diff options
Diffstat (limited to 'arch')
526 files changed, 7341 insertions, 2755 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c208fd97c18..2686959319a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -29,6 +29,7 @@ config ARM select HAVE_GENERIC_HARDIRQS select HAVE_SPARSE_IRQ select GENERIC_IRQ_SHOW + select CPU_PM if (SUSPEND || CPU_IDLE) help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -195,7 +196,8 @@ config VECTORS_BASE The base address of exception vectors. config ARM_PATCH_PHYS_VIRT - bool "Patch physical to virtual translations at runtime" + bool "Patch physical to virtual translations at runtime" if EMBEDDED + default y depends on !XIP_KERNEL && MMU depends on !ARCH_REALVIEW || !SPARSEMEM help @@ -204,16 +206,25 @@ config ARM_PATCH_PHYS_VIRT kernel in system memory. This can only be used with non-XIP MMU kernels where the base - of physical memory is at a 16MB boundary, or theoretically 64K - for the MSM machine class. + of physical memory is at a 16MB boundary. -config ARM_PATCH_PHYS_VIRT_16BIT - def_bool y - depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM + Only disable this option if you know that you do not require + this feature (eg, building a kernel for a single machine) and + you need to shrink the kernel to the minimal size. + +config NEED_MACH_MEMORY_H + bool help - This option extends the physical to virtual translation patching - to allow physical memory down to a theoretical minimum of 64K - boundaries. + Select this when mach/memory.h is required to provide special + definitions for this platform. The need for mach/memory.h should + be avoided when possible. + +config PHYS_OFFSET + hex "Physical address of main memory" + depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H + help + Please provide the physical address corresponding to the + location of main memory in your system. source "init/Kconfig" @@ -246,6 +257,7 @@ config ARCH_INTEGRATOR select GENERIC_CLOCKEVENTS select PLAT_VERSATILE select PLAT_VERSATILE_FPGA_IRQ + select NEED_MACH_MEMORY_H help Support for ARM's Integrator platform. @@ -261,6 +273,7 @@ config ARCH_REALVIEW select PLAT_VERSATILE_CLCD select ARM_TIMER_SP804 select GPIO_PL061 if GPIOLIB + select NEED_MACH_MEMORY_H help This enables support for ARM Ltd RealView boards. @@ -301,7 +314,6 @@ config ARCH_AT91 select ARCH_REQUIRE_GPIOLIB select HAVE_CLK select CLKDEV_LOOKUP - select ARM_PATCH_PHYS_VIRT if MMU help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 and AT91CAP9 processors. @@ -322,6 +334,7 @@ config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x-based" select CPU_ARM720T select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help Support for Cirrus Logic 711x/721x based boards. @@ -362,6 +375,7 @@ config ARCH_EBSA110 select ISA select NO_IOPORT select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help This is an evaluation board for the StrongARM processor available from Digital. It has limited hardware on-board, including an @@ -377,6 +391,7 @@ config ARCH_EP93XX select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_USES_GETTIMEOFFSET + select NEED_MEMORY_H help This enables support for the Cirrus EP93xx series of CPUs. @@ -385,6 +400,7 @@ config ARCH_FOOTBRIDGE select CPU_SA110 select FOOTBRIDGE select GENERIC_CLOCKEVENTS + select NEED_MACH_MEMORY_H help Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. @@ -434,6 +450,7 @@ config ARCH_IOP13XX select PCI select ARCH_SUPPORTS_MSI select VMSPLIT_1G + select NEED_MACH_MEMORY_H help Support for Intel's IOP13XX (XScale) family of processors. @@ -464,6 +481,7 @@ config ARCH_IXP23XX select CPU_XSC3 select PCI select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help Support for Intel's IXP23xx (XScale) family of processors. @@ -473,6 +491,7 @@ config ARCH_IXP2000 select CPU_XSCALE select PCI select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help Support for Intel's IXP2400/2800 (XScale) family of processors. @@ -566,6 +585,7 @@ config ARCH_KS8695 select CPU_ARM922T select ARCH_REQUIRE_GPIOLIB select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based System-on-Chip devices. @@ -657,6 +677,7 @@ config ARCH_SHMOBILE select SPARSE_IRQ select MULTI_IRQ_HANDLER select PM_GENERIC_DOMAINS if PM + select NEED_MACH_MEMORY_H help Support for Renesas's SH-Mobile and R-Mobile ARM platforms. @@ -671,6 +692,7 @@ config ARCH_RPC select NO_IOPORT select ARCH_SPARSEMEM_ENABLE select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -689,6 +711,7 @@ config ARCH_SA1100 select HAVE_SCHED_CLOCK select TICK_ONESHOT select ARCH_REQUIRE_GPIOLIB + select NEED_MACH_MEMORY_H help Support for StrongARM 11x0 based boards. @@ -781,6 +804,7 @@ config ARCH_S5PV210 select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_WATCHDOG if WATCHDOG + select NEED_MACH_MEMORY_H help Samsung S5PV210/S5PC110 series based systems @@ -797,6 +821,7 @@ config ARCH_EXYNOS4 select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG + select NEED_MACH_MEMORY_H help Samsung EXYNOS4 series based systems @@ -808,6 +833,7 @@ config ARCH_SHARK select ZONE_DMA select PCI select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help Support for the StrongARM based Digital DNARD machine, also known as "Shark" (<http://www.shark-linux.de/shark.html>). @@ -835,6 +861,7 @@ config ARCH_U300 select CLKDEV_LOOKUP select HAVE_MACH_CLKDEV select GENERIC_GPIO + select NEED_MACH_MEMORY_H help Support for ST-Ericsson U300 series mobile platforms. @@ -1818,6 +1845,38 @@ config ZBOOT_ROM_SH_MOBILE_SDHI endchoice +config ARM_APPENDED_DTB + bool "Use appended device tree blob to zImage (EXPERIMENTAL)" + depends on OF && !ZBOOT_ROM && EXPERIMENTAL + help + With this option, the boot code will look for a device tree binary + (DTB) appended to zImage + (e.g. cat zImage <filename>.dtb > zImage_w_dtb). + + This is meant as a backward compatibility convenience for those + systems with a bootloader that can't be upgraded to accommodate + the documented boot protocol using a device tree. + + Beware that there is very little in terms of protection against + this option being confused by leftover garbage in memory that might + look like a DTB header after a reboot if no actual DTB is appended + to zImage. Do not leave this option active in a production kernel + if you don't intend to always append a DTB. Proper passing of the + location into r2 of a bootloader provided DTB is always preferable + to this option. + +config ARM_ATAG_DTB_COMPAT + bool "Supplement the appended DTB with traditional ATAG information" + depends on ARM_APPENDED_DTB + help + Some old bootloaders can't be updated to a DTB capable one, yet + they provide ATAGs with memory configuration, the ramdisk address, + the kernel cmdline string, etc. Such information is dynamically + provided by the bootloader and can't always be stored in a static + DTB. To allow a device tree enabled kernel to be used with such + bootloaders, this option allows zImage to extract the information + from the ATAG list and store it at run time into the appended DTB. + config CMDLINE string "Default kernel command string" default "" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 81cbe40c159..be3a0f78d91 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -129,4 +129,10 @@ config DEBUG_S3C_UART The uncompressor code port configuration is now handled by CONFIG_S3C_LOWLEVEL_UART_PORT. +config ARM_KPROBES_TEST + tristate "Kprobes test module" + depends on KPROBES && MODULES + help + Perform tests of kprobes API and instruction set simulation. + endmenu diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 70c424eaf7b..5665c2a3b65 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -128,6 +128,9 @@ textofs-$(CONFIG_PM_H1940) := 0x00108000 ifeq ($(CONFIG_ARCH_SA1100),y) textofs-$(CONFIG_SA1111) := 0x00208000 endif +textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000 +textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 +textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore index c6028967d33..e0936a14851 100644 --- a/arch/arm/boot/compressed/.gitignore +++ b/arch/arm/boot/compressed/.gitignore @@ -5,3 +5,12 @@ piggy.lzo piggy.lzma vmlinux vmlinux.lds + +# borrowed libfdt files +fdt.c +fdt.h +fdt_ro.c +fdt_rw.c +fdt_wip.c +libfdt.h +libfdt_internal.h diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 0c74a6fab95..e4f32a8e002 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -26,6 +26,10 @@ HEAD = head.o OBJS += misc.o decompress.o FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c +# string library code (-Os is enforced to keep it much smaller) +OBJS += string.o +CFLAGS_string.o := -Os + # # Architecture dependencies # @@ -89,21 +93,41 @@ suffix_$(CONFIG_KERNEL_GZIP) = gzip suffix_$(CONFIG_KERNEL_LZO) = lzo suffix_$(CONFIG_KERNEL_LZMA) = lzma +# Borrowed libfdt files for the ATAG compatibility mode + +libfdt := fdt_rw.c fdt_ro.c fdt_wip.c fdt.c +libfdt_hdrs := fdt.h libfdt.h libfdt_internal.h + +libfdt_objs := $(addsuffix .o, $(basename $(libfdt))) + +$(addprefix $(obj)/,$(libfdt) $(libfdt_hdrs)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/% + $(call cmd,shipped) + +$(addprefix $(obj)/,$(libfdt_objs) atags_to_fdt.o): \ + $(addprefix $(obj)/,$(libfdt_hdrs)) + +ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y) +OBJS += $(libfdt_objs) atags_to_fdt.o +endif + targets := vmlinux vmlinux.lds \ piggy.$(suffix_y) piggy.$(suffix_y).o \ - font.o font.c head.o misc.o $(OBJS) + lib1funcs.o lib1funcs.S font.o font.c head.o misc.o $(OBJS) # Make sure files are removed during clean -extra-y += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S +extra-y += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S $(libfdt) $(libfdt_hdrs) ifeq ($(CONFIG_FUNCTION_TRACER),y) ORIG_CFLAGS := $(KBUILD_CFLAGS) KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) endif -ccflags-y := -fpic -fno-builtin +ccflags-y := -fpic -fno-builtin -I$(obj) asflags-y := -Wa,-march=all +# Supply kernel BSS size to the decompressor via a linker symbol. +KBSS_SZ = $(shell size $(obj)/../../../../vmlinux | awk 'END{print $$3}') +LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ) # Supply ZRELADDR to the decompressor via a linker symbol. ifneq ($(CONFIG_AUTO_ZRELADDR),y) LDFLAGS_vmlinux += --defsym zreladdr=$(ZRELADDR) @@ -123,7 +147,7 @@ LDFLAGS_vmlinux += -T # For __aeabi_uidivmod lib1funcs = $(obj)/lib1funcs.o -$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE +$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S $(call cmd,shipped) # We need to prevent any GOTOFF relocs being used with references diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c new file mode 100644 index 00000000000..6ce11c48117 --- /dev/null +++ b/arch/arm/boot/compressed/atags_to_fdt.c @@ -0,0 +1,97 @@ +#include <asm/setup.h> +#include <libfdt.h> + +static int node_offset(void *fdt, const char *node_path) +{ + int offset = fdt_path_offset(fdt, node_path); + if (offset == -FDT_ERR_NOTFOUND) + offset = fdt_add_subnode(fdt, 0, node_path); + return offset; +} + +static int setprop(void *fdt, const char *node_path, const char *property, + uint32_t *val_array, int size) +{ + int offset = node_offset(fdt, node_path); + if (offset < 0) + return offset; + return fdt_setprop(fdt, offset, property, val_array, size); +} + +static int setprop_string(void *fdt, const char *node_path, + const char *property, const char *string) +{ + int offset = node_offset(fdt, node_path); + if (offset < 0) + return offset; + return fdt_setprop_string(fdt, offset, property, string); +} + +static int setprop_cell(void *fdt, const char *node_path, + const char *property, uint32_t val) +{ + int offset = node_offset(fdt, node_path); + if (offset < 0) + return offset; + return fdt_setprop_cell(fdt, offset, property, val); +} + +/* + * Convert and fold provided ATAGs into the provided FDT. + * + * REturn values: + * = 0 -> pretend success + * = 1 -> bad ATAG (may retry with another possible ATAG pointer) + * < 0 -> error from libfdt + */ +int atags_to_fdt(void *atag_list, void *fdt, int total_space) +{ + struct tag *atag = atag_list; + uint32_t mem_reg_property[2 * NR_BANKS]; + int memcount = 0; + int ret; + + /* make sure we've got an aligned pointer */ + if ((u32)atag_list & 0x3) + return 1; + + /* if we get a DTB here we're done already */ + if (*(u32 *)atag_list == fdt32_to_cpu(FDT_MAGIC)) + return 0; + + /* validate the ATAG */ + if (atag->hdr.tag != ATAG_CORE || + (atag->hdr.size != tag_size(tag_core) && + atag->hdr.size != 2)) + return 1; + + /* let's give it all the room it could need */ + ret = fdt_open_into(fdt, fdt, total_space); + if (ret < 0) + return ret; + + for_each_tag(atag, atag_list) { + if (atag->hdr.tag == ATAG_CMDLINE) { + setprop_string(fdt, "/chosen", "bootargs", + atag->u.cmdline.cmdline); + } else if (atag->hdr.tag == ATAG_MEM) { + if (memcount >= sizeof(mem_reg_property)/4) + continue; + mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start); + mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size); + } else if (atag->hdr.tag == ATAG_INITRD2) { + uint32_t initrd_start, initrd_size; + initrd_start = atag->u.initrd.start; + initrd_size = atag->u.initrd.size; + setprop_cell(fdt, "/chosen", "linux,initrd-start", + initrd_start); + setprop_cell(fdt, "/chosen", "linux,initrd-end", + initrd_start + initrd_size); + } + } + + if (memcount) + setprop(fdt, "/memory", "reg", mem_reg_property, 4*memcount); + + return fdt_pack(fdt); +} diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index e95a5989602..9f5ac11ccd8 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -216,6 +216,103 @@ restart: adr r0, LC0 mov r10, r6 #endif + mov r5, #0 @ init dtb size to 0 +#ifdef CONFIG_ARM_APPENDED_DTB +/* + * r0 = delta + * r2 = BSS start + * r3 = BSS end + * r4 = final kernel address + * r5 = appended dtb size (still unknown) + * r6 = _edata + * r7 = architecture ID + * r8 = atags/device tree pointer + * r9 = size of decompressed image + * r10 = end of this image, including bss/stack/malloc space if non XIP + * r11 = GOT start + * r12 = GOT end + * sp = stack pointer + * + * if there are device trees (dtb) appended to zImage, advance r10 so that the + * dtb data will get relocated along with the kernel if necessary. + */ + + ldr lr, [r6, #0] +#ifndef __ARMEB__ + ldr r1, =0xedfe0dd0 @ sig is 0xd00dfeed big endian +#else + ldr r1, =0xd00dfeed +#endif + cmp lr, r1 + bne dtb_check_done @ not found + +#ifdef CONFIG_ARM_ATAG_DTB_COMPAT + /* + * OK... Let's do some funky business here. + * If we do have a DTB appended to zImage, and we do have + * an ATAG list around, we want the later to be translated + * and folded into the former here. To be on the safe side, + * let's temporarily move the stack away into the malloc + * area. No GOT fixup has occurred yet, but none of the + * code we're about to call uses any global variable. + */ + add sp, sp, #0x10000 + stmfd sp!, {r0-r3, ip, lr} + mov r0, r8 + mov r1, r6 + sub r2, sp, r6 + bl atags_to_fdt + + /* + * If returned value is 1, there is no ATAG at the location + * pointed by r8. Try the typical 0x100 offset from start + * of RAM and hope for the best. + */ + cmp r0, #1 + sub r0, r4, #(TEXT_OFFSET - 0x100) + mov r1, r6 + sub r2, sp, r6 + blne atags_to_fdt + + ldmfd sp!, {r0-r3, ip, lr} + sub sp, sp, #0x10000 +#endif + + mov r8, r6 @ use the appended device tree + + /* + * Make sure that the DTB doesn't end up in the final + * kernel's .bss area. To do so, we adjust the decompressed + * kernel size to compensate if that .bss size is larger + * than the relocated code. + */ + ldr r5, =_kernel_bss_size + adr r1, wont_overwrite + sub r1, r6, r1 + subs r1, r5, r1 + addhi r9, r9, r1 + + /* Get the dtb's size */ + ldr r5, [r6, #4] +#ifndef __ARMEB__ + /* convert r5 (dtb size) to little endian */ + eor r1, r5, r5, ror #16 + bic r1, r1, #0x00ff0000 + mov r5, r5, ror #8 + eor r5, r5, r1, lsr #8 +#endif + + /* preserve 64-bit alignment */ + add r5, r5, #7 + bic r5, r5, #7 + + /* relocate some pointers past the appended dtb */ + add r6, r6, r5 + add r10, r10, r5 + add sp, sp, r5 +dtb_check_done: +#endif + /* * Check to see if we will overwrite ourselves. * r4 = final kernel address @@ -223,15 +320,14 @@ restart: adr r0, LC0 * r10 = end of this image, including bss/stack/malloc space if non XIP * We basically want: * r4 - 16k page directory >= r10 -> OK - * r4 + image length <= current position (pc) -> OK + * r4 + image length <= address of wont_overwrite -> OK */ add r10, r10, #16384 cmp r4, r10 bhs wont_overwrite add r10, r4, r9 - ARM( cmp r10, pc ) - THUMB( mov lr, pc ) - THUMB( cmp r10, lr ) + adr r9, wont_overwrite + cmp r10, r9 bls wont_overwrite /* @@ -285,14 +381,16 @@ wont_overwrite: * r2 = BSS start * r3 = BSS end * r4 = kernel execution address + * r5 = appended dtb size (0 if not present) * r7 = architecture ID * r8 = atags pointer * r11 = GOT start * r12 = GOT end * sp = stack pointer */ - teq r0, #0 + orrs r1, r0, r5 beq not_relocated + add r11, r11, r0 add r12, r12, r0 @@ -307,12 +405,21 @@ wont_overwrite: /* * Relocate all entries in the GOT table. + * Bump bss entries to _edata + dtb size */ 1: ldr r1, [r11, #0] @ relocate entries in the GOT - add r1, r1, r0 @ table. This fixes up the - str r1, [r11], #4 @ C references. + add r1, r1, r0 @ This fixes up C references + cmp r1, r2 @ if entry >= bss_start && + cmphs r3, r1 @ bss_end > entry + addhi r1, r1, r5 @ entry += dtb size + str r1, [r11], #4 @ next entry cmp r11, r12 blo 1b + + /* bump our bss pointers too */ + add r2, r2, r5 + add r3, r3, r5 + #else /* diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h new file mode 100644 index 00000000000..1f4e71876b0 --- /dev/null +++ b/arch/arm/boot/compressed/libfdt_env.h @@ -0,0 +1,15 @@ +#ifndef _ARM_LIBFDT_ENV_H +#define _ARM_LIBFDT_ENV_H + +#include <linux/types.h> +#include <linux/string.h> +#include <asm/byteorder.h> + +#define fdt16_to_cpu(x) be16_to_cpu(x) +#define cpu_to_fdt16(x) cpu_to_be16(x) +#define fdt32_to_cpu(x) be32_to_cpu(x) +#define cpu_to_fdt32(x) cpu_to_be32(x) +#define fdt64_to_cpu(x) be64_to_cpu(x) +#define cpu_to_fdt64(x) cpu_to_be64(x) + +#endif diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 832d37236c5..8e2a8fca5ed 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -18,14 +18,9 @@ unsigned int __machine_arch_type; -#define _LINUX_STRING_H_ - #include <linux/compiler.h> /* for inline */ -#include <linux/types.h> /* for size_t */ -#include <linux/stddef.h> /* for NULL */ +#include <linux/types.h> #include <linux/linkage.h> -#include <asm/string.h> - static void putstr(const char *ptr); extern void error(char *x); @@ -101,41 +96,6 @@ static void putstr(const char *ptr) flush(); } - -void *memcpy(void *__dest, __const void *__src, size_t __n) -{ - int i = 0; - unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src; - - for (i = __n >> 3; i > 0; i--) { - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - } - - if (__n & 1 << 2) { - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - } - - if (__n & 1 << 1) { - *d++ = *s++; - *d++ = *s++; - } - - if (__n & 1) - *d++ = *s++; - - return __dest; -} - /* * gzip declarations */ diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c new file mode 100644 index 00000000000..36e53ef9200 --- /dev/null +++ b/arch/arm/boot/compressed/string.c @@ -0,0 +1,127 @@ +/* + * arch/arm/boot/compressed/string.c + * + * Small subset of simple string routines + */ + +#include <linux/string.h> + +void *memcpy(void *__dest, __const void *__src, size_t __n) +{ + int i = 0; + unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src; + + for (i = __n >> 3; i > 0; i--) { + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + } + + if (__n & 1 << 2) { + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + } + + if (__n & 1 << 1) { + *d++ = *s++; + *d++ = *s++; + } + + if (__n & 1) + *d++ = *s++; + + return __dest; +} + +void *memmove(void *__dest, __const void *__src, size_t count) +{ + unsigned char *d = __dest; + const unsigned char *s = __src; + + if (__dest == __src) + return __dest; + + if (__dest < __src) + return memcpy(__dest, __src, count); + + while (count--) + d[count] = s[count]; + return __dest; +} + +size_t strlen(const char *s) +{ + const char *sc = s; + + while (*sc != '\0') + sc++; + return sc - s; +} + +int memcmp(const void *cs, const void *ct, size_t count) +{ + const unsigned char *su1 = cs, *su2 = ct, *end = su1 + count; + int res = 0; + + while (su1 < end) { + res = *su1++ - *su2++; + if (res) + break; + } + return res; +} + +int strcmp(const char *cs, const char *ct) +{ + unsigned char c1, c2; + int res = 0; + + do { + c1 = *cs++; + c2 = *ct++; + res = c1 - c2; + if (res) + break; + } while (c1); + return res; +} + +void *memchr(const void *s, int c, size_t count) +{ + const unsigned char *p = s; + + while (count--) + if ((unsigned char)c == *p++) + return (void *)(p - 1); + return NULL; +} + +char *strchr(const char *s, int c) +{ + while (*s != (char)c) + if (*s++ == '\0') + return NULL; + return (char *)s; +} + +#undef memset + +void *memset(void *s, int c, size_t count) +{ + char *xs = s; + while (count--) + *xs++ = c; + return s; +} + +void __memzero(void *s, size_t count) +{ + memset(s, 0, count); +} diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in index 4e728834a1b..4919f2ac8b8 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.in +++ b/arch/arm/boot/compressed/vmlinux.lds.in @@ -51,6 +51,10 @@ SECTIONS _got_start = .; .got : { *(.got) } _got_end = .; + + /* ensure the zImage file size is always a multiple of 64 bits */ + /* (without a dummy byte, ld just ignores the empty section) */ + .pad : { BYTE(0); . = ALIGN(8); } _edata = .; . = BSS_START; diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index a2b32050393..016c1aeb847 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -26,6 +26,7 @@ #include <linux/kernel.h> #include <linux/list.h> #include <linux/smp.h> +#include <linux/cpu_pm.h> #include <linux/cpumask.h> #include <linux/io.h> #include <linux/interrupt.h> @@ -286,6 +287,8 @@ static void __init gic_dist_init(struct gic_chip_data *gic, if (gic_irqs > 1020) gic_irqs = 1020; + gic->gic_irqs = gic_irqs; + /* * Nobody would be insane enough to use PPIs on a secondary * GIC, right? @@ -380,6 +383,189 @@ static void __cpuinit gic_cpu_init(struct gic_chip_data *gic) writel_relaxed(1, base + GIC_CPU_CTRL); } +#ifdef CONFIG_CPU_PM +/* + * Saves the GIC distributor registers during suspend or idle. Must be called + * with interrupts disabled but before powering down the GIC. After calling + * this function, no interrupts will be delivered by the GIC, and another + * platform-specific wakeup source must be enabled. + */ +static void gic_dist_save(unsigned int gic_nr) +{ + unsigned int gic_irqs; + void __iomem *dist_base; + int i; + + if (gic_nr >= MAX_GIC_NR) + BUG(); + + gic_irqs = gic_data[gic_nr].gic_irqs; + dist_base = gic_data[gic_nr].dist_base; + + if (!dist_base) + return; + + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++) + gic_data[gic_nr].saved_spi_conf[i] = + readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4); + + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++) + gic_data[gic_nr].saved_spi_target[i] = + readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4); + + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) + gic_data[gic_nr].saved_spi_enable[i] = + readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4); +} + +/* + * Restores the GIC distributor registers during resume or when coming out of + * idle. Must be called before enabling interrupts. If a level interrupt + * that occured while the GIC was suspended is still present, it will be + * handled normally, but any edge interrupts that occured will not be seen by + * the GIC and need to be handled by the platform-specific wakeup source. + */ +static void gic_dist_restore(unsigned int gic_nr) +{ + unsigned int gic_irqs; + unsigned int i; + void __iomem *dist_base; + + if (gic_nr >= MAX_GIC_NR) + BUG(); + + gic_irqs = gic_data[gic_nr].gic_irqs; + dist_base = gic_data[gic_nr].dist_base; + + if (!dist_base) + return; + + writel_relaxed(0, dist_base + GIC_DIST_CTRL); + + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++) + writel_relaxed(gic_data[gic_nr].saved_spi_conf[i], + dist_base + GIC_DIST_CONFIG + i * 4); + + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++) + writel_relaxed(0xa0a0a0a0, + dist_base + GIC_DIST_PRI + i * 4); + + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++) + writel_relaxed(gic_data[gic_nr].saved_spi_target[i], + dist_base + GIC_DIST_TARGET + i * 4); + + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) + writel_relaxed(gic_data[gic_nr].saved_spi_enable[i], + dist_base + GIC_DIST_ENABLE_SET + i * 4); + + writel_relaxed(1, dist_base + GIC_DIST_CTRL); +} + +static void gic_cpu_save(unsigned int gic_nr) +{ + int i; + u32 *ptr; + void __iomem *dist_base; + void __iomem *cpu_base; + + if (gic_nr >= MAX_GIC_NR) + BUG(); + + dist_base = gic_data[gic_nr].dist_base; + cpu_base = gic_data[gic_nr].cpu_base; + + if (!dist_base || !cpu_base) + return; + + ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable); + for (i = 0; i < DIV_ROUND_UP(32, 32); i++) + ptr[i] = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4); + + ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf); + for (i = 0; i < DIV_ROUND_UP(32, 16); i++) + ptr[i] = readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4); + +} + +static void gic_cpu_restore(unsigned int gic_nr) +{ + int i; + u32 *ptr; + void __iomem *dist_base; + void __iomem *cpu_base; + + if (gic_nr >= MAX_GIC_NR) + BUG(); + + dist_base = gic_data[gic_nr].dist_base; + cpu_base = gic_data[gic_nr].cpu_base; + + if (!dist_base || !cpu_base) + return; + + ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable); + for (i = 0; i < DIV_ROUND_UP(32, 32); i++) + writel_relaxed(ptr[i], dist_base + GIC_DIST_ENABLE_SET + i * 4); + + ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf); + for (i = 0; i < DIV_ROUND_UP(32, 16); i++) + writel_relaxed(ptr[i], dist_base + GIC_DIST_CONFIG + i * 4); + + for (i = 0; i < DIV_ROUND_UP(32, 4); i++) + writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4); + + writel_relaxed(0xf0, cpu_base + GIC_CPU_PRIMASK); + writel_relaxed(1, cpu_base + GIC_CPU_CTRL); +} + +static int gic_notifier(struct notifier_block *self, unsigned long cmd, void *v) +{ + int i; + + for (i = 0; i < MAX_GIC_NR; i++) { + switch (cmd) { + case CPU_PM_ENTER: + gic_cpu_save(i); + break; + case CPU_PM_ENTER_FAILED: + case CPU_PM_EXIT: + gic_cpu_restore(i); + break; + case CPU_CLUSTER_PM_ENTER: + gic_dist_save(i); + break; + case CPU_CLUSTER_PM_ENTER_FAILED: + case CPU_CLUSTER_PM_EXIT: + gic_dist_restore(i); + break; + } + } + + return NOTIFY_OK; +} + +static struct notifier_block gic_notifier_block = { + .notifier_call = gic_notifier, +}; + +static void __init gic_pm_init(struct gic_chip_data *gic) +{ + gic->saved_ppi_enable = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4, + sizeof(u32)); + BUG_ON(!gic->saved_ppi_enable); + + gic->saved_ppi_conf = __alloc_percpu(DIV_ROUND_UP(32, 16) * 4, + sizeof(u32)); + BUG_ON(!gic->saved_ppi_conf); + + cpu_pm_register_notifier(&gic_notifier_block); +} +#else +static void __init gic_pm_init(struct gic_chip_data *gic) +{ +} +#endif + void __init gic_init(unsigned int gic_nr, unsigned int irq_start, void __iomem *dist_base, void __iomem *cpu_base) { @@ -395,8 +581,10 @@ void __init gic_init(unsigned int gic_nr, unsigned int irq_start, if (gic_nr == 0) gic_cpu_base_addr = cpu_base; + gic_chip.flags |= gic_arch_extn.flags; gic_dist_init(gic, irq_start); gic_cpu_init(gic); + gic_pm_init(gic); } void __cpuinit gic_secondary_init(unsigned int gic_nr) diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 7a21d0bf713..7f27fab9d40 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -205,6 +205,13 @@ extern void *dma_alloc_writecombine(struct device *, size_t, dma_addr_t *, int dma_mmap_writecombine(struct device *, struct vm_area_struct *, void *, dma_addr_t, size_t); +/* + * This can be called during boot to increase the size of the consistent + * DMA region above it's default value of 2MB. It must be called before the + * memory allocator is initialised, i.e. before any core_initcall. + */ +extern void __init init_consistent_dma_size(unsigned long size); + #ifdef CONFIG_DMABOUNCE /* diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h index 2dadd50a77d..14867e12f20 100644 --- a/arch/arm/include/asm/hardware/gic.h +++ b/arch/arm/include/asm/hardware/gic.h @@ -45,6 +45,14 @@ struct gic_chip_data { unsigned int irq_offset; void __iomem *dist_base; void __iomem *cpu_base; +#ifdef CONFIG_CPU_PM + u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)]; + u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)]; + u32 saved_spi_target[DIV_ROUND_UP(1020, 4)]; + u32 __percpu *saved_ppi_enable; + u32 __percpu *saved_ppi_conf; +#endif + unsigned int gic_irqs; }; #endif diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h index f389b2704d8..c190bc992f0 100644 --- a/arch/arm/include/asm/hw_breakpoint.h +++ b/arch/arm/include/asm/hw_breakpoint.h @@ -50,6 +50,7 @@ static inline void decode_ctrl_reg(u32 reg, #define ARM_DEBUG_ARCH_V6_1 2 #define ARM_DEBUG_ARCH_V7_ECP14 3 #define ARM_DEBUG_ARCH_V7_MM 4 +#define ARM_DEBUG_ARCH_V7_1 5 /* Breakpoint */ #define ARM_BREAKPOINT_EXECUTE 0 @@ -57,6 +58,7 @@ static inline void decode_ctrl_reg(u32 reg, /* Watchpoints */ #define ARM_BREAKPOINT_LOAD 1 #define ARM_BREAKPOINT_STORE 2 +#define ARM_FSR_ACCESS_MASK (1 << 11) /* Privilege Levels */ #define ARM_BREAKPOINT_PRIV 1 diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 217aa1911dd..727da118bcc 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -17,7 +17,7 @@ struct sys_timer; struct machine_desc { unsigned int nr; /* architecture number */ const char *name; /* architecture name */ - unsigned long boot_params; /* tagged list */ + unsigned long atag_offset; /* tagged list (relative) */ const char **dt_compat; /* array of device tree * 'compatible' strings */ diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index d2fedb5aeb1..b36f3654bf5 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -29,6 +29,7 @@ struct map_desc { #define MT_MEMORY_NONCACHED 11 #define MT_MEMORY_DTCM 12 #define MT_MEMORY_ITCM 13 +#define MT_MEMORY_SO 14 #ifdef CONFIG_MMU extern void iotable_init(struct map_desc *, int); diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index b8de516e600..a8997d71084 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -16,9 +16,12 @@ #include <linux/compiler.h> #include <linux/const.h> #include <linux/types.h> -#include <mach/memory.h> #include <asm/sizes.h> +#ifdef CONFIG_NEED_MACH_MEMORY_H +#include <mach/memory.h> +#endif + /* * Allow for constants defined here to be used from assembly code * by prepending the UL suffix only with actual C code compilation. @@ -77,16 +80,7 @@ */ #define IOREMAP_MAX_ORDER 24 -/* - * Size of DMA-consistent memory region. Must be multiple of 2M, - * between 2MB and 14MB inclusive. - */ -#ifndef CONSISTENT_DMA_SIZE -#define CONSISTENT_DMA_SIZE SZ_2M -#endif - #define CONSISTENT_END (0xffe00000UL) -#define CONSISTENT_BASE (CONSISTENT_END - CONSISTENT_DMA_SIZE) #else /* CONFIG_MMU */ @@ -160,7 +154,6 @@ * so that all we need to do is modify the 8-bit constant field. */ #define __PV_BITS_31_24 0x81000000 -#define __PV_BITS_23_16 0x00810000 extern unsigned long __pv_phys_offset; #define PHYS_OFFSET __pv_phys_offset @@ -178,9 +171,6 @@ static inline unsigned long __virt_to_phys(unsigned long x) { unsigned long t; __pv_stub(x, t, "add", __PV_BITS_31_24); -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - __pv_stub(t, t, "add", __PV_BITS_23_16); -#endif return t; } @@ -188,9 +178,6 @@ static inline unsigned long __phys_to_virt(unsigned long x) { unsigned long t; __pv_stub(x, t, "sub", __PV_BITS_31_24); -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - __pv_stub(t, t, "sub", __PV_BITS_23_16); -#endif return t; } #else @@ -200,7 +187,11 @@ static inline unsigned long __phys_to_virt(unsigned long x) #endif #ifndef PHYS_OFFSET +#ifdef PLAT_PHYS_OFFSET #define PHYS_OFFSET PLAT_PHYS_OFFSET +#else +#define PHYS_OFFSET UL(CONFIG_PHYS_OFFSET) +#endif #endif /* diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h index 543b44916d2..6c6809f982f 100644 --- a/arch/arm/include/asm/module.h +++ b/arch/arm/include/asm/module.h @@ -31,11 +31,7 @@ struct mod_arch_specific { /* Add __virt_to_phys patching state as well */ #ifdef CONFIG_ARM_PATCH_PHYS_VIRT -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT -#define MODULE_ARCH_VERMAGIC_P2V "p2v16 " -#else #define MODULE_ARCH_VERMAGIC_P2V "p2v8 " -#endif #else #define MODULE_ARCH_VERMAGIC_P2V "" #endif diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 5750704e027..f1956b27ae5 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -232,6 +232,9 @@ extern pgprot_t pgprot_kernel; #define pgprot_writecombine(prot) \ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE) +#define pgprot_stronglyordered(prot) \ + __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED) + #ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE #define pgprot_dmacoherent(prot) \ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE | L_PTE_XN) diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index b7e82c4aced..71d99b83cdb 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -13,7 +13,12 @@ #define __ARM_PMU_H__ #include <linux/interrupt.h> +#include <linux/perf_event.h> +/* + * Types of PMUs that can be accessed directly and require mutual + * exclusion between profiling tools. + */ enum arm_pmu_type { ARM_PMU_DEVICE_CPU = 0, ARM_NUM_PMU_DEVICES, @@ -37,21 +42,17 @@ struct arm_pmu_platdata { * reserve_pmu() - reserve the hardware performance counters * * Reserve the hardware performance counters in the system for exclusive use. - * The platform_device for the system is returned on success, ERR_PTR() - * encoded error on failure. + * Returns 0 on success or -EBUSY if the lock is already held. */ -extern struct platform_device * +extern int reserve_pmu(enum arm_pmu_type type); /** * release_pmu() - Relinquish control of the performance counters * * Release the performance counters and allow someone else to use them. - * Callers must have disabled the counters and released IRQs before calling - * this. The platform_device returned from reserve_pmu() must be passed as - * a cookie. */ -extern int +extern void release_pmu(enum arm_pmu_type type); /** @@ -68,24 +69,78 @@ init_pmu(enum arm_pmu_type type); #include <linux/err.h> -static inline struct platform_device * -reserve_pmu(enum arm_pmu_type type) -{ - return ERR_PTR(-ENODEV); -} - static inline int -release_pmu(enum arm_pmu_type type) +reserve_pmu(enum arm_pmu_type type) { return -ENODEV; } -static inline int -init_pmu(enum arm_pmu_type type) -{ - return -ENODEV; -} +static inline void +release_pmu(enum arm_pmu_type type) { } #endif /* CONFIG_CPU_HAS_PMU */ +#ifdef CONFIG_HW_PERF_EVENTS + +/* The events for a given PMU register set. */ +struct pmu_hw_events { + /* + * The events that are active on the PMU for the given index. + */ + struct perf_event **events; + + /* + * A 1 bit for an index indicates that the counter is being used for + * an event. A 0 means that the counter can be used. + */ + unsigned long *used_mask; + + /* + * Hardware lock to serialize accesses to PMU registers. Needed for the + * read/modify/write sequences. + */ + raw_spinlock_t pmu_lock; +}; + +struct arm_pmu { + struct pmu pmu; + enum arm_perf_pmu_ids id; + enum arm_pmu_type type; + cpumask_t active_irqs; + const char *name; + irqreturn_t (*handle_irq)(int irq_num, void *dev); + void (*enable)(struct hw_perf_event *evt, int idx); + void (*disable)(struct hw_perf_event *evt, int idx); + int (*get_event_idx)(struct pmu_hw_events *hw_events, + struct hw_perf_event *hwc); + int (*set_event_filter)(struct hw_perf_event *evt, + struct perf_event_attr *attr); + u32 (*read_counter)(int idx); + void (*write_counter)(int idx, u32 val); + void (*start)(void); + void (*stop)(void); + void (*reset)(void *); + int (*map_event)(struct perf_event *event); + int num_events; + atomic_t active_events; + struct mutex reserve_mutex; + u64 max_period; + struct platform_device *plat_device; + struct pmu_hw_events *(*get_hw_events)(void); +}; + +#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu)) + +int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type); + +u64 armpmu_event_update(struct perf_event *event, + struct hw_perf_event *hwc, + int idx, int overflow); + +int armpmu_event_set_period(struct perf_event *event, + struct hw_perf_event *hwc, + int idx); + +#endif /* CONFIG_HW_PERF_EVENTS */ + #endif /* __ARM_PMU_H__ */ diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h index 633d1cb84d8..9e92cb205e6 100644 --- a/arch/arm/include/asm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -81,6 +81,10 @@ extern void cpu_dcache_clean_area(void *, int); extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm); extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); extern void cpu_reset(unsigned long addr) __attribute__((noreturn)); + +/* These three are private to arch/arm/kernel/suspend.c */ +extern void cpu_do_suspend(void *); +extern void cpu_do_resume(void *); #else #define cpu_proc_init processor._proc_init #define cpu_proc_fin processor._proc_fin @@ -89,6 +93,10 @@ extern void cpu_reset(unsigned long addr) __attribute__((noreturn)); #define cpu_dcache_clean_area processor.dcache_clean_area #define cpu_set_pte_ext processor.set_pte_ext #define cpu_do_switch_mm processor.switch_mm + +/* These three are private to arch/arm/kernel/suspend.c */ +#define cpu_do_suspend processor.do_suspend +#define cpu_do_resume processor.do_resume #endif extern void cpu_resume(void); diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h index b0e4e1a0231..1c0a551ae37 100644 --- a/arch/arm/include/asm/suspend.h +++ b/arch/arm/include/asm/suspend.h @@ -1,22 +1,7 @@ #ifndef __ASM_ARM_SUSPEND_H #define __ASM_ARM_SUSPEND_H -#include <asm/memory.h> -#include <asm/tlbflush.h> - extern void cpu_resume(void); - -/* - * Hide the first two arguments to __cpu_suspend - these are an implementation - * detail which platform code shouldn't have to know about. - */ -static inline int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) -{ - extern int __cpu_suspend(int, long, unsigned long, - int (*)(unsigned long)); - int ret = __cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, arg, fn); - flush_tlb_all(); - return ret; -} +extern int cpu_suspend(unsigned long, int (*)(unsigned long)); #endif diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index c687bceba7d..7cac26c5f50 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -29,7 +29,7 @@ obj-$(CONFIG_MODULES) += armksyms.o module.o obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o -obj-$(CONFIG_PM_SLEEP) += sleep.o +obj-$(CONFIG_PM_SLEEP) += sleep.o suspend.o obj-$(CONFIG_HAVE_SCHED_CLOCK) += sched_clock.o obj-$(CONFIG_SMP) += smp.o smp_tlb.o obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o @@ -43,6 +43,13 @@ obj-$(CONFIG_KPROBES) += kprobes-thumb.o else obj-$(CONFIG_KPROBES) += kprobes-arm.o endif +obj-$(CONFIG_ARM_KPROBES_TEST) += test-kprobes.o +test-kprobes-objs := kprobes-test.o +ifdef CONFIG_THUMB2_KERNEL +test-kprobes-objs += kprobes-test-thumb.o +else +test-kprobes-objs += kprobes-test-arm.o +endif obj-$(CONFIG_ATAGS_PROC) += atags.o obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o obj-$(CONFIG_ARM_THUMBEE) += thumbee.o diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index bcd66e00bdb..b7685f1bb04 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -22,7 +22,7 @@ #if defined(CONFIG_DEBUG_ICEDCC) @@ debug using ARM EmbeddedICE DCC channel - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp .endm #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7) @@ -106,7 +106,7 @@ #ifdef CONFIG_MMU .macro addruart_current, rx, tmp1, tmp2 - addruart \tmp1, \tmp2 + addruart \tmp1, \tmp2, \rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 moveq \rx, \tmp1 diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 742b6108a00..673c806cc10 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -95,7 +95,7 @@ ENTRY(stext) sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET) add r8, r8, r4 @ PHYS_OFFSET #else - ldr r8, =PLAT_PHYS_OFFSET + ldr r8, =PHYS_OFFSET @ always constant in this case #endif /* @@ -234,7 +234,7 @@ __create_page_tables: * This allows debug messages to be output * via a serial console before paging_init. */ - addruart r7, r3 + addruart r7, r3, r0 mov r3, r3, lsr #20 mov r3, r3, lsl #2 @@ -488,13 +488,8 @@ __fixup_pv_table: add r5, r5, r3 @ adjust table end address add r7, r7, r3 @ adjust __pv_phys_offset address str r8, [r7] @ save computed PHYS_OFFSET to __pv_phys_offset -#ifndef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT mov r6, r3, lsr #24 @ constant for add/sub instructions teq r3, r6, lsl #24 @ must be 16MiB aligned -#else - mov r6, r3, lsr #16 @ constant for add/sub instructions - teq r3, r6, lsl #16 @ must be 64kiB aligned -#endif THUMB( it ne @ cross section branch ) bne __error str r6, [r7, #4] @ save to __pv_offset @@ -510,20 +505,8 @@ ENDPROC(__fixup_pv_table) .text __fixup_a_pv_table: #ifdef CONFIG_THUMB2_KERNEL -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - lsls r0, r6, #24 - lsr r6, #8 - beq 1f - clz r7, r0 - lsr r0, #24 - lsl r0, r7 - bic r0, 0x0080 - lsrs r7, #1 - orrcs r0, #0x0080 - orr r0, r0, r7, lsl #12 -#endif -1: lsls r6, #24 - beq 4f + lsls r6, #24 + beq 2f clz r7, r6 lsr r6, #24 lsl r6, r7 @@ -532,43 +515,25 @@ __fixup_a_pv_table: orrcs r6, #0x0080 orr r6, r6, r7, lsl #12 orr r6, #0x4000 - b 4f -2: @ at this point the C flag is always clear - add r7, r3 -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - ldrh ip, [r7] - tst ip, 0x0400 @ the i bit tells us LS or MS byte - beq 3f - cmp r0, #0 @ set C flag, and ... - biceq ip, 0x0400 @ immediate zero value has a special encoding - streqh ip, [r7] @ that requires the i bit cleared -#endif -3: ldrh ip, [r7, #2] + b 2f +1: add r7, r3 + ldrh ip, [r7, #2] and ip, 0x8f00 - orrcc ip, r6 @ mask in offset bits 31-24 - orrcs ip, r0 @ mask in offset bits 23-16 + orr ip, r6 @ mask in offset bits 31-24 strh ip, [r7, #2] -4: cmp r4, r5 +2: cmp r4, r5 ldrcc r7, [r4], #4 @ use branch for delay slot - bcc 2b + bcc 1b bx lr #else -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - and r0, r6, #255 @ offset bits 23-16 - mov r6, r6, lsr #8 @ offset bits 31-24 -#else - mov r0, #0 @ just in case... -#endif - b 3f -2: ldr ip, [r7, r3] + b 2f +1: ldr ip, [r7, r3] bic ip, ip, #0x000000ff - tst ip, #0x400 @ rotate shift tells us LS or MS byte - orrne ip, ip, r6 @ mask in offset bits 31-24 - orreq ip, ip, r0 @ mask in offset bits 23-16 + orr ip, ip, r6 @ mask in offset bits 31-24 str ip, [r7, r3] -3: cmp r4, r5 +2: cmp r4, r5 ldrcc r7, [r4], #4 @ use branch for delay slot - bcc 2b + bcc 1b mov pc, lr #endif ENDPROC(__fixup_a_pv_table) diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index a927ca1f556..814a52a9dc3 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -45,7 +45,6 @@ static DEFINE_PER_CPU(struct perf_event *, wp_on_reg[ARM_MAX_WRP]); /* Number of BRP/WRP registers on this CPU. */ static int core_num_brps; -static int core_num_reserved_brps; static int core_num_wrps; /* Debug architecture version. */ @@ -137,10 +136,11 @@ static u8 get_debug_arch(void) u32 didr; /* Do we implement the extended CPUID interface? */ - if (WARN_ONCE((((read_cpuid_id() >> 16) & 0xf) != 0xf), - "CPUID feature registers not supported. " - "Assuming v6 debug is present.\n")) + if (((read_cpuid_id() >> 16) & 0xf) != 0xf) { + pr_warning("CPUID feature registers not supported. " + "Assuming v6 debug is present.\n"); return ARM_DEBUG_ARCH_V6; + } ARM_DBG_READ(c0, 0, didr); return (didr >> 16) & 0xf; @@ -154,10 +154,21 @@ u8 arch_get_debug_arch(void) static int debug_arch_supported(void) { u8 arch = get_debug_arch(); - return arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14; + + /* We don't support the memory-mapped interface. */ + return (arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14) || + arch >= ARM_DEBUG_ARCH_V7_1; +} + +/* Determine number of WRP registers available. */ +static int get_num_wrp_resources(void) +{ + u32 didr; + ARM_DBG_READ(c0, 0, didr); + return ((didr >> 28) & 0xf) + 1; } -/* Determine number of BRP register available. */ +/* Determine number of BRP registers available. */ static int get_num_brp_resources(void) { u32 didr; @@ -176,9 +187,10 @@ static int core_has_mismatch_brps(void) static int get_num_wrps(void) { /* - * FIXME: When a watchpoint fires, the only way to work out which - * watchpoint it was is by disassembling the faulting instruction - * and working out the address of the memory access. + * On debug architectures prior to 7.1, when a watchpoint fires, the + * only way to work out which watchpoint it was is by disassembling + * the faulting instruction and working out the address of the memory + * access. * * Furthermore, we can only do this if the watchpoint was precise * since imprecise watchpoints prevent us from calculating register @@ -192,36 +204,17 @@ static int get_num_wrps(void) * [the ARM ARM states that the DFAR is UNKNOWN, but experience shows * that it is set on some implementations]. */ + if (get_debug_arch() < ARM_DEBUG_ARCH_V7_1) + return 1; -#if 0 - int wrps; - u32 didr; - ARM_DBG_READ(c0, 0, didr); - wrps = ((didr >> 28) & 0xf) + 1; -#endif - int wrps = 1; - - if (core_has_mismatch_brps() && wrps >= get_num_brp_resources()) - wrps = get_num_brp_resources() - 1; - - return wrps; -} - -/* We reserve one breakpoint for each watchpoint. */ -static int get_num_reserved_brps(void) -{ - if (core_has_mismatch_brps()) - return get_num_wrps(); - return 0; + return get_num_wrp_resources(); } /* Determine number of usable BRPs available. */ static int get_num_brps(void) { int brps = get_num_brp_resources(); - if (core_has_mismatch_brps()) - brps -= get_num_reserved_brps(); - return brps; + return core_has_mismatch_brps() ? brps - 1 : brps; } /* @@ -239,7 +232,7 @@ static int enable_monitor_mode(void) /* Ensure that halting mode is disabled. */ if (WARN_ONCE(dscr & ARM_DSCR_HDBGEN, - "halting debug mode enabled. Unable to access hardware resources.\n")) { + "halting debug mode enabled. Unable to access hardware resources.\n")) { ret = -EPERM; goto out; } @@ -255,6 +248,7 @@ static int enable_monitor_mode(void) ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN)); break; case ARM_DEBUG_ARCH_V7_ECP14: + case ARM_DEBUG_ARCH_V7_1: ARM_DBG_WRITE(c2, 2, (dscr | ARM_DSCR_MDBGEN)); break; default: @@ -346,24 +340,10 @@ int arch_install_hw_breakpoint(struct perf_event *bp) val_base = ARM_BASE_BVR; slots = (struct perf_event **)__get_cpu_var(bp_on_reg); max_slots = core_num_brps; - if (info->step_ctrl.enabled) { - /* Override the breakpoint data with the step data. */ - addr = info->trigger & ~0x3; - ctrl = encode_ctrl_reg(info->step_ctrl); - } } else { /* Watchpoint */ - if (info->step_ctrl.enabled) { - /* Install into the reserved breakpoint region. */ - ctrl_base = ARM_BASE_BCR + core_num_brps; - val_base = ARM_BASE_BVR + core_num_brps; - /* Override the watchpoint data with the step data. */ - addr = info->trigger & ~0x3; - ctrl = encode_ctrl_reg(info->step_ctrl); - } else { - ctrl_base = ARM_BASE_WCR; - val_base = ARM_BASE_WVR; - } + ctrl_base = ARM_BASE_WCR; + val_base = ARM_BASE_WVR; slots = (struct perf_event **)__get_cpu_var(wp_on_reg); max_slots = core_num_wrps; } @@ -382,6 +362,17 @@ int arch_install_hw_breakpoint(struct perf_event *bp) goto out; } + /* Override the breakpoint data with the step data. */ + if (info->step_ctrl.enabled) { + addr = info->trigger & ~0x3; + ctrl = encode_ctrl_reg(info->step_ctrl); + if (info->ctrl.type != ARM_BREAKPOINT_EXECUTE) { + i = 0; + ctrl_base = ARM_BASE_BCR + core_num_brps; + val_base = ARM_BASE_BVR + core_num_brps; + } + } + /* Setup the address register. */ write_wb_reg(val_base + i, addr); @@ -405,10 +396,7 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp) max_slots = core_num_brps; } else { /* Watchpoint */ - if (info->step_ctrl.enabled) - base = ARM_BASE_BCR + core_num_brps; - else - base = ARM_BASE_WCR; + base = ARM_BASE_WCR; slots = (struct perf_event **)__get_cpu_var(wp_on_reg); max_slots = core_num_wrps; } @@ -426,6 +414,13 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp) if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot\n")) return; + /* Ensure that we disable the mismatch breakpoint. */ + if (info->ctrl.type != ARM_BREAKPOINT_EXECUTE && + info->step_ctrl.enabled) { + i = 0; + base = ARM_BASE_BCR + core_num_brps; + } + /* Reset the control register. */ write_wb_reg(base + i, 0); } @@ -632,10 +627,9 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) * we can use the mismatch feature as a poor-man's hardware * single-step, but this only works for per-task breakpoints. */ - if (WARN_ONCE(!bp->overflow_handler && - (arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_brps() - || !bp->hw.bp_target), - "overflow handler required but none found\n")) { + if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) || + !core_has_mismatch_brps() || !bp->hw.bp_target)) { + pr_warning("overflow handler required but none found\n"); ret = -EINVAL; } out: @@ -666,34 +660,62 @@ static void disable_single_step(struct perf_event *bp) arch_install_hw_breakpoint(bp); } -static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs) +static void watchpoint_handler(unsigned long addr, unsigned int fsr, + struct pt_regs *regs) { - int i; + int i, access; + u32 val, ctrl_reg, alignment_mask; struct perf_event *wp, **slots; struct arch_hw_breakpoint *info; + struct arch_hw_breakpoint_ctrl ctrl; slots = (struct perf_event **)__get_cpu_var(wp_on_reg); - /* Without a disassembler, we can only handle 1 watchpoint. */ - BUG_ON(core_num_wrps > 1); - for (i = 0; i < core_num_wrps; ++i) { rcu_read_lock(); wp = slots[i]; - if (wp == NULL) { - rcu_read_unlock(); - continue; - } + if (wp == NULL) + goto unlock; + info = counter_arch_bp(wp); /* - * The DFAR is an unknown value. Since we only allow a - * single watchpoint, we can set the trigger to the lowest - * possible faulting address. + * The DFAR is an unknown value on debug architectures prior + * to 7.1. Since we only allow a single watchpoint on these + * older CPUs, we can set the trigger to the lowest possible + * faulting address. */ - info = counter_arch_bp(wp); - info->trigger = wp->attr.bp_addr; + if (debug_arch < ARM_DEBUG_ARCH_V7_1) { + BUG_ON(i > 0); + info->trigger = wp->attr.bp_addr; + } else { + if (info->ctrl.len == ARM_BREAKPOINT_LEN_8) + alignment_mask = 0x7; + else + alignment_mask = 0x3; + + /* Check if the watchpoint value matches. */ + val = read_wb_reg(ARM_BASE_WVR + i); + if (val != (addr & ~alignment_mask)) + goto unlock; + + /* Possible match, check the byte address select. */ + ctrl_reg = read_wb_reg(ARM_BASE_WCR + i); + decode_ctrl_reg(ctrl_reg, &ctrl); + if (!