diff options
Diffstat (limited to 'arch')
426 files changed, 10676 insertions, 6815 deletions
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 64e450dddb4..167fd89f870 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -1150,16 +1150,13 @@ osf_usleep_thread(struct timeval32 __user *sleep, struct timeval32 __user *remai if (get_tv32(&tmp, sleep)) goto fault; - ticks = tmp.tv_usec; - ticks = (ticks + (1000000 / HZ) - 1) / (1000000 / HZ); - ticks += tmp.tv_sec * HZ; + ticks = timeval_to_jiffies(&tmp); current->state = TASK_INTERRUPTIBLE; ticks = schedule_timeout(ticks); if (remain) { - tmp.tv_sec = ticks / HZ; - tmp.tv_usec = ticks % HZ; + jiffies_to_timeval(ticks, &tmp); if (put_tv32(remain, &tmp)) goto fault; } diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index bf397a9f8ac..ee8a9ad7bbd 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -67,10 +67,6 @@ config GENERIC_BUST_SPINLOCK config GENERIC_ISA_DMA bool -config GENERIC_IOMAP - bool - default y - config FIQ bool @@ -202,6 +198,11 @@ config ARCH_H720X help This enables support for systems based on the Hynix HMS720x +config ARCH_AAEC2000 + bool "Agilent AAEC-2000 based" + help + This enables support for systems based on the Agilent AAEC-2000 + endchoice source "arch/arm/mach-clps711x/Kconfig" @@ -234,6 +235,8 @@ source "arch/arm/mach-h720x/Kconfig" source "arch/arm/mach-versatile/Kconfig" +source "arch/arm/mach-aaec2000/Kconfig" + # Definitions to make life easier config ARCH_ACORN bool @@ -277,7 +280,7 @@ config ISA_DMA_API default y config PCI - bool "PCI support" if ARCH_INTEGRATOR_AP + bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB help Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside @@ -497,7 +500,7 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_SA1100 bool - depends on CPU_FREQ && (SA1100_LART || SA1100_PLEB) + depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT) default y config CPU_FREQ_SA1110 @@ -689,7 +692,9 @@ source "drivers/block/Kconfig" source "drivers/acorn/block/Kconfig" -if ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE +if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \ + || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ + || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE source "drivers/ide/Kconfig" endif diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 2277e3d179c..8330495e244 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -97,6 +97,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000 machine-$(CONFIG_ARCH_VERSATILE) := versatile machine-$(CONFIG_ARCH_IMX) := imx machine-$(CONFIG_ARCH_H720X) := h720x + machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S index 665bd2c2074..d3fe2533907 100644 --- a/arch/arm/boot/compressed/head-xscale.S +++ b/arch/arm/boot/compressed/head-xscale.S @@ -47,3 +47,10 @@ __XScale_start: orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00) #endif +#ifdef CONFIG_ARCH_IXP2000 + mov r1, #-1 + mov r0, #0xd6000000 + str r1, [r0, #0x14] + str r1, [r0, #0x18] +#endif + diff --git a/arch/arm/common/amba.c b/arch/arm/common/amba.c index a0507f8c33f..c6beb751f2a 100644 --- a/arch/arm/common/amba.c +++ b/arch/arm/common/amba.c @@ -169,7 +169,7 @@ static void amba_device_release(struct device *dev) } #define amba_attr(name,fmt,arg...) \ -static ssize_t show_##name(struct device *_dev, char *buf) \ +static ssize_t show_##name(struct device *_dev, struct device_attribute *attr, char *buf) \ { \ struct amba_device *dev = to_amba_device(_dev); \ return sprintf(buf, fmt, arg); \ diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 5797b1b100a..9d63a01214e 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -30,6 +30,8 @@ #include <linux/dmapool.h> #include <linux/list.h> +#include <asm/cacheflush.h> + #undef DEBUG #undef STATS @@ -302,12 +304,24 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, DO_STATS ( device_info->bounce_count++ ); - if ((dir == DMA_FROM_DEVICE) || - (dir == DMA_BIDIRECTIONAL)) { + if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) { + unsigned long ptr; + dev_dbg(dev, "%s: copy back safe %p to unsafe %p size %d\n", __func__, buf->safe, buf->ptr, size); memcpy(buf->ptr, buf->safe, size); + + /* + * DMA buffers must have the same cache properties + * as if they were really used for DMA - which means + * data must be written back to RAM. Note that + * we don't use dmac_flush_range() here for the + * bidirectional case because we know the cache + * lines will be coherent with the data written. + */ + ptr = (unsigned long)buf->ptr; + dmac_clean_range(ptr, ptr + size); } free_safe_buffer(device_info, buf); } diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c index c2c557a224c..c94864c5b1a 100644 --- a/arch/arm/common/sharpsl_param.c +++ b/arch/arm/common/sharpsl_param.c @@ -22,7 +22,7 @@ * them early in the boot process, then pass them to the appropriate drivers. * Not all devices use all paramaters but the format is common to all. */ -#ifdef ARCH_SA1100 +#ifdef CONFIG_ARCH_SA1100 #define PARAM_BASE 0xe8ffc000 #else #define PARAM_BASE 0xa0000a00 diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index 2b4059d2f8e..5d92af975d8 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sat Mar 26 21:32:26 2005 +# Linux kernel version: 2.6.12-rc6-git3 +# Thu Jun 9 19:00:50 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -16,6 +16,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -34,6 +35,8 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -109,7 +112,6 @@ CONFIG_CPU_ABRT_EV4=y CONFIG_CPU_CACHE_V4WB=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WB=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -122,6 +124,7 @@ CONFIG_FORCE_MAX_ZONEORDER=9 # Bus support # CONFIG_ISA=y +CONFIG_ISA_DMA_API=y # # PCCARD (PCMCIA/CardBus) support @@ -131,6 +134,7 @@ CONFIG_ISA=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set CONFIG_DISCONTIGMEM=y # CONFIG_LEDS is not set @@ -152,12 +156,14 @@ CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_SA1100=y # # Floating point emulation @@ -294,7 +300,6 @@ CONFIG_PARPORT_NOT_PC=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_DEV_COW_COMMON is not set @@ -428,7 +433,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -526,6 +530,7 @@ CONFIG_IRDA_ULTRA=y # CONFIG_SMC_IRCC_FIR is not set # CONFIG_ALI_FIR is not set CONFIG_SA1100_FIR=y +# CONFIG_VIA_FIR is not set CONFIG_BT=m CONFIG_BT_L2CAP=m # CONFIG_BT_SCO is not set @@ -618,7 +623,6 @@ CONFIG_NET_WIRELESS=y # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -687,7 +691,6 @@ CONFIG_RTC=m # # TPM devices # -# CONFIG_TCG_TPM is not set # # I2C support @@ -736,6 +739,7 @@ CONFIG_I2C_ELEKTOR=m # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -747,6 +751,7 @@ CONFIG_I2C_ELEKTOR=m # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -871,7 +876,6 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DEBUG=y -# CONFIG_USB_STORAGE_RW_DETECT is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set @@ -954,9 +958,11 @@ CONFIG_USB_USS720=m # CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set CONFIG_USB_SERIAL_BELKIN=m CONFIG_USB_SERIAL_WHITEHEAT=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m @@ -985,6 +991,7 @@ CONFIG_USB_SERIAL_KEYSPAN=m # CONFIG_USB_SERIAL_KOBIL_SCT is not set CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_TI is not set CONFIG_USB_SERIAL_CYBERJACK=m diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/enp2611_defconfig index e8f9fccffe8..06fae4b6277 100644 --- a/arch/arm/configs/enp2611_defconfig +++ b/arch/arm/configs/enp2611_defconfig @@ -50,7 +50,13 @@ CONFIG_BASE_SMALL=0 # # Loadable module support # -# CONFIG_MODULES is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y # # System Type diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig index b4e297dd54b..b9de07de80f 100644 --- a/arch/arm/configs/h3600_defconfig +++ b/arch/arm/configs/h3600_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Mon Mar 28 00:02:26 2005 +# Linux kernel version: 2.6.12-rc4 +# Thu Jun 9 01:59:03 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -16,6 +16,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -33,6 +34,8 @@ CONFIG_KOBJECT_UEVENT=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -120,6 +123,7 @@ CONFIG_CPU_MINICACHE=y # Bus support # CONFIG_ISA=y +CONFIG_ISA_DMA_API=y # # PCCARD (PCMCIA/CardBus) support @@ -138,6 +142,7 @@ CONFIG_PCMCIA_SA1100=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set CONFIG_DISCONTIGMEM=y # CONFIG_LEDS is not set @@ -159,12 +164,13 @@ CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +CONFIG_CPU_FREQ_SA1100=y # # Floating point emulation @@ -298,7 +304,6 @@ CONFIG_MTD_SA1100=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m @@ -379,7 +384,6 @@ CONFIG_NET=y # Networking options # # CONFIG_PACKET is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -476,6 +480,7 @@ CONFIG_IRCOMM=m # CONFIG_SMC_IRCC_FIR is not set # CONFIG_ALI_FIR is not set CONFIG_SA1100_FIR=m +# CONFIG_VIA_FIR is not set # CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set @@ -647,7 +652,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # -# CONFIG_TCG_TPM is not set # # I2C support @@ -676,9 +680,11 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set CONFIG_FB_SA1100=y +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig index 6987c8c5ddb..fb41a36a5a6 100644 --- a/arch/arm/configs/hackkit_defconfig +++ b/arch/arm/configs/hackkit_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Mon Mar 28 00:22:34 2005 +# Linux kernel version: 2.6.12-rc6-git3 +# Thu Jun 9 20:58:58 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -16,6 +16,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -34,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -109,7 +112,6 @@ CONFIG_CPU_ABRT_EV4=y CONFIG_CPU_CACHE_V4WB=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WB=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -119,6 +121,7 @@ CONFIG_CPU_MINICACHE=y # Bus support # CONFIG_ISA=y +CONFIG_ISA_DMA_API=y # # PCCARD (PCMCIA/CardBus) support @@ -128,6 +131,7 @@ CONFIG_ISA=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set CONFIG_DISCONTIGMEM=y CONFIG_LEDS=y @@ -151,12 +155,14 @@ CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_SA1100=y # # Floating point emulation @@ -280,7 +286,6 @@ CONFIG_MTD_CFI_UTIL=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set @@ -338,7 +343,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -484,7 +488,6 @@ CONFIG_SERIO=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -533,7 +536,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # -# CONFIG_TCG_TPM is not set # # I2C support diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig index 4fd663ecbe3..810a450a55d 100644 --- a/arch/arm/configs/ixdp2400_defconfig +++ b/arch/arm/configs/ixdp2400_defconfig @@ -50,7 +50,13 @@ CONFIG_BASE_SMALL=0 # # Loadable module support # -# CONFIG_MODULES is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y # # System Type diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig index 6f51c98084a..72e1b940e97 100644 --- a/arch/arm/configs/ixdp2401_defconfig +++ b/arch/arm/configs/ixdp2401_defconfig @@ -50,7 +50,13 @@ CONFIG_BASE_SMALL=0 # # Loadable module support # -# CONFIG_MODULES is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y # # System Type diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig index 7be3521f91f..1592e45f027 100644 --- a/arch/arm/configs/ixdp2800_defconfig +++ b/arch/arm/configs/ixdp2800_defconfig @@ -50,7 +50,13 @@ CONFIG_BASE_SMALL=0 # # Loadable module support # -# CONFIG_MODULES is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y # # System Type diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig index cd84a20f30f..f1afe3d09ec 100644 --- a/arch/arm/configs/ixdp2801_defconfig +++ b/arch/arm/configs/ixdp2801_defconfig @@ -50,7 +50,13 @@ CONFIG_BASE_SMALL=0 # # Loadable module support # -# CONFIG_MODULES is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y # # System Type diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 4a2af55e134..3e1b0327e4d 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -6,7 +6,7 @@ AFLAGS_head.o := -DTEXTADDR=$(TEXTADDR) -DDATAADDR=$(DATAADDR) # Object file lists. -obj-y := arch.o compat.o dma.o entry-armv.o entry-common.o irq.o \ +obj-y := compat.o dma.o entry-armv.o entry-common.o irq.o \ process.o ptrace.o semaphore.o setup.o signal.o sys_arm.o \ time.o traps.o diff --git a/arch/arm/kernel/arch.c b/arch/arm/kernel/arch.c deleted file mode 100644 index 4e02fbeb10a..00000000000 --- a/arch/arm/kernel/arch.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * linux/arch/arm/kernel/arch.c - * - * Architecture specific fixups. - */ -#include <linux/config.h> -#include <linux/init.h> -#include <linux/types.h> - -#include <asm/elf.h> -#include <asm/page.h> -#include <asm/setup.h> -#include <asm/mach/arch.h> - -unsigned int vram_size; - -#ifdef CONFIG_ARCH_ACORN - -unsigned int memc_ctrl_reg; -unsigned int number_mfm_drives; - -static int __init parse_tag_acorn(const struct tag *tag) -{ - memc_ctrl_reg = tag->u.acorn.memc_control_reg; - number_mfm_drives = tag->u.acorn.adfsdrives; - - switch (tag->u.acorn.vram_pages) { - case 512: - vram_size += PAGE_SIZE * 256; - case 256: - vram_size += PAGE_SIZE * 256; - default: - break; - } -#if 0 - if (vram_size) { - desc->video_start = 0x02000000; - desc->video_end = 0x02000000 + vram_size; - } -#endif - return 0; -} - -__tagtable(ATAG_ACORN, parse_tag_acorn); - -#endif diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index 3dc15b131f5..6540db69133 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -866,19 +866,19 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot) return ec; } -static ssize_t ecard_show_irq(struct device *dev, char *buf) +static ssize_t ecard_show_irq(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%u\n", ec->irq); } -static ssize_t ecard_show_dma(struct device *dev, char *buf) +static ssize_t ecard_show_dma(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%u\n", ec->dma); } -static ssize_t ecard_show_resources(struct device *dev, char *buf) +static ssize_t ecard_show_resources(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); char *str = buf; @@ -893,19 +893,19 @@ static ssize_t ecard_show_resources(struct device *dev, char *buf) return str - buf; } -static ssize_t ecard_show_vendor(struct device *dev, char *buf) +static ssize_t ecard_show_vendor(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%u\n", ec->cid.manufacturer); } -static ssize_t ecard_show_device(struct device *dev, char *buf) +static ssize_t ecard_show_device(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%u\n", ec->cid.product); } -static ssize_t ecard_show_type(struct device *dev, char *buf) +static ssize_t ecard_show_type(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%s\n", ec->type == ECARD_EASI ? "EASI" : "IOC"); diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 4eb36155dc9..39a6c1b0b9a 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -24,48 +24,91 @@ #include "entry-header.S" /* + * Interrupt handling. Preserves r7, r8, r9 + */ + .macro irq_handler +1: get_irqnr_and_base r0, r6, r5, lr + movne r1, sp + @ + @ routine called with r0 = irq number, r1 = struct pt_regs * + @ + adrne lr, 1b + bne asm_do_IRQ + +#ifdef CONFIG_SMP + /* + * XXX + * + * this macro assumes that irqstat (r6) and base (r5) are + * preserved from get_irqnr_and_base above + */ + test_for_ipi r0, r6, r5, lr + movne r0, sp + adrne lr, 1b + bne do_IPI +#endif + + .endm + +/* * Invalid mode handlers */ - .macro inv_entry, sym, reason - sub sp, sp, #S_FRAME_SIZE @ Allocate frame size in one go - stmia sp, {r0 - lr} @ Save XXX r0 - lr - ldr r4, .LC\sym + .macro inv_entry, reason + sub sp, sp, #S_FRAME_SIZE + stmib sp, {r1 - lr} mov r1, #\reason .endm __pabt_invalid: - inv_entry abt, BAD_PREFETCH - b 1f + inv_entry BAD_PREFETCH + b common_invalid __dabt_invalid: - inv_entry abt, BAD_DATA - b 1f + inv_entry BAD_DATA + b common_invalid __irq_invalid: - inv_entry irq, BAD_IRQ - b 1f + inv_entry BAD_IRQ + b common_invalid __und_invalid: - inv_entry und, BAD_UNDEFINSTR + inv_entry BAD_UNDEFINSTR + + @ + @ XXX fall through to common_invalid + @ + +@ +@ common_invalid - generic code for failed exception (re-entrant version of handlers) +@ +common_invalid: + zero_fp + + ldmia r0, {r4 - r6} + add r0, sp, #S_PC @ here for interlock avoidance + mov r7, #-1 @ "" "" "" "" + str r4, [sp] @ save preserved r0 + stmia r0, {r5 - r7} @ lr_<exception>, + @ cpsr_<exception>, "old_r0" -1: zero_fp - ldmia r4, {r5 - r7} @ Get XXX pc, cpsr, old_r0 - add r4, sp, #S_PC - stmia r4, {r5 - r7} @ Save XXX pc, cpsr, old_r0 mov r0, sp - and r2, r6, #31 @ int mode + and r2, r6, #0x1f b bad_mode /* * SVC mode handlers */ - .macro svc_entry, sym + .macro svc_entry sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} @ save r0 - r12 - ldr r2, .LC\sym - add r0, sp, #S_FRAME_SIZE - ldmia r2, {r2 - r4} @ get pc, cpsr - add r5, sp, #S_SP + stmib sp, {r1 - r12} + + ldmia r0, {r1 - r3} + add r5, sp, #S_SP @ here for interlock avoidance + mov r4, #-1 @ "" "" "" "" + add r0, sp, #S_FRAME_SIZE @ "" "" "" "" + str r1, [sp] @ save the "real" r0 copied + @ from the exception stack + mov r1, lr @ @@ -82,7 +125,7 @@ __und_invalid: .align 5 __dabt_svc: - svc_entry abt + svc_entry @ @ get ready to re-enable interrupts if appropriate @@ -129,28 +172,24 @@ __dabt_svc: .align 5 __irq_svc: - svc_entry irq + svc_entry + #ifdef CONFIG_PREEMPT - get_thread_info r8 - ldr r9, [r8, #TI_PREEMPT] @ get preempt count - add r7, r9, #1 @ increment it - str r7, [r8, #TI_PREEMPT] + get_thread_info tsk + ldr r8, [tsk, #TI_PREEMPT] @ get preempt count + add r7, r8, #1 @ increment it + str r7, [tsk, #TI_PREEMPT] #endif -1: get_irqnr_and_base r0, r6, r5, lr - movne r1, sp - @ - @ routine called with r0 = irq number, r1 = struct pt_regs * - @ - adrne lr, 1b - bne asm_do_IRQ + + irq_handler #ifdef CONFIG_PREEMPT - ldr r0, [r8, #TI_FLAGS] @ get flags + ldr r0, [tsk, #TI_FLAGS] @ get flags tst r0, #_TIF_NEED_RESCHED blne svc_preempt preempt_return: - ldr r0, [r8, #TI_PREEMPT] @ read preempt value + ldr r0, [tsk, #TI_PREEMPT] @ read preempt value + str r8, [tsk, #TI_PREEMPT] @ restore preempt count teq r0, r7 - str r9, [r8, #TI_PREEMPT] @ restore preempt count strne r0, [r0, -r0] @ bug() #endif ldr r0, [sp, #S_PSR] @ irqs are already disabled @@ -161,7 +200,7 @@ preempt_return: #ifdef CONFIG_PREEMPT svc_preempt: - teq r9, #0 @ was preempt count = 0 + teq r8, #0 @ was preempt count = 0 ldreq r6, .LCirq_stat movne pc, lr @ no ldr r0, [r6, #4] @ local_irq_count @@ -169,9 +208,9 @@ svc_preempt: adds r0, r0, r1 movne pc, lr mov r7, #0 @ preempt_schedule_irq - str r7, [r8, #TI_PREEMPT] @ expects preempt_count == 0 + str r7, [tsk, #TI_PREEMPT] @ expects preempt_count == 0 1: bl preempt_schedule_irq @ irq en/disable is done inside - ldr r0, [r8, #TI_FLAGS] @ get new tasks TI_FLAGS + ldr r0, [tsk, #TI_FLAGS] @ get new tasks TI_FLAGS tst r0, #_TIF_NEED_RESCHED beq preempt_return @ go again b 1b @@ -179,7 +218,7 @@ svc_preempt: .align 5 __und_svc: - svc_entry und + svc_entry @ @ call emulation code, which returns using r9 if it has emulated @@ -209,7 +248,7 @@ __und_svc: .align 5 __pabt_svc: - svc_entry abt + svc_entry @ @ re-enable interrupts if appropriate @@ -242,12 +281,8 @@ __pabt_svc: ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr .align 5 -.LCirq: - .word __temp_irq -.LCund: - .word __temp_und -.LCabt: - .word __temp_abt +.LCcralign: + .word cr_alignment #ifdef MULTI_ABORT .LCprocfns: .word processor @@ -262,14 +297,18 @@ __pabt_svc: /* * User mode handlers */ - .macro usr_entry, sym - sub sp, sp, #S_FRAME_SIZE @ Allocate frame size in one go - stmia sp, {r0 - r12} @ save r0 - r12 - ldr r7, .LC\sym - add r5, sp, #S_PC - ldmia r7, {r2 - r4} @ Get USR pc, cpsr - -#if __LINUX_ARM_ARCH__ < 6 + .macro usr_entry + sub sp, sp, #S_FRAME_SIZE + stmib sp, {r1 - r12} + + ldmia r0, {r1 - r3} + add r0, sp, #S_PC @ here for interlock avoidance + mov r4, #-1 @ "" "" "" "" + + str r1, [sp] @ save the "real" r0 copied + @ from the exception stack + +#if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) @ make sure our user space atomic helper is aborted cmp r2, #VIRT_OFFSET bichs r3, r3, #PSR_Z_BIT @@ -284,13 +323,13 @@ __pabt_svc: @ @ Also, separately save sp_usr and lr_usr @ - stmia r5, {r2 - r4} - stmdb r5, {sp, lr}^ + stmia r0, {r2 - r4} + stmdb r0, {sp, lr}^ @ @ Enable the alignment trap while in kernel mode @ - alignment_trap r7, r0, __temp_\sym + alignment_trap r0 @ @ Clear FP to mark the first stack frame @@ -300,7 +339,7 @@ __pabt_svc: .align 5 __dabt_usr: - usr_entry abt + usr_entry @ @ Call the processor-specific abort handler: @@ -329,30 +368,23 @@ __dabt_usr: .align 5 __irq_usr: - usr_entry irq + usr_entry + get_thread_info tsk #ifdef CONFIG_PREEMPT - get_thread_info r8 - ldr r9, [r8, #TI_PREEMPT] @ get preempt count - add r7, r9, #1 @ increment it - str r7, [r8, #TI_PREEMPT] + ldr r8, [tsk, #TI_PREEMPT] @ get preempt count + add r7, r8, #1 @ increment it + str r7, [tsk, #TI_PREEMPT] #endif -1: get_irqnr_and_base r0, r6, r5, lr - movne r1, sp - adrne lr, 1b - @ - @ routine called with r0 = irq number, r1 = struct pt_regs * - @ - bne asm_do_IRQ + + irq_handler #ifdef CONFIG_PREEMPT - ldr r0, [r8, #TI_PREEMPT] + ldr r0, [tsk, #TI_PREEMPT] + str r8, [tsk, #TI_PREEMPT] teq r0, r7 - str r9, [r8, #TI_PREEMPT] strne r0, [r0, -r0] - mov tsk, r8 -#else - get_thread_info tsk #endif + mov why, #0 b ret_to_user @@ -360,7 +392,7 @@ __irq_usr: .align 5 __und_usr: - usr_entry und + usr_entry tst r3, #PSR_T_BIT @ Thumb mode? bne fpundefinstr @ ignore FP @@ -476,7 +508,7 @@ fpundefinstr: .align 5 __pabt_usr: - usr_entry abt + usr_entry enable_irq @ Enable interrupts mov r0, r2 @ address (pc) @@ -616,11 +648,17 @@ __kuser_helper_start: __kuser_cmpxchg: @ 0xffff0fc0 -#if __LINUX_ARM_ARCH__ < 6 +#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) -#ifdef CONFIG_SMP /* sanity check */ -#error "CONFIG_SMP on a machine supporting pre-ARMv6 processors?" -#endif + /* + * Poor you. No fast solution possible... + * The kernel itself must perform the operation. + * A special ghost syscall is used for that (see traps.c). + */ + swi #0x9ffff0 + mov pc, lr + +#elif __LINUX_ARM_ARCH__ < 6 /* * Theory of operation: @@ -735,29 +773,41 @@ __kuser_helper_end: * * Common stub entry macro: * Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC + * + * SP points to a minimal amount of processor-private memory, the address + * of which is copied into r0 for the mode specific abort handler. */ - .macro vector_stub, name, sym, correction=0 + .macro vector_stub, name, correction=0 .align 5 vector_\name: - ldr r13, .LCs\sym .if \correction sub lr, lr, #\correction .endif - str lr, [r13] @ save lr_IRQ + + @ + @ Save r0, lr_<exception> (parent PC) and spsr_<exception> + @ (parent CPSR) + @ + stmia sp, {r0, lr} @ save r0, lr mrs lr, spsr - str lr, [r13, #4] @ save spsr_IRQ + str lr, [sp, #8] @ save spsr + @ - @ now branch to the relevant MODE handling routine + @ Prepare for SVC32 mode. IRQs remain disabled. @ - mrs r13, cpsr - bic r13, r13, #MODE_MASK - orr r13, r13, #SVC_MODE - msr spsr_cxsf, r13 @ switch to SVC_32 mode + mrs r0, cpsr + bic r0, r0, #MODE_MASK + orr r0, r0, #SVC_MODE + msr spsr_cxsf, r0 - and lr, lr, #15 + @ + @ the branch table must immediately follow this code + @ + mov r0, sp + and lr, lr, #0x0f ldr lr, [pc, lr, lsl #2] - movs pc, lr @ Changes mode and branches + movs pc, lr @ branch to handler in SVC mode .endm .globl __stubs_start @@ -765,7 +815,7 @@ __stubs_start: /* * Interrupt dispatcher */ - vector_stub irq, irq, 4 + vector_stub irq, 4 .long __irq_usr @ 0 (USR_26 / USR_32) .long __irq_invalid @ 1 (FIQ_26 / FIQ_32) @@ -788,7 +838,7 @@ __stubs_start: * Data abort dispatcher * Enter in ABT mode, spsr = USR CPSR, lr = USR PC */ - vector_stub dabt, abt, 8 + vector_stub dabt, 8 .long __dabt_usr @ 0 (USR_26 / USR_32) .long __dabt_invalid @ 1 (FIQ_26 / FIQ_32) @@ -811,7 +861,7 @@ __stubs_start: * Prefetch abort dispatcher * Enter in ABT mode, spsr = USR CPSR, lr = USR PC */ - vector_stub pabt, abt, 4 + vector_stub pabt, 4 .long __pabt_usr @ 0 (USR_26 / USR_32) .long __pabt_invalid @ 1 (FIQ_26 / FIQ_32) @@ -834,7 +884,7 @@ __stubs_start: * Undef instr entry dispatcher * Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC */ - vector_stub und, und + vector_stub und .long __und_usr @ 0 (USR_26 / USR_32) .long __und_invalid @ 1 (FIQ_26 / FIQ_32) @@ -888,13 +938,6 @@ vector_addrexcptn: .LCvswi: .word vector_swi -.LCsirq: - .word __temp_irq -.LCsund: - .word __temp_und -.LCsabt: - .word __temp_abt - .globl __stubs_end __stubs_end: @@ -916,23 +959,6 @@ __vectors_end: .data -/* - * Do not reorder these, and do not insert extra data between... - */ - -__temp_irq: - .word 0 @ saved lr_irq - .word 0 @ saved spsr_irq - .word -1 @ old_r0 -__temp_und: - .word 0 @ Saved lr_und - .word 0 @ Saved spsr_und - .word -1 @ old_r0 -__temp_abt: - .word 0 @ Saved lr_abt - .word 0 @ Saved spsr_abt - .word -1 @ old_r0 - .globl cr_alignment .globl cr_no_alignment cr_alignment: diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index a3d40a0e2b0..afef2127396 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -59,11 +59,10 @@ mov \rd, \rd, lsl #13 .endm - .macro alignment_trap, rbase, rtemp, sym + .macro alignment_trap, rtemp #ifdef CONFIG_ALIGNMENT_TRAP -#define OFF_CR_ALIGNMENT(x) cr_alignment - x - - ldr \rtemp, [\rbase, #OFF_CR_ALIGNMENT(\sym)] + ldr \rtemp, .LCcralign + ldr \rtemp, [\rtemp] mcr p15, 0, \rtemp, c1, c0 #endif .endm diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 4733877296d..bd4823c7464 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -2,6 +2,8 @@ * linux/arch/arm/kernel/head.S * * Copyright (C) 1994-2002 Russell King + * Copyright (c) 2003 ARM Limited + * All Rights Reserved * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -165,6 +167,48 @@ __mmap_switched: stmia r6, {r0, r4} @ Save control register values b start_kernel +#if defined(CONFIG_SMP) + .type secondary_startup, #function +ENTRY(secondary_startup) + /* + * Common entry point for secondary CPUs. + * + * Ensure that we're in SVC mode, and IRQs are disabled. Lookup + * the processor type - there is no need to check the machine type + * as it has already been validated by the primary processor. + */ + msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC + bl __lookup_processor_type + movs r10, r5 @ invalid processor? + moveq r0, #'p' @ yes, error 'p' + beq __error + + /* + * Use the page tables supplied from __cpu_up. + */ + adr r4, __secondary_data + ldmia r4, {r5, r6, r13} @ address to jump to after + sub r4, r4, r5 @ mmu has been enabled + ldr r4, [r6, r4] @ get secondary_data.pgdir + adr lr, __enable_mmu @ return address + add pc, r10, #12 @ initialise processor + @ (return control reg) + + /* + * r6 = &secondary_data + */ +ENTRY(__secondary_switched) + ldr sp, [r6, #4] @ get secondary_data.stack + mov fp, #0 + b secondary_start_kernel + + .type __secondary_data, %object +__secondary_data: + .long . + .long secondary_data + .long __secondary_switched +#endif /* defined(CONFIG_SMP) */ + /* diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index c2a7da3ac0f..9fed5fa194d 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -92,6 +92,14 @@ struct cpu_user_fns cpu_user; struct cpu_cache_fns cpu_cache; #endif +struct stack { + u32 irq[3]; + u32 abt[3]; + u32 und[3]; +} ____cacheline_aligned; + +static struct stack stacks[NR_CPUS]; + char elf_platform[ELF_PLATFORM_SIZE]; EXPORT_SYMBOL(elf_platform); @@ -307,8 +315,6 @@ static void __init setup_processor(void) cpu_name, processor_id, (int)processor_id & 15, proc_arch[cpu_architecture()]); - dump_cpu_info(smp_processor_id()); - sprintf(system_utsname.machine, "%s%c", list->arch_name, ENDIANNESS); sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS); elf_hwcap = list->elf_hwcap; @@ -316,6 +322,46 @@ static void __init setup_processor(void) cpu_proc_init(); } +/* + * cpu_init - initialise one CPU. + * + * cpu_init dumps the cache information, initialises SMP specific + * information, and sets up the per-CPU stacks. + */ +void cpu_init(void) +{ + unsigned int cpu = smp_processor_id(); + struct stack *stk = &stacks[cpu]; + + if (cpu >= NR_CPUS) { + printk(KERN_CRIT "CPU%u: bad primary CPU number\n", cpu); + BUG(); + } + + dump_cpu_info(cpu); + + /* + * setup stacks for re-entrant exception handlers + */ + __asm__ ( + "msr cpsr_c, %1\n\t" + "add sp, %0, %2\n\t" + "msr cpsr_c, %3\n\t" + "add sp, %0, %4\n\t" + "msr cpsr_c, %5\n\t" + "add sp, %0, %6\n\t" + "msr cpsr_c, %7" + : + : "r" (stk), + "I" (PSR_F_BIT | PSR_I_BIT | IRQ_MODE), + "I" (offsetof(struct stack, irq[0])), + "I" (PSR_F_BIT | PSR_I_BIT | ABT_MODE), + "I" (offsetof(struct stack, abt[0])), + "I" (PSR_F_BIT | PSR_I_BIT | UND_MODE), + "I" (offsetof(struct stack, und[0])), + "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE)); +} + static struct machine_desc * __init setup_machine(unsigned int nr) { struct machine_desc *list; @@ -715,6 +761,8 @@ void __init setup_arch(char **cmdline_p) paging_init(&meminfo, mdesc); request_standard_resources(&meminfo, mdesc); + cpu_init(); + /* * Set up various architecture-specific pointers */ diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index ecc8c333240..34892758f09 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -24,6 +24,9 @@ #include <asm/atomic.h> #include <asm/cacheflush.h> #include <asm/cpu.h> +#include <asm/mmu_context.h> +#include <asm/pgtable.h> +#include <asm/pgalloc.h> #include <asm/processor.h> #include <asm/tlbflush.h> #include <asm/ptrace.h> @@ -37,6 +40,13 @@ cpumask_t cpu_present_mask; cpumask_t cpu_online_map; /* + * as from 2.5, kernels no longer have an init_tasks structure + * so we need some other way of telling a new secondary core + * where to place its SVC stack + */ +struct secondary_data secondary_data; + +/* * structures for inter-processor calls * - A collection of single bit ipi messages. */ @@ -71,6 +81,8 @@ static DEFINE_SPINLOCK(smp_call_function_lock); int __init __cpu_up(unsigned int cpu) { struct task_struct *idle; + pgd_t *pgd; + pmd_t *pmd; int ret; /* @@ -84,11 +96,57 @@ int __init __cpu_up(unsigned int cpu) } /* + * Allocate initial page tables to allow the new CPU to + * enable the MMU safely. This essentially means a set + * of our "standard" page tables, with the addition of + * a 1:1 mapping for the physical address of the kernel. + */ + pgd = pgd_alloc(&init_mm); + pmd = pmd_offset(pgd, PHYS_OFFSET); + *pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) | + PMD_TYPE_SECT | PMD_SECT_AP_WRITE); + + /* + * We need to tell the secondary core where to find + * its stack and the page tables. + */ + secondary_data.stack = (void *)idle->thread_info + THREAD_SIZE - 8; + secondary_data.pgdir = virt_to_phys(pgd); + wmb(); + + /* * Now bring the CPU into our world. */ ret = boot_secondary(cpu, idle); + if (ret == 0) { + unsigned long timeout; + + /* + * CPU was successfully started, wait for it + * to come online or time out. + */ + timeout = jiffies + HZ; + while (time_before(jiffies, timeout)) { + if (cpu_online(cpu)) + break; + + udelay(10); + barrier(); + } + + if (!cpu_online(cpu)) + ret = -EIO; + } + + secondary_data.stack = 0; + secondary_data.pgdir = 0; + + *pmd_offset(pgd, PHYS_OFFSET) = __pmd(0); + pgd_free(pgd); + if (ret) { - printk(KERN_CRIT "cpu_up: processor %d failed to boot\n", cpu); + printk(KERN_CRIT "CPU%u: processor failed to boot\n", cpu); + /* * FIXME: We need to clean up the new idle thread. --rmk */ @@ -98,6 +156,56 @@ int __init __cpu_up(unsigned int cpu) } /* + * This is the secondary CPU boot entry. We're using this CPUs + * idle thread stack, but a set of temporary page tables. + */ +asmlinkage void __init secondary_start_kernel(void) +{ + struct mm_struct *mm = &init_mm; + unsigned int cpu = smp_processor_id(); + + printk("CPU%u: Booted secondary processor\n", cpu); + + /* + * All kernel threads share the same mm context; grab a + * reference and switch to it. + */ + atomic_inc(&mm->mm_users); + atomic_inc(&mm->mm_count); + current->active_mm = mm; + cpu_set(cpu, mm->cpu_vm_mask); + cpu_switch_mm(mm->pgd, mm); + enter_lazy_tlb(mm, current); + + cpu_init(); + + /* + * Give the platform a chance to do its own initialisation. + */ + platform_secondary_init(cpu); + + /* + * Enable local interrupts. + */ + local_irq_enable(); + local_fiq_enable(); + + calibrate_delay(); + + smp_store_cpu_info(cpu); + + /* + * OK, now it's safe to let the boot CPU continue + */ + cpu_set(cpu, cpu_online_map); + + /* + * OK, it's off to the idle thread for us + */ + cpu_idle(); +} + +/* * Called by both boot and secondaries to move global data into * per-processor storage. */ diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 14df16b983f..45d2a032d89 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -464,6 +464,55 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) #endif return 0; +#ifdef CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG + /* + * Atomically store r1 in *r2 if *r2 is equal to r0 for user space. + * Return zero in r0 if *MEM was changed or non-zero if no exchange + * happened. Also set the user C flag accordingly. + * If access permissions have to be fixed up then non-zero is + * returned and the operation has to be re-attempted. + * + * *NOTE*: This is a ghost syscall private to the kernel. Only the + * __kuser_cmpxchg code in entry-armv.S should be aware of its + * existence. Don't ever use this from user code. + */ + case 0xfff0: + { + extern void do_DataAbort(unsigned long addr, unsigned int fsr, + struct pt_regs *regs); + unsigned long val; + unsigned long addr = regs->ARM_r2; + struct mm_struct *mm = current->mm; + pgd_t *pgd; pmd_t *pmd; pte_t *pte; + + regs->ARM_cpsr &= ~PSR_C_BIT; + spin_lock(&mm->page_table_lock); + pgd = pgd_offset(mm, addr); + if (!pgd_present(*pgd)) + goto bad_access; + pmd = pmd_offset(pgd, addr); + if (!pmd_present(*pmd)) + goto bad_access; + pte = pte_offset_map(pmd, addr); + if (!pte_present(*pte) || !pte_write(*pte)) + goto bad_access; + val = *(unsigned long *)addr; + val -= regs->ARM_r0; + if (val == 0) { + *(unsigned long *)addr = regs->ARM_r1; + regs->ARM_cpsr |= PSR_C_BIT; + } + spin_unlock(&mm->page_table_lock); + return val; + + bad_access: + spin_unlock(&mm->page_table_lock); + /* simulate a read access fault */ + do_DataAbort(addr, 15 + (1 << 11), regs); + return -1; + } +#endif + default: /* Calls 9f00xx..9f07ff are defined to return -ENOSYS if not implemented, rather than raising SIGILL. This diff --git a/arch/arm/lib/ashldi3.c b/arch/arm/lib/ashldi3.c index 130f5a83966..b62875cfd8f 100644 --- a/arch/arm/lib/ashldi3.c +++ b/arch/arm/lib/ashldi3.c @@ -31,31 +31,26 @@ Boston, MA 02111-1307, USA. */ #include "gcclib.h" -DItype -__ashldi3 (DItype u, word_type b) +s64 __ashldi3(s64 u, int b) { - DIunion w; - word_type bm; - DIunion uu; - - if (b == 0) - return u; - - uu.ll = u; - - bm = (sizeof (SItype) * BITS_PER_UNIT) - b; - if (bm <= 0) - { - w.s.low = 0; - w.s.high = (USItype)uu.s.low << -bm; - } - else - { - USItype carries = (USItype)uu.s.low >> bm; - w.s.low = (USItype)uu.s.low << b; - w.s.high = ((USItype)uu.s.high << b) | carries; - } - - return w.ll; + DIunion w; + int bm; + DIunion uu; + + if (b == 0) + return u; + + uu.ll = u; + + bm = (sizeof(s32) * BITS_PER_UNIT) - b; + if (bm <= 0) { + w.s.low = 0; + w.s.high = (u32) uu.s.low << -bm; + } else { + u32 carries = (u32) uu.s.low >> bm; + w.s.low = (u32) uu.s.low << b; + w.s.high = ((u32) uu.s.high << b) | carries; + } + + return w.ll; } - diff --git a/arch/arm/lib/ashrdi3.c b/arch/arm/lib/ashrdi3.c index 71625d218f8..9a8600a7543 100644 --- a/arch/arm/lib/ashrdi3.c +++ b/arch/arm/lib/ashrdi3.c @@ -31,31 +31,27 @@ Boston, MA 02111-1307, USA. */ #include "gcclib.h" -DItype -__ashrdi3 (DItype u, word_type b) +s64 __ashrdi3(s64 u, int b) { - DIunion w; - word_type bm; - DIunion uu; - - if (b == 0) - return u; - - uu.ll = u; - - bm = (sizeof (SItype) * BITS_PER_UNIT) - b; - if (bm <= 0) - { - /* w.s.high = 1..1 or 0..0 */ - w.s.high = uu.s.high >> (sizeof (SItype) * BITS_PER_UNIT - 1); - w.s.low = uu.s.high >> -bm; - } - else - { - USItype carries = (USItype)uu.s.high << bm; - w.s.high = uu.s.high >> b; - w.s.low = ((USItype)uu.s.low >> b) | carries; - } - - return w.ll; + DIunion w; + int bm; + DIunion uu; + + if (b == 0) + return u; + + uu.ll = u; + + bm = (sizeof(s32) * BITS_PER_UNIT) - b; + if (bm <= 0) { + /* w.s.high = 1..1 or 0..0 */ + w.s.high = uu.s.high >> (sizeof(s32) * BITS_PER_UNIT - 1); + w.s.low = uu.s.high >> -bm; + } else { + u32 carries = (u32) uu.s.high << bm; + w.s.high = uu.s.high >> b; + w.s.low = ((u32) uu.s.low >> b) | carries; + } + + return w.ll; } diff --git a/arch/arm/lib/gcclib.h b/arch/arm/lib/gcclib.h index 65314a3d9e2..8b6dcc656de 100644 --- a/arch/arm/lib/gcclib.h +++ b/arch/arm/lib/gcclib.h @@ -1,25 +1,22 @@ /* gcclib.h -- definitions for various functions 'borrowed' from gcc-2.95.3 */ /* I Molton 29/07/01 */ -#define BITS_PER_UNIT 8 -#define SI_TYPE_SIZE (sizeof (SItype) * BITS_PER_UNIT) +#include <linux/types.h> -typedef unsigned int UQItype __attribute__ ((mode (QI))); -typedef int SItype __attribute__ ((mode (SI))); -typedef unsigned int USItype __attribute__ ((mode (SI))); -typedef int DItype __attribute__ ((mode (DI))); -typedef int word_type __attribute__ ((mode (__word__))); -typedef unsigned int UDItype __attribute__ ((mode (DI))); +#define BITS_PER_UNIT 8 +#define SI_TYPE_SIZE (sizeof(s32) * BITS_PER_UNIT) #ifdef __ARMEB__ - struct DIstruct {SItype high, low;}; +struct DIstruct { + s32 high, low; +}; #else - struct DIstruct {SItype low, high;}; +struct DIstruct { + s32 low, high; +}; #endif -typedef union -{ - struct DIstruct s; - DItype ll; +typedef union { + struct DIstruct s; + s64 ll; } DIunion; - diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S index 6d1d7c27806..5e240e452af 100644 --- a/arch/arm/lib/io-writesw-armv4.S +++ b/arch/arm/lib/io-writesw-armv4.S @@ -87,9 +87,9 @@ ENTRY(__raw_writesw) subs r2, r2, #2 orr ip, ip, r3, push_hbyte1 strh ip, [r0] - bpl 2b + bpl 1b -3: tst r2, #1 -2: movne ip, r3, lsr #8 + tst r2, #1 +3: movne ip, r3, lsr #8 strneh ip, [r0] mov pc, lr diff --git a/arch/arm/lib/longlong.h b/arch/arm/lib/longlong.h index 179eea4edc3..90ae647e4d7 100644 --- a/arch/arm/lib/longlong.h +++ b/arch/arm/lib/longlong.h @@ -26,18 +26,18 @@ #define __BITS4 (SI_TYPE_SIZE / 4) #define __ll_B (1L << (SI_TYPE_SIZE / 2)) -#define __ll_lowpart(t) ((USItype) (t) % __ll_B) -#define __ll_highpart(t) ((USItype) (t) / __ll_B) +#define __ll_lowpart(t) ((u32) (t) % __ll_B) +#define __ll_highpart(t) ((u32) (t) / __ll_B) /* Define auxiliary asm macros. 1) umul_ppmm(high_prod, low_prod, multipler, multiplicand) - multiplies two USItype integers MULTIPLER and MULTIPLICAND, - and generates a two-part USItype product in HIGH_PROD and + multiplies two u32 integers MULTIPLER and MULTIPLICAND, + and generates a two-part u32 product in HIGH_PROD and LOW_PROD. - 2) __umulsidi3(a,b) multiplies two USItype integers A and B, - and returns a UDItype product. This is just a variant of umul_ppmm. + 2) __umulsidi3(a,b) multiplies two u32 integers A and B, + and returns a u64 product. This is just a variant of umul_ppmm. 3) udiv_qrnnd(quotient, remainder, high_numerator, low_numerator, denominator) divides a two-word unsigned integer, composed by the @@ -77,23 +77,23 @@ #define add_ssaaaa(sh, sl, ah, al, bh, bl) \ __asm__ ("adds %1, %4, %5 \n\ adc %0, %2, %3" \ - : "=r" ((USItype) (sh)), \ - "=&r" ((USItype) (sl)) \ - : "%r" ((USItype) (ah)), \ - "rI" ((USItype) (bh)), \ - "%r" ((USItype) (al)), \ - "rI" ((USItype) (bl))) + : "=r" ((u32) (sh)), \ + "=&r" ((u32) (sl)) \ + : "%r" ((u32) (ah)), \ + "rI" ((u32) (bh)), \ + "%r" ((u32) (al)), \ + "rI" ((u32) (bl))) #define sub_ddmmss(sh, sl, ah, al, bh, bl) \ __asm__ ("subs %1, %4, %5 \n\ sbc %0, %2, %3" \ - : "=r" ((USItype) (sh)), \ - "=&r" ((USItype) (sl)) \ - : "r" ((USItype) (ah)), \ - "rI" ((USItype) (bh)), \ - "r" ((USItype) (al)), \ - "rI" ((USItype) (bl))) + : "=r" ((u32) (sh)), \ + "=&r" ((u32) (sl)) \ + : "r" ((u32) (ah)), \ + "rI" ((u32) (bh)), \ + "r" ((u32) (al)), \ + "rI" ((u32) (bl))) #define umul_ppmm(xh, xl, a, b) \ -{register USItype __t0, __t1, __t2; \ +{register u32 __t0, __t1, __t2; \ __asm__ ("%@ Inlined umul_ppmm \n\ mov %2, %5, lsr #16 \n\ mov %0, %6, lsr #16 \n\ @@ -107,14 +107,14 @@ addcs %0, %0, #65536 \n\ adds %1, %1, %3, lsl #16 \n\ adc %0, %0, %3, lsr #16" \ - : "=&r" ((USItype) (xh)), \ - "=r" ((USItype) (xl)), \ + : "=&r" ((u32) (xh)), \ + "=r" ((u32) (xl)), \ "=&r" (__t0), "=&r" (__t1), "=r" (__t2) \ - : "r" ((USItype) (a)), \ - "r" ((USItype) (b)));} + : "r" ((u32) (a)), \ + "r" ((u32) (b)));} #define UMUL_TIME 20 #define UDIV_TIME 100 -#endif /* __arm__ */ +#endif /* __arm__ */ #define __umulsidi3(u, v) \ ({DIunion __w; \ @@ -123,14 +123,14 @@ #define __udiv_qrnnd_c(q, r, n1, n0, d) \ do { \ - USItype __d1, __d0, __q1, __q0; \ - USItype __r1, __r0, __m; \ + u32 __d1, __d0, __q1, __q0; \ + u32 __r1, __r0, __m; \ __d1 = __ll_highpart (d); \ __d0 = __ll_lowpart (d); \ \ __r1 = (n1) % __d1; \ __q1 = (n1) / __d1; \ - __m = (USItype) __q1 * __d0; \ + __m = (u32) __q1 * __d0; \ __r1 = __r1 * __ll_B | __ll_highpart (n0); \ if (__r1 < __m) \ { \ @@ -143,7 +143,7 @@ \ __r0 = __r1 % __d1; \ __q0 = __r1 / __d1; \ - __m = (USItype) __q0 * __d0; \ + __m = (u32) __q0 * __d0; \ __r0 = __r0 * __ll_B | __ll_lowpart (n0); \ if (__r0 < __m) \ { \ @@ -154,7 +154,7 @@ } \ __r0 -= __m; \ \ - (q) = (USItype) __q1 * __ll_B | __q0; \ + (q) = (u32) __q1 * __ll_B | __q0; \ (r) = __r0; \ } while (0) @@ -163,14 +163,14 @@ #define count_leading_zeros(count, x) \ do { \ - USItype __xr = (x); \ - USItype __a; \ + u32 __xr = (x); \ + u32 __a; \ \ if (SI_TYPE_SIZE <= 32) \ { \ - __a = __xr < ((USItype)1<<2*__BITS4) \ - ? (__xr < ((USItype)1<<__BITS4) ? 0 : __BITS4) \ - : (__xr < ((USItype)1<<3*__BITS4) ? 2*__BITS4 : 3*__BITS4); \ + __a = __xr < ((u32)1<<2*__BITS4) \ + ? (__xr < ((u32)1<<__BITS4) ? 0 : __BITS4) \ + : (__xr < ((u32)1<<3*__BITS4) ? 2*__BITS4 : 3*__BITS4); \ } \ else \ { \ diff --git a/arch/arm/lib/lshrdi3.c b/arch/arm/lib/lshrdi3.c index b666f1bad45..3681f49d2b6 100644 --- a/arch/arm/lib/lshrdi3.c +++ b/arch/arm/lib/lshrdi3.c @@ -31,31 +31,26 @@ Boston, MA 02111-1307, USA. */ #include "gcclib.h" -DItype -__lshrdi3 (DItype u, word_type b) +s64 __lshrdi3(s64 u, int b) { - DIunion w; - word_type bm; - DIunion uu; - - if (b == 0) - return u; - - uu.ll = u; - - bm = (sizeof (SItype) * BITS_PER_UNIT) - b; - if (bm <= 0) - { - w.s.high = 0; - w.s.low = (USItype)uu.s.high >> -bm; - } - else - { - USItype carries = (USItype)uu.s.high << bm; - w.s.high = (USItype)uu.s.high >> b; - w.s.low = ((USItype)uu.s.low >> b) | carries; - } - - return w.ll; + DIunion w; + int bm; + DIunion uu; + + if (b == 0) + return u; + + uu.ll = u; + + bm = (sizeof(s32) * BITS_PER_UNIT) - b; + if (bm <= 0) { + w.s.high = 0; + w.s.low = (u32) uu.s.high >> -bm; + } else { + u32 carries = (u32) uu.s.high << bm; + w.s.high = (u32) uu.s.high >> b; + w.s.low = ((u32) uu.s.low >> b) | carries; + } + + return w.ll; } - diff --git a/arch/arm/lib/muldi3.c b/arch/arm/lib/muldi3.c index 44d611b1cfd..0a3b93313f1 100644 --- a/arch/arm/lib/muldi3.c +++ b/arch/arm/lib/muldi3.c @@ -32,7 +32,7 @@ Boston, MA 02111-1307, USA. */ #include "gcclib.h" #define umul_ppmm(xh, xl, a, b) \ -{register USItype __t0, __t1, __t2; \ +{register u32 __t0, __t1, __t2; \ __asm__ ("%@ Inlined umul_ppmm \n\ mov %2, %5, lsr #16 \n\ mov %0, %6, lsr #16 \n\ @@ -46,32 +46,27 @@ Boston, MA 02111-1307, USA. */ addcs %0, %0, #65536 \n\ adds %1, %1, %3, lsl #16 \n\ adc %0, %0, %3, lsr #16" \ - : "=&r" ((USItype) (xh)), \ - "=r" ((USItype) (xl)), \ + : "=&r" ((u32) (xh)), \ + "=r" ((u32) (xl)), \ "=&r" (__t0), "=&r" (__t1), "=r" (__t2) \ - : "r" ((USItype) (a)), \ - "r" ((USItype) (b)));} - + : "r" ((u32) (a)), \ + "r" ((u32) (b)));} #define __umulsidi3(u, v) \ ({DIunion __w; \ umul_ppmm (__w.s.high, __w.s.low, u, v); \ __w.ll; }) - -DItype -__muldi3 (DItype u, DItype v) +s64 __muldi3(s64 u, s64 v) { - DIunion w; - DIunion uu, vv; + DIunion w; + DIunion uu, vv; - uu.ll = u, - vv.ll = v; + uu.ll = u, vv.ll = v; - w.ll = __umulsidi3 (uu.s.low, vv.s.low); - w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high - + (USItype) uu.s.high * (USItype) vv.s.low); + w.ll = __umulsidi3(uu.s.low, vv.s.low); + w.s.high += ((u32) uu.s.low * (u32) vv.s.high + + (u32) uu.s.high * (u32) vv.s.low); - return w.ll; + return w.ll; } - diff --git a/arch/arm/lib/ucmpdi2.c b/arch/arm/lib/ucmpdi2.c index 6c6ae63efa0..57f3f2df385 100644 --- a/arch/arm/lib/ucmpdi2.c +++ b/arch/arm/lib/ucmpdi2.c @@ -31,21 +31,19 @@ Boston, MA 02111-1307, USA. */ #include "gcclib.h" -word_type -__ucmpdi2 (DItype a, DItype b) +int __ucmpdi2(s64 a, s64 b) { - DIunion au, bu; - - au.ll = a, bu.ll = b; - - if ((USItype) au.s.high < (USItype) bu.s.high) - return 0; - else if ((USItype) au.s.high > (USItype) bu.s.high) - return 2; - if ((USItype) au.s.low < (USItype) bu.s.low) - return 0; - else if ((USItype) au.s.low > (USItype) bu.s.low) - return 2; - return 1; + DIunion au, bu; + + au.ll = a, bu.ll = b; + + if ((u32) au.s.high < (u32) bu.s.high) + return 0; + else if ((u32) au.s.high > (u32) bu.s.high) + return 2; + if ((u32) au.s.low < (u32) bu.s.low) + return 0; + else if ((u32) au.s.low > (u32) bu.s.low) + return 2; + return 1; } - diff --git a/arch/arm/lib/udivdi3.c b/arch/arm/lib/udivdi3.c index d25195f673f..e343be4c664 100644 --- a/arch/arm/lib/udivdi3.c +++ b/arch/arm/lib/udivdi3.c @@ -32,211 +32,191 @@ Boston, MA 02111-1307, USA. */ #include "gcclib.h" #include "longlong.h" -static const UQItype __clz_tab[] = -{ - 0,1,2,2,3,3,3,3,4,4,4,4,4,4,4,4,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5, - 6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6, - 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7, - 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7, - 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, - 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, - 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, - 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, +static const u8 __clz_tab[] = { + 0, 1, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 4, 4, 4, 4, 5, 5, 5, 5, 5, 5, 5, 5, + 5, 5, 5, 5, 5, 5, 5, 5, + 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, + 6, 6, 6, 6, 6, 6, 6, 6, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, + 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, + 8, 8, 8, 8, 8, 8, 8, 8, + 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, + 8, 8, 8, 8, 8, 8, 8, 8, + 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, + 8, 8, 8, 8, 8, 8, 8, 8, + 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, + 8, 8, 8, 8, 8, 8, 8, 8, }; -UDItype -__udivmoddi4 (UDItype n, UDItype d, UDItype *rp) +u64 __udivmoddi4(u64 n, u64 d, u64 * rp) { - DIunion ww; - DIunion nn, dd; - DIunion rr; - USItype d0, d1, n0, n1, n2; - USItype q0, q1; - USItype b, bm; - - nn.ll = n; - dd.ll = d; - - d0 = dd.s.low; - d1 = dd.s.high; - n0 = nn.s.low; - n1 = nn.s.high; - - if (d1 == 0) - { - if (d0 > n1) - { - /* 0q = nn / 0D */ - - count_leading_zeros (bm, d0); - - if (bm != 0) - { - /* Normalize, i.e. make the most significant bit of the - denominator set. */ - - d0 = d0 << bm; - n1 = (n1 << bm) | (n0 >> (SI_TYPE_SIZE - bm)); - n0 = n0 << bm; - } - - udiv_qrnnd (q0, n0, n1, n0, d0); - q1 = 0; - - /* Remainder in n0 >> bm. */ - } - else - { - /* qq = NN / 0d */ - - if (d0 == 0) - d0 = 1 / d0; /* Divide intentionally by zero. */ - - count_leading_zeros (bm, d0); - - if (bm == 0) - { - /* From (n1 >= d0) /\ (the most significant bit of d0 is set), - conclude (the most significant bit of n1 is set) /\ (the - leading quotient digit q1 = 1). - - This special case is necessary, not an optimization. - (Shifts counts of SI_TYPE_SIZE are undefined.) */ - - n1 -= d0; - q1 = 1; - } - else - { - /* Normalize. */ - - b = SI_TYPE_SIZE - bm; - - d0 = d0 << bm; - n2 = n1 >> b; - n1 = (n1 << bm) | (n0 >> b); - n0 = n0 << bm; - - udiv_qrnnd (q1, n1, n2, n1, d0); - } - - /* n1 != d0... */ - - udiv_qrnnd (q0, n0, n1, n0, d0); - - /* Remainder in n0 >> bm. */ - } - - if (rp != 0) - { - rr.s.low = n0 >> bm; - rr.s.high = 0; - *rp = rr.ll; - } - } - else - { - if (d1 > n1) - { - /* 00 = nn / DD */ - - q0 = 0; - q1 = 0; - - /* Remainder in n1n0. */ - if (rp != 0) - { - rr.s.low = n0; - rr.s.high = n1; - *rp = rr.ll; - } - } - else - { - /* 0q = NN / dd */ - - count_leading_zeros (bm, d1); - if (bm == 0) - { - /* From (n1 >= d1) /\ (the most significant bit of d1 is set), - conclude (the most significant bit of n1 is set) /\ (the - quotient digit q0 = 0 or 1). - - This special case is necessary, not an optimization. */ - - /* The condition on the next line takes advantage of that - n1 >= d1 (true due to program flow). */ - if (n1 > d1 || n0 >= d0) - { - q0 = 1; - sub_ddmmss (n1, n0, n1, n0, d1, d0); - } - else - q0 = 0; - - q1 = 0; - - if (rp != 0) - { - rr.s.low = n0; - rr.s.high = n1; - *rp = rr.ll; - } - } - else - { - USItype m1, m0; - /* Normalize. */ - - b = SI_TYPE_SIZE - bm; - - d1 = (d1 << bm) | (d0 >> b); - d0 = d0 << bm; - n2 = n1 >> b; - n1 = (n1 << bm) | (n0 >> b); - n0 = n0 << bm; - - udiv_qrnnd (q0, n1, n2, n1, d1); - umul_ppmm (m1, m0, q0, d0); - - if (m1 > n1 || (m1 == n1 && m0 > n0)) - { - q0--; - sub_ddmmss (m1, m0, m1, m0, d1, d0); - } - - q1 = 0; - - /* Remainder in (n1n0 - m1m0) >> bm. */ - if (rp != 0) - { - sub_ddmmss (n1, n0, n1, n0, m1, m0); - rr.s.low = (n1 << b) | (n0 >> bm); - rr.s.high = n1 >> bm; - *rp = rr.ll; - } - } - } - } - - ww.s.low = q0; - ww.s.high = q1; - return ww.ll; + DIunion ww; + DIunion nn, dd; + DIunion rr; + u32 d0, d1, n0, n1, n2; + u32 q0, q1; + u32 b, bm; + + nn.ll = n; + dd.ll = d; + + d0 = dd.s.low; + d1 = dd.s.high; + n0 = nn.s.low; + n1 = nn.s.high; + + if (d1 == 0) { + if (d0 > n1) { + /* 0q = nn / 0D */ + + count_leading_zeros(bm, d0); + + if (bm != 0) { + /* Normalize, i.e. make the most significant bit of the + denominator set. */ + + d0 = d0 << bm; + n1 = (n1 << bm) | (n0 >> (SI_TYPE_SIZE - bm)); + n0 = n0 << bm; + } + + udiv_qrnnd(q0, n0, n1, n0, d0); + q1 = 0; + + /* Remainder in n0 >> bm. */ + } else { + /* qq = NN / 0d */ + + if (d0 == 0) + d0 = 1 / d0; /* Divide intentionally by zero. */ + + count_leading_zeros(bm, d0); + + if (bm == 0) { + /* From (n1 >= d0) /\ (the most significant bit of d0 is set), + conclude (the most significant bit of n1 is set) /\ (the + leading quotient digit q1 = 1). + + This special case is necessary, not an optimization. + (Shifts counts of SI_TYPE_SIZE are undefined.) */ + + n1 -= d0; + q1 = 1; + } else { + /* Normalize. */ + + b = SI_TYPE_SIZE - bm; + + d0 = d0 << bm; + n2 = n1 >> b; + n1 = (n1 << bm) | (n0 >> b); + n0 = n0 << bm; + + udiv_qrnnd(q1, n1, n2, n1, d0); + } + + /* n1 != d0... */ + + udiv_qrnnd(q0, n0, n1, n0, d0); + + /* Remainder in n0 >> bm. */ + } + + if (rp != 0) { + rr.s.low = n0 >> bm; + rr.s.high = 0; + *rp = rr.ll; + } + } else { + if (d1 > n1) { + /* 00 = nn / DD */ + + q0 = 0; + q1 = 0; + + /* Remainder in n1n0. */ + if (rp != 0) { + rr.s.low = n0; + rr.s.high = n1; + *rp = rr.ll; + } + } else { + /* 0q = NN / dd */ + + count_leading_zeros(bm, d1); + if (bm == 0) { + /* From (n1 >= d1) /\ (the most significant bit of d1 is set), + conclude (the most significant bit of n1 is set) /\ (the + quotient digit q0 = 0 or 1). + + This special case is necessary, not an optimization. */ + + /* The condition on the next line takes advantage of that + n1 >= d1 (true due to program flow). */ + if (n1 > d1 || n0 >= d0) { + q0 = 1; + sub_ddmmss(n1, n0, n1, n0, d1, d0); + } else + q0 = 0; + + q1 = 0; + + if (rp != 0) { + rr.s.low = n0; + rr.s.high = n1; + *rp = rr.ll; + } + } else { + u32 m1, m0; + /* Normalize. */ + + b = SI_TYPE_SIZE - bm; + + d1 = (d1 << bm) | (d0 >> b); + d0 = d0 << bm; + n2 = n1 >> b; + n1 = (n1 << bm) | (n0 >> b); + n0 = n0 << bm; + + udiv_qrnnd(q0, n1, n2, n1, d1); + umul_ppmm(m1, m0, q0, d0); + + if (m1 > n1 || (m1 == n1 && m0 > n0)) { + q0--; + sub_ddmmss(m1, m0, m1, m0, d1, d0); + } + + q1 = 0; + + /* Remainder in (n1n0 - m1m0) >> bm. */ + if (rp != 0) { + sub_ddmmss(n1, n0, n1, n0, m1, m0); + rr.s.low = (n1 << b) | (n0 >> bm); + rr.s.high = n1 >> bm; + *rp = rr.ll; + } + } + } + } + + ww.s.low = q0; + ww.s.high = q1; + return ww.ll; } -UDItype -__udivdi3 (UDItype n, UDItype d) +u64 __udivdi3(u64 n, u64 d) { - return __udivmoddi4 (n, d, (UDItype *) 0); + return __udivmoddi4(n, d, (u64 *) 0); } -UDItype -__umoddi3 (UDItype u, UDItype v) +u64 __umoddi3(u64 u, u64 v) { - UDItype w; + u64 w; - (void) __udivmoddi4 (u ,v, &w); + (void)__udivmoddi4(u, v, &w); - return w; + return w; } - diff --git a/arch/arm/mach-aaec2000/Kconfig b/arch/arm/mach-aaec2000/Kconfig new file mode 100644 index 00000000000..5e4bef93754 --- /dev/null +++ b/arch/arm/mach-aaec2000/Kconfig @@ -0,0 +1,11 @@ +if ARCH_AAEC2000 + +menu "Agilent AAEC-2000 Implementations" + +config MACH_AAED2000 + bool "Agilent AAED-2000 Development Platform" + select CPU_ARM920T + +endmenu + +endif diff --git a/arch/arm/mach-aaec2000/Makefile b/arch/arm/mach-aaec2000/Makefile new file mode 100644 index 00000000000..20ec83896c3 --- /dev/null +++ b/arch/arm/mach-aaec2000/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for the linux kernel. +# + +# Common support (must be linked before board specific support) +obj-y += core.o + +# Specific board support +obj-$(CONFIG_MACH_AAED2000) += aaed2000.o diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c new file mode 100644 index 00000000000..5417ca3f462 --- /dev/null +++ b/arch/arm/mach-aaec2000/aaed2000.c @@ -0,0 +1,48 @@ +/* + * linux/arch/arm/mach-aaec2000/aaed2000.c + * + * Support for the Agilent AAED-2000 Development Platform. + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/major.h> +#include <linux/interrupt.h> + +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/mach-types.h> +#include <asm/hardware.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include "core.h" + +static void __init aaed2000_init_irq(void) +{ + aaec2000_init_irq(); +} + +static void __init aaed2000_map_io(void) +{ + aaec2000_map_io(); +} + +MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform") + MAINTAINER("Nicolas Bellido Y Ortega") + BOOT_MEM(0xf0000000, PIO_BASE, VIO_BASE) + MAPIO(aaed2000_map_io) + INITIRQ(aaed2000_init_irq) + .timer = &aaec2000_timer, +MACHINE_END diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c new file mode 100644 index 00000000000..fc145b3768f --- /dev/null +++ b/arch/arm/mach-aaec2000/core.c @@ -0,0 +1,157 @@ +/* + * linux/arch/arm/mach-aaec2000/core.c + * + * Code common to all AAEC-2000 machines + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/timex.h> +#include <linux/signal.h> + +#include <asm/hardware.h> +#include <asm/irq.h> + +#include <asm/mach/irq.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> + +/* + * Common I/O mapping: + * + * Static virtual address mappings are as follow: + * + * 0xf8000000-0xf8001ffff: Devices connected to APB bus + * 0xf8002000-0xf8003ffff: Devices connected to AHB bus + * + * Below 0xe8000000 is reserved for vm allocation. + * + * The machine specific code must provide the extra mapping beside the + * default mapping provided here. + */ +static struct map_desc standard_io_desc[] __initdata = { + /* virtual physical length type */ + { VIO_APB_BASE, PIO_APB_BASE, IO_APB_LENGTH, MT_DEVICE }, + { VIO_AHB_BASE, PIO_AHB_BASE, IO_AHB_LENGTH, MT_DEVICE } +}; + +void __init aaec2000_map_io(void) +{ + iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); +} + +/* + * Interrupt handling routines + */ +static void aaec2000_int_ack(unsigned int irq) +{ + IRQ_INTSR = 1 << irq; +} + +static void aaec2000_int_mask(unsigned int irq) +{ + IRQ_INTENC |= (1 << irq); +} + +static void aaec2000_int_unmask(unsigned int irq) +{ + IRQ_INTENS |= (1 << irq); +} + +static struct irqchip aaec2000_irq_chip = { + .ack = aaec2000_int_ack, + .mask = aaec2000_int_mask, + .unmask = aaec2000_int_unmask, +}; + +void __init aaec2000_init_irq(void) +{ + unsigned int i; + + for (i = 0; i < NR_IRQS; i++) { + set_irq_handler(i, do_level_IRQ); + set_irq_chip(i, &aaec2000_irq_chip); + set_irq_flags(i, IRQF_VALID); + } + + /* Disable all interrupts */ + IRQ_INTENC = 0xffffffff; + + /* Clear any pending interrupts */ + IRQ_INTSR = IRQ_INTSR; +} + +/* + * Time keeping + */ +/* IRQs are disabled before entering here from do_gettimeofday() */ +static unsigned long aaec2000_gettimeoffset(void) +{ + unsigned long ticks_to_match, elapsed, usec; + + /* Get ticks before next timer match */ + ticks_to_match = TIMER1_LOAD - TIMER1_VAL; + + /* We need elapsed ticks since last match */ + elapsed = LATCH - ticks_to_match; + + /* Now, convert them to usec */ + usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH; + + return usec; +} + +/* We enter here with IRQs enabled */ +static irqreturn_t +aaec2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + /* TODO: Check timer accuracy */ + write_seqlock(&xtime_lock); + + timer_tick(regs); + TIMER1_CLEAR = 1; + + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static struct irqaction aaec2000_timer_irq = { + .name = "AAEC-2000 Timer Tick", + .flags = SA_INTERRUPT, + .handler = aaec2000_timer_interrupt +}; + +static void __init aaec2000_timer_init(void) +{ + /* Disable timer 1 */ + TIMER1_CTRL = 0; + + /* We have somehow to generate a 100Hz clock. + * We then use the 508KHz timer in periodic mode. + */ + TIMER1_LOAD = LATCH; + TIMER1_CLEAR = 1; /* Clear interrupt */ + + setup_irq(INT_TMR1_OFL, &aaec2000_timer_irq); + + TIMER1_CTRL = TIMER_CTRL_ENABLE | + TIMER_CTRL_PERIODIC | + TIMER_CTRL_CLKSEL_508K; +} + +struct sys_timer aaec2000_timer = { + .init = aaec2000_timer_init, + .offset = aaec2000_gettimeoffset, +}; + diff --git a/arch/arm/mach-aaec2000/core.h b/arch/arm/mach-aaec2000/core.h new file mode 100644 index 00000000000..91893d848c1 --- /dev/null +++ b/arch/arm/mach-aaec2000/core.h @@ -0,0 +1,16 @@ +/* + * linux/arch/arm/mach-aaec2000/core.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +struct sys_timer; + +extern struct sys_timer aaec2000_timer; +extern void __init aaec2000_map_io(void); +extern void __init aaec2000_init_irq(void); diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile index 158daaf9e3b..ebb255bdce8 100644 --- a/arch/arm/mach-integrator/Makefile +++ b/arch/arm/mach-integrator/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_LEDS) += leds.o obj-$(CONFIG_PCI) += pci_v3.o pci.o obj-$(CONFIG_CPU_FREQ_INTEGRATOR) += cpu.o obj-$(CONFIG_INTEGRATOR_IMPD1) += impd1.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index bd17b515431..bd1e5e3c9d3 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -14,6 +14,7 @@ #include <linux/spinlock.h> #include <linux/interrupt.h> #include <linux/sched.h> +#include <linux/smp.h> #include <asm/hardware.h> #include <asm/irq.h> @@ -221,7 +222,23 @@ integrator_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) */ timer1->TimerClear = 1; - timer_tick(regs); + /* + * the clock tick routines are only processed on the + * primary CPU + */ + if (hard_smp_processor_id() == 0) { + timer_tick(regs); +#ifdef CONFIG_SMP + smp_send_timer(); +#endif + } + +#ifdef CONFIG_SMP + /* + * this is the ARM equivalent of the APIC timer interrupt + */ + update_process_times(user_mode(regs)); +#endif /* CONFIG_SMP */ write_sequnlock(&xtime_lock); diff --git a/arch/arm/mach-integrator/headsmp.S b/arch/arm/mach-integrator/headsmp.S new file mode 100644 index 00000000000..ceaa88e30d7 --- /dev/null +++ b/arch/arm/mach-integrator/headsmp.S @@ -0,0 +1,37 @@ +/* + * linux/arch/arm/mach-integrator/headsmp.S + * + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <linux/init.h> + + __INIT + +/* + * Integrator specific entry point for secondary CPUs. This provides + * a "holding pen" into which all secondary cores are held until we're + * ready for them to initialise. + */ +ENTRY(integrator_secondary_startup) + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + ldr r6, [r6, r4] +pen: ldr r7, [r6] + cmp r7, r0 + bne pen + + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + +1: .long . + .long phys_pen_release diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 3b948e8c275..e0a01eef099 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -83,7 +83,6 @@ static struct map_desc intcp_io_desc[] __initdata = { { IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K, MT_DEVICE }, { IO_ADDRESS(INTEGRATOR_DBG_BASE), INTEGRATOR_DBG_BASE, SZ_4K, MT_DEVICE }, { IO_ADDRESS(INTEGRATOR_GPIO_BASE), INTEGRATOR_GPIO_BASE, SZ_4K, MT_DEVICE }, - { 0xfc900000, 0xc9000000, SZ_4K, MT_DEVICE }, { 0xfca00000, 0xca000000, SZ_4K, MT_DEVICE }, { 0xfcb00000, 0xcb000000, SZ_4K, MT_DEVICE }, }; diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c index d2c0ab21150..f1436e683b4 100644 --- a/arch/arm/mach-integrator/leds.c +++ b/arch/arm/mach-integrator/leds.c @@ -22,6 +22,8 @@ */ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/smp.h> +#include <linux/spinlock.h> #include <asm/hardware.h> #include <asm/io.h> @@ -85,4 +87,4 @@ static int __init leds_init(void) return 0; } -__initcall(leds_init); +core_initcall(leds_init); diff --git a/arch/arm/mach-integrator/platsmp.c b/arch/arm/mach-integrator/platsmp.c new file mode 100644 index 00000000000..ead15dfcb53 --- /dev/null +++ b/arch/arm/mach-integrator/platsmp.c @@ -0,0 +1,192 @@ +/* + * linux/arch/arm/mach-cintegrator/platsmp.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/mm.h> + +#include <asm/atomic.h> +#include <asm/delay.h> +#include <asm/mmu_context.h> +#include <asm/procinfo.h> +#include <asm/ptrace.h> +#include <asm/smp.h> + +extern void integrator_secondary_startup(void); + +/* + * control for which core is the next to come out of the secondary + * boot "holding pen" + */ +volatile int __initdata pen_release = -1; +unsigned long __initdata phys_pen_release = 0; + +static DEFINE_SPINLOCK(boot_lock); + +void __init platform_secondary_init(unsigned int cpu) +{ + /* + * the primary core may have used a "cross call" soft interrupt + * to get this processor out of WFI in the BootMonitor - make + * sure that we are no longer being sent this soft interrupt + */ + smp_cross_call_done(cpumask_of_cpu(cpu)); + + /* + * if any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + secondary_scan_irqs(); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + pen_release = -1; + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __init boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * The secondary processor is waiting to be released from + * the holding pen - release it, then wait for it to flag + * that it has been released by resetting pen_release. + * + * Note that "pen_release" is the hardware CPU ID, whereas + * "cpu" is Linux's internal ID. + */ + pen_release = cpu; + + /* + * XXX + * + * This is a later addition to the booting protocol: the + * bootMonitor now puts secondary cores into WFI, so + * poke_milo() no longer gets the cores moving; we need + * to send a soft interrupt to wake the secondary core. + * Use smp_cross_call() for this, since there's little + * point duplicating the code here + */ + smp_cross_call(cpumask_of_cpu(cpu)); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + if (pen_release == -1) + break; + + udelay(10); + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return pen_release != -1 ? -ENOSYS : 0; +} + +static void __init poke_milo(void) +{ + extern void secondary_startup(void); + + /* nobody is to be released from the pen yet */ + pen_release = -1; + + phys_pen_release = virt_to_phys(&pen_release); + + /* + * write the address of secondary startup into the system-wide + * flags register, then clear the bottom two bits, which is what + * BootMonitor is waiting for + */ +#if 1 +#define CINTEGRATOR_HDR_FLAGSS_OFFSET 0x30 + __raw_writel(virt_to_phys(integrator_secondary_startup), + (IO_ADDRESS(INTEGRATOR_HDR_BASE) + + CINTEGRATOR_HDR_FLAGSS_OFFSET)); +#define CINTEGRATOR_HDR_FLAGSC_OFFSET 0x34 + __raw_writel(3, + (IO_ADDRESS(INTEGRATOR_HDR_BASE) + + CINTEGRATOR_HDR_FLAGSC_OFFSET)); +#endif + + mb(); +} + +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + unsigned int ncores = get_core_count(); + unsigned int cpu = smp_processor_id(); + int i; + + /* sanity check */ + if (ncores == 0) { + printk(KERN_ERR + "Integrator/CP: strange CM count of 0? Default to 1\n"); + + ncores = 1; + } + + if (ncores > NR_CPUS) { + printk(KERN_WARNING + "Integrator/CP: no. of cores (%d) greater than configured " + "maximum of %d - clipping\n", + ncores, NR_CPUS); + ncores = NR_CPUS; + } + + /* + * start with some more config for the Boot CPU, now that + * the world is a bit more alive (which was not the case + * when smp_prepare_boot_cpu() was called) + */ + smp_store_cpu_info(cpu); + + /* + * are we trying to boot more cores than exist? + */ + if (max_cpus > ncores) + max_cpus = ncores; + + /* + * Initialise the present mask - this tells us which CPUs should + * be present. + */ + for (i = 0; i < max_cpus; i++) { + cpu_set(i, cpu_present_mask); + } + + /* + * Do we need any more CPUs? If so, then let them know where + * to start. Note that, on modern versions of MILO, the "poke" + * doesn't actually do anything until each individual core is + * sent a soft interrupt to get it out of WFI + */ + if (max_cpus > 1) + poke_milo(); +} diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 4f3c3d5c781..fc0555596d6 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -162,12 +162,13 @@ void __init ixp2000_map_io(void) static unsigned ticks_per_jiffy; static unsigned ticks_per_usec; static unsigned next_jiffy_time; +static volatile unsigned long *missing_jiffy_timer_csr; unsigned long ixp2000_gettimeoffset (void) { unsigned long offset; - offset = next_jiffy_time - *IXP2000_T4_CSR; + offset = next_jiffy_time - *missing_jiffy_timer_csr; return offset / ticks_per_usec; } @@ -179,7 +180,7 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) /* clear timer 1 */ ixp2000_reg_write(IXP2000_T1_CLR, 1); - while ((next_jiffy_time - *IXP2000_T4_CSR) > ticks_per_jiffy) { + while ((next_jiffy_time - *missing_jiffy_timer_csr) > ticks_per_jiffy) { timer_tick(regs); next_jiffy_time -= ticks_per_jiffy; } @@ -197,20 +198,37 @@ static struct irqaction ixp2000_timer_irq = { void __init ixp2000_init_time(unsigned long tick_rate) { - ixp2000_reg_write(IXP2000_T1_CLR, 0); - ixp2000_reg_write(IXP2000_T4_CLR, 0); - ticks_per_jiffy = (tick_rate + HZ/2) / HZ; ticks_per_usec = tick_rate / 1000000; + /* + * We use timer 1 as our timer interrupt. + */ + ixp2000_reg_write(IXP2000_T1_CLR, 0); ixp2000_reg_write(IXP2000_T1_CLD, ticks_per_jiffy - 1); ixp2000_reg_write(IXP2000_T1_CTL, (1 << 7)); /* - * We use T4 as a monotonic counter to track missed jiffies + * We use a second timer as a monotonic counter for tracking + * missed jiffies. The IXP2000 has four timers, but if we're + * on an A-step IXP2800, timer 2 and 3 don't work, so on those + * chips we use timer 4. Timer 4 is the only timer that can + * be used for the watchdog, so we use timer 2 if we're on a + * non-buggy chip. */ - ixp2000_reg_write(IXP2000_T4_CLD, -1); - ixp2000_reg_write(IXP2000_T4_CTL, (1 << 7)); + if ((*IXP2000_PRODUCT_ID & 0x001ffef0) == 0x00000000) { + printk(KERN_INFO "Enabling IXP2800 erratum #25 workaround\n"); + + ixp2000_reg_write(IXP2000_T4_CLR, 0); + ixp2000_reg_write(IXP2000_T4_CLD, -1); + ixp2000_reg_write(IXP2000_T4_CTL, (1 << 7)); + missing_jiffy_timer_csr = IXP2000_T4_CSR; + } else { + ixp2000_reg_write(IXP2000_T2_CLR, 0); + ixp2000_reg_write(IXP2000_T2_CLD, -1); + ixp2000_reg_write(IXP2000_T2_CTL, (1 << 7)); + missing_jiffy_timer_csr = IXP2000_T2_CSR; + } next_jiffy_time = 0xffffffff; /* register for interrupt */ diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index dd012d6e2f5..f2c9e0d2b24 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/device.h> +#include <linux/sysdev.h> #include <linux/major.h> #include <linux/fb.h> #include <linux/interrupt.h> @@ -106,6 +107,35 @@ static void __init lubbock_init_irq(void) set_irq_type(IRQ_GPIO(0), IRQT_FALLING); } +#ifdef CONFIG_PM + +static int lubbock_irq_resume(struct sys_device *dev) +{ + LUB_IRQ_MASK_EN = lubbock_irq_enabled; + return 0; +} + +static struct sysdev_class lubbock_irq_sysclass = { + set_kset_name("cpld_irq"), + .resume = lubbock_irq_resume, +}; + +static struct sys_device lubbock_irq_device = { + .cls = &lubbock_irq_sysclass, +}; + +static int __init lubbock_irq_device_init(void) +{ + int ret = sysdev_class_register(&lubbock_irq_sysclass); + if (ret == 0) + ret = sysdev_register(&lubbock_irq_device); + return ret; +} + +device_initcall(lubbock_irq_device_init); + +#endif + static int lubbock_udc_is_connected(void) { return (LUB_MISC_RD & (1 << 9)) == 0; diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 3f952237ae3..9896afca751 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/device.h> +#include <linux/sysdev.h> #include <linux/interrupt.h> #include <linux/sched.h> #include <linux/bitops.h> @@ -62,7 +63,6 @@ static struct irqchip mainstone_irq_chip = { .unmask = mainstone_unmask_irq, }; - static void mainstone_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) { @@ -100,6 +100,35 @@ static void __init mainstone_init_irq(void) set_irq_type(IRQ_GPIO(0), IRQT_FALLING); } +#ifdef CONFIG_PM + +static int mainstone_irq_resume(struct sys_device *dev) +{ + MST_INTMSKENA = mainstone_irq_enabled; + return 0; +} + +static struct sysdev_class mainstone_irq_sysclass = { + set_kset_name("cpld_irq"), + .resume = mainstone_irq_resume, +}; + +static struct sys_device mainstone_irq_device = { + .cls = &mainstone_irq_sysclass, +}; + +static int __init mainstone_irq_device_init(void) +{ + int ret = sysdev_class_register(&mainstone_irq_sysclass); + if (ret == 0) + ret = sysdev_register(&mainstone_irq_device); + return ret; +} + +device_initcall(mainstone_irq_device_init); + +#endif + static struct resource smc91x_resources[] = { [0] = { @@ -304,6 +333,15 @@ static void __init mainstone_map_io(void) PWER = 0xC0000002; PRER = 0x00000002; PFER = 0x00000002; + /* for use I SRAM as framebuffer. */ + PSLR |= 0xF04; + PCFR = 0x66; + /* For Keypad wakeup. */ + KPC &=~KPC_ASACT; + KPC |=KPC_AS; + PKWR = 0x000FD000; + /* Need read PKWR back after set it. */ + PKWR; } MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 82a4bf34c25..ac4dd433616 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -29,9 +29,6 @@ */ #undef DEBUG -extern void pxa_cpu_suspend(void); -extern void pxa_cpu_resume(void); - #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x #define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x] @@ -63,6 +60,12 @@ enum { SLEEP_SAVE_START = 0, SLEEP_SAVE_ICMR, SLEEP_SAVE_CKEN, +#ifdef CONFIG_PXA27x + SLEEP_SAVE_MDREFR, + SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER, + SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR, +#endif + SLEEP_SAVE_CKSUM, SLEEP_SAVE_SIZE @@ -75,9 +78,7 @@ static int pxa_pm_enter(suspend_state_t state) unsigned long checksum = 0; struct timespec delta, rtc; int i; - - if (state != PM_SUSPEND_MEM) - return -EINVAL; + extern void pxa_cpu_pm_enter(suspend_state_t state); #ifdef CONFIG_IWMMXT /* force any iWMMXt context to ram **/ @@ -100,16 +101,17 @@ static int pxa_pm_enter(suspend_state_t state) SAVE(GAFR2_L); SAVE(GAFR2_U); #ifdef CONFIG_PXA27x + SAVE(MDREFR); SAVE(GPLR3); SAVE(GPDR3); SAVE(GRER3); SAVE(GFER3); SAVE(PGSR3); SAVE(GAFR3_L); SAVE(GAFR3_U); + SAVE(PWER); SAVE(PCFR); SAVE(PRER); + SAVE(PFER); SAVE(PKWR); #endif SAVE(ICMR); ICMR = 0; SAVE(CKEN); - CKEN = 0; - SAVE(PSTR); /* Note: wake up source are set up in each machine specific files */ @@ -123,16 +125,15 @@ static int pxa_pm_enter(suspend_state_t state) /* Clear sleep reset status */ RCSR = RCSR_SMR; - /* set resume return address */ - PSPR = virt_to_phys(pxa_cpu_resume); - /* before sleeping, calculate and save a checksum */ for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++) checksum += sleep_save[i]; sleep_save[SLEEP_SAVE_CKSUM] = checksum; /* *** go zzz *** */ - pxa_cpu_suspend(); + pxa_cpu_pm_enter(state); + + cpu_init(); /* after sleeping, validate the checksum */ checksum = 0; @@ -145,7 +146,7 @@ static int pxa_pm_enter(suspend_state_t state) LUB_HEXLED = 0xbadbadc5; #endif while (1) - pxa_cpu_suspend(); + pxa_cpu_pm_enter(state); } /* ensure not to come back here if it wasn't intended */ @@ -162,8 +163,11 @@ static int pxa_pm_enter(suspend_state_t state) RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); #ifdef CONFIG_PXA27x + RESTORE(MDREFR); RESTORE(GAFR3_L); RESTORE(GAFR3_U); RESTORE_GPLEVEL(3); RESTORE(GPDR3); RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3); + RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER); + RESTORE(PFER); RESTORE(PKWR); #endif PSSR = PSSR_RDH | PSSR_PH; @@ -197,7 +201,9 @@ unsigned long sleep_phys_sp(void *sp) */ static int pxa_pm_prepare(suspend_state_t state) { - return 0; + extern int pxa_cpu_pm_prepare(suspend_state_t state); + + return pxa_cpu_pm_prepare(state); } /* diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index e887b7175ef..7869c3b4e62 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -16,6 +16,7 @@ * initialization stuff for PXA machines which can be overridden later if * need be. */ +#include <linux/config.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -102,3 +103,35 @@ unsigned int get_lcdclk_frequency_10khz(void) } EXPORT_SYMBOL(get_lcdclk_frequency_10khz); + +#ifdef CONFIG_PM + +int pxa_cpu_pm_prepare(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_MEM: + break; + default: + return -EINVAL; + } + + return 0; +} + +void pxa_cpu_pm_enter(suspend_state_t state) +{ + extern void pxa_cpu_suspend(unsigned int); + extern void pxa_cpu_resume(void); + + CKEN = 0; + + switch (state) { + case PM_SUSPEND_MEM: + /* set resume return address */ + PSPR = virt_to_phys(pxa_cpu_resume); + pxa_cpu_suspend(3); + break; + } +} + +#endif diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 7e863afefb5..893964fb965 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -120,6 +120,42 @@ EXPORT_SYMBOL(get_clk_frequency_khz); EXPORT_SYMBOL(get_memclk_frequency_10khz); EXPORT_SYMBOL(get_lcdclk_frequency_10khz); +#ifdef CONFIG_PM + +int pxa_cpu_pm_prepare(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_MEM: + return 0; + default: + return -EINVAL; + } +} + +void pxa_cpu_pm_enter(suspend_state_t state) +{ + extern void pxa_cpu_standby(void); + extern void pxa_cpu_suspend(unsigned int); + extern void pxa_cpu_resume(void); + + CKEN = CKEN22_MEMC | CKEN9_OSTIMER; + + /* ensure voltage-change sequencer not initiated, which hangs */ + PCFR &= ~PCFR_FVC; + + /* Clear edge-detect status register. */ + PEDR = 0xDF12FE1B; + + switch (state) { + case PM_SUSPEND_MEM: + /* set resume return address */ + PSPR = virt_to_phys(pxa_cpu_resume); + pxa_cpu_suspend(3); + break; + } +} + +#endif /* * device registration specific to PXA27x. diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index e23f534d4e1..8d986b8401c 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -478,7 +478,7 @@ static int s3c2440_clk_add(struct sys_device *sysdev) { unsigned long upllcon = __raw_readl(S3C2410_UPLLCON); - s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal.rate) * 2; + s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal.rate); printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz\n", print_mhz(s3c2440_clk_upll.rate)); diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index bc229fab86d..c7c28890d40 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -785,6 +785,10 @@ int s3c2410_dma_free(dmach_t channel, s3c2410_dma_client_t *client) chan->client = NULL; chan->in_use = 0; + if (chan->irq_claimed) + free_irq(chan->irq, (void *)chan); + chan->irq_claimed = 0; + local_irq_restore(flags); return 0; diff --git a/arch/arm/mach-s3c2410/s3c2440.c b/arch/arm/mach-s3c2410/s3c2440.c index 9a8cc5ae225..d4c8281b55f 100644 --- a/arch/arm/mach-s3c2410/s3c2440.c +++ b/arch/arm/mach-s3c2410/s3c2440.c @@ -192,9 +192,11 @@ void __init s3c2440_map_io(struct map_desc *mach_desc, int size) iotable_init(s3c2440_iodesc, ARRAY_SIZE(s3c2440_iodesc)); iotable_init(mach_desc, size); + /* rename any peripherals used differing from the s3c2410 */ - s3c_device_i2c.name = "s3c2440-i2c"; + s3c_device_i2c.name = "s3c2440-i2c"; + s3c_device_nand.name = "s3c2440-nand"; /* change irq for watchdog */ @@ -225,7 +227,7 @@ void __init s3c2440_init_clocks(int xtal) break; case S3C2440_CLKDIVN_HDIVN_2: - hdiv = 1; + hdiv = 2; break; case S3C2440_CLKDIVN_HDIVN_4_8: diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index 50cde576dad..6923316b3d0 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -150,7 +150,7 @@ config SA1100_SSP config H3600_SLEEVE tristate "Compaq iPAQ Handheld sleeve support" - depends on SA1100_H3600 + depends on SA1100_H3100 || SA1100_H3600 help Choose this option to enable support for extension packs (sleeves) for the Compaq iPAQ H3XXX series of handheld computers. This option diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c index 379ea5e3950..59c7964cfe1 100644 --- a/arch/arm/mach-sa1100/pm.c +++ b/arch/arm/mach-sa1100/pm.c @@ -88,6 +88,8 @@ static int sa11x0_pm_enter(suspend_state_t state) /* go zzz */ sa1100_cpu_suspend(); + cpu_init(); + /* * Ensure not to come back here if it wasn't intended */ diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile index 5d608837757..ba81e70ed81 100644 --- a/arch/arm/mach-versatile/Makefile +++ b/arch/arm/mach-versatile/Makefile @@ -5,3 +5,4 @@ obj-y := core.o clock.o obj-$(CONFIG_ARCH_VERSATILE_PB) += versatile_pb.o obj-$(CONFIG_MACH_VERSATILE_AB) += versatile_ab.o +obj-$(CONFIG_PCI) += pci.o diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 554e1bd30d6..6a7cbea5e09 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -196,11 +196,15 @@ static struct map_desc versatile_io_desc[] __initdata = { #ifdef CONFIG_DEBUG_LL { IO_ADDRESS(VERSATILE_UART0_BASE), VERSATILE_UART0_BASE, SZ_4K, MT_DEVICE }, #endif -#ifdef FIXME - { PCI_MEMORY_VADDR, PHYS_PCI_MEM_BASE, SZ_16M, MT_DEVICE }, - { PCI_CONFIG_VADDR, PHYS_PCI_CONFIG_BASE, SZ_16M, MT_DEVICE }, - { PCI_V3_VADDR, PHYS_PCI_V3_BASE, SZ_512K, MT_DEVICE }, - { PCI_IO_VADDR, PHYS_PCI_IO_BASE, SZ_64K, MT_DEVICE }, +#ifdef CONFIG_PCI + { IO_ADDRESS(VERSATILE_PCI_CORE_BASE), VERSATILE_PCI_CORE_BASE, SZ_4K, MT_DEVICE }, + { VERSATILE_PCI_VIRT_BASE, VERSATILE_PCI_BASE, VERSATILE_PCI_BASE_SIZE, MT_DEVICE }, + { VERSATILE_PCI_CFG_VIRT_BASE, VERSATILE_PCI_CFG_BASE, VERSATILE_PCI_CFG_BASE_SIZE, MT_DEVICE }, +#if 0 + { VERSATILE_PCI_VIRT_MEM_BASE0, VERSATILE_PCI_MEM_BASE0, SZ_16M, MT_DEVICE }, + { VERSATILE_PCI_VIRT_MEM_BASE1, VERSATILE_PCI_MEM_BASE1, SZ_16M, MT_DEVICE }, + { VERSATILE_PCI_VIRT_MEM_BASE2, VERSATILE_PCI_MEM_BASE2, SZ_16M, MT_DEVICE }, +#endif #endif }; @@ -543,7 +547,7 @@ static void versatile_clcd_enable(struct clcd_fb *fb) val |= SYS_CLCD_MODE_5551; break; case 6: - val |= SYS_CLCD_MODE_565_BLSB; + val |= SYS_CLCD_MODE_565_RLSB; break; case 8: val |= SYS_CLCD_MODE_888; diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c new file mode 100644 index 00000000000..d1565e851f0 --- /dev/null +++ b/arch/arm/mach-versatile/pci.c @@ -0,0 +1,360 @@ +/* + * linux/arch/arm/mach-versatile/pci.c + * + * (C) Copyright Koninklijke Philips Electronics NV 2004. All rights reserved. + * You can redistribute and/or modify this software under the terms of version 2 + * of the GNU General Public License as published by the Free Software Foundation. + * THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY WARRANTY; WITHOUT EVEN THE IMPLIED + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * Koninklijke Philips Electronics nor its subsidiaries is obligated to provide any support for this software. + * + * ARM Versatile PCI driver. + * + * 14/04/2005 Initial version, colin.king@philips.com + * + */ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/init.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/mach/pci.h> +#include <asm/mach-types.h> + +/* + * these spaces are mapped using the following base registers: + * + * Usage Local Bus Memory Base/Map registers used + * + * Mem 50000000 - 5FFFFFFF LB_BASE0/LB_MAP0, non prefetch + * Mem 60000000 - 6FFFFFFF LB_BASE1/LB_MAP1, prefetch + * IO 44000000 - 4FFFFFFF LB_BASE2/LB_MAP2, IO + * Cfg 42000000 - 42FFFFFF PCI config + * + */ +#define SYS_PCICTL IO_ADDRESS(VERSATILE_SYS_PCICTL) +#define PCI_IMAP0 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x0) +#define PCI_IMAP1 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x4) +#define PCI_IMAP2 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x8) +#define PCI_SMAP0 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x10) +#define PCI_SMAP1 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14) +#define PCI_SMAP2 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18) +#define PCI_SELFID IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0xc) + +#define DEVICE_ID_OFFSET 0x00 +#define CSR_OFFSET 0x04 +#define CLASS_ID_OFFSET 0x08 + +#define VP_PCI_DEVICE_ID 0x030010ee +#define VP_PCI_CLASS_ID 0x0b400000 + +static unsigned long pci_slot_ignore = 0; + +static int __init versatile_pci_slot_ignore(char *str) +{ + int retval; + int slot; + + while ((retval = get_option(&str,&slot))) { + if ((slot < 0) || (slot > 31)) { + printk("Illegal slot value: %d\n",slot); + } else { + pci_slot_ignore |= (1 << slot); + } + } + return 1; +} + +__setup("pci_slot_ignore=", versatile_pci_slot_ignore); + + +static unsigned long __pci_addr(struct pci_bus *bus, + unsigned int devfn, int offset) +{ + unsigned int busnr = bus->number; + + /* + * Trap out illegal values + */ + if (offset > 255) + BUG(); + if (busnr > 255) + BUG(); + if (devfn > 255) + BUG(); + + return (VERSATILE_PCI_CFG_VIRT_BASE | (busnr << 16) | + (PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | offset); +} + +static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *val) +{ + unsigned long addr = __pci_addr(bus, devfn, where); + u32 v; + int slot = PCI_SLOT(devfn); + + if (pci_slot_ignore & (1 << slot)) { + /* Ignore this slot */ + switch (size) { + case 1: + v = 0xff; + break; + case 2: + v = 0xffff; + break; + default: + v = 0xffffffff; + } + } else { + switch (size) { + case 1: + addr &= ~3; + v = __raw_readb(addr); + break; + + case 2: + v = __raw_readl(addr & ~3); + if (addr & 2) v >>= 16; + v &= 0xffff; + break; + + default: + addr &= ~3; + v = __raw_readl(addr); + break; + } + } + + *val = v; + return PCIBIOS_SUCCESSFUL; +} + +static int versatile_write_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 val) +{ + unsigned long addr = __pci_addr(bus, devfn, where); + int slot = PCI_SLOT(devfn); + + if (pci_slot_ignore & (1 << slot)) { + return PCIBIOS_SUCCESSFUL; + } + + switch (size) { + case 1: + __raw_writeb((u8)val, addr); + break; + + case 2: + __raw_writew((u16)val, addr); + break; + + case 4: + __raw_writel(val, addr); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops pci_versatile_ops = { + .read = versatile_read_config, + .write = versatile_write_config, +}; + +static struct resource io_mem = { + .name = "PCI I/O space", + .start = VERSATILE_PCI_MEM_BASE0, + .end = VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1, + .flags = IORESOURCE_IO, +}; + +static struct resource non_mem = { + .name = "PCI non-prefetchable", + .start = VERSATILE_PCI_MEM_BASE1, + .end = VERSATILE_PCI_MEM_BASE1+VERSATILE_PCI_MEM_BASE1_SIZE-1, + .flags = IORESOURCE_MEM, +}; + +static struct resource pre_mem = { + .name = "PCI prefetchable", + .start = VERSATILE_PCI_MEM_BASE2, + .end = VERSATILE_PCI_MEM_BASE2+VERSATILE_PCI_MEM_BASE2_SIZE-1, + .flags = IORESOURCE_MEM | IORESOURCE_PREFETCH, +}; + +static int __init pci_versatile_setup_resources(struct resource **resource) +{ + int ret = 0; + + ret = request_resource(&iomem_resource, &io_mem); + if (ret) { + printk(KERN_ERR "PCI: unable to allocate I/O " + "memory region (%d)\n", ret); + goto out; + } + ret = request_resource(&iomem_resource, &non_mem); + if (ret) { + printk(KERN_ERR "PCI: unable to allocate non-prefetchable " + "memory region (%d)\n", ret); + goto release_io_mem; + } + ret = request_resource(&iomem_resource, &pre_mem); + if (ret) { + printk(KERN_ERR "PCI: unable to allocate prefetchable " + "memory region (%d)\n", ret); + goto release_non_mem; + } + + /* + * bus->resource[0] is the IO resource for this bus + * bus->resource[1] is the mem resource for this bus + * bus->resource[2] is the prefetch mem resource for this bus + */ + resource[0] = &io_mem; + resource[1] = &non_mem; + resource[2] = &pre_mem; + + goto out; + + release_non_mem: + release_resource(&non_mem); + release_io_mem: + release_resource(&io_mem); + out: + return ret; +} + +int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) +{ + int ret = 0; + int i; + int myslot = -1; + unsigned long val; + + if (nr == 0) { + sys->mem_offset = 0; + ret = pci_versatile_setup_resources(sys->resource); + if (ret < 0) { + printk("pci_versatile_setup: resources... oops?\n"); + goto out; + } + } else { + printk("pci_versatile_setup: resources... nr == 0??\n"); + goto out; + } + + __raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28,PCI_IMAP0); + __raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28,PCI_IMAP1); + __raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28,PCI_IMAP2); + + __raw_writel(1, SYS_PCICTL); + + val = __raw_readl(SYS_PCICTL); + if (!(val & 1)) { + printk("Not plugged into PCI backplane!\n"); + ret = -EIO; + goto out; + } + + /* + * We need to discover the PCI core first to configure itself + * before the main PCI probing is performed + */ + for (i=0; i<32; i++) { + if ((__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+DEVICE_ID_OFFSET) == VP_PCI_DEVICE_ID) && + (__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+CLASS_ID_OFFSET) == VP_PCI_CLASS_ID)) { + myslot = i; + + __raw_writel(myslot, PCI_SELFID); + val = __raw_readl(VERSATILE_PCI_CFG_VIRT_BASE+(myslot<<11)+CSR_OFFSET); + val |= (1<<2); + __raw_writel(val, VERSATILE_PCI_CFG_VIRT_BASE+(myslot<<11)+CSR_OFFSET); + break; + } + } + + if (myslot == -1) { + printk("Cannot find PCI core!