summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/alpha/Kconfig1
-rw-r--r--arch/alpha/include/asm/atomic.h88
-rw-r--r--arch/alpha/include/asm/param.h8
-rw-r--r--arch/alpha/include/asm/spinlock.h4
-rw-r--r--arch/alpha/include/asm/unistd.h3
-rw-r--r--arch/alpha/include/uapi/asm/param.h7
-rw-r--r--arch/alpha/include/uapi/asm/unistd.h2
-rw-r--r--arch/alpha/kernel/entry.S399
-rw-r--r--arch/alpha/kernel/irq_alpha.c2
-rw-r--r--arch/alpha/kernel/smp.c5
-rw-r--r--arch/alpha/kernel/sys_dp264.c8
-rw-r--r--arch/alpha/kernel/sys_marvel.c3
-rw-r--r--arch/alpha/kernel/systbls.S2
-rw-r--r--arch/alpha/kernel/time.c4
-rw-r--r--arch/alpha/kernel/traps.c8
-rw-r--r--arch/arc/include/asm/entry.h1
-rw-r--r--arch/arm/Kconfig7
-rw-r--r--arch/arm/Kconfig.debug14
-rw-r--r--arch/arm/Makefile18
-rw-r--r--arch/arm/boot/dts/atlas6.dtsi22
-rw-r--r--arch/arm/boot/dts/imx28-apx4devkit.dts2
-rw-r--r--arch/arm/boot/dts/imx28-evk.dts2
-rw-r--r--arch/arm/boot/dts/imx28-m28evk.dts2
-rw-r--r--arch/arm/boot/dts/imx28.dtsi1
-rw-r--r--arch/arm/boot/dts/imx51-babbage.dts13
-rw-r--r--arch/arm/boot/dts/imx53-mba53.dts2
-rw-r--r--arch/arm/boot/dts/imx53.dtsi32
-rw-r--r--arch/arm/boot/dts/prima2.dtsi16
-rw-r--r--arch/arm/boot/dts/stih416-pinctrl.dtsi10
-rw-r--r--arch/arm/boot/dts/stih416.dtsi2
-rw-r--r--arch/arm/boot/dts/twl4030.dtsi6
-rw-r--r--arch/arm/boot/dts/vf610.dtsi8
-rw-r--r--arch/arm/common/edma.c1
-rw-r--r--arch/arm/configs/da8xx_omapl_defconfig2
-rw-r--r--arch/arm/configs/davinci_all_defconfig2
-rw-r--r--arch/arm/configs/multi_v7_defconfig6
-rw-r--r--arch/arm/configs/nhk8815_defconfig7
-rw-r--r--arch/arm/include/asm/a.out-core.h45
-rw-r--r--arch/arm/include/asm/cputype.h7
-rw-r--r--arch/arm/include/asm/elf.h6
-rw-r--r--arch/arm/include/asm/mmu.h3
-rw-r--r--arch/arm/include/asm/mmu_context.h20
-rw-r--r--arch/arm/include/asm/page.h2
-rw-r--r--arch/arm/include/asm/processor.h4
-rw-r--r--arch/arm/include/asm/thread_info.h1
-rw-r--r--arch/arm/include/asm/tlbflush.h16
-rw-r--r--arch/arm/include/asm/virt.h12
-rw-r--r--arch/arm/include/uapi/asm/Kbuild1
-rw-r--r--arch/arm/include/uapi/asm/a.out.h34
-rw-r--r--arch/arm/kernel/entry-armv.S103
-rw-r--r--arch/arm/kernel/entry-v7m.S2
-rw-r--r--arch/arm/kernel/fiq.c19
-rw-r--r--arch/arm/kernel/head-nommu.S1
-rw-r--r--arch/arm/kernel/head.S1
-rw-r--r--arch/arm/kernel/hyp-stub.S4
-rw-r--r--arch/arm/kernel/process.c49
-rw-r--r--arch/arm/kernel/setup.c3
-rw-r--r--arch/arm/kernel/signal.c56
-rw-r--r--arch/arm/kernel/signal.h12
-rw-r--r--arch/arm/kernel/smp_tlb.c17
-rw-r--r--arch/arm/kernel/traps.c46
-rw-r--r--arch/arm/kernel/vmlinux.lds.S17
-rw-r--r--arch/arm/mach-davinci/board-dm365-evm.c2
-rw-r--r--arch/arm/mach-davinci/dm355.c2
-rw-r--r--arch/arm/mach-davinci/dm365.c2
-rw-r--r--arch/arm/mach-exynos/Kconfig1
-rw-r--r--arch/arm/mach-exynos/Makefile2
-rw-r--r--arch/arm/mach-exynos/common.c26
-rw-r--r--arch/arm/mach-exynos/common.h1
-rw-r--r--arch/arm/mach-exynos/cpuidle.c1
-rw-r--r--arch/arm/mach-exynos/include/mach/memory.h5
-rw-r--r--arch/arm/mach-exynos/pm.c6
-rw-r--r--arch/arm/mach-footbridge/dc21285.c2
-rw-r--r--arch/arm/mach-highbank/highbank.c7
-rw-r--r--arch/arm/mach-imx/clk-imx6q.c5
-rw-r--r--arch/arm/mach-imx/clk-vf610.c2
-rw-r--r--arch/arm/mach-imx/mx27.h2
-rw-r--r--arch/arm/mach-keystone/keystone.c2
-rw-r--r--arch/arm/mach-omap2/Kconfig2
-rw-r--r--arch/arm/mach-omap2/board-generic.c23
-rw-r--r--arch/arm/mach-pxa/em-x270.c17
-rw-r--r--arch/arm/mach-pxa/mainstone.c3
-rw-r--r--arch/arm/mach-pxa/pcm990-baseboard.c3
-rw-r--r--arch/arm/mach-pxa/poodle.c4
-rw-r--r--arch/arm/mach-pxa/spitz.c4
-rw-r--r--arch/arm/mach-pxa/stargate2.c3
-rw-r--r--arch/arm/mach-s3c24xx/Kconfig2
-rw-r--r--arch/arm/mach-s3c24xx/clock-s3c2410.c161
-rw-r--r--arch/arm/mach-s3c24xx/clock-s3c2440.c3
-rw-r--r--arch/arm/mach-sti/Kconfig3
-rw-r--r--arch/arm/mach-zynq/common.c2
-rw-r--r--arch/arm/mm/Kconfig34
-rw-r--r--arch/arm/mm/context.c3
-rw-r--r--arch/arm/mm/mmu.c57
-rw-r--r--arch/arm/mm/proc-v7-2level.S2
-rw-r--r--arch/arm/mm/proc-v7-3level.S2
-rw-r--r--arch/arm/mm/proc-v7.S11
-rw-r--r--arch/arm/plat-samsung/Kconfig7
-rw-r--r--arch/arm/plat-samsung/Makefile2
-rw-r--r--arch/arm/plat-samsung/include/plat/clock.h5
-rw-r--r--arch/arm/plat-samsung/include/plat/pm.h8
-rw-r--r--arch/arm/plat-samsung/pm.c14
-rw-r--r--arch/arm/xen/enlighten.c2
-rw-r--r--arch/arm64/include/asm/debug-monitors.h7
-rw-r--r--arch/arm64/include/asm/system_misc.h3
-rw-r--r--arch/arm64/include/asm/thread_info.h4
-rw-r--r--arch/arm64/include/asm/virt.h13
-rw-r--r--arch/arm64/kernel/entry.S2
-rw-r--r--arch/arm64/kernel/process.c4
-rw-r--r--arch/arm64/kernel/smp.c15
-rw-r--r--arch/arm64/mm/fault.c46
-rw-r--r--arch/ia64/configs/generic_defconfig2
-rw-r--r--arch/ia64/configs/gensparse_defconfig2
-rw-r--r--arch/ia64/configs/tiger_defconfig2
-rw-r--r--arch/ia64/configs/xen_domu_defconfig2
-rw-r--r--arch/mips/Kconfig2
-rw-r--r--arch/mips/bcm47xx/Kconfig1
-rw-r--r--arch/mips/cavium-octeon/octeon-platform.c5
-rw-r--r--arch/mips/include/asm/mach-generic/spaces.h4
-rw-r--r--arch/mips/include/uapi/asm/siginfo.h7
-rw-r--r--arch/mips/kernel/bmips_vec.S6
-rw-r--r--arch/mips/kernel/smp-bmips.c20
-rw-r--r--arch/mips/kernel/traps.c1
-rw-r--r--arch/mips/kvm/Kconfig1
-rw-r--r--arch/mips/mm/tlbex.c4
-rw-r--r--arch/mips/netlogic/common/irq.c68
-rw-r--r--arch/mips/netlogic/dts/xlp_evp.dts3
-rw-r--r--arch/mips/netlogic/dts/xlp_svp.dts3
-rw-r--r--arch/mips/netlogic/xlp/usb-init.c2
-rw-r--r--arch/mips/powertv/asic/asic_devices.c3
-rw-r--r--arch/parisc/configs/c8000_defconfig279
-rw-r--r--arch/parisc/include/asm/parisc-device.h3
-rw-r--r--arch/parisc/kernel/cache.c135
-rw-r--r--arch/parisc/kernel/inventory.c1
-rw-r--r--arch/parisc/kernel/signal.c7
-rw-r--r--arch/parisc/kernel/signal32.c1
-rw-r--r--arch/parisc/kernel/sys32.h36
-rw-r--r--arch/parisc/kernel/sys_parisc32.c2
-rw-r--r--arch/powerpc/configs/ppc64_defconfig2
-rw-r--r--arch/powerpc/configs/ppc64e_defconfig2
-rw-r--r--arch/powerpc/configs/pseries_defconfig2
-rw-r--r--arch/powerpc/include/asm/eeh.h30
-rw-r--r--arch/powerpc/include/asm/hw_irq.h7
-rw-r--r--arch/powerpc/include/asm/module.h5
-rw-r--r--arch/powerpc/include/asm/pci-bridge.h1
-rw-r--r--arch/powerpc/include/asm/perf_event_server.h6
-rw-r--r--arch/powerpc/include/asm/reg.h3
-rw-r--r--arch/powerpc/include/asm/smp.h4
-rw-r--r--arch/powerpc/include/uapi/asm/Kbuild1
-rw-r--r--arch/powerpc/include/uapi/asm/perf_event.h18
-rw-r--r--arch/powerpc/kernel/cputable.c20
-rw-r--r--arch/powerpc/kernel/eeh.c70
-rw-r--r--arch/powerpc/kernel/eeh_cache.c18
-rw-r--r--arch/powerpc/kernel/eeh_driver.c77
-rw-r--r--arch/powerpc/kernel/eeh_pe.c58
-rw-r--r--arch/powerpc/kernel/eeh_sysfs.c21
-rw-r--r--arch/powerpc/kernel/irq.c2
-rw-r--r--arch/powerpc/kernel/pci-common.c2
-rw-r--r--arch/powerpc/kernel/pci-hotplug.c49
-rw-r--r--arch/powerpc/kernel/pci_of_scan.c56
-rw-r--r--arch/powerpc/kernel/prom_init.c5
-rw-r--r--arch/powerpc/kernel/vmlinux.lds.S3
-rw-r--r--arch/powerpc/mm/hash_native_64.c12
-rw-r--r--arch/powerpc/mm/numa.c59
-rw-r--r--arch/powerpc/perf/core-book3s.c7
-rw-r--r--arch/powerpc/perf/power8-pmu.c30
-rw-r--r--arch/powerpc/platforms/powernv/eeh-powernv.c17
-rw-r--r--arch/powerpc/platforms/powernv/pci-ioda.c2
-rw-r--r--arch/powerpc/platforms/pseries/Kconfig1
-rw-r--r--arch/powerpc/platforms/pseries/eeh_pseries.c67
-rw-r--r--arch/powerpc/platforms/pseries/lpar.c2
-rw-r--r--arch/powerpc/platforms/pseries/ras.c3
-rw-r--r--arch/s390/include/asm/processor.h10
-rw-r--r--arch/s390/include/asm/switch_to.h4
-rw-r--r--arch/s390/include/uapi/asm/ptrace.h1
-rw-r--r--arch/s390/kernel/crash_dump.c51
-rw-r--r--arch/s390/kernel/ptrace.c50
-rw-r--r--arch/s390/net/bpf_jit_comp.c113
-rw-r--r--arch/sh/configs/sh03_defconfig2
-rw-r--r--arch/um/include/shared/frame_kern.h8
-rw-r--r--arch/um/kernel/signal.c4
-rw-r--r--arch/um/kernel/skas/mmu.c2
-rw-r--r--arch/um/kernel/skas/uaccess.c2
-rw-r--r--arch/um/os-Linux/mem.c230
-rw-r--r--arch/um/os-Linux/signal.c8
-rw-r--r--arch/um/os-Linux/skas/process.c19
-rw-r--r--arch/x86/crypto/Makefile2
-rw-r--r--arch/x86/crypto/crct10dif-pcl-asm_64.S643
-rw-r--r--arch/x86/crypto/crct10dif-pclmul_glue.c151
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce-severity.c4
-rw-r--r--arch/x86/kvm/mmu.c7
-rw-r--r--arch/x86/platform/ce4100/ce4100.c1
-rw-r--r--arch/x86/um/signal.c1
193 files changed, 2432 insertions, 1885 deletions
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 837a1f2d8b9..082d9b4b547 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -15,6 +15,7 @@ config ALPHA
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARCH_WANT_IPC_PARSE_VERSION
select ARCH_HAVE_NMI_SAFE_CMPXCHG
+ select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select GENERIC_SMP_IDLE_THREAD
select GENERIC_CMOS_UPDATE
select GENERIC_STRNCPY_FROM_USER
diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h
index c2cbe4fc391..78b03ef39f6 100644
--- a/arch/alpha/include/asm/atomic.h
+++ b/arch/alpha/include/asm/atomic.h
@@ -186,17 +186,24 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
*/
static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
{
- int c, old;
- c = atomic_read(v);
- for (;;) {
- if (unlikely(c == (u)))
- break;
- old = atomic_cmpxchg((v), c, c + (a));
- if (likely(old == c))
- break;
- c = old;
- }
- return c;
+ int c, new, old;
+ smp_mb();
+ __asm__ __volatile__(
+ "1: ldl_l %[old],%[mem]\n"
+ " cmpeq %[old],%[u],%[c]\n"
+ " addl %[old],%[a],%[new]\n"
+ " bne %[c],2f\n"
+ " stl_c %[new],%[mem]\n"
+ " beq %[new],3f\n"
+ "2:\n"
+ ".subsection 2\n"
+ "3: br 1b\n"
+ ".previous"
+ : [old] "=&r"(old), [new] "=&r"(new), [c] "=&r"(c)
+ : [mem] "m"(*v), [a] "rI"(a), [u] "rI"((long)u)
+ : "memory");
+ smp_mb();
+ return old;
}
@@ -207,21 +214,56 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
* @u: ...unless v is equal to u.
*
* Atomically adds @a to @v, so long as it was not @u.
- * Returns the old value of @v.
+ * Returns true iff @v was not @u.
*/
static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
{
- long c, old;
- c = atomic64_read(v);
- for (;;) {
- if (unlikely(c == (u)))
- break;
- old = atomic64_cmpxchg((v), c, c + (a));
- if (likely(old == c))
- break;
- c = old;
- }
- return c != (u);
+ long c, tmp;
+ smp_mb();
+ __asm__ __volatile__(
+ "1: ldq_l %[tmp],%[mem]\n"
+ " cmpeq %[tmp],%[u],%[c]\n"
+ " addq %[tmp],%[a],%[tmp]\n"
+ " bne %[c],2f\n"
+ " stq_c %[tmp],%[mem]\n"
+ " beq %[tmp],3f\n"
+ "2:\n"
+ ".subsection 2\n"
+ "3: br 1b\n"
+ ".previous"
+ : [tmp] "=&r"(tmp), [c] "=&r"(c)
+ : [mem] "m"(*v), [a] "rI"(a), [u] "rI"(u)
+ : "memory");
+ smp_mb();
+ return !c;
+}
+
+/*
+ * atomic64_dec_if_positive - decrement by 1 if old value positive
+ * @v: pointer of type atomic_t
+ *
+ * The function returns the old value of *v minus 1, even if
+ * the atomic variable, v, was not decremented.
+ */
+static inline long atomic64_dec_if_positive(atomic64_t *v)
+{
+ long old, tmp;
+ smp_mb();
+ __asm__ __volatile__(
+ "1: ldq_l %[old],%[mem]\n"
+ " subq %[old],1,%[tmp]\n"
+ " ble %[old],2f\n"
+ " stq_c %[tmp],%[mem]\n"
+ " beq %[tmp],3f\n"
+ "2:\n"
+ ".subsection 2\n"
+ "3: br 1b\n"
+ ".previous"
+ : [old] "=&r"(old), [tmp] "=&r"(tmp)
+ : [mem] "m"(*v)
+ : "memory");
+ smp_mb();
+ return old - 1;
}
#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
diff --git a/arch/alpha/include/asm/param.h b/arch/alpha/include/asm/param.h
index bf46af51941..a5b68b268bc 100644
--- a/arch/alpha/include/asm/param.h
+++ b/arch/alpha/include/asm/param.h
@@ -3,7 +3,9 @@
#include <uapi/asm/param.h>
-#define HZ CONFIG_HZ
-#define USER_HZ HZ
-# define CLOCKS_PER_SEC HZ /* frequency at which times() counts */
+# undef HZ
+# define HZ CONFIG_HZ
+# define USER_HZ 1024
+# define CLOCKS_PER_SEC USER_HZ /* frequency at which times() counts */
+
#endif /* _ASM_ALPHA_PARAM_H */
diff --git a/arch/alpha/include/asm/spinlock.h b/arch/alpha/include/asm/spinlock.h
index 3bba21e41b8..37b570d0120 100644
--- a/arch/alpha/include/asm/spinlock.h
+++ b/arch/alpha/include/asm/spinlock.h
@@ -168,8 +168,4 @@ static inline void arch_write_unlock(arch_rwlock_t * lock)
#define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
#define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
-#define arch_spin_relax(lock) cpu_relax()
-#define arch_read_relax(lock) cpu_relax()
-#define arch_write_relax(lock) cpu_relax()
-
#endif /* _ALPHA_SPINLOCK_H */
diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h
index 43baee17acd..f2c94402e2c 100644
--- a/arch/alpha/include/asm/unistd.h
+++ b/arch/alpha/include/asm/unistd.h
@@ -3,8 +3,7 @@
#include <uapi/asm/unistd.h>
-
-#define NR_SYSCALLS 506
+#define NR_SYSCALLS 508
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_STAT64
diff --git a/arch/alpha/include/uapi/asm/param.h b/arch/alpha/include/uapi/asm/param.h
index 29daed819eb..dbcd9834af6 100644
--- a/arch/alpha/include/uapi/asm/param.h
+++ b/arch/alpha/include/uapi/asm/param.h
@@ -1,13 +1,7 @@
#ifndef _UAPI_ASM_ALPHA_PARAM_H
#define _UAPI_ASM_ALPHA_PARAM_H
-/* ??? Gross. I don't want to parameterize this, and supposedly the
- hardware ignores reprogramming. We also need userland buy-in to the
- change in HZ, since this is visible in the wait4 resources etc. */
-
-#ifndef __KERNEL__
#define HZ 1024
-#endif
#define EXEC_PAGESIZE 8192
@@ -17,5 +11,4 @@
#define MAXHOSTNAMELEN 64 /* max length of hostname */
-
#endif /* _UAPI_ASM_ALPHA_PARAM_H */
diff --git a/arch/alpha/include/uapi/asm/unistd.h b/arch/alpha/include/uapi/asm/unistd.h
index 801d28bcea5..53ae7bb1bfd 100644
--- a/arch/alpha/include/uapi/asm/unistd.h
+++ b/arch/alpha/include/uapi/asm/unistd.h
@@ -467,5 +467,7 @@
#define __NR_sendmmsg 503
#define __NR_process_vm_readv 504
#define __NR_process_vm_writev 505
+#define __NR_kcmp 506
+#define __NR_finit_module 507
#endif /* _UAPI_ALPHA_UNISTD_H */
diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
index f62a994ef12..a969b95ee5a 100644
--- a/arch/alpha/kernel/entry.S
+++ b/arch/alpha/kernel/entry.S
@@ -12,11 +12,32 @@
.text
.set noat
+ .cfi_sections .debug_frame
/* Stack offsets. */
#define SP_OFF 184
#define SWITCH_STACK_SIZE 320
+.macro CFI_START_OSF_FRAME func
+ .align 4
+ .globl \func
+ .type \func,@function
+\func:
+ .cfi_startproc simple
+ .cfi_return_column 64
+ .cfi_def_cfa $sp, 48
+ .cfi_rel_offset 64, 8
+ .cfi_rel_offset $gp, 16
+ .cfi_rel_offset $16, 24
+ .cfi_rel_offset $17, 32
+ .cfi_rel_offset $18, 40
+.endm
+
+.macro CFI_END_OSF_FRAME func
+ .cfi_endproc
+ .size \func, . - \func
+.endm
+
/*
* This defines the normal kernel pt-regs layout.
*
@@ -27,100 +48,158 @@
* the palcode-provided values are available to the signal handler.
*/
-#define SAVE_ALL \
- subq $sp, SP_OFF, $sp; \
- stq $0, 0($sp); \
- stq $1, 8($sp); \
- stq $2, 16($sp); \
- stq $3, 24($sp); \
- stq $4, 32($sp); \
- stq $28, 144($sp); \
- lda $2, alpha_mv; \
- stq $5, 40($sp); \
- stq $6, 48($sp); \
- stq $7, 56($sp); \
- stq $8, 64($sp); \
- stq $19, 72($sp); \
- stq $20, 80($sp); \
- stq $21, 88($sp); \
- ldq $2, HAE_CACHE($2); \
- stq $22, 96($sp); \
- stq $23, 104($sp); \
- stq $24, 112($sp); \
- stq $25, 120($sp); \
- stq $26, 128($sp); \
- stq $27, 136($sp); \
- stq $2, 152($sp); \
- stq $16, 160($sp); \
- stq $17, 168($sp); \
+.macro SAVE_ALL
+ subq $sp, SP_OFF, $sp
+ .cfi_adjust_cfa_offset SP_OFF
+ stq $0, 0($sp)
+ stq $1, 8($sp)
+ stq $2, 16($sp)
+ stq $3, 24($sp)
+ stq $4, 32($sp)
+ stq $28, 144($sp)
+ .cfi_rel_offset $0, 0
+ .cfi_rel_offset $1, 8
+ .cfi_rel_offset $2, 16
+ .cfi_rel_offset $3, 24
+ .cfi_rel_offset $4, 32
+ .cfi_rel_offset $28, 144
+ lda $2, alpha_mv
+ stq $5, 40($sp)
+ stq $6, 48($sp)
+ stq $7, 56($sp)
+ stq $8, 64($sp)
+ stq $19, 72($sp)
+ stq $20, 80($sp)
+ stq $21, 88($sp)
+ ldq $2, HAE_CACHE($2)
+ stq $22, 96($sp)
+ stq $23, 104($sp)
+ stq $24, 112($sp)
+ stq $25, 120($sp)
+ stq $26, 128($sp)
+ stq $27, 136($sp)
+ stq $2, 152($sp)
+ stq $16, 160($sp)
+ stq $17, 168($sp)
stq $18, 176($sp)
+ .cfi_rel_offset $5, 40
+ .cfi_rel_offset $6, 48
+ .cfi_rel_offset $7, 56
+ .cfi_rel_offset $8, 64
+ .cfi_rel_offset $19, 72
+ .cfi_rel_offset $20, 80
+ .cfi_rel_offset $21, 88
+ .cfi_rel_offset $22, 96
+ .cfi_rel_offset $23, 104
+ .cfi_rel_offset $24, 112
+ .cfi_rel_offset $25, 120
+ .cfi_rel_offset $26, 128
+ .cfi_rel_offset $27, 136
+.endm
-#define RESTORE_ALL \
- lda $19, alpha_mv; \
- ldq $0, 0($sp); \
- ldq $1, 8($sp); \
- ldq $2, 16($sp); \
- ldq $3, 24($sp); \
- ldq $21, 152($sp); \
- ldq $20, HAE_CACHE($19); \
- ldq $4, 32($sp); \
- ldq $5, 40($sp); \
- ldq $6, 48($sp); \
- ldq $7, 56($sp); \
- subq $20, $21, $20; \
- ldq $8, 64($sp); \
- beq $20, 99f; \
- ldq $20, HAE_REG($19); \
- stq $21, HAE_CACHE($19); \
- stq $21, 0($20); \
-99:; \
- ldq $19, 72($sp); \
- ldq $20, 80($sp); \
- ldq $21, 88($sp); \
- ldq $22, 96($sp); \
- ldq $23, 104($sp); \
- ldq $24, 112($sp); \
- ldq $25, 120($sp); \
- ldq $26, 128($sp); \
- ldq $27, 136($sp); \
- ldq $28, 144($sp); \
+.macro RESTORE_ALL
+ lda $19, alpha_mv
+ ldq $0, 0($sp)
+ ldq $1, 8($sp)
+ ldq $2, 16($sp)
+ ldq $3, 24($sp)
+ ldq $21, 152($sp)
+ ldq $20, HAE_CACHE($19)
+ ldq $4, 32($sp)
+ ldq $5, 40($sp)
+ ldq $6, 48($sp)
+ ldq $7, 56($sp)
+ subq $20, $21, $20
+ ldq $8, 64($sp)
+ beq $20, 99f
+ ldq $20, HAE_REG($19)
+ stq $21, HAE_CACHE($19)
+ stq $21, 0($20)
+99: ldq $19, 72($sp)
+ ldq $20, 80($sp)
+ ldq $21, 88($sp)
+ ldq $22, 96($sp)
+ ldq $23, 104($sp)
+ ldq $24, 112($sp)
+ ldq $25, 120($sp)
+ ldq $26, 128($sp)
+ ldq $27, 136($sp)
+ ldq $28, 144($sp)
addq $sp, SP_OFF, $sp
+ .cfi_restore $0
+ .cfi_restore $1
+ .cfi_restore $2
+ .cfi_restore $3
+ .cfi_restore $4
+ .cfi_restore $5
+ .cfi_restore $6
+ .cfi_restore $7
+ .cfi_restore $8
+ .cfi_restore $19
+ .cfi_restore $20
+ .cfi_restore $21
+ .cfi_restore $22
+ .cfi_restore $23
+ .cfi_restore $24
+ .cfi_restore $25
+ .cfi_restore $26
+ .cfi_restore $27
+ .cfi_restore $28
+ .cfi_adjust_cfa_offset -SP_OFF
+.endm
+
+.macro DO_SWITCH_STACK
+ bsr $1, do_switch_stack
+ .cfi_adjust_cfa_offset SWITCH_STACK_SIZE
+ .cfi_rel_offset $9, 0
+ .cfi_rel_offset $10, 8
+ .cfi_rel_offset $11, 16
+ .cfi_rel_offset $12, 24
+ .cfi_rel_offset $13, 32
+ .cfi_rel_offset $14, 40
+ .cfi_rel_offset $15, 48
+ /* We don't really care about the FP registers for debugging. */
+.endm
+
+.macro UNDO_SWITCH_STACK
+ bsr $1, undo_switch_stack
+ .cfi_restore $9
+ .cfi_restore $10
+ .cfi_restore $11
+ .cfi_restore $12
+ .cfi_restore $13
+ .cfi_restore $14
+ .cfi_restore $15
+ .cfi_adjust_cfa_offset -SWITCH_STACK_SIZE
+.endm
/*
* Non-syscall kernel entry points.
*/
- .align 4
- .globl entInt
- .ent entInt
-entInt:
+CFI_START_OSF_FRAME entInt
SAVE_ALL
lda $8, 0x3fff
lda $26, ret_from_sys_call
bic $sp, $8, $8
mov $sp, $19
jsr $31, do_entInt
-.end entInt
+CFI_END_OSF_FRAME entInt
- .align 4
- .globl entArith
- .ent entArith
-entArith:
+CFI_START_OSF_FRAME entArith
SAVE_ALL
lda $8, 0x3fff
lda $26, ret_from_sys_call
bic $sp, $8, $8
mov $sp, $18
jsr $31, do_entArith
-.end entArith
+CFI_END_OSF_FRAME entArith
- .align 4
- .globl entMM
- .ent entMM
-entMM:
+CFI_START_OSF_FRAME entMM
SAVE_ALL
/* save $9 - $15 so the inline exception code can manipulate them. */
subq $sp, 56, $sp
+ .cfi_adjust_cfa_offset 56
stq $9, 0($sp)
stq $10, 8($sp)
stq $11, 16($sp)
@@ -128,6 +207,13 @@ entMM:
stq $13, 32($sp)
stq $14, 40($sp)
stq $15, 48($sp)
+ .cfi_rel_offset $9, 0
+ .cfi_rel_offset $10, 8
+ .cfi_rel_offset $11, 16
+ .cfi_rel_offset $12, 24
+ .cfi_rel_offset $13, 32
+ .cfi_rel_offset $14, 40
+ .cfi_rel_offset $15, 48
addq $sp, 56, $19
/* handle the fault */
lda $8, 0x3fff
@@ -142,28 +228,33 @@ entMM:
ldq $14, 40($sp)
ldq $15, 48($sp)
addq $sp, 56, $sp
+ .cfi_restore $9
+ .cfi_restore $10
+ .cfi_restore $11
+ .cfi_restore $12
+ .cfi_restore $13
+ .cfi_restore $14
+ .cfi_restore $15
+ .cfi_adjust_cfa_offset -56
/* finish up the syscall as normal. */
br ret_from_sys_call
-.end entMM
+CFI_END_OSF_FRAME entMM
- .align 4
- .globl entIF
- .ent entIF
-entIF:
+CFI_START_OSF_FRAME entIF
SAVE_ALL
lda $8, 0x3fff
lda $26, ret_from_sys_call
bic $sp, $8, $8
mov $sp, $17
jsr $31, do_entIF
-.end entIF
+CFI_END_OSF_FRAME entIF
- .align 4
- .globl entUna
- .ent entUna
-entUna:
+CFI_START_OSF_FRAME entUna
lda $sp, -256($sp)
+ .cfi_adjust_cfa_offset 256
stq $0, 0($sp)
+ .cfi_rel_offset $0, 0
+ .cfi_remember_state
ldq $0, 256($sp) /* get PS */
stq $1, 8($sp)
stq $2, 16($sp)
@@ -195,6 +286,32 @@ entUna:
stq $28, 224($sp)
mov $sp, $19
stq $gp, 232($sp)
+ .cfi_rel_offset $1, 1*8
+ .cfi_rel_offset $2, 2*8
+ .cfi_rel_offset $3, 3*8
+ .cfi_rel_offset $4, 4*8
+ .cfi_rel_offset $5, 5*8
+ .cfi_rel_offset $6, 6*8
+ .cfi_rel_offset $7, 7*8
+ .cfi_rel_offset $8, 8*8
+ .cfi_rel_offset $9, 9*8
+ .cfi_rel_offset $10, 10*8
+ .cfi_rel_offset $11, 11*8
+ .cfi_rel_offset $12, 12*8
+ .cfi_rel_offset $13, 13*8
+ .cfi_rel_offset $14, 14*8
+ .cfi_rel_offset $15, 15*8
+ .cfi_rel_offset $19, 19*8
+ .cfi_rel_offset $20, 20*8
+ .cfi_rel_offset $21, 21*8
+ .cfi_rel_offset $22, 22*8
+ .cfi_rel_offset $23, 23*8
+ .cfi_rel_offset $24, 24*8
+ .cfi_rel_offset $25, 25*8
+ .cfi_rel_offset $26, 26*8
+ .cfi_rel_offset $27, 27*8
+ .cfi_rel_offset $28, 28*8
+ .cfi_rel_offset $29, 29*8
lda $8, 0x3fff
stq $31, 248($sp)
bic $sp, $8, $8
@@ -228,16 +345,45 @@ entUna:
ldq $28, 224($sp)
ldq $gp, 232($sp)
lda $sp, 256($sp)
+ .cfi_restore $1
+ .cfi_restore $2
+ .cfi_restore $3
+ .cfi_restore $4
+ .cfi_restore $5
+ .cfi_restore $6
+ .cfi_restore $7
+ .cfi_restore $8
+ .cfi_restore $9
+ .cfi_restore $10
+ .cfi_restore $11
+ .cfi_restore $12
+ .cfi_restore $13
+ .cfi_restore $14
+ .cfi_restore $15
+ .cfi_restore $19
+ .cfi_restore $20
+ .cfi_restore $21
+ .cfi_restore $22
+ .cfi_restore $23
+ .cfi_restore $24
+ .cfi_restore $25
+ .cfi_restore $26
+ .cfi_restore $27
+ .cfi_restore $28
+ .cfi_restore $29
+ .cfi_adjust_cfa_offset -256
call_pal PAL_rti
-.end entUna
.align 4
- .ent entUnaUser
entUnaUser:
+ .cfi_restore_state
ldq $0, 0($sp) /* restore original $0 */
lda $sp, 256($sp) /* pop entUna's stack frame */
+ .cfi_restore $0
+ .cfi_adjust_cfa_offset -256
SAVE_ALL /* setup normal kernel stack */
lda $sp, -56($sp)
+ .cfi_adjust_cfa_offset 56
stq $9, 0($sp)
stq $10, 8($sp)
stq $11, 16($sp)
@@ -245,6 +391,13 @@ entUnaUser:
stq $13, 32($sp)
stq $14, 40($sp)
stq $15, 48($sp)
+ .cfi_rel_offset $9, 0
+ .cfi_rel_offset $10, 8
+ .cfi_rel_offset $11, 16
+ .cfi_rel_offset $12, 24
+ .cfi_rel_offset $13, 32
+ .cfi_rel_offset $14, 40
+ .cfi_rel_offset $15, 48
lda $8, 0x3fff
addq $sp, 56, $19
bic $sp, $8, $8
@@ -257,20 +410,25 @@ entUnaUser:
ldq $14, 40($sp)
ldq $15, 48($sp)
lda $sp, 56($sp)
+ .cfi_restore $9
+ .cfi_restore $10
+ .cfi_restore $11
+ .cfi_restore $12
+ .cfi_restore $13
+ .cfi_restore $14
+ .cfi_restore $15
+ .cfi_adjust_cfa_offset -56
br ret_from_sys_call
-.end entUnaUser
+CFI_END_OSF_FRAME entUna
- .align 4
- .globl entDbg
- .ent entDbg
-entDbg:
+CFI_START_OSF_FRAME entDbg
SAVE_ALL
lda $8, 0x3fff
lda $26, ret_from_sys_call
bic $sp, $8, $8
mov $sp, $16
jsr $31, do_entDbg
-.end entDbg
+CFI_END_OSF_FRAME entDbg
/*
* The system call entry point is special. Most importantly, it looks
@@ -285,8 +443,12 @@ entDbg:
.align 4
.globl entSys
- .globl ret_from_sys_call
- .ent entSys
+ .type entSys, @function
+ .cfi_startproc simple
+ .cfi_return_column 64
+ .cfi_def_cfa $sp, 48
+ .cfi_rel_offset 64, 8
+ .cfi_rel_offset $gp, 16
entSys:
SAVE_ALL
lda $8, 0x3fff
@@ -300,6 +462,9 @@ entSys:
stq $17, SP_OFF+32($sp)
s8addq $0, $5, $5
stq $18, SP_OFF+40($sp)
+ .cfi_rel_offset $16, SP_OFF+24
+ .cfi_rel_offset $17, SP_OFF+32
+ .cfi_rel_offset $18, SP_OFF+40
blbs $3, strace
beq $4, 1f
ldq $27, 0($5)
@@ -310,6 +475,7 @@ entSys:
stq $31, 72($sp) /* a3=0 => no error */
.align 4
+ .globl ret_from_sys_call
ret_from_sys_call:
cmovne $26, 0, $18 /* $18 = 0 => non-restartable */
ldq $0, SP_OFF($sp)
@@ -324,10 +490,12 @@ ret_to_user:
and $17, _TIF_WORK_MASK, $2
bne $2, work_pending
restore_all:
+ .cfi_remember_state
RESTORE_ALL
call_pal PAL_rti
ret_to_kernel:
+ .cfi_restore_state
lda $16, 7
call_pal PAL_swpipl
br restore_all
@@ -356,7 +524,6 @@ $ret_success:
stq $0, 0($sp)
stq $31, 72($sp) /* a3=0 => no error */
br ret_from_sys_call
-.end entSys
/*
* Do all cleanup when returning from all interrupts and system calls.