((1 << (addr & alignment_mask)) & ctrl.len)) + goto unlock; + + /* Check that the access type matches. */ + access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W : + HW_BREAKPOINT_R; + if (!(access & hw_breakpoint_type(wp))) + goto unlock; + + /* We have a winner. */ + info->trigger = addr; + } + pr_debug("watchpoint fired: address = 0x%x\n", info->trigger); perf_bp_event(wp, regs); @@ -705,6 +727,7 @@ static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs) if (!wp->overflow_handler) enable_single_step(wp, instruction_pointer(regs)); +unlock: rcu_read_unlock(); } } @@ -717,7 +740,7 @@ static void watchpoint_single_step_handler(unsigned long pc) slots = (struct perf_event **)__get_cpu_var(wp_on_reg); - for (i = 0; i < core_num_reserved_brps; ++i) { + for (i = 0; i < core_num_wrps; ++i) { rcu_read_lock(); wp = slots[i]; @@ -820,7 +843,7 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, case ARM_ENTRY_ASYNC_WATCHPOINT: WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n"); case ARM_ENTRY_SYNC_WATCHPOINT: - watchpoint_handler(addr, regs); + watchpoint_handler(addr, fsr, regs); break; default: ret = 1; /* Unhandled fault. */ @@ -834,11 +857,31 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, /* * One-time initialisation. */ -static void reset_ctrl_regs(void *info) +static cpumask_t debug_err_mask; + +static int debug_reg_trap(struct pt_regs *regs, unsigned int instr) { - int i, cpu = smp_processor_id(); + int cpu = smp_processor_id(); + + pr_warning("Debug register access (0x%x) caused undefined instruction on CPU %d\n", + instr, cpu); + + /* Set the error flag for this CPU and skip the faulting instruction. */ + cpumask_set_cpu(cpu, &debug_err_mask); + instruction_pointer(regs) += 4; + return 0; +} + +static struct undef_hook debug_reg_hook = { + .instr_mask = 0x0fe80f10, + .instr_val = 0x0e000e10, + .fn = debug_reg_trap, +}; + +static void reset_ctrl_regs(void *unused) +{ + int i, raw_num_brps, err = 0, cpu = smp_processor_id(); u32 dbg_power; - cpumask_t *cpumask = info; /* * v7 debug contains save and restore registers so that debug state @@ -848,38 +891,57 @@ static void reset_ctrl_regs(void *info) * Access Register to avoid taking undefined instruction exceptions * later on. */ - if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) { + switch (debug_arch) { + case ARM_DEBUG_ARCH_V6: + case ARM_DEBUG_ARCH_V6_1: + /* ARMv6 cores just need to reset the registers. */ + goto reset_regs; + case ARM_DEBUG_ARCH_V7_ECP14: /* * Ensure sticky power-down is clear (i.e. debug logic is * powered up). */ asm volatile("mrc p14, 0, %0, c1, c5, 4" : "=r" (dbg_power)); - if ((dbg_power & 0x1) == 0) { - pr_warning("CPU %d debug is powered down!\n", cpu); - cpumask_or(cpumask, cpumask, cpumask_of(cpu)); - return; - } - + if ((dbg_power & 0x1) == 0) + err = -EPERM; + break; + case ARM_DEBUG_ARCH_V7_1: /* - * Unconditionally clear the lock by writing a value - * other than 0xC5ACCE55 to the access register. + * Ensure the OS double lock is clear. */ - asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0)); - isb(); + asm volatile("mrc p14, 0, %0, c1, c3, 4" : "=r" (dbg_power)); + if ((dbg_power & 0x1) == 1) + err = -EPERM; + break; + } - /* - * Clear any configured vector-catch events before - * enabling monitor mode. - */ - asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0)); - isb(); + if (err) { + pr_warning("CPU %d debug is powered down!\n", cpu); + cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu)); + return; } + /* + * Unconditionally clear the lock by writing a value + * other than 0xC5ACCE55 to the access register. + */ + asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0)); + isb(); + + /* + * Clear any configured vector-catch events before + * enabling monitor mode. + */ + asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0)); + isb(); + +reset_regs: if (enable_monitor_mode()) return; /* We must also reset any reserved registers. */ - for (i = 0; i < core_num_brps + core_num_reserved_brps; ++i) { + raw_num_brps = get_num_brp_resources(); + for (i = 0; i < raw_num_brps; ++i) { write_wb_reg(ARM_BASE_BCR + i, 0UL); write_wb_reg(ARM_BASE_BVR + i, 0UL); } @@ -895,6 +957,7 @@ static int __cpuinit dbg_reset_notify(struct notifier_block *self, { if (action == CPU_ONLINE) smp_call_function_single((int)cpu, reset_ctrl_regs, NULL, 1); + return NOTIFY_OK; } @@ -905,7 +968,6 @@ static struct notifier_block __cpuinitdata dbg_reset_nb = { static int __init arch_hw_breakpoint_init(void) { u32 dscr; - cpumask_t cpumask = { CPU_BITS_NONE }; debug_arch = get_debug_arch(); @@ -916,28 +978,31 @@ static int __init arch_hw_breakpoint_init(void) /* Determine how many BRPs/WRPs are available. */ core_num_brps = get_num_brps(); - core_num_reserved_brps = get_num_reserved_brps(); core_num_wrps = get_num_wrps(); - pr_info("found %d breakpoint and %d watchpoint registers.\n", - core_num_brps + core_num_reserved_brps, core_num_wrps); - - if (core_num_reserved_brps) - pr_info("%d breakpoint(s) reserved for watchpoint " - "single-step.\n", core_num_reserved_brps); + /* + * We need to tread carefully here because DBGSWENABLE may be + * driven low on this core and there isn't an architected way to + * determine that. + */ + register_undef_hook(&debug_reg_hook); /* * Reset the breakpoint resources. We assume that a halting * debugger will leave the world in a nice state for us. */ - on_each_cpu(reset_ctrl_regs, &cpumask, 1); - if (!cpumask_empty(&cpumask)) { + on_each_cpu(reset_ctrl_regs, NULL, 1); + unregister_undef_hook(&debug_reg_hook); + if (!cpumask_empty(&debug_err_mask)) { core_num_brps = 0; - core_num_reserved_brps = 0; core_num_wrps = 0; return 0; } + pr_info("found %d " "%s" "breakpoint and %d watchpoint registers.\n", + core_num_brps, core_has_mismatch_brps() ? "(+1 reserved) " : + "", core_num_wrps); + ARM_DBG_READ(c1, 0, dscr); if (dscr & ARM_DSCR_HDBGEN) { max_watchpoint_len = 4; diff --git a/arch/arm/kernel/kprobes-arm.c b/arch/arm/kernel/kprobes-arm.c index 79203ee1d03..9fe8910308a 100644 --- a/arch/arm/kernel/kprobes-arm.c +++ b/arch/arm/kernel/kprobes-arm.c @@ -60,6 +60,7 @@ #include <linux/kernel.h> #include <linux/kprobes.h> +#include <linux/module.h> #include "kprobes.h" @@ -971,6 +972,9 @@ const union decode_item kprobe_decode_arm_table[] = { DECODE_END }; +#ifdef CONFIG_ARM_KPROBES_TEST_MODULE +EXPORT_SYMBOL_GPL(kprobe_decode_arm_table); +#endif static void __kprobes arm_singlestep(struct kprobe *p, struct pt_regs *regs) { diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c new file mode 100644 index 00000000000..fc82de8bdcc --- /dev/null +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -0,0 +1,1323 @@ +/* + * arch/arm/kernel/kprobes-test-arm.c + * + * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> + +#include "kprobes-test.h" + + +#define TEST_ISA "32" + +#define TEST_ARM_TO_THUMB_INTERWORK_R(code1, reg, val, code2) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_REG(14, 99f) \ + TEST_ARG_END("") \ + "50: nop \n\t" \ + "1: "code1 #reg code2" \n\t" \ + " bx lr \n\t" \ + ".thumb \n\t" \ + "3: adr lr, 2f \n\t" \ + " bx lr \n\t" \ + ".arm \n\t" \ + "2: nop \n\t" \ + TESTCASE_END + +#define TEST_ARM_TO_THUMB_INTERWORK_P(code1, reg, val, code2) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_PTR(reg, val) \ + TEST_ARG_REG(14, 99f) \ + TEST_ARG_MEM(15, 3f+1) \ + TEST_ARG_END("") \ + "50: nop \n\t" \ + "1: "code1 #reg code2" \n\t" \ + " bx lr \n\t" \ + ".thumb \n\t" \ + "3: adr lr, 2f \n\t" \ + " bx lr \n\t" \ + ".arm \n\t" \ + "2: nop \n\t" \ + TESTCASE_END + + +void kprobe_arm_test_cases(void) +{ + kprobe_test_flags = 0; + + TEST_GROUP("Data-processing (register), (register-shifted register), (immediate)") + +#define _DATA_PROCESSING_DNM(op,s,val) \ + TEST_RR( op "eq" s " r0, r",1, VAL1,", r",2, val, "") \ + TEST_RR( op "ne" s " r1, r",1, VAL1,", r",2, val, ", lsl #3") \ + TEST_RR( op "cs" s " r2, r",3, VAL1,", r",2, val, ", lsr #4") \ + TEST_RR( op "cc" s " r3, r",3, VAL1,", r",2, val, ", asr #5") \ + TEST_RR( op "mi" s " r4, r",5, VAL1,", r",2, N(val),", asr #6") \ + TEST_RR( op "pl" s " r5, r",5, VAL1,", r",2, val, ", ror #7") \ + TEST_RR( op "vs" s " r6, r",7, VAL1,", r",2, val, ", rrx") \ + TEST_R( op "vc" s " r6, r",7, VAL1,", pc, lsl #3") \ + TEST_R( op "vc" s " r6, r",7, VAL1,", sp, lsr #4") \ + TEST_R( op "vc" s " r6, pc, r",7, VAL1,", asr #5") \ + TEST_R( op "vc" s " r6, sp, r",7, VAL1,", ror #6") \ + TEST_RRR( op "hi" s " r8, r",9, VAL1,", r",14,val, ", lsl r",0, 3,"")\ + TEST_RRR( op "ls" s " r9, r",9, VAL1,", r",14,val, ", lsr r",7, 4,"")\ + TEST_RRR( op "ge" s " r10, r",11,VAL1,", r",14,val, ", asr r",7, 5,"")\ + TEST_RRR( op "lt" s " r11, r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")\ + TEST_RR( op "gt" s " r12, r13" ", r",14,val, ", ror r",14,7,"")\ + TEST_RR( op "le" s " r14, r",0, val, ", r13" ", lsl r",14,8,"")\ + TEST_RR( op s " r12, pc" ", r",14,val, ", ror r",14,7,"")\ + TEST_RR( op s " r14, r",0, val, ", pc" ", lsl r",14,8,"")\ + TEST_R( op "eq" s " r0, r",11,VAL1,", #0xf5") \ + TEST_R( op "ne" s " r11, r",0, VAL1,", #0xf5000000") \ + TEST_R( op s " r7, r",8, VAL2,", #0x000af000") \ + TEST( op s " r4, pc" ", #0x00005a00") + +#define DATA_PROCESSING_DNM(op,val) \ + _DATA_PROCESSING_DNM(op,"",val) \ + _DATA_PROCESSING_DNM(op,"s",val) + +#define DATA_PROCESSING_NM(op,val) \ + TEST_RR( op "ne r",1, VAL1,", r",2, val, "") \ + TEST_RR( op "eq r",1, VAL1,", r",2, val, ", lsl #3") \ + TEST_RR( op "cc r",3, VAL1,", r",2, val, ", lsr #4") \ + TEST_RR( op "cs r",3, VAL1,", r",2, val, ", asr #5") \ + TEST_RR( op "pl r",5, VAL1,", r",2, N(val),", asr #6") \ + TEST_RR( op "mi r",5, VAL1,", r",2, val, ", ror #7") \ + TEST_RR( op "vc r",7, VAL1,", r",2, val, ", rrx") \ + TEST_R ( op "vs r",7, VAL1,", pc, lsl #3") \ + TEST_R ( op "vs r",7, VAL1,", sp, lsr #4") \ + TEST_R( op "vs pc, r",7, VAL1,", asr #5") \ + TEST_R( op "vs sp, r",7, VAL1,", ror #6") \ + TEST_RRR( op "ls r",9, VAL1,", r",14,val, ", lsl r",0, 3,"") \ + TEST_RRR( op "hi r",9, VAL1,", r",14,val, ", lsr r",7, 4,"") \ + TEST_RRR( op "lt r",11,VAL1,", r",14,val, ", asr r",7, 5,"") \ + TEST_RRR( op "ge r",11,VAL1,", r",14,N(val),", asr r",7, 6,"") \ + TEST_RR( op "le r13" ", r",14,val, ", ror r",14,7,"") \ + TEST_RR( op "gt r",0, val, ", r13" ", lsl r",14,8,"") \ + TEST_RR( op " pc" ", r",14,val, ", ror r",14,7,"") \ + TEST_RR( op " r",0, val, ", pc" ", lsl r",14,8,"") \ + TEST_R( op "eq r",11,VAL1,", #0xf5") \ + TEST_R( op "ne r",0, VAL1,", #0xf5000000") \ + TEST_R( op " r",8, VAL2,", #0x000af000") + +#define _DATA_PROCESSING_DM(op,s,val) \ + TEST_R( op "eq" s " r0, r",1, val, "") \ + TEST_R( op "ne" s " r1, r",1, val, ", lsl #3") \ + TEST_R( op "cs" s " r2, r",3, val, ", lsr #4") \ + TEST_R( op "cc" s " r3, r",3, val, ", asr #5") \ + TEST_R( op "mi" s " r4, r",5, N(val),", asr #6") \ + TEST_R( op "pl" s " r5, r",5, val, ", ror #7") \ + TEST_R( op "vs" s " r6, r",10,val, ", rrx") \ + TEST( op "vs" s " r7, pc, lsl #3") \ + TEST( op "vs" s " r7, sp, lsr #4") \ + TEST_RR( op "vc" s " r8, r",7, val, ", lsl r",0, 3,"") \ + TEST_RR( op "hi" s " r9, r",9, val, ", lsr r",7, 4,"") \ + TEST_RR( op "ls" s " r10, r",9, val, ", asr r",7, 5,"") \ + TEST_RR( op "ge" s " r11, r",11,N(val),", asr r",7, 6,"") \ + TEST_RR( op "lt" s " r12, r",11,val, ", ror r",14,7,"") \ + TEST_R( op "gt" s " r14, r13" ", lsl r",14,8,"") \ + TEST_R( op "le" s " r14, pc" ", lsl r",14,8,"") \ + TEST( op "eq" s " r0, #0xf5") \ + TEST( op "ne" s " r11, #0xf5000000") \ + TEST( op s " r7, #0x000af000") \ + TEST( op s " r4, #0x00005a00") + +#define DATA_PROCESSING_DM(op,val) \ + _DATA_PROCESSING_DM(op,"",val) \ + _DATA_PROCESSING_DM(op,"s",val) + + DATA_PROCESSING_DNM("and",0xf00f00ff) + DATA_PROCESSING_DNM("eor",0xf00f00ff) + DATA_PROCESSING_DNM("sub",VAL2) + DATA_PROCESSING_DNM("rsb",VAL2) + DATA_PROCESSING_DNM("add",VAL2) + DATA_PROCESSING_DNM("adc",VAL2) + DATA_PROCESSING_DNM("sbc",VAL2) + DATA_PROCESSING_DNM("rsc",VAL2) + DATA_PROCESSING_NM("tst",0xf00f00ff) + DATA_PROCESSING_NM("teq",0xf00f00ff) + DATA_PROCESSING_NM("cmp",VAL2) + DATA_PROCESSING_NM("cmn",VAL2) + DATA_PROCESSING_DNM("orr",0xf00f00ff) + DATA_PROCESSING_DM("mov",VAL2) + DATA_PROCESSING_DNM("bic",0xf00f00ff) + DATA_PROCESSING_DM("mvn",VAL2) + + TEST("mov ip, sp") /* This has special case emulation code */ + + TEST_SUPPORTED("mov pc, #0x1000"); + TEST_SUPPORTED("mov sp, #0x1000"); + TEST_SUPPORTED("cmp pc, #0x1000"); + TEST_SUPPORTED("cmp sp, #0x1000"); + + /* Data-processing with PC as shift*/ + TEST_UNSUPPORTED(".word 0xe15c0f1e @ cmp r12, r14, asl pc") + TEST_UNSUPPORTED(".word 0xe1a0cf1e @ mov r12, r14, asl pc") + TEST_UNSUPPORTED(".word 0xe08caf1e @ add r10, r12, r14, asl pc") + + /* Data-processing with PC as shift*/ + TEST_UNSUPPORTED("movs pc, r1") + TEST_UNSUPPORTED("movs pc, r1, lsl r2") + TEST_UNSUPPORTED("movs pc, #0x10000") + TEST_UNSUPPORTED("adds pc, lr, r1") + TEST_UNSUPPORTED("adds pc, lr, r1, lsl r2") + TEST_UNSUPPORTED("adds pc, lr, #4") + + /* Data-processing with SP as target */ + TEST("add sp, sp, #16") + TEST("sub sp, sp, #8") + TEST("bic sp, sp, #0x20") + TEST("orr sp, sp, #0x20") + TEST_PR( "add sp, r",10,0,", r",11,4,"") + TEST_PRR("add sp, r",10,0,", r",11,4,", asl r",12,1,"") + TEST_P( "mov sp, r",10,0,"") + TEST_PR( "mov sp, r",10,0,", asl r",12,0,"") + + /* Data-processing with PC as target */ + TEST_BF( "add pc, pc, #2f-1b-8") + TEST_BF_R ("add pc, pc, r",14,2f-1f-8,"") + TEST_BF_R ("add pc, r",14,2f-1f-8,", pc") + TEST_BF_R ("mov pc, r",0,2f,"") + TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"") + TEST_BB( "sub pc, pc, #1b-2b+8") +#if __LINUX_ARM_ARCH__ >= 6 + TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before ARMv6 */ +#endif + TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"") + TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc") + TEST_RR( "add pc, pc, r",10,-2,", asl r",11,1,"") +#ifdef CONFIG_THUMB2_KERNEL + TEST_ARM_TO_THUMB_INTERWORK_R("add pc, pc, r",0,3f-1f-8+1,"") + TEST_ARM_TO_THUMB_INTERWORK_R("sub pc, r",0,3f+8+1,", #8") +#endif + TEST_GROUP("Miscellaneous instructions") + + TEST("mrs r0, cpsr") + TEST("mrspl r7, cpsr") + TEST("mrs r14, cpsr") + TEST_UNSUPPORTED(".word 0xe10ff000 @ mrs r15, cpsr") + TEST_UNSUPPORTED("mrs r0, spsr") + TEST_UNSUPPORTED("mrs lr, spsr") + + TEST_UNSUPPORTED("msr cpsr, r0") + TEST_UNSUPPORTED("msr cpsr_f, lr") + TEST_UNSUPPORTED("msr spsr, r0") + + TEST_BF_R("bx r",0,2f,"") + TEST_BB_R("bx r",7,2f,"") + TEST_BF_R("bxeq r",14,2f,"") + + TEST_R("clz r0, r",0, 0x0,"") + TEST_R("clzeq r7, r",14,0x1,"") + TEST_R("clz lr, r",7, 0xffffffff,"") + TEST( "clz r4, sp") + TEST_UNSUPPORTED(".word 0x016fff10 @ clz pc, r0") + TEST_UNSUPPORTED(".word 0x016f0f1f @ clz r0, pc") + +#if __LINUX_ARM_ARCH__ >= 6 + TEST_UNSUPPORTED("bxj r0") +#endif + + TEST_BF_R("blx r",0,2f,"") + TEST_BB_R("blx r",7,2f,"") + TEST_BF_R("blxeq r",14,2f,"") + TEST_UNSUPPORTED(".word 0x0120003f @ blx pc") + + TEST_RR( "qadd r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "qaddvs lr, r",9, VAL2,", r",8, VAL1,"") + TEST_R( "qadd lr, r",9, VAL2,", r13") + TEST_RR( "qsub r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "qsubvs lr, r",9, VAL2,", r",8, VAL1,"") + TEST_R( "qsub lr, r",9, VAL2,", r13") + TEST_RR( "qdadd r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "qdaddvs lr, r",9, VAL2,", r",8, VAL1,"") + TEST_R( "qdadd lr, r",9, VAL2,", r13") + TEST_RR( "qdsub r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "qdsubvs lr, r",9, VAL2,", r",8, VAL1,"") + TEST_R( "qdsub lr, r",9, VAL2,", r13") + TEST_UNSUPPORTED(".word 0xe101f050 @ qadd pc, r0, r1") + TEST_UNSUPPORTED(".word 0xe121f050 @ qsub pc, r0, r1") + TEST_UNSUPPORTED(".word 0xe141f050 @ qdadd pc, r0, r1") + TEST_UNSUPPORTED(".word 0xe161f050 @ qdsub pc, r0, r1") + TEST_UNSUPPORTED(".word 0xe16f2050 @ qdsub r2, r0, pc") + TEST_UNSUPPORTED(".word 0xe161205f @ qdsub r2, pc, r1") + + TEST_UNSUPPORTED("bkpt 0xffff") + TEST_UNSUPPORTED("bkpt 0x0000") + + TEST_UNSUPPORTED(".word 0xe1600070 @ smc #0") + + TEST_GROUP("Halfword multiply and multiply-accumulate") + + TEST_RRR( "smlabb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlabbge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RR( "smlabb lr, r",1, VAL2,", r",2, VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe10f3281 @ smlabb pc, r1, r2, r3") + TEST_RRR( "smlatb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlatbge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RR( "smlatb lr, r",1, VAL2,", r",2, VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe10f32a1 @ smlatb pc, r1, r2, r3") + TEST_RRR( "smlabt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlabtge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RR( "smlabt lr, r",1, VAL2,", r",2, VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe10f32c1 @ smlabt pc, r1, r2, r3") + TEST_RRR( "smlatt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlattge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RR( "smlatt lr, r",1, VAL2,", r",2, VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe10f32e1 @ smlatt pc, r1, r2, r3") + + TEST_RRR( "smlawb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlawbge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RR( "smlawb lr, r",1, VAL2,", r",2, VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe12f3281 @ smlawb pc, r1, r2, r3") + TEST_RRR( "smlawt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlawtge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RR( "smlawt lr, r",1, VAL2,", r",2, VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe12f32c1 @ smlawt pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe12032cf @ smlawt r0, pc, r2, r3") + TEST_UNSUPPORTED(".word 0xe1203fc1 @ smlawt r0, r1, pc, r3") + TEST_UNSUPPORTED(".word 0xe120f2c1 @ smlawt r0, r1, r2, pc") + + TEST_RR( "smulwb r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smulwbge r7, r",8, VAL3,", r",9, VAL1,"") + TEST_R( "smulwb lr, r",1, VAL2,", r13") + TEST_UNSUPPORTED(".word 0xe12f02a1 @ smulwb pc, r1, r2") + TEST_RR( "smulwt r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smulwtge r7, r",8, VAL3,", r",9, VAL1,"") + TEST_R( "smulwt lr, r",1, VAL2,", r13") + TEST_UNSUPPORTED(".word 0xe12f02e1 @ smulwt pc, r1, r2") + + TEST_RRRR( "smlalbb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "smlalbble r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRR( "smlalbb r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13") + TEST_UNSUPPORTED(".word 0xe14f1382 @ smlalbb pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe141f382 @ smlalbb r1, pc, r2, r3") + TEST_RRRR( "smlaltb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "smlaltble r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRR( "smlaltb r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13") + TEST_UNSUPPORTED(".word 0xe14f13a2 @ smlaltb pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe141f3a2 @ smlaltb r1, pc, r2, r3") + TEST_RRRR( "smlalbt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "smlalbtle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRR( "smlalbt r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13") + TEST_UNSUPPORTED(".word 0xe14f13c2 @ smlalbt pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe141f3c2 @ smlalbt r1, pc, r2, r3") + TEST_RRRR( "smlaltt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "smlalttle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRR( "smlaltt r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13") + TEST_UNSUPPORTED(".word 0xe14f13e2 @ smlalbb pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe140f3e2 @ smlalbb r0, pc, r2, r3") + TEST_UNSUPPORTED(".word 0xe14013ef @ smlalbb r0, r1, pc, r3") + TEST_UNSUPPORTED(".word 0xe1401fe2 @ smlalbb r0, r1, r2, pc") + + TEST_RR( "smulbb r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smulbbge r7, r",8, VAL3,", r",9, VAL1,"") + TEST_R( "smulbb lr, r",1, VAL2,", r13") + TEST_UNSUPPORTED(".word 0xe16f0281 @ smulbb pc, r1, r2") + TEST_RR( "smultb r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smultbge r7, r",8, VAL3,", r",9, VAL1,"") + TEST_R( "smultb lr, r",1, VAL2,", r13") + TEST_UNSUPPORTED(".word 0xe16f02a1 @ smultb pc, r1, r2") + TEST_RR( "smulbt r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smulbtge r7, r",8, VAL3,", r",9, VAL1,"") + TEST_R( "smulbt lr, r",1, VAL2,", r13") + TEST_UNSUPPORTED(".word 0xe16f02c1 @ smultb pc, r1, r2") + TEST_RR( "smultt r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smulttge r7, r",8, VAL3,", r",9, VAL1,"") + TEST_R( "smultt lr, r",1, VAL2,", r13") + TEST_UNSUPPORTED(".word 0xe16f02e1 @ smultt pc, r1, r2") + TEST_UNSUPPORTED(".word 0xe16002ef @ smultt r0, pc, r2") + TEST_UNSUPPORTED(".word 0xe1600fe1 @ smultt r0, r1, pc") + + TEST_GROUP("Multiply and multiply-accumulate") + + TEST_RR( "mul r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "mulls r7, r",8, VAL2,", r",9, VAL2,"") + TEST_R( "mul lr, r",4, VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe00f0291 @ mul pc, r1, r2") + TEST_UNSUPPORTED(".word 0xe000029f @ mul r0, pc, r2") + TEST_UNSUPPORTED(".word 0xe0000f91 @ mul r0, r1, pc") + TEST_RR( "muls r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "mullss r7, r",8, VAL2,", r",9, VAL2,"") + TEST_R( "muls lr, r",4, VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe01f0291 @ muls pc, r1, r2") + + TEST_RRR( "mla r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "mlahi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RR( "mla lr, r",1, VAL2,", r",2, VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe02f3291 @ mla pc, r1, r2, r3") + TEST_RRR( "mlas r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "mlahis r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RR( "mlas lr, r",1, VAL2,", r",2, VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe03f3291 @ mlas pc, r1, r2, r3") + +#if __LINUX_ARM_ARCH__ >= 6 + TEST_RR( "umaal r0, r1, r",2, VAL1,", r",3, VAL2,"") + TEST_RR( "umaalls r7, r8, r",9, VAL2,", r",10, VAL1,"") + TEST_R( "umaal lr, r12, r",11,VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe041f392 @ umaal pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3") + TEST_UNSUPPORTED(".word 0xe0500090 @ undef") + TEST_UNSUPPORTED(".word 0xe05fff9f @ undef") + + TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "mlshi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RR( "mls lr, r",1, VAL2,", r",2, VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe06f3291 @ mls pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe060329f @ mls r0, pc, r2, r3") + TEST_UNSUPPORTED(".word 0xe0603f91 @ mls r0, r1, pc, r3") + TEST_UNSUPPORTED(".word 0xe060f291 @ mls r0, r1, r2, pc") +#endif + + TEST_UNSUPPORTED(".word 0xe0700090 @ undef") + TEST_UNSUPPORTED(".word 0xe07fff9f @ undef") + + TEST_RR( "umull r0, r1, r",2, VAL1,", r",3, VAL2,"") + TEST_RR( "umullls r7, r8, r",9, VAL2,", r",10, VAL1,"") + TEST_R( "umull lr, r12, r",11,VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe081f392 @ umull pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe08f1392 @ umull r1, pc, r2, r3") + TEST_RR( "umulls r0, r1, r",2, VAL1,", r",3, VAL2,"") + TEST_RR( "umulllss r7, r8, r",9, VAL2,", r",10, VAL1,"") + TEST_R( "umulls lr, r12, r",11,VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe091f392 @ umulls pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe09f1392 @ umulls r1, pc, r2, r3") + + TEST_RRRR( "umlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "umlalle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRR( "umlal r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13") + TEST_UNSUPPORTED(".word 0xe0af1392 @ umlal pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe0a1f392 @ umlal r1, pc, r2, r3") + TEST_RRRR( "umlals r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "umlalles r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRR( "umlals r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13") + TEST_UNSUPPORTED(".word 0xe0bf1392 @ umlals pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe0b1f392 @ umlals r1, pc, r2, r3") + + TEST_RR( "smull r0, r1, r",2, VAL1,", r",3, VAL2,"") + TEST_RR( "smullls r7, r8, r",9, VAL2,", r",10, VAL1,"") + TEST_R( "smull lr, r12, r",11,VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe0c1f392 @ smull pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe0cf1392 @ smull r1, pc, r2, r3") + TEST_RR( "smulls r0, r1, r",2, VAL1,", r",3, VAL2,"") + TEST_RR( "smulllss r7, r8, r",9, VAL2,", r",10, VAL1,"") + TEST_R( "smulls lr, r12, r",11,VAL3,", r13") + TEST_UNSUPPORTED(".word 0xe0d1f392 @ smulls pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe0df1392 @ smulls r1, pc, r2, r3") + + TEST_RRRR( "smlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "smlalle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRR( "smlal r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13") + TEST_UNSUPPORTED(".word 0xe0ef1392 @ smlal pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe0e1f392 @ smlal r1, pc, r2, r3") + TEST_RRRR( "smlals r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "smlalles r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRR( "smlals r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13") + TEST_UNSUPPORTED(".word 0xe0ff1392 @ smlals pc, r1, r2, r3") + TEST_UNSUPPORTED(".word 0xe0f0f392 @ smlals r0, pc, r2, r3") + TEST_UNSUPPORTED(".word 0xe0f0139f @ smlals r0, r1, pc, r3") + TEST_UNSUPPORTED(".word 0xe0f01f92 @ smlals r0, r1, r2, pc") + + TEST_GROUP("Synchronization primitives") + + /* + * Use hard coded constants for SWP instructions to avoid warnings + * about deprecated instructions. + */ + TEST_RP( ".word 0xe108e097 @ swp lr, r",7,VAL2,", [r",8,0,"]") + TEST_R( ".word 0x610d0091 @ swpvs r0, r",1,VAL1,", [sp]") + TEST_RP( ".word 0xe10cd09e @ swp sp, r",14,VAL2,", [r",12,13*4,"]") + TEST_UNSUPPORTED(".word 0xe102f091 @ swp pc, r1, [r2]") + TEST_UNSUPPORTED(".word 0xe102009f @ swp r0, pc, [r2]") + TEST_UNSUPPORTED(".word 0xe10f0091 @ swp r0, r1, [pc]") + TEST_RP( ".word 0xe148e097 @ swpb lr, r",7,VAL2,", [r",8,0,"]") + TEST_R( ".word 0x614d0091 @ swpvsb r0, r",1,VAL1,", [sp]") + TEST_UNSUPPORTED(".word 0xe142f091 @ swpb pc, r1, [r2]") + + TEST_UNSUPPORTED(".word 0xe1100090") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe1200090") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe1300090") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe1500090") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe1600090") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe1700090") /* Unallocated space */ +#if __LINUX_ARM_ARCH__ >= 6 + TEST_UNSUPPORTED("ldrex r2, [sp]") + TEST_UNSUPPORTED("strexd r0, r2, r3, [sp]") + TEST_UNSUPPORTED("ldrexd r2, r3, [sp]") + TEST_UNSUPPORTED("strexb r0, r2, [sp]") + TEST_UNSUPPORTED("ldrexb r2, [sp]") + TEST_UNSUPPORTED("strexh r0, r2, [sp]") + TEST_UNSUPPORTED("ldrexh r2, [sp]") +#endif + TEST_GROUP("Extra load/store instructions") + + TEST_RPR( "strh r",0, VAL1,", [r",1, 48,", -r",2, 24,"]") + TEST_RPR( "streqh r",14,VAL2,", [r",13,0, ", r",12, 48,"]") + TEST_RPR( "strh r",1, VAL1,", [r",2, 24,", r",3, 48,"]!") + TEST_RPR( "strneh r",12,VAL2,", [r",11,48,", -r",10,24,"]!") + TEST_RPR( "strh r",2, VAL1,", [r",3, 24,"], r",4, 48,"") + TEST_RPR( "strh r",10,VAL2,", [r",9, 48,"], -r",11,24,"") + TEST_UNSUPPORTED(".word 0xe1afc0ba @ strh r12, [pc, r10]!") + TEST_UNSUPPORTED(".word 0xe089f0bb @ strh pc, [r9], r11") + TEST_UNSUPPORTED(".word 0xe089a0bf @ strh r10, [r9], pc") + + TEST_PR( "ldrh r0, [r",0, 48,", -r",2, 24,"]") + TEST_PR( "ldrcsh r14, [r",13,0, ", r",12, 48,"]") + TEST_PR( "ldrh r1, [r",2, 24,", r",3, 48,"]!") + TEST_PR( "ldrcch r12, [r",11,48,", -r",10,24,"]!") + TEST_PR( "ldrh r2, [r",3, 24,"], r",4, 48,"") + TEST_PR( "ldrh r10, [r",9, 48,"], -r",11,24,"") + TEST_UNSUPPORTED(".word 0xe1bfc0ba @ ldrh r12, [pc, r10]!") + TEST_UNSUPPORTED(".word 0xe099f0bb @ ldrh pc, [r9], r11") + TEST_UNSUPPORTED(".word 0xe099a0bf @ ldrh r10, [r9], pc") + + TEST_RP( "strh r",0, VAL1,", [r",1, 24,", #-2]") + TEST_RP( "strmih r",14,VAL2,", [r",13,0, ", #2]") + TEST_RP( "strh r",1, VAL1,", [r",2, 24,", #4]!") + TEST_RP( "strplh r",12,VAL2,", [r",11,24,", #-4]!") + TEST_RP( "strh r",2, VAL1,", [r",3, 24,"], #48") + TEST_RP( "strh r",10,VAL2,", [r",9, 64,"], #-48") + TEST_UNSUPPORTED(".word 0xe1efc3b0 @ strh r12, [pc, #48]!") + TEST_UNSUPPORTED(".word 0xe0c9f3b0 @ strh pc, [r9], #48") + + TEST_P( "ldrh r0, [r",0, 24,", #-2]") + TEST_P( "ldrvsh r14, [r",13,0, ", #2]") + TEST_P( "ldrh r1, [r",2, 24,", #4]!") + TEST_P( "ldrvch r12, [r",11,24,", #-4]!") + TEST_P( "ldrh r2, [r",3, 24,"], #48") + TEST_P( "ldrh r10, [r",9, 64,"], #-48") + TEST( "ldrh r0, [pc, #0]") + TEST_UNSUPPORTED(".word 0xe1ffc3b0 @ ldrh r12, [pc, #48]!") + TEST_UNSUPPORTED(".word 0xe0d9f3b0 @ ldrh pc, [r9], #48") + + TEST_PR( "ldrsb r0, [r",0, 48,", -r",2, 24,"]") + TEST_PR( "ldrhisb r14, [r",13,0,", r",12, 48,"]") + TEST_PR( "ldrsb r1, [r",2, 24,", r",3, 48,"]!") + TEST_PR( "ldrlssb r12, [r",11,48,", -r",10,24,"]!") + TEST_PR( "ldrsb r2, [r",3, 24,"], r",4, 48,"") + TEST_PR( "ldrsb r10, [r",9, 48,"], -r",11,24,"") + TEST_UNSUPPORTED(".word 0xe1bfc0da @ ldrsb r12, [pc, r10]!") + TEST_UNSUPPORTED(".word 0xe099f0db @ ldrsb pc, [r9], r11") + + TEST_P( "ldrsb r0, [r",0, 24,", #-1]") + TEST_P( "ldrgesb r14, [r",13,0, ", #1]") + TEST_P( "ldrsb r1, [r",2, 24,", #4]!") + TEST_P( "ldrltsb r12, [r",11,24,", #-4]!") + TEST_P( "ldrsb r2, [r",3, 24,"], #48") + TEST_P( "ldrsb r10, [r",9, 64,"], #-48") + TEST( "ldrsb r0, [pc, #0]") + TEST_UNSUPPORTED(".word 0xe1ffc3d0 @ ldrsb r12, [pc, #48]!") + TEST_UNSUPPORTED(".word 0xe0d9f3d0 @ ldrsb pc, [r9], #48") + + TEST_PR( "ldrsh r0, [r",0, 48,", -r",2, 24,"]") + TEST_PR( "ldrgtsh r14, [r",13,0, ", r",12, 48,"]") + TEST_PR( "ldrsh r1, [r",2, 24,", r",3, 48,"]!") + TEST_PR( "ldrlesh r12, [r",11,48,", -r",10,24,"]!") + TEST_PR( "ldrsh r2, [r",3, 24,"], r",4, 48,"") + TEST_PR( "ldrsh r10, [r",9, 48,"], -r",11,24,"") + TEST_UNSUPPORTED(".word 0xe1bfc0fa @ ldrsh r12, [pc, r10]!") + TEST_UNSUPPORTED(".word 0xe099f0fb @ ldrsh pc, [r9], r11") + + TEST_P( "ldrsh r0, [r",0, 24,", #-1]") + TEST_P( "ldreqsh r14, [r",13,0 ,", #1]") + TEST_P( "ldrsh r1, [r",2, 24,", #4]!") + TEST_P( "ldrnesh r12, [r",11,24,", #-4]!") + TEST_P( "ldrsh r2, [r",3, 24,"], #48") + TEST_P( "ldrsh r10, [r",9, 64,"], #-48") + TEST( "ldrsh r0, [pc, #0]") + TEST_UNSUPPORTED(".word 0xe1ffc3f0 @ ldrsh r12, [pc, #48]!") + TEST_UNSUPPORTED(".word 0xe0d9f3f0 @ ldrsh pc, [r9], #48") + +#if __LINUX_ARM_ARCH__ >= 7 + TEST_UNSUPPORTED("strht r1, [r2], r3") + TEST_UNSUPPORTED("ldrht r1, [r2], r3") + TEST_UNSUPPORTED("strht r1, [r2], #48") + TEST_UNSUPPORTED("ldrht r1, [r2], #48") + TEST_UNSUPPORTED("ldrsbt r1, [r2], r3") + TEST_UNSUPPORTED("ldrsbt r1, [r2], #48") + TEST_UNSUPPORTED("ldrsht r1, [r2], r3") + TEST_UNSUPPORTED("ldrsht r1, [r2], #48") +#endif + + TEST_RPR( "strd r",0, VAL1,", [r",1, 48,", -r",2,24,"]") + TEST_RPR( "strccd r",8, VAL2,", [r",13,0, ", r",12,48,"]") + TEST_RPR( "strd r",4, VAL1,", [r",2, 24,", r",3, 48,"]!") + TEST_RPR( "strcsd r",12,VAL2,", [r",11,48,", -r",10,24,"]!") + TEST_RPR( "strd r",2, VAL1,", [r",3, 24,"], r",4,48,"") + TEST_RPR( "strd r",10,VAL2,", [r",9, 48,"], -r",7,24,"") + TEST_UNSUPPORTED(".word 0xe1afc0fa @ strd r12, [pc, r10]!") + + TEST_PR( "ldrd r0, [r",0, 48,", -r",2,24,"]") + TEST_PR( "ldrmid r8, [r",13,0, ", r",12,48,"]") + TEST_PR( "ldrd r4, [r",2, 24,", r",3, 48,"]!") + TEST_PR( "ldrpld r6, [r",11,48,", -r",10,24,"]!") + TEST_PR( "ldrd r2, [r",5, 24,"], r",4,48,"") + TEST_PR( "ldrd r10, [r",9,48,"], -r",7,24,"") + TEST_UNSUPPORTED(".word 0xe1afc0da @ ldrd r12, [pc, r10]!") + TEST_UNSUPPORTED(".word 0xe089f0db @ ldrd pc, [r9], r11") + TEST_UNSUPPORTED(".word 0xe089e0db @ ldrd lr, [r9], r11") + TEST_UNSUPPORTED(".word 0xe089c0df @ ldrd r12, [r9], pc") + + TEST_RP( "strd r",0, VAL1,", [r",1, 24,", #-8]") + TEST_RP( "strvsd r",8, VAL2,", [r",13,0, ", #8]") + TEST_RP( "strd r",4, VAL1,", [r",2, 24,", #16]!") + TEST_RP( "strvcd r",12,VAL2,", [r",11,24,", #-16]!") + TEST_RP( "strd r",2, VAL1,", [r",4, 24,"], #48") + TEST_RP( "strd r",10,VAL2,", [r",9, 64,"], #-48") + TEST_UNSUPPORTED(".word 0xe1efc3f0 @ strd r12, [pc, #48]!") + + TEST_P( "ldrd r0, [r",0, 24,", #-8]") + TEST_P( "ldrhid r8, [r",13,0, ", #8]") + TEST_P( "ldrd r4, [r",2, 24,", #16]!") + TEST_P( "ldrlsd r6, [r",11,24,", #-16]!") + TEST_P( "ldrd r2, [r",5, 24,"], #48") + TEST_P( "ldrd r10, [r",9,6,"], #-48") + TEST_UNSUPPORTED(".word 0xe1efc3d0 @ ldrd r12, [pc, #48]!") + TEST_UNSUPPORTED(".word 0xe0c9f3d0 @ ldrd pc, [r9], #48") + TEST_UNSUPPORTED(".word 0xe0c9e3d0 @ ldrd lr, [r9], #48") + + TEST_GROUP("Miscellaneous") + +#if __LINUX_ARM_ARCH__ >= 7 + TEST("movw r0, #0") + TEST("movw r0, #0xffff") + TEST("movw lr, #0xffff") + TEST_UNSUPPORTED(".word 0xe300f000 @ movw pc, #0") + TEST_R("movt r",0, VAL1,", #0") + TEST_R("movt r",0, VAL2,", #0xffff") + TEST_R("movt r",14,VAL1,", #0xffff") + TEST_UNSUPPORTED(".word 0xe340f000 @ movt pc, #0") +#endif + + TEST_UNSUPPORTED("msr cpsr, 0x13") + TEST_UNSUPPORTED("msr cpsr_f, 0xf0000000") + TEST_UNSUPPORTED("msr spsr, 0x13") + +#if __LINUX_ARM_ARCH__ >= 7 + TEST_SUPPORTED("yield") + TEST("sev") + TEST("nop") + TEST("wfi") + TEST_SUPPORTED("wfe") + TEST_UNSUPPORTED("dbg #0") +#endif + + TEST_GROUP("Load/store word and unsigned byte") + +#define LOAD_STORE(byte) \ + TEST_RP( "str"byte" r",0, VAL1,", [r",1, 24,", #-2]") \ + TEST_RP( "str"byte" r",14,VAL2,", [r",13,0, ", #2]") \ + TEST_RP( "str"byte" r",1, VAL1,", [r",2, 24,", #4]!") \ + TEST_RP( "str"byte" r",12,VAL2,", [r",11,24,", #-4]!") \ + TEST_RP( "str"byte" r",2, VAL1,", [r",3, 24,"], #48") \ + TEST_RP( "str"byte" r",10,VAL2,", [r",9, 64,"], #-48") \ + TEST_RPR("str"byte" r",0, VAL1,", [r",1, 48,", -r",2, 24,"]") \ + TEST_RPR("str"byte" r",14,VAL2,", [r",13,0, ", r",12, 48,"]") \ + TEST_RPR("str"byte" r",1, VAL1,", [r",2, 24,", r",3, 48,"]!") \ + TEST_RPR("str"byte" r",12,VAL2,", [r",11,48,", -r",10,24,"]!") \ + TEST_RPR("str"byte" r",2, VAL1,", [r",3, 24,"], r",4, 48,"") \ + TEST_RPR("str"byte" r",10,VAL2,", [r",9, 48,"], -r",11,24,"") \ + TEST_RPR("str"byte" r",0, VAL1,", [r",1, 24,", r",2, 32,", asl #1]")\ + TEST_RPR("str"byte" r",14,VAL2,", [r",13,0, ", r",12, 32,", lsr #2]")\ + TEST_RPR("str"byte" r",1, VAL1,", [r",2, 24,", r",3, 32,", asr #3]!")\ + TEST_RPR("str"byte" r",12,VAL2,", [r",11,24,", r",10, 4,", ror #31]!")\ + TEST_P( "ldr"byte" r0, [r",0, 24,", #-2]") \ + TEST_P( "ldr"byte" r14, [r",13,0, ", #2]") \ + TEST_P( "ldr"byte" r1, [r",2, 24,", #4]!") \ + TEST_P( "ldr"byte" r12, [r",11,24,", #-4]!") \ + TEST_P( "ldr"byte" r2, [r",3, 24,"], #48") \ + TEST_P( "ldr"byte" r10, [r",9, 64,"], #-48") \ + TEST_PR( "ldr"byte" r0, [r",0, 48,", -r",2, 24,"]") \ + TEST_PR( "ldr"byte" r14, [r",13,0, ", r",12, 48,"]") \ + TEST_PR( "ldr"byte" r1, [r",2, 24,", r",3, 48,"]!") \ + TEST_PR( "ldr"byte" r12, [r",11,48,", -r",10,24,"]!") \ + TEST_PR( "ldr"byte" r2, [r",3, 24,"], r",4, 48,"") \ + TEST_PR( "ldr"byte" r10, [r",9, 48,"], -r",11,24,"") \ + TEST_PR( "ldr"byte" r0, [r",0, 24,", r",2, 32,", asl #1]") \ + TEST_PR( "ldr"byte" r14, [r",13,0, ", r",12, 32,", lsr #2]") \ + TEST_PR( "ldr"byte" r1, [r",2, 24,", r",3, 32,", asr #3]!") \ + TEST_PR( "ldr"byte" r12, [r",11,24,", r",10, 4,", ror #31]!") \ + TEST( "ldr"byte" r0, [pc, #0]") \ + TEST_R( "ldr"byte" r12, [pc, r",14,0,"]") + + LOAD_STORE("") + TEST_P( "str pc, [r",0,0,", #15*4]") + TEST_R( "str pc, [sp, r",2,15*4,"]") + TEST_BF( "ldr pc, [sp, #15*4]") + TEST_BF_R("ldr pc, [sp, r",2,15*4,"]") + + TEST_P( "str sp, [r",0,0,", #13*4]") + TEST_R( "str sp, [sp, r",2,13*4,"]") + TEST_BF( "ldr sp, [sp, #13*4]") + TEST_BF_R("ldr sp, [sp, r",2,13*4,"]") + +#ifdef CONFIG_THUMB2_KERNEL + TEST_ARM_TO_THUMB_INTERWORK_P("ldr pc, [r",0,0,", #15*4]") +#endif + TEST_UNSUPPORTED(".word 0xe5af6008 @ str r6, [pc, #8]!") + TEST_UNSUPPORTED(".word 0xe7af6008 @ str r6, [pc, r8]!") + TEST_UNSUPPORTED(".word 0xe5bf6008 @ ldr r6, [pc, #8]!") + TEST_UNSUPPORTED(".word 0xe7bf6008 @ ldr r6, [pc, r8]!") + TEST_UNSUPPORTED(".word 0xe788600f @ str r6, [r8, pc]") + TEST_UNSUPPORTED(".word 0xe798600f @ ldr r6, [r8, pc]") + + LOAD_STORE("b") + TEST_UNSUPPORTED(".word 0xe5f7f008 @ ldrb pc, [r7, #8]!") + TEST_UNSUPPORTED(".word 0xe7f7f008 @ ldrb pc, [r7, r8]!") + TEST_UNSUPPORTED(".word 0xe5ef6008 @ strb r6, [pc, #8]!") + TEST_UNSUPPORTED(".word 0xe7ef6008 @ strb r6, [pc, r3]!") + TEST_UNSUPPORTED(".word 0xe5ff6008 @ ldrb r6, [pc, #8]!") + TEST_UNSUPPORTED(".word 0xe7ff6008 @ ldrb r6, [pc, r3]!") + + TEST_UNSUPPORTED("ldrt r0, [r1], #4") + TEST_UNSUPPORTED("ldrt r1, [r2], r3") + TEST_UNSUPPORTED("strt r2, [r3], #4") + TEST_UNSUPPORTED("strt r3, [r4], r5") + TEST_UNSUPPORTED("ldrbt r4, [r5], #4") + TEST_UNSUPPORTED("ldrbt r5, [r6], r7") + TEST_UNSUPPORTED("strbt r6, [r7], #4") + TEST_UNSUPPORTED("strbt r7, [r8], r9") + +#if __LINUX_ARM_ARCH__ >= 7 + TEST_GROUP("Parallel addition and subtraction, signed") + + TEST_UNSUPPORTED(".word 0xe6000010") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe60fffff") /* Unallocated space */ + + TEST_RR( "sadd16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "sadd16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe61cff1a @ sadd16 pc, r12, r10") + TEST_RR( "sasx r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "sasx r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe61cff3a @ sasx pc, r12, r10") + TEST_RR( "ssax r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "ssax r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe61cff5a @ ssax pc, r12, r10") + TEST_RR( "ssub16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "ssub16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe61cff7a @ ssub16 pc, r12, r10") + TEST_RR( "sadd8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "sadd8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe61cff9a @ sadd8 pc, r12, r10") + TEST_UNSUPPORTED(".word 0xe61000b0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe61fffbf") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe61000d0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe61fffdf") /* Unallocated space */ + TEST_RR( "ssub8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "ssub8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe61cfffa @ ssub8 pc, r12, r10") + + TEST_RR( "qadd16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "qadd16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe62cff1a @ qadd16 pc, r12, r10") + TEST_RR( "qasx r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "qasx r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe62cff3a @ qasx pc, r12, r10") + TEST_RR( "qsax r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "qsax r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe62cff5a @ qsax pc, r12, r10") + TEST_RR( "qsub16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "qsub16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe62cff7a @ qsub16 pc, r12, r10") + TEST_RR( "qadd8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "qadd8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe62cff9a @ qadd8 pc, r12, r10") + TEST_UNSUPPORTED(".word 0xe62000b0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe62fffbf") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe62000d0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe62fffdf") /* Unallocated space */ + TEST_RR( "qsub8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "qsub8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe62cfffa @ qsub8 pc, r12, r10") + + TEST_RR( "shadd16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "shadd16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe63cff1a @ shadd16 pc, r12, r10") + TEST_RR( "shasx r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "shasx r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe63cff3a @ shasx pc, r12, r10") + TEST_RR( "shsax r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "shsax r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe63cff5a @ shsax pc, r12, r10") + TEST_RR( "shsub16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "shsub16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe63cff7a @ shsub16 pc, r12, r10") + TEST_RR( "shadd8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "shadd8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe63cff9a @ shadd8 pc, r12, r10") + TEST_UNSUPPORTED(".word 0xe63000b0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe63fffbf") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe63000d0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe63fffdf") /* Unallocated space */ + TEST_RR( "shsub8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "shsub8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe63cfffa @ shsub8 pc, r12, r10") + + TEST_GROUP("Parallel addition and subtraction, unsigned") + + TEST_UNSUPPORTED(".word 0xe6400010") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe64fffff") /* Unallocated space */ + + TEST_RR( "uadd16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uadd16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe65cff1a @ uadd16 pc, r12, r10") + TEST_RR( "uasx r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uasx r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe65cff3a @ uasx pc, r12, r10") + TEST_RR( "usax r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "usax r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe65cff5a @ usax pc, r12, r10") + TEST_RR( "usub16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "usub16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe65cff7a @ usub16 pc, r12, r10") + TEST_RR( "uadd8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uadd8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe65cff9a @ uadd8 pc, r12, r10") + TEST_UNSUPPORTED(".word 0xe65000b0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe65fffbf") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe65000d0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe65fffdf") /* Unallocated space */ + TEST_RR( "usub8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "usub8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe65cfffa @ usub8 pc, r12, r10") + + TEST_RR( "uqadd16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uqadd16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe66cff1a @ uqadd16 pc, r12, r10") + TEST_RR( "uqasx r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uqasx r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe66cff3a @ uqasx pc, r12, r10") + TEST_RR( "uqsax r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uqsax r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe66cff5a @ uqsax pc, r12, r10") + TEST_RR( "uqsub16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uqsub16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe66cff7a @ uqsub16 pc, r12, r10") + TEST_RR( "uqadd8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uqadd8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe66cff9a @ uqadd8 pc, r12, r10") + TEST_UNSUPPORTED(".word 0xe66000b0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe66fffbf") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe66000d0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe66fffdf") /* Unallocated space */ + TEST_RR( "uqsub8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uqsub8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe66cfffa @ uqsub8 pc, r12, r10") + + TEST_RR( "uhadd16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uhadd16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe67cff1a @ uhadd16 pc, r12, r10") + TEST_RR( "uhasx r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uhasx r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe67cff3a @ uhasx pc, r12, r10") + TEST_RR( "uhsax r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uhsax r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe67cff5a @ uhsax pc, r12, r10") + TEST_RR( "uhsub16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uhsub16 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe67cff7a @ uhsub16 pc, r12, r10") + TEST_RR( "uhadd8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uhadd8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe67cff9a @ uhadd8 pc, r12, r10") + TEST_UNSUPPORTED(".word 0xe67000b0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe67fffbf") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe67000d0") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe67fffdf") /* Unallocated space */ + TEST_RR( "uhsub8 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uhsub8 r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe67cfffa @ uhsub8 pc, r12, r10") + TEST_UNSUPPORTED(".word 0xe67feffa @ uhsub8 r14, pc, r10") + TEST_UNSUPPORTED(".word 0xe67cefff @ uhsub8 r14, r12, pc") +#endif /* __LINUX_ARM_ARCH__ >= 7 */ + +#if __LINUX_ARM_ARCH__ >= 6 + TEST_GROUP("Packing, unpacking, saturation, and reversal") + + TEST_RR( "pkhbt r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "pkhbt r14,r",12, HH1,", r",10,HH2,", lsl #2") + TEST_UNSUPPORTED(".word 0xe68cf11a @ pkhbt pc, r12, r10, lsl #2") + TEST_RR( "pkhtb r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "pkhtb r14,r",12, HH1,", r",10,HH2,", asr #2") + TEST_UNSUPPORTED(".word 0xe68cf15a @ pkhtb pc, r12, r10, asr #2") + TEST_UNSUPPORTED(".word 0xe68fe15a @ pkhtb r14, pc, r10, asr #2") + TEST_UNSUPPORTED(".word 0xe68ce15f @ pkhtb r14, r12, pc, asr #2") + TEST_UNSUPPORTED(".word 0xe6900010") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe69fffdf") /* Unallocated space */ + + TEST_R( "ssat r0, #24, r",0, VAL1,"") + TEST_R( "ssat r14, #24, r",12, VAL2,"") + TEST_R( "ssat r0, #24, r",0, VAL1,", lsl #8") + TEST_R( "ssat r14, #24, r",12, VAL2,", asr #8") + TEST_UNSUPPORTED(".word 0xe6b7f01c @ ssat pc, #24, r12") + + TEST_R( "usat r0, #24, r",0, VAL1,"") + TEST_R( "usat r14, #24, r",12, VAL2,"") + TEST_R( "usat r0, #24, r",0, VAL1,", lsl #8") + TEST_R( "usat r14, #24, r",12, VAL2,", asr #8") + TEST_UNSUPPORTED(".word 0xe6f7f01c @ usat pc, #24, r12") + + TEST_RR( "sxtab16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "sxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "sxtb16 r8, r",7, HH1,"") + TEST_UNSUPPORTED(".word 0xe68cf47a @ sxtab16 pc,r12, r10, ror #8") + + TEST_RR( "sel r0, r",0, VAL1,", r",1, VAL2,"") + TEST_RR( "sel r14, r",12,VAL1,", r",10, VAL2,"") + TEST_UNSUPPORTED(".word 0xe68cffba @ sel pc, r12, r10") + TEST_UNSUPPORTED(".word 0xe68fefba @ sel r14, pc, r10") + TEST_UNSUPPORTED(".word 0xe68cefbf @ sel r14, r12, pc") + + TEST_R( "ssat16 r0, #12, r",0, HH1,"") + TEST_R( "ssat16 r14, #12, r",12, HH2,"") + TEST_UNSUPPORTED(".word 0xe6abff3c @ ssat16 pc, #12, r12") + + TEST_RR( "sxtab r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "sxtab r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "sxtb r8, r",7, HH1,"") + TEST_UNSUPPORTED(".word 0xe6acf47a @ sxtab pc,r12, r10, ror #8") + + TEST_R( "rev r0, r",0, VAL1,"") + TEST_R( "rev r14, r",12, VAL2,"") + TEST_UNSUPPORTED(".word 0xe6bfff3c @ rev pc, r12") + + TEST_RR( "sxtah r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "sxtah r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "sxth r8, r",7, HH1,"") + TEST_UNSUPPORTED(".word 0xe6bcf47a @ sxtah pc,r12, r10, ror #8") + + TEST_R( "rev16 r0, r",0, VAL1,"") + TEST_R( "rev16 r14, r",12, VAL2,"") + TEST_UNSUPPORTED(".word 0xe6bfffbc @ rev16 pc, r12") + + TEST_RR( "uxtab16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "uxtb16 r8, r",7, HH1,"") + TEST_UNSUPPORTED(".word 0xe6ccf47a @ uxtab16 pc,r12, r10, ror #8") + + TEST_R( "usat16 r0, #12, r",0, HH1,"") + TEST_R( "usat16 r14, #12, r",12, HH2,"") + TEST_UNSUPPORTED(".word 0xe6ecff3c @ usat16 pc, #12, r12") + TEST_UNSUPPORTED(".word 0xe6ecef3f @ usat16 r14, #12, pc") + + TEST_RR( "uxtab r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uxtab r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "uxtb r8, r",7, HH1,"") + TEST_UNSUPPORTED(".word 0xe6ecf47a @ uxtab pc,r12, r10, ror #8") + +#if __LINUX_ARM_ARCH__ >= 7 + TEST_R( "rbit r0, r",0, VAL1,"") + TEST_R( "rbit r14, r",12, VAL2,"") + TEST_UNSUPPORTED(".word 0xe6ffff3c @ rbit pc, r12") +#endif + + TEST_RR( "uxtah r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uxtah r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "uxth r8, r",7, HH1,"") + TEST_UNSUPPORTED(".word 0xe6fff077 @ uxth pc, r7") + TEST_UNSUPPORTED(".word 0xe6ff807f @ uxth r8, pc") + TEST_UNSUPPORTED(".word 0xe6fcf47a @ uxtah pc, r12, r10, ror #8") + TEST_UNSUPPORTED(".word 0xe6fce47f @ uxtah r14, r12, pc, ror #8") + + TEST_R( "revsh r0, r",0, VAL1,"") + TEST_R( "revsh r14, r",12, VAL2,"") + TEST_UNSUPPORTED(".word 0xe6ffff3c @ revsh pc, r12") + TEST_UNSUPPORTED(".word 0xe6ffef3f @ revsh r14, pc") + + TEST_UNSUPPORTED(".word 0xe6900070") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe69fff7f") /* Unallocated space */ + + TEST_UNSUPPORTED(".word 0xe6d00070") /* Unallocated space */ + TEST_UNSUPPORTED(".word 0xe6dfff7f") /* Unallocated space */ +#endif /* __LINUX_ARM_ARCH__ >= 