diff options
Diffstat (limited to 'arch')
265 files changed, 2083 insertions, 11650 deletions
diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h index 058937bf5a7..b1834166922 100644 --- a/arch/alpha/include/asm/unistd.h +++ b/arch/alpha/include/asm/unistd.h @@ -452,10 +452,14 @@ #define __NR_fanotify_init 494 #define __NR_fanotify_mark 495 #define __NR_prlimit64 496 +#define __NR_name_to_handle_at 497 +#define __NR_open_by_handle_at 498 +#define __NR_clock_adjtime 499 +#define __NR_syncfs 500 #ifdef __KERNEL__ -#define NR_SYSCALLS 497 +#define NR_SYSCALLS 501 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile index 9bb7b858ed2..7a6d908bb86 100644 --- a/arch/alpha/kernel/Makefile +++ b/arch/alpha/kernel/Makefile @@ -4,7 +4,7 @@ extra-y := head.o vmlinux.lds asflags-y := $(KBUILD_CFLAGS) -ccflags-y := -Werror -Wno-sign-compare +ccflags-y := -Wno-sign-compare obj-y := entry.o traps.o process.o init_task.o osf_sys.o irq.o \ irq_alpha.o signal.o setup.o ptrace.o time.o \ diff --git a/arch/alpha/kernel/core_mcpcia.c b/arch/alpha/kernel/core_mcpcia.c index 381fec0af52..da7bcc372f1 100644 --- a/arch/alpha/kernel/core_mcpcia.c +++ b/arch/alpha/kernel/core_mcpcia.c @@ -88,7 +88,7 @@ conf_read(unsigned long addr, unsigned char type1, { unsigned long flags; unsigned long mid = MCPCIA_HOSE2MID(hose->index); - unsigned int stat0, value, temp, cpu; + unsigned int stat0, value, cpu; cpu = smp_processor_id(); @@ -101,7 +101,7 @@ conf_read(unsigned long addr, unsigned char type1, stat0 = *(vuip)MCPCIA_CAP_ERR(mid); *(vuip)MCPCIA_CAP_ERR(mid) = stat0; mb(); - temp = *(vuip)MCPCIA_CAP_ERR(mid); + *(vuip)MCPCIA_CAP_ERR(mid); DBG_CFG(("conf_read: MCPCIA_CAP_ERR(%d) was 0x%x\n", mid, stat0)); mb(); @@ -136,7 +136,7 @@ conf_write(unsigned long addr, unsigned int value, unsigned char type1, { unsigned long flags; unsigned long mid = MCPCIA_HOSE2MID(hose->index); - unsigned int stat0, temp, cpu; + unsigned int stat0, cpu; cpu = smp_processor_id(); @@ -145,7 +145,7 @@ conf_write(unsigned long addr, unsigned int value, unsigned char type1, /* Reset status register to avoid losing errors. */ stat0 = *(vuip)MCPCIA_CAP_ERR(mid); *(vuip)MCPCIA_CAP_ERR(mid) = stat0; mb(); - temp = *(vuip)MCPCIA_CAP_ERR(mid); + *(vuip)MCPCIA_CAP_ERR(mid); DBG_CFG(("conf_write: MCPCIA CAP_ERR(%d) was 0x%x\n", mid, stat0)); draina(); @@ -157,7 +157,7 @@ conf_write(unsigned long addr, unsigned int value, unsigned char type1, *((vuip)addr) = value; mb(); mb(); /* magic */ - temp = *(vuip)MCPCIA_CAP_ERR(mid); /* read to force the write */ + *(vuip)MCPCIA_CAP_ERR(mid); /* read to force the write */ mcheck_expected(cpu) = 0; mb(); @@ -572,12 +572,10 @@ mcpcia_print_system_area(unsigned long la_ptr) void mcpcia_machine_check(unsigned long vector, unsigned long la_ptr) { - struct el_common *mchk_header; struct el_MCPCIA_uncorrected_frame_mcheck *mchk_logout; unsigned int cpu = smp_processor_id(); int expected; - mchk_header = (struct el_common *)la_ptr; mchk_logout = (struct el_MCPCIA_uncorrected_frame_mcheck *)la_ptr; expected = mcheck_expected(cpu); diff --git a/arch/alpha/kernel/err_titan.c b/arch/alpha/kernel/err_titan.c index c3b3781a03d..14b26c466c8 100644 --- a/arch/alpha/kernel/err_titan.c +++ b/arch/alpha/kernel/err_titan.c @@ -533,8 +533,6 @@ static struct el_subpacket_annotation el_titan_annotations[] = { static struct el_subpacket * el_process_regatta_subpacket(struct el_subpacket *header) { - int status; - if (header->class != EL_CLASS__REGATTA_FAMILY) { printk("%s ** Unexpected header CLASS %d TYPE %d, aborting\n", err_print_prefix, @@ -551,7 +549,7 @@ el_process_regatta_subpacket(struct el_subpacket *header) printk("%s ** Occurred on CPU %d:\n", err_print_prefix, (int)header->by_type.regatta_frame.cpuid); - status = privateer_process_logout_frame((struct el_common *) + privateer_process_logout_frame((struct el_common *) header->by_type.regatta_frame.data_start, 1); break; default: diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c index 1479dc6ebd9..51b7fbd9e4c 100644 --- a/arch/alpha/kernel/irq_alpha.c +++ b/arch/alpha/kernel/irq_alpha.c @@ -228,7 +228,7 @@ struct irqaction timer_irqaction = { void __init init_rtc_irq(void) { - irq_set_chip_and_handler_name(RTC_IRQ, &no_irq_chip, + irq_set_chip_and_handler_name(RTC_IRQ, &dummy_irq_chip, handle_simple_irq, "RTC"); setup_irq(RTC_IRQ, &timer_irqaction); } diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c index d2634e4476b..edbddcbd5bc 100644 --- a/arch/alpha/kernel/setup.c +++ b/arch/alpha/kernel/setup.c @@ -1404,8 +1404,6 @@ determine_cpu_caches (unsigned int cpu_type) case PCA56_CPU: case PCA57_CPU: { - unsigned long cbox_config, size; - if (cpu_type == PCA56_CPU) { L1I = CSHAPE(16*1024, 6, 1); L1D = CSHAPE(8*1024, 5, 1); @@ -1415,10 +1413,12 @@ determine_cpu_caches (unsigned int cpu_type) } L3 = -1; +#if 0 + unsigned long cbox_config, size; + cbox_config = *(vulp) phys_to_virt (0xfffff00008UL); size = 512*1024 * (1 << ((cbox_config >> 12) & 3)); -#if 0 L2 = ((cbox_config >> 31) & 1 ? CSHAPE (size, 6, 1) : -1); #else L2 = external_cache_probe(512*1024, 6); diff --git a/arch/alpha/kernel/smc37c93x.c b/arch/alpha/kernel/smc37c93x.c index 3e6a2893af9..6886b834f48 100644 --- a/arch/alpha/kernel/smc37c93x.c +++ b/arch/alpha/kernel/smc37c93x.c @@ -79,7 +79,6 @@ static unsigned long __init SMCConfigState(unsigned long baseAddr) { unsigned char devId; - unsigned char devRev; unsigned long configPort; unsigned long indexPort; @@ -100,7 +99,7 @@ static unsigned long __init SMCConfigState(unsigned long baseAddr) devId = inb(dataPort); if (devId == VALID_DEVICE_ID) { outb(DEVICE_REV, indexPort); - devRev = inb(dataPort); + /* unsigned char devRev = */ inb(dataPort); break; } else diff --git a/arch/alpha/kernel/sys_wildfire.c b/arch/alpha/kernel/sys_wildfire.c index d3cb28bb8eb..d92cdc715c6 100644 --- a/arch/alpha/kernel/sys_wildfire.c +++ b/arch/alpha/kernel/sys_wildfire.c @@ -156,7 +156,6 @@ static void __init wildfire_init_irq_per_pca(int qbbno, int pcano) { int i, irq_bias; - unsigned long io_bias; static struct irqaction isa_enable = { .handler = no_action, .name = "isa_enable", @@ -165,10 +164,12 @@ wildfire_init_irq_per_pca(int qbbno, int pcano) irq_bias = qbbno * (WILDFIRE_PCA_PER_QBB * WILDFIRE_IRQ_PER_PCA) + pcano * WILDFIRE_IRQ_PER_PCA; +#if 0 + unsigned long io_bias; + /* Only need the following for first PCI bus per PCA. */ io_bias = WILDFIRE_IO(qbbno, pcano<<1) - WILDFIRE_IO_BIAS; -#if 0 outb(0, DMA1_RESET_REG + io_bias); outb(0, DMA2_RESET_REG + io_bias); outb(DMA_MODE_CASCADE, DMA2_MODE_REG + io_bias); diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index a6a1de9db16..15f999d41c7 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -498,23 +498,27 @@ sys_call_table: .quad sys_ni_syscall /* sys_timerfd */ .quad sys_eventfd .quad sys_recvmmsg - .quad sys_fallocate /* 480 */ + .quad sys_fallocate /* 480 */ .quad sys_timerfd_create .quad sys_timerfd_settime .quad sys_timerfd_gettime .quad sys_signalfd4 - .quad sys_eventfd2 /* 485 */ + .quad sys_eventfd2 /* 485 */ .quad sys_epoll_create1 .quad sys_dup3 .quad sys_pipe2 .quad sys_inotify_init1 - .quad sys_preadv /* 490 */ + .quad sys_preadv /* 490 */ .quad sys_pwritev .quad sys_rt_tgsigqueueinfo .quad sys_perf_event_open .quad sys_fanotify_init - .quad sys_fanotify_mark /* 495 */ + .quad sys_fanotify_mark /* 495 */ .quad sys_prlimit64 + .quad sys_name_to_handle_at + .quad sys_open_by_handle_at + .quad sys_clock_adjtime + .quad sys_syncfs /* 500 */ .size sys_call_table, . - sys_call_table .type sys_call_table, @object diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c index a58e84f1a63..818e74ed45d 100644 --- a/arch/alpha/kernel/time.c +++ b/arch/alpha/kernel/time.c @@ -153,6 +153,7 @@ void read_persistent_clock(struct timespec *ts) year += 100; ts->tv_sec = mktime(year, mon, day, hour, min, sec); + ts->tv_nsec = 0; } @@ -374,8 +375,7 @@ static struct clocksource clocksource_rpcc = { static inline void register_rpcc_clocksource(long cycle_freq) { - clocksource_calc_mult_shift(&clocksource_rpcc, cycle_freq, 4); - clocksource_register(&clocksource_rpcc); + clocksource_register_hz(&clocksource_rpcc, cycle_freq); } #else /* !CONFIG_SMP */ static inline void register_rpcc_clocksource(long cycle_freq) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index fdc9d4dbf85..377a7a595b0 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1540,7 +1540,6 @@ config HIGHMEM config HIGHPTE bool "Allocate 2nd-level pagetables from highmem" depends on HIGHMEM - depends on !OUTER_CACHE config HW_PERF_EVENTS bool "Enable hardware performance counter support for perf events" @@ -2012,6 +2011,8 @@ source "kernel/power/Kconfig" config ARCH_SUSPEND_POSSIBLE depends on !ARCH_S5P64X0 && !ARCH_S5P6442 + depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \ + CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE def_bool y endmenu diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 494224a9b45..03d01d783e3 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -63,17 +63,6 @@ config DEBUG_USER 8 - SIGSEGV faults 16 - SIGBUS faults -config DEBUG_ERRORS - bool "Verbose kernel error messages" - depends on DEBUG_KERNEL - help - This option controls verbose debugging information which can be - printed when the kernel detects an internal error. This debugging - information is useful to kernel hackers when tracking down problems, - but mostly meaningless to other people. It's safe to say Y unless - you are concerned with the code size or don't want to see these - messages. - config DEBUG_STACK_USAGE bool "Enable stack utilization instrumentation" depends on DEBUG_KERNEL diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 8ebbb511c78..0c6852d9350 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -74,7 +74,7 @@ ZTEXTADDR := $(CONFIG_ZBOOT_ROM_TEXT) ZBSSADDR := $(CONFIG_ZBOOT_ROM_BSS) else ZTEXTADDR := 0 -ZBSSADDR := ALIGN(4) +ZBSSADDR := ALIGN(8) endif SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/ diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index adf583cd0c3..49f5b2eaaa8 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -179,15 +179,14 @@ not_angel: bl cache_on restart: adr r0, LC0 - ldmia r0, {r1, r2, r3, r5, r6, r9, r11, r12} - ldr sp, [r0, #32] + ldmia r0, {r1, r2, r3, r6, r9, r11, r12} + ldr sp, [r0, #28] /* * We might be running at a different address. We need * to fix up various pointers. */ sub r0, r0, r1 @ calculate the delta offset - add r5, r5, r0 @ _start add r6, r6, r0 @ _edata #ifndef CONFIG_ZBOOT_ROM @@ -206,31 +205,40 @@ restart: adr r0, LC0 /* * Check to see if we will overwrite ourselves. * r4 = final kernel address - * r5 = start of this image * r9 = size of decompressed image * r10 = end of this image, including bss/stack/malloc space if non XIP * We basically want: - * r4 >= r10 -> OK - * r4 + image length <= r5 -> OK + * r4 - 16k page directory >= r10 -> OK + * r4 + image length <= current position (pc) -> OK */ + add r10, r10, #16384 cmp r4, r10 bhs wont_overwrite add r10, r4, r9 - cmp r10, r5 + ARM( cmp r10, pc ) + THUMB( mov lr, pc ) + THUMB( cmp r10, lr ) bls wont_overwrite /* * Relocate ourselves past the end of the decompressed kernel. - * r5 = start of this image * r6 = _edata * r10 = end of the decompressed kernel * Because we always copy ahead, we need to do it from the end and go * backward in case the source and destination overlap. */ - /* Round up to next 256-byte boundary. */ - add r10, r10, #256 + /* + * Bump to the next 256-byte boundary with the size of + * the relocation code added. This avoids overwriting + * ourself when the offset is small. + */ + add r10, r10, #((reloc_code_end - restart + 256) & ~255) bic r10, r10, #255 + /* Get start of code we want to copy and align it down. */ + adr r5, restart + bic r5, r5, #31 + sub r9, r6, r5 @ size to copy add r9, r9, #31 @ rounded up to a multiple bic r9, r9, #31 @ ... of 32 bytes @@ -245,6 +253,11 @@ restart: adr r0, LC0 /* Preserve offset to relocated code. */ sub r6, r9, r6 +#ifndef CONFIG_ZBOOT_ROM + /* cache_clean_flush may use the stack, so relocate it */ + add sp, sp, r6 +#endif + bl cache_clean_flush adr r0, BSYM(restart) @@ -333,7 +346,6 @@ not_relocated: mov r0, #0 LC0: .word LC0 @ r1 .word __bss_start @ r2 .word _end @ r3 - .word _start @ r5 .word _edata @ r6 .word _image_size @ r9 .word _got_start @ r11 @@ -1062,6 +1074,7 @@ memdump: mov r12, r0 #endif .ltorg +reloc_code_end: .align .section ".stack", "aw", %nobits diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in index 5309909d728..ea80abe7884 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.in +++ b/arch/arm/boot/compressed/vmlinux.lds.in @@ -54,6 +54,7 @@ SECTIONS .bss : { *(.bss) } _end = .; + . = ALIGN(8); /* the stack must be 64-bit aligned */ .stack : { *(.stack) } .stab 0 : { *(.stab) } diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index e7521bca2c3..6ea9b6f3607 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -16,5 +16,4 @@ obj-$(CONFIG_SHARP_SCOOP) += scoop.o obj-$(CONFIG_ARCH_IXP2000) += uengine.o obj-$(CONFIG_ARCH_IXP23XX) += uengine.o obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o -obj-$(CONFIG_COMMON_CLKDEV) += clkdev.o obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o diff --git a/arch/arm/configs/at91x40_defconfig b/arch/arm/configs/at91x40_defconfig new file mode 100644 index 00000000000..c55e9212fcb --- /dev/null +++ b/arch/arm/configs/at91x40_defconfig @@ -0,0 +1,48 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_EMBEDDED=y +# CONFIG_HOTPLUG is not set +# CONFIG_ELF_CORE is not set +# CONFIG_FUTEX is not set +# CONFIG_TIMERFD is not set +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_MMU is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91X40=y +CONFIG_MACH_AT91EB01=y +CONFIG_AT91_EARLY_USART0=y +CONFIG_CPU_ARM7TDMI=y +CONFIG_SET_MEM_PARAM=y +CONFIG_DRAM_BASE=0x01000000 +CONFIG_DRAM_SIZE=0x00400000 +CONFIG_FLASH_MEM_BASE=0x01400000 +CONFIG_PROCESSOR_ID=0x14000040 +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_BINFMT_FLAT=y +# CONFIG_SUSPEND is not set +# CONFIG_FW_LOADER is not set +CONFIG_MTD=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=y +CONFIG_BLK_DEV_RAM=y +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_EXT2_FS=y +# CONFIG_DNOTIFY is not set +CONFIG_ROMFS_FS=y +# CONFIG_ENABLE_MUST_CHECK is not set diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index ed5bc9e05a4..cd4458f6417 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -2,6 +2,7 @@ #define __ASM_ARM_CPUTYPE_H #include <linux/stringify.h> +#include <linux/kernel.h> #define CPUID_ID 0 #define CPUID_CACHETYPE 1 diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h index bb8a19bd582..e46bdd0097e 100644 --- a/arch/arm/include/asm/kprobes.h +++ b/arch/arm/include/asm/kprobes.h @@ -39,10 +39,13 @@ typedef u32 kprobe_opcode_t; struct kprobe; typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *); +typedef unsigned long (kprobe_check_cc)(unsigned long); + /* Architecture specific copy of original instruction. */ struct arch_specific_insn { kprobe_opcode_t *insn; kprobe_insn_handler_t *insn_handler; + kprobe_check_cc *insn_check_cc; }; struct prev_kprobe { diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 885be097769..832888d0c20 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -159,7 +159,7 @@ extern unsigned int user_debug; #include <mach/barriers.h> #elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP) #define mb() do { dsb(); outer_sync(); } while (0) -#define rmb() dmb() +#define rmb() dsb() #define wmb() mb() #else #include <asm/memory.h> diff --git a/arch/arm/include/asm/thread_notify.h b/arch/arm/include/asm/thread_notify.h index c4391ba2035..1dc98067589 100644 --- a/arch/arm/include/asm/thread_notify.h +++ b/arch/arm/include/asm/thread_notify.h @@ -43,6 +43,7 @@ static inline void thread_notify(unsigned long rc, struct thread_info *thread) #define THREAD_NOTIFY_FLUSH 0 #define THREAD_NOTIFY_EXIT 1 #define THREAD_NOTIFY_SWITCH 2 +#define THREAD_NOTIFY_COPY 3 #endif #endif diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index c891eb76c0e..87dbe3e2197 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -396,6 +396,10 @@ #define __NR_fanotify_init (__NR_SYSCALL_BASE+367) #define __NR_fanotify_mark (__NR_SYSCALL_BASE+368) #define __NR_prlimit64 (__NR_SYSCALL_BASE+369) +#define __NR_name_to_handle_at (__NR_SYSCALL_BASE+370) +#define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371) +#define __NR_clock_adjtime (__NR_SYSCALL_BASE+372) +#define __NR_syncfs (__NR_SYSCALL_BASE+373) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 74554f1742d..8d95446150a 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -29,7 +29,7 @@ obj-$(CONFIG_MODULES) += armksyms.o module.o obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o -obj-$(CONFIG_PM) += sleep.o +obj-$(CONFIG_PM_SLEEP) += sleep.o obj-$(CONFIG_HAVE_SCHED_CLOCK) += sched_clock.o obj-$(CONFIG_SMP) += smp.o smp_tlb.o obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 5c26eccef99..7fbf28c35bb 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -379,6 +379,10 @@ CALL(sys_fanotify_init) CALL(sys_fanotify_mark) CALL(sys_prlimit64) +/* 370 */ CALL(sys_name_to_handle_at) + CALL(sys_open_by_handle_at) + CALL(sys_clock_adjtime) + CALL(sys_syncfs) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c index d4a0da1e48f..9b05c6a0dce 100644 --- a/arch/arm/kernel/elf.c +++ b/arch/arm/kernel/elf.c @@ -40,15 +40,22 @@ EXPORT_SYMBOL(elf_check_arch); void elf_set_personality(const struct elf32_hdr *x) { unsigned int eflags = x->e_flags; - unsigned int personality = PER_LINUX_32BIT; + unsigned int personality = current->personality & ~PER_MASK; + + /* + * We only support Linux ELF executables, so always set the + * personality to LINUX. + */ + personality |= PER_LINUX; /* * APCS-26 is only valid for OABI executables */ - if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN) { - if (eflags & EF_ARM_APCS_26) - personality = PER_LINUX; - } + if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN && + (eflags & EF_ARM_APCS_26)) + personality &= ~ADDR_LIMIT_32BIT; + else + personality |= ADDR_LIMIT_32BIT; set_personality(personality); diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 8dbc126f715..87acc25d7a3 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -868,6 +868,13 @@ static void reset_ctrl_regs(void *info) */ asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0)); isb(); + + /* + * Clear any configured vector-catch events before + * enabling monitor mode. + */ + asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0)); + isb(); } if (enable_monitor_mode()) diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c index 23891317dc4..15eeff6aea0 100644 --- a/arch/arm/kernel/kprobes-decode.c +++ b/arch/arm/kernel/kprobes-decode.c @@ -34,9 +34,6 @@ * * *) If the PC is written to by the instruction, the * instruction must be fully simulated in software. - * If it is a conditional instruction, the handler - * will use insn[0] to copy its condition code to - * set r0 to 1 and insn[1] to "mov pc, lr" to return. * * *) Otherwise, a modified form of the instruction is * directly executed. Its handler calls the @@ -68,13 +65,17 @@ #define branch_displacement(insn) sign_extend(((insn) & 0xffffff) << 2, 25) +#define is_r15(insn, bitpos) (((insn) & (0xf << bitpos)) == (0xf << bitpos)) + +/* + * Test if load/store instructions writeback the address register. + * if P (bit 24) == 0 or W (bit 21) == 1 + */ +#define is_writeback(insn) ((insn ^ 0x01000000) & 0x01200000) + #define PSR_fs (PSR_f|PSR_s) #define KPROBE_RETURN_INSTRUCTION 0xe1a0f00e /* mov pc, lr */ -#define SET_R0_TRUE_INSTRUCTION 0xe3a00001 /* mov r0, #1 */ - -#define truecc_insn(insn) (((insn) & 0xf0000000) | \ - (SET_R0_TRUE_INSTRUCTION & 0x0fffffff)) typedef long (insn_0arg_fn_t)(void); typedef long (insn_1arg_fn_t)(long); @@ -419,14 +420,10 @@ insnslot_llret_4arg_rwflags(long r0, long r1, long r2, long r3, long *cpsr, static void __kprobes simulate_bbl(struct kprobe *p, struct pt_regs *regs) { - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; kprobe_opcode_t insn = p->opcode; long iaddr = (long)p->addr; int disp = branch_displacement(insn); - if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn)) - return; - if (insn & (1 << 24)) regs->ARM_lr = iaddr + 4; @@ -446,14 +443,10 @@ static void __kprobes simulate_blx1(struct kprobe *p, struct pt_regs *regs) static void __kprobes simulate_blx2bx(struct kprobe *p, struct pt_regs *regs) { - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; kprobe_opcode_t insn = p->opcode; int rm = insn & 0xf; long rmv = regs->uregs[rm]; - if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn)) - return; - if (insn & (1 << 5)) regs->ARM_lr = (long)p->addr + 4; @@ -463,9 +456,16 @@ static void __kprobes simulate_blx2bx(struct kprobe *p, struct pt_regs *regs) regs->ARM_cpsr |= PSR_T_BIT; } +static void __kprobes simulate_mrs(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + unsigned long mask = 0xf8ff03df; /* Mask out execution state */ + regs->uregs[rd] = regs->ARM_cpsr & mask; +} + static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs) { - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; kprobe_opcode_t insn = p->opcode; int rn = (insn >> 16) & 0xf; int lbit = insn & (1 << 20); @@ -476,9 +476,6 @@ static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs) int reg_bit_vector; int reg_count; - if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn)) - return; - reg_count = 0; reg_bit_vector = insn & 0xffff; while (reg_bit_vector) { @@ -510,11 +507,6 @@ static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs) static void __kprobes simulate_stm1_pc(struct kprobe *p, struct pt_regs *regs) { - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; - - if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn)) - return; - regs->ARM_pc = (long)p->addr + str_pc_offset; simulate_ldm1stm1(p, regs); regs->ARM_pc = (long)p->addr + 4; @@ -525,24 +517,16 @@ static void __kprobes simulate_mov_ipsp(struct kprobe *p, struct pt_regs *regs) regs->uregs[12] = regs->uregs[13]; } -static void __kprobes emulate_ldcstc(struct kprobe *p, struct pt_regs *regs) -{ - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - int rn = (insn >> 16) & 0xf; - long rnv = regs->uregs[rn]; - - /* Save Rn in case of writeback. */ - regs->uregs[rn] = insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn); -} - static void __kprobes emulate_ldrd(struct kprobe *p, struct pt_regs *regs) { insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; kprobe_opcode_t insn = p->opcode; + long ppc = (long)p->addr + 8; int rd = (insn >> 12) & 0xf; int rn = (insn >> 16) & 0xf; int rm = insn & 0xf; /* rm may be invalid, don't care. */ + long rmv = (rm == 15) ? ppc : regs->uregs[rm]; + long rnv = (rn == 15) ? ppc : regs->uregs[rn]; /* Not following the C calling convention here, so need asm(). */ __asm__ __volatile__ ( @@ -554,29 +538,36 @@ static void __kprobes emulate_ldrd(struct kprobe *p, struct pt_regs *regs) "str r0, %[rn] \n\t" /* in case of writeback */ "str r2, %[rd0] \n\t" "str r3, %[rd1] \n\t" - : [rn] "+m" (regs->uregs[rn]), + : [rn] "+m" (rnv), [rd0] "=m" (regs->uregs[rd]), [rd1] "=m" (regs->uregs[rd+1]) - : [rm] "m" (regs->uregs[rm]), + : [rm] "m" (rmv), [cpsr] "r" (regs->ARM_cpsr), [i_fn] "r" (i_fn) : "r0", "r1", "r2", "r3", "lr", "cc" ); + if (is_writeback(insn)) + regs->uregs[rn] = rnv; } static void __kprobes emulate_strd(struct kprobe *p, struct pt_regs *regs) { insn_4arg_fn_t *i_fn = (insn_4arg_fn_t *)&p->ainsn.insn[0]; kprobe_opcode_t insn = p->opcode; + long ppc = (long)p->addr + 8; int rd = (insn >> 12) & 0xf; int rn = (insn >> 16) & 0xf; int rm = insn & 0xf; - long rnv = regs->uregs[rn]; - long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */ + long rnv = (rn == 15) ? ppc : regs->uregs[rn]; + /* rm/rmv may be invalid, don't care. */ + long rmv = (rm == 15) ? ppc : regs->uregs[rm]; + long rnv_wb; - regs->uregs[rn] = insnslot_4arg_rflags(rnv, rmv, regs->uregs[rd], + rnv_wb = insnslot_4arg_rflags(rnv, rmv, regs->uregs[rd], regs->uregs[rd+1], regs->ARM_cpsr, i_fn); + if (is_writeback(insn)) + regs->uregs[rn] = rnv_wb; } static void __kprobes emulate_ldr(struct kprobe *p, struct pt_regs *regs) @@ -630,31 +621,6 @@ static void __kprobes emulate_str(struct kprobe *p, struct pt_regs *regs) regs->uregs[rn] = rnv_wb; /* Save Rn in case of writeback. */ } -static void __kprobes emulate_mrrc(struct kprobe *p, struct pt_regs *regs) -{ - insn_llret_0arg_fn_t *i_fn = (insn_llret_0arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - union reg_pair fnr; - int rd = (insn >> 12) & 0xf; - int rn = (insn >> 16) & 0xf; - - fnr.dr = insnslot_llret_0arg_rflags(regs->ARM_cpsr, i_fn); - regs->uregs[rn] = fnr.r0; - regs->uregs[rd] = fnr.r1; -} - -static void __kprobes emulate_mcrr(struct kprobe *p, struct pt_regs *regs) -{ - insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - int rd = (insn >> 12) & 0xf; - int rn = (insn >> 16) & 0xf; - long rnv = regs->uregs[rn]; - long rdv = regs->uregs[rd]; - - insnslot_2arg_rflags(rnv, rdv, regs->ARM_cpsr, i_fn); -} - static void __kprobes emulate_sat(struct kprobe *p, struct pt_regs *regs) { insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; @@ -688,32 +654,32 @@ static void __kprobes emulate_none(struct kprobe *p, struct pt_regs *regs) insnslot_0arg_rflags(regs->ARM_cpsr, i_fn); } -static void __kprobes emulate_rd12(struct kprobe *p, struct pt_regs *regs) +static void __kprobes emulate_nop(struct kprobe *p, struct pt_regs *regs) { - insn_0arg_fn_t *i_fn = (insn_0arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - int rd = (insn >> 12) & 0xf; - - regs->uregs[rd] = insnslot_0arg_rflags(regs->ARM_cpsr, i_fn); } -static void __kprobes emulate_ird12(struct kprobe *p, struct pt_regs *regs) +static void __kprobes +emulate_rd12_modify(struct kprobe *p, struct pt_regs *regs) { insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; kprobe_opcode_t insn = p->opcode; - int ird = (insn >> 12) & 0xf; + int rd = (insn >> 12) & 0xf; + long rdv = regs->uregs[rd]; - insnslot_1arg_rflags(regs->uregs[ird], regs->ARM_cpsr, i_fn); + regs->uregs[rd] = insnslot_1arg_rflags(rdv, regs->ARM_cpsr, i_fn); } -static void __kprobes emulate_rn16(struct kprobe *p, struct pt_regs *regs) +static void __kprobes +emulate_rd12rn0_modify(struct kprobe *p, struct pt_regs *regs) { - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; kprobe_opcode_t insn = p->opcode; - int rn = (insn >> 16) & 0xf; + int rd = (insn >> 12) & 0xf; + int rn = insn & 0xf; + long rdv = regs->uregs[rd]; long rnv = regs->uregs[rn]; - insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn); + regs->uregs[rd] = insnslot_2arg_rflags(rdv, rnv, regs->ARM_cpsr, i_fn); } static void __kprobes emulate_rd12rm0(struct kprobe *p, struct pt_regs *regs) @@ -819,6 +785,17 @@ emulate_alu_imm_rwflags(struct kprobe *p, struct pt_regs *regs) } static void __kprobes +emulate_alu_tests_imm(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rn = (insn >> 16) & 0xf; + long rnv = (rn == 15) ? (long)p->addr + 8 : regs->uregs[rn]; + + insnslot_1arg_rwflags(rnv, ®s->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_alu_rflags(struct kprobe *p, struct pt_regs *regs) { insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0]; @@ -854,14 +831,34 @@ emulate_alu_rwflags(struct kprobe *p, struct pt_regs *regs) insnslot_3arg_rwflags(rnv, rmv, rsv, ®s->ARM_cpsr, i_fn); } +static void __kprobes +emulate_alu_tests(struct kprobe *p, struct pt_regs *regs) +{ + insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + long ppc = (long)p->addr + 8; + int rn = (insn >> 16) & 0xf; + int rs = (insn >> 8) & 0xf; /* rs/rsv may be invalid, don't care. */ + int rm = insn & 0xf; + long rnv = (rn == 15) ? ppc : regs->uregs[rn]; + long rmv = (rm == 15) ? ppc : regs->uregs[rm]; + long rsv = regs->uregs[rs]; + + insnslot_3arg_rwflags(rnv, rmv, rsv, ®s->ARM_cpsr, i_fn); +} + static enum kprobe_insn __kprobes prep_emulate_ldr_str(kprobe_opcode_t insn, struct arch_specific_insn *asi) { - int ibit = (insn & (1 << 26)) ? 25 : 22; + int not_imm = (insn & (1 << 26)) ? (insn & (1 << 25)) + : (~insn & (1 << 22)); + + if (is_writeback(insn) && is_r15(insn, 16)) + return INSN_REJECTED; /* Writeback to PC */ insn &= 0xfff00fff; insn |= 0x00001000; /* Rn = r0, Rd = r1 */ - if (insn & (1 << ibit)) { + if (not_imm) { insn &= ~0xf; insn |= 2; /* Rm = r2 */ } @@ -871,20 +868,40 @@ prep_emulate_ldr_str(kprobe_opcode_t insn, struct arch_specific_insn *asi) } static enum kprobe_insn __kprobes -prep_emulate_rd12rm0(kprobe_opcode_t insn, struct arch_specific_insn *asi) +prep_emulate_rd12_modify(kprobe_opcode_t insn, struct arch_specific_insn *asi) { - insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */ + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ + + insn &= 0xffff0fff; /* Rd = r0 */ asi->insn[0] = insn; - asi->insn_handler = emulate_rd12rm0; + asi->insn_handler = emulate_rd12_modify; return INSN_GOOD; } static enum kprobe_insn __kprobes -prep_emulate_rd12(kprobe_opcode_t insn, struct arch_specific_insn *asi) +prep_emulate_rd12rn0_modify(kprobe_opcode_t insn, + struct arch_specific_insn *asi) { - insn &= 0xffff0fff; /* Rd = r0 */ + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ + + insn &= 0xffff0ff0; /* Rd = r0 */ + insn |= 0x00000001; /* Rn = r1 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_rd12rn0_modify; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +prep_emulate_rd12rm0(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ + + insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */ asi->insn[0] = insn; - asi->insn_handler = emulate_rd12; + asi->insn_handler = emulate_rd12rm0; return INSN_GOOD; } @@ -892,6 +909,9 @@ static enum kprobe_insn __kprobes prep_emulate_rd12rn16rm0_wflags(kprobe_opcode_t insn, struct arch_specific_insn *asi) { + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ + insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */ insn |= 0x00000001; /* Rm = r1 */ asi->insn[0] = insn; @@ -903,6 +923,9 @@ static enum kprobe_insn __kprobes prep_emulate_rd16rs8rm0_wflags(kprobe_opcode_t insn, struct arch_specific_insn *asi) { + if (is_r15(insn, 16)) + return INSN_REJECTED; /* Rd is PC */ + insn &= 0xfff0f0f0; /* Rd = r0, Rs = r0 */ insn |= 0x00000001; /* Rm = r1 */ asi->insn[0] = insn; @@ -914,6 +937,9 @@ static enum kprobe_insn __kprobes prep_emulate_rd16rn12rs8rm0_wflags(kprobe_opcode_t insn, struct arch_specific_insn *asi) { + if (is_r15(insn, 16)) + return INSN_REJECTED; /* Rd is PC */ + insn &= 0xfff000f0; /* Rd = r0, Rn = r0 */ insn |= 0x00000102; /* Rs = r1, Rm = r2 */ asi->insn[0] = insn; @@ -925,6 +951,9 @@ static enum kprobe_insn __kprobes prep_emulate_rdhi16rdlo12rs8rm0_wflags(kprobe_opcode_t insn, struct arch_specific_insn *asi) { + if (is_r15(insn, 16) || is_r15(insn, 12)) + return INSN_REJECTED; /* RdHi or RdLo is PC */ + insn &= 0xfff000f0; /* RdHi = r0, RdLo = r1 */ insn |= 0x00001203; /* Rs = r2, Rm = r3 */ asi->insn[0] = insn; @@ -945,20 +974,13 @@ prep_emulate_rdhi16rdlo12rs8rm0_wflags(kprobe_opcode_t insn, static enum kprobe_insn __kprobes space_1111(kprobe_opcode_t insn, struct arch_specific_insn *asi) { - /* CPS mmod == 1 : 1111 0001 0000 xx10 xxxx xxxx xx0x xxxx */ - /* RFE : 1111 100x x0x1 xxxx xxxx 1010 xxxx xxxx */ - /* SRS : 1111 100x x1x0 1101 xxxx 0101 xxxx xxxx */ - if ((insn & 0xfff30020) == 0xf1020000 || - (insn & 0xfe500f00) == 0xf8100a00 || - (insn & 0xfe5f0f00) == 0xf84d0500) - return INSN_REJECTED; - - /* PLD : 1111 01x1 x101 xxxx xxxx xxxx xxxx xxxx : */ - if ((insn & 0xfd700000) == 0xf4500000) { - insn &= 0xfff0ffff; /* Rn = r0 */ - asi->insn[0] = insn; - asi->insn_handler = emulate_rn16; - return INSN_GOOD; + /* memory hint : 1111 0100 x001 xxxx xxxx xxxx xxxx xxxx : */ + /* PLDI : 1111 0100 x101 xxxx xxxx xxxx xxxx xxxx : */ + /* PLDW : 1111 0101 x001 xxxx xxxx xxxx xxxx xxxx : */ + /* PLD : 1111 0101 x101 xxxx xxxx xxxx xxxx xxxx : */ + if ((insn & 0xfe300000) == 0xf4100000) { + asi->insn_handler = emulate_nop; + return INSN_GOOD_NO_SLOT; } /* BLX(1) : 1111 101x xxxx xxxx xxxx xxxx xxxx xxxx : */ @@ -967,41 +989,22 @@ space_1111(kprobe_opcode_t insn, struct arch_specific_insn *asi) return INSN_GOOD_NO_SLOT; } - /* SETEND : 1111 0001 0000 0001 xxxx xxxx 0000 xxxx */ - /* CDP2 : 1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */ - if ((insn & 0xffff00f0) == 0xf1010000 || - (insn & 0xff000010) == 0xfe000000) { - asi->insn[0] = insn; - asi->insn_handler = emulate_none; - return INSN_GOOD; - } + /* CPS : 1111 0001 0000 xxx0 xxxx xxxx xx0x xxxx */ + /* SETEND: 1111 0001 0000 0001 xxxx xxxx 0000 xxxx */ + /* SRS : 1111 100x x1x0 xxxx xxxx xxxx xxxx xxxx */ + /* RFE : 1111 100x x0x1 xxxx xxxx xxxx xxxx xxxx */ + + /* Coprocessor instructions... */ /* MCRR2 : 1111 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */ /* MRRC2 : 1111 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */ - if ((insn & 0xffe00000) == 0xfc400000) { - insn &= 0xfff00fff; /* Rn = r0 */ - insn |= 0x00001000; /* Rd = r1 */ - asi->insn[0] = insn; - asi->insn_handler = - (insn & (1 << 20)) ? emulate_mrrc : emulate_mcrr; - return INSN_GOOD; - } + /* LDC2 : 1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */ + /* STC2 : 1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */ + /* CDP2 : 1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */ + /* MCR2 : 1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */ + /* MRC2 : 1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */ - /* LDC2 : 1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */ - /* STC2 : 1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */ - if ((insn & 0xfe000000) == 0xfc000000) { - insn &= 0xfff0ffff; /* Rn = r0 */ - asi->insn[0] = insn; - asi->insn_handler = emulate_ldcstc; - return INSN_GOOD; - } - - /* MCR2 : 1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */ - /* MRC2 : 1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */ - insn &= 0xffff0fff; /* Rd = r0 */ - asi->insn[0] = insn; - asi->insn_handler = (insn & (1 << 20)) ? emulate_rd12 : emulate_ird12; - return INSN_GOOD; + return INSN_REJECTED; } static enum kprobe_insn __kprobes @@ -1010,19 +1013,18 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* cccc 0001 0xx0 xxxx xxxx xxxx xxxx xxx0 xxxx */ if ((insn & 0x0f900010) == 0x01000000) { - /* BXJ : cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */ - /* MSR : cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */ - if ((insn & 0x0ff000f0) == 0x01200020 || - (insn & 0x0fb000f0) == 0x01200000) - return INSN_REJECTED; - - /* MRS : cccc 0001 0x00 xxxx xxxx xxxx 0000 xxxx */ - if ((insn & 0x0fb00010) == 0x01000000) - return prep_emulate_rd12(insn, asi); + /* MRS cpsr : cccc 0001 0000 xxxx xxxx xxxx 0000 xxxx */ + if ((insn & 0x0ff000f0) == 0x01000000) { + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ + asi->insn_handler = simulate_mrs; + return INSN_GOOD_NO_SLOT; + } /* SMLALxy : cccc 0001 0100 xxxx xxxx xxxx 1xx0 xxxx */ if ((insn & 0x0ff00090) == 0x01400080) - return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi); + return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, + asi); /* SMULWy : cccc 0001 0010 xxxx xxxx xxxx 1x10 xxxx */ /* SMULxy : cccc 0001 0110 xxxx xxxx xxxx 1xx0 xxxx */ @@ -1031,24 +1033,29 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) return prep_emulate_rd16rs8rm0_wflags(insn, asi); /* SMLAxy : cccc 0001 0000 xxxx xxxx xxxx 1xx0 xxxx : Q */ - /* SMLAWy : cccc 0001 0010 xxxx xxxx xxxx 0x00 xxxx : Q */ - return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); + /* SMLAWy : cccc 0001 0010 xxxx xxxx xxxx 1x00 xxxx : Q */ + if ((insn & 0x0ff00090) == 0x01000080 || + (insn & 0x0ff000b0) == 0x01200080) + return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); + + /* BXJ : cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */ + /* MSR : cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */ + /* MRS spsr : cccc 0001 0100 xxxx xxxx xxxx 0000 xxxx */ + /* Other instruction encodings aren't yet defined */ + return INSN_REJECTED; } /* cccc 0001 0xx0 xxxx xxxx xxxx xxxx 0xx1 xxxx */ else if ((insn & 0x0f900090) == 0x01000010) { - /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */ - if ((insn & 0xfff000f0) == 0xe1200070) - return INSN_REJECTED; - /* BLX(2) : cccc 0001 0010 xxxx xxxx xxxx 0011 xxxx */ /* BX : cccc 0001 0010 xxxx xxxx xxxx 0001 xxxx */ if ((insn & 0x0ff000d0) == 0x01200010) { - asi->insn[0] = truecc_insn(insn); + if ((insn & 0x0ff000ff) == 0x0120003f) + return INSN_REJECTED; /* BLX pc */ asi->insn_handler = simulate_blx2bx; - return INSN_GOOD; + return INSN_GOOD_NO_SLOT; } /* CLZ : cccc 0001 0110 xxxx xxxx xxxx 0001 xxxx */ @@ -1059,17 +1066,27 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* QSUB : cccc 0001 0010 xxxx xxxx xxxx 0101 xxxx :Q */ /* QDADD : cccc 0001 0100 xxxx xxxx xxxx 0101 xxxx :Q */ /* QDSUB : cccc 0001 0110 xxxx xxxx xxxx 0101 xxxx :Q */ - return prep_emulate_rd12rn16rm0_wflags(insn, asi); + if ((insn & 0x0f9000f0) == 0x01000050) + return prep_emulate_rd12rn16rm0_wflags(insn, asi); + + /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */ + /* SMC : cccc 0001 0110 xxxx xxxx xxxx 0111 xxxx */ + + /* Other instruction encodings aren't yet defined */ + return INSN_REJECTED; } /* cccc 0000 xxxx xxxx xxxx xxxx xxxx 1001 xxxx */ - else if ((insn & 0x0f000090) == 0x00000090) { + else if ((insn & 0x0f0000f0) == 0x00000090) { /* MUL : cccc 0000 0000 xxxx xxxx xxxx 1001 xxxx : */ /* MULS : cccc 0000 0001 xxxx xxxx xxxx 1001 xxxx :cc */ /* MLA : cccc 0000 0010 xxxx xxxx xxxx 1001 xxxx : */ /* MLAS : cccc 0000 0011 xxxx xxxx xxxx 1001 xxxx :cc */ /* UMAAL : cccc 0000 0100 xxxx xxxx xxxx 1001 xxxx : */ + /* undef : cccc 0000 0101 xxxx xxxx xxxx 1001 xxxx : */ + /* MLS : cccc 0000 0110 xxxx xxxx xxxx 1001 xxxx : */ + /* undef : cccc 0000 0111 xxxx xxxx xxxx 1001 xxxx : */ /* UMULL : cccc 0000 1000 xxxx xxxx xxxx 1001 xxxx : */ /* UMULLS : cccc 0000 1001 xxxx xxxx xxxx 1001 xxxx :cc */ /* UMLAL : cccc 0000 1010 xxxx xxxx xxxx 1001 xxxx : */ @@ -1078,13 +1095,15 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* SMULLS : cccc 0000 1101 xxxx xxxx xxxx 1001 xxxx :cc */ /* SMLAL : cccc 0000 1110 xxxx xxxx xxxx 1001 xxxx : */ /* SMLALS : cccc 0000 1111 xxxx xxxx xxxx 1001 xxxx :cc */ - if ((insn & 0x0fe000f0) == 0x00000090) { - return prep_emulate_rd16rs8rm0_wflags(insn, asi); - } else if ((insn & 0x0fe000f0) == 0x00200090) { - return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); - } else { - return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi); - } + if ((insn & 0x00d00000) == 0x00500000) + return INSN_REJECTED; + else if ((insn & 0x00e00000) == 0x00000000) + return prep_emulate_rd16rs8rm0_wflags(insn, asi); + else if ((insn & 0x00a00000) == 0x00200000) + return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); + else + return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, + asi); } /* cccc 000x xxxx xxxx xxxx xxxx xxxx 1xx1 xxxx */ @@ -1092,23 +1111,45 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* SWP : cccc 0001 0000 xxxx xxxx xxxx 1001 xxxx */ /* SWPB : cccc 0001 0100 xxxx xxxx xxxx 1001 xxxx */ - /* LDRD : cccc 000x xxx0 xxxx xxxx xxxx 1101 xxxx */ - /* STRD : cccc 000x xxx0 xxxx xxxx xxxx 1111 xxxx */ + /* ??? : cccc 0001 0x01 xxxx xxxx xxxx 1001 xxxx */ + /* ??? : cccc 0001 0x10 xxxx xxxx xxxx 1001 xxxx */ + /* ??? : cccc 0001 0x11 xxxx xxxx xxxx 1001 xxxx */ /* STREX : cccc 0001 1000 xxxx xxxx xxxx 1001 xxxx */ /* LDREX : cccc 0001 1001 xxxx xxxx xxxx 1001 xxxx */ + /* STREXD: cccc 0001 1010 xxxx xxxx xxxx 1001 xxxx */ + /* LDREXD: cccc 0001 1011 xxxx xxxx xxxx 1001 xxxx */ + /* STREXB: cccc 0001 1100 xxxx xxxx xxxx 1001 xxxx */ + /* LDREXB: cccc 0001 1101 xxxx xxxx xxxx 1001 xxxx */ + /* STREXH: cccc 0001 1110 xxxx xxxx xxxx 1001 xxxx */ + /* LDREXH: cccc 0001 1111 xxxx xxxx xxxx 1001 xxxx */ + + /* LDRD : cccc 000x xxx0 xxxx xxxx xxxx 1101 xxxx */ + /* STRD : cccc 000x xxx0 xxxx xxxx xxxx 1111 xxxx */ /* LDRH : cccc 000x xxx1 xxxx xxxx xxxx 1011 xxxx */ /* STRH : cccc 000x xxx0 xxxx xxxx xxxx 1011 xxxx */ /* LDRSB : cccc 000x xxx1 xxxx xxxx xxxx 1101 xxxx */ /* LDRSH : cccc 000x xxx1 xxxx xxxx xxxx 1111 xxxx */ - if ((insn & 0x0fb000f0) == 0x01000090) { - /* SWP/SWPB */ - return prep_emulate_rd12rn16rm0_wflags(insn, asi); + if ((insn & 0x0f0000f0) == 0x01000090) { + if ((insn & 0x0fb000f0) == 0x01000090) { + /* SWP/SWPB */ + return prep_emulate_rd12rn16rm0_wflags(insn, + asi); + } else { + /* STREX/LDREX variants and unallocaed space */ + return INSN_REJECTED; + } + } else if ((insn & 0x0e1000d0) == 0x00000d0) { /* STRD/LDRD */ + if ((insn & 0x0000e000) == 0x0000e000) + return INSN_REJECTED; /* Rd is LR or PC */ + if (is_writeback(insn) && is_r15(insn, 16)) + return INSN_REJECTED; /* Writeback to PC */ + insn &= 0xfff00fff; insn |= 0x00002000; /* Rn = r0, Rd = r2 */ - if (insn & (1 << 22)) { - /* I bit */ + if (!(insn & (1 << 22))) { + /* Register index */ insn &= ~0xf; insn |= 1; /* Rm = r1 */ } @@ -1118,6 +1159,9 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) return INSN_GOOD; } + /* LDRH/STRH/LDRSB/LDRSH */ + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ return prep_emulate_ldr_str(insn, asi); } @@ -1125,7 +1169,7 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* * ALU op with S bit and Rd == 15 : - * cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx + * cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx */ if ((insn & 0x0e10f000) == 0x0010f000) return INSN_REJECTED; @@ -1154,22 +1198,61 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) insn |= 0x00000200; /* Rs = r2 */ } asi->insn[0] = insn; - asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ + + if ((insn & 0x0f900000) == 0x01100000) { + /* + * TST : cccc 0001 0001 xxxx xxxx xxxx xxxx xxxx + * TEQ : cccc 0001 0011 xxxx xxxx xxxx xxxx xxxx + * CMP : cccc 0001 0101 xxxx xxxx xxxx xxxx xxxx + * CMN : cccc 0001 0111 xxxx xxxx xxxx xxxx xxxx + */ + asi->insn_handler = emulate_alu_tests; + } else { + /* ALU ops which write to Rd */ + asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ emulate_alu_rwflags : emulate_alu_rflags; + } return INSN_GOOD; } static enum kprobe_insn __kprobes space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi) { + /* MOVW : cccc 0011 0000 xxxx xxxx xxxx xxxx xxxx */ + /* MOVT : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx */ + if ((insn & 0x0fb00000) == 0x03000000) + return prep_emulate_rd12_modify(insn, asi); + + /* hints : cccc 0011 0010 0000 xxxx xxxx xxxx xxxx */ + if ((insn & 0x0fff0000) == 0x03200000) { + unsigned op2 = insn & 0x000000ff; + if (op2 == 0x01 || op2 == 0x04) { + /* YIELD : cccc 0011 0010 0000 xxxx xxxx 0000 0001 */ + /* SEV : cccc 0011 0010 0000 xxxx xxxx 0000 0100 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_none; + return INSN_GOOD; + } else if (op2 <= 0x03) { + /* NOP : cccc 0011 0010 0000 xxxx xxxx 0000 0000 */ + /* WFE : cccc 0011 0010 0000 xxxx xxxx 0000 0010 */ + /* WFI : cccc 0011 0010 0000 xxxx xxxx 0000 0011 */ + /* + * We make WFE and WFI true NOPs to avoid stalls due + * to missing events whilst processing the probe. + */ + asi->insn_handler = emulate_nop; + return INSN_GOOD_NO_SLOT; + } + /* For DBG and unallocated hints it's safest to reject them */ + return INSN_REJECTED; + } + /* * MSR : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx - * Undef : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx * ALU op with S bit and Rd == 15 : * cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx */ if ((insn & 0x0fb00000) == 0x03200000 || /* MSR */ - (insn & 0x0ff00000) == 0x03400000 || /* Undef */ (insn & 0x0e10f000) == 0x0210f000) /* ALU s-bit, R15 */ return INSN_REJECTED; @@ -1180,10 +1263,22 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi) * *S (bit 20) updates condition codes * ADC/SBC/RSC reads the C flag */ - insn &= 0xffff0fff; /* Rd = r0 */ + insn &= 0xfff00fff; /* Rn = r0 and Rd = r0 */ asi->insn[0] = insn; - asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ + + if ((insn & 0x0f900000) == 0x03100000) { + /* + * TST : cccc 0011 0001 xxxx xxxx xxxx xxxx xxxx + * TEQ : cccc 0011 0011 xxxx xxxx xxxx xxxx xxxx + * CMP : cccc 0011 0101 xxxx xxxx xxxx xxxx xxxx + * CMN : cccc 0011 0111 xxxx xxxx xxxx xxxx xxxx + */ + asi->insn_handler = emulate_alu_tests_imm; + } else { + /* ALU ops which write to Rd */ + asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ emulate_alu_imm_rwflags : emulate_alu_imm_rflags; + } return INSN_GOOD; } @@ -1192,6 +1287,8 @@ space_cccc_0110__1(kprobe_opcode_t insn, struct arch_specific_insn *asi) { /* SEL : cccc 0110 1000 xxxx xxxx xxxx 1011 xxxx GE: !!! */ if ((insn & 0x0ff000f0) == 0x068000b0) { + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */ insn |= 0x00000001; /* Rm = r1 */ asi->insn[0] = insn; @@ -1205,6 +1302,8 @@ space_cccc_0110__1(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* USAT16 : cccc 0110 1110 xxxx xxxx xxxx 0011 xxxx :Q */ if ((insn & 0x0fa00030) == 0x06a00010 || (insn & 0x0fb000f0) == 0x06a00030) { + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */ asi->insn[0] = insn; asi->insn_handler = emulate_sat; @@ -1213,57 +1312,101 @@ space_cccc_0110__1(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* REV : cccc 0110 1011 xxxx xxxx xxxx 0011 xxxx */ /* REV16 : cccc 0110 1011 xxxx xxxx xxxx 1011 xxxx */ + /* RBIT : cccc 0110 1111 xxxx xxxx xxxx 0011 xxxx */ /* REVSH : cccc 0110 1111 xxxx xxxx xxxx 1011 xxxx */ if ((insn & 0x0ff00070) == 0x06b00030 || - (insn & 0x0ff000f0) == 0x06f000b0) + (insn & 0x0ff00070) == 0x06f00030) return prep_emulate_rd12rm0(insn, asi); + /* ??? : cccc 0110 0000 xxxx xxxx xxxx xxx1 xxxx : */ /* SADD16 : cccc 0110 0001 xxxx xxxx xxxx 0001 xxxx :GE */ /* SADDSUBX : cccc 0110 0001 xxxx xxxx xxxx 0011 xxxx :GE */ /* SSUBADDX : cccc 0110 0001 xxxx xxxx xxxx 0101 xxxx :GE */ /* SSUB16 : cccc 0110 0001 xxxx xxxx xxxx 0111 xxxx :GE */ /* SADD8 : cccc 0110 0001 xxxx xxxx xxxx 1001 xxxx :GE */ + /* ??? : cccc 0110 0001 xxxx xxxx xxxx 1011 xxxx : */ + /* ??? : cccc 0110 0001 xxxx xxxx xxxx 1101 xxxx : */ /* SSUB8 : cccc 0110 0001 xxxx xxxx xxxx 1111 xxxx :GE */ /* QADD16 : cccc 0110 0010 xxxx xxxx xxxx 0001 xxxx : */ /* QADDSUBX : cccc 0110 0010 xxxx xxxx xxxx 0011 xxxx : */ /* QSUBADDX : cccc 0110 0010 xxxx xxxx xxxx 0101 xxxx : */ /* QSUB16 : cccc 0110 0010 xxxx xxxx xxxx 0111 xxxx : */ /* QADD8 : cccc 0110 0010 xxxx xxxx xxxx 1001 xxxx : */ + /* ??? : cccc 0110 0010 xxxx xxxx xxxx 1011 xxxx : */ + /* ??? : cccc 0110 0010 xxxx xxxx xxxx 1101 xxxx : */ /* QSUB8 : cccc 0110 0010 xxxx xxxx xxxx 1111 xxxx : */ /* SHADD16 : cccc 0110 0011 xxxx xxxx xxxx 0001 xxxx : */ /* SHADDSUBX : cccc 0110 0011 xxxx xxxx xxxx 0011 xxxx : */ /* SHSUBADDX : cccc 0110 0011 xxxx xxxx xxxx 0101 xxxx : */ /* SHSUB16 : cccc 0110 0011 xxxx xxxx xxxx 0111 xxxx : */ /* SHADD8 : cccc 0110 0011 xxxx xxxx xxxx 1001 xxxx : */ + /* ??? : cccc 0110 0011 xxxx xxxx xxxx 1011 xxxx : */ + /* ??? : cccc 0110 0011 xxxx xxxx xxxx 1101 xxxx : */ /* SHSUB8 : cccc 0110 0011 xxxx xxxx xxxx 1111 xxxx : */ + /* ??? : cccc 0110 0100 xxxx xxxx xxxx xxx1 xxxx : */ /* UADD16 : cccc 0110 0101 xxxx xxxx xxxx 0001 xxxx :GE */ /* UADDSUBX : cccc 0110 0101 xxxx xxxx xxxx 0011 xxxx :GE */ /* USUBADDX : cccc 0110 0101 xxxx xxxx xxxx 0101 xxxx :GE */ /* USUB16 : cccc 0110 0101 xxxx xxxx xxxx 0111 xxxx :GE */ /* UADD8 : cccc 0110 0101 xxxx xxxx xxxx 1001 xxxx :GE */ + /* ??? : cccc 0110 0101 xxxx xxxx xxxx 1011 xxxx : */ + /* ??? : cccc 0110 0101 xxxx xxxx xxxx 1101 xxxx : */ /* USUB8 : cccc 0110 0101 xxxx xxxx xxxx 1111 xxxx :GE */ /* UQADD16 : cccc 0110 0110 xxxx xxxx xxxx 0001 xxxx : */ /* UQADDSUBX : cccc 0110 0110 xxxx xxxx xxxx 0011 xxxx : */ /* UQSUBADDX : cccc 0110 0110 xxxx xxxx xxxx 0101 xxxx : */ /* UQSUB16 : cccc 0110 0110 xxxx xxxx xxxx 0111 xxxx : */ /* UQADD8 : cccc 0110 0110 xxxx xxxx xxxx 1001 xxxx : */ + /* ??? : cccc 0110 0110 xxxx xxxx xxxx 1011 xxxx : */ + /* ??? : cccc 0110 0110 xxxx xxxx xxxx 1101 xxxx : */ /* UQSUB8 : cccc 0110 0110 xxxx xxxx xxxx 1111 xxxx : */ /* UHADD16 : cccc 0110 0111 xxxx xxxx xxxx 0001 xxxx : */ /* UHADDSUBX : cccc 0110 0111 xxxx xxxx xxxx 0011 xxxx : */ /* UHSUBADDX : cccc 0110 0111 xxxx xxxx xxxx 0101 xxxx : */ /* UHSUB16 : cccc 0110 0111 xxxx xxxx xxxx 0111 xxxx : */ /* UHADD8 : cccc 0110 0111 xxxx xxxx xxxx 1001 xxxx : */ + /* ??? : cccc 0110 0111 xxxx xxxx xxxx 1011 xxxx : */ + /* ??? : cccc 0110 0111 xxxx xxxx xxxx 1101 xxxx : */ /* UHSUB8 : cccc 0110 0111 xxxx xxxx xxxx 1111 xxxx : */ + if ((insn & 0x0f800010) == 0x06000010) { + if ((insn & 0x00300000) == 0x00000000 || + (insn & 0x000000e0) == 0x000000a0 || + (insn & 0x000000e0) == 0x000000c0) + return INSN_REJECTED; /* Unallocated space */ + return prep_emulate_rd12rn16rm0_wflags(insn, asi); + } + /* PKHBT : cccc 0110 1000 xxxx xxxx xxxx x001 xxxx : */ /* PKHTB : cccc 0110 1000 xxxx xxxx xxxx x101 xxxx : */ + if ((insn & 0x0ff00030) == 0x06800010) + return prep_emulate_rd12rn16rm0_wflags(insn, asi); + /* SXTAB16 : cccc 0110 1000 xxxx xxxx xxxx 0111 xxxx : */ - /* SXTB : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx : */ + /* SXTB16 : cccc 0110 1000 1111 xxxx xxxx 0111 xxxx : */ + /* ??? : cccc 0110 1001 xxxx xxxx xxxx 0111 xxxx : */ /* SXTAB : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx : */ + /* SXTB : cccc 0110 1010 1111 xxxx xxxx 0111 xxxx : */ /* SXTAH : cccc 0110 1011 xxxx xxxx xxxx 0111 xxxx : */ + /* SXTH : cccc 0110 1011 1111 xxxx xxxx 0111 xxxx : */ /* UXTAB16 : cccc 0110 1100 xxxx xxxx xxxx 0111 xxxx : */ + /* UXTB16 : cccc 0110 1100 1111 xxxx xxxx 0111 xxxx : */ + /* ??? : cccc 0110 1101 xxxx xxxx xxxx 0111 xxxx : */ /* UXTAB : cccc 0110 1110 xxxx xxxx xxxx 0111 xxxx : */ + /* UXTB : cccc 0110 1110 1111 xxxx xxxx 0111 xxxx : */ /* UXTAH : cccc 0110 1111 xxxx xxxx xxxx 0111 xxxx : */ - return prep_emulate_rd12rn16rm0_wflags(insn, asi); + /* UXTH : cccc 0110 1111 1111 xxxx xxxx 0111 xxxx : */ + if ((insn & 0x0f8000f0) == 0x06800070) { + if ((insn & 0x00300000) == 0x00100000) + return INSN_REJECTED; /* Unallocated space */ + + if ((insn & 0x000f0000) == 0x000f0000) + return prep_emulate_rd12rm0(insn, asi); + else + return prep_emulate_rd12rn16rm0_wflags(insn, asi); + } + + /* Other instruction encodings aren't yet defined */ + return INSN_REJECTED; } static enum kprobe_insn __kprobes @@ -1273,29 +1416,49 @@ space_cccc_0111__1(kprobe_opcode_t insn, struct arch_specific_insn *asi) if ((insn & 0x0ff000f0) == 0x03f000f0) return INSN_REJECTED; - /* USADA8 : cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx */ - /* USAD8 : cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx */ - if ((insn & 0x0ff000f0) == 0x07800010) - return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); - /* SMLALD : cccc 0111 0100 xxxx xxxx xxxx 00x1 xxxx */ /* SMLSLD : cccc 0111 0100 xxxx xxxx xxxx 01x1 xxxx */ if ((insn & 0x0ff00090) == 0x07400010) return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi); /* SMLAD : cccc 0111 0000 xxxx xxxx xxxx 00x1 xxxx :Q */ + /* SMUAD : cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx :Q */ /* SMLSD : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx :Q */ + /* SMUSD : cccc 0111 0000 xxxx 1111 xxxx 01x1 xxxx : */ /* SMMLA : cccc 0111 0101 xxxx xxxx xxxx 00x1 xxxx : */ - /* SMMLS : cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx : */ + /* SMMUL : cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx : */ + /* USADA8 : cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx : */ + /* USAD8 : cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx : */ if ((insn & 0x0ff00090) == 0x07000010 || (insn & 0x0ff000d0) == 0x07500010 || - (insn & 0x0ff000d0) == 0x075000d0) + (insn & 0x0ff000f0) == 0x07800010) { + + if ((insn & 0x0000f000) == 0x0000f000) + return prep_emulate_rd16rs8rm0_wflags(insn, asi); + else + return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); + } + + /* SMMLS : cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx : */ + if ((insn & 0x0ff000d0) == 0x075000d0) return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); - /* SMUSD : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx : */ - /* SMUAD : cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx :Q */ - /* SMMUL : cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx : */ - return prep_emulate_rd16rs8rm0_wflags(insn, asi); + /* SBFX : cccc 0111 101x xxxx xxxx xxxx x101 xxxx : */ + /* UBFX : cccc 0111 111x xxxx xxxx xxxx x101 xxxx : */ + if ((insn & 0x0fa00070) == 0x07a00050) + return prep_emulate_rd12rm0(insn, asi); + + /* BFI : cccc 0111 110x xxxx xxxx xxxx x001 xxxx : */ + /* BFC : cccc 0111 110x xxxx xxxx xxxx x001 1111 : */ + if ((insn & 0x0fe00070) == 0x07c00010) { + + if ((insn & 0x0000000f) == 0x0000000f) + return prep_emulate_rd12_modify(insn, asi); + else + return prep_emulate_rd12rn0_modify(insn, asi); + } + + return INSN_REJECTED; } static enum kprobe_insn __kprobes @@ -1309,6 +1472,10 @@ space_cccc_01xx(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* STRB : cccc 01xx x1x0 xxxx xxxx xxxx xxxx xxxx */ /* STRBT : cccc 01x0 x110 xxxx xxxx xxxx xxxx xxxx */ /* STRT : cccc 01x0 x010 xxxx xxxx xxxx xxxx xxxx */ + + if ((insn & 0x00500000) == 0x00500000 && is_r15(insn, 12)) + return INSN_REJECTED; /* LDRB into PC */ + return prep_emulate_ldr_str(insn, asi); } @@ -1323,10 +1490,9 @@ space_cccc_100x(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* LDM(1) : cccc 100x x0x1 xxxx xxxx xxxx xxxx xxxx */ /* STM(1) : cccc 100x x0x0 xxxx xxxx xxxx xxxx xxxx */ - asi->insn[0] = truecc_insn(insn); asi->insn_handler = ((insn & 0x108000) == 0x008000) ? /* STM & R15 */ simulate_stm1_pc : simulate_ldm1stm1; - return INSN_GOOD; + return INSN_GOOD_NO_SLOT; } static enum kprobe_insn __kprobes @@ -1334,58 +1500,117 @@ space_cccc_101x(kprobe_opcode_t insn, struct arch_specific_insn *asi) { /* B : cccc 1010 xxxx xxxx xxxx xxxx xxxx xxxx */ /* BL : cccc 1011 xxxx xxxx xxxx xxxx xxxx xxxx */ - asi->insn[0] = truecc_insn(insn); asi->insn_handler = simulate_bbl; - return INSN_GOOD; + return INSN_GOOD_NO_SLOT; } static enum kprobe_insn __kprobes -space_cccc_1100_010x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +space_cccc_11xx(kprobe_opcode_t insn, struct arch_specific_insn *asi) { + /* Coprocessor instructions... */ /* MCRR : cccc 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */ /* MRRC : cccc 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */ - insn &= 0xfff00fff; - insn |= 0x00001000; /* Rn = r0, Rd = r1 */ - asi->insn[0] = insn; - asi->insn_handler = (insn & (1 << 20)) ? emulate_mrrc : emulate_mcrr; - return INSN_GOOD; + /* LDC : cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */ + /* STC : cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */ + /* CDP : cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */ + /* MCR : cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */ + /* MRC : cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */ + + /* SVC : cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */ + + return INSN_REJECTED; } -static enum kprobe_insn __kprobes -space_cccc_110x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +static unsigned long __kprobes __check_eq(unsigned long cpsr) { - /* LDC : cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */ - /* STC : cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */ - insn &= 0xfff0ffff; /* Rn = r0 */ - asi->insn[0] = insn; - asi->insn_handler = emulate_ldcstc; - return INSN_GOOD; + return cpsr & PSR_Z_BIT; } -static enum kprobe_insn __kprobes -space_cccc_111x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +static unsigned long __kprobes __check_ne(unsigned long cpsr) { - /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */ - /* SWI : cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */ - if ((insn & 0xfff000f0) == 0xe1200070 || - (insn & 0x0f000000) == 0x0f000000) - return INSN_REJECTED; + return (~cpsr) & PSR_Z_BIT; +} - /* CDP : cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */ - if ((insn & 0x0f000010) == 0x0e000000) { - asi->insn[0] = insn; - asi->insn_handler = emulate_none; - return INSN_GOOD; - } +static unsigned long __kprobes __check_cs(unsigned long cpsr) +{ + return cpsr & PSR_C_BIT; +} - /* MCR : cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */ - /* MRC : cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */ - insn &= 0xffff0fff; /* Rd = r0 */ - asi->insn[0] = insn; - asi->insn_handler = (insn & (1 << 20)) ? emulate_rd12 : emulate_ird12; - return INSN_GOOD; +static unsigned long __kprobes __check_cc(unsigned long cpsr) +{ + return (~cpsr) & PSR_C_BIT; +} + +static unsigned long __kprobes __check_mi(unsigned long cpsr) +{ + return cpsr & PSR_N_BIT; +} + +static unsigned long __kprobes __check_pl(unsigned long cpsr) +{ + return (~cpsr) & PSR_N_BIT; +} + +static unsigned long __kprobes __check_vs(unsigned long cpsr) +{ + return cpsr & PSR_V_BIT; +} + +static unsigned long __kprobes __check_vc(unsigned long cpsr) +{ + return (~cpsr) & PSR_V_BIT; +} + +static unsigned long __kprobes __check_hi(unsigned long cpsr) +{ + cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */ + return cpsr & PSR_C_BIT; } +static unsigned long __kprobes __check_ls(unsigned long cpsr) +{ + cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */ + return (~cpsr) & PSR_C_BIT; +} + +static unsigned long __kprobes __check_ge(unsigned long cpsr) +{ + cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + return (~cpsr) & PSR_N_BIT; +} + +static unsigned long __kprobes __check_lt(unsigned long cpsr) +{ + cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + return cpsr & PSR_N_BIT; +} + +static unsigned long __kprobes __check_gt(unsigned long cpsr) +{ + unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */ + return (~temp) & PSR_N_BIT; +} + +static unsigned long __kprobes __check_le(unsigned long cpsr) +{ + unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */ + return temp & PSR_N_BIT; +} + +static unsigned long __kprobes __check_al(unsigned long cpsr) +{ + return true; +} + +static kprobe_check_cc * const condition_checks[16] = { + &__check_eq, &__check_ne, &__check_cs, &__check_cc, + &__check_mi, &__check_pl, &__check_vs, &__check_vc, + &__check_hi, &__check_ls, &__check_ge, &__check_lt, + &__check_gt, &__check_le, &__check_al, &__check_al +}; + /* Return: * INSN_REJECTED If instruction is one not allowed to kprobe, * INSN_GOOD If instruction is supported and uses instruction slot, @@ -1401,133 +1626,45 @@ space_cccc_111x(kprobe_opcode_t insn, struct arch_specific_insn *asi) enum kprobe_insn __kprobes arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi) { + asi->insn_check_cc = condition_checks[insn>>28]; asi->insn[1] = KPROBE_RETURN_INSTRUCTION; - if ((insn & 0xf0000000) == 0xf0000000) { + if ((insn & 0xf0000000) == 0xf0000000) return space_1111(insn, asi); - } else if ((insn & 0x0e000000) == 0x00000000) { + else if ((insn & 0x0e000000) == 0x00000000) return space_cccc_000x(insn, asi); - } else if ((insn & 0x0e000000) == 0x02000000) { + else if ((insn & 0x0e000000) == 0x02000000) return space_cccc_001x(insn, asi); - } else if ((insn & 0x0f000010) == 0x06000010) { + else if ((insn & 0x0f000010) == 0x06000010) return space_cccc_0110__1(insn, asi); - } else if ((insn & 0x0f000010) == 0x07000010) { + else if ((insn & 0x0f000010) == 0x07000010) return space_cccc_0111__1(insn, asi); - } else if ((insn & 0x0c000000) == 0x04000000) { + else if ((insn & 0x0c000000) == 0x04000000) return space_cccc_01xx(insn, asi); - } else if ((insn & 0x0e000000) == 0x08000000) { + else if ((insn & 0x0e000000) == 0x08000000) return space_cccc_100x(insn, asi); - } else if ((insn & 0x0e000000) == 0x0a000000) { + else if ((insn & 0x0e000000) == 0x0a000000) return space_cccc_101x(insn, asi); - } else if ((insn & 0x0fe00000) == 0x0c400000) { - - return space_cccc_1100_010x(insn, asi); - - } else if ((insn & 0x0e000000) == 0x0c000000) { - - return space_cccc_110x(insn, asi); - - } - - return space_cccc_111x(insn, asi); + return space_cccc_11xx(insn, asi); } void __init arm_kprobe_decode_init(void) { find_str_pc_offset(); } - - -/* - * All ARM instructions listed below. - * - * Instructions and their general purpose registers are given. - * If a particular register may not use R15, it is prefixed with a "!". - * If marked with a "*" means the value returned by reading R15 - * is implementation defined. - * - * ADC/ADD/AND/BIC/CMN/CMP/EOR/MOV/MVN/ORR/RSB/RSC/SBC/SUB/TEQ - * TST: Rd, Rn, Rm, !Rs - * BX: Rm - * BLX(2): !Rm - * BX: Rm (R15 legal, but discouraged) - * BXJ: !Rm, - * CLZ: !Rd, !Rm - * CPY: Rd, Rm - * LDC/2,STC/2 immediate offset & unindex: Rn - * LDC/2,STC/2 immediate pre/post-indexed: !Rn - * LDM(1/3): !Rn, register_list - * LDM(2): !Rn, !register_list - * LDR,STR,PLD immediate offset: Rd, Rn - * LDR,STR,PLD register offset: Rd, Rn, !Rm - * LDR,STR,PLD scaled register offset: Rd, !Rn, !Rm - * LDR,STR immediate pre/post-indexed: Rd, !Rn - * LDR,STR register pre/post-indexed: Rd, !Rn, !Rm - * LDR,STR scaled register pre/post-indexed: Rd, !Rn, !Rm - * LDRB,STRB immediate offset: !Rd, Rn - * LDRB,STRB register offset: !Rd, Rn, !Rm - * LDRB,STRB scaled register offset: !Rd, !Rn, !Rm - * LDRB,STRB immediate pre/post-indexed: !Rd, !Rn - * LDRB,STRB register pre/post-indexed: !Rd, !Rn, !Rm - * LDRB,STRB scaled register pre/post-indexed: !Rd, !Rn, !Rm - * LDRT,LDRBT,STRBT immediate pre/post-indexed: !Rd, !Rn - * LDRT,LDRBT,STRBT register pre/post-indexed: !Rd, !Rn, !Rm - * LDRT,LDRBT,STRBT scaled register pre/post-indexed: !Rd, !Rn, !Rm - * LDRH/SH/SB/D,STRH/SH/SB/D immediate offset: !Rd, Rn - * LDRH/SH/SB/D,STRH/SH/SB/D register offset: !Rd, Rn, !Rm - * LDRH/SH/SB/D,STRH/SH/SB/D immediate pre/post-indexed: !Rd, !Rn - * LDRH/SH/SB/D,STRH/SH/SB/D register pre/post-indexed: !Rd, !Rn, !Rm - * LDREX: !Rd, !Rn - * MCR/2: !Rd - * MCRR/2,MRRC/2: !Rd, !Rn - * MLA: !Rd, !Rn, !Rm, !Rs - * MOV: Rd - * MRC/2: !Rd (if Rd==15, only changes cond codes, not the register) - * MRS,MSR: !Rd - * MUL: !Rd, !Rm, !Rs - * PKH{BT,TB}: !Rd, !Rn, !Rm - * QDADD,[U]QADD/16/8/SUBX: !Rd, !Rm, !Rn - * QDSUB,[U]QSUB/16/8/ADDX: !Rd, !Rm, !Rn - * REV/16/SH: !Rd, !Rm - * RFE: !Rn - * {S,U}[H]ADD{16,8,SUBX},{S,U}[H]SUB{16,8,ADDX}: !Rd, !Rn, !Rm - * SEL: !Rd, !Rn, !Rm - * SMLA<x><y>,SMLA{D,W<y>},SMLSD,SMML{A,S}: !Rd, !Rn, !Rm, !Rs - * SMLAL<x><y>,SMLA{D,LD},SMLSLD,SMMULL,SMULW<y>: !RdHi, !RdLo, !Rm, !Rs - * SMMUL,SMUAD,SMUL<x><y>,SMUSD: !Rd, !Rm, !Rs - * SSAT/16: !Rd, !Rm - * STM(1/2): !Rn, register_list* (R15 in reg list not recommended) - * STRT immediate pre/post-indexed: Rd*, !Rn - * STRT register pre/post-indexed: Rd*, !Rn, !Rm - * STRT scaled register pre/post-indexed: Rd*, !Rn, !Rm - * STREX: !Rd, !Rn, !Rm - * SWP/B: !Rd, !Rn, !Rm - * {S,U}XTA{B,B16,H}: !Rd, !Rn, !Rm - * {S,U}XT{B,B16,H}: !Rd, !Rm - * UM{AA,LA,UL}L: !RdHi, !RdLo, !Rm, !Rs - * USA{D8,A8,T,T16}: !Rd, !Rm, !Rs - * - * May transfer control by writing R15 (possible mode changes or alternate - * mode accesses marked by "*"): - * ALU op (* with s-bit), B, BL, BKPT, BLX(1/2), BX, BXJ, CPS*, CPY, - * LDM(1), LDM(2/3)*, LDR, MOV, RFE*, SWI* - * - * Instructions that do not take general registers, nor transfer control: - * CDP/2, SETEND, SRS* - */ diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c index 2ba7deb3072..1656c87501c 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/kernel/kprobes.c @@ -134,7 +134,8 @@ static void __kprobes singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) { regs->ARM_pc += 4; - p->ainsn.insn_handler(p, regs); + if (p->ainsn.insn_check_cc(regs->ARM_cpsr)) + p->ainsn.insn_handler(p, regs); } /* diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 69cfee0fe00..139e3c82736 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -221,7 +221,7 @@ again: prev_raw_count &= armpmu->max_period; if (overflow) - delta = armpmu->max_period - prev_raw_count + new_raw_count; + delta = armpmu->max_period - prev_raw_count + new_raw_count + 1; else delta = new_raw_count - prev_raw_count; @@ -746,7 +746,8 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) tail = (struct frame_tail __user *)regs->ARM_fp - 1; - while (tail && !((unsigned long)tail & 0x3)) + while ((entry->nr < PERF_MAX_STACK_DEPTH) && + tail && !