@@ -370,7 +537,7 @@ $ret_success:
*/
.align 4
- .ent work_pending
+ .type work_pending, @function
work_pending:
and $17, _TIF_NOTIFY_RESUME | _TIF_SIGPENDING, $2
bne $2, $work_notifysig
@@ -387,23 +554,22 @@ $work_resched:
$work_notifysig:
mov $sp, $16
- bsr $1, do_switch_stack
+ DO_SWITCH_STACK
jsr $26, do_work_pending
- bsr $1, undo_switch_stack
+ UNDO_SWITCH_STACK
br restore_all
-.end work_pending
/*
* PTRACE syscall handler
*/
.align 4
- .ent strace
+ .type strace, @function
strace:
/* set up signal stack, call syscall_trace */
- bsr $1, do_switch_stack
+ DO_SWITCH_STACK
jsr $26, syscall_trace_enter /* returns the syscall number */
- bsr $1, undo_switch_stack
+ UNDO_SWITCH_STACK
/* get the arguments back.. */
ldq $16, SP_OFF+24($sp)
@@ -431,9 +597,9 @@ ret_from_straced:
$strace_success:
stq $0, 0($sp) /* save return value */
- bsr $1, do_switch_stack
+ DO_SWITCH_STACK
jsr $26, syscall_trace_leave
- bsr $1, undo_switch_stack
+ UNDO_SWITCH_STACK
br $31, ret_from_sys_call
.align 3
@@ -447,26 +613,31 @@ $strace_error:
stq $0, 0($sp)
stq $1, 72($sp) /* a3 for return */
- bsr $1, do_switch_stack
+ DO_SWITCH_STACK
mov $18, $9 /* save old syscall number */
mov $19, $10 /* save old a3 */
jsr $26, syscall_trace_leave
mov $9, $18
mov $10, $19
- bsr $1, undo_switch_stack
+ UNDO_SWITCH_STACK
mov $31, $26 /* tell "ret_from_sys_call" we can restart */
br ret_from_sys_call
-.end strace
+CFI_END_OSF_FRAME entSys
/*
* Save and restore the switch stack -- aka the balance of the user context.
*/
.align 4
- .ent do_switch_stack
+ .type do_switch_stack, @function
+ .cfi_startproc simple
+ .cfi_return_column 64
+ .cfi_def_cfa $sp, 0
+ .cfi_register 64, $1
do_switch_stack:
lda $sp, -SWITCH_STACK_SIZE($sp)
+ .cfi_adjust_cfa_offset SWITCH_STACK_SIZE
stq $9, 0($sp)
stq $10, 8($sp)
stq $11, 16($sp)
@@ -510,10 +681,14 @@ do_switch_stack:
stt $f0, 312($sp) # save fpcr in slot of $f31
ldt $f0, 64($sp) # dont let "do_switch_stack" change fp state.
ret $31, ($1), 1
-.end do_switch_stack
+ .cfi_endproc
+ .size do_switch_stack, .-do_switch_stack
.align 4
- .ent undo_switch_stack
+ .type undo_switch_stack, @function
+ .cfi_startproc simple
+ .cfi_def_cfa $sp, 0
+ .cfi_register 64, $1
undo_switch_stack:
ldq $9, 0($sp)
ldq $10, 8($sp)
@@ -558,7 +733,8 @@ undo_switch_stack:
ldt $f30, 304($sp)
lda $sp, SWITCH_STACK_SIZE($sp)
ret $31, ($1), 1
-.end undo_switch_stack
+ .cfi_endproc
+ .size undo_switch_stack, .-undo_switch_stack
/*
* The meat of the context switch code.
@@ -566,17 +742,18 @@ undo_switch_stack:
.align 4
.globl alpha_switch_to
- .ent alpha_switch_to
+ .type alpha_switch_to, @function
+ .cfi_startproc
alpha_switch_to:
- .prologue 0
- bsr $1, do_switch_stack
+ DO_SWITCH_STACK
call_pal PAL_swpctx
lda $8, 0x3fff
- bsr $1, undo_switch_stack
+ UNDO_SWITCH_STACK
bic $sp, $8, $8
mov $17, $0
ret
-.end alpha_switch_to
+ .cfi_endproc
+ .size alpha_switch_to, .-alpha_switch_to
/*
* New processes begin life here.
diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c
index f433fc11877..28e4429596f 100644
--- a/arch/alpha/kernel/irq_alpha.c
+++ b/arch/alpha/kernel/irq_alpha.c
@@ -236,7 +236,7 @@ void __init
init_rtc_irq(void)
{
irq_set_chip_and_handler_name(RTC_IRQ, &dummy_irq_chip,
- handle_simple_irq, "RTC");
+ handle_percpu_irq, "RTC");
setup_irq(RTC_IRQ, &timer_irqaction);
}
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index 53b18a620e1..9dbbcb3b914 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -264,9 +264,10 @@ recv_secondary_console_msg(void)
if (cnt <= 0 || cnt >= 80)
strcpy(buf, "<<< BOGUS MSG >>>");
else {
- cp1 = (char *) &cpu->ipc_buffer[11];
+ cp1 = (char *) &cpu->ipc_buffer[1];
cp2 = buf;
- strcpy(cp2, cp1);
+ memcpy(cp2, cp1, cnt);
+ cp2[cnt] = '\0';
while ((cp2 = strchr(cp2, '\r')) != 0) {
*cp2 = ' ';
diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c
index 5bf401f7ea9..6c35159bc00 100644
--- a/arch/alpha/kernel/sys_dp264.c
+++ b/arch/alpha/kernel/sys_dp264.c
@@ -190,9 +190,6 @@ static struct irq_chip clipper_irq_type = {
static void
dp264_device_interrupt(unsigned long vector)
{
-#if 1
- printk("dp264_device_interrupt: NOT IMPLEMENTED YET!!\n");
-#else
unsigned long pld;
unsigned int i;
@@ -210,12 +207,7 @@ dp264_device_interrupt(unsigned long vector)
isa_device_interrupt(vector);
else
handle_irq(16 + i);
-#if 0
- TSUNAMI_cchip->dir0.csr = 1UL << i; mb();
- tmp = TSUNAMI_cchip->dir0.csr;
-#endif
}
-#endif
}
static void
diff --git a/arch/alpha/kernel/sys_marvel.c b/arch/alpha/kernel/sys_marvel.c
index 407accc8087..c92e389ff21 100644
--- a/arch/alpha/kernel/sys_marvel.c
+++ b/arch/alpha/kernel/sys_marvel.c
@@ -317,8 +317,9 @@ marvel_init_irq(void)
}
static int
-marvel_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+marvel_map_irq(const struct pci_dev *cdev, u8 slot, u8 pin)
{
+ struct pci_dev *dev = (struct pci_dev *)cdev;
struct pci_controller *hose = dev->sysdata;
struct io7_port *io7_port = hose->sysdata;
struct io7 *io7 = io7_port->io7;
diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S
index 4284ec798ec..dca9b3fb007 100644
--- a/arch/alpha/kernel/systbls.S
+++ b/arch/alpha/kernel/systbls.S
@@ -524,6 +524,8 @@ sys_call_table:
.quad sys_sendmmsg
.quad sys_process_vm_readv
.quad sys_process_vm_writev /* 505 */
+ .quad sys_kcmp
+ .quad sys_finit_module
.size sys_call_table, . - sys_call_table
.type sys_call_table, @object
diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c
index e336694ca04..ea339503655 100644
--- a/arch/alpha/kernel/time.c
+++ b/arch/alpha/kernel/time.c
@@ -105,9 +105,7 @@ void arch_irq_work_raise(void)
static inline __u32 rpcc(void)
{
- __u32 result;
- asm volatile ("rpcc %0" : "=r"(result));
- return result;
+ return __builtin_alpha_rpcc();
}
int update_persistent_clock(struct timespec now)
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
index be1fba334bd..bd0665cdc84 100644
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -66,8 +66,8 @@ dik_show_regs(struct pt_regs *regs, unsigned long *r9_15)
{
printk("pc = [<%016lx>] ra = [<%016lx>] ps = %04lx %s\n",
regs->pc, regs->r26, regs->ps, print_tainted());
- print_symbol("pc is at %s\n", regs->pc);
- print_symbol("ra is at %s\n", regs->r26 );
+ printk("pc is at %pSR\n", (void *)regs->pc);
+ printk("ra is at %pSR\n", (void *)regs->r26);
printk("v0 = %016lx t0 = %016lx t1 = %016lx\n",
regs->r0, regs->r1, regs->r2);
printk("t2 = %016lx t3 = %016lx t4 = %016lx\n",
@@ -132,9 +132,7 @@ dik_show_trace(unsigned long *sp)
continue;
if (tmp >= (unsigned long) &_etext)
continue;
- printk("[<%lx>]", tmp);
- print_symbol(" %s", tmp);
- printk("\n");
+ printk("[<%lx>] %pSR\n", tmp, (void *)tmp);
if (i > 40) {
printk(" ...");
break;
diff --git a/arch/arc/include/asm/entry.h b/arch/arc/include/asm/entry.h
index 8943c028d4b..df57611652e 100644
--- a/arch/arc/include/asm/entry.h
+++ b/arch/arc/include/asm/entry.h
@@ -38,6 +38,7 @@
#include <asm/ptrace.h>
#include <asm/processor.h> /* For VMALLOC_START */
#include <asm/thread_info.h> /* For THREAD_SIZE */
+#include <asm/mmu.h>
/* Note on the LD/ST addr modes with addr reg wback
*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ba412e02ec0..43594d5116e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -20,7 +20,6 @@ config ARM
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select HARDIRQS_SW_RESEND
- select HAVE_AOUT
select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
select HAVE_ARCH_KGDB
select HAVE_ARCH_SECCOMP_FILTER
@@ -218,7 +217,8 @@ config VECTORS_BASE
default DRAM_BASE if REMAP_VECTORS_TO_RAM
default 0x00000000
help
- The base address of exception vectors.
+ The base address of exception vectors. This must be two pages
+ in size.
config ARM_PATCH_PHYS_VIRT
bool "Patch physical to virtual translations at runtime" if EMBEDDED
@@ -1600,8 +1600,7 @@ config LOCAL_TIMERS
config ARCH_NR_GPIO
int
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
- default 512 if SOC_OMAP5
- default 512 if ARCH_KEYSTONE
+ default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5
default 392 if ARCH_U8500
default 352 if ARCH_VT8500
default 288 if ARCH_SUNXI
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index e401a766c0b..583f4a00ec3 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -804,9 +804,19 @@ config DEBUG_LL_INCLUDE
config DEBUG_UNCOMPRESS
bool
- default y if ARCH_MULTIPLATFORM && DEBUG_LL && \
- !DEBUG_OMAP2PLUS_UART && \
+ depends on ARCH_MULTIPLATFORM
+ default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
!DEBUG_TEGRA_UART
+ help
+ This option influences the normal decompressor output for
+ multiplatform kernels. Normally, multiplatform kernels disable
+ decompressor output because it is not possible to know where to
+ send the decompressor output.
+
+ When this option is set, the selected DEBUG_LL output method
+ will be re-used for normal decompressor output on multiplatform
+ kernels.
+
config UNCOMPRESS_INCLUDE
string
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c0ac0f5e5e5..6fd2ceae305 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -153,6 +153,7 @@ machine-$(CONFIG_ARCH_DAVINCI) += davinci
machine-$(CONFIG_ARCH_DOVE) += dove
machine-$(CONFIG_ARCH_EBSA110) += ebsa110
machine-$(CONFIG_ARCH_EP93XX) += ep93xx
+machine-$(CONFIG_ARCH_EXYNOS) += exynos
machine-$(CONFIG_ARCH_GEMINI) += gemini
machine-$(CONFIG_ARCH_HIGHBANK) += highbank
machine-$(CONFIG_ARCH_INTEGRATOR) += integrator
@@ -160,15 +161,16 @@ machine-$(CONFIG_ARCH_IOP13XX) += iop13xx
machine-$(CONFIG_ARCH_IOP32X) += iop32x
machine-$(CONFIG_ARCH_IOP33X) += iop33x
machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx
+machine-$(CONFIG_ARCH_KEYSTONE) += keystone
machine-$(CONFIG_ARCH_KIRKWOOD) += kirkwood
machine-$(CONFIG_ARCH_KS8695) += ks8695
machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
machine-$(CONFIG_ARCH_MMP) += mmp
machine-$(CONFIG_ARCH_MSM) += msm
machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0
+machine-$(CONFIG_ARCH_MVEBU) += mvebu
machine-$(CONFIG_ARCH_MXC) += imx
machine-$(CONFIG_ARCH_MXS) += mxs
-machine-$(CONFIG_ARCH_MVEBU) += mvebu
machine-$(CONFIG_ARCH_NETX) += netx
machine-$(CONFIG_ARCH_NOMADIK) += nomadik
machine-$(CONFIG_ARCH_NSPIRE) += nspire
@@ -176,7 +178,6 @@ machine-$(CONFIG_ARCH_OMAP1) += omap1
machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
machine-$(CONFIG_ARCH_ORION5X) += orion5x
machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
-machine-$(CONFIG_ARCH_SIRF) += prima2
machine-$(CONFIG_ARCH_PXA) += pxa
machine-$(CONFIG_ARCH_REALVIEW) += realview
machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
@@ -186,25 +187,24 @@ machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx
machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0
machine-$(CONFIG_ARCH_S5PC100) += s5pc100
machine-$(CONFIG_ARCH_S5PV210) += s5pv210
-machine-$(CONFIG_ARCH_EXYNOS) += exynos
machine-$(CONFIG_ARCH_SA1100) += sa1100
machine-$(CONFIG_ARCH_SHARK) += shark
machine-$(CONFIG_ARCH_SHMOBILE) += shmobile
+machine-$(CONFIG_ARCH_SIRF) += prima2
+machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
+machine-$(CONFIG_ARCH_STI) += sti
+machine-$(CONFIG_ARCH_SUNXI) += sunxi
machine-$(CONFIG_ARCH_TEGRA) += tegra
machine-$(CONFIG_ARCH_U300) += u300
machine-$(CONFIG_ARCH_U8500) += ux500
machine-$(CONFIG_ARCH_VERSATILE) += versatile
machine-$(CONFIG_ARCH_VEXPRESS) += vexpress
+machine-$(CONFIG_ARCH_VIRT) += virt
machine-$(CONFIG_ARCH_VT8500) += vt8500
machine-$(CONFIG_ARCH_W90X900) += w90x900
+machine-$(CONFIG_ARCH_ZYNQ) += zynq
machine-$(CONFIG_FOOTBRIDGE) += footbridge
-machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
machine-$(CONFIG_PLAT_SPEAR) += spear
-machine-$(CONFIG_ARCH_STI) += sti
-machine-$(CONFIG_ARCH_VIRT) += virt
-machine-$(CONFIG_ARCH_ZYNQ) += zynq
-machine-$(CONFIG_ARCH_SUNXI) += sunxi
-machine-$(CONFIG_ARCH_KEYSTONE) += keystone
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi
index 9866cd736de..a0f2721ea58 100644
--- a/arch/arm/boot/dts/atlas6.dtsi
+++ b/arch/arm/boot/dts/atlas6.dtsi
@@ -485,6 +485,12 @@
sirf,function = "usp0";
};
};
+ usp0_uart_nostreamctrl_pins_a: usp0@1 {
+ usp0 {
+ sirf,pins = "usp0_uart_nostreamctrl_grp";
+ sirf,function = "usp0_uart_nostreamctrl";
+ };
+ };
usp1_pins_a: usp1@0 {
usp1 {
sirf,pins = "usp1grp";
@@ -515,16 +521,16 @@
sirf,function = "pulse_count";
};
};
- cko0_rst_pins_a: cko0_rst@0 {
- cko0_rst {
- sirf,pins = "cko0_rstgrp";
- sirf,function = "cko0_rst";
+ cko0_pins_a: cko0@0 {
+ cko0 {
+ sirf,pins = "cko0grp";
+ sirf,function = "cko0";
};
};
- cko1_rst_pins_a: cko1_rst@0 {
- cko1_rst {
- sirf,pins = "cko1_rstgrp";
- sirf,function = "cko1_rst";
+ cko1_pins_a: cko1@0 {
+ cko1 {
+ sirf,pins = "cko1grp";
+ sirf,function = "cko1";
};
};
};
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index 43bf3c796cb..0e7fed47bd8 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -147,7 +147,7 @@
reg = <0x0a>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
-
+ clocks = <&saif0>;
};
pcf8563: rtc@51 {
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 1f0d38d7b16..e035f4664b9 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -195,7 +195,7 @@
reg = <0x0a>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
-
+ clocks = <&saif0>;
};
at24@51 {
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 880df2f13be..44d9da57736 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -184,7 +184,7 @@
reg = <0x0a>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
-
+ clocks = <&saif0>;
};
eeprom: eeprom@51 {
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 6a8acb01b1d..9524a057128 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -837,6 +837,7 @@
compatible = "fsl,imx28-saif";
reg = <0x80042000 0x2000>;
interrupts = <59 80>;
+ #clock-cells = <0>;
clocks = <&clks 53>;
dmas = <&dma_apbx 4>;
dma-names = "rx-tx";
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 6dd9486c755..ad3471ca17c 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -61,6 +61,16 @@
mux-int-port = <2>;
mux-ext-port = <3>;
};
+
+ clocks {
+ clk_26M: codec_clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ gpios = <&gpio4 26 1>;
+ };
+ };
};
&esdhc1 {
@@ -229,6 +239,7 @@
MX51_PAD_EIM_A27__GPIO2_21 0x5
MX51_PAD_CSPI1_SS0__GPIO4_24 0x85
MX51_PAD_CSPI1_SS1__GPIO4_25 0x85
+ MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000
>;
};
};
@@ -255,7 +266,7 @@
sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- clock-frequency = <26000000>;
+ clocks = <&clk_26M>;
VDDA-supply = <&vdig_reg>;
VDDIO-supply = <&vvideo_reg>;
};
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index aaa33bc99f7..a6309026794 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -27,7 +27,7 @@
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm2 0 50000 0 0>;
+ pwms = <&pwm2 0 50000>;
brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
default-brightness-level = <10>;
enable-gpios = <&gpio7 7 0>;
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 3895fbba8fc..569aa9f2c4e 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -725,15 +725,15 @@
uart1 {
pinctrl_uart1_1: uart1grp-1 {
fsl,pins = <
- MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1c5
- MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1c5
+ MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
+ MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4
>;
};
pinctrl_uart1_2: uart1grp-2 {
fsl,pins = <
- MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1c5
- MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1c5
+ MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
+ MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
>;
};
@@ -748,8 +748,8 @@
uart2 {
pinctrl_uart2_1: uart2grp-1 {
fsl,pins = <
- MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5
- MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5
+ MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
+ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
>;
};
@@ -766,17 +766,17 @@
uart3 {
pinctrl_uart3_1: uart3grp-1 {
fsl,pins = <
- MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5
- MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5
- MX53_PAD_PATA_DA_1__UART3_CTS 0x1c5
- MX53_PAD_PATA_DA_2__UART3_RTS 0x1c5
+ MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+ MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
+ MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4
+ MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4
>;
};
pinctrl_uart3_2: uart3grp-2 {
fsl,pins = <
- MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5
- MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5
+ MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+ MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
>;
};
@@ -785,8 +785,8 @@
uart4 {
pinctrl_uart4_1: uart4grp-1 {
fsl,pins = <
- MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1c5
- MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1c5
+ MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4
+ MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4
>;
};
};
@@ -794,8 +794,8 @@
uart5 {
pinctrl_uart5_1: uart5grp-1 {
fsl,pins = <
- MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1c5
- MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1c5
+ MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4
+ MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4
>;
};
};
diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
index 05e9489cf95..bbeb623fc2c 100644
--- a/arch/arm/boot/dts/prima2.dtsi
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -515,16 +515,16 @@
sirf,function = "pulse_count";
};
};
- cko0_rst_pins_a: cko0_rst@0 {
- cko0_rst {
- sirf,pins = "cko0_rstgrp";
- sirf,function = "cko0_rst";
+ cko0_pins_a: cko0@0 {
+ cko0 {
+ sirf,pins = "cko0grp";
+ sirf,function = "cko0";
};
};
- cko1_rst_pins_a: cko1_rst@0 {
- cko1_rst {
- sirf,pins = "cko1_rstgrp";
- sirf,function = "cko1_rst";
+ cko1_pins_a: cko1@0 {
+ cko1 {
+ sirf,pins = "cko1grp";
+ sirf,function = "cko1";
};
};
};
diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi
index 957b21a71b4..0f246c97926 100644
--- a/arch/arm/boot/dts/stih416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
@@ -166,6 +166,15 @@
reg = <0x9000 0x100>;
st,bank-name = "PIO31";
};
+
+ serial2-oe {
+ pinctrl_serial2_oe: serial2-1 {
+ st,pins {
+ output-enable = <&PIO11 3 ALT2 OUT>;
+ };
+ };
+ };
+
};
pin-controller-rear {
@@ -218,7 +227,6 @@
st,pins {
tx = <&PIO17 4 ALT2 OUT>;
rx = <&PIO17 5 ALT2 IN>;
- output-enable = <&PIO11 3 ALT2 OUT>;
};
};
};
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index 3cecd9689a4..1a0326ea7d0 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -79,7 +79,7 @@
interrupts = <0 197 0>;
clocks = <&CLK_S_ICN_REG_0>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_serial2>;
+ pinctrl-0 = <&pinctrl_serial2 &pinctrl_serial2_oe>;
};
/* SBC_UART1 */
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index b3034da00a3..ae6a17aed9e 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -47,6 +47,12 @@
regulator-max-microvolt = <3150000>;
};
+ vmmc2: regulator-vmmc2 {
+ compatible = "ti,twl4030-vmmc2";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <3150000>;
+ };
+
vusb1v5: regulator-vusb1v5 {
compatible = "ti,twl4030-vusb1v5";
};
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index e1eb7dadda8..67d929cf980 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -442,8 +442,8 @@
compatible = "fsl,mvf600-fec";
reg = <0x400d0000 0x1000>;
interrupts = <0 78 0x04>;
- clocks = <&clks VF610_CLK_ENET>,
- <&clks VF610_CLK_ENET>,
+ clocks = <&clks VF610_CLK_ENET0>,
+ <&clks VF610_CLK_ENET0>,
<&clks VF610_CLK_ENET>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
@@ -453,8 +453,8 @@
compatible = "fsl,mvf600-fec";
reg = <0x400d1000 0x1000>;
interrupts = <0 79 0x04>;
- clocks = <&clks VF610_CLK_ENET>,
- <&clks VF610_CLK_ENET>,
+ clocks = <&clks VF610_CLK_ENET1>,
+ <&clks VF610_CLK_ENET1>,
<&clks VF610_CLK_ENET>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index a432e6c1dac..39ad030ac0c 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -26,7 +26,6 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/edma.h>
-#include <linux/err.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_dma.h>
diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig
index 7c868139bdb..1571bea48be 100644
--- a/arch/arm/configs/da8xx_omapl_defconfig
+++ b/arch/arm/configs/da8xx_omapl_defconfig
@@ -102,6 +102,8 @@ CONFIG_SND_SOC=m
CONFIG_SND_DAVINCI_SOC=m
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
+CONFIG_DMADEVICES=y
+CONFIG_TI_EDMA=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_XFS_FS=m
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index c86fd75e181..ab2f7378352 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -162,6 +162,8 @@ CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_TI_EDMA=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_XFS_FS=m
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index fe0bdc361d2..6e572c64cf5 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -53,6 +53,7 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_OMAP_OCP2SCP=y
CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
CONFIG_SATA_AHCI_PLATFORM=y
@@ -61,6 +62,7 @@ CONFIG_SATA_MV=y
CONFIG_NETDEVICES=y
CONFIG_SUN4I_EMAC=y
CONFIG_NET_CALXEDA_XGMAC=y
+CONFIG_KS8851=y
CONFIG_SMSC911X=y
CONFIG_STMMAC_ETH=y
CONFIG_MDIO_SUN4I=y
@@ -89,6 +91,7 @@ CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_SIRF=y
CONFIG_I2C_TEGRA=y
CONFIG_SPI=y
+CONFIG_SPI_OMAP24XX=y
CONFIG_SPI_PL022=y
CONFIG_SPI_SIRF=y
CONFIG_SPI_TEGRA114=y
@@ -111,11 +114,12 @@ CONFIG_FB_SIMPLE=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
CONFIG_USB_EHCI_TEGRA=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_AB8500_USB=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_OMAP_USB2=y
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index 35f8cf299fa..263ae3869e3 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -1,6 +1,8 @@
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -48,7 +50,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_TESTS=m
CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=y
@@ -94,8 +95,10 @@ CONFIG_I2C_GPIO=y
CONFIG_I2C_NOMADIK=y
CONFIG_DEBUG_GPIO=y
# CONFIG_HWMON is not set
+CONFIG_REGULATOR=y
CONFIG_MMC=y
-CONFIG_MMC_CLKGATE=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
diff --git a/arch/arm/include/asm/a.out-core.h b/arch/arm/include/asm/a.out-core.h
deleted file mode 100644
index 92f10cb5c70..00000000000
--- a/arch/arm/include/asm/a.out-core.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* a.out coredump register dumper
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_A_OUT_CORE_H
-#define _ASM_A_OUT_CORE_H
-
-#ifdef __KERNEL__
-
-#include <linux/user.h>
-#include <linux/elfcore.h>
-
-/*
- * fill in the user structure for an a.out core dump
- */
-static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
-{
- struct task_struct *tsk = current;
-
- dump->magic = CMAGIC;
- dump->start_code = tsk->mm->start_code;
- dump->start_stack = regs->ARM_sp & ~(PAGE_SIZE - 1);
-
- dump->u_tsize = (tsk->mm->end_code - tsk->mm->start_code) >> PAGE_SHIFT;
- dump->u_dsize = (tsk->mm->brk - tsk->mm->start_data + PAGE_SIZE - 1) >> PAGE_SHIFT;
- dump->u_ssize = 0;
-
- memset(dump->u_debugreg, 0, sizeof(dump->u_debugreg));
-
- if (dump->start_stack < 0x04000000)
- dump->u_ssize = (0x04000000 - dump->start_stack) >> PAGE_SHIFT;
-
- dump->regs = *regs;
- dump->u_fpvalid = dump_fpu (regs, &dump->u_fp);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_A_OUT_CORE_H */
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 8c25dc4e985..9672e978d50 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -89,13 +89,18 @@ extern unsigned int processor_id;
__val; \
})
+/*
+ * The memory clobber prevents gcc 4.5 from reordering the mrc before
+ * any is_smp() tests, which can cause undefined instruction aborts on
+ * ARM1136 r0 due to the missing extended CP15 registers.
+ */
#define read_cpuid_ext(ext_reg) \
({ \
unsigned int __val; \
asm("mrc p15, 0, %0, c0, " ext_reg \
: "=r" (__val) \
: \
- : "cc"); \
+ : "memory"); \
__val; \
})
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index 38050b1c480..56211f2084e 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -130,4 +130,10 @@ struct mm_struct;
extern unsigned long arch_randomize_brk(struct mm_struct *mm);
#define arch_randomize_brk arch_randomize_brk
+#ifdef CONFIG_MMU
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
+struct linux_binprm;
+int arch_setup_additional_pages(struct linux_binprm *, int);
+#endif
+
#endif
diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h
index e3d55547e75..6f18da09668 100644
--- a/arch/arm/include/asm/mmu.h
+++ b/arch/arm/include/asm/mmu.h
@@ -6,8 +6,11 @@
typedef struct {
#ifdef CONFIG_CPU_HAS_ASID
atomic64_t id;
+#else
+ int switch_pending;
#endif
unsigned int vmalloc_seq;
+ unsigned long sigpage;
} mm_context_t;
#ifdef CONFIG_CPU_HAS_ASID
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index b5792b7fd8d..9b32f76bb0d 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -56,7 +56,7 @@ static inline void check_and_switch_context(struct mm_struct *mm,
* on non-ASID CPUs, the old mm will remain valid until the
* finish_arch_post_lock_switch() call.
*/
- set_ti_thread_flag(task_thread_info(tsk), TIF_SWITCH_MM);
+ mm->context.switch_pending = 1;
else
cpu_switch_mm(mm->pgd, mm);
}
@@ -65,9 +65,21 @@ static inline void check_and_switch_context(struct mm_struct *mm,
finish_arch_post_lock_switch
static inline void finish_arch_post_lock_switch(void)
{
- if (test_and_clear_thread_flag(TIF_SWITCH_MM)) {
- struct mm_struct *mm = current->mm;
- cpu_switch_mm(mm->pgd, mm);
+ struct mm_struct *mm = current->mm;
+
+ if (mm && mm->context.switch_pending) {
+ /*
+ * Preemption must be disabled during cpu_switch_mm() as we
+ * have some stateful cache flush implementations. Check
+ * switch_pending again in case we were preempted and the
+ * switch to this mm was already done.
+ */
+ preempt_disable();
+ if (mm->context.switch_pending) {
+ mm->context.switch_pending = 0;
+ cpu_switch_mm(mm->pgd, mm);
+ }
+ preempt_enable_no_resched();
}
}
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index 6363f3d1d50..4355f0ec44d 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -142,7 +142,9 @@ extern void __cpu_copy_user_highpage(struct page *to, struct page *from,
#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
extern void copy_page(void *to, const void *from);
+#ifdef CONFIG_KUSER_HELPERS
#define __HAVE_ARCH_GATE_AREA 1
+#endif
#ifdef CONFIG_ARM_LPAE
#include <asm/pgtable-3level-types.h>
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 06e7d509eaa..413f3876341 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -54,7 +54,6 @@ struct thread_struct {
#define start_thread(regs,pc,sp) \
({ \
- unsigned long *stack = (unsigned long *)sp; \
memset(regs->uregs, 0, sizeof(regs->uregs)); \
if (current->personality & ADDR_LIMIT_32BIT) \
regs->ARM_cpsr = USR_MODE; \
@@ -65,9 +64,6 @@ struct thread_struct {
regs->ARM_cpsr |= PSR_ENDSTATE; \
regs->ARM_pc = pc & ~1; /* pc */ \
regs->ARM_sp = sp; /* sp */ \
- regs->ARM_r2 = stack[2]; /* r2 (envp) */ \
- regs->ARM_r1 = stack[1]; /* r1 (argv) */ \
- regs->ARM_r0 = stack[0]; /* r0 (argc) */ \
nommu_start_thread(regs); \
})
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 214d4158089..2b8114fcba0 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -156,7 +156,6 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
#define TIF_USING_IWMMXT 17
#define TIF_MEMDIE 18 /* is terminating due to OOM killer */
#define TIF_RESTORE_SIGMASK 20
-#define TIF_SWITCH_MM 22 /* deferred switch_mm */
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index fdbb9e36974..f467e9b3f8d 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -443,7 +443,18 @@ static inline void local_flush_bp_all(void)
isb();
}
+#include <asm/cputype.h>
#ifdef CONFIG_ARM_ERRATA_798181
+static inline int erratum_a15_798181(void)
+{
+ unsigned int midr = read_cpuid_id();
+
+ /* Cortex-A15 r0p0..r3p2 affected */
+ if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2)
+ return 0;
+ return 1;
+}
+
static inline void dummy_flush_tlb_a15_erratum(void)
{
/*
@@ -453,6 +464,11 @@ static inline void dummy_flush_tlb_a15_erratum(void)
dsb();
}
#else
+static inline int erratum_a15_798181(void)
+{
+ return 0;
+}
+
static inline void dummy_flush_tlb_a15_erratum(void)
{
}
diff --git a/arch/arm/include/asm/virt.h b/arch/arm/include/asm/virt.h
index 50af92bac73..4371f45c578 100644
--- a/arch/arm/include/asm/virt.h
+++ b/arch/arm/include/asm/virt.h
@@ -29,6 +29,7 @@
#define BOOT_CPU_MODE_MISMATCH PSR_N_BIT
#ifndef __ASSEMBLY__
+#include <asm/cacheflush.h>
#ifdef CONFIG_ARM_VIRT_EXT
/*
@@ -41,10 +42,21 @@
*/
extern int __boot_cpu_mode;
+static inline void sync_boot_mode(void)
+{
+ /*
+ * As secondaries write to __boot_cpu_mode with caches disabled, we
+ * must flush the corresponding cache entries to ensure the visibility
+ * of their writes.
