13 files changed, 63 insertions, 85 deletions
diff --git a/arch/i386/.gitignore b/arch/i386/.gitignore
deleted file mode 100644
index 36ef4c374d2..00000000000
--- a/arch/i386/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-boot
diff --git a/arch/i386/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 0e2adadf590..0e2adadf590 100644
--- a/arch/i386/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
diff --git a/arch/i386/Kconfig.debug b/arch/x86/Kconfig.debug
index f03531eacdf..970b2defe7d 100644
--- a/arch/i386/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -1,14 +1,14 @@
 menu "Kernel hacking"
 
 config TRACE_IRQFLAGS_SUPPORT
-	bool
-	default y
+	def_bool y
 
 source "lib/Kconfig.debug"
 
 config EARLY_PRINTK
 	bool "Early printk" if EMBEDDED && DEBUG_KERNEL
 	default y
+	depends on X86_32
 	help
 	  Write kernel log output directly into the VGA buffer or to a serial
 	  port.
@@ -37,10 +37,12 @@ config DEBUG_STACK_USAGE
 
 comment "Page alloc debug is incompatible with Software Suspend on i386"
 	depends on DEBUG_KERNEL && HIBERNATION
+	depends on X86_32
 
 config DEBUG_PAGEALLOC
 	bool "Debug page memory allocations"
 	depends on DEBUG_KERNEL && !HIBERNATION && !HUGETLBFS
+	depends on X86_32
 	help
 	  Unmap pages from the kernel linear mapping after free_pages().
 	  This results in a large slowdown, but helps to find certain types
@@ -59,6 +61,7 @@ config DEBUG_RODATA
 config 4KSTACKS
 	bool "Use 4Kb for kernel stacks instead of 8Kb"
 	depends on DEBUG_KERNEL
+	depends on X86_32
 	help
 	  If you say Y here the kernel will use a 4Kb stacksize for the
 	  kernel stack attached to each process/thread. This facilitates
@@ -67,22 +70,50 @@ config 4KSTACKS
 	  will also use IRQ stacks to compensate for the reduced stackspace.
 
 config X86_FIND_SMP_CONFIG
-	bool
+	def_bool y
 	depends on X86_LOCAL_APIC || X86_VOYAGER
-	default y
+	depends on X86_32
 
 config X86_MPPARSE
-	bool
+	def_bool y
 	depends on X86_LOCAL_APIC && !X86_VISWS
-	default y
+	depends on X86_32
 
 config DOUBLEFAULT
 	default y
 	bool "Enable doublefault exception handler" if EMBEDDED
+	depends on X86_32
+	help
+	  This option allows trapping of rare doublefault exceptions that
+	  would otherwise cause a system to silently reboot. Disabling this
+	  option saves about 4k and might cause you much additional grey
+	  hair.
+
+config IOMMU_DEBUG
+	bool "Enable IOMMU debugging"
+	depends on IOMMU && DEBUG_KERNEL
+	depends on X86_64
 	help
-          This option allows trapping of rare doublefault exceptions that
-          would otherwise cause a system to silently reboot. Disabling this
-          option saves about 4k and might cause you much additional grey
-          hair.
+	  Force the IOMMU to on even when you have less than 4GB of
+	  memory and add debugging code. On overflow always panic. And
+	  allow to enable IOMMU leak tracing. Can be disabled at boot
+	  time with iommu=noforce. This will also enable scatter gather
+	  list merging.  Currently not recommended for production
+	  code. When you use it make sure you have a big enough
+	  IOMMU/AGP aperture.  Most of the options enabled by this can
+	  be set more finegrained using the iommu= command line
+	  options. See Documentation/x86_64/boot-options.txt for more
+	  details.
+
+config IOMMU_LEAK
+	bool "IOMMU leak tracing"
+	depends on DEBUG_KERNEL
+	depends on IOMMU_DEBUG
+	help
+	  Add a simple leak tracer to the IOMMU code. This is useful when you
+	  are debugging a buggy device driver that leaks IOMMU mappings.
+
+#config X86_REMOTE_DEBUG
+#	bool "kgdb debugging stub"
 
 endmenu
diff --git a/arch/i386/Kconfig b/arch/x86/Kconfig.i386
index b4437ce0f97..7331efe891a 100644
--- a/arch/i386/Kconfig
+++ b/arch/x86/Kconfig.i386
@@ -287,7 +287,7 @@ config ES7000_CLUSTERED_APIC
 	default y
 	depends on SMP && X86_ES7000 && MPENTIUMIII
 
-source "arch/i386/Kconfig.cpu"
+source "arch/x86/Kconfig.cpu"
 
 config HPET_TIMER
 	bool "HPET Timer Support"
@@ -1272,7 +1272,7 @@ source "fs/Kconfig"
 
 source "kernel/Kconfig.instrumentation"
 
-source "arch/i386/Kconfig.debug"
+source "arch/x86/Kconfig.debug"
 
 source "security/Kconfig"
 
diff --git a/arch/x86_64/Kconfig b/arch/x86/Kconfig.x86_64
index 308970aa538..e2542e5b536 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86/Kconfig.x86_64
@@ -835,7 +835,7 @@ source fs/Kconfig
 
 source "kernel/Kconfig.instrumentation"
 
-source "arch/x86_64/Kconfig.debug"
+source "arch/x86/Kconfig.debug"
 
 source "security/Kconfig"
 
