summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig5
-rw-r--r--arch/arm/boot/compressed/.gitignore1
-rw-r--r--arch/arm/boot/compressed/Makefile13
-rw-r--r--arch/arm/boot/compressed/head-xscale.S5
-rw-r--r--arch/arm/boot/compressed/head.S93
-rw-r--r--arch/arm/common/sharpsl_pm.c2
-rw-r--r--arch/arm/kernel/head-common.S40
-rw-r--r--arch/arm/kernel/head.S7
-rw-r--r--arch/arm/kernel/process.c8
-rw-r--r--arch/arm/kernel/setup.c6
-rw-r--r--arch/arm/mach-at91/board-sam9261ek.c130
-rw-r--r--arch/arm/mach-at91/board-sam9263ek.c64
-rw-r--r--arch/arm/mach-davinci/Makefile3
-rw-r--r--arch/arm/mach-davinci/board-evm.c2
-rw-r--r--arch/arm/mach-davinci/clock.c323
-rw-r--r--arch/arm/mach-davinci/clock.h33
-rw-r--r--arch/arm/mach-davinci/gpio.c286
-rw-r--r--arch/arm/mach-davinci/io.c6
-rw-r--r--arch/arm/mach-davinci/mux.c41
-rw-r--r--arch/arm/mach-davinci/psc.c87
-rw-r--r--arch/arm/mach-imx/generic.c118
-rw-r--r--arch/arm/mach-imx/time.c121
-rw-r--r--arch/arm/mach-iop13xx/tpmi.c32
-rw-r--r--arch/arm/mach-ixp4xx/Kconfig16
-rw-r--r--arch/arm/mach-ixp4xx/Makefile4
-rw-r--r--arch/arm/mach-ixp4xx/gateway7001-pci.c63
-rw-r--r--arch/arm/mach-ixp4xx/gateway7001-setup.c108
-rw-r--r--arch/arm/mach-ixp4xx/gtwx5715-pci.c8
-rw-r--r--arch/arm/mach-ixp4xx/ixdp425-setup.c96
-rw-r--r--arch/arm/mach-ixp4xx/wg302v2-pci.c63
-rw-r--r--arch/arm/mach-ixp4xx/wg302v2-setup.c109
-rw-r--r--arch/arm/mach-ks8695/Makefile2
-rw-r--r--arch/arm/mach-ks8695/gpio.c218
-rw-r--r--arch/arm/mach-pxa/clock.c15
-rw-r--r--arch/arm/mach-pxa/corgi.c7
-rw-r--r--arch/arm/mach-pxa/devices.h11
-rw-r--r--arch/arm/mach-pxa/dma.c44
-rw-r--r--arch/arm/mach-pxa/generic.c93
-rw-r--r--arch/arm/mach-pxa/generic.h6
-rw-r--r--arch/arm/mach-pxa/idp.c3
-rw-r--r--arch/arm/mach-pxa/irq.c106
-rw-r--r--arch/arm/mach-pxa/lpd270.c3
-rw-r--r--arch/arm/mach-pxa/lubbock.c3
-rw-r--r--arch/arm/mach-pxa/mainstone.c3
-rw-r--r--arch/arm/mach-pxa/pm.c47
-rw-r--r--arch/arm/mach-pxa/poodle.c3
-rw-r--r--arch/arm/mach-pxa/pxa25x.c62
-rw-r--r--arch/arm/mach-pxa/pxa27x.c78
-rw-r--r--arch/arm/mach-pxa/spitz.c7
-rw-r--r--arch/arm/mach-pxa/time.c9
-rw-r--r--arch/arm/mach-pxa/tosa.c4
-rw-r--r--arch/arm/mach-pxa/trizeps4.c3
-rw-r--r--arch/arm/mach-s3c2410/mach-bast.c59
-rw-r--r--arch/arm/mach-s3c2440/mach-anubis.c141
-rw-r--r--arch/arm/mach-s3c2440/mach-osiris.c38
-rw-r--r--arch/arm/mach-sa1100/pm.c9
-rw-r--r--arch/arm/mach-sa1100/time.c24
-rw-r--r--arch/arm/mm/ioremap.c10
58 files changed, 2530 insertions, 371 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 482d33f9ce5..b53e1d4bc48 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -241,6 +241,9 @@ config ARCH_H720X
config ARCH_IMX
bool "IMX"
+ select GENERIC_GPIO
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
help
Support for Motorola's i.MX family of processors (MX1, MXL).
@@ -308,6 +311,7 @@ config ARCH_L7200
config ARCH_KS8695
bool "Micrel/Kendin KS8695"
+ select GENERIC_GPIO
help
Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
System-on-Chip devices.
@@ -384,6 +388,7 @@ config ARCH_DAVINCI
bool "TI DaVinci"
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
help
Support for TI's DaVinci platform.
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index aefee20cbf9..b15f927a592 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -1 +1,2 @@
piggy.gz
+font.c
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index adddc713168..a1f1691b67f 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -6,15 +6,13 @@
HEAD = head.o
OBJS = misc.o
-FONTC = drivers/video/console/font_acorn_8x8.c
-
-FONT = $(addprefix ../../../../drivers/video/console/, font_acorn_8x8.o)
+FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c
#
# Architecture dependencies
#
ifeq ($(CONFIG_ARCH_ACORN),y)
-OBJS += ll_char_wr.o $(FONT)
+OBJS += ll_char_wr.o font.o
endif
ifeq ($(CONFIG_ARCH_SHARK),y)
@@ -73,7 +71,7 @@ endif
SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
-targets := vmlinux vmlinux.lds piggy.gz piggy.o $(FONT) \
+targets := vmlinux vmlinux.lds piggy.gz piggy.o font.o font.c \
head.o misc.o $(OBJS)
EXTRA_CFLAGS := -fpic
EXTRA_AFLAGS :=
@@ -105,7 +103,10 @@ $(obj)/piggy.gz: $(obj)/../Image FORCE
$(obj)/piggy.o: $(obj)/piggy.gz FORCE
-CFLAGS_font_acorn_8x8.o := -Dstatic=
+CFLAGS_font.o := -Dstatic=
+
+$(obj)/font.c: $(FONTC)
+ $(call cmd,shipped)
$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config
@sed "$(SEDFLAGS)" < $< > $@
diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S
index 73c5d9e0201..236bbe57831 100644
--- a/arch/arm/boot/compressed/head-xscale.S
+++ b/arch/arm/boot/compressed/head-xscale.S
@@ -41,11 +41,6 @@ __XScale_start:
mov r7, #MACH_TYPE_COTULLA_IDP
#endif
-#ifdef CONFIG_MACH_GTWX5715
- mov r7, #(MACH_TYPE_GTWX5715 & 0xff)
- orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
-#endif
-
#ifdef CONFIG_ARCH_IXP2000
mov r1, #-1
mov r0, #0xd6000000
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 680ea6ed77b..d7fb5ee1637 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -436,6 +436,28 @@ __armv4_mmu_cache_on:
mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
mov pc, r12
+__armv7_mmu_cache_on:
+ mov r12, lr
+ mrc p15, 0, r11, c0, c1, 4 @ read ID_MMFR0
+ tst r11, #0xf @ VMSA
+ blne __setup_mmu
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ tst r11, #0xf @ VMSA
+ mcrne p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
+ mrc p15, 0, r0, c1, c0, 0 @ read control reg
+ orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
+ orr r0, r0, #0x003c @ write buffer
+ orrne r0, r0, #1 @ MMU enabled
+ movne r1, #-1
+ mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer
+ mcrne p15, 0, r1, c3, c0, 0 @ load domain access control
+ mcr p15, 0, r0, c1, c0, 0 @ load control register
+ mrc p15, 0, r0, c1, c0, 0 @ and read it back
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 4 @ ISB
+ mov pc, r12
+
__arm6_mmu_cache_on:
mov r12, lr
bl __setup_mmu
@@ -622,11 +644,17 @@ proc_types:
b __armv4_mmu_cache_flush
.word 0x0007b000 @ ARMv6
- .word 0x0007f000
+ .word 0x000ff000
b __armv4_mmu_cache_on
b __armv4_mmu_cache_off
b __armv6_mmu_cache_flush
+ .word 0x000f0000 @ new CPU Id
+ .word 0x000f0000
+ b __armv7_mmu_cache_on
+ b __armv7_mmu_cache_off
+ b __armv7_mmu_cache_flush
+
.word 0 @ unrecognised type
.word 0
mov pc, lr
@@ -674,6 +702,16 @@ __armv4_mmu_cache_off:
mcr p15, 0, r0, c8, c7 @ invalidate whole TLB v4
mov pc, lr
+__armv7_mmu_cache_off:
+ mrc p15, 0, r0, c1, c0
+ bic r0, r0, #0x000d
+ mcr p15, 0, r0, c1, c0 @ turn MMU and cache off
+ mov r12, lr
+ bl __armv7_mmu_cache_flush
+ mov r0, #0
+ mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB
+ mov pc, r12
+
__arm6_mmu_cache_off:
mov r0, #0x00000030 @ ARM6 control reg.
b __armv3_mmu_cache_off
@@ -730,6 +768,59 @@ __armv6_mmu_cache_flush:
mcr p15, 0, r1, c7, c10, 4 @ drain WB
mov pc, lr
+__armv7_mmu_cache_flush:
+ mrc p15, 0, r10, c0, c1, 5 @ read ID_MMFR1
+ tst r10, #0xf << 16 @ hierarchical cache (ARMv7)
+ beq hierarchical
+ mov r10, #0
+ mcr p15, 0, r10, c7, c14, 0 @ clean+invalidate D
+ b iflush
+hierarchical:
+ stmfd sp!, {r0-r5, r7, r9-r11}
+ mrc p15, 1, r0, c0, c0, 1 @ read clidr
+ ands r3, r0, #0x7000000 @ extract loc from clidr
+ mov r3, r3, lsr #23 @ left align loc bit field
+ beq finished @ if loc is 0, then no need to clean
+ mov r10, #0 @ start clean at cache level 0
+loop1:
+ add r2, r10, r10, lsr #1 @ work out 3x current cache level
+ mov r1, r0, lsr r2 @ extract cache type bits from clidr
+ and r1, r1, #7 @ mask of the bits for current cache only
+ cmp r1, #2 @ see what cache we have at this level
+ blt skip @ skip if no cache, or just i-cache
+ mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
+ mcr p15, 0, r10, c7, c5, 4 @ isb to sych the new cssr&csidr
+ mrc p15, 1, r1, c0, c0, 0 @ read the new csidr
+ and r2, r1, #7 @ extract the length of the cache lines
+ add r2, r2, #4 @ add 4 (line length offset)
+ ldr r4, =0x3ff
+ ands r4, r4, r1, lsr #3 @ find maximum number on the way size
+ .word 0xe16f5f14 @ clz r5, r4 - find bit position of way size increment
+ ldr r7, =0x7fff
+ ands r7, r7, r1, lsr #13 @ extract max number of the index size
+loop2:
+ mov r9, r4 @ create working copy of max way size
+loop3:
+ orr r11, r10, r9, lsl r5 @ factor way and cache number into r11
+ orr r11, r11, r7, lsl r2 @ factor index number into r11
+ mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way
+ subs r9, r9, #1 @ decrement the way
+ bge loop3
+ subs r7, r7, #1 @ decrement the index
+ bge loop2
+skip:
+ add r10, r10, #2 @ increment cache number
+ cmp r3, r10
+ bgt loop1
+finished:
+ mov r10, #0 @ swith back to cache level 0
+ mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
+ ldmfd sp!, {r0-r5, r7, r9-r11}
+iflush:
+ mcr p15, 0, r10, c7, c5, 0 @ invalidate I+BTB
+ mcr p15, 0, r10, c7, c10, 4 @ drain WB
+ mov pc, lr
+
__armv4_mmu_cache_flush:
mov r2, #64*1024 @ default: 32K dcache size (*2)
mov r11, #32 @ default: 32 byte line size
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index 3bf3a927ae2..111a7fa5deb 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -766,9 +766,7 @@ static void sharpsl_apm_get_power_status(struct apm_power_info *info)
}
static struct pm_ops sharpsl_pm_ops = {
- .prepare = pxa_pm_prepare,
.enter = corgi_pxa_pm_enter,
- .finish = pxa_pm_finish,
.valid = pm_valid_only_mem,
};
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index a52da0ddb43..024a9cf469b 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -20,7 +20,8 @@ __switch_data:
.long _end @ r7
.long processor_id @ r4
.long __machine_arch_type @ r5
- .long cr_alignment @ r6
+ .long __atags_pointer @ r6
+ .long cr_alignment @ r7
.long init_thread_union + THREAD_START_SP @ sp
/*
@@ -29,6 +30,7 @@ __switch_data:
*
* r0 = cp#15 control register
* r1 = machine ID
+ * r2 = atags pointer
* r9 = processor ID
*/
.type __mmap_switched, %function
@@ -47,11 +49,12 @@ __mmap_switched:
strcc fp, [r6],#4
bcc 1b
- ldmia r3, {r4, r5, r6, sp}
+ ldmia r3, {r4, r5, r6, r7, sp}
str r9, [r4] @ Save processor ID
str r1, [r5] @ Save machine type
+ str r2, [r6] @ Save atags pointer
bic r4, r0, #CR_A @ Clear 'A' bit
- stmia r6, {r0, r4} @ Save control register values
+ stmia r7, {r0, r4} @ Save control register values
b start_kernel
/*
@@ -215,3 +218,34 @@ ENTRY(lookup_machine_type)
bl __lookup_machine_type
mov r0, r5
ldmfd sp!, {r4 - r6, pc}
+
+/* Determine validity of the r2 atags pointer. The heuristic requires
+ * that the pointer be aligned, in the first 16k of physical RAM and
+ * that the ATAG_CORE marker is first and present. Future revisions
+ * of this function may be more lenient with the physical address and
+ * may also be able to move the ATAGS block if necessary.
+ *
+ * r8 = machinfo
+ *
+ * Returns:
+ * r2 either valid atags pointer, or zero
+ * r5, r6 corrupted
+ */
+
+ .type __vet_atags, %function
+__vet_atags:
+ tst r2, #0x3 @ aligned?
+ bne 1f
+
+ ldr r5, [r2, #0] @ is first tag ATAG_CORE?
