CONFIG_E500 -static int (*saved_mcheck_exception)(struct pt_regs *regs); - -static int fsl_rio_mcheck_exception(struct pt_regs *regs) +int fsl_rio_mcheck_exception(struct pt_regs *regs) { const struct exception_table_entry *entry = NULL; unsigned long reason = mfspr(SPRN_MCSR); @@ -284,11 +303,9 @@ static int fsl_rio_mcheck_exception(struct pt_regs *regs) } } - if (saved_mcheck_exception) - return saved_mcheck_exception(regs); - else - return cur_cpu_spec->machine_check(regs); + return 0; } +EXPORT_SYMBOL_GPL(fsl_rio_mcheck_exception); #endif /** @@ -1064,6 +1081,40 @@ static int fsl_rio_doorbell_init(struct rio_mport *mport) return rc; } +static void port_error_handler(struct rio_mport *port, int offset) +{ + /*XXX: Error recovery is not implemented, we just clear errors */ + out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0); + + if (offset == 0) { + out_be32((u32 *)(rio_regs_win + RIO_PORT1_EDCSR), 0); + out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), 0); + out_be32((u32 *)(rio_regs_win + RIO_ESCSR), ESCSR_CLEAR); + } else { + out_be32((u32 *)(rio_regs_win + RIO_PORT2_EDCSR), 0); + out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), 0); + out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR); + } +} + +static void msg_unit_error_handler(struct rio_mport *port) +{ + struct rio_priv *priv = port->priv; + + /*XXX: Error recovery is not implemented, we just clear errors */ + out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0); + + out_be32((u32 *)(rio_regs_win + RIO_IM0SR), IMSR_CLEAR); + out_be32((u32 *)(rio_regs_win + RIO_IM1SR), IMSR_CLEAR); + out_be32((u32 *)(rio_regs_win + RIO_OM0SR), OMSR_CLEAR); + out_be32((u32 *)(rio_regs_win + RIO_OM1SR), OMSR_CLEAR); + + out_be32(&priv->msg_regs->odsr, ODSR_CLEAR); + out_be32(&priv->msg_regs->dsr, IDSR_CLEAR); + + out_be32(&priv->msg_regs->pwsr, IPWSR_CLEAR); +} + /** * fsl_rio_port_write_handler - MPC85xx port write interrupt handler * @irq: Linux interrupt number @@ -1144,10 +1195,22 @@ fsl_rio_port_write_handler(int irq, void *dev_instance) } pw_done: - if (epwisr & RIO_EPWISR_PINT) { + if (epwisr & RIO_EPWISR_PINT1) { + tmp = in_be32(priv->regs_win + RIO_LTLEDCSR); + pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp); + port_error_handler(port, 0); + } + + if (epwisr & RIO_EPWISR_PINT2) { tmp = in_be32(priv->regs_win + RIO_LTLEDCSR); pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp); - out_be32(priv->regs_win + RIO_LTLEDCSR, 0); + port_error_handler(port, 1); + } + + if (epwisr & RIO_EPWISR_MU) { + tmp = in_be32(priv->regs_win + RIO_LTLEDCSR); + pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp); + msg_unit_error_handler(port); } return IRQ_HANDLED; @@ -1258,12 +1321,14 @@ static int fsl_rio_port_write_init(struct rio_mport *mport) /* Hook up port-write handler */ - rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler, 0, - "port-write", (void *)mport); + rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler, + IRQF_SHARED, "port-write", (void *)mport); if (rc < 0) { pr_err("MPC85xx RIO: unable to request inbound doorbell irq"); goto err_out; } + /* Enable Error Interrupt */ + out_be32((u32 *)(rio_regs_win + RIO_LTLEECSR), LTLEECSR_ENABLE_ALL); INIT_WORK(&priv->pw_work, fsl_pw_dpc); spin_lock_init(&priv->pw_fifo_lock); @@ -1538,11 +1603,6 @@ int fsl_rio_setup(struct platform_device *dev) fsl_rio_doorbell_init(port); fsl_rio_port_write_init(port); -#ifdef CONFIG_E500 - saved_mcheck_exception = ppc_md.machine_check_exception; - ppc_md.machine_check_exception = fsl_rio_mcheck_exception; -#endif - return 0; err: iounmap(priv->regs_win); diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index ff2d2371b2e..9fab2aa9c2c 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -2,7 +2,7 @@ config MMU def_bool y config ZONE_DMA - def_bool y if 64BIT + def_bool y config LOCKDEP_SUPPORT def_bool y diff --git a/arch/s390/appldata/appldata_mem.c b/arch/s390/appldata/appldata_mem.c index e43fe753703..f7d3dc555bd 100644 --- a/arch/s390/appldata/appldata_mem.c +++ b/arch/s390/appldata/appldata_mem.c @@ -92,9 +92,7 @@ static void appldata_get_mem_data(void *data) mem_data->pswpin = ev[PSWPIN]; mem_data->pswpout = ev[PSWPOUT]; mem_data->pgalloc = ev[PGALLOC_NORMAL]; -#ifdef CONFIG_ZONE_DMA mem_data->pgalloc += ev[PGALLOC_DMA]; -#endif mem_data->pgfault = ev[PGFAULT]; mem_data->pgmajfault = ev[PGMAJFAULT]; diff --git a/arch/s390/include/asm/delay.h b/arch/s390/include/asm/delay.h index 8a096b83f51..0e3b35f96be 100644 --- a/arch/s390/include/asm/delay.h +++ b/arch/s390/include/asm/delay.h @@ -14,10 +14,12 @@ #ifndef _S390_DELAY_H #define _S390_DELAY_H -extern void __udelay(unsigned long long usecs); -extern