diff options
Diffstat (limited to 'arch')
156 files changed, 2396 insertions, 1301 deletions
diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c index 9006063e736..da677f829f7 100644 --- a/arch/alpha/kernel/irq.c +++ b/arch/alpha/kernel/irq.c @@ -151,8 +151,13 @@ handle_irq(int irq, struct pt_regs * regs) } irq_enter(); + /* + * __do_IRQ() must be called with IPL_MAX. Note that we do not + * explicitly enable interrupts afterwards - some MILO PALcode + * (namely LX164 one) seems to have severe problems with RTI + * at IPL 0. + */ local_irq_disable(); __do_IRQ(irq, regs); - local_irq_enable(); irq_exit(); } diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 15dc1a0dffb..32ba00bd0a2 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -78,7 +78,7 @@ menu "System Type" choice prompt "ARM system type" - default ARCH_RPC + default ARCH_VERSATILE config ARCH_CLPS7500 bool "Cirrus-CL-PS7500FE" @@ -799,6 +799,8 @@ source "drivers/i2c/Kconfig" source "drivers/spi/Kconfig" +source "drivers/w1/Kconfig" + source "drivers/hwmon/Kconfig" #source "drivers/l3/Kconfig" diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 159ad7ed7a4..d31b1cb7eea 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -629,6 +629,22 @@ static int locomo_resume(struct platform_device *dev) } #endif + +#define LCM_ALC_EN 0x8000 + +void frontlight_set(struct locomo *lchip, int duty, int vr, int bpwf) +{ + unsigned long flags; + + spin_lock_irqsave(&lchip->lock, flags); + locomo_writel(bpwf, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); + udelay(100); + locomo_writel(duty, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD); + locomo_writel(bpwf | LCM_ALC_EN, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); + spin_unlock_irqrestore(&lchip->lock, flags); +} + + /** * locomo_probe - probe for a single LoCoMo chip. * @phys_addr: physical address of device. @@ -688,6 +704,11 @@ __locomo_probe(struct device *me, struct resource *mem, int irq) /* FrontLight */ locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD); + + /* Same constants can be used for collie and poodle + (depending on CONFIG options in original sharp code)? */ + frontlight_set(lchip, 163, 0, 148); + /* Longtime timer */ locomo_writel(0, lchip->base + LOCOMO_LTINT); /* SPI */ diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 0abbce8c70b..b324dcac1c5 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -57,7 +57,9 @@ int main(void) DEFINE(TI_TP_VALUE, offsetof(struct thread_info, tp_value)); DEFINE(TI_FPSTATE, offsetof(struct thread_info, fpstate)); DEFINE(TI_VFPSTATE, offsetof(struct thread_info, vfpstate)); - DEFINE(TI_IWMMXT_STATE, (offsetof(struct thread_info, fpstate)+4)&~7); +#ifdef CONFIG_IWMMXT + DEFINE(TI_IWMMXT_STATE, offsetof(struct thread_info, fpstate.iwmmxt)); +#endif BLANK(); DEFINE(S_R0, offsetof(struct pt_regs, ARM_r0)); DEFINE(S_R1, offsetof(struct pt_regs, ARM_r1)); diff --git a/arch/arm/kernel/compat.c b/arch/arm/kernel/compat.c index 7195add42e7..60cfa7f3226 100644 --- a/arch/arm/kernel/compat.c +++ b/arch/arm/kernel/compat.c @@ -27,6 +27,8 @@ #include <asm/mach/arch.h> +#include "compat.h" + /* * Usage: * - do not go blindly adding fields, add them at the end diff --git a/arch/arm/kernel/compat.h b/arch/arm/kernel/compat.h new file mode 100644 index 00000000000..27e61a68bd1 --- /dev/null +++ b/arch/arm/kernel/compat.h @@ -0,0 +1,13 @@ +/* + * linux/arch/arm/kernel/compat.h + * + * Copyright (C) 2001 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern void convert_to_tag_list(struct tag *tags); + +extern void squash_mem_tags(struct tag *tag); diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 4b4e4cf79c8..489c069e5c3 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -27,6 +27,7 @@ #include <linux/kallsyms.h> #include <linux/init.h> #include <linux/cpu.h> +#include <linux/elfcore.h> #include <asm/leds.h> #include <asm/processor.h> @@ -83,7 +84,7 @@ EXPORT_SYMBOL(pm_power_off); * This is our default idle handler. We need to disable * interrupts here to ensure we don't miss a wakeup call. */ -void default_idle(void) +static void default_idle(void) { if (hlt_counter) cpu_relax(); diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 7b6256bb590..a1d1b2906e8 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -610,15 +610,12 @@ static int ptrace_setfpregs(struct task_struct *tsk, void __user *ufp) static int ptrace_getwmmxregs(struct task_struct *tsk, void __user *ufp) { struct thread_info *thread = task_thread_info(tsk); - void *ptr = &thread->fpstate; if (!test_ti_thread_flag(thread, TIF_USING_IWMMXT)) return -ENODATA; iwmmxt_task_disable(thread); /* force it to ram */ - /* The iWMMXt state is stored doubleword-aligned. */ - if (((long) ptr) & 4) - ptr += 4; - return copy_to_user(ufp, ptr, 0x98) ? -EFAULT : 0; + return copy_to_user(ufp, &thread->fpstate.iwmmxt, IWMMXT_SIZE) + ? -EFAULT : 0; } /* @@ -627,15 +624,12 @@ static int ptrace_getwmmxregs(struct task_struct *tsk, void __user *ufp) static int ptrace_setwmmxregs(struct task_struct *tsk, void __user *ufp) { struct thread_info *thread = task_thread_info(tsk); - void *ptr = &thread->fpstate; if (!test_ti_thread_flag(thread, TIF_USING_IWMMXT)) return -EACCES; iwmmxt_task_release(thread); /* force a reload */ - /* The iWMMXt state is stored doubleword-aligned. */ - if (((long) ptr) & 4) - ptr += 4; - return copy_from_user(ptr, ufp, 0x98) ? -EFAULT : 0; + return copy_from_user(&thread->fpstate.iwmmxt, ufp, IWMMXT_SIZE) + ? -EFAULT : 0; } #endif diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 68273b4dc88..08974cbe982 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -37,6 +37,8 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> +#include "compat.h" + #ifndef MEM_SIZE #define MEM_SIZE (16*1024*1024) #endif @@ -53,10 +55,7 @@ static int __init fpe_setup(char *line) __setup("fpe=", fpe_setup); #endif -extern unsigned int mem_fclk_21285; extern void paging_init(struct meminfo *, struct machine_desc *desc); -extern void convert_to_tag_list(struct tag *tags); -extern void squash_mem_tags(struct tag *tag); extern void reboot_setup(char *str); extern int root_mountflags; extern void _stext, _text, _etext, __data_start, _edata, _end; diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index d7d932c0286..d6bd435a685 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -422,12 +422,14 @@ static int timer_dyn_tick_disable(void) void timer_dyn_reprogram(void) { struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick; + unsigned long next, seq; - if (dyn_tick) { - write_seqlock(&xtime_lock); - if (dyn_tick->state & DYN_TICK_ENABLED) + if (dyn_tick && (dyn_tick->state & DYN_TICK_ENABLED)) { + next = next_timer_interrupt(); + do { + seq = read_seqbegin(&xtime_lock); dyn_tick->reprogram(next_timer_interrupt() - jiffies); - write_sequnlock(&xtime_lock); + } while (read_seqretry(&xtime_lock, seq)); } } diff --git a/arch/arm/lib/muldi3.S b/arch/arm/lib/muldi3.S index 72d594184b8..d89c6061579 100644 --- a/arch/arm/lib/muldi3.S +++ b/arch/arm/lib/muldi3.S @@ -29,8 +29,8 @@ ENTRY(__aeabi_lmul) mul xh, yl, xh mla xh, xl, yh, xh - mov ip, xl, asr #16 - mov yh, yl, asr #16 + mov ip, xl, lsr #16 + mov yh, yl, lsr #16 bic xl, xl, ip, lsl #16 bic yl, yl, yh, lsl #16 mla xh, yh, ip, xh diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index daadc78e271..5bf50a2a737 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -8,11 +8,9 @@ menu "Intel IXP4xx Implementation Options" comment "IXP4xx Platforms" -# This entry is placed on top because otherwise it would have -# been shown as a submenu. config MACH_NSLU2 bool - prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715) + prompt "Linksys NSLU2" help Say 'Y' here if you want your kernel to support Linksys's NSLU2 NAS device. For more information on this platform, diff --git a/arch/arm/mach-ixp4xx/nas100d-power.c b/arch/arm/mach-ixp4xx/nas100d-power.c index 2bec69bfa71..99d333d7ebd 100644 --- a/arch/arm/mach-ixp4xx/nas100d-power.c +++ b/arch/arm/mach-ixp4xx/nas100d-power.c @@ -56,6 +56,9 @@ static int __init nas100d_power_init(void) static void __exit nas100d_power_exit(void) { + if (!(machine_is_nas100d())) + return; + free_irq(NAS100D_RB_IRQ, NULL); } diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 856d56f3b2a..a3b4c6ac570 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -113,6 +113,9 @@ static void __init nas100d_init(void) { ixp4xx_sys_init(); + /* gpio 14 and 15 are _not_ clocks */ + *IXP4XX_GPIO_GPCLKR = 0; + nas100d_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); nas100d_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c index 0a47d38789a..ca09ba516e4 100644 --- a/arch/arm/mach-s3c2410/devs.c +++ b/arch/arm/mach-s3c2410/devs.c @@ -334,11 +334,17 @@ static struct resource s3c_spi0_resource[] = { }; +static u64 s3c_device_spi0_dmamask = 0xffffffffUL; + struct platform_device s3c_device_spi0 = { .name = "s3c2410-spi", .id = 0, .num_resources = ARRAY_SIZE(s3c_spi0_resource), .resource = s3c_spi0_resource, + .dev = { + .dma_mask = &s3c_device_spi0_dmamask, + .coherent_dma_mask = 0xffffffffUL + } }; EXPORT_SYMBOL(s3c_device_spi0); @@ -359,11 +365,17 @@ static struct resource s3c_spi1_resource[] = { }; +static u64 s3c_device_spi1_dmamask = 0xffffffffUL; + struct platform_device s3c_device_spi1 = { .name = "s3c2410-spi", .id = 1, .num_resources = ARRAY_SIZE(s3c_spi1_resource), .resource = s3c_spi1_resource, + .dev = { + .dma_mask = &s3c_device_spi1_dmamask, + .coherent_dma_mask = 0xffffffffUL + } }; EXPORT_SYMBOL(s3c_device_spi1); diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index d921c1024ae..2c6c2a7c05a 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -96,15 +96,16 @@ ENTRY(v6_coherent_user_range) #ifdef HARVARD_CACHE bic r0, r0, #CACHE_LINE_SIZE - 1 1: mcr p15, 0, r0, c7, c10, 1 @ clean D line - mcr p15, 0, r0, c7, c5, 1 @ invalidate I line add r0, r0, #CACHE_LINE_SIZE cmp r0, r1 blo 1b #endif - mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB -#ifdef HARVARD_CACHE mov r0, #0 +#ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c10, 4 @ drain write buffer + mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate +#else + mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB #endif mov pc, lr diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 330695b6b19..b103e56806b 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -24,14 +24,16 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) { unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT); + const int zero = 0; set_pte(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL)); flush_tlb_kernel_page(to); asm( "mcrr p15, 0, %1, %0, c14\n" - " mcrr p15, 0, %1, %0, c5\n" + " mcr p15, 0, %2, c7, c10, 4\n" + " mcr p15, 0, %2, c7, c5, 0\n" : - : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES) + : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero) : "cc"); } diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S index 6f76b89ef46..fd6adde3909 100644 --- a/arch/arm/mm/tlb-v6.S +++ b/arch/arm/mm/tlb-v6.S @@ -80,6 +80,7 @@ ENTRY(v6wbi_flush_kern_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b + mcr p15, 0, r2, c7, c10, 4 @ data synchronization barrier mov pc, lr .section ".text.init", #alloc, #execinstr diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c index ed79ae20e88..dd344f112cf 100644 --- a/arch/h8300/kernel/process.c +++ b/arch/h8300/kernel/process.c @@ -45,6 +45,9 @@ #include <asm/setup.h> #include <asm/pgtable.h> +void (*pm_power_off)(void) = NULL; +EXPORT_SYMBOL(pm_power_off); + asmlinkage void ret_from_fork(void); /* diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 53bb9a79e27..65656c033d7 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -11,7 +11,7 @@ obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o \ obj-y += cpu/ obj-y += timers/ -obj-$(CONFIG_ACPI) += acpi/ +obj-y += acpi/ obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o obj-$(CONFIG_MCA) += mca.o obj-$(CONFIG_X86_MSR) += msr.o diff --git a/arch/i386/kernel/acpi/Makefile b/arch/i386/kernel/acpi/Makefile index d51c7313cae..7e9ac99354f 100644 --- a/arch/i386/kernel/acpi/Makefile +++ b/arch/i386/kernel/acpi/Makefile @@ -1,4 +1,4 @@ -obj-y := boot.o +obj-$(CONFIG_ACPI) += boot.o obj-$(CONFIG_X86_IO_APIC) += earlyquirk.o obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 8309a7b2cd6..f1a21945963 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -44,6 +44,9 @@ extern void __init clustered_apic_check(void); extern int gsi_irq_sharing(int gsi); #include <asm/proto.h> +static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; } + + #else /* X86 */ #ifdef CONFIG_X86_LOCAL_APIC @@ -1108,9 +1111,6 @@ int __init acpi_boot_table_init(void) disable_acpi(); return error; } -#ifdef __i386__ - check_acpi_pci(); -#endif acpi_table_parse(ACPI_BOOT, acpi_parse_sbf); diff --git a/arch/i386/kernel/acpi/earlyquirk.c b/arch/i386/kernel/acpi/earlyquirk.c index f1b9d2a46da..2e3b643a4dc 100644 --- a/arch/i386/kernel/acpi/earlyquirk.c +++ b/arch/i386/kernel/acpi/earlyquirk.c @@ -7,14 +7,22 @@ #include <linux/pci.h> #include <asm/pci-direct.h> #include <asm/acpi.h> +#include <asm/apic.h> static int __init check_bridge(int vendor, int device) { +#ifdef CONFIG_ACPI /* According to Nvidia all timer overrides are bogus. Just ignore them all. */ if (vendor == PCI_VENDOR_ID_NVIDIA) { acpi_skip_timer_override = 1; } +#endif + if (vendor == PCI_VENDOR_ID_ATI && timer_over_8254 == 1) { + timer_over_8254 = 0; + printk(KERN_INFO "ATI board detected. Disabling timer routing " + "over 8254.\n"); + } return 0; } diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index f39e09ef64e..776c90989e0 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -570,16 +570,18 @@ void __devinit setup_local_APIC(void) */ void lapic_shutdown(void) { + unsigned long flags; + if (!cpu_has_apic) return; - local_irq_disable(); + local_irq_save(flags); clear_local_APIC(); if (enabled_via_apicbase) disable_local_APIC(); - local_irq_enable(); + local_irq_restore(flags); } #ifdef CONFIG_PM diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 4ecd4b326de..e6bd095ae10 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -278,10 +278,10 @@ void __devinit generic_identify(struct cpuinfo_x86 * c) c->x86_capability[4] = excap; c->x86 = (tfms >> 8) & 15; c->x86_model = (tfms >> 4) & 15; - if (c->x86 == 0xf) { + if (c->x86 == 0xf) c->x86 += (tfms >> 20) & 0xff; + if (c->x86 >= 0x6) c->x86_model += ((tfms >> 16) & 0xF) << 4; - } c->x86_mask = tfms & 15; } else { /* Have CPUID level 0 only - unheard of */ diff --git a/arch/i386/kernel/efi.c b/arch/i386/kernel/efi.c index e3e42fd6240..c9cad7ba0d2 100644 --- a/arch/i386/kernel/efi.c +++ b/arch/i386/kernel/efi.c @@ -70,10 +70,13 @@ static void efi_call_phys_prelog(void) { unsigned long cr4; unsigned long temp; + struct Xgt_desc_struct *cpu_gdt_descr; spin_lock(&efi_rt_lock); local_irq_save(efi_rt_eflags); + cpu_gdt_descr = &per_cpu(cpu_gdt_descr, 0); + /* * If I don't have PSE, I should just duplicate two entries in page * directory. If I have PSE, I just need to duplicate one entry in @@ -103,18 +106,17 @@ static void efi_call_phys_prelog(void) */ local_flush_tlb(); - per_cpu(cpu_gdt_descr, 0).address = - __pa(per_cpu(cpu_gdt_descr, 0).address); - load_gdt((struct Xgt_desc_struct *)__pa(&per_cpu(cpu_gdt_descr, 0))); + cpu_gdt_descr->address = __pa(cpu_gdt_descr->address); + load_gdt(cpu_gdt_descr); } static void efi_call_phys_epilog(void) { unsigned long cr4; + struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, 0); - per_cpu(cpu_gdt_descr, 0).address = - (unsigned long)__va(per_cpu(cpu_gdt_descr, 0).address); - load_gdt((struct Xgt_desc_struct *)__va(&per_cpu(cpu_gdt_descr, 0))); + cpu_gdt_descr->address = __va(cpu_gdt_descr->address); + load_gdt(cpu_gdt_descr); cr4 = read_cr4(); diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index 235822b3f41..39d9a5fa907 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -51,6 +51,8 @@ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; static DEFINE_SPINLOCK(ioapic_lock); +int timer_over_8254 __initdata = 1; + /* * Is the SiS APIC rmw bug present ? * -1 = don't know, 0 = no, 1 = yes @@ -2267,7 +2269,8 @@ static inline void check_timer(void) apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); init_8259A(1); timer_ack = 1; - enable_8259A_irq(0); + if (timer_over_8254 > 0) + enable_8259A_irq(0); pin1 = find_isa_irq_pin(0, mp_INT); apic1 = find_isa_irq_apic(0, mp_INT); @@ -2392,6 +2395,20 @@ void __init setup_IO_APIC(void) print_IO_APIC(); } +static int __init setup_disable_8254_timer(char *s) +{ + timer_over_8254 = -1; + return 1; +} +static int __init setup_enable_8254_timer(char *s) +{ + timer_over_8254 = 2; + return 1; +} + +__setup("disable_8254_timer", setup_disable_8254_timer); +__setup("enable_8254_timer", setup_enable_8254_timer); + /* * Called after all the initialization is done. If we didnt find any * APIC bugs then we can allow the modify fast path diff --git a/arch/i386/kernel/machine_kexec.c b/arch/i386/kernel/machine_kexec.c index a912fed4848..f73d7374a2b 100644 --- a/arch/i386/kernel/machine_kexec.c +++ b/arch/i386/kernel/machine_kexec.c @@ -116,13 +116,13 @@ static void load_segments(void) __asm__ __volatile__ ( "\tljmp $"STR(__KERNEL_CS)",$1f\n" "\t1:\n" - "\tmovl $"STR(__KERNEL_DS)",%eax\n" - "\tmovl %eax,%ds\n" - "\tmovl %eax,%es\n" - "\tmovl %eax,%fs\n" - "\tmovl %eax,%gs\n" - "\tmovl %eax,%ss\n" - ); + "\tmovl $"STR(__KERNEL_DS)",%%eax\n" + "\tmovl %%eax,%%ds\n" + "\tmovl %%eax,%%es\n" + "\tmovl %%eax,%%fs\n" + "\tmovl %%eax,%%gs\n" + "\tmovl %%eax,%%ss\n" + ::: "eax", "memory"); #undef STR #undef __STR } diff --git a/arch/i386/kernel/microcode.c b/arch/i386/kernel/microcode.c index d3fdf0057d8..5390b521aca 100644 --- a/arch/i386/kernel/microcode.c +++ b/arch/i386/kernel/microcode.c @@ -74,6 +74,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/sched.h> +#include <linux/cpumask.h> #include <linux/module.h> #include <linux/slab.h> #include <linux/vmalloc.h> @@ -250,8 +251,8 @@ static int find_matching_ucodes (void) error = -EINVAL; goto out; } - - for (cpu_num = 0; cpu_num < num_online_cpus(); cpu_num++) { + + for_each_online_cpu(cpu_num) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/ continue; @@ -293,7 +294,7 @@ static int find_matching_ucodes (void) error = -EFAULT; goto out; } - for (cpu_num = 0; cpu_num < num_online_cpus(); cpu_num++) { + for_each_online_cpu(cpu_num) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/ continue; @@ -304,7 +305,9 @@ static int find_matching_ucodes (void) } } /* now check if any cpu has matched */ - for (cpu_num = 0, allocated_flag = 0, sum = 0; cpu_num < num_online_cpus(); cpu_num++) { + allocated_flag = 0; + sum = 0; + for_each_online_cpu(cpu_num) { if (ucode_cpu_info[cpu_num].err == MC_MARKED) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; if (!allocated_flag) { @@ -415,12 +418,12 @@ static int do_microcode_update (void) } out_free: - for (i = 0; i < num_online_cpus(); i++) { + for_each_online_cpu(i) { if (ucode_cpu_info[i].mc) { int j; void *tmp = ucode_cpu_info[i].mc; vfree(tmp); - for (j = i; j < num_online_cpus(); j++) { + for_each_online_cpu(j) { if (ucode_cpu_info[j].mc == tmp) ucode_cpu_info[j].mc = NULL; } diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index 63f39a7e2c9..be87c5e2ee9 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -357,7 +357,7 @@ static void clear_msr_range(unsigned int base, unsigned int n) wrmsr(base+i, 0, 0); } -static inline void write_watchdog_counter(const char *descr) +static void write_watchdog_counter(const char *descr) { u64 count = (u64)cpu_khz * 1000; @@ -544,7 +544,7 @@ void nmi_watchdog_tick (struct pt_regs * regs) * die_nmi will return ONLY if NOTIFY_STOP happens.. */ die_nmi(regs, "NMI Watchdog detected LOCKUP"); - + } else { last_irq_sums[cpu] = sum; alert_counter[cpu] = 0; } diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 51e513b4f72..ab62a9f4701 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -1599,6 +1599,10 @@ void __init setup_arch(char **cmdline_p) if (efi_enabled) efi_map_memmap(); +#ifdef CONFIG_X86_IO_APIC + check_acpi_pci(); /* Checks more than just ACPI actually */ +#endif + #ifdef CONFIG_ACPI /* * Parse the ACPI tables for possible boot-time SMP configuration. diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index eba7f53f8b4..7007e178379 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -1029,6 +1029,16 @@ int __devinit smp_prepare_cpu(int cpu) int apicid, ret; lock_cpu_hotplug(); + + /* + * On x86, CPU0 is never offlined. Trying to bring up an + * already-booted CPU will hang. So check for that case. + */ + if (cpu_online(cpu)) { + ret = -EINVAL; + goto exit; + } + apicid = x86_cpu_to_apicid[cpu]; if (apicid == BAD_APICID) { ret = -ENODEV; diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c index a14d594bfbe..9d307475985 100644 --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -412,9 +412,9 @@ static int timer_resume(struct sys_device *dev) write_seqlock_irqsave(&xtime_lock, flags); xtime.tv_sec = sec; xtime.tv_nsec = 0; - write_sequnlock_irqrestore(&xtime_lock, flags); - jiffies += sleep_length; + jiffies_64 += sleep_length; wall_jiffies += sleep_length; + write_sequnlock_irqrestore(&xtime_lock, flags); if (last_timer->resume) last_timer->resume(); cur_timer = last_timer; diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index a85ea9d37f0..ff7ae6b664e 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -271,6 +271,25 @@ config SCHED_SMT Intel IA64 chips with MultiThreading at a cost of slightly increased overhead in some places. If unsure say N here. +config PERMIT_BSP_REMOVE + bool "Support removal of Bootstrap Processor" + depends on HOTPLUG_CPU + default n + ---help--- + Say Y here if your platform SAL will support removal of BSP with HOTPLUG_CPU + support. + +config FORCE_CPEI_RETARGET + bool "Force assumption that CPEI can be re-targetted" + depends on PERMIT_BSP_REMOVE + default n + ---help--- + Say Y if you need to force the assumption that CPEI can be re-targetted to + any cpu in the system. This hint is available via ACPI 3.0 specifications. + Tiger4 systems are capable of re-directing CPEI to any CPU other than BSP. + This option it useful to enable this feature on older BIOS's as well. + You can also enable this by using boot command line option force_cpei=1. + config PREEMPT bool "Preemptible Kernel" help diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig index b40672bb3ab..90e9c2e61bf 100644 --- a/arch/ia64/configs/bigsur_defconfig +++ b/arch/ia64/configs/bigsur_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc1 -# Wed Sep 14 15:18:49 2005 +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 16:10:42 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,17 +22,18 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -42,8 +42,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -58,17 +60,36 @@ CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set CONFIG_IA64_DIG=y # CONFIG_IA64_HP_ZX1 is not set @@ -81,18 +102,17 @@ CONFIG_ITANIUM=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +CONFIG_PGTABLE_3=y +# CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_IA64_BRL_EMU=y CONFIG_IA64_L1_CACHE_SHIFT=6 -# CONFIG_NUMA is not set -# CONFIG_VIRTUAL_MEM_MAP is not set # CONFIG_IA64_CYCLONE is not set CONFIG_IOSAPIC=y -# CONFIG_IA64_SGI_SN_XP is not set -CONFIG_FORCE_MAX_ZONEORDER=18 +CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=2 # CONFIG_HOTPLUG_CPU is not set @@ -105,7 +125,12 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_DEC_LOCK=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +# CONFIG_VIRTUAL_MEM_MAP is not set CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y # CONFIG_IA64_MCA_RECOVERY is not set @@ -117,7 +142,6 @@ CONFIG_IA64_PALINFO=y # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y -# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -125,6 +149,7 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y +CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # @@ -137,6 +162,7 @@ CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set @@ -173,6 +199,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -206,6 +233,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -218,14 +250,16 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -286,20 +320,13 @@ CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=m +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=m # @@ -390,6 +417,7 @@ CONFIG_SCSI_SPI_ATTRS=m # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -399,6 +427,7 @@ CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -409,14 +438,7 @@ CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -# CONFIG_SCSI_QLOGIC_1280_1040 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -448,6 +470,7 @@ CONFIG_DM_ZERO=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -486,6 +509,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -524,6 +548,7 @@ CONFIG_EEPRO100=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -630,6 +655,7 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_ACPI=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set @@ -681,6 +707,7 @@ CONFIG_DRM_R128=m # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -731,12 +758,19 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -754,6 +788,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set @@ -775,6 +810,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set @@ -830,6 +866,8 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m # CONFIG_SND_SEQUENCER_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set @@ -837,17 +875,18 @@ CONFIG_SND_PCM_OSS=m # Generic devices # CONFIG_SND_OPL3_LIB=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_AC97_BUS=m # # PCI devices # +# CONFIG_SND_AD1889 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -856,38 +895,38 @@ CONFIG_SND_AC97_BUS=m # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set -# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set CONFIG_SND_CS4281=m +# CONFIG_SND_CS46XX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # USB devices @@ -929,12 +968,15 @@ CONFIG_USB_UHCI_HCD=m # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set -CONFIG_USB_BLUETOOTH_TTY=m CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -946,13 +988,15 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y @@ -972,6 +1016,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1046,7 +1091,7 @@ CONFIG_USB_MON=y # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) # # @@ -1071,6 +1116,7 @@ CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1111,6 +1157,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1153,6 +1200,7 @@ CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_SMB_FS is not set CONFIG_CIFS=m CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y # CONFIG_CIFS_EXPERIMENTAL is not set @@ -1179,6 +1227,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1237,28 +1286,32 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # -# Profiling support +# Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set -# CONFIG_KPROBES is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_IA64_GRANULE_16MB is not set CONFIG_IA64_GRANULE_64MB=y # CONFIG_IA64_PRINT_HAZARDS is not set diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig index 991c07b57c2..744fd2f79f6 100644 --- a/arch/ia64/configs/gensparse_defconfig +++ b/arch/ia64/configs/gensparse_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Wed Sep 28 08:27:29 2005 +# Linux kernel version: 2.6.16-rc5 +# Thu Mar 2 16:39:10 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,18 +22,19 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -43,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -59,17 +61,36 @@ CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_IS_DMA32=y CONFIG_IA64_GENERIC=y # CONFIG_IA64_DIG is not set # CONFIG_IA64_HP_ZX1 is not set @@ -82,6 +103,8 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +CONFIG_PGTABLE_3=y +# CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set @@ -105,6 +128,9 @@ CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_ARCH_FLATMEM_ENABLE=y @@ -117,13 +143,13 @@ CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y +CONFIG_SGI_SN=y # # Firmware Drivers # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y -# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -131,6 +157,7 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y +CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # @@ -145,6 +172,7 @@ CONFIG_ACPI_THERMAL=m CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_CONTAINER=m @@ -187,6 +215,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -221,6 +250,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -233,8 +267,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing @@ -275,7 +312,13 @@ CONFIG_FW_LOADER=m # # Plug and Play support # -# CONFIG_PNP is not set +CONFIG_PNP=y +# CONFIG_PNP_DEBUG is not set + +# +# Protocols +# +CONFIG_PNPACPI=y # # Block devices @@ -295,20 +338,13 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -327,6 +363,7 @@ CONFIG_BLK_DEV_IDESCSI=m # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set # CONFIG_BLK_DEV_OFFBOARD is not set @@ -400,6 +437,7 @@ CONFIG_SCSI_FC_ATTRS=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -409,16 +447,19 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set @@ -436,14 +477,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -# CONFIG_SCSI_QLOGIC_1280_1040 is not set -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -476,6 +510,7 @@ CONFIG_DM_MULTIPATH=m CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_FC=m +# CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_CTL is not set @@ -497,6 +532,7 @@ CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_NET_SB1000 is not set # # ARCnet devices @@ -515,6 +551,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -564,6 +601,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -668,12 +706,15 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set @@ -689,6 +730,7 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_ACPI=y CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set @@ -738,10 +780,10 @@ CONFIG_DRM_SIS=m # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set CONFIG_RAW_DRIVER=m +CONFIG_MAX_RAW_DEVS=256 CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y -CONFIG_MAX_RAW_DEVS=256 # CONFIG_HANGCHECK_TIMER is not set CONFIG_MMTIMER=y @@ -749,6 +791,7 @@ CONFIG_MMTIMER=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -756,6 +799,12 @@ CONFIG_MMTIMER=y # CONFIG_I2C is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -765,6 +814,7 @@ CONFIG_MMTIMER=y # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -815,26 +865,28 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set -CONFIG_SND_GENERIC_DRIVER=y # # Generic devices # CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_AC97_BUS=m # # PCI devices # +# CONFIG_SND_AD1889 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -843,40 +895,40 @@ CONFIG_SND_AC97_BUS=m # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +CONFIG_SND_CS4281=m CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y -CONFIG_SND_CS4281=m CONFIG_SND_EMU10K1=m # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set CONFIG_SND_FM801=m # CONFIG_SND_FM801_TEA575X is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # USB devices @@ -922,12 +974,15 @@ CONFIG_USB_UHCI_HCD=m # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -939,12 +994,15 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set @@ -964,6 +1022,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1043,6 +1102,7 @@ CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND_SRP is not set # # SN Devices @@ -1051,6 +1111,10 @@ CONFIG_SGI_IOC4=y CONFIG_SGI_IOC3=y # +# EDAC - error detection and reporting (RAS) +# + +# # File systems # CONFIG_EXT2_FS=y @@ -1079,6 +1143,7 @@ CONFIG_XFS_EXPORT=y # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1120,6 +1185,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1189,6 +1255,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1254,26 +1321,30 @@ CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_HP_SIMSCSI is not set # -# Profiling support +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=20 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set -# CONFIG_KPROBES is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set # CONFIG_IA64_PRINT_HAZARDS is not set diff --git a/arch/ia64/configs/sim_defconfig b/arch/ia64/configs/sim_defconfig index a26781cfe8b..d9146c31ea1 100644 --- a/arch/ia64/configs/sim_defconfig +++ b/arch/ia64/configs/sim_defconfig @@ -1,39 +1,52 @@ # # Automatically generated make config: don't edit +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 16:13:41 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -# CONFIG_STANDALONE is not set -CONFIG_BROKEN=y -CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_HOTPLUG is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -43,21 +56,45 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y +CONFIG_GENERIC_IOMAP=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set # CONFIG_IA64_DIG is not set # CONFIG_IA64_HP_ZX1 is not set +# CONFIG_IA64_HP_ZX1_SWIOTLB is not set # CONFIG_IA64_SGI_SN2 is not set CONFIG_IA64_HP_SIM=y # CONFIG_ITANIUM is not set @@ -66,17 +103,36 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set # CONFIG_IA64_PAGE_SIZE_16KB is not set CONFIG_IA64_PAGE_SIZE_64KB=y +CONFIG_PGTABLE_3=y +# CONFIG_PGTABLE_4 is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 CONFIG_IA64_L1_CACHE_SHIFT=7 -# CONFIG_MCKINLEY_ASTEP_SPECIFIC is not set -# CONFIG_VIRTUAL_MEM_MAP is not set # CONFIG_IA64_CYCLONE is not set -CONFIG_FORCE_MAX_ZONEORDER=18 +CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=64 +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_SCHED_SMT is not set CONFIG_PREEMPT=y -CONFIG_HAVE_DEC_LOCK=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +# CONFIG_VIRTUAL_MEM_MAP is not set CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y +# CONFIG_IA64_MCA_RECOVERY is not set # CONFIG_PERFMON is not set CONFIG_IA64_PALINFO=m @@ -84,7 +140,6 @@ CONFIG_IA64_PALINFO=m # Firmware Drivers # CONFIG_EFI_VARS=y -# CONFIG_SMBIOS is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y @@ -93,15 +148,98 @@ CONFIG_BINFMT_MISC=y # # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +# CONFIG_UNIX is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # # # Generic Driver Options # +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -118,12 +256,16 @@ CONFIG_BINFMT_MISC=y # # Block devices # +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -133,6 +275,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -144,6 +287,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -157,13 +301,14 @@ CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # -# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_DEBUG is not set # @@ -174,77 +319,47 @@ CONFIG_SCSI_SPI_ATTRS=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # # I2O device support # # -# Networking support +# Network device support # -CONFIG_NET=y +# CONFIG_NETDEVICES is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set # -# Networking options +# PHY device support # -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -# CONFIG_UNIX is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set # -# SCTP Configuration (EXPERIMENTAL) +# Ethernet (10 or 100Mbit) # -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set +# CONFIG_NET_ETHERNET is not set # -# QoS and/or fair queueing +# Ethernet (1000 Mbit) # -# CONFIG_NET_SCHED is not set # -# Network testing +# Ethernet (10000 Mbit) # -# CONFIG_NET_PKTGEN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_NETDEVICES is not set # # ISDN subsystem @@ -274,16 +389,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -293,6 +398,15 @@ CONFIG_SERIO_SERPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -310,7 +424,6 @@ CONFIG_HW_CONSOLE=y # CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set -# CONFIG_QIC02_TAPE is not set # # IPMI @@ -324,15 +437,19 @@ CONFIG_UNIX98_PTYS=y CONFIG_EFI_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # -# CONFIG_FTAPE is not set # CONFIG_AGP is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -340,10 +457,33 @@ CONFIG_EFI_RTC=y # CONFIG_I2C is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -362,7 +502,6 @@ CONFIG_EFI_RTC=y # Console display driver support # # CONFIG_VGA_CONSOLE is not set -# CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # @@ -373,6 +512,12 @@ CONFIG_DUMMY_CONSOLE=y # # USB support # +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# # # USB Gadget Support @@ -380,22 +525,41 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_GADGET is not set # +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -406,7 +570,8 @@ CONFIG_JBD=y # # DOS/FAT/NT Filesystems # -# CONFIG_FAT_FS is not set +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # @@ -415,12 +580,12 @@ CONFIG_JBD=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_TMPFS is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -448,18 +613,22 @@ CONFIG_NFS_FS=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set # CONFIG_NFSD_TCP is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -476,10 +645,10 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set -# CONFIG_NEC98_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -490,8 +659,13 @@ CONFIG_EFI_PARTITION=y # # Library routines # +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y # # HP Simulator drivers @@ -502,33 +676,50 @@ CONFIG_HP_SIMSERIAL_CONSOLE=y CONFIG_HP_SIMSCSI=y # -# Profiling support +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking # -# CONFIG_IA64_GRANULE_16MB is not set -CONFIG_IA64_GRANULE_64MB=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_IA64_PRINT_HAZARDS is not set -# CONFIG_DISABLE_VHPT is not set +# CONFIG_PRINTK_TIME is not set # CONFIG_MAGIC_SYSRQ is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_IA64_GRANULE_16MB is not set +CONFIG_IA64_GRANULE_64MB=y +# CONFIG_IA64_PRINT_HAZARDS is not set +# CONFIG_DISABLE_VHPT is not set # CONFIG_IA64_DEBUG_CMPXCHG is not set # CONFIG_IA64_DEBUG_IRQ is not set -CONFIG_DEBUG_INFO=y CONFIG_SYSVIPC_COMPAT=y # # Security options # +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # # CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index 3cb503b659e..8206752161b 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc4 -# Fri Dec 2 10:33:48 2005 +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 16:06:38 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,17 +22,18 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_CPUSETS=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -42,8 +42,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -88,7 +90,7 @@ CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_IA64_UNCACHED_ALLOCATOR=y -CONFIG_ZONE_DMA_IS_DMA32=y +CONFIG_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set # CONFIG_IA64_DIG is not set # CONFIG_IA64_HP_ZX1 is not set @@ -126,6 +128,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_ARCH_FLATMEM_ENABLE=y @@ -140,6 +143,7 @@ CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y +CONFIG_SGI_SN=y # # Firmware Drivers @@ -166,6 +170,7 @@ CONFIG_ACPI=y CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set @@ -207,6 +212,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -247,6 +253,11 @@ CONFIG_IPV6=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -330,6 +341,7 @@ CONFIG_ATA_OVER_ETH=m # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -457,13 +469,7 @@ CONFIG_SCSI_SATA_VITESSE=y # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -CONFIG_SCSI_QLA22XX=y -CONFIG_SCSI_QLA2300=y -CONFIG_SCSI_QLA2322=y -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -545,6 +551,7 @@ CONFIG_NETDEVICES=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set @@ -632,12 +639,15 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set @@ -686,8 +696,8 @@ CONFIG_AGP=y CONFIG_AGP_SGI_TIOCA=y # CONFIG_DRM is not set CONFIG_RAW_DRIVER=m -# CONFIG_HPET is not set CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set CONFIG_MMTIMER=y @@ -703,6 +713,12 @@ CONFIG_MMTIMER=y # CONFIG_I2C is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -791,12 +807,14 @@ CONFIG_USB_UHCI_HCD=m # may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set @@ -816,6 +834,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -903,6 +922,10 @@ CONFIG_SGI_IOC4=y CONFIG_SGI_IOC3=y # +# EDAC - error detection and reporting (RAS) +# + +# # File systems # CONFIG_EXT2_FS=y @@ -931,6 +954,7 @@ CONFIG_XFS_QUOTA=y # CONFIG_XFS_SECURITY is not set CONFIG_XFS_POSIX_ACL=y CONFIG_XFS_RT=y +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -973,6 +997,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1041,6 +1066,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1111,19 +1137,21 @@ CONFIG_GENERIC_PENDING_IRQ=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=20 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index 6859119bc9d..766bf495543 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc4 -# Fri Dec 2 16:06:32 2005 +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 15:49:18 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,18 +22,19 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -43,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -88,7 +90,7 @@ CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ZONE_DMA_IS_DMA32=y +CONFIG_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set CONFIG_IA64_DIG=y # CONFIG_IA64_HP_ZX1 is not set @@ -114,6 +116,8 @@ CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=4 CONFIG_HOTPLUG_CPU=y +CONFIG_PERMIT_BSP_REMOVE=y +CONFIG_FORCE_CPEI_RETARGET=y # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -162,6 +166,7 @@ CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=m CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_CONTAINER=m @@ -203,6 +208,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -237,6 +243,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -326,6 +337,7 @@ CONFIG_BLK_DEV_INITRD=y # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -443,13 +455,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_QLOGIC_FC=y # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set CONFIG_SCSI_QLOGIC_1280=y -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -572,6 +578,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -676,12 +683,15 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set @@ -694,6 +704,7 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_ACPI=y CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set @@ -738,10 +749,10 @@ CONFIG_DRM_SIS=m # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set CONFIG_RAW_DRIVER=m +CONFIG_MAX_RAW_DEVS=256 CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y -CONFIG_MAX_RAW_DEVS=256 # CONFIG_HANGCHECK_TIMER is not set # @@ -756,6 +767,12 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_I2C is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -765,6 +782,7 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -854,12 +872,15 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set @@ -873,6 +894,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -948,7 +970,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) # # @@ -980,6 +1002,7 @@ CONFIG_XFS_EXPORT=y # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1021,6 +1044,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1090,6 +1114,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1157,18 +1182,20 @@ CONFIG_GENERIC_PENDING_IRQ=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=20 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig index 53899dc8eb5..949dc4670a0 100644 --- a/arch/ia64/configs/zx1_defconfig +++ b/arch/ia64/configs/zx1_defconfig @@ -1,16 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc1 -# Wed Sep 14 15:15:01 2005 +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 15:55:36 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -CONFIG_BROKEN=y -CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -26,17 +23,18 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -45,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -59,17 +59,36 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_KMOD is not set # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set # CONFIG_IA64_DIG is not set CONFIG_IA64_HP_ZX1=y @@ -82,18 +101,16 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +CONFIG_PGTABLE_3=y +# CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_IA64_L1_CACHE_SHIFT=7 -# CONFIG_NUMA is not set -CONFIG_VIRTUAL_MEM_MAP=y -CONFIG_HOLES_IN_ZONE=y # CONFIG_IA64_CYCLONE is not set CONFIG_IOSAPIC=y -# CONFIG_IA64_SGI_SN_XP is not set -CONFIG_FORCE_MAX_ZONEORDER=18 +CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=16 # CONFIG_HOTPLUG_CPU is not set @@ -106,7 +123,14 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_DEC_LOCK=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_VIRTUAL_MEM_MAP=y +CONFIG_HOLES_IN_ZONE=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y @@ -118,7 +142,6 @@ CONFIG_IA64_PALINFO=y # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y -# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y @@ -126,6 +149,7 @@ CONFIG_BINFMT_MISC=y # Power management and ACPI # CONFIG_PM=y +CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # @@ -138,6 +162,7 @@ CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set @@ -179,6 +204,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -211,14 +237,17 @@ CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set # +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set + +# # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set # CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -CONFIG_IP_NF_ARPTABLES=y -# CONFIG_IP_NF_ARPFILTER is not set -# CONFIG_IP_NF_ARP_MANGLE is not set # # DCCP Configuration (EXPERIMENTAL) @@ -229,6 +258,11 @@ CONFIG_IP_NF_ARPTABLES=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -241,14 +275,16 @@ CONFIG_IP_NF_ARPTABLES=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -310,20 +346,13 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -407,13 +436,14 @@ CONFIG_SCSI_LOGGING=y # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -421,13 +451,11 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_ADVANSYS is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set @@ -438,17 +466,9 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -# CONFIG_SCSI_QLOGIC_1280_1040 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -465,6 +485,7 @@ CONFIG_SCSI_QLA2XXX=y CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_FC=y +# CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m @@ -505,6 +526,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -555,6 +577,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -652,6 +675,7 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_ACPI=y CONFIG_SERIAL_8250_NR_UARTS=8 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set @@ -703,6 +727,7 @@ CONFIG_DRM_RADEON=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -753,12 +778,19 @@ CONFIG_I2C_ALGOPCF=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -789,6 +821,7 @@ CONFIG_VIDEO_DEV=y # # Video Adapters # +# CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_BT848 is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_SAA5246A is not set @@ -796,14 +829,16 @@ CONFIG_VIDEO_DEV=y # CONFIG_TUNER_3036 is not set # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set -# CONFIG_VIDEO_ZR36120 is not set # CONFIG_VIDEO_SAA7134 is not set # CONFIG_VIDEO_MXB is not set # CONFIG_VIDEO_DPC is not set # CONFIG_VIDEO_HEXIUM_ORION is not set # CONFIG_VIDEO_HEXIUM_GEMINI is not set # CONFIG_VIDEO_CX88 is not set +# CONFIG_VIDEO_EM28XX is not set # CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_VIDEO_AUDIO_DECODER is not set +# CONFIG_VIDEO_DECODER is not set # # Radio Adapters @@ -824,7 +859,6 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set @@ -833,6 +867,7 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set @@ -848,10 +883,7 @@ CONFIG_FB_RADEON_DEBUG=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -860,6 +892,7 @@ CONFIG_FB_RADEON_DEBUG=y CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -892,6 +925,8 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set @@ -900,17 +935,18 @@ CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_MPU401_UART=y CONFIG_SND_OPL3_LIB=y +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_AC97_BUS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set -CONFIG_SND_AC97_CODEC=y -CONFIG_SND_AC97_BUS=y # # PCI devices # +# CONFIG_SND_AD1889 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -919,39 +955,39 @@ CONFIG_SND_AC97_BUS=y # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set -# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set CONFIG_SND_FM801=y CONFIG_SND_FM801_TEA575X=y +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # USB devices @@ -997,12 +1033,15 @@ CONFIG_USB_UHCI_HCD=y # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1014,13 +1053,15 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set @@ -1034,6 +1075,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1049,6 +1091,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_DABUSB is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_DSBR is not set +# CONFIG_USB_ET61X251 is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_KONICAWC is not set # CONFIG_USB_OV511 is not set @@ -1113,7 +1156,7 @@ CONFIG_USB_MON=y # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) # # @@ -1135,6 +1178,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_INOTIFY is not set @@ -1174,6 +1218,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1238,6 +1283,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1296,26 +1342,30 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # -# Profiling support +# Instrumentation Support # # CONFIG_PROFILING is not set +CONFIG_KPROBES=y # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set -CONFIG_KPROBES=y +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set CONFIG_IA64_PRINT_HAZARDS=y diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index dcbc78a4cfa..3e767288a74 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc1 -# Wed Sep 14 15:13:03 2005 +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 16:02:28 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,18 +22,19 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -43,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -59,17 +61,36 @@ CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_IS_DMA32=y CONFIG_IA64_GENERIC=y # CONFIG_IA64_DIG is not set # CONFIG_IA64_HP_ZX1 is not set @@ -89,14 +110,10 @@ CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_IA64_L1_CACHE_SHIFT=7 -CONFIG_NUMA=y -CONFIG_VIRTUAL_MEM_MAP=y -CONFIG_HOLES_IN_ZONE=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_IA64_CYCLONE=y CONFIG_IOSAPIC=y # CONFIG_IA64_SGI_SN_XP is not set -CONFIG_FORCE_MAX_ZONEORDER=18 +CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=512 CONFIG_HOTPLUG_CPU=y @@ -110,19 +127,29 @@ CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_DEC_LOCK=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_NUMA=y +CONFIG_VIRTUAL_MEM_MAP=y +CONFIG_HOLES_IN_ZONE=y +CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y +CONFIG_SGI_SN=y # # Firmware Drivers # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y -# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -130,6 +157,7 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y +CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # @@ -144,6 +172,7 @@ CONFIG_ACPI_THERMAL=m CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_CONTAINER=m @@ -186,6 +215,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -220,6 +250,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -232,14 +267,16 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -301,20 +338,13 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -407,6 +437,7 @@ CONFIG_SCSI_FC_ATTRS=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -416,16 +447,19 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set @@ -443,14 +477,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -# CONFIG_SCSI_QLOGIC_1280_1040 is not set -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -483,6 +510,7 @@ CONFIG_DM_MULTIPATH=m CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_FC=m +# CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_CTL is not set @@ -523,6 +551,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -572,6 +601,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -676,12 +706,15 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set @@ -697,6 +730,7 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_ACPI=y CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set @@ -710,6 +744,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_SGI_L1_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_SGI_IOC4=y +# CONFIG_SERIAL_SGI_IOC3 is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -745,10 +780,10 @@ CONFIG_DRM_SIS=m # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set CONFIG_RAW_DRIVER=m +CONFIG_MAX_RAW_DEVS=256 CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y -CONFIG_MAX_RAW_DEVS=256 # CONFIG_HANGCHECK_TIMER is not set CONFIG_MMTIMER=y @@ -756,6 +791,7 @@ CONFIG_MMTIMER=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -763,6 +799,12 @@ CONFIG_MMTIMER=y # CONFIG_I2C is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -772,6 +814,7 @@ CONFIG_MMTIMER=y # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -822,26 +865,28 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set -CONFIG_SND_GENERIC_DRIVER=y # # Generic devices # CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_AC97_BUS=m # # PCI devices # +# CONFIG_SND_AD1889 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -850,40 +895,40 @@ CONFIG_SND_AC97_BUS=m # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +CONFIG_SND_CS4281=m CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y -CONFIG_SND_CS4281=m CONFIG_SND_EMU10K1=m # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set CONFIG_SND_FM801=m # CONFIG_SND_FM801_TEA575X is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # USB devices @@ -929,12 +974,15 @@ CONFIG_USB_UHCI_HCD=m # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -946,12 +994,15 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set @@ -971,6 +1022,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1050,11 +1102,17 @@ CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND_SRP is not set # # SN Devices # CONFIG_SGI_IOC4=y +CONFIG_SGI_IOC3=m + +# +# EDAC - error detection and reporting (RAS) +# # # File systems @@ -1085,6 +1143,7 @@ CONFIG_XFS_EXPORT=y # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1126,6 +1185,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1195,6 +1255,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1260,26 +1321,30 @@ CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_HP_SIMSCSI is not set # -# Profiling support +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=20 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set -# CONFIG_KPROBES is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set # CONFIG_IA64_PRINT_HAZARDS is not set diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index ecd44bdc839..4722ec51c70 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -284,19 +284,24 @@ acpi_parse_plat_int_src(acpi_table_entry_header * header, return 0; } +#ifdef CONFIG_HOTPLUG_CPU unsigned int can_cpei_retarget(void) { extern int cpe_vector; + extern unsigned int force_cpei_retarget; /* * Only if CPEI is supported and the override flag * is present, otherwise return that its re-targettable * if we are in polling mode. */ - if (cpe_vector > 0 && !acpi_cpei_override) - return 0; - else - return 1; + if (cpe_vector > 0) { + if (acpi_cpei_override || force_cpei_retarget) + return 1; + else + return 0; + } + return 1; } unsigned int is_cpu_cpei_target(unsigned int cpu) @@ -315,6 +320,7 @@ void set_cpei_target_cpu(unsigned int cpu) { acpi_cpei_phys_cpuid = cpu_physical_id(cpu); } +#endif unsigned int get_cpei_target_cpu(void) { diff --git a/arch/ia64/kernel/cyclone.c b/arch/ia64/kernel/cyclone.c index 6ade3790ce0..e00b21514f7 100644 --- a/arch/ia64/kernel/cyclone.c +++ b/arch/ia64/kernel/cyclone.c @@ -36,7 +36,7 @@ int __init init_cyclone_clock(void) u32* volatile cyclone_timer; /* Cyclone MPMC0 register */ if (!use_cyclone) - return -ENODEV; + return 0; printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n"); diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 930fdfca6dd..0e3eda99e54 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1102,9 +1102,6 @@ skip_rbs_switch: st8 [r2]=r8 st8 [r3]=r10 .work_pending: - tbit.nz p6,p0=r31,TIF_SIGDELAYED // signal delayed from MCA/INIT/NMI/PMI context? -(p6) br.cond.sptk.few .sigdelayed - ;; tbit.z p6,p0=r31,TIF_NEED_RESCHED // current_thread_info()->need_resched==0? (p6) br.cond.sptk.few .notify #ifdef CONFIG_PREEMPT @@ -1131,17 +1128,6 @@ skip_rbs_switch: (pLvSys)br.cond.sptk.few .work_pending_syscall_end br.cond.sptk.many .work_processed_kernel // don't re-check -// There is a delayed signal that was detected in MCA/INIT/NMI/PMI context where -// it could not be delivered. Deliver it now. The signal might be for us and -// may set TIF_SIGPENDING, so redrive ia64_leave_* after processing the delayed -// signal. - -.sigdelayed: - br.call.sptk.many rp=do_sigdelayed - cmp.eq p6,p0=r0,r0 // p6 <- 1, always re-check -(pLvSys)br.cond.sptk.few .work_pending_syscall_end - br.cond.sptk.many .work_processed_kernel // re-check - .work_pending_syscall_end: adds r2=PT(R8)+16,r12 adds r3=PT(R10)+16,r12 diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S index ac6055c8311..7a05b1cb2ad 100644 --- a/arch/ia64/kernel/fsys.S +++ b/arch/ia64/kernel/fsys.S @@ -878,8 +878,7 @@ fsyscall_table: data8 0 // timer_delete data8 0 // clock_settime data8 fsys_clock_gettime // clock_gettime - #define __NR_syscall_last 1255 - .space 8*(NR_syscalls + 1024 - __NR_syscall_last), 0 - - .org fsyscall_table + 8*NR_syscalls // guard against failures to increase NR_syscalls + // fill in zeros for the remaining entries + .zero: + .space fsyscall_table + 8*NR_syscalls - .zero, 0 diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 574084f343f..8832c553230 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -631,6 +631,7 @@ get_target_cpu (unsigned int gsi, int vector) { #ifdef CONFIG_SMP static int cpu = -1; + extern int cpe_vector; /* * In case of vector shared by multiple RTEs, all RTEs that @@ -653,6 +654,11 @@ get_target_cpu (unsigned int gsi, int vector) if (!cpu_online(smp_processor_id())) return cpu_physical_id(smp_processor_id()); +#ifdef CONFIG_ACPI + if (cpe_vector > 0 && vector == IA64_CPEP_VECTOR) + return get_cpei_target_cpu(); +#endif + #ifdef CONFIG_NUMA { int num_cpus, cpu_index, iosapic_index, numa_cpu, i = 0; diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c index d33244c3275..5ce908ef9c9 100644 --- a/arch/ia64/kernel/irq.c +++ b/arch/ia64/kernel/irq.c @@ -163,8 +163,19 @@ void fixup_irqs(void) { unsigned int irq; extern void ia64_process_pending_intr(void); + extern void ia64_disable_timer(void); + extern volatile int time_keeper_id; + + ia64_disable_timer(); + + /* + * Find a new timesync master + */ + if (smp_processor_id() == time_keeper_id) { + time_keeper_id = first_cpu(cpu_online_map); + printk ("CPU %d is now promoted to time-keeper master\n", time_keeper_id); + } - ia64_set_itv(1<<16); /* * Phase 1: Locate irq's bound to this cpu and * relocate them for cpu removal. diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S index 301f2e9d262..dcd906fe574 100644 --- a/arch/ia64/kernel/ivt.S +++ b/arch/ia64/kernel/ivt.S @@ -561,11 +561,12 @@ ENTRY(dirty_bit) ;; // avoid RAW on r18 mov ar.ccv=r18 // set compare value for cmpxchg or r25=_PAGE_D|_PAGE_A,r18 // set the dirty and accessed bits + tbit.z p7,p6 = r18,_PAGE_P_BIT // Check present bit ;; - cmpxchg8.acq r26=[r17],r25,ar.ccv +(p6) cmpxchg8.acq r26=[r17],r25,ar.ccv // Only update if page is present mov r24=PAGE_SHIFT<<2 ;; - cmp.eq p6,p7=r26,r18 +(p6) cmp.eq p6,p7=r26,r18 // Only compare if page is present ;; (p6) itc.d r25 // install updated PTE ;; @@ -626,11 +627,12 @@ ENTRY(iaccess_bit) ;; mov ar.ccv=r18 // set compare value for cmpxchg or r25=_PAGE_A,r18 // set the accessed bit + tbit.z p7,p6 = r18,_PAGE_P_BIT // Check present bit ;; - cmpxchg8.acq r26=[r17],r25,ar.ccv +(p6) cmpxchg8.acq r26=[r17],r25,ar.ccv // Only if page present mov r24=PAGE_SHIFT<<2 ;; - cmp.eq p6,p7=r26,r18 +(p6) cmp.eq p6,p7=r26,r18 // Only if page present ;; (p6) itc.i r25 // install updated PTE ;; @@ -680,11 +682,12 @@ ENTRY(daccess_bit) ;; // avoid RAW on r18 mov ar.ccv=r18 // set compare value for cmpxchg or r25=_PAGE_A,r18 // set the dirty bit + tbit.z p7,p6 = r18,_PAGE_P_BIT // Check present bit ;; - cmpxchg8.acq r26=[r17],r25,ar.ccv +(p6) cmpxchg8.acq r26=[r17],r25,ar.ccv // Only if page is present mov r24=PAGE_SHIFT<<2 ;; - cmp.eq p6,p7=r26,r18 +(p6) cmp.eq p6,p7=r26,r18 // Only if page is present ;; (p6) itc.d r25 // install updated PTE /* @@ -1362,7 +1365,6 @@ END(debug_vector) // 0x5a00 Entry 30 (size 16 bundles) Unaligned Reference (57) ENTRY(unaligned_access) DBG_FAULT(30) - mov r16=cr.ipsr mov r31=pr // prepare to save predicates ;; br.sptk.many dispatch_unaligned_handler diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index ee7eec9ee57..b57e723f194 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -281,14 +281,10 @@ ia64_mca_log_sal_error_record(int sal_info_type) ia64_sal_clear_state_info(sal_info_type); } -/* - * platform dependent error handling - */ -#ifndef PLATFORM_MCA_HANDLERS - #ifdef CONFIG_ACPI int cpe_vector = -1; +int ia64_cpe_irq = -1; static irqreturn_t ia64_mca_cpe_int_handler (int cpe_irq, void *arg, struct pt_regs *ptregs) @@ -377,8 +373,6 @@ ia64_mca_register_cpev (int cpev) } #endif /* CONFIG_ACPI */ -#endif /* PLATFORM_MCA_HANDLERS */ - /* * ia64_mca_cmc_vector_setup * @@ -630,6 +624,32 @@ copy_reg(const u64 *fr, u64 fnat, u64 *tr, u64 *tnat) *tnat |= (nat << tslot); } +/* Change the comm field on the MCA/INT task to include the pid that + * was interrupted, it makes for easier debugging. If that pid was 0 + * (swapper or nested MCA/INIT) then use the start of the previous comm + * field suffixed with its cpu. + */ + +static void +ia64_mca_modify_comm(const task_t *previous_current) +{ + char *p, comm[sizeof(current->comm)]; + if (previous_current->pid) + snprintf(comm, sizeof(comm), "%s %d", + current->comm, previous_current->pid); + else { + int l; + if ((p = strchr(previous_current->comm, ' '))) + l = p - previous_current->comm; + else + l = strlen(previous_current->comm); + snprintf(comm, sizeof(comm), "%s %*s %d", + current->comm, l, previous_current->comm, + task_thread_info(previous_current)->cpu); + } + memcpy(current->comm, comm, sizeof(current->comm)); +} + /* On entry to this routine, we are running on the per cpu stack, see * mca_asm.h. The original stack has not been touched by this event. Some of * the original stack's registers will be in the RBS on this stack. This stack @@ -648,7 +668,7 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, struct ia64_sal_os_state *sos, const char *type) { - char *p, comm[sizeof(current->comm)]; + char *p; ia64_va va; extern char ia64_leave_kernel[]; /* Need asm address, not function descriptor */ const pal_min_state_area_t *ms = sos->pal_min_state; @@ -721,6 +741,10 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, /* Verify the previous stack state before we change it */ if (user_mode(regs)) { msg = "occurred in user space"; + /* previous_current is guaranteed to be valid when the task was + * in user space, so ... + */ + ia64_mca_modify_comm(previous_current); goto no_mod; } if (r13 != sos->prev_IA64_KR_CURRENT) { @@ -750,25 +774,7 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, goto no_mod; } - /* Change the comm field on the MCA/INT task to include the pid that - * was interrupted, it makes for easier debugging. If that pid was 0 - * (swapper or nested MCA/INIT) then use the start of the previous comm - * field suffixed with its cpu. - */ - if (previous_current->pid) - snprintf(comm, sizeof(comm), "%s %d", - current->comm, previous_current->pid); - else { - int l; - if ((p = strchr(previous_current->comm, ' '))) - l = p - previous_current->comm; - else - l = strlen(previous_current->comm); - snprintf(comm, sizeof(comm), "%s %*s %d", - current->comm, l, previous_current->comm, - task_thread_info(previous_current)->cpu); - } - memcpy(current->comm, comm, sizeof(current->comm)); + ia64_mca_modify_comm(previous_current); /* Make the original task look blocked. First stack a struct pt_regs, * describing the state at the time of interrupt. mca_asm.S built a @@ -908,7 +914,7 @@ no_mod: static void ia64_wait_for_slaves(int monarch) { - int c, wait = 0; + int c, wait = 0, missing = 0; for_each_online_cpu(c) { if (c == monarch) continue; @@ -919,15 +925,32 @@ ia64_wait_for_slaves(int monarch) } } if (!wait) - return; + goto all_in; for_each_online_cpu(c) { if (c == monarch) continue; if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE) { udelay(5*1000000); /* wait 5 seconds for slaves (arbitrary) */ + if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE) + missing = 1; break; } } + if (!missing) + goto all_in; + printk(KERN_INFO "OS MCA slave did not rendezvous on cpu"); + for_each_online_cpu(c) { + if (c == monarch) + continue; + if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE) + printk(" %d", c); + } + printk("\n"); + return; + +all_in: + printk(KERN_INFO "All OS MCA slaves have reached rendezvous\n"); + return; } /* @@ -953,6 +976,10 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, task_t *previous_current; oops_in_progress = 1; /* FIXME: make printk NMI/MCA/INIT safe */ + console_loglevel = 15; /* make sure printks make it to console */ + printk(KERN_INFO "Entered OS MCA handler. PSP=%lx cpu=%d monarch=%ld\n", + sos->proc_state_param, cpu, sos->monarch); + previous_current = ia64_mca_modify_original_stack(regs, sw, sos, "MCA"); monarch_cpu = cpu; if (notify_die(DIE_MCA_MONARCH_ENTER, "MCA", regs, 0, 0, 0) @@ -1444,11 +1471,13 @@ void __devinit ia64_mca_cpu_init(void *cpu_data) { void *pal_vaddr; + static int first_time = 1; - if (smp_processor_id() == 0) { + if (first_time) { void *mca_data; int cpu; + first_time = 0; mca_data = alloc_bootmem(sizeof(struct ia64_mca_cpu) * NR_CPUS + KERNEL_STACK_SIZE); mca_data = (void *)(((unsigned long)mca_data + @@ -1704,6 +1733,7 @@ ia64_mca_late_init(void) desc = irq_descp(irq); desc->status |= IRQ_PER_CPU; setup_irq(irq, &mca_cpe_irqaction); + ia64_cpe_irq = irq; } ia64_mca_register_cpev(cpe_vector); IA64_MCA_DEBUG("%s: CPEI/P setup and enabled.\n", __FUNCTION__); diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c index 8fd93afa75a..e883d85906d 100644 --- a/arch/ia64/kernel/mca_drv.c +++ b/arch/ia64/kernel/mca_drv.c @@ -123,8 +123,9 @@ mca_page_isolate(unsigned long paddr) void mca_handler_bh(unsigned long paddr) { - printk(KERN_DEBUG "OS_MCA: process [pid: %d](%s) encounters MCA.\n", - current->pid, current->comm); + printk(KERN_ERR + "OS_MCA: process [pid: %d](%s) encounters MCA (paddr=%lx)\n", + current->pid, current->comm, paddr); spin_lock(&mca_bh_lock); switch (mca_page_isolate(paddr)) { @@ -132,7 +133,7 @@ mca_handler_bh(unsigned long paddr) printk(KERN_DEBUG "Page isolation: ( %lx ) success.\n", paddr); break; case ISOLATE_NG: - printk(KERN_DEBUG "Page isolation: ( %lx ) failure.\n", paddr); + printk(KERN_CRIT "Page isolation: ( %lx ) failure.\n", paddr); break; default: break; @@ -567,10 +568,15 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, return 0; /* - * If there is no bus error, record is weird but we need not to recover. + * The cache check and bus check bits have four possible states + * cc bc + * 0 0 Weird record, not recovered + * 1 0 Cache error, not recovered + * 0 1 I/O error, attempt recovery + * 1 1 Memory error, attempt recovery */ if (psp->bc == 0 || pbci == NULL) - return 1; + return 0; /* * Sorry, we cannot handle so many. diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 9c5194b385d..077f21216b6 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -6722,6 +6722,7 @@ __initcall(pfm_init); void pfm_init_percpu (void) { + static int first_time=1; /* * make sure no measurement is active * (may inherit programmed PMCs from EFI). @@ -6734,8 +6735,10 @@ pfm_init_percpu (void) */ pfm_unfreeze_pmu(); - if (smp_processor_id() == 0) + if (first_time) { register_percpu_irq(IA64_PERFMON_VECTOR, &perfmon_irqaction); + first_time=0; + } ia64_setreg(_IA64_REG_CR_PMV, IA64_PERFMON_VECTOR); ia64_srlz_d(); diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c index 463f6bb44d0..1d7903ee212 100644 --- a/arch/ia64/kernel/signal.c +++ b/arch/ia64/kernel/signal.c @@ -588,104 +588,3 @@ ia64_do_signal (sigset_t *oldset, struct sigscratch *scr, long in_syscall) } return 0; } - -/* Set a delayed signal that was detected in MCA/INIT/NMI/PMI context where it - * could not be delivered. It is important that the target process is not - * allowed to do any more work in user space. Possible cases for the target - * process: - * - * - It is sleeping and will wake up soon. Store the data in the current task, - * the signal will be sent when the current task returns from the next - * interrupt. - * - * - It is running in user context. Store the data in the current task, the - * signal will be sent when the current task returns from the next interrupt. - * - * - It is running in kernel context on this or another cpu and will return to - * user context. Store the data in the target task, the signal will be sent - * to itself when the target task returns to user space. - * - * - It is running in kernel context on this cpu and will sleep before - * returning to user context. Because this is also the current task, the - * signal will not get delivered and the task could sleep indefinitely. - * Store the data in the idle task for this cpu, the signal will be sent - * after the idle task processes its next interrupt. - * - * To cover all cases, store the data in the target task, the current task and - * the idle task on this cpu. Whatever happens, the signal will be delivered - * to the target task before it can do any useful user space work. Multiple - * deliveries have no unwanted side effects. - * - * Note: This code is executed in MCA/INIT/NMI/PMI context, with interrupts - * disabled. It must not take any locks nor use kernel structures or services - * that require locks. - */ - -/* To ensure that we get the right pid, check its start time. To avoid extra - * include files in thread_info.h, convert the task start_time to unsigned long, - * giving us a cycle time of > 580 years. - */ -static inline unsigned long -start_time_ul(const struct task_struct *t) -{ - return t->start_time.tv_sec * NSEC_PER_SEC + t->start_time.tv_nsec; -} - -void -set_sigdelayed(pid_t pid, int signo, int code, void __user *addr) -{ - struct task_struct *t; - unsigned long start_time = 0; - int i; - - for (i = 1; i <= 3; ++i) { - switch (i) { - case 1: - t = find_task_by_pid(pid); - if (t) - start_time = start_time_ul(t); - break; - case 2: - t = current; - break; - default: - t = idle_task(smp_processor_id()); - break; - } - - if (!t) - return; - task_thread_info(t)->sigdelayed.signo = signo; - task_thread_info(t)->sigdelayed.code = code; - task_thread_info(t)->sigdelayed.addr = addr; - task_thread_info(t)->sigdelayed.start_time = start_time; - task_thread_info(t)->sigdelayed.pid = pid; - wmb(); - set_tsk_thread_flag(t, TIF_SIGDELAYED); - } -} - -/* Called from entry.S when it detects TIF_SIGDELAYED, a delayed signal that - * was detected in MCA/INIT/NMI/PMI context where it could not be delivered. - */ - -void -do_sigdelayed(void) -{ - struct siginfo siginfo; - pid_t pid; - struct task_struct *t; - - clear_thread_flag(TIF_SIGDELAYED); - memset(&siginfo, 0, sizeof(siginfo)); - siginfo.si_signo = current_thread_info()->sigdelayed.signo; - siginfo.si_code = current_thread_info()->sigdelayed.code; - siginfo.si_addr = current_thread_info()->sigdelayed.addr; - pid = current_thread_info()->sigdelayed.pid; - t = find_task_by_pid(pid); - if (!t) - return; - if (current_thread_info()->sigdelayed.start_time != start_time_ul(t)) - return; - force_sig_info(siginfo.si_signo, &siginfo, t); -} diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index b681ef34a86..c4b633b36da 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -70,6 +70,12 @@ #endif #ifdef CONFIG_HOTPLUG_CPU +#ifdef CONFIG_PERMIT_BSP_REMOVE +#define bsp_remove_ok 1 +#else +#define bsp_remove_ok 0 +#endif + /* * Store all idle threads, this can be reused instead of creating * a new thread. Also avoids complicated thread destroy functionality @@ -104,7 +110,7 @@ struct sal_to_os_boot *sal_state_for_booting_cpu = &sal_boot_rendez_state[0]; /* * ITC synchronization related stuff: */ -#define MASTER 0 +#define MASTER (0) #define SLAVE (SMP_CACHE_BYTES/8) #define NUM_ROUNDS 64 /* magic value */ @@ -151,6 +157,27 @@ char __initdata no_int_routing; unsigned char smp_int_redirect; /* are INT and IPI redirectable by the chipset? */ +#ifdef CONFIG_FORCE_CPEI_RETARGET +#define CPEI_OVERRIDE_DEFAULT (1) +#else +#define CPEI_OVERRIDE_DEFAULT (0) +#endif + +unsigned int force_cpei_retarget = CPEI_OVERRIDE_DEFAULT; + +static int __init +cmdl_force_cpei(char *str) +{ + int value=0; + + get_option (&str, &value); + force_cpei_retarget = value; + + return 1; +} + +__setup("force_cpei=", cmdl_force_cpei); + static int __init nointroute (char *str) { @@ -161,6 +188,27 @@ nointroute (char *str) __setup("nointroute", nointroute); +static void fix_b0_for_bsp(void) +{ +#ifdef CONFIG_HOTPLUG_CPU + int cpuid; + static int fix_bsp_b0 = 1; + + cpuid = smp_processor_id(); + + /* + * Cache the b0 value on the first AP that comes up + */ + if (!