diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/Kconfig | 4 | ||||
| -rw-r--r-- | arch/arm/Kconfig-nommu | 2 | ||||
| -rw-r--r-- | arch/arm/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/kernel/Makefile | 8 | ||||
| -rw-r--r-- | arch/arm/mm/Kconfig | 21 | ||||
| -rw-r--r-- | arch/arm/mm/Makefile | 2 |
6 files changed, 33 insertions, 5 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index dedf02b6f32..7c8c6079f94 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -9,7 +9,7 @@ config ARM select BUILDTIME_EXTABLE_SORT if MMU select CPU_PM if (SUSPEND || CPU_IDLE) select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN && MMU - select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI) + select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI) select GENERIC_CLOCKEVENTS_BROADCAST if SMP select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW @@ -1685,7 +1685,7 @@ config SCHED_HRTICK config THUMB2_KERNEL bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY - depends on CPU_V7 && !CPU_V6 && !CPU_V6K + depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K default y if CPU_THUMBONLY select AEABI select ARM_ASM_UNIFIED diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu index 2cef8e13f9f..c859495da48 100644 --- a/arch/arm/Kconfig-nommu +++ b/arch/arm/Kconfig-nommu @@ -28,7 +28,7 @@ config FLASH_SIZE config PROCESSOR_ID hex 'Hard wire the processor ID' default 0x00007700 - depends on !CPU_CP15 + depends on !(CPU_CP15 || CPU_V7M) help If processor has no CP15 register, this processor ID is used instead of the auto-probing which utilizes the register. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index ee4605f400b..f11b8da1767 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -59,6 +59,7 @@ comma = , # Note that GCC does not numerically define an architecture version # macro, but instead defines a whole series of macros which makes # testing for a specific architecture or later rather impossible. +arch-$(CONFIG_CPU_32v7M) :=-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m arch-$(CONFIG_CPU_32v7) :=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a) arch-$(CONFIG_CPU_32v6) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6) # Only override the compiler option if ARMv6. The ARMv6K extensions are diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 5f3338eacad..00d703c49f8 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -15,7 +15,7 @@ CFLAGS_REMOVE_return_address.o = -pg # Object file lists. -obj-y := elf.o entry-armv.o entry-common.o irq.o opcodes.o \ +obj-y := elf.o entry-common.o irq.o opcodes.o \ process.o ptrace.o return_address.o sched_clock.o \ setup.o signal.o stacktrace.o sys_arm.o time.o traps.o @@ -23,6 +23,12 @@ obj-$(CONFIG_ATAGS) += atags_parse.o obj-$(CONFIG_ATAGS_PROC) += atags_proc.o obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += atags_compat.o +ifeq ($(CONFIG_CPU_V7M),y) +obj-y += entry-v7m.o +else +obj-y += entry-armv.o +endif + obj-$(CONFIG_OC_ETM) += etm.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ISA_DMA_API) += dma.o diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index cb812a13e29..cce78b07082 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -397,6 +397,15 @@ config CPU_V7 select CPU_PABRT_V7 select CPU_TLB_V7 if MMU +# ARMv7M +config CPU_V7M + bool + select CPU_32v7M + select CPU_ABRT_NOMMU + select CPU_CACHE_NOP + select CPU_PABRT_LEGACY + select CPU_THUMBONLY + config CPU_THUMBONLY bool # There are no CPUs available with MMU that don't implement an ARM ISA: @@ -441,6 +450,9 @@ config CPU_32v6K config CPU_32v7 bool +config CPU_32v7M + bool + # The abort model config CPU_ABRT_NOMMU bool @@ -494,6 +506,9 @@ config CPU_CACHE_V6 config CPU_CACHE_V7 bool +config CPU_CACHE_NOP + bool + config CPU_CACHE_VIVT bool @@ -616,7 +631,11 @@ config ARCH_DMA_ADDR_T_64BIT config ARM_THUMB bool "Support Thumb user binaries" if !CPU_THUMBONLY - depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V6K || CPU_V7 || CPU_FEROCEON + depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || \ + CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || \ + CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \ + CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V6K || \ + CPU_V7 || CPU_FEROCEON || CPU_V7M default y help Say Y if you want to include kernel support for running user space diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 4e333fa2756..317b5755934 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_CPU_CACHE_V4WB) += cache-v4wb.o obj-$(CONFIG_CPU_CACHE_V6) += cache-v6.o obj-$(CONFIG_CPU_CACHE_V7) += cache-v7.o obj-$(CONFIG_CPU_CACHE_FA) += cache-fa.o +obj-$(CONFIG_CPU_CACHE_NOP) += cache-nop.o AFLAGS_cache-v6.o :=-Wa,-march=armv6 AFLAGS_cache-v7.o :=-Wa,-march=armv7-a @@ -88,6 +89,7 @@ obj-$(CONFIG_CPU_FEROCEON) += proc-feroceon.o obj-$(CONFIG_CPU_V6) += proc-v6.o obj-$(CONFIG_CPU_V6K) += proc-v6.o obj-$(CONFIG_CPU_V7) += proc-v7.o +obj-$(CONFIG_CPU_V7M) += proc-v7m.o AFLAGS_proc-v6.o :=-Wa,-march=armv6 AFLAGS_proc-v7.o :=-Wa,-march=armv7-a |