+ */
+ sync_cache_r(&__boot_cpu_mode);
+}
+
void __hyp_set_vectors(unsigned long phys_vector_base);
unsigned long __hyp_get_vectors(void);
#else
#define __boot_cpu_mode (SVC_MODE)
+#define sync_boot_mode()
#endif
#ifndef ZIMAGE
diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild
index 47bcb2d254a..18d76fd5a2a 100644
--- a/arch/arm/include/uapi/asm/Kbuild
+++ b/arch/arm/include/uapi/asm/Kbuild
@@ -1,7 +1,6 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += a.out.h
header-y += byteorder.h
header-y += fcntl.h
header-y += hwcap.h
diff --git a/arch/arm/include/uapi/asm/a.out.h b/arch/arm/include/uapi/asm/a.out.h
deleted file mode 100644
index 083894b2e3b..00000000000
--- a/arch/arm/include/uapi/asm/a.out.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __ARM_A_OUT_H__
-#define __ARM_A_OUT_H__
-
-#include <linux/personality.h>
-#include <linux/types.h>
-
-struct exec
-{
- __u32 a_info; /* Use macros N_MAGIC, etc for access */
- __u32 a_text; /* length of text, in bytes */
- __u32 a_data; /* length of data, in bytes */
- __u32 a_bss; /* length of uninitialized data area for file, in bytes */
- __u32 a_syms; /* length of symbol table data in file, in bytes */
- __u32 a_entry; /* start address */
- __u32 a_trsize; /* length of relocation info for text, in bytes */
- __u32 a_drsize; /* length of relocation info for data, in bytes */
-};
-
-/*
- * This is always the same
- */
-#define N_TXTADDR(a) (0x00008000)
-
-#define N_TRSIZE(a) ((a).a_trsize)
-#define N_DRSIZE(a) ((a).a_drsize)
-#define N_SYMSIZE(a) ((a).a_syms)
-
-#define M_ARM 103
-
-#ifndef LIBRARY_START_TEXT
-#define LIBRARY_START_TEXT (0x00c00000)
-#endif
-
-#endif /* __A_OUT_GNU_H__ */
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index a39cfc2a1f9..d40d0ef389d 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -742,6 +742,18 @@ ENDPROC(__switch_to)
#endif
.endm
+ .macro kuser_pad, sym, size
+ .if (. - \sym) & 3
+ .rept 4 - (. - \sym) & 3
+ .byte 0
+ .endr
+ .endif
+ .rept (\size - (. - \sym)) / 4
+ .word 0xe7fddef1
+ .endr
+ .endm
+
+#ifdef CONFIG_KUSER_HELPERS
.align 5
.globl __kuser_helper_start
__kuser_helper_start:
@@ -832,18 +844,13 @@ kuser_cmpxchg64_fixup:
#error "incoherent kernel configuration"
#endif
- /* pad to next slot */
- .rept (16 - (. - __kuser_cmpxchg64)/4)
- .word 0
- .endr
-
- .align 5
+ kuser_pad __kuser_cmpxchg64, 64
__kuser_memory_barrier: @ 0xffff0fa0
smp_dmb arm
usr_ret lr
- .align 5
+ kuser_pad __kuser_memory_barrier, 32
__kuser_cmpxchg: @ 0xffff0fc0
@@ -916,13 +923,14 @@ kuser_cmpxchg32_fixup:
#endif
- .align 5
+ kuser_pad __kuser_cmpxchg, 32
__kuser_get_tls: @ 0xffff0fe0
ldr r0, [pc, #(16 - 8)] @ read TLS, set in kuser_get_tls_init
usr_ret lr
mrc p15, 0, r0, c13, c0, 3 @ 0xffff0fe8 hardware TLS code
- .rep 4
+ kuser_pad __kuser_get_tls, 16
+ .rep 3
.word 0 @ 0xffff0ff0 software TLS value, then
.endr @ pad up to __kuser_helper_version
@@ -932,14 +940,16 @@ __kuser_helper_version: @ 0xffff0ffc
.globl __kuser_helper_end
__kuser_helper_end:
+#endif
+
THUMB( .thumb )
/*
* Vector stubs.
*
- * This code is copied to 0xffff0200 so we can use branches in the
- * vectors, rather than ldr's. Note that this code must not
- * exceed 0x300 bytes.
+ * This code is copied to 0xffff1000 so we can use branches in the
+ * vectors, rather than ldr's. Note that this code must not exceed
+ * a page size.
*
* Common stub entry macro:
* Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
@@ -986,8 +996,17 @@ ENDPROC(vector_\name)
1:
.endm
- .globl __stubs_start
+ .section .stubs, "ax", %progbits
__stubs_start:
+ @ This must be the first word
+ .word vector_swi
+
+vector_rst:
+ ARM( swi SYS_ERROR0 )
+ THUMB( svc #0 )
+ THUMB( nop )
+ b vector_und
+
/*
* Interrupt dispatcher
*/
@@ -1082,6 +1101,16 @@ __stubs_start:
.align 5
/*=============================================================================
+ * Address exception handler
+ *-----------------------------------------------------------------------------
+ * These aren't too critical.
+ * (they're not supposed to happen, and won't happen in 32-bit data mode).
+ */
+
+vector_addrexcptn:
+ b vector_addrexcptn
+
+/*=============================================================================
* Undefined FIQs
*-----------------------------------------------------------------------------
* Enter in FIQ mode, spsr = ANY CPSR, lr = ANY PC
@@ -1094,45 +1123,19 @@ __stubs_start:
vector_fiq:
subs pc, lr, #4
-/*=============================================================================
- * Address exception handler
- *-----------------------------------------------------------------------------
- * These aren't too critical.
- * (they're not supposed to happen, and won't happen in 32-bit data mode).
- */
-
-vector_addrexcptn:
- b vector_addrexcptn
-
-/*
- * We group all the following data together to optimise
- * for CPUs with separate I & D caches.
- */
- .align 5
-
-.LCvswi:
- .word vector_swi
-
- .globl __stubs_end
-__stubs_end:
-
- .equ stubs_offset, __vectors_start + 0x200 - __stubs_start
+ .globl vector_fiq_offset
+ .equ vector_fiq_offset, vector_fiq
- .globl __vectors_start
+ .section .vectors, "ax", %progbits
__vectors_start:
- ARM( swi SYS_ERROR0 )
- THUMB( svc #0 )
- THUMB( nop )
- W(b) vector_und + stubs_offset
- W(ldr) pc, .LCvswi + stubs_offset
- W(b) vector_pabt + stubs_offset
- W(b) vector_dabt + stubs_offset
- W(b) vector_addrexcptn + stubs_offset
- W(b) vector_irq + stubs_offset
- W(b) vector_fiq + stubs_offset
-
- .globl __vectors_end
-__vectors_end:
+ W(b) vector_rst
+ W(b) vector_und
+ W(ldr) pc, __vectors_start + 0x1000
+ W(b) vector_pabt
+ W(b) vector_dabt
+ W(b) vector_addrexcptn
+ W(b) vector_irq
+ W(b) vector_fiq
.data
diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S
index e00621f1403..52b26432c9a 100644
--- a/arch/arm/kernel/entry-v7m.S
+++ b/arch/arm/kernel/entry-v7m.S
@@ -49,7 +49,7 @@ __irq_entry:
mov r1, sp
stmdb sp!, {lr}
@ routine called with r0 = irq number, r1 = struct pt_regs *
- bl nvic_do_IRQ
+ bl nvic_handle_irq
pop {lr}
@
diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c
index 2adda11f712..25442f45114 100644
--- a/arch/arm/kernel/fiq.c
+++ b/arch/arm/kernel/fiq.c
@@ -47,6 +47,11 @@
#include <asm/irq.h>
#include <asm/traps.h>
+#define FIQ_OFFSET ({ \
+ extern void *vector_fiq_offset; \
+ (unsigned)&vector_fiq_offset; \
+ })
+
static unsigned long no_fiq_insn;
/* Default reacquire function
@@ -80,13 +85,16 @@ int show_fiq_list(struct seq_file *p, int prec)
void set_fiq_handler(void *start, unsigned int length)
{
#if defined(CONFIG_CPU_USE_DOMAINS)
- memcpy((void *)0xffff001c, start, length);
+ void *base = (void *)0xffff0000;
#else
- memcpy(vectors_page + 0x1c, start, length);
+ void *base = vectors_page;
#endif
- flush_icache_range(0xffff001c, 0xffff001c + length);
+ unsigned offset = FIQ_OFFSET;
+
+ memcpy(base + offset, start, length);
+ flush_icache_range(0xffff0000 + offset, 0xffff0000 + offset + length);
if (!vectors_high())
- flush_icache_range(0x1c, 0x1c + length);
+ flush_icache_range(offset, offset + length);
}
int claim_fiq(struct fiq_handler *f)
@@ -144,6 +152,7 @@ EXPORT_SYMBOL(disable_fiq);
void __init init_FIQ(int start)
{
- no_fiq_insn = *(unsigned long *)0xffff001c;
+ unsigned offset = FIQ_OFFSET;
+ no_fiq_insn = *(unsigned long *)(0xffff0000 + offset);
fiq_start = start;
}
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index b361de14375..14235ba64a9 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -87,6 +87,7 @@ ENTRY(stext)
ENDPROC(stext)
#ifdef CONFIG_SMP
+ .text
ENTRY(secondary_startup)
/*
* Common entry point for secondary CPUs.
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 9cf6063020a..2c7cc1e0347 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -343,6 +343,7 @@ __turn_mmu_on_loc:
.long __turn_mmu_on_end
#if defined(CONFIG_SMP)
+ .text
ENTRY(secondary_startup)
/*
* Common entry point for secondary CPUs.
diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S
index 4910232c483..797b1a6a490 100644
--- a/arch/arm/kernel/hyp-stub.S
+++ b/arch/arm/kernel/hyp-stub.S
@@ -56,8 +56,8 @@ ENTRY(__boot_cpu_mode)
ldr \reg3, [\reg2]
ldr \reg1, [\reg2, \reg3]
cmp \mode, \reg1 @ matches primary CPU boot mode?
- orrne r7, r7, #BOOT_CPU_MODE_MISMATCH
- strne r7, [r5, r6] @ record what happened and give up
+ orrne \reg1, \reg1, #BOOT_CPU_MODE_MISMATCH
+ strne \reg1, [\reg2, \reg3] @ record what happened and give up
.endm
#else /* ZIMAGE */
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index d3ca4f6915a..536c85fe72a 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -197,6 +197,7 @@ void machine_shutdown(void)
*/
void machine_halt(void)
{
+ local_irq_disable();
smp_send_stop();
local_irq_disable();
@@ -211,6 +212,7 @@ void machine_halt(void)
*/
void machine_power_off(void)
{
+ local_irq_disable();
smp_send_stop();
if (pm_power_off)
@@ -230,6 +232,7 @@ void machine_power_off(void)
*/
void machine_restart(char *cmd)
{
+ local_irq_disable();
smp_send_stop();
arm_pm_restart(reboot_mode, cmd);
@@ -426,10 +429,11 @@ unsigned long arch_randomize_brk(struct mm_struct *mm)
}
#ifdef CONFIG_MMU
+#ifdef CONFIG_KUSER_HELPERS
/*
* The vectors page is always readable from user space for the
- * atomic helpers and the signal restart code. Insert it into the
- * gate_vma so that it is visible through ptrace and /proc/<pid>/mem.
+ * atomic helpers. Insert it into the gate_vma so that it is visible
+ * through ptrace and /proc/<pid>/mem.
*/
static struct vm_area_struct gate_vma = {
.vm_start = 0xffff0000,
@@ -458,9 +462,48 @@ int in_gate_area_no_mm(unsigned long addr)
{
return in_gate_area(NULL, addr);
}
+#define is_gate_vma(vma) ((vma) = &gate_vma)
+#else
+#define is_gate_vma(vma) 0
+#endif
const char *arch_vma_name(struct vm_area_struct *vma)
{
- return (vma == &gate_vma) ? "[vectors]" : NULL;
+ return is_gate_vma(vma) ? "[vectors]" :
+ (vma->vm_mm && vma->vm_start == vma->vm_mm->context.sigpage) ?
+ "[sigpage]" : NULL;
+}
+
+static struct page *signal_page;
+extern struct page *get_signal_page(void);
+
+int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
+{
+ struct mm_struct *mm = current->mm;
+ unsigned long addr;
+ int ret;
+
+ if (!signal_page)
+ signal_page = get_signal_page();
+ if (!signal_page)
+ return -ENOMEM;
+
+ down_write(&mm->mmap_sem);
+ addr = get_unmapped_area(NULL, 0, PAGE_SIZE, 0, 0);
+ if (IS_ERR_VALUE(addr)) {
+ ret = addr;
+ goto up_fail;
+ }
+
+ ret = install_special_mapping(mm, addr, PAGE_SIZE,
+ VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
+ &signal_page);
+
+ if (ret == 0)
+ mm->context.sigpage = addr;
+
+ up_fail:
+ up_write(&mm->mmap_sem);
+ return ret;
}
#endif
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 63af9a7ae51..afc2489ee13 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -836,6 +836,8 @@ static int __init meminfo_cmp(const void *_a, const void *_b)
void __init hyp_mode_check(void)
{
#ifdef CONFIG_ARM_VIRT_EXT
+ sync_boot_mode();
+
if (is_hyp_mode_available()) {
pr_info("CPU: All CPU(s) started in HYP mode.\n");
pr_info("CPU: Virtualization extensions available.\n");
@@ -971,6 +973,7 @@ static const char *hwcap_str[] = {
"vfpv4",
"idiva",
"idivt",
+ "vfpd32",
"lpae",
NULL
};
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 1c16c35c271..ab330422527 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -8,6 +8,7 @@
* published by the Free Software Foundation.
*/
#include <linux/errno.h>
+#include <linux/random.h>
#include <linux/signal.h>
#include <linux/personality.h>
#include <linux/uaccess.h>
@@ -15,12 +16,11 @@
#include <asm/elf.h>
#include <asm/cacheflush.h>
+#include <asm/traps.h>
#include <asm/ucontext.h>
#include <asm/unistd.h>
#include <asm/vfp.h>
-#include "signal.h"
-
/*
* For ARM syscalls, we encode the syscall number into the instruction.
*/
@@ -40,11 +40,13 @@
#define SWI_THUMB_SIGRETURN (0xdf00 << 16 | 0x2700 | (__NR_sigreturn - __NR_SYSCALL_BASE))
#define SWI_THUMB_RT_SIGRETURN (0xdf00 << 16 | 0x2700 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE))
-const unsigned long sigreturn_codes[7] = {
+static const unsigned long sigreturn_codes[7] = {
MOV_R7_NR_SIGRETURN, SWI_SYS_SIGRETURN, SWI_THUMB_SIGRETURN,
MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
};
+static unsigned long signal_return_offset;
+
#ifdef CONFIG_CRUNCH
static int preserve_crunch_context(struct crunch_sigframe __user *frame)
{
@@ -400,14 +402,20 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig,
__put_user(sigreturn_codes[idx+1], rc+1))
return 1;
- if ((cpsr & MODE32_BIT) && !IS_ENABLED(CONFIG_ARM_MPU)) {
+#ifdef CONFIG_MMU
+ if (cpsr & MODE32_BIT) {
+ struct mm_struct *mm = current->mm;
+
/*
- * 32-bit code can use the new high-page
- * signal return code support except when the MPU has
- * protected the vectors page from PL0
+ * 32-bit code can use the signal return page
+ * except when the MPU has protected the vectors
+ * page from PL0
*/
- retcode = KERN_SIGRETURN_CODE + (idx << 2) + thumb;
- } else {
+ retcode = mm->context.sigpage + signal_return_offset +
+ (idx << 2) + thumb;
+ } else
+#endif
+ {
/*
* Ensure that the instruction cache sees
* the return code written onto the stack.
@@ -608,3 +616,33 @@ do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall)
} while (thread_flags & _TIF_WORK_MASK);
return 0;
}
+
+struct page *get_signal_page(void)
+{
+ unsigned long ptr;
+ unsigned offset;
+ struct page *page;
+ void *addr;
+
+ page = alloc_pages(GFP_KERNEL, 0);
+
+ if (!page)
+ return NULL;
+
+ addr = page_address(page);
+
+ /* Give the signal return code some randomness */
+ offset = 0x200 + (get_random_int() & 0x7fc);
+ signal_return_offset = offset;
+
+ /*
+ * Copy signal return handlers into the vector page, and
+ * set sigreturn to be a pointer to these.
+ */
+ memcpy(addr + offset, sigreturn_codes, sizeof(sigreturn_codes));
+
+ ptr = (unsigned long)addr + offset;
+ flush_icache_range(ptr, ptr + sizeof(sigreturn_codes));
+
+ return page;
+}
diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h
deleted file mode 100644
index 5ff067b7c75..00000000000
--- a/arch/arm/kernel/signal.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * linux/arch/arm/kernel/signal.h
- *
- * Copyright (C) 2005-2009 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500)
-
-extern const unsigned long sigreturn_codes[7];
diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c
index a98b62dca2f..c2edfff573c 100644
--- a/arch/arm/kernel/smp_tlb.c
+++ b/arch/arm/kernel/smp_tlb.c
@@ -70,23 +70,6 @@ static inline void ipi_flush_bp_all(void *ignored)
local_flush_bp_all();
}
-#ifdef CONFIG_ARM_ERRATA_798181
-static int erratum_a15_798181(void)
-{
- unsigned int midr = read_cpuid_id();
-
- /* Cortex-A15 r0p0..r3p2 affected */
- if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2)
- return 0;
- return 1;
-}
-#else
-static int erratum_a15_798181(void)
-{
- return 0;
-}
-#endif
-
static void ipi_flush_tlb_a15_erratum(void *arg)
{
dmb();
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index cab094c234e..ab517fcce21 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -35,8 +35,6 @@
#include <asm/tls.h>
#include <asm/system_misc.h>
-#include "signal.h"
-
static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" };
void *vectors_page;
@@ -800,15 +798,26 @@ void __init trap_init(void)
return;
}
-static void __init kuser_get_tls_init(unsigned long vectors)
+#ifdef CONFIG_KUSER_HELPERS
+static void __init kuser_init(void *vectors)
{
+ extern char __kuser_helper_start[], __kuser_helper_end[];
+ int kuser_sz = __kuser_helper_end - __kuser_helper_start;
+
+ memcpy(vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz);
+
/*
* vectors + 0xfe0 = __kuser_get_tls
* vectors + 0xfe8 = hardware TLS instruction at 0xffff0fe8
*/
if (tls_emu || has_tls_reg)
- memcpy((void *)vectors + 0xfe0, (void *)vectors + 0xfe8, 4);
+ memcpy(vectors + 0xfe0, vectors + 0xfe8, 4);
}
+#else
+static void __init kuser_init(void *vectors)
+{
+}
+#endif
void __init early_trap_init(void *vectors_base)
{
@@ -816,33 +825,30 @@ void __init early_trap_init(void *vectors_base)
unsigned long vectors = (unsigned long)vectors_base;
extern char __stubs_start[], __stubs_end[];
extern char __vectors_start[], __vectors_end[];
- extern char __kuser_helper_start[], __kuser_helper_end[];
- int kuser_sz = __kuser_helper_end - __kuser_helper_start;
+ unsigned i;
vectors_page = vectors_base;
/*
+ * Poison the vectors page with an undefined instruction. This
+ * instruction is chosen to be undefined for both ARM and Thumb
+ * ISAs. The Thumb version is an undefined instruction with a
+ * branch back to the undefined instruction.
+ */
+ for (i = 0; i < PAGE_SIZE / sizeof(u32); i++)
+ ((u32 *)vectors_base)[i] = 0xe7fddef1;
+
+ /*
* Copy the vectors, stubs and kuser helpers (in entry-armv.S)
* into the vector page, mapped at 0xffff0000, and ensure these
* are visible to the instruction stream.
*/
memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start);
- memcpy((void *)vectors + 0x200, __stubs_start, __stubs_end - __stubs_start);
- memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz);
+ memcpy((void *)vectors + 0x1000, __stubs_start, __stubs_end - __stubs_start);
- /*
- * Do processor specific fixups for the kuser helpers
- */
- kuser_get_tls_init(vectors);
-
- /*
- * Copy signal return handlers into the vector page, and
- * set sigreturn to be a pointer to these.
- */
- memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE),
- sigreturn_codes, sizeof(sigreturn_codes));
+ kuser_init(vectors_base);
- flush_icache_range(vectors, vectors + PAGE_SIZE);
+ flush_icache_range(vectors, vectors + PAGE_SIZE * 2);
modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
#else /* ifndef CONFIG_CPU_V7M */
/*
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index fa25e4e425f..7bcee5c9b60 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -148,6 +148,23 @@ SECTIONS
. = ALIGN(PAGE_SIZE);
__init_begin = .;
#endif
+ /*
+ * The vectors and stubs are relocatable code, and the
+ * only thing that matters is their relative offsets
+ */
+ __vectors_start = .;
+ .vectors 0 : AT(__vectors_start) {
+ *(.vectors)
+ }
+ . = __vectors_start + SIZEOF(.vectors);
+ __vectors_end = .;
+
+ __stubs_start = .;
+ .stubs 0x1000 : AT(__stubs_start) {
+ *(.stubs)
+ }
+ . = __stubs_start + SIZEOF(.stubs);
+ __stubs_end = .;
INIT_TEXT_SECTION(8)
.exit.text : {
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index afbc439f11d..4cdb61c5445 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -505,7 +505,7 @@ static struct vpbe_output dm365evm_vpbe_outputs[] = {
/*
* Amplifiers on the board
*/
-struct ths7303_platform_data ths7303_pdata = {
+static struct ths7303_platform_data ths7303_pdata = {
.ch_1 = 3,
.ch_2 = 3,
.ch_3 = 3,
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 42ef53f62c6..86100d17969 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -860,7 +860,7 @@ static struct platform_device dm355_vpbe_display = {
},
};
-struct venc_platform_data dm355_venc_pdata = {
+static struct venc_platform_data dm355_venc_pdata = {
.setup_pinmux = dm355_vpbe_setup_pinmux,
.setup_clock = dm355_venc_setup_clock,
};
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index fa7af5eda52..dad28029ba9 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -1349,7 +1349,7 @@ static struct platform_device dm365_vpbe_display = {
},
};
-struct venc_platform_data dm365_venc_pdata = {
+static struct venc_platform_data dm365_venc_pdata = {
.setup_pinmux = dm365_vpbe_setup_pinmux,
.setup_clock = dm365_venc_setup_clock,
};
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 855d4a7b462..5952e68c76c 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -92,6 +92,7 @@ config SOC_EXYNOS5440
bool "SAMSUNG EXYNOS5440"
default y
depends on ARCH_EXYNOS5
+ select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_HAS_OPP
select HAVE_ARM_ARCH_TIMER
select AUTO_ZRELADDR
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index e970a7a4e27..53696154aea 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -14,7 +14,7 @@ obj- :=
obj-$(CONFIG_ARCH_EXYNOS) += common.o
-obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_S5P_PM) += pm.o
obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 164685bd25c..ba95e5db250 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -58,7 +58,6 @@ static const char name_exynos5440[] = "EXYNOS5440";
static void exynos4_map_io(void);
static void exynos5_map_io(void);
-static void exynos5440_map_io(void);
static int exynos_init(void);
static struct cpu_table cpu_ids[] __initdata = {
@@ -95,7 +94,6 @@ static struct cpu_table cpu_ids[] __initdata = {
}, {
.idcode = EXYNOS5440_SOC_ID,
.idmask = EXYNOS5_SOC_MASK,
- .map_io = exynos5440_map_io,
.init = exynos_init,
.name = name_exynos5440,
},
@@ -150,11 +148,6 @@ static struct map_desc exynos4_iodesc[] __initdata = {
.length = SZ_64K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(EXYNOS4_PA_UART),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
.length = SZ_128K,
@@ -268,20 +261,6 @@ static struct map_desc exynos5_iodesc[] __initdata = {
.pfn = __phys_to_pfn(EXYNOS5_PA_PMU),
.length = SZ_64K,
.type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(EXYNOS5_PA_UART),
- .length = SZ_512K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos5440_iodesc0[] __initdata = {
- {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(EXYNOS5440_PA_UART0),
- .length = SZ_512K,
- .type = MT_DEVICE,
},
};
@@ -388,11 +367,6 @@ static void __init exynos5_map_io(void)
iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
}
-static void __init exynos5440_map_io(void)
-{
- iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0));
-}
-
void __init exynos_init_time(void)
{
of_clk_init(NULL);
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 3e156bcddcb..972490fc09d 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -97,6 +97,5 @@ struct exynos_pmu_conf {
};
extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
-extern void s3c_cpu_resume(void);
#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index 17a18ff3d71..225ee8431c7 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -25,6 +25,7 @@
#include <mach/regs-pmu.h>
#include <plat/cpu.h>
+#include <plat/pm.h>
#include "common.h"
diff --git a/arch/arm/mach-exynos/include/mach/memory.h b/arch/arm/mach-exynos/include/mach/memory.h
index 374ef2cf715..2a4cdb7cb32 100644
--- a/arch/arm/mach-exynos/include/mach/memory.h
+++ b/arch/arm/mach-exynos/include/mach/memory.h
@@ -15,8 +15,13 @@
#define PLAT_PHYS_OFFSET UL(0x40000000)
+#ifndef CONFIG_ARM_LPAE
/* Maximum of 256MiB in one bank */
#define MAX_PHYSMEM_BITS 32
#define SECTION_SIZE_BITS 28
+#else
+#define MAX_PHYSMEM_BITS 36
+#define SECTION_SIZE_BITS 31
+#endif
#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 41c20692a13..c679db57726 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -217,6 +217,9 @@ static __init int exynos_pm_drvinit(void)
struct clk *pll_base;
unsigned int tmp;
+ if (soc_is_exynos5440())
+ return 0;
+
s3c_pm_init();
/* All wakeup disable */
@@ -340,6 +343,9 @@ static struct syscore_ops exynos_pm_syscore_ops = {
static __init int exynos_pm_syscore_init(void)
{
+ if (soc_is_exynos5440())
+ return 0;
+
register_syscore_ops(&exynos_pm_syscore_ops);
return 0;
}
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index a7cd2cf5e08..3490a24f969 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -276,8 +276,6 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys)
sys->mem_offset = DC21285_PCI_MEM;
- pci_ioremap_io(0, DC21285_PCI_IO);
-
pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset);
pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index dc5d6becd8c..88815795fe2 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -115,6 +115,7 @@ static int highbank_platform_notifier(struct notifier_block *nb,
{
struct resource *res;
int reg = -1;
+ u32 val;
struct device *dev = __dev;
if (event != BUS_NOTIFY_ADD_DEVICE)
@@ -141,10 +142,10 @@ static int highbank_platform_notifier(struct notifier_block *nb,
return NOTIFY_DONE;
if (of_property_read_bool(dev->of_node, "dma-coherent")) {
- writel(0xff31, sregs_base + reg);
+ val = readl(sregs_base + reg);
+ writel(val | 0xff01, sregs_base + reg);
set_dma_ops(dev, &arm_coherent_dma_ops);
- } else
- writel(0, sregs_base + reg);
+ }
return NOTIFY_OK;
}
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 4282e99f5ca..86567d980b0 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -199,7 +199,8 @@ static const char *pcie_axi_sels[] = { "axi", "ahb", };
static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", };
static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
-static const char *emi_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *emi_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", };
+static const char *emi_slow_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *vdo_axi_sels[] = { "axi", "ahb", };
static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
@@ -392,7 +393,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[usdhc4_sel] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
clk[enfc_sel] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels));
clk[emi_sel] = imx_clk_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels));
- clk[emi_slow_sel] = imx_clk_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_sels, ARRAY_SIZE(emi_sels));
+ clk[emi_slow_sel] = imx_clk_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels, ARRAY_SIZE(emi_slow_sels));
clk[vdo_axi_sel] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels));
clk[vpu_axi_sel] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels));
clk[cko1_sel] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c
index d617c0b7c80..b169a396d93 100644
--- a/arch/arm/mach-imx/clk-vf610.c
+++ b/arch/arm/mach-imx/clk-vf610.c
@@ -183,6 +183,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7);
clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24);
clk[VF610_CLK_ENET_TS] = imx_clk_gate("enet_ts", "enet_ts_sel", CCM_CSCDR1, 23);
+ clk[VF610_CLK_ENET0] = imx_clk_gate2("enet0", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(0));
+ clk[VF610_CLK_ENET1] = imx_clk_gate2("enet1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(1));
clk[VF610_CLK_PIT] = imx_clk_gate2("pit", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(7));
diff --git a/arch/arm/mach-imx/mx27.h b/arch/arm/mach-imx/mx27.h
index e074616d54c..8a65f192e7f 100644
--- a/arch/arm/mach-imx/mx27.h
+++ b/arch/arm/mach-imx/mx27.h
@@ -135,7 +135,7 @@
#define MX27_INT_GPT4 (NR_IRQS_LEGACY + 4)
#define MX27_INT_RTIC (NR_IRQS_LEGACY + 5)
#define MX27_INT_CSPI3 (NR_IRQS_LEGACY + 6)
-#define MX27_INT_SDHC (NR_IRQS_LEGACY + 7)
+#define MX27_INT_MSHC (NR_IRQS_LEGACY + 7)
#define MX27_INT_GPIO (NR_IRQS_LEGACY + 8)
#define MX27_INT_SDHC3 (NR_IRQS_LEGACY + 9)
#define MX27_INT_SDHC2 (NR_IRQS_LEGACY + 10)
diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c
index fe4d9ff93a7..b661c5c2870 100644
--- a/arch/arm/mach-keystone/keystone.c
+++ b/arch/arm/mach-keystone/keystone.c
@@ -49,7 +49,7 @@ static const char *keystone_match[] __initconst = {
NULL,
};
-void keystone_restart(char mode, const char *cmd)
+void keystone_restart(enum reboot_mode mode, const char *cmd)
{
u32 val;
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 627fa7e41fb..3eed0006d18 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -62,7 +62,7 @@ config SOC_OMAP5
select HAVE_SMP
select COMMON_CLK
select HAVE_ARM_ARCH_TIMER
- select ARM_ERRATA_798181
+ select ARM_ERRATA_798181 if SMP
config SOC_AM33XX
bool "AM33XX support"
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index e5fbfed69aa..be5d005ebad 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -15,6 +15,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/irqdomain.h>
+#include <linux/clk.h>
#include <asm/mach/arch.h>
@@ -35,6 +36,21 @@ static struct of_device_id omap_dt_match_table[] __initdata = {
{ }
};
+/*
+ * Create alias for USB host PHY clock.
+ * Remove this when clock phandle can be provided via DT
+ */
+static void __init legacy_init_ehci_clk(char *clkname)
+{
+ int ret;
+
+ ret = clk_add_alias("main_clk", NULL, clkname, NULL);
+ if (ret) {
+ pr_err("%s:Failed to add main_clk alias to %s :%d\n",
+ __func__, clkname, ret);
+ }
+}
+
static void __init omap_generic_init(void)
{
omap_sdrc_init(NULL, NULL);
@@ -45,10 +61,15 @@ static void __init omap_generic_init(void)
* HACK: call display setup code for selected boards to enable omapdss.
* This will be removed when omapdss supports DT.
*/
- if (of_machine_is_compatible("ti,omap4-panda"))
+ if (of_machine_is_compatible("ti,omap4-panda")) {
omap4_panda_display_init_of();
+ legacy_init_ehci_clk("auxclk3_ck");
+
+ }
else if (of_machine_is_compatible("ti,omap4-sdp"))
omap_4430sdp_display_init_of();
+ else if (of_machine_is_compatible("ti,omap5-uevm"))
+ legacy_init_ehci_clk("auxclk1_ck");
}
#ifdef CONFIG_SOC_OMAP2420
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index f6726bb4eb9..3a3362fa793 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -477,16 +477,24 @@ static int em_x270_usb_hub_init(void)
/* USB Hub power-on and reset */
gpio_direction_output(usb_hub_reset, 1);
gpio_direction_output(GPIO9_USB_VBUS_EN, 0);
- regulator_enable(em_x270_usb_ldo);
+ err = regulator_enable(em_x270_usb_ldo);
+ if (err)
+ goto err_free_rst_gpio;
+
gpio_set_value(usb_hub_reset, 0);
gpio_set_value(usb_hub_reset, 1);
regulator_disable(em_x270_usb_ldo);
- regulator_enable(em_x270_usb_ldo);
+ err = regulator_enable(em_x270_usb_ldo);
+ if (err)
+ goto err_free_rst_gpio;
+
gpio_set_value(usb_hub_reset, 0);
gpio_set_value(GPIO9_USB_VBUS_EN, 1);
return 0;
+err_free_rst_gpio:
+ gpio_free(usb_hub_reset);
err_free_vbus_gpio:
gpio_free(GPIO9_USB_VBUS_EN);
err_free_usb_ldo:
@@ -592,7 +600,7 @@ err_irq:
return err;
}
-static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
+static int em_x270_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
@@ -600,10 +608,11 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
- regulator_enable(em_x270_sdio_ldo);
+ return regulator_enable(em_x270_sdio_ldo);
} else {
regulator_disable(em_x270_sdio_ldo);
}
+ return 0;
}
static void em_x270_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index d2c65231837..dd70343c870 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -408,7 +408,7 @@ static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_in
return err;
}
-static void mainstone_mci_setpower(struct device *dev, unsigned int vdd)
+static int mainstone_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
@@ -420,6 +420,7 @@ static void mainstone_mci_setpower(struct device *dev, unsigned int vdd)
printk(KERN_DEBUG "%s: off\n", __func__);
MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON;
}
+ return 0;
}
static void mainstone_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index fb7f1d1627d..13e5b00eae9 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -335,7 +335,7 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
return err;
}
-static void pcm990_mci_setpower(struct device *dev, unsigned int vdd)
+static int pcm990_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data *p_d = dev->platform_data;
u8 val;
@@ -348,6 +348,7 @@ static void pcm990_mci_setpower(struct device *dev, unsigned int vdd)
val &= ~PCM990_CTRL_MMC2PWR;
pcm990_cpld_writeb(PCM990_CTRL_MMC2PWR, PCM990_CTRL_REG5);
+ return 0;
}
static void pcm990_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 711d37e26bd..aedf053a1de 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -258,7 +258,7 @@ err_free_2:
return err;
}
-static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
+static int poodle_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
@@ -270,6 +270,8 @@ static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
gpio_set_value(POODLE_GPIO_SD_PWR1, 0);
gpio_set_value(POODLE_GPIO_SD_PWR, 0);
}
+
+ return 0;
}
static void poodle_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 2125df0444e..4c29173026e 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -598,7 +598,7 @@ static inline void spitz_spi_init(void) {}
* NOTE: The card detect interrupt isn't debounced so we delay it by 250ms to
* give the card a chance to fully insert/eject.