\n"); + ret = -EIO; + } else { + printk("PCI core found (slot %d)\n",myslot); + /* Do not to map Versatile FPGA PCI device + into memory space as we are short of + mappable memory */ + pci_slot_ignore |= (1 << myslot); + ret = 1; + } + + out: + return ret; +} + + +struct pci_bus *pci_versatile_scan_bus(int nr, struct pci_sys_data *sys) +{ + return pci_scan_bus(sys->busnr, &pci_versatile_ops, sys); +} + +/* + * V3_LB_BASE? - local bus address + * V3_LB_MAP? - pci bus address + */ +void __init pci_versatile_preinit(void) +{ +} + +void __init pci_versatile_postinit(void) +{ +} + + +/* + * map the specified device/slot/pin to an IRQ. Different backplanes may need to modify this. + */ +static int __init versatile_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + int devslot = PCI_SLOT(dev->devfn); + + /* slot, pin, irq + 24 1 27 + 25 1 28 untested + 26 1 29 + 27 1 30 untested + */ + + irq = 27 + ((slot + pin + 2) % 3); /* Fudged */ + + printk("map irq: slot %d, pin %d, devslot %d, irq: %d\n",slot,pin,devslot,irq); + + return irq; +} + +static struct hw_pci versatile_pci __initdata = { + .swizzle = NULL, + .map_irq = versatile_map_irq, + .nr_controllers = 1, + .setup = pci_versatile_setup, + .scan = pci_versatile_scan_bus, + .preinit = pci_versatile_preinit, + .postinit = pci_versatile_postinit, +}; + +static int __init versatile_pci_init(void) +{ + pci_common_init(&versatile_pci); + return 0; +} + +subsys_initcall(versatile_pci_init); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index c4fc6be629d..95606b4a3ba 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -62,7 +62,7 @@ config CPU_ARM720T # ARM920T config CPU_ARM920T bool "Support ARM920T processor" if !ARCH_S3C2410 - depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX + depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000 default y if ARCH_S3C2410 select CPU_32v4 select CPU_ABRT_EV4T @@ -228,7 +228,6 @@ config CPU_SA1100 select CPU_CACHE_V4WB select CPU_CACHE_VIVT select CPU_TLB_V4WB - select CPU_MINICACHE # XScale config CPU_XSCALE @@ -239,7 +238,6 @@ config CPU_XSCALE select CPU_ABRT_EV5T select CPU_CACHE_VIVT select CPU_TLB_V4WBI - select CPU_MINICACHE # ARMv6 config CPU_V6 @@ -345,11 +343,6 @@ config CPU_TLB_V4WBI config CPU_TLB_V6 bool -config CPU_MINICACHE - bool - help - Processor has a minicache. - comment "Processor Features" config ARM_THUMB @@ -412,21 +405,28 @@ config CPU_BPREDICT_DISABLE config TLS_REG_EMUL bool - default y if (SMP || CPU_32v6) && (CPU_32v5 || CPU_32v4 || CPU_32v3) + default y if SMP && (CPU_32v5 || CPU_32v4 || CPU_32v3) help - We might be running on an ARMv6+ processor which should have the TLS - register but for some reason we can't use it, or maybe an SMP system - using a pre-ARMv6 processor (there are apparently a few prototypes - like that in existence) and therefore access to that register must - be emulated. + An SMP system using a pre-ARMv6 processor (there are apparently + a few prototypes like that in existence) and therefore access to + that required register must be emulated. config HAS_TLS_REG bool - depends on CPU_32v6 - default y if !TLS_REG_EMUL + depends on !TLS_REG_EMUL + default y if SMP || CPU_32v7 help This selects support for the CP15 thread register. - It is defined to be available on ARMv6 or later. If a particular - ARMv6 or later CPU doesn't support it then it must omc;ide "select - TLS_REG_EMUL" along with its other caracteristics. + It is defined to be available on some ARMv6 processors (including + all SMP capable ARMv6's) or later processors. User space may + assume directly accessing that register and always obtain the + expected value only on ARMv7 and above. + +config NEEDS_SYSCALL_FOR_CMPXCHG + bool + default y if SMP && (CPU_32v5 || CPU_32v4 || CPU_32v3) + help + SMP on a pre-ARMv6 processor? Well OK then. + Forget about fast user space cmpxchg support. + It is just not possible. diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index ccf316c11e0..59f47d4c2df 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -31,8 +31,6 @@ obj-$(CONFIG_CPU_COPY_V6) += copypage-v6.o mmu.o obj-$(CONFIG_CPU_SA1100) += copypage-v4mc.o obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o -obj-$(CONFIG_CPU_MINICACHE) += minicache.o - obj-$(CONFIG_CPU_TLB_V3) += tlb-v3.o obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o obj-$(CONFIG_CPU_TLB_V4WB) += tlb-v4wb.o diff --git a/arch/arm/mm/copypage-v4mc.S b/arch/arm/mm/copypage-v4mc.S deleted file mode 100644 index 305af3dab3d..00000000000 --- a/arch/arm/mm/copypage-v4mc.S +++ /dev/null @@ -1,80 +0,0 @@ -/* - * linux/arch/arm/lib/copy_page-armv4mc.S - * - * Copyright (C) 1995-2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * ASM optimised string functions - */ -#include <linux/linkage.h> -#include <linux/init.h> -#include <asm/constants.h> - - .text - .align 5 -/* - * ARMv4 mini-dcache optimised copy_user_page - * - * We flush the destination cache lines just before we write the data into the - * corresponding address. Since the Dcache is read-allocate, this removes the - * Dcache aliasing issue. The writes will be forwarded to the write buffer, - * and merged as appropriate. - * - * Note: We rely on all ARMv4 processors implementing the "invalidate D line" - * instruction. If your processor does not supply this, you have to write your - * own copy_user_page that does the right thing. - */ -ENTRY(v4_mc_copy_user_page) - stmfd sp!, {r4, lr} @ 2 - mov r4, r0 - mov r0, r1 - bl map_page_minicache - mov r1, #PAGE_SZ/64 @ 1 - ldmia r0!, {r2, r3, ip, lr} @ 4 -1: mcr p15, 0, r4, c7, c6, 1 @ 1 invalidate D line - stmia r4!, {r2, r3, ip, lr} @ 4 - ldmia r0!, {r2, r3, ip, lr} @ 4+1 - stmia r4!, {r2, r3, ip, lr} @ 4 - ldmia r0!, {r2, r3, ip, lr} @ 4 - mcr p15, 0, r4, c7, c6, 1 @ 1 invalidate D line - stmia r4!, {r2, r3, ip, lr} @ 4 - ldmia r0!, {r2, r3, ip, lr} @ 4 - subs r1, r1, #1 @ 1 - stmia r4!, {r2, r3, ip, lr} @ 4 - ldmneia r0!, {r2, r3, ip, lr} @ 4 - bne 1b @ 1 - ldmfd sp!, {r4, pc} @ 3 - - .align 5 -/* - * ARMv4 optimised clear_user_page - * - * Same story as above. - */ -ENTRY(v4_mc_clear_user_page) - str lr, [sp, #-4]! - mov r1, #PAGE_SZ/64 @ 1 - mov r2, #0 @ 1 - mov r3, #0 @ 1 - mov ip, #0 @ 1 - mov lr, #0 @ 1 -1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line - stmia r0!, {r2, r3, ip, lr} @ 4 - stmia r0!, {r2, r3, ip, lr} @ 4 - mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line - stmia r0!, {r2, r3, ip, lr} @ 4 - stmia r0!, {r2, r3, ip, lr} @ 4 - subs r1, r1, #1 @ 1 - bne 1b @ 1 - ldr pc, [sp], #4 - - __INITDATA - - .type v4_mc_user_fns, #object -ENTRY(v4_mc_user_fns) - .long v4_mc_clear_user_page - .long v4_mc_copy_user_page - .size v4_mc_user_fns, . - v4_mc_user_fns diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c new file mode 100644 index 00000000000..fc69dccdace --- /dev/null +++ b/arch/arm/mm/copypage-v4mc.c @@ -0,0 +1,111 @@ +/* + * linux/arch/arm/lib/copypage-armv4mc.S + * + * Copyright (C) 1995-2005 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This handles the mini data cache, as found on SA11x0 and XScale + * processors. When we copy a user page page, we map it in such a way + * that accesses to this page will not touch the main data cache, but + * will be cached in the mini data cache. This prevents us thrashing + * the main data cache on page faults. + */ +#include <linux/init.h> +#include <linux/mm.h> + +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/tlbflush.h> + +/* + * 0xffff8000 to 0xffffffff is reserved for any ARM architecture + * specific hacks for copying pages efficiently. + */ +#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \ + L_PTE_CACHEABLE) + +#define TOP_PTE(x) pte_offset_kernel(top_pmd, x) + +static DEFINE_SPINLOCK(minicache_lock); + +/* + * ARMv4 mini-dcache optimised copy_user_page + * + * We flush the destination cache lines just before we write the data into the + * corresponding address. Since the Dcache is read-allocate, this removes the + * Dcache aliasing issue. The writes will be forwarded to the write buffer, + * and merged as appropriate. + * + * Note: We rely on all ARMv4 processors implementing the "invalidate D line" + * instruction. If your processor does not supply this, you have to write your + * own copy_user_page that does the right thing. + */ +static void __attribute__((naked)) +mc_copy_user_page(void *from, void *to) +{ + asm volatile( + "stmfd sp!, {r4, lr} @ 2\n\ + mov r4, %2 @ 1\n\ + ldmia %0!, {r2, r3, ip, lr} @ 4\n\ +1: mcr p15, 0, %1, c7, c6, 1 @ 1 invalidate D line\n\ + stmia %1!, {r2, r3, ip, lr} @ 4\n\ + ldmia %0!, {r2, r3, ip, lr} @ 4+1\n\ + stmia %1!, {r2, r3, ip, lr} @ 4\n\ + ldmia %0!, {r2, r3, ip, lr} @ 4\n\ + mcr p15, 0, %1, c7, c6, 1 @ 1 invalidate D line\n\ + stmia %1!, {r2, r3, ip, lr} @ 4\n\ + ldmia %0!, {r2, r3, ip, lr} @ 4\n\ + subs r4, r4, #1 @ 1\n\ + stmia %1!, {r2, r3, ip, lr} @ 4\n\ + ldmneia %0!, {r2, r3, ip, lr} @ 4\n\ + bne 1b @ 1\n\ + ldmfd sp!, {r4, pc} @ 3" + : + : "r" (from), "r" (to), "I" (PAGE_SIZE / 64)); +} + +void v4_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr) +{ + spin_lock(&minicache_lock); + + set_pte(TOP_PTE(0xffff8000), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot)); + flush_tlb_kernel_page(0xffff8000); + + mc_copy_user_page((void *)0xffff8000, kto); + + spin_unlock(&minicache_lock); +} + +/* + * ARMv4 optimised clear_user_page + */ +void __attribute__((naked)) +v4_mc_clear_user_page(void *kaddr, unsigned long vaddr) +{ + asm volatile( + "str lr, [sp, #-4]!\n\ + mov r1, %0 @ 1\n\ + mov r2, #0 @ 1\n\ + mov r3, #0 @ 1\n\ + mov ip, #0 @ 1\n\ + mov lr, #0 @ 1\n\ +1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\ + stmia r0!, {r2, r3, ip, lr} @ 4\n\ + stmia r0!, {r2, r3, ip, lr} @ 4\n\ + mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\ + stmia r0!, {r2, r3, ip, lr} @ 4\n\ + stmia r0!, {r2, r3, ip, lr} @ 4\n\ + subs r1, r1, #1 @ 1\n\ + bne 1b @ 1\n\ + ldr pc, [sp], #4" + : + : "I" (PAGE_SIZE / 64)); +} + +struct cpu_user_fns v4_mc_user_fns __initdata = { + .cpu_clear_user_page = v4_mc_clear_user_page, + .cpu_copy_user_page = v4_mc_copy_user_page, +}; diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index 694ac820885..27d041574ea 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -26,11 +26,9 @@ #define to_address (0xffffc000) #define to_pgprot PAGE_KERNEL -static pte_t *from_pte; -static pte_t *to_pte; -static DEFINE_SPINLOCK(v6_lock); +#define TOP_PTE(x) pte_offset_kernel(top_pmd, x) -#define DCACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT) +static DEFINE_SPINLOCK(v6_lock); /* * Copy the user page. No aliasing to deal with so we can just @@ -55,7 +53,7 @@ void v6_clear_user_page_nonaliasing(void *kaddr, unsigned long vaddr) */ void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vaddr) { - unsigned int offset = DCACHE_COLOUR(vaddr); + unsigned int offset = CACHE_COLOUR(vaddr); unsigned long from, to; /* @@ -74,8 +72,8 @@ void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vadd */ spin_lock(&v6_lock); - set_pte(from_pte + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, from_pgprot)); - set_pte(to_pte + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, to_pgprot)); + set_pte(TOP_PTE(from_address) + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, from_pgprot)); + set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, to_pgprot)); from = from_address + (offset << PAGE_SHIFT); to = to_address + (offset << PAGE_SHIFT); @@ -95,7 +93,7 @@ void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vadd */ void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr) { - unsigned int offset = DCACHE_COLOUR(vaddr); + unsigned int offset = CACHE_COLOUR(vaddr); unsigned long to = to_address + (offset << PAGE_SHIFT); /* @@ -114,7 +112,7 @@ void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr) */ spin_lock(&v6_lock); - set_pte(to_pte + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, to_pgprot)); + set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, to_pgprot)); flush_tlb_kernel_page(to); clear_page((void *)to); @@ -129,21 +127,6 @@ struct cpu_user_fns v6_user_fns __initdata = { static int __init v6_userpage_init(void) { if (cache_is_vipt_aliasing()) { - pgd_t *pgd; - pmd_t *pmd; - - pgd = pgd_offset_k(from_address); - pmd = pmd_alloc(&init_mm, pgd, from_address); - if (!pmd) - BUG(); - from_pte = pte_alloc_kernel(&init_mm, pmd, from_address); - if (!from_pte) - BUG(); - - to_pte = pte_alloc_kernel(&init_mm, pmd, to_address); - if (!to_pte) - BUG(); - cpu_user.cpu_clear_user_page = v6_clear_user_page_aliasing; cpu_user.cpu_copy_user_page = v6_copy_user_page_aliasing; } @@ -151,5 +134,4 @@ static int __init v6_userpage_init(void) return 0; } -__initcall(v6_userpage_init); - +core_initcall(v6_userpage_init); diff --git a/arch/arm/mm/copypage-xscale.S b/arch/arm/mm/copypage-xscale.S deleted file mode 100644 index bb277316ef5..00000000000 --- a/arch/arm/mm/copypage-xscale.S +++ /dev/null @@ -1,113 +0,0 @@ -/* - * linux/arch/arm/lib/copypage-xscale.S - * - * Copyright (C) 2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> -#include <linux/init.h> -#include <asm/constants.h> - -/* - * General note: - * We don't really want write-allocate cache behaviour for these functions - * since that will just eat through 8K of the cache. - */ - - .text - .align 5 -/* - * XScale optimised copy_user_page - * r0 = destination - * r1 = source - * r2 = virtual user address of ultimate destination page - * - * The source page may have some clean entries in the cache already, but we - * can safely ignore them - break_cow() will flush them out of the cache - * if we eventually end up using our copied page. - * - * What we could do is use the mini-cache to buffer reads from the source - * page. We rely on the mini-cache being smaller than one page, so we'll - * cycle through the complete cache anyway. - */ -ENTRY(xscale_mc_copy_user_page) - stmfd sp!, {r4, r5, lr} - mov r5, r0 - mov r0, r1 - bl map_page_minicache - mov r1, r5 - mov lr, #PAGE_SZ/64-1 - - /* - * Strangely enough, best performance is achieved - * when prefetching destination as well. (NP) - */ - pld [r0, #0] - pld [r0, #32] - pld [r1, #0] - pld [r1, #32] - -1: pld [r0, #64] - pld [r0, #96] - pld [r1, #64] - pld [r1, #96] - -2: ldrd r2, [r0], #8 - ldrd r4, [r0], #8 - mov ip, r1 - strd r2, [r1], #8 - ldrd r2, [r0], #8 - strd r4, [r1], #8 - ldrd r4, [r0], #8 - strd r2, [r1], #8 - strd r4, [r1], #8 - mcr p15, 0, ip, c7, c10, 1 @ clean D line - ldrd r2, [r0], #8 - mcr p15, 0, ip, c7, c6, 1 @ invalidate D line - ldrd r4, [r0], #8 - mov ip, r1 - strd r2, [r1], #8 - ldrd r2, [r0], #8 - strd r4, [r1], #8 - ldrd r4, [r0], #8 - strd r2, [r1], #8 - strd r4, [r1], #8 - mcr p15, 0, ip, c7, c10, 1 @ clean D line - subs lr, lr, #1 - mcr p15, 0, ip, c7, c6, 1 @ invalidate D line - bgt 1b - beq 2b - - ldmfd sp!, {r4, r5, pc} - - .align 5 -/* - * XScale optimised clear_user_page - * r0 = destination - * r1 = virtual user address of ultimate destination page - */ -ENTRY(xscale_mc_clear_user_page) - mov r1, #PAGE_SZ/32 - mov r2, #0 - mov r3, #0 -1: mov ip, r0 - strd r2, [r0], #8 - strd r2, [r0], #8 - strd r2, [r0], #8 - strd r2, [r0], #8 - mcr p15, 0, ip, c7, c10, 1 @ clean D line - subs r1, r1, #1 - mcr p15, 0, ip, c7, c6, 1 @ invalidate D line - bne 1b - mov pc, lr - - __INITDATA - - .type xscale_mc_user_fns, #object -ENTRY(xscale_mc_user_fns) - .long xscale_mc_clear_user_page - .long xscale_mc_copy_user_page - .size xscale_mc_user_fns, . - xscale_mc_user_fns diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c new file mode 100644 index 00000000000..42a6ee255ce --- /dev/null +++ b/arch/arm/mm/copypage-xscale.c @@ -0,0 +1,131 @@ +/* + * linux/arch/arm/lib/copypage-xscale.S + * + * Copyright (C) 1995-2005 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This handles the mini data cache, as found on SA11x0 and XScale + * processors. When we copy a user page page, we map it in such a way + * that accesses to this page will not touch the main data cache, but + * will be cached in the mini data cache. This prevents us thrashing + * the main data cache on page faults. + */ +#include <linux/init.h> +#include <linux/mm.h> + +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/tlbflush.h> + +/* + * 0xffff8000 to 0xffffffff is reserved for any ARM architecture + * specific hacks for copying pages efficiently. + */ +#define COPYPAGE_MINICACHE 0xffff8000 + +#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \ + L_PTE_CACHEABLE) + +#define TOP_PTE(x) pte_offset_kernel(top_pmd, x) + +static DEFINE_SPINLOCK(minicache_lock); + +/* + * XScale mini-dcache optimised copy_user_page + * + * We flush the destination cache lines just before we write the data into the + * corresponding address. Since the Dcache is read-allocate, this removes the + * Dcache aliasing issue. The writes will be forwarded to the write buffer, + * and merged as appropriate. + */ +static void __attribute__((naked)) +mc_copy_user_page(void *from, void *to) +{ + /* + * Strangely enough, best performance is achieved + * when prefetching destination as well. (NP) + */ + asm volatile( + "stmfd sp!, {r4, r5, lr} \n\ + mov lr, %2 \n\ + pld [r0, #0] \n\ + pld [r0, #32] \n\ + pld [r1, #0] \n\ + pld [r1, #32] \n\ +1: pld [r0, #64] \n\ + pld [r0, #96] \n\ + pld [r1, #64] \n\ + pld [r1, #96] \n\ +2: ldrd r2, [r0], #8 \n\ + ldrd r4, [r0], #8 \n\ + mov ip, r1 \n\ + strd r2, [r1], #8 \n\ + ldrd r2, [r0], #8 \n\ + strd r4, [r1], #8 \n\ + ldrd r4, [r0], #8 \n\ + strd r2, [r1], #8 \n\ + strd r4, [r1], #8 \n\ + mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\ + ldrd r2, [r0], #8 \n\ + mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\ + ldrd r4, [r0], #8 \n\ + mov ip, r1 \n\ + strd r2, [r1], #8 \n\ + ldrd r2, [r0], #8 \n\ + strd r4, [r1], #8 \n\ + ldrd r4, [r0], #8 \n\ + strd r2, [r1], #8 \n\ + strd r4, [r1], #8 \n\ + mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\ + subs lr, lr, #1 \n\ + mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\ + bgt 1b \n\ + beq 2b \n\ + ldmfd sp!, {r4, r5, pc} " + : + : "r" (from), "r" (to), "I" (PAGE_SIZE / 64 - 1)); +} + +void xscale_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr) +{ + spin_lock(&minicache_lock); + + set_pte(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot)); + flush_tlb_kernel_page(COPYPAGE_MINICACHE); + + mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto); + + spin_unlock(&minicache_lock); +} + +/* + * XScale optimised clear_user_page + */ +void __attribute__((naked)) +xscale_mc_clear_user_page(void *kaddr, unsigned long vaddr) +{ + asm volatile( + "mov r1, %0 \n\ + mov r2, #0 \n\ + mov r3, #0 \n\ +1: mov ip, r0 \n\ + strd r2, [r0], #8 \n\ + strd r2, [r0], #8 \n\ + strd r2, [r0], #8 \n\ + strd r2, [r0], #8 \n\ + mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\ + subs r1, r1, #1 \n\ + mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\ + bne 1b \n\ + mov pc, lr" + : + : "I" (PAGE_SIZE / 32)); +} + +struct cpu_user_fns xscale_mc_user_fns __initdata = { + .cpu_clear_user_page = xscale_mc_clear_user_page, + .cpu_copy_user_page = xscale_mc_copy_user_page, +}; diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index 01967ddeef5..be4ab3d73c9 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -77,9 +77,8 @@ no_pmd: } static void -make_coherent(struct vm_area_struct *vma, unsigned long addr, struct page *page, int dirty) +make_coherent(struct address_space *mapping, struct vm_area_struct *vma, unsigned long addr, unsigned long pfn) { - struct address_space *mapping = page_mapping(page); struct mm_struct *mm = vma->vm_mm; struct vm_area_struct *mpnt; struct prio_tree_iter iter; @@ -87,9 +86,6 @@ make_coherent(struct vm_area_struct *vma, unsigned long addr, struct page *page, pgoff_t pgoff; int aliases = 0; - if (!mapping) - return; - pgoff = vma->vm_pgoff + ((addr - vma->vm_start) >> PAGE_SHIFT); /* @@ -115,9 +111,11 @@ make_coherent(struct vm_area_struct *vma, unsigned long addr, struct page *page, if (aliases) adjust_pte(vma, addr); else - flush_cache_page(vma, addr, page_to_pfn(page)); + flush_cache_page(vma, addr, pfn); } +void __flush_dcache_page(struct address_space *mapping, struct page *page); + /* * Take care of architecture specific things when placing a new PTE into * a page table, or changing an existing PTE. Basically, there are two @@ -134,29 +132,22 @@ make_coherent(struct vm_area_struct *vma, unsigned long addr, struct page *page, void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte) { unsigned long pfn = pte_pfn(pte); + struct address_space *mapping; struct page *page; if (!pfn_valid(pfn)) return; + page = pfn_to_page(pfn); - if (page_mapping(page)) { + mapping = page_mapping(page); + if (mapping) { int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags); - if (dirty) { - /* - * This is our first userspace mapping of this page. - * Ensure that the physical page is coherent with - * the kernel mapping. - * - * FIXME: only need to do this on VIVT and aliasing - * VIPT cache architectures. We can do that - * by choosing whether to set this bit... - */ - __cpuc_flush_dcache_page(page_address(page)); - } + if (dirty) + __flush_dcache_page(mapping, page); if (cache_is_vivt()) - make_coherent(vma, addr, page, dirty); + make_coherent(mapping, vma, addr, pfn); } } diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index c6de48d8950..191788fb18d 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -13,14 +13,32 @@ #include <asm/cacheflush.h> #include <asm/system.h> +#include <asm/tlbflush.h> -static void __flush_dcache_page(struct address_space *mapping, struct page *page) +#ifdef CONFIG_CPU_CACHE_VIPT +#define ALIAS_FLUSH_START 0xffff4000 + +#define TOP_PTE(x) pte_offset_kernel(top_pmd, x) + +static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) { - struct mm_struct *mm = current->active_mm; - struct vm_area_struct *mpnt; - struct prio_tree_iter iter; - pgoff_t pgoff; + unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT); + + set_pte(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL)); + flush_tlb_kernel_page(to); + asm( "mcrr p15, 0, %1, %0, c14\n" + " mcrr p15, 0, %1, %0, c5\n" + : + : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES) + : "cc"); +} +#else +#define flush_pfn_alias(pfn,vaddr) do { } while (0) +#endif + +void __flush_dcache_page(struct address_space *mapping, struct page *page) +{ /* * Writeback any data associated with the kernel mapping of this * page. This ensures that data in the physical page is mutually @@ -29,12 +47,21 @@ static void __flush_dcache_page(struct address_space *mapping, struct page *page __cpuc_flush_dcache_page(page_address(page)); /* - * If there's no mapping pointer here, then this page isn't - * visible to userspace yet, so there are no cache lines - * associated with any other aliases. + * If this is a page cache page, and we have an aliasing VIPT cache, + * we only need to do one flush - which would be at the relevant + * userspace colour, which is congruent with page->index. */ - if (!mapping) - return; + if (mapping && cache_is_vipt_aliasing()) + flush_pfn_alias(page_to_pfn(page), + page->index << PAGE_CACHE_SHIFT); +} + +static void __flush_dcache_aliases(struct address_space *mapping, struct page *page) +{ + struct mm_struct *mm = current->active_mm; + struct vm_area_struct *mpnt; + struct prio_tree_iter iter; + pgoff_t pgoff; /* * There are possible user space mappings of this page: @@ -57,8 +84,6 @@ static void __flush_dcache_page(struct address_space *mapping, struct page *page continue; offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT; flush_cache_page(mpnt, mpnt->vm_start + offset, page_to_pfn(page)); - if (cache_is_vipt()) - break; } flush_dcache_mmap_unlock(mapping); } @@ -83,12 +108,12 @@ void flush_dcache_page(struct page *page) { struct address_space *mapping = page_mapping(page); - if (cache_is_vipt_nonaliasing()) - return; - if (mapping && !mapping_mapped(mapping)) set_bit(PG_dcache_dirty, &page->flags); - else + else { __flush_dcache_page(mapping, page); + if (mapping && cache_is_vivt()) + __flush_dcache_aliases(mapping, page); + } } EXPORT_SYMBOL(flush_dcache_page); diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 00bb8fd37a5..7110e54182b 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -170,3 +170,50 @@ void __iounmap(void __iomem *addr) vfree((void *) (PAGE_MASK & (unsigned long) addr)); } EXPORT_SYMBOL(__iounmap); + +#ifdef __io +void __iomem *ioport_map(unsigned long port, unsigned int nr) +{ + return __io(port); +} +EXPORT_SYMBOL(ioport_map); + +void ioport_unmap(void __iomem *addr) +{ +} +EXPORT_SYMBOL(ioport_unmap); +#endif + +#ifdef CONFIG_PCI +#include <linux/pci.h> +#include <linux/ioport.h> + +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) +{ + unsigned long start = pci_resource_start(dev, bar); + unsigned long len = pci_resource_len(dev, bar); + unsigned long flags = pci_resource_flags(dev, bar); + + if (!len || !start) + return NULL; + if (maxlen && len > maxlen) + len = maxlen; + if (flags & IORESOURCE_IO) + return ioport_map(start, len); + if (flags & IORESOURCE_MEM) { + if (flags & IORESOURCE_CACHEABLE) + return ioremap(start, len); + return ioremap_nocache(start, len); + } + return NULL; +} +EXPORT_SYMBOL(pci_iomap); + +void pci_iounmap(struct pci_dev *dev, void __iomem *addr) +{ + if ((unsigned long)addr >= VMALLOC_START && + (unsigned long)addr < VMALLOC_END) + iounmap(addr); +} +EXPORT_SYMBOL(pci_iounmap); +#endif diff --git a/arch/arm/mm/minicache.c b/arch/arm/mm/minicache.c deleted file mode 100644 index dedf2ab01b2..00000000000 --- a/arch/arm/mm/minicache.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * linux/arch/arm/mm/minicache.c - * - * Copyright (C) 2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This handles the mini data cache, as found on SA11x0 and XScale - * processors. When we copy a user page page, we map it in such a way - * that accesses to this page will not touch the main data cache, but - * will be cached in the mini data cache. This prevents us thrashing - * the main data cache on page faults. - */ -#include <linux/init.h> -#include <linux/mm.h> - -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/tlbflush.h> - -/* - * 0xffff8000 to 0xffffffff is reserved for any ARM architecture - * specific hacks for copying pages efficiently. - */ -#define minicache_address (0xffff8000) -#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \ - L_PTE_CACHEABLE) - -static pte_t *minicache_pte; - -/* - * Note that this is intended to be called only from the copy_user_page - * asm code; anything else will require special locking to prevent the - * mini-cache space being re-used. (Note: probably preempt unsafe). - * - * We rely on the fact that the minicache is 2K, and we'll be pushing - * 4K of data through it, so we don't actually have to specifically - * flush the minicache when we change the mapping. - * - * Note also: assert(PAGE_OFFSET <= virt < high_memory). - * Unsafe: preempt, kmap. - */ -unsigned long map_page_minicache(unsigned long virt) -{ - set_pte(minicache_pte, pfn_pte(__pa(virt) >> PAGE_SHIFT, minicache_pgprot)); - flush_tlb_kernel_page(minicache_address); - - return minicache_address; -} - -static int __init minicache_init(void) -{ - pgd_t *pgd; - pmd_t *pmd; - - spin_lock(&init_mm.page_table_lock); - - pgd = pgd_offset_k(minicache_address); - pmd = pmd_alloc(&init_mm, pgd, minicache_address); - if (!pmd) - BUG(); - minicache_pte = pte_alloc_kernel(&init_mm, pmd, minicache_address); - if (!minicache_pte) - BUG(); - - spin_unlock(&init_mm.page_table_lock); - - return 0; -} - -core_initcall(minicache_init); diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index 585dfb8e20b..2c2b93d77d4 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -37,6 +37,8 @@ pgprot_t pgprot_kernel; EXPORT_SYMBOL(pgprot_kernel); +pmd_t *top_pmd; + struct cachepolicy { const char policy[16]; unsigned int cr_mask; @@ -142,6 +144,16 @@ __setup("noalign", noalign_setup); #define FIRST_KERNEL_PGD_NR (FIRST_USER_PGD_NR + USER_PTRS_PER_PGD) +static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt) +{ + return pmd_offset(pgd, virt); +} + +static inline pmd_t *pmd_off_k(unsigned long virt) +{ + return pmd_off(pgd_offset_k(virt), virt); +} + /* * need to get a 16k page for level 1 */ @@ -220,7 +232,7 @@ void free_pgd_slow(pgd_t *pgd) return; /* pgd is always present and good */ - pmd = (pmd_t *)pgd; + pmd = pmd_off(pgd, 0); if (pmd_none(*pmd)) goto free; if (pmd_bad(*pmd)) { @@ -246,9 +258,8 @@ free: static inline void alloc_init_section(unsigned long virt, unsigned long phys, int prot) { - pmd_t *pmdp; + pmd_t *pmdp = pmd_off_k(virt); - pmdp = pmd_offset(pgd_offset_k(virt), virt); if (virt & (1 << 20)) pmdp++; @@ -283,11 +294,9 @@ alloc_init_supersection(unsigned long virt, unsigned long phys, int prot) static inline void alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pgprot_t prot) { - pmd_t *pmdp; + pmd_t *pmdp = pmd_off_k(virt); pte_t *ptep; - pmdp = pmd_offset(pgd_offset_k(virt), virt); - if (pmd_none(*pmdp)) { unsigned long pmdval; ptep = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * @@ -310,7 +319,7 @@ alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pg */ static inline void clear_mapping(unsigned long virt) { - pmd_clear(pmd_offset(pgd_offset_k(virt), virt)); + pmd_clear(pmd_off_k(virt)); } struct mem_types { @@ -578,7 +587,7 @@ void setup_mm_for_reboot(char mode) PMD_TYPE_SECT; if (cpu_arch <= CPU_ARCH_ARMv5) pmdval |= PMD_BIT4; - pmd = pmd_offset(pgd + i, i << PGDIR_SHIFT); + pmd = pmd_off(pgd, i << PGDIR_SHIFT); pmd[0] = __pmd(pmdval); pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1))); flush_pmd_entry(pmd); @@ -675,6 +684,8 @@ void __init memtable_init(struct meminfo *mi) flush_cache_all(); flush_tlb_all(); + + top_pmd = pmd_off_k(0xffff0000); } /* diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 32c4b0e35b3..3de7f84b53c 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -73,7 +73,12 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, (!vma || addr + len <= vma->vm_start)) return addr; } - start_addr = addr = mm->free_area_cache; + if (len > mm->cached_hole_size) { + start_addr = addr = mm->free_area_cache; + } else { + start_addr = addr = TASK_UNMAPPED_BASE; + mm->cached_hole_size = 0; + } full_search: if (do_align) @@ -90,6 +95,7 @@ full_search: */ if (start_addr != TASK_UNMAPPED_BASE) { start_addr = addr = TASK_UNMAPPED_BASE; + mm->cached_hole_size = 0; goto full_search; } return -ENOMEM; @@ -101,6 +107,8 @@ full_search: mm->free_area_cache = addr + len; return addr; } + if (addr + mm->cached_hole_size < vma->vm_start) + mm->cached_hole_size = vma->vm_start - addr; addr = vma->vm_end; if (do_align) addr = COLOUR_ALIGN(addr, pgoff); diff --git a/arch/arm26/kernel/ecard.c b/arch/arm26/kernel/ecard.c index 824c6b571ad..f2278aadac8 100644 --- a/arch/arm26/kernel/ecard.c +++ b/arch/arm26/kernel/ecard.c @@ -562,31 +562,31 @@ static void __init ecard_init_resources(struct expansion_card *ec) } } -static ssize_t ecard_show_irq(struct device *dev, char *buf) +static ssize_t ecard_show_irq(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%u\n", ec->irq); } -static ssize_t ecard_show_vendor(struct device *dev, char *buf) +static ssize_t ecard_show_vendor(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%u\n", ec->cid.manufacturer); } -static ssize_t ecard_show_device(struct device *dev, char *buf) +static ssize_t ecard_show_device(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%u\n", ec->cid.product); } -static ssize_t ecard_show_dma(struct device *dev, char *buf) +static ssize_t ecard_show_dma(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%u\n", ec->dma); } -static ssize_t ecard_show_resources(struct device *dev, char *buf) +static ssize_t ecard_show_resources(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); char *str = buf; diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c index 41958f57c83..79433159b5f 100644 --- a/arch/frv/mm/init.c +++ b/arch/frv/mm/init.c @@ -169,7 +169,6 @@ void __init mem_init(void) struct page *page = &mem_map[pfn]; ClearPageReserved(page); - set_bit(PG_highmem, &page->flags); set_page_count(page, 1); __free_page(page); totalram_pages++; diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c index 134aec1c6d1..b5f83e9f04d 100644 --- a/arch/h8300/kernel/process.c +++ b/arch/h8300/kernel/process.c @@ -54,7 +54,7 @@ asmlinkage void ret_from_fork(void); void default_idle(void) { while(1) { - if (need_resched()) { + if (!need_resched()) { local_irq_enable(); __asm__("sleep"); local_irq_disable(); diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index e382f32d435..dfd904f6883 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -1163,7 +1163,7 @@ config PCI_DIRECT config PCI_MMCONFIG bool - depends on PCI && (PCI_GOMMCONFIG || (PCI_GOANY && ACPI)) + depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY) select ACPI_BOOT default y diff --git a/arch/i386/boot/Makefile b/arch/i386/boot/Makefile index aa7064a75ee..43cd6220ee4 100644 --- a/arch/i386/boot/Makefile +++ b/arch/i386/boot/Makefile @@ -48,7 +48,7 @@ cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/bootsect $(obj)/setup \ $(obj)/zImage $(obj)/bzImage: $(obj)/bootsect $(obj)/setup \ $(obj)/vmlinux.bin $(obj)/tools/build FORCE $(call if_changed,image) - @echo 'Kernel: $@ is ready' + @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' $(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE $(call if_changed,objcopy) diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 0fbcfe00dd8..51ecd512603 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -43,7 +43,7 @@ obj-$(CONFIG_SCx200) += scx200.o # Note: kbuild does not track this dependency due to usage of .incbin $(obj)/vsyscall.o: $(obj)/vsyscall-int80.so $(obj)/vsyscall-sysenter.so targets += $(foreach F,int80 sysenter,vsyscall-$F.o vsyscall-$F.so) -targets += vsyscall.lds +targets += vsyscall-note.o vsyscall.lds # The DSO images are built using a special linker script. quiet_cmd_syscall = SYSCALL $@ diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c index 45641a87255..0ff65abcd56 100644 --- a/arch/i386/kernel/apm.c +++ b/arch/i386/kernel/apm.c @@ -1222,6 +1222,7 @@ static int suspend(int vetoable) save_processor_state(); err = set_system_power_state(APM_STATE_SUSPEND); + ignore_normal_resume = 1; restore_processor_state(); local_irq_disable(); @@ -1229,7 +1230,6 @@ static int suspend(int vetoable) spin_lock(&i8253_lock); reinit_timer(); set_time(); - ignore_normal_resume = 1; spin_unlock(&i8253_lock); write_sequnlock(&xtime_lock); diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c index 16dbc4151be..73aeaf5a9d4 100644 --- a/arch/i386/kernel/cpu/amd.c +++ b/arch/i386/kernel/cpu/amd.c @@ -24,9 +24,6 @@ __asm__(".align 4\nvide: ret"); static void __init init_amd(struct cpuinfo_x86 *c) { -#ifdef CONFIG_X86_SMP - int cpu = c == &boot_cpu_data ? 0 : c - cpu_data; -#endif u32 l, h; int mbytes = num_physpages >> (20-PAGE_SHIFT); int r; @@ -198,14 +195,19 @@ static void __init init_amd(struct cpuinfo_x86 *c) c->x86_num_cores = 1; } -#ifdef CONFIG_X86_SMP +#ifdef CONFIG_X86_HT /* * On a AMD dual core setup the lower bits of the APIC id * distingush the cores. Assumes number of cores is a power * of two. */ if (c->x86_num_cores > 1) { - cpu_core_id[cpu] = cpu >> hweight32(c->x86_num_cores - 1); + int cpu = smp_processor_id(); + unsigned bits = 0; + while ((1 << bits) < c->x86_num_cores) + bits++; + cpu_core_id[cpu] = phys_proc_id[cpu] & ((1<<bits)-1); + phys_proc_id[cpu] >>= bits; printk(KERN_INFO "CPU %d(%d) -> Core %d\n", cpu, c->x86_num_cores, cpu_core_id[cpu]); } diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 6be0310e3cd..d199e525680 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -243,6 +243,10 @@ static void __init early_cpu_detect(void) } early_intel_workaround(c); + +#ifdef CONFIG_X86_HT + phys_proc_id[smp_processor_id()] = (cpuid_ebx(1) >> 24) & 0xff; +#endif } void __init generic_identify(struct cpuinfo_x86 * c) diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig index f25ffd74235..0f1eb507233 100644 --- a/arch/i386/kernel/cpu/cpufreq/Kconfig +++ b/arch/i386/kernel/cpu/cpufreq/Kconfig @@ -23,7 +23,7 @@ config X86_ACPI_CPUFREQ If in doubt, say N. config ELAN_CPUFREQ - tristate "AMD Elan" + tristate "AMD Elan SC400 and SC410" select CPU_FREQ_TABLE depends on X86_ELAN ---help--- @@ -38,6 +38,18 @@ config ELAN_CPUFREQ If in doubt, say N. +config SC520_CPUFREQ + tristate "AMD Elan SC520" + select CPU_FREQ_TABLE + depends on X86_ELAN + ---help--- + This adds the CPUFreq driver for AMD Elan SC520 processor. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + + config X86_POWERNOW_K6 tristate "AMD Mobile K6-2/K6-3 PowerNow!" select CPU_FREQ_TABLE diff --git a/arch/i386/kernel/cpu/cpufreq/Makefile b/arch/i386/kernel/cpu/cpufreq/Makefile index a922e97aeed..2e894f1c891 100644 --- a/arch/i386/kernel/cpu/cpufreq/Makefile +++ b/arch/i386/kernel/cpu/cpufreq/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o obj-$(CONFIG_X86_LONGHAUL) += longhaul.o obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o +obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o obj-$(CONFIG_X86_LONGRUN) += longrun.o obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index ab0f9f5aac1..04e3563da4f 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -29,6 +29,7 @@ #include <linux/cpufreq.h> #include <linux/slab.h> #include <linux/string.h> +#include <linux/pci.h> #include <asm/msr.h> #include <asm/timex.h> @@ -119,7 +120,13 @@ static int longhaul_get_cpu_mult(void) static void do_powersaver(union msr_longhaul *longhaul, unsigned int clock_ratio_index) { + struct pci_dev *dev; + unsigned long flags; + unsigned int tmp_mask; int version; + int i; + u16 pci_cmd; + u16 cmd_state[64]; switch (cpu_model) { case CPU_EZRA_T: @@ -137,17 +144,58 @@ static void do_powersaver(union msr_longhaul *longhaul, longhaul->bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4; longhaul->bits.EnableSoftBusRatio = 1; longhaul->bits.RevisionKey = 0; - local_irq_disable(); - wrmsrl(MSR_VIA_LONGHAUL, longhaul->val); + + preempt_disable(); + local_irq_save(flags); + + /* + * get current pci bus master state for all devices + * and clear bus master bit + */ + dev = NULL; + i = 0; + do { + dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev); + if (dev != NULL) { + pci_read_config_word(dev, PCI_COMMAND, &pci_cmd); + cmd_state[i++] = pci_cmd; + pci_cmd &= ~PCI_COMMAND_MASTER; + pci_write_config_word(dev, PCI_COMMAND, pci_cmd); + } + } while (dev != NULL); + + tmp_mask=inb(0x21); /* works on C3. save mask. */ + outb(0xFE,0x21); /* TMR0 only */ + outb(0xFF,0x80); /* delay */ + local_irq_enable(); + + __hlt(); + wrmsrl(MSR_VIA_LONGHAUL, longhaul->val); __hlt(); + local_irq_disable(); + + outb(tmp_mask,0x21); /* restore mask */ + + /* restore pci bus master state for all devices */ + dev = NULL; + i = 0; + do { + dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev); + if (dev != NULL) { + pci_cmd = cmd_state[i++]; + pci_write_config_byte(dev, PCI_COMMAND, pci_cmd); + } + } while (dev != NULL); + local_irq_restore(flags); + preempt_enable(); + + /* disable bus ratio bit */ rdmsrl(MSR_VIA_LONGHAUL, longhaul->val); longhaul->bits.EnableSoftBusRatio = 0; longhaul->bits.RevisionKey = version; - local_irq_disable(); wrmsrl(MSR_VIA_LONGHAUL, longhaul->val); - local_irq_enable(); } /** @@ -578,7 +626,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) longhaul_setup_voltagescaling(); policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cpuinfo.transition_latency = 200000; /* nsec */ policy->cur = calc_speed(longhaul_get_cpu_mult()); ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table); diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c index 913f652623d..5c530064eb7 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c @@ -23,6 +23,7 @@ #include <linux/dmi.h> #include <asm/msr.h> +#include <asm/timer.h> #include <asm/timex.h> #include <asm/io.h> #include <asm/system.h> @@ -586,13 +587,17 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy) rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val); - /* A K7 with powernow technology is set to max frequency by BIOS */ - fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.MFID]; + /* recalibrate cpu_khz */ + result = recalibrate_cpu_khz(); + if (result) + return result; + + fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID]; if (!fsb) { printk(KERN_WARNING PFX "can not determine bus frequency\n"); return -EINVAL; } - dprintk("FSB: %3d.%03d MHz\n", fsb/1000, fsb%1000); + dprintk("FSB: %3dMHz\n", fsb/1000); if (dmi_check_system(powernow_dmi_table) || acpi_force) { printk (KERN_INFO PFX "PSB/PST known to be broken. Trying ACPI instead\n"); diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index a65ff7e32e5..10cc096c0ad 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -4,7 +4,7 @@ * GNU general public license version 2. See "COPYING" or * http://www.gnu.org/licenses/gpl.html * - * Support : paul.devriendt@amd.com + * Support : mark.langsdorf@amd.com * * Based on the powernow-k7.c module written by Dave Jones. * (C) 2003 Dave Jones <davej@codemonkey.org.uk> on behalf of SuSE Labs @@ -15,12 +15,13 @@ * * Valuable input gratefully received from Dave Jones, Pavel Machek, * Dominik Brodowski, and others. + * Originally developed by Paul Devriendt. * Processor information obtained from Chapter 9 (Power and Thermal Management) * of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD * Opteron Processors" available for download from www.amd.com * * Tables for specific CPUs can be infrerred from - * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf + * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf */ #include <linux/kernel.h> @@ -30,6 +31,7 @@ #include <linux/cpufreq.h> #include <linux/slab.h> #include <linux/string.h> +#include <linux/cpumask.h> #include <asm/msr.h> #include <asm/io.h> @@ -42,7 +44,7 @@ #define PFX "powernow-k8: " #define BFX PFX "BIOS error: " -#define VERSION "version 1.00.09e" +#define VERSION "version 1.40.2" #include "powernow-k8.h" /* serialize freq changes */ @@ -50,6 +52,10 @@ static DECLARE_MUTEX(fidvid_sem); static struct powernow_k8_data *powernow_data[NR_CPUS]; +#ifndef CONFIG_SMP +static cpumask_t cpu_core_map[1]; +#endif + /* Return a frequency in MHz, given an input fid */ static u32 find_freq_from_fid(u32 fid) { @@ -274,11 +280,18 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid { u32 rvosteps = data->rvo; u32 savefid = data->currfid; + u32 maxvid, lo; dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n", smp_processor_id(), data->currfid, data->currvid, reqvid, data->rvo); + rdmsr(MSR_FIDVID_STATUS, lo, maxvid); + maxvid = 0x1f & (maxvid >> 16); + dprintk("ph1 maxvid=0x%x\n", maxvid); + if (reqvid < maxvid) /* lower numbers are higher voltages */ + reqvid = maxvid; + while (data->currvid > reqvid) { dprintk("ph1: curr 0x%x, req vid 0x%x\n", data->currvid, reqvid); @@ -286,8 +299,8 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid return 1; } - while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) { - if (data->currvid == 0) { + while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) { + if (data->currvid == maxvid) { rvosteps = 0; } else { dprintk("ph1: changing vid for rvo, req 0x%x\n", @@ -671,7 +684,7 @@ static int find_psb_table(struct powernow_k8_data *data) * BIOS and Kernel Developer's Guide, which is available on * www.amd.com */ - printk(KERN_ERR PFX "BIOS error - no PSB\n"); + printk(KERN_INFO PFX "BIOS error - no PSB or ACPI _PSS objects\n"); return -ENODEV; } @@ -695,7 +708,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) struct cpufreq_frequency_table *powernow_table; if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) { - dprintk("register performance failed\n"); + dprintk("register performance failed: bad ACPI data\n"); return -EIO; } @@ -746,22 +759,23 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) continue; } - if (fid < HI_FID_TABLE_BOTTOM) { - if (cntlofreq) { - /* if both entries are the same, ignore this - * one... - */ - if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) || - (powernow_table[i].index != powernow_table[cntlofreq].index)) { - printk(KERN_ERR PFX "Too many lo freq table entries\n"); - goto err_out_mem; - } - - dprintk("double low frequency table entry, ignoring it.\n"); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; - continue; - } else - cntlofreq = i; + /* verify only 1 entry from the lo frequency table */ + if (fid < HI_FID_TABLE_BOTTOM) { + if (cntlofreq) { + /* if both entries are the same, ignore this + * one... + */ + if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) || + (powernow_table[i].index != powernow_table[cntlofreq].index)) { + printk(KERN_ERR PFX "Too many lo freq table entries\n"); + goto err_out_mem; + } + + dprintk("double low frequency table entry, ignoring it.\n"); + powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + continue; + } else + cntlofreq = i; } if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) { @@ -816,7 +830,7 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde { u32 fid; u32 vid; - int res; + int res, i; struct cpufreq_freqs freqs; dprintk("cpu %d transition to index %u\n", smp_processor_id(), index); @@ -841,7 +855,8 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde } if ((fid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) { - printk("ignoring illegal change in lo freq table-%x to 0x%x\n", + printk(KERN_ERR PFX + "ignoring illegal change in lo freq table-%x to 0x%x\n", data->currfid, fid); return 1; } @@ -850,18 +865,20 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde smp_processor_id(), fid, vid); freqs.cpu = data->cpu; - freqs.old = find_khz_freq_from_fid(data->currfid); freqs.new = find_khz_freq_from_fid(fid); - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + for_each_cpu_mask(i, cpu_core_map[data->cpu]) { + freqs.cpu = i; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + } - down(&fidvid_sem); res = transition_fid_vid(data, fid, vid); - up(&fidvid_sem); freqs.new = find_khz_freq_from_fid(data->currfid); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - + for_each_cpu_mask(i, cpu_core_map[data->cpu]) { + freqs.cpu = i; + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + } return res; } @@ -874,6 +891,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi u32 checkvid = data->currvid; unsigned int newstate; int ret = -EIO; + int i; /* only run on specific CPU from here on */ oldmask = current->cpus_allowed; @@ -902,22 +920,41 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi data->currfid, data->currvid); if ((checkvid != data->currvid) || (checkfid != data->currfid)) { - printk(KERN_ERR PFX - "error - out of sync, fid 0x%x 0x%x, vid 0x%x 0x%x\n", - checkfid, data->currfid, checkvid, data->currvid); + printk(KERN_INFO PFX + "error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n", + checkfid, data->currfid, checkvid, data->currvid); } if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate)) goto err_out; + down(&fidvid_sem); + + for_each_cpu_mask(i, cpu_core_map[pol->cpu]) { + /* make sure the sibling is initialized */ + if (!powernow_data[i]) { + ret = 0; + up(&fidvid_sem); + goto err_out; + } + } + powernow_k8_acpi_pst_values(data, newstate); if (transition_frequency(data, newstate)) { printk(KERN_ERR PFX "transition frequency failed\n"); ret = 1; + up(&fidvid_sem); goto err_out; } + /* Update all the fid/vids of our siblings */ + for_each_cpu_mask(i, cpu_core_map[pol->cpu]) { + powernow_data[i]->currvid = data->currvid; + powernow_data[i]->currfid = data->currfid; + } + up(&fidvid_sem); + pol->cur = find_khz_freq_from_fid(data->currfid); ret = 0; @@ -962,7 +999,7 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol) */ if ((num_online_cpus() != 1) || (num_possible_cpus() != 1)) { - printk(KERN_INFO PFX "MP systems not supported by PSB BIOS structure\n"); + printk(KERN_ERR PFX "MP systems not supported by PSB BIOS structure\n"); kfree(data); return -ENODEV; } @@ -1003,6 +1040,7 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol) schedule(); pol->governor = CPUFREQ_DEFAULT_GOVERNOR; + pol->cpus = cpu_core_map[pol->cpu]; /* Take a crude guess here. * That guess was in microseconds, so multiply with 1000 */ @@ -1069,7 +1107,7 @@ static unsigned int powernowk8_get (unsigned int cpu) return 0; } preempt_disable(); - + if (query_current_values_with_pending_wait(data)) goto out; @@ -1127,9 +1165,10 @@ static void __exit powernowk8_exit(void) cpufreq_unregister_driver(&cpufreq_amd64_driver); } -MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com>"); +MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com."); MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver."); MODULE_LICENSE("GPL"); late_initcall(powernowk8_init); module_exit(powernowk8_exit); + diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h index 63ebc8470f5..9ed5bf221cb 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h @@ -174,3 +174,18 @@ static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvi static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid); static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index); + +#ifndef for_each_cpu_mask +#define for_each_cpu_mask(i,mask) for (i=0;i<1;i++) +#endif + +#ifdef CONFIG_SMP +static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[]) +{ +} +#else +static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[]) +{ + cpu_set(0, cpu_sharedcore_mask[0]); +} +#endif diff --git a/arch/i386/kernel/cpu/cpufreq/sc520_freq.c b/arch/i386/kernel/cpu/cpufreq/sc520_freq.c new file mode 100644 index 00000000000..ef457d50f4a --- /dev/null +++ b/arch/i386/kernel/cpu/cpufreq/sc520_freq.c @@ -0,0 +1,186 @@ +/* + * sc520_freq.c: cpufreq driver for the AMD Elan sc520 + * + * Copyright (C) 2005 Sean Young <sean@mess.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Based on elanfreq.c + * + * 2005-03-30: - initial revision + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> + +#include <linux/delay.h> +#include <linux/cpufreq.h> + +#include <asm/msr.h> +#include <asm/timex.h> +#include <asm/io.h> + +#define MMCR_BASE 0xfffef000 /* The default base address */ +#define OFFS_CPUCTL 0x2 /* CPU Control Register */ + +static __u8 __iomem *cpuctl; + +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "sc520_freq", msg) + +static struct cpufreq_frequency_table sc520_freq_table[] = { + {0x01, 100000}, + {0x02, 133000}, + {0, CPUFREQ_TABLE_END}, +}; + +static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) +{ + u8 clockspeed_reg = *cpuctl; + + switch (clockspeed_reg & 0x03) { + default: + printk(KERN_ERR "sc520_freq: error: cpuctl register has unexpected value %02x\n", clockspeed_reg); + case 0x01: + return 100000; + case 0x02: + return 133000; + } +} + +static void sc520_freq_set_cpu_state (unsigned int state) +{ + + struct cpufreq_freqs freqs; + u8 clockspeed_reg; + + freqs.old = sc520_freq_get_cpu_frequency(0); + freqs.new = sc520_freq_table[state].frequency; + freqs.cpu = 0; /* AMD Elan is UP */ + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + dprintk("attempting to set frequency to %i kHz\n", + sc520_freq_table[state].frequency); + + local_irq_disable(); + + clockspeed_reg = *cpuctl & ~0x03; + *cpuctl = clockspeed_reg | sc520_freq_table[state].index; + + local_irq_enable(); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); +}; + +static int sc520_freq_verify (struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]); +} + +static int sc520_freq_target (struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int newstate = 0; + + if (cpufreq_frequency_table_target(policy, sc520_freq_table, target_freq, relation, &newstate)) + return -EINVAL; + + sc520_freq_set_cpu_state(newstate); + + return 0; +} + + +/* + * Module init and exit code + */ + +static int sc520_freq_cpu_init(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *c = cpu_data; + int result; + + /* capability check */ + if (c->x86_vendor != X86_VENDOR_AMD || + c->x86 != 4 || c->x86_model != 9) + return -ENODEV; + + /* cpuinfo and default policy values */ + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = 1000000; /* 1ms */ + policy->cur = sc520_freq_get_cpu_frequency(0); + + result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table); + if (result) + return (result); + + cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu); + + return 0; +} + + +static int sc520_freq_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + + +static struct freq_attr* sc520_freq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + + +static struct cpufreq_driver sc520_freq_driver = { + .get = sc520_freq_get_cpu_frequency, + .verify = sc520_freq_verify, + .target = sc520_freq_target, + .init = sc520_freq_cpu_init, + .exit = sc520_freq_cpu_exit, + .name = "sc520_freq", + .owner = THIS_MODULE, + .attr = sc520_freq_attr, +}; + + +static int __init sc520_freq_init(void) +{ + struct cpuinfo_x86 *c = cpu_data; + + /* Test if we have the right hardware */ + if(c->x86_vendor != X86_VENDOR_AMD || + c->x86 != 4 || c->x86_model != 9) { + dprintk("no Elan SC520 processor found!\n"); + return -ENODEV; + } + cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1); + if(!cpuctl) { + printk(KERN_ERR "sc520_freq: error: failed to remap memory\n"); + return -ENOMEM; + } + + return cpufreq_register_driver(&sc520_freq_driver); +} + + +static void __exit sc520_freq_exit(void) +{ + cpufreq_unregister_driver(&sc520_freq_driver); + iounmap(cpuctl); +} + + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Sean Young <sean@mess.org>"); +MODULE_DESCRIPTION("cpufreq driver for AMD's Elan sc520 CPU"); + +module_init(sc520_freq_init); +module_exit(sc520_freq_exit); + diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index 07d5612dc00..7dcbf70fc16 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -54,6 +54,8 @@ enum { CPU_DOTHAN_A1, CPU_DOTHAN_A2, CPU_DOTHAN_B0, + CPU_MP4HT_D0, + CPU_MP4HT_E0, }; static const struct cpu_id cpu_ids[] = { @@ -61,6 +63,8 @@ static const struct cpu_id cpu_ids[] = { [CPU_DOTHAN_A1] = { 6, 13, 1 }, [CPU_DOTHAN_A2] = { 6, 13, 2 }, [CPU_DOTHAN_B0] = { 6, 13, 6 }, + [CPU_MP4HT_D0] = {15, 3, 4 }, + [CPU_MP4HT_E0] = {15, 4, 1 }, }; #define N_IDS (sizeof(cpu_ids)/sizeof(cpu_ids[0])) @@ -226,6 +230,8 @@ static struct cpu_model models[] = { &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL }, { &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL }, { &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL }, + { &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL }, + { &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL }, { NULL, } }; diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c index 8ba430a9c3a..d368b3f5fce 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c @@ -336,7 +336,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, if (!prev_speed) return -EIO; - dprintk("previous seped is %u\n", prev_speed); + dprintk("previous speed is %u\n", prev_speed); local_irq_save(flags); @@ -348,7 +348,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, goto out; } - dprintk("low seped is %u\n", *low_speed); + dprintk("low speed is %u\n", *low_speed); /* switch to high state */ set_state(SPEEDSTEP_HIGH); @@ -358,7 +358,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, goto out; } - dprintk("high seped is %u\n", *high_speed); + dprintk("high speed is %u\n", *high_speed); if (*low_speed == *high_speed) { ret = -ENODEV; diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c index 79440b3f087..b25fb6b635a 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c @@ -357,6 +357,9 @@ static int __init speedstep_init(void) case SPEEDSTEP_PROCESSOR_PIII_C: case SPEEDSTEP_PROCESSOR_PIII_C_EARLY: break; + case SPEEDSTEP_PROCESSOR_P4M: + printk(KERN_INFO "speedstep-smi: you're trying to use this cpufreq driver on a Pentium 4-based CPU. Most likely it will not work.\n"); + break; default: speedstep_processor = 0; } diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c index aeb5b4ef8c8..a710dc4eb20 100644 --- a/arch/i386/kernel/cpu/intel_cacheinfo.c +++ b/arch/i386/kernel/cpu/intel_cacheinfo.c @@ -118,7 +118,7 @@ struct _cpuid4_info { }; #define MAX_CACHE_LEAVES 4 -static unsigned short __devinitdata num_cache_leaves; +static unsigned short num_cache_leaves; static int __devinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf) { diff --git a/arch/i386/kernel/cpuid.c b/arch/i386/kernel/cpuid.c index 2e2756345bb..4647db4ad6d 100644 --- a/arch/i386/kernel/cpuid.c +++ b/arch/i386/kernel/cpuid.c @@ -45,7 +45,7 @@ #include <asm/uaccess.h> #include <asm/system.h> -static struct class_simple *cpuid_class; +static struct class *cpuid_class; #ifdef CONFIG_SMP @@ -158,12 +158,12 @@ static struct file_operations cpuid_fops = { .open = cpuid_open, }; -static int cpuid_class_simple_device_add(int i) +static int cpuid_class_device_create(int i) { int err = 0; struct class_device *class_err; - class_err = class_simple_device_add(cpuid_class, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i); + class_err = class_device_create(cpuid_class, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i); if (IS_ERR(class_err)) err = PTR_ERR(class_err); return err; @@ -175,10 +175,10 @@ static int __devinit cpuid_class_cpu_callback(struct notifier_block *nfb, unsign switch (action) { case CPU_ONLINE: - cpuid_class_simple_device_add(cpu); + cpuid_class_device_create(cpu); break; case CPU_DEAD: - class_simple_device_remove(MKDEV(CPUID_MAJOR, cpu)); + class_device_destroy(cpuid_class, MKDEV(CPUID_MAJOR, cpu)); break; } return NOTIFY_OK; @@ -200,13 +200,13 @@ static int __init cpuid_init(void) err = -EBUSY; goto out; } - cpuid_class = class_simple_create(THIS_MODULE, "cpuid"); + cpuid_class = class_create(THIS_MODULE, "cpuid"); if (IS_ERR(cpuid_class)) { err = PTR_ERR(cpuid_class); goto out_chrdev; } for_each_online_cpu(i) { - err = cpuid_class_simple_device_add(i); + err = cpuid_class_device_create(i); if (err != 0) goto out_class; } @@ -218,9 +218,9 @@ static int __init cpuid_init(void) out_class: i = 0; for_each_online_cpu(i) { - class_simple_device_remove(MKDEV(CPUID_MAJOR, i)); + class_device_destroy(cpuid_class, MKDEV(CPUID_MAJOR, i)); } - class_simple_destroy(cpuid_class); + class_destroy(cpuid_class); out_chrdev: unregister_chrdev(CPUID_MAJOR, "cpu/cpuid"); out: @@ -232,8 +232,8 @@ static void __exit cpuid_exit(void) int cpu = 0; for_each_online_cpu(cpu) - class_simple_device_remove(MKDEV(CPUID_MAJOR, cpu)); - class_simple_destroy(cpuid_class); + class_device_destroy(cpuid_class, MKDEV(CPUID_MAJOR, cpu)); + class_destroy(cpuid_class); unregister_chrdev(CPUID_MAJOR, "cpu/cpuid"); unregister_cpu_notifier(&cpuid_class_cpu_notifier); } diff --git a/arch/i386/kernel/msr.c b/arch/i386/kernel/msr.c index 05d9f8f363a..b2f03c39a6f 100644 --- a/arch/i386/kernel/msr.c +++ b/arch/i386/kernel/msr.c @@ -44,7 +44,7 @@ #include <asm/uaccess.h> #include <asm/system.h> -static struct class_simple *msr_class; +static struct class *msr_class; /* Note: "err" is handled in a funny way below. Otherwise one version of gcc or another breaks. */ @@ -260,12 +260,12 @@ static struct file_operations msr_fops = { .open = msr_open, }; -static int msr_class_simple_device_add(int i) +static int msr_class_device_create(int i) { int err = 0; struct class_device *class_err; - class_err = class_simple_device_add(msr_class, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i); + class_err = class_device_create(msr_class, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i); if (IS_ERR(class_err)) err = PTR_ERR(class_err); return err; @@ -277,10 +277,10 @@ static int __devinit msr_class_cpu_callback(struct notifier_block *nfb, unsigned switch (action) { case CPU_ONLINE: - msr_class_simple_device_add(cpu); + msr_class_device_create(cpu); break; case CPU_DEAD: - class_simple_device_remove(MKDEV(MSR_MAJOR, cpu)); + class_device_destroy(msr_class, MKDEV(MSR_MAJOR, cpu)); break; } return NOTIFY_OK; @@ -302,13 +302,13 @@ static int __init msr_init(void) err = -EBUSY; goto out; } - msr_class = class_simple_create(THIS_MODULE, "msr"); + msr_class = class_create(THIS_MODULE, "msr"); if (IS_ERR(msr_class)) { err = PTR_ERR(msr_class); goto out_chrdev; } for_each_online_cpu(i) { - err = msr_class_simple_device_add(i); + err = msr_class_device_create(i); if (err != 0) goto out_class; } @@ -320,8 +320,8 @@ static int __init msr_init(void) out_class: i = 0; for_each_online_cpu(i) - class_simple_device_remove(MKDEV(MSR_MAJOR, i)); - class_simple_destroy(msr_class); + class_device_destroy(msr_class, MKDEV(MSR_MAJOR, i)); + class_destroy(msr_class); out_chrdev: unregister_chrdev(MSR_MAJOR, "cpu/msr"); out: @@ -332,8 +332,8 @@ static void __exit msr_exit(void) { int cpu = 0; for_each_online_cpu(cpu) - class_simple_device_remove(MKDEV(MSR_MAJOR, cpu)); - class_simple_destroy(msr_class); + class_device_destroy(msr_class, MKDEV(MSR_MAJOR, cpu)); + class_destroy(msr_class); unregister_chrdev(MSR_MAJOR, "cpu/msr"); unregister_cpu_notifier(&msr_class_cpu_notifier); } diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 945ec73163c..2bfbddebdbf 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -1502,11 +1502,13 @@ void __init setup_arch(char **cmdline_p) if (efi_enabled) efi_map_memmap(); +#ifdef CONFIG_ACPI_BOOT /* * Parse the ACPI tables for possible boot-time SMP configuration. */ acpi_boot_table_init(); acpi_boot_init(); +#endif #ifdef CONFIG_X86_LOCAL_APIC if (smp_found_config) diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index cbea7ac582e..bc1bb6919e6 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -888,6 +888,7 @@ void *xquad_portio; cpumask_t cpu_sibling_map[NR_CPUS] __cacheline_aligned; cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned; +EXPORT_SYMBOL(cpu_core_map); static void __init smp_boot_cpus(unsigned int max_cpus) { @@ -1073,8 +1074,10 @@ static void __init smp_boot_cpus(unsigned int max_cpus) cpu_set(cpu, cpu_sibling_map[cpu]); } - if (siblings != smp_num_siblings) + if (siblings != smp_num_siblings) { printk(KERN_WARNING "WARNING: %d siblings found for CPU%d, should be %d\n", siblings, cpu, smp_num_siblings); + smp_num_siblings = siblings; + } if (c->x86_num_cores > 1) { for (i = 0; i < NR_CPUS; i++) { diff --git a/arch/i386/kernel/syscall_table.S b/arch/i386/kernel/syscall_table.S index 6cd1ed311f0..d408afaf649 100644 --- a/arch/i386/kernel/syscall_table.S +++ b/arch/i386/kernel/syscall_table.S @@ -251,7 +251,7 @@ ENTRY(sys_call_table) .long sys_io_submit .long sys_io_cancel .long sys_fadvise64 /* 250 */ - .long sys_ni_syscall + .long sys_set_zone_reclaim .long sys_exit_group .long sys_lookup_dcookie .long sys_epoll_create diff --git a/arch/i386/kernel/timers/common.c b/arch/i386/kernel/timers/common.c index f7f90005e22..8e201219f52 100644 --- a/arch/i386/kernel/timers/common.c +++ b/arch/i386/kernel/timers/common.c @@ -6,6 +6,7 @@ #include <linux/timex.h> #include <linux/errno.h> #include <linux/jiffies.h> +#include <linux/module.h> #include <asm/io.h> #include <asm/timer.h> @@ -24,7 +25,7 @@ #define CALIBRATE_TIME (5 * 1000020/HZ) -unsigned long __init calibrate_tsc(void) +unsigned long calibrate_tsc(void) { mach_prepare_counter(); @@ -139,7 +140,7 @@ bad_calibration: #endif /* calculate cpu_khz */ -void __init init_cpu_khz(void) +void init_cpu_khz(void) { if (cpu_has_tsc) { unsigned long tsc_quotient = calibrate_tsc(); @@ -158,3 +159,4 @@ void __init init_cpu_khz(void) } } } + diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c index 7926d967be0..180444d8782 100644 --- a/arch/i386/kernel/timers/timer_tsc.c +++ b/arch/i386/kernel/timers/timer_tsc.c @@ -320,6 +320,26 @@ core_initcall(cpufreq_tsc); static inline void cpufreq_delayed_get(void) { return; } #endif +int recalibrate_cpu_khz(void) +{ +#ifndef CONFIG_SMP + unsigned long cpu_khz_old = cpu_khz; + + if (cpu_has_tsc) { + init_cpu_khz(); + cpu_data[0].loops_per_jiffy = + cpufreq_scale(cpu_data[0].loops_per_jiffy, + cpu_khz_old, + cpu_khz); + return 0; + } else + return -ENODEV; +#else + return -ENODEV; +#endif +} +EXPORT_SYMBOL(recalibrate_cpu_khz); + static void mark_offset_tsc(void) { unsigned long lost,delay; diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index 00c63419c06..83c579e82a8 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -306,7 +306,7 @@ void die(const char * str, struct pt_regs * regs, long err) }; static int die_counter; - if (die.lock_owner != _smp_processor_id()) { + if (die.lock_owner != raw_smp_processor_id()) { console_verbose(); spin_lock_irq(&die.lock); die.lock_owner = smp_processor_id(); diff --git a/arch/i386/lib/delay.c b/arch/i386/lib/delay.c index 080639f262b..eb0cdfe9280 100644 --- a/arch/i386/lib/delay.c +++ b/arch/i386/lib/delay.c @@ -34,7 +34,7 @@ inline void __const_udelay(unsigned long xloops) xloops *= 4; __asm__("mull %0" :"=d" (xloops), "=&a" (d0) - :"1" (xloops),"0" (cpu_data[_smp_processor_id()].loops_per_jiffy * (HZ/4))); + :"1" (xloops),"0" (cpu_data[raw_smp_processor_id()].loops_per_jiffy * (HZ/4))); __delay(++xloops); } diff --git a/arch/i386/mach-voyager/voyager_smp.c b/arch/i386/mach-voyager/voyager_smp.c index 903d739ca74..a6e0ddd65bd 100644 --- a/arch/i386/mach-voyager/voyager_smp.c +++ b/arch/i386/mach-voyager/voyager_smp.c @@ -97,7 +97,6 @@ static void ack_vic_irq(unsigned int irq); static void vic_enable_cpi(void); static void do_boot_cpu(__u8 cpuid); static void do_quad_bootstrap(void); -static inline void wrapper_smp_local_timer_interrupt(struct pt_regs *); int hard_smp_processor_id(void); @@ -126,6 +125,14 @@ send_QIC_CPI(__u32 cpuset, __u8 cpi) } static inline void +wrapper_smp_local_timer_interrupt(struct pt_regs *regs) +{ + irq_enter(); + smp_local_timer_interrupt(regs); + irq_exit(); +} + +static inline void send_one_CPI(__u8 cpu, __u8 cpi) { if(voyager_quad_processors & (1<<cpu)) @@ -1249,14 +1256,6 @@ smp_vic_timer_interrupt(struct pt_regs *regs) smp_local_timer_interrupt(regs); } -static inline void -wrapper_smp_local_timer_interrupt(struct pt_regs *regs) -{ - irq_enter(); - smp_local_timer_interrupt(regs); - irq_exit(); -} - /* local (per CPU) timer interrupt. It does both profiling and * process statistics/rescheduling. * diff --git a/arch/i386/mm/hugetlbpage.c b/arch/i386/mm/hugetlbpage.c index 171fc925e1e..3b099f32b94 100644 --- a/arch/i386/mm/hugetlbpage.c +++ b/arch/i386/mm/hugetlbpage.c @@ -18,7 +18,7 @@ #include <asm/tlb.h> #include <asm/tlbflush.h> -static pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) +pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) { pgd_t *pgd; pud_t *pud; @@ -30,7 +30,7 @@ static pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) return (pte_t *) pmd; } -static pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) +pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) { pgd_t *pgd; pud_t *pud; @@ -42,21 +42,6 @@ static pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) return (pte_t *) pmd; } -static void set_huge_pte(struct mm_struct *mm, struct vm_area_struct *vma, struct page *page, pte_t * page_table, int write_access) -{ - pte_t entry; - - add_mm_counter(mm, rss, HPAGE_SIZE / PAGE_SIZE); - if (write_access) { - entry = - pte_mkwrite(pte_mkdirty(mk_pte(page, vma->vm_page_prot))); - } else - entry = pte_wrprotect(mk_pte(page, vma->vm_page_prot)); - entry = pte_mkyoung(entry); - mk_pte_huge(entry); - set_pte(page_table, entry); -} - /* * This function checks for proper alignment of input addr and len parameters. */ @@ -69,77 +54,6 @@ int is_aligned_hugepage_range(unsigned long addr, unsigned long len) return 0; } -int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src, - struct vm_area_struct *vma) -{ - pte_t *src_pte, *dst_pte, entry; - struct page *ptepage; - unsigned long addr = vma->vm_start; - unsigned long end = vma->vm_end; - - while (addr < end) { - dst_pte = huge_pte_alloc(dst, addr); - if (!dst_pte) - goto nomem; - src_pte = huge_pte_offset(src, addr); - entry = *src_pte; - ptepage = pte_page(entry); - get_page(ptepage); - set_pte(dst_pte, entry); - add_mm_counter(dst, rss, HPAGE_SIZE / PAGE_SIZE); - addr += HPAGE_SIZE; - } - return 0; - -nomem: - return -ENOMEM; -} - -int -follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma, - struct page **pages, struct vm_area_struct **vmas, - unsigned long *position, int *length, int i) -{ - unsigned long vpfn, vaddr = *position; - int remainder = *length; - - WARN_ON(!is_vm_hugetlb_page(vma)); - - vpfn = vaddr/PAGE_SIZE; - while (vaddr < vma->vm_end && remainder) { - - if (pages) { - pte_t *pte; - struct page *page; - - pte = huge_pte_offset(mm, vaddr); - - /* hugetlb should be locked, and hence, prefaulted */ - WARN_ON(!pte || pte_none(*pte)); - - page = &pte_page(*pte)[vpfn % (HPAGE_SIZE/PAGE_SIZE)]; - - WARN_ON(!PageCompound(page)); - - get_page(page); - pages[i] = page; - } - - if (vmas) - vmas[i] = vma; - - vaddr += PAGE_SIZE; - ++vpfn; - --remainder; - ++i; - } - - *length = remainder; - *position = vaddr; - - return i; -} - #if 0 /* This is just for testing */ struct page * follow_huge_addr(struct mm_struct *mm, unsigned long address, int write) @@ -204,83 +118,15 @@ follow_huge_pmd(struct mm_struct *mm, unsigned long address, } #endif -void unmap_hugepage_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) +void hugetlb_clean_stale_pgtable(pte_t *pte) { - struct mm_struct *mm = vma->vm_mm; - unsigned long address; - pte_t pte, *ptep; + pmd_t *pmd = (pmd_t *) pte; struct page *page; - BUG_ON(start & (HPAGE_SIZE - 1)); - BUG_ON(end & (HPAGE_SIZE - 1)); - - for (address = start; address < end; address += HPAGE_SIZE) { - ptep = huge_pte_offset(mm, address); - if (!ptep) - continue; - pte = ptep_get_and_clear(mm, address, ptep); - if (pte_none(pte)) - continue; - page = pte_page(pte); - put_page(page); - } - add_mm_counter(mm ,rss, -((end - start) >> PAGE_SHIFT)); - flush_tlb_range(vma, start, end); -} - -int hugetlb_prefault(struct address_space *mapping, struct vm_area_struct *vma) -{ - struct mm_struct *mm = current->mm; - unsigned long addr; - int ret = 0; - - BUG_ON(vma->vm_start & ~HPAGE_MASK); - BUG_ON(vma->vm_end & ~HPAGE_MASK); - - spin_lock(&mm->page_table_lock); - for (addr = vma->vm_start; addr < vma->vm_end; addr += HPAGE_SIZE) { - unsigned long idx; - pte_t *pte = huge_pte_alloc(mm, addr); - struct page *page; - - if (!pte) { - ret = -ENOMEM; - goto out; - } - - if (!pte_none(*pte)) - continue; - - idx = ((addr - vma->vm_start) >> HPAGE_SHIFT) - + (vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT)); - page = find_get_page(mapping, idx); - if (!page) { - /* charge the fs quota first */ - if (hugetlb_get_quota(mapping)) { - ret = -ENOMEM; - goto out; - } - page = alloc_huge_page(); - if (!page) { - hugetlb_put_quota(mapping); - ret = -ENOMEM; - goto out; - } - ret = add_to_page_cache(page, mapping, idx, GFP_ATOMIC); - if (! ret) { - unlock_page(page); - } else { - hugetlb_put_quota(mapping); - free_huge_page(page); - goto out; - } - } - set_huge_pte(mm, vma, page, pte, vma->vm_flags & VM_WRITE); - } -out: - spin_unlock(&mm->page_table_lock); - return ret; + page = pmd_page(*pmd); + pmd_clear(pmd); + dec_page_state(nr_page_table_pages); + page_cache_release(page); } /* x86_64 also uses this file */ @@ -294,7 +140,12 @@ static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *file, struct vm_area_struct *vma; unsigned long start_addr; - start_addr = mm->free_area_cache; + if (len > mm->cached_hole_size) { + start_addr = mm->free_area_cache; + } else { + start_addr = TASK_UNMAPPED_BASE; + mm->cached_hole_size = 0; + } full_search: addr = ALIGN(start_addr, HPAGE_SIZE); @@ -308,6 +159,7 @@ full_search: */ if (start_addr != TASK_UNMAPPED_BASE) { start_addr = TASK_UNMAPPED_BASE; + mm->cached_hole_size = 0; goto full_search; } return -ENOMEM; @@ -316,6 +168,8 @@ full_search: mm->free_area_cache = addr + len; return addr; } + if (addr + mm->cached_hole_size < vma->vm_start) + mm->cached_hole_size = vma->vm_start - addr; addr = ALIGN(vma->vm_end, HPAGE_SIZE); } } @@ -327,12 +181,17 @@ static unsigned long hugetlb_get_unmapped_area_topdown(struct file *file, struct mm_struct *mm = current->mm; struct vm_area_struct *vma, *prev_vma; unsigned long base = mm->mmap_base, addr = addr0; + unsigned long largest_hole = mm->cached_hole_size; int first_time = 1; /* don't allow allocations above current base */ if (mm->free_area_cache > base) mm->free_area_cache = base; + if (len <= largest_hole) { + largest_hole = 0; + mm->free_area_cache = base; + } try_again: /* make sure it can fit in the remaining address space */ if (mm->free_area_cache < len) @@ -353,13 +212,21 @@ try_again: * vma->vm_start, use it: */ if (addr + len <= vma->vm_start && - (!prev_vma || (addr >= prev_vma->vm_end))) + (!prev_vma || (addr >= prev_vma->vm_end))) { /* remember the address as a hint for next time */ - return (mm->free_area_cache = addr); - else + mm->cached_hole_size = largest_hole; + return (mm->free_area_cache = addr); + } else { /* pull free_area_cache down to the first hole */ - if (mm->free_area_cache == vma->vm_end) + if (mm->free_area_cache == vma->vm_end) { mm->free_area_cache = vma->vm_start; + mm->cached_hole_size = largest_hole; + } + } + + /* remember the largest hole we saw so far */ + if (addr + largest_hole < vma->vm_start) + largest_hole = vma->vm_start - addr; /* try just below the current vma->vm_start */ addr = (vma->vm_start - len) & HPAGE_MASK; @@ -372,6 +239,7 @@ fail: */ if (first_time) { mm->free_area_cache = base; + largest_hole = 0; first_time = 0; goto try_again; } @@ -382,6 +250,7 @@ fail: * allocations. */ mm->free_area_cache = TASK_UNMAPPED_BASE; + mm->cached_hole_size = ~0UL; addr = hugetlb_get_unmapped_area_bottomup(file, addr0, len, pgoff, flags); @@ -389,6 +258,7 @@ fail: * Restore the topdown base: */ mm->free_area_cache = base; + mm->cached_hole_size = ~0UL; return addr; } diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c index 7a7ea373726..8766c771bb4 100644 --- a/arch/i386/mm/init.c +++ b/arch/i386/mm/init.c @@ -269,7 +269,6 @@ void __init one_highpage_init(struct page *page, int pfn, int bad_ppro) { if (page_is_ram(pfn) && !(bad_ppro && page_kills_ppro(pfn))) { ClearPageReserved(page); - set_bit(PG_highmem, &page->flags); set_page_count(page, 1); __free_page(page); totalhigh_pages++; diff --git a/arch/i386/mm/ioremap.c b/arch/i386/mm/ioremap.c index db06f739991..ab542792b27 100644 --- a/arch/i386/mm/ioremap.c +++ b/arch/i386/mm/ioremap.c @@ -238,19 +238,21 @@ void iounmap(volatile void __iomem *addr) addr < phys_to_virt(ISA_END_ADDRESS)) return; - p = remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr)); + write_lock(&vmlist_lock); + p = __remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr)); if (!p) { - printk("__iounmap: bad address %p\n", addr); - return; + printk("iounmap: bad address %p\n", addr); + goto out_unlock; } if ((p->flags >> 20) && p->phys_addr < virt_to_phys(high_memory) - 1) { - /* p->size includes the guard page, but cpa doesn't like that */ change_page_attr(virt_to_page(__va(p->phys_addr)), p->size >> PAGE_SHIFT, PAGE_KERNEL); global_flush_tlb(); } +out_unlock: + write_unlock(&vmlist_lock); kfree(p); } diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c index be52c5ac4e0..8e8e895e1b5 100644 --- a/arch/i386/pci/fixup.c +++ b/arch/i386/pci/fixup.c @@ -253,7 +253,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci #define MAX_PCIEROOT 6 static int quirk_aspm_offset[MAX_PCIEROOT << 3]; -#define GET_INDEX(a, b) (((a - PCI_DEVICE_ID_INTEL_MCH_PA) << 3) + b) +#define GET_INDEX(a, b) ((((a) - PCI_DEVICE_ID_INTEL_MCH_PA) << 3) + ((b) & 7)) static int quirk_pcie_aspm_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) { diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c index d6598da4b67..da21b1d07c1 100644 --- a/arch/i386/pci/irq.c +++ b/arch/i386/pci/irq.c @@ -1029,7 +1029,6 @@ void pcibios_penalize_isa_irq(int irq) static int pirq_enable_irq(struct pci_dev *dev) { u8 pin; - extern int via_interrupt_line_quirk; struct pci_dev *temp_dev; pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); @@ -1084,10 +1083,6 @@ static int pirq_enable_irq(struct pci_dev *dev) printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.%s\n", 'A' + pin, pci_name(dev), msg); } - /* VIA bridges use interrupt line for apic/pci steering across - the V-Link */ - else if (via_interrupt_line_quirk) - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq & 15); return 0; } diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 3ad2c4af099..34e603cc171 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -50,6 +50,10 @@ config SCHED_NO_NO_OMIT_FRAME_POINTER bool default y +config IA64_UNCACHED_ALLOCATOR + bool + select GENERIC_ALLOCATOR + choice prompt "System type" default IA64_GENERIC @@ -223,7 +227,7 @@ config IA64_SGI_SN_SIM config IA64_SGI_SN_XP tristate "Support communication between SGI SSIs" - depends on MSPEC + select IA64_UNCACHED_ALLOCATOR help An SGI machine can be divided into multiple Single System Images which act independently of each other and have diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index 6ff7107fee4..a01bb02d074 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -588,6 +588,7 @@ CONFIG_SGI_MBCS=m CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_SGI_L1_CONSOLE=y +CONFIG_SERIAL_SGI_IOC4=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -788,6 +789,11 @@ CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set # +# SN Devices +# +CONFIG_SGI_IOC4=y + +# # File systems # CONFIG_EXT2_FS=y diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index 7539e83bf05..9997ef45ab2 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -638,6 +638,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_SGI_L1_CONSOLE=y +CONFIG_SERIAL_SGI_IOC4=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -943,6 +944,11 @@ CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set # +# SN Devices +# +CONFIG_SGI_IOC4=y + +# # File systems # CONFIG_EXT2_FS=y diff --git a/arch/ia64/ia32/ia32_ioctl.c b/arch/ia64/ia32/ia32_ioctl.c index 9845dabe261..164b211f417 100644 --- a/arch/ia64/ia32/ia32_ioctl.c +++ b/arch/ia64/ia32/ia32_ioctl.c @@ -13,7 +13,6 @@ #define INCLUDES #include "compat_ioctl.c" -#include <asm/ioctl32.h> #define IOCTL_NR(a) ((a) & ~(_IOC_SIZEMASK << _IOC_SIZESHIFT)) diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c index 247a21c64ae..c1e20d65dd6 100644 --- a/arch/ia64/ia32/sys_ia32.c +++ b/arch/ia64/ia32/sys_ia32.c @@ -2427,7 +2427,7 @@ sys32_epoll_wait(int epfd, struct epoll_event32 __user * events, int maxevents, { struct epoll_event *events64 = NULL; mm_segment_t old_fs = get_fs(); - int error, numevents, size; + int numevents, size; int evt_idx; int do_free_pages = 0; diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile index c1a02bbc252..4c73d8ba2e3 100644 --- a/arch/ia64/kernel/Makefile +++ b/arch/ia64/kernel/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_SMP) += smp.o smpboot.o domain.o obj-$(CONFIG_PERFMON) += perfmon_default_smpl.o obj-$(CONFIG_IA64_CYCLONE) += cyclone.o obj-$(CONFIG_IA64_MCA_RECOVERY) += mca_recovery.o +obj-$(CONFIG_IA64_UNCACHED_ALLOCATOR) += uncached.o mca_recovery-y += mca_drv.o mca_drv_asm.o # The gate DSO image is built using a special linker script. diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index 4a3b1aac43e..179f230816e 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -410,6 +410,38 @@ efi_memmap_walk (efi_freemem_callback_t callback, void *arg) } /* + * Walk the EFI memory map to pull out leftover pages in the lower + * memory regions which do not end up in the regular memory map and + * stick them into the uncached allocator + * + * The regular walk function is significantly more complex than the + * uncached walk which means it really doesn't make sense to try and + * marge the two. + */ +void __init +efi_memmap_walk_uc (efi_freemem_callback_t callback) +{ + void *efi_map_start, *efi_map_end, *p; + efi_memory_desc_t *md; + u64 efi_desc_size, start, end; + + efi_map_start = __va(ia64_boot_param->efi_memmap); + efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size; + efi_desc_size = ia64_boot_param->efi_memdesc_size; + + for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) { + md = p; + if (md->attribute == EFI_MEMORY_UC) { + start = PAGE_ALIGN(md->phys_addr); + end = PAGE_ALIGN((md->phys_addr+(md->num_pages << EFI_PAGE_SHIFT)) & PAGE_MASK); + if ((*callback)(start, end, NULL) < 0) + return; + } + } +} + + +/* * Look for the PAL_CODE region reported by EFI and maps it using an * ITR to enable safe PAL calls in virtual mode. See IA-64 Processor * Abstraction Layer chapter 11 in ADAG diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 81c45d44739..b1d5d3d5276 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1182,7 +1182,7 @@ ENTRY(notify_resume_user) ;; (pNonSys) mov out2=0 // out2==0 => not a syscall .fframe 16 - .spillpsp ar.unat, 16 // (note that offset is relative to psp+0x10!) + .spillsp ar.unat, 16 st8 [sp]=r9,-16 // allocate space for ar.unat and save it st8 [out1]=loc1,-8 // save ar.pfs, out1=&sigscratch .body @@ -1208,7 +1208,7 @@ GLOBAL_ENTRY(sys_rt_sigsuspend) adds out2=8,sp // out2=&sigscratch->ar_pfs ;; .fframe 16 - .spillpsp ar.unat, 16 // (note that offset is relative to psp+0x10!) + .spillsp ar.unat, 16 st8 [sp]=r9,-16 // allocate space for ar.unat and save it st8 [out2]=loc1,-8 // save ar.pfs, out2=&sigscratch .body @@ -1579,7 +1579,7 @@ sys_call_table: data8 sys_keyctl data8 sys_ni_syscall data8 sys_ni_syscall // 1275 - data8 sys_ni_syscall + data8 sys_set_zone_reclaim data8 sys_ni_syscall data8 sys_ni_syscall data8 sys_ni_syscall diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S index 4f3cdef7579..962b6c4e32b 100644 --- a/arch/ia64/kernel/fsys.S +++ b/arch/ia64/kernel/fsys.S @@ -460,9 +460,9 @@ EX(.fail_efault, ld8 r14=[r33]) // r14 <- *set ;; st8 [r2]=r14 // update current->blocked with new mask - cmpxchg4.acq r14=[r9],r18,ar.ccv // current->thread_info->flags <- r18 + cmpxchg4.acq r8=[r9],r18,ar.ccv // current->thread_info->flags <- r18 ;; - cmp.ne p6,p0=r17,r14 // update failed? + cmp.ne p6,p0=r17,r8 // update failed? (p6) br.cond.spnt.few 1b // yes -> retry #ifdef CONFIG_SMP diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 4d6c7b8f667..736e328b5e6 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -1103,8 +1103,6 @@ ia64_mca_cpe_int_caller(int cpe_irq, void *arg, struct pt_regs *ptregs) return IRQ_HANDLED; } -#endif /* CONFIG_ACPI */ - /* * ia64_mca_cpe_poll * @@ -1122,6 +1120,8 @@ ia64_mca_cpe_poll (unsigned long dummy) platform_send_ipi(first_cpu(cpu_online_map), IA64_CPEP_VECTOR, IA64_IPI_DM_INT, 0); } +#endif /* CONFIG_ACPI */ + /* * C portion of the OS INIT handler * @@ -1390,8 +1390,7 @@ ia64_mca_init(void) register_percpu_irq(IA64_MCA_WAKEUP_VECTOR, &mca_wkup_irqaction); #ifdef CONFIG_ACPI - /* Setup the CPEI/P vector and handler */ - cpe_vector = acpi_request_vector(ACPI_INTERRUPT_CPEI); + /* Setup the CPEI/P handler */ register_percpu_irq(IA64_CPEP_VECTOR, &mca_cpep_irqaction); #endif @@ -1436,6 +1435,7 @@ ia64_mca_late_init(void) #ifdef CONFIG_ACPI /* Setup the CPEI/P vector and handler */ + cpe_vector = acpi_request_vector(ACPI_INTERRUPT_CPEI); init_timer(&cpe_poll_timer); cpe_poll_timer.function = ia64_mca_cpe_poll; diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h index 1dbc7b2497c..f6d8a010d99 100644 --- a/arch/ia64/kernel/minstate.h +++ b/arch/ia64/kernel/minstate.h @@ -41,7 +41,7 @@ (pKStk) addl r3=THIS_CPU(ia64_mca_data),r3;; \ (pKStk) ld8 r3 = [r3];; \ (pKStk) addl r3=IA64_MCA_CPU_INIT_STACK_OFFSET,r3;; \ -(pKStk) addl sp=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r3; \ +(pKStk) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r3; \ (pUStk) mov ar.rsc=0; /* set enforced lazy mode, pl 0, little-endian, loadrs=0 */ \ (pUStk) addl r22=IA64_RBS_OFFSET,r1; /* compute base of register backing store */ \ ;; \ @@ -50,7 +50,6 @@ (pUStk) mov r23=ar.bspstore; /* save ar.bspstore */ \ (pUStk) dep r22=-1,r22,61,3; /* compute kernel virtual addr of RBS */ \ ;; \ -(pKStk) addl r1=-IA64_PT_REGS_SIZE,r1; /* if in kernel mode, use sp (r12) */ \ (pUStk) mov ar.bspstore=r22; /* switch to kernel RBS */ \ ;; \ (pUStk) mov r18=ar.bsp; \ diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c index febc091c2f0..f1aca7cffd1 100644 --- a/arch/ia64/kernel/module.c +++ b/arch/ia64/kernel/module.c @@ -825,14 +825,16 @@ apply_relocate_add (Elf64_Shdr *sechdrs, const char *strtab, unsigned int symind * XXX Should have an arch-hook for running this after final section * addresses have been selected... */ - /* See if gp can cover the entire core module: */ - uint64_t gp = (uint64_t) mod->module_core + MAX_LTOFF / 2; - if (mod->core_size >= MAX_LTOFF) + uint64_t gp; + if (mod->core_size > MAX_LTOFF) /* * This takes advantage of fact that SHF_ARCH_SMALL gets allocated * at the end of the module. */ - gp = (uint64_t) mod->module_core + mod->core_size - MAX_LTOFF / 2; + gp = mod->core_size - MAX_LTOFF / 2; + else + gp = mod->core_size / 2; + gp = (uint64_t) mod->module_core + ((gp + 7) & -8); mod->arch.gp = gp; DEBUGP("%s: placing gp at 0x%lx\n", __FUNCTION__, gp); } diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 71c101601e3..6407bff6bfd 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -11,7 +11,7 @@ * Version Perfmon-2.x is a rewrite of perfmon-1.x * by Stephane Eranian, Hewlett Packard Co. * - * Copyright (C) 1999-2003, 2005 Hewlett Packard Co + * Copyright (C) 1999-2005 Hewlett Packard Co * Stephane Eranian <eranian@hpl.hp.com> * David Mosberger-Tang <davidm@hpl.hp.com> * @@ -497,6 +497,9 @@ typedef struct { static pfm_stats_t pfm_stats[NR_CPUS]; static pfm_session_t pfm_sessions; /* global sessions information */ +static spinlock_t pfm_alt_install_check = SPIN_LOCK_UNLOCKED; +static pfm_intr_handler_desc_t *pfm_alt_intr_handler; + static struct proc_dir_entry *perfmon_dir; static pfm_uuid_t pfm_null_uuid = {0,}; @@ -606,6 +609,7 @@ DEFINE_PER_CPU(unsigned long, pfm_syst_info); DEFINE_PER_CPU(struct task_struct *, pmu_owner); DEFINE_PER_CPU(pfm_context_t *, pmu_ctx); DEFINE_PER_CPU(unsigned long, pmu_activation_number); +EXPORT_PER_CPU_SYMBOL_GPL(pfm_syst_info); /* forward declaration */ @@ -1325,7 +1329,7 @@ pfm_reserve_session(struct task_struct *task, int is_syswide, unsigned int cpu) error_conflict: DPRINT(("system wide not possible, conflicting session [%d] on CPU%d\n", pfm_sessions.pfs_sys_session[cpu]->pid, - smp_processor_id())); + cpu)); abort: UNLOCK_PFS(flags); @@ -5555,26 +5559,32 @@ pfm_interrupt_handler(int irq, void *arg, struct pt_regs *regs) int ret; this_cpu = get_cpu(); - min = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min; - max = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max; + if (likely(!pfm_alt_intr_handler)) { + min = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min; + max = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max; - start_cycles = ia64_get_itc(); + start_cycles = ia64_get_itc(); - ret = pfm_do_interrupt_handler(irq, arg, regs); + ret = pfm_do_interrupt_handler(irq, arg, regs); - total_cycles = ia64_get_itc(); + total_cycles = ia64_get_itc(); - /* - * don't measure spurious interrupts - */ - if (likely(ret == 0)) { - total_cycles -= start_cycles; + /* + * don't measure spurious interrupts + */ + if (likely(ret == 0)) { + total_cycles -= start_cycles; - if (total_cycles < min) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min = total_cycles; - if (total_cycles > max) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max = total_cycles; + if (total_cycles < min) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min = total_cycles; + if (total_cycles > max) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max = total_cycles; - pfm_stats[this_cpu].pfm_ovfl_intr_cycles += total_cycles; + pfm_stats[this_cpu].pfm_ovfl_intr_cycles += total_cycles; + } + } + else { + (*pfm_alt_intr_handler->handler)(irq, arg, regs); } + put_cpu_no_resched(); return IRQ_HANDLED; } @@ -6425,6 +6435,141 @@ static struct irqaction perfmon_irqaction = { .name = "perfmon" }; +static void +pfm_alt_save_pmu_state(void *data) +{ + struct pt_regs *regs; + + regs = ia64_task_regs(current); + + DPRINT(("called\n")); + + /* + * should not be necessary but + * let's take not risk + */ + pfm_clear_psr_up(); + pfm_clear_psr_pp(); + ia64_psr(regs)->pp = 0; + + /* + * This call is required + * May cause a spurious interrupt on some processors + */ + pfm_freeze_pmu(); + + ia64_srlz_d(); +} + +void +pfm_alt_restore_pmu_state(void *data) +{ + struct pt_regs *regs; + + regs = ia64_task_regs(current); + + DPRINT(("called\n")); + + /* + * put PMU back in state expected + * by perfmon + */ + pfm_clear_psr_up(); + pfm_clear_psr_pp(); + ia64_psr(regs)->pp = 0; + + /* + * perfmon runs with PMU unfrozen at all times + */ + pfm_unfreeze_pmu(); + + ia64_srlz_d(); +} + +int +pfm_install_alt_pmu_interrupt(pfm_intr_handler_desc_t *hdl) +{ + int ret, i; + int reserve_cpu; + + /* some sanity checks */ + if (hdl == NULL || hdl->handler == NULL) return -EINVAL; + + /* do the easy test first */ + if (pfm_alt_intr_handler) return -EBUSY; + + /* one at a time in the install or remove, just fail the others */ + if (!spin_trylock(&pfm_alt_install_check)) { + return -EBUSY; + } + + /* reserve our session */ + for_each_online_cpu(reserve_cpu) { + ret = pfm_reserve_session(NULL, 1, reserve_cpu); + if (ret) goto cleanup_reserve; + } + + /* save the current system wide pmu states */ + ret = on_each_cpu(pfm_alt_save_pmu_state, NULL, 0, 1); + if (ret) { + DPRINT(("on_each_cpu() failed: %d\n", ret)); + goto cleanup_reserve; + } + + /* officially change to the alternate interrupt handler */ + pfm_alt_intr_handler = hdl; + + spin_unlock(&pfm_alt_install_check); + + return 0; + +cleanup_reserve: + for_each_online_cpu(i) { + /* don't unreserve more than we reserved */ + if (i >= reserve_cpu) break; + + pfm_unreserve_session(NULL, 1, i); + } + + spin_unlock(&pfm_alt_install_check); + + return ret; +} +EXPORT_SYMBOL_GPL(pfm_install_alt_pmu_interrupt); + +int +pfm_remove_alt_pmu_interrupt(pfm_intr_handler_desc_t *hdl) +{ + int i; + int ret; + + if (hdl == NULL) return -EINVAL; + + /* cannot remove someone else's handler! */ + if (pfm_alt_intr_handler != hdl) return -EINVAL; + + /* one at a time in the install or remove, just fail the others */ + if (!spin_trylock(&pfm_alt_install_check)) { + return -EBUSY; + } + + pfm_alt_intr_handler = NULL; + + ret = on_each_cpu(pfm_alt_restore_pmu_state, NULL, 0, 1); + if (ret) { + DPRINT(("on_each_cpu() failed: %d\n", ret)); + } + + for_each_online_cpu(i) { + pfm_unreserve_session(NULL, 1, i); + } + + spin_unlock(&pfm_alt_install_check); + + return 0; +} +EXPORT_SYMBOL_GPL(pfm_remove_alt_pmu_interrupt); + /* * perfmon initialization routine, called from the initcall() table */ diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index 907464ee727..575a8f657b3 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -635,11 +635,17 @@ ia64_flush_fph (struct task_struct *task) { struct ia64_psr *psr = ia64_psr(ia64_task_regs(task)); + /* + * Prevent migrating this task while + * we're fiddling with the FPU state + */ + preempt_disable(); if (ia64_is_local_fpu_owner(task) && psr->mfh) { psr->mfh = 0; task->thread.flags |= IA64_THREAD_FPH_VALID; ia64_save_fpu(&task->thread.fph[0]); } + preempt_enable(); } /* @@ -692,16 +698,30 @@ convert_to_non_syscall (struct task_struct *child, struct pt_regs *pt, unsigned long cfm) { struct unw_frame_info info, prev_info; - unsigned long ip, pr; + unsigned long ip, sp, pr; unw_init_from_blocked_task(&info, child); while (1) { prev_info = info; if (unw_unwind(&info) < 0) return; - if (unw_get_rp(&info, &ip) < 0) + + unw_get_sp(&info, &sp); + if ((long)((unsigned long)child + IA64_STK_OFFSET - sp) + < IA64_PT_REGS_SIZE) { + dprintk("ptrace.%s: ran off the top of the kernel " + "stack\n", __FUNCTION__); + return; + } + if (unw_get_pr (&prev_info, &pr) < 0) { + unw_get_rp(&prev_info, &ip); + dprintk("ptrace.