+ subs r5, r5, #ATAG_CORE_SIZE
+ bne 1f
+ ldr r5, [r2, #4]
+ ldr r6, =ATAG_CORE
+ cmp r5, r6
+ bne 1f
+
+ mov pc, lr @ atag pointer is ok
+
+1: mov r2, #0
+ mov pc, lr
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 41f98b4ba2e..7898cbc9861 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -29,6 +29,10 @@
#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET)
#define KERNEL_RAM_PADDR (PHYS_OFFSET + TEXT_OFFSET)
+#define ATAG_CORE 0x54410001
+#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
+
+
/*
* swapper_pg_dir is the virtual address of the initial page table.
* We place the page tables 16K below KERNEL_RAM_VADDR. Therefore, we must
@@ -61,7 +65,7 @@
*
* This is normally called from the decompressor code. The requirements
* are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
- * r1 = machine nr.
+ * r1 = machine nr, r2 = atags pointer.
*
* This code is mostly position independent, so if you link the kernel at
* 0xc0008000, you call this at __pa(0xc0008000).
@@ -85,6 +89,7 @@ ENTRY(stext)
bl __lookup_machine_type @ r5=machinfo
movs r8, r5 @ invalid machine (r5=0)?
beq __error_a @ yes, error 'a'
+ bl __vet_atags
bl __create_page_tables
/*
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 842361777d4..93b7f8e22dc 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -44,6 +44,10 @@ static const char *processor_modes[] = {
"UK8_32" , "UK9_32" , "UK10_32", "UND_32" , "UK12_32", "UK13_32", "UK14_32", "SYS_32"
};
+static const char *isa_modes[] = {
+ "ARM" , "Thumb" , "Jazelle", "ThumbEE"
+};
+
extern void setup_mm_for_reboot(char mode);
static volatile int hlt_counter;
@@ -230,11 +234,11 @@ void __show_regs(struct pt_regs *regs)
buf[3] = flags & PSR_V_BIT ? 'V' : 'v';
buf[4] = '\0';
- printk("Flags: %s IRQs o%s FIQs o%s Mode %s%s Segment %s\n",
+ printk("Flags: %s IRQs o%s FIQs o%s Mode %s ISA %s Segment %s\n",
buf, interrupts_enabled(regs) ? "n" : "ff",
fast_interrupts_enabled(regs) ? "n" : "ff",
processor_modes[processor_mode(regs)],
- thumb_mode(regs) ? " (T)" : "",
+ isa_modes[isa_mode(regs)],
get_fs() == get_ds() ? "kernel" : "user");
#ifdef CONFIG_CPU_CP15
{
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 650eac1bc0a..5be2e987b84 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -63,6 +63,8 @@ unsigned int processor_id;
unsigned int __machine_arch_type;
EXPORT_SYMBOL(__machine_arch_type);
+unsigned int __atags_pointer __initdata;
+
unsigned int system_rev;
EXPORT_SYMBOL(system_rev);
@@ -780,7 +782,9 @@ void __init setup_arch(char **cmdline_p)
if (mdesc->soft_reboot)
reboot_setup("s");
- if (mdesc->boot_params)
+ if (__atags_pointer)
+ tags = phys_to_virt(__atags_pointer);
+ else if (mdesc->boot_params)
tags = phys_to_virt(mdesc->boot_params);
/*
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 26ca8ab3f62..42e172cb0f4 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -27,6 +27,11 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/dm9000.h>
+#include <linux/fb.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+
+#include <video/atmel_lcdc.h>
#include <asm/hardware.h>
#include <asm/setup.h>
@@ -271,6 +276,127 @@ static struct spi_board_info ek_spi_devices[] = {
};
+/*
+ * LCD Controller
+ */
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static struct fb_videomode at91_tft_vga_modes[] = {
+ {
+ .name = "TX09D50VM1CCA @ 60",
+ .refresh = 60,
+ .xres = 240, .yres = 320,
+ .pixclock = KHZ2PICOS(4965),
+
+ .left_margin = 1, .right_margin = 33,
+ .upper_margin = 1, .lower_margin = 0,
+ .hsync_len = 5, .vsync_len = 1,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+};
+
+static struct fb_monspecs at91fb_default_monspecs = {
+ .manufacturer = "HIT",
+ .monitor = "TX09D50VM1CCA",
+
+ .modedb = at91_tft_vga_modes,
+ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
+ .hfmin = 15000,
+ .hfmax = 64000,
+ .vfmin = 50,
+ .vfmax = 150,
+};
+
+#define AT91SAM9261_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
+ | ATMEL_LCDC_DISTYPE_TFT \
+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
+
+static void at91_lcdc_power_control(int on)
+{
+ if (on)
+ at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */
+ else
+ at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */
+}
+
+/* Driver datas */
+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+ .default_bpp = 16,
+ .default_dmacon = ATMEL_LCDC_DMAEN,
+ .default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2,
+ .default_monspecs = &at91fb_default_monspecs,
+ .atmel_lcdfb_power_control = at91_lcdc_power_control,
+ .guard_time = 1,
+};
+
+#else
+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+#endif
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+ {
+ .gpio = AT91_PIN_PA27,
+ .keycode = BTN_0,
+ .desc = "Button 0",
+ .active_low = 1,
+ },
+ {
+ .gpio = AT91_PIN_PA26,
+ .keycode = BTN_1,
+ .desc = "Button 1",
+ .active_low = 1,
+ },
+ {
+ .gpio = AT91_PIN_PA25,
+ .keycode = BTN_2,
+ .desc = "Button 2",
+ .active_low = 1,
+ },
+ {
+ .gpio = AT91_PIN_PA24,
+ .keycode = BTN_3,
+ .desc = "Button 3",
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+ .buttons = ek_buttons,
+ .nbuttons = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_button_data,
+ }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+ at91_set_gpio_input(AT91_PIN_PB27, 0); /* btn0 */
+ at91_set_deglitch(AT91_PIN_PB27, 1);
+ at91_set_gpio_input(AT91_PIN_PB26, 0); /* btn1 */
+ at91_set_deglitch(AT91_PIN_PB26, 1);
+ at91_set_gpio_input(AT91_PIN_PB25, 0); /* btn2 */
+ at91_set_deglitch(AT91_PIN_PB25, 1);
+ at91_set_gpio_input(AT91_PIN_PB24, 0); /* btn3 */
+ at91_set_deglitch(AT91_PIN_PB24, 1);
+
+ platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
static void __init ek_board_init(void)
{
/* Serial */
@@ -296,6 +422,10 @@ static void __init ek_board_init(void)
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
#endif
+ /* LCD Controller */
+ at91_add_device_lcdc(&ek_lcdc_data);
+ /* Push Buttons */
+ ek_add_device_buttons();
}
MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index c164c8e58ae..2a1cc73390b 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -26,6 +26,9 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/fb.h>
+
+#include <video/atmel_lcdc.h>
#include <asm/hardware.h>
#include <asm/setup.h>
@@ -202,6 +205,65 @@ static struct at91_nand_data __initdata ek_nand_data = {
/*
+ * LCD Controller
+ */
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static struct fb_videomode at91_tft_vga_modes[] = {
+ {
+ .name = "TX09D50VM1CCA @ 60",
+ .refresh = 60,
+ .xres = 240, .yres = 320,
+ .pixclock = KHZ2PICOS(4965),
+
+ .left_margin = 1, .right_margin = 33,
+ .upper_margin = 1, .lower_margin = 0,
+ .hsync_len = 5, .vsync_len = 1,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+};
+
+static struct fb_monspecs at91fb_default_monspecs = {
+ .manufacturer = "HIT",
+ .monitor = "TX09D70VM1CCA",
+
+ .modedb = at91_tft_vga_modes,
+ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
+ .hfmin = 15000,
+ .hfmax = 64000,
+ .vfmin = 50,
+ .vfmax = 150,
+};
+
+#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
+ | ATMEL_LCDC_DISTYPE_TFT \
+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
+
+static void at91_lcdc_power_control(int on)
+{
+ if (on)
+ at91_set_gpio_value(AT91_PIN_PD12, 0); /* power up */
+ else
+ at91_set_gpio_value(AT91_PIN_PD12, 1); /* power down */
+}
+
+/* Driver datas */
+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+ .default_bpp = 16,
+ .default_dmacon = ATMEL_LCDC_DMAEN,
+ .default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2,
+ .default_monspecs = &at91fb_default_monspecs,
+ .atmel_lcdfb_power_control = at91_lcdc_power_control,
+ .guard_time = 1,
+};
+
+#else
+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+#endif
+
+
+/*
* AC97
*/
static struct atmel_ac97_data ek_ac97_data = {
@@ -230,6 +292,8 @@ static void __init ek_board_init(void)
at91_add_device_nand(&ek_nand_data);
/* I2C */
at91_add_device_i2c();
+ /* LCD Controller */
+ at91_add_device_lcdc(&ek_lcdc_data);
/* AC97 */
at91_add_device_ac97(&ek_ac97_data);
}
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index a8f88cd2990..99ac2e55774 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -4,7 +4,8 @@
#
# Common objects
-obj-y := time.o irq.o serial.o io.o id.o psc.o
+obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \
+ gpio.o mux.o
# Board specific
obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o
diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c
index 633c12e4304..9e4024c4965 100644
--- a/arch/arm/mach-davinci/board-evm.c
+++ b/arch/arm/mach-davinci/board-evm.c
@@ -32,6 +32,7 @@
void __init davinci_psc_init(void);
void __init davinci_irq_init(void);
void __init davinci_map_common_io(void);
+void __init davinci_init_common_hw(void);
/* NOR Flash base address set to CS0 by default */
#define NOR_FLASH_PHYS 0x02000000
@@ -116,6 +117,7 @@ static __init void davinci_evm_init(void)
static __init void davinci_evm_irq_init(void)
{
+ davinci_init_common_hw();
davinci_irq_init();
}
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
new file mode 100644
index 00000000000..139ceaa35e2
--- /dev/null
+++ b/arch/arm/mach-davinci/clock.c
@@ -0,0 +1,323 @@
+/*
+ * TI DaVinci clock config file
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/arch/psc.h>
+#include "clock.h"
+
+/* PLL/Reset register offsets */
+#define PLLM 0x110
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+static DEFINE_SPINLOCK(clockfw_lock);
+
+static unsigned int commonrate;
+static unsigned int armrate;
+static unsigned int fixedrate = 27000000; /* 27 MHZ */
+
+extern void davinci_psc_config(unsigned int domain, unsigned int id, char enable);
+
+/*
+ * Returns a clock. Note that we first try to use device id on the bus
+ * and clock name. If this fails, we try to use clock name only.
+ */
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ struct clk *p, *clk = ERR_PTR(-ENOENT);
+ int idno;
+
+ if (dev == NULL || dev->bus != &platform_bus_type)
+ idno = -1;
+ else
+ idno = to_platform_device(dev)->id;
+
+ mutex_lock(&clocks_mutex);
+
+ list_for_each_entry(p, &clocks, node) {
+ if (p->id == idno &&
+ strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+ clk = p;
+ goto found;
+ }
+ }
+
+ list_for_each_entry(p, &clocks, node) {
+ if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+ clk = p;
+ break;
+ }
+ }
+
+found:
+ mutex_unlock(&clocks_mutex);
+
+ return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+ if (clk && !IS_ERR(clk))
+ module_put(clk->owner);
+}
+EXPORT_SYMBOL(clk_put);
+
+static int __clk_enable(struct clk *clk)
+{
+ if (clk->flags & ALWAYS_ENABLED)
+ return 0;
+
+ davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 1);
+ return 0;
+}
+
+static void __clk_disable(struct clk *clk)
+{
+ if (clk->usecount)
+ return;
+
+ davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 0);
+}
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+ int ret = 0;
+
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ if (clk->usecount++ == 0) {
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = __clk_enable(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ if (clk == NULL || IS_ERR(clk))
+ return;
+
+ if (clk->usecount > 0 && !(--clk->usecount)) {
+ spin_lock_irqsave(&clockfw_lock, flags);
+ __clk_disable(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+ }
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ return *(clk->rate);
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ return *(clk->rate);
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ /* changing the clk rate is not supported */
+ return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_register(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ mutex_lock(&clocks_mutex);
+ list_add(&clk->node, &clocks);
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return;
+
+ mutex_lock(&clocks_mutex);
+ list_del(&clk->node);
+ mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+static struct clk davinci_clks[] = {
+ {
+ .name = "ARMCLK",
+ .rate = &armrate,
+ .lpsc = -1,
+ .flags = ALWAYS_ENABLED,
+ },
+ {
+ .name = "UART",
+ .rate = &fixedrate,
+ .lpsc = DAVINCI_LPSC_UART0,
+ },
+ {
+ .name = "EMACCLK",
+ .rate = &commonrate,
+ .lpsc = DAVINCI_LPSC_EMAC_WRAPPER,
+ },
+ {
+ .name = "I2CCLK",
+ .rate = &fixedrate,
+ .lpsc = DAVINCI_LPSC_I2C,
+ },
+ {
+ .name = "IDECLK",
+ .rate = &commonrate,
+ .lpsc = DAVINCI_LPSC_ATA,
+ },
+ {
+ .name = "McBSPCLK",
+ .rate = &commonrate,
+ .lpsc = DAVINCI_LPSC_McBSP,
+ },
+ {
+ .name = "MMCSDCLK",
+ .rate = &commonrate,
+ .lpsc = DAVINCI_LPSC_MMC_SD,
+ },
+ {
+ .name = "SPICLK",
+ .rate = &commonrate,
+ .lpsc = DAVINCI_LPSC_SPI,
+ },
+ {
+ .name = "gpio",
+ .rate = &commonrate,
+ .lpsc = DAVINCI_LPSC_GPIO,
+ },
+ {
+ .name = "AEMIFCLK",
+ .rate = &commonrate,
+ .lpsc = DAVINCI_LPSC_AEMIF,
+ .usecount = 1,
+ }
+};
+
+int __init davinci_clk_init(void)
+{
+ struct clk *clkp;
+ int count = 0;
+ u32 pll_mult;
+
+ pll_mult = davinci_readl(DAVINCI_PLL_CNTRL0_BASE + PLLM);
+ commonrate = ((pll_mult + 1) * 27000000) / 6;
+ armrate = ((pll_mult + 1) * 27000000) / 2;
+
+ for (clkp = davinci_clks; count < ARRAY_SIZE(davinci_clks);
+ count++, clkp++) {
+ clk_register(clkp);
+
+ /* Turn on clocks that have been enabled in the
+ * table above */
+ if (clkp->usecount)
+ clk_enable(clkp);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PROC_FS
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+
+static void *davinci_ck_start(struct seq_file *m, loff_t *pos)
+{
+ return *pos < 1 ? (void *)1 : NULL;
+}
+
+static void *davinci_ck_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return NULL;
+}
+
+static void davinci_ck_stop(struct seq_file *m, void *v)
+{
+}
+
+static int davinci_ck_show(struct seq_file *m, void *v)
+{
+ struct clk *cp;
+
+ list_for_each_entry(cp, &clocks, node)
+ seq_printf(m,"%s %d %d\n", cp->name, *(cp->rate), cp->usecount);
+
+ return 0;
+}
+
+static struct seq_operations davinci_ck_op = {
+ .start = davinci_ck_start,
+ .next = davinci_ck_next,
+ .stop = davinci_ck_stop,
+ .show = davinci_ck_show
+};
+
+static int davinci_ck_open(struct inode *inode, struct file *file)
+{
+ return seq_open(file, &davinci_ck_op);
+}
+
+static struct file_operations proc_davinci_ck_operations = {
+ .open = davinci_ck_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+static int __init davinci_ck_proc_init(void)
+{
+ struct proc_dir_entry *entry;
+
+ entry = create_proc_entry("davinci_clocks", 0, NULL);
+ if (entry)
+ entry->proc_fops = &proc_davinci_ck_operations;
+ return 0;
+
+}
+__initcall(davinci_ck_proc_init);
+#endif /* CONFIG_DEBUG_PROC_FS */
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
new file mode 100644
index 00000000000..ed47079a52e
--- /dev/null
+++ b/arch/arm/mach-davinci/clock.h
@@ -0,0 +1,33 @@
+/*
+ * TI DaVinci clock definitions
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_DAVINCI_CLOCK_H
+#define __ARCH_ARM_DAVINCI_CLOCK_H
+
+struct clk {
+ struct list_head node;
+ struct module *owner;
+ const char *name;
+ unsigned int *rate;
+ int id;
+ __s8 usecount;
+ __u8 flags;
+ __u8 lpsc;
+};
+
+/* Clock flags */
+#define RATE_CKCTL 1
+#define RATE_FIXED 2
+#define RATE_PROPAGATES 4
+#define VIRTUAL_CLOCK 8
+#define ALWAYS_ENABLED 16
+#define ENABLE_REG_32BIT 32
+
+#endif
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
new file mode 100644
index 00000000000..9c67886e718
--- /dev/null
+++ b/arch/arm/mach-davinci/gpio.c
@@ -0,0 +1,286 @@
+/*
+ * TI DaVinci GPIO Support
+ *
+ * Copyright (c) 2006 David Brownell
+ * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/bitops.h>
+
+#include <asm/arch/irqs.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/gpio.h>
+
+#include <asm/mach/irq.h>
+
+static DEFINE_SPINLOCK(gpio_lock);
+static DECLARE_BITMAP(gpio_in_use, DAVINCI_N_GPIO);
+
+int gpio_request(unsigned gpio, const char *tag)
+{
+ if (gpio >= DAVINCI_N_GPIO)
+ return -EINVAL;
+
+ if (test_and_set_bit(gpio, gpio_in_use))
+ return -EBUSY;
+
+ return 0;
+}
+EXPORT_SYMBOL(gpio_request);
+
+void gpio_free(unsigned gpio)
+{
+ if (gpio >= DAVINCI_N_GPIO)
+ return;
+
+ clear_bit(gpio, gpio_in_use);
+}
+EXPORT_SYMBOL(gpio_free);
+
+/* create a non-inlined version */
+static struct gpio_controller *__iomem gpio2controller(unsigned gpio)
+{
+ return __gpio_to_controller(gpio);
+}
+
+/*
+ * Assuming the pin is muxed as a gpio output, set its output value.