*/
-static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
+static int spitz_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
@@ -606,6 +606,8 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, SCOOP_CPR_SD_3V);
else
spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, 0x0);
+
+ return 0;
}
static struct pxamci_platform_data spitz_mci_platform_data = {
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 88fde43c948..62aea3e835f 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -734,9 +734,10 @@ static int stargate2_mci_init(struct device *dev,
*
* Very simple control. Either it is on or off and is controlled by
* a gpio pin */
-static void stargate2_mci_setpower(struct device *dev, unsigned int vdd)
+static int stargate2_mci_setpower(struct device *dev, unsigned int vdd)
{
gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd);
+ return 0;
}
static void stargate2_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 6d9252e081c..7791ac76f94 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -208,7 +208,7 @@ config S3C24XX_GPIO_EXTRA128
config S3C24XX_PLL
bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
- depends on ARM_S3C24XX
+ depends on ARM_S3C24XX_CPUFREQ
help
Compile in support for changing the PLL frequency from the
S3C24XX series CPUfreq driver. The PLL takes time to settle
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c
index 34fffdf6fc1..564553694b5 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c
@@ -119,66 +119,101 @@ static struct clk init_clocks_off[] = {
}
};
-static struct clk init_clocks[] = {
- {
- .name = "lcd",
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_LCDC,
- }, {
- .name = "gpio",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_GPIO,
- }, {
- .name = "usb-host",
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_USBH,
- }, {
- .name = "usb-device",
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_USBD,
- }, {
- .name = "timers",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_PWMT,
- }, {
- .name = "uart",
- .devname = "s3c2410-uart.0",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_UART0,
- }, {
- .name = "uart",
- .devname = "s3c2410-uart.1",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_UART1,
- }, {
- .name = "uart",
- .devname = "s3c2410-uart.2",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_UART2,
- }, {
- .name = "rtc",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_RTC,
- }, {
- .name = "watchdog",
- .parent = &clk_p,
- .ctrlbit = 0,
- }, {
- .name = "usb-bus-host",
- .parent = &clk_usb_bus,
- }, {
- .name = "usb-bus-gadget",
- .parent = &clk_usb_bus,
- },
+static struct clk clk_lcd = {
+ .name = "lcd",
+ .parent = &clk_h,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_LCDC,
+};
+
+static struct clk clk_gpio = {
+ .name = "gpio",
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_GPIO,
+};
+
+static struct clk clk_usb_host = {
+ .name = "usb-host",
+ .parent = &clk_h,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_USBH,
+};
+
+static struct clk clk_usb_device = {
+ .name = "usb-device",
+ .parent = &clk_h,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_USBD,
+};
+
+static struct clk clk_timers = {
+ .name = "timers",
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_PWMT,
+};
+
+struct clk s3c24xx_clk_uart0 = {
+ .name = "uart",
+ .devname = "s3c2410-uart.0",
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_UART0,
+};
+
+struct clk s3c24xx_clk_uart1 = {
+ .name = "uart",
+ .devname = "s3c2410-uart.1",
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_UART1,
+};
+
+struct clk s3c24xx_clk_uart2 = {
+ .name = "uart",
+ .devname = "s3c2410-uart.2",
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_UART2,
+};
+
+static struct clk clk_rtc = {
+ .name = "rtc",
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_RTC,
+};
+
+static struct clk clk_watchdog = {
+ .name = "watchdog",
+ .parent = &clk_p,
+ .ctrlbit = 0,
+};
+
+static struct clk clk_usb_bus_host = {
+ .name = "usb-bus-host",
+ .parent = &clk_usb_bus,
+};
+
+static struct clk clk_usb_bus_gadget = {
+ .name = "usb-bus-gadget",
+ .parent = &clk_usb_bus,
+};
+
+static struct clk *init_clocks[] = {
+ &clk_lcd,
+ &clk_gpio,
+ &clk_usb_host,
+ &clk_usb_device,
+ &clk_timers,
+ &s3c24xx_clk_uart0,
+ &s3c24xx_clk_uart1,
+ &s3c24xx_clk_uart2,
+ &clk_rtc,
+ &clk_watchdog,
+ &clk_usb_bus_host,
+ &clk_usb_bus_gadget,
};
/* s3c2410_baseclk_add()
@@ -195,7 +230,6 @@ int __init s3c2410_baseclk_add(void)
{
unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
- struct clk *clkp;
struct clk *xtal;
int ret;
int ptr;
@@ -207,8 +241,9 @@ int __init s3c2410_baseclk_add(void)
/* register clocks from clock array */
- clkp = init_clocks;
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) {
+ struct clk *clkp = init_clocks[ptr];
+
/* ensure that we note the clock state */
clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c
index 1069b568082..aaf006d1d6d 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2440.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c
@@ -166,6 +166,9 @@ static struct clk_lookup s3c2440_clk_lookup[] = {
CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
+ CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0),
+ CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1),
+ CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2),
CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll),
};
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index d04e3bfe191..835833e3c4f 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -11,8 +11,9 @@ menuconfig ARCH_STI
select HAVE_SMP
select HAVE_ARM_SCU if SMP
select ARCH_REQUIRE_GPIOLIB
- select ARM_ERRATA_720789
select ARM_ERRATA_754322
+ select ARM_ERRATA_764369
+ select ARM_ERRATA_775420
select PL310_ERRATA_753970 if CACHE_PL310
select PL310_ERRATA_769419 if CACHE_PL310
help
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 5b799c29886..5f252569c68 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -91,7 +91,7 @@ static void __init zynq_map_io(void)
zynq_scu_map_io();
}
-static void zynq_system_reset(char mode, const char *cmd)
+static void zynq_system_reset(enum reboot_mode mode, const char *cmd)
{
zynq_slcr_system_reset();
}
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 6cacdc8dd65..db5c2cab8fd 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -421,24 +421,28 @@ config CPU_32v3
select CPU_USE_DOMAINS if MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select TLS_REG_EMUL if SMP || !MMU
+ select NEED_KUSER_HELPERS
config CPU_32v4
bool
select CPU_USE_DOMAINS if MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select TLS_REG_EMUL if SMP || !MMU
+ select NEED_KUSER_HELPERS
config CPU_32v4T
bool
select CPU_USE_DOMAINS if MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select TLS_REG_EMUL if SMP || !MMU
+ select NEED_KUSER_HELPERS
config CPU_32v5
bool
select CPU_USE_DOMAINS if MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select TLS_REG_EMUL if SMP || !MMU
+ select NEED_KUSER_HELPERS
config CPU_32v6
bool
@@ -776,6 +780,7 @@ config CPU_BPREDICT_DISABLE
config TLS_REG_EMUL
bool
+ select NEED_KUSER_HELPERS
help
An SMP system using a pre-ARMv6 processor (there are apparently
a few prototypes like that in existence) and therefore access to
@@ -783,11 +788,40 @@ config TLS_REG_EMUL
config NEEDS_SYSCALL_FOR_CMPXCHG
bool
+ select NEED_KUSER_HELPERS
help
SMP on a pre-ARMv6 processor? Well OK then.
Forget about fast user space cmpxchg support.
It is just not possible.
+config NEED_KUSER_HELPERS
+ bool
+
+config KUSER_HELPERS
+ bool "Enable kuser helpers in vector page" if !NEED_KUSER_HELPERS
+ default y
+ help
+ Warning: disabling this option may break user programs.
+
+ Provide kuser helpers in the vector page. The kernel provides
+ helper code to userspace in read only form at a fixed location
+ in the high vector page to allow userspace to be independent of
+ the CPU type fitted to the system. This permits binaries to be
+ run on ARMv4 through to ARMv7 without modification.
+
+ However, the fixed address nature of these helpers can be used
+ by ROP (return orientated programming) authors when creating
+ exploits.
+
+ If all of the binaries and libraries which run on your platform
+ are built specifically for your platform, and make no use of
+ these helpers, then you can turn this option off. However,
+ when such an binary or library is run, it will receive a SIGILL
+ signal, which will terminate the program.
+
+ Say N here only if you are absolutely certain that you do not
+ need these helpers; otherwise, the safe option is to say Y.
+
config DMA_CACHE_RWFO
bool "Enable read/write for ownership DMA cache maintenance"
depends on CPU_V6K && SMP
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index b55b1015724..4a0544492f1 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -245,7 +245,8 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk)
if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) {
local_flush_bp_all();
local_flush_tlb_all();
- dummy_flush_tlb_a15_erratum();
+ if (erratum_a15_798181())
+ dummy_flush_tlb_a15_erratum();
}
atomic64_set(&per_cpu(active_asids, cpu), asid);
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 4f56617a239..53cdbd39ec8 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -989,6 +989,7 @@ phys_addr_t arm_lowmem_limit __initdata = 0;
void __init sanity_check_meminfo(void)
{
+ phys_addr_t memblock_limit = 0;
int i, j, highmem = 0;
phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1;
@@ -1052,9 +1053,32 @@ void __init sanity_check_meminfo(void)
bank->size = size_limit;
}
#endif
- if (!bank->highmem && bank->start + bank->size > arm_lowmem_limit)
- arm_lowmem_limit = bank->start + bank->size;
+ if (!bank->highmem) {
+ phys_addr_t bank_end = bank->start + bank->size;
+ if (bank_end > arm_lowmem_limit)
+ arm_lowmem_limit = bank_end;
+
+ /*
+ * Find the first non-section-aligned page, and point
+ * memblock_limit at it. This relies on rounding the
+ * limit down to be section-aligned, which happens at
+ * the end of this function.
+ *
+ * With this algorithm, the start or end of almost any
+ * bank can be non-section-aligned. The only exception
+ * is that the start of the bank 0 must be section-
+ * aligned, since otherwise memory would need to be
+ * allocated when mapping the start of bank 0, which
+ * occurs before any free memory is mapped.
+ */
+ if (!memblock_limit) {
+ if (!IS_ALIGNED(bank->start, SECTION_SIZE))
+ memblock_limit = bank->start;
+ else if (!IS_ALIGNED(bank_end, SECTION_SIZE))
+ memblock_limit = bank_end;
+ }
+ }
j++;
}
#ifdef CONFIG_HIGHMEM
@@ -1079,7 +1103,18 @@ void __init sanity_check_meminfo(void)
#endif
meminfo.nr_banks = j;
high_memory = __va(arm_lowmem_limit - 1) + 1;
- memblock_set_current_limit(arm_lowmem_limit);
+
+ /*
+ * Round the memblock limit down to a section size. This
+ * helps to ensure that we will allocate memory from the
+ * last full section, which should be mapped.
+ */
+ if (memblock_limit)
+ memblock_limit = round_down(memblock_limit, SECTION_SIZE);
+ if (!memblock_limit)
+ memblock_limit = arm_lowmem_limit;
+
+ memblock_set_current_limit(memblock_limit);
}
static inline void prepare_page_table(void)
@@ -1160,7 +1195,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
/*
* Allocate the vector page early.
*/
- vectors = early_alloc(PAGE_SIZE);
+ vectors = early_alloc(PAGE_SIZE * 2);
early_trap_init(vectors);
@@ -1205,15 +1240,27 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
map.pfn = __phys_to_pfn(virt_to_phys(vectors));
map.virtual = 0xffff0000;
map.length = PAGE_SIZE;
+#ifdef CONFIG_KUSER_HELPERS
map.type = MT_HIGH_VECTORS;
+#else
+ map.type = MT_LOW_VECTORS;
+#endif
create_mapping(&map);
if (!vectors_high()) {
map.virtual = 0;
+ map.length = PAGE_SIZE * 2;
map.type = MT_LOW_VECTORS;
create_mapping(&map);
}
+ /* Now create a kernel read-only mapping */
+ map.pfn += 1;
+ map.virtual = 0xffff0000 + PAGE_SIZE;
+ map.length = PAGE_SIZE;
+ map.type = MT_LOW_VECTORS;
+ create_mapping(&map);
+
/*
* Ask the machine support to map in the statically mapped devices.
*/
@@ -1276,8 +1323,6 @@ void __init paging_init(struct machine_desc *mdesc)
{
void *zero_page;
- memblock_set_current_limit(arm_lowmem_limit);
-
build_mem_type_table();
prepare_page_table();
map_lowmem();
diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S
index f64afb9f1bd..bdd3be4be77 100644
--- a/arch/arm/mm/proc-v7-2level.S
+++ b/arch/arm/mm/proc-v7-2level.S
@@ -110,7 +110,7 @@ ENTRY(cpu_v7_set_pte_ext)
ARM( str r3, [r0, #2048]! )
THUMB( add r0, r0, #2048 )
THUMB( str r3, [r0] )
- ALT_SMP(mov pc,lr)
+ ALT_SMP(W(nop))
ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte
#endif
mov pc, lr
diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S
index c36ac69488c..01a719e18bb 100644
--- a/arch/arm/mm/proc-v7-3level.S
+++ b/arch/arm/mm/proc-v7-3level.S
@@ -81,7 +81,7 @@ ENTRY(cpu_v7_set_pte_ext)
tst r3, #1 << (55 - 32) @ L_PTE_DIRTY
orreq r2, #L_PTE_RDONLY
1: strd r2, r3, [r0]
- ALT_SMP(mov pc, lr)
+ ALT_SMP(W(nop))
ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte
#endif
mov pc, lr
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 5c6d5a3050e..73398bcf9bd 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -75,13 +75,14 @@ ENTRY(cpu_v7_do_idle)
ENDPROC(cpu_v7_do_idle)
ENTRY(cpu_v7_dcache_clean_area)
- ALT_SMP(mov pc, lr) @ MP extensions imply L1 PTW
- ALT_UP(W(nop))
- dcache_line_size r2, r3
-1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ ALT_SMP(W(nop)) @ MP extensions imply L1 PTW
+ ALT_UP_B(1f)
+ mov pc, lr
+1: dcache_line_size r2, r3
+2: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, r2
subs r1, r1, r2
- bhi 1b
+ bhi 2b
dsb
mov pc, lr
ENDPROC(cpu_v7_dcache_clean_area)
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 3dc5cbea86c..a5b5ff6e68d 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -29,6 +29,13 @@ config PLAT_S5P
help
Base platform code for Samsung's S5P series SoC.
+config SAMSUNG_PM
+ bool
+ depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || S5P_PM)
+ default y
+ help
+ Base platform power management code for samsung code
+
if PLAT_SAMSUNG
# boot configurations
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 98d07d8fc7a..199bbe304d0 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -51,7 +51,7 @@ obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o
# PM support
-obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_SAMSUNG_PM) += pm.o
obj-$(CONFIG_SAMSUNG_PM_GPIO) += pm-gpio.o
obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o
diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
index a62753dc15b..df45d6edc98 100644
--- a/arch/arm/plat-samsung/include/plat/clock.h
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -83,6 +83,11 @@ extern struct clk clk_ext;
extern struct clksrc_clk clk_epllref;
extern struct clksrc_clk clk_esysclk;
+/* S3C24XX UART clocks */
+extern struct clk s3c24xx_clk_uart0;
+extern struct clk s3c24xx_clk_uart1;
+extern struct clk s3c24xx_clk_uart2;
+
/* S3C64XX specific clocks */
extern struct clk clk_h2;
extern struct clk clk_27m;
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index 5d47ca35cab..6bc1a8f471e 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -19,7 +19,7 @@
struct device;
-#ifdef CONFIG_PM
+#ifdef CONFIG_SAMSUNG_PM
extern __init int s3c_pm_init(void);
extern __init int s3c64xx_pm_init(void);
@@ -58,8 +58,6 @@ extern unsigned char pm_uart_udivslot; /* true to save UART UDIVSLOT */
/* from sleep.S */
-extern void s3c_cpu_resume(void);
-
extern int s3c2410_cpu_suspend(unsigned long);
/* sleep save info */
@@ -106,12 +104,14 @@ extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
extern void s3c_pm_do_restore(struct sleep_save *ptr, int count);
extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count);
-#ifdef CONFIG_PM
+#ifdef CONFIG_SAMSUNG_PM
extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
+extern void s3c_cpu_resume(void);
#else
#define s3c_irq_wake NULL
#define s3c_irqext_wake NULL
+#define s3c_cpu_resume NULL
#endif
/* PM debug functions */
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index ea361364245..d0c23010b69 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -80,7 +80,7 @@ unsigned char pm_uart_udivslot;
#ifdef CONFIG_SAMSUNG_PM_DEBUG
-static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
+static struct pm_uart_save uart_save;
static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
{
@@ -101,11 +101,7 @@ static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
static void s3c_pm_save_uarts(void)
{
- struct pm_uart_save *save = uart_save;
- unsigned int uart;
-
- for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
- s3c_pm_save_uart(uart, save);
+ s3c_pm_save_uart(CONFIG_DEBUG_S3C_UART, &uart_save);
}
static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
@@ -126,11 +122,7 @@ static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
static void s3c_pm_restore_uarts(void)
{
- struct pm_uart_save *save = uart_save;
- unsigned int uart;
-
- for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
- s3c_pm_restore_uart(uart, save);
+ s3c_pm_restore_uart(CONFIG_DEBUG_S3C_UART, &uart_save);
}
#else
static void s3c_pm_save_uarts(void) { }
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index f71c37edca2..c9770ba5c7d 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -172,7 +172,7 @@ static void __init xen_percpu_init(void *unused)
enable_percpu_irq(xen_events_irq, 0);
}
-static void xen_restart(char str, const char *cmd)
+static void xen_restart(enum reboot_mode reboot_mode, const char *cmd)
{
struct sched_shutdown r = { .reason = SHUTDOWN_reboot };
int rc;
diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h
index ef8235c68c0..a2232d07be9 100644
--- a/arch/arm64/include/asm/debug-monitors.h
+++ b/arch/arm64/include/asm/debug-monitors.h
@@ -83,14 +83,7 @@ static inline int reinstall_suspended_bps(struct pt_regs *regs)
}
#endif
-#ifdef CONFIG_COMPAT
int aarch32_break_handler(struct pt_regs *regs);
-#else
-static int aarch32_break_handler(struct pt_regs *regs)
-{
- return -EFAULT;
-}
-#endif
#endif /* __ASSEMBLY */
#endif /* __KERNEL__ */
diff --git a/arch/arm64/include/asm/system_misc.h b/arch/arm64/include/asm/system_misc.h
index a6e1750369e..7a18fabbe0f 100644
--- a/arch/arm64/include/asm/system_misc.h
+++ b/arch/arm64/include/asm/system_misc.h
@@ -23,6 +23,7 @@
#include <linux/compiler.h>
#include <linux/linkage.h>
#include <linux/irqflags.h>
+#include <linux/reboot.h>
struct pt_regs;
@@ -41,7 +42,7 @@ extern void show_pte(struct mm_struct *mm, unsigned long addr);
extern void __show_regs(struct pt_regs *);
void soft_restart(unsigned long);
-extern void (*arm_pm_restart)(char str, const char *cmd);
+extern void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd);
#define UDBG_UNDEFINED (1 << 0)
#define UDBG_SYSCALL (1 << 1)
diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
index 3659e460071..23a3c4791d8 100644
--- a/arch/arm64/include/asm/thread_info.h
+++ b/arch/arm64/include/asm/thread_info.h
@@ -24,10 +24,10 @@
#include <linux/compiler.h>
#ifndef CONFIG_ARM64_64K_PAGES
-#define THREAD_SIZE_ORDER 1
+#define THREAD_SIZE_ORDER 2
#endif
-#define THREAD_SIZE 8192
+#define THREAD_SIZE 16384
#define THREAD_START_SP (THREAD_SIZE - 16)
#ifndef __ASSEMBLY__
diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h
index 439827271e3..26e310c5434 100644
--- a/arch/arm64/include/asm/virt.h
+++ b/arch/arm64/include/asm/virt.h
@@ -21,6 +21,7 @@
#define BOOT_CPU_MODE_EL2 (0x0e12b007)
#ifndef __ASSEMBLY__
+#include <asm/cacheflush.h>
/*
* __boot_cpu_mode records what mode CPUs were booted in.
@@ -36,9 +37,20 @@ extern u32 __boot_cpu_mode[2];
void __hyp_set_vectors(phys_addr_t phys_vector_base);
phys_addr_t __hyp_get_vectors(void);
+static inline void sync_boot_mode(void)
+{
+ /*
+ * As secondaries write to __boot_cpu_mode with caches disabled, we
+ * must flush the corresponding cache entries to ensure the visibility
+ * of their writes.
+ */
+ __flush_dcache_area(__boot_cpu_mode, sizeof(__boot_cpu_mode));
+}
+
/* Reports the availability of HYP mode */
static inline bool is_hyp_mode_available(void)
{
+ sync_boot_mode();
return (__boot_cpu_mode[0] == BOOT_CPU_MODE_EL2 &&
__boot_cpu_mode[1] == BOOT_CPU_MODE_EL2);
}
@@ -46,6 +58,7 @@ static inline bool is_hyp_mode_available(void)
/* Check if the bootloader has booted CPUs in different modes */
static inline bool is_hyp_mode_mismatched(void)
{
+ sync_boot_mode();
return __boot_cpu_mode[0] != __boot_cpu_mode[1];
}
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 1d1314280a0..6ad781b21c0 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -121,7 +121,7 @@
.macro get_thread_info, rd
mov \rd, sp
- and \rd, \rd, #~((1 << 13) - 1) // top of 8K stack
+ and \rd, \rd, #~(THREAD_SIZE - 1) // top of stack
.endm
/*
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 46f02c3b501..57fb55c44c9 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -81,7 +81,7 @@ void soft_restart(unsigned long addr)
void (*pm_power_off)(void);
EXPORT_SYMBOL_GPL(pm_power_off);
-void (*arm_pm_restart)(char str, const char *cmd);
+void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd);
EXPORT_SYMBOL_GPL(arm_pm_restart);
void arch_cpu_idle_prepare(void)
@@ -132,7 +132,7 @@ void machine_restart(char *cmd)
/* Now call the architecture specific reboot code. */
if (arm_pm_restart)
- arm_pm_restart('h', cmd);
+ arm_pm_restart(reboot_mode, cmd);
/*
* Whoops - the architecture was unable to reboot.
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 4a053b3d172..fee5cce8345 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -200,13 +200,6 @@ asmlinkage void secondary_start_kernel(void)
raw_spin_unlock(&boot_lock);
/*
- * Enable local interrupts.
- */
- notify_cpu_starting(cpu);
- local_irq_enable();
- local_fiq_enable();
-
- /*
* OK, now it's safe to let the boot CPU continue. Wait for
* the CPU migration code to notice that the CPU is online
* before we continue.
@@ -215,6 +208,14 @@ asmlinkage void secondary_start_kernel(void)
complete(&cpu_running);
/*
+ * Enable GIC and timers.
+ */
+ notify_cpu_starting(cpu);
+
+ local_irq_enable();
+ local_fiq_enable();
+
+ /*
* OK, it's off to the idle thread for us
*/
cpu_startup_entry(CPUHP_ONLINE);
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index 0ecac8980aa..6c8ba25bf6b 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -152,25 +152,8 @@ void do_bad_area(unsigned long addr, unsigned int esr, struct pt_regs *regs)
#define ESR_CM (1 << 8)
#define ESR_LNX_EXEC (1 << 24)
-/*
- * Check that the permissions on the VMA allow for the fault which occurred.
- * If we encountered a write fault, we must have write permission, otherwise
- * we allow any permission.
- */
-static inline bool access_error(unsigned int esr, struct vm_area_struct *vma)
-{
- unsigned int mask = VM_READ | VM_WRITE | VM_EXEC;
-
- if (esr & ESR_WRITE)
- mask = VM_WRITE;
- if (esr & ESR_LNX_EXEC)
- mask = VM_EXEC;
-
- return vma->vm_flags & mask ? false : true;
-}
-
static int __do_page_fault(struct mm_struct *mm, unsigned long addr,
- unsigned int esr, unsigned int flags,
+ unsigned int mm_flags, unsigned long vm_flags,
struct task_struct *tsk)
{
struct vm_area_struct *vma;
@@ -188,12 +171,17 @@ static int __do_page_fault(struct mm_struct *mm, unsigned long addr,
* it.
*/
good_area:
- if (access_error(esr, vma)) {
+ /*
+ * Check that the permissions on the VMA allow for the fault which
+ * occurred. If we encountered a write or exec fault, we must have
+ * appropriate permissions, otherwise we allow any permission.
+ */
+ if (!(vma->vm_flags & vm_flags)) {
fault = VM_FAULT_BADACCESS;
goto out;
}
- return handle_mm_fault(mm, vma, addr & PAGE_MASK, flags);
+ return handle_mm_fault(mm, vma, addr & PAGE_MASK, mm_flags);
check_stack:
if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr))
@@ -208,9 +196,15 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr,
struct task_struct *tsk;
struct mm_struct *mm;
int fault, sig, code;
- bool write = (esr & ESR_WRITE) && !(esr & ESR_CM);
- unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
- (write ? FAULT_FLAG_WRITE : 0);
+ unsigned long vm_flags = VM_READ | VM_WRITE | VM_EXEC;
+ unsigned int mm_flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
+
+ if (esr & ESR_LNX_EXEC) {
+ vm_flags = VM_EXEC;
+ } else if ((esr & ESR_WRITE) && !(esr & ESR_CM)) {
+ vm_flags = VM_WRITE;
+ mm_flags |= FAULT_FLAG_WRITE;
+ }
tsk = current;
mm = tsk->mm;
@@ -248,7 +242,7 @@ retry:
#endif
}
- fault = __do_page_fault(mm, addr, esr, flags, tsk);
+ fault = __do_page_fault(mm, addr, mm_flags, vm_flags, tsk);
/*
* If we need to retry but a fatal signal is pending, handle the
@@ -265,7 +259,7 @@ retry:
*/
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
- if (flags & FAULT_FLAG_ALLOW_RETRY) {
+ if (mm_flags & FAULT_FLAG_ALLOW_RETRY) {
if (fault & VM_FAULT_MAJOR) {
tsk->maj_flt++;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs,
@@ -280,7 +274,7 @@ retry:
* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk of
* starvation.
*/
- flags &= ~FAULT_FLAG_ALLOW_RETRY;
+ mm_flags &= ~FAULT_FLAG_ALLOW_RETRY;
goto retry;
}
}
diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig
index 7913695b2fc..efbd2929aeb 100644
--- a/arch/ia64/configs/generic_defconfig
+++ b/arch/ia64/configs/generic_defconfig
@@ -31,7 +31,7 @@ CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_CONTAINER=m
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_PACKET=y
CONFIG_UNIX=y
diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig
index f8e91336542..f64980dd20c 100644
--- a/arch/ia64/configs/gensparse_defconfig
+++ b/arch/ia64/configs/gensparse_defconfig
@@ -25,7 +25,7 @@ CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_CONTAINER=m
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_PACKET=y
CONFIG_UNIX=y
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index a5a9e02e60a..0f4e9e41f13 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -31,7 +31,7 @@ CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_CONTAINER=m
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_PACKET=y
CONFIG_UNIX=y
diff --git a/arch/ia64/configs/xen_domu_defconfig b/arch/ia64/configs/xen_domu_defconfig
index 37b9b422caa..b025acfde5c 100644
--- a/arch/ia64/configs/xen_domu_defconfig
+++ b/arch/ia64/configs/xen_domu_defconfig
@@ -32,7 +32,7 @@ CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_CONTAINER=m
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_PACKET=y
CONFIG_UNIX=y
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 4758a8fd3e9..e12764c2a9d 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -114,6 +114,7 @@ config BCM47XX
select FW_CFE
select HW_HAS_PCI
select IRQ_CPU
+ select SYS_HAS_CPU_MIPS32_R1
select NO_EXCEPT_FILL
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -1702,6 +1703,7 @@ endchoice
config KVM_GUEST
bool "KVM Guest Kernel"
+ depends on BROKEN_ON_SMP
help
Select this option if building a guest kernel for KVM (Trap & Emulate) mode
diff --git a/arch/mips/bcm47xx/Kconfig b/arch/mips/bcm47xx/Kconfig
index ba611927749..2b8b118398c 100644
--- a/arch/mips/bcm47xx/Kconfig
+++ b/arch/mips/bcm47xx/Kconfig
@@ -2,7 +2,6 @@ if BCM47XX
config BCM47XX_SSB
bool "SSB Support for Broadcom BCM47XX"
- select SYS_HAS_CPU_MIPS32_R1
select SSB
select SSB_DRIVER_MIPS
select SSB_DRIVER_EXTIF
diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index 7b746e7bf7a..1830874ff1e 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -334,9 +334,10 @@ static void __init octeon_fdt_pip_iface(int pip, int idx, u64 *pmac)
char name_buffer[20];
int iface;
int p;
- int count;
+ int count = 0;
- count = cvmx_helper_interface_enumerate(idx);
+ if (cvmx_helper_interface_enumerate(idx) == 0)
+ count = cvmx_helper_ports_on_interface(idx);
snprintf(name_buffer, sizeof(name_buffer), "interface@%d", idx);
iface = fdt_subnode_offset(initial_boot_params, pip, name_buffer);
diff --git a/arch/mips/include/asm/mach-generic/spaces.h b/arch/mips/include/asm/mach-generic/spaces.h
index 5b2f2e68e57..9488fa5f886 100644
--- a/arch/mips/include/asm/mach-generic/spaces.h
+++ b/arch/mips/include/asm/mach-generic/spaces.h
@@ -25,8 +25,12 @@
#else
#define CAC_BASE _AC(0x80000000, UL)
#endif
+#ifndef IO_BASE
#define IO_BASE _AC(0xa0000000, UL)
+#endif
+#ifndef UNCAC_BASE
#define UNCAC_BASE _AC(0xa0000000, UL)
+#endif
#ifndef MAP_BASE
#ifdef CONFIG_KVM_GUEST
diff --git a/arch/mips/include/uapi/asm/siginfo.h b/arch/mips/include/uapi/asm/siginfo.h
index b7a23064841..88e292b7719 100644
--- a/arch/mips/include/uapi/asm/siginfo.h
+++ b/arch/mips/include/uapi/asm/siginfo.h
@@ -25,11 +25,12 @@ struct siginfo;
/*
* Careful to keep union _sifields from shifting ...
*/
-#if __SIZEOF_LONG__ == 4
+#if _MIPS_SZLONG == 32
#define __ARCH_SI_PREAMBLE_SIZE (3 * sizeof(int))
-#endif
-#if __SIZEOF_LONG__ == 8
+#elif _MIPS_SZLONG == 64
#define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int))
+#else
+#error _MIPS_SZLONG neither 32 nor 64
#endif
#include <asm-generic/siginfo.h>
diff --git a/arch/mips/kernel/bmips_vec.S b/arch/mips/kernel/bmips_vec.S
index f739aedcb50..bd79c4f9bff 100644
--- a/arch/mips/kernel/bmips_vec.S
+++ b/arch/mips/kernel/bmips_vec.S
@@ -54,7 +54,11 @@ LEAF(bmips_smp_movevec)
/* set up CPU1 CBR; move BASE to 0xa000_0000 */
li k0, 0xff400000
mtc0 k0, $22, 6
- li k1, CKSEG1 | BMIPS_RELO_VECTOR_CONTROL_1
+ /* set up relocation vector address based on thread ID */
+ mfc0 k1, $22, 3
+ srl k1, 16
+ andi k1, 0x8000
+ or k1, CKSEG1 | BMIPS_RELO_VECTOR_CONTROL_0
or k0, k1
li k1, 0xa0080000
sw k1, 0(k0)
diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c
index 76f31353e71..159abc8842d 100644
--- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c
@@ -79,15 +79,9 @@ static void __init bmips_smp_setup(void)
* MIPS interrupts 0,1 (SW INT 0,1) cross over to the other thread
* MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
* MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
- *
- * If booting from TP1, leave the existing CMT interrupt routing
- * such that TP0 responds to SW1 and TP1 responds to SW0.