((unsigned long)tail & 0x3)) tail = user_backtrace(tail, entry); } diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 94bbedbed63..5e1e5419722 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -372,6 +372,8 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start, if (clone_flags & CLONE_SETTLS) thread->tp_value = regs->ARM_r3; + thread_notify(THREAD_NOTIFY_COPY, thread); + return 0; } diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 2bf27f364d0..8182f45ca49 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -767,12 +767,20 @@ long arch_ptrace(struct task_struct *child, long request, #ifdef CONFIG_HAVE_HW_BREAKPOINT case PTRACE_GETHBPREGS: + if (ptrace_get_breakpoints(child) < 0) + return -ESRCH; + ret = ptrace_gethbpregs(child, addr, (unsigned long __user *)data); + ptrace_put_breakpoints(child); break; case PTRACE_SETHBPREGS: + if (ptrace_get_breakpoints(child) < 0) + return -ESRCH; + ret = ptrace_sethbpregs(child, addr, (unsigned long __user *)data); + ptrace_put_breakpoints(child); break; #endif diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index cb839831764..0340224cf73 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -597,19 +597,13 @@ setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info, return err; } -static inline void setup_syscall_restart(struct pt_regs *regs) -{ - regs->ARM_r0 = regs->ARM_ORIG_r0; - regs->ARM_pc -= thumb_mode(regs) ? 2 : 4; -} - /* * OK, we're invoking a handler */ static int handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *oldset, - struct pt_regs * regs, int syscall) + struct pt_regs * regs) { struct thread_info *thread = current_thread_info(); struct task_struct *tsk = current; @@ -617,26 +611,6 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, int ret; /* - * If we were from a system call, check for system call restarting... - */ - if (syscall) { - switch (regs->ARM_r0) { - case -ERESTART_RESTARTBLOCK: - case -ERESTARTNOHAND: - regs->ARM_r0 = -EINTR; - break; - case -ERESTARTSYS: - if (!(ka->sa.sa_flags & SA_RESTART)) { - regs->ARM_r0 = -EINTR; - break; - } - /* fallthrough */ - case -ERESTARTNOINTR: - setup_syscall_restart(regs); - } - } - - /* * translate the signal */ if (usig < 32 && thread->exec_domain && thread->exec_domain->signal_invmap) @@ -685,6 +659,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, */ static void do_signal(struct pt_regs *regs, int syscall) { + unsigned int retval = 0, continue_addr = 0, restart_addr = 0; struct k_sigaction ka; siginfo_t info; int signr; @@ -698,18 +673,61 @@ static void do_signal(struct pt_regs *regs, int syscall) if (!user_mode(regs)) return; + /* + * If we were from a system call, check for system call restarting... + */ + if (syscall) { + continue_addr = regs->ARM_pc; + restart_addr = continue_addr - (thumb_mode(regs) ? 2 : 4); + retval = regs->ARM_r0; + + /* + * Prepare for system call restart. We do this here so that a + * debugger will see the already changed PSW. + */ + switch (retval) { + case -ERESTARTNOHAND: + case -ERESTARTSYS: + case -ERESTARTNOINTR: + regs->ARM_r0 = regs->ARM_ORIG_r0; + regs->ARM_pc = restart_addr; + break; + case -ERESTART_RESTARTBLOCK: + regs->ARM_r0 = -EINTR; + break; + } + } + if (try_to_freeze()) goto no_signal; + /* + * Get the signal to deliver. When running under ptrace, at this + * point the debugger may change all our registers ... + */ signr = get_signal_to_deliver(&info, &ka, regs, NULL); if (signr > 0) { sigset_t *oldset; + /* + * Depending on the signal settings we may need to revert the + * decision to restart the system call. But skip this if a + * debugger has chosen to restart at a different PC. + */ + if (regs->ARM_pc == restart_addr) { + if (retval == -ERESTARTNOHAND + || (retval == -ERESTARTSYS + && !(ka.sa.sa_flags & SA_RESTART))) { + regs->ARM_r0 = -EINTR; + regs->ARM_pc = continue_addr; + } + } + if (test_thread_flag(TIF_RESTORE_SIGMASK)) oldset = ¤t->saved_sigmask; else oldset = ¤t->blocked; - if (handle_signal(signr, &ka, &info, oldset, regs, syscall) == 0) { + if (handle_signal(signr, &ka, &info, oldset, regs) == 0) { /* * A signal was successfully delivered; the saved * sigmask will have been stored in the signal frame, @@ -723,11 +741,14 @@ static void do_signal(struct pt_regs *regs, int syscall) } no_signal: - /* - * No signal to deliver to the process - restart the syscall. - */ if (syscall) { - if (regs->ARM_r0 == -ERESTART_RESTARTBLOCK) { + /* + * Handle restarting a different system call. As above, + * if a debugger has chosen to restart at a different PC, + * ignore the restart. + */ + if (retval == -ERESTART_RESTARTBLOCK + && regs->ARM_pc == continue_addr) { if (thumb_mode(regs)) { regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE; regs->ARM_pc -= 2; @@ -750,11 +771,6 @@ static void do_signal(struct pt_regs *regs, int syscall) #endif } } - if (regs->ARM_r0 == -ERESTARTNOHAND || - regs->ARM_r0 == -ERESTARTSYS || - regs->ARM_r0 == -ERESTARTNOINTR) { - setup_syscall_restart(regs); - } /* If there's no signal to deliver, we just put the saved sigmask * back. diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 8fe05ad932e..f29b8a29b17 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -479,7 +479,7 @@ static void broadcast_timer_set_mode(enum clock_event_mode mode, { } -static void broadcast_timer_setup(struct clock_event_device *evt) +static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt) { evt->name = "dummy_timer"; evt->features = CLOCK_EVT_FEAT_ONESHOT | diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index 4ad8da15ef2..af0aaebf4de 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -311,7 +311,7 @@ asmlinkage long sys_oabi_semtimedop(int semid, long err; int i; - if (nsops < 1) + if (nsops < 1 || nsops > SEMOPM) return -EINVAL; sops = kmalloc(sizeof(*sops) * nsops, GFP_KERNEL); if (!sops) diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index f0000e188c8..3b54ad19d48 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -410,8 +410,7 @@ static int bad_syscall(int n, struct pt_regs *regs) struct thread_info *thread = current_thread_info(); siginfo_t info; - if (current->personality != PER_LINUX && - current->personality != PER_LINUX_32BIT && + if ((current->personality & PER_MASK) != PER_LINUX && thread->exec_domain->handler) { thread->exec_domain->handler(n, regs); return regs->ARM_r0; diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 19390231a0e..2d299bf5d72 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -83,6 +83,7 @@ config ARCH_AT91CAP9 select CPU_ARM926T select GENERIC_CLOCKEVENTS select HAVE_FB_ATMEL + select HAVE_NET_MACB config ARCH_AT572D940HF bool "AT572D940HF" diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c index 1f9d3cb64c5..d8df59a3426 100644 --- a/arch/arm/mach-at91/board-eb01.c +++ b/arch/arm/mach-at91/board-eb01.c @@ -30,6 +30,11 @@ #include <mach/board.h> #include "generic.h" +static void __init at91eb01_init_irq(void) +{ + at91x40_init_interrupts(NULL); +} + static void __init at91eb01_map_io(void) { at91x40_initialize(40000000); @@ -38,7 +43,7 @@ static void __init at91eb01_map_io(void) MACHINE_START(AT91EB01, "Atmel AT91 EB01") /* Maintainer: Greg Ungerer <gerg@snapgear.com> */ .timer = &at91x40_timer, - .init_irq = at91x40_init_interrupts, + .init_irq = at91eb01_init_irq, .map_io = at91eb01_map_io, MACHINE_END diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 3bef931d0b1..0700f212530 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -27,6 +27,7 @@ #define ARCH_ID_AT91SAM9G45 0x819b05a0 #define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */ #define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */ +#define ARCH_ID_AT91SAM9X5 0x819a05a0 #define ARCH_ID_AT91CAP9 0x039A03A0 #define ARCH_ID_AT91SAM9XE128 0x329973a0 @@ -55,6 +56,12 @@ static inline unsigned long at91_cpu_fully_identify(void) #define ARCH_EXID_AT91SAM9G46 0x00000003 #define ARCH_EXID_AT91SAM9G45 0x00000004 +#define ARCH_EXID_AT91SAM9G15 0x00000000 +#define ARCH_EXID_AT91SAM9G35 0x00000001 +#define ARCH_EXID_AT91SAM9X35 0x00000002 +#define ARCH_EXID_AT91SAM9G25 0x00000003 +#define ARCH_EXID_AT91SAM9X25 0x00000004 + static inline unsigned long at91_exid_identify(void) { return at91_sys_read(AT91_DBGU_EXID); @@ -143,6 +150,27 @@ static inline unsigned long at91cap9_rev_identify(void) #define cpu_is_at91sam9m11() (0) #endif +#ifdef CONFIG_ARCH_AT91SAM9X5 +#define cpu_is_at91sam9x5() (at91_cpu_identify() == ARCH_ID_AT91SAM9X5) +#define cpu_is_at91sam9g15() (cpu_is_at91sam9x5() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9G15)) +#define cpu_is_at91sam9g35() (cpu_is_at91sam9x5() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9G35)) +#define cpu_is_at91sam9x35() (cpu_is_at91sam9x5() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9X35)) +#define cpu_is_at91sam9g25() (cpu_is_at91sam9x5() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9G25)) +#define cpu_is_at91sam9x25() (cpu_is_at91sam9x5() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9X25)) +#else +#define cpu_is_at91sam9x5() (0) +#define cpu_is_at91sam9g15() (0) +#define cpu_is_at91sam9g35() (0) +#define cpu_is_at91sam9x35() (0) +#define cpu_is_at91sam9g25() (0) +#define cpu_is_at91sam9x25() (0) +#endif + #ifdef CONFIG_ARCH_AT91CAP9 #define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9) #define cpu_is_at91cap9_revB() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_B) diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 32f147998cd..c0deacae778 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -63,6 +63,7 @@ config MACH_DAVINCI_EVM depends on ARCH_DAVINCI_DM644x select MISC_DEVICES select EEPROM_AT24 + select I2C help Configure this option to specify the whether the board used for development is a DM644x EVM @@ -72,6 +73,7 @@ config MACH_SFFSDR depends on ARCH_DAVINCI_DM644x select MISC_DEVICES select EEPROM_AT24 + select I2C help Say Y here to select the Lyrtech Small Form Factor Software Defined Radio (SFFSDR) board. @@ -105,6 +107,7 @@ config MACH_DAVINCI_DM6467_EVM select MACH_DAVINCI_DM6467TEVM select MISC_DEVICES select EEPROM_AT24 + select I2C help Configure this option to specify the whether the board used for development is a DM6467 EVM @@ -118,6 +121,7 @@ config MACH_DAVINCI_DM365_EVM depends on ARCH_DAVINCI_DM365 select MISC_DEVICES select EEPROM_AT24 + select I2C help Configure this option to specify whether the board used for development is a DM365 EVM @@ -129,6 +133,7 @@ config MACH_DAVINCI_DA830_EVM select GPIO_PCF857X select MISC_DEVICES select EEPROM_AT24 + select I2C help Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. @@ -205,6 +210,7 @@ config MACH_MITYOMAPL138 depends on ARCH_DAVINCI_DA850 select MISC_DEVICES select EEPROM_AT24 + select I2C help Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 System on Module. Information on this SoM may be found at diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index 2aa79c54f98..606a6f27ed6 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -29,7 +29,7 @@ #include <mach/mux.h> #include <mach/spi.h> -#define MITYOMAPL138_PHY_ID "0:03" +#define MITYOMAPL138_PHY_ID "" #define FACTORY_CONFIG_MAGIC 0x012C0138 #define FACTORY_CONFIG_VERSION 0x00010001 @@ -414,7 +414,7 @@ static struct resource mityomapl138_nandflash_resource[] = { static struct platform_device mityomapl138_nandflash_device = { .name = "davinci_nand", - .id = 0, + .id = 1, .dev = { .platform_data = &mityomapl138_nandflash_data, }, diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c index 0a95be1512b..41669ecc1f9 100644 --- a/arch/arm/mach-davinci/cpufreq.c +++ b/arch/arm/mach-davinci/cpufreq.c @@ -94,9 +94,7 @@ static int davinci_target(struct cpufreq_policy *policy, if (freqs.old == freqs.new) return ret; - cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, - dev_driver_string(cpufreq.dev), - "transition: %u --> %u\n", freqs.old, freqs.new); + dev_dbg(&cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new); ret = cpufreq_frequency_table_target(policy, pdata->freq_table, freqs.new, relation, &idx); diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 625d4b66718..58a02dc7b15 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -39,7 +39,8 @@ #define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_I2C1_BASE 0x01e28000 #define DA8XX_SPI0_BASE 0x01c41000 -#define DA8XX_SPI1_BASE 0x01f0e000 +#define DA830_SPI1_BASE 0x01e12000 +#define DA850_SPI1_BASE 0x01f0e000 #define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000 #define DA8XX_EMAC_MOD_REG_OFFSET 0x2000 @@ -762,8 +763,8 @@ static struct resource da8xx_spi0_resources[] = { static struct resource da8xx_spi1_resources[] = { [0] = { - .start = DA8XX_SPI1_BASE, - .end = DA8XX_SPI1_BASE + SZ_4K - 1, + .start = DA830_SPI1_BASE, + .end = DA830_SPI1_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -832,5 +833,10 @@ int __init da8xx_register_spi(int instance, struct spi_board_info *info, da8xx_spi_pdata[instance].num_chipselect = len; + if (instance == 1 && cpu_is_davinci_da850()) { + da8xx_spi1_resources[0].start = DA850_SPI1_BASE; + da8xx_spi1_resources[0].end = DA850_SPI1_BASE + SZ_4K - 1; + } + return platform_device_register(&da8xx_spi_device[instance]); } diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index f6801223964..a3a94e9c937 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -314,7 +314,7 @@ static struct clk timer2_clk = { .name = "timer2", .parent = &pll1_aux_clk, .lpsc = DAVINCI_LPSC_TIMER2, - .usecount = 1, /* REVISIT: why can't' this be disabled? */ + .usecount = 1, /* REVISIT: why can't this be disabled? */ }; static struct clk timer3_clk = { diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 5f8a6542418..4c82c271629 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -274,7 +274,7 @@ static struct clk timer2_clk = { .name = "timer2", .parent = &pll1_aux_clk, .lpsc = DAVINCI_LPSC_TIMER2, - .usecount = 1, /* REVISIT: why can't' this be disabled? */ + .usecount = 1, /* REVISIT: why can't this be disabled? */ }; static struct clk_lookup dm644x_clks[] = { diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index 9f1befc5ac3..f8b7ea4f623 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -24,6 +24,9 @@ #define UART_SHIFT 2 +#define davinci_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET) +#define davinci_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET) + .pushsection .data davinci_uart_phys: .word 0 davinci_uart_virt: .word 0 @@ -34,7 +37,7 @@ davinci_uart_virt: .word 0 /* Use davinci_uart_phys/virt if already configured */ 10: mrc p15, 0, \rp, c1, c0 tst \rp, #1 @ MMU enabled? - ldreq \rp, =__virt_to_phys(davinci_uart_phys) + ldreq \rp, =davinci_uart_v2p(davinci_uart_phys) ldrne \rp, =davinci_uart_phys add \rv, \rp, #4 @ davinci_uart_virt ldr \rp, [\rp, #0] @@ -48,18 +51,18 @@ davinci_uart_virt: .word 0 tst \rp, #1 @ MMU enabled? /* Copy uart phys address from decompressor uart info */ - ldreq \rv, =__virt_to_phys(davinci_uart_phys) + ldreq \rv, =davinci_uart_v2p(davinci_uart_phys) ldrne \rv, =davinci_uart_phys ldreq \rp, =DAVINCI_UART_INFO - ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO) + ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO) ldr \rp, [\rp, #0] str \rp, [\rv] /* Copy uart virt address from decompressor uart info */ - ldreq \rv, =__virt_to_phys(davinci_uart_virt) + ldreq \rv, =davinci_uart_v2p(davinci_uart_virt) ldrne \rv, =davinci_uart_virt ldreq \rp, =DAVINCI_UART_INFO - ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO) + ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO) ldr \rp, [\rp, #4] str \rp, [\rv] diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index 8051110b8ac..c9e6ce185a6 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -22,7 +22,7 @@ * * This area sits just below the page tables (see arch/arm/kernel/head.S). */ -#define DAVINCI_UART_INFO (PHYS_OFFSET + 0x3ff8) +#define DAVINCI_UART_INFO (PLAT_PHYS_OFFSET + 0x3ff8) #define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h index ee8b02ed801..7bfb827f3fe 100644 --- a/arch/arm/mach-mmp/include/mach/gpio.h +++ b/arch/arm/mach-mmp/include/mach/gpio.h @@ -10,7 +10,7 @@ #define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) #define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x)))) -#define NR_BUILTIN_GPIO (192) +#define NR_BUILTIN_GPIO IRQ_GPIO_NUM #define gpio_to_bank(gpio) ((gpio) >> 5) #define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio)) diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h index 4621067c772..713be155a44 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h @@ -8,6 +8,15 @@ #define MFP_DRIVE_MEDIUM (0x2 << 13) #define MFP_DRIVE_FAST (0x3 << 13) +#undef MFP_CFG +#undef MFP_CFG_DRV + +#define MFP_CFG(pin, af) \ + (MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM) + +#define MFP_CFG_DRV(pin, af, drv) \ + (MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv) + /* GPIO */ #define GPIO0_GPIO MFP_CFG(GPIO0, AF5) #define GPIO1_GPIO MFP_CFG(GPIO1, AF5) diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 7f568611547..6a96911b0ad 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -160,10 +160,7 @@ static struct msm_mmc_platform_data qsd8x50_sdc1_data = { static void __init qsd8x50_init_mmc(void) { - if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa()) - vreg_mmc = vreg_get(NULL, "gp6"); - else - vreg_mmc = vreg_get(NULL, "gp5"); + vreg_mmc = vreg_get(NULL, "gp5"); if (IS_ERR(vreg_mmc)) { pr_err("vreg get for vreg_mmc failed (%ld)\n", diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 56f920c55b6..38b95e949d1 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -269,7 +269,7 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt) /* Use existing clock_event for cpu 0 */ if (!smp_processor_id()) - return; + return 0; writel(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL); diff --git a/arch/arm/mach-mx3/mach-vpr200.c b/arch/arm/mach-mx3/mach-vpr200.c index 2cf390fbd98..47a69cbc31a 100644 --- a/arch/arm/mach-mx3/mach-vpr200.c +++ b/arch/arm/mach-mx3/mach-vpr200.c @@ -257,11 +257,16 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .workaround = FLS_USB2_WORKAROUND_ENGCM09152, }; +static int vpr200_usbh_init(struct platform_device *pdev) +{ + return mx35_initialize_usb_hw(pdev->id, + MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY); +} + /* USB HOST config */ static const struct mxc_usbh_platform_data usb_host_pdata __initconst = { - .portsc = MXC_EHCI_MODE_SERIAL, - .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | - MXC_EHCI_INTERNAL_PHY, + .init = vpr200_usbh_init, + .portsc = MXC_EHCI_MODE_SERIAL, }; static struct platform_device *devices[] __initdata = { diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 10a1bea1054..6206b1191fe 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -193,7 +193,7 @@ static iomux_v3_cfg_t mx53_loco_pads[] = { .wakeup = wake, \ } -static const struct gpio_keys_button loco_buttons[] __initconst = { +static struct gpio_keys_button loco_buttons[] = { GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0), GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0), GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0), diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 1ad97fed1e9..5dcc59d5b9e 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -295,11 +295,11 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ unsigned long diff, parent_rate, calc_rate; \ int i; \ \ - parent_rate = clk_get_rate(clk->parent); \ div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \ bm_busy = BM_CLKCTRL_##dr##_BUSY; \ \ if (clk->parent == &ref_xtal_clk) { \ + parent_rate = clk_get_rate(clk->parent); \ div = DIV_ROUND_UP(parent_rate, rate); \ if (clk == &cpu_clk) { \ div_max = BM_CLKCTRL_CPU_DIV_XTAL >> \ @@ -309,6 +309,11 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ if (div == 0 || div > div_max) \ return -EINVAL; \ } else { \ + /* \ + * hack alert: this block modifies clk->parent, too, \ + * so the base to use it the grand parent. \ + */ \ + parent_rate = clk_get_rate(clk->parent->parent); \ rate >>= PARENT_RATE_SHIFT; \ parent_rate >>= PARENT_RATE_SHIFT; \ diff = parent_rate; \ diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index a45cd640968..512b1520445 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -68,7 +68,7 @@ obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o AFLAGS_sleep24xx.o :=-Wa,-march=armv6 -AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a +AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec) ifeq ($(CONFIG_PM_VERBOSE),y) CFLAGS_pm_bus.o += -DDEBUG diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index e964895b80e..f8ba20a14e6 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -141,14 +141,19 @@ static void __init rx51_init(void) static void __init rx51_map_io(void) { omap2_set_globals_3xxx(); - rx51_video_mem_init(); omap34xx_map_common_io(); } +static void __init rx51_reserve(void) +{ + rx51_video_mem_init(); + omap_reserve(); +} + MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") /* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */ .boot_params = 0x80000100, - .reserve = omap_reserve, + .reserve = rx51_reserve, .map_io = rx51_map_io, .init_early = rx51_init_early, .init_irq = omap_init_irq, diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c index b2b1e37bb6b..d6e34dd9e7e 100644 --- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c +++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c @@ -115,6 +115,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, 0, 0, 0, 0); + clk->rate = rate; return 0; } diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 276992d3b7f..8c965671b4d 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3116,14 +3116,9 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "dsp_fck", &dsp_fck, CK_443X), CLK("omapdss_dss", "sys_clk", &dss_sys_clk, CK_443X), CLK("omapdss_dss", "tv_clk", &dss_tv_clk, CK_443X), - CLK("omapdss_dss", "dss_clk", &dss_dss_clk, CK_443X), CLK("omapdss_dss", "video_clk", &dss_48mhz_clk, CK_443X), - CLK("omapdss_dss", "fck", &dss_fck, CK_443X), - /* - * On OMAP4, DSS ick is a dummy clock; this is needed for compatibility - * with OMAP2/3. - */ - CLK("omapdss_dss", "ick", &dummy_ck, CK_443X), + CLK("omapdss_dss", "fck", &dss_dss_clk, CK_443X), + CLK("omapdss_dss", "ick", &dss_fck, CK_443X), CLK(NULL, "efuse_ctrl_cust_fck", &efuse_ctrl_cust_fck, CK_443X), CLK(NULL, "emif1_fck", &emif1_fck, CK_443X), CLK(NULL, "emif2_fck", &emif2_fck, CK_443X), diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c index 9d0dec806e9..38830d8d478 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c @@ -247,6 +247,7 @@ struct omap3_cm_regs { u32 per_cm_clksel; u32 emu_cm_clksel; u32 emu_cm_clkstctrl; + u32 pll_cm_autoidle; u32 pll_cm_autoidle2; u32 pll_cm_clksel4; u32 pll_cm_clksel5; @@ -319,6 +320,15 @@ void omap3_cm_save_context(void) omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1); cm_context.emu_cm_clkstctrl = omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL); + /* + * As per erratum i671, ROM code does not respect the PER DPLL + * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1. + * In this case, even though this register has been saved in + * scratchpad contents, we need to restore AUTO_PERIPH_DPLL + * by ourselves. So, we need to save it anyway. + */ + cm_context.pll_cm_autoidle = + omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); cm_context.pll_cm_autoidle2 = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2); cm_context.pll_cm_clksel4 = @@ -441,6 +451,13 @@ void omap3_cm_restore_context(void) CM_CLKSEL1); omap2_cm_write_mod_reg(cm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL); + /* + * As per erratum i671, ROM code does not respect the PER DPLL + * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1. + * In this case, we need to restore AUTO_PERIPH_DPLL by ourselves. + */ + omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle, PLL_MOD, + CM_AUTOIDLE); omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle2, PLL_MOD, CM_AUTOIDLE2); omap2_cm_write_mod_reg(cm_context.pll_cm_clksel4, PLL_MOD, diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 69527941902..da53ba3917c 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -316,8 +316,14 @@ void omap3_save_scratchpad_contents(void) omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL); prcm_block_contents.cm_clken_pll = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); + /* + * As per erratum i671, ROM code does not respect the PER DPLL + * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1. + * Then, in anycase, clear these bits to avoid extra latencies. + */ prcm_block_contents.cm_autoidle_pll = - omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL); + omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) & + ~OMAP3430_AUTO_PERIPH_DPLL_MASK; prcm_block_contents.cm_clksel1_pll = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL); prcm_block_contents.cm_clksel2_pll = diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 8eb3ce1bbfb..c4d0ae87d62 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -1639,6 +1639,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = { static struct omap_hwmod omap2420_gpio1_hwmod = { .name = "gpio1", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio1_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio1_irqs), .main_clk = "gpios_fck", @@ -1669,6 +1670,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = { static struct omap_hwmod omap2420_gpio2_hwmod = { .name = "gpio2", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio2_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio2_irqs), .main_clk = "gpios_fck", @@ -1699,6 +1701,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = { static struct omap_hwmod omap2420_gpio3_hwmod = { .name = "gpio3", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio3_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio3_irqs), .main_clk = "gpios_fck", @@ -1729,6 +1732,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = { static struct omap_hwmod omap2420_gpio4_hwmod = { .name = "gpio4", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio4_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio4_irqs), .main_clk = "gpios_fck", @@ -1782,7 +1786,7 @@ static struct omap_hwmod_irq_info omap2420_dma_system_irqs[] = { static struct omap_hwmod_addr_space omap2420_dma_system_addrs[] = { { .pa_start = 0x48056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x48056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index e6e3810db77..9682dd519f8 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1742,6 +1742,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = { static struct omap_hwmod omap2430_gpio1_hwmod = { .name = "gpio1", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio1_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio1_irqs), .main_clk = "gpios_fck", @@ -1772,6 +1773,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = { static struct omap_hwmod omap2430_gpio2_hwmod = { .name = "gpio2", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio2_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio2_irqs), .main_clk = "gpios_fck", @@ -1802,6 +1804,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = { static struct omap_hwmod omap2430_gpio3_hwmod = { .name = "gpio3", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio3_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio3_irqs), .main_clk = "gpios_fck", @@ -1832,6 +1835,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = { static struct omap_hwmod omap2430_gpio4_hwmod = { .name = "gpio4", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio4_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio4_irqs), .main_clk = "gpios_fck", @@ -1862,6 +1866,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = { static struct omap_hwmod omap2430_gpio5_hwmod = { .name = "gpio5", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio5_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio5_irqs), .main_clk = "gpio5_fck", @@ -1915,7 +1920,7 @@ static struct omap_hwmod_irq_info omap2430_dma_system_irqs[] = { static struct omap_hwmod_addr_space omap2430_dma_system_addrs[] = { { .pa_start = 0x48056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x48056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index b98e2dfcba2..909a84de668 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -2141,6 +2141,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = { static struct omap_hwmod omap3xxx_gpio1_hwmod = { .name = "gpio1", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio1_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio1_irqs), .main_clk = "gpio1_ick", @@ -2177,6 +2178,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = { static struct omap_hwmod omap3xxx_gpio2_hwmod = { .name = "gpio2", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio2_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio2_irqs), .main_clk = "gpio2_ick", @@ -2213,6 +2215,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = { static struct omap_hwmod omap3xxx_gpio3_hwmod = { .name = "gpio3", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio3_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio3_irqs), .main_clk = "gpio3_ick", @@ -2249,6 +2252,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = { static struct omap_hwmod omap3xxx_gpio4_hwmod = { .name = "gpio4", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio4_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio4_irqs), .main_clk = "gpio4_ick", @@ -2285,6 +2289,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = { static struct omap_hwmod omap3xxx_gpio5_hwmod = { .name = "gpio5", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio5_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio5_irqs), .main_clk = "gpio5_ick", @@ -2321,6 +2326,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = { static struct omap_hwmod omap3xxx_gpio6_hwmod = { .name = "gpio6", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio6_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio6_irqs), .main_clk = "gpio6_ick", @@ -2386,7 +2392,7 @@ static struct omap_hwmod_irq_info omap3xxx_dma_system_irqs[] = { static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = { { .pa_start = 0x48056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x48056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 3e88dd3f8ef..abc548a0c98 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -885,7 +885,7 @@ static struct omap_hwmod_ocp_if *omap44xx_dma_system_masters[] = { static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = { { .pa_start = 0x4a056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x4a056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c index 5f2da7565b6..4321e793892 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.c +++ b/arch/arm/mach-omap2/omap_l3_smx.c @@ -196,11 +196,11 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) /* No timeout error for debug sources */ } - base = ((l3->rt) + (*(omap3_l3_bases[int_type] + err_source))); - /* identify the error source */ for (err_source = 0; !(status & (1 << err_source)); err_source++) ; + + base = l3->rt + *(omap3_l3_bases[int_type] + err_source); error = omap3_l3_readll(base, L3_ERROR_LOG); if (error) { diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 30af3351c2d..49486f522dc 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -89,6 +89,7 @@ static void omap2_init_processor_devices(void) if (cpu_is_omap44xx()) { _init_omap_device("l3_main_1", &l3_dev); _init_omap_device("dsp", &dsp_dev); + _init_omap_device("iva", &iva_dev); } else { _init_omap_device("l3_main", &l3_dev); } diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 6fb520999b6..0c1552d9d99 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -114,7 +114,6 @@ static int __init _config_common_vdd_data(struct omap_vdd_info *vdd) sys_clk_speed /= 1000; /* Generic voltage parameters */ - vdd->curr_volt = 1200000; vdd->volt_scale = vp_forceupdate_scale_voltage; vdd->vp_enabled = false; diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 6de0ad0eea6..9cdcca59792 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -711,7 +711,7 @@ static struct regulator_consumer_supply bq24022_consumers[] = { static struct regulator_init_data bq24022_init_data = { .constraints = { .max_uA = 500000, - .valid_ops_mask = REGULATOR_CHANGE_CURRENT, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT|REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers), .consumer_supplies = bq24022_consumers, diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h index b024a8b3743..c4639502efc 100644 --- a/arch/arm/mach-pxa/include/mach/gpio.h +++ b/arch/arm/mach-pxa/include/mach/gpio.h @@ -99,11 +99,24 @@ #define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2)) -#define NR_BUILTIN_GPIO 128 +#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM #define gpio_to_bank(gpio) ((gpio) >> 5) #define gpio_to_irq(gpio) IRQ_GPIO(gpio) -#define irq_to_gpio(irq) IRQ_TO_GPIO(irq) + +static inline int irq_to_gpio(unsigned int irq) +{ + int gpio; + + if (irq == IRQ_GPIO0 || irq == IRQ_GPIO1) + return irq - IRQ_GPIO0; + + gpio = irq - PXA_GPIO_IRQ_BASE; + if (gpio >= 2 && gpio < NR_BUILTIN_GPIO) + return gpio; + + return -1; +} #ifdef CONFIG_CPU_PXA26x /* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted, diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index a4285fc0087..038402404e3 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -93,9 +93,6 @@ #define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x)) #define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x)) -#define IRQ_TO_GPIO_2_x(i) ((i) - PXA_GPIO_IRQ_BASE) -#define IRQ_TO_GPIO(i) (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i)) - /* * The following interrupts are for board specific purposes. Since * the kernel can only run on one machine at a time, we can re-use diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index a72993dde2b..9984ef70bd7 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -599,7 +599,7 @@ static struct regulator_consumer_supply bq24022_consumers[] = { static struct regulator_init_data bq24022_init_data = { .constraints = { .max_uA = 500000, - .valid_ops_mask = REGULATOR_CHANGE_CURRENT, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers), .consumer_supplies = bq24022_consumers, diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 6bde5956358..a4af8c52d7e 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -285,7 +285,7 @@ static inline void pxa25x_init_pm(void) {} static int pxa25x_set_wake(struct irq_data *d, unsigned int on) { - int gpio = IRQ_TO_GPIO(d->irq); + int gpio = irq_to_gpio(d->irq); uint32_t mask = 0; if (gpio >= 0 && gpio < 85) diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 1cb5d0f9723..909756eaf4b 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -345,7 +345,7 @@ static inline void pxa27x_init_pm(void) {} */ static int pxa27x_set_wake(struct irq_data *d, unsigned int on) { - int gpio = IRQ_TO_GPIO(d->irq); + int gpio = irq_to_gpio(d->irq); uint32_t mask; if (gpio >= 0 && gpio < 128) diff --git a/arch/arm/mach-realview/include/mach/barriers.h b/arch/arm/mach-realview/include/mach/barriers.h index 0c5d749d7b5..9a732195aa1 100644 --- a/arch/arm/mach-realview/include/mach/barriers.h +++ b/arch/arm/mach-realview/include/mach/barriers.h @@ -4,5 +4,5 @@ * operation to deadlock the system. */ #define mb() dsb() -#define rmb() dmb() +#define rmb() dsb() #define wmb() mb() diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 0db2411ef4b..716662008ce 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -409,6 +409,10 @@ struct platform_device s3c24xx_pwm_device = { .num_resources = 0, }; +static struct platform_device gta02_dfbmcs320_device = { + .name = "dfbmcs320", +}; + static struct i2c_board_info gta02_i2c_devs[] __initdata = { { I2C_BOARD_INFO("pcf50633", 0x73), @@ -523,6 +527,7 @@ static struct platform_device *gta02_devices[] __initdata = { &s3c_device_iis, &samsung_asoc_dma, &s3c_device_i2c0, + >a02_dfbmcs320_device, >a02_buttons_device, &s3c_device_adc, &s3c_device_ts, diff --git a/arch/arm/mach-tegra/gpio.c b/arch/arm/mach-tegra/gpio.c index 76a3f654220..65a1aba6823 100644 --- a/arch/arm/mach-tegra/gpio.c +++ b/arch/arm/mach-tegra/gpio.c @@ -257,7 +257,8 @@ static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) void tegra_gpio_resume(void) { unsigned long flags; - int b, p, i; + int b; + int p; local_irq_save(flags); @@ -280,7 +281,8 @@ void tegra_gpio_resume(void) void tegra_gpio_suspend(void) { unsigned long flags; - int b, p, i; + int b; + int p; local_irq_save(flags); for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) { diff --git a/arch/arm/mach-tegra/include/mach/barriers.h b/arch/arm/mach-tegra/include/mach/barriers.h index cc115174899..425b42e91ef 100644 --- a/arch/arm/mach-tegra/include/mach/barriers.h +++ b/arch/arm/mach-tegra/include/mach/barriers.h @@ -23,7 +23,7 @@ #include <asm/outercache.h> -#define rmb() dmb() +#define rmb() dsb() #define wmb() do { dsb(); outer_sync(); } while (0) #define mb() wmb() diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index 6d7c4eea4dc..4459470c052 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -1362,14 +1362,15 @@ static int tegra_clk_shared_bus_set_rate(struct clk *c, unsigned long rate) { unsigned long flags; int ret; + long new_rate = rate; - rate = clk_round_rate(c->parent, rate); - if (rate < 0) - return rate; + new_rate = clk_round_rate(c->parent, new_rate); + if (new_rate < 0) + return new_rate; spin_lock_irqsave(&c->parent->spinlock, flags); - c->u.shared_bus_user.rate = rate; + c->u.shared_bus_user.rate = new_rate; ret = tegra_clk_shared_bus_update(c->parent); spin_unlock_irqrestore(&c->parent->spinlock, flags); diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index af913741e6e..6e1907fa94f 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -178,16 +178,15 @@ static struct i2c_board_info __initdata mop500_i2c0_devices[] = { .irq = NOMADIK_GPIO_TO_IRQ(217), .platform_data = &mop500_tc35892_data, }, -}; - -/* I2C0 devices only available prior to HREFv60 */ -static struct i2c_board_info __initdata mop500_i2c0_old_devices[] = { + /* I2C0 devices only available prior to HREFv60 */ { I2C_BOARD_INFO("tps61052", 0x33), .platform_data = &mop500_tps61052_data, }, }; +#define NUM_PRE_V60_I2C0_DEVICES 1 + static struct i2c_board_info __initdata mop500_i2c2_devices[] = { { /* lp5521 LED driver, 1st device */ @@ -425,6 +424,8 @@ static void __init mop500_uart_init(void) static void __init mop500_init_machine(void) { + int i2c0_devs; + /* * The HREFv60 board removed a GPIO expander and routed * all these GPIO pins to the internal GPIO controller @@ -448,11 +449,11 @@ static void __init mop500_init_machine(void) platform_device_register(&ab8500_device); - i2c_register_board_info(0, mop500_i2c0_devices, - ARRAY_SIZE(mop500_i2c0_devices)); - if (!machine_is_hrefv60()) - i2c_register_board_info(0, mop500_i2c0_old_devices, - ARRAY_SIZE(mop500_i2c0_old_devices)); + i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); + if (machine_is_hrefv60()) + i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; + + i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, ARRAY_SIZE(mop500_i2c2_devices)); } diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index e5f6fc42834..e591513bb53 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -392,7 +392,7 @@ free_memmap(unsigned long start_pfn, unsigned long end_pfn) * Convert start_pfn/end_pfn to a struct page pointer. */ start_pg = pfn_to_page(start_pfn - 1) + 1; - end_pg = pfn_to_page(end_pfn); + end_pg = pfn_to_page(end_pfn - 1) + 1; /* * Convert to physical addresses, and @@ -426,6 +426,14 @@ static void __init free_unused_memmap(struct meminfo *mi) bank_start = bank_pfn_start(bank); +#ifdef CONFIG_SPARSEMEM + /* + * Take care not to free memmap entries that don't exist + * due to SPARSEMEM sections which aren't present. + */ + bank_start = min(bank_start, + ALIGN(prev_bank_end, PAGES_PER_SECTION)); +#endif /* * If we had a previous bank, and there is a space * between the current bank and the previous, free it. @@ -440,6 +448,12 @@ static void __init free_unused_memmap(struct meminfo *mi) */ prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES); } + +#ifdef CONFIG_SPARSEMEM + if (!IS_ALIGNED(prev_bank_end, PAGES_PER_SECTION)) + free_memmap(prev_bank_end, + ALIGN(prev_bank_end, PAGES_PER_SECTION)); +#endif } static void __init free_highpages(void) diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index afe209e1e1f..74be05f3e03 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -7,6 +7,7 @@ #include <linux/shm.h> #include <linux/sched.h> #include <linux/io.h> +#include <linux/personality.h> #include <linux/random.h> #include <asm/cputype.h> #include <asm/system.h> @@ -82,7 +83,8 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, mm->cached_hole_size = 0; } /* 8 bits of randomness in 20 address space bits */ - if (current->flags & PF_RANDOMIZE) + if ((current->flags & PF_RANDOMIZE) && + !(current->personality & ADDR_NO_RANDOMIZE)) addr += (get_random_int() % (1 << 8)) << PAGE_SHIFT; full_search: diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index b46eb21f05c..bf8a1d1cccb 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -390,7 +390,7 @@ ENTRY(cpu_arm920_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm920_suspend_size .equ cpu_arm920_suspend_size, 4 * 3 -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP ENTRY(cpu_arm920_do_suspend) stmfd sp!, {r4 - r7, lr} mrc p15, 0, r4, c13, c0, 0 @ PID diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 6a4bdb2c94a..0ed85d930c0 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -404,7 +404,7 @@ ENTRY(cpu_arm926_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm926_suspend_size .equ cpu_arm926_suspend_size, 4 * 3 -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP ENTRY(cpu_arm926_do_suspend) stmfd sp!, {r4 - r7, lr} mrc p15, 0, r4, c13, c0, 0 @ PID diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 74483d1977f..184a9c997e3 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -171,7 +171,7 @@ ENTRY(cpu_sa1100_set_pte_ext) .globl cpu_sa1100_suspend_size .equ cpu_sa1100_suspend_size, 4*4 -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP ENTRY(cpu_sa1100_do_suspend) stmfd sp!, {r4 - r7, lr} mrc p15, 0, r4, c3, c0, 0 @ domain ID diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index bfa0c9f611c..7c99cb4c8e4 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -124,7 +124,7 @@ ENTRY(cpu_v6_set_pte_ext) /* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */ .globl cpu_v6_suspend_size .equ cpu_v6_suspend_size, 4 * 8 -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP ENTRY(cpu_v6_do_suspend) stmfd sp!, {r4 - r11, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index c35618e42f6..babfba09c89 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -211,7 +211,7 @@ cpu_v7_name: /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */ .globl cpu_v7_suspend_size .equ cpu_v7_suspend_size, 4 * 8 -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP ENTRY(cpu_v7_do_suspend) stmfd sp!, {r4 - r11, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 63d8b2044e8..596213699f3 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -417,7 +417,7 @@ ENTRY(cpu_xsc3_set_pte_ext) .globl cpu_xsc3_suspend_size .equ cpu_xsc3_suspend_size, 4 * 8 -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP ENTRY(cpu_xsc3_do_suspend) stmfd sp!, {r4 - r10, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 086038cd86a..42af97664c9 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -395,7 +395,7 @@ ENTRY(xscale_dma_a0_map_area) teq r2, #DMA_TO_DEVICE beq xscale_dma_clean_range b xscale_dma_flush_range -ENDPROC(xscsale_dma_a0_map_area) +ENDPROC(xscale_dma_a0_map_area) /* * dma_unmap_area(start, size, dir) @@ -518,7 +518,7 @@ ENTRY(cpu_xscale_set_pte_ext) .globl cpu_xscale_suspend_size .equ cpu_xscale_suspend_size, 4 * 7 -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP ENTRY(cpu_xscale_do_suspend) stmfd sp!, {r4 - r10, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index 7a107246fd9..6cd6d7f686f 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -295,6 +295,12 @@ static int mxc_gpio_direction_output(struct gpio_chip *chip, return 0; } +/* + * This lock class tells lockdep that GPIO irqs are in a different + * category than their parents, so it won't report false recursion. + */ +static struct lock_class_key gpio_lock_class; + int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) { int i, j; @@ -311,6 +317,7 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) __raw_writel(~0, port[i].base + GPIO_ISR); for (j = port[i].virtual_irq_start; j < port[i].virtual_irq_start + 32; j++) { + irq_set_lockdep_class(j, &gpio_lock_class); irq_set_chip_and_handler(j, &gpio_irq_chip, handle_level_irq); set_irq_flags(j, IRQF_VALID); diff --git a/arch/arm/plat-mxc/ssi-fiq.S b/arch/arm/plat-mxc/ssi-fiq.S index 4ddce565b35..8397a2dd19f 100644 --- a/arch/arm/plat-mxc/ssi-fiq.S +++ b/arch/arm/plat-mxc/ssi-fiq.S @@ -124,6 +124,8 @@ imx_ssi_fiq_start: 1: @ return from FIQ subs pc, lr, #4 + + .align imx_ssi_fiq_base: .word 0x0 imx_ssi_fiq_rx_buffer: diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index 8a51fd58f65..34fc31ee908 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -793,6 +793,8 @@ static irqreturn_t iommu_fault_handler(int irq, void *data) clk_enable(obj->clk); errs = iommu_report_fault(obj, &da); clk_disable(obj->clk); + if (errs == 0) + return IRQ_HANDLED; /* Fault callback or TLB/PTE Dynamic loading */ if (obj->isr && !obj->isr(obj, da, errs, obj->isr_priv)) diff --git a/arch/arm/plat-s5p/pm.c b/arch/arm/plat-s5p/pm.c index d592b6304b4..d15dc47b0e3 100644 --- a/arch/arm/plat-s5p/pm.c +++ b/arch/arm/plat-s5p/pm.c @@ -19,17 +19,6 @@ #define PFX "s5p pm: " -/* s3c_pm_check_resume_pin - * - * check to see if the pin is configured correctly for sleep mode, and - * make any necessary adjustments if it is not -*/ - -static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) -{ - /* nothing here yet */ -} - /* s3c_pm_configure_extint * * configure all external interrupt pins diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c index e4baf76f374..6b733fafe7c 100644 --- a/arch/arm/plat-samsung/pm-check.c +++ b/arch/arm/plat-samsung/pm-check.c @@ -164,7 +164,6 @@ static inline int in_region(void *ptr, int size, void *what, size_t whatsz) */ static u32 *s3c_pm_runcheck(struct resource *res, u32 *val) { - void *save_at = phys_to_virt(s3c_sleep_save_phys); unsigned long addr; unsigned long left; void *stkpage; @@ -192,11 +191,6 @@ static u32 *s3c_pm_runcheck(struct resource *res, u32 *val) goto skip_check; } - if (in_region(ptr, left, save_at, 32*4 )) { - S3C_PMDBG("skipping %08lx, has save block in\n", addr); - goto skip_check; - } - /* calculate and check the checksum */ calc = crc32_le(~0, ptr, left); diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index d5b58d31903..5c0a440d6e1 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -214,8 +214,9 @@ void s3c_pm_do_restore_core(struct sleep_save *ptr, int count) * * print any IRQs asserted at resume time (ie, we woke from) */ -static void s3c_pm_show_resume_irqs(int start, unsigned long which, - unsigned long mask) +static void __maybe_unused s3c_pm_show_resume_irqs(int start, + unsigned long which, + unsigned long mask) { int i; diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index bbf3da012af..f74695075e6 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -78,6 +78,14 @@ static void vfp_thread_exit(struct thread_info *thread) put_cpu(); } +static void vfp_thread_copy(struct thread_info *thread) +{ + struct thread_info *parent = current_thread_info(); + + vfp_sync_hwstate(parent); + thread->vfpstate = parent->vfpstate; +} + /* * When this function is called with the following 'cmd's, the following * is true while this function is being run: @@ -104,12 +112,17 @@ static void vfp_thread_exit(struct thread_info *thread) static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) { struct thread_info *thread = v; + u32 fpexc; +#ifdef CONFIG_SMP + unsigned int cpu; +#endif - if (likely(cmd == THREAD_NOTIFY_SWITCH)) { - u32 fpexc = fmrx(FPEXC); + switch (cmd) { + case THREAD_NOTIFY_SWITCH: + fpexc = fmrx(FPEXC); #ifdef CONFIG_SMP - unsigned int cpu = thread->cpu; + cpu = thread->cpu; /* * On SMP, if VFP is enabled, save the old state in @@ -134,13 +147,20 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) * old state. */ fmxr(FPEXC, fpexc & ~FPEXC_EN); - return NOTIFY_DONE; - } + break; - if (cmd == THREAD_NOTIFY_FLUSH) + case THREAD_NOTIFY_FLUSH: vfp_thread_flush(thread); - else + break; + + case THREAD_NOTIFY_EXIT: vfp_thread_exit(thread); + break; + + case THREAD_NOTIFY_COPY: + vfp_thread_copy(thread); + break; + } return NOTIFY_DONE; } diff --git a/arch/avr32/include/asm/setup.h b/arch/avr32/include/asm/setup.h index ff5b7cf6be4..160543dbec7 100644 --- a/arch/avr32/include/asm/setup.h +++ b/arch/avr32/include/asm/setup.h @@ -94,6 +94,13 @@ struct tag_ethernet { #define ETH_INVALID_PHY 0xff +/* board information */ +#define ATAG_BOARDINFO 0x54410008 + +struct tag_boardinfo { + u32 board_number; +}; + struct tag { struct tag_header hdr; union { @@ -102,6 +109,7 @@ struct tag { struct tag_cmdline cmdline; struct tag_clock clock; struct tag_ethernet ethernet; + struct tag_boardinfo boardinfo; } u; }; @@ -128,6 +136,7 @@ extern struct tag *bootloader_tags; extern resource_size_t fbmem_start; extern resource_size_t fbmem_size; +extern u32 board_number; void setup_processor(void); diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c index 5c7083916c3..bb0974cce4a 100644 --- a/arch/avr32/kernel/setup.c +++ b/arch/avr32/kernel/setup.c @@ -391,6 +391,21 @@ static int __init parse_tag_clock(struct tag *tag) __tagtable(ATAG_CLOCK, parse_tag_clock); /* + * The board_number correspond to the bd->bi_board_number in U-Boot. This + * parameter is only available during initialisation and can be used in some + * kind of board identification. + */ +u32 __initdata board_number; + +static int __init parse_tag_boardinfo(struct tag *tag) +{ + board_number = tag->u.boardinfo.board_number; + + return 0; +} +__tagtable(ATAG_BOARDINFO, parse_tag_boardinfo); + +/* * Scan the tag table for this tag, and call its parse function. The * tag table is built by the linker from all the __tagtable * declarations. diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c index b91b2044af9..7aa25756412 100644 --- a/arch/avr32/kernel/traps.c +++ b/arch/avr32/kernel/traps.c @@ -95,28 +95,6 @@ void _exception(long signr, struct pt_regs *regs, int code, info.si_code = code; info.si_addr = (void __user *)addr; force_sig_info(signr, &info, current); - - /* - * Init gets no signals that it doesn't have a handler for. - * That's all very well, but if it has caused a synchronous - * exception and we ignore the resulting signal, it will just - * generate the same exception over and over again and we get - * nowhere. Better to kill it and let the kernel panic. - */ - if (is_global_init(current)) { - __sighandler_t handler; - - spin_lock_irq(¤t->sighand->siglock); - handler = current->sighand->action[signr-1].sa.sa_handler; - spin_unlock_irq(¤t->sighand->siglock); - if (handler == SIG_DFL) { - /* init has generated a synchronous exception - and it doesn't have a handler for the signal */ - printk(KERN_CRIT "init has generated signal %ld " - "but has no handler for it\n", signr); - do_exit(signr); - } - } } asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs) diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c index 442f08c5e64..86925fd6ea5 100644 --- a/arch/avr32/mach-at32ap/clock.c +++ b/arch/avr32/mach-at32ap/clock.c @@ -35,22 +35,30 @@ void at32_clk_register(struct clk *clk) spin_unlock(&clk_list_lock); } -struct clk *clk_get(struct device *dev, const char *id) +static struct clk *__clk_get(struct device *dev, const char *id) { struct clk *clk; - spin_lock(&clk_list_lock); - list_for_each_entry(clk, &at32_clock_list, list) { if (clk->dev == dev && strcmp(id, clk->name) == 0) { - spin_unlock(&clk_list_lock); return clk; } } - spin_unlock(&clk_list_lock); return ERR_PTR(-ENOENT); } + +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *clk; + + spin_lock(&clk_list_lock); + clk = __clk_get(dev, id); + spin_unlock(&clk_list_lock); + + return clk; +} + EXPORT_SYMBOL(clk_get); void clk_put(struct clk *clk) @@ -257,15 +265,15 @@ static int clk_show(struct seq_file *s, void *unused) spin_lock(&clk_list_lock); /* show clock tree as derived from the three oscillators */ - clk = clk_get(NULL, "osc32k"); + clk = __clk_get(NULL, "osc32k"); dump_clock(clk, &r); clk_put(clk); - clk = clk_get(NULL, "osc0"); + clk = __clk_get(NULL, "osc0"); dump_clock(clk, &r); clk_put(clk); - clk = clk_get(NULL, "osc1"); + clk = __clk_get(NULL, "osc1"); dump_clock(clk, &r); clk_put(clk); diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c index 47ba4b9b6db..fbc2aeaebdd 100644 --- a/arch/avr32/mach-at32ap/extint.c +++ b/arch/avr32/mach-at32ap/extint.c @@ -61,34 +61,34 @@ struct eic { static struct eic *nmi_eic; static bool nmi_enabled; -static void eic_ack_irq(struct irq_chip *d) +static void eic_ack_irq(struct irq_data *d) { - struct eic *eic = irq_data_get_irq_chip_data(data); + struct eic *eic = irq_data_get_irq_chip_data(d); eic_writel(eic, ICR, 1 << (d->irq - eic->first_irq)); } -static void eic_mask_irq(struct irq_chip *d) +static void eic_mask_irq(struct irq_data *d) { - struct eic *eic = irq_data_get_irq_chip_data(data); + struct eic *eic = irq_data_get_irq_chip_data(d); eic_writel(eic, IDR, 1 << (d->irq - eic->first_irq)); } -static void eic_mask_ack_irq(struct irq_chip *d) +static void eic_mask_ack_irq(struct irq_data *d) { - struct eic *eic = irq_data_get_irq_chip_data(data); + struct eic *eic = irq_data_get_irq_chip_data(d); eic_writel(eic, ICR, 1 << (d->irq - eic->first_irq)); eic_writel(eic, IDR, 1 << (d->irq - eic->first_irq)); } -static void eic_unmask_irq(struct irq_chip *d) +static void eic_unmask_irq(struct irq_data *d) { - struct eic *eic = irq_data_get_irq_chip_data(data); + struct eic *eic = irq_data_get_irq_chip_data(d); eic_writel(eic, IER, 1 << (d->irq - eic->first_irq)); } -static int eic_set_irq_type(struct irq_chip *d, unsigned int flow_type) +static int eic_set_irq_type(struct irq_data *d, unsigned int flow_type) { - struct eic *eic = irq_data_get_irq_chip_data(data); + struct eic *eic = irq_data_get_irq_chip_data(d); unsigned int irq = d->irq; unsigned int i = irq - eic->first_irq; u32 mode, edge, level; @@ -191,7 +191,7 @@ static int __init eic_probe(struct platform_device *pdev) regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); int_irq = platform_get_irq(pdev, 0); - if (!regs || !int_irq) { + if (!regs || (int)int_irq <= 0) { dev_dbg(&pdev->dev, "missing regs and/or irq resource\n"); return -ENXIO; } diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c index f308e1ddc62..2e0aa853a4b 100644 --- a/arch/avr32/mach-at32ap/pio.c +++ b/arch/avr32/mach-at32ap/pio.c @@ -257,7 +257,7 @@ static void gpio_irq_mask(struct irq_data *d) pio_writel(pio, IDR, 1 << (gpio & 0x1f)); } -static void gpio_irq_unmask(struct irq_data *d)) +static void gpio_irq_unmask(struct irq_data *d) { unsigned gpio = irq_to_gpio(d->irq); struct pio_device *pio = &pio_dev[gpio >> 5]; diff --git a/arch/avr32/mach-at32ap/pm-at32ap700x.S b/arch/avr32/mach-at32ap/pm-at32ap700x.S index 17503b0ed6c..f868f4ce761 100644 --- a/arch/avr32/mach-at32ap/pm-at32ap700x.S +++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S @@ -53,7 +53,7 @@ cpu_enter_idle: st.w r8[TI_flags], r9 unmask_interrupts sleep CPU_SLEEP_IDLE - .size cpu_idle_sleep, . - cpu_idle_sleep + .size cpu_enter_idle, . - cpu_enter_idle /* * Common return path for PM functions that don't run from diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h index 19e2c7c3e63..44bd0cced72 100644 --- a/arch/blackfin/include/asm/system.h +++ b/arch/blackfin/include/asm/system.h @@ -19,11 +19,11 @@ * Force strict CPU ordering. */ #define nop() __asm__ __volatile__ ("nop;\n\t" : : ) -#define mb() __asm__ __volatile__ ("" : : : "memory") -#define rmb() __asm__ __volatile__ ("" : : : "memory") -#define wmb() __asm__ __volatile__ ("" : : : "memory") -#define set_mb(var, value) do { (void) xchg(&var, value); } while (0) -#define read_barrier_depends() do { } while(0) +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define set_mb(var, value) do { var = value; mb(); } while (0) +#define smp_read_barrier_depends() read_barrier_depends() #ifdef CONFIG_SMP asmlinkage unsigned long __raw_xchg_1_asm(volatile void *ptr, unsigned long value); @@ -37,16 +37,16 @@ asmlinkage unsigned long __raw_cmpxchg_4_asm(volatile void *ptr, unsigned long new, unsigned long old); #ifdef __ARCH_SYNC_CORE_DCACHE -# define smp_mb() do { barrier(); smp_check_barrier(); smp_mark_barrier(); } while (0) -# define smp_rmb() do { barrier(); smp_check_barrier(); } while (0) -# define smp_wmb() do { barrier(); smp_mark_barrier(); } while (0) -#define smp_read_barrier_depends() do { barrier(); smp_check_barrier(); } while (0) - +/* Force Core data cache coherence */ +# define mb() do { barrier(); smp_check_barrier(); smp_mark_barrier(); } while (0) +# define rmb() do { barrier(); smp_check_barrier(); } while (0) +# define wmb() do { barrier(); smp_mark_barrier(); } while (0) +# define read_barrier_depends() do { barrier(); smp_check_barrier(); } while (0) #else -# define smp_mb() barrier() -# define smp_rmb() barrier() -# define smp_wmb() barrier() -#define smp_read_barrier_depends() barrier() +# define mb() barrier() +# define rmb() barrier() +# define wmb() barrier() +# define read_barrier_depends() do { } while (0) #endif static inline unsigned long __xchg(unsigned long x, volatile void *ptr, @@ -99,10 +99,10 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, #else /* !CONFIG_SMP */ -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while(0) +#define mb() barrier() +#define rmb() barrier() +#define wmb() barrier() +#define read_barrier_depends() do { } while (0) struct __xchg_dummy { unsigned long a[100]; diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c index cdbe075de1d..8b81dc04488 100644 --- a/arch/blackfin/kernel/gptimers.c +++ b/arch/blackfin/kernel/gptimers.c @@ -268,7 +268,7 @@ void disable_gptimers(uint16_t mask) _disable_gptimers(mask); for (i = 0; i < MAX_BLACKFIN_GPTIMERS; ++i) if (mask & (1 << i)) - group_regs[BFIN_TIMER_OCTET(i)]->status |= trun_mask[i]; + group_regs[BFIN_TIMER_OCTET(i)]->status = trun_mask[i]; SSYNC(); } EXPORT_SYMBOL(disable_gptimers); diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c index 8c9a43daf80..cdb4beb6bc8 100644 --- a/arch/blackfin/kernel/time-ts.c +++ b/arch/blackfin/kernel/time-ts.c @@ -206,8 +206,14 @@ irqreturn_t bfin_gptmr0_interrupt(int irq, void *dev_id) { struct clock_event_device *evt = dev_id; smp_mb(); - evt->event_handler(evt); + /* + * We want to ACK before we handle so that we can handle smaller timer + * intervals. This way if the timer expires again while we're handling + * things, we're more likely to see that 2nd int rather than swallowing + * it by ACKing the int at the end of this handler. + */ bfin_gptmr0_ack(); + evt->event_handler(evt); return IRQ_HANDLED; } diff --git a/arch/blackfin/mach-common/dpmc.c b/arch/blackfin/mach-common/dpmc.c index 382099fd556..5e4112e518a 100644 --- a/arch/blackfin/mach-common/dpmc.c +++ b/arch/blackfin/mach-common/dpmc.c @@ -19,9 +19,6 @@ #define DRIVER_NAME "bfin dpmc" -#define dprintk(msg...) \ - cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, DRIVER_NAME, msg) - struct bfin_dpmc_platform_data *pdata; /** diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 6e17a265c4d..8bce5ed031e 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -109,10 +109,23 @@ static void ipi_flush_icache(void *info) struct blackfin_flush_data *fdata = info; /* Invalidate the memory holding the bounds of the flushed region. */ - invalidate_dcache_range((unsigned long)fdata, - (unsigned long)fdata + sizeof(*fdata)); + blackfin_dcache_invalidate_range((unsigned long)fdata, + (unsigned long)fdata + sizeof(*fdata)); + + /* Make sure all write buffers in the data side of the core + * are flushed before trying to invalidate the icache. This + * needs to be after the data flush and before the icache + * flush so that the SSYNC does the right thing in preventing + * the instruction prefetcher from hitting things in cached + * memory at the wrong time -- it runs much further ahead than + * the pipeline. + */ + SSYNC(); - flush_icache_range(fdata->start, fdata->end); + /* ipi_flaush_icache is invoked by generic flush_icache_range, + * so call blackfin arch icache flush directly here. + */ + blackfin_icache_flush_range(fdata->start, fdata->end); } static void ipi_call_function(unsigned int cpu, struct ipi_message *msg) diff --git a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c index 22f61526a8e..f09b174244d 100644 --- a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c +++ b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c @@ -23,8 +23,6 @@ #include <linux/acpi.h> #include <acpi/processor.h> -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "acpi-cpufreq", msg) - MODULE_AUTHOR("Venkatesh Pallipadi"); MODULE_DESCRIPTION("ACPI Processor P-States Driver"); MODULE_LICENSE("GPL"); @@ -47,12 +45,12 @@ processor_set_pstate ( { s64 retval; - dprintk("processor_set_pstate\n"); + pr_debug("processor_set_pstate\n"); retval = ia64_pal_set_pstate((u64)value); if (retval) { - dprintk("Failed to set freq to 0x%x, with error 0x%lx\n", + pr_debug("Failed to set freq to 0x%x, with error 0x%lx\n", value, retval); return -ENODEV; } @@ -67,14 +65,14 @@ processor_get_pstate ( u64 pstate_index = 0; s64 retval; - dprintk("processor_get_pstate\n"); + pr_debug("processor_get_pstate\n"); retval = ia64_pal_get_pstate(&pstate_index, PAL_GET_PSTATE_TYPE_INSTANT); *value = (u32) pstate_index; if (retval) - dprintk("Failed to get current freq with " + pr_debug("Failed to get current freq with " "error 0x%lx, idx 0x%x\n", retval, *value); return (int)retval; @@ -90,7 +88,7 @@ extract_clock ( { unsigned long i; - dprintk("extract_clock\n"); + pr_debug("extract_clock\n"); for (i = 0; i < data->acpi_data.state_count; i++) { if (value == data->acpi_data.states[i].status) @@ -110,7 +108,7 @@ processor_get_freq ( cpumask_t saved_mask; unsigned long clock_freq; - dprintk("processor_get_freq\n"); + pr_debug("processor_get_freq\n"); saved_mask = current->cpus_allowed; set_cpus_allowed_ptr(current, cpumask_of(cpu)); @@ -148,7 +146,7 @@ processor_set_freq ( cpumask_t saved_mask; int retval; - dprintk("processor_set_freq\n"); + pr_debug("processor_set_freq\n"); saved_mask = current->cpus_allowed; set_cpus_allowed_ptr(current, cpumask_of(cpu)); @@ -159,16 +157,16 @@ processor_set_freq ( if (state == data->acpi_data.state) { if (unlikely(data->resume)) { - dprintk("Called after resume, resetting to P%d\n", state); + pr_debug("Called after resume, resetting to P%d\n", state); data->resume = 0; } else { - dprintk("Already at target state (P%d)\n", state); + pr_debug("Already at target state (P%d)\n", state); retval = 0; goto migrate_end; } } - dprintk("Transitioning from P%d to P%d\n", + pr_debug("Transitioning from P%d to P%d\n", data->acpi_data.state, state); /* cpufreq frequency struct */ @@ -186,7 +184,7 @@ processor_set_freq ( value = (u32) data->acpi_data.states[state].control; - dprintk("Transitioning to state: 0x%08x\n", value); + pr_debug("Transitioning to state: 0x%08x\n", value); ret = processor_set_pstate(value); if (ret) { @@ -219,7 +217,7 @@ acpi_cpufreq_get ( { struct cpufreq_acpi_io *data = acpi_io_data[cpu]; - dprintk("acpi_cpufreq_get\n"); + pr_debug("acpi_cpufreq_get\n"); return processor_get_freq(data, cpu); } @@ -235,7 +233,7 @@ acpi_cpufreq_target ( unsigned int next_state = 0; unsigned int result = 0; - dprintk("acpi_cpufreq_setpolicy\n"); + pr_debug("acpi_cpufreq_setpolicy\n"); result = cpufreq_frequency_table_target(policy, data->freq_table, target_freq, relation, &next_state); @@ -255,7 +253,7 @@ acpi_cpufreq_verify ( unsigned int result = 0; struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu]; - dprintk("acpi_cpufreq_verify\n"); + pr_debug("acpi_cpufreq_verify\n"); result = cpufreq_frequency_table_verify(policy, data->freq_table); @@ -273,7 +271,7 @@ acpi_cpufreq_cpu_init ( struct cpufreq_acpi_io *data; unsigned int result = 0; - dprintk("acpi_cpufreq_cpu_init\n"); + pr_debug("acpi_cpufreq_cpu_init\n"); data = kzalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL); if (!data) @@ -288,7 +286,7 @@ acpi_cpufreq_cpu_init ( /* capability check */ if (data->acpi_data.state_count <= 1) { - dprintk("No P-States\n"); + pr_debug("No P-States\n"); result = -ENODEV; goto err_unreg; } @@ -297,7 +295,7 @@ acpi_cpufreq_cpu_init ( ACPI_ADR_SPACE_FIXED_HARDWARE) || (data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) { - dprintk("Unsupported address space [%d, %d]\n", + pr_debug("Unsupported address space [%d, %d]\n", (u32) (data->acpi_data.control_register.space_id), (u32) (data->acpi_data.status_register.space_id)); result = -ENODEV; @@ -348,7 +346,7 @@ acpi_cpufreq_cpu_init ( "activated.\n", cpu); for (i = 0; i < data->acpi_data.state_count; i++) - dprintk(" %cP%d: %d MHz, %d mW, %d uS, %d uS, 0x%x 0x%x\n", + pr_debug(" %cP%d: %d MHz, %d mW, %d uS, %d uS, 0x%x 0x%x\n", (i == data->acpi_data.state?'