6 */ + +#if __LINUX_ARM_ARCH__ >= 6 + TEST_GROUP("Signed multiplies") + + TEST_RRR( "smlad r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"") + TEST_RRR( "smlad r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"") + TEST_UNSUPPORTED(".word 0xe70f8a1c @ smlad pc, r12, r10, r8") + TEST_RRR( "smladx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"") + TEST_RRR( "smladx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"") + TEST_UNSUPPORTED(".word 0xe70f8a3c @ smladx pc, r12, r10, r8") + + TEST_RR( "smuad r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "smuad r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe70ffa1c @ smuad pc, r12, r10") + TEST_RR( "smuadx r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "smuadx r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe70ffa3c @ smuadx pc, r12, r10") + + TEST_RRR( "smlsd r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"") + TEST_RRR( "smlsd r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"") + TEST_UNSUPPORTED(".word 0xe70f8a5c @ smlsd pc, r12, r10, r8") + TEST_RRR( "smlsdx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"") + TEST_RRR( "smlsdx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"") + TEST_UNSUPPORTED(".word 0xe70f8a7c @ smlsdx pc, r12, r10, r8") + + TEST_RR( "smusd r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "smusd r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe70ffa5c @ smusd pc, r12, r10") + TEST_RR( "smusdx r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "smusdx r14, r",12,HH2,", r",10,HH1,"") + TEST_UNSUPPORTED(".word 0xe70ffa7c @ smusdx pc, r12, r10") + + TEST_RRRR( "smlald r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2) + TEST_RRRR( "smlald r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1) + TEST_UNSUPPORTED(".word 0xe74af819 @ smlald pc, r10, r9, r8") + TEST_UNSUPPORTED(".word 0xe74fb819 @ smlald r11, pc, r9, r8") + TEST_UNSUPPORTED(".word 0xe74ab81f @ smlald r11, r10, pc, r8") + TEST_UNSUPPORTED(".word 0xe74abf19 @ smlald r11, r10, r9, pc") + + TEST_RRRR( "smlaldx r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2) + TEST_RRRR( "smlaldx r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1) + TEST_UNSUPPORTED(".word 0xe74af839 @ smlaldx pc, r10, r9, r8") + TEST_UNSUPPORTED(".word 0xe74fb839 @ smlaldx r11, pc, r9, r8") + + TEST_RRR( "smmla r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"") + TEST_RRR( "smmla r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"") + TEST_UNSUPPORTED(".word 0xe75f8a1c @ smmla pc, r12, r10, r8") + TEST_RRR( "smmlar r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"") + TEST_RRR( "smmlar r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"") + TEST_UNSUPPORTED(".word 0xe75f8a3c @ smmlar pc, r12, r10, r8") + + TEST_RR( "smmul r0, r",0, VAL1,", r",1, VAL2,"") + TEST_RR( "smmul r14, r",12,VAL2,", r",10,VAL1,"") + TEST_UNSUPPORTED(".word 0xe75ffa1c @ smmul pc, r12, r10") + TEST_RR( "smmulr r0, r",0, VAL1,", r",1, VAL2,"") + TEST_RR( "smmulr r14, r",12,VAL2,", r",10,VAL1,"") + TEST_UNSUPPORTED(".word 0xe75ffa3c @ smmulr pc, r12, r10") + + TEST_RRR( "smmls r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"") + TEST_RRR( "smmls r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"") + TEST_UNSUPPORTED(".word 0xe75f8adc @ smmls pc, r12, r10, r8") + TEST_RRR( "smmlsr r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"") + TEST_RRR( "smmlsr r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"") + TEST_UNSUPPORTED(".word 0xe75f8afc @ smmlsr pc, r12, r10, r8") + TEST_UNSUPPORTED(".word 0xe75e8aff @ smmlsr r14, pc, r10, r8") + TEST_UNSUPPORTED(".word 0xe75e8ffc @ smmlsr r14, r12, pc, r8") + TEST_UNSUPPORTED(".word 0xe75efafc @ smmlsr r14, r12, r10, pc") + + TEST_RR( "usad8 r0, r",0, VAL1,", r",1, VAL2,"") + TEST_RR( "usad8 r14, r",12,VAL2,", r",10,VAL1,"") + TEST_UNSUPPORTED(".word 0xe75ffa1c @ usad8 pc, r12, r10") + TEST_UNSUPPORTED(".word 0xe75efa1f @ usad8 r14, pc, r10") + TEST_UNSUPPORTED(".word 0xe75eff1c @ usad8 r14, r12, pc") + + TEST_RRR( "usada8 r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL3,"") + TEST_RRR( "usada8 r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL3,"") + TEST_UNSUPPORTED(".word 0xe78f8a1c @ usada8 pc, r12, r10, r8") + TEST_UNSUPPORTED(".word 0xe78e8a1f @ usada8 r14, pc, r10, r8") + TEST_UNSUPPORTED(".word 0xe78e8f1c @ usada8 r14, r12, pc, r8") +#endif /* __LINUX_ARM_ARCH__ >= 6 */ + +#if __LINUX_ARM_ARCH__ >= 7 + TEST_GROUP("Bit Field") + + TEST_R( "sbfx r0, r",0 , VAL1,", #0, #31") + TEST_R( "sbfxeq r14, r",12, VAL2,", #8, #16") + TEST_R( "sbfx r4, r",10, VAL1,", #16, #15") + TEST_UNSUPPORTED(".word 0xe7aff45c @ sbfx pc, r12, #8, #16") + + TEST_R( "ubfx r0, r",0 , VAL1,", #0, #31") + TEST_R( "ubfxcs r14, r",12, VAL2,", #8, #16") + TEST_R( "ubfx r4, r",10, VAL1,", #16, #15") + TEST_UNSUPPORTED(".word 0xe7eff45c @ ubfx pc, r12, #8, #16") + TEST_UNSUPPORTED(".word 0xe7efc45f @ ubfx r12, pc, #8, #16") + + TEST_R( "bfc r",0, VAL1,", #4, #20") + TEST_R( "bfcvs r",14,VAL2,", #4, #20") + TEST_R( "bfc r",7, VAL1,", #0, #31") + TEST_R( "bfc r",8, VAL2,", #0, #31") + TEST_UNSUPPORTED(".word 0xe7def01f @ bfc pc, #0, #31"); + + TEST_RR( "bfi r",0, VAL1,", r",0 , VAL2,", #0, #31") + TEST_RR( "bfipl r",12,VAL1,", r",14 , VAL2,", #4, #20") + TEST_UNSUPPORTED(".word 0xe7d7f21e @ bfi pc, r14, #4, #20") + + TEST_UNSUPPORTED(".word 0x07f000f0") /* Permanently UNDEFINED */ + TEST_UNSUPPORTED(".word 0x07ffffff") /* Permanently UNDEFINED */ +#endif /* __LINUX_ARM_ARCH__ >= 6 */ + + TEST_GROUP("Branch, branch with link, and block data transfer") + + TEST_P( "stmda r",0, 16*4,", {r0}") + TEST_P( "stmeqda r",4, 16*4,", {r0-r15}") + TEST_P( "stmneda r",8, 16*4,"!, {r8-r15}") + TEST_P( "stmda r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + TEST_P( "stmda r",13,0, "!, {pc}") + + TEST_P( "ldmda r",0, 16*4,", {r0}") + TEST_BF_P("ldmcsda r",4, 15*4,", {r0-r15}") + TEST_BF_P("ldmccda r",7, 15*4,"!, {r8-r15}") + TEST_P( "ldmda r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + TEST_BF_P("ldmda r",14,15*4,"!, {pc}") + + TEST_P( "stmia r",0, 16*4,", {r0}") + TEST_P( "stmmiia r",4, 16*4,", {r0-r15}") + TEST_P( "stmplia r",8, 16*4,"!, {r8-r15}") + TEST_P( "stmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + TEST_P( "stmia r",14,0, "!, {pc}") + + TEST_P( "ldmia r",0, 16*4,", {r0}") + TEST_BF_P("ldmvsia r",4, 0, ", {r0-r15}") + TEST_BF_P("ldmvcia r",7, 8*4, "!, {r8-r15}") + TEST_P( "ldmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + TEST_BF_P("ldmia r",14,15*4,"!, {pc}") + + TEST_P( "stmdb r",0, 16*4,", {r0}") + TEST_P( "stmhidb r",4, 16*4,", {r0-r15}") + TEST_P( "stmlsdb r",8, 16*4,"!, {r8-r15}") + TEST_P( "stmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + TEST_P( "stmdb r",13,4, "!, {pc}") + + TEST_P( "ldmdb r",0, 16*4,", {r0}") + TEST_BF_P("ldmgedb r",4, 16*4,", {r0-r15}") + TEST_BF_P("ldmltdb r",7, 16*4,"!, {r8-r15}") + TEST_P( "ldmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + TEST_BF_P("ldmdb r",14,16*4,"!, {pc}") + + TEST_P( "stmib r",0, 16*4,", {r0}") + TEST_P( "stmgtib r",4, 16*4,", {r0-r15}") + TEST_P( "stmleib r",8, 16*4,"!, {r8-r15}") + TEST_P( "stmib r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + TEST_P( "stmib r",13,-4, "!, {pc}") + + TEST_P( "ldmib r",0, 16*4,", {r0}") + TEST_BF_P("ldmeqib r",4, -4,", {r0-r15}") + TEST_BF_P("ldmneib r",7, 7*4,"!, {r8-r15}") + TEST_P( "ldmib r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + TEST_BF_P("ldmib r",14,14*4,"!, {pc}") + + TEST_P( "stmdb r",13,16*4,"!, {r3-r12,lr}") + TEST_P( "stmeqdb r",13,16*4,"!, {r3-r12}") + TEST_P( "stmnedb r",2, 16*4,", {r3-r12,lr}") + TEST_P( "stmdb r",13,16*4,"!, {r2-r12,lr}") + TEST_P( "stmdb r",0, 16*4,", {r0-r12}") + TEST_P( "stmdb r",0, 16*4,", {r0-r12,lr}") + + TEST_BF_P("ldmia r",13,5*4, "!, {r3-r12,pc}") + TEST_P( "ldmccia r",13,5*4, "!, {r3-r12}") + TEST_BF_P("ldmcsia r",2, 5*4, "!, {r3-r12,pc}") + TEST_BF_P("ldmia r",13,4*4, "!, {r2-r12,pc}") + TEST_P( "ldmia r",0, 16*4,", {r0-r12}") + TEST_P( "ldmia r",0, 16*4,", {r0-r12,lr}") + +#ifdef CONFIG_THUMB2_KERNEL + TEST_ARM_TO_THUMB_INTERWORK_P("ldmplia r",0,15*4,", {pc}") + TEST_ARM_TO_THUMB_INTERWORK_P("ldmmiia r",13,0,", {r0-r15}") +#endif + TEST_BF("b 2f") + TEST_BF("bl 2f") + TEST_BB("b 2b") + TEST_BB("bl 2b") + + TEST_BF("beq 2f") + TEST_BF("bleq 2f") + TEST_BB("bne 2b") + TEST_BB("blne 2b") + + TEST_BF("bgt 2f") + TEST_BF("blgt 2f") + TEST_BB("blt 2b") + TEST_BB("bllt 2b") + + TEST_GROUP("Supervisor Call, and coprocessor instructions") + + /* + * We can't really test these by executing them, so all + * we can do is check that probes are, or are not allowed. + * At the moment none are allowed... + */ +#define TEST_COPROCESSOR(code) TEST_UNSUPPORTED(code) + +#define COPROCESSOR_INSTRUCTIONS_ST_LD(two,cc) \ + TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #4]") \ + TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #-4]") \ + TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #4]!") \ + TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #-4]!") \ + TEST_COPROCESSOR("stc"two" 0, cr0, [r13], #4") \ + TEST_COPROCESSOR("stc"two" 0, cr0, [r13], #-4") \ + TEST_COPROCESSOR("stc"two" 0, cr0, [r13], {1}") \ + TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #4]") \ + TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #-4]") \ + TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #4]!") \ + TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #-4]!") \ + TEST_COPROCESSOR("stc"two"l 0, cr0, [r13], #4") \ + TEST_COPROCESSOR("stc"two"l 0, cr0, [r13], #-4") \ + TEST_COPROCESSOR("stc"two"l 0, cr0, [r13], {1}") \ + TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #4]") \ + TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #-4]") \ + TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #4]!") \ + TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #-4]!") \ + TEST_COPROCESSOR("ldc"two" 0, cr0, [r13], #4") \ + TEST_COPROCESSOR("ldc"two" 0, cr0, [r13], #-4") \ + TEST_COPROCESSOR("ldc"two" 0, cr0, [r13], {1}") \ + TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #4]") \ + TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #-4]") \ + TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #4]!") \ + TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #-4]!") \ + TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13], #4") \ + TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13], #-4") \ + TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13], {1}") \ + \ + TEST_COPROCESSOR( "stc"two" 0, cr0, [r15, #4]") \ + TEST_COPROCESSOR( "stc"two" 0, cr0, [r15, #-4]") \ + TEST_UNSUPPORTED(".word 0x"cc"daf0001 @ stc"two" 0, cr0, [r15, #4]!") \ + TEST_UNSUPPORTED(".word 0x"cc"d2f0001 @ stc"two" 0, cr0, [r15, #-4]!") \ + TEST_UNSUPPORTED(".word 0x"cc"caf0001 @ stc"two" 0, cr0, [r15], #4") \ + TEST_UNSUPPORTED(".word 0x"cc"c2f0001 @ stc"two" 0, cr0, [r15], #-4") \ + TEST_COPROCESSOR( "stc"two" 0, cr0, [r15], {1}") \ + TEST_COPROCESSOR( "stc"two"l 0, cr0, [r15, #4]") \ + TEST_COPROCESSOR( "stc"two"l 0, cr0, [r15, #-4]") \ + TEST_UNSUPPORTED(".word 0x"cc"def0001 @ stc"two"l 0, cr0, [r15, #4]!") \ + TEST_UNSUPPORTED(".word 0x"cc"d6f0001 @ stc"two"l 0, cr0, [r15, #-4]!") \ + TEST_UNSUPPORTED(".word 0x"cc"cef0001 @ stc"two"l 0, cr0, [r15], #4") \ + TEST_UNSUPPORTED(".word 0x"cc"c6f0001 @ stc"two"l 0, cr0, [r15], #-4") \ + TEST_COPROCESSOR( "stc"two"l 0, cr0, [r15], {1}") \ + TEST_COPROCESSOR( "ldc"two" 0, cr0, [r15, #4]") \ + TEST_COPROCESSOR( "ldc"two" 0, cr0, [r15, #-4]") \ + TEST_UNSUPPORTED(".word 0x"cc"dbf0001 @ ldc"two" 0, cr0, [r15, #4]!") \ + TEST_UNSUPPORTED(".word 0x"cc"d3f0001 @ ldc"two" 0, cr0, [r15, #-4]!") \ + TEST_UNSUPPORTED(".word 0x"cc"cbf0001 @ ldc"two" 0, cr0, [r15], #4") \ + TEST_UNSUPPORTED(".word 0x"cc"c3f0001 @ ldc"two" 0, cr0, [r15], #-4") \ + TEST_COPROCESSOR( "ldc"two" 0, cr0, [r15], {1}") \ + TEST_COPROCESSOR( "ldc"two"l 0, cr0, [r15, #4]") \ + TEST_COPROCESSOR( "ldc"two"l 0, cr0, [r15, #-4]") \ + TEST_UNSUPPORTED(".word 0x"cc"dff0001 @ ldc"two"l 0, cr0, [r15, #4]!") \ + TEST_UNSUPPORTED(".word 0x"cc"d7f0001 @ ldc"two"l 0, cr0, [r15, #-4]!") \ + TEST_UNSUPPORTED(".word 0x"cc"cff0001 @ ldc"two"l 0, cr0, [r15], #4") \ + TEST_UNSUPPORTED(".word 0x"cc"c7f0001 @ ldc"two"l 0, cr0, [r15], #-4") \ + TEST_COPROCESSOR( "ldc"two"l 0, cr0, [r15], {1}") + +#define COPROCESSOR_INSTRUCTIONS_MC_MR(two,cc) \ + \ + TEST_COPROCESSOR( "mcrr"two" 0, 15, r0, r14, cr0") \ + TEST_COPROCESSOR( "mcrr"two" 15, 0, r14, r0, cr15") \ + TEST_UNSUPPORTED(".word 0x"cc"c4f00f0 @ mcrr"two" 0, 15, r0, r15, cr0") \ + TEST_UNSUPPORTED(".word 0x"cc"c40ff0f @ mcrr"two" 15, 0, r15, r0, cr15") \ + TEST_COPROCESSOR( "mrrc"two" 0, 15, r0, r14, cr0") \ + TEST_COPROCESSOR( "mrrc"two" 15, 0, r14, r0, cr15") \ + TEST_UNSUPPORTED(".word 0x"cc"c5f00f0 @ mrrc"two" 0, 15, r0, r15, cr0") \ + TEST_UNSUPPORTED(".word 0x"cc"c50ff0f @ mrrc"two" 15, 0, r15, r0, cr15") \ + TEST_COPROCESSOR( "cdp"two" 15, 15, cr15, cr15, cr15, 7") \ + TEST_COPROCESSOR( "cdp"two" 0, 0, cr0, cr0, cr0, 0") \ + TEST_COPROCESSOR( "mcr"two" 15, 7, r15, cr15, cr15, 7") \ + TEST_COPROCESSOR( "mcr"two" 0, 0, r0, cr0, cr0, 0") \ + TEST_COPROCESSOR( "mrc"two" 15, 7, r15, cr15, cr15, 7") \ + TEST_COPROCESSOR( "mrc"two" 0, 0, r0, cr0, cr0, 0") + + COPROCESSOR_INSTRUCTIONS_ST_LD("","e") + COPROCESSOR_INSTRUCTIONS_MC_MR("","e") + TEST_UNSUPPORTED("svc 0") + TEST_UNSUPPORTED("svc 0xffffff") + + TEST_UNSUPPORTED("svc 0") + + TEST_GROUP("Unconditional instruction") + +#if __LINUX_ARM_ARCH__ >= 6 + TEST_UNSUPPORTED("srsda sp, 0x13") + TEST_UNSUPPORTED("srsdb sp, 0x13") + TEST_UNSUPPORTED("srsia sp, 0x13") + TEST_UNSUPPORTED("srsib sp, 0x13") + TEST_UNSUPPORTED("srsda sp!, 0x13") + TEST_UNSUPPORTED("srsdb sp!, 0x13") + TEST_UNSUPPORTED("srsia sp!, 0x13") + TEST_UNSUPPORTED("srsib sp!, 0x13") + + TEST_UNSUPPORTED("rfeda sp") + TEST_UNSUPPORTED("rfedb sp") + TEST_UNSUPPORTED("rfeia sp") + TEST_UNSUPPORTED("rfeib sp") + TEST_UNSUPPORTED("rfeda sp!") + TEST_UNSUPPORTED("rfedb sp!") + TEST_UNSUPPORTED("rfeia sp!") + TEST_UNSUPPORTED("rfeib sp!") + TEST_UNSUPPORTED(".word 0xf81d0a00 @ rfeda pc") + TEST_UNSUPPORTED(".word 0xf91d0a00 @ rfedb pc") + TEST_UNSUPPORTED(".word 0xf89d0a00 @ rfeia pc") + TEST_UNSUPPORTED(".word 0xf99d0a00 @ rfeib pc") + TEST_UNSUPPORTED(".word 0xf83d0a00 @ rfeda pc!") + TEST_UNSUPPORTED(".word 0xf93d0a00 @ rfedb pc!") + TEST_UNSUPPORTED(".word 0xf8bd0a00 @ rfeia pc!") + TEST_UNSUPPORTED(".word 0xf9bd0a00 @ rfeib pc!") +#endif /* __LINUX_ARM_ARCH__ >= 6 */ + +#if __LINUX_ARM_ARCH__ >= 6 + TEST_X( "blx __dummy_thumb_subroutine_even", + ".thumb \n\t" + ".space 4 \n\t" + ".type __dummy_thumb_subroutine_even, %%function \n\t" + "__dummy_thumb_subroutine_even: \n\t" + "mov r0, pc \n\t" + "bx lr \n\t" + ".arm \n\t" + ) + TEST( "blx __dummy_thumb_subroutine_even") + + TEST_X( "blx __dummy_thumb_subroutine_odd", + ".thumb \n\t" + ".space 2 \n\t" + ".type __dummy_thumb_subroutine_odd, %%function \n\t" + "__dummy_thumb_subroutine_odd: \n\t" + "mov r0, pc \n\t" + "bx lr \n\t" + ".arm \n\t" + ) + TEST( "blx __dummy_thumb_subroutine_odd") +#endif /* __LINUX_ARM_ARCH__ >= 6 */ + + COPROCESSOR_INSTRUCTIONS_ST_LD("2","f") +#if __LINUX_ARM_ARCH__ >= 6 + COPROCESSOR_INSTRUCTIONS_MC_MR("2","f") +#endif + + TEST_GROUP("Miscellaneous instructions, memory hints, and Advanced SIMD instructions") + +#if __LINUX_ARM_ARCH__ >= 6 + TEST_UNSUPPORTED("cps 0x13") + TEST_UNSUPPORTED("cpsie i") + TEST_UNSUPPORTED("cpsid i") + TEST_UNSUPPORTED("cpsie i,0x13") + TEST_UNSUPPORTED("cpsid i,0x13") + TEST_UNSUPPORTED("setend le") + TEST_UNSUPPORTED("setend be") +#endif + +#if __LINUX_ARM_ARCH__ >= 7 + TEST_P("pli [r",0,0b,", #16]") + TEST( "pli [pc, #0]") + TEST_RR("pli [r",12,0b,", r",0, 16,"]") + TEST_RR("pli [r",0, 0b,", -r",12,16,", lsl #4]") +#endif + +#if __LINUX_ARM_ARCH__ >= 5 + TEST_P("pld [r",0,32,", #-16]") + TEST( "pld [pc, #0]") + TEST_PR("pld [r",7, 24, ", r",0, 16,"]") + TEST_PR("pld [r",8, 24, ", -r",12,16,", lsl #4]") +#endif + +#if __LINUX_ARM_ARCH__ >= 7 + TEST_SUPPORTED( ".word 0xf590f000 @ pldw [r0, #0]") + TEST_SUPPORTED( ".word 0xf797f000 @ pldw [r7, r0]") + TEST_SUPPORTED( ".word 0xf798f18c @ pldw [r8, r12, lsl #3]"); +#endif + +#if __LINUX_ARM_ARCH__ >= 7 + TEST_UNSUPPORTED("clrex") + TEST_UNSUPPORTED("dsb") + TEST_UNSUPPORTED("dmb") + TEST_UNSUPPORTED("isb") +#endif + + verbose("\n"); +} + diff --git a/arch/arm/kernel/kprobes-test-thumb.c b/arch/arm/kernel/kprobes-test-thumb.c new file mode 100644 index 00000000000..5e726c31c45 --- /dev/null +++ b/arch/arm/kernel/kprobes-test-thumb.c @@ -0,0 +1,1187 @@ +/* + * arch/arm/kernel/kprobes-test-thumb.c + * + * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> + +#include "kprobes-test.h" + + +#define TEST_ISA "16" + +#define DONT_TEST_IN_ITBLOCK(tests) \ + kprobe_test_flags |= TEST_FLAG_NO_ITBLOCK; \ + tests \ + kprobe_test_flags &= ~TEST_FLAG_NO_ITBLOCK; + +#define CONDITION_INSTRUCTIONS(cc_pos, tests) \ + kprobe_test_cc_position = cc_pos; \ + DONT_TEST_IN_ITBLOCK(tests) \ + kprobe_test_cc_position = 0; + +#define TEST_ITBLOCK(code) \ + kprobe_test_flags |= TEST_FLAG_FULL_ITBLOCK; \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + "50: nop \n\t" \ + "1: "code" \n\t" \ + " mov r1, #0x11 \n\t" \ + " mov r2, #0x22 \n\t" \ + " mov r3, #0x33 \n\t" \ + "2: nop \n\t" \ + TESTCASE_END \ + kprobe_test_flags &= ~TEST_FLAG_FULL_ITBLOCK; + +#define TEST_THUMB_TO_ARM_INTERWORK_P(code1, reg, val, code2) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_PTR(reg, val) \ + TEST_ARG_REG(14, 99f+1) \ + TEST_ARG_MEM(15, 3f) \ + TEST_ARG_END("") \ + " nop \n\t" /* To align 1f */ \ + "50: nop \n\t" \ + "1: "code1 #reg code2" \n\t" \ + " bx lr \n\t" \ + ".arm \n\t" \ + "3: adr lr, 2f+1 \n\t" \ + " bx lr \n\t" \ + ".thumb \n\t" \ + "2: nop \n\t" \ + TESTCASE_END + + +void kprobe_thumb16_test_cases(void) +{ + kprobe_test_flags = TEST_FLAG_NARROW_INSTR; + + TEST_GROUP("Shift (immediate), add, subtract, move, and compare") + + TEST_R( "lsls r7, r",0,VAL1,", #5") + TEST_R( "lsls r0, r",7,VAL2,", #11") + TEST_R( "lsrs r7, r",0,VAL1,", #5") + TEST_R( "lsrs r0, r",7,VAL2,", #11") + TEST_R( "asrs r7, r",0,VAL1,", #5") + TEST_R( "asrs r0, r",7,VAL2,", #11") + TEST_RR( "adds r2, r",0,VAL1,", r",7,VAL2,"") + TEST_RR( "adds r5, r",7,VAL2,", r",0,VAL2,"") + TEST_RR( "subs r2, r",0,VAL1,", r",7,VAL2,"") + TEST_RR( "subs r5, r",7,VAL2,", r",0,VAL2,"") + TEST_R( "adds r7, r",0,VAL1,", #5") + TEST_R( "adds r0, r",7,VAL2,", #2") + TEST_R( "subs r7, r",0,VAL1,", #5") + TEST_R( "subs r0, r",7,VAL2,", #2") + TEST( "movs.n r0, #0x5f") + TEST( "movs.n r7, #0xa0") + TEST_R( "cmp.n r",0,0x5e, ", #0x5f") + TEST_R( "cmp.n r",5,0x15f,", #0x5f") + TEST_R( "cmp.n r",7,0xa0, ", #0xa0") + TEST_R( "adds.n r",0,VAL1,", #0x5f") + TEST_R( "adds.n r",7,VAL2,", #0xa0") + TEST_R( "subs.n r",0,VAL1,", #0x5f") + TEST_R( "subs.n r",7,VAL2,", #0xa0") + + TEST_GROUP("16-bit Thumb data-processing instructions") + +#define DATA_PROCESSING16(op,val) \ + TEST_RR( op" r",0,VAL1,", r",7,val,"") \ + TEST_RR( op" r",7,VAL2,", r",0,val,"") + + DATA_PROCESSING16("ands",0xf00f00ff) + DATA_PROCESSING16("eors",0xf00f00ff) + DATA_PROCESSING16("lsls",11) + DATA_PROCESSING16("lsrs",11) + DATA_PROCESSING16("asrs",11) + DATA_PROCESSING16("adcs",VAL2) + DATA_PROCESSING16("sbcs",VAL2) + DATA_PROCESSING16("rors",11) + DATA_PROCESSING16("tst",0xf00f00ff) + TEST_R("rsbs r",0,VAL1,", #0") + TEST_R("rsbs r",7,VAL2,", #0") + DATA_PROCESSING16("cmp",0xf00f00ff) + DATA_PROCESSING16("cmn",0xf00f00ff) + DATA_PROCESSING16("orrs",0xf00f00ff) + DATA_PROCESSING16("muls",VAL2) + DATA_PROCESSING16("bics",0xf00f00ff) + DATA_PROCESSING16("mvns",VAL2) + + TEST_GROUP("Special data instructions and branch and exchange") + + TEST_RR( "add r",0, VAL1,", r",7,VAL2,"") + TEST_RR( "add r",3, VAL2,", r",8,VAL3,"") + TEST_RR( "add r",8, VAL3,", r",0,VAL1,"") + TEST_R( "add sp" ", r",8,-8, "") + TEST_R( "add r",14,VAL1,", pc") + TEST_BF_R("add pc" ", r",0,2f-1f-8,"") + TEST_UNSUPPORTED(".short 0x44ff @ add pc, pc") + + TEST_RR( "cmp r",3,VAL1,", r",8,VAL2,"") + TEST_RR( "cmp r",8,VAL2,", r",0,VAL1,"") + TEST_R( "cmp sp" ", r",8,-8, "") + + TEST_R( "mov r0, r",7,VAL2,"") + TEST_R( "mov r3, r",8,VAL3,"") + TEST_R( "mov r8, r",0,VAL1,"") + TEST_P( "mov sp, r",8,-8, "") + TEST( "mov lr, pc") + TEST_BF_R("mov pc, r",0,2f, "") + + TEST_BF_R("bx r",0, 2f+1,"") + TEST_BF_R("bx r",14,2f+1,"") + TESTCASE_START("bx pc") + TEST_ARG_REG(14, 99f+1) + TEST_ARG_END("") + " nop \n\t" /* To align the bx pc*/ + "50: nop \n\t" + "1: bx pc \n\t" + " bx lr \n\t" + ".arm \n\t" + " adr lr, 2f+1 \n\t" + " bx lr \n\t" + ".thumb \n\t" + "2: nop \n\t" + TESTCASE_END + + TEST_BF_R("blx r",0, 2f+1,"") + TEST_BB_R("blx r",14,2f+1,"") + TEST_UNSUPPORTED(".short 0x47f8 @ blx pc") + + TEST_GROUP("Load from Literal Pool") + + TEST_X( "ldr r0, 3f", + ".align \n\t" + "3: .word "__stringify(VAL1)) + TEST_X( "ldr r7, 3f", + ".space 128 \n\t" + ".align \n\t" + "3: .word "__stringify(VAL2)) + + TEST_GROUP("16-bit Thumb Load/store instructions") + + TEST_RPR("str r",0, VAL1,", [r",1, 24,", r",2, 48,"]") + TEST_RPR("str r",7, VAL2,", [r",6, 24,", r",5, 48,"]") + TEST_RPR("strh r",0, VAL1,", [r",1, 24,", r",2, 48,"]") + TEST_RPR("strh r",7, VAL2,", [r",6, 24,", r",5, 48,"]") + TEST_RPR("strb r",0, VAL1,", [r",1, 24,", r",2, 48,"]") + TEST_RPR("strb r",7, VAL2,", [r",6, 24,", r",5, 48,"]") + TEST_PR( "ldrsb r0, [r",1, 24,", r",2, 48,"]") + TEST_PR( "ldrsb r7, [r",6, 24,", r",5, 50,"]") + TEST_PR( "ldr r0, [r",1, 24,", r",2, 48,"]") + TEST_PR( "ldr r7, [r",6, 24,", r",5, 48,"]") + TEST_PR( "ldrh r0, [r",1, 24,", r",2, 48,"]") + TEST_PR( "ldrh r7, [r",6, 24,", r",5, 50,"]") + TEST_PR( "ldrb r0, [r",1, 24,", r",2, 48,"]") + TEST_PR( "ldrb r7, [r",6, 24,", r",5, 50,"]") + TEST_PR( "ldrsh r0, [r",1, 24,", r",2, 48,"]") + TEST_PR( "ldrsh r7, [r",6, 24,", r",5, 50,"]") + + TEST_RP("str r",0, VAL1,", [r",1, 24,", #120]") + TEST_RP("str r",7, VAL2,", [r",6, 24,", #120]") + TEST_P( "ldr r0, [r",1, 24,", #120]") + TEST_P( "ldr r7, [r",6, 24,", #120]") + TEST_RP("strb r",0, VAL1,", [r",1, 24,", #30]") + TEST_RP("strb r",7, VAL2,", [r",6, 24,", #30]") + TEST_P( "ldrb r0, [r",1, 24,", #30]") + TEST_P( "ldrb r7, [r",6, 24,", #30]") + TEST_RP("strh r",0, VAL1,", [r",1, 24,", #60]") + TEST_RP("strh r",7, VAL2,", [r",6, 24,", #60]") + TEST_P( "ldrh r0, [r",1, 24,", #60]") + TEST_P( "ldrh r7, [r",6, 24,", #60]") + + TEST_R( "str r",0, VAL1,", [sp, #0]") + TEST_R( "str r",7, VAL2,", [sp, #160]") + TEST( "ldr r0, [sp, #0]") + TEST( "ldr r7, [sp, #160]") + + TEST_RP("str r",0, VAL1,", [r",0, 24,"]") + TEST_P( "ldr r0, [r",0, 24,"]") + + TEST_GROUP("Generate PC-/SP-relative address") + + TEST("add r0, pc, #4") + TEST("add r7, pc, #1020") + TEST("add r0, sp, #4") + TEST("add r7, sp, #1020") + + TEST_GROUP("Miscellaneous 16-bit instructions") + + TEST_UNSUPPORTED( "cpsie i") + TEST_UNSUPPORTED( "cpsid i") + TEST_UNSUPPORTED( "setend le") + TEST_UNSUPPORTED( "setend be") + + TEST("add sp, #"__stringify(TEST_MEMORY_SIZE)) /* Assumes TEST_MEMORY_SIZE < 0x400 */ + TEST("sub sp, #0x7f*4") + +DONT_TEST_IN_ITBLOCK( + TEST_BF_R( "cbnz r",0,0, ", 2f") + TEST_BF_R( "cbz r",2,-1,", 2f") + TEST_BF_RX( "cbnz r",4,1, ", 2f",0x20) + TEST_BF_RX( "cbz r",7,0, ", 2f",0x40) +) + TEST_R("sxth r0, r",7, HH1,"") + TEST_R("sxth r7, r",0, HH2,"") + TEST_R("sxtb r0, r",7, HH1,"") + TEST_R("sxtb r7, r",0, HH2,"") + TEST_R("uxth r0, r",7, HH1,"") + TEST_R("uxth r7, r",0, HH2,"") + TEST_R("uxtb r0, r",7, HH1,"") + TEST_R("uxtb r7, r",0, HH2,"") + TEST_R("rev r0, r",7, VAL1,"") + TEST_R("rev r7, r",0, VAL2,"") + TEST_R("rev16 r0, r",7, VAL1,"") + TEST_R("rev16 r7, r",0, VAL2,"") + TEST_UNSUPPORTED(".short 0xba80") + TEST_UNSUPPORTED(".short 0xbabf") + TEST_R("revsh r0, r",7, VAL1,"") + TEST_R("revsh r7, r",0, VAL2,"") + +#define TEST_POPPC(code, offset) \ + TESTCASE_START(code) \ + TEST_ARG_PTR(13, offset) \ + TEST_ARG_END("") \ + TEST_BRANCH_F(code,0) \ + TESTCASE_END + + TEST("push {r0}") + TEST("push {r7}") + TEST("push {r14}") + TEST("push {r0-r7,r14}") + TEST("push {r0,r2,r4,r6,r14}") + TEST("push {r1,r3,r5,r7}") + TEST("pop {r0}") + TEST("pop {r7}") + TEST("pop {r0,r2,r4,r6}") + TEST_POPPC("pop {pc}",15*4) + TEST_POPPC("pop {r0-r7,pc}",7*4) + TEST_POPPC("pop {r1,r3,r5,r7,pc}",11*4) + TEST_THUMB_TO_ARM_INTERWORK_P("pop {pc} @ ",13,15*4,"") + TEST_THUMB_TO_ARM_INTERWORK_P("pop {r0-r7,pc} @ ",13,7*4,"") + + TEST_UNSUPPORTED("bkpt.n 0") + TEST_UNSUPPORTED("bkpt.n 255") + + TEST_SUPPORTED("yield") + TEST("sev") + TEST("nop") + TEST("wfi") + TEST_SUPPORTED("wfe") + TEST_UNSUPPORTED(".short 0xbf50") /* Unassigned hints */ + TEST_UNSUPPORTED(".short 0xbff0") /* Unassigned hints */ + +#define TEST_IT(code, code2) \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + "50: nop \n\t" \ + "1: "code" \n\t" \ + " "code2" \n\t" \ + "2: nop \n\t" \ + TESTCASE_END + +DONT_TEST_IN_ITBLOCK( + TEST_IT("it eq","moveq r0,#0") + TEST_IT("it vc","movvc r0,#0") + TEST_IT("it le","movle r0,#0") + TEST_IT("ite eq","moveq r0,#0\n\t movne r1,#1") + TEST_IT("itet vc","movvc r0,#0\n\t movvs r1,#1\n\t movvc r2,#2") + TEST_IT("itete le","movle r0,#0\n\t movgt r1,#1\n\t movle r2,#2\n\t movgt r3,#3") + TEST_IT("itttt le","movle r0,#0\n\t movle r1,#1\n\t movle r2,#2\n\t movle r3,#3") + TEST_IT("iteee le","movle r0,#0\n\t movgt r1,#1\n\t movgt r2,#2\n\t movgt r3,#3") +) + + TEST_GROUP("Load and store multiple") + + TEST_P("ldmia r",4, 16*4,"!, {r0,r7}") + TEST_P("ldmia r",7, 16*4,"!, {r0-r6}") + TEST_P("stmia r",4, 16*4,"!, {r0,r7}") + TEST_P("stmia r",0, 16*4,"!, {r0-r7}") + + TEST_GROUP("Conditional branch and Supervisor Call instructions") + +CONDITION_INSTRUCTIONS(8, + TEST_BF("beq 2f") + TEST_BB("bne 2b") + TEST_BF("bgt 2f") + TEST_BB("blt 2b") +) + TEST_UNSUPPORTED(".short 0xde00") + TEST_UNSUPPORTED(".short 0xdeff") + TEST_UNSUPPORTED("svc #0x00") + TEST_UNSUPPORTED("svc #0xff") + + TEST_GROUP("Unconditional branch") + + TEST_BF( "b 2f") + TEST_BB( "b 2b") + TEST_BF_X("b 2f", 0x400) + TEST_BB_X("b 2b", 0x400) + + TEST_GROUP("Testing instructions in IT blocks") + + TEST_ITBLOCK("subs.n r0, r0") + + verbose("\n"); +} + + +void kprobe_thumb32_test_cases(void) +{ + kprobe_test_flags = 0; + + TEST_GROUP("Load/store multiple") + + TEST_UNSUPPORTED("rfedb sp") + TEST_UNSUPPORTED("rfeia sp") + TEST_UNSUPPORTED("rfedb sp!") + TEST_UNSUPPORTED("rfeia sp!") + + TEST_P( "stmia r",0, 16*4,", {r0,r8}") + TEST_P( "stmia r",4, 16*4,", {r0-r12,r14}") + TEST_P( "stmia r",7, 16*4,"!, {r8-r12,r14}") + TEST_P( "stmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + + TEST_P( "ldmia r",0, 16*4,", {r0,r8}") + TEST_P( "ldmia r",4, 0, ", {r0-r12,r14}") + TEST_BF_P("ldmia r",5, 8*4, "!, {r6-r12,r15}") + TEST_P( "ldmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + TEST_BF_P("ldmia r",14,14*4,"!, {r4,pc}") + + TEST_P( "stmdb r",0, 16*4,", {r0,r8}") + TEST_P( "stmdb r",4, 16*4,", {r0-r12,r14}") + TEST_P( "stmdb r",5, 16*4,"!, {r8-r12,r14}") + TEST_P( "stmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + + TEST_P( "ldmdb r",0, 16*4,", {r0,r8}") + TEST_P( "ldmdb r",4, 16*4,", {r0-r12,r14}") + TEST_BF_P("ldmdb r",5, 16*4,"!, {r6-r12,r15}") + TEST_P( "ldmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}") + TEST_BF_P("ldmdb r",14,16*4,"!, {r4,pc}") + + TEST_P( "stmdb r",13,16*4,"!, {r3-r12,lr}") + TEST_P( "stmdb r",13,16*4,"!, {r3-r12}") + TEST_P( "stmdb r",2, 16*4,", {r3-r12,lr}") + TEST_P( "stmdb r",13,16*4,"!, {r2-r12,lr}") + TEST_P( "stmdb r",0, 16*4,", {r0-r12}") + TEST_P( "stmdb r",0, 16*4,", {r0-r12,lr}") + + TEST_BF_P("ldmia r",13,5*4, "!, {r3-r12,pc}") + TEST_P( "ldmia r",13,5*4, "!, {r3-r12}") + TEST_BF_P("ldmia r",2, 5*4, "!, {r3-r12,pc}") + TEST_BF_P("ldmia r",13,4*4, "!, {r2-r12,pc}") + TEST_P( "ldmia r",0, 16*4,", {r0-r12}") + TEST_P( "ldmia r",0, 16*4,", {r0-r12,lr}") + + TEST_THUMB_TO_ARM_INTERWORK_P("ldmia r",0,14*4,", {r12,pc}") + TEST_THUMB_TO_ARM_INTERWORK_P("ldmia r",13,2*4,", {r0-r12,pc}") + + TEST_UNSUPPORTED(".short 0xe88f,0x0101 @ stmia pc, {r0,r8}") + TEST_UNSUPPORTED(".short 0xe92f,0x5f00 @ stmdb pc!, {r8-r12,r14}") + TEST_UNSUPPORTED(".short 0xe8bd,0xc000 @ ldmia r13!, {r14,pc}") + TEST_UNSUPPORTED(".short 0xe93e,0xc000 @ ldmdb r14!, {r14,pc}") + TEST_UNSUPPORTED(".short 0xe8a7,0x3f00 @ stmia r7!, {r8-r12,sp}") + TEST_UNSUPPORTED(".short 0xe8a7,0x9f00 @ stmia r7!, {r8-r12,pc}") + TEST_UNSUPPORTED(".short 0xe93e,0x2010 @ ldmdb r14!, {r4,sp}") + + TEST_GROUP("Load/store double or exclusive, table branch") + + TEST_P( "ldrd r0, r1, [r",1, 24,", #-16]") + TEST( "ldrd r12, r14, [sp, #16]") + TEST_P( "ldrd r1, r0, [r",7, 24,", #-16]!") + TEST( "ldrd r14, r12, [sp, #16]!") + TEST_P( "ldrd r1, r0, [r",7, 24,"], #16") + TEST( "ldrd r7, r8, [sp], #-16") + + TEST_X( "ldrd r12, r14, 3f", + ".align 3 \n\t" + "3: .word "__stringify(VAL1)" \n\t" + " .word "__stringify(VAL2)) + + TEST_UNSUPPORTED(".short 0xe9ff,0xec04 @ ldrd r14, r12, [pc, #16]!") + TEST_UNSUPPORTED(".short 0xe8ff,0xec04 @ ldrd r14, r12, [pc], #16") + TEST_UNSUPPORTED(".short 0xe9d4,0xd800 @ ldrd sp, r8, [r4]") + TEST_UNSUPPORTED(".short 0xe9d4,0xf800 @ ldrd pc, r8, [r4]") + TEST_UNSUPPORTED(".short 0xe9d4,0x7d00 @ ldrd r7, sp, [r4]") + TEST_UNSUPPORTED(".short 0xe9d4,0x7f00 @ ldrd r7, pc, [r4]") + + TEST_RRP("strd r",0, VAL1,", r",1, VAL2,", [r",1, 24,", #-16]") + TEST_RR( "strd r",12,VAL2,", r",14,VAL1,", [sp, #16]") + TEST_RRP("strd r",1, VAL1,", r",0, VAL2,", [r",7, 24,", #-16]!") + TEST_RR( "strd r",14,VAL2,", r",12,VAL1,", [sp, #16]!") + TEST_RRP("strd r",1, VAL1,", r",0, VAL2,", [r",7, 24,"], #16") + TEST_RR( "strd r",7, VAL2,", r",8, VAL1,", [sp], #-16") + TEST_UNSUPPORTED(".short 0xe9ef,0xec04 @ strd r14, r12, [pc, #16]!") + TEST_UNSUPPORTED(".short 0xe8ef,0xec04 @ strd r14, r12, [pc], #16") + + TEST_RX("tbb [pc, r",0, (9f-(1f+4)),"]", + "9: \n\t" + ".byte (2f-1b-4)>>1 \n\t" + ".byte (3f-1b-4)>>1 \n\t" + "3: mvn r0, r0 \n\t" + "2: nop \n\t") + + TEST_RX("tbb [pc, r",4, (9f-(1f+4)+1),"]", + "9: \n\t" + ".byte (2f-1b-4)>>1 \n\t" + ".byte (3f-1b-4)>>1 \n\t" + "3: mvn r0, r0 \n\t" + "2: nop \n\t") + + TEST_RRX("tbb [r",1,9f,", r",2,0,"]", + "9: \n\t" + ".byte (2f-1b-4)>>1 \n\t" + ".byte (3f-1b-4)>>1 \n\t" + "3: mvn r0, r0 \n\t" + "2: nop \n\t") + + TEST_RX("tbh [pc, r",7, (9f-(1f+4))>>1,"]", + "9: \n\t" + ".short (2f-1b-4)>>1 \n\t" + ".short (3f-1b-4)>>1 \n\t" + "3: mvn r0, r0 \n\t" + "2: nop \n\t") + + TEST_RX("tbh [pc, r",12, ((9f-(1f+4))>>1)+1,"]", + "9: \n\t" + ".short (2f-1b-4)>>1 \n\t" + ".short (3f-1b-4)>>1 \n\t" + "3: mvn r0, r0 \n\t" + "2: nop \n\t") + + TEST_RRX("tbh [r",1,9f, ", r",14,1,"]", + "9: \n\t" + ".short (2f-1b-4)>>1 \n\t" + ".short (3f-1b-4)>>1 \n\t" + "3: mvn r0, r0 \n\t" + "2: nop \n\t") + + TEST_UNSUPPORTED(".short 0xe8d1,0xf01f @ tbh [r1, pc]") + TEST_UNSUPPORTED(".short 0xe8d1,0xf01d @ tbh [r1, sp]") + TEST_UNSUPPORTED(".short 0xe8dd,0xf012 @ tbh [sp, r2]") + + TEST_UNSUPPORTED("strexb r0, r1, [r2]") + TEST_UNSUPPORTED("strexh r0, r1, [r2]") + TEST_UNSUPPORTED("strexd r0, r1, [r2]") + TEST_UNSUPPORTED("ldrexb r0, [r1]") + TEST_UNSUPPORTED("ldrexh r0, [r1]") + TEST_UNSUPPORTED("ldrexd r0, [r1]") + + TEST_GROUP("Data-processing (shifted register) and (modified immediate)") + +#define _DATA_PROCESSING32_DNM(op,s,val) \ + TEST_RR(op s".w r0, r",1, VAL1,", r",2, val, "") \ + TEST_RR(op s" r1, r",1, VAL1,", r",2, val, ", lsl #3") \ + TEST_RR(op s" r2, r",3, VAL1,", r",2, val, ", lsr #4") \ + TEST_RR(op s" r3, r",3, VAL1,", r",2, val, ", asr #5") \ + TEST_RR(op s" r4, r",5, VAL1,", r",2, N(val),", asr #6") \ + TEST_RR(op s" r5, r",5, VAL1,", r",2, val, ", ror #7") \ + TEST_RR(op s" r8, r",9, VAL1,", r",10,val, ", rrx") \ + TEST_R( op s" r0, r",11,VAL1,", #0x00010001") \ + TEST_R( op s" r11, r",0, VAL1,", #0xf5000000") \ + TEST_R( op s" r7, r",8, VAL2,", #0x000af000") + +#define DATA_PROCESSING32_DNM(op,val) \ + _DATA_PROCESSING32_DNM(op,"",val) \ + _DATA_PROCESSING32_DNM(op,"s",val) + +#define DATA_PROCESSING32_NM(op,val) \ + TEST_RR(op".w r",1, VAL1,", r",2, val, "") \ + TEST_RR(op" r",1, VAL1,", r",2, val, ", lsl #3") \ + TEST_RR(op" r",3, VAL1,", r",2, val, ", lsr #4") \ + TEST_RR(op" r",3, VAL1,", r",2, val, ", asr #5") \ + TEST_RR(op" r",5, VAL1,", r",2, N(val),", asr #6") \ + TEST_RR(op" r",5, VAL1,", r",2, val, ", ror #7") \ + TEST_RR(op" r",9, VAL1,", r",10,val, ", rrx") \ + TEST_R( op" r",11,VAL1,", #0x00010001") \ + TEST_R( op" r",0, VAL1,", #0xf5000000") \ + TEST_R( op" r",8, VAL2,", #0x000af000") + +#define _DATA_PROCESSING32_DM(op,s,val) \ + TEST_R( op s".w r0, r",14, val, "") \ + TEST_R( op s" r1, r",12, val, ", lsl #3") \ + TEST_R( op s" r2, r",11, val, ", lsr #4") \ + TEST_R( op s" r3, r",10, val, ", asr #5") \ + TEST_R( op s" r4, r",9, N(val),", asr #6") \ + TEST_R( op s" r5, r",8, val, ", ror #7") \ + TEST_R( op s" r8, r",7,val, ", rrx") \ + TEST( op s" r0, #0x00010001") \ + TEST( op s" r11, #0xf5000000") \ + TEST( op s" r7, #0x000af000") \ + TEST( op s" r4, #0x00005a00") + +#define DATA_PROCESSING32_DM(op,val) \ + _DATA_PROCESSING32_DM(op,"",val) \ + _DATA_PROCESSING32_DM(op,"s",val) + + DATA_PROCESSING32_DNM("and",0xf00f00ff) + DATA_PROCESSING32_NM("tst",0xf00f00ff) + DATA_PROCESSING32_DNM("bic",0xf00f00ff) + DATA_PROCESSING32_DNM("orr",0xf00f00ff) + DATA_PROCESSING32_DM("mov",VAL2) + DATA_PROCESSING32_DNM("orn",0xf00f00ff) + DATA_PROCESSING32_DM("mvn",VAL2) + DATA_PROCESSING32_DNM("eor",0xf00f00ff) + DATA_PROCESSING32_NM("teq",0xf00f00ff) + DATA_PROCESSING32_DNM("add",VAL2) + DATA_PROCESSING32_NM("cmn",VAL2) + DATA_PROCESSING32_DNM("adc",VAL2) + DATA_PROCESSING32_DNM("sbc",VAL2) + DATA_PROCESSING32_DNM("sub",VAL2) + DATA_PROCESSING32_NM("cmp",VAL2) + DATA_PROCESSING32_DNM("rsb",VAL2) + + TEST_RR("pkhbt r0, r",0, HH1,", r",1, HH2,"") + TEST_RR("pkhbt r14,r",12, HH1,", r",10,HH2,", lsl #2") + TEST_RR("pkhtb r0, r",0, HH1,", r",1, HH2,"") + TEST_RR("pkhtb r14,r",12, HH1,", r",10,HH2,", asr #2") + + TEST_UNSUPPORTED(".short 0xea17,0x0f0d @ tst.w r7, sp") + TEST_UNSUPPORTED(".short 0xea17,0x0f0f @ tst.w r7, pc") + TEST_UNSUPPORTED(".short 0xea1d,0x0f07 @ tst.w sp, r7") + TEST_UNSUPPORTED(".short 0xea1f,0x0f07 @ tst.w pc, r7") + TEST_UNSUPPORTED(".short 0xf01d,0x1f08 @ tst sp, #0x00080008") + TEST_UNSUPPORTED(".short 0xf01f,0x1f08 @ tst pc, #0x00080008") + + TEST_UNSUPPORTED(".short 0xea97,0x0f0d @ teq.w r7, sp") + TEST_UNSUPPORTED(".short 0xea97,0x0f0f @ teq.w r7, pc") + TEST_UNSUPPORTED(".short 0xea9d,0x0f07 @ teq.w sp, r7") + TEST_UNSUPPORTED(".short 0xea9f,0x0f07 @ teq.w pc, r7") + TEST_UNSUPPORTED(".short 0xf09d,0x1f08 @ tst sp, #0x00080008") + TEST_UNSUPPORTED(".short 0xf09f,0x1f08 @ tst pc, #0x00080008") + + TEST_UNSUPPORTED(".short 0xeb17,0x0f0d @ cmn.w r7, sp") + TEST_UNSUPPORTED(".short 0xeb17,0x0f0f @ cmn.w r7, pc") + TEST_P("cmn.w sp, r",7,0,"") + TEST_UNSUPPORTED(".short 0xeb1f,0x0f07 @ cmn.w pc, r7") + TEST( "cmn sp, #0x00080008") + TEST_UNSUPPORTED(".short 0xf11f,0x1f08 @ cmn pc, #0x00080008") + + TEST_UNSUPPORTED(".short 0xebb7,0x0f0d @ cmp.w r7, sp") + TEST_UNSUPPORTED(".short 0xebb7,0x0f0f @ cmp.w r7, pc") + TEST_P("cmp.w sp, r",7,0,"") + TEST_UNSUPPORTED(".short 0xebbf,0x0f07 @ cmp.w pc, r7") + TEST( "cmp sp, #0x00080008") + TEST_UNSUPPORTED(".short 0xf1bf,0x1f08 @ cmp pc, #0x00080008") + + TEST_UNSUPPORTED(".short 0xea5f,0x070d @ movs.w r7, sp") + TEST_UNSUPPORTED(".short 0xea5f,0x070f @ movs.w r7, pc") + TEST_UNSUPPORTED(".short 0xea5f,0x0d07 @ movs.w sp, r7") + TEST_UNSUPPORTED(".short 0xea4f,0x0f07 @ mov.w pc, r7") + TEST_UNSUPPORTED(".short 0xf04f,0x1d08 @ mov sp, #0x00080008") + TEST_UNSUPPORTED(".short 0xf04f,0x1f08 @ mov pc, #0x00080008") + + TEST_R("add.w r0, sp, r",1, 4,"") + TEST_R("adds r0, sp, r",1, 4,", asl #3") + TEST_R("add r0, sp, r",1, 4,", asl #4") + TEST_R("add r0, sp, r",1, 16,", ror #1") + TEST_R("add.w sp, sp, r",1, 4,"") + TEST_R("add sp, sp, r",1, 4,", asl #3") + TEST_UNSUPPORTED(".short 0xeb0d,0x1d01 @ add sp, sp, r1, asl #4") + TEST_UNSUPPORTED(".short 0xeb0d,0x0d71 @ add sp, sp, r1, ror #1") + TEST( "add.w r0, sp, #24") + TEST( "add.w sp, sp, #24") + TEST_UNSUPPORTED(".short 0xeb0d,0x0f01 @ add pc, sp, r1") + TEST_UNSUPPORTED(".short 0xeb0d,0x000f @ add r0, sp, pc") + TEST_UNSUPPORTED(".short 0xeb0d,0x000d @ add r0, sp, sp") + TEST_UNSUPPORTED(".short 0xeb0d,0x0d0f @ add sp, sp, pc") + TEST_UNSUPPORTED(".short 0xeb0d,0x0d0d @ add sp, sp, sp") + + TEST_R("sub.w r0, sp, r",1, 4,"") + TEST_R("subs r0, sp, r",1, 4,", asl #3") + TEST_R("sub r0, sp, r",1, 4,", asl #4") + TEST_R("sub r0, sp, r",1, 16,", ror #1") + TEST_R("sub.w sp, sp, r",1, 4,"") + TEST_R("sub sp, sp, r",1, 4,", asl #3") + TEST_UNSUPPORTED(".short 0xebad,0x1d01 @ sub sp, sp, r1, asl #4") + TEST_UNSUPPORTED(".short 0xebad,0x0d71 @ sub sp, sp, r1, ror #1") + TEST_UNSUPPORTED(".short 0xebad,0x0f01 @ sub pc, sp, r1") + TEST( "sub.w r0, sp, #24") + TEST( "sub.w sp, sp, #24") + + TEST_UNSUPPORTED(".short 0xea02,0x010f @ and r1, r2, pc") + TEST_UNSUPPORTED(".short 0xea0f,0x0103 @ and r1, pc, r3") + TEST_UNSUPPORTED(".short 0xea02,0x0f03 @ and pc, r2, r3") + TEST_UNSUPPORTED(".short 0xea02,0x010d @ and r1, r2, sp") + TEST_UNSUPPORTED(".short 0xea0d,0x0103 @ and r1, sp, r3") + TEST_UNSUPPORTED(".short 0xea02,0x0d03 @ and sp, r2, r3") + TEST_UNSUPPORTED(".short 0xf00d,0x1108 @ and r1, sp, #0x00080008") + TEST_UNSUPPORTED(".short 0xf00f,0x1108 @ and r1, pc, #0x00080008") + TEST_UNSUPPORTED(".short 0xf002,0x1d08 @ and sp, r8, #0x00080008") + TEST_UNSUPPORTED(".short 0xf002,0x1f08 @ and pc, r8, #0x00080008") + + TEST_UNSUPPORTED(".short 0xeb02,0x010f @ add r1, r2, pc") + TEST_UNSUPPORTED(".short 0xeb0f,0x0103 @ add r1, pc, r3") + TEST_UNSUPPORTED(".short 0xeb02,0x0f03 @ add pc, r2, r3") + TEST_UNSUPPORTED(".short 0xeb02,0x010d @ add r1, r2, sp") + TEST_SUPPORTED( ".short 0xeb0d,0x0103 @ add r1, sp, r3") + TEST_UNSUPPORTED(".short 0xeb02,0x0d03 @ add sp, r2, r3") + TEST_SUPPORTED( ".short 0xf10d,0x1108 @ add r1, sp, #0x00080008") + TEST_UNSUPPORTED(".short 0xf10d,0x1f08 @ add pc, sp, #0x00080008") + TEST_UNSUPPORTED(".short 0xf10f,0x1108 @ add r1, pc, #0x00080008") + TEST_UNSUPPORTED(".short 0xf102,0x1d08 @ add sp, r8, #0x00080008") + TEST_UNSUPPORTED(".short 0xf102,0x1f08 @ add pc, r8, #0x00080008") + + TEST_UNSUPPORTED(".short 0xeaa0,0x0000") + TEST_UNSUPPORTED(".short 0xeaf0,0x0000") + TEST_UNSUPPORTED(".short 0xeb20,0x0000") + TEST_UNSUPPORTED(".short 0xeb80,0x0000") + TEST_UNSUPPORTED(".short 0xebe0,0x0000") + + TEST_UNSUPPORTED(".short 0xf0a0,0x0000") + TEST_UNSUPPORTED(".short 0xf0c0,0x0000") + TEST_UNSUPPORTED(".short 0xf0f0,0x0000") + TEST_UNSUPPORTED(".short 0xf120,0x0000") + TEST_UNSUPPORTED(".short 0xf180,0x0000") + TEST_UNSUPPORTED(".short 0xf1e0,0x0000") + + TEST_GROUP("Coprocessor instructions") + + TEST_UNSUPPORTED(".short 0xec00,0x0000") + TEST_UNSUPPORTED(".short 0xeff0,0x0000") + TEST_UNSUPPORTED(".short 0xfc00,0x0000") + TEST_UNSUPPORTED(".short 0xfff0,0x0000") + + TEST_GROUP("Data-processing (plain binary immediate)") + + TEST_R("addw r0, r",1, VAL1,", #0x123") + TEST( "addw r14, sp, #0xf5a") + TEST( "addw sp, sp, #0x20") + TEST( "addw r7, pc, #0x888") + TEST_UNSUPPORTED(".short 0xf20f,0x1f20 @ addw pc, pc, #0x120") + TEST_UNSUPPORTED(".short 0xf20d,0x1f20 @ addw pc, sp, #0x120") + TEST_UNSUPPORTED(".short 0xf20f,0x1d20 @ addw sp, pc, #0x120") + TEST_UNSUPPORTED(".short 0xf200,0x1d20 @ addw sp, r0, #0x120") + + TEST_R("subw r0, r",1, VAL1,", #0x123") + TEST( "subw r14, sp, #0xf5a") + TEST( "subw sp, sp, #0x20") + TEST( "subw r7, pc, #0x888") + TEST_UNSUPPORTED(".short 0xf2af,0x1f20 @ subw pc, pc, #0x120") + TEST_UNSUPPORTED(".short 0xf2ad,0x1f20 @ subw pc, sp, #0x120") + TEST_UNSUPPORTED(".short 0xf2af,0x1d20 @ subw sp, pc, #0x120") + TEST_UNSUPPORTED(".short 0xf2a0,0x1d20 @ subw sp, r0, #0x120") + + TEST("movw r0, #0") + TEST("movw r0, #0xffff") + TEST("movw lr, #0xffff") + TEST_UNSUPPORTED(".short 0xf240,0x0d00 @ movw sp, #0") + TEST_UNSUPPORTED(".short 0xf240,0x0f00 @ movw pc, #0") + + TEST_R("movt r",0, VAL1,", #0") + TEST_R("movt r",0, VAL2,", #0xffff") + TEST_R("movt r",14,VAL1,", #0xffff") + TEST_UNSUPPORTED(".short 0xf2c0,0x0d00 @ movt sp, #0") + TEST_UNSUPPORTED(".short 0xf2c0,0x0f00 @ movt pc, #0") + + TEST_R( "ssat r0, #24, r",0, VAL1,"") + TEST_R( "ssat r14, #24, r",12, VAL2,"") + TEST_R( "ssat r0, #24, r",0, VAL1,", lsl #8") + TEST_R( "ssat r14, #24, r",12, VAL2,", asr #8") + TEST_UNSUPPORTED(".short 0xf30c,0x0d17 @ ssat sp, #24, r12") + TEST_UNSUPPORTED(".short 0xf30c,0x0f17 @ ssat pc, #24, r12") + TEST_UNSUPPORTED(".short 0xf30d,0x0c17 @ ssat r12, #24, sp") + TEST_UNSUPPORTED(".short 0xf30f,0x0c17 @ ssat r12, #24, pc") + + TEST_R( "usat r0, #24, r",0, VAL1,"") + TEST_R( "usat r14, #24, r",12, VAL2,"") + TEST_R( "usat r0, #24, r",0, VAL1,", lsl #8") + TEST_R( "usat r14, #24, r",12, VAL2,", asr #8") + TEST_UNSUPPORTED(".short 0xf38c,0x0d17 @ usat sp, #24, r12") + TEST_UNSUPPORTED(".short 0xf38c,0x0f17 @ usat pc, #24, r12") + TEST_UNSUPPORTED(".short 0xf38d,0x0c17 @ usat r12, #24, sp") + TEST_UNSUPPORTED(".short 0xf38f,0x0c17 @ usat r12, #24, pc") + + TEST_R( "ssat16 r0, #12, r",0, HH1,"") + TEST_R( "ssat16 r14, #12, r",12, HH2,"") + TEST_UNSUPPORTED(".short 0xf32c,0x0d0b @ ssat16 sp, #12, r12") + TEST_UNSUPPORTED(".short 0xf32c,0x0f0b @ ssat16 pc, #12, r12") + TEST_UNSUPPORTED(".short 0xf32d,0x0c0b @ ssat16 r12, #12, sp") + TEST_UNSUPPORTED(".short 0xf32f,0x0c0b @ ssat16 r12, #12, pc") + + TEST_R( "usat16 r0, #12, r",0, HH1,"") + TEST_R( "usat16 r14, #12, r",12, HH2,"") + TEST_UNSUPPORTED(".short 0xf3ac,0x0d0b @ usat16 sp, #12, r12") + TEST_UNSUPPORTED(".short 0xf3ac,0x0f0b @ usat16 pc, #12, r12") + TEST_UNSUPPORTED(".short 0xf3ad,0x0c0b @ usat16 r12, #12, sp") + TEST_UNSUPPORTED(".short 0xf3af,0x0c0b @ usat16 r12, #12, pc") + + TEST_R( "sbfx r0, r",0 , VAL1,", #0, #31") + TEST_R( "sbfx r14, r",12, VAL2,", #8, #16") + TEST_R( "sbfx r4, r",10, VAL1,", #16, #15") + TEST_UNSUPPORTED(".short 0xf34c,0x2d0f @ sbfx sp, r12, #8, #16") + TEST_UNSUPPORTED(".short 0xf34c,0x2f0f @ sbfx pc, r12, #8, #16") + TEST_UNSUPPORTED(".short 0xf34d,0x2c0f @ sbfx r12, sp, #8, #16") + TEST_UNSUPPORTED(".short 0xf34f,0x2c0f @ sbfx r12, pc, #8, #16") + + TEST_R( "ubfx r0, r",0 , VAL1,", #0, #31") + TEST_R( "ubfx r14, r",12, VAL2,", #8, #16") + TEST_R( "ubfx r4, r",10, VAL1,", #16, #15") + TEST_UNSUPPORTED(".short 0xf3cc,0x2d0f @ ubfx sp, r12, #8, #16") + TEST_UNSUPPORTED(".short 0xf3cc,0x2f0f @ ubfx pc, r12, #8, #16") + TEST_UNSUPPORTED(".short 0xf3cd,0x2c0f @ ubfx r12, sp, #8, #16") + TEST_UNSUPPORTED(".short 0xf3cf,0x2c0f @ ubfx r12, pc, #8, #16") + + TEST_R( "bfc r",0, VAL1,", #4, #20") + TEST_R( "bfc r",14,VAL2,", #4, #20") + TEST_R( "bfc r",7, VAL1,", #0, #31") + TEST_R( "bfc r",8, VAL2,", #0, #31") + TEST_UNSUPPORTED(".short 0xf36f,0x0d1e @ bfc sp, #0, #31") + TEST_UNSUPPORTED(".short 0xf36f,0x0f1e @ bfc pc, #0, #31") + + TEST_RR( "bfi r",0, VAL1,", r",0 , VAL2,", #0, #31") + TEST_RR( "bfi r",12,VAL1,", r",14 , VAL2,", #4, #20") + TEST_UNSUPPORTED(".short 0xf36e,0x1d17 @ bfi sp, r14, #4, #20") + TEST_UNSUPPORTED(".short 0xf36e,0x1f17 @ bfi pc, r14, #4, #20") + TEST_UNSUPPORTED(".short 0xf36d,0x1e17 @ bfi r14, sp, #4, #20") + + TEST_GROUP("Branches and miscellaneous control") + +CONDITION_INSTRUCTIONS(22, + TEST_BF("beq.w 2f") + TEST_BB("bne.w 2b") + TEST_BF("bgt.w 2f") + TEST_BB("blt.w 2b") + TEST_BF_X("bpl.w 2f",0x1000) +) + + TEST_UNSUPPORTED("msr cpsr, r0") + TEST_UNSUPPORTED("msr cpsr_f, r1") + TEST_UNSUPPORTED("msr spsr, r2") + + TEST_UNSUPPORTED("cpsie.w i") + TEST_UNSUPPORTED("cpsid.w i") + TEST_UNSUPPORTED("cps 0x13") + + TEST_SUPPORTED("yield.w") + TEST("sev.w") + TEST("nop.w") + TEST("wfi.w") + TEST_SUPPORTED("wfe.w") + TEST_UNSUPPORTED("dbg.w #0") + + TEST_UNSUPPORTED("clrex") + TEST_UNSUPPORTED("dsb") + TEST_UNSUPPORTED("dmb") + TEST_UNSUPPORTED("isb") + + TEST_UNSUPPORTED("bxj r0") + + TEST_UNSUPPORTED("subs pc, lr, #4") + + TEST("mrs r0, cpsr") + TEST("mrs r14, cpsr") + TEST_UNSUPPORTED(".short 0xf3ef,0x8d00 @ mrs sp, spsr") + TEST_UNSUPPORTED(".short 0xf3ef,0x8f00 @ mrs pc, spsr") + TEST_UNSUPPORTED("mrs r0, spsr") + TEST_UNSUPPORTED("mrs lr, spsr") + + TEST_UNSUPPORTED(".short 0xf7f0,0x8000 @ smc #0") + + TEST_UNSUPPORTED(".short 0xf7f0,0xa000 @ undefeined") + + TEST_BF( "b.w 2f") + TEST_BB( "b.w 2b") + TEST_BF_X("b.w 2f", 0x1000) + + TEST_BF( "bl.w 2f") + TEST_BB( "bl.w 2b") + TEST_BB_X("bl.w 2b", 0x1000) + + TEST_X( "blx __dummy_arm_subroutine", + ".arm \n\t" + ".align \n\t" + ".type __dummy_arm_subroutine, %%function \n\t" + "__dummy_arm_subroutine: \n\t" + "mov r0, pc \n\t" + "bx lr \n\t" + ".thumb \n\t" + ) + TEST( "blx __dummy_arm_subroutine") + + TEST_GROUP("Store single data item") + +#define SINGLE_STORE(size) \ + TEST_RP( "str"size" r",0, VAL1,", [r",11,-1024,", #1024]") \ + TEST_RP( "str"size" r",14,VAL2,", [r",1, -1024,", #1080]") \ + TEST_RP( "str"size" r",0, VAL1,", [r",11,256, ", #-120]") \ + TEST_RP( "str"size" r",14,VAL2,", [r",1, 256, ", #-128]") \ + TEST_RP( "str"size" r",0, VAL1,", [r",11,24, "], #120") \ + TEST_RP( "str"size" r",14,VAL2,", [r",1, 24, "], #128") \ + TEST_RP( "str"size" r",0, VAL1,", [r",11,24, "], #-120") \ + TEST_RP( "str"size" r",14,VAL2,", [r",1, 24, "], #-128") \ + TEST_RP( "str"size" r",0, VAL1,", [r",11,24, ", #120]!") \ + TEST_RP( "str"size" r",14,VAL2,", [r",1, 24, ", #128]!") \ + TEST_RP( "str"size" r",0, VAL1,", [r",11,256, ", #-120]!") \ + TEST_RP( "str"size" r",14,VAL2,", [r",1, 256, ", #-128]!") \ + TEST_RPR("str"size".w r",0, VAL1,", [r",1, 0,", r",2, 4,"]") \ + TEST_RPR("str"size" r",14,VAL2,", [r",10,0,", r",11,4,", lsl #1]") \ + TEST_R( "str"size".w r",7, VAL1,", [sp, #24]") \ + TEST_RP( "str"size".w r",0, VAL2,", [r",0,0, "]") \ + TEST_UNSUPPORTED("str"size"t r0, [r1, #4]") + + SINGLE_STORE("b") + SINGLE_STORE("h") + SINGLE_STORE("") + + TEST("str sp, [sp]") + TEST_UNSUPPORTED(".short 0xf8cf,0xe000 @ str r14, [pc]") + TEST_UNSUPPORTED(".short 0xf8ce,0xf000 @ str pc, [r14]") + + TEST_GROUP("Advanced SIMD element or structure load/store instructions") + + TEST_UNSUPPORTED(".short 0xf900,0x0000") + TEST_UNSUPPORTED(".short 0xf92f,0xffff") + TEST_UNSUPPORTED(".short 0xf980,0x0000") + TEST_UNSUPPORTED(".short 0xf9ef,0xffff") + + TEST_GROUP("Load single data item and memory hints") + +#define SINGLE_LOAD(size) \ + TEST_P( "ldr"size" r0, [r",11,-1024, ", #1024]") \ + TEST_P( "ldr"size" r14, [r",1, -1024,", #1080]") \ + TEST_P( "ldr"size" r0, [r",11,256, ", #-120]") \ + TEST_P( "ldr"size" r14, [r",1, 256, ", #-128]") \ + TEST_P( "ldr"size" r0, [r",11,24, "], #120") \ + TEST_P( "ldr"size" r14, [r",1, 24, "], #128") \ + TEST_P( "ldr"size" r0, [r",11,24, "], #-120") \ + TEST_P( "ldr"size" r14, [r",1,24, "], #-128") \ + TEST_P( "ldr"size" r0, [r",11,24, ", #120]!") \ + TEST_P( "ldr"size" r14, [r",1, 24, ", #128]!") \ + TEST_P( "ldr"size" r0, [r",11,256, ", #-120]!") \ + TEST_P( "ldr"size" r14, [r",1, 256, ", #-128]!") \ + TEST_PR("ldr"size".w r0, [r",1, 0,", r",2, 4,"]") \ + TEST_PR("ldr"size" r14, [r",10,0,", r",11,4,", lsl #1]") \ + TEST_X( "ldr"size".w r0, 3f", \ + ".align 3 \n\t" \ + "3: .word "__stringify(VAL1)) \ + TEST_X( "ldr"size".w r14, 3f", \ + ".align 3 \n\t" \ + "3: .word "__stringify(VAL2)) \ + TEST( "ldr"size".w r7, 3b") \ + TEST( "ldr"size".w r7, [sp, #24]") \ + TEST_P( "ldr"size".w r0, [r",0,0, "]") \ + TEST_UNSUPPORTED("ldr"size"t r0, [r1, #4]") + + SINGLE_LOAD("b") + SINGLE_LOAD("sb") + SINGLE_LOAD("h") + SINGLE_LOAD("sh") + SINGLE_LOAD("") + + TEST_BF_P("ldr pc, [r",14, 15*4,"]") + TEST_P( "ldr sp, [r",14, 13*4,"]") + TEST_BF_R("ldr pc, [sp, r",14, 15*4,"]") + TEST_R( "ldr sp, [sp, r",14, 13*4,"]") + TEST_THUMB_TO_ARM_INTERWORK_P("ldr pc, [r",0,0,", #15*4]") + TEST_SUPPORTED("ldr sp, 99f") + TEST_SUPPORTED("ldr pc, 99f") + + TEST_UNSUPPORTED(".short 0xf854,0x700d @ ldr r7, [r4, sp]") + TEST_UNSUPPORTED(".short 0xf854,0x700f @ ldr r7, [r4, pc]") + TEST_UNSUPPORTED(".short 0xf814,0x700d @ ldrb r7, [r4, sp]") + TEST_UNSUPPORTED(".short 0xf814,0x700f @ ldrb r7, [r4, pc]") + TEST_UNSUPPORTED(".short 0xf89f,0xd004 @ ldrb sp, 99f") + TEST_UNSUPPORTED(".short 0xf814,0xd008 @ ldrb sp, [r4, r8]") + TEST_UNSUPPORTED(".short 0xf894,0xd000 @ ldrb sp, [r4]") + + TEST_UNSUPPORTED(".short 0xf860,0x0000") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xf9ff,0xffff") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xf950,0x0000") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xf95f,0xffff") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xf800,0x0800") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xf97f,0xfaff") /* Unallocated space */ + + TEST( "pli [pc, #4]") + TEST( "pli [pc, #-4]") + TEST( "pld [pc, #4]") + TEST( "pld [pc, #-4]") + + TEST_P( "pld [r",0,-1024,", #1024]") + TEST( ".short 0xf8b0,0xf400 @ pldw [r0, #1024]") + TEST_P( "pli [r",4, 0b,", #1024]") + TEST_P( "pld [r",7, 120,", #-120]") + TEST( ".short 0xf837,0xfc78 @ pldw [r7, #-120]") + TEST_P( "pli [r",11,120,", #-120]") + TEST( "pld [sp, #0]") + + TEST_PR("pld [r",7, 24, ", r",0, 16,"]") + TEST_PR("pld [r",8, 24, ", r",12,16,", lsl #3]") + TEST_SUPPORTED(".short 0xf837,0xf000 @ pldw [r7, r0]") + TEST_SUPPORTED(".short 0xf838,0xf03c @ pldw [r8, r12, lsl #3]"); + TEST_RR("pli [r",12,0b,", r",0, 16,"]") + TEST_RR("pli [r",0, 0b,", r",12,16,", lsl #3]") + TEST_R( "pld [sp, r",1, 16,"]") + TEST_UNSUPPORTED(".short 0xf817,0xf00d @pld [r7, sp]") + TEST_UNSUPPORTED(".short 0xf817,0xf00f @pld [r7, pc]") + + TEST_GROUP("Data-processing (register)") + +#define SHIFTS32(op) \ + TEST_RR(op" r0, r",1, VAL1,", r",2, 3, "") \ + TEST_RR(op" r14, r",12,VAL2,", r",11,10,"") + + SHIFTS32("lsl") + SHIFTS32("lsls") + SHIFTS32("lsr") + SHIFTS32("lsrs") + SHIFTS32("asr") + SHIFTS32("asrs") + SHIFTS32("ror") + SHIFTS32("rors") + + TEST_UNSUPPORTED(".short 0xfa01,0xff02 @ lsl pc, r1, r2") + TEST_UNSUPPORTED(".short 0xfa01,0xfd02 @ lsl sp, r1, r2") + TEST_UNSUPPORTED(".short 0xfa0f,0xf002 @ lsl r0, pc, r2") + TEST_UNSUPPORTED(".short 0xfa0d,0xf002 @ lsl r0, sp, r2") + TEST_UNSUPPORTED(".short 0xfa01,0xf00f @ lsl r0, r1, pc") + TEST_UNSUPPORTED(".short 0xfa01,0xf00d @ lsl r0, r1, sp") + + TEST_RR( "sxtah r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "sxtah