*/
- if (boot_cpu == 0)
- change_c0_brcm_cmt_intr(0xf8018000,
+ change_c0_brcm_cmt_intr(0xf8018000,
(0x02 << 27) | (0x03 << 15));
- else
- change_c0_brcm_cmt_intr(0xf8018000, (0x1d << 27));
/* single core, 2 threads (2 pipelines) */
max_cpus = 2;
@@ -173,7 +167,7 @@ static void bmips_boot_secondary(int cpu, struct task_struct *idle)
else {
#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
/* Reset slave TP1 if booting from TP0 */
- if (cpu_logical_map(cpu) == 0)
+ if (cpu_logical_map(cpu) == 1)
set_c0_brcm_cmt_ctrl(0x01);
#elif defined(CONFIG_CPU_BMIPS5000)
if (cpu & 0x01)
@@ -202,9 +196,15 @@ static void bmips_init_secondary(void)
#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
void __iomem *cbr = BMIPS_GET_CBR();
unsigned long old_vec;
+ unsigned long relo_vector;
+ int boot_cpu;
+
+ boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
+ relo_vector = boot_cpu ? BMIPS_RELO_VECTOR_CONTROL_0 :
+ BMIPS_RELO_VECTOR_CONTROL_1;
- old_vec = __raw_readl(cbr + BMIPS_RELO_VECTOR_CONTROL_1);
- __raw_writel(old_vec & ~0x20000000, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
+ old_vec = __raw_readl(cbr + relo_vector);
+ __raw_writel(old_vec & ~0x20000000, cbr + relo_vector);
clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
#elif defined(CONFIG_CPU_BMIPS5000)
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index c89568f88bf..aec3408edd4 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1242,7 +1242,6 @@ asmlinkage void do_mcheck(struct pt_regs *regs)
panic("Caught Machine Check exception - %scaused by multiple "
"matching entries in the TLB.",
(multi_match) ? "" : "not ");
- exception_exit(prev_state);
}
asmlinkage void do_mt(struct pt_regs *regs)
diff --git a/arch/mips/kvm/Kconfig b/arch/mips/kvm/Kconfig
index 2c15590e55f..30e334e823b 100644
--- a/arch/mips/kvm/Kconfig
+++ b/arch/mips/kvm/Kconfig
@@ -5,7 +5,6 @@ source "virt/kvm/Kconfig"
menuconfig VIRTUALIZATION
bool "Virtualization"
- depends on HAVE_KVM
---help---
Say Y here to get to see options for using your Linux host to run
other operating systems inside virtual machines (guests).
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 34fce2b2095..556cb481577 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -1456,7 +1456,7 @@ static void build_r4000_setup_pgd(void)
{
const int a0 = 4;
const int a1 = 5;
- u32 *p = tlbmiss_handler_setup_pgd_array;
+ u32 *p = tlbmiss_handler_setup_pgd;
const int tlbmiss_handler_setup_pgd_size =
tlbmiss_handler_setup_pgd_end - tlbmiss_handler_setup_pgd;
struct uasm_label *l = labels;
@@ -1793,7 +1793,7 @@ static void build_r3000_tlb_store_handler(void)
uasm_i_j(&p, (unsigned long)tlb_do_page_fault_1 & 0x0fffffff);
uasm_i_nop(&p);
- if (p >= handle_tlbs)
+ if (p >= handle_tlbs_end)
panic("TLB store handler fastpath space exceeded");
uasm_resolve_relocs(relocs, labels);
diff --git a/arch/mips/netlogic/common/irq.c b/arch/mips/netlogic/common/irq.c
index 73facb2b33b..1c7e3a1b81a 100644
--- a/arch/mips/netlogic/common/irq.c
+++ b/arch/mips/netlogic/common/irq.c
@@ -40,6 +40,10 @@
#include <linux/slab.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
#include <asm/errno.h>
#include <asm/signal.h>
#include <asm/ptrace.h>
@@ -223,17 +227,6 @@ static void nlm_init_node_irqs(int node)
nodep->irqmask = irqmask;
}
-void __init arch_init_irq(void)
-{
- /* Initialize the irq descriptors */
- nlm_init_percpu_irqs();
- nlm_init_node_irqs(0);
- write_c0_eimr(nlm_current_node()->irqmask);
-#if defined(CONFIG_CPU_XLR)
- nlm_setup_fmn_irq();
-#endif
-}
-
void nlm_smp_irq_init(int hwcpuid)
{
int node, cpu;
@@ -266,3 +259,56 @@ asmlinkage void plat_irq_dispatch(void)
/* top level irq handling */
do_IRQ(nlm_irq_to_xirq(node, i));
}
+
+#ifdef CONFIG_OF
+static struct irq_domain *xlp_pic_domain;
+
+static const struct irq_domain_ops xlp_pic_irq_domain_ops = {
+ .xlate = irq_domain_xlate_onetwocell,
+};
+
+static int __init xlp_of_pic_init(struct device_node *node,
+ struct device_node *parent)
+{
+ const int n_picirqs = PIC_IRT_LAST_IRQ - PIC_IRQ_BASE + 1;
+ struct resource res;
+ int socid, ret;
+
+ /* we need a hack to get the PIC's SoC chip id */
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret < 0) {
+ pr_err("PIC %s: reg property not found!\n", node->name);
+ return -EINVAL;
+ }
+ socid = (res.start >> 18) & 0x3;
+ xlp_pic_domain = irq_domain_add_legacy(node, n_picirqs,
+ nlm_irq_to_xirq(socid, PIC_IRQ_BASE), PIC_IRQ_BASE,
+ &xlp_pic_irq_domain_ops, NULL);
+ if (xlp_pic_domain == NULL) {
+ pr_err("PIC %s: Creating legacy domain failed!\n", node->name);
+ return -EINVAL;
+ }
+ pr_info("Node %d: IRQ domain created for PIC@%pa\n", socid,
+ &res.start);
+ return 0;
+}
+
+static struct of_device_id __initdata xlp_pic_irq_ids[] = {
+ { .compatible = "netlogic,xlp-pic", .data = xlp_of_pic_init },
+ {},
+};
+#endif
+
+void __init arch_init_irq(void)
+{
+ /* Initialize the irq descriptors */
+ nlm_init_percpu_irqs();
+ nlm_init_node_irqs(0);
+ write_c0_eimr(nlm_current_node()->irqmask);
+#if defined(CONFIG_CPU_XLR)
+ nlm_setup_fmn_irq();
+#endif
+#if defined(CONFIG_OF)
+ of_irq_init(xlp_pic_irq_ids);
+#endif
+}
diff --git a/arch/mips/netlogic/dts/xlp_evp.dts b/arch/mips/netlogic/dts/xlp_evp.dts
index e14f4230806..06407033678 100644
--- a/arch/mips/netlogic/dts/xlp_evp.dts
+++ b/arch/mips/netlogic/dts/xlp_evp.dts
@@ -76,10 +76,11 @@
};
};
pic: pic@4000 {
- interrupt-controller;
+ compatible = "netlogic,xlp-pic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0 0x4000 0x200>;
+ interrupt-controller;
};
nor_flash@1,0 {
diff --git a/arch/mips/netlogic/dts/xlp_svp.dts b/arch/mips/netlogic/dts/xlp_svp.dts
index 8af4bdbe5d9..9c5db102df5 100644
--- a/arch/mips/netlogic/dts/xlp_svp.dts
+++ b/arch/mips/netlogic/dts/xlp_svp.dts
@@ -76,10 +76,11 @@
};
};
pic: pic@4000 {
- interrupt-controller;
+ compatible = "netlogic,xlp-pic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0 0x4000 0x200>;
+ interrupt-controller;
};
nor_flash@1,0 {
diff --git a/arch/mips/netlogic/xlp/usb-init.c b/arch/mips/netlogic/xlp/usb-init.c
index 9c401dd7833..ef3897ef0dc 100644
--- a/arch/mips/netlogic/xlp/usb-init.c
+++ b/arch/mips/netlogic/xlp/usb-init.c
@@ -119,7 +119,7 @@ static u64 xlp_usb_dmamask = ~(u32)0;
static void nlm_usb_fixup_final(struct pci_dev *dev)
{
dev->dev.dma_mask = &xlp_usb_dmamask;
- dev->dev.coherent_dma_mask = DMA_BIT_MASK(64);
+ dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
switch (dev->devfn) {
case 0x10:
dev->irq = PIC_EHCI_0_IRQ;
diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c
index 9f64c238780..0238af1ba50 100644
--- a/arch/mips/powertv/asic/asic_devices.c
+++ b/arch/mips/powertv/asic/asic_devices.c
@@ -529,8 +529,7 @@ EXPORT_SYMBOL(asic_resource_get);
*/
void platform_release_memory(void *ptr, int size)
{
- free_reserved_area((unsigned long)ptr, (unsigned long)(ptr + size),
- -1, NULL);
+ free_reserved_area(ptr, ptr + size, -1, NULL);
}
EXPORT_SYMBOL(platform_release_memory);
diff --git a/arch/parisc/configs/c8000_defconfig b/arch/parisc/configs/c8000_defconfig
new file mode 100644
index 00000000000..f1100636129
--- /dev/null
+++ b/arch/parisc/configs/c8000_defconfig
@@ -0,0 +1,279 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_EXPERT=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_PA8X00=y
+CONFIG_MLONGCALLS=y
+CONFIG_64BIT=y
+CONFIG_SMP=y
+CONFIG_PREEMPT=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_IOMMU_CCIO=y
+CONFIG_PCI=y
+CONFIG_PCI_LBA=y
+# CONFIG_SUPERIO is not set
+# CONFIG_CHASSIS_LCD_LED is not set
+# CONFIG_PDC_CHASSIS is not set
+# CONFIG_PDC_CHASSIS_WARN is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_DIAG=m
+# CONFIG_IPV6 is not set
+CONFIG_IP_DCCP=m
+# CONFIG_IP_DCCP_CCID3 is not set
+CONFIG_TIPC=m
+CONFIG_LLC2=m
+CONFIG_DNS_RESOLVER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=y
+CONFIG_PARPORT_PC_FIFO=y
+CONFIG_BLK_DEV_UMEM=m
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_SX8=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=6144
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_WCACHE=y
+CONFIG_ATA_OVER_ETH=m
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_PLATFORM=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_SIIMAGE=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_SAS=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_NETCONSOLE=m
+CONFIG_TUN=y
+CONFIG_E1000=y
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+# CONFIG_WLAN is not set
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_HIL_OLD is not set
+# CONFIG_KEYBOARD_HIL is not set
+CONFIG_MOUSE_PS2=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_CM109=m
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_GSCPS2=m
+# CONFIG_HP_SDC is not set
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_MUX is not set
+CONFIG_SERIAL_JSM=m
+CONFIG_PRINTER=y
+CONFIG_HW_RANDOM=y
+CONFIG_RAW_DRIVER=m
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_SSB=m
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_AGP=y
+CONFIG_AGP_PARISC=y
+CONFIG_DRM=y
+CONFIG_DRM_RADEON=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+# CONFIG_FB_STI is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_STI_CONSOLE is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_AD1889=m
+# CONFIG_SND_USB is not set
+# CONFIG_SND_GSC is not set
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_KYE=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_HID_ZEROPLUS=m
+CONFIG_USB_HID=m
+CONFIG_USB=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=m
+CONFIG_REISERFS_FS=m
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_QUOTA=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_XATTR=y
+CONFIG_NFS_FS=m
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SLAB_LEAK=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+CONFIG_PANIC_ON_OOPS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_RT_MUTEX_TESTER=y
+CONFIG_PROVE_RCU_DELAY=y
+CONFIG_DEBUG_BLOCK_EXT_DEVT=y
+CONFIG_LATENCYTOP=y
+CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
+CONFIG_KEYS=y
+# CONFIG_CRYPTO_HW is not set
+CONFIG_FONTS=y
diff --git a/arch/parisc/include/asm/parisc-device.h b/arch/parisc/include/asm/parisc-device.h
index 9afdad6c2ff..eaf4dc1c729 100644
--- a/arch/parisc/include/asm/parisc-device.h
+++ b/arch/parisc/include/asm/parisc-device.h
@@ -23,6 +23,7 @@ struct parisc_device {
/* generic info returned from pdc_pat_cell_module() */
unsigned long mod_info; /* PAT specific - Misc Module info */
unsigned long pmod_loc; /* physical Module location */
+ unsigned long mod0;
#endif
u64 dma_mask; /* DMA mask for I/O */
struct device dev;
@@ -61,4 +62,6 @@ parisc_get_drvdata(struct parisc_device *d)
extern struct bus_type parisc_bus_type;
+int iosapic_serial_irq(struct parisc_device *dev);
+
#endif /*_ASM_PARISC_PARISC_DEVICE_H_*/
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index 2e65aa54bd1..c035673209f 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -71,18 +71,27 @@ flush_cache_all_local(void)
}
EXPORT_SYMBOL(flush_cache_all_local);
+/* Virtual address of pfn. */
+#define pfn_va(pfn) __va(PFN_PHYS(pfn))
+
void
update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
{
- struct page *page = pte_page(*ptep);
+ unsigned long pfn = pte_pfn(*ptep);
+ struct page *page;
- if (pfn_valid(page_to_pfn(page)) && page_mapping(page) &&
- test_bit(PG_dcache_dirty, &page->flags)) {
+ /* We don't have pte special. As a result, we can be called with
+ an invalid pfn and we don't need to flush the kernel dcache page.
+ This occurs with FireGL card in C8000. */
+ if (!pfn_valid(pfn))
+ return;
- flush_kernel_dcache_page(page);
+ page = pfn_to_page(pfn);
+ if (page_mapping(page) && test_bit(PG_dcache_dirty, &page->flags)) {
+ flush_kernel_dcache_page_addr(pfn_va(pfn));
clear_bit(PG_dcache_dirty, &page->flags);
} else if (parisc_requires_coherency())
- flush_kernel_dcache_page(page);
+ flush_kernel_dcache_page_addr(pfn_va(pfn));
}
void
@@ -495,44 +504,42 @@ static inline pte_t *get_ptep(pgd_t *pgd, unsigned long addr)
void flush_cache_mm(struct mm_struct *mm)
{
+ struct vm_area_struct *vma;
+ pgd_t *pgd;
+
/* Flushing the whole cache on each cpu takes forever on
rp3440, etc. So, avoid it if the mm isn't too big. */
- if (mm_total_size(mm) < parisc_cache_flush_threshold) {
- struct vm_area_struct *vma;
-
- if (mm->context == mfsp(3)) {
- for (vma = mm->mmap; vma; vma = vma->vm_next) {
- flush_user_dcache_range_asm(vma->vm_start,
- vma->vm_end);
- if (vma->vm_flags & VM_EXEC)
- flush_user_icache_range_asm(
- vma->vm_start, vma->vm_end);
- }
- } else {
- pgd_t *pgd = mm->pgd;
-
- for (vma = mm->mmap; vma; vma = vma->vm_next) {
- unsigned long addr;
-
- for (addr = vma->vm_start; addr < vma->vm_end;
- addr += PAGE_SIZE) {
- pte_t *ptep = get_ptep(pgd, addr);
- if (ptep != NULL) {
- pte_t pte = *ptep;
- __flush_cache_page(vma, addr,
- page_to_phys(pte_page(pte)));
- }
- }
- }
+ if (mm_total_size(mm) >= parisc_cache_flush_threshold) {
+ flush_cache_all();
+ return;
+ }
+
+ if (mm->context == mfsp(3)) {
+ for (vma = mm->mmap; vma; vma = vma->vm_next) {
+ flush_user_dcache_range_asm(vma->vm_start, vma->vm_end);
+ if ((vma->vm_flags & VM_EXEC) == 0)
+ continue;
+ flush_user_icache_range_asm(vma->vm_start, vma->vm_end);
}
return;
}
-#ifdef CONFIG_SMP
- flush_cache_all();
-#else
- flush_cache_all_local();
-#endif
+ pgd = mm->pgd;
+ for (vma = mm->mmap; vma; vma = vma->vm_next) {
+ unsigned long addr;
+
+ for (addr = vma->vm_start; addr < vma->vm_end;
+ addr += PAGE_SIZE) {
+ unsigned long pfn;
+ pte_t *ptep = get_ptep(pgd, addr);
+ if (!ptep)
+ continue;
+ pfn = pte_pfn(*ptep);
+ if (!pfn_valid(pfn))
+ continue;
+ __flush_cache_page(vma, addr, PFN_PHYS(pfn));
+ }
+ }
}
void
@@ -556,33 +563,32 @@ flush_user_icache_range(unsigned long start, unsigned long end)
void flush_cache_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
+ unsigned long addr;
+ pgd_t *pgd;
+
BUG_ON(!vma->vm_mm->context);
- if ((end - start) < parisc_cache_flush_threshold) {
- if (vma->vm_mm->context == mfsp(3)) {
- flush_user_dcache_range_asm(start, end);
- if (vma->vm_flags & VM_EXEC)
- flush_user_icache_range_asm(start, end);
- } else {
- unsigned long addr;
- pgd_t *pgd = vma->vm_mm->pgd;
-
- for (addr = start & PAGE_MASK; addr < end;
- addr += PAGE_SIZE) {
- pte_t *ptep = get_ptep(pgd, addr);
- if (ptep != NULL) {
- pte_t pte = *ptep;
- flush_cache_page(vma,
- addr, pte_pfn(pte));
- }
- }
- }
- } else {
-#ifdef CONFIG_SMP
+ if ((end - start) >= parisc_cache_flush_threshold) {
flush_cache_all();
-#else
- flush_cache_all_local();
-#endif
+ return;
+ }
+
+ if (vma->vm_mm->context == mfsp(3)) {
+ flush_user_dcache_range_asm(start, end);
+ if (vma->vm_flags & VM_EXEC)
+ flush_user_icache_range_asm(start, end);
+ return;
+ }
+
+ pgd = vma->vm_mm->pgd;
+ for (addr = start & PAGE_MASK; addr < end; addr += PAGE_SIZE) {
+ unsigned long pfn;
+ pte_t *ptep = get_ptep(pgd, addr);
+ if (!ptep)
+ continue;
+ pfn = pte_pfn(*ptep);
+ if (pfn_valid(pfn))
+ __flush_cache_page(vma, addr, PFN_PHYS(pfn));
}
}
@@ -591,9 +597,10 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long
{
BUG_ON(!vma->vm_mm->context);
- flush_tlb_page(vma, vmaddr);
- __flush_cache_page(vma, vmaddr, page_to_phys(pfn_to_page(pfn)));
-
+ if (pfn_valid(pfn)) {
+ flush_tlb_page(vma, vmaddr);
+ __flush_cache_page(vma, vmaddr, PFN_PHYS(pfn));
+ }
}
#ifdef CONFIG_PARISC_TMPALIAS
diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c
index 3295ef4a185..f0b6722fc70 100644
--- a/arch/parisc/kernel/inventory.c
+++ b/arch/parisc/kernel/inventory.c
@@ -211,6 +211,7 @@ pat_query_module(ulong pcell_loc, ulong mod_index)
/* REVISIT: who is the consumer of this? not sure yet... */
dev->mod_info = pa_pdc_cell->mod_info; /* pass to PAT_GET_ENTITY() */
dev->pmod_loc = pa_pdc_cell->mod_location;
+ dev->mod0 = pa_pdc_cell->mod[0];
register_parisc_device(dev); /* advertise device */
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 940188d1942..07349b00268 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -56,13 +56,6 @@
#define A(__x) ((unsigned long)(__x))
/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-#ifdef CONFIG_64BIT
-#include "sys32.h"
-#endif
-
-/*
* Do a signal return - restore sigcontext.
*/
diff --git a/arch/parisc/kernel/signal32.c b/arch/parisc/kernel/signal32.c
index 33eca1b0492..6c6a271a614 100644
--- a/arch/parisc/kernel/signal32.c
+++ b/arch/parisc/kernel/signal32.c
@@ -34,7 +34,6 @@
#include <asm/uaccess.h>
#include "signal32.h"
-#include "sys32.h"
#define DEBUG_COMPAT_SIG 0
#define DEBUG_COMPAT_SIG_LEVEL 2
diff --git a/arch/parisc/kernel/sys32.h b/arch/parisc/kernel/sys32.h
deleted file mode 100644
index 60dd470f39f..00000000000
--- a/arch/parisc/kernel/sys32.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright (C) 2002 Richard Hirst <rhirst at parisc-linux.org>
- * Copyright (C) 2003 James Bottomley <jejb at parisc-linux.org>
- * Copyright (C) 2003 Randolph Chung <tausq with parisc-linux.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _PARISC64_KERNEL_SYS32_H
-#define _PARISC64_KERNEL_SYS32_H
-
-#include <linux/compat.h>
-
-/* Call a kernel syscall which will use kernel space instead of user
- * space for its copy_to/from_user.
- */
-#define KERNEL_SYSCALL(ret, syscall, args...) \
-{ \
- mm_segment_t old_fs = get_fs(); \
- set_fs(KERNEL_DS); \
- ret = syscall(args); \
- set_fs (old_fs); \
-}
-
-#endif
diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c
index a134ff4da12..bb9f3b64de5 100644
--- a/arch/parisc/kernel/sys_parisc32.c
+++ b/arch/parisc/kernel/sys_parisc32.c
@@ -42,8 +42,6 @@
#include <asm/uaccess.h>
#include <asm/mmu_context.h>
-#include "sys32.h"
-
#undef DEBUG
#ifdef DEBUG
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index c86fcb92358..0e8cfd09da2 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -58,7 +58,7 @@ CONFIG_SCHED_SMT=y
CONFIG_PPC_DENORMALISATION=y
CONFIG_PCCARD=y
CONFIG_ELECTRA_CF=y
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
CONFIG_PACKET=y
diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig
index 4b20f76172e..0085dc4642c 100644
--- a/arch/powerpc/configs/ppc64e_defconfig
+++ b/arch/powerpc/configs/ppc64e_defconfig
@@ -32,7 +32,7 @@ CONFIG_IRQ_ALL_CPUS=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_PCI_MSI=y
CONFIG_PCCARD=y
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index bea8587c3af..1d4b9763895 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -53,7 +53,7 @@ CONFIG_PPC_64K_PAGES=y
CONFIG_PPC_SUBPAGE_PROT=y
CONFIG_SCHED_SMT=y
CONFIG_PPC_DENORMALISATION=y
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
CONFIG_PACKET=y
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 09a8743143f..d3e5e9bc8f9 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -55,6 +55,8 @@ struct device_node;
#define EEH_PE_RECOVERING (1 << 1) /* Recovering PE */
#define EEH_PE_PHB_DEAD (1 << 2) /* Dead PHB */
+#define EEH_PE_KEEP (1 << 8) /* Keep PE on hotplug */
+
struct eeh_pe {
int type; /* PE type: PHB/Bus/Device */
int state; /* PE EEH dependent mode */
@@ -72,8 +74,8 @@ struct eeh_pe {
struct list_head child; /* Child PEs */
};
-#define eeh_pe_for_each_dev(pe, edev) \
- list_for_each_entry(edev, &pe->edevs, list)
+#define eeh_pe_for_each_dev(pe, edev, tmp) \
+ list_for_each_entry_safe(edev, tmp, &pe->edevs, list)
/*
* The struct is used to trace EEH state for the associated
@@ -82,7 +84,13 @@ struct eeh_pe {
* another tree except the currently existing tree of PCI
* buses and PCI devices
*/
-#define EEH_DEV_IRQ_DISABLED (1<<0) /* Interrupt disabled */
+#define EEH_DEV_BRIDGE (1 << 0) /* PCI bridge */
+#define EEH_DEV_ROOT_PORT (1 << 1) /* PCIe root port */
+#define EEH_DEV_DS_PORT (1 << 2) /* Downstream port */
+#define EEH_DEV_IRQ_DISABLED (1 << 3) /* Interrupt disabled */
+#define EEH_DEV_DISCONNECTED (1 << 4) /* Removing from PE */
+
+#define EEH_DEV_SYSFS (1 << 8) /* Sysfs created */
struct eeh_dev {
int mode; /* EEH mode */
@@ -90,11 +98,13 @@ struct eeh_dev {
int config_addr; /* Config address */
int pe_config_addr; /* PE config address */
u32 config_space[16]; /* Saved PCI config space */
+ u8 pcie_cap; /* Saved PCIe capability */
struct eeh_pe *pe; /* Associated PE */
struct list_head list; /* Form link list in the PE */
struct pci_controller *phb; /* Associated PHB */
struct device_node *dn; /* Associated device node */
struct pci_dev *pdev; /* Associated PCI device */
+ struct pci_bus *bus; /* PCI bus for partial hotplug */
};
static inline struct device_node *eeh_dev_to_of_node(struct eeh_dev *edev)
@@ -193,8 +203,10 @@ int eeh_phb_pe_create(struct pci_controller *phb);
struct eeh_pe *eeh_phb_pe_get(struct pci_controller *phb);
struct eeh_pe *eeh_pe_get(struct eeh_dev *edev);
int eeh_add_to_parent_pe(struct eeh_dev *edev);
-int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe);
+int eeh_rmv_from_parent_pe(struct eeh_dev *edev);
void eeh_pe_update_time_stamp(struct eeh_pe *pe);
+void *eeh_pe_traverse(struct eeh_pe *root,
+ eeh_traverse_func fn, void *flag);
void *eeh_pe_dev_traverse(struct eeh_pe *root,
eeh_traverse_func fn, void *flag);
void eeh_pe_restore_bars(struct eeh_pe *pe);
@@ -209,10 +221,12 @@ unsigned long eeh_check_failure(const volatile void __iomem *token,
unsigned long val);
int eeh_dev_check_failure(struct eeh_dev *edev);
void eeh_addr_cache_build(void);
+void eeh_add_device_early(struct device_node *);
void eeh_add_device_tree_early(struct device_node *);
+void eeh_add_device_late(struct pci_dev *);
void eeh_add_device_tree_late(struct pci_bus *);
void eeh_add_sysfs_files(struct pci_bus *);
-void eeh_remove_bus_device(struct pci_dev *, int);
+void eeh_remove_device(struct pci_dev *);
/**
* EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
@@ -252,13 +266,17 @@ static inline unsigned long eeh_check_failure(const volatile void __iomem *token
static inline void eeh_addr_cache_build(void) { }
+static inline void eeh_add_device_early(struct device_node *dn) { }
+
static inline void eeh_add_device_tree_early(struct device_node *dn) { }
+static inline void eeh_add_device_late(struct pci_dev *dev) { }
+
static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
static inline void eeh_add_sysfs_files(struct pci_bus *bus) { }
-static inline void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe) { }
+static inline void eeh_remove_device(struct pci_dev *dev) { }
#define EEH_POSSIBLE_ERROR(val, type) (0)
#define EEH_IO_ERROR_VALUE(size) (-1UL)
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index ba713f166fa..10be1dd01c6 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -96,10 +96,11 @@ static inline bool arch_irqs_disabled(void)
#endif
#define hard_irq_disable() do { \
- u8 _was_enabled = get_paca()->soft_enabled; \
+ u8 _was_enabled; \
__hard_irq_disable(); \
- get_paca()->soft_enabled = 0; \
- get_paca()->irq_happened |= PACA_IRQ_HARD_DIS; \
+ _was_enabled = local_paca->soft_enabled; \
+ local_paca->soft_enabled = 0; \
+ local_paca->irq_happened |= PACA_IRQ_HARD_DIS; \
if (_was_enabled) \
trace_hardirqs_off(); \
} while(0)
diff --git a/arch/powerpc/include/asm/module.h b/arch/powerpc/include/asm/module.h
index c1df590ec44..49fa55bfbac 100644
--- a/arch/powerpc/include/asm/module.h
+++ b/arch/powerpc/include/asm/module.h
@@ -82,10 +82,9 @@ struct exception_table_entry;
void sort_ex_table(struct exception_table_entry *start,
struct exception_table_entry *finish);
-#ifdef CONFIG_MODVERSIONS
+#if defined(CONFIG_MODVERSIONS) && defined(CONFIG_PPC64)
#define ARCH_RELOCATES_KCRCTAB
-
-extern const unsigned long reloc_start[];
+#define reloc_start PHYSICAL_START
#endif
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_MODULE_H */
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 2c1d8cb9b26..32d0d2018fa 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -209,7 +209,6 @@ static inline struct eeh_dev *of_node_to_eeh_dev(struct device_node *dn)
extern struct pci_bus *pcibios_find_pci_bus(struct device_node *dn);
/** Remove all of the PCI devices under this bus */
-extern void __pcibios_remove_pci_devices(struct pci_bus *bus, int purge_pe);
extern void pcibios_remove_pci_devices(struct pci_bus *bus);
/** Discover new pci devices under this bus, and add them */
diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h
index 2dd7bfc459b..8b249264475 100644
--- a/arch/powerpc/include/asm/perf_event_server.h
+++ b/arch/powerpc/include/asm/perf_event_server.h
@@ -12,6 +12,7 @@
#include <linux/types.h>
#include <asm/hw_irq.h>
#include <linux/device.h>
+#include <uapi/asm/perf_event.h>
#define MAX_HWEVENTS 8
#define MAX_EVENT_ALTERNATIVES 8
@@ -69,11 +70,6 @@ struct power_pmu {
#define PPMU_LIMITED_PMC_REQD 2 /* have to put this on a limited PMC */
#define PPMU_ONLY_COUNT_RUN 4 /* only counting in run state */
-/*
- * We use the event config bit 63 as a flag to request EBB.
- */
-#define EVENT_CONFIG_EBB_SHIFT 63
-
extern int register_power_pmu(struct power_pmu *);
struct pt_regs;
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 5d7d9c2a547..a6840e4e24f 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -1088,7 +1088,8 @@
#define PVR_970MP 0x0044
#define PVR_970GX 0x0045
#define PVR_POWER7p 0x004A
-#define PVR_POWER8 0x004B
+#define PVR_POWER8E 0x004B
+#define PVR_POWER8 0x004D
#define PVR_BE 0x0070
#define PVR_PA6T 0x0090
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index ffbaabebcdc..48cfc858abd 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -145,6 +145,10 @@ extern void __cpu_die(unsigned int cpu);
#define smp_setup_cpu_maps()
static inline void inhibit_secondary_onlining(void) {}
static inline void uninhibit_secondary_onlining(void) {}
+static inline const struct cpumask *cpu_sibling_mask(int cpu)
+{
+ return cpumask_of(cpu);
+}
#endif /* CONFIG_SMP */
diff --git a/arch/powerpc/include/uapi/asm/Kbuild b/arch/powerpc/include/uapi/asm/Kbuild
index 5182c8622b5..48be855ef37 100644
--- a/arch/powerpc/include/uapi/asm/Kbuild
+++ b/arch/powerpc/include/uapi/asm/Kbuild
@@ -20,6 +20,7 @@ header-y += mman.h
header-y += msgbuf.h
header-y += nvram.h
header-y += param.h
+header-y += perf_event.h
header-y += poll.h
header-y += posix_types.h
header-y += ps3fb.h
diff --git a/arch/powerpc/include/uapi/asm/perf_event.h b/arch/powerpc/include/uapi/asm/perf_event.h
new file mode 100644
index 00000000000..80a4d40cf5b
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/perf_event.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2013 Michael Ellerman, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ */
+
+#ifndef _UAPI_ASM_POWERPC_PERF_EVENT_H
+#define _UAPI_ASM_POWERPC_PERF_EVENT_H
+
+/*
+ * We use bit 63 of perf_event_attr.config as a flag to request EBB.
+ */
+#define PERF_EVENT_CONFIG_EBB_SHIFT 63
+
+#endif /* _UAPI_ASM_POWERPC_PERF_EVENT_H */
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 2a45d0f0438..22973a74df7 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -494,9 +494,27 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_restore = __restore_cpu_power7,
.platform = "power7+",
},
- { /* Power8 */
+ { /* Power8E */
.pvr_mask = 0xffff0000,
.pvr_value = 0x004b0000,
+ .cpu_name = "POWER8E (raw)",
+ .cpu_features = CPU_FTRS_POWER8,
+ .cpu_user_features = COMMON_USER_POWER8,
+ .cpu_user_features2 = COMMON_USER2_POWER8,
+ .mmu_features = MMU_FTRS_POWER8,
+ .icache_bsize = 128,
+ .dcache_bsize = 128,
+ .num_pmcs = 6,
+ .pmc_type = PPC_PMC_IBM,
+ .oprofile_cpu_type = "ppc64/power8",
+ .oprofile_type = PPC_OPROFILE_INVALID,
+ .cpu_setup = __setup_cpu_power8,
+ .cpu_restore = __restore_cpu_power8,
+ .platform = "power8",
+ },
+ { /* Power8 */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x004d0000,
.cpu_name = "POWER8 (raw)",
.cpu_features = CPU_FTRS_POWER8,
.cpu_user_features = COMMON_USER_POWER8,
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 39954fe941b..ea9414c8088 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -231,7 +231,7 @@ static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len)
void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
{
size_t loglen = 0;
- struct eeh_dev *edev;
+ struct eeh_dev *edev, *tmp;
bool valid_cfg_log = true;
/*
@@ -251,7 +251,7 @@ void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
eeh_pe_restore_bars(pe);
pci_regs_buf[0] = 0;
- eeh_pe_for_each_dev(pe, edev) {
+ eeh_pe_for_each_dev(pe, edev, tmp) {
loglen += eeh_gather_pci_data(edev, pci_regs_buf + loglen,
EEH_PCI_REGS_LOG_LEN - loglen);
}
@@ -499,8 +499,6 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon
}
eeh_dev_check_failure(edev);
-
- pci_dev_put(eeh_dev_to_pci_dev(edev));
return val;
}
@@ -838,7 +836,7 @@ core_initcall_sync(eeh_init);
* on the CEC architecture, type of the device, on earlier boot
* command-line arguments & etc.
*/
-static void eeh_add_device_early(struct device_node *dn)
+void eeh_add_device_early(struct device_node *dn)
{
struct pci_controller *phb;
@@ -886,7 +884,7 @@ EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
* This routine must be used to complete EEH initialization for PCI
* devices that were added after system boot (e.g. hotplug, dlpar).
*/
-static void eeh_add_device_late(struct pci_dev *dev)
+void eeh_add_device_late(struct pci_dev *dev)
{
struct device_node *dn;
struct eeh_dev *edev;
@@ -902,9 +900,23 @@ static void eeh_add_device_late(struct pci_dev *dev)
pr_debug("EEH: Already referenced !\n");
return;
}
- WARN_ON(edev->pdev);
- pci_dev_get(dev);
+ /*
+ * The EEH cache might not be removed correctly because of
+ * unbalanced kref to the device during unplug time, which
+ * relies on pcibios_release_device(). So we have to remove
+ * that here explicitly.