+ */
+void __gpio_set(unsigned gpio, int value)
+{
+ struct gpio_controller *__iomem g = gpio2controller(gpio);
+
+ __raw_writel(__gpio_mask(gpio), value ? &g->set_data : &g->clr_data);
+}
+EXPORT_SYMBOL(__gpio_set);
+
+
+/*
+ * Read the pin's value (works even if it's set up as output);
+ * returns zero/nonzero.
+ *
+ * Note that changes are synched to the GPIO clock, so reading values back
+ * right after you've set them may give old values.
+ */
+int __gpio_get(unsigned gpio)
+{
+ struct gpio_controller *__iomem g = gpio2controller(gpio);
+
+ return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data));
+}
+EXPORT_SYMBOL(__gpio_get);
+
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * board setup code *MUST* set PINMUX0 and PINMUX1 as
+ * needed, and enable the GPIO clock.
+ */
+
+int gpio_direction_input(unsigned gpio)
+{
+ struct gpio_controller *__iomem g = gpio2controller(gpio);
+ u32 temp;
+ u32 mask;
+
+ if (!g)
+ return -EINVAL;
+
+ spin_lock(&gpio_lock);
+ mask = __gpio_mask(gpio);
+ temp = __raw_readl(&g->dir);
+ temp |= mask;
+ __raw_writel(temp, &g->dir);
+ spin_unlock(&gpio_lock);
+ return 0;
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+ struct gpio_controller *__iomem g = gpio2controller(gpio);
+ u32 temp;
+ u32 mask;
+
+ if (!g)
+ return -EINVAL;
+
+ spin_lock(&gpio_lock);
+ mask = __gpio_mask(gpio);
+ temp = __raw_readl(&g->dir);
+ temp &= ~mask;
+ __raw_writel(mask, value ? &g->set_data : &g->clr_data);
+ __raw_writel(temp, &g->dir);
+ spin_unlock(&gpio_lock);
+ return 0;
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
+/*
+ * We expect irqs will normally be set up as input pins, but they can also be
+ * used as output pins ... which is convenient for testing.
+ *
+ * NOTE: GPIO0..GPIO7 also have direct INTC hookups, which work in addition
+ * to their GPIOBNK0 irq (but with a bit less overhead). But we don't have
+ * a good way to hook those up ...
+ *
+ * All those INTC hookups (GPIO0..GPIO7 plus five IRQ banks) can also
+ * serve as EDMA event triggers.
+ */
+
+static void gpio_irq_disable(unsigned irq)
+{
+ struct gpio_controller *__iomem g = get_irq_chip_data(irq);
+ u32 mask = __gpio_mask(irq_to_gpio(irq));
+
+ __raw_writel(mask, &g->clr_falling);
+ __raw_writel(mask, &g->clr_rising);
+}
+
+static void gpio_irq_enable(unsigned irq)
+{
+ struct gpio_controller *__iomem g = get_irq_chip_data(irq);
+ u32 mask = __gpio_mask(irq_to_gpio(irq));
+
+ if (irq_desc[irq].status & IRQ_TYPE_EDGE_FALLING)
+ __raw_writel(mask, &g->set_falling);
+ if (irq_desc[irq].status & IRQ_TYPE_EDGE_RISING)
+ __raw_writel(mask, &g->set_rising);
+}
+
+static int gpio_irq_type(unsigned irq, unsigned trigger)
+{
+ struct gpio_controller *__iomem g = get_irq_chip_data(irq);
+ u32 mask = __gpio_mask(irq_to_gpio(irq));
+
+ if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+ return -EINVAL;
+
+ irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK;
+ irq_desc[irq].status |= trigger;
+
+ __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
+ ? &g->set_falling : &g->clr_falling);
+ __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
+ ? &g->set_rising : &g->clr_rising);
+ return 0;
+}
+
+static struct irq_chip gpio_irqchip = {
+ .name = "GPIO",
+ .enable = gpio_irq_enable,
+ .disable = gpio_irq_disable,
+ .set_type = gpio_irq_type,
+};
+
+static void
+gpio_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+ struct gpio_controller *__iomem g = get_irq_chip_data(irq);
+ u32 mask = 0xffff;
+
+ /* we only care about one bank */
+ if (irq & 1)
+ mask <<= 16;
+
+ /* temporarily mask (level sensitive) parent IRQ */
+ desc->chip->ack(irq);
+ while (1) {
+ u32 status;
+ struct irq_desc *gpio;
+ int n;
+ int res;
+
+ /* ack any irqs */
+ status = __raw_readl(&g->intstat) & mask;
+ if (!status)
+ break;
+ __raw_writel(status, &g->intstat);
+ if (irq & 1)
+ status >>= 16;
+
+ /* now demux them to the right lowlevel handler */
+ n = (int)get_irq_data(irq);
+ gpio = &irq_desc[n];
+ while (status) {
+ res = ffs(status);
+ n += res;
+ gpio += res;
+ desc_handle_irq(n - 1, gpio - 1);
+ status >>= res;
+ }
+ }
+ desc->chip->unmask(irq);
+ /* now it may re-trigger */
+}
+
+/*
+ * NOTE: for suspend/resume, probably best to make a sysdev (and class)
+ * with its suspend/resume calls hooking into the results of the set_wake()
+ * calls ... so if no gpios are wakeup events the clock can be disabled,
+ * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
+ * can be set appropriately for GPIOV33 pins.
+ */
+
+static int __init davinci_gpio_irq_setup(void)
+{
+ unsigned gpio, irq, bank;
+ struct clk *clk;
+
+ clk = clk_get(NULL, "gpio");
+ if (IS_ERR(clk)) {
+ printk(KERN_ERR "Error %ld getting gpio clock?\n",
+ PTR_ERR(clk));
+ return 0;
+ }
+
+ clk_enable(clk);
+
+ for (gpio = 0, irq = gpio_to_irq(0), bank = IRQ_GPIOBNK0;
+ gpio < DAVINCI_N_GPIO; bank++) {
+ struct gpio_controller *__iomem g = gpio2controller(gpio);
+ unsigned i;
+
+ __raw_writel(~0, &g->clr_falling);
+ __raw_writel(~0, &g->clr_rising);
+
+ /* set up all irqs in this bank */
+ set_irq_chained_handler(bank, gpio_irq_handler);
+ set_irq_chip_data(bank, g);
+ set_irq_data(bank, (void *)irq);
+
+ for (i = 0; i < 16 && gpio < DAVINCI_N_GPIO;
+ i++, irq++, gpio++) {
+ set_irq_chip(irq, &gpio_irqchip);
+ set_irq_chip_data(irq, g);
+ set_irq_handler(irq, handle_simple_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+ }
+
+ /* BINTEN -- per-bank interrupt enable. genirq would also let these
+ * bits be set/cleared dynamically.
+ */
+ __raw_writel(0x1f, (void *__iomem)
+ IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08));
+
+ printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
+
+ return 0;
+}
+
+arch_initcall(davinci_gpio_irq_setup);
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
index 87fae6fb6ec..47787ff84a6 100644
--- a/arch/arm/mach-davinci/io.c
+++ b/arch/arm/mach-davinci/io.c
@@ -17,6 +17,7 @@
#include <asm/memory.h>
#include <asm/mach/map.h>
+#include <asm/arch/clock.h>
extern void davinci_check_revision(void);
@@ -49,3 +50,8 @@ void __init davinci_map_common_io(void)
*/
davinci_check_revision();
}
+
+void __init davinci_init_common_hw(void)
+{
+ davinci_clk_init();
+}
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
new file mode 100644
index 00000000000..92d26bd305b
--- /dev/null
+++ b/arch/arm/mach-davinci/mux.c
@@ -0,0 +1,41 @@
+/*
+ * DaVinci pin multiplexing configurations
+ *
+ * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <asm/hardware.h>
+
+#include <asm/arch/mux.h>
+
+/* System control register offsets */
+#define PINMUX0 0x00
+#define PINMUX1 0x04
+
+static DEFINE_SPINLOCK(mux_lock);
+
+void davinci_mux_peripheral(unsigned int mux, unsigned int enable)
+{
+ u32 pinmux, muxreg = PINMUX0;
+
+ if (mux >= DAVINCI_MUX_LEVEL2) {
+ muxreg = PINMUX1;
+ mux -= DAVINCI_MUX_LEVEL2;
+ }
+
+ spin_lock(&mux_lock);
+ pinmux = davinci_readl(DAVINCI_SYSTEM_MODULE_BASE + muxreg);
+ if (enable)
+ pinmux |= (1 << mux);
+ else
+ pinmux &= ~(1 << mux);
+ davinci_writel(pinmux, DAVINCI_SYSTEM_MODULE_BASE + muxreg);
+ spin_unlock(&mux_lock);
+}
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index e1b0050283a..1334416559a 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -25,39 +25,40 @@
#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/arch/psc.h>
+#include <asm/arch/mux.h>
-#define PTCMD __REG(0x01C41120)
-#define PDSTAT __REG(0x01C41200)
-#define PDCTL1 __REG(0x01C41304)
-#define EPCPR __REG(0x01C41070)
-#define PTSTAT __REG(0x01C41128)
+/* PSC register offsets */
+#define EPCPR 0x070
+#define PTCMD 0x120
+#define PTSTAT 0x128
+#define PDSTAT 0x200
+#define PDCTL1 0x304
+#define MDSTAT 0x800
+#define MDCTL 0xA00
-#define MDSTAT IO_ADDRESS(0x01C41800)
-#define MDCTL IO_ADDRESS(0x01C41A00)
-
-#define PINMUX0 __REG(0x01c40000)
-#define PINMUX1 __REG(0x01c40004)
-#define VDD3P3V_PWDN __REG(0x01C40048)
+/* System control register offsets */
+#define VDD3P3V_PWDN 0x48
static void davinci_psc_mux(unsigned int id)
{
switch (id) {
case DAVINCI_LPSC_ATA:
- PINMUX0 |= (1 << 17) | (1 << 16);
+ davinci_mux_peripheral(DAVINCI_MUX_HDIREN, 1);
+ davinci_mux_peripheral(DAVINCI_MUX_ATAEN, 1);
break;
case DAVINCI_LPSC_MMC_SD:
/* VDD power manupulations are done in U-Boot for CPMAC
* so applies to MMC as well
*/
/*Set up the pull regiter for MMC */
- VDD3P3V_PWDN = 0x0;
- PINMUX1 &= (~(1 << 9));
+ davinci_writel(0, DAVINCI_SYSTEM_MODULE_BASE + VDD3P3V_PWDN);
+ davinci_mux_peripheral(DAVINCI_MUX_MSTK, 0);
break;
case DAVINCI_LPSC_I2C:
- PINMUX1 |= (1 << 7);
+ davinci_mux_peripheral(DAVINCI_MUX_I2C, 1);
break;
case DAVINCI_LPSC_McBSP:
- PINMUX1 |= (1 << 10);
+ davinci_mux_peripheral(DAVINCI_MUX_ASP, 1);
break;
default:
break;
@@ -67,33 +68,59 @@ static void davinci_psc_mux(unsigned int id)
/* Enable or disable a PSC domain */
void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
{
- volatile unsigned int *mdstat = (unsigned int *)((int)MDSTAT + 4 * id);
- volatile unsigned int *mdctl = (unsigned int *)((int)MDCTL + 4 * id);
+ u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask;
if (id < 0)
return;
+ mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
if (enable)
- *mdctl |= 0x00000003; /* Enable Module */
+ mdctl |= 0x00000003; /* Enable Module */
else
- *mdctl &= 0xFFFFFFF2; /* Disable Module */
+ mdctl &= 0xFFFFFFF2; /* Disable Module */
+ davinci_writel(mdctl, DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
+
+ pdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDSTAT);
+ if ((pdstat & 0x00000001) == 0) {
+ pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+ pdctl1 |= 0x1;
+ davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+
+ ptcmd = 1 << domain;
+ davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD);
- if ((PDSTAT & 0x00000001) == 0) {
- PDCTL1 |= 0x1;
- PTCMD = (1 << domain);
- while ((((EPCPR >> domain) & 1) == 0));
+ do {
+ epcpr = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
+ EPCPR);
+ } while ((((epcpr >> domain) & 1) == 0));
- PDCTL1 |= 0x100;
- while (!(((PTSTAT >> domain) & 1) == 0));
+ pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+ pdctl1 |= 0x100;
+ davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+
+ do {
+ ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
+ PTSTAT);
+ } while (!(((ptstat >> domain) & 1) == 0));
} else {
- PTCMD = (1 << domain);
- while (!(((PTSTAT >> domain) & 1) == 0));
+ ptcmd = 1 << domain;
+ davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD);
+
+ do {
+ ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
+ PTSTAT);
+ } while (!(((ptstat >> domain) & 1) == 0));
}
if (enable)
- while (!((*mdstat & 0x0000001F) == 0x3));
+ mdstat_mask = 0x3;
else
- while (!((*mdstat & 0x0000001F) == 0x2));
+ mdstat_mask = 0x2;
+
+ do {
+ mdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
+ MDSTAT + 4 * id);
+ } while (!((mdstat & 0x0000001F) == mdstat_mask));
if (enable)
davinci_psc_mux(id);
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index 1c474cf709c..a58b678006d 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -28,12 +28,16 @@
#include <linux/module.h>
#include <linux/string.h>
+#include <asm/errno.h>
#include <asm/arch/imxfb.h>
#include <asm/hardware.h>
#include <asm/arch/imx-regs.h>
#include <asm/mach/map.h>
#include <asm/arch/mmc.h>
+#include <asm/arch/gpio.h>
+