*':' '), i, (u32) data->acpi_data.states[i].core_frequency, (u32) data->acpi_data.states[i].power, @@ -383,7 +381,7 @@ acpi_cpufreq_cpu_exit ( { struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu]; - dprintk("acpi_cpufreq_cpu_exit\n"); + pr_debug("acpi_cpufreq_cpu_exit\n"); if (data) { cpufreq_frequency_table_put_attr(policy->cpu); @@ -418,7 +416,7 @@ static struct cpufreq_driver acpi_cpufreq_driver = { static int __init acpi_cpufreq_init (void) { - dprintk("acpi_cpufreq_init\n"); + pr_debug("acpi_cpufreq_init\n"); return cpufreq_register_driver(&acpi_cpufreq_driver); } @@ -427,7 +425,7 @@ acpi_cpufreq_init (void) static void __exit acpi_cpufreq_exit (void) { - dprintk("acpi_cpufreq_exit\n"); + pr_debug("acpi_cpufreq_exit\n"); cpufreq_unregister_driver(&acpi_cpufreq_driver); return; diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index 26d851d385b..29e17907d9f 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -343,10 +343,14 @@ #define __NR_fanotify_init 337 #define __NR_fanotify_mark 338 #define __NR_prlimit64 339 +#define __NR_name_to_handle_at 340 +#define __NR_open_by_handle_at 341 +#define __NR_clock_adjtime 342 +#define __NR_syncfs 343 #ifdef __KERNEL__ -#define NR_syscalls 340 +#define NR_syscalls 344 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/m68k/kernel/entry_mm.S b/arch/m68k/kernel/entry_mm.S index 1559dea36e5..1359ee65957 100644 --- a/arch/m68k/kernel/entry_mm.S +++ b/arch/m68k/kernel/entry_mm.S @@ -750,4 +750,8 @@ sys_call_table: .long sys_fanotify_init .long sys_fanotify_mark .long sys_prlimit64 + .long sys_name_to_handle_at /* 340 */ + .long sys_open_by_handle_at + .long sys_clock_adjtime + .long sys_syncfs diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S index 79b1ed198c0..9b8393d8adb 100644 --- a/arch/m68k/kernel/syscalltable.S +++ b/arch/m68k/kernel/syscalltable.S @@ -358,6 +358,10 @@ ENTRY(sys_call_table) .long sys_fanotify_init .long sys_fanotify_mark .long sys_prlimit64 + .long sys_name_to_handle_at /* 340 */ + .long sys_open_by_handle_at + .long sys_clock_adjtime + .long sys_syncfs .rept NR_syscalls-(.-sys_call_table)/4 .long sys_ni_syscall diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c index 02b7a03e422..8b3db1c587f 100644 --- a/arch/m68k/mm/motorola.c +++ b/arch/m68k/mm/motorola.c @@ -300,6 +300,8 @@ void __init paging_init(void) zones_size[ZONE_DMA] = m68k_memory[i].size >> PAGE_SHIFT; free_area_init_node(i, zones_size, m68k_memory[i].addr >> PAGE_SHIFT, NULL); + if (node_present_pages(i)) + node_set_state(i, N_NORMAL_MEMORY); } } diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 851b3bf6e96..eccdefe70d4 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -6,7 +6,6 @@ config MICROBLAZE select HAVE_FUNCTION_GRAPH_TRACER select HAVE_DYNAMIC_FTRACE select HAVE_FTRACE_MCOUNT_RECORD - select USB_ARCH_HAS_EHCI select ARCH_WANT_OPTIONAL_GPIOLIB select HAVE_OPROFILE select HAVE_ARCH_KGDB diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 8e256cc5dcd..351c80fbba7 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -997,9 +997,6 @@ config IRQ_GT641XX config IRQ_GIC bool -config IRQ_CPU_OCTEON - bool - config MIPS_BOARDS_GEN bool @@ -1359,8 +1356,6 @@ config CPU_SB1 config CPU_CAVIUM_OCTEON bool "Cavium Octeon processor" depends on SYS_HAS_CPU_CAVIUM_OCTEON - select IRQ_CPU - select IRQ_CPU_OCTEON select CPU_HAS_PREFETCH select CPU_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_SMP diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c index 05f120ff90f..5c956fe8760 100644 --- a/arch/mips/alchemy/devboards/db1x00/board_setup.c +++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c @@ -127,13 +127,10 @@ const char *get_system_type(void) void __init board_setup(void) { unsigned long bcsr1, bcsr2; - u32 pin_func; bcsr1 = DB1000_BCSR_PHYS_ADDR; bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS; - pin_func = 0; - #ifdef CONFIG_MIPS_DB1000 printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n"); #endif @@ -164,12 +161,16 @@ void __init board_setup(void) /* Not valid for Au1550 */ #if defined(CONFIG_IRDA) && \ (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100)) - /* Set IRFIRSEL instead of GPIO15 */ - pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF; - au_writel(pin_func, SYS_PINFUNC); - /* Power off until the driver is in use */ - bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK, - BCSR_RESETS_IRDA_MODE_OFF); + { + u32 pin_func; + + /* Set IRFIRSEL instead of GPIO15 */ + pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF; + au_writel(pin_func, SYS_PINFUNC); + /* Power off until the driver is in use */ + bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK, + BCSR_RESETS_IRDA_MODE_OFF); + } #endif bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */ @@ -177,31 +178,35 @@ void __init board_setup(void) alchemy_gpio1_input_enable(); #ifdef CONFIG_MIPS_MIRAGE - /* GPIO[20] is output */ - alchemy_gpio_direction_output(20, 0); + { + u32 pin_func; - /* Set GPIO[210:208] instead of SSI_0 */ - pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0; + /* GPIO[20] is output */ + alchemy_gpio_direction_output(20, 0); - /* Set GPIO[215:211] for LEDs */ - pin_func |= 5 << 2; + /* Set GPIO[210:208] instead of SSI_0 */ + pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0; - /* Set GPIO[214:213] for more LEDs */ - pin_func |= 5 << 12; + /* Set GPIO[215:211] for LEDs */ + pin_func |= 5 << 2; - /* Set GPIO[207:200] instead of PCMCIA/LCD */ - pin_func |= SYS_PF_LCD | SYS_PF_PC; - au_writel(pin_func, SYS_PINFUNC); + /* Set GPIO[214:213] for more LEDs */ + pin_func |= 5 << 12; - /* - * Enable speaker amplifier. This should - * be part of the audio driver. - */ - alchemy_gpio_direction_output(209, 1); + /* Set GPIO[207:200] instead of PCMCIA/LCD */ + pin_func |= SYS_PF_LCD | SYS_PF_PC; + au_writel(pin_func, SYS_PINFUNC); - pm_power_off = mirage_power_off; - _machine_halt = mirage_power_off; - _machine_restart = (void(*)(char *))mips_softreset; + /* + * Enable speaker amplifier. This should + * be part of the audio driver. + */ + alchemy_gpio_direction_output(209, 1); + + pm_power_off = mirage_power_off; + _machine_halt = mirage_power_off; + _machine_restart = (void(*)(char *))mips_softreset; + } #endif #ifdef CONFIG_MIPS_BOSPORUS diff --git a/arch/mips/alchemy/xxs1500/init.c b/arch/mips/alchemy/xxs1500/init.c index 15125c2fda7..34a90a4bb6f 100644 --- a/arch/mips/alchemy/xxs1500/init.c +++ b/arch/mips/alchemy/xxs1500/init.c @@ -51,10 +51,9 @@ void __init prom_init(void) prom_init_cmdline(); memsize_str = prom_getenv("memsize"); - if (!memsize_str) + if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize)) memsize = 0x04000000; - else - strict_strtoul(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c index 425dfa5d6e1..bb571bcdb8f 100644 --- a/arch/mips/ar7/gpio.c +++ b/arch/mips/ar7/gpio.c @@ -325,9 +325,7 @@ int __init ar7_gpio_init(void) size = 0x1f; } - gpch->regs = ioremap_nocache(AR7_REGS_GPIO, - AR7_REGS_GPIO + 0x10); - + gpch->regs = ioremap_nocache(AR7_REGS_GPIO, size); if (!gpch->regs) { printk(KERN_ERR "%s: failed to ioremap regs\n", gpch->chip.label); diff --git a/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c index 88c9d963be8..9a6243676e2 100644 --- a/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c +++ b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c @@ -16,8 +16,8 @@ int main(int argc, char *argv[]) { + unsigned long long vmlinux_size, vmlinux_load_addr, vmlinuz_load_addr; struct stat sb; - uint64_t vmlinux_size, vmlinux_load_addr, vmlinuz_load_addr; if (argc != 3) { fprintf(stderr, "Usage: %s <pathname> <vmlinux_load_addr>\n", diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig index caae2285816..cad555ebeca 100644 --- a/arch/mips/cavium-octeon/Kconfig +++ b/arch/mips/cavium-octeon/Kconfig @@ -1,11 +1,7 @@ -config CAVIUM_OCTEON_SPECIFIC_OPTIONS - bool "Enable Octeon specific options" - depends on CPU_CAVIUM_OCTEON - default "y" +if CPU_CAVIUM_OCTEON config CAVIUM_CN63XXP1 bool "Enable CN63XXP1 errata worarounds" - depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS default "n" help The CN63XXP1 chip requires build time workarounds to @@ -16,7 +12,6 @@ config CAVIUM_CN63XXP1 config CAVIUM_OCTEON_2ND_KERNEL bool "Build the kernel to be used as a 2nd kernel on the same chip" - depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS default "n" help This option configures this kernel to be linked at a different @@ -26,7 +21,6 @@ config CAVIUM_OCTEON_2ND_KERNEL config CAVIUM_OCTEON_HW_FIX_UNALIGNED bool "Enable hardware fixups of unaligned loads and stores" - depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS default "y" help Configure the Octeon hardware to automatically fix unaligned loads @@ -38,7 +32,6 @@ config CAVIUM_OCTEON_HW_FIX_UNALIGNED config CAVIUM_OCTEON_CVMSEG_SIZE int "Number of L1 cache lines reserved for CVMSEG memory" - depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS range 0 54 default 1 help @@ -50,7 +43,6 @@ config CAVIUM_OCTEON_CVMSEG_SIZE config CAVIUM_OCTEON_LOCK_L2 bool "Lock often used kernel code in the L2" - depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS default "y" help Enable locking parts of the kernel into the L2 cache. @@ -93,7 +85,6 @@ config CAVIUM_OCTEON_LOCK_L2_MEMCPY config ARCH_SPARSEMEM_ENABLE def_bool y select SPARSEMEM_STATIC - depends on CPU_CAVIUM_OCTEON config CAVIUM_OCTEON_HELPER def_bool y @@ -107,6 +98,8 @@ config NEED_SG_DMA_LENGTH config SWIOTLB def_bool y - depends on CPU_CAVIUM_OCTEON select IOMMU_HELPER select NEED_SG_DMA_LENGTH + + +endif # CPU_CAVIUM_OCTEON diff --git a/arch/mips/include/asm/cache.h b/arch/mips/include/asm/cache.h index 650ac9ba734..b4db69fbc40 100644 --- a/arch/mips/include/asm/cache.h +++ b/arch/mips/include/asm/cache.h @@ -17,6 +17,6 @@ #define SMP_CACHE_SHIFT L1_CACHE_SHIFT #define SMP_CACHE_BYTES L1_CACHE_BYTES -#define __read_mostly __attribute__((__section__(".data.read_mostly"))) +#define __read_mostly __attribute__((__section__(".data..read_mostly"))) #endif /* _ASM_CACHE_H */ diff --git a/arch/mips/include/asm/cevt-r4k.h b/arch/mips/include/asm/cevt-r4k.h index fa4328f9124..65f9bdd02f1 100644 --- a/arch/mips/include/asm/cevt-r4k.h +++ b/arch/mips/include/asm/cevt-r4k.h @@ -14,6 +14,9 @@ #ifndef __ASM_CEVT_R4K_H #define __ASM_CEVT_R4K_H +#include <linux/clockchips.h> +#include <asm/time.h> + DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device); void mips_event_handler(struct clock_event_device *dev); diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h index 655f849bd08..7aa37ddfca4 100644 --- a/arch/mips/include/asm/dma-mapping.h +++ b/arch/mips/include/asm/dma-mapping.h @@ -5,7 +5,9 @@ #include <asm/cache.h> #include <asm-generic/dma-coherent.h> +#ifndef CONFIG_SGI_IP27 /* Kludge to fix 2.6.39 build for IP27 */ #include <dma-coherence.h> +#endif extern struct dma_map_ops *mips_dma_map_ops; diff --git a/arch/mips/include/asm/hugetlb.h b/arch/mips/include/asm/hugetlb.h index f5e85601532..c565b7c3f0b 100644 --- a/arch/mips/include/asm/hugetlb.h +++ b/arch/mips/include/asm/hugetlb.h @@ -70,6 +70,7 @@ static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) { + flush_tlb_mm(vma->vm_mm); } static inline int huge_pte_none(pte_t pte) diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h index 32978d32561..ed72e6a26b7 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h @@ -88,7 +88,7 @@ struct bcm_tag { char kernel_crc[CRC_LEN]; /* 228-235: Unused at present */ char reserved1[8]; - /* 236-239: CRC32 of header excluding tagVersion */ + /* 236-239: CRC32 of header excluding last 20 bytes */ char header_crc[CRC_LEN]; /* 240-255: Unused at present */ char reserved2[16]; diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c index 9ce9f64cb76..2d8e447cb82 100644 --- a/arch/mips/jazz/jazzdma.c +++ b/arch/mips/jazz/jazzdma.c @@ -211,7 +211,7 @@ EXPORT_SYMBOL(vdma_free); */ int vdma_remap(unsigned long laddr, unsigned long paddr, unsigned long size) { - int first, pages, npages; + int first, pages; if (laddr > 0xffffff) { if (vdma_debug) @@ -228,8 +228,7 @@ int vdma_remap(unsigned long laddr, unsigned long paddr, unsigned long size) return -EINVAL; /* invalid physical address */ } - npages = pages = - (((paddr & (VDMA_PAGESIZE - 1)) + size) >> 12) + 1; + pages = (((paddr & (VDMA_PAGESIZE - 1)) + size) >> 12) + 1; first = laddr >> 12; if (vdma_debug) printk("vdma_remap: first=%x, pages=%x\n", first, pages); diff --git a/arch/mips/jz4740/dma.c b/arch/mips/jz4740/dma.c index 5ebe75a6835..d7feb898692 100644 --- a/arch/mips/jz4740/dma.c +++ b/arch/mips/jz4740/dma.c @@ -242,9 +242,7 @@ EXPORT_SYMBOL_GPL(jz4740_dma_get_residue); static void jz4740_dma_chan_irq(struct jz4740_dma_chan *dma) { - uint32_t status; - - status = jz4740_dma_read(JZ_REG_DMA_STATUS_CTRL(dma->id)); + (void) jz4740_dma_read(JZ_REG_DMA_STATUS_CTRL(dma->id)); jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id), 0, JZ_DMA_STATUS_CTRL_ENABLE | JZ_DMA_STATUS_CTRL_TRANSFER_DONE); diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c index fe01678d94f..eaa853a54af 100644 --- a/arch/mips/jz4740/time.c +++ b/arch/mips/jz4740/time.c @@ -89,7 +89,7 @@ static int jz4740_clockevent_set_next(unsigned long evt, static struct clock_event_device jz4740_clockevent = { .name = "jz4740-timer", - .features = CLOCK_EVT_FEAT_PERIODIC, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_next_event = jz4740_clockevent_set_next, .set_mode = jz4740_clockevent_set_mode, .rating = 200, diff --git a/arch/mips/jz4740/timer.c b/arch/mips/jz4740/timer.c index b2c01512905..654d5c3900b 100644 --- a/arch/mips/jz4740/timer.c +++ b/arch/mips/jz4740/timer.c @@ -27,11 +27,13 @@ void jz4740_timer_enable_watchdog(void) { writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR); } +EXPORT_SYMBOL_GPL(jz4740_timer_enable_watchdog); void jz4740_timer_disable_watchdog(void) { writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_SET); } +EXPORT_SYMBOL_GPL(jz4740_timer_disable_watchdog); void __init jz4740_timer_init(void) { diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c index 94ca2b018af..feb8021a305 100644 --- a/arch/mips/kernel/ftrace.c +++ b/arch/mips/kernel/ftrace.c @@ -23,6 +23,7 @@ #define JAL 0x0c000000 /* jump & link: ip --> ra, jump to target */ #define ADDR_MASK 0x03ffffff /* op_code|addr : 31...26|25 ....0 */ +#define JUMP_RANGE_MASK ((1UL << 28) - 1) #define INSN_NOP 0x00000000 /* nop */ #define INSN_JAL(addr) \ @@ -44,12 +45,12 @@ static inline void ftrace_dyn_arch_init_insns(void) /* jal (ftrace_caller + 8), jump over the first two instruction */ buf = (u32 *)&insn_jal_ftrace_caller; - uasm_i_jal(&buf, (FTRACE_ADDR + 8)); + uasm_i_jal(&buf, (FTRACE_ADDR + 8) & JUMP_RANGE_MASK); #ifdef CONFIG_FUNCTION_GRAPH_TRACER /* j ftrace_graph_caller */ buf = (u32 *)&insn_j_ftrace_graph_caller; - uasm_i_j(&buf, (unsigned long)ftrace_graph_caller); + uasm_i_j(&buf, (unsigned long)ftrace_graph_caller & JUMP_RANGE_MASK); #endif } diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index d21c388c011..584e6b55c86 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -540,8 +540,8 @@ asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit) secure_computing(regs->regs[2]); if (unlikely(current->audit_context) && entryexit) - audit_syscall_exit(AUDITSC_RESULT(regs->regs[2]), - regs->regs[2]); + audit_syscall_exit(AUDITSC_RESULT(regs->regs[7]), + -regs->regs[2]); if (!(current->ptrace & PT_PTRACED)) goto out; diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 7f5468b38d4..7f1377eb22d 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -565,7 +565,7 @@ einval: li v0, -ENOSYS sys sys_ioprio_get 2 /* 4315 */ sys sys_utimensat 4 sys sys_signalfd 3 - sys sys_ni_syscall 0 + sys sys_ni_syscall 0 /* was timerfd */ sys sys_eventfd 1 sys sys_fallocate 6 /* 4320 */ sys sys_timerfd_create 2 diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index a2e1fcbc41d..7c0ef7f128b 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -404,7 +404,7 @@ sys_call_table: PTR sys_ioprio_get PTR sys_utimensat /* 5275 */ PTR sys_signalfd - PTR sys_ni_syscall + PTR sys_ni_syscall /* was timerfd */ PTR sys_eventfd PTR sys_fallocate PTR sys_timerfd_create /* 5280 */ diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index b2c7624995b..de6c5563bea 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -403,7 +403,7 @@ EXPORT(sysn32_call_table) PTR sys_ioprio_get PTR compat_sys_utimensat PTR compat_sys_signalfd /* 6280 */ - PTR sys_ni_syscall + PTR sys_ni_syscall /* was timerfd */ PTR sys_eventfd PTR sys_fallocate PTR sys_timerfd_create diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 049a9c8c49a..b0541dda883 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -522,7 +522,7 @@ sys_call_table: PTR sys_ioprio_get /* 4315 */ PTR compat_sys_utimensat PTR compat_sys_signalfd - PTR sys_ni_syscall + PTR sys_ni_syscall /* was timerfd */ PTR sys_eventfd PTR sys32_fallocate /* 4320 */ PTR sys_timerfd_create diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 71350f7f2d8..e9b3af27d84 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -374,7 +374,8 @@ void __noreturn die(const char *str, struct pt_regs *regs) unsigned long dvpret = dvpe(); #endif /* CONFIG_MIPS_MT_SMTC */ - notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV); + if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP) + sig = 0; console_verbose(); spin_lock_irq(&die_lock); @@ -383,9 +384,6 @@ void __noreturn die(const char *str, struct pt_regs *regs) mips_mt_regdump(dvpret); #endif /* CONFIG_MIPS_MT_SMTC */ - if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP) - sig = 0; - printk("%s[#%d]:\n", str, ++die_counter); show_registers(regs); add_taint(TAINT_DIE); diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 832afbb8758..e4b0b0bec03 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -74,6 +74,7 @@ SECTIONS INIT_TASK_DATA(PAGE_SIZE) NOSAVE_DATA CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT) + READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT) DATA_DATA CONSTRUCTORS } diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c index 11b193f848f..d93830ad611 100644 --- a/arch/mips/loongson/common/env.c +++ b/arch/mips/loongson/common/env.c @@ -29,9 +29,10 @@ unsigned long memsize, highmemsize; #define parse_even_earlier(res, option, p) \ do { \ - int ret; \ + unsigned int tmp __maybe_unused; \ + \ if (strncmp(option, (char *)p, strlen(option)) == 0) \ - ret = strict_strtol((char *)p + strlen(option"="), 10, &res); \ + tmp = strict_strtol((char *)p + strlen(option"="), 10, &res); \ } while (0) void __init prom_init_env(void) diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index b4923a75cb4..71bddf8f7d2 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -1075,7 +1075,6 @@ static int __cpuinit probe_scache(void) unsigned long flags, addr, begin, end, pow2; unsigned int config = read_c0_config(); struct cpuinfo_mips *c = ¤t_cpu_data; - int tmp; if (config & CONF_SC) return 0; @@ -1108,7 +1107,6 @@ static int __cpuinit probe_scache(void) /* Now search for the wrap around point. */ pow2 = (128 * 1024); - tmp = 0; for (addr = begin + (128 * 1024); addr < end; addr = begin + pow2) { cache_op(Index_Load_Tag_SD, addr); __asm__ __volatile__("nop; nop; nop; nop;"); /* hazard... */ diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 5ef294fbb6e..f5734c2c809 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -1151,8 +1151,8 @@ static void __cpuinit build_r4000_tlb_refill_handler(void) struct uasm_reloc *r = relocs; u32 *f; unsigned int final_len; - struct mips_huge_tlb_info htlb_info; - enum vmalloc64_mode vmalloc_mode; + struct mips_huge_tlb_info htlb_info __maybe_unused; + enum vmalloc64_mode vmalloc_mode __maybe_unused; memset(tlb_handler, 0, sizeof(tlb_handler)); memset(labels, 0, sizeof(labels)); diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c index 414f0c99b19..31180c321a1 100644 --- a/arch/mips/mti-malta/malta-init.c +++ b/arch/mips/mti-malta/malta-init.c @@ -193,8 +193,6 @@ extern struct plat_smp_ops msmtc_smp_ops; void __init prom_init(void) { - int result; - prom_argc = fw_arg0; _prom_argv = (int *) fw_arg1; _prom_envp = (int *) fw_arg2; @@ -360,20 +358,14 @@ void __init prom_init(void) #ifdef CONFIG_SERIAL_8250_CONSOLE console_config(); #endif - /* Early detection of CMP support */ - result = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ); - #ifdef CONFIG_MIPS_CMP - if (result) + /* Early detection of CMP support */ + if (gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ)) register_smp_ops(&cmp_smp_ops); + else #endif #ifdef CONFIG_MIPS_MT_SMP -#ifdef CONFIG_MIPS_CMP - if (!result) register_smp_ops(&vsmp_smp_ops); -#else - register_smp_ops(&vsmp_smp_ops); -#endif #endif #ifdef CONFIG_MIPS_MT_SMTC register_smp_ops(&msmtc_smp_ops); diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index 9027061f0ea..e85c977328d 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -56,7 +56,6 @@ static DEFINE_RAW_SPINLOCK(mips_irq_lock); static inline int mips_pcibios_iack(void) { int irq; - u32 dummy; /* * Determine highest priority pending interrupt by performing @@ -83,7 +82,7 @@ static inline int mips_pcibios_iack(void) BONITO_PCIMAP_CFG = 0x20000; /* Flush Bonito register block */ - dummy = BONITO_PCIMAP_CFG; + (void) BONITO_PCIMAP_CFG; iob(); /* sync */ irq = __raw_readl((u32 *)_pcictrl_bonito_pcicfg); diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c b/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c index f9b9dcdfa9d..98fd0099d96 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c @@ -97,7 +97,7 @@ static int msp_per_irq_set_affinity(struct irq_data *d, static struct irq_chip msp_per_irq_controller = { .name = "MSP_PER", - .irq_enable = unmask_per_irq. + .irq_enable = unmask_per_irq, .irq_disable = mask_per_irq, .irq_ack = msp_per_irq_ack, #ifdef CONFIG_SMP diff --git a/arch/mips/power/hibernate.S b/arch/mips/power/hibernate.S index dbb5c7b4b70..f8a751c0328 100644 --- a/arch/mips/power/hibernate.S +++ b/arch/mips/power/hibernate.S @@ -35,7 +35,7 @@ LEAF(swsusp_arch_resume) 0: PTR_L t1, PBE_ADDRESS(t0) /* source */ PTR_L t2, PBE_ORIG_ADDRESS(t0) /* destination */ - PTR_ADDIU t3, t1, PAGE_SIZE + PTR_ADDU t3, t1, PAGE_SIZE 1: REG_L t8, (t1) REG_S t8, (t2) diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index 37de05d595e..6c47dfeb7be 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -185,7 +185,7 @@ int __init rb532_gpio_init(void) struct resource *r; r = rb532_gpio_reg0_res; - rb532_gpio_chip->regbase = ioremap_nocache(r->start, r->end - r->start); + rb532_gpio_chip->regbase = ioremap_nocache(r->start, resource_size(r)); if (!rb532_gpio_chip->regbase) { printk(KERN_ERR "rb532: cannot remap GPIO register 0\n"); diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c index deddbf0ebe5..698904daf90 100644 --- a/arch/mips/sgi-ip22/ip22-platform.c +++ b/arch/mips/sgi-ip22/ip22-platform.c @@ -132,7 +132,7 @@ static struct platform_device eth1_device = { */ static int __init sgiseeq_devinit(void) { - unsigned int tmp; + unsigned int pbdma __maybe_unused; int res, i; eth0_pd.hpc = hpc3c0; @@ -151,7 +151,7 @@ static int __init sgiseeq_devinit(void) /* Second HPC is missing? */ if (ip22_is_fullhouse() || - get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1])) + get_dbe(pbdma, (unsigned int *)&hpc3c1->pbdma[1])) return 0; sgimc->giopar |= SGIMC_GIOPAR_MASTEREXP1 | SGIMC_GIOPAR_EXP164 | diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c index 603fc91c103..1a94c989418 100644 --- a/arch/mips/sgi-ip22/ip22-time.c +++ b/arch/mips/sgi-ip22/ip22-time.c @@ -32,7 +32,7 @@ static unsigned long dosample(void) { u32 ct0, ct1; - u8 msb, lsb; + u8 msb; /* Start the counter. */ sgint->tcword = (SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL | @@ -46,7 +46,7 @@ static unsigned long dosample(void) /* Latch and spin until top byte of counter2 is zero */ do { writeb(SGINT_TCWORD_CNT2 | SGINT_TCWORD_CLAT, &sgint->tcword); - lsb = readb(&sgint->tcnt2); + (void) readb(&sgint->tcnt2); msb = readb(&sgint->tcnt2); ct1 = read_c0_count(); } while (msb); diff --git a/arch/mips/sgi-ip27/ip27-hubio.c b/arch/mips/sgi-ip27/ip27-hubio.c index a1fa4abb3f6..cd0d5b06cd8 100644 --- a/arch/mips/sgi-ip27/ip27-hubio.c +++ b/arch/mips/sgi-ip27/ip27-hubio.c @@ -29,7 +29,6 @@ unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget, unsigned long xtalk_addr, size_t size) { nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode); - volatile hubreg_t junk; unsigned i; /* use small-window mapping if possible */ @@ -64,7 +63,7 @@ unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget, * after we write it. */ IIO_ITTE_PUT(nasid, i, HUB_PIO_MAP_TO_MEM, widget, xtalk_addr); - junk = HUB_L(IIO_ITTE_GET(nasid, i)); + (void) HUB_L(IIO_ITTE_GET(nasid, i)); return NODE_BWIN_BASE(nasid, widget) + (xtalk_addr % BWIN_SIZE); } diff --git a/arch/mips/sgi-ip27/ip27-klnuma.c b/arch/mips/sgi-ip27/ip27-klnuma.c index c3d30a88daf..1d1919a44e8 100644 --- a/arch/mips/sgi-ip27/ip27-klnuma.c +++ b/arch/mips/sgi-ip27/ip27-klnuma.c @@ -54,11 +54,8 @@ void __init setup_replication_mask(void) static __init void set_ktext_source(nasid_t client_nasid, nasid_t server_nasid) { - cnodeid_t client_cnode; kern_vars_t *kvp; - client_cnode = NASID_TO_COMPACT_NODEID(client_nasid); - kvp = &hub_data(client_nasid)->kern_vars; KERN_VARS_ADDR(client_nasid) = (unsigned long)kvp; diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c index c76151b5656..0904d4d30cb 100644 --- a/arch/mips/sni/time.c +++ b/arch/mips/sni/time.c @@ -95,7 +95,7 @@ static void __init sni_a20r_timer_setup(void) static __init unsigned long dosample(void) { u32 ct0, ct1; - volatile u8 msb, lsb; + volatile u8 msb; /* Start the counter. */ outb_p(0x34, 0x43); @@ -108,7 +108,7 @@ static __init unsigned long dosample(void) /* Latch and spin until top byte of counter0 is zero */ do { outb(0x00, 0x43); - lsb = inb(0x40); + (void) inb(0x40); msb = inb(0x40); ct1 = read_c0_count(); } while (msb); diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index b7ed8d7a9b3..b1d126258de 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -266,8 +266,10 @@ static void __init setup_bootmem(void) } memset(pfnnid_map, 0xff, sizeof(pfnnid_map)); - for (i = 0; i < npmem_ranges; i++) + for (i = 0; i < npmem_ranges; i++) { + node_set_state(i, N_NORMAL_MEMORY); node_set_online(i); + } #endif /* diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index b6ff882f695..8f4d50b0adf 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -209,7 +209,7 @@ config ARCH_HIBERNATION_POSSIBLE config ARCH_SUSPEND_POSSIBLE def_bool y depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \ - PPC_85xx || PPC_86xx || PPC_PSERIES || 44x || 40x + (PPC_85xx && !SMP) || PPC_86xx || PPC_PSERIES || 44x || 40x config PPC_DCR_NATIVE bool diff --git a/arch/powerpc/include/asm/8xx_immap.h b/arch/powerpc/include/asm/8xx_immap.h index 6b6dc20b0be..bdf0563ba42 100644 --- a/arch/powerpc/include/asm/8xx_immap.h +++ b/arch/powerpc/include/asm/8xx_immap.h @@ -393,8 +393,8 @@ typedef struct fec { uint fec_addr_low; /* lower 32 bits of station address */ ushort fec_addr_high; /* upper 16 bits of station address */ ushort res1; /* reserved */ - uint fec_hash_table_high; /* upper 32-bits of hash table */ - uint fec_hash_table_low; /* lower 32-bits of hash table */ + uint fec_grp_hash_table_high; /* upper 32-bits of hash table */ + uint fec_grp_hash_table_low; /* lower 32-bits of hash table */ uint fec_r_des_start; /* beginning of Rx descriptor ring */ uint fec_x_des_start; /* beginning of Tx descriptor ring */ uint fec_r_buff_size; /* Rx buffer size */ diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index be3cdf9134c..1833d1a07e7 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -382,10 +382,12 @@ extern const char *powerpc_base_platform; #define CPU_FTRS_E500_2 (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | \ CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE) -#define CPU_FTRS_E500MC (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN | \ +#define CPU_FTRS_E500MC (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \ CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \ CPU_FTR_DBELL) +#define CPU_FTRS_E5500 (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \ + CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \ + CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD) #define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN) /* 64-bit CPUs */ @@ -435,11 +437,15 @@ extern const char *powerpc_base_platform; #define CPU_FTRS_COMPATIBLE (CPU_FTR_USE_TB | CPU_FTR_PPCAS_ARCH_V2) #ifdef __powerpc64__ +#ifdef CONFIG_PPC_BOOK3E +#define CPU_FTRS_POSSIBLE (CPU_FTRS_E5500) +#else #define CPU_FTRS_POSSIBLE \ (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \ CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 | \ CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T | \ CPU_FTR_1T_SEGMENT | CPU_FTR_VSX) +#endif #else enum { CPU_FTRS_POSSIBLE = @@ -473,16 +479,21 @@ enum { #endif #ifdef CONFIG_E500 CPU_FTRS_E500 | CPU_FTRS_E500_2 | CPU_FTRS_E500MC | + CPU_FTRS_E5500 | #endif 0, }; #endif /* __powerpc64__ */ #ifdef __powerpc64__ +#ifdef CONFIG_PPC_BOOK3E +#define CPU_FTRS_ALWAYS (CPU_FTRS_E5500) +#else #define CPU_FTRS_ALWAYS \ (CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 & \ CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 & \ CPU_FTRS_POWER7 & CPU_FTRS_CELL & CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE) +#endif #else enum { CPU_FTRS_ALWAYS = @@ -513,6 +524,7 @@ enum { #endif #ifdef CONFIG_E500 CPU_FTRS_E500 & CPU_FTRS_E500_2 & CPU_FTRS_E500MC & + CPU_FTRS_E5500 & #endif CPU_FTRS_POSSIBLE, }; diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h index 811f04ac366..8d1569c2904 100644 --- a/arch/powerpc/include/asm/pte-common.h +++ b/arch/powerpc/include/asm/pte-common.h @@ -162,7 +162,7 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void); * on platforms where such control is possible. */ #if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\ - defined(CONFIG_KPROBES) + defined(CONFIG_KPROBES) || defined(CONFIG_DYNAMIC_FTRACE) #define PAGE_KERNEL_TEXT PAGE_KERNEL_X #else #define PAGE_KERNEL_TEXT PAGE_KERNEL_ROX diff --git a/arch/powerpc/include/asm/uninorth.h b/arch/powerpc/include/asm/uninorth.h index ae9c899c8a6..d12b11d7641 100644 --- a/arch/powerpc/include/asm/uninorth.h +++ b/arch/powerpc/include/asm/uninorth.h @@ -60,7 +60,7 @@ * * Obviously, the GART is not cache coherent and so any change to it * must be flushed to memory (or maybe just make the GART space non - * cachable). AGP memory itself does't seem to be cache coherent neither. + * cachable). AGP memory itself doesn't seem to be cache coherent neither. * * In order to invalidate the GART (which is probably necessary to inval * the bridge internal TLBs), the following sequence has to be written, diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index c9b68d07ac4..b9602ee06de 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1973,7 +1973,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .pvr_mask = 0xffff0000, .pvr_value = 0x80240000, .cpu_name = "e5500", - .cpu_features = CPU_FTRS_E500MC, + .cpu_features = CPU_FTRS_E5500, .cpu_user_features = COMMON_USER_BOOKE, .mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS | MMU_FTR_USE_TLBILX, diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 3d3d416339d..5b5e1f002a8 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -163,7 +163,7 @@ static void crash_kexec_prepare_cpus(int cpu) } /* wait for all the CPUs to hit real mode but timeout if they don't come in */ -#if defined(CONFIG_PPC_STD_MMU_64) && defined(CONFIG_SMP) +#ifdef CONFIG_PPC_STD_MMU_64 static void crash_kexec_wait_realmode(int cpu) { unsigned int msecs; @@ -188,9 +188,7 @@ static void crash_kexec_wait_realmode(int cpu) } mb(); } -#else -static inline void crash_kexec_wait_realmode(int cpu) {} -#endif +#endif /* CONFIG_PPC_STD_MMU_64 */ /* * This function will be called by secondary cpus or by kexec cpu @@ -235,7 +233,9 @@ void crash_kexec_secondary(struct pt_regs *regs) crash_ipi_callback(regs); } -#else +#else /* ! CONFIG_SMP */ +static inline void crash_kexec_wait_realmode(int cpu) {} + static void crash_kexec_prepare_cpus(int cpu) { /* @@ -255,7 +255,7 @@ void crash_kexec_secondary(struct pt_regs *regs) { cpus_in_sr = CPU_MASK_NONE; } -#endif +#endif /* CONFIG_SMP */ /* * Register a function to be called on shutdown. Only use this if you diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c index c00d4ca1ee1..28581f1ad2c 100644 --- a/arch/powerpc/kernel/ibmebus.c +++ b/arch/powerpc/kernel/ibmebus.c @@ -527,7 +527,7 @@ static int ibmebus_bus_pm_resume_noirq(struct device *dev) #endif /* !CONFIG_SUSPEND */ -#ifdef CONFIG_HIBERNATION +#ifdef CONFIG_HIBERNATE_CALLBACKS static int ibmebus_bus_pm_freeze(struct device *dev) { @@ -665,7 +665,7 @@ static int ibmebus_bus_pm_restore_noirq(struct device *dev) return ret; } -#else /* !CONFIG_HIBERNATION */ +#else /* !CONFIG_HIBERNATE_CALLBACKS */ #define ibmebus_bus_pm_freeze NULL #define ibmebus_bus_pm_thaw NULL @@ -676,7 +676,7 @@ static int ibmebus_bus_pm_restore_noirq(struct device *dev) #define ibmebus_bus_pm_poweroff_noirq NULL #define ibmebus_bus_pm_restore_noirq NULL -#endif /* !CONFIG_HIBERNATION */ +#endif /* !CONFIG_HIBERNATE_CALLBACKS */ static struct dev_pm_ops ibmebus_bus_dev_pm_ops = { .prepare = ibmebus_bus_pm_prepare, diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index c834757bebc..2b97b80d6d7 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -330,9 +330,11 @@ void __init find_legacy_serial_ports(void) if (!parent) continue; if (of_match_node(legacy_serial_parents, parent) != NULL) { - index = add_legacy_soc_port(np, np); - if (index >= 0 && np == stdout) - legacy_serial_console = index; + if (of_device_is_available(np)) { + index = add_legacy_soc_port(np, np); + if (index >= 0 && np == stdout) + legacy_serial_console = index; + } } of_node_put(parent); } diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c index c4063b7f49a..822f63008ae 100644 --- a/arch/powerpc/kernel/perf_event.c +++ b/arch/powerpc/kernel/perf_event.c @@ -398,6 +398,25 @@ static int check_excludes(struct perf_event **ctrs, unsigned int cflags[], return 0; } +static u64 check_and_compute_delta(u64 prev, u64 val) +{ + u64 delta = (val - prev) & 0xfffffffful; + + /* + * POWER7 can roll back counter values, if the new value is smaller + * than the previous value it will cause the delta and the counter to + * have bogus values unless we rolled a counter over. If a coutner is + * rolled back, it will be smaller, but within 256, which is the maximum + * number of events to rollback at once. If we dectect a rollback + * return 0. This can lead to a small lack of precision in the + * counters. + */ + if (prev > val && (prev - val) < 256) + delta = 0; + + return delta; +} + static void power_pmu_read(struct perf_event *event) { s64 val, delta, prev; @@ -416,10 +435,11 @@ static void power_pmu_read(struct perf_event *event) prev = local64_read(&event->hw.prev_count); barrier(); val = read_pmc(event->hw.idx); + delta = check_and_compute_delta(prev, val); + if (!delta) + return; } while (local64_cmpxchg(&event->hw.prev_count, prev, val) != prev); - /* The counters are only 32 bits wide */ - delta = (val - prev) & 0xfffffffful; local64_add(delta, &event->count); local64_sub(delta, &event->hw.period_left); } @@ -449,8 +469,9 @@ static void freeze_limited_counters(struct cpu_hw_events *cpuhw, val = (event->hw.idx == 5) ? pmc5 : pmc6; prev = local64_read(&event->hw.prev_count); event->hw.idx = 0; - delta = (val - prev) & 0xfffffffful; - local64_add(delta, &event->count); + delta = check_and_compute_delta(prev, val); + if (delta) + local64_add(delta, &event->count); } } @@ -458,14 +479,16 @@ static void thaw_limited_counters(struct cpu_hw_events *cpuhw, unsigned long pmc5, unsigned long pmc6) { struct perf_event *event; - u64 val; + u64 val, prev; int i; for (i = 0; i < cpuhw->n_limited; ++i) { event = cpuhw->limited_counter[i]; event->hw.idx = cpuhw->limited_hwidx[i]; val = (event->hw.idx == 5) ? pmc5 : pmc6; - local64_set(&event->hw.prev_count, val); + prev = local64_read(&event->hw.prev_count); + if (check_and_compute_delta(prev, val)) + local64_set(&event->hw.prev_count, val); perf_event_update_userpage(event); } } @@ -1197,7 +1220,7 @@ static void record_and_restart(struct perf_event *event, unsigned long val, /* we don't have to worry about interrupts here */ prev = local64_read(&event->hw.prev_count); - delta = (val - prev) & 0xfffffffful; + delta = check_and_compute_delta(prev, val); local64_add(delta, &event->count); /* diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 55613e33e26..a6ae1cfad86 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -933,12 +933,16 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, if (data && !(data & DABR_TRANSLATION)) return -EIO; #ifdef CONFIG_HAVE_HW_BREAKPOINT + if (ptrace_get_breakpoints(task) < 0) + return -ESRCH; + bp = thread->ptrace_bps[0]; if ((!data) || !(data & (DABR_DATA_WRITE | DABR_DATA_READ))) { if (bp) { unregister_hw_breakpoint(bp); thread->ptrace_bps[0] = NULL; } + ptrace_put_breakpoints(task); return 0; } if (bp) { @@ -948,9 +952,12 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, (DABR_DATA_WRITE | DABR_DATA_READ), &attr.bp_type); ret = modify_user_hw_breakpoint(bp, &attr); - if (ret) + if (ret) { + ptrace_put_breakpoints(task); return ret; + } thread->ptrace_bps[0] = bp; + ptrace_put_breakpoints(task); thread->dabr = data; return 0; } @@ -965,9 +972,12 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, ptrace_triggered, task); if (IS_ERR(bp)) { thread->ptrace_bps[0] = NULL; + ptrace_put_breakpoints(task); return PTR_ERR(bp); } + ptrace_put_breakpoints(task); + #endif /* CONFIG_HAVE_HW_BREAKPOINT */ /* Move contents to the DABR register */ diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 375480c56eb..f33acfd872a 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -229,6 +229,9 @@ static u64 scan_dispatch_log(u64 stop_tb) u64 stolen = 0; u64 dtb; + if (!dtl) + return 0; + if (i == vpa->dtl_idx) return 0; while (i < vpa->dtl_idx) { diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c index 188272934cf..104faa8aa23 100644 --- a/arch/powerpc/platforms/83xx/suspend.c +++ b/arch/powerpc/platforms/83xx/suspend.c @@ -318,17 +318,20 @@ static const struct platform_suspend_ops mpc83xx_suspend_ops = { .end = mpc83xx_suspend_end, }; +static struct of_device_id pmc_match[]; static int pmc_probe(struct platform_device *ofdev) { + const struct of_device_id *match; struct device_node *np = ofdev->dev.of_node; struct resource res; struct pmc_type *type; int ret = 0; - if (!ofdev->dev.of_match) + match = of_match_device(pmc_match, &ofdev->dev); + if (!match) return -EINVAL; - type = ofdev->dev.of_match->data; + type = match->data; if (!of_device_is_available(np)) return -ENODEV; diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index a830c5e8065..bc5f0dc6ae1 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -842,6 +842,7 @@ static void __devinit smp_core99_setup_cpu(int cpu_nr) mpic_setup_this_cpu(); } +#ifdef CONFIG_PPC64 #ifdef CONFIG_HOTPLUG_CPU static int smp_core99_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) @@ -879,7 +880,6 @@ static struct notifier_block __cpuinitdata smp_core99_cpu_nb = { static void __init smp_core99_bringup_done(void) { -#ifdef CONFIG_PPC64 extern void g5_phy_disable_cpu1(void); /* Close i2c bus if it was used for tb sync */ @@ -894,14 +894,14 @@ static void __init smp_core99_bringup_done(void) set_cpu_present(1, false); g5_phy_disable_cpu1(); } -#endif /* CONFIG_PPC64 */ - #ifdef CONFIG_HOTPLUG_CPU register_cpu_notifier(&smp_core99_cpu_nb); #endif + if (ppc_md.progress) ppc_md.progress("smp_core99_bringup_done", 0x349); } +#endif /* CONFIG_PPC64 */ #ifdef CONFIG_HOTPLUG_CPU @@ -975,7 +975,9 @@ static void pmac_cpu_die(void) struct smp_ops_t core99_smp_ops = { .message_pass = smp_mpic_message_pass, .probe = smp_core99_probe, +#ifdef CONFIG_PPC64 .bringup_done = smp_core99_bringup_done, +#endif .kick_cpu = smp_core99_kick_cpu, .setup_cpu = smp_core99_setup_cpu, .give_timebase = smp_core99_give_timebase, diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 00072414908..6c42cfde841 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -287,14 +287,22 @@ static int alloc_dispatch_logs(void) int cpu, ret; struct paca_struct *pp; struct dtl_entry *dtl; + struct kmem_cache *dtl_cache; if (!firmware_has_feature(FW_FEATURE_SPLPAR)) return 0; + dtl_cache = kmem_cache_create("dtl", DISPATCH_LOG_BYTES, + DISPATCH_LOG_BYTES, 0, NULL); + if (!dtl_cache) { + pr_warn("Failed to create dispatch trace log buffer cache\n"); + pr_warn("Stolen time statistics will be unreliable\n"); + return 0; + } + for_each_possible_cpu(cpu) { pp = &paca[cpu]; - dtl = kmalloc_node(DISPATCH_LOG_BYTES, GFP_KERNEL, - cpu_to_node(cpu)); + dtl = kmem_cache_alloc(dtl_cache, GFP_KERNEL); if (!dtl) { pr_warn("Failed to allocate dispatch trace log for cpu %d\n", cpu); diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c index d5679dc1e20..01cd2f08951 100644 --- a/arch/powerpc/sysdev/fsl_msi.c +++ b/arch/powerpc/sysdev/fsl_msi.c @@ -304,8 +304,10 @@ static int __devinit fsl_msi_setup_hwirq(struct fsl_msi *msi, return 0; } +static const struct of_device_id fsl_of_msi_ids[]; static int __devinit fsl_of_msi_probe(struct platform_device *dev) { + const struct of_device_id *match; struct fsl_msi *msi; struct resource res; int err, i, j, irq_index, count; @@ -316,9 +318,10 @@ static int __devinit fsl_of_msi_probe(struct platform_device *dev) u32 offset; static const u32 all_avail[] = { 0, NR_MSI_IRQS }; - if (!dev->dev.of_match) + match = of_match_device(fsl_of_msi_ids, &dev->dev); + if (!match) return -EINVAL; - features = dev->dev.of_match->data; + features = match->data; printk(KERN_DEBUG "Setting up Freescale MSI support\n"); diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index f8f7f28c634..68ca9290df9 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -324,6 +324,11 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary) struct resource rsrc; const int *bus_range; + if (!of_device_is_available(dev)) { + pr_warning("%s: disabled\n", dev->full_name); + return -ENODEV; + } + pr_debug("Adding PCI host bridge %s\n", dev->full_name); /* Fetch host bridge registers address */ diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 14232d57369..49798532b47 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -1457,7 +1457,6 @@ int fsl_rio_setup(struct platform_device *dev) port->ops = ops; port->priv = priv; port->phys_efptr = 0x100; - rio_register_mport(port); priv->regs_win = ioremap(regs.start, regs.end - regs.start + 1); rio_regs_win = priv->regs_win; @@ -1504,6 +1503,9 @@ int fsl_rio_setup(struct platform_device *dev) dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n", port->sys_size ? 65536 : 256); + if (rio_register_mport(port)) + goto err; + if (port->host_deviceid >= 0) out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST | RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED); diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c index 975e3ab13cb..8b16c479585 100644 --- a/arch/s390/crypto/prng.c +++ b/arch/s390/crypto/prng.c @@ -76,7 +76,7 @@ static void prng_seed(int nbytes) /* Add the entropy */ while (nbytes >= 8) { - *((__u64 *)parm_block) ^= *((__u64 *)buf+i*8); + *((__u64 *)parm_block) ^= *((__u64 *)(buf+i)); prng_add_entropy(); i += 8; nbytes -= 8; diff --git a/arch/s390/include/asm/cacheflush.h b/arch/s390/include/asm/cacheflush.h index 43a5c78046d..3e20383d092 100644 --- a/arch/s390/include/asm/cacheflush.h +++ b/arch/s390/include/asm/cacheflush.h @@ -11,5 +11,6 @@ void kernel_map_pages(struct page *page, int numpages, int enable); int set_memory_ro(unsigned long addr, int numpages); int set_memory_rw(unsigned long addr, int numpages); int set_memory_nx(unsigned long addr, int numpages); +int set_memory_x(unsigned long addr, int numpages); #endif /* _S390_CACHEFLUSH_H */ diff --git a/arch/s390/include/asm/diag.h b/arch/s390/include/asm/diag.h index 72b2e2f2d32..7e91c58072e 100644 --- a/arch/s390/include/asm/diag.h +++ b/arch/s390/include/asm/diag.h @@ -9,9 +9,22 @@ #define _ASM_S390_DIAG_H /* - * Diagnose 10: Release pages + * Diagnose 10: Release page range */ -extern void diag10(unsigned long addr); +static inline void diag10_range(unsigned long start_pfn, unsigned long num_pfn) +{ + unsigned long start_addr, end_addr; + + start_addr = start_pfn << PAGE_SHIFT; + end_addr = (start_pfn + num_pfn - 1) << PAGE_SHIFT; + + asm volatile( + "0: diag %0,%1,0x10\n" + "1:\n" + EX_TABLE(0b, 1b) + EX_TABLE(1b, 1b) + : : "a" (start_addr), "a" (end_addr)); +} /* * Diagnose 14: Input spool file manipulation diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h index a6f0e7cc9cd..8c277caa8d3 100644 --- a/arch/s390/include/asm/mmu_context.h +++ b/arch/s390/include/asm/mmu_context.h @@ -23,7 +23,7 @@ static inline int init_new_context(struct task_struct *tsk, #ifdef CONFIG_64BIT mm->context.asce_bits |= _ASCE_TYPE_REGION3; #endif - if (current->mm->context.alloc_pgste) { + if (current->mm && current->mm->context.alloc_pgste) { /* * alloc_pgste indicates, that any NEW context will be created * with extended page tables. The old context is unchanged. The diff --git a/arch/s390/kernel/diag.c b/arch/s390/kernel/diag.c index c032d11da8a..8237fc07ac7 100644 --- a/arch/s390/kernel/diag.c +++ b/arch/s390/kernel/diag.c @@ -9,27 +9,6 @@ #include <asm/diag.h> /* - * Diagnose 10: Release pages - */ -void diag10(unsigned long addr) -{ - if (addr >= 0x7ff00000) - return; - asm volatile( -#ifdef CONFIG_64BIT - " sam31\n" - " diag %0,%0,0x10\n" - "0: sam64\n" -#else - " diag %0,%0,0x10\n" - "0:\n" -#endif - EX_TABLE(0b, 0b) - : : "a" (addr)); -} -EXPORT_SYMBOL(diag10); - -/* * Diagnose 14: Input spool file manipulation */ int diag14(unsigned long rx, unsigned long ry1, unsigned long subcode) diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c index c83726c9fe0..3d4a78fc1ad 100644 --- a/arch/s390/kernel/dis.c +++ b/arch/s390/kernel/dis.c @@ -672,6 +672,7 @@ static struct insn opcode_b2[] = { { "rp", 0x77, INSTR_S_RD }, { "stcke", 0x78, INSTR_S_RD }, { "sacf", 0x79, INSTR_S_RD }, + { "spp", 0x80, INSTR_S_RD }, { "stsi", 0x7d, INSTR_S_RD }, { "srnm", 0x99, INSTR_S_RD }, { "stfpc", 0x9c, INSTR_S_RD }, diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 648f64239a9..1b67fc6ebdc 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -836,7 +836,7 @@ restart_base: stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on basr %r14,0 l %r14,restart_addr-.(%r14) - br %r14 # branch to start_secondary + basr %r14,%r14 # branch to start_secondary restart_addr: .long start_secondary .align 8 diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 9d3603d6c51..9fd86456349 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -841,7 +841,7 @@ restart_base: mvc __LC_SYSTEM_TIMER(8),__TI_system_timer(%r1) xc __LC_STEAL_TIMER(8),__LC_STEAL_TIMER stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on - jg start_secondary + brasl %r14,start_secondary .align 8 restart_vtime: .long 0x7fffffff,0xffffffff diff --git a/arch/s390/kvm/sie64a.S b/arch/s390/kvm/sie64a.S index 7e9d30d567b..ab0e041ac54 100644 --- a/arch/s390/kvm/sie64a.S +++ b/arch/s390/kvm/sie64a.S @@ -48,10 +48,10 @@ sie_irq_handler: tm __TI_flags+7(%r2),_TIF_EXIT_SIE jz 0f larl %r2,sie_exit # work pending, leave sie - stg %r2,__LC_RETURN_PSW+8 + stg %r2,SPI_PSW+8(0,%r15) br %r14 0: larl %r2,sie_reenter # re-enter with guest id - stg %r2,__LC_RETURN_PSW+8 + stg %r2,SPI_PSW+8(0,%r15) 1: br %r14 /* diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c index c66ffd8dbbb..1f1dba9dcf5 100644 --- a/arch/s390/mm/cmm.c +++ b/arch/s390/mm/cmm.c @@ -91,7 +91,7 @@ static long cmm_alloc_pages(long nr, long *counter, } else free_page((unsigned long) npa); } - diag10(addr); + diag10_range(addr >> PAGE_SHIFT, 1); pa->pages[pa->index++] = addr; (*counter)++; spin_unlock(&cmm_lock); diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 9217e332b11..ab988135e5c 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -543,7 +543,6 @@ static void pfault_interrupt(unsigned int ext_int_code, struct task_struct *tsk; __u16 subcode; - kstat_cpu(smp_processor_id()).irqs[EXTINT_PFL]++; /* * Get the external interruption subcode & pfault * initial/completion signal bit. VM stores this @@ -553,14 +552,15 @@ static void pfault_interrupt(unsigned int ext_int_code, subcode = ext_int_code >> 16; if ((subcode & 0xff00) != __SUBCODE_MASK) return; + kstat_cpu(smp_processor_id()).irqs[EXTINT_PFL]++; /* * Get the token (= address of the task structure of the affected task). */ #ifdef CONFIG_64BIT - tsk = *(struct task_struct **) param64; + tsk = (struct task_struct *) param64; #else - tsk = *(struct task_struct **) param32; + tsk = (struct task_struct *) param32; #endif if (subcode & 0x0080) { diff --git a/arch/s390/mm/pageattr.c b/arch/s390/mm/pageattr.c index 122ffbd08ce..f05edcc3bef 100644 --- a/arch/s390/mm/pageattr.c +++ b/arch/s390/mm/pageattr.c @@ -24,12 +24,13 @@ static void change_page_attr(unsigned long addr, int numpages, WARN_ON_ONCE(1); continue; } - ptep = pte_offset_kernel(pmdp, addr + i * PAGE_SIZE); + ptep = pte_offset_kernel(pmdp, addr); pte = *ptep; pte = set(pte); - ptep_invalidate(&init_mm, addr + i * PAGE_SIZE, ptep); + ptep_invalidate(&init_mm, addr, ptep); *ptep = pte; + addr += PAGE_SIZE; } } @@ -53,3 +54,8 @@ int set_memory_nx(unsigned long addr, int numpages) return 0; } EXPORT_SYMBOL_GPL(set_memory_nx); + +int set_memory_x(unsigned long addr, int numpages) +{ + return 0; +} diff --git a/arch/s390/oprofile/hwsampler.c b/arch/s390/oprofile/hwsampler.c index 4952872d6f0..33cbd373cce 100644 --- a/arch/s390/oprofile/hwsampler.c +++ b/arch/s390/oprofile/hwsampler.c @@ -1021,20 +1021,14 @@ deallocate_exit: return rc; } -long hwsampler_query_min_interval(void) +unsigned long hwsampler_query_min_interval(void) { - if (min_sampler_rate) - return min_sampler_rate; - else - return -EINVAL; + return min_sampler_rate; } -long hwsampler_query_max_interval(void) +unsigned long hwsampler_query_max_interval(void) { - if (max_sampler_rate) - return max_sampler_rate; - else - return -EINVAL; + return max_sampler_rate; } unsigned long hwsampler_get_sample_overflow_count(unsigned int cpu) diff --git a/arch/s390/oprofile/hwsampler.h b/arch/s390/oprofile/hwsampler.h index 8c72b59316b..1912f3bb190 100644 --- a/arch/s390/oprofile/hwsampler.h +++ b/arch/s390/oprofile/hwsampler.h @@ -102,8 +102,8 @@ int hwsampler_setup(void); int hwsampler_shutdown(void); int hwsampler_allocate(unsigned long sdbt, unsigned long sdb); int hwsampler_deallocate(void); -long hwsampler_query_min_interval(void); -long hwsampler_query_max_interval(void); +unsigned long hwsampler_query_min_interval(void); +unsigned long hwsampler_query_max_interval(void); int hwsampler_start_all(unsigned long interval); int hwsampler_stop_all(void); int hwsampler_deactivate(unsigned int cpu); diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c index c63d7e58352..5995e9bc72d 100644 --- a/arch/s390/oprofile/init.c +++ b/arch/s390/oprofile/init.c @@ -145,15 +145,11 @@ static int oprofile_hwsampler_init(struct oprofile_operations *ops) * create hwsampler files only if hwsampler_setup() succeeds. */ oprofile_min_interval = hwsampler_query_min_interval(); - if (oprofile_min_interval < 0) { - oprofile_min_interval = 0; + if (oprofile_min_interval == 0) return -ENODEV; - } oprofile_max_interval = hwsampler_query_max_interval(); - if (oprofile_max_interval < 0) { - oprofile_max_interval = 0; + if (oprofile_max_interval == 0) return -ENODEV; - } if (oprofile_timer_init(ops)) return -ENODEV; diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c index 2130ca674e9..3d7b209b217 100644 --- a/arch/sh/kernel/ptrace_32.c +++ b/arch/sh/kernel/ptrace_32.c @@ -117,7 +117,11 @@ void user_enable_single_step(struct task_struct *child) set_tsk_thread_flag(child, TIF_SINGLESTEP); + if (ptrace_get_breakpoints(child) < 0) + return; + set_single_step(child, pc); + ptrace_put_breakpoints(child); } void user_disable_single_step(struct task_struct *child) diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c index f679c57644d..1e34f29e58b 100644 --- a/arch/sparc/kernel/apc.c +++ b/arch/sparc/kernel/apc.c @@ -165,7 +165,7 @@ static int __devinit apc_probe(struct platform_device *op) return 0; } -static struct of_device_id __initdata apc_match[] = { +static struct of_device_id apc_match[] = { { .name = APC_OBPNAME, }, diff --git a/arch/sparc/kernel/pci_sabre.c b/arch/sparc/kernel/pci_sabre.c index 948068a083f..d1840dbdaa2 100644 --- a/arch/sparc/kernel/pci_sabre.c +++ b/arch/sparc/kernel/pci_sabre.c @@ -452,8 +452,10 @@ static void __devinit sabre_pbm_init(struct pci_pbm_info *pbm, sabre_scan_bus(pbm, &op->dev); } +static const struct of_device_id sabre_match[]; static int __devinit sabre_probe(struct platform_device *op) { + const struct of_device_id *match; const struct linux_prom64_registers *pr_regs; struct device_node *dp = op->dev.of_node; struct pci_pbm_info *pbm; @@ -463,7 +465,8 @@ static int __devinit sabre_probe(struct platform_device *op) const u32 *vdma; u64 clear_irq; - hummingbird_p = op->dev.of_match && (op->dev.of_match->data != NULL); + match = of_match_device(sabre_match, &op->dev); + hummingbird_p = match && (match->data != NULL); if (!hummingbird_p) { struct device_node *cpu_dp; diff --git a/arch/sparc/kernel/pci_schizo.c b/arch/sparc/kernel/pci_schizo.c index fecfcb2063c..283fbc329a4 100644 --- a/arch/sparc/kernel/pci_schizo.c +++ b/arch/sparc/kernel/pci_schizo.c @@ -1458,11 +1458,15 @@ out_err: return err; } +static const struct of_device_id schizo_match[]; static int __devinit schizo_probe(struct platform_device *op) { - if (!op->dev.of_match) + const struct of_device_id *match; + + match = of_match_device(schizo_match, &op->dev); + if (!match) return -EINVAL; - return __schizo_init(op, (unsigned long) op->dev.of_match->data); + return __schizo_init(op, (unsigned long)match->data); } /* The ordering of this table is very important. Some Tomatillo diff --git a/arch/sparc/kernel/pmc.c b/arch/sparc/kernel/pmc.c index 93d7b4465f8..6a585d39358 100644 --- a/arch/sparc/kernel/pmc.c +++ b/arch/sparc/kernel/pmc.c @@ -69,7 +69,7 @@ static int __devinit pmc_probe(struct platform_device *op) return 0; } -static struct of_device_id __initdata pmc_match[] = { +static struct of_device_id pmc_match[] = { { .name = PMC_OBPNAME, }, diff --git a/arch/sparc/kernel/smp_32.c b/arch/sparc/kernel/smp_32.c index 91c10fb7085..850a1360c0d 100644 --- a/arch/sparc/kernel/smp_32.c +++ b/arch/sparc/kernel/smp_32.c @@ -53,6 +53,7 @@ cpumask_t smp_commenced_mask = CPU_MASK_NONE; void __cpuinit smp_store_cpu_info(int id) { int cpu_node; + int mid; cpu_data(id).udelay_val = loops_per_jiffy; @@ -60,10 +61,13 @@ void __cpuinit smp_store_cpu_info(int id) cpu_data(id).clock_tick = prom_getintdefault(cpu_node, "clock-frequency", 0); cpu_data(id).prom_node = cpu_node; - cpu_data(id).mid = cpu_get_hwmid(cpu_node); + mid = cpu_get_hwmid(cpu_node); - if (cpu_data(id).mid < 0) - panic("No MID found for CPU%d at node 0x%08d", id, cpu_node); + if (mid < 0) { + printk(KERN_NOTICE "No MID found for CPU%d at node 0x%08d", id, cpu_node); + mid = 0; + } + cpu_data(id).mid = mid; } void __init smp_cpus_done(unsigned int max_cpus) diff --git a/arch/sparc/kernel/time_32.c b/arch/sparc/kernel/time_32.c index 4e236391b63..96046a4024c 100644 --- a/arch/sparc/kernel/time_32.c +++ b/arch/sparc/kernel/time_32.c @@ -168,7 +168,7 @@ static int __devinit clock_probe(struct platform_device *op) return 0; } -static struct of_device_id __initdata clock_match[] = { +static struct of_device_id clock_match[] = { { .name = "eeprom", }, diff --git a/arch/sparc/lib/checksum_32.S b/arch/sparc/lib/checksum_32.S index 3632cb34e91..0084c3361e1 100644 --- a/arch/sparc/lib/checksum_32.S +++ b/arch/sparc/lib/checksum_32.S @@ -289,10 +289,16 @@ cc_end_cruft: /* Also, handle the alignment code out of band. */ cc_dword_align: - cmp %g1, 6 - bl,a ccte + cmp %g1, 16 + bge 1f + srl %g1, 1, %o3 +2: cmp %o3, 0 + be,a ccte andcc %g1, 0xf, %o3 - andcc %o0, 0x1, %g0 + andcc %o3, %o0, %g0 ! Check %o0 only (%o1 has the same last 2 bits) + be,a 2b + srl %o3, 1, %o3 +1: andcc %o0, 0x1, %g0 bne ccslow andcc %o0, 0x2, %g0 be 1f diff --git a/arch/um/Kconfig.um b/arch/um/Kconfig.um index 90a438acbfa..b5e675e370c 100644 --- a/arch/um/Kconfig.um +++ b/arch/um/Kconfig.um @@ -47,7 +47,7 @@ config HOSTFS config HPPFS tristate "HoneyPot ProcFS (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on EXPERIMENTAL && PROC_FS help hppfs (HoneyPot ProcFS) is a filesystem which allows UML /proc entries to be overridden, removed, or fabricated from the host. diff --git a/arch/um/Kconfig.x86 b/arch/um/Kconfig.x86 index 02fb017fed4..a9da516a527 100644 --- a/arch/um/Kconfig.x86 +++ b/arch/um/Kconfig.x86 @@ -4,6 +4,10 @@ menu "UML-specific options" menu "Host processor type and features" +config CMPXCHG_LOCAL + bool + default n + source "arch/x86/Kconfig.cpu" endmenu diff --git a/arch/um/include/asm/bug.h b/arch/um/include/asm/bug.h new file mode 100644 index 00000000000..9e33b864c35 --- /dev/null +++ b/arch/um/include/asm/bug.h @@ -0,0 +1,6 @@ +#ifndef __UM_BUG_H +#define __UM_BUG_H + +#include <asm-generic/bug.h> + +#endif diff --git a/arch/um/include/asm/thread_info.h b/arch/um/include/asm/thread_info.h index e2cf786bda0..5bd1bad33fa 100644 --- a/arch/um/include/asm/thread_info.h +++ b/arch/um/include/asm/thread_info.h @@ -49,7 +49,10 @@ static inline struct thread_info *current_thread_info(void) { struct thread_info *ti; unsigned long mask = THREAD_SIZE - 1; - ti = (struct thread_info *) (((unsigned long) &ti) & ~mask); + void *p; + + asm volatile ("" : "=r" (p) : "0" (&ti)); + ti = (struct thread_info *) (((unsigned long)p) & ~mask); return ti; } diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c index 6ea77979531..42827cafa6a 100644 --- a/arch/um/os-Linux/util.c +++ b/arch/um/os-Linux/util.c @@ -5,6 +5,7 @@ #include <stdio.h> #include <stdlib.h> +#include <unistd.h> #include <errno.h> #include <signal.h> #include <string.h> @@ -75,6 +76,26 @@ void setup_hostinfo(char *buf, int len) host.release, host.version, host.machine); } +/* + * We cannot use glibc's abort(). It makes use of tgkill() which + * has no effect within UML's kernel threads. + * After that glibc would execute an invalid instruction to kill + * the calling process and UML crashes with SIGSEGV. + */ +static inline void __attribute__ ((noreturn)) uml_abort(void) +{ + sigset_t sig; + + fflush(NULL); + + if (!sigemptyset(&sig) && !sigaddset(&sig, SIGABRT)) + sigprocmask(SIG_UNBLOCK, &sig, 0); + + for (;;) + if (kill(getpid(), SIGABRT) < 0) + exit(127); +} + void os_dump_core(void) { int pid; @@ -116,5 +137,5 @@ void os_dump_core(void) while ((pid = waitpid(-1, NULL, WNOHANG | __WALL)) > 0) os_kill_ptraced_process(pid, 0); - abort(); + uml_abort(); } diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile index 804b28dd032..b1da91c1b20 100644 --- a/arch/um/sys-i386/Makefile +++ b/arch/um/sys-i386/Makefile @@ -4,7 +4,7 @@ obj-y = bug.o bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \ ptrace_user.o setjmp.o signal.o stub.o stub_segv.o syscalls.o sysrq.o \ - sys_call_table.o tls.o + sys_call_table.o tls.o atomic64_cx8_32.o obj-$(CONFIG_BINFMT_ELF) += elfcore.o diff --git a/arch/um/sys-i386/atomic64_cx8_32.S b/arch/um/sys-i386/atomic64_cx8_32.S new file mode 100644 index 00000000000..1e901d3d4a9 --- /dev/null +++ b/arch/um/sys-i386/atomic64_cx8_32.S @@ -0,0 +1,225 @@ +/* + * atomic64_t for 586+ + * + * Copied from arch/x86/lib/atomic64_cx8_32.S + * + * Copyright © 2010 Luca Barbieri + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/linkage.h> +#include <asm/alternative-asm.h> +#include <asm/dwarf2.h> + +.macro SAVE reg + pushl_cfi %\reg + CFI_REL_OFFSET \reg, 0 +.endm + +.macro RESTORE reg + popl_cfi %\reg + CFI_RESTORE \reg +.endm + +.macro read64 reg + movl %ebx, %eax + movl %ecx, %edx +/* we need LOCK_PREFIX since otherwise cmpxchg8b always does the write */ + LOCK_PREFIX + cmpxchg8b (\reg) +.endm + +ENTRY(atomic64_read_cx8) + CFI_STARTPROC + + read64 %ecx + ret + CFI_ENDPROC +ENDPROC(atomic64_read_cx8) + +ENTRY(atomic64_set_cx8) + CFI_STARTPROC + +1: +/* we don't need LOCK_PREFIX since aligned 64-bit writes + * are atomic on 586 and newer */ + cmpxchg8b (%esi) + jne 1b + + ret + CFI_ENDPROC +ENDPROC(atomic64_set_cx8) + +ENTRY(atomic64_xchg_cx8) + CFI_STARTPROC + + movl %ebx, %eax + movl %ecx, %edx +1: + LOCK_PREFIX + cmpxchg8b (%esi) + jne 1b + + ret + CFI_ENDPROC +ENDPROC(atomic64_xchg_cx8) + +.macro addsub_return func ins insc +ENTRY(atomic64_\func\()_return_cx8) + CFI_STARTPROC + SAVE ebp + SAVE ebx + SAVE esi + SAVE edi + + movl %eax, %esi + movl %edx, %edi + movl %ecx, %ebp + + read64 %ebp +1: + movl %eax, %ebx + movl %edx, %ecx + \ins\()l %esi, %ebx + \insc\()l %edi, %ecx + LOCK_PREFIX + cmpxchg8b (%ebp) + jne 1b + +10: + movl %ebx, %eax + movl %ecx, %edx + RESTORE edi + RESTORE esi + RESTORE ebx + RESTORE ebp + ret + CFI_ENDPROC +ENDPROC(atomic64_\func\()_return_cx8) +.endm + +addsub_return add add adc +addsub_return sub sub sbb + +.macro incdec_return func ins insc +ENTRY(atomic64_\func\()_return_cx8) + CFI_STARTPROC + SAVE ebx + + read64 %esi +1: + movl %eax, %ebx + movl %edx, %ecx + \ins\()l $1, %ebx + \insc\()l $0, %ecx + LOCK_PREFIX + cmpxchg8b (%esi) + jne 1b + +10: + movl %ebx, %eax + movl %ecx, %edx + RESTORE ebx + ret + CFI_ENDPROC +ENDPROC(atomic64_\func\()_return_cx8) +.endm + +incdec_return inc add adc +incdec_return dec sub sbb + +ENTRY(atomic64_dec_if_positive_cx8) + CFI_STARTPROC + SAVE ebx + + read64 %esi +1: + movl %eax, %ebx + movl %edx, %ecx + subl $1, %ebx + sbb $0, %ecx + js 2f + LOCK_PREFIX + cmpxchg8b (%esi) + jne 1b + +2: + movl %ebx, %eax + movl %ecx, %edx + RESTORE ebx + ret + CFI_ENDPROC +ENDPROC(atomic64_dec_if_positive_cx8) + +ENTRY(atomic64_add_unless_cx8) + CFI_STARTPROC + SAVE ebp + SAVE ebx +/* these just push these two parameters on the stack */ + SAVE edi + SAVE esi + + movl %ecx, %ebp + movl %eax, %esi + movl %edx, %edi + + read64 %ebp +1: + cmpl %eax, 0(%esp) + je 4f +2: + movl %eax, %ebx + movl %edx, %ecx + addl %esi, %ebx + adcl %edi, %ecx + LOCK_PREFIX + cmpxchg8b (%ebp) + jne 1b + + movl $1, %eax +3: + addl $8, %esp + CFI_ADJUST_CFA_OFFSET -8 + RESTORE ebx + RESTORE ebp + ret +4: + cmpl %edx, 4(%esp) + jne 2b + xorl %eax, %eax + jmp 3b + CFI_ENDPROC +ENDPROC(atomic64_add_unless_cx8) + +ENTRY(atomic64_inc_not_zero_cx8) + CFI_STARTPROC + SAVE ebx + + read64 %esi +1: + testl %eax, %eax + je 4f +2: + movl %eax, %ebx + movl %edx, %ecx + addl $1, %ebx + adcl $0, %ecx + LOCK_PREFIX + cmpxchg8b (%esi) + jne 1b + + movl $1, %eax +3: + RESTORE ebx + ret +4: + testl %edx, %edx + jne 2b + jmp 3b + CFI_ENDPROC +ENDPROC(atomic64_inc_not_zero_cx8) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index cc6c53a95bf..e7f94a52a5d 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1848,7 +1848,7 @@ config APM_ALLOW_INTS endif # APM -source "arch/x86/kernel/cpu/cpufreq/Kconfig" +source "drivers/cpufreq/Kconfig" source "drivers/cpuidle/Kconfig" diff --git a/arch/x86/boot/memory.c b/arch/x86/boot/memory.c index cae3feb1035..db75d07c364 100644 --- a/arch/x86/boot/memory.c +++ b/arch/x86/boot/memory.c @@ -91,7 +91,7 @@ static int detect_memory_e801(void) if (oreg.ax > 15*1024) { return -1; /* Bogus! */ } else if (oreg.ax == 15*1024) { - boot_params.alt_mem_k = (oreg.dx << 6) + oreg.ax; + boot_params.alt_mem_k = (oreg.bx << 6) + oreg.ax; } else { /* * This ignores memory above 16MB if we have a memory diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h index d87988bacf3..34595d5e103 100644 --- a/arch/x86/include/asm/apicdef.h +++ b/arch/x86/include/asm/apicdef.h @@ -78,6 +78,7 @@ #define APIC_DEST_LOGICAL 0x00800 #define APIC_DEST_PHYSICAL 0x00000 #define APIC_DM_FIXED 0x00000 +#define APIC_DM_FIXED_MASK 0x00700 #define APIC_DM_LOWEST 0x00100 #define APIC_DM_SMI 0x00200 #define APIC_DM_REMRD 0x00300 diff --git a/arch/x86/include/asm/gart.h b/arch/x86/include/asm/gart.h index 43085bfc99c..156cd5d18d2 100644 --- a/arch/x86/include/asm/gart.h +++ b/arch/x86/include/asm/gart.h @@ -66,7 +66,7 @@ static inline void gart_set_size_and_enable(struct pci_dev *dev, u32 order) * Don't enable translation but enable GART IO and CPU accesses. * Also, set DISTLBWALKPRB since GART tables memory is UC. */ - ctl = DISTLBWALKPRB | order << 1; + ctl = order << 1; pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); } @@ -75,17 +75,17 @@ static inline void enable_gart_translation(struct pci_dev *dev, u64 addr) { u32 tmp, ctl; - /* address