summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-davinci/Kconfig19
-rw-r--r--arch/arm/mach-davinci/Makefile3
-rw-r--r--arch/arm/mach-davinci/board-dm355-evm.c269
-rw-r--r--arch/arm/mach-davinci/board-dm355-leopard.c268
-rw-r--r--arch/arm/mach-davinci/dm355.c540
-rw-r--r--arch/arm/mach-davinci/include/mach/dm355.h23
-rw-r--r--arch/arm/mach-davinci/include/mach/serial.h2
7 files changed, 1123 insertions, 1 deletions
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 0d8ad593a46..1c3ab40e2b6 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -10,6 +10,9 @@ comment "DaVinci Core Type"
config ARCH_DAVINCI_DM644x
bool "DaVinci 644x based system"
+config ARCH_DAVINCI_DM355
+ bool "DaVinci 355 based system"
+
comment "DaVinci Board Type"
config MACH_DAVINCI_EVM
@@ -28,6 +31,22 @@ config MACH_SFFSDR
Say Y here to select the Lyrtech Small Form Factor
Software Defined Radio (SFFSDR) board.
+config MACH_DAVINCI_DM355_EVM
+ bool "TI DM355 EVM"
+ default n
+ depends on ARCH_DAVINCI_DM355
+ help
+ Configure this option to specify the whether the board used
+ for development is a DM355 EVM
+
+config MACH_DM355_LEOPARD
+ bool "DM355 Leopard board"
+ default n
+ depends on ARCH_DAVINCI_DM355
+ help
+ Configure this option to specify the whether the board used
+ for development is a DM355 Leopard board.
+
config DAVINCI_MUX
bool "DAVINCI multiplexing support"
depends on ARCH_DAVINCI
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 2bb6ffa3faa..381c363d98a 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -12,7 +12,10 @@ obj-$(CONFIG_CP_INTC) += cp_intc.o
# Chip specific
obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o
+obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o
# Board specific
obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o
obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o
+obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o
+obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
new file mode 100644
index 00000000000..6af3c6c863a
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -0,0 +1,269 @@
+/*
+ * TI DaVinci EVM board support
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/hardware.h>
+#include <mach/dm355.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/nand.h>
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+
+/* NOTE: this is geared for the standard config, with a socketed
+ * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you
+ * swap chips, maybe with a different block size, partitioning may
+ * need to be changed.
+ */
+#define NAND_BLOCK_SIZE SZ_128K
+
+static struct mtd_partition davinci_nand_partitions[] = {
+ {
+ /* UBL (a few copies) plus U-Boot */
+ .name = "bootloader",
+ .offset = 0,
+ .size = 15 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ /* U-Boot environment */
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 1 * NAND_BLOCK_SIZE,
+ .mask_flags = 0,
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_512M,
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem2",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ }
+ /* two blocks with bad block table (and mirror) at the end */
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+ .mask_chipsel = BIT(14),
+ .parts = davinci_nand_partitions,
+ .nr_parts = ARRAY_SIZE(davinci_nand_partitions),
+ .ecc_mode = NAND_ECC_HW_SYNDROME,
+ .options = NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_nand_resources[] = {
+ {
+ .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+ .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device davinci_nand_device = {
+ .name = "davinci_nand",
+ .id = 0,
+
+ .num_resources = ARRAY_SIZE(davinci_nand_resources),
+ .resource = davinci_nand_resources,
+
+ .dev = {
+ .platform_data = &davinci_nand_data,
+ },
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+ .bus_freq = 400 /* kHz */,
+ .bus_delay = 0 /* usec */,
+};
+
+static int dm355evm_mmc_gpios = -EINVAL;
+
+static void dm355evm_mmcsd_gpios(unsigned gpio)
+{
+ gpio_request(gpio + 0, "mmc0_ro");
+ gpio_request(gpio + 1, "mmc0_cd");
+ gpio_request(gpio + 2, "mmc1_ro");
+ gpio_request(gpio + 3, "mmc1_cd");