+unsigned long imx_gpio_alloc_map[(GPIO_PORT_MAX + 1) * 32 / BITS_PER_LONG];
void imx_gpio_mode(int gpio_mode)
{
@@ -95,6 +99,120 @@ void imx_gpio_mode(int gpio_mode)
EXPORT_SYMBOL(imx_gpio_mode);
+int imx_gpio_request(unsigned gpio, const char *label)
+{
+ if(gpio >= (GPIO_PORT_MAX + 1) * 32)
+ printk(KERN_ERR "imx_gpio: Attempt to request nonexistent GPIO %d for \"%s\"\n",
+ gpio, label ? label : "?");
+ return -EINVAL;
+
+ if(test_and_set_bit(gpio, imx_gpio_alloc_map)) {
+ printk(KERN_ERR "imx_gpio: GPIO %d already used. Allocation for \"%s\" failed\n",
+ gpio, label ? label : "?");
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+EXPORT_SYMBOL(imx_gpio_request);
+
+void imx_gpio_free(unsigned gpio)
+{
+ if(gpio >= (GPIO_PORT_MAX + 1) * 32)
+ return;
+
+ clear_bit(gpio, imx_gpio_alloc_map);
+}
+
+EXPORT_SYMBOL(imx_gpio_free);
+
+int imx_gpio_direction_input(unsigned gpio)
+{
+ imx_gpio_mode(gpio| GPIO_IN);
+ return 0;
+}
+
+EXPORT_SYMBOL(imx_gpio_direction_input);
+
+int imx_gpio_direction_output(unsigned gpio, int value)
+{
+ imx_gpio_set_value(gpio, value);
+ imx_gpio_mode(gpio| GPIO_OUT);
+ return 0;
+}
+
+EXPORT_SYMBOL(imx_gpio_direction_output);
+
+int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+ int alloc_mode, const char *label)
+{
+ const int *p = pin_list;
+ int i;
+ unsigned gpio;
+ unsigned mode;
+
+ for (i = 0; i < count; i++) {
+ gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
+ mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK);
+
+ if (gpio >= (GPIO_PORT_MAX + 1) * 32)
+ goto setup_error;
+
+ if (alloc_mode & IMX_GPIO_ALLOC_MODE_RELEASE)
+ imx_gpio_free(gpio);
+ else if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_NO_ALLOC))
+ if (imx_gpio_request(gpio, label))
+ if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_TRY_ALLOC))
+ goto setup_error;
+
+ if (!(alloc_mode & (IMX_GPIO_ALLOC_MODE_ALLOC_ONLY |
+ IMX_GPIO_ALLOC_MODE_RELEASE)))
+ imx_gpio_mode(gpio | mode);
+
+ p++;
+ }
+ return 0;
+
+setup_error:
+ if(alloc_mode & (IMX_GPIO_ALLOC_MODE_NO_ALLOC |
+ IMX_GPIO_ALLOC_MODE_TRY_ALLOC))
+ return -EINVAL;
+
+ while (p != pin_list) {
+ p--;
+ gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
+ imx_gpio_free(gpio);
+ }
+
+ return -EINVAL;
+}
+
+EXPORT_SYMBOL(imx_gpio_setup_multiple_pins);
+
+void __imx_gpio_set_value(unsigned gpio, int value)
+{
+ imx_gpio_set_value_inline(gpio, value);
+}
+
+EXPORT_SYMBOL(__imx_gpio_set_value);
+
+int imx_gpio_to_irq(unsigned gpio)
+{
+ return IRQ_GPIOA(0) + gpio;
+}
+
+EXPORT_SYMBOL(imx_gpio_to_irq);
+
+int imx_irq_to_gpio(unsigned irq)
+{
+ if (irq < IRQ_GPIOA(0))
+ return -EINVAL;
+ return irq - IRQ_GPIOA(0);
+}
+
+EXPORT_SYMBOL(imx_irq_to_gpio);
+
/*
* get the system pll clock in Hz
*
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index 6960a9d0421..010f6fa984a 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2000-2001 Deep Blue Solutions
* Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -15,6 +16,7 @@
#include <linux/irq.h>
#include <linux/time.h>
#include <linux/clocksource.h>
+#include <linux/clockchips.h>
#include <asm/hardware.h>
#include <asm/io.h>
@@ -25,7 +27,8 @@
/* Use timer 1 as system timer */
#define TIMER_BASE IMX_TIM1_BASE
-static unsigned long evt_diff;
+static struct clock_event_device clockevent_imx;
+static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
/*
* IRQ handler for the timer
@@ -33,25 +36,20 @@ static unsigned long evt_diff;
static irqreturn_t
imx_timer_interrupt(int irq, void *dev_id)
{
+ struct clock_event_device *evt = &clockevent_imx;
uint32_t tstat;
+ irqreturn_t ret = IRQ_NONE;
/* clear the interrupt */
tstat = IMX_TSTAT(TIMER_BASE);
IMX_TSTAT(TIMER_BASE) = 0;
if (tstat & TSTAT_COMP) {
- do {
-
- write_seqlock(&xtime_lock);
- timer_tick();
- write_sequnlock(&xtime_lock);
- IMX_TCMP(TIMER_BASE) += evt_diff;
-
- } while (unlikely((int32_t)(IMX_TCMP(TIMER_BASE)
- - IMX_TCN(TIMER_BASE)) < 0));
+ evt->event_handler(evt);
+ ret = IRQ_HANDLED;
}
- return IRQ_HANDLED;
+ return ret;
}
static struct irqaction imx_timer_irq = {
@@ -70,10 +68,8 @@ static void __init imx_timer_hardware_init(void)
*/
IMX_TCTL(TIMER_BASE) = 0;
IMX_TPRER(TIMER_BASE) = 0;
- IMX_TCMP(TIMER_BASE) = LATCH - 1;
- IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_IRQEN | TCTL_TEN;
- evt_diff = LATCH;
+ IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN;
}
cycle_t imx_get_cycles(void)
@@ -99,11 +95,108 @@ static int __init imx_clocksource_init(void)
return 0;
}
+static int imx_set_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ unsigned long tcmp;
+
+ tcmp = IMX_TCN(TIMER_BASE) + evt;
+ IMX_TCMP(TIMER_BASE) = tcmp;
+
+ return (int32_t)(tcmp - IMX_TCN(TIMER_BASE)) < 0 ? -ETIME : 0;
+}
+
+#ifdef DEBUG
+static const char *clock_event_mode_label[]={
+ [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
+ [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT",
+ [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
+ [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED"
+};
+#endif /*DEBUG*/
+
+static void imx_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
+{
+ unsigned long flags;
+
+ /*
+ * The timer interrupt generation is disabled at least
+ * for enough time to call imx_set_next_event()
+ */
+ local_irq_save(flags);
+ /* Disable interrupt in GPT module */
+ IMX_TCTL(TIMER_BASE) &= ~TCTL_IRQEN;
+ if (mode != clockevent_mode) {
+ /* Set event time into far-far future */
+ IMX_TCMP(TIMER_BASE) = IMX_TCN(TIMER_BASE) - 3;
+ /* Clear pending interrupt */
+ IMX_TSTAT(TIMER_BASE) &= ~TSTAT_COMP;
+ }
+
+#ifdef DEBUG
+ printk(KERN_INFO "imx_set_mode: changing mode from %s to %s\n",
+ clock_event_mode_label[clockevent_mode], clock_event_mode_label[mode]);
+#endif /*DEBUG*/
+
+ /* Remember timer mode */
+ clockevent_mode = mode;
+ local_irq_restore(flags);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ printk(KERN_ERR "imx_set_mode: Periodic mode is not supported for i.MX\n");
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /*
+ * Do not put overhead of interrupt enable/disable into
+ * imx_set_next_event(), the core has about 4 minutes
+ * to call imx_set_next_event() or shutdown clock after
+ * mode switching
+ */
+ local_irq_save(flags);
+ IMX_TCTL(TIMER_BASE) |= TCTL_IRQEN;
+ local_irq_restore(flags);
+ break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ /* Left event sources disabled, no more interrupts appears */
+ break;
+ }
+}
+
+static struct clock_event_device clockevent_imx = {
+ .name = "imx_timer1",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .set_mode = imx_set_mode,
+ .set_next_event = imx_set_next_event,
+ .rating = 200,
+};
+
+static int __init imx_clockevent_init(void)
+{
+ clockevent_imx.mult = div_sc(imx_get_perclk1(), NSEC_PER_SEC,
+ clockevent_imx.shift);
+ clockevent_imx.max_delta_ns =
+ clockevent_delta2ns(0xfffffffe, &clockevent_imx);
+ clockevent_imx.min_delta_ns =
+ clockevent_delta2ns(0xf, &clockevent_imx);
+
+ clockevent_imx.cpumask = cpumask_of_cpu(0);
+
+ clockevents_register_device(&clockevent_imx);
+
+ return 0;
+}
+
+
static void __init imx_timer_init(void)
{
imx_timer_hardware_init();
imx_clocksource_init();
+ imx_clockevent_init();
+
/*
* Make irqs happen for the system timer
*/
diff --git a/arch/arm/mach-iop13xx/tpmi.c b/arch/arm/mach-iop13xx/tpmi.c
index d3dc278213d..2476347ea62 100644
--- a/arch/arm/mach-iop13xx/tpmi.c
+++ b/arch/arm/mach-iop13xx/tpmi.c
@@ -29,13 +29,15 @@
#define IOP13XX_TPMI_MMR(dev) IOP13XX_REG_ADDR32_PHYS(0x48000 + (dev << 12))
#define IOP13XX_TPMI_MEM(dev) IOP13XX_REG_ADDR32_PHYS(0x60000 + (dev << 13))
#define IOP13XX_TPMI_CTRL(dev) IOP13XX_REG_ADDR32_PHYS(0x50000 + (dev << 10))
+#define IOP13XX_TPMI_IOP_CTRL(dev) (IOP13XX_TPMI_CTRL(dev) + 0x2000)
#define IOP13XX_TPMI_MMR_SIZE (SZ_4K - 1)
#define IOP13XX_TPMI_MEM_SIZE (255)
#define IOP13XX_TPMI_MEM_CTRL (SZ_1K - 1)
#define IOP13XX_TPMI_RESOURCE_MMR 0
#define IOP13XX_TPMI_RESOURCE_MEM 1
#define IOP13XX_TPMI_RESOURCE_CTRL 2
-#define IOP13XX_TPMI_RESOURCE_IRQ 3
+#define IOP13XX_TPMI_RESOURCE_IOP_CTRL 3
+#define IOP13XX_TPMI_RESOURCE_IRQ 4
static struct resource iop13xx_tpmi_0_resources[] = {
[IOP13XX_TPMI_RESOURCE_MMR] = {
@@ -53,6 +55,11 @@ static struct resource iop13xx_tpmi_0_resources[] = {
.end = IOP13XX_TPMI_CTRL(0) + IOP13XX_TPMI_MEM_CTRL,
.flags = IORESOURCE_MEM,
},
+ [IOP13XX_TPMI_RESOURCE_IOP_CTRL] = {
+ .start = IOP13XX_TPMI_IOP_CTRL(0),
+ .end = IOP13XX_TPMI_IOP_CTRL(0) + IOP13XX_TPMI_MEM_CTRL,
+ .flags = IORESOURCE_MEM,
+ },
[IOP13XX_TPMI_RESOURCE_IRQ] = {
.start = IRQ_IOP13XX_TPMI0_OUT,
.end = IRQ_IOP13XX_TPMI0_OUT,
@@ -76,6 +83,11 @@ static struct resource iop13xx_tpmi_1_resources[] = {
.end = IOP13XX_TPMI_CTRL(1) + IOP13XX_TPMI_MEM_CTRL,
.flags = IORESOURCE_MEM,
},
+ [IOP13XX_TPMI_RESOURCE_IOP_CTRL] = {
+ .start = IOP13XX_TPMI_IOP_CTRL(1),
+ .end = IOP13XX_TPMI_IOP_CTRL(1) + IOP13XX_TPMI_MEM_CTRL,
+ .flags = IORESOURCE_MEM,
+ },
[IOP13XX_TPMI_RESOURCE_IRQ] = {
.start = IRQ_IOP13XX_TPMI1_OUT,
.end = IRQ_IOP13XX_TPMI1_OUT,
@@ -99,6 +111,11 @@ static struct resource iop13xx_tpmi_2_resources[] = {
.end = IOP13XX_TPMI_CTRL(2) + IOP13XX_TPMI_MEM_CTRL,
.flags = IORESOURCE_MEM,
},
+ [IOP13XX_TPMI_RESOURCE_IOP_CTRL] = {
+ .start = IOP13XX_TPMI_IOP_CTRL(2),
+ .end = IOP13XX_TPMI_IOP_CTRL(2) + IOP13XX_TPMI_MEM_CTRL,
+ .flags = IORESOURCE_MEM,
+ },
[IOP13XX_TPMI_RESOURCE_IRQ] = {
.start = IRQ_IOP13XX_TPMI2_OUT,
.end = IRQ_IOP13XX_TPMI2_OUT,
@@ -122,6 +139,11 @@ static struct resource iop13xx_tpmi_3_resources[] = {
.end = IOP13XX_TPMI_CTRL(3) + IOP13XX_TPMI_MEM_CTRL,
.flags = IORESOURCE_MEM,
},
+ [IOP13XX_TPMI_RESOURCE_IOP_CTRL] = {
+ .start = IOP13XX_TPMI_IOP_CTRL(3),
+ .end = IOP13XX_TPMI_IOP_CTRL(3) + IOP13XX_TPMI_MEM_CTRL,
+ .flags = IORESOURCE_MEM,
+ },
[IOP13XX_TPMI_RESOURCE_IRQ] = {
.start = IRQ_IOP13XX_TPMI3_OUT,
.end = IRQ_IOP13XX_TPMI3_OUT,
@@ -133,7 +155,7 @@ u64 iop13xx_tpmi_mask = DMA_64BIT_MASK;
static struct platform_device iop13xx_tpmi_0_device = {
.name = "iop-tpmi",
.id = 0,
- .num_resources = 4,
+ .num_resources = ARRAY_SIZE(iop13xx_tpmi_0_resources),
.resource = iop13xx_tpmi_0_resources,
.dev = {
.dma_mask = &iop13xx_tpmi_mask,
@@ -144,7 +166,7 @@ static struct platform_device iop13xx_tpmi_0_device = {
static struct platform_device iop13xx_tpmi_1_device = {
.name = "iop-tpmi",
.id = 1,
- .num_resources = 4,
+ .num_resources = ARRAY_SIZE(iop13xx_tpmi_1_resources),
.resource = iop13xx_tpmi_1_resources,
.dev = {
.dma_mask = &iop13xx_tpmi_mask,
@@ -155,7 +177,7 @@ static struct platform_device iop13xx_tpmi_1_device = {
static struct platform_device iop13xx_tpmi_2_device = {
.name = "iop-tpmi",
.id = 2,
- .num_resources = 4,
+ .num_resources = ARRAY_SIZE(iop13xx_tpmi_2_resources),
.resource = iop13xx_tpmi_2_resources,
.dev = {
.dma_mask = &iop13xx_tpmi_mask,
@@ -166,7 +188,7 @@ static struct platform_device iop13xx_tpmi_2_device = {
static struct platform_device iop13xx_tpmi_3_device = {
.name = "iop-tpmi",
.id = 3,
- .num_resources = 4,
+ .num_resources = ARRAY_SIZE(iop13xx_tpmi_3_resources),
.resource = iop13xx_tpmi_3_resources,
.dev = {
.dma_mask = &iop13xx_tpmi_mask,
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 060909870b5..61b2dfcb89d 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -41,6 +41,22 @@ config ARCH_ADI_COYOTE
Engineering Coyote Gateway Reference Platform. For more
information on this platform, see <file:Documentation/arm/IXP4xx>.