void udelay_simple(unsigned long long usecs); -extern void __delay(unsigned long loops); +void __ndelay(unsigned long long nsecs); +void __udelay(unsigned long long usecs); +void udelay_simple(unsigned long long usecs); +void __delay(unsigned long loops); +#define ndelay(n) __ndelay((unsigned long long) (n)) #define udelay(n) __udelay((unsigned long long) (n)) #define mdelay(n) __udelay((unsigned long long) (n) * 1000) diff --git a/arch/s390/include/asm/irq.h b/arch/s390/include/asm/irq.h index 1544b90bd6d..ba7b01c726a 100644 --- a/arch/s390/include/asm/irq.h +++ b/arch/s390/include/asm/irq.h @@ -2,6 +2,7 @@ #define _ASM_IRQ_H #include <linux/hardirq.h> +#include <linux/types.h> enum interruption_class { EXTERNAL_INTERRUPT, @@ -31,4 +32,11 @@ enum interruption_class { NR_IRQS, }; +typedef void (*ext_int_handler_t)(unsigned int, unsigned int, unsigned long); + +int register_external_interrupt(u16 code, ext_int_handler_t handler); +int unregister_external_interrupt(u16 code, ext_int_handler_t handler); +void service_subclass_irq_register(void); +void service_subclass_irq_unregister(void); + #endif /* _ASM_IRQ_H */ diff --git a/arch/s390/include/asm/s390_ext.h b/arch/s390/include/asm/s390_ext.h deleted file mode 100644 index 080876d5f19..00000000000 --- a/arch/s390/include/asm/s390_ext.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright IBM Corp. 1999,2010 - * Author(s): Holger Smolinski <Holger.Smolinski@de.ibm.com>, - * Martin Schwidefsky <schwidefsky@de.ibm.com>, - */ - -#ifndef _S390_EXTINT_H -#define _S390_EXTINT_H - -#include <linux/types.h> - -typedef void (*ext_int_handler_t)(unsigned int, unsigned int, unsigned long); - -int register_external_interrupt(__u16 code, ext_int_handler_t handler); -int unregister_external_interrupt(__u16 code, ext_int_handler_t handler); - -#endif /* _S390_EXTINT_H */ diff --git a/arch/s390/include/asm/suspend.h b/arch/s390/include/asm/suspend.h deleted file mode 100644 index dc75c616eaf..00000000000 --- a/arch/s390/include/asm/suspend.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __ASM_S390_SUSPEND_H -#define __ASM_S390_SUSPEND_H - -static inline int arch_prepare_suspend(void) -{ - return 0; -} - -#endif - diff --git a/arch/s390/include/asm/topology.h b/arch/s390/include/asm/topology.h index c5338834ddb..005d77d8ae2 100644 --- a/arch/s390/include/asm/topology.h +++ b/arch/s390/include/asm/topology.h @@ -7,7 +7,7 @@ extern unsigned char cpu_core_id[NR_CPUS]; extern cpumask_t cpu_core_map[NR_CPUS]; -static inline const struct cpumask *cpu_coregroup_mask(unsigned int cpu) +static inline const struct cpumask *cpu_coregroup_mask(int cpu) { return &cpu_core_map[cpu]; } @@ -21,7 +21,7 @@ static inline const struct cpumask *cpu_coregroup_mask(unsigned int cpu) extern unsigned char cpu_book_id[NR_CPUS]; extern cpumask_t cpu_book_map[NR_CPUS]; -static inline const struct cpumask *cpu_book_mask(unsigned int cpu) +static inline const struct cpumask *cpu_book_mask(int cpu) { return &cpu_book_map[cpu]; } diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h index 2d9ea11f919..2b23885e81e 100644 --- a/arch/s390/include/asm/uaccess.h +++ b/arch/s390/include/asm/uaccess.h @@ -49,12 +49,13 @@ #define segment_eq(a,b) ((a).ar4 == (b).ar4) +#define __access_ok(addr, size) \ +({ \ + __chk_user_ptr(addr); \ + 1; \ +}) -static inline int __access_ok(const void __user *addr, unsigned long size) -{ - return 1; -} -#define access_ok(type,addr,size) __access_ok(addr,size) +#define access_ok(type, addr, size) __access_ok(addr, size) /* * The exception table consists of pairs of addresses: the first is the diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h index 9208e69245a..404bdb9671b 100644 --- a/arch/s390/include/asm/unistd.h +++ b/arch/s390/include/asm/unistd.h @@ -276,7 +276,8 @@ #define __NR_open_by_handle_at 336 #define __NR_clock_adjtime 337 #define __NR_syncfs 338 -#define NR_syscalls 339 +#define __NR_setns 339 +#define NR_syscalls 340 /* * There are some system calls that are not present on 64 bit, some diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index 5ff15dacb57..df3732249ba 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -20,10 +20,10 @@ CFLAGS_ptrace.o += -DUTS_MACHINE='"$(UTS_MACHINE)"' CFLAGS_sysinfo.o += -Iinclude/math-emu -Iarch/s390/math-emu -w -obj-y := bitmap.o traps.o time.o process.o base.o early.o setup.o \ - processor.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \ - s390_ext.o debug.o irq.o ipl.o dis.o diag.o mem_detect.o \ - vdso.o vtime.o sysinfo.o nmi.o sclp.o jump_label.o +obj-y := bitmap.o traps.o time.o process.o base.o early.o setup.o vtime.o \ + processor.