+
+ /* we "know" these are input-only so we don't
+ * need to call gpio_direction_input()
+ */
+
+ dm355evm_mmc_gpios = gpio;
+}
+
+static struct i2c_board_info dm355evm_i2c_info[] = {
+ { I2C_BOARD_INFO("dm355evm_msp", 0x25),
+ .platform_data = dm355evm_mmcsd_gpios,
+ /* plus irq */ },
+ /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
+ /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+};
+
+static void __init evm_init_i2c(void)
+{
+ davinci_init_i2c(&i2c_pdata);
+
+ gpio_request(5, "dm355evm_msp");
+ gpio_direction_input(5);
+ dm355evm_i2c_info[0].irq = gpio_to_irq(5);
+
+ i2c_register_board_info(1, dm355evm_i2c_info,
+ ARRAY_SIZE(dm355evm_i2c_info));
+}
+
+static struct resource dm355evm_dm9000_rsrc[] = {
+ {
+ /* addr */
+ .start = 0x04014000,
+ .end = 0x04014001,
+ .flags = IORESOURCE_MEM,
+ }, {
+ /* data */
+ .start = 0x04014002,
+ .end = 0x04014003,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_IRQ
+ | IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
+ },
+};
+
+static struct platform_device dm355evm_dm9000 = {
+ .name = "dm9000",
+ .id = -1,
+ .resource = dm355evm_dm9000_rsrc,
+ .num_resources = ARRAY_SIZE(dm355evm_dm9000_rsrc),
+};
+
+static struct platform_device *davinci_evm_devices[] __initdata = {
+ &dm355evm_dm9000,
+ &davinci_nand_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+ .enabled_uarts = (1 << 0),
+};
+
+static void __init dm355_evm_map_io(void)
+{
+ davinci_map_common_io();
+ dm355_init();
+}
+
+/* Don't connect anything to J10 unless you're only using USB host
+ * mode *and* have to do so with some kind of gender-bender. If
+ * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
+ * the ID pin won't need any help.
+ */
+#ifdef CONFIG_USB_MUSB_PERIPHERAL
+#define USB_ID_VALUE 0 /* ID pulled high; *should* float */
+#else
+#define USB_ID_VALUE 1 /* ID pulled low */
+#endif
+
+static struct spi_eeprom at25640a = {
+ .byte_len = SZ_64K / 8,
+ .name = "at25640a",
+ .page_size = 32,
+ .flags = EE_ADDR2,
+};
+
+static struct spi_board_info dm355_evm_spi_info[] __initconst = {
+ {
+ .modalias = "at25",
+ .platform_data = &at25640a,
+ .max_speed_hz = 10 * 1000 * 1000, /* at 3v3 */
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ },
+};
+
+static __init void dm355_evm_init(void)
+{
+ struct clk *aemif;
+
+ gpio_request(1, "dm9000");
+ gpio_direction_input(1);
+ dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1);
+
+ aemif = clk_get(&dm355evm_dm9000.dev, "aemif");
+ if (IS_ERR(aemif))
+ WARN("%s: unable to get AEMIF clock\n", __func__);
+ else
+ clk_enable(aemif);
+
+ platform_add_devices(davinci_evm_devices,
+ ARRAY_SIZE(davinci_evm_devices));
+ evm_init_i2c();
+ davinci_serial_init(&uart_config);
+
+ /* NOTE: NAND flash timings set by the UBL are slower than
+ * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
+ * but could be 0x0400008c for about 25% faster page reads.
+ */
+
+ gpio_request(2, "usb_id_toggle");
+ gpio_direction_output(2, USB_ID_VALUE);
+ /* irlml6401 switches over 1A in under 8 msec */
+ setup_usb(500, 8);
+
+ dm355_init_spi0(BIT(0), dm355_evm_spi_info,
+ ARRAY_SIZE(dm355_evm_spi_info));
+}
+
+static __init void dm355_evm_irq_init(void)
+{
+ davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
+ .phys_io = IO_PHYS,
+ .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+ .boot_params = (0x80000100),
+ .map_io = dm355_evm_map_io,
+ .init_irq = dm355_evm_irq_init,
+ .timer = &davinci_timer,
+ .init_machine = dm355_evm_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
new file mode 100644
index 00000000000..22f16f38a0b
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -0,0 +1,268 @@
+/*
+ * DM355 leopard board support
+ *
+ * Based on board-dm355-evm.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/hardware.h>
+#include <mach/dm355.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/nand.h>
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+
+/* NOTE: this is geared for the standard config, with a socketed
+ * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you
+ * swap chips, maybe with a different block size, partitioning may
+ * need to be changed.