+config MACH_GATEWAY7001
+ bool "Gateway 7001"
+ select PCI
+ help
+ Say 'Y' here if you want your kernel to support Gateway's
+ 7001 Access Point. For more information on this platform,
+ see http://openwrt.org
+
+config MACH_WG302V2
+ bool "Netgear WG302 v2 / WAG302 v2"
+ select PCI
+ help
+ Say 'Y' here if you want your kernel to support Netgear's
+ WG302 v2 or WAG302 v2 Access Points. For more information
+ on this platform, see http://openwrt.org
+
config ARCH_IXDP425
bool "IXDP425"
help
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 3b87c47e06c..77e00ade558 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -13,6 +13,8 @@ obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o
obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
+obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
+obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
obj-y += common.o
@@ -24,5 +26,7 @@ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o
obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
+obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
+obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c
new file mode 100644
index 00000000000..6abf568322d
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c
@@ -0,0 +1,63 @@
+/*
+ * arch/arch/mach-ixp4xx/gateway7001-pci.c
+ *
+ * PCI setup routines for Gateway 7001
+ *
+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * based on coyote-pci.c:
+ * Copyright (C) 2002 Jungo Software Technologies.
+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
+ *
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+
+#include <asm/mach/pci.h>
+
+void __init gateway7001_pci_preinit(void)
+{
+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
+
+ ixp4xx_pci_preinit();
+}
+
+static int __init gateway7001_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ if (slot == 1)
+ return IRQ_IXP4XX_GPIO11;
+ else if (slot == 2)
+ return IRQ_IXP4XX_GPIO10;
+ else return -1;
+}
+
+struct hw_pci gateway7001_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = gateway7001_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = ixp4xx_setup,
+ .scan = ixp4xx_scan_bus,
+ .map_irq = gateway7001_map_irq,
+};
+
+int __init gateway7001_pci_init(void)
+{
+ if (machine_is_gateway7001())
+ pci_common_init(&gateway7001_pci);
+ return 0;
+}
+
+subsys_initcall(gateway7001_pci_init);
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
new file mode 100644
index 00000000000..37876832e14
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -0,0 +1,108 @@
+/*
+ * arch/arm/mach-ixp4xx/gateway7001-setup.c
+ *
+ * Board setup for the Gateway 7001 board
+ *
+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * based on coyote-setup.c:
+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <Kaloz@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data gateway7001_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+};
+
+static struct resource gateway7001_flash_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device gateway7001_flash = {
+ .name = "IXP4XX-Flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &gateway7001_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &gateway7001_flash_resource,
+};
+
+static struct resource gateway7001_uart_resource = {
+ .start = IXP4XX_UART2_BASE_PHYS,
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct plat_serial8250_port gateway7001_uart_data[] = {
+ {
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ { },
+};
+
+static struct platform_device gateway7001_uart = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = gateway7001_uart_data,
+ },
+ .num_resources = 1,
+ .resource = &gateway7001_uart_resource,
+};
+
+static struct platform_device *gateway7001_devices[] __initdata = {
+ &gateway7001_flash,
+ &gateway7001_uart
+};
+
+static void __init gateway7001_init(void)
+{
+ ixp4xx_sys_init();
+
+ gateway7001_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ gateway7001_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+
+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+ platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices));
+}
+
+#ifdef CONFIG_MACH_GATEWAY7001
+MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .boot_params = 0x0100,
+ .init_machine = gateway7001_init,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
index a66484b63d3..0d5a4245582 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
@@ -25,17 +25,13 @@
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/irq.h>
+
#include <asm/mach-types.h>
#include <asm/hardware.h>
-#include <asm/irq.h>
#include <asm/arch/gtwx5715.h>
#include <asm/mach/pci.h>
-extern void ixp4xx_pci_preinit(void);
-extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-
-
/*
* The exact GPIO pins and IRQs are defined in arch-ixp4xx/gtwx5715.h
* Slot 0 isn't actually populated with a card connector but
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index ec4f07950ec..d5008d8fc9a 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -15,6 +15,10 @@
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -24,6 +28,7 @@
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
+#include <asm/delay.h>
static struct flash_platform_data ixdp425_flash_data = {
.map_name = "cfi_probe",
@@ -44,6 +49,77 @@ static struct platform_device ixdp425_flash = {
.resource = &ixdp425_flash_resource,
};
+#if defined(CONFIG_MTD_NAND_PLATFORM) || \
+ defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+
+#ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition ixdp425_partitions[] = {
+ {
+ .name = "ixp400 NAND FS 0",
+ .offset = 0,
+ .size = SZ_8M
+ }, {
+ .name = "ixp400 NAND FS 1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+#endif
+
+static void
+ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ int offset = (int)this->priv;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if (ctrl & NAND_NCE) {
+ gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_LOW);
+ udelay(5);
+ } else
+ gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_HIGH);
+
+ offset = (ctrl & NAND_CLE) ? IXDP425_NAND_CMD_BYTE : 0;
+ offset |= (ctrl & NAND_ALE) ? IXDP425_NAND_ADDR_BYTE : 0;
+ this->priv = (void *)offset;
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W + offset);
+}
+
+static struct platform_nand_data ixdp425_flash_nand_data = {
+ .chip = {
+ .chip_delay = 30,
+ .options = NAND_NO_AUTOINCR,
+#ifdef CONFIG_MTD_PARTITIONS
+ .part_probe_types = part_probes,
+ .partitions = ixdp425_partitions,
+ .nr_partitions = ARRAY_SIZE(ixdp425_partitions),
+#endif
+ },
+ .ctrl = {
+ .cmd_ctrl = ixdp425_flash_nand_cmd_ctrl
+ }
+};
+
+static struct resource ixdp425_flash_nand_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ixdp425_flash_nand = {
+ .name = "gen_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &ixdp425_flash_nand_data,
+ },
+ .num_resources = 1,
+ .resource = &ixdp425_flash_nand_resource,
+};
+#endif /* CONFIG_MTD_NAND_PLATFORM */
+
static struct ixp4xx_i2c_pins ixdp425_i2c_gpio_pins = {
.sda_pin = IXDP425_SDA_PIN,
.scl_pin = IXDP425_SCL_PIN,
@@ -104,6 +180,10 @@ static struct platform_device ixdp425_uart = {
static struct platform_device *ixdp425_devices[] __initdata = {
&ixdp425_i2c_controller,
&ixdp425_flash,
+#if defined(CONFIG_MTD_NAND_PLATFORM) || \
+ defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+ &ixdp425_flash_nand,
+#endif
&ixdp425_uart
};
@@ -115,6 +195,22 @@ static void __init ixdp425_init(void)
ixdp425_flash_resource.end =
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+#if defined(CONFIG_MTD_NAND_PLATFORM) || \
+ defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+ ixdp425_flash_nand_resource.start = IXP4XX_EXP_BUS_BASE(3),
+ ixdp425_flash_nand_resource.end = IXP4XX_EXP_BUS_BASE(3) + 0x10 - 1;
+
+ gpio_line_config(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_OUT);
+
+ /* Configure expansion bus for NAND Flash */
+ *IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN |
+ IXP4XX_EXP_BUS_STROBE_T(1) | /* extend by 1 clock */
+ IXP4XX_EXP_BUS_CYCLES(0) | /* Intel cycles */
+ IXP4XX_EXP_BUS_SIZE(0) | /* 512bytes addr space*/
+ IXP4XX_EXP_BUS_WR_EN |
+ IXP4XX_EXP_BUS_BYTE_EN; /* 8 bit data bus */
+#endif
+
if (cpu_is_ixp43x()) {
ixdp425_uart.num_resources = 1;
ixdp425_uart_data[1].flags = 0;
diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c
new file mode 100644
index 00000000000..6588f2c758e
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c
@@ -0,0 +1,63 @@
+/*
+ * arch/arch/mach-ixp4xx/wg302v2-pci.c
+ *
+ * PCI setup routines for the Netgear WG302 v2 and WAG302 v2
+ *
+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * based on coyote-pci.c:
+ * Copyright (C) 2002 Jungo Software Technologies.
+ * Copyright (C) 2003 MontaVista Software, Inc.
+ *
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+
+#include <asm/mach/pci.h>
+
+void __init wg302v2_pci_preinit(void)
+{
+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
+ set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW);
+
+ ixp4xx_pci_preinit();
+}
+
+static int __init wg302v2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ if (slot == 1)
+ return IRQ_IXP4XX_GPIO8;
+ else if (slot == 2)
+ return IRQ_IXP4XX_GPIO9;
+ else return -1;
+}
+
+struct hw_pci wg302v2_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = wg302v2_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = ixp4xx_setup,
+ .scan = ixp4xx_scan_bus,
+ .map_irq = wg302v2_map_irq,
+};
+
+int __init wg302v2_pci_init(void)
+{
+ if (machine_is_wg302v2())
+ pci_common_init(&wg302v2_pci);
+ return 0;
+}
+
+subsys_initcall(wg302v2_pci_init);
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
new file mode 100644
index 00000000000..f7e09ad804e
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -0,0 +1,109 @@
+/*
+ * arch/arm/mach-ixp4xx/wg302-setup.c
+ *
+ * Board setup for the Netgear WG302 v2 and WAG302 v2
+ *
+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
+ *
+ * based on coyote-setup.c:
+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <kaloz@openwrt.org>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data wg302v2_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+};
+
+static struct resource wg302v2_flash_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device wg302v2_flash = {
+ .name = "IXP4XX-Flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &wg302v2_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &wg302v2_flash_resource,
+};
+
+static struct resource wg302v2_uart_resource = {
+ .start = IXP4XX_UART2_BASE_PHYS,
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct plat_serial8250_port wg302v2_uart_data[] = {
+ {
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ { },
+};
+
+static struct platform_device wg302v2_uart = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = wg302v2_uart_data,
+ },
+ .num_resources = 1,
+ .resource = &wg302v2_uart_resource,
+};
+
+static struct platform_device *wg302v2_devices[] __initdata = {
+ &wg302v2_flash,
+ &wg302v2_uart,
+};
+
+static void __init wg302v2_init(void)
+{
+ ixp4xx_sys_init();
+
+ wg302v2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ wg302v2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+
+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+ platform_add_devices(wg302v2_devices, ARRAY_SIZE(wg302v2_devices));
+}
+
+#ifdef CONFIG_MACH_WG302V2
+MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .boot_params = 0x0100,
+ .init_machine = wg302v2_init,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index 56b7d337333..2a07a281fa8 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -3,7 +3,7 @@
# Makefile for KS8695 architecture support
#
-obj-y := cpu.o irq.o time.o devices.o
+obj-y := cpu.o irq.o time.o gpio.o devices.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c
new file mode 100644
index 00000000000..b1aa3cb3d4a
--- /dev/null
+++ b/arch/arm/mach-ks8695/gpio.c
@@ -0,0 +1,218 @@
+/*
+ * arch/arm/mach-ks8695/gpio.c
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/gpio.h>
+
+/*
+ * Configure a GPIO line for either GPIO function, or its internal
+ * function (Interrupt, Timer, etc).