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o nmi.o \ + debug.o irq.o ipl.o dis.o diag.o mem_detect.o sclp.o vdso.o \ + sysinfo.o jump_label.o obj-y += $(if $(CONFIG_64BIT),entry64.o,entry.o) obj-y += $(if $(CONFIG_64BIT),reipl64.o,reipl.o) diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 1dc96ea08fa..1f5eb789c3a 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1904,3 +1904,9 @@ compat_sys_clock_adjtime_wrapper: sys_syncfs_wrapper: lgfr %r2,%r2 # int jg sys_syncfs + + .globl sys_setns_wrapper +sys_setns_wrapper: + lgfr %r2,%r2 # int + lgfr %r3,%r3 # int + jg sys_setns diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c index 3d4a78fc1ad..1ca3d1d6a86 100644 --- a/arch/s390/kernel/dis.c +++ b/arch/s390/kernel/dis.c @@ -30,9 +30,9 @@ #include <asm/atomic.h> #include <asm/mathemu.h> #include <asm/cpcmd.h> -#include <asm/s390_ext.h> #include <asm/lowcore.h> #include <asm/debug.h> +#include <asm/irq.h> #ifndef CONFIG_64BIT #define ONELONG "%08lx: " diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c index e204f9597aa..e3264f6a972 100644 --- a/arch/s390/kernel/irq.c +++ b/arch/s390/kernel/irq.c @@ -1,19 +1,28 @@ /* - * Copyright IBM Corp. 2004,2010 - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), - * Thomas Spatzier (tspat@de.ibm.com) + * Copyright IBM Corp. 2004,2011 + * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>, + * Holger Smolinski <Holger.Smolinski@de.ibm.com>, + * Thomas Spatzier <tspat@de.ibm.com>, * * This file contains interrupt related functions. */ -#include <linux/module.h> -#include <linux/kernel.h> #include <linux/kernel_stat.h> #include <linux/interrupt.h> #include <linux/seq_file.h> -#include <linux/cpu.h> #include <linux/proc_fs.h> #include <linux/profile.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/ftrace.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/cpu.h> +#include <asm/irq_regs.h> +#include <asm/cputime.h> +#include <asm/lowcore.h> +#include <asm/irq.h> +#include "entry.h" struct irq_class { char *name; @@ -82,8 +91,7 @@ int show_interrupts(struct seq_file *p, void *v) * For compatibilty only. S/390 specific setup of interrupts et al. is done * much later in init_channel_subsystem(). */ -void __init -init_IRQ(void) +void __init init_IRQ(void) { /* nothing... */ } @@ -134,3 +142,116 @@ void init_irq_proc(void) create_prof_cpu_mask(root_irq_dir); } #endif + +/* + * ext_int_hash[index] is the start of the list for all external interrupts + * that hash to this index. With the current set of external interrupts + * (0x1202 external call, 0x1004 cpu timer, 0x2401 hwc console, 0x4000 + * iucv and 0x2603 pfault) this is always the first element. + */ + +struct ext_int_info { + struct ext_int_info *next; + ext_int_handler_t handler; + u16 code; +}; + +static struct ext_int_info *ext_int_hash[256]; + +static inline int ext_hash(u16 code) +{ + return (code + (code >> 9)) & 0xff; +} + +int register_external_interrupt(u16 code, ext_int_handler_t handler) +{ + struct ext_int_info *p; + int index; + + p = kmalloc(sizeof(*p), GFP_ATOMIC); + if (!p) + return -ENOMEM; + p->code = code; + p->handler = handler; + index = ext_hash(code); + p->next = ext_int_hash[index]; + ext_int_hash[index] = p; + return 0; +} +EXPORT_SYMBOL(register_external_interrupt); + +int unregister_external_interrupt(u16 code, ext_int_handler_t handler) +{ + struct ext_int_info *p, *q; + int index; + + index = ext_hash(code); + q = NULL; + p = ext_int_hash[index]; + while (p) { + if (p->code == code && p->handler == handler) + break; + q = p; + p = p->next; + } + if (!p) + return -ENOENT; + if (q) + q->next = p->next; + else + ext_int_hash[index] = p->next; + kfree(p); + return 0; +} +EXPORT_SYMBOL(unregister_external_interrupt); + +void __irq_entry do_extint(struct pt_regs *regs, unsigned int ext_int_code, + unsigned int param32, unsigned long param64) +{ + struct pt_regs *old_regs; + unsigned short code; + struct ext_int_info *p; + int index; + + code = (unsigned short) ext_int_code; + old_regs = set_irq_regs(regs); + s390_idle_check(regs, S390_lowcore.int_clock, + S390_lowcore.async_enter_timer); + irq_enter(); + if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator) + /* Serve timer interrupts first. */ + clock_comparator_work(); + kstat_cpu(smp_processor_id()).irqs[EXTERNAL_INTERRUPT]++; + if (code != 0x1004) + __get_cpu_var(s390_idle).nohz_delay = 1; + index = ext_hash(code); + for (p = ext_int_hash[index]; p; p = p->next) { + if (likely(p->code == code)) + p->handler(ext_int_code, param32, param64); + } + irq_exit(); + set_irq_regs(old_regs); +} + +static DEFINE_SPINLOCK(sc_irq_lock); +static int sc_irq_refcount; + +void service_subclass_irq_register(void) +{ + spin_lock(&sc_irq_lock); + if (!sc_irq_refcount) + ctl_set_bit(0, 9); + sc_irq_refcount++; + spin_unlock(&sc_irq_lock); +} +EXPORT_SYMBOL(service_subclass_irq_register); + +void service_subclass_irq_unregister(void) +{ + spin_lock(&sc_irq_lock); + sc_irq_refcount--; + if (!sc_irq_refcount) + ctl_clear_bit(0, 9); + spin_unlock(&sc_irq_lock); +} +EXPORT_SYMBOL(service_subclass_irq_unregister); diff --git a/arch/s390/kernel/s390_ext.c b/arch/s390/kernel/s390_ext.c deleted file mode 100644 index 185029919c4..00000000000 --- a/arch/s390/kernel/s390_ext.