diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/sparc/Kconfig | 7 | ||||
| -rw-r--r-- | arch/sparc/include/asm/leon.h | 3 | ||||
| -rw-r--r-- | arch/sparc/kernel/Makefile | 1 | ||||
| -rw-r--r-- | arch/sparc/kernel/leon_kernel.c | 15 | ||||
| -rw-r--r-- | arch/sparc/kernel/leon_pci_grpci2.c | 897 |
5 files changed, 923 insertions, 0 deletions
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index ec748c4c16c..730dda1ad14 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -538,6 +538,13 @@ config LEON_PCI depends on PCI && SPARC_LEON default y +config GRPCI2 + bool "GRPCI2 Host Bridge Support" + depends on LEON_PCI + default y + help + Say Y here to include the GRPCI2 Host Bridge Driver. + source "drivers/pci/Kconfig" source "drivers/pcmcia/Kconfig" diff --git a/arch/sparc/include/asm/leon.h b/arch/sparc/include/asm/leon.h index 6bdaf1e43d2..a4e457f003e 100644 --- a/arch/sparc/include/asm/leon.h +++ b/arch/sparc/include/asm/leon.h @@ -318,6 +318,9 @@ struct device_node; extern unsigned int leon_build_device_irq(unsigned int real_irq, irq_flow_handler_t flow_handler, const char *name, int do_ack); +extern void leon_update_virq_handling(unsigned int virq, + irq_flow_handler_t flow_handler, + const char *name, int do_ack); extern void leon_clear_clock_irq(void); extern void leon_load_profile_irq(int cpu, unsigned int limit); extern void leon_init_timers(irq_handler_t counter_fn); diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile index b02d2e3f36b..b90b4a1d070 100644 --- a/arch/sparc/kernel/Makefile +++ b/arch/sparc/kernel/Makefile @@ -75,6 +75,7 @@ obj-y += dma.o obj-$(CONFIG_PCIC_PCI) += pcic.o obj-$(CONFIG_LEON_PCI) += leon_pci.o +obj-$(CONFIG_GRPCI2) += leon_pci_grpci2.o obj-$(CONFIG_SMP) += trampoline_$(BITS).o smp_$(BITS).o obj-$(CONFIG_SPARC32_SMP) += sun4m_smp.o sun4d_smp.o leon_smp.o diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c index 2f538ac2e13..c23d61e9e52 100644 --- a/arch/sparc/kernel/leon_kernel.c +++ b/arch/sparc/kernel/leon_kernel.c @@ -236,6 +236,21 @@ static unsigned int _leon_build_device_irq(struct platform_device *op, return leon_build_device_irq(real_irq, handle_simple_irq, "edge", 0); } +void leon_update_virq_handling(unsigned int virq, + irq_flow_handler_t flow_handler, + const char *name, int do_ack) +{ + unsigned long mask = (unsigned long)irq_get_chip_data(virq); + + mask &= ~LEON_DO_ACK_HW; + if (do_ack) + mask |= LEON_DO_ACK_HW; + + irq_set_chip_and_handler_name(virq, &leon_irq, + flow_handler, name); + irq_set_chip_data(virq, (void *)mask); +} + void __init leon_init_timers(irq_handler_t counter_fn) { int irq, eirq; diff --git a/arch/sparc/kernel/leon_pci_grpci2.c b/arch/sparc/kernel/leon_pci_grpci2.c new file mode 100644 index 00000000000..44dc093ee33 --- /dev/null +++ b/arch/sparc/kernel/leon_pci_grpci2.c @@ -0,0 +1,897 @@ +/* + * leon_pci_grpci2.c: GRPCI2 Host PCI driver + * + * Copyright (C) 2011 Aeroflex Gaisler AB, Daniel Hellstrom + * + */ + +#include <linux/of_device.