+ */
+ if (edev->pdev) {
+ eeh_rmv_from_parent_pe(edev);
+ eeh_addr_cache_rmv_dev(edev->pdev);
+ eeh_sysfs_remove_device(edev->pdev);
+ edev->mode &= ~EEH_DEV_SYSFS;
+
+ edev->pdev = NULL;
+ dev->dev.archdata.edev = NULL;
+ }
+
edev->pdev = dev;
dev->dev.archdata.edev = edev;
@@ -967,7 +979,6 @@ EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
/**
* eeh_remove_device - Undo EEH setup for the indicated pci device
* @dev: pci device to be removed
- * @purge_pe: remove the PE or not
*
* This routine should be called when a device is removed from
* a running system (e.g. by hotplug or dlpar). It unregisters
@@ -975,7 +986,7 @@ EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
* this device will no longer be detected after this call; thus,
* i/o errors affecting this slot may leave this device unusable.
*/
-static void eeh_remove_device(struct pci_dev *dev, int purge_pe)
+void eeh_remove_device(struct pci_dev *dev)
{
struct eeh_dev *edev;
@@ -986,42 +997,29 @@ static void eeh_remove_device(struct pci_dev *dev, int purge_pe)
/* Unregister the device with the EEH/PCI address search system */
pr_debug("EEH: Removing device %s\n", pci_name(dev));
- if (!edev || !edev->pdev) {
+ if (!edev || !edev->pdev || !edev->pe) {
pr_debug("EEH: Not referenced !\n");
return;
}
+
+ /*
+ * During the hotplug for EEH error recovery, we need the EEH
+ * device attached to the parent PE in order for BAR restore
+ * a bit later. So we keep it for BAR restore and remove it
+ * from the parent PE during the BAR resotre.
+ */
edev->pdev = NULL;
dev->dev.archdata.edev = NULL;
- pci_dev_put(dev);
+ if (!(edev->pe->state & EEH_PE_KEEP))
+ eeh_rmv_from_parent_pe(edev);
+ else
+ edev->mode |= EEH_DEV_DISCONNECTED;
- eeh_rmv_from_parent_pe(edev, purge_pe);
eeh_addr_cache_rmv_dev(dev);
eeh_sysfs_remove_device(dev);
+ edev->mode &= ~EEH_DEV_SYSFS;
}
-/**
- * eeh_remove_bus_device - Undo EEH setup for the indicated PCI device
- * @dev: PCI device
- * @purge_pe: remove the corresponding PE or not
- *
- * This routine must be called when a device is removed from the
- * running system through hotplug or dlpar. The corresponding
- * PCI address cache will be removed.
- */
-void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe)
-{
- struct pci_bus *bus = dev->subordinate;
- struct pci_dev *child, *tmp;
-
- eeh_remove_device(dev, purge_pe);
-
- if (bus && dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- list_for_each_entry_safe(child, tmp, &bus->devices, bus_list)
- eeh_remove_bus_device(child, purge_pe);
- }
-}
-EXPORT_SYMBOL_GPL(eeh_remove_bus_device);
-
static int proc_eeh_show(struct seq_file *m, void *v)
{
if (0 == eeh_subsystem_enabled) {
diff --git a/arch/powerpc/kernel/eeh_cache.c b/arch/powerpc/kernel/eeh_cache.c
index f9ac1232a74..e8c9fd546a5 100644
--- a/arch/powerpc/kernel/eeh_cache.c
+++ b/arch/powerpc/kernel/eeh_cache.c
@@ -68,16 +68,12 @@ static inline struct eeh_dev *__eeh_addr_cache_get_device(unsigned long addr)
struct pci_io_addr_range *piar;
piar = rb_entry(n, struct pci_io_addr_range, rb_node);
- if (addr < piar->addr_lo) {
+ if (addr < piar->addr_lo)
n = n->rb_left;
- } else {
- if (addr > piar->addr_hi) {
- n = n->rb_right;
- } else {
- pci_dev_get(piar->pcidev);
- return piar->edev;
- }
- }
+ else if (addr > piar->addr_hi)
+ n = n->rb_right;
+ else
+ return piar->edev;
}
return NULL;
@@ -156,7 +152,6 @@ eeh_addr_cache_insert(struct pci_dev *dev, unsigned long alo,
if (!piar)
return NULL;
- pci_dev_get(dev);
piar->addr_lo = alo;
piar->addr_hi = ahi;
piar->edev = pci_dev_to_eeh_dev(dev);
@@ -250,7 +245,6 @@ restart:
if (piar->pcidev == dev) {
rb_erase(n, &pci_io_addr_cache_root.rb_root);
- pci_dev_put(piar->pcidev);
kfree(piar);
goto restart;
}
@@ -302,12 +296,10 @@ void eeh_addr_cache_build(void)
if (!edev)
continue;
- pci_dev_get(dev); /* matching put is in eeh_remove_device() */
dev->dev.archdata.edev = edev;
edev->pdev = dev;
eeh_addr_cache_insert_dev(dev);
-
eeh_sysfs_add_device(dev);
}
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 2b1ce17cae5..36bed5a1275 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -143,10 +143,14 @@ static void eeh_disable_irq(struct pci_dev *dev)
static void eeh_enable_irq(struct pci_dev *dev)
{
struct eeh_dev *edev = pci_dev_to_eeh_dev(dev);
+ struct irq_desc *desc;
if ((edev->mode) & EEH_DEV_IRQ_DISABLED) {
edev->mode &= ~EEH_DEV_IRQ_DISABLED;
- enable_irq(dev->irq);
+
+ desc = irq_to_desc(dev->irq);
+ if (desc && desc->depth > 0)
+ enable_irq(dev->irq);
}
}
@@ -338,6 +342,54 @@ static void *eeh_report_failure(void *data, void *userdata)
return NULL;
}
+static void *eeh_rmv_device(void *data, void *userdata)
+{
+ struct pci_driver *driver;
+ struct eeh_dev *edev = (struct eeh_dev *)data;
+ struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
+ int *removed = (int *)userdata;
+
+ /*
+ * Actually, we should remove the PCI bridges as well.
+ * However, that's lots of complexity to do that,
+ * particularly some of devices under the bridge might
+ * support EEH. So we just care about PCI devices for
+ * simplicity here.
+ */
+ if (!dev || (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE))
+ return NULL;
+ driver = eeh_pcid_get(dev);
+ if (driver && driver->err_handler)
+ return NULL;
+
+ /* Remove it from PCI subsystem */
+ pr_debug("EEH: Removing %s without EEH sensitive driver\n",
+ pci_name(dev));
+ edev->bus = dev->bus;
+ edev->mode |= EEH_DEV_DISCONNECTED;
+ (*removed)++;
+
+ pci_stop_and_remove_bus_device(dev);
+
+ return NULL;
+}
+
+static void *eeh_pe_detach_dev(void *data, void *userdata)
+{
+ struct eeh_pe *pe = (struct eeh_pe *)data;
+ struct eeh_dev *edev, *tmp;
+
+ eeh_pe_for_each_dev(pe, edev, tmp) {
+ if (!(edev->mode & EEH_DEV_DISCONNECTED))
+ continue;
+
+ edev->mode &= ~(EEH_DEV_DISCONNECTED | EEH_DEV_IRQ_DISABLED);
+ eeh_rmv_from_parent_pe(edev);
+ }
+
+ return NULL;
+}
+
/**
* eeh_reset_device - Perform actual reset of a pci slot
* @pe: EEH PE
@@ -349,8 +401,9 @@ static void *eeh_report_failure(void *data, void *userdata)
*/
static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
{
+ struct pci_bus *frozen_bus = eeh_pe_bus_get(pe);
struct timeval tstamp;
- int cnt, rc;
+ int cnt, rc, removed = 0;
/* pcibios will clear the counter; save the value */
cnt = pe->freeze_count;
@@ -362,8 +415,11 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
* devices are expected to be attached soon when calling
* into pcibios_add_pci_devices().
*/
+ eeh_pe_state_mark(pe, EEH_PE_KEEP);
if (bus)
- __pcibios_remove_pci_devices(bus, 0);
+ pcibios_remove_pci_devices(bus);
+ else if (frozen_bus)
+ eeh_pe_dev_traverse(pe, eeh_rmv_device, &removed);
/* Reset the pci controller. (Asserts RST#; resets config space).
* Reconfigure bridges and devices. Don't try to bring the system
@@ -384,9 +440,24 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
* potentially weird things happen.
*/
if (bus) {
+ pr_info("EEH: Sleep 5s ahead of complete hotplug\n");
ssleep(5);
+
+ /*
+ * The EEH device is still connected with its parent
+ * PE. We should disconnect it so the binding can be
+ * rebuilt when adding PCI devices.
+ */
+ eeh_pe_traverse(pe, eeh_pe_detach_dev, NULL);
pcibios_add_pci_devices(bus);
+ } else if (frozen_bus && removed) {
+ pr_info("EEH: Sleep 5s ahead of partial hotplug\n");
+ ssleep(5);
+
+ eeh_pe_traverse(pe, eeh_pe_detach_dev, NULL);
+ pcibios_add_pci_devices(frozen_bus);
}
+ eeh_pe_state_clear(pe, EEH_PE_KEEP);
pe->tstamp = tstamp;
pe->freeze_count = cnt;
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index 016588a6f5e..f9450537e33 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -149,8 +149,8 @@ static struct eeh_pe *eeh_pe_next(struct eeh_pe *pe,
* callback returns something other than NULL, or no more PEs
* to be traversed.
*/
-static void *eeh_pe_traverse(struct eeh_pe *root,
- eeh_traverse_func fn, void *flag)
+void *eeh_pe_traverse(struct eeh_pe *root,
+ eeh_traverse_func fn, void *flag)
{
struct eeh_pe *pe;
void *ret;
@@ -176,7 +176,7 @@ void *eeh_pe_dev_traverse(struct eeh_pe *root,
eeh_traverse_func fn, void *flag)
{
struct eeh_pe *pe;
- struct eeh_dev *edev;
+ struct eeh_dev *edev, *tmp;
void *ret;
if (!root) {
@@ -186,7 +186,7 @@ void *eeh_pe_dev_traverse(struct eeh_pe *root,
/* Traverse root PE */
for (pe = root; pe; pe = eeh_pe_next(pe, root)) {
- eeh_pe_for_each_dev(pe, edev) {
+ eeh_pe_for_each_dev(pe, edev, tmp) {
ret = fn(edev, flag);
if (ret)
return ret;
@@ -333,7 +333,7 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
while (parent) {
if (!(parent->type & EEH_PE_INVALID))
break;
- parent->type &= ~EEH_PE_INVALID;
+ parent->type &= ~(EEH_PE_INVALID | EEH_PE_KEEP);
parent = parent->parent;
}
pr_debug("EEH: Add %s to Device PE#%x, Parent PE#%x\n",
@@ -397,21 +397,20 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
/**
* eeh_rmv_from_parent_pe - Remove one EEH device from the associated PE
* @edev: EEH device
- * @purge_pe: remove PE or not
*
* The PE hierarchy tree might be changed when doing PCI hotplug.
* Also, the PCI devices or buses could be removed from the system
* during EEH recovery. So we have to call the function remove the
* corresponding PE accordingly if necessary.
*/
-int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe)
+int eeh_rmv_from_parent_pe(struct eeh_dev *edev)
{
struct eeh_pe *pe, *parent, *child;
int cnt;
if (!edev->pe) {
- pr_warning("%s: No PE found for EEH device %s\n",
- __func__, edev->dn->full_name);
+ pr_debug("%s: No PE found for EEH device %s\n",
+ __func__, edev->dn->full_name);
return -EEXIST;
}
@@ -431,7 +430,7 @@ int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe)
if (pe->type & EEH_PE_PHB)
break;
- if (purge_pe) {
+ if (!(pe->state & EEH_PE_KEEP)) {
if (list_empty(&pe->edevs) &&
list_empty(&pe->child_list)) {
list_del(&pe->child);
@@ -502,7 +501,7 @@ static void *__eeh_pe_state_mark(void *data, void *flag)
{
struct eeh_pe *pe = (struct eeh_pe *)data;
int state = *((int *)flag);
- struct eeh_dev *tmp;
+ struct eeh_dev *edev, *tmp;
struct pci_dev *pdev;
/*
@@ -512,8 +511,8 @@ static void *__eeh_pe_state_mark(void *data, void *flag)
* the PCI device driver.
*/
pe->state |= state;
- eeh_pe_for_each_dev(pe, tmp) {
- pdev = eeh_dev_to_pci_dev(tmp);
+ eeh_pe_for_each_dev(pe, edev, tmp) {
+ pdev = eeh_dev_to_pci_dev(edev);
if (pdev)
pdev->error_state = pci_channel_io_frozen;
}
@@ -579,7 +578,7 @@ void eeh_pe_state_clear(struct eeh_pe *pe, int state)
* blocked on normal path during the stage. So we need utilize
* eeh operations, which is always permitted.
*/
-static void eeh_bridge_check_link(struct pci_dev *pdev,
+static void eeh_bridge_check_link(struct eeh_dev *edev,
struct device_node *dn)
{
int cap;
@@ -590,16 +589,17 @@ static void eeh_bridge_check_link(struct pci_dev *pdev,
* We only check root port and downstream ports of
* PCIe switches
*/
- if (!pci_is_pcie(pdev) ||
- (pci_pcie_type(pdev) != PCI_EXP_TYPE_ROOT_PORT &&
- pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM))
+ if (!(edev->mode & (EEH_DEV_ROOT_PORT | EEH_DEV_DS_PORT)))
return;
- pr_debug("%s: Check PCIe link for %s ...\n",
- __func__, pci_name(pdev));
+ pr_debug("%s: Check PCIe link for %04x:%02x:%02x.%01x ...\n",
+ __func__, edev->phb->global_number,
+ edev->config_addr >> 8,
+ PCI_SLOT(edev->config_addr & 0xFF),
+ PCI_FUNC(edev->config_addr & 0xFF));
/* Check slot status */
- cap = pdev->pcie_cap;
+ cap = edev->pcie_cap;
eeh_ops->read_config(dn, cap + PCI_EXP_SLTSTA, 2, &val);
if (!(val & PCI_EXP_SLTSTA_PDS)) {
pr_debug(" No card in the slot (0x%04x) !\n", val);
@@ -653,8 +653,7 @@ static void eeh_bridge_check_link(struct pci_dev *pdev,
#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF))
#define SAVED_BYTE(OFF) (((u8 *)(edev->config_space))[BYTE_SWAP(OFF)])
-static void eeh_restore_bridge_bars(struct pci_dev *pdev,
- struct eeh_dev *edev,
+static void eeh_restore_bridge_bars(struct eeh_dev *edev,
struct device_node *dn)
{
int i;
@@ -680,7 +679,7 @@ static void eeh_restore_bridge_bars(struct pci_dev *pdev,
eeh_ops->write_config(dn, PCI_COMMAND, 4, edev->config_space[1]);
/* Check the PCIe link is ready */
- eeh_bridge_check_link(pdev, dn);
+ eeh_bridge_check_link(edev, dn);
}
static void eeh_restore_device_bars(struct eeh_dev *edev,
@@ -729,19 +728,12 @@ static void eeh_restore_device_bars(struct eeh_dev *edev,
*/
static void *eeh_restore_one_device_bars(void *data, void *flag)
{
- struct pci_dev *pdev = NULL;
struct eeh_dev *edev = (struct eeh_dev *)data;
struct device_node *dn = eeh_dev_to_of_node(edev);
- /* Trace the PCI bridge */
- if (eeh_probe_mode_dev()) {
- pdev = eeh_dev_to_pci_dev(edev);
- if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
- pdev = NULL;
- }
-
- if (pdev)
- eeh_restore_bridge_bars(pdev, edev, dn);
+ /* Do special restore for bridges */
+ if (edev->mode & EEH_DEV_BRIDGE)
+ eeh_restore_bridge_bars(edev, dn);
else
eeh_restore_device_bars(edev, dn);
diff --git a/arch/powerpc/kernel/eeh_sysfs.c b/arch/powerpc/kernel/eeh_sysfs.c
index e7ae3484918..5d753d4f2c7 100644
--- a/arch/powerpc/kernel/eeh_sysfs.c
+++ b/arch/powerpc/kernel/eeh_sysfs.c
@@ -56,19 +56,40 @@ EEH_SHOW_ATTR(eeh_pe_config_addr, pe_config_addr, "0x%x");
void eeh_sysfs_add_device(struct pci_dev *pdev)
{
+ struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);
int rc=0;
+ if (edev && (edev->mode & EEH_DEV_SYSFS))
+ return;
+
rc += device_create_file(&pdev->dev, &dev_attr_eeh_mode);
rc += device_create_file(&pdev->dev, &dev_attr_eeh_config_addr);
rc += device_create_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
if (rc)
printk(KERN_WARNING "EEH: Unable to create sysfs entries\n");
+ else if (edev)
+ edev->mode |= EEH_DEV_SYSFS;
}
void eeh_sysfs_remove_device(struct pci_dev *pdev)
{
+ struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);
+
+ /*
+ * The parent directory might have been removed. We needn't
+ * continue for that case.
+ */
+ if (!pdev->dev.kobj.sd) {
+ if (edev)
+ edev->mode &= ~EEH_DEV_SYSFS;
+ return;
+ }
+
device_remove_file(&pdev->dev, &dev_attr_eeh_mode);
device_remove_file(&pdev->dev, &dev_attr_eeh_config_addr);
device_remove_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
+
+ if (edev)
+ edev->mode &= ~EEH_DEV_SYSFS;
}
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 2e51cde616d..c69440cef7a 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -362,7 +362,7 @@ int arch_show_interrupts(struct seq_file *p, int prec)
seq_printf(p, "%10u ", per_cpu(irq_stat, j).spurious_irqs);
seq_printf(p, " Spurious interrupts\n");
- seq_printf(p, "%*s: ", prec, "CNT");
+ seq_printf(p, "%*s: ", prec, "PMI");
for_each_online_cpu(j)
seq_printf(p, "%10u ", per_cpu(irq_stat, j).pmu_irqs);
seq_printf(p, " Performance monitoring interrupts\n");
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index f46914a0f33..7d22a675fe1 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1462,6 +1462,8 @@ void pcibios_finish_adding_to_bus(struct pci_bus *bus)
/* Allocate bus and devices resources */
pcibios_allocate_bus_resources(bus);
pcibios_claim_one_bus(bus);
+ if (!pci_has_flag(PCI_PROBE_ONLY))
+ pci_assign_unassigned_bus_resources(bus);
/* Fixup EEH */
eeh_add_device_tree_late(bus);
diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c
index 3f608800c06..c1e17ae68a0 100644
--- a/arch/powerpc/kernel/pci-hotplug.c
+++ b/arch/powerpc/kernel/pci-hotplug.c
@@ -22,45 +22,40 @@
#include <asm/eeh.h>
/**
- * __pcibios_remove_pci_devices - remove all devices under this bus
+ * pcibios_release_device - release PCI device
+ * @dev: PCI device
+ *
+ * The function is called before releasing the indicated PCI device.
+ */
+void pcibios_release_device(struct pci_dev *dev)
+{
+ eeh_remove_device(dev);
+}
+
+/**
+ * pcibios_remove_pci_devices - remove all devices under this bus
* @bus: the indicated PCI bus
- * @purge_pe: destroy the PE on removal of PCI devices
*
* Remove all of the PCI devices under this bus both from the
* linux pci device tree, and from the powerpc EEH address cache.
- * By default, the corresponding PE will be destroied during the
- * normal PCI hotplug path. For PCI hotplug during EEH recovery,
- * the corresponding PE won't be destroied and deallocated.
*/
-void __pcibios_remove_pci_devices(struct pci_bus *bus, int purge_pe)
+void pcibios_remove_pci_devices(struct pci_bus *bus)
{
struct pci_dev *dev, *tmp;
struct pci_bus *child_bus;
/* First go down child busses */
list_for_each_entry(child_bus, &bus->children, node)
- __pcibios_remove_pci_devices(child_bus, purge_pe);
+ pcibios_remove_pci_devices(child_bus);
pr_debug("PCI: Removing devices on bus %04x:%02x\n",
pci_domain_nr(bus), bus->number);
list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
- pr_debug(" * Removing %s...\n", pci_name(dev));
- eeh_remove_bus_device(dev, purge_pe);
+ pr_debug(" Removing %s...\n", pci_name(dev));
pci_stop_and_remove_bus_device(dev);
}
}
-/**
- * pcibios_remove_pci_devices - remove all devices under this bus
- * @bus: the indicated PCI bus
- *
- * Remove all of the PCI devices under this bus both from the
- * linux pci device tree, and from the powerpc EEH address cache.
- */
-void pcibios_remove_pci_devices(struct pci_bus *bus)
-{
- __pcibios_remove_pci_devices(bus, 1);
-}
EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices);
/**
@@ -76,7 +71,7 @@ EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices);
*/
void pcibios_add_pci_devices(struct pci_bus * bus)
{
- int slotno, num, mode, pass, max;
+ int slotno, mode, pass, max;
struct pci_dev *dev;
struct device_node *dn = pci_bus_to_OF_node(bus);
@@ -90,11 +85,15 @@ void pcibios_add_pci_devices(struct pci_bus * bus)
/* use ofdt-based probe */
of_rescan_bus(dn, bus);
} else if (mode == PCI_PROBE_NORMAL) {
- /* use legacy probe */
+ /*
+ * Use legacy probe. In the partial hotplug case, we
+ * probably have grandchildren devices unplugged. So
+ * we don't check the return value from pci_scan_slot() in
+ * order for fully rescan all the way down to pick them up.
+ * They can have been removed during partial hotplug.
+ */
slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
- num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
- if (!num)
- return;
+ pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
pcibios_setup_bus_devices(bus);
max = bus->busn_res.start;
for (pass = 0; pass < 2; pass++) {
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 6b0ba5854d9..15d9105323b 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -230,11 +230,14 @@ void of_scan_pci_bridge(struct pci_dev *dev)
return;
}
- bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
+ bus = pci_find_bus(pci_domain_nr(dev->bus), busrange[0]);
if (!bus) {
- printk(KERN_ERR "Failed to create pci bus for %s\n",
- node->full_name);
- return;
+ bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
+ if (!bus) {
+ printk(KERN_ERR "Failed to create pci bus for %s\n",
+ node->full_name);
+ return;
+ }
}
bus->primary = dev->bus->number;
@@ -292,6 +295,38 @@ void of_scan_pci_bridge(struct pci_dev *dev)
}
EXPORT_SYMBOL(of_scan_pci_bridge);
+static struct pci_dev *of_scan_pci_dev(struct pci_bus *bus,
+ struct device_node *dn)
+{
+ struct pci_dev *dev = NULL;
+ const u32 *reg;
+ int reglen, devfn;
+
+ pr_debug(" * %s\n", dn->full_name);
+ if (!of_device_is_available(dn))
+ return NULL;
+
+ reg = of_get_property(dn, "reg", &reglen);
+ if (reg == NULL || reglen < 20)
+ return NULL;
+ devfn = (reg[0] >> 8) & 0xff;
+
+ /* Check if the PCI device is already there */
+ dev = pci_get_slot(bus, devfn);
+ if (dev) {
+ pci_dev_put(dev);
+ return dev;
+ }
+
+ /* create a new pci_dev for this device */
+ dev = of_create_pci_dev(dn, bus, devfn);
+ if (!dev)
+ return NULL;
+
+ pr_debug(" dev header type: %x\n", dev->hdr_type);
+ return dev;
+}
+
/**
* __of_scan_bus - given a PCI bus node, setup bus and scan for child devices
* @node: device tree node for the PCI bus
@@ -302,8 +337,6 @@ static void __of_scan_bus(struct device_node *node, struct pci_bus *bus,
int rescan_existing)
{
struct device_node *child;
- const u32 *reg;
- int reglen, devfn;
struct pci_dev *dev;
pr_debug("of_scan_bus(%s) bus no %d...\n",
@@ -311,16 +344,7 @@ static void __of_scan_bus(struct device_node *node, struct pci_bus *bus,
/* Scan direct children */
for_each_child_of_node(node, child) {
- pr_debug(" * %s\n", child->full_name);
- if (!of_device_is_available(child))
- continue;
- reg = of_get_property(child, "reg", &reglen);
- if (reg == NULL || reglen < 20)
- continue;
- devfn = (reg[0] >> 8) & 0xff;
-
- /* create a new pci_dev for this device */
- dev = of_create_pci_dev(child, bus, devfn);
+ dev = of_scan_pci_dev(bus, child);
if (!dev)
continue;
pr_debug(" dev header type: %x\n", dev->hdr_type);
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 5eccda9fd33..607902424e7 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -644,7 +644,8 @@ unsigned char ibm_architecture_vec[] = {
W(0xfffe0000), W(0x003a0000), /* POWER5/POWER5+ */
W(0xffff0000), W(0x003e0000), /* POWER6 */
W(0xffff0000), W(0x003f0000), /* POWER7 */
- W(0xffff0000), W(0x004b0000), /* POWER8 */
+ W(0xffff0000), W(0x004b0000), /* POWER8E */
+ W(0xffff0000), W(0x004d0000), /* POWER8 */
W(0xffffffff), W(0x0f000004), /* all 2.07-compliant */
W(0xffffffff), W(0x0f000003), /* all 2.06-compliant */
W(0xffffffff), W(0x0f000002), /* all 2.05-compliant */
@@ -706,7 +707,7 @@ unsigned char ibm_architecture_vec[] = {
* must match by the macro below. Update the definition if
* the structure layout changes.
*/
-#define IBM_ARCH_VEC_NRCORES_OFFSET 117
+#define IBM_ARCH_VEC_NRCORES_OFFSET 125
W(NR_CPUS), /* number of cores supported */
0,
0,
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 654e479802f..f096e72262f 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -38,9 +38,6 @@ jiffies = jiffies_64 + 4;
#endif
SECTIONS
{
- . = 0;
- reloc_start = .;
-
. = KERNELBASE;
/*
diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c
index 3f0c30ae479..c33d939120c 100644
--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -43,6 +43,7 @@ static inline void __tlbie(unsigned long vpn, int psize, int apsize, int ssize)
{
unsigned long va;
unsigned int penc;
+ unsigned long sllp;
/*
* We need 14 to 65 bits of va for a tlibe of 4K page
@@ -64,7 +65,9 @@ static inline void __tlbie(unsigned long vpn, int psize, int apsize, int ssize)
/* clear out bits after (52) [0....52.....63] */
va &= ~((1ul << (64 - 52)) - 1);
va |= ssize << 8;
- va |= mmu_psize_defs[apsize].sllp << 6;
+ sllp = ((mmu_psize_defs[apsize].sllp & SLB_VSID_L) >> 6) |
+ ((mmu_psize_defs[apsize].sllp & SLB_VSID_LP) >> 4);
+ va |= sllp << 5;
asm volatile(ASM_FTR_IFCLR("tlbie %0,0", PPC_TLBIE(%1,%0), %2)
: : "r" (va), "r"(0), "i" (CPU_FTR_ARCH_206)
: "memory");
@@ -98,6 +101,7 @@ static inline void __tlbiel(unsigned long vpn, int psize, int apsize, int ssize)
{
unsigned long va;
unsigned int penc;
+ unsigned long sllp;
/* VPN_SHIFT can be atmost 12 */
va = vpn << VPN_SHIFT;
@@ -113,7 +117,9 @@ static inline void __tlbiel(unsigned long vpn, int psize, int apsize, int ssize)
/* clear out bits after(52) [0....52.....63] */
va &= ~((1ul << (64 - 52)) - 1);
va |= ssize << 8;
- va |= mmu_psize_defs[apsize].sllp << 6;
+ sllp = ((mmu_psize_defs[apsize].sllp & SLB_VSID_L) >> 6) |
+ ((mmu_psize_defs[apsize].sllp & SLB_VSID_LP) >> 4);
+ va |= sllp << 5;
asm volatile(".long 0x7c000224 | (%0 << 11) | (0 << 21)"
: : "r"(va) : "memory");
break;
@@ -554,6 +560,7 @@ static void hpte_decode(struct hash_pte *hpte, unsigned long slot,
seg_off |= vpi << shift;
}
*vpn = vsid << (SID_SHIFT - VPN_SHIFT) | seg_off >> VPN_SHIFT;
+ break;
case MMU_SEGSIZE_1T:
/* We only have 40 - 23 bits of seg_off in avpn */
seg_off = (avpn & 0x1ffff) << 23;
@@ -563,6 +570,7 @@ static void hpte_decode(struct hash_pte *hpte, unsigned long slot,
seg_off |= vpi << shift;
}
*vpn = vsid << (SID_SHIFT_1T - VPN_SHIFT) | seg_off >> VPN_SHIFT;
+ break;
default:
*vpn = size = 0;
}
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 08397217e8a..5850798826c 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -27,6 +27,7 @@
#include <linux/seq_file.h>
#include <linux/uaccess.h>
#include <linux/slab.h>
+#include <asm/cputhreads.h>
#include <asm/sparsemem.h>
#include <asm/prom.h>
#include <asm/smp.h>
@@ -1318,7 +1319,8 @@ static int update_cpu_associativity_changes_mask(void)
}
}
if (changed) {
- cpumask_set_cpu(cpu, changes);
+ cpumask_or(changes, changes, cpu_sibling_mask(cpu));
+ cpu = cpu_last_thread_sibling(cpu);
}
}
@@ -1426,7 +1428,7 @@ static int update_cpu_topology(void *data)
if (!data)
return -EINVAL;
- cpu = get_cpu();
+ cpu = smp_processor_id();
for (update = data; update; update = update->next) {
if (cpu != update->cpu)
@@ -1446,12 +1448,12 @@ static int update_cpu_topology(void *data)
*/
int arch_update_cpu_topology(void)
{
- unsigned int cpu, changed = 0;
+ unsigned int cpu, sibling, changed = 0;
struct topology_update_data *updates, *ud;
unsigned int associativity[VPHN_ASSOC_BUFSIZE] = {0};
cpumask_t updated_cpus;
struct device *dev;
- int weight, i = 0;
+ int weight, new_nid, i = 0;
weight = cpumask_weight(&cpu_associativity_changes_mask);
if (!weight)
@@ -1464,19 +1466,46 @@ int arch_update_cpu_topology(void)
cpumask_clear(&updated_cpus);
for_each_cpu(cpu, &cpu_associativity_changes_mask) {
- ud = &updates[i++];
- ud->cpu = cpu;
- vphn_get_associativity(cpu, associativity);
- ud->new_nid = associativity_to_nid(associativity);
-
- if (ud->new_nid < 0 || !node_online(ud->new_nid))
- ud->new_nid = first_online_node;
+ /*
+ * If siblings aren't flagged for changes, updates list
+ * will be too short. Skip on this update and set for next
+ * update.
+ */
+ if (!cpumask_subset(cpu_sibling_mask(cpu),
+ &cpu_associativity_changes_mask)) {
+ pr_info("Sibling bits not set for associativity "
+ "change, cpu%d\n", cpu);
+ cpumask_or(&cpu_associativity_changes_mask,
+ &cpu_associativity_changes_mask,
+ cpu_sibling_mask(cpu));
+ cpu = cpu_last_thread_sibling(cpu);
+ continue;
+ }
- ud->old_nid = numa_cpu_lookup_table[cpu];
- cpumask_set_cpu(cpu, &updated_cpus);
+ /* Use associativity from first thread for all siblings */
+ vphn_get_associativity(cpu, associativity);
+ new_nid = associativity_to_nid(associativity);
+ if (new_nid < 0 || !node_online(new_nid))
+ new_nid = first_online_node;
+
+ if (new_nid == numa_cpu_lookup_table[cpu]) {
+ cpumask_andnot(&cpu_associativity_changes_mask,
+ &cpu_associativity_changes_mask,
+ cpu_sibling_mask(cpu));
+ cpu = cpu_last_thread_sibling(cpu);
+ continue;
+ }
- if (i < weight)
- ud->next = &updates[i];
+ for_each_cpu(sibling, cpu_sibling_mask(cpu)) {
+ ud = &updates[i++];
+ ud->cpu = sibling;
+ ud->new_nid = new_nid;
+ ud->old_nid = numa_cpu_lookup_table[sibling];
+ cpumask_set_cpu(sibling, &updated_cpus);
+ if (i < weight)
+ ud->next = &updates[i];
+ }
+ cpu = cpu_last_thread_sibling(cpu);
}
stop_machine(update_cpu_topology, &updates[0], &updated_cpus);
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index a3985aee77f..eeae308cf98 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -484,7 +484,7 @@ static bool is_ebb_event(struct perf_event *event)
* use bit 63 of the event code for something else if they wish.
*/
return (ppmu->flags & PPMU_EBB) &&
- ((event->attr.config >> EVENT_CONFIG_EBB_SHIFT) & 1);
+ ((event->attr.config >> PERF_EVENT_CONFIG_EBB_SHIFT) & 1);
}
static int ebb_event_check(struct perf_event *event)
@@ -1252,8 +1252,11 @@ nocheck:
ret = 0;
out:
- if (has_branch_stack(event))
+ if (has_branch_stack(event)) {
power_pmu_bhrb_enable(event);
+ cpuhw->bhrb_filter = ppmu->bhrb_filter_map(
+ event->attr.branch_sample_type);
+ }
perf_pmu_enable(event->pmu);
local_irq_restore(flags);
diff --git a/arch/powerpc/perf/power8-pmu.c b/arch/powerpc/perf/power8-pmu.c
index 96a64d6a8bd..2ee4a707f0d 100644
--- a/arch/powerpc/perf/power8-pmu.c
+++ b/arch/powerpc/perf/power8-pmu.c
@@ -118,7 +118,7 @@
(EVENT_UNIT_MASK << EVENT_UNIT_SHIFT) | \
(EVENT_COMBINE_MASK << EVENT_COMBINE_SHIFT) | \
(EVENT_MARKED_MASK << EVENT_MARKED_SHIFT) | \
- (EVENT_EBB_MASK << EVENT_CONFIG_EBB_SHIFT) | \
+ (EVENT_EBB_MASK << PERF_EVENT_CONFIG_EBB_SHIFT) | \
EVENT_PSEL_MASK)
/* MMCRA IFM bits - POWER8 */
@@ -233,10 +233,10 @@ static int power8_get_constraint(u64 event, unsigned long *maskp, unsigned long
pmc = (event >> EVENT_PMC_SHIFT) & EVENT_PMC_MASK;
unit = (event >> EVENT_UNIT_SHIFT) & EVENT_UNIT_MASK;
cache = (event >> EVENT_CACHE_SEL_SHIFT) & EVENT_CACHE_SEL_MASK;
- ebb = (event >> EVENT_CONFIG_EBB_SHIFT) & EVENT_EBB_MASK;
+ ebb = (event >> PERF_EVENT_CONFIG_EBB_SHIFT) & EVENT_EBB_MASK;
/* Clear the EBB bit in the event, so event checks work below */
- event &= ~(EVENT_EBB_MASK << EVENT_CONFIG_EBB_SHIFT);
+ event &= ~(EVENT_EBB_MASK << PERF_EVENT_CONFIG_EBB_SHIFT);
if (pmc) {
if (pmc > 6)
@@ -561,18 +561,13 @@ static int power8_generic_events[] = {
static u64 power8_bhrb_filter_map(u64 branch_sample_type)
{
u64 pmu_bhrb_filter = 0;
- u64 br_privilege = branch_sample_type & ONLY_PLM;
- /* BHRB and regular PMU events share the same prvillege state
+ /* BHRB and regular PMU events share the same privilege state
* filter configuration. BHRB is always recorded along with a
- * regular PMU event. So privilege state filter criteria for BHRB
- * and the companion PMU events has to be the same. As a default
- * "perf record" tool sets all privillege bits ON when no filter
- * criteria is provided in the command line. So as along as all
- * privillege bits are ON or they are OFF, we are good to go.