r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "sxth r8, r",7, HH1,"") + + TEST_UNSUPPORTED(".short 0xfa0f,0xff87 @ sxth pc, r7"); + TEST_UNSUPPORTED(".short 0xfa0f,0xfd87 @ sxth sp, r7"); + TEST_UNSUPPORTED(".short 0xfa0f,0xf88f @ sxth r8, pc"); + TEST_UNSUPPORTED(".short 0xfa0f,0xf88d @ sxth r8, sp"); + + TEST_RR( "uxtah r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uxtah r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "uxth r8, r",7, HH1,"") + + TEST_RR( "sxtab16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "sxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "sxtb16 r8, r",7, HH1,"") + + TEST_RR( "uxtab16 r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "uxtb16 r8, r",7, HH1,"") + + TEST_RR( "sxtab r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "sxtab r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "sxtb r8, r",7, HH1,"") + + TEST_RR( "uxtab r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "uxtab r14,r",12, HH2,", r",10,HH1,", ror #8") + TEST_R( "uxtb r8, r",7, HH1,"") + + TEST_UNSUPPORTED(".short 0xfa60,0x00f0") + TEST_UNSUPPORTED(".short 0xfa7f,0xffff") + +#define PARALLEL_ADD_SUB(op) \ + TEST_RR( op"add16 r0, r",0, HH1,", r",1, HH2,"") \ + TEST_RR( op"add16 r14, r",12,HH2,", r",10,HH1,"") \ + TEST_RR( op"asx r0, r",0, HH1,", r",1, HH2,"") \ + TEST_RR( op"asx r14, r",12,HH2,", r",10,HH1,"") \ + TEST_RR( op"sax r0, r",0, HH1,", r",1, HH2,"") \ + TEST_RR( op"sax r14, r",12,HH2,", r",10,HH1,"") \ + TEST_RR( op"sub16 r0, r",0, HH1,", r",1, HH2,"") \ + TEST_RR( op"sub16 r14, r",12,HH2,", r",10,HH1,"") \ + TEST_RR( op"add8 r0, r",0, HH1,", r",1, HH2,"") \ + TEST_RR( op"add8 r14, r",12,HH2,", r",10,HH1,"") \ + TEST_RR( op"sub8 r0, r",0, HH1,", r",1, HH2,"") \ + TEST_RR( op"sub8 r14, r",12,HH2,", r",10,HH1,"") + + TEST_GROUP("Parallel addition and subtraction, signed") + + PARALLEL_ADD_SUB("s") + PARALLEL_ADD_SUB("q") + PARALLEL_ADD_SUB("sh") + + TEST_GROUP("Parallel addition and subtraction, unsigned") + + PARALLEL_ADD_SUB("u") + PARALLEL_ADD_SUB("uq") + PARALLEL_ADD_SUB("uh") + + TEST_GROUP("Miscellaneous operations") + + TEST_RR("qadd r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR("qadd lr, r",9, VAL2,", r",8, VAL1,"") + TEST_RR("qsub r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR("qsub lr, r",9, VAL2,", r",8, VAL1,"") + TEST_RR("qdadd r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR("qdadd lr, r",9, VAL2,", r",8, VAL1,"") + TEST_RR("qdsub r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR("qdsub lr, r",9, VAL2,", r",8, VAL1,"") + + TEST_R("rev.w r0, r",0, VAL1,"") + TEST_R("rev r14, r",12, VAL2,"") + TEST_R("rev16.w r0, r",0, VAL1,"") + TEST_R("rev16 r14, r",12, VAL2,"") + TEST_R("rbit r0, r",0, VAL1,"") + TEST_R("rbit r14, r",12, VAL2,"") + TEST_R("revsh.w r0, r",0, VAL1,"") + TEST_R("revsh r14, r",12, VAL2,"") + + TEST_UNSUPPORTED(".short 0xfa9c,0xff8c @ rev pc, r12"); + TEST_UNSUPPORTED(".short 0xfa9c,0xfd8c @ rev sp, r12"); + TEST_UNSUPPORTED(".short 0xfa9f,0xfe8f @ rev r14, pc"); + TEST_UNSUPPORTED(".short 0xfa9d,0xfe8d @ rev r14, sp"); + + TEST_RR("sel r0, r",0, VAL1,", r",1, VAL2,"") + TEST_RR("sel r14, r",12,VAL1,", r",10, VAL2,"") + + TEST_R("clz r0, r",0, 0x0,"") + TEST_R("clz r7, r",14,0x1,"") + TEST_R("clz lr, r",7, 0xffffffff,"") + + TEST_UNSUPPORTED(".short 0xfa80,0xf030") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xfaff,0xff7f") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xfab0,0xf000") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xfaff,0xff7f") /* Unallocated space */ + + TEST_GROUP("Multiply, multiply accumulate, and absolute difference operations") + + TEST_RR( "mul r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "mul r7, r",8, VAL2,", r",9, VAL2,"") + TEST_UNSUPPORTED(".short 0xfb08,0xff09 @ mul pc, r8, r9") + TEST_UNSUPPORTED(".short 0xfb08,0xfd09 @ mul sp, r8, r9") + TEST_UNSUPPORTED(".short 0xfb0f,0xf709 @ mul r7, pc, r9") + TEST_UNSUPPORTED(".short 0xfb0d,0xf709 @ mul r7, sp, r9") + TEST_UNSUPPORTED(".short 0xfb08,0xf70f @ mul r7, r8, pc") + TEST_UNSUPPORTED(".short 0xfb08,0xf70d @ mul r7, r8, sp") + + TEST_RRR( "mla r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "mla r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_UNSUPPORTED(".short 0xfb08,0xaf09 @ mla pc, r8, r9, r10"); + TEST_UNSUPPORTED(".short 0xfb08,0xad09 @ mla sp, r8, r9, r10"); + TEST_UNSUPPORTED(".short 0xfb0f,0xa709 @ mla r7, pc, r9, r10"); + TEST_UNSUPPORTED(".short 0xfb0d,0xa709 @ mla r7, sp, r9, r10"); + TEST_UNSUPPORTED(".short 0xfb08,0xa70f @ mla r7, r8, pc, r10"); + TEST_UNSUPPORTED(".short 0xfb08,0xa70d @ mla r7, r8, sp, r10"); + TEST_UNSUPPORTED(".short 0xfb08,0xd709 @ mla r7, r8, r9, sp"); + + TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "mls r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + + TEST_RRR( "smlabb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlabb r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RRR( "smlatb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlatb r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RRR( "smlabt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlabt r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RRR( "smlatt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlatt r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RR( "smulbb r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smulbb r7, r",8, VAL3,", r",9, VAL1,"") + TEST_RR( "smultb r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smultb r7, r",8, VAL3,", r",9, VAL1,"") + TEST_RR( "smulbt r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smulbt r7, r",8, VAL3,", r",9, VAL1,"") + TEST_RR( "smultt r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smultt r7, r",8, VAL3,", r",9, VAL1,"") + + TEST_RRR( "smlad r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"") + TEST_RRR( "smlad r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"") + TEST_RRR( "smladx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"") + TEST_RRR( "smladx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"") + TEST_RR( "smuad r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "smuad r14, r",12,HH2,", r",10,HH1,"") + TEST_RR( "smuadx r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "smuadx r14, r",12,HH2,", r",10,HH1,"") + + TEST_RRR( "smlawb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlawb r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RRR( "smlawt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") + TEST_RRR( "smlawt r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") + TEST_RR( "smulwb r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smulwb r7, r",8, VAL3,", r",9, VAL1,"") + TEST_RR( "smulwt r0, r",1, VAL1,", r",2, VAL2,"") + TEST_RR( "smulwt r7, r",8, VAL3,", r",9, VAL1,"") + + TEST_RRR( "smlsd r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"") + TEST_RRR( "smlsd r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"") + TEST_RRR( "smlsdx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"") + TEST_RRR( "smlsdx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"") + TEST_RR( "smusd r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "smusd r14, r",12,HH2,", r",10,HH1,"") + TEST_RR( "smusdx r0, r",0, HH1,", r",1, HH2,"") + TEST_RR( "smusdx r14, r",12,HH2,", r",10,HH1,"") + + TEST_RRR( "smmla r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"") + TEST_RRR( "smmla r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"") + TEST_RRR( "smmlar r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"") + TEST_RRR( "smmlar r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"") + TEST_RR( "smmul r0, r",0, VAL1,", r",1, VAL2,"") + TEST_RR( "smmul r14, r",12,VAL2,", r",10,VAL1,"") + TEST_RR( "smmulr r0, r",0, VAL1,", r",1, VAL2,"") + TEST_RR( "smmulr r14, r",12,VAL2,", r",10,VAL1,"") + + TEST_RRR( "smmls r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"") + TEST_RRR( "smmls r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"") + TEST_RRR( "smmlsr r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"") + TEST_RRR( "smmlsr r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"") + + TEST_RRR( "usada8 r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL3,"") + TEST_RRR( "usada8 r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL3,"") + TEST_RR( "usad8 r0, r",0, VAL1,", r",1, VAL2,"") + TEST_RR( "usad8 r14, r",12,VAL2,", r",10,VAL1,"") + + TEST_UNSUPPORTED(".short 0xfb00,0xf010") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xfb0f,0xff1f") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xfb70,0xf010") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xfb7f,0xff1f") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xfb70,0x0010") /* Unallocated space */ + TEST_UNSUPPORTED(".short 0xfb7f,0xff1f") /* Unallocated space */ + + TEST_GROUP("Long multiply, long multiply accumulate, and divide") + + TEST_RR( "smull r0, r1, r",2, VAL1,", r",3, VAL2,"") + TEST_RR( "smull r7, r8, r",9, VAL2,", r",10, VAL1,"") + TEST_UNSUPPORTED(".short 0xfb89,0xf80a @ smull pc, r8, r9, r10"); + TEST_UNSUPPORTED(".short 0xfb89,0xd80a @ smull sp, r8, r9, r10"); + TEST_UNSUPPORTED(".short 0xfb89,0x7f0a @ smull r7, pc, r9, r10"); + TEST_UNSUPPORTED(".short 0xfb89,0x7d0a @ smull r7, sp, r9, r10"); + TEST_UNSUPPORTED(".short 0xfb8f,0x780a @ smull r7, r8, pc, r10"); + TEST_UNSUPPORTED(".short 0xfb8d,0x780a @ smull r7, r8, sp, r10"); + TEST_UNSUPPORTED(".short 0xfb89,0x780f @ smull r7, r8, r9, pc"); + TEST_UNSUPPORTED(".short 0xfb89,0x780d @ smull r7, r8, r9, sp"); + + TEST_RR( "umull r0, r1, r",2, VAL1,", r",3, VAL2,"") + TEST_RR( "umull r7, r8, r",9, VAL2,", r",10, VAL1,"") + + TEST_RRRR( "smlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "smlal r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + + TEST_RRRR( "smlalbb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "smlalbb r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRRR( "smlalbt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "smlalbt r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRRR( "smlaltb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "smlaltb r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRRR( "smlaltt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "smlaltt r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + + TEST_RRRR( "smlald r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2) + TEST_RRRR( "smlald r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1) + TEST_RRRR( "smlaldx r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2) + TEST_RRRR( "smlaldx r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1) + + TEST_RRRR( "smlsld r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2) + TEST_RRRR( "smlsld r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1) + TEST_RRRR( "smlsldx r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2) + TEST_RRRR( "smlsldx r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1) + + TEST_RRRR( "umlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "umlal r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + TEST_RRRR( "umaal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4) + TEST_RRRR( "umaal r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3) + + TEST_GROUP("Coprocessor instructions") + + TEST_UNSUPPORTED(".short 0xfc00,0x0000") + TEST_UNSUPPORTED(".short 0xffff,0xffff") + + TEST_GROUP("Testing instructions in IT blocks") + + TEST_ITBLOCK("sub.w r0, r0") + + verbose("\n"); +} + diff --git a/arch/arm/kernel/kprobes-test.c b/arch/arm/kernel/kprobes-test.c new file mode 100644 index 00000000000..e17cdd6d90d --- /dev/null +++ b/arch/arm/kernel/kprobes-test.c @@ -0,0 +1,1748 @@ +/* + * arch/arm/kernel/kprobes-test.c + * + * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * This file contains test code for ARM kprobes. + * + * The top level function run_all_tests() executes tests for all of the + * supported instruction sets: ARM, 16-bit Thumb, and 32-bit Thumb. These tests + * fall into two categories; run_api_tests() checks basic functionality of the + * kprobes API, and run_test_cases() is a comprehensive test for kprobes + * instruction decoding and simulation. + * + * run_test_cases() first checks the kprobes decoding table for self consistency + * (using table_test()) then executes a series of test cases for each of the CPU + * instruction forms. coverage_start() and coverage_end() are used to verify + * that these test cases cover all of the possible combinations of instructions + * described by the kprobes decoding tables. + * + * The individual test cases are in kprobes-test-arm.c and kprobes-test-thumb.c + * which use the macros defined in kprobes-test.h. The rest of this + * documentation will describe the operation of the framework used by these + * test cases. + */ + +/* + * TESTING METHODOLOGY + * ------------------- + * + * The methodology used to test an ARM instruction 'test_insn' is to use + * inline assembler like: + * + * test_before: nop + * test_case: test_insn + * test_after: nop + * + * When the test case is run a kprobe is placed of each nop. The + * post-handler of the test_before probe is used to modify the saved CPU + * register context to that which we require for the test case. The + * pre-handler of the of the test_after probe saves a copy of the CPU + * register context. In this way we can execute test_insn with a specific + * register context and see the results afterwards. + * + * To actually test the kprobes instruction emulation we perform the above + * step a second time but with an additional kprobe on the test_case + * instruction itself. If the emulation is accurate then the results seen + * by the test_after probe will be identical to the first run which didn't + * have a probe on test_case. + * + * Each test case is run several times with a variety of variations in the + * flags value of stored in CPSR, and for Thumb code, different ITState. + * + * For instructions which can modify PC, a second test_after probe is used + * like this: + * + * test_before: nop + * test_case: test_insn + * test_after: nop + * b test_done + * test_after2: nop + * test_done: + * + * The test case is constructed such that test_insn branches to + * test_after2, or, if testing a conditional instruction, it may just + * continue to test_after. The probes inserted at both locations let us + * determine which happened. A similar approach is used for testing + * backwards branches... + * + * b test_before + * b test_done @ helps to cope with off by 1 branches + * test_after2: nop + * b test_done + * test_before: nop + * test_case: test_insn + * test_after: nop + * test_done: + * + * The macros used to generate the assembler instructions describe above + * are TEST_INSTRUCTION, TEST_BRANCH_F (branch forwards) and TEST_BRANCH_B + * (branch backwards). In these, the local variables numbered 1, 50, 2 and + * 99 represent: test_before, test_case, test_after2 and test_done. + * + * FRAMEWORK + * --------- + * + * Each test case is wrapped between the pair of macros TESTCASE_START and + * TESTCASE_END. As well as performing the inline assembler boilerplate, + * these call out to the kprobes_test_case_start() and + * kprobes_test_case_end() functions which drive the execution of the test + * case. The specific arguments to use for each test case are stored as + * inline data constructed using the various TEST_ARG_* macros. Putting + * this all together, a simple test case may look like: + * + * TESTCASE_START("Testing mov r0, r7") + * TEST_ARG_REG(7, 0x12345678) // Set r7=0x12345678 + * TEST_ARG_END("") + * TEST_INSTRUCTION("mov r0, r7") + * TESTCASE_END + * + * Note, in practice the single convenience macro TEST_R would be used for this + * instead. + * + * The above would expand to assembler looking something like: + * + * @ TESTCASE_START + * bl __kprobes_test_case_start + * @ start of inline data... + * .ascii "mov r0, r7" @ text title for test case + * .byte 0 + * .align 2 + * + * @ TEST_ARG_REG + * .byte ARG_TYPE_REG + * .byte 7 + * .short 0 + * .word 0x1234567 + * + * @ TEST_ARG_END + * .byte ARG_TYPE_END + * .byte TEST_ISA @ flags, including ISA being tested + * .short 50f-0f @ offset of 'test_before' + * .short 2f-0f @ offset of 'test_after2' (if relevent) + * .short 99f-0f @ offset of 'test_done' + * @ start of test case code... + * 0: + * .code TEST_ISA @ switch to ISA being tested + * + * @ TEST_INSTRUCTION + * 50: nop @ location for 'test_before' probe + * 1: mov r0, r7 @ the test case instruction 'test_insn' + * nop @ location for 'test_after' probe + * + * // TESTCASE_END + * 2: + * 99: bl __kprobes_test_case_end_##TEST_ISA + * .code NONMAL_ISA + * + * When the above is execute the following happens... + * + * __kprobes_test_case_start() is an assembler wrapper which sets up space + * for a stack buffer and calls the C function kprobes_test_case_start(). + * This C function will do some initial processing of the inline data and + * setup some global state. It then inserts the test_before and test_after + * kprobes and returns a value which causes the assembler wrapper to jump + * to the start of the test case code, (local label '0'). + * + * When the test case code executes, the test_before probe will be hit and + * test_before_post_handler will call setup_test_context(). This fills the + * stack buffer and CPU registers with a test pattern and then processes + * the test case arguments. In our example there is one TEST_ARG_REG which + * indicates that R7 should be loaded with the value 0x12345678. + * + * When the test_before probe ends, the test case continues and executes + * the "mov r0, r7" instruction. It then hits the test_after probe and the + * pre-handler for this (test_after_pre_handler) will save a copy of the + * CPU register context. This should now have R0 holding the same value as + * R7. + * + * Finally we get to the call to __kprobes_test_case_end_{32,16}. This is + * an assembler wrapper which switches back to the ISA used by the test + * code and calls the C function kprobes_test_case_end(). + * + * For each run through the test case, test_case_run_count is incremented + * by one. For even runs, kprobes_test_case_end() saves a copy of the + * register and stack buffer contents from the test case just run. It then + * inserts a kprobe on the test case instruction 'test_insn' and returns a + * value to cause the test case code to be re-run. + * + * For odd numbered runs, kprobes_test_case_end() compares the register and + * stack buffer contents to those that were saved on the previous even + * numbered run (the one without the kprobe on test_insn). These should be + * the same if the kprobe instruction simulation routine is correct. + * + * The pair of test case runs is repeated with different combinations of + * flag values in CPSR and, for Thumb, different ITState. This is + * controlled by test_context_cpsr(). + * + * BUILDING TEST CASES + * ------------------- + * + * + * As an aid to building test cases, the stack buffer is initialised with + * some special values: + * + * [SP+13*4] Contains SP+120. This can be used to test instructions + * which load a value into SP. + * + * [SP+15*4] When testing branching instructions using TEST_BRANCH_{F,B}, + * this holds the target address of the branch, 'test_after2'. + * This can be used to test instructions which load a PC value + * from memory. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/kprobes.h> + +#include "kprobes.h" +#include "kprobes-test.h" + + +#define BENCHMARKING 1 + + +/* + * Test basic API + */ + +static bool test_regs_ok; +static int test_func_instance; +static int pre_handler_called; +static int post_handler_called; +static int jprobe_func_called; +static int kretprobe_handler_called; + +#define FUNC_ARG1 0x12345678 +#define FUNC_ARG2 0xabcdef + + +#ifndef CONFIG_THUMB2_KERNEL + +long arm_func(long r0, long r1); + +static void __used __naked __arm_kprobes_test_func(void) +{ + __asm__ __volatile__ ( + ".arm \n\t" + ".type arm_func, %%function \n\t" + "arm_func: \n\t" + "adds r0, r0, r1 \n\t" + "bx lr \n\t" + ".code "NORMAL_ISA /* Back to Thumb if necessary */ + : : : "r0", "r1", "cc" + ); +} + +#else /* CONFIG_THUMB2_KERNEL */ + +long thumb16_func(long r0, long r1); +long thumb32even_func(long r0, long r1); +long thumb32odd_func(long r0, long r1); + +static void __used __naked __thumb_kprobes_test_funcs(void) +{ + __asm__ __volatile__ ( + ".type thumb16_func, %%function \n\t" + "thumb16_func: \n\t" + "adds.n r0, r0, r1 \n\t" + "bx lr \n\t" + + ".align \n\t" + ".type thumb32even_func, %%function \n\t" + "thumb32even_func: \n\t" + "adds.w r0, r0, r1 \n\t" + "bx lr \n\t" + + ".align \n\t" + "nop.n \n\t" + ".type thumb32odd_func, %%function \n\t" + "thumb32odd_func: \n\t" + "adds.w r0, r0, r1 \n\t" + "bx lr \n\t" + + : : : "r0", "r1", "cc" + ); +} + +#endif /* CONFIG_THUMB2_KERNEL */ + + +static int call_test_func(long (*func)(long, long), bool check_test_regs) +{ + long ret; + + ++test_func_instance; + test_regs_ok = false; + + ret = (*func)(FUNC_ARG1, FUNC_ARG2); + if (ret != FUNC_ARG1 + FUNC_ARG2) { + pr_err("FAIL: call_test_func: func returned %lx\n", ret); + return false; + } + + if (check_test_regs && !test_regs_ok) { + pr_err("FAIL: test regs not OK\n"); + return false; + } + + return true; +} + +static int __kprobes pre_handler(struct kprobe *p, struct pt_regs *regs) +{ + pre_handler_called = test_func_instance; + if (regs->ARM_r0 == FUNC_ARG1 && regs->ARM_r1 == FUNC_ARG2) + test_regs_ok = true; + return 0; +} + +static void __kprobes post_handler(struct kprobe *p, struct pt_regs *regs, + unsigned long flags) +{ + post_handler_called = test_func_instance; + if (regs->ARM_r0 != FUNC_ARG1 + FUNC_ARG2 || regs->ARM_r1 != FUNC_ARG2) + test_regs_ok = false; +} + +static struct kprobe the_kprobe = { + .addr = 0, + .pre_handler = pre_handler, + .post_handler = post_handler +}; + +static int test_kprobe(long (*func)(long, long)) +{ + int ret; + + the_kprobe.addr = (kprobe_opcode_t *)func; + ret = register_kprobe(&the_kprobe); + if (ret < 0) { + pr_err("FAIL: register_kprobe failed with %d\n", ret); + return ret; + } + + ret = call_test_func(func, true); + + unregister_kprobe(&the_kprobe); + the_kprobe.flags = 0; /* Clear disable flag to allow reuse */ + + if (!ret) + return -EINVAL; + if (pre_handler_called != test_func_instance) { + pr_err("FAIL: kprobe pre_handler not called\n"); + return -EINVAL; + } + if (post_handler_called != test_func_instance) { + pr_err("FAIL: kprobe post_handler not called\n"); + return -EINVAL; + } + if (!call_test_func(func, false)) + return -EINVAL; + if (pre_handler_called == test_func_instance || + post_handler_called == test_func_instance) { + pr_err("FAIL: probe called after unregistering\n"); + return -EINVAL; + } + + return 0; +} + +static void __kprobes jprobe_func(long r0, long r1) +{ + jprobe_func_called = test_func_instance; + if (r0 == FUNC_ARG1 && r1 == FUNC_ARG2) + test_regs_ok = true; + jprobe_return(); +} + +static struct jprobe the_jprobe = { + .entry = jprobe_func, +}; + +static int test_jprobe(long (*func)(long, long)) +{ + int ret; + + the_jprobe.kp.addr = (kprobe_opcode_t *)func; + ret = register_jprobe(&the_jprobe); + if (ret < 0) { + pr_err("FAIL: register_jprobe failed with %d\n", ret); + return ret; + } + + ret = call_test_func(func, true); + + unregister_jprobe(&the_jprobe); + the_jprobe.kp.flags = 0; /* Clear disable flag to allow reuse */ + + if (!ret) + return -EINVAL; + if (jprobe_func_called != test_func_instance) { + pr_err("FAIL: jprobe handler function not called\n"); + return -EINVAL; + } + if (!call_test_func(func, false)) + return -EINVAL; + if (jprobe_func_called == test_func_instance) { + pr_err("FAIL: probe called after unregistering\n"); + return -EINVAL; + } + + return 0; +} + +static int __kprobes +kretprobe_handler(struct kretprobe_instance *ri, struct pt_regs *regs) +{ + kretprobe_handler_called = test_func_instance; + if (regs_return_value(regs) == FUNC_ARG1 + FUNC_ARG2) + test_regs_ok = true; + return 0; +} + +static struct kretprobe the_kretprobe = { + .handler = kretprobe_handler, +}; + +static int test_kretprobe(long (*func)(long, long)) +{ + int ret; + + the_kretprobe.kp.addr = (kprobe_opcode_t *)func; + ret = register_kretprobe(&the_kretprobe); + if (ret < 0) { + pr_err("FAIL: register_kretprobe failed with %d\n", ret); + return ret; + } + + ret = call_test_func(func, true); + + unregister_kretprobe(&the_kretprobe); + the_kretprobe.kp.flags = 0; /* Clear disable flag to allow reuse */ + + if (!ret) + return -EINVAL; + if (kretprobe_handler_called != test_func_instance) { + pr_err("FAIL: kretprobe handler not called\n"); + return -EINVAL; + } + if (!call_test_func(func, false)) + return -EINVAL; + if (jprobe_func_called == test_func_instance) { + pr_err("FAIL: kretprobe called after unregistering\n"); + return -EINVAL; + } + + return 0; +} + +static int run_api_tests(long (*func)(long, long)) +{ + int ret; + + pr_info(" kprobe\n"); + ret = test_kprobe(func); + if (ret < 0) + return ret; + + pr_info(" jprobe\n"); + ret = test_jprobe(func); + if (ret < 0) + return ret; + + pr_info(" kretprobe\n"); + ret = test_kretprobe(func); + if (ret < 0) + return ret; + + return 0; +} + + +/* + * Benchmarking + */ + +#if BENCHMARKING + +static void __naked benchmark_nop(void) +{ + __asm__ __volatile__ ( + "nop \n\t" + "bx lr" + ); +} + +#ifdef CONFIG_THUMB2_KERNEL +#define wide ".w" +#else +#define wide +#endif + +static void __naked benchmark_pushpop1(void) +{ + __asm__ __volatile__ ( + "stmdb"wide" sp!, {r3-r11,lr} \n\t" + "ldmia"wide" sp!, {r3-r11,pc}" + ); +} + +static void __naked benchmark_pushpop2(void) +{ + __asm__ __volatile__ ( + "stmdb"wide" sp!, {r0-r8,lr} \n\t" + "ldmia"wide" sp!, {r0-r8,pc}" + ); +} + +static void __naked benchmark_pushpop3(void) +{ + __asm__ __volatile__ ( + "stmdb"wide" sp!, {r4,lr} \n\t" + "ldmia"wide" sp!, {r4,pc}" + ); +} + +static void __naked benchmark_pushpop4(void) +{ + __asm__ __volatile__ ( + "stmdb"wide" sp!, {r0,lr} \n\t" + "ldmia"wide" sp!, {r0,pc}" + ); +} + + +#ifdef CONFIG_THUMB2_KERNEL + +static void __naked benchmark_pushpop_thumb(void) +{ + __asm__ __volatile__ ( + "push.n {r0-r7,lr} \n\t" + "pop.n {r0-r7,pc}" + ); +} + +#endif + +static int __kprobes +benchmark_pre_handler(struct kprobe *p, struct pt_regs *regs) +{ + return 0; +} + +static int benchmark(void(*fn)(void)) +{ + unsigned n, i, t, t0; + + for (n = 1000; ; n *= 2) { + t0 = sched_clock(); + for (i = n; i > 0; --i) + fn(); + t = sched_clock() - t0; + if (t >= 250000000) + break; /* Stop once we took more than 0.25 seconds */ + } + return t / n; /* Time for one iteration in nanoseconds */ +}; + +static int kprobe_benchmark(void(*fn)(void), unsigned offset) +{ + struct kprobe k = { + .addr = (kprobe_opcode_t *)((uintptr_t)fn + offset), + .pre_handler = benchmark_pre_handler, + }; + + int ret = register_kprobe(&k); + if (ret < 0) { + pr_err("FAIL: register_kprobe failed with %d\n", ret); + return ret; + } + + ret = benchmark(fn); + + unregister_kprobe(&k); + return ret; +}; + +struct benchmarks { + void (*fn)(void); + unsigned offset; + const char *title; +}; + +static int run_benchmarks(void) +{ + int ret; + struct benchmarks list[] = { + {&benchmark_nop, 0, "nop"}, + /* + * benchmark_pushpop{1,3} will have the optimised + * instruction emulation, whilst benchmark_pushpop{2,4} will + * be the equivalent unoptimised instructions. + */ + {&benchmark_pushpop1, 0, "stmdb sp!, {r3-r11,lr}"}, + {&benchmark_pushpop1, 4, "ldmia sp!, {r3-r11,pc}"}, + {&benchmark_pushpop2, 0, "stmdb sp!, {r0-r8,lr}"}, + {&benchmark_pushpop2, 4, "ldmia sp!, {r0-r8,pc}"}, + {&benchmark_pushpop3, 0, "stmdb sp!, {r4,lr}"}, + {&benchmark_pushpop3, 4, "ldmia sp!, {r4,pc}"}, + {&benchmark_pushpop4, 0, "stmdb sp!, {r0,lr}"}, + {&benchmark_pushpop4, 4, "ldmia sp!, {r0,pc}"}, +#ifdef CONFIG_THUMB2_KERNEL + {&benchmark_pushpop_thumb, 0, "push.n {r0-r7,lr}"}, + {&benchmark_pushpop_thumb, 2, "pop.n {r0-r7,pc}"}, +#endif + {0} + }; + + struct benchmarks *b; + for (b = list; b->fn; ++b) { + ret = kprobe_benchmark(b->fn, b->offset); + if (ret < 0) + return ret; + pr_info(" %dns for kprobe %s\n", ret, b->title); + } + + pr_info("\n"); + return 0; +} + +#endif /* BENCHMARKING */ + + +/* + * Decoding table self-consistency tests + */ + +static const int decode_struct_sizes[NUM_DECODE_TYPES] = { + [DECODE_TYPE_TABLE] = sizeof(struct decode_table), + [DECODE_TYPE_CUSTOM] = sizeof(struct decode_custom), + [DECODE_TYPE_SIMULATE] = sizeof(struct decode_simulate), + [DECODE_TYPE_EMULATE] = sizeof(struct decode_emulate), + [DECODE_TYPE_OR] = sizeof(struct decode_or), + [DECODE_TYPE_REJECT] = sizeof(struct decode_reject) +}; + +static int table_iter(const union decode_item *table, + int (*fn)(const struct decode_header *, void *), + void *args) +{ + const struct decode_header *h = (struct decode_header *)table; + int result; + + for (;;) { + enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK; + + if (type == DECODE_TYPE_END) + return 0; + + result = fn(h, args); + if (result) + return result; + + h = (struct decode_header *) + ((uintptr_t)h + decode_struct_sizes[type]); + + } +} + +static int table_test_fail(const struct decode_header *h, const char* message) +{ + + pr_err("FAIL: kprobes test failure \"%s\" (mask %08x, value %08x)\n", + message, h->mask.bits, h->value.bits); + return -EINVAL; +} + +struct table_test_args { + const union decode_item *root_table; + u32 parent_mask; + u32 parent_value; +}; + +static int table_test_fn(const struct decode_header *h, void *args) +{ + struct table_test_args *a = (struct table_test_args *)args; + enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK; + + if (h->value.bits & ~h->mask.bits) + return table_test_fail(h, "Match value has bits not in mask"); + + if ((h->mask.bits & a->parent_mask) != a->parent_mask) + return table_test_fail(h, "Mask has bits not in parent mask"); + + if ((h->value.bits ^ a->parent_value) & a->parent_mask) + return table_test_fail(h, "Value is inconsistent with parent"); + + if (type == DECODE_TYPE_TABLE) { + struct decode_table *d = (struct decode_table *)h; + struct table_test_args args2 = *a; + args2.parent_mask = h->mask.bits; + args2.parent_value = h->value.bits; + return table_iter(d->table.table, table_test_fn, &args2); + } + + return 0; +} + +static int table_test(const union decode_item *table) +{ + struct table_test_args args = { + .root_table = table, + .parent_mask = 0, + .parent_value = 0 + }; + return table_iter(args.root_table, table_test_fn, &args); +} + + +/* + * Decoding table test coverage analysis + * + * coverage_start() builds a coverage_table which contains a list of + * coverage_entry's to match each entry in the specified kprobes instruction + * decoding table. + * + * When test cases are run, coverage_add() is called to process each case. + * This looks up the corresponding entry in the coverage_table and sets it as + * being matched, as well as clearing the regs flag appropriate for the test. + * + * After all test cases have been run, coverage_end() is called to check that + * all entries in coverage_table have been matched and that all regs flags are + * cleared. I.e. that all possible combinations of instructions described by + * the kprobes decoding tables have had a test case executed for them. + */ + +bool coverage_fail; + +#define MAX_COVERAGE_ENTRIES 256 + +struct coverage_entry { + const struct decode_header *header; + unsigned regs; + unsigned nesting; + char matched; +}; + +struct coverage_table { + struct coverage_entry *base; + unsigned num_entries; + unsigned nesting; +}; + +struct coverage_table coverage; + +#define COVERAGE_ANY_REG (1<<0) +#define COVERAGE_SP (1<<1) +#define COVERAGE_PC (1<<2) +#define COVERAGE_PCWB (1<<3) + +static const char coverage_register_lookup[16] = { + [REG_TYPE_ANY] = COVERAGE_ANY_REG | COVERAGE_SP | COVERAGE_PC, + [REG_TYPE_SAMEAS16] = COVERAGE_ANY_REG, + [REG_TYPE_SP] = COVERAGE_SP, + [REG_TYPE_PC] = COVERAGE_PC, + [REG_TYPE_NOSP] = COVERAGE_ANY_REG | COVERAGE_SP, + [REG_TYPE_NOSPPC] = COVERAGE_ANY_REG | COVERAGE_SP | COVERAGE_PC, + [REG_TYPE_NOPC] = COVERAGE_ANY_REG | COVERAGE_PC, + [REG_TYPE_NOPCWB] = COVERAGE_ANY_REG | COVERAGE_PC | COVERAGE_PCWB, + [REG_TYPE_NOPCX] = COVERAGE_ANY_REG, + [REG_TYPE_NOSPPCX] = COVERAGE_ANY_REG | COVERAGE_SP, +}; + +unsigned coverage_start_registers(const struct decode_header *h) +{ + unsigned regs = 0; + int i; + for (i = 0; i < 20; i += 4) { + int r = (h->type_regs.bits >> (DECODE_TYPE_BITS + i)) & 0xf; + regs |= coverage_register_lookup[r] << i; + } + return regs; +} + +static int coverage_start_fn(const struct decode_header *h, void *args) +{ + struct coverage_table *coverage = (struct coverage_table *)args; + enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK; + struct coverage_entry *entry = coverage->base + coverage->num_entries; + + if (coverage->num_entries == MAX_COVERAGE_ENTRIES - 1) { + pr_err("FAIL: Out of space for test coverage data"); + return -ENOMEM; + } + + ++coverage->num_entries; + + entry->header = h; + entry->regs = coverage_start_registers(h); + entry->nesting = coverage->nesting; + entry->matched = false; + + if (type == DECODE_TYPE_TABLE) { + struct decode_table *d = (struct decode_table *)h; + int ret; + ++coverage->nesting; + ret = table_iter(d->table.table, coverage_start_fn, coverage); + --coverage->nesting; + return ret; + } + + return 0; +} + +static int coverage_start(const union decode_item *table) +{ + coverage.base = kmalloc(MAX_COVERAGE_ENTRIES * + sizeof(struct coverage_entry), GFP_KERNEL); + coverage.num_entries = 0; + coverage.nesting = 0; + return table_iter(table, coverage_start_fn, &coverage); +} + +static void +coverage_add_registers(struct coverage_entry *entry, kprobe_opcode_t insn) +{ + int regs = entry->header->type_regs.bits >> DECODE_TYPE_BITS; + int i; + for (i = 0; i < 20; i += 4) { + enum decode_reg_type reg_type = (regs >> i) & 0xf; + int reg = (insn >> i) & 0xf; + int flag; + + if (!reg_type) + continue; + + if (reg == 13) + flag = COVERAGE_SP; + else if (reg == 15) + flag = COVERAGE_PC; + else + flag = COVERAGE_ANY_REG; + entry->regs &= ~(flag << i); + + switch (reg_type) { + + case REG_TYPE_NONE: + case REG_TYPE_ANY: + case REG_TYPE_SAMEAS16: + break; + + case REG_TYPE_SP: + if (reg != 13) + return; + break; + + case REG_TYPE_PC: + if (reg != 15) + return; + break; + + case REG_TYPE_NOSP: + if (reg == 13) + return; + break; + + case REG_TYPE_NOSPPC: + case REG_TYPE_NOSPPCX: + if (reg == 13 || reg == 15) + return; + break; + + case REG_TYPE_NOPCWB: + if (!is_writeback(insn)) + break; + if (reg == 15) { + entry->regs &= ~(COVERAGE_PCWB << i); + return; + } + break; + + case REG_TYPE_NOPC: + case REG_TYPE_NOPCX: + if (reg == 15) + return; + break; + } + + } +} + +static void coverage_add(kprobe_opcode_t insn) +{ + struct coverage_entry *entry = coverage.base; + struct coverage_entry *end = coverage.base + coverage.num_entries; + bool matched = false; + unsigned nesting = 0; + + for (; entry < end; ++entry) { + const struct decode_header *h = entry->header; + enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK; + + if (entry->nesting > nesting) + continue; /* Skip sub-table we didn't match */ + + if (entry->nesting < nesting) + break; /* End of sub-table we were scanning */ + + if (!matched) { + if ((insn & h->mask.bits) != h->value.bits) + continue; + entry->matched = true; + } + + switch (type) { + + case DECODE_TYPE_TABLE: + ++nesting; + break; + + case DECODE_TYPE_CUSTOM: + case DECODE_TYPE_SIMULATE: + case DECODE_TYPE_EMULATE: + coverage_add_registers(entry, insn); + return; + + case DECODE_TYPE_OR: + matched = true; + break; + + case DECODE_TYPE_REJECT: + default: + return; + } + + } +} + +static void coverage_end(void) +{ + struct coverage_entry *entry = coverage.base; + struct coverage_entry *end = coverage.base + coverage.num_entries; + + for (; entry < end; ++entry) { + u32 mask = entry->header->mask.bits; + u32 value = entry->header->value.bits; + + if (entry->regs) { + pr_err("FAIL: Register test coverage missing for %08x %08x (%05x)\n", + mask, value, entry->regs); + coverage_fail = true; + } + if (!entry->matched) { + pr_err("FAIL: Test coverage entry missing for %08x %08x\n", + mask, value); + coverage_fail = true; + } + } + + kfree(coverage.base); +} + + +/* + * Framework for instruction set test cases + */ + +void __naked __kprobes_test_case_start(void) +{ + __asm__ __volatile__ ( + "stmdb sp!, {r4-r11} \n\t" + "sub sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t" + "bic r0, lr, #1 @ r0 = inline title string \n\t" + "mov r1, sp \n\t" + "bl kprobes_test_case_start \n\t" + "bx r0 \n\t" + ); +} + +#ifndef CONFIG_THUMB2_KERNEL + +void __naked __kprobes_test_case_end_32(void) +{ + __asm__ __volatile__ ( + "mov r4, lr \n\t" + "bl kprobes_test_case_end \n\t" + "cmp r0, #0 \n\t" + "movne pc, r0 \n\t" + "mov r0, r4 \n\t" + "add sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t" + "ldmia sp!, {r4-r11} \n\t" + "mov pc, r0 \n\t" + ); +} + +#else /* CONFIG_THUMB2_KERNEL */ + +void __naked __kprobes_test_case_end_16(void) +{ + __asm__ __volatile__ ( + "mov r4, lr \n\t" + "bl kprobes_test_case_end \n\t" + "cmp r0, #0 \n\t" + "bxne r0 \n\t" + "mov r0, r4 \n\t" + "add sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t" + "ldmia sp!, {r4-r11} \n\t" + "bx r0 \n\t" + ); +} + +void __naked __kprobes_test_case_end_32(void) +{ + __asm__ __volatile__ ( + ".arm \n\t" + "orr lr, lr, #1 @ will return to Thumb code \n\t" + "ldr pc, 1f \n\t" + "1: \n\t" + ".word __kprobes_test_case_end_16 \n\t" + ); +} + +#endif + + +int kprobe_test_flags; +int kprobe_test_cc_position; + +static int test_try_count; +static int test_pass_count; +static int test_fail_count; + +static struct pt_regs initial_regs; +static struct pt_regs expected_regs; +static struct pt_regs result_regs; + +static u32 expected_memory[TEST_MEMORY_SIZE/sizeof(u32)]; + +static const char *current_title; +static struct test_arg *current_args; +static u32 *current_stack; +static uintptr_t current_branch_target; + +static uintptr_t current_code_start; +static kprobe_opcode_t current_instruction; + + +#define TEST_CASE_PASSED -1 +#define TEST_CASE_FAILED -2 + +static int test_case_run_count; +static bool test_case_is_thumb; +static int test_instance; + +/* + * We ignore the state of the imprecise abort disable flag (CPSR.A) because this + * can change randomly as the kernel doesn't take care to preserve or initialise + * this across context switches. Also, with Security Extentions, the flag may + * not be under control of the kernel; for this reason we ignore the state of + * the FIQ disable flag CPSR.F as well. + */ +#define PSR_IGNORE_BITS (PSR_A_BIT | PSR_F_BIT) + +static unsigned long test_check_cc(int cc, unsigned long cpsr) +{ + unsigned long temp; + + switch (cc) { + case 0x0: /* eq */ + return cpsr & PSR_Z_BIT; + + case 0x1: /* ne */ + return (~cpsr) & PSR_Z_BIT; + + case 0x2: /* cs */ + return cpsr & PSR_C_BIT; + + case 0x3: /* cc */ + return (~cpsr) & PSR_C_BIT; + + case 0x4: /* mi */ + return cpsr & PSR_N_BIT; + + case 0x5: /* pl */ + return (~cpsr) & PSR_N_BIT; + + case 0x6: /* vs */ + return cpsr & PSR_V_BIT; + + case 0x7: /* vc */ + return (~cpsr) & PSR_V_BIT; + + case 0x8: /* hi */ + cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */ + return cpsr & PSR_C_BIT; + + case 0x9: /* ls */ + cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */ + return (~cpsr) & PSR_C_BIT; + + case 0xa: /* ge */ + cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + return (~cpsr) & PSR_N_BIT; + + case 0xb: /* lt */ + cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + return cpsr & PSR_N_BIT; + + case 0xc: /* gt */ + temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */ + return (~temp) & PSR_N_BIT; + + case 0xd: /* le */ + temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */ + return temp & PSR_N_BIT; + + case 0xe: /* al */ + case 0xf: /* unconditional */ + return true; + } + BUG(); + return false; +} + +static int is_last_scenario; +static int probe_should_run; /* 0 = no, 1 = yes, -1 = unknown */ +static int memory_needs_checking; + +static unsigned long test_context_cpsr(int scenario) +{ + unsigned long cpsr; + + probe_should_run = 1; + + /* Default case is that we cycle through 16 combinations of flags */ + cpsr = (scenario & 0xf) << 28; /* N,Z,C,V flags */ + cpsr |= (scenario & 0xf) << 16; /* GE flags */ + cpsr |= (scenario & 0x1) << 27; /* Toggle Q flag */ + + if (!test_case_is_thumb) { + /* Testing ARM code */ + probe_should_run = test_check_cc(current_instruction >> 28, cpsr) != 0; + if (scenario == 15) + is_last_scenario = true; + + } else if (kprobe_test_flags & TEST_FLAG_NO_ITBLOCK) { + /* Testing Thumb code without setting ITSTATE */ + if (kprobe_test_cc_position) { + int cc = (current_instruction >> kprobe_test_cc_position) & 0xf; + probe_should_run = test_check_cc(cc, cpsr) != 0; + } + + if (scenario == 15) + is_last_scenario = true; + + } else if (kprobe_test_flags & TEST_FLAG_FULL_ITBLOCK) { + /* Testing Thumb code with all combinations of ITSTATE */ + unsigned x = (scenario >> 4); + unsigned cond_base = x % 7; /* ITSTATE<7:5> */ + unsigned mask = x / 7 + 2; /* ITSTATE<4:0>, bits reversed */ + + if (mask > 0x1f) { + /* Finish by testing state from instruction 'itt al' */ + cond_base = 7; + mask = 0x4; + if ((scenario & 0xf) == 0xf) + is_last_scenario = true; + } + + cpsr |= cond_base << 13; /* ITSTATE<7:5> */ + cpsr |= (mask & 0x1) << 12; /* ITSTATE<4> */ + cpsr |= (mask & 0x2) << 10; /* ITSTATE<3> */ + cpsr |= (mask & 0x4) << 8; /* ITSTATE<2> */ + cpsr |= (mask & 0x8) << 23; /* ITSTATE<1> */ + cpsr |= (mask & 0x10) << 21; /* ITSTATE<0> */ + + probe_should_run = test_check_cc((cpsr >> 12) & 0xf, cpsr) != 0; + + } else { + /* Testing Thumb code with several combinations of ITSTATE */ + switch (scenario) { + case 16: /* Clear NZCV flags and 'it eq' state (false as Z=0) */ + cpsr = 0x00000800; + probe_should_run = 0; + break; + case 17: /* Set NZCV flags and 'it vc' state (false as V=1) */ + cpsr = 0xf0007800; + probe_should_run = 0; + break; + case 18: /* Clear NZCV flags and 'it ls' state (true as C=0) */ + cpsr = 0x00009800; + break; + case 19: /* Set NZCV flags and 'it cs' state (true as C=1) */ + cpsr = 0xf0002800; + is_last_scenario = true; + break; + } + } + + return cpsr; +} + +static void setup_test_context(struct pt_regs *regs) +{ + int scenario = test_case_run_count>>1; + unsigned long val; + struct test_arg *args; + int i; + + is_last_scenario = false; + memory_needs_checking = false; + + /* Initialise test memory on stack */ + val = (scenario & 1) ? VALM : ~VALM; + for (i = 0; i < TEST_MEMORY_SIZE / sizeof(current_stack[0]); ++i) + current_stack[i] = val + (i << 8); + /* Put target of branch on stack for tests which load PC from memory */ + if (current_branch_target) + current_stack[15] = current_branch_target; + /* Put a value for SP on stack for tests which load SP from memory */ + current_stack[13] = (u32)current_stack + 120; + + /* Initialise register values to their default state */ + val = (scenario & 2) ? VALR : ~VALR; + for (i = 0; i < 13; ++i) + regs->uregs[i] = val ^ (i << 8); + regs->ARM_lr = val ^ (14 << 8); + regs->ARM_cpsr &= ~(APSR_MASK | PSR_IT_MASK); + regs->ARM_cpsr |= test_context_cpsr(scenario); + + /* Perform testcase specific register setup */ + args = current_args; + for (; args[0].type != ARG_TYPE_END; ++args) + switch (args[0].type) { + case ARG_TYPE_REG: { + struct test_arg_regptr *arg = + (struct test_arg_regptr *)args; + regs->uregs[arg->reg] = arg->val; + break; + } + case ARG_TYPE_PTR: { + struct test_arg_regptr *arg = + (struct test_arg_regptr *)args; + regs->uregs[arg->reg] = + (unsigned long)current_stack + arg->val; + memory_needs_checking = true; + break; + } + case ARG_TYPE_MEM: { + struct test_arg_mem *arg = (struct test_arg_mem *)args; + current_stack[arg->index] = arg->val; + break; + } + default: + break; + } +} + +struct test_probe { + struct kprobe kprobe; + bool registered; + int hit; +}; + +static void unregister_test_probe(struct test_probe *probe) +{ + if (probe->registered) { + unregister_kprobe(&probe->kprobe); + probe->kprobe.flags = 0; /* Clear disable flag to allow reuse */ + } + probe->registered = false; +} + +static int register_test_probe(struct test_probe *probe) +{ + int ret; + + if (probe->registered) + BUG(); + + ret = register_kprobe(&probe->kprobe); + if (ret >= 0) { + probe->registered = true; + probe->hit = -1; + } + return ret; +} + +static int __kprobes +test_before_pre_handler(struct kprobe *p, struct pt_regs *regs) +{ + container_of(p, struct test_probe, kprobe)->hit = test_instance; + return 0; +} + +static void __kprobes +test_before_post_handler(struct kprobe *p, struct pt_regs *regs, + unsigned long flags) +{ + setup_test_context(regs); + initial_regs = *regs; + initial_regs.ARM_cpsr &= ~PSR_IGNORE_BITS; +} + +static int __kprobes +test_case_pre_handler(struct kprobe *p, struct pt_regs *regs) +{ + container_of(p, struct test_probe, kprobe)->hit = test_instance; + return 0; +} + +static int __kprobes +test_after_pre_handler(struct kprobe *p, struct pt_regs *regs) +{ + if (container_of(p, struct test_probe, kprobe)->hit == test_instance) + return 0; /* Already run for this test instance */ + + result_regs = *regs; + result_regs.ARM_cpsr &= ~PSR_IGNORE_BITS; + + /* Undo any changes done to SP by the test case */ + regs->ARM_sp = (unsigned long)current_stack; + + container_of(p, struct test_probe, kprobe)->hit = test_instance; + return 0; +} + +static struct test_probe test_before_probe = { + .kprobe.pre_handler = test_before_pre_handler, + .kprobe.post_handler = test_before_post_handler, +}; + +static struct test_probe test_case_probe = { + .kprobe.pre_handler = test_case_pre_handler, +}; + +static struct test_probe test_after_probe = { + .kprobe.pre_handler = test_after_pre_handler, +}; + +static struct test_probe test_after2_probe = { + .kprobe.pre_handler = test_after_pre_handler, +}; + +static void test_case_cleanup(void) +{ + unregister_test_probe(&test_before_probe); + unregister_test_probe(&test_case_probe); + unregister_test_probe(&test_after_probe); + unregister_test_probe(&test_after2_probe); +} + +static void print_registers(struct pt_regs *regs) +{ + pr_err("r0 %08lx | r1 %08lx | r2 %08lx | r3 %08lx\n", + regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); + pr_err("r4 %08lx | r5 %08lx | r6 %08lx | r7 %08lx\n", + regs->ARM_r4, regs->ARM_r5, regs->ARM_r6, regs->ARM_r7); + pr_err("r8 %08lx | r9 %08lx | r10 %08lx | r11 %08lx\n", + regs->ARM_r8, regs->ARM_r9, regs->ARM_r10, regs->ARM_fp); + pr_err("r12 %08lx | sp %08lx | lr %08lx | pc %08lx\n", + regs->ARM_ip, regs->ARM_sp, regs->ARM_lr, regs->ARM_pc); + pr_err("cpsr %08lx\n", regs->ARM_cpsr); +} + +static void print_memory(u32 *mem, size_t size) +{ + int i; + for (i = 0; i < size / sizeof(u32); i += 4) + pr_err("%08x %08x %08x %08x\n", mem[i], mem[i+1], + mem[i+2], mem[i+3]); +} + +static size_t expected_memory_size(u32 *sp) +{ + size_t size = sizeof(expected_memory); + int offset = (uintptr_t)sp - (uintptr_t)current_stack; + if (offset > 0) + size -= offset; + return size; +} + +static void test_case_failed(const char *message) +{ + test_case_cleanup(); + + pr_err("FAIL: %s\n", message); + pr_err("FAIL: Test %s\n", current_title); + pr_err("FAIL: Scenario %d\n", test_case_run_count >> 1); +} + +static unsigned long next_instruction(unsigned long pc) +{ +#ifdef CONFIG_THUMB2_KERNEL + if ((pc & 1) && !is_wide_instruction(*(u16 *)(pc - 1))) + return pc + 2; + else +#endif + return pc + 4; +} + +static uintptr_t __used kprobes_test_case_start(const char *title, void *stack) +{ + struct test_arg *args; + struct test_arg_end *end_arg; + unsigned long test_code; + + args = (struct test_arg *)PTR_ALIGN(title + strlen(title) + 1, 4); + + current_title = title; + current_args = args; + current_stack = stack; + + ++test_try_count; + + while (args->type != ARG_TYPE_END) + ++args; + end_arg = (struct test_arg_end *)args; + + test_code = (unsigned long)(args + 1); /* Code starts after args */ + + test_case_is_thumb = end_arg->flags & ARG_FLAG_THUMB; + if (test_case_is_thumb) + test_code |= 1; + + current_code_start = test_code; + + current_branch_target = 0; + if (end_arg->branch_offset != end_arg->end_offset) + current_branch_target = test_code + end_arg->branch_offset; + + test_code += end_arg->code_offset; + test_before_probe.kprobe.addr = (kprobe_opcode_t *)test_code; + + test_code = next_instruction(test_code); + test_case_probe.kprobe.addr = (kprobe_opcode_t *)test_code; + + if (test_case_is_thumb) { + u16 *p = (u16 *)(test_code & ~1); + current_instruction = p[0]; + if (is_wide_instruction(current_instruction)) { + current_instruction <<= 16; + current_instruction |= p[1]; + } + } else { + current_instruction = *(u32 *)test_code; + } + + if (current_title[0] == '.') + verbose("%s\n", current_title); + else + verbose("%s\t@ %0*x\n", current_title, + test_case_is_thumb ? 