%s: failed to read " + "predicate register (ip=0x%lx)\n", + __FUNCTION__, ip); return; - if (ip < FIXADDR_USER_END) + } + if (unw_is_intr_frame(&info) + && (pr & (1UL << PRED_USER_STACK))) break; } diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index b7e6b4cb374..d14692e0920 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -720,7 +720,8 @@ cpu_init (void) ia64_set_kr(IA64_KR_PT_BASE, __pa(ia64_imva(empty_zero_page))); /* - * Initialize default control register to defer all speculative faults. The + * Initialize default control register to defer speculative faults except + * for those arising from TLB misses, which are not deferred. The * kernel MUST NOT depend on a particular setting of these bits (in other words, * the kernel must have recovery code for all speculative accesses). Turn on * dcr.lc as per recommendation by the architecture team. Most IA-32 apps diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index 0d5ee57c986..3865f088ffa 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -624,7 +624,7 @@ static struct { __u16 thread_id; __u16 proc_fixed_addr; __u8 valid; -}mt_info[NR_CPUS] __devinit; +} mt_info[NR_CPUS] __devinitdata; #ifdef CONFIG_HOTPLUG_CPU static inline void diff --git a/arch/ia64/kernel/sys_ia64.c b/arch/ia64/kernel/sys_ia64.c index a8cf6d8a509..770fab37928 100644 --- a/arch/ia64/kernel/sys_ia64.c +++ b/arch/ia64/kernel/sys_ia64.c @@ -182,13 +182,6 @@ do_mmap2 (unsigned long addr, unsigned long len, int prot, int flags, int fd, un } } - /* - * A zero mmap always succeeds in Linux, independent of whether or not the - * remaining arguments are valid. - */ - if (len == 0) - goto out; - /* Careful about overflows.. */ len = PAGE_ALIGN(len); if (!len || len > TASK_SIZE) { diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c index e82ad78081b..1861173bd4f 100644 --- a/arch/ia64/kernel/traps.c +++ b/arch/ia64/kernel/traps.c @@ -111,6 +111,24 @@ ia64_bad_break (unsigned long break_num, struct pt_regs *regs) siginfo_t siginfo; int sig, code; + /* break.b always sets cr.iim to 0, which causes problems for + * debuggers. Get the real break number from the original instruction, + * but only for kernel code. User space break.b is left alone, to + * preserve the existing behaviour. All break codings have the same + * format, so there is no need to check the slot type. + */ + if (break_num == 0 && !user_mode(regs)) { + struct ia64_psr *ipsr = ia64_psr(regs); + unsigned long *bundle = (unsigned long *)regs->cr_iip; + unsigned long slot; + switch (ipsr->ri) { + case 0: slot = (bundle[0] >> 5); break; + case 1: slot = (bundle[0] >> 46) | (bundle[1] << 18); break; + default: slot = (bundle[1] >> 23); break; + } + break_num = ((slot >> 36 & 1) << 20) | (slot >> 6 & 0xfffff); + } + /* SIGILL, SIGFPE, SIGSEGV, and SIGBUS want these field initialized: */ siginfo.si_addr = (void __user *) (regs->cr_iip + ia64_psr(regs)->ri); siginfo.si_imm = break_num; @@ -202,13 +220,21 @@ disabled_fph_fault (struct pt_regs *regs) /* first, grant user-level access to fph partition: */ psr->dfh = 0; + + /* + * Make sure that no other task gets in on this processor + * while we're claiming the FPU + */ + preempt_disable(); #ifndef CONFIG_SMP { struct task_struct *fpu_owner = (struct task_struct *)ia64_get_kr(IA64_KR_FPU_OWNER); - if (ia64_is_local_fpu_owner(current)) + if (ia64_is_local_fpu_owner(current)) { + preempt_enable_no_resched(); return; + } if (fpu_owner) ia64_flush_fph(fpu_owner); @@ -226,6 +252,7 @@ disabled_fph_fault (struct pt_regs *regs) */ psr->mfh = 1; } + preempt_enable_no_resched(); } static inline int diff --git a/arch/ia64/kernel/uncached.c b/arch/ia64/kernel/uncached.c new file mode 100644 index 00000000000..490dfc9ab47 --- /dev/null +++ b/arch/ia64/kernel/uncached.c @@ -0,0 +1,246 @@ +/* + * Copyright (C) 2001-2005 Silicon Graphics, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * A simple uncached page allocator using the generic allocator. This + * allocator first utilizes the spare (spill) pages found in the EFI + * memmap and will then start converting cached pages to uncached ones + * at a granule at a time. Node awareness is implemented by having a + * pool of pages per node. + */ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/efi.h> +#include <linux/genalloc.h> +#include <asm/page.h> +#include <asm/pal.h> +#include <asm/system.h> +#include <asm/pgtable.h> +#include <asm/atomic.h> +#include <asm/tlbflush.h> +#include <asm/sn/arch.h> + +#define DEBUG 0 + +#if DEBUG +#define dprintk printk +#else +#define dprintk(x...) do { } while (0) +#endif + +void __init efi_memmap_walk_uc (efi_freemem_callback_t callback); + +#define MAX_UNCACHED_GRANULES 5 +static int allocated_granules; + +struct gen_pool *uncached_pool[MAX_NUMNODES]; + + +static void uncached_ipi_visibility(void *data) +{ + int status; + + status = ia64_pal_prefetch_visibility(PAL_VISIBILITY_PHYSICAL); + if ((status != PAL_VISIBILITY_OK) && + (status != PAL_VISIBILITY_OK_REMOTE_NEEDED)) + printk(KERN_DEBUG "pal_prefetch_visibility() returns %i on " + "CPU %i\n", status, get_cpu()); +} + + +static void uncached_ipi_mc_drain(void *data) +{ + int status; + status = ia64_pal_mc_drain(); + if (status) + printk(KERN_WARNING "ia64_pal_mc_drain() failed with %i on " + "CPU %i\n", status, get_cpu()); +} + + +static unsigned long +uncached_get_new_chunk(struct gen_pool *poolp) +{ + struct page *page; + void *tmp; + int status, i; + unsigned long addr, node; + + if (allocated_granules >= MAX_UNCACHED_GRANULES) + return 0; + + node = poolp->private; + page = alloc_pages_node(node, GFP_KERNEL | __GFP_ZERO, + IA64_GRANULE_SHIFT-PAGE_SHIFT); + + dprintk(KERN_INFO "get_new_chunk page %p, addr %lx\n", + page, (unsigned long)(page-vmem_map) << PAGE_SHIFT); + + /* + * Do magic if no mem on local node! XXX + */ + if (!page) + return 0; + tmp = page_address(page); + + /* + * There's a small race here where it's possible for someone to + * access the page through /dev/mem halfway through the conversion + * to uncached - not sure it's really worth bothering about + */ + for (i = 0; i < (IA64_GRANULE_SIZE / PAGE_SIZE); i++) + SetPageUncached(&page[i]); + + flush_tlb_kernel_range(tmp, tmp + IA64_GRANULE_SIZE); + + status = ia64_pal_prefetch_visibility(PAL_VISIBILITY_PHYSICAL); + + dprintk(KERN_INFO "pal_prefetch_visibility() returns %i on cpu %i\n", + status, get_cpu()); + + if (!status) { + status = smp_call_function(uncached_ipi_visibility, NULL, 0, 1); + if (status) + printk(KERN_WARNING "smp_call_function failed for " + "uncached_ipi_visibility! (%i)\n", status); + } + + if (ia64_platform_is("sn2")) + sn_flush_all_caches((unsigned long)tmp, IA64_GRANULE_SIZE); + else + flush_icache_range((unsigned long)tmp, + (unsigned long)tmp+IA64_GRANULE_SIZE); + + ia64_pal_mc_drain(); + status = smp_call_function(uncached_ipi_mc_drain, NULL, 0, 1); + if (status) + printk(KERN_WARNING "smp_call_function failed for " + "uncached_ipi_mc_drain! (%i)\n", status); + + addr = (unsigned long)tmp - PAGE_OFFSET + __IA64_UNCACHED_OFFSET; + + allocated_granules++; + return addr; +} + + +/* + * uncached_alloc_page + * + * Allocate 1 uncached page. Allocates on the requested node. If no + * uncached pages are available on the requested node, roundrobin starting + * with higher nodes. + */ +unsigned long +uncached_alloc_page(int nid) +{ + unsigned long maddr; + + maddr = gen_pool_alloc(uncached_pool[nid], PAGE_SIZE); + + dprintk(KERN_DEBUG "uncached_alloc_page returns %lx on node %i\n", + maddr, nid); + + /* + * If no memory is availble on our local node, try the + * remaining nodes in the system. + */ + if (!maddr) { + int i; + + for (i = MAX_NUMNODES - 1; i >= 0; i--) { + if (i == nid || !node_online(i)) + continue; + maddr = gen_pool_alloc(uncached_pool[i], PAGE_SIZE); + dprintk(KERN_DEBUG "uncached_alloc_page alternate search " + "returns %lx on node %i\n", maddr, i); + if (maddr) { + break; + } + } + } + + return maddr; +} +EXPORT_SYMBOL(uncached_alloc_page); + + +/* + * uncached_free_page + * + * Free a single uncached page. + */ +void +uncached_free_page(unsigned long maddr) +{ + int node; + + node = nasid_to_cnodeid(NASID_GET(maddr)); + + dprintk(KERN_DEBUG "uncached_free_page(%lx) on node %i\n", maddr, node); + + if ((maddr & (0XFUL << 60)) != __IA64_UNCACHED_OFFSET) + panic("uncached_free_page invalid address %lx\n", maddr); + + gen_pool_free(uncached_pool[node], maddr, PAGE_SIZE); +} +EXPORT_SYMBOL(uncached_free_page); + + +/* + * uncached_build_memmap, + * + * Called at boot time to build a map of pages that can be used for + * memory special operations. + */ +static int __init +uncached_build_memmap(unsigned long start, unsigned long end, void *arg) +{ + long length; + unsigned long vstart, vend; + int node; + + length = end - start; + vstart = start + __IA64_UNCACHED_OFFSET; + vend = end + __IA64_UNCACHED_OFFSET; + + dprintk(KERN_ERR "uncached_build_memmap(%lx %lx)\n", start, end); + + memset((char *)vstart, 0, length); + + node = nasid_to_cnodeid(NASID_GET(start)); + + for (; vstart < vend ; vstart += PAGE_SIZE) { + dprintk(KERN_INFO "sticking %lx into the pool!\n", vstart); + gen_pool_free(uncached_pool[node], vstart, PAGE_SIZE); + } + + return 0; +} + + +static int __init uncached_init(void) { + int i; + + for (i = 0; i < MAX_NUMNODES; i++) { + if (!node_online(i)) + continue; + uncached_pool[i] = gen_pool_create(0, IA64_GRANULE_SHIFT, + &uncached_get_new_chunk, i); + } + + efi_memmap_walk_uc(uncached_build_memmap); + + return 0; +} + +__initcall(uncached_init); diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c index df08ae7634b..e0a776a3044 100644 --- a/arch/ia64/mm/hugetlbpage.c +++ b/arch/ia64/mm/hugetlbpage.c @@ -24,7 +24,7 @@ unsigned int hpage_shift=HPAGE_SHIFT_DEFAULT; -static pte_t * +pte_t * huge_pte_alloc (struct mm_struct *mm, unsigned long addr) { unsigned long taddr = htlbpage_to_page(addr); @@ -43,7 +43,7 @@ huge_pte_alloc (struct mm_struct *mm, unsigned long addr) return pte; } -static pte_t * +pte_t * huge_pte_offset (struct mm_struct *mm, unsigned long addr) { unsigned long taddr = htlbpage_to_page(addr); @@ -67,23 +67,6 @@ huge_pte_offset (struct mm_struct *mm, unsigned long addr) #define mk_pte_huge(entry) { pte_val(entry) |= _PAGE_P; } -static void -set_huge_pte (struct mm_struct *mm, struct vm_area_struct *vma, - struct page *page, pte_t * page_table, int write_access) -{ - pte_t entry; - - add_mm_counter(mm, rss, HPAGE_SIZE / PAGE_SIZE); - if (write_access) { - entry = - pte_mkwrite(pte_mkdirty(mk_pte(page, vma->vm_page_prot))); - } else - entry = pte_wrprotect(mk_pte(page, vma->vm_page_prot)); - entry = pte_mkyoung(entry); - mk_pte_huge(entry); - set_pte(page_table, entry); - return; -} /* * This function checks for proper alignment of input addr and len parameters. */ @@ -99,68 +82,6 @@ int is_aligned_hugepage_range(unsigned long addr, unsigned long len) return 0; } -int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src, - struct vm_area_struct *vma) -{ - pte_t *src_pte, *dst_pte, entry; - struct page *ptepage; - unsigned long addr = vma->vm_start; - unsigned long end = vma->vm_end; - - while (addr < end) { - dst_pte = huge_pte_alloc(dst, addr); - if (!dst_pte) - goto nomem; - src_pte = huge_pte_offset(src, addr); - entry = *src_pte; - ptepage = pte_page(entry); - get_page(ptepage); - set_pte(dst_pte, entry); - add_mm_counter(dst, rss, HPAGE_SIZE / PAGE_SIZE); - addr += HPAGE_SIZE; - } - return 0; -nomem: - return -ENOMEM; -} - -int -follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma, - struct page **pages, struct vm_area_struct **vmas, - unsigned long *st, int *length, int i) -{ - pte_t *ptep, pte; - unsigned long start = *st; - unsigned long pstart; - int len = *length; - struct page *page; - - do { - pstart = start & HPAGE_MASK; - ptep = huge_pte_offset(mm, start); - pte = *ptep; - -back1: - page = pte_page(pte); - if (pages) { - page += ((start & ~HPAGE_MASK) >> PAGE_SHIFT); - get_page(page); - pages[i] = page; - } - if (vmas) - vmas[i] = vma; - i++; - len--; - start += PAGE_SIZE; - if (((start & HPAGE_MASK) == pstart) && len && - (start < vma->vm_end)) - goto back1; - } while (len && start < vma->vm_end); - *length = len; - *st = start; - return i; -} - struct page *follow_huge_addr(struct mm_struct *mm, unsigned long addr, int write) { struct page *page; @@ -212,81 +133,6 @@ void hugetlb_free_pgd_range(struct mmu_gather **tlb, free_pgd_range(tlb, addr, end, floor, ceiling); } -void unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) -{ - struct mm_struct *mm = vma->vm_mm; - unsigned long address; - pte_t *pte; - struct page *page; - - BUG_ON(start & (HPAGE_SIZE - 1)); - BUG_ON(end & (HPAGE_SIZE - 1)); - - for (address = start; address < end; address += HPAGE_SIZE) { - pte = huge_pte_offset(mm, address); - if (pte_none(*pte)) - continue; - page = pte_page(*pte); - put_page(page); - pte_clear(mm, address, pte); - } - add_mm_counter(mm, rss, - ((end - start) >> PAGE_SHIFT)); - flush_tlb_range(vma, start, end); -} - -int hugetlb_prefault(struct address_space *mapping, struct vm_area_struct *vma) -{ - struct mm_struct *mm = current->mm; - unsigned long addr; - int ret = 0; - - BUG_ON(vma->vm_start & ~HPAGE_MASK); - BUG_ON(vma->vm_end & ~HPAGE_MASK); - - spin_lock(&mm->page_table_lock); - for (addr = vma->vm_start; addr < vma->vm_end; addr += HPAGE_SIZE) { - unsigned long idx; - pte_t *pte = huge_pte_alloc(mm, addr); - struct page *page; - - if (!pte) { - ret = -ENOMEM; - goto out; - } - if (!pte_none(*pte)) - continue; - - idx = ((addr - vma->vm_start) >> HPAGE_SHIFT) - + (vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT)); - page = find_get_page(mapping, idx); - if (!page) { - /* charge the fs quota first */ - if (hugetlb_get_quota(mapping)) { - ret = -ENOMEM; - goto out; - } - page = alloc_huge_page(); - if (!page) { - hugetlb_put_quota(mapping); - ret = -ENOMEM; - goto out; - } - ret = add_to_page_cache(page, mapping, idx, GFP_ATOMIC); - if (! ret) { - unlock_page(page); - } else { - hugetlb_put_quota(mapping); - page_cache_release(page); - goto out; - } - } - set_huge_pte(mm, vma, page, pte, vma->vm_flags & VM_WRITE); - } -out: - spin_unlock(&mm->page_table_lock); - return ret; -} - unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags) { diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index 547785e3cba..4eb2f52b87a 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -305,8 +305,9 @@ setup_gate (void) struct page *page; /* - * Map the gate page twice: once read-only to export the ELF headers etc. and once - * execute-only page to enable privilege-promotion via "epc": + * Map the gate page twice: once read-only to export the ELF + * headers etc. and once execute-only page to enable + * privilege-promotion via "epc": */ page = virt_to_page(ia64_imva(__start_gate_section)); put_kernel_page(page, GATE_ADDR, PAGE_READONLY); @@ -315,6 +316,20 @@ setup_gate (void) put_kernel_page(page, GATE_ADDR + PAGE_SIZE, PAGE_GATE); #else put_kernel_page(page, GATE_ADDR + PERCPU_PAGE_SIZE, PAGE_GATE); + /* Fill in the holes (if any) with read-only zero pages: */ + { + unsigned long addr; + + for (addr = GATE_ADDR + PAGE_SIZE; + addr < GATE_ADDR + PERCPU_PAGE_SIZE; + addr += PAGE_SIZE) + { + put_kernel_page(ZERO_PAGE(0), addr, + PAGE_READONLY); + put_kernel_page(ZERO_PAGE(0), addr + PERCPU_PAGE_SIZE, + PAGE_READONLY); + } + } #endif ia64_patch_gate(); } diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index 4fb44984afe..44bfc7f318c 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -222,7 +222,7 @@ void __init early_sn_setup(void) extern int platform_intr_list[]; extern nasid_t master_nasid; -static int shub_1_1_found __initdata; +static int __initdata shub_1_1_found = 0; /* * sn_check_for_wars @@ -251,7 +251,7 @@ static void __init sn_check_for_wars(void) } else { for_each_online_node(cnode) { if (is_shub_1_1(cnodeid_to_nasid(cnode))) - sn_hub_info->shub_1_1_found = 1; + shub_1_1_found = 1; } } } @@ -271,6 +271,8 @@ void __init sn_setup(char **cmdline_p) int major = sn_sal_rev_major(), minor = sn_sal_rev_minor(); extern void sn_cpu_init(void); + ia64_sn_plat_set_error_handling_features(); + /* * If the generic code has enabled vga console support - lets * get rid of it again. This is a kludge for the fact that ACPI diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c index ab9b5f35c2a..a087b274847 100644 --- a/arch/ia64/sn/kernel/tiocx.c +++ b/arch/ia64/sn/kernel/tiocx.c @@ -432,7 +432,7 @@ static int tiocx_reload(struct cx_dev *cx_dev) return cx_device_reload(cx_dev); } -static ssize_t show_cxdev_control(struct device *dev, char *buf) +static ssize_t show_cxdev_control(struct device *dev, struct device_attribute *attr, char *buf) { struct cx_dev *cx_dev = to_cx_dev(dev); @@ -442,7 +442,7 @@ static ssize_t show_cxdev_control(struct device *dev, char *buf) tiocx_btchar_get(cx_dev->cx_id.nasid)); } -static ssize_t store_cxdev_control(struct device *dev, const char *buf, +static ssize_t store_cxdev_control(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { int n; @@ -518,25 +518,22 @@ static int __init tiocx_init(void) return 0; } -static void __exit tiocx_exit(void) +static int cx_remove_device(struct device * dev, void * data) { - struct device *dev; - struct device *tdev; + struct cx_dev *cx_dev = to_cx_dev(dev); + device_remove_file(dev, &dev_attr_cxdev_control); + cx_device_unregister(cx_dev); + return 0; +} +static void __exit tiocx_exit(void) +{ DBG("tiocx_exit\n"); /* * Unregister devices. */ - list_for_each_entry_safe(dev, tdev, &tiocx_bus_type.devices.list, - bus_list) { - if (dev) { - struct cx_dev *cx_dev = to_cx_dev(dev); - device_remove_file(dev, &dev_attr_cxdev_control); - cx_device_unregister(cx_dev); - } - } - + bus_for_each_dev(&tiocx_bus_type, NULL, NULL, cx_remove_device); bus_unregister(&tiocx_bus_type); } diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c index 2c3c4a8af55..cd7ed73f0e7 100644 --- a/arch/ia64/sn/kernel/xpc_partition.c +++ b/arch/ia64/sn/kernel/xpc_partition.c @@ -22,6 +22,7 @@ #include <linux/cache.h> #include <linux/mmzone.h> #include <linux/nodemask.h> +#include <asm/uncached.h> #include <asm/sn/bte.h> #include <asm/sn/intr.h> #include <asm/sn/sn_sal.h> @@ -183,7 +184,7 @@ xpc_rsvd_page_init(void) * memory protections are never restricted. */ if ((amos_page = xpc_vars->amos_page) == NULL) { - amos_page = (AMO_t *) mspec_kalloc_page(0); + amos_page = (AMO_t *) TO_AMO(uncached_alloc_page(0)); if (amos_page == NULL) { dev_err(xpc_part, "can't allocate page of AMOs\n"); return NULL; @@ -200,7 +201,8 @@ xpc_rsvd_page_init(void) if (ret != 0) { dev_err(xpc_part, "can't change memory " "protections\n"); - mspec_kfree_page((unsigned long) amos_page); + uncached_free_page(__IA64_UNCACHED_OFFSET | + TO_PHYS((u64) amos_page)); return NULL; } } diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index 0d90ea58a0c..64c133344af 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -78,6 +78,9 @@ config PLAT_OAKS32R config PLAT_MAPPI2 bool "Mappi-II(M3A-ZA36/M3A-ZA52)" +config PLAT_MAPPI3 + bool "Mappi-III(M3A-2170)" + endchoice choice @@ -134,6 +137,7 @@ config BUS_CLOCK int "Bus Clock [Hz] (integer)" default "70000000" if PLAT_MAPPI default "25000000" if PLAT_USRV + default "50000000" if PLAT_MAPPI3 default "50000000" if PLAT_M32700UT default "50000000" if PLAT_OPSPUT default "33333333" if PLAT_OAKS32R @@ -149,7 +153,7 @@ config CPU_LITTLE_ENDIAN config MEMORY_START hex "Physical memory start address (hex)" - default "08000000" if PLAT_MAPPI || PLAT_MAPPI2 + default "08000000" if PLAT_MAPPI || PLAT_MAPPI2 || PLAT_MAPPI3 default "08000000" if PLAT_USRV default "08000000" if PLAT_M32700UT default "08000000" if PLAT_OPSPUT @@ -157,6 +161,7 @@ config MEMORY_START config MEMORY_SIZE hex "Physical memory size (hex)" + default "08000000" if PLAT_MAPPI3 default "04000000" if PLAT_MAPPI || PLAT_MAPPI2 default "02000000" if PLAT_USRV default "01000000" if PLAT_M32700UT diff --git a/arch/m32r/boot/compressed/m32r_sio.c b/arch/m32r/boot/compressed/m32r_sio.c index bad5475eff9..8f9a57271f8 100644 --- a/arch/m32r/boot/compressed/m32r_sio.c +++ b/arch/m32r/boot/compressed/m32r_sio.c @@ -6,6 +6,7 @@ */ #include <linux/config.h> +#include <asm/processor.h> static void putc(char c); @@ -38,16 +39,17 @@ static int puts(const char *s) static void putc(char c) { - - while ((*BOOT_SIO0STS & 0x3) != 0x3) ; + while ((*BOOT_SIO0STS & 0x3) != 0x3) + cpu_relax(); if (c == '\n') { *BOOT_SIO0TXB = '\r'; - while ((*BOOT_SIO0STS & 0x3) != 0x3) ; + while ((*BOOT_SIO0STS & 0x3) != 0x3) + cpu_relax(); } *BOOT_SIO0TXB = c; } -#else /* defined(CONFIG_PLAT_M32700UT_Alpha) || defined(CONFIG_PLAT_M32700UT) */ -#ifdef CONFIG_MMU +#else /* !(CONFIG_PLAT_M32700UT_Alpha) && !(CONFIG_PLAT_M32700UT) */ +#if defined(CONFIG_PLAT_MAPPI2) #define SIO0STS (volatile unsigned short *)(0xa0efd000 + 14) #define SIO0TXB (volatile unsigned short *)(0xa0efd000 + 30) #else @@ -57,11 +59,12 @@ static void putc(char c) static void putc(char c) { - - while ((*SIO0STS & 0x1) == 0) ; + while ((*SIO0STS & 0x1) == 0) + cpu_relax(); if (c == '\n') { *SIO0TXB = '\r'; - while ((*SIO0STS & 0x1) == 0) ; + while ((*SIO0STS & 0x1) == 0) + cpu_relax(); } *SIO0TXB = c; } diff --git a/arch/m32r/defconfig b/arch/m32r/defconfig index 417c95ba87e..85309309316 100644 --- a/arch/m32r/defconfig +++ b/arch/m32r/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4 -# Wed Feb 16 21:10:44 2005 +# Linux kernel version: 2.6.12-rc5 +# Fri Jun 3 16:20:11 2005 # CONFIG_M32R=y # CONFIG_UID16 is not set @@ -16,6 +16,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -28,13 +29,15 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +47,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -65,6 +69,7 @@ CONFIG_PLAT_M32700UT=y # CONFIG_PLAT_OPSPUT is not set # CONFIG_PLAT_OAKS32R is not set # CONFIG_PLAT_MAPPI2 is not set +# CONFIG_PLAT_MAPPI3 is not set CONFIG_CHIP_M32700=y # CONFIG_CHIP_M32102 is not set # CONFIG_CHIP_VDEC2 is not set @@ -268,7 +273,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -393,18 +397,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -414,6 +406,17 @@ CONFIG_SERIO_SERPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # CONFIG_VT=y @@ -465,6 +468,10 @@ CONFIG_DS1302=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -508,8 +515,14 @@ CONFIG_VIDEO_M32R_AR_M64278=y # Graphics support # CONFIG_FB=y +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SOFT_CURSOR is not set +# CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -543,10 +556,6 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -719,8 +728,9 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_PREEMPT=y +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_FRAME_POINTER is not set diff --git a/arch/m32r/kernel/Makefile b/arch/m32r/kernel/Makefile index cfd690bf6d8..6c6b6c37663 100644 --- a/arch/m32r/kernel/Makefile +++ b/arch/m32r/kernel/Makefile @@ -10,6 +10,7 @@ obj-y := process.o entry.o traps.o align.o irq.o setup.o time.o \ obj-$(CONFIG_SMP) += smp.o smpboot.o obj-$(CONFIG_PLAT_MAPPI) += setup_mappi.o io_mappi.o obj-$(CONFIG_PLAT_MAPPI2) += setup_mappi2.o io_mappi2.o +obj-$(CONFIG_PLAT_MAPPI3) += setup_mappi3.o io_mappi3.o obj-$(CONFIG_PLAT_USRV) += setup_usrv.o io_usrv.o obj-$(CONFIG_PLAT_M32700UT) += setup_m32700ut.o io_m32700ut.o obj-$(CONFIG_PLAT_OPSPUT) += setup_opsput.o io_opsput.o @@ -17,4 +18,3 @@ obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_PLAT_OAKS32R) += setup_oaks32r.o io_oaks32r.o EXTRA_AFLAGS := -traditional - diff --git a/arch/m32r/kernel/io_m32700ut.c b/arch/m32r/kernel/io_m32700ut.c index 371ba904e96..e545b065f7e 100644 --- a/arch/m32r/kernel/io_m32700ut.c +++ b/arch/m32r/kernel/io_m32700ut.c @@ -3,8 +3,8 @@ * * Typical I/O routines for M32700UT board. * - * Copyright (c) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Takeo Takahashi + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Takeo Takahashi * * This file is subject to the terms and conditions of the GNU General * Public License. See the file "COPYING" in the main directory of this @@ -172,64 +172,21 @@ unsigned long _inl(unsigned long port) unsigned char _inb_p(unsigned long port) { - unsigned char v; - - if (port >= LAN_IOSTART && port < LAN_IOEND) - v = _ne_inb(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - return *(volatile unsigned char *)__port2addr_ata(port); - } else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned char b; - pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); - return b; - } else -#endif - v = *(volatile unsigned char *)PORT2ADDR(port); - + unsigned char v = _inb(port); delay(); return (v); } unsigned short _inw_p(unsigned long port) { - unsigned short v; - - if (port >= LAN_IOSTART && port < LAN_IOEND) - v = _ne_inw(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - return *(volatile unsigned short *)__port2addr_ata(port); - } else -#endif -#if defined(CONFIG_USB) - if(port >= 0x340 && port < 0x3a0) - return *(volatile unsigned short *)PORT2ADDR_USB(port); - else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned short w; - pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); - return w; - } else -#endif - v = *(volatile unsigned short *)PORT2ADDR(port); - + unsigned short v = _inw(port); delay(); return (v); } unsigned long _inl_p(unsigned long port) { - unsigned long v; - - v = *(volatile unsigned long *)PORT2ADDR(port); + unsigned long v = _inl(port); delay(); return (v); } @@ -287,52 +244,19 @@ void _outl(unsigned long l, unsigned long port) void _outb_p(unsigned char b, unsigned long port) { - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outb(b, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - *(volatile unsigned char *)__port2addr_ata(port) = b; - } else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); - } else -#endif - *(volatile unsigned char *)PORT2ADDR(port) = b; - + _outb(b, port); delay(); } void _outw_p(unsigned short w, unsigned long port) { - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outw(w, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - *(volatile unsigned short *)__port2addr_ata(port) = w; - } else -#endif -#if defined(CONFIG_USB) - if(port >= 0x340 && port < 0x3a0) - *(volatile unsigned short *)PORT2ADDR_USB(port) = w; - else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); - } else -#endif - *(volatile unsigned short *)PORT2ADDR(port) = w; - + _outw(w, port); delay(); } void _outl_p(unsigned long l, unsigned long port) { - *(volatile unsigned long *)PORT2ADDR(port) = l; + _outl(l, port); delay(); } diff --git a/arch/m32r/kernel/io_mappi.c b/arch/m32r/kernel/io_mappi.c index 85688ffb52f..78033165fb5 100644 --- a/arch/m32r/kernel/io_mappi.c +++ b/arch/m32r/kernel/io_mappi.c @@ -3,8 +3,8 @@ * * Typical I/O routines for Mappi board. * - * Copyright (c) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto */ #include <linux/config.h> @@ -130,57 +130,21 @@ unsigned long _inl(unsigned long port) unsigned char _inb_p(unsigned long port) { - unsigned char v; - - if (port >= 0x300 && port < 0x320) - v = _ne_inb(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned char b; - pcc_ioread(0, port, &b, sizeof(b), 1, 0); - return b; - } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { - unsigned char b; - pcc_ioread(1, port, &b, sizeof(b), 1, 0); - return b; - } else -#endif - v = *(volatile unsigned char *)PORT2ADDR(port); - + unsigned char v = _inb(port); delay(); return (v); } unsigned short _inw_p(unsigned long port) { - unsigned short v; - - if (port >= 0x300 && port < 0x320) - v = _ne_inw(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned short w; - pcc_ioread(0, port, &w, sizeof(w), 1, 0); - return w; - } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { - unsigned short w; - pcc_ioread(1, port, &w, sizeof(w), 1, 0); - return w; - } else -#endif - v = *(volatile unsigned short *)PORT2ADDR(port); - + unsigned short v = _inw(port); delay(); return (v); } unsigned long _inl_p(unsigned long port) { - unsigned long v; - - v = *(volatile unsigned long *)PORT2ADDR(port); + unsigned long v = _inl(port); delay(); return (v); } @@ -229,41 +193,19 @@ void _outl(unsigned long l, unsigned long port) void _outb_p(unsigned char b, unsigned long port) { - if (port >= 0x300 && port < 0x320) - _ne_outb(b, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite(0, port, &b, sizeof(b), 1, 0); - } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { - pcc_iowrite(1, port, &b, sizeof(b), 1, 0); - } else -#endif - *(volatile unsigned char *)PORT2ADDR(port) = b; - + _outb(b, port); delay(); } void _outw_p(unsigned short w, unsigned long port) { - if (port >= 0x300 && port < 0x320) - _ne_outw(w, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite(0, port, &w, sizeof(w), 1, 0); - } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { - pcc_iowrite(1, port, &w, sizeof(w), 1, 0); - } else -#endif - *(volatile unsigned short *)PORT2ADDR(port) = w; - + _outw(w, port); delay(); } void _outl_p(unsigned long l, unsigned long port) { - *(volatile unsigned long *)PORT2ADDR(port) = l; + _outl(l, port); delay(); } diff --git a/arch/m32r/kernel/io_mappi2.c b/arch/m32r/kernel/io_mappi2.c index 4182cd4f97c..5c03504bf65 100644 --- a/arch/m32r/kernel/io_mappi2.c +++ b/arch/m32r/kernel/io_mappi2.c @@ -3,7 +3,7 @@ * * Typical I/O routines for Mappi2 board. * - * Copyright (c) 2001-2003 Hiroyuki Kondo, Hirokazu Takata, + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, * Hitoshi Yamamoto, Mamoru Sakugawa */ @@ -25,7 +25,7 @@ extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int); extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int); extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int); extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int); -#endif /* CONFIG_PCMCIA && CONFIG_MAPPI2_CFC */ +#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */ #define PORT2ADDR(port) _port2addr(port) #define PORT2ADDR_NE(port) _port2addr_ne(port) @@ -169,64 +169,21 @@ unsigned long _inl(unsigned long port) unsigned char _inb_p(unsigned long port) { - unsigned char v; - - if (port >= LAN_IOSTART && port < LAN_IOEND) - v = _ne_inb(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - return *(volatile unsigned char *)__port2addr_ata(port); - } else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned char b; - pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); - return b; - } else -#endif - v = *(volatile unsigned char *)PORT2ADDR(port); - + unsigned char v = _inb(port); delay(); return (v); } unsigned short _inw_p(unsigned long port) { - unsigned short v; - - if (port >= LAN_IOSTART && port < LAN_IOEND) - v = _ne_inw(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - return *(volatile unsigned short *)__port2addr_ata(port); - } else -#endif -#if defined(CONFIG_USB) - if (port >= 0x340 && port < 0x3a0) - v = *(volatile unsigned short *)PORT2ADDR_USB(port); - else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned short w; - pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); - return w; - } else -#endif - v = *(volatile unsigned short *)PORT2ADDR(port); - + unsigned short v = _inw(port); delay(); return (v); } unsigned long _inl_p(unsigned long port) { - unsigned long v; - - v = *(volatile unsigned long *)PORT2ADDR(port); + unsigned long v = _inl(port); delay(); return (v); } @@ -284,52 +241,19 @@ void _outl(unsigned long l, unsigned long port) void _outb_p(unsigned char b, unsigned long port) { - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outb(b, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - *(volatile unsigned char *)__port2addr_ata(port) = b; - } else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); - } else -#endif - *(volatile unsigned char *)PORT2ADDR(port) = b; - + _outb(b, port); delay(); } void _outw_p(unsigned short w, unsigned long port) { - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outw(w, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - *(volatile unsigned short *)__port2addr_ata(port) = w; - } else -#endif -#if defined(CONFIG_USB) - if (port >= 0x340 && port < 0x3a0) - *(volatile unsigned short *)PORT2ADDR_USB(port) = w; - else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); - } else -#endif - *(volatile unsigned short *)PORT2ADDR(port) = w; - + _outw(w, port); delay(); } void _outl_p(unsigned long l, unsigned long port) { - *(volatile unsigned long *)PORT2ADDR(port) = l; + _outl(l, port); delay(); } diff --git a/arch/m32r/kernel/io_mappi3.c b/arch/m32r/kernel/io_mappi3.c new file mode 100644 index 00000000000..c80bde65785 --- /dev/null +++ b/arch/m32r/kernel/io_mappi3.c @@ -0,0 +1,378 @@ +/* + * linux/arch/m32r/kernel/io_mappi3.c + * + * Typical I/O routines for Mappi3 board. + * + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Mamoru Sakugawa + */ + +#include <linux/config.h> +#include <asm/m32r.h> +#include <asm/page.h> +#include <asm/io.h> +#include <asm/byteorder.h> + +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) +#include <linux/types.h> + +#define M32R_PCC_IOMAP_SIZE 0x1000 + +#define M32R_PCC_IOSTART0 0x1000 +#define M32R_PCC_IOEND0 (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1) + +extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int); +#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */ + +#define PORT2ADDR(port) _port2addr(port) +#define PORT2ADDR_NE(port) _port2addr_ne(port) +#define PORT2ADDR_USB(port) _port2addr_usb(port) + +static inline void *_port2addr(unsigned long port) +{ + return (void *)(port + NONCACHE_OFFSET); +} + +#define LAN_IOSTART 0x300 +#define LAN_IOEND 0x320 + +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) +static inline void *__port2addr_ata(unsigned long port) +{ + static int dummy_reg; + + switch (port) { + case 0x1f0: return (void *)0xb4002000; + case 0x1f1: return (void *)0xb4012800; + case 0x1f2: return (void *)0xb4012002; + case 0x1f3: return (void *)0xb4012802; + case 0x1f4: return (void *)0xb4012004; + case 0x1f5: return (void *)0xb4012804; + case 0x1f6: return (void *)0xb4012006; + case 0x1f7: return (void *)0xb4012806; + case 0x3f6: return (void *)0xb401200e; + default: return (void *)&dummy_reg; + } +} +#endif + +static inline void *_port2addr_ne(unsigned long port) +{ + return (void *)(port + NONCACHE_OFFSET + 0x10000000); +} + +static inline void *_port2addr_usb(unsigned long port) +{ + return (void *)(port + NONCACHE_OFFSET + 0x12000000); +} +static inline void delay(void) +{ + __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); +} + +/* + * NIC I/O function + */ + +static inline unsigned char _ne_inb(void *portp) +{ + return (unsigned char) *(volatile unsigned char *)portp; +} + +static inline unsigned short _ne_inw(void *portp) +{ + return (unsigned short)le16_to_cpu(*(volatile unsigned short *)portp); +} + +static inline void _ne_insb(void *portp, void * addr, unsigned long count) +{ + unsigned char *buf = addr; + + while (count--) + *buf++ = *(volatile unsigned char *)portp; +} + +static inline void _ne_outb(unsigned char b, void *portp) +{ + *(volatile unsigned char *)portp = (unsigned char)b; +} + +static inline void _ne_outw(unsigned short w, void *portp) +{ + *(volatile unsigned short *)portp = cpu_to_le16(w); +} + +unsigned char _inb(unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + return _ne_inb(PORT2ADDR_NE(port)); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + return *(volatile unsigned char *)__port2addr_ata(port); + } +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned char b; + pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); + return b; + } else +#endif + return *(volatile unsigned char *)PORT2ADDR(port); +} + +unsigned short _inw(unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + return _ne_inw(PORT2ADDR_NE(port)); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + return *(volatile unsigned short *)__port2addr_ata(port); + } +#endif +#if defined(CONFIG_USB) + else if (port >= 0x340 && port < 0x3a0) + return *(volatile unsigned short *)PORT2ADDR_USB(port); +#endif + +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned short w; + pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); + return w; + } else +#endif + return *(volatile unsigned short *)PORT2ADDR(port); +} + +unsigned long _inl(unsigned long port) +{ +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned long l; + pcc_ioread_word(0, port, &l, sizeof(l), 1, 0); + return l; + } else +#endif + return *(volatile unsigned long *)PORT2ADDR(port); +} + +unsigned char _inb_p(unsigned long port) +{ + unsigned char v = _inb(port); + delay(); + return (v); +} + +unsigned short _inw_p(unsigned long port) +{ + unsigned short v = _inw(port); + delay(); + return (v); +} + +unsigned long _inl_p(unsigned long port) +{ + unsigned long v = _inl(port); + delay(); + return (v); +} + +void _outb(unsigned char b, unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_outb(b, PORT2ADDR_NE(port)); + else +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + *(volatile unsigned char *)__port2addr_ata(port) = b; + } else +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); + } else +#endif + *(volatile unsigned char *)PORT2ADDR(port) = b; +} + +void _outw(unsigned short w, unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_outw(w, PORT2ADDR_NE(port)); + else +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + *(volatile unsigned short *)__port2addr_ata(port) = w; + } else +#endif +#if defined(CONFIG_USB) + if (port >= 0x340 && port < 0x3a0) + *(volatile unsigned short *)PORT2ADDR_USB(port) = w; + else +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); + } else +#endif + *(volatile unsigned short *)PORT2ADDR(port) = w; +} + +void _outl(unsigned long l, unsigned long port) +{ +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(0, port, &l, sizeof(l), 1, 0); + } else +#endif + *(volatile unsigned long *)PORT2ADDR(port) = l; +} + +void _outb_p(unsigned char b, unsigned long port) +{ + _outb(b, port); + delay(); +} + +void _outw_p(unsigned short w, unsigned long port) +{ + _outw(w, port); + delay(); +} + +void _outl_p(unsigned long l, unsigned long port) +{ + _outl(l, port); + delay(); +} + +void _insb(unsigned int port, void * addr, unsigned long count) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_insb(PORT2ADDR_NE(port), addr, count); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + unsigned char *buf = addr; + unsigned char *portp = __port2addr_ata(port); + while (count--) + *buf++ = *(volatile unsigned char *)portp; + } +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_ioread_byte(0, port, (void *)addr, sizeof(unsigned char), + count, 1); + } +#endif + else { + unsigned char *buf = addr; + unsigned char *portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned char *)portp; + } +} + +void _insw(unsigned int port, void * addr, unsigned long count) +{ + unsigned short *buf = addr; + unsigned short *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + portp = PORT2ADDR_NE(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short), + count, 1); +#endif +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; + } +} + +void _insl(unsigned int port, void * addr, unsigned long count) +{ + unsigned long *buf = addr; + unsigned long *portp; + + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned long *)portp; +} + +void _outsb(unsigned int port, const void * addr, unsigned long count) +{ + const unsigned char *buf = addr; + unsigned char *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + portp = PORT2ADDR_NE(port); + while (count--) + _ne_outb(*buf++, portp); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *(volatile unsigned char *)portp = *buf++; +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_byte(0, port, (void *)addr, sizeof(unsigned char), + count, 1); +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned char *)portp = *buf++; + } +} + +void _outsw(unsigned int port, const void * addr, unsigned long count) +{ + const unsigned short *buf = addr; + unsigned short *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + portp = PORT2ADDR_NE(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(9, port, (void *)addr, sizeof(unsigned short), + count, 1); +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; + } +} + +void _outsl(unsigned int port, const void * addr, unsigned long count) +{ + const unsigned long *buf = addr; + unsigned char *portp; + + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned long *)portp = *buf++; +} diff --git a/arch/m32r/kernel/io_oaks32r.c b/arch/m32r/kernel/io_oaks32r.c index 286964794d5..9997dddd24d 100644 --- a/arch/m32r/kernel/io_oaks32r.c +++ b/arch/m32r/kernel/io_oaks32r.c @@ -3,7 +3,7 @@ * * Typical I/O routines for OAKS32R board. * - * Copyright (c) 2001-2004 Hiroyuki Kondo, Hirokazu Takata, + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, * Hitoshi Yamamoto, Mamoru Sakugawa */ @@ -90,35 +90,21 @@ unsigned long _inl(unsigned long port) unsigned char _inb_p(unsigned long port) { - unsigned char v; - - if (port >= 0x300 && port < 0x320) - v = _ne_inb(PORT2ADDR_NE(port)); - else - v = *(volatile unsigned char *)PORT2ADDR(port); - + unsigned char v = _inb(port); delay(); return (v); } unsigned short _inw_p(unsigned long port) { - unsigned short v; - - if (port >= 0x300 && port < 0x320) - v = _ne_inw(PORT2ADDR_NE(port)); - else - v = *(volatile unsigned short *)PORT2ADDR(port); - + unsigned short v = _inw(port); delay(); return (v); } unsigned long _inl_p(unsigned long port) { - unsigned long v; - - v = *(volatile unsigned long *)PORT2ADDR(port); + unsigned long v = _inl(port); delay(); return (v); } @@ -146,27 +132,19 @@ void _outl(unsigned long l, unsigned long port) void _outb_p(unsigned char b, unsigned long port) { - if (port >= 0x300 && port < 0x320) - _ne_outb(b, PORT2ADDR_NE(port)); - else - *(volatile unsigned char *)PORT2ADDR(port) = b; - + _outb(b, port); delay(); } void _outw_p(unsigned short w, unsigned long port) { - if (port >= 0x300 && port < 0x320) - _ne_outw(w, PORT2ADDR_NE(port)); - else - *(volatile unsigned short *)PORT2ADDR(port) = w; - + _outw(w, port); delay(); } void _outl_p(unsigned long l, unsigned long port) { - *(volatile unsigned long *)PORT2ADDR(port) = l; + _outl(l, port); delay(); } diff --git a/arch/m32r/kernel/io_opsput.c b/arch/m32r/kernel/io_opsput.c index aaf42f9f76d..e34951e8156 100644 --- a/arch/m32r/kernel/io_opsput.c +++ b/arch/m32r/kernel/io_opsput.c @@ -1,10 +1,10 @@ /* - * linux/arch/m32r/kernel/io_mappi.c + * linux/arch/m32r/kernel/io_opsput.c * * Typical I/O routines for OPSPUT board. * - * Copyright (c) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Takeo Takahashi + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Takeo Takahashi * * This file is subject to the terms and conditions of the GNU General * Public License. See the file "COPYING" in the main directory of this @@ -98,7 +98,6 @@ unsigned char _inb(unsigned long port) { if (port >= LAN_IOSTART && port < LAN_IOEND) return _ne_inb(PORT2ADDR_NE(port)); - #if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { unsigned char b; @@ -118,7 +117,6 @@ unsigned short _inw(unsigned long port) else if(port >= 0x340 && port < 0x3a0) return *(volatile unsigned short *)PORT2ADDR_USB(port); #endif - #if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { unsigned short w; @@ -143,55 +141,21 @@ unsigned long _inl(unsigned long port) unsigned char _inb_p(unsigned long port) { - unsigned char v; - - if (port >= LAN_IOSTART && port < LAN_IOEND) - v = _ne_inb(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned char b; - pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); - return b; - } else -#endif - v = *(volatile unsigned char *)PORT2ADDR(port); - + unsigned char v = _inb(port); delay(); return (v); } unsigned short _inw_p(unsigned long port) { - unsigned short v; - - if (port >= LAN_IOSTART && port < LAN_IOEND) - v = _ne_inw(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_USB) - if(port >= 0x340 && port < 0x3a0) - return *(volatile unsigned short *)PORT2ADDR_USB(port); - else -#endif - -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned short w; - pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); - return w; - } else -#endif - v = *(volatile unsigned short *)PORT2ADDR(port); - + unsigned short v = _inw(port); delay(); return (v); } unsigned long _inl_p(unsigned long port) { - unsigned long v; - - v = *(volatile unsigned long *)PORT2ADDR(port); + unsigned long v = _inl(port); delay(); return (v); } @@ -219,7 +183,6 @@ void _outw(unsigned short w, unsigned long port) *(volatile unsigned short *)PORT2ADDR_USB(port) = w; else #endif - #if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); @@ -240,43 +203,19 @@ void _outl(unsigned long l, unsigned long port) void _outb_p(unsigned char b, unsigned long port) { - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outb(b, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); - } else -#endif - *(volatile unsigned char *)PORT2ADDR(port) = b; - + _outb(b, port); delay(); } void _outw_p(unsigned short w, unsigned long port) { - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outw(w, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_USB) - if(port >= 0x340 && port < 0x3a0) - *(volatile unsigned short *)PORT2ADDR_USB(port) = w; - else -#endif - -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); - } else -#endif - *(volatile unsigned short *)PORT2ADDR(port) = w; - + _outw(w, port); delay(); } void _outl_p(unsigned long l, unsigned long port) { - *(volatile unsigned long *)PORT2ADDR(port) = l; + _outl(l, port); delay(); } diff --git a/arch/m32r/kernel/io_usrv.c b/arch/m32r/kernel/io_usrv.c index 27928a0b99e..9eb161dcc10 100644 --- a/arch/m32r/kernel/io_usrv.c +++ b/arch/m32r/kernel/io_usrv.c @@ -3,8 +3,8 @@ * * Typical I/O routines for uServer board. * - * Copyright (c) 2001 - 2003 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Takeo Takahashi + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Takeo Takahashi * * This file is subject to the terms and conditions of the GNU General * Public License. See the file "COPYING" in the main directory of this @@ -39,7 +39,7 @@ extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int); #define PORT2ADDR(port) _port2addr(port) -static __inline__ void *_port2addr(unsigned long port) +static inline void *_port2addr(unsigned long port) { #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) if (port >= UART0_IOSTART && port <= UART0_IOEND) @@ -50,7 +50,7 @@ static __inline__ void *_port2addr(unsigned long port) return (void *)(port + NONCACHE_OFFSET); } -static __inline__ void delay(void) +static inline void delay(void) { __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); } @@ -87,39 +87,22 @@ unsigned long _inl(unsigned long port) unsigned char _inb_p(unsigned long port) { - unsigned char b; - - if (port >= CFC_IOSTART && port <= CFC_IOEND) { - pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); - return b; - } else { - b = *(volatile unsigned char *)PORT2ADDR(port); - delay(); - return b; - } + unsigned char v = _inb(port); + delay(); + return v; } unsigned short _inw_p(unsigned long port) { - unsigned short w; - - if (port >= CFC_IOSTART && port <= CFC_IOEND) { - pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); - return w; - } else { - w = *(volatile unsigned short *)PORT2ADDR(port); - delay(); - return w; - } + unsigned short v = _inw(port); + delay(); + return v; } unsigned long _inl_p(unsigned long port) { - unsigned long v; - - v = *(volatile unsigned long *)PORT2ADDR(port); + unsigned long v = _inl(port); delay(); - return v; } @@ -149,25 +132,19 @@ void _outl(unsigned long l, unsigned long port) void _outb_p(unsigned char b, unsigned long port) { - if (port >= CFC_IOSTART && port <= CFC_IOEND) - pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); - else - *(volatile unsigned char *)PORT2ADDR(port) = b; + _outb(b, port); delay(); } void _outw_p(unsigned short w, unsigned long port) { - if (port >= CFC_IOSTART && port <= CFC_IOEND) - pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); - else - *(volatile unsigned short *)PORT2ADDR(port) = w; + _outw(w, port); delay(); } void _outl_p(unsigned long l, unsigned long port) { - *(volatile unsigned long *)PORT2ADDR(port) = l; + _outl(l, port); delay(); } diff --git a/arch/m32r/kernel/setup.c b/arch/m32r/kernel/setup.c index 4826cd6e40e..ec5674727e7 100644 --- a/arch/m32r/kernel/setup.c +++ b/arch/m32r/kernel/setup.c @@ -330,6 +330,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "Machine\t\t: Mappi Evaluation board\n"); #elif CONFIG_PLAT_MAPPI2 seq_printf(m, "Machine\t\t: Mappi-II Evaluation board\n"); +#elif CONFIG_PLAT_MAPPI3 + seq_printf(m, "Machine\t\t: Mappi-III Evaluation board\n"); #elif CONFIG_PLAT_M32700UT seq_printf(m, "Machine\t\t: M32700UT Evaluation board\n"); #elif CONFIG_PLAT_OPSPUT diff --git a/arch/m32r/kernel/setup_m32700ut.c b/arch/m32r/kernel/setup_m32700ut.c index 488aa87bab7..b014e2c1e52 100644 --- a/arch/m32r/kernel/setup_m32700ut.c +++ b/arch/m32r/kernel/setup_m32700ut.c @@ -78,13 +78,13 @@ static void shutdown_m32700ut_irq(unsigned int irq) static struct hw_interrupt_type m32700ut_irq_type = { - "M32700UT-IRQ", - startup_m32700ut_irq, - shutdown_m32700ut_irq, - enable_m32700ut_irq, - disable_m32700ut_irq, - mask_and_ack_m32700ut, - end_m32700ut_irq + .typename = "M32700UT-IRQ", + .startup = startup_m32700ut_irq, + .shutdown = shutdown_m32700ut_irq, + .enable = enable_m32700ut_irq, + .disable = disable_m32700ut_irq, + .ack = mask_and_ack_m32700ut, + .end = end_m32700ut_irq }; /* @@ -155,13 +155,13 @@ static void shutdown_m32700ut_pld_irq(unsigned int irq) static struct hw_interrupt_type m32700ut_pld_irq_type = { - "M32700UT-PLD-IRQ", - startup_m32700ut_pld_irq, - shutdown_m32700ut_pld_irq, - enable_m32700ut_pld_irq, - disable_m32700ut_pld_irq, - mask_and_ack_m32700ut_pld, - end_m32700ut_pld_irq + .typename = "M32700UT-PLD-IRQ", + .startup = startup_m32700ut_pld_irq, + .shutdown = shutdown_m32700ut_pld_irq, + .enable = enable_m32700ut_pld_irq, + .disable = disable_m32700ut_pld_irq, + .ack = mask_and_ack_m32700ut_pld, + .end = end_m32700ut_pld_irq }; /* @@ -224,13 +224,13 @@ static void shutdown_m32700ut_lanpld_irq(unsigned int irq) static struct hw_interrupt_type m32700ut_lanpld_irq_type = { - "M32700UT-PLD-LAN-IRQ", - startup_m32700ut_lanpld_irq, - shutdown_m32700ut_lanpld_irq, - enable_m32700ut_lanpld_irq, - disable_m32700ut_lanpld_irq, - mask_and_ack_m32700ut_lanpld, - end_m32700ut_lanpld_irq + .typename = "M32700UT-PLD-LAN-IRQ", + .startup = startup_m32700ut_lanpld_irq, + .shutdown = shutdown_m32700ut_lanpld_irq, + .enable = enable_m32700ut_lanpld_irq, + .disable = disable_m32700ut_lanpld_irq, + .ack = mask_and_ack_m32700ut_lanpld, + .end = end_m32700ut_lanpld_irq }; /* @@ -293,13 +293,13 @@ static void shutdown_m32700ut_lcdpld_irq(unsigned int irq) static struct hw_interrupt_type m32700ut_lcdpld_irq_type = { - "M32700UT-PLD-LCD-IRQ", - startup_m32700ut_lcdpld_irq, - shutdown_m32700ut_lcdpld_irq, - enable_m32700ut_lcdpld_irq, - disable_m32700ut_lcdpld_irq, - mask_and_ack_m32700ut_lcdpld, - end_m32700ut_lcdpld_irq + .typename = "M32700UT-PLD-LCD-IRQ", + .startup = startup_m32700ut_lcdpld_irq, + .shutdown = shutdown_m32700ut_lcdpld_irq, + .enable = enable_m32700ut_lcdpld_irq, + .disable = disable_m32700ut_lcdpld_irq, + .ack = mask_and_ack_m32700ut_lcdpld, + .end = end_m32700ut_lcdpld_irq }; void __init init_IRQ(void) diff --git a/arch/m32r/kernel/setup_mappi.c b/arch/m32r/kernel/setup_mappi.c index 1e74110f067..aaf8e569b93 100644 --- a/arch/m32r/kernel/setup_mappi.c +++ b/arch/m32r/kernel/setup_mappi.c @@ -70,13 +70,13 @@ static void shutdown_mappi_irq(unsigned int irq) static struct hw_interrupt_type mappi_irq_type = { - "MAPPI-IRQ", - startup_mappi_irq, - shutdown_mappi_irq, - enable_mappi_irq, - disable_mappi_irq, - mask_and_ack_mappi, - end_mappi_irq + .typename = "MAPPI-IRQ", + .startup = startup_mappi_irq, + .shutdown = shutdown_mappi_irq, + .enable = enable_mappi_irq, + .disable = disable_mappi_irq, + .ack = mask_and_ack_mappi, + .end = end_mappi_irq }; void __init init_IRQ(void) diff --git a/arch/m32r/kernel/setup_mappi2.c b/arch/m32r/kernel/setup_mappi2.c index 1904d465a50..38d5e9a4142 100644 --- a/arch/m32r/kernel/setup_mappi2.c +++ b/arch/m32r/kernel/setup_mappi2.c @@ -1,5 +1,5 @@ /* - * linux/arch/m32r/kernel/setup_mappi.c + * linux/arch/m32r/kernel/setup_mappi2.c * * Setup routines for Renesas MAPPI-II(M3A-ZA36) Board * @@ -79,13 +79,13 @@ static void shutdown_mappi2_irq(unsigned int irq) static struct hw_interrupt_type mappi2_irq_type = { - "MAPPI2-IRQ", - startup_mappi2_irq, - shutdown_mappi2_irq, - enable_mappi2_irq, - disable_mappi2_irq, - mask_and_ack_mappi2, - end_mappi2_irq + .typename = "MAPPI2-IRQ", + .startup = startup_mappi2_irq, + .shutdown = shutdown_mappi2_irq, + .enable = enable_mappi2_irq, + .disable = disable_mappi2_irq, + .ack = mask_and_ack_mappi2, + .end = end_mappi2_irq }; void __init init_IRQ(void) @@ -156,7 +156,6 @@ void __init init_IRQ(void) irq_desc[PLD_IRQ_CFIREQ].handler = &mappi2_irq_type; irq_desc[PLD_IRQ_CFIREQ].action = 0; irq_desc[PLD_IRQ_CFIREQ].depth = 1; /* disable nested irq */ -// icu_data[PLD_IRQ_CFIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00; icu_data[PLD_IRQ_CFIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01; disable_mappi2_irq(PLD_IRQ_CFIREQ); @@ -167,7 +166,6 @@ void __init init_IRQ(void) irq_desc[PLD_IRQ_CFC_INSERT].action = 0; irq_desc[PLD_IRQ_CFC_INSERT].depth = 1; /* disable nested irq */ icu_data[PLD_IRQ_CFC_INSERT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00; -// icu_data[PLD_IRQ_CFC_INSERT].icucr = 0; disable_mappi2_irq(PLD_IRQ_CFC_INSERT); /* ICUCR42: CFC Eject */ @@ -176,9 +174,7 @@ void __init init_IRQ(void) irq_desc[PLD_IRQ_CFC_EJECT].action = 0; irq_desc[PLD_IRQ_CFC_EJECT].depth = 1; /* disable nested irq */ icu_data[PLD_IRQ_CFC_EJECT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; -// icu_data[PLD_IRQ_CFC_EJECT].icucr = 0; disable_mappi2_irq(PLD_IRQ_CFC_EJECT); - #endif /* CONFIG_MAPPI2_CFC */ } diff --git a/arch/m32r/kernel/setup_mappi3.c b/arch/m32r/kernel/setup_mappi3.c new file mode 100644 index 00000000000..3d60a85aaec --- /dev/null +++ b/arch/m32r/kernel/setup_mappi3.c @@ -0,0 +1,208 @@ +/* + * linux/arch/m32r/kernel/setup_mappi3.c + * + * Setup routines for Renesas MAPPI-III(M3A-2170) Board + * + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Mamoru Sakugawa + */ + +#include <linux/config.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> + +#include <asm/system.h> +#include <asm/m32r.h> +#include <asm/io.h> + +#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) + +#ifndef CONFIG_SMP +typedef struct { + unsigned long icucr; /* ICU Control Register */ +} icu_data_t; +#endif /* CONFIG_SMP */ + +icu_data_t icu_data[NR_IRQS]; + +static void disable_mappi3_irq(unsigned int irq) +{ + unsigned long port, data; + + if ((irq == 0) ||(irq >= NR_IRQS)) { + printk("bad irq 0x%08x\n", irq); + return; + } + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; + outl(data, port); +} + +static void enable_mappi3_irq(unsigned int irq) +{ + unsigned long port, data; + + if ((irq == 0) ||(irq >= NR_IRQS)) { + printk("bad irq 0x%08x\n", irq); + return; + } + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; + outl(data, port); +} + +static void mask_and_ack_mappi3(unsigned int irq) +{ + disable_mappi3_irq(irq); +} + +static void end_mappi3_irq(unsigned int irq) +{ + enable_mappi3_irq(irq); +} + +static unsigned int startup_mappi3_irq(unsigned int irq) +{ + enable_mappi3_irq(irq); + return (0); +} + +static void shutdown_mappi3_irq(unsigned int irq) +{ + unsigned long port; + + port = irq2port(irq); + outl(M32R_ICUCR_ILEVEL7, port); +} + +static struct hw_interrupt_type mappi3_irq_type = +{ + .typename = "MAPPI3-IRQ", + .startup = startup_mappi3_irq, + .shutdown = shutdown_mappi3_irq, + .enable = enable_mappi3_irq, + .disable = disable_mappi3_irq, + .ack = mask_and_ack_mappi3, + .end = end_mappi3_irq +}; + +void __init init_IRQ(void) +{ +#if defined(CONFIG_SMC91X) + /* INT0 : LAN controller (SMC91111) */ + irq_desc[M32R_IRQ_INT0].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_INT0].handler = &mappi3_irq_type; + irq_desc[M32R_IRQ_INT0].action = 0; + irq_desc[M32R_IRQ_INT0].depth = 1; + icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; + disable_mappi3_irq(M32R_IRQ_INT0); +#endif /* CONFIG_SMC91X */ + + /* MFT2 : system timer */ + irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_MFT2].handler = &mappi3_irq_type; + irq_desc[M32R_IRQ_MFT2].action = 0; + irq_desc[M32R_IRQ_MFT2].depth = 1; + icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; + disable_mappi3_irq(M32R_IRQ_MFT2); + +#ifdef CONFIG_SERIAL_M32R_SIO + /* SIO0_R : uart receive data */ + irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_SIO0_R].handler = &mappi3_irq_type; + irq_desc[M32R_IRQ_SIO0_R].action = 0; + irq_desc[M32R_IRQ_SIO0_R].depth = 1; + icu_data[M32R_IRQ_SIO0_R].icucr = 0; + disable_mappi3_irq(M32R_IRQ_SIO0_R); + + /* SIO0_S : uart send data */ + irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_SIO0_S].handler = &mappi3_irq_type; + irq_desc[M32R_IRQ_SIO0_S].action = 0; + irq_desc[M32R_IRQ_SIO0_S].depth = 1; + icu_data[M32R_IRQ_SIO0_S].icucr = 0; + disable_mappi3_irq(M32R_IRQ_SIO0_S); + /* SIO1_R : uart receive data */ + irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_SIO1_R].handler = &mappi3_irq_type; + irq_desc[M32R_IRQ_SIO1_R].action = 0; + irq_desc[M32R_IRQ_SIO1_R].depth = 1; + icu_data[M32R_IRQ_SIO1_R].icucr = 0; + disable_mappi3_irq(M32R_IRQ_SIO1_R); + + /* SIO1_S : uart send data */ + irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_SIO1_S].handler = &mappi3_irq_type; + irq_desc[M32R_IRQ_SIO1_S].action = 0; + irq_desc[M32R_IRQ_SIO1_S].depth = 1; + icu_data[M32R_IRQ_SIO1_S].icucr = 0; + disable_mappi3_irq(M32R_IRQ_SIO1_S); +#endif /* CONFIG_M32R_USE_DBG_CONSOLE */ + +#if defined(CONFIG_USB) + /* INT1 : USB Host controller interrupt */ + irq_desc[M32R_IRQ_INT1].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_INT1].handler = &mappi3_irq_type; + irq_desc[M32R_IRQ_INT1].action = 0; + irq_desc[M32R_IRQ_INT1].depth = 1; + icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD01; + disable_mappi3_irq(M32R_IRQ_INT1); +#endif /* CONFIG_USB */ + + /* ICUCR40: CFC IREQ */ + irq_desc[PLD_IRQ_CFIREQ].status = IRQ_DISABLED; + irq_desc[PLD_IRQ_CFIREQ].handler = &mappi3_irq_type; + irq_desc[PLD_IRQ_CFIREQ].action = 0; + irq_desc[PLD_IRQ_CFIREQ].depth = 1; /* disable nested irq */ + icu_data[PLD_IRQ_CFIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01; + disable_mappi3_irq(PLD_IRQ_CFIREQ); + +#if defined(CONFIG_M32R_CFC) + /* ICUCR41: CFC Insert */ + irq_desc[PLD_IRQ_CFC_INSERT].status = IRQ_DISABLED; + irq_desc[PLD_IRQ_CFC_INSERT].handler = &mappi3_irq_type; + irq_desc[PLD_IRQ_CFC_INSERT].action = 0; + irq_desc[PLD_IRQ_CFC_INSERT].depth = 1; /* disable nested irq */ + icu_data[PLD_IRQ_CFC_INSERT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00; + disable_mappi3_irq(PLD_IRQ_CFC_INSERT); + + /* ICUCR42: CFC Eject */ + irq_desc[PLD_IRQ_CFC_EJECT].status = IRQ_DISABLED; + irq_desc[PLD_IRQ_CFC_EJECT].handler = &mappi3_irq_type; + irq_desc[PLD_IRQ_CFC_EJECT].action = 0; + irq_desc[PLD_IRQ_CFC_EJECT].depth = 1; /* disable nested irq */ + icu_data[PLD_IRQ_CFC_EJECT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; + disable_mappi3_irq(PLD_IRQ_CFC_EJECT); +#endif /* CONFIG_M32R_CFC */ +} + +#define LAN_IOSTART 0x300 +#define LAN_IOEND 0x320 +static struct resource smc91x_resources[] = { + [0] = { + .start = (LAN_IOSTART), + .end = (LAN_IOEND), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = M32R_IRQ_INT0, + .end = M32R_IRQ_INT0, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static int __init platform_init(void) +{ + platform_device_register(&smc91x_device); + return 0; +} +arch_initcall(platform_init); diff --git a/arch/m32r/kernel/setup_oaks32r.c b/arch/m32r/kernel/setup_oaks32r.c index b04834526c9..d656640badc 100644 --- a/arch/m32r/kernel/setup_oaks32r.c +++ b/arch/m32r/kernel/setup_oaks32r.c @@ -70,13 +70,13 @@ static void shutdown_oaks32r_irq(unsigned int irq) static struct hw_interrupt_type oaks32r_irq_type = { - "OAKS32R-IRQ", - startup_oaks32r_irq, - shutdown_oaks32r_irq, - enable_oaks32r_irq, - disable_oaks32r_irq, - mask_and_ack_mappi, - end_oaks32r_irq + .typename = "OAKS32R-IRQ", + .startup = startup_oaks32r_irq, + .shutdown = shutdown_oaks32r_irq, + .enable = enable_oaks32r_irq, + .disable = disable_oaks32r_irq, + .ack = mask_and_ack_mappi, + .end = end_oaks32r_irq }; void __init init_IRQ(void) diff --git a/arch/m32r/kernel/setup_opsput.c b/arch/m32r/kernel/setup_opsput.c index 84315e344c5..86f4cf2a86c 100644 --- a/arch/m32r/kernel/setup_opsput.c +++ b/arch/m32r/kernel/setup_opsput.c @@ -79,13 +79,13 @@ static void shutdown_opsput_irq(unsigned int irq) static struct hw_interrupt_type opsput_irq_type = { - "OPSPUT-IRQ", - startup_opsput_irq, - shutdown_opsput_irq, - enable_opsput_irq, - disable_opsput_irq, - mask_and_ack_opsput, - end_opsput_irq + .typename = "OPSPUT-IRQ", + .startup = startup_opsput_irq, + .shutdown = shutdown_opsput_irq, + .enable = enable_opsput_irq, + .disable = disable_opsput_irq, + .ack = mask_and_ack_opsput, + .end = end_opsput_irq }; /* @@ -156,13 +156,13 @@ static void shutdown_opsput_pld_irq(unsigned int irq) static struct hw_interrupt_type opsput_pld_irq_type = { - "OPSPUT-PLD-IRQ", - startup_opsput_pld_irq, - shutdown_opsput_pld_irq, - enable_opsput_pld_irq, - disable_opsput_pld_irq, - mask_and_ack_opsput_pld, - end_opsput_pld_irq + .typename = "OPSPUT-PLD-IRQ", + .startup = startup_opsput_pld_irq, + .shutdown = shutdown_opsput_pld_irq, + .enable = enable_opsput_pld_irq, + .disable = disable_opsput_pld_irq, + .ack = mask_and_ack_opsput_pld, + .end = end_opsput_pld_irq }; /* diff --git a/arch/m32r/kernel/setup_usrv.c b/arch/m32r/kernel/setup_usrv.c index fe417be5e3e..634741bf9d3 100644 --- a/arch/m32r/kernel/setup_usrv.c +++ b/arch/m32r/kernel/setup_usrv.c @@ -70,13 +70,13 @@ static void shutdown_mappi_irq(unsigned int irq) static struct hw_interrupt_type mappi_irq_type = { - "M32700-IRQ", - startup_mappi_irq, - shutdown_mappi_irq, - enable_mappi_irq, - disable_mappi_irq, - mask_and_ack_mappi, - end_mappi_irq + .typename = "M32700-IRQ", + .startup = startup_mappi_irq, + .shutdown = shutdown_mappi_irq, + .enable = enable_mappi_irq, + .disable = disable_mappi_irq, + .ack = mask_and_ack_mappi, + .end = end_mappi_irq }; /* @@ -143,13 +143,13 @@ static void shutdown_m32700ut_pld_irq(unsigned int irq) static struct hw_interrupt_type m32700ut_pld_irq_type = { - "USRV-PLD-IRQ", - startup_m32700ut_pld_irq, - shutdown_m32700ut_pld_irq, - enable_m32700ut_pld_irq, - disable_m32700ut_pld_irq, - mask_and_ack_m32700ut_pld, - end_m32700ut_pld_irq + .typename = "USRV-PLD-IRQ", + .startup = startup_m32700ut_pld_irq, + .shutdown = shutdown_m32700ut_pld_irq, + .enable = enable_m32700ut_pld_irq, + .disable = disable_m32700ut_pld_irq, + .ack = mask_and_ack_m32700ut_pld, + .end = end_m32700ut_pld_irq }; void __init init_IRQ(void) diff --git a/arch/m32r/m32700ut/defconfig.m32700ut.smp b/arch/m32r/m32700ut/defconfig.m32700ut.smp index 1c002181df7..3e607d90b5f 100644 --- a/arch/m32r/m32700ut/defconfig.m32700ut.smp +++ b/arch/m32r/m32700ut/defconfig.m32700ut.smp @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4 -# Wed Feb 16 21:10:50 2005 +# Linux kernel version: 2.6.12-rc5 +# Fri Jun 3 16:20:58 2005 # CONFIG_M32R=y # CONFIG_UID16 is not set @@ -15,6 +15,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -27,13 +28,16 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=15 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set +# CONFIG_CPUSETS is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -43,6 +47,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -65,6 +70,7 @@ CONFIG_PLAT_M32700UT=y # CONFIG_PLAT_OPSPUT is not set # CONFIG_PLAT_OAKS32R is not set # CONFIG_PLAT_MAPPI2 is not set +# CONFIG_PLAT_MAPPI3 is not set CONFIG_CHIP_M32700=y # CONFIG_CHIP_M32102 is not set # CONFIG_CHIP_VDEC2 is not set @@ -271,7 +277,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -396,18 +401,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -417,6 +410,17 @@ CONFIG_SERIO_SERPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # CONFIG_VT=y @@ -468,6 +472,10 @@ CONFIG_DS1302=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -511,8 +519,14 @@ CONFIG_VIDEO_M32R_AR_M64278=y # Graphics support # CONFIG_FB=y +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SOFT_CURSOR is not set +# CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -546,10 +560,6 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -722,8 +732,9 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_PREEMPT=y +CONFIG_LOG_BUF_SHIFT=15 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_FRAME_POINTER is not set diff --git a/arch/m32r/m32700ut/defconfig.m32700ut.up b/arch/m32r/m32700ut/defconfig.m32700ut.up index 805357f7bda..2d3e7cda8f4 100644 --- a/arch/m32r/m32700ut/defconfig.m32700ut.up +++ b/arch/m32r/m32700ut/defconfig.m32700ut.up @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4 -# Wed Feb 16 21:10:54 2005 +# Linux kernel version: 2.6.12-rc5 +# Fri Jun 3 16:21:34 2005 # CONFIG_M32R=y # CONFIG_UID16 is not set @@ -16,6 +16,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -28,13 +29,15 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +47,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -65,6 +69,7 @@ CONFIG_PLAT_M32700UT=y # CONFIG_PLAT_OPSPUT is not set # CONFIG_PLAT_OAKS32R is not set # CONFIG_PLAT_MAPPI2 is not set +# CONFIG_PLAT_MAPPI3 is not set CONFIG_CHIP_M32700=y # CONFIG_CHIP_M32102 is not set # CONFIG_CHIP_VDEC2 is not set @@ -268,7 +273,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -393,18 +397,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -414,6 +406,17 @@ CONFIG_SERIO_SERPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # CONFIG_VT=y @@ -465,6 +468,10 @@ CONFIG_DS1302=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -508,8 +515,14 @@ CONFIG_VIDEO_M32R_AR_M64278=y # Graphics support # CONFIG_FB=y +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SOFT_CURSOR is not set +# CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -543,10 +556,6 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -719,8 +728,9 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_PREEMPT=y +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_FRAME_POINTER is not set diff --git a/arch/m32r/mappi/defconfig.nommu b/arch/m32r/mappi/defconfig.nommu index 714aa6e7034..a8425fba340 100644 --- a/arch/m32r/mappi/defconfig.nommu +++ b/arch/m32r/mappi/defconfig.nommu @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4 -# Wed Feb 16 21:10:57 2005 +# Linux kernel version: 2.6.12-rc5 +# Fri Jun 3 16:21:46 2005 # CONFIG_M32R=y # CONFIG_UID16 is not set @@ -16,6 +16,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -26,13 +27,15 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -41,6 +44,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -62,6 +66,7 @@ CONFIG_PLAT_MAPPI=y # CONFIG_PLAT_OPSPUT is not set # CONFIG_PLAT_OAKS32R is not set # CONFIG_PLAT_MAPPI2 is not set +# CONFIG_PLAT_MAPPI3 is not set CONFIG_CHIP_M32700=y # CONFIG_CHIP_M32102 is not set # CONFIG_CHIP_VDEC2 is not set @@ -202,7 +207,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -325,18 +329,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -346,6 +338,17 @@ CONFIG_SERIO_SERPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # # CONFIG_VT is not set @@ -394,6 +397,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -434,10 +441,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -595,8 +598,9 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_PREEMPT=y +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_FRAME_POINTER is not set diff --git a/arch/m32r/mappi/defconfig.smp b/arch/m32r/mappi/defconfig.smp index 956a8e2f98d..1a7f3cd4224 100644 --- a/arch/m32r/mappi/defconfig.smp +++ b/arch/m32r/mappi/defconfig.smp @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4 -# Wed Feb 16 21:11:02 2005 +# Linux kernel version: 2.6.12-rc5 +# Fri Jun 3 16:21:52 2005 # CONFIG_M32R=y # CONFIG_UID16 is not set @@ -17,6 +17,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -28,13 +29,16 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=15 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +48,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -66,6 +71,7 @@ CONFIG_PLAT_MAPPI=y # CONFIG_PLAT_OPSPUT is not set # CONFIG_PLAT_OAKS32R is not set # CONFIG_PLAT_MAPPI2 is not set +# CONFIG_PLAT_MAPPI3 is not set CONFIG_CHIP_M32700=y # CONFIG_CHIP_M32102 is not set # CONFIG_CHIP_VDEC2 is not set @@ -139,8 +145,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set -CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set @@ -294,7 +300,6 @@ CONFIG_NET=y # Networking options # # CONFIG_PACKET is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -420,18 +425,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -441,6 +434,17 @@ CONFIG_SERIO=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # # CONFIG_VT is not set @@ -489,6 +493,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -529,10 +537,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -708,8 +712,9 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_PREEMPT=y +CONFIG_LOG_BUF_SHIFT=15 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_FRAME_POINTER is not set diff --git a/arch/m32r/mappi/defconfig.up b/arch/m32r/mappi/defconfig.up index c9253e94efb..38910fb7669 100644 --- a/arch/m32r/mappi/defconfig.up +++ b/arch/m32r/mappi/defconfig.up @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4 -# Wed Feb 16 21:11:07 2005 +# Linux kernel version: 2.6.12-rc5 +# Fri Jun 3 16:21:59 2005 # CONFIG_M32R=y # CONFIG_UID16 is not set @@ -17,6 +17,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -28,13 +29,15 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +47,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -65,6 +69,7 @@ CONFIG_PLAT_MAPPI=y # CONFIG_PLAT_OPSPUT is not set # CONFIG_PLAT_OAKS32R is not set # CONFIG_PLAT_MAPPI2 is not set +# CONFIG_PLAT_MAPPI3 is not set CONFIG_CHIP_M32700=y # CONFIG_CHIP_M32102 is not set # CONFIG_CHIP_VDEC2 is not set @@ -135,8 +140,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set -CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set @@ -290,7 +295,6 @@ CONFIG_NET=y # Networking options # # CONFIG_PACKET is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -416,18 +420,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -437,6 +429,17 @@ CONFIG_SERIO=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # # CONFIG_VT is not set @@ -485,6 +488,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -525,10 +532,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -704,8 +707,9 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_PREEMPT=y +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_FRAME_POINTER is not set diff --git a/arch/m32r/mappi2/defconfig.vdec2 b/arch/m32r/mappi2/defconfig.vdec2 index c14791d2730..56f287b6589 100644 --- a/arch/m32r/mappi2/defconfig.vdec2 +++ b/arch/m32r/mappi2/defconfig.vdec2 @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4 -# Wed Feb 16 21:11:10 2005 +# Linux kernel version: 2.6.12-rc5 +# Fri Jun 3 16:22:02 2005 # CONFIG_M32R=y # CONFIG_UID16 is not set @@ -16,6 +16,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -28,13 +29,15 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +47,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -65,6 +69,7 @@ CONFIG_KMOD=y # CONFIG_PLAT_OPSPUT is not set # CONFIG_PLAT_OAKS32R is not set CONFIG_PLAT_MAPPI2=y +# CONFIG_PLAT_MAPPI3 is not set # CONFIG_CHIP_M32700 is not set # CONFIG_CHIP_M32102 is not set CONFIG_CHIP_VDEC2=y @@ -264,7 +269,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -389,18 +393,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -410,6 +402,17 @@ CONFIG_SERIO_SERPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # CONFIG_VT=y @@ -460,6 +463,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -521,10 +528,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -697,8 +700,9 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_PREEMPT=y +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_FRAME_POINTER is not set diff --git a/arch/m32r/mappi3/defconfig.smp b/arch/m32r/mappi3/defconfig.smp new file mode 100644 index 00000000000..2eebe75fc07 --- /dev/null +++ b/arch/m32r/mappi3/defconfig.smp @@ -0,0 +1,751 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.12-rc5 +# Tue May 31 17:55:34 2005 +# +CONFIG_M32R=y +# CONFIG_UID16 is not set +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y + +# +# Processor type and features +# +# CONFIG_PLAT_MAPPI is not set +# CONFIG_PLAT_USRV is not set +# CONFIG_PLAT_M32700UT is not set +# CONFIG_PLAT_OPSPUT is not set +# CONFIG_PLAT_OAKS32R is not set +# CONFIG_PLAT_MAPPI2 is not set +CONFIG_PLAT_MAPPI3=y +CONFIG_CHIP_M32700=y +# CONFIG_CHIP_M32102 is not set +# CONFIG_CHIP_VDEC2 is not set +# CONFIG_CHIP_OPSP is not set +CONFIG_MMU=y +CONFIG_TLB_ENTRIES=32 +CONFIG_ISA_M32R2=y +CONFIG_ISA_DSP_LEVEL2=y +CONFIG_ISA_DUAL_ISSUE=y +CONFIG_BUS_CLOCK=10000000 +CONFIG_TIMER_DIVIDE=128 +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x08000000 +CONFIG_NOHIGHMEM=y +CONFIG_DISCONTIGMEM=y +CONFIG_IRAM_START=0x00f00000 +CONFIG_IRAM_SIZE=0x00080000 +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PREEMPT=y +# CONFIG_HAVE_DEC_LOCK is not set +CONFIG_SMP=y +# CONFIG_CHIP_M32700_TS1 is not set +CONFIG_NR_CPUS=2 +# CONFIG_NUMA is not set + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ISA is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y + +# +# PC-card bridges +# +# CONFIG_TCIC is not set +# CONFIG_M32R_PCC is not set +# CONFIG_M32R_CFC is not set + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=y +CONFIG_BLK_DEV_IDECD=m +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SMC91X=y +# CONFIG_NE2000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# PCMCIA network device support +# +# CONFIG_NET_PCMCIA is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_M32R_SIO=y +CONFIG_SERIAL_M32R_SIO_CONSOLE=y +# CONFIG_SERIAL_M32R_PLDSIO is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_DEVFS_FS=y +CONFIG_DEVFS_MOUNT=y +# CONFIG_DEVFS_DEBUG is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS_FS=y +CONFIG_JFFS_FS_VERBOSE=0 +CONFIG_JFFS_PROC_FS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +# CONFIG_JFFS2_FS_NAND is not set +# CONFIG_JFFS2_FS_NOR_ECC is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=15 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_FRAME_POINTER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/arch/m32r/mappi3/dot.gdbinit b/arch/m32r/mappi3/dot.gdbinit new file mode 100644 index 00000000000..89c22184e13 --- /dev/null +++ b/arch/m32r/mappi3/dot.gdbinit @@ -0,0 +1,224 @@ +# .gdbinit file +# $Id: dot.gdbinit,v 1.1 2005/04/11 02:21:08 sakugawa Exp $ + +# setting +set width 0d70 +set radix 0d16 +use_debug_dma + +# Initialize SDRAM controller for Mappi +define sdram_init + # SDIR0 + set *(unsigned long *)0x00ef6008 = 0x00000182 + # SDIR1 + set *(unsigned long *)0x00ef600c = 0x00000001 + # Initialize wait + shell sleep 0.1 + # MOD + set *(unsigned long *)0x00ef602c = 0x00000020 + set *(unsigned long *)0x00ef604c = 0x00000020 + # TR + set *(unsigned long *)0x00ef6028 = 0x00051502 + set *(unsigned long *)0x00ef6048 = 0x00051502 + # ADR + set *(unsigned long *)0x00ef6020 = 0x08000004 + set *(unsigned long *)0x00ef6040 = 0x0c000004 + # AutoRef On + set *(unsigned long *)0x00ef6004 = 0x00010517 + # Access enable + set *(unsigned long *)0x00ef6024 = 0x00000001 + set *(unsigned long *)0x00ef6044 = 0x00000001 +end + +# Initialize LAN controller for Mappi +define lanc_init + # Set BSEL4 + #set *(unsigned long *)0x00ef5004 = 0x0fff330f + #set *(unsigned long *)0x00ef5004 = 0x01113301 + +# set *(unsigned long *)0x00ef5004 = 0x02011101 +# set *(unsigned long *)0x00ef5004 = 0x04441104 +end + +define clock_init + set *(unsigned long *)0x00ef4010 = 2 + set *(unsigned long *)0x00ef4014 = 2 + set *(unsigned long *)0x00ef4020 = 3 + set *(unsigned long *)0x00ef4024 = 3 + set *(unsigned long *)0x00ef4004 = 0x7 +# shell sleep 0.1 +# set *(unsigned long *)0x00ef4004 = 0x5 + shell sleep 0.1 + set *(unsigned long *)0x00ef4008 = 0x0200 +end + +define port_init + set $sfrbase = 0x00ef0000 + set *(unsigned short *)0x00ef1060 = 0x5555 + set *(unsigned short *)0x00ef1062 = 0x5555 + set *(unsigned short *)0x00ef1064 = 0x5555 + set *(unsigned short *)0x00ef1066 = 0x5555 + set *(unsigned short *)0x00ef1068 = 0x5555 + set *(unsigned short *)0x00ef106a = 0x0000 + set *(unsigned short *)0x00ef106e = 0x5555 + set *(unsigned short *)0x00ef1070 = 0x5555 +end + +# MMU enable +define mmu_enable + set $evb=0x88000000 + set *(unsigned long *)0xffff0024=1 +end + +# MMU disable +define mmu_disable + set $evb=0 + set *(unsigned long *)0xffff0024=0 +end + +# Show TLB entries +define show_tlb_entries + set $i = 0 + set $addr = $arg0 + while ($i < 0d16 ) + set $tlb_tag = *(unsigned long*)$addr + set $tlb_data = *(unsigned long*)($addr + 4) + printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data + set $i = $i + 1 + set $addr = $addr + 8 + end +end +define itlb + set $itlb=0xfe000000 + show_tlb_entries $itlb +end +define dtlb + set $dtlb=0xfe000800 + show_tlb_entries $dtlb +end + +# Cache ON +define set_cache_type + set $mctype = (void*)0xfffffff8 +# chaos +# set *(unsigned long *)($mctype) = 0x0000c000 +# m32102 i-cache only + set *(unsigned long *)($mctype) = 0x00008000 +# m32102 d-cache only +# set *(unsigned long *)($mctype) = 0x00004000 +end +define cache_on + set $param = (void*)0x08001000 + set *(unsigned long *)($param) = 0x60ff6102 +end + + +# Show current task structure +define show_current + set $current = $spi & 0xffffe000 + printf "$current=0x%08lX\n",$current + print *(struct task_struct *)$current +end + +# Show user assigned task structure +define show_task + set $task = $arg0 & 0xffffe000 + printf "$task=0x%08lX\n",$task + print *(struct task_struct *)$task +end +document show_task + Show user assigned task structure + arg0 : task structure address +end + +# Show M32R registers +define show_regs + printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 + printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 + printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 + printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp + printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu + printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch + printf "EVB[0x%08lX]\n",$evb + + set $mests = *(unsigned long *)0xffff000c + set $mdeva = *(unsigned long *)0xffff0010 + printf "MESTS[0x%08lX] MDEVA[0x%08lX]\n",$mests,$mdeva +end + + +# Setup all +define setup + clock_init + shell sleep 0.1 + port_init + sdram_init +# lanc_init +# dispc_init +# set $evb=0x08000000 +end + +# Load modules +define load_modules + use_debug_dma + load +# load busybox.mot +end + +# Set kernel parameters +define set_kernel_parameters + set $param = (void*)0x08001000 + + ## MOUNT_ROOT_RDONLY + set {long}($param+0x00)=0 + ## RAMDISK_FLAGS + #set {long}($param+0x04)=0 + ## ORIG_ROOT_DEV + #set {long}($param+0x08)=0x00000100 + ## LOADER_TYPE + #set {long}($param+0x0C)=0 + ## INITRD_START + set {long}($param+0x10)=0x082a0000 + ## INITRD_SIZE + set {long}($param+0x14)=0d6200000 + + # M32R_CPUCLK + set *(unsigned long *)($param + 0x0018) = 0d100000000 + # M32R_BUSCLK + set *(unsigned long *)($param + 0x001c) = 0d50000000 + # M32R_TIMER_DIVIDE + set *(unsigned long *)($param + 0x0020) = 0d128 + + + set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/root.2.6_04 nfsaddrs=192.168.0.102:192.168.0.1:192.168.0.1:255.255.255.0:mappi: \0" + + +end + +# Boot +define boot + set_kernel_parameters + debug_chaos + set *(unsigned long *)0x00f00000=0x08002000 + set $pc=0x08002000 + set $fp=0 + del b + si +end + +# Restart +define restart + sdireset + sdireset + setup + load_modules + boot +end + +sdireset +sdireset +file vmlinux +target m32rsdi + +restart +boot diff --git a/arch/m32r/mm/extable.c b/arch/m32r/mm/extable.c index 9a97363b652..1743f23d49a 100644 --- a/arch/m32r/mm/extable.c +++ b/arch/m32r/mm/extable.c @@ -1,10 +1,8 @@ /* - * linux/arch/i386/mm/extable.c + * linux/arch/m32r/mm/extable.c */ -#include <linux/config.h> #include <linux/module.h> -#include <linux/spinlock.h> #include <asm/uaccess.h> int fixup_exception(struct pt_regs *regs) @@ -19,4 +17,3 @@ int fixup_exception(struct pt_regs *regs) return 0; } - diff --git a/arch/m32r/oaks32r/defconfig.nommu b/arch/m32r/oaks32r/defconfig.nommu index f2da9be726e..3f9fe519acb 100644 --- a/arch/m32r/oaks32r/defconfig.nommu +++ b/arch/m32r/oaks32r/defconfig.nommu @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4 -# Wed Feb 16 21:11:13 2005 +# Linux kernel version: 2.6.12-rc5 +# Fri Jun 3 16:22:04 2005 # CONFIG_M32R=y # CONFIG_UID16 is not set @@ -16,6 +16,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -26,12 +27,14 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -40,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -61,6 +65,7 @@ CONFIG_KMOD=y # CONFIG_PLAT_OPSPUT is not set CONFIG_PLAT_OAKS32R=y # CONFIG_PLAT_MAPPI2 is not set +# CONFIG_PLAT_MAPPI3 is not set # CONFIG_CHIP_M32700 is not set CONFIG_CHIP_M32102=y # CONFIG_CHIP_VDEC2 is not set @@ -92,10 +97,6 @@ CONFIG_PREEMPT=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # @@ -193,7 +194,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -311,18 +311,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -332,6 +320,17 @@ CONFIG_SERIO_SERPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # # CONFIG_VT is not set @@ -375,6 +374,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -415,10 +418,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -574,8 +573,9 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_PREEMPT=y +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_FRAME_POINTER is not set diff --git a/arch/m32r/opsput/defconfig.opsput b/arch/m32r/opsput/defconfig.opsput index a87e1ea4c30..66adec6a701 100644 --- a/arch/m32r/opsput/defconfig.opsput +++ b/arch/m32r/opsput/defconfig.opsput @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4 -# Wed Feb 16 21:11:41 2005 +# Linux kernel version: 2.6.12-rc5 +# Fri Jun 3 16:22:06 2005 # CONFIG_M32R=y # CONFIG_UID16 is not set @@ -15,6 +15,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -27,13 +28,15 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -43,6 +46,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -64,6 +68,7 @@ CONFIG_KMOD=y CONFIG_PLAT_OPSPUT=y # CONFIG_PLAT_OAKS32R is not set # CONFIG_PLAT_MAPPI2 is not set +# CONFIG_PLAT_MAPPI3 is not set # CONFIG_CHIP_M32700 is not set # CONFIG_CHIP_M32102 is not set # CONFIG_CHIP_VDEC2 is not set @@ -243,7 +248,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -368,18 +372,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -389,6 +381,17 @@ CONFIG_SERIO_SERPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # # CONFIG_VT is not set @@ -438,6 +441,10 @@ CONFIG_DS1302=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -478,10 +485,6 @@ CONFIG_DS1302=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -654,8 +657,10 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y # CONFIG_MAGIC_SYSRQ is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index 7dbf997ff20..5649fbae430 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:05:59 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:23 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -135,7 +137,6 @@ CONFIG_PARPORT_1284=y # CONFIG_AMIGA_FLOPPY=y CONFIG_AMIGA_Z2RAM=y -# CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y @@ -223,17 +224,12 @@ CONFIG_SCSI_CONSTANTS=y # # SCSI low-level drivers # -# CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_PPA is not set @@ -244,7 +240,6 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_DEBUG is not set CONFIG_A3000_SCSI=y CONFIG_A2091_SCSI=y @@ -492,7 +487,6 @@ CONFIG_HYDRA=m CONFIG_ZORRO8390=m CONFIG_APNE=m # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set @@ -620,7 +614,6 @@ CONFIG_SERIO_SERPORT=m # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index 505a2968e60..63024b0b7ac 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:00 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:27 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -497,7 +499,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 617aa73c325..6433da2d2ce 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:18 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:32 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -531,7 +533,6 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index b501db51d9e..da2a23a2146 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:19 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:37 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -496,7 +498,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 2bf6cef4f2b..51251883adf 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:21 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:41 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -498,7 +500,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index 7074f856820..15b80abfe94 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:24 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:45 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -540,7 +542,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index 61f09bc4846..f0d5534f683 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:28 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:50 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -498,7 +500,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index 69c01004ec4..1d5c46ff3c8 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:31 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:53 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -497,7 +499,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index 550ec26006c..856238634d4 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:34 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:58 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -125,7 +127,6 @@ CONFIG_FW_LOADER=m # Block devices # # CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m @@ -210,17 +211,12 @@ CONFIG_SCSI_CONSTANTS=y # # SCSI low-level drivers # -# CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_NCR53C406A is not set @@ -229,7 +225,6 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_DEBUG is not set # @@ -466,7 +461,6 @@ CONFIG_EQUALIZER=m CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set @@ -570,7 +564,6 @@ CONFIG_SERIO_Q40KBD=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index 5b5a619645a..af903b5c570 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:37 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:35:02 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -171,7 +173,6 @@ CONFIG_SCSI_CONSTANTS=y # # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set -CONFIG_SUN3_SCSI=y # # Multi-device support (RAID and LVM) @@ -487,7 +488,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index 704e42344cb..997143b7928 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:40 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:35:06 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -497,7 +499,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/defconfig b/arch/m68k/defconfig index 5b2296ecba8..7d935e48a9a 100644 --- a/arch/m68k/defconfig +++ b/arch/m68k/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:05:31 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:17 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -33,6 +33,8 @@ CONFIG_KOBJECT_UEVENT=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -355,7 +357,6 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c index 2b6c9d32b7a..c4a33f265dc 100644 --- a/arch/m68knommu/kernel/process.c +++ b/arch/m68knommu/kernel/process.c @@ -45,11 +45,13 @@ asmlinkage void ret_from_fork(void); */ void default_idle(void) { - while(1) { - if (need_resched()) - __asm__("stop #0x2000" : : : "cc"); - schedule(); + local_irq_disable(); + while (!need_resched()) { + /* This stop will re-enable interrupts */ + __asm__("stop #0x2000" : : : "cc"); + local_irq_disable(); } + local_irq_enable(); } void (*idle)(void) = default_idle; @@ -63,7 +65,12 @@ void (*idle)(void) = default_idle; void cpu_idle(void) { /* endless idle loop with no priority at all */ - idle(); + while (1) { + idle(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } } void machine_restart(char * __unused) diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index b027ce7efbc..73843c52877 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -232,7 +232,6 @@ void __init mem_init(void) #ifdef CONFIG_LIMITED_DMA set_page_address(page, lowmem_page_address(page)); #endif - set_bit(PG_highmem, &page->flags); set_page_count(page, 1); __free_page(page); totalhigh_pages++; diff --git a/arch/mips/vr41xx/common/pmu.c b/arch/mips/vr41xx/common/pmu.c index c5f1043de93..53166f3598b 100644 --- a/arch/mips/vr41xx/common/pmu.c +++ b/arch/mips/vr41xx/common/pmu.c @@ -1,7 +1,7 @@ /* * pmu.c, Power Management Unit routines for NEC VR4100 series. * - * Copyright (C) 2003-2004 Yoichi Yuasa <yuasa@hh.iij4u.or.jp> + * Copyright (C) 2003-2005 Yoichi Yuasa <yuasa@hh.iij4u.or.jp> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,7 +17,9 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/errno.h> #include <linux/init.h> +#include <linux/ioport.h> #include <linux/kernel.h> #include <linux/smp.h> #include <linux/types.h> @@ -27,20 +29,31 @@ #include <asm/reboot.h> #include <asm/system.h> -#define PMUCNT2REG KSEG1ADDR(0x0f0000c6) +#define PMU_TYPE1_BASE 0x0b0000a0UL +#define PMU_TYPE1_SIZE 0x0eUL + +#define PMU_TYPE2_BASE 0x0f0000c0UL +#define PMU_TYPE2_SIZE 0x10UL + +#define PMUCNT2REG 0x06 #define SOFTRST 0x0010 +static void __iomem *pmu_base; + +#define pmu_read(offset) readw(pmu_base + (offset)) +#define pmu_write(offset, value) writew((value), pmu_base + (offset)) + static inline void software_reset(void) { - uint16_t val; + uint16_t pmucnt2; switch (current_cpu_data.cputype) { case CPU_VR4122: case CPU_VR4131: case CPU_VR4133: - val = readw(PMUCNT2REG); - val |= SOFTRST; - writew(val, PMUCNT2REG); + pmucnt2 = pmu_read(PMUCNT2REG); + pmucnt2 |= SOFTRST; + pmu_write(PMUCNT2REG, pmucnt2); break; default: break; @@ -71,6 +84,34 @@ static void vr41xx_power_off(void) static int __init vr41xx_pmu_init(void) { + unsigned long start, size; + + switch (current_cpu_data.cputype) { + case CPU_VR4111: + case CPU_VR4121: + start = PMU_TYPE1_BASE; + size = PMU_TYPE1_SIZE; + break; + case CPU_VR4122: + case CPU_VR4131: + case CPU_VR4133: + start = PMU_TYPE2_BASE; + size = PMU_TYPE2_SIZE; + break; + default: + printk("Unexpected CPU of NEC VR4100 series\n"); + return -ENODEV; + } + + if (request_mem_region(start, size, "PMU") == NULL) + return -EBUSY; + + pmu_base = ioremap(start, size); + if (pmu_base == NULL) { + release_mem_region(start, size); + return -EBUSY; + } + _machine_restart = vr41xx_restart; _machine_halt = vr41xx_halt; _machine_power_off = vr41xx_power_off; @@ -78,4 +119,4 @@ static int __init vr41xx_pmu_init(void) return 0; } -early_initcall(vr41xx_pmu_init); +core_initcall(vr41xx_pmu_init); diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c index ebf186656af..d34bbe7ae0e 100644 --- a/arch/parisc/kernel/drivers.c +++ b/arch/parisc/kernel/drivers.c @@ -466,7 +466,7 @@ static int parisc_generic_match(struct device *dev, struct device_driver *drv) } #define pa_dev_attr(name, field, format_string) \ -static ssize_t name##_show(struct device *dev, char *buf) \ +static ssize_t name##_show(struct device *dev, struct device_attribute *attr, char *buf) \ { \ struct parisc_device *padev = to_parisc_device(dev); \ return sprintf(buf, format_string, padev->field); \ diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 600f23d7fd3..10162b187bc 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -826,11 +826,6 @@ config MPC10X_BRIDGE depends on PCORE || POWERPMC250 || LOPEC || SANDPOINT default y -config FSL_OCP - bool - depends on MPC10X_BRIDGE - default y - config MPC10X_OPENPIC bool depends on POWERPMC250 || LOPEC || SANDPOINT @@ -1083,6 +1078,23 @@ source "drivers/zorro/Kconfig" source kernel/power/Kconfig +config SECCOMP + bool "Enable seccomp to safely compute untrusted bytecode" + depends on PROC_FS + default y + help + This kernel feature is useful for number crunching applications + that may need to compute untrusted bytecode during their + execution. By using pipes or other transports made available to + the process as file descriptors supporting the read/write + syscalls, it's possible to isolate those applications in + their own address space using seccomp. Once seccomp is + enabled via /proc/<pid>/seccomp, it cannot be disabled + and the task is only allowed to execute a few safe syscalls + defined by each seccomp mode. + + If unsure, say Y. Only embedded should say N here. + endmenu config ISA_DMA_API @@ -1143,12 +1155,12 @@ config PCI_QSPAN config PCI_8260 bool - depends on PCI && 8260 && !8272 + depends on PCI && 8260 default y config 8260_PCI9 bool " Enable workaround for MPC826x erratum PCI 9" - depends on PCI_8260 + depends on PCI_8260 && !ADS8272 default y choice diff --git a/arch/ppc/boot/images/Makefile b/arch/ppc/boot/images/Makefile index f850fb0fb51..c9ac5f5fa9e 100644 --- a/arch/ppc/boot/images/Makefile +++ b/arch/ppc/boot/images/Makefile @@ -22,7 +22,8 @@ targets += uImage $(obj)/uImage: $(obj)/vmlinux.gz $(Q)rm -f $@ $(call if_changed,uimage) - @echo ' Image: $@' $(if $(wildcard $@),'is ready','not made') + @echo -n ' Image: $@ ' + @if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi # Files generated that shall be removed upon make clean clean-files := sImage vmapus vmlinux* miboot* zImage* uImage diff --git a/arch/ppc/boot/ld.script b/arch/ppc/boot/ld.script index 6ee602d8b6a..9362193742a 100644 --- a/arch/ppc/boot/ld.script +++ b/arch/ppc/boot/ld.script @@ -58,9 +58,6 @@ SECTIONS *(.ramdisk) __ramdisk_end = .; . = ALIGN(4096); - __sysmap_begin = .; - *(.sysmap) - __sysmap_end = .; CONSTRUCTORS } _edata = .; diff --git a/arch/ppc/boot/openfirmware/Makefile b/arch/ppc/boot/openfirmware/Makefile index 4eacbd8c772..03415238fab 100644 --- a/arch/ppc/boot/openfirmware/Makefile +++ b/arch/ppc/boot/openfirmware/Makefile @@ -54,13 +54,10 @@ $(images)/ramdisk.image.gz: @echo ' RAM disk image must be provided separately' @/bin/false -objcpxmon-$(CONFIG_XMON) := --add-section=.sysmap=System.map \ - --set-section-flags=.sysmap=contents,alloc,load,readonly,data quiet_cmd_genimage = GEN $@ cmd_genimage = $(OBJCOPY) -R .comment \ --add-section=.image=$(images)/vmlinux.gz \ - --set-section-flags=.image=contents,alloc,load,readonly,data \ - $(objcpxmon-y) $< $@ + --set-section-flags=.image=contents,alloc,load,readonly,data $< $@ targets += image.o $(obj)/image.o: $(obj)/dummy.o $(images)/vmlinux.gz FORCE diff --git a/arch/ppc/boot/openfirmware/common.c b/arch/ppc/boot/openfirmware/common.c index 9e6952781f1..0f46756a903 100644 --- a/arch/ppc/boot/openfirmware/common.c +++ b/arch/ppc/boot/openfirmware/common.c @@ -15,7 +15,6 @@ #include <asm/page.h> /* Information from the linker */ -extern char __sysmap_begin, __sysmap_end; extern int strcmp(const char *s1, const char *s2); extern char *avail_ram, *avail_high; @@ -116,14 +115,8 @@ void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp) void make_bi_recs(unsigned long addr, char *name, unsigned int mach, unsigned long progend) { - unsigned long sysmap_size; struct bi_record *rec; - /* Figure out the size of a possible System.map we're going to - * pass along. - * */ - sysmap_size = (unsigned long)(&__sysmap_end) - - (unsigned long)(&__sysmap_begin); /* leave a 1MB gap then align to the next 1MB boundary */ addr = _ALIGN(addr+ (1<<20) - 1, (1<<20)); @@ -147,15 +140,6 @@ void make_bi_recs(unsigned long addr, char *name, unsigned int mach, rec->size = sizeof(struct bi_record) + 2 * sizeof(unsigned long); rec = (struct bi_record *)((unsigned long)rec + rec->size); - if (sysmap_size) { - rec->tag = BI_SYSMAP; - rec->data[0] = (unsigned long)(&__sysmap_begin); - rec->data[1] = sysmap_size; - rec->size = sizeof(struct bi_record) + 2 * - sizeof(unsigned long); - rec = (struct bi_record *)((unsigned long)rec + rec->size); - } - rec->tag = BI_LAST; rec->size = sizeof(struct bi_record); rec = (struct bi_record *)((unsigned long)rec + rec->size); diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile index c28061ad598..991b4cbb83c 100644 --- a/arch/ppc/boot/simple/Makefile +++ b/arch/ppc/boot/simple/Makefile @@ -203,7 +203,7 @@ $(obj)/zvmlinux: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \ $(obj)/dummy.o $(obj)/image.o $(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/image.o $(LIBS) $(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \ - -R .stabstr -R .ramdisk -R .sysmap + -R .stabstr -R .ramdisk $(obj)/zvmlinux.initrd: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \ $(images)/vmlinux.gz $(obj)/dummy.o @@ -215,7 +215,7 @@ $(obj)/zvmlinux.initrd: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \ $(obj)/dummy.o $(obj)/image.o $(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/image.o $(LIBS) $(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \ - -R .stabstr -R .sysmap + -R .stabstr # Sort-of dummy rules, that let us format the image we want. zImage: $(images)/$(zimage-y) $(obj)/zvmlinux diff --git a/arch/ppc/boot/utils/addSystemMap.c b/arch/ppc/boot/utils/addSystemMap.c deleted file mode 100644 index 4654f891b27..00000000000 --- a/arch/ppc/boot/utils/addSystemMap.c +++ /dev/null @@ -1,186 +0,0 @@ -#include <stdio.h> -#include <stdlib.h> -#include <byteswap.h> -#include <sys/types.h> -#include <sys/stat.h> - -void xlate( char * inb, char * trb, unsigned len ) -{ - unsigned i; - for ( i=0; i<len; ++i ) { - char c = *inb++; - char c1 = c >> 4; - char c2 = c & 0xf; - if ( c1 > 9 ) - c1 = c1 + 'A' - 10; - else - c1 = c1 + '0'; - if ( c2 > 9 ) - c2 = c2 + 'A' - 10; - else - c2 = c2 + '0'; - *trb++ = c1; - *trb++ = c2; - } - *trb = 0; -} - -#define ElfHeaderSize (64 * 1024) -#define ElfPages (ElfHeaderSize / 4096) -#define KERNELBASE (0xc0000000) - -void get4k( /*istream *inf*/FILE *file, char *buf ) -{ - unsigned j; - unsigned num = fread(buf, 1, 4096, file); - for ( j=num; j<4096; ++j ) - buf[j] = 0; -} - -void put4k( /*ostream *outf*/FILE *file, char *buf ) -{ - fwrite(buf, 1, 4096, file); -} - -int main(int argc, char **argv) -{ - char inbuf[4096]; - FILE *ramDisk = NULL; - FILE *inputVmlinux = NULL; - FILE *outputVmlinux = NULL; - unsigned i = 0; - unsigned long ramFileLen = 0; - unsigned long ramLen = 0; - unsigned long roundR = 0; - unsigned long kernelLen = 0; - unsigned long actualKernelLen = 0; - unsigned long round = 0; - unsigned long roundedKernelLen = 0; - unsigned long ramStartOffs = 0; - unsigned long ramPages = 0; - unsigned long roundedKernelPages = 0; - if ( argc < 2 ) { - printf("Name of System Map file missing.