+ */
+static void __init_or_module ks8695_gpio_mode(unsigned int pin, short gpio)
+{
+ unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
+ unsigned long x, flags;
+
+ if (pin > KS8695_GPIO_5) /* only GPIO 0..5 have internal functions */
+ return;
+
+ local_irq_save(flags);
+
+ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
+ if (gpio) /* GPIO: set bit to 0 */
+ x &= ~enable[pin];
+ else /* Internal function: set bit to 1 */
+ x |= enable[pin];
+ __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPC);
+
+ local_irq_restore(flags);
+}
+
+
+static unsigned short gpio_irq[] = { KS8695_IRQ_EXTERN0, KS8695_IRQ_EXTERN1, KS8695_IRQ_EXTERN2, KS8695_IRQ_EXTERN3 };
+
+/*
+ * Configure GPIO pin as external interrupt source.
+ */
+int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type)
+{
+ unsigned long x, flags;
+
+ if (pin > KS8695_GPIO_3) /* only GPIO 0..3 can generate IRQ */
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ /* set pin as input */
+ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+ x &= ~IOPM_(pin);
+ __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
+
+ local_irq_restore(flags);
+
+ /* Set IRQ triggering type */
+ set_irq_type(gpio_irq[pin], type);
+
+ /* enable interrupt mode */
+ ks8695_gpio_mode(pin, 0);
+
+ return 0;
+}
+EXPORT_SYMBOL(ks8695_gpio_interrupt);
+
+
+
+/* .... Generic GPIO interface .............................................. */
+
+/*
+ * Configure the GPIO line as an input.
+ */
+int __init_or_module gpio_direction_input(unsigned int pin)
+{
+ unsigned long x, flags;
+
+ if (pin > KS8695_GPIO_15)
+ return -EINVAL;
+
+ /* set pin to GPIO mode */
+ ks8695_gpio_mode(pin, 1);
+
+ local_irq_save(flags);
+
+ /* set pin as input */
+ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+ x &= ~IOPM_(pin);
+ __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+
+/*
+ * Configure the GPIO line as an output, with default state.
+ */
+int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state)
+{
+ unsigned long x, flags;
+
+ if (pin > KS8695_GPIO_15)
+ return -EINVAL;
+
+ /* set pin to GPIO mode */
+ ks8695_gpio_mode(pin, 1);
+
+ local_irq_save(flags);
+
+ /* set line state */
+ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+ if (state)
+ x |= (1 << pin);
+ else
+ x &= ~(1 << pin);
+ __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
+
+ /* set pin as output */
+ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+ x |= IOPM_(pin);
+ __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
+
+/*
+ * Set the state of an output GPIO line.
+ */
+void gpio_set_value(unsigned int pin, unsigned int state)
+{
+ unsigned long x, flags;
+
+ if (pin > KS8695_GPIO_15)
+ return;
+
+ local_irq_save(flags);
+
+ /* set output line state */
+ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+ if (state)
+ x |= (1 << pin);
+ else
+ x &= ~(1 << pin);
+ __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
+
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_set_value);
+
+
+/*
+ * Read the state of a GPIO line.
+ */
+int gpio_get_value(unsigned int pin)
+{
+ unsigned long x;
+
+ if (pin > KS8695_GPIO_15)
+ return -EINVAL;
+
+ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+ return (x & (1 << pin)) != 0;
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+
+/*
+ * Map GPIO line to IRQ number.
+ */
+int gpio_to_irq(unsigned int pin)
+{
+ if (pin > KS8695_GPIO_3) /* only GPIO 0..3 can generate IRQ */
+ return -EINVAL;
+
+ return gpio_irq[pin];
+}
+EXPORT_SYMBOL(gpio_to_irq);
+
+
+/*
+ * Map IRQ number to GPIO line.
+ */
+int irq_to_gpio(unsigned int irq)
+{
+ if ((irq < KS8695_IRQ_EXTERN0) || (irq > KS8695_IRQ_EXTERN3))
+ return -EINVAL;
+
+ return (irq - KS8695_IRQ_EXTERN0);
+}
+EXPORT_SYMBOL(irq_to_gpio);
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index 8f7c90a0593..34a31caa6f9 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -12,7 +12,6 @@
#include <asm/arch/pxa-regs.h>
#include <asm/hardware.h>
-#include <asm/semaphore.h>
struct clk {
struct list_head node;
@@ -25,21 +24,21 @@ struct clk {
};
static LIST_HEAD(clocks);
-static DECLARE_MUTEX(clocks_sem);
+static DEFINE_MUTEX(clocks_mutex);
static DEFINE_SPINLOCK(clocks_lock);
struct clk *clk_get(struct device *dev, const char *id)
{
struct clk *p, *clk = ERR_PTR(-ENOENT);
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_for_each_entry(p, &clocks, node) {
if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
clk = p;
break;
}
}
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
return clk;
}
@@ -101,18 +100,18 @@ static struct clk clk_gpio27 = {
int clk_register(struct clk *clk)
{
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_add(&clk->node, &clocks);
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
return 0;
}
EXPORT_SYMBOL(clk_register);
void clk_unregister(struct clk *clk)
{
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_del(&clk->node);
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
}
EXPORT_SYMBOL(clk_unregister);
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index a1a900d1666..aab27297b3c 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -44,6 +44,7 @@
#include <asm/hardware/scoop.h>
#include "generic.h"
+#include "devices.h"
#include "sharpsl.h"
@@ -368,7 +369,7 @@ MACHINE_START(CORGI, "SHARP Corgi")
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_corgi,
.map_io = pxa_map_io,
- .init_irq = pxa_init_irq,
+ .init_irq = pxa25x_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
@@ -380,7 +381,7 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd")
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_corgi,
.map_io = pxa_map_io,
- .init_irq = pxa_init_irq,
+ .init_irq = pxa25x_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
@@ -392,7 +393,7 @@ MACHINE_START(HUSKY, "SHARP Husky")
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_corgi,
.map_io = pxa_map_io,
- .init_irq = pxa_init_irq,
+ .init_irq = pxa25x_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
new file mode 100644
index 00000000000..9a6faff8e5a
--- /dev/null
+++ b/arch/arm/mach-pxa/devices.h
@@ -0,0 +1,11 @@
+extern struct platform_device pxamci_device;
+extern struct platform_device pxaudc_device;
+extern struct platform_device pxafb_device;
+extern struct platform_device ffuart_device;
+extern struct platform_device btuart_device;
+extern struct platform_device stuart_device;
+extern struct platform_device hwuart_device;
+extern struct platform_device pxai2c_device;
+extern struct platform_device pxai2s_device;
+extern struct platform_device pxaficp_device;
+extern struct platform_device pxartc_device;
diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c
index 4440babe7b9..93c4f31f127 100644
--- a/arch/arm/mach-pxa/dma.c
+++ b/arch/arm/mach-pxa/dma.c
@@ -25,12 +25,15 @@
#include <asm/arch/pxa-regs.h>
-static struct dma_channel {
+struct dma_channel {
char *name;
+ pxa_dma_prio prio;
void (*irq_handler)(int, void *);
void *data;
-} dma_channels[PXA_DMA_CHANNELS];
+};
+static struct dma_channel *dma_channels;
+static int num_dma_channels;
int pxa_request_dma (char *name, pxa_dma_prio prio,
void (*irq_handler)(int, void *),
@@ -47,8 +50,9 @@ int pxa_request_dma (char *name, pxa_dma_prio prio,
do {
/* try grabbing a DMA channel with the requested priority */
- pxa_for_each_dma_prio (i, prio) {
- if (!dma_channels[i].name) {
+ for (i = 0; i < num_dma_channels; i++) {
+ if ((dma_channels[i].prio == prio) &&
+ !dma_channels[i].name) {
found = 1;
break;
}
@@ -91,7 +95,7 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
{
int i, dint = DINT;
- for (i = 0; i < PXA_DMA_CHANNELS; i++) {
+ for (i = 0; i < num_dma_channels; i++) {
if (dint & (1 << i)) {
struct dma_channel *channel = &dma_channels[i];
if (channel->name && channel->irq_handler) {
@@ -109,18 +113,32 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static int __init pxa_dma_init (void)
+int __init pxa_init_dma(int num_ch)
{
- int ret;
+ int i, ret;
- ret = request_irq (IRQ_DMA, dma_irq_handler, 0, "DMA", NULL);
- if (ret)
+ dma_channels = kzalloc(sizeof(struct dma_channel) * num_ch, GFP_KERNEL);
+ if (dma_channels == NULL)
+ return -ENOMEM;
+
+ ret = request_irq(IRQ_DMA, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
+ if (ret) {
printk (KERN_CRIT "Wow! Can't register IRQ for DMA\n");
- return ret;
-}
+ kfree(dma_channels);
+ return ret;
+ }
-arch_initcall(pxa_dma_init);
+ /* dma channel priorities on pxa2xx processors:
+ * ch 0 - 3, 16 - 19 <--> (0) DMA_PRIO_HIGH
+ * ch 4 - 7, 20 - 23 <--> (1) DMA_PRIO_MEDIUM
+ * ch 8 - 15, 24 - 31 <--> (2) DMA_PRIO_LOW
+ */
+ for (i = 0; i < num_ch; i++)
+ dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
+
+ num_dma_channels = num_ch;
+ return 0;
+}
EXPORT_SYMBOL(pxa_request_dma);
EXPORT_SYMBOL(pxa_free_dma);
-
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 64b08b744f9..296539b6359 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -43,6 +43,7 @@
#include <asm/arch/irda.h>
#include <asm/arch/i2c.h>
+#include "devices.h"
#include "generic.h"
/*
@@ -242,7 +243,7 @@ static struct resource pxamci_resources[] = {
static u64 pxamci_dmamask = 0xffffffffUL;
-static struct platform_device pxamci_device = {
+struct platform_device pxamci_device = {
.name = "pxa2xx-mci",
.id = -1,
.dev = {
@@ -281,7 +282,7 @@ static struct resource pxa2xx_udc_resources[] = {
static u64 udc_dma_mask = ~(u32)0;
-static struct platform_device udc_device = {
+struct platform_device pxaudc_device = {
.name = "pxa2xx-udc",
.id = -1,
.resource = pxa2xx_udc_resources,
@@ -307,7 +308,7 @@ static struct resource pxafb_resources[] = {
static u64 fb_dma_mask = ~(u64)0;
-static struct platform_device pxafb_device = {
+struct platform_device pxafb_device = {
.name = "pxa2xx-fb",
.id = -1,
.dev = {
@@ -328,24 +329,24 @@ void __init set_pxa_fb_parent(struct device *parent_dev)
pxafb_device.dev.parent = parent_dev;
}
-static struct platform_device ffuart_device = {
+struct platform_device ffuart_device = {
.name = "pxa2xx-uart",
.id = 0,
};
-static struct platform_device btuart_device = {
+struct platform_device btuart_device = {
.name = "pxa2xx-uart",
.id = 1,
};
-static struct platform_device stuart_device = {
+struct platform_device stuart_device = {
.name = "pxa2xx-uart",
.id = 2,
};
-static struct platform_device hwuart_device = {
+struct platform_device hwuart_device = {
.name = "pxa2xx-uart",
.id = 3,
};
-static struct resource i2c_resources[] = {
+static struct resource pxai2c_resources[] = {
{
.start = 0x40301680,
.end = 0x403016a3,
@@ -357,40 +358,19 @@ static struct resource i2c_resources[] = {
},
};
-static struct platform_device i2c_device = {
+struct platform_device pxai2c_device = {
.name = "pxa2xx-i2c",
.id = 0,
- .resource = i2c_resources,
- .num_resources = ARRAY_SIZE(i2c_resources),
+ .resource = pxai2c_resources,
+ .num_resources = ARRAY_SIZE(pxai2c_resources),
};
-#ifdef CONFIG_PXA27x
-static struct resource i2c_power_resources[] = {
- {
- .start = 0x40f00180,
- .end = 0x40f001a3,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PWRI2C,
- .end = IRQ_PWRI2C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device i2c_power_device = {
- .name = "pxa2xx-i2c",
- .id = 1,
- .resource = i2c_power_resources,
- .num_resources = ARRAY_SIZE(i2c_resources),
-};
-#endif
-
void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
{
- i2c_device.dev.platform_data = info;
+ pxai2c_device.dev.platform_data = info;
}
-static struct resource i2s_resources[] = {
+static struct resource pxai2s_resources[] = {
{
.start = 0x40400000,
.end = 0x40400083,
@@ -402,16 +382,16 @@ static struct resource i2s_resources[] = {
},
};
-static struct platform_device i2s_device = {
+struct platform_device pxai2s_device = {
.name = "pxa2xx-i2s",
.id = -1,
- .resource = i2s_resources,
- .num_resources = ARRAY_SIZE(i2s_resources),
+ .resource = pxai2s_resources,
+ .num_resources = ARRAY_SIZE(pxai2s_resources),
};
static u64 pxaficp_dmamask = ~(u32)0;
-static struct platform_device pxaficp_device = {
+struct platform_device pxaficp_device = {
.name = "pxa2xx-ir",
.id = -1,
.dev = {
@@ -425,42 +405,7 @@ void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
pxaficp_device.dev.platform_data = info;
}
-static struct platform_device pxartc_device = {
+struct platform_device pxartc_device = {
.name = "sa1100-rtc",
.id = -1,
};
-
-static struct platform_device *devices[] __initdata = {
- &pxamci_device,
- &udc_device,
- &pxafb_device,
- &ffuart_device,
- &btuart_device,
- &stuart_device,
- &pxaficp_device,
- &i2c_device,
-#ifdef CONFIG_PXA27x
- &i2c_power_device,
-#endif
- &i2s_device,
- &pxartc_device,
-};
-
-static int __init pxa_init(void)
-{
- int cpuid, ret;
-
- ret = platform_add_devices(devices, ARRAY_SIZE(devices));
- if (ret)
- return ret;
-
- /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
- cpuid = read_cpuid(CPUID_ID);
- if (((cpuid >> 4) & 0xfff) == 0x2d0 ||
- ((cpuid >> 4) & 0xfff) == 0x290)
- ret = platform_device_register(&hwuart_device);
-
- return ret;
-}
-
-subsys_initcall(pxa_init);
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index e54a8dd63c1..91ab2ad8b34 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -12,8 +12,12 @@
struct sys_timer;
extern struct sys_timer pxa_timer;
+extern void __init pxa_init_irq_low(void);
+extern void __init pxa_init_irq_high(void);
+extern void __init pxa_init_irq_gpio(int gpio_nr);
+extern void __init pxa25x_init_irq(void);
+extern void __init pxa27x_init_irq(void);
extern void __init pxa_map_io(void);
-extern void __init pxa_init_irq(void);
extern unsigned int get_clk_frequency_khz(int info);
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 64df44043a6..465108da285 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -38,6 +38,7 @@
#include <asm/arch/mmc.h>
#include "generic.h"
+#include "devices.h"
/* TODO:
* - add pxa2xx_audio_ops_t device structure
@@ -152,7 +153,7 @@ static void __init idp_init(void)
static void __init idp_init_irq(void)
{
- pxa_init_irq();
+ pxa25x_init_irq();
set_irq_type(TOUCH_PANEL_IRQ, TOUCH_PANEL_IRQ_EDGE);
}
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 4619d5fe606..4b867b0789d 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -30,12 +30,12 @@
static void pxa_mask_low_irq(unsigned int irq)
{
- ICMR &= ~(1 << (irq + PXA_IRQ_SKIP));
+ ICMR &= ~(1 << irq);
}
static void pxa_unmask_low_irq(unsigned int irq)
{
- ICMR |= (1 << (irq + PXA_IRQ_SKIP));
+ ICMR |= (1 << irq);
}
static int pxa_set_wake(unsigned int irq, unsigned int on)
@@ -67,7 +67,27 @@ static struct irq_chip pxa_internal_chip_low = {
.set_wake = pxa_set_wake,
};
-#if PXA_INTERNAL_IRQS > 32
+void __init pxa_init_irq_low(void)
+{
+ int irq;
+
+ /* disable all IRQs */
+ ICMR = 0;
+
+ /* all IRQs are IRQ, not FIQ */
+ ICLR = 0;
+
+ /* only unmasked interrupts kick us out of idle */
+ ICCR = 1;
+
+ for (irq = PXA_IRQ(0); irq <= PXA_IRQ(31); irq++) {
+ set_irq_chip(irq, &pxa_internal_chip_low);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+}
+
+#ifdef CONFIG_PXA27x
/*
* This is for the second set of internal IRQs as found on the PXA27x.