+ */
+#define NAND_BLOCK_SIZE SZ_128K
+
+static struct mtd_partition davinci_nand_partitions[] = {
+ {
+ /* UBL (a few copies) plus U-Boot */
+ .name = "bootloader",
+ .offset = 0,
+ .size = 15 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ /* U-Boot environment */
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 1 * NAND_BLOCK_SIZE,
+ .mask_flags = 0,
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_512M,
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem2",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ }
+ /* two blocks with bad block table (and mirror) at the end */
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+ .mask_chipsel = BIT(14),
+ .parts = davinci_nand_partitions,
+ .nr_parts = ARRAY_SIZE(davinci_nand_partitions),
+ .ecc_mode = NAND_ECC_HW_SYNDROME,
+ .options = NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_nand_resources[] = {
+ {
+ .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+ .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device davinci_nand_device = {
+ .name = "davinci_nand",
+ .id = 0,
+
+ .num_resources = ARRAY_SIZE(davinci_nand_resources),
+ .resource = davinci_nand_resources,
+
+ .dev = {
+ .platform_data = &davinci_nand_data,
+ },
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+ .bus_freq = 400 /* kHz */,
+ .bus_delay = 0 /* usec */,
+};
+
+static int leopard_mmc_gpio = -EINVAL;
+
+static void dm355leopard_mmcsd_gpios(unsigned gpio)
+{
+ gpio_request(gpio + 0, "mmc0_ro");
+ gpio_request(gpio + 1, "mmc0_cd");
+ gpio_request(gpio + 2, "mmc1_ro");
+ gpio_request(gpio + 3, "mmc1_cd");
+
+ /* we "know" these are input-only so we don't
+ * need to call gpio_direction_input()
+ */
+
+ leopard_mmc_gpio = gpio;
+}
+
+static struct i2c_board_info dm355leopard_i2c_info[] = {
+ { I2C_BOARD_INFO("dm355leopard_msp", 0x25),
+ .platform_data = dm355leopard_mmcsd_gpios,
+ /* plus irq */ },
+ /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
+ /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+};
+
+static void __init leopard_init_i2c(void)
+{
+ davinci_init_i2c(&i2c_pdata);
+
+ gpio_request(5, "dm355leopard_msp");
+ gpio_direction_input(5);
+ dm355leopard_i2c_info[0].irq = gpio_to_irq(5);
+
+ i2c_register_board_info(1, dm355leopard_i2c_info,
+ ARRAY_SIZE(dm355leopard_i2c_info));
+}
+
+static struct resource dm355leopard_dm9000_rsrc[] = {
+ {
+ /* addr */
+ .start = 0x04000000,
+ .end = 0x04000001,
+ .flags = IORESOURCE_MEM,
+ }, {
+ /* data */
+ .start = 0x04000016,
+ .end = 0x04000017,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_IRQ
+ | IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
+ },
+};
+
+static struct platform_device dm355leopard_dm9000 = {
+ .name = "dm9000",
+ .id = -1,
+ .resource = dm355leopard_dm9000_rsrc,
+ .num_resources = ARRAY_SIZE(dm355leopard_dm9000_rsrc),
+};
+
+static struct platform_device *davinci_leopard_devices[] __initdata = {
+ &dm355leopard_dm9000,
+ &davinci_nand_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+ .enabled_uarts = (1 << 0),
+};
+
+static void __init dm355_leopard_map_io(void)
+{
+ davinci_map_common_io();
+ dm355_init();
+}
+
+/* Don't connect anything to J10 unless you're only using USB host
+ * mode *and* have to do so with some kind of gender-bender. If
+ * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
+ * the ID pin won't need any help.
+ */
+#ifdef CONFIG_USB_MUSB_PERIPHERAL
+#define USB_ID_VALUE 0 /* ID pulled high; *should* float */
+#else
+#define USB_ID_VALUE 1 /* ID pulled low */
+#endif
+
+static struct spi_eeprom at25640a = {
+ .byte_len = SZ_64K / 8,
+ .name = "at25640a",
+ .page_size = 32,
+ .flags = EE_ADDR2,
+};
+
+static struct spi_board_info dm355_leopard_spi_info[] __initconst = {
+ {
+ .modalias = "at25",
+ .platform_data = &at25640a,
+ .max_speed_hz = 10 * 1000 * 1000, /* at 3v3 */
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ },
+};
+
+static __init void dm355_leopard_init(void)
+{
+ struct clk *aemif;
+
+ gpio_request(9, "dm9000");
+ gpio_direction_input(9);
+ dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9);
+
+ aemif = clk_get(&dm355leopard_dm9000.dev, "aemif");
+ if (IS_ERR(aemif))
+ WARN("%s: unable to get AEMIF clock\n", __func__);
+ else
+ clk_enable(aemif);
+
+ platform_add_devices(davinci_leopard_devices,
+ ARRAY_SIZE(davinci_leopard_devices));
+ leopard_init_i2c();
+ davinci_serial_init(&uart_config);
+
+ /* NOTE: NAND flash timings set by the UBL are slower than
+ * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
+ * but could be 0x0400008c for about 25% faster page reads.