\n"); - exit(1); - } - - if ( argc < 3 ) { - printf("Name of vmlinux file missing.\n"); - exit(1); - } - - if ( argc < 4 ) { - printf("Name of vmlinux output file missing.\n"); - exit(1); - } - - ramDisk = fopen(argv[1], "r"); - if ( ! ramDisk ) { - printf("System Map file \"%s\" failed to open.\n", argv[1]); - exit(1); - } - inputVmlinux = fopen(argv[2], "r"); - if ( ! inputVmlinux ) { - printf("vmlinux file \"%s\" failed to open.\n", argv[2]); - exit(1); - } - outputVmlinux = fopen(argv[3], "w"); - if ( ! outputVmlinux ) { - printf("output vmlinux file \"%s\" failed to open.\n", argv[3]); - exit(1); - } - fseek(ramDisk, 0, SEEK_END); - ramFileLen = ftell(ramDisk); - fseek(ramDisk, 0, SEEK_SET); - printf("%s file size = %ld\n", argv[1], ramFileLen); - - ramLen = ramFileLen; - - roundR = 4096 - (ramLen % 4096); - if ( roundR ) { - printf("Rounding System Map file up to a multiple of 4096, adding %ld\n", roundR); - ramLen += roundR; - } - - printf("Rounded System Map size is %ld\n", ramLen); - fseek(inputVmlinux, 0, SEEK_END); - kernelLen = ftell(inputVmlinux); - fseek(inputVmlinux, 0, SEEK_SET); - printf("kernel file size = %ld\n", kernelLen); - if ( kernelLen == 0 ) { - printf("You must have a linux kernel specified as argv[2]\n"); - exit(1); - } - - actualKernelLen = kernelLen - ElfHeaderSize; - - printf("actual kernel length (minus ELF header) = %ld\n", actualKernelLen); - - round = actualKernelLen % 4096; - roundedKernelLen = actualKernelLen; - if ( round ) - roundedKernelLen += (4096 - round); - - printf("actual kernel length rounded up to a 4k multiple = %ld\n", roundedKernelLen); - - ramStartOffs = roundedKernelLen; - ramPages = ramLen / 4096; - - printf("System map pages to copy = %ld\n", ramPages); - - // Copy 64K ELF header - for (i=0; i<(ElfPages); ++i) { - get4k( inputVmlinux, inbuf ); - put4k( outputVmlinux, inbuf ); - } - - - - roundedKernelPages = roundedKernelLen / 4096; - - fseek(inputVmlinux, ElfHeaderSize, SEEK_SET); - - { - for ( i=0; i<roundedKernelPages; ++i ) { - get4k( inputVmlinux, inbuf ); - if ( i == 0 ) { - unsigned long * p; - printf("Storing embedded_sysmap_start at 0x3c\n"); - p = (unsigned long *)(inbuf + 0x3c); - -#if (BYTE_ORDER == __BIG_ENDIAN) - *p = ramStartOffs; -#else - *p = bswap_32(ramStartOffs); -#endif - - printf("Storing embedded_sysmap_end at 0x44\n"); - p = (unsigned long *)(inbuf + 0x44); -#if (BYTE_ORDER == __BIG_ENDIAN) - *p = ramStartOffs + ramFileLen; -#else - *p = bswap_32(ramStartOffs + ramFileLen); -#endif - } - put4k( outputVmlinux, inbuf ); - } - } - - { - for ( i=0; i<ramPages; ++i ) { - get4k( ramDisk, inbuf ); - put4k( outputVmlinux, inbuf ); - } - } - - - fclose(ramDisk); - fclose(inputVmlinux); - fclose(outputVmlinux); - /* Set permission to executable */ - chmod(argv[3], S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH); - - return 0; - -} - diff --git a/arch/ppc/configs/mpc8548_cds_defconfig b/arch/ppc/configs/mpc8548_cds_defconfig new file mode 100644 index 00000000000..abe034f24b8 --- /dev/null +++ b/arch/ppc/configs/mpc8548_cds_defconfig @@ -0,0 +1,659 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.12-rc4 +# Tue May 24 22:36:27 2005 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_HAVE_DEC_LOCK=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Processor +# +# CONFIG_6xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_POWER3 is not set +# CONFIG_POWER4 is not set +# CONFIG_8xx is not set +CONFIG_E500=y +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +CONFIG_MATH_EMULATION=y +# CONFIG_CPU_FREQ is not set +# CONFIG_PM is not set +CONFIG_85xx=y +CONFIG_PPC_INDIRECT_PCI_BE=y + +# +# Freescale 85xx options +# +# CONFIG_MPC8540_ADS is not set +CONFIG_MPC8548_CDS=y +# CONFIG_MPC8555_CDS is not set +# CONFIG_MPC8560_ADS is not set +# CONFIG_SBC8560 is not set +# CONFIG_STX_GP3 is not set +CONFIG_MPC8548=y + +# +# Platform options +# +# CONFIG_SMP is not set +# CONFIG_PREEMPT is not set +# CONFIG_HIGHMEM is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y + +# +# Ethernet (1000 Mbit) +# +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ISA is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Hardware Sensors Chip support +# +# CONFIG_I2C_SENSOR is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set + +# +# Other I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/configs/mpc8555_cds_defconfig b/arch/ppc/configs/mpc8555_cds_defconfig index 728bd9e1a8f..15abebf46b9 100644 --- a/arch/ppc/configs/mpc8555_cds_defconfig +++ b/arch/ppc/configs/mpc8555_cds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc1 -# Thu Jan 20 01:25:35 2005 +# Linux kernel version: 2.6.12-rc4 +# Tue May 17 11:56:01 2005 # CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y @@ -11,6 +11,7 @@ CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # # Code maturity level options @@ -18,6 +19,7 @@ CONFIG_GENERIC_NVRAM=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -29,12 +31,14 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +48,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -62,10 +67,12 @@ CONFIG_CC_ALIGN_JUMPS=0 CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_MATH_EMULATION=y # CONFIG_CPU_FREQ is not set CONFIG_PPC_GEN550=y +# CONFIG_PM is not set CONFIG_85xx=y CONFIG_PPC_INDIRECT_PCI_BE=y @@ -76,6 +83,7 @@ CONFIG_PPC_INDIRECT_PCI_BE=y CONFIG_MPC8555_CDS=y # CONFIG_MPC8560_ADS is not set # CONFIG_SBC8560 is not set +# CONFIG_STX_GP3 is not set CONFIG_MPC8555=y CONFIG_85xx_PCI2=y @@ -90,6 +98,7 @@ CONFIG_CPM2=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y # # Bus options @@ -105,10 +114,6 @@ CONFIG_PCI_NAMES=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # Advanced setup # # CONFIG_ADVANCED_OPTIONS is not set @@ -180,7 +185,59 @@ CONFIG_IOSCHED_CFQ=y # # ATA/ATAPI/MFM/RLL support # -# CONFIG_IDE is not set +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +CONFIG_BLK_DEV_VIA82CXXX=y +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -220,7 +277,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -370,14 +426,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -387,6 +435,13 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # # CONFIG_VT is not set @@ -406,6 +461,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_CPM is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -434,6 +490,11 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # CONFIG_I2C=y @@ -456,11 +517,11 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set @@ -483,7 +544,9 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -494,9 +557,11 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -506,10 +571,12 @@ CONFIG_I2C_MPC=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -538,7 +605,6 @@ CONFIG_I2C_MPC=y # Graphics support # # CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -548,13 +614,9 @@ CONFIG_I2C_MPC=y # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -585,6 +647,10 @@ CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set + +# +# XFS support +# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -646,7 +712,6 @@ CONFIG_NFS_FS=y # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -698,7 +763,9 @@ CONFIG_CRC32=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_KGDB_CONSOLE is not set # CONFIG_SERIAL_TEXT_DEBUG is not set diff --git a/arch/ppc/kernel/cputable.c b/arch/ppc/kernel/cputable.c index 8aa5e8c6900..01c226008db 100644 --- a/arch/ppc/kernel/cputable.c +++ b/arch/ppc/kernel/cputable.c @@ -838,6 +838,17 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, }, + { /* 405EP */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x51210000, + .cpu_name = "405EP", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .icache_bsize = 32, + .dcache_bsize = 32, + }, #endif /* CONFIG_40x */ #ifdef CONFIG_44x @@ -907,6 +918,20 @@ struct cpu_spec cpu_specs[] = { .dcache_bsize = 32, .num_pmcs = 4, }, + { /* e500v2 */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x80210000, + .cpu_name = "e500v2", + /* xxx - galak: add CPU_FTR_MAYBE_CAN_DOZE */ + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB | CPU_FTR_BIG_PHYS, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_SPE_COMP | + PPC_FEATURE_HAS_EFP_SINGLE | PPC_FEATURE_HAS_EFP_DOUBLE, + .icache_bsize = 32, + .dcache_bsize = 32, + .num_pmcs = 4, + }, #endif #if !CLASSIC_PPC { /* default match */ diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index 5f075dbc4ee..8377b6ca26d 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -46,26 +46,23 @@ #ifdef CONFIG_BOOKE #include "head_booke.h" +#define TRANSFER_TO_HANDLER_EXC_LEVEL(exc_level) \ + mtspr exc_level##_SPRG,r8; \ + BOOKE_LOAD_EXC_LEVEL_STACK(exc_level); \ + lwz r0,GPR10-INT_FRAME_SIZE(r8); \ + stw r0,GPR10(r11); \ + lwz r0,GPR11-INT_FRAME_SIZE(r8); \ + stw r0,GPR11(r11); \ + mfspr r8,exc_level##_SPRG + .globl mcheck_transfer_to_handler mcheck_transfer_to_handler: - mtspr MCHECK_SPRG,r8 - BOOKE_LOAD_MCHECK_STACK - lwz r0,GPR10-INT_FRAME_SIZE(r8) - stw r0,GPR10(r11) - lwz r0,GPR11-INT_FRAME_SIZE(r8) - stw r0,GPR11(r11) - mfspr r8,MCHECK_SPRG + TRANSFER_TO_HANDLER_EXC_LEVEL(MCHECK) b transfer_to_handler_full .globl crit_transfer_to_handler crit_transfer_to_handler: - mtspr CRIT_SPRG,r8 - BOOKE_LOAD_CRIT_STACK - lwz r0,GPR10-INT_FRAME_SIZE(r8) - stw r0,GPR10(r11) - lwz r0,GPR11-INT_FRAME_SIZE(r8) - stw r0,GPR11(r11) - mfspr r8,CRIT_SPRG + TRANSFER_TO_HANDLER_EXC_LEVEL(CRIT) /* fall through */ #endif @@ -202,7 +199,7 @@ _GLOBAL(DoSyscall) rlwinm r11,r11,0,~_TIFL_FORCE_NOERROR stw r11,TI_LOCAL_FLAGS(r10) lwz r11,TI_FLAGS(r10) - andi. r11,r11,_TIF_SYSCALL_TRACE + andi. r11,r11,_TIF_SYSCALL_T_OR_A bne- syscall_dotrace syscall_dotrace_cont: cmplwi 0,r0,NR_syscalls @@ -237,7 +234,7 @@ ret_from_syscall: SYNC MTMSRD(r10) lwz r9,TI_FLAGS(r12) - andi. r0,r9,(_TIF_SYSCALL_TRACE|_TIF_SIGPENDING|_TIF_NEED_RESCHED) + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED) bne- syscall_exit_work syscall_exit_cont: #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) @@ -277,7 +274,8 @@ syscall_dotrace: SAVE_NVGPRS(r1) li r0,0xc00 stw r0,TRAP(r1) - bl do_syscall_trace + addi r3,r1,STACK_FRAME_OVERHEAD + bl do_syscall_trace_enter lwz r0,GPR0(r1) /* Restore original registers */ lwz r3,GPR3(r1) lwz r4,GPR4(r1) @@ -291,7 +289,7 @@ syscall_dotrace: syscall_exit_work: stw r6,RESULT(r1) /* Save result */ stw r3,GPR3(r1) /* Update return value */ - andi. r0,r9,_TIF_SYSCALL_TRACE + andi. r0,r9,_TIF_SYSCALL_T_OR_A beq 5f ori r10,r10,MSR_EE SYNC @@ -303,7 +301,8 @@ syscall_exit_work: li r4,0xc00 stw r4,TRAP(r1) 4: - bl do_syscall_trace + addi r3,r1,STACK_FRAME_OVERHEAD + bl do_syscall_trace_leave REST_NVGPRS(r1) 2: lwz r3,GPR3(r1) @@ -627,8 +626,8 @@ sigreturn_exit: subi r1,r3,STACK_FRAME_OVERHEAD rlwinm r12,r1,0,0,18 /* current_thread_info() */ lwz r9,TI_FLAGS(r12) - andi. r0,r9,_TIF_SYSCALL_TRACE - bnel- do_syscall_trace + andi. r0,r9,_TIF_SYSCALL_T_OR_A + bnel- do_syscall_trace_leave /* fall through */ .globl ret_from_except_full @@ -781,99 +780,64 @@ exc_exit_restart_end: * time of the critical interrupt. * */ - .globl ret_from_crit_exc -ret_from_crit_exc: - REST_NVGPRS(r1) - lwz r3,_MSR(r1) - andi. r3,r3,MSR_PR - LOAD_MSR_KERNEL(r10,MSR_KERNEL) - bne user_exc_return - - lwz r0,GPR0(r1) - lwz r2,GPR2(r1) - REST_4GPRS(3, r1) - REST_2GPRS(7, r1) - - lwz r10,_XER(r1) - lwz r11,_CTR(r1) - mtspr SPRN_XER,r10 - mtctr r11 - - PPC405_ERR77(0,r1) - stwcx. r0,0,r1 /* to clear the reservation */ - - lwz r11,_LINK(r1) - mtlr r11 - lwz r10,_CCR(r1) - mtcrf 0xff,r10 #ifdef CONFIG_40x - /* avoid any possible TLB misses here by turning off MSR.DR, we - * assume the instructions here are mapped by a pinned TLB entry */ - li r10,MSR_IR - mtmsr r10 - isync - tophys(r1, r1) +#define PPC_40x_TURN_OFF_MSR_DR \ + /* avoid any possible TLB misses here by turning off MSR.DR, we \ + * assume the instructions here are mapped by a pinned TLB entry */ \ + li r10,MSR_IR; \ + mtmsr r10; \ + isync; \ + tophys(r1, r1); +#else +#define PPC_40x_TURN_OFF_MSR_DR #endif - lwz r9,_DEAR(r1) - lwz r10,_ESR(r1) - mtspr SPRN_DEAR,r9 - mtspr SPRN_ESR,r10 - lwz r11,_NIP(r1) - lwz r12,_MSR(r1) - mtspr SPRN_CSRR0,r11 - mtspr SPRN_CSRR1,r12 - lwz r9,GPR9(r1) - lwz r12,GPR12(r1) - lwz r10,GPR10(r1) - lwz r11,GPR11(r1) - lwz r1,GPR1(r1) - PPC405_ERR77_SYNC - rfci - b . /* prevent prefetch past rfci */ + +#define RET_FROM_EXC_LEVEL(exc_lvl_srr0, exc_lvl_srr1, exc_lvl_rfi) \ + REST_NVGPRS(r1); \ + lwz r3,_MSR(r1); \ + andi. r3,r3,MSR_PR; \ + LOAD_MSR_KERNEL(r10,MSR_KERNEL); \ + bne user_exc_return; \ + lwz r0,GPR0(r1); \ + lwz r2,GPR2(r1); \ + REST_4GPRS(3, r1); \ + REST_2GPRS(7, r1); \ + lwz r10,_XER(r1); \ + lwz r11,_CTR(r1); \ + mtspr SPRN_XER,r10; \ + mtctr r11; \ + PPC405_ERR77(0,r1); \ + stwcx. r0,0,r1; /* to clear the reservation */ \ + lwz r11,_LINK(r1); \ + mtlr r11; \ + lwz r10,_CCR(r1); \ + mtcrf 0xff,r10; \ + PPC_40x_TURN_OFF_MSR_DR; \ + lwz r9,_DEAR(r1); \ + lwz r10,_ESR(r1); \ + mtspr SPRN_DEAR,r9; \ + mtspr SPRN_ESR,r10; \ + lwz r11,_NIP(r1); \ + lwz r12,_MSR(r1); \ + mtspr exc_lvl_srr0,r11; \ + mtspr exc_lvl_srr1,r12; \ + lwz r9,GPR9(r1); \ + lwz r12,GPR12(r1); \ + lwz r10,GPR10(r1); \ + lwz r11,GPR11(r1); \ + lwz r1,GPR1(r1); \ + PPC405_ERR77_SYNC; \ + exc_lvl_rfi; \ + b .; /* prevent prefetch past exc_lvl_rfi */ + + .globl ret_from_crit_exc +ret_from_crit_exc: + RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, RFCI) #ifdef CONFIG_BOOKE -/* - * Return from a machine check interrupt, similar to a critical - * interrupt. - */ .globl ret_from_mcheck_exc ret_from_mcheck_exc: - REST_NVGPRS(r1) - lwz r3,_MSR(r1) - andi. r3,r3,MSR_PR - LOAD_MSR_KERNEL(r10,MSR_KERNEL) - bne user_exc_return - - lwz r0,GPR0(r1) - lwz r2,GPR2(r1) - REST_4GPRS(3, r1) - REST_2GPRS(7, r1) - - lwz r10,_XER(r1) - lwz r11,_CTR(r1) - mtspr SPRN_XER,r10 - mtctr r11 - - stwcx. r0,0,r1 /* to clear the reservation */ - - lwz r11,_LINK(r1) - mtlr r11 - lwz r10,_CCR(r1) - mtcrf 0xff,r10 - lwz r9,_DEAR(r1) - lwz r10,_ESR(r1) - mtspr SPRN_DEAR,r9 - mtspr SPRN_ESR,r10 - lwz r11,_NIP(r1) - lwz r12,_MSR(r1) - mtspr SPRN_MCSRR0,r11 - mtspr SPRN_MCSRR1,r12 - lwz r9,GPR9(r1) - lwz r12,GPR12(r1) - lwz r10,GPR10(r1) - lwz r11,GPR11(r1) - lwz r1,GPR1(r1) - RFMCI + RET_FROM_EXC_LEVEL(SPRN_MCSRR0, SPRN_MCSRR1, RFMCI) #endif /* CONFIG_BOOKE */ /* diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S index 9b6a8e51365..6c7ae605246 100644 --- a/arch/ppc/kernel/head_44x.S +++ b/arch/ppc/kernel/head_44x.S @@ -330,8 +330,9 @@ interrupt_base: /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - andis. r11, r10, 0x8000 - beq 3f + lis r11, TASK_SIZE@h + cmplw r10, r11 + blt+ 3f lis r11, swapper_pg_dir@h ori r11, r11, swapper_pg_dir@l @@ -464,8 +465,9 @@ interrupt_base: /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - andis. r11, r10, 0x8000 - beq 3f + lis r11, TASK_SIZE@h + cmplw r10, r11 + blt+ 3f lis r11, swapper_pg_dir@h ori r11, r11, swapper_pg_dir@l @@ -533,8 +535,9 @@ interrupt_base: /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - andis. r11, r10, 0x8000 - beq 3f + lis r11, TASK_SIZE@h + cmplw r10, r11 + blt+ 3f lis r11, swapper_pg_dir@h ori r11, r11, swapper_pg_dir@l diff --git a/arch/ppc/kernel/head_4xx.S b/arch/ppc/kernel/head_4xx.S index 6f5d380e234..23fb51819ba 100644 --- a/arch/ppc/kernel/head_4xx.S +++ b/arch/ppc/kernel/head_4xx.S @@ -291,8 +291,9 @@ label: /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - andis. r11, r10, 0x8000 - beq 3f + lis r11, TASK_SIZE@h + cmplw r10, r11 + blt+ 3f lis r11, swapper_pg_dir@h ori r11, r11, swapper_pg_dir@l li r9, 0 @@ -479,8 +480,9 @@ label: /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - andis. r11, r10, 0x8000 - beq 3f + lis r11, TASK_SIZE@h + cmplw r10, r11 + blt+ 3f lis r11, swapper_pg_dir@h ori r11, r11, swapper_pg_dir@l li r9, 0 @@ -578,8 +580,9 @@ label: /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - andis. r11, r10, 0x8000 - beq 3f + lis r11, TASK_SIZE@h + cmplw r10, r11 + blt+ 3f lis r11, swapper_pg_dir@h ori r11, r11, swapper_pg_dir@l li r9, 0 diff --git a/arch/ppc/kernel/head_booke.h b/arch/ppc/kernel/head_booke.h index f213d12eec0..9c50f9d2657 100644 --- a/arch/ppc/kernel/head_booke.h +++ b/arch/ppc/kernel/head_booke.h @@ -67,46 +67,36 @@ #define CRIT_STACK_TOP (exception_stack_top) #ifdef CONFIG_SMP -#define BOOKE_LOAD_CRIT_STACK \ +#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \ mfspr r8,SPRN_PIR; \ mulli r8,r8,BOOKE_EXCEPTION_STACK_SIZE; \ neg r8,r8; \ - addis r8,r8,CRIT_STACK_TOP@ha; \ - addi r8,r8,CRIT_STACK_TOP@l -#define BOOKE_LOAD_MCHECK_STACK \ - mfspr r8,SPRN_PIR; \ - mulli r8,r8,BOOKE_EXCEPTION_STACK_SIZE; \ - neg r8,r8; \ - addis r8,r8,MCHECK_STACK_TOP@ha; \ - addi r8,r8,MCHECK_STACK_TOP@l + addis r8,r8,level##_STACK_TOP@ha; \ + addi r8,r8,level##_STACK_TOP@l #else -#define BOOKE_LOAD_CRIT_STACK \ - lis r8,CRIT_STACK_TOP@h; \ - ori r8,r8,CRIT_STACK_TOP@l -#define BOOKE_LOAD_MCHECK_STACK \ - lis r8,MCHECK_STACK_TOP@h; \ - ori r8,r8,MCHECK_STACK_TOP@l +#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \ + lis r8,level##_STACK_TOP@h; \ + ori r8,r8,level##_STACK_TOP@l #endif /* - * Exception prolog for critical exceptions. This is a little different - * from the normal exception prolog above since a critical exception - * can potentially occur at any point during normal exception processing. - * Thus we cannot use the same SPRG registers as the normal prolog above. - * Instead we use a portion of the critical exception stack at low physical - * addresses. + * Exception prolog for critical/machine check exceptions. This is a + * little different from the normal exception prolog above since a + * critical/machine check exception can potentially occur at any point + * during normal exception processing. Thus we cannot use the same SPRG + * registers as the normal prolog above. Instead we use a portion of the + * critical/machine check exception stack at low physical addresses. */ - -#define CRITICAL_EXCEPTION_PROLOG \ - mtspr CRIT_SPRG,r8; \ - BOOKE_LOAD_CRIT_STACK; /* r8 points to the crit stack */ \ +#define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, exc_level_srr0, exc_level_srr1) \ + mtspr exc_level##_SPRG,r8; \ + BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \ stw r10,GPR10-INT_FRAME_SIZE(r8); \ stw r11,GPR11-INT_FRAME_SIZE(r8); \ mfcr r10; /* save CR in r10 for now */\ - mfspr r11,SPRN_CSRR1; /* check whether user or kernel */\ + mfspr r11,exc_level_srr1; /* check whether user or kernel */\ andi. r11,r11,MSR_PR; \ mr r11,r8; \ - mfspr r8,CRIT_SPRG; \ + mfspr r8,exc_level##_SPRG; \ beq 1f; \ /* COMING FROM USER MODE */ \ mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\ @@ -122,9 +112,9 @@ stw r12,_DEAR(r11); /* since they may have had stuff */\ mfspr r9,SPRN_ESR; /* in them at the point where the */\ stw r9,_ESR(r11); /* exception was taken */\ - mfspr r12,SPRN_CSRR0; \ + mfspr r12,exc_level_srr0; \ stw r1,GPR1(r11); \ - mfspr r9,SPRN_CSRR1; \ + mfspr r9,exc_level_srr1; \ stw r1,0(r11); \ mr r1,r11; \ rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ @@ -132,45 +122,10 @@ SAVE_4GPRS(3, r11); \ SAVE_2GPRS(7, r11) -/* - * Exception prolog for machine check exceptions. This is similar to - * the critical exception prolog, except that machine check exceptions - * have their stack. - */ -#define MCHECK_EXCEPTION_PROLOG \ - mtspr MCHECK_SPRG,r8; \ - BOOKE_LOAD_MCHECK_STACK; /* r8 points to the mcheck stack */\ - stw r10,GPR10-INT_FRAME_SIZE(r8); \ - stw r11,GPR11-INT_FRAME_SIZE(r8); \ - mfcr r10; /* save CR in r10 for now */\ - mfspr r11,SPRN_MCSRR1; /* check whether user or kernel */\ - andi. r11,r11,MSR_PR; \ - mr r11,r8; \ - mfspr r8,MCHECK_SPRG; \ - beq 1f; \ - /* COMING FROM USER MODE */ \ - mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\ - lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\ - addi r11,r11,THREAD_SIZE; \ -1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\ - stw r10,_CCR(r11); /* save various registers */\ - stw r12,GPR12(r11); \ - stw r9,GPR9(r11); \ - mflr r10; \ - stw r10,_LINK(r11); \ - mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\ - stw r12,_DEAR(r11); /* since they may have had stuff */\ - mfspr r9,SPRN_ESR; /* in them at the point where the */\ - stw r9,_ESR(r11); /* exception was taken */\ - mfspr r12,SPRN_MCSRR0; \ - stw r1,GPR1(r11); \ - mfspr r9,SPRN_MCSRR1; \ - stw r1,0(r11); \ - mr r1,r11; \ - rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ - stw r0,GPR0(r11); \ - SAVE_4GPRS(3, r11); \ - SAVE_2GPRS(7, r11) +#define CRITICAL_EXCEPTION_PROLOG \ + EXC_LEVEL_EXCEPTION_PROLOG(CRIT, SPRN_CSRR0, SPRN_CSRR1) +#define MCHECK_EXCEPTION_PROLOG \ + EXC_LEVEL_EXCEPTION_PROLOG(MCHECK, SPRN_MCSRR0, SPRN_MCSRR1) /* * Exception vectors. @@ -237,7 +192,6 @@ label: EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \ ret_from_except) - /* Check for a single step debug exception while in an exception * handler before state has been saved. This is to catch the case * where an instruction that we are trying to single step causes @@ -291,7 +245,7 @@ label: lwz r9,GPR9(r11); \ lwz r12,GPR12(r11); \ mtspr CRIT_SPRG,r8; \ - BOOKE_LOAD_CRIT_STACK; /* r8 points to the crit stack */ \ + BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */ \ lwz r10,GPR10-INT_FRAME_SIZE(r8); \ lwz r11,GPR11-INT_FRAME_SIZE(r8); \ mfspr r8,CRIT_SPRG; \ diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S index f22ddce3613..ce36e88ba62 100644 --- a/arch/ppc/kernel/head_fsl_booke.S +++ b/arch/ppc/kernel/head_fsl_booke.S @@ -232,7 +232,8 @@ skpinv: addi r6,r6,1 /* Increment */ tlbwe /* 7. Jump to KERNELBASE mapping */ - li r7,0 + lis r7,MSR_KERNEL@h + ori r7,r7,MSR_KERNEL@l bl 1f /* Find our address */ 1: mflr r9 rlwimi r6,r9,0,20,31 @@ -293,6 +294,18 @@ skpinv: addi r6,r6,1 /* Increment */ mtspr SPRN_HID0, r2 #endif +#if !defined(CONFIG_BDI_SWITCH) + /* + * The Abatron BDI JTAG debugger does not tolerate others + * mucking with the debug registers. + */ + lis r2,DBCR0_IDM@h + mtspr SPRN_DBCR0,r2 + /* clear any residual debug events */ + li r2,-1 + mtspr SPRN_DBSR,r2 +#endif + /* * This is where the main kernel code starts. */ diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S index e4f1615ec13..7329ef177a1 100644 --- a/arch/ppc/kernel/misc.S +++ b/arch/ppc/kernel/misc.S @@ -619,7 +619,7 @@ _GLOBAL(flush_instruction_cache) _GLOBAL(flush_icache_range) BEGIN_FTR_SECTION blr /* for 601, do nothing */ -END_FTR_SECTION_IFSET(PPC_FEATURE_UNIFIED_CACHE) +END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) li r5,L1_CACHE_LINE_SIZE-1 andc r3,r3,r5 subf r4,r3,r4 @@ -736,7 +736,7 @@ _GLOBAL(flush_dcache_all) _GLOBAL(__flush_dcache_icache) BEGIN_FTR_SECTION blr /* for 601, do nothing */ -END_FTR_SECTION_IFSET(PPC_FEATURE_UNIFIED_CACHE) +END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) rlwinm r3,r3,0,0,19 /* Get page base address */ li r4,4096/L1_CACHE_LINE_SIZE /* Number of lines in a page */ mtctr r4 @@ -764,7 +764,7 @@ END_FTR_SECTION_IFSET(PPC_FEATURE_UNIFIED_CACHE) _GLOBAL(__flush_dcache_icache_phys) BEGIN_FTR_SECTION blr /* for 601, do nothing */ -END_FTR_SECTION_IFSET(PPC_FEATURE_UNIFIED_CACHE) +END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) mfmsr r10 rlwinm r0,r10,0,28,26 /* clear DR */ mtmsr r0 diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c index 47a15306823..6d7b92d7245 100644 --- a/arch/ppc/kernel/pci.c +++ b/arch/ppc/kernel/pci.c @@ -1003,7 +1003,7 @@ pci_create_OF_bus_map(void) } } -static ssize_t pci_show_devspec(struct device *dev, char *buf) +static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf) { struct pci_dev *pdev; struct device_node *np; diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index 2ccb58fe4fc..d59ad07de8e 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -55,7 +55,6 @@ #define EXPORT_SYMTAB_STROPS extern void transfer_to_handler(void); -extern void do_syscall_trace(void); extern void do_IRQ(struct pt_regs *regs); extern void MachineCheckException(struct pt_regs *regs); extern void AlignmentException(struct pt_regs *regs); @@ -74,7 +73,6 @@ extern unsigned long mm_ptov (unsigned long paddr); EXPORT_SYMBOL(clear_pages); EXPORT_SYMBOL(clear_user_page); EXPORT_SYMBOL(do_signal); -EXPORT_SYMBOL(do_syscall_trace); EXPORT_SYMBOL(transfer_to_handler); EXPORT_SYMBOL(do_IRQ); EXPORT_SYMBOL(MachineCheckException); diff --git a/arch/ppc/kernel/ptrace.c b/arch/ppc/kernel/ptrace.c index 59d59a8dc24..e7aee4108de 100644 --- a/arch/ppc/kernel/ptrace.c +++ b/arch/ppc/kernel/ptrace.c @@ -27,6 +27,9 @@ #include <linux/user.h> #include <linux/security.h> #include <linux/signal.h> +#include <linux/seccomp.h> +#include <linux/audit.h> +#include <linux/module.h> #include <asm/uaccess.h> #include <asm/page.h> @@ -455,11 +458,10 @@ out: return ret; } -void do_syscall_trace(void) +static void do_syscall_trace(void) { - if (!test_thread_flag(TIF_SYSCALL_TRACE) - || !(current->ptrace & PT_PTRACED)) - return; + /* the 0x80 provides a way for the tracing parent to distinguish + between a syscall stop and SIGTRAP delivery */ ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80 : 0)); @@ -473,3 +475,33 @@ void do_syscall_trace(void) current->exit_code = 0; } } + +void do_syscall_trace_enter(struct pt_regs *regs) +{ + if (test_thread_flag(TIF_SYSCALL_TRACE) + && (current->ptrace & PT_PTRACED)) + do_syscall_trace(); + + if (unlikely(current->audit_context)) + audit_syscall_entry(current, AUDIT_ARCH_PPC, + regs->gpr[0], + regs->gpr[3], regs->gpr[4], + regs->gpr[5], regs->gpr[6]); +} + +void do_syscall_trace_leave(struct pt_regs *regs) +{ + secure_computing(regs->gpr[0]); + + if (unlikely(current->audit_context)) + audit_syscall_exit(current, + (regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, + regs->result); + + if ((test_thread_flag(TIF_SYSCALL_TRACE)) + && (current->ptrace & PT_PTRACED)) + do_syscall_trace(); +} + +EXPORT_SYMBOL(do_syscall_trace_enter); +EXPORT_SYMBOL(do_syscall_trace_leave); diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 5dfb42f1a15..c42f7532693 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -41,7 +41,7 @@ #include <asm/xmon.h> #include <asm/ocp.h> -#if defined(CONFIG_85xx) || defined(CONFIG_83xx) +#if defined(CONFIG_85xx) || defined(CONFIG_83xx) || defined(CONFIG_MPC10X_BRIDGE) #include <asm/ppc_sys.h> #endif @@ -61,8 +61,6 @@ extern void power4_idle(void); extern boot_infos_t *boot_infos; struct ide_machdep_calls ppc_ide_md; -char *sysmap; -unsigned long sysmap_size; /* Used with the BI_MEMSIZE bootinfo parameter to store the memory size value reported by the boot loader. */ @@ -249,7 +247,7 @@ int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "bogomips\t: %lu.%02lu\n", lpj / (500000/HZ), (lpj / (5000/HZ)) % 100); -#if defined(CONFIG_85xx) || defined(CONFIG_83xx) +#if defined(CONFIG_85xx) || defined(CONFIG_83xx) || defined(CONFIG_MPC10X_BRIDGE) if (cur_ppc_sys_spec->ppc_sys_name) seq_printf(m, "chipset\t\t: %s\n", cur_ppc_sys_spec->ppc_sys_name); @@ -499,7 +497,7 @@ static int __init set_preferred_console(void) { struct device_node *prom_stdout; char *name; - int offset; + int offset = 0; if (of_stdout_device == NULL) return -ENODEV; @@ -578,11 +576,6 @@ void parse_bootinfo(struct bi_record *rec) case BI_CMD_LINE: strlcpy(cmd_line, (void *)data, sizeof(cmd_line)); break; - case BI_SYSMAP: - sysmap = (char *)((data[0] >= (KERNELBASE)) ? data[0] : - (data[0]+KERNELBASE)); - sysmap_size = data[1]; - break; #ifdef CONFIG_BLK_DEV_INITRD case BI_INITRD: initrd_start = data[0] + KERNELBASE; @@ -753,6 +746,8 @@ void __init setup_arch(char **cmdline_p) strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE); *cmdline_p = cmd_line; + parse_early_param(); + /* set up the bootmem stuff with available memory */ do_init_bootmem(); if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab); diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index f8e7e324a17..2ca8ecfeefd 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -81,8 +81,10 @@ void die(const char * str, struct pt_regs * fp, long err) console_verbose(); spin_lock_irq(&die_lock); #ifdef CONFIG_PMAC_BACKLIGHT - set_backlight_enable(1); - set_backlight_level(BACKLIGHT_MAX); + if (_machine == _MACH_Pmac) { + set_backlight_enable(1); + set_backlight_level(BACKLIGHT_MAX); + } #endif printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter); #ifdef CONFIG_PREEMPT @@ -408,12 +410,7 @@ static int emulate_string_inst(struct pt_regs *regs, u32 instword) /* Early out if we are an invalid form of lswx */ if ((instword & INST_STRING_MASK) == INST_LSWX) - if ((rA >= rT) || (NB_RB >= rT) || (rT == rA) || (rT == NB_RB)) - return -EINVAL; - - /* Early out if we are an invalid form of lswi */ - if ((instword & INST_STRING_MASK) == INST_LSWI) - if ((rA >= rT) || (rT == rA)) + if ((rT == rA) || (rT == NB_RB)) return -EINVAL; EA = (rA == 0) ? 0 : regs->gpr[rA]; diff --git a/arch/ppc/lib/locks.c b/arch/ppc/lib/locks.c index 694163d696d..c450dc4b766 100644 --- a/arch/ppc/lib/locks.c +++ b/arch/ppc/lib/locks.c @@ -130,7 +130,7 @@ void _raw_read_lock(rwlock_t *rw) while (!read_can_lock(rw)) { if (--stuck == 0) { printk("_read_lock(%p) CPU#%d lock %d\n", - rw, _smp_processor_id(), rw->lock); + rw, raw_smp_processor_id(), rw->lock); stuck = INIT_STUCK; } } @@ -158,7 +158,7 @@ void _raw_write_lock(rwlock_t *rw) while (!write_can_lock(rw)) { if (--stuck == 0) { printk("write_lock(%p) CPU#%d lock %d)\n", - rw, _smp_processor_id(), rw->lock); + rw, raw_smp_processor_id(), rw->lock); stuck = INIT_STUCK; } } diff --git a/arch/ppc/lib/string.S b/arch/ppc/lib/string.S index 8d08a2eb225..36c9b97fd92 100644 --- a/arch/ppc/lib/string.S +++ b/arch/ppc/lib/string.S @@ -446,6 +446,7 @@ _GLOBAL(__copy_tofrom_user) #ifdef CONFIG_8xx /* Don't use prefetch on 8xx */ mtctr r0 + li r0,0 53: COPY_16_BYTES_WITHEX(0) bdnz 53b @@ -564,7 +565,9 @@ _GLOBAL(__copy_tofrom_user) /* or write fault in cacheline loop */ 105: li r9,1 92: li r3,LG_CACHELINE_BYTES - b 99f + mfctr r8 + add r0,r0,r8 + b 106f /* read fault in final word loop */ 108: li r9,0 b 93f @@ -585,7 +588,7 @@ _GLOBAL(__copy_tofrom_user) * r5 + (ctr << r3), and r9 is 0 for read or 1 for write. */ 99: mfctr r0 - slw r3,r0,r3 +106: slw r3,r0,r3 add. r3,r3,r5 beq 120f /* shouldn't happen */ cmpwi 0,r9,0 diff --git a/arch/ppc/mm/fsl_booke_mmu.c b/arch/ppc/mm/fsl_booke_mmu.c index 36233bdcdf8..e07990efa04 100644 --- a/arch/ppc/mm/fsl_booke_mmu.c +++ b/arch/ppc/mm/fsl_booke_mmu.c @@ -64,6 +64,8 @@ extern unsigned long total_lowmem; extern unsigned long __max_low_memory; #define MAX_LOW_MEM CONFIG_LOWMEM_SIZE +#define NUM_TLBCAMS (16) + struct tlbcam { u32 MAS0; u32 MAS1; diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c index be02a7fec2b..334ef4150d9 100644 --- a/arch/ppc/mm/init.c +++ b/arch/ppc/mm/init.c @@ -96,9 +96,6 @@ extern struct task_struct *current_set[NR_CPUS]; char *klimit = _end; struct mem_pieces phys_avail; -extern char *sysmap; -extern unsigned long sysmap_size; - /* * this tells the system to map all of ram with the segregs * (i.e. page tables) instead of the bats. @@ -179,6 +176,7 @@ void free_initmem(void) if (!have_of) FREESEC(openfirmware); printk("\n"); + ppc_md.progress = NULL; #undef FREESEC } @@ -441,12 +439,6 @@ void __init mem_init(void) if (agp_special_page) SetPageReserved(virt_to_page(agp_special_page)); #endif - if ( sysmap ) - for (addr = (unsigned long)sysmap; - addr < PAGE_ALIGN((unsigned long)sysmap+sysmap_size) ; - addr += PAGE_SIZE) - SetPageReserved(virt_to_page(addr)); - for (addr = PAGE_OFFSET; addr < (unsigned long)high_memory; addr += PAGE_SIZE) { if (!PageReserved(virt_to_page(addr))) @@ -468,7 +460,6 @@ void __init mem_init(void) struct page *page = mem_map + pfn; ClearPageReserved(page); - set_bit(PG_highmem, &page->flags); set_page_count(page, 1); __free_page(page); totalhigh_pages++; @@ -482,9 +473,7 @@ void __init mem_init(void) codepages<< (PAGE_SHIFT-10), datapages<< (PAGE_SHIFT-10), initpages<< (PAGE_SHIFT-10), (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10))); - if (sysmap) - printk("System.map loaded at 0x%08x for debugger, size: %ld bytes\n", - (unsigned int)sysmap, sysmap_size); + #ifdef CONFIG_PPC_PMAC if (agp_special_page) printk(KERN_INFO "AGP special page: 0x%08lx\n", agp_special_page); @@ -534,9 +523,6 @@ set_phys_avail(unsigned long total_memory) if (rtas_data) mem_pieces_remove(&phys_avail, rtas_data, rtas_size, 1); #endif - /* remove the sysmap pages from the available memory */ - if (sysmap) - mem_pieces_remove(&phys_avail, __pa(sysmap), sysmap_size, 1); #ifdef CONFIG_PPC_PMAC /* Because of some uninorth weirdness, we need a page of * memory as high as possible (it must be outside of the diff --git a/arch/ppc/mm/mmu_decl.h b/arch/ppc/mm/mmu_decl.h index ffcdb46997d..540f3292b22 100644 --- a/arch/ppc/mm/mmu_decl.h +++ b/arch/ppc/mm/mmu_decl.h @@ -43,6 +43,8 @@ extern int mem_init_done; extern PTE *Hash, *Hash_end; extern unsigned long Hash_size, Hash_mask; +extern unsigned int num_tlbcam_entries; + /* ...and now those things that may be slightly different between processor * architectures. -- Dan */ diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c index 5d2f3f66aef..81a3d7446d3 100644 --- a/arch/ppc/mm/pgtable.c +++ b/arch/ppc/mm/pgtable.c @@ -66,7 +66,6 @@ void setbat(int index, unsigned long virt, unsigned long phys, #ifdef HAVE_TLBCAM extern unsigned int tlbcam_index; -extern unsigned int num_tlbcam_entries; extern unsigned long v_mapped_by_tlbcam(unsigned long va); extern unsigned long p_mapped_by_tlbcam(unsigned long pa); #else /* !HAVE_TLBCAM */ diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c index b3b0f51979d..86ca5cf8126 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.c +++ b/arch/ppc/platforms/83xx/mpc834x_sys.c @@ -41,7 +41,6 @@ #include <asm/time.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/prom.h> #include <asm/ipic.h> #include <asm/bootinfo.h> #include <asm/pci-bridge.h> @@ -127,7 +126,6 @@ mpc834x_sys_map_io(void) { /* we steal the lowest ioremap addr for virt space */ io_block_mapping(VIRT_IMMRBAR, immrbar, 1024*1024, _PAGE_IO); - io_block_mapping(BCSR_VIRT_ADDR, BCSR_PHYS_ADDR, BCSR_SIZE, _PAGE_IO); } int diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.h b/arch/ppc/platforms/83xx/mpc834x_sys.h index f4d055ae19c..a2f6e49d715 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.h +++ b/arch/ppc/platforms/83xx/mpc834x_sys.h @@ -26,9 +26,14 @@ #define VIRT_IMMRBAR ((uint)0xfe000000) #define BCSR_PHYS_ADDR ((uint)0xf8000000) -#define BCSR_VIRT_ADDR ((uint)0xfe100000) #define BCSR_SIZE ((uint)(32 * 1024)) +#define BCSR_MISC_REG2_OFF 0x07 +#define BCSR_MISC_REG2_PORESET 0x01 + +#define BCSR_MISC_REG3_OFF 0x08 +#define BCSR_MISC_REG3_CNFLOCK 0x80 + #ifdef CONFIG_PCI /* PCI interrupt controller */ #define PIRQA MPC83xx_IRQ_IRQ4 diff --git a/arch/ppc/platforms/85xx/Kconfig b/arch/ppc/platforms/85xx/Kconfig index ff92e38e7da..c5bc2821d99 100644 --- a/arch/ppc/platforms/85xx/Kconfig +++ b/arch/ppc/platforms/85xx/Kconfig @@ -21,6 +21,11 @@ config MPC8540_ADS help This option enables support for the MPC 8540 ADS evaluation board. +config MPC8548_CDS + bool "Freescale MPC8548 CDS" + help + This option enablese support for the MPC8548 CDS evaluation board. + config MPC8555_CDS bool "Freescale MPC8555 CDS" help @@ -53,6 +58,11 @@ config MPC8540 depends on MPC8540_ADS default y +config MPC8548 + bool + depends on MPC8548_CDS + default y + config MPC8555 bool depends on MPC8555_CDS diff --git a/arch/ppc/platforms/85xx/Makefile b/arch/ppc/platforms/85xx/Makefile index 854fbd298ba..efdf813108f 100644 --- a/arch/ppc/platforms/85xx/Makefile +++ b/arch/ppc/platforms/85xx/Makefile @@ -2,6 +2,7 @@ # Makefile for the PowerPC 85xx linux kernel. # obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads_common.o mpc8540_ads.o +obj-$(CONFIG_MPC8548_CDS) += mpc85xx_cds_common.o obj-$(CONFIG_MPC8555_CDS) += mpc85xx_cds_common.o obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads_common.o mpc8560_ads.o obj-$(CONFIG_SBC8560) += sbc85xx.o sbc8560.o diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c index 4d857d6d633..a2ed611cd93 100644 --- a/arch/ppc/platforms/85xx/mpc8540_ads.c +++ b/arch/ppc/platforms/85xx/mpc8540_ads.c @@ -41,7 +41,6 @@ #include <asm/time.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/prom.h> #include <asm/open_pic.h> #include <asm/bootinfo.h> #include <asm/pci-bridge.h> @@ -88,7 +87,7 @@ mpc8540ads_setup_arch(void) #ifdef CONFIG_SERIAL_TEXT_DEBUG /* Invalidate the entry we stole earlier the serial ports * should be properly mapped */ - invalidate_tlbcam_entry(NUM_TLBCAMS - 1); + invalidate_tlbcam_entry(num_tlbcam_entries - 1); #endif /* setup the board related information for the enet controllers */ @@ -150,7 +149,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, struct uart_port p; /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */ - settlbcam(NUM_TLBCAMS - 1, binfo->bi_immr_base, + settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base, binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); memset(&p, 0, sizeof (p)); @@ -210,6 +209,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) ppc_md.progress = gen550_progress; #endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ +#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) + ppc_md.early_serial_map = mpc85xx_early_serial_map; +#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ if (ppc_md.progress) ppc_md.progress("mpc8540ads_init(): exit", 0); diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c index 761b8c7b25d..d87dfd5ce0a 100644 --- a/arch/ppc/platforms/85xx/mpc8560_ads.c +++ b/arch/ppc/platforms/85xx/mpc8560_ads.c @@ -41,7 +41,6 @@ #include <asm/time.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/prom.h> #include <asm/open_pic.h> #include <asm/bootinfo.h> #include <asm/pci-bridge.h> diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c index ba9f9f562c4..18e952d1767 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c @@ -36,7 +36,6 @@ #include <asm/time.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/prom.h> #include <asm/open_pic.h> #include <asm/bootinfo.h> #include <asm/pci-bridge.h> @@ -59,40 +58,8 @@ extern unsigned long total_memory; /* in mm/init */ unsigned char __res[sizeof (bd_t)]; /* Internal interrupts are all Level Sensitive, and Positive Polarity */ - static u_char mpc85xx_ads_openpic_initsenses[] __initdata = { - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: L2 Cache */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: ECM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCI/PCI-X */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: RIO Inbound Port Write Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: RIO Doorbell Inbound */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: RIO Outbound Message */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: RIO Inbound Message */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 0 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 0 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 0 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 1 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 1 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 1 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Fast Ethernet */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: CPM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */ + MPC85XX_INTERNAL_IRQ_SENSES, 0x0, /* External 0: */ #if defined(CONFIG_PCI) (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI slot 0 */ @@ -159,7 +126,7 @@ mpc85xx_ads_init_IRQ(void) /* Skip reserved space and internal sources */ openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); /* Map PIC IRQs 0-11 */ - openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000); + openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); /* we let openpic interrupts starting from an offset, to * leave space for cascading interrupts underneath. diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c index 6c020d67ad7..203b2ca61df 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c @@ -42,8 +42,8 @@ #include <asm/todc.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/prom.h> #include <asm/open_pic.h> +#include <asm/i8259.h> #include <asm/bootinfo.h> #include <asm/pci-bridge.h> #include <asm/mpc85xx.h> @@ -72,40 +72,8 @@ static int cds_pci_slot = 2; static volatile u8 * cadmus; /* Internal interrupts are all Level Sensitive, and Positive Polarity */ - static u_char mpc85xx_cds_openpic_initsenses[] __initdata = { - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: L2 Cache */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: ECM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCI/PCI-X */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: RIO Inbound Port Write Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: RIO Doorbell Inbound */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: RIO Outbound Message */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: RIO Inbound Message */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 0 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 0 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 0 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 1 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 1 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 1 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Fast Ethernet */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: CPM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */ + MPC85XX_INTERNAL_IRQ_SENSES, #if defined(CONFIG_PCI) (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 0: PCI1 slot */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI1 slot */ @@ -189,15 +157,28 @@ mpc85xx_cds_init_IRQ(void) OpenPIC_NumInitSenses = sizeof (mpc85xx_cds_openpic_initsenses); /* Skip reserved space and internal sources */ +#ifdef CONFIG_MPC8548 + openpic_set_sources(0, 48, OpenPIC_Addr + 0x10200); +#else openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); +#endif /* Map PIC IRQs 0-11 */ - openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000); + openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); /* we let openpic interrupts starting from an offset, to * leave space for cascading interrupts underneath. */ openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET); +#ifdef CONFIG_PCI + openpic_hookup_cascade(PIRQ0A, "82c59 cascade", i8259_irq); + + for (i = 0; i < NUM_8259_INTERRUPTS; i++) + irq_desc[i].handler = &i8259_pic; + + i8259_init(0); +#endif + #ifdef CONFIG_CPM2 /* Setup CPM2 PIC */ cpm2_init_IRQ(); @@ -231,7 +212,7 @@ mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) * interrupt on slot */ { { 0, 1, 2, 3 }, /* 16 - PMC */ - { 3, 0, 0, 0 }, /* 17 P2P (Tsi320) */ + { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */ { 0, 1, 2, 3 }, /* 18 - Slot 1 */ { 1, 2, 3, 0 }, /* 19 - Slot 2 */ { 2, 3, 0, 1 }, /* 20 - Slot 3 */ @@ -280,13 +261,135 @@ mpc85xx_exclude_device(u_char bus, u_char devfn) return PCIBIOS_DEVICE_NOT_FOUND; #endif /* We explicitly do not go past the Tundra 320 Bridge */ - if (bus == 1) + if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL)) return PCIBIOS_DEVICE_NOT_FOUND; if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL)) return PCIBIOS_DEVICE_NOT_FOUND; else return PCIBIOS_SUCCESSFUL; } + +void __init +mpc85xx_cds_enable_via(struct pci_controller *hose) +{ + u32 pci_class; + u16 vid, did; + + early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class); + if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI) + return; + + /* Configure P2P so that we can reach bus 1 */ + early_write_config_byte(hose, 0, 0x88, PCI_PRIMARY_BUS, 0); + early_write_config_byte(hose, 0, 0x88, PCI_SECONDARY_BUS, 1); + early_write_config_byte(hose, 0, 0x88, PCI_SUBORDINATE_BUS, 0xff); + + early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid); + early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did); + + if ((vid != PCI_VENDOR_ID_VIA) || + (did != PCI_DEVICE_ID_VIA_82C686)) + return; + + /* Enable USB and IDE functions */ + early_write_config_byte(hose, 1, 0x10, 0x48, 0x08); +} + +void __init +mpc85xx_cds_fixup_via(struct pci_controller *hose) +{ + u32 pci_class; + u16 vid, did; + + early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class); + if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI) + return; + + /* + * Force the backplane P2P bridge to have a window + * open from 0x00000000-0x00001fff in PCI I/O space. + * This allows legacy I/O (i8259, etc) on the VIA + * southbridge to be accessed. + */ + early_write_config_byte(hose, 0, 0x88, PCI_IO_BASE, 0x00); + early_write_config_word(hose, 0, 0x88, PCI_IO_BASE_UPPER16, 0x0000); + early_write_config_byte(hose, 0, 0x88, PCI_IO_LIMIT, 0x10); + early_write_config_word(hose, 0, 0x88, PCI_IO_LIMIT_UPPER16, 0x0000); + + early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid); + early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did); + if ((vid != PCI_VENDOR_ID_VIA) || + (did != PCI_DEVICE_ID_VIA_82C686)) + return; + + /* + * Since the P2P window was forced to cover the fixed + * legacy I/O addresses, it is necessary to manually + * place the base addresses for the IDE and USB functions + * within this window. + */ + /* Function 1, IDE */ + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_0, 0x1ff8); + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_1, 0x1ff4); + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_2, 0x1fe8); + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_3, 0x1fe4); + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_4, 0x1fd0); + + /* Function 2, USB ports 0-1 */ + early_write_config_dword(hose, 1, 0x12, PCI_BASE_ADDRESS_4, 0x1fa0); + + /* Function 3, USB ports 2-3 */ + early_write_config_dword(hose, 1, 0x13, PCI_BASE_ADDRESS_4, 0x1f80); + + /* Function 5, Power Management */ + early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_0, 0x1e00); + early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_1, 0x1dfc); + early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_2, 0x1df8); + + /* Function 6, AC97 Interface */ + early_write_config_dword(hose, 1, 0x16, PCI_BASE_ADDRESS_0, 0x1c00); +} + +void __init +mpc85xx_cds_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + u_char c; + + if ((dev = pci_find_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_1, NULL))) { + /* + * U-Boot does not set the enable bits + * for the IDE device. Force them on here. + */ + pci_read_config_byte(dev, 0x40, &c); + c |= 0x03; /* IDE: Chip Enable Bits */ + pci_write_config_byte(dev, 0x40, c); + + /* + * Since only primary interface works, force the + * IDE function to standard primary IDE interrupt + * w/ 8259 offset + */ + dev->irq = 14; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + } + + /* + * Force legacy USB interrupt routing + */ + if ((dev = pci_find_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_2, NULL))) { + dev->irq = 10; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10); + } + + if ((dev = pci_find_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_2, dev))) { + dev->irq = 11; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11); + } +} #endif /* CONFIG_PCI */ TODC_ALLOC(); @@ -328,6 +431,9 @@ mpc85xx_cds_setup_arch(void) loops_per_jiffy = freq / HZ; #ifdef CONFIG_PCI + /* VIA IDE configuration */ + ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup; + /* setup PCI host bridges */ mpc85xx_setup_hose(); #endif @@ -339,26 +445,52 @@ mpc85xx_cds_setup_arch(void) #ifdef CONFIG_SERIAL_TEXT_DEBUG /* Invalidate the entry we stole earlier the serial ports * should be properly mapped */ - invalidate_tlbcam_entry(NUM_TLBCAMS - 1); + invalidate_tlbcam_entry(num_tlbcam_entries - 1); #endif /* setup the board related information for the enet controllers */ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->interruptPHY = MPC85xx_IRQ_EXT5; - pdata->phyid = 0; - /* fixup phy address */ - pdata->phy_reg_addr += binfo->bi_immr_base; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->interruptPHY = MPC85xx_IRQ_EXT5; + pdata->phyid = 0; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + } pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->interruptPHY = MPC85xx_IRQ_EXT5; - pdata->phyid = 1; - /* fixup phy address */ - pdata->phy_reg_addr += binfo->bi_immr_base; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->interruptPHY = MPC85xx_IRQ_EXT5; + pdata->phyid = 1; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + } + + pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC1); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->interruptPHY = MPC85xx_IRQ_EXT5; + pdata->phyid = 0; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + } + + pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC2); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->interruptPHY = MPC85xx_IRQ_EXT5; + pdata->phyid = 1; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + } + ppc_sys_device_remove(MPC85xx_eTSEC3); + ppc_sys_device_remove(MPC85xx_eTSEC4); #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) @@ -395,7 +527,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, struct uart_port p; /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */ - settlbcam(NUM_TLBCAMS - 1, binfo->bi_immr_base, + settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base, binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); memset(&p, 0, sizeof (p)); @@ -459,6 +591,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) ppc_md.progress = gen550_progress; #endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ +#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) + ppc_md.early_serial_map = mpc85xx_early_serial_map; +#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ if (ppc_md.progress) ppc_md.progress("mpc85xx_cds_init(): exit", 0); diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h index 7627d77504b..12b292c6ae3 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h @@ -77,4 +77,7 @@ #define MPC85XX_PCI2_IO_SIZE 0x01000000 +#define NR_8259_INTS 16 +#define CPM_IRQ_OFFSET NR_8259_INTS + #endif /* __MACH_MPC85XX_CDS_H__ */ diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c index 9ab05e590c3..3dbdd73618e 100644 --- a/arch/ppc/platforms/85xx/sbc8560.c +++ b/arch/ppc/platforms/85xx/sbc8560.c @@ -41,7 +41,6 @@ #include <asm/time.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/prom.h> #include <asm/open_pic.h> #include <asm/bootinfo.h> #include <asm/pci-bridge.h> @@ -125,7 +124,7 @@ sbc8560_setup_arch(void) #ifdef CONFIG_SERIAL_TEXT_DEBUG /* Invalidate the entry we stole earlier the serial ports * should be properly mapped */ - invalidate_tlbcam_entry(NUM_TLBCAMS - 1); + invalidate_tlbcam_entry(num_tlbcam_entries - 1); #endif /* setup the board related information for the enet controllers */ @@ -176,7 +175,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, #ifdef CONFIG_SERIAL_TEXT_DEBUG /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */ - settlbcam(NUM_TLBCAMS - 1, UARTA_ADDR, + settlbcam(num_tlbcam_entries - 1, UARTA_ADDR, UARTA_ADDR, 0x1000, _PAGE_IO, 0); #endif @@ -221,6 +220,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) ppc_md.progress = gen550_progress; #endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ +#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) + ppc_md.early_serial_map = sbc8560_early_serial_map; +#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ if (ppc_md.progress) ppc_md.progress("sbc8560_init(): exit", 0); diff --git a/arch/ppc/platforms/85xx/sbc85xx.c b/arch/ppc/platforms/85xx/sbc85xx.c index 2d638c1c1bd..4f6d1ddd6fb 100644 --- a/arch/ppc/platforms/85xx/sbc85xx.c +++ b/arch/ppc/platforms/85xx/sbc85xx.c @@ -35,7 +35,6 @@ #include <asm/time.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/prom.h> #include <asm/open_pic.h> #include <asm/bootinfo.h> #include <asm/pci-bridge.h> @@ -59,40 +58,8 @@ unsigned long pci_dram_offset = 0; extern unsigned long total_memory; /* in mm/init */ /* Internal interrupts are all Level Sensitive, and Positive Polarity */ - static u_char sbc8560_openpic_initsenses[] __initdata = { - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: L2 Cache */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: ECM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCI/PCI-X */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: RIO Inbound Port Write Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: RIO Doorbell Inbound */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: RIO Outbound Message */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: RIO Inbound Message */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 0 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 0 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 0 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 1 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 1 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 1 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Fast Ethernet */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: CPM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */ + MPC85XX_INTERNAL_IRQ_SENSES, 0x0, /* External 0: */ 0x0, /* External 1: */ #if defined(CONFIG_PCI) @@ -159,7 +126,7 @@ sbc8560_init_IRQ(void) /* Skip reserved space and internal sources */ openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); /* Map PIC IRQs 0-11 */ - openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000); + openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); /* we let openpic interrupts starting from an offset, to * leave space for cascading interrupts underneath. diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c index bc95836e417..9455bb6b45e 100644 --- a/arch/ppc/platforms/85xx/stx_gp3.c +++ b/arch/ppc/platforms/85xx/stx_gp3.c @@ -46,7 +46,6 @@ #include <asm/time.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/prom.h> #include <asm/open_pic.h> #include <asm/bootinfo.h> #include <asm/pci-bridge.h> @@ -72,38 +71,7 @@ unsigned long pci_dram_offset = 0; /* Internal interrupts are all Level Sensitive, and Positive Polarity */ static u8 gp3_openpic_initsenses[] __initdata = { - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: L2 Cache */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: ECM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCI/PCI-X */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: RIO Inbound Port Write Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: RIO Doorbell Inbound */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: RIO Outbound Message */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: RIO Inbound Message */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 0 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 0 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 0 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 1 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 1 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 1 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Fast Ethernet */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: CPM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */ + MPC85XX_INTERNAL_IRQ_SENSES, 0x0, /* External 0: */ #if defined(CONFIG_PCI) (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI slot 0 */ @@ -200,7 +168,6 @@ static struct irqaction cpm2_irqaction = { static void __init gp3_init_IRQ(void) { - int i; bd_t *binfo = (bd_t *) __res; /* @@ -218,7 +185,7 @@ gp3_init_IRQ(void) openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); /* Map PIC IRQs 0-11 */ - openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000); + openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); /* * Let openpic interrupts starting from an offset, to diff --git a/arch/ppc/platforms/pmac_cpufreq.c b/arch/ppc/platforms/pmac_cpufreq.c index f7fb2786cd5..5fdd4f607a4 100644 --- a/arch/ppc/platforms/pmac_cpufreq.c +++ b/arch/ppc/platforms/pmac_cpufreq.c @@ -83,16 +83,13 @@ static u32 frequency_gpio; static u32 slew_done_gpio; static int no_schedule; static int has_cpu_l2lve; - - -#define PMAC_CPU_LOW_SPEED 1 -#define PMAC_CPU_HIGH_SPEED 0 +static int is_pmu_based; /* There are only two frequency states for each processor. Values * are in kHz for the time being. */ -#define CPUFREQ_HIGH PMAC_CPU_HIGH_SPEED -#define CPUFREQ_LOW PMAC_CPU_LOW_SPEED +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 static struct cpufreq_frequency_table pmac_cpu_freqs[] = { {CPUFREQ_HIGH, 0}, @@ -100,6 +97,11 @@ static struct cpufreq_frequency_table pmac_cpu_freqs[] = { {0, CPUFREQ_TABLE_END}, }; +static struct freq_attr* pmac_cpu_freqs_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + static inline void local_delay(unsigned long ms) { if (no_schedule) @@ -269,6 +271,8 @@ static int __pmac pmu_set_cpu_speed(int low_speed) #ifdef DEBUG_FREQ printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); #endif + pmu_suspend(); + /* Disable all interrupt sources on openpic */ pic_prio = openpic_get_priority(); openpic_set_priority(0xf); @@ -343,6 +347,8 @@ static int __pmac pmu_set_cpu_speed(int low_speed) debug_calc_bogomips(); #endif + pmu_resume(); + preempt_enable(); return 0; @@ -355,7 +361,7 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify) static unsigned long prev_l3cr; freqs.old = cur_freq; - freqs.new = (speed_mode == PMAC_CPU_HIGH_SPEED) ? hi_freq : low_freq; + freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; freqs.cpu = smp_processor_id(); if (freqs.old == freqs.new) @@ -363,7 +369,7 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify) if (notify) cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - if (speed_mode == PMAC_CPU_LOW_SPEED && + if (speed_mode == CPUFREQ_LOW && cpu_has_feature(CPU_FTR_L3CR)) { l3cr = _get_L3CR(); if (l3cr & L3CR_L3E) { @@ -371,8 +377,8 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify) _set_L3CR(0); } } - set_speed_proc(speed_mode == PMAC_CPU_LOW_SPEED); - if (speed_mode == PMAC_CPU_HIGH_SPEED && + set_speed_proc(speed_mode == CPUFREQ_LOW); + if (speed_mode == CPUFREQ_HIGH && cpu_has_feature(CPU_FTR_L3CR)) { l3cr = _get_L3CR(); if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) @@ -380,7 +386,7 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify) } if (notify) cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - cur_freq = (speed_mode == PMAC_CPU_HIGH_SPEED) ? hi_freq : low_freq; + cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; return 0; } @@ -423,7 +429,8 @@ static int __pmac pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; policy->cur = cur_freq; - return cpufreq_frequency_table_cpuinfo(policy, &pmac_cpu_freqs[0]); + cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu); + return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs); } static u32 __pmac read_gpio(struct device_node *np) @@ -456,8 +463,8 @@ static int __pmac pmac_cpufreq_suspend(struct cpufreq_policy *policy, u32 state) */ no_schedule = 1; sleep_freq = cur_freq; - if (cur_freq == low_freq) - do_set_cpu_speed(PMAC_CPU_HIGH_SPEED, 0); + if (cur_freq == low_freq && !is_pmu_based) + do_set_cpu_speed(CPUFREQ_HIGH, 0); return 0; } @@ -473,8 +480,8 @@ static int __pmac pmac_cpufreq_resume(struct cpufreq_policy *policy) * is that we force a switch to whatever it was, which is * probably high speed due to our suspend() routine */ - do_set_cpu_speed(sleep_freq == low_freq ? PMAC_CPU_LOW_SPEED - : PMAC_CPU_HIGH_SPEED, 0); + do_set_cpu_speed(sleep_freq == low_freq ? + CPUFREQ_LOW : CPUFREQ_HIGH, 0); no_schedule = 0; return 0; @@ -488,6 +495,7 @@ static struct cpufreq_driver pmac_cpufreq_driver = { .suspend = pmac_cpufreq_suspend, .resume = pmac_cpufreq_resume, .flags = CPUFREQ_PM_NO_WARN, + .attr = pmac_cpu_freqs_attr, .name = "powermac", .owner = THIS_MODULE, }; @@ -580,6 +588,7 @@ static int __pmac pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) return 1; hi_freq = (*value) / 1000; set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; return 0; } @@ -684,6 +693,7 @@ static int __init pmac_cpufreq_setup(void) hi_freq = cur_freq; low_freq = 400000; set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; } /* Else check for TiPb 400 & 500 */ else if (machine_is_compatible("PowerBook3,2")) { @@ -695,6 +705,7 @@ static int __init pmac_cpufreq_setup(void) hi_freq = cur_freq; low_freq = 300000; set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; } /* Else check for 750FX */ else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) diff --git a/arch/ppc/platforms/pq2ads.h b/arch/ppc/platforms/pq2ads.h index cf5e5dd06d6..067d9a5aebc 100644 --- a/arch/ppc/platforms/pq2ads.h +++ b/arch/ppc/platforms/pq2ads.h @@ -49,10 +49,10 @@ /* PCI interrupt controller */ #define PCI_INT_STAT_REG 0xF8200000 #define PCI_INT_MASK_REG 0xF8200004 -#define PIRQA (NR_SIU_INTS + 0) -#define PIRQB (NR_SIU_INTS + 1) -#define PIRQC (NR_SIU_INTS + 2) -#define PIRQD (NR_SIU_INTS + 3) +#define PIRQA (NR_CPM_INTS + 0) +#define PIRQB (NR_CPM_INTS + 1) +#define PIRQC (NR_CPM_INTS + 2) +#define PIRQD (NR_CPM_INTS + 3) /* * PCI memory map definitions for MPC8266ADS-PCI. @@ -68,28 +68,23 @@ * 0x00000000-0x1FFFFFFF 0x00000000-0x1FFFFFFF MPC8266 local memory */ -/* window for a PCI master to access MPC8266 memory */ -#define PCI_SLV_MEM_LOCAL 0x00000000 /* Local base */ -#define PCI_SLV_MEM_BUS 0x00000000 /* PCI base */ +/* All the other PCI memory map definitions reside at syslib/m82xx_pci.h + Here we should redefine what is unique for this board */ +#define M82xx_PCI_SLAVE_MEM_LOCAL 0x00000000 /* Local base */ +#define M82xx_PCI_SLAVE_MEM_BUS 0x00000000 /* PCI base */ +#define M82xx_PCI_SLAVE_MEM_SIZE 0x10000000 /* 256 Mb */ -/* window for the processor to access PCI memory with prefetching */ -#define PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */ -#define PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */ -#define PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */ +#define M82xx_PCI_SLAVE_SEC_WND_SIZE ~(0x40000000 - 1U) /* 2 x 512Mb */ +#define M82xx_PCI_SLAVE_SEC_WND_BASE 0x80000000 /* PCI Memory base */ -/* window for the processor to access PCI memory without prefetching */ -#define PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */ -#define PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */ -#define PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */ +#if defined(CONFIG_ADS8272) +#define PCI_INT_TO_SIU SIU_INT_IRQ2 +#elif defined(CONFIG_PQ2FADS) +#define PCI_INT_TO_SIU SIU_INT_IRQ6 +#else +#warning PCI Bridge will be without interrupts support +#endif -/* window for the processor to access PCI I/O */ -#define PCI_MSTR_IO_LOCAL 0xF4000000 /* Local base */ -#define PCI_MSTR_IO_BUS 0x00000000 /* PCI base */ -#define PCI_MSTR_IO_SIZE 0x04000000 /* 64MB */ - -#define _IO_BASE PCI_MSTR_IO_LOCAL -#define _ISA_MEM_BASE PCI_MSTR_MEMIO_LOCAL -#define PCI_DRAM_OFFSET PCI_SLV_MEM_BUS #endif /* CONFIG_PCI */ #endif /* __MACH_ADS8260_DEFS */ diff --git a/arch/ppc/platforms/sandpoint.c b/arch/ppc/platforms/sandpoint.c index 531bfa0e451..70e58f43f2b 100644 --- a/arch/ppc/platforms/sandpoint.c +++ b/arch/ppc/platforms/sandpoint.c @@ -81,6 +81,7 @@ #include <linux/serial.h> #include <linux/tty.h> /* for linux/serial_core.h */ #include <linux/serial_core.h> +#include <linux/serial_8250.h> #include <asm/system.h> #include <asm/pgtable.h> @@ -99,6 +100,7 @@ #include <asm/mpc10x.h> #include <asm/pci-bridge.h> #include <asm/kgdb.h> +#include <asm/ppc_sys.h> #include "sandpoint.h" @@ -305,6 +307,24 @@ sandpoint_setup_arch(void) /* Lookup PCI host bridges */ sandpoint_find_bridges(); + if (strncmp (cur_ppc_sys_spec->ppc_sys_name, "8245", 4) == 0) + { + bd_t *bp = (bd_t *)__res; + struct plat_serial8250_port *pdata; + pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC10X_DUART); + + if (pdata) + { + pdata[0].uartclk = bp->bi_busfreq; + pdata[0].membase = ioremap(pdata[0].mapbase, 0x100); + + /* this disables the 2nd serial port on the DUART + * since the sandpoint does not have it connected */ + pdata[1].uartclk = 0; + pdata[1].irq = 0; + pdata[1].mapbase = 0; + } + printk(KERN_INFO "Motorola SPS Sandpoint Test Platform\n"); printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n"); diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index dd418ea3426..dec5bf4f687 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -81,7 +81,7 @@ obj-$(CONFIG_SBC82xx) += todc_time.o obj-$(CONFIG_SPRUCE) += cpc700_pic.o indirect_pci.o pci_auto.o \ todc_time.o obj-$(CONFIG_8260) += m8260_setup.o -obj-$(CONFIG_PCI_8260) += m8260_pci.o indirect_pci.o +obj-$(CONFIG_PCI_8260) += m82xx_pci.o indirect_pci.o pci_auto.o obj-$(CONFIG_8260_PCI9) += m8260_pci_erratum9.o obj-$(CONFIG_CPM2) += cpm2_common.o cpm2_pic.o ifeq ($(CONFIG_PPC_GEN550),y) @@ -92,12 +92,12 @@ ifeq ($(CONFIG_SERIAL_MPSC_CONSOLE),y) obj-$(CONFIG_SERIAL_TEXT_DEBUG) += mv64x60_dbg.o endif obj-$(CONFIG_BOOTX_TEXT) += btext.o -obj-$(CONFIG_MPC10X_BRIDGE) += mpc10x_common.o indirect_pci.o +obj-$(CONFIG_MPC10X_BRIDGE) += mpc10x_common.o indirect_pci.o ppc_sys.o obj-$(CONFIG_MPC10X_OPENPIC) += open_pic.o obj-$(CONFIG_40x) += dcr.o obj-$(CONFIG_BOOKE) += dcr.o obj-$(CONFIG_85xx) += open_pic.o ppc85xx_common.o ppc85xx_setup.o \ - ppc_sys.o mpc85xx_sys.o \ + ppc_sys.o i8259.o mpc85xx_sys.o \ mpc85xx_devices.o ifeq ($(CONFIG_85xx),y) obj-$(CONFIG_PCI) += indirect_pci.o pci_auto.o @@ -107,6 +107,7 @@ obj-$(CONFIG_83xx) += ipic.o ppc83xx_setup.o ppc_sys.o \ ifeq ($(CONFIG_83xx),y) obj-$(CONFIG_PCI) += indirect_pci.o pci_auto.o endif +obj-$(CONFIG_MPC8548_CDS) += todc_time.o obj-$(CONFIG_MPC8555_CDS) += todc_time.o obj-$(CONFIG_PPC_MPC52xx) += mpc52xx_setup.o mpc52xx_pic.o \ mpc52xx_sys.o mpc52xx_devices.o ppc_sys.o diff --git a/arch/ppc/syslib/ipic.c b/arch/ppc/syslib/ipic.c index acb2cde3171..580ed658e87 100644 --- a/arch/ppc/syslib/ipic.c +++ b/arch/ppc/syslib/ipic.c @@ -479,7 +479,7 @@ void __init ipic_init(phys_addr_t phys_addr, temp = 0; for (i = 0 ; i < senses_count ; i++) { if ((senses[i] & IRQ_SENSE_MASK) == IRQ_SENSE_EDGE) { - temp |= 1 << (16 - i); + temp |= 1 << (15 - i); if (i != 0) irq_desc[i + irq_offset + MPC83xx_IRQ_EXT1 - 1].status = 0; else diff --git a/arch/ppc/syslib/m8260_pci.c b/arch/ppc/syslib/m8260_pci.c deleted file mode 100644 index 057cc3f8ff3..00000000000 --- a/arch/ppc/syslib/m8260_pci.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004 Red Hat, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/delay.h> - -#include <asm/byteorder.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/machdep.h> -#include <asm/pci-bridge.h> -#include <asm/immap_cpm2.h> -#include <asm/mpc8260.h> - -#include "m8260_pci.h" - - -/* PCI bus configuration registers. - */ - -static void __init m8260_setup_pci(struct pci_controller *hose) -{ - volatile cpm2_map_t *immap = cpm2_immr; - unsigned long pocmr; - u16 tempShort; - -#ifndef CONFIG_ATC /* already done in U-Boot */ - /* - * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), - * and local bus for PCI (SIUMCR [LBPC]). - */ - immap->im_siu_conf.siu_82xx.sc_siumcr = 0x00640000; -#endif - - /* Make PCI lowest priority */ - /* Each 4 bits is a device bus request and the MS 4bits - is highest priority */ - /* Bus 4bit value - --- ---------- - CPM high 0b0000 - CPM middle 0b0001 - CPM low 0b0010 - PCI reguest 0b0011 - Reserved 0b0100 - Reserved 0b0101 - Internal Core 0b0110 - External Master 1 0b0111 - External Master 2 0b1000 - External Master 3 0b1001 - The rest are reserved */ - immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893; - - /* Park bus on core while modifying PCI Bus accesses */ - immap->im_siu_conf.siu_82xx.sc_ppc_acr = 0x6; - - /* - * Set up master window that allows the CPU to access PCI space. This - * window is set up using the first SIU PCIBR registers. - */ - immap->im_memctl.memc_pcimsk0 = MPC826x_PCI_MASK; - immap->im_memctl.memc_pcibr0 = MPC826x_PCI_BASE | PCIBR_ENABLE; - - /* Disable machine check on no response or target abort */ - immap->im_pci.pci_emr = cpu_to_le32(0x1fe7); - /* Release PCI RST (by default the PCI RST signal is held low) */ - immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN); - - /* give it some time */ - mdelay(1); - - /* - * Set up master window that allows the CPU to access PCI Memory (prefetch) - * space. This window is set up using the first set of Outbound ATU registers. - */ - immap->im_pci.pci_potar0 = cpu_to_le32(MPC826x_PCI_LOWER_MEM >> 12); - immap->im_pci.pci_pobar0 = cpu_to_le32((MPC826x_PCI_LOWER_MEM - MPC826x_PCI_MEM_OFFSET) >> 12); - pocmr = ((MPC826x_PCI_UPPER_MEM - MPC826x_PCI_LOWER_MEM) >> 12) ^ 0xfffff; - immap->im_pci.pci_pocmr0 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PREFETCH_EN); - - /* - * Set up master window that allows the CPU to access PCI Memory (non-prefetch) - * space. This window is set up using the second set of Outbound ATU registers. - */ - immap->im_pci.pci_potar1 = cpu_to_le32(MPC826x_PCI_LOWER_MMIO >> 12); - immap->im_pci.pci_pobar1 = cpu_to_le32((MPC826x_PCI_LOWER_MMIO - MPC826x_PCI_MMIO_OFFSET) >> 12); - pocmr = ((MPC826x_PCI_UPPER_MMIO - MPC826x_PCI_LOWER_MMIO) >> 12) ^ 0xfffff; - immap->im_pci.pci_pocmr1 = cpu_to_le32(pocmr | POCMR_ENABLE); - - /* - * Set up master window that allows the CPU to access PCI IO space. This window - * is set up using the third set of Outbound ATU registers. - */ - immap->im_pci.pci_potar2 = cpu_to_le32(MPC826x_PCI_IO_BASE >> 12); - immap->im_pci.pci_pobar2 = cpu_to_le32(MPC826x_PCI_LOWER_IO >> 12); - pocmr = ((MPC826x_PCI_UPPER_IO - MPC826x_PCI_LOWER_IO) >> 12) ^ 0xfffff; - immap->im_pci.pci_pocmr2 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PCI_IO); - - /* - * Set up slave window that allows PCI masters to access MPC826x local memory. - * This window is set up using the first set of Inbound ATU registers - */ - - immap->im_pci.pci_pitar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_LOCAL >> 12); - immap->im_pci.pci_pibar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_BUS >> 12); - pocmr = ((MPC826x_PCI_SLAVE_MEM_SIZE-1) >> 12) ^ 0xfffff; - immap->im_pci.pci_picmr0 = cpu_to_le32(pocmr | PICMR_ENABLE | PICMR_PREFETCH_EN); - - /* See above for description - puts PCI request as highest priority */ - immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567; - - /* Park the bus on the PCI */ - immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI; - - /* Host mode - specify the bridge as a host-PCI bridge */ - early_write_config_word(hose, 0, 0, PCI_CLASS_DEVICE, PCI_CLASS_BRIDGE_HOST); - - /* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */ - early_read_config_word(hose, 0, 0, PCI_COMMAND, &tempShort); - early_write_config_word(hose, 0, 0, PCI_COMMAND, - tempShort | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); -} - -void __init m8260_find_bridges(void) -{ - extern int pci_assign_all_busses; - struct pci_controller * hose; - - pci_assign_all_busses = 1; - - hose = pcibios_alloc_controller(); - - if (!hose) - return; - - ppc_md.pci_swizzle = common_swizzle; - - hose->first_busno = 0; - hose->bus_offset = 0; - hose->last_busno = 0xff; - - setup_m8260_indirect_pci(hose, - (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr, - (unsigned long)&cpm2_immr->im_pci.pci_cfg_data); - - m8260_setup_pci(hose); - hose->pci_mem_offset = MPC826x_PCI_MEM_OFFSET; - - hose->io_base_virt = ioremap(MPC826x_PCI_IO_BASE, - MPC826x_PCI_IO_SIZE); - isa_io_base = (unsigned long) hose->io_base_virt; - - /* setup resources */ - pci_init_resource(&hose->mem_resources[0], - MPC826x_PCI_LOWER_MEM, - MPC826x_PCI_UPPER_MEM, - IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory"); - - pci_init_resource(&hose->mem_resources[1], - MPC826x_PCI_LOWER_MMIO, - MPC826x_PCI_UPPER_MMIO, - IORESOURCE_MEM, "PCI memory"); - - pci_init_resource(&hose->io_resource, - MPC826x_PCI_LOWER_IO, - MPC826x_PCI_UPPER_IO, - IORESOURCE_IO, "PCI I/O"); -} diff --git a/arch/ppc/syslib/m8260_pci.h b/arch/ppc/syslib/m8260_pci.h deleted file mode 100644 index d1352120acd..00000000000 --- a/arch/ppc/syslib/m8260_pci.h +++ /dev/null @@ -1,76 +0,0 @@ - -#ifndef _PPC_KERNEL_M8260_PCI_H -#define _PPC_KERNEL_M8260_PCI_H - -#include <asm/m8260_pci.h> - -/* - * Local->PCI map (from CPU) controlled by - * MPC826x master window - * - * 0x80000000 - 0xBFFFFFFF Total CPU2PCI space PCIBR0 - * - * 0x80000000 - 0x9FFFFFFF PCI Mem with prefetch (Outbound ATU #1) - * 0xA0000000 - 0xAFFFFFFF PCI Mem w/o prefetch (Outbound ATU #2) - * 0xB0000000 - 0xB0FFFFFF 32-bit PCI IO (Outbound ATU #3) - * - * PCI->Local map (from PCI) - * MPC826x slave window controlled by - * - * 0x00000000 - 0x07FFFFFF MPC826x local memory (Inbound ATU #1) - */ - -/* - * Slave window that allows PCI masters to access MPC826x local memory. - * This window is set up using the first set of Inbound ATU registers - */ - -#ifndef MPC826x_PCI_SLAVE_MEM_LOCAL -#define MPC826x_PCI_SLAVE_MEM_LOCAL (((struct bd_info *)__res)->bi_memstart) -#define MPC826x_PCI_SLAVE_MEM_BUS (((struct bd_info *)__res)->bi_memstart) -#define MPC826x_PCI_SLAVE_MEM_SIZE (((struct bd_info *)__res)->bi_memsize) -#endif - -/* - * This is the window that allows the CPU to access PCI address space. - * It will be setup with the SIU PCIBR0 register. All three PCI master - * windows, which allow the CPU to access PCI prefetch, non prefetch, - * and IO space (see below), must all fit within this window. - */ -#ifndef MPC826x_PCI_BASE -#define MPC826x_PCI_BASE 0x80000000 -#define MPC826x_PCI_MASK 0xc0000000 -#endif - -#ifndef MPC826x_PCI_LOWER_MEM -#define MPC826x_PCI_LOWER_MEM 0x80000000 -#define MPC826x_PCI_UPPER_MEM 0x9fffffff -#define MPC826x_PCI_MEM_OFFSET 0x00000000 -#endif - -#ifndef MPC826x_PCI_LOWER_MMIO -#define MPC826x_PCI_LOWER_MMIO 0xa0000000 -#define MPC826x_PCI_UPPER_MMIO 0xafffffff -#define MPC826x_PCI_MMIO_OFFSET 0x00000000 -#endif - -#ifndef MPC826x_PCI_LOWER_IO -#define MPC826x_PCI_LOWER_IO 0x00000000 -#define MPC826x_PCI_UPPER_IO 0x00ffffff -#define MPC826x_PCI_IO_BASE 0xb0000000 -#define MPC826x_PCI_IO_SIZE 0x01000000 -#endif - -#ifndef _IO_BASE -#define _IO_BASE isa_io_base -#endif - -#ifdef CONFIG_8260_PCI9 -struct pci_controller; -extern void setup_m8260_indirect_pci(struct pci_controller* hose, - u32 cfg_addr, u32 cfg_data); -#else -#define setup_m8260_indirect_pci setup_indirect_pci -#endif - -#endif /* _PPC_KERNEL_M8260_PCI_H */ diff --git a/arch/ppc/syslib/m8260_pci_erratum9.c b/arch/ppc/syslib/m8260_pci_erratum9.c index 9c0582d639e..1dc7e4e1d49 100644 --- a/arch/ppc/syslib/m8260_pci_erratum9.c +++ b/arch/ppc/syslib/m8260_pci_erratum9.c @@ -31,7 +31,7 @@ #include <asm/immap_cpm2.h> #include <asm/cpm2.h> -#include "m8260_pci.h" +#include "m82xx_pci.h" #ifdef CONFIG_8260_PCI9 /*#include <asm/mpc8260_pci9.h>*/ /* included in asm/io.h */ @@ -248,11 +248,11 @@ EXPORT_SYMBOL(idma_pci9_read_le); static inline int is_pci_mem(unsigned long addr) { - if (addr >= MPC826x_PCI_LOWER_MMIO && - addr <= MPC826x_PCI_UPPER_MMIO) + if (addr >= M82xx_PCI_LOWER_MMIO && + addr <= M82xx_PCI_UPPER_MMIO) return 1; - if (addr >= MPC826x_PCI_LOWER_MEM && - addr <= MPC826x_PCI_UPPER_MEM) + if (addr >= M82xx_PCI_LOWER_MEM && + addr <= M82xx_PCI_UPPER_MEM) return 1; return 0; } diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c index 23ea3f694de..fda75d79050 100644 --- a/arch/ppc/syslib/m8260_setup.c +++ b/arch/ppc/syslib/m8260_setup.c @@ -34,7 +34,8 @@ unsigned char __res[sizeof(bd_t)]; extern void cpm2_reset(void); -extern void m8260_find_bridges(void); +extern void pq2_find_bridges(void); +extern void pq2pci_init_irq(void); extern void idma_pci9_init(void); /* Place-holder for board-specific init */ @@ -56,7 +57,7 @@ m8260_setup_arch(void) idma_pci9_init(); #endif #ifdef CONFIG_PCI_8260 - m8260_find_bridges(); + pq2_find_bridges(); #endif #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) @@ -173,6 +174,12 @@ m8260_init_IRQ(void) * in case the boot rom changed something on us. */ cpm2_immr->im_intctl.ic_siprr = 0x05309770; + +#if defined(CONFIG_PCI) && (defined(CONFIG_ADS8272) || defined(CONFIG_PQ2FADS)) + /* Initialize stuff for the 82xx CPLD IC and install demux */ + pq2pci_init_irq(); +#endif + } /* diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c new file mode 100644 index 00000000000..5e7a7edcea7 --- /dev/null +++ b/arch/ppc/syslib/m82xx_pci.c @@ -0,0 +1,383 @@ +/* + * + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 Red Hat, Inc. + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/interrupt.h> + +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/uaccess.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/immap_cpm2.h> +#include <asm/mpc8260.h> +#include <asm/cpm2.h> + +#include "m82xx_pci.h" + +/* + * Interrupt routing + */ + +static inline int +pq2pci_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { PIRQA, PIRQB, PIRQC, PIRQD }, /* IDSEL 22 - PCI slot 0 */ + { PIRQD, PIRQA, PIRQB, PIRQC }, /* IDSEL 23 - PCI slot 1 */ + { PIRQC, PIRQD, PIRQA, PIRQB }, /* IDSEL 24 - PCI slot 2 */ + }; + + const long min_idsel = 22, max_idsel = 24, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +static void +pq2pci_mask_irq(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit)); + return; +} + +static void +pq2pci_unmask_irq(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit)); + return; +} + +static void +pq2pci_mask_and_ack(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit)); + return; +} + +static void +pq2pci_end_irq(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit)); + return; +} + +struct hw_interrupt_type pq2pci_ic = { + "PQ2 PCI", + NULL, + NULL, + pq2pci_unmask_irq, + pq2pci_mask_irq, + pq2pci_mask_and_ack, + pq2pci_end_irq, + 0 +}; + +static irqreturn_t +pq2pci_irq_demux(int irq, void *dev_id, struct pt_regs *regs) +{ + unsigned long stat, mask, pend; + int bit; + + for(;;) { + stat = *(volatile unsigned long *) PCI_INT_STAT_REG; + mask = *(volatile unsigned long *) PCI_INT_MASK_REG; + pend = stat & ~mask & 0xf0000000; + if (!pend) + break; + for (bit = 0; pend != 0; ++bit, pend <<= 1) { + if (pend & 0x80000000) + __do_IRQ(NR_CPM_INTS + bit, regs); + } + } + + return IRQ_HANDLED; +} + +static struct irqaction pq2pci_irqaction = { + .handler = pq2pci_irq_demux, + .flags = SA_INTERRUPT, + .mask = CPU_MASK_NONE, + .name = "PQ2 PCI cascade", +}; + + +void +pq2pci_init_irq(void) +{ + int irq; + volatile cpm2_map_t *immap = cpm2_immr; +#if defined CONFIG_ADS8272 + /* configure chip select for PCI interrupt controller */ + immap->im_memctl.memc_br3 = PCI_INT_STAT_REG | 0x00001801; + immap->im_memctl.memc_or3 = 0xffff8010; +#elif defined CONFIG_PQ2FADS + immap->im_memctl.memc_br8 = PCI_INT_STAT_REG | 0x00001801; + immap->im_memctl.memc_or8 = 0xffff8010; +#endif + for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++) + irq_desc[irq].handler = &pq2pci_ic; + + /* make PCI IRQ level sensitive */ + immap->im_intctl.ic_siexr &= + ~(1 << (14 - (PCI_INT_TO_SIU - SIU_INT_IRQ1))); + + /* mask all PCI interrupts */ + *(volatile unsigned long *) PCI_INT_MASK_REG |= 0xfff00000; + + /* install the demultiplexer for the PCI cascade interrupt */ + setup_irq(PCI_INT_TO_SIU, &pq2pci_irqaction); + return; +} + +static int +pq2pci_exclude_device(u_char bus, u_char devfn) +{ + return PCIBIOS_SUCCESSFUL; +} + +/* PCI bus configuration registers. + */ +static void +pq2ads_setup_pci(struct pci_controller *hose) +{ + __u32 val; + volatile cpm2_map_t *immap = cpm2_immr; + bd_t* binfo = (bd_t*) __res; + u32 sccr = immap->im_clkrst.car_sccr; + uint pci_div,freq,time; + /* PCI int lowest prio */ + /* Each 4 bits is a device bus request and the MS 4bits + is highest priority */ + /* Bus 4bit value + --- ---------- + CPM high 0b0000 + CPM middle 0b0001 + CPM low 0b0010 + PCI reguest 0b0011 + Reserved 0b0100 + Reserved 0b0101 + Internal Core 0b0110 + External Master 1 0b0111 + External Master 2 0b1000 + External Master 3 0b1001 + The rest are reserved + */ + immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893; + /* park bus on core */ + immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_CORE; + /* + * Set up master windows that allow the CPU to access PCI space. These + * windows are set up using the two SIU PCIBR registers. + */ + + immap->im_memctl.memc_pcimsk0 = M82xx_PCI_PRIM_WND_SIZE; + immap->im_memctl.memc_pcibr0 = M82xx_PCI_PRIM_WND_BASE | PCIBR_ENABLE; + +#ifdef M82xx_PCI_SEC_WND_SIZE + immap->im_memctl.memc_pcimsk1 = M82xx_PCI_SEC_WND_SIZE; + immap->im_memctl.memc_pcibr1 = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE; +#endif + +#if defined CONFIG_ADS8272 + immap->im_siu_conf.siu_82xx.sc_siumcr = + (immap->im_siu_conf.siu_82xx.sc_siumcr & + ~(SIUMCR_BBD | SIUMCR_ESE | SIUMCR_PBSE | + SIUMCR_CDIS | SIUMCR_DPPC11 | SIUMCR_L2CPC11 | + SIUMCR_LBPC11 | SIUMCR_APPC11 | + SIUMCR_CS10PC11 | SIUMCR_BCTLC11 | SIUMCR_MMR11)) | + SIUMCR_DPPC11 | SIUMCR_L2CPC01 | SIUMCR_LBPC00 | + SIUMCR_APPC10 | SIUMCR_CS10PC00 | + SIUMCR_BCTLC00 | SIUMCR_MMR11 ; + +#elif defined CONFIG_PQ2FADS + /* + * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), + * and local bus for PCI (SIUMCR [LBPC]). + */ + immap->im_siu_conf.siu_82xx.sc_siumcr = (immap->im_siu_conf.sc_siumcr & + ~(SIUMCR_L2PC11 | SIUMCR_LBPC11 | SIUMCR_CS10PC11 | SIUMCR_APPC11) | + SIUMCR_BBD | SIUMCR_LBPC01 | SIUMCR_DPPC11 | SIUMCR_APPC10; +#endif + /* Enable PCI */ + immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN); + + pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) * + ( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1); + freq = (uint)((2*binfo->bi_cpmfreq)/(pci_div)); + time = (int)666666/freq; + /* due to PCI Local Bus spec, some devices needs to wait such a long + time after RST deassertion. More specifically, 0.508s for 66MHz & twice more for 33 */ + printk("%s: The PCI bus is %d Mhz.