@@ -75,12 +95,12 @@ static struct irq_chip pxa_internal_chip_low = {
static void pxa_mask_high_irq(unsigned int irq)
{
- ICMR2 &= ~(1 << (irq - 32 + PXA_IRQ_SKIP));
+ ICMR2 &= ~(1 << (irq - 32));
}
static void pxa_unmask_high_irq(unsigned int irq)
{
- ICMR2 |= (1 << (irq - 32 + PXA_IRQ_SKIP));
+ ICMR2 |= (1 << (irq - 32));
}
static struct irq_chip pxa_internal_chip_high = {
@@ -90,6 +110,19 @@ static struct irq_chip pxa_internal_chip_high = {
.unmask = pxa_unmask_high_irq,
};
+void __init pxa_init_irq_high(void)
+{
+ int irq;
+
+ ICMR2 = 0;
+ ICLR2 = 0;
+
+ for (irq = PXA_IRQ(32); irq < PXA_IRQ(64); irq++) {
+ set_irq_chip(irq, &pxa_internal_chip_high);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+}
#endif
/* Note that if an input/irq line ever gets changed to an output during
@@ -217,7 +250,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
do {
loop = 0;
- mask = GEDR0 & ~3;
+ mask = GEDR0 & GPIO_IRQ_mask[0] & ~3;
if (mask) {
GEDR0 = mask;
irq = IRQ_GPIO(2);
@@ -233,7 +266,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
loop = 1;
}
- mask = GEDR1;
+ mask = GEDR1 & GPIO_IRQ_mask[1];
if (mask) {
GEDR1 = mask;
irq = IRQ_GPIO(32);
@@ -248,7 +281,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
loop = 1;
}
- mask = GEDR2;
+ mask = GEDR2 & GPIO_IRQ_mask[2];
if (mask) {
GEDR2 = mask;
irq = IRQ_GPIO(64);
@@ -263,8 +296,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
loop = 1;
}
-#if PXA_LAST_GPIO >= 96
- mask = GEDR3;
+ mask = GEDR3 & GPIO_IRQ_mask[3];
if (mask) {
GEDR3 = mask;
irq = IRQ_GPIO(96);
@@ -278,7 +310,6 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
} while (mask);
loop = 1;
}
-#endif
} while (loop);
}
@@ -314,64 +345,27 @@ static struct irq_chip pxa_muxed_gpio_chip = {
.set_wake = pxa_set_gpio_wake,
};
-
-void __init pxa_init_irq(void)
+void __init pxa_init_irq_gpio(int gpio_nr)
{
- int irq;
-
- /* disable all IRQs */
- ICMR = 0;
-
- /* all IRQs are IRQ, not FIQ */
- ICLR = 0;
+ int irq, i;
/* clear all GPIO edge detects */
- GFER0 = 0;
- GFER1 = 0;
- GFER2 = 0;
- GRER0 = 0;
- GRER1 = 0;
- GRER2 = 0;
- GEDR0 = GEDR0;
- GEDR1 = GEDR1;
- GEDR2 = GEDR2;
-
-#ifdef CONFIG_PXA27x
- /* And similarly for the extra regs on the PXA27x */
- ICMR2 = 0;
- ICLR2 = 0;
- GFER3 = 0;
- GRER3 = 0;
- GEDR3 = GEDR3;
-#endif
-
- /* only unmasked interrupts kick us out of idle */
- ICCR = 1;
+ for (i = 0; i < gpio_nr; i += 32) {
+ GFER(i) = 0;
+ GRER(i) = 0;
+ GEDR(i) = GEDR(i);
+ }
/* GPIO 0 and 1 must have their mask bit always set */
GPIO_IRQ_mask[0] = 3;
- for (irq = PXA_IRQ(PXA_IRQ_SKIP); irq <= PXA_IRQ(31); irq++) {
- set_irq_chip(irq, &pxa_internal_chip_low);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
-#if PXA_INTERNAL_IRQS > 32
- for (irq = PXA_IRQ(32); irq < PXA_IRQ(PXA_INTERNAL_IRQS); irq++) {
- set_irq_chip(irq, &pxa_internal_chip_high);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-#endif
-
for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
set_irq_chip(irq, &pxa_low_gpio_chip);
set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
- for (irq = IRQ_GPIO(2); irq <= IRQ_GPIO(PXA_LAST_GPIO); irq++) {
+ for (irq = IRQ_GPIO(2); irq <= IRQ_GPIO(gpio_nr); irq++) {
set_irq_chip(irq, &pxa_muxed_gpio_chip);
set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index e3097664ffe..26116440a7c 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -46,6 +46,7 @@
#include <asm/arch/ohci.h>
#include "generic.h"
+#include "devices.h"
static unsigned int lpd270_irq_enabled;
@@ -97,7 +98,7 @@ static void __init lpd270_init_irq(void)
{
int irq;
- pxa_init_irq();
+ pxa27x_init_irq();
__raw_writew(0, LPD270_INT_MASK);
__raw_writew(0, LPD270_INT_STATUS);
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 6377b2e29ff..e70048fd00a 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -48,6 +48,7 @@
#include <asm/arch/mmc.h>
#include "generic.h"
+#include "devices.h"
#define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
@@ -103,7 +104,7 @@ static void __init lubbock_init_irq(void)
{
int irq;
- pxa_init_irq();
+ pxa25x_init_irq();
/* setup extra lubbock irqs */
for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index ed99a81b98f..b02c79c7e6a 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -46,6 +46,7 @@
#include <asm/arch/ohci.h>
#include "generic.h"
+#include "devices.h"
static unsigned long mainstone_irq_enabled;
@@ -89,7 +90,7 @@ static void __init mainstone_init_irq(void)
{
int irq;
- pxa_init_irq();
+ pxa27x_init_irq();
/* setup extra Mainstone irqs */
for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 6bf15ae7384..e66dbc26add 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -77,7 +77,6 @@ int pxa_pm_enter(suspend_state_t state)
{
unsigned long sleep_save[SLEEP_SAVE_SIZE];
unsigned long checksum = 0;
- struct timespec delta, rtc;
int i;
extern void pxa_cpu_pm_enter(suspend_state_t state);
@@ -87,11 +86,6 @@ int pxa_pm_enter(suspend_state_t state)
iwmmxt_task_disable(NULL);
#endif
- /* preserve current time */
- rtc.tv_sec = RCNR;
- rtc.tv_nsec = 0;
- save_time_delta(&delta, &rtc);
-
SAVE(GPLR0); SAVE(GPLR1); SAVE(GPLR2);
SAVE(GPDR0); SAVE(GPDR1); SAVE(GPDR2);
SAVE(GRER0); SAVE(GRER1); SAVE(GRER2);
@@ -183,10 +177,6 @@ int pxa_pm_enter(suspend_state_t state)
RESTORE(PSTR);
- /* restore current time */
- rtc.tv_sec = RCNR;
- restore_time_delta(&delta, &rtc);
-
#ifdef DEBUG
printk(KERN_DEBUG "*** made it back from resume\n");
#endif
@@ -200,40 +190,3 @@ unsigned long sleep_phys_sp(void *sp)
{
return virt_to_phys(sp);
}
-
-/*
- * Called after processes are frozen, but before we shut down devices.
- */
-int pxa_pm_prepare(suspend_state_t state)
-{
- extern int pxa_cpu_pm_prepare(suspend_state_t state);
-
- return pxa_cpu_pm_prepare(state);
-}
-
-EXPORT_SYMBOL_GPL(pxa_pm_prepare);
-
-/*
- * Called after devices are re-setup, but before processes are thawed.
- */
-int pxa_pm_finish(suspend_state_t state)
-{
- return 0;
-}
-
-EXPORT_SYMBOL_GPL(pxa_pm_finish);
-
-static struct pm_ops pxa_pm_ops = {
- .prepare = pxa_pm_prepare,
- .enter = pxa_pm_enter,
- .finish = pxa_pm_finish,
- .valid = pm_valid_only_mem,
-};
-
-static int __init pxa_pm_init(void)
-{
- pm_set_ops(&pxa_pm_ops);
- return 0;
-}
-
-device_initcall(pxa_pm_init);
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 34fb80b3702..655668d4d0e 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -45,6 +45,7 @@
#include <asm/mach/sharpsl_param.h>
#include "generic.h"
+#include "devices.h"
#include "sharpsl.h"
static struct resource poodle_scoop_resources[] = {
@@ -412,7 +413,7 @@ MACHINE_START(POODLE, "SHARP Poodle")
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_poodle,
.map_io = pxa_map_io,
- .init_irq = pxa_init_irq,
+ .init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
.init_machine = poodle_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index c1f21739bf7..f36ca448338 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -19,12 +19,17 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/platform_device.h>
#include <linux/pm.h>
#include <asm/hardware.h>
+#include <asm/arch/irqs.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pm.h>
+#include <asm/arch/dma.h>
#include "generic.h"
+#include "devices.h"
/*
* Various clock factors driven by the CCCR register.