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <asm/io.h> +#include <asm/leon.h> +#include <asm/vaddrs.h> +#include <asm/sections.h> +#include <asm/leon_pci.h> + +#include "irq.h" + +struct grpci2_barcfg { + unsigned long pciadr; /* PCI Space Address */ + unsigned long ahbadr; /* PCI Base address mapped to this AHB addr */ +}; + +/* Device Node Configuration options: + * - barcfgs : Custom Configuration of Host's 6 target BARs + * - irq_mask : Limit which PCI interrupts are enabled + * - do_reset : Force PCI Reset on startup + * + * barcfgs + * ======= + * + * Optional custom Target BAR configuration (see struct grpci2_barcfg). All + * addresses are physical. Array always contains 6 elements (len=2*4*6 bytes) + * + * -1 means not configured (let host driver do default setup). + * + * [i*2+0] = PCI Address of BAR[i] on target interface + * [i*2+1] = Accessing PCI address of BAR[i] result in this AMBA address + * + * + * irq_mask + * ======== + * + * Limit which PCI interrupts are enabled. 0=Disable, 1=Enable. By default + * all are enabled. Use this when PCI interrupt pins are floating on PCB. + * int, len=4. + * bit0 = PCI INTA# + * bit1 = PCI INTB# + * bit2 = PCI INTC# + * bit3 = PCI INTD# + * + * + * reset + * ===== + * + * Force PCI reset on startup. int, len=4 + */ + +/* Enable Debugging Configuration Space Access */ +#undef GRPCI2_DEBUG_CFGACCESS + +/* + * GRPCI2 APB Register MAP + */ +struct grpci2_regs { + unsigned int ctrl; /* 0x00 Control */ + unsigned int sts_cap; /* 0x04 Status / Capabilities */ + int res1; /* 0x08 */ + unsigned int io_map; /* 0x0C I/O Map address */ + unsigned int dma_ctrl; /* 0x10 DMA */ + unsigned int dma_bdbase; /* 0x14 DMA */ + int res2[2]; /* 0x18 */ + unsigned int bars[6]; /* 0x20 read-only PCI BARs */ + int res3[2]; /* 0x38 */ + unsigned int ahbmst_map[16]; /* 0x40 AHB->PCI Map per AHB Master */ + + /* PCI Trace Buffer Registers (OPTIONAL) */ + unsigned int t_ctrl; /* 0x80 */ + unsigned int t_cnt; /* 0x84 */ + unsigned int t_adpat; /* 0x88 */ + unsigned int t_admask; /* 0x8C */ + unsigned int t_sigpat; /* 0x90 */ + unsigned int t_sigmask; /* 0x94 */ + unsigned int t_adstate; /* 0x98 */ + unsigned int t_sigstate; /* 0x9C */ +}; + +#define REGLOAD(a) (be32_to_cpu(__raw_readl(&(a)))) +#define REGSTORE(a, v) (__raw_writel(cpu_to_be32(v), &(a))) + +#define CTRL_BUS_BIT 16 + +#define CTRL_RESET (1<<31) +#define CTRL_SI (1<<27) +#define CTRL_PE (1<<26) +#define CTRL_EI (1<<25) +#define CTRL_ER (1<<24) +#define CTRL_BUS (0xff<<CTRL_BUS_BIT) +#define CTRL_HOSTINT 0xf + +#define STS_HOST_BIT 31 +#define STS_MST_BIT 30 +#define STS_TAR_BIT 29 +#define STS_DMA_BIT 28 +#define STS_DI_BIT 27 +#define STS_HI_BIT 26 +#define STS_IRQMODE_BIT 24 +#define STS_TRACE_BIT 23 +#define STS_CFGERRVALID_BIT 20 +#define STS_CFGERR_BIT 19 +#define STS_INTTYPE_BIT 12 +#define STS_INTSTS_BIT 8 +#define STS_FDEPTH_BIT 2 +#define STS_FNUM_BIT 0 + +#define STS_HOST (1<<STS_HOST_BIT) +#define STS_MST (1<<STS_MST_BIT) +#define STS_TAR (1<<STS_TAR_BIT) +#define STS_DMA (1<<STS_DMA_BIT) +#define STS_DI (1<<STS_DI_BIT) +#define STS_HI (1<<STS_HI_BIT) +#define STS_IRQMODE (0x3<<STS_IRQMODE_BIT) +#define STS_TRACE (1<<STS_TRACE_BIT) +#define STS_CFGERRVALID (1<<STS_CFGERRVALID_BIT) +#define STS_CFGERR (1<<STS_CFGERR_BIT) +#define STS_INTTYPE (0x3f<<STS_INTTYPE_BIT) +#define STS_INTSTS (0xf<<STS_INTSTS_BIT) +#define STS_FDEPTH (0x7<<STS_FDEPTH_BIT) +#define STS_FNUM (0x3<<STS_FNUM_BIT) + +#define STS_ISYSERR (1<<17) +#define STS_IDMA (1<<16) +#define STS_IDMAERR (1<<15) +#define STS_IMSTABRT (1<<14) +#define STS_ITGTABRT (1<<13) +#define STS_IPARERR (1<<12) + +#define STS_ERR_IRQ (STS_ISYSERR | STS_IMSTABRT | STS_ITGTABRT | STS_IPARERR) + +struct grpci2_bd_chan { + unsigned int ctrl; /* 0x00 DMA Control */ + unsigned int nchan; /* 0x04 Next DMA Channel Address */ + unsigned int nbd; /* 0x08 Next Data Descriptor in chan */ + unsigned int res; /* 