\nWaiting %s after deasserting RST...\n",__FILE__,freq, + (time==1) ? "0.5 seconds":"1 second" ); + + { + int i; + for(i=0;i<(500*time);i++) + udelay(1000); + } + + /* setup ATU registers */ + immap->im_pci.pci_pocmr0 = cpu_to_le32(POCMR_ENABLE | POCMR_PCI_IO | + ((~(M82xx_PCI_IO_SIZE - 1U)) >> POTA_ADDR_SHIFT)); + immap->im_pci.pci_potar0 = cpu_to_le32(M82xx_PCI_LOWER_IO >> POTA_ADDR_SHIFT); + immap->im_pci.pci_pobar0 = cpu_to_le32(M82xx_PCI_IO_BASE >> POTA_ADDR_SHIFT); + + /* Set-up non-prefetchable window */ + immap->im_pci.pci_pocmr1 = cpu_to_le32(POCMR_ENABLE | ((~(M82xx_PCI_MMIO_SIZE-1U)) >> POTA_ADDR_SHIFT)); + immap->im_pci.pci_potar1 = cpu_to_le32(M82xx_PCI_LOWER_MMIO >> POTA_ADDR_SHIFT); + immap->im_pci.pci_pobar1 = cpu_to_le32((M82xx_PCI_LOWER_MMIO - M82xx_PCI_MMIO_OFFSET) >> POTA_ADDR_SHIFT); + + /* Set-up prefetchable window */ + immap->im_pci.pci_pocmr2 = cpu_to_le32(POCMR_ENABLE |POCMR_PREFETCH_EN | + (~(M82xx_PCI_MEM_SIZE-1U) >> POTA_ADDR_SHIFT)); + immap->im_pci.pci_potar2 = cpu_to_le32(M82xx_PCI_LOWER_MEM >> POTA_ADDR_SHIFT); + immap->im_pci.pci_pobar2 = cpu_to_le32((M82xx_PCI_LOWER_MEM - M82xx_PCI_MEM_OFFSET) >> POTA_ADDR_SHIFT); + + /* Inbound transactions from PCI memory space */ + immap->im_pci.pci_picmr0 = cpu_to_le32(PICMR_ENABLE | PICMR_PREFETCH_EN | + ((~(M82xx_PCI_SLAVE_MEM_SIZE-1U)) >> PITA_ADDR_SHIFT)); + immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS >> PITA_ADDR_SHIFT); + immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT); + +#if defined CONFIG_ADS8272 + /* PCI int highest prio */ + immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x01236745; +#elif defined CONFIG_PQ2FADS + immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567; +#endif + /* park bus on PCI */ + immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI; + + /* Enable bus mastering and inbound memory transactions */ + early_read_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, &val); + val &= 0xffff0000; + val |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER; + early_write_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, val); + +} + +void __init pq2_find_bridges(void) +{ + extern int pci_assign_all_busses; + struct pci_controller * hose; + int host_bridge; + + pci_assign_all_busses = 1; + + hose = pcibios_alloc_controller(); + + if (!hose) + return; + + ppc_md.pci_swizzle = common_swizzle; + + hose->first_busno = 0; + hose->bus_offset = 0; + hose->last_busno = 0xff; + +#ifdef CONFIG_ADS8272 + hose->set_cfg_type = 1; +#endif + + setup_m8260_indirect_pci(hose, + (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr, + (unsigned long)&cpm2_immr->im_pci.pci_cfg_data); + + /* Make sure it is a supported bridge */ + early_read_config_dword(hose, + 0, + PCI_DEVFN(0,0), + PCI_VENDOR_ID, + &host_bridge); + switch (host_bridge) { + case PCI_DEVICE_ID_MPC8265: + break; + case PCI_DEVICE_ID_MPC8272: + break; + default: + printk("Attempting to use unrecognized host bridge ID" + " 0x%08x.\n", host_bridge); + break; + } + + pq2ads_setup_pci(hose); + + hose->io_space.start = M82xx_PCI_LOWER_IO; + hose->io_space.end = M82xx_PCI_UPPER_IO; + hose->mem_space.start = M82xx_PCI_LOWER_MEM; + hose->mem_space.end = M82xx_PCI_UPPER_MMIO; + hose->pci_mem_offset = M82xx_PCI_MEM_OFFSET; + + isa_io_base = + (unsigned long) ioremap(M82xx_PCI_IO_BASE, + M82xx_PCI_IO_SIZE); + hose->io_base_virt = (void *) isa_io_base; + + /* setup resources */ + pci_init_resource(&hose->mem_resources[0], + M82xx_PCI_LOWER_MEM, + M82xx_PCI_UPPER_MEM, + IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory"); + + pci_init_resource(&hose->mem_resources[1], + M82xx_PCI_LOWER_MMIO, + M82xx_PCI_UPPER_MMIO, + IORESOURCE_MEM, "PCI memory"); + + pci_init_resource(&hose->io_resource, + M82xx_PCI_LOWER_IO, + M82xx_PCI_UPPER_IO, + IORESOURCE_IO | 1, "PCI I/O"); + + ppc_md.pci_exclude_device = pq2pci_exclude_device; + hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); + + ppc_md.pci_map_irq = pq2pci_map_irq; + ppc_md.pcibios_fixup = NULL; + ppc_md.pcibios_fixup_bus = NULL; + +} diff --git a/arch/ppc/syslib/m82xx_pci.h b/arch/ppc/syslib/m82xx_pci.h new file mode 100644 index 00000000000..924f73f8e59 --- /dev/null +++ b/arch/ppc/syslib/m82xx_pci.h @@ -0,0 +1,92 @@ + +#ifndef _PPC_KERNEL_M82XX_PCI_H +#define _PPC_KERNEL_M82XX_PCI_H + +#include <asm/m8260_pci.h> +/* + * Local->PCI map (from CPU) controlled by + * MPC826x master window + * + * 0xF6000000 - 0xF7FFFFFF IO space + * 0x80000000 - 0xBFFFFFFF CPU2PCI memory space PCIBR0 + * + * 0x80000000 - 0x9FFFFFFF PCI Mem with prefetch (Outbound ATU #1) + * 0xA0000000 - 0xBFFFFFFF PCI Mem w/o prefetch (Outbound ATU #2) + * 0xF6000000 - 0xF7FFFFFF 32-bit PCI IO (Outbound ATU #3) + * + * PCI->Local map (from PCI) + * MPC826x slave window controlled by + * + * 0x00000000 - 0x07FFFFFF MPC826x local memory (Inbound ATU #1) + */ + +/* + * Slave window that allows PCI masters to access MPC826x local memory. + * This window is set up using the first set of Inbound ATU registers + */ + +#ifndef M82xx_PCI_SLAVE_MEM_LOCAL +#define M82xx_PCI_SLAVE_MEM_LOCAL (((struct bd_info *)__res)->bi_memstart) +#define M82xx_PCI_SLAVE_MEM_BUS (((struct bd_info *)__res)->bi_memstart) +#define M82xx_PCI_SLAVE_MEM_SIZE (((struct bd_info *)__res)->bi_memsize) +#endif + +/* + * This is the window that allows the CPU to access PCI address space. + * It will be setup with the SIU PCIBR0 register. All three PCI master + * windows, which allow the CPU to access PCI prefetch, non prefetch, + * and IO space (see below), must all fit within this window. + */ + +#ifndef M82xx_PCI_LOWER_MEM +#define M82xx_PCI_LOWER_MEM 0x80000000 +#define M82xx_PCI_UPPER_MEM 0x9fffffff +#define M82xx_PCI_MEM_OFFSET 0x00000000 +#define M82xx_PCI_MEM_SIZE 0x20000000 +#endif + +#ifndef M82xx_PCI_LOWER_MMIO +#define M82xx_PCI_LOWER_MMIO 0xa0000000 +#define M82xx_PCI_UPPER_MMIO 0xafffffff +#define M82xx_PCI_MMIO_OFFSET 0x00000000 +#define M82xx_PCI_MMIO_SIZE 0x20000000 +#endif + +#ifndef M82xx_PCI_LOWER_IO +#define M82xx_PCI_LOWER_IO 0x00000000 +#define M82xx_PCI_UPPER_IO 0x01ffffff +#define M82xx_PCI_IO_BASE 0xf6000000 +#define M82xx_PCI_IO_SIZE 0x02000000 +#endif + +#ifndef M82xx_PCI_PRIM_WND_SIZE +#define M82xx_PCI_PRIM_WND_SIZE ~(M82xx_PCI_IO_SIZE - 1U) +#define M82xx_PCI_PRIM_WND_BASE (M82xx_PCI_IO_BASE) +#endif + +#ifndef M82xx_PCI_SEC_WND_SIZE +#define M82xx_PCI_SEC_WND_SIZE ~(M82xx_PCI_MEM_SIZE + M82xx_PCI_MMIO_SIZE - 1U) +#define M82xx_PCI_SEC_WND_BASE (M82xx_PCI_LOWER_MEM) +#endif + +#ifndef POTA_ADDR_SHIFT +#define POTA_ADDR_SHIFT 12 +#endif + +#ifndef PITA_ADDR_SHIFT +#define PITA_ADDR_SHIFT 12 +#endif + +#ifndef _IO_BASE +#define _IO_BASE isa_io_base +#endif + +#ifdef CONFIG_8260_PCI9 +struct pci_controller; +extern void setup_m8260_indirect_pci(struct pci_controller* hose, + u32 cfg_addr, u32 cfg_data); +#else +#define setup_m8260_indirect_pci setup_indirect_pci +#endif + +#endif /* _PPC_KERNEL_M8260_PCI_H */ diff --git a/arch/ppc/syslib/mpc10x_common.c b/arch/ppc/syslib/mpc10x_common.c index fd93adfd464..8fc5f415452 100644 --- a/arch/ppc/syslib/mpc10x_common.c +++ b/arch/ppc/syslib/mpc10x_common.c @@ -21,6 +21,9 @@ #include <linux/init.h> #include <linux/pci.h> #include <linux/slab.h> +#include <linux/serial_8250.h> +#include <linux/fsl_devices.h> +#include <linux/device.h> #include <asm/byteorder.h> #include <asm/io.h> @@ -30,16 +33,7 @@ #include <asm/pci-bridge.h> #include <asm/open_pic.h> #include <asm/mpc10x.h> -#include <asm/ocp.h> - -/* The OCP structure is fixed by code below, before OCP initialises. - paddr depends on where the board places the EUMB. - - fixed in mpc10x_bridge_init(). - irq depends on two things: - > does the board use the EPIC at all? (PCORE does not). - > is the EPIC in serial or parallel mode? - - fixed in mpc10x_set_openpic(). -*/ +#include <asm/ppc_sys.h> #ifdef CONFIG_MPC10X_OPENPIC #ifdef CONFIG_EPIC_SERIAL_MODE @@ -50,35 +44,140 @@ #define MPC10X_I2C_IRQ (EPIC_IRQ_BASE + NUM_8259_INTERRUPTS) #define MPC10X_DMA0_IRQ (EPIC_IRQ_BASE + 1 + NUM_8259_INTERRUPTS) #define MPC10X_DMA1_IRQ (EPIC_IRQ_BASE + 2 + NUM_8259_INTERRUPTS) +#define MPC10X_UART0_IRQ (EPIC_IRQ_BASE + 4 + NUM_8259_INTERRUPTS) #else -#define MPC10X_I2C_IRQ OCP_IRQ_NA -#define MPC10X_DMA0_IRQ OCP_IRQ_NA -#define MPC10X_DMA1_IRQ OCP_IRQ_NA +#define MPC10X_I2C_IRQ -1 +#define MPC10X_DMA0_IRQ -1 +#define MPC10X_DMA1_IRQ -1 +#define MPC10X_UART0_IRQ -1 #endif - -struct ocp_def core_ocp[] = { - { .vendor = OCP_VENDOR_INVALID - } +static struct fsl_i2c_platform_data mpc10x_i2c_pdata = { + .device_flags = 0, }; -static struct ocp_fs_i2c_data mpc10x_i2c_data = { - .flags = 0 +static struct plat_serial8250_port serial_platform_data[] = { + [0] = { + .mapbase = 0x4500, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + }, + [1] = { + .mapbase = 0x4600, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + }, + { }, }; -static struct ocp_def mpc10x_i2c_ocp = { - .vendor = OCP_VENDOR_MOTOROLA, - .function = OCP_FUNC_IIC, - .index = 0, - .additions = &mpc10x_i2c_data + +struct platform_device ppc_sys_platform_devices[] = { + [MPC10X_IIC1] = { + .name = "fsl-i2c", + .id = 1, + .dev.platform_data = &mpc10x_i2c_pdata, + .num_resources = 2, + .resource = (struct resource[]) { + { + .start = MPC10X_EUMB_I2C_OFFSET, + .end = MPC10X_EUMB_I2C_OFFSET + + MPC10X_EUMB_I2C_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ + }, + }, + }, + [MPC10X_DMA0] = { + .name = "fsl-dma", + .id = 0, + .num_resources = 2, + .resource = (struct resource[]) { + { + .start = MPC10X_EUMB_DMA_OFFSET + 0x10, + .end = MPC10X_EUMB_DMA_OFFSET + 0x1f, + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC10X_DMA1] = { + .name = "fsl-dma", + .id = 1, + .num_resources = 2, + .resource = (struct resource[]) { + { + .start = MPC10X_EUMB_DMA_OFFSET + 0x20, + .end = MPC10X_EUMB_DMA_OFFSET + 0x2f, + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC10X_DMA1] = { + .name = "fsl-dma", + .id = 1, + .num_resources = 2, + .resource = (struct resource[]) { + { + .start = MPC10X_EUMB_DMA_OFFSET + 0x20, + .end = MPC10X_EUMB_DMA_OFFSET + 0x2f, + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC10X_DUART] = { + .name = "serial8250", + .id = 0, + .dev.platform_data = serial_platform_data, + }, }; -static struct ocp_def mpc10x_dma_ocp[2] = { -{ .vendor = OCP_VENDOR_MOTOROLA, - .function = OCP_FUNC_DMA, - .index = 0 }, -{ .vendor = OCP_VENDOR_MOTOROLA, - .function = OCP_FUNC_DMA, - .index = 1 } +/* We use the PCI ID to match on */ +struct ppc_sys_spec *cur_ppc_sys_spec; +struct ppc_sys_spec ppc_sys_specs[] = { + { + .ppc_sys_name = "8245", + .mask = 0xFFFFFFFF, + .value = MPC10X_BRIDGE_8245, + .num_devices = 4, + .device_list = (enum ppc_sys_devices[]) + { + MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, MPC10X_DUART, + }, + }, + { + .ppc_sys_name = "8240", + .mask = 0xFFFFFFFF, + .value = MPC10X_BRIDGE_8240, + .num_devices = 3, + .device_list = (enum ppc_sys_devices[]) + { + MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, + }, + }, + { + .ppc_sys_name = "107", + .mask = 0xFFFFFFFF, + .value = MPC10X_BRIDGE_107, + .num_devices = 3, + .device_list = (enum ppc_sys_devices[]) + { + MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, + }, + }, + { /* default match */ + .ppc_sys_name = "", + .mask = 0x00000000, + .value = 0x00000000, + }, }; /* Set resources to match bridge memory map */ @@ -132,7 +231,7 @@ mpc10x_bridge_init(struct pci_controller *hose, uint new_map, uint phys_eumb_base) { - int host_bridge, picr1, picr1_bit; + int host_bridge, picr1, picr1_bit, i; ulong pci_config_addr, pci_config_data; u_char pir, byte; @@ -273,7 +372,7 @@ mpc10x_bridge_init(struct pci_controller *hose, printk("Host bridge in Agent mode\n"); /* Read or Set LMBAR & PCSRBAR? */ } - + /* Set base addr of the 8240/107 EUMB. */ early_write_config_dword(hose, 0, @@ -287,17 +386,6 @@ mpc10x_bridge_init(struct pci_controller *hose, ioremap(phys_eumb_base + MPC10X_EUMB_EPIC_OFFSET, MPC10X_EUMB_EPIC_SIZE); #endif - mpc10x_i2c_ocp.paddr = phys_eumb_base + MPC10X_EUMB_I2C_OFFSET; - mpc10x_i2c_ocp.irq = MPC10X_I2C_IRQ; - ocp_add_one_device(&mpc10x_i2c_ocp); - mpc10x_dma_ocp[0].paddr = phys_eumb_base + - MPC10X_EUMB_DMA_OFFSET + 0x100; - mpc10x_dma_ocp[0].irq = MPC10X_DMA0_IRQ; - ocp_add_one_device(&mpc10x_dma_ocp[0]); - mpc10x_dma_ocp[1].paddr = phys_eumb_base + - MPC10X_EUMB_DMA_OFFSET + 0x200; - mpc10x_dma_ocp[1].irq = MPC10X_DMA1_IRQ; - ocp_add_one_device(&mpc10x_dma_ocp[1]); } #ifdef CONFIG_MPC10X_STORE_GATHERING @@ -306,6 +394,29 @@ mpc10x_bridge_init(struct pci_controller *hose, mpc10x_disable_store_gathering(hose); #endif + /* setup platform devices for MPC10x bridges */ + identify_ppc_sys_by_id (host_bridge); + + for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) { + unsigned int dev_id = cur_ppc_sys_spec->device_list[i]; + ppc_sys_fixup_mem_resource(&ppc_sys_platform_devices[dev_id], + phys_eumb_base); + } + + /* IRQ's are determined at runtime */ + ppc_sys_platform_devices[MPC10X_IIC1].resource[1].start = MPC10X_I2C_IRQ; + ppc_sys_platform_devices[MPC10X_IIC1].resource[1].end = MPC10X_I2C_IRQ; + ppc_sys_platform_devices[MPC10X_DMA0].resource[1].start = MPC10X_DMA0_IRQ; + ppc_sys_platform_devices[MPC10X_DMA0].resource[1].end = MPC10X_DMA0_IRQ; + ppc_sys_platform_devices[MPC10X_DMA1].resource[1].start = MPC10X_DMA1_IRQ; + ppc_sys_platform_devices[MPC10X_DMA1].resource[1].end = MPC10X_DMA1_IRQ; + + serial_platform_data[0].mapbase += phys_eumb_base; + serial_platform_data[0].irq = MPC10X_UART0_IRQ; + + serial_platform_data[1].mapbase += phys_eumb_base; + serial_platform_data[1].irq = MPC10X_UART0_IRQ + 1; + /* * 8240 erratum 26, 8241/8245 erratum 29, 107 erratum 23: speculative * PCI reads may return stale data so turn off. @@ -330,7 +441,7 @@ mpc10x_bridge_init(struct pci_controller *hose, * 8245 (Rev 2., dated 10/2003) says PICR2[0] is reserverd. */ if (host_bridge == MPC10X_BRIDGE_8245) { - ulong picr2; + u32 picr2; early_read_config_dword(hose, 0, PCI_DEVFN(0,0), MPC10X_CFG_PICR2_REG, &picr2); @@ -504,6 +615,8 @@ void __init mpc10x_set_openpic(void) openpic_set_sources(EPIC_IRQ_BASE, 3, OpenPIC_Addr + 0x11020); /* Skip reserved space and map Message Unit Interrupt (I2O) */ openpic_set_sources(EPIC_IRQ_BASE + 3, 1, OpenPIC_Addr + 0x110C0); + /* Skip reserved space and map Serial Interupts */ + openpic_set_sources(EPIC_IRQ_BASE + 4, 2, OpenPIC_Addr + 0x11120); openpic_init(NUM_8259_INTERRUPTS); } diff --git a/arch/ppc/syslib/mpc83xx_devices.c b/arch/ppc/syslib/mpc83xx_devices.c index 5c1a919eaab..75c8e9834ae 100644 --- a/arch/ppc/syslib/mpc83xx_devices.c +++ b/arch/ppc/syslib/mpc83xx_devices.c @@ -61,6 +61,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, }, + { }, }; struct platform_device ppc_sys_platform_devices[] = { diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c index a231795ee26..8af322dd476 100644 --- a/arch/ppc/syslib/mpc85xx_devices.c +++ b/arch/ppc/syslib/mpc85xx_devices.c @@ -40,6 +40,42 @@ static struct gianfar_platform_data mpc85xx_tsec2_pdata = { .phy_reg_addr = MPC85xx_ENET1_OFFSET, }; +static struct gianfar_platform_data mpc85xx_etsec1_pdata = { + .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | + FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | + FSL_GIANFAR_DEV_HAS_MULTI_INTR | + FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN | + FSL_GIANFAR_DEV_HAS_EXTENDED_HASH, + .phy_reg_addr = MPC85xx_ENET1_OFFSET, +}; + +static struct gianfar_platform_data mpc85xx_etsec2_pdata = { + .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | + FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | + FSL_GIANFAR_DEV_HAS_MULTI_INTR | + FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN | + FSL_GIANFAR_DEV_HAS_EXTENDED_HASH, + .phy_reg_addr = MPC85xx_ENET1_OFFSET, +}; + +static struct gianfar_platform_data mpc85xx_etsec3_pdata = { + .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | + FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | + FSL_GIANFAR_DEV_HAS_MULTI_INTR | + FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN | + FSL_GIANFAR_DEV_HAS_EXTENDED_HASH, + .phy_reg_addr = MPC85xx_ENET1_OFFSET, +}; + +static struct gianfar_platform_data mpc85xx_etsec4_pdata = { + .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | + FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | + FSL_GIANFAR_DEV_HAS_MULTI_INTR | + FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN | + FSL_GIANFAR_DEV_HAS_EXTENDED_HASH, + .phy_reg_addr = MPC85xx_ENET1_OFFSET, +}; + static struct gianfar_platform_data mpc85xx_fec_pdata = { .phy_reg_addr = MPC85xx_ENET1_OFFSET, }; @@ -48,6 +84,10 @@ static struct fsl_i2c_platform_data mpc85xx_fsl_i2c_pdata = { .device_flags = FSL_I2C_DEV_SEPARATE_DFSRR, }; +static struct fsl_i2c_platform_data mpc85xx_fsl_i2c2_pdata = { + .device_flags = FSL_I2C_DEV_SEPARATE_DFSRR, +}; + static struct plat_serial8250_port serial_platform_data[] = { [0] = { .mapbase = 0x4500, @@ -61,6 +101,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ, }, + { }, }; struct platform_device ppc_sys_platform_devices[] = { @@ -280,7 +321,6 @@ struct platform_device ppc_sys_platform_devices[] = { }, }, }, -#ifdef CONFIG_CPM2 [MPC85xx_CPM_FCC1] = { .name = "fsl-cpm-fcc", .id = 1, @@ -534,7 +574,151 @@ struct platform_device ppc_sys_platform_devices[] = { }, }, }, -#endif /* CONFIG_CPM2 */ + [MPC85xx_eTSEC1] = { + .name = "fsl-gianfar", + .id = 1, + .dev.platform_data = &mpc85xx_etsec1_pdata, + .num_resources = 4, + .resource = (struct resource[]) { + { + .start = MPC85xx_ENET1_OFFSET, + .end = MPC85xx_ENET1_OFFSET + + MPC85xx_ENET1_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "tx", + .start = MPC85xx_IRQ_TSEC1_TX, + .end = MPC85xx_IRQ_TSEC1_TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = MPC85xx_IRQ_TSEC1_RX, + .end = MPC85xx_IRQ_TSEC1_RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "error", + .start = MPC85xx_IRQ_TSEC1_ERROR, + .end = MPC85xx_IRQ_TSEC1_ERROR, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC85xx_eTSEC2] = { + .name = "fsl-gianfar", + .id = 2, + .dev.platform_data = &mpc85xx_etsec2_pdata, + .num_resources = 4, + .resource = (struct resource[]) { + { + .start = MPC85xx_ENET2_OFFSET, + .end = MPC85xx_ENET2_OFFSET + + MPC85xx_ENET2_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "tx", + .start = MPC85xx_IRQ_TSEC2_TX, + .end = MPC85xx_IRQ_TSEC2_TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = MPC85xx_IRQ_TSEC2_RX, + .end = MPC85xx_IRQ_TSEC2_RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "error", + .start = MPC85xx_IRQ_TSEC2_ERROR, + .end = MPC85xx_IRQ_TSEC2_ERROR, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC85xx_eTSEC3] = { + .name = "fsl-gianfar", + .id = 3, + .dev.platform_data = &mpc85xx_etsec3_pdata, + .num_resources = 4, + .resource = (struct resource[]) { + { + .start = MPC85xx_ENET3_OFFSET, + .end = MPC85xx_ENET3_OFFSET + + MPC85xx_ENET3_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "tx", + .start = MPC85xx_IRQ_TSEC3_TX, + .end = MPC85xx_IRQ_TSEC3_TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = MPC85xx_IRQ_TSEC3_RX, + .end = MPC85xx_IRQ_TSEC3_RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "error", + .start = MPC85xx_IRQ_TSEC3_ERROR, + .end = MPC85xx_IRQ_TSEC3_ERROR, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC85xx_eTSEC4] = { + .name = "fsl-gianfar", + .id = 4, + .dev.platform_data = &mpc85xx_etsec4_pdata, + .num_resources = 4, + .resource = (struct resource[]) { + { + .start = 0x27000, + .end = 0x27fff, + .flags = IORESOURCE_MEM, + }, + { + .name = "tx", + .start = MPC85xx_IRQ_TSEC4_TX, + .end = MPC85xx_IRQ_TSEC4_TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = MPC85xx_IRQ_TSEC4_RX, + .end = MPC85xx_IRQ_TSEC4_RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "error", + .start = MPC85xx_IRQ_TSEC4_ERROR, + .end = MPC85xx_IRQ_TSEC4_ERROR, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC85xx_IIC2] = { + .name = "fsl-i2c", + .id = 2, + .dev.platform_data = &mpc85xx_fsl_i2c2_pdata, + .num_resources = 2, + .resource = (struct resource[]) { + { + .start = 0x03100, + .end = 0x031ff, + .flags = IORESOURCE_MEM, + }, + { + .start = MPC85xx_IRQ_IIC1, + .end = MPC85xx_IRQ_IIC1, + .flags = IORESOURCE_IRQ, + }, + }, + }, }; static int __init mach_mpc85xx_fixup(struct platform_device *pdev) diff --git a/arch/ppc/syslib/mpc85xx_sys.c b/arch/ppc/syslib/mpc85xx_sys.c index d806a92a940..6e3184ab354 100644 --- a/arch/ppc/syslib/mpc85xx_sys.c +++ b/arch/ppc/syslib/mpc85xx_sys.c @@ -110,6 +110,111 @@ struct ppc_sys_spec ppc_sys_specs[] = { MPC85xx_CPM_USB, }, }, + /* SVRs on 8548 rev1.0 matches for 8548/8547/8545 */ + { + .ppc_sys_name = "8548E", + .mask = 0xFFFF00F0, + .value = 0x80390010, + .num_devices = 13, + .device_list = (enum ppc_sys_devices[]) + { + MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3, + MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2, + MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, + MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2, + }, + }, + { + .ppc_sys_name = "8548", + .mask = 0xFFFF00F0, + .value = 0x80310010, + .num_devices = 12, + .device_list = (enum ppc_sys_devices[]) + { + MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3, + MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2, + MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, + MPC85xx_PERFMON, MPC85xx_DUART, + }, + }, + { + .ppc_sys_name = "8547E", + .mask = 0xFFFF00F0, + .value = 0x80390010, + .num_devices = 13, + .device_list = (enum ppc_sys_devices[]) + { + MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3, + MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2, + MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, + MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2, + }, + }, + { + .ppc_sys_name = "8547", + .mask = 0xFFFF00F0, + .value = 0x80310010, + .num_devices = 12, + .device_list = (enum ppc_sys_devices[]) + { + MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3, + MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2, + MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, + MPC85xx_PERFMON, MPC85xx_DUART, + }, + }, + { + .ppc_sys_name = "8545E", + .mask = 0xFFFF00F0, + .value = 0x80390010, + .num_devices = 11, + .device_list = (enum ppc_sys_devices[]) + { + MPC85xx_eTSEC1, MPC85xx_eTSEC2, + MPC85xx_IIC1, MPC85xx_IIC2, + MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, + MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2, + }, + }, + { + .ppc_sys_name = "8545", + .mask = 0xFFFF00F0, + .value = 0x80310010, + .num_devices = 10, + .device_list = (enum ppc_sys_devices[]) + { + MPC85xx_eTSEC1, MPC85xx_eTSEC2, + MPC85xx_IIC1, MPC85xx_IIC2, + MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, + MPC85xx_PERFMON, MPC85xx_DUART, + }, + }, + { + .ppc_sys_name = "8543E", + .mask = 0xFFFF00F0, + .value = 0x803A0010, + .num_devices = 11, + .device_list = (enum ppc_sys_devices[]) + { + MPC85xx_eTSEC1, MPC85xx_eTSEC2, + MPC85xx_IIC1, MPC85xx_IIC2, + MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, + MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2, + }, + }, + { + .ppc_sys_name = "8543", + .mask = 0xFFFF00F0, + .value = 0x80320010, + .num_devices = 10, + .device_list = (enum ppc_sys_devices[]) + { + MPC85xx_eTSEC1, MPC85xx_eTSEC2, + MPC85xx_IIC1, MPC85xx_IIC2, + MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, + MPC85xx_PERFMON, MPC85xx_DUART, + }, + }, { /* default match */ .ppc_sys_name = "", .mask = 0x00000000, diff --git a/arch/ppc/syslib/ocp.c b/arch/ppc/syslib/ocp.c index a5156c5179a..e5fd2ae503e 100644 --- a/arch/ppc/syslib/ocp.c +++ b/arch/ppc/syslib/ocp.c @@ -68,7 +68,7 @@ static int ocp_inited; /* Sysfs support */ #define OCP_DEF_ATTR(field, format_string) \ static ssize_t \ -show_##field(struct device *dev, char *buf) \ +show_##field(struct device *dev, struct device_attribute *attr, char *buf) \ { \ struct ocp_device *odev = to_ocp_dev(dev); \ \ diff --git a/arch/ppc/syslib/of_device.c b/arch/ppc/syslib/of_device.c index 46269ed21ae..49c0e34e2d6 100644 --- a/arch/ppc/syslib/of_device.c +++ b/arch/ppc/syslib/of_device.c @@ -161,7 +161,7 @@ void of_unregister_driver(struct of_platform_driver *drv) } -static ssize_t dev_show_devspec(struct device *dev, char *buf) +static ssize_t dev_show_devspec(struct device *dev, struct device_attribute *attr, char *buf) { struct of_device *ofdev; diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c index 7619e16fcca..b45d8268bf9 100644 --- a/arch/ppc/syslib/open_pic.c +++ b/arch/ppc/syslib/open_pic.c @@ -21,7 +21,6 @@ #include <asm/signal.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/prom.h> #include <asm/sections.h> #include <asm/open_pic.h> #include <asm/i8259.h> @@ -275,7 +274,7 @@ static void __init openpic_enable_sie(void) } #endif -#if defined(CONFIG_EPIC_SERIAL_MODE) || defined(CONFIG_PM) +#if defined(CONFIG_EPIC_SERIAL_MODE) static void openpic_reset(void) { openpic_setfield(&OpenPIC->Global.Global_Configuration0, @@ -557,12 +556,10 @@ static void __init openpic_initipi(u_int ipi, u_int pri, u_int vec) */ void openpic_cause_IPI(u_int ipi, cpumask_t cpumask) { - cpumask_t phys; DECL_THIS_CPU; CHECK_THIS_CPU; check_arg_ipi(ipi); - phys = physmask(cpumask); openpic_write(&OpenPIC->THIS_CPU.IPI_Dispatch(ipi), cpus_addr(physmask(cpumask))[0]); } @@ -995,8 +992,6 @@ int openpic_resume(struct sys_device *sysdev) return 0; } - openpic_reset(); - /* OpenPIC sometimes seem to need some time to be fully back up... */ do { openpic_set_spurious(OPENPIC_VEC_SPURIOUS); diff --git a/arch/ppc/syslib/open_pic2.c b/arch/ppc/syslib/open_pic2.c index ea26da0d8b6..7e272c51a49 100644 --- a/arch/ppc/syslib/open_pic2.c +++ b/arch/ppc/syslib/open_pic2.c @@ -25,7 +25,6 @@ #include <asm/signal.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/prom.h> #include <asm/sections.h> #include <asm/open_pic.h> #include <asm/i8259.h> diff --git a/arch/ppc/syslib/ppc4xx_kgdb.c b/arch/ppc/syslib/ppc4xx_kgdb.c deleted file mode 100644 index fe8668bf813..00000000000 --- a/arch/ppc/syslib/ppc4xx_kgdb.c +++ /dev/null @@ -1,124 +0,0 @@ -#include <linux/config.h> -#include <linux/types.h> -#include <asm/ibm4xx.h> -#include <linux/kernel.h> - - - -#define LSR_DR 0x01 /* Data ready */ -#define LSR_OE 0x02 /* Overrun */ -#define LSR_PE 0x04 /* Parity error */ -#define LSR_FE 0x08 /* Framing error */ -#define LSR_BI 0x10 /* Break */ -#define LSR_THRE 0x20 /* Xmit holding register empty */ -#define LSR_TEMT 0x40 /* Xmitter empty */ -#define LSR_ERR 0x80 /* Error */ - -#include <platforms/4xx/ibm_ocp.h> - -extern struct NS16550* COM_PORTS[]; -#ifndef NULL -#define NULL 0x00 -#endif - -static volatile struct NS16550 *kgdb_debugport = NULL; - -volatile struct NS16550 * -NS16550_init(int chan) -{ - volatile struct NS16550 *com_port; - int quot; -#ifdef BASE_BAUD - quot = BASE_BAUD / 9600; -#else - quot = 0x000c; /* 0xc = 9600 baud (on a pc) */ -#endif - - com_port = (struct NS16550 *) COM_PORTS[chan]; - - com_port->lcr = 0x00; - com_port->ier = 0xFF; - com_port->ier = 0x00; - com_port->lcr = com_port->lcr | 0x80; /* Access baud rate */ - com_port->dll = ( quot & 0x00ff ); /* 0xc = 9600 baud */ - com_port->dlm = ( quot & 0xff00 ) >> 8; - com_port->lcr = 0x03; /* 8 data, 1 stop, no parity */ - com_port->mcr = 0x00; /* RTS/DTR */ - com_port->fcr = 0x07; /* Clear & enable FIFOs */ - - return( com_port ); -} - - -void -NS16550_putc(volatile struct NS16550 *com_port, unsigned char c) -{ - while ((com_port->lsr & LSR_THRE) == 0) - ; - com_port->thr = c; - return; -} - -unsigned char -NS16550_getc(volatile struct NS16550 *com_port) -{ - while ((com_port->lsr & LSR_DR) == 0) - ; - return (com_port->rbr); -} - -unsigned char -NS16550_tstc(volatile struct NS16550 *com_port) -{ - return ((com_port->lsr & LSR_DR) != 0); -} - - -#if defined(CONFIG_KGDB_TTYS0) -#define KGDB_PORT 0 -#elif defined(CONFIG_KGDB_TTYS1) -#define KGDB_PORT 1 -#elif defined(CONFIG_KGDB_TTYS2) -#define KGDB_PORT 2 -#elif defined(CONFIG_KGDB_TTYS3) -#define KGDB_PORT 3 -#else -#error "invalid kgdb_tty port" -#endif - -void putDebugChar( unsigned char c ) -{ - if ( kgdb_debugport == NULL ) - kgdb_debugport = NS16550_init(KGDB_PORT); - NS16550_putc( kgdb_debugport, c ); -} - -int getDebugChar( void ) -{ - if (kgdb_debugport == NULL) - kgdb_debugport = NS16550_init(KGDB_PORT); - - return(NS16550_getc(kgdb_debugport)); -} - -void kgdb_interruptible(int enable) -{ - return; -} - -void putDebugString(char* str) -{ - while (*str != '\0') { - putDebugChar(*str); - str++; - } - putDebugChar('\r'); - return; -} - -void -kgdb_map_scc(void) -{ - printk("kgdb init \n"); - kgdb_debugport = NS16550_init(KGDB_PORT); -} diff --git a/arch/ppc/syslib/ppc83xx_setup.c b/arch/ppc/syslib/ppc83xx_setup.c index c28f9d67948..602a86891f7 100644 --- a/arch/ppc/syslib/ppc83xx_setup.c +++ b/arch/ppc/syslib/ppc83xx_setup.c @@ -23,12 +23,12 @@ #include <linux/serial_core.h> #include <linux/serial_8250.h> -#include <asm/prom.h> #include <asm/time.h> #include <asm/mpc83xx.h> #include <asm/mmu.h> #include <asm/ppc_sys.h> #include <asm/kgdb.h> +#include <asm/delay.h> #include <syslib/ppc83xx_setup.h> @@ -117,7 +117,34 @@ mpc83xx_early_serial_map(void) void mpc83xx_restart(char *cmd) { + volatile unsigned char __iomem *reg; + unsigned char tmp; + + reg = ioremap(BCSR_PHYS_ADDR, BCSR_SIZE); + local_irq_disable(); + + /* + * Unlock the BCSR bits so a PRST will update the contents. + * Otherwise the reset asserts but doesn't clear. + */ + tmp = in_8(reg + BCSR_MISC_REG3_OFF); + tmp |= BCSR_MISC_REG3_CNFLOCK; /* low true, high false */ + out_8(reg + BCSR_MISC_REG3_OFF, tmp); + + /* + * Trigger a reset via a low->high transition of the + * PORESET bit. + */ + tmp = in_8(reg + BCSR_MISC_REG2_OFF); + tmp &= ~BCSR_MISC_REG2_PORESET; + out_8(reg + BCSR_MISC_REG2_OFF, tmp); + + udelay(1); + + tmp |= BCSR_MISC_REG2_PORESET; + out_8(reg + BCSR_MISC_REG2_OFF, tmp); + for(;;); } diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c index 152c3ef1312..ca95d79a704 100644 --- a/arch/ppc/syslib/ppc85xx_setup.c +++ b/arch/ppc/syslib/ppc85xx_setup.c @@ -23,7 +23,6 @@ #include <linux/serial_core.h> #include <linux/serial_8250.h> -#include <asm/prom.h> #include <asm/time.h> #include <asm/mpc85xx.h> #include <asm/immap_85xx.h> @@ -33,6 +32,8 @@ #include <syslib/ppc85xx_setup.h> +extern void abort(void); + /* Return the amount of memory */ unsigned long __init mpc85xx_find_end_of_memory(void) @@ -132,6 +133,12 @@ mpc85xx_halt(void) } #ifdef CONFIG_PCI + +#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS) +extern void mpc85xx_cds_enable_via(struct pci_controller *hose); +extern void mpc85xx_cds_fixup_via(struct pci_controller *hose); +#endif + static void __init mpc85xx_setup_pci1(struct pci_controller *hose) { @@ -302,8 +309,18 @@ mpc85xx_setup_hose(void) ppc_md.pci_exclude_device = mpc85xx_exclude_device; +#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS) + /* Pre pciauto_bus_scan VIA init */ + mpc85xx_cds_enable_via(hose_a); +#endif + hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno); +#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS) + /* Post pciauto_bus_scan VIA fixup */ + mpc85xx_cds_fixup_via(hose_a); +#endif + #ifdef CONFIG_85xx_PCI2 hose_b = pcibios_alloc_controller(); diff --git a/arch/ppc/syslib/prom_init.c b/arch/ppc/syslib/prom_init.c index 2cee87137f2..7f15136830f 100644 --- a/arch/ppc/syslib/prom_init.c +++ b/arch/ppc/syslib/prom_init.c @@ -626,8 +626,18 @@ inspect_node(phandle node, struct device_node *dad, l = call_prom("package-to-path", 3, 1, node, mem_start, mem_end - mem_start); if (l >= 0) { + char *p, *ep; + np->full_name = PTRUNRELOC((char *) mem_start); *(char *)(mem_start + l) = 0; + /* Fixup an Apple bug where they have bogus \0 chars in the + * middle of the path in some properties + */ + for (p = (char *)mem_start, ep = p + l; p < ep; p++) + if ((*p) == '\0') { + memmove(p, p+1, ep - p); + ep--; + } mem_start = ALIGNUL(mem_start + l + 1); } diff --git a/arch/ppc/xmon/xmon.c b/arch/ppc/xmon/xmon.c index 8565f49b8b0..be7869e3946 100644 --- a/arch/ppc/xmon/xmon.c +++ b/arch/ppc/xmon/xmon.c @@ -9,6 +9,7 @@ #include <linux/smp.h> #include <linux/interrupt.h> #include <linux/bitops.h> +#include <linux/kallsyms.h> #include <asm/ptrace.h> #include <asm/string.h> #include <asm/prom.h> @@ -93,8 +94,7 @@ static void take_input(char *); static unsigned read_spr(int); static void write_spr(int, unsigned); static void super_regs(void); -static void print_sysmap(void); -static void sysmap_lookup(void); +static void symbol_lookup(void); static void remove_bpts(void); static void insert_bpts(void); static struct bpt *at_breakpoint(unsigned pc); @@ -103,7 +103,6 @@ static void cacheflush(void); #ifdef CONFIG_SMP static void cpu_cmd(void); #endif /* CONFIG_SMP */ -static int pretty_print_addr(unsigned long addr); static void csum(void); #ifdef CONFIG_BOOTX_TEXT static void vidcmds(void); @@ -120,8 +119,6 @@ extern void longjmp(u_int *, int); extern void xmon_enter(void); extern void xmon_leave(void); -extern char* xmon_find_symbol(unsigned long addr, unsigned long* saddr); -extern unsigned long xmon_symbol_to_addr(char* symbol); static unsigned start_tb[NR_CPUS][2]; static unsigned stop_tb[NR_CPUS][2]; @@ -148,7 +145,6 @@ Commands:\n\ mm move a block of memory\n\ ms set a block of memory\n\ md compare two blocks of memory\n\ - M print System.map\n\ r print registers\n\ S print special registers\n\ t print backtrace\n\ @@ -175,6 +171,35 @@ extern inline void __delay(unsigned int loops) "r" (loops) : "ctr"); } +/* Print an address in numeric and symbolic form (if possible) */ +static void xmon_print_symbol(unsigned long address, const char *mid, + const char *after) +{ + char *modname; + const char *name = NULL; + unsigned long offset, size; + static char tmpstr[128]; + + printf("%.8lx", address); + if (setjmp(bus_error_jmp) == 0) { + debugger_fault_handler = handle_fault; + sync(); + name = kallsyms_lookup(address, &size, &offset, &modname, + tmpstr); + sync(); + /* wait a little while to see if we get a machine check */ + __delay(200); + } + debugger_fault_handler = NULL; + + if (name) { + printf("%s%s+%#lx/%#lx", mid, name, offset, size); + if (modname) + printf(" [%s]", modname); + } + printf("%s", after); +} + static void get_tb(unsigned *p) { unsigned hi, lo, hiagain; @@ -454,7 +479,7 @@ cmds(struct pt_regs *excp) dump(); break; case 'l': - sysmap_lookup(); + symbol_lookup(); break; case 'r': if (excp != NULL) @@ -466,9 +491,6 @@ cmds(struct pt_regs *excp) else excprint(excp); break; - case 'M': - print_sysmap(); - break; case 'S': super_regs(); break; @@ -825,20 +847,19 @@ backtrace(struct pt_regs *excp) for (; sp != 0; sp = stack[0]) { if (mread(sp, stack, sizeof(stack)) != sizeof(stack)) break; - pretty_print_addr(stack[1]); - printf(" "); + printf("[%.8lx] ", stack); + xmon_print_symbol(stack[1], " ", "\n"); if (stack[1] == (unsigned) &ret_from_except || stack[1] == (unsigned) &ret_from_except_full || stack[1] == (unsigned) &ret_from_syscall) { if (mread(sp+16, ®s, sizeof(regs)) != sizeof(regs)) break; - printf("\nexception:%x [%x] %x ", regs.trap, sp+16, + printf("exception:%x [%x] %x\n", regs.trap, sp+16, regs.nip); sp = regs.gpr[1]; if (mread(sp, stack, sizeof(stack)) != sizeof(stack)) break; } - printf("\n"); } } @@ -859,11 +880,10 @@ excprint(struct pt_regs *fp) #ifdef CONFIG_SMP printf("cpu %d: ", smp_processor_id()); #endif /* CONFIG_SMP */ - printf("vector: %x at pc = ", fp->trap); - pretty_print_addr(fp->nip); - printf(", lr = "); - pretty_print_addr(fp->link); - printf("\nmsr = %x, sp = %x [%x]\n", fp->msr, fp->gpr[1], fp); + printf("vector: %x at pc=", fp->trap); + xmon_print_symbol(fp->nip, ": ", ", lr="); + xmon_print_symbol(fp->link, ": ", "\n"); + printf("msr = %x, sp = %x [%x]\n", fp->msr, fp->gpr[1], fp); trap = TRAP(fp); if (trap == 0x300 || trap == 0x600) printf("dar = %x, dsisr = %x\n", fp->dar, fp->dsisr); @@ -951,24 +971,6 @@ extern char exc_prolog; extern char dec_exc; void -print_sysmap(void) -{ - extern char *sysmap; - if ( sysmap ) { - printf("System.map: \n"); - if( setjmp(bus_error_jmp) == 0 ) { - debugger_fault_handler = handle_fault; - sync(); - xmon_puts(sysmap); - sync(); - } - debugger_fault_handler = NULL; - } - else - printf("No System.map\n"); -} - -void super_regs(void) { int i, cmd; @@ -1738,7 +1740,7 @@ scanhex(unsigned *vp) printf("invalid register name '%%%s'\n", regname); return 0; } else if (c == '$') { - static char symname[64]; + static char symname[128]; int i; for (i=0; i<63; i++) { c = inchar(); @@ -1749,7 +1751,14 @@ scanhex(unsigned *vp) symname[i] = c; } symname[i++] = 0; - *vp = xmon_symbol_to_addr(symname); + *vp = 0; + if (setjmp(bus_error_jmp) == 0) { + debugger_fault_handler = handle_fault; + sync(); + *vp = kallsyms_lookup_name(symname); + sync(); + } + debugger_fault_handler = NULL; if (!(*vp)) { printf("unknown symbol\n"); return 0; @@ -1840,169 +1849,34 @@ take_input(char *str) lineptr = str; } -void -sysmap_lookup(void) +static void +symbol_lookup(void) { int type = inchar(); unsigned addr; - static char tmp[64]; - char* cur; - - extern char *sysmap; - extern unsigned long sysmap_size; - if ( !sysmap || !sysmap_size ) - return; - - switch(type) { - case 'a': - if (scanhex(&addr)) { - pretty_print_addr(addr); - printf("\n"); - } - termch = 0; - break; - case 's': - getstring(tmp, 64); - if( setjmp(bus_error_jmp) == 0 ) { - debugger_fault_handler = handle_fault; - sync(); - cur = sysmap; - do { - cur = strstr(cur, tmp); - if (cur) { - static char res[64]; - char *p, *d; - p = cur; - while(p > sysmap && *p != 10) - p--; - if (*p == 10) p++; - d = res; - while(*p && p < (sysmap + sysmap_size) && *p != 10) - *(d++) = *(p++); - *(d++) = 0; - printf("%s\n", res); - cur++; - } - } while (cur); - sync(); - } - debugger_fault_handler = NULL; - termch = 0; - break; - } -} + static char tmp[128]; -static int -pretty_print_addr(unsigned long addr) -{ - char *sym; - unsigned long saddr; - - printf("%08x", addr); - sym = xmon_find_symbol(addr, &saddr); - if (sym) - printf(" (%s+0x%x)", sym, addr-saddr); - return (sym != 0); -} - -char* -xmon_find_symbol(unsigned long addr, unsigned long* saddr) -{ - static char rbuffer[64]; - char *p, *ep, *limit; - unsigned long prev, next; - char* psym; - - extern char *sysmap; - extern unsigned long sysmap_size; - if ( !sysmap || !sysmap_size ) - return NULL; - - prev = 0; - psym = NULL; - p = sysmap; - limit = p + sysmap_size; - if( setjmp(bus_error_jmp) == 0 ) { - debugger_fault_handler = handle_fault; - sync(); - do { - next = simple_strtoul(p, &p, 16); - if (next > addr && prev <= addr) { - if (!psym) - goto bail; - ep = rbuffer; - p = psym; - while(*p && p < limit && *p == 32) - p++; - while(*p && p < limit && *p != 10 && (ep - rbuffer) < 63) - *(ep++) = *(p++); - *(ep++) = 0; - if (saddr) - *saddr = prev; - debugger_fault_handler = NULL; - return rbuffer; - } - prev = next; - psym = p; - while(*p && p < limit && *p != 10) - p++; - if (*p) p++; - } while(*p && p < limit && next); -bail: - sync(); + switch (type) { + case 'a': + if (scanhex(&addr)) + xmon_print_symbol(addr, ": ", "\n"); + termch = 0; + break; + case 's': + getstring(tmp, 64); + if (setjmp(bus_error_jmp) == 0) { + debugger_fault_handler = handle_fault; + sync(); + addr = kallsyms_lookup_name(tmp); + if (addr) + printf("%s: %lx\n", tmp, addr); + else + printf("Symbol '%s' not found.\n", tmp); + sync(); + } + debugger_fault_handler = NULL; + termch = 0; + break; } - debugger_fault_handler = NULL; - return NULL; } -unsigned long -xmon_symbol_to_addr(char* symbol) -{ - char *p, *cur; - char *match = NULL; - int goodness = 0; - int result = 0; - - extern char *sysmap; - extern unsigned long sysmap_size; - if ( !sysmap || !sysmap_size ) - return 0; - - if( setjmp(bus_error_jmp) == 0 ) { - debugger_fault_handler = handle_fault; - sync(); - cur = sysmap; - while(cur) { - cur = strstr(cur, symbol); - if (cur) { - int gd = 1; - - /* best match if equal, better match if - * begins with - */ - if (cur == sysmap || *(cur-1) == ' ') { - gd++; - if (cur[strlen(symbol)] == 10) - gd++; - } - if (gd > goodness) { - match = cur; - goodness = gd; - if (gd == 3) - break; - } - cur++; - } - } - if (goodness) { - p = match; - while(p > sysmap && *p != 10) - p--; - if (*p == 10) p++; - result = simple_strtoul(p, &p, 16); - } - sync(); - } - debugger_fault_handler = NULL; - return result; -} diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig index 5cb343883e4..0f1fa289744 100644 --- a/arch/ppc64/Kconfig +++ b/arch/ppc64/Kconfig @@ -323,7 +323,7 @@ config EISA bool config PCI - bool + bool "support for PCI devices" if (EMBEDDED && PPC_ISERIES) default y help Find out whether your system includes a PCI bus. PCI is the name of diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile index 691f3008e69..33c752ceca4 100644 --- a/arch/ppc64/Makefile +++ b/arch/ppc64/Makefile @@ -35,9 +35,9 @@ CROSS32AS := $(AS) -a32 CROSS32LD := $(LD) -m elf32ppc CROSS32OBJCOPY := $(OBJCOPY) endif -AS := $(AS) -a64 -LD := $(LD) -m elf64ppc -CC := $(CC) -m64 +override AS += -a64 +override LD += -m elf64ppc +override CC += -m64 endif export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY diff --git a/arch/ppc64/boot/prom.c b/arch/ppc64/boot/prom.c index 7b607d1862c..d5218b15824 100644 --- a/arch/ppc64/boot/prom.c +++ b/arch/ppc64/boot/prom.c @@ -11,6 +11,23 @@ #include <linux/string.h> #include <linux/ctype.h> +extern __u32 __div64_32(unsigned long long *dividend, __u32 divisor); + +/* The unnecessary pointer compare is there + * to check for type safety (n must be 64bit) + */ +# define do_div(n,base) ({ \ + __u32 __base = (base); \ + __u32 __rem; \ + (void)(((typeof((n)) *)0) == ((unsigned long long *)0)); \ + if (((n) >> 32) == 0) { \ + __rem = (__u32)(n) % __base; \ + (n) = (__u32)(n) / __base; \ + } else \ + __rem = __div64_32(&(n), __base); \ + __rem; \ + }) + int (*prom)(void *); void *chosen_handle; @@ -352,7 +369,7 @@ static int skip_atoi(const char **s) #define SPECIAL 32 /* 0x */ #define LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */ -static char * number(char * str, long num, int base, int size, int precision, int type) +static char * number(char * str, unsigned long long num, int base, int size, int precision, int type) { char c,sign,tmp[66]; const char *digits="0123456789abcdefghijklmnopqrstuvwxyz"; @@ -367,9 +384,9 @@ static char * number(char * str, long num, int base, int size, int precision, in c = (type & ZEROPAD) ? '0' : ' '; sign = 0; if (type & SIGN) { - if (num < 0) { + if ((signed long long)num < 0) { sign = '-'; - num = -num; + num = - (signed long long)num; size--; } else if (type & PLUS) { sign = '+'; @@ -389,8 +406,7 @@ static char * number(char * str, long num, int base, int size, int precision, in if (num == 0) tmp[i++]='0'; else while (num != 0) { - tmp[i++] = digits[num % base]; - num /= base; + tmp[i++] = digits[do_div(num, base)]; } if (i > precision) precision = i; @@ -426,7 +442,7 @@ int sprintf(char * buf, const char *fmt, ...); int vsprintf(char *buf, const char *fmt, va_list args) { int len; - unsigned long num; + unsigned long long num; int i, base; char * str; const char *s; diff --git a/arch/ppc64/configs/g5_defconfig b/arch/ppc64/configs/g5_defconfig index 0f90df0b3f9..1eb33398648 100644 --- a/arch/ppc64/configs/g5_defconfig +++ b/arch/ppc64/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11 -# Thu Mar 10 16:47:04 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 16:59:20 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -31,19 +32,20 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=17 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 @@ -87,6 +89,8 @@ CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -97,6 +101,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # CONFIG_HOTPLUG_CPU is not set # @@ -105,10 +110,6 @@ CONFIG_PCI_NAMES=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set @@ -293,7 +294,6 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -301,7 +301,6 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -310,6 +309,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -332,6 +332,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support @@ -394,7 +395,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -564,6 +564,8 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set CONFIG_TIGON3=m +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -631,18 +633,6 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -660,6 +650,16 @@ CONFIG_INPUT_MOUSE=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -676,6 +676,7 @@ CONFIG_HW_CONSOLE=y # Non-8250 serial port support # # CONFIG_SERIAL_PMACZILOG is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -698,9 +699,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Ftape, the floppy tape device driver # +CONFIG_AGP=m +CONFIG_AGP_UNINORTH=m # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set # # TPM devices @@ -730,12 +734,11 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set CONFIG_I2C_KEYWEST=y -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set @@ -772,6 +775,7 @@ CONFIG_I2C_KEYWEST=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -785,6 +789,7 @@ CONFIG_I2C_KEYWEST=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -817,6 +822,11 @@ CONFIG_I2C_KEYWEST=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set @@ -830,6 +840,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_NVIDIA is not set CONFIG_FB_RIVA=y # CONFIG_FB_RIVA_I2C is not set # CONFIG_FB_RIVA_DEBUG is not set @@ -847,6 +858,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -880,6 +892,8 @@ CONFIG_LCD_DEVICE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -890,8 +904,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -917,7 +929,6 @@ CONFIG_USB_PRINTER=y # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_RW_DETECT=y CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y @@ -1004,8 +1015,10 @@ CONFIG_USB_MON=y # CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set CONFIG_USB_SERIAL_BELKIN=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m @@ -1034,6 +1047,7 @@ CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_SAFE_PADDED=y CONFIG_USB_SERIAL_TI=m @@ -1270,11 +1284,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y -# CONFIG_PRINTK_TIME is not set +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set diff --git a/arch/ppc64/configs/iSeries_defconfig b/arch/ppc64/configs/iSeries_defconfig index a39e9d2e25d..f6a2b99afd6 100644 --- a/arch/ppc64/configs/iSeries_defconfig +++ b/arch/ppc64/configs/iSeries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:52 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 17:01:28 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,29 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -79,6 +85,8 @@ CONFIG_NR_CPUS=32 CONFIG_GENERIC_HARDIRQS=y CONFIG_MSCHUNKS=y CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -89,6 +97,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -96,10 +105,6 @@ CONFIG_PCI_NAMES=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set @@ -210,7 +215,6 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -219,7 +223,6 @@ CONFIG_SCSI_IBMVSCSI=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -228,6 +231,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -250,6 +254,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support @@ -280,7 +285,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -445,7 +449,6 @@ CONFIG_PCNET32=y # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -471,6 +474,7 @@ CONFIG_E1000=m # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -539,14 +543,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -556,6 +552,12 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # # CONFIG_SERIAL_NONSTANDARD is not set @@ -570,6 +572,7 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_SERIAL_CORE=m CONFIG_SERIAL_ICOM=m +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -592,9 +595,16 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -633,13 +643,9 @@ CONFIG_MAX_RAW_DEVS=256 # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -848,10 +854,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -881,6 +890,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m diff --git a/arch/ppc64/configs/maple_defconfig b/arch/ppc64/configs/maple_defconfig index cf527501915..8051b0f47b6 100644 --- a/arch/ppc64/configs/maple_defconfig +++ b/arch/ppc64/configs/maple_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:53 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 17:12:48 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,28 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_AUDIT is not set # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -84,6 +89,8 @@ CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -94,6 +101,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -101,10 +109,6 @@ CONFIG_PCI_NAMES=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set @@ -261,7 +265,6 @@ CONFIG_NET=y # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -376,6 +379,8 @@ CONFIG_E1000=y # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -432,14 +437,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -449,6 +446,12 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -469,7 +472,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -492,8 +495,15 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -518,8 +528,8 @@ CONFIG_I2C_ALGOBIT=y CONFIG_I2C_AMD8111=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -545,7 +555,9 @@ CONFIG_I2C_AMD8111=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -556,9 +568,11 @@ CONFIG_I2C_AMD8111=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -568,6 +582,7 @@ CONFIG_I2C_AMD8111=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -615,6 +630,8 @@ CONFIG_DUMMY_CONSOLE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -625,8 +642,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -635,6 +650,8 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -688,6 +705,7 @@ CONFIG_USB_HIDINPUT=y CONFIG_USB_PEGASUS=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y # # USB port drivers @@ -699,8 +717,10 @@ CONFIG_USB_PEGASUS=y CONFIG_USB_SERIAL=y # CONFIG_USB_SERIAL_CONSOLE is not set CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set CONFIG_USB_SERIAL_CYPRESS_M8=m # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set @@ -729,6 +749,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set CONFIG_USB_SERIAL_TI=m # CONFIG_USB_SERIAL_CYBERJACK is not set @@ -750,6 +771,7 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_TEST is not set # @@ -936,10 +958,13 @@ CONFIG_NLS_UTF8=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set CONFIG_DEBUG_SLAB=y +# CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -971,6 +996,7 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set diff --git a/arch/ppc64/configs/pSeries_defconfig b/arch/ppc64/configs/pSeries_defconfig index 4fecf237d5c..3eb5ef25d3a 100644 --- a/arch/ppc64/configs/pSeries_defconfig +++ b/arch/ppc64/configs/pSeries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:54 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 17:13:47 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,29 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_CPUSETS=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -89,9 +95,12 @@ CONFIG_SCHED_SMT=y CONFIG_EEH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_PPC_RTAS=y +CONFIG_RTAS_PROC=y CONFIG_RTAS_FLASH=m CONFIG_SCANLOG=m CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -102,6 +111,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set CONFIG_HOTPLUG_CPU=y # @@ -110,10 +120,6 @@ CONFIG_HOTPLUG_CPU=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # CONFIG_HOTPLUG_PCI=m @@ -147,11 +153,10 @@ CONFIG_FW_LOADER=y # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_OTHER is not set +# CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_1284 is not set # @@ -293,7 +298,6 @@ CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -310,7 +314,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_IPR=y CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -319,6 +322,7 @@ CONFIG_SCSI_QLA22XX=m CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m CONFIG_SCSI_QLA6312=m +CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -341,6 +345,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -371,7 +377,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -539,7 +544,6 @@ CONFIG_PCNET32=y # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -565,6 +569,8 @@ CONFIG_E1000=y # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -636,20 +642,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -669,6 +661,18 @@ CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_UINPUT is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -689,8 +693,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_ICOM=m +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -718,9 +722,16 @@ CONFIG_HVCS=m # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=1024 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -745,8 +756,8 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -773,7 +784,9 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -784,9 +797,11 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -796,6 +811,7 @@ CONFIG_I2C_ALGOBIT=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -828,8 +844,13 @@ CONFIG_I2C_ALGOBIT=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set @@ -838,6 +859,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y @@ -858,6 +880,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -891,6 +914,8 @@ CONFIG_LCD_DEVICE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -901,8 +926,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -911,6 +934,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -926,12 +951,11 @@ CONFIG_USB_OHCI_HCD=y # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_RW_DETECT is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set @@ -975,6 +999,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y # # USB port drivers @@ -1000,6 +1025,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_TEST is not set # @@ -1208,10 +1234,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -1243,6 +1272,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m diff --git a/arch/ppc64/defconfig b/arch/ppc64/defconfig index 537b1cc82ea..2f31bf3046f 100644 --- a/arch/ppc64/defconfig +++ b/arch/ppc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:51 2005 +# Linux kernel version: 2.6.12-rc5-git9 +# Sun Jun 5 09:26:47 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,28 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_AUDIT is not set CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_CPUSETS=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -91,9 +96,12 @@ CONFIG_DISCONTIGMEM=y CONFIG_EEH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_PPC_RTAS=y +CONFIG_RTAS_PROC=y CONFIG_RTAS_FLASH=m CONFIG_SCANLOG=m CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -104,6 +112,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_NAMES is not set +# CONFIG_PCI_DEBUG is not set CONFIG_HOTPLUG_CPU=y # @@ -112,10 +121,6 @@ CONFIG_HOTPLUG_CPU=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # CONFIG_HOTPLUG_PCI=m @@ -149,11 +154,10 @@ CONFIG_FW_LOADER=y # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_OTHER is not set +# CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_1284 is not set # @@ -301,6 +305,7 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set # CONFIG_SCSI_SATA_SIS is not set @@ -310,7 +315,6 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -327,7 +331,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_IPR=y CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -336,6 +339,7 @@ CONFIG_SCSI_QLA22XX=m CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m CONFIG_SCSI_QLA6312=m +CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set CONFIG_SCSI_DEBUG=m @@ -358,6 +362,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -405,6 +411,7 @@ CONFIG_IEEE1394_AMDTP=m # CONFIG_ADB=y CONFIG_ADB_PMU=y +CONFIG_PMAC_SMU=y # CONFIG_PMAC_PBOOK is not set # CONFIG_PMAC_BACKLIGHT is not set # CONFIG_INPUT_ADBHID is not set @@ -420,7 +427,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -588,7 +594,6 @@ CONFIG_PCNET32=y # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -614,6 +619,8 @@ CONFIG_E1000=y # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -683,20 +690,6 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -716,6 +709,18 @@ CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_UINPUT is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -738,6 +743,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_ICOM=m +CONFIG_SERIAL_JSM=m CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -766,9 +772,16 @@ CONFIG_HVCS=m # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -793,9 +806,9 @@ CONFIG_I2C_ALGOBIT=y CONFIG_I2C_AMD8111=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set CONFIG_I2C_KEYWEST=y -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -822,7 +835,9 @@ CONFIG_I2C_KEYWEST=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -833,9 +848,11 @@ CONFIG_I2C_KEYWEST=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -845,6 +862,7 @@ CONFIG_I2C_KEYWEST=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -877,6 +895,11 @@ CONFIG_I2C_KEYWEST=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set @@ -890,9 +913,8 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set -CONFIG_FB_RIVA=y -CONFIG_FB_RIVA_I2C=y -# CONFIG_FB_RIVA_DEBUG is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y @@ -913,6 +935,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -946,6 +969,8 @@ CONFIG_LCD_DEVICE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -956,8 +981,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -966,6 +989,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -981,12 +1006,11 @@ CONFIG_USB_OHCI_HCD=y # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_RW_DETECT=y # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set @@ -1030,6 +1054,7 @@ CONFIG_USB_HIDDEV=y CONFIG_USB_PEGASUS=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set # # USB port drivers @@ -1055,6 +1080,7 @@ CONFIG_USB_PEGASUS=y # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_TEST is not set # @@ -1276,10 +1302,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -1311,6 +1340,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m diff --git a/arch/ppc64/kernel/HvLpEvent.c b/arch/ppc64/kernel/HvLpEvent.c index f8f19637f73..90032b13890 100644 --- a/arch/ppc64/kernel/HvLpEvent.c +++ b/arch/ppc64/kernel/HvLpEvent.c @@ -12,7 +12,7 @@ #include <asm/system.h> #include <asm/iSeries/HvLpEvent.h> #include <asm/iSeries/HvCallEvent.h> -#include <asm/iSeries/LparData.h> +#include <asm/iSeries/ItLpNaca.h> /* Array of LpEvent handler functions */ LpEventHandler lpEventHandler[HvLpEvent_Type_NumTypes]; diff --git a/arch/ppc64/kernel/ItLpQueue.c b/arch/ppc64/kernel/ItLpQueue.c index c923a815760..cdea00d7707 100644 --- a/arch/ppc64/kernel/ItLpQueue.c +++ b/arch/ppc64/kernel/ItLpQueue.c @@ -16,7 +16,6 @@ #include <asm/iSeries/ItLpQueue.h> #include <asm/iSeries/HvLpEvent.h> #include <asm/iSeries/HvCallEvent.h> -#include <asm/iSeries/LparData.h> static __inline__ int set_inUse( struct ItLpQueue * lpQueue ) { diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index 96d90b0c511..b5e167cf1a0 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -16,14 +16,13 @@ obj-y += vdso32/ vdso64/ obj-$(CONFIG_PPC_OF) += of_device.o -pci-obj-$(CONFIG_PPC_ISERIES) += iSeries_pci.o iSeries_pci_reset.o +pci-obj-$(CONFIG_PPC_ISERIES) += iSeries_pci.o iSeries_irq.o \ + iSeries_VpdInfo.o pci-obj-$(CONFIG_PPC_MULTIPLATFORM) += pci_dn.o pci_direct_iommu.o obj-$(CONFIG_PCI) += pci.o pci_iommu.o iomap.o $(pci-obj-y) -obj-$(CONFIG_PPC_ISERIES) += iSeries_irq.o \ - iSeries_VpdInfo.o XmPciLpEvent.o \ - HvCall.o HvLpConfig.o LparData.o \ +obj-$(CONFIG_PPC_ISERIES) += HvCall.o HvLpConfig.o LparData.o \ iSeries_setup.o ItLpQueue.o hvCall.o \ mf.o HvLpEvent.o iSeries_proc.o iSeries_htab.o \ iSeries_iommu.o diff --git a/arch/ppc64/kernel/XmPciLpEvent.c b/arch/ppc64/kernel/XmPciLpEvent.c deleted file mode 100644 index 809c9bc6678..00000000000 --- a/arch/ppc64/kernel/XmPciLpEvent.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * File XmPciLpEvent.h created by Wayne Holm on Mon Jan 15 2001. - * - * This module handles PCI interrupt events sent by the iSeries Hypervisor. -*/ - -#include <linux/config.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/threads.h> -#include <linux/smp.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/bootmem.h> -#include <linux/ide.h> - -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/HvCallPci.h> -#include <asm/iSeries/XmPciLpEvent.h> -#include <asm/ppcdebug.h> - -static long Pci_Interrupt_Count; -static long Pci_Event_Count; - -enum XmPciLpEvent_Subtype { - XmPciLpEvent_BusCreated = 0, // PHB has been created - XmPciLpEvent_BusError = 1, // PHB has failed - XmPciLpEvent_BusFailed = 2, // Msg to Secondary, Primary failed bus - XmPciLpEvent_NodeFailed = 4, // Multi-adapter bridge has failed - XmPciLpEvent_NodeRecovered = 5, // Multi-adapter bridge has recovered - XmPciLpEvent_BusRecovered = 12, // PHB has been recovered - XmPciLpEvent_UnQuiesceBus = 18, // Secondary bus unqiescing - XmPciLpEvent_BridgeError = 21, // Bridge Error - XmPciLpEvent_SlotInterrupt = 22 // Slot interrupt -}; - -struct XmPciLpEvent_BusInterrupt { - HvBusNumber busNumber; - HvSubBusNumber subBusNumber; -}; - -struct XmPciLpEvent_NodeInterrupt { - HvBusNumber busNumber; - HvSubBusNumber subBusNumber; - HvAgentId deviceId; -}; - -struct XmPciLpEvent { - struct HvLpEvent hvLpEvent; - - union { - u64 alignData; // Align on an 8-byte boundary - - struct { - u32 fisr; - HvBusNumber busNumber; - HvSubBusNumber subBusNumber; - HvAgentId deviceId; - } slotInterrupt; - - struct XmPciLpEvent_BusInterrupt busFailed; - struct XmPciLpEvent_BusInterrupt busRecovered; - struct XmPciLpEvent_BusInterrupt busCreated; - - struct XmPciLpEvent_NodeInterrupt nodeFailed; - struct XmPciLpEvent_NodeInterrupt nodeRecovered; - - } eventData; - -}; - -static void intReceived(struct XmPciLpEvent *eventParm, - struct pt_regs *regsParm); - -static void XmPciLpEvent_handler(struct HvLpEvent *eventParm, - struct pt_regs *regsParm) -{ -#ifdef CONFIG_PCI -#if 0 - PPCDBG(PPCDBG_BUSWALK, "XmPciLpEvent_handler, type 0x%x\n", - eventParm->xType); -#endif - ++Pci_Event_Count; - - if (eventParm && (eventParm->xType == HvLpEvent_Type_PciIo)) { - switch (eventParm->xFlags.xFunction) { - case HvLpEvent_Function_Int: - intReceived((struct XmPciLpEvent *)eventParm, regsParm); - break; - case HvLpEvent_Function_Ack: - printk(KERN_ERR - "XmPciLpEvent.c: unexpected ack received\n"); - break; - default: - printk(KERN_ERR - "XmPciLpEvent.c: unexpected event function %d\n", - (int)eventParm->xFlags.xFunction); - break; - } - } else if (eventParm) - printk(KERN_ERR - "XmPciLpEvent.c: Unrecognized PCI event type 0x%x\n", - (int)eventParm->xType); - else - printk(KERN_ERR "XmPciLpEvent.c: NULL event received\n"); -#endif -} - -static void intReceived(struct XmPciLpEvent *eventParm, - struct pt_regs *regsParm) -{ - int irq; - - ++Pci_Interrupt_Count; -#if 0 - PPCDBG(PPCDBG_BUSWALK, "PCI: XmPciLpEvent.c: intReceived\n"); -#endif - - switch (eventParm->hvLpEvent.xSubtype) { - case XmPciLpEvent_SlotInterrupt: - irq = eventParm->hvLpEvent.xCorrelationToken; - /* Dispatch the interrupt handlers for this irq */ - ppc_irq_dispatch_handler(regsParm, irq); - HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber, - eventParm->eventData.slotInterrupt.subBusNumber, - eventParm->eventData.slotInterrupt.deviceId); - break; - /* Ignore error recovery events for now */ - case XmPciLpEvent_BusCreated: - printk(KERN_INFO "XmPciLpEvent.c: system bus %d created\n", - eventParm->eventData.busCreated.busNumber); - break; - case XmPciLpEvent_BusError: - case XmPciLpEvent_BusFailed: - printk(KERN_INFO "XmPciLpEvent.c: system bus %d failed\n", - eventParm->eventData.busFailed.busNumber); - break; - case XmPciLpEvent_BusRecovered: - case XmPciLpEvent_UnQuiesceBus: - printk(KERN_INFO "XmPciLpEvent.c: system bus %d recovered\n", - eventParm->eventData.busRecovered.busNumber); - break; - case XmPciLpEvent_NodeFailed: - case XmPciLpEvent_BridgeError: - printk(KERN_INFO - "XmPciLpEvent.c: multi-adapter bridge %d/%d/%d failed\n", - eventParm->eventData.nodeFailed.busNumber, - eventParm->eventData.nodeFailed.subBusNumber, - eventParm->eventData.nodeFailed.deviceId); - break; - case XmPciLpEvent_NodeRecovered: - printk(KERN_INFO - "XmPciLpEvent.c: multi-adapter bridge %d/%d/%d recovered\n", - eventParm->eventData.nodeRecovered.busNumber, - eventParm->eventData.nodeRecovered.subBusNumber, - eventParm->eventData.nodeRecovered.deviceId); - break; - default: - printk(KERN_ERR - "XmPciLpEvent.c: unrecognized event subtype 0x%x\n", - eventParm->hvLpEvent.xSubtype); - break; - } -} - - -/* This should be called sometime prior to buswalk (init_IRQ would be good) */ -int XmPciLpEvent_init() -{ - int xRc; - - PPCDBG(PPCDBG_BUSWALK, - "XmPciLpEvent_init, Register Event type 0x%04X\n", - HvLpEvent_Type_PciIo); - - xRc = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo, - &XmPciLpEvent_handler); - if (xRc == 0) { - xRc = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0); - if (xRc != 0) - printk(KERN_ERR - "XmPciLpEvent.c: open event path failed with rc 0x%x\n", - xRc); - } else - printk(KERN_ERR - "XmPciLpEvent.c: register handler failed with rc 0x%x\n", - xRc); - return xRc; -} diff --git a/arch/ppc64/kernel/asm-offsets.c b/arch/ppc64/kernel/asm-offsets.c index 0094ac79a18..abb9e5b5da0 100644 --- a/arch/ppc64/kernel/asm-offsets.c +++ b/arch/ppc64/kernel/asm-offsets.c @@ -31,7 +31,6 @@ #include <asm/paca.h> #include <asm/lppaca.h> -#include <asm/iSeries/ItLpQueue.h> #include <asm/iSeries/HvLpEvent.h> #include <asm/rtas.h> #include <asm/cputable.h> diff --git a/arch/ppc64/kernel/dma.c b/arch/ppc64/kernel/dma.c index ce714c92713..4da8e31b2b6 100644 --- a/arch/ppc64/kernel/dma.c +++ b/arch/ppc64/kernel/dma.c @@ -15,8 +15,10 @@ static struct dma_mapping_ops *get_dma_ops(struct device *dev) { +#ifdef CONFIG_PCI if (dev->bus == &pci_bus_type) return &pci_dma_ops; +#endif #ifdef CONFIG_IBMVIO if (dev->bus == &vio_bus_type) return &vio_dma_ops; @@ -37,8 +39,10 @@ EXPORT_SYMBOL(dma_supported); int dma_set_mask(struct device *dev, u64 dma_mask) { +#ifdef CONFIG_PCI if (dev->bus == &pci_bus_type) return pci_set_dma_mask(to_pci_dev(dev), dma_mask); +#endif #ifdef CONFIG_IBMVIO if (dev->bus == &vio_bus_type) return -EIO; diff --git a/arch/ppc64/kernel/eeh.c b/arch/ppc64/kernel/eeh.c index d63d41f3eec..af5272fedad 100644 --- a/arch/ppc64/kernel/eeh.c +++ b/arch/ppc64/kernel/eeh.c @@ -505,7 +505,7 @@ static inline unsigned long eeh_token_to_phys(unsigned long token) pte_t *ptep; unsigned long pa; - ptep = find_linux_pte(ioremap_mm.pgd, token); + ptep = find_linux_pte(init_mm.pgd, token); if (!ptep) return token; pa = pte_pfn(*ptep) << PAGE_SHIFT; diff --git a/arch/ppc64/kernel/entry.S b/arch/ppc64/kernel/entry.S index d3604056e1a..b61572eb2a7 100644 --- a/arch/ppc64/kernel/entry.S +++ b/arch/ppc64/kernel/entry.S @@ -436,15 +436,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) REST_8GPRS(14, r1) REST_10GPRS(22, r1) -#ifdef CONFIG_PPC_ISERIES - clrrdi r7,r1,THREAD_SHIFT /* get current_thread_info() */ - ld r7,TI_FLAGS(r7) /* Get run light flag */ - mfspr r9,CTRLF - srdi r7,r7,TIF_RUN_LIGHT - insrdi r9,r7,1,63 /* Insert run light into CTRL */ - mtspr CTRLT,r9 -#endif - /* convert old thread to its task_struct for return value */ addi r3,r3,-THREAD ld r7,_NIP(r1) /* Return to _switch caller in new task */ diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S index 92a744c31ab..02c8f4e3e4b 100644 --- a/arch/ppc64/kernel/head.S +++ b/arch/ppc64/kernel/head.S @@ -626,10 +626,10 @@ system_reset_iSeries: lhz r24,PACAPACAINDEX(r13) /* Get processor # */ cmpwi 0,r24,0 /* Are we processor 0? */ beq .__start_initialization_iSeries /* Start up the first processor */ - mfspr r4,CTRLF - li r5,RUNLATCH /* Turn off the run light */ + mfspr r4,SPRN_CTRLF + li r5,CTRL_RUNLATCH /* Turn off the run light */ andc r4,r4,r5 - mtspr CTRLT,r4 + mtspr SPRN_CTRLT,r4 1: HMT_LOW @@ -2082,9 +2082,9 @@ _GLOBAL(hmt_start_secondary) mfspr r4, HID0 ori r4, r4, 0x1 mtspr HID0, r4 - mfspr r4, CTRLF + mfspr r4, SPRN_CTRLF oris r4, r4, 0x40 - mtspr CTRLT, r4 + mtspr SPRN_CTRLT, r4 blr #endif @@ -2121,10 +2121,6 @@ empty_zero_page: swapper_pg_dir: .space 4096 - .globl ioremap_dir -ioremap_dir: - .space 4096 - #ifdef CONFIG_SMP /* 1 page segment table per cpu (max 48, cpu0 allocated at STAB0_PHYS_ADDR) */ .globl stab_array diff --git a/arch/ppc64/kernel/iSeries_VpdInfo.c b/arch/ppc64/kernel/iSeries_VpdInfo.c index a6f0ff2d023..d11c732daf8 100644 --- a/arch/ppc64/kernel/iSeries_VpdInfo.c +++ b/arch/ppc64/kernel/iSeries_VpdInfo.c @@ -1,31 +1,31 @@ -/************************************************************************/ -/* File iSeries_vpdInfo.c created by Allan Trautman on Fri Feb 2 2001. */ -/************************************************************************/ -/* This code gets the card location of the hardware */ -/* Copyright (C) 20yy <Allan H Trautman> <IBM Corp> */ -/* */ -/* This program is free software; you can redistribute it and/or modify */ -/* it under the terms of the GNU General Public License as published by */ -/* the Free Software Foundation; either version 2 of the License, or */ -/* (at your option) any later version. */ -/* */ -/* This program is distributed in the hope that it will be useful, */ -/* but WITHOUT ANY WARRANTY; without even the implied warranty of */ -/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the */ -/* GNU General Public License for more details. */ -/* */ -/* You should have received a copy of the GNU General Public License */ -/* along with this program; if not, write to the: */ -/* Free Software Foundation, Inc., */ -/* 59 Temple Place, Suite 330, */ -/* Boston, MA 02111-1307 USA */ -/************************************************************************/ -/* Change Activity: */ -/* Created, Feb 2, 2001 */ -/* Ported to ppc64, August 20, 2001 */ -/* End Change Activity */ -/************************************************************************/ -#include <linux/config.h> +/* + * File iSeries_vpdInfo.c created by Allan Trautman on Fri Feb 2 2001. + * + * This code gets the card location of the hardware + * Copyright (C) 2001 <Allan H Trautman> <IBM Corp> + * Copyright (C) 2005 Stephen Rothwel, IBM Corp + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the: + * Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, + * Boston, MA 02111-1307 USA + * + * Change Activity: + * Created, Feb 2, 2001 + * Ported to ppc64, August 20, 2001 + * End Change Activity + */ #include <linux/init.h> #include <linux/module.h> #include <linux/pci.h> @@ -34,30 +34,25 @@ #include <asm/iSeries/HvCallPci.h> #include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/mf.h> -#include <asm/iSeries/LparData.h> #include <asm/iSeries/iSeries_pci.h> -#include "pci.h" /* * Size of Bus VPD data */ #define BUS_VPDSIZE 1024 + /* * Bus Vpd Tags */ -#define VpdEndOfDataTag 0x78 #define VpdEndOfAreaTag 0x79 #define VpdIdStringTag 0x82 #define VpdVendorAreaTag 0x84 + /* * Mfg Area Tags */ -#define VpdFruFlag 0x4647 // "FG" #define VpdFruFrameId 0x4649 // "FI" #define VpdSlotMapFormat 0x4D46 // "MF" -#define VpdAsmPartNumber 0x504E // "PN" -#define VpdFruSerial 0x534E // "SN" #define VpdSlotMap 0x534D // "SM" /* @@ -79,74 +74,33 @@ struct SlotMapStruct { char CardLocation[3]; char Parms[8]; char Reserved[2]; -}; +}; typedef struct SlotMapStruct SlotMap; #define SLOT_ENTRY_SIZE 16 /* - * Formats the device information. - * - Pass in pci_dev* pointer to the device. - * - Pass in buffer to place the data. Danger here is the buffer must - * be as big as the client says it is. Should be at least 128 bytes. - * Return will the length of the string data put in the buffer. - * Format: - * PCI: Bus 0, Device 26, Vendor 0x12AE Frame 1, Card C10 Ethernet - * controller - */ -int iSeries_Device_Information(struct pci_dev *PciDev, char *buffer, - int BufferSize) -{ - struct iSeries_Device_Node *DevNode = - (struct iSeries_Device_Node *)PciDev->sysdata; - int len; - - if (DevNode == NULL) - return sprintf(buffer, - "PCI: iSeries_Device_Information DevNode is NULL"); - - if (BufferSize < 128) - return 0; - - len = sprintf(buffer, "PCI: Bus%3d, Device%3d, Vendor %04X ", - ISERIES_BUS(DevNode), PCI_SLOT(PciDev->devfn), - PciDev->vendor); - len += sprintf(buffer + len, "Frame%3d, Card %4s ", - DevNode->FrameId, DevNode->CardLocation); -#ifdef CONFIG_PCI - if (pci_class_name(PciDev->class >> 8) == 0) - len += sprintf(buffer + len, "0x%04X ", - (int)(PciDev->class >> 8)); - else - len += sprintf(buffer + len, "%s", - pci_class_name(PciDev->class >> 8)); -#endif - return len; -} - -/* * Parse the Slot Area */ -void iSeries_Parse_SlotArea(SlotMap *MapPtr, int MapLen, - struct iSeries_Device_Node *DevNode) +static void __init iSeries_Parse_SlotArea(SlotMap *MapPtr, int MapLen, + HvAgentId agent, u8 *PhbId, char card[4]) { int SlotMapLen = MapLen; SlotMap *SlotMapPtr = MapPtr; /* - * Parse Slot label until we find the one requrested + * Parse Slot label until we find the one requested */ while (SlotMapLen > 0) { - if (SlotMapPtr->AgentId == DevNode->AgentId ) { + if (SlotMapPtr->AgentId == agent) { /* * If Phb wasn't found, grab the entry first one found. */ - if (DevNode->PhbId == 0xff) - DevNode->PhbId = SlotMapPtr->PhbId; + if (*PhbId == 0xff) + *PhbId = SlotMapPtr->PhbId; /* Found it, extract the data. */ - if (SlotMapPtr->PhbId == DevNode->PhbId ) { - memcpy(&DevNode->CardLocation, - &SlotMapPtr->CardLocation, 3); - DevNode->CardLocation[3] = 0; + if (SlotMapPtr->PhbId == *PhbId) { + memcpy(card, &SlotMapPtr->CardLocation, 3); + card[3] = 0; break; } } @@ -159,8 +113,9 @@ void iSeries_Parse_SlotArea(SlotMap *MapPtr, int MapLen, /* * Parse the Mfg Area */ -static void iSeries_Parse_MfgArea(u8 *AreaData, int AreaLen, - struct iSeries_Device_Node *DevNode) +static void __init iSeries_Parse_MfgArea(u8 *AreaData, int AreaLen, + HvAgentId agent, u8 *PhbId, + u8 *frame, char card[4]) { MfgArea *MfgAreaPtr = (MfgArea *)AreaData; int MfgAreaLen = AreaLen; @@ -171,7 +126,7 @@ static void iSeries_Parse_MfgArea(u8 *AreaData, int AreaLen, int MfgTagLen = MfgAreaPtr->TagLength; /* Frame ID (FI 4649020310 ) */ if (MfgAreaPtr->Tag == VpdFruFrameId) /* FI */ - DevNode->FrameId = MfgAreaPtr->AreaData1; + *frame = MfgAreaPtr->AreaData1; /* Slot Map Format (MF 4D46020004 ) */ else if (MfgAreaPtr->Tag == VpdSlotMapFormat) /* MF */ SlotMapFmt = (MfgAreaPtr->AreaData1 * 256) @@ -183,10 +138,11 @@ static void iSeries_Parse_MfgArea(u8 *AreaData, int AreaLen, if (SlotMapFmt == 0x1004) SlotMapPtr = (SlotMap *)((char *)MfgAreaPtr + MFG_ENTRY_SIZE + 1); - else + else SlotMapPtr = (SlotMap *)((char *)MfgAreaPtr + MFG_ENTRY_SIZE); - iSeries_Parse_SlotArea(SlotMapPtr, MfgTagLen, DevNode); + iSeries_Parse_SlotArea(SlotMapPtr, MfgTagLen, + agent, PhbId, card); } /* * Point to the next Mfg Area @@ -194,19 +150,19 @@ static void iSeries_Parse_MfgArea(u8 *AreaData, int AreaLen, */ MfgAreaPtr = (MfgArea *)((char *)MfgAreaPtr + MfgTagLen + MFG_ENTRY_SIZE); - MfgAreaLen -= (MfgTagLen + MFG_ENTRY_SIZE); - } + MfgAreaLen -= (MfgTagLen + MFG_ENTRY_SIZE); + } } /* * Look for "BUS".. Data is not Null terminated. * PHBID of 0xFF indicates PHB was not found in VPD Data. */ -static int iSeries_Parse_PhbId(u8 *AreaPtr, int AreaLength) +static int __init iSeries_Parse_PhbId(u8 *AreaPtr, int AreaLength) { u8 *PhbPtr = AreaPtr; int DataLen = AreaLength; - char PhbId = 0xFF; + char PhbId = 0xFF; while (DataLen > 0) { if ((*PhbPtr == 'B') && (*(PhbPtr + 1) == 'U') @@ -216,7 +172,7 @@ static int iSeries_Parse_PhbId(u8 *AreaPtr, int AreaLength) ++PhbPtr; PhbId = (*PhbPtr & 0x0F); break; - } + } ++PhbPtr; --DataLen; } @@ -226,52 +182,90 @@ static int iSeries_Parse_PhbId(u8 *AreaPtr, int AreaLength) /* * Parse out the VPD Areas */ -static void iSeries_Parse_Vpd(u8 *VpdData, int VpdDataLen, - struct iSeries_Device_Node *DevNode) +static void __init iSeries_Parse_Vpd(u8 *VpdData, int VpdDataLen, + HvAgentId agent, u8 *frame, char card[4]) { u8 *TagPtr = VpdData; int DataLen = VpdDataLen - 3; + u8 PhbId; while ((*TagPtr != VpdEndOfAreaTag) && (DataLen > 0)) { - int AreaLen = *(TagPtr + 1) + (*(TagPtr + 2) * 256); + int AreaLen = *(TagPtr + 1) + (*(TagPtr + 2) * 256); u8 *AreaData = TagPtr + 3; if (*TagPtr == VpdIdStringTag) - DevNode->PhbId = iSeries_Parse_PhbId(AreaData, AreaLen); + PhbId = iSeries_Parse_PhbId(AreaData, AreaLen); else if (*TagPtr == VpdVendorAreaTag) - iSeries_Parse_MfgArea(AreaData, AreaLen, DevNode); + iSeries_Parse_MfgArea(AreaData, AreaLen, + agent, &PhbId, frame, card); /* Point to next Area. */ TagPtr = AreaData + AreaLen; DataLen -= AreaLen; } -} +} -void iSeries_Get_Location_Code(struct iSeries_Device_Node *DevNode) +static void __init iSeries_Get_Location_Code(u16 bus, HvAgentId agent, + u8 *frame, char card[4]) { int BusVpdLen = 0; - u8 *BusVpdPtr = (u8 *)kmalloc(BUS_VPDSIZE, GFP_KERNEL); + u8 *BusVpdPtr = kmalloc(BUS_VPDSIZE, GFP_KERNEL); if (BusVpdPtr == NULL) { printk("PCI: Bus VPD Buffer allocation failure.\n"); return; } - BusVpdLen = HvCallPci_getBusVpd(ISERIES_BUS(DevNode), - ISERIES_HV_ADDR(BusVpdPtr), + BusVpdLen = HvCallPci_getBusVpd(bus, ISERIES_HV_ADDR(BusVpdPtr), BUS_VPDSIZE); if (BusVpdLen == 0) { - kfree(BusVpdPtr); printk("PCI: Bus VPD Buffer zero length.\n"); - return; + goto out_free; } /* printk("PCI: BusVpdPtr: %p, %d\n",BusVpdPtr, BusVpdLen); */ /* Make sure this is what I think it is */ if (*BusVpdPtr != VpdIdStringTag) { /* 0x82 */ printk("PCI: Bus VPD Buffer missing starting tag.\n"); - kfree(BusVpdPtr); - return; + goto out_free; } - iSeries_Parse_Vpd(BusVpdPtr,BusVpdLen, DevNode); - sprintf(DevNode->Location, "Frame%3d, Card %-4s", DevNode->FrameId, - DevNode->CardLocation); + iSeries_Parse_Vpd(BusVpdPtr, BusVpdLen, agent, frame, card); +out_free: kfree(BusVpdPtr); } + +/* + * Prints the device information. + * - Pass in pci_dev* pointer to the device. + * - Pass in the device count + * + * Format: + * PCI: Bus 0, Device 26, Vendor 0x12AE Frame 1, Card C10 Ethernet + * controller + */ +void __init iSeries_Device_Information(struct pci_dev *PciDev, int count) +{ + struct iSeries_Device_Node *DevNode = PciDev->sysdata; + u16 bus; + u8 frame; + char card[4]; + HvSubBusNumber subbus; + HvAgentId agent; + + if (DevNode == NULL) { + printk("%d. PCI: iSeries_Device_Information DevNode is NULL\n", + count); + return; + } + + bus = ISERIES_BUS(DevNode); + subbus = ISERIES_SUBBUS(DevNode); + agent = ISERIES_PCI_AGENTID(ISERIES_GET_DEVICE_FROM_SUBBUS(subbus), + ISERIES_GET_FUNCTION_FROM_SUBBUS(subbus)); + iSeries_Get_Location_Code(bus, agent, &frame, card); + + printk("%d. PCI: Bus%3d, Device%3d, Vendor %04X Frame%3d, Card %4s ", + count, bus, PCI_SLOT(PciDev->devfn), PciDev->vendor, + frame, card); + if (pci_class_name(PciDev->class >> 8) == 0) + printk("0x%04X\n", (int)(PciDev->class >> 8)); + else + printk("%s\n", pci_class_name(PciDev->class >> 8)); +} diff --git a/arch/ppc64/kernel/iSeries_iommu.c b/arch/ppc64/kernel/iSeries_iommu.c index 4e1a47c8a80..f8ff1bb054d 100644 --- a/arch/ppc64/kernel/iSeries_iommu.c +++ b/arch/ppc64/kernel/iSeries_iommu.c @@ -83,7 +83,7 @@ static void tce_free_iSeries(struct iommu_table *tbl, long index, long npages) } } - +#ifdef CONFIG_PCI /* * This function compares the known tables to find an iommu_table * that has already been built for hardware TCEs. @@ -159,6 +159,7 @@ void iommu_devnode_init_iSeries(struct iSeries_Device_Node *dn) else kfree(tbl); } +#endif static void iommu_dev_setup_iSeries(struct pci_dev *dev) { } static void iommu_bus_setup_iSeries(struct pci_bus *bus) { } diff --git a/arch/ppc64/kernel/iSeries_irq.c b/arch/ppc64/kernel/iSeries_irq.c index f831d259dbb..77376c1bd61 100644 --- a/arch/ppc64/kernel/iSeries_irq.c +++ b/arch/ppc64/kernel/iSeries_irq.c @@ -1,27 +1,29 @@ -/************************************************************************/ -/* This module supports the iSeries PCI bus interrupt handling */ -/* Copyright (C) 20yy <Robert L Holtorf> <IBM Corp> */ -/* */ -/* This program is free software; you can redistribute it and/or modify */ -/* it under the terms of the GNU General Public License as published by */ -/* the Free Software Foundation; either version 2 of the License, or */ -/* (at your option) any later version. */ -/* */ -/* This program is distributed in the hope that it will be useful, */ -/* but WITHOUT ANY WARRANTY; without even the implied warranty of */ -/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the */ -/* GNU General Public License for more details. */ -/* */ -/* You should have received a copy of the GNU General Public License */ -/* along with this program; if not, write to the: */ -/* Free Software Foundation, Inc., */ -/* 59 Temple Place, Suite 330, */ -/* Boston, MA 02111-1307 USA */ -/************************************************************************/ -/* Change Activity: */ -/* Created, December 13, 2000 by Wayne Holm */ -/* End Change Activity */ -/************************************************************************/ +/* + * This module supports the iSeries PCI bus interrupt handling + * Copyright (C) 20yy <Robert L Holtorf> <IBM Corp> + * Copyright (C) 2004-2005 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the: + * Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, + * Boston, MA 02111-1307 USA + * + * Change Activity: + * Created, December 13, 2000 by Wayne Holm + * End Change Activity + */ +#include <linux/config.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/threads.h> @@ -30,30 +32,15 @@ #include <linux/string.h> #include <linux/bootmem.h> #include <linux/ide.h> - #include <linux/irq.h> #include <linux/spinlock.h> -#include <asm/ppcdebug.h> +#include <asm/ppcdebug.h> +#include <asm/iSeries/HvTypes.h> +#include <asm/iSeries/HvLpEvent.h> #include <asm/iSeries/HvCallPci.h> #include <asm/iSeries/HvCallXm.h> #include <asm/iSeries/iSeries_irq.h> -#include <asm/iSeries/XmPciLpEvent.h> - -static unsigned int iSeries_startup_IRQ(unsigned int irq); -static void iSeries_shutdown_IRQ(unsigned int irq); -static void iSeries_enable_IRQ(unsigned int irq); -static void iSeries_disable_IRQ(unsigned int irq); -static void iSeries_end_IRQ(unsigned int irq); - -static hw_irq_controller iSeries_IRQ_handler = { - .typename = "iSeries irq controller", - .startup = iSeries_startup_IRQ, - .shutdown = iSeries_shutdown_IRQ, - .enable = iSeries_enable_IRQ, - .disable = iSeries_disable_IRQ, - .end = iSeries_end_IRQ -}; /* This maps virtual irq numbers to real irqs */ unsigned int virt_irq_to_real_map[NR_IRQS]; @@ -62,37 +49,187 @@ unsigned int virt_irq_to_real_map[NR_IRQS]; /* Note: the pcnet32 driver assumes irq numbers < 2 aren't valid. :( */ static int next_virtual_irq = 2; -/* This is called by init_IRQ. set in ppc_md.init_IRQ by iSeries_setup.c */ -void __init iSeries_init_IRQ(void) +static long Pci_Interrupt_Count; +static long Pci_Event_Count; + +enum XmPciLpEvent_Subtype { + XmPciLpEvent_BusCreated = 0, // PHB has been created + XmPciLpEvent_BusError = 1, // PHB has failed + XmPciLpEvent_BusFailed = 2, // Msg to Secondary, Primary failed bus + XmPciLpEvent_NodeFailed = 4, // Multi-adapter bridge has failed + XmPciLpEvent_NodeRecovered = 5, // Multi-adapter bridge has recovered + XmPciLpEvent_BusRecovered = 12, // PHB has been recovered + XmPciLpEvent_UnQuiesceBus = 18, // Secondary bus unqiescing + XmPciLpEvent_BridgeError = 21, // Bridge Error + XmPciLpEvent_SlotInterrupt = 22 // Slot interrupt +}; + +struct XmPciLpEvent_BusInterrupt { + HvBusNumber busNumber; + HvSubBusNumber subBusNumber; +}; + +struct XmPciLpEvent_NodeInterrupt { + HvBusNumber busNumber; + HvSubBusNumber subBusNumber; + HvAgentId deviceId; +}; + +struct XmPciLpEvent { + struct HvLpEvent hvLpEvent; + + union { + u64 alignData; // Align on an 8-byte boundary + + struct { + u32 fisr; + HvBusNumber busNumber; + HvSubBusNumber subBusNumber; + HvAgentId deviceId; + } slotInterrupt; + + struct XmPciLpEvent_BusInterrupt busFailed; + struct XmPciLpEvent_BusInterrupt busRecovered; + struct XmPciLpEvent_BusInterrupt busCreated; + + struct XmPciLpEvent_NodeInterrupt nodeFailed; + struct XmPciLpEvent_NodeInterrupt nodeRecovered; + + } eventData; + +}; + +static void intReceived(struct XmPciLpEvent *eventParm, + struct pt_regs *regsParm) { - /* Register PCI event handler and open an event path */ - XmPciLpEvent_init(); + int irq; + + ++Pci_Interrupt_Count; + + switch (eventParm->hvLpEvent.xSubtype) { + case XmPciLpEvent_SlotInterrupt: + irq = eventParm->hvLpEvent.xCorrelationToken; + /* Dispatch the interrupt handlers for this irq */ + ppc_irq_dispatch_handler(regsParm, irq); + HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber, + eventParm->eventData.slotInterrupt.subBusNumber, + eventParm->eventData.slotInterrupt.deviceId); + break; + /* Ignore error recovery events for now */ + case XmPciLpEvent_BusCreated: + printk(KERN_INFO "intReceived: system bus %d created\n", + eventParm->eventData.busCreated.busNumber); + break; + case XmPciLpEvent_BusError: + case XmPciLpEvent_BusFailed: + printk(KERN_INFO "intReceived: system bus %d failed\n", + eventParm->eventData.busFailed.busNumber); + break; + case XmPciLpEvent_BusRecovered: + case XmPciLpEvent_UnQuiesceBus: + printk(KERN_INFO "intReceived: system bus %d recovered\n", + eventParm->eventData.busRecovered.busNumber); + break; + case XmPciLpEvent_NodeFailed: + case XmPciLpEvent_BridgeError: + printk(KERN_INFO + "intReceived: multi-adapter bridge %d/%d/%d failed\n", + eventParm->eventData.nodeFailed.busNumber, + eventParm->eventData.nodeFailed.subBusNumber, + eventParm->eventData.nodeFailed.deviceId); + break; + case XmPciLpEvent_NodeRecovered: + printk(KERN_INFO + "intReceived: multi-adapter bridge %d/%d/%d recovered\n", + eventParm->eventData.nodeRecovered.busNumber, + eventParm->eventData.nodeRecovered.subBusNumber, + eventParm->eventData.nodeRecovered.deviceId); + break; + default: + printk(KERN_ERR + "intReceived: unrecognized event subtype 0x%x\n", + eventParm->hvLpEvent.xSubtype); + break; + } +} + +static void XmPciLpEvent_handler(struct HvLpEvent *eventParm, + struct pt_regs *regsParm) +{ +#ifdef CONFIG_PCI + ++Pci_Event_Count; + + if (eventParm && (eventParm->xType == HvLpEvent_Type_PciIo)) { + switch (eventParm->xFlags.xFunction) { + case HvLpEvent_Function_Int: + intReceived((struct XmPciLpEvent *)eventParm, regsParm); + break; + case HvLpEvent_Function_Ack: + printk(KERN_ERR + "XmPciLpEvent_handler: unexpected ack received\n"); + break; + default: + printk(KERN_ERR + "XmPciLpEvent_handler: unexpected event function %d\n", + (int)eventParm->xFlags.xFunction); + break; + } + } else if (eventParm) + printk(KERN_ERR + "XmPciLpEvent_handler: Unrecognized PCI event type 0x%x\n", + (int)eventParm->xType); + else + printk(KERN_ERR "XmPciLpEvent_handler: NULL event received\n"); +#endif } /* - * This is called out of iSeries_scan_slot to allocate an IRQ for an EADS slot - * It calculates the irq value for the slot. - * Note that subBusNumber is always 0 (at the moment at least). + * This is called by init_IRQ. set in ppc_md.init_IRQ by iSeries_setup.c + * It must be called before the bus walk. */ -int __init iSeries_allocate_IRQ(HvBusNumber busNumber, - HvSubBusNumber subBusNumber, HvAgentId deviceId) +void __init iSeries_init_IRQ(void) { - unsigned int realirq, virtirq; - u8 idsel = (deviceId >> 4); - u8 function = deviceId & 7; - - virtirq = next_virtual_irq++; - realirq = ((busNumber - 1) << 6) + ((idsel - 1) << 3) + function; - virt_irq_to_real_map[virtirq] = realirq; + /* Register PCI event handler and open an event path */ + int xRc; - irq_desc[virtirq].handler = &iSeries_IRQ_handler; - return virtirq; + xRc = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo, + &XmPciLpEvent_handler); + if (xRc == 0) { + xRc = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0); + if (xRc != 0) + printk(KERN_ERR "iSeries_init_IRQ: open event path " + "failed with rc 0x%x\n", xRc); + } else + printk(KERN_ERR "iSeries_init_IRQ: register handler " + "failed with rc 0x%x\n", xRc); } #define REAL_IRQ_TO_BUS(irq) ((((irq) >> 6) & 0xff) + 1) #define REAL_IRQ_TO_IDSEL(irq) ((((irq) >> 3) & 7) + 1) #define REAL_IRQ_TO_FUNC(irq) ((irq) & 7) +/* + * This will be called by device drivers (via enable_IRQ) + * to enable INTA in the bridge interrupt status register. + */ +static void iSeries_enable_IRQ(unsigned int irq) +{ + u32 bus, deviceId, function, mask; + const u32 subBus = 0; + unsigned int rirq = virt_irq_to_real_map[irq]; + + /* The IRQ has already been locked by the caller */ + bus = REAL_IRQ_TO_BUS(rirq); + function = REAL_IRQ_TO_FUNC(rirq); + deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; + + /* Unmask secondary INTA */ + mask = 0x80000000; + HvCallPci_unmaskInterrupts(bus, subBus, deviceId, mask); + PPCDBG(PPCDBG_BUSWALK, "iSeries_enable_IRQ 0x%02X.%02X.