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
new file mode 100644
index 00000000000..309597386a7
--- /dev/null
+++ b/arch/x86/Makefile
@@ -0,0 +1,16 @@
+# Unified Makefile for i386 and x86_64
+
+# select defconfig based on actual architecture
+KBUILD_DEFCONFIG := $(ARCH)_defconfig
+
+# # No need to remake these files
+$(srctree)/arch/x86/Makefile%: ;
+
+ifeq ($(ARCH),i386)
+        include $(srctree)/arch/x86/Makefile_32
+else
+        include $(srctree)/arch/x86/Makefile_64
+endif
+
+
+
diff --git a/arch/i386/Makefile b/arch/x86/Makefile_32
index f5b9a37def8..346ac076687 100644
--- a/arch/i386/Makefile
+++ b/arch/x86/Makefile_32
@@ -1,5 +1,5 @@
 #
-# i386/Makefile
+# i386 Makefile
 #
 # This file is included by the global makefile so that you can add your own
 # architecture-specific flags and dependencies. Remember to do have actions
@@ -17,9 +17,6 @@
 # 20050320  Kianusch Sayah Karadji <kianusch@sk-tech.net>
 #           Added support for GEODE CPU
 
-# Fill in SRCARCH
-SRCARCH	:= x86
-
 # BITS is used as extension for files which are available in a 32 bit
 # and a 64 bit version to simplify shared Makefiles.
 # e.g.: obj-y += foo_$(BITS).o
@@ -46,7 +43,7 @@ KBUILD_CFLAGS += -pipe -msoft-float -mregparm=3 -freg-struct-return
 KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
 
 # CPU-specific tuning. Anything which can be shared with UML should go here.
-include $(srctree)/arch/i386/Makefile.cpu
+include $(srctree)/arch/x86/Makefile_32.cpu
 
 # temporary until string.h is fixed
 cflags-y += -ffreestanding
diff --git a/arch/i386/Makefile.cpu b/arch/x86/Makefile_32.cpu
index e372b584e91..e372b584e91 100644
--- a/arch/i386/Makefile.cpu
+++ b/arch/x86/Makefile_32.cpu
diff --git a/arch/x86_64/Makefile b/arch/x86/Makefile_64
index 20eb69bd5a6..57e714a47af 100644
--- a/arch/x86_64/Makefile
+++ b/arch/x86/Makefile_64
@@ -1,5 +1,5 @@
 #
-# x86_64/Makefile
+# x86_64 Makefile
 #
 # This file is included by the global makefile so that you can add your own
 # architecture-specific flags and dependencies. Remember to do have actions
@@ -21,9 +21,6 @@
 #
 # $Id: Makefile,v 1.31 2002/03/22 15:56:07 ak Exp $
 
-# Fill in SRCARCH
-SRCARCH	:= x86
-
 # BITS is used as extension for files which are available in a 32 bit
 # and a 64 bit version to simplify shared Makefiles.
 # e.g.: obj-y += foo_$(BITS).o
diff --git a/arch/i386/defconfig b/arch/x86/configs/i386_defconfig
index 54ee1764fda..54ee1764fda 100644
--- a/arch/i386/defconfig
+++ b/arch/x86/configs/i386_defconfig
diff --git a/arch/x86_64/defconfig b/arch/x86/configs/x86_64_defconfig
index b091c5e3555..b091c5e3555 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86/configs/x86_64_defconfig
diff --git a/arch/x86_64/.gitignore b/arch/x86_64/.gitignore
deleted file mode 100644
index 36ef4c374d2..00000000000
--- a/arch/x86_64/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-boot
diff --git a/arch/x86_64/Kconfig.debug b/arch/x86_64/Kconfig.debug
deleted file mode 100644
index 775d211a5cf..00000000000
--- a/arch/x86_64/Kconfig.debug
+++ /dev/null
@@ -1,61 +0,0 @@
-menu "Kernel hacking"
-
-config TRACE_IRQFLAGS_SUPPORT
-	bool
-	default y
-
-source "lib/Kconfig.debug"
-
-config DEBUG_RODATA
-       bool "Write protect kernel read-only data structures"
-       depends on DEBUG_KERNEL
-       help
-	 Mark the kernel read-only data as write-protected in the pagetables,
-	 in order to catch accidental (and incorrect) writes to such const data.
-	 This option may have a slight performance impact because a portion
-	 of the kernel code won't be covered by a 2MB TLB anymore.
-	 If in doubt, say "N".
-
-config IOMMU_DEBUG
-       depends on IOMMU && DEBUG_KERNEL
-       bool "Enable IOMMU debugging"
-       help
-         Force the IOMMU to on even when you have less than 4GB of
-	 memory and add debugging code. On overflow always panic. And
-	 allow to enable IOMMU leak tracing. Can be disabled at boot
-	 time with iommu=noforce. This will also enable scatter gather
-	 list merging.  Currently not recommended for production
-	 code. When you use it make sure you have a big enough
-	 IOMMU/AGP aperture.  Most of the options enabled by this can
-	 be set more finegrained using the iommu= command line
-	 options. See Documentation/x86_64/boot-options.txt for more
-	 details.
-
-config IOMMU_LEAK
-       bool "IOMMU leak tracing"
-       depends on DEBUG_KERNEL
-       depends on IOMMU_DEBUG
-       help
-         Add a simple leak tracer to the IOMMU code. This is useful when you
-	 are debugging a buggy device driver that leaks IOMMU mappings.
-
-config DEBUG_STACKOVERFLOW
-        bool "Check for stack overflows"
-        depends on DEBUG_KERNEL
-        help
-	  This option will cause messages to be printed if free stack space
-	  drops below a certain limit.
-
-config DEBUG_STACK_USAGE
-        bool "Stack utilization instrumentation"
-        depends on DEBUG_KERNEL
-        help
-	  Enables the display of the minimum amount of free stack which each
-	  task has ever had available in the sysrq-T and sysrq-P debug output.
-
-	  This option will slow down process creation somewhat.
-
-#config X86_REMOTE_DEBUG
-#       bool "kgdb debugging stub"
-
-endmenu