of the mappings table */ - addr >>= 12; - tmp = (u32) addr<<4; - tmp &= ~0xf; - pci_write_config_dword(dev, AMD64_GARTTABLEBASE, tmp); - - /* Enable GART translation for this hammer. */ - pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); - ctl |= GARTEN; - ctl &= ~(DISGARTCPU | DISGARTIO); - pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); + /* address of the mappings table */ + addr >>= 12; + tmp = (u32) addr<<4; + tmp &= ~0xf; + pci_write_config_dword(dev, AMD64_GARTTABLEBASE, tmp); + + /* Enable GART translation for this hammer. */ + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); + ctl |= GARTEN | DISTLBWALKPRB; + ctl &= ~(DISGARTCPU | DISGARTIO); + pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); } static inline int aperture_valid(u64 aper_base, u32 aper_size, u32 min_size) diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index c4bd267dfc5..a97a240f67f 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -150,7 +150,7 @@ void setup_IO_APIC_irq_extra(u32 gsi); extern void ioapic_and_gsi_init(void); extern void ioapic_insert_resources(void); -int io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr); +int io_apic_setup_irq_pin_once(unsigned int irq, int node, struct io_apic_irq_attr *attr); extern struct IO_APIC_route_entry **alloc_ioapic_entries(void); extern void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries); diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index fd5a1f365c9..3cce71413d0 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -96,11 +96,15 @@ #define MSR_IA32_MC0_ADDR 0x00000402 #define MSR_IA32_MC0_MISC 0x00000403 +#define MSR_AMD64_MC0_MASK 0xc0010044 + #define MSR_IA32_MCx_CTL(x) (MSR_IA32_MC0_CTL + 4*(x)) #define MSR_IA32_MCx_STATUS(x) (MSR_IA32_MC0_STATUS + 4*(x)) #define MSR_IA32_MCx_ADDR(x) (MSR_IA32_MC0_ADDR + 4*(x)) #define MSR_IA32_MCx_MISC(x) (MSR_IA32_MC0_MISC + 4*(x)) +#define MSR_AMD64_MCx_MASK(x) (MSR_AMD64_MC0_MASK + (x)) + /* These are consecutive and not in the normal 4er MCE bank block */ #define MSR_IA32_MC0_CTL2 0x00000280 #define MSR_IA32_MCx_CTL2(x) (MSR_IA32_MC0_CTL2 + (x)) diff --git a/arch/x86/include/asm/numa.h b/arch/x86/include/asm/numa.h index 3d4dab43c99..a50fc9f493b 100644 --- a/arch/x86/include/asm/numa.h +++ b/arch/x86/include/asm/numa.h @@ -51,7 +51,7 @@ static inline void numa_remove_cpu(int cpu) { } #endif /* CONFIG_NUMA */ #ifdef CONFIG_DEBUG_PER_CPU_MAPS -struct cpumask __cpuinit *debug_cpumask_set_cpu(int cpu, int enable); +void debug_cpumask_set_cpu(int cpu, int node, bool enable); #endif #endif /* _ASM_X86_NUMA_H */ diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h index 7db7723d1f3..d56187c6b83 100644 --- a/arch/x86/include/asm/pgtable_types.h +++ b/arch/x86/include/asm/pgtable_types.h @@ -299,6 +299,7 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, /* Install a pte for a particular vaddr in kernel space. */ void set_pte_vaddr(unsigned long vaddr, pte_t pte); +extern void native_pagetable_reserve(u64 start, u64 end); #ifdef CONFIG_X86_32 extern void native_pagetable_setup_start(pgd_t *base); extern void native_pagetable_setup_done(pgd_t *base); diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h index 3e094af443c..130f1eeee5f 100644 --- a/arch/x86/include/asm/uv/uv_bau.h +++ b/arch/x86/include/asm/uv/uv_bau.h @@ -94,6 +94,8 @@ /* after this # consecutive successes, bump up the throttle if it was lowered */ #define COMPLETE_THRESHOLD 5 +#define UV_LB_SUBNODEID 0x10 + /* * number of entries in the destination side payload queue */ @@ -124,7 +126,7 @@ * The distribution specification (32 bytes) is interpreted as a 256-bit * distribution vector. Adjacent bits correspond to consecutive even numbered * nodeIDs. The result of adding the index of a given bit to the 15-bit - * 'base_dest_nodeid' field of the header corresponds to the + * 'base_dest_nasid' field of the header corresponds to the * destination nodeID associated with that specified bit. */ struct bau_target_uvhubmask { @@ -176,7 +178,7 @@ struct bau_msg_payload { struct bau_msg_header { unsigned int dest_subnodeid:6; /* must be 0x10, for the LB */ /* bits 5:0 */ - unsigned int base_dest_nodeid:15; /* nasid of the */ + unsigned int base_dest_nasid:15; /* nasid of the */ /* bits 20:6 */ /* first bit in uvhub map */ unsigned int command:8; /* message type */ /* bits 28:21 */ @@ -378,6 +380,10 @@ struct ptc_stats { unsigned long d_rcanceled; /* number of messages canceled by resets */ }; +struct hub_and_pnode { + short uvhub; + short pnode; +}; /* * one per-cpu; to locate the software tables */ @@ -399,10 +405,12 @@ struct bau_control { int baudisabled; int set_bau_off; short cpu; + short osnode; short uvhub_cpu; short uvhub; short cpus_in_socket; short cpus_in_uvhub; + short partition_base_pnode; unsigned short message_number; unsigned short uvhub_quiesce; short socket_acknowledge_count[DEST_Q_SIZE]; @@ -422,15 +430,16 @@ struct bau_control { int congested_period; cycles_t period_time; long period_requests; + struct hub_and_pnode *target_hub_and_pnode; }; static inline int bau_uvhub_isset(int uvhub, struct bau_target_uvhubmask *dstp) { return constant_test_bit(uvhub, &dstp->bits[0]); } -static inline void bau_uvhub_set(int uvhub, struct bau_target_uvhubmask *dstp) +static inline void bau_uvhub_set(int pnode, struct bau_target_uvhubmask *dstp) { - __set_bit(uvhub, &dstp->bits[0]); + __set_bit(pnode, &dstp->bits[0]); } static inline void bau_uvhubs_clear(struct bau_target_uvhubmask *dstp, int nbits) diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h index a501741c233..4298002d0c8 100644 --- a/arch/x86/include/asm/uv/uv_hub.h +++ b/arch/x86/include/asm/uv/uv_hub.h @@ -398,6 +398,8 @@ struct uv_blade_info { unsigned short nr_online_cpus; unsigned short pnode; short memory_nid; + spinlock_t nmi_lock; + unsigned long nmi_count; }; extern struct uv_blade_info *uv_blade_info; extern short *uv_node_to_blade; diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h index 20cafeac745..f5bb64a823d 100644 --- a/arch/x86/include/asm/uv/uv_mmrs.h +++ b/arch/x86/include/asm/uv/uv_mmrs.h @@ -5,7 +5,7 @@ * * SGI UV MMR definitions * - * Copyright (C) 2007-2010 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2007-2011 Silicon Graphics, Inc. All rights reserved. */ #ifndef _ASM_X86_UV_UV_MMRS_H @@ -1099,5 +1099,19 @@ union uvh_rtc1_int_config_u { } s; }; +/* ========================================================================= */ +/* UVH_SCRATCH5 */ +/* ========================================================================= */ +#define UVH_SCRATCH5 0x2d0200UL +#define UVH_SCRATCH5_32 0x00778 + +#define UVH_SCRATCH5_SCRATCH5_SHFT 0 +#define UVH_SCRATCH5_SCRATCH5_MASK 0xffffffffffffffffUL +union uvh_scratch5_u { + unsigned long v; + struct uvh_scratch5_s { + unsigned long scratch5 : 64; /* RW, W1CS */ + } s; +}; #endif /* __ASM_UV_MMRS_X86_H__ */ diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h index 643ebf2e2ad..d3d859035af 100644 --- a/arch/x86/include/asm/x86_init.h +++ b/arch/x86/include/asm/x86_init.h @@ -68,6 +68,17 @@ struct x86_init_oem { }; /** + * struct x86_init_mapping - platform specific initial kernel pagetable setup + * @pagetable_reserve: reserve a range of addresses for kernel pagetable usage + * + * For more details on the purpose of this hook, look in + * init_memory_mapping and the commit that added it. + */ +struct x86_init_mapping { + void (*pagetable_reserve)(u64 start, u64 end); +}; + +/** * struct x86_init_paging - platform specific paging functions * @pagetable_setup_start: platform specific pre paging_init() call * @pagetable_setup_done: platform specific post paging_init() call @@ -123,6 +134,7 @@ struct x86_init_ops { struct x86_init_mpparse mpparse; struct x86_init_irqs irqs; struct x86_init_oem oem; + struct x86_init_mapping mapping; struct x86_init_paging paging; struct x86_init_timers timers; struct x86_init_iommu iommu; diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 86d1ad4962a..73fb469908c 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -499,7 +499,7 @@ out: * Don't enable translation yet but enable GART IO and CPU * accesses and set DISTLBWALKPRB since GART table memory is UC. */ - u32 ctl = DISTLBWALKPRB | aper_order << 1; + u32 ctl = aper_order << 1; bus = amd_nb_bus_dev_ranges[i].bus; dev_base = amd_nb_bus_dev_ranges[i].dev_base; diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 68df09bba92..45fd33d1fd3 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -128,8 +128,8 @@ static int __init parse_noapic(char *str) } early_param("noapic", parse_noapic); -static int io_apic_setup_irq_pin_once(unsigned int irq, int node, - struct io_apic_irq_attr *attr); +static int io_apic_setup_irq_pin(unsigned int irq, int node, + struct io_apic_irq_attr *attr); /* Will be called in mpparse/acpi/sfi codes for saving IRQ info */ void mp_save_irq(struct mpc_intsrc *m) @@ -3570,7 +3570,7 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) } #endif /* CONFIG_HT_IRQ */ -int +static int io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr) { struct irq_cfg *cfg = alloc_irq_and_cfg_at(irq, node); @@ -3585,8 +3585,8 @@ io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr) return ret; } -static int io_apic_setup_irq_pin_once(unsigned int irq, int node, - struct io_apic_irq_attr *attr) +int io_apic_setup_irq_pin_once(unsigned int irq, int node, + struct io_apic_irq_attr *attr) { unsigned int id = attr->ioapic, pin = attr->ioapic_pin; int ret; diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 33b10a0fc09..7acd2d2ac96 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -37,6 +37,13 @@ #include <asm/smp.h> #include <asm/x86_init.h> #include <asm/emergency-restart.h> +#include <asm/nmi.h> + +/* BMC sets a bit this MMR non-zero before sending an NMI */ +#define UVH_NMI_MMR UVH_SCRATCH5 +#define UVH_NMI_MMR_CLEAR (UVH_NMI_MMR + 8) +#define UV_NMI_PENDING_MASK (1UL << 63) +DEFINE_PER_CPU(unsigned long, cpu_last_nmi_count); DEFINE_PER_CPU(int, x2apic_extra_bits); @@ -642,18 +649,46 @@ void __cpuinit uv_cpu_init(void) */ int uv_handle_nmi(struct notifier_block *self, unsigned long reason, void *data) { + unsigned long real_uv_nmi; + int bid; + if (reason != DIE_NMIUNKNOWN) return NOTIFY_OK; if (in_crash_kexec) /* do nothing if entering the crash kernel */ return NOTIFY_OK; + /* - * Use a lock so only one cpu prints at a time - * to prevent intermixed output. + * Each blade has an MMR that indicates when an NMI has been sent + * to cpus on the blade. If an NMI is detected, atomically + * clear the MMR and update a per-blade NMI count used to + * cause each cpu on the blade to notice a new NMI. + */ + bid = uv_numa_blade_id(); + real_uv_nmi = (uv_read_local_mmr(UVH_NMI_MMR) & UV_NMI_PENDING_MASK); + + if (unlikely(real_uv_nmi)) { + spin_lock(&uv_blade_info[bid].nmi_lock); + real_uv_nmi = (uv_read_local_mmr(UVH_NMI_MMR) & UV_NMI_PENDING_MASK); + if (real_uv_nmi) { + uv_blade_info[bid].nmi_count++; + uv_write_local_mmr(UVH_NMI_MMR_CLEAR, UV_NMI_PENDING_MASK); + } + spin_unlock(&uv_blade_info[bid].nmi_lock); + } + + if (likely(__get_cpu_var(cpu_last_nmi_count) == uv_blade_info[bid].nmi_count)) + return NOTIFY_DONE; + + __get_cpu_var(cpu_last_nmi_count) = uv_blade_info[bid].nmi_count; + + /* + * Use a lock so only one cpu prints at a time. + * This prevents intermixed output. */ spin_lock(&uv_nmi_lock); - pr_info("NMI stack dump cpu %u:\n", smp_processor_id()); + pr_info("UV NMI stack dump cpu %u:\n", smp_processor_id()); dump_stack(); spin_unlock(&uv_nmi_lock); @@ -661,7 +696,8 @@ int uv_handle_nmi(struct notifier_block *self, unsigned long reason, void *data) } static struct notifier_block uv_dump_stack_nmi_nb = { - .notifier_call = uv_handle_nmi + .notifier_call = uv_handle_nmi, + .priority = NMI_LOCAL_LOW_PRIOR - 1, }; void uv_register_nmi_notifier(void) @@ -720,8 +756,9 @@ void __init uv_system_init(void) printk(KERN_DEBUG "UV: Found %d blades\n", uv_num_possible_blades()); bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades(); - uv_blade_info = kmalloc(bytes, GFP_KERNEL); + uv_blade_info = kzalloc(bytes, GFP_KERNEL); BUG_ON(!uv_blade_info); + for (blade = 0; blade < uv_num_possible_blades(); blade++) uv_blade_info[blade].memory_nid = -1; @@ -747,6 +784,7 @@ void __init uv_system_init(void) uv_blade_info[blade].pnode = pnode; uv_blade_info[blade].nr_possible_cpus = 0; uv_blade_info[blade].nr_online_cpus = 0; + spin_lock_init(&uv_blade_info[blade].nmi_lock); max_pnode = max(pnode, max_pnode); blade++; } diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index 0b4be431c62..adee12e0da1 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -228,6 +228,7 @@ #include <linux/kthread.h> #include <linux/jiffies.h> #include <linux/acpi.h> +#include <linux/syscore_ops.h> #include <asm/system.h> #include <asm/uaccess.h> @@ -1238,6 +1239,7 @@ static int suspend(int vetoable) local_irq_disable(); sysdev_suspend(PMSG_SUSPEND); + syscore_suspend(); local_irq_enable(); @@ -1255,6 +1257,7 @@ static int suspend(int vetoable) apm_error("suspend", err); err = (err == APM_SUCCESS) ? 0 : -EIO; + syscore_resume(); sysdev_resume(); local_irq_enable(); @@ -1280,6 +1283,7 @@ static void standby(void) local_irq_disable(); sysdev_suspend(PMSG_SUSPEND); + syscore_suspend(); local_irq_enable(); err = set_system_power_state(APM_STATE_STANDBY); @@ -1287,6 +1291,7 @@ static void standby(void) apm_error("standby", err); local_irq_disable(); + syscore_resume(); sysdev_resume(); local_irq_enable(); diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index 3f0ebe429a0..6042981d030 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -30,7 +30,6 @@ obj-$(CONFIG_PERF_EVENTS) += perf_event.o obj-$(CONFIG_X86_MCE) += mcheck/ obj-$(CONFIG_MTRR) += mtrr/ -obj-$(CONFIG_CPU_FREQ) += cpufreq/ obj-$(CONFIG_X86_LOCAL_APIC) += perfctr-watchdog.o diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 3ecece0217e..6f9d1f6063e 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -613,8 +613,27 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) #endif /* As a rule processors have APIC timer running in deep C states */ - if (c->x86 >= 0xf && !cpu_has_amd_erratum(amd_erratum_400)) + if (c->x86 > 0xf && !cpu_has_amd_erratum(amd_erratum_400)) set_cpu_cap(c, X86_FEATURE_ARAT); + + /* + * Disable GART TLB Walk Errors on Fam10h. We do this here + * because this is always needed when GART is enabled, even in a + * kernel which has no MCE support built in. + */ + if (c->x86 == 0x10) { + /* + * BIOS should disable GartTlbWlk Errors themself. If + * it doesn't do it here as suggested by the BKDG. + * + * Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=33012 + */ + u64 mask; + + rdmsrl(MSR_AMD64_MCx_MASK(4), mask); + mask |= (1 << 10); + wrmsrl(MSR_AMD64_MCx_MASK(4), mask); + } } #ifdef CONFIG_X86_32 diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig deleted file mode 100644 index 870e6cc6ad2..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/Kconfig +++ /dev/null @@ -1,266 +0,0 @@ -# -# CPU Frequency scaling -# - -menu "CPU Frequency scaling" - -source "drivers/cpufreq/Kconfig" - -if CPU_FREQ - -comment "CPUFreq processor drivers" - -config X86_PCC_CPUFREQ - tristate "Processor Clocking Control interface driver" - depends on ACPI && ACPI_PROCESSOR - help - This driver adds support for the PCC interface. - - For details, take a look at: - <file:Documentation/cpu-freq/pcc-cpufreq.txt>. - - To compile this driver as a module, choose M here: the - module will be called pcc-cpufreq. - - If in doubt, say N. - -config X86_ACPI_CPUFREQ - tristate "ACPI Processor P-States driver" - select CPU_FREQ_TABLE - depends on ACPI_PROCESSOR - help - This driver adds a CPUFreq driver which utilizes the ACPI - Processor Performance States. - This driver also supports Intel Enhanced Speedstep. - - To compile this driver as a module, choose M here: the - module will be called acpi-cpufreq. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config ELAN_CPUFREQ - tristate "AMD Elan SC400 and SC410" - select CPU_FREQ_TABLE - depends on X86_ELAN - ---help--- - This adds the CPUFreq driver for AMD Elan SC400 and SC410 - processors. - - You need to specify the processor maximum speed as boot - parameter: elanfreq=maxspeed (in kHz) or as module - parameter "max_freq". - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config SC520_CPUFREQ - tristate "AMD Elan SC520" - select CPU_FREQ_TABLE - depends on X86_ELAN - ---help--- - This adds the CPUFreq driver for AMD Elan SC520 processor. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - - -config X86_POWERNOW_K6 - tristate "AMD Mobile K6-2/K6-3 PowerNow!" - select CPU_FREQ_TABLE - depends on X86_32 - help - This adds the CPUFreq driver for mobile AMD K6-2+ and mobile - AMD K6-3+ processors. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_POWERNOW_K7 - tristate "AMD Mobile Athlon/Duron PowerNow!" - select CPU_FREQ_TABLE - depends on X86_32 - help - This adds the CPUFreq driver for mobile AMD K7 mobile processors. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_POWERNOW_K7_ACPI - bool - depends on X86_POWERNOW_K7 && ACPI_PROCESSOR - depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m) - depends on X86_32 - default y - -config X86_POWERNOW_K8 - tristate "AMD Opteron/Athlon64 PowerNow!" - select CPU_FREQ_TABLE - depends on ACPI && ACPI_PROCESSOR - help - This adds the CPUFreq driver for K8/K10 Opteron/Athlon64 processors. - - To compile this driver as a module, choose M here: the - module will be called powernow-k8. - - For details, take a look at <file:Documentation/cpu-freq/>. - -config X86_GX_SUSPMOD - tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" - depends on X86_32 && PCI - help - This add the CPUFreq driver for NatSemi Geode processors which - support suspend modulation. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_SPEEDSTEP_CENTRINO - tristate "Intel Enhanced SpeedStep (deprecated)" - select CPU_FREQ_TABLE - select X86_SPEEDSTEP_CENTRINO_TABLE if X86_32 - depends on X86_32 || (X86_64 && ACPI_PROCESSOR) - help - This is deprecated and this functionality is now merged into - acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of - speedstep_centrino. - This adds the CPUFreq driver for Enhanced SpeedStep enabled - mobile CPUs. This means Intel Pentium M (Centrino) CPUs - or 64bit enabled Intel Xeons. - - To compile this driver as a module, choose M here: the - module will be called speedstep-centrino. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_SPEEDSTEP_CENTRINO_TABLE - bool "Built-in tables for Banias CPUs" - depends on X86_32 && X86_SPEEDSTEP_CENTRINO - default y - help - Use built-in tables for Banias CPUs if ACPI encoding - is not available. - - If in doubt, say N. - -config X86_SPEEDSTEP_ICH - tristate "Intel Speedstep on ICH-M chipsets (ioport interface)" - select CPU_FREQ_TABLE - depends on X86_32 - help - This adds the CPUFreq driver for certain mobile Intel Pentium III - (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all - mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2, - ICH3 or ICH4 southbridge. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_SPEEDSTEP_SMI - tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)" - select CPU_FREQ_TABLE - depends on X86_32 && EXPERIMENTAL - help - This adds the CPUFreq driver for certain mobile Intel Pentium III - (Coppermine), all mobile Intel Pentium III-M (Tualatin) - on systems which have an Intel 440BX/ZX/MX southbridge. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_P4_CLOCKMOD - tristate "Intel Pentium 4 clock modulation" - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for Intel Pentium 4 / XEON - processors. When enabled it will lower CPU temperature by skipping - clocks. - - This driver should be only used in exceptional - circumstances when very low power is needed because it causes severe - slowdowns and noticeable latencies. Normally Speedstep should be used - instead. - - To compile this driver as a module, choose M here: the - module will be called p4-clockmod. - - For details, take a look at <file:Documentation/cpu-freq/>. - - Unless you are absolutely sure say N. - -config X86_CPUFREQ_NFORCE2 - tristate "nVidia nForce2 FSB changing" - depends on X86_32 && EXPERIMENTAL - help - This adds the CPUFreq driver for FSB changing on nVidia nForce2 - platforms. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_LONGRUN - tristate "Transmeta LongRun" - depends on X86_32 - help - This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors - which support LongRun. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_LONGHAUL - tristate "VIA Cyrix III Longhaul" - select CPU_FREQ_TABLE - depends on X86_32 && ACPI_PROCESSOR - help - This adds the CPUFreq driver for VIA Samuel/CyrixIII, - VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T - processors. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_E_POWERSAVER - tristate "VIA C7 Enhanced PowerSaver (DANGEROUS)" - select CPU_FREQ_TABLE - depends on X86_32 && EXPERIMENTAL - help - This adds the CPUFreq driver for VIA C7 processors. However, this driver - does not have any safeguards to prevent operating the CPU out of spec - and is thus considered dangerous. Please use the regular ACPI cpufreq - driver, enabled by CONFIG_X86_ACPI_CPUFREQ. - - If in doubt, say N. - -comment "shared options" - -config X86_SPEEDSTEP_LIB - tristate - default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD) - -config X86_SPEEDSTEP_RELAXED_CAP_CHECK - bool "Relaxed speedstep capability checks" - depends on X86_32 && (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH) - help - Don't perform all checks for a speedstep capable system which would - normally be done. Some ancient or strange systems, though speedstep - capable, don't always indicate that they are speedstep capable. This - option lets the probing code bypass some of those checks if the - parameter "relaxed_check=1" is passed to the module. - -endif # CPU_FREQ - -endmenu diff --git a/arch/x86/kernel/cpu/cpufreq/Makefile b/arch/x86/kernel/cpu/cpufreq/Makefile deleted file mode 100644 index bd54bf67e6f..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# Link order matters. K8 is preferred to ACPI because of firmware bugs in early -# K8 systems. ACPI is preferred to all other hardware-specific drivers. -# speedstep-* is preferred over p4-clockmod. - -obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o mperf.o -obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o mperf.o -obj-$(CONFIG_X86_PCC_CPUFREQ) += pcc-cpufreq.o -obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o -obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o -obj-$(CONFIG_X86_LONGHAUL) += longhaul.o -obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o -obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o -obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o -obj-$(CONFIG_X86_LONGRUN) += longrun.o -obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o -obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o -obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o -obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o -obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o -obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o -obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c deleted file mode 100644 index a2baafb2fe6..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ /dev/null @@ -1,776 +0,0 @@ -/* - * acpi-cpufreq.c - ACPI Processor P-States Driver - * - * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> - * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> - * Copyright (C) 2002 - 2004 Dominik Brodowski <linux@brodo.de> - * Copyright (C) 2006 Denis Sadykov <denis.m.sadykov@intel.com> - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/sched.h> -#include <linux/cpufreq.h> -#include <linux/compiler.h> -#include <linux/dmi.h> -#include <linux/slab.h> - -#include <linux/acpi.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/uaccess.h> - -#include <acpi/processor.h> - -#include <asm/msr.h> -#include <asm/processor.h> -#include <asm/cpufeature.h> -#include "mperf.h" - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "acpi-cpufreq", msg) - -MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski"); -MODULE_DESCRIPTION("ACPI Processor P-States Driver"); -MODULE_LICENSE("GPL"); - -enum { - UNDEFINED_CAPABLE = 0, - SYSTEM_INTEL_MSR_CAPABLE, - SYSTEM_IO_CAPABLE, -}; - -#define INTEL_MSR_RANGE (0xffff) - -struct acpi_cpufreq_data { - struct acpi_processor_performance *acpi_data; - struct cpufreq_frequency_table *freq_table; - unsigned int resume; - unsigned int cpu_feature; -}; - -static DEFINE_PER_CPU(struct acpi_cpufreq_data *, acfreq_data); - -/* acpi_perf_data is a pointer to percpu data. */ -static struct acpi_processor_performance __percpu *acpi_perf_data; - -static struct cpufreq_driver acpi_cpufreq_driver; - -static unsigned int acpi_pstate_strict; - -static int check_est_cpu(unsigned int cpuid) -{ - struct cpuinfo_x86 *cpu = &cpu_data(cpuid); - - return cpu_has(cpu, X86_FEATURE_EST); -} - -static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data) -{ - struct acpi_processor_performance *perf; - int i; - - perf = data->acpi_data; - - for (i = 0; i < perf->state_count; i++) { - if (value == perf->states[i].status) - return data->freq_table[i].frequency; - } - return 0; -} - -static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data) -{ - int i; - struct acpi_processor_performance *perf; - - msr &= INTEL_MSR_RANGE; - perf = data->acpi_data; - - for (i = 0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) { - if (msr == perf->states[data->freq_table[i].index].status) - return data->freq_table[i].frequency; - } - return data->freq_table[0].frequency; -} - -static unsigned extract_freq(u32 val, struct acpi_cpufreq_data *data) -{ - switch (data->cpu_feature) { - case SYSTEM_INTEL_MSR_CAPABLE: - return extract_msr(val, data); - case SYSTEM_IO_CAPABLE: - return extract_io(val, data); - default: - return 0; - } -} - -struct msr_addr { - u32 reg; -}; - -struct io_addr { - u16 port; - u8 bit_width; -}; - -struct drv_cmd { - unsigned int type; - const struct cpumask *mask; - union { - struct msr_addr msr; - struct io_addr io; - } addr; - u32 val; -}; - -/* Called via smp_call_function_single(), on the target CPU */ -static void do_drv_read(void *_cmd) -{ - struct drv_cmd *cmd = _cmd; - u32 h; - - switch (cmd->type) { - case SYSTEM_INTEL_MSR_CAPABLE: - rdmsr(cmd->addr.msr.reg, cmd->val, h); - break; - case SYSTEM_IO_CAPABLE: - acpi_os_read_port((acpi_io_address)cmd->addr.io.port, - &cmd->val, - (u32)cmd->addr.io.bit_width); - break; - default: - break; - } -} - -/* Called via smp_call_function_many(), on the target CPUs */ -static void do_drv_write(void *_cmd) -{ - struct drv_cmd *cmd = _cmd; - u32 lo, hi; - - switch (cmd->type) { - case SYSTEM_INTEL_MSR_CAPABLE: - rdmsr(cmd->addr.msr.reg, lo, hi); - lo = (lo & ~INTEL_MSR_RANGE) | (cmd->val & INTEL_MSR_RANGE); - wrmsr(cmd->addr.msr.reg, lo, hi); - break; - case SYSTEM_IO_CAPABLE: - acpi_os_write_port((acpi_io_address)cmd->addr.io.port, - cmd->val, - (u32)cmd->addr.io.bit_width); - break; - default: - break; - } -} - -static void drv_read(struct drv_cmd *cmd) -{ - int err; - cmd->val = 0; - - err = smp_call_function_any(cmd->mask, do_drv_read, cmd, 1); - WARN_ON_ONCE(err); /* smp_call_function_any() was buggy? */ -} - -static void drv_write(struct drv_cmd *cmd) -{ - int this_cpu; - - this_cpu = get_cpu(); - if (cpumask_test_cpu(this_cpu, cmd->mask)) - do_drv_write(cmd); - smp_call_function_many(cmd->mask, do_drv_write, cmd, 1); - put_cpu(); -} - -static u32 get_cur_val(const struct cpumask *mask) -{ - struct acpi_processor_performance *perf; - struct drv_cmd cmd; - - if (unlikely(cpumask_empty(mask))) - return 0; - - switch (per_cpu(acfreq_data, cpumask_first(mask))->cpu_feature) { - case SYSTEM_INTEL_MSR_CAPABLE: - cmd.type = SYSTEM_INTEL_MSR_CAPABLE; - cmd.addr.msr.reg = MSR_IA32_PERF_STATUS; - break; - case SYSTEM_IO_CAPABLE: - cmd.type = SYSTEM_IO_CAPABLE; - perf = per_cpu(acfreq_data, cpumask_first(mask))->acpi_data; - cmd.addr.io.port = perf->control_register.address; - cmd.addr.io.bit_width = perf->control_register.bit_width; - break; - default: - return 0; - } - - cmd.mask = mask; - drv_read(&cmd); - - dprintk("get_cur_val = %u\n", cmd.val); - - return cmd.val; -} - -static unsigned int get_cur_freq_on_cpu(unsigned int cpu) -{ - struct acpi_cpufreq_data *data = per_cpu(acfreq_data, cpu); - unsigned int freq; - unsigned int cached_freq; - - dprintk("get_cur_freq_on_cpu (%d)\n", cpu); - - if (unlikely(data == NULL || - data->acpi_data == NULL || data->freq_table == NULL)) { - return 0; - } - - cached_freq = data->freq_table[data->acpi_data->state].frequency; - freq = extract_freq(get_cur_val(cpumask_of(cpu)), data); - if (freq != cached_freq) { - /* - * The dreaded BIOS frequency change behind our back. - * Force set the frequency on next target call. - */ - data->resume = 1; - } - - dprintk("cur freq = %u\n", freq); - - return freq; -} - -static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq, - struct acpi_cpufreq_data *data) -{ - unsigned int cur_freq; - unsigned int i; - - for (i = 0; i < 100; i++) { - cur_freq = extract_freq(get_cur_val(mask), data); - if (cur_freq == freq) - return 1; - udelay(10); - } - return 0; -} - -static int acpi_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); - struct acpi_processor_performance *perf; - struct cpufreq_freqs freqs; - struct drv_cmd cmd; - unsigned int next_state = 0; /* Index into freq_table */ - unsigned int next_perf_state = 0; /* Index into perf table */ - unsigned int i; - int result = 0; - - dprintk("acpi_cpufreq_target %d (%d)\n", target_freq, policy->cpu); - - if (unlikely(data == NULL || - data->acpi_data == NULL || data->freq_table == NULL)) { - return -ENODEV; - } - - perf = data->acpi_data; - result = cpufreq_frequency_table_target(policy, - data->freq_table, - target_freq, - relation, &next_state); - if (unlikely(result)) { - result = -ENODEV; - goto out; - } - - next_perf_state = data->freq_table[next_state].index; - if (perf->state == next_perf_state) { - if (unlikely(data->resume)) { - dprintk("Called after resume, resetting to P%d\n", - next_perf_state); - data->resume = 0; - } else { - dprintk("Already at target state (P%d)\n", - next_perf_state); - goto out; - } - } - - switch (data->cpu_feature) { - case SYSTEM_INTEL_MSR_CAPABLE: - cmd.type = SYSTEM_INTEL_MSR_CAPABLE; - cmd.addr.msr.reg = MSR_IA32_PERF_CTL; - cmd.val = (u32) perf->states[next_perf_state].control; - break; - case SYSTEM_IO_CAPABLE: - cmd.type = SYSTEM_IO_CAPABLE; - cmd.addr.io.port = perf->control_register.address; - cmd.addr.io.bit_width = perf->control_register.bit_width; - cmd.val = (u32) perf->states[next_perf_state].control; - break; - default: - result = -ENODEV; - goto out; - } - - /* cpufreq holds the hotplug lock, so we are safe from here on */ - if (policy->shared_type != CPUFREQ_SHARED_TYPE_ANY) - cmd.mask = policy->cpus; - else - cmd.mask = cpumask_of(policy->cpu); - - freqs.old = perf->states[perf->state].core_frequency * 1000; - freqs.new = data->freq_table[next_state].frequency; - for_each_cpu(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - } - - drv_write(&cmd); - - if (acpi_pstate_strict) { - if (!check_freqs(cmd.mask, freqs.new, data)) { - dprintk("acpi_cpufreq_target failed (%d)\n", - policy->cpu); - result = -EAGAIN; - goto out; - } - } - - for_each_cpu(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - perf->state = next_perf_state; - -out: - return result; -} - -static int acpi_cpufreq_verify(struct cpufreq_policy *policy) -{ - struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); - - dprintk("acpi_cpufreq_verify\n"); - - return cpufreq_frequency_table_verify(policy, data->freq_table); -} - -static unsigned long -acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu) -{ - struct acpi_processor_performance *perf = data->acpi_data; - - if (cpu_khz) { - /* search the closest match to cpu_khz */ - unsigned int i; - unsigned long freq; - unsigned long freqn = perf->states[0].core_frequency * 1000; - - for (i = 0; i < (perf->state_count-1); i++) { - freq = freqn; - freqn = perf->states[i+1].core_frequency * 1000; - if ((2 * cpu_khz) > (freqn + freq)) { - perf->state = i; - return freq; - } - } - perf->state = perf->state_count-1; - return freqn; - } else { - /* assume CPU is at P0... */ - perf->state = 0; - return perf->states[0].core_frequency * 1000; - } -} - -static void free_acpi_perf_data(void) -{ - unsigned int i; - - /* Freeing a NULL pointer is OK, and alloc_percpu zeroes. */ - for_each_possible_cpu(i) - free_cpumask_var(per_cpu_ptr(acpi_perf_data, i) - ->shared_cpu_map); - free_percpu(acpi_perf_data); -} - -/* - * acpi_cpufreq_early_init - initialize ACPI P-States library - * - * Initialize the ACPI P-States library (drivers/acpi/processor_perflib.c) - * in order to determine correct frequency and voltage pairings. We can - * do _PDC and _PSD and find out the processor dependency for the - * actual init that will happen later... - */ -static int __init acpi_cpufreq_early_init(void) -{ - unsigned int i; - dprintk("acpi_cpufreq_early_init\n"); - - acpi_perf_data = alloc_percpu(struct acpi_processor_performance); - if (!acpi_perf_data) { - dprintk("Memory allocation error for acpi_perf_data.\n"); - return -ENOMEM; - } - for_each_possible_cpu(i) { - if (!zalloc_cpumask_var_node( - &per_cpu_ptr(acpi_perf_data, i)->shared_cpu_map, - GFP_KERNEL, cpu_to_node(i))) { - - /* Freeing a NULL pointer is OK: alloc_percpu zeroes. */ - free_acpi_perf_data(); - return -ENOMEM; - } - } - - /* Do initialization in ACPI core */ - acpi_processor_preregister_performance(acpi_perf_data); - return 0; -} - -#ifdef CONFIG_SMP -/* - * Some BIOSes do SW_ANY coordination internally, either set it up in hw - * or do it in BIOS firmware and won't inform about it to OS. If not - * detected, this has a side effect of making CPU run at a different speed - * than OS intended it to run at. Detect it and handle it cleanly. - */ -static int bios_with_sw_any_bug; - -static int sw_any_bug_found(const struct dmi_system_id *d) -{ - bios_with_sw_any_bug = 1; - return 0; -} - -static const struct dmi_system_id sw_any_bug_dmi_table[] = { - { - .callback = sw_any_bug_found, - .ident = "Supermicro Server X6DLP", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"), - DMI_MATCH(DMI_BIOS_VERSION, "080010"), - DMI_MATCH(DMI_PRODUCT_NAME, "X6DLP"), - }, - }, - { } -}; - -static int acpi_cpufreq_blacklist(struct cpuinfo_x86 *c) -{ - /* Intel Xeon Processor 7100 Series Specification Update - * http://www.intel.com/Assets/PDF/specupdate/314554.pdf - * AL30: A Machine Check Exception (MCE) Occurring during an - * Enhanced Intel SpeedStep Technology Ratio Change May Cause - * Both Processor Cores to Lock Up. */ - if (c->x86_vendor == X86_VENDOR_INTEL) { - if ((c->x86 == 15) && - (c->x86_model == 6) && - (c->x86_mask == 8)) { - printk(KERN_INFO "acpi-cpufreq: Intel(R) " - "Xeon(R) 7100 Errata AL30, processors may " - "lock up on frequency changes: disabling " - "acpi-cpufreq.\n"); - return -ENODEV; - } - } - return 0; -} -#endif - -static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int i; - unsigned int valid_states = 0; - unsigned int cpu = policy->cpu; - struct acpi_cpufreq_data *data; - unsigned int result = 0; - struct cpuinfo_x86 *c = &cpu_data(policy->cpu); - struct acpi_processor_performance *perf; -#ifdef CONFIG_SMP - static int blacklisted; -#endif - - dprintk("acpi_cpufreq_cpu_init\n"); - -#ifdef CONFIG_SMP - if (blacklisted) - return blacklisted; - blacklisted = acpi_cpufreq_blacklist(c); - if (blacklisted) - return blacklisted; -#endif - - data = kzalloc(sizeof(struct acpi_cpufreq_data), GFP_KERNEL); - if (!data) - return -ENOMEM; - - data->acpi_data = per_cpu_ptr(acpi_perf_data, cpu); - per_cpu(acfreq_data, cpu) = data; - - if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) - acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS; - - result = acpi_processor_register_performance(data->acpi_data, cpu); - if (result) - goto err_free; - - perf = data->acpi_data; - policy->shared_type = perf->shared_type; - - /* - * Will let policy->cpus know about dependency only when software - * coordination is required. - */ - if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL || - policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) { - cpumask_copy(policy->cpus, perf->shared_cpu_map); - } - cpumask_copy(policy->related_cpus, perf->shared_cpu_map); - -#ifdef CONFIG_SMP - dmi_check_system(sw_any_bug_dmi_table); - if (bios_with_sw_any_bug && cpumask_weight(policy->cpus) == 1) { - policy->shared_type = CPUFREQ_SHARED_TYPE_ALL; - cpumask_copy(policy->cpus, cpu_core_mask(cpu)); - } -#endif - - /* capability check */ - if (perf->state_count <= 1) { - dprintk("No P-States\n"); - result = -ENODEV; - goto err_unreg; - } - - if (perf->control_register.space_id != perf->status_register.space_id) { - result = -ENODEV; - goto err_unreg; - } - - switch (perf->control_register.space_id) { - case ACPI_ADR_SPACE_SYSTEM_IO: - dprintk("SYSTEM IO addr space\n"); - data->cpu_feature = SYSTEM_IO_CAPABLE; - break; - case ACPI_ADR_SPACE_FIXED_HARDWARE: - dprintk("HARDWARE addr space\n"); - if (!check_est_cpu(cpu)) { - result = -ENODEV; - goto err_unreg; - } - data->cpu_feature = SYSTEM_INTEL_MSR_CAPABLE; - break; - default: - dprintk("Unknown addr space %d\n", - (u32) (perf->control_register.space_id)); - result = -ENODEV; - goto err_unreg; - } - - data->freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) * - (perf->state_count+1), GFP_KERNEL); - if (!data->freq_table) { - result = -ENOMEM; - goto err_unreg; - } - - /* detect transition latency */ - policy->cpuinfo.transition_latency = 0; - for (i = 0; i < perf->state_count; i++) { - if ((perf->states[i].transition_latency * 1000) > - policy->cpuinfo.transition_latency) - policy->cpuinfo.transition_latency = - perf->states[i].transition_latency * 1000; - } - - /* Check for high latency (>20uS) from buggy BIOSes, like on T42 */ - if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE && - policy->cpuinfo.transition_latency > 20 * 1000) { - policy->cpuinfo.transition_latency = 20 * 1000; - printk_once(KERN_INFO - "P-state transition latency capped at 20 uS\n"); - } - - /* table init */ - for (i = 0; i < perf->state_count; i++) { - if (i > 0 && perf->states[i].core_frequency >= - data->freq_table[valid_states-1].frequency / 1000) - continue; - - data->freq_table[valid_states].index = i; - data->freq_table[valid_states].frequency = - perf->states[i].core_frequency * 1000; - valid_states++; - } - data->freq_table[valid_states].frequency = CPUFREQ_TABLE_END; - perf->state = 0; - - result = cpufreq_frequency_table_cpuinfo(policy, data->freq_table); - if (result) - goto err_freqfree; - - if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq) - printk(KERN_WARNING FW_WARN "P-state 0 is not max freq\n"); - - switch (perf->control_register.space_id) { - case ACPI_ADR_SPACE_SYSTEM_IO: - /* Current speed is unknown and not detectable by IO port */ - policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu); - break; - case ACPI_ADR_SPACE_FIXED_HARDWARE: - acpi_cpufreq_driver.get = get_cur_freq_on_cpu; - policy->cur = get_cur_freq_on_cpu(cpu); - break; - default: - break; - } - - /* notify BIOS that we exist */ - acpi_processor_notify_smm(THIS_MODULE); - - /* Check for APERF/MPERF support in hardware */ - if (cpu_has(c, X86_FEATURE_APERFMPERF)) - acpi_cpufreq_driver.getavg = cpufreq_get_measured_perf; - - dprintk("CPU%u - ACPI performance management activated.\n", cpu); - for (i = 0; i < perf->state_count; i++) - dprintk(" %cP%d: %d MHz, %d mW, %d uS\n", - (i == perf->state ? '*' : ' '), i, - (u32) perf->states[i].core_frequency, - (u32) perf->states[i].power, - (u32) perf->states[i].transition_latency); - - cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu); - - /* - * the first call to ->target() should result in us actually - * writing something to the appropriate registers. - */ - data->resume = 1; - - return result; - -err_freqfree: - kfree(data->freq_table); -err_unreg: - acpi_processor_unregister_performance(perf, cpu); -err_free: - kfree(data); - per_cpu(acfreq_data, cpu) = NULL; - - return result; -} - -static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy) -{ - struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); - - dprintk("acpi_cpufreq_cpu_exit\n"); - - if (data) { - cpufreq_frequency_table_put_attr(policy->cpu); - per_cpu(acfreq_data, policy->cpu) = NULL; - acpi_processor_unregister_performance(data->acpi_data, - policy->cpu); - kfree(data->freq_table); - kfree(data); - } - - return 0; -} - -static int acpi_cpufreq_resume(struct cpufreq_policy *policy) -{ - struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); - - dprintk("acpi_cpufreq_resume\n"); - - data->resume = 1; - - return 0; -} - -static struct freq_attr *acpi_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver acpi_cpufreq_driver = { - .verify = acpi_cpufreq_verify, - .target = acpi_cpufreq_target, - .bios_limit = acpi_processor_get_bios_limit, - .init = acpi_cpufreq_cpu_init, - .exit = acpi_cpufreq_cpu_exit, - .resume = acpi_cpufreq_resume, - .name = "acpi-cpufreq", - .owner = THIS_MODULE, - .attr = acpi_cpufreq_attr, -}; - -static int __init acpi_cpufreq_init(void) -{ - int ret; - - if (acpi_disabled) - return 0; - - dprintk("acpi_cpufreq_init\n"); - - ret = acpi_cpufreq_early_init(); - if (ret) - return ret; - - ret = cpufreq_register_driver(&acpi_cpufreq_driver); - if (ret) - free_acpi_perf_data(); - - return ret; -} - -static void __exit acpi_cpufreq_exit(void) -{ - dprintk("acpi_cpufreq_exit\n"); - - cpufreq_unregister_driver(&acpi_cpufreq_driver); - - free_percpu(acpi_perf_data); -} - -module_param(acpi_pstate_strict, uint, 0644); -MODULE_PARM_DESC(acpi_pstate_strict, - "value 0 or non-zero. non-zero -> strict ACPI checks are " - "performed during frequency changes."); - -late_initcall(acpi_cpufreq_init); -module_exit(acpi_cpufreq_exit); - -MODULE_ALIAS("acpi"); diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c deleted file mode 100644 index 141abebc451..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c +++ /dev/null @@ -1,446 +0,0 @@ -/* - * (C) 2004-2006 Sebastian Witt <se.witt@gmx.net> - * - * Licensed under the terms of the GNU GPL License version 2. - * Based upon reverse engineered information - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/pci.h> -#include <linux/delay.h> - -#define NFORCE2_XTAL 25 -#define NFORCE2_BOOTFSB 0x48 -#define NFORCE2_PLLENABLE 0xa8 -#define NFORCE2_PLLREG 0xa4 -#define NFORCE2_PLLADR 0xa0 -#define NFORCE2_PLL(mul, div) (0x100000 | (mul << 8) | div) - -#define NFORCE2_MIN_FSB 50 -#define NFORCE2_SAFE_DISTANCE 50 - -/* Delay in ms between FSB changes */ -/* #define NFORCE2_DELAY 10 */ - -/* - * nforce2_chipset: - * FSB is changed using the chipset - */ -static struct pci_dev *nforce2_dev; - -/* fid: - * multiplier * 10 - */ -static int fid; - -/* min_fsb, max_fsb: - * minimum and maximum FSB (= FSB at boot time) - */ -static int min_fsb; -static int max_fsb; - -MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>"); -MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver"); -MODULE_LICENSE("GPL"); - -module_param(fid, int, 0444); -module_param(min_fsb, int, 0444); - -MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)"); -MODULE_PARM_DESC(min_fsb, - "Minimum FSB to use, if not defined: current FSB - 50"); - -#define PFX "cpufreq-nforce2: " -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "cpufreq-nforce2", msg) - -/** - * nforce2_calc_fsb - calculate FSB - * @pll: PLL value - * - * Calculates FSB from PLL value - */ -static int nforce2_calc_fsb(int pll) -{ - unsigned char mul, div; - - mul = (pll >> 8) & 0xff; - div = pll & 0xff; - - if (div > 0) - return NFORCE2_XTAL * mul / div; - - return 0; -} - -/** - * nforce2_calc_pll - calculate PLL value - * @fsb: FSB - * - * Calculate PLL value for given FSB - */ -static int nforce2_calc_pll(unsigned int fsb) -{ - unsigned char xmul, xdiv; - unsigned char mul = 0, div = 0; - int tried = 0; - - /* Try to calculate multiplier and divider up to 4 times */ - while (((mul == 0) || (div == 0)) && (tried <= 3)) { - for (xdiv = 2; xdiv <= 0x80; xdiv++) - for (xmul = 1; xmul <= 0xfe; xmul++) - if (nforce2_calc_fsb(NFORCE2_PLL(xmul, xdiv)) == - fsb + tried) { - mul = xmul; - div = xdiv; - } - tried++; - } - - if ((mul == 0) || (div == 0)) - return -1; - - return NFORCE2_PLL(mul, div); -} - -/** - * nforce2_write_pll - write PLL value to chipset - * @pll: PLL value - * - * Writes new FSB PLL value to chipset - */ -static void nforce2_write_pll(int pll) -{ - int temp; - - /* Set the pll addr. to 0x00 */ - pci_write_config_dword(nforce2_dev, NFORCE2_PLLADR, 0); - - /* Now write the value in all 64 registers */ - for (temp = 0; temp <= 0x3f; temp++) - pci_write_config_dword(nforce2_dev, NFORCE2_PLLREG, pll); - - return; -} - -/** - * nforce2_fsb_read - Read FSB - * - * Read FSB from chipset - * If bootfsb != 0, return FSB at boot-time - */ -static unsigned int nforce2_fsb_read(int bootfsb) -{ - struct pci_dev *nforce2_sub5; - u32 fsb, temp = 0; - - /* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */ - nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, 0x01EF, - PCI_ANY_ID, PCI_ANY_ID, NULL); - if (!nforce2_sub5) - return 0; - - pci_read_config_dword(nforce2_sub5, NFORCE2_BOOTFSB, &fsb); - fsb /= 1000000; - - /* Check if PLL register is already set */ - pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp); - - if (bootfsb || !temp) - return fsb; - - /* Use PLL register FSB value */ - pci_read_config_dword(nforce2_dev, NFORCE2_PLLREG, &temp); - fsb = nforce2_calc_fsb(temp); - - return fsb; -} - -/** - * nforce2_set_fsb - set new FSB - * @fsb: New FSB - * - * Sets new FSB - */ -static int nforce2_set_fsb(unsigned int fsb) -{ - u32 temp = 0; - unsigned int tfsb; - int diff; - int pll = 0; - - if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) { - printk(KERN_ERR PFX "FSB %d is out of range!\n", fsb); - return -EINVAL; - } - - tfsb = nforce2_fsb_read(0); - if (!tfsb) { - printk(KERN_ERR PFX "Error while reading the FSB\n"); - return -EINVAL; - } - - /* First write? Then set actual value */ - pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp); - if (!temp) { - pll = nforce2_calc_pll(tfsb); - - if (pll < 0) - return -EINVAL; - - nforce2_write_pll(pll); - } - - /* Enable write access */ - temp = 0x01; - pci_write_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8)temp); - - diff = tfsb - fsb; - - if (!diff) - return 0; - - while ((tfsb != fsb) && (tfsb <= max_fsb) && (tfsb >= min_fsb)) { - if (diff < 0) - tfsb++; - else - tfsb--; - - /* Calculate the PLL reg. value */ - pll = nforce2_calc_pll(tfsb); - if (pll == -1) - return -EINVAL; - - nforce2_write_pll(pll); -#ifdef NFORCE2_DELAY - mdelay(NFORCE2_DELAY); -#endif - } - - temp = 0x40; - pci_write_config_byte(nforce2_dev, NFORCE2_PLLADR, (u8)temp); - - return 0; -} - -/** - * nforce2_get - get the CPU frequency - * @cpu: CPU number - * - * Returns the CPU frequency - */ -static unsigned int nforce2_get(unsigned int cpu) -{ - if (cpu) - return 0; - return nforce2_fsb_read(0) * fid * 100; -} - -/** - * nforce2_target - set a new CPUFreq policy - * @policy: new policy - * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency - * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) - * - * Sets a new CPUFreq policy. - */ -static int nforce2_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ -/* unsigned long flags; */ - struct cpufreq_freqs freqs; - unsigned int target_fsb; - - if ((target_freq > policy->max) || (target_freq < policy->min)) - return -EINVAL; - - target_fsb = target_freq / (fid * 100); - - freqs.old = nforce2_get(policy->cpu); - freqs.new = target_fsb * fid * 100; - freqs.cpu = 0; /* Only one CPU on nForce2 platforms */ - - if (freqs.old == freqs.new) - return 0; - - dprintk("Old CPU frequency %d kHz, new %d kHz\n", - freqs.old, freqs.new); - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* Disable IRQs */ - /* local_irq_save(flags); */ - - if (nforce2_set_fsb(target_fsb) < 0) - printk(KERN_ERR PFX "Changing FSB to %d failed\n", - target_fsb); - else - dprintk("Changed FSB successfully to %d\n", - target_fsb); - - /* Enable IRQs */ - /* local_irq_restore(flags); */ - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - -/** - * nforce2_verify - verifies a new CPUFreq policy - * @policy: new policy - */ -static int nforce2_verify(struct cpufreq_policy *policy) -{ - unsigned int fsb_pol_max; - - fsb_pol_max = policy->max / (fid * 100); - - if (policy->min < (fsb_pol_max * fid * 100)) - policy->max = (fsb_pol_max + 1) * fid * 100; - - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - return 0; -} - -static int nforce2_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int fsb; - unsigned int rfid; - - /* capability check */ - if (policy->cpu != 0) - return -ENODEV; - - /* Get current FSB */ - fsb = nforce2_fsb_read(0); - - if (!fsb) - return -EIO; - - /* FIX: Get FID from CPU */ - if (!fid) { - if (!cpu_khz) { - printk(KERN_WARNING PFX - "cpu_khz not set, can't calculate multiplier!\n"); - return -ENODEV; - } - - fid = cpu_khz / (fsb * 100); - rfid = fid % 5; - - if (rfid) { - if (rfid > 2) - fid += 5 - rfid; - else - fid -= rfid; - } - } - - printk(KERN_INFO PFX "FSB currently at %i MHz, FID %d.%d\n", fsb, - fid / 10, fid % 10); - - /* Set maximum FSB to FSB at boot time */ - max_fsb = nforce2_fsb_read(1); - - if (!max_fsb) - return -EIO; - - if (!min_fsb) - min_fsb = max_fsb - NFORCE2_SAFE_DISTANCE; - - if (min_fsb < NFORCE2_MIN_FSB) - min_fsb = NFORCE2_MIN_FSB; - - /* cpuinfo and default policy values */ - policy->cpuinfo.min_freq = min_fsb * fid * 100; - policy->cpuinfo.max_freq = max_fsb * fid * 100; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - policy->cur = nforce2_get(policy->cpu); - policy->min = policy->cpuinfo.min_freq; - policy->max = policy->cpuinfo.max_freq; - - return 0; -} - -static int nforce2_cpu_exit(struct cpufreq_policy *policy) -{ - return 0; -} - -static struct cpufreq_driver nforce2_driver = { - .name = "nforce2", - .verify = nforce2_verify, - .target = nforce2_target, - .get = nforce2_get, - .init = nforce2_cpu_init, - .exit = nforce2_cpu_exit, - .owner = THIS_MODULE, -}; - -/** - * nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic - * - * Detects nForce2 A2 and C1 stepping - * - */ -static int nforce2_detect_chipset(void) -{ - nforce2_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, - PCI_DEVICE_ID_NVIDIA_NFORCE2, - PCI_ANY_ID, PCI_ANY_ID, NULL); - - if (nforce2_dev == NULL) - return -ENODEV; - - printk(KERN_INFO PFX "Detected nForce2 chipset revision %X\n", - nforce2_dev->revision); - printk(KERN_INFO PFX - "FSB changing is maybe unstable and can lead to " - "crashes and data loss.\n"); - - return 0; -} - -/** - * nforce2_init - initializes the nForce2 CPUFreq driver - * - * Initializes the nForce2 FSB support. Returns -ENODEV on unsupported - * devices, -EINVAL on problems during initiatization, and zero on - * success. - */ -static int __init nforce2_init(void) -{ - /* TODO: do we need to detect the processor? */ - - /* detect chipset */ - if (nforce2_detect_chipset()) { - printk(KERN_INFO PFX "No nForce2 chipset.\n"); - return -ENODEV; - } - - return cpufreq_register_driver(&nforce2_driver); -} - -/** - * nforce2_exit - unregisters cpufreq module - * - * Unregisters nForce2 FSB change support. - */ -static void __exit nforce2_exit(void) -{ - cpufreq_unregister_driver(&nforce2_driver); -} - -module_init(nforce2_init); -module_exit(nforce2_exit); - diff --git a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c deleted file mode 100644 index 35a257dd4bb..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c +++ /dev/null @@ -1,367 +0,0 @@ -/* - * Based on documentation provided by Dave Jones. Thanks! - * - * Licensed under the terms of the GNU GPL License version 2. - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/ioport.h> -#include <linux/slab.h> -#include <linux/timex.h> -#include <linux/io.h> -#include <linux/delay.h> - -#include <asm/msr.h> -#include <asm/tsc.h> - -#define EPS_BRAND_C7M 0 -#define EPS_BRAND_C7 1 -#define EPS_BRAND_EDEN 2 -#define EPS_BRAND_C3 3 -#define EPS_BRAND_C7D 4 - -struct eps_cpu_data { - u32 fsb; - struct cpufreq_frequency_table freq_table[]; -}; - -static struct eps_cpu_data *eps_cpu[NR_CPUS]; - - -static unsigned int eps_get(unsigned int cpu) -{ - struct eps_cpu_data *centaur; - u32 lo, hi; - - if (cpu) - return 0; - centaur = eps_cpu[cpu]; - if (centaur == NULL) - return 0; - - /* Return current frequency */ - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - return centaur->fsb * ((lo >> 8) & 0xff); -} - -static int eps_set_state(struct eps_cpu_data *centaur, - unsigned int cpu, - u32 dest_state) -{ - struct cpufreq_freqs freqs; - u32 lo, hi; - int err = 0; - int i; - - freqs.old = eps_get(cpu); - freqs.new = centaur->fsb * ((dest_state >> 8) & 0xff); - freqs.cpu = cpu; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* Wait while CPU is busy */ - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - i = 0; - while (lo & ((1 << 16) | (1 << 17))) { - udelay(16); - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - i++; - if (unlikely(i > 64)) { - err = -ENODEV; - goto postchange; - } - } - /* Set new multiplier and voltage */ - wrmsr(MSR_IA32_PERF_CTL, dest_state & 0xffff, 0); - /* Wait until transition end */ - i = 0; - do { - udelay(16); - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - i++; - if (unlikely(i > 64)) { - err = -ENODEV; - goto postchange; - } - } while (lo & ((1 << 16) | (1 << 17))); - - /* Return current frequency */ -postchange: - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - freqs.new = centaur->fsb * ((lo >> 8) & 0xff); - -#ifdef DEBUG - { - u8 current_multiplier, current_voltage; - - /* Print voltage and multiplier */ - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - current_voltage = lo & 0xff; - printk(KERN_INFO "eps: Current voltage = %dmV\n", - current_voltage * 16 + 700); - current_multiplier = (lo >> 8) & 0xff; - printk(KERN_INFO "eps: Current multiplier = %d\n", - current_multiplier); - } -#endif - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - return err; -} - -static int eps_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct eps_cpu_data *centaur; - unsigned int newstate = 0; - unsigned int cpu = policy->cpu; - unsigned int dest_state; - int ret; - - if (unlikely(eps_cpu[cpu] == NULL)) - return -ENODEV; - centaur = eps_cpu[cpu]; - - if (unlikely(cpufreq_frequency_table_target(policy, - &eps_cpu[cpu]->freq_table[0], - target_freq, - relation, - &newstate))) { - return -EINVAL; - } - - /* Make frequency transition */ - dest_state = centaur->freq_table[newstate].index & 0xffff; - ret = eps_set_state(centaur, cpu, dest_state); - if (ret) - printk(KERN_ERR "eps: Timeout!\n"); - return ret; -} - -static int eps_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, - &eps_cpu[policy->cpu]->freq_table[0]); -} - -static int eps_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int i; - u32 lo, hi; - u64 val; - u8 current_multiplier, current_voltage; - u8 max_multiplier, max_voltage; - u8 min_multiplier, min_voltage; - u8 brand = 0; - u32 fsb; - struct eps_cpu_data *centaur; - struct cpuinfo_x86 *c = &cpu_data(0); - struct cpufreq_frequency_table *f_table; - int k, step, voltage; - int ret; - int states; - - if (policy->cpu != 0) - return -ENODEV; - - /* Check brand */ - printk(KERN_INFO "eps: Detected VIA "); - - switch (c->x86_model) { - case 10: - rdmsr(0x1153, lo, hi); - brand = (((lo >> 2) ^ lo) >> 18) & 3; - printk(KERN_CONT "Model A "); - break; - case 13: - rdmsr(0x1154, lo, hi); - brand = (((lo >> 4) ^ (lo >> 2))) & 0x000000ff; - printk(KERN_CONT "Model D "); - break; - } - - switch (brand) { - case EPS_BRAND_C7M: - printk(KERN_CONT "C7-M\n"); - break; - case EPS_BRAND_C7: - printk(KERN_CONT "C7\n"); - break; - case EPS_BRAND_EDEN: - printk(KERN_CONT "Eden\n"); - break; - case EPS_BRAND_C7D: - printk(KERN_CONT "C7-D\n"); - break; - case EPS_BRAND_C3: - printk(KERN_CONT "C3\n"); - return -ENODEV; - break; - } - /* Enable Enhanced PowerSaver */ - rdmsrl(MSR_IA32_MISC_ENABLE, val); - if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { - val |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP; - wrmsrl(MSR_IA32_MISC_ENABLE, val); - /* Can be locked at 0 */ - rdmsrl(MSR_IA32_MISC_ENABLE, val); - if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { - printk(KERN_INFO "eps: Can't enable Enhanced PowerSaver\n"); - return -ENODEV; - } - } - - /* Print voltage and multiplier */ - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - current_voltage = lo & 0xff; - printk(KERN_INFO "eps: Current voltage = %dmV\n", - current_voltage * 16 + 700); - current_multiplier = (lo >> 8) & 0xff; - printk(KERN_INFO "eps: Current multiplier = %d\n", current_multiplier); - - /* Print limits */ - max_voltage = hi & 0xff; - printk(KERN_INFO "eps: Highest voltage = %dmV\n", - max_voltage * 16 + 700); - max_multiplier = (hi >> 8) & 0xff; - printk(KERN_INFO "eps: Highest multiplier = %d\n", max_multiplier); - min_voltage = (hi >> 16) & 0xff; - printk(KERN_INFO "eps: Lowest voltage = %dmV\n", - min_voltage * 16 + 700); - min_multiplier = (hi >> 24) & 0xff; - printk(KERN_INFO "eps: Lowest multiplier = %d\n", min_multiplier); - - /* Sanity checks */ - if (current_multiplier == 0 || max_multiplier == 0 - || min_multiplier == 0) - return -EINVAL; - if (current_multiplier > max_multiplier - || max_multiplier <= min_multiplier) - return -EINVAL; - if (current_voltage > 0x1f || max_voltage > 0x1f) - return -EINVAL; - if (max_voltage < min_voltage) - return -EINVAL; - - /* Calc FSB speed */ - fsb = cpu_khz / current_multiplier; - /* Calc number of p-states supported */ - if (brand == EPS_BRAND_C7M) - states = max_multiplier - min_multiplier + 1; - else - states = 2; - - /* Allocate private data and frequency table for current cpu */ - centaur = kzalloc(sizeof(struct eps_cpu_data) - + (states + 1) * sizeof(struct cpufreq_frequency_table), - GFP_KERNEL); - if (!centaur) - return -ENOMEM; - eps_cpu[0] = centaur; - - /* Copy basic values */ - centaur->fsb = fsb; - - /* Fill frequency and MSR value table */ - f_table = ¢aur->freq_table[0]; - if (brand != EPS_BRAND_C7M) { - f_table[0].frequency = fsb * min_multiplier; - f_table[0].index = (min_multiplier << 8) | min_voltage; - f_table[1].frequency = fsb * max_multiplier; - f_table[1].index = (max_multiplier << 8) | max_voltage; - f_table[2].frequency = CPUFREQ_TABLE_END; - } else { - k = 0; - step = ((max_voltage - min_voltage) * 256) - / (max_multiplier - min_multiplier); - for (i = min_multiplier; i <= max_multiplier; i++) { - voltage = (k * step) / 256 + min_voltage; - f_table[k].frequency = fsb * i; - f_table[k].index = (i << 8) | voltage; - k++; - } - f_table[k].frequency = CPUFREQ_TABLE_END; - } - - policy->cpuinfo.transition_latency = 140000; /* 844mV -> 700mV in ns */ - policy->cur = fsb * current_multiplier; - - ret = cpufreq_frequency_table_cpuinfo(policy, ¢aur->freq_table[0]); - if (ret) { - kfree(centaur); - return ret; - } - - cpufreq_frequency_table_get_attr(¢aur->freq_table[0], policy->cpu); - return 0; -} - -static int eps_cpu_exit(struct cpufreq_policy *policy) -{ - unsigned int cpu = policy->cpu; - struct eps_cpu_data *centaur; - u32 lo, hi; - - if (eps_cpu[cpu] == NULL) - return -ENODEV; - centaur = eps_cpu[cpu]; - - /* Get max frequency */ - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - /* Set max frequency */ - eps_set_state(centaur, cpu, hi & 0xffff); - /* Bye */ - cpufreq_frequency_table_put_attr(policy->cpu); - kfree(eps_cpu[cpu]); - eps_cpu[cpu] = NULL; - return 0; -} - -static struct freq_attr *eps_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver eps_driver = { - .verify = eps_verify, - .target = eps_target, - .init = eps_cpu_init, - .exit = eps_cpu_exit, - .get = eps_get, - .name = "e_powersaver", - .owner = THIS_MODULE, - .attr = eps_attr, -}; - -static int __init eps_init(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - - /* This driver will work only on Centaur C7 processors with - * Enhanced SpeedStep/PowerSaver registers */ - if (c->x86_vendor != X86_VENDOR_CENTAUR - || c->x86 != 6 || c->x86_model < 10) - return -ENODEV; - if (!cpu_has(c, X86_FEATURE_EST)) - return -ENODEV; - - if (cpufreq_register_driver(&eps_driver)) - return -EINVAL; - return 0; -} - -static void __exit eps_exit(void) -{ - cpufreq_unregister_driver(&eps_driver); -} - -MODULE_AUTHOR("Rafal Bilski <rafalbilski@interia.pl>"); -MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's."); -MODULE_LICENSE("GPL"); - -module_init(eps_init); -module_exit(eps_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/arch/x86/kernel/cpu/cpufreq/elanfreq.c deleted file mode 100644 index c587db472a7..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/elanfreq.c +++ /dev/null @@ -1,309 +0,0 @@ -/* - * elanfreq: cpufreq driver for the AMD ELAN family - * - * (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de> - * - * Parts of this code are (c) Sven Geggus <sven@geggus.net> - * - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * 2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> - -#include <linux/delay.h> -#include <linux/cpufreq.h> - -#include <asm/msr.h> -#include <linux/timex.h> -#include <linux/io.h> - -#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */ -#define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */ - -/* Module parameter */ -static int max_freq; - -struct s_elan_multiplier { - int clock; /* frequency in kHz */ - int val40h; /* PMU Force Mode register */ - int val80h; /* CPU Clock Speed Register */ -}; - -/* - * It is important that the frequencies - * are listed in ascending order here! - */ -static struct s_elan_multiplier elan_multiplier[] = { - {1000, 0x02, 0x18}, - {2000, 0x02, 0x10}, - {4000, 0x02, 0x08}, - {8000, 0x00, 0x00}, - {16000, 0x00, 0x02}, - {33000, 0x00, 0x04}, - {66000, 0x01, 0x04}, - {99000, 0x01, 0x05} -}; - -static struct cpufreq_frequency_table elanfreq_table[] = { - {0, 1000}, - {1, 2000}, - {2, 4000}, - {3, 8000}, - {4, 16000}, - {5, 33000}, - {6, 66000}, - {7, 99000}, - {0, CPUFREQ_TABLE_END}, -}; - - -/** - * elanfreq_get_cpu_frequency: determine current cpu speed - * - * Finds out at which frequency the CPU of the Elan SOC runs - * at the moment. Frequencies from 1 to 33 MHz are generated - * the normal way, 66 and 99 MHz are called "Hyperspeed Mode" - * and have the rest of the chip running with 33 MHz. - */ - -static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu) -{ - u8 clockspeed_reg; /* Clock Speed Register */ - - local_irq_disable(); - outb_p(0x80, REG_CSCIR); - clockspeed_reg = inb_p(REG_CSCDR); - local_irq_enable(); - - if ((clockspeed_reg & 0xE0) == 0xE0) - return 0; - - /* Are we in CPU clock multiplied mode (66/99 MHz)? */ - if ((clockspeed_reg & 0xE0) == 0xC0) { - if ((clockspeed_reg & 0x01) == 0) - return 66000; - else - return 99000; - } - - /* 33 MHz is not 32 MHz... */ - if ((clockspeed_reg & 0xE0) == 0xA0) - return 33000; - - return (1<<((clockspeed_reg & 0xE0) >> 5)) * 1000; -} - - -/** - * elanfreq_set_cpu_frequency: Change the CPU core frequency - * @cpu: cpu number - * @freq: frequency in kHz - * - * This function takes a frequency value and changes the CPU frequency - * according to this. Note that the frequency has to be checked by - * elanfreq_validatespeed() for correctness! - * - * There is no return value. - */ - -static void elanfreq_set_cpu_state(unsigned int state) -{ - struct cpufreq_freqs freqs; - - freqs.old = elanfreq_get_cpu_frequency(0); - freqs.new = elan_multiplier[state].clock; - freqs.cpu = 0; /* elanfreq.c is UP only driver */ - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n", - elan_multiplier[state].clock); - - - /* - * Access to the Elan's internal registers is indexed via - * 0x22: Chip Setup & Control Register Index Register (CSCI) - * 0x23: Chip Setup & Control Register Data Register (CSCD) - * - */ - - /* - * 0x40 is the Power Management Unit's Force Mode Register. - * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency) - */ - - local_irq_disable(); - outb_p(0x40, REG_CSCIR); /* Disable hyperspeed mode */ - outb_p(0x00, REG_CSCDR); - local_irq_enable(); /* wait till internal pipelines and */ - udelay(1000); /* buffers have cleaned up */ - - local_irq_disable(); - - /* now, set the CPU clock speed register (0x80) */ - outb_p(0x80, REG_CSCIR); - outb_p(elan_multiplier[state].val80h, REG_CSCDR); - - /* now, the hyperspeed bit in PMU Force Mode Register (0x40) */ - outb_p(0x40, REG_CSCIR); - outb_p(elan_multiplier[state].val40h, REG_CSCDR); - udelay(10000); - local_irq_enable(); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); -}; - - -/** - * elanfreq_validatespeed: test if frequency range is valid - * @policy: the policy to validate - * - * This function checks if a given frequency range in kHz is valid - * for the hardware supported by the driver. - */ - -static int elanfreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]); -} - -static int elanfreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], - target_freq, relation, &newstate)) - return -EINVAL; - - elanfreq_set_cpu_state(newstate); - - return 0; -} - - -/* - * Module init and exit code - */ - -static int elanfreq_cpu_init(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - unsigned int i; - int result; - - /* capability check */ - if ((c->x86_vendor != X86_VENDOR_AMD) || - (c->x86 != 4) || (c->x86_model != 10)) - return -ENODEV; - - /* max freq */ - if (!max_freq) - max_freq = elanfreq_get_cpu_frequency(0); - - /* table init */ - for (i = 0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) { - if (elanfreq_table[i].frequency > max_freq) - elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID; - } - - /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - policy->cur = elanfreq_get_cpu_frequency(0); - - result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table); - if (result) - return result; - - cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu); - return 0; -} - - -static int elanfreq_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - - -#ifndef MODULE -/** - * elanfreq_setup - elanfreq command line parameter parsing - * - * elanfreq command line parameter. Use: - * elanfreq=66000 - * to set the maximum CPU frequency to 66 MHz. Note that in - * case you do not give this boot parameter, the maximum - * frequency will fall back to _current_ CPU frequency which - * might be lower. If you build this as a module, use the - * max_freq module parameter instead. - */ -static int __init elanfreq_setup(char *str) -{ - max_freq = simple_strtoul(str, &str, 0); - printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n"); - return 1; -} -__setup("elanfreq=", elanfreq_setup); -#endif - - -static struct freq_attr *elanfreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - - -static struct cpufreq_driver elanfreq_driver = { - .get = elanfreq_get_cpu_frequency, - .verify = elanfreq_verify, - .target = elanfreq_target, - .init = elanfreq_cpu_init, - .exit = elanfreq_cpu_exit, - .name = "elanfreq", - .owner = THIS_MODULE, - .attr = elanfreq_attr, -}; - - -static int __init elanfreq_init(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - - /* Test if we have the right hardware */ - if ((c->x86_vendor != X86_VENDOR_AMD) || - (c->x86 != 4) || (c->x86_model != 10)) { - printk(KERN_INFO "elanfreq: error: no Elan processor found!