%02X 0x%04X\n", + bus, subBus, deviceId, irq); +} + /* This is called by iSeries_activate_IRQs */ static unsigned int iSeries_startup_IRQ(unsigned int irq) { @@ -131,7 +268,7 @@ void __init iSeries_activate_IRQs() desc->handler->startup(irq); spin_unlock_irqrestore(&desc->lock, flags); } - } + } } /* this is not called anywhere currently */ @@ -173,29 +310,7 @@ static void iSeries_disable_IRQ(unsigned int irq) mask = 0x80000000; HvCallPci_maskInterrupts(bus, subBus, deviceId, mask); PPCDBG(PPCDBG_BUSWALK, "iSeries_disable_IRQ 0x%02X.%02X.%02X 0x%04X\n", - bus, subBus, deviceId, irq); -} - -/* - * This will be called by device drivers (via enable_IRQ) - * to enable INTA in the bridge interrupt status register. - */ -static void iSeries_enable_IRQ(unsigned int irq) -{ - u32 bus, deviceId, function, mask; - const u32 subBus = 0; - unsigned int rirq = virt_irq_to_real_map[irq]; - - /* The IRQ has already been locked by the caller */ - bus = REAL_IRQ_TO_BUS(rirq); - function = REAL_IRQ_TO_FUNC(rirq); - deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; - - /* Unmask secondary INTA */ - mask = 0x80000000; - HvCallPci_unmaskInterrupts(bus, subBus, deviceId, mask); - PPCDBG(PPCDBG_BUSWALK, "iSeries_enable_IRQ 0x%02X.%02X.%02X 0x%04X\n", - bus, subBus, deviceId, irq); + bus, subBus, deviceId, irq); } /* @@ -207,3 +322,32 @@ static void iSeries_enable_IRQ(unsigned int irq) static void iSeries_end_IRQ(unsigned int irq) { } + +static hw_irq_controller iSeries_IRQ_handler = { + .typename = "iSeries irq controller", + .startup = iSeries_startup_IRQ, + .shutdown = iSeries_shutdown_IRQ, + .enable = iSeries_enable_IRQ, + .disable = iSeries_disable_IRQ, + .end = iSeries_end_IRQ +}; + +/* + * This is called out of iSeries_scan_slot to allocate an IRQ for an EADS slot + * It calculates the irq value for the slot. + * Note that subBusNumber is always 0 (at the moment at least). + */ +int __init iSeries_allocate_IRQ(HvBusNumber busNumber, + HvSubBusNumber subBusNumber, HvAgentId deviceId) +{ + unsigned int realirq, virtirq; + u8 idsel = (deviceId >> 4); + u8 function = deviceId & 7; + + virtirq = next_virtual_irq++; + realirq = ((busNumber - 1) << 6) + ((idsel - 1) << 3) + function; + virt_irq_to_real_map[virtirq] = realirq; + + irq_desc[virtirq].handler = &iSeries_IRQ_handler; + return virtirq; +} diff --git a/arch/ppc64/kernel/iSeries_pci.c b/arch/ppc64/kernel/iSeries_pci.c index bd4c2554f1a..356e4fd9a94 100644 --- a/arch/ppc64/kernel/iSeries_pci.c +++ b/arch/ppc64/kernel/iSeries_pci.c @@ -38,9 +38,7 @@ #include <asm/iommu.h> #include <asm/iSeries/HvCallPci.h> -#include <asm/iSeries/HvCallSm.h> #include <asm/iSeries/HvCallXm.h> -#include <asm/iSeries/LparData.h> #include <asm/iSeries/iSeries_irq.h> #include <asm/iSeries/iSeries_pci.h> #include <asm/iSeries/mf.h> @@ -225,10 +223,7 @@ static struct iSeries_Device_Node *build_device_node(HvBusNumber Bus, node->DsaAddr.Dsa.busNumber = Bus; node->DsaAddr.Dsa.subBusNumber = SubBus; node->DsaAddr.Dsa.deviceId = 0x10; - node->AgentId = AgentId; node->DevFn = PCI_DEVFN(ISERIES_ENCODE_DEVICE(AgentId), Function); - node->IoRetry = 0; - iSeries_Get_Location_Code(node); return node; } @@ -302,7 +297,6 @@ void __init iSeries_pci_final_fixup(void) { struct pci_dev *pdev = NULL; struct iSeries_Device_Node *node; - char Buffer[256]; int DeviceCount = 0; PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_fixup Entry.\n"); @@ -324,9 +318,7 @@ void __init iSeries_pci_final_fixup(void) "pdev 0x%p <==> DevNode 0x%p\n", pdev, node); allocate_device_bars(pdev); - iSeries_Device_Information(pdev, Buffer, - sizeof(Buffer)); - printk("%d. %s\n", DeviceCount, Buffer); + iSeries_Device_Information(pdev, DeviceCount); iommu_devnode_init_iSeries(node); } else printk("PCI: Device Tree not found for 0x%016lX\n", @@ -499,7 +491,6 @@ static int scan_bridge_slot(HvBusNumber Bus, ++DeviceCount; node = build_device_node(Bus, SubBus, EADsIdSel, Function); - node->Vendor = VendorId; node->Irq = Irq; node->LogicalSlot = BridgeInfo->logicalSlotNumber; @@ -661,38 +652,34 @@ static struct pci_ops iSeries_pci_ops = { * Check Return Code * -> On Failure, print and log information. * Increment Retry Count, if exceeds max, panic partition. - * -> If in retry, print and log success * * PCI: Device 23.90 ReadL I/O Error( 0): 0x1234 * PCI: Device 23.90 ReadL Retry( 1) * PCI: Device 23.90 ReadL Retry Successful(1) */ static int CheckReturnCode(char *TextHdr, struct iSeries_Device_Node *DevNode, - u64 ret) + int *retry, u64 ret) { if (ret != 0) { ++Pci_Error_Count; - ++DevNode->IoRetry; + (*retry)++; printk("PCI: %s: Device 0x%04X:%02X I/O Error(%2d): 0x%04X\n", TextHdr, DevNode->DsaAddr.Dsa.busNumber, DevNode->DevFn, - DevNode->IoRetry, (int)ret); + *retry, (int)ret); /* * Bump the retry and check for retry count exceeded. * If, Exceeded, panic the system. */ - if ((DevNode->IoRetry > Pci_Retry_Max) && + if (((*retry) > Pci_Retry_Max) && (Pci_Error_Flag > 0)) { mf_display_src(0xB6000103); - panic_timeout = 0; + panic_timeout = 0; panic("PCI: Hardware I/O Error, SRC B6000103, " "Automatic Reboot Disabled.\n"); } return -1; /* Retry Try */ } - /* If retry was in progress, log success and rest retry count */ - if (DevNode->IoRetry > 0) - DevNode->IoRetry = 0; - return 0; + return 0; } /* @@ -738,6 +725,7 @@ u8 iSeries_Read_Byte(const volatile void __iomem *IoAddress) { u64 BarOffset; u64 dsa; + int retry = 0; struct HvCallPci_LoadReturn ret; struct iSeries_Device_Node *DevNode = xlate_iomm_address(IoAddress, &dsa, &BarOffset); @@ -757,7 +745,7 @@ u8 iSeries_Read_Byte(const volatile void __iomem *IoAddress) do { ++Pci_Io_Read_Count; HvCall3Ret16(HvCallPciBarLoad8, &ret, dsa, BarOffset, 0); - } while (CheckReturnCode("RDB", DevNode, ret.rc) != 0); + } while (CheckReturnCode("RDB", DevNode, &retry, ret.rc) != 0); return (u8)ret.value; } @@ -767,6 +755,7 @@ u16 iSeries_Read_Word(const volatile void __iomem *IoAddress) { u64 BarOffset; u64 dsa; + int retry = 0; struct HvCallPci_LoadReturn ret; struct iSeries_Device_Node *DevNode = xlate_iomm_address(IoAddress, &dsa, &BarOffset); @@ -787,7 +776,7 @@ u16 iSeries_Read_Word(const volatile void __iomem *IoAddress) ++Pci_Io_Read_Count; HvCall3Ret16(HvCallPciBarLoad16, &ret, dsa, BarOffset, 0); - } while (CheckReturnCode("RDW", DevNode, ret.rc) != 0); + } while (CheckReturnCode("RDW", DevNode, &retry, ret.rc) != 0); return swab16((u16)ret.value); } @@ -797,6 +786,7 @@ u32 iSeries_Read_Long(const volatile void __iomem *IoAddress) { u64 BarOffset; u64 dsa; + int retry = 0; struct HvCallPci_LoadReturn ret; struct iSeries_Device_Node *DevNode = xlate_iomm_address(IoAddress, &dsa, &BarOffset); @@ -817,7 +807,7 @@ u32 iSeries_Read_Long(const volatile void __iomem *IoAddress) ++Pci_Io_Read_Count; HvCall3Ret16(HvCallPciBarLoad32, &ret, dsa, BarOffset, 0); - } while (CheckReturnCode("RDL", DevNode, ret.rc) != 0); + } while (CheckReturnCode("RDL", DevNode, &retry, ret.rc) != 0); return swab32((u32)ret.value); } @@ -834,6 +824,7 @@ void iSeries_Write_Byte(u8 data, volatile void __iomem *IoAddress) { u64 BarOffset; u64 dsa; + int retry = 0; u64 rc; struct iSeries_Device_Node *DevNode = xlate_iomm_address(IoAddress, &dsa, &BarOffset); @@ -853,7 +844,7 @@ void iSeries_Write_Byte(u8 data, volatile void __iomem *IoAddress) do { ++Pci_Io_Write_Count; rc = HvCall4(HvCallPciBarStore8, dsa, BarOffset, data, 0); - } while (CheckReturnCode("WWB", DevNode, rc) != 0); + } while (CheckReturnCode("WWB", DevNode, &retry, rc) != 0); } EXPORT_SYMBOL(iSeries_Write_Byte); @@ -861,6 +852,7 @@ void iSeries_Write_Word(u16 data, volatile void __iomem *IoAddress) { u64 BarOffset; u64 dsa; + int retry = 0; u64 rc; struct iSeries_Device_Node *DevNode = xlate_iomm_address(IoAddress, &dsa, &BarOffset); @@ -880,7 +872,7 @@ void iSeries_Write_Word(u16 data, volatile void __iomem *IoAddress) do { ++Pci_Io_Write_Count; rc = HvCall4(HvCallPciBarStore16, dsa, BarOffset, swab16(data), 0); - } while (CheckReturnCode("WWW", DevNode, rc) != 0); + } while (CheckReturnCode("WWW", DevNode, &retry, rc) != 0); } EXPORT_SYMBOL(iSeries_Write_Word); @@ -888,6 +880,7 @@ void iSeries_Write_Long(u32 data, volatile void __iomem *IoAddress) { u64 BarOffset; u64 dsa; + int retry = 0; u64 rc; struct iSeries_Device_Node *DevNode = xlate_iomm_address(IoAddress, &dsa, &BarOffset); @@ -907,6 +900,6 @@ void iSeries_Write_Long(u32 data, volatile void __iomem *IoAddress) do { ++Pci_Io_Write_Count; rc = HvCall4(HvCallPciBarStore32, dsa, BarOffset, swab32(data), 0); - } while (CheckReturnCode("WWL", DevNode, rc) != 0); + } while (CheckReturnCode("WWL", DevNode, &retry, rc) != 0); } EXPORT_SYMBOL(iSeries_Write_Long); diff --git a/arch/ppc64/kernel/iSeries_pci_reset.c b/arch/ppc64/kernel/iSeries_pci_reset.c deleted file mode 100644 index 0f785e4584f..00000000000 --- a/arch/ppc64/kernel/iSeries_pci_reset.c +++ /dev/null @@ -1,104 +0,0 @@ -#define PCIFR(...) -/************************************************************************/ -/* File iSeries_pci_reset.c created by Allan Trautman on Mar 21 2001. */ -/************************************************************************/ -/* This code supports the pci interface on the IBM iSeries systems. */ -/* Copyright (C) 20yy <Allan H Trautman> <IBM Corp> */ -/* */ -/* This program is free software; you can redistribute it and/or modify */ -/* it under the terms of the GNU General Public License as published by */ -/* the Free Software Foundation; either version 2 of the License, or */ -/* (at your option) any later version. */ -/* */ -/* This program is distributed in the hope that it will be useful, */ -/* but WITHOUT ANY WARRANTY; without even the implied warranty of */ -/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the */ -/* GNU General Public License for more details. */ -/* */ -/* You should have received a copy of the GNU General Public License */ -/* along with this program; if not, write to the: */ -/* Free Software Foundation, Inc., */ -/* 59 Temple Place, Suite 330, */ -/* Boston, MA 02111-1307 USA */ -/************************************************************************/ -/* Change Activity: */ -/* Created, March 20, 2001 */ -/* April 30, 2001, Added return codes on functions. */ -/* September 10, 2001, Ported to ppc64. */ -/* End Change Activity */ -/************************************************************************/ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/delay.h> - -#include <asm/io.h> -#include <asm/iSeries/HvCallPci.h> -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/mf.h> -#include <asm/pci.h> - -#include <asm/iSeries/iSeries_pci.h> -#include "pci.h" - -/* - * Interface to toggle the reset line - * Time is in .1 seconds, need for seconds. - */ -int iSeries_Device_ToggleReset(struct pci_dev *PciDev, int AssertTime, - int DelayTime) -{ - unsigned int AssertDelay, WaitDelay; - struct iSeries_Device_Node *DeviceNode = - (struct iSeries_Device_Node *)PciDev->sysdata; - - if (DeviceNode == NULL) { - printk("PCI: Pci Reset Failed, Device Node not found for pci_dev %p\n", - PciDev); - return -1; - } - /* - * Set defaults, Assert is .5 second, Wait is 3 seconds. - */ - if (AssertTime == 0) - AssertDelay = 500; - else - AssertDelay = AssertTime * 100; - - if (DelayTime == 0) - WaitDelay = 3000; - else - WaitDelay = DelayTime * 100; - - /* - * Assert reset - */ - DeviceNode->ReturnCode = HvCallPci_setSlotReset(ISERIES_BUS(DeviceNode), - 0x00, DeviceNode->AgentId, 1); - if (DeviceNode->ReturnCode == 0) { - msleep(AssertDelay); /* Sleep for the time */ - DeviceNode->ReturnCode = - HvCallPci_setSlotReset(ISERIES_BUS(DeviceNode), - 0x00, DeviceNode->AgentId, 0); - - /* - * Wait for device to reset - */ - msleep(WaitDelay); - } - if (DeviceNode->ReturnCode == 0) - PCIFR("Slot 0x%04X.%02 Reset\n", ISERIES_BUS(DeviceNode), - DeviceNode->AgentId); - else { - printk("PCI: Slot 0x%04X.%02X Reset Failed, RCode: %04X\n", - ISERIES_BUS(DeviceNode), DeviceNode->AgentId, - DeviceNode->ReturnCode); - PCIFR("Slot 0x%04X.%02X Reset Failed, RCode: %04X\n", - ISERIES_BUS(DeviceNode), DeviceNode->AgentId, - DeviceNode->ReturnCode); - } - return DeviceNode->ReturnCode; -} -EXPORT_SYMBOL(iSeries_Device_ToggleReset); diff --git a/arch/ppc64/kernel/iSeries_proc.c b/arch/ppc64/kernel/iSeries_proc.c index 0cc58ddf48d..356bd9931fc 100644 --- a/arch/ppc64/kernel/iSeries_proc.c +++ b/arch/ppc64/kernel/iSeries_proc.c @@ -28,8 +28,7 @@ #include <asm/iSeries/ItLpQueue.h> #include <asm/iSeries/HvCallXm.h> #include <asm/iSeries/IoHriMainStore.h> -#include <asm/iSeries/LparData.h> -#include <asm/iSeries/iSeries_proc.h> +#include <asm/iSeries/IoHriProcessorVpd.h> static int __init iseries_proc_create(void) { diff --git a/arch/ppc64/kernel/iSeries_setup.c b/arch/ppc64/kernel/iSeries_setup.c index da20120f226..b31962436fe 100644 --- a/arch/ppc64/kernel/iSeries_setup.c +++ b/arch/ppc64/kernel/iSeries_setup.c @@ -47,7 +47,7 @@ #include <asm/paca.h> #include <asm/cache.h> #include <asm/sections.h> -#include <asm/iSeries/LparData.h> +#include <asm/abs_addr.h> #include <asm/iSeries/HvCallHpt.h> #include <asm/iSeries/HvLpConfig.h> #include <asm/iSeries/HvCallEvent.h> @@ -55,10 +55,12 @@ #include <asm/iSeries/HvCallXm.h> #include <asm/iSeries/ItLpQueue.h> #include <asm/iSeries/IoHriMainStore.h> -#include <asm/iSeries/iSeries_proc.h> #include <asm/iSeries/mf.h> #include <asm/iSeries/HvLpEvent.h> #include <asm/iSeries/iSeries_irq.h> +#include <asm/iSeries/IoHriProcessorVpd.h> +#include <asm/iSeries/ItVpdAreas.h> +#include <asm/iSeries/LparMap.h> extern void hvlog(char *fmt, ...); @@ -74,7 +76,11 @@ extern void ppcdbg_initialize(void); static void build_iSeries_Memory_Map(void); static void setup_iSeries_cache_sizes(void); static void iSeries_bolt_kernel(unsigned long saddr, unsigned long eaddr); +#ifdef CONFIG_PCI extern void iSeries_pci_final_fixup(void); +#else +static void iSeries_pci_final_fixup(void) { } +#endif /* Global Variables */ static unsigned long procFreqHz; @@ -852,6 +858,32 @@ static int __init iSeries_src_init(void) late_initcall(iSeries_src_init); +static int set_spread_lpevents(char *str) +{ + unsigned long i; + unsigned long val = simple_strtoul(str, NULL, 0); + + /* + * The parameter is the number of processors to share in processing + * lp events. + */ + if (( val > 0) && (val <= NR_CPUS)) { + for (i = 1; i < val; ++i) + paca[i].lpqueue_ptr = paca[0].lpqueue_ptr; + + printk("lpevent processing spread over %ld processors\n", val); + } else { + printk("invalid spread_lpevents %ld\n", val); + } + + return 1; +} +__setup("spread_lpevents=", set_spread_lpevents); + +#ifndef CONFIG_PCI +void __init iSeries_init_IRQ(void) { } +#endif + void __init iSeries_early_setup(void) { iSeries_fixup_klimit(); diff --git a/arch/ppc64/kernel/iSeries_smp.c b/arch/ppc64/kernel/iSeries_smp.c index ba1f084d546..f74386e3163 100644 --- a/arch/ppc64/kernel/iSeries_smp.c +++ b/arch/ppc64/kernel/iSeries_smp.c @@ -38,9 +38,7 @@ #include <asm/io.h> #include <asm/smp.h> #include <asm/paca.h> -#include <asm/iSeries/LparData.h> #include <asm/iSeries/HvCall.h> -#include <asm/iSeries/HvCallCfg.h> #include <asm/time.h> #include <asm/ppcdebug.h> #include <asm/machdep.h> diff --git a/arch/ppc64/kernel/idle.c b/arch/ppc64/kernel/idle.c index 6abc621d3ba..bdf13b4dc1c 100644 --- a/arch/ppc64/kernel/idle.c +++ b/arch/ppc64/kernel/idle.c @@ -42,6 +42,11 @@ static int (*idle_loop)(void); static unsigned long maxYieldTime = 0; static unsigned long minYieldTime = 0xffffffffffffffffUL; +static inline void process_iSeries_events(void) +{ + asm volatile ("li 0,0x5555; sc" : : : "r0", "r3"); +} + static void yield_shared_processor(void) { unsigned long tb; @@ -75,13 +80,9 @@ static int iSeries_idle(void) { struct paca_struct *lpaca; long oldval; - unsigned long CTRL; /* ensure iSeries run light will be out when idle */ - clear_thread_flag(TIF_RUN_LIGHT); - CTRL = mfspr(CTRLF); - CTRL &= ~RUNLATCH; - mtspr(CTRLT, CTRL); + ppc64_runlatch_off(); lpaca = get_paca(); @@ -111,7 +112,9 @@ static int iSeries_idle(void) } } + ppc64_runlatch_on(); schedule(); + ppc64_runlatch_off(); } return 0; @@ -294,7 +297,7 @@ static int native_idle(void) if (need_resched()) schedule(); - if (cpu_is_offline(_smp_processor_id()) && + if (cpu_is_offline(raw_smp_processor_id()) && system_state == SYSTEM_RUNNING) cpu_die(); } diff --git a/arch/ppc64/kernel/iommu.c b/arch/ppc64/kernel/iommu.c index 344164681d2..8316426ccaf 100644 --- a/arch/ppc64/kernel/iommu.c +++ b/arch/ppc64/kernel/iommu.c @@ -423,6 +423,9 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl) tbl->it_largehint = tbl->it_halfpoint; spin_lock_init(&tbl->it_lock); + /* Clear the hardware table in case firmware left allocations in it */ + ppc_md.tce_free(tbl, tbl->it_offset, tbl->it_size); + if (!welcomed) { printk(KERN_INFO "IOMMU table initialized, virtual merging %s\n", novmerge ? "disabled" : "enabled"); diff --git a/arch/ppc64/kernel/irq.c b/arch/ppc64/kernel/irq.c index 4fd7f203c1e..d860467b8f0 100644 --- a/arch/ppc64/kernel/irq.c +++ b/arch/ppc64/kernel/irq.c @@ -52,7 +52,7 @@ #include <asm/cache.h> #include <asm/prom.h> #include <asm/ptrace.h> -#include <asm/iSeries/LparData.h> +#include <asm/iSeries/ItLpQueue.h> #include <asm/machdep.h> #include <asm/paca.h> diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c index 103daaf7357..e950a2058a1 100644 --- a/arch/ppc64/kernel/kprobes.c +++ b/arch/ppc64/kernel/kprobes.c @@ -45,12 +45,17 @@ static struct pt_regs jprobe_saved_regs; int arch_prepare_kprobe(struct kprobe *p) { + int ret = 0; kprobe_opcode_t insn = *p->addr; - if (IS_MTMSRD(insn) || IS_RFID(insn)) - /* cannot put bp on RFID/MTMSRD */ - return 1; - return 0; + if ((unsigned long)p->addr & 0x03) { + printk("Attempt to register kprobe at an unaligned address\n"); + ret = -EINVAL; + } else if (IS_MTMSRD(insn) || IS_RFID(insn)) { + printk("Cannot register a kprobe on rfid or mtmsrd\n"); + ret = -EINVAL; + } + return ret; } void arch_copy_kprobe(struct kprobe *p) @@ -172,8 +177,6 @@ static void resume_execution(struct kprobe *p, struct pt_regs *regs) ret = emulate_step(regs, p->ainsn.insn[0]); if (ret == 0) regs->nip = (unsigned long)p->addr + 4; - - regs->msr &= ~MSR_SE; } static inline int post_kprobe_handler(struct pt_regs *regs) @@ -210,6 +213,7 @@ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) if (kprobe_status & KPROBE_HIT_SS) { resume_execution(current_kprobe, regs); + regs->msr &= ~MSR_SE; regs->msr |= kprobe_saved_msr; unlock_kprobes(); @@ -233,8 +237,6 @@ int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, */ preempt_disable(); switch (val) { - case DIE_IABR_MATCH: - case DIE_DABR_MATCH: case DIE_BPT: if (kprobe_handler(args->regs)) ret = NOTIFY_STOP; diff --git a/arch/ppc64/kernel/lparcfg.c b/arch/ppc64/kernel/lparcfg.c index a8fd32df848..387923fcf9b 100644 --- a/arch/ppc64/kernel/lparcfg.c +++ b/arch/ppc64/kernel/lparcfg.c @@ -28,12 +28,12 @@ #include <asm/uaccess.h> #include <asm/iSeries/HvLpConfig.h> #include <asm/lppaca.h> -#include <asm/iSeries/LparData.h> #include <asm/hvcall.h> #include <asm/cputable.h> #include <asm/rtas.h> #include <asm/system.h> #include <asm/time.h> +#include <asm/iSeries/ItExtVpdPanel.h> #define MODULE_VERS "1.6" #define MODULE_NAME "lparcfg" diff --git a/arch/ppc64/kernel/mf.c b/arch/ppc64/kernel/mf.c index 1bd52ece497..d98bebf7042 100644 --- a/arch/ppc64/kernel/mf.c +++ b/arch/ppc64/kernel/mf.c @@ -1,7 +1,7 @@ /* * mf.c * Copyright (C) 2001 Troy D. Armstrong IBM Corporation - * Copyright (C) 2004 Stephen Rothwell IBM Corporation + * Copyright (C) 2004-2005 Stephen Rothwell IBM Corporation * * This modules exists as an interface between a Linux secondary partition * running on an iSeries and the primary partition's Virtual Service @@ -36,10 +36,11 @@ #include <asm/time.h> #include <asm/uaccess.h> +#include <asm/paca.h> #include <asm/iSeries/vio.h> #include <asm/iSeries/mf.h> #include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/ItSpCommArea.h> +#include <asm/iSeries/ItLpQueue.h> /* * This is the structure layout for the Machine Facilites LPAR event @@ -696,36 +697,23 @@ static void get_rtc_time_complete(void *token, struct ce_msg_data *ce_msg) complete(&rtc->com); } -int mf_get_rtc(struct rtc_time *tm) +static int rtc_set_tm(int rc, u8 *ce_msg, struct rtc_time *tm) { - struct ce_msg_comp_data ce_complete; - struct rtc_time_data rtc_data; - int rc; - - memset(&ce_complete, 0, sizeof(ce_complete)); - memset(&rtc_data, 0, sizeof(rtc_data)); - init_completion(&rtc_data.com); - ce_complete.handler = &get_rtc_time_complete; - ce_complete.token = &rtc_data; - rc = signal_ce_msg_simple(0x40, &ce_complete); - if (rc) - return rc; - wait_for_completion(&rtc_data.com); tm->tm_wday = 0; tm->tm_yday = 0; tm->tm_isdst = 0; - if (rtc_data.rc) { + if (rc) { tm->tm_sec = 0; tm->tm_min = 0; tm->tm_hour = 0; tm->tm_mday = 15; tm->tm_mon = 5; tm->tm_year = 52; - return rtc_data.rc; + return rc; } - if ((rtc_data.ce_msg.ce_msg[2] == 0xa9) || - (rtc_data.ce_msg.ce_msg[2] == 0xaf)) { + if ((ce_msg[2] == 0xa9) || + (ce_msg[2] == 0xaf)) { /* TOD clock is not set */ tm->tm_sec = 1; tm->tm_min = 1; @@ -736,7 +724,6 @@ int mf_get_rtc(struct rtc_time *tm) mf_set_rtc(tm); } { - u8 *ce_msg = rtc_data.ce_msg.ce_msg; u8 year = ce_msg[5]; u8 sec = ce_msg[6]; u8 min = ce_msg[7]; @@ -765,6 +752,63 @@ int mf_get_rtc(struct rtc_time *tm) return 0; } +int mf_get_rtc(struct rtc_time *tm) +{ + struct ce_msg_comp_data ce_complete; + struct rtc_time_data rtc_data; + int rc; + + memset(&ce_complete, 0, sizeof(ce_complete)); + memset(&rtc_data, 0, sizeof(rtc_data)); + init_completion(&rtc_data.com); + ce_complete.handler = &get_rtc_time_complete; + ce_complete.token = &rtc_data; + rc = signal_ce_msg_simple(0x40, &ce_complete); + if (rc) + return rc; + wait_for_completion(&rtc_data.com); + return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm); +} + +struct boot_rtc_time_data { + int busy; + struct ce_msg_data ce_msg; + int rc; +}; + +static void get_boot_rtc_time_complete(void *token, struct ce_msg_data *ce_msg) +{ + struct boot_rtc_time_data *rtc = token; + + memcpy(&rtc->ce_msg, ce_msg, sizeof(rtc->ce_msg)); + rtc->rc = 0; + rtc->busy = 0; +} + +int mf_get_boot_rtc(struct rtc_time *tm) +{ + struct ce_msg_comp_data ce_complete; + struct boot_rtc_time_data rtc_data; + int rc; + + memset(&ce_complete, 0, sizeof(ce_complete)); + memset(&rtc_data, 0, sizeof(rtc_data)); + rtc_data.busy = 1; + ce_complete.handler = &get_boot_rtc_time_complete; + ce_complete.token = &rtc_data; + rc = signal_ce_msg_simple(0x40, &ce_complete); + if (rc) + return rc; + /* We need to poll here as we are not yet taking interrupts */ + while (rtc_data.busy) { + extern unsigned long lpevent_count; + struct ItLpQueue *lpq = get_paca()->lpqueue_ptr; + if (lpq && ItLpQueue_isLpIntPending(lpq)) + lpevent_count += ItLpQueue_process(lpq, NULL); + } + return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm); +} + int mf_set_rtc(struct rtc_time *tm) { char ce_time[12]; diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S index b944717c1db..e3c73b3425d 100644 --- a/arch/ppc64/kernel/misc.S +++ b/arch/ppc64/kernel/misc.S @@ -792,7 +792,7 @@ _GLOBAL(sys_call_table32) .llong .compat_sys_newstat .llong .compat_sys_newlstat .llong .compat_sys_newfstat - .llong .sys_uname + .llong .sys32_uname .llong .sys_ni_syscall /* 110 old iopl syscall */ .llong .sys_vhangup .llong .sys_ni_syscall /* old idle syscall */ diff --git a/arch/ppc64/kernel/of_device.c b/arch/ppc64/kernel/of_device.c index f4c825a69fa..66bd5ab7c25 100644 --- a/arch/ppc64/kernel/of_device.c +++ b/arch/ppc64/kernel/of_device.c @@ -161,7 +161,7 @@ void of_unregister_driver(struct of_platform_driver *drv) } -static ssize_t dev_show_devspec(struct device *dev, char *buf) +static ssize_t dev_show_devspec(struct device *dev, struct device_attribute *attr, char *buf) { struct of_device *ofdev; diff --git a/arch/ppc64/kernel/pSeries_reconfig.c b/arch/ppc64/kernel/pSeries_reconfig.c index cb5443f2e49..dc2a69d412a 100644 --- a/arch/ppc64/kernel/pSeries_reconfig.c +++ b/arch/ppc64/kernel/pSeries_reconfig.c @@ -47,14 +47,6 @@ static void remove_node_proc_entries(struct device_node *np) remove_proc_entry(pp->name, np->pde); pp = pp->next; } - - /* Assuming that symlinks have the same parent directory as - * np->pde. - */ - if (np->name_link) - remove_proc_entry(np->name_link->name, parent->pde); - if (np->addr_link) - remove_proc_entry(np->addr_link->name, parent->pde); if (np->pde) remove_proc_entry(np->pde->name, parent->pde); } diff --git a/arch/ppc64/kernel/pSeries_smp.c b/arch/ppc64/kernel/pSeries_smp.c index fbad349ec58..4203bd020c8 100644 --- a/arch/ppc64/kernel/pSeries_smp.c +++ b/arch/ppc64/kernel/pSeries_smp.c @@ -375,7 +375,7 @@ static int smp_pSeries_cpu_bootable(unsigned int nr) * cpus are assumed to be secondary threads. */ if (system_state < SYSTEM_RUNNING && - cur_cpu_spec->cpu_features & CPU_FTR_SMT && + cpu_has_feature(CPU_FTR_SMT) && !smt_enabled_at_boot && nr % 2 != 0) return 0; @@ -419,8 +419,8 @@ void __init smp_init_pSeries(void) #endif /* Mark threads which are still spinning in hold loops. */ - if (cur_cpu_spec->cpu_features & CPU_FTR_SMT) - for_each_present_cpu(i) { + if (cpu_has_feature(CPU_FTR_SMT)) { + for_each_present_cpu(i) { if (i % 2 == 0) /* * Even-numbered logical cpus correspond to @@ -428,8 +428,9 @@ void __init smp_init_pSeries(void) */ cpu_set(i, of_spin_map); } - else + } else { of_spin_map = cpu_present_map; + } cpu_clear(boot_cpuid, of_spin_map); diff --git a/arch/ppc64/kernel/pci.c b/arch/ppc64/kernel/pci.c index d786d4b6af0..2bf0513f3ec 100644 --- a/arch/ppc64/kernel/pci.c +++ b/arch/ppc64/kernel/pci.c @@ -507,7 +507,7 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, } #ifdef CONFIG_PPC_MULTIPLATFORM -static ssize_t pci_show_devspec(struct device *dev, char *buf) +static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf) { struct pci_dev *pdev; struct device_node *np; diff --git a/arch/ppc64/kernel/pmac_smp.c b/arch/ppc64/kernel/pmac_smp.c index c27588ede2f..a23de37227b 100644 --- a/arch/ppc64/kernel/pmac_smp.c +++ b/arch/ppc64/kernel/pmac_smp.c @@ -68,6 +68,7 @@ extern struct smp_ops_t *smp_ops; static void (*pmac_tb_freeze)(int freeze); static struct device_node *pmac_tb_clock_chip_host; +static u8 pmac_tb_pulsar_addr; static DEFINE_SPINLOCK(timebase_lock); static unsigned long timebase; @@ -106,12 +107,9 @@ static void smp_core99_pulsar_tb_freeze(int freeze) u8 data; int rc; - /* Strangely, the device-tree says address is 0xd2, but darwin - * accesses 0xd0 ... - */ pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined); rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, - 0xd4 | pmac_low_i2c_read, + pmac_tb_pulsar_addr | pmac_low_i2c_read, 0x2e, &data, 1); if (rc != 0) goto bail; @@ -120,7 +118,7 @@ static void smp_core99_pulsar_tb_freeze(int freeze) pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub); rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, - 0xd4 | pmac_low_i2c_write, + pmac_tb_pulsar_addr | pmac_low_i2c_write, 0x2e, &data, 1); bail: if (rc != 0) { @@ -185,6 +183,12 @@ static int __init smp_core99_probe(void) if (ncpus <= 1) return 1; + /* HW sync only on these platforms */ + if (!machine_is_compatible("PowerMac7,2") && + !machine_is_compatible("PowerMac7,3") && + !machine_is_compatible("RackMac3,1")) + goto nohwsync; + /* Look for the clock chip */ for (cc = NULL; (cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL;) { struct device_node *p = of_get_parent(cc); @@ -198,11 +202,18 @@ static int __init smp_core99_probe(void) goto next; switch (*reg) { case 0xd2: - pmac_tb_freeze = smp_core99_cypress_tb_freeze; - printk(KERN_INFO "Timebase clock is Cypress chip\n"); + if (device_is_compatible(cc, "pulsar-legacy-slewing")) { + pmac_tb_freeze = smp_core99_pulsar_tb_freeze; + pmac_tb_pulsar_addr = 0xd2; + printk(KERN_INFO "Timebase clock is Pulsar chip\n"); + } else if (device_is_compatible(cc, "cy28508")) { + pmac_tb_freeze = smp_core99_cypress_tb_freeze; + printk(KERN_INFO "Timebase clock is Cypress chip\n"); + } break; case 0xd4: pmac_tb_freeze = smp_core99_pulsar_tb_freeze; + pmac_tb_pulsar_addr = 0xd4; printk(KERN_INFO "Timebase clock is Pulsar chip\n"); break; } @@ -210,12 +221,15 @@ static int __init smp_core99_probe(void) pmac_tb_clock_chip_host = p; smp_ops->give_timebase = smp_core99_give_timebase; smp_ops->take_timebase = smp_core99_take_timebase; + of_node_put(cc); + of_node_put(p); break; } next: of_node_put(p); } + nohwsync: mpic_request_ipis(); return ncpus; diff --git a/arch/ppc64/kernel/process.c b/arch/ppc64/kernel/process.c index 8b068612273..aba89554d89 100644 --- a/arch/ppc64/kernel/process.c +++ b/arch/ppc64/kernel/process.c @@ -58,14 +58,6 @@ struct task_struct *last_task_used_math = NULL; struct task_struct *last_task_used_altivec = NULL; #endif -struct mm_struct ioremap_mm = { - .pgd = ioremap_dir, - .mm_users = ATOMIC_INIT(2), - .mm_count = ATOMIC_INIT(1), - .cpu_vm_mask = CPU_MASK_ALL, - .page_table_lock = SPIN_LOCK_UNLOCKED, -}; - /* * Make sure the floating-point register state in the * the thread_struct is up to date for task tsk. @@ -378,9 +370,6 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp, childregs->gpr[1] = sp + sizeof(struct pt_regs); p->thread.regs = NULL; /* no user register state */ clear_ti_thread_flag(p->thread_info, TIF_32BIT); -#ifdef CONFIG_PPC_ISERIES - set_ti_thread_flag(p->thread_info, TIF_RUN_LIGHT); -#endif } else { childregs->gpr[1] = usp; p->thread.regs = childregs; diff --git a/arch/ppc64/kernel/prom.c b/arch/ppc64/kernel/prom.c index eb6538b5800..47727a6f734 100644 --- a/arch/ppc64/kernel/prom.c +++ b/arch/ppc64/kernel/prom.c @@ -884,6 +884,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node, { char *type = get_flat_dt_prop(node, "device_type", NULL); u32 *prop; + unsigned long size; /* We are scanning "cpu" nodes only */ if (type == NULL || strcmp(type, "cpu") != 0) @@ -929,6 +930,17 @@ static int __init early_init_dt_scan_cpus(unsigned long node, cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC; } + /* + * Check for an SMT capable CPU and set the CPU feature. We do + * this by looking at the size of the ibm,ppc-interrupt-server#s + * property + */ + prop = (u32 *)get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", + &size); + cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT; + if (prop && ((size / sizeof(u32)) > 1)) + cur_cpu_spec->cpu_features |= CPU_FTR_SMT; + return 0; } diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index 35ec42de962..b7683abfbe6 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -211,13 +211,23 @@ struct { */ #define ADDR(x) (u32) ((unsigned long)(x) - offset) +/* + * Error results ... some OF calls will return "-1" on error, some + * will return 0, some will return either. To simplify, here are + * macros to use with any ihandle or phandle return value to check if + * it is valid + */ + +#define PROM_ERROR (-1u) +#define PHANDLE_VALID(p) ((p) != 0 && (p) != PROM_ERROR) +#define IHANDLE_VALID(i) ((i) != 0 && (i) != PROM_ERROR) + + /* This is the one and *ONLY* place where we actually call open * firmware from, since we need to make sure we're running in 32b * mode when we do. We switch back to 64b mode upon return. */ -#define PROM_ERROR (-1) - static int __init call_prom(const char *service, int nargs, int nret, ...) { int i; @@ -587,14 +597,13 @@ static void __init prom_send_capabilities(void) { unsigned long offset = reloc_offset(); ihandle elfloader; - int ret; elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader")); if (elfloader == 0) { prom_printf("couldn't open /packages/elf-loader\n"); return; } - ret = call_prom("call-method", 3, 1, ADDR("process-elf-header"), + call_prom("call-method", 3, 1, ADDR("process-elf-header"), elfloader, ADDR(&fake_elf)); call_prom("close", 1, 0, elfloader); } @@ -646,7 +655,7 @@ static unsigned long __init alloc_up(unsigned long size, unsigned long align) base = _ALIGN_UP(base + 0x100000, align)) { prom_debug(" trying: 0x%x\n\r", base); addr = (unsigned long)prom_claim(base, size, 0); - if ((int)addr != PROM_ERROR) + if (addr != PROM_ERROR) break; addr = 0; if (align == 0) @@ -708,7 +717,7 @@ static unsigned long __init alloc_down(unsigned long size, unsigned long align, for(; base > RELOC(alloc_bottom); base = _ALIGN_DOWN(base - 0x100000, align)) { prom_debug(" trying: 0x%x\n\r", base); addr = (unsigned long)prom_claim(base, size, 0); - if ((int)addr != PROM_ERROR) + if (addr != PROM_ERROR) break; addr = 0; } @@ -902,18 +911,19 @@ static void __init prom_instantiate_rtas(void) { unsigned long offset = reloc_offset(); struct prom_t *_prom = PTRRELOC(&prom); - phandle prom_rtas, rtas_node; + phandle rtas_node; + ihandle rtas_inst; u32 base, entry = 0; u32 size = 0; prom_debug("prom_instantiate_rtas: start...\n"); - prom_rtas = call_prom("finddevice", 1, 1, ADDR("/rtas")); - prom_debug("prom_rtas: %x\n", prom_rtas); - if (prom_rtas == (phandle) -1) + rtas_node = call_prom("finddevice", 1, 1, ADDR("/rtas")); + prom_debug("rtas_node: %x\n", rtas_node); + if (!PHANDLE_VALID(rtas_node)) return; - prom_getprop(prom_rtas, "rtas-size", &size, sizeof(size)); + prom_getprop(rtas_node, "rtas-size", &size, sizeof(size)); if (size == 0) return; @@ -922,14 +932,18 @@ static void __init prom_instantiate_rtas(void) prom_printf("RTAS allocation failed !\n"); return; } - prom_printf("instantiating rtas at 0x%x", base); - rtas_node = call_prom("open", 1, 1, ADDR("/rtas")); - prom_printf("..."); + rtas_inst = call_prom("open", 1, 1, ADDR("/rtas")); + if (!IHANDLE_VALID(rtas_inst)) { + prom_printf("opening rtas package failed"); + return; + } + + prom_printf("instantiating rtas at 0x%x ...", base); if (call_prom("call-method", 3, 2, ADDR("instantiate-rtas"), - rtas_node, base) != PROM_ERROR) { + rtas_inst, base) != PROM_ERROR) { entry = (long)_prom->args.rets[1]; } if (entry == 0) { @@ -940,8 +954,8 @@ static void __init prom_instantiate_rtas(void) reserve_mem(base, size); - prom_setprop(prom_rtas, "linux,rtas-base", &base, sizeof(base)); - prom_setprop(prom_rtas, "linux,rtas-entry", &entry, sizeof(entry)); + prom_setprop(rtas_node, "linux,rtas-base", &base, sizeof(base)); + prom_setprop(rtas_node, "linux,rtas-entry", &entry, sizeof(entry)); prom_debug("rtas base = 0x%x\n", base); prom_debug("rtas entry = 0x%x\n", entry); @@ -1062,7 +1076,7 @@ static void __init prom_initialize_tce_table(void) prom_printf("opening PHB %s", path); phb_node = call_prom("open", 1, 1, path); - if ( (long)phb_node <= 0) + if (phb_node == 0) prom_printf("... failed\n"); else prom_printf("... done\n"); @@ -1279,12 +1293,12 @@ static void __init prom_init_client_services(unsigned long pp) /* get a handle for the stdout device */ _prom->chosen = call_prom("finddevice", 1, 1, ADDR("/chosen")); - if ((long)_prom->chosen <= 0) + if (!PHANDLE_VALID(_prom->chosen)) prom_panic("cannot find chosen"); /* msg won't be printed :( */ /* get device tree root */ _prom->root = call_prom("finddevice", 1, 1, ADDR("/")); - if ((long)_prom->root <= 0) + if (!PHANDLE_VALID(_prom->root)) prom_panic("cannot find device tree root"); /* msg won't be printed :( */ } @@ -1356,9 +1370,8 @@ static int __init prom_find_machine_type(void) } /* Default to pSeries. We need to know if we are running LPAR */ rtas = call_prom("finddevice", 1, 1, ADDR("/rtas")); - if (rtas != (phandle) -1) { - unsigned long x; - x = prom_getproplen(rtas, "ibm,hypertas-functions"); + if (PHANDLE_VALID(rtas)) { + int x = prom_getproplen(rtas, "ibm,hypertas-functions"); if (x != PROM_ERROR) { prom_printf("Hypertas detected, assuming LPAR !\n"); return PLATFORM_PSERIES_LPAR; @@ -1426,12 +1439,13 @@ static void __init prom_check_displays(void) * leave some room at the end of the path for appending extra * arguments */ - if (call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-10) < 0) + if (call_prom("package-to-path", 3, 1, node, path, + PROM_SCRATCH_SIZE-10) == PROM_ERROR) continue; prom_printf("found display : %s, opening ... ", path); ih = call_prom("open", 1, 1, path); - if (ih == (ihandle)0 || ih == (ihandle)-1) { + if (ih == 0) { prom_printf("failed\n"); continue; } @@ -1514,6 +1528,12 @@ static unsigned long __init dt_find_string(char *str) return 0; } +/* + * The Open Firmware 1275 specification states properties must be 31 bytes or + * less, however not all firmwares obey this. Make it 64 bytes to be safe. + */ +#define MAX_PROPERTY_NAME 64 + static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start, unsigned long *mem_end) { @@ -1527,10 +1547,12 @@ static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start, /* get and store all property names */ prev_name = RELOC(""); for (;;) { - - /* 32 is max len of name including nul. */ - namep = make_room(mem_start, mem_end, 32, 1); - if (call_prom("nextprop", 3, 1, node, prev_name, namep) <= 0) { + int rc; + + /* 64 is max len of name including nul. */ + namep = make_room(mem_start, mem_end, MAX_PROPERTY_NAME, 1); + rc = call_prom("nextprop", 3, 1, node, prev_name, namep); + if (rc != 1) { /* No more nodes: unwind alloc */ *mem_start = (unsigned long)namep; break; @@ -1555,18 +1577,12 @@ static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start, } } -/* - * The Open Firmware 1275 specification states properties must be 31 bytes or - * less, however not all firmwares obey this. Make it 64 bytes to be safe. - */ -#define MAX_PROPERTY_NAME 64 - static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, unsigned long *mem_end) { int l, align; phandle child; - char *namep, *prev_name, *sstart; + char *namep, *prev_name, *sstart, *p, *ep; unsigned long soff; unsigned char *valp; unsigned long offset = reloc_offset(); @@ -1588,6 +1604,14 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, call_prom("package-to-path", 3, 1, node, namep, l); } namep[l] = '\0'; + /* Fixup an Apple bug where they have bogus \0 chars in the + * middle of the path in some properties + */ + for (p = namep, ep = namep + l; p < ep; p++) + if (*p == '\0') { + memmove(p, p+1, ep - p); + ep--; l--; + } *mem_start = _ALIGN(((unsigned long) namep) + strlen(namep) + 1, 4); } @@ -1599,7 +1623,10 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, prev_name = RELOC(""); sstart = (char *)RELOC(dt_string_start); for (;;) { - if (call_prom("nextprop", 3, 1, node, prev_name, pname) <= 0) + int rc; + + rc = call_prom("nextprop", 3, 1, node, prev_name, pname); + if (rc != 1) break; /* find string offset */ @@ -1615,7 +1642,7 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, l = call_prom("getproplen", 2, 1, node, pname); /* sanity checks */ - if (l < 0) + if (l == PROM_ERROR) continue; if (l > MAX_PROPERTY_LENGTH) { prom_printf("WARNING: ignoring large property "); @@ -1750,7 +1777,45 @@ static void __init flatten_device_tree(void) prom_printf("Device tree struct 0x%x -> 0x%x\n", RELOC(dt_struct_start), RELOC(dt_struct_end)); - } +} + + +static void __init fixup_device_tree(void) +{ + unsigned long offset = reloc_offset(); + phandle u3, i2c, mpic; + u32 u3_rev; + u32 interrupts[2]; + u32 parent; + + /* Some G5s have a missing interrupt definition, fix it up here */ + u3 = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000")); + if (!PHANDLE_VALID(u3)) + return; + i2c = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000")); + if (!PHANDLE_VALID(i2c)) + return; + mpic = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000")); + if (!PHANDLE_VALID(mpic)) + return; + + /* check if proper rev of u3 */ + if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) + == PROM_ERROR) + return; + if (u3_rev != 0x35) + return; + /* does it need fixup ? */ + if (prom_getproplen(i2c, "interrupts") > 0) + return; + /* interrupt on this revision of u3 is number 0 and level */ + interrupts[0] = 0; + interrupts[1] = 1; + prom_setprop(i2c, "interrupts", &interrupts, sizeof(interrupts)); + parent = (u32)mpic; + prom_setprop(i2c, "interrupt-parent", &parent, sizeof(parent)); +} + static void __init prom_find_boot_cpu(void) { @@ -1844,6 +1909,12 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long &getprop_rval, sizeof(getprop_rval)); /* + * On pSeries, inform the firmware about our capabilities + */ + if (RELOC(of_platform) & PLATFORM_PSERIES) + prom_send_capabilities(); + + /* * On pSeries, copy the CPU hold code */ if (RELOC(of_platform) & PLATFORM_PSERIES) @@ -1920,6 +1991,11 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long } /* + * Fixup any known bugs in the device-tree + */ + fixup_device_tree(); + + /* * Now finally create the flattened device-tree */ prom_printf("copying OF device tree ...\n"); diff --git a/arch/ppc64/kernel/ras.c b/arch/ppc64/kernel/ras.c index 1c4c796b212..3c00f7bfc1b 100644 --- a/arch/ppc64/kernel/ras.c +++ b/arch/ppc64/kernel/ras.c @@ -47,7 +47,6 @@ #include <asm/cache.h> #include <asm/prom.h> #include <asm/ptrace.h> -#include <asm/iSeries/LparData.h> #include <asm/machdep.h> #include <asm/rtas.h> #include <asm/ppcdebug.h> diff --git a/arch/ppc64/kernel/rtasd.c b/arch/ppc64/kernel/rtasd.c index ff65dc33320..b0c3b829fe4 100644 --- a/arch/ppc64/kernel/rtasd.c +++ b/arch/ppc64/kernel/rtasd.c @@ -440,7 +440,7 @@ static int rtasd(void *unused) goto error; } - printk(KERN_ERR "RTAS daemon started\n"); + printk(KERN_INFO "RTAS daemon started\n"); DEBUG("will sleep for %d jiffies\n", (HZ*60/rtas_event_scan_rate) / 2); @@ -485,7 +485,7 @@ static int __init rtas_init(void) /* No RTAS, only warn if we are on a pSeries box */ if (rtas_token("event-scan") == RTAS_UNKNOWN_SERVICE) { if (systemcfg->platform & PLATFORM_PSERIES) - printk(KERN_ERR "rtasd: no event-scan on system\n"); + printk(KERN_INFO "rtasd: no event-scan on system\n"); return 1; } diff --git a/arch/ppc64/kernel/rtc.c b/arch/ppc64/kernel/rtc.c index 3e70b91375f..de02aedbe08 100644 --- a/arch/ppc64/kernel/rtc.c +++ b/arch/ppc64/kernel/rtc.c @@ -42,10 +42,8 @@ #include <asm/time.h> #include <asm/rtas.h> -#include <asm/iSeries/LparData.h> #include <asm/iSeries/mf.h> #include <asm/machdep.h> -#include <asm/iSeries/ItSpCommArea.h> extern int piranha_simulator; @@ -292,47 +290,10 @@ int iSeries_set_rtc_time(struct rtc_time *tm) void iSeries_get_boot_time(struct rtc_time *tm) { - unsigned long time; - static unsigned long lastsec = 1; - - u32 dataWord1 = *((u32 *)(&xSpCommArea.xBcdTimeAtIplStart)); - u32 dataWord2 = *(((u32 *)&(xSpCommArea.xBcdTimeAtIplStart)) + 1); - int year = 1970; - int year1 = ( dataWord1 >> 24 ) & 0x000000FF; - int year2 = ( dataWord1 >> 16 ) & 0x000000FF; - int sec = ( dataWord1 >> 8 ) & 0x000000FF; - int min = dataWord1 & 0x000000FF; - int hour = ( dataWord2 >> 24 ) & 0x000000FF; - int day = ( dataWord2 >> 8 ) & 0x000000FF; - int mon = dataWord2 & 0x000000FF; - if ( piranha_simulator ) return; - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hour); - BCD_TO_BIN(day); - BCD_TO_BIN(mon); - BCD_TO_BIN(year1); - BCD_TO_BIN(year2); - year = year1 * 100 + year2; - - time = mktime(year, mon, day, hour, min, sec); - time += ( jiffies / HZ ); - - /* Now THIS is a nasty hack! - * It ensures that the first two calls get different answers. - * That way the loop in init_time (time.c) will not think - * the clock is stuck. - */ - if ( lastsec ) { - time -= lastsec; - --lastsec; - } - - to_tm(time, tm); - tm->tm_year -= 1900; + mf_get_boot_rtc(tm); tm->tm_mon -= 1; } #endif diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c index 21c57f539c2..8e439a81764 100644 --- a/arch/ppc64/kernel/setup.c +++ b/arch/ppc64/kernel/setup.c @@ -41,7 +41,6 @@ #include <asm/smp.h> #include <asm/elf.h> #include <asm/machdep.h> -#include <asm/iSeries/LparData.h> #include <asm/paca.h> #include <asm/ppcdebug.h> #include <asm/time.h> @@ -57,6 +56,8 @@ #include <asm/cache.h> #include <asm/page.h> #include <asm/mmu.h> +#include <asm/lmb.h> +#include <asm/iSeries/ItLpNaca.h> #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -103,11 +104,6 @@ extern void unflatten_device_tree(void); extern void smp_release_cpus(void); -unsigned long decr_overclock = 1; -unsigned long decr_overclock_proc0 = 1; -unsigned long decr_overclock_set = 0; -unsigned long decr_overclock_proc0_set = 0; - int have_of = 1; int boot_cpuid = 0; int boot_cpuid_phys = 0; @@ -1120,64 +1116,15 @@ void ppc64_dump_msg(unsigned int src, const char *msg) printk("[dump]%04x %s\n", src, msg); } -int set_spread_lpevents( char * str ) -{ - /* The parameter is the number of processors to share in processing lp events */ - unsigned long i; - unsigned long val = simple_strtoul( str, NULL, 0 ); - if ( ( val > 0 ) && ( val <= NR_CPUS ) ) { - for ( i=1; i<val; ++i ) - paca[i].lpqueue_ptr = paca[0].lpqueue_ptr; - printk("lpevent processing spread over %ld processors\n", val); - } - else - printk("invalid spreaqd_lpevents %ld\n", val); - return 1; -} - /* This should only be called on processor 0 during calibrate decr */ void setup_default_decr(void) { struct paca_struct *lpaca = get_paca(); - if ( decr_overclock_set && !decr_overclock_proc0_set ) - decr_overclock_proc0 = decr_overclock; - - lpaca->default_decr = tb_ticks_per_jiffy / decr_overclock_proc0; + lpaca->default_decr = tb_ticks_per_jiffy; lpaca->next_jiffy_update_tb = get_tb() + tb_ticks_per_jiffy; } -int set_decr_overclock_proc0( char * str ) -{ - unsigned long val = simple_strtoul( str, NULL, 0 ); - if ( ( val >= 1 ) && ( val <= 48 ) ) { - decr_overclock_proc0_set = 1; - decr_overclock_proc0 = val; - printk("proc 0 decrementer overclock factor of %ld\n", val); - } - else - printk("invalid proc 0 decrementer overclock factor of %ld\n", val); - return 1; -} - -int set_decr_overclock( char * str ) -{ - unsigned long val = simple_strtoul( str, NULL, 0 ); - if ( ( val >= 1 ) && ( val <= 48 ) ) { - decr_overclock_set = 1; - decr_overclock = val; - printk("decrementer overclock factor of %ld\n", val); - } - else - printk("invalid decrementer overclock factor of %ld\n", val); - return 1; - -} - -__setup("spread_lpevents=", set_spread_lpevents ); -__setup("decr_overclock_proc0=", set_decr_overclock_proc0 ); -__setup("decr_overclock=", set_decr_overclock ); - #ifndef CONFIG_PPC_ISERIES /* * This function can be used by platforms to "find" legacy serial ports. diff --git a/arch/ppc64/kernel/smp.c b/arch/ppc64/kernel/smp.c index 3b906cd9403..9ef5d36d6b2 100644 --- a/arch/ppc64/kernel/smp.c +++ b/arch/ppc64/kernel/smp.c @@ -334,7 +334,6 @@ void smp_call_function_interrupt(void) } } -extern unsigned long decr_overclock; extern struct gettimeofday_struct do_gtod; struct thread_info *current_set[NR_CPUS]; @@ -491,7 +490,7 @@ int __devinit __cpu_up(unsigned int cpu) if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu)) return -EINVAL; - paca[cpu].default_decr = tb_ticks_per_jiffy / decr_overclock; + paca[cpu].default_decr = tb_ticks_per_jiffy; if (!cpu_has_feature(CPU_FTR_SLB)) { void *tmp; diff --git a/arch/ppc64/kernel/sys_ppc32.c b/arch/ppc64/kernel/sys_ppc32.c index 7cf7a960002..118436e8085 100644 --- a/arch/ppc64/kernel/sys_ppc32.c +++ b/arch/ppc64/kernel/sys_ppc32.c @@ -741,6 +741,7 @@ asmlinkage int sys32_pciconfig_write(u32 bus, u32 dfn, u32 off, u32 len, u32 ubu asmlinkage int sys32_pciconfig_iobase(u32 which, u32 in_bus, u32 in_devfn) { +#ifdef CONFIG_PCI struct pci_controller* hose; struct list_head *ln; struct pci_bus *bus = NULL; @@ -786,36 +787,11 @@ asmlinkage int sys32_pciconfig_iobase(u32 which, u32 in_bus, u32 in_devfn) case IOBASE_ISA_MEM: return -EINVAL; } - +#endif /* CONFIG_PCI */ return -EOPNOTSUPP; } -asmlinkage int ppc64_newuname(struct new_utsname __user * name) -{ - int errno = sys_newuname(name); - - if (current->personality == PER_LINUX32 && !errno) { - if(copy_to_user(name->machine, "ppc\0\0", 8)) { - errno = -EFAULT; - } - } - return errno; -} - -asmlinkage int ppc64_personality(unsigned long personality) -{ - int ret; - if (current->personality == PER_LINUX32 && personality == PER_LINUX) - personality = PER_LINUX32; - ret = sys_personality(personality); - if (ret == PER_LINUX32) - ret = PER_LINUX; - return ret; -} - - - /* Note: it is necessary to treat mode as an unsigned int, * with the corresponding cast to a signed int to insure that the * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode) @@ -1158,26 +1134,47 @@ asmlinkage long sys32_sysctl(struct __sysctl_args32 __user *args) } #endif +asmlinkage int sys32_uname(struct old_utsname __user * name) +{ + int err = 0; + + down_read(&uts_sem); + if (copy_to_user(name, &system_utsname, sizeof(*name))) + err = -EFAULT; + up_read(&uts_sem); + if (!err && personality(current->personality) == PER_LINUX32) { + /* change "ppc64" to "ppc" */ + if (__put_user(0, name->machine + 3) + || __put_user(0, name->machine + 4)) + err = -EFAULT; + } + return err; +} + asmlinkage int sys32_olduname(struct oldold_utsname __user * name) { int error; - - if (!name) - return -EFAULT; + if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname))) return -EFAULT; down_read(&uts_sem); error = __copy_to_user(&name->sysname,&system_utsname.sysname,__OLD_UTS_LEN); - error -= __put_user(0,name->sysname+__OLD_UTS_LEN); - error -= __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN); - error -= __put_user(0,name->nodename+__OLD_UTS_LEN); - error -= __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN); - error -= __put_user(0,name->release+__OLD_UTS_LEN); - error -= __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN); - error -= __put_user(0,name->version+__OLD_UTS_LEN); - error -= __copy_to_user(&name->machine,&system_utsname.machine,__OLD_UTS_LEN); - error = __put_user(0,name->machine+__OLD_UTS_LEN); + error |= __put_user(0,name->sysname+__OLD_UTS_LEN); + error |= __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN); + error |= __put_user(0,name->nodename+__OLD_UTS_LEN); + error |= __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN); + error |= __put_user(0,name->release+__OLD_UTS_LEN); + error |= __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN); + error |= __put_user(0,name->version+__OLD_UTS_LEN); + error |= __copy_to_user(&name->machine,&system_utsname.machine,__OLD_UTS_LEN); + error |= __put_user(0,name->machine+__OLD_UTS_LEN); + if (personality(current->personality) == PER_LINUX32) { + /* change "ppc64" to "ppc" */ + error |= __put_user(0, name->machine + 3); + error |= __put_user(0, name->machine + 4); + } + up_read(&uts_sem); error = error ? -EFAULT : 0; diff --git a/arch/ppc64/kernel/syscalls.c b/arch/ppc64/kernel/syscalls.c index f2865ff8d2f..a8cbb202b8c 100644 --- a/arch/ppc64/kernel/syscalls.c +++ b/arch/ppc64/kernel/syscalls.c @@ -199,24 +199,33 @@ out: return ret; } -static int __init set_fakeppc(char *str) +long ppc64_personality(unsigned long personality) { - if (*str) - return 0; - init_task.personality = PER_LINUX32; - return 1; + long ret; + + if (personality(current->personality) == PER_LINUX32 + && personality == PER_LINUX) + personality = PER_LINUX32; + ret = sys_personality(personality); + if (ret == PER_LINUX32) + ret = PER_LINUX; + return ret; } -__setup("fakeppc", set_fakeppc); -asmlinkage int sys_uname(struct old_utsname __user * name) +long ppc64_newuname(struct new_utsname __user * name) { - int err = -EFAULT; - + int err = 0; + down_read(&uts_sem); - if (name && !copy_to_user(name, &system_utsname, sizeof (*name))) - err = 0; + if (copy_to_user(name, &system_utsname, sizeof(*name))) + err = -EFAULT; up_read(&uts_sem); - + if (!err && personality(current->personality) == PER_LINUX32) { + /* change ppc64 to ppc */ + if (__put_user(0, name->machine + 3) + || __put_user(0, name->machine + 4)) + err = -EFAULT; + } return err; } diff --git a/arch/ppc64/kernel/sysfs.c b/arch/ppc64/kernel/sysfs.c index 0925694c3ce..c8fa6569b2f 100644 --- a/arch/ppc64/kernel/sysfs.c +++ b/arch/ppc64/kernel/sysfs.c @@ -113,7 +113,6 @@ void ppc64_enable_pmcs(void) #ifdef CONFIG_PPC_PSERIES unsigned long set, reset; int ret; - unsigned int ctrl; #endif /* CONFIG_PPC_PSERIES */ /* Only need to enable them once */ @@ -167,11 +166,8 @@ void ppc64_enable_pmcs(void) * On SMT machines we have to set the run latch in the ctrl register * in order to make PMC6 spin. */ - if (cpu_has_feature(CPU_FTR_SMT)) { - ctrl = mfspr(CTRLF); - ctrl |= RUNLATCH; - mtspr(CTRLT, ctrl); - } + if (cpu_has_feature(CPU_FTR_SMT)) + ppc64_runlatch_on(); #endif /* CONFIG_PPC_PSERIES */ } diff --git a/arch/ppc64/kernel/time.c b/arch/ppc64/kernel/time.c index 772a465b49f..33364a7d2cd 100644 --- a/arch/ppc64/kernel/time.c +++ b/arch/ppc64/kernel/time.c @@ -325,9 +325,7 @@ int timer_interrupt(struct pt_regs * regs) irq_enter(); -#ifndef CONFIG_PPC_ISERIES profile_tick(CPU_PROFILING, regs); -#endif lpaca->lppaca.int_dword.fields.decr_int = 0; @@ -515,6 +513,7 @@ void __init time_init(void) do_gtod.varp = &do_gtod.vars[0]; do_gtod.var_idx = 0; do_gtod.varp->tb_orig_stamp = tb_last_stamp; + get_paca()->next_jiffy_update_tb = tb_last_stamp + tb_ticks_per_jiffy; do_gtod.varp->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC; do_gtod.tb_ticks_per_sec = tb_ticks_per_sec; do_gtod.varp->tb_to_xs = tb_to_xs; diff --git a/arch/ppc64/kernel/vio.c b/arch/ppc64/kernel/vio.c index cdd830cb276..0c0ba71ac0e 100644 --- a/arch/ppc64/kernel/vio.c +++ b/arch/ppc64/kernel/vio.c @@ -41,20 +41,25 @@ static const struct vio_device_id *vio_match_device( static struct iommu_table *vio_build_iommu_table(struct vio_dev *); static int vio_num_address_cells; #endif -static struct vio_dev *vio_bus_device; /* fake "parent" device */ - #ifdef CONFIG_PPC_ISERIES -static struct vio_dev *__init vio_register_device_iseries(char *type, - uint32_t unit_num); - static struct iommu_table veth_iommu_table; static struct iommu_table vio_iommu_table; - -static struct vio_dev _vio_dev = { +#endif +static struct vio_dev vio_bus_device = { /* fake "parent" device */ + .name = vio_bus_device.dev.bus_id, + .type = "", +#ifdef CONFIG_PPC_ISERIES .iommu_table = &vio_iommu_table, - .dev.bus = &vio_bus_type +#endif + .dev.bus_id = "vio", + .dev.bus = &vio_bus_type, }; -struct device *iSeries_vio_dev = &_vio_dev.dev; + +#ifdef CONFIG_PPC_ISERIES +static struct vio_dev *__init vio_register_device_iseries(char *type, + uint32_t unit_num); + +struct device *iSeries_vio_dev = &vio_bus_device.dev; EXPORT_SYMBOL(iSeries_vio_dev); #define device_is_compatible(a, b) 1 @@ -260,18 +265,10 @@ static int __init vio_bus_init(void) } /* the fake parent of all vio devices, just to give us a nice directory */ - vio_bus_device = kmalloc(sizeof(struct vio_dev), GFP_KERNEL); - if (!vio_bus_device) { - return 1; - } - memset(vio_bus_device, 0, sizeof(struct vio_dev)); - strcpy(vio_bus_device->dev.bus_id, "vio"); - - err = device_register(&vio_bus_device->dev); + err = device_register(&vio_bus_device.dev); if (err) { printk(KERN_WARNING "%s: device_register returned %i\n", __FUNCTION__, err); - kfree(vio_bus_device); return err; } @@ -300,7 +297,7 @@ static void __devinit vio_dev_release(struct device *dev) } #ifdef CONFIG_PPC_PSERIES -static ssize_t viodev_show_devspec(struct device *dev, char *buf) +static ssize_t viodev_show_devspec(struct device *dev, struct device_attribute *attr, char *buf) { struct device_node *of_node = dev->platform_data; @@ -309,7 +306,7 @@ static ssize_t viodev_show_devspec(struct device *dev, char *buf) DEVICE_ATTR(devspec, S_IRUSR | S_IRGRP | S_IROTH, viodev_show_devspec, NULL); #endif -static ssize_t viodev_show_name(struct device *dev, char *buf) +static ssize_t viodev_show_name(struct device *dev, struct device_attribute *attr, char *buf) { return sprintf(buf, "%s\n", to_vio_dev(dev)->name); } @@ -326,7 +323,7 @@ static struct vio_dev * __devinit vio_register_device_common( viodev->unit_address = unit_address; viodev->iommu_table = iommu_table; /* init generic 'struct device' fields: */ - viodev->dev.parent = &vio_bus_device->dev; + viodev->dev.parent = &vio_bus_device.dev; viodev->dev.bus = &vio_bus_type; viodev->dev.release = vio_dev_release; @@ -636,5 +633,3 @@ struct bus_type vio_bus_type = { .name = "vio", .match = vio_bus_match, }; - -EXPORT_SYMBOL(vio_bus_type); diff --git a/arch/ppc64/kernel/viopath.c b/arch/ppc64/kernel/viopath.c index 2ed8ee07568..2a6c4f01c45 100644 --- a/arch/ppc64/kernel/viopath.c +++ b/arch/ppc64/kernel/viopath.c @@ -43,12 +43,10 @@ #include <asm/system.h> #include <asm/uaccess.h> #include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/LparData.h> +#include <asm/iSeries/ItExtVpdPanel.h> #include <asm/iSeries/HvLpEvent.h> #include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/HvCallCfg.h> #include <asm/iSeries/mf.h> -#include <asm/iSeries/iSeries_proc.h> #include <asm/iSeries/vio.h> /* Status of the path to each other partition in the system. @@ -365,7 +363,7 @@ void vio_set_hostlp(void) * while we're active */ viopath_ourLp = HvLpConfig_getLpIndex(); - viopath_hostLp = HvCallCfg_getHostingLpIndex(viopath_ourLp); + viopath_hostLp = HvLpConfig_getHostingLpIndex(viopath_ourLp); if (viopath_hostLp != HvLpIndexInvalid) vio_setHandler(viomajorsubtype_config, handleConfig); @@ -487,7 +485,7 @@ int viopath_open(HvLpIndex remoteLp, int subtype, int numReq) unsigned long flags; int tempNumAllocated; - if ((remoteLp >= HvMaxArchitectedLps) || (remoteLp == HvLpIndexInvalid)) + if ((remoteLp >= HVMAXARCHITECTEDLPS) || (remoteLp == HvLpIndexInvalid)) return -EINVAL; subtype = subtype >> VIOMAJOR_SUBTYPE_SHIFT; @@ -558,7 +556,7 @@ int viopath_close(HvLpIndex remoteLp, int subtype, int numReq) int numOpen; struct alloc_parms parms; - if ((remoteLp >= HvMaxArchitectedLps) || (remoteLp == HvLpIndexInvalid)) + if ((remoteLp >= HVMAXARCHITECTEDLPS) || (remoteLp == HvLpIndexInvalid)) return -EINVAL; subtype = subtype >> VIOMAJOR_SUBTYPE_SHIFT; diff --git a/arch/ppc64/lib/Makefile b/arch/ppc64/lib/Makefile index bf7b5bbfc04..76fbfa9f706 100644 --- a/arch/ppc64/lib/Makefile +++ b/arch/ppc64/lib/Makefile @@ -12,7 +12,7 @@ lib-$(CONFIG_SMP) += locks.o # e2a provides EBCDIC to ASCII conversions. ifdef CONFIG_PPC_ISERIES -obj-$(CONFIG_PCI) += e2a.o +obj-y += e2a.o endif lib-$(CONFIG_DEBUG_KERNEL) += sstep.o diff --git a/arch/ppc64/mm/hash_utils.c b/arch/ppc64/mm/hash_utils.c index 0a0f97008d0..1647b1c6f28 100644 --- a/arch/ppc64/mm/hash_utils.c +++ b/arch/ppc64/mm/hash_utils.c @@ -195,7 +195,7 @@ void __init htab_initialize(void) memset((void *)table, 0, htab_size_bytes); } - mode_rw = _PAGE_ACCESSED | _PAGE_COHERENT | PP_RWXX; + mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX; /* On U3 based machines, we need to reserve the DART area and * _NOT_ map it to avoid cache paradoxes as it's remapped non @@ -310,10 +310,6 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) vsid = get_vsid(mm->context.id, ea); break; - case IO_REGION_ID: - mm = &ioremap_mm; - vsid = get_kernel_vsid(ea); - break; case VMALLOC_REGION_ID: mm = &init_mm; vsid = get_kernel_vsid(ea); diff --git a/arch/ppc64/mm/hugetlbpage.c b/arch/ppc64/mm/hugetlbpage.c index d3bf86a5c1a..fdcfe97c75c 100644 --- a/arch/ppc64/mm/hugetlbpage.c +++ b/arch/ppc64/mm/hugetlbpage.c @@ -121,7 +121,7 @@ static pte_t *hugepte_alloc(struct mm_struct *mm, pud_t *dir, unsigned long addr return hugepte_offset(dir, addr); } -static pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) +pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) { pud_t *pud; @@ -134,7 +134,7 @@ static pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) return hugepte_offset(pud, addr); } -static pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) +pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) { pud_t *pud; @@ -147,25 +147,6 @@ static pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) return hugepte_alloc(mm, pud, addr); } -static void set_huge_pte(struct mm_struct *mm, struct vm_area_struct *vma, - unsigned long addr, struct page *page, - pte_t *ptep, int write_access) -{ - pte_t entry; - - add_mm_counter(mm, rss, HPAGE_SIZE / PAGE_SIZE); - if (write_access) { - entry = - pte_mkwrite(pte_mkdirty(mk_pte(page, vma->vm_page_prot))); - } else { - entry = pte_wrprotect(mk_pte(page, vma->vm_page_prot)); - } - entry = pte_mkyoung(entry); - entry = pte_mkhuge(entry); - - set_pte_at(mm, addr, ptep, entry); -} - /* * This function checks for proper alignment of input addr and len parameters. */ @@ -259,80 +240,6 @@ int prepare_hugepage_range(unsigned long addr, unsigned long len) return -EINVAL; } -int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src, - struct vm_area_struct *vma) -{ - pte_t *src_pte, *dst_pte, entry; - struct page *ptepage; - unsigned long addr = vma->vm_start; - unsigned long end = vma->vm_end; - int err = -ENOMEM; - - while (addr < end) { - dst_pte = huge_pte_alloc(dst, addr); - if (!dst_pte) - goto out; - - src_pte = huge_pte_offset(src, addr); - entry = *src_pte; - - ptepage = pte_page(entry); - get_page(ptepage); - add_mm_counter(dst, rss, HPAGE_SIZE / PAGE_SIZE); - set_pte_at(dst, addr, dst_pte, entry); - - addr += HPAGE_SIZE; - } - - err = 0; - out: - return err; -} - -int -follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma, - struct page **pages, struct vm_area_struct **vmas, - unsigned long *position, int *length, int i) -{ - unsigned long vpfn, vaddr = *position; - int remainder = *length; - - WARN_ON(!is_vm_hugetlb_page(vma)); - - vpfn = vaddr/PAGE_SIZE; - while (vaddr < vma->vm_end && remainder) { - if (pages) { - pte_t *pte; - struct page *page; - - pte = huge_pte_offset(mm, vaddr); - - /* hugetlb should be locked, and hence, prefaulted */ - WARN_ON(!pte || pte_none(*pte)); - - page = &pte_page(*pte)[vpfn % (HPAGE_SIZE/PAGE_SIZE)]; - - WARN_ON(!PageCompound(page)); - - get_page(page); - pages[i] = page; - } - - if (vmas) - vmas[i] = vma; - - vaddr += PAGE_SIZE; - ++vpfn; - --remainder; - ++i; - } - - *length = remainder; - *position = vaddr; - - return i; -} - struct page * follow_huge_addr(struct mm_struct *mm, unsigned long address, int write) { @@ -363,89 +270,6 @@ follow_huge_pmd(struct mm_struct *mm, unsigned long address, return NULL; } -void unmap_hugepage_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) -{ - struct mm_struct *mm = vma->vm_mm; - unsigned long addr; - pte_t *ptep; - struct page *page; - - WARN_ON(!is_vm_hugetlb_page(vma)); - BUG_ON((start % HPAGE_SIZE) != 0); - BUG_ON((end % HPAGE_SIZE) != 0); - - for (addr = start; addr < end; addr += HPAGE_SIZE) { - pte_t pte; - - ptep = huge_pte_offset(mm, addr); - if (!ptep || pte_none(*ptep)) - continue; - - pte = *ptep; - page = pte_page(pte); - pte_clear(mm, addr, ptep); - - put_page(page); - } - add_mm_counter(mm, rss, -((end - start) >> PAGE_SHIFT)); - flush_tlb_pending(); -} - -int hugetlb_prefault(struct address_space *mapping, struct vm_area_struct *vma) -{ - struct mm_struct *mm = current->mm; - unsigned long addr; - int ret = 0; - - WARN_ON(!is_vm_hugetlb_page(vma)); - BUG_ON((vma->vm_start % HPAGE_SIZE) != 0); - BUG_ON((vma->vm_end % HPAGE_SIZE) != 0); - - spin_lock(&mm->page_table_lock); - for (addr = vma->vm_start; addr < vma->vm_end; addr += HPAGE_SIZE) { - unsigned long idx; - pte_t *pte = huge_pte_alloc(mm, addr); - struct page *page; - - if (!pte) { - ret = -ENOMEM; - goto out; - } - if (! pte_none(*pte)) - continue; - - idx = ((addr - vma->vm_start) >> HPAGE_SHIFT) - + (vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT)); - page = find_get_page(mapping, idx); - if (!page) { - /* charge the fs quota first */ - if (hugetlb_get_quota(mapping)) { - ret = -ENOMEM; - goto out; - } - page = alloc_huge_page(); - if (!page) { - hugetlb_put_quota(mapping); - ret = -ENOMEM; - goto out; - } - ret = add_to_page_cache(page, mapping, idx, GFP_ATOMIC); - if (! ret) { - unlock_page(page); - } else { - hugetlb_put_quota(mapping); - free_huge_page(page); - goto out; - } - } - set_huge_pte(mm, vma, addr, page, pte, vma->vm_flags & VM_WRITE); - } -out: - spin_unlock(&mm->page_table_lock); - return ret; -} - /* Because we have an exclusive hugepage region which lies within the * normal user address space, we have to take special measures to make * non-huge mmap()s evade the hugepage reserved regions. */ @@ -468,7 +292,12 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, && !is_hugepage_only_range(mm, addr,len)) return addr; } - start_addr = addr = mm->free_area_cache; + if (len > mm->cached_hole_size) { + start_addr = addr = mm->free_area_cache; + } else { + start_addr = addr = TASK_UNMAPPED_BASE; + mm->cached_hole_size = 0; + } full_search: vma = find_vma(mm, addr); @@ -492,6 +321,8 @@ full_search: mm->free_area_cache = addr + len; return addr; } + if (addr + mm->cached_hole_size < vma->vm_start) + mm->cached_hole_size = vma->vm_start - addr; addr = vma->vm_end; vma = vma->vm_next; } @@ -499,6 +330,7 @@ full_search: /* Make sure we didn't miss any holes */ if (start_addr != TASK_UNMAPPED_BASE) { start_addr = addr = TASK_UNMAPPED_BASE; + mm->cached_hole_size = 0; goto full_search; } return -ENOMEM; @@ -520,6 +352,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, struct vm_area_struct *vma, *prev_vma; struct mm_struct *mm = current->mm; unsigned long base = mm->mmap_base, addr = addr0; + unsigned long largest_hole = mm->cached_hole_size; int first_time = 1; /* requested length too big for entire address space */ @@ -540,6 +373,10 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, return addr; } + if (len <= largest_hole) { + largest_hole = 0; + mm->free_area_cache = base; + } try_again: /* make sure it can fit in the remaining address space */ if (mm->free_area_cache < len) @@ -568,13 +405,21 @@ hugepage_recheck: * vma->vm_start, use it: */ if (addr+len <= vma->vm_start && - (!prev_vma || (addr >= prev_vma->vm_end))) + (!prev_vma || (addr >= prev_vma->vm_end))) { /* remember the address as a hint for next time */ - return (mm->free_area_cache = addr); - else + mm->cached_hole_size = largest_hole; + return (mm->free_area_cache = addr); + } else { /* pull free_area_cache down to the first hole */ - if (mm->free_area_cache == vma->vm_end) + if (mm->free_area_cache == vma->vm_end) { mm->free_area_cache = vma->vm_start; + mm->cached_hole_size = largest_hole; + } + } + + /* remember the largest hole we saw so far */ + if (addr + largest_hole < vma->vm_start) + largest_hole = vma->vm_start - addr; /* try just below the current vma->vm_start */ addr = vma->vm_start-len; @@ -587,6 +432,7 @@ fail: */ if (first_time) { mm->free_area_cache = base; + largest_hole = 0; first_time = 0; goto try_again; } @@ -597,11 +443,13 @@ fail: * allocations. */ mm->free_area_cache = TASK_UNMAPPED_BASE; + mm->cached_hole_size = ~0UL; addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags); /* * Restore the topdown base: */ mm->free_area_cache = base; + mm->cached_hole_size = ~0UL; return addr; } diff --git a/arch/ppc64/mm/imalloc.c b/arch/ppc64/mm/imalloc.c index cb8727f3267..b6e75b891ac 100644 --- a/arch/ppc64/mm/imalloc.c +++ b/arch/ppc64/mm/imalloc.c @@ -15,6 +15,7 @@ #include <asm/pgtable.h> #include <asm/semaphore.h> #include <asm/imalloc.h> +#include <asm/cacheflush.h> static DECLARE_MUTEX(imlist_sem); struct vm_struct * imlist = NULL; @@ -285,29 +286,32 @@ struct vm_struct * im_get_area(unsigned long v_addr, unsigned long size, return area; } -unsigned long im_free(void * addr) +void im_free(void * addr) { struct vm_struct **p, *tmp; - unsigned long ret_size = 0; if (!addr) - return ret_size; - if ((PAGE_SIZE-1) & (unsigned long) addr) { + return; + if ((unsigned long) addr & ~PAGE_MASK) { printk(KERN_ERR "Trying to %s bad address (%p)\n", __FUNCTION__, addr); - return ret_size; + return; } down(&imlist_sem); for (p = &imlist ; (tmp = *p) ; p = &tmp->next) { if (tmp->addr == addr) { - ret_size = tmp->size; *p = tmp->next; + + /* XXX: do we need the lock? */ + spin_lock(&init_mm.page_table_lock); + unmap_vm_area(tmp); + spin_unlock(&init_mm.page_table_lock); + kfree(tmp); up(&imlist_sem); - return ret_size; + return; } } up(&imlist_sem); printk(KERN_ERR "Trying to %s nonexistent area (%p)\n", __FUNCTION__, addr); - return ret_size; } diff --git a/arch/ppc64/mm/init.c b/arch/ppc64/mm/init.c index 4b42aff74d7..6fa1e6490b5 100644 --- a/arch/ppc64/mm/init.c +++ b/arch/ppc64/mm/init.c @@ -73,9 +73,6 @@ static unsigned long phbs_io_bot = PHBS_IO_BASE; extern pgd_t swapper_pg_dir[]; extern struct task_struct *current_set[NR_CPUS]; -extern pgd_t ioremap_dir[]; -pgd_t * ioremap_pgd = (pgd_t *)&ioremap_dir; - unsigned long klimit = (unsigned long)_end; unsigned long _SDR1=0; @@ -137,69 +134,6 @@ void iounmap(volatile void __iomem *addr) #else -static void unmap_im_area_pte(pmd_t *pmd, unsigned long addr, - unsigned long end) -{ - pte_t *pte; - - pte = pte_offset_kernel(pmd, addr); - do { - pte_t ptent = ptep_get_and_clear(&ioremap_mm, addr, pte); - WARN_ON(!pte_none(ptent) && !pte_present(ptent)); - } while (pte++, addr += PAGE_SIZE, addr != end); -} - -static inline void unmap_im_area_pmd(pud_t *pud, unsigned long addr, - unsigned long end) -{ - pmd_t *pmd; - unsigned long next; - - pmd = pmd_offset(pud, addr); - do { - next = pmd_addr_end(addr, end); - if (pmd_none_or_clear_bad(pmd)) - continue; - unmap_im_area_pte(pmd, addr, next); - } while (pmd++, addr = next, addr != end); -} - -static inline void unmap_im_area_pud(pgd_t *pgd, unsigned long addr, - unsigned long end) -{ - pud_t *pud; - unsigned long next; - - pud = pud_offset(pgd, addr); - do { - next = pud_addr_end(addr, end); - if (pud_none_or_clear_bad(pud)) - continue; - unmap_im_area_pmd(pud, addr, next); - } while (pud++, addr = next, addr != end); -} - -static void unmap_im_area(unsigned long addr, unsigned long end) -{ - struct mm_struct *mm = &ioremap_mm; - unsigned long next; - pgd_t *pgd; - - spin_lock(&mm->page_table_lock); - - pgd = pgd_offset_i(addr); - flush_cache_vunmap(addr, end); - do { - next = pgd_addr_end(addr, end); - if (pgd_none_or_clear_bad(pgd)) - continue; - unmap_im_area_pud(pgd, addr, next); - } while (pgd++, addr = next, addr != end); - flush_tlb_kernel_range(start, end); - - spin_unlock(&mm->page_table_lock); -} - /* * map_io_page currently only called by __ioremap * map_io_page adds an entry to the ioremap page table @@ -214,21 +148,21 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags) unsigned long vsid; if (mem_init_done) { - spin_lock(&ioremap_mm.page_table_lock); - pgdp = pgd_offset_i(ea); - pudp = pud_alloc(&ioremap_mm, pgdp, ea); + spin_lock(&init_mm.page_table_lock); + pgdp = pgd_offset_k(ea); + pudp = pud_alloc(&init_mm, pgdp, ea); if (!pudp) return -ENOMEM; - pmdp = pmd_alloc(&ioremap_mm, pudp, ea); + pmdp = pmd_alloc(&init_mm, pudp, ea); if (!pmdp) return -ENOMEM; - ptep = pte_alloc_kernel(&ioremap_mm, pmdp, ea); + ptep = pte_alloc_kernel(&init_mm, pmdp, ea); if (!ptep) return -ENOMEM; pa = abs_to_phys(pa); - set_pte_at(&ioremap_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT, + set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags))); - spin_unlock(&ioremap_mm.page_table_lock); + spin_unlock(&init_mm.page_table_lock); } else { unsigned long va, vpn, hash, hpteg; @@ -267,13 +201,9 @@ static void __iomem * __ioremap_com(unsigned long addr, unsigned long pa, for (i = 0; i < size; i += PAGE_SIZE) if (map_io_page(ea+i, pa+i, flags)) - goto failure; + return NULL; return (void __iomem *) (ea + (addr & ~PAGE_MASK)); - failure: - if (mem_init_done) - unmap_im_area(ea, ea + size); - return NULL; } @@ -381,19 +311,14 @@ int __ioremap_explicit(unsigned long pa, unsigned long ea, */ void iounmap(volatile void __iomem *token) { - unsigned long address, size; void *addr; if (!mem_init_done) return; addr = (void *) ((unsigned long __force) token & PAGE_MASK); - - if ((size = im_free(addr)) == 0) - return; - address = (unsigned long)addr; - unmap_im_area(address, address + size); + im_free(addr); } static int iounmap_subset_regions(unsigned long addr, unsigned long size) diff --git a/arch/ppc64/xmon/xmon.c b/arch/ppc64/xmon/xmon.c index 3c0ccb2623a..7f6e13a4b71 100644 --- a/arch/ppc64/xmon/xmon.c +++ b/arch/ppc64/xmon/xmon.c @@ -2247,7 +2247,14 @@ scanhex(unsigned long *vp) tmpstr[i] = c; } tmpstr[i++] = 0; - *vp = kallsyms_lookup_name(tmpstr); + *vp = 0; + if (setjmp(bus_error_jmp) == 0) { + catch_memory_errors = 1; + sync(); + *vp = kallsyms_lookup_name(tmpstr); + sync(); + } + catch_memory_errors = 0; if (!(*vp)) { printf("unknown symbol '%s'\n", tmpstr); return 0; diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index 01ae1964c93..c067435bae4 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -28,6 +28,7 @@ //#include <linux/kernel_stat.h> #include <linux/notifier.h> #include <linux/cpu.h> +#include <linux/workqueue.h> #include "appldata.h" @@ -133,9 +134,12 @@ static int appldata_interval = APPLDATA_CPU_INTERVAL; static int appldata_timer_active; /* - * Tasklet + * Work queue */ -static struct tasklet_struct appldata_tasklet_struct; +static struct workqueue_struct *appldata_wq; +static void appldata_work_fn(void *data); +static DECLARE_WORK(appldata_work, appldata_work_fn, NULL); + /* * Ops list @@ -144,11 +148,11 @@ static DEFINE_SPINLOCK(appldata_ops_lock); static LIST_HEAD(appldata_ops_list); -/************************* timer, tasklet, DIAG ******************************/ +/*************************** timer, work, DIAG *******************************/ /* * appldata_timer_function() * - * schedule tasklet and reschedule timer + * schedule work and reschedule timer */ static void appldata_timer_function(unsigned long data, struct pt_regs *regs) { @@ -157,22 +161,22 @@ static void appldata_timer_function(unsigned long data, struct pt_regs *regs) atomic_read(&appldata_expire_count)); if (atomic_dec_and_test(&appldata_expire_count)) { atomic_set(&appldata_expire_count, num_online_cpus()); - tasklet_schedule((struct tasklet_struct *) data); + queue_work(appldata_wq, (struct work_struct *) data); } } /* - * appldata_tasklet_function() + * appldata_work_fn() * * call data gathering function for each (active) module */ -static void appldata_tasklet_function(unsigned long data) +static void appldata_work_fn(void *data) { struct list_head *lh; struct appldata_ops *ops; int i; - P_DEBUG(" -= Tasklet =-\n"); + P_DEBUG(" -= Work Queue =-\n"); i = 0; spin_lock(&appldata_ops_lock); list_for_each(lh, &appldata_ops_list) { @@ -231,7 +235,7 @@ static int appldata_diag(char record_nr, u16 function, unsigned long buffer, : "=d" (ry) : "d" (&(appldata_parameter_list)) : "cc"); return (int) ry; } -/********************** timer, tasklet, DIAG <END> ***************************/ +/************************ timer, work, DIAG <END> ****************************/ /****************************** /proc stuff **********************************/ @@ -411,7 +415,7 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, struct list_head *lh; found = 0; - spin_lock_bh(&appldata_ops_lock); + spin_lock(&appldata_ops_lock); list_for_each(lh, &appldata_ops_list) { tmp_ops = list_entry(lh, struct appldata_ops, list); if (&tmp_ops->ctl_table[2] == ctl) { @@ -419,15 +423,15 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, } } if (!found) { - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); return -ENODEV; } ops = ctl->data; if (!try_module_get(ops->owner)) { // protect this function - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); return -ENODEV; } - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); if (!*lenp || *ppos) { *lenp = 0; @@ -451,10 +455,11 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, return -EFAULT; } - spin_lock_bh(&appldata_ops_lock); + spin_lock(&appldata_ops_lock); if ((buf[0] == '1') && (ops->active == 0)) { - if (!try_module_get(ops->owner)) { // protect tasklet - spin_unlock_bh(&appldata_ops_lock); + // protect work queue callback + if (!try_module_get(ops->owner)) { + spin_unlock(&appldata_ops_lock); module_put(ops->owner); return -ENODEV; } @@ -485,7 +490,7 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, } module_put(ops->owner); } - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); out: *lenp = len; *ppos += len; @@ -529,7 +534,7 @@ int appldata_register_ops(struct appldata_ops *ops) } memset(ops->ctl_table, 0, 4*sizeof(struct ctl_table)); - spin_lock_bh(&appldata_ops_lock); + spin_lock(&appldata_ops_lock); list_for_each(lh, &appldata_ops_list) { tmp_ops = list_entry(lh, struct appldata_ops, list); P_DEBUG("register_ops loop: %i) name = %s, ctl = %i\n", @@ -541,18 +546,18 @@ int appldata_register_ops(struct appldata_ops *ops) APPLDATA_PROC_NAME_LENGTH) == 0) { P_ERROR("Name \"%s\" already registered!\n", ops->name); kfree(ops->ctl_table); - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); return -EBUSY; } if (tmp_ops->ctl_nr == ops->ctl_nr) { P_ERROR("ctl_nr %i already registered!\n", ops->ctl_nr); kfree(ops->ctl_table); - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); return -EBUSY; } } list_add(&ops->list, &appldata_ops_list); - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); ops->ctl_table[0].ctl_name = CTL_APPLDATA; ops->ctl_table[0].procname = appldata_proc_name; @@ -583,12 +588,12 @@ int appldata_register_ops(struct appldata_ops *ops) */ void appldata_unregister_ops(struct appldata_ops *ops) { - spin_lock_bh(&appldata_ops_lock); + spin_lock(&appldata_ops_lock); unregister_sysctl_table(ops->sysctl_header); list_del(&ops->list); kfree(ops->ctl_table); ops->ctl_table = NULL; - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); P_INFO("%s-ops unregistered!\n", ops->name); } /********************** module-ops management <END> **************************/ @@ -602,7 +607,7 @@ appldata_online_cpu(int cpu) init_virt_timer(&per_cpu(appldata_timer, cpu)); per_cpu(appldata_timer, cpu).function = appldata_timer_function; per_cpu(appldata_timer, cpu).data = (unsigned long) - &appldata_tasklet_struct; + &appldata_work; atomic_inc(&appldata_expire_count); spin_lock(&appldata_timer_lock); __appldata_vtimer_setup(APPLDATA_MOD_TIMER); @@ -615,7 +620,7 @@ appldata_offline_cpu(int cpu) del_virt_timer(&per_cpu(appldata_timer, cpu)); if (atomic_dec_and_test(&appldata_expire_count)) { atomic_set(&appldata_expire_count, num_online_cpus()); - tasklet_schedule(&appldata_tasklet_struct); + queue_work(appldata_wq, &appldata_work); } spin_lock(&appldata_timer_lock); __appldata_vtimer_setup(APPLDATA_MOD_TIMER); @@ -648,7 +653,7 @@ static struct notifier_block __devinitdata appldata_nb = { /* * appldata_init() * - * init timer and tasklet, register /proc entries + * init timer, register /proc entries */ static int __init appldata_init(void) { @@ -657,6 +662,12 @@ static int __init appldata_init(void) P_DEBUG("sizeof(parameter_list) = %lu\n", sizeof(struct appldata_parameter_list)); + appldata_wq = create_singlethread_workqueue("appldata"); + if (!appldata_wq) { + P_ERROR("Could not create work queue\n"); + return -ENOMEM; + } + for_each_online_cpu(i) appldata_online_cpu(i); @@ -670,7 +681,6 @@ static int __init appldata_init(void) appldata_table[1].de->owner = THIS_MODULE; #endif - tasklet_init(&appldata_tasklet_struct, appldata_tasklet_function, 0); P_DEBUG("Base interface initialized.\n"); return 0; } @@ -678,7 +688,7 @@ static int __init appldata_init(void) /* * appldata_exit() * - * stop timer and tasklet, unregister /proc entries + * stop timer, unregister /proc entries */ static void __exit appldata_exit(void) { @@ -690,7 +700,7 @@ static void __exit appldata_exit(void) /* * ops list should be empty, but just in case something went wrong... */ - spin_lock_bh(&appldata_ops_lock); + spin_lock(&appldata_ops_lock); list_for_each(lh, &appldata_ops_list) { ops = list_entry(lh, struct appldata_ops, list); rc = appldata_diag(ops->record_nr, APPLDATA_STOP_REC, @@ -700,7 +710,7 @@ static void __exit appldata_exit(void) "return code: %d\n", ops->name, rc); } } - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); for_each_online_cpu(i) appldata_offline_cpu(i); @@ -709,7 +719,7 @@ static void __exit appldata_exit(void) unregister_sysctl_table(appldata_sysctl_header); - tasklet_kill(&appldata_tasklet_struct); + destroy_workqueue(appldata_wq); P_DEBUG("... module unloaded!\n"); } /**************************** init / exit <END> ******************************/ diff --git a/arch/s390/appldata/appldata_mem.c b/arch/s390/appldata/appldata_mem.c index 462ee9a84e7..f0e2fbed3d4 100644 --- a/arch/s390/appldata/appldata_mem.c +++ b/arch/s390/appldata/appldata_mem.c @@ -68,7 +68,7 @@ struct appldata_mem_data { u64 pgmajfault; /* page faults (major only) */ // <-- New in 2.6 -} appldata_mem_data; +} __attribute__((packed)) appldata_mem_data; static inline void appldata_debug_print(struct appldata_mem_data *mem_data) diff --git a/arch/s390/appldata/appldata_net_sum.c b/arch/s390/appldata/appldata_net_sum.c index dd61638d302..2a4c7432db4 100644 --- a/arch/s390/appldata/appldata_net_sum.c +++ b/arch/s390/appldata/appldata_net_sum.c @@ -57,7 +57,7 @@ struct appldata_net_sum_data { u64 rx_dropped; /* no space in linux buffers */ u64 tx_dropped; /* no space available in linux */ u64 collisions; /* collisions while transmitting */ -} appldata_net_sum_data; +} __attribute__((packed)) appldata_net_sum_data; static inline void appldata_print_debug(struct appldata_net_sum_data *net_data) diff --git a/arch/s390/appldata/appldata_os.c b/arch/s390/appldata/appldata_os.c index b83f0748455..e0a476bf4fd 100644 --- a/arch/s390/appldata/appldata_os.c +++ b/arch/s390/appldata/appldata_os.c @@ -49,7 +49,7 @@ struct appldata_os_per_cpu { u32 per_cpu_softirq; /* ... spent in softirqs */ u32 per_cpu_iowait; /* ... spent while waiting for I/O */ // <-- New in 2.6 -}; +} __attribute__((packed)); struct appldata_os_data { u64 timestamp; @@ -75,7 +75,7 @@ struct appldata_os_data { /* per cpu data */ struct appldata_os_per_cpu os_cpu[0]; -}; +} __attribute__((packed)); static struct appldata_os_data *appldata_os_data; diff --git a/arch/s390/kernel/compat_ioctl.c b/arch/s390/kernel/compat_ioctl.c index 03d03c6d3cb..24a1e9f069a 100644 --- a/arch/s390/kernel/compat_ioctl.c +++ b/arch/s390/kernel/compat_ioctl.c @@ -42,7 +42,6 @@ struct ioctl_trans ioctl_start[] = { #include "../../../fs/compat_ioctl.c" /* s390 only ioctls */ -#if defined(CONFIG_DASD) || defined(CONFIG_DASD_MODULE) COMPATIBLE_IOCTL(DASDAPIVER) COMPATIBLE_IOCTL(BIODASDDISABLE) COMPATIBLE_IOCTL(BIODASDENABLE) @@ -59,16 +58,11 @@ COMPATIBLE_IOCTL(BIODASDPRRD) COMPATIBLE_IOCTL(BIODASDPSRD) COMPATIBLE_IOCTL(BIODASDGATTR) COMPATIBLE_IOCTL(BIODASDSATTR) -#if defined(CONFIG_DASD_CMB) || defined(CONFIG_DASD_CMB_MODULE) COMPATIBLE_IOCTL(BIODASDCMFENABLE) COMPATIBLE_IOCTL(BIODASDCMFDISABLE) COMPATIBLE_IOCTL(BIODASDREADALLCMB) -#endif -#endif -#if defined(CONFIG_S390_TAPE) || defined(CONFIG_S390_TAPE_MODULE) COMPATIBLE_IOCTL(TAPE390_DISPLAY) -#endif /* s390 doesn't need handlers here */ COMPATIBLE_IOCTL(TIOCGSERIAL) diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index b804c55bd91..fc8bf5e285f 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -345,10 +345,25 @@ iplstart: bno .Lnoreset la %r2,.Lreset lhi %r3,26 - .long 0x83230008 + diag %r2,%r3,8 + mvc 0x78(8),.Lrdrnewpsw # set up IO interrupt psw +.Lwaitrdrirq: + lpsw .Lrdrwaitpsw +.Lrdrint: + c %r1,0xb8 # compare subchannel number + bne .Lwaitrdrirq + la %r5,.Lirb + tsch 0(%r5) .Lnoreset: + b .Lnoload + + .align 8 +.Lrdrnewpsw: + .long 0x00080000,0x80000000+.Lrdrint +.Lrdrwaitpsw: + .long 0x020a0000,0x80000000+.Lrdrint #endif - + # # everything loaded, go for it # @@ -517,10 +532,10 @@ startup:basr %r13,0 # get base l %r2, .Lrcp2-.LPG1(%r13) # try with Read SCP b .Lservicecall-.LPG1(%r13) .Lprocsccb: - lh %r1,.Lscpincr1-PARMAREA(%r4) # use this one if != 0 - chi %r1,0x00 - jne .Lscnd - l %r1,.Lscpincr2-PARMAREA(%r4) # otherwise use this one + lhi %r1,0 + icm %r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0 + jnz .Lscnd + l %r1,.Lscpincr2-PARMAREA+4(%r4) # otherwise use this one .Lscnd: xr %r3,%r3 # same logic ic %r3,.Lscpa1-PARMAREA(%r4) diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index 8366793bc37..f525c0c2125 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -344,10 +344,25 @@ iplstart: bno .Lnoreset la %r2,.Lreset lhi %r3,26 - .long 0x83230008 + diag %r2,%r3,8 + mvc 0x78(8),.Lrdrnewpsw # set up IO interrupt psw +.Lwaitrdrirq: + lpsw .Lrdrwaitpsw +.Lrdrint: + c %r1,0xb8 # compare subchannel number + bne .Lwaitrdrirq + la %r5,.Lirb + tsch 0(%r5) .Lnoreset: + b .Lnoload + + .align 8 +.Lrdrnewpsw: + .long 0x00080000,0x80000000+.Lrdrint +.Lrdrwaitpsw: + .long 0x020a0000,0x80000000+.Lrdrint #endif - + # # everything loaded, go for it # @@ -518,9 +533,9 @@ startup:basr %r13,0 # get base l %r2,.Lrcp2-.LPG1(%r13) # try with Read SCP b .Lservicecall-.LPG1(%r13) .Lprocsccb: - lh %r1,.Lscpincr1-PARMAREA(%r4) # use this one if != 0 - chi %r1,0x00 - jne .Lscnd + lghi %r1,0 + icm %r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0 + jnz .Lscnd lg %r1,.Lscpincr2-PARMAREA(%r4) # otherwise use this one .Lscnd: xr %r3,%r3 # same logic diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 26889366929..06afa3103ac 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -40,6 +40,7 @@ #include <asm/pgalloc.h> #include <asm/system.h> #include <asm/uaccess.h> +#include <asm/unistd.h> #ifdef CONFIG_S390_SUPPORT #include "compat_ptrace.h" @@ -130,13 +131,19 @@ static int peek_user(struct task_struct *child, addr_t addr, addr_t data) { struct user *dummy = NULL; - addr_t offset, tmp; + addr_t offset, tmp, mask; /* * Stupid gdb peeks/pokes the access registers in 64 bit with * an alignment of 4. Programmers from hell... */ - if ((addr & 3) || addr > sizeof(struct user) - __ADDR_MASK) + mask = __ADDR_MASK; +#ifdef CONFIG_ARCH_S390X + if (addr >= (addr_t) &dummy->regs.acrs && + addr < (addr_t) &dummy->regs.orig_gpr2) + mask = 3; +#endif + if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK) return -EIO; if (addr < (addr_t) &dummy->regs.acrs) { @@ -153,6 +160,16 @@ peek_user(struct task_struct *child, addr_t addr, addr_t data) * access registers are stored in the thread structure */ offset = addr - (addr_t) &dummy->regs.acrs; +#ifdef CONFIG_ARCH_S390X + /* + * Very special case: old & broken 64 bit gdb reading + * from acrs[15]. Result is a 64 bit value. Read the + * 32 bit acrs[15] value and shift it by 32. Sick... + */ + if (addr == (addr_t) &dummy->regs.acrs[15]) + tmp = ((unsigned long) child->thread.acrs[15]) << 32; + else +#endif tmp = *(addr_t *)((addr_t) &child->thread.acrs + offset); } else if (addr == (addr_t) &dummy->regs.orig_gpr2) { @@ -167,6 +184,9 @@ peek_user(struct task_struct *child, addr_t addr, addr_t data) */ offset = addr - (addr_t) &dummy->regs.fp_regs; tmp = *(addr_t *)((addr_t) &child->thread.fp_regs + offset); + if (addr == (addr_t) &dummy->regs.fp_regs.fpc) + tmp &= (unsigned long) FPC_VALID_MASK + << (BITS_PER_LONG - 32); } else if (addr < (addr_t) (&dummy->regs.per_info + 1)) { /* @@ -191,13 +211,19 @@ static int poke_user(struct task_struct *child, addr_t addr, addr_t data) { struct user *dummy = NULL; - addr_t offset; + addr_t offset, mask; /* * Stupid gdb peeks/pokes the access registers in 64 bit with * an alignment of 4. Programmers from hell indeed... */ - if ((addr & 3) || addr > sizeof(struct user) - __ADDR_MASK) + mask = __ADDR_MASK; +#ifdef CONFIG_ARCH_S390X + if (addr >= (addr_t) &dummy->regs.acrs && + addr < (addr_t) &dummy->regs.orig_gpr2) + mask = 3; +#endif + if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK) return -EIO; if (addr < (addr_t) &dummy->regs.acrs) { @@ -224,6 +250,17 @@ poke_user(struct task_struct *child, addr_t addr, addr_t data) * access registers are stored in the thread structure */ offset = addr - (addr_t) &dummy->regs.acrs; +#ifdef CONFIG_ARCH_S390X + /* + * Very special case: old & broken 64 bit gdb writing + * to acrs[15] with a 64 bit value. Ignore the lower + * half of the value and write the upper 32 bit to + * acrs[15]. Sick... + */ + if (addr == (addr_t) &dummy->regs.acrs[15]) + child->thread.acrs[15] = (unsigned int) (data >> 32); + else +#endif *(addr_t *)((addr_t) &child->thread.acrs + offset) = data; } else if (addr == (addr_t) &dummy->regs.orig_gpr2) { @@ -237,7 +274,8 @@ poke_user(struct task_struct *child, addr_t addr, addr_t data) * floating point regs. are stored in the thread structure */ if (addr == (addr_t) &dummy->regs.fp_regs.fpc && - (data & ~FPC_VALID_MASK) != 0) + (data & ~((unsigned long) FPC_VALID_MASK + << (BITS_PER_LONG - 32))) != 0) return -EINVAL; offset = addr - (addr_t) &dummy->regs.fp_regs; *(addr_t *)((addr_t) &child->thread.fp_regs + offset) = data; @@ -723,6 +761,13 @@ syscall_trace(struct pt_regs *regs, int entryexit) ? 0x80 : 0)); /* + * If the debuffer has set an invalid system call number, + * we prepare to skip the system call restart handling. + */ + if (!entryexit && regs->gprs[2] >= NR_syscalls) + regs->trap = -1; + + /* * this isn't the same as continuing with a signal, but it will do * for normal use. strace only continues with a signal if the * stopping signal is not SIGTRAP. -brl diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c index 8b90e9528b9..ca34b6f34b3 100644 --- a/arch/s390/kernel/traps.c +++ b/arch/s390/kernel/traps.c @@ -668,7 +668,10 @@ asmlinkage void space_switch_exception(struct pt_regs * regs, long int_code) asmlinkage void kernel_stack_overflow(struct pt_regs * regs) { - die("Kernel stack overflow", regs, 0); + bust_spinlocks(1); + printk("Kernel stack overflow.