4 : 8, + current_instruction); + + test_code = next_instruction(test_code); + test_after_probe.kprobe.addr = (kprobe_opcode_t *)test_code; + + if (kprobe_test_flags & TEST_FLAG_NARROW_INSTR) { + if (!test_case_is_thumb || + is_wide_instruction(current_instruction)) { + test_case_failed("expected 16-bit instruction"); + goto fail; + } + } else { + if (test_case_is_thumb && + !is_wide_instruction(current_instruction)) { + test_case_failed("expected 32-bit instruction"); + goto fail; + } + } + + coverage_add(current_instruction); + + if (end_arg->flags & ARG_FLAG_UNSUPPORTED) { + if (register_test_probe(&test_case_probe) < 0) + goto pass; + test_case_failed("registered probe for unsupported instruction"); + goto fail; + } + + if (end_arg->flags & ARG_FLAG_SUPPORTED) { + if (register_test_probe(&test_case_probe) >= 0) + goto pass; + test_case_failed("couldn't register probe for supported instruction"); + goto fail; + } + + if (register_test_probe(&test_before_probe) < 0) { + test_case_failed("register test_before_probe failed"); + goto fail; + } + if (register_test_probe(&test_after_probe) < 0) { + test_case_failed("register test_after_probe failed"); + goto fail; + } + if (current_branch_target) { + test_after2_probe.kprobe.addr = + (kprobe_opcode_t *)current_branch_target; + if (register_test_probe(&test_after2_probe) < 0) { + test_case_failed("register test_after2_probe failed"); + goto fail; + } + } + + /* Start first run of test case */ + test_case_run_count = 0; + ++test_instance; + return current_code_start; +pass: + test_case_run_count = TEST_CASE_PASSED; + return (uintptr_t)test_after_probe.kprobe.addr; +fail: + test_case_run_count = TEST_CASE_FAILED; + return (uintptr_t)test_after_probe.kprobe.addr; +} + +static bool check_test_results(void) +{ + size_t mem_size = 0; + u32 *mem = 0; + + if (memcmp(&expected_regs, &result_regs, sizeof(expected_regs))) { + test_case_failed("registers differ"); + goto fail; + } + + if (memory_needs_checking) { + mem = (u32 *)result_regs.ARM_sp; + mem_size = expected_memory_size(mem); + if (memcmp(expected_memory, mem, mem_size)) { + test_case_failed("test memory differs"); + goto fail; + } + } + + return true; + +fail: + pr_err("initial_regs:\n"); + print_registers(&initial_regs); + pr_err("expected_regs:\n"); + print_registers(&expected_regs); + pr_err("result_regs:\n"); + print_registers(&result_regs); + + if (mem) { + pr_err("current_stack=%p\n", current_stack); + pr_err("expected_memory:\n"); + print_memory(expected_memory, mem_size); + pr_err("result_memory:\n"); + print_memory(mem, mem_size); + } + + return false; +} + +static uintptr_t __used kprobes_test_case_end(void) +{ + if (test_case_run_count < 0) { + if (test_case_run_count == TEST_CASE_PASSED) + /* kprobes_test_case_start did all the needed testing */ + goto pass; + else + /* kprobes_test_case_start failed */ + goto fail; + } + + if (test_before_probe.hit != test_instance) { + test_case_failed("test_before_handler not run"); + goto fail; + } + + if (test_after_probe.hit != test_instance && + test_after2_probe.hit != test_instance) { + test_case_failed("test_after_handler not run"); + goto fail; + } + + /* + * Even numbered test runs ran without a probe on the test case so + * we can gather reference results. The subsequent odd numbered run + * will have the probe inserted. + */ + if ((test_case_run_count & 1) == 0) { + /* Save results from run without probe */ + u32 *mem = (u32 *)result_regs.ARM_sp; + expected_regs = result_regs; + memcpy(expected_memory, mem, expected_memory_size(mem)); + + /* Insert probe onto test case instruction */ + if (register_test_probe(&test_case_probe) < 0) { + test_case_failed("register test_case_probe failed"); + goto fail; + } + } else { + /* Check probe ran as expected */ + if (probe_should_run == 1) { + if (test_case_probe.hit != test_instance) { + test_case_failed("test_case_handler not run"); + goto fail; + } + } else if (probe_should_run == 0) { + if (test_case_probe.hit == test_instance) { + test_case_failed("test_case_handler ran"); + goto fail; + } + } + + /* Remove probe for any subsequent reference run */ + unregister_test_probe(&test_case_probe); + + if (!check_test_results()) + goto fail; + + if (is_last_scenario) + goto pass; + } + + /* Do next test run */ + ++test_case_run_count; + ++test_instance; + return current_code_start; +fail: + ++test_fail_count; + goto end; +pass: + ++test_pass_count; +end: + test_case_cleanup(); + return 0; +} + + +/* + * Top level test functions + */ + +static int run_test_cases(void (*tests)(void), const union decode_item *table) +{ + int ret; + + pr_info(" Check decoding tables\n"); + ret = table_test(table); + if (ret) + return ret; + + pr_info(" Run test cases\n"); + ret = coverage_start(table); + if (ret) + return ret; + + tests(); + + coverage_end(); + return 0; +} + + +static int __init run_all_tests(void) +{ + int ret = 0; + + pr_info("Begining kprobe tests...\n"); + +#ifndef CONFIG_THUMB2_KERNEL + + pr_info("Probe ARM code\n"); + ret = run_api_tests(arm_func); + if (ret) + goto out; + + pr_info("ARM instruction simulation\n"); + ret = run_test_cases(kprobe_arm_test_cases, kprobe_decode_arm_table); + if (ret) + goto out; + +#else /* CONFIG_THUMB2_KERNEL */ + + pr_info("Probe 16-bit Thumb code\n"); + ret = run_api_tests(thumb16_func); + if (ret) + goto out; + + pr_info("Probe 32-bit Thumb code, even halfword\n"); + ret = run_api_tests(thumb32even_func); + if (ret) + goto out; + + pr_info("Probe 32-bit Thumb code, odd halfword\n"); + ret = run_api_tests(thumb32odd_func); + if (ret) + goto out; + + pr_info("16-bit Thumb instruction simulation\n"); + ret = run_test_cases(kprobe_thumb16_test_cases, + kprobe_decode_thumb16_table); + if (ret) + goto out; + + pr_info("32-bit Thumb instruction simulation\n"); + ret = run_test_cases(kprobe_thumb32_test_cases, + kprobe_decode_thumb32_table); + if (ret) + goto out; +#endif + + pr_info("Total instruction simulation tests=%d, pass=%d fail=%d\n", + test_try_count, test_pass_count, test_fail_count); + if (test_fail_count) { + ret = -EINVAL; + goto out; + } + +#if BENCHMARKING + pr_info("Benchmarks\n"); + ret = run_benchmarks(); + if (ret) + goto out; +#endif + +#if __LINUX_ARM_ARCH__ >= 7 + /* We are able to run all test cases so coverage should be complete */ + if (coverage_fail) { + pr_err("FAIL: Test coverage checks failed\n"); + ret = -EINVAL; + goto out; + } +#endif + +out: + if (ret == 0) + pr_info("Finished kprobe tests OK\n"); + else + pr_err("kprobe tests failed\n"); + + return ret; +} + + +/* + * Module setup + */ + +#ifdef MODULE + +static void __exit kprobe_test_exit(void) +{ +} + +module_init(run_all_tests) +module_exit(kprobe_test_exit) +MODULE_LICENSE("GPL"); + +#else /* !MODULE */ + +late_initcall(run_all_tests); + +#endif diff --git a/arch/arm/kernel/kprobes-test.h b/arch/arm/kernel/kprobes-test.h new file mode 100644 index 00000000000..0dc5d77b935 --- /dev/null +++ b/arch/arm/kernel/kprobes-test.h @@ -0,0 +1,392 @@ +/* + * arch/arm/kernel/kprobes-test.h + * + * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define VERBOSE 0 /* Set to '1' for more logging of test cases */ + +#ifdef CONFIG_THUMB2_KERNEL +#define NORMAL_ISA "16" +#else +#define NORMAL_ISA "32" +#endif + + +/* Flags used in kprobe_test_flags */ +#define TEST_FLAG_NO_ITBLOCK (1<<0) +#define TEST_FLAG_FULL_ITBLOCK (1<<1) +#define TEST_FLAG_NARROW_INSTR (1<<2) + +extern int kprobe_test_flags; +extern int kprobe_test_cc_position; + + +#define TEST_MEMORY_SIZE 256 + + +/* + * Test case structures. + * + * The arguments given to test cases can be one of three types. + * + * ARG_TYPE_REG + * Load a register with the given value. + * + * ARG_TYPE_PTR + * Load a register with a pointer into the stack buffer (SP + given value). + * + * ARG_TYPE_MEM + * Store the given value into the stack buffer at [SP+index]. + * + */ + +#define ARG_TYPE_END 0 +#define ARG_TYPE_REG 1 +#define ARG_TYPE_PTR 2 +#define ARG_TYPE_MEM 3 + +#define ARG_FLAG_UNSUPPORTED 0x01 +#define ARG_FLAG_SUPPORTED 0x02 +#define ARG_FLAG_THUMB 0x10 /* Must be 16 so TEST_ISA can be used */ +#define ARG_FLAG_ARM 0x20 /* Must be 32 so TEST_ISA can be used */ + +struct test_arg { + u8 type; /* ARG_TYPE_x */ + u8 _padding[7]; +}; + +struct test_arg_regptr { + u8 type; /* ARG_TYPE_REG or ARG_TYPE_PTR */ + u8 reg; + u8 _padding[2]; + u32 val; +}; + +struct test_arg_mem { + u8 type; /* ARG_TYPE_MEM */ + u8 index; + u8 _padding[2]; + u32 val; +}; + +struct test_arg_end { + u8 type; /* ARG_TYPE_END */ + u8 flags; /* ARG_FLAG_x */ + u16 code_offset; + u16 branch_offset; + u16 end_offset; +}; + + +/* + * Building blocks for test cases. + * + * Each test case is wrapped between TESTCASE_START and TESTCASE_END. + * + * To specify arguments for a test case the TEST_ARG_{REG,PTR,MEM} macros are + * used followed by a terminating TEST_ARG_END. + * + * After this, the instruction to be tested is defined with TEST_INSTRUCTION. + * Or for branches, TEST_BRANCH_B and TEST_BRANCH_F (branch forwards/backwards). + * + * Some specific test cases may make use of other custom constructs. + */ + +#if VERBOSE +#define verbose(fmt, ...) pr_info(fmt, ##__VA_ARGS__) +#else +#define verbose(fmt, ...) +#endif + +#define TEST_GROUP(title) \ + verbose("\n"); \ + verbose(title"\n"); \ + verbose("---------------------------------------------------------\n"); + +#define TESTCASE_START(title) \ + __asm__ __volatile__ ( \ + "bl __kprobes_test_case_start \n\t" \ + /* don't use .asciz here as 'title' may be */ \ + /* multiple strings to be concatenated. */ \ + ".ascii "#title" \n\t" \ + ".byte 0 \n\t" \ + ".align 2 \n\t" + +#define TEST_ARG_REG(reg, val) \ + ".byte "__stringify(ARG_TYPE_REG)" \n\t" \ + ".byte "#reg" \n\t" \ + ".short 0 \n\t" \ + ".word "#val" \n\t" + +#define TEST_ARG_PTR(reg, val) \ + ".byte "__stringify(ARG_TYPE_PTR)" \n\t" \ + ".byte "#reg" \n\t" \ + ".short 0 \n\t" \ + ".word "#val" \n\t" + +#define TEST_ARG_MEM(index, val) \ + ".byte "__stringify(ARG_TYPE_MEM)" \n\t" \ + ".byte "#index" \n\t" \ + ".short 0 \n\t" \ + ".word "#val" \n\t" + +#define TEST_ARG_END(flags) \ + ".byte "__stringify(ARG_TYPE_END)" \n\t" \ + ".byte "TEST_ISA flags" \n\t" \ + ".short 50f-0f \n\t" \ + ".short 2f-0f \n\t" \ + ".short 99f-0f \n\t" \ + ".code "TEST_ISA" \n\t" \ + "0: \n\t" + +#define TEST_INSTRUCTION(instruction) \ + "50: nop \n\t" \ + "1: "instruction" \n\t" \ + " nop \n\t" + +#define TEST_BRANCH_F(instruction, xtra_dist) \ + TEST_INSTRUCTION(instruction) \ + ".if "#xtra_dist" \n\t" \ + " b 99f \n\t" \ + ".space "#xtra_dist" \n\t" \ + ".endif \n\t" \ + " b 99f \n\t" \ + "2: nop \n\t" + +#define TEST_BRANCH_B(instruction, xtra_dist) \ + " b 50f \n\t" \ + " b 99f \n\t" \ + "2: nop \n\t" \ + " b 99f \n\t" \ + ".if "#xtra_dist" \n\t" \ + ".space "#xtra_dist" \n\t" \ + ".endif \n\t" \ + TEST_INSTRUCTION(instruction) + +#define TESTCASE_END \ + "2: \n\t" \ + "99: \n\t" \ + " bl __kprobes_test_case_end_"TEST_ISA" \n\t" \ + ".code "NORMAL_ISA" \n\t" \ + : : \ + : "r0", "r1", "r2", "r3", "ip", "lr", "memory", "cc" \ + ); + + +/* + * Macros to define test cases. + * + * Those of the form TEST_{R,P,M}* can be used to define test cases + * which take combinations of the three basic types of arguments. E.g. + * + * TEST_R One register argument + * TEST_RR Two register arguments + * TEST_RPR A register, a pointer, then a register argument + * + * For testing instructions which may branch, there are macros TEST_BF_* + * and TEST_BB_* for branching forwards and backwards. + * + * TEST_SUPPORTED and TEST_UNSUPPORTED don't cause the code to be executed, + * the just verify that a kprobe is or is not allowed on the given instruction. + */ + +#define TEST(code) \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code) \ + TESTCASE_END + +#define TEST_UNSUPPORTED(code) \ + TESTCASE_START(code) \ + TEST_ARG_END("|"__stringify(ARG_FLAG_UNSUPPORTED)) \ + TEST_INSTRUCTION(code) \ + TESTCASE_END + +#define TEST_SUPPORTED(code) \ + TESTCASE_START(code) \ + TEST_ARG_END("|"__stringify(ARG_FLAG_SUPPORTED)) \ + TEST_INSTRUCTION(code) \ + TESTCASE_END + +#define TEST_R(code1, reg, val, code2) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg code2) \ + TESTCASE_END + +#define TEST_RR(code1, reg1, val1, code2, reg2, val2, code3) \ + TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \ + TESTCASE_END + +#define TEST_RRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\ + TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_REG(reg3, val3) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TESTCASE_END + +#define TEST_RRRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4, reg4, val4) \ + TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_REG(reg3, val3) \ + TEST_ARG_REG(reg4, val4) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4) \ + TESTCASE_END + +#define TEST_P(code1, reg1, val1, code2) \ + TESTCASE_START(code1 #reg1 code2) \ + TEST_ARG_PTR(reg1, val1) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2) \ + TESTCASE_END + +#define TEST_PR(code1, reg1, val1, code2, reg2, val2, code3) \ + TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ + TEST_ARG_PTR(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \ + TESTCASE_END + +#define TEST_RP(code1, reg1, val1, code2, reg2, val2, code3) \ + TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_PTR(reg2, val2) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \ + TESTCASE_END + +#define TEST_PRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\ + TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TEST_ARG_PTR(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_REG(reg3, val3) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TESTCASE_END + +#define TEST_RPR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\ + TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_PTR(reg2, val2) \ + TEST_ARG_REG(reg3, val3) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TESTCASE_END + +#define TEST_RRP(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\ + TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_PTR(reg3, val3) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TESTCASE_END + +#define TEST_BF_P(code1, reg1, val1, code2) \ + TESTCASE_START(code1 #reg1 code2) \ + TEST_ARG_PTR(reg1, val1) \ + TEST_ARG_END("") \ + TEST_BRANCH_F(code1 #reg1 code2, 0) \ + TESTCASE_END + +#define TEST_BF_X(code, xtra_dist) \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + TEST_BRANCH_F(code, xtra_dist) \ + TESTCASE_END + +#define TEST_BB_X(code, xtra_dist) \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + TEST_BRANCH_B(code, xtra_dist) \ + TESTCASE_END + +#define TEST_BF_RX(code1, reg, val, code2, xtra_dist) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_END("") \ + TEST_BRANCH_F(code1 #reg code2, xtra_dist) \ + TESTCASE_END + +#define TEST_BB_RX(code1, reg, val, code2, xtra_dist) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_END("") \ + TEST_BRANCH_B(code1 #reg code2, xtra_dist) \ + TESTCASE_END + +#define TEST_BF(code) TEST_BF_X(code, 0) +#define TEST_BB(code) TEST_BB_X(code, 0) + +#define TEST_BF_R(code1, reg, val, code2) TEST_BF_RX(code1, reg, val, code2, 0) +#define TEST_BB_R(code1, reg, val, code2) TEST_BB_RX(code1, reg, val, code2, 0) + +#define TEST_BF_RR(code1, reg1, val1, code2, reg2, val2, code3) \ + TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_END("") \ + TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3, 0) \ + TESTCASE_END + +#define TEST_X(code, codex) \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code) \ + " b 99f \n\t" \ + " "codex" \n\t" \ + TESTCASE_END + +#define TEST_RX(code1, reg, val, code2, codex) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 __stringify(reg) code2) \ + " b 99f \n\t" \ + " "codex" \n\t" \ + TESTCASE_END + +#define TEST_RRX(code1, reg1, val1, code2, reg2, val2, code3, codex) \ + TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 __stringify(reg1) code2 __stringify(reg2) code3) \ + " b 99f \n\t" \ + " "codex" \n\t" \ + TESTCASE_END + + +/* Various values used in test cases... */ +#define N(val) (val ^ 0xffffffff) +#define VAL1 0x12345678 +#define VAL2 N(VAL1) +#define VAL3 0xa5f801 +#define VAL4 N(VAL3) +#define VALM 0x456789ab +#define VALR 0xdeaddead +#define HH1 0x0123fecb +#define HH2 0xa9874567 + + +#ifdef CONFIG_THUMB2_KERNEL +void kprobe_thumb16_test_cases(void); +void kprobe_thumb32_test_cases(void); +#else +void kprobe_arm_test_cases(void); +#endif diff --git a/arch/arm/kernel/kprobes-thumb.c b/arch/arm/kernel/kprobes-thumb.c index 902ca59e8b1..8f96ec778e8 100644 --- a/arch/arm/kernel/kprobes-thumb.c +++ b/arch/arm/kernel/kprobes-thumb.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/kprobes.h> +#include <linux/module.h> #include "kprobes.h" @@ -943,6 +944,9 @@ const union decode_item kprobe_decode_thumb32_table[] = { */ DECODE_END }; +#ifdef CONFIG_ARM_KPROBES_TEST_MODULE +EXPORT_SYMBOL_GPL(kprobe_decode_thumb32_table); +#endif static void __kprobes t16_simulate_bxblx(struct kprobe *p, struct pt_regs *regs) @@ -1423,6 +1427,9 @@ const union decode_item kprobe_decode_thumb16_table[] = { DECODE_END }; +#ifdef CONFIG_ARM_KPROBES_TEST_MODULE +EXPORT_SYMBOL_GPL(kprobe_decode_thumb16_table); +#endif static unsigned long __kprobes thumb_check_cc(unsigned long cpsr) { diff --git a/arch/arm/kernel/kprobes.h b/arch/arm/kernel/kprobes.h index a6aeda0a6c7..38945f78f9f 100644 --- a/arch/arm/kernel/kprobes.h +++ b/arch/arm/kernel/kprobes.h @@ -413,6 +413,14 @@ struct decode_reject { DECODE_HEADER(DECODE_TYPE_REJECT, _mask, _value, 0) +#ifdef CONFIG_THUMB2_KERNEL +extern const union decode_item kprobe_decode_thumb16_table[]; +extern const union decode_item kprobe_decode_thumb32_table[]; +#else +extern const union decode_item kprobe_decode_arm_table[]; +#endif + + int kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi, const union decode_item *table, bool thumb16); diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 53c9c2610cb..e6e5d7c84f1 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -12,6 +12,7 @@ */ #define pr_fmt(fmt) "hw perfevents: " fmt +#include <linux/bitmap.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> @@ -26,16 +27,8 @@ #include <asm/pmu.h> #include <asm/stacktrace.h> -static struct platform_device *pmu_device; - -/* - * Hardware lock to serialize accesses to PMU registers. Needed for the - * read/modify/write sequences. - */ -static DEFINE_RAW_SPINLOCK(pmu_lock); - /* - * ARMv6 supports a maximum of 3 events, starting from index 1. If we add + * ARMv6 supports a maximum of 3 events, starting from index 0. If we add * another platform that supports more, we need to increase this to be the * largest of all platforms. * @@ -43,62 +36,24 @@ static DEFINE_RAW_SPINLOCK(pmu_lock); * cycle counter CCNT + 31 events counters CNT0..30. * Cortex-A8 has 1+4 counters, Cortex-A9 has 1+6 counters. */ -#define ARMPMU_MAX_HWEVENTS 33 +#define ARMPMU_MAX_HWEVENTS 32 -/* The events for a given CPU. */ -struct cpu_hw_events { - /* - * The events that are active on the CPU for the given index. Index 0 - * is reserved. - */ - struct perf_event *events[ARMPMU_MAX_HWEVENTS]; - - /* - * A 1 bit for an index indicates that the counter is being used for - * an event. A 0 means that the counter can be used. - */ - unsigned long used_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)]; +static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events); +static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask); +static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events); - /* - * A 1 bit for an index indicates that the counter is actively being - * used. - */ - unsigned long active_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)]; -}; -static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events); - -struct arm_pmu { - enum arm_perf_pmu_ids id; - const char *name; - irqreturn_t (*handle_irq)(int irq_num, void *dev); - void (*enable)(struct hw_perf_event *evt, int idx); - void (*disable)(struct hw_perf_event *evt, int idx); - int (*get_event_idx)(struct cpu_hw_events *cpuc, - struct hw_perf_event *hwc); - u32 (*read_counter)(int idx); - void (*write_counter)(int idx, u32 val); - void (*start)(void); - void (*stop)(void); - void (*reset)(void *); - const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX]; - const unsigned (*event_map)[PERF_COUNT_HW_MAX]; - u32 raw_event_mask; - int num_events; - u64 max_period; -}; +#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu)) /* Set at runtime when we know what CPU type we are. */ -static const struct arm_pmu *armpmu; +static struct arm_pmu *cpu_pmu; enum arm_perf_pmu_ids armpmu_get_pmu_id(void) { int id = -ENODEV; - if (armpmu != NULL) - id = armpmu->id; + if (cpu_pmu != NULL) + id = cpu_pmu->id; return id; } @@ -109,8 +64,8 @@ armpmu_get_max_events(void) { int max_events = 0; - if (armpmu != NULL) - max_events = armpmu->num_events; + if (cpu_pmu != NULL) + max_events = cpu_pmu->num_events; return max_events; } @@ -130,7 +85,11 @@ EXPORT_SYMBOL_GPL(perf_num_counters); #define CACHE_OP_UNSUPPORTED 0xFFFF static int -armpmu_map_cache_event(u64 config) +armpmu_map_cache_event(const unsigned (*cache_map) + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX], + u64 config) { unsigned int cache_type, cache_op, cache_result, ret; @@ -146,7 +105,7 @@ armpmu_map_cache_event(u64 config) if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX) return -EINVAL; - ret = (int)(*armpmu->cache_map)[cache_type][cache_op][cache_result]; + ret = (int)(*cache_map)[cache_type][cache_op][cache_result]; if (ret == CACHE_OP_UNSUPPORTED) return -ENOENT; @@ -155,23 +114,46 @@ armpmu_map_cache_event(u64 config) } static int -armpmu_map_event(u64 config) +armpmu_map_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config) { - int mapping = (*armpmu->event_map)[config]; - return mapping == HW_OP_UNSUPPORTED ? -EOPNOTSUPP : mapping; + int mapping = (*event_map)[config]; + return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping; } static int -armpmu_map_raw_event(u64 config) +armpmu_map_raw_event(u32 raw_event_mask, u64 config) { - return (int)(config & armpmu->raw_event_mask); + return (int)(config & raw_event_mask); } -static int +static int map_cpu_event(struct perf_event *event, + const unsigned (*event_map)[PERF_COUNT_HW_MAX], + const unsigned (*cache_map) + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX], + u32 raw_event_mask) +{ + u64 config = event->attr.config; + + switch (event->attr.type) { + case PERF_TYPE_HARDWARE: + return armpmu_map_event(event_map, config); + case PERF_TYPE_HW_CACHE: + return armpmu_map_cache_event(cache_map, config); + case PERF_TYPE_RAW: + return armpmu_map_raw_event(raw_event_mask, config); + } + + return -ENOENT; +} + +int armpmu_event_set_period(struct perf_event *event, struct hw_perf_event *hwc, int idx) { + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); s64 left = local64_read(&hwc->period_left); s64 period = hwc->sample_period; int ret = 0; @@ -202,11 +184,12 @@ armpmu_event_set_period(struct perf_event *event, return ret; } -static u64 +u64 armpmu_event_update(struct perf_event *event, struct hw_perf_event *hwc, int idx, int overflow) { + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); u64 delta, prev_raw_count, new_raw_count; again: @@ -246,11 +229,9 @@ armpmu_read(struct perf_event *event) static void armpmu_stop(struct perf_event *event, int flags) { + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); struct hw_perf_event *hwc = &event->hw; - if (!armpmu) - return; - /* * ARM pmu always has to update the counter, so ignore * PERF_EF_UPDATE, see comments in armpmu_start(). @@ -266,11 +247,9 @@ armpmu_stop(struct perf_event *event, int flags) static void armpmu_start(struct perf_event *event, int flags) { + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); struct hw_perf_event *hwc = &event->hw; - if (!armpmu) - return; - /* * ARM pmu always has to reprogram the period, so ignore * PERF_EF_RELOAD, see the comment below. @@ -293,16 +272,16 @@ armpmu_start(struct perf_event *event, int flags) static void armpmu_del(struct perf_event *event, int flags) { - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + struct pmu_hw_events *hw_events = armpmu->get_hw_events(); struct hw_perf_event *hwc = &event->hw; int idx = hwc->idx; WARN_ON(idx < 0); - clear_bit(idx, cpuc->active_mask); armpmu_stop(event, PERF_EF_UPDATE); - cpuc->events[idx] = NULL; - clear_bit(idx, cpuc->used_mask); + hw_events->events[idx] = NULL; + clear_bit(idx, hw_events->used_mask); perf_event_update_userpage(event); } @@ -310,7 +289,8 @@ armpmu_del(struct perf_event *event, int flags) static int armpmu_add(struct perf_event *event, int flags) { - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + struct pmu_hw_events *hw_events = armpmu->get_hw_events(); struct hw_perf_event *hwc = &event->hw; int idx; int err = 0; @@ -318,7 +298,7 @@ armpmu_add(struct perf_event *event, int flags) perf_pmu_disable(event->pmu); /* If we don't have a space for the counter then finish early. */ - idx = armpmu->get_event_idx(cpuc, hwc); + idx = armpmu->get_event_idx(hw_events, hwc); if (idx < 0) { err = idx; goto out; @@ -330,8 +310,7 @@ armpmu_add(struct perf_event *event, int flags) */ event->hw.idx = idx; armpmu->disable(hwc, idx); - cpuc->events[idx] = event; - set_bit(idx, cpuc->active_mask); + hw_events->events[idx] = event; hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE; if (flags & PERF_EF_START) @@ -345,25 +324,25 @@ out: return err; } -static struct pmu pmu; - static int -validate_event(struct cpu_hw_events *cpuc, +validate_event(struct pmu_hw_events *hw_events, struct perf_event *event) { + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); struct hw_perf_event fake_event = event->hw; + struct pmu *leader_pmu = event->group_leader->pmu; - if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF) + if (event->pmu != leader_pmu || event->state <= PERF_EVENT_STATE_OFF) return 1; - return armpmu->get_event_idx(cpuc, &fake_event) >= 0; + return armpmu->get_event_idx(hw_events, &fake_event) >= 0; } static int validate_group(struct perf_event *event) { struct perf_event *sibling, *leader = event->group_leader; - struct cpu_hw_events fake_pmu; + struct pmu_hw_events fake_pmu; memset(&fake_pmu, 0, sizeof(fake_pmu)); @@ -383,110 +362,119 @@ validate_group(struct perf_event *event) static irqreturn_t armpmu_platform_irq(int irq, void *dev) { - struct arm_pmu_platdata *plat = dev_get_platdata(&pmu_device->dev); + struct arm_pmu *armpmu = (struct arm_pmu *) dev; + struct platform_device *plat_device = armpmu->plat_device; + struct arm_pmu_platdata *plat = dev_get_platdata(&plat_device->dev); return plat->handle_irq(irq, dev, armpmu->handle_irq); } +static void +armpmu_release_hardware(struct arm_pmu *armpmu) +{ + int i, irq, irqs; + struct platform_device *pmu_device = armpmu->plat_device; + + irqs = min(pmu_device->num_resources, num_possible_cpus()); + + for (i = 0; i < irqs; ++i) { + if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs)) + continue; + irq = platform_get_irq(pmu_device, i); + if (irq >= 0) + free_irq(irq, armpmu); + } + + release_pmu(armpmu->type); +} + static int -armpmu_reserve_hardware(void) +armpmu_reserve_hardware(struct arm_pmu *armpmu) { struct arm_pmu_platdata *plat; irq_handler_t handle_irq; - int i, err = -ENODEV, irq; + int i, err, irq, irqs; + struct platform_device *pmu_device = armpmu->plat_device; - pmu_device = reserve_pmu(ARM_PMU_DEVICE_CPU); - if (IS_ERR(pmu_device)) { + err = reserve_pmu(armpmu->type); + if (err) { pr_warning("unable to reserve pmu\n"); - return PTR_ERR(pmu_device); + return err; } - init_pmu(ARM_PMU_DEVICE_CPU); - plat = dev_get_platdata(&pmu_device->dev); if (plat && plat->handle_irq) handle_irq = armpmu_platform_irq; else handle_irq = armpmu->handle_irq; - if (pmu_device->num_resources < 1) { + irqs = min(pmu_device->num_resources, num_possible_cpus()); + if (irqs < 1) { pr_err("no irqs for PMUs defined\n"); return -ENODEV; } - for (i = 0; i < pmu_device->num_resources; ++i) { + for (i = 0; i < irqs; ++i) { + err = 0; irq = platform_get_irq(pmu_device, i); if (irq < 0) continue; + /* + * If we have a single PMU interrupt that we can't shift, + * assume that we're running on a uniprocessor machine and + * continue. Otherwise, continue without this interrupt. + */ + if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) { + pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n", + irq, i); + continue; + } + err = request_irq(irq, handle_irq, IRQF_DISABLED | IRQF_NOBALANCING, - "armpmu", NULL); + "arm-pmu", armpmu); if (err) { - pr_warning("unable to request IRQ%d for ARM perf " - "counters\n", irq); - break; + pr_err("unable to request IRQ%d for ARM PMU counters\n", + irq); + armpmu_release_hardware(armpmu); + return err; } - } - if (err) { - for (i = i - 1; i >= 0; --i) { - irq = platform_get_irq(pmu_device, i); - if (irq >= 0) - free_irq(irq, NULL); - } - release_pmu(ARM_PMU_DEVICE_CPU); - pmu_device = NULL; + cpumask_set_cpu(i, &armpmu->active_irqs); } - return err; + return 0; } static void -armpmu_release_hardware(void) +hw_perf_event_destroy(struct perf_event *event) { - int i, irq; + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + atomic_t *active_events = &armpmu->active_events; + struct mutex *pmu_reserve_mutex = &armpmu->reserve_mutex; - for (i = pmu_device->num_resources - 1; i >= 0; --i) { - irq = platform_get_irq(pmu_device, i); - if (irq >= 0) - free_irq(irq, NULL); + if (atomic_dec_and_mutex_lock(active_events, pmu_reserve_mutex)) { + armpmu_release_hardware(armpmu); + mutex_unlock(pmu_reserve_mutex); } - armpmu->stop(); - - release_pmu(ARM_PMU_DEVICE_CPU); - pmu_device = NULL; } -static atomic_t active_events = ATOMIC_INIT(0); -static DEFINE_MUTEX(pmu_reserve_mutex); - -static void -hw_perf_event_destroy(struct perf_event *event) +static int +event_requires_mode_exclusion(struct perf_event_attr *attr) { - if (atomic_dec_and_mutex_lock(&active_events, &pmu_reserve_mutex)) { - armpmu_release_hardware(); - mutex_unlock(&pmu_reserve_mutex); - } + return attr->exclude_idle || attr->exclude_user || + attr->exclude_kernel || attr->exclude_hv; } static int __hw_perf_event_init(struct perf_event *event) { + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); struct hw_perf_event *hwc = &event->hw; int mapping, err; - /* Decode the generic type into an ARM event identifier. */ - if (PERF_TYPE_HARDWARE == event->attr.type) { - mapping = armpmu_map_event(event->attr.config); - } else if (PERF_TYPE_HW_CACHE == event->attr.type) { - mapping = armpmu_map_cache_event(event->attr.config); - } else if (PERF_TYPE_RAW == event->attr.type) { - mapping = armpmu_map_raw_event(event->attr.config); - } else { - pr_debug("event type %x not supported\n", event->attr.type); - return -EOPNOTSUPP; - } + mapping = armpmu->map_event(event); if (mapping < 0) { pr_debug("event %x:%llx not supported\n", event->attr.type, @@ -495,34 +483,31 @@ __hw_perf_event_init(struct perf_event *event) } /* + * We don't assign an index until we actually place the event onto + * hardware. Use -1 to signify that we haven't decided where to put it + * yet. For SMP systems, each core has it's own PMU so we can't do any + * clever allocation or constraints checking at this point. + */ + hwc->idx = -1; + hwc->config_base = 0; + hwc->config = 0; + hwc->event_base = 0; + + /* * Check whether we need to exclude the counter from certain modes. - * The ARM performance counters are on all of the time so if someone - * has asked us for some excludes then we have to fail. */ - if (event->attr.exclude_kernel || event->attr.exclude_user || - event->attr.exclude_hv || event->attr.exclude_idle) { + if ((!armpmu->set_event_filter || + armpmu->set_event_filter(hwc, &event->attr)) && + event_requires_mode_exclusion(&event->attr)) { pr_debug("ARM performance counters do not support " "mode exclusion\n"); return -EPERM; } /* - * We don't assign an index until we actually place the event onto - * hardware. Use -1 to signify that we haven't decided where to put it - * yet. For SMP systems, each core has it's own PMU so we can't do any - * clever allocation or constraints checking at this point. + * Store the event encoding into the config_base field. */ - hwc->idx = -1; - - /* - * Store the event encoding into the config_base field. config and - * event_base are unused as the only 2 things we need to know are - * the event mapping and the counter to use. The counter to use is - * also the indx and the config_base is the event type. - */ - hwc->config_base = (unsigned long)mapping; - hwc->config = 0; - hwc->event_base = 0; + hwc->config_base |= (unsigned long)mapping; if (!hwc->sample_period) { hwc->sample_period = armpmu->max_period; @@ -542,32 +527,23 @@ __hw_perf_event_init(struct perf_event *event) static int armpmu_event_init(struct perf_event *event) { + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); int err = 0; + atomic_t *active_events = &armpmu->active_events; - switch (event->attr.type) { - case PERF_TYPE_RAW: - case PERF_TYPE_HARDWARE: - case PERF_TYPE_HW_CACHE: - break; - - default: + if (armpmu->map_event(event) == -ENOENT) return -ENOENT; - } - - if (!armpmu) - return -ENODEV; event->destroy = hw_perf_event_destroy; - if (!atomic_inc_not_zero(&active_events)) { - mutex_lock(&pmu_reserve_mutex); - if (atomic_read(&active_events) == 0) { - err = armpmu_reserve_hardware(); - } + if (!atomic_inc_not_zero(active_events)) { + mutex_lock(&armpmu->reserve_mutex); + if (atomic_read(active_events) == 0) + err = armpmu_reserve_hardware(armpmu); if (!err) - atomic_inc(&active_events); - mutex_unlock(&pmu_reserve_mutex); + atomic_inc(active_events); + mutex_unlock(&armpmu->reserve_mutex); } if (err) @@ -582,22 +558,9 @@ static int armpmu_event_init(struct perf_event *event) static void armpmu_enable(struct pmu *pmu) { - /* Enable all of the perf events on hardware. */ - int idx, enabled = 0; - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); - - if (!armpmu) - return; - - for (idx = 0; idx <= armpmu->num_events; ++idx) { - struct perf_event *event = cpuc->events[idx]; - - if (!event) - continue; - - armpmu->enable(&event->hw, idx); - enabled = 1; - } + struct arm_pmu *armpmu = to_arm_pmu(pmu); + struct pmu_hw_events *hw_events = armpmu->get_hw_events(); + int enabled = bitmap_weight(hw_events->used_mask, armpmu->num_events); if (enabled) armpmu->start(); @@ -605,20 +568,32 @@ static void armpmu_enable(struct pmu *pmu) static void armpmu_disable(struct pmu *pmu) { - if (armpmu) - armpmu->stop(); + struct arm_pmu *armpmu = to_arm_pmu(pmu); + armpmu->stop(); } -static struct pmu pmu = { - .pmu_enable = armpmu_enable, - .pmu_disable = armpmu_disable, - .event_init = armpmu_event_init, - .add = armpmu_add, - .del = armpmu_del, - .start = armpmu_start, - .stop = armpmu_stop, - .read = armpmu_read, -}; +static void __init armpmu_init(struct arm_pmu *armpmu) +{ + atomic_set(&armpmu->active_events, 0); + mutex_init(&armpmu->reserve_mutex); + + armpmu->pmu = (struct pmu) { + .pmu_enable = armpmu_enable, + .pmu_disable = armpmu_disable, + .event_init = armpmu_event_init, + .add = armpmu_add, + .del = armpmu_del, + .start = armpmu_start, + .stop = armpmu_stop, + .read = armpmu_read, + }; +} + +int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type) +{ + armpmu_init(armpmu); + return perf_pmu_register(&armpmu->pmu, name, type); +} /* Include the PMU-specific implementations. */ #include "perf_event_xscale.c" @@ -630,14 +605,72 @@ static struct pmu pmu = { * This requires SMP to be available, so exists as a separate initcall. */ static int __init -armpmu_reset(void) +cpu_pmu_reset(void) +{ + if (cpu_pmu && cpu_pmu->reset) + return on_each_cpu(cpu_pmu->reset, NULL, 1); + return 0; +} +arch_initcall(cpu_pmu_reset); + +/* + * PMU platform driver and devicetree bindings. + */ +static struct of_device_id armpmu_of_device_ids[] = { + {.compatible = "arm,cortex-a9-pmu"}, + {.compatible = "arm,cortex-a8-pmu"}, + {.compatible = "arm,arm1136-pmu"}, + {.compatible = "arm,arm1176-pmu"}, + {}, +}; + +static struct platform_device_id armpmu_plat_device_ids[] = { + {.name = "arm-pmu"}, + {}, +}; + +static int __devinit armpmu_device_probe(struct platform_device *pdev) { - if (armpmu && armpmu->reset) - return on_each_cpu(armpmu->reset, NULL, 1); + cpu_pmu->plat_device = pdev; return 0; } -arch_initcall(armpmu_reset); +static struct platform_driver armpmu_driver = { + .driver = { + .name = "arm-pmu", + .of_match_table = armpmu_of_device_ids, + }, + .probe = armpmu_device_probe, + .id_table = armpmu_plat_device_ids, +}; + +static int __init register_pmu_driver(void) +{ + return platform_driver_register(&armpmu_driver); +} +device_initcall(register_pmu_driver); + +static struct pmu_hw_events *armpmu_get_cpu_events(void) +{ + return &__get_cpu_var(cpu_hw_events); +} + +static void __init cpu_pmu_init(struct arm_pmu *armpmu) +{ + int cpu; + for_each_possible_cpu(cpu) { + struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu); + events->events = per_cpu(hw_events, cpu); + events->used_mask = per_cpu(used_mask, cpu); + raw_spin_lock_init(&events->pmu_lock); + } + armpmu->get_hw_events = armpmu_get_cpu_events; + armpmu->type = ARM_PMU_DEVICE_CPU; +} + +/* + * CPU PMU identification and registration. + */ static int __init init_hw_perf_events(void) { @@ -651,22 +684,22 @@ init_hw_perf_events(void) case 0xB360: /* ARM1136 */ case 0xB560: /* ARM1156 */ case 0xB760: /* ARM1176 */ - armpmu = armv6pmu_init(); + cpu_pmu = armv6pmu_init(); break; case 0xB020: /* ARM11mpcore */ - armpmu = armv6mpcore_pmu_init(); + cpu_pmu = armv6mpcore_pmu_init(); break; case 0xC080: /* Cortex-A8 */ - armpmu = armv7_a8_pmu_init(); + cpu_pmu = armv7_a8_pmu_init(); break; case 0xC090: /* Cortex-A9 */ - armpmu = armv7_a9_pmu_init(); + cpu_pmu = armv7_a9_pmu_init(); break; case 0xC050: /* Cortex-A5 */ - armpmu = armv7_a5_pmu_init(); + cpu_pmu = armv7_a5_pmu_init(); break; case 0xC0F0: /* Cortex-A15 */ - armpmu = armv7_a15_pmu_init(); + cpu_pmu = armv7_a15_pmu_init(); break; } /* Intel CPUs [xscale]. */ @@ -674,23 +707,23 @@ init_hw_perf_events(void) part_number = (cpuid >> 13) & 0x7; switch (part_number) { case 1: - armpmu = xscale1pmu_init(); + cpu_pmu = xscale1pmu_init(); break; case 2: - armpmu = xscale2pmu_init(); + cpu_pmu = xscale2pmu_init(); break; } } - if (armpmu) { + if (cpu_pmu) { pr_info("enabled with %s PMU driver, %d counters available\n", - armpmu->name, armpmu->num_events); + cpu_pmu->name, cpu_pmu->num_events); + cpu_pmu_init(cpu_pmu); + armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW); } else { pr_info("no hardware support available\n"); } - perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW); - return 0; } early_initcall(init_hw_perf_events); diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index dd7f3b9f4cb..e63d8115c01 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -54,7 +54,7 @@ enum armv6_perf_types { }; enum armv6_counters { - ARMV6_CYCLE_COUNTER = 1, + ARMV6_CYCLE_COUNTER = 0, ARMV6_COUNTER0, ARMV6_COUNTER1, }; @@ -433,6 +433,7 @@ armv6pmu_enable_event(struct hw_perf_event *hwc, int idx) { unsigned long val, mask, evt, flags; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); if (ARMV6_CYCLE_COUNTER == idx) { mask = 0; @@ -454,12 +455,29 @@ armv6pmu_enable_event(struct hw_perf_event *hwc, * Mask out the current event and set the counter to count the event * that we're interested in. */ - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); val = armv6_pmcr_read(); val &= ~mask; val |= evt; armv6_pmcr_write(val); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); +} + +static int counter_is_active(unsigned long pmcr, int idx) +{ + unsigned long mask = 0; + if (idx == ARMV6_CYCLE_COUNTER) + mask = ARMV6_PMCR_CCOUNT_IEN; + else if (idx == ARMV6_COUNTER0) + mask = ARMV6_PMCR_COUNT0_IEN; + else if (idx == ARMV6_COUNTER1) + mask = ARMV6_PMCR_COUNT1_IEN; + + if (mask) + return pmcr & mask; + + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return 0; } static irqreturn_t @@ -468,7 +486,7 @@ armv6pmu_handle_irq(int irq_num, { unsigned long pmcr = armv6_pmcr_read(); struct perf_sample_data data; - struct cpu_hw_events *cpuc; + struct pmu_hw_events *cpuc; struct pt_regs *regs; int idx; @@ -487,11 +505,11 @@ armv6pmu_handle_irq(int irq_num, perf_sample_data_init(&data, 0); cpuc = &__get_cpu_var(cpu_hw_events); - for (idx = 0; idx <= armpmu->num_events; ++idx) { + for (idx = 0; idx < cpu_pmu->num_events; ++idx) { struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; - if (!test_bit(idx, cpuc->active_mask)) + if (!counter_is_active(pmcr, idx)) continue; /* @@ -508,7 +526,7 @@ armv6pmu_handle_irq(int irq_num, continue; if (perf_event_overflow(event, &data, regs)) - armpmu->disable(hwc, idx); + cpu_pmu->disable(hwc, idx); } /* @@ -527,28 +545,30 @@ static void armv6pmu_start(void) { unsigned long flags, val; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); val = armv6_pmcr_read(); val |= ARMV6_PMCR_ENABLE; armv6_pmcr_write(val); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static void armv6pmu_stop(void) { unsigned long flags, val; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); val = armv6_pmcr_read(); val &= ~ARMV6_PMCR_ENABLE; armv6_pmcr_write(val); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static int -armv6pmu_get_event_idx(struct cpu_hw_events *cpuc, +armv6pmu_get_event_idx(struct pmu_hw_events *cpuc, struct hw_perf_event *event) { /* Always place a cycle counter into the cycle counter. */ @@ -578,6 +598,7 @@ armv6pmu_disable_event(struct hw_perf_event *hwc, int idx) { unsigned long val, mask, evt, flags; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); if (ARMV6_CYCLE_COUNTER == idx) { mask = ARMV6_PMCR_CCOUNT_IEN; @@ -598,12 +619,12 @@ armv6pmu_disable_event(struct hw_perf_event *hwc, * of ETM bus signal assertion cycles. The external reporting should * be disabled and so this should never increment. */ - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); val = armv6_pmcr_read(); val &= ~mask; val |= evt; armv6_pmcr_write(val); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static void @@ -611,6 +632,7 @@ armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc, int idx) { unsigned long val, mask, flags, evt = 0; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); if (ARMV6_CYCLE_COUNTER == idx) { mask = ARMV6_PMCR_CCOUNT_IEN; @@ -627,15 +649,21 @@ armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc, * Unlike UP ARMv6, we don't have a way of stopping the counters. We * simply disable the interrupt reporting. */ - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); val = armv6_pmcr_read(); val &= ~mask; val |= evt; armv6_pmcr_write(val); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); +} + +static int armv6_map_event(struct perf_event *event) +{ + return map_cpu_event(event, &armv6_perf_map, + &armv6_perf_cache_map, 0xFF); } -static const struct arm_pmu armv6pmu = { +static struct arm_pmu armv6pmu = { .id = ARM_PERF_PMU_ID_V6, .name = "v6", .handle_irq = armv6pmu_handle_irq, @@ -646,14 +674,12 @@ static const struct arm_pmu armv6pmu = { .get_event_idx = armv6pmu_get_event_idx, .start = armv6pmu_start, .stop = armv6pmu_stop, - .cache_map = &armv6_perf_cache_map, - .event_map = &armv6_perf_map, - .raw_event_mask = 0xFF, + .map_event = armv6_map_event, .num_events = 3, .max_period = (1LLU << 32) - 1, }; -static const struct arm_pmu *__init armv6pmu_init(void) +static struct arm_pmu *__init armv6pmu_init(void) { return &armv6pmu; } @@ -665,7 +691,14 @@ static const struct arm_pmu *__init armv6pmu_init(void) * disable the interrupt reporting and update the event. When unthrottling we * reset the period and enable the interrupt reporting. */ -static const struct arm_pmu armv6mpcore_pmu = { + +static int armv6mpcore_map_event(struct perf_event *event) +{ + return map_cpu_event(event, &armv6mpcore_perf_map, + &armv6mpcore_perf_cache_map, 0xFF); +} + +static struct arm_pmu armv6mpcore_pmu = { .id = ARM_PERF_PMU_ID_V6MP, .name = "v6mpcore", .handle_irq = armv6pmu_handle_irq, @@ -676,24 +709,22 @@ static const struct arm_pmu armv6mpcore_pmu = { .get_event_idx = armv6pmu_get_event_idx, .start = armv6pmu_start, .stop = armv6pmu_stop, - .cache_map = &armv6mpcore_perf_cache_map, - .event_map = &armv6mpcore_perf_map, - .raw_event_mask = 0xFF, + .map_event = armv6mpcore_map_event, .num_events = 3, .max_period = (1LLU << 32) - 1, }; -static const struct arm_pmu *__init armv6mpcore_pmu_init(void) +static struct arm_pmu *__init armv6mpcore_pmu_init(void) { return &armv6mpcore_pmu; } #else -static const struct arm_pmu *__init armv6pmu_init(void) +static struct arm_pmu *__init armv6pmu_init(void) { return NULL; } -static const struct arm_pmu *__init armv6mpcore_pmu_init(void) +static struct arm_pmu *__init armv6mpcore_pmu_init(void) { return NULL; } diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 4c851834f68..98b75738345 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -17,6 +17,9 @@ */ #ifdef CONFIG_CPU_V7 + +static struct arm_pmu armv7pmu; + /* * Common ARMv7 event types * @@ -676,23 +679,24 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] }; /* - * Perf Events counters + * Perf Events' indices */ -enum armv7_counters { - ARMV7_CYCLE_COUNTER = 1, /* Cycle counter */ - ARMV7_COUNTER0 = 2, /* First event counter */ -}; +#define ARMV7_IDX_CYCLE_COUNTER 0 +#define ARMV7_IDX_COUNTER0 1 +#define ARMV7_IDX_COUNTER_LAST (ARMV7_IDX_CYCLE_COUNTER + cpu_pmu->num_events - 1) + +#define ARMV7_MAX_COUNTERS 32 +#define ARMV7_COUNTER_MASK (ARMV7_MAX_COUNTERS - 1) /* - * The cycle counter is ARMV7_CYCLE_COUNTER. - * The first event counter is ARMV7_COUNTER0. - * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1). + * ARMv7 low level PMNC access */ -#define ARMV7_COUNTER_LAST (ARMV7_COUNTER0 + armpmu->num_events - 1) /* - * ARMv7 low level PMNC access + * Perf Event to low level counters mapping */ +#define ARMV7_IDX_TO_COUNTER(x) \ + (((x) - ARMV7_IDX_COUNTER0) & ARMV7_COUNTER_MASK) /* * Per-CPU PMNC: config reg @@ -708,103 +712,76 @@ enum armv7_counters { #define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */ /* - * Available counters - */ -#define ARMV7_CNT0 0 /* First event counter */ -#define ARMV7_CCNT 31 /* Cycle counter */ - -/* Perf Event to low level counters mapping */ -#define ARMV7_EVENT_CNT_TO_CNTx (ARMV7_COUNTER0 - ARMV7_CNT0) - -/* - * CNTENS: counters enable reg - */ -#define ARMV7_CNTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_CNTENS_C (1 << ARMV7_CCNT) - -/* - * CNTENC: counters disable reg - */ -#define ARMV7_CNTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_CNTENC_C (1 << ARMV7_CCNT) - -/* - * INTENS: counters overflow interrupt enable reg - */ -#define ARMV7_INTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_INTENS_C (1 << ARMV7_CCNT) - -/* - * INTENC: counters overflow interrupt disable reg - */ -#define ARMV7_INTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_INTENC_C (1 << ARMV7_CCNT) - -/* - * EVTSEL: Event selection reg + * FLAG: counters overflow flag status reg */ -#define ARMV7_EVTSEL_MASK 0xff /* Mask for writable bits */ +#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */ +#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK /* - * SELECT: Counter selection reg + * PMXEVTYPER: Event selection reg */ -#define ARMV7_SELECT_MASK 0x1f /* Mask for writable bits */ +#define ARMV7_EVTYPE_MASK 0xc00000ff /* Mask for writable bits */ +#define ARMV7_EVTYPE_EVENT 0xff /* Mask for EVENT bits */ /* - * FLAG: counters overflow flag status reg + * Event filters for PMUv2 */ -#define ARMV7_FLAG_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_FLAG_C (1 << ARMV7_CCNT) -#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */ -#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK +#define ARMV7_EXCLUDE_PL1 (1 << 31) +#define ARMV7_EXCLUDE_USER (1 << 30) +#define ARMV7_INCLUDE_HYP (1 << 27) -static inline unsigned long armv7_pmnc_read(void) +static inline u32 armv7_pmnc_read(void) { u32 val; asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val)); return val; } -static inline void armv7_pmnc_write(unsigned long val) +static inline void armv7_pmnc_write(u32 val) { val &= ARMV7_PMNC_MASK; isb(); asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val)); } -static inline int armv7_pmnc_has_overflowed(unsigned long pmnc) +static inline int armv7_pmnc_has_overflowed(u32 pmnc) { return pmnc & ARMV7_OVERFLOWED_MASK; } -static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc, - enum armv7_counters counter) +static inline int armv7_pmnc_counter_valid(int idx) +{ + return idx >= ARMV7_IDX_CYCLE_COUNTER && idx <= ARMV7_IDX_COUNTER_LAST; +} + +static inline int armv7_pmnc_counter_has_overflowed(u32 pmnc, int idx) { int ret = 0; + u32 counter; - if (counter == ARMV7_CYCLE_COUNTER) - ret = pmnc & ARMV7_FLAG_C; - else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST)) - ret = pmnc & ARMV7_FLAG_P(counter); - else + if (!armv7_pmnc_counter_valid(idx)) { pr_err("CPU%u checking wrong counter %d overflow status\n", - smp_processor_id(), counter); + smp_processor_id(), idx); + } else { + counter = ARMV7_IDX_TO_COUNTER(idx); + ret = pmnc & BIT(counter); + } return ret; } -static inline int armv7_pmnc_select_counter(unsigned int idx) +static inline int armv7_pmnc_select_counter(int idx) { - u32 val; + u32 counter; - if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) { - pr_err("CPU%u selecting wrong PMNC counter" - " %d\n", smp_processor_id(), idx); - return -1; + if (!armv7_pmnc_counter_valid(idx)) { + pr_err("CPU%u selecting wrong PMNC counter %d\n", + smp_processor_id(), idx); + return -EINVAL; } - val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK; - asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val)); + counter = ARMV7_IDX_TO_COUNTER(idx); + asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (counter)); isb(); return idx; @@ -812,124 +789,95 @@ static inline int armv7_pmnc_select_counter(unsigned int idx) static inline u32 armv7pmu_read_counter(int idx) { - unsigned long value = 0; + u32 value = 0; - if (idx == ARMV7_CYCLE_COUNTER) - asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value)); - else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) { - if (armv7_pmnc_select_counter(idx) == idx) - asm volatile("mrc p15, 0, %0, c9, c13, 2" - : "=r" (value)); - } else + if (!armv7_pmnc_counter_valid(idx)) pr_err("CPU%u reading wrong counter %d\n", smp_processor_id(), idx); + else if (idx == ARMV7_IDX_CYCLE_COUNTER) + asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value)); + else if (armv7_pmnc_select_counter(idx) == idx) + asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (value)); return value; } static inline void armv7pmu_write_counter(int idx, u32 value) { - if (idx == ARMV7_CYCLE_COUNTER) - asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value)); - else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) { - if (armv7_pmnc_select_counter(idx) == idx) - asm volatile("mcr p15, 0, %0, c9, c13, 2" - : : "r" (value)); - } else + if (!armv7_pmnc_counter_valid(idx)) pr_err("CPU%u writing wrong counter %d\n", smp_processor_id(), idx); + else if (idx == ARMV7_IDX_CYCLE_COUNTER) + asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value)); + else if (armv7_pmnc_select_counter(idx) == idx) + asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" (value)); } -static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val) +static inline void armv7_pmnc_write_evtsel(int idx, u32 val) { if (armv7_pmnc_select_counter(idx) == idx) { - val &= ARMV7_EVTSEL_MASK; + val &= ARMV7_EVTYPE_MASK; asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val)); } } -static inline u32 armv7_pmnc_enable_counter(unsigned int idx) +static inline int armv7_pmnc_enable_counter(int idx) { - u32 val; + u32 counter; - if ((idx != ARMV7_CYCLE_COUNTER) && - ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { - pr_err("CPU%u enabling wrong PMNC counter" - " %d\n", smp_processor_id(), idx); - return -1; + if (!armv7_pmnc_counter_valid(idx)) { + pr_err("CPU%u enabling wrong PMNC counter %d\n", + smp_processor_id(), idx); + return -EINVAL; } - if (idx == ARMV7_CYCLE_COUNTER) - val = ARMV7_CNTENS_C; - else - val = ARMV7_CNTENS_P(idx); - - asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val)); - + counter = ARMV7_IDX_TO_COUNTER(idx); + asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (BIT(counter))); return idx; } -static inline u32 armv7_pmnc_disable_counter(unsigned int idx) +static inline int armv7_pmnc_disable_counter(int idx) { - u32 val; - + u32 counter; - if ((idx != ARMV7_CYCLE_COUNTER) && - ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { - pr_err("CPU%u disabling wrong PMNC counter" - " %d\n", smp_processor_id(), idx); - return -1; + if (!armv7_pmnc_counter_valid(idx)) { + pr_err("CPU%u disabling wrong PMNC counter %d\n", + smp_processor_id(), idx); + return -EINVAL; } - if (idx == ARMV7_CYCLE_COUNTER) - val = ARMV7_CNTENC_C; - else - val = ARMV7_CNTENC_P(idx); - - asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val)); - + counter = ARMV7_IDX_TO_COUNTER(idx); + asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (BIT(counter))); return idx; } -static inline u32 armv7_pmnc_enable_intens(unsigned int idx) +static inline int armv7_pmnc_enable_intens(int idx) { - u32 val; + u32 counter; - if ((idx != ARMV7_CYCLE_COUNTER) && - ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { - pr_err("CPU%u enabling wrong PMNC counter" - " interrupt enable %d\n", smp_processor_id(), idx); - return -1; + if (!armv7_pmnc_counter_valid(idx)) { + pr_err("CPU%u enabling wrong PMNC counter IRQ enable %d\n", + smp_processor_id(), idx); + return -EINVAL; } - if (idx == ARMV7_CYCLE_COUNTER) - val = ARMV7_INTENS_C; - else - val = ARMV7_INTENS_P(idx); - - asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val)); - + counter = ARMV7_IDX_TO_COUNTER(idx); + asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (BIT(counter))); return idx; } -static inline u32 armv7_pmnc_disable_intens(unsigned int idx) +static inline int armv7_pmnc_disable_intens(int idx) { - u32 val; + u32 counter; - if ((idx != ARMV7_CYCLE_COUNTER) && - ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { - pr_err("CPU%u disabling wrong PMNC counter" - " interrupt enable %d\n", smp_processor_id(), idx); - return -1; + if (!armv7_pmnc_counter_valid(idx)) { + pr_err("CPU%u disabling wrong PMNC counter IRQ enable %d\n", + smp_processor_id(), idx); + return -EINVAL; } - if (idx == ARMV7_CYCLE_COUNTER) - val = ARMV7_INTENC_C; - else - val = ARMV7_INTENC_P(idx); - - asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val)); - + counter = ARMV7_IDX_TO_COUNTER(idx); + asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter))); return idx; } @@ -973,14 +921,14 @@ static void armv7_pmnc_dump_regs(void) asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val)); printk(KERN_INFO "CCNT =0x%08x\n", val); - for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) { + for (cnt = ARMV7_IDX_COUNTER0; cnt <= ARMV7_IDX_COUNTER_LAST; cnt++) { armv7_pmnc_select_counter(cnt); asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val)); printk(KERN_INFO "CNT[%d] count =0x%08x\n", - cnt-ARMV7_EVENT_CNT_TO_CNTx, val); + ARMV7_IDX_TO_COUNTER(cnt), val); asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val)); printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n", - cnt-ARMV7_EVENT_CNT_TO_CNTx, val); + ARMV7_IDX_TO_COUNTER(cnt), val); } } #endif @@ -988,12 +936,13 @@ static void armv7_pmnc_dump_regs(void) static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) { unsigned long flags; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); /* * Enable counter and interrupt, and set the counter to count * the event that we're interested in. */ - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); /* * Disable counter @@ -1002,9 +951,10 @@ static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) /* * Set event (if destined for PMNx counters) - * We don't need to set the event if it's a cycle count + * We only need to set the event for the cycle counter if we + * have the ability to perform event filtering. */ - if (idx != ARMV7_CYCLE_COUNTER) + if (armv7pmu.set_event_filter || idx != ARMV7_IDX_CYCLE_COUNTER) armv7_pmnc_write_evtsel(idx, hwc->config_base); /* @@ -1017,17 +967,18 @@ static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) */ armv7_pmnc_enable_counter(idx); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx) { unsigned long flags; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); /* * Disable counter and interrupt */ - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); /* * Disable counter @@ -1039,14 +990,14 @@ static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx) */ armv7_pmnc_disable_intens(idx); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) { - unsigned long pmnc; + u32 pmnc; struct perf_sample_data data; - struct cpu_hw_events *cpuc; + struct pmu_hw_events *cpuc; struct pt_regs *regs; int idx; @@ -1069,13 +1020,10 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) perf_sample_data_init(&data, 0); cpuc = &__get_cpu_var(cpu_hw_events); - for (idx = 0; idx <= armpmu->num_events; ++idx) { + for (idx = 0; idx < cpu_pmu->num_events; ++idx) { struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; - if (!test_bit(idx, cpuc->active_mask)) - continue; - /* * We have a single interrupt for all counters. Check that * each counter has overflowed before we process it. @@ -1090,7 +1038,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) continue; if (perf_event_overflow(event, &data, regs)) - armpmu->disable(hwc, idx); + cpu_pmu->disable(hwc, idx); } /* @@ -1108,61 +1056,114 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) static void armv7pmu_start(void) { unsigned long flags; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); /* Enable all counters */ armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static void armv7pmu_stop(void) { unsigned long flags; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); /* Disable all counters */ armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc, +static int armv7pmu_get_event_idx(struct pmu_hw_events *cpuc, struct hw_perf_event *event) { int idx; + unsigned long evtype = event->config_base & ARMV7_EVTYPE_EVENT; /* Always place a cycle counter into the cycle counter. */ - if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) { - if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask)) + if (evtype == ARMV7_PERFCTR_CPU_CYCLES) { + if (test_and_set_bit(ARMV7_IDX_CYCLE_COUNTER, cpuc->used_mask)) return -EAGAIN; - return ARMV7_CYCLE_COUNTER; - } else { - /* - * For anything other than a cycle counter, try and use - * the events counters - */ - for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) { - if (!test_and_set_bit(idx, cpuc->used_mask)) - return idx; - } + return ARMV7_IDX_CYCLE_COUNTER; + } - /* The counters are all in use. */ - return -EAGAIN; + /* + * For anything other than a cycle counter, try and use + * the events counters + */ + for (idx = ARMV7_IDX_COUNTER0; idx < cpu_pmu->num_events; ++idx) { + if (!test_and_set_bit(idx, cpuc->used_mask)) + return idx; } + + /* The counters are all in use. */ + return -EAGAIN; +} + +/* + * Add an event filter to a given event. This will only work for PMUv2 PMUs. + */ +static int armv7pmu_set_event_filter(struct hw_perf_event *event, + struct perf_event_attr *attr) +{ + unsigned long config_base = 0; + + if (attr->exclude_idle) + return -EPERM; + if (attr->exclude_user) + config_base |= ARMV7_EXCLUDE_USER; + if (attr->exclude_kernel) + config_base |= ARMV7_EXCLUDE_PL1; + if (!attr->exclude_hv) + config_base |= ARMV7_INCLUDE_HYP; + + /* + * Install the filter into config_base as this is used to + * construct the event type. + */ + event->config_base = config_base; + + return 0; } static void armv7pmu_reset(void *info) { - u32 idx, nb_cnt = armpmu->num_events; + u32 idx, nb_cnt = cpu_pmu->num_events; /* The counter and interrupt enable registers are unknown at reset. */ - for (idx = 1; idx < nb_cnt; ++idx) + for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) armv7pmu_disable_event(NULL, idx); /* Initialize & Reset PMNC: C and P bits */ armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C); } +static int armv7_a8_map_event(struct perf_event *event) +{ + return map_cpu_event(event, &armv7_a8_perf_map, + &armv7_a8_perf_cache_map, 0xFF); +} + +static int armv7_a9_map_event(struct perf_event *event) +{ + return map_cpu_event(event, &armv7_a9_perf_map, + &armv7_a9_perf_cache_map, 0xFF); +} + +static int armv7_a5_map_event(struct perf_event *event) +{ + return map_cpu_event(event, &armv7_a5_perf_map, + &armv7_a5_perf_cache_map, 0xFF); +} + +static int armv7_a15_map_event(struct perf_event *event) +{ + return map_cpu_event(event, &armv7_a15_perf_map, + &armv7_a15_perf_cache_map, 0xFF); +} + static struct arm_pmu armv7pmu = { .handle_irq = armv7pmu_handle_irq, .enable = armv7pmu_enable_event, @@ -1173,7 +1174,6 @@ static struct arm_pmu armv7pmu = { .start = armv7pmu_start, .stop = armv7pmu_stop, .reset = armv7pmu_reset, - .raw_event_mask = 0xFF, .max_period = (1LLU << 32) - 1, }; @@ -1188,62 +1188,59 @@ static u32 __init armv7_read_num_pmnc_events(void) return nb_cnt + 1; } -static const struct arm_pmu *__init armv7_a8_pmu_init(void) +static struct arm_pmu *__init armv7_a8_pmu_init(void) { armv7pmu.id = ARM_PERF_PMU_ID_CA8; armv7pmu.name = "ARMv7 Cortex-A8"; - armv7pmu.cache_map = &armv7_a8_perf_cache_map; - armv7pmu.event_map = &armv7_a8_perf_map; + armv7pmu.map_event = armv7_a8_map_event; armv7pmu.num_events = armv7_read_num_pmnc_events(); return &armv7pmu; } -static const struct arm_pmu *__init armv7_a9_pmu_init(void) +static struct arm_pmu *__init armv7_a9_pmu_init(void) { armv7pmu.id = ARM_PERF_PMU_ID_CA9; armv7pmu.name = "ARMv7 Cortex-A9"; - armv7pmu.cache_map = &armv7_a9_perf_cache_map; - armv7pmu.event_map = &armv7_a9_perf_map; + armv7pmu.map_event = armv7_a9_map_event; armv7pmu.num_events = armv7_read_num_pmnc_events(); return &armv7pmu; } -static const struct arm_pmu *__init armv7_a5_pmu_init(void) +static struct arm_pmu *__init armv7_a5_pmu_init(void) { armv7pmu.id = ARM_PERF_PMU_ID_CA5; armv7pmu.name = "ARMv7 Cortex-A5"; - armv7pmu.cache_map = &armv7_a5_perf_cache_map; - armv7pmu.event_map = &armv7_a5_perf_map; + armv7pmu.map_event = armv7_a5_map_event; armv7pmu.num_events = armv7_read_num_pmnc_events(); return &armv7pmu; } -static const struct arm_pmu *__init armv7_a15_pmu_init(void) +static struct arm_pmu *__init armv7_a15_pmu_init(void) { armv7pmu.id = ARM_PERF_PMU_ID_CA15; armv7pmu.name = "ARMv7 Cortex-A15"; - armv7pmu.cache_map = &armv7_a15_perf_cache_map; - armv7pmu.event_map = &armv7_a15_perf_map; + armv7pmu.map_event = armv7_a15_map_event; armv7pmu.num_events = armv7_read_num_pmnc_events(); + armv7pmu.set_event_filter = armv7pmu_set_event_filter; return &armv7pmu; } #else -static const struct arm_pmu *__init armv7_a8_pmu_init(void) +static struct arm_pmu *__init armv7_a8_pmu_init(void) { return NULL; } -static const struct arm_pmu *__init armv7_a9_pmu_init(void) +static struct arm_pmu *__init armv7_a9_pmu_init(void) { return NULL; } -static const struct arm_pmu *__init armv7_a5_pmu_init(void) +static struct arm_pmu *__init armv7_a5_pmu_init(void) { return NULL; } -static const struct arm_pmu *__init armv7_a15_pmu_init(void) +static struct arm_pmu *__init armv7_a15_pmu_init(void) { return NULL; } diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index 3c4397491d0..e0cca10a841 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -40,7 +40,7 @@ enum xscale_perf_types { }; enum xscale_counters { - XSCALE_CYCLE_COUNTER = 1, + XSCALE_CYCLE_COUNTER = 0, XSCALE_COUNTER0, XSCALE_COUNTER1, XSCALE_COUNTER2, @@ -222,7 +222,7 @@ xscale1pmu_handle_irq(int irq_num, void *dev) { unsigned long pmnc; struct perf_sample_data data; - struct cpu_hw_events *cpuc; + struct pmu_hw_events *cpuc; struct pt_regs *regs; int idx; @@ -249,13 +249,10 @@ xscale1pmu_handle_irq(int irq_num, void *dev) perf_sample_data_init(&data, 0); cpuc = &__get_cpu_var(cpu_hw_events); - for (idx = 0; idx <= armpmu->num_events; ++idx) { + for (idx = 0; idx < cpu_pmu->num_events; ++idx) { struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; - if (!test_bit(idx, cpuc->active_mask)) - continue; - if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx)) continue; @@ -266,7 +263,7 @@ xscale1pmu_handle_irq(int irq_num, void *dev) continue; if (perf_event_overflow(event, &data, regs)) - armpmu->disable(hwc, idx); + cpu_pmu->disable(hwc, idx); } irq_work_run(); @@ -284,6 +281,7 @@ static void xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx) { unsigned long val, mask, evt, flags; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); switch (idx) { case XSCALE_CYCLE_COUNTER: @@ -305,18 +303,19 @@ xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx) return; } - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); val = xscale1pmu_read_pmnc(); val &= ~mask; val |= evt; xscale1pmu_write_pmnc(val); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static void xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx) { unsigned long val, mask, evt, flags; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); switch (idx) { case XSCALE_CYCLE_COUNTER: @@ -336,16 +335,16 @@ xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx) return; } - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); val = xscale1pmu_read_pmnc(); val &= ~mask; val |= evt; xscale1pmu_write_pmnc(val); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static int -xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc, +xscale1pmu_get_event_idx(struct pmu_hw_events *cpuc, struct hw_perf_event *event) { if (XSCALE_PERFCTR_CCNT == event->config_base) { @@ -368,24 +367,26 @@ static void xscale1pmu_start(void) { unsigned long flags, val; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); val = xscale1pmu_read_pmnc(); val |= XSCALE_PMU_ENABLE; xscale1pmu_write_pmnc(val); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static void xscale1pmu_stop(void) { unsigned long flags, val; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); val = xscale1pmu_read_pmnc(); val &= ~XSCALE_PMU_ENABLE; xscale1pmu_write_pmnc(val); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static inline u32 @@ -424,7 +425,13 @@ xscale1pmu_write_counter(int counter, u32 val) } } -static const struct arm_pmu xscale1pmu = { +static int xscale_map_event(struct perf_event *event) +{ + return map_cpu_event(event, &xscale_perf_map, + &xscale_perf_cache_map, 0xFF); +} + +static struct arm_pmu xscale1pmu = { .id = ARM_PERF_PMU_ID_XSCALE1, .name = "xscale1", .handle_irq = xscale1pmu_handle_irq, @@ -435,14 +442,12 @@ static const struct arm_pmu xscale1pmu = { .get_event_idx = xscale1pmu_get_event_idx, .start = xscale1pmu_start, .stop = xscale1pmu_stop, - .cache_map = &xscale_perf_cache_map, - .event_map = &xscale_perf_map, - .raw_event_mask = 0xFF, + .map_event = xscale_map_event, .num_events = 3, .max_period = (1LLU << 32) - 1, }; -static const struct arm_pmu *__init xscale1pmu_init(void) +static struct arm_pmu *__init xscale1pmu_init(void) { return &xscale1pmu; } @@ -560,7 +565,7 @@ xscale2pmu_handle_irq(int irq_num, void *dev) { unsigned long pmnc, of_flags; struct perf_sample_data data; - struct cpu_hw_events *cpuc; + struct pmu_hw_events *cpuc; struct pt_regs *regs; int idx; @@ -581,13 +586,10 @@ xscale2pmu_handle_irq(int irq_num, void *dev) perf_sample_data_init(&data, 0); cpuc = &__get_cpu_var(cpu_hw_events); - for (idx = 0; idx <= armpmu->num_events; ++idx) { + for (idx = 0; idx < cpu_pmu->num_events; ++idx) { struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; - if (!test_bit(idx, cpuc->active_mask)) - continue; - if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx)) continue; @@ -598,7 +600,7 @@ xscale2pmu_handle_irq(int irq_num, void *dev) continue; if (perf_event_overflow(event, &data, regs)) - armpmu->disable(hwc, idx); + cpu_pmu->disable(hwc, idx); } irq_work_run(); @@ -616,6 +618,7 @@ static void xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) { unsigned long flags, ien, evtsel; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); ien = xscale2pmu_read_int_enable(); evtsel = xscale2pmu_read_event_select(); @@ -649,16 +652,17 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) return; } - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); xscale2pmu_write_event_select(evtsel); xscale2pmu_write_int_enable(ien); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static void xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) { unsigned long flags, ien, evtsel; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); ien = xscale2pmu_read_int_enable(); evtsel = xscale2pmu_read_event_select(); @@ -692,14 +696,14 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) return; } - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); xscale2pmu_write_event_select(evtsel); xscale2pmu_write_int_enable(ien); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static int -xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc, +xscale2pmu_get_event_idx(struct pmu_hw_events *cpuc, struct hw_perf_event *event) { int idx = xscale1pmu_get_event_idx(cpuc, event); @@ -718,24 +722,26 @@ static void xscale2pmu_start(void) { unsigned long flags, val; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64; val |= XSCALE_PMU_ENABLE; xscale2pmu_write_pmnc(val); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static void xscale2pmu_stop(void) { unsigned long flags, val; + struct pmu_hw_events *events = cpu_pmu->get_hw_events(); - raw_spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&events->pmu_lock, flags); val = xscale2pmu_read_pmnc(); val &= ~XSCALE_PMU_ENABLE; xscale2pmu_write_pmnc(val); - raw_spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } static inline u32 @@ -786,7 +792,7 @@ xscale2pmu_write_counter(int counter, u32 val) } } -static const struct arm_pmu xscale2pmu = { +static struct arm_pmu xscale2pmu = { .id = ARM_PERF_PMU_ID_XSCALE2, .name = "xscale2", .handle_irq = xscale2pmu_handle_irq, @@ -797,24 +803,22 @@ static const struct arm_pmu xscale2pmu = { .get_event_idx = xscale2pmu_get_event_idx, .start = xscale2pmu_start, .stop = xscale2pmu_stop, - .cache_map = &xscale_perf_cache_map, - .event_map = &xscale_perf_map, - .raw_event_mask = 0xFF, + .map_event = xscale_map_event, .num_events = 5, .max_period = (1LLU << 32) - 1, }; -static const struct arm_pmu *__init xscale2pmu_init(void) +static struct arm_pmu *__init xscale2pmu_init(void) { return &xscale2pmu; } #else -static const struct arm_pmu *__init xscale1pmu_init(void) +static struct arm_pmu *__init xscale1pmu_init(void) { return NULL; } -static const struct arm_pmu *__init xscale2pmu_init(void) +static struct arm_pmu *__init xscale2pmu_init(void) { return NULL; } diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c index c53474fe84d..2c3407ee857 100644 --- a/arch/arm/kernel/pmu.c +++ b/arch/arm/kernel/pmu.c @@ -10,192 +10,26 @@ * */ -#define pr_fmt(fmt) "PMU: " fmt - -#include <linux/cpumask.h> #include <linux/err.h> -#include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/of_device.h> -#include <linux/platform_device.h> #include <asm/pmu.h> -static volatile long pmu_lock; - -static struct platform_device *pmu_devices[ARM_NUM_PMU_DEVICES]; - -static int __devinit pmu_register(struct platform_device *pdev, - enum arm_pmu_type type) -{ - if (type < 0 || type >= ARM_NUM_PMU_DEVICES) { - pr_warning("received registration request for unknown " - "PMU device type %d\n", type); - return -EINVAL; - } - - if (pmu_devices[type]) { - pr_warning("rejecting duplicate registration of PMU device " - "type %d.", type); - return -ENOSPC; - } - - pr_info("registered new PMU device of type %d\n", type); - pmu_devices[type] = pdev; - return 0; -} - -#define OF_MATCH_PMU(_name, _type) { \ - .compatible = _name, \ - .data = (void *)_type, \ -} - -#define OF_MATCH_CPU(name) OF_MATCH_PMU(name, ARM_PMU_DEVICE_CPU) - -static struct of_device_id armpmu_of_device_ids[] = { - OF_MATCH_CPU("arm,cortex-a9-pmu"), - OF_MATCH_CPU("arm,cortex-a8-pmu"), - OF_MATCH_CPU("arm,arm1136-pmu"), - OF_MATCH_CPU("arm,arm1176-pmu"), - {}, -}; - -#define PLAT_MATCH_PMU(_name, _type) { \ - .name = _name, \ - .driver_data = _type, \ -} - -#define PLAT_MATCH_CPU(_name) PLAT_MATCH_PMU(_name, ARM_PMU_DEVICE_CPU) - -static struct platform_device_id armpmu_plat_device_ids[] = { - PLAT_MATCH_CPU("arm-pmu"), - {}, -}; - -enum arm_pmu_type armpmu_device_type(struct platform_device *pdev) -{ - const struct of_device_id *of_id; - const struct platform_device_id *pdev_id; - - /* provided by of_device_id table */ - if (pdev->dev.of_node) { - of_id = of_match_device(armpmu_of_device_ids, &pdev->dev); - BUG_ON(!of_id); - return (enum arm_pmu_type)of_id->data; - } - - /* Provided by platform_device_id table */ - pdev_id = platform_get_device_id(pdev); - BUG_ON(!pdev_id); - return pdev_id->driver_data; -} - -static int __devinit armpmu_device_probe(struct platform_device *pdev) -{ - return pmu_register(pdev, armpmu_device_type(pdev)); -} - -static struct platform_driver armpmu_driver = { - .driver = { - .name = "arm-pmu", - .of_match_table = armpmu_of_device_ids, - }, - .probe = armpmu_device_probe, - .id_table = armpmu_plat_device_ids, -}; - -static int __init register_pmu_driver(void) -{ - return platform_driver_register(&armpmu_driver); -} -device_initcall(register_pmu_driver); +/* + * PMU locking to ensure mutual exclusion between different subsystems. + */ +static unsigned long pmu_lock[BITS_TO_LONGS(ARM_NUM_PMU_DEVICES)]; -struct platform_device * +int reserve_pmu(enum arm_pmu_type type) { - struct platform_device *pdev; - - if (test_and_set_bit_lock(type, &pmu_lock)) { - pdev = ERR_PTR(-EBUSY); - } else if (pmu_devices[type] == NULL) { - clear_bit_unlock(type, &pmu_lock); - pdev = ERR_PTR(-ENODEV); - } else { - pdev = pmu_devices[type]; - } - - return pdev; + return test_and_set_bit_lock(type, pmu_lock) ? -EBUSY : 0; } EXPORT_SYMBOL_GPL(reserve_pmu); -int +void release_pmu(enum arm_pmu_type type) { - if (WARN_ON(!pmu_devices[type])) - return -EINVAL; - clear_bit_unlock(type, &pmu_lock); - return 0; -} -EXPORT_SYMBOL_GPL(release_pmu); - -static int -set_irq_affinity(int irq, - unsigned int cpu) -{ -#ifdef CONFIG_SMP - int err = irq_set_affinity(irq, cpumask_of(cpu)); - if (err) - pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n", - irq, cpu); - return err; -#else - return -EINVAL; -#endif -} - -static int -init_cpu_pmu(void) -{ - int i, irqs, err = 0; - struct platform_device *pdev = pmu_devices[ARM_PMU_DEVICE_CPU]; - - if (!pdev) - return -ENODEV; - - irqs = pdev->num_resources; - - /* - * If we have a single PMU interrupt that we can't shift, assume that - * we're running on a uniprocessor machine and continue. - */ - if (irqs == 1 && !irq_can_set_affinity(platform_get_irq(pdev, 0))) - return 0; - - for (i = 0; i < irqs; ++i) { - err = set_irq_affinity(platform_get_irq(pdev, i), i); - if (err) - break; - } - - return err; -} - -int -init_pmu(enum arm_pmu_type type) -{ - int err = 0; - - switch (type) { - case ARM_PMU_DEVICE_CPU: - err = init_cpu_pmu(); - break; - default: - pr_warning("attempt to initialise PMU of unknown " - "type %d\n", type); - err = -EINVAL; - } - - return err; + clear_bit_unlock(type, pmu_lock); } -EXPORT_SYMBOL_GPL(init_pmu); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index e514c76043b..6136144f8f8 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -820,25 +820,8 @@ static struct machine_desc * __init setup_machine_tags(unsigned int nr) if (__atags_pointer) tags = phys_to_virt(__atags_pointer); - else if (mdesc->boot_params) { -#ifdef CONFIG_MMU - /* - * We still are executing with a minimal MMU mapping created - * with the presumption that the machine default for this - * is located in the first MB of RAM. Anything else will - * fault and silently hang the kernel at this point. - */ - if (mdesc->boot_params < PHYS_OFFSET || - mdesc->boot_params >= PHYS_OFFSET + SZ_1M) { - printk(KERN_WARNING - "Default boot params at physical 0x%08lx out of reach\n", - mdesc->boot_params); - } else -#endif - { - tags = phys_to_virt(mdesc->boot_params); - } - } + else if (mdesc->atag_offset) + tags = (void *)(PAGE_OFFSET + mdesc->atag_offset); #if defined(CONFIG_DEPRECATED_PARAM_STRUCT) /* diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index dc902f2c684..020e99c845e 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -8,92 +8,61 @@ .text /* - * Save CPU state for a suspend - * r1 = v:p offset - * r2 = suspend function arg0 - * r3 = suspend function + * Save CPU state for a suspend. This saves the CPU general purpose + * registers, and allocates space on the kernel stack to save the CPU + * specific registers and some other data for resume. + * r0 = suspend function arg0 + * r1 = suspend function */ ENTRY(__cpu_suspend) stmfd sp!, {r4 - r11, lr} #ifdef MULTI_CPU ldr r10, =processor - ldr r5, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state - ldr ip, [r10, #CPU_DO_RESUME] @ virtual resume function + ldr r4, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state #else - ldr r5, =cpu_suspend_size - ldr ip, =cpu_do_resume + ldr r4, =cpu_suspend_size #endif - mov r6, sp @ current virtual SP - sub sp, sp, r5 @ allocate CPU state on stack - mov r0, sp @ save pointer to CPU save block - add ip, ip, r1 @ convert resume fn to phys - stmfd sp!, {r1, r6, ip} @ save v:p, virt SP, phys resume fn - ldr r5, =sleep_save_sp - add r6, sp, r1 @ convert SP to phys - stmfd sp!, {r2, r3} @ save suspend func arg and pointer + mov r5, sp @ current virtual SP + add r4, r4, #12 @ Space for pgd, virt sp, phys resume fn + sub sp, sp, r4 @ allocate CPU state on stack + stmfd sp!, {r0, r1} @ save suspend func arg and pointer + add r0, sp, #8 @ save pointer to save block + mov r1, r4 @ size of save block + mov r2, r5 @ virtual SP + ldr r3, =sleep_save_sp #ifdef CONFIG_SMP ALT_SMP(mrc p15, 0, lr, c0, c0, 5) ALT_UP(mov lr, #0) and lr, lr, #15 - str r6, [r5, lr, lsl #2] @ save phys SP -#else - str r6, [r5] @ save phys SP -#endif -#ifdef MULTI_CPU - mov lr, pc - ldr pc, [r10, #CPU_DO_SUSPEND] @ save CPU state -#else - bl cpu_do_suspend -#endif - - @ flush data cache -#ifdef MULTI_CACHE - ldr r10, =cpu_cache - mov lr, pc - ldr pc, [r10, #CACHE_FLUSH_KERN_ALL] -#else - bl __cpuc_flush_kern_all + add r3, r3, lr, lsl #2 #endif + bl __cpu_suspend_save adr lr, BSYM(cpu_suspend_abort) ldmfd sp!, {r0, pc} @ call suspend fn ENDPROC(__cpu_suspend) .ltorg cpu_suspend_abort: - ldmia sp!, {r1 - r3} @ pop v:p, virt SP, phys resume fn + ldmia sp!, {r1 - r3} @ pop phys pgd, virt SP, phys resume fn + teq r0, #0 + moveq r0, #1 @ force non-zero value mov sp, r2 ldmfd sp!, {r4 - r11, pc} ENDPROC(cpu_suspend_abort) /* * r0 = control register value - * r1 = v:p offset (preserved by cpu_do_resume) - * r2 = phys page table base - * r3 = L1 section flags */ + .align 5 ENTRY(cpu_resume_mmu) - adr r4, cpu_resume_turn_mmu_on - mov r4, r4, lsr #20 - orr r3, r3, r4, lsl #20 - ldr r5, [r2, r4, lsl #2] @ save old mapping - str r3, [r2, r4, lsl #2] @ setup 1:1 mapping for mmu code - sub r2, r2, r1 ldr r3, =cpu_resume_after_mmu - bic r1, r0, #CR_C @ ensure D-cache is disabled - b cpu_resume_turn_mmu_on -ENDPROC(cpu_resume_mmu) - .ltorg - .align 5 -cpu_resume_turn_mmu_on: - mcr p15, 0, r1, c1, c0, 0 @ turn on MMU, I-cache, etc - mrc p15, 0, r1, c0, c0, 0 @ read id reg - mov r1, r1 - mov r1, r1 + mcr p15, 0, r0, c1, c0, 0 @ turn on MMU, I-cache, etc + mrc p15, 0, r0, c0, c0, 0 @ read id reg + mov r0, r0 + mov r0, r0 mov pc, r3 @ jump to virtual address -ENDPROC(cpu_resume_turn_mmu_on) +ENDPROC(cpu_resume_mmu) cpu_resume_after_mmu: - str r5, [r2, r4, lsl #2] @ restore old mapping - mcr p15, 0, r0, c1, c0, 0 @ turn on D-cache bl cpu_init @ restore the und/abt/irq banked regs mov r0, #0 @ return zero on success ldmfd sp!, {r4 - r11, pc} @@ -119,7 +88,7 @@ ENTRY(cpu_resume) ldr r0, sleep_save_sp @ stack phys addr #endif setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1 @ set SVC, irqs off - @ load v:p, stack, resume fn + @ load phys pgd, stack, resume fn ARM( ldmia r0!, {r1, sp, pc} ) THUMB( ldmia r0!, {r1, r2, r3} ) THUMB( mov sp, r2 ) diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c new file mode 100644 index 00000000000..93a22d282c1 --- /dev/null +++ b/arch/arm/kernel/suspend.c @@ -0,0 +1,72 @@ +#include <linux/init.h> + +#include <asm/pgalloc.h> +#include <asm/pgtable.h> +#include <asm/memory.h> +#include <asm/suspend.h> +#include <asm/tlbflush.h> + +static pgd_t *suspend_pgd; + +extern int __cpu_suspend(unsigned long, int (*)(unsigned long)); +extern void cpu_resume_mmu(void); + +/* + * This is called by __cpu_suspend() to save the state, and do whatever + * flushing is required to ensure that when the CPU goes to sleep we have + * the necessary data available when the caches are not searched. + */ +void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr) +{ + *save_ptr = virt_to_phys(ptr); + + /* This must correspond to the LDM in cpu_resume() assembly */ + *ptr++ = virt_to_phys(suspend_pgd); + *ptr++ = sp; + *ptr++ = virt_to_phys(cpu_do_resume); + + cpu_do_suspend(ptr); + + flush_cache_all(); + outer_clean_range(*save_ptr, *save_ptr + ptrsz); + outer_clean_range(virt_to_phys(save_ptr), + virt_to_phys(save_ptr) + sizeof(*save_ptr)); +} + +/* + * Hide the first two arguments to __cpu_suspend - these are an implementation + * detail which platform code shouldn't have to know about. + */ +int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) +{ + struct mm_struct *mm = current->active_mm; + int ret; + + if (!suspend_pgd) + return -EINVAL; + + /* + * Provide a temporary page table with an identity mapping for + * the MMU-enable code, required for resuming. On successful + * resume (indicated by a zero return code), we need to switch + * back to the correct page tables. + */ + ret = __cpu_suspend(arg, fn); + if (ret == 0) { + cpu_switch_mm(mm->pgd, mm); + local_flush_tlb_all(); + } + + return ret; +} + +static int __init cpu_suspend_init(void) +{ + suspend_pgd = pgd_alloc(&init_mm); + if (suspend_pgd) { + unsigned long addr = virt_to_phys(cpu_resume_mmu); + identity_mapping_add(suspend_pgd, addr, addr + SECTION_SIZE); + } + return suspend_pgd ? 0 : -ENOMEM; +} +core_initcall(cpu_suspend_init); diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index e04c5fb6f1e..1532b508c81 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <linux/pm.h> +#include <linux/dma-mapping.h> #include <asm/irq.h> #include <asm/mach/arch.h> @@ -319,6 +320,7 @@ static void at91sam9g45_poweroff(void) static void __init at91sam9g45_map_io(void) { at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE); + init_consistent_dma_size(SZ_4M); } static void __init at91sam9g45_initialize(void) diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index 2c611b9a013..406bb649680 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -128,8 +128,6 @@ #define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */ #define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */ -#define CONSISTENT_DMA_SIZE SZ_4M - /* * DMA peripheral identifiers * for hardware handshaking interface diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S index bc1e0b2e2f4..0ed8648c645 100644 --- a/arch/arm/mach-at91/include/mach/debug-macro.S +++ b/arch/arm/mach-at91/include/mach/debug-macro.S @@ -14,7 +14,7 @@ #include <mach/hardware.h> #include <mach/at91_dbgu.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address) ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address) .endm diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h index ed78aabb8e9..6ae20a649a9 100644 --- a/arch/arm/mach-bcmring/include/mach/hardware.h +++ b/arch/arm/mach-bcmring/include/mach/hardware.h @@ -22,7 +22,6 @@ #define __ASM_ARCH_HARDWARE_H #include <asm/sizes.h> -#include <mach/memory.h> #include <cfg_global.h> #include <mach/csp/mm_io.h> @@ -31,7 +30,7 @@ * *_SIZE is the size of the region * *_BASE is the virtual address */ -#define RAM_START PLAT_PHYS_OFFSET +#define RAM_START PHYS_OFFSET #define RAM_SIZE (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED) #define RAM_BASE PAGE_OFFSET diff --git a/arch/arm/mach-bcmring/include/mach/memory.h b/arch/arm/mach-bcmring/include/mach/memory.h deleted file mode 100644 index 15162e4c75f..00000000000 --- a/arch/arm/mach-bcmring/include/mach/memory.h +++ /dev/null @@ -1,33 +0,0 @@ -/***************************************************************************** -* Copyright 2005 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include <cfg_global.h> - -/* - * Physical vs virtual RAM address space conversion. These are - * private definitions which should NOT be used outside memory.h - * files. Use virt_to_phys/phys_to_virt/__pa/__va instead. - */ - -#define PLAT_PHYS_OFFSET CFG_GLOBAL_RAM_BASE - -/* - * Maximum DMA memory allowed is 14M - */ -#define CONSISTENT_DMA_SIZE (SZ_16M - SZ_2M) - -#endif diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c index 0f1c37e4523..8616876abb9 100644 --- a/arch/arm/mach-bcmring/mm.c +++ b/arch/arm/mach-bcmring/mm.c @@ -13,6 +13,7 @@ *****************************************************************************/ #include <linux/platform_device.h> +#include <linux/dma-mapping.h> #include <asm/mach/map.h> #include <mach/hardware.h> @@ -53,4 +54,6 @@ void __init bcmring_map_io(void) { iotable_init(bcmring_io_desc, ARRAY_SIZE(bcmring_io_desc)); + /* Maximum DMA memory allowed is 14M */ + init_consistent_dma_size(14 << 20); } diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c index 4a74b2c959b..0276091b7f8 100644 --- a/arch/arm/mach-clps711x/autcpu12.c +++ b/arch/arm/mach-clps711x/autcpu12.c @@ -64,7 +64,7 @@ void __init autcpu12_map_io(void) MACHINE_START(AUTCPU12, "autronix autcpu12") /* Maintainer: Thomas Gleixner */ - .boot_params = 0xc0020000, + .atag_offset = 0x20000, .map_io = autcpu12_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c index 5a1689d4879..25b3bfd0e85 100644 --- a/arch/arm/mach-clps711x/cdb89712.c +++ b/arch/arm/mach-clps711x/cdb89712.c @@ -55,7 +55,7 @@ static void __init cdb89712_map_io(void) MACHINE_START(CDB89712, "Cirrus-CDB89712") /* Maintainer: Ray Lehtiniemi */ - .boot_params = 0xc0000100, + .atag_offset = 0x100, .map_io = cdb89712_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c index 16481cf3e93..1df9ec67aa9 100644 --- a/arch/arm/mach-clps711x/ceiva.c +++ b/arch/arm/mach-clps711x/ceiva.c @@ -56,7 +56,7 @@ static void __init ceiva_map_io(void) MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame") /* Maintainer: Rob Scott */ - .boot_params = 0xc0000100, + .atag_offset = 0x100, .map_io = ceiva_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c index 67b5abb4a60..06c8abd9371 100644 --- a/arch/arm/mach-clps711x/clep7312.c +++ b/arch/arm/mach-clps711x/clep7312.c @@ -37,7 +37,7 @@ fixup_clep7312(struct machine_desc *desc, struct tag *tags, MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312") /* Maintainer: Nobody */ - .boot_params = 0xc0000100, + .atag_offset = 0x0100, .fixup = fixup_clep7312, .map_io = clps711x_map_io, .init_irq = clps711x_init_irq, diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c index 98ca5b2e940..abf522d1ec9 100644 --- a/arch/arm/mach-clps711x/edb7211-arch.c +++ b/arch/arm/mach-clps711x/edb7211-arch.c @@ -57,7 +57,7 @@ fixup_edb7211(struct machine_desc *desc, struct tag *tags, MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") /* Maintainer: Jon McClintock */ - .boot_params = 0xc0020100, /* 0xc0000000 - 0xc001ffff can be video RAM */ + .atag_offset = 0x20100, /* 0xc0000000 - 0xc001ffff can be video RAM */ .fixup = fixup_edb7211, .map_io = edb7211_map_io, .reserve = edb7211_reserve, diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c index b1cb479e71e..b6f7d86bb1c 100644 --- a/arch/arm/mach-clps711x/fortunet.c +++ b/arch/arm/mach-clps711x/fortunet.c @@ -75,7 +75,6 @@ fortunet_fixup(struct machine_desc *desc, struct tag *tags, MACHINE_START(FORTUNET, "ARM-FortuNet") /* Maintainer: FortuNet Inc. */ - .boot_params = 0x00000000, .fixup = fortunet_fixup, .map_io = clps711x_map_io, .init_irq = clps711x_init_irq, diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S index 507c6873b7e..b802e8a5183 100644 --- a/arch/arm/mach-clps711x/include/mach/debug-macro.S +++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S @@ -14,7 +14,7 @@ #include <mach/hardware.h> #include <asm/hardware/clps7111.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp #ifndef CONFIG_DEBUG_CLPS711X_UART2 mov \rp, #0x0000 @ UART1 #else diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c index cefbce0480b..e7f75aeb1e5 100644 --- a/arch/arm/mach-clps711x/p720t.c +++ b/arch/arm/mach-clps711x/p720t.c @@ -89,7 +89,7 @@ static void __init p720t_map_io(void) MACHINE_START(P720T, "ARM-Prospector720T") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = 0xc0000100, + .atag_offset = 0x100, .fixup = fixup_p720t, .map_io = p720t_map_io, .init_irq = clps711x_init_irq, diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c index 3e7d1496cb4..55f7b4b08ab 100644 --- a/arch/arm/mach-cns3xxx/cns3420vb.c +++ b/arch/arm/mach-cns3xxx/cns3420vb.c @@ -197,7 +197,7 @@ static void __init cns3420_map_io(void) } MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board") - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = cns3420_map_io, .init_irq = cns3xxx_init_irq, .timer = &cns3xxx_timer, diff --git a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S index 56d828634db..d04c150baa1 100644 --- a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S +++ b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S @@ -10,7 +10,7 @@ * published by the Free Software Foundation. */ - .macro addruart,rp,rv + .macro addruart,rp,rv,tmp mov \rp, #0x00009000 orr \rv, \rp, #0xf0000000 @ virtual base orr \rp, \rp, #0x10000000 diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S index 6bd83ed90af..d87bfc397d3 100644 --- a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S +++ b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S @@ -8,7 +8,6 @@ * published by the Free Software Foundation. */ -#include <mach/hardware.h> #include <asm/hardware/entry-macro-gic.S> .macro disable_fiq diff --git a/arch/arm/mach-cns3xxx/include/mach/memory.h b/arch/arm/mach-cns3xxx/include/mach/memory.h deleted file mode 100644 index dc16c5c5d86..00000000000 --- a/arch/arm/mach-cns3xxx/include/mach/memory.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright 2003 ARM Limited - * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_MEMORY_H -#define __MACH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#define __phys_to_bus(x) ((x) + PHYS_OFFSET) -#define __bus_to_phys(x) ((x) - PHYS_OFFSET) - -#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v)) -#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b)) -#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p)) -#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b)) - -#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h index 58bb03ae3cf..4f16c9b79f7 100644 --- a/arch/arm/mach-cns3xxx/include/mach/system.h +++ b/arch/arm/mach-cns3xxx/include/mach/system.h @@ -13,7 +13,6 @@ #include <linux/io.h> #include <asm/proc-fns.h> -#include <mach/hardware.h> static inline void arch_idle(void) { diff --git a/arch/arm/mach-cns3xxx/include/mach/uncompress.h b/arch/arm/mach-cns3xxx/include/mach/uncompress.h index de8ead9b91f..a91b6058ab4 100644 --- a/arch/arm/mach-cns3xxx/include/mach/uncompress.h +++ b/arch/arm/mach-cns3xxx/include/mach/uncompress.h @@ -8,7 +8,6 @@ */ #include <asm/mach-types.h> -#include <mach/hardware.h> #include <mach/cns3xxx.h> #define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index 06fd25d70ae..0f8fca48a5e 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -49,7 +49,7 @@ static struct cns3xxx_pcie *sysdata_to_cnspci(void *sysdata) return &cns3xxx_pcie[root->domain]; } -static struct cns3xxx_pcie *pdev_to_cnspci(struct pci_dev *dev) +static struct cns3xxx_pcie *pdev_to_cnspci(const struct pci_dev *dev) { return sysdata_to_cnspci(dev->sysdata); } diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 84fd7868486..26d94c0b555 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -676,7 +676,7 @@ static void __init da830_evm_map_io(void) } MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM") - .boot_params = (DA8XX_DDR_BASE + 0x100), + .atag_offset = 0x100, .map_io = da830_evm_map_io, .init_irq = cp_intc_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index bd5394537c8..6e41cb5baeb 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -115,6 +115,32 @@ static struct spi_board_info da850evm_spi_info[] = { }, }; +#ifdef CONFIG_MTD +static void da850_evm_m25p80_notify_add(struct mtd_info *mtd) +{ + char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; + size_t retlen; + + if (!strcmp(mtd->name, "MAC-Address")) { + mtd->read(mtd, 0, ETH_ALEN, &retlen, mac_addr); + if (retlen == ETH_ALEN) + pr_info("Read MAC addr from SPI Flash: %pM\n", + mac_addr); + } +} + +static struct mtd_notifier da850evm_spi_notifier = { + .add = da850_evm_m25p80_notify_add, +}; + +static void da850_evm_setup_mac_addr(void) +{ + register_mtd_user(&da850evm_spi_notifier); +} +#else +static void da850_evm_setup_mac_addr(void) { } +#endif + static struct mtd_partition da850_evm_norflash_partition[] = { { .name = "bootloaders + env", @@ -1244,6 +1270,8 @@ static __init void da850_evm_init(void) if (ret) pr_warning("da850_evm_init: sata registration failed: %d\n", ret); + + da850_evm_setup_mac_addr(); } #ifdef CONFIG_SERIAL_8250_CONSOLE @@ -1263,7 +1291,7 @@ static void __init da850_evm_map_io(void) } MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM") - .boot_params = (DA8XX_DDR_BASE + 0x100), + .atag_offset = 0x100, .map_io = da850_evm_map_io, .init_irq = cp_intc_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 241a6bd6740..65566280b7c 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -351,7 +351,7 @@ static __init void dm355_evm_init(void) } MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM") - .boot_params = (0x80000100), + .atag_offset = 0x100, .map_io = dm355_evm_map_io, .init_irq = davinci_irq_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index bee284ca7fd..b307470b071 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -270,7 +270,7 @@ static __init void dm355_leopard_init(void) } MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard") - .boot_params = (0x80000100), + .atag_offset = 0x100, .map_io = dm355_leopard_map_io, .init_irq = davinci_irq_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 9818f214d4f..04c43abcca6 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -612,7 +612,7 @@ static __init void dm365_evm_init(void) } MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM") - .boot_params = (0x80000100), + .atag_offset = 0x100, .map_io = dm365_evm_map_io, .init_irq = davinci_irq_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 95607a191e0..a005e7691dd 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -712,7 +712,7 @@ static __init void davinci_evm_init(void) MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM") /* Maintainer: MontaVista Software <source@mvista.com> */ - .boot_params = (DAVINCI_DDR_BASE + 0x100), + .atag_offset = 0x100, .map_io = davinci_evm_map_io, .init_irq = davinci_irq_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 993a3146fd3..337c45e3e44 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -792,7 +792,7 @@ static __init void evm_init(void) } MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM") - .boot_params = (0x80000100), + .atag_offset = 0x100, .map_io = davinci_map_io, .init_irq = davinci_irq_init, .timer = &davinci_timer, @@ -801,7 +801,7 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM") MACHINE_END MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM") - .boot_params = (0x80000100), + .atag_offset = 0x100, .map_io = davinci_map_io, .init_irq = davinci_irq_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index c278226627a..6efc84cceca 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -566,7 +566,7 @@ static void __init mityomapl138_map_io(void) } MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808") - .boot_params = (DA8XX_DDR_BASE + 0x100), + .atag_offset = 0x100, .map_io = mityomapl138_map_io, .init_irq = cp_intc_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index d60a80028ba..38d6f644d8b 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -272,7 +272,7 @@ static __init void davinci_ntosd2_init(void) MACHINE_START(NEUROS_OSD2, "Neuros OSD2") /* Maintainer: Neuros Technologies <neuros@groups.google.com> */ - .boot_params = (DAVINCI_DDR_BASE + 0x100), + .atag_offset = 0x100, .map_io = davinci_ntosd2_map_io, .init_irq = davinci_irq_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 237332a1142..c6701e4a795 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -338,7 +338,7 @@ static void __init omapl138_hawk_map_io(void) } MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard") - .boot_params = (DA8XX_DDR_BASE + 0x100), + .atag_offset = 0x100, .map_io = omapl138_hawk_map_io, .init_irq = cp_intc_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 5f4385c0a08..5dd4da9d230 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -151,7 +151,7 @@ static __init void davinci_sffsdr_init(void) MACHINE_START(SFFSDR, "Lyrtech SFFSDR") /* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */ - .boot_params = (DAVINCI_DDR_BASE + 0x100), + .atag_offset = 0x100, .map_io = davinci_sffsdr_map_io, .init_irq = davinci_irq_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c index 78289206568..90ee7b5aabd 100644 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -277,7 +277,7 @@ console_initcall(tnetv107x_evm_console_init); #endif MACHINE_START(TNETV107X, "TNETV107X EVM") - .boot_params = (TNETV107X_DDR_BASE + 0x100), + .atag_offset = 0x100, .map_io = tnetv107x_init, .init_irq = cp_intc_init, .timer = &davinci_timer, diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index 1d255739423..865ffe5899a 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -12,6 +12,7 @@ #include <linux/io.h> #include <linux/etherdevice.h> #include <linux/davinci_emac.h> +#include <linux/dma-mapping.h> #include <asm/tlb.h> #include <asm/mach/map.h> @@ -86,6 +87,8 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info) iotable_init(davinci_soc_info.io_desc, davinci_soc_info.io_desc_num); + init_consistent_dma_size(14 << 20); + /* * Normally devicemaps_init() would flush caches and tlb after * mdesc->map_io(), but we must also do it here because of the CPU diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c index bd59f31b8a9..0b314bf16f7 100644 --- a/arch/arm/mach-davinci/cpuidle.c +++ b/arch/arm/mach-davinci/cpuidle.c @@ -19,7 +19,7 @@ #include <asm/proc-fns.h> #include <mach/cpuidle.h> -#include <mach/memory.h> +#include <mach/ddr2.h> #define DAVINCI_CPUIDLE_MAX_STATES 2 diff --git a/arch/arm/mach-davinci/include/mach/ddr2.h b/arch/arm/mach-davinci/include/mach/ddr2.h new file mode 100644 index 00000000000..c19e047d0e6 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/ddr2.h @@ -0,0 +1,4 @@ +#define DDR2_SDRCR_OFFSET 0xc +#define DDR2_SRPD_BIT (1 << 23) +#define DDR2_MCLKSTOPEN_BIT (1 << 30) +#define DDR2_LPMODEN_BIT (1 << 31) diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index f8b7ea4f623..cf94552d527 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -18,56 +18,50 @@ #include <linux/serial_reg.h> -#include <asm/memory.h> - #include <mach/serial.h> #define UART_SHIFT 2 -#define davinci_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET) -#define davinci_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET) - .pushsection .data davinci_uart_phys: .word 0 davinci_uart_virt: .word 0 .popsection - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp /* Use davinci_uart_phys/virt if already configured */ -10: mrc p15, 0, \rp, c1, c0 - tst \rp, #1 @ MMU enabled? - ldreq \rp, =davinci_uart_v2p(davinci_uart_phys) - ldrne \rp, =davinci_uart_phys - add \rv, \rp, #4 @ davinci_uart_virt - ldr \rp, [\rp, #0] - ldr \rv, [\rv, #0] +10: adr \rp, 99f @ get effective addr of 99f + ldr \rv, [\rp] @ get absolute addr of 99f + sub \rv, \rv, \rp @ offset between the two + ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys + sub \tmp, \rp, \rv @ make it effective + ldr \rp, [\tmp, #0] @ davinci_uart_phys + ldr \rv, [\tmp, #4] @ davinci_uart_virt cmp \rp, #0 @ is port configured? cmpne \rv, #0 - bne 99f @ already configured + bne 100f @ already configured /* Check the debug UART address set in uncompress.h */ - mrc p15, 0, \rp, c1, c0 - tst \rp, #1 @ MMU enabled? + and \rp, pc, #0xff000000 + ldr \rv, =DAVINCI_UART_INFO_OFS + add \rp, \rp, \rv /* Copy uart phys address from decompressor uart info */ - ldreq \rv, =davinci_uart_v2p(davinci_uart_phys) - ldrne \rv, =davinci_uart_phys - ldreq \rp, =DAVINCI_UART_INFO - ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO) - ldr \rp, [\rp, #0] - str \rp, [\rv] + ldr \rv, [\rp, #0] + str \rv, [\tmp, #0] /* Copy uart virt address from decompressor uart info */ - ldreq \rv, =davinci_uart_v2p(davinci_uart_virt) - ldrne \rv, =davinci_uart_virt - ldreq \rp, =DAVINCI_UART_INFO - ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO) - ldr \rp, [\rp, #4] - str \rp, [\rv] + ldr \rv, [\rp, #4] + str \rv, [\tmp, #4] b 10b -99: + + .align +99: .word . + .word davinci_uart_phys + .ltorg + +100: .