0x0C Reserved */ +}; + +#define BD_CHAN_EN 0x80000000 +#define BD_CHAN_TYPE 0x00300000 +#define BD_CHAN_BDCNT 0x0000ffff +#define BD_CHAN_EN_BIT 31 +#define BD_CHAN_TYPE_BIT 20 +#define BD_CHAN_BDCNT_BIT 0 + +struct grpci2_bd_data { + unsigned int ctrl; /* 0x00 DMA Data Control */ + unsigned int pci_adr; /* 0x04 PCI Start Address */ + unsigned int ahb_adr; /* 0x08 AHB Start address */ + unsigned int next; /* 0x0C Next Data Descriptor in chan */ +}; + +#define BD_DATA_EN 0x80000000 +#define BD_DATA_IE 0x40000000 +#define BD_DATA_DR 0x20000000 +#define BD_DATA_TYPE 0x00300000 +#define BD_DATA_ER 0x00080000 +#define BD_DATA_LEN 0x0000ffff +#define BD_DATA_EN_BIT 31 +#define BD_DATA_IE_BIT 30 +#define BD_DATA_DR_BIT 29 +#define BD_DATA_TYPE_BIT 20 +#define BD_DATA_ER_BIT 19 +#define BD_DATA_LEN_BIT 0 + +/* GRPCI2 Capability */ +struct grpci2_cap_first { + unsigned int ctrl; + unsigned int pci2ahb_map[6]; + unsigned int ext2ahb_map; + unsigned int io_map; + unsigned int pcibar_size[6]; +}; +#define CAP9_CTRL_OFS 0 +#define CAP9_BAR_OFS 0x4 +#define CAP9_IOMAP_OFS 0x20 +#define CAP9_BARSIZE_OFS 0x24 + +struct grpci2_priv { + struct leon_pci_info info; /* must be on top of this structure */ + struct grpci2_regs *regs; + char irq; + char irq_mode; /* IRQ Mode from CAPSTS REG */ + char bt_enabled; + char do_reset; + char irq_mask; + u32 pciid; /* PCI ID of Host */ + unsigned char irq_map[4]; + + /* Virtual IRQ numbers */ + unsigned int virq_err; + unsigned int virq_dma; + + /* AHB PCI Windows */ + unsigned long pci_area; /* MEMORY */ + unsigned long pci_area_end; + unsigned long pci_io; /* I/O */ + unsigned long pci_conf; /* CONFIGURATION */ + unsigned long pci_conf_end; + unsigned long pci_io_va; + + struct grpci2_barcfg tgtbars[6]; +}; + +DEFINE_SPINLOCK(grpci2_dev_lock); +struct grpci2_priv *grpci2priv; + +int grpci2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + struct grpci2_priv *priv = dev->bus->sysdata; + int irq_group; + + /* Use default IRQ decoding on PCI BUS0 according slot numbering */ + irq_group = slot & 0x3; + pin = ((pin - 1) + irq_group) & 0x3; + + return priv->irq_map[pin]; +} + +static int grpci2_cfg_r32(struct grpci2_priv *priv, unsigned int bus, + unsigned int devfn, int where, u32 *val) +{ + unsigned int *pci_conf; + unsigned long flags; + u32 tmp; + + if (where & 0x3) + return -EINVAL; + + if (bus == 0 && PCI_SLOT(devfn) != 0) + devfn += (0x8 * 6); + + /* Select bus */ + spin_lock_irqsave(&grpci2_dev_lock, flags); + REGSTORE(priv->regs->ctrl, (REGLOAD(priv->regs->ctrl) & ~(0xff << 16)) | + (bus << 16)); + spin_unlock_irqrestore(&grpci2_dev_lock, flags); + + /* clear old status */ + REGSTORE(priv->regs->sts_cap, (STS_CFGERR | STS_CFGERRVALID)); + + pci_conf = (unsigned int *) (priv->pci_conf | + (devfn << 8) | (where & 0xfc)); + tmp = LEON3_BYPASS_LOAD_PA(pci_conf); + + /* Wait until GRPCI2 signals that CFG access is done, it should be + * done instantaneously unless a DMA operation is ongoing... + */ + while ((REGLOAD(priv->regs->sts_cap) & STS_CFGERRVALID) == 0) + ; + + if (REGLOAD(priv->regs->sts_cap) & STS_CFGERR) { + *val = 0xffffffff; + } else { + /* Bus always little endian (unaffected by byte-swapping) */ + *val = flip_dword(tmp); + } + + return 0; +} + +static int grpci2_cfg_r16(struct grpci2_priv *priv, unsigned int bus, + unsigned int devfn, int where, u32 *val) +{ + u32 v; + int ret; + + if (where & 0x1) + return -EINVAL; + ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v); + *val = 0xffff & (v >> (8 * (where & 0x3))); + return ret; +} + +static int grpci2_cfg_r8(struct grpci2_priv *priv, unsigned int bus, + unsigned int devfn, int where, u32 *val) +{ + u32 v; + int ret; + + ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v); + *val = 0xff & (v >> (8 * (where & 3))); + + return ret; +} + +static int grpci2_cfg_w32(struct grpci2_priv *priv, unsigned int bus, + unsigned int devfn, int where, u32 val) +{ + unsigned int *pci_conf; + unsigned long flags; + + if (where & 0x3) + return -EINVAL; + + if (bus == 0 && PCI_SLOT(devfn) != 0) + devfn += (0x8 * 6); + + /* Select bus */ + spin_lock_irqsave(&grpci2_dev_lock, flags); + REGSTORE(priv->regs->ctrl, (REGLOAD(priv->regs->ctrl) & ~(0xff << 16)) | + (bus << 16)); + spin_unlock_irqrestore(&grpci2_dev_lock, flags); + + /* clear old status */ + REGSTORE(priv->regs->sts_cap, (STS_CFGERR | STS_CFGERRVALID)); + + pci_conf = (unsigned int *) (priv->pci_conf | + (devfn << 8) | (where & 0xfc)); + LEON3_BYPASS_STORE_PA(pci_conf, flip_dword(val)); + + /* Wait until GRPCI2 signals that CFG access is done, it should be + * done instantaneously unless a DMA operation is ongoing... + */ + while ((REGLOAD(priv->regs->sts_cap) & STS_CFGERRVALID) == 0) + ; + + return 0; +} + +static int grpci2_cfg_w16(struct grpci2_priv *priv, unsigned int bus, + unsigned int devfn, int where, u32 val) +{ + int ret; + u32 v; + + if (where & 0x1) + return -EINVAL; + ret = grpci2_cfg_r32(priv, bus, devfn, where&~3, &v); + if (ret) + return ret; + v = (v & ~(0xffff << (8 * (where & 0x3)))) | + ((0xffff & val) << (8 * (where & 0x3))); + return grpci2_cfg_w32(priv, bus, devfn, where & ~0x3, v); +} + +static int grpci2_cfg_w8(struct grpci2_priv *priv, unsigned int bus, + unsigned int devfn, int where, u32 val) +{ + int ret; + u32 v; + + ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v); + if (ret != 0) + return ret; + v = (v & ~(0xff << (8 * (where & 0x3)))) | + ((0xff & val) << (8 * (where & 0x3))); + return grpci2_cfg_w32(priv, bus, devfn, where & ~0x3, v); +} + +/* Read from Configuration Space. When entering here the PCI layer has taken + * the pci_lock spinlock and IRQ is off. + */ +static int grpci2_read_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + struct grpci2_priv *priv = grpci2priv; + unsigned int busno = bus->number; + int ret; + + if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0)) { + *val = ~0; + return 0; + } + + switch (size) { + case 1: + ret = grpci2_cfg_r8(priv, busno, devfn, where, val); + break; + case 2: + ret = grpci2_cfg_r16(priv, busno, devfn, where, val); + break; + case 4: + ret = grpci2_cfg_r32(priv, busno, devfn, where, val); + break; + default: + ret = -EINVAL; + break; + } + +#ifdef GRPCI2_DEBUG_CFGACCESS + printk(KERN_INFO "grpci2_read_config: [%02x:%02x:%x] ofs=%d val=%x " + "size=%d\n", busno, PCI_SLOT(devfn), PCI_FUNC(devfn), where, + *val, size); +#endif + + return ret; +} + +/* Write to Configuration Space. When entering here the PCI layer has taken + * the pci_lock spinlock and IRQ is off. + */ +static int grpci2_write_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + struct grpci2_priv *priv = grpci2priv; + unsigned int busno = bus->number; + + if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0)) + return 0; + +#ifdef GRPCI2_DEBUG_CFGACCESS + printk(KERN_INFO "grpci2_write_config: [%02x:%02x:%x] ofs=%d size=%d " + "val=%x\n", busno, PCI_SLOT(devfn), PCI_FUNC(devfn), + where, size, val); +#endif + + switch (size) { + default: + return -EINVAL; + case 1: + return grpci2_cfg_w8(priv, busno, devfn, where, val); + case 2: + return grpci2_cfg_w16(priv, busno, devfn, where, val); + case 4: + return grpci2_cfg_w32(priv, busno, devfn, where, val); + } +} + +static struct pci_ops grpci2_ops = { + .read = grpci2_read_config, + .write = grpci2_write_config, +}; + +/* GENIRQ IRQ chip implementation for GRPCI2 irqmode=0..2. In configuration + * 3 where all PCI Interrupts has a separate IRQ on the system IRQ controller + * this is not needed and the standard IRQ controller can be used. + */ + +static void grpci2_mask_irq(struct irq_data *data) +{ + unsigned long flags; + unsigned int irqidx; + struct grpci2_priv *priv = grpci2priv; + + irqidx = (unsigned int)data->chip_data - 1; + if (irqidx > 3) /* only mask PCI interrupts here */ + return; + + spin_lock_irqsave(&grpci2_dev_lock, flags); + REGSTORE(priv->regs->ctrl, REGLOAD(priv->regs->ctrl) & ~(1 << irqidx)); + spin_unlock_irqrestore(&grpci2_dev_lock, flags); +} + +static void grpci2_unmask_irq(struct irq_data *data) +{ + unsigned long flags; + unsigned int irqidx; + struct grpci2_priv *priv = grpci2priv; + + irqidx = (unsigned int)data->chip_data - 1; + if (irqidx > 3) /* only unmask PCI interrupts here */ + return; + + spin_lock_irqsave(&grpci2_dev_lock, flags); + REGSTORE(priv->regs->ctrl, REGLOAD(priv->regs->ctrl) | (1 << irqidx)); + spin_unlock_irqrestore(&grpci2_dev_lock, flags); +} + +static unsigned int grpci2_startup_irq(struct irq_data *data) +{ + grpci2_unmask_irq(data); + return 0; +} + +static void grpci2_shutdown_irq(struct irq_data *data) +{ + grpci2_mask_irq(data); +} + +static struct irq_chip grpci2_irq = { + .name = "grpci2", + .irq_startup = grpci2_startup_irq, + .irq_shutdown = grpci2_shutdown_irq, + .irq_mask = grpci2_mask_irq, + .irq_unmask = grpci2_unmask_irq, +}; + +/* Handle one or multiple IRQs from the PCI core */ +static void grpci2_pci_flow_irq(unsigned int irq, struct irq_desc *desc) +{ + struct grpci2_priv *priv = grpci2priv; + int i, ack = 0; + unsigned int ctrl, sts_cap, pci_ints; + + ctrl = REGLOAD(priv->regs->ctrl); + sts_cap = REGLOAD(priv->regs->sts_cap); + + /* Error Interrupt? */ + if (sts_cap & STS_ERR_IRQ) { + generic_handle_irq(priv->virq_err); + ack = 1; + } + + /* PCI Interrupt? */ + pci_ints = ((~sts_cap) >> STS_INTSTS_BIT) & ctrl & CTRL_HOSTINT; + if (pci_ints) { + /* Call respective PCI Interrupt handler */ + for (i = 0; i < 4; i++) { + if (pci_ints & (1 << i)) + generic_handle_irq(priv->irq_map[i]); + } + ack = 1; + } + + /* + * Decode DMA Interrupt only when shared with Err and PCI INTX#, when + * the DMA is a unique IRQ the DMA interrupts doesn't end up here, they + * goes directly to DMA ISR. + */ + if ((priv->irq_mode == 0) && (sts_cap & (STS_IDMA | STS_IDMAERR))) { + generic_handle_irq(priv->virq_dma); + ack = 1; + } + + /* + * Call "first level" IRQ chip end-of-irq handler. It will ACK LEON IRQ + * Controller, this must be done after IRQ sources have been handled to + * avoid double IRQ generation + */ + if (ack) + desc->irq_data.chip->irq_eoi(&desc->irq_data); +} + +/* Create a virtual IRQ */ +static unsigned int grpci2_build_device_irq(unsigned int irq) +{ + unsigned int virq = 0, pil; + + pil = 1 << 8; + virq = irq_alloc(irq, pil); + if (virq == 0) + goto out; + + irq_set_chip_and_handler_name(virq, &grpci2_irq, handle_simple_irq, + "pcilvl"); + irq_set_chip_data(virq, (void *)irq); + +out: + return virq; +} + +void grpci2_hw_init(struct grpci2_priv *priv) +{ + u32 ahbadr, pciadr, bar_sz, capptr, io_map, data; + struct grpci2_regs *regs = priv->regs; + int i; + struct grpci2_barcfg *barcfg = priv->tgtbars; + + /* Reset any earlier setup */ + if (priv->do_reset) { + printk(KERN_INFO "GRPCI2: Resetting PCI bus\n"); + REGSTORE(regs->ctrl, CTRL_RESET); + ssleep(1); /* Wait for boards to settle */ + } + REGSTORE(regs->ctrl, 0); + REGSTORE(regs->sts_cap, ~0); /* Clear Status */ + REGSTORE(regs->dma_ctrl, 0); + REGSTORE(regs->dma_bdbase, 0); + + /* Translate I/O accesses to 0, I/O Space always @ PCI low 64Kbytes */ + REGSTORE(regs->io_map, REGLOAD(regs->io_map) & 0x0000ffff); + + /* set 1:1 mapping between AHB -> PCI memory space, for all Masters + * Each AHB master has it's own mapping registers. Max 16 AHB masters. + */ + for (i = 0; i < 16; i++) + REGSTORE(regs->ahbmst_map[i], priv->pci_area); + + /* Get the GRPCI2 Host PCI ID */ + grpci2_cfg_r32(priv, 0, 0, PCI_VENDOR_ID, &priv->pciid); + + /* Get address to first (always defined) capability structure */ + grpci2_cfg_r8(priv, 0, 0, PCI_CAPABILITY_LIST, &capptr); + + /* Enable/Disable Byte twisting */ + grpci2_cfg_r32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, &io_map); + io_map = (io_map & ~0x1) | (priv->bt_enabled ? 1 : 0); + grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, io_map); + + /* Setup the Host's PCI Target BARs for other peripherals to access, + * and do DMA to the host's memory. The target BARs can be sized and + * enabled individually. + * + * User may set custom target BARs, but default is: + * The first BARs is used to map kernel low (DMA is part of normal + * region on sparc which is SRMMU_MAXMEM big) main memory 1:1 to the + * PCI bus, the other BARs are disabled. We assume that the first BAR + * is always available. + */ + for (i = 0; i < 6; i++) { + if (barcfg[i].pciadr != ~0 && barcfg[i].ahbadr != ~0) { + /* Target BARs must have the proper alignment */ + ahbadr = barcfg[i].ahbadr; + pciadr = barcfg[i].pciadr; + bar_sz = ((pciadr - 1) & ~pciadr) + 1; + } else { + if (i == 0) { + /* Map main memory */ + bar_sz = 0xf0000008; /* 256MB prefetchable */ + ahbadr = 0xf0000000 & (u32)__pa(PAGE_ALIGN( + (unsigned long) &_end)); + pciadr = ahbadr; + } else { + bar_sz = 0; + ahbadr = 0; + pciadr = 0; + } + } + grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BARSIZE_OFS+i*4, bar_sz); + grpci2_cfg_w32(priv, 0, 0, PCI_BASE_ADDRESS_0+i*4, pciadr); + grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BAR_OFS+i*4, ahbadr); + printk(KERN_INFO " TGT BAR[%d]: 0x%08x (PCI)-> 0x%08x\n", + i, pciadr, ahbadr); + } + + /* set as bus master and enable pci memory responses */ + grpci2_cfg_r32(priv, 0, 0, PCI_COMMAND, &data); + data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + grpci2_cfg_w32(priv, 0, 0, PCI_COMMAND, data); + + /* Enable Error respone (CPU-TRAP) on illegal memory access. */ + REGSTORE(regs->ctrl, CTRL_ER | CTRL_PE); +} + +static irqreturn_t grpci2_jump_interrupt(int irq, void *arg) +{ + printk(KERN_ERR "GRPCI2: Jump IRQ happened\n"); + return IRQ_NONE; +} + +/* Handle GRPCI2 Error Interrupt */ +static irqreturn_t grpci2_err_interrupt(int irq, void *arg) +{ + struct grpci2_priv *priv = arg; + struct grpci2_regs *regs = priv->regs; + unsigned int status; + + status = REGLOAD(regs->sts_cap); + if ((status & STS_ERR_IRQ) == 0) + return IRQ_NONE; + + if (status & STS_IPARERR) + printk(KERN_ERR "GRPCI2: Parity Error\n"); + + if (status & STS_ITGTABRT) + printk(KERN_ERR "GRPCI2: Target Abort\n"); + + if (status & STS_IMSTABRT) + printk(KERN_ERR "GRPCI2: Master Abort\n"); + + if (status & STS_ISYSERR) + printk(KERN_ERR "GRPCI2: System Error\n"); + + /* Clear handled INT TYPE IRQs */ + REGSTORE(regs->sts_cap, status & STS_ERR_IRQ); + + return IRQ_HANDLED; +} + +static int __devinit grpci2_of_probe(struct platform_device *ofdev) +{ + struct grpci2_regs *regs; + struct grpci2_priv *priv; + int err, i, len; + const int *tmp; + unsigned int capability; + + if (grpci2priv) { + printk(KERN_ERR "GRPCI2: only one GRPCI2 core supported\n"); + return -ENODEV; + } + + if (ofdev->num_resources < 3) { + printk(KERN_ERR "GRPCI2: not enough APB/AHB resources\n"); + return -EIO; + } + + /* Find Device Address */ + regs = of_ioremap(&ofdev->resource[0], 0, + resource_size(&ofdev->resource[0]), + "grlib-grpci2 regs"); + if (regs == NULL) { + printk(KERN_ERR "GRPCI2: ioremap failed\n"); + return -EIO; + } + + /* + * Check that we're in Host Slot and that we can act as a Host Bridge + * and not only as target. + */ + capability = REGLOAD(regs->sts_cap); + if ((capability & STS_HOST) || !(capability & STS_MST)) { + printk(KERN_INFO "GRPCI2: not in host system slot\n"); + err = -EIO; + goto err1; + } + + priv = grpci2priv = kzalloc(sizeof(struct grpci2_priv), GFP_KERNEL); + if (grpci2priv == NULL) { + err = -ENOMEM; + goto err1; + } + memset(grpci2priv, 0, sizeof(*grpci2priv)); + priv->regs = regs; + priv->irq = ofdev->archdata.irqs[0]; /* BASE IRQ */ + priv->irq_mode = (capability & STS_IRQMODE) >> STS_IRQMODE_BIT; + + printk(KERN_INFO "GRPCI2: host found at %p, irq%d\n", regs, priv->irq); + + /* Byte twisting should be made configurable from kernel command line */ + priv->bt_enabled = 1; + + /* Let user do custom Target BAR assignment */ + tmp = of_get_property(ofdev->dev.of_node, "barcfg", &len); + if (tmp && (len == 2*4*6)) + memcpy(priv->tgtbars, tmp, 2*4*6); + else + memset(priv->tgtbars, -1, 2*4*6); + + /* Limit IRQ unmasking in irq_mode 2 and 3 */ + tmp = of_get_property(ofdev->dev.of_node, "irq_mask", &len); + if (tmp && (len == 4)) + priv->do_reset = *tmp; + else + priv->irq_mask = 0xf; + + /* Optional PCI reset. Force PCI reset on startup */ + tmp = of_get_property(ofdev->dev.of_node, "reset", &len); + if (tmp && (len == 4)) + priv->do_reset = *tmp; + else + priv->do_reset = 0; + + /* Find PCI Memory, I/O and Configuration Space Windows */ + priv->pci_area = ofdev->resource[1].start; + priv->pci_area_end = ofdev->resource[1].end+1; + priv->pci_io = ofdev->resource[2].start; + priv->pci_conf = ofdev->resource[2].start + 0x10000; + priv->pci_conf_end = priv->pci_conf + 0x10000; + priv->pci_io_va = (unsigned long)ioremap(priv->pci_io, 0x10000); + if (!priv->pci_io_va) { + err = -EIO; + goto err2; + } + + printk(KERN_INFO + "GRPCI2: MEMORY SPACE [0x%08lx - 0x%08lx]\n" + " I/O SPACE [0x%08lx - 0x%08lx]\n" + " CONFIG SPACE [0x%08lx - 0x%08lx]\n", + priv->pci_area, priv->pci_area_end-1, + priv->pci_io, priv->pci_conf-1, + priv->pci_conf, priv->pci_conf_end-1); + + /* + * I/O Space resources in I/O Window mapped into Virtual Adr Space + * We never use low 4KB because some devices seem have problems using + * address 0. + */ + memset(&priv->info.io_space, 0, sizeof(struct resource)); + priv->info.io_space.name = "GRPCI2 PCI I/O Space"; + priv->info.io_space.start = priv->pci_io_va + 0x1000; + priv->info.io_space.end = priv->pci_io_va + 0x10000 - 1; + priv->info.io_space.flags = IORESOURCE_IO; + + /* + * GRPCI2 has no prefetchable memory, map everything as + * non-prefetchable memory + */ + memset(&priv->info.mem_space, 0, sizeof(struct resource)); + priv->info.mem_space.name = "GRPCI2 PCI MEM Space"; + priv->info.mem_space.start = priv->pci_area; + priv->info.mem_space.end = priv->pci_area_end - 1; + priv->info.mem_space.flags = IORESOURCE_MEM; + + if (request_resource(&iomem_resource, &priv->info.mem_space) < 0) + goto err3; + if (request_resource(&ioport_resource, &priv->info.io_space) < 0) + goto err4; + + grpci2_hw_init(priv); + + /* + * Get PCI Interrupt to System IRQ mapping and setup IRQ handling + * Error IRQ always on PCI INTA. + */ + if (priv->irq_mode < 2) { + /* All PCI interrupts are shared using the same system IRQ */ + leon_update_virq_handling(priv->irq, grpci2_pci_flow_irq, + "pcilvl", 0); + + priv->irq_map[0] = grpci2_build_device_irq(1); + priv->irq_map[1] = grpci2_build_device_irq(2); + priv->irq_map[2] = grpci2_build_device_irq(3); + priv->irq_map[3] = grpci2_build_device_irq(4); + + priv->virq_err = grpci2_build_device_irq(5); + if (priv->irq_mode & 1) + priv->virq_dma = ofdev->archdata.irqs[1]; + else + priv->virq_dma = grpci2_build_device_irq(6); + + /* Enable IRQs on LEON IRQ controller */ + err = request_irq(priv->irq, grpci2_jump_interrupt, 0, + "GRPCI2_JUMP", priv); + if (err) + printk(KERN_ERR "GRPCI2: ERR IRQ request failed\n"); + } else { + /* All PCI interrupts have an unique IRQ interrupt */ + for (i = 0; i < 4; i++) { + /* Make LEON IRQ layer handle level IRQ by acking */ + leon_update_virq_handling(ofdev->archdata.irqs[i], + handle_fasteoi_irq, "pcilvl", + 1); + priv->irq_map[i] = ofdev->archdata.irqs[i]; + } + priv->virq_err = priv->irq_map[0]; + if (priv->irq_mode & 1) + priv->virq_dma = ofdev->archdata.irqs[4]; + else + priv->virq_dma = priv->irq_map[0]; + + /* Unmask all PCI interrupts, request_irq will not do that */ + REGSTORE(regs->ctrl, REGLOAD(regs->ctrl)|(priv->irq_mask&0xf)); + } + + /* Setup IRQ handler for non-configuration space access errors */ + err = request_irq(priv->virq_err, grpci2_err_interrupt, IRQF_SHARED, + "GRPCI2_ERR", priv); + if (err) { + printk(KERN_DEBUG "GRPCI2: ERR VIRQ request failed: %d\n", err); + goto err5; + } + + /* + * Enable Error Interrupts. PCI interrupts are unmasked once request_irq + * is called by the PCI Device drivers + */ + REGSTORE(regs->ctrl, REGLOAD(regs->ctrl) | CTRL_EI | CTRL_SI); + + /* Init common layer and scan buses */ + priv->info.ops = &grpci2_ops; + priv->info.map_irq = grpci2_map_irq; + leon_pci_init(ofdev, &priv->info); + + return 0; + +err5: + release_resource(&priv->info.io_space); +err4: + release_resource(&priv->info.mem_space); +err3: + err = -ENOMEM; + iounmap((void *)priv->pci_io_va); +err2: + kfree(priv); +err1: + of_iounmap(&ofdev->resource[0], regs, + resource_size(&ofdev->resource[0])); + return err; +} + +static struct of_device_id grpci2_of_match[] = { + { + .name = "GAISLER_GRPCI2", + }, + { + .name = "01_07c", + }, + {}, +}; + +static struct platform_driver grpci2_of_driver = { + .driver = { + .name = "grpci2", + .owner = THIS_MODULE, + .of_match_table = grpci2_of_match, + }, + .probe = grpci2_of_probe, +}; + +static int __init grpci2_init(void) +{ + return platform_driver_register(&grpci2_of_driver); +} + +subsys_initcall(grpci2_init); |