+ */
+
+ gpio_request(2, "usb_id_toggle");
+ gpio_direction_output(2, USB_ID_VALUE);
+ /* irlml6401 switches over 1A in under 8 msec */
+ setup_usb(500, 8);
+
+ dm355_init_spi0(BIT(0), dm355_leopard_spi_info,
+ ARRAY_SIZE(dm355_leopard_spi_info));
+}
+
+static __init void dm355_leopard_irq_init(void)
+{
+ davinci_irq_init();
+}
+
+MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
+ .phys_io = IO_PHYS,
+ .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+ .boot_params = (0x80000100),
+ .map_io = dm355_leopard_map_io,
+ .init_irq = dm355_leopard_irq_init,
+ .timer = &davinci_timer,
+ .init_machine = dm355_leopard_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
new file mode 100644
index 00000000000..c02115f1eb9
--- /dev/null
+++ b/arch/arm/mach-davinci/dm355.c
@@ -0,0 +1,540 @@
+/*
+ * TI DaVinci DM355 chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/spi/spi.h>
+
+#include <mach/dm355.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+
+#include "clock.h"
+#include "mux.h"
+
+/*
+ * Device specific clocks
+ */
+#define DM355_REF_FREQ 24000000 /* 24 or 36 MHz */
+
+static struct pll_data pll1_data = {
+ .num = 1,
+ .phys_base = DAVINCI_PLL1_BASE,
+ .flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
+};
+
+static struct pll_data pll2_data = {
+ .num = 2,
+ .phys_base = DAVINCI_PLL2_BASE,
+ .flags = PLL_HAS_PREDIV,
+};
+
+static struct clk ref_clk = {
+ .name = "ref_clk",
+ /* FIXME -- crystal rate is board-specific */
+ .rate = DM355_REF_FREQ,
+};
+
+static struct clk pll1_clk = {
+ .name = "pll1",
+ .parent = &ref_clk,
+ .flags = CLK_PLL,
+ .pll_data = &pll1_data,
+};
+
+static struct clk pll1_aux_clk = {
+ .name = "pll1_aux_clk",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+ .name = "pll1_sysclk1",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+ .name = "pll1_sysclk2",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+ .name = "pll1_sysclk3",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+ .name = "pll1_sysclk4",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV4,
+};
+
+static struct clk pll1_sysclkbp = {
+ .name = "pll1_sysclkbp",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+ .div_reg = BPDIV
+};
+
+static struct clk vpss_dac_clk = {
+ .name = "vpss_dac",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM355_LPSC_VPSS_DAC,
+};
+
+static struct clk vpss_master_clk = {
+ .name = "vpss_master",
+ .parent = &pll1_sysclk4,
+ .lpsc = DAVINCI_LPSC_VPSSMSTR,
+ .flags = CLK_PSC,
+};
+
+static struct clk vpss_slave_clk = {
+ .name = "vpss_slave",
+ .parent = &pll1_sysclk4,
+ .lpsc = DAVINCI_LPSC_VPSSSLV,
+};
+
+
+static struct clk clkout1_clk = {
+ .name = "clkout1",
+ .parent = &pll1_aux_clk,
+ /* NOTE: clkout1 can be externally gated by muxing GPIO-18 */
+};
+
+static struct clk clkout2_clk = {
+ .name = "clkout2",
+ .parent = &pll1_sysclkbp,
+};
+
+static struct clk pll2_clk = {
+ .name = "pll2",
+ .parent = &ref_clk,
+ .flags = CLK_PLL,
+ .pll_data = &pll2_data,
+};
+
+static struct clk pll2_sysclk1 = {
+ .name = "pll2_sysclk1",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk pll2_sysclkbp = {
+ .name = "pll2_sysclkbp",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL | PRE_PLL,
+ .div_reg = BPDIV
+};
+
+static struct clk clkout3_clk = {
+ .name = "clkout3",
+ .parent = &pll2_sysclkbp,
+ /* NOTE: clkout3 can be externally gated by muxing GPIO-16 */