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h deleted file mode 100644 index 78731944a70..00000000000 --- a/arch/arm/mach-davinci/include/mach/memory.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * DaVinci memory space definitions - * - * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/************************************************************************** - * Included Files - **************************************************************************/ -#include <asm/page.h> -#include <asm/sizes.h> - -/************************************************************************** - * Definitions - **************************************************************************/ -#define DAVINCI_DDR_BASE 0x80000000 -#define DA8XX_DDR_BASE 0xc0000000 - -#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx) -#error Cannot enable DaVinci and DA8XX platforms concurrently -#elif defined(CONFIG_ARCH_DAVINCI_DA8XX) -#define PLAT_PHYS_OFFSET DA8XX_DDR_BASE -#else -#define PLAT_PHYS_OFFSET DAVINCI_DDR_BASE -#endif - -#define DDR2_SDRCR_OFFSET 0xc -#define DDR2_SRPD_BIT BIT(23) -#define DDR2_MCLKSTOPEN_BIT BIT(30) -#define DDR2_LPMODEN_BIT BIT(31) - -/* - * Increase size of DMA-consistent memory region - */ -#define CONSISTENT_DMA_SIZE (14<<20) - -#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 47fd0bc3d3e..fa59c097223 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -243,7 +243,7 @@ #define PSC_STATE_DISABLE 2 #define PSC_STATE_ENABLE 3 -#define MDSTAT_STATE_MASK 0x1f +#define MDSTAT_STATE_MASK 0x3f #define MDCTL_FORCE BIT(31) #ifndef __ASSEMBLER__ diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index c9e6ce185a6..e347d88fef9 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -21,8 +21,9 @@ * macros in debug-macro.S. * * This area sits just below the page tables (see arch/arm/kernel/head.S). + * We define it as a relative offset from start of usable RAM. */ -#define DAVINCI_UART_INFO (PLAT_PHYS_OFFSET + 0x3ff8) +#define DAVINCI_UART_INFO_OFS 0x3ff8 #define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 78d80683cdc..9dc7cf9664f 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -43,7 +43,12 @@ static inline void flush(void) static inline void set_uart_info(u32 phys, void * __iomem virt) { - u32 *uart_info = (u32 *)(DAVINCI_UART_INFO); + /* + * Get address of some.bss variable and round it down + * a la CONFIG_AUTO_ZRELADDR. + */ + u32 ram_start = (u32)&uart & 0xf8000000; + u32 *uart_info = (u32 *)(ram_start + DAVINCI_UART_INFO_OFS); uart = (u32 *)phys; uart_info[0] = phys; diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S index fb5e72b532b..d4e9316ecac 100644 --- a/arch/arm/mach-davinci/sleep.S +++ b/arch/arm/mach-davinci/sleep.S @@ -22,7 +22,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <mach/psc.h> -#include <mach/memory.h> +#include <mach/ddr2.h> #include "clock.h" @@ -217,7 +217,11 @@ ddr2clk_stop_done: ENDPROC(davinci_ddr_psc_config) CACHE_FLUSH: - .word arm926_flush_kern_cache_all +#ifdef CONFIG_CPU_V6 + .word v6_flush_kern_cache_all +#else + .word arm926_flush_kern_cache_all +#endif ENTRY(davinci_cpu_suspend_sz) .word . - davinci_cpu_suspend diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c index 03e11f9dca9..c8a406f7e94 100644 --- a/arch/arm/mach-dove/cm-a510.c +++ b/arch/arm/mach-dove/cm-a510.c @@ -87,7 +87,7 @@ static void __init cm_a510_init(void) } MACHINE_START(CM_A510, "Compulab CM-A510 Board") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = cm_a510_init, .map_io = dove_map_io, .init_early = dove_init_early, diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c index 2ac34ecfa74..11ea34e4fc7 100644 --- a/arch/arm/mach-dove/dove-db-setup.c +++ b/arch/arm/mach-dove/dove-db-setup.c @@ -94,7 +94,7 @@ static void __init dove_db_init(void) } MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = dove_db_init, .map_io = dove_map_io, .init_early = dove_init_early, diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S index da8bf2bad3b..5929cbc5916 100644 --- a/arch/arm/mach-dove/include/mach/debug-macro.S +++ b/arch/arm/mach-dove/include/mach/debug-macro.S @@ -8,7 +8,7 @@ #include <mach/bridge-regs.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =DOVE_SB_REGS_PHYS_BASE ldr \rv, =DOVE_SB_REGS_VIRT_BASE orr \rp, \rp, #0x00012000 diff --git a/arch/arm/mach-dove/include/mach/memory.h b/arch/arm/mach-dove/include/mach/memory.h deleted file mode 100644 index bbc93fee6c7..00000000000 --- a/arch/arm/mach-dove/include/mach/memory.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * arch/arm/mach-dove/include/mach/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 087bc771ac2..d0ce8abdd4b 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -280,7 +280,7 @@ arch_initcall(ebsa110_init); MACHINE_START(EBSA110, "EBSA110") /* Maintainer: Russell King */ - .boot_params = 0x00000400, + .atag_offset = 0x400, .reserve_lp0 = 1, .reserve_lp2 = 1, .soft_reboot = 1, diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S index 7ef5690fd08..bb02c05e681 100644 --- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S +++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * **/ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0xf0000000 orr \rp, \rp, #0x00000be0 mov \rp, \rv diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c index 61b98ce4b67..0713448206a 100644 --- a/arch/arm/mach-ep93xx/adssphere.c +++ b/arch/arm/mach-ep93xx/adssphere.c @@ -33,7 +33,7 @@ static void __init adssphere_init_machine(void) MACHINE_START(ADSSPHERE, "ADS Sphere board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 9969bb115f6..257175edc57 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -240,7 +240,7 @@ static void __init edb93xx_init_machine(void) #ifdef CONFIG_MACH_EDB9301 MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board") /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -251,7 +251,7 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9302 MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board") /* Maintainer: George Kashperko <george@chas.com.ua> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -262,7 +262,7 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9302A MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -273,7 +273,7 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9307 MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board") /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -284,7 +284,7 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9307A MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board") /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -295,7 +295,7 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9312 MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board") /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -306,7 +306,7 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9315 MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -317,7 +317,7 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9315A MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c index 9bd3152bff9..45ee205856f 100644 --- a/arch/arm/mach-ep93xx/gesbc9312.c +++ b/arch/arm/mach-ep93xx/gesbc9312.c @@ -33,7 +33,7 @@ static void __init gesbc9312_init_machine(void) MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S index b25bc907636..af54e43132c 100644 --- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S @@ -11,7 +11,7 @@ */ #include <mach/ep93xx-regs.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =EP93XX_APB_PHYS_BASE @ Physical base ldr \rv, =EP93XX_APB_VIRT_BASE @ virtual base orr \rp, \rp, #0x000c0000 diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index 7adea6258ef..e72f7368876 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -77,7 +77,7 @@ static void __init micro9_init_machine(void) #ifdef CONFIG_MACH_MICRO9H MACHINE_START(MICRO9, "Contec Micro9-High") /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -88,7 +88,7 @@ MACHINE_END #ifdef CONFIG_MACH_MICRO9M MACHINE_START(MICRO9M, "Contec Micro9-Mid") /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -99,7 +99,7 @@ MACHINE_END #ifdef CONFIG_MACH_MICRO9L MACHINE_START(MICRO9L, "Contec Micro9-Lite") /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -110,7 +110,7 @@ MACHINE_END #ifdef CONFIG_MACH_MICRO9S MACHINE_START(MICRO9S, "Contec Micro9-Slim") /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index 8392e95d7ce..238bc603da8 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -65,8 +65,8 @@ static void __init simone_init_machine(void) } MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board") -/* Maintainer: Ryan Mallon */ - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + /* Maintainer: Ryan Mallon */ + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index 2e9c614757e..3bdf3a2e5ad 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -163,7 +163,7 @@ static void __init snappercl15_init_machine(void) MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15") /* Maintainer: Ryan Mallon */ - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index c2d2cf40ead..1ade3c34050 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -257,7 +257,7 @@ static void __init ts72xx_init_machine(void) MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ts72xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, diff --git a/arch/arm/mach-exynos4/include/mach/debug-macro.S b/arch/arm/mach-exynos4/include/mach/debug-macro.S index a442ef86116..6cacf16a67a 100644 --- a/arch/arm/mach-exynos4/include/mach/debug-macro.S +++ b/arch/arm/mach-exynos4/include/mach/debug-macro.S @@ -20,7 +20,7 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, = S3C_PA_UART ldr \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 diff --git a/arch/arm/mach-exynos4/mach-armlex4210.c b/arch/arm/mach-exynos4/mach-armlex4210.c index b482c6285fc..f0ca6c157d2 100644 --- a/arch/arm/mach-exynos4/mach-armlex4210.c +++ b/arch/arm/mach-exynos4/mach-armlex4210.c @@ -207,7 +207,7 @@ static void __init armlex4210_machine_init(void) MACHINE_START(ARMLEX4210, "ARMLEX4210") /* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = exynos4_init_irq, .map_io = armlex4210_map_io, .init_machine = armlex4210_machine_init, diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c index 43be71b799c..6e0536818bf 100644 --- a/arch/arm/mach-exynos4/mach-nuri.c +++ b/arch/arm/mach-exynos4/mach-nuri.c @@ -1152,7 +1152,7 @@ static void __init nuri_machine_init(void) MACHINE_START(NURI, "NURI") /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = exynos4_init_irq, .map_io = nuri_map_io, .init_machine = nuri_machine_init, diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c index a7c65e05c1e..b24ddd7ad8f 100644 --- a/arch/arm/mach-exynos4/mach-smdkc210.c +++ b/arch/arm/mach-exynos4/mach-smdkc210.c @@ -301,7 +301,7 @@ static void __init smdkc210_machine_init(void) MACHINE_START(SMDKC210, "SMDKC210") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = exynos4_init_irq, .map_io = smdkc210_map_io, .init_machine = smdkc210_machine_init, diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c index ea414955686..d90fcddbee1 100644 --- a/arch/arm/mach-exynos4/mach-smdkv310.c +++ b/arch/arm/mach-exynos4/mach-smdkv310.c @@ -255,7 +255,7 @@ static void __init smdkv310_machine_init(void) MACHINE_START(SMDKV310, "SMDKV310") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = exynos4_init_irq, .map_io = smdkv310_map_io, .init_machine = smdkv310_machine_init, diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c index b3b5d891100..2aac6f755c8 100644 --- a/arch/arm/mach-exynos4/mach-universal_c210.c +++ b/arch/arm/mach-exynos4/mach-universal_c210.c @@ -762,7 +762,7 @@ static void __init universal_machine_init(void) MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = exynos4_init_irq, .map_io = universal_map_io, .init_machine = universal_machine_init, diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c index 5b1a8db779b..a3da5d1106c 100644 --- a/arch/arm/mach-footbridge/cats-hw.c +++ b/arch/arm/mach-footbridge/cats-hw.c @@ -86,7 +86,7 @@ fixup_cats(struct machine_desc *desc, struct tag *tags, MACHINE_START(CATS, "Chalice-CATS") /* Maintainer: Philip Blundell */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .soft_reboot = 1, .fixup = fixup_cats, .map_io = footbridge_map_io, diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c index 2ef69ff44ba..012210cf7d1 100644 --- a/arch/arm/mach-footbridge/ebsa285.c +++ b/arch/arm/mach-footbridge/ebsa285.c @@ -15,7 +15,7 @@ MACHINE_START(EBSA285, "EBSA285") /* Maintainer: Russell King */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .video_start = 0x000a0000, .video_end = 0x000bffff, .map_io = footbridge_map_io, diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S index 1be2eeb7a0a..e5acde25ffc 100644 --- a/arch/arm/mach-footbridge/include/mach/debug-macro.S +++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S @@ -15,7 +15,7 @@ #ifndef CONFIG_DEBUG_DC21285_PORT /* For NetWinder debugging */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x000003f8 orr \rv, \rp, #0xff000000 @ virtual orr \rp, \rp, #0x7c000000 @ physical @@ -31,7 +31,7 @@ .equ dc21285_high, ARMCSR_BASE & 0xff000000 .equ dc21285_low, ARMCSR_BASE & 0x00ffffff - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp .if dc21285_low mov \rp, #dc21285_low .else diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c index 06e514f372d..d8c1c922e24 100644 --- a/arch/arm/mach-footbridge/netwinder-hw.c +++ b/arch/arm/mach-footbridge/netwinder-hw.c @@ -648,7 +648,7 @@ fixup_netwinder(struct machine_desc *desc, struct tag *tags, MACHINE_START(NETWINDER, "Rebel-NetWinder") /* Maintainer: Russell King/Rebel.com */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .video_start = 0x000a0000, .video_end = 0x000bffff, .reserve_lp0 = 1, diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c index 3285e91ca8c..f41dba39b32 100644 --- a/arch/arm/mach-footbridge/personal.c +++ b/arch/arm/mach-footbridge/personal.c @@ -15,7 +15,7 @@ MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer") /* Maintainer: Jamey Hicks / George France */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = footbridge_map_io, .init_irq = footbridge_init_irq, .timer = &footbridge_timer, diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c index 0cf7a07c3f3..5927d3c253a 100644 --- a/arch/arm/mach-gemini/board-nas4220b.c +++ b/arch/arm/mach-gemini/board-nas4220b.c @@ -102,7 +102,7 @@ static void __init ib4220b_init(void) } MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B") - .boot_params = 0x100, + .atag_offset = 0x100, .map_io = gemini_map_io, .init_irq = gemini_init_irq, .timer = &ib4220b_timer, diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c index 4fa09af9949..cd7437a1cea 100644 --- a/arch/arm/mach-gemini/board-rut1xx.c +++ b/arch/arm/mach-gemini/board-rut1xx.c @@ -86,7 +86,7 @@ static void __init rut1xx_init(void) } MACHINE_START(RUT100, "Teltonika RUT100") - .boot_params = 0x100, + .atag_offset = 0x100, .map_io = gemini_map_io, .init_irq = gemini_init_irq, .timer = &rut1xx_timer, diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c index 88cc422ee44..a367880368f 100644 --- a/arch/arm/mach-gemini/board-wbd111.c +++ b/arch/arm/mach-gemini/board-wbd111.c @@ -129,7 +129,7 @@ static void __init wbd111_init(void) } MACHINE_START(WBD111, "Wiliboard WBD-111") - .boot_params = 0x100, + .atag_offset = 0x100, .map_io = gemini_map_io, .init_irq = gemini_init_irq, .timer = &wbd111_timer, diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c index 3a220347bc8..f382811c131 100644 --- a/arch/arm/mach-gemini/board-wbd222.c +++ b/arch/arm/mach-gemini/board-wbd222.c @@ -129,7 +129,7 @@ static void __init wbd222_init(void) } MACHINE_START(WBD222, "Wiliboard WBD-222") - .boot_params = 0x100, + .atag_offset = 0x100, .map_io = gemini_map_io, .init_irq = gemini_init_irq, .timer = &wbd222_timer, diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S index f40e006d296..837670763b8 100644 --- a/arch/arm/mach-gemini/include/mach/debug-macro.S +++ b/arch/arm/mach-gemini/include/mach/debug-macro.S @@ -11,7 +11,7 @@ */ #include <mach/hardware.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =GEMINI_UART_BASE @ physical ldr \rv, =IO_ADDRESS(GEMINI_UART_BASE) @ virtual .endm diff --git a/arch/arm/mach-gemini/include/mach/memory.h b/arch/arm/mach-gemini/include/mach/memory.h deleted file mode 100644 index a50915f764d..00000000000 --- a/arch/arm/mach-gemini/include/mach/memory.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (C) 2001-2006 Storlink, Corp. - * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef __MACH_MEMORY_H -#define __MACH_MEMORY_H - -#ifdef CONFIG_GEMINI_MEM_SWAP -# define PLAT_PHYS_OFFSET UL(0x00000000) -#else -# define PLAT_PHYS_OFFSET UL(0x10000000) -#endif - -#endif /* __MACH_MEMORY_H */ diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c index 65f1bea958e..9886f19805f 100644 --- a/arch/arm/mach-h720x/h7201-eval.c +++ b/arch/arm/mach-h720x/h7201-eval.c @@ -29,7 +29,7 @@ MACHINE_START(H7201, "Hynix GMS30C7201") /* Maintainer: Robert Schwebel, Pengutronix */ - .boot_params = 0xc0001000, + .atag_offset = 0x1000, .map_io = h720x_map_io, .init_irq = h720x_init_irq, .timer = &h7201_timer, diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c index 884584a0975..284a134819e 100644 --- a/arch/arm/mach-h720x/h7202-eval.c +++ b/arch/arm/mach-h720x/h7202-eval.c @@ -71,7 +71,7 @@ static void __init init_eval_h7202(void) MACHINE_START(H7202, "Hynix HMS30C7202") /* Maintainer: Robert Schwebel, Pengutronix */ - .boot_params = 0x40000100, + .atag_offset = 0x100, .map_io = h720x_map_io, .init_irq = h7202_init_irq, .timer = &h7202_timer, diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S index c2093e83572..8a46157b058 100644 --- a/arch/arm/mach-h720x/include/mach/debug-macro.S +++ b/arch/arm/mach-h720x/include/mach/debug-macro.S @@ -16,7 +16,7 @@ .equ io_virt, IO_VIRT .equ io_phys, IO_PHYS - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00020000 @ UART1 add \rv, \rp, #io_virt @ virtual address add \rp, \rp, #io_phys @ physical base address diff --git a/arch/arm/mach-h720x/include/mach/memory.h b/arch/arm/mach-h720x/include/mach/memory.h deleted file mode 100644 index 96dcf50c51d..00000000000 --- a/arch/arm/mach-h720x/include/mach/memory.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/memory.h - * - * Copyright (c) 2000 Jungjun Kim - * - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x40000000) -#endif diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index ede2710f8b7..21525908394 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -558,7 +558,7 @@ static struct sys_timer armadillo5x0_timer = { MACHINE_START(ARMADILLO5X0, "Armadillo-500") /* Maintainer: Alberto Panizzo */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index f851fe90368..b1ec2cf53bb 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -311,7 +311,7 @@ static struct sys_timer eukrea_cpuimx27_timer = { }; MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27") - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 4bd083ba9af..470b654b0e6 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -194,7 +194,7 @@ struct sys_timer eukrea_cpuimx35_timer = { MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35") /* Maintainer: Eukrea Electromatique */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index 2442d5da883..9163318e95a 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -163,7 +163,7 @@ static struct sys_timer eukrea_cpuimx25_timer = { MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25") /* Maintainer: Eukrea Electromatique */ - .boot_params = MX25_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx25_map_io, .init_early = imx25_init_early, .init_irq = mx25_init_irq, diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 6778f8193bc..22306ce2865 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -275,7 +275,7 @@ static struct sys_timer visstrim_m10_timer = { }; MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c index 272f793e924..8da48b33fc5 100644 --- a/arch/arm/mach-imx/mach-imx27ipcam.c +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -71,7 +71,7 @@ static struct sys_timer mx27ipcam_timer = { MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM") /* maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index d81a769fe89..21a14a20e2c 100644 --- a/arch/arm/mach-imx/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -77,7 +77,7 @@ static struct sys_timer mx27lite_timer = { }; MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE") - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index e472a1d8805..7c20e9e5800 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -271,7 +271,7 @@ static struct sys_timer kzm_timer = { }; MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = kzm_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 5cd8bee4696..530ea08dbaf 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -145,7 +145,7 @@ struct sys_timer mx1ads_timer = { MACHINE_START(MX1ADS, "Freescale MX1ADS") /* Maintainer: Sascha Hauer, Pengutronix */ - .boot_params = MX1_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, @@ -154,7 +154,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS") MACHINE_END MACHINE_START(MXLADS, "Freescale MXLADS") - .boot_params = MX1_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index d389ecf9b5a..e56828da26b 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -305,7 +305,7 @@ static struct sys_timer mx21ads_timer = { MACHINE_START(MX21ADS, "Freescale i.MX21ADS") /* maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX21_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx21ads_map_io, .init_early = imx21_init_early, .init_irq = mx21_init_irq, diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index 7f66a91df36..dd25ee82e70 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -253,7 +253,7 @@ static struct sys_timer mx25pdk_timer = { MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX25_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx25_map_io, .init_early = imx25_init_early, .init_irq = mx25_init_irq, diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 6fa6934ab15..2eafbac2c76 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -421,7 +421,7 @@ static struct sys_timer mx27pdk_timer = { MACHINE_START(MX27_3DS, "Freescale MX27PDK") /* maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index fc26ed71b9e..efe6109099f 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -345,7 +345,7 @@ static void __init mx27ads_map_io(void) MACHINE_START(MX27ADS, "Freescale i.MX27ADS") /* maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27ads_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index c20be753092..589066fb331 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -764,7 +764,7 @@ static void __init mx31_3ds_reserve(void) MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index 29ca8907a78..910c4561d35 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -535,7 +535,7 @@ static struct sys_timer mx31ads_timer = { MACHINE_START(MX31ADS, "Freescale MX31ADS") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx31ads_map_io, .init_early = imx31_init_early, .init_irq = mx31ads_init_irq, diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 126913ad106..e92eaf91a7b 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -295,7 +295,7 @@ static struct sys_timer mx31lilly_timer = { }; MACHINE_START(LILLY1131, "INCO startec LILLY-1131") - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index 4b47fd9fdd8..5242cb78b56 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -280,7 +280,7 @@ struct sys_timer mx31lite_timer = { MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx31lite_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index b358383120e..1d01ef28f25 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -567,7 +567,7 @@ static void __init mx31moboard_reserve(void) MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") /* Maintainer: Valentin Longchamp, EPFL Mobots group */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .reserve = mx31moboard_reserve, .map_io = mx31_map_io, .init_early = imx31_init_early, diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index b3b9bd8ac2a..f2a873dc08c 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -217,7 +217,7 @@ struct sys_timer mx35pdk_timer = { MACHINE_START(MX35_3DS, "Freescale MX35PDK") /* Maintainer: Freescale Semiconductor, Inc */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index c85876fed66..5ec3989704f 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -267,7 +267,7 @@ static struct sys_timer mxt_td60_timer = { MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60") /* maintainer: Maxtrack Industrial */ - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index 71083aa1603..0f6bd119903 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -435,7 +435,7 @@ static struct sys_timer pca100_timer = { }; MACHINE_START(PCA100, "phyCARD-i.MX27") - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index f45b7cd72c8..186d4eb9079 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -688,7 +688,7 @@ static void __init pcm037_reserve(void) MACHINE_START(PCM037, "Phytec Phycore pcm037") /* Maintainer: Pengutronix */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .reserve = pcm037_reserve, .map_io = mx31_map_io, .init_early = imx31_init_early, diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 2d6a64bbac4..091bcf87e1a 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -349,7 +349,7 @@ static struct sys_timer pcm038_timer = { }; MACHINE_START(PCM038, "phyCORE-i.MX27") - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 660ec3e80cf..0a4d31de773 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -418,7 +418,7 @@ struct sys_timer pcm043_timer = { MACHINE_START(PCM043, "Phytec Phycore pcm043") /* Maintainer: Pengutronix */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 3626f486498..9e11359c324 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -262,7 +262,7 @@ static struct sys_timer qong_timer = { MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") /* Maintainer: DENX Software Engineering GmbH */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index db2d60470e1..85d32845ee1 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -137,7 +137,7 @@ static struct sys_timer scb9328_timer = { MACHINE_START(SCB9328, "Synertronixx scb9328") /* Sascha Hauer */ - .boot_params = 0x08000100, + .atag_offset = 100, .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S index a1f598fd3a5..411b116077e 100644 --- a/arch/arm/mach-integrator/include/mach/debug-macro.S +++ b/arch/arm/mach-integrator/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x16000000 @ physical base address mov \rv, #0xf0000000 @ virtual base add \rv, \rv, #0x16000000 >> 4 diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index fcf0ae95651..b19ae180556 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -457,7 +457,7 @@ static struct sys_timer ap_timer = { MACHINE_START(INTEGRATOR, "ARM-Integrator") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .reserve = integrator_reserve, .map_io = ap_map_io, .init_early = integrator_init_early, diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 4eb03ab5cb4..5de49c33e4d 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -492,7 +492,7 @@ static struct sys_timer cp_timer = { MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .reserve = integrator_reserve, .map_io = intcp_map_io, .init_early = intcp_init_early, diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S index e664466d51b..d869a6f67e5 100644 --- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S +++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * published by the Free Software Foundation. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00002300 orr \rp, \rp, #0x00000040 orr \rv, \rp, #0xfe000000 @ virtual diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c index 23dfaffc586..4cf2cc477ea 100644 --- a/arch/arm/mach-iop13xx/iq81340mc.c +++ b/arch/arm/mach-iop13xx/iq81340mc.c @@ -91,7 +91,7 @@ static struct sys_timer iq81340mc_timer = { MACHINE_START(IQ81340MC, "Intel IQ81340MC") /* Maintainer: Dan Williams <dan.j.williams@intel.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = iop13xx_map_io, .init_irq = iop13xx_init_irq, .timer = &iq81340mc_timer, diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c index df3492a9c28..cd9e27499a1 100644 --- a/arch/arm/mach-iop13xx/iq81340sc.c +++ b/arch/arm/mach-iop13xx/iq81340sc.c @@ -93,7 +93,7 @@ static struct sys_timer iq81340sc_timer = { MACHINE_START(IQ81340SC, "Intel IQ81340SC") /* Maintainer: Dan Williams <dan.j.williams@intel.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = iop13xx_map_io, .init_irq = iop13xx_init_irq, .timer = &iq81340sc_timer, diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c index 6cbffbfc2bb..4325055d4e1 100644 --- a/arch/arm/mach-iop32x/em7210.c +++ b/arch/arm/mach-iop32x/em7210.c @@ -203,7 +203,7 @@ static void __init em7210_init_machine(void) } MACHINE_START(EM7210, "Lanner EM7210") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = em7210_map_io, .init_irq = iop32x_init_irq, .timer = &em7210_timer, diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c index ceef5d4dce1..0edc8802057 100644 --- a/arch/arm/mach-iop32x/glantank.c +++ b/arch/arm/mach-iop32x/glantank.c @@ -207,7 +207,7 @@ static void __init glantank_init_machine(void) MACHINE_START(GLANTANK, "GLAN Tank") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = glantank_map_io, .init_irq = iop32x_init_irq, .timer = &glantank_timer, diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S index ff9e76c09f3..363bdf90b34 100644 --- a/arch/arm/mach-iop32x/include/mach/debug-macro.S +++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * published by the Free Software Foundation. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0xfe000000 @ physical as well as virtual orr \rp, \rp, #0x00800000 @ location of the UART mov \rv, \rp diff --git a/arch/arm/mach-iop32x/include/mach/memory.h b/arch/arm/mach-iop32x/include/mach/memory.h deleted file mode 100644 index 169cc239f76..00000000000 --- a/arch/arm/mach-iop32x/include/mach/memory.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-iop32x/include/mach/memory.h - */ - -#ifndef __MEMORY_H -#define __MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0xa0000000) - -#endif diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c index 3a62514dae7..9e7aaccfeba 100644 --- a/arch/arm/mach-iop32x/iq31244.c +++ b/arch/arm/mach-iop32x/iq31244.c @@ -313,7 +313,7 @@ __setup("force_ep80219", force_ep80219_setup); MACHINE_START(IQ31244, "Intel IQ31244") /* Maintainer: Intel Corp. */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = iq31244_map_io, .init_irq = iop32x_init_irq, .timer = &iq31244_timer, @@ -327,7 +327,7 @@ MACHINE_END */ MACHINE_START(EP80219, "Intel EP80219") /* Maintainer: Intel Corp. */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = iq31244_map_io, .init_irq = iop32x_init_irq, .timer = &iq31244_timer, diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c index 35b7e6914d3..53ea86f649d 100644 --- a/arch/arm/mach-iop32x/iq80321.c +++ b/arch/arm/mach-iop32x/iq80321.c @@ -186,7 +186,7 @@ static void __init iq80321_init_machine(void) MACHINE_START(IQ80321, "Intel IQ80321") /* Maintainer: Intel Corp. */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = iq80321_map_io, .init_irq = iop32x_init_irq, .timer = &iq80321_timer, diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index 1a374eab600..d7269279968 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -327,7 +327,7 @@ static void __init n2100_init_machine(void) MACHINE_START(N2100, "Thecus N2100") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = n2100_map_io, .init_irq = iop32x_init_irq, .timer = &n2100_timer, diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S index 40c500dd1fa..361be1f6026 100644 --- a/arch/arm/mach-iop33x/include/mach/debug-macro.S +++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * published by the Free Software Foundation. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00ff0000 orr \rp, \rp, #0x0000f700 orr \rv, #0xfe000000 @ virtual diff --git a/arch/arm/mach-iop33x/include/mach/memory.h b/arch/arm/mach-iop33x/include/mach/memory.h deleted file mode 100644 index 8e1daf7006b..00000000000 --- a/arch/arm/mach-iop33x/include/mach/memory.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-iop33x/include/mach/memory.h - */ - -#ifndef __MEMORY_H -#define __MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c index 637c0272d5e..9e14ccc56f8 100644 --- a/arch/arm/mach-iop33x/iq80331.c +++ b/arch/arm/mach-iop33x/iq80331.c @@ -141,7 +141,7 @@ static void __init iq80331_init_machine(void) MACHINE_START(IQ80331, "Intel IQ80331") /* Maintainer: Intel Corp. */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = iop3xx_map_io, .init_irq = iop33x_init_irq, .timer = &iq80331_timer, diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c index 90a0436d725..09c899a2523 100644 --- a/arch/arm/mach-iop33x/iq80332.c +++ b/arch/arm/mach-iop33x/iq80332.c @@ -141,7 +141,7 @@ static void __init iq80332_init_machine(void) MACHINE_START(IQ80332, "Intel IQ80332") /* Maintainer: Intel Corp. */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = iop3xx_map_io, .init_irq = iop33x_init_irq, .timer = &iq80332_timer, diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index 62c60ade527..af9994537e0 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -254,7 +254,7 @@ static void __init enp2611_init_machine(void) MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = enp2611_map_io, .init_irq = ixp2000_init_irq, .timer = &enp2611_timer, diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S index 0ef533b2097..bdd3ccdc289 100644 --- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00030000 #ifdef __ARMEB__ orr \rp, \rp, #0x00000003 diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c index 5bad1a8419b..f7dfd970014 100644 --- a/arch/arm/mach-ixp2000/ixdp2400.c +++ b/arch/arm/mach-ixp2000/ixdp2400.c @@ -171,7 +171,7 @@ void __init ixdp2400_init_irq(void) MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform") /* Maintainer: MontaVista Software, Inc. */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = ixdp2x00_map_io, .init_irq = ixdp2400_init_irq, .timer = &ixdp2400_timer, diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c index 3d3cef87646..d33bcac1ec9 100644 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -286,7 +286,7 @@ void __init ixdp2800_init_irq(void) MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform") /* Maintainer: MontaVista Software, Inc. */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = ixdp2x00_map_io, .init_irq = ixdp2800_init_irq, .timer = &ixdp2800_timer, diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index be2a254f137..61a28676b5b 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -417,7 +417,7 @@ static void __init ixdp2x01_init_machine(void) #ifdef CONFIG_ARCH_IXDP2401 MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform") /* Maintainer: MontaVista Software, Inc. */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = ixdp2x01_map_io, .init_irq = ixdp2x01_init_irq, .timer = &ixdp2x01_timer, @@ -428,7 +428,7 @@ MACHINE_END #ifdef CONFIG_ARCH_IXDP2801 MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform") /* Maintainer: MontaVista Software, Inc. */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = ixdp2x01_map_io, .init_irq = ixdp2x01_init_irq, .timer = &ixdp2x01_timer, @@ -441,7 +441,7 @@ MACHINE_END */ MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform") /* Maintainer: MontaVista Software, Inc. */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = ixdp2x01_map_io, .init_irq = ixdp2x01_init_irq, .timer = &ixdp2x01_timer, diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c index e25e5fe183b..30dd31652e9 100644 --- a/arch/arm/mach-ixp23xx/espresso.c +++ b/arch/arm/mach-ixp23xx/espresso.c @@ -88,6 +88,6 @@ MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso") .map_io = ixp23xx_map_io, .init_irq = ixp23xx_init_irq, .timer = &ixp23xx_timer, - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = espresso_init, MACHINE_END diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S index f7c6eef7fa2..5ff524c1374 100644 --- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S @@ -12,7 +12,7 @@ */ #include <mach/ixp23xx.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =IXP23XX_PERIPHERAL_PHYS @ physical ldr \rv, =IXP23XX_PERIPHERAL_VIRT @ virtual #ifdef __ARMEB__ diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c index ec028e35f40..b3a57e0f341 100644 --- a/arch/arm/mach-ixp23xx/ixdp2351.c +++ b/arch/arm/mach-ixp23xx/ixdp2351.c @@ -331,6 +331,6 @@ MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform") .map_io = ixdp2351_map_io, .init_irq = ixdp2351_init_irq, .timer = &ixp23xx_timer, - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = ixdp2351_init, MACHINE_END diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c index 844551d2368..8f4dcbba902 100644 --- a/arch/arm/mach-ixp23xx/roadrunner.c +++ b/arch/arm/mach-ixp23xx/roadrunner.c @@ -175,6 +175,6 @@ MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform") .map_io = ixp23xx_map_io, .init_irq = ixp23xx_init_irq, .timer = &ixp23xx_timer, - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = roadrunner_init, MACHINE_END diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c index ee19c1d383a..37609a22c45 100644 --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c @@ -167,7 +167,7 @@ MACHINE_START(AVILA, "Gateworks Avila Network Platform") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = avila_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, @@ -185,7 +185,7 @@ MACHINE_START(LOFT, "Giant Shoulder Inc Loft board") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = avila_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c index e24564b5d93..81dfec31842 100644 --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c @@ -112,7 +112,7 @@ MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = coyote_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, @@ -130,7 +130,7 @@ MACHINE_START(IXDPG425, "Intel IXDPG425") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = coyote_init, MACHINE_END #endif diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 03e54515e8b..71607a7ecc7 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -279,7 +279,7 @@ static void __init dsmg600_init(void) MACHINE_START(DSMG600, "D-Link DSM-G600 RevA") /* Maintainer: www.nslu2-linux.org */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &dsmg600_timer, diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c index 23a8b361456..a9540cd9037 100644 --- a/arch/arm/mach-ixp4xx/fsg-setup.c +++ b/arch/arm/mach-ixp4xx/fsg-setup.c @@ -273,7 +273,7 @@ MACHINE_START(FSG, "Freecom FSG-3") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = fsg_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c index d4f851bdd9a..d69d1b053bb 100644 --- a/arch/arm/mach-ixp4xx/gateway7001-setup.c +++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c @@ -99,7 +99,7 @@ MACHINE_START(GATEWAY7001, "Gateway 7001 AP") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = gateway7001_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c index 7548d9a2efe..bf6678d1a92 100644 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -499,7 +499,7 @@ MACHINE_START(GORAMO_MLR, "MultiLink") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = gmlr_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c index 3790dffd3c3..aa029fc1914 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -167,7 +167,7 @@ MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = gtwx5715_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S index b974a49c0af..8c9f8d56449 100644 --- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S @@ -10,7 +10,7 @@ * published by the Free Software Foundation. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp #ifdef __ARMEB__ mov \rp, #3 @ Uart regs are at off set of 3 if @ byte writes used - Big Endian. diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h deleted file mode 100644 index 4caf1761f1e..00000000000 --- a/arch/arm/mach-ixp4xx/include/mach/memory.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/memory.h - * - * Copyright (c) 2001-2004 MontaVista Software, Inc. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include <asm/sizes.h> - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 6a2927956bf..f235f829dfa 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -256,7 +256,7 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = ixdp425_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, @@ -270,7 +270,7 @@ MACHINE_START(IXDP465, "Intel IXDP465 Development Platform") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = ixdp425_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, @@ -284,7 +284,7 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = ixdp425_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, @@ -298,7 +298,7 @@ MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = ixdp425_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index afb51879d9a..9f4669260d4 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -314,7 +314,7 @@ static void __init nas100d_init(void) MACHINE_START(NAS100D, "Iomega NAS 100d") /* Maintainer: www.nslu2-linux.org */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index 69e40f2cf09..3676fbf6ef9 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -300,7 +300,7 @@ static void __init nslu2_init(void) MACHINE_START(NSLU2, "Linksys NSLU2") /* Maintainer: www.nslu2-linux.org */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &nslu2_timer, diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c index 045336c833a..27e469ef452 100644 --- a/arch/arm/mach-ixp4xx/vulcan-setup.c +++ b/arch/arm/mach-ixp4xx/vulcan-setup.c @@ -239,7 +239,7 @@ MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = vulcan_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c index 40b9fad800b..b14144b967a 100644 --- a/arch/arm/mach-ixp4xx/wg302v2-setup.c +++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c @@ -100,7 +100,7 @@ MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2") .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .atag_offset = 0x100, .init_machine = wg302v2_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c index 043cfd5e140..f457e07a65f 100644 --- a/arch/arm/mach-kirkwood/d2net_v2-setup.c +++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c @@ -221,7 +221,7 @@ static void __init d2net_v2_init(void) } MACHINE_START(D2NET_V2, "LaCie d2 Network v2") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = d2net_v2_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c index bff04e04d67..ff4c21c1f92 100644 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c @@ -97,7 +97,7 @@ subsys_initcall(db88f6281_pci_init); MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board") /* Maintainer: Saeed Bishara <saeed@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = db88f6281_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c index f14dfb8508c..e4d199b2b1e 100644 --- a/arch/arm/mach-kirkwood/dockstar-setup.c +++ b/arch/arm/mach-kirkwood/dockstar-setup.c @@ -102,7 +102,7 @@ static void __init dockstar_init(void) } MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = dockstar_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c index 41d1b40696a..6c40f784b51 100644 --- a/arch/arm/mach-kirkwood/guruplug-setup.c +++ b/arch/arm/mach-kirkwood/guruplug-setup.c @@ -121,7 +121,7 @@ static void __init guruplug_init(void) MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board") /* Maintainer: Siddarth Gore <gores@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = guruplug_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S index db06ae437d0..f785d401a60 100644 --- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S +++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S @@ -8,7 +8,7 @@ #include <mach/bridge-regs.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =KIRKWOOD_REGS_PHYS_BASE ldr \rv, =KIRKWOOD_REGS_VIRT_BASE orr \rp, \rp, #0x00012000 diff --git a/arch/arm/mach-kirkwood/include/mach/memory.h b/arch/arm/mach-kirkwood/include/mach/memory.h deleted file mode 100644 index 4600b44e3ad..00000000000 --- a/arch/arm/mach-kirkwood/include/mach/memory.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c index 00cca22eca6..9a1e917352f 100644 --- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c +++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c @@ -163,7 +163,7 @@ subsys_initcall(mv88f6281gtw_ge_pci_init); MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = mv88f6281gtw_ge_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c index 7cdab577645..8849bcc7328 100644 --- a/arch/arm/mach-kirkwood/netspace_v2-setup.c +++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c @@ -258,7 +258,7 @@ static void __init netspace_v2_init(void) #ifdef CONFIG_MACH_NETSPACE_V2 MACHINE_START(NETSPACE_V2, "LaCie Network Space v2") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, @@ -269,7 +269,7 @@ MACHINE_END #ifdef CONFIG_MACH_INETSPACE_V2 MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, @@ -280,7 +280,7 @@ MACHINE_END #ifdef CONFIG_MACH_NETSPACE_MAX_V2 MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c index 6be627deb0f..1ba12c4dff8 100644 --- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c +++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c @@ -399,7 +399,7 @@ static void __init netxbig_v2_init(void) #ifdef CONFIG_MACH_NET2BIG_V2 MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = netxbig_v2_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, @@ -410,7 +410,7 @@ MACHINE_END #ifdef CONFIG_MACH_NET5BIG_V2 MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = netxbig_v2_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index f69beeff445..5660ca6c3d8 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -214,7 +214,7 @@ subsys_initcall(openrd_pci_init); #ifdef CONFIG_MACH_OPENRD_BASE MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board") /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = openrd_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, @@ -226,7 +226,7 @@ MACHINE_END #ifdef CONFIG_MACH_OPENRD_CLIENT MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board") /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = openrd_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, @@ -238,7 +238,7 @@ MACHINE_END #ifdef CONFIG_MACH_OPENRD_ULTIMATE MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board") /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = openrd_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c index 75c6601b8d8..6663869773a 100644 --- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c @@ -79,7 +79,7 @@ subsys_initcall(rd88f6192_pci_init); MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board") /* Maintainer: Saeed Bishara <saeed@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = rd88f6192_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index 0f75494d590..66b3c05e37a 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -115,7 +115,7 @@ subsys_initcall(rd88f6281_pci_init); MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board") /* Maintainer: Saeed Bishara <saeed@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = rd88f6281_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c index 17de0bf53c0..8b102d62e82 100644 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c @@ -138,7 +138,7 @@ static void __init sheevaplug_init(void) #ifdef CONFIG_MACH_SHEEVAPLUG MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board") /* Maintainer: shadi Ammouri <shadi@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = sheevaplug_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, @@ -149,7 +149,7 @@ MACHINE_END #ifdef CONFIG_MACH_ESATA_SHEEVAPLUG MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = sheevaplug_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c index e6b9b1b22a3..ea104fb5ec3 100644 --- a/arch/arm/mach-kirkwood/t5325-setup.c +++ b/arch/arm/mach-kirkwood/t5325-setup.c @@ -201,7 +201,7 @@ subsys_initcall(hp_t5325_pci_init); MACHINE_START(T5325, "HP t5325 Thin Client") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = hp_t5325_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index 68f32f2bf55..262c034836d 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -132,7 +132,7 @@ subsys_initcall(ts219_pci_init); MACHINE_START(TS219, "QNAP TS-119/TS-219") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = qnap_ts219_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index d5d00997070..b68f5b4a9ec 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -176,7 +176,7 @@ subsys_initcall(ts41x_pci_init); MACHINE_START(TS41X, "QNAP TS-41x") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = qnap_ts41x_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c index 3ca4f8e6f54..a5fcc7c7fe1 100644 --- a/arch/arm/mach-ks8695/board-acs5k.c +++ b/arch/arm/mach-ks8695/board-acs5k.c @@ -223,7 +223,7 @@ static void __init acs5k_init(void) MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board") /* Maintainer: Simtec Electronics. */ - .boot_params = KS8695_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = ks8695_map_io, .init_irq = ks8695_init_irq, .init_machine = acs5k_init, diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c index 1338cb3e982..fb91a716a7d 100644 --- a/arch/arm/mach-ks8695/board-dsm320.c +++ b/arch/arm/mach-ks8695/board-dsm320.c @@ -121,7 +121,7 @@ static void __init dsm320_init(void) MACHINE_START(DSM320, "D-Link DSM-320 Wireless Media Player") /* Maintainer: Simtec Electronics. */ - .boot_params = KS8695_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = ks8695_map_io, .init_irq = ks8695_init_irq, .init_machine = dsm320_init, diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c index e2e3cba8dcd..8f67a750b6c 100644 --- a/arch/arm/mach-ks8695/board-micrel.c +++ b/arch/arm/mach-ks8695/board-micrel.c @@ -53,7 +53,7 @@ static void __init micrel_init(void) MACHINE_START(KS8695, "KS8695 Centaur Development Board") /* Maintainer: Micrel Semiconductor Inc. */ - .boot_params = KS8695_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = ks8695_map_io, .init_irq = ks8695_init_irq, .init_machine = micrel_init, diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S index bf516adf192..a79e4898120 100644 --- a/arch/arm/mach-ks8695/include/mach/debug-macro.S +++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S @@ -14,7 +14,7 @@ #include <mach/hardware.h> #include <mach/regs-uart.