(fix_bsp_b0 && cpuid)) + return; + + sal_boot_rendez_state[0].br[0] = sal_boot_rendez_state[cpuid].br[0]; + printk ("Fixed BSP b0 value from CPU %d\n", cpuid); + + fix_bsp_b0 = 0; +#endif +} + void sync_master (void *arg) { @@ -327,8 +375,9 @@ smp_setup_percpu_timer (void) static void __devinit smp_callin (void) { - int cpuid, phys_id; + int cpuid, phys_id, itc_master; extern void ia64_init_itm(void); + extern volatile int time_keeper_id; #ifdef CONFIG_PERFMON extern void pfm_init_percpu(void); @@ -336,6 +385,7 @@ smp_callin (void) cpuid = smp_processor_id(); phys_id = hard_smp_processor_id(); + itc_master = time_keeper_id; if (cpu_online(cpuid)) { printk(KERN_ERR "huh, phys CPU#0x%x, CPU#0x%x already present??\n", @@ -343,6 +393,8 @@ smp_callin (void) BUG(); } + fix_b0_for_bsp(); + lock_ipi_calllock(); cpu_set(cpuid, cpu_online_map); unlock_ipi_calllock(); @@ -365,8 +417,8 @@ smp_callin (void) * calls spin_unlock_bh(), which calls spin_unlock_bh(), which calls * local_bh_enable(), which bugs out if irqs are not enabled... */ - Dprintk("Going to syncup ITC with BP.\n"); - ia64_sync_itc(0); + Dprintk("Going to syncup ITC with ITC Master.\n"); + ia64_sync_itc(itc_master); } /* @@ -635,6 +687,47 @@ remove_siblinginfo(int cpu) } extern void fixup_irqs(void); + +int migrate_platform_irqs(unsigned int cpu) +{ + int new_cpei_cpu; + irq_desc_t *desc = NULL; + cpumask_t mask; + int retval = 0; + + /* + * dont permit CPEI target to removed. + */ + if (cpe_vector > 0 && is_cpu_cpei_target(cpu)) { + printk ("CPU (%d) is CPEI Target\n", cpu); + if (can_cpei_retarget()) { + /* + * Now re-target the CPEI to a different processor + */ + new_cpei_cpu = any_online_cpu(cpu_online_map); + mask = cpumask_of_cpu(new_cpei_cpu); + set_cpei_target_cpu(new_cpei_cpu); + desc = irq_descp(ia64_cpe_irq); + /* + * Switch for now, immediatly, we need to do fake intr + * as other interrupts, but need to study CPEI behaviour with + * polling before making changes. + */ + if (desc) { + desc->handler->disable(ia64_cpe_irq); + desc->handler->set_affinity(ia64_cpe_irq, mask); + desc->handler->enable(ia64_cpe_irq); + printk ("Re-targetting CPEI to cpu %d\n", new_cpei_cpu); + } + } + if (!desc) { + printk ("Unable to retarget CPEI, offline cpu [%d] failed\n", cpu); + retval = -EBUSY; + } + } + return retval; +} + /* must be called with cpucontrol mutex held */ int __cpu_disable(void) { @@ -643,8 +736,17 @@ int __cpu_disable(void) /* * dont permit boot processor for now */ - if (cpu == 0) - return -EBUSY; + if (cpu == 0 && !bsp_remove_ok) { + printk ("Your platform does not support removal of BSP\n"); + return (-EBUSY); + } + + cpu_clear(cpu, cpu_online_map); + + if (migrate_platform_irqs(cpu)) { + cpu_set(cpu, cpu_online_map); + return (-EBUSY); + } remove_siblinginfo(cpu); cpu_clear(cpu, cpu_online_map); diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c index 307d01e15b2..ac167436e93 100644 --- a/arch/ia64/kernel/time.c +++ b/arch/ia64/kernel/time.c @@ -32,7 +32,7 @@ extern unsigned long wall_jiffies; -#define TIME_KEEPER_ID 0 /* smp_processor_id() of time-keeper */ +volatile int time_keeper_id = 0; /* smp_processor_id() of time-keeper */ #ifdef CONFIG_IA64_DEBUG_IRQ @@ -71,7 +71,7 @@ timer_interrupt (int irq, void *dev_id, struct pt_regs *regs) new_itm += local_cpu_data->itm_delta; - if (smp_processor_id() == TIME_KEEPER_ID) { + if (smp_processor_id() == time_keeper_id) { /* * Here we are in the timer irq handler. We have irqs locally * disabled, but we don't know if the timer_bh is running on @@ -236,6 +236,11 @@ static struct irqaction timer_irqaction = { .name = "timer" }; +void __devinit ia64_disable_timer(void) +{ + ia64_set_itv(1 << 16); +} + void __init time_init (void) { diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index 6e5eea19fa6..3b6fd798c4d 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -36,7 +36,7 @@ int arch_register_cpu(int num) parent = &sysfs_nodes[cpu_to_node(num)]; #endif /* CONFIG_NUMA */ -#ifdef CONFIG_ACPI +#if defined (CONFIG_ACPI) && defined (CONFIG_HOTPLUG_CPU) /* * If CPEI cannot be re-targetted, and this is * CPEI target, then dont create the control file diff --git a/arch/ia64/kernel/unaligned.c b/arch/ia64/kernel/unaligned.c index f9e0ae936d1..1e357550c77 100644 --- a/arch/ia64/kernel/unaligned.c +++ b/arch/ia64/kernel/unaligned.c @@ -24,7 +24,7 @@ #include <asm/uaccess.h> #include <asm/unaligned.h> -extern void die_if_kernel(char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn)); +extern void die_if_kernel(char *str, struct pt_regs *regs, long err); #undef DEBUG_UNALIGNED_TRAP @@ -53,6 +53,15 @@ dump (const char *str, void *vp, size_t len) #define SIGN_EXT9 0xffffffffffffff00ul /* + * sysctl settable hook which tells the kernel whether to honor the + * IA64_THREAD_UAC_NOPRINT prctl. Because this is user settable, we want + * to allow the super user to enable/disable this for security reasons + * (i.e. don't allow attacker to fill up logs with unaligned accesses). + */ +int no_unaligned_warning; +static int noprint_warning; + +/* * For M-unit: * * opcode | m | x6 | @@ -1324,8 +1333,9 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs) if ((current->thread.flags & IA64_THREAD_UAC_SIGBUS) != 0) goto force_sigbus; - if (!(current->thread.flags & IA64_THREAD_UAC_NOPRINT) - && within_logging_rate_limit()) + if (!no_unaligned_warning && + !(current->thread.flags & IA64_THREAD_UAC_NOPRINT) && + within_logging_rate_limit()) { char buf[200]; /* comm[] is at most 16 bytes... */ size_t len; @@ -1340,7 +1350,22 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs) if (user_mode(regs)) tty_write_message(current->signal->tty, buf); buf[len-1] = '\0'; /* drop '\r' */ - printk(KERN_WARNING "%s", buf); /* watch for command names containing %s */ + /* watch for command names containing %s */ + printk(KERN_WARNING "%s", buf); + } else { + if (no_unaligned_warning && !noprint_warning) { + noprint_warning = 1; + printk(KERN_WARNING "%s(%d) encountered an " + "unaligned exception which required\n" + "kernel assistance, which degrades " + "the performance of the application.\n" + "Unaligned exception warnings have " + "been disabled by the system " + "administrator\n" + "echo 0 > /proc/sys/kernel/ignore-" + "unaligned-usertrap to re-enable\n", + current->comm, current->pid); + } } } else { if (within_logging_rate_limit()) diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index acaaec4e468..9855ba31809 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -181,13 +181,15 @@ per_cpu_init (void) { void *cpu_data; int cpu; + static int first_time=1; /* * get_free_pages() cannot be used before cpu_init() done. BSP * allocates "NR_CPUS" pages for all CPUs to avoid that AP calls * get_zeroed_page(). */ - if (smp_processor_id() == 0) { + if (first_time) { + first_time=0; cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS, PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS)); for (cpu = 0; cpu < NR_CPUS; cpu++) { diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index c87d6d1d581..573d5cc63e2 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -528,12 +528,17 @@ void __init find_memory(void) void *per_cpu_init(void) { int cpu; + static int first_time = 1; + if (smp_processor_id() != 0) return __per_cpu_start + __per_cpu_offset[smp_processor_id()]; - for (cpu = 0; cpu < NR_CPUS; cpu++) - per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu]; + if (first_time) { + first_time = 0; + for (cpu = 0; cpu < NR_CPUS; cpu++) + per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu]; + } return __per_cpu_start + __per_cpu_offset[smp_processor_id()]; } diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 0b30ca00628..9ba32b2d96d 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -579,7 +579,7 @@ pcibios_align_resource (void *data, struct resource *res, char * __init pcibios_setup (char *str) { - return NULL; + return str; } int diff --git a/arch/ia64/sn/kernel/Makefile b/arch/ia64/sn/kernel/Makefile index 3e9b4eea741..ab9c48c8801 100644 --- a/arch/ia64/sn/kernel/Makefile +++ b/arch/ia64/sn/kernel/Makefile @@ -10,7 +10,8 @@ CPPFLAGS += -I$(srctree)/arch/ia64/sn/include obj-y += setup.o bte.o bte_error.o irq.o mca.o idle.o \ - huberror.o io_init.o iomv.o klconflib.o sn2/ + huberror.o io_init.o iomv.o klconflib.o pio_phys.o \ + sn2/ obj-$(CONFIG_IA64_GENERIC) += machvec.o obj-$(CONFIG_SGI_TIOCX) += tiocx.o obj-$(CONFIG_IA64_SGI_SN_XP) += xp.o diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index 3edef0d32f8..dfb3f290237 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -716,4 +716,3 @@ EXPORT_SYMBOL(sn_pci_unfixup_slot); EXPORT_SYMBOL(sn_pci_controller_fixup); EXPORT_SYMBOL(sn_bus_store_sysdata); EXPORT_SYMBOL(sn_bus_free_sysdata); -EXPORT_SYMBOL(sn_pcidev_info_get); diff --git a/arch/ia64/sn/kernel/pio_phys.S b/arch/ia64/sn/kernel/pio_phys.S new file mode 100644 index 00000000000..3c7d48d6ecb --- /dev/null +++ b/arch/ia64/sn/kernel/pio_phys.S @@ -0,0 +1,71 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved. + * + * This file contains macros used to access MMR registers via + * uncached physical addresses. + * pio_phys_read_mmr - read an MMR + * pio_phys_write_mmr - write an MMR + * pio_atomic_phys_write_mmrs - atomically write 1 or 2 MMRs with psr.ic=0 + * Second MMR will be skipped if address is NULL + * + * Addresses passed to these routines should be uncached physical addresses + * ie., 0x80000.... + */ + + + +#include <asm/asmmacro.h> +#include <asm/page.h> + +GLOBAL_ENTRY(pio_phys_read_mmr) + .prologue + .regstk 1,0,0,0 + .body + mov r2=psr + rsm psr.i | psr.dt + ;; + srlz.d + ld8.acq r8=[r32] + ;; + mov psr.l=r2;; + srlz.d + br.ret.sptk.many rp +END(pio_phys_read_mmr) + +GLOBAL_ENTRY(pio_phys_write_mmr) + .prologue + .regstk 2,0,0,0 + .body + mov r2=psr + rsm psr.i | psr.dt + ;; + srlz.d + st8.rel [r32]=r33 + ;; + mov psr.l=r2;; + srlz.d + br.ret.sptk.many rp +END(pio_phys_write_mmr) + +GLOBAL_ENTRY(pio_atomic_phys_write_mmrs) + .prologue + .regstk 4,0,0,0 + .body + mov r2=psr + cmp.ne p9,p0=r34,r0; + rsm psr.i | psr.dt | psr.ic + ;; + srlz.d + st8.rel [r32]=r33 +(p9) st8.rel [r34]=r35 + ;; + mov psr.l=r2;; + srlz.d + br.ret.sptk.many rp +END(pio_atomic_phys_write_mmrs) + + diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index 5b84836c217..8b6d5c84470 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1999,2001-2005 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 1999,2001-2006 Silicon Graphics, Inc. All rights reserved. */ #include <linux/config.h> @@ -498,6 +498,7 @@ void __init sn_setup(char **cmdline_p) * for sn. */ pm_power_off = ia64_sn_power_down; + current->thread.flags |= IA64_THREAD_MIGRATION; } /** @@ -660,7 +661,8 @@ void __init sn_cpu_init(void) SH2_PIO_WRITE_STATUS_1, SH2_PIO_WRITE_STATUS_3}; u64 *pio; pio = is_shub1() ? pio1 : pio2; - pda->pio_write_status_addr = (volatile unsigned long *) LOCAL_MMR_ADDR(pio[slice]); + pda->pio_write_status_addr = + (volatile unsigned long *)GLOBAL_MMR_ADDR(nasid, pio[slice]); pda->pio_write_status_val = is_shub1() ? SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK : 0; } diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c index 24eefb2fc55..d9d306c79f2 100644 --- a/arch/ia64/sn/kernel/sn2/sn2_smp.c +++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c @@ -93,6 +93,27 @@ static inline unsigned long wait_piowc(void) return (ws & SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK) != 0; } +/** + * sn_migrate - SN-specific task migration actions + * @task: Task being migrated to new CPU + * + * SN2 PIO writes from separate CPUs are not guaranteed to arrive in order. + * Context switching user threads which have memory-mapped MMIO may cause + * PIOs to issue from seperate CPUs, thus the PIO writes must be drained + * from the previous CPU's Shub before execution resumes on the new CPU. + */ +void sn_migrate(struct task_struct *task) +{ + pda_t *last_pda = pdacpu(task_thread_info(task)->last_cpu); + volatile unsigned long *adr = last_pda->pio_write_status_addr; + unsigned long val = last_pda->pio_write_status_val; + + /* Drain PIO writes from old CPU's Shub */ + while (unlikely((*adr & SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK) + != val)) + cpu_relax(); +} + void sn_tlb_migrate_finish(struct mm_struct *mm) { /* flush_tlb_mm is inefficient if more than 1 users of mm */ @@ -446,7 +467,7 @@ static struct proc_dir_entry *proc_sn2_ptc; static int __init sn2_ptc_init(void) { if (!ia64_platform_is("sn2")) - return -ENOSYS; + return 0; if (!(proc_sn2_ptc = create_proc_entry(PTC_BASENAME, 0444, NULL))) { printk(KERN_ERR "unable to create %s proc entry", PTC_BASENAME); diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c index 8a56f8b5ffa..99cb28e7429 100644 --- a/arch/ia64/sn/kernel/tiocx.c +++ b/arch/ia64/sn/kernel/tiocx.c @@ -484,7 +484,7 @@ static int __init tiocx_init(void) int found_tiocx_device = 0; if (!ia64_platform_is("sn2")) - return -ENODEV; + return 0; bus_register(&tiocx_bus_type); diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c index e52831ed93e..fa073cc4b56 100644 --- a/arch/ia64/sn/pci/tioce_provider.c +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -15,6 +15,124 @@ #include <asm/sn/pcidev.h> #include <asm/sn/pcibus_provider_defs.h> #include <asm/sn/tioce_provider.h> +#include <asm/sn/sn2/sn_hwperf.h> + +/* + * 1/26/2006 + * + * WAR for SGI PV 944642. For revA TIOCE, need to use the following recipe + * (taken from the above PV) before and after accessing tioce internal MMR's + * to avoid tioce lockups. + * + * The recipe as taken from the PV: + * + * if(mmr address < 0x45000) { + * if(mmr address == 0 or 0x80) + * mmr wrt or read address 0xc0 + * else if(mmr address == 0x148 or 0x200) + * mmr wrt or read address 0x28 + * else + * mmr wrt or read address 0x158 + * + * do desired mmr access (rd or wrt) + * + * if(mmr address == 0x100) + * mmr wrt or read address 0x38 + * mmr wrt or read address 0xb050 + * } else + * do desired mmr access + * + * According to hw, we can use reads instead of writes to the above addres + * + * Note this WAR can only to be used for accessing internal MMR's in the + * TIOCE Coretalk Address Range 0x0 - 0x07ff_ffff. This includes the + * "Local CE Registers and Memories" and "PCI Compatible Config Space" address + * spaces from table 2-1 of the "CE Programmer's Reference Overview" document. + * + * All registers defined in struct tioce will meet that criteria. + */ + +static void inline +tioce_mmr_war_pre(struct tioce_kernel *kern, void *mmr_addr) +{ + u64 mmr_base; + u64 mmr_offset; + + if (kern->ce_common->ce_rev != TIOCE_REV_A) + return; + + mmr_base = kern->ce_common->ce_pcibus.bs_base; + mmr_offset = (u64)mmr_addr - mmr_base; + + if (mmr_offset < 0x45000) { + u64 mmr_war_offset; + + if (mmr_offset == 0 || mmr_offset == 0x80) + mmr_war_offset = 0xc0; + else if (mmr_offset == 0x148 || mmr_offset == 0x200) + mmr_war_offset = 0x28; + else + mmr_war_offset = 0x158; + + readq_relaxed((void *)(mmr_base + mmr_war_offset)); + } +} + +static void inline +tioce_mmr_war_post(struct tioce_kernel *kern, void *mmr_addr) +{ + u64 mmr_base; + u64 mmr_offset; + + if (kern->ce_common->ce_rev != TIOCE_REV_A) + return; + + mmr_base = kern->ce_common->ce_pcibus.bs_base; + mmr_offset = (u64)mmr_addr - mmr_base; + + if (mmr_offset < 0x45000) { + if (mmr_offset == 0x100) + readq_relaxed((void *)(mmr_base + 0x38)); + readq_relaxed((void *)(mmr_base + 0xb050)); + } +} + +/* load mmr contents into a variable */ +#define tioce_mmr_load(kern, mmrp, varp) do {\ + tioce_mmr_war_pre(kern, mmrp); \ + *(varp) = readq_relaxed(mmrp); \ + tioce_mmr_war_post(kern, mmrp); \ +} while (0) + +/* store variable contents into mmr */ +#define tioce_mmr_store(kern, mmrp, varp) do {\ + tioce_mmr_war_pre(kern, mmrp); \ + writeq(*varp, mmrp); \ + tioce_mmr_war_post(kern, mmrp); \ +} while (0) + +/* store immediate value into mmr */ +#define tioce_mmr_storei(kern, mmrp, val) do {\ + tioce_mmr_war_pre(kern, mmrp); \ + writeq(val, mmrp); \ + tioce_mmr_war_post(kern, mmrp); \ +} while (0) + +/* set bits (immediate value) into mmr */ +#define tioce_mmr_seti(kern, mmrp, bits) do {\ + u64 tmp; \ + tioce_mmr_load(kern, mmrp, &tmp); \ + tmp |= (bits); \ + tioce_mmr_store(kern, mmrp, &tmp); \ +} while (0) + +/* clear bits (immediate value) into mmr */ +#define tioce_mmr_clri(kern, mmrp, bits) do { \ + u64 tmp; \ + tioce_mmr_load(kern, mmrp, &tmp); \ + tmp &= ~(bits); \ + tioce_mmr_store(kern, mmrp, &tmp); \ +} while (0) /** * Bus address ranges for the 5 flavors of TIOCE DMA @@ -62,9 +180,9 @@ #define TIOCE_ATE_M40 2 #define TIOCE_ATE_M40S 3 -#define KB(x) ((x) << 10) -#define MB(x) ((x) << 20) -#define GB(x) ((x) << 30) +#define KB(x) ((u64)(x) << 10) +#define MB(x) ((u64)(x) << 20) +#define GB(x) ((u64)(x) << 30) /** * tioce_dma_d64 - create a DMA mapping using 64-bit direct mode @@ -151,7 +269,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port, int last; int entries; int nates; - int pagesize; + u64 pagesize; u64 *ate_shadow; u64 *ate_reg; u64 addr; @@ -228,7 +346,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port, ate = ATE_MAKE(addr, pagesize); ate_shadow[i + j] = ate; - writeq(ate, &ate_reg[i + j]); + tioce_mmr_storei(ce_kern, &ate_reg[i + j], ate); addr += pagesize; } @@ -272,7 +390,8 @@ tioce_dma_d32(struct pci_dev *pdev, u64 ct_addr) u64 tmp; ce_kern->ce_port[port].dirmap_shadow = ct_upper; - writeq(ct_upper, &ce_mmr->ce_ure_dir_map[port]); + tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port], + ct_upper); tmp = ce_mmr->ce_ure_dir_map[port]; dma_ok = 1; } else @@ -344,7 +463,8 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir) if (TIOCE_D32_ADDR(bus_addr)) { if (--ce_kern->ce_port[port].dirmap_refcnt == 0) { ce_kern->ce_port[port].dirmap_shadow = 0; - writeq(0, &ce_mmr->ce_ure_dir_map[port]); + tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port], + 0); } } else { struct tioce_dmamap *map; @@ -365,7 +485,7 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir) } else if (--map->refcnt == 0) { for (i = 0; i < map->ate_count; i++) { map->ate_shadow[i] = 0; - map->ate_hw[i] = 0; + tioce_mmr_storei(ce_kern, &map->ate_hw[i], 0); } list_del(&map->ce_dmamap_list); @@ -486,7 +606,7 @@ tioce_do_dma_map(struct pci_dev *pdev, u64 paddr, size_t byte_count, spin_unlock_irqrestore(&ce_kern->ce_lock, flags); dma_map_done: - if (mapaddr & barrier) + if (mapaddr && barrier) mapaddr = tioce_dma_barrier(mapaddr, 1); return mapaddr; @@ -541,17 +661,61 @@ tioce_error_intr_handler(int irq, void *arg, struct pt_regs *pt) soft->ce_pcibus.bs_persist_segment, soft->ce_pcibus.bs_persist_busnum, 0, 0, 0, 0, 0); + if (ret_stuff.v0) + panic("tioce_error_intr_handler: Fatal TIOCE error"); + return IRQ_HANDLED; } /** + * tioce_reserve_m32 - reserve M32 ate's for the indicated address range + * @tioce_kernel: TIOCE context to reserve ate's for + * @base: starting bus address to reserve + * @limit: last bus address to reserve + * + * If base/limit falls within the range of bus space mapped through the + * M32 space, reserve the resources corresponding to the range. + */ +static void +tioce_reserve_m32(struct tioce_kernel *ce_kern, u64 base, u64 limit) +{ + int ate_index, last_ate, ps; + struct tioce *ce_mmr; + + if (!TIOCE_M32_ADDR(base)) + return; + + ce_mmr = (struct tioce *)ce_kern->ce_common->ce_pcibus.bs_base; + ps = ce_kern->ce_ate3240_pagesize; + ate_index = ATE_PAGE(base, ps); + last_ate = ate_index + ATE_NPAGES(base, limit-base+1, ps) - 1; + + if (ate_index < 64) + ate_index = 64; + + while (ate_index <= last_ate) { + u64 ate; + + ate = ATE_MAKE(0xdeadbeef, ps); + ce_kern->ce_ate3240_shadow[ate_index] = ate; + tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_ate3240[ate_index], + ate); + ate_index++; + } +} + +/** * tioce_kern_init - init kernel structures related to a given TIOCE * @tioce_common: ptr to a cached tioce_common struct that originated in prom - */ static struct tioce_kernel * + */ +static struct tioce_kernel * tioce_kern_init(struct tioce_common *tioce_common) { int i; + int ps; + int dev; u32 tmp; + unsigned int seg, bus; struct tioce *tioce_mmr; struct tioce_kernel *tioce_kern; @@ -572,9 +736,10 @@ tioce_kern_init(struct tioce_common *tioce_common) * here to use pci_read_config_xxx() so use the raw_pci_ops vector. */ - raw_pci_ops->read(tioce_common->ce_pcibus.bs_persist_segment, - tioce_common->ce_pcibus.bs_persist_busnum, - PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1, &tmp); + seg = tioce_common->ce_pcibus.bs_persist_segment; + bus = tioce_common->ce_pcibus.bs_persist_busnum; + + raw_pci_ops->read(seg, bus, PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1,&tmp); tioce_kern->ce_port1_secondary = (u8) tmp; /* @@ -583,18 +748,76 @@ tioce_kern_init(struct tioce_common *tioce_common) */ tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base; - __sn_clrq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_PAGESIZE_MASK); - __sn_setq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_256K_PAGESIZE); - tioce_kern->ce_ate3240_pagesize = KB(256); + tioce_mmr_clri(tioce_kern, &tioce_mmr->ce_ure_page_map, + CE_URE_PAGESIZE_MASK); + tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_ure_page_map, + CE_URE_256K_PAGESIZE); + ps = tioce_kern->ce_ate3240_pagesize = KB(256); for (i = 0; i < TIOCE_NUM_M40_ATES; i++) { tioce_kern->ce_ate40_shadow[i] = 0; - writeq(0, &tioce_mmr->ce_ure_ate40[i]); + tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate40[i], 0); } for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) { tioce_kern->ce_ate3240_shadow[i] = 0; - writeq(0, &tioce_mmr->ce_ure_ate3240[i]); + tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate3240[i], 0); + } + + /* + * Reserve ATE's corresponding to reserved address ranges. These + * include: + * + * Memory space covered by each PPB mem base/limit register + * Memory space covered by each PPB prefetch base/limit register + * + * These bus ranges are for pio (downstream) traffic only, and so + * cannot be used for DMA. + */ + + for (dev = 1; dev <= 2; dev++) { + u64 base, limit; + + /* mem base/limit */ + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_MEMORY_BASE, 2, &tmp); + base = (u64)tmp << 16; + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_MEMORY_LIMIT, 2, &tmp); + limit = (u64)tmp << 16; + limit |= 0xfffffUL; + + if (base < limit) + tioce_reserve_m32(tioce_kern, base, limit); + + /* + * prefetch mem base/limit. The tioce ppb's have 64-bit + * decoders, so read the upper portions w/o checking the + * attributes. + */ + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_PREF_MEMORY_BASE, 2, &tmp); + base = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16; + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_PREF_BASE_UPPER32, 4, &tmp); + base |= (u64)tmp << 32; + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_PREF_MEMORY_LIMIT, 2, &tmp); + + limit = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16; + limit |= 0xfffffUL; + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_PREF_LIMIT_UPPER32, 4, &tmp); + limit |= (u64)tmp << 32; + + if ((base < limit) && TIOCE_M32_ADDR(base)) + tioce_reserve_m32(tioce_kern, base, limit); } return tioce_kern; @@ -614,6 +837,7 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info) { struct pcidev_info *pcidev_info; struct tioce_common *ce_common; + struct tioce_kernel *ce_kern; struct tioce *ce_mmr; u64 force_int_val; @@ -629,6 +853,29 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info) ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info; ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base; + ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private; + + /* + * TIOCE Rev A workaround (PV 945826), force an interrupt by writing + * the TIO_INTx register directly (1/26/2006) + */ + if (ce_common->ce_rev == TIOCE_REV_A) { + u64 int_bit_mask = (1ULL << sn_irq_info->irq_int_bit); + u64 status; + + tioce_mmr_load(ce_kern, &ce_mmr->ce_adm_int_status, &status); + if (status & int_bit_mask) { + u64 force_irq = (1 << 8) | sn_irq_info->irq_irq; + u64 ctalk = sn_irq_info->irq_xtalkaddr; + u64 nasid, offset; + + nasid = (ctalk & CTALK_NASID_MASK) >> CTALK_NASID_SHFT; + offset = (ctalk & CTALK_NODE_OFFSET); + HUB_S(TIO_IOSPACE_ADDR(nasid, offset), force_irq); + } + + return; + } /* * irq_int_bit is originally set up by prom, and holds the interrupt @@ -666,7 +913,7 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info) default: return; } - writeq(force_int_val, &ce_mmr->ce_adm_force_int); + tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_force_int, force_int_val); } /** @@ -685,6 +932,7 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info) { struct pcidev_info *pcidev_info; struct tioce_common *ce_common; + struct tioce_kernel *ce_kern; struct tioce *ce_mmr; int bit; u64 vector; @@ -695,14 +943,15 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info) ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info; ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base; + ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private; bit = sn_irq_info->irq_int_bit; - __sn_setq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit)); + tioce_mmr_seti(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit)); vector = (u64)sn_irq_info->irq_irq << INTR_VECTOR_SHFT; vector |= sn_irq_info->irq_xtalkaddr; - writeq(vector, &ce_mmr->ce_adm_int_dest[bit]); - __sn_clrq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit)); + tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_int_dest[bit], vector); + tioce_mmr_clri(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit)); tioce_force_interrupt(sn_irq_info); } @@ -721,7 +970,11 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info) static void * tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller) { + int my_nasid; + cnodeid_t my_cnode, mem_cnode; struct tioce_common *tioce_common; + struct tioce_kernel *tioce_kern; + struct tioce *tioce_mmr; /* * Allocate kernel bus soft and copy from prom. @@ -734,11 +987,23 @@ tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont memcpy(tioce_common, prom_bussoft, sizeof(struct tioce_common)); tioce_common->ce_pcibus.bs_base |= __IA64_UNCACHED_OFFSET; - if (tioce_kern_init(tioce_common) == NULL) { + tioce_kern = tioce_kern_init(tioce_common); + if (tioce_kern == NULL) { kfree(tioce_common); return NULL; } + /* + * Clear out any transient errors before registering the error + * interrupt handler. + */ + + tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base; + tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_int_status_alias, ~0ULL); + tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_error_summary_alias, + ~0ULL); + tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_dre_comp_err_addr, ~0ULL); + if (request_irq(SGI_PCIASIC_ERROR, tioce_error_intr_handler, SA_SHIRQ, "TIOCE error", (void *)tioce_common)) @@ -750,6 +1015,21 @@ tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont tioce_common->ce_pcibus.bs_persist_segment, tioce_common->ce_pcibus.bs_persist_busnum); + /* + * identify closest nasid for memory allocations + */ + + my_nasid = NASID_GET(tioce_common->ce_pcibus.bs_base); + my_cnode = nasid_to_cnodeid(my_nasid); + + if (sn_hwperf_get_nearest_node(my_cnode, &mem_cnode, NULL) < 0) { + printk(KERN_WARNING "tioce_bus_fixup: failed to find " + "closest node with MEM to TIO node %d\n", my_cnode); + mem_cnode = (cnodeid_t)-1; /* use any node */ + } + + controller->node = mem_cnode; + return tioce_common; } diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 767de847b4a..3a0f89d2c8d 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1053,6 +1053,7 @@ config CPU_MIPS32_R1 depends on SYS_HAS_CPU_MIPS32_R1 select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM help Choose this option to build a kernel for release 1 or later of the MIPS32 architecture. Most modern embedded systems with a 32-bit @@ -1069,6 +1070,7 @@ config CPU_MIPS32_R2 depends on SYS_HAS_CPU_MIPS32_R2 select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM help Choose this option to build a kernel for release 2 or later of the MIPS32 architecture. Most modern embedded systems with a 32-bit @@ -1082,6 +1084,7 @@ config CPU_MIPS64_R1 select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM help Choose this option to build a kernel for release 1 or later of the MIPS64 architecture. Many modern embedded systems with a 64-bit @@ -1099,6 +1102,7 @@ config CPU_MIPS64_R2 select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM help Choose this option to build a kernel for release 2 or later of the MIPS64 architecture. Many modern embedded systems with a 64-bit diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 38c0f3360d5..3d8dac681c6 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -95,6 +95,7 @@ endif # crossformat linking we rely on the elf2ecoff tool for format conversion. # cflags-y += -G 0 -mno-abicalls -fno-pic -pipe +cflags-y += -msoft-float LDFLAGS_vmlinux += -G 0 -static -n -nostdlib MODFLAGS += -mlong-calls @@ -107,7 +108,8 @@ MODFLAGS += -mlong-calls cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB) cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL) -cflags-$(CONFIG_SB1XXX_CORELIS) += -mno-sched-prolog -fno-omit-frame-pointer +cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \ + -fno-omit-frame-pointer # # Use: $(call set_gccflags,<cpu0>,<isa0>,<cpu1>,<isa1>,<isa2>) diff --git a/arch/mips/arc/arc_con.c b/arch/mips/arc/arc_con.c index 51785a6a732..bc32fe64f42 100644 --- a/arch/mips/arc/arc_con.c +++ b/arch/mips/arc/arc_con.c @@ -24,7 +24,7 @@ static void prom_console_write(struct console *co, const char *s, } } -static int __init prom_console_setup(struct console *co, char *options) +static int prom_console_setup(struct console *co, char *options) { return !(prom_flags & PROM_FLAG_USE_AS_CONSOLE); } diff --git a/arch/mips/arc/misc.c b/arch/mips/arc/misc.c index 84867de2202..b2e10b9e945 100644 --- a/arch/mips/arc/misc.c +++ b/arch/mips/arc/misc.c @@ -9,7 +9,6 @@ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) * Copyright (C) 1999 Silicon Graphics, Inc. */ -#include <linux/config.h> #include <linux/init.h> #include <linux/kernel.h> @@ -20,17 +19,11 @@ #include <asm/bootinfo.h> #include <asm/system.h> -extern void *sgiwd93_host; -extern void reset_wd33c93(void *instance); - VOID ArcHalt(VOID) { bc_disable(); local_irq_disable(); -#ifdef CONFIG_SCSI_SGIWD93 - reset_wd33c93(sgiwd93_host); -#endif ARC_CALL0(halt); never: goto never; } @@ -40,9 +33,6 @@ ArcPowerDown(VOID) { bc_disable(); local_irq_disable(); -#ifdef CONFIG_SCSI_SGIWD93 - reset_wd33c93(sgiwd93_host); -#endif ARC_CALL0(pdown); never: goto never; } @@ -53,9 +43,6 @@ ArcRestart(VOID) { bc_disable(); local_irq_disable(); -#ifdef CONFIG_SCSI_SGIWD93 - reset_wd33c93(sgiwd93_host); -#endif ARC_CALL0(restart); never: goto never; } @@ -65,9 +52,6 @@ ArcReboot(VOID) { bc_disable(); local_irq_disable(); -#ifdef CONFIG_SCSI_SGIWD93 - reset_wd33c93(sgiwd93_host); -#endif ARC_CALL0(reboot); never: goto never; } @@ -77,9 +61,6 @@ ArcEnterInteractiveMode(VOID) { bc_disable(); local_irq_disable(); -#ifdef CONFIG_SCSI_SGIWD93 - reset_wd33c93(sgiwd93_host); -#endif ARC_CALL0(imode); never: goto never; } diff --git a/arch/mips/au1000/common/reset.c b/arch/mips/au1000/common/reset.c index 4ffccedf596..c93af224c1b 100644 --- a/arch/mips/au1000/common/reset.c +++ b/arch/mips/au1000/common/reset.c @@ -164,17 +164,20 @@ void au1000_restart(char *command) void au1000_halt(void) { -#if defined(CONFIG_MIPS_PB1550) +#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) /* power off system */ - printk("\n** Powering off Pb1550\n"); + printk("\n** Powering off...\n"); au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C); au_sync(); while(1); /* should not get here */ -#endif +#else printk(KERN_NOTICE "\n** You can safely turn off the power\n"); #ifdef CONFIG_MIPS_MIRAGE au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT); #endif +#ifdef CONFIG_MIPS_DB1200 + au_writew(au_readw(0xB980001C) | (1<<14), 0xB980001C); +#endif #ifdef CONFIG_PM au_sleep(); @@ -187,6 +190,7 @@ void au1000_halt(void) "wait\n\t" ".set\tmips0"); #endif +#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */ } void au1000_power_off(void) diff --git a/arch/mips/kernel/irq-mv6434x.c b/arch/mips/kernel/irq-mv6434x.c index 0ac067f45cf..0613f1f36b1 100644 --- a/arch/mips/kernel/irq-mv6434x.c +++ b/arch/mips/kernel/irq-mv6434x.c @@ -11,12 +11,14 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/kernel.h> -#include <asm/ptrace.h> -#include <linux/sched.h> #include <linux/kernel_stat.h> +#include <linux/mv643xx.h> +#include <linux/sched.h> + +#include <asm/ptrace.h> #include <asm/io.h> #include <asm/irq.h> -#include <linux/mv643xx.h> +#include <asm/marvell.h> static unsigned int irq_base; diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 5f68b220c26..e00e5f6e7fd 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -161,60 +161,6 @@ out: return error; } -struct dirent32 { - unsigned int d_ino; - unsigned int d_off; - unsigned short d_reclen; - char d_name[NAME_MAX + 1]; -}; - -static void -xlate_dirent(void *dirent64, void *dirent32, long n) -{ - long off; - struct dirent *dirp; - struct dirent32 *dirp32; - - off = 0; - while (off < n) { - dirp = (struct dirent *)(dirent64 + off); - dirp32 = (struct dirent32 *)(dirent32 + off); - off += dirp->d_reclen; - dirp32->d_ino = dirp->d_ino; - dirp32->d_off = (unsigned int)dirp->d_off; - dirp32->d_reclen = dirp->d_reclen; - strncpy(dirp32->d_name, dirp->d_name, dirp->d_reclen - ((3 * 4) + 2)); - } - return; -} - -asmlinkage long -sys32_getdents(unsigned int fd, void * dirent32, unsigned int count) -{ - long n; - void *dirent64; - - dirent64 = (void *)((unsigned long)(dirent32 + (sizeof(long) - 1)) & ~(sizeof(long) - 1)); - if ((n = sys_getdents(fd, dirent64, count - (dirent64 - dirent32))) < 0) - return(n); - xlate_dirent(dirent64, dirent32, n); - return(n); -} - -asmlinkage int old_readdir(unsigned int fd, void * dirent, unsigned int count); - -asmlinkage int -sys32_readdir(unsigned int fd, void * dirent32, unsigned int count) -{ - int n; - struct dirent dirent64; - - if ((n = old_readdir(fd, &dirent64, count)) < 0) - return(n); - xlate_dirent(&dirent64, dirent32, dirent64.d_reclen); - return(n); -} - asmlinkage int sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr, int options) { diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index d87b5446fa1..02c8267e45e 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -195,7 +195,7 @@ EXPORT(sysn32_call_table) PTR sys_fdatasync PTR sys_truncate PTR sys_ftruncate /* 6075 */ - PTR sys32_getdents + PTR compat_sys_getdents PTR sys_getcwd PTR sys_chdir PTR sys_fchdir diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 5b0414018c9..797e0d87488 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -293,7 +293,7 @@ sys_call_table: PTR sys_uselib PTR sys_swapon PTR sys_reboot - PTR sys32_readdir + PTR compat_sys_old_readdir PTR old_mmap /* 4090 */ PTR sys_munmap PTR sys_truncate @@ -345,7 +345,7 @@ sys_call_table: PTR sys_setfsuid PTR sys_setfsgid PTR sys32_llseek /* 4140 */ - PTR sys32_getdents + PTR compat_sys_getdents PTR compat_sys_select PTR sys_flock PTR sys_msync diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index d86affa2127..d9293c558e4 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -540,6 +540,9 @@ void __init setup_arch(char **cmdline_p) sparse_init(); paging_init(); resource_init(); +#ifdef CONFIG_SMP + plat_smp_setup(); +#endif } int __init fpu_disable(char *s) diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 5e189862e52..06ed9075242 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -236,7 +236,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) init_new_context(current, &init_mm); current_thread_info()->cpu = 0; smp_tune_scheduling(); - prom_prepare_cpus(max_cpus); + plat_prepare_cpus(max_cpus); } /* preload SMP state for boot cpu */ diff --git a/arch/mips/kernel/smp_mt.c b/arch/mips/kernel/smp_mt.c index c930364830d..993b8bf56aa 100644 --- a/arch/mips/kernel/smp_mt.c +++ b/arch/mips/kernel/smp_mt.c @@ -143,7 +143,7 @@ static struct irqaction irq_call = { * Make sure all CPU's are in a sensible state before we boot any of the * secondarys */ -void prom_prepare_cpus(unsigned int max_cpus) +void plat_smp_setup(void) { unsigned long val; int i, num; @@ -179,11 +179,9 @@ void prom_prepare_cpus(unsigned int max_cpus) write_vpe_c0_vpeconf0(tmp); /* Record this as available CPU */ - if (i < max_cpus) { - cpu_set(i, phys_cpu_present_map); - __cpu_number_map[i] = ++num; - __cpu_logical_map[num] = i; - } + cpu_set(i, phys_cpu_present_map); + __cpu_number_map[i] = ++num; + __cpu_logical_map[num] = i; } /* disable multi-threading with TC's */ @@ -241,7 +239,10 @@ void prom_prepare_cpus(unsigned int max_cpus) set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch); set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch); } +} +void __init plat_prepare_cpus(unsigned int max_cpus) +{ cpu_ipi_resched_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ; cpu_ipi_call_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ; diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 7050b4ffffc..51273b7297a 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -163,7 +163,7 @@ void do_gettimeofday(struct timeval *tv) unsigned long seq; unsigned long lost; unsigned long usec, sec; - unsigned long max_ntp_tick = tick_usec - tickadj; + unsigned long max_ntp_tick; do { seq = read_seqbegin(&xtime_lock); @@ -178,12 +178,13 @@ void do_gettimeofday(struct timeval *tv) * Better to lose some accuracy than have time go backwards.. */ if (unlikely(time_adjust < 0)) { + max_ntp_tick = (USEC_PER_SEC / HZ) - tickadj; usec = min(usec, max_ntp_tick); if (lost) usec += lost * max_ntp_tick; } else if (unlikely(lost)) - usec += lost * tick_usec; + usec += lost * (USEC_PER_SEC / HZ); sec = xtime.tv_sec; usec += (xtime.tv_nsec / 1000); @@ -423,6 +424,8 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) unsigned long j; unsigned int count; + write_seqlock(&xtime_lock); + count = mips_hpt_read(); mips_timer_ack(); @@ -440,7 +443,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * CMOS clock accordingly every ~11 minutes. rtc_set_time() has to be * called as close as possible to 500 ms before the new second starts. */ - write_seqlock(&xtime_lock); if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && @@ -452,7 +454,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) last_rtc_update = xtime.tv_sec - 600; } } - write_sequnlock(&xtime_lock); /* * If jiffies has overflown in this timer_interrupt, we must @@ -495,6 +496,8 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) } } + write_sequnlock(&xtime_lock); + /* * In UP mode, we call local_timer_interrupt() to do profiling * and process accouting. diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index ff699dbb99f..2ad0cedf29f 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -106,6 +106,9 @@ SECTIONS .con_initcall.init : { *(.con_initcall.init) } __con_initcall_end = .; SECURITY_INIT + /* .exit.text is discarded at runtime, not link time, to deal with + references from .rodata */ + .exit.text : { *(.exit.text) } . = ALIGN(_PAGE_SIZE); __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } @@ -133,7 +136,6 @@ SECTIONS /* Sections to be discarded */ /DISCARD/ : { - *(.exit.text) *(.exit.data) *(.exitcall.exit) diff --git a/arch/mips/lib/iomap.c b/arch/mips/lib/iomap.c index 7e2ced715cf..f4ac5bbcd81 100644 --- a/arch/mips/lib/iomap.c +++ b/arch/mips/lib/iomap.c @@ -63,7 +63,7 @@ void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) return ioport_map(start, len); if (flags & IORESOURCE_MEM) { if (flags & IORESOURCE_CACHEABLE) - return ioremap_cacheable_cow(start, len); + return ioremap_cachable(start, len); return ioremap_nocache(start, len); } diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 1b71d91e826..9572ed44f0d 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -235,7 +235,9 @@ static inline void r4k_blast_scache_page_setup(void) { unsigned long sc_lsize = cpu_scache_line_size(); - if (sc_lsize == 16) + if (scache_size == 0) + r4k_blast_scache_page = (void *)no_sc_noop; + else if (sc_lsize == 16) r4k_blast_scache_page = blast_scache16_page; else if (sc_lsize == 32) r4k_blast_scache_page = blast_scache32_page; @@ -251,7 +253,9 @@ static inline void r4k_blast_scache_page_indexed_setup(void) { unsigned long sc_lsize = cpu_scache_line_size(); - if (sc_lsize == 16) + if (scache_size == 0) + r4k_blast_scache_page_indexed = (void *)no_sc_noop; + else if (sc_lsize == 16) r4k_blast_scache_page_indexed = blast_scache16_page_indexed; else if (sc_lsize == 32) r4k_blast_scache_page_indexed = blast_scache32_page_indexed; @@ -267,7 +271,9 @@ static inline void r4k_blast_scache_setup(void) { unsigned long sc_lsize = cpu_scache_line_size(); - if (sc_lsize == 16) + if (scache_size == 0) + r4k_blast_scache = (void *)no_sc_noop; + else if (sc_lsize == 16) r4k_blast_scache = blast_scache16; else if (sc_lsize == 32) r4k_blast_scache = blast_scache32; @@ -369,6 +375,7 @@ static void r4k_flush_cache_mm(struct mm_struct *mm) struct flush_cache_page_args { struct vm_area_struct *vma; unsigned long addr; + unsigned long pfn; }; static inline void local_r4k_flush_cache_page(void *args) @@ -376,6 +383,7 @@ static inline void local_r4k_flush_cache_page(void *args) struct flush_cache_page_args *fcp_args = args; struct vm_area_struct *vma = fcp_args->vma; unsigned long addr = fcp_args->addr; + unsigned long paddr = fcp_args->pfn << PAGE_SHIFT; int exec = vma->vm_flags & VM_EXEC; struct mm_struct *mm = vma->vm_mm; pgd_t *pgdp; @@ -425,11 +433,12 @@ static inline void local_r4k_flush_cache_page(void *args) * Do indexed flush, too much work to get the (possible) TLB refills * to work correctly. */ - addr = INDEX_BASE + (addr & (dcache_size - 1)); if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) { - r4k_blast_dcache_page_indexed(addr); - if (exec && !cpu_icache_snoops_remote_store) - r4k_blast_scache_page_indexed(addr); + r4k_blast_dcache_page_indexed(cpu_has_pindexed_dcache ? + paddr : addr); + if (exec && !cpu_icache_snoops_remote_store) { + r4k_blast_scache_page_indexed(paddr); + } } if (exec) { if (cpu_has_vtag_icache) { @@ -449,6 +458,7 @@ static void r4k_flush_cache_page(struct vm_area_struct *vma, args.vma = vma; args.addr = addr; + args.pfn = pfn; on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1); } @@ -482,7 +492,7 @@ static inline void local_r4k_flush_icache_range(void *args) protected_blast_dcache_range(start, end); } - if (!cpu_icache_snoops_remote_store) { + if (!cpu_icache_snoops_remote_store && scache_size) { if (end - start > scache_size) r4k_blast_scache(); else @@ -651,7 +661,7 @@ static void local_r4k_flush_cache_sigtramp(void * arg) R4600_HIT_CACHEOP_WAR_IMPL; protected_writeback_dcache_line(addr & ~(dc_lsize - 1)); - if (!cpu_icache_snoops_remote_store) + if (!cpu_icache_snoops_remote_store && scache_size) protected_writeback_scache_line(addr & ~(sc_lsize - 1)); protected_flush_icache_line(addr & ~(ic_lsize - 1)); if (MIPS4K_ICACHE_REFILL_WAR) { @@ -950,6 +960,7 @@ static void __init probe_pcache(void) switch (c->cputype) { case CPU_20KC: case CPU_25KF: + c->dcache.flags |= MIPS_CACHE_PINDEX; case CPU_R10000: case CPU_R12000: case CPU_SB1: diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c index 7c572bea4a9..fe232e3988e 100644 --- a/arch/mips/mm/c-tx39.c +++ b/arch/mips/mm/c-tx39.c @@ -210,7 +210,6 @@ static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page * Do indexed flush, too much work to get the (possible) TLB refills * to work correctly. */ - page = (KSEG0 + (page & (dcache_size - 1))); if (cpu_has_dc_aliases || exec) tx39_blast_dcache_page_indexed(page); if (exec) diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 0f9485806ba..ac4f4bfaae5 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -280,69 +280,69 @@ static void __init build_insn(u32 **buf, enum opcode opc, ...) } #define I_u1u2u3(op) \ - static inline void i##op(u32 **buf, unsigned int a, \ + static inline void __init i##op(u32 **buf, unsigned int a, \ unsigned int b, unsigned int c) \ { \ build_insn(buf, insn##op, a, b, c); \ } #define I_u2u1u3(op) \ - static inline void i##op(u32 **buf, unsigned int a, \ + static inline void __init i##op(u32 **buf, unsigned int a, \ unsigned int b, unsigned int c) \ { \ build_insn(buf, insn##op, b, a, c); \ } #define I_u3u1u2(op) \ - static inline void i##op(u32 **buf, unsigned int a, \ + static inline void __init i##op(u32 **buf, unsigned int a, \ unsigned int b, unsigned int c) \ { \ build_insn(buf, insn##op, b, c, a); \ } #define I_u1u2s3(op) \ - static inline void i##op(u32 **buf, unsigned int a, \ + static inline void __init i##op(u32 **buf, unsigned int a, \ unsigned int b, signed int c) \ { \ build_insn(buf, insn##op, a, b, c); \ } #define I_u2s3u1(op) \ - static inline void i##op(u32 **buf, unsigned int a, \ + static inline void __init i##op(u32 **buf, unsigned int a, \ signed int b, unsigned int c) \ { \ build_insn(buf, insn##op, c, a, b); \ } #define I_u2u1s3(op) \ - static inline void i##op(u32 **buf, unsigned int a, \ + static inline void __init i##op(u32 **buf, unsigned int a, \ unsigned int b, signed int c) \ { \ build_insn(buf, insn##op, b, a, c); \ } #define I_u1u2(op) \ - static inline void i##op(u32 **buf, unsigned int a, \ + static inline void __init i##op(u32 **buf, unsigned int a, \ unsigned int b) \ { \ build_insn(buf, insn##op, a, b); \ } #define I_u1s2(op) \ - static inline void i##op(u32 **buf, unsigned int a, \ + static inline void __init i##op(u32 **buf, unsigned int a, \ signed int b) \ { \ build_insn(buf, insn##op, a, b); \ } #define I_u1(op) \ - static inline void i##op(u32 **buf, unsigned int a) \ + static inline void __init i##op(u32 **buf, unsigned int a) \ { \ build_insn(buf, insn##op, a); \ } #define I_0(op) \ - static inline void i##op(u32 **buf) \ + static inline void __init i##op(u32 **buf) \ { \ build_insn(buf, insn##op); \ } @@ -623,42 +623,42 @@ static __init int __attribute__((unused)) insn_has_bdelay(struct reloc *rel, } /* convenience functions for labeled branches */ -static void __attribute__((unused)) il_bltz(u32 **p, struct reloc **r, - unsigned int reg, enum label_id l) +static void __init __attribute__((unused)) + il_bltz(u32 **p, struct reloc **r, unsigned int reg, enum label_id l) { r_mips_pc16(r, *p, l); i_bltz(p, reg, 0); } -static void __attribute__((unused)) il_b(u32 **p, struct reloc **r, +static void __init __attribute__((unused)) il_b(u32 **p, struct reloc **r, enum label_id l) { r_mips_pc16(r, *p, l); i_b(p, 0); } -static void il_beqz(u32 **p, struct reloc **r, unsigned int reg, +static void __init il_beqz(u32 **p, struct reloc **r, unsigned int reg, enum label_id l) { r_mips_pc16(r, *p, l); i_beqz(p, reg, 0); } -static void __attribute__((unused)) +static void __init __attribute__((unused)) il_beqzl(u32 **p, struct reloc **r, unsigned int reg, enum label_id l) { r_mips_pc16(r, *p, l); i_beqzl(p, reg, 0); } -static void il_bnez(u32 **p, struct reloc **r, unsigned int reg, +static void __init il_bnez(u32 **p, struct reloc **r, unsigned int reg, enum label_id l) { r_mips_pc16(r, *p, l); i_bnez(p, reg, 0); } -static void il_bgezl(u32 **p, struct reloc **r, unsigned int reg, +static void __init il_bgezl(u32 **p, struct reloc **r, unsigned int reg, enum label_id l) { r_mips_pc16(r, *p, l); diff --git a/arch/mips/momentum/jaguar_atx/prom.c b/arch/mips/momentum/jaguar_atx/prom.c index aae7a802767..1cadaa92946 100644 --- a/arch/mips/momentum/jaguar_atx/prom.c +++ b/arch/mips/momentum/jaguar_atx/prom.c @@ -21,10 +21,10 @@ #include <linux/mm.h> #include <linux/sched.h> #include <linux/bootmem.h> +#include <linux/mv643xx.h> #include <asm/addrspace.h> #include <asm/bootinfo.h> -#include <asm/mv64340.h> #include <asm/pmon.h> #include "jaguar_atx_fpga.h" diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c index 301d67226d7..2699917b640 100644 --- a/arch/mips/momentum/jaguar_atx/setup.c +++ b/arch/mips/momentum/jaguar_atx/setup.c @@ -2,7 +2,7 @@ * BRIEF MODULE DESCRIPTION * Momentum Computer Jaguar-ATX board dependent boot routines * - * Copyright (C) 1996, 1997, 2001, 2004 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 1996, 1997, 2001, 04, 06 Ralf Baechle (ralf@linux-mips.org) * Copyright (C) 2000 RidgeRun, Inc. * Copyright (C) 2001 Red Hat, Inc. * Copyright (C) 2002 Momentum Computer @@ -55,6 +55,8 @@ #include <linux/interrupt.h> #include <linux/timex.h> #include <linux/vmalloc.h> +#include <linux/mv643xx.h> + #include <asm/time.h> #include <asm/bootinfo.h> #include <asm/page.h> @@ -64,7 +66,6 @@ #include <asm/ptrace.h> #include <asm/reboot.h> #include <asm/tlbflush.h> -#include <asm/mv64340.h> #include "jaguar_atx_fpga.h" diff --git a/arch/mips/momentum/ocelot_c/irq.c b/arch/mips/momentum/ocelot_c/irq.c index 300fe8e4fbe..a5764bc20e3 100644 --- a/arch/mips/momentum/ocelot_c/irq.c +++ b/arch/mips/momentum/ocelot_c/irq.c @@ -41,11 +41,11 @@ #include <linux/slab.h> #include <linux/random.h> #include <linux/bitops.h> +#include <linux/mv643xx.h> #include <asm/bootinfo.h> #include <asm/io.h> #include <asm/irq_cpu.h> #include <asm/mipsregs.h> -#include <asm/mv64340.h> #include <asm/system.h> extern asmlinkage void ocelot_handle_int(void); diff --git a/arch/mips/momentum/ocelot_c/prom.c b/arch/mips/momentum/ocelot_c/prom.c index 5b6809724b1..e92364482c7 100644 --- a/arch/mips/momentum/ocelot_c/prom.c +++ b/arch/mips/momentum/ocelot_c/prom.c @@ -19,10 +19,10 @@ #include <linux/mm.h> #include <linux/sched.h> #include <linux/bootmem.h> +#include <linux/mv643xx.h> #include <asm/addrspace.h> #include <asm/bootinfo.h> -#include <asm/mv64340.h> #include <asm/pmon.h> #include "ocelot_c_fpga.h" diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c index 15998d8a934..bd02e60d037 100644 --- a/arch/mips/momentum/ocelot_c/setup.c +++ b/arch/mips/momentum/ocelot_c/setup.c @@ -54,6 +54,7 @@ #include <linux/pm.h> #include <linux/timex.h> #include <linux/vmalloc.h> +#include <linux/mv643xx.h> #include <asm/time.h> #include <asm/bootinfo.h> @@ -64,9 +65,9 @@ #include <asm/processor.h> #include <asm/ptrace.h> #include <asm/reboot.h> +#include <asm/marvell.h> #include <linux/bootmem.h> #include <linux/blkdev.h> -#include <asm/mv64340.h> #include "ocelot_c_fpga.h" unsigned long marvell_base; @@ -252,22 +253,22 @@ void __init plat_setup(void) /* shut down ethernet ports, just to be sure our memory doesn't get * corrupted by random ethernet traffic. */ - MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8); - MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8); - MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8); - MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8); + MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8); + MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8); + MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8); + MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8); do {} - while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff); + while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff); do {} - while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff); + while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff); do {} - while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff); + while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff); do {} - while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff); - MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0), - MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1); - MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1), - MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1); + while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff); + MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0), + MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1); + MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1), + MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1); /* Turn off the Bit-Error LED */ OCELOT_FPGA_WRITE(0x80, CLR); diff --git a/arch/mips/pci/pci-ocelot-c.c b/arch/mips/pci/pci-ocelot-c.c index 1d84d36e034..027759f7c90 100644 --- a/arch/mips/pci/pci-ocelot-c.c +++ b/arch/mips/pci/pci-ocelot-c.c @@ -3,15 +3,17 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2004, 06 by Ralf Baechle (ralf@linux-mips.org) */ #include <linux/types.h> #include <linux/pci.h> -#include <asm/mv64340.h> +#include <linux/mv643xx.h> #include <linux/init.h> +#include <asm/marvell.h> + /* * We assume the address ranges have already been setup appropriately by * the firmware. PMON in case of the Ocelot C does that. diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c index 7f8fda96219..c197311e15d 100644 --- a/arch/mips/pmc-sierra/yosemite/smp.c +++ b/arch/mips/pmc-sierra/yosemite/smp.c @@ -50,37 +50,25 @@ void __init prom_grab_secondary(void) * We don't want to start the secondary CPU yet nor do we have a nice probing * feature in PMON so we just assume presence of the secondary core. */ -static char maxcpus_string[] __initdata = - KERN_WARNING "max_cpus set to 0; using 1 instead\n"; - -void __init prom_prepare_cpus(unsigned int max_cpus) +void __init plat_smp_setup(void) { - int enabled = 0, i; - - if (max_cpus == 0) { - printk(maxcpus_string); - max_cpus = 1; - } + int i; cpus_clear(phys_cpu_present_map); for (i = 0; i < 2; i++) { - if (i == max_cpus) - break; - - /* - * The boot CPU - */ cpu_set(i, phys_cpu_present_map); __cpu_number_map[i] = i; __cpu_logical_map[i] = i; - enabled++; } +} +void __init plat_prepare_cpus(unsigned int max_cpus) +{ /* * Be paranoid. Enable the IPI only if we're really about to go SMP. */ - if (enabled > 1) + if (cpus_weight(cpu_possible_map)) set_c0_status(STATUSF_IP5); } diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c index dbef3f6b565..09fa7f5216f 100644 --- a/arch/mips/sgi-ip27/ip27-smp.c +++ b/arch/mips/sgi-ip27/ip27-smp.c @@ -140,7 +140,7 @@ static __init void intr_clear_all(nasid_t nasid) REMOTE_HUB_CLR_INTR(nasid, i); } -void __init prom_prepare_cpus(unsigned int max_cpus) +void __init plat_smp_setup(void) { cnodeid_t cnode; @@ -161,6 +161,11 @@ void __init prom_prepare_cpus(unsigned int max_cpus) alloc_cpupda(0, 0); } +void __init plat_prepare_cpus(unsigned int max_cpus) +{ + /* We already did everything necessary earlier */ +} + /* * Launch a slave into smp_bootstrap(). It doesn't take an argument, and we * set sp to the kernel stack of the newly created idle process, gp to the proc diff --git a/arch/mips/sibyte/cfe/smp.c b/arch/mips/sibyte/cfe/smp.c index 4477af3d807..eab20e2db32 100644 --- a/arch/mips/sibyte/cfe/smp.c +++ b/arch/mips/sibyte/cfe/smp.c @@ -31,7 +31,7 @@ * * Common setup before any secondaries are started */ -void __init prom_prepare_cpus(unsigned int max_cpus) +void __init plat_smp_setup(void) { int i, num; @@ -40,14 +40,18 @@ void __init prom_prepare_cpus(unsigned int max_cpus) __cpu_number_map[0] = 0; __cpu_logical_map[0] = 0; - for (i=1, num=0; i<NR_CPUS; i++) { + for (i = 1, num = 0; i < NR_CPUS; i++) { if (cfe_cpu_stop(i) == 0) { cpu_set(i, phys_cpu_present_map); __cpu_number_map[i] = ++num; __cpu_logical_map[num] = i; } } - printk("Detected %i available secondary CPU(s)\n", num); + printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num); +} + +void __init plat_prepare_cpus(unsigned int max_cpus) +{ } /* diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c index 511c89d65f3..1588f6debd9 100644 --- a/arch/mips/sibyte/sb1250/time.c +++ b/arch/mips/sibyte/sb1250/time.c @@ -47,23 +47,51 @@ #define IMR_IP3_VAL K_INT_MAP_I1 #define IMR_IP4_VAL K_INT_MAP_I2 +#define SB1250_HPT_NUM 3 +#define SB1250_HPT_VALUE M_SCD_TIMER_CNT /* max value */ +#define SB1250_HPT_SHIFT ((sizeof(unsigned int)*8)-V_SCD_TIMER_WIDTH) + + extern int sb1250_steal_irq(int irq); +static unsigned int sb1250_hpt_read(void); +static void sb1250_hpt_init(unsigned int); + +static unsigned int hpt_offset; + +void __init sb1250_hpt_setup(void) +{ + int cpu = smp_processor_id(); + + if (!cpu) { + /* Setup hpt using timer #3 but do not enable irq for it */ + __raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CFG))); + __raw_writeq(SB1250_HPT_VALUE, + IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_INIT))); + __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, + IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CFG))); + + /* + * we need to fill 32 bits, so just use the upper 23 bits and pretend + * the timer is going 512Mhz instead of 1Mhz + */ + mips_hpt_frequency = V_SCD_TIMER_FREQ << SB1250_HPT_SHIFT; + mips_hpt_init = sb1250_hpt_init; + mips_hpt_read = sb1250_hpt_read; + } +} + + void sb1250_time_init(void) { int cpu = smp_processor_id(); int irq = K_INT_TIMER_0+cpu; - /* Only have 4 general purpose timers */ - if (cpu > 3) { + /* Only have 4 general purpose timers, and we use last one as hpt */ + if (cpu > 2) { BUG(); } - if (!cpu) { - /* Use our own gettimeoffset() routine */ - do_gettimeoffset = sb1250_gettimeoffset; - } - sb1250_mask_irq(cpu, irq); /* Map the timer interrupt to ip[4] of this cpu */ @@ -75,10 +103,10 @@ void sb1250_time_init(void) /* Disable the timer and set up the count */ __raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG))); #ifdef CONFIG_SIMULATION - __raw_writeq(50000 / HZ, + __raw_writeq((50000 / HZ) - 1, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT))); #else - __raw_writeq(1000000 / HZ, + __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT))); #endif @@ -103,7 +131,7 @@ void sb1250_timer_interrupt(struct pt_regs *regs) int cpu = smp_processor_id(); int irq = K_INT_TIMER_0 + cpu; - /* Reset the timer */ + /* ACK interrupt */ ____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG))); @@ -122,15 +150,26 @@ void sb1250_timer_interrupt(struct pt_regs *regs) } /* - * We use our own do_gettimeoffset() instead of the generic one, - * because the generic one does not work for SMP case. - * In addition, since we use general timer 0 for system time, - * we can get accurate intra-jiffy offset without calibration. + * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over + * again. There's no easy way to set to a specific value so store init value + * in hpt_offset and subtract each time. + * + * Note: Timer isn't full 32bits so shift it into the upper part making + * it appear to run at a higher frequency. */ -unsigned long sb1250_gettimeoffset(void) +static unsigned int sb1250_hpt_read(void) { - unsigned long count = - __raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT))); + unsigned int count; - return 1000000/HZ - count; - } + count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT)))); + + count = (SB1250_HPT_VALUE - count) << SB1250_HPT_SHIFT; + + return count - hpt_offset; +} + +static void sb1250_hpt_init(unsigned int count) +{ + hpt_offset = count; + return; +} diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c index b614ca0ddb6..b661d2425a3 100644 --- a/arch/mips/sibyte/swarm/setup.c +++ b/arch/mips/sibyte/swarm/setup.c @@ -70,6 +70,12 @@ const char *get_system_type(void) return "SiByte " SIBYTE_BOARD_NAME; } +void __init swarm_time_init(void) +{ + /* Setup HPT */ + sb1250_hpt_setup(); +} + void __init swarm_timer_setup(struct irqaction *irq) { /* @@ -109,6 +115,7 @@ void __init plat_setup(void) panic_timeout = 5; /* For debug. */ + board_time_init = swarm_time_init; board_timer_setup = swarm_timer_setup; board_be_handler = swarm_be_handler; diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index a834f9e0bbb..dfba81719de 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -580,7 +580,7 @@ config KEXEC strongly in flux, so no good recommendation can be made. config CRASH_DUMP - bool "kernel crash dumps (EXPERIMENTAL)" + bool "Build a kdump crash kernel (EXPERIMENTAL)" depends on PPC_MULTIPLATFORM && PPC64 && EXPERIMENTAL help Build a kernel suitable for use as a kdump capture kernel. diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S index e0192c26037..70e65b13e03 100644 --- a/arch/powerpc/boot/crt0.S +++ b/arch/powerpc/boot/crt0.S @@ -45,7 +45,8 @@ _zimage_start: bdnz 2b /* Do a cache flush for our text, in case OF didn't */ -3: lis r9,_start@h +3: lis r9,_start@ha + addi r9,r9,_start@l add r9,r0,r9 lis r8,_etext@ha addi r8,r8,_etext@l @@ -53,7 +54,7 @@ _zimage_start: 4: dcbf r0,r9 icbi r0,r9 addi r9,r9,0x20 - cmplwi 0,r9,8 + cmplw cr0,r9,r8 blt 4b sync isync diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index 063b84f2cbe..3c2acab6373 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc5 -# Tue Dec 20 15:59:26 2005 +# Linux kernel version: 2.6.16-rc6 +# Wed Mar 15 16:19:48 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -16,6 +16,10 @@ CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +# CONFIG_DEFAULT_UIMAGE is not set # # Processor support @@ -33,7 +37,6 @@ CONFIG_NR_CPUS=4 # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -48,8 +51,6 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" @@ -58,8 +59,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -68,8 +71,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -111,7 +116,6 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set CONFIG_PPC_CELL=y -CONFIG_PPC_OF=y # CONFIG_U3_DART is not set CONFIG_PPC_RTAS=y # CONFIG_RTAS_ERROR_LOGGING is not set @@ -120,11 +124,15 @@ CONFIG_RTAS_FLASH=y CONFIG_MMIO_NVRAM=y CONFIG_CELL_IIC=y # CONFIG_PPC_MPC106 is not set -# CONFIG_GENERIC_TBSYNC is not set # CONFIG_CPU_FREQ is not set # CONFIG_WANT_EARLY_SERIAL is not set # +# Cell Broadband Engine options +# +CONFIG_SPU_FS=y + +# # Kernel options # # CONFIG_HZ_100 is not set @@ -140,6 +148,7 @@ CONFIG_BINFMT_ELF=y CONFIG_FORCE_MAX_ZONEORDER=13 # CONFIG_IOMMU_VMERGE is not set CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y # CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y @@ -191,6 +200,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -234,6 +244,25 @@ CONFIG_NETFILTER=y # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IP: Netfilter Configuration @@ -251,37 +280,23 @@ CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_MATCH_POLICY=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -297,11 +312,8 @@ CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m @@ -311,7 +323,6 @@ CONFIG_IP_NF_ARP_MANGLE=m # # CONFIG_IP6_NF_QUEUE is not set # CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP6_NF_TARGET_NFQUEUE is not set # # DCCP Configuration (EXPERIMENTAL) @@ -322,6 +333,11 @@ CONFIG_IP_NF_ARP_MANGLE=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -540,9 +556,11 @@ CONFIG_E1000=m # CONFIG_R8169 is not set # CONFIG_SIS190 is not set CONFIG_SKGE=m +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_SPIDER_NET=y # CONFIG_MV643XX_ETH is not set # @@ -628,13 +646,16 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINK is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set @@ -646,6 +667,7 @@ CONFIG_SERIAL_NONSTANDARD=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -756,6 +778,12 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -827,7 +855,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # @@ -847,6 +875,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -886,6 +915,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -951,6 +981,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1021,18 +1052,20 @@ CONFIG_TEXTSEARCH_FSM=m # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=15 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set +# CONFIG_FORCED_INLINING is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -1040,6 +1073,11 @@ CONFIG_DEBUGGER=y # CONFIG_XMON is not set CONFIG_IRQSTACKS=y # CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set # # Security options diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index c775027947f..1816a46742f 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc5 -# Tue Dec 20 15:59:32 2005 +# Linux kernel version: 2.6.16-rc6 +# Wed Mar 15 16:19:52 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -16,6 +16,10 @@ CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +# CONFIG_DEFAULT_UIMAGE is not set # # Processor support @@ -33,7 +37,6 @@ CONFIG_NR_CPUS=32 # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -49,8 +52,6 @@ CONFIG_POSIX_MQUEUE=y CONFIG_SYSCTL=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set @@ -60,8 +61,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -70,8 +73,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -113,7 +118,6 @@ CONFIG_PPC_ISERIES=y # CONFIG_MMIO_NVRAM is not set CONFIG_IBMVIO=y # CONFIG_PPC_MPC106 is not set -# CONFIG_GENERIC_TBSYNC is not set # CONFIG_CPU_FREQ is not set # CONFIG_WANT_EARLY_SERIAL is not set @@ -183,6 +187,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -220,6 +225,28 @@ CONFIG_NETFILTER=y # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IP: Netfilter Configuration @@ -237,39 +264,23 @@ CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_MATCH_POLICY=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -285,13 +296,9 @@ CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m @@ -305,6 +312,11 @@ CONFIG_IP_NF_ARP_MANGLE=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -451,13 +463,7 @@ CONFIG_SCSI_IBMVSCSI=m # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -574,6 +580,7 @@ CONFIG_E1000=m # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -723,6 +730,12 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_I2C is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -788,7 +801,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # @@ -825,6 +838,7 @@ CONFIG_XFS_EXPORT=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -865,6 +879,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -993,31 +1008,36 @@ CONFIG_TEXTSEARCH_FSM=m # # Instrumentation Support # -CONFIG_PROFILING=y -CONFIG_OPROFILE=y # CONFIG_KPROBES is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set +# CONFIG_FORCED_INLINING is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUGGER is not set CONFIG_IRQSTACKS=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set # # Security options diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig index 68194c03f6d..80a0db43aeb 100644 --- a/arch/powerpc/configs/maple_defconfig +++ b/arch/powerpc/configs/maple_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc5 -# Tue Dec 20 15:59:36 2005 +# Linux kernel version: 2.6.16-rc6 +# Wed Mar 15 16:19:54 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -16,6 +16,10 @@ CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +CONFIG_GENERIC_TBSYNC=y +# CONFIG_DEFAULT_UIMAGE is not set # # Processor support @@ -32,7 +36,6 @@ CONFIG_NR_CPUS=2 # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -47,8 +50,6 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set @@ -58,8 +59,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -68,8 +71,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -111,14 +116,12 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_PMAC is not set CONFIG_PPC_MAPLE=y # CONFIG_PPC_CELL is not set -CONFIG_PPC_OF=y CONFIG_U3_DART=y CONFIG_MPIC=y # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set CONFIG_MPIC_BROKEN_U3=y # CONFIG_PPC_MPC106 is not set -CONFIG_GENERIC_TBSYNC=y # CONFIG_CPU_FREQ is not set # CONFIG_WANT_EARLY_SERIAL is not set @@ -138,6 +141,7 @@ CONFIG_BINFMT_ELF=y CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y # CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y @@ -189,6 +193,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -226,6 +231,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -461,6 +471,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -553,6 +564,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -651,6 +663,12 @@ CONFIG_I2C_AMD8111=y # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -738,12 +756,14 @@ CONFIG_USB_UHCI_HCD=y # may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set @@ -757,6 +777,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -797,6 +818,7 @@ CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ANYDATA is not set # CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_CP2101 is not set CONFIG_USB_SERIAL_CYPRESS_M8=m @@ -873,7 +895,7 @@ CONFIG_USB_EZUSB=y # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # @@ -891,6 +913,7 @@ CONFIG_JBD=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -927,6 +950,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -988,6 +1012,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -1053,18 +1078,20 @@ CONFIG_ZLIB_INFLATE=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set CONFIG_DEBUG_SLAB=y +# CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set +# CONFIG_FORCED_INLINING is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y @@ -1073,6 +1100,11 @@ CONFIG_XMON=y CONFIG_XMON_DEFAULT=y # CONFIG_IRQSTACKS is