\n"); - return -ENODEV; - } - return cpufreq_register_driver(&elanfreq_driver); -} - - -static void __exit elanfreq_exit(void) -{ - cpufreq_unregister_driver(&elanfreq_driver); -} - - -module_param(max_freq, int, 0444); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, " - "Sven Geggus <sven@geggus.net>"); -MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs"); - -module_init(elanfreq_init); -module_exit(elanfreq_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c deleted file mode 100644 index 32974cf8423..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c +++ /dev/null @@ -1,517 +0,0 @@ -/* - * Cyrix MediaGX and NatSemi Geode Suspend Modulation - * (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com> - * (C) 2002 Hiroshi Miura <miura@da-cha.org> - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation - * - * The author(s) of this software shall not be held liable for damages - * of any nature resulting due to the use of this software. This - * software is provided AS-IS with no warranties. - * - * Theoretical note: - * - * (see Geode(tm) CS5530 manual (rev.4.1) page.56) - * - * CPU frequency control on NatSemi Geode GX1/GXLV processor and CS55x0 - * are based on Suspend Modulation. - * - * Suspend Modulation works by asserting and de-asserting the SUSP# pin - * to CPU(GX1/GXLV) for configurable durations. When asserting SUSP# - * the CPU enters an idle state. GX1 stops its core clock when SUSP# is - * asserted then power consumption is reduced. - * - * Suspend Modulation's OFF/ON duration are configurable - * with 'Suspend Modulation OFF Count Register' - * and 'Suspend Modulation ON Count Register'. - * These registers are 8bit counters that represent the number of - * 32us intervals which the SUSP# pin is asserted(ON)/de-asserted(OFF) - * to the processor. - * - * These counters define a ratio which is the effective frequency - * of operation of the system. - * - * OFF Count - * F_eff = Fgx * ---------------------- - * OFF Count + ON Count - * - * 0 <= On Count, Off Count <= 255 - * - * From these limits, we can get register values - * - * off_duration + on_duration <= MAX_DURATION - * on_duration = off_duration * (stock_freq - freq) / freq - * - * off_duration = (freq * DURATION) / stock_freq - * on_duration = DURATION - off_duration - * - * - *--------------------------------------------------------------------------- - * - * ChangeLog: - * Dec. 12, 2003 Hiroshi Miura <miura@da-cha.org> - * - fix on/off register mistake - * - fix cpu_khz calc when it stops cpu modulation. - * - * Dec. 11, 2002 Hiroshi Miura <miura@da-cha.org> - * - rewrite for Cyrix MediaGX Cx5510/5520 and - * NatSemi Geode Cs5530(A). - * - * Jul. ??, 2002 Zwane Mwaikambo <zwane@commfireservices.com> - * - cs5530_mod patch for 2.4.19-rc1. - * - *--------------------------------------------------------------------------- - * - * Todo - * Test on machines with 5510, 5530, 5530A - */ - -/************************************************************************ - * Suspend Modulation - Definitions * - ************************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/cpufreq.h> -#include <linux/pci.h> -#include <linux/errno.h> -#include <linux/slab.h> - -#include <asm/processor-cyrix.h> - -/* PCI config registers, all at F0 */ -#define PCI_PMER1 0x80 /* power management enable register 1 */ -#define PCI_PMER2 0x81 /* power management enable register 2 */ -#define PCI_PMER3 0x82 /* power management enable register 3 */ -#define PCI_IRQTC 0x8c /* irq speedup timer counter register:typical 2 to 4ms */ -#define PCI_VIDTC 0x8d /* video speedup timer counter register: typical 50 to 100ms */ -#define PCI_MODOFF 0x94 /* suspend modulation OFF counter register, 1 = 32us */ -#define PCI_MODON 0x95 /* suspend modulation ON counter register */ -#define PCI_SUSCFG 0x96 /* suspend configuration register */ - -/* PMER1 bits */ -#define GPM (1<<0) /* global power management */ -#define GIT (1<<1) /* globally enable PM device idle timers */ -#define GTR (1<<2) /* globally enable IO traps */ -#define IRQ_SPDUP (1<<3) /* disable clock throttle during interrupt handling */ -#define VID_SPDUP (1<<4) /* disable clock throttle during vga video handling */ - -/* SUSCFG bits */ -#define SUSMOD (1<<0) /* enable/disable suspend modulation */ -/* the below is supported only with cs5530 (after rev.1.2)/cs5530A */ -#define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */ - /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */ -#define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */ -/* the below is supported only with cs5530A */ -#define PWRSVE_ISA (1<<3) /* stop ISA clock */ -#define PWRSVE (1<<4) /* active idle */ - -struct gxfreq_params { - u8 on_duration; - u8 off_duration; - u8 pci_suscfg; - u8 pci_pmer1; - u8 pci_pmer2; - struct pci_dev *cs55x0; -}; - -static struct gxfreq_params *gx_params; -static int stock_freq; - -/* PCI bus clock - defaults to 30.000 if cpu_khz is not available */ -static int pci_busclk; -module_param(pci_busclk, int, 0444); - -/* maximum duration for which the cpu may be suspended - * (32us * MAX_DURATION). If no parameter is given, this defaults - * to 255. - * Note that this leads to a maximum of 8 ms(!) where the CPU clock - * is suspended -- processing power is just 0.39% of what it used to be, - * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */ -static int max_duration = 255; -module_param(max_duration, int, 0444); - -/* For the default policy, we want at least some processing power - * - let's say 5%. (min = maxfreq / POLICY_MIN_DIV) - */ -#define POLICY_MIN_DIV 20 - - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "gx-suspmod", msg) - -/** - * we can detect a core multipiler from dir0_lsb - * from GX1 datasheet p.56, - * MULT[3:0]: - * 0000 = SYSCLK multiplied by 4 (test only) - * 0001 = SYSCLK multiplied by 10 - * 0010 = SYSCLK multiplied by 4 - * 0011 = SYSCLK multiplied by 6 - * 0100 = SYSCLK multiplied by 9 - * 0101 = SYSCLK multiplied by 5 - * 0110 = SYSCLK multiplied by 7 - * 0111 = SYSCLK multiplied by 8 - * of 33.3MHz - **/ -static int gx_freq_mult[16] = { - 4, 10, 4, 6, 9, 5, 7, 8, - 0, 0, 0, 0, 0, 0, 0, 0 -}; - - -/**************************************************************** - * Low Level chipset interface * - ****************************************************************/ -static struct pci_device_id gx_chipset_tbl[] __initdata = { - { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY), }, - { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5520), }, - { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), }, - { 0, }, -}; - -static void gx_write_byte(int reg, int value) -{ - pci_write_config_byte(gx_params->cs55x0, reg, value); -} - -/** - * gx_detect_chipset: - * - **/ -static __init struct pci_dev *gx_detect_chipset(void) -{ - struct pci_dev *gx_pci = NULL; - - /* check if CPU is a MediaGX or a Geode. */ - if ((boot_cpu_data.x86_vendor != X86_VENDOR_NSC) && - (boot_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) { - dprintk("error: no MediaGX/Geode processor found!\n"); - return NULL; - } - - /* detect which companion chip is used */ - for_each_pci_dev(gx_pci) { - if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL) - return gx_pci; - } - - dprintk("error: no supported chipset found!\n"); - return NULL; -} - -/** - * gx_get_cpuspeed: - * - * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi - * Geode CPU runs. - */ -static unsigned int gx_get_cpuspeed(unsigned int cpu) -{ - if ((gx_params->pci_suscfg & SUSMOD) == 0) - return stock_freq; - - return (stock_freq * gx_params->off_duration) - / (gx_params->on_duration + gx_params->off_duration); -} - -/** - * gx_validate_speed: - * determine current cpu speed - * - **/ - -static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, - u8 *off_duration) -{ - unsigned int i; - u8 tmp_on, tmp_off; - int old_tmp_freq = stock_freq; - int tmp_freq; - - *off_duration = 1; - *on_duration = 0; - - for (i = max_duration; i > 0; i--) { - tmp_off = ((khz * i) / stock_freq) & 0xff; - tmp_on = i - tmp_off; - tmp_freq = (stock_freq * tmp_off) / i; - /* if this relation is closer to khz, use this. If it's equal, - * prefer it, too - lower latency */ - if (abs(tmp_freq - khz) <= abs(old_tmp_freq - khz)) { - *on_duration = tmp_on; - *off_duration = tmp_off; - old_tmp_freq = tmp_freq; - } - } - - return old_tmp_freq; -} - - -/** - * gx_set_cpuspeed: - * set cpu speed in khz. - **/ - -static void gx_set_cpuspeed(unsigned int khz) -{ - u8 suscfg, pmer1; - unsigned int new_khz; - unsigned long flags; - struct cpufreq_freqs freqs; - - freqs.cpu = 0; - freqs.old = gx_get_cpuspeed(0); - - new_khz = gx_validate_speed(khz, &gx_params->on_duration, - &gx_params->off_duration); - - freqs.new = new_khz; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - local_irq_save(flags); - - - - if (new_khz != stock_freq) { - /* if new khz == 100% of CPU speed, it is special case */ - switch (gx_params->cs55x0->device) { - case PCI_DEVICE_ID_CYRIX_5530_LEGACY: - pmer1 = gx_params->pci_pmer1 | IRQ_SPDUP | VID_SPDUP; - /* FIXME: need to test other values -- Zwane,Miura */ - /* typical 2 to 4ms */ - gx_write_byte(PCI_IRQTC, 4); - /* typical 50 to 100ms */ - gx_write_byte(PCI_VIDTC, 100); - gx_write_byte(PCI_PMER1, pmer1); - - if (gx_params->cs55x0->revision < 0x10) { - /* CS5530(rev 1.2, 1.3) */ - suscfg = gx_params->pci_suscfg|SUSMOD; - } else { - /* CS5530A,B.. */ - suscfg = gx_params->pci_suscfg|SUSMOD|PWRSVE; - } - break; - case PCI_DEVICE_ID_CYRIX_5520: - case PCI_DEVICE_ID_CYRIX_5510: - suscfg = gx_params->pci_suscfg | SUSMOD; - break; - default: - local_irq_restore(flags); - dprintk("fatal: try to set unknown chipset.\n"); - return; - } - } else { - suscfg = gx_params->pci_suscfg & ~(SUSMOD); - gx_params->off_duration = 0; - gx_params->on_duration = 0; - dprintk("suspend modulation disabled: cpu runs 100%% speed.\n"); - } - - gx_write_byte(PCI_MODOFF, gx_params->off_duration); - gx_write_byte(PCI_MODON, gx_params->on_duration); - - gx_write_byte(PCI_SUSCFG, suscfg); - pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg); - - local_irq_restore(flags); - - gx_params->pci_suscfg = suscfg; - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n", - gx_params->on_duration * 32, gx_params->off_duration * 32); - dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new); -} - -/**************************************************************** - * High level functions * - ****************************************************************/ - -/* - * cpufreq_gx_verify: test if frequency range is valid - * - * This function checks if a given frequency range in kHz is valid - * for the hardware supported by the driver. - */ - -static int cpufreq_gx_verify(struct cpufreq_policy *policy) -{ - unsigned int tmp_freq = 0; - u8 tmp1, tmp2; - - if (!stock_freq || !policy) - return -EINVAL; - - policy->cpu = 0; - cpufreq_verify_within_limits(policy, (stock_freq / max_duration), - stock_freq); - - /* it needs to be assured that at least one supported frequency is - * within policy->min and policy->max. If it is not, policy->max - * needs to be increased until one freuqency is supported. - * policy->min may not be decreased, though. This way we guarantee a - * specific processing capacity. - */ - tmp_freq = gx_validate_speed(policy->min, &tmp1, &tmp2); - if (tmp_freq < policy->min) - tmp_freq += stock_freq / max_duration; - policy->min = tmp_freq; - if (policy->min > policy->max) - policy->max = tmp_freq; - tmp_freq = gx_validate_speed(policy->max, &tmp1, &tmp2); - if (tmp_freq > policy->max) - tmp_freq -= stock_freq / max_duration; - policy->max = tmp_freq; - if (policy->max < policy->min) - policy->max = policy->min; - cpufreq_verify_within_limits(policy, (stock_freq / max_duration), - stock_freq); - - return 0; -} - -/* - * cpufreq_gx_target: - * - */ -static int cpufreq_gx_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - u8 tmp1, tmp2; - unsigned int tmp_freq; - - if (!stock_freq || !policy) - return -EINVAL; - - policy->cpu = 0; - - tmp_freq = gx_validate_speed(target_freq, &tmp1, &tmp2); - while (tmp_freq < policy->min) { - tmp_freq += stock_freq / max_duration; - tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2); - } - while (tmp_freq > policy->max) { - tmp_freq -= stock_freq / max_duration; - tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2); - } - - gx_set_cpuspeed(tmp_freq); - - return 0; -} - -static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int maxfreq, curfreq; - - if (!policy || policy->cpu != 0) - return -ENODEV; - - /* determine maximum frequency */ - if (pci_busclk) - maxfreq = pci_busclk * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f]; - else if (cpu_khz) - maxfreq = cpu_khz; - else - maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f]; - - stock_freq = maxfreq; - curfreq = gx_get_cpuspeed(0); - - dprintk("cpu max frequency is %d.\n", maxfreq); - dprintk("cpu current frequency is %dkHz.\n", curfreq); - - /* setup basic struct for cpufreq API */ - policy->cpu = 0; - - if (max_duration < POLICY_MIN_DIV) - policy->min = maxfreq / max_duration; - else - policy->min = maxfreq / POLICY_MIN_DIV; - policy->max = maxfreq; - policy->cur = curfreq; - policy->cpuinfo.min_freq = maxfreq / max_duration; - policy->cpuinfo.max_freq = maxfreq; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - - return 0; -} - -/* - * cpufreq_gx_init: - * MediaGX/Geode GX initialize cpufreq driver - */ -static struct cpufreq_driver gx_suspmod_driver = { - .get = gx_get_cpuspeed, - .verify = cpufreq_gx_verify, - .target = cpufreq_gx_target, - .init = cpufreq_gx_cpu_init, - .name = "gx-suspmod", - .owner = THIS_MODULE, -}; - -static int __init cpufreq_gx_init(void) -{ - int ret; - struct gxfreq_params *params; - struct pci_dev *gx_pci; - - /* Test if we have the right hardware */ - gx_pci = gx_detect_chipset(); - if (gx_pci == NULL) - return -ENODEV; - - /* check whether module parameters are sane */ - if (max_duration > 0xff) - max_duration = 0xff; - - dprintk("geode suspend modulation available.\n"); - - params = kzalloc(sizeof(struct gxfreq_params), GFP_KERNEL); - if (params == NULL) - return -ENOMEM; - - params->cs55x0 = gx_pci; - gx_params = params; - - /* keep cs55x0 configurations */ - pci_read_config_byte(params->cs55x0, PCI_SUSCFG, &(params->pci_suscfg)); - pci_read_config_byte(params->cs55x0, PCI_PMER1, &(params->pci_pmer1)); - pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2)); - pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration)); - pci_read_config_byte(params->cs55x0, PCI_MODOFF, - &(params->off_duration)); - - ret = cpufreq_register_driver(&gx_suspmod_driver); - if (ret) { - kfree(params); - return ret; /* register error! */ - } - - return 0; -} - -static void __exit cpufreq_gx_exit(void) -{ - cpufreq_unregister_driver(&gx_suspmod_driver); - pci_dev_put(gx_params->cs55x0); - kfree(gx_params); -} - -MODULE_AUTHOR("Hiroshi Miura <miura@da-cha.org>"); -MODULE_DESCRIPTION("Cpufreq driver for Cyrix MediaGX and NatSemi Geode"); -MODULE_LICENSE("GPL"); - -module_init(cpufreq_gx_init); -module_exit(cpufreq_gx_exit); - diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c deleted file mode 100644 index cf48cdd6907..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/longhaul.c +++ /dev/null @@ -1,1029 +0,0 @@ -/* - * (C) 2001-2004 Dave Jones. <davej@redhat.com> - * (C) 2002 Padraig Brady. <padraig@antefacto.com> - * - * Licensed under the terms of the GNU GPL License version 2. - * Based upon datasheets & sample CPUs kindly provided by VIA. - * - * VIA have currently 3 different versions of Longhaul. - * Version 1 (Longhaul) uses the BCR2 MSR at 0x1147. - * It is present only in Samuel 1 (C5A), Samuel 2 (C5B) stepping 0. - * Version 2 of longhaul is backward compatible with v1, but adds - * LONGHAUL MSR for purpose of both frequency and voltage scaling. - * Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C). - * Version 3 of longhaul got renamed to Powersaver and redesigned - * to use only the POWERSAVER MSR at 0x110a. - * It is present in Ezra-T (C5M), Nehemiah (C5X) and above. - * It's pretty much the same feature wise to longhaul v2, though - * there is provision for scaling FSB too, but this doesn't work - * too well in practice so we don't even try to use this. - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/delay.h> -#include <linux/timex.h> -#include <linux/io.h> -#include <linux/acpi.h> - -#include <asm/msr.h> -#include <acpi/processor.h> - -#include "longhaul.h" - -#define PFX "longhaul: " - -#define TYPE_LONGHAUL_V1 1 -#define TYPE_LONGHAUL_V2 2 -#define TYPE_POWERSAVER 3 - -#define CPU_SAMUEL 1 -#define CPU_SAMUEL2 2 -#define CPU_EZRA 3 -#define CPU_EZRA_T 4 -#define CPU_NEHEMIAH 5 -#define CPU_NEHEMIAH_C 6 - -/* Flags */ -#define USE_ACPI_C3 (1 << 1) -#define USE_NORTHBRIDGE (1 << 2) - -static int cpu_model; -static unsigned int numscales = 16; -static unsigned int fsb; - -static const struct mV_pos *vrm_mV_table; -static const unsigned char *mV_vrm_table; - -static unsigned int highest_speed, lowest_speed; /* kHz */ -static unsigned int minmult, maxmult; -static int can_scale_voltage; -static struct acpi_processor *pr; -static struct acpi_processor_cx *cx; -static u32 acpi_regs_addr; -static u8 longhaul_flags; -static unsigned int longhaul_index; - -/* Module parameters */ -static int scale_voltage; -static int disable_acpi_c3; -static int revid_errata; - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "longhaul", msg) - - -/* Clock ratios multiplied by 10 */ -static int mults[32]; -static int eblcr[32]; -static int longhaul_version; -static struct cpufreq_frequency_table *longhaul_table; - -#ifdef CONFIG_CPU_FREQ_DEBUG -static char speedbuffer[8]; - -static char *print_speed(int speed) -{ - if (speed < 1000) { - snprintf(speedbuffer, sizeof(speedbuffer), "%dMHz", speed); - return speedbuffer; - } - - if (speed%1000 == 0) - snprintf(speedbuffer, sizeof(speedbuffer), - "%dGHz", speed/1000); - else - snprintf(speedbuffer, sizeof(speedbuffer), - "%d.%dGHz", speed/1000, (speed%1000)/100); - - return speedbuffer; -} -#endif - - -static unsigned int calc_speed(int mult) -{ - int khz; - khz = (mult/10)*fsb; - if (mult%10) - khz += fsb/2; - khz *= 1000; - return khz; -} - - -static int longhaul_get_cpu_mult(void) -{ - unsigned long invalue = 0, lo, hi; - - rdmsr(MSR_IA32_EBL_CR_POWERON, lo, hi); - invalue = (lo & (1<<22|1<<23|1<<24|1<<25))>>22; - if (longhaul_version == TYPE_LONGHAUL_V2 || - longhaul_version == TYPE_POWERSAVER) { - if (lo & (1<<27)) - invalue += 16; - } - return eblcr[invalue]; -} - -/* For processor with BCR2 MSR */ - -static void do_longhaul1(unsigned int mults_index) -{ - union msr_bcr2 bcr2; - - rdmsrl(MSR_VIA_BCR2, bcr2.val); - /* Enable software clock multiplier */ - bcr2.bits.ESOFTBF = 1; - bcr2.bits.CLOCKMUL = mults_index & 0xff; - - /* Sync to timer tick */ - safe_halt(); - /* Change frequency on next halt or sleep */ - wrmsrl(MSR_VIA_BCR2, bcr2.val); - /* Invoke transition */ - ACPI_FLUSH_CPU_CACHE(); - halt(); - - /* Disable software clock multiplier */ - local_irq_disable(); - rdmsrl(MSR_VIA_BCR2, bcr2.val); - bcr2.bits.ESOFTBF = 0; - wrmsrl(MSR_VIA_BCR2, bcr2.val); -} - -/* For processor with Longhaul MSR */ - -static void do_powersaver(int cx_address, unsigned int mults_index, - unsigned int dir) -{ - union msr_longhaul longhaul; - u32 t; - - rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); - /* Setup new frequency */ - if (!revid_errata) - longhaul.bits.RevisionKey = longhaul.bits.RevisionID; - else - longhaul.bits.RevisionKey = 0; - longhaul.bits.SoftBusRatio = mults_index & 0xf; - longhaul.bits.SoftBusRatio4 = (mults_index & 0x10) >> 4; - /* Setup new voltage */ - if (can_scale_voltage) - longhaul.bits.SoftVID = (mults_index >> 8) & 0x1f; - /* Sync to timer tick */ - safe_halt(); - /* Raise voltage if necessary */ - if (can_scale_voltage && dir) { - longhaul.bits.EnableSoftVID = 1; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - /* Change voltage */ - if (!cx_address) { - ACPI_FLUSH_CPU_CACHE(); - halt(); - } else { - ACPI_FLUSH_CPU_CACHE(); - /* Invoke C3 */ - inb(cx_address); - /* Dummy op - must do something useless after P_LVL3 - * read */ - t = inl(acpi_gbl_FADT.xpm_timer_block.address); - } - longhaul.bits.EnableSoftVID = 0; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - } - - /* Change frequency on next halt or sleep */ - longhaul.bits.EnableSoftBusRatio = 1; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - if (!cx_address) { - ACPI_FLUSH_CPU_CACHE(); - halt(); - } else { - ACPI_FLUSH_CPU_CACHE(); - /* Invoke C3 */ - inb(cx_address); - /* Dummy op - must do something useless after P_LVL3 read */ - t = inl(acpi_gbl_FADT.xpm_timer_block.address); - } - /* Disable bus ratio bit */ - longhaul.bits.EnableSoftBusRatio = 0; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - - /* Reduce voltage if necessary */ - if (can_scale_voltage && !dir) { - longhaul.bits.EnableSoftVID = 1; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - /* Change voltage */ - if (!cx_address) { - ACPI_FLUSH_CPU_CACHE(); - halt(); - } else { - ACPI_FLUSH_CPU_CACHE(); - /* Invoke C3 */ - inb(cx_address); - /* Dummy op - must do something useless after P_LVL3 - * read */ - t = inl(acpi_gbl_FADT.xpm_timer_block.address); - } - longhaul.bits.EnableSoftVID = 0; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - } -} - -/** - * longhaul_set_cpu_frequency() - * @mults_index : bitpattern of the new multiplier. - * - * Sets a new clock ratio. - */ - -static void longhaul_setstate(unsigned int table_index) -{ - unsigned int mults_index; - int speed, mult; - struct cpufreq_freqs freqs; - unsigned long flags; - unsigned int pic1_mask, pic2_mask; - u16 bm_status = 0; - u32 bm_timeout = 1000; - unsigned int dir = 0; - - mults_index = longhaul_table[table_index].index; - /* Safety precautions */ - mult = mults[mults_index & 0x1f]; - if (mult == -1) - return; - speed = calc_speed(mult); - if ((speed > highest_speed) || (speed < lowest_speed)) - return; - /* Voltage transition before frequency transition? */ - if (can_scale_voltage && longhaul_index < table_index) - dir = 1; - - freqs.old = calc_speed(longhaul_get_cpu_mult()); - freqs.new = speed; - freqs.cpu = 0; /* longhaul.c is UP only driver */ - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - dprintk("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n", - fsb, mult/10, mult%10, print_speed(speed/1000)); -retry_loop: - preempt_disable(); - local_irq_save(flags); - - pic2_mask = inb(0xA1); - pic1_mask = inb(0x21); /* works on C3. save mask. */ - outb(0xFF, 0xA1); /* Overkill */ - outb(0xFE, 0x21); /* TMR0 only */ - - /* Wait while PCI bus is busy. */ - if (acpi_regs_addr && (longhaul_flags & USE_NORTHBRIDGE - || ((pr != NULL) && pr->flags.bm_control))) { - bm_status = inw(acpi_regs_addr); - bm_status &= 1 << 4; - while (bm_status && bm_timeout) { - outw(1 << 4, acpi_regs_addr); - bm_timeout--; - bm_status = inw(acpi_regs_addr); - bm_status &= 1 << 4; - } - } - - if (longhaul_flags & USE_NORTHBRIDGE) { - /* Disable AGP and PCI arbiters */ - outb(3, 0x22); - } else if ((pr != NULL) && pr->flags.bm_control) { - /* Disable bus master arbitration */ - acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1); - } - switch (longhaul_version) { - - /* - * Longhaul v1. (Samuel[C5A] and Samuel2 stepping 0[C5B]) - * Software controlled multipliers only. - */ - case TYPE_LONGHAUL_V1: - do_longhaul1(mults_index); - break; - - /* - * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5B] and Ezra [C5C] - * - * Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N]) - * Nehemiah can do FSB scaling too, but this has never been proven - * to work in practice. - */ - case TYPE_LONGHAUL_V2: - case TYPE_POWERSAVER: - if (longhaul_flags & USE_ACPI_C3) { - /* Don't allow wakeup */ - acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, 0); - do_powersaver(cx->address, mults_index, dir); - } else { - do_powersaver(0, mults_index, dir); - } - break; - } - - if (longhaul_flags & USE_NORTHBRIDGE) { - /* Enable arbiters */ - outb(0, 0x22); - } else if ((pr != NULL) && pr->flags.bm_control) { - /* Enable bus master arbitration */ - acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0); - } - outb(pic2_mask, 0xA1); /* restore mask */ - outb(pic1_mask, 0x21); - - local_irq_restore(flags); - preempt_enable(); - - freqs.new = calc_speed(longhaul_get_cpu_mult()); - /* Check if requested frequency is set. */ - if (unlikely(freqs.new != speed)) { - printk(KERN_INFO PFX "Failed to set requested frequency!\n"); - /* Revision ID = 1 but processor is expecting revision key - * equal to 0. Jumpers at the bottom of processor will change - * multiplier and FSB, but will not change bits in Longhaul - * MSR nor enable voltage scaling. */ - if (!revid_errata) { - printk(KERN_INFO PFX "Enabling \"Ignore Revision ID\" " - "option.\n"); - revid_errata = 1; - msleep(200); - goto retry_loop; - } - /* Why ACPI C3 sometimes doesn't work is a mystery for me. - * But it does happen. Processor is entering ACPI C3 state, - * but it doesn't change frequency. I tried poking various - * bits in northbridge registers, but without success. */ - if (longhaul_flags & USE_ACPI_C3) { - printk(KERN_INFO PFX "Disabling ACPI C3 support.\n"); - longhaul_flags &= ~USE_ACPI_C3; - if (revid_errata) { - printk(KERN_INFO PFX "Disabling \"Ignore " - "Revision ID\" option.\n"); - revid_errata = 0; - } - msleep(200); - goto retry_loop; - } - /* This shouldn't happen. Longhaul ver. 2 was reported not - * working on processors without voltage scaling, but with - * RevID = 1. RevID errata will make things right. Just - * to be 100% sure. */ - if (longhaul_version == TYPE_LONGHAUL_V2) { - printk(KERN_INFO PFX "Switching to Longhaul ver. 1\n"); - longhaul_version = TYPE_LONGHAUL_V1; - msleep(200); - goto retry_loop; - } - } - /* Report true CPU frequency */ - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - if (!bm_timeout) - printk(KERN_INFO PFX "Warning: Timeout while waiting for " - "idle PCI bus.\n"); -} - -/* - * Centaur decided to make life a little more tricky. - * Only longhaul v1 is allowed to read EBLCR BSEL[0:1]. - * Samuel2 and above have to try and guess what the FSB is. - * We do this by assuming we booted at maximum multiplier, and interpolate - * between that value multiplied by possible FSBs and cpu_mhz which - * was calculated at boot time. Really ugly, but no other way to do this. - */ - -#define ROUNDING 0xf - -static int guess_fsb(int mult) -{ - int speed = cpu_khz / 1000; - int i; - int speeds[] = { 666, 1000, 1333, 2000 }; - int f_max, f_min; - - for (i = 0; i < 4; i++) { - f_max = ((speeds[i] * mult) + 50) / 100; - f_max += (ROUNDING / 2); - f_min = f_max - ROUNDING; - if ((speed <= f_max) && (speed >= f_min)) - return speeds[i] / 10; - } - return 0; -} - - -static int __cpuinit longhaul_get_ranges(void) -{ - unsigned int i, j, k = 0; - unsigned int ratio; - int mult; - - /* Get current frequency */ - mult = longhaul_get_cpu_mult(); - if (mult == -1) { - printk(KERN_INFO PFX "Invalid (reserved) multiplier!\n"); - return -EINVAL; - } - fsb = guess_fsb(mult); - if (fsb == 0) { - printk(KERN_INFO PFX "Invalid (reserved) FSB!\n"); - return -EINVAL; - } - /* Get max multiplier - as we always did. - * Longhaul MSR is useful only when voltage scaling is enabled. - * C3 is booting at max anyway. */ - maxmult = mult; - /* Get min multiplier */ - switch (cpu_model) { - case CPU_NEHEMIAH: - minmult = 50; - break; - case CPU_NEHEMIAH_C: - minmult = 40; - break; - default: - minmult = 30; - break; - } - - dprintk("MinMult:%d.%dx MaxMult:%d.%dx\n", - minmult/10, minmult%10, maxmult/10, maxmult%10); - - highest_speed = calc_speed(maxmult); - lowest_speed = calc_speed(minmult); - dprintk("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb, - print_speed(lowest_speed/1000), - print_speed(highest_speed/1000)); - - if (lowest_speed == highest_speed) { - printk(KERN_INFO PFX "highestspeed == lowest, aborting.\n"); - return -EINVAL; - } - if (lowest_speed > highest_speed) { - printk(KERN_INFO PFX "nonsense! lowest (%d > %d) !\n", - lowest_speed, highest_speed); - return -EINVAL; - } - - longhaul_table = kmalloc((numscales + 1) * sizeof(*longhaul_table), - GFP_KERNEL); - if (!longhaul_table) - return -ENOMEM; - - for (j = 0; j < numscales; j++) { - ratio = mults[j]; - if (ratio == -1) - continue; - if (ratio > maxmult || ratio < minmult) - continue; - longhaul_table[k].frequency = calc_speed(ratio); - longhaul_table[k].index = j; - k++; - } - if (k <= 1) { - kfree(longhaul_table); - return -ENODEV; - } - /* Sort */ - for (j = 0; j < k - 1; j++) { - unsigned int min_f, min_i; - min_f = longhaul_table[j].frequency; - min_i = j; - for (i = j + 1; i < k; i++) { - if (longhaul_table[i].frequency < min_f) { - min_f = longhaul_table[i].frequency; - min_i = i; - } - } - if (min_i != j) { - swap(longhaul_table[j].frequency, - longhaul_table[min_i].frequency); - swap(longhaul_table[j].index, - longhaul_table[min_i].index); - } - } - - longhaul_table[k].frequency = CPUFREQ_TABLE_END; - - /* Find index we are running on */ - for (j = 0; j < k; j++) { - if (mults[longhaul_table[j].index & 0x1f] == mult) { - longhaul_index = j; - break; - } - } - return 0; -} - - -static void __cpuinit longhaul_setup_voltagescaling(void) -{ - union msr_longhaul longhaul; - struct mV_pos minvid, maxvid, vid; - unsigned int j, speed, pos, kHz_step, numvscales; - int min_vid_speed; - - rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); - if (!(longhaul.bits.RevisionID & 1)) { - printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n"); - return; - } - - if (!longhaul.bits.VRMRev) { - printk(KERN_INFO PFX "VRM 8.5\n"); - vrm_mV_table = &vrm85_mV[0]; - mV_vrm_table = &mV_vrm85[0]; - } else { - printk(KERN_INFO PFX "Mobile VRM\n"); - if (cpu_model < CPU_NEHEMIAH) - return; - vrm_mV_table = &mobilevrm_mV[0]; - mV_vrm_table = &mV_mobilevrm[0]; - } - - minvid = vrm_mV_table[longhaul.bits.MinimumVID]; - maxvid = vrm_mV_table[longhaul.bits.MaximumVID]; - - if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) { - printk(KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. " - "Voltage scaling disabled.\n", - minvid.mV/1000, minvid.mV%1000, - maxvid.mV/1000, maxvid.mV%1000); - return; - } - - if (minvid.mV == maxvid.mV) { - printk(KERN_INFO PFX "Claims to support voltage scaling but " - "min & max are both %d.%03d. " - "Voltage scaling disabled\n", - maxvid.mV/1000, maxvid.mV%1000); - return; - } - - /* How many voltage steps*/ - numvscales = maxvid.pos - minvid.pos + 1; - printk(KERN_INFO PFX - "Max VID=%d.%03d " - "Min VID=%d.%03d, " - "%d possible voltage scales\n", - maxvid.mV/1000, maxvid.mV%1000, - minvid.mV/1000, minvid.mV%1000, - numvscales); - - /* Calculate max frequency at min voltage */ - j = longhaul.bits.MinMHzBR; - if (longhaul.bits.MinMHzBR4) - j += 16; - min_vid_speed = eblcr[j]; - if (min_vid_speed == -1) - return; - switch (longhaul.bits.MinMHzFSB) { - case 0: - min_vid_speed *= 13333; - break; - case 1: - min_vid_speed *= 10000; - break; - case 3: - min_vid_speed *= 6666; - break; - default: - return; - break; - } - if (min_vid_speed >= highest_speed) - return; - /* Calculate kHz for one voltage step */ - kHz_step = (highest_speed - min_vid_speed) / numvscales; - - j = 0; - while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) { - speed = longhaul_table[j].frequency; - if (speed > min_vid_speed) - pos = (speed - min_vid_speed) / kHz_step + minvid.pos; - else - pos = minvid.pos; - longhaul_table[j].index |= mV_vrm_table[pos] << 8; - vid = vrm_mV_table[mV_vrm_table[pos]]; - printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", - speed, j, vid.mV); - j++; - } - - can_scale_voltage = 1; - printk(KERN_INFO PFX "Voltage scaling enabled.\n"); -} - - -static int longhaul_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, longhaul_table); -} - - -static int longhaul_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned int table_index = 0; - unsigned int i; - unsigned int dir = 0; - u8 vid, current_vid; - - if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, - relation, &table_index)) - return -EINVAL; - - /* Don't set same frequency again */ - if (longhaul_index == table_index) - return 0; - - if (!can_scale_voltage) - longhaul_setstate(table_index); - else { - /* On test system voltage transitions exceeding single - * step up or down were turning motherboard off. Both - * "ondemand" and "userspace" are unsafe. C7 is doing - * this in hardware, C3 is old and we need to do this - * in software. */ - i = longhaul_index; - current_vid = (longhaul_table[longhaul_index].index >> 8); - current_vid &= 0x1f; - if (table_index > longhaul_index) - dir = 1; - while (i != table_index) { - vid = (longhaul_table[i].index >> 8) & 0x1f; - if (vid != current_vid) { - longhaul_setstate(i); - current_vid = vid; - msleep(200); - } - if (dir) - i++; - else - i--; - } - longhaul_setstate(table_index); - } - longhaul_index = table_index; - return 0; -} - - -static unsigned int longhaul_get(unsigned int cpu) -{ - if (cpu) - return 0; - return calc_speed(longhaul_get_cpu_mult()); -} - -static acpi_status longhaul_walk_callback(acpi_handle obj_handle, - u32 nesting_level, - void *context, void **return_value) -{ - struct acpi_device *d; - - if (acpi_bus_get_device(obj_handle, &d)) - return 0; - - *return_value = acpi_driver_data(d); - return 1; -} - -/* VIA don't support PM2 reg, but have something similar */ -static int enable_arbiter_disable(void) -{ - struct pci_dev *dev; - int status = 1; - int reg; - u8 pci_cmd; - - /* Find PLE133 host bridge */ - reg = 0x78; - dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0, - NULL); - /* Find PM133/VT8605 host bridge */ - if (dev == NULL) - dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_8605_0, NULL); - /* Find CLE266 host bridge */ - if (dev == NULL) { - reg = 0x76; - dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_862X_0, NULL); - /* Find CN400 V-Link host bridge */ - if (dev == NULL) - dev = pci_get_device(PCI_VENDOR_ID_VIA, 0x7259, NULL); - } - if (dev != NULL) { - /* Enable access to port 0x22 */ - pci_read_config_byte(dev, reg, &pci_cmd); - if (!(pci_cmd & 1<<7)) { - pci_cmd |= 1<<7; - pci_write_config_byte(dev, reg, pci_cmd); - pci_read_config_byte(dev, reg, &pci_cmd); - if (!(pci_cmd & 1<<7)) { - printk(KERN_ERR PFX - "Can't enable access to port 0x22.\n"); - status = 0; - } - } - pci_dev_put(dev); - return status; - } - return 0; -} - -static int longhaul_setup_southbridge(void) -{ - struct pci_dev *dev; - u8 pci_cmd; - - /* Find VT8235 southbridge */ - dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL); - if (dev == NULL) - /* Find VT8237 southbridge */ - dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_8237, NULL); - if (dev != NULL) { - /* Set transition time to max */ - pci_read_config_byte(dev, 0xec, &pci_cmd); - pci_cmd &= ~(1 << 2); - pci_write_config_byte(dev, 0xec, pci_cmd); - pci_read_config_byte(dev, 0xe4, &pci_cmd); - pci_cmd &= ~(1 << 7); - pci_write_config_byte(dev, 0xe4, pci_cmd); - pci_read_config_byte(dev, 0xe5, &pci_cmd); - pci_cmd |= 1 << 7; - pci_write_config_byte(dev, 0xe5, pci_cmd); - /* Get address of ACPI registers block*/ - pci_read_config_byte(dev, 0x81, &pci_cmd); - if (pci_cmd & 1 << 7) { - pci_read_config_dword(dev, 0x88, &acpi_regs_addr); - acpi_regs_addr &= 0xff00; - printk(KERN_INFO PFX "ACPI I/O at 0x%x\n", - acpi_regs_addr); - } - - pci_dev_put(dev); - return 1; - } - return 0; -} - -static int __cpuinit longhaul_cpu_init(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - char *cpuname = NULL; - int ret; - u32 lo, hi; - - /* Check what we have on this motherboard */ - switch (c->x86_model) { - case 6: - cpu_model = CPU_SAMUEL; - cpuname = "C3 'Samuel' [C5A]"; - longhaul_version = TYPE_LONGHAUL_V1; - memcpy(mults, samuel1_mults, sizeof(samuel1_mults)); - memcpy(eblcr, samuel1_eblcr, sizeof(samuel1_eblcr)); - break; - - case 7: - switch (c->x86_mask) { - case 0: - longhaul_version = TYPE_LONGHAUL_V1; - cpu_model = CPU_SAMUEL2; - cpuname = "C3 'Samuel 2' [C5B]"; - /* Note, this is not a typo, early Samuel2's had - * Samuel1 ratios. */ - memcpy(mults, samuel1_mults, sizeof(samuel1_mults)); - memcpy(eblcr, samuel2_eblcr, sizeof(samuel2_eblcr)); - break; - case 1 ... 15: - longhaul_version = TYPE_LONGHAUL_V2; - if (c->x86_mask < 8) { - cpu_model = CPU_SAMUEL2; - cpuname = "C3 'Samuel 2' [C5B]"; - } else { - cpu_model = CPU_EZRA; - cpuname = "C3 'Ezra' [C5C]"; - } - memcpy(mults, ezra_mults, sizeof(ezra_mults)); - memcpy(eblcr, ezra_eblcr, sizeof(ezra_eblcr)); - break; - } - break; - - case 8: - cpu_model = CPU_EZRA_T; - cpuname = "C3 'Ezra-T' [C5M]"; - longhaul_version = TYPE_POWERSAVER; - numscales = 32; - memcpy(mults, ezrat_mults, sizeof(ezrat_mults)); - memcpy(eblcr, ezrat_eblcr, sizeof(ezrat_eblcr)); - break; - - case 9: - longhaul_version = TYPE_POWERSAVER; - numscales = 32; - memcpy(mults, nehemiah_mults, sizeof(nehemiah_mults)); - memcpy(eblcr, nehemiah_eblcr, sizeof(nehemiah_eblcr)); - switch (c->x86_mask) { - case 0 ... 1: - cpu_model = CPU_NEHEMIAH; - cpuname = "C3 'Nehemiah A' [C5XLOE]"; - break; - case 2 ... 4: - cpu_model = CPU_NEHEMIAH; - cpuname = "C3 'Nehemiah B' [C5XLOH]"; - break; - case 5 ... 15: - cpu_model = CPU_NEHEMIAH_C; - cpuname = "C3 'Nehemiah C' [C5P]"; - break; - } - break; - - default: - cpuname = "Unknown"; - break; - } - /* Check Longhaul ver. 2 */ - if (longhaul_version == TYPE_LONGHAUL_V2) { - rdmsr(MSR_VIA_LONGHAUL, lo, hi); - if (lo == 0 && hi == 0) - /* Looks like MSR isn't present */ - longhaul_version = TYPE_LONGHAUL_V1; - } - - printk(KERN_INFO PFX "VIA %s CPU detected. ", cpuname); - switch (longhaul_version) { - case TYPE_LONGHAUL_V1: - case TYPE_LONGHAUL_V2: - printk(KERN_CONT "Longhaul v%d supported.\n", longhaul_version); - break; - case TYPE_POWERSAVER: - printk(KERN_CONT "Powersaver supported.\n"); - break; - }; - - /* Doesn't hurt */ - longhaul_setup_southbridge(); - - /* Find ACPI data for processor */ - acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, - ACPI_UINT32_MAX, &longhaul_walk_callback, NULL, - NULL, (void *)&pr); - - /* Check ACPI support for C3 state */ - if (pr != NULL && longhaul_version == TYPE_POWERSAVER) { - cx = &pr->power.states[ACPI_STATE_C3]; - if (cx->address > 0 && cx->latency <= 1000) - longhaul_flags |= USE_ACPI_C3; - } - /* Disable if it isn't working */ - if (disable_acpi_c3) - longhaul_flags &= ~USE_ACPI_C3; - /* Check if northbridge is friendly */ - if (enable_arbiter_disable()) - longhaul_flags |= USE_NORTHBRIDGE; - - /* Check ACPI support for bus master arbiter disable */ - if (!(longhaul_flags & USE_ACPI_C3 - || longhaul_flags & USE_NORTHBRIDGE) - && ((pr == NULL) || !(pr->flags.bm_control))) { - printk(KERN_ERR PFX - "No ACPI support. Unsupported northbridge.\n"); - return -ENODEV; - } - - if (longhaul_flags & USE_NORTHBRIDGE) - printk(KERN_INFO PFX "Using northbridge support.\n"); - if (longhaul_flags & USE_ACPI_C3) - printk(KERN_INFO PFX "Using ACPI support.\n"); - - ret = longhaul_get_ranges(); - if (ret != 0) - return ret; - - if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0)) - longhaul_setup_voltagescaling(); - - policy->cpuinfo.transition_latency = 200000; /* nsec */ - policy->cur = calc_speed(longhaul_get_cpu_mult()); - - ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table); - if (ret) - return ret; - - cpufreq_frequency_table_get_attr(longhaul_table, policy->cpu); - - return 0; -} - -static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static struct freq_attr *longhaul_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver longhaul_driver = { - .verify = longhaul_verify, - .target = longhaul_target, - .get = longhaul_get, - .init = longhaul_cpu_init, - .exit = __devexit_p(longhaul_cpu_exit), - .name = "longhaul", - .owner = THIS_MODULE, - .attr = longhaul_attr, -}; - - -static int __init longhaul_init(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - - if (c->x86_vendor != X86_VENDOR_CENTAUR || c->x86 != 6) - return -ENODEV; - -#ifdef CONFIG_SMP - if (num_online_cpus() > 1) { - printk(KERN_ERR PFX "More than 1 CPU detected, " - "longhaul disabled.\n"); - return -ENODEV; - } -#endif -#ifdef CONFIG_X86_IO_APIC - if (cpu_has_apic) { - printk(KERN_ERR PFX "APIC detected. Longhaul is currently " - "broken in this configuration.\n"); - return -ENODEV; - } -#endif - switch (c->x86_model) { - case 6 ... 9: - return cpufreq_register_driver(&longhaul_driver); - case 10: - printk(KERN_ERR PFX "Use acpi-cpufreq driver for VIA C7\n"); - default: - ; - } - - return -ENODEV; -} - - -static void __exit longhaul_exit(void) -{ - int i; - - for (i = 0; i < numscales; i++) { - if (mults[i] == maxmult) { - longhaul_setstate(i); - break; - } - } - - cpufreq_unregister_driver(&longhaul_driver); - kfree(longhaul_table); -} - -/* Even if BIOS is exporting ACPI C3 state, and it is used - * with success when CPU is idle, this state doesn't - * trigger frequency transition in some cases. */ -module_param(disable_acpi_c3, int, 0644); -MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support"); -/* Change CPU voltage with frequency. Very useful to save - * power, but most VIA C3 processors aren't supporting it. */ -module_param(scale_voltage, int, 0644); -MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor"); -/* Force revision key to 0 for processors which doesn't - * support voltage scaling, but are introducing itself as - * such. */ -module_param(revid_errata, int, 0644); -MODULE_PARM_DESC(revid_errata, "Ignore CPU Revision ID"); - -MODULE_AUTHOR("Dave Jones <davej@redhat.com>"); -MODULE_DESCRIPTION("Longhaul driver for VIA Cyrix processors."); -MODULE_LICENSE("GPL"); - -late_initcall(longhaul_init); -module_exit(longhaul_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.h b/arch/x86/kernel/cpu/cpufreq/longhaul.h deleted file mode 100644 index cbf48fbca88..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/longhaul.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - * longhaul.h - * (C) 2003 Dave Jones. - * - * Licensed under the terms of the GNU GPL License version 2. - * - * VIA-specific information - */ - -union msr_bcr2 { - struct { - unsigned Reseved:19, // 18:0 - ESOFTBF:1, // 19 - Reserved2:3, // 22:20 - CLOCKMUL:4, // 26:23 - Reserved3:5; // 31:27 - } bits; - unsigned long val; -}; - -union msr_longhaul { - struct { - unsigned RevisionID:4, // 3:0 - RevisionKey:4, // 7:4 - EnableSoftBusRatio:1, // 8 - EnableSoftVID:1, // 9 - EnableSoftBSEL:1, // 10 - Reserved:3, // 11:13 - SoftBusRatio4:1, // 14 - VRMRev:1, // 15 - SoftBusRatio:4, // 19:16 - SoftVID:5, // 24:20 - Reserved2:3, // 27:25 - SoftBSEL:2, // 29:28 - Reserved3:2, // 31:30 - MaxMHzBR:4, // 35:32 - MaximumVID:5, // 40:36 - MaxMHzFSB:2, // 42:41 - MaxMHzBR4:1, // 43 - Reserved4:4, // 47:44 - MinMHzBR:4, // 51:48 - MinimumVID:5, // 56:52 - MinMHzFSB:2, // 58:57 - MinMHzBR4:1, // 59 - Reserved5:4; // 63:60 - } bits; - unsigned long long val; -}; - -/* - * Clock ratio tables. Div/Mod by 10 to get ratio. - * The eblcr values specify the ratio read from the CPU. - * The mults values specify what to write to the CPU. - */ - -/* - * VIA C3 Samuel 1 & Samuel 2 (stepping 0) - */ -static const int __cpuinitdata samuel1_mults[16] = { - -1, /* 0000 -> RESERVED */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - -1, /* 0011 -> RESERVED */ - -1, /* 0100 -> RESERVED */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 55, /* 0111 -> 5.5x */ - 60, /* 1000 -> 6.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 50, /* 1011 -> 5.0x */ - 65, /* 1100 -> 6.5x */ - 75, /* 1101 -> 7.5x */ - -1, /* 1110 -> RESERVED */ - -1, /* 1111 -> RESERVED */ -}; - -static const int __cpuinitdata samuel1_eblcr[16] = { - 50, /* 0000 -> RESERVED */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - -1, /* 0011 -> RESERVED */ - 55, /* 0100 -> 5.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - -1, /* 0111 -> RESERVED */ - -1, /* 1000 -> RESERVED */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - -1, /* 1100 -> RESERVED */ - 75, /* 1101 -> 7.5x */ - -1, /* 1110 -> RESERVED */ - 65, /* 1111 -> 6.5x */ -}; - -/* - * VIA C3 Samuel2 Stepping 1->15 - */ -static const int __cpuinitdata samuel2_eblcr[16] = { - 50, /* 0000 -> 5.0x */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - 100, /* 0011 -> 10.0x */ - 55, /* 0100 -> 5.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 110, /* 0111 -> 11.0x */ - 90, /* 1000 -> 9.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - 120, /* 1100 -> 12.0x */ - 75, /* 1101 -> 7.5x */ - 130, /* 1110 -> 13.0x */ - 65, /* 1111 -> 6.5x */ -}; - -/* - * VIA C3 Ezra - */ -static const int __cpuinitdata ezra_mults[16] = { - 100, /* 0000 -> 10.0x */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - 90, /* 0011 -> 9.0x */ - 95, /* 0100 -> 9.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 55, /* 0111 -> 5.5x */ - 60, /* 1000 -> 6.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 50, /* 1011 -> 5.0x */ - 65, /* 1100 -> 6.5x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 120, /* 1111 -> 12.0x */ -}; - -static const int __cpuinitdata ezra_eblcr[16] = { - 50, /* 0000 -> 5.0x */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - 100, /* 0011 -> 10.0x */ - 55, /* 0100 -> 5.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 95, /* 0111 -> 9.5x */ - 90, /* 1000 -> 9.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - 120, /* 1100 -> 12.0x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 65, /* 1111 -> 6.5x */ -}; - -/* - * VIA C3 (Ezra-T) [C5M]. - */ -static const int __cpuinitdata ezrat_mults[32] = { - 100, /* 0000 -> 10.0x */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - 90, /* 0011 -> 9.0x */ - 95, /* 0100 -> 9.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 55, /* 0111 -> 5.5x */ - 60, /* 1000 -> 6.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 50, /* 1011 -> 5.0x */ - 65, /* 1100 -> 6.5x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 120, /* 1111 -> 12.0x */ - - -1, /* 0000 -> RESERVED (10.0x) */ - 110, /* 0001 -> 11.0x */ - -1, /* 0010 -> 12.0x */ - -1, /* 0011 -> RESERVED (9.0x)*/ - 105, /* 0100 -> 10.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 135, /* 0111 -> 13.5x */ - 140, /* 1000 -> 14.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 130, /* 1011 -> 13.0x */ - 145, /* 1100 -> 14.5x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - -1, /* 1111 -> RESERVED (12.0x) */ -}; - -static const int __cpuinitdata ezrat_eblcr[32] = { - 50, /* 0000 -> 5.0x */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - 100, /* 0011 -> 10.0x */ - 55, /* 0100 -> 5.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 95, /* 0111 -> 9.5x */ - 90, /* 1000 -> 9.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - 120, /* 1100 -> 12.0x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 65, /* 1111 -> 6.5x */ - - -1, /* 0000 -> RESERVED (9.0x) */ - 110, /* 0001 -> 11.0x */ - 120, /* 0010 -> 12.0x */ - -1, /* 0011 -> RESERVED (10.0x)*/ - 135, /* 0100 -> 13.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 105, /* 0111 -> 10.5x */ - 130, /* 1000 -> 13.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 140, /* 1011 -> 14.0x */ - -1, /* 1100 -> RESERVED (12.0x) */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - 145, /* 1111 -> 14.5x */ -}; - -/* - * VIA C3 Nehemiah */ - -static const int __cpuinitdata nehemiah_mults[32] = { - 100, /* 0000 -> 10.0x */ - -1, /* 0001 -> 16.0x */ - 40, /* 0010 -> 4.0x */ - 90, /* 0011 -> 9.0x */ - 95, /* 0100 -> 9.5x */ - -1, /* 0101 -> RESERVED */ - 45, /* 0110 -> 4.5x */ - 55, /* 0111 -> 5.5x */ - 60, /* 1000 -> 6.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 50, /* 1011 -> 5.0x */ - 65, /* 1100 -> 6.5x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 120, /* 1111 -> 12.0x */ - -1, /* 0000 -> 10.0x */ - 110, /* 0001 -> 11.0x */ - -1, /* 0010 -> 12.0x */ - -1, /* 0011 -> 9.0x */ - 105, /* 0100 -> 10.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 135, /* 0111 -> 13.5x */ - 140, /* 1000 -> 14.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 130, /* 1011 -> 13.0x */ - 145, /* 1100 -> 14.5x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - -1, /* 1111 -> 12.0x */ -}; - -static const int __cpuinitdata nehemiah_eblcr[32] = { - 50, /* 0000 -> 5.0x */ - 160, /* 0001 -> 16.0x */ - 40, /* 0010 -> 4.0x */ - 100, /* 0011 -> 10.0x */ - 55, /* 0100 -> 5.5x */ - -1, /* 0101 -> RESERVED */ - 45, /* 0110 -> 4.5x */ - 95, /* 0111 -> 9.5x */ - 90, /* 1000 -> 9.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - 120, /* 1100 -> 12.0x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 65, /* 1111 -> 6.5x */ - 90, /* 0000 -> 9.0x */ - 110, /* 0001 -> 11.0x */ - 120, /* 0010 -> 12.0x */ - 100, /* 0011 -> 10.0x */ - 135, /* 0100 -> 13.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 105, /* 0111 -> 10.5x */ - 130, /* 1000 -> 13.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 140, /* 1011 -> 14.0x */ - 120, /* 1100 -> 12.0x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - 145 /* 1111 -> 14.5x */ -}; - -/* - * Voltage scales. Div/Mod by 1000 to get actual voltage. - * Which scale to use depends on the VRM type in use. - */ - -struct mV_pos { - unsigned short mV; - unsigned short pos; -}; - -static const struct mV_pos __cpuinitdata vrm85_mV[32] = { - {1250, 8}, {1200, 6}, {1150, 4}, {1100, 2}, - {1050, 0}, {1800, 30}, {1750, 28}, {1700, 26}, - {1650, 24}, {1600, 22}, {1550, 20}, {1500, 18}, - {1450, 16}, {1400, 14}, {1350, 12}, {1300, 10}, - {1275, 9}, {1225, 7}, {1175, 5}, {1125, 3}, - {1075, 1}, {1825, 31}, {1775, 29}, {1725, 27}, - {1675, 25}, {1625, 23}, {1575, 21}, {1525, 19}, - {1475, 17}, {1425, 15}, {1375, 13}, {1325, 11} -}; - -static const unsigned char __cpuinitdata mV_vrm85[32] = { - 0x04, 0x14, 0x03, 0x13, 0x02, 0x12, 0x01, 0x11, - 0x00, 0x10, 0x0f, 0x1f, 0x0e, 0x1e, 0x0d, 0x1d, - 0x0c, 0x1c, 0x0b, 0x1b, 0x0a, 0x1a, 0x09, 0x19, - 0x08, 0x18, 0x07, 0x17, 0x06, 0x16, 0x05, 0x15 -}; - -static const struct mV_pos __cpuinitdata mobilevrm_mV[32] = { - {1750, 31}, {1700, 30}, {1650, 29}, {1600, 28}, - {1550, 27}, {1500, 26}, {1450, 25}, {1400, 24}, - {1350, 23}, {1300, 22}, {1250, 21}, {1200, 20}, - {1150, 19}, {1100, 18}, {1050, 17}, {1000, 16}, - {975, 15}, {950, 14}, {925, 13}, {900, 12}, - {875, 11}, {850, 10}, {825, 9}, {800, 8}, - {775, 7}, {750, 6}, {725, 5}, {700, 4}, - {675, 3}, {650, 2}, {625, 1}, {600, 0} -}; - -static const unsigned char __cpuinitdata mV_mobilevrm[32] = { - 0x1f, 0x1e, 0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, - 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x10, - 0x0f, 0x0e, 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, - 0x07, 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00 -}; - diff --git a/arch/x86/kernel/cpu/cpufreq/longrun.c b/arch/x86/kernel/cpu/cpufreq/longrun.c deleted file mode 100644 index d9f51367666..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/longrun.c +++ /dev/null @@ -1,327 +0,0 @@ -/* - * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> - * - * Licensed under the terms of the GNU GPL License version 2. - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/timex.h> - -#include <asm/msr.h> -#include <asm/processor.h> - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "longrun", msg) - -static struct cpufreq_driver longrun_driver; - -/** - * longrun_{low,high}_freq is needed for the conversion of cpufreq kHz - * values into per cent values. In TMTA microcode, the following is valid: - * performance_pctg = (current_freq - low_freq)/(high_freq - low_freq) - */ -static unsigned int longrun_low_freq, longrun_high_freq; - - -/** - * longrun_get_policy - get the current LongRun policy - * @policy: struct cpufreq_policy where current policy is written into - * - * Reads the current LongRun policy by access to MSR_TMTA_LONGRUN_FLAGS - * and MSR_TMTA_LONGRUN_CTRL - */ -static void __cpuinit longrun_get_policy(struct cpufreq_policy *policy) -{ - u32 msr_lo, msr_hi; - - rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); - dprintk("longrun flags are %x - %x\n", msr_lo, msr_hi); - if (msr_lo & 0x01) - policy->policy = CPUFREQ_POLICY_PERFORMANCE; - else - policy->policy = CPUFREQ_POLICY_POWERSAVE; - - rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); - dprintk("longrun ctrl is %x - %x\n", msr_lo, msr_hi); - msr_lo &= 0x0000007F; - msr_hi &= 0x0000007F; - - if (longrun_high_freq <= longrun_low_freq) { - /* Assume degenerate Longrun table */ - policy->min = policy->max = longrun_high_freq; - } else { - policy->min = longrun_low_freq + msr_lo * - ((longrun_high_freq - longrun_low_freq) / 100); - policy->max = longrun_low_freq + msr_hi * - ((longrun_high_freq - longrun_low_freq) / 100); - } - policy->cpu = 0; -} - - -/** - * longrun_set_policy - sets a new CPUFreq policy - * @policy: new policy - * - * Sets a new CPUFreq policy on LongRun-capable processors. This function - * has to be called with cpufreq_driver locked. - */ -static int longrun_set_policy(struct cpufreq_policy *policy) -{ - u32 msr_lo, msr_hi; - u32 pctg_lo, pctg_hi; - - if (!policy) - return -EINVAL; - - if (longrun_high_freq <= longrun_low_freq) { - /* Assume degenerate Longrun table */ - pctg_lo = pctg_hi = 100; - } else { - pctg_lo = (policy->min - longrun_low_freq) / - ((longrun_high_freq - longrun_low_freq) / 100); - pctg_hi = (policy->max - longrun_low_freq) / - ((longrun_high_freq - longrun_low_freq) / 100); - } - - if (pctg_hi > 100) - pctg_hi = 100; - if (pctg_lo > pctg_hi) - pctg_lo = pctg_hi; - - /* performance or economy mode */ - rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); - msr_lo &= 0xFFFFFFFE; - switch (policy->policy) { - case CPUFREQ_POLICY_PERFORMANCE: - msr_lo |= 0x00000001; - break; - case CPUFREQ_POLICY_POWERSAVE: - break; - } - wrmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); - - /* lower and upper boundary */ - rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); - msr_lo &= 0xFFFFFF80; - msr_hi &= 0xFFFFFF80; - msr_lo |= pctg_lo; - msr_hi |= pctg_hi; - wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); - - return 0; -} - - -/** - * longrun_verify_poliy - verifies a new CPUFreq policy - * @policy: the policy to verify - * - * Validates a new CPUFreq policy. This function has to be called with - * cpufreq_driver locked. - */ -static int longrun_verify_policy(struct cpufreq_policy *policy) -{ - if (!policy) - return -EINVAL; - - policy->cpu = 0; - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - - if ((policy->policy != CPUFREQ_POLICY_POWERSAVE) && - (policy->policy != CPUFREQ_POLICY_PERFORMANCE)) - return -EINVAL; - - return 0; -} - -static unsigned int longrun_get(unsigned int cpu) -{ - u32 eax, ebx, ecx, edx; - - if (cpu) - return 0; - - cpuid(0x80860007, &eax, &ebx, &ecx, &edx); - dprintk("cpuid eax is %u\n", eax); - - return eax * 1000; -} - -/** - * longrun_determine_freqs - determines the lowest and highest possible core frequency - * @low_freq: an int to put the lowest frequency into - * @high_freq: an int to put the highest frequency into - * - * Determines the lowest and highest possible core frequencies on this CPU. - * This is necessary to calculate the performance percentage according to - * TMTA rules: - * performance_pctg = (target_freq - low_freq)/(high_freq - low_freq) - */ -static int __cpuinit longrun_determine_freqs(unsigned int *low_freq, - unsigned int *high_freq) -{ - u32 msr_lo, msr_hi; - u32 save_lo, save_hi; - u32 eax, ebx, ecx, edx; - u32 try_hi; - struct cpuinfo_x86 *c = &cpu_data(0); - - if (!low_freq || !high_freq) - return -EINVAL; - - if (cpu_has(c, X86_FEATURE_LRTI)) { - /* if the LongRun Table Interface is present, the - * detection is a bit easier: - * For minimum frequency, read out the maximum - * level (msr_hi), write that into "currently - * selected level", and read out the frequency. - * For maximum frequency, read out level zero. - */ - /* minimum */ - rdmsr(MSR_TMTA_LRTI_READOUT, msr_lo, msr_hi); - wrmsr(MSR_TMTA_LRTI_READOUT, msr_hi, msr_hi); - rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi); - *low_freq = msr_lo * 1000; /* to kHz */ - - /* maximum */ - wrmsr(MSR_TMTA_LRTI_READOUT, 0, msr_hi); - rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi); - *high_freq = msr_lo * 1000; /* to kHz */ - - dprintk("longrun table interface told %u - %u kHz\n", - *low_freq, *high_freq); - - if (*low_freq > *high_freq) - *low_freq = *high_freq; - return 0; - } - - /* set the upper border to the value determined during TSC init */ - *high_freq = (cpu_khz / 1000); - *high_freq = *high_freq * 1000; - dprintk("high frequency is %u kHz\n", *high_freq); - - /* get current borders */ - rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); - save_lo = msr_lo & 0x0000007F; - save_hi = msr_hi & 0x0000007F; - - /* if current perf_pctg is larger than 90%, we need to decrease the - * upper limit to make the calculation more accurate. - */ - cpuid(0x80860007, &eax, &ebx, &ecx, &edx); - /* try decreasing in 10% steps, some processors react only - * on some barrier values */ - for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -= 10) { - /* set to 0 to try_hi perf_pctg */ - msr_lo &= 0xFFFFFF80; - msr_hi &= 0xFFFFFF80; - msr_hi |= try_hi; - wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); - - /* read out current core MHz and current perf_pctg */ - cpuid(0x80860007, &eax, &ebx, &ecx, &edx); - - /* restore values */ - wrmsr(MSR_TMTA_LONGRUN_CTRL, save_lo, save_hi); - } - dprintk("percentage is %u %%, freq is %u MHz\n", ecx, eax); - - /* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq) - * eqals - * low_freq * (1 - perf_pctg) = (cur_freq - high_freq * perf_pctg) - * - * high_freq * perf_pctg is stored tempoarily into "ebx". - */ - ebx = (((cpu_khz / 1000) * ecx) / 100); /* to MHz */ - - if ((ecx > 95) || (ecx == 0) || (eax < ebx)) - return -EIO; - - edx = ((eax - ebx) * 100) / (100 - ecx); - *low_freq = edx * 1000; /* back to kHz */ - - dprintk("low frequency is %u kHz\n", *low_freq); - - if (*low_freq > *high_freq) - *low_freq = *high_freq; - - return 0; -} - - -static int __cpuinit longrun_cpu_init(struct cpufreq_policy *policy) -{ - int result = 0; - - /* capability check */ - if (policy->cpu != 0) - return -ENODEV; - - /* detect low and high frequency */ - result = longrun_determine_freqs(&longrun_low_freq, &longrun_high_freq); - if (result) - return result; - - /* cpuinfo and default policy values */ - policy->cpuinfo.min_freq = longrun_low_freq; - policy->cpuinfo.max_freq = longrun_high_freq; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - longrun_get_policy(policy); - - return 0; -} - - -static struct cpufreq_driver longrun_driver = { - .flags = CPUFREQ_CONST_LOOPS, - .verify = longrun_verify_policy, - .setpolicy = longrun_set_policy, - .get = longrun_get, - .init = longrun_cpu_init, - .name = "longrun", - .owner = THIS_MODULE, -}; - - -/** - * longrun_init - initializes the Transmeta Crusoe LongRun CPUFreq driver - * - * Initializes the LongRun support. - */ -static int __init longrun_init(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - - if (c->x86_vendor != X86_VENDOR_TRANSMETA || - !cpu_has(c, X86_FEATURE_LONGRUN)) - return -ENODEV; - - return cpufreq_register_driver(&longrun_driver); -} - - -/** - * longrun_exit - unregisters LongRun support - */ -static void __exit longrun_exit(void) -{ - cpufreq_unregister_driver(&longrun_driver); -} - - -MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION("LongRun driver for Transmeta Crusoe and " - "Efficeon processors."); -MODULE_LICENSE("GPL"); - -module_init(longrun_init); -module_exit(longrun_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/mperf.c b/arch/x86/kernel/cpu/cpufreq/mperf.c deleted file mode 100644 index 911e193018a..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/mperf.c +++ /dev/null @@ -1,51 +0,0 @@ -#include <linux/kernel.h> -#include <linux/smp.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/slab.h> - -#include "mperf.h" - -static DEFINE_PER_CPU(struct aperfmperf, acfreq_old_perf); - -/* Called via smp_call_function_single(), on the target CPU */ -static void read_measured_perf_ctrs(void *_cur) -{ - struct aperfmperf *am = _cur; - - get_aperfmperf(am); -} - -/* - * Return the measured active (C0) frequency on this CPU since last call - * to this function. - * Input: cpu number - * Return: Average CPU frequency in terms of max frequency (zero on error) - * - * We use IA32_MPERF and IA32_APERF MSRs to get the measured performance - * over a period of time, while CPU is in C0 state. - * IA32_MPERF counts at the rate of max advertised frequency - * IA32_APERF counts at the rate of actual CPU frequency - * Only IA32_APERF/IA32_MPERF ratio is architecturally defined and - * no meaning should be associated with absolute values of these MSRs. - */ -unsigned int cpufreq_get_measured_perf(struct cpufreq_policy *policy, - unsigned int cpu) -{ - struct aperfmperf perf; - unsigned long ratio; - unsigned int retval; - - if (smp_call_function_single(cpu, read_measured_perf_ctrs, &perf, 1)) - return 0; - - ratio = calc_aperfmperf_ratio(&per_cpu(acfreq_old_perf, cpu), &perf); - per_cpu(acfreq_old_perf, cpu) = perf; - - retval = (policy->cpuinfo.max_freq * ratio) >> APERFMPERF_SHIFT; - - return retval; -} -EXPORT_SYMBOL_GPL(cpufreq_get_measured_perf); -MODULE_LICENSE("GPL"); diff --git a/arch/x86/kernel/cpu/cpufreq/mperf.h b/arch/x86/kernel/cpu/cpufreq/mperf.h deleted file mode 100644 index 5dbf2950dc2..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/mperf.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * (c) 2010 Advanced Micro Devices, Inc. - * Your use of this code is subject to the terms and conditions of the - * GNU general public license version 2. See "COPYING" or - * http://www.gnu.org/licenses/gpl.html - */ - -unsigned int cpufreq_get_measured_perf(struct cpufreq_policy *policy, - unsigned int cpu); diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c deleted file mode 100644 index 52c93648e49..