+ * regular PMU event. As the privilege state filter is handled
+ * in the basic PMC configuration of the accompanying regular
+ * PMU event, we ignore any separate BHRB specific request.
*/
- if ((br_privilege != 7) && (br_privilege != 0))
- return -1;
/* No branch filter requested */
if (branch_sample_type & PERF_SAMPLE_BRANCH_ANY)
@@ -621,10 +616,19 @@ static struct power_pmu power8_pmu = {
static int __init init_power8_pmu(void)
{
+ int rc;
+
if (!cur_cpu_spec->oprofile_cpu_type ||
strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power8"))
return -ENODEV;
- return register_power_pmu(&power8_pmu);
+ rc = register_power_pmu(&power8_pmu);
+ if (rc)
+ return rc;
+
+ /* Tell userspace that EBB is supported */
+ cur_cpu_spec->cpu_user_features2 |= PPC_FEATURE2_EBB;
+
+ return 0;
}
early_initcall(init_power8_pmu);
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 969cce73055..79663d26e6e 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -114,7 +114,7 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
* the root bridge. So it's not reasonable to continue
* the probing.
*/
- if (!dn || !edev)
+ if (!dn || !edev || edev->pe)
return 0;
/* Skip for PCI-ISA bridge */
@@ -122,8 +122,19 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
return 0;
/* Initialize eeh device */
- edev->class_code = dev->class;
- edev->mode = 0;
+ edev->class_code = dev->class;
+ edev->mode &= 0xFFFFFF00;
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+ edev->mode |= EEH_DEV_BRIDGE;
+ if (pci_is_pcie(dev)) {
+ edev->pcie_cap = pci_pcie_cap(dev);
+
+ if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT)
+ edev->mode |= EEH_DEV_ROOT_PORT;
+ else if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM)
+ edev->mode |= EEH_DEV_DS_PORT;
+ }
+
edev->config_addr = ((dev->bus->number << 8) | dev->devfn);
edev->pe_config_addr = phb->bdfn_to_pe(phb, dev->bus, dev->devfn & 0xff);
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 49b57b9f835..d8140b125e6 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1266,7 +1266,7 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
opal_pci_set_pe(phb_id, 0, 0, 7, 1, 1 , OPAL_MAP_PE);
}
-void pnv_pci_init_ioda2_phb(struct device_node *np)
+void __init pnv_pci_init_ioda2_phb(struct device_node *np)
{
pnv_pci_init_ioda_phb(np, 0, PNV_PHB_IODA2);
}
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 1bd3399146e..62b4f8025de 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -19,7 +19,6 @@ config PPC_PSERIES
select ZLIB_DEFLATE
select PPC_DOORBELL
select HAVE_CONTEXT_TRACKING
- select HOTPLUG if SMP
select HOTPLUG_CPU if SMP
default y
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index b456b157d33..7fbc25b1813 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -133,6 +133,48 @@ static int pseries_eeh_init(void)
return 0;
}
+static int pseries_eeh_cap_start(struct device_node *dn)
+{
+ struct pci_dn *pdn = PCI_DN(dn);
+ u32 status;
+
+ if (!pdn)
+ return 0;
+
+ rtas_read_config(pdn, PCI_STATUS, 2, &status);
+ if (!(status & PCI_STATUS_CAP_LIST))
+ return 0;
+
+ return PCI_CAPABILITY_LIST;
+}
+
+
+static int pseries_eeh_find_cap(struct device_node *dn, int cap)
+{
+ struct pci_dn *pdn = PCI_DN(dn);
+ int pos = pseries_eeh_cap_start(dn);
+ int cnt = 48; /* Maximal number of capabilities */
+ u32 id;
+
+ if (!pos)
+ return 0;
+
+ while (cnt--) {
+ rtas_read_config(pdn, pos, 1, &pos);
+ if (pos < 0x40)
+ break;
+ pos &= ~3;
+ rtas_read_config(pdn, pos + PCI_CAP_LIST_ID, 1, &id);
+ if (id == 0xff)
+ break;
+ if (id == cap)
+ return pos;
+ pos += PCI_CAP_LIST_NEXT;
+ }
+
+ return 0;
+}
+
/**
* pseries_eeh_of_probe - EEH probe on the given device
* @dn: OF node
@@ -146,14 +188,16 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
{
struct eeh_dev *edev;
struct eeh_pe pe;
+ struct pci_dn *pdn = PCI_DN(dn);
const u32 *class_code, *vendor_id, *device_id;
const u32 *regs;
+ u32 pcie_flags;
int enable = 0;
int ret;
/* Retrieve OF node and eeh device */
edev = of_node_to_eeh_dev(dn);
- if (!of_device_is_available(dn))
+ if (edev->pe || !of_device_is_available(dn))
return NULL;
/* Retrieve class/vendor/device IDs */
@@ -167,9 +211,26 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
if (dn->type && !strcmp(dn->type, "isa"))
return NULL;
- /* Update class code and mode of eeh device */
+ /*
+ * Update class code and mode of eeh device. We need
+ * correctly reflects that current device is root port
+ * or PCIe switch downstream port.
+ */
edev->class_code = *class_code;
- edev->mode = 0;
+ edev->pcie_cap = pseries_eeh_find_cap(dn, PCI_CAP_ID_EXP);
+ edev->mode &= 0xFFFFFF00;
+ if ((edev->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) {
+ edev->mode |= EEH_DEV_BRIDGE;
+ if (edev->pcie_cap) {
+ rtas_read_config(pdn, edev->pcie_cap + PCI_EXP_FLAGS,
+ 2, &pcie_flags);
+ pcie_flags = (pcie_flags & PCI_EXP_FLAGS_TYPE) >> 4;
+ if (pcie_flags == PCI_EXP_TYPE_ROOT_PORT)
+ edev->mode |= EEH_DEV_ROOT_PORT;
+ else if (pcie_flags == PCI_EXP_TYPE_DOWNSTREAM)
+ edev->mode |= EEH_DEV_DS_PORT;
+ }
+ }
/* Retrieve the device address */
regs = of_get_property(dn, "reg", NULL);
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 02d6e21619b..8bad880bd17 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -146,7 +146,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
flags = 0;
/* Make pHyp happy */
- if ((rflags & _PAGE_NO_CACHE) & !(rflags & _PAGE_WRITETHRU))
+ if ((rflags & _PAGE_NO_CACHE) && !(rflags & _PAGE_WRITETHRU))
hpte_r &= ~_PAGE_COHERENT;
if (firmware_has_feature(FW_FEATURE_XCMO) && !(hpte_r & HPTE_R_N))
flags |= H_COALESCE_CAND;
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 7b3cbde8c78..721c0586b28 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -287,6 +287,9 @@ static struct rtas_error_log *fwnmi_get_errinfo(struct pt_regs *regs)
unsigned long *savep;
struct rtas_error_log *h, *errhdr = NULL;
+ /* Mask top two bits */
+ regs->gpr[3] &= ~(0x3UL << 62);
+
if (!VALID_FWNMI_BUFFER(regs->gpr[3])) {
printk(KERN_ERR "FWNMI: corrupt r3 0x%016lx\n", regs->gpr[3]);
return NULL;
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index 6b499870662..b0e6435b2f0 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -91,7 +91,15 @@ struct thread_struct {
#endif
};
-#define PER_FLAG_NO_TE 1UL /* Flag to disable transactions. */
+/* Flag to disable transactions. */
+#define PER_FLAG_NO_TE 1UL
+/* Flag to enable random transaction aborts. */
+#define PER_FLAG_TE_ABORT_RAND 2UL
+/* Flag to specify random transaction abort mode:
+ * - abort each transaction at a random instruction before TEND if set.
+ * - abort random transactions at a random instruction if cleared.
+ */
+#define PER_FLAG_TE_ABORT_RAND_TEND 4UL
typedef struct thread_struct thread_struct;
diff --git a/arch/s390/include/asm/switch_to.h b/arch/s390/include/asm/switch_to.h
index f3a9e0f9270..80b6f11263c 100644
--- a/arch/s390/include/asm/switch_to.h
+++ b/arch/s390/include/asm/switch_to.h
@@ -10,7 +10,7 @@
#include <linux/thread_info.h>
extern struct task_struct *__switch_to(void *, void *);
-extern void update_per_regs(struct task_struct *task);
+extern void update_cr_regs(struct task_struct *task);
static inline void save_fp_regs(s390_fp_regs *fpregs)
{
@@ -86,7 +86,7 @@ static inline void restore_access_regs(unsigned int *acrs)
restore_fp_regs(&next->thread.fp_regs); \
restore_access_regs(&next->thread.acrs[0]); \
restore_ri_cb(next->thread.ri_cb, prev->thread.ri_cb); \
- update_per_regs(next); \
+ update_cr_regs(next); \
} \
prev = __switch_to(prev,next); \
} while (0)
diff --git a/arch/s390/include/uapi/asm/ptrace.h b/arch/s390/include/uapi/asm/ptrace.h
index 3aa9f1ec5b2..7a84619e315 100644
--- a/arch/s390/include/uapi/asm/ptrace.h
+++ b/arch/s390/include/uapi/asm/ptrace.h
@@ -400,6 +400,7 @@ typedef struct
#define PTRACE_POKE_SYSTEM_CALL 0x5008
#define PTRACE_ENABLE_TE 0x5009
#define PTRACE_DISABLE_TE 0x5010
+#define PTRACE_TE_ABORT_RAND 0x5011
/*
* PT_PROT definition is loosely based on hppa bsd definition in
diff --git a/arch/s390/kernel/crash_dump.c b/arch/s390/kernel/crash_dump.c
index f703d91bf72..d8f35565717 100644
--- a/arch/s390/kernel/crash_dump.c
+++ b/arch/s390/kernel/crash_dump.c
@@ -21,6 +21,48 @@
#define PTR_SUB(x, y) (((char *) (x)) - ((unsigned long) (y)))
#define PTR_DIFF(x, y) ((unsigned long)(((char *) (x)) - ((unsigned long) (y))))
+
+/*
+ * Return physical address for virtual address
+ */
+static inline void *load_real_addr(void *addr)
+{
+ unsigned long real_addr;
+
+ asm volatile(
+ " lra %0,0(%1)\n"
+ " jz 0f\n"
+ " la %0,0\n"
+ "0:"
+ : "=a" (real_addr) : "a" (addr) : "cc");
+ return (void *)real_addr;
+}
+
+/*
+ * Copy up to one page to vmalloc or real memory
+ */
+static ssize_t copy_page_real(void *buf, void *src, size_t csize)
+{
+ size_t size;
+
+ if (is_vmalloc_addr(buf)) {
+ BUG_ON(csize >= PAGE_SIZE);
+ /* If buf is not page aligned, copy first part */
+ size = min(roundup(__pa(buf), PAGE_SIZE) - __pa(buf), csize);
+ if (size) {
+ if (memcpy_real(load_real_addr(buf), src, size))
+ return -EFAULT;
+ buf += size;
+ src += size;
+ }
+ /* Copy second part */
+ size = csize - size;
+ return (size) ? memcpy_real(load_real_addr(buf), src, size) : 0;
+ } else {
+ return memcpy_real(buf, src, csize);
+ }
+}
+
/*
* Copy one page from "oldmem"
*
@@ -32,6 +74,7 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
size_t csize, unsigned long offset, int userbuf)
{
unsigned long src;
+ int rc;
if (!csize)
return 0;
@@ -43,11 +86,11 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
src < OLDMEM_BASE + OLDMEM_SIZE)
src -= OLDMEM_BASE;
if (userbuf)
- copy_to_user_real((void __force __user *) buf, (void *) src,
- csize);
+ rc = copy_to_user_real((void __force __user *) buf,
+ (void *) src, csize);
else
- memcpy_real(buf, (void *) src, csize);
- return csize;
+ rc = copy_page_real(buf, (void *) src, csize);
+ return (rc == 0) ? csize : rc;
}
/*
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index a314c57f4e9..e9fadb04e3c 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -47,7 +47,7 @@ enum s390_regset {
REGSET_GENERAL_EXTENDED,
};
-void update_per_regs(struct task_struct *task)
+void update_cr_regs(struct task_struct *task)
{
struct pt_regs *regs = task_pt_regs(task);
struct thread_struct *thread = &task->thread;
@@ -56,17 +56,25 @@ void update_per_regs(struct task_struct *task)
#ifdef CONFIG_64BIT
/* Take care of the enable/disable of transactional execution. */
if (MACHINE_HAS_TE) {
- unsigned long cr0, cr0_new;
+ unsigned long cr[3], cr_new[3];
- __ctl_store(cr0, 0, 0);
- /* set or clear transaction execution bits 8 and 9. */
+ __ctl_store(cr, 0, 2);
+ cr_new[1] = cr[1];
+ /* Set or clear transaction execution TXC/PIFO bits 8 and 9. */
if (task->thread.per_flags & PER_FLAG_NO_TE)
- cr0_new = cr0 & ~(3UL << 54);
+ cr_new[0] = cr[0] & ~(3UL << 54);
else
- cr0_new = cr0 | (3UL << 54);
- /* Only load control register 0 if necessary. */
- if (cr0 != cr0_new)
- __ctl_load(cr0_new, 0, 0);
+ cr_new[0] = cr[0] | (3UL << 54);
+ /* Set or clear transaction execution TDC bits 62 and 63. */
+ cr_new[2] = cr[2] & ~3UL;
+ if (task->thread.per_flags & PER_FLAG_TE_ABORT_RAND) {
+ if (task->thread.per_flags & PER_FLAG_TE_ABORT_RAND_TEND)
+ cr_new[2] |= 1UL;
+ else
+ cr_new[2] |= 2UL;
+ }
+ if (memcmp(&cr_new, &cr, sizeof(cr)))
+ __ctl_load(cr_new, 0, 2);
}
#endif
/* Copy user specified PER registers */
@@ -100,14 +108,14 @@ void user_enable_single_step(struct task_struct *task)
{
set_tsk_thread_flag(task, TIF_SINGLE_STEP);
if (task == current)
- update_per_regs(task);
+ update_cr_regs(task);
}
void user_disable_single_step(struct task_struct *task)
{
clear_tsk_thread_flag(task, TIF_SINGLE_STEP);
if (task == current)
- update_per_regs(task);
+ update_cr_regs(task);
}
/*
@@ -447,6 +455,26 @@ long arch_ptrace(struct task_struct *child, long request,
if (!MACHINE_HAS_TE)
return -EIO;
child->thread.per_flags |= PER_FLAG_NO_TE;
+ child->thread.per_flags &= ~PER_FLAG_TE_ABORT_RAND;
+ return 0;
+ case PTRACE_TE_ABORT_RAND:
+ if (!MACHINE_HAS_TE || (child->thread.per_flags & PER_FLAG_NO_TE))
+ return -EIO;
+ switch (data) {
+ case 0UL:
+ child->thread.per_flags &= ~PER_FLAG_TE_ABORT_RAND;
+ break;
+ case 1UL:
+ child->thread.per_flags |= PER_FLAG_TE_ABORT_RAND;
+ child->thread.per_flags |= PER_FLAG_TE_ABORT_RAND_TEND;
+ break;
+ case 2UL:
+ child->thread.per_flags |= PER_FLAG_TE_ABORT_RAND;
+ child->thread.per_flags &= ~PER_FLAG_TE_ABORT_RAND_TEND;
+ break;
+ default:
+ return -EINVAL;
+ }
return 0;
default:
/* Removing high order bit from addr (only for 31 bit). */
diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index 82f165f8078..d5f10a43a58 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -9,6 +9,8 @@
#include <linux/netdevice.h>
#include <linux/if_vlan.h>
#include <linux/filter.h>
+#include <linux/random.h>
+#include <linux/init.h>
#include <asm/cacheflush.h>
#include <asm/processor.h>
#include <asm/facility.h>
@@ -221,6 +223,37 @@ static void bpf_jit_epilogue(struct bpf_jit *jit)
EMIT2(0x07fe);
}
+/* Helper to find the offset of pkt_type in sk_buff
+ * Make sure its still a 3bit field starting at the MSBs within a byte.
+ */
+#define PKT_TYPE_MAX 0xe0
+static int pkt_type_offset;
+
+static int __init bpf_pkt_type_offset_init(void)
+{
+ struct sk_buff skb_probe = {
+ .pkt_type = ~0,
+ };
+ char *ct = (char *)&skb_probe;
+ int off;
+
+ pkt_type_offset = -1;
+ for (off = 0; off < sizeof(struct sk_buff); off++) {
+ if (!ct[off])
+ continue;
+ if (ct[off] == PKT_TYPE_MAX)
+ pkt_type_offset = off;
+ else {
+ /* Found non matching bit pattern, fix needed. */
+ WARN_ON_ONCE(1);
+ pkt_type_offset = -1;
+ return -1;
+ }
+ }
+ return 0;
+}
+device_initcall(bpf_pkt_type_offset_init);
+
/*
* make sure we dont leak kernel information to user
*/
@@ -720,6 +753,16 @@ call_fn: /* lg %r1,<d(function)>(%r13) */
EMIT4_DISP(0x88500000, 12);
}
break;
+ case BPF_S_ANC_PKTTYPE:
+ if (pkt_type_offset < 0)
+ goto out;
+ /* lhi %r5,0 */
+ EMIT4(0xa7580000);
+ /* ic %r5,<d(pkt_type_offset)>(%r2) */
+ EMIT4_DISP(0x43502000, pkt_type_offset);
+ /* srl %r5,5 */
+ EMIT4_DISP(0x88500000, 5);
+ break;
case BPF_S_ANC_CPU: /* A = smp_processor_id() */
#ifdef CONFIG_SMP
/* l %r5,<d(cpu_nr)> */
@@ -738,8 +781,41 @@ out:
return -1;
}
+/*
+ * Note: for security reasons, bpf code will follow a randomly
+ * sized amount of illegal instructions.
+ */
+struct bpf_binary_header {
+ unsigned int pages;
+ u8 image[];
+};
+
+static struct bpf_binary_header *bpf_alloc_binary(unsigned int bpfsize,
+ u8 **image_ptr)
+{
+ struct bpf_binary_header *header;
+ unsigned int sz, hole;
+
+ /* Most BPF filters are really small, but if some of them fill a page,
+ * allow at least 128 extra bytes for illegal instructions.
+ */
+ sz = round_up(bpfsize + sizeof(*header) + 128, PAGE_SIZE);
+ header = module_alloc(sz);
+ if (!header)
+ return NULL;
+ memset(header, 0, sz);
+ header->pages = sz / PAGE_SIZE;
+ hole = sz - bpfsize + sizeof(*header);
+ /* Insert random number of illegal instructions before BPF code
+ * and make sure the first instruction starts at an even address.
+ */
+ *image_ptr = &header->image[(prandom_u32() % hole) & -2];
+ return header;
+}
+
void bpf_jit_compile(struct sk_filter *fp)
{
+ struct bpf_binary_header *header = NULL;
unsigned long size, prg_len, lit_len;
struct bpf_jit jit, cjit;
unsigned int *addrs;
@@ -772,12 +848,11 @@ void bpf_jit_compile(struct sk_filter *fp)
} else if (jit.prg == cjit.prg && jit.lit == cjit.lit) {
prg_len = jit.prg - jit.start;
lit_len = jit.lit - jit.mid;
- size = max_t(unsigned long, prg_len + lit_len,
- sizeof(struct work_struct));
+ size = prg_len + lit_len;
if (size >= BPF_SIZE_MAX)
goto out;
- jit.start = module_alloc(size);
- if (!jit.start)
+ header = bpf_alloc_binary(size, &jit.start);
+ if (!header)
goto out;
jit.prg = jit.mid = jit.start + prg_len;
jit.lit = jit.end = jit.start + prg_len + lit_len;
@@ -788,37 +863,25 @@ void bpf_jit_compile(struct sk_filter *fp)
cjit = jit;
}
if (bpf_jit_enable > 1) {
- pr_err("flen=%d proglen=%lu pass=%d image=%p\n",
- fp->len, jit.end - jit.start, pass, jit.start);
- if (jit.start) {
- printk(KERN_ERR "JIT code:\n");
+ bpf_jit_dump(fp->len, jit.end - jit.start, pass, jit.start);
+ if (jit.start)
print_fn_code(jit.start, jit.mid - jit.start);
- print_hex_dump(KERN_ERR, "JIT literals:\n",
- DUMP_PREFIX_ADDRESS, 16, 1,
- jit.mid, jit.end - jit.mid, false);
- }
}
- if (jit.start)
+ if (jit.start) {
+ set_memory_ro((unsigned long)header, header->pages);
fp->bpf_func = (void *) jit.start;
+ }
out:
kfree(addrs);
}
-static void jit_free_defer(struct work_struct *arg)
-{
- module_free(NULL, arg);
-}
-
-/* run from softirq, we must use a work_struct to call
- * module_free() from process context
- */
void bpf_jit_free(struct sk_filter *fp)
{
- struct work_struct *work;
+ unsigned long addr = (unsigned long)fp->bpf_func & PAGE_MASK;
+ struct bpf_binary_header *header = (void *)addr;
if (fp->bpf_func == sk_run_filter)
return;
- work = (struct work_struct *)fp->bpf_func;
- INIT_WORK(work, jit_free_defer);
- schedule_work(work);
+ set_memory_rw(addr, header->pages);
+ module_free(NULL, header);
}
diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig
index 2051821724c..0cf4097b71e 100644
--- a/arch/sh/configs/sh03_defconfig
+++ b/arch/sh/configs/sh03_defconfig
@@ -22,7 +22,7 @@ CONFIG_PREEMPT=y
CONFIG_CMDLINE_OVERWRITE=y
CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs"
CONFIG_PCI=y
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/um/include/shared/frame_kern.h b/arch/um/include/shared/frame_kern.h
index e584e40ee83..f2ca5702a4e 100644
--- a/arch/um/include/shared/frame_kern.h
+++ b/arch/um/include/shared/frame_kern.h
@@ -6,13 +6,13 @@
#ifndef __FRAME_KERN_H_
#define __FRAME_KERN_H_
-extern int setup_signal_stack_sc(unsigned long stack_top, int sig,
+extern int setup_signal_stack_sc(unsigned long stack_top, int sig,
struct k_sigaction *ka,
- struct pt_regs *regs,
+ struct pt_regs *regs,
sigset_t *mask);
-extern int setup_signal_stack_si(unsigned long stack_top, int sig,
+extern int setup_signal_stack_si(unsigned long stack_top, int sig,
struct k_sigaction *ka,
- struct pt_regs *regs, siginfo_t *info,
+ struct pt_regs *regs, struct siginfo *info,
sigset_t *mask);
#endif
diff --git a/arch/um/kernel/signal.c b/arch/um/kernel/signal.c
index 3e831b3fd07..f57e02e7910 100644
--- a/arch/um/kernel/signal.c
+++ b/arch/um/kernel/signal.c
@@ -19,7 +19,7 @@ EXPORT_SYMBOL(unblock_signals);
* OK, we're invoking a handler
*/
static void handle_signal(struct pt_regs *regs, unsigned long signr,
- struct k_sigaction *ka, siginfo_t *info)
+ struct k_sigaction *ka, struct siginfo *info)
{
sigset_t *oldset = sigmask_to_save();
int singlestep = 0;
@@ -71,7 +71,7 @@ static void handle_signal(struct pt_regs *regs, unsigned long signr,
static int kern_do_signal(struct pt_regs *regs)
{
struct k_sigaction ka_copy;
- siginfo_t info;
+ struct siginfo info;
int sig, handled_sig = 0;
while ((sig = get_signal_to_deliver(&info, &ka_copy, regs, NULL)) > 0) {
diff --git a/arch/um/kernel/skas/mmu.c b/arch/um/kernel/skas/mmu.c
index ff03067a3b1..007d5503f49 100644
--- a/arch/um/kernel/skas/mmu.c
+++ b/arch/um/kernel/skas/mmu.c
@@ -123,7 +123,7 @@ void uml_setup_stubs(struct mm_struct *mm)
/* dup_mmap already holds mmap_sem */
err = install_special_mapping(mm, STUB_START, STUB_END - STUB_START,
VM_READ | VM_MAYREAD | VM_EXEC |
- VM_MAYEXEC | VM_DONTCOPY,
+ VM_MAYEXEC | VM_DONTCOPY | VM_PFNMAP,
mm->context.stub_pages);
if (err) {
printk(KERN_ERR "install_special_mapping returned %d\n", err);
diff --git a/arch/um/kernel/skas/uaccess.c b/arch/um/kernel/skas/uaccess.c
index 1d3e0c17340..4ffb644d6c0 100644
--- a/arch/um/kernel/skas/uaccess.c
+++ b/arch/um/kernel/skas/uaccess.c
@@ -254,6 +254,6 @@ int strnlen_user(const void __user *str, int len)
n = buffer_op((unsigned long) str, len, 0, strnlen_chunk, &count);
if (n == 0)
return count + 1;
- return -EFAULT;
+ return 0;
}
EXPORT_SYMBOL(strnlen_user);
diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c
index ba4398056fe..3c4af77e51a 100644
--- a/arch/um/os-Linux/mem.c
+++ b/arch/um/os-Linux/mem.c
@@ -53,6 +53,25 @@ static void __init find_tempdir(void)
}
/*
+ * Remove bytes from the front of the buffer and refill it so that if there's a
+ * partial string that we care about, it will be completed, and we can recognize
+ * it.
+ */
+static int pop(int fd, char *buf, size_t size, size_t npop)
+{
+ ssize_t n;
+ size_t len = strlen(&buf[npop]);
+
+ memmove(buf, &buf[npop], len + 1);
+ n = read(fd, &buf[len], size - len - 1);
+ if (n < 0)
+ return -errno;
+
+ buf[len + n] = '\0';
+ return 1;
+}
+
+/*
* This will return 1, with the first character in buf being the
* character following the next instance of c in the file. This will
* read the file as needed. If there's an error, -errno is returned;
@@ -61,7 +80,6 @@ static void __init find_tempdir(void)
static int next(int fd, char *buf, size_t size, char c)
{
ssize_t n;
- size_t len;
char *ptr;
while ((ptr = strchr(buf, c)) == NULL) {
@@ -74,20 +92,129 @@ static int next(int fd, char *buf, size_t size, char c)
buf[n] = '\0';
}
- ptr++;
- len = strlen(ptr);
- memmove(buf, ptr, len + 1);
+ return pop(fd, buf, size, ptr - buf + 1);
+}
+
+/*
+ * Decode an octal-escaped and space-terminated path of the form used by
+ * /proc/mounts. May be used to decode a path in-place. "out" must be at least
+ * as large as the input. The output is always null-terminated. "len" gets the
+ * length of the output, excluding the trailing null. Returns 0 if a full path
+ * was successfully decoded, otherwise an error.
+ */
+static int decode_path(const char *in, char *out, size_t *len)
+{
+ char *first = out;
+ int c;
+ int i;
+ int ret = -EINVAL;
+ while (1) {
+ switch (*in) {
+ case '\0':
+ goto out;
+
+ case ' ':
+ ret = 0;
+ goto out;
+
+ case '\\':
+ in++;
+ c = 0;
+ for (i = 0; i < 3; i++) {
+ if (*in < '0' || *in > '7')
+ goto out;
+ c = (c << 3) | (*in++ - '0');
+ }
+ *(unsigned char *)out++ = (unsigned char) c;
+ break;
+
+ default:
+ *out++ = *in++;
+ break;
+ }
+ }
+
+out:
+ *out = '\0';
+ *len = out - first;
+ return ret;
+}
+
+/*
+ * Computes the length of s when encoded with three-digit octal escape sequences
+ * for the characters in chars.
+ */
+static size_t octal_encoded_length(const char *s, const char *chars)
+{
+ size_t len = strlen(s);
+ while ((s = strpbrk(s, chars)) != NULL) {
+ len += 3;
+ s++;
+ }
+
+ return len;
+}
+
+enum {
+ OUTCOME_NOTHING_MOUNTED,
+ OUTCOME_TMPFS_MOUNT,
+ OUTCOME_NON_TMPFS_MOUNT,
+};
+
+/* Read a line of /proc/mounts data looking for a tmpfs mount at "path". */
+static int read_mount(int fd, char *buf, size_t bufsize, const char *path,
+ int *outcome)
+{
+ int found;
+ int match;
+ char *space;
+ size_t len;
+
+ enum {
+ MATCH_NONE,
+ MATCH_EXACT,
+ MATCH_PARENT,
+ };
+
+ found = next(fd, buf, bufsize, ' ');
+ if (found != 1)
+ return found;
/*
- * Refill the buffer so that if there's a partial string that we care
- * about, it will be completed, and we can recognize it.
+ * If there's no following space in the buffer, then this path is
+ * truncated, so it can't be the one we're looking for.
*/
- n = read(fd, &buf[len], size - len - 1);
- if (n < 0)
- return -errno;
+ space = strchr(buf, ' ');
+ if (space) {
+ match = MATCH_NONE;
+ if (!decode_path(buf, buf, &len)) {
+ if (!strcmp(buf, path))
+ match = MATCH_EXACT;
+ else if (!strncmp(buf, path, len)
+ && (path[len] == '/' || !strcmp(buf, "/")))
+ match = MATCH_PARENT;
+ }
+
+ found = pop(fd, buf, bufsize, space - buf + 1);
+ if (found != 1)
+ return found;
+
+ switch (match) {
+ case MATCH_EXACT:
+ if (!strncmp(buf, "tmpfs", strlen("tmpfs")))
+ *outcome = OUTCOME_TMPFS_MOUNT;
+ else
+ *outcome = OUTCOME_NON_TMPFS_MOUNT;
+ break;
- buf[len + n] = '\0';
- return 1;
+ case MATCH_PARENT:
+ /* This mount obscures any previous ones. */
+ *outcome = OUTCOME_NOTHING_MOUNTED;
+ break;
+ }
+ }
+
+ return next(fd, buf, bufsize, '\n');
}
/* which_tmpdir is called only during early boot */
@@ -106,8 +233,12 @@ static int checked_tmpdir = 0;
*/
static void which_tmpdir(void)
{
- int fd, found;
- char buf[128] = { '\0' };
+ int fd;
+ int found;
+ int outcome;
+ char *path;
+ char *buf;
+ size_t bufsize;
if (checked_tmpdir)
return;
@@ -116,49 +247,66 @@ static void which_tmpdir(void)
printf("Checking for tmpfs mount on /dev/shm...");
+ path = realpath("/dev/shm", NULL);
+ if (!path) {
+ printf("failed to check real path, errno = %d\n", errno);
+ return;
+ }
+ printf("%s...", path);
+
+ /*
+ * The buffer needs to be able to fit the full octal-escaped path, a
+ * space, and a trailing null in order to successfully decode it.