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =KS8695_UART_PA @ physical base address ldr \rv, =KS8695_UART_VA @ virtual base address .endm diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S index b0a2db77d39..0b4e760159b 100644 --- a/arch/arm/mach-l7200/include/mach/debug-macro.S +++ b/arch/arm/mach-l7200/include/mach/debug-macro.S @@ -14,7 +14,7 @@ .equ io_virt, IO_BASE .equ io_phys, IO_START - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00044000 @ UART1 @ mov \rp, #0x00045000 @ UART2 add \rv, \rp, #io_virt @ virtual address diff --git a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S index 629e744aeb9..351bd6c8490 100644 --- a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S +++ b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S @@ -20,7 +20,7 @@ * Debug output is hardcoded to standard UART 5 */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldreq \rp, =0x40090000 ldrne \rv, =0xF4090000 .endm diff --git a/arch/arm/mach-lpc32xx/include/mach/memory.h b/arch/arm/mach-lpc32xx/include/mach/memory.h deleted file mode 100644 index a647dd624af..00000000000 --- a/arch/arm/mach-lpc32xx/include/mach/memory.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/include/mach/memory.h - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset of bank 0 - */ -#define PLAT_PHYS_OFFSET UL(0x80000000) - -#endif diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index 7993b096778..9b621e14d16 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -382,7 +382,7 @@ arch_initcall(lpc32xx_display_uid); MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller") /* Maintainer: Kevin Wells, NXP Semiconductors */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .map_io = lpc32xx_map_io, .init_irq = lpc32xx_init_irq, .timer = &lpc32xx_timer, diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S index 7e2ebd3efc7..b6f14d203c2 100644 --- a/arch/arm/mach-mmp/include/mach/debug-macro.S +++ b/arch/arm/mach-mmp/include/mach/debug-macro.S @@ -11,7 +11,7 @@ #include <mach/addr-map.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =APB_PHYS_BASE @ physical ldr \rv, =APB_VIRT_BASE @ virtual orr \rp, \rp, #0x00017000 diff --git a/arch/arm/mach-mmp/include/mach/memory.h b/arch/arm/mach-mmp/include/mach/memory.h deleted file mode 100644 index d68b50a2d6a..00000000000 --- a/arch/arm/mach-mmp/include/mach/memory.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/include/mach/memory.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_MEMORY_H -#define __ASM_MACH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif /* __ASM_MACH_MEMORY_H */ diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index 18a3c97bc86..16c86f8b4f3 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -93,7 +93,7 @@ static void __init halibut_map_io(void) } MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)") - .boot_params = 0x10000100, + .atag_offset = 0x100, .fixup = halibut_fixup, .map_io = halibut_map_io, .init_irq = halibut_init_irq, diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c index 7a9a03eb189..8a1672ee4e4 100644 --- a/arch/arm/mach-msm/board-mahimahi.c +++ b/arch/arm/mach-msm/board-mahimahi.c @@ -74,7 +74,7 @@ static void __init mahimahi_map_io(void) extern struct sys_timer msm_timer; MACHINE_START(MAHIMAHI, "mahimahi") - .boot_params = 0x20000100, + .atag_offset = 0x100, .fixup = mahimahi_fixup, .map_io = mahimahi_map_io, .init_irq = msm_init_irq, diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c index c03f269e2e4..a80765533f1 100644 --- a/arch/arm/mach-msm/board-msm7x27.c +++ b/arch/arm/mach-msm/board-msm7x27.c @@ -130,7 +130,7 @@ static void __init msm7x2x_map_io(void) } MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF") - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, .init_machine = msm7x2x_init, @@ -138,7 +138,7 @@ MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF") MACHINE_END MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA") - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, .init_machine = msm7x2x_init, @@ -146,7 +146,7 @@ MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA") MACHINE_END MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF") - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, .init_machine = msm7x2x_init, @@ -154,7 +154,7 @@ MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF") MACHINE_END MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA") - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, .init_machine = msm7x2x_init, diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index b7a84966b71..bb72ea0383b 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -24,6 +24,7 @@ #include <linux/smsc911x.h> #include <linux/usb/msm_hsusb.h> #include <linux/clkdev.h> +#include <linux/memblock.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -42,6 +43,21 @@ extern struct sys_timer msm_timer; +static void __init msm7x30_fixup(struct machine_desc *desc, struct tag *tag, + char **cmdline, struct meminfo *mi) +{ + for (; tag->hdr.size; tag = tag_next(tag)) + if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) { + tag->u.mem.start = 0; + tag->u.mem.size += SZ_2M; + } +} + +static void __init msm7x30_reserve(void) +{ + memblock_remove(0x0, SZ_2M); +} + static int hsusb_phy_init_seq[] = { 0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */ 0x02, 0x36, /* Disable CDR Auto Reset feature */ @@ -106,7 +122,9 @@ static void __init msm7x30_map_io(void) } MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, + .fixup = msm7x30_fixup, + .reserve = msm7x30_reserve, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, @@ -114,7 +132,9 @@ MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") MACHINE_END MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, + .fixup = msm7x30_fixup, + .reserve = msm7x30_reserve, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, @@ -122,7 +142,9 @@ MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") MACHINE_END MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID") - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, + .fixup = msm7x30_fixup, + .reserve = msm7x30_reserve, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c index 35c7ceeb3f2..b04468e7d00 100644 --- a/arch/arm/mach-msm/board-msm8960.c +++ b/arch/arm/mach-msm/board-msm8960.c @@ -20,16 +20,34 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/clkdev.h> +#include <linux/memblock.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> +#include <asm/setup.h> #include <mach/board.h> #include <mach/msm_iomap.h> #include "devices.h" +static void __init msm8960_fixup(struct machine_desc *desc, struct tag *tag, + char **cmdline, struct meminfo *mi) +{ + for (; tag->hdr.size; tag = tag_next(tag)) + if (tag->hdr.tag == ATAG_MEM && + tag->u.mem.start == 0x40200000) { + tag->u.mem.start = 0x40000000; + tag->u.mem.size += SZ_2M; + } +} + +static void __init msm8960_reserve(void) +{ + memblock_remove(0x40000000, SZ_2M); +} + static void __init msm8960_map_io(void) { msm_map_msm8960_io(); @@ -76,6 +94,8 @@ static void __init msm8960_rumi3_init(void) } MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR") + .fixup = msm8960_fixup, + .reserve = msm8960_reserve, .map_io = msm8960_map_io, .init_irq = msm8960_init_irq, .timer = &msm_timer, @@ -83,6 +103,8 @@ MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR") MACHINE_END MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3") + .fixup = msm8960_fixup, + .reserve = msm8960_reserve, .map_io = msm8960_map_io, .init_irq = msm8960_init_irq, .timer = &msm_timer, diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index d70a2f64361..106170fb184 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -20,14 +20,31 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/memblock.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> +#include <asm/setup.h> #include <mach/board.h> #include <mach/msm_iomap.h> +static void __init msm8x60_fixup(struct machine_desc *desc, struct tag *tag, + char **cmdline, struct meminfo *mi) +{ + for (; tag->hdr.size; tag = tag_next(tag)) + if (tag->hdr.tag == ATAG_MEM && + tag->u.mem.start == 0x40200000) { + tag->u.mem.start = 0x40000000; + tag->u.mem.size += SZ_2M; + } +} + +static void __init msm8x60_reserve(void) +{ + memblock_remove(0x40000000, SZ_2M); +} static void __init msm8x60_map_io(void) { @@ -54,6 +71,8 @@ static void __init msm8x60_init(void) } MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3") + .fixup = msm8x60_fixup, + .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, .init_machine = msm8x60_init, @@ -61,6 +80,8 @@ MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3") MACHINE_END MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF") + .fixup = msm8x60_fixup, + .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, .init_machine = msm8x60_init, @@ -68,6 +89,8 @@ MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF") MACHINE_END MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR") + .fixup = msm8x60_fixup, + .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, .init_machine = msm8x60_init, @@ -75,6 +98,8 @@ MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR") MACHINE_END MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA") + .fixup = msm8x60_fixup, + .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, .init_machine = msm8x60_init, diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 6a96911b0ad..51109b1f434 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -193,7 +193,7 @@ static void __init qsd8x50_init(void) } MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF") - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = qsd8x50_map_io, .init_irq = qsd8x50_init_irq, .init_machine = qsd8x50_init, @@ -201,7 +201,7 @@ MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF") MACHINE_END MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5") - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = qsd8x50_map_io, .init_irq = qsd8x50_init_irq, .init_machine = qsd8x50_init, diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c index 68f930f07d7..dc0bcb5a6b9 100644 --- a/arch/arm/mach-msm/board-sapphire.c +++ b/arch/arm/mach-msm/board-sapphire.c @@ -105,7 +105,7 @@ static void __init sapphire_map_io(void) MACHINE_START(SAPPHIRE, "sapphire") /* Maintainer: Brian Swetland <swetland@google.com> */ - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .fixup = sapphire_fixup, .map_io = sapphire_map_io, .init_irq = sapphire_init_irq, diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index 814386772c6..22d5694f5fe 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -93,7 +93,7 @@ static void __init trout_map_io(void) } MACHINE_START(TROUT, "HTC Dream") - .boot_params = 0x10000100, + .atag_offset = 0x100, .fixup = trout_fixup, .map_io = trout_map_io, .init_irq = trout_init_irq, diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S index 646b99ebc77..2dc73ccddb1 100644 --- a/arch/arm/mach-msm/include/mach/debug-macro.S +++ b/arch/arm/mach-msm/include/mach/debug-macro.S @@ -20,7 +20,7 @@ #include <mach/msm_iomap.h> #if defined(CONFIG_HAS_MSM_DEBUG_UART_PHYS) && !defined(CONFIG_MSM_DEBUG_UART_NONE) - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =MSM_DEBUG_UART_PHYS ldr \rv, =MSM_DEBUG_UART_BASE .endm @@ -37,7 +37,7 @@ beq 1001b .endm #else - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rv, #0xff000000 orr \rv, \rv, #0x00f00000 .endm diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h deleted file mode 100644 index f2f8d299ba9..00000000000 --- a/arch/arm/mach-msm/include/mach/memory.h +++ /dev/null @@ -1,35 +0,0 @@ -/* arch/arm/mach-msm/include/mach/memory.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* physical offset of RAM */ -#if defined(CONFIG_ARCH_QSD8X50) && defined(CONFIG_MSM_SOC_REV_A) -#define PLAT_PHYS_OFFSET UL(0x00000000) -#elif defined(CONFIG_ARCH_QSD8X50) -#define PLAT_PHYS_OFFSET UL(0x20000000) -#elif defined(CONFIG_ARCH_MSM7X30) -#define PLAT_PHYS_OFFSET UL(0x00200000) -#elif defined(CONFIG_ARCH_MSM8X60) -#define PLAT_PHYS_OFFSET UL(0x40200000) -#elif defined(CONFIG_ARCH_MSM8960) -#define PLAT_PHYS_OFFSET UL(0x40200000) -#else -#define PLAT_PHYS_OFFSET UL(0x10000000) -#endif - -#endif - diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c index 20f3f125ed2..0e94268d6e6 100644 --- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c +++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c @@ -145,7 +145,7 @@ subsys_initcall(wxl_pci_init); MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL") /* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = wxl_init, .map_io = mv78xx0_map_io, .init_early = mv78xx0_init_early, diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c index df5aebe5b0f..50b85ae2da5 100644 --- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c +++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c @@ -93,7 +93,7 @@ subsys_initcall(db78x00_pci_init); MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = db78x00_init, .map_io = mv78xx0_map_io, .init_early = mv78xx0_init_early, diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S index 04891428e48..a7df02b049b 100644 --- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S +++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S @@ -8,7 +8,7 @@ #include <mach/mv78xx0.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =MV78XX0_REGS_PHYS_BASE ldr \rv, =MV78XX0_REGS_VIRT_BASE orr \rp, \rp, #0x00012000 diff --git a/arch/arm/mach-mv78xx0/include/mach/memory.h b/arch/arm/mach-mv78xx0/include/mach/memory.h deleted file mode 100644 index a648c51f2e4..00000000000 --- a/arch/arm/mach-mv78xx0/include/mach/memory.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * arch/arm/mach-mv78xx0/include/mach/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c index d927f14c681..e85222e5357 100644 --- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c +++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c @@ -78,7 +78,7 @@ subsys_initcall(rd78x00_pci_init); MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = rd78x00_masa_init, .map_io = mv78xx0_map_io, .init_early = mv78xx0_init_early, diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index 68934ea8725..e01af948e04 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -293,7 +293,7 @@ static struct sys_timer mxc_timer = { MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module") /* Maintainer: Eric Bénard <eric@eukrea.com> */ - .boot_params = MX51_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c index ff096d58729..b41fc274a42 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-mx5/board-cpuimx51sd.c @@ -331,7 +331,7 @@ static struct sys_timer mxc_timer = { MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD") /* Maintainer: Eric Bénard <eric@eukrea.com> */ - .boot_params = MX51_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index 07a38154da2..a50174e69e2 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -169,7 +169,7 @@ static struct sys_timer mx51_3ds_timer = { MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX51_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 11b0ff67f89..468926a48fe 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -416,7 +416,7 @@ static struct sys_timer mx51_babbage_timer = { MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */ - .boot_params = MX51_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index 551daf85ff8..c36880da03f 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -280,7 +280,7 @@ static struct sys_timer mx51_efikamx_timer = { MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop") /* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */ - .boot_params = MX51_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c index 8a9bca22beb..ba5436a9fb1 100644 --- a/arch/arm/mach-mx5/board-mx51_efikasb.c +++ b/arch/arm/mach-mx5/board-mx51_efikasb.c @@ -266,7 +266,7 @@ static struct sys_timer mx51_efikasb_timer = { }; MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook") - .boot_params = MX51_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, diff --git a/arch/arm/mach-mxs/include/mach/debug-macro.S b/arch/arm/mach-mxs/include/mach/debug-macro.S index 79650a1ad78..714570d8366 100644 --- a/arch/arm/mach-mxs/include/mach/debug-macro.S +++ b/arch/arm/mach-mxs/include/mach/debug-macro.S @@ -30,7 +30,7 @@ #define UART_VADDR MXS_IO_ADDRESS(UART_PADDR) - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =UART_PADDR @ physical ldr \rv, =UART_VADDR @ virtual .endm diff --git a/arch/arm/mach-mxs/include/mach/memory.h b/arch/arm/mach-mxs/include/mach/memory.h deleted file mode 100644 index b5420a5c2d4..00000000000 --- a/arch/arm/mach-mxs/include/mach/memory.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_MXS_MEMORY_H__ -#define __MACH_MXS_MEMORY_H__ - -#define PHYS_OFFSET UL(0x40000000) - -#endif /* __MACH_MXS_MEMORY_H__ */ diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S index 56a91522818..247781e096e 100644 --- a/arch/arm/mach-netx/include/mach/debug-macro.S +++ b/arch/arm/mach-netx/include/mach/debug-macro.S @@ -13,7 +13,7 @@ #include "hardware.h" - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00000a00 orr \rv, \rp, #io_p2v(0x00100000) @ virtual orr \rp, \rp, #0x00100000 @ physical diff --git a/arch/arm/mach-netx/include/mach/memory.h b/arch/arm/mach-netx/include/mach/memory.h deleted file mode 100644 index 59561496c36..00000000000 --- a/arch/arm/mach-netx/include/mach/memory.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-netx/include/mach/memory.h - * - * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x80000000) - -#endif - diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c index ca8b203a3c9..90903dd44cb 100644 --- a/arch/arm/mach-netx/nxdb500.c +++ b/arch/arm/mach-netx/nxdb500.c @@ -200,7 +200,7 @@ static void __init nxdb500_init(void) } MACHINE_START(NXDB500, "Hilscher nxdb500") - .boot_params = 0x80000100, + .atag_offset = 0x100, .map_io = netx_map_io, .init_irq = netx_init_irq, .timer = &netx_timer, diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c index d775cbe0727..c63384aba50 100644 --- a/arch/arm/mach-netx/nxdkn.c +++ b/arch/arm/mach-netx/nxdkn.c @@ -93,7 +93,7 @@ static void __init nxdkn_init(void) } MACHINE_START(NXDKN, "Hilscher nxdkn") - .boot_params = 0x80000100, + .atag_offset = 0x100, .map_io = netx_map_io, .init_irq = netx_init_irq, .timer = &netx_timer, diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c index de369cd1dcb..8f548ec83ad 100644 --- a/arch/arm/mach-netx/nxeb500hmi.c +++ b/arch/arm/mach-netx/nxeb500hmi.c @@ -177,7 +177,7 @@ static void __init nxeb500hmi_init(void) } MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi") - .boot_params = 0x80000100, + .atag_offset = 0x100, .map_io = netx_map_io, .init_irq = netx_init_irq, .timer = &netx_timer, diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 139930350d9..398a75f62be 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -276,7 +276,7 @@ static void __init nhk8815_platform_init(void) MACHINE_START(NOMADIK, "NHK8815") /* Maintainer: ST MicroElectronics */ - .boot_params = 0x100, + .atag_offset = 0x100, .map_io = cpu8815_map_io, .init_irq = cpu8815_init_irq, .timer = &nomadik_timer, diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S index e7151b4b888..735417922ce 100644 --- a/arch/arm/mach-nomadik/include/mach/debug-macro.S +++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S @@ -10,7 +10,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00100000 add \rp, \rp, #0x000fb000 add \rv, \rp, #0xf0000000 @ virtual base diff --git a/arch/arm/mach-nomadik/include/mach/memory.h b/arch/arm/mach-nomadik/include/mach/memory.h deleted file mode 100644 index d3325211ba6..00000000000 --- a/arch/arm/mach-nomadik/include/mach/memory.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * mach-nomadik/include/mach/memory.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-nuc93x/include/mach/memory.h b/arch/arm/mach-nuc93x/include/mach/memory.h deleted file mode 100644 index ef9864b002a..00000000000 --- a/arch/arm/mach-nuc93x/include/mach/memory.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-nuc93x/include/mach/memory.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-nuc93x/mach-nuc932evb.c b/arch/arm/mach-nuc93x/mach-nuc932evb.c index d7025704248..1f741b1c160 100644 --- a/arch/arm/mach-nuc93x/mach-nuc932evb.c +++ b/arch/arm/mach-nuc93x/mach-nuc932evb.c @@ -35,7 +35,6 @@ static void __init nuc932evb_init(void) MACHINE_START(NUC932EVB, "NUC932EVB") /* Maintainer: Wan ZongShun */ - .boot_params = 0, .map_io = nuc932evb_map_io, .init_irq = nuc93x_init_irq, .init_machine = nuc932evb_init, diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 312ea6b0409..eb36b25450a 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -386,7 +386,7 @@ static void __init ams_delta_map_io(void) MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") /* Maintainer: Jonathan McDowell <noodles@earth.li> */ - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = ams_delta_map_io, .reserve = omap_reserve, .init_irq = ams_delta_init_irq, diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index a6b1bea5037..999789c4811 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -389,7 +389,7 @@ static void __init omap_fsample_map_io(void) MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") /* Maintainer: Brian Swetland <swetland@google.com> */ - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = omap_fsample_map_io, .reserve = omap_reserve, .init_irq = omap_fsample_init_irq, diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 04fc356c40f..23cc9e4ad50 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -94,7 +94,7 @@ static void __init omap_generic_map_io(void) MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") /* Maintainer: Tony Lindgren <tony@atomide.com> */ - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = omap_generic_map_io, .reserve = omap_reserve, .init_irq = omap_generic_init_irq, diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index cb7fb1aa3dc..6c70c28d055 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -461,7 +461,7 @@ static void __init h2_map_io(void) MACHINE_START(OMAP_H2, "TI-H2") /* Maintainer: Imre Deak <imre.deak@nokia.com> */ - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = h2_map_io, .reserve = omap_reserve, .init_irq = h2_init_irq, diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 31f34875ffa..8e2b64a4692 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -449,7 +449,7 @@ static void __init h3_map_io(void) MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") /* Maintainer: Texas Instruments, Inc. */ - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = h3_map_io, .reserve = omap_reserve, .init_irq = h3_init_irq, diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 36e06ea7ec6..e81ead1c89e 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -611,7 +611,7 @@ static void __init htcherald_init_irq(void) MACHINE_START(HERALD, "HTC Herald") /* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */ /* Maintainer: wing-linux.sourceforge.net */ - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = htcherald_map_io, .reserve = omap_reserve, .init_irq = htcherald_init_irq, diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 0b1ba462d38..8b034594fbc 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -459,7 +459,7 @@ static void __init innovator_map_io(void) MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") /* Maintainer: MontaVista Software, Inc. */ - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = innovator_map_io, .reserve = omap_reserve, .init_irq = innovator_init_irq, diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 5469ce247ff..6825635ac68 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -264,7 +264,7 @@ static void __init omap_nokia770_map_io(void) } MACHINE_START(NOKIA770, "Nokia 770") - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = omap_nokia770_map_io, .reserve = omap_reserve, .init_irq = omap_nokia770_init_irq, diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index b08a2138077..44b8e9362bf 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -583,7 +583,7 @@ static void __init osk_map_io(void) MACHINE_START(OMAP_OSK, "TI-OSK") /* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */ - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = osk_map_io, .reserve = omap_reserve, .init_irq = osk_init_irq, diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 459cb6bfed5..3d8cd90b1db 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -275,7 +275,7 @@ static void __init omap_palmte_map_io(void) } MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = omap_palmte_map_io, .reserve = omap_reserve, .init_irq = omap_palmte_init_irq, diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index b214f45f646..d0eefe81cd1 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -321,7 +321,7 @@ static void __init omap_palmtt_map_io(void) } MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = omap_palmtt_map_io, .reserve = omap_reserve, .init_irq = omap_palmtt_init_irq, diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 9b0ea48d35f..98e79bc0921 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -341,7 +341,7 @@ omap_palmz71_map_io(void) } MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = omap_palmz71_map_io, .reserve = omap_reserve, .init_irq = omap_palmz71_init_irq, diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 67acd414263..ad3a1567604 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -350,7 +350,7 @@ static void __init omap_perseus2_map_io(void) MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") /* Maintainer: Kevin Hilman <kjh@hilman.org> */ - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = omap_perseus2_map_io, .reserve = omap_reserve, .init_irq = omap_perseus2_init_irq, diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 9c3b7c52d9c..602b55c39d3 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -421,7 +421,7 @@ static void __init omap_sx1_map_io(void) } MACHINE_START(SX1, "OMAP310 based Siemens SX1") - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = omap_sx1_map_io, .reserve = omap_reserve, .init_irq = omap_sx1_init_irq, diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 036edc0ee9b..80165154617 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -301,7 +301,7 @@ static void __init voiceblue_init(void) MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") /* Maintainer: Ladislav Michl <michl@2n.cz> */ - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = voiceblue_map_io, .reserve = omap_reserve, .init_irq = voiceblue_init_irq, diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S index 62856044eb6..2b36a281dc8 100644 --- a/arch/arm/mach-omap1/include/mach/debug-macro.S +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -13,13 +13,8 @@ #include <linux/serial_reg.h> -#include <asm/memory.h> - #include <plat/serial.h> -#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET) -#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET) - .pushsection .data omap_uart_phys: .word 0x0 omap_uart_virt: .word 0x0 @@ -31,26 +26,24 @@ omap_uart_virt: .word 0x0 * the desired UART phys and virt addresses temporarily into * the omap_uart_phys and omap_uart_virt above. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp /* Use omap_uart_phys/virt if already configured */ -9: mrc p15, 0, \rp, c1, c0 - tst \rp, #1 @ MMU enabled? - ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled - ldrne \rp, =omap_uart_phys @ MMU enabled - add \rv, \rp, #4 @ omap_uart_virt - ldr \rp, [\rp, #0] - ldr \rv, [\rv, #0] +9: adr \rp, 99f @ get effective addr of 99f + ldr \rv, [\rp] @ get absolute addr of 99f + sub \rv, \rv, \rp @ offset between the two + ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys + sub \tmp, \rp, \rv @ make it effective + ldr \rp, [\tmp, #0] @ omap_uart_phys + ldr \rv, [\tmp, #4] @ omap_uart_virt cmp \rp, #0 @ is port configured? cmpne \rv, #0 - bne 99f @ already configured + bne 100f @ already configured /* Check the debug UART configuration set in uncompress.h */ - mrc p15, 0, \rp, c1, c0 - tst \rp, #1 @ MMU enabled? - ldreq \rp, =OMAP_UART_INFO @ MMU not enabled - ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled - ldr \rp, [\rp, #0] + and \rp, pc, #0xff000000 + ldr \rv, =OMAP_UART_INFO_OFS + ldr \rp, [\rp, \rv] /* Select the UART to use based on the UART1 scratchpad value */ 10: cmp \rp, #0 @ no port configured? @@ -74,17 +67,18 @@ omap_uart_virt: .word 0x0 /* Store both phys and virt address for the uart */ 98: add \rp, \rp, #0xff000000 @ phys base - mrc p15, 0, \rv, c1, c0 - tst \rv, #1 @ MMU enabled? - ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled - ldrne \rv, =omap_uart_phys @ MMU enabled - str \rp, [\rv, #0] + str \rp, [\tmp, #0] @ omap_uart_phys sub \rp, \rp, #0xff000000 @ phys base add \rp, \rp, #0xfe000000 @ virt base - add \rv, \rv, #4 @ omap_uart_lsr - str \rp, [\rv, #0] + str \rp, [\tmp, #4] @ omap_uart_virt b 9b -99: + + .align +99: .word . + .word omap_uart_phys + .ltorg + +100: .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h index e9b600c113e..c6337645ba8 100644 --- a/arch/arm/mach-omap1/include/mach/memory.h +++ b/arch/arm/mach-omap1/include/mach/memory.h @@ -2,4 +2,55 @@ * arch/arm/mach-omap1/include/mach/memory.h */ -#include <plat/memory.h> +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#define PLAT_PHYS_OFFSET UL(0x10000000) + +/* + * Bus address is physical address, except for OMAP-1510 Local Bus. + * OMAP-1510 bus address is translated into a Local Bus address if the + * OMAP bus type is lbus. We do the address translation based on the + * device overriding the defaults used in the dma-mapping API. + * Note that the is_lbus_device() test is not very efficient on 1510 + * because of the strncmp(). + */ +#ifdef CONFIG_ARCH_OMAP15XX + +/* + * OMAP-1510 Local Bus address offset + */ +#define OMAP1510_LB_OFFSET UL(0x30000000) + +#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET) +#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET) +#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0)) + +#define __arch_pfn_to_dma(dev, pfn) \ + ({ dma_addr_t __dma = __pfn_to_phys(pfn); \ + if (is_lbus_device(dev)) \ + __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \ + __dma; }) + +#define __arch_dma_to_pfn(dev, addr) \ + ({ dma_addr_t __dma = addr; \ + if (is_lbus_device(dev)) \ + __dma += PHYS_OFFSET - OMAP1510_LB_OFFSET; \ + __phys_to_pfn(__dma); \ + }) + +#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \ + lbus_to_virt(addr) : \ + __phys_to_virt(addr)); }) + +#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \ + (dma_addr_t) (is_lbus_device(dev) ? \ + virt_to_lbus(__addr) : \ + __virt_to_phys(__addr)); }) + +#endif /* CONFIG_ARCH_OMAP15XX */ + +#endif diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 870886a2959..1cfa1b6bb62 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -121,6 +121,7 @@ void __init omap1_map_common_io(void) #endif omap_sram_init(); + omap_init_consistent_dma_size(); } /* diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 2028464cf5b..195157da21e 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -256,7 +256,7 @@ static void __init omap_2430sdp_map_io(void) MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap_2430sdp_map_io, .init_early = omap_2430sdp_init_early, diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index bd600cfb7f8..2430531b223 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -729,7 +729,7 @@ static void __init omap_3430sdp_init(void) MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_3430sdp_init_early, diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index e4f37b57a0c..8b5b5aa751e 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -215,7 +215,7 @@ static void __init omap_sdp_init(void) } MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_sdp_init_early, diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index c7cef44c75d..be931105d68 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -838,7 +838,7 @@ static void __init omap_4430sdp_map_io(void) MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap_4430sdp_map_io, .init_early = omap_4430sdp_init_early, diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 933e9353cb3..db110fdb8b2 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -98,7 +98,7 @@ static void __init am3517_crane_init(void) } MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = am3517_crane_init_early, diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index f3006c30415..1325085e453 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -490,7 +490,7 @@ static void __init am3517_evm_init(void) } MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = am3517_evm_init_early, diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 70211703ff9..67800e647d7 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -350,7 +350,7 @@ static void __init omap_apollon_map_io(void) MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap_apollon_map_io, .init_early = omap_apollon_init_early, diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 3af8aab435b..38179c17550 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -634,7 +634,7 @@ static void __init cm_t3730_init(void) } MACHINE_START(CM_T35, "Compulab CM-T35") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = cm_t35_init_early, @@ -644,7 +644,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35") MACHINE_END MACHINE_START(CM_T3730, "Compulab CM-T3730") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = cm_t35_init_early, diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 05c72f4c1b5..aed9c29f9fa 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -299,7 +299,7 @@ static void __init cm_t3517_init(void) } MACHINE_START(CM_T3517, "Compulab CM-T3517") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = cm_t3517_init_early, diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index b6002ec31c6..99a42432ac9 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -667,7 +667,7 @@ static void __init devkit8000_init(void) } MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = devkit8000_init_early, diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 54db41a84a9..25642697281 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -66,7 +66,7 @@ static void __init omap_generic_map_io(void) /* XXX This machine entry name should be updated */ MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap_generic_map_io, .init_early = omap_generic_init_early, diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 45de2b319ec..a58c6ba06f7 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -382,7 +382,7 @@ static void __init omap_h4_map_io(void) MACHINE_START(OMAP_H4, "OMAP2420 H4 board") /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap_h4_map_io, .init_early = omap_h4_init_early, diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 35be778caf1..7040352b16b 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -672,7 +672,7 @@ static void __init igep_init(void) } MACHINE_START(IGEP0020, "IGEP v2 board") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = igep_init_early, @@ -682,7 +682,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board") MACHINE_END MACHINE_START(IGEP0030, "IGEP OMAP3 module") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = igep_init_early, diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 218764c9377..edf752bb24b 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -333,7 +333,7 @@ static void __init omap_ldp_init(void) } MACHINE_START(OMAP_LDP, "OMAP LDP board") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_ldp_init_early, diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index e11f0c5d608..6ce748154f2 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -695,7 +695,7 @@ static void __init n8x0_init_machine(void) } MACHINE_START(NOKIA_N800, "Nokia N800") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = n8x0_map_io, .init_early = n8x0_init_early, @@ -705,7 +705,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800") MACHINE_END MACHINE_START(NOKIA_N810, "Nokia N810") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = n8x0_map_io, .init_early = n8x0_init_early, @@ -715,7 +715,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810") MACHINE_END MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = n8x0_map_io, .init_early = n8x0_init_early, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 3ae16b4e3f5..1fde8a0474b 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -557,7 +557,7 @@ static void __init omap3_beagle_init(void) MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3_beagle_init_early, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index c452b3f3331..15c69a0c1ce 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -681,7 +681,7 @@ static void __init omap3_evm_init(void) MACHINE_START(OMAP3EVM, "OMAP3 EVM") /* Maintainer: Syed Mohammed Khasim - Texas Instruments */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3_evm_init_early, diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 703aeb5b8fd..01354a214ca 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -209,7 +209,7 @@ static void __init omap3logic_init(void) } MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") - .boot_params = 0x80000100, + .atag_offset = 0x100, .map_io = omap3_map_io, .init_early = omap3logic_init_early, .init_irq = omap3_init_irq, @@ -218,7 +218,7 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") MACHINE_END MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") - .boot_params = 0x80000100, + .atag_offset = 0x100, .map_io = omap3_map_io, .init_early = omap3logic_init_early, .init_irq = omap3_init_irq, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 080d7bd6795..ace56938dd3 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -606,7 +606,7 @@ static void __init omap3pandora_init(void) } MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3pandora_init_early, diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 8e104980ea2..ba13e1d5d0a 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -494,7 +494,7 @@ static void __init omap3_stalker_init(void) MACHINE_START(SBC3530, "OMAP3 STALKER") /* Maintainer: Jason Lam -lzg@ema-tech.com */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .map_io = omap3_map_io, .init_early = omap3_stalker_init_early, .init_irq = omap3_stalker_init_irq, diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 852ea046405..49e4bd207cb 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -404,7 +404,7 @@ static void __init omap3_touchbook_init(void) MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3_touchbook_init_early, diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 9aaa9605766..683bede73d5 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -583,7 +583,7 @@ static void __init omap4_panda_map_io(void) MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board") /* Maintainer: David Anders - Texas Instruments Inc */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap4_panda_map_io, .init_early = omap4_panda_init_early, diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index f949a9954d7..e592fb134c4 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -561,7 +561,7 @@ static void __init overo_init(void) } MACHINE_START(OVERO, "Gumstix Overo") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = overo_init_early, diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 7dfed24ee12..9a8ce239ba9 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -153,7 +153,7 @@ static void __init rm680_map_io(void) } MACHINE_START(NOKIA_RM680, "Nokia RM-680 board") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = rm680_map_io, .init_early = rm680_init_early, diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 5ea142f9bc9..a6c473bbb3d 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -156,7 +156,7 @@ static void __init rx51_reserve(void) MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") /* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = rx51_reserve, .map_io = rx51_map_io, .init_early = rx51_init_early, diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c index a85d5b0b11d..e41958acb6b 100644 --- a/arch/arm/mach-omap2/board-ti8168evm.c +++ b/arch/arm/mach-omap2/board-ti8168evm.c @@ -48,7 +48,7 @@ static void __init ti8168_evm_map_io(void) MACHINE_START(TI8168EVM, "ti8168evm") /* Maintainer: Texas Instruments */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .map_io = ti8168_evm_map_io, .init_early = ti8168_init_early, .init_irq = ti816x_init_irq, diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 8a98c3c303f..72f1db4863e 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -133,7 +133,7 @@ static void __init omap_zoom_init(void) } MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_zoom_init_early, @@ -143,7 +143,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") MACHINE_END MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_zoom_init_early, diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index ffd55b1c439..b9b84468314 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3078,6 +3078,7 @@ static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_null, .parent = &secure_32k_fck, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -3085,6 +3086,7 @@ static struct clk wdt1_fck = { .name = "wdt1_fck", .ops = &clkops_null, .parent = &secure_32k_fck, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 2af0e3f00ce..c0b6fbda340 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3376,10 +3376,18 @@ int __init omap4xxx_clk_init(void) } else if (cpu_is_omap446x()) { cpu_mask = RATE_IN_4460; cpu_clkflg = CK_446X; + } else { + return 0; } clk_init(&omap2_clk_functions); - omap2_clk_disable_clkdm_control(); + + /* + * Must stay commented until all OMAP SoC drivers are + * converted to runtime PM, or drivers may start crashing + * + * omap2_clk_disable_clkdm_control(); + */ for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks); c++) diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index ab7db083f97..8f0890685d7 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -747,6 +747,7 @@ int clkdm_wakeup(struct clockdomain *clkdm) spin_lock_irqsave(&clkdm->lock, flags); clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED; ret = arch_clkdm->clkdm_wakeup(clkdm); + ret |= pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); return ret; } @@ -818,6 +819,7 @@ void clkdm_deny_idle(struct clockdomain *clkdm) spin_lock_irqsave(&clkdm->lock, flags); clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED; arch_clkdm->clkdm_deny_idle(clkdm); + pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); } diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index 48adfe9fe4f..13f98e59cfe 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -13,15 +13,10 @@ #include <linux/serial_reg.h> -#include <asm/memory.h> - #include <plat/serial.h> #define UART_OFFSET(addr) ((addr) & 0x00ffffff) -#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET) -#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET) - .pushsection .data omap_uart_phys: .word 0 omap_uart_virt: .word 0 @@ -34,26 +29,25 @@ omap_uart_lsr: .word 0 * the desired UART phys and virt addresses temporarily into * the omap_uart_phys and omap_uart_virt above. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp /* Use omap_uart_phys/virt if already configured */ -10: mrc p15, 0, \rp, c1, c0 - tst \rp, #1 @ MMU enabled? - ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled - ldrne \rp, =omap_uart_phys @ MMU enabled - add \rv, \rp, #4 @ omap_uart_virt - ldr \rp, [\rp, #0] - ldr \rv, [\rv, #0] +10: adr \rp, 99f @ get effective addr of 99f + ldr \rv, [\rp] @ get absolute addr of 99f + sub \rv, \rv, \rp @ offset between the two + ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys + sub \tmp, \rp, \rv @ make it effective + ldr \rp, [\tmp, #0] @ omap_uart_phys + ldr \rv, [\tmp, #4] @ omap_uart_virt cmp \rp, #0 @ is port configured? cmpne \rv, #0 - bne 99f @ already configured + bne 100f @ already configured /* Check the debug UART configuration set in uncompress.h */ - mrc p15, 0, \rp, c1, c0 - tst \rp, #1 @ MMU enabled? - ldreq \rp, =OMAP_UART_INFO @ MMU not enabled - ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled - ldr \rp, [\rp, #0] + mov \rp, pc + ldr \rv, =OMAP_UART_INFO_OFS + and \rp, \rp, #0xff000000 + ldr \rp, [\rp, \rv] /* Select the UART to use based on the UART1 scratchpad value */ cmp \rp, #0 @ no port configured? @@ -106,50 +100,47 @@ omap_uart_lsr: .word 0 b 98f 83: mov \rp, #UART_OFFSET(TI816X_UART3_BASE) b 98f + 95: ldr \rp, =ZOOM_UART_BASE - mrc p15, 0, \rv, c1, c0 - tst \rv, #1 @ MMU enabled? - ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled - ldrne \rv, =omap_uart_phys @ MMU enabled - str \rp, [\rv, #0] + str \rp, [\tmp, #0] @ omap_uart_phys ldr \rp, =ZOOM_UART_VIRT - add \rv, \rv, #4 @ omap_uart_virt - str \rp, [\rv, #0] + str \rp, [\tmp, #4] @ omap_uart_virt mov \rp, #(UART_LSR << ZOOM_PORT_SHIFT) - add \rv, \rv, #4 @ omap_uart_lsr - str \rp, [\rv, #0] + str \rp, [\tmp, #8] @ omap_uart_lsr b 10b /* Store both phys and virt address for the uart */ 98: add \rp, \rp, #0x48000000 @ phys base - mrc p15, 0, \rv, c1, c0 - tst \rv, #1 @ MMU enabled? - ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled - ldrne \rv, =omap_uart_phys @ MMU enabled - str \rp, [\rv, #0] + str \rp, [\tmp, #0] @ omap_uart_phys sub \rp, \rp, #0x48000000 @ phys base add \rp, \rp, #0xfa000000 @ virt base - add \rv, \rv, #4 @ omap_uart_virt - str \rp, [\rv, #0] + str \rp, [\tmp, #4] @ omap_uart_virt mov \rp, #(UART_LSR << OMAP_PORT_SHIFT) - add \rv, \rv, #4 @ omap_uart_lsr - str \rp, [\rv, #0] + str \rp, [\tmp, #8] @ omap_uart_lsr b 10b -99: + + .align +99: .word . + .word omap_uart_phys + .ltorg + +100: /* Pass the UART_LSR reg address */ + ldr \tmp, [\tmp, #8] @ omap_uart_lsr + add \rp, \rp, \tmp + add \rv, \rv, \tmp .endm .macro senduart,rd,rx - strb \rd, [\rx] + orr \rd, \rd, \rx, lsl #24 @ preserve LSR reg offset + bic \rx, \rx, #0xff @ get base (THR) reg address + strb \rd, [\rx] @ send lower byte of rd + orr \rx, \rx, \rd, lsr #24 @ restore original rx (LSR) + bic \rd, \rd, #(0xff << 24) @ restore original rd .endm .macro busyuart,rd,rx -1001: mrc p15, 0, \rd, c1, c0 - tst \rd, #1 @ MMU enabled? - ldreq \rd, =omap_uart_v2p(omap_uart_lsr) @ MMU disabled - ldrne \rd, =omap_uart_lsr @ MMU enabled - ldr \rd, [\rd, #0] - ldrb \rd, [\rx, \rd] +1001: ldrb \rd, [\rx] @ rx contains UART_LSR address and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE) teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE) bne 1001b diff --git a/arch/arm/mach-omap2/include/mach/memory.h b/arch/arm/mach-omap2/include/mach/memory.h deleted file mode 100644 index ca6d32a917d..00000000000 --- a/arch/arm/mach-omap2/include/mach/memory.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/memory.h - */ - -#include <plat/memory.h> diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 2ce1ce6fb4d..d6d01cb7f28 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -16,7 +16,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -250,6 +249,7 @@ static void __init _omap2_map_common_io(void) omap2_check_revision(); omap_sram_init(); + omap_init_consistent_dma_size(); } #ifdef CONFIG_SOC_OMAP2420 diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 16743c7d6e8..408193d8e04 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -192,6 +192,7 @@ static struct omap_hwmod_addr_space omap2430_usbhsotg_addrs[] = { .pa_end = OMAP243X_HS_BASE + SZ_4K - 1, .flags = ADDR_TYPE_RT }, + { } }; /* l4_core ->usbhsotg interface */ diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 3feb35911a3..472bf22d5e8 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -130,7 +130,6 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) } else { hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]); clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); - pwrdm_wait_transition(pwrdm); sleep_switch = FORCEWAKEUP_SWITCH; } } @@ -156,7 +155,6 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) return ret; } - pwrdm_wait_transition(pwrdm); pwrdm_state_switch(pwrdm); err: return ret; diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 9af08473bf1..ef71fdd40fc 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -195,28 +195,35 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused) /** * pwrdm_init - set up the powerdomain layer - * @pwrdm_list: array of struct powerdomain pointers to register + * @pwrdms: array of struct powerdomain pointers to register * @custom_funcs: func pointers for arch specific implementations * - * Loop through the array of powerdomains @pwrdm_list, registering all - * that