\n"); + show_regs(regs); + bust_spinlocks(0); panic("Corrupt kernel stack, can't continue."); } diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c index f5a5bc09b8f..2d5cb138575 100644 --- a/arch/s390/mm/cmm.c +++ b/arch/s390/mm/cmm.c @@ -21,7 +21,7 @@ #include <asm/uaccess.h> static char *sender = "VMRMSVM"; -module_param(sender, charp, 0); +module_param(sender, charp, 0400); MODULE_PARM_DESC(sender, "Guest name that may send SMSG messages (default VMRMSVM)"); diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 80306bc8c79..75fde949d12 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -207,7 +207,7 @@ do_exception(struct pt_regs *regs, unsigned long error_code, int is_protection) * we are not in an interrupt and that there is a * user context. */ - if (user_address == 0 || in_interrupt() || !mm) + if (user_address == 0 || in_atomic() || !mm) goto no_context; /* diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c index df5ac294c37..917b2f32f26 100644 --- a/arch/sh/kernel/sys_sh.c +++ b/arch/sh/kernel/sys_sh.c @@ -79,6 +79,10 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, (!vma || addr + len <= vma->vm_start)) return addr; } + if (len <= mm->cached_hole_size) { + mm->cached_hole_size = 0; + mm->free_area_cache = TASK_UNMAPPED_BASE; + } if (flags & MAP_PRIVATE) addr = PAGE_ALIGN(mm->free_area_cache); else @@ -95,6 +99,7 @@ full_search: */ if (start_addr != TASK_UNMAPPED_BASE) { start_addr = addr = TASK_UNMAPPED_BASE; + mm->cached_hole_size = 0; goto full_search; } return -ENOMEM; @@ -106,6 +111,9 @@ full_search: mm->free_area_cache = addr + len; return addr; } + if (addr + mm->cached_hole_size < vma->vm_start) + mm->cached_hole_size = vma->vm_start - addr; + addr = vma->vm_end; if (!(flags & MAP_PRIVATE)) addr = COLOUR_ALIGN(addr); diff --git a/arch/sh/lib/delay.c b/arch/sh/lib/delay.c index 50b36037d86..351714694d6 100644 --- a/arch/sh/lib/delay.c +++ b/arch/sh/lib/delay.c @@ -24,7 +24,7 @@ inline void __const_udelay(unsigned long xloops) __asm__("dmulu.l %0, %2\n\t" "sts mach, %0" : "=r" (xloops) - : "0" (xloops), "r" (cpu_data[_smp_processor_id()].loops_per_jiffy) + : "0" (xloops), "r" (cpu_data[raw_smp_processor_id()].loops_per_jiffy) : "macl", "mach"); __delay(xloops * HZ); } diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c index 1f897bab231..95bb1a6c606 100644 --- a/arch/sh/mm/hugetlbpage.c +++ b/arch/sh/mm/hugetlbpage.c @@ -24,7 +24,7 @@ #include <asm/tlbflush.h> #include <asm/cacheflush.h> -static pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) +pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) { pgd_t *pgd; pmd_t *pmd; @@ -39,7 +39,7 @@ static pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) return pte; } -static pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) +pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) { pgd_t *pgd; pmd_t *pmd; @@ -56,28 +56,34 @@ static pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) #define mk_pte_huge(entry) do { pte_val(entry) |= _PAGE_SZHUGE; } while (0) -static void set_huge_pte(struct mm_struct *mm, struct vm_area_struct *vma, - struct page *page, pte_t * page_table, int write_access) +void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t entry) { - unsigned long i; - pte_t entry; + int i; - add_mm_counter(mm, rss, HPAGE_SIZE / PAGE_SIZE); + for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) { + set_pte_at(mm, addr, ptep, entry); + ptep++; + addr += PAGE_SIZE; + pte_val(entry) += PAGE_SIZE; + } +} - if (write_access) - entry = pte_mkwrite(pte_mkdirty(mk_pte(page, - vma->vm_page_prot))); - else - entry = pte_wrprotect(mk_pte(page, vma->vm_page_prot)); - entry = pte_mkyoung(entry); - mk_pte_huge(entry); +pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, + pte_t *ptep) +{ + pte_t entry; + int i; - for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) { - set_pte(page_table, entry); - page_table++; + entry = *ptep; - pte_val(entry) += PAGE_SIZE; + for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) { + pte_clear(mm, addr, ptep); + addr += PAGE_SIZE; + ptep++; } + + return entry; } /* @@ -92,79 +98,6 @@ int is_aligned_hugepage_range(unsigned long addr, unsigned long len) return 0; } -int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src, - struct vm_area_struct *vma) -{ - pte_t *src_pte, *dst_pte, entry; - struct page *ptepage; - unsigned long addr = vma->vm_start; - unsigned long end = vma->vm_end; - int i; - - while (addr < end) { - dst_pte = huge_pte_alloc(dst, addr); - if (!dst_pte) - goto nomem; - src_pte = huge_pte_offset(src, addr); - BUG_ON(!src_pte || pte_none(*src_pte)); - entry = *src_pte; - ptepage = pte_page(entry); - get_page(ptepage); - for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) { - set_pte(dst_pte, entry); - pte_val(entry) += PAGE_SIZE; - dst_pte++; - } - add_mm_counter(dst, rss, HPAGE_SIZE / PAGE_SIZE); - addr += HPAGE_SIZE; - } - return 0; - -nomem: - return -ENOMEM; -} - -int follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma, - struct page **pages, struct vm_area_struct **vmas, - unsigned long *position, int *length, int i) -{ - unsigned long vaddr = *position; - int remainder = *length; - - WARN_ON(!is_vm_hugetlb_page(vma)); - - while (vaddr < vma->vm_end && remainder) { - if (pages) { - pte_t *pte; - struct page *page; - - pte = huge_pte_offset(mm, vaddr); - - /* hugetlb should be locked, and hence, prefaulted */ - BUG_ON(!pte || pte_none(*pte)); - - page = pte_page(*pte); - - WARN_ON(!PageCompound(page)); - - get_page(page); - pages[i] = page; - } - - if (vmas) - vmas[i] = vma; - - vaddr += PAGE_SIZE; - --remainder; - ++i; - } - - *length = remainder; - *position = vaddr; - - return i; -} - struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address, int write) { @@ -181,84 +114,3 @@ struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address, { return NULL; } - -void unmap_hugepage_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) -{ - struct mm_struct *mm = vma->vm_mm; - unsigned long address; - pte_t *pte; - struct page *page; - int i; - - BUG_ON(start & (HPAGE_SIZE - 1)); - BUG_ON(end & (HPAGE_SIZE - 1)); - - for (address = start; address < end; address += HPAGE_SIZE) { - pte = huge_pte_offset(mm, address); - BUG_ON(!pte); - if (pte_none(*pte)) - continue; - page = pte_page(*pte); - put_page(page); - for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) { - pte_clear(mm, address+(i*PAGE_SIZE), pte); - pte++; - } - } - add_mm_counter(mm, rss, -((end - start) >> PAGE_SHIFT)); - flush_tlb_range(vma, start, end); -} - -int hugetlb_prefault(struct address_space *mapping, struct vm_area_struct *vma) -{ - struct mm_struct *mm = current->mm; - unsigned long addr; - int ret = 0; - - BUG_ON(vma->vm_start & ~HPAGE_MASK); - BUG_ON(vma->vm_end & ~HPAGE_MASK); - - spin_lock(&mm->page_table_lock); - for (addr = vma->vm_start; addr < vma->vm_end; addr += HPAGE_SIZE) { - unsigned long idx; - pte_t *pte = huge_pte_alloc(mm, addr); - struct page *page; - - if (!pte) { - ret = -ENOMEM; - goto out; - } - if (!pte_none(*pte)) - continue; - - idx = ((addr - vma->vm_start) >> HPAGE_SHIFT) - + (vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT)); - page = find_get_page(mapping, idx); - if (!page) { - /* charge the fs quota first */ - if (hugetlb_get_quota(mapping)) { - ret = -ENOMEM; - goto out; - } - page = alloc_huge_page(); - if (!page) { - hugetlb_put_quota(mapping); - ret = -ENOMEM; - goto out; - } - ret = add_to_page_cache(page, mapping, idx, GFP_ATOMIC); - if (! ret) { - unlock_page(page); - } else { - hugetlb_put_quota(mapping); - free_huge_page(page); - goto out; - } - } - set_huge_pte(mm, vma, page, pte, vma->vm_flags & VM_WRITE); - } -out: - spin_unlock(&mm->page_table_lock); - return ret; -} diff --git a/arch/sh64/mm/hugetlbpage.c b/arch/sh64/mm/hugetlbpage.c index bcad2aefa4e..dcd9c8a8baf 100644 --- a/arch/sh64/mm/hugetlbpage.c +++ b/arch/sh64/mm/hugetlbpage.c @@ -24,7 +24,7 @@ #include <asm/tlbflush.h> #include <asm/cacheflush.h> -static pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) +pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) { pgd_t *pgd; pmd_t *pmd; @@ -39,7 +39,7 @@ static pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) return pte; } -static pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) +pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) { pgd_t *pgd; pmd_t *pmd; @@ -80,6 +80,20 @@ static void set_huge_pte(struct mm_struct *mm, struct vm_area_struct *vma, } } +pte_t huge_ptep_get_and_clear(pte_t *ptep) +{ + pte_t entry; + + entry = *ptep; + + for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) { + pte_clear(pte); + pte++; + } + + return entry; +} + /* * This function checks for proper alignment of input addr and len parameters. */ diff --git a/arch/sparc/mm/init.c b/arch/sparc/mm/init.c index a2dea69b2f0..ec2e05028a1 100644 --- a/arch/sparc/mm/init.c +++ b/arch/sparc/mm/init.c @@ -384,7 +384,6 @@ void map_high_region(unsigned long start_pfn, unsigned long end_pfn) struct page *page = pfn_to_page(tmp); ClearPageReserved(page); - set_bit(PG_highmem, &page->flags); set_page_count(page, 1); __free_page(page); totalhigh_pages++; diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c index 292983413ae..2803bc7c2c7 100644 --- a/arch/sparc64/kernel/pci_iommu.c +++ b/arch/sparc64/kernel/pci_iommu.c @@ -8,6 +8,7 @@ #include <linux/kernel.h> #include <linux/sched.h> #include <linux/mm.h> +#include <linux/delay.h> #include <asm/pbm.h> @@ -195,6 +196,34 @@ static iopte_t *alloc_consistent_cluster(struct pci_iommu *iommu, unsigned long return NULL; } +static int iommu_alloc_ctx(struct pci_iommu *iommu) +{ + int lowest = iommu->ctx_lowest_free; + int sz = IOMMU_NUM_CTXS - lowest; + int n = find_next_zero_bit(iommu->ctx_bitmap, sz, lowest); + + if (unlikely(n == sz)) { + n = find_next_zero_bit(iommu->ctx_bitmap, lowest, 1); + if (unlikely(n == lowest)) { + printk(KERN_WARNING "IOMMU: Ran out of contexts.\n"); + n = 0; + } + } + if (n) + __set_bit(n, iommu->ctx_bitmap); + + return n; +} + +static inline void iommu_free_ctx(struct pci_iommu *iommu, int ctx) +{ + if (likely(ctx)) { + __clear_bit(ctx, iommu->ctx_bitmap); + if (ctx < iommu->ctx_lowest_free) + iommu->ctx_lowest_free = ctx; + } +} + /* Allocate and map kernel buffer of size SIZE using consistent mode * DMA for PCI device PDEV. Return non-NULL cpu-side address if * successful and set *DMA_ADDRP to the PCI side dma address. @@ -235,7 +264,7 @@ void *pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_ad npages = size >> IO_PAGE_SHIFT; ctx = 0; if (iommu->iommu_ctxflush) - ctx = iommu->iommu_cur_ctx++; + ctx = iommu_alloc_ctx(iommu); first_page = __pa(first_page); while (npages--) { iopte_val(*iopte) = (IOPTE_CONSISTENT(ctx) | @@ -316,6 +345,8 @@ void pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu, dma_addr_ } } + iommu_free_ctx(iommu, ctx); + spin_unlock_irqrestore(&iommu->lock, flags); order = get_order(size); @@ -359,7 +390,7 @@ dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr, size_t sz, int direct base_paddr = __pa(oaddr & IO_PAGE_MASK); ctx = 0; if (iommu->iommu_ctxflush) - ctx = iommu->iommu_cur_ctx++; + ctx = iommu_alloc_ctx(iommu); if (strbuf->strbuf_enabled) iopte_protection = IOPTE_STREAMING(ctx); else @@ -379,6 +410,70 @@ bad: return PCI_DMA_ERROR_CODE; } +static void pci_strbuf_flush(struct pci_strbuf *strbuf, struct pci_iommu *iommu, u32 vaddr, unsigned long ctx, unsigned long npages, int direction) +{ + int limit; + + if (strbuf->strbuf_ctxflush && + iommu->iommu_ctxflush) { + unsigned long matchreg, flushreg; + u64 val; + + flushreg = strbuf->strbuf_ctxflush; + matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx); + + pci_iommu_write(flushreg, ctx); + val = pci_iommu_read(matchreg); + val &= 0xffff; + if (!val) + goto do_flush_sync; + + while (val) { + if (val & 0x1) + pci_iommu_write(flushreg, ctx); + val >>= 1; + } + val = pci_iommu_read(matchreg); + if (unlikely(val)) { + printk(KERN_WARNING "pci_strbuf_flush: ctx flush " + "timeout matchreg[%lx] ctx[%lx]\n", + val, ctx); + goto do_page_flush; + } + } else { + unsigned long i; + + do_page_flush: + for (i = 0; i < npages; i++, vaddr += IO_PAGE_SIZE) + pci_iommu_write(strbuf->strbuf_pflush, vaddr); + } + +do_flush_sync: + /* If the device could not have possibly put dirty data into + * the streaming cache, no flush-flag synchronization needs + * to be performed. + */ + if (direction == PCI_DMA_TODEVICE) + return; + + PCI_STC_FLUSHFLAG_INIT(strbuf); + pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa); + (void) pci_iommu_read(iommu->write_complete_reg); + + limit = 100000; + while (!PCI_STC_FLUSHFLAG_SET(strbuf)) { + limit--; + if (!limit) + break; + udelay(1); + membar("#LoadLoad"); + } + if (!limit) + printk(KERN_WARNING "pci_strbuf_flush: flushflag timeout " + "vaddr[%08x] ctx[%lx] npages[%ld]\n", + vaddr, ctx, npages); +} + /* Unmap a single streaming mode DMA translation. */ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int direction) { @@ -386,7 +481,7 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int struct pci_iommu *iommu; struct pci_strbuf *strbuf; iopte_t *base; - unsigned long flags, npages, i, ctx; + unsigned long flags, npages, ctx; if (direction == PCI_DMA_NONE) BUG(); @@ -414,29 +509,8 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int ctx = (iopte_val(*base) & IOPTE_CONTEXT) >> 47UL; /* Step 1: Kick data out of streaming buffers if necessary. */ - if (strbuf->strbuf_enabled) { - u32 vaddr = bus_addr; - - PCI_STC_FLUSHFLAG_INIT(strbuf); - if (strbuf->strbuf_ctxflush && - iommu->iommu_ctxflush) { - unsigned long matchreg, flushreg; - - flushreg = strbuf->strbuf_ctxflush; - matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx); - do { - pci_iommu_write(flushreg, ctx); - } while(((long)pci_iommu_read(matchreg)) < 0L); - } else { - for (i = 0; i < npages; i++, vaddr += IO_PAGE_SIZE) - pci_iommu_write(strbuf->strbuf_pflush, vaddr); - } - - pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa); - (void) pci_iommu_read(iommu->write_complete_reg); - while (!PCI_STC_FLUSHFLAG_SET(strbuf)) - membar("#LoadLoad"); - } + if (strbuf->strbuf_enabled) + pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction); /* Step 2: Clear out first TSB entry. */ iopte_make_dummy(iommu, base); @@ -444,6 +518,8 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int free_streaming_cluster(iommu, bus_addr - iommu->page_table_map_base, npages, ctx); + iommu_free_ctx(iommu, ctx); + spin_unlock_irqrestore(&iommu->lock, flags); } @@ -583,7 +659,7 @@ int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int /* Step 4: Choose a context if necessary. */ ctx = 0; if (iommu->iommu_ctxflush) - ctx = iommu->iommu_cur_ctx++; + ctx = iommu_alloc_ctx(iommu); /* Step 5: Create the mappings. */ if (strbuf->strbuf_enabled) @@ -647,29 +723,8 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, ctx = (iopte_val(*base) & IOPTE_CONTEXT) >> 47UL; /* Step 1: Kick data out of streaming buffers if necessary. */ - if (strbuf->strbuf_enabled) { - u32 vaddr = (u32) bus_addr; - - PCI_STC_FLUSHFLAG_INIT(strbuf); - if (strbuf->strbuf_ctxflush && - iommu->iommu_ctxflush) { - unsigned long matchreg, flushreg; - - flushreg = strbuf->strbuf_ctxflush; - matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx); - do { - pci_iommu_write(flushreg, ctx); - } while(((long)pci_iommu_read(matchreg)) < 0L); - } else { - for (i = 0; i < npages; i++, vaddr += IO_PAGE_SIZE) - pci_iommu_write(strbuf->strbuf_pflush, vaddr); - } - - pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa); - (void) pci_iommu_read(iommu->write_complete_reg); - while (!PCI_STC_FLUSHFLAG_SET(strbuf)) - membar("#LoadLoad"); - } + if (strbuf->strbuf_enabled) + pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction); /* Step 2: Clear out first TSB entry. */ iopte_make_dummy(iommu, base); @@ -677,6 +732,8 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, free_streaming_cluster(iommu, bus_addr - iommu->page_table_map_base, npages, ctx); + iommu_free_ctx(iommu, ctx); + spin_unlock_irqrestore(&iommu->lock, flags); } @@ -715,28 +772,7 @@ void pci_dma_sync_single_for_cpu(struct pci_dev *pdev, dma_addr_t bus_addr, size } /* Step 2: Kick data out of streaming buffers. */ - PCI_STC_FLUSHFLAG_INIT(strbuf); - if (iommu->iommu_ctxflush && - strbuf->strbuf_ctxflush) { - unsigned long matchreg, flushreg; - - flushreg = strbuf->strbuf_ctxflush; - matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx); - do { - pci_iommu_write(flushreg, ctx); - } while(((long)pci_iommu_read(matchreg)) < 0L); - } else { - unsigned long i; - - for (i = 0; i < npages; i++, bus_addr += IO_PAGE_SIZE) - pci_iommu_write(strbuf->strbuf_pflush, bus_addr); - } - - /* Step 3: Perform flush synchronization sequence. */ - pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa); - (void) pci_iommu_read(iommu->write_complete_reg); - while (!PCI_STC_FLUSHFLAG_SET(strbuf)) - membar("#LoadLoad"); + pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction); spin_unlock_irqrestore(&iommu->lock, flags); } @@ -749,7 +785,8 @@ void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev, struct scatterlist *sglist, i struct pcidev_cookie *pcp; struct pci_iommu *iommu; struct pci_strbuf *strbuf; - unsigned long flags, ctx; + unsigned long flags, ctx, npages, i; + u32 bus_addr; pcp = pdev->sysdata; iommu = pcp->pbm->iommu; @@ -772,36 +809,14 @@ void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev, struct scatterlist *sglist, i } /* Step 2: Kick data out of streaming buffers. */ - PCI_STC_FLUSHFLAG_INIT(strbuf); - if (iommu->iommu_ctxflush && - strbuf->strbuf_ctxflush) { - unsigned long matchreg, flushreg; - - flushreg = strbuf->strbuf_ctxflush; - matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx); - do { - pci_iommu_write(flushreg, ctx); - } while (((long)pci_iommu_read(matchreg)) < 0L); - } else { - unsigned long i, npages; - u32 bus_addr; - - bus_addr = sglist[0].dma_address & IO_PAGE_MASK; - - for(i = 1; i < nelems; i++) - if (!sglist[i].dma_length) - break; - i--; - npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length) - bus_addr) >> IO_PAGE_SHIFT; - for (i = 0; i < npages; i++, bus_addr += IO_PAGE_SIZE) - pci_iommu_write(strbuf->strbuf_pflush, bus_addr); - } - - /* Step 3: Perform flush synchronization sequence. */ - pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa); - (void) pci_iommu_read(iommu->write_complete_reg); - while (!PCI_STC_FLUSHFLAG_SET(strbuf)) - membar("#LoadLoad"); + bus_addr = sglist[0].dma_address & IO_PAGE_MASK; + for(i = 1; i < nelems; i++) + if (!sglist[i].dma_length) + break; + i--; + npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length) + - bus_addr) >> IO_PAGE_SHIFT; + pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction); spin_unlock_irqrestore(&iommu->lock, flags); } diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c index 3567fa879e1..534320ef0db 100644 --- a/arch/sparc64/kernel/pci_psycho.c +++ b/arch/sparc64/kernel/pci_psycho.c @@ -1212,7 +1212,7 @@ static void __init psycho_iommu_init(struct pci_controller_info *p) /* Setup initial software IOMMU state. */ spin_lock_init(&iommu->lock); - iommu->iommu_cur_ctx = 0; + iommu->ctx_lowest_free = 1; /* Register addresses. */ iommu->iommu_control = p->pbm_A.controller_regs + PSYCHO_IOMMU_CONTROL; diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c index 5525d1ec4af..53d333b4a4e 100644 --- a/arch/sparc64/kernel/pci_sabre.c +++ b/arch/sparc64/kernel/pci_sabre.c @@ -1265,7 +1265,7 @@ static void __init sabre_iommu_init(struct pci_controller_info *p, /* Setup initial software IOMMU state. */ spin_lock_init(&iommu->lock); - iommu->iommu_cur_ctx = 0; + iommu->ctx_lowest_free = 1; /* Register addresses. */ iommu->iommu_control = p->pbm_A.controller_regs + SABRE_IOMMU_CONTROL; diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c index e93fcadc372..5753175b94e 100644 --- a/arch/sparc64/kernel/pci_schizo.c +++ b/arch/sparc64/kernel/pci_schizo.c @@ -1753,7 +1753,7 @@ static void schizo_pbm_iommu_init(struct pci_pbm_info *pbm) /* Setup initial software IOMMU state. */ spin_lock_init(&iommu->lock); - iommu->iommu_cur_ctx = 0; + iommu->ctx_lowest_free = 1; /* Register addresses, SCHIZO has iommu ctx flushing. */ iommu->iommu_control = pbm->pbm_regs + SCHIZO_IOMMU_CONTROL; diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c index 14d9c3a21b9..89f5e019f24 100644 --- a/arch/sparc64/kernel/sbus.c +++ b/arch/sparc64/kernel/sbus.c @@ -117,19 +117,42 @@ static void iommu_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages #define STRBUF_TAG_VALID 0x02UL -static void strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages) +static void sbus_strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages, int direction) { - iommu->strbuf_flushflag = 0UL; - while (npages--) - upa_writeq(base + (npages << IO_PAGE_SHIFT), + unsigned long n; + int limit; + + n = npages; + while (n--) + upa_writeq(base + (n << IO_PAGE_SHIFT), iommu->strbuf_regs + STRBUF_PFLUSH); + /* If the device could not have possibly put dirty data into + * the streaming cache, no flush-flag synchronization needs + * to be performed. + */ + if (direction == SBUS_DMA_TODEVICE) + return; + + iommu->strbuf_flushflag = 0UL; + /* Whoopee cushion! */ upa_writeq(__pa(&iommu->strbuf_flushflag), iommu->strbuf_regs + STRBUF_FSYNC); upa_readq(iommu->sbus_control_reg); - while (iommu->strbuf_flushflag == 0UL) + + limit = 100000; + while (iommu->strbuf_flushflag == 0UL) { + limit--; + if (!limit) + break; + udelay(1); membar("#LoadLoad"); + } + if (!limit) + printk(KERN_WARNING "sbus_strbuf_flush: flushflag timeout " + "vaddr[%08x] npages[%ld]\n", + base, npages); } static iopte_t *alloc_streaming_cluster(struct sbus_iommu *iommu, unsigned long npages) @@ -406,7 +429,7 @@ void sbus_unmap_single(struct sbus_dev *sdev, dma_addr_t dma_addr, size_t size, spin_lock_irqsave(&iommu->lock, flags); free_streaming_cluster(iommu, dma_base, size >> IO_PAGE_SHIFT); - strbuf_flush(iommu, dma_base, size >> IO_PAGE_SHIFT); + sbus_strbuf_flush(iommu, dma_base, size >> IO_PAGE_SHIFT, direction); spin_unlock_irqrestore(&iommu->lock, flags); } @@ -569,7 +592,7 @@ void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg, int nents, int iommu = sdev->bus->iommu; spin_lock_irqsave(&iommu->lock, flags); free_streaming_cluster(iommu, dvma_base, size >> IO_PAGE_SHIFT); - strbuf_flush(iommu, dvma_base, size >> IO_PAGE_SHIFT); + sbus_strbuf_flush(iommu, dvma_base, size >> IO_PAGE_SHIFT, direction); spin_unlock_irqrestore(&iommu->lock, flags); } @@ -581,7 +604,7 @@ void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, dma_addr_t base, size_t size = (IO_PAGE_ALIGN(base + size) - (base & IO_PAGE_MASK)); spin_lock_irqsave(&iommu->lock, flags); - strbuf_flush(iommu, base & IO_PAGE_MASK, size >> IO_PAGE_SHIFT); + sbus_strbuf_flush(iommu, base & IO_PAGE_MASK, size >> IO_PAGE_SHIFT, direction); spin_unlock_irqrestore(&iommu->lock, flags); } @@ -605,7 +628,7 @@ void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, struct scatterlist *sg, int size = IO_PAGE_ALIGN(sg[i].dma_address + sg[i].dma_length) - base; spin_lock_irqsave(&iommu->lock, flags); - strbuf_flush(iommu, base, size >> IO_PAGE_SHIFT); + sbus_strbuf_flush(iommu, base, size >> IO_PAGE_SHIFT, direction); spin_unlock_irqrestore(&iommu->lock, flags); } diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 12c3d84b746..b7e6a91952b 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -383,6 +383,17 @@ static void __init process_switch(char c) /* Use PROM debug console. */ register_console(&prom_debug_console); break; + case 'P': + /* Force UltraSPARC-III P-Cache on. */ + if (tlb_type != cheetah) { + printk("BOOT: Ignoring P-Cache force option.\n"); + break; + } + cheetah_pcache_forced_on = 1; + add_taint(TAINT_MACHINE_CHECK); + cheetah_enable_pcache(); + break; + default: printk("Unknown boot switch (-%c)\n", c); break; diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 6dff06a44e7..e5b9c7a2778 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -123,6 +123,9 @@ void __init smp_callin(void) smp_setup_percpu_timer(); + if (cheetah_pcache_forced_on) + cheetah_enable_pcache(); + local_irq_enable(); calibrate_delay(); diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c index 0077f02f4b3..5f8c822a2b4 100644 --- a/arch/sparc64/kernel/sys_sparc.c +++ b/arch/sparc64/kernel/sys_sparc.c @@ -84,6 +84,10 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi return addr; } + if (len <= mm->cached_hole_size) { + mm->cached_hole_size = 0; + mm->free_area_cache = TASK_UNMAPPED_BASE; + } start_addr = addr = mm->free_area_cache; task_size -= len; @@ -103,6 +107,7 @@ full_search: if (task_size < addr) { if (start_addr != TASK_UNMAPPED_BASE) { start_addr = addr = TASK_UNMAPPED_BASE; + mm->cached_hole_size = 0; goto full_search; } return -ENOMEM; @@ -114,6 +119,9 @@ full_search: mm->free_area_cache = addr + len; return addr; } + if (addr + mm->cached_hole_size < vma->vm_start) + mm->cached_hole_size = vma->vm_start - addr; + addr = vma->vm_end; if (do_color_align) addr = COLOUR_ALIGN(addr, pgoff); diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 56b203a2af6..a9f4596d7c2 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -421,6 +421,25 @@ asmlinkage void cee_log(unsigned long ce_status, } } +int cheetah_pcache_forced_on; + +void cheetah_enable_pcache(void) +{ + unsigned long dcr; + + printk("CHEETAH: Enabling P-Cache on cpu %d.\n", + smp_processor_id()); + + __asm__ __volatile__("ldxa [%%g0] %1, %0" + : "=r" (dcr) + : "i" (ASI_DCU_CONTROL_REG)); + dcr |= (DCU_PE | DCU_HPE | DCU_SPE | DCU_SL); + __asm__ __volatile__("stxa %0, [%%g0] %1\n\t" + "membar #Sync" + : /* no outputs */ + : "r" (dcr), "i" (ASI_DCU_CONTROL_REG)); +} + /* Cheetah error trap handling. */ static unsigned long ecache_flush_physbase; static unsigned long ecache_flush_linesize; diff --git a/arch/sparc64/lib/delay.c b/arch/sparc64/lib/delay.c index f6b4c784d53..e8808727617 100644 --- a/arch/sparc64/lib/delay.c +++ b/arch/sparc64/lib/delay.c @@ -31,7 +31,7 @@ void __const_udelay(unsigned long n) { n *= 4; - n *= (cpu_data(_smp_processor_id()).udelay_val * (HZ/4)); + n *= (cpu_data(raw_smp_processor_id()).udelay_val * (HZ/4)); n >>= 32; __delay(n + 1); diff --git a/arch/sparc64/mm/hugetlbpage.c b/arch/sparc64/mm/hugetlbpage.c index 5a1f831b2de..625cbb336a2 100644 --- a/arch/sparc64/mm/hugetlbpage.c +++ b/arch/sparc64/mm/hugetlbpage.c @@ -22,7 +22,7 @@ #include <asm/cacheflush.h> #include <asm/mmu_context.h> -static pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) +pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) { pgd_t *pgd; pud_t *pud; @@ -41,7 +41,7 @@ static pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) return pte; } -static pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) +pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) { pgd_t *pgd; pud_t *pud; @@ -62,30 +62,34 @@ static pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) #define mk_pte_huge(entry) do { pte_val(entry) |= _PAGE_SZHUGE; } while (0) -static void set_huge_pte(struct mm_struct *mm, struct vm_area_struct *vma, - unsigned long addr, - struct page *page, pte_t * page_table, int write_access) +void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t entry) { - unsigned long i; - pte_t entry; + int i; + + for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) { + set_pte_at(mm, addr, ptep, entry); + ptep++; + addr += PAGE_SIZE; + pte_val(entry) += PAGE_SIZE; + } +} - add_mm_counter(mm, rss, HPAGE_SIZE / PAGE_SIZE); +pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, + pte_t *ptep) +{ + pte_t entry; + int i; - if (write_access) - entry = pte_mkwrite(pte_mkdirty(mk_pte(page, - vma->vm_page_prot))); - else - entry = pte_wrprotect(mk_pte(page, vma->vm_page_prot)); - entry = pte_mkyoung(entry); - mk_pte_huge(entry); + entry = *ptep; for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) { - set_pte_at(mm, addr, page_table, entry); - page_table++; + pte_clear(mm, addr, ptep); addr += PAGE_SIZE; - - pte_val(entry) += PAGE_SIZE; + ptep++; } + + return entry; } /* @@ -100,79 +104,6 @@ int is_aligned_hugepage_range(unsigned long addr, unsigned long len) return 0; } -int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src, - struct vm_area_struct *vma) -{ - pte_t *src_pte, *dst_pte, entry; - struct page *ptepage; - unsigned long addr = vma->vm_start; - unsigned long end = vma->vm_end; - int i; - - while (addr < end) { - dst_pte = huge_pte_alloc(dst, addr); - if (!dst_pte) - goto nomem; - src_pte = huge_pte_offset(src, addr); - BUG_ON(!src_pte || pte_none(*src_pte)); - entry = *src_pte; - ptepage = pte_page(entry); - get_page(ptepage); - for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) { - set_pte_at(dst, addr, dst_pte, entry); - pte_val(entry) += PAGE_SIZE; - dst_pte++; - addr += PAGE_SIZE; - } - add_mm_counter(dst, rss, HPAGE_SIZE / PAGE_SIZE); - } - return 0; - -nomem: - return -ENOMEM; -} - -int follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma, - struct page **pages, struct vm_area_struct **vmas, - unsigned long *position, int *length, int i) -{ - unsigned long vaddr = *position; - int remainder = *length; - - WARN_ON(!is_vm_hugetlb_page(vma)); - - while (vaddr < vma->vm_end && remainder) { - if (pages) { - pte_t *pte; - struct page *page; - - pte = huge_pte_offset(mm, vaddr); - - /* hugetlb should be locked, and hence, prefaulted */ - BUG_ON(!pte || pte_none(*pte)); - - page = pte_page(*pte); - - WARN_ON(!PageCompound(page)); - - get_page(page); - pages[i] = page; - } - - if (vmas) - vmas[i] = vma; - - vaddr += PAGE_SIZE; - --remainder; - ++i; - } - - *length = remainder; - *position = vaddr; - - return i; -} - struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address, int write) { @@ -190,34 +121,6 @@ struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address, return NULL; } -void unmap_hugepage_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) -{ - struct mm_struct *mm = vma->vm_mm; - unsigned long address; - pte_t *pte; - struct page *page; - int i; - - BUG_ON(start & (HPAGE_SIZE - 1)); - BUG_ON(end & (HPAGE_SIZE - 1)); - - for (address = start; address < end; address += HPAGE_SIZE) { - pte = huge_pte_offset(mm, address); - BUG_ON(!pte); - if (pte_none(*pte)) - continue; - page = pte_page(*pte); - put_page(page); - for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) { - pte_clear(mm, address+(i*PAGE_SIZE), pte); - pte++; - } - } - add_mm_counter(mm, rss, -((end - start) >> PAGE_SHIFT)); - flush_tlb_range(vma, start, end); -} - static void context_reload(void *__data) { struct mm_struct *mm = __data; @@ -226,12 +129,8 @@ static void context_reload(void *__data) load_secondary_context(mm); } -int hugetlb_prefault(struct address_space *mapping, struct vm_area_struct *vma) +void hugetlb_prefault_arch_hook(struct mm_struct *mm) { - struct mm_struct *mm = current->mm; - unsigned long addr; - int ret = 0; - /* On UltraSPARC-III+ and later, configure the second half of * the Data-TLB for huge pages. */ @@ -261,50 +160,4 @@ int hugetlb_prefault(struct address_space *mapping, struct vm_area_struct *vma) } spin_unlock(&ctx_alloc_lock); } - - BUG_ON(vma->vm_start & ~HPAGE_MASK); - BUG_ON(vma->vm_end & ~HPAGE_MASK); - - spin_lock(&mm->page_table_lock); - for (addr = vma->vm_start; addr < vma->vm_end; addr += HPAGE_SIZE) { - unsigned long idx; - pte_t *pte = huge_pte_alloc(mm, addr); - struct page *page; - - if (!pte) { - ret = -ENOMEM; - goto out; - } - if (!pte_none(*pte)) - continue; - - idx = ((addr - vma->vm_start) >> HPAGE_SHIFT) - + (vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT)); - page = find_get_page(mapping, idx); - if (!page) { - /* charge the fs quota first */ - if (hugetlb_get_quota(mapping)) { - ret = -ENOMEM; - goto out; - } - page = alloc_huge_page(); - if (!page) { - hugetlb_put_quota(mapping); - ret = -ENOMEM; - goto out; - } - ret = add_to_page_cache(page, mapping, idx, GFP_ATOMIC); - if (! ret) { - unlock_page(page); - } else { - hugetlb_put_quota(mapping); - free_huge_page(page); - goto out; - } - } - set_huge_pte(mm, vma, addr, page, pte, vma->vm_flags & VM_WRITE); - } -out: - spin_unlock(&mm->page_table_lock); - return ret; } diff --git a/arch/sparc64/solaris/socket.c b/arch/sparc64/solaris/socket.c index ec8e074c4ea..06740582717 100644 --- a/arch/sparc64/solaris/socket.c +++ b/arch/sparc64/solaris/socket.c @@ -317,8 +317,10 @@ asmlinkage int solaris_sendmsg(int fd, struct sol_nmsghdr __user *user_msg, unsi unsigned long *kcmsg; compat_size_t cmlen; - if(kern_msg.msg_controllen > sizeof(ctl) && - kern_msg.msg_controllen <= 256) { + if (kern_msg.msg_controllen <= sizeof(compat_size_t)) + return -EINVAL; + + if(kern_msg.msg_controllen > sizeof(ctl)) { err = -ENOBUFS; ctl_buf = kmalloc(kern_msg.msg_controllen, GFP_KERNEL); if(!ctl_buf) diff --git a/arch/um/Kconfig b/arch/um/Kconfig index c5292181a66..b8e952c88fd 100644 --- a/arch/um/Kconfig +++ b/arch/um/Kconfig @@ -35,6 +35,11 @@ config GENERIC_CALIBRATE_DELAY bool default y +# Used in kernel/irq/manage.c and include/linux/irq.h +config IRQ_RELEASE_METHOD + bool + default y + menu "UML-specific options" config MODE_TT diff --git a/arch/um/Kconfig.debug b/arch/um/Kconfig.debug index b89989de364..bd41e4286d0 100644 --- a/arch/um/Kconfig.debug +++ b/arch/um/Kconfig.debug @@ -2,10 +2,6 @@ menu "Kernel hacking" source "lib/Kconfig.debug" -config FRAME_POINTER - bool - default y if DEBUG_INFO - config PT_PROXY bool "Enable ptrace proxy" depends on XTERM_CHAN && DEBUG_INFO && MODE_TT diff --git a/arch/um/Kconfig_char b/arch/um/Kconfig_char index 3e50fdb6762..62d87b71179 100644 --- a/arch/um/Kconfig_char +++ b/arch/um/Kconfig_char @@ -204,5 +204,11 @@ config UML_RANDOM http://sourceforge.net/projects/gkernel/). rngd periodically reads /dev/hwrng and injects the entropy into /dev/random. +config MMAPPER + tristate "iomem emulation driver" + help + This driver allows a host file to be used as emulated IO memory inside + UML. + endmenu diff --git a/arch/um/Kconfig_x86_64 b/arch/um/Kconfig_x86_64 index fd8d7e8982b..f162f50f0b1 100644 --- a/arch/um/Kconfig_x86_64 +++ b/arch/um/Kconfig_x86_64 @@ -6,6 +6,10 @@ config 64BIT bool default y +config TOP_ADDR + hex + default 0x80000000 + config 3_LEVEL_PGTABLES bool default y diff --git a/arch/um/Makefile b/arch/um/Makefile index f2a0c40a920..3f073902351 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -122,7 +122,7 @@ endif CPPFLAGS_vmlinux.lds = $(shell echo -U$(SUBARCH) \ -DSTART=$(START) -DELF_ARCH=$(ELF_ARCH) \ -DELF_FORMAT=\"$(ELF_FORMAT)\" $(CPP_MODE-y) \ - -DKERNEL_STACK_SIZE=$(STACK_SIZE)) + -DKERNEL_STACK_SIZE=$(STACK_SIZE) -DSUBARCH=$(SUBARCH)) #The wrappers will select whether using "malloc" or the kernel allocator. LINK_WRAPS = -Wl,--wrap,malloc -Wl,--wrap,free -Wl,--wrap,calloc diff --git a/arch/um/drivers/Makefile b/arch/um/drivers/Makefile index 323f72c64cd..b2de9916c32 100644 --- a/arch/um/drivers/Makefile +++ b/arch/um/drivers/Makefile @@ -22,8 +22,8 @@ obj-y := stdio_console.o fd.o chan_kern.o chan_user.o line.o obj-$(CONFIG_SSL) += ssl.o obj-$(CONFIG_STDERR_CONSOLE) += stderr_console.o -obj-$(CONFIG_UML_NET_SLIP) += slip.o -obj-$(CONFIG_UML_NET_SLIRP) += slirp.o +obj-$(CONFIG_UML_NET_SLIP) += slip.o slip_common.o +obj-$(CONFIG_UML_NET_SLIRP) += slirp.o slip_common.o obj-$(CONFIG_UML_NET_DAEMON) += daemon.o obj-$(CONFIG_UML_NET_MCAST) += mcast.o #obj-$(CONFIG_UML_NET_PCAP) += pcap.o $(PCAP) @@ -41,6 +41,6 @@ obj-$(CONFIG_UML_WATCHDOG) += harddog.o obj-$(CONFIG_BLK_DEV_COW_COMMON) += cow_user.o obj-$(CONFIG_UML_RANDOM) += random.o -USER_OBJS := fd.o null.o pty.o tty.o xterm.o +USER_OBJS := fd.o null.o pty.o tty.o xterm.o slip_common.o include arch/um/scripts/Makefile.rules diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c index 0150038af79..14a12d6b3df 100644 --- a/arch/um/drivers/chan_kern.c +++ b/arch/um/drivers/chan_kern.c @@ -20,9 +20,17 @@ #include "os.h" #ifdef CONFIG_NOCONFIG_CHAN + +/* The printk's here are wrong because we are complaining that there is no + * output device, but printk is printing to that output device. The user will + * never see the error. printf would be better, except it can't run on a + * kernel stack because it will overflow it. + * Use printk for now since that will avoid crashing. + */ + static void *not_configged_init(char *str, int device, struct chan_opts *opts) { - printf(KERN_ERR "Using a channel type which is configured out of " + printk(KERN_ERR "Using a channel type which is configured out of " "UML\n"); return(NULL); } @@ -30,27 +38,27 @@ static void *not_configged_init(char *str, int device, struct chan_opts *opts) static int not_configged_open(int input, int output, int primary, void *data, char **dev_out) { - printf(KERN_ERR "Using a channel type which is configured out of " + printk(KERN_ERR "Using a channel type which is configured out of " "UML\n"); return(-ENODEV); } static void not_configged_close(int fd, void *data) { - printf(KERN_ERR "Using a channel type which is configured out of " + printk(KERN_ERR "Using a channel type which is configured out of " "UML\n"); } static int not_configged_read(int fd, char *c_out, void *data) { - printf(KERN_ERR "Using a channel type which is configured out of " + printk(KERN_ERR "Using a channel type which is configured out of " "UML\n"); return(-EIO); } static int not_configged_write(int fd, const char *buf, int len, void *data) { - printf(KERN_ERR "Using a channel type which is configured out of " + printk(KERN_ERR "Using a channel type which is configured out of " "UML\n"); return(-EIO); } @@ -58,7 +66,7 @@ static int not_configged_write(int fd, const char *buf, int len, void *data) static int not_configged_console_write(int fd, const char *buf, int len, void *data) { - printf(KERN_ERR "Using a channel type which is configured out of " + printk(KERN_ERR "Using a channel type which is configured out of " "UML\n"); return(-EIO); } @@ -66,7 +74,7 @@ static int not_configged_console_write(int fd, const char *buf, int len, static int not_configged_window_size(int fd, void *data, unsigned short *rows, unsigned short *cols) { - printf(KERN_ERR "Using a channel type which is configured out of " + printk(KERN_ERR "Using a channel type which is configured out of " "UML\n"); return(-ENODEV); } diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c index 583b8e137c3..5d3768156c9 100644 --- a/arch/um/drivers/chan_user.c +++ b/arch/um/drivers/chan_user.c @@ -143,22 +143,22 @@ static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out) { struct winch_data data; unsigned long stack; - int fds[2], pid, n, err; + int fds[2], n, err; char c; err = os_pipe(fds, 1, 1); if(err < 0){ printk("winch_tramp : os_pipe failed, err = %d\n", -err); - return(err); + goto out; } data = ((struct winch_data) { .pty_fd = fd, .pipe_fd = fds[1], .close_me = fds[0] } ); - pid = run_helper_thread(winch_thread, &data, 0, &stack, 0); - if(pid < 0){ + err = run_helper_thread(winch_thread, &data, 0, &stack, 0); + if(err < 0){ printk("fork of winch_thread failed - errno = %d\n", errno); - return(pid); + goto out_close; } os_close_file(fds[1]); @@ -168,14 +168,22 @@ static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out) printk("winch_tramp : failed to read synchronization byte\n"); printk("read failed, err = %d\n", -n); printk("fd %d will not support SIGWINCH\n", fd); - *fd_out = -1; + err = -EINVAL; + goto out_close1; } - return(pid); + return err ; + + out_close: + os_close_file(fds[1]); + out_close1: + os_close_file(fds[0]); + out: + return err; } void register_winch(int fd, struct tty_struct *tty) { - int pid, thread, thread_fd; + int pid, thread, thread_fd = -1; int count; char c = 1; @@ -186,7 +194,7 @@ void register_winch(int fd, struct tty_struct *tty) if(!CHOOSE_MODE_PROC(is_tracer_winch, is_skas_winch, pid, fd, tty) && (pid == -1)){ thread = winch_tramp(fd, tty, &thread_fd); - if(fd != -1){ + if(thread > 0){ register_winch_irq(thread_fd, fd, thread, tty); count = os_write_file(thread_fd, &c, sizeof(c)); diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index 025d3be8aca..0f59736db32 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -406,14 +406,12 @@ void line_disable(struct tty_struct *tty, int current_irq) if(line->driver->read_irq == current_irq) free_irq_later(line->driver->read_irq, tty); else { - free_irq_by_irq_and_dev(line->driver->read_irq, tty); free_irq(line->driver->read_irq, tty); } if(line->driver->write_irq == current_irq) free_irq_later(line->driver->write_irq, tty); else { - free_irq_by_irq_and_dev(line->driver->write_irq, tty); free_irq(line->driver->write_irq, tty); } @@ -758,7 +756,6 @@ static void unregister_winch(struct tty_struct *tty) if(winch->pid != -1) os_kill_process(winch->pid, 1); - free_irq_by_irq_and_dev(WINCH_IRQ, winch); free_irq(WINCH_IRQ, winch); list_del(&winch->list); kfree(winch); diff --git a/arch/um/drivers/mcast_kern.c b/arch/um/drivers/mcast_kern.c index faf714e87b5..217438cdef3 100644 --- a/arch/um/drivers/mcast_kern.c +++ b/arch/um/drivers/mcast_kern.c @@ -73,7 +73,6 @@ int mcast_setup(char *str, char **mac_out, void *data) struct mcast_init *init = data; char *port_str = NULL, *ttl_str = NULL, *remain; char *last; - int n; *init = ((struct mcast_init) { .addr = "239.192.168.1", @@ -89,13 +88,12 @@ int mcast_setup(char *str, char **mac_out, void *data) } if(port_str != NULL){ - n = simple_strtoul(port_str, &last, 10); + init->port = simple_strtoul(port_str, &last, 10); if((*last != '\0') || (last == port_str)){ printk(KERN_ERR "mcast_setup - Bad port : '%s'\n", port_str); return(0); } - init->port = htons(n); } if(ttl_str != NULL){ diff --git a/arch/um/drivers/mcast_user.c b/arch/um/drivers/mcast_user.c index 0fe1d9fa913..7a0d115b29d 100644 --- a/arch/um/drivers/mcast_user.c +++ b/arch/um/drivers/mcast_user.c @@ -38,7 +38,7 @@ static struct sockaddr_in *new_addr(char *addr, unsigned short port) } sin->sin_family = AF_INET; sin->sin_addr.s_addr = in_aton(addr); - sin->sin_port = port; + sin->sin_port = htons(port); return(sin); } @@ -55,28 +55,25 @@ static int mcast_open(void *data) struct mcast_data *pri = data; struct sockaddr_in *sin = pri->mcast_addr; struct ip_mreq mreq; - int fd, yes = 1; + int fd = -EINVAL, yes = 1, err = -EINVAL;; - if ((sin->sin_addr.s_addr == 0) || (sin->sin_port == 0)) { - fd = -EINVAL; + if ((sin->sin_addr.s_addr == 0) || (sin->sin_port == 0)) goto out; - } fd = socket(AF_INET, SOCK_DGRAM, 0); + if (fd < 0){ printk("mcast_open : data socket failed, errno = %d\n", errno); - fd = -ENOMEM; + fd = -errno; goto out; } if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &yes, sizeof(yes)) < 0) { printk("mcast_open: SO_REUSEADDR failed, errno = %d\n", errno); - os_close_file(fd); - fd = -EINVAL; - goto out; + goto out_close; } /* set ttl according to config */ @@ -84,26 +81,20 @@ static int mcast_open(void *data) sizeof(pri->ttl)) < 0) { printk("mcast_open: IP_MULTICAST_TTL failed, error = %d\n", errno); - os_close_file(fd); - fd = -EINVAL; - goto out; + goto out_close; } /* set LOOP, so data does get fed back to local sockets */ if (setsockopt(fd, SOL_IP, IP_MULTICAST_LOOP, &yes, sizeof(yes)) < 0) { printk("mcast_open: IP_MULTICAST_LOOP failed, error = %d\n", errno); - os_close_file(fd); - fd = -EINVAL; - goto out; + goto out_close; } /* bind socket to mcast address */ if (bind(fd, (struct sockaddr *) sin, sizeof(*sin)) < 0) { printk("mcast_open : data bind failed, errno = %d\n", errno); - os_close_file(fd); - fd = -EINVAL; - goto out; + goto out_close; } /* subscribe to the multicast group */ @@ -117,12 +108,15 @@ static int mcast_open(void *data) "interface on the host.\n"); printk("eth0 should be configured in order to use the " "multicast transport.\n"); - os_close_file(fd); - fd = -EINVAL; + goto out_close; } out: - return(fd); + return fd; + + out_close: + os_close_file(fd); + return err; } static void mcast_close(int fd, void *data) @@ -164,14 +158,3 @@ struct net_user_info mcast_user_info = { .delete_address = NULL, .max_packet = MAX_PACKET - ETH_HEADER_OTHER }; - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/drivers/mmapper_kern.c b/arch/um/drivers/mmapper_kern.c index a63231dffe0..a37a5ac13c2 100644 --- a/arch/um/drivers/mmapper_kern.c +++ b/arch/um/drivers/mmapper_kern.c @@ -18,6 +18,7 @@ #include <linux/slab.h> #include <linux/init.h> #include <linux/smp_lock.h> +#include <linux/miscdevice.h> #include <asm/uaccess.h> #include <asm/irq.h> #include <asm/pgtable.h> @@ -117,24 +118,39 @@ static struct file_operations mmapper_fops = { .release = mmapper_release, }; +static struct miscdevice mmapper_dev = { + .minor = MISC_DYNAMIC_MINOR, + .name = "mmapper", + .fops = &mmapper_fops +}; + static int __init mmapper_init(void) { + int err; + printk(KERN_INFO "Mapper v0.1\n"); v_buf = (char *) find_iomem("mmapper", &mmapper_size); if(mmapper_size == 0){ printk(KERN_ERR "mmapper_init - find_iomem failed\n"); - return(0); + goto out; } - p_buf = __pa(v_buf); + err = misc_register(&mmapper_dev); + if(err){ + printk(KERN_ERR "mmapper - misc_register failed, err = %d\n", + err); + goto out; + } - devfs_mk_cdev(MKDEV(30, 0), S_IFCHR|S_IRUGO|S_IWUGO, "mmapper"); - return(0); + p_buf = __pa(v_buf); +out: + return 0; } static void mmapper_exit(void) { + misc_deregister(&mmapper_dev); } module_init(mmapper_init); diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index 4eeaf88c1e9..5388a742869 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -146,7 +146,6 @@ static int uml_net_close(struct net_device *dev) netif_stop_queue(dev); spin_lock(&lp->lock); - free_irq_by_irq_and_dev(dev->irq, dev); free_irq(dev->irq, dev); if(lp->close != NULL) (*lp->close)(lp->fd, &lp->user); diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c index 47229fe4a81..3730d4f1271 100644 --- a/arch/um/drivers/net_user.c +++ b/arch/um/drivers/net_user.c @@ -32,7 +32,7 @@ int tap_open_common(void *dev, char *gate_addr) return(0); } -void tap_check_ips(char *gate_addr, char *eth_addr) +void tap_check_ips(char *gate_addr, unsigned char *eth_addr) { int tap_addr[4]; diff --git a/arch/um/drivers/port_kern.c b/arch/um/drivers/port_kern.c index b5ee07472f7..c41efd207fc 100644 --- a/arch/um/drivers/port_kern.c +++ b/arch/um/drivers/port_kern.c @@ -257,7 +257,6 @@ int port_wait(void *data) * connection. Then we loop here throwing out failed * connections until a good one is found. */ - free_irq_by_irq_and_dev(TELNETD_IRQ, conn); free_irq(TELNETD_IRQ, conn); if(conn->fd >= 0) break; diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c index d43e9fab05a..f9e22198e01 100644 --- a/arch/um/drivers/random.c +++ b/arch/um/drivers/random.c @@ -1,5 +1,10 @@ -/* Much of this ripped from hw_random.c */ - +/* Copyright (C) 2005 Jeff Dike <jdike@addtoit.com> */ +/* Much of this ripped from drivers/char/hw_random.c, see there for other + * copyright. + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by reference. + */ #include <linux/module.h> #include <linux/fs.h> #include <linux/miscdevice.h> @@ -12,8 +17,6 @@ */ #define RNG_VERSION "1.0.0" #define RNG_MODULE_NAME "random" -#define RNG_DRIVER_NAME RNG_MODULE_NAME " virtual driver " RNG_VERSION -#define PFX RNG_MODULE_NAME ": " #define RNG_MISCDEV_MINOR 183 /* official */ @@ -98,7 +101,7 @@ static int __init rng_init (void) err = misc_register (&rng_miscdev); if (err) { - printk (KERN_ERR PFX "misc device register failed\n"); + printk (KERN_ERR RNG_MODULE_NAME ": misc device register failed\n"); goto err_out_cleanup_hw; } @@ -120,3 +123,6 @@ static void __exit rng_cleanup (void) module_init (rng_init); module_exit (rng_cleanup); + +MODULE_DESCRIPTION("UML Host Random Number Generator (RNG) driver"); +MODULE_LICENSE("GPL"); diff --git a/arch/um/drivers/slip.h b/arch/um/drivers/slip.h index 495f2f1b142..bb0dab41c2e 100644 --- a/arch/um/drivers/slip.h +++ b/arch/um/drivers/slip.h @@ -1,10 +1,7 @@ #ifndef __UM_SLIP_H #define __UM_SLIP_H -#define BUF_SIZE 1500 - /* two bytes each for a (pathological) max packet of escaped chars + * - * terminating END char + initial END char */ -#define ENC_BUF_SIZE (2 * BUF_SIZE + 2) +#include "slip_common.h" struct slip_data { void *dev; @@ -12,28 +9,12 @@ struct slip_data { char *addr; char *gate_addr; int slave; - char ibuf[ENC_BUF_SIZE]; - char obuf[ENC_BUF_SIZE]; - int more; /* more data: do not read fd until ibuf has been drained */ - int pos; - int esc; + struct slip_proto slip; }; extern struct net_user_info slip_user_info; -extern int set_umn_addr(int fd, char *addr, char *ptp_addr); extern int slip_user_read(int fd, void *buf, int len, struct slip_data *pri); extern int slip_user_write(int fd, void *buf, int len, struct slip_data *pri); #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/drivers/slip_common.c b/arch/um/drivers/slip_common.c new file mode 100644 index 00000000000..e89cfc68fc3 --- /dev/null +++ b/arch/um/drivers/slip_common.c @@ -0,0 +1,54 @@ +#include <string.h> +#include "slip_common.h" +#include "net_user.h" + +int slip_proto_read(int fd, void *buf, int len, struct slip_proto *slip) +{ + int i, n, size, start; + + if(slip->more > 0){ + i = 0; + while(i < slip->more){ + size = slip_unesc(slip->ibuf[i++], slip->ibuf, + &slip->pos, &slip->esc); + if(size){ + memcpy(buf, slip->ibuf, size); + memmove(slip->ibuf, &slip->ibuf[i], + slip->more - i); + slip->more = slip->more - i; + return size; + } + } + slip->more = 0; + } + + n = net_read(fd, &slip->ibuf[slip->pos], + sizeof(slip->ibuf) - slip->pos); + if(n <= 0) + return n; + + start = slip->pos; + for(i = 0; i < n; i++){ + size = slip_unesc(slip->ibuf[start + i], slip->ibuf,&slip->pos, + &slip->esc); + if(size){ + memcpy(buf, slip->ibuf, size); + memmove(slip->ibuf, &slip->ibuf[start+i+1], + n - (i + 1)); + slip->more = n - (i + 1); + return size; + } + } + return 0; +} + +int slip_proto_write(int fd, void *buf, int len, struct slip_proto *slip) +{ + int actual, n; + + actual = slip_esc(buf, slip->obuf, len); + n = net_write(fd, slip->obuf, actual); + if(n < 0) + return n; + else return len; +} diff --git a/arch/um/drivers/slip_proto.h b/arch/um/drivers/slip_common.h index 7206361ace4..2ae76d8f1be 100644 --- a/arch/um/drivers/slip_proto.h +++ b/arch/um/drivers/slip_common.h @@ -1,10 +1,10 @@ -/* - * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ +#ifndef __UM_SLIP_COMMON_H +#define __UM_SLIP_COMMON_H -#ifndef __UM_SLIP_PROTO_H__ -#define __UM_SLIP_PROTO_H__ +#define BUF_SIZE 1500 + /* two bytes each for a (pathological) max packet of escaped chars + * + * terminating END char + initial END char */ +#define ENC_BUF_SIZE (2 * BUF_SIZE + 2) /* SLIP protocol characters. */ #define SLIP_END 0300 /* indicates end of frame */ @@ -12,7 +12,8 @@ #define SLIP_ESC_END 0334 /* ESC ESC_END means END 'data' */ #define SLIP_ESC_ESC 0335 /* ESC ESC_ESC means ESC 'data' */ -static inline int slip_unesc(unsigned char c,char *buf,int *pos, int *esc) +static inline int slip_unesc(unsigned char c, unsigned char *buf, int *pos, + int *esc) { int ret; @@ -79,15 +80,25 @@ static inline int slip_esc(unsigned char *s, unsigned char *d, int len) return (ptr - d); } -#endif +struct slip_proto { + unsigned char ibuf[ENC_BUF_SIZE]; + unsigned char obuf[ENC_BUF_SIZE]; + int more; /* more data: do not read fd until ibuf has been drained */ + int pos; + int esc; +}; + +#define SLIP_PROTO_INIT { \ + .ibuf = { '\0' }, \ + .obuf = { '\0' }, \ + .more = 0, \ + .pos = 0, \ + .esc = 0 \ +} -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ +extern int slip_proto_read(int fd, void *buf, int len, + struct slip_proto *slip); +extern int slip_proto_write(int fd, void *buf, int len, + struct slip_proto *slip); + +#endif diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c index 0886eedba21..9a6f5c85f90 100644 --- a/arch/um/drivers/slip_kern.c +++ b/arch/um/drivers/slip_kern.c @@ -26,16 +26,16 @@ void slip_init(struct net_device *dev, void *data) .addr = NULL, .gate_addr = init->gate_addr, .slave = -1, - .ibuf = { '\0' }, - .obuf = { '\0' }, - .pos = 0, - .esc = 0, + .slip = SLIP_PROTO_INIT, .dev = dev }); dev->init = NULL; + dev->header_cache_update = NULL; + dev->hard_header_cache = NULL; + dev->hard_header = NULL; dev->hard_header_len = 0; - dev->addr_len = 4; - dev->type = ARPHRD_ETHER; + dev->addr_len = 0; + dev->type = ARPHRD_SLIP; dev->tx_queue_len = 256; dev->flags = IFF_NOARP; printk("SLIP backend - SLIP IP = %s\n", spri->gate_addr); diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c index d94846b1b4c..71af444e591 100644 --- a/arch/um/drivers/slip_user.c +++ b/arch/um/drivers/slip_user.c @@ -13,7 +13,7 @@ #include "user.h" #include "net_user.h" #include "slip.h" -#include "slip_proto.h" +#include "slip_common.h" #include "helper.h" #include "os.h" @@ -77,41 +77,51 @@ static int slip_tramp(char **argv, int fd) err = os_pipe(fds, 1, 0); if(err < 0){ printk("slip_tramp : pipe failed, err = %d\n", -err); - return(err); + goto out; } err = 0; pe_data.stdin = fd; pe_data.stdout = fds[1]; pe_data.close_me = fds[0]; - pid = run_helper(slip_pre_exec, &pe_data, argv, NULL); + err = run_helper(slip_pre_exec, &pe_data, argv, NULL); + if(err < 0) + goto out_close; + pid = err; + + output_len = page_size(); + output = um_kmalloc(output_len); + if(output == NULL){ + printk("slip_tramp : failed to allocate output buffer\n"); + os_kill_process(pid, 1); + err = -ENOMEM; + goto out_free; + } - if(pid < 0) err = pid; - else { - output_len = page_size(); - output = um_kmalloc(output_len); - if(output == NULL) - printk("slip_tramp : failed to allocate output " - "buffer\n"); - - os_close_file(fds[1]); - read_output(fds[0], output, output_len); - if(output != NULL){ - printk("%s", output); - kfree(output); - } - CATCH_EINTR(err = waitpid(pid, &status, 0)); - if(err < 0) - err = errno; - else if(!WIFEXITED(status) || (WEXITSTATUS(status) != 0)){ - printk("'%s' didn't exit with status 0\n", argv[0]); - err = -EINVAL; - } + os_close_file(fds[1]); + read_output(fds[0], output, output_len); + printk("%s", output); + + CATCH_EINTR(err = waitpid(pid, &status, 0)); + if(err < 0) + err = errno; + else if(!WIFEXITED(status) || (WEXITSTATUS(status) != 0)){ + printk("'%s' didn't exit with status 0\n", argv[0]); + err = -EINVAL; } + else err = 0; os_close_file(fds[0]); - return(err); +out_free: + kfree(output); + return err; + +out_close: + os_close_file(fds[0]); + os_close_file(fds[1]); +out: + return err; } static int slip_open(void *data) @@ -123,21 +133,26 @@ static int slip_open(void *data) NULL }; int sfd, mfd, err; - mfd = get_pty(); - if(mfd < 0){ - printk("umn : Failed to open pty, err = %d\n", -mfd); - return(mfd); + err = get_pty(); + if(err < 0){ + printk("slip-open : Failed to open pty, err = %d\n", -err); + goto out; } - sfd = os_open_file(ptsname(mfd), of_rdwr(OPENFLAGS()), 0); - if(sfd < 0){ - printk("Couldn't open tty for slip line, err = %d\n", -sfd); - os_close_file(mfd); - return(sfd); + mfd = err; + + err = os_open_file(ptsname(mfd), of_rdwr(OPENFLAGS()), 0); + if(err < 0){ + printk("Couldn't open tty for slip line, err = %d\n", -err); + goto out_close; } - if(set_up_tty(sfd)) return(-1); + sfd = err; + + if(set_up_tty(sfd)) + goto out_close2; + pri->slave = sfd; - pri->pos = 0; - pri->esc = 0; + pri->slip.pos = 0; + pri->slip.esc = 0; if(pri->gate_addr != NULL){ sprintf(version_buf, "%d", UML_NET_VERSION); strcpy(gate_buf, pri->gate_addr); @@ -146,12 +161,12 @@ static int slip_open(void *data) if(err < 0){ printk("slip_tramp failed - err = %d\n", -err); - return(err); + goto out_close2; } err = os_get_ifname(pri->slave, pri->name); if(err < 0){ printk("get_ifname failed, err = %d\n", -err); - return(err); + goto out_close2; } iter_addresses(pri->dev, open_addr, pri->name); } @@ -160,10 +175,16 @@ static int slip_open(void *data) if(err < 0){ printk("Failed to set slip discipline encapsulation - " "err = %d\n", -err); - return(err); + goto out_close2; } } return(mfd); +out_close2: + os_close_file(sfd); +out_close: + os_close_file(mfd); +out: + return err; } static void slip_close(int fd, void *data) @@ -190,48 +211,12 @@ static void slip_close(int fd, void *data) int slip_user_read(int fd, void *buf, int len, struct slip_data *pri) { - int i, n, size, start; - - if(pri->more>0) { - i = 0; - while(i < pri->more) { - size = slip_unesc(pri->ibuf[i++], - pri->ibuf, &pri->pos, &pri->esc); - if(size){ - memcpy(buf, pri->ibuf, size); - memmove(pri->ibuf, &pri->ibuf[i], pri->more-i); - pri->more=pri->more-i; - return(size); - } - } - pri->more=0; - } - - n = net_read(fd, &pri->ibuf[pri->pos], sizeof(pri->ibuf) - pri->pos); - if(n <= 0) return(n); - - start = pri->pos; - for(i = 0; i < n; i++){ - size = slip_unesc(pri->ibuf[start + i], - pri->ibuf, &pri->pos, &pri->esc); - if(size){ - memcpy(buf, pri->ibuf, size); - memmove(pri->ibuf, &pri->ibuf[start+i+1], n-(i+1)); - pri->more=n-(i+1); - return(size); - } - } - return(0); + return slip_proto_read(fd, buf, len, &pri->slip); } int slip_user_write(int fd, void *buf, int len, struct slip_data *pri) { - int actual, n; - - actual = slip_esc(buf, pri->obuf, len); - n = net_write(fd, pri->obuf, actual); - if(n < 0) return(n); - else return(len); + return slip_proto_write(fd, buf, len, &pri->slip); } static int slip_set_mtu(int mtu, void *data) @@ -267,14 +252,3 @@ struct net_user_info slip_user_info = { .delete_address = slip_del_addr, .max_packet = BUF_SIZE }; - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/drivers/slirp.h b/arch/um/drivers/slirp.h index 04e407d1e44..6cf88ab580c 100644 --- a/arch/um/drivers/slirp.h +++ b/arch/um/drivers/slirp.h @@ -1,10 +1,7 @@ #ifndef __UM_SLIRP_H #define __UM_SLIRP_H -#define BUF_SIZE 1500 - /* two bytes each for a (pathological) max packet of escaped chars + * - * terminating END char + initial END char */ -#define ENC_BUF_SIZE (2 * BUF_SIZE + 2) +#include "slip_common.h" #define SLIRP_MAX_ARGS 100 /* @@ -24,28 +21,13 @@ struct slirp_data { struct arg_list_dummy_wrapper argw; int pid; int slave; - char ibuf[ENC_BUF_SIZE]; - char obuf[ENC_BUF_SIZE]; - int more; /* more data: do not read fd until ibuf has been drained */ - int pos; - int esc; + struct slip_proto slip; }; extern struct net_user_info slirp_user_info; -extern int set_umn_addr(int fd, char *addr, char *ptp_addr); extern int slirp_user_read(int fd, void *buf, int len, struct slirp_data *pri); -extern int slirp_user_write(int fd, void *buf, int len, struct slirp_data *pri); +extern int slirp_user_write(int fd, void *buf, int len, + struct slirp_data *pri); #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c index c9d6b52a831..9864d27afdb 100644 --- a/arch/um/drivers/slirp_kern.c +++ b/arch/um/drivers/slirp_kern.c @@ -25,10 +25,7 @@ void slirp_init(struct net_device *dev, void *data) { .argw = init->argw, .pid = -1, .slave = -1, - .ibuf = { '\0' }, - .obuf = { '\0' }, - .pos = 0, - .esc = 0, + .slip = SLIP_PROTO_INIT, .dev = dev }); dev->init = NULL; diff --git a/arch/um/drivers/slirp_user.c b/arch/um/drivers/slirp_user.c index c322515c71c..8d91f663d82 100644 --- a/arch/um/drivers/slirp_user.c +++ b/arch/um/drivers/slirp_user.c @@ -12,7 +12,7 @@ #include "user.h" #include "net_user.h" #include "slirp.h" -#include "slip_proto.h" +#include "slip_common.h" #include "helper.h" #include "os.h" @@ -48,47 +48,32 @@ static int slirp_tramp(char **argv, int fd) return(pid); } -/* XXX This is just a trivial wrapper around os_pipe */ -static int slirp_datachan(int *mfd, int *sfd) -{ - int fds[2], err; - - err = os_pipe(fds, 1, 1); - if(err < 0){ - printk("slirp_datachan: Failed to open pipe, err = %d\n", -err); - return(err); - } - - *mfd = fds[0]; - *sfd = fds[1]; - return(0); -} - static int slirp_open(void *data) { struct slirp_data *pri = data; - int sfd, mfd, pid, err; + int fds[2], pid, err; - err = slirp_datachan(&mfd, &sfd); + err = os_pipe(fds, 1, 1); if(err) return(err); - pid = slirp_tramp(pri->argw.argv, sfd); - - if(pid < 0){ - printk("slirp_tramp failed - errno = %d\n", -pid); - os_close_file(sfd); - os_close_file(mfd); - return(pid); + err = slirp_tramp(pri->argw.argv, fds[1]); + if(err < 0){ + printk("slirp_tramp failed - errno = %d\n", -err); + goto out; } - - pri->slave = sfd; - pri->pos = 0; - pri->esc = 0; - - pri->pid = pid; - - return(mfd); + pid = err; + + pri->slave = fds[1]; + pri->slip.pos = 0; + pri->slip.esc = 0; + pri->pid = err; + + return(fds[0]); +out: + os_close_file(fds[0]); + os_close_file(fds[1]); + return err; } static void slirp_close(int fd, void *data) @@ -129,48 +114,12 @@ static void slirp_close(int fd, void *data) int slirp_user_read(int fd, void *buf, int len, struct slirp_data *pri) { - int i, n, size, start; - - if(pri->more>0) { - i = 0; - while(i < pri->more) { - size = slip_unesc(pri->ibuf[i++], - pri->ibuf,&pri->pos,&pri->esc); - if(size){ - memcpy(buf, pri->ibuf, size); - memmove(pri->ibuf, &pri->ibuf[i], pri->more-i); - pri->more=pri->more-i; - return(size); - } - } - pri->more=0; - } - - n = net_read(fd, &pri->ibuf[pri->pos], sizeof(pri->ibuf) - pri->pos); - if(n <= 0) return(n); - - start = pri->pos; - for(i = 0; i < n; i++){ - size = slip_unesc(pri->ibuf[start + i], - pri->ibuf,&pri->pos,&pri->esc); - if(size){ - memcpy(buf, pri->ibuf, size); - memmove(pri->ibuf, &pri->ibuf[start+i+1], n-(i+1)); - pri->more=n-(i+1); - return(size); - } - } - return(0); + return slip_proto_read(fd, buf, len, &pri->slip); } int slirp_user_write(int fd, void *buf, int len, struct slirp_data *pri) { - int actual, n; - - actual = slip_esc(buf, pri->obuf, len); - n = net_write(fd, pri->obuf, actual); - if(n < 0) return(n); - else return(len); + return slip_proto_write(fd, buf, len, &pri->slip); } static int slirp_set_mtu(int mtu, void *data) @@ -188,14 +137,3 @@ struct net_user_info slirp_user_info = { .delete_address = NULL, .max_packet = BUF_SIZE }; - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c index a2bac429f3d..b32a77010fb 100644 --- a/arch/um/drivers/ssl.c +++ b/arch/um/drivers/ssl.c @@ -22,7 +22,6 @@ #include "init.h" #include "irq_user.h" #include "mconsole_kern.h" -#include "2_5compat.h" static int ssl_version = 1; diff --git a/arch/um/drivers/stderr_console.c b/arch/um/drivers/stderr_console.c index 98565b53d17..429ae8e6c7e 100644 --- a/arch/um/drivers/stderr_console.c +++ b/arch/um/drivers/stderr_console.c @@ -22,9 +22,9 @@ static void stderr_console_write(struct console *console, const char *string, } static struct console stderr_console = { - .name "stderr", - .write stderr_console_write, - .flags CON_PRINTBUFFER, + .name = "stderr", + .write = stderr_console_write, + .flags = CON_PRINTBUFFER, }; static int __init stderr_console_init(void) diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c index 361d0be342b..afbe1e71ed8 100644 --- a/arch/um/drivers/stdio_console.c +++ b/arch/um/drivers/stdio_console.c @@ -28,7 +28,6 @@ #include "irq_user.h" #include "mconsole_kern.h" #include "init.h" -#include "2_5compat.h" #define MAX_TTYS (16) diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 9a56ff94308..2a7f6892c55 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -49,13 +49,12 @@ #include "irq_user.h" #include "irq_kern.h" #include "ubd_user.h" -#include "2_5compat.h" #include "os.h" #include "mem.h" #include "mem_kern.h" #include "cow.h" -enum ubd_req { UBD_READ, UBD_WRITE, UBD_MMAP }; +enum ubd_req { UBD_READ, UBD_WRITE }; struct io_thread_req { enum ubd_req op; @@ -68,8 +67,6 @@ struct io_thread_req { unsigned long sector_mask; unsigned long long cow_offset; unsigned long bitmap_words[2]; - int map_fd; - unsigned long long map_offset; int error; }; @@ -122,10 +119,6 @@ static int ubd_ioctl(struct inode * inode, struct file * file, #define MAX_DEV (8) -/* Changed in early boot */ -static int ubd_do_mmap = 0; -#define UBD_MMAP_BLOCK_SIZE PAGE_SIZE - static struct block_device_operations ubd_blops = { .owner = THIS_MODULE, .open = ubd_open, @@ -175,12 +168,6 @@ struct ubd { int no_cow; struct cow cow; struct platform_device pdev; - - int map_writes; - int map_reads; - int nomap_writes; - int nomap_reads; - int write_maps; }; #define DEFAULT_COW { \ @@ -200,11 +187,6 @@ struct ubd { .openflags = OPEN_FLAGS, \ .no_cow = 0, \ .cow = DEFAULT_COW, \ - .map_writes = 0, \ - .map_reads = 0, \ - .nomap_writes = 0, \ - .nomap_reads = 0, \ - .write_maps = 0, \ } struct ubd ubd_dev[MAX_DEV] = { [ 0 ... MAX_DEV - 1 ] = DEFAULT_UBD }; @@ -314,13 +296,6 @@ static int ubd_setup_common(char *str, int *index_out) int major; str++; - if(!strcmp(str, "mmap")){ - CHOOSE_MODE(printk("mmap not supported by the ubd " - "driver in tt mode\n"), - ubd_do_mmap = 1); - return(0); - } - if(!strcmp(str, "sync")){ global_openflags = of_sync(global_openflags); return(0); @@ -464,9 +439,9 @@ static int udb_setup(char *str) __setup("udb", udb_setup); __uml_help(udb_setup, "udb\n" -" This option is here solely to catch ubd -> udb typos, which can be\n\n" -" to impossible to catch visually unless you specifically look for\n\n" -" them. The only result of any option starting with 'udb' is an error\n\n" +" This option is here solely to catch ubd -> udb typos, which can be\n" +" to impossible to catch visually unless you specifically look for\n" +" them. The only result of any option starting with 'udb' is an error\n" " in the boot output.\n\n" ); @@ -524,7 +499,7 @@ static void ubd_handler(void) { struct io_thread_req req; struct request *rq = elv_next_request(ubd_queue); - int n, err; + int n; do_ubd = NULL; intr_count++; @@ -538,19 +513,6 @@ static void ubd_handler(void) return; } - if((req.op != UBD_MMAP) && - ((req.offset != ((__u64) (rq->sector)) << 9) || - (req.length != (rq->current_nr_sectors) << 9))) - panic("I/O op mismatch"); - - if(req.map_fd != -1){ - err = physmem_subst_mapping(req.buffer, req.map_fd, - req.map_offset, 1); - if(err) - printk("ubd_handler - physmem_subst_mapping failed, " - "err = %d\n", -err); - } - ubd_finish(rq, req.error); reactivate_fd(thread_fd, UBD_IRQ); do_ubd_request(ubd_queue); @@ -583,14 +545,10 @@ static int ubd_file_size(struct ubd *dev, __u64 *size_out) static void ubd_close(struct ubd *dev) { - if(ubd_do_mmap) - physmem_forget_descriptor(dev->fd); os_close_file(dev->fd); if(dev->cow.file == NULL) return; - if(ubd_do_mmap) - physmem_forget_descriptor(dev->cow.fd); os_close_file(dev->cow.fd); vfree(dev->cow.bitmap); dev->cow.bitmap = NULL; @@ -1010,94 +968,13 @@ static void cowify_req(struct io_thread_req *req, unsigned long *bitmap, req->bitmap_words, bitmap_len); } -static int mmap_fd(struct request *req, struct ubd *dev, __u64 offset) -{ - __u64 sector; - unsigned char *bitmap; - int bit, i; - - /* mmap must have been requested on the command line */ - if(!ubd_do_mmap) - return(-1); - - /* The buffer must be page aligned */ - if(((unsigned long) req->buffer % UBD_MMAP_BLOCK_SIZE) != 0) - return(-1); - - /* The request must be a page long */ - if((req->current_nr_sectors << 9) != PAGE_SIZE) - return(-1); - - if(dev->cow.file == NULL) - return(dev->fd); - - sector = offset >> 9; - bitmap = (unsigned char *) dev->cow.bitmap; - bit = ubd_test_bit(sector, bitmap); - - for(i = 1; i < req->current_nr_sectors; i++){ - if(ubd_test_bit(sector + i, bitmap) != bit) - return(-1); - } - - if(bit || (rq_data_dir(req) == WRITE)) - offset += dev->cow.data_offset; - - /* The data on disk must be page aligned */ - if((offset % UBD_MMAP_BLOCK_SIZE) != 0) - return(-1); - - return(bit ? dev->fd : dev->cow.fd); -} - -static int prepare_mmap_request(struct ubd *dev, int fd, __u64 offset, - struct request *req, - struct io_thread_req *io_req) -{ - int err; - - if(rq_data_dir(req) == WRITE){ - /* Writes are almost no-ops since the new data is already in the - * host page cache - */ - dev->map_writes++; - if(dev->cow.file != NULL) - cowify_bitmap(io_req->offset, io_req->length, - &io_req->sector_mask, &io_req->cow_offset, - dev->cow.bitmap, dev->cow.bitmap_offset, - io_req->bitmap_words, - dev->cow.bitmap_len); - } - else { - int w; - - if((dev->cow.file != NULL) && (fd == dev->cow.fd)) - w = 0; - else w = dev->openflags.w; - - if((dev->cow.file != NULL) && (fd == dev->fd)) - offset += dev->cow.data_offset; - - err = physmem_subst_mapping(req->buffer, fd, offset, w); - if(err){ - printk("physmem_subst_mapping failed, err = %d\n", - -err); - return(1); - } - dev->map_reads++; - } - io_req->op = UBD_MMAP; - io_req->buffer = req->buffer; - return(0); -} - /* Called with ubd_io_lock held */ static int prepare_request(struct request *req, struct io_thread_req *io_req) { struct gendisk *disk = req->rq_disk; struct ubd *dev = disk->private_data; __u64 offset; - int len, fd; + int len; if(req->rq_status == RQ_INACTIVE) return(1); @@ -1114,34 +991,12 @@ static int prepare_request(struct request *req, struct io_thread_req *io_req) io_req->fds[0] = (dev->cow.file != NULL) ? dev->cow.fd : dev->fd; io_req->fds[1] = dev->fd; - io_req->map_fd = -1; io_req->cow_offset = -1; io_req->offset = offset; io_req->length = len; io_req->error = 0; io_req->sector_mask = 0; - fd = mmap_fd(req, dev, io_req->offset); - if(fd > 0){ - /* If mmapping is otherwise OK, but the first access to the - * page is a write, then it's not mapped in yet. So we have - * to write the data to disk first, then we can map the disk - * page in and continue normally from there. - */ - if((rq_data_dir(req) == WRITE) && !is_remapped(req->buffer)){ - io_req->map_fd = dev->fd; - io_req->map_offset = io_req->offset + - dev->cow.data_offset; - dev->write_maps++; - } - else return(prepare_mmap_request(dev, fd, io_req->offset, req, - io_req)); - } - - if(rq_data_dir(req) == READ) - dev->nomap_reads++; - else dev->nomap_writes++; - io_req->op = (rq_data_dir(req) == READ) ? UBD_READ : UBD_WRITE; io_req->offsets[0] = 0; io_req->offsets[1] = dev->cow.data_offset; @@ -1229,143 +1084,6 @@ static int ubd_ioctl(struct inode * inode, struct file * file, return(-EINVAL); } -static int ubd_check_remapped(int fd, unsigned long address, int is_write, - __u64 offset) -{ - __u64 bitmap_offset; - unsigned long new_bitmap[2]; - int i, err, n; - - /* If it's not a write access, we can't do anything about it */ - if(!is_write) - return(0); - - /* We have a write */ - for(i = 0; i < sizeof(ubd_dev) / sizeof(ubd_dev[0]); i++){ - struct ubd *dev = &ubd_dev[i]; - - if((dev->fd != fd) && (dev->cow.fd != fd)) - continue; - - /* It's a write to a ubd device */ - - /* This should be impossible now */ - if(!dev->openflags.w){ - /* It's a write access on a read-only device - probably - * shouldn't happen. If the kernel is trying to change - * something with no intention of writing it back out, - * then this message will clue us in that this needs - * fixing - */ - printk("Write access to mapped page from readonly ubd " - "device %d\n", i); - return(0); - } - - /* It's a write to a writeable ubd device - it must be COWed - * because, otherwise, the page would have been mapped in - * writeable - */ - - if(!dev->cow.file) - panic("Write fault on writeable non-COW ubd device %d", - i); - - /* It should also be an access to the backing file since the - * COW pages should be mapped in read-write - */ - - if(fd == dev->fd) - panic("Write fault on a backing page of ubd " - "device %d\n", i); - - /* So, we do the write, copying the backing data to the COW - * file... - */ - - err = os_seek_file(dev->fd, offset + dev->cow.data_offset); - if(err < 0) - panic("Couldn't seek to %lld in COW file of ubd " - "device %d, err = %d", - offset + dev->cow.data_offset, i, -err); - - n = os_write_file(dev->fd, (void *) address, PAGE_SIZE); - if(n != PAGE_SIZE) - panic("Couldn't copy data to COW file of ubd " - "device %d, err = %d", i, -n); - - /* ... updating the COW bitmap... */ - - cowify_bitmap(offset, PAGE_SIZE, NULL, &bitmap_offset, - dev->cow.bitmap, dev->cow.bitmap_offset, - new_bitmap, dev->cow.bitmap_len); - - err = os_seek_file(dev->fd, bitmap_offset); - if(err < 0) - panic("Couldn't seek to %lld in COW file of ubd " - "device %d, err = %d", bitmap_offset, i, -err); - - n = os_write_file(dev->fd, new_bitmap, sizeof(new_bitmap)); - if(n != sizeof(new_bitmap)) - panic("Couldn't update bitmap of ubd device %d, " - "err = %d", i, -n); - - /* Maybe we can map the COW page in, and maybe we can't. If - * it is a pre-V3 COW file, we can't, since the alignment will - * be wrong. If it is a V3 or later COW file which has been - * moved to a system with a larger page size, then maybe we - * can't, depending on the exact location of the page. - */ - - offset += dev->cow.data_offset; - - /* Remove the remapping, putting the original anonymous page - * back. If the COW file can be mapped in, that is done. - * Otherwise, the COW page is read in. - */ - - if(!physmem_remove_mapping((void *) address)) - panic("Address 0x%lx not remapped by ubd device %d", - address, i); - if((offset % UBD_MMAP_BLOCK_SIZE) == 0) - physmem_subst_mapping((void *) address, dev->fd, - offset, 1); - else { - err = os_seek_file(dev->fd, offset); - if(err < 0) - panic("Couldn't seek to %lld in COW file of " - "ubd device %d, err = %d", offset, i, - -err); - - n = os_read_file(dev->fd, (void *) address, PAGE_SIZE); - if(n != PAGE_SIZE) - panic("Failed to read page from offset %llx of " - "COW file of ubd device %d, err = %d", - offset, i, -n); - } - - return(1); - } - - /* It's not a write on a ubd device */ - return(0); -} - -static struct remapper ubd_remapper = { - .list = LIST_HEAD_INIT(ubd_remapper.list), - .proc = ubd_check_remapped, -}; - -static int ubd_remapper_setup(void) -{ - if(ubd_do_mmap) - register_remapper(&ubd_remapper); - - return(0); -} - -__initcall(ubd_remapper_setup); - static int same_backing_files(char *from_cmdline, char *from_cow, char *cow) { struct uml_stat buf1, buf2; @@ -1568,15 +1286,6 @@ void do_io(struct io_thread_req *req) int err; __u64 off; - if(req->op == UBD_MMAP){ - /* Touch the page to force the host to do any necessary IO to - * get it into memory - */ - n = *((volatile int *) req->buffer); - req->error = update_bitmap(req); - return; - } - nsectors = req->length / req->sectorsize; start = 0; do { diff --git a/arch/um/drivers/xterm_kern.c b/arch/um/drivers/xterm_kern.c index a4fdf3584ad..d269a80f4b0 100644 --- a/arch/um/drivers/xterm_kern.c +++ b/arch/um/drivers/xterm_kern.c @@ -69,7 +69,6 @@ int xterm_fd(int socket, int *pid_out) * isn't set) this will hang... */ wait_for_completion(&data->ready); - free_irq_by_irq_and_dev(XTERM_IRQ, data); free_irq(XTERM_IRQ, data); ret = data->new_fd; diff --git a/arch/um/include/2_5compat.h b/arch/um/include/2_5compat.h deleted file mode 100644 index abdb015a4d7..00000000000 --- a/arch/um/include/2_5compat.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) 2001 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#ifndef __2_5_COMPAT_H__ -#define __2_5_COMPAT_H__ - -#define INIT_HARDSECT(arr, maj, sizes) - -#define SET_PRI(task) do ; while(0) - -#endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/include/mconsole.h b/arch/um/include/mconsole.h index 9fbe3083fdd..cfa368e045a 100644 --- a/arch/um/include/mconsole.h +++ b/arch/um/include/mconsole.h @@ -56,7 +56,7 @@ struct mc_request int as_interrupt; int originating_fd; - int originlen; + unsigned int originlen; unsigned char origin[128]; /* sockaddr_un */ struct mconsole_request request; diff --git a/arch/um/include/net_user.h b/arch/um/include/net_user.h index 36807b796e9..89885a77a77 100644 --- a/arch/um/include/net_user.h +++ b/arch/um/include/net_user.h @@ -35,7 +35,7 @@ extern void *get_output_buffer(int *len_out); extern void free_output_buffer(void *buffer); extern int tap_open_common(void *dev, char *gate_addr); -extern void tap_check_ips(char *gate_addr, char *eth_addr); +extern void tap_check_ips(char *gate_addr, unsigned char *eth_addr); extern void read_output(int fd, char *output_out, int len); diff --git a/arch/um/include/os.h b/arch/um/include/os.h index d246d5a2460..881d2988d2d 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -136,7 +136,7 @@ extern int os_seek_file(int fd, __u64 offset); extern int os_open_file(char *file, struct openflags flags, int mode); extern int os_read_file(int fd, void *buf, int len); extern int os_write_file(int fd, const void *buf, int count); -extern int os_file_size(char *file, long long *size_out); +extern int os_file_size(char *file, unsigned long long *size_out); extern int os_file_modtime(char *file, unsigned long *modtime); extern int os_pipe(int *fd, int stream, int close_on_exec); extern int os_set_fd_async(int fd, int owner); diff --git a/arch/um/include/sysdep-i386/ptrace.h b/arch/um/include/sysdep-i386/ptrace.h index 84ec7ff5cf8..c8ee9559f3a 100644 --- a/arch/um/include/sysdep-i386/ptrace.h +++ b/arch/um/include/sysdep-i386/ptrace.h @@ -8,6 +8,8 @@ #include "uml-config.h" #include "user_constants.h" +#include "sysdep/faultinfo.h" +#include "choose-mode.h" #define MAX_REG_NR (UM_FRAME_SIZE / sizeof(unsigned long)) #define MAX_REG_OFFSET (UM_FRAME_SIZE) @@ -31,7 +33,6 @@ extern int sysemu_supported; #ifdef UML_CONFIG_MODE_SKAS #include "skas_ptregs.h" -#include "sysdep/faultinfo.h" #define REGS_IP(r) ((r)[HOST_IP]) #define REGS_SP(r) ((r)[HOST_SP]) @@ -59,8 +60,6 @@ extern int sysemu_supported; #define PTRACE_SYSEMU_SINGLESTEP 32 #endif -#include "choose-mode.h" - union uml_pt_regs { #ifdef UML_CONFIG_MODE_TT struct tt_regs { diff --git a/arch/um/include/sysdep-x86_64/checksum.h b/arch/um/include/sysdep-x86_64/checksum.h index 572c6c19be3..ea97005af69 100644 --- a/arch/um/include/sysdep-x86_64/checksum.h +++ b/arch/um/include/sysdep-x86_64/checksum.h @@ -9,8 +9,6 @@ #include "linux/in6.h" #include "asm/uaccess.h" -extern unsigned int csum_partial_copy_from(const unsigned char *src, unsigned char *dst, int len, - int sum, int *err_ptr); extern unsigned csum_partial(const unsigned char *buff, unsigned len, unsigned sum); @@ -31,10 +29,15 @@ unsigned int csum_partial_copy_nocheck(const unsigned char *src, unsigned char * } static __inline__ -unsigned int csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst, - int len, int sum, int *err_ptr) +unsigned int csum_partial_copy_from_user(const unsigned char *src, + unsigned char *dst, int len, int sum, + int *err_ptr) { - return csum_partial_copy_from(src, dst, len, sum, err_ptr); + if(copy_from_user(dst, src, len)){ + *err_ptr = -EFAULT; + return(-1); + } + return csum_partial(dst, len, sum); } /** @@ -137,15 +140,6 @@ static inline unsigned add32_with_carry(unsigned a, unsigned b) return a; } -#endif +extern unsigned short ip_compute_csum(unsigned char * buff, int len); -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ +#endif diff --git a/arch/um/include/sysdep-x86_64/ptrace.h b/arch/um/include/sysdep-x86_64/ptrace.h index 348e8fcd513..be8acd5efd9 100644 --- a/arch/um/include/sysdep-x86_64/ptrace.h +++ b/arch/um/include/sysdep-x86_64/ptrace.h @@ -135,6 +135,7 @@ extern int mode_tt; __CHOOSE_MODE(SC_EFLAGS(UPT_SC(r)), REGS_EFLAGS((r)->skas.regs)) #define UPT_SC(r) ((r)->tt.sc) #define UPT_SYSCALL_NR(r) __CHOOSE_MODE((r)->tt.syscall, (r)->skas.syscall) +#define UPT_SYSCALL_RET(r) UPT_RAX(r) extern int user_context(unsigned long sp); @@ -196,32 +197,32 @@ struct syscall_args { #define UPT_SET(regs, reg, val) \ - ({ unsigned long val; \ + ({ unsigned long __upt_val = val; \ switch(reg){ \ - case R8: UPT_R8(regs) = val; break; \ - case R9: UPT_R9(regs) = val; break; \ - case R10: UPT_R10(regs) = val; break; \ - case R11: UPT_R11(regs) = val; break; \ - case R12: UPT_R12(regs) = val; break; \ - case R13: UPT_R13(regs) = val; break; \ - case R14: UPT_R14(regs) = val; break; \ - case R15: UPT_R15(regs) = val; break; \ - case RIP: UPT_IP(regs) = val; break; \ - case RSP: UPT_SP(regs) = val; break; \ - case RAX: UPT_RAX(regs) = val; break; \ - case RBX: UPT_RBX(regs) = val; break; \ - case RCX: UPT_RCX(regs) = val; break; \ - case RDX: UPT_RDX(regs) = val; break; \ - case RSI: UPT_RSI(regs) = val; break; \ - case RDI: UPT_RDI(regs) = val; break; \ - case RBP: UPT_RBP(regs) = val; break; \ - case ORIG_RAX: UPT_ORIG_RAX(regs) = val; break; \ - case CS: UPT_CS(regs) = val; break; \ - case DS: UPT_DS(regs) = val; break; \ - case ES: UPT_ES(regs) = val; break; \ - case FS: UPT_FS(regs) = val; break; \ - case GS: UPT_GS(regs) = val; break; \ - case EFLAGS: UPT_EFLAGS(regs) = val; break; \ + case R8: UPT_R8(regs) = __upt_val; break; \ + case R9: UPT_R9(regs) = __upt_val; break; \ + case R10: UPT_R10(regs) = __upt_val; break; \ + case R11: UPT_R11(regs) = __upt_val; break; \ + case R12: UPT_R12(regs) = __upt_val; break; \ + case R13: UPT_R13(regs) = __upt_val; break; \ + case R14: UPT_R14(regs) = __upt_val; break; \ + case R15: UPT_R15(regs) = __upt_val; break; \ + case RIP: UPT_IP(regs) = __upt_val; break; \ + case RSP: UPT_SP(regs) = __upt_val; break; \ + case RAX: UPT_RAX(regs) = __upt_val; break; \ + case RBX: UPT_RBX(regs) = __upt_val; break; \ + case RCX: UPT_RCX(regs) = __upt_val; break; \ + case RDX: UPT_RDX(regs) = __upt_val; break; \ + case RSI: UPT_RSI(regs) = __upt_val; break; \ + case RDI: UPT_RDI(regs) = __upt_val; break; \ + case RBP: UPT_RBP(regs) = __upt_val; break; \ + case ORIG_RAX: UPT_ORIG_RAX(regs) = __upt_val; break; \ + case CS: UPT_CS(regs) = __upt_val; break; \ + case DS: UPT_DS(regs) = __upt_val; break; \ + case ES: UPT_ES(regs) = __upt_val; break; \ + case FS: UPT_FS(regs) = __upt_val; break; \ + case GS: UPT_GS(regs) = __upt_val; break; \ + case EFLAGS: UPT_EFLAGS(regs) = __upt_val; break; \ default : \ panic("Bad register in UPT_SET : %d\n", reg); \ break; \ @@ -245,14 +246,3 @@ struct syscall_args { CHOOSE_MODE((&(r)->tt.faultinfo), (&(r)->skas.faultinfo)) #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/include/sysrq.h b/arch/um/include/sysrq.h index 2ce9423460b..c8d332b56b9 100644 --- a/arch/um/include/sysrq.h +++ b/arch/um/include/sysrq.h @@ -1,6 +1,7 @@ #ifndef __UM_SYSRQ_H #define __UM_SYSRQ_H -extern void show_trace(unsigned long *stack); +struct task_struct; +extern void show_trace(struct task_struct* task, unsigned long *stack); #endif diff --git a/arch/um/include/user_util.h b/arch/um/include/user_util.h index b8c5b8a9525..7b6a24dfd30 100644 --- a/arch/um/include/user_util.h +++ b/arch/um/include/user_util.h @@ -41,9 +41,6 @@ extern unsigned long highmem; extern char host_info[]; extern char saved_command_line[]; -extern char command_line[]; - -extern char *tempdir; extern unsigned long _stext, _etext, _sdata, _edata, __bss_start, _end; extern unsigned long _unprotected_end; diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile index 9736ca27c5f..a8918e80df9 100644 --- a/arch/um/kernel/Makefile +++ b/arch/um/kernel/Makefile @@ -14,7 +14,7 @@ obj-y = config.o exec_kern.o exitcode.o \ tlb.o trap_kern.o trap_user.o uaccess_user.o um_arch.o umid.o \ user_util.o -obj-$(CONFIG_BLK_DEV_INITRD) += initrd_kern.o initrd_user.o +obj-$(CONFIG_BLK_DEV_INITRD) += initrd.o obj-$(CONFIG_GPROF) += gprof_syms.o obj-$(CONFIG_GCOV) += gmon_syms.o obj-$(CONFIG_TTY_LOG) += tty_log.o diff --git a/arch/um/kernel/checksum.c b/arch/um/kernel/checksum.c deleted file mode 100644 index e69de29bb2d..00000000000 --- a/arch/um/kernel/checksum.c +++ /dev/null diff --git a/arch/um/kernel/exec_kern.c b/arch/um/kernel/exec_kern.c index 49ddabe69be..efd222ffe20 100644 --- a/arch/um/kernel/exec_kern.c +++ b/arch/um/kernel/exec_kern.c @@ -16,7 +16,6 @@ #include "kern.h" #include "irq_user.h" #include "tlb.h" -#include "2_5compat.h" #include "os.h" #include "time_user.h" #include "choose-mode.h" diff --git a/arch/um/kernel/initrd_kern.c b/arch/um/kernel/initrd.c index fc568af468b..82ecf904b09 100644 --- a/arch/um/kernel/initrd_kern.c +++ b/arch/um/kernel/initrd.c @@ -41,12 +41,31 @@ static int __init uml_initrd_setup(char *line, int *add) return 0; } -__uml_setup("initrd=", uml_initrd_setup, +__uml_setup("initrd=", uml_initrd_setup, "initrd=<initrd image>\n" " This is used to boot UML from an initrd image. The argument is the\n" " name of the file containing the image.\n\n" ); +int load_initrd(char *filename, void *buf, int size) +{ + int fd, n; + + fd = os_open_file(filename, of_read(OPENFLAGS()), 0); + if(fd < 0){ + printk("Opening '%s' failed - err = %d\n", filename, -fd); + return(-1); + } + n = os_read_file(fd, buf, size); + if(n != size){ + printk("Read of %d bytes from '%s' failed, err = %d\n", size, + filename, -n); + return(-1); + } + + os_close_file(fd); + return(0); +} /* * Overrides for Emacs so that we follow Linus's tabbing style. * Emacs will notice this stuff at the end of the file and automatically diff --git a/arch/um/kernel/initrd_user.c b/arch/um/kernel/initrd_user.c deleted file mode 100644 index cb90681e151..00000000000 --- a/arch/um/kernel/initrd_user.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include <unistd.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <errno.h> - -#include "user_util.h" -#include "kern_util.h" -#include "user.h" -#include "initrd.h" -#include "os.h" - -int load_initrd(char *filename, void *buf, int size) -{ - int fd, n; - - fd = os_open_file(filename, of_read(OPENFLAGS()), 0); - if(fd < 0){ - printk("Opening '%s' failed - err = %d\n", filename, -fd); - return(-1); - } - n = os_read_file(fd, buf, size); - if(n != size){ - printk("Read of %d bytes from '%s' failed, err = %d\n", size, - filename, -n); - return(-1); - } - - os_close_file(fd); - return(0); -} - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c index d44fb528254..9f18061ef4c 100644 --- a/arch/um/kernel/irq.c +++ b/arch/um/kernel/irq.c @@ -124,14 +124,16 @@ void irq_unlock(unsigned long flags) spin_unlock_irqrestore(&irq_spinlock, flags); } -/* presently hw_interrupt_type must define (startup || enable) && - * disable && end */ +/* hw_interrupt_type must define (startup || enable) && + * (shutdown || disable) && end */ static void dummy(unsigned int irq) { } -static struct hw_interrupt_type SIGIO_irq_type = { +/* This is used for everything else than the timer. */ +static struct hw_interrupt_type normal_irq_type = { .typename = "SIGIO", + .release = free_irq_by_irq_and_dev, .disable = dummy, .enable = dummy, .ack = dummy, @@ -140,6 +142,7 @@ static struct hw_interrupt_type SIGIO_irq_type = { static struct hw_interrupt_type SIGVTALRM_irq_type = { .typename = "SIGVTALRM", + .release = free_irq_by_irq_and_dev, .shutdown = dummy, /* never called */ .disable = dummy, .enable = dummy, @@ -160,7 +163,7 @@ void __init init_IRQ(void) irq_desc[i].status = IRQ_DISABLED; irq_desc[i].action = NULL; irq_desc[i].depth = 1; - irq_desc[i].handler = &SIGIO_irq_type; + irq_desc[i].handler = &normal_irq_type; enable_irq(i); } } diff --git a/arch/um/kernel/irq_user.c b/arch/um/kernel/irq_user.c index 6d6f9484b88..c3ccaf24f3e 100644 --- a/arch/um/kernel/irq_user.c +++ b/arch/um/kernel/irq_user.c @@ -85,8 +85,6 @@ void sigio_handler(int sig, union uml_pt_regs *regs) next = irq_fd->next; if(irq_fd->freed){ free_irq(irq_fd->irq, irq_fd->id); - free_irq_by_irq_and_dev(irq_fd->irq, - irq_fd->id); } } } @@ -236,9 +234,15 @@ static void free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg) (*prev)->fd, pollfds[i].fd); goto out; } - memcpy(&pollfds[i], &pollfds[i + 1], - (pollfds_num - i - 1) * sizeof(pollfds[0])); + pollfds_num--; + + /* This moves the *whole* array after pollfds[i] (though + * it doesn't spot as such)! */ + + memmove(&pollfds[i], &pollfds[i + 1], + (pollfds_num - i) * sizeof(pollfds[0])); + if(last_irq_ptr == &old_fd->next) last_irq_ptr = prev; *prev = (*prev)->next; diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c index 78d69dc74b2..99439fa15ef 100644 --- a/arch/um/kernel/ksyms.c +++ b/arch/um/kernel/ksyms.c @@ -57,6 +57,7 @@ EXPORT_SYMBOL(copy_to_user_tt); EXPORT_SYMBOL(strncpy_from_user_skas); EXPORT_SYMBOL(copy_to_user_skas); EXPORT_SYMBOL(copy_from_user_skas); +EXPORT_SYMBOL(clear_user_skas); #endif EXPORT_SYMBOL(uml_strdup); diff --git a/arch/um/kernel/main.c b/arch/um/kernel/main.c index a17c49703f9..e59f5815267 100644 --- a/arch/um/kernel/main.c +++ b/arch/um/kernel/main.c @@ -24,8 +24,6 @@ #include "mode.h" #include "choose-mode.h" #include "uml-config.h" -#include "irq_user.h" -#include "time_user.h" #include "os.h" /* Set in set_stklim, which is called from main and __wrap_malloc. @@ -71,7 +69,7 @@ static __init void do_uml_initcalls(void) static void last_ditch_exit(int sig) { - CHOOSE_MODE(kmalloc_ok = 0, (void) 0); + kmalloc_ok = 0; signal(SIGINT, SIG_DFL); signal(SIGTERM, SIG_DFL); signal(SIGHUP, SIG_DFL); @@ -87,7 +85,7 @@ int main(int argc, char **argv, char **envp) { char **new_argv; sigset_t mask; - int ret, i; + int ret, i, err; /* Enable all signals except SIGIO - in some environments, we can * enter with some signals blocked @@ -160,27 +158,29 @@ int main(int argc, char **argv, char **envp) */ change_sig(SIGPROF, 0); - /* Reboot */ - if(ret){ - int err; + /* This signal stuff used to be in the reboot case. However, + * sometimes a SIGVTALRM can come in when we're halting (reproducably + * when writing out gcov information, presumably because that takes + * some time) and cause a segfault. + */ - printf("\n"); + /* stop timers and set SIG*ALRM to be ignored */ + disable_timer(); - /* stop timers and set SIG*ALRM to be ignored */ - disable_timer(); + /* disable SIGIO for the fds and set SIGIO to be ignored */ + err = deactivate_all_fds(); + if(err) + printf("deactivate_all_fds failed, errno = %d\n", -err); - /* disable SIGIO for the fds and set SIGIO to be ignored */ - err = deactivate_all_fds(); - if(err) - printf("deactivate_all_fds failed, errno = %d\n", - -err); - - /* Let any pending signals fire now. This ensures - * that they won't be delivered after the exec, when - * they are definitely not expected. - */ - unblock_signals(); + /* Let any pending signals fire now. This ensures + * that they won't be delivered after the exec, when + * they are definitely not expected. + */ + unblock_signals(); + /* Reboot */ + if(ret){ + printf("\n"); execvp(new_argv[0], new_argv); perror("Failed to exec kernel"); ret = 1; diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c index f156661781c..5597bd39e6b 100644 --- a/arch/um/kernel/mem.c +++ b/arch/um/kernel/mem.c @@ -53,7 +53,6 @@ static void setup_highmem(unsigned long highmem_start, for(i = 0; i < highmem_len >> PAGE_SHIFT; i++){ page = &mem_map[highmem_pfn + i]; ClearPageReserved(page); - set_bit(PG_highmem, &page->flags); set_page_count(page, 1); __free_page(page); } @@ -100,12 +99,37 @@ void mem_init(void) #endif } +/* + * Create a page table and place a pointer to it in a middle page + * directory entry. + */ +static void __init one_page_table_init(pmd_t *pmd) +{ + if (pmd_none(*pmd)) { + pte_t *pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE); + set_pmd(pmd, __pmd(_KERNPG_TABLE + + (unsigned long) __pa(pte))); + if (pte != pte_offset_kernel(pmd, 0)) + BUG(); + } +} + +static void __init one_md_table_init(pud_t *pud) +{ +#ifdef CONFIG_3_LEVEL_PGTABLES + pmd_t *pmd_table = (pmd_t *) alloc_bootmem_low_pages(PAGE_SIZE); + set_pud(pud, __pud(_KERNPG_TABLE + (unsigned long) __pa(pmd_table))); + if (pmd_table != pmd_offset(pud, 0)) + BUG(); +#endif +} + static void __init fixrange_init(unsigned long start, unsigned long end, pgd_t *pgd_base) { pgd_t *pgd; + pud_t *pud; pmd_t *pmd; - pte_t *pte; int i, j; unsigned long vaddr; @@ -115,15 +139,12 @@ static void __init fixrange_init(unsigned long start, unsigned long end, pgd = pgd_base + i; for ( ; (i < PTRS_PER_PGD) && (vaddr < end); pgd++, i++) { - pmd = (pmd_t *)pgd; + pud = pud_offset(pgd, vaddr); + if (pud_none(*pud)) + one_md_table_init(pud); + pmd = pmd_offset(pud, vaddr); for (; (j < PTRS_PER_PMD) && (vaddr != end); pmd++, j++) { - if (pmd_none(*pmd)) { - pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE); - set_pmd(pmd, __pmd(_KERNPG_TABLE + - (unsigned long) __pa(pte))); - if (pte != pte_offset_kernel(pmd, 0)) - BUG(); - } + one_page_table_init(pmd); vaddr += PMD_SIZE; } j = 0; diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c index 51f8e5a8ac6..1b5ef3e96c7 100644 --- a/arch/um/kernel/process.c +++ b/arch/um/kernel/process.c @@ -30,7 +30,6 @@ #include "init.h" #include "os.h" #include "uml-config.h" -#include "ptrace_user.h" #include "choose-mode.h" #include "mode.h" #ifdef UML_CONFIG_MODE_SKAS @@ -131,7 +130,7 @@ int start_fork_tramp(void *thread_arg, unsigned long temp_stack, return(arg.pid); } -static int ptrace_child(void *arg) +static int ptrace_child(void) { int ret; int pid = os_getpid(), ppid = getppid(); @@ -160,20 +159,16 @@ static int ptrace_child(void *arg) _exit(ret); } -static int start_ptraced_child(void **stack_out) +static int start_ptraced_child(void) { - void *stack; - unsigned long sp; int pid, n, status; - stack = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC, - MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); - if(stack == MAP_FAILED) - panic("check_ptrace : mmap failed, errno = %d", errno); - sp = (unsigned long) stack + PAGE_SIZE - sizeof(void *); - pid = clone(ptrace_child, (void *) sp, SIGCHLD, NULL); + pid = fork(); + if(pid == 0) + ptrace_child(); + if(pid < 0) - panic("check_ptrace : clone failed, errno = %d", errno); + panic("check_ptrace : fork failed, errno = %d", errno); CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED)); if(n < 0) panic("check_ptrace : wait failed, errno = %d", errno); @@ -181,7 +176,6 @@ static int start_ptraced_child(void **stack_out) panic("check_ptrace : expected SIGSTOP, got status = %d", status); - *stack_out = stack; return(pid); } @@ -189,12 +183,12 @@ static int start_ptraced_child(void **stack_out) * just avoid using sysemu, not panic, but only if SYSEMU features are broken. * So only for SYSEMU features we test mustpanic, while normal host features * must work anyway!*/ -static int stop_ptraced_child(int pid, void *stack, int exitcode, int mustpanic) +static int stop_ptraced_child(int pid, int exitcode, int mustexit) { int status, n, ret = 0; if(ptrace(PTRACE_CONT, pid, 0, 0) < 0) - panic("check_ptrace : ptrace failed, errno = %d", errno); + panic("stop_ptraced_child : ptrace failed, errno = %d", errno); CATCH_EINTR(n = waitpid(pid, &status, 0)); if(!WIFEXITED(status) || (WEXITSTATUS(status) != exitcode)) { int exit_with = WEXITSTATUS(status); @@ -205,15 +199,13 @@ static int stop_ptraced_child(int pid, void *stack, int exitcode, int mustpanic) printk("check_ptrace : child exited with exitcode %d, while " "expecting %d; status 0x%x", exit_with, exitcode, status); - if (mustpanic) + if (mustexit) panic("\n"); else printk("\n"); ret = -1; } - if(munmap(stack, PAGE_SIZE) < 0) - panic("check_ptrace : munmap failed, errno = %d", errno); return ret; } @@ -235,12 +227,11 @@ __uml_setup("nosysemu", nosysemu_cmd_param, static void __init check_sysemu(void) { - void *stack; int pid, syscall, n, status, count=0; printk("Checking syscall emulation patch for ptrace..."); sysemu_supported = 0; - pid = start_ptraced_child(&stack); + pid = start_ptraced_child(); if(ptrace(PTRACE_SYSEMU, pid, 0, 0) < 0) goto fail; @@ -258,7 +249,7 @@ static void __init check_sysemu(void) panic("check_sysemu : failed to modify system " "call return, errno = %d", errno); - if (stop_ptraced_child(pid, stack, 0, 0) < 0) + if (stop_ptraced_child(pid, 0, 0) < 0) goto fail_stopped; sysemu_supported = 1; @@ -266,7 +257,7 @@ static void __init check_sysemu(void) set_using_sysemu(!force_sysemu_disabled); printk("Checking advanced syscall emulation patch for ptrace..."); - pid = start_ptraced_child(&stack); + pid = start_ptraced_child(); while(1){ count++; if(ptrace(PTRACE_SYSEMU_SINGLESTEP, pid, 0, 0) < 0) @@ -291,7 +282,7 @@ static void __init check_sysemu(void) break; } } - if (stop_ptraced_child(pid, stack, 0, 0) < 0) + if (stop_ptraced_child(pid, 0, 0) < 0) goto fail_stopped; sysemu_supported = 2; @@ -302,18 +293,17 @@ static void __init check_sysemu(void) return; fail: - stop_ptraced_child(pid, stack, 1, 0); + stop_ptraced_child(pid, 1, 0); fail_stopped: printk("missing\n"); } void __init check_ptrace(void) { - void *stack; int pid, syscall, n, status; printk("Checking that ptrace can change system call numbers..."); - pid = start_ptraced_child(&stack); + pid = start_ptraced_child(); if (ptrace(PTRACE_OLDSETOPTIONS, pid, 0, (void *)PTRACE_O_TRACESYSGOOD) < 0) panic("check_ptrace: PTRACE_SETOPTIONS failed, errno = %d", errno); @@ -340,7 +330,7 @@ void __init check_ptrace(void) break; } } - stop_ptraced_child(pid, stack, 0, 1); + stop_ptraced_child(pid, 0, 1); printk("OK\n"); check_sysemu(); } @@ -372,11 +362,10 @@ void forward_pending_sigio(int target) static inline int check_skas3_ptrace_support(void) { struct ptrace_faultinfo fi; - void *stack; int pid, n, ret = 1; printf("Checking for the skas3 patch in the host..."); - pid = start_ptraced_child(&stack); + pid = start_ptraced_child(); n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi); if (n < 0) { @@ -391,7 +380,7 @@ static inline int check_skas3_ptrace_support(void) } init_registers(pid); - stop_ptraced_child(pid, stack, 1, 1); + stop_ptraced_child(pid, 1, 1); return(ret); } diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process_kern.c index c1adf7ba3fd..804c6bbdf67 100644 --- a/arch/um/kernel/process_kern.c +++ b/arch/um/kernel/process_kern.c @@ -43,7 +43,6 @@ #include "tlb.h" #include "frame_kern.h" #include "sigcontext.h" -#include "2_5compat.h" #include "os.h" #include "mode.h" #include "mode_kern.h" @@ -55,18 +54,6 @@ */ struct cpu_task cpu_tasks[NR_CPUS] = { [0 ... NR_CPUS - 1] = { -1, NULL } }; -struct task_struct *get_task(int pid, int require) -{ - struct task_struct *ret; - - read_lock(&tasklist_lock); - ret = find_task_by_pid(pid); - read_unlock(&tasklist_lock); - - if(require && (ret == NULL)) panic("get_task couldn't find a task\n"); - return(ret); -} - int external_pid(void *t) { struct task_struct *task = t ? t : current; @@ -189,7 +176,6 @@ void default_idle(void) while(1){ /* endless idle loop with no priority at all */ - SET_PRI(current); /* * although we are an idle CPU, we do not want to @@ -212,11 +198,6 @@ int page_size(void) return(PAGE_SIZE); } -unsigned long page_mask(void) -{ - return(PAGE_MASK); -} - void *um_virt_to_phys(struct task_struct *task, unsigned long addr, pte_t *pte_out) { @@ -349,11 +330,6 @@ char *uml_strdup(char *string) return(new); } -void *get_init_task(void) -{ - return(&init_thread_union.thread_info.task); -} - int copy_to_user_proc(void __user *to, void *from, int size) { return(copy_to_user(to, from, size)); @@ -480,15 +456,3 @@ unsigned long arch_align_stack(unsigned long sp) return sp & ~0xf; } #endif - - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c index 2b75d8d9ba7..71af4d50389 100644 --- a/arch/um/kernel/ptrace.c +++ b/arch/um/kernel/ptrace.c @@ -28,9 +28,9 @@ static inline void set_singlestepping(struct task_struct *child, int on) child->thread.singlestep_syscall = 0; #ifdef SUBARCH_SET_SINGLESTEPPING - SUBARCH_SET_SINGLESTEPPING(child, on) + SUBARCH_SET_SINGLESTEPPING(child, on); #endif - } +} /* * Called by kernel/ptrace.c when detaching.. @@ -83,7 +83,7 @@ long sys_ptrace(long request, long pid, long addr, long data) } #ifdef SUBACH_PTRACE_SPECIAL - SUBARCH_PTRACE_SPECIAL(child,request,addr,data) + SUBARCH_PTRACE_SPECIAL(child,request,addr,data); #endif ret = ptrace_check_attach(child, request == PTRACE_KILL); @@ -322,11 +322,9 @@ void syscall_trace(union uml_pt_regs *regs, int entryexit) UPT_SYSCALL_ARG2(regs), UPT_SYSCALL_ARG3(regs), UPT_SYSCALL_ARG4(regs)); - else { - int res = UPT_SYSCALL_RET(regs); - audit_syscall_exit(current, AUDITSC_RESULT(res), - res); - } + else audit_syscall_exit(current, + AUDITSC_RESULT(UPT_SYSCALL_RET(regs)), + UPT_SYSCALL_RET(regs)); } /* Fake a debug trap */ @@ -356,14 +354,3 @@ void syscall_trace(union uml_pt_regs *regs, int entryexit) current->exit_code = 0; } } - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/skas/process_kern.c b/arch/um/kernel/skas/process_kern.c index ab5d3271da0..fc71ef29578 100644 --- a/arch/um/kernel/skas/process_kern.c +++ b/arch/um/kernel/skas/process_kern.c @@ -68,8 +68,11 @@ void new_thread_handler(int sig) * 0 if it just exits */ n = run_kernel_thread(fn, arg, ¤t->thread.exec_buf); - if(n == 1) + if(n == 1){ + /* Handle any immediate reschedules or signals */ + interrupt_end(); userspace(¤t->thread.regs.regs); + } else do_exit(0); } @@ -96,6 +99,8 @@ void fork_handler(int sig) schedule_tail(current->thread.prev_sched); current->thread.prev_sched = NULL; + /* Handle any immediate reschedules or signals */ + interrupt_end(); userspace(¤t->thread.regs.regs); } diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c index e630438f9e7..f80850091e7 100644 --- a/arch/um/kernel/sysrq.c +++ b/arch/um/kernel/sysrq.c @@ -3,6 +3,7 @@ * Licensed under the GPL */ +#include "linux/config.h" #include "linux/sched.h" #include "linux/kernel.h" #include "linux/module.h" @@ -12,14 +13,14 @@ #include "sysrq.h" #include "user_util.h" -void show_trace(unsigned long * stack) +/* Catch non-i386 SUBARCH's. */ +#if !defined(CONFIG_UML_X86) || defined(CONFIG_64BIT) +void show_trace(struct task_struct *task, unsigned long * stack) { - /* XXX: Copy the CONFIG_FRAME_POINTER stack-walking backtrace from - * arch/i386/kernel/traps.c, and then move this to sys-i386/sysrq.c.*/ unsigned long addr; if (!stack) { - stack = (unsigned long*) &stack; + stack = (unsigned long*) &stack; WARN_ON(1); } @@ -35,6 +36,7 @@ void show_trace(unsigned long * stack) } printk("\n"); } +#endif /* * stack dumps generator - this is used by arch-independent code. @@ -44,7 +46,7 @@ void dump_stack(void) { unsigned long stack; - show_trace(&stack); + show_trace(current, &stack); } EXPORT_SYMBOL(dump_stack); @@ -59,7 +61,11 @@ void show_stack(struct task_struct *task, unsigned long *esp) int i; if (esp == NULL) { - if (task != current) { + if (task != current && task != NULL) { + /* XXX: Isn't this bogus? I.e. isn't this the + * *userspace* stack of this task? If not so, use this + * even when task == current (as in i386). + */ esp = (unsigned long *) KSTK_ESP(task); /* Which one? No actual difference - just coding style.*/ //esp = (unsigned long *) PT_REGS_IP(&task->thread.regs); @@ -77,5 +83,6 @@ void show_stack(struct task_struct *task, unsigned long *esp) printk("%08lx ", *stack++); } - show_trace(esp); + printk("Call Trace: \n"); + show_trace(current, esp); } diff --git a/arch/um/kernel/trap_kern.c b/arch/um/kernel/trap_kern.c index 5fca2c61eb9..c20aef12059 100644 --- a/arch/um/kernel/trap_kern.c +++ b/arch/um/kernel/trap_kern.c @@ -23,7 +23,6 @@ #include "kern.h" #include "chan_kern.h" #include "mconsole_kern.h" -#include "2_5compat.h" #include "mem.h" #include "mem_kern.h" @@ -57,10 +56,11 @@ int handle_page_fault(unsigned long address, unsigned long ip, *code_out = SEGV_ACCERR; if(is_write && !(vma->vm_flags & VM_WRITE)) goto out; + + if(!(vma->vm_flags & (VM_READ | VM_EXEC))) + goto out; + page = address & PAGE_MASK; - pgd = pgd_offset(mm, page); - pud = pud_offset(pgd, page); - pmd = pmd_offset(pud, page); do { survive: switch (handle_mm_fault(mm, vma, address, is_write)){ @@ -106,33 +106,6 @@ out_of_memory: goto out; } -LIST_HEAD(physmem_remappers); - -void register_remapper(struct remapper *info) -{ - list_add(&info->list, &physmem_remappers); -} - -static int check_remapped_addr(unsigned long address, int is_write) -{ - struct remapper *remapper; - struct list_head *ele; - __u64 offset; - int fd; - - fd = phys_mapping(__pa(address), &offset); - if(fd == -1) - return(0); - - list_for_each(ele, &physmem_remappers){ - remapper = list_entry(ele, struct remapper, list); - if((*remapper->proc)(fd, address, is_write, offset)) - return(1); - } - - return(0); -} - /* * We give a *copy* of the faultinfo in the regs to segv. * This must be done, since nesting SEGVs could overwrite @@ -151,8 +124,6 @@ unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, void *sc) flush_tlb_kernel_vm(); return(0); } - else if(check_remapped_addr(address & PAGE_MASK, is_write)) - return(0); else if(current->mm == NULL) panic("Segfault with no mm"); err = handle_page_fault(address, ip, is_write, is_user, &si.si_code); diff --git a/arch/um/kernel/tt/Makefile b/arch/um/kernel/tt/Makefile index c3faea21a99..3fd2554e60b 100644 --- a/arch/um/kernel/tt/Makefile +++ b/arch/um/kernel/tt/Makefile @@ -3,10 +3,6 @@ # Licensed under the GPL # -extra-y := unmap_fin.o -targets := unmap.o -clean-files := unmap_tmp.o - obj-y = exec_kern.o exec_user.o gdb.o ksyms.o mem.o mem_user.o process_kern.o \ syscall_kern.o syscall_user.o time.o tlb.o tracer.o trap_user.o \ uaccess.o uaccess_user.o @@ -16,14 +12,3 @@ obj-$(CONFIG_PT_PROXY) += gdb_kern.o ptproxy/ USER_OBJS := gdb.o time.o tracer.o include arch/um/scripts/Makefile.rules - -UNMAP_CFLAGS := $(patsubst -pg -DPROFILING,,$(USER_CFLAGS)) -UNMAP_CFLAGS := $(patsubst -fprofile-arcs -ftest-coverage,,$(UNMAP_CFLAGS)) - -#XXX: partially copied from arch/um/scripts/Makefile.rules -$(obj)/unmap.o: c_flags = -Wp,-MD,$(depfile) $(UNMAP_CFLAGS) - -$(obj)/unmap_fin.o : $(obj)/unmap.o - $(LD) -r -o $(obj)/unmap_tmp.o $< $(shell $(CC) -print-file-name=libc.a) - $(OBJCOPY) $(obj)/unmap_tmp.o $@ -G switcheroo - diff --git a/arch/um/kernel/tt/ksyms.c b/arch/um/kernel/tt/ksyms.c index 92ec85d67c7..84a9385a8fe 100644 --- a/arch/um/kernel/tt/ksyms.c +++ b/arch/um/kernel/tt/ksyms.c @@ -12,6 +12,7 @@ EXPORT_SYMBOL(__do_copy_to_user); EXPORT_SYMBOL(__do_strncpy_from_user); EXPORT_SYMBOL(__do_strnlen_user); EXPORT_SYMBOL(__do_clear_user); +EXPORT_SYMBOL(clear_user_tt); EXPORT_SYMBOL(tracing_pid); EXPORT_SYMBOL(honeypot); diff --git a/arch/um/kernel/tt/process_kern.c b/arch/um/kernel/tt/process_kern.c index df810ca8fc1..776310fd5b8 100644 --- a/arch/um/kernel/tt/process_kern.c +++ b/arch/um/kernel/tt/process_kern.c @@ -32,10 +32,6 @@ void *switch_to_tt(void *prev, void *next, void *last) unsigned long flags; int err, vtalrm, alrm, prof, cpu; char c; - /* jailing and SMP are incompatible, so this doesn't need to be - * made per-cpu - */ - static int reading; from = prev; to = next; @@ -59,13 +55,11 @@ void *switch_to_tt(void *prev, void *next, void *last) c = 0; set_current(to); - reading = 0; err = os_write_file(to->thread.mode.tt.switch_pipe[1], &c, sizeof(c)); if(err != sizeof(c)) panic("write of switch_pipe failed, err = %d", -err); - reading = 1; - if(from->thread.mode.tt.switch_pipe[0] == -1) + if(from->thread.mode.tt.switch_pipe[0] == -1) os_kill_process(os_getpid(), 0); err = os_read_file(from->thread.mode.tt.switch_pipe[0], &c, sizeof(c)); diff --git a/arch/um/kernel/tt/unmap.c b/arch/um/kernel/tt/unmap.c deleted file mode 100644 index 3f7aecdbe53..00000000000 --- a/arch/um/kernel/tt/unmap.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright (C) 2000 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include <sys/mman.h> - -int switcheroo(int fd, int prot, void *from, void *to, int size) -{ - if(munmap(to, size) < 0){ - return(-1); - } - if(mmap(to, size, prot, MAP_SHARED | MAP_FIXED, fd, 0) != to){ - return(-1); - } - if(munmap(from, size) < 0){ - return(-1); - } - return(0); -} - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 4d10ec372a6..8736d098f0e 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -26,7 +26,6 @@ #include "asm/setup.h" #include "ubd_user.h" #include "asm/current.h" -#include "asm/setup.h" #include "user_util.h" #include "kern_util.h" #include "kern.h" @@ -111,12 +110,6 @@ struct seq_operations cpuinfo_op = { .show = show_cpuinfo, }; -pte_t * __bad_pagetable(void) -{ - panic("Someone should implement __bad_pagetable"); - return(NULL); -} - /* Set in linux_main */ unsigned long host_task_size; unsigned long task_size; diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S index 76eadb30918..61dfd4fef75 100644 --- a/arch/um/kernel/uml.lds.S +++ b/arch/um/kernel/uml.lds.S @@ -14,19 +14,10 @@ SECTIONS /* Used in arch/um/kernel/mem.c. Any memory between START and __binary_start * is remapped.*/ __binary_start = .; -#ifdef MODE_TT - .thread_private : { - __start_thread_private = .; - errno = .; - . += 4; - arch/um/kernel/tt/unmap_fin.o (.data) - __end_thread_private = .; - } - . = ALIGN(4096); - .remap : { arch/um/kernel/tt/unmap_fin.o (.text) } - /* We want it only if we are in MODE_TT. In both cases, however, when MODE_TT - * is off the resulting binary segfaults.*/ +#ifdef MODE_TT + .remap_data : { arch/um/sys-SUBARCH/unmap_fin.o (.data .bss) } + .remap : { arch/um/sys-SUBARCH/unmap_fin.o (.text) } . = ALIGN(4096); /* Init code and data */ #endif @@ -73,6 +64,8 @@ SECTIONS .got : { *(.got.plt) *(.got) } .dynamic : { *(.dynamic) } + .tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) } + .tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) } /* We want the small data sections together, so single-instruction offsets can access them all, and initialized data all before uninitialized, so we can shorten the on-disk segment size. */ diff --git a/arch/um/os-Linux/elf_aux.c b/arch/um/os-Linux/elf_aux.c index 9aee0b62ebc..f0d6060e3e5 100644 --- a/arch/um/os-Linux/elf_aux.c +++ b/arch/um/os-Linux/elf_aux.c @@ -45,7 +45,11 @@ __init void scan_elf_aux( char **envp) elf_aux_hwcap = auxv->a_un.a_val; break; case AT_PLATFORM: - elf_aux_platform = auxv->a_un.a_ptr; + /* elf.h removed the pointer elements from + * a_un, so we have to use a_val, which is + * all that's left. + */ + elf_aux_platform = (char *) auxv->a_un.a_val; break; case AT_PAGESZ: page_size = auxv->a_un.a_val; diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c index 77d4066d1af..fd45bb26090 100644 --- a/arch/um/os-Linux/file.c +++ b/arch/um/os-Linux/file.c @@ -363,7 +363,7 @@ int os_write_file(int fd, const void *buf, int len) (int (*)(int, void *, int)) write, copy_to_user_proc)); } -int os_file_size(char *file, long long *size_out) +int os_file_size(char *file, unsigned long long *size_out) { struct uml_stat buf; int err; diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules index 0b2491883d9..7459d09c233 100644 --- a/arch/um/scripts/Makefile.rules +++ b/arch/um/scripts/Makefile.rules @@ -10,11 +10,17 @@ USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file)) $(USER_OBJS) : c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) \ $(CFLAGS_$(notdir $@)) +# The stubs and unmap.o can't try to call mcount or update basic block data +define unprofile + $(patsubst -pg,,$(patsubst -fprofile-arcs -ftest-coverage,,$(1))) +endef + + quiet_cmd_make_link = SYMLINK $@ cmd_make_link = ln -sf $(srctree)/arch/$(SUBARCH)/$($(notdir $@)-dir)/$(notdir $@) $@ # this needs to be before the foreach, because targets does not accept -# complete paths like $(obj)/$(f). To make sure this works, use a := assignment, +# complete paths like $(obj)/$(f). To make sure this works, use a := assignment # or we will get $(obj)/$(f) in the "targets" value. # Also, this forces you to use the := syntax when assigning to targets. # Otherwise the line below will cause an infinite loop (if you don't know why, diff --git a/arch/um/scripts/Makefile.unmap b/arch/um/scripts/Makefile.unmap new file mode 100644 index 00000000000..37a8f976529 --- /dev/null +++ b/arch/um/scripts/Makefile.unmap @@ -0,0 +1,22 @@ +clean-files += unmap_tmp.o unmap_fin.o unmap.o + +ifdef CONFIG_MODE_TT + +#Always build unmap_fin.o +extra-y += unmap_fin.o +#Do dependency tracking for unmap.o (it will be always built, but won't get the tracking unless we use this). +targets += unmap.o + +#XXX: partially copied from arch/um/scripts/Makefile.rules +$(obj)/unmap.o: _c_flags = $(call unprofile,$(CFLAGS)) + +quiet_cmd_wrapld = LD $@ +define cmd_wrapld + $(LD) -r -o $(obj)/unmap_tmp.o $< $(shell $(CC) -print-file-name=libc.a); \ + $(OBJCOPY) $(obj)/unmap_tmp.o $@ -G switcheroo +endef + +$(obj)/unmap_fin.o : $(obj)/unmap.o FORCE + $(call if_changed,wrapld) + +endif diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile index fcd67c3414e..095bcdb0b9c 100644 --- a/arch/um/sys-i386/Makefile +++ b/arch/um/sys-i386/Makefile @@ -9,6 +9,8 @@ USER_OBJS := bugs.o ptrace_user.o sigcontext.o fault.o SYMLINKS = bitops.c semaphore.c highmem.c module.c +include arch/um/scripts/Makefile.rules + bitops.c-dir = lib semaphore.c-dir = kernel highmem.c-dir = mm @@ -16,4 +18,4 @@ module.c-dir = kernel subdir- := util -include arch/um/scripts/Makefile.rules +include arch/um/scripts/Makefile.unmap diff --git a/arch/um/sys-i386/delay.c b/arch/um/sys-i386/delay.c index e9892eef51c..2c11b9770e8 100644 --- a/arch/um/sys-i386/delay.c +++ b/arch/um/sys-i386/delay.c @@ -1,5 +1,7 @@ -#include "linux/delay.h" -#include "asm/param.h" +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <asm/param.h> void __delay(unsigned long time) { @@ -20,13 +22,19 @@ void __udelay(unsigned long usecs) int i, n; n = (loops_per_jiffy * HZ * usecs) / MILLION; - for(i=0;i<n;i++) ; + for(i=0;i<n;i++) + cpu_relax(); } +EXPORT_SYMBOL(__udelay); + void __const_udelay(unsigned long usecs) { int i, n; n = (loops_per_jiffy * HZ * usecs) / MILLION; - for(i=0;i<n;i++) ; + for(i=0;i<n;i++) + cpu_relax(); } + +EXPORT_SYMBOL(__const_udelay); diff --git a/arch/um/sys-i386/sysrq.c b/arch/um/sys-i386/sysrq.c index 281fc7b8ca0..e3706d15c4f 100644 --- a/arch/um/sys-i386/sysrq.c +++ b/arch/um/sys-i386/sysrq.c @@ -3,12 +3,15 @@ * Licensed under the GPL */ +#include "linux/config.h" #include "linux/kernel.h" #include "linux/smp.h" #include "linux/sched.h" +#include "linux/kallsyms.h" #include "asm/ptrace.h" #include "sysrq.h" +/* This is declared by <linux/sched.h> */ void show_regs(struct pt_regs *regs) { printk("\n"); @@ -31,5 +34,80 @@ void show_regs(struct pt_regs *regs) 0xffff & PT_REGS_DS(regs), 0xffff & PT_REGS_ES(regs)); - show_trace((unsigned long *) ®s); + show_trace(NULL, (unsigned long *) ®s); } + +/* Copied from i386. */ +static inline int valid_stack_ptr(struct thread_info *tinfo, void *p) +{ + return p > (void *)tinfo && + p < (void *)tinfo + THREAD_SIZE - 3; +} + +/* Adapted from i386 (we also print the address we read from). */ +static inline unsigned long print_context_stack(struct thread_info *tinfo, + unsigned long *stack, unsigned long ebp) +{ + unsigned long addr; + +#ifdef CONFIG_FRAME_POINTER + while (valid_stack_ptr(tinfo, (void *)ebp)) { + addr = *(unsigned long *)(ebp + 4); + printk("%08lx: [<%08lx>]", ebp + 4, addr); + print_symbol(" %s", addr); + printk("\n"); + ebp = *(unsigned long *)ebp; + } +#else + while (valid_stack_ptr(tinfo, stack)) { + addr = *stack; + if (__kernel_text_address(addr)) { + printk("%08lx: [<%08lx>]", (unsigned long) stack, addr); + print_symbol(" %s", addr); + printk("\n"); + } + stack++; + } +#endif + return ebp; +} + +void show_trace(struct task_struct* task, unsigned long * stack) +{ + unsigned long ebp; + struct thread_info *context; + + /* Turn this into BUG_ON if possible. */ + if (!stack) { + stack = (unsigned long*) &stack; + printk("show_trace: got NULL stack, implicit assumption task == current"); + WARN_ON(1); + } + + if (!task) + task = current; + + if (task != current) { + //ebp = (unsigned long) KSTK_EBP(task); + /* Which one? No actual difference - just coding style.*/ + ebp = (unsigned long) PT_REGS_EBP(&task->thread.regs); + } else { + asm ("movl %%ebp, %0" : "=r" (ebp) : ); + } + + context = (struct thread_info *) + ((unsigned long)stack & (~(THREAD_SIZE - 1))); + print_context_stack(context, stack, ebp); + + /*while (((long) stack & (THREAD_SIZE-1)) != 0) { + addr = *stack; + if (__kernel_text_address(addr)) { + printk("%08lx: [<%08lx>]", (unsigned long) stack, addr); + print_symbol(" %s", addr); + printk("\n"); + } + stack++; + }*/ + printk("\n"); +} + diff --git a/arch/um/sys-i386/unmap.c b/arch/um/sys-i386/unmap.c new file mode 100644 index 00000000000..136875263d2 --- /dev/null +++ b/arch/um/sys-i386/unmap.c @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2000 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include <linux/mman.h> +#include <asm/unistd.h> + +static int errno; + +static inline _syscall2(int,munmap,void *,start,size_t,len) +static inline _syscall6(void *,mmap2,void *,addr,size_t,len,int,prot,int,flags,int,fd,off_t,offset) +int switcheroo(int fd, int prot, void *from, void *to, int size) +{ + if(munmap(to, size) < 0){ + return(-1); + } + if(mmap2(to, size, prot, MAP_SHARED | MAP_FIXED, fd, 0) != to){ + return(-1); + } + if(munmap(from, size) < 0){ + return(-1); + } + return(0); +} diff --git a/arch/um/sys-ppc/sysrq.c b/arch/um/sys-ppc/sysrq.c index 82d6e9335bb..2f816f1a0ff 100644 --- a/arch/um/sys-ppc/sysrq.c +++ b/arch/um/sys-ppc/sysrq.c @@ -27,17 +27,5 @@ void show_regs(struct pt_regs_subarch *regs) 0xffff & regs->xds, 0xffff & regs->xes); #endif - show_trace(®s->gpr[1]); + show_trace(current, ®s->gpr[1]); } - - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile index 3d7da911cc8..2bc6f684901 100644 --- a/arch/um/sys-x86_64/Makefile +++ b/arch/um/sys-x86_64/Makefile @@ -14,11 +14,11 @@ obj-$(CONFIG_MODULES) += module.o um_module.o USER_OBJS := ptrace_user.o sigcontext.o -include arch/um/scripts/Makefile.rules - SYMLINKS = bitops.c csum-copy.S csum-partial.c csum-wrappers.c memcpy.S \ semaphore.c thunk.S module.c +include arch/um/scripts/Makefile.rules + bitops.c-dir = lib csum-copy.S-dir = lib csum-partial.c-dir = lib @@ -28,6 +28,6 @@ semaphore.c-dir = kernel thunk.S-dir = lib module.c-dir = kernel -CFLAGS_csum-partial.o := -Dcsum_partial=arch_csum_partial - subdir- := util + +include arch/um/scripts/Makefile.unmap diff --git a/arch/um/sys-x86_64/delay.c b/arch/um/sys-x86_64/delay.c index 651332aeec2..137f4446b43 100644 --- a/arch/um/sys-x86_64/delay.c +++ b/arch/um/sys-x86_64/delay.c @@ -5,40 +5,37 @@ * Licensed under the GPL */ -#include "linux/delay.h" -#include "asm/processor.h" -#include "asm/param.h" +#include <linux/module.h> +#include <linux/delay.h> +#include <asm/processor.h> +#include <asm/param.h> void __delay(unsigned long loops) { unsigned long i; - for(i = 0; i < loops; i++) ; + for(i = 0; i < loops; i++) + cpu_relax(); } void __udelay(unsigned long usecs) { - int i, n; + unsigned long i, n; n = (loops_per_jiffy * HZ * usecs) / MILLION; - for(i=0;i<n;i++) ; + for(i=0;i<n;i++) + cpu_relax(); } +EXPORT_SYMBOL(__udelay); + void __const_udelay(unsigned long usecs) { - int i, n; + unsigned long i, n; n = (loops_per_jiffy * HZ * usecs) / MILLION; - for(i=0;i<n;i++) ; + for(i=0;i<n;i++) + cpu_relax(); } -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ +EXPORT_SYMBOL(__const_udelay); diff --git a/arch/um/sys-x86_64/ksyms.c b/arch/um/sys-x86_64/ksyms.c index a27f0ee6a4f..85927380820 100644 --- a/arch/um/sys-x86_64/ksyms.c +++ b/arch/um/sys-x86_64/ksyms.c @@ -16,5 +16,4 @@ EXPORT_SYMBOL(__up_wakeup); EXPORT_SYMBOL(__memcpy); /* Networking helper routines. */ -/*EXPORT_SYMBOL(csum_partial_copy_from); -EXPORT_SYMBOL(csum_partial_copy_to);*/ +EXPORT_SYMBOL(ip_compute_csum); diff --git a/arch/um/sys-x86_64/ptrace.c b/arch/um/sys-x86_64/ptrace.c index b593bb256f2..74eee5c7c6d 100644 --- a/arch/um/sys-x86_64/ptrace.c +++ b/arch/um/sys-x86_64/ptrace.c @@ -5,10 +5,11 @@ */ #define __FRAME_OFFSETS -#include "asm/ptrace.h" -#include "linux/sched.h" -#include "linux/errno.h" -#include "asm/elf.h" +#include <asm/ptrace.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <asm/uaccess.h> +#include <asm/elf.h> /* XXX x86_64 */ unsigned long not_ss; diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/um/sys-x86_64/syscalls.c index dd9914642b8..6f44f40204e 100644 --- a/arch/um/sys-x86_64/syscalls.c +++ b/arch/um/sys-x86_64/syscalls.c @@ -15,6 +15,7 @@ #include "asm/unistd.h" #include "asm/prctl.h" /* XXX This should get the constants from libc */ #include "choose-mode.h" +#include "kern.h" asmlinkage long sys_uname64(struct new_utsname __user * name) { @@ -132,23 +133,27 @@ static long arch_prctl_tt(int code, unsigned long addr) #ifdef CONFIG_MODE_SKAS +/* XXX: Must also call arch_prctl in the host, beside saving the segment bases! */ static long arch_prctl_skas(int code, unsigned long addr) { long ret = 0; switch(code){ - case ARCH_SET_GS: - current->thread.regs.regs.skas.regs[GS_BASE / sizeof(unsigned long)] = addr; - break; case ARCH_SET_FS: current->thread.regs.regs.skas.regs[FS_BASE / sizeof(unsigned long)] = addr; break; + case ARCH_SET_GS: + current->thread.regs.regs.skas.regs[GS_BASE / sizeof(unsigned long)] = addr; + break; case ARCH_GET_FS: - ret = put_user(current->thread.regs.regs.skas.regs[GS / sizeof(unsigned long)], &addr); + ret = put_user(current->thread.regs.regs.skas. + regs[FS_BASE / sizeof(unsigned long)], + (unsigned long __user *)addr); break; case ARCH_GET_GS: - ret = put_user(current->thread.regs.regs.skas.regs[FS / sizeof(unsigned \ -long)], &addr); + ret = put_user(current->thread.regs.regs.skas. + regs[GS_BASE / sizeof(unsigned long)], + (unsigned long __user *)addr); break; default: ret = -EINVAL; diff --git a/arch/um/sys-x86_64/sysrq.c b/arch/um/sys-x86_64/sysrq.c index ddf74691a61..d0a25af19a5 100644 --- a/arch/um/sys-x86_64/sysrq.c +++ b/arch/um/sys-x86_64/sysrq.c @@ -36,14 +36,5 @@ void __show_regs(struct pt_regs * regs) void show_regs(struct pt_regs *regs) { __show_regs(regs); - show_trace((unsigned long *) ®s); + show_trace(current, (unsigned long *) ®s); } - -/* Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/sys-x86_64/unmap.c b/arch/um/sys-x86_64/unmap.c new file mode 100644 index 00000000000..bc7094cce47 --- /dev/null +++ b/arch/um/sys-x86_64/unmap.c @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2000 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include <linux/mman.h> +#include <asm/unistd.h> + +static int errno; + +static inline _syscall2(int,munmap,void *,start,size_t,len) +static inline _syscall6(void *,mmap,void *,addr,size_t,len,int,prot,int,flags,int,fd,off_t,offset) +int switcheroo(int fd, int prot, void *from, void *to, int size) +{ + if(munmap(to, size) < 0){ + return(-1); + } + if(mmap(to, size, prot, MAP_SHARED | MAP_FIXED, fd, 0) != to){ + return(-1); + } + if(munmap(from, size) < 0){ + return(-1); + } + return(0); +} diff --git a/arch/um/sys-x86_64/user-offsets.c b/arch/um/sys-x86_64/user-offsets.c index 5e14792e483..513d17ceafd 100644 --- a/arch/um/sys-x86_64/user-offsets.c +++ b/arch/um/sys-x86_64/user-offsets.c @@ -3,6 +3,14 @@ #include <signal.h> #define __FRAME_OFFSETS #include <asm/ptrace.h> +#include <asm/types.h> +/* For some reason, x86_64 defines u64 and u32 only in <pci/types.h>, which I + * refuse to include here, even though they're used throughout the headers. + * These are used in asm/user.h, and that include can't be avoided because of + * the sizeof(struct user_regs_struct) below. + */ +typedef __u64 u64; +typedef __u32 u32; #include <asm/user.h> #define DEFINE(sym, val) \ diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 44ee7f6acf7..289f448ac89 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -303,6 +303,21 @@ config HPET_TIMER as it is off-chip. You can find the HPET spec at <http://www.intel.com/labs/platcomp/hpet/hpetspec.htm>. +config X86_PM_TIMER + bool "PM timer" + depends on ACPI + default y + help + Support the ACPI PM timer for time keeping. This is slow, + but is useful on some chipsets without HPET on systems with more + than one CPU. On a single processor or single socket multi core + system it is normally not required. + When the PM timer is active 64bit vsyscalls are disabled + and should not be enabled (/proc/sys/kernel/vsyscall64 should + not be changed). + The kernel selects the PM timer only as a last resort, so it is + useful to enable just in case. + config HPET_EMULATE_RTC bool "Provide RTC interrupt" depends on HPET_TIMER && RTC=y @@ -407,7 +422,7 @@ config PCI_DIRECT config PCI_MMCONFIG bool "Support mmconfig PCI config space access" - depends on PCI + depends on PCI && ACPI select ACPI_BOOT config UNORDERED_IO diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index 9ce51dee30b..569595b74c7 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-bk7 -# Sat Mar 12 23:43:44 2005 +# Linux kernel version: 2.6.12-rc4 +# Fri May 13 06:39:11 2005 # CONFIG_X86_64=y CONFIG_64BIT=y @@ -11,8 +11,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_CMPXCHG=y CONFIG_EARLY_PRINTK=y -CONFIG_HPET_TIMER=y -CONFIG_HPET_EMULATE_RTC=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y @@ -22,6 +20,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -33,7 +32,6 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=18 # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y @@ -43,10 +41,11 @@ CONFIG_IKCONFIG_PROC=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 @@ -93,6 +92,9 @@ CONFIG_DISCONTIGMEM=y CONFIG_NUMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_NR_CPUS=8 +CONFIG_HPET_TIMER=y +CONFIG_X86_PM_TIMER=y +CONFIG_HPET_EMULATE_RTC=y CONFIG_GART_IOMMU=y CONFIG_SWIOTLB=y CONFIG_X86_MCE=y @@ -100,6 +102,7 @@ CONFIG_X86_MCE_INTEL=y CONFIG_SECCOMP=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_ISA_DMA_API=y # # Power management options @@ -129,7 +132,7 @@ CONFIG_ACPI_NUMA=y # CONFIG_ACPI_IBM is not set CONFIG_ACPI_TOSHIBA=y CONFIG_ACPI_BLACKLIST_YEAR=2001 -CONFIG_ACPI_DEBUG=y +# CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y @@ -141,6 +144,7 @@ CONFIG_ACPI_SYSTEM=y # CPU Frequency scaling # CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set @@ -150,7 +154,6 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_TABLE=y # # CPUFreq processor drivers @@ -164,6 +167,7 @@ CONFIG_X86_ACPI_CPUFREQ=y # shared options # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y +# CONFIG_X86_SPEEDSTEP_LIB is not set # # Bus options (PCI etc.) @@ -172,9 +176,11 @@ CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_UNORDERED_IO=y +# CONFIG_PCIEPORTBUS is not set CONFIG_PCI_MSI=y # CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_NAMES is not set +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -182,10 +188,6 @@ CONFIG_PCI_MSI=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set @@ -254,7 +256,7 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_AS is not set CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set @@ -308,7 +310,8 @@ CONFIG_BLK_DEV_AMD74XX=y CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set +CONFIG_BLK_DEV_PDC202XX_NEW=y +# CONFIG_PDC202XX_FORCE is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set @@ -353,7 +356,7 @@ CONFIG_BLK_DEV_SD=y # # SCSI low-level drivers # -CONFIG_BLK_DEV_3W_XXXX_RAID=y +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set @@ -384,7 +387,6 @@ CONFIG_SCSI_SATA_VIA=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -392,7 +394,6 @@ CONFIG_SCSI_SATA_VIA=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -401,6 +402,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -437,7 +439,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -502,7 +503,7 @@ CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set +CONFIG_TUN=y # # ARCnet devices @@ -525,8 +526,7 @@ CONFIG_MII=y # CONFIG_HP100 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set -CONFIG_AMD8111_ETH=y -# CONFIG_AMD8111E_NAPI is not set +# CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set CONFIG_FORCEDETH=y @@ -536,7 +536,7 @@ CONFIG_FORCEDETH=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set -CONFIG_8139CP=m +CONFIG_8139CP=y CONFIG_8139TOO=y # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set @@ -671,6 +671,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -696,6 +697,7 @@ CONFIG_RTC=y # CONFIG_AGP=y CONFIG_AGP_AMD64=y +CONFIG_AGP_INTEL=y # CONFIG_DRM is not set # CONFIG_MWAVE is not set CONFIG_RAW_DRIVER=y @@ -703,7 +705,7 @@ CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y CONFIG_MAX_RAW_DEVS=256 -CONFIG_HANGCHECK_TIMER=y +# CONFIG_HANGCHECK_TIMER is not set # # TPM devices @@ -786,6 +788,8 @@ CONFIG_SOUND_ICH=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -797,8 +801,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -826,7 +828,6 @@ CONFIG_USB_PRINTER=y # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_RW_DETECT is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set @@ -965,7 +966,7 @@ CONFIG_AUTOFS_FS=y # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set +CONFIG_JOLIET=y # CONFIG_ZISOFS is not set # CONFIG_UDF_FS is not set @@ -1092,9 +1093,10 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y -# CONFIG_PRINTK_TIME is not set +CONFIG_LOG_BUF_SHIFT=18 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set diff --git a/arch/x86_64/ia32/ia32_aout.c b/arch/x86_64/ia32/ia32_aout.c index 1965efc974d..c12edf5d97f 100644 --- a/arch/x86_64/ia32/ia32_aout.c +++ b/arch/x86_64/ia32/ia32_aout.c @@ -312,6 +312,7 @@ static int load_aout_binary(struct linux_binprm * bprm, struct pt_regs * regs) current->mm->brk = ex.a_bss + (current->mm->start_brk = N_BSSADDR(ex)); current->mm->free_area_cache = TASK_UNMAPPED_BASE; + current->mm->cached_hole_size = 0; set_mm_counter(current->mm, rss, 0); current->mm->mmap = NULL; diff --git a/arch/x86_64/ia32/ia32_binfmt.c b/arch/x86_64/ia32/ia32_binfmt.c index 99b522052d1..c8131f342cf 100644 --- a/arch/x86_64/ia32/ia32_binfmt.c +++ b/arch/x86_64/ia32/ia32_binfmt.c @@ -46,7 +46,7 @@ struct elf_phdr; #define IA32_EMULATOR 1 -#define ELF_ET_DYN_BASE (TASK_UNMAPPED_32 + 0x1000000) +#define ELF_ET_DYN_BASE (TASK_UNMAPPED_BASE + 0x1000000) #undef ELF_ARCH #define ELF_ARCH EM_386 @@ -307,9 +307,6 @@ MODULE_AUTHOR("Eric Youngdale, Andi Kleen"); #define elf_addr_t __u32 -#undef TASK_SIZE -#define TASK_SIZE 0xffffffff - static void elf32_init(struct pt_regs *); #define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1 diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index 0a3318e08ab..5ca4a4598fd 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_GART_IOMMU) += pci-gart.o aperture.o obj-$(CONFIG_DUMMY_IOMMU) += pci-nommu.o pci-dma.o obj-$(CONFIG_SWIOTLB) += swiotlb.o obj-$(CONFIG_KPROBES) += kprobes.o +obj-$(CONFIG_X86_PM_TIMER) += pmtimer.o obj-$(CONFIG_MODULES) += module.o diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86_64/kernel/aperture.c index a491f72cc96..504e6347499 100644 --- a/arch/x86_64/kernel/aperture.c +++ b/arch/x86_64/kernel/aperture.c @@ -33,12 +33,10 @@ int fallback_aper_force __initdata = 0; int fix_aperture __initdata = 1; -#define NB_ID_3 (PCI_VENDOR_ID_AMD | (0x1103<<16)) +/* This code runs before the PCI subsystem is initialized, so just + access the northbridge directly. */ -static struct resource aper_res = { - .name = "Aperture", - .flags = IORESOURCE_MEM, -}; +#define NB_ID_3 (PCI_VENDOR_ID_AMD | (0x1103<<16)) static u32 __init allocate_aperture(void) { @@ -55,24 +53,11 @@ static u32 __init allocate_aperture(void) aper_size = (32 * 1024 * 1024) << fallback_aper_order; /* - * Aperture has to be naturally aligned. This means an 2GB - * aperture won't have much chances to find a place in the - * lower 4GB of memory. Unfortunately we cannot move it up - * because that would make the IOMMU useless. + * Aperture has to be naturally aligned. This means an 2GB aperture won't + * have much chances to find a place in the lower 4GB of memory. + * Unfortunately we cannot move it up because that would make the + * IOMMU useless. */ - - /* First try to find some free unused space */ - if (!allocate_resource(&iomem_resource, &aper_res, - aper_size, - 0, 0xffffffff, - aper_size, - NULL, NULL)) { - printk(KERN_INFO "Putting aperture at %lx-%lx\n", - aper_res.start, aper_res.end); - return aper_res.start; - } - - /* No free space found. Go on to waste some memory... */ p = __alloc_bootmem_node(nd0, aper_size, aper_size, 0); if (!p || __pa(p)+aper_size > 0xffffffff) { printk("Cannot allocate aperture memory hole (%p,%uK)\n", @@ -81,7 +66,7 @@ static u32 __init allocate_aperture(void) free_bootmem_node(nd0, (unsigned long)p, aper_size); return 0; } - printk("Mapping aperture over %d KB of precious RAM @ %lx\n", + printk("Mapping aperture over %d KB of RAM @ %lx\n", aper_size >> 10, __pa(p)); return (u32)__pa(p); } @@ -102,16 +87,10 @@ static int __init aperture_valid(char *name, u64 aper_base, u32 aper_size) printk("Aperture from %s pointing to e820 RAM. Ignoring.\n",name); return 0; } - /* Don't check the resource here because the aperture is usually - in an e820 reserved area, and we allocated these earlier. */ return 1; } -/* - * Find a PCI capability. - * This code runs before the PCI subsystem is initialized, so just - * access the northbridge directly. - */ +/* Find a PCI capability */ static __u32 __init find_cap(int num, int slot, int func, int cap) { u8 pos; @@ -276,6 +255,8 @@ void __init iommu_hole_init(void) fallback_aper_force) { printk("Your BIOS doesn't leave a aperture memory hole\n"); printk("Please enable the IOMMU option in the BIOS setup\n"); + printk("This costs you %d MB of RAM\n", + 32 << fallback_aper_order); aper_order = fallback_aper_order; aper_alloc = allocate_aperture(); diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c index 7e13545748e..f8e6cc4fecd 100644 --- a/arch/x86_64/kernel/apic.c +++ b/arch/x86_64/kernel/apic.c @@ -33,6 +33,7 @@ #include <asm/mpspec.h> #include <asm/pgalloc.h> #include <asm/mach_apic.h> +#include <asm/nmi.h> int apic_verbosity; @@ -925,7 +926,7 @@ __init int oem_force_hpet_timer(void) unsigned id; DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS); - bitmap_empty(clustermap, NUM_APIC_CLUSTERS); + bitmap_zero(clustermap, NUM_APIC_CLUSTERS); for (i = 0; i < NR_CPUS; i++) { id = bios_cpu_apicid[i]; @@ -1056,7 +1057,7 @@ int __init APIC_init_uniprocessor (void) nr_ioapics = 0; #endif setup_boot_APIC_clock(); - + check_nmi_watchdog(); return 0; } diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S index 1086b5fcac2..28817490fdc 100644 --- a/arch/x86_64/kernel/entry.S +++ b/arch/x86_64/kernel/entry.S @@ -220,13 +220,18 @@ sysret_careful: jmp sysret_check /* Handle a signal */ - /* edx: work flags (arg3) */ sysret_signal: sti + testl $(_TIF_SIGPENDING|_TIF_NOTIFY_RESUME|_TIF_SINGLESTEP),%edx + jz 1f + + /* Really a signal */ + /* edx: work flags (arg3) */ leaq do_notify_resume(%rip),%rax leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1 xorl %esi,%esi # oldset -> arg2 call ptregscall_common +1: movl $_TIF_NEED_RESCHED,%edi jmp sysret_check /* Do syscall tracing */ @@ -484,6 +489,8 @@ retint_careful: jmp retint_check retint_signal: + testl $(_TIF_SIGPENDING|_TIF_NOTIFY_RESUME|_TIF_SINGLESTEP),%edx + jz retint_swapgs sti SAVE_REST movq $-1,ORIG_RAX(%rsp) @@ -492,8 +499,8 @@ retint_signal: call do_notify_resume RESTORE_REST cli + movl $_TIF_NEED_RESCHED,%edi GET_THREAD_INFO(%rcx) - movl $_TIF_WORK_MASK,%edi jmp retint_check #ifdef CONFIG_PREEMPT diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index 60be58617eb..afd87e64d0a 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -37,11 +37,14 @@ #include <asm/desc.h> #include <asm/proto.h> #include <asm/mach_apic.h> +#include <asm/acpi.h> #define __apicdebuginit __init int sis_apic_bug; /* not actually supported, dummy for compile */ +static int no_timer_check; + static DEFINE_SPINLOCK(ioapic_lock); /* @@ -1601,7 +1604,7 @@ static inline void check_timer(void) * Ok, does IRQ0 through the IOAPIC work? */ unmask_IO_APIC_irq(0); - if (timer_irq_works()) { + if (!no_timer_check && timer_irq_works()) { nmi_watchdog_default(); if (nmi_watchdog == NMI_IO_APIC) { disable_8259A_irq(0); @@ -1671,6 +1674,13 @@ static inline void check_timer(void) panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n"); } +static int __init notimercheck(char *s) +{ + no_timer_check = 1; + return 1; +} +__setup("no_timer_check", notimercheck); + /* * * IRQ's that are handled by the PIC in the MPS IOAPIC case. @@ -1804,76 +1814,6 @@ device_initcall(ioapic_init_sysfs); #define IO_APIC_MAX_ID 0xFE -int __init io_apic_get_unique_id (int ioapic, int apic_id) -{ - union IO_APIC_reg_00 reg_00; - static physid_mask_t apic_id_map; - unsigned long flags; - int i = 0; - - /* - * The P4 platform supports up to 256 APIC IDs on two separate APIC - * buses (one for LAPICs, one for IOAPICs), where predecessors only - * supports up to 16 on one shared APIC bus. - * - * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full - * advantage of new APIC bus architecture. - */ - - if (physids_empty(apic_id_map)) - apic_id_map = phys_cpu_present_map; - - spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(ioapic, 0); - spin_unlock_irqrestore(&ioapic_lock, flags); - - if (apic_id >= IO_APIC_MAX_ID) { - apic_printk(APIC_QUIET, KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying " - "%d\n", ioapic, apic_id, reg_00.bits.ID); - apic_id = reg_00.bits.ID; - } - - /* - * Every APIC in a system must have a unique ID or we get lots of nice - * 'stuck on smp_invalidate_needed IPI wait' messages. - */ - if (physid_isset(apic_id, apic_id_map)) { - - for (i = 0; i < IO_APIC_MAX_ID; i++) { - if (!physid_isset(i, apic_id_map)) - break; - } - - if (i == IO_APIC_MAX_ID) - panic("Max apic_id exceeded!\n"); - - apic_printk(APIC_VERBOSE, KERN_WARNING "IOAPIC[%d]: apic_id %d already used, " - "trying %d\n", ioapic, apic_id, i); - - apic_id = i; - } - - physid_set(apic_id, apic_id_map); - - if (reg_00.bits.ID != apic_id) { - reg_00.bits.ID = apic_id; - - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(ioapic, 0, reg_00.raw); - reg_00.raw = io_apic_read(ioapic, 0); - spin_unlock_irqrestore(&ioapic_lock, flags); - - /* Sanity check */ - if (reg_00.bits.ID != apic_id) - panic("IOAPIC[%d]: Unable change apic_id!\n", ioapic); - } - - apic_printk(APIC_VERBOSE,KERN_INFO "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id); - - return apic_id; -} - - int __init io_apic_get_version (int ioapic) { union IO_APIC_reg_01 reg_01; diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c index 7ec031c6ca1..61a63be6b29 100644 --- a/arch/x86_64/kernel/mpparse.c +++ b/arch/x86_64/kernel/mpparse.c @@ -30,6 +30,7 @@ #include <asm/pgalloc.h> #include <asm/io_apic.h> #include <asm/proto.h> +#include <asm/acpi.h> /* Have we found an MP table */ int smp_found_config; @@ -107,6 +108,7 @@ static int __init mpf_checksum(unsigned char *mp, int len) static void __init MP_processor_info (struct mpc_config_processor *m) { int ver; + static int found_bsp=0; if (!(m->mpc_cpuflag & CPU_ENABLED)) return; @@ -126,11 +128,6 @@ static void __init MP_processor_info (struct mpc_config_processor *m) " Processor ignored.\n", NR_CPUS); return; } - if (num_processors >= maxcpus) { - printk(KERN_WARNING "WARNING: maxcpus limit of %i reached." - " Processor ignored.\n", maxcpus); - return; - } num_processors++; @@ -150,7 +147,19 @@ static void __init MP_processor_info (struct mpc_config_processor *m) ver = 0x10; } apic_version[m->mpc_apicid] = ver; - bios_cpu_apicid[num_processors - 1] = m->mpc_apicid; + if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { + /* + * bios_cpu_apicid is required to have processors listed + * in same order as logical cpu numbers. Hence the first + * entry is BSP, and so on. + */ + bios_cpu_apicid[0] = m->mpc_apicid; + x86_cpu_to_apicid[0] = m->mpc_apicid; + found_bsp = 1; + } else { + bios_cpu_apicid[num_processors - found_bsp] = m->mpc_apicid; + x86_cpu_to_apicid[num_processors - found_bsp] = m->mpc_apicid; + } } static void __init MP_bus_info (struct mpc_config_bus *m) @@ -759,7 +768,7 @@ void __init mp_register_ioapic ( mp_ioapics[idx].mpc_apicaddr = address; set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); - mp_ioapics[idx].mpc_apicid = io_apic_get_unique_id(idx, id); + mp_ioapics[idx].mpc_apicid = id; mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); /* diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index 61de0b34a01..31c0f2e6ac9 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -33,6 +33,7 @@ #include <asm/msr.h> #include <asm/proto.h> #include <asm/kdebug.h> +#include <asm/local.h> /* * lapic_nmi_owner tracks the ownership of the lapic NMI hardware: @@ -59,7 +60,8 @@ int panic_on_timeout; unsigned int nmi_watchdog = NMI_DEFAULT; static unsigned int nmi_hz = HZ; -unsigned int nmi_perfctr_msr; /* the MSR to reset in NMI handler */ +static unsigned int nmi_perfctr_msr; /* the MSR to reset in NMI handler */ +static unsigned int nmi_p4_cccr_val; /* Note that these events don't tick when the CPU idles. This means the frequency varies with CPU load. */ @@ -71,61 +73,87 @@ unsigned int nmi_perfctr_msr; /* the MSR to reset in NMI handler */ #define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76 #define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING -#define P6_EVNTSEL0_ENABLE (1 << 22) -#define P6_EVNTSEL_INT (1 << 20) -#define P6_EVNTSEL_OS (1 << 17) -#define P6_EVNTSEL_USR (1 << 16) -#define P6_EVENT_CPU_CLOCKS_NOT_HALTED 0x79 -#define P6_NMI_EVENT P6_EVENT_CPU_CLOCKS_NOT_HALTED +#define MSR_P4_MISC_ENABLE 0x1A0 +#define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7) +#define MSR_P4_MISC_ENABLE_PEBS_UNAVAIL (1<<12) +#define MSR_P4_PERFCTR0 0x300 +#define MSR_P4_CCCR0 0x360 +#define P4_ESCR_EVENT_SELECT(N) ((N)<<25) +#define P4_ESCR_OS (1<<3) +#define P4_ESCR_USR (1<<2) +#define P4_CCCR_OVF_PMI0 (1<<26) +#define P4_CCCR_OVF_PMI1 (1<<27) +#define P4_CCCR_THRESHOLD(N) ((N)<<20) +#define P4_CCCR_COMPLEMENT (1<<19) +#define P4_CCCR_COMPARE (1<<18) +#define P4_CCCR_REQUIRED (3<<16) +#define P4_CCCR_ESCR_SELECT(N) ((N)<<13) +#define P4_CCCR_ENABLE (1<<12) +/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter + CRU_ESCR0 (with any non-null event selector) through a complemented + max threshold. [IA32-Vol3, Section 14.9.9] */ +#define MSR_P4_IQ_COUNTER0 0x30C +#define P4_NMI_CRU_ESCR0 (P4_ESCR_EVENT_SELECT(0x3F)|P4_ESCR_OS|P4_ESCR_USR) +#define P4_NMI_IQ_CCCR0 \ + (P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT| \ + P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE) + +static __init inline int nmi_known_cpu(void) +{ + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_AMD: + return boot_cpu_data.x86 == 15; + case X86_VENDOR_INTEL: + return boot_cpu_data.x86 == 15; + } + return 0; +} /* Run after command line and cpu_init init, but before all other checks */ void __init nmi_watchdog_default(void) { if (nmi_watchdog != NMI_DEFAULT) return; - - /* For some reason the IO APIC watchdog doesn't work on the AMD - 8111 chipset. For now switch to local APIC mode using - perfctr0 there. On Intel CPUs we don't have code to handle - the perfctr and the IO-APIC seems to work, so use that. */ - - if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) { - nmi_watchdog = NMI_LOCAL_APIC; - printk(KERN_INFO - "Using local APIC NMI watchdog using perfctr0\n"); - } else { - printk(KERN_INFO "Using IO APIC NMI watchdog\n"); + if (nmi_known_cpu()) + nmi_watchdog = NMI_LOCAL_APIC; + else nmi_watchdog = NMI_IO_APIC; - } } -/* Why is there no CPUID flag for this? */ -static __init int cpu_has_lapic(void) +#ifdef CONFIG_SMP +/* The performance counters used by NMI_LOCAL_APIC don't trigger when + * the CPU is idle. To make sure the NMI watchdog really ticks on all + * CPUs during the test make them busy. + */ +static __init void nmi_cpu_busy(void *data) { - switch (boot_cpu_data.x86_vendor) { - case X86_VENDOR_INTEL: - case X86_VENDOR_AMD: - return boot_cpu_data.x86 >= 6; - /* .... add more cpus here or find a different way to figure this out. */ - default: - return 0; - } + volatile int *endflag = data; + local_irq_enable(); + /* Intentionally don't use cpu_relax here. This is + to make sure that the performance counter really ticks, + even if there is a simulator or similar that catches the + pause instruction. On a real HT machine this is fine because + all other CPUs are busy with "useless" delay loops and don't + care if they get somewhat less cycles. */ + while (*endflag == 0) + barrier(); } +#endif -static int __init check_nmi_watchdog (void) +int __init check_nmi_watchdog (void) { - int counts[NR_CPUS]; + volatile int endflag = 0; + int *counts; int cpu; - if (nmi_watchdog == NMI_NONE) - return 0; + counts = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); + if (!counts) + return -1; - if (nmi_watchdog == NMI_LOCAL_APIC && !cpu_has_lapic()) { - nmi_watchdog = NMI_NONE; - return -1; - } + printk(KERN_INFO "testing NMI watchdog ... "); - printk(KERN_INFO "Testing NMI watchdog ... "); + if (nmi_watchdog == NMI_LOCAL_APIC) + smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); for (cpu = 0; cpu < NR_CPUS; cpu++) counts[cpu] = cpu_pda[cpu].__nmi_count; @@ -133,15 +161,22 @@ static int __init check_nmi_watchdog (void) mdelay((10*1000)/nmi_hz); // wait 10 ticks for (cpu = 0; cpu < NR_CPUS; cpu++) { + if (!cpu_online(cpu)) + continue; if (cpu_pda[cpu].__nmi_count - counts[cpu] <= 5) { - printk("CPU#%d: NMI appears to be stuck (%d)!\n", + endflag = 1; + printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n", cpu, + counts[cpu], cpu_pda[cpu].__nmi_count); nmi_active = 0; lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG; + nmi_perfctr_msr = 0; + kfree(counts); return -1; } } + endflag = 1; printk("OK.\n"); /* now that we know it works we can reduce NMI frequency to @@ -149,10 +184,9 @@ static int __init check_nmi_watchdog (void) if (nmi_watchdog == NMI_LOCAL_APIC) nmi_hz = 1; + kfree(counts); return 0; } -/* Have this called later during boot so counters are updating */ -late_initcall(check_nmi_watchdog); int __init setup_nmi_watchdog(char *str) { @@ -170,7 +204,7 @@ int __init setup_nmi_watchdog(char *str) if (nmi >= NMI_INVALID) return 0; - nmi_watchdog = nmi; + nmi_watchdog = nmi; return 1; } @@ -185,7 +219,10 @@ static void disable_lapic_nmi_watchdog(void) wrmsr(MSR_K7_EVNTSEL0, 0, 0); break; case X86_VENDOR_INTEL: - wrmsr(MSR_IA32_EVNTSEL0, 0, 0); + if (boot_cpu_data.x86 == 15) { + wrmsr(MSR_P4_IQ_CCCR0, 0, 0); + wrmsr(MSR_P4_CRU_ESCR0, 0, 0); + } break; } nmi_active = -1; @@ -253,7 +290,7 @@ void enable_timer_nmi_watchdog(void) static int nmi_pm_active; /* nmi_active before suspend */ -static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) +static int lapic_nmi_suspend(struct sys_device *dev, u32 state) { nmi_pm_active = nmi_active; disable_lapic_nmi_watchdog(); @@ -300,22 +337,27 @@ late_initcall(init_lapic_nmi_sysfs); * Original code written by Keith Owens. */ +static void clear_msr_range(unsigned int base, unsigned int n) +{ + unsigned int i; + + for(i = 0; i < n; ++i) + wrmsr(base+i, 0, 0); +} + static void setup_k7_watchdog(void) { int i; unsigned int evntsel; - /* No check, so can start with slow frequency */ - nmi_hz = 1; - - /* XXX should check these in EFER */ - nmi_perfctr_msr = MSR_K7_PERFCTR0; for(i = 0; i < 4; ++i) { /* Simulator may not support it */ - if (checking_wrmsrl(MSR_K7_EVNTSEL0+i, 0UL)) + if (checking_wrmsrl(MSR_K7_EVNTSEL0+i, 0UL)) { + nmi_perfctr_msr = 0; return; + } wrmsrl(MSR_K7_PERFCTR0+i, 0UL); } @@ -325,12 +367,54 @@ static void setup_k7_watchdog(void) | K7_NMI_EVENT; wrmsr(MSR_K7_EVNTSEL0, evntsel, 0); - wrmsrl(MSR_K7_PERFCTR0, -((u64)cpu_khz*1000) / nmi_hz); + wrmsr(MSR_K7_PERFCTR0, -(cpu_khz/nmi_hz*1000), -1); apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= K7_EVNTSEL_ENABLE; wrmsr(MSR_K7_EVNTSEL0, evntsel, 0); } + +static int setup_p4_watchdog(void) +{ + unsigned int misc_enable, dummy; + + rdmsr(MSR_P4_MISC_ENABLE, misc_enable, dummy); + if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL)) + return 0; + + nmi_perfctr_msr = MSR_P4_IQ_COUNTER0; + nmi_p4_cccr_val = P4_NMI_IQ_CCCR0; +#ifdef CONFIG_SMP + if (smp_num_siblings == 2) + nmi_p4_cccr_val |= P4_CCCR_OVF_PMI1; +#endif + + if (!(misc_enable & MSR_P4_MISC_ENABLE_PEBS_UNAVAIL)) + clear_msr_range(0x3F1, 2); + /* MSR 0x3F0 seems to have a default value of 0xFC00, but current + docs doesn't fully define it, so leave it alone for now. */ + if (boot_cpu_data.x86_model >= 0x3) { + /* MSR_P4_IQ_ESCR0/1 (0x3ba/0x3bb) removed */ + clear_msr_range(0x3A0, 26); + clear_msr_range(0x3BC, 3); + } else { + clear_msr_range(0x3A0, 31); + } + clear_msr_range(0x3C0, 6); + clear_msr_range(0x3C8, 6); + clear_msr_range(0x3E0, 2); + clear_msr_range(MSR_P4_CCCR0, 18); + clear_msr_range(MSR_P4_PERFCTR0, 18); + + wrmsr(MSR_P4_CRU_ESCR0, P4_NMI_CRU_ESCR0, 0); + wrmsr(MSR_P4_IQ_CCCR0, P4_NMI_IQ_CCCR0 & ~P4_CCCR_ENABLE, 0); + Dprintk("setting P4_IQ_COUNTER0 to 0x%08lx\n", -(cpu_khz/nmi_hz*1000)); + wrmsr(MSR_P4_IQ_COUNTER0, -(cpu_khz/nmi_hz*1000), -1); + apic_write(APIC_LVTPC, APIC_DM_NMI); + wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0); + return 1; +} + void setup_apic_nmi_watchdog(void) { switch (boot_cpu_data.x86_vendor) { @@ -341,6 +425,13 @@ void setup_apic_nmi_watchdog(void) return; setup_k7_watchdog(); break; + case X86_VENDOR_INTEL: + if (boot_cpu_data.x86 != 15) + return; + if (!setup_p4_watchdog()) + return; + break; + default: return; } @@ -355,56 +446,67 @@ void setup_apic_nmi_watchdog(void) * * as these watchdog NMI IRQs are generated on every CPU, we only * have to check the current processor. - * - * since NMIs don't listen to _any_ locks, we have to be extremely - * careful not to rely on unsafe variables. The printk might lock - * up though, so we have to break up any console locks first ... - * [when there will be more tty-related locks, break them up - * here too!] */ -static unsigned int - last_irq_sums [NR_CPUS], - alert_counter [NR_CPUS]; +static DEFINE_PER_CPU(unsigned, last_irq_sum); +static DEFINE_PER_CPU(local_t, alert_counter); +static DEFINE_PER_CPU(int, nmi_touch); void touch_nmi_watchdog (void) { int i; /* - * Just reset the alert counters, (other CPUs might be - * spinning on locks we hold): + * Tell other CPUs to reset their alert counters. We cannot + * do it ourselves because the alert count increase is not + * atomic. */ for (i = 0; i < NR_CPUS; i++) - alert_counter[i] = 0; + per_cpu(nmi_touch, i) = 1; } void nmi_watchdog_tick (struct pt_regs * regs, unsigned reason) { - int sum, cpu; + int sum; + int touched = 0; - cpu = safe_smp_processor_id(); sum = read_pda(apic_timer_irqs); - if (last_irq_sums[cpu] == sum) { + if (__get_cpu_var(nmi_touch)) { + __get_cpu_var(nmi_touch) = 0; + touched = 1; + } + if (!touched && __get_cpu_var(last_irq_sum) == sum) { /* * Ayiee, looks like this CPU is stuck ... * wait a few IRQs (5 seconds) before doing the oops ... */ - alert_counter[cpu]++; - if (alert_counter[cpu] == 5*nmi_hz) { + local_inc(&__get_cpu_var(alert_counter)); + if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) { if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP) { - alert_counter[cpu] = 0; + local_set(&__get_cpu_var(alert_counter), 0); return; } die_nmi("NMI Watchdog detected LOCKUP on CPU%d", regs); } } else { - last_irq_sums[cpu] = sum; - alert_counter[cpu] = 0; + __get_cpu_var(last_irq_sum) = sum; + local_set(&__get_cpu_var(alert_counter), 0); } - if (nmi_perfctr_msr) + if (nmi_perfctr_msr) { + if (nmi_perfctr_msr == MSR_P4_IQ_COUNTER0) { + /* + * P4 quirks: + * - An overflown perfctr will assert its interrupt + * until the OVF flag in its CCCR is cleared. + * - LVTPC is masked on interrupt and must be + * unmasked by the LVTPC handler. + */ + wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0); + apic_write(APIC_LVTPC, APIC_DM_NMI); + } wrmsr(nmi_perfctr_msr, -(cpu_khz/nmi_hz*1000), -1); + } } static int dummy_nmi_callback(struct pt_regs * regs, int cpu) diff --git a/arch/x86_64/kernel/pmtimer.c b/arch/x86_64/kernel/pmtimer.c new file mode 100644 index 00000000000..feb5f108dd2 --- /dev/null +++ b/arch/x86_64/kernel/pmtimer.c @@ -0,0 +1,101 @@ +/* Ported over from i386 by AK, original copyright was: + * + * (C) Dominik Brodowski <linux@brodo.de> 2003 + * + * Driver to use the Power Management Timer (PMTMR) available in some + * southbridges as primary timing source for the Linux kernel. + * + * Based on parts of linux/drivers/acpi/hardware/hwtimer.c, timer_pit.c, + * timer_hpet.c, and on Arjan van de Ven's implementation for 2.4. + * + * This file is licensed under the GPL v2. + * + * Dropped all the hardware bug workarounds for now. Hopefully they + * are not needed on 64bit chipsets. + */ + +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/time.h> +#include <linux/init.h> +#include <linux/cpumask.h> +#include <asm/io.h> +#include <asm/proto.h> +#include <asm/msr.h> +#include <asm/vsyscall.h> + +/* The I/O port the PMTMR resides at. + * The location is detected during setup_arch(), + * in arch/i386/kernel/acpi/boot.c */ +u32 pmtmr_ioport; + +/* value of the Power timer at last timer interrupt */ +static u32 offset_delay; +static u32 last_pmtmr_tick; + +#define ACPI_PM_MASK 0xFFFFFF /* limit it to 24 bits */ + +static inline u32 cyc2us(u32 cycles) +{ + /* The Power Management Timer ticks at 3.579545 ticks per microsecond. + * 1 / PM_TIMER_FREQUENCY == 0.27936511 =~ 286/1024 [error: 0.024%] + * + * Even with HZ = 100, delta is at maximum 35796 ticks, so it can + * easily be multiplied with 286 (=0x11E) without having to fear + * u32 overflows. + */ + cycles *= 286; + return (cycles >> 10); +} + +int pmtimer_mark_offset(void) +{ + static int first_run = 1; + unsigned long tsc; + u32 lost; + + u32 tick = inl(pmtmr_ioport); + u32 delta; + + delta = cyc2us((tick - last_pmtmr_tick) & ACPI_PM_MASK); + + last_pmtmr_tick = tick; + monotonic_base += delta * NSEC_PER_USEC; + + delta += offset_delay; + + lost = delta / (USEC_PER_SEC / HZ); + offset_delay = delta % (USEC_PER_SEC / HZ); + + rdtscll(tsc); + vxtime.last_tsc = tsc - offset_delay * cpu_khz; + + /* don't calculate delay for first run, + or if we've got less then a tick */ + if (first_run || (lost < 1)) { + first_run = 0; + offset_delay = 0; + } + + return lost - 1; +} + +unsigned int do_gettimeoffset_pm(void) +{ + u32 now, offset, delta = 0; + + offset = last_pmtmr_tick; + now = inl(pmtmr_ioport); + delta = (now - offset) & ACPI_PM_MASK; + + return offset_delay + cyc2us(delta); +} + + +static int __init nopmtimer_setup(char *s) +{ + pmtmr_ioport = 0; + return 0; +} + +__setup("nopmtimer", nopmtimer_setup); diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c index 761b6d35e33..dce8bab4306 100644 --- a/arch/x86_64/kernel/process.c +++ b/arch/x86_64/kernel/process.c @@ -656,7 +656,7 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr) switch (code) { case ARCH_SET_GS: - if (addr >= TASK_SIZE) + if (addr >= TASK_SIZE_OF(task)) return -EPERM; cpu = get_cpu(); /* handle small bases via the GDT because that's faster to @@ -682,7 +682,7 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr) case ARCH_SET_FS: /* Not strictly needed for fs, but do it for symmetry with gs */ - if (addr >= TASK_SIZE) + if (addr >= TASK_SIZE_OF(task)) return -EPERM; cpu = get_cpu(); /* handle small bases via the GDT because that's faster to diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86_64/kernel/ptrace.c index e26e86bb56f..bbf64b59a21 100644 --- a/arch/x86_64/kernel/ptrace.c +++ b/arch/x86_64/kernel/ptrace.c @@ -257,13 +257,13 @@ static int putreg(struct task_struct *child, value &= 0xffff; return 0; case offsetof(struct user_regs_struct,fs_base): - if (!((value >> 48) == 0 || (value >> 48) == 0xffff)) - return -EIO; + if (value >= TASK_SIZE_OF(child)) + return -EIO; child->thread.fs = value; return 0; case offsetof(struct user_regs_struct,gs_base): - if (!((value >> 48) == 0 || (value >> 48) == 0xffff)) - return -EIO; + if (value >= TASK_SIZE_OF(child)) + return -EIO; child->thread.gs = value; return 0; case offsetof(struct user_regs_struct, eflags): @@ -277,6 +277,11 @@ static int putreg(struct task_struct *child, return -EIO; value &= 0xffff; break; + case offsetof(struct user_regs_struct, rip): + /* Check if the new RIP address is canonical */ + if (value >= TASK_SIZE_OF(child)) + return -EIO; + break; } put_stack_long(child, regno - sizeof(struct pt_regs), value); return 0; @@ -375,7 +380,7 @@ asmlinkage long sys_ptrace(long request, long pid, unsigned long addr, long data break; switch (addr) { - case 0 ... sizeof(struct user_regs_struct): + case 0 ... sizeof(struct user_regs_struct) - sizeof(long): tmp = getreg(child, addr); break; case offsetof(struct user, u_debugreg[0]): @@ -414,33 +419,35 @@ asmlinkage long sys_ptrace(long request, long pid, unsigned long addr, long data break; case PTRACE_POKEUSR: /* write the word at location addr in the USER area */ + { + int dsize = test_tsk_thread_flag(child, TIF_IA32) ? 3 : 7; ret = -EIO; if ((addr & 7) || addr > sizeof(struct user) - 7) break; switch (addr) { - case 0 ... sizeof(struct user_regs_struct): + case 0 ... sizeof(struct user_regs_struct) - sizeof(long): ret = putreg(child, addr, data); break; /* Disallows to set a breakpoint into the vsyscall */ case offsetof(struct user, u_debugreg[0]): - if (data >= TASK_SIZE-7) break; + if (data >= TASK_SIZE_OF(child) - dsize) break; child->thread.debugreg0 = data; ret = 0; break; case offsetof(struct user, u_debugreg[1]): - if (data >= TASK_SIZE-7) break; + if (data >= TASK_SIZE_OF(child) - dsize) break; child->thread.debugreg1 = data; ret = 0; break; case offsetof(struct user, u_debugreg[2]): - if (data >= TASK_SIZE-7) break; + if (data >= TASK_SIZE_OF(child) - dsize) break; child->thread.debugreg2 = data; ret = 0; break; case offsetof(struct user, u_debugreg[3]): - if (data >= TASK_SIZE-7) break; + if (data >= TASK_SIZE_OF(child) - dsize) break; child->thread.debugreg3 = data; ret = 0; break; @@ -464,6 +471,7 @@ asmlinkage long sys_ptrace(long request, long pid, unsigned long addr, long data break; } break; + } case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ case PTRACE_CONT: /* restart after signal. */ diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 2129cf9ba6b..99f038ede23 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -719,7 +719,6 @@ static void __init display_cacheinfo(struct cpuinfo_x86 *c) } } -#ifdef CONFIG_SMP /* * On a AMD dual core setup the lower bits of the APIC id distingush the cores. * Assumes number of cores is a power of two. @@ -727,17 +726,26 @@ static void __init display_cacheinfo(struct cpuinfo_x86 *c) static void __init amd_detect_cmp(struct cpuinfo_x86 *c) { #ifdef CONFIG_SMP - int cpu = c->x86_apicid; + int cpu = smp_processor_id(); int node = 0; + unsigned bits; if (c->x86_num_cores == 1) return; - cpu_core_id[cpu] = cpu >> hweight32(c->x86_num_cores - 1); + + bits = 0; + while ((1 << bits) < c->x86_num_cores) + bits++; + + /* Low order bits define the core id (index of core in socket) */ + cpu_core_id[cpu] = phys_proc_id[cpu] & ((1 << bits)-1); + /* Convert the APIC ID into the socket ID */ + phys_proc_id[cpu] >>= bits; #ifdef CONFIG_NUMA /* When an ACPI SRAT table is available use the mappings from SRAT instead. */ if (acpi_numa <= 0) { - node = cpu_core_id[cpu]; + node = phys_proc_id[cpu]; if (!node_online(node)) node = first_node(node_online_map); cpu_to_node[cpu] = node; @@ -745,15 +753,11 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) node = cpu_to_node[cpu]; } #endif + printk(KERN_INFO "CPU %d(%d) -> Node %d -> Core %d\n", cpu, c->x86_num_cores, node, cpu_core_id[cpu]); #endif } -#else -static void __init amd_detect_cmp(struct cpuinfo_x86 *c) -{ -} -#endif static int __init init_amd(struct cpuinfo_x86 *c) { @@ -925,7 +929,6 @@ void __init early_identify_cpu(struct cpuinfo_x86 *c) c->x86_clflush_size = 64; c->x86_cache_alignment = c->x86_clflush_size; c->x86_num_cores = 1; - c->x86_apicid = c == &boot_cpu_data ? 0 : c - cpu_data; c->extended_cpuid_level = 0; memset(&c->x86_capability, 0, sizeof c->x86_capability); @@ -954,11 +957,14 @@ void __init early_identify_cpu(struct cpuinfo_x86 *c) } if (c->x86_capability[0] & (1<<19)) c->x86_clflush_size = ((misc >> 8) & 0xff) * 8; - c->x86_apicid = misc >> 24; } else { /* Have CPUID level 0 only - unheard of */ c->x86 = 4; } + +#ifdef CONFIG_SMP + phys_proc_id[smp_processor_id()] = (cpuid_ebx(1) >> 24) & 0xff; +#endif } /* @@ -1088,7 +1094,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* Other (Linux-defined) */ - "cxmmx", NULL, "cyrix_arr", "centaur_mcr", "k8c+", + "cxmmx", NULL, "cyrix_arr", "centaur_mcr", NULL, "constant_tsc", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, diff --git a/arch/x86_64/kernel/signal.c b/arch/x86_64/kernel/signal.c index d439ced150c..429c0269dc4 100644 --- a/arch/x86_64/kernel/signal.c +++ b/arch/x86_64/kernel/signal.c @@ -28,6 +28,7 @@ #include <asm/uaccess.h> #include <asm/i387.h> #include <asm/proto.h> +#include <asm/ia32_unistd.h> /* #define DEBUG_SIG 1 */ @@ -452,7 +453,9 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset) regs->rip -= 2; } if (regs->rax == (unsigned long)-ERESTART_RESTARTBLOCK) { - regs->rax = __NR_restart_syscall; + regs->rax = test_thread_flag(TIF_IA32) ? + __NR_ia32_restart_syscall : + __NR_restart_syscall; regs->rip -= 2; } } diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index 73f7e8b9543..f1ec0f34594 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -56,6 +56,7 @@ #include <asm/kdebug.h> #include <asm/tlbflush.h> #include <asm/proto.h> +#include <asm/nmi.h> /* Change for real CPU hotplug. Note other files need to be fixed first too. */ @@ -93,6 +94,7 @@ int smp_threads_ready; cpumask_t cpu_sibling_map[NR_CPUS] __cacheline_aligned; cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned; +EXPORT_SYMBOL(cpu_core_map); /* * Trampoline 80x86 program as an array. @@ -125,96 +127,210 @@ static void __cpuinit smp_store_cpu_info(int id) *c = boot_cpu_data; identify_cpu(c); + print_cpu_info(c); } /* - * Synchronize TSCs of CPUs + * New Funky TSC sync algorithm borrowed from IA64. + * Main advantage is that it doesn't reset the TSCs fully and + * in general looks more robust and it works better than my earlier + * attempts. I believe it was written by David Mosberger. Some minor + * adjustments for x86-64 by me -AK * - * This new algorithm is less accurate than the old "zero TSCs" - * one, but we cannot zero TSCs anymore in the new hotplug CPU - * model. + * Original comment reproduced below. + * + * Synchronize TSC of the current (slave) CPU with the TSC of the + * MASTER CPU (normally the time-keeper CPU). We use a closed loop to + * eliminate the possibility of unaccounted-for errors (such as + * getting a machine check in the middle of a calibration step). The + * basic idea is for the slave to ask the master what itc value it has + * and to read its own itc before and after the master responds. Each + * iteration gives us three timestamps: + * + * slave master + * + * t0 ---\ + * ---\ + * ---> + * tm + * /--- + * /--- + * t1 <--- + * + * + * The goal is to adjust the slave's TSC such that tm falls exactly + * half-way between t0 and t1. If we achieve this, the clocks are + * synchronized provided the interconnect between the slave and the + * master is symmetric. Even if the interconnect were asymmetric, we + * would still know that the synchronization error is smaller than the + * roundtrip latency (t0 - t1). + * + * When the interconnect is quiet and symmetric, this lets us + * synchronize the TSC to within one or two cycles. However, we can + * only *guarantee* that the synchronization is accurate to within a + * round-trip time, which is typically in the range of several hundred + * cycles (e.g., ~500 cycles). In practice, this means that the TSCs + * are usually almost perfectly synchronized, but we shouldn't assume + * that the accuracy is much better than half a micro second or so. + * + * [there are other errors like the latency of RDTSC and of the + * WRMSR. These can also account to hundreds of cycles. So it's + * probably worse. It claims 153 cycles error on a dual Opteron, + * but I suspect the numbers are actually somewhat worse -AK] */ -static atomic_t __cpuinitdata tsc_flag; +#define MASTER 0 +#define SLAVE (SMP_CACHE_BYTES/8) + +/* Intentionally don't use cpu_relax() while TSC synchronization + because we don't want to go into funky power save modi or cause + hypervisors to schedule us away. Going to sleep would likely affect + latency and low latency is the primary objective here. -AK */ +#define no_cpu_relax() barrier() + static __cpuinitdata DEFINE_SPINLOCK(tsc_sync_lock); -static unsigned long long __cpuinitdata bp_tsc, ap_tsc; +static volatile __cpuinitdata unsigned long go[SLAVE + 1]; +static int notscsync __cpuinitdata; + +#undef DEBUG_TSC_SYNC -#define NR_LOOPS 5 +#define NUM_ROUNDS 64 /* magic value */ +#define NUM_ITERS 5 /* likewise */ -static void __cpuinit sync_tsc_bp_init(int init) +/* Callback on boot CPU */ +static __cpuinit void sync_master(void *arg) { - if (init) - _raw_spin_lock(&tsc_sync_lock); - else - _raw_spin_unlock(&tsc_sync_lock); - atomic_set(&tsc_flag, 0); + unsigned long flags, i; + + if (smp_processor_id() != boot_cpu_id) + return; + + go[MASTER] = 0; + + local_irq_save(flags); + { + for (i = 0; i < NUM_ROUNDS*NUM_ITERS; ++i) { + while (!go[MASTER]) + no_cpu_relax(); + go[MASTER] = 0; + rdtscll(go[SLAVE]); + } + } + local_irq_restore(flags); } /* - * Synchronize TSC on AP with BP. + * Return the number of cycles by which our tsc differs from the tsc + * on the master (time-keeper) CPU. A positive number indicates our + * tsc is ahead of the master, negative that it is behind. */ -static void __cpuinit __sync_tsc_ap(void) +static inline long +get_delta(long *rt, long *master) { - if (!cpu_has_tsc) - return; - Dprintk("AP %d syncing TSC\n", smp_processor_id()); + unsigned long best_t0 = 0, best_t1 = ~0UL, best_tm = 0; + unsigned long tcenter, t0, t1, tm; + int i; - while (atomic_read(&tsc_flag) != 0) - cpu_relax(); - atomic_inc(&tsc_flag); - mb(); - _raw_spin_lock(&tsc_sync_lock); - wrmsrl(MSR_IA32_TSC, bp_tsc); - _raw_spin_unlock(&tsc_sync_lock); - rdtscll(ap_tsc); - mb(); - atomic_inc(&tsc_flag); - mb(); + for (i = 0; i < NUM_ITERS; ++i) { + rdtscll(t0); + go[MASTER] = 1; + while (!(tm = go[SLAVE])) + no_cpu_relax(); + go[SLAVE] = 0; + rdtscll(t1); + + if (t1 - t0 < best_t1 - best_t0) + best_t0 = t0, best_t1 = t1, best_tm = tm; + } + + *rt = best_t1 - best_t0; + *master = best_tm - best_t0; + + /* average best_t0 and best_t1 without overflow: */ + tcenter = (best_t0/2 + best_t1/2); + if (best_t0 % 2 + best_t1 % 2 == 2) + ++tcenter; + return tcenter - best_tm; } -static void __cpuinit sync_tsc_ap(void) +static __cpuinit void sync_tsc(void) { - int i; - for (i = 0; i < NR_LOOPS; i++) - __sync_tsc_ap(); + int i, done = 0; + long delta, adj, adjust_latency = 0; + unsigned long flags, rt, master_time_stamp, bound; +#if DEBUG_TSC_SYNC + static struct syncdebug { + long rt; /* roundtrip time */ + long master; /* master's timestamp */ + long diff; /* difference between midpoint and master's timestamp */ + long lat; /* estimate of tsc adjustment latency */ + } t[NUM_ROUNDS] __cpuinitdata; +#endif + + go[MASTER] = 1; + + smp_call_function(sync_master, NULL, 1, 0); + + while (go[MASTER]) /* wait for master to be ready */ + no_cpu_relax(); + + spin_lock_irqsave(&tsc_sync_lock, flags); + { + for (i = 0; i < NUM_ROUNDS; ++i) { + delta = get_delta(&rt, &master_time_stamp); + if (delta == 0) { + done = 1; /* let's lock on to this... */ + bound = rt; + } + + if (!done) { + unsigned long t; + if (i > 0) { + adjust_latency += -delta; + adj = -delta + adjust_latency/4; + } else + adj = -delta; + + rdtscll(t); + wrmsrl(MSR_IA32_TSC, t + adj); + } +#if DEBUG_TSC_SYNC + t[i].rt = rt; + t[i].master = master_time_stamp; + t[i].diff = delta; + t[i].lat = adjust_latency/4; +#endif + } + } + spin_unlock_irqrestore(&tsc_sync_lock, flags); + +#if DEBUG_TSC_SYNC + for (i = 0; i < NUM_ROUNDS; ++i) + printk("rt=%5ld master=%5ld diff=%5ld adjlat=%5ld\n", + t[i].rt, t[i].master, t[i].diff, t[i].lat); +#endif + + printk(KERN_INFO + "CPU %d: synchronized TSC with CPU %u (last diff %ld cycles, " + "maxerr %lu cycles)\n", + smp_processor_id(), boot_cpu_id, delta, rt); } -/* - * Synchronize TSC from BP to AP. - */ -static void __cpuinit __sync_tsc_bp(int cpu) +static void __cpuinit tsc_sync_wait(void) { - if (!cpu_has_tsc) + if (notscsync || !cpu_has_tsc) return; - - /* Wait for AP */ - while (atomic_read(&tsc_flag) == 0) - cpu_relax(); - /* Save BPs TSC */ - sync_core(); - rdtscll(bp_tsc); - /* Don't do the sync core here to avoid too much latency. */ - mb(); - /* Start the AP */ - _raw_spin_unlock(&tsc_sync_lock); - /* Wait for AP again */ - while (atomic_read(&tsc_flag) < 2) - cpu_relax(); - rdtscl(bp_tsc); - barrier(); + printk(KERN_INFO "CPU %d: Syncing TSC to CPU %u.\n", smp_processor_id(), + boot_cpu_id); + sync_tsc(); } -static void __cpuinit sync_tsc_bp(int cpu) +static __init int notscsync_setup(char *s) { - int i; - for (i = 0; i < NR_LOOPS - 1; i++) { - __sync_tsc_bp(cpu); - sync_tsc_bp_init(1); - } - __sync_tsc_bp(cpu); - printk(KERN_INFO "Synced TSC of CPU %d difference %Ld\n", - cpu, ap_tsc - bp_tsc); + notscsync = 1; + return 0; } +__setup("notscsync", notscsync_setup); static atomic_t init_deasserted __cpuinitdata; @@ -315,11 +431,6 @@ void __cpuinit start_secondary(void) cpu_init(); smp_callin(); - /* - * Synchronize the TSC with the BP - */ - sync_tsc_ap(); - /* otherwise gcc will move up the smp_processor_id before the cpu_init */ barrier(); @@ -334,7 +445,6 @@ void __cpuinit start_secondary(void) enable_8259A_irq(0); } - enable_APIC_timer(); /* @@ -343,6 +453,11 @@ void __cpuinit start_secondary(void) cpu_set(smp_processor_id(), cpu_online_map); mb(); + /* Wait for TSC sync to not schedule things before. + We still process interrupts, which could see an inconsistent + time in that window unfortunately. */ + tsc_sync_wait(); + cpu_idle(); } @@ -531,7 +646,6 @@ static int __cpuinit do_boot_cpu(int cpu, int apicid) printk("failed fork for CPU %d\n", cpu); return PTR_ERR(idle); } - x86_cpu_to_apicid[cpu] = apicid; cpu_pda[cpu].pcurrent = idle; @@ -600,8 +714,6 @@ static int __cpuinit do_boot_cpu(int cpu, int apicid) if (cpu_isset(cpu, cpu_callin_map)) { /* number CPUs logically, starting from 1 (BSP is 0) */ - Dprintk("OK.\n"); - print_cpu_info(&cpu_data[cpu]); Dprintk("CPU has booted.\n"); } else { boot_error = 1; @@ -842,7 +954,6 @@ void __cpuinit smp_prepare_cpus(unsigned int max_cpus) GET_APIC_ID(apic_read(APIC_ID)), boot_cpu_id); /* Or can we switch back to PIC here? */ } - x86_cpu_to_apicid[0] = boot_cpu_id; /* * Now start the IO-APICs @@ -889,18 +1000,14 @@ int __cpuinit __cpu_up(unsigned int cpu) printk("__cpu_up: bad cpu %d\n", cpu); return -EINVAL; } - sync_tsc_bp_init(1); /* Boot it! */ err = do_boot_cpu(cpu, apicid); if (err < 0) { - sync_tsc_bp_init(0); Dprintk("do_boot_cpu failed %d\n", err); return err; } - sync_tsc_bp(cpu); - /* Unleash the CPU! */ Dprintk("waiting for cpu %d\n", cpu); @@ -923,4 +1030,6 @@ void __cpuinit smp_cpus_done(unsigned int max_cpus) detect_siblings(); time_init_gtod(); + + check_nmi_watchdog(); } diff --git a/arch/x86_64/kernel/sys_x86_64.c b/arch/x86_64/kernel/sys_x86_64.c index dbebd5ccba6..cc7821c6885 100644 --- a/arch/x86_64/kernel/sys_x86_64.c +++ b/arch/x86_64/kernel/sys_x86_64.c @@ -68,13 +68,7 @@ out: static void find_start_end(unsigned long flags, unsigned long *begin, unsigned long *end) { -#ifdef CONFIG_IA32_EMULATION - if (test_thread_flag(TIF_IA32)) { - *begin = TASK_UNMAPPED_32; - *end = IA32_PAGE_OFFSET; - } else -#endif - if (flags & MAP_32BIT) { + if (!test_thread_flag(TIF_IA32) && (flags & MAP_32BIT)) { /* This is usually used needed to map code in small model, so it needs to be in the first 31bit. Limit it to that. This means we need to move the @@ -84,10 +78,10 @@ static void find_start_end(unsigned long flags, unsigned long *begin, of playground for now. -AK */ *begin = 0x40000000; *end = 0x80000000; - } else { - *begin = TASK_UNMAPPED_64; + } else { + *begin = TASK_UNMAPPED_BASE; *end = TASK_SIZE; - } + } } unsigned long @@ -111,6 +105,11 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, (!vma || addr + len <= vma->vm_start)) return addr; } + if (((flags & MAP_32BIT) || test_thread_flag(TIF_IA32)) + && len <= mm->cached_hole_size) { + mm->cached_hole_size = 0; + mm->free_area_cache = begin; + } addr = mm->free_area_cache; if (addr < begin) addr = begin; @@ -126,6 +125,7 @@ full_search: */ if (start_addr != begin) { start_addr = addr = begin; + mm->cached_hole_size = 0; goto full_search; } return -ENOMEM; @@ -137,6 +137,9 @@ full_search: mm->free_area_cache = addr + len; return addr; } + if (addr + mm->cached_hole_size < vma->vm_start) + mm->cached_hole_size = vma->vm_start - addr; + addr = vma->vm_end; } } diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 0e3b60e1ac5..fb8c809b4cd 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -26,6 +26,10 @@ #include <linux/sysdev.h> #include <linux/bcd.h> #include <linux/kallsyms.h> +#include <linux/acpi.h> +#ifdef CONFIG_ACPI +#include <acpi/achware.h> /* for PM timer frequency */ +#endif #include <asm/8253pit.h> #include <asm/pgtable.h> #include <asm/vsyscall.h> @@ -396,6 +400,10 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) (offset - vxtime.last)*(NSEC_PER_SEC/HZ) / hpet_tick; vxtime.last = offset; +#ifdef CONFIG_X86_PM_TIMER + } else if (vxtime.mode == VXTIME_PMTMR) { + lost = pmtimer_mark_offset(); +#endif } else { offset = (((tsc - vxtime.last_tsc) * vxtime.tsc_quot) >> 32) - (USEC_PER_SEC / HZ); @@ -898,6 +906,13 @@ void __init time_init(void) hpet_period; cpu_khz = hpet_calibrate_tsc(); timename = "HPET"; +#ifdef CONFIG_X86_PM_TIMER + } else if (pmtmr_ioport) { + vxtime_hz = PM_TIMER_FREQUENCY; + timename = "PM"; + pit_init(); + cpu_khz = pit_calibrate_tsc(); +#endif } else { pit_init(); cpu_khz = pit_calibrate_tsc(); @@ -923,35 +938,50 @@ void __init time_init(void) } /* + * Make an educated guess if the TSC is trustworthy and synchronized + * over all CPUs. + */ +static __init int unsynchronized_tsc(void) +{ +#ifdef CONFIG_SMP + if (oem_force_hpet_timer()) + return 1; + /* Intel systems are normally all synchronized. Exceptions + are handled in the OEM check above. */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) + return 0; + /* All in a single socket - should be synchronized */ + if (cpus_weight(cpu_core_map[0]) == num_online_cpus()) + return 0; +#endif + /* Assume multi socket systems are not synchronized */ + return num_online_cpus() > 1; +} + +/* * Decide after all CPUs are booted what mode gettimeofday should use. */ void __init time_init_gtod(void) { char *timetype; - /* - * AMD systems with more than one CPU don't have fully synchronized - * TSCs. Always use HPET gettimeofday for these, although it is slower. - * Intel SMP systems usually have synchronized TSCs, so use always - * the TSC. - * - * Exceptions: - * IBM Summit2 checked by oem_force_hpet_timer(). - * AMD dual core may also not need HPET. Check me. - * - * Can be turned off with "notsc". - */ - if (num_online_cpus() > 1 && - boot_cpu_data.x86_vendor == X86_VENDOR_AMD) - notsc = 1; - /* Some systems will want to disable TSC and use HPET. */ - if (oem_force_hpet_timer()) + if (unsynchronized_tsc()) notsc = 1; if (vxtime.hpet_address && notsc) { timetype = "HPET"; vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick; vxtime.mode = VXTIME_HPET; do_gettimeoffset = do_gettimeoffset_hpet; +#ifdef CONFIG_X86_PM_TIMER + /* Using PM for gettimeofday is quite slow, but we have no other + choice because the TSC is too unreliable on some systems. */ + } else if (pmtmr_ioport && !vxtime.hpet_address && notsc) { + timetype = "PM"; + do_gettimeoffset = do_gettimeoffset_pm; + vxtime.mode = VXTIME_PMTMR; + sysctl_vsyscall = 0; + printk(KERN_INFO "Disabling vsyscall due to use of PM timer\n"); +#endif } else { timetype = vxtime.hpet_address ? "HPET/TSC" : "PIT/TSC"; vxtime.mode = VXTIME_TSC; diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c index 65a37f52c56..3dfec8fdabc 100644 --- a/arch/x86_64/kernel/traps.c +++ b/arch/x86_64/kernel/traps.c @@ -332,10 +332,12 @@ void handle_BUG(struct pt_regs *regs) printk(KERN_ALERT "Kernel BUG at %.50s:%d\n", f.filename, f.line); } +#ifdef CONFIG_BUG void out_of_line_bug(void) { BUG(); } +#endif static DEFINE_SPINLOCK(die_lock); static int die_owner = -1; diff --git a/arch/x86_64/kernel/vsyscall.c b/arch/x86_64/kernel/vsyscall.c index b4b8dc59663..2e573442594 100644 --- a/arch/x86_64/kernel/vsyscall.c +++ b/arch/x86_64/kernel/vsyscall.c @@ -65,7 +65,7 @@ static force_inline void do_vgettimeofday(struct timeval * tv) usec = (__xtime.tv_nsec / 1000) + (__jiffies - __wall_jiffies) * (1000000 / HZ); - if (__vxtime.mode == VXTIME_TSC) { + if (__vxtime.mode != VXTIME_HPET) { sync_core(); rdtscll(t); if (t < __vxtime.last_tsc) @@ -217,8 +217,9 @@ static int __init vsyscall_init(void) BUG_ON((unsigned long) &vtime != VSYSCALL_ADDR(__NR_vtime)); BUG_ON((VSYSCALL_ADDR(0) != __fix_to_virt(VSYSCALL_FIRST_PAGE))); map_vsyscall(); - sysctl_vsyscall = 1; +#ifdef CONFIG_SYSCTL register_sysctl_table(kernel_root_table2, 0); +#endif return 0; } diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c index a43dedb58fa..68ec03070e5 100644 --- a/arch/x86_64/kernel/x8664_ksyms.c +++ b/arch/x86_64/kernel/x8664_ksyms.c @@ -193,8 +193,9 @@ EXPORT_SYMBOL(smp_num_siblings); extern void do_softirq_thunk(void); EXPORT_SYMBOL(do_softirq_thunk); -void out_of_line_bug(void); +#ifdef CONFIG_BUG EXPORT_SYMBOL(out_of_line_bug); +#endif EXPORT_SYMBOL(init_level4_pgt); diff --git a/arch/x86_64/lib/delay.c b/arch/x86_64/lib/delay.c index 6e2d66472eb..aed61a668a1 100644 --- a/arch/x86_64/lib/delay.c +++ b/arch/x86_64/lib/delay.c @@ -34,7 +34,7 @@ void __delay(unsigned long loops) inline void __const_udelay(unsigned long xloops) { - __delay(((xloops * cpu_data[_smp_processor_id()].loops_per_jiffy) >> 32) * HZ); + __delay(((xloops * cpu_data[raw_smp_processor_id()].loops_per_jiffy) >> 32) * HZ); } void __udelay(unsigned long usecs) diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c index e0330921676..57d3ab15a5c 100644 --- a/arch/x86_64/mm/fault.c +++ b/arch/x86_64/mm/fault.c @@ -234,6 +234,8 @@ static noinline void pgtable_bad(unsigned long address, struct pt_regs *regs, /* * Handle a fault on the vmalloc or module mapping area + * + * This assumes no large pages in there. */ static int vmalloc_fault(unsigned long address) { @@ -272,7 +274,10 @@ static int vmalloc_fault(unsigned long address) if (!pte_present(*pte_ref)) return -1; pte = pte_offset_kernel(pmd, address); - if (!pte_present(*pte) || pte_page(*pte) != pte_page(*pte_ref)) + /* Don't use pte_page here, because the mappings can point + outside mem_map, and the NUMA hash lookup cannot handle + that. */ + if (!pte_present(*pte) || pte_pfn(*pte) != pte_pfn(*pte_ref)) BUG(); __flush_tlb_all(); return 0; @@ -345,8 +350,10 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code) * (error_code & 4) == 0, and that the fault was not a * protection error (error_code & 1) == 0. */ - if (unlikely(address >= TASK_SIZE)) { - if (!(error_code & 5)) { + if (unlikely(address >= TASK_SIZE64)) { + if (!(error_code & 5) && + ((address >= VMALLOC_START && address < VMALLOC_END) || + (address >= MODULES_VADDR && address < MODULES_END))) { if (vmalloc_fault(address) < 0) goto bad_area_nosemaphore; return; diff --git a/arch/x86_64/mm/ioremap.c b/arch/x86_64/mm/ioremap.c index 74ec8554b19..58aac23760e 100644 --- a/arch/x86_64/mm/ioremap.c +++ b/arch/x86_64/mm/ioremap.c @@ -133,7 +133,7 @@ ioremap_change_attr(unsigned long phys_addr, unsigned long size, unsigned long flags) { int err = 0; - if (flags && phys_addr + size - 1 < (end_pfn_map << PAGE_SHIFT)) { + if (phys_addr + size - 1 < (end_pfn_map << PAGE_SHIFT)) { unsigned long npages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; unsigned long vaddr = (unsigned long) __va(phys_addr); @@ -214,7 +214,7 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l remove_vm_area((void *)(PAGE_MASK & (unsigned long) addr)); return NULL; } - if (ioremap_change_attr(phys_addr, size, flags) < 0) { + if (flags && ioremap_change_attr(phys_addr, size, flags) < 0) { area->flags &= 0xffffff; vunmap(addr); return NULL; @@ -251,7 +251,7 @@ void __iomem *ioremap_nocache (unsigned long phys_addr, unsigned long size) void iounmap(volatile void __iomem *addr) { - struct vm_struct *p, **pprev; + struct vm_struct *p; if (addr <= high_memory) return; @@ -260,24 +260,11 @@ void iounmap(volatile void __iomem *addr) return; write_lock(&vmlist_lock); - for (p = vmlist, pprev = &vmlist; p != NULL; pprev = &p->next, p = *pprev) - if (p->addr == (void *)(PAGE_MASK & (unsigned long)addr)) - break; - if (!p) { - printk("__iounmap: bad address %p\n", addr); - goto out_unlock; - } - *pprev = p->next; - unmap_vm_area(p); - if ((p->flags >> 20) && - p->phys_addr + p->size - 1 < virt_to_phys(high_memory)) { - /* p->size includes the guard page, but cpa doesn't like that */ - change_page_attr(virt_to_page(__va(p->phys_addr)), - p->size >> PAGE_SHIFT, - PAGE_KERNEL); - global_flush_tlb(); - } -out_unlock: + p = __remove_vm_area((void *)((unsigned long)addr & PAGE_MASK)); + if (!p) + printk("iounmap: bad address %p\n", addr); + else if (p->flags >> 20) + ioremap_change_attr(p->phys_addr, p->size, 0); write_unlock(&vmlist_lock); kfree(p); } |