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * Copyright IBM Corp. 1999,2010 - * Author(s): Holger Smolinski <Holger.Smolinski@de.ibm.com>, - * Martin Schwidefsky <schwidefsky@de.ibm.com>, - */ - -#include <linux/kernel_stat.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/ftrace.h> -#include <linux/errno.h> -#include <linux/slab.h> -#include <asm/s390_ext.h> -#include <asm/irq_regs.h> -#include <asm/cputime.h> -#include <asm/lowcore.h> -#include <asm/irq.h> -#include "entry.h" - -struct ext_int_info { - struct ext_int_info *next; - ext_int_handler_t handler; - __u16 code; -}; - -/* - * ext_int_hash[index] is the start of the list for all external interrupts - * that hash to this index. With the current set of external interrupts - * (0x1202 external call, 0x1004 cpu timer, 0x2401 hwc console, 0x4000 - * iucv and 0x2603 pfault) this is always the first element. - */ -static struct ext_int_info *ext_int_hash[256]; - -static inline int ext_hash(__u16 code) -{ - return (code + (code >> 9)) & 0xff; -} - -int register_external_interrupt(__u16 code, ext_int_handler_t handler) -{ - struct ext_int_info *p; - int index; - - p = kmalloc(sizeof(*p), GFP_ATOMIC); - if (!p) - return -ENOMEM; - p->code = code; - p->handler = handler; - index = ext_hash(code); - p->next = ext_int_hash[index]; - ext_int_hash[index] = p; - return 0; -} -EXPORT_SYMBOL(register_external_interrupt); - -int unregister_external_interrupt(__u16 code, ext_int_handler_t handler) -{ - struct ext_int_info *p, *q; - int index; - - index = ext_hash(code); - q = NULL; - p = ext_int_hash[index]; - while (p) { - if (p->code == code && p->handler == handler) - break; - q = p; - p = p->next; - } - if (!p) - return -ENOENT; - if (q) - q->next = p->next; - else - ext_int_hash[index] = p->next; - kfree(p); - return 0; -} -EXPORT_SYMBOL(unregister_external_interrupt); - -void __irq_entry do_extint(struct pt_regs *regs, unsigned int ext_int_code, - unsigned int param32, unsigned long param64) -{ - struct pt_regs *old_regs; - unsigned short code; - struct ext_int_info *p; - int index; - - code = (unsigned short) ext_int_code; - old_regs = set_irq_regs(regs); - s390_idle_check(regs, S390_lowcore.int_clock, - S390_lowcore.async_enter_timer); - irq_enter(); - if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator) - /* Serve timer interrupts first. */ - clock_comparator_work(); - kstat_cpu(smp_processor_id()).irqs[EXTERNAL_INTERRUPT]++; - if (code != 0x1004) - __get_cpu_var(s390_idle).nohz_delay = 1; - index = ext_hash(code); - for (p = ext_int_hash[index]; p; p = p->next) { - if (likely(p->code == code)) - p->handler(ext_int_code, param32, param64); - } - irq_exit(); - set_irq_regs(old_regs); -} diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index f8e85ecbc45..52420d2785b 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -44,7 +44,6 @@ #include <asm/sigp.h> #include <asm/pgalloc.h> #include <asm/irq.h> -#include <asm/s390_ext.h> #include <asm/cpcmd.h> #include <asm/tlbflush.h> #include <asm/timer.h> diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index 9c65fd4ddce..6ee39ef8fe4 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -347,3 +347,4 @@ SYSCALL(sys_name_to_handle_at,sys_name_to_handle_at,sys_name_to_handle_at_wrappe SYSCALL(sys_open_by_handle_at,sys_open_by_handle_at,compat_sys_open_by_handle_at_wrapper) SYSCALL(sys_clock_adjtime,sys_clock_adjtime,compat_sys_clock_adjtime_wrapper) SYSCALL(sys_syncfs,sys_syncfs,sys_syncfs_wrapper) +SYSCALL(sys_setns,sys_setns,sys_setns_wrapper) diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index a59557f1fb5..dff933065ab 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -41,7 +41,6 @@ #include <linux/kprobes.h> #include <asm/uaccess.h> #include <asm/delay.h> -#include <asm/s390_ext.h> #include <asm/div64.h> #include <asm/vdso.h> #include <asm/irq.h> diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c index 2eafb8c7a74..0cd340b7263 100644 --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -17,7 +17,6 @@ #include <linux/smp.h> #include <linux/cpuset.h> #include <asm/delay.h> -#include <asm/s390_ext.h> #define PTF_HORIZONTAL (0UL) #define PTF_VERTICAL (1UL) diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c index b5a4a739b47..a65d2e82f61 100644 --- a/arch/s390/kernel/traps.c +++ b/arch/s390/kernel/traps.c @@ -39,7 +39,6 @@ #include <asm/atomic.h> #include <asm/mathemu.h> #include <asm/cpcmd.h> -#include <asm/s390_ext.h> #include <asm/lowcore.h> #include <asm/debug.h> #include "entry.h" diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index 5e8ead4b4ab..2d6228f60cd 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -22,10 +22,10 @@ #include <linux/cpu.h> #include <linux/kprobes.h> -#include <asm/s390_ext.h> #include <asm/timer.h> #include <asm/irq_regs.h> #include <asm/cputime.h> +#include <asm/irq.h> static DEFINE_PER_CPU(struct vtimer_queue, virt_cpu_timer); diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c index 0f53110e1d0..a65229d91c9 100644 --- a/arch/s390/lib/delay.c +++ b/arch/s390/lib/delay.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <linux/irqflags.h> #include <linux/interrupt.h> +#include <asm/div64.h> void __delay(unsigned long loops) { @@ -116,3 +117,17 @@ void udelay_simple(unsigned long long usecs) while (get_clock() < end) cpu_relax(); } + +void __ndelay(unsigned long long nsecs) +{ + u64 end; + + nsecs <<= 9; + do_div(nsecs, 125); + end = get_clock() + nsecs; + if (nsecs & ~0xfffUL) + __udelay(nsecs >> 12); + while (get_clock() < end) + barrier(); +} +EXPORT_SYMBOL(__ndelay); diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index a0f9e730f26..fe103e891e7 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -34,7 +34,7 @@ #include <asm/asm-offsets.h> #include <asm/system.h> #include <asm/pgtable.h> -#include <asm/s390_ext.h> +#include <asm/irq.h> #include <asm/mmu_context.h> #include <asm/compat.h> #include "../kernel/entry.h" @@ -245,9 +245,12 @@ static noinline void do_fault_error(struct pt_regs *regs, long int_code, do_no_context(regs, int_code, trans_exc_code); break; default: /* fault & VM_FAULT_ERROR */ - if (fault & VM_FAULT_OOM) - pagefault_out_of_memory(); - else if (fault & VM_FAULT_SIGBUS) { + if (fault & VM_FAULT_OOM) { + if (!(regs->psw.mask & PSW_MASK_PSTATE)) + do_no_context(regs, int_code, trans_exc_code); + else + pagefault_out_of_memory(); + } else if (fault & VM_FAULT_SIGBUS) { /* Kernel mode? Handle exceptions or die */ if (!(regs->psw.mask & PSW_MASK_PSTATE)) do_no_context(regs, int_code, trans_exc_code); @@ -277,7 +280,8 @@ static inline int do_exception(struct pt_regs *regs, int access, struct mm_struct *mm; struct vm_area_struct *vma; unsigned long address; - int fault, write; + unsigned int flags; + int fault; if (notify_page_fault(regs)) return 0; @@ -296,6 +300,10 @@ static inline int do_exception(struct pt_regs *regs, int access, address = trans_exc_code & __FAIL_ADDR_MASK; perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address); + flags = FAULT_FLAG_ALLOW_RETRY; + if (access == VM_WRITE || (trans_exc_code & store_indication) == 0x400) + flags |= FAULT_FLAG_WRITE; +retry: down_read(&mm->mmap_sem); fault = VM_FAULT_BADMAP; @@ -325,21 +333,31 @@ static inline int do_exception(struct pt_regs *regs, int access, * make sure we exit gracefully rather than endlessly redo * the fault. */ - write = (access == VM_WRITE || - (trans_exc_code & store_indication) == 0x400) ? - FAULT_FLAG_WRITE : 0; - fault = handle_mm_fault(mm, vma, address, write); + fault = handle_mm_fault(mm, vma, address, flags); if (unlikely(fault & VM_FAULT_ERROR)) goto out_up; - if (fault & VM_FAULT_MAJOR) { - tsk->maj_flt++; - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, - regs, address); - } else { - tsk->min_flt++; - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, - regs, address); + /* + * Major/minor page fault accounting is only done on the + * initial attempt. If we go through a retry, it is extremely + * likely that the page will be found in page cache at that point. + */ + if (flags & FAULT_FLAG_ALLOW_RETRY) { + if (fault & VM_FAULT_MAJOR) { + tsk->maj_flt++; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, + regs, address); + } else { + tsk->min_flt++; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, + regs, address); + } + if (fault & VM_FAULT_RETRY) { + /* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk + * of starvation. */ + flags &= ~FAULT_FLAG_ALLOW_RETRY; + goto retry; + } } /* * The instruction that caused the program check will @@ -429,10 +447,9 @@ int __handle_fault(unsigned long uaddr, unsigned long pgm_int_code, int write) access = write ? VM_WRITE : VM_READ; fault = do_exception(®s, access, uaddr | 2); if (unlikely(fault)) { - if (fault & VM_FAULT_OOM) { - pagefault_out_of_memory(); - fault = 0; - } else if (fault & VM_FAULT_SIGBUS) + if (fault & VM_FAULT_OOM) + return -EFAULT; + else if (fault & VM_FAULT_SIGBUS) do_sigbus(®s, pgm_int_code, uaddr); } return fault ? -EFAULT : 0; @@ -485,7 +502,6 @@ int pfault_init(void) "2:\n" EX_TABLE(0b,1b) : "=d" (rc) : "a" (&refbk), "m" (refbk) : "cc"); - __ctl_set_bit(0, 9); return rc; } @@ -500,7 +516,6 @@ void pfault_fini(void) if (!MACHINE_IS_VM || pfault_disable) return; - __ctl_clear_bit(0,9); asm volatile( " diag %0,0,0x258\n" "0:\n" @@ -615,6 +630,7 @@ static int __init pfault_irq_init(void) rc = pfault_init() == 0 ? 