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c +++ /dev/null @@ -1,331 +0,0 @@ -/* - * Pentium 4/Xeon CPU on demand clock modulation/speed scaling - * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> - * (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com> - * (C) 2002 Arjan van de Ven <arjanv@redhat.com> - * (C) 2002 Tora T. Engstad - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * The author(s) of this software shall not be held liable for damages - * of any nature resulting due to the use of this software. This - * software is provided AS-IS with no warranties. - * - * Date Errata Description - * 20020525 N44, O17 12.5% or 25% DC causes lockup - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/cpufreq.h> -#include <linux/cpumask.h> -#include <linux/timex.h> - -#include <asm/processor.h> -#include <asm/msr.h> -#include <asm/timer.h> - -#include "speedstep-lib.h" - -#define PFX "p4-clockmod: " -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "p4-clockmod", msg) - -/* - * Duty Cycle (3bits), note DC_DISABLE is not specified in - * intel docs i just use it to mean disable - */ -enum { - DC_RESV, DC_DFLT, DC_25PT, DC_38PT, DC_50PT, - DC_64PT, DC_75PT, DC_88PT, DC_DISABLE -}; - -#define DC_ENTRIES 8 - - -static int has_N44_O17_errata[NR_CPUS]; -static unsigned int stock_freq; -static struct cpufreq_driver p4clockmod_driver; -static unsigned int cpufreq_p4_get(unsigned int cpu); - -static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) -{ - u32 l, h; - - if (!cpu_online(cpu) || - (newstate > DC_DISABLE) || (newstate == DC_RESV)) - return -EINVAL; - - rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h); - - if (l & 0x01) - dprintk("CPU#%d currently thermal throttled\n", cpu); - - if (has_N44_O17_errata[cpu] && - (newstate == DC_25PT || newstate == DC_DFLT)) - newstate = DC_38PT; - - rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); - if (newstate == DC_DISABLE) { - dprintk("CPU#%d disabling modulation\n", cpu); - wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l & ~(1<<4), h); - } else { - dprintk("CPU#%d setting duty cycle to %d%%\n", - cpu, ((125 * newstate) / 10)); - /* bits 63 - 5 : reserved - * bit 4 : enable/disable - * bits 3-1 : duty cycle - * bit 0 : reserved - */ - l = (l & ~14); - l = l | (1<<4) | ((newstate & 0x7)<<1); - wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l, h); - } - - return 0; -} - - -static struct cpufreq_frequency_table p4clockmod_table[] = { - {DC_RESV, CPUFREQ_ENTRY_INVALID}, - {DC_DFLT, 0}, - {DC_25PT, 0}, - {DC_38PT, 0}, - {DC_50PT, 0}, - {DC_64PT, 0}, - {DC_75PT, 0}, - {DC_88PT, 0}, - {DC_DISABLE, 0}, - {DC_RESV, CPUFREQ_TABLE_END}, -}; - - -static int cpufreq_p4_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = DC_RESV; - struct cpufreq_freqs freqs; - int i; - - if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], - target_freq, relation, &newstate)) - return -EINVAL; - - freqs.old = cpufreq_p4_get(policy->cpu); - freqs.new = stock_freq * p4clockmod_table[newstate].index / 8; - - if (freqs.new == freqs.old) - return 0; - - /* notifiers */ - for_each_cpu(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - } - - /* run on each logical CPU, - * see section 13.15.3 of IA32 Intel Architecture Software - * Developer's Manual, Volume 3 - */ - for_each_cpu(i, policy->cpus) - cpufreq_p4_setdc(i, p4clockmod_table[newstate].index); - - /* notifiers */ - for_each_cpu(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - - return 0; -} - - -static int cpufreq_p4_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &p4clockmod_table[0]); -} - - -static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) -{ - if (c->x86 == 0x06) { - if (cpu_has(c, X86_FEATURE_EST)) - printk_once(KERN_WARNING PFX "Warning: EST-capable " - "CPU detected. The acpi-cpufreq module offers " - "voltage scaling in addition to frequency " - "scaling. You should use that instead of " - "p4-clockmod, if possible.\n"); - switch (c->x86_model) { - case 0x0E: /* Core */ - case 0x0F: /* Core Duo */ - case 0x16: /* Celeron Core */ - case 0x1C: /* Atom */ - p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; - return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE); - case 0x0D: /* Pentium M (Dothan) */ - p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; - /* fall through */ - case 0x09: /* Pentium M (Banias) */ - return speedstep_get_frequency(SPEEDSTEP_CPU_PM); - } - } - - if (c->x86 != 0xF) - return 0; - - /* on P-4s, the TSC runs with constant frequency independent whether - * throttling is active or not. */ - p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; - - if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) { - printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. " - "The speedstep-ich or acpi cpufreq modules offer " - "voltage scaling in addition of frequency scaling. " - "You should use either one instead of p4-clockmod, " - "if possible.\n"); - return speedstep_get_frequency(SPEEDSTEP_CPU_P4M); - } - - return speedstep_get_frequency(SPEEDSTEP_CPU_P4D); -} - - - -static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *c = &cpu_data(policy->cpu); - int cpuid = 0; - unsigned int i; - -#ifdef CONFIG_SMP - cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu)); -#endif - - /* Errata workaround */ - cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_mask; - switch (cpuid) { - case 0x0f07: - case 0x0f0a: - case 0x0f11: - case 0x0f12: - has_N44_O17_errata[policy->cpu] = 1; - dprintk("has errata -- disabling low frequencies\n"); - } - - if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4D && - c->x86_model < 2) { - /* switch to maximum frequency and measure result */ - cpufreq_p4_setdc(policy->cpu, DC_DISABLE); - recalibrate_cpu_khz(); - } - /* get max frequency */ - stock_freq = cpufreq_p4_get_frequency(c); - if (!stock_freq) - return -EINVAL; - - /* table init */ - for (i = 1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) { - if ((i < 2) && (has_N44_O17_errata[policy->cpu])) - p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID; - else - p4clockmod_table[i].frequency = (stock_freq * i)/8; - } - cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu); - - /* cpuinfo and default policy values */ - - /* the transition latency is set to be 1 higher than the maximum - * transition latency of the ondemand governor */ - policy->cpuinfo.transition_latency = 10000001; - policy->cur = stock_freq; - - return cpufreq_frequency_table_cpuinfo(policy, &p4clockmod_table[0]); -} - - -static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static unsigned int cpufreq_p4_get(unsigned int cpu) -{ - u32 l, h; - - rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); - - if (l & 0x10) { - l = l >> 1; - l &= 0x7; - } else - l = DC_DISABLE; - - if (l != DC_DISABLE) - return stock_freq * l / 8; - - return stock_freq; -} - -static struct freq_attr *p4clockmod_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver p4clockmod_driver = { - .verify = cpufreq_p4_verify, - .target = cpufreq_p4_target, - .init = cpufreq_p4_cpu_init, - .exit = cpufreq_p4_cpu_exit, - .get = cpufreq_p4_get, - .name = "p4-clockmod", - .owner = THIS_MODULE, - .attr = p4clockmod_attr, -}; - - -static int __init cpufreq_p4_init(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - int ret; - - /* - * THERM_CONTROL is architectural for IA32 now, so - * we can rely on the capability checks - */ - if (c->x86_vendor != X86_VENDOR_INTEL) - return -ENODEV; - - if (!test_cpu_cap(c, X86_FEATURE_ACPI) || - !test_cpu_cap(c, X86_FEATURE_ACC)) - return -ENODEV; - - ret = cpufreq_register_driver(&p4clockmod_driver); - if (!ret) - printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock " - "Modulation available\n"); - - return ret; -} - - -static void __exit cpufreq_p4_exit(void) -{ - cpufreq_unregister_driver(&p4clockmod_driver); -} - - -MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>"); -MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)"); -MODULE_LICENSE("GPL"); - -late_initcall(cpufreq_p4_init); -module_exit(cpufreq_p4_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c deleted file mode 100644 index 755a31e0f5b..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c +++ /dev/null @@ -1,624 +0,0 @@ -/* - * pcc-cpufreq.c - Processor Clocking Control firmware cpufreq interface - * - * Copyright (C) 2009 Red Hat, Matthew Garrett <mjg@redhat.com> - * Copyright (C) 2009 Hewlett-Packard Development Company, L.P. - * Nagananda Chumbalkar <nagananda.chumbalkar@hp.com> - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or NON - * INFRINGEMENT. See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/sched.h> -#include <linux/cpufreq.h> -#include <linux/compiler.h> -#include <linux/slab.h> - -#include <linux/acpi.h> -#include <linux/io.h> -#include <linux/spinlock.h> -#include <linux/uaccess.h> - -#include <acpi/processor.h> - -#define PCC_VERSION "1.00.00" -#define POLL_LOOPS 300 - -#define CMD_COMPLETE 0x1 -#define CMD_GET_FREQ 0x0 -#define CMD_SET_FREQ 0x1 - -#define BUF_SZ 4 - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "pcc-cpufreq", msg) - -struct pcc_register_resource { - u8 descriptor; - u16 length; - u8 space_id; - u8 bit_width; - u8 bit_offset; - u8 access_size; - u64 address; -} __attribute__ ((packed)); - -struct pcc_memory_resource { - u8 descriptor; - u16 length; - u8 space_id; - u8 resource_usage; - u8 type_specific; - u64 granularity; - u64 minimum; - u64 maximum; - u64 translation_offset; - u64 address_length; -} __attribute__ ((packed)); - -static struct cpufreq_driver pcc_cpufreq_driver; - -struct pcc_header { - u32 signature; - u16 length; - u8 major; - u8 minor; - u32 features; - u16 command; - u16 status; - u32 latency; - u32 minimum_time; - u32 maximum_time; - u32 nominal; - u32 throttled_frequency; - u32 minimum_frequency; -}; - -static void __iomem *pcch_virt_addr; -static struct pcc_header __iomem *pcch_hdr; - -static DEFINE_SPINLOCK(pcc_lock); - -static struct acpi_generic_address doorbell; - -static u64 doorbell_preserve; -static u64 doorbell_write; - -static u8 OSC_UUID[16] = {0x63, 0x9B, 0x2C, 0x9F, 0x70, 0x91, 0x49, 0x1f, - 0xBB, 0x4F, 0xA5, 0x98, 0x2F, 0xA1, 0xB5, 0x46}; - -struct pcc_cpu { - u32 input_offset; - u32 output_offset; -}; - -static struct pcc_cpu __percpu *pcc_cpu_info; - -static int pcc_cpufreq_verify(struct cpufreq_policy *policy) -{ - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - return 0; -} - -static inline void pcc_cmd(void) -{ - u64 doorbell_value; - int i; - - acpi_read(&doorbell_value, &doorbell); - acpi_write((doorbell_value & doorbell_preserve) | doorbell_write, - &doorbell); - - for (i = 0; i < POLL_LOOPS; i++) { - if (ioread16(&pcch_hdr->status) & CMD_COMPLETE) - break; - } -} - -static inline void pcc_clear_mapping(void) -{ - if (pcch_virt_addr) - iounmap(pcch_virt_addr); - pcch_virt_addr = NULL; -} - -static unsigned int pcc_get_freq(unsigned int cpu) -{ - struct pcc_cpu *pcc_cpu_data; - unsigned int curr_freq; - unsigned int freq_limit; - u16 status; - u32 input_buffer; - u32 output_buffer; - - spin_lock(&pcc_lock); - - dprintk("get: get_freq for CPU %d\n", cpu); - pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu); - - input_buffer = 0x1; - iowrite32(input_buffer, - (pcch_virt_addr + pcc_cpu_data->input_offset)); - iowrite16(CMD_GET_FREQ, &pcch_hdr->command); - - pcc_cmd(); - - output_buffer = - ioread32(pcch_virt_addr + pcc_cpu_data->output_offset); - - /* Clear the input buffer - we are done with the current command */ - memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ); - - status = ioread16(&pcch_hdr->status); - if (status != CMD_COMPLETE) { - dprintk("get: FAILED: for CPU %d, status is %d\n", - cpu, status); - goto cmd_incomplete; - } - iowrite16(0, &pcch_hdr->status); - curr_freq = (((ioread32(&pcch_hdr->nominal) * (output_buffer & 0xff)) - / 100) * 1000); - - dprintk("get: SUCCESS: (virtual) output_offset for cpu %d is " - "0x%x, contains a value of: 0x%x. Speed is: %d MHz\n", - cpu, (pcch_virt_addr + pcc_cpu_data->output_offset), - output_buffer, curr_freq); - - freq_limit = (output_buffer >> 8) & 0xff; - if (freq_limit != 0xff) { - dprintk("get: frequency for cpu %d is being temporarily" - " capped at %d\n", cpu, curr_freq); - } - - spin_unlock(&pcc_lock); - return curr_freq; - -cmd_incomplete: - iowrite16(0, &pcch_hdr->status); - spin_unlock(&pcc_lock); - return 0; -} - -static int pcc_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct pcc_cpu *pcc_cpu_data; - struct cpufreq_freqs freqs; - u16 status; - u32 input_buffer; - int cpu; - - spin_lock(&pcc_lock); - cpu = policy->cpu; - pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu); - - dprintk("target: CPU %d should go to target freq: %d " - "(virtual) input_offset is 0x%x\n", - cpu, target_freq, - (pcch_virt_addr + pcc_cpu_data->input_offset)); - - freqs.new = target_freq; - freqs.cpu = cpu; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - input_buffer = 0x1 | (((target_freq * 100) - / (ioread32(&pcch_hdr->nominal) * 1000)) << 8); - iowrite32(input_buffer, - (pcch_virt_addr + pcc_cpu_data->input_offset)); - iowrite16(CMD_SET_FREQ, &pcch_hdr->command); - - pcc_cmd(); - - /* Clear the input buffer - we are done with the current command */ - memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ); - - status = ioread16(&pcch_hdr->status); - if (status != CMD_COMPLETE) { - dprintk("target: FAILED for cpu %d, with status: 0x%x\n", - cpu, status); - goto cmd_incomplete; - } - iowrite16(0, &pcch_hdr->status); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - dprintk("target: was SUCCESSFUL for cpu %d\n", cpu); - spin_unlock(&pcc_lock); - - return 0; - -cmd_incomplete: - iowrite16(0, &pcch_hdr->status); - spin_unlock(&pcc_lock); - return -EINVAL; -} - -static int pcc_get_offset(int cpu) -{ - acpi_status status; - struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; - union acpi_object *pccp, *offset; - struct pcc_cpu *pcc_cpu_data; - struct acpi_processor *pr; - int ret = 0; - - pr = per_cpu(processors, cpu); - pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu); - - status = acpi_evaluate_object(pr->handle, "PCCP", NULL, &buffer); - if (ACPI_FAILURE(status)) - return -ENODEV; - - pccp = buffer.pointer; - if (!pccp || pccp->type != ACPI_TYPE_PACKAGE) { - ret = -ENODEV; - goto out_free; - }; - - offset = &(pccp->package.elements[0]); - if (!offset || offset->type != ACPI_TYPE_INTEGER) { - ret = -ENODEV; - goto out_free; - } - - pcc_cpu_data->input_offset = offset->integer.value; - - offset = &(pccp->package.elements[1]); - if (!offset || offset->type != ACPI_TYPE_INTEGER) { - ret = -ENODEV; - goto out_free; - } - - pcc_cpu_data->output_offset = offset->integer.value; - - memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ); - memset_io((pcch_virt_addr + pcc_cpu_data->output_offset), 0, BUF_SZ); - - dprintk("pcc_get_offset: for CPU %d: pcc_cpu_data " - "input_offset: 0x%x, pcc_cpu_data output_offset: 0x%x\n", - cpu, pcc_cpu_data->input_offset, pcc_cpu_data->output_offset); -out_free: - kfree(buffer.pointer); - return ret; -} - -static int __init pcc_cpufreq_do_osc(acpi_handle *handle) -{ - acpi_status status; - struct acpi_object_list input; - struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; - union acpi_object in_params[4]; - union acpi_object *out_obj; - u32 capabilities[2]; - u32 errors; - u32 supported; - int ret = 0; - - input.count = 4; - input.pointer = in_params; - in_params[0].type = ACPI_TYPE_BUFFER; - in_params[0].buffer.length = 16; - in_params[0].buffer.pointer = OSC_UUID; - in_params[1].type = ACPI_TYPE_INTEGER; - in_params[1].integer.value = 1; - in_params[2].type = ACPI_TYPE_INTEGER; - in_params[2].integer.value = 2; - in_params[3].type = ACPI_TYPE_BUFFER; - in_params[3].buffer.length = 8; - in_params[3].buffer.pointer = (u8 *)&capabilities; - - capabilities[0] = OSC_QUERY_ENABLE; - capabilities[1] = 0x1; - - status = acpi_evaluate_object(*handle, "_OSC", &input, &output); - if (ACPI_FAILURE(status)) - return -ENODEV; - - if (!output.length) - return -ENODEV; - - out_obj = output.pointer; - if (out_obj->type != ACPI_TYPE_BUFFER) { - ret = -ENODEV; - goto out_free; - } - - errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0); - if (errors) { - ret = -ENODEV; - goto out_free; - } - - supported = *((u32 *)(out_obj->buffer.pointer + 4)); - if (!(supported & 0x1)) { - ret = -ENODEV; - goto out_free; - } - - kfree(output.pointer); - capabilities[0] = 0x0; - capabilities[1] = 0x1; - - status = acpi_evaluate_object(*handle, "_OSC", &input, &output); - if (ACPI_FAILURE(status)) - return -ENODEV; - - if (!output.length) - return -ENODEV; - - out_obj = output.pointer; - if (out_obj->type != ACPI_TYPE_BUFFER) { - ret = -ENODEV; - goto out_free; - } - - errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0); - if (errors) { - ret = -ENODEV; - goto out_free; - } - - supported = *((u32 *)(out_obj->buffer.pointer + 4)); - if (!(supported & 0x1)) { - ret = -ENODEV; - goto out_free; - } - -out_free: - kfree(output.pointer); - return ret; -} - -static int __init pcc_cpufreq_probe(void) -{ - acpi_status status; - struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; - struct pcc_memory_resource *mem_resource; - struct pcc_register_resource *reg_resource; - union acpi_object *out_obj, *member; - acpi_handle handle, osc_handle, pcch_handle; - int ret = 0; - - status = acpi_get_handle(NULL, "\\_SB", &handle); - if (ACPI_FAILURE(status)) - return -ENODEV; - - status = acpi_get_handle(handle, "PCCH", &pcch_handle); - if (ACPI_FAILURE(status)) - return -ENODEV; - - status = acpi_get_handle(handle, "_OSC", &osc_handle); - if (ACPI_SUCCESS(status)) { - ret = pcc_cpufreq_do_osc(&osc_handle); - if (ret) - dprintk("probe: _OSC evaluation did not succeed\n"); - /* Firmware's use of _OSC is optional */ - ret = 0; - } - - status = acpi_evaluate_object(handle, "PCCH", NULL, &output); - if (ACPI_FAILURE(status)) - return -ENODEV; - - out_obj = output.pointer; - if (out_obj->type != ACPI_TYPE_PACKAGE) { - ret = -ENODEV; - goto out_free; - } - - member = &out_obj->package.elements[0]; - if (member->type != ACPI_TYPE_BUFFER) { - ret = -ENODEV; - goto out_free; - } - - mem_resource = (struct pcc_memory_resource *)member->buffer.pointer; - - dprintk("probe: mem_resource descriptor: 0x%x," - " length: %d, space_id: %d, resource_usage: %d," - " type_specific: %d, granularity: 0x%llx," - " minimum: 0x%llx, maximum: 0x%llx," - " translation_offset: 0x%llx, address_length: 0x%llx\n", - mem_resource->descriptor, mem_resource->length, - mem_resource->space_id, mem_resource->resource_usage, - mem_resource->type_specific, mem_resource->granularity, - mem_resource->minimum, mem_resource->maximum, - mem_resource->translation_offset, - mem_resource->address_length); - - if (mem_resource->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) { - ret = -ENODEV; - goto out_free; - } - - pcch_virt_addr = ioremap_nocache(mem_resource->minimum, - mem_resource->address_length); - if (pcch_virt_addr == NULL) { - dprintk("probe: could not map shared mem region\n"); - goto out_free; - } - pcch_hdr = pcch_virt_addr; - - dprintk("probe: PCCH header (virtual) addr: 0x%p\n", pcch_hdr); - dprintk("probe: PCCH header is at physical address: 0x%llx," - " signature: 0x%x, length: %d bytes, major: %d, minor: %d," - " supported features: 0x%x, command field: 0x%x," - " status field: 0x%x, nominal latency: %d us\n", - mem_resource->minimum, ioread32(&pcch_hdr->signature), - ioread16(&pcch_hdr->length), ioread8(&pcch_hdr->major), - ioread8(&pcch_hdr->minor), ioread32(&pcch_hdr->features), - ioread16(&pcch_hdr->command), ioread16(&pcch_hdr->status), - ioread32(&pcch_hdr->latency)); - - dprintk("probe: min time between commands: %d us," - " max time between commands: %d us," - " nominal CPU frequency: %d MHz," - " minimum CPU frequency: %d MHz," - " minimum CPU frequency without throttling: %d MHz\n", - ioread32(&pcch_hdr->minimum_time), - ioread32(&pcch_hdr->maximum_time), - ioread32(&pcch_hdr->nominal), - ioread32(&pcch_hdr->throttled_frequency), - ioread32(&pcch_hdr->minimum_frequency)); - - member = &out_obj->package.elements[1]; - if (member->type != ACPI_TYPE_BUFFER) { - ret = -ENODEV; - goto pcch_free; - } - - reg_resource = (struct pcc_register_resource *)member->buffer.pointer; - - doorbell.space_id = reg_resource->space_id; - doorbell.bit_width = reg_resource->bit_width; - doorbell.bit_offset = reg_resource->bit_offset; - doorbell.access_width = 64; - doorbell.address = reg_resource->address; - - dprintk("probe: doorbell: space_id is %d, bit_width is %d, " - "bit_offset is %d, access_width is %d, address is 0x%llx\n", - doorbell.space_id, doorbell.bit_width, doorbell.bit_offset, - doorbell.access_width, reg_resource->address); - - member = &out_obj->package.elements[2]; - if (member->type != ACPI_TYPE_INTEGER) { - ret = -ENODEV; - goto pcch_free; - } - - doorbell_preserve = member->integer.value; - - member = &out_obj->package.elements[3]; - if (member->type != ACPI_TYPE_INTEGER) { - ret = -ENODEV; - goto pcch_free; - } - - doorbell_write = member->integer.value; - - dprintk("probe: doorbell_preserve: 0x%llx," - " doorbell_write: 0x%llx\n", - doorbell_preserve, doorbell_write); - - pcc_cpu_info = alloc_percpu(struct pcc_cpu); - if (!pcc_cpu_info) { - ret = -ENOMEM; - goto pcch_free; - } - - printk(KERN_DEBUG "pcc-cpufreq: (v%s) driver loaded with frequency" - " limits: %d MHz, %d MHz\n", PCC_VERSION, - ioread32(&pcch_hdr->minimum_frequency), - ioread32(&pcch_hdr->nominal)); - kfree(output.pointer); - return ret; -pcch_free: - pcc_clear_mapping(); -out_free: - kfree(output.pointer); - return ret; -} - -static int pcc_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int cpu = policy->cpu; - unsigned int result = 0; - - if (!pcch_virt_addr) { - result = -1; - goto out; - } - - result = pcc_get_offset(cpu); - if (result) { - dprintk("init: PCCP evaluation failed\n"); - goto out; - } - - policy->max = policy->cpuinfo.max_freq = - ioread32(&pcch_hdr->nominal) * 1000; - policy->min = policy->cpuinfo.min_freq = - ioread32(&pcch_hdr->minimum_frequency) * 1000; - policy->cur = pcc_get_freq(cpu); - - if (!policy->cur) { - dprintk("init: Unable to get current CPU frequency\n"); - result = -EINVAL; - goto out; - } - - dprintk("init: policy->max is %d, policy->min is %d\n", - policy->max, policy->min); -out: - return result; -} - -static int pcc_cpufreq_cpu_exit(struct cpufreq_policy *policy) -{ - return 0; -} - -static struct cpufreq_driver pcc_cpufreq_driver = { - .flags = CPUFREQ_CONST_LOOPS, - .get = pcc_get_freq, - .verify = pcc_cpufreq_verify, - .target = pcc_cpufreq_target, - .init = pcc_cpufreq_cpu_init, - .exit = pcc_cpufreq_cpu_exit, - .name = "pcc-cpufreq", - .owner = THIS_MODULE, -}; - -static int __init pcc_cpufreq_init(void) -{ - int ret; - - if (acpi_disabled) - return 0; - - ret = pcc_cpufreq_probe(); - if (ret) { - dprintk("pcc_cpufreq_init: PCCH evaluation failed\n"); - return ret; - } - - ret = cpufreq_register_driver(&pcc_cpufreq_driver); - - return ret; -} - -static void __exit pcc_cpufreq_exit(void) -{ - cpufreq_unregister_driver(&pcc_cpufreq_driver); - - pcc_clear_mapping(); - - free_percpu(pcc_cpu_info); -} - -MODULE_AUTHOR("Matthew Garrett, Naga Chumbalkar"); -MODULE_VERSION(PCC_VERSION); -MODULE_DESCRIPTION("Processor Clocking Control interface driver"); -MODULE_LICENSE("GPL"); - -late_initcall(pcc_cpufreq_init); -module_exit(pcc_cpufreq_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c deleted file mode 100644 index b3379d6a5c5..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c +++ /dev/null @@ -1,261 +0,0 @@ -/* - * This file was based upon code in Powertweak Linux (http://powertweak.sf.net) - * (C) 2000-2003 Dave Jones, Arjan van de Ven, Janne Pänkälä, - * Dominik Brodowski. - * - * Licensed under the terms of the GNU GPL License version 2. - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/ioport.h> -#include <linux/timex.h> -#include <linux/io.h> - -#include <asm/msr.h> - -#define POWERNOW_IOPORT 0xfff0 /* it doesn't matter where, as long - as it is unused */ - -#define PFX "powernow-k6: " -static unsigned int busfreq; /* FSB, in 10 kHz */ -static unsigned int max_multiplier; - - -/* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */ -static struct cpufreq_frequency_table clock_ratio[] = { - {45, /* 000 -> 4.5x */ 0}, - {50, /* 001 -> 5.0x */ 0}, - {40, /* 010 -> 4.0x */ 0}, - {55, /* 011 -> 5.5x */ 0}, - {20, /* 100 -> 2.0x */ 0}, - {30, /* 101 -> 3.0x */ 0}, - {60, /* 110 -> 6.0x */ 0}, - {35, /* 111 -> 3.5x */ 0}, - {0, CPUFREQ_TABLE_END} -}; - - -/** - * powernow_k6_get_cpu_multiplier - returns the current FSB multiplier - * - * Returns the current setting of the frequency multiplier. Core clock - * speed is frequency of the Front-Side Bus multiplied with this value. - */ -static int powernow_k6_get_cpu_multiplier(void) -{ - u64 invalue = 0; - u32 msrval; - - msrval = POWERNOW_IOPORT + 0x1; - wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ - invalue = inl(POWERNOW_IOPORT + 0x8); - msrval = POWERNOW_IOPORT + 0x0; - wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ - - return clock_ratio[(invalue >> 5)&7].index; -} - - -/** - * powernow_k6_set_state - set the PowerNow! multiplier - * @best_i: clock_ratio[best_i] is the target multiplier - * - * Tries to change the PowerNow! multiplier - */ -static void powernow_k6_set_state(unsigned int best_i) -{ - unsigned long outvalue = 0, invalue = 0; - unsigned long msrval; - struct cpufreq_freqs freqs; - - if (clock_ratio[best_i].index > max_multiplier) { - printk(KERN_ERR PFX "invalid target frequency\n"); - return; - } - - freqs.old = busfreq * powernow_k6_get_cpu_multiplier(); - freqs.new = busfreq * clock_ratio[best_i].index; - freqs.cpu = 0; /* powernow-k6.c is UP only driver */ - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* we now need to transform best_i to the BVC format, see AMD#23446 */ - - outvalue = (1<<12) | (1<<10) | (1<<9) | (best_i<<5); - - msrval = POWERNOW_IOPORT + 0x1; - wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ - invalue = inl(POWERNOW_IOPORT + 0x8); - invalue = invalue & 0xf; - outvalue = outvalue | invalue; - outl(outvalue , (POWERNOW_IOPORT + 0x8)); - msrval = POWERNOW_IOPORT + 0x0; - wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return; -} - - -/** - * powernow_k6_verify - verifies a new CPUfreq policy - * @policy: new policy - * - * Policy must be within lowest and highest possible CPU Frequency, - * and at least one possible state must be within min and max. - */ -static int powernow_k6_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &clock_ratio[0]); -} - - -/** - * powernow_k6_setpolicy - sets a new CPUFreq policy - * @policy: new policy - * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency - * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) - * - * sets a new CPUFreq policy - */ -static int powernow_k6_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target(policy, &clock_ratio[0], - target_freq, relation, &newstate)) - return -EINVAL; - - powernow_k6_set_state(newstate); - - return 0; -} - - -static int powernow_k6_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int i, f; - int result; - - if (policy->cpu != 0) - return -ENODEV; - - /* get frequencies */ - max_multiplier = powernow_k6_get_cpu_multiplier(); - busfreq = cpu_khz / max_multiplier; - - /* table init */ - for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { - f = clock_ratio[i].index; - if (f > max_multiplier) - clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID; - else - clock_ratio[i].frequency = busfreq * f; - } - - /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = 200000; - policy->cur = busfreq * max_multiplier; - - result = cpufreq_frequency_table_cpuinfo(policy, clock_ratio); - if (result) - return result; - - cpufreq_frequency_table_get_attr(clock_ratio, policy->cpu); - - return 0; -} - - -static int powernow_k6_cpu_exit(struct cpufreq_policy *policy) -{ - unsigned int i; - for (i = 0; i < 8; i++) { - if (i == max_multiplier) - powernow_k6_set_state(i); - } - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static unsigned int powernow_k6_get(unsigned int cpu) -{ - unsigned int ret; - ret = (busfreq * powernow_k6_get_cpu_multiplier()); - return ret; -} - -static struct freq_attr *powernow_k6_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver powernow_k6_driver = { - .verify = powernow_k6_verify, - .target = powernow_k6_target, - .init = powernow_k6_cpu_init, - .exit = powernow_k6_cpu_exit, - .get = powernow_k6_get, - .name = "powernow-k6", - .owner = THIS_MODULE, - .attr = powernow_k6_attr, -}; - - -/** - * powernow_k6_init - initializes the k6 PowerNow! CPUFreq driver - * - * Initializes the K6 PowerNow! support. Returns -ENODEV on unsupported - * devices, -EINVAL or -ENOMEM on problems during initiatization, and zero - * on success. - */ -static int __init powernow_k6_init(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - - if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 5) || - ((c->x86_model != 12) && (c->x86_model != 13))) - return -ENODEV; - - if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) { - printk(KERN_INFO PFX "PowerNow IOPORT region already used.\n"); - return -EIO; - } - - if (cpufreq_register_driver(&powernow_k6_driver)) { - release_region(POWERNOW_IOPORT, 16); - return -EINVAL; - } - - return 0; -} - - -/** - * powernow_k6_exit - unregisters AMD K6-2+/3+ PowerNow! support - * - * Unregisters AMD K6-2+ / K6-3+ PowerNow! support. - */ -static void __exit powernow_k6_exit(void) -{ - cpufreq_unregister_driver(&powernow_k6_driver); - release_region(POWERNOW_IOPORT, 16); -} - - -MODULE_AUTHOR("Arjan van de Ven, Dave Jones <davej@redhat.com>, " - "Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION("PowerNow! driver for AMD K6-2+ / K6-3+ processors."); -MODULE_LICENSE("GPL"); - -module_init(powernow_k6_init); -module_exit(powernow_k6_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c deleted file mode 100644 index 4a45fd6e41b..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c +++ /dev/null @@ -1,752 +0,0 @@ -/* - * AMD K7 Powernow driver. - * (C) 2003 Dave Jones on behalf of SuSE Labs. - * (C) 2003-2004 Dave Jones <davej@redhat.com> - * - * Licensed under the terms of the GNU GPL License version 2. - * Based upon datasheets & sample CPUs kindly provided by AMD. - * - * Errata 5: - * CPU may fail to execute a FID/VID change in presence of interrupt. - * - We cli/sti on stepping A0 CPUs around the FID/VID transition. - * Errata 15: - * CPU with half frequency multipliers may hang upon wakeup from disconnect. - * - We disable half multipliers if ACPI is used on A0 stepping CPUs. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/dmi.h> -#include <linux/timex.h> -#include <linux/io.h> - -#include <asm/timer.h> /* Needed for recalibrate_cpu_khz() */ -#include <asm/msr.h> -#include <asm/system.h> - -#ifdef CONFIG_X86_POWERNOW_K7_ACPI -#include <linux/acpi.h> -#include <acpi/processor.h> -#endif - -#include "powernow-k7.h" - -#define PFX "powernow: " - - -struct psb_s { - u8 signature[10]; - u8 tableversion; - u8 flags; - u16 settlingtime; - u8 reserved1; - u8 numpst; -}; - -struct pst_s { - u32 cpuid; - u8 fsbspeed; - u8 maxfid; - u8 startvid; - u8 numpstates; -}; - -#ifdef CONFIG_X86_POWERNOW_K7_ACPI -union powernow_acpi_control_t { - struct { - unsigned long fid:5, - vid:5, - sgtc:20, - res1:2; - } bits; - unsigned long val; -}; -#endif - -#ifdef CONFIG_CPU_FREQ_DEBUG -/* divide by 1000 to get VCore voltage in V. */ -static const int mobile_vid_table[32] = { - 2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650, - 1600, 1550, 1500, 1450, 1400, 1350, 1300, 0, - 1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100, - 1075, 1050, 1025, 1000, 975, 950, 925, 0, -}; -#endif - -/* divide by 10 to get FID. */ -static const int fid_codes[32] = { - 110, 115, 120, 125, 50, 55, 60, 65, - 70, 75, 80, 85, 90, 95, 100, 105, - 30, 190, 40, 200, 130, 135, 140, 210, - 150, 225, 160, 165, 170, 180, -1, -1, -}; - -/* This parameter is used in order to force ACPI instead of legacy method for - * configuration purpose. - */ - -static int acpi_force; - -static struct cpufreq_frequency_table *powernow_table; - -static unsigned int can_scale_bus; -static unsigned int can_scale_vid; -static unsigned int minimum_speed = -1; -static unsigned int maximum_speed; -static unsigned int number_scales; -static unsigned int fsb; -static unsigned int latency; -static char have_a0; - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "powernow-k7", msg) - -static int check_fsb(unsigned int fsbspeed) -{ - int delta; - unsigned int f = fsb / 1000; - - delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed; - return delta < 5; -} - -static int check_powernow(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - unsigned int maxei, eax, ebx, ecx, edx; - - if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 6)) { -#ifdef MODULE - printk(KERN_INFO PFX "This module only works with " - "AMD K7 CPUs\n"); -#endif - return 0; - } - - /* Get maximum capabilities */ - maxei = cpuid_eax(0x80000000); - if (maxei < 0x80000007) { /* Any powernow info ? */ -#ifdef MODULE - printk(KERN_INFO PFX "No powernow capabilities detected\n"); -#endif - return 0; - } - - if ((c->x86_model == 6) && (c->x86_mask == 0)) { - printk(KERN_INFO PFX "K7 660[A0] core detected, " - "enabling errata workarounds\n"); - have_a0 = 1; - } - - cpuid(0x80000007, &eax, &ebx, &ecx, &edx); - - /* Check we can actually do something before we say anything.*/ - if (!(edx & (1 << 1 | 1 << 2))) - return 0; - - printk(KERN_INFO PFX "PowerNOW! Technology present. Can scale: "); - - if (edx & 1 << 1) { - printk("frequency"); - can_scale_bus = 1; - } - - if ((edx & (1 << 1 | 1 << 2)) == 0x6) - printk(" and "); - - if (edx & 1 << 2) { - printk("voltage"); - can_scale_vid = 1; - } - - printk(".\n"); - return 1; -} - -#ifdef CONFIG_X86_POWERNOW_K7_ACPI -static void invalidate_entry(unsigned int entry) -{ - powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID; -} -#endif - -static int get_ranges(unsigned char *pst) -{ - unsigned int j; - unsigned int speed; - u8 fid, vid; - - powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * - (number_scales + 1)), GFP_KERNEL); - if (!powernow_table) - return -ENOMEM; - - for (j = 0 ; j < number_scales; j++) { - fid = *pst++; - - powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10; - powernow_table[j].index = fid; /* lower 8 bits */ - - speed = powernow_table[j].frequency; - - if ((fid_codes[fid] % 10) == 5) { -#ifdef CONFIG_X86_POWERNOW_K7_ACPI - if (have_a0 == 1) - invalidate_entry(j); -#endif - } - - if (speed < minimum_speed) - minimum_speed = speed; - if (speed > maximum_speed) - maximum_speed = speed; - - vid = *pst++; - powernow_table[j].index |= (vid << 8); /* upper 8 bits */ - - dprintk(" FID: 0x%x (%d.%dx [%dMHz]) " - "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, - fid_codes[fid] % 10, speed/1000, vid, - mobile_vid_table[vid]/1000, - mobile_vid_table[vid]%1000); - } - powernow_table[number_scales].frequency = CPUFREQ_TABLE_END; - powernow_table[number_scales].index = 0; - - return 0; -} - - -static void change_FID(int fid) -{ - union msr_fidvidctl fidvidctl; - - rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); - if (fidvidctl.bits.FID != fid) { - fidvidctl.bits.SGTC = latency; - fidvidctl.bits.FID = fid; - fidvidctl.bits.VIDC = 0; - fidvidctl.bits.FIDC = 1; - wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); - } -} - - -static void change_VID(int vid) -{ - union msr_fidvidctl fidvidctl; - - rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); - if (fidvidctl.bits.VID != vid) { - fidvidctl.bits.SGTC = latency; - fidvidctl.bits.VID = vid; - fidvidctl.bits.FIDC = 0; - fidvidctl.bits.VIDC = 1; - wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); - } -} - - -static void change_speed(unsigned int index) -{ - u8 fid, vid; - struct cpufreq_freqs freqs; - union msr_fidvidstatus fidvidstatus; - int cfid; - - /* fid are the lower 8 bits of the index we stored into - * the cpufreq frequency table in powernow_decode_bios, - * vid are the upper 8 bits. - */ - - fid = powernow_table[index].index & 0xFF; - vid = (powernow_table[index].index & 0xFF00) >> 8; - - freqs.cpu = 0; - - rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); - cfid = fidvidstatus.bits.CFID; - freqs.old = fsb * fid_codes[cfid] / 10; - - freqs.new = powernow_table[index].frequency; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* Now do the magic poking into the MSRs. */ - - if (have_a0 == 1) /* A0 errata 5 */ - local_irq_disable(); - - if (freqs.old > freqs.new) { - /* Going down, so change FID first */ - change_FID(fid); - change_VID(vid); - } else { - /* Going up, so change VID first */ - change_VID(vid); - change_FID(fid); - } - - - if (have_a0 == 1) - local_irq_enable(); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); -} - - -#ifdef CONFIG_X86_POWERNOW_K7_ACPI - -static struct acpi_processor_performance *acpi_processor_perf; - -static int powernow_acpi_init(void) -{ - int i; - int retval = 0; - union powernow_acpi_control_t pc; - - if (acpi_processor_perf != NULL && powernow_table != NULL) { - retval = -EINVAL; - goto err0; - } - - acpi_processor_perf = kzalloc(sizeof(struct acpi_processor_performance), - GFP_KERNEL); - if (!acpi_processor_perf) { - retval = -ENOMEM; - goto err0; - } - - if (!zalloc_cpumask_var(&acpi_processor_perf->shared_cpu_map, - GFP_KERNEL)) { - retval = -ENOMEM; - goto err05; - } - - if (acpi_processor_register_performance(acpi_processor_perf, 0)) { - retval = -EIO; - goto err1; - } - - if (acpi_processor_perf->control_register.space_id != - ACPI_ADR_SPACE_FIXED_HARDWARE) { - retval = -ENODEV; - goto err2; - } - - if (acpi_processor_perf->status_register.space_id != - ACPI_ADR_SPACE_FIXED_HARDWARE) { - retval = -ENODEV; - goto err2; - } - - number_scales = acpi_processor_perf->state_count; - - if (number_scales < 2) { - retval = -ENODEV; - goto err2; - } - - powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * - (number_scales + 1)), GFP_KERNEL); - if (!powernow_table) { - retval = -ENOMEM; - goto err2; - } - - pc.val = (unsigned long) acpi_processor_perf->states[0].control; - for (i = 0; i < number_scales; i++) { - u8 fid, vid; - struct acpi_processor_px *state = - &acpi_processor_perf->states[i]; - unsigned int speed, speed_mhz; - - pc.val = (unsigned long) state->control; - dprintk("acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n", - i, - (u32) state->core_frequency, - (u32) state->power, - (u32) state->transition_latency, - (u32) state->control, - pc.bits.sgtc); - - vid = pc.bits.vid; - fid = pc.bits.fid; - - powernow_table[i].frequency = fsb * fid_codes[fid] / 10; - powernow_table[i].index = fid; /* lower 8 bits */ - powernow_table[i].index |= (vid << 8); /* upper 8 bits */ - - speed = powernow_table[i].frequency; - speed_mhz = speed / 1000; - - /* processor_perflib will multiply the MHz value by 1000 to - * get a KHz value (e.g. 1266000). However, powernow-k7 works - * with true KHz values (e.g. 1266768). To ensure that all - * powernow frequencies are available, we must ensure that - * ACPI doesn't restrict them, so we round up the MHz value - * to ensure that perflib's computed KHz value is greater than - * or equal to powernow's KHz value. - */ - if (speed % 1000 > 0) - speed_mhz++; - - if ((fid_codes[fid] % 10) == 5) { - if (have_a0 == 1) - invalidate_entry(i); - } - - dprintk(" FID: 0x%x (%d.%dx [%dMHz]) " - "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, - fid_codes[fid] % 10, speed_mhz, vid, - mobile_vid_table[vid]/1000, - mobile_vid_table[vid]%1000); - - if (state->core_frequency != speed_mhz) { - state->core_frequency = speed_mhz; - dprintk(" Corrected ACPI frequency to %d\n", - speed_mhz); - } - - if (latency < pc.bits.sgtc) - latency = pc.bits.sgtc; - - if (speed < minimum_speed) - minimum_speed = speed; - if (speed > maximum_speed) - maximum_speed = speed; - } - - powernow_table[i].frequency = CPUFREQ_TABLE_END; - powernow_table[i].index = 0; - - /* notify BIOS that we exist */ - acpi_processor_notify_smm(THIS_MODULE); - - return 0; - -err2: - acpi_processor_unregister_performance(acpi_processor_perf, 0); -err1: - free_cpumask_var(acpi_processor_perf->shared_cpu_map); -err05: - kfree(acpi_processor_perf); -err0: - printk(KERN_WARNING PFX "ACPI perflib can not be used on " - "this platform\n"); - acpi_processor_perf = NULL; - return retval; -} -#else -static int powernow_acpi_init(void) -{ - printk(KERN_INFO PFX "no support for ACPI processor found." - " Please recompile your kernel with ACPI processor\n"); - return -EINVAL; -} -#endif - -static void print_pst_entry(struct pst_s *pst, unsigned int j) -{ - dprintk("PST:%d (@%p)\n", j, pst); - dprintk(" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n", - pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid); -} - -static int powernow_decode_bios(int maxfid, int startvid) -{ - struct psb_s *psb; - struct pst_s *pst; - unsigned int i, j; - unsigned char *p; - unsigned int etuple; - unsigned int ret; - - etuple = cpuid_eax(0x80000001); - - for (i = 0xC0000; i < 0xffff0 ; i += 16) { - - p = phys_to_virt(i); - - if (memcmp(p, "AMDK7PNOW!", 10) == 0) { - dprintk("Found PSB header at %p\n", p); - psb = (struct psb_s *) p; - dprintk("Table version: 0x%x\n", psb->tableversion); - if (psb->tableversion != 0x12) { - printk(KERN_INFO PFX "Sorry, only v1.2 tables" - " supported right now\n"); - return -ENODEV; - } - - dprintk("Flags: 0x%x\n", psb->flags); - if ((psb->flags & 1) == 0) - dprintk("Mobile voltage regulator\n"); - else - dprintk("Desktop voltage regulator\n"); - - latency = psb->settlingtime; - if (latency < 100) { - printk(KERN_INFO PFX "BIOS set settling time " - "to %d microseconds. " - "Should be at least 100. " - "Correcting.\n", latency); - latency = 100; - } - dprintk("Settling Time: %d microseconds.\n", - psb->settlingtime); - dprintk("Has %d PST tables. (Only dumping ones " - "relevant to this CPU).\n", - psb->numpst); - - p += sizeof(struct psb_s); - - pst = (struct pst_s *) p; - - for (j = 0; j < psb->numpst; j++) { - pst = (struct pst_s *) p; - number_scales = pst->numpstates; - - if ((etuple == pst->cpuid) && - check_fsb(pst->fsbspeed) && - (maxfid == pst->maxfid) && - (startvid == pst->startvid)) { - print_pst_entry(pst, j); - p = (char *)pst + sizeof(struct pst_s); - ret = get_ranges(p); - return ret; - } else { - unsigned int k; - p = (char *)pst + sizeof(struct pst_s); - for (k = 0; k < number_scales; k++) - p += 2; - } - } - printk(KERN_INFO PFX "No PST tables match this cpuid " - "(0x%x)\n", etuple); - printk(KERN_INFO PFX "This is indicative of a broken " - "BIOS.\n"); - - return -EINVAL; - } - p++; - } - - return -ENODEV; -} - - -static int powernow_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate; - - if (cpufreq_frequency_table_target(policy, powernow_table, target_freq, - relation, &newstate)) - return -EINVAL; - - change_speed(newstate); - - return 0; -} - - -static int powernow_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, powernow_table); -} - -/* - * We use the fact that the bus frequency is somehow - * a multiple of 100000/3 khz, then we compute sgtc according - * to this multiple. - * That way, we match more how AMD thinks all of that work. - * We will then get the same kind of behaviour already tested under - * the "well-known" other OS. - */ -static int __cpuinit fixup_sgtc(void) -{ - unsigned int sgtc; - unsigned int m; - - m = fsb / 3333; - if ((m % 10) >= 5) - m += 5; - - m /= 10; - - sgtc = 100 * m * latency; - sgtc = sgtc / 3; - if (sgtc > 0xfffff) { - printk(KERN_WARNING PFX "SGTC too large %d\n", sgtc); - sgtc = 0xfffff; - } - return sgtc; -} - -static unsigned int powernow_get(unsigned int cpu) -{ - union msr_fidvidstatus fidvidstatus; - unsigned int cfid; - - if (cpu) - return 0; - rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); - cfid = fidvidstatus.bits.CFID; - - return fsb * fid_codes[cfid] / 10; -} - - -static int __cpuinit acer_cpufreq_pst(const struct dmi_system_id *d) -{ - printk(KERN_WARNING PFX - "%s laptop with broken PST tables in BIOS detected.\n", - d->ident); - printk(KERN_WARNING PFX - "You need to downgrade to 3A21 (09/09/2002), or try a newer " - "BIOS than 3A71 (01/20/2003)\n"); - printk(KERN_WARNING PFX - "cpufreq scaling has been disabled as a result of this.\n"); - return 0; -} - -/* - * Some Athlon laptops have really fucked PST tables. - * A BIOS update is all that can save them. - * Mention this, and disable cpufreq. - */ -static struct dmi_system_id __cpuinitdata powernow_dmi_table[] = { - { - .callback = acer_cpufreq_pst, - .ident = "Acer Aspire", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Insyde Software"), - DMI_MATCH(DMI_BIOS_VERSION, "3A71"), - }, - }, - { } -}; - -static int __cpuinit powernow_cpu_init(struct cpufreq_policy *policy) -{ - union msr_fidvidstatus fidvidstatus; - int result; - - if (policy->cpu != 0) - return -ENODEV; - - rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); - - recalibrate_cpu_khz(); - - fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID]; - if (!fsb) { - printk(KERN_WARNING PFX "can not determine bus frequency\n"); - return -EINVAL; - } - dprintk("FSB: %3dMHz\n", fsb/1000); - - if (dmi_check_system(powernow_dmi_table) || acpi_force) { - printk(KERN_INFO PFX "PSB/PST known to be broken. " - "Trying ACPI instead\n"); - result = powernow_acpi_init(); - } else { - result = powernow_decode_bios(fidvidstatus.bits.MFID, - fidvidstatus.bits.SVID); - if (result) { - printk(KERN_INFO PFX "Trying ACPI perflib\n"); - maximum_speed = 0; - minimum_speed = -1; - latency = 0; - result = powernow_acpi_init(); - if (result) { - printk(KERN_INFO PFX - "ACPI and legacy methods failed\n"); - } - } else { - /* SGTC use the bus clock as timer */ - latency = fixup_sgtc(); - printk(KERN_INFO PFX "SGTC: %d\n", latency); - } - } - - if (result) - return result; - - printk(KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n", - minimum_speed/1000, maximum_speed/1000); - - policy->cpuinfo.transition_latency = - cpufreq_scale(2000000UL, fsb, latency); - - policy->cur = powernow_get(0); - - cpufreq_frequency_table_get_attr(powernow_table, policy->cpu); - - return cpufreq_frequency_table_cpuinfo(policy, powernow_table); -} - -static int powernow_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - -#ifdef CONFIG_X86_POWERNOW_K7_ACPI - if (acpi_processor_perf) { - acpi_processor_unregister_performance(acpi_processor_perf, 0); - free_cpumask_var(acpi_processor_perf->shared_cpu_map); - kfree(acpi_processor_perf); - } -#endif - - kfree(powernow_table); - return 0; -} - -static struct freq_attr *powernow_table_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver powernow_driver = { - .verify = powernow_verify, - .target = powernow_target, - .get = powernow_get, -#ifdef CONFIG_X86_POWERNOW_K7_ACPI - .bios_limit = acpi_processor_get_bios_limit, -#endif - .init = powernow_cpu_init, - .exit = powernow_cpu_exit, - .name = "powernow-k7", - .owner = THIS_MODULE, - .attr = powernow_table_attr, -}; - -static int __init powernow_init(void) -{ - if (check_powernow() == 0) - return -ENODEV; - return cpufreq_register_driver(&powernow_driver); -} - - -static void __exit powernow_exit(void) -{ - cpufreq_unregister_driver(&powernow_driver); -} - -module_param(acpi_force, int, 0444); -MODULE_PARM_DESC(acpi_force, "Force ACPI to be used."); - -MODULE_AUTHOR("Dave Jones <davej@redhat.com>"); -MODULE_DESCRIPTION("Powernow driver for AMD K7 processors."); -MODULE_LICENSE("GPL"); - -late_initcall(powernow_init); -module_exit(powernow_exit); - diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.h b/arch/x86/kernel/cpu/cpufreq/powernow-k7.h deleted file mode 100644 index 35fb4eaf6e1..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * (C) 2003 Dave Jones. - * - * Licensed under the terms of the GNU GPL License version 2. - * - * AMD-specific information - * - */ - -union msr_fidvidctl { - struct { - unsigned FID:5, // 4:0 - reserved1:3, // 7:5 - VID:5, // 12:8 - reserved2:3, // 15:13 - FIDC:1, // 16 - VIDC:1, // 17 - reserved3:2, // 19:18 - FIDCHGRATIO:1, // 20 - reserved4:11, // 31-21 - SGTC:20, // 32:51 - reserved5:12; // 63:52 - } bits; - unsigned long long val; -}; - -union msr_fidvidstatus { - struct { - unsigned CFID:5, // 4:0 - reserved1:3, // 7:5 - SFID:5, // 12:8 - reserved2:3, // 15:13 - MFID:5, // 20:16 - reserved3:11, // 31:21 - CVID:5, // 36:32 - reserved4:3, // 39:37 - SVID:5, // 44:40 - reserved5:3, // 47:45 - MVID:5, // 52:48 - reserved6:11; // 63:53 - } bits; - unsigned long long val; -}; diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c deleted file mode 100644 index 2368e38327b..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ /dev/null @@ -1,1607 +0,0 @@ -/* - * (c) 2003-2010 Advanced Micro Devices, Inc. - * Your use of this code is subject to the terms and conditions of the - * GNU general public license version 2. See "COPYING" or - * http://www.gnu.org/licenses/gpl.html - * - * Support : mark.langsdorf@amd.com - * - * Based on the powernow-k7.c module written by Dave Jones. - * (C) 2003 Dave Jones on behalf of SuSE Labs - * (C) 2004 Dominik Brodowski <linux@brodo.de> - * (C) 2004 Pavel Machek <pavel@ucw.cz> - * Licensed under the terms of the GNU GPL License version 2. - * Based upon datasheets & sample CPUs kindly provided by AMD. - * - * Valuable input gratefully received from Dave Jones, Pavel Machek, - * Dominik Brodowski, Jacob Shin, and others. - * Originally developed by Paul Devriendt. - * Processor information obtained from Chapter 9 (Power and Thermal Management) - * of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD - * Opteron Processors" available for download from www.amd.com - * - * Tables for specific CPUs can be inferred from - * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf - */ - -#include <linux/kernel.h> -#include <linux/smp.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/cpumask.h> -#include <linux/sched.h> /* for current / set_cpus_allowed() */ -#include <linux/io.h> -#include <linux/delay.h> - -#include <asm/msr.h> - -#include <linux/acpi.h> -#include <linux/mutex.h> -#include <acpi/processor.h> - -#define PFX "powernow-k8: " -#define VERSION "version 2.20.00" -#include "powernow-k8.h" -#include "mperf.h" - -/* serialize freq changes */ -static DEFINE_MUTEX(fidvid_mutex); - -static DEFINE_PER_CPU(struct powernow_k8_data *, powernow_data); - -static int cpu_family = CPU_OPTERON; - -/* core performance boost */ -static bool cpb_capable, cpb_enabled; -static struct msr __percpu *msrs; - -static struct cpufreq_driver cpufreq_amd64_driver; - -#ifndef CONFIG_SMP -static inline const struct cpumask *cpu_core_mask(int cpu) -{ - return cpumask_of(0); -} -#endif - -/* Return a frequency in MHz, given an input fid */ -static u32 find_freq_from_fid(u32 fid) -{ - return 800 + (fid * 100); -} - -/* Return a frequency in KHz, given an input fid */ -static u32 find_khz_freq_from_fid(u32 fid) -{ - return 1000 * find_freq_from_fid(fid); -} - -static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, - u32 pstate) -{ - return data[pstate].frequency; -} - -/* Return the vco fid for an input fid - * - * Each "low" fid has corresponding "high" fid, and you can get to "low" fids - * only from corresponding high fids. This returns "high" fid corresponding to - * "low" one. - */ -static u32 convert_fid_to_vco_fid(u32 fid) -{ - if (fid < HI_FID_TABLE_BOTTOM) - return 8 + (2 * fid); - else - return fid; -} - -/* - * Return 1 if the pending bit is set. Unless we just instructed the processor - * to transition to a new state, seeing this bit set is really bad news. - */ -static int pending_bit_stuck(void) -{ - u32 lo, hi; - - if (cpu_family == CPU_HW_PSTATE) - return 0; - - rdmsr(MSR_FIDVID_STATUS, lo, hi); - return lo & MSR_S_LO_CHANGE_PENDING ? 1 : 0; -} - -/* - * Update the global current fid / vid values from the status msr. - * Returns 1 on error. - */ -static int query_current_values_with_pending_wait(struct powernow_k8_data *data) -{ - u32 lo, hi; - u32 i = 0; - - if (cpu_family == CPU_HW_PSTATE) { - rdmsr(MSR_PSTATE_STATUS, lo, hi); - i = lo & HW_PSTATE_MASK; - data->currpstate = i; - - /* - * a workaround for family 11h erratum 311 might cause - * an "out-of-range Pstate if the core is in Pstate-0 - */ - if ((boot_cpu_data.x86 == 0x11) && (i >= data->numps)) - data->currpstate = HW_PSTATE_0; - - return 0; - } - do { - if (i++ > 10000) { - dprintk("detected change pending stuck\n"); - return 1; - } - rdmsr(MSR_FIDVID_STATUS, lo, hi); - } while (lo & MSR_S_LO_CHANGE_PENDING); - - data->currvid = hi & MSR_S_HI_CURRENT_VID; - data->currfid = lo & MSR_S_LO_CURRENT_FID; - - return 0; -} - -/* the isochronous relief time */ -static void count_off_irt(struct powernow_k8_data *data) -{ - udelay((1 << data->irt) * 10); - return; -} - -/* the voltage stabilization time */ -static void count_off_vst(struct powernow_k8_data *data) -{ - udelay(data->vstable * VST_UNITS_20US); - return; -} - -/* need to init the control msr to a safe value (for each cpu) */ -static void fidvid_msr_init(void) -{ - u32 lo, hi; - u8 fid, vid; - - rdmsr(MSR_FIDVID_STATUS, lo, hi); - vid = hi & MSR_S_HI_CURRENT_VID; - fid = lo & MSR_S_LO_CURRENT_FID; - lo = fid | (vid << MSR_C_LO_VID_SHIFT); - hi = MSR_C_HI_STP_GNT_BENIGN; - dprintk("cpu%d, init lo 0x%x, hi 0x%x\n", smp_processor_id(), lo, hi); - wrmsr(MSR_FIDVID_CTL, lo, hi); -} - -/* write the new fid value along with the other control fields to the msr */ -static int write_new_fid(struct powernow_k8_data *data, u32 fid) -{ - u32 lo; - u32 savevid = data->currvid; - u32 i = 0; - - if ((fid & INVALID_FID_MASK) || (data->currvid & INVALID_VID_MASK)) { - printk(KERN_ERR PFX "internal error - overflow on fid write\n"); - return 1; - } - - lo = fid; - lo |= (data->currvid << MSR_C_LO_VID_SHIFT); - lo |= MSR_C_LO_INIT_FID_VID; - - dprintk("writing fid 0x%x, lo 0x%x, hi 0x%x\n", - fid, lo, data->plllock * PLL_LOCK_CONVERSION); - - do { - wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION); - if (i++ > 100) { - printk(KERN_ERR PFX - "Hardware error - pending bit very stuck - " - "no further pstate changes possible\n"); - return 1; - } - } while (query_current_values_with_pending_wait(data)); - - count_off_irt(data); - - if (savevid != data->currvid) { - printk(KERN_ERR PFX - "vid change on fid trans, old 0x%x, new 0x%x\n", - savevid, data->currvid); - return 1; - } - - if (fid != data->currfid) { - printk(KERN_ERR PFX - "fid trans failed, fid 0x%x, curr 0x%x\n", fid, - data->currfid); - return 1; - } - - return 0; -} - -/* Write a new vid to the hardware */ -static int write_new_vid(struct powernow_k8_data *data, u32 vid) -{ - u32 lo; - u32 savefid = data->currfid; - int i = 0; - - if ((data->currfid & INVALID_FID_MASK) || (vid & INVALID_VID_MASK)) { - printk(KERN_ERR PFX "internal error - overflow on vid write\n"); - return 1; - } - - lo = data->currfid; - lo |= (vid << MSR_C_LO_VID_SHIFT); - lo |= MSR_C_LO_INIT_FID_VID; - - dprintk("writing vid 0x%x, lo 0x%x, hi 0x%x\n", - vid, lo, STOP_GRANT_5NS); - - do { - wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS); - if (i++ > 100) { - printk(KERN_ERR PFX "internal error - pending bit " - "very stuck - no further pstate " - "changes possible\n"); - return 1; - } - } while (query_current_values_with_pending_wait(data)); - - if (savefid != data->currfid) { - printk(KERN_ERR PFX "fid changed on vid trans, old " - "0x%x new 0x%x\n", - savefid, data->currfid); - return 1; - } - - if (vid != data->currvid) { - printk(KERN_ERR PFX "vid trans failed, vid 0x%x, " - "curr 0x%x\n", - vid, data->currvid); - return 1; - } - - return 0; -} - -/* - * Reduce the vid by the max of step or reqvid. - * Decreasing vid codes represent increasing voltages: - * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off. - */ -static int decrease_vid_code_by_step(struct powernow_k8_data *data, - u32 reqvid, u32 step) -{ - if ((data->currvid - reqvid) > step) - reqvid = data->currvid - step; - - if (write_new_vid(data, reqvid)) - return 1; - - count_off_vst(data); - - return 0; -} - -/* Change hardware pstate by single MSR write */ -static int transition_pstate(struct powernow_k8_data *data, u32 pstate) -{ - wrmsr(MSR_PSTATE_CTRL, pstate, 0); - data->currpstate = pstate; - return 0; -} - -/* Change Opteron/Athlon64 fid and vid, by the 3 phases. */ -static int transition_fid_vid(struct powernow_k8_data *data, - u32 reqfid, u32 reqvid) -{ - if (core_voltage_pre_transition(data, reqvid, reqfid)) - return 1; - - if (core_frequency_transition(data, reqfid)) - return 1; - - if (core_voltage_post_transition(data, reqvid)) - return 1; - - if (query_current_values_with_pending_wait(data)) - return 1; - - if ((reqfid != data->currfid) || (reqvid != data->currvid)) { - printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, " - "curr 0x%x 0x%x\n", - smp_processor_id(), - reqfid, reqvid, data->currfid, data->currvid); - return 1; - } - - dprintk("transitioned (cpu%d): new fid 0x%x, vid 0x%x\n", - smp_processor_id(), data->currfid, data->currvid); - - return 0; -} - -/* Phase 1 - core voltage transition ... setup voltage */ -static int core_voltage_pre_transition(struct powernow_k8_data *data, - u32 reqvid, u32 reqfid) -{ - u32 rvosteps = data->rvo; - u32 savefid = data->currfid; - u32 maxvid, lo, rvomult = 1; - - dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, " - "reqvid 0x%x, rvo 0x%x\n", - smp_processor_id(), - data->currfid, data->currvid, reqvid, data->rvo); - - if ((savefid < LO_FID_TABLE_TOP) && (reqfid < LO_FID_TABLE_TOP)) - rvomult = 2; - rvosteps *= rvomult; - rdmsr(MSR_FIDVID_STATUS, lo, maxvid); - maxvid = 0x1f & (maxvid >> 16); - dprintk("ph1 maxvid=0x%x\n", maxvid); - if (reqvid < maxvid) /* lower numbers are higher voltages */ - reqvid = maxvid; - - while (data->currvid > reqvid) { - dprintk("ph1: curr 0x%x, req vid 0x%x\n", - data->currvid, reqvid); - if (decrease_vid_code_by_step(data, reqvid, data->vidmvs)) - return 1; - } - - while ((rvosteps > 0) && - ((rvomult * data->rvo + data->currvid) > reqvid)) { - if (data->currvid == maxvid) { - rvosteps = 0; - } else { - dprintk("ph1: changing vid for rvo, req 0x%x\n", - data->currvid - 1); - if (decrease_vid_code_by_step(data, data->currvid-1, 1)) - return 1; - rvosteps--; - } - } - - if (query_current_values_with_pending_wait(data)) - return 1; - - if (savefid != data->currfid) { - printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n", - data->currfid); - return 1; - } - - dprintk("ph1 complete, currfid 0x%x, currvid 0x%x\n", - data->currfid, data->currvid); - - return 0; -} - -/* Phase 2 - core frequency transition */ -static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) -{ - u32 vcoreqfid, vcocurrfid, vcofiddiff; - u32 fid_interval, savevid = data->currvid; - - if (data->currfid == reqfid) { - printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n", - data->currfid); - return 0; - } - - dprintk("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, " - "reqfid 0x%x\n", - smp_processor_id(), - data->currfid, data->currvid, reqfid); - - vcoreqfid = convert_fid_to_vco_fid(reqfid); - vcocurrfid = convert_fid_to_vco_fid(data->currfid); - vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid - : vcoreqfid - vcocurrfid; - - if ((reqfid <= LO_FID_TABLE_TOP) && (data->currfid <= LO_FID_TABLE_TOP)) - vcofiddiff = 0; - - while (vcofiddiff > 2) { - (data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2); - - if (reqfid > data->currfid) { - if (data->currfid > LO_FID_TABLE_TOP) { - if (write_new_fid(data, - data->currfid + fid_interval)) - return 1; - } else { - if (write_new_fid - (data, - 2 + convert_fid_to_vco_fid(data->currfid))) - return 1; - } - } else { - if (write_new_fid(data, data->currfid - fid_interval)) - return 1; - } - - vcocurrfid = convert_fid_to_vco_fid(data->currfid); - vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid - : vcoreqfid - vcocurrfid; - } - - if (write_new_fid(data, reqfid)) - return 1; - - if (query_current_values_with_pending_wait(data)) - return 1; - - if (data->currfid != reqfid) { - printk(KERN_ERR PFX - "ph2: mismatch, failed fid transition, " - "curr 0x%x, req 0x%x\n", - data->currfid, reqfid); - return 1; - } - - if (savevid != data->currvid) { - printk(KERN_ERR PFX "ph2: vid changed, save 0x%x, curr 0x%x\n", - savevid, data->currvid); - return 1; - } - - dprintk("ph2 complete, currfid 0x%x, currvid 0x%x\n", - data->currfid, data->currvid); - - return 0; -} - -/* Phase 3 - core voltage transition flow ... jump to the final vid. */ -static int core_voltage_post_transition(struct powernow_k8_data *data, - u32 reqvid) -{ - u32 savefid = data->currfid; - u32 savereqvid = reqvid; - - dprintk("ph3 (cpu%d): starting, currfid 0x%x, currvid 0x%x\n", - smp_processor_id(), - data->currfid, data->currvid); - - if (reqvid != data->currvid) { - if (write_new_vid(data, reqvid)) - return 1; - - if (savefid != data->currfid) { - printk(KERN_ERR PFX - "ph3: bad fid change, save 0x%x, curr 0x%x\n", - savefid, data->currfid); - return 1; - } - - if (data->currvid != reqvid) { - printk(KERN_ERR PFX - "ph3: failed vid transition\n, " - "req 0x%x, curr 0x%x", - reqvid, data->currvid); - return 1; - } - } - - if (query_current_values_with_pending_wait(data)) - return 1; - - if (savereqvid != data->currvid) { - dprintk("ph3 failed, currvid 0x%x\n", data->currvid); - return 1; - } - - if (savefid != data->currfid) { - dprintk("ph3 failed, currfid changed 0x%x\n", - data->currfid); - return 1; - } - - dprintk("ph3 complete, currfid 0x%x, currvid 0x%x\n", - data->currfid, data->currvid); - - return 0; -} - -static void check_supported_cpu(void *_rc) -{ - u32 eax, ebx, ecx, edx; - int *rc = _rc; - - *rc = -ENODEV; - - if (__this_cpu_read(cpu_info.x86_vendor) != X86_VENDOR_AMD) - return; - - eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - if (((eax & CPUID_XFAM) != CPUID_XFAM_K8) && - ((eax & CPUID_XFAM) < CPUID_XFAM_10H)) - return; - - if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) { - if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) || - ((eax & CPUID_XMOD) > CPUID_XMOD_REV_MASK)) { - printk(KERN_INFO PFX - "Processor cpuid %x not supported\n", eax); - return; - } - - eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES); - if (eax < CPUID_FREQ_VOLT_CAPABILITIES) { - printk(KERN_INFO PFX - "No frequency change capabilities detected\n"); - return; - } - - cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx); - if ((edx & P_STATE_TRANSITION_CAPABLE) - != P_STATE_TRANSITION_CAPABLE) { - printk(KERN_INFO PFX - "Power state transitions not supported\n"); - return; - } - } else { /* must be a HW Pstate capable processor */ - cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx); - if ((edx & USE_HW_PSTATE) == USE_HW_PSTATE) - cpu_family = CPU_HW_PSTATE; - else - return; - } - - *rc = 0; -} - -static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, - u8 maxvid) -{ - unsigned int j; - u8 lastfid = 0xff; - - for (j = 0; j < data->numps; j++) { - if (pst[j].vid > LEAST_VID) { - printk(KERN_ERR FW_BUG PFX "vid %d invalid : 0x%x\n", - j, pst[j].vid); - return -EINVAL; - } - if (pst[j].vid < data->rvo) { - /* vid + rvo >= 0 */ - printk(KERN_ERR FW_BUG PFX "0 vid exceeded with pstate" - " %d\n", j); - return -ENODEV; - } - if (pst[j].vid < maxvid + data->rvo) { - /* vid + rvo >= maxvid */ - printk(KERN_ERR FW_BUG PFX "maxvid exceeded with pstate" - " %d\n", j); - return -ENODEV; - } - if (pst[j].fid > MAX_FID) { - printk(KERN_ERR FW_BUG PFX "maxfid exceeded with pstate" - " %d\n", j); - return -ENODEV; - } - if (j && (pst[j].fid < HI_FID_TABLE_BOTTOM)) { - /* Only first fid is allowed to be in "low" range */ - printk(KERN_ERR FW_BUG PFX "two low fids - %d : " - "0x%x\n", j, pst[j].fid); - return -EINVAL; - } - if (pst[j].fid < lastfid) - lastfid = pst[j].fid; - } - if (lastfid & 1) { - printk(KERN_ERR FW_BUG PFX "lastfid invalid\n"); - return -EINVAL; - } - if (lastfid > LO_FID_TABLE_TOP) - printk(KERN_INFO FW_BUG PFX - "first fid not from lo freq table\n"); - - return 0; -} - -static void invalidate_entry(struct cpufreq_frequency_table *powernow_table, - unsigned int entry) -{ - powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID; -} - -static void print_basics(struct powernow_k8_data *data) -{ - int j; - for (j = 0; j < data->numps; j++) { - if (data->powernow_table[j].frequency != - CPUFREQ_ENTRY_INVALID) { - if (cpu_family == CPU_HW_PSTATE) { - printk(KERN_INFO PFX - " %d : pstate %d (%d MHz)\n", j, - data->powernow_table[j].index, - data->powernow_table[j].frequency/1000); - } else { - printk(KERN_INFO PFX - "fid 0x%x (%d MHz), vid 0x%x\n", - data->powernow_table[j].index & 0xff, - data->powernow_table[j].frequency/1000, - data->powernow_table[j].index >> 8); - } - } - } - if (data->batps) - printk(KERN_INFO PFX "Only %d pstates on battery\n", - data->batps); -} - -static u32 freq_from_fid_did(u32 fid, u32 did) -{ - u32 mhz = 0; - - if (boot_cpu_data.x86 == 0x10) - mhz = (100 * (fid + 0x10)) >> did; - else if (boot_cpu_data.x86 == 0x11) - mhz = (100 * (fid + 8)) >> did; - else - BUG(); - - return mhz * 1000; -} - -static int fill_powernow_table(struct powernow_k8_data *data, - struct pst_s *pst, u8 maxvid) -{ - struct cpufreq_frequency_table *powernow_table; - unsigned int j; - - if (data->batps) { - /* use ACPI support to get full speed on mains power */ - printk(KERN_WARNING PFX - "Only %d pstates usable (use ACPI driver for full " - "range\n", data->batps); - data->numps = data->batps; - } - - for (j = 1; j < data->numps; j++) { - if (pst[j-1].fid >= pst[j].fid) { - printk(KERN_ERR PFX "PST out of sequence\n"); - return -EINVAL; - } - } - - if (data->numps < 2) { - printk(KERN_ERR PFX "no p states to transition\n"); - return -ENODEV; - } - - if (check_pst_table(data, pst, maxvid)) - return -EINVAL; - - powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table) - * (data->numps + 1)), GFP_KERNEL); - if (!powernow_table) { - printk(KERN_ERR PFX "powernow_table memory alloc failure\n"); - return -ENOMEM; - } - - for (j = 0; j < data->numps; j++) { - int freq; - powernow_table[j].index = pst[j].fid; /* lower 8 bits */ - powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */ - freq = find_khz_freq_from_fid(pst[j].fid); - powernow_table[j].frequency = freq; - } - powernow_table[data->numps].frequency = CPUFREQ_TABLE_END; - powernow_table[data->numps].index = 0; - - if (query_current_values_with_pending_wait(data)) { - kfree(powernow_table); - return -EIO; - } - - dprintk("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid); - data->powernow_table = powernow_table; - if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu) - print_basics(data); - - for (j = 0; j < data->numps; j++) - if ((pst[j].fid == data->currfid) && - (pst[j].vid == data->currvid)) - return 0; - - dprintk("currfid/vid do not match PST, ignoring\n"); - return 0; -} - -/* Find and validate the PSB/PST table in BIOS. */ -static int find_psb_table(struct powernow_k8_data *data) -{ - struct psb_s *psb; - unsigned int i; - u32 mvs; - u8 maxvid; - u32 cpst = 0; - u32 thiscpuid; - - for (i = 0xc0000; i < 0xffff0; i += 0x10) { - /* Scan BIOS looking for the signature. */ - /* It can not be at ffff0 - it is too big. */ - - psb = phys_to_virt(i); - if (memcmp(psb, PSB_ID_STRING, PSB_ID_STRING_LEN) != 0) - continue; - - dprintk("found PSB header at 0x%p\n", psb); - - dprintk("table vers: 0x%x\n", psb->tableversion); - if (psb->tableversion != PSB_VERSION_1_4) { - printk(KERN_ERR FW_BUG PFX "PSB table is not v1.4\n"); - return -ENODEV; - } - - dprintk("flags: 0x%x\n", psb->flags1); - if (psb->flags1) { - printk(KERN_ERR FW_BUG PFX "unknown flags\n"); - return -ENODEV; - } - - data->vstable = psb->vstable; - dprintk("voltage stabilization time: %d(*20us)\n", - data->vstable); - - dprintk("flags2: 0x%x\n", psb->flags2); - data->rvo = psb->flags2 & 3; - data->irt = ((psb->flags2) >> 2) & 3; - mvs = ((psb->flags2) >> 4) & 3; - data->vidmvs = 1 << mvs; - data->batps = ((psb->flags2) >> 6) & 3; - - dprintk("ramp voltage offset: %d\n", data->rvo); - dprintk("isochronous relief time: %d\n", data->irt); - dprintk("maximum voltage step: %d - 0x%x\n", mvs, data->vidmvs); - - dprintk("numpst: 0x%x\n", psb->num_tables); - cpst = psb->num_tables; - if ((psb->cpuid == 0x00000fc0) || - (psb->cpuid == 0x00000fe0)) { - thiscpuid = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - if ((thiscpuid == 0x00000fc0) || - (thiscpuid == 0x00000fe0)) - cpst = 1; - } - if (cpst != 1) { - printk(KERN_ERR FW_BUG PFX "numpst must be 1\n"); - return -ENODEV; - } - - data->plllock = psb->plllocktime; - dprintk("plllocktime: 0x%x (units 1us)\n", psb->plllocktime); - dprintk("maxfid: 0x%x\n", psb->maxfid); - dprintk("maxvid: 0x%x\n", psb->maxvid); - maxvid = psb->maxvid; - - data->numps = psb->numps; - dprintk("numpstates: 0x%x\n", data->numps); - return fill_powernow_table(data, - (struct pst_s *)(psb+1), maxvid); - } - /* - * If you see this message, complain to BIOS manufacturer. If - * he tells you "we do not support Linux" or some similar - * nonsense, remember that Windows 2000 uses the same legacy - * mechanism that the old Linux PSB driver uses. Tell them it - * is broken with Windows 2000. - * - * The reference to the AMD documentation is chapter 9 in the - * BIOS and Kernel Developer's Guide, which is available on - * www.amd.com - */ - printk(KERN_ERR FW_BUG PFX "No PSB or ACPI _PSS objects\n"); - printk(KERN_ERR PFX "Make sure that your BIOS is up to date" - " and Cool'N'Quiet support is enabled in BIOS setup\n"); - return -ENODEV; -} - -static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, - unsigned int index) -{ - u64 control; - - if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE)) - return; - - control = data->acpi_data.states[index].control; - data->irt = (control >> IRT_SHIFT) & IRT_MASK; - data->rvo = (control >> RVO_SHIFT) & RVO_MASK; - data->exttype = (control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK; - data->plllock = (control >> PLL_L_SHIFT) & PLL_L_MASK; - data->vidmvs = 1 << ((control >> MVS_SHIFT) & MVS_MASK); - data->vstable = (control >> VST_SHIFT) & VST_MASK; -} - -static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) -{ - struct cpufreq_frequency_table *powernow_table; - int ret_val = -ENODEV; - u64 control, status; - - if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) { - dprintk("register performance failed: bad ACPI data\n"); - return -EIO; - } - - /* verify the data contained in the ACPI structures */ - if (data->acpi_data.state_count <= 1) { - dprintk("No ACPI P-States\n"); - goto err_out; - } - - control = data->acpi_data.control_register.space_id; - status = data->acpi_data.status_register.space_id; - - if ((control != ACPI_ADR_SPACE_FIXED_HARDWARE) || - (status != ACPI_ADR_SPACE_FIXED_HARDWARE)) { - dprintk("Invalid control/status registers (%x - %x)\n", - control, status); - goto err_out; - } - - /* fill in data->powernow_table */ - powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table) - * (data->acpi_data.state_count + 1)), GFP_KERNEL); - if (!powernow_table) { - dprintk("powernow_table memory alloc failure\n"); - goto err_out; - } - - /* fill in data */ - data->numps = data->acpi_data.state_count; - powernow_k8_acpi_pst_values(data, 0); - - if (cpu_family == CPU_HW_PSTATE) - ret_val = fill_powernow_table_pstate(data, powernow_table); - else - ret_val = fill_powernow_table_fidvid(data, powernow_table); - if (ret_val) - goto err_out_mem; - - powernow_table[data->acpi_data.state_count].frequency = - CPUFREQ_TABLE_END; - powernow_table[data->acpi_data.state_count].index = 0; - data->powernow_table = powernow_table; - - if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu) - print_basics(data); - - /* notify BIOS that we exist */ - acpi_processor_notify_smm(THIS_MODULE); - - if (!zalloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) { - printk(KERN_ERR PFX - "unable to alloc powernow_k8_data cpumask\n"); - ret_val = -ENOMEM; - goto err_out_mem; - } - - return 0; - -err_out_mem: - kfree(powernow_table); - -err_out: - acpi_processor_unregister_performance(&data->acpi_data, data->cpu); - - /* data->acpi_data.state_count informs us at ->exit() - * whether ACPI was used */ - data->acpi_data.state_count = 0; - - return ret_val; -} - -static int fill_powernow_table_pstate(struct powernow_k8_data *data, - struct cpufreq_frequency_table *powernow_table) -{ - int i; - u32 hi = 0, lo = 0; - rdmsr(MSR_PSTATE_CUR_LIMIT, lo, hi); - data->max_hw_pstate = (lo & HW_PSTATE_MAX_MASK) >> HW_PSTATE_MAX_SHIFT; - - for (i = 0; i < data->acpi_data.state_count; i++) { - u32 index; - - index = data->acpi_data.states[i].control & HW_PSTATE_MASK; - if (index > data->max_hw_pstate) { - printk(KERN_ERR PFX "invalid pstate %d - " - "bad value %d.