@@ -105,18 +110,6 @@ EXPORT_SYMBOL(get_lcdclk_frequency_10khz);
#ifdef CONFIG_PM
-int pxa_cpu_pm_prepare(suspend_state_t state)
-{
- switch (state) {
- case PM_SUSPEND_MEM:
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
void pxa_cpu_pm_enter(suspend_state_t state)
{
extern void pxa_cpu_suspend(unsigned int);
@@ -133,4 +126,49 @@ void pxa_cpu_pm_enter(suspend_state_t state)
}
}
+static struct pm_ops pxa25x_pm_ops = {
+ .enter = pxa_pm_enter,
+ .valid = pm_valid_only_mem,
+};
+#endif
+
+void __init pxa25x_init_irq(void)
+{
+ pxa_init_irq_low();
+ pxa_init_irq_gpio(85);
+}
+
+static struct platform_device *pxa25x_devices[] __initdata = {
+ &pxamci_device,
+ &pxaudc_device,
+ &pxafb_device,
+ &ffuart_device,
+ &btuart_device,
+ &stuart_device,
+ &pxai2c_device,
+ &pxai2s_device,
+ &pxaficp_device,
+ &pxartc_device,
+};
+
+static int __init pxa25x_init(void)
+{
+ int ret = 0;
+
+ if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
+ if ((ret = pxa_init_dma(16)))
+ return ret;
+#ifdef CONFIG_PM
+ pm_set_ops(&pxa25x_pm_ops);
#endif
+ ret = platform_add_devices(pxa25x_devices,
+ ARRAY_SIZE(pxa25x_devices));
+ }
+ /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
+ if (cpu_is_pxa25x())
+ ret = platform_device_register(&hwuart_device);
+
+ return ret;
+}
+
+subsys_initcall(pxa25x_init);
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 1939acc3f9f..aa5bb02c897 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -19,10 +19,14 @@
#include <asm/hardware.h>
#include <asm/irq.h>
+#include <asm/arch/irqs.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/ohci.h>
+#include <asm/arch/pm.h>
+#include <asm/arch/dma.h>
#include "generic.h"
+#include "devices.h"
/* Crystal clock: 13MHz */
#define BASE_CLK 13000000
@@ -122,17 +126,6 @@ EXPORT_SYMBOL(get_lcdclk_frequency_10khz);
#ifdef CONFIG_PM
-int pxa_cpu_pm_prepare(suspend_state_t state)
-{
- switch (state) {
- case PM_SUSPEND_MEM:
- case PM_SUSPEND_STANDBY:
- return 0;
- default:
- return -EINVAL;
- }
-}
-
void pxa_cpu_pm_enter(suspend_state_t state)
{
extern void pxa_cpu_standby(void);
@@ -162,6 +155,15 @@ void pxa_cpu_pm_enter(suspend_state_t state)
}
}
+static int pxa27x_pm_valid(suspend_state_t state)
+{
+ return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
+}
+
+static struct pm_ops pxa27x_pm_ops = {
+ .enter = pxa_pm_enter,
+ .valid = pxa27x_pm_valid,
+};
#endif
/*
@@ -183,7 +185,7 @@ static struct resource pxa27x_ohci_resources[] = {
},
};
-static struct platform_device ohci_device = {
+static struct platform_device pxaohci_device = {
.name = "pxa27x-ohci",
.id = -1,
.dev = {
@@ -196,16 +198,62 @@ static struct platform_device ohci_device = {
void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
{
- ohci_device.dev.platform_data = info;
+ pxaohci_device.dev.platform_data = info;
}
+static struct resource i2c_power_resources[] = {
+ {
+ .start = 0x40f00180,
+ .end = 0x40f001a3,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PWRI2C,
+ .end = IRQ_PWRI2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device pxai2c_power_device = {
+ .name = "pxa2xx-i2c",
+ .id = 1,
+ .resource = i2c_power_resources,
+ .num_resources = ARRAY_SIZE(i2c_power_resources),
+};
+
static struct platform_device *devices[] __initdata = {
- &ohci_device,
+ &pxamci_device,
+ &pxaudc_device,
+ &pxafb_device,
+ &ffuart_device,
+ &btuart_device,
+ &stuart_device,
+ &pxai2c_device,
+ &pxai2c_power_device,
+ &pxai2s_device,
+ &pxaficp_device,
+ &pxartc_device,
+ &pxaohci_device,
};
+void __init pxa27x_init_irq(void)
+{
+ pxa_init_irq_low();
+ pxa_init_irq_high();
+ pxa_init_irq_gpio(128);
+}
+
static int __init pxa27x_init(void)
{
- return platform_add_devices(devices, ARRAY_SIZE(devices));
+ int ret = 0;
+ if (cpu_is_pxa27x()) {
+ if ((ret = pxa_init_dma(32)))
+ return ret;
+#ifdef CONFIG_PM
+ pm_set_ops(&pxa27x_pm_ops);
+#endif
+ ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+ }
+ return ret;
}
subsys_initcall(pxa27x_init);
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 3cbac63bed3..bae47e145de 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -48,6 +48,7 @@
#include <asm/hardware/scoop.h>
#include "generic.h"
+#include "devices.h"
#include "sharpsl.h"
/*
@@ -560,7 +561,7 @@ MACHINE_START(SPITZ, "SHARP Spitz")
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_spitz,
.map_io = pxa_map_io,
- .init_irq = pxa_init_irq,
+ .init_irq = pxa27x_init_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
MACHINE_END
@@ -572,7 +573,7 @@ MACHINE_START(BORZOI, "SHARP Borzoi")
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_spitz,
.map_io = pxa_map_io,
- .init_irq = pxa_init_irq,
+ .init_irq = pxa27x_init_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
MACHINE_END
@@ -584,7 +585,7 @@ MACHINE_START(AKITA, "SHARP Akita")
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_spitz,
.map_io = pxa_map_io,
- .init_irq = pxa_init_irq,
+ .init_irq = pxa27x_init_irq,
.init_machine = akita_init,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 5248abe334d..6f91fd2d061 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -30,11 +30,6 @@
#include <asm/arch/pxa-regs.h>
-static inline unsigned long pxa_get_rtc_time(void)
-{
- return RCNR;
-}
-
static int pxa_set_rtc(void)
{
unsigned long current_time = xtime.tv_sec;
@@ -122,10 +117,6 @@ static void __init pxa_timer_init(void)
set_rtc = pxa_set_rtc;
- tv.tv_nsec = 0;
- tv.tv_sec = pxa_get_rtc_time();
- do_settimeofday(&tv);
-
OIER = 0; /* disable any timer interrupts */
OSSR = 0xf; /* clear status on all timers */
setup_irq(IRQ_OST0, &pxa_timer_irq);
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 72738771fb5..240fd042083 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -42,7 +42,7 @@
#include <asm/mach/sharpsl_param.h>
#include "generic.h"
-
+#include "devices.h"
/*
* SCOOP Device
@@ -332,7 +332,7 @@ MACHINE_START(TOSA, "SHARP Tosa")
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_tosa,
.map_io = pxa_map_io,
- .init_irq = pxa_init_irq,
+ .init_irq = pxa25x_init_irq,
.init_machine = tosa_init,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 28c79bd0a3a..e4ba43bdf85 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -49,6 +49,7 @@
#include <asm/arch/ohci.h>
#include "generic.h"
+#include "devices.h"
/********************************************************************************************
* ONBOARD FLASH
@@ -503,7 +504,7 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
.boot_params = TRIZEPS4_SDRAM_BASE + 0x100,
.init_machine = trizeps4_init,
.map_io = trizeps4_map_io,
- .init_irq = pxa_init_irq,
+ .init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index f01de807b72..8b52ea95d4f 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -20,6 +20,8 @@
#include <linux/platform_device.h>
#include <linux/dm9000.h>
+#include <net/ax88796.h>
+
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
@@ -409,6 +411,61 @@ static struct s3c2410_platform_i2c bast_i2c_info = {
.max_freq = 130*1000,
};
+/* Asix AX88796 10/100 ethernet controller */
+
+static struct ax_plat_data bast_asix_platdata = {
+ .flags = AXFLG_MAC_FROMDEV,
+ .wordlength = 2,
+ .dcr_val = 0x48,
+ .rcr_val = 0x40,
+};
+
+static struct resource bast_asix_resource[] = {
+ [0] = {
+ .start = S3C2410_CS5 + BAST_PA_ASIXNET,
+ .end = S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20) - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20),
+ .end = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20),
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = IRQ_ASIX,
+ .end = IRQ_ASIX,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct platform_device bast_device_asix = {
+ .name = "ax88796",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bast_asix_resource),
+ .resource = bast_asix_resource,
+ .dev = {
+ .platform_data = &bast_asix_platdata
+ }
+};
+
+/* Asix AX88796 10/100 ethernet controller parallel port */
+
+static struct resource bast_asixpp_resource[] = {
+ [0] = {
+ .start = S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20),
+ .end = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1b * 0x20) - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device bast_device_axpp = {
+ .name = "ax88796-pp",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bast_asixpp_resource),
+ .resource = bast_asixpp_resource,
+};
+
+/* LCD/VGA controller */
static struct s3c2410fb_mach_info __initdata bast_lcd_info = {
.width = 640,
@@ -453,6 +510,8 @@ static struct platform_device *bast_devices[] __initdata = {
&s3c_device_nand,
&bast_device_nor,
&bast_device_dm9k,
+ &bast_device_asix,
+ &bast_device_axpp,
&bast_sio,
};
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index bff7ddd06a5..29c163d300d 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -18,6 +18,9 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
@@ -42,6 +45,8 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
+#include <net/ax88796.h>
+
#include <asm/plat-s3c24xx/clock.h>
#include <asm/plat-s3c24xx/devs.h>
#include <asm/plat-s3c24xx/cpu.h>
@@ -153,6 +158,29 @@ static struct mtd_partition anubis_default_nand_part[] = {
}
};
+static struct mtd_partition anubis_default_nand_part_large[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_128K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_128K,
+ .offset = SZ_128K,
+ },
+ [2] = {
+ .name = "user1",
+ .offset = SZ_4M,
+ .size = SZ_32M - SZ_4M,
+ },
+ [3] = {
+ .name = "user2",
+ .offset = SZ_32M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
/* the Anubis has 3 selectable slots for nand-flash, the two
* on-board chip areas, as well as the external slot.
*
@@ -260,6 +288,104 @@ static struct platform_device anubis_device_ide1 = {
.resource = anubis_ide1_resource,
};
+/* Asix AX88796 10/100 ethernet controller */
+
+static struct ax_plat_data anubis_asix_platdata = {
+ .flags = AXFLG_MAC_FROMDEV,
+ .wordlength = 2,
+ .dcr_val = 0x48,
+ .rcr_val = 0x40,
+};
+
+static struct resource anubis_asix_resource[] = {
+ [0] = {
+ .start = S3C2410_CS5,
+ .end = S3C2410_CS5 + (0x20 * 0x20) -1,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = IRQ_ASIX,
+ .end = IRQ_ASIX,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct platform_device anubis_device_asix = {
+ .name = "ax88796",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(anubis_asix_resource),
+ .resource = anubis_asix_resource,
+ .dev = {
+ .platform_data = &anubis_asix_platdata,
+ }
+};
+
+/* SM501 */
+
+static struct resource anubis_sm501_resource[] = {
+ [0] = {
+ .start = S3C2410_CS2,
+ .end = S3C2410_CS2 + SZ_8M,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = S3C2410_CS2 + SZ_64M - SZ_2M,
+ .end = S3C2410_CS2 + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = IRQ_EINT0,
+ .end = IRQ_EINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct sm501_initdata anubis_sm501_initdata = {
+ .gpio_high = {
+ .set = 0x3F000000, /* 24bit panel */
+ .mask = 0x0,
+ },
+ .misc_timing = {
+ .set = 0x010100, /* SDRAM timing */
+ .mask = 0x1F1F00,
+ },
+ .misc_control = {
+ .set = SM501_MISC_PNL_24BIT,
+ .mask = 0,
+ },
+
+ /* set the SDRAM and bus clocks */
+ .mclk = 72 * MHZ,
+ .m1xclk = 144 * MHZ,
+};
+
+static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
+ [0] = {
+ .pin_scl = 44,
+ .pin_sda = 45,
+ },
+ [1] = {
+ .pin_scl = 40,
+ .pin_sda = 41,
+ },
+};
+
+static struct sm501_platdata anubis_sm501_platdata = {
+ .init = &anubis_sm501_initdata,
+ .gpio_i2c = anubis_sm501_gpio_i2c,
+ .gpio_i2c_nr = ARRAY_SIZE(anubis_sm501_gpio_i2c),
+};
+
+static struct platform_device anubis_device_sm501 = {
+ .name = "sm501",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(anubis_sm501_resource),
+ .resource = anubis_sm501_resource,
+ .dev = {
+ .platform_data = &anubis_sm501_platdata,
+ },
+};
+
/* Standard Anubis devices */
static struct platform_device *anubis_devices[] __initdata = {
@@ -271,6 +397,8 @@ static struct platform_device *anubis_devices[] __initdata = {
&s3c_device_nand,
&anubis_device_ide0,
&anubis_device_ide1,
+ &anubis_device_asix,
+ &anubis_device_sm501,
};
static struct clk *anubis_clocks[] = {
@@ -304,8 +432,17 @@ static void __init anubis_map_io(void)
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
- /* ensure that the GPIO is setup */
- s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+ /* check for the newer revision boards with large page nand */
+
+ if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) {
+ printk(KERN_INFO "ANUBIS-B detected (revision %d)\n",
+ __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK);
+ anubis_nand_sets[0].partitions = anubis_default_nand_part_large;
+ anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
+ } else {
+ /* ensure that the GPIO is setup */
+ s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+ }
}
static void __init anubis_init(void)
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 15811601f03..89f4c9c5777 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -166,6 +166,29 @@ static struct mtd_partition osiris_default_nand_part[] = {
}
};
+static struct mtd_partition osiris_default_nand_part_large[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_128K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_128K,
+ .offset = SZ_128K,
+ },
+ [2] = {
+ .name = "user1",
+ .offset = SZ_4M,
+ .size = SZ_32M - SZ_4M,
+ },
+ [3] = {
+ .name = "user2",
+ .offset = SZ_32M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
/* the Osiris has 3 selectable slots for nand-flash, the two
* on-board chip areas, as well as the external slot.
*
@@ -322,14 +345,23 @@ static void __init osiris_map_io(void)
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
+ /* check for the newer revision boards with large page nand */
+
+ if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) {
+ printk(KERN_INFO "OSIRIS-B detected (revision %d)\n",
+ __raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK);
+ osiris_nand_sets[0].partitions = osiris_default_nand_part_large;
+ osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
+ } else {
+ /* write-protect line to the NAND */
+ s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+ }
+
/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
local_irq_save(flags);
__raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
local_irq_restore(flags);
-
- /* write-protect line to the NAND */
- s3c2410_gpio_setpin(S3C2410_GPA0, 1);
}
static void __init osiris_init(void)
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index d674cf34315..01a37d3c072 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -57,12 +57,7 @@ enum { SLEEP_SAVE_SP = 0,
static int sa11x0_pm_enter(suspend_state_t state)
{
unsigned long gpio, sleep_save[SLEEP_SAVE_SIZE];
- struct timespec delta, rtc;
- /* preserve current time */
- rtc.tv_sec = RCNR;
- rtc.tv_nsec = 0;
- save_time_delta(&delta, &rtc);
gpio = GPLR;
/* save vital registers */
@@ -119,10 +114,6 @@ static int sa11x0_pm_enter(suspend_state_t state)
*/
PSSR = PSSR_PH;
- /* restore current time */
- rtc.tv_sec = RCNR;
- restore_time_delta(&delta, &rtc);
-
return 0;
}
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 29cb0c1604a..fdf7b016e7a 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -21,25 +21,6 @@
#define RTC_DEF_DIVIDER (32768 - 1)
#define RTC_DEF_TRIM 0
-static unsigned long __init sa1100_get_rtc_time(void)
-{
- /*
- * According to the manual we should be able to let RTTR be zero
- * and then a default divisor for a 32.768KHz clock is used.
- * Apparently this doesn't work, at least for my SA1110 rev 5.
- * If the clock divider is uninitialized then reset it to the
- * default value to get the 1Hz clock.
- */
- if (RTTR == 0) {
- RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
- printk(KERN_WARNING "Warning: uninitialized Real Time Clock\n");
- /* The current RTC value probably doesn't make sense either */
- RCNR = 0;
- return 0;
- }
- return RCNR;
-}
-
static int sa1100_set_rtc(void)
{
unsigned long current_time = xtime.tv_sec;
@@ -117,15 +98,10 @@ static struct irqaction sa1100_timer_irq = {
static void __init sa1100_timer_init(void)
{
- struct timespec tv;
unsigned long flags;
set_rtc = sa1100_set_rtc;
- tv.tv_nsec = 0;
- tv.tv_sec = sa1100_get_rtc_time();
- do_settimeofday(&tv);
-
OIER = 0; /* disable any timer interrupts */
OSSR = 0xf; /* clear status on all timers */
setup_irq(IRQ_OST0, &sa1100_timer_irq);
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index f3ade18862a..75952779ce1 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -280,7 +280,10 @@ __arm_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
if (!type)
return NULL;
- size = PAGE_ALIGN(size);
+ /*
+ * Page align the mapping size, taking account of any offset.
+ */
+ size = PAGE_ALIGN(offset + size);
area = get_vm_area(size, VM_IOREMAP);
if (!area)
@@ -325,11 +328,6 @@ __arm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
if (!size || last_addr < phys_addr)
return NULL;
- /*
- * Page align the mapping size
- */
- size = PAGE_ALIGN(last_addr + 1) - phys_addr;
-
return __arm_ioremap_pfn(pfn, offset, size, mtype);
}
EXPORT_SYMBOL(__arm_ioremap);