not set CONFIG_BOOTX_TEXT=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set # # Security options diff --git a/arch/powerpc/configs/mpc834x_sys_defconfig b/arch/powerpc/configs/mpc834x_sys_defconfig index 3bff761965c..5078b0441d6 100644 --- a/arch/powerpc/configs/mpc834x_sys_defconfig +++ b/arch/powerpc/configs/mpc834x_sys_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-g461d4edf-dirty -# Fri Jan 13 11:01:47 2006 +# Linux kernel version: 2.6.16-rc6 +# Wed Mar 15 16:19:56 2006 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -43,7 +43,6 @@ CONFIG_PPC_STD_MMU_32=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -189,6 +188,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -226,6 +226,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -511,6 +516,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -615,6 +621,12 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -632,6 +644,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set @@ -716,7 +729,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # @@ -826,6 +839,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -899,13 +913,3 @@ CONFIG_CRYPTO_DES=y # # Hardware crypto devices # - -# -# SEC2.x Options -# -CONFIG_MPC8349E_SEC2x=y - -# -# SEC2.x Test Options -# -CONFIG_MPC8349E_SEC2xTEST=y diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index 2ace57d1e33..57a027971d6 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15 -# Sat Jan 14 16:26:08 2006 +# Linux kernel version: 2.6.16-rc6 +# Wed Mar 15 16:21:32 2006 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -17,8 +17,8 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y # CONFIG_PPC_UDBG_16550 is not set -# CONFIG_CRASH_DUMP is not set # CONFIG_GENERIC_TBSYNC is not set +# CONFIG_DEFAULT_UIMAGE is not set # # Processor support @@ -43,7 +43,6 @@ CONFIG_PPC_STD_MMU_32=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -236,6 +235,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -271,6 +271,25 @@ CONFIG_NETFILTER=y # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IP: Netfilter Configuration @@ -288,37 +307,22 @@ CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m CONFIG_IP_NF_MATCH_OWNER=m -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set -# CONFIG_IP_NF_MATCH_REALM is not set -# CONFIG_IP_NF_MATCH_SCTP is not set -CONFIG_IP_NF_MATCH_DCCP=m -# CONFIG_IP_NF_MATCH_COMMENT is not set -# CONFIG_IP_NF_MATCH_HASHLIMIT is not set -CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -# CONFIG_IP_NF_TARGET_LOG is not set +CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m -# CONFIG_IP_NF_TARGET_NFQUEUE is not set CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -331,9 +335,12 @@ CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_NAT_TFTP=m CONFIG_IP_NF_NAT_AMANDA=m CONFIG_IP_NF_NAT_PPTP=m -# CONFIG_IP_NF_MANGLE is not set +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m @@ -360,6 +367,11 @@ CONFIG_IP_DCCP_TFRC_LIB=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -377,6 +389,7 @@ CONFIG_IP_DCCP_TFRC_LIB=m # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -568,7 +581,6 @@ CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set CONFIG_BLK_DEV_PDC202XX_NEW=y -# CONFIG_PDC202XX_FORCE is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SLC90E66 is not set @@ -654,8 +666,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -991,6 +1002,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=m CONFIG_SERIAL_PMACZILOG=m +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -1098,6 +1110,12 @@ CONFIG_I2C_POWERMAC=y # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -1348,6 +1366,7 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +CONFIG_USB_HIDINPUT_POWERBOOK=y # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set @@ -1488,7 +1507,7 @@ CONFIG_USB_EZUSB=y # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # @@ -1609,6 +1628,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -1692,6 +1712,7 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_FORCED_INLINING is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUGGER=y CONFIG_XMON=y diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 0362a70aa97..395e4984778 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -407,7 +407,7 @@ CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_SL82C105=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 840aad43a98..c9a660e4c2d 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -92,7 +92,6 @@ int main(void) DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count)); - DEFINE(TI_SIGFRAME, offsetof(struct thread_info, nvgprs_frame)); DEFINE(TI_TASK, offsetof(struct thread_info, task)); #ifdef CONFIG_PPC32 DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain)); diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 10696456a4c..e4e81374cb9 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -53,8 +53,10 @@ extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec); PPC_FEATURE_HAS_MMU) #define COMMON_USER_PPC64 (COMMON_USER | PPC_FEATURE_64) #define COMMON_USER_POWER4 (COMMON_USER_PPC64 | PPC_FEATURE_POWER4) -#define COMMON_USER_POWER5 (COMMON_USER_PPC64 | PPC_FEATURE_POWER5) -#define COMMON_USER_POWER5_PLUS (COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS) +#define COMMON_USER_POWER5 (COMMON_USER_PPC64 | PPC_FEATURE_POWER5 |\ + PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP) +#define COMMON_USER_POWER5_PLUS (COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS|\ + PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP) #define COMMON_USER_BOOKE (PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \ PPC_FEATURE_BOOKE) @@ -267,7 +269,8 @@ struct cpu_spec cpu_specs[] = { .cpu_name = "Cell Broadband Engine", .cpu_features = CPU_FTRS_CELL, .cpu_user_features = COMMON_USER_PPC64 | - PPC_FEATURE_CELL | PPC_FEATURE_HAS_ALTIVEC_COMP, + PPC_FEATURE_CELL | PPC_FEATURE_HAS_ALTIVEC_COMP | + PPC_FEATURE_SMT, .icache_bsize = 128, .dcache_bsize = 128, .cpu_setup = __setup_cpu_be, diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index f20a67261ec..4827ca1ec89 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -227,7 +227,7 @@ ret_from_syscall: MTMSRD(r10) lwz r9,TI_FLAGS(r12) li r8,-_LAST_ERRNO - andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL|_TIF_RESTORE_SIGMASK) + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK) bne- syscall_exit_work cmplw 0,r3,r8 blt+ syscall_exit_cont @@ -287,8 +287,10 @@ syscall_dotrace: syscall_exit_work: andi. r0,r9,_TIF_RESTOREALL - bne- 2f - cmplw 0,r3,r8 + beq+ 0f + REST_NVGPRS(r1) + b 2f +0: cmplw 0,r3,r8 blt+ 1f andi. r0,r9,_TIF_NOERROR bne- 1f @@ -302,9 +304,7 @@ syscall_exit_work: 2: andi. r0,r9,(_TIF_PERSYSCALL_MASK) beq 4f - /* Clear per-syscall TIF flags if any are set, but _leave_ - _TIF_SAVE_NVGPRS set in r9 since we haven't dealt with that - yet. */ + /* Clear per-syscall TIF flags if any are set. */ li r11,_TIF_PERSYSCALL_MASK addi r12,r12,TI_FLAGS @@ -318,8 +318,13 @@ syscall_exit_work: subi r12,r12,TI_FLAGS 4: /* Anything which requires enabling interrupts? */ - andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SAVE_NVGPRS) - beq 7f + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) + beq ret_from_except + + /* Re-enable interrupts */ + ori r10,r10,MSR_EE + SYNC + MTMSRD(r10) /* Save NVGPRS if they're not saved already */ lwz r4,_TRAP(r1) @@ -328,71 +333,11 @@ syscall_exit_work: SAVE_NVGPRS(r1) li r4,0xc00 stw r4,_TRAP(r1) - - /* Re-enable interrupts */ -5: ori r10,r10,MSR_EE - SYNC - MTMSRD(r10) - - andi. r0,r9,_TIF_SAVE_NVGPRS - bne save_user_nvgprs - -save_user_nvgprs_cont: - andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) - beq 7f - +5: addi r3,r1,STACK_FRAME_OVERHEAD bl do_syscall_trace_leave - REST_NVGPRS(r1) - -6: lwz r3,GPR3(r1) - LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */ - SYNC - MTMSRD(r10) /* disable interrupts again */ - rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */ - lwz r9,TI_FLAGS(r12) -7: - andi. r0,r9,_TIF_NEED_RESCHED - bne 8f - lwz r5,_MSR(r1) - andi. r5,r5,MSR_PR - beq ret_from_except - andi. r0,r9,_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK - beq ret_from_except - b do_user_signal -8: - ori r10,r10,MSR_EE - SYNC - MTMSRD(r10) /* re-enable interrupts */ - bl schedule - b 6b - -save_user_nvgprs: - lwz r8,TI_SIGFRAME(r12) - -.macro savewords start, end - 1: stw \start,4*(\start)(r8) - .section __ex_table,"a" - .align 2 - .long 1b,save_user_nvgprs_fault - .previous - .if \end - \start - savewords "(\start+1)",\end - .endif -.endm - savewords 14,31 - b save_user_nvgprs_cont - - -save_user_nvgprs_fault: - li r3,11 /* SIGSEGV */ - lwz r4,TI_TASK(r12) - bl force_sigsegv + b ret_from_except_full - rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */ - lwz r9,TI_FLAGS(r12) - b save_user_nvgprs_cont - #ifdef SHOW_SYSCALLS do_show_syscall: #ifdef SHOW_SYSCALLS_TASK @@ -490,6 +435,14 @@ ppc_clone: stw r0,_TRAP(r1) /* register set saved */ b sys_clone + .globl ppc_swapcontext +ppc_swapcontext: + SAVE_NVGPRS(r1) + lwz r0,_TRAP(r1) + rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */ + stw r0,_TRAP(r1) /* register set saved */ + b sys_swapcontext + /* * Top-level page fault handling. * This is in assembler because if do_page_fault tells us that @@ -683,7 +636,7 @@ user_exc_return: /* r10 contains MSR_KERNEL here */ /* Check current_thread_info()->flags */ rlwinm r9,r1,0,0,(31-THREAD_SHIFT) lwz r9,TI_FLAGS(r9) - andi. r0,r9,(_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL|_TIF_RESTORE_SIGMASK) + andi. r0,r9,(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NEED_RESCHED) bne do_work restore_user: diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 388f861b8ed..24be0cf86d7 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -160,7 +160,7 @@ syscall_exit: mtmsrd r10,1 ld r9,TI_FLAGS(r12) li r11,-_LAST_ERRNO - andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL|_TIF_SAVE_NVGPRS|_TIF_NOERROR|_TIF_RESTORE_SIGMASK) + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK) bne- syscall_exit_work cmpld r3,r11 ld r5,_CCR(r1) @@ -216,8 +216,10 @@ syscall_exit_work: If TIF_NOERROR is set, just save r3 as it is. */ andi. r0,r9,_TIF_RESTOREALL - bne- 2f - cmpld r3,r11 /* r10 is -LAST_ERRNO */ + beq+ 0f + REST_NVGPRS(r1) + b 2f +0: cmpld r3,r11 /* r10 is -LAST_ERRNO */ blt+ 1f andi. r0,r9,_TIF_NOERROR bne- 1f @@ -229,9 +231,7 @@ syscall_exit_work: 2: andi. r0,r9,(_TIF_PERSYSCALL_MASK) beq 4f - /* Clear per-syscall TIF flags if any are set, but _leave_ - _TIF_SAVE_NVGPRS set in r9 since we haven't dealt with that - yet. */ + /* Clear per-syscall TIF flags if any are set. */ li r11,_TIF_PERSYSCALL_MASK addi r12,r12,TI_FLAGS @@ -240,10 +240,9 @@ syscall_exit_work: stdcx. r10,0,r12 bne- 3b subi r12,r12,TI_FLAGS - -4: bl .save_nvgprs - /* Anything else left to do? */ - andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SAVE_NVGPRS) + +4: /* Anything else left to do? */ + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) beq .ret_from_except_lite /* Re-enable interrupts */ @@ -251,26 +250,10 @@ syscall_exit_work: ori r10,r10,MSR_EE mtmsrd r10,1 - andi. r0,r9,_TIF_SAVE_NVGPRS - bne save_user_nvgprs - - /* If tracing, re-enable interrupts and do it */ -save_user_nvgprs_cont: - andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) - beq 5f - + bl .save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl .do_syscall_trace_leave - REST_NVGPRS(r1) - clrrdi r12,r1,THREAD_SHIFT - - /* Disable interrupts again and handle other work if any */ -5: mfmsr r10 - rldicl r10,r10,48,1 - rotldi r10,r10,16 - mtmsrd r10,1 - - b .ret_from_except_lite + b .ret_from_except /* Save non-volatile GPRs, if not already saved. */ _GLOBAL(save_nvgprs) @@ -282,51 +265,6 @@ _GLOBAL(save_nvgprs) std r0,_TRAP(r1) blr - -save_user_nvgprs: - ld r10,TI_SIGFRAME(r12) - andi. r0,r9,_TIF_32BIT - beq- save_user_nvgprs_64 - - /* 32-bit save to userspace */ - -.macro savewords start, end - 1: stw \start,4*(\start)(r10) - .section __ex_table,"a" - .align 3 - .llong 1b,save_user_nvgprs_fault - .previous - .if \end - \start - savewords "(\start+1)",\end - .endif -.endm - savewords 14,31 - b save_user_nvgprs_cont - -save_user_nvgprs_64: - /* 64-bit save to userspace */ - -.macro savelongs start, end - 1: std \start,8*(\start)(r10) - .section __ex_table,"a" - .align 3 - .llong 1b,save_user_nvgprs_fault - .previous - .if \end - \start - savelongs "(\start+1)",\end - .endif -.endm - savelongs 14,31 - b save_user_nvgprs_cont - -save_user_nvgprs_fault: - li r3,11 /* SIGSEGV */ - ld r4,TI_TASK(r12) - bl .force_sigsegv - - clrrdi r12,r1,THREAD_SHIFT - ld r9,TI_FLAGS(r12) - b save_user_nvgprs_cont /* * The sigsuspend and rt_sigsuspend system calls can call do_signal @@ -352,6 +290,16 @@ _GLOBAL(ppc_clone) bl .sys_clone b syscall_exit +_GLOBAL(ppc32_swapcontext) + bl .save_nvgprs + bl .compat_sys_swapcontext + b syscall_exit + +_GLOBAL(ppc64_swapcontext) + bl .save_nvgprs + bl .sys_swapcontext + b syscall_exit + _GLOBAL(ret_from_fork) bl .schedule_tail REST_NVGPRS(r1) diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 11f2cd5af7d..9b65029dd2a 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -1537,6 +1537,9 @@ _STATIC(__boot_from_prom) mr r28,r6 mr r27,r7 + /* Align the stack to 16-byte boundary for broken yaboot */ + rldicr r1,r1,0,59 + /* Make sure we are running in 64 bits mode */ bl .enable_64b_mode diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index c367520bc1c..ba92bab7cc2 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -589,7 +589,6 @@ void __devinit scan_phb(struct pci_controller *hose) #endif /* CONFIG_PPC_MULTIPLATFORM */ if (mode == PCI_PROBE_NORMAL) hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); - pci_bus_add_devices(bus); } static int __init pcibios_init(void) @@ -608,8 +607,10 @@ static int __init pcibios_init(void) printk("PCI: Probing PCI hardware\n"); /* Scan all of the recorded PCI controllers. */ - list_for_each_entry_safe(hose, tmp, &hose_list, list_node) + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { scan_phb(hose); + pci_bus_add_devices(hose->bus); + } #ifndef CONFIG_PPC_ISERIES if (pci_probe_only) diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 8a731ea877b..63ecbec0520 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -110,15 +110,6 @@ EXPORT_SYMBOL(_insw_ns); EXPORT_SYMBOL(_outsw_ns); EXPORT_SYMBOL(_insl_ns); EXPORT_SYMBOL(_outsl_ns); -EXPORT_SYMBOL(ioremap); -#ifdef CONFIG_44x -EXPORT_SYMBOL(ioremap64); -#endif -EXPORT_SYMBOL(__ioremap); -EXPORT_SYMBOL(iounmap); -#ifdef CONFIG_PPC32 -EXPORT_SYMBOL(ioremap_bot); /* aka VMALLOC_END */ -#endif #if defined(CONFIG_PPC32) && (defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)) EXPORT_SYMBOL(ppc_ide_md); @@ -161,7 +152,6 @@ EXPORT_SYMBOL(__flush_icache_range); EXPORT_SYMBOL(flush_dcache_range); #ifdef CONFIG_SMP -EXPORT_SYMBOL(smp_call_function); #ifdef CONFIG_PPC32 EXPORT_SYMBOL(smp_hw_index); #endif diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index d34fe537400..813c2cd194c 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -978,7 +978,7 @@ static void __init prom_init_mem(void) if (size == 0) continue; prom_debug(" %x %x\n", base, size); - if (base == 0) + if (base == 0 && (RELOC(of_platform) & PLATFORM_LPAR)) RELOC(rmo_top) = size; if ((base + size) > RELOC(ram_top)) RELOC(ram_top) = base + size; diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 400793c7130..bcb83574335 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -561,10 +561,7 @@ void do_syscall_trace_leave(struct pt_regs *regs) regs->result); if ((test_thread_flag(TIF_SYSCALL_TRACE) -#ifdef CONFIG_PPC64 - || test_thread_flag(TIF_SINGLESTEP) -#endif - ) + || test_thread_flag(TIF_SINGLESTEP)) && (current->ptrace & PT_PTRACED)) do_syscall_trace(); } diff --git a/arch/powerpc/kernel/rtas-rtc.c b/arch/powerpc/kernel/rtas-rtc.c index 635d3b9a881..34d073fb609 100644 --- a/arch/powerpc/kernel/rtas-rtc.c +++ b/arch/powerpc/kernel/rtas-rtc.c @@ -52,7 +52,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm) error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret); if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { if (in_interrupt() && printk_ratelimit()) { - memset(&rtc_tm, 0, sizeof(struct rtc_time)); + memset(rtc_tm, 0, sizeof(struct rtc_time)); printk(KERN_WARNING "error: reading clock" " would delay interrupt\n"); return; /* delay not allowed */ diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index 5579f655991..7442775ef2a 100644 --- a/arch/powerpc/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -280,8 +280,7 @@ static int phb_set_bus_ranges(struct device_node *dev, return 0; } -static int __devinit setup_phb(struct device_node *dev, - struct pci_controller *phb) +int __devinit setup_phb(struct device_node *dev, struct pci_controller *phb) { if (is_python(dev)) python_countermeasures(dev); @@ -359,27 +358,6 @@ unsigned long __init find_and_init_phbs(void) return 0; } -struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) -{ - struct pci_controller *phb; - int primary; - - primary = list_empty(&hose_list); - phb = pcibios_alloc_controller(dn); - if (!phb) - return NULL; - setup_phb(dn, phb); - pci_process_bridge_OF_ranges(phb, dn, primary); - - pci_setup_phb_io_dynamic(phb, primary); - - pci_devs_phb_init_dynamic(phb); - scan_phb(phb); - - return phb; -} -EXPORT_SYMBOL(init_phb_dynamic); - /* RPA-specific bits for removing PHBs */ int pcibios_remove_root_bus(struct pci_controller *phb) { diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index bd837b5dbf0..d7a4e814974 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -151,10 +151,7 @@ static inline int save_general_regs(struct pt_regs *regs, elf_greg_t64 *gregs = (elf_greg_t64 *)regs; int i; - if (!FULL_REGS(regs)) { - set_thread_flag(TIF_SAVE_NVGPRS); - current_thread_info()->nvgprs_frame = frame->mc_gregs; - } + WARN_ON(!FULL_REGS(regs)); for (i = 0; i <= PT_RESULT; i ++) { if (i == 14 && !FULL_REGS(regs)) @@ -215,15 +212,7 @@ static inline int get_old_sigaction(struct k_sigaction *new_ka, static inline int save_general_regs(struct pt_regs *regs, struct mcontext __user *frame) { - if (!FULL_REGS(regs)) { - /* Zero out the unsaved GPRs to avoid information - leak, and set TIF_SAVE_NVGPRS to ensure that the - registers do actually get saved later. */ - memset(®s->gpr[14], 0, 18 * sizeof(unsigned long)); - current_thread_info()->nvgprs_frame = &frame->mc_gregs; - set_thread_flag(TIF_SAVE_NVGPRS); - } - + WARN_ON(!FULL_REGS(regs)); return __copy_to_user(&frame->mc_gregs, regs, GP_REGS_SIZE); } @@ -826,8 +815,8 @@ static int do_setcontext(struct ucontext __user *ucp, struct pt_regs *regs, int } long sys_swapcontext(struct ucontext __user *old_ctx, - struct ucontext __user *new_ctx, - int ctx_size, int r6, int r7, int r8, struct pt_regs *regs) + struct ucontext __user *new_ctx, + int ctx_size, int r6, int r7, int r8, struct pt_regs *regs) { unsigned char tmp; diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index 497a5d3df35..4324f8a8ba2 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -118,14 +118,7 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, err |= __put_user(0, &sc->v_regs); #endif /* CONFIG_ALTIVEC */ err |= __put_user(&sc->gp_regs, &sc->regs); - if (!FULL_REGS(regs)) { - /* Zero out the unsaved GPRs to avoid information - leak, and set TIF_SAVE_NVGPRS to ensure that the - registers do actually get saved later. */ - memset(®s->gpr[14], 0, 18 * sizeof(unsigned long)); - set_thread_flag(TIF_SAVE_NVGPRS); - current_thread_info()->nvgprs_frame = &sc->gp_regs; - } + WARN_ON(!FULL_REGS(regs)); err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE); err |= __copy_to_user(&sc->fp_regs, ¤t->thread.fpr, FP_REGS_SIZE); err |= __put_user(signr, &sc->signal); diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S index 8a9f994ed91..1ad55f0466f 100644 --- a/arch/powerpc/kernel/systbl.S +++ b/arch/powerpc/kernel/systbl.S @@ -288,7 +288,7 @@ COMPAT_SYS(clock_settime) COMPAT_SYS(clock_gettime) COMPAT_SYS(clock_getres) COMPAT_SYS(clock_nanosleep) -COMPAT_SYS(swapcontext) +SYSX(ppc64_swapcontext,ppc32_swapcontext,ppc_swapcontext) COMPAT_SYS(tgkill) COMPAT_SYS(utimes) COMPAT_SYS(statfs64) diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 2a7ddc57937..86f7e3d154d 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -283,9 +283,9 @@ static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec, * the two values of tb_update_count match and are even then the * tb_to_xs and stamp_xsec values are consistent. If not, then it * loops back and reads them again until this criteria is met. + * We expect the caller to have done the first increment of + * vdso_data->tb_update_count already. */ - ++(vdso_data->tb_update_count); - smp_wmb(); vdso_data->tb_orig_stamp = new_tb_stamp; vdso_data->stamp_xsec = new_stamp_xsec; vdso_data->tb_to_xs = new_tb_to_xs; @@ -310,20 +310,15 @@ static __inline__ void timer_recalc_offset(u64 cur_tb) unsigned long offset; u64 new_stamp_xsec; u64 tlen, t2x; + u64 tb, xsec_old, xsec_new; + struct gettimeofday_vars *varp; if (__USE_RTC()) return; tlen = current_tick_length(); offset = cur_tb - do_gtod.varp->tb_orig_stamp; - if (tlen == last_tick_len && offset < 0x80000000u) { - /* check that we're still in sync; if not, resync */ - struct timeval tv; - __do_gettimeofday(&tv, cur_tb); - if (tv.tv_sec <= xtime.tv_sec && - (tv.tv_sec < xtime.tv_sec || - tv.tv_usec * 1000 <= xtime.tv_nsec)) - return; - } + if (tlen == last_tick_len && offset < 0x80000000u) + return; if (tlen != last_tick_len) { t2x = mulhdu(tlen << TICKLEN_SHIFT, ticklen_to_xs); last_tick_len = tlen; @@ -332,6 +327,21 @@ static __inline__ void timer_recalc_offset(u64 cur_tb) new_stamp_xsec = (u64) xtime.tv_nsec * XSEC_PER_SEC; do_div(new_stamp_xsec, 1000000000); new_stamp_xsec += (u64) xtime.tv_sec * XSEC_PER_SEC; + + ++vdso_data->tb_update_count; + smp_mb(); + + /* + * Make sure time doesn't go backwards for userspace gettimeofday. + */ + tb = get_tb(); + varp = do_gtod.varp; + xsec_old = mulhdu(tb - varp->tb_orig_stamp, varp->tb_to_xs) + + varp->stamp_xsec; + xsec_new = mulhdu(tb - cur_tb, t2x) + new_stamp_xsec; + if (xsec_new < xsec_old) + new_stamp_xsec += xsec_old - xsec_new; + update_gtod(cur_tb, new_stamp_xsec, t2x); } @@ -564,6 +574,10 @@ int do_settimeofday(struct timespec *tv) } #endif + /* Make userspace gettimeofday spin until we're done. */ + ++vdso_data->tb_update_count; + smp_mb(); + /* * Subtract off the number of nanoseconds since the * beginning of the last tick. @@ -724,10 +738,16 @@ void __init time_init(void) * It is computed as: * ticklen_to_xs = 2^N / (tb_ticks_per_jiffy * 1e9) * where N = 64 + 20 - TICKLEN_SCALE - TICKLEN_SHIFT - * so as to give the result as a 0.64 fixed-point fraction. + * which turns out to be N = 51 - SHIFT_HZ. + * This gives the result as a 0.64 fixed-point fraction. + * That value is reduced by an offset amounting to 1 xsec per + * 2^31 timebase ticks to avoid problems with time going backwards + * by 1 xsec when we do timer_recalc_offset due to losing the + * fractional xsec. That offset is equal to ppc_tb_freq/2^51 + * since there are 2^20 xsec in a second. */ - div128_by_32(1ULL << (64 + 20 - TICKLEN_SCALE - TICKLEN_SHIFT), 0, - tb_ticks_per_jiffy, &res); + div128_by_32((1ULL << 51) - ppc_tb_freq, 0, + tb_ticks_per_jiffy << SHIFT_HZ, &res); div128_by_32(res.result_high, res.result_low, NSEC_PER_SEC, &res); ticklen_to_xs = res.result_low; diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 7509aa6474f..98660aedeeb 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -814,6 +814,8 @@ void __kprobes program_check_exception(struct pt_regs *regs) return; } + local_irq_enable(); + /* Try to emulate it if we should. */ if (reason & (REASON_ILLEGAL | REASON_PRIVILEGED)) { switch (emulate_instruction(regs)) { diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index