\n", i, index); - printk(KERN_ERR PFX "Please report to BIOS " - "manufacturer\n"); - invalidate_entry(powernow_table, i); - continue; - } - rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi); - if (!(hi & HW_PSTATE_VALID_MASK)) { - dprintk("invalid pstate %d, ignoring\n", index); - invalidate_entry(powernow_table, i); - continue; - } - - powernow_table[i].index = index; - - /* Frequency may be rounded for these */ - if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10) - || boot_cpu_data.x86 == 0x11) { - powernow_table[i].frequency = - freq_from_fid_did(lo & 0x3f, (lo >> 6) & 7); - } else - powernow_table[i].frequency = - data->acpi_data.states[i].core_frequency * 1000; - } - return 0; -} - -static int fill_powernow_table_fidvid(struct powernow_k8_data *data, - struct cpufreq_frequency_table *powernow_table) -{ - int i; - - for (i = 0; i < data->acpi_data.state_count; i++) { - u32 fid; - u32 vid; - u32 freq, index; - u64 status, control; - - if (data->exttype) { - status = data->acpi_data.states[i].status; - fid = status & EXT_FID_MASK; - vid = (status >> VID_SHIFT) & EXT_VID_MASK; - } else { - control = data->acpi_data.states[i].control; - fid = control & FID_MASK; - vid = (control >> VID_SHIFT) & VID_MASK; - } - - dprintk(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid); - - index = fid | (vid<<8); - powernow_table[i].index = index; - - freq = find_khz_freq_from_fid(fid); - powernow_table[i].frequency = freq; - - /* verify frequency is OK */ - if ((freq > (MAX_FREQ * 1000)) || (freq < (MIN_FREQ * 1000))) { - dprintk("invalid freq %u kHz, ignoring\n", freq); - invalidate_entry(powernow_table, i); - continue; - } - - /* verify voltage is OK - - * BIOSs are using "off" to indicate invalid */ - if (vid == VID_OFF) { - dprintk("invalid vid %u, ignoring\n", vid); - invalidate_entry(powernow_table, i); - continue; - } - - if (freq != (data->acpi_data.states[i].core_frequency * 1000)) { - printk(KERN_INFO PFX "invalid freq entries " - "%u kHz vs. %u kHz\n", freq, - (unsigned int) - (data->acpi_data.states[i].core_frequency - * 1000)); - invalidate_entry(powernow_table, i); - continue; - } - } - return 0; -} - -static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) -{ - if (data->acpi_data.state_count) - acpi_processor_unregister_performance(&data->acpi_data, - data->cpu); - free_cpumask_var(data->acpi_data.shared_cpu_map); -} - -static int get_transition_latency(struct powernow_k8_data *data) -{ - int max_latency = 0; - int i; - for (i = 0; i < data->acpi_data.state_count; i++) { - int cur_latency = data->acpi_data.states[i].transition_latency - + data->acpi_data.states[i].bus_master_latency; - if (cur_latency > max_latency) - max_latency = cur_latency; - } - if (max_latency == 0) { - /* - * Fam 11h and later may return 0 as transition latency. This - * is intended and means "very fast". While cpufreq core and - * governors currently can handle that gracefully, better set it - * to 1 to avoid problems in the future. - */ - if (boot_cpu_data.x86 < 0x11) - printk(KERN_ERR FW_WARN PFX "Invalid zero transition " - "latency\n"); - max_latency = 1; - } - /* value in usecs, needs to be in nanoseconds */ - return 1000 * max_latency; -} - -/* Take a frequency, and issue the fid/vid transition command */ -static int transition_frequency_fidvid(struct powernow_k8_data *data, - unsigned int index) -{ - u32 fid = 0; - u32 vid = 0; - int res, i; - struct cpufreq_freqs freqs; - - dprintk("cpu %d transition to index %u\n", smp_processor_id(), index); - - /* fid/vid correctness check for k8 */ - /* fid are the lower 8 bits of the index we stored into - * the cpufreq frequency table in find_psb_table, vid - * are the upper 8 bits. - */ - fid = data->powernow_table[index].index & 0xFF; - vid = (data->powernow_table[index].index & 0xFF00) >> 8; - - dprintk("table matched fid 0x%x, giving vid 0x%x\n", fid, vid); - - if (query_current_values_with_pending_wait(data)) - return 1; - - if ((data->currvid == vid) && (data->currfid == fid)) { - dprintk("target matches current values (fid 0x%x, vid 0x%x)\n", - fid, vid); - return 0; - } - - dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n", - smp_processor_id(), fid, vid); - freqs.old = find_khz_freq_from_fid(data->currfid); - freqs.new = find_khz_freq_from_fid(fid); - - for_each_cpu(i, data->available_cores) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - } - - res = transition_fid_vid(data, fid, vid); - freqs.new = find_khz_freq_from_fid(data->currfid); - - for_each_cpu(i, data->available_cores) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - return res; -} - -/* Take a frequency, and issue the hardware pstate transition command */ -static int transition_frequency_pstate(struct powernow_k8_data *data, - unsigned int index) -{ - u32 pstate = 0; - int res, i; - struct cpufreq_freqs freqs; - - dprintk("cpu %d transition to index %u\n", smp_processor_id(), index); - - /* get MSR index for hardware pstate transition */ - pstate = index & HW_PSTATE_MASK; - if (pstate > data->max_hw_pstate) - return 0; - freqs.old = find_khz_freq_from_pstate(data->powernow_table, - data->currpstate); - freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); - - for_each_cpu(i, data->available_cores) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - } - - res = transition_pstate(data, pstate); - freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); - - for_each_cpu(i, data->available_cores) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - return res; -} - -/* Driver entry point to switch to the target frequency */ -static int powernowk8_target(struct cpufreq_policy *pol, - unsigned targfreq, unsigned relation) -{ - cpumask_var_t oldmask; - struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); - u32 checkfid; - u32 checkvid; - unsigned int newstate; - int ret = -EIO; - - if (!data) - return -EINVAL; - - checkfid = data->currfid; - checkvid = data->currvid; - - /* only run on specific CPU from here on. */ - /* This is poor form: use a workqueue or smp_call_function_single */ - if (!alloc_cpumask_var(&oldmask, GFP_KERNEL)) - return -ENOMEM; - - cpumask_copy(oldmask, tsk_cpus_allowed(current)); - set_cpus_allowed_ptr(current, cpumask_of(pol->cpu)); - - if (smp_processor_id() != pol->cpu) { - printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu); - goto err_out; - } - - if (pending_bit_stuck()) { - printk(KERN_ERR PFX "failing targ, change pending bit set\n"); - goto err_out; - } - - dprintk("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n", - pol->cpu, targfreq, pol->min, pol->max, relation); - - if (query_current_values_with_pending_wait(data)) - goto err_out; - - if (cpu_family != CPU_HW_PSTATE) { - dprintk("targ: curr fid 0x%x, vid 0x%x\n", - data->currfid, data->currvid); - - if ((checkvid != data->currvid) || - (checkfid != data->currfid)) { - printk(KERN_INFO PFX - "error - out of sync, fix 0x%x 0x%x, " - "vid 0x%x 0x%x\n", - checkfid, data->currfid, - checkvid, data->currvid); - } - } - - if (cpufreq_frequency_table_target(pol, data->powernow_table, - targfreq, relation, &newstate)) - goto err_out; - - mutex_lock(&fidvid_mutex); - - powernow_k8_acpi_pst_values(data, newstate); - - if (cpu_family == CPU_HW_PSTATE) - ret = transition_frequency_pstate(data, newstate); - else - ret = transition_frequency_fidvid(data, newstate); - if (ret) { - printk(KERN_ERR PFX "transition frequency failed\n"); - ret = 1; - mutex_unlock(&fidvid_mutex); - goto err_out; - } - mutex_unlock(&fidvid_mutex); - - if (cpu_family == CPU_HW_PSTATE) - pol->cur = find_khz_freq_from_pstate(data->powernow_table, - newstate); - else - pol->cur = find_khz_freq_from_fid(data->currfid); - ret = 0; - -err_out: - set_cpus_allowed_ptr(current, oldmask); - free_cpumask_var(oldmask); - return ret; -} - -/* Driver entry point to verify the policy and range of frequencies */ -static int powernowk8_verify(struct cpufreq_policy *pol) -{ - struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); - - if (!data) - return -EINVAL; - - return cpufreq_frequency_table_verify(pol, data->powernow_table); -} - -struct init_on_cpu { - struct powernow_k8_data *data; - int rc; -}; - -static void __cpuinit powernowk8_cpu_init_on_cpu(void *_init_on_cpu) -{ - struct init_on_cpu *init_on_cpu = _init_on_cpu; - - if (pending_bit_stuck()) { - printk(KERN_ERR PFX "failing init, change pending bit set\n"); - init_on_cpu->rc = -ENODEV; - return; - } - - if (query_current_values_with_pending_wait(init_on_cpu->data)) { - init_on_cpu->rc = -ENODEV; - return; - } - - if (cpu_family == CPU_OPTERON) - fidvid_msr_init(); - - init_on_cpu->rc = 0; -} - -/* per CPU init entry point to the driver */ -static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) -{ - static const char ACPI_PSS_BIOS_BUG_MSG[] = - KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n" - FW_BUG PFX "Try again with latest BIOS.\n"; - struct powernow_k8_data *data; - struct init_on_cpu init_on_cpu; - int rc; - struct cpuinfo_x86 *c = &cpu_data(pol->cpu); - - if (!cpu_online(pol->cpu)) - return -ENODEV; - - smp_call_function_single(pol->cpu, check_supported_cpu, &rc, 1); - if (rc) - return -ENODEV; - - data = kzalloc(sizeof(struct powernow_k8_data), GFP_KERNEL); - if (!data) { - printk(KERN_ERR PFX "unable to alloc powernow_k8_data"); - return -ENOMEM; - } - - data->cpu = pol->cpu; - data->currpstate = HW_PSTATE_INVALID; - - if (powernow_k8_cpu_init_acpi(data)) { - /* - * Use the PSB BIOS structure. This is only available on - * an UP version, and is deprecated by AMD. - */ - if (num_online_cpus() != 1) { - printk_once(ACPI_PSS_BIOS_BUG_MSG); - goto err_out; - } - if (pol->cpu != 0) { - printk(KERN_ERR FW_BUG PFX "No ACPI _PSS objects for " - "CPU other than CPU0. Complain to your BIOS " - "vendor.\n"); - goto err_out; - } - rc = find_psb_table(data); - if (rc) - goto err_out; - - /* Take a crude guess here. - * That guess was in microseconds, so multiply with 1000 */ - pol->cpuinfo.transition_latency = ( - ((data->rvo + 8) * data->vstable * VST_UNITS_20US) + - ((1 << data->irt) * 30)) * 1000; - } else /* ACPI _PSS objects available */ - pol->cpuinfo.transition_latency = get_transition_latency(data); - - /* only run on specific CPU from here on */ - init_on_cpu.data = data; - smp_call_function_single(data->cpu, powernowk8_cpu_init_on_cpu, - &init_on_cpu, 1); - rc = init_on_cpu.rc; - if (rc != 0) - goto err_out_exit_acpi; - - if (cpu_family == CPU_HW_PSTATE) - cpumask_copy(pol->cpus, cpumask_of(pol->cpu)); - else - cpumask_copy(pol->cpus, cpu_core_mask(pol->cpu)); - data->available_cores = pol->cpus; - - if (cpu_family == CPU_HW_PSTATE) - pol->cur = find_khz_freq_from_pstate(data->powernow_table, - data->currpstate); - else - pol->cur = find_khz_freq_from_fid(data->currfid); - dprintk("policy current frequency %d kHz\n", pol->cur); - - /* min/max the cpu is capable of */ - if (cpufreq_frequency_table_cpuinfo(pol, data->powernow_table)) { - printk(KERN_ERR FW_BUG PFX "invalid powernow_table\n"); - powernow_k8_cpu_exit_acpi(data); - kfree(data->powernow_table); - kfree(data); - return -EINVAL; - } - - /* Check for APERF/MPERF support in hardware */ - if (cpu_has(c, X86_FEATURE_APERFMPERF)) - cpufreq_amd64_driver.getavg = cpufreq_get_measured_perf; - - cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu); - - if (cpu_family == CPU_HW_PSTATE) - dprintk("cpu_init done, current pstate 0x%x\n", - data->currpstate); - else - dprintk("cpu_init done, current fid 0x%x, vid 0x%x\n", - data->currfid, data->currvid); - - per_cpu(powernow_data, pol->cpu) = data; - - return 0; - -err_out_exit_acpi: - powernow_k8_cpu_exit_acpi(data); - -err_out: - kfree(data); - return -ENODEV; -} - -static int __devexit powernowk8_cpu_exit(struct cpufreq_policy *pol) -{ - struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); - - if (!data) - return -EINVAL; - - powernow_k8_cpu_exit_acpi(data); - - cpufreq_frequency_table_put_attr(pol->cpu); - - kfree(data->powernow_table); - kfree(data); - per_cpu(powernow_data, pol->cpu) = NULL; - - return 0; -} - -static void query_values_on_cpu(void *_err) -{ - int *err = _err; - struct powernow_k8_data *data = __this_cpu_read(powernow_data); - - *err = query_current_values_with_pending_wait(data); -} - -static unsigned int powernowk8_get(unsigned int cpu) -{ - struct powernow_k8_data *data = per_cpu(powernow_data, cpu); - unsigned int khz = 0; - int err; - - if (!data) - return 0; - - smp_call_function_single(cpu, query_values_on_cpu, &err, true); - if (err) - goto out; - - if (cpu_family == CPU_HW_PSTATE) - khz = find_khz_freq_from_pstate(data->powernow_table, - data->currpstate); - else - khz = find_khz_freq_from_fid(data->currfid); - - -out: - return khz; -} - -static void _cpb_toggle_msrs(bool t) -{ - int cpu; - - get_online_cpus(); - - rdmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs); - - for_each_cpu(cpu, cpu_online_mask) { - struct msr *reg = per_cpu_ptr(msrs, cpu); - if (t) - reg->l &= ~BIT(25); - else - reg->l |= BIT(25); - } - wrmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs); - - put_online_cpus(); -} - -/* - * Switch on/off core performance boosting. - * - * 0=disable - * 1=enable. - */ -static void cpb_toggle(bool t) -{ - if (!cpb_capable) - return; - - if (t && !cpb_enabled) { - cpb_enabled = true; - _cpb_toggle_msrs(t); - printk(KERN_INFO PFX "Core Boosting enabled.\n"); - } else if (!t && cpb_enabled) { - cpb_enabled = false; - _cpb_toggle_msrs(t); - printk(KERN_INFO PFX "Core Boosting disabled.\n"); - } -} - -static ssize_t store_cpb(struct cpufreq_policy *policy, const char *buf, - size_t count) -{ - int ret = -EINVAL; - unsigned long val = 0; - - ret = strict_strtoul(buf, 10, &val); - if (!ret && (val == 0 || val == 1) && cpb_capable) - cpb_toggle(val); - else - return -EINVAL; - - return count; -} - -static ssize_t show_cpb(struct cpufreq_policy *policy, char *buf) -{ - return sprintf(buf, "%u\n", cpb_enabled); -} - -#define define_one_rw(_name) \ -static struct freq_attr _name = \ -__ATTR(_name, 0644, show_##_name, store_##_name) - -define_one_rw(cpb); - -static struct freq_attr *powernow_k8_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - &cpb, - NULL, -}; - -static struct cpufreq_driver cpufreq_amd64_driver = { - .verify = powernowk8_verify, - .target = powernowk8_target, - .bios_limit = acpi_processor_get_bios_limit, - .init = powernowk8_cpu_init, - .exit = __devexit_p(powernowk8_cpu_exit), - .get = powernowk8_get, - .name = "powernow-k8", - .owner = THIS_MODULE, - .attr = powernow_k8_attr, -}; - -/* - * Clear the boost-disable flag on the CPU_DOWN path so that this cpu - * cannot block the remaining ones from boosting. On the CPU_UP path we - * simply keep the boost-disable flag in sync with the current global - * state. - */ -static int cpb_notify(struct notifier_block *nb, unsigned long action, - void *hcpu) -{ - unsigned cpu = (long)hcpu; - u32 lo, hi; - - switch (action) { - case CPU_UP_PREPARE: - case CPU_UP_PREPARE_FROZEN: - - if (!cpb_enabled) { - rdmsr_on_cpu(cpu, MSR_K7_HWCR, &lo, &hi); - lo |= BIT(25); - wrmsr_on_cpu(cpu, MSR_K7_HWCR, lo, hi); - } - break; - - case CPU_DOWN_PREPARE: - case CPU_DOWN_PREPARE_FROZEN: - rdmsr_on_cpu(cpu, MSR_K7_HWCR, &lo, &hi); - lo &= ~BIT(25); - wrmsr_on_cpu(cpu, MSR_K7_HWCR, lo, hi); - break; - - default: - break; - } - - return NOTIFY_OK; -} - -static struct notifier_block cpb_nb = { - .notifier_call = cpb_notify, -}; - -/* driver entry point for init */ -static int __cpuinit powernowk8_init(void) -{ - unsigned int i, supported_cpus = 0, cpu; - int rv; - - for_each_online_cpu(i) { - int rc; - smp_call_function_single(i, check_supported_cpu, &rc, 1); - if (rc == 0) - supported_cpus++; - } - - if (supported_cpus != num_online_cpus()) - return -ENODEV; - - printk(KERN_INFO PFX "Found %d %s (%d cpu cores) (" VERSION ")\n", - num_online_nodes(), boot_cpu_data.x86_model_id, supported_cpus); - - if (boot_cpu_has(X86_FEATURE_CPB)) { - - cpb_capable = true; - - msrs = msrs_alloc(); - if (!msrs) { - printk(KERN_ERR "%s: Error allocating msrs!\n", __func__); - return -ENOMEM; - } - - register_cpu_notifier(&cpb_nb); - - rdmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs); - - for_each_cpu(cpu, cpu_online_mask) { - struct msr *reg = per_cpu_ptr(msrs, cpu); - cpb_enabled |= !(!!(reg->l & BIT(25))); - } - - printk(KERN_INFO PFX "Core Performance Boosting: %s.\n", - (cpb_enabled ? "on" : "off")); - } - - rv = cpufreq_register_driver(&cpufreq_amd64_driver); - if (rv < 0 && boot_cpu_has(X86_FEATURE_CPB)) { - unregister_cpu_notifier(&cpb_nb); - msrs_free(msrs); - msrs = NULL; - } - return rv; -} - -/* driver entry point for term */ -static void __exit powernowk8_exit(void) -{ - dprintk("exit\n"); - - if (boot_cpu_has(X86_FEATURE_CPB)) { - msrs_free(msrs); - msrs = NULL; - - unregister_cpu_notifier(&cpb_nb); - } - - cpufreq_unregister_driver(&cpufreq_amd64_driver); -} - -MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and " - "Mark Langsdorf <mark.langsdorf@amd.com>"); -MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver."); -MODULE_LICENSE("GPL"); - -late_initcall(powernowk8_init); -module_exit(powernowk8_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h deleted file mode 100644 index df3529b1c02..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h +++ /dev/null @@ -1,224 +0,0 @@ -/* - * (c) 2003-2006 Advanced Micro Devices, Inc. - * Your use of this code is subject to the terms and conditions of the - * GNU general public license version 2. See "COPYING" or - * http://www.gnu.org/licenses/gpl.html - */ - -enum pstate { - HW_PSTATE_INVALID = 0xff, - HW_PSTATE_0 = 0, - HW_PSTATE_1 = 1, - HW_PSTATE_2 = 2, - HW_PSTATE_3 = 3, - HW_PSTATE_4 = 4, - HW_PSTATE_5 = 5, - HW_PSTATE_6 = 6, - HW_PSTATE_7 = 7, -}; - -struct powernow_k8_data { - unsigned int cpu; - - u32 numps; /* number of p-states */ - u32 batps; /* number of p-states supported on battery */ - u32 max_hw_pstate; /* maximum legal hardware pstate */ - - /* these values are constant when the PSB is used to determine - * vid/fid pairings, but are modified during the ->target() call - * when ACPI is used */ - u32 rvo; /* ramp voltage offset */ - u32 irt; /* isochronous relief time */ - u32 vidmvs; /* usable value calculated from mvs */ - u32 vstable; /* voltage stabilization time, units 20 us */ - u32 plllock; /* pll lock time, units 1 us */ - u32 exttype; /* extended interface = 1 */ - - /* keep track of the current fid / vid or pstate */ - u32 currvid; - u32 currfid; - enum pstate currpstate; - - /* the powernow_table includes all frequency and vid/fid pairings: - * fid are the lower 8 bits of the index, vid are the upper 8 bits. - * frequency is in kHz */ - struct cpufreq_frequency_table *powernow_table; - - /* the acpi table needs to be kept. it's only available if ACPI was - * used to determine valid frequency/vid/fid states */ - struct acpi_processor_performance acpi_data; - - /* we need to keep track of associated cores, but let cpufreq - * handle hotplug events - so just point at cpufreq pol->cpus - * structure */ - struct cpumask *available_cores; -}; - -/* processor's cpuid instruction support */ -#define CPUID_PROCESSOR_SIGNATURE 1 /* function 1 */ -#define CPUID_XFAM 0x0ff00000 /* extended family */ -#define CPUID_XFAM_K8 0 -#define CPUID_XMOD 0x000f0000 /* extended model */ -#define CPUID_XMOD_REV_MASK 0x000c0000 -#define CPUID_XFAM_10H 0x00100000 /* family 0x10 */ -#define CPUID_USE_XFAM_XMOD 0x00000f00 -#define CPUID_GET_MAX_CAPABILITIES 0x80000000 -#define CPUID_FREQ_VOLT_CAPABILITIES 0x80000007 -#define P_STATE_TRANSITION_CAPABLE 6 - -/* Model Specific Registers for p-state transitions. MSRs are 64-bit. For */ -/* writes (wrmsr - opcode 0f 30), the register number is placed in ecx, and */ -/* the value to write is placed in edx:eax. For reads (rdmsr - opcode 0f 32), */ -/* the register number is placed in ecx, and the data is returned in edx:eax. */ - -#define MSR_FIDVID_CTL 0xc0010041 -#define MSR_FIDVID_STATUS 0xc0010042 - -/* Field definitions within the FID VID Low Control MSR : */ -#define MSR_C_LO_INIT_FID_VID 0x00010000 -#define MSR_C_LO_NEW_VID 0x00003f00 -#define MSR_C_LO_NEW_FID 0x0000003f -#define MSR_C_LO_VID_SHIFT 8 - -/* Field definitions within the FID VID High Control MSR : */ -#define MSR_C_HI_STP_GNT_TO 0x000fffff - -/* Field definitions within the FID VID Low Status MSR : */ -#define MSR_S_LO_CHANGE_PENDING 0x80000000 /* cleared when completed */ -#define MSR_S_LO_MAX_RAMP_VID 0x3f000000 -#define MSR_S_LO_MAX_FID 0x003f0000 -#define MSR_S_LO_START_FID 0x00003f00 -#define MSR_S_LO_CURRENT_FID 0x0000003f - -/* Field definitions within the FID VID High Status MSR : */ -#define MSR_S_HI_MIN_WORKING_VID 0x3f000000 -#define MSR_S_HI_MAX_WORKING_VID 0x003f0000 -#define MSR_S_HI_START_VID 0x00003f00 -#define MSR_S_HI_CURRENT_VID 0x0000003f -#define MSR_C_HI_STP_GNT_BENIGN 0x00000001 - - -/* Hardware Pstate _PSS and MSR definitions */ -#define USE_HW_PSTATE 0x00000080 -#define HW_PSTATE_MASK 0x00000007 -#define HW_PSTATE_VALID_MASK 0x80000000 -#define HW_PSTATE_MAX_MASK 0x000000f0 -#define HW_PSTATE_MAX_SHIFT 4 -#define MSR_PSTATE_DEF_BASE 0xc0010064 /* base of Pstate MSRs */ -#define MSR_PSTATE_STATUS 0xc0010063 /* Pstate Status MSR */ -#define MSR_PSTATE_CTRL 0xc0010062 /* Pstate control MSR */ -#define MSR_PSTATE_CUR_LIMIT 0xc0010061 /* pstate current limit MSR */ - -/* define the two driver architectures */ -#define CPU_OPTERON 0 -#define CPU_HW_PSTATE 1 - - -/* - * There are restrictions frequencies have to follow: - * - only 1 entry in the low fid table ( <=1.4GHz ) - * - lowest entry in the high fid table must be >= 2 * the entry in the - * low fid table - * - lowest entry in the high fid table must be a <= 200MHz + 2 * the entry - * in the low fid table - * - the parts can only step at <= 200 MHz intervals, odd fid values are - * supported in revision G and later revisions. - * - lowest frequency must be >= interprocessor hypertransport link speed - * (only applies to MP systems obviously) - */ - -/* fids (frequency identifiers) are arranged in 2 tables - lo and hi */ -#define LO_FID_TABLE_TOP 7 /* fid values marking the boundary */ -#define HI_FID_TABLE_BOTTOM 8 /* between the low and high tables */ - -#define LO_VCOFREQ_TABLE_TOP 1400 /* corresponding vco frequency values */ -#define HI_VCOFREQ_TABLE_BOTTOM 1600 - -#define MIN_FREQ_RESOLUTION 200 /* fids jump by 2 matching freq jumps by 200 */ - -#define MAX_FID 0x2a /* Spec only gives FID values as far as 5 GHz */ -#define LEAST_VID 0x3e /* Lowest (numerically highest) useful vid value */ - -#define MIN_FREQ 800 /* Min and max freqs, per spec */ -#define MAX_FREQ 5000 - -#define INVALID_FID_MASK 0xffffffc0 /* not a valid fid if these bits are set */ -#define INVALID_VID_MASK 0xffffffc0 /* not a valid vid if these bits are set */ - -#define VID_OFF 0x3f - -#define STOP_GRANT_5NS 1 /* min poss memory access latency for voltage change */ - -#define PLL_LOCK_CONVERSION (1000/5) /* ms to ns, then divide by clock period */ - -#define MAXIMUM_VID_STEPS 1 /* Current cpus only allow a single step of 25mV */ -#define VST_UNITS_20US 20 /* Voltage Stabilization Time is in units of 20us */ - -/* - * Most values of interest are encoded in a single field of the _PSS - * entries: the "control" value. - */ - -#define IRT_SHIFT 30 -#define RVO_SHIFT 28 -#define EXT_TYPE_SHIFT 27 -#define PLL_L_SHIFT 20 -#define MVS_SHIFT 18 -#define VST_SHIFT 11 -#define VID_SHIFT 6 -#define IRT_MASK 3 -#define RVO_MASK 3 -#define EXT_TYPE_MASK 1 -#define PLL_L_MASK 0x7f -#define MVS_MASK 3 -#define VST_MASK 0x7f -#define VID_MASK 0x1f -#define FID_MASK 0x1f -#define EXT_VID_MASK 0x3f -#define EXT_FID_MASK 0x3f - - -/* - * Version 1.4 of the PSB table. This table is constructed by BIOS and is - * to tell the OS's power management driver which VIDs and FIDs are - * supported by this particular processor. - * If the data in the PSB / PST is wrong, then this driver will program the - * wrong values into hardware, which is very likely to lead to a crash. - */ - -#define PSB_ID_STRING "AMDK7PNOW!" -#define PSB_ID_STRING_LEN 10 - -#define PSB_VERSION_1_4 0x14 - -struct psb_s { - u8 signature[10]; - u8 tableversion; - u8 flags1; - u16 vstable; - u8 flags2; - u8 num_tables; - u32 cpuid; - u8 plllocktime; - u8 maxfid; - u8 maxvid; - u8 numps; -}; - -/* Pairs of fid/vid values are appended to the version 1.4 PSB table. */ -struct pst_s { - u8 fid; - u8 vid; -}; - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k8", msg) - -static int core_voltage_pre_transition(struct powernow_k8_data *data, - u32 reqvid, u32 regfid); -static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid); -static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid); - -static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index); - -static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); -static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); diff --git a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c b/arch/x86/kernel/cpu/cpufreq/sc520_freq.c deleted file mode 100644 index 435a996a613..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * sc520_freq.c: cpufreq driver for the AMD Elan sc520 - * - * Copyright (C) 2005 Sean Young <sean@mess.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Based on elanfreq.c - * - * 2005-03-30: - initial revision - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> - -#include <linux/delay.h> -#include <linux/cpufreq.h> -#include <linux/timex.h> -#include <linux/io.h> - -#include <asm/msr.h> - -#define MMCR_BASE 0xfffef000 /* The default base address */ -#define OFFS_CPUCTL 0x2 /* CPU Control Register */ - -static __u8 __iomem *cpuctl; - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "sc520_freq", msg) -#define PFX "sc520_freq: " - -static struct cpufreq_frequency_table sc520_freq_table[] = { - {0x01, 100000}, - {0x02, 133000}, - {0, CPUFREQ_TABLE_END}, -}; - -static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) -{ - u8 clockspeed_reg = *cpuctl; - - switch (clockspeed_reg & 0x03) { - default: - printk(KERN_ERR PFX "error: cpuctl register has unexpected " - "value %02x\n", clockspeed_reg); - case 0x01: - return 100000; - case 0x02: - return 133000; - } -} - -static void sc520_freq_set_cpu_state(unsigned int state) -{ - - struct cpufreq_freqs freqs; - u8 clockspeed_reg; - - freqs.old = sc520_freq_get_cpu_frequency(0); - freqs.new = sc520_freq_table[state].frequency; - freqs.cpu = 0; /* AMD Elan is UP */ - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - dprintk("attempting to set frequency to %i kHz\n", - sc520_freq_table[state].frequency); - - local_irq_disable(); - - clockspeed_reg = *cpuctl & ~0x03; - *cpuctl = clockspeed_reg | sc520_freq_table[state].index; - - local_irq_enable(); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); -}; - -static int sc520_freq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]); -} - -static int sc520_freq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target(policy, sc520_freq_table, - target_freq, relation, &newstate)) - return -EINVAL; - - sc520_freq_set_cpu_state(newstate); - - return 0; -} - - -/* - * Module init and exit code - */ - -static int sc520_freq_cpu_init(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - int result; - - /* capability check */ - if (c->x86_vendor != X86_VENDOR_AMD || - c->x86 != 4 || c->x86_model != 9) - return -ENODEV; - - /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = 1000000; /* 1ms */ - policy->cur = sc520_freq_get_cpu_frequency(0); - - result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table); - if (result) - return result; - - cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu); - - return 0; -} - - -static int sc520_freq_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - - -static struct freq_attr *sc520_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - - -static struct cpufreq_driver sc520_freq_driver = { - .get = sc520_freq_get_cpu_frequency, - .verify = sc520_freq_verify, - .target = sc520_freq_target, - .init = sc520_freq_cpu_init, - .exit = sc520_freq_cpu_exit, - .name = "sc520_freq", - .owner = THIS_MODULE, - .attr = sc520_freq_attr, -}; - - -static int __init sc520_freq_init(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - int err; - - /* Test if we have the right hardware */ - if (c->x86_vendor != X86_VENDOR_AMD || - c->x86 != 4 || c->x86_model != 9) { - dprintk("no Elan SC520 processor found!\n"); - return -ENODEV; - } - cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1); - if (!cpuctl) { - printk(KERN_ERR "sc520_freq: error: failed to remap memory\n"); - return -ENOMEM; - } - - err = cpufreq_register_driver(&sc520_freq_driver); - if (err) - iounmap(cpuctl); - - return err; -} - - -static void __exit sc520_freq_exit(void) -{ - cpufreq_unregister_driver(&sc520_freq_driver); - iounmap(cpuctl); -} - - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Sean Young <sean@mess.org>"); -MODULE_DESCRIPTION("cpufreq driver for AMD's Elan sc520 CPU"); - -module_init(sc520_freq_init); -module_exit(sc520_freq_exit); - diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c deleted file mode 100644 index 9b1ff37de46..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c +++ /dev/null @@ -1,636 +0,0 @@ -/* - * cpufreq driver for Enhanced SpeedStep, as found in Intel's Pentium - * M (part of the Centrino chipset). - * - * Since the original Pentium M, most new Intel CPUs support Enhanced - * SpeedStep. - * - * Despite the "SpeedStep" in the name, this is almost entirely unlike - * traditional SpeedStep. - * - * Modelled on speedstep.c - * - * Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org> - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/sched.h> /* current */ -#include <linux/delay.h> -#include <linux/compiler.h> -#include <linux/gfp.h> - -#include <asm/msr.h> -#include <asm/processor.h> -#include <asm/cpufeature.h> - -#define PFX "speedstep-centrino: " -#define MAINTAINER "cpufreq@vger.kernel.org" - -#define dprintk(msg...) \ - cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg) - -#define INTEL_MSR_RANGE (0xffff) - -struct cpu_id -{ - __u8 x86; /* CPU family */ - __u8 x86_model; /* model */ - __u8 x86_mask; /* stepping */ -}; - -enum { - CPU_BANIAS, - CPU_DOTHAN_A1, - CPU_DOTHAN_A2, - CPU_DOTHAN_B0, - CPU_MP4HT_D0, - CPU_MP4HT_E0, -}; - -static const struct cpu_id cpu_ids[] = { - [CPU_BANIAS] = { 6, 9, 5 }, - [CPU_DOTHAN_A1] = { 6, 13, 1 }, - [CPU_DOTHAN_A2] = { 6, 13, 2 }, - [CPU_DOTHAN_B0] = { 6, 13, 6 }, - [CPU_MP4HT_D0] = {15, 3, 4 }, - [CPU_MP4HT_E0] = {15, 4, 1 }, -}; -#define N_IDS ARRAY_SIZE(cpu_ids) - -struct cpu_model -{ - const struct cpu_id *cpu_id; - const char *model_name; - unsigned max_freq; /* max clock in kHz */ - - struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */ -}; -static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, - const struct cpu_id *x); - -/* Operating points for current CPU */ -static DEFINE_PER_CPU(struct cpu_model *, centrino_model); -static DEFINE_PER_CPU(const struct cpu_id *, centrino_cpu); - -static struct cpufreq_driver centrino_driver; - -#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE - -/* Computes the correct form for IA32_PERF_CTL MSR for a particular - frequency/voltage operating point; frequency in MHz, volts in mV. - This is stored as "index" in the structure. */ -#define OP(mhz, mv) \ - { \ - .frequency = (mhz) * 1000, \ - .index = (((mhz)/100) << 8) | ((mv - 700) / 16) \ - } - -/* - * These voltage tables were derived from the Intel Pentium M - * datasheet, document 25261202.pdf, Table 5. I have verified they - * are consistent with my IBM ThinkPad X31, which has a 1.3GHz Pentium - * M. - */ - -/* Ultra Low Voltage Intel Pentium M processor 900MHz (Banias) */ -static struct cpufreq_frequency_table banias_900[] = -{ - OP(600, 844), - OP(800, 988), - OP(900, 1004), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Ultra Low Voltage Intel Pentium M processor 1000MHz (Banias) */ -static struct cpufreq_frequency_table banias_1000[] = -{ - OP(600, 844), - OP(800, 972), - OP(900, 988), - OP(1000, 1004), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Low Voltage Intel Pentium M processor 1.10GHz (Banias) */ -static struct cpufreq_frequency_table banias_1100[] = -{ - OP( 600, 956), - OP( 800, 1020), - OP( 900, 1100), - OP(1000, 1164), - OP(1100, 1180), - { .frequency = CPUFREQ_TABLE_END } -}; - - -/* Low Voltage Intel Pentium M processor 1.20GHz (Banias) */ -static struct cpufreq_frequency_table banias_1200[] = -{ - OP( 600, 956), - OP( 800, 1004), - OP( 900, 1020), - OP(1000, 1100), - OP(1100, 1164), - OP(1200, 1180), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Intel Pentium M processor 1.30GHz (Banias) */ -static struct cpufreq_frequency_table banias_1300[] = -{ - OP( 600, 956), - OP( 800, 1260), - OP(1000, 1292), - OP(1200, 1356), - OP(1300, 1388), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Intel Pentium M processor 1.40GHz (Banias) */ -static struct cpufreq_frequency_table banias_1400[] = -{ - OP( 600, 956), - OP( 800, 1180), - OP(1000, 1308), - OP(1200, 1436), - OP(1400, 1484), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Intel Pentium M processor 1.50GHz (Banias) */ -static struct cpufreq_frequency_table banias_1500[] = -{ - OP( 600, 956), - OP( 800, 1116), - OP(1000, 1228), - OP(1200, 1356), - OP(1400, 1452), - OP(1500, 1484), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Intel Pentium M processor 1.60GHz (Banias) */ -static struct cpufreq_frequency_table banias_1600[] = -{ - OP( 600, 956), - OP( 800, 1036), - OP(1000, 1164), - OP(1200, 1276), - OP(1400, 1420), - OP(1600, 1484), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Intel Pentium M processor 1.70GHz (Banias) */ -static struct cpufreq_frequency_table banias_1700[] = -{ - OP( 600, 956), - OP( 800, 1004), - OP(1000, 1116), - OP(1200, 1228), - OP(1400, 1308), - OP(1700, 1484), - { .frequency = CPUFREQ_TABLE_END } -}; -#undef OP - -#define _BANIAS(cpuid, max, name) \ -{ .cpu_id = cpuid, \ - .model_name = "Intel(R) Pentium(R) M processor " name "MHz", \ - .max_freq = (max)*1000, \ - .op_points = banias_##max, \ -} -#define BANIAS(max) _BANIAS(&cpu_ids[CPU_BANIAS], max, #max) - -/* CPU models, their operating frequency range, and freq/voltage - operating points */ -static struct cpu_model models[] = -{ - _BANIAS(&cpu_ids[CPU_BANIAS], 900, " 900"), - BANIAS(1000), - BANIAS(1100), - BANIAS(1200), - BANIAS(1300), - BANIAS(1400), - BANIAS(1500), - BANIAS(1600), - BANIAS(1700), - - /* NULL model_name is a wildcard */ - { &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL }, - { &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL }, - { &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL }, - { &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL }, - { &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL }, - - { NULL, } -}; -#undef _BANIAS -#undef BANIAS - -static int centrino_cpu_init_table(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu); - struct cpu_model *model; - - for(model = models; model->cpu_id != NULL; model++) - if (centrino_verify_cpu_id(cpu, model->cpu_id) && - (model->model_name == NULL || - strcmp(cpu->x86_model_id, model->model_name) == 0)) - break; - - if (model->cpu_id == NULL) { - /* No match at all */ - dprintk("no support for CPU model \"%s\": " - "send /proc/cpuinfo to " MAINTAINER "\n", - cpu->x86_model_id); - return -ENOENT; - } - - if (model->op_points == NULL) { - /* Matched a non-match */ - dprintk("no table support for CPU model \"%s\"\n", - cpu->x86_model_id); - dprintk("try using the acpi-cpufreq driver\n"); - return -ENOENT; - } - - per_cpu(centrino_model, policy->cpu) = model; - - dprintk("found \"%s\": max frequency: %dkHz\n", - model->model_name, model->max_freq); - - return 0; -} - -#else -static inline int centrino_cpu_init_table(struct cpufreq_policy *policy) -{ - return -ENODEV; -} -#endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */ - -static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, - const struct cpu_id *x) -{ - if ((c->x86 == x->x86) && - (c->x86_model == x->x86_model) && - (c->x86_mask == x->x86_mask)) - return 1; - return 0; -} - -/* To be called only after centrino_model is initialized */ -static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe) -{ - int i; - - /* - * Extract clock in kHz from PERF_CTL value - * for centrino, as some DSDTs are buggy. - * Ideally, this can be done using the acpi_data structure. - */ - if ((per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_BANIAS]) || - (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_A1]) || - (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_B0])) { - msr = (msr >> 8) & 0xff; - return msr * 100000; - } - - if ((!per_cpu(centrino_model, cpu)) || - (!per_cpu(centrino_model, cpu)->op_points)) - return 0; - - msr &= 0xffff; - for (i = 0; - per_cpu(centrino_model, cpu)->op_points[i].frequency - != CPUFREQ_TABLE_END; - i++) { - if (msr == per_cpu(centrino_model, cpu)->op_points[i].index) - return per_cpu(centrino_model, cpu)-> - op_points[i].frequency; - } - if (failsafe) - return per_cpu(centrino_model, cpu)->op_points[i-1].frequency; - else - return 0; -} - -/* Return the current CPU frequency in kHz */ -static unsigned int get_cur_freq(unsigned int cpu) -{ - unsigned l, h; - unsigned clock_freq; - - rdmsr_on_cpu(cpu, MSR_IA32_PERF_STATUS, &l, &h); - clock_freq = extract_clock(l, cpu, 0); - - if (unlikely(clock_freq == 0)) { - /* - * On some CPUs, we can see transient MSR values (which are - * not present in _PSS), while CPU is doing some automatic - * P-state transition (like TM2). Get the last freq set - * in PERF_CTL. - */ - rdmsr_on_cpu(cpu, MSR_IA32_PERF_CTL, &l, &h); - clock_freq = extract_clock(l, cpu, 1); - } - return clock_freq; -} - - -static int centrino_cpu_init(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu); - unsigned freq; - unsigned l, h; - int ret; - int i; - - /* Only Intel makes Enhanced Speedstep-capable CPUs */ - if (cpu->x86_vendor != X86_VENDOR_INTEL || - !cpu_has(cpu, X86_FEATURE_EST)) - return -ENODEV; - - if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC)) - centrino_driver.flags |= CPUFREQ_CONST_LOOPS; - - if (policy->cpu != 0) - return -ENODEV; - - for (i = 0; i < N_IDS; i++) - if (centrino_verify_cpu_id(cpu, &cpu_ids[i])) - break; - - if (i != N_IDS) - per_cpu(centrino_cpu, policy->cpu) = &cpu_ids[i]; - - if (!per_cpu(centrino_cpu, policy->cpu)) { - dprintk("found unsupported CPU with " - "Enhanced SpeedStep: send /proc/cpuinfo to " - MAINTAINER "\n"); - return -ENODEV; - } - - if (centrino_cpu_init_table(policy)) { - return -ENODEV; - } - - /* Check to see if Enhanced SpeedStep is enabled, and try to - enable it if not. */ - rdmsr(MSR_IA32_MISC_ENABLE, l, h); - - if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { - l |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP; - dprintk("trying to enable Enhanced SpeedStep (%x)\n", l); - wrmsr(MSR_IA32_MISC_ENABLE, l, h); - - /* check to see if it stuck */ - rdmsr(MSR_IA32_MISC_ENABLE, l, h); - if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { - printk(KERN_INFO PFX - "couldn't enable Enhanced SpeedStep\n"); - return -ENODEV; - } - } - - freq = get_cur_freq(policy->cpu); - policy->cpuinfo.transition_latency = 10000; - /* 10uS transition latency */ - policy->cur = freq; - - dprintk("centrino_cpu_init: cur=%dkHz\n", policy->cur); - - ret = cpufreq_frequency_table_cpuinfo(policy, - per_cpu(centrino_model, policy->cpu)->op_points); - if (ret) - return (ret); - - cpufreq_frequency_table_get_attr( - per_cpu(centrino_model, policy->cpu)->op_points, policy->cpu); - - return 0; -} - -static int centrino_cpu_exit(struct cpufreq_policy *policy) -{ - unsigned int cpu = policy->cpu; - - if (!per_cpu(centrino_model, cpu)) - return -ENODEV; - - cpufreq_frequency_table_put_attr(cpu); - - per_cpu(centrino_model, cpu) = NULL; - - return 0; -} - -/** - * centrino_verify - verifies a new CPUFreq policy - * @policy: new policy - * - * Limit must be within this model's frequency range at least one - * border included. - */ -static int centrino_verify (struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, - per_cpu(centrino_model, policy->cpu)->op_points); -} - -/** - * centrino_setpolicy - set a new CPUFreq policy - * @policy: new policy - * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency - * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) - * - * Sets a new CPUFreq policy. - */ -static int centrino_target (struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - unsigned int msr, oldmsr = 0, h = 0, cpu = policy->cpu; - struct cpufreq_freqs freqs; - int retval = 0; - unsigned int j, k, first_cpu, tmp; - cpumask_var_t covered_cpus; - - if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))) - return -ENOMEM; - - if (unlikely(per_cpu(centrino_model, cpu) == NULL)) { - retval = -ENODEV; - goto out; - } - - if (unlikely(cpufreq_frequency_table_target(policy, - per_cpu(centrino_model, cpu)->op_points, - target_freq, - relation, - &newstate))) { - retval = -EINVAL; - goto out; - } - - first_cpu = 1; - for_each_cpu(j, policy->cpus) { - int good_cpu; - - /* cpufreq holds the hotplug lock, so we are safe here */ - if (!cpu_online(j)) - continue; - - /* - * Support for SMP systems. - * Make sure we are running on CPU that wants to change freq - */ - if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) - good_cpu = cpumask_any_and(policy->cpus, - cpu_online_mask); - else - good_cpu = j; - - if (good_cpu >= nr_cpu_ids) { - dprintk("couldn't limit to CPUs in this domain\n"); - retval = -EAGAIN; - if (first_cpu) { - /* We haven't started the transition yet. */ - goto out; - } - break; - } - - msr = per_cpu(centrino_model, cpu)->op_points[newstate].index; - - if (first_cpu) { - rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h); - if (msr == (oldmsr & 0xffff)) { - dprintk("no change needed - msr was and needs " - "to be %x\n", oldmsr); - retval = 0; - goto out; - } - - freqs.old = extract_clock(oldmsr, cpu, 0); - freqs.new = extract_clock(msr, cpu, 0); - - dprintk("target=%dkHz old=%d new=%d msr=%04x\n", - target_freq, freqs.old, freqs.new, msr); - - for_each_cpu(k, policy->cpus) { - if (!cpu_online(k)) - continue; - freqs.cpu = k; - cpufreq_notify_transition(&freqs, - CPUFREQ_PRECHANGE); - } - - first_cpu = 0; - /* all but 16 LSB are reserved, treat them with care */ - oldmsr &= ~0xffff; - msr &= 0xffff; - oldmsr |= msr; - } - - wrmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, oldmsr, h); - if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) - break; - - cpumask_set_cpu(j, covered_cpus); - } - - for_each_cpu(k, policy->cpus) { - if (!cpu_online(k)) - continue; - freqs.cpu = k; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - - if (unlikely(retval)) { - /* - * We have failed halfway through the frequency change. - * We have sent callbacks to policy->cpus and - * MSRs have already been written on coverd_cpus. - * Best effort undo.. - */ - - for_each_cpu(j, covered_cpus) - wrmsr_on_cpu(j, MSR_IA32_PERF_CTL, oldmsr, h); - - tmp = freqs.new; - freqs.new = freqs.old; - freqs.old = tmp; - for_each_cpu(j, policy->cpus) { - if (!cpu_online(j)) - continue; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - } - retval = 0; - -out: - free_cpumask_var(covered_cpus); - return retval; -} - -static struct freq_attr* centrino_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver centrino_driver = { - .name = "centrino", /* should be speedstep-centrino, - but there's a 16 char limit */ - .init = centrino_cpu_init, - .exit = centrino_cpu_exit, - .verify = centrino_verify, - .target = centrino_target, - .get = get_cur_freq, - .attr = centrino_attr, - .owner = THIS_MODULE, -}; - - -/** - * centrino_init - initializes the Enhanced SpeedStep CPUFreq driver - * - * Initializes the Enhanced SpeedStep support. Returns -ENODEV on - * unsupported devices, -ENOENT if there's no voltage table for this - * particular CPU model, -EINVAL on problems during initiatization, - * and zero on success. - * - * This is quite picky. Not only does the CPU have to advertise the - * "est" flag in the cpuid capability flags, we look for a specific - * CPU model and stepping, and we need to have the exact model name in - * our voltage tables. That is, be paranoid about not releasing - * someone's valuable magic smoke. - */ -static int __init centrino_init(void) -{ - struct cpuinfo_x86 *cpu = &cpu_data(0); - - if (!cpu_has(cpu, X86_FEATURE_EST)) - return -ENODEV; - - return cpufreq_register_driver(¢rino_driver); -} - -static void __exit centrino_exit(void) -{ - cpufreq_unregister_driver(¢rino_driver); -} - -MODULE_AUTHOR ("Jeremy Fitzhardinge <jeremy@goop.org>"); -MODULE_DESCRIPTION ("Enhanced SpeedStep driver for Intel Pentium M processors."); -MODULE_LICENSE ("GPL"); - -late_initcall(centrino_init); -module_exit(centrino_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c deleted file mode 100644 index 561758e9518..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c +++ /dev/null @@ -1,452 +0,0 @@ -/* - * (C) 2001 Dave Jones, Arjan van de ven. - * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> - * - * Licensed under the terms of the GNU GPL License version 2. - * Based upon reverse engineered information, and on Intel documentation - * for chipsets ICH2-M and ICH3-M. - * - * Many thanks to Ducrot Bruno for finding and fixing the last - * "missing link" for ICH2-M/ICH3-M support, and to Thomas Winkler - * for extensive testing. - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - - -/********************************************************************* - * SPEEDSTEP - DEFINITIONS * - *********************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/pci.h> -#include <linux/sched.h> - -#include "speedstep-lib.h" - - -/* speedstep_chipset: - * It is necessary to know which chipset is used. As accesses to - * this device occur at various places in this module, we need a - * static struct pci_dev * pointing to that device. - */ -static struct pci_dev *speedstep_chipset_dev; - - -/* speedstep_processor - */ -static enum speedstep_processor speedstep_processor; - -static u32 pmbase; - -/* - * There are only two frequency states for each processor. Values - * are in kHz for the time being. - */ -static struct cpufreq_frequency_table speedstep_freqs[] = { - {SPEEDSTEP_HIGH, 0}, - {SPEEDSTEP_LOW, 0}, - {0, CPUFREQ_TABLE_END}, -}; - - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "speedstep-ich", msg) - - -/** - * speedstep_find_register - read the PMBASE address - * - * Returns: -ENODEV if no register could be found - */ -static int speedstep_find_register(void) -{ - if (!speedstep_chipset_dev) - return -ENODEV; - - /* get PMBASE */ - pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase); - if (!(pmbase & 0x01)) { - printk(KERN_ERR "speedstep-ich: could not find speedstep register\n"); - return -ENODEV; - } - - pmbase &= 0xFFFFFFFE; - if (!pmbase) { - printk(KERN_ERR "speedstep-ich: could not find speedstep register\n"); - return -ENODEV; - } - - dprintk("pmbase is 0x%x\n", pmbase); - return 0; -} - -/** - * speedstep_set_state - set the SpeedStep state - * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) - * - * Tries to change the SpeedStep state. Can be called from - * smp_call_function_single. - */ -static void speedstep_set_state(unsigned int state) -{ - u8 pm2_blk; - u8 value; - unsigned long flags; - - if (state > 0x1) - return; - - /* Disable IRQs */ - local_irq_save(flags); - - /* read state */ - value = inb(pmbase + 0x50); - - dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); - - /* write new state */ - value &= 0xFE; - value |= state; - - dprintk("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase); - - /* Disable bus master arbitration */ - pm2_blk = inb(pmbase + 0x20); - pm2_blk |= 0x01; - outb(pm2_blk, (pmbase + 0x20)); - - /* Actual transition */ - outb(value, (pmbase + 0x50)); - - /* Restore bus master arbitration */ - pm2_blk &= 0xfe; - outb(pm2_blk, (pmbase + 0x20)); - - /* check if transition was successful */ - value = inb(pmbase + 0x50); - - /* Enable IRQs */ - local_irq_restore(flags); - - dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); - - if (state == (value & 0x1)) - dprintk("change to %u MHz succeeded\n", - speedstep_get_frequency(speedstep_processor) / 1000); - else - printk(KERN_ERR "cpufreq: change failed - I/O error\n"); - - return; -} - -/* Wrapper for smp_call_function_single. */ -static void _speedstep_set_state(void *_state) -{ - speedstep_set_state(*(unsigned int *)_state); -} - -/** - * speedstep_activate - activate SpeedStep control in the chipset - * - * Tries to activate the SpeedStep status and control registers. - * Returns -EINVAL on an unsupported chipset, and zero on success. - */ -static int speedstep_activate(void) -{ - u16 value = 0; - - if (!speedstep_chipset_dev) - return -EINVAL; - - pci_read_config_word(speedstep_chipset_dev, 0x00A0, &value); - if (!(value & 0x08)) { - value |= 0x08; - dprintk("activating SpeedStep (TM) registers\n"); - pci_write_config_word(speedstep_chipset_dev, 0x00A0, value); - } - - return 0; -} - - -/** - * speedstep_detect_chipset - detect the Southbridge which contains SpeedStep logic - * - * Detects ICH2-M, ICH3-M and ICH4-M so far. The pci_dev points to - * the LPC bridge / PM module which contains all power-management - * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected - * chipset, or zero on failure. - */ -static unsigned int speedstep_detect_chipset(void) -{ - speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82801DB_12, - PCI_ANY_ID, PCI_ANY_ID, - NULL); - if (speedstep_chipset_dev) - return 4; /* 4-M */ - - speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82801CA_12, - PCI_ANY_ID, PCI_ANY_ID, - NULL); - if (speedstep_chipset_dev) - return 3; /* 3-M */ - - - speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82801BA_10, - PCI_ANY_ID, PCI_ANY_ID, - NULL); - if (speedstep_chipset_dev) { - /* speedstep.c causes lockups on Dell Inspirons 8000 and - * 8100 which use a pretty old revision of the 82815 - * host brige. Abort on these systems. - */ - static struct pci_dev *hostbridge; - - hostbridge = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82815_MC, - PCI_ANY_ID, PCI_ANY_ID, - NULL); - - if (!hostbridge) - return 2; /* 2-M */ - - if (hostbridge->revision < 5) { - dprintk("hostbridge does not support speedstep\n"); - speedstep_chipset_dev = NULL; - pci_dev_put(hostbridge); - return 0; - } - - pci_dev_put(hostbridge); - return 2; /* 2-M */ - } - - return 0; -} - -static void get_freq_data(void *_speed) -{ - unsigned int *speed = _speed; - - *speed = speedstep_get_frequency(speedstep_processor); -} - -static unsigned int speedstep_get(unsigned int cpu) -{ - unsigned int speed; - - /* You're supposed to ensure CPU is online. */ - if (smp_call_function_single(cpu, get_freq_data, &speed, 1) != 0) - BUG(); - - dprintk("detected %u kHz as current frequency\n", speed); - return speed; -} - -/** - * speedstep_target - set a new CPUFreq policy - * @policy: new policy - * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency - * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) - * - * Sets a new CPUFreq policy. - */ -static int speedstep_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0, policy_cpu; - struct cpufreq_freqs freqs; - int i; - - if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], - target_freq, relation, &newstate)) - return -EINVAL; - - policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask); - freqs.old = speedstep_get(policy_cpu); - freqs.new = speedstep_freqs[newstate].frequency; - freqs.cpu = policy->cpu; - - dprintk("transiting from %u to %u kHz\n", freqs.old, freqs.new); - - /* no transition necessary */ - if (freqs.old == freqs.new) - return 0; - - for_each_cpu(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - } - - smp_call_function_single(policy_cpu, _speedstep_set_state, &newstate, - true); - - for_each_cpu(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - - return 0; -} - - -/** - * speedstep_verify - verifies a new CPUFreq policy - * @policy: new policy - * - * Limit must be within speedstep_low_freq and speedstep_high_freq, with - * at least one border included. - */ -static int speedstep_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]); -} - -struct get_freqs { - struct cpufreq_policy *policy; - int ret; -}; - -static void get_freqs_on_cpu(void *_get_freqs) -{ - struct get_freqs *get_freqs = _get_freqs; - - get_freqs->ret = - speedstep_get_freqs(speedstep_processor, - &speedstep_freqs[SPEEDSTEP_LOW].frequency, - &speedstep_freqs[SPEEDSTEP_HIGH].frequency, - &get_freqs->policy->cpuinfo.transition_latency, - &speedstep_set_state); -} - -static int speedstep_cpu_init(struct cpufreq_policy *policy) -{ - int result; - unsigned int policy_cpu, speed; - struct get_freqs gf; - - /* only run on CPU to be set, or on its sibling */ -#ifdef CONFIG_SMP - cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu)); -#endif - policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask); - - /* detect low and high frequency and transition latency */ - gf.policy = policy; - smp_call_function_single(policy_cpu, get_freqs_on_cpu, &gf, 1); - if (gf.ret) - return gf.ret; - - /* get current speed setting */ - speed = speedstep_get(policy_cpu); - if (!speed) - return -EIO; - - dprintk("currently at %s speed setting - %i MHz\n", - (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) - ? "low" : "high", - (speed / 1000)); - - /* cpuinfo and default policy values */ - policy->cur = speed; - - result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs); - if (result) - return result; - - cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); - - return 0; -} - - -static int speedstep_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static struct freq_attr *speedstep_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - - -static struct cpufreq_driver speedstep_driver = { - .name = "speedstep-ich", - .verify = speedstep_verify, - .target = speedstep_target, - .init = speedstep_cpu_init, - .exit = speedstep_cpu_exit, - .get = speedstep_get, - .owner = THIS_MODULE, - .attr = speedstep_attr, -}; - - -/** - * speedstep_init - initializes the SpeedStep CPUFreq driver - * - * Initializes the SpeedStep support. Returns -ENODEV on unsupported - * devices, -EINVAL on problems during initiatization, and zero on - * success. - */ -static int __init speedstep_init(void) -{ - /* detect processor */ - speedstep_processor = speedstep_detect_processor(); - if (!speedstep_processor) { - dprintk("Intel(R) SpeedStep(TM) capable processor " - "not found\n"); - return -ENODEV; - } - - /* detect chipset */ - if (!speedstep_detect_chipset()) { - dprintk("Intel(R) SpeedStep(TM) for this chipset not " - "(yet) available.\n"); - return -ENODEV; - } - - /* activate speedstep support */ - if (speedstep_activate()) { - pci_dev_put(speedstep_chipset_dev); - return -EINVAL; - } - - if (speedstep_find_register()) - return -ENODEV; - - return cpufreq_register_driver(&speedstep_driver); -} - - -/** - * speedstep_exit - unregisters SpeedStep support - * - * Unregisters SpeedStep support. - */ -static void __exit speedstep_exit(void) -{ - pci_dev_put(speedstep_chipset_dev); - cpufreq_unregister_driver(&speedstep_driver); -} - - -MODULE_AUTHOR("Dave Jones <davej@redhat.com>, " - "Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION("Speedstep driver for Intel mobile processors on chipsets " - "with ICH-M southbridges."); -MODULE_LICENSE("GPL"); - -module_init(speedstep_init); -module_exit(speedstep_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c deleted file mode 100644 index a94ec6be69f..