+};
+
+static struct clk arm_clk = {
+ .name = "arm_clk",
+ .parent = &pll1_sysclk1,
+ .lpsc = DAVINCI_LPSC_ARM,
+ .flags = ALWAYS_ENABLED,
+};
+
+/*
+ * NOT LISTED below, and not touched by Linux
+ * - in SyncReset state by default
+ * .lpsc = DAVINCI_LPSC_TPCC,
+ * .lpsc = DAVINCI_LPSC_TPTC0,
+ * .lpsc = DAVINCI_LPSC_TPTC1,
+ * .lpsc = DAVINCI_LPSC_DDR_EMIF, .parent = &sysclk2_clk,
+ * .lpsc = DAVINCI_LPSC_MEMSTICK,
+ * - in Enabled state by default
+ * .lpsc = DAVINCI_LPSC_SYSTEM_SUBSYS,
+ * .lpsc = DAVINCI_LPSC_SCR2, // "bus"
+ * .lpsc = DAVINCI_LPSC_SCR3, // "bus"
+ * .lpsc = DAVINCI_LPSC_SCR4, // "bus"
+ * .lpsc = DAVINCI_LPSC_CROSSBAR, // "emulation"
+ * .lpsc = DAVINCI_LPSC_CFG27, // "test"
+ * .lpsc = DAVINCI_LPSC_CFG3, // "test"
+ * .lpsc = DAVINCI_LPSC_CFG5, // "test"
+ */
+
+static struct clk mjcp_clk = {
+ .name = "mjcp",
+ .parent = &pll1_sysclk1,
+ .lpsc = DAVINCI_LPSC_IMCOP,
+};
+
+static struct clk uart0_clk = {
+ .name = "uart0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+ .name = "uart1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+ .name = "uart2",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_UART2,
+};
+
+static struct clk i2c_clk = {
+ .name = "i2c",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_I2C,
+};
+
+static struct clk asp0_clk = {
+ .name = "asp0",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_McBSP,
+};
+
+static struct clk asp1_clk = {
+ .name = "asp1",
+ .parent = &pll1_sysclk2,
+ .lpsc = DM355_LPSC_McBSP1,
+};
+
+static struct clk mmcsd0_clk = {
+ .name = "mmcsd0",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_MMC_SD,
+};
+
+static struct clk mmcsd1_clk = {
+ .name = "mmcsd1",
+ .parent = &pll1_sysclk2,
+ .lpsc = DM355_LPSC_MMC_SD1,
+};
+
+static struct clk spi0_clk = {
+ .name = "spi0",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_SPI,
+};
+
+static struct clk spi1_clk = {
+ .name = "spi1",
+ .parent = &pll1_sysclk2,
+ .lpsc = DM355_LPSC_SPI1,
+};
+
+static struct clk spi2_clk = {
+ .name = "spi2",
+ .parent = &pll1_sysclk2,
+ .lpsc = DM355_LPSC_SPI2,
+};
+
+static struct clk gpio_clk = {
+ .name = "gpio",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_GPIO,
+};
+
+static struct clk aemif_clk = {
+ .name = "aemif",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_AEMIF,
+};
+
+static struct clk pwm0_clk = {
+ .name = "pwm0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM0,
+};
+
+static struct clk pwm1_clk = {
+ .name = "pwm1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM1,
+};
+
+static struct clk pwm2_clk = {
+ .name = "pwm2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM2,
+};
+
+static struct clk pwm3_clk = {
+ .name = "pwm3",
+ .parent = &pll1_aux_clk,
+ .lpsc = DM355_LPSC_PWM3,
+};
+
+static struct clk timer0_clk = {
+ .name = "timer0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+ .name = "timer1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+ .name = "timer2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER2,
+ .usecount = 1, /* REVISIT: why cant' this be disabled? */
+};
+
+static struct clk timer3_clk = {
+ .name = "timer3",
+ .parent = &pll1_aux_clk,
+ .lpsc = DM355_LPSC_TIMER3,
+};
+
+static struct clk rto_clk = {
+ .name = "rto",
+ .parent = &pll1_aux_clk,
+ .lpsc = DM355_LPSC_RTO,
+};
+
+static struct clk usb_clk = {