f0c47dab090..04f7df39ffb 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -182,8 +182,8 @@ static struct page * vdso_vma_nopage(struct vm_area_struct * vma, unsigned long offset = address - vma->vm_start; struct page *pg; #ifdef CONFIG_PPC64 - void *vbase = test_thread_flag(TIF_32BIT) ? - vdso32_kbase : vdso64_kbase; + void *vbase = (vma->vm_mm->task_size > TASK_SIZE_USER32) ? + vdso64_kbase : vdso32_kbase; #else void *vbase = vdso32_kbase; #endif diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S index ccaeda5136d..4ee871f1cad 100644 --- a/arch/powerpc/kernel/vdso64/gettimeofday.S +++ b/arch/powerpc/kernel/vdso64/gettimeofday.S @@ -225,9 +225,9 @@ V_FUNCTION_BEGIN(__do_get_xsec) .cfi_startproc /* check for update count & load values */ 1: ld r8,CFG_TB_UPDATE_COUNT(r3) - andi. r0,r4,1 /* pending update ? loop */ + andi. r0,r8,1 /* pending update ? loop */ bne- 1b - xor r0,r4,r4 /* create dependency */ + xor r0,r8,r8 /* create dependency */ add r3,r3,r0 /* Get TB & offset it */ diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index b1f614c612d..e9d589eefc1 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -169,7 +169,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, #ifdef CONFIG_PPC_ISERIES if (_machine == PLATFORM_ISERIES_LPAR) ret = iSeries_hpte_insert(hpteg, va, - virt_to_abs(paddr), + __pa(vaddr), tmp_mode, HPTE_V_BOLTED, psize); diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index f4e5ac12261..d296eb6b454 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -37,6 +37,7 @@ unsigned long ioremap_base; unsigned long ioremap_bot; +EXPORT_SYMBOL(ioremap_bot); /* aka VMALLOC_END */ int io_bat_index; #if defined(CONFIG_6xx) || defined(CONFIG_POWER3) @@ -153,6 +154,7 @@ ioremap64(unsigned long long addr, unsigned long size) { return __ioremap(addr, size, _PAGE_NO_CACHE); } +EXPORT_SYMBOL(ioremap64); void __iomem * ioremap(phys_addr_t addr, unsigned long size) @@ -162,6 +164,7 @@ ioremap(phys_addr_t addr, unsigned long size) return ioremap64(addr64, size); } #endif /* CONFIG_PHYS_64BIT */ +EXPORT_SYMBOL(ioremap); void __iomem * __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags) @@ -247,6 +250,7 @@ __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags) out: return (void __iomem *) (v + ((unsigned long)addr & ~PAGE_MASK)); } +EXPORT_SYMBOL(__ioremap); void iounmap(volatile void __iomem *addr) { @@ -259,6 +263,7 @@ void iounmap(volatile void __iomem *addr) if (addr > high_memory && (unsigned long) addr < ioremap_bot) vunmap((void *) (PAGE_MASK & (unsigned long)addr)); } +EXPORT_SYMBOL(iounmap); void __iomem *ioport_map(unsigned long port, unsigned int len) { diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index 34714d3ea69..bbe794891a2 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -2491,9 +2491,7 @@ found: pmac_mb.model_id = PMAC_TYPE_COMET; iounmap(mach_id_ptr); } -#endif /* CONFIG_POWER4 */ -#ifdef CONFIG_6xx /* Set default value of powersave_nap on machines that support it. * It appears that uninorth rev 3 has a problem with it, we don't * enable it on those. In theory, the flush-on-lock property is @@ -2522,10 +2520,11 @@ found: * NAP mode */ powersave_lowspeed = 1; -#endif /* CONFIG_6xx */ -#ifdef CONFIG_POWER4 + +#else /* CONFIG_POWER4 */ powersave_nap = 1; -#endif +#endif /* CONFIG_POWER4 */ + /* Check for "mobile" machine */ if (model && (strncmp(model, "PowerBook", 9) == 0 || strncmp(model, "iBook", 5) == 0)) diff --git a/arch/powerpc/platforms/powermac/pfunc_base.c b/arch/powerpc/platforms/powermac/pfunc_base.c index 4ffd2a9832a..9b7150f1041 100644 --- a/arch/powerpc/platforms/powermac/pfunc_base.c +++ b/arch/powerpc/platforms/powermac/pfunc_base.c @@ -9,7 +9,12 @@ #include <asm/pmac_feature.h> #include <asm/pmac_pfunc.h> +#undef DEBUG +#ifdef DEBUG #define DBG(fmt...) printk(fmt) +#else +#define DBG(fmt...) +#endif static irqreturn_t macio_gpio_irq(int irq, void *data, struct pt_regs *regs) { diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c index 356a739e52b..4baa75b1d36 100644 --- a/arch/powerpc/platforms/powermac/pfunc_core.c +++ b/arch/powerpc/platforms/powermac/pfunc_core.c @@ -20,7 +20,13 @@ #define LOG_PARSE(fmt...) #define LOG_ERROR(fmt...) printk(fmt) #define LOG_BLOB(t,b,c) + +#undef DEBUG +#ifdef DEBUG #define DBG(fmt...) printk(fmt) +#else +#define DBG(fmt...) +#endif /* Command numbers */ #define PMF_CMD_LIST 0 diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 1955462f408..29c2946f1c7 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -621,10 +621,6 @@ static void __init pmac_init_early(void) /* Probe motherboard chipset */ pmac_feature_init(); - /* We can NAP */ - powersave_nap = 1; - printk(KERN_INFO "Using native/NAP idle loop\n"); - /* Initialize debug stuff */ udbg_scc_init(!!strstr(cmd_line, "sccdbg")); udbg_adb_init(!!strstr(cmd_line, "btextdbg")); diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index 0df2cdcd805..6d64a9bf347 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -435,7 +435,7 @@ struct smp_ops_t psurge_smp_ops = { */ static void (*pmac_tb_freeze)(int freeze); -static unsigned long timebase; +static u64 timebase; static int tb_req; static void smp_core99_give_timebase(void) diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 4e5c8f8d869..a57032cf6f1 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -19,7 +19,7 @@ config SCANLOG depends on RTAS_PROC && PPC_PSERIES config LPARCFG - tristate "LPAR Configuration Data" + bool "LPAR Configuration Data" depends on PPC_PSERIES || PPC_ISERIES help Provide system capacity information via human readable diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 83578313ee7..2ab9dcdfb41 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -893,6 +893,20 @@ void eeh_add_device_tree_early(struct device_node *dn) } EXPORT_SYMBOL_GPL(eeh_add_device_tree_early); +void eeh_add_device_tree_late(struct pci_bus *bus) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + eeh_add_device_late(dev); + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { + struct pci_bus *subbus = dev->subordinate; + if (subbus) + eeh_add_device_tree_late(subbus); + } + } +} + /** * eeh_add_device_late - perform EEH initialization for the indicated pci device * @dev: pci device for which to set up EEH diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c index e3cbba49fd6..b811d5ff92f 100644 --- a/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -37,7 +37,7 @@ static inline const char * pcid_name (struct pci_dev *pdev) { - if (pdev->dev.driver) + if (pdev && pdev->dev.driver) return pdev->dev.driver->name; return ""; } diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index bdaa8aabdaa..44abdeb9ca0 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -27,6 +27,7 @@ #include <linux/pci.h> #include <asm/pci-bridge.h> +#include <asm/ppc-pci.h> static struct pci_bus * find_bus_among_children(struct pci_bus *bus, @@ -106,6 +107,8 @@ pcibios_fixup_new_pci_devices(struct pci_bus *bus, int fix_bus) } } } + + eeh_add_device_tree_late(bus); } EXPORT_SYMBOL_GPL(pcibios_fixup_new_pci_devices); @@ -114,7 +117,6 @@ pcibios_pci_config_bridge(struct pci_dev *dev) { u8 sec_busno; struct pci_bus *child_bus; - struct pci_dev *child_dev; /* Get busno of downstream bus */ pci_read_config_byte(dev, PCI_SECONDARY_BUS, &sec_busno); @@ -129,10 +131,6 @@ pcibios_pci_config_bridge(struct pci_dev *dev) pci_scan_child_bus(child_bus); - list_for_each_entry(child_dev, &child_bus->devices, bus_list) { - eeh_add_device_late(child_dev); - } - /* Fixup new pci devices without touching bus struct */ pcibios_fixup_new_pci_devices(child_bus, 0); @@ -160,18 +158,52 @@ pcibios_add_pci_devices(struct pci_bus * bus) eeh_add_device_tree_early(dn); - /* pci_scan_slot should find all children */ - slotno = PCI_SLOT(PCI_DN(dn->child)->devfn); - num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0)); - if (num) { - pcibios_fixup_new_pci_devices(bus, 1); - pci_bus_add_devices(bus); - } + if (_machine == PLATFORM_PSERIES_LPAR) { + /* use ofdt-based probe */ + of_scan_bus(dn, bus); + if (!list_empty(&bus->devices)) { + pcibios_fixup_new_pci_devices(bus, 0); + pci_bus_add_devices(bus); + } + } else { + /* use legacy probe */ + slotno = PCI_SLOT(PCI_DN(dn->child)->devfn); + num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0)); + if (num) { + pcibios_fixup_new_pci_devices(bus, 1); + pci_bus_add_devices(bus); + } - list_for_each_entry(dev, &bus->devices, bus_list) { - eeh_add_device_late (dev); - if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) - pcibios_pci_config_bridge(dev); + list_for_each_entry(dev, &bus->devices, bus_list) + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) + pcibios_pci_config_bridge(dev); } } EXPORT_SYMBOL_GPL(pcibios_add_pci_devices); + +struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) +{ + struct pci_controller *phb; + int primary; + + primary = list_empty(&hose_list); + phb = pcibios_alloc_controller(dn); + if (!phb) + return NULL; + setup_phb(dn, phb); + pci_process_bridge_OF_ranges(phb, dn, 0); + + pci_setup_phb_io_dynamic(phb, primary); + + pci_devs_phb_init_dynamic(phb); + + if (dn->child) + eeh_add_device_tree_early(dn); + + scan_phb(phb); + pcibios_fixup_new_pci_devices(phb->bus, 0); + pci_bus_add_devices(phb->bus); + + return phb; +} +EXPORT_SYMBOL_GPL(init_phb_dynamic); diff --git a/arch/ppc/kernel/asm-offsets.c b/arch/ppc/kernel/asm-offsets.c index 7964bf660e9..77e4dc780f8 100644 --- a/arch/ppc/kernel/asm-offsets.c +++ b/arch/ppc/kernel/asm-offsets.c @@ -131,7 +131,6 @@ main(void) DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features)); DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup)); - DEFINE(TI_SIGFRAME, offsetof(struct thread_info, nvgprs_frame)); DEFINE(TI_TASK, offsetof(struct thread_info, task)); DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain)); DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index a48b950722a..3a281597848 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -227,7 +227,7 @@ ret_from_syscall: MTMSRD(r10) lwz r9,TI_FLAGS(r12) li r8,-_LAST_ERRNO - andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL) + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK) bne- syscall_exit_work cmplw 0,r3,r8 blt+ syscall_exit_cont @@ -287,8 +287,10 @@ syscall_dotrace: syscall_exit_work: andi. r0,r9,_TIF_RESTOREALL - bne- 2f - cmplw 0,r3,r8 + beq+ 0f + REST_NVGPRS(r1) + b 2f +0: cmplw 0,r3,r8 blt+ 1f andi. r0,r9,_TIF_NOERROR bne- 1f @@ -302,9 +304,7 @@ syscall_exit_work: 2: andi. r0,r9,(_TIF_PERSYSCALL_MASK) beq 4f - /* Clear per-syscall TIF flags if any are set, but _leave_ - _TIF_SAVE_NVGPRS set in r9 since we haven't dealt with that - yet. */ + /* Clear per-syscall TIF flags if any are set. */ li r11,_TIF_PERSYSCALL_MASK addi r12,r12,TI_FLAGS @@ -318,8 +318,13 @@ syscall_exit_work: subi r12,r12,TI_FLAGS 4: /* Anything which requires enabling interrupts? */ - andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SAVE_NVGPRS) - beq 7f + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) + beq ret_from_except + + /* Re-enable interrupts */ + ori r10,r10,MSR_EE + SYNC + MTMSRD(r10) /* Save NVGPRS if they're not saved already */ lwz r4,TRAP(r1) @@ -328,71 +333,11 @@ syscall_exit_work: SAVE_NVGPRS(r1) li r4,0xc00 stw r4,TRAP(r1) - - /* Re-enable interrupts */ -5: ori r10,r10,MSR_EE - SYNC - MTMSRD(r10) - - andi. r0,r9,_TIF_SAVE_NVGPRS - bne save_user_nvgprs - -save_user_nvgprs_cont: - andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) - beq 7f - +5: addi r3,r1,STACK_FRAME_OVERHEAD bl do_syscall_trace_leave - REST_NVGPRS(r1) - -6: lwz r3,GPR3(r1) - LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */ - SYNC - MTMSRD(r10) /* disable interrupts again */ - rlwinm r12,r1,0,0,18 /* current_thread_info() */ - lwz r9,TI_FLAGS(r12) -7: - andi. r0,r9,_TIF_NEED_RESCHED - bne 8f - lwz r5,_MSR(r1) - andi. r5,r5,MSR_PR - beq ret_from_except - andi. r0,r9,_TIF_SIGPENDING - beq ret_from_except - b do_user_signal -8: - ori r10,r10,MSR_EE - SYNC - MTMSRD(r10) /* re-enable interrupts */ - bl schedule - b 6b - -save_user_nvgprs: - lwz r8,TI_SIGFRAME(r12) - -.macro savewords start, end - 1: stw \start,4*(\start)(r8) - .section __ex_table,"a" - .align 2 - .long 1b,save_user_nvgprs_fault - .previous - .if \end - \start - savewords "(\start+1)",\end - .endif -.endm - savewords 14,31 - b save_user_nvgprs_cont - - -save_user_nvgprs_fault: - li r3,11 /* SIGSEGV */ - lwz r4,TI_TASK(r12) - bl force_sigsegv + b ret_from_except_full - rlwinm r12,r1,0,0,18 /* current_thread_info() */ - lwz r9,TI_FLAGS(r12) - b save_user_nvgprs_cont - #ifdef SHOW_SYSCALLS do_show_syscall: #ifdef SHOW_SYSCALLS_TASK @@ -490,6 +435,14 @@ ppc_clone: stw r0,TRAP(r1) /* register set saved */ b sys_clone + .globl ppc_swapcontext +ppc_swapcontext: + SAVE_NVGPRS(r1) + lwz r0,TRAP(r1) + rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */ + stw r0,TRAP(r1) /* register set saved */ + b sys_swapcontext + /* * Top-level page fault handling. * This is in assembler because if do_page_fault tells us that @@ -683,7 +636,7 @@ user_exc_return: /* r10 contains MSR_KERNEL here */ /* Check current_thread_info()->flags */ rlwinm r9,r1,0,0,18 lwz r9,TI_FLAGS(r9) - andi. r0,r9,(_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL) + andi. r0,r9,(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NEED_RESCHED) bne do_work restore_user: diff --git a/arch/s390/lib/spinlock.c b/arch/s390/lib/spinlock.c index 60f80a4eed4..b9b7958a226 100644 --- a/arch/s390/lib/spinlock.c +++ b/arch/s390/lib/spinlock.c @@ -2,8 +2,7 @@ * arch/s390/lib/spinlock.c * Out of line spinlock code. * - * S390 version - * Copyright (C) 2004 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Copyright (C) IBM Corp. 2004, 2006 * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) */ @@ -44,6 +43,8 @@ _raw_spin_lock_wait(raw_spinlock_t *lp, unsigned int pc) _diag44(); count = spin_retry; } + if (__raw_spin_is_locked(lp)) + continue; if (_raw_compare_and_swap(&lp->lock, 0, pc) == 0) return; } @@ -56,6 +57,8 @@ _raw_spin_trylock_retry(raw_spinlock_t *lp, unsigned int pc) int count = spin_retry; while (count-- > 0) { + if (__raw_spin_is_locked(lp)) + continue; if (_raw_compare_and_swap(&lp->lock, 0, pc) == 0) return 1; } @@ -74,6 +77,8 @@ _raw_read_lock_wait(raw_rwlock_t *rw) _diag44(); count = spin_retry; } + if (!__raw_read_can_lock(rw)) + continue; old = rw->lock & 0x7fffffffU; if (_raw_compare_and_swap(&rw->lock, old, old + 1) == old) return; @@ -88,6 +93,8 @@ _raw_read_trylock_retry(raw_rwlock_t *rw) int count = spin_retry; while (count-- > 0) { + if (!__raw_read_can_lock(rw)) + continue; old = rw->lock & 0x7fffffffU; if (_raw_compare_and_swap(&rw->lock, old, old + 1) == old) return 1; @@ -106,6 +113,8 @@ _raw_write_lock_wait(raw_rwlock_t *rw) _diag44(); count = spin_retry; } + if (!__raw_write_can_lock(rw)) + continue; if (_raw_compare_and_swap(&rw->lock, 0, 0x80000000) == 0) return; } @@ -118,6 +127,8 @@ _raw_write_trylock_retry(raw_rwlock_t *rw) int count = spin_retry; while (count-- > 0) { + if (!__raw_write_can_lock(rw)) + continue; if (_raw_compare_and_swap(&rw->lock, 0, 0x80000000) == 0) return 1; } diff --git a/arch/s390/lib/uaccess.S b/arch/s390/lib/uaccess.S index 88fc94fe648..5d59e262504 100644 --- a/arch/s390/lib/uaccess.S +++ b/arch/s390/lib/uaccess.S @@ -198,12 +198,12 @@ __strnlen_user_asm: 0: srst %r2,%r1 jo 0b sacf 0 - jh 1f # \0 found in string ? ahi %r2,1 # strnlen_user result includes the \0 -1: slr %r2,%r3 + # or return count+1 if \0 not found + slr %r2,%r3 br %r14 2: sacf 0 - lhi %r2,-EFAULT + slr %r2,%r2 # return 0 on exception br %r14 .section __ex_table,"a" .long 0b,2b diff --git a/arch/s390/lib/uaccess64.S b/arch/s390/lib/uaccess64.S index 50219786fc7..19b41a33c23 100644 --- a/arch/s390/lib/uaccess64.S +++ b/arch/s390/lib/uaccess64.S @@ -194,12 +194,12 @@ __strnlen_user_asm: 0: srst %r2,%r1 jo 0b sacf 0 - jh 1f # \0 found in string ? aghi %r2,1 # strnlen_user result includes the \0 -1: slgr %r2,%r3 + # or return count+1 if \0 not found + slgr %r2,%r3 br %r14 2: sacf 0 - lghi %r2,-EFAULT + slgr %r2,%r2 # return 0 on exception br %r14 .section __ex_table,"a" .quad 0b,2b diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index e73621d03a2..e9b275d9073 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -392,9 +392,9 @@ config SH_TMU endmenu -source "arch/sh/boards/renesas/hs7751rvoip/Kconfig" +#source "arch/sh/boards/renesas/hs7751rvoip/Kconfig" -source "arch/sh/boards/renesas/rts7751r2d/Kconfig" +#source "arch/sh/boards/renesas/rts7751r2d/Kconfig" config SH_PCLK_FREQ int "Peripheral clock frequency (in Hz)" diff --git a/arch/sparc64/kernel/sys32.S b/arch/sparc64/kernel/sys32.S index 60b59375aa7..c4a1cef4b1e 100644 --- a/arch/sparc64/kernel/sys32.S +++ b/arch/sparc64/kernel/sys32.S @@ -318,7 +318,7 @@ do_sys_recvmsg: /* compat_sys_recvmsg(int, struct compat_msghdr *, unsigned int) nop nop - .section __ex_table + .section __ex_table,"a" .align 4 .word 1b, __retl_efault, 2b, __retl_efault .word 3b, __retl_efault, 4b, __retl_efault diff --git a/arch/sparc64/kernel/una_asm.S b/arch/sparc64/kernel/una_asm.S index 1f5b5b708ce..be183fe4144 100644 --- a/arch/sparc64/kernel/una_asm.S +++ b/arch/sparc64/kernel/una_asm.S @@ -47,7 +47,7 @@ __do_int_store: mov 0, %o0 .size __do_int_store, .-__do_int_store - .section __ex_table + .section __ex_table,"a" .word 4b, __retl_efault .word 5b, __retl_efault .word 6b, __retl_efault @@ -129,7 +129,7 @@ do_int_load: mov 0, %o0 .size __do_int_load, .-__do_int_load - .section __ex_table + .section __ex_table,"a" .word 4b, __retl_efault .word 5b, __retl_efault .word 6b, __retl_efault diff --git a/arch/sparc64/lib/U1copy_from_user.S b/arch/sparc64/lib/U1copy_from_user.S index 93146a81e2d..3192b0bf4fa 100644 --- a/arch/sparc64/lib/U1copy_from_user.S +++ b/arch/sparc64/lib/U1copy_from_user.S @@ -9,7 +9,7 @@ .align 4; \ 99: retl; \ mov 1, %o0; \ - .section __ex_table; \ + .section __ex_table,"a";\ .align 4; \ .word 98b, 99b; \ .text; \ diff --git a/arch/sparc64/lib/U1copy_to_user.S b/arch/sparc64/lib/U1copy_to_user.S index 1fccc521e2b..d1210ffb0b8 100644 --- a/arch/sparc64/lib/U1copy_to_user.S +++ b/arch/sparc64/lib/U1copy_to_user.S @@ -9,7 +9,7 @@ .align 4; \ 99: retl; \ mov 1, %o0; \ - .section __ex_table; \ + .section __ex_table,"a";\ .align 4; \ .word 98b, 99b; \ .text; \ diff --git a/arch/sparc64/lib/U3copy_from_user.S b/arch/sparc64/lib/U3copy_from_user.S index df600b667e4..f5bfc8d9d21 100644 --- a/arch/sparc64/lib/U3copy_from_user.S +++ b/arch/sparc64/lib/U3copy_from_user.S @@ -9,7 +9,7 @@ .align 4; \ 99: retl; \ mov 1, %o0; \ - .section __ex_table; \ + .section __ex_table,"a";\ .align 4; \ .word 98b, 99b; \ .text; \ diff --git a/arch/sparc64/lib/U3copy_to_user.S b/arch/sparc64/lib/U3copy_to_user.S index f337f22ed82..2334f111bb0 100644 --- a/arch/sparc64/lib/U3copy_to_user.S +++ b/arch/sparc64/lib/U3copy_to_user.S @@ -9,7 +9,7 @@ .align 4; \ 99: retl; \ mov 1, %o0; \ - .section __ex_table; \ + .section __ex_table,"a";\ .align 4; \ .word 98b, 99b; \ .text; \ diff --git a/arch/sparc64/lib/bzero.S b/arch/sparc64/lib/bzero.S index 21a933ffb7c..1d2abcfa4e5 100644 --- a/arch/sparc64/lib/bzero.S +++ b/arch/sparc64/lib/bzero.S @@ -92,7 +92,7 @@ __bzero_done: .align 4; \ 99: retl; \ mov %o1, %o0; \ - .section __ex_table; \ + .section __ex_table,"a";\ .align 4; \ .word 98b, 99b; \ .text; \ diff --git a/arch/sparc64/lib/copy_in_user.S b/arch/sparc64/lib/copy_in_user.S index 816076c0bc0..650af3f21f7 100644 --- a/arch/sparc64/lib/copy_in_user.S +++ b/arch/sparc64/lib/copy_in_user.S @@ -13,7 +13,7 @@ .align 4; \ 99: retl; \ mov 1, %o0; \ - .section __ex_table; \ + .section __ex_table,"a";\ .align 4; \ .word 98b, 99b; \ .text; \ diff --git a/arch/sparc64/lib/csum_copy_from_user.S b/arch/sparc64/lib/csum_copy_from_user.S index 817ebdae39f..a22eddbe5db 100644 --- a/arch/sparc64/lib/csum_copy_from_user.S +++ b/arch/sparc64/lib/csum_copy_from_user.S @@ -9,7 +9,7 @@ .align 4; \ 99: retl; \ mov -1, %o0; \ - .section __ex_table; \ + .section __ex_table,"a";\ .align 4; \ .word 98b, 99b; \ .text; \ diff --git a/arch/sparc64/lib/csum_copy_to_user.S b/arch/sparc64/lib/csum_copy_to_user.S index c2f9463ea1e..d5b12f441f0 100644 --- a/arch/sparc64/lib/csum_copy_to_user.S +++ b/arch/sparc64/lib/csum_copy_to_user.S @@ -9,7 +9,7 @@ .align 4; \ 99: retl; \ mov -1, %o0; \ - .section __ex_table; \ + .section __ex_table,"a";\ .align 4; \ .word 98b, 99b; \ .text; \ diff --git a/arch/sparc64/lib/strlen_user.S b/arch/sparc64/lib/strlen_user.S index 9ed54ba14fc..114ed111e25 100644 --- a/arch/sparc64/lib/strlen_user.S +++ b/arch/sparc64/lib/strlen_user.S @@ -85,7 +85,7 @@ __strnlen_user: retl clr %o0 - .section __ex_table,#alloc + .section __ex_table,"a" .align 4 .word 10b, 30b diff --git a/arch/sparc64/lib/strncpy_from_user.S b/arch/sparc64/lib/strncpy_from_user.S index e1264650ca7..b2f499f7942 100644 --- a/arch/sparc64/lib/strncpy_from_user.S +++ b/arch/sparc64/lib/strncpy_from_user.S @@ -125,7 +125,7 @@ __strncpy_from_user: add %o2, %o3, %o0 .size __strncpy_from_user, .-__strncpy_from_user - .section __ex_table,#alloc + .section __ex_table,"a" .align 4 .word 60b, __retl_efault .word 61b, __retl_efault diff --git a/arch/sparc64/solaris/entry64.S b/arch/sparc64/solaris/entry64.S index eb314ed23cd..f170324e8bf 100644 --- a/arch/sparc64/solaris/entry64.S +++ b/arch/sparc64/solaris/entry64.S @@ -217,7 +217,7 @@ solaris_unimplemented: ba,pt %xcc, ret_from_solaris nop - .section __ex_table,#alloc + .section __ex_table,"a" .align 4 .word exen, exenf diff --git a/arch/v850/kernel/process.c b/arch/v850/kernel/process.c index eb909937958..621111ddf90 100644 --- a/arch/v850/kernel/process.c +++ b/arch/v850/kernel/process.c @@ -30,6 +30,9 @@ #include <asm/system.h> #include <asm/pgtable.h> +void (*pm_power_off)(void) = NULL; +EXPORT_SYMBOL(pm_power_off); + extern void ret_from_fork (void); diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c index d70605eda33..e5b14c57eaa 100644 --- a/arch/x86_64/kernel/apic.c +++ b/arch/x86_64/kernel/apic.c @@ -962,14 +962,12 @@ void smp_apic_timer_interrupt(struct pt_regs *regs) irq_exit(); } -int __initdata unsync_tsc_on_multicluster; - /* * oem_force_hpet_timer -- force HPET mode for some boxes. * * Thus far, the major user of this is IBM's Summit2 series: * - * Some clustered boxes may have unsynced TSC problems if they are + * Clustered boxes may have unsynced TSC problems if they are * multi-chassis. Use available data to take a good guess. * If in doubt, go HPET. */ @@ -979,11 +977,6 @@ __cpuinit int oem_force_hpet_timer(void) unsigned id; DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS); - /* Only do this check on IBM machines - big Unisys systems - use multiple clusters too, but have synchronized TSC */ - if (!unsync_tsc_on_multicluster) - return 0; - bitmap_zero(clustermap, NUM_APIC_CLUSTERS); for (i = 0; i < NR_CPUS; i++) { diff --git a/arch/x86_64/kernel/machine_kexec.c b/arch/x86_64/kernel/machine_kexec.c index 89fab51e20f..25ac8a3faae 100644 --- a/arch/x86_64/kernel/machine_kexec.c +++ b/arch/x86_64/kernel/machine_kexec.c @@ -140,7 +140,7 @@ static void load_segments(void) "\tmovl %0,%%ss\n" "\tmovl %0,%%fs\n" "\tmovl %0,%%gs\n" - : : "a" (__KERNEL_DS) + : : "a" (__KERNEL_DS) : "memory" ); } diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 7ee4a14ec3b..e90ef5db891 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -26,6 +26,10 @@ config GENERIC_HARDIRQS bool default y +config RWSEM_GENERIC_SPINLOCK + bool + default y + source "init/Kconfig" menu "Processor type and features" diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index f1f596644bf..64a649eb883 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -64,6 +64,9 @@ EXPORT_SYMBOL(init_task); struct task_struct *current_set[NR_CPUS] = {&init_task, }; +void (*pm_power_off)(void) = NULL; +EXPORT_SYMBOL(pm_power_off); + #if XCHAL_CP_NUM > 0 |