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c +++ /dev/null @@ -1,481 +0,0 @@ -/* - * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> - * - * Licensed under the terms of the GNU GPL License version 2. - * - * Library for common functions for Intel SpeedStep v.1 and v.2 support - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/cpufreq.h> - -#include <asm/msr.h> -#include <asm/tsc.h> -#include "speedstep-lib.h" - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "speedstep-lib", msg) - -#define PFX "speedstep-lib: " - -#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK -static int relaxed_check; -#else -#define relaxed_check 0 -#endif - -/********************************************************************* - * GET PROCESSOR CORE SPEED IN KHZ * - *********************************************************************/ - -static unsigned int pentium3_get_frequency(enum speedstep_processor processor) -{ - /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */ - struct { - unsigned int ratio; /* Frequency Multiplier (x10) */ - u8 bitmap; /* power on configuration bits - [27, 25:22] (in MSR 0x2a) */ - } msr_decode_mult[] = { - { 30, 0x01 }, - { 35, 0x05 }, - { 40, 0x02 }, - { 45, 0x06 }, - { 50, 0x00 }, - { 55, 0x04 }, - { 60, 0x0b }, - { 65, 0x0f }, - { 70, 0x09 }, - { 75, 0x0d }, - { 80, 0x0a }, - { 85, 0x26 }, - { 90, 0x20 }, - { 100, 0x2b }, - { 0, 0xff } /* error or unknown value */ - }; - - /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */ - struct { - unsigned int value; /* Front Side Bus speed in MHz */ - u8 bitmap; /* power on configuration bits [18: 19] - (in MSR 0x2a) */ - } msr_decode_fsb[] = { - { 66, 0x0 }, - { 100, 0x2 }, - { 133, 0x1 }, - { 0, 0xff} - }; - - u32 msr_lo, msr_tmp; - int i = 0, j = 0; - - /* read MSR 0x2a - we only need the low 32 bits */ - rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); - dprintk("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); - msr_tmp = msr_lo; - - /* decode the FSB */ - msr_tmp &= 0x00c0000; - msr_tmp >>= 18; - while (msr_tmp != msr_decode_fsb[i].bitmap) { - if (msr_decode_fsb[i].bitmap == 0xff) - return 0; - i++; - } - - /* decode the multiplier */ - if (processor == SPEEDSTEP_CPU_PIII_C_EARLY) { - dprintk("workaround for early PIIIs\n"); - msr_lo &= 0x03c00000; - } else - msr_lo &= 0x0bc00000; - msr_lo >>= 22; - while (msr_lo != msr_decode_mult[j].bitmap) { - if (msr_decode_mult[j].bitmap == 0xff) - return 0; - j++; - } - - dprintk("speed is %u\n", - (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100)); - - return msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100; -} - - -static unsigned int pentiumM_get_frequency(void) -{ - u32 msr_lo, msr_tmp; - - rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); - dprintk("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); - - /* see table B-2 of 24547212.pdf */ - if (msr_lo & 0x00040000) { - printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n", - msr_lo, msr_tmp); - return 0; - } - - msr_tmp = (msr_lo >> 22) & 0x1f; - dprintk("bits 22-26 are 0x%x, speed is %u\n", - msr_tmp, (msr_tmp * 100 * 1000)); - - return msr_tmp * 100 * 1000; -} - -static unsigned int pentium_core_get_frequency(void) -{ - u32 fsb = 0; - u32 msr_lo, msr_tmp; - int ret; - - rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp); - /* see table B-2 of 25366920.pdf */ - switch (msr_lo & 0x07) { - case 5: - fsb = 100000; - break; - case 1: - fsb = 133333; - break; - case 3: - fsb = 166667; - break; - case 2: - fsb = 200000; - break; - case 0: - fsb = 266667; - break; - case 4: - fsb = 333333; - break; - default: - printk(KERN_ERR "PCORE - MSR_FSB_FREQ undefined value"); - } - - rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); - dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", - msr_lo, msr_tmp); - - msr_tmp = (msr_lo >> 22) & 0x1f; - dprintk("bits 22-26 are 0x%x, speed is %u\n", - msr_tmp, (msr_tmp * fsb)); - - ret = (msr_tmp * fsb); - return ret; -} - - -static unsigned int pentium4_get_frequency(void) -{ - struct cpuinfo_x86 *c = &boot_cpu_data; - u32 msr_lo, msr_hi, mult; - unsigned int fsb = 0; - unsigned int ret; - u8 fsb_code; - - /* Pentium 4 Model 0 and 1 do not have the Core Clock Frequency - * to System Bus Frequency Ratio Field in the Processor Frequency - * Configuration Register of the MSR. Therefore the current - * frequency cannot be calculated and has to be measured. - */ - if (c->x86_model < 2) - return cpu_khz; - - rdmsr(0x2c, msr_lo, msr_hi); - - dprintk("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi); - - /* decode the FSB: see IA-32 Intel (C) Architecture Software - * Developer's Manual, Volume 3: System Prgramming Guide, - * revision #12 in Table B-1: MSRs in the Pentium 4 and - * Intel Xeon Processors, on page B-4 and B-5. - */ - fsb_code = (msr_lo >> 16) & 0x7; - switch (fsb_code) { - case 0: - fsb = 100 * 1000; - break; - case 1: - fsb = 13333 * 10; - break; - case 2: - fsb = 200 * 1000; - break; - } - - if (!fsb) - printk(KERN_DEBUG PFX "couldn't detect FSB speed. " - "Please send an e-mail to <linux@brodo.de>\n"); - - /* Multiplier. */ - mult = msr_lo >> 24; - - dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", - fsb, mult, (fsb * mult)); - - ret = (fsb * mult); - return ret; -} - - -/* Warning: may get called from smp_call_function_single. */ -unsigned int speedstep_get_frequency(enum speedstep_processor processor) -{ - switch (processor) { - case SPEEDSTEP_CPU_PCORE: - return pentium_core_get_frequency(); - case SPEEDSTEP_CPU_PM: - return pentiumM_get_frequency(); - case SPEEDSTEP_CPU_P4D: - case SPEEDSTEP_CPU_P4M: - return pentium4_get_frequency(); - case SPEEDSTEP_CPU_PIII_T: - case SPEEDSTEP_CPU_PIII_C: - case SPEEDSTEP_CPU_PIII_C_EARLY: - return pentium3_get_frequency(processor); - default: - return 0; - }; - return 0; -} -EXPORT_SYMBOL_GPL(speedstep_get_frequency); - - -/********************************************************************* - * DETECT SPEEDSTEP-CAPABLE PROCESSOR * - *********************************************************************/ - -unsigned int speedstep_detect_processor(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - u32 ebx, msr_lo, msr_hi; - - dprintk("x86: %x, model: %x\n", c->x86, c->x86_model); - - if ((c->x86_vendor != X86_VENDOR_INTEL) || - ((c->x86 != 6) && (c->x86 != 0xF))) - return 0; - - if (c->x86 == 0xF) { - /* Intel Mobile Pentium 4-M - * or Intel Mobile Pentium 4 with 533 MHz FSB */ - if (c->x86_model != 2) - return 0; - - ebx = cpuid_ebx(0x00000001); - ebx &= 0x000000FF; - - dprintk("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask); - - switch (c->x86_mask) { - case 4: - /* - * B-stepping [M-P4-M] - * sample has ebx = 0x0f, production has 0x0e. - */ - if ((ebx == 0x0e) || (ebx == 0x0f)) - return SPEEDSTEP_CPU_P4M; - break; - case 7: - /* - * C-stepping [M-P4-M] - * needs to have ebx=0x0e, else it's a celeron: - * cf. 25130917.pdf / page 7, footnote 5 even - * though 25072120.pdf / page 7 doesn't say - * samples are only of B-stepping... - */ - if (ebx == 0x0e) - return SPEEDSTEP_CPU_P4M; - break; - case 9: - /* - * D-stepping [M-P4-M or M-P4/533] - * - * this is totally strange: CPUID 0x0F29 is - * used by M-P4-M, M-P4/533 and(!) Celeron CPUs. - * The latter need to be sorted out as they don't - * support speedstep. - * Celerons with CPUID 0x0F29 may have either - * ebx=0x8 or 0xf -- 25130917.pdf doesn't say anything - * specific. - * M-P4-Ms may have either ebx=0xe or 0xf [see above] - * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf] - * also, M-P4M HTs have ebx=0x8, too - * For now, they are distinguished by the model_id - * string - */ - if ((ebx == 0x0e) || - (strstr(c->x86_model_id, - "Mobile Intel(R) Pentium(R) 4") != NULL)) - return SPEEDSTEP_CPU_P4M; - break; - default: - break; - } - return 0; - } - - switch (c->x86_model) { - case 0x0B: /* Intel PIII [Tualatin] */ - /* cpuid_ebx(1) is 0x04 for desktop PIII, - * 0x06 for mobile PIII-M */ - ebx = cpuid_ebx(0x00000001); - dprintk("ebx is %x\n", ebx); - - ebx &= 0x000000FF; - - if (ebx != 0x06) - return 0; - - /* So far all PIII-M processors support SpeedStep. See - * Intel's 24540640.pdf of June 2003 - */ - return SPEEDSTEP_CPU_PIII_T; - - case 0x08: /* Intel PIII [Coppermine] */ - - /* all mobile PIII Coppermines have FSB 100 MHz - * ==> sort out a few desktop PIIIs. */ - rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi); - dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", - msr_lo, msr_hi); - msr_lo &= 0x00c0000; - if (msr_lo != 0x0080000) - return 0; - - /* - * If the processor is a mobile version, - * platform ID has bit 50 set - * it has SpeedStep technology if either - * bit 56 or 57 is set - */ - rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi); - dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", - msr_lo, msr_hi); - if ((msr_hi & (1<<18)) && - (relaxed_check ? 1 : (msr_hi & (3<<24)))) { - if (c->x86_mask == 0x01) { - dprintk("early PIII version\n"); - return SPEEDSTEP_CPU_PIII_C_EARLY; - } else - return SPEEDSTEP_CPU_PIII_C; - } - - default: - return 0; - } -} -EXPORT_SYMBOL_GPL(speedstep_detect_processor); - - -/********************************************************************* - * DETECT SPEEDSTEP SPEEDS * - *********************************************************************/ - -unsigned int speedstep_get_freqs(enum speedstep_processor processor, - unsigned int *low_speed, - unsigned int *high_speed, - unsigned int *transition_latency, - void (*set_state) (unsigned int state)) -{ - unsigned int prev_speed; - unsigned int ret = 0; - unsigned long flags; - struct timeval tv1, tv2; - - if ((!processor) || (!low_speed) || (!high_speed) || (!set_state)) - return -EINVAL; - - dprintk("trying to determine both speeds\n"); - - /* get current speed */ - prev_speed = speedstep_get_frequency(processor); - if (!prev_speed) - return -EIO; - - dprintk("previous speed is %u\n", prev_speed); - - local_irq_save(flags); - - /* switch to low state */ - set_state(SPEEDSTEP_LOW); - *low_speed = speedstep_get_frequency(processor); - if (!*low_speed) { - ret = -EIO; - goto out; - } - - dprintk("low speed is %u\n", *low_speed); - - /* start latency measurement */ - if (transition_latency) - do_gettimeofday(&tv1); - - /* switch to high state */ - set_state(SPEEDSTEP_HIGH); - - /* end latency measurement */ - if (transition_latency) - do_gettimeofday(&tv2); - - *high_speed = speedstep_get_frequency(processor); - if (!*high_speed) { - ret = -EIO; - goto out; - } - - dprintk("high speed is %u\n", *high_speed); - - if (*low_speed == *high_speed) { - ret = -ENODEV; - goto out; - } - - /* switch to previous state, if necessary */ - if (*high_speed != prev_speed) - set_state(SPEEDSTEP_LOW); - - if (transition_latency) { - *transition_latency = (tv2.tv_sec - tv1.tv_sec) * USEC_PER_SEC + - tv2.tv_usec - tv1.tv_usec; - dprintk("transition latency is %u uSec\n", *transition_latency); - - /* convert uSec to nSec and add 20% for safety reasons */ - *transition_latency *= 1200; - - /* check if the latency measurement is too high or too low - * and set it to a safe value (500uSec) in that case - */ - if (*transition_latency > 10000000 || - *transition_latency < 50000) { - printk(KERN_WARNING PFX "frequency transition " - "measured seems out of range (%u " - "nSec), falling back to a safe one of" - "%u nSec.\n", - *transition_latency, 500000); - *transition_latency = 500000; - } - } - -out: - local_irq_restore(flags); - return ret; -} -EXPORT_SYMBOL_GPL(speedstep_get_freqs); - -#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK -module_param(relaxed_check, int, 0444); -MODULE_PARM_DESC(relaxed_check, - "Don't do all checks for speedstep capability."); -#endif - -MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION("Library for Intel SpeedStep 1 or 2 cpufreq drivers."); -MODULE_LICENSE("GPL"); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h deleted file mode 100644 index 70d9cea1219..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> - * - * Licensed under the terms of the GNU GPL License version 2. - * - * Library for common functions for Intel SpeedStep v.1 and v.2 support - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - - - -/* processors */ -enum speedstep_processor { - SPEEDSTEP_CPU_PIII_C_EARLY = 0x00000001, /* Coppermine core */ - SPEEDSTEP_CPU_PIII_C = 0x00000002, /* Coppermine core */ - SPEEDSTEP_CPU_PIII_T = 0x00000003, /* Tualatin core */ - SPEEDSTEP_CPU_P4M = 0x00000004, /* P4-M */ -/* the following processors are not speedstep-capable and are not auto-detected - * in speedstep_detect_processor(). However, their speed can be detected using - * the speedstep_get_frequency() call. */ - SPEEDSTEP_CPU_PM = 0xFFFFFF03, /* Pentium M */ - SPEEDSTEP_CPU_P4D = 0xFFFFFF04, /* desktop P4 */ - SPEEDSTEP_CPU_PCORE = 0xFFFFFF05, /* Core */ -}; - -/* speedstep states -- only two of them */ - -#define SPEEDSTEP_HIGH 0x00000000 -#define SPEEDSTEP_LOW 0x00000001 - - -/* detect a speedstep-capable processor */ -extern enum speedstep_processor speedstep_detect_processor(void); - -/* detect the current speed (in khz) of the processor */ -extern unsigned int speedstep_get_frequency(enum speedstep_processor processor); - - -/* detect the low and high speeds of the processor. The callback - * set_state"'s first argument is either SPEEDSTEP_HIGH or - * SPEEDSTEP_LOW; the second argument is zero so that no - * cpufreq_notify_transition calls are initiated. - */ -extern unsigned int speedstep_get_freqs(enum speedstep_processor processor, - unsigned int *low_speed, - unsigned int *high_speed, - unsigned int *transition_latency, - void (*set_state) (unsigned int state)); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c deleted file mode 100644 index 91bc25b67bc..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c +++ /dev/null @@ -1,467 +0,0 @@ -/* - * Intel SpeedStep SMI driver. - * - * (C) 2003 Hiroshi Miura <miura@da-cha.org> - * - * Licensed under the terms of the GNU GPL License version 2. - * - */ - - -/********************************************************************* - * SPEEDSTEP - DEFINITIONS * - *********************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <asm/ist.h> - -#include "speedstep-lib.h" - -/* speedstep system management interface port/command. - * - * These parameters are got from IST-SMI BIOS call. - * If user gives it, these are used. - * - */ -static int smi_port; -static int smi_cmd; -static unsigned int smi_sig; - -/* info about the processor */ -static enum speedstep_processor speedstep_processor; - -/* - * There are only two frequency states for each processor. Values - * are in kHz for the time being. - */ -static struct cpufreq_frequency_table speedstep_freqs[] = { - {SPEEDSTEP_HIGH, 0}, - {SPEEDSTEP_LOW, 0}, - {0, CPUFREQ_TABLE_END}, -}; - -#define GET_SPEEDSTEP_OWNER 0 -#define GET_SPEEDSTEP_STATE 1 -#define SET_SPEEDSTEP_STATE 2 -#define GET_SPEEDSTEP_FREQS 4 - -/* how often shall the SMI call be tried if it failed, e.g. because - * of DMA activity going on? */ -#define SMI_TRIES 5 - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "speedstep-smi", msg) - -/** - * speedstep_smi_ownership - */ -static int speedstep_smi_ownership(void) -{ - u32 command, result, magic, dummy; - u32 function = GET_SPEEDSTEP_OWNER; - unsigned char magic_data[] = "Copyright (c) 1999 Intel Corporation"; - - command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - magic = virt_to_phys(magic_data); - - dprintk("trying to obtain ownership with command %x at port %x\n", - command, smi_port); - - __asm__ __volatile__( - "push %%ebp\n" - "out %%al, (%%dx)\n" - "pop %%ebp\n" - : "=D" (result), - "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy), - "=S" (dummy) - : "a" (command), "b" (function), "c" (0), "d" (smi_port), - "D" (0), "S" (magic) - : "memory" - ); - - dprintk("result is %x\n", result); - - return result; -} - -/** - * speedstep_smi_get_freqs - get SpeedStep preferred & current freq. - * @low: the low frequency value is placed here - * @high: the high frequency value is placed here - * - * Only available on later SpeedStep-enabled systems, returns false results or - * even hangs [cf. bugme.osdl.org # 1422] on earlier systems. Empirical testing - * shows that the latter occurs if !(ist_info.event & 0xFFFF). - */ -static int speedstep_smi_get_freqs(unsigned int *low, unsigned int *high) -{ - u32 command, result = 0, edi, high_mhz, low_mhz, dummy; - u32 state = 0; - u32 function = GET_SPEEDSTEP_FREQS; - - if (!(ist_info.event & 0xFFFF)) { - dprintk("bug #1422 -- can't read freqs from BIOS\n"); - return -ENODEV; - } - - command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - - dprintk("trying to determine frequencies with command %x at port %x\n", - command, smi_port); - - __asm__ __volatile__( - "push %%ebp\n" - "out %%al, (%%dx)\n" - "pop %%ebp" - : "=a" (result), - "=b" (high_mhz), - "=c" (low_mhz), - "=d" (state), "=D" (edi), "=S" (dummy) - : "a" (command), - "b" (function), - "c" (state), - "d" (smi_port), "S" (0), "D" (0) - ); - - dprintk("result %x, low_freq %u, high_freq %u\n", - result, low_mhz, high_mhz); - - /* abort if results are obviously incorrect... */ - if ((high_mhz + low_mhz) < 600) - return -EINVAL; - - *high = high_mhz * 1000; - *low = low_mhz * 1000; - - return result; -} - -/** - * speedstep_get_state - set the SpeedStep state - * @state: processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) - * - */ -static int speedstep_get_state(void) -{ - u32 function = GET_SPEEDSTEP_STATE; - u32 result, state, edi, command, dummy; - - command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - - dprintk("trying to determine current setting with command %x " - "at port %x\n", command, smi_port); - - __asm__ __volatile__( - "push %%ebp\n" - "out %%al, (%%dx)\n" - "pop %%ebp\n" - : "=a" (result), - "=b" (state), "=D" (edi), - "=c" (dummy), "=d" (dummy), "=S" (dummy) - : "a" (command), "b" (function), "c" (0), - "d" (smi_port), "S" (0), "D" (0) - ); - - dprintk("state is %x, result is %x\n", state, result); - - return state & 1; -} - - -/** - * speedstep_set_state - set the SpeedStep state - * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) - * - */ -static void speedstep_set_state(unsigned int state) -{ - unsigned int result = 0, command, new_state, dummy; - unsigned long flags; - unsigned int function = SET_SPEEDSTEP_STATE; - unsigned int retry = 0; - - if (state > 0x1) - return; - - /* Disable IRQs */ - local_irq_save(flags); - - command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - - dprintk("trying to set frequency to state %u " - "with command %x at port %x\n", - state, command, smi_port); - - do { - if (retry) { - dprintk("retry %u, previous result %u, waiting...\n", - retry, result); - mdelay(retry * 50); - } - retry++; - __asm__ __volatile__( - "push %%ebp\n" - "out %%al, (%%dx)\n" - "pop %%ebp" - : "=b" (new_state), "=D" (result), - "=c" (dummy), "=a" (dummy), - "=d" (dummy), "=S" (dummy) - : "a" (command), "b" (function), "c" (state), - "d" (smi_port), "S" (0), "D" (0) - ); - } while ((new_state != state) && (retry <= SMI_TRIES)); - - /* enable IRQs */ - local_irq_restore(flags); - - if (new_state == state) - dprintk("change to %u MHz succeeded after %u tries " - "with result %u\n", - (speedstep_freqs[new_state].frequency / 1000), - retry, result); - else - printk(KERN_ERR "cpufreq: change to state %u " - "failed with new_state %u and result %u\n", - state, new_state, result); - - return; -} - - -/** - * speedstep_target - set a new CPUFreq policy - * @policy: new policy - * @target_freq: new freq - * @relation: - * - * Sets a new CPUFreq policy/freq. - */ -static int speedstep_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned int newstate = 0; - struct cpufreq_freqs freqs; - - if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], - target_freq, relation, &newstate)) - return -EINVAL; - - freqs.old = speedstep_freqs[speedstep_get_state()].frequency; - freqs.new = speedstep_freqs[newstate].frequency; - freqs.cpu = 0; /* speedstep.c is UP only driver */ - - if (freqs.old == freqs.new) - return 0; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - speedstep_set_state(newstate); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - - -/** - * speedstep_verify - verifies a new CPUFreq policy - * @policy: new policy - * - * Limit must be within speedstep_low_freq and speedstep_high_freq, with - * at least one border included. - */ -static int speedstep_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]); -} - - -static int speedstep_cpu_init(struct cpufreq_policy *policy) -{ - int result; - unsigned int speed, state; - unsigned int *low, *high; - - /* capability check */ - if (policy->cpu != 0) - return -ENODEV; - - result = speedstep_smi_ownership(); - if (result) { - dprintk("fails in acquiring ownership of a SMI interface.\n"); - return -EINVAL; - } - - /* detect low and high frequency */ - low = &speedstep_freqs[SPEEDSTEP_LOW].frequency; - high = &speedstep_freqs[SPEEDSTEP_HIGH].frequency; - - result = speedstep_smi_get_freqs(low, high); - if (result) { - /* fall back to speedstep_lib.c dection mechanism: - * try both states out */ - dprintk("could not detect low and high frequencies " - "by SMI call.\n"); - result = speedstep_get_freqs(speedstep_processor, - low, high, - NULL, - &speedstep_set_state); - - if (result) { - dprintk("could not detect two different speeds" - " -- aborting.\n"); - return result; - } else - dprintk("workaround worked.\n"); - } - - /* get current speed setting */ - state = speedstep_get_state(); - speed = speedstep_freqs[state].frequency; - - dprintk("currently at %s speed setting - %i MHz\n", - (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) - ? "low" : "high", - (speed / 1000)); - - /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - policy->cur = speed; - - result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs); - if (result) - return result; - - cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); - - return 0; -} - -static int speedstep_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static unsigned int speedstep_get(unsigned int cpu) -{ - if (cpu) - return -ENODEV; - return speedstep_get_frequency(speedstep_processor); -} - - -static int speedstep_resume(struct cpufreq_policy *policy) -{ - int result = speedstep_smi_ownership(); - - if (result) - dprintk("fails in re-acquiring ownership of a SMI interface.\n"); - - return result; -} - -static struct freq_attr *speedstep_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver speedstep_driver = { - .name = "speedstep-smi", - .verify = speedstep_verify, - .target = speedstep_target, - .init = speedstep_cpu_init, - .exit = speedstep_cpu_exit, - .get = speedstep_get, - .resume = speedstep_resume, - .owner = THIS_MODULE, - .attr = speedstep_attr, -}; - -/** - * speedstep_init - initializes the SpeedStep CPUFreq driver - * - * Initializes the SpeedStep support. Returns -ENODEV on unsupported - * BIOS, -EINVAL on problems during initiatization, and zero on - * success. - */ -static int __init speedstep_init(void) -{ - speedstep_processor = speedstep_detect_processor(); - - switch (speedstep_processor) { - case SPEEDSTEP_CPU_PIII_T: - case SPEEDSTEP_CPU_PIII_C: - case SPEEDSTEP_CPU_PIII_C_EARLY: - break; - default: - speedstep_processor = 0; - } - - if (!speedstep_processor) { - dprintk("No supported Intel CPU detected.\n"); - return -ENODEV; - } - - dprintk("signature:0x%.8lx, command:0x%.8lx, " - "event:0x%.8lx, perf_level:0x%.8lx.\n", - ist_info.signature, ist_info.command, - ist_info.event, ist_info.perf_level); - - /* Error if no IST-SMI BIOS or no PARM - sig= 'ISGE' aka 'Intel Speedstep Gate E' */ - if ((ist_info.signature != 0x47534943) && ( - (smi_port == 0) || (smi_cmd == 0))) - return -ENODEV; - - if (smi_sig == 1) - smi_sig = 0x47534943; - else - smi_sig = ist_info.signature; - - /* setup smi_port from MODLULE_PARM or BIOS */ - if ((smi_port > 0xff) || (smi_port < 0)) - return -EINVAL; - else if (smi_port == 0) - smi_port = ist_info.command & 0xff; - - if ((smi_cmd > 0xff) || (smi_cmd < 0)) - return -EINVAL; - else if (smi_cmd == 0) - smi_cmd = (ist_info.command >> 16) & 0xff; - - return cpufreq_register_driver(&speedstep_driver); -} - - -/** - * speedstep_exit - unregisters SpeedStep support - * - * Unregisters SpeedStep support. - */ -static void __exit speedstep_exit(void) -{ - cpufreq_unregister_driver(&speedstep_driver); -} - -module_param(smi_port, int, 0444); -module_param(smi_cmd, int, 0444); -module_param(smi_sig, uint, 0444); - -MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value " - "-- Intel's default setting is 0xb2"); -MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value " - "-- Intel's default setting is 0x82"); -MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the " - "SMI interface."); - -MODULE_AUTHOR("Hiroshi Miura"); -MODULE_DESCRIPTION("Speedstep driver for IST applet SMI interface."); -MODULE_LICENSE("GPL"); - -module_init(speedstep_init); -module_exit(speedstep_exit); diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c index 167f97b5596..bb0adad3514 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c @@ -509,6 +509,7 @@ recurse: out_free: if (b) { kobject_put(&b->kobj); + list_del(&b->miscj); kfree(b); } return err; diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index 6f8c5e9da97..0f034460260 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -446,18 +446,20 @@ void intel_init_thermal(struct cpuinfo_x86 *c) */ rdmsr(MSR_IA32_MISC_ENABLE, l, h); + h = lvtthmr_init; /* * The initial value of thermal LVT entries on all APs always reads * 0x10000 because APs are woken up by BSP issuing INIT-SIPI-SIPI * sequence to them and LVT registers are reset to 0s except for * the mask bits which are set to 1s when APs receive INIT IPI. - * Always restore the value that BIOS has programmed on AP based on - * BSP's info we saved since BIOS is always setting the same value - * for all threads/cores + * If BIOS takes over the thermal interrupt and sets its interrupt + * delivery mode to SMI (not fixed), it restores the value that the + * BIOS has programmed on AP based on BSP's info we saved since BIOS + * is always setting the same value for all threads/cores. */ - apic_write(APIC_LVTTHMR, lvtthmr_init); + if ((h & APIC_DM_FIXED_MASK) != APIC_DM_FIXED) + apic_write(APIC_LVTTHMR, lvtthmr_init); - h = lvtthmr_init; if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) { printk(KERN_DEBUG diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index eed3673a865..e638689279d 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -586,8 +586,12 @@ static int x86_setup_perfctr(struct perf_event *event) return -EOPNOTSUPP; } + /* + * Do not allow config1 (extended registers) to propagate, + * there's no sane user-space generalization yet: + */ if (attr->type == PERF_TYPE_RAW) - return x86_pmu_extra_regs(event->attr.config, event); + return 0; if (attr->type == PERF_TYPE_HW_CACHE) return set_ext_hw_attr(hwc, event); @@ -609,8 +613,8 @@ static int x86_setup_perfctr(struct perf_event *event) /* * Branch tracing: */ - if ((attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS) && - (hwc->sample_period == 1)) { + if (attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS && + !attr->freq && hwc->sample_period == 1) { /* BTS is not supported by this architecture. */ if (!x86_pmu.bts_active) return -EOPNOTSUPP; @@ -1284,6 +1288,16 @@ static int x86_pmu_handle_irq(struct pt_regs *regs) cpuc = &__get_cpu_var(cpu_hw_events); + /* + * Some chipsets need to unmask the LVTPC in a particular spot + * inside the nmi handler. As a result, the unmasking was pushed + * into all the nmi handlers. + * + * This generic handler doesn't seem to have any issues where the + * unmasking occurs so it was left at the top. + */ + apic_write(APIC_LVTPC, APIC_DM_NMI); + for (idx = 0; idx < x86_pmu.num_counters; idx++) { if (!test_bit(idx, cpuc->active_mask)) { /* @@ -1370,8 +1384,6 @@ perf_event_nmi_handler(struct notifier_block *self, return NOTIFY_DONE; } - apic_write(APIC_LVTPC, APIC_DM_NMI); - handled = x86_pmu.handle_irq(args->regs); if (!handled) return NOTIFY_DONE; diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c index 461f62bbd77..cf4e369cea6 100644 --- a/arch/x86/kernel/cpu/perf_event_amd.c +++ b/arch/x86/kernel/cpu/perf_event_amd.c @@ -8,7 +8,7 @@ static __initconst const u64 amd_hw_cache_event_ids [ C(L1D) ] = { [ C(OP_READ) ] = { [ C(RESULT_ACCESS) ] = 0x0040, /* Data Cache Accesses */ - [ C(RESULT_MISS) ] = 0x0041, /* Data Cache Misses */ + [ C(RESULT_MISS) ] = 0x0141, /* Data Cache Misses */ }, [ C(OP_WRITE) ] = { [ C(RESULT_ACCESS) ] = 0x0142, /* Data Cache Refills :system */ @@ -427,7 +427,9 @@ static __initconst const struct x86_pmu amd_pmu = { * * Exceptions: * + * 0x000 FP PERF_CTL[3], PERF_CTL[5:3] (*) * 0x003 FP PERF_CTL[3] + * 0x004 FP PERF_CTL[3], PERF_CTL[5:3] (*) * 0x00B FP PERF_CTL[3] * 0x00D FP PERF_CTL[3] * 0x023 DE PERF_CTL[2:0] @@ -448,6 +450,8 @@ static __initconst const struct x86_pmu amd_pmu = { * 0x0DF LS PERF_CTL[5:0] * 0x1D6 EX PERF_CTL[5:0] * 0x1D8 EX PERF_CTL[5:0] + * + * (*) depending on the umask all FPU counters may be used */ static struct event_constraint amd_f15_PMC0 = EVENT_CONSTRAINT(0, 0x01, 0); @@ -460,18 +464,28 @@ static struct event_constraint amd_f15_PMC53 = EVENT_CONSTRAINT(0, 0x38, 0); static struct event_constraint * amd_get_event_constraints_f15h(struct cpu_hw_events *cpuc, struct perf_event *event) { - unsigned int event_code = amd_get_event_code(&event->hw); + struct hw_perf_event *hwc = &event->hw; + unsigned int event_code = amd_get_event_code(hwc); switch (event_code & AMD_EVENT_TYPE_MASK) { case AMD_EVENT_FP: switch (event_code) { + case 0x000: + if (!(hwc->config & 0x0000F000ULL)) + break; + if (!(hwc->config & 0x00000F00ULL)) + break; + return &amd_f15_PMC3; + case 0x004: + if (hweight_long(hwc->config & ARCH_PERFMON_EVENTSEL_UMASK) <= 1) + break; + return &amd_f15_PMC3; case 0x003: case 0x00B: case 0x00D: return &amd_f15_PMC3; - default: - return &amd_f15_PMC53; } + return &amd_f15_PMC53; case AMD_EVENT_LS: case AMD_EVENT_DC: case AMD_EVENT_EX_LS: diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 8fc2b2cee1d..447a28de6f0 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -25,7 +25,7 @@ struct intel_percore { /* * Intel PerfMon, used on Core and later. */ -static const u64 intel_perfmon_event_map[] = +static u64 intel_perfmon_event_map[PERF_COUNT_HW_MAX] __read_mostly = { [PERF_COUNT_HW_CPU_CYCLES] = 0x003c, [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0, @@ -184,26 +184,23 @@ static __initconst const u64 snb_hw_cache_event_ids }, }, [ C(LL ) ] = { - /* - * TBD: Need Off-core Response Performance Monitoring support - */ [ C(OP_READ) ] = { - /* OFFCORE_RESPONSE_0.ANY_DATA.LOCAL_CACHE */ + /* OFFCORE_RESPONSE.ANY_DATA.LOCAL_CACHE */ [ C(RESULT_ACCESS) ] = 0x01b7, - /* OFFCORE_RESPONSE_1.ANY_DATA.ANY_LLC_MISS */ - [ C(RESULT_MISS) ] = 0x01bb, + /* OFFCORE_RESPONSE.ANY_DATA.ANY_LLC_MISS */ + [ C(RESULT_MISS) ] = 0x01b7, }, [ C(OP_WRITE) ] = { - /* OFFCORE_RESPONSE_0.ANY_RFO.LOCAL_CACHE */ + /* OFFCORE_RESPONSE.ANY_RFO.LOCAL_CACHE */ [ C(RESULT_ACCESS) ] = 0x01b7, - /* OFFCORE_RESPONSE_1.ANY_RFO.ANY_LLC_MISS */ - [ C(RESULT_MISS) ] = 0x01bb, + /* OFFCORE_RESPONSE.ANY_RFO.ANY_LLC_MISS */ + [ C(RESULT_MISS) ] = 0x01b7, }, [ C(OP_PREFETCH) ] = { - /* OFFCORE_RESPONSE_0.PREFETCH.LOCAL_CACHE */ + /* OFFCORE_RESPONSE.PREFETCH.LOCAL_CACHE */ [ C(RESULT_ACCESS) ] = 0x01b7, - /* OFFCORE_RESPONSE_1.PREFETCH.ANY_LLC_MISS */ - [ C(RESULT_MISS) ] = 0x01bb, + /* OFFCORE_RESPONSE.PREFETCH.ANY_LLC_MISS */ + [ C(RESULT_MISS) ] = 0x01b7, }, }, [ C(DTLB) ] = { @@ -285,26 +282,26 @@ static __initconst const u64 westmere_hw_cache_event_ids }, [ C(LL ) ] = { [ C(OP_READ) ] = { - /* OFFCORE_RESPONSE_0.ANY_DATA.LOCAL_CACHE */ + /* OFFCORE_RESPONSE.ANY_DATA.LOCAL_CACHE */ [ C(RESULT_ACCESS) ] = 0x01b7, - /* OFFCORE_RESPONSE_1.ANY_DATA.ANY_LLC_MISS */ - [ C(RESULT_MISS) ] = 0x01bb, + /* OFFCORE_RESPONSE.ANY_DATA.ANY_LLC_MISS */ + [ C(RESULT_MISS) ] = 0x01b7, }, /* * Use RFO, not WRITEBACK, because a write miss would typically occur * on RFO. */ [ C(OP_WRITE) ] = { - /* OFFCORE_RESPONSE_1.ANY_RFO.LOCAL_CACHE */ - [ C(RESULT_ACCESS) ] = 0x01bb, - /* OFFCORE_RESPONSE_0.ANY_RFO.ANY_LLC_MISS */ + /* OFFCORE_RESPONSE.ANY_RFO.LOCAL_CACHE */ + [ C(RESULT_ACCESS) ] = 0x01b7, + /* OFFCORE_RESPONSE.ANY_RFO.ANY_LLC_MISS */ [ C(RESULT_MISS) ] = 0x01b7, }, [ C(OP_PREFETCH) ] = { - /* OFFCORE_RESPONSE_0.PREFETCH.LOCAL_CACHE */ + /* OFFCORE_RESPONSE.PREFETCH.LOCAL_CACHE */ [ C(RESULT_ACCESS) ] = 0x01b7, - /* OFFCORE_RESPONSE_1.PREFETCH.ANY_LLC_MISS */ - [ C(RESULT_MISS) ] = 0x01bb, + /* OFFCORE_RESPONSE.PREFETCH.ANY_LLC_MISS */ + [ C(RESULT_MISS) ] = 0x01b7, }, }, [ C(DTLB) ] = { @@ -352,16 +349,36 @@ static __initconst const u64 westmere_hw_cache_event_ids }; /* - * OFFCORE_RESPONSE MSR bits (subset), See IA32 SDM Vol 3 30.6.1.3 + * Nehalem/Westmere MSR_OFFCORE_RESPONSE bits; + * See IA32 SDM Vol 3B 30.6.1.3 */ -#define DMND_DATA_RD (1 << 0) -#define DMND_RFO (1 << 1) -#define DMND_WB (1 << 3) -#define PF_DATA_RD (1 << 4) -#define PF_DATA_RFO (1 << 5) -#define RESP_UNCORE_HIT (1 << 8) -#define RESP_MISS (0xf600) /* non uncore hit */ +#define NHM_DMND_DATA_RD (1 << 0) +#define NHM_DMND_RFO (1 << 1) +#define NHM_DMND_IFETCH (1 << 2) +#define NHM_DMND_WB (1 << 3) +#define NHM_PF_DATA_RD (1 << 4) +#define NHM_PF_DATA_RFO (1 << 5) +#define NHM_PF_IFETCH (1 << 6) +#define NHM_OFFCORE_OTHER (1 << 7) +#define NHM_UNCORE_HIT (1 << 8) +#define NHM_OTHER_CORE_HIT_SNP (1 << 9) +#define NHM_OTHER_CORE_HITM (1 << 10) + /* reserved */ +#define NHM_REMOTE_CACHE_FWD (1 << 12) +#define NHM_REMOTE_DRAM (1 << 13) +#define NHM_LOCAL_DRAM (1 << 14) +#define NHM_NON_DRAM (1 << 15) + +#define NHM_ALL_DRAM (NHM_REMOTE_DRAM|NHM_LOCAL_DRAM) + +#define NHM_DMND_READ (NHM_DMND_DATA_RD) +#define NHM_DMND_WRITE (NHM_DMND_RFO|NHM_DMND_WB) +#define NHM_DMND_PREFETCH (NHM_PF_DATA_RD|NHM_PF_DATA_RFO) + +#define NHM_L3_HIT (NHM_UNCORE_HIT|NHM_OTHER_CORE_HIT_SNP|NHM_OTHER_CORE_HITM) +#define NHM_L3_MISS (NHM_NON_DRAM|NHM_ALL_DRAM|NHM_REMOTE_CACHE_FWD) +#define NHM_L3_ACCESS (NHM_L3_HIT|NHM_L3_MISS) static __initconst const u64 nehalem_hw_cache_extra_regs [PERF_COUNT_HW_CACHE_MAX] @@ -370,16 +387,16 @@ static __initconst const u64 nehalem_hw_cache_extra_regs { [ C(LL ) ] = { [ C(OP_READ) ] = { - [ C(RESULT_ACCESS) ] = DMND_DATA_RD|RESP_UNCORE_HIT, - [ C(RESULT_MISS) ] = DMND_DATA_RD|RESP_MISS, + [ C(RESULT_ACCESS) ] = NHM_DMND_READ|NHM_L3_ACCESS, + [ C(RESULT_MISS) ] = NHM_DMND_READ|NHM_L3_MISS, }, [ C(OP_WRITE) ] = { - [ C(RESULT_ACCESS) ] = DMND_RFO|DMND_WB|RESP_UNCORE_HIT, - [ C(RESULT_MISS) ] = DMND_RFO|DMND_WB|RESP_MISS, + [ C(RESULT_ACCESS) ] = NHM_DMND_WRITE|NHM_L3_ACCESS, + [ C(RESULT_MISS) ] = NHM_DMND_WRITE|NHM_L3_MISS, }, [ C(OP_PREFETCH) ] = { - [ C(RESULT_ACCESS) ] = PF_DATA_RD|PF_DATA_RFO|RESP_UNCORE_HIT, - [ C(RESULT_MISS) ] = PF_DATA_RD|PF_DATA_RFO|RESP_MISS, + [ C(RESULT_ACCESS) ] = NHM_DMND_PREFETCH|NHM_L3_ACCESS, + [ C(RESULT_MISS) ] = NHM_DMND_PREFETCH|NHM_L3_MISS, }, } }; @@ -391,12 +408,12 @@ static __initconst const u64 nehalem_hw_cache_event_ids { [ C(L1D) ] = { [ C(OP_READ) ] = { - [ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI */ - [ C(RESULT_MISS) ] = 0x0140, /* L1D_CACHE_LD.I_STATE */ + [ C(RESULT_ACCESS) ] = 0x010b, /* MEM_INST_RETIRED.LOADS */ + [ C(RESULT_MISS) ] = 0x0151, /* L1D.REPL */ }, [ C(OP_WRITE) ] = { - [ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI */ - [ C(RESULT_MISS) ] = 0x0141, /* L1D_CACHE_ST.I_STATE */ + [ C(RESULT_ACCESS) ] = 0x020b, /* MEM_INST_RETURED.STORES */ + [ C(RESULT_MISS) ] = 0x0251, /* L1D.M_REPL */ }, [ C(OP_PREFETCH) ] = { [ C(RESULT_ACCESS) ] = 0x014e, /* L1D_PREFETCH.REQUESTS */ @@ -933,6 +950,16 @@ static int intel_pmu_handle_irq(struct pt_regs *regs) cpuc = &__get_cpu_var(cpu_hw_events); + /* + * Some chipsets need to unmask the LVTPC in a particular spot + * inside the nmi handler. As a result, the unmasking was pushed + * into all the nmi handlers. + * + * This handler doesn't seem to have any issues with the unmasking + * so it was left at the top. + */ + apic_write(APIC_LVTPC, APIC_DM_NMI); + intel_pmu_disable_all(); handled = intel_pmu_drain_bts_buffer(); status = intel_pmu_get_status(); @@ -998,6 +1025,9 @@ intel_bts_constraints(struct perf_event *event) struct hw_perf_event *hwc = &event->hw; unsigned int hw_event, bts_event; + if (event->attr.freq) + return NULL; + hw_event = hwc->config & INTEL_ARCH_EVENT_MASK; bts_event = x86_pmu.event_map(PERF_COUNT_HW_BRANCH_INSTRUCTIONS); @@ -1305,7 +1335,7 @@ static void intel_clovertown_quirks(void) * AJ106 could possibly be worked around by not allowing LBR * usage from PEBS, including the fixup. * AJ68 could possibly be worked around by always programming - * a pebs_event_reset[0] value and coping with the lost events. + * a pebs_event_reset[0] value and coping with the lost events. * * But taken together it might just make sense to not enable PEBS on * these chips. @@ -1409,6 +1439,18 @@ static __init int intel_pmu_init(void) x86_pmu.percore_constraints = intel_nehalem_percore_constraints; x86_pmu.enable_all = intel_pmu_nhm_enable_all; x86_pmu.extra_regs = intel_nehalem_extra_regs; + + if (ebx & 0x40) { + /* + * Erratum AAJ80 detected, we work it around by using + * the BR_MISP_EXEC.ANY event. This will over-count + * branch-misses, but it's still much better than the + * architectural event which is often completely bogus: + */ + intel_perfmon_event_map[PERF_COUNT_HW_BRANCH_MISSES] = 0x7f89; + + pr_cont("erratum AAJ80 worked around, "); + } pr_cont("Nehalem events, "); break; @@ -1425,6 +1467,7 @@ static __init int intel_pmu_init(void) case 37: /* 32 nm nehalem, "Clarkdale" */ case 44: /* 32 nm nehalem, "Gulftown" */ + case 47: /* 32 nm Xeon E7 */ memcpy(hw_cache_event_ids, westmere_hw_cache_event_ids, sizeof(hw_cache_event_ids)); memcpy(hw_cache_extra_regs, nehalem_hw_cache_extra_regs, diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c index c2520e178d3..e93fcd55fae 100644 --- a/arch/x86/kernel/cpu/perf_event_p4.c +++ b/arch/x86/kernel/cpu/perf_event_p4.c @@ -947,14 +947,23 @@ static int p4_pmu_handle_irq(struct pt_regs *regs) if (!x86_perf_event_set_period(event)) continue; if (perf_event_overflow(event, 1, &data, regs)) - p4_pmu_disable_event(event); + x86_pmu_stop(event, 0); } - if (handled) { - /* p4 quirk: unmask it again */ - apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED); + if (handled) inc_irq_stat(apic_perf_irqs); - } + + /* + * When dealing with the unmasking of the LVTPC on P4 perf hw, it has + * been observed that the OVF bit flag has to be cleared first _before_ + * the LVTPC can be unmasked. + * + * The reason is the NMI line will continue to be asserted while the OVF + * bit is set. This causes a second NMI to generate if the LVTPC is + * unmasked before the OVF bit is cleared, leading to unknown NMI + * messages. + */ + apic_write(APIC_LVTPC, APIC_DM_NMI); return handled; } diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index 706a9fb46a5..e90f08458e6 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -391,7 +391,7 @@ static int ioapic_xlate(struct irq_domain *id, const u32 *intspec, u32 intsize, set_io_apic_irq_attr(&attr, idx, line, it->trigger, it->polarity); - return io_apic_setup_irq_pin(*out_hwirq, cpu_to_node(0), &attr); + return io_apic_setup_irq_pin_once(*out_hwirq, cpu_to_node(0), &attr); } static void __init ioapic_add_ofnode(struct device_node *np) diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c index c969fd9d156..f1a6244d7d9 100644 --- a/arch/x86/kernel/kprobes.c +++ b/arch/x86/kernel/kprobes.c @@ -1183,12 +1183,13 @@ static void __kprobes optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs) { struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + unsigned long flags; /* This is possible if op is under delayed unoptimizing */ if (kprobe_disabled(&op->kp)) return; - preempt_disable(); + local_irq_save(flags); if (kprobe_running()) { kprobes_inc_nmissed_count(&op->kp); } else { @@ -1207,7 +1208,7 @@ static void __kprobes optimized_callback(struct optimized_kprobe *op, opt_pre_handler(&op->kp, regs); __this_cpu_write(current_kprobe, NULL); } - preempt_enable_no_resched(); + local_irq_restore(flags); } static int __kprobes copy_optimized_instructions(u8 *dest, u8 *src) diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index 82ada01625b..b117efd24f7 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -81,6 +81,9 @@ static u32 gart_unmapped_entry; #define AGPEXTERN #endif +/* GART can only remap to physical addresses < 1TB */ +#define GART_MAX_PHYS_ADDR (1ULL << 40) + /* backdoor interface to AGP driver */ AGPEXTERN int agp_memory_reserved; AGPEXTERN __u32 *agp_gatt_table; @@ -212,9 +215,13 @@ static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem, size_t size, int dir, unsigned long align_mask) { unsigned long npages = iommu_num_pages(phys_mem, size, PAGE_SIZE); - unsigned long iommu_page = alloc_iommu(dev, npages, align_mask); + unsigned long iommu_page; int i; + if (unlikely(phys_mem + size > GART_MAX_PHYS_ADDR)) + return bad_dma_addr; + + iommu_page = alloc_iommu(dev, npages, align_mask); if (iommu_page == -1) { if (!nonforced_iommu(dev, phys_mem, size)) return phys_mem; diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 45892dc4b72..f65e5b521db 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -608,6 +608,9 @@ static int ptrace_write_dr7(struct task_struct *tsk, unsigned long data) unsigned len, type; struct perf_event *bp; + if (ptrace_get_breakpoints(tsk) < 0) + return -ESRCH; + data &= ~DR_CONTROL_RESERVED; old_dr7 = ptrace_get_dr7(thread->ptrace_bps); restore: @@ -655,6 +658,9 @@ restore: } goto restore; } + + ptrace_put_breakpoints(tsk); + return ((orig_ret < 0) ? orig_ret : rc); } @@ -668,10 +674,17 @@ static unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n) if (n < HBP_NUM) { struct perf_event *bp; + + if (ptrace_get_breakpoints(tsk) < 0) + return -ESRCH; + bp = thread->ptrace_bps[n]; if (!bp) - return 0; - val = bp->hw.info.address; + val = 0; + else + val = bp->hw.info.address; + + ptrace_put_breakpoints(tsk); } else if (n == 6) { val = thread->debugreg6; } else if (n == 7) { @@ -686,6 +699,10 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr, struct perf_event *bp; struct thread_struct *t = &tsk->thread; struct perf_event_attr attr; + int err = 0; + + if (ptrace_get_breakpoints(tsk) < 0) + return -ESRCH; if (!t->ptrace_bps[nr]) { ptrace_breakpoint_init(&attr); @@ -709,24 +726,23 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr, * writing for the user. And anyway this is the previous * behaviour. */ - if (IS_ERR(bp)) - return PTR_ERR(bp); + if (IS_ERR(bp)) { + err = PTR_ERR(bp); + goto put; + } t->ptrace_bps[nr] = bp; } else { - int err; - bp = t->ptrace_bps[nr]; attr = bp->attr; attr.bp_addr = addr; err = modify_user_hw_breakpoint(bp, &attr); - if (err) - return err; } - - return 0; +put: + ptrace_put_breakpoints(tsk); + return err; } /* diff --git a/arch/x86/kernel/reboot_32.S b/arch/x86/kernel/reboot_32.S index 29092b38d81..1d5c46df0d7 100644 --- a/arch/x86/kernel/reboot_32.S +++ b/arch/x86/kernel/reboot_32.S @@ -21,26 +21,26 @@ r_base = . /* Get our own relocated address */ call 1f 1: popl %ebx - subl $1b, %ebx + subl $(1b - r_base), %ebx /* Compute the equivalent real-mode segment */ movl %ebx, %ecx shrl $4, %ecx /* Patch post-real-mode segment jump */ - movw dispatch_table(%ebx,%eax,2),%ax - movw %ax, 101f(%ebx) - movw %cx, 102f(%ebx) + movw (dispatch_table - r_base)(%ebx,%eax,2),%ax + movw %ax, (101f - r_base)(%ebx) + movw %cx, (102f - r_base)(%ebx) /* Set up the IDT for real mode. */ - lidtl machine_real_restart_idt(%ebx) + lidtl (machine_real_restart_idt - r_base)(%ebx) /* * Set up a GDT from which we can load segment descriptors for real * mode. The GDT is not used in real mode; it is just needed here to * prepare the descriptors. */ - lgdtl machine_real_restart_gdt(%ebx) + lgdtl (machine_real_restart_gdt - r_base)(%ebx) /* * Load the data segment registers with 16-bit compatible values diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c index c11514e9128..75ef4b18e9b 100644 --- a/arch/x86/kernel/x86_init.c +++ b/arch/x86/kernel/x86_init.c @@ -61,6 +61,10 @@ struct x86_init_ops x86_init __initdata = { .banner = default_banner, }, + .mapping = { + .pagetable_reserve = native_pagetable_reserve, + }, + .paging = { .pagetable_setup_start = native_pagetable_setup_start, .pagetable_setup_done = native_pagetable_setup_done, diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index 1cd608973ce..395bf0114aa 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -7,7 +7,7 @@ * kernel and insert a module (lg.ko) which allows us to run other Linux * kernels the same way we'd run processes. We call the first kernel the Host, * and the others the Guests. The program which sets up and configures Guests - * (such as the example in Documentation/lguest/lguest.c) is called the + * (such as the example in Documentation/virtual/lguest/lguest.c) is called the * Launcher. * * Secondly, we only run specially modified Guests, not normal kernels: setting diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index 286d289b039..37b8b0fe832 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -81,6 +81,11 @@ static void __init find_early_table_space(unsigned long end, int use_pse, end, pgt_buf_start << PAGE_SHIFT, pgt_buf_top << PAGE_SHIFT); } +void __init native_pagetable_reserve(u64 start, u64 end) +{ + memblock_x86_reserve_range(start, end, "PGTABLE"); +} + struct map_range { unsigned long start; unsigned long end; @@ -272,9 +277,24 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, __flush_tlb_all(); + /* + * Reserve the kernel pagetable pages we used (pgt_buf_start - + * pgt_buf_end) and free the other ones (pgt_buf_end - pgt_buf_top) + * so that they can be reused for other purposes. + * + * On native it just means calling memblock_x86_reserve_range, on Xen it + * also means marking RW the pagetable pages that we allocated before + * but that haven't been used. + * + * In fact on xen we mark RO the whole range pgt_buf_start - + * pgt_buf_top, because we have to make sure that when + * init_memory_mapping reaches the pagetable pages area, it maps + * RO all the pagetable pages, including the ones that are beyond + * pgt_buf_end at that time. + */ if (!after_bootmem && pgt_buf_end > pgt_buf_start) - memblock_x86_reserve_range(pgt_buf_start << PAGE_SHIFT, - pgt_buf_end << PAGE_SHIFT, "PGTABLE"); + x86_init.mapping.pagetable_reserve(PFN_PHYS(pgt_buf_start), + PFN_PHYS(pgt_buf_end)); if (!after_bootmem) early_memtest(start, end); diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c index 9559d360fde..745258dfc4d 100644 --- a/arch/x86/mm/numa.c +++ b/arch/x86/mm/numa.c @@ -213,53 +213,48 @@ int early_cpu_to_node(int cpu) return per_cpu(x86_cpu_to_node_map, cpu); } -struct cpumask __cpuinit *debug_cpumask_set_cpu(int cpu, int enable) +void debug_cpumask_set_cpu(int cpu, int node, bool enable) { - int node = early_cpu_to_node(cpu); struct cpumask *mask; char buf[64]; if (node == NUMA_NO_NODE) { /* early_cpu_to_node() already emits a warning and trace */ - return NULL; + return; } mask = node_to_cpumask_map[node]; if (!mask) { pr_err("node_to_cpumask_map[%i] NULL\n", node); dump_stack(); - return NULL; + return; } + if (enable) + cpumask_set_cpu(cpu, mask); + else + cpumask_clear_cpu(cpu, mask); + cpulist_scnprintf(buf, sizeof(buf), mask); printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n", enable ? "numa_add_cpu" : "numa_remove_cpu", cpu, node, buf); - return mask; + return; } # ifndef CONFIG_NUMA_EMU -static void __cpuinit numa_set_cpumask(int cpu, int enable) +static void __cpuinit numa_set_cpumask(int cpu, bool enable) { - struct cpumask *mask; - - mask = debug_cpumask_set_cpu(cpu, enable); - if (!mask) - return; - - if (enable) - cpumask_set_cpu(cpu, mask); - else - cpumask_clear_cpu(cpu, mask); + debug_cpumask_set_cpu(cpu, early_cpu_to_node(cpu), enable); } void __cpuinit numa_add_cpu(int cpu) { - numa_set_cpumask(cpu, 1); + numa_set_cpumask(cpu, true); } void __cpuinit numa_remove_cpu(int cpu) { - numa_set_cpumask(cpu, 0); + numa_set_cpumask(cpu, false); } # endif /* !CONFIG_NUMA_EMU */ diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index e8c00cc7203..85b52fc0308 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -306,7 +306,7 @@ int __init numa_cleanup_meminfo(struct numa_meminfo *mi) bi->end = min(bi->end, high); /* and there's no empty block */ - if (bi->start == bi->end) { + if (bi->start >= bi->end) { numa_remove_memblk_from(i--, mi); continue; } diff --git a/arch/x86/mm/numa_emulation.c b/arch/x86/mm/numa_emulation.c index ad091e4cff1..de84cc14037 100644 --- a/arch/x86/mm/numa_emulation.c +++ b/arch/x86/mm/numa_emulation.c @@ -454,10 +454,9 @@ void __cpuinit numa_remove_cpu(int cpu) cpumask_clear_cpu(cpu, node_to_cpumask_map[i]); } #else /* !CONFIG_DEBUG_PER_CPU_MAPS */ -static void __cpuinit numa_set_cpumask(int cpu, int enable) +static void __cpuinit numa_set_cpumask(int cpu, bool enable) { - struct cpumask *mask; - int nid, physnid, i; + int nid, physnid; nid = early_cpu_to_node(cpu); if (nid == NUMA_NO_NODE) { @@ -467,28 +466,21 @@ static void __cpuinit numa_set_cpumask(int cpu, int enable) physnid = emu_nid_to_phys[nid]; - for_each_online_node(i) { + for_each_online_node(nid) { if (emu_nid_to_phys[nid] != physnid) continue; - mask = debug_cpumask_set_cpu(cpu, enable); - if (!mask) - return; - - if (enable) - cpumask_set_cpu(cpu, mask); - else - cpumask_clear_cpu(cpu, mask); + debug_cpumask_set_cpu(cpu, nid, enable); } } void __cpuinit numa_add_cpu(int cpu) { - numa_set_cpumask(cpu, 1); + numa_set_cpumask(cpu, true); } void __cpuinit numa_remove_cpu(int cpu) { - numa_set_cpumask(cpu, 0); + numa_set_cpumask(cpu, false); } #endif /* !CONFIG_DEBUG_PER_CPU_MAPS */ diff --git a/arch/x86/platform/ce4100/falconfalls.dts b/arch/x86/platform/ce4100/falconfalls.dts index dc701ea5854..e70be38ce03 100644 --- a/arch/x86/platform/ce4100/falconfalls.dts +++ b/arch/x86/platform/ce4100/falconfalls.dts @@ -74,6 +74,7 @@ compatible = "intel,ce4100-pci", "pci"; device_type = "pci"; bus-range = <1 1>; + reg = <0x0800 0x0 0x0 0x0 0x0>; ranges = <0x2000000 0 0xdffe0000 0x2000000 0 0xdffe0000 0 0x1000>; interrupt-parent = <&ioapic2>; @@ -346,7 +347,7 @@ "pciclass0c03"; reg = <0x16800 0x0 0x0 0x0 0x0>; - interrupts = <22 3>; + interrupts = <22 1>; }; usb@d,1 { @@ -356,7 +357,7 @@ "pciclass0c03"; reg = <0x16900 0x0 0x0 0x0 0x0>; - interrupts = <22 3>; + interrupts = <22 1>; }; sata@e,0 { @@ -366,7 +367,7 @@ "pciclass0106"; reg = <0x17000 0x0 0x0 0x0 0x0>; - interrupts = <23 3>; + interrupts = <23 1>; }; flash@f,0 { @@ -412,6 +413,7 @@ #address-cells = <2>; #size-cells = <1>; compatible = "isa"; + reg = <0xf800 0x0 0x0 0x0 0x0>; ranges = <1 0 0 0 0 0x100>; rtc@70 { diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index 5c0207bf959..275dbc19e2c 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -97,11 +97,11 @@ static int __init sfi_parse_mtmr(struct sfi_table_header *table) pentry->freq_hz, pentry->irq); if (!pentry->irq) continue; - mp_irq.type = MP_IOAPIC; + mp_irq.type = MP_INTSRC; mp_irq.irqtype = mp_INT; /* triggering mode edge bit 2-3, active high polarity bit 0-1 */ mp_irq.irqflag = 5; - mp_irq.srcbus = 0; + mp_irq.srcbus = MP_BUS_ISA; mp_irq.srcbusirq = pentry->irq; /* IRQ */ mp_irq.dstapic = MP_APIC_ALL; mp_irq.dstirq = pentry->irq; @@ -168,10 +168,10 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table) for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) { pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n", totallen, (u32)pentry->phys_addr, pentry->irq); - mp_irq.type = MP_IOAPIC; + mp_irq.type = MP_INTSRC; mp_irq.irqtype = mp_INT; mp_irq.irqflag = 0xf; /* level trigger and active low */ - mp_irq.srcbus = 0; + mp_irq.srcbus = MP_BUS_ISA; mp_irq.srcbusirq = pentry->irq; /* IRQ */ mp_irq.dstapic = MP_APIC_ALL; mp_irq.dstirq = pentry->irq; @@ -282,7 +282,7 @@ void __init x86_mrst_early_setup(void) /* Avoid searching for BIOS MP tables */ x86_init.mpparse.find_smp_config = x86_init_noop; x86_init.mpparse.get_smp_config = x86_init_uint_noop; - + set_bit(MP_BUS_ISA, mp_bus_not_pci); } /* diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c index 7cb6424317f..c58e0ea39ef 100644 --- a/arch/x86/platform/uv/tlb_uv.c +++ b/arch/x86/platform/uv/tlb_uv.c @@ -699,16 +699,17 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, struct mm_struct *mm, unsigned long va, unsigned int cpu) { - int tcpu; - int uvhub; int locals = 0; int remotes = 0; int hubs = 0; + int tcpu; + int tpnode; struct bau_desc *bau_desc; struct cpumask *flush_mask; struct ptc_stats *stat; struct bau_control *bcp; struct bau_control *tbcp; + struct hub_and_pnode *hpp; /* kernel was booted 'nobau' */ if (nobau) @@ -750,11 +751,18 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, bau_desc += UV_ITEMS_PER_DESCRIPTOR * bcp->uvhub_cpu; bau_uvhubs_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE); - /* cpu statistics */ for_each_cpu(tcpu, flush_mask) { - uvhub = uv_cpu_to_blade_id(tcpu); - bau_uvhub_set(uvhub, &bau_desc->distribution); - if (uvhub == bcp->uvhub) + /* + * The distribution vector is a bit map of pnodes, relative + * to the partition base pnode (and the partition base nasid + * in the header). + * Translate cpu to pnode and hub using an array stored + * in local memory. + */ + hpp = &bcp->socket_master->target_hub_and_pnode[tcpu]; + tpnode = hpp->pnode - bcp->partition_base_pnode; + bau_uvhub_set(tpnode, &bau_desc->distribution); + if (hpp->uvhub == bcp->uvhub) locals++; else remotes++; @@ -855,7 +863,7 @@ void uv_bau_message_interrupt(struct pt_regs *regs) * an interrupt, but causes an error message to be returned to * the sender. */ -static void uv_enable_timeouts(void) +static void __init uv_enable_timeouts(void) { int uvhub; int nuvhubs; @@ -1326,10 +1334,10 @@ static int __init uv_ptc_init(void) } /* - * initialize the sending side's sending buffers + * Initialize the sending side's sending buffers. */ static void -uv_activation_descriptor_init(int node, int pnode) +uv_activation_descriptor_init(int node, int pnode, int base_pnode) { int i; int cpu; @@ -1352,11 +1360,11 @@ uv_activation_descriptor_init(int node, int pnode) n = pa >> uv_nshift; m = pa & uv_mmask; + /* the 14-bit pnode */ uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE, (n << UV_DESC_BASE_PNODE_SHIFT | m)); - /* - * initializing all 8 (UV_ITEMS_PER_DESCRIPTOR) descriptors for each + * Initializing all 8 (UV_ITEMS_PER_DESCRIPTOR) descriptors for each * cpu even though we only use the first one; one descriptor can * describe a broadcast to 256 uv hubs. */ @@ -1365,12 +1373,13 @@ uv_activation_descriptor_init(int node, int pnode) memset(bd2, 0, sizeof(struct bau_desc)); bd2->header.sw_ack_flag = 1; /* - * base_dest_nodeid is the nasid of the first uvhub - * in the partition. The bit map will indicate uvhub numbers, - * which are 0-N in a partition. Pnodes are unique system-wide. + * The base_dest_nasid set in the message header is the nasid + * of the first uvhub in the partition. The bit map will + * indicate destination pnode numbers relative to that base. + * They may not be consecutive if nasid striding is being used. */ - bd2->header.base_dest_nodeid = UV_PNODE_TO_NASID(uv_partition_base_pnode); - bd2->header.dest_subnodeid = 0x10; /* the LB */ + bd2->header.base_dest_nasid = UV_PNODE_TO_NASID(base_pnode); + bd2->header.dest_subnodeid = UV_LB_SUBNODEID; bd2->header.command = UV_NET_ENDPOINT_INTD; bd2->header.int_both = 1; /* @@ -1442,7 +1451,7 @@ uv_payload_queue_init(int node, int pnode) /* * Initialization of each UV hub's structures */ -static void __init uv_init_uvhub(int uvhub, int vector) +static void __init uv_init_uvhub(int uvhub, int vector, int base_pnode) { int node; int pnode; @@ -1450,11 +1459,11 @@ static void __init uv_init_uvhub(int uvhub, int vector) node = uvhub_to_first_node(uvhub); pnode = uv_blade_to_pnode(uvhub); - uv_activation_descriptor_init(node, pnode); + uv_activation_descriptor_init(node, pnode, base_pnode); uv_payload_queue_init(node, pnode); /* - * the below initialization can't be in firmware because the - * messaging IRQ will be determined by the OS + * The below initialization can't be in firmware because the + * messaging IRQ will be determined by the OS. */ apicid = uvhub_to_first_apicid(uvhub) | uv_apicid_hibits; uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG, @@ -1491,10 +1500,11 @@ calculate_destination_timeout(void) /* * initialize the bau_control structure for each cpu */ -static int __init uv_init_per_cpu(int nuvhubs) +static int __init uv_init_per_cpu(int nuvhubs, int base_part_pnode) { int i; int cpu; + int tcpu; int pnode; int uvhub; int have_hmaster; @@ -1528,6 +1538,15 @@ static int __init uv_init_per_cpu(int nuvhubs) bcp = &per_cpu(bau_control, cpu); memset(bcp, 0, sizeof(struct bau_control)); pnode = uv_cpu_hub_info(cpu)->pnode; + if ((pnode - base_part_pnode) >= UV_DISTRIBUTION_SIZE) { + printk(KERN_EMERG + "cpu %d pnode %d-%d beyond %d; BAU disabled\n", + cpu, pnode, base_part_pnode, + UV_DISTRIBUTION_SIZE); + return 1; + } + bcp->osnode = cpu_to_node(cpu); + bcp->partition_base_pnode = uv_partition_base_pnode; uvhub = uv_cpu_hub_info(cpu)->numa_blade_id; *(uvhub_mask + (uvhub/8)) |= (1 << (uvhub%8)); bdp = &uvhub_descs[uvhub]; @@ -1536,7 +1555,7 @@ static int __init uv_init_per_cpu(int nuvhubs) bdp->pnode = pnode; /* kludge: 'assuming' one node per socket, and assuming that disabling a socket just leaves a gap in node numbers */ - socket = (cpu_to_node(cpu) & 1); + socket = bcp->osnode & 1; bdp->socket_mask |= (1 << socket); sdp = &bdp->socket[socket]; sdp->cpu_number[sdp->num_cpus] = cpu; @@ -1585,6 +1604,20 @@ static int __init uv_init_per_cpu(int nuvhubs) nextsocket: socket++; socket_mask = (socket_mask >> 1); + /* each socket gets a local array of pnodes/hubs */ + bcp = smaster; + bcp->target_hub_and_pnode = kmalloc_node( + sizeof(struct hub_and_pnode) * + num_possible_cpus(), GFP_KERNEL, bcp->osnode); + memset(bcp->target_hub_and_pnode, 0, + sizeof(struct hub_and_pnode) * + num_possible_cpus()); + for_each_present_cpu(tcpu) { + bcp->target_hub_and_pnode[tcpu].pnode = + uv_cpu_hub_info(tcpu)->pnode; + bcp->target_hub_and_pnode[tcpu].uvhub = + uv_cpu_hub_info(tcpu)->numa_blade_id; + } } } kfree(uvhub_descs); @@ -1637,21 +1670,22 @@ static int __init uv_bau_init(void) spin_lock_init(&disable_lock); congested_cycles = microsec_2_cycles(congested_response_us); - if (uv_init_per_cpu(nuvhubs)) { - nobau = 1; - return 0; - } - uv_partition_base_pnode = 0x7fffffff; - for (uvhub = 0; uvhub < nuvhubs; uvhub++) + for (uvhub = 0; uvhub < nuvhubs; uvhub++) { if (uv_blade_nr_possible_cpus(uvhub) && (uv_blade_to_pnode(uvhub) < uv_partition_base_pnode)) uv_partition_base_pnode = uv_blade_to_pnode(uvhub); + } + + if (uv_init_per_cpu(nuvhubs, uv_partition_base_pnode)) { + nobau = 1; + return 0; + } vector = UV_BAU_MESSAGE; for_each_possible_blade(uvhub) if (uv_blade_nr_possible_cpus(uvhub)) - uv_init_uvhub(uvhub, vector); + uv_init_uvhub(uvhub, vector, uv_partition_base_pnode); uv_enable_timeouts(); alloc_intr_gate(vector, uv_bau_message_intr1); diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig index 1c7121ba18f..5cc821cb2e0 100644 --- a/arch/x86/xen/Kconfig +++ b/arch/x86/xen/Kconfig @@ -39,6 +39,7 @@ config XEN_MAX_DOMAIN_MEMORY config XEN_SAVE_RESTORE bool depends on XEN + select HIBERNATE_CALLBACKS default y config XEN_DEBUG_FS diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 49dbd78ec3c..e3c6a06cf72 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -238,6 +238,7 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx, static __init void xen_init_cpuid_mask(void) { unsigned int ax, bx, cx, dx; + unsigned int xsave_mask; cpuid_leaf1_edx_mask = ~((1 << X86_FEATURE_MCE) | /* disable MCE */ @@ -249,24 +250,16 @@ static __init void xen_init_cpuid_mask(void) cpuid_leaf1_edx_mask &= ~((1 << X86_FEATURE_APIC) | /* disable local APIC */ (1 << X86_FEATURE_ACPI)); /* disable ACPI */ - ax = 1; - cx = 0; xen_cpuid(&ax, &bx, &cx, &dx); - /* cpuid claims we support xsave; try enabling it to see what happens */ - if (cx & (1 << (X86_FEATURE_XSAVE % 32))) { - unsigned long cr4; - - set_in_cr4(X86_CR4_OSXSAVE); - - cr4 = read_cr4(); + xsave_mask = + (1 << (X86_FEATURE_XSAVE % 32)) | + (1 << (X86_FEATURE_OSXSAVE % 32)); - if ((cr4 & X86_CR4_OSXSAVE) == 0) - cpuid_leaf1_ecx_mask &= ~(1 << (X86_FEATURE_XSAVE % 32)); - - clear_in_cr4(X86_CR4_OSXSAVE); - } + /* Xen will set CR4.OSXSAVE if supported and not disabled by force */ + if ((cx & xsave_mask) != xsave_mask) + cpuid_leaf1_ecx_mask &= ~xsave_mask; /* disable XSAVE & OSXSAVE */ } static void xen_set_debugreg(int reg, unsigned long val) diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index c82df6c9c0f..0684f3c74d5 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -565,13 +565,13 @@ pte_t xen_make_pte_debug(pteval_t pte) if (io_page && (xen_initial_domain() || addr >= ISA_END_ADDRESS)) { other_addr = pfn_to_mfn(addr >> PAGE_SHIFT) << PAGE_SHIFT; - WARN(addr != other_addr, + WARN_ONCE(addr != other_addr, "0x%lx is using VM_IO, but it is 0x%lx!\n", (unsigned long)addr, (unsigned long)other_addr); } else { pteval_t iomap_set = (_pte.pte & PTE_FLAGS_MASK) & _PAGE_IOMAP; other_addr = (_pte.pte & PTE_PFN_MASK); - WARN((addr == other_addr) && (!io_page) && (!iomap_set), + WARN_ONCE((addr == other_addr) && (!io_page) && (!iomap_set), "0x%lx is missing VM_IO (and wasn't fixed)!\n", (unsigned long)addr); } @@ -1275,6 +1275,20 @@ static __init void xen_pagetable_setup_start(pgd_t *base) { } +static __init void xen_mapping_pagetable_reserve(u64 start, u64 end) +{ + /* reserve the range used */ + native_pagetable_reserve(start, end); + + /* set as RW the rest */ + printk(KERN_DEBUG "xen: setting RW the range %llx - %llx\n", end, + PFN_PHYS(pgt_buf_top)); + while (end < PFN_PHYS(pgt_buf_top)) { + make_lowmem_page_readwrite(__va(end)); + end += PAGE_SIZE; + } +} + static void xen_post_allocator_init(void); static __init void xen_pagetable_setup_done(pgd_t *base) @@ -1473,16 +1487,20 @@ static void xen_pgd_free(struct mm_struct *mm, pgd_t *pgd) #endif } +#ifdef CONFIG_X86_32 static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte) { - unsigned long pfn = pte_pfn(pte); - -#ifdef CONFIG_X86_32 /* If there's an existing pte, then don't allow _PAGE_RW to be set */ if (pte_val_ma(*ptep) & _PAGE_PRESENT) pte = __pte_ma(((pte_val_ma(*ptep) & _PAGE_RW) | ~_PAGE_RW) & pte_val_ma(pte)); -#endif + + return pte; +} +#else /* CONFIG_X86_64 */ +static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte) +{ + unsigned long pfn = pte_pfn(pte); /* * If the new pfn is within the range of the newly allocated @@ -1491,12 +1509,13 @@ static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte) * it is RO. */ if (((!is_early_ioremap_ptep(ptep) && - pfn >= pgt_buf_start && pfn < pgt_buf_end)) || + pfn >= pgt_buf_start && pfn < pgt_buf_top)) || (is_early_ioremap_ptep(ptep) && pfn != (pgt_buf_end - 1))) pte = pte_wrprotect(pte); return pte; } +#endif /* CONFIG_X86_64 */ /* Init-time set_pte while constructing initial pagetables, which doesn't allow RO pagetable pages to be remapped RW */ @@ -2100,6 +2119,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { void __init xen_init_mmu_ops(void) { + x86_init.mapping.pagetable_reserve = xen_mapping_pagetable_reserve; x86_init.paging.pagetable_setup_start = xen_pagetable_setup_start; x86_init.paging.pagetable_setup_done = xen_pagetable_setup_done; pv_mmu_ops = xen_mmu_ops; diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index fa0269a9937..90bac0aac3a 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -227,7 +227,7 @@ char * __init xen_memory_setup(void) memcpy(map_raw, map, sizeof(map)); e820.nr_map = 0; - xen_extra_mem_start = mem_end; + xen_extra_mem_start = max((1ULL << 32), mem_end); for (i = 0; i < memmap.nr_entries; i++) { unsigned long long end; diff --git a/arch/xtensa/kernel/irq.c b/arch/xtensa/kernel/irq.c index d77089df412..4340ee076bd 100644 --- a/arch/xtensa/kernel/irq.c +++ b/arch/xtensa/kernel/irq.c @@ -64,47 +64,41 @@ asmlinkage void do_IRQ(int irq, struct pt_regs *regs) int arch_show_interrupts(struct seq_file *p, int prec) { - int j; - - seq_printf(p, "%*s: ", prec, "NMI"); - for_each_online_cpu(j) - seq_printf(p, "%10u ", nmi_count(j)); - seq_putc(p, '\n'); seq_printf(p, "%*s: ", prec, "ERR"); seq_printf(p, "%10u\n", atomic_read(&irq_err_count)); return 0; } -static void xtensa_irq_mask(struct irq_chip *d) +static void xtensa_irq_mask(struct irq_data *d) { cached_irq_mask &= ~(1 << d->irq); set_sr (cached_irq_mask, INTENABLE); } -static void xtensa_irq_unmask(struct irq_chip *d) +static void xtensa_irq_unmask(struct irq_data *d) { cached_irq_mask |= 1 << d->irq; set_sr (cached_irq_mask, INTENABLE); } -static void xtensa_irq_enable(struct irq_chip *d) +static void xtensa_irq_enable(struct irq_data *d) { variant_irq_enable(d->irq); xtensa_irq_unmask(d->irq); } -static void xtensa_irq_disable(struct irq_chip *d) +static void xtensa_irq_disable(struct irq_data *d) { xtensa_irq_mask(d->irq); variant_irq_disable(d->irq); } -static void xtensa_irq_ack(struct irq_chip *d) +static void xtensa_irq_ack(struct irq_data *d) { set_sr(1 << d->irq, INTCLEAR); } -static int xtensa_irq_retrigger(struct irq_chip *d) +static int xtensa_irq_retrigger(struct irq_data *d) { set_sr (1 << d->irq, INTSET); return 1; |