+ .name = "usb",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_USB,
+};
+
+static struct davinci_clk dm355_clks[] = {
+ CLK(NULL, "ref", &ref_clk),
+ CLK(NULL, "pll1", &pll1_clk),
+ CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
+ CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
+ CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
+ CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
+ CLK(NULL, "pll1_aux", &pll1_aux_clk),
+ CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
+ CLK(NULL, "vpss_dac", &vpss_dac_clk),
+ CLK(NULL, "vpss_master", &vpss_master_clk),
+ CLK(NULL, "vpss_slave", &vpss_slave_clk),
+ CLK(NULL, "clkout1", &clkout1_clk),
+ CLK(NULL, "clkout2", &clkout2_clk),
+ CLK(NULL, "pll2", &pll2_clk),
+ CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+ CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
+ CLK(NULL, "clkout3", &clkout3_clk),
+ CLK(NULL, "arm", &arm_clk),
+ CLK(NULL, "mjcp", &mjcp_clk),
+ CLK(NULL, "uart0", &uart0_clk),
+ CLK(NULL, "uart1", &uart1_clk),
+ CLK(NULL, "uart2", &uart2_clk),
+ CLK("i2c_davinci.1", NULL, &i2c_clk),
+ CLK("soc-audio.0", NULL, &asp0_clk),
+ CLK("soc-audio.1", NULL, &asp1_clk),
+ CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
+ CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
+ CLK(NULL, "spi0", &spi0_clk),
+ CLK(NULL, "spi1", &spi1_clk),
+ CLK(NULL, "spi2", &spi2_clk),
+ CLK(NULL, "gpio", &gpio_clk),
+ CLK(NULL, "aemif", &aemif_clk),
+ CLK(NULL, "pwm0", &pwm0_clk),
+ CLK(NULL, "pwm1", &pwm1_clk),
+ CLK(NULL, "pwm2", &pwm2_clk),
+ CLK(NULL, "pwm3", &pwm3_clk),
+ CLK(NULL, "timer0", &timer0_clk),
+ CLK(NULL, "timer1", &timer1_clk),
+ CLK("watchdog", NULL, &timer2_clk),
+ CLK(NULL, "timer3", &timer3_clk),
+ CLK(NULL, "rto", &rto_clk),
+ CLK(NULL, "usb", &usb_clk),
+ CLK(NULL, NULL, NULL),
+};
+
+/*----------------------------------------------------------------------*/
+
+static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource dm355_spi0_resources[] = {
+ {
+ .start = 0x01c66000,
+ .end = 0x01c667ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_DM355_SPINT0_1,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* Not yet used, so not included:
+ * IORESOURCE_IRQ:
+ * - IRQ_DM355_SPINT0_0
+ * IORESOURCE_DMA:
+ * - DAVINCI_DMA_SPI_SPIX
+ * - DAVINCI_DMA_SPI_SPIR
+ */
+};
+
+static struct platform_device dm355_spi0_device = {
+ .name = "spi_davinci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &dm355_spi0_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(dm355_spi0_resources),
+ .resource = dm355_spi0_resources,
+};
+
+void __init dm355_init_spi0(unsigned chipselect_mask,
+ struct spi_board_info *info, unsigned len)
+{
+ /* for now, assume we need MISO */
+ davinci_cfg_reg(DM355_SPI0_SDI);
+
+ /* not all slaves will be wired up */
+ if (chipselect_mask & BIT(0))
+ davinci_cfg_reg(DM355_SPI0_SDENA0);
+ if (chipselect_mask & BIT(1))
+ davinci_cfg_reg(DM355_SPI0_SDENA1);
+
+ spi_register_board_info(info, len);
+
+ platform_device_register(&dm355_spi0_device);
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Device specific mux setup
+ *
+ * soc description mux mode mode mux dbg
+ * reg offset mask mode
+ */
+static const struct mux_config dm355_pins[] = {
+MUX_CFG(DM355, MMCSD0, 4, 2, 1, 0, false)
+
+MUX_CFG(DM355, SD1_CLK, 3, 6, 1, 1, false)
+MUX_CFG(DM355, SD1_CMD, 3, 7, 1, 1, false)
+MUX_CFG(DM355, SD1_DATA3, 3, 8, 3, 1, false)