0 : -EOPNOTSUPP; if (rc) goto out_pfault; + service_subclass_irq_register(); hotcpu_notifier(pfault_cpu_notify, 0); return 0; diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index dfefc217169..59b663109d9 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -119,9 +119,7 @@ void __init paging_init(void) sparse_memory_present_with_active_regions(MAX_NUMNODES); sparse_init(); memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); -#ifdef CONFIG_ZONE_DMA max_zone_pfns[ZONE_DMA] = PFN_DOWN(MAX_DMA_ADDRESS); -#endif max_zone_pfns[ZONE_NORMAL] = max_low_pfn; free_area_init_nodes(max_zone_pfns); fault_init(); diff --git a/arch/s390/mm/maccess.c b/arch/s390/mm/maccess.c index 71a4b0d34be..51e5cd9b906 100644 --- a/arch/s390/mm/maccess.c +++ b/arch/s390/mm/maccess.c @@ -19,7 +19,7 @@ * using the stura instruction. * Returns the number of bytes copied or -EFAULT. */ -static long probe_kernel_write_odd(void *dst, void *src, size_t size) +static long probe_kernel_write_odd(void *dst, const void *src, size_t size) { unsigned long count, aligned; int offset, mask; @@ -45,7 +45,7 @@ static long probe_kernel_write_odd(void *dst, void *src, size_t size) return rc ? rc : count; } -long probe_kernel_write(void *dst, void *src, size_t size) +long probe_kernel_write(void *dst, const void *src, size_t size) { long copied = 0; diff --git a/arch/s390/oprofile/hwsampler.c b/arch/s390/oprofile/hwsampler.c index 053caa0fd27..4552ce40c81 100644 --- a/arch/s390/oprofile/hwsampler.c +++ b/arch/s390/oprofile/hwsampler.c @@ -19,7 +19,7 @@ #include <linux/oprofile.h> #include <asm/lowcore.h> -#include <asm/s390_ext.h> +#include <asm/irq.h> #include "hwsampler.h" @@ -580,7 +580,7 @@ static int hws_cpu_callback(struct notifier_block *nfb, { /* We do not have sampler space available for all possible CPUs. All CPUs should be online when hw sampling is activated. */ - return NOTIFY_BAD; + return (hws_state <= HWS_DEALLOCATED) ? NOTIFY_OK : NOTIFY_BAD; } static struct notifier_block hws_cpu_notifier = { diff --git a/arch/sh/include/asm/suspend.h b/arch/sh/include/asm/suspend.h index 64eb41a063e..e14567a7e9a 100644 --- a/arch/sh/include/asm/suspend.h +++ b/arch/sh/include/asm/suspend.h @@ -3,7 +3,6 @@ #ifndef __ASSEMBLY__ #include <linux/notifier.h> -static inline int arch_prepare_suspend(void) { return 0; } #include <asm/ptrace.h> diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h index bb7d2702c2c..3432008d288 100644 --- a/arch/sh/include/asm/unistd_32.h +++ b/arch/sh/include/asm/unistd_32.h @@ -374,8 +374,9 @@ #define __NR_clock_adjtime 361 #define __NR_syncfs 362 #define __NR_sendmmsg 363 +#define __NR_setns 364 -#define NR_syscalls 364 +#define NR_syscalls 365 #ifdef __KERNEL__ diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h index 46327cea1e5..ec9898665f2 100644 --- a/arch/sh/include/asm/unistd_64.h +++ b/arch/sh/include/asm/unistd_64.h @@ -395,10 +395,11 @@ #define __NR_clock_adjtime 372 #define __NR_syncfs 373 #define __NR_sendmmsg 374 +#define __NR_setns 375 #ifdef __KERNEL__ -#define NR_syscalls 375 +#define NR_syscalls 376 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S index 7c486f3e3a3..39b051de4c7 100644 --- a/arch/sh/kernel/syscalls_32.S +++ b/arch/sh/kernel/syscalls_32.S @@ -381,3 +381,4 @@ ENTRY(sys_call_table) .long sys_clock_adjtime .long sys_syncfs .long sys_sendmmsg + .long sys_setns diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S index ba1a737afe8..089c4d825d0 100644 --- a/arch/sh/kernel/syscalls_64.S +++ b/arch/sh/kernel/syscalls_64.S @@ -401,3 +401,4 @@ sys_call_table: .long sys_clock_adjtime .long sys_syncfs .long sys_sendmmsg + .long sys_setns /* 375 */ diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h index c5387ed0add..6260d5deeab 100644 --- a/arch/sparc/include/asm/unistd.h +++ b/arch/sparc/include/asm/unistd.h @@ -405,8 +405,9 @@ #define __NR_clock_adjtime 334 #define __NR_syncfs 335 #define __NR_sendmmsg 336 +#define __NR_setns 337 -#define NR_syscalls 337 +#define NR_syscalls 338 #ifdef __32bit_syscall_numbers__ /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants, diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S index 332c83ff770..6e492d59f6b 100644 --- a/arch/sparc/kernel/systbls_32.S +++ b/arch/sparc/kernel/systbls_32.S @@ -84,4 +84,4 @@ sys_call_table: /*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv /*325*/ .long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init /*330*/ .long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime -/*335*/ .long sys_syncfs, sys_sendmmsg +/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index 43887ca0be0..f566518483b 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -85,7 +85,7 @@ sys_call_table32: /*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv .word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init /*330*/ .word sys32_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime - .word sys_syncfs, compat_sys_sendmmsg + .word sys_syncfs, compat_sys_sendmmsg, sys_setns #endif /* CONFIG_COMPAT */ @@ -162,4 +162,4 @@ sys_call_table: /*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv .word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init /*330*/ .word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime - .word sys_syncfs, sys_sendmmsg + .word sys_syncfs, sys_sendmmsg, sys_setns diff --git a/arch/unicore32/include/asm/suspend.h b/arch/unicore32/include/asm/suspend.h index 88a9c0f32b2..65bad75c7e9 100644 --- a/arch/unicore32/include/asm/suspend.h +++ b/arch/unicore32/include/asm/suspend.h @@ -14,7 +14,6 @@ #define __UNICORE_SUSPEND_H__ #ifndef __ASSEMBLY__ -static inline int arch_prepare_suspend(void) { return 0; } #include <asm/ptrace.h> diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index 95f5826be45..c1870dddd32 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -849,4 +849,5 @@ ia32_sys_call_table: .quad compat_sys_clock_adjtime .quad sys_syncfs .quad compat_sys_sendmmsg /* 345 */ + .quad sys_setns ia32_syscall_end: diff --git a/arch/x86/include/asm/suspend_32.h b/arch/x86/include/asm/suspend_32.h index fd921c3a684..487055c8c1a 100644 --- a/arch/x86/include/asm/suspend_32.h +++ b/arch/x86/include/asm/suspend_32.h @@ -9,8 +9,6 @@ #include <asm/desc.h> #include <asm/i387.h> -static inline int arch_prepare_suspend(void) { return 0; } - /* image of the saved processor state */ struct saved_context { u16 es, fs, gs, ss; diff --git a/arch/x86/include/asm/suspend_64.h b/arch/x86/include/asm/suspend_64.h index 8d942afae68..09b0bf10415 100644 --- a/arch/x86/include/asm/suspend_64.h +++ b/arch/x86/include/asm/suspend_64.h @@ -9,11 +9,6 @@ #include <asm/desc.h> #include <asm/i387.h> -static inline int arch_prepare_suspend(void) -{ - return 0; -} - /* * Image of the saved processor state, used by the low level ACPI suspend to * RAM code and by the low level hibernation code. diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h index fb6a625c99b..593485b38ab 100644 --- a/arch/x86/include/asm/unistd_32.h +++ b/arch/x86/include/asm/unistd_32.h @@ -351,10 +351,11 @@ #define __NR_clock_adjtime 343 #define __NR_syncfs 344 #define __NR_sendmmsg 345 +#define __NR_setns 346 #ifdef __KERNEL__ -#define NR_syscalls 346 +#define NR_syscalls 347 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h index 79f90eb15aa..705bf139288 100644 --- a/arch/x86/include/asm/unistd_64.h +++ b/arch/x86/include/asm/unistd_64.h @@ -679,6 +679,8 @@ __SYSCALL(__NR_clock_adjtime, sys_clock_adjtime) __SYSCALL(__NR_syncfs, sys_syncfs) #define __NR_sendmmsg 307 __SYSCALL(__NR_sendmmsg, sys_sendmmsg) +#define __NR_setns 308 +__SYSCALL(__NR_setns, sys_setns) #ifndef __NO_STUBS #define __ARCH_WANT_OLD_READDIR diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 0ba15a6cc57..c9a281f272f 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -123,7 +123,7 @@ static unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr) static atomic_t nmi_running = ATOMIC_INIT(0); static int mod_code_status; /* holds return value of text write */ static void *mod_code_ip; /* holds the IP to write to */ -static void *mod_code_newcode; /* holds the text to write to the IP */ +static const void *mod_code_newcode; /* holds the text to write to the IP */ static unsigned nmi_wait_count; static atomic_t nmi_update_count = ATOMIC_INIT(0); @@ -225,7 +225,7 @@ within(unsigned long addr, unsigned long start, unsigned long end) } static int -do_ftrace_mod_code(unsigned long ip, void *new_code) +do_ftrace_mod_code(unsigned long ip, const void *new_code) { /* * On x86_64, kernel text mappings are mapped read-only with @@ -266,8 +266,8 @@ static const unsigned char *ftrace_nop_replace(void) } static int -ftrace_modify_code(unsigned long ip, unsigned char *old_code, - unsigned char *new_code) +ftrace_modify_code(unsigned long ip, unsigned const char *old_code, + unsigned const char *new_code) { unsigned char replaced[MCOUNT_INSN_SIZE]; @@ -301,7 +301,7 @@ ftrace_modify_code(unsigned long ip, unsigned char *old_code, int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, unsigned long addr) { - unsigned char *new, *old; + unsigned const char *new, *old; unsigned long ip = rec->ip; old = ftrace_call_replace(ip, addr); @@ -312,7 +312,7 @@ int ftrace_make_nop(struct module *mod, int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) { - unsigned char *new, *old; + unsigned const char *new, *old; unsigned long ip = rec->ip; old = ftrace_nop_replace(); diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S index 32cbffb0c49..fbb0a045a1a 100644 --- a/arch/x86/kernel/syscall_table_32.S +++ b/arch/x86/kernel/syscall_table_32.S @@ -345,3 +345,4 @@ ENTRY(sys_call_table) .long sys_clock_adjtime .long sys_syncfs .long sys_sendmmsg /* 345 */ + .long sys_setns diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c index c3b8e24f2b1..9fd8a567fe1 100644 --- a/arch/x86/oprofile/op_model_amd.c +++ b/arch/x86/oprofile/op_model_amd.c @@ -316,16 +316,23 @@ static void op_amd_stop_ibs(void) wrmsrl(MSR_AMD64_IBSOPCTL, 0); } -static inline int eilvt_is_available(int offset) +static inline int get_eilvt(int offset) { - /* check if we may assign a vector */ return !setup_APIC_eilvt(offset, 0, APIC_EILVT_MSG_NMI, 1); } +static inline int put_eilvt(int offset) +{ + return !setup_APIC_eilvt(offset, 0, 0, 1); +} + static inline int ibs_eilvt_valid(void) { int offset; u64 val; + int valid = 0; + + preempt_disable(); rdmsrl(MSR_AMD64_IBSCTL, val); offset = val & IBSCTL_LVT_OFFSET_MASK; @@ -333,16 +340,20 @@ static inline int ibs_eilvt_valid(void) if (!(val & IBSCTL_LVT_OFFSET_VALID)) { pr_err(FW_BUG "cpu %d, invalid IBS interrupt offset %d (MSR%08X=0x%016llx)\n", smp_processor_id(), offset, MSR_AMD64_IBSCTL, val); - return 0; + goto out; } - if (!eilvt_is_available(offset)) { + if (!get_eilvt(offset)) { pr_err(FW_BUG "cpu %d, IBS interrupt offset %d not available (MSR%08X=0x%016llx)\n", smp_processor_id(), offset, MSR_AMD64_IBSCTL, val); - return 0; + goto out; } - return 1; + valid = 1; +out: + preempt_enable(); + + return valid; } static inline int get_ibs_offset(void) @@ -600,67 +611,69 @@ static int setup_ibs_ctl(int ibs_eilvt_off) static int force_ibs_eilvt_setup(void) { - int i; + int offset; int ret; - /* find the next free available EILVT entry */ - for (i = 1; i < 4; i++) { - if (!eilvt_is_available(i)) - continue; - ret = setup_ibs_ctl(i); - if (ret) - return ret; - pr_err(FW_BUG "using offset %d for IBS interrupts\n", i); - return 0; + /* + * find the next free available EILVT entry, skip offset 0, + * pin search to this cpu + */ + preempt_disable(); + for (offset = 1; offset < APIC_EILVT_NR_MAX; offset++) { + if (get_eilvt(offset)) + break; } + preempt_enable(); - printk(KERN_DEBUG "No EILVT entry available\n"); - - return -EBUSY; -} - -static int __init_ibs_nmi(void) -{ - int ret; - - if (ibs_eilvt_valid()) - return 0; + if (offset == APIC_EILVT_NR_MAX) { + printk(KERN_DEBUG "No EILVT entry available\n"); + return -EBUSY; + } - ret = force_ibs_eilvt_setup(); + ret = setup_ibs_ctl(offset); if (ret) - return ret; + goto out; - if (!ibs_eilvt_valid()) - return -EFAULT; + if (!ibs_eilvt_valid()) { + ret = -EFAULT; + goto out; + } + pr_err(FW_BUG "using offset %d for IBS interrupts\n", offset); pr_err(FW_BUG "workaround enabled for IBS LVT offset\n"); return 0; +out: + preempt_disable(); + put_eilvt(offset); + preempt_enable(); + return ret; } /* * check and reserve APIC extended interrupt LVT offset for IBS if * available - * - * init_ibs() preforms implicitly cpu-local operations, so pin this - * thread to its current CPU */ static void init_ibs(void) { - preempt_disable(); - ibs_caps = get_ibs_caps(); + if (!ibs_caps) + return; + + if (ibs_eilvt_valid()) goto out; - if (__init_ibs_nmi() < 0) - ibs_caps = 0; - else - printk(KERN_INFO "oprofile: AMD IBS detected (0x%08x)\n", ibs_caps); + if (!force_ibs_eilvt_setup()) + goto out; + + /* Failed to setup ibs */ + ibs_caps = 0; + return; out: - preempt_enable(); + printk(KERN_INFO "oprofile: AMD IBS detected (0x%08x)\n", ibs_caps); } static int (*create_arch_files)(struct super_block *sb, struct dentry *root); diff --git a/arch/xtensa/include/asm/unistd.h b/arch/xtensa/include/asm/unistd.h index 528042c2951..a6f934f37f1 100644 --- a/arch/xtensa/include/asm/unistd.h +++ b/arch/xtensa/include/asm/unistd.h @@ -683,8 +683,10 @@ __SYSCALL(305, sys_ni_syscall, 0) __SYSCALL(306, sys_eventfd, 1) #define __NR_recvmmsg 307 __SYSCALL(307, sys_recvmmsg, 5) +#define __NR_setns 308 +__SYSCALL(308, sys_setns, 2) -#define __NR_syscall_count 308 +#define __NR_syscall_count 309 /* * sysxtensa syscall handler |