+ */
+ bufsize = octal_encoded_length(path, " \t\n\\") + 2;
+
+ if (bufsize < 128)
+ bufsize = 128;
+
+ buf = malloc(bufsize);
+ if (!buf) {
+ printf("malloc failed, errno = %d\n", errno);
+ goto out;
+ }
+ buf[0] = '\0';
+
fd = open("/proc/mounts", O_RDONLY);
if (fd < 0) {
printf("failed to open /proc/mounts, errno = %d\n", errno);
- return;
+ goto out1;
}
+ outcome = OUTCOME_NOTHING_MOUNTED;
while (1) {
- found = next(fd, buf, ARRAY_SIZE(buf), ' ');
- if (found != 1)
- break;
-
- if (!strncmp(buf, "/dev/shm", strlen("/dev/shm")))
- goto found;
-
- found = next(fd, buf, ARRAY_SIZE(buf), '\n');
+ found = read_mount(fd, buf, bufsize, path, &outcome);
if (found != 1)
break;
}
-err:
- if (found == 0)
- printf("nothing mounted on /dev/shm\n");
- else if (found < 0)
+ if (found < 0) {
printf("read returned errno %d\n", -found);
+ } else {
+ switch (outcome) {
+ case OUTCOME_TMPFS_MOUNT:
+ printf("OK\n");
+ default_tmpdir = "/dev/shm";
+ break;
-out:
- close(fd);
-
- return;
-
-found:
- found = next(fd, buf, ARRAY_SIZE(buf), ' ');
- if (found != 1)
- goto err;
+ case OUTCOME_NON_TMPFS_MOUNT:
+ printf("not tmpfs\n");
+ break;
- if (strncmp(buf, "tmpfs", strlen("tmpfs"))) {
- printf("not tmpfs\n");
- goto out;
+ default:
+ printf("nothing mounted on /dev/shm\n");
+ break;
+ }
}
- printf("OK\n");
- default_tmpdir = "/dev/shm";
- goto out;
+ close(fd);
+out1:
+ free(buf);
+out:
+ free(path);
}
static int __init make_tempfile(const char *template, char **out_tempname,
diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c
index 9d9f1b4bf82..905924b773d 100644
--- a/arch/um/os-Linux/signal.c
+++ b/arch/um/os-Linux/signal.c
@@ -25,7 +25,7 @@ void (*sig_info[NSIG])(int, struct siginfo *, struct uml_pt_regs *) = {
[SIGIO] = sigio_handler,
[SIGVTALRM] = timer_handler };
-static void sig_handler_common(int sig, siginfo_t *si, mcontext_t *mc)
+static void sig_handler_common(int sig, struct siginfo *si, mcontext_t *mc)
{
struct uml_pt_regs r;
int save_errno = errno;
@@ -61,7 +61,7 @@ static void sig_handler_common(int sig, siginfo_t *si, mcontext_t *mc)
static int signals_enabled;
static unsigned int signals_pending;
-void sig_handler(int sig, siginfo_t *si, mcontext_t *mc)
+void sig_handler(int sig, struct siginfo *si, mcontext_t *mc)
{
int enabled;
@@ -120,7 +120,7 @@ void set_sigstack(void *sig_stack, int size)
panic("enabling signal stack failed, errno = %d\n", errno);
}
-static void (*handlers[_NSIG])(int sig, siginfo_t *si, mcontext_t *mc) = {
+static void (*handlers[_NSIG])(int sig, struct siginfo *si, mcontext_t *mc) = {
[SIGSEGV] = sig_handler,
[SIGBUS] = sig_handler,
[SIGILL] = sig_handler,
@@ -162,7 +162,7 @@ static void hard_handler(int sig, siginfo_t *si, void *p)
while ((sig = ffs(pending)) != 0){
sig--;
pending &= ~(1 << sig);
- (*handlers[sig])(sig, si, mc);
+ (*handlers[sig])(sig, (struct siginfo *)si, mc);
}
/*
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index 4625949bf1e..d531879a461 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -54,7 +54,7 @@ static int ptrace_dump_regs(int pid)
void wait_stub_done(int pid)
{
- int n, status, err;
+ int n, status, err, bad_stop = 0;
while (1) {
CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED | __WALL));
@@ -74,6 +74,8 @@ void wait_stub_done(int pid)
if (((1 << WSTOPSIG(status)) & STUB_DONE_MASK) != 0)
return;
+ else
+ bad_stop = 1;
bad_wait:
err = ptrace_dump_regs(pid);
@@ -83,7 +85,10 @@ bad_wait:
printk(UM_KERN_ERR "wait_stub_done : failed to wait for SIGTRAP, "
"pid = %d, n = %d, errno = %d, status = 0x%x\n", pid, n, errno,
status);
- fatal_sigsegv();
+ if (bad_stop)
+ kill(pid, SIGKILL);
+ else
+ fatal_sigsegv();
}
extern unsigned long current_stub_stack(void);
@@ -409,7 +414,7 @@ void userspace(struct uml_pt_regs *regs)
if (WIFSTOPPED(status)) {
int sig = WSTOPSIG(status);
- ptrace(PTRACE_GETSIGINFO, pid, 0, &si);
+ ptrace(PTRACE_GETSIGINFO, pid, 0, (struct siginfo *)&si);
switch (sig) {
case SIGSEGV:
@@ -417,7 +422,7 @@ void userspace(struct uml_pt_regs *regs)
!ptrace_faultinfo) {
get_skas_faultinfo(pid,
&regs->faultinfo);
- (*sig_info[SIGSEGV])(SIGSEGV, &si,
+ (*sig_info[SIGSEGV])(SIGSEGV, (struct siginfo *)&si,
regs);
}
else handle_segv(pid, regs);
@@ -426,14 +431,14 @@ void userspace(struct uml_pt_regs *regs)
handle_trap(pid, regs, local_using_sysemu);
break;
case SIGTRAP:
- relay_signal(SIGTRAP, &si, regs);
+ relay_signal(SIGTRAP, (struct siginfo *)&si, regs);
break;
case SIGVTALRM:
now = os_nsecs();
if (now < nsecs)
break;
block_signals();
- (*sig_info[sig])(sig, &si, regs);
+ (*sig_info[sig])(sig, (struct siginfo *)&si, regs);
unblock_signals();
nsecs = timer.it_value.tv_sec *
UM_NSEC_PER_SEC +
@@ -447,7 +452,7 @@ void userspace(struct uml_pt_regs *regs)
case SIGFPE:
case SIGWINCH:
block_signals();
- (*sig_info[sig])(sig, &si, regs);
+ (*sig_info[sig])(sig, (struct siginfo *)&si, regs);
unblock_signals();
break;
default:
diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
index 7d6ba9db1be..6c63c358a7e 100644
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -27,7 +27,6 @@ obj-$(CONFIG_CRYPTO_SHA1_SSSE3) += sha1-ssse3.o
obj-$(CONFIG_CRYPTO_CRC32_PCLMUL) += crc32-pclmul.o
obj-$(CONFIG_CRYPTO_SHA256_SSSE3) += sha256-ssse3.o
obj-$(CONFIG_CRYPTO_SHA512_SSSE3) += sha512-ssse3.o
-obj-$(CONFIG_CRYPTO_CRCT10DIF_PCLMUL) += crct10dif-pclmul.o
# These modules require assembler to support AVX.
ifeq ($(avx_supported),yes)
@@ -82,4 +81,3 @@ crc32c-intel-$(CONFIG_64BIT) += crc32c-pcl-intel-asm_64.o
crc32-pclmul-y := crc32-pclmul_asm.o crc32-pclmul_glue.o
sha256-ssse3-y := sha256-ssse3-asm.o sha256-avx-asm.o sha256-avx2-asm.o sha256_ssse3_glue.o
sha512-ssse3-y := sha512-ssse3-asm.o sha512-avx-asm.o sha512-avx2-asm.o sha512_ssse3_glue.o
-crct10dif-pclmul-y := crct10dif-pcl-asm_64.o crct10dif-pclmul_glue.o
diff --git a/arch/x86/crypto/crct10dif-pcl-asm_64.S b/arch/x86/crypto/crct10dif-pcl-asm_64.S
deleted file mode 100644
index 35e97569d05..00000000000
--- a/arch/x86/crypto/crct10dif-pcl-asm_64.S
+++ /dev/null
@@ -1,643 +0,0 @@
-########################################################################
-# Implement fast CRC-T10DIF computation with SSE and PCLMULQDQ instructions
-#
-# Copyright (c) 2013, Intel Corporation
-#
-# Authors:
-# Erdinc Ozturk <erdinc.ozturk@intel.com>
-# Vinodh Gopal <vinodh.gopal@intel.com>
-# James Guilford <james.guilford@intel.com>
-# Tim Chen <tim.c.chen@linux.intel.com>
-#
-# This software is available to you under a choice of one of two
-# licenses. You may choose to be licensed under the terms of the GNU
-# General Public License (GPL) Version 2, available from the file
-# COPYING in the main directory of this source tree, or the
-# OpenIB.org BSD license below:
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the
-# distribution.
-#
-# * Neither the name of the Intel Corporation nor the names of its
-# contributors may be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-#
-# THIS SOFTWARE IS PROVIDED BY INTEL CORPORATION ""AS IS"" AND ANY
-# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL CORPORATION OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-########################################################################
-# Function API:
-# UINT16 crc_t10dif_pcl(
-# UINT16 init_crc, //initial CRC value, 16 bits
-# const unsigned char *buf, //buffer pointer to calculate CRC on
-# UINT64 len //buffer length in bytes (64-bit data)
-# );
-#
-# Reference paper titled "Fast CRC Computation for Generic
-# Polynomials Using PCLMULQDQ Instruction"
-# URL: http://www.intel.com/content/dam/www/public/us/en/documents
-# /white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf
-#
-#
-
-#include <linux/linkage.h>
-
-.text
-
-#define arg1 %rdi
-#define arg2 %rsi
-#define arg3 %rdx
-
-#define arg1_low32 %edi
-
-ENTRY(crc_t10dif_pcl)
-.align 16
-
- # adjust the 16-bit initial_crc value, scale it to 32 bits
- shl $16, arg1_low32
-
- # Allocate Stack Space
- mov %rsp, %rcx
- sub $16*2, %rsp
- # align stack to 16 byte boundary
- and $~(0x10 - 1), %rsp
-
- # check if smaller than 256
- cmp $256, arg3
-
- # for sizes less than 128, we can't fold 64B at a time...
- jl _less_than_128
-
-
- # load the initial crc value
- movd arg1_low32, %xmm10 # initial crc
-
- # crc value does not need to be byte-reflected, but it needs
- # to be moved to the high part of the register.
- # because data will be byte-reflected and will align with
- # initial crc at correct place.
- pslldq $12, %xmm10
-
- movdqa SHUF_MASK(%rip), %xmm11
- # receive the initial 64B data, xor the initial crc value
- movdqu 16*0(arg2), %xmm0
- movdqu 16*1(arg2), %xmm1
- movdqu 16*2(arg2), %xmm2
- movdqu 16*3(arg2), %xmm3
- movdqu 16*4(arg2), %xmm4
- movdqu 16*5(arg2), %xmm5
- movdqu 16*6(arg2), %xmm6
- movdqu 16*7(arg2), %xmm7
-
- pshufb %xmm11, %xmm0
- # XOR the initial_crc value
- pxor %xmm10, %xmm0
- pshufb %xmm11, %xmm1
- pshufb %xmm11, %xmm2
- pshufb %xmm11, %xmm3
- pshufb %xmm11, %xmm4
- pshufb %xmm11, %xmm5
- pshufb %xmm11, %xmm6
- pshufb %xmm11, %xmm7
-
- movdqa rk3(%rip), %xmm10 #xmm10 has rk3 and rk4
- #imm value of pclmulqdq instruction
- #will determine which constant to use
-
- #################################################################
- # we subtract 256 instead of 128 to save one instruction from the loop
- sub $256, arg3
-
- # at this section of the code, there is 64*x+y (0<=y<64) bytes of
- # buffer. The _fold_64_B_loop will fold 64B at a time
- # until we have 64+y Bytes of buffer
-
-
- # fold 64B at a time. This section of the code folds 4 xmm
- # registers in parallel
-_fold_64_B_loop:
-
- # update the buffer pointer
- add $128, arg2 # buf += 64#
-
- movdqu 16*0(arg2), %xmm9
- movdqu 16*1(arg2), %xmm12
- pshufb %xmm11, %xmm9
- pshufb %xmm11, %xmm12
- movdqa %xmm0, %xmm8
- movdqa %xmm1, %xmm13
- pclmulqdq $0x0 , %xmm10, %xmm0
- pclmulqdq $0x11, %xmm10, %xmm8
- pclmulqdq $0x0 , %xmm10, %xmm1
- pclmulqdq $0x11, %xmm10, %xmm13
- pxor %xmm9 , %xmm0
- xorps %xmm8 , %xmm0
- pxor %xmm12, %xmm1
- xorps %xmm13, %xmm1
-
- movdqu 16*2(arg2), %xmm9
- movdqu 16*3(arg2), %xmm12
- pshufb %xmm11, %xmm9
- pshufb %xmm11, %xmm12
- movdqa %xmm2, %xmm8
- movdqa %xmm3, %xmm13
- pclmulqdq $0x0, %xmm10, %xmm2
- pclmulqdq $0x11, %xmm10, %xmm8
- pclmulqdq $0x0, %xmm10, %xmm3
- pclmulqdq $0x11, %xmm10, %xmm13
- pxor %xmm9 , %xmm2
- xorps %xmm8 , %xmm2
- pxor %xmm12, %xmm3
- xorps %xmm13, %xmm3
-
- movdqu 16*4(arg2), %xmm9
- movdqu 16*5(arg2), %xmm12
- pshufb %xmm11, %xmm9
- pshufb %xmm11, %xmm12
- movdqa %xmm4, %xmm8
- movdqa %xmm5, %xmm13
- pclmulqdq $0x0, %xmm10, %xmm4
- pclmulqdq $0x11, %xmm10, %xmm8
- pclmulqdq $0x0, %xmm10, %xmm5
- pclmulqdq $0x11, %xmm10, %xmm13
- pxor %xmm9 , %xmm4
- xorps %xmm8 , %xmm4
- pxor %xmm12, %xmm5
- xorps %xmm13, %xmm5
-
- movdqu 16*6(arg2), %xmm9
- movdqu 16*7(arg2), %xmm12
- pshufb %xmm11, %xmm9
- pshufb %xmm11, %xmm12
- movdqa %xmm6 , %xmm8
- movdqa %xmm7 , %xmm13
- pclmulqdq $0x0 , %xmm10, %xmm6
- pclmulqdq $0x11, %xmm10, %xmm8
- pclmulqdq $0x0 , %xmm10, %xmm7
- pclmulqdq $0x11, %xmm10, %xmm13
- pxor %xmm9 , %xmm6
- xorps %xmm8 , %xmm6
- pxor %xmm12, %xmm7
- xorps %xmm13, %xmm7
-
- sub $128, arg3
-
- # check if there is another 64B in the buffer to be able to fold
- jge _fold_64_B_loop
- ##################################################################
-
-
- add $128, arg2
- # at this point, the buffer pointer is pointing at the last y Bytes
- # of the buffer the 64B of folded data is in 4 of the xmm
- # registers: xmm0, xmm1, xmm2, xmm3
-
-
- # fold the 8 xmm registers to 1 xmm register with different constants
-
- movdqa rk9(%rip), %xmm10
- movdqa %xmm0, %xmm8
- pclmulqdq $0x11, %xmm10, %xmm0
- pclmulqdq $0x0 , %xmm10, %xmm8
- pxor %xmm8, %xmm7
- xorps %xmm0, %xmm7
-
- movdqa rk11(%rip), %xmm10
- movdqa %xmm1, %xmm8
- pclmulqdq $0x11, %xmm10, %xmm1
- pclmulqdq $0x0 , %xmm10, %xmm8
- pxor %xmm8, %xmm7
- xorps %xmm1, %xmm7
-
- movdqa rk13(%rip), %xmm10
- movdqa %xmm2, %xmm8
- pclmulqdq $0x11, %xmm10, %xmm2
- pclmulqdq $0x0 , %xmm10, %xmm8
- pxor %xmm8, %xmm7
- pxor %xmm2, %xmm7
-
- movdqa rk15(%rip), %xmm10
- movdqa %xmm3, %xmm8
- pclmulqdq $0x11, %xmm10, %xmm3
- pclmulqdq $0x0 , %xmm10, %xmm8
- pxor %xmm8, %xmm7
- xorps %xmm3, %xmm7
-
- movdqa rk17(%rip), %xmm10
- movdqa %xmm4, %xmm8
- pclmulqdq $0x11, %xmm10, %xmm4
- pclmulqdq $0x0 , %xmm10, %xmm8
- pxor %xmm8, %xmm7
- pxor %xmm4, %xmm7
-
- movdqa rk19(%rip), %xmm10
- movdqa %xmm5, %xmm8
- pclmulqdq $0x11, %xmm10, %xmm5
- pclmulqdq $0x0 , %xmm10, %xmm8
- pxor %xmm8, %xmm7
- xorps %xmm5, %xmm7
-
- movdqa rk1(%rip), %xmm10 #xmm10 has rk1 and rk2
- #imm value of pclmulqdq instruction
- #will determine which constant to use
- movdqa %xmm6, %xmm8
- pclmulqdq $0x11, %xmm10, %xmm6
- pclmulqdq $0x0 , %xmm10, %xmm8
- pxor %xmm8, %xmm7
- pxor %xmm6, %xmm7
-
-
- # instead of 64, we add 48 to the loop counter to save 1 instruction
- # from the loop instead of a cmp instruction, we use the negative
- # flag with the jl instruction
- add $128-16, arg3
- jl _final_reduction_for_128
-
- # now we have 16+y bytes left to reduce. 16 Bytes is in register xmm7
- # and the rest is in memory. We can fold 16 bytes at a time if y>=16
- # continue folding 16B at a time
-
-_16B_reduction_loop:
- movdqa %xmm7, %xmm8
- pclmulqdq $0x11, %xmm10, %xmm7
- pclmulqdq $0x0 , %xmm10, %xmm8
- pxor %xmm8, %xmm7
- movdqu (arg2), %xmm0
- pshufb %xmm11, %xmm0
- pxor %xmm0 , %xmm7
- add $16, arg2
- sub $16, arg3
- # instead of a cmp instruction, we utilize the flags with the
- # jge instruction equivalent of: cmp arg3, 16-16
- # check if there is any more 16B in the buffer to be able to fold
- jge _16B_reduction_loop
-
- #now we have 16+z bytes left to reduce, where 0<= z < 16.
- #first, we reduce the data in the xmm7 register
-
-
-_final_reduction_for_128:
- # check if any more data to fold. If not, compute the CRC of
- # the final 128 bits
- add $16, arg3
- je _128_done
-
- # here we are getting data that is less than 16 bytes.
- # since we know that there was data before the pointer, we can
- # offset the input pointer before the actual point, to receive
- # exactly 16 bytes. after that the registers need to be adjusted.
-_get_last_two_xmms:
- movdqa %xmm7, %xmm2
-
- movdqu -16(arg2, arg3), %xmm1
- pshufb %xmm11, %xmm1
-
- # get rid of the extra data that was loaded before
- # load the shift constant
- lea pshufb_shf_table+16(%rip), %rax
- sub arg3, %rax
- movdqu (%rax), %xmm0
-
- # shift xmm2 to the left by arg3 bytes
- pshufb %xmm0, %xmm2
-
- # shift xmm7 to the right by 16-arg3 bytes
- pxor mask1(%rip), %xmm0
- pshufb %xmm0, %xmm7
- pblendvb %xmm2, %xmm1 #xmm0 is implicit
-
- # fold 16 Bytes
- movdqa %xmm1, %xmm2
- movdqa %xmm7, %xmm8
- pclmulqdq $0x11, %xmm10, %xmm7
- pclmulqdq $0x0 , %xmm10, %xmm8
- pxor %xmm8, %xmm7
- pxor %xmm2, %xmm7
-
-_128_done:
- # compute crc of a 128-bit value
- movdqa rk5(%rip), %xmm10 # rk5 and rk6 in xmm10
- movdqa %xmm7, %xmm0
-
- #64b fold
- pclmulqdq $0x1, %xmm10, %xmm7
- pslldq $8 , %xmm0
- pxor %xmm0, %xmm7
-
- #32b fold
- movdqa %xmm7, %xmm0
-
- pand mask2(%rip), %xmm0
-
- psrldq $12, %xmm7
- pclmulqdq $0x10, %xmm10, %xmm7
- pxor %xmm0, %xmm7
-
- #barrett reduction
-_barrett:
- movdqa rk7(%rip), %xmm10 # rk7 and rk8 in xmm10
- movdqa %xmm7, %xmm0
- pclmulqdq $0x01, %xmm10, %xmm7
- pslldq $4, %xmm7
- pclmulqdq $0x11, %xmm10, %xmm7
-
- pslldq $4, %xmm7
- pxor %xmm0, %xmm7
- pextrd $1, %xmm7, %eax
-
-_cleanup:
- # scale the result back to 16 bits
- shr $16, %eax
- mov %rcx, %rsp
- ret
-
-########################################################################
-
-.align 16
-_less_than_128:
-
- # check if there is enough buffer to be able to fold 16B at a time
- cmp $32, arg3
- jl _less_than_32
- movdqa SHUF_MASK(%rip), %xmm11
-
- # now if there is, load the constants
- movdqa rk1(%rip), %xmm10 # rk1 and rk2 in xmm10
-
- movd arg1_low32, %xmm0 # get the initial crc value
- pslldq $12, %xmm0 # align it to its correct place
- movdqu (arg2), %xmm7 # load the plaintext
- pshufb %xmm11, %xmm7 # byte-reflect the plaintext
- pxor %xmm0, %xmm7
-
-
- # update the buffer pointer
- add $16, arg2
-
- # update the counter. subtract 32 instead of 16 to save one
- # instruction from the loop
- sub $32, arg3
-
- jmp _16B_reduction_loop
-
-
-.align 16
-_less_than_32:
- # mov initial crc to the return value. this is necessary for
- # zero-length buffers.
- mov arg1_low32, %eax
- test arg3, arg3
- je _cleanup
-
- movdqa SHUF_MASK(%rip), %xmm11
-
- movd arg1_low32, %xmm0 # get the initial crc value
- pslldq $12, %xmm0 # align it to its correct place
-
- cmp $16, arg3
- je _exact_16_left
- jl _less_than_16_left
-
- movdqu (arg2), %xmm7 # load the plaintext
- pshufb %xmm11, %xmm7 # byte-reflect the plaintext
- pxor %xmm0 , %xmm7 # xor the initial crc value
- add $16, arg2
- sub $16, arg3
- movdqa rk1(%rip), %xmm10 # rk1 and rk2 in xmm10
- jmp _get_last_two_xmms
-
-
-.align 16
-_less_than_16_left:
- # use stack space to load data less than 16 bytes, zero-out
- # the 16B in memory first.
-
- pxor %xmm1, %xmm1
- mov %rsp, %r11
- movdqa %xmm1, (%r11)
-
- cmp $4, arg3
- jl _only_less_than_4
-
- # backup the counter value
- mov arg3, %r9
- cmp $8, arg3
- jl _less_than_8_left
-
- # load 8 Bytes
- mov (arg2), %rax
- mov %rax, (%r11)
- add $8, %r11
- sub $8, arg3
- add $8, arg2
-_less_than_8_left:
-
- cmp $4, arg3
- jl _less_than_4_left
-
- # load 4 Bytes
- mov (arg2), %eax
- mov %eax, (%r11)
- add $4, %r11
- sub $4, arg3
- add $4, arg2
-_less_than_4_left:
-
- cmp $2, arg3
- jl _less_than_2_left
-
- # load 2 Bytes
- mov (arg2), %ax
- mov %ax, (%r11)
- add $2, %r11
- sub $2, arg3
- add $2, arg2
-_less_than_2_left:
- cmp $1, arg3
- jl _zero_left
-
- # load 1 Byte
- mov (arg2), %al
- mov %al, (%r11)
-_zero_left:
- movdqa (%rsp), %xmm7
- pshufb %xmm11, %xmm7
- pxor %xmm0 , %xmm7 # xor the initial crc value
-
- # shl r9, 4
- lea pshufb_shf_table+16(%rip), %rax
- sub %r9, %rax
- movdqu (%rax), %xmm0
- pxor mask1(%rip), %xmm0
-
- pshufb %xmm0, %xmm7
- jmp _128_done
-
-.align 16
-_exact_16_left:
- movdqu (arg2), %xmm7
- pshufb %xmm11, %xmm7
- pxor %xmm0 , %xmm7 # xor the initial crc value
-
- jmp _128_done
-
-_only_less_than_4:
- cmp $3, arg3
- jl _only_less_than_3
-
- # load 3 Bytes
- mov (arg2), %al
- mov %al, (%r11)
-
- mov 1(arg2), %al
- mov %al, 1(%r11)
-
- mov 2(arg2), %al
- mov %al, 2(%r11)
-
- movdqa (%rsp), %xmm7
- pshufb %xmm11, %xmm7
- pxor %xmm0 , %xmm7 # xor the initial crc value
-
- psrldq $5, %xmm7
-
- jmp _barrett
-_only_less_than_3:
- cmp $2, arg3
- jl _only_less_than_2
-
- # load 2 Bytes
- mov (arg2), %al
- mov %al, (%r11)
-
- mov 1(arg2), %al
- mov %al, 1(%r11)
-
- movdqa (%rsp), %xmm7
- pshufb %xmm11, %xmm7
- pxor %xmm0 , %xmm7 # xor the initial crc value
-
- psrldq $6, %xmm7
-
- jmp _barrett
-_only_less_than_2:
-
- # load 1 Byte
- mov (arg2), %al
- mov %al, (%r11)
-
- movdqa (%rsp), %xmm7
- pshufb %xmm11, %xmm7
- pxor %xmm0 , %xmm7 # xor the initial crc value
-
- psrldq $7, %xmm7
-
- jmp _barrett
-
-ENDPROC(crc_t10dif_pcl)
-
-.data
-
-# precomputed constants
-# these constants are precomputed from the poly:
-# 0x8bb70000 (0x8bb7 scaled to 32 bits)
-.align 16
-# Q = 0x18BB70000
-# rk1 = 2^(32*3) mod Q << 32
-# rk2 = 2^(32*5) mod Q << 32
-# rk3 = 2^(32*15) mod Q << 32
-# rk4 = 2^(32*17) mod Q << 32
-# rk5 = 2^(32*3) mod Q << 32
-# rk6 = 2^(32*2) mod Q << 32
-# rk7 = floor(2^64/Q)
-# rk8 = Q
-rk1:
-.quad 0x2d56000000000000
-rk2:
-.quad 0x06df000000000000
-rk3:
-.quad 0x9d9d000000000000
-rk4:
-.quad 0x7cf5000000000000
-rk5:
-.quad 0x2d56000000000000
-rk6:
-.quad 0x1368000000000000
-rk7:
-.quad 0x00000001f65a57f8
-rk8:
-.quad 0x000000018bb70000
-
-rk9:
-.quad 0xceae000000000000
-rk10:
-.quad 0xbfd6000000000000
-rk11:
-.quad 0x1e16000000000000
-rk12:
-.quad 0x713c000000000000
-rk13:
-.quad 0xf7f9000000000000
-rk14:
-.quad 0x80a6000000000000
-rk15:
-.quad 0x044c000000000000
-rk16:
-.quad 0xe658000000000000
-rk17:
-.quad 0xad18000000000000
-rk18:
-.quad 0xa497000000000000
-rk19:
-.quad 0x6ee3000000000000
-rk20:
-.quad 0xe7b5000000000000
-
-
-
-mask1:
-.octa 0x80808080808080808080808080808080
-mask2:
-.octa 0x00000000FFFFFFFFFFFFFFFFFFFFFFFF
-
-SHUF_MASK:
-.octa 0x000102030405060708090A0B0C0D0E0F
-
-pshufb_shf_table:
-# use these values for shift constants for the pshufb instruction
-# different alignments result in values as shown:
-# DDQ 0x008f8e8d8c8b8a898887868584838281 # shl 15 (16-1) / shr1
-# DDQ 0x01008f8e8d8c8b8a8988878685848382 # shl 14 (16-3) / shr2
-# DDQ 0x0201008f8e8d8c8b8a89888786858483 # shl 13 (16-4) / shr3
-# DDQ 0x030201008f8e8d8c8b8a898887868584 # shl 12 (16-4) / shr4
-# DDQ 0x04030201008f8e8d8c8b8a8988878685 # shl 11 (16-5) / shr5
-# DDQ 0x0504030201008f8e8d8c8b8a89888786 # shl 10 (16-6) / shr6
-# DDQ 0x060504030201008f8e8d8c8b8a898887 # shl 9 (16-7) / shr7
-# DDQ 0x07060504030201008f8e8d8c8b8a8988 # shl 8 (16-8) / shr8
-# DDQ 0x0807060504030201008f8e8d8c8b8a89 # shl 7 (16-9) / shr9
-# DDQ 0x090807060504030201008f8e8d8c8b8a # shl 6 (16-10) / shr10
-# DDQ 0x0a090807060504030201008f8e8d8c8b # shl 5 (16-11) / shr11
-# DDQ 0x0b0a090807060504030201008f8e8d8c # shl 4 (16-12) / shr12
-# DDQ 0x0c0b0a090807060504030201008f8e8d # shl 3 (16-13) / shr13
-# DDQ 0x0d0c0b0a090807060504030201008f8e # shl 2 (16-14) / shr14
-# DDQ 0x0e0d0c0b0a090807060504030201008f # shl 1 (16-15) / shr15
-.octa 0x8f8e8d8c8b8a89888786858483828100
-.octa 0x000e0d0c0b0a09080706050403020100
diff --git a/arch/x86/crypto/crct10dif-pclmul_glue.c b/arch/x86/crypto/crct10dif-pclmul_glue.c
deleted file mode 100644
index 7845d7fd54c..00000000000
--- a/arch/x86/crypto/crct10dif-pclmul_glue.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Cryptographic API.
- *
- * T10 Data Integrity Field CRC16 Crypto Transform using PCLMULQDQ Instructions
- *
- * Copyright (C) 2013 Intel Corporation
- * Author: Tim Chen <tim.c.chen@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- *
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/crc-t10dif.h>
-#include <crypto/internal/hash.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <asm/i387.h>
-#include <asm/cpufeature.h>
-#include <asm/cpu_device_id.h>
-
-asmlinkage __u16 crc_t10dif_pcl(__u16 crc, const unsigned char *buf,
- size_t len);
-
-struct chksum_desc_ctx {
- __u16 crc;
-};
-
-/*
- * Steps through buffer one byte at at time, calculates reflected
- * crc using table.
- */
-
-static int chksum_init(struct shash_desc *desc)
-{
- struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
-
- ctx->crc = 0;
-
- return 0;
-}
-
-static int chksum_update(struct shash_desc *desc, const u8 *data,
- unsigned int length)
-{
- struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
-
- if (irq_fpu_usable()) {
- kernel_fpu_begin();
- ctx->crc = crc_t10dif_pcl(ctx->crc, data, length);
- kernel_fpu_end();
- } else
- ctx->crc = crc_t10dif_generic(ctx->crc, data, length);
- return 0;
-}
-
-static int chksum_final(struct shash_desc *desc, u8 *out)
-{
- struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
-
- *(__u16 *)out = ctx->crc;
- return 0;
-}
-
-static int __chksum_finup(__u16 *crcp, const u8 *data, unsigned int len,
- u8 *out)
-{
- if (irq_fpu_usable()) {
- kernel_fpu_begin();
- *(__u16 *)out = crc_t10dif_pcl(*crcp, data, len);
- kernel_fpu_end();
- } else
- *(__u16 *)out = crc_t10dif_generic(*crcp, data, len);
- return 0;
-}
-
-static int chksum_finup(struct shash_desc *desc, const u8 *data,
- unsigned int len, u8 *out)
-{
- struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
-
- return __chksum_finup(&ctx->crc, data, len, out);
-}
-
-static int chksum_digest(struct shash_desc *desc, const u8 *data,
- unsigned int length, u8 *out)
-{
- struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
-
- return __chksum_finup(&ctx->crc, data, length, out);
-}
-
-static struct shash_alg alg = {
- .digestsize = CRC_T10DIF_DIGEST_SIZE,
- .init = chksum_init,
- .update = chksum_update,
- .final = chksum_final,
- .finup = chksum_finup,
- .digest = chksum_digest,
- .descsize = sizeof(struct chksum_desc_ctx),
- .base = {
- .cra_name = "crct10dif",
- .cra_driver_name = "crct10dif-pclmul",
- .cra_priority = 200,
- .cra_blocksize = CRC_T10DIF_BLOCK_SIZE,
- .cra_module = THIS_MODULE,
- }
-};
-
-static const struct x86_cpu_id crct10dif_cpu_id[] = {
- X86_FEATURE_MATCH(X86_FEATURE_PCLMULQDQ),
- {}
-};
-MODULE_DEVICE_TABLE(x86cpu, crct10dif_cpu_id);
-
-static int __init crct10dif_intel_mod_init(void)
-{
- if (!x86_match_cpu(crct10dif_cpu_id))
- return -ENODEV;
-
- return crypto_register_shash(&alg);
-}
-
-static void __exit crct10dif_intel_mod_fini(void)
-{
- crypto_unregister_shash(&alg);
-}
-
-module_init(crct10dif_intel_mod_init);
-module_exit(crct10dif_intel_mod_fini);
-
-MODULE_AUTHOR("Tim Chen <tim.c.chen@linux.intel.com>");
-MODULE_DESCRIPTION("T10 DIF CRC calculation accelerated with PCLMULQDQ.");
-MODULE_LICENSE("GPL");
-
-MODULE_ALIAS("crct10dif");
-MODULE_ALIAS("crct10dif-pclmul");
diff --git a/arch/x86/kernel/cpu/mcheck/mce-severity.c b/arch/x86/kernel/cpu/mcheck/mce-severity.c
index e2703520d12..c370e1c4468 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-severity.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-severity.c
@@ -111,8 +111,8 @@ static struct severity {
#ifdef CONFIG_MEMORY_FAILURE
MCESEV(
KEEP, "Action required but unaffected thread is continuable",
- SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR),
- MCGMASK(MCG_STATUS_RIPV, MCG_STATUS_RIPV)
+ SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR, MCI_UC_SAR|MCI_ADDR),
+ MCGMASK(MCG_STATUS_RIPV|MCG_STATUS_EIPV, MCG_STATUS_RIPV)
),
MCESEV(
AR, "Action required: data load error in a user process",
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 0d094da4954..9e9285ae9b9 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2811,6 +2811,13 @@ exit:
static bool page_fault_can_be_fast(struct kvm_vcpu *vcpu, u32 error_code)
{
/*
+ * Do not fix the mmio spte with invalid generation number which
+ * need to be updated by slow page fault path.
+ */
+ if (unlikely(error_code & PFERR_RSVD_MASK))
+ return false;
+
+ /*
* #PF can be fast only if the shadow page table is present and it
* is caused by write-protect, that means we just need change the
* W bit of the spte which can be done out of mmu-lock.
diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c
index 643b8b5eee8..8244f5ec2f4 100644
--- a/arch/x86/platform/ce4100/ce4100.c
+++ b/arch/x86/platform/ce4100/ce4100.c
@@ -12,6 +12,7 @@
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/module.h>
+#include <linux/reboot.h>
#include <linux/serial_reg.h>
#include <linux/serial_8250.h>
#include <linux/reboot.h>
diff --git a/arch/x86/um/signal.c b/arch/x86/um/signal.c
index ae7319db18e..5e04a1c899f 100644
--- a/arch/x86/um/signal.c
+++ b/arch/x86/um/signal.c
@@ -508,7 +508,6 @@ int setup_signal_stack_si(unsigned long stack_top, int sig,
{
struct rt_sigframe __user *frame;
int err = 0;
- struct task_struct *me = current;
frame = (struct rt_sigframe __user *)
round_down(stack_top - sizeof(struct rt_sigframe), 16);