+MUX_CFG(DM355, SD1_DATA2, 3, 10, 3, 1, false)
+MUX_CFG(DM355, SD1_DATA1, 3, 12, 3, 1, false)
+MUX_CFG(DM355, SD1_DATA0, 3, 14, 3, 1, false)
+
+MUX_CFG(DM355, I2C_SDA, 3, 19, 1, 1, false)
+MUX_CFG(DM355, I2C_SCL, 3, 20, 1, 1, false)
+
+MUX_CFG(DM355, MCBSP0_BDX, 3, 0, 1, 1, false)
+MUX_CFG(DM355, MCBSP0_X, 3, 1, 1, 1, false)
+MUX_CFG(DM355, MCBSP0_BFSX, 3, 2, 1, 1, false)
+MUX_CFG(DM355, MCBSP0_BDR, 3, 3, 1, 1, false)
+MUX_CFG(DM355, MCBSP0_R, 3, 4, 1, 1, false)
+MUX_CFG(DM355, MCBSP0_BFSR, 3, 5, 1, 1, false)
+
+MUX_CFG(DM355, SPI0_SDI, 4, 1, 1, 0, false)
+MUX_CFG(DM355, SPI0_SDENA0, 4, 0, 1, 0, false)
+MUX_CFG(DM355, SPI0_SDENA1, 3, 28, 1, 1, false)
+
+INT_CFG(DM355, INT_EDMA_CC, 2, 1, 1, false)
+INT_CFG(DM355, INT_EDMA_TC0_ERR, 3, 1, 1, false)
+INT_CFG(DM355, INT_EDMA_TC1_ERR, 4, 1, 1, false)
+
+EVT_CFG(DM355, EVT8_ASP1_TX, 0, 1, 0, false)
+EVT_CFG(DM355, EVT9_ASP1_RX, 1, 1, 0, false)
+EVT_CFG(DM355, EVT26_MMC0_RX, 2, 1, 0, false)
+};
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm355_no_event[] = {
+ 12, 13, 24, 56, 57,
+ 58, 59, 60, 61, 62,
+ 63,
+ -1
+};
+
+static struct edma_soc_info dm355_edma_info = {
+ .n_channel = 64,
+ .n_region = 4,
+ .n_slot = 128,
+ .n_tc = 2,
+ .noevent = dma_chan_dm355_no_event,
+};
+
+static struct resource edma_resources[] = {
+ {
+ .name = "edma_cc",
+ .start = 0x01c00000,
+ .end = 0x01c00000 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc0",
+ .start = 0x01c10000,
+ .end = 0x01c10000 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc1",
+ .start = 0x01c10400,
+ .end = 0x01c10400 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_CCINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_CCERRINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* not using (or muxing) TC*_ERR */
+};
+
+static struct platform_device dm355_edma_device = {
+ .name = "edma",
+ .id = -1,
+ .dev.platform_data = &dm355_edma_info,
+ .num_resources = ARRAY_SIZE(edma_resources),
+ .resource = edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+
+void __init dm355_init(void)
+{
+ davinci_clk_init(dm355_clks);
+ davinci_mux_register(dm355_pins, ARRAY_SIZE(dm355_pins));;
+}
+
+static int __init dm355_init_devices(void)
+{
+ if (!cpu_is_davinci_dm355())
+ return 0;
+
+ davinci_cfg_reg(DM355_INT_EDMA_CC);
+ platform_device_register(&dm355_edma_device);
+ return 0;
+}
+postcore_initcall(dm355_init_devices);
diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h
new file mode 100644
index 00000000000..f7100b65899
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dm355.h
@@ -0,0 +1,23 @@
+/*
+ * Chip specific defines for DM355 SoC
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DM355_H
+#define __ASM_ARCH_DM355_H
+
+#include <mach/hardware.h>
+
+void __init dm355_init(void);
+
+struct spi_board_info;
+
+void dm355_init_spi0(unsigned chipselect_mask,
+ struct spi_board_info *info, unsigned len);
+
+#endif /* __ASM_ARCH_DM355_H */
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 632847d74a1..761ab2b483a 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -18,7 +18,7 @@
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
-#define DM355_UART2_BASE (IO_PHYS + 0x206000)
+#define DM355_UART2_BASE (IO_PHYS + 0x206000)
/* DaVinci UART register offsets */
#define UART_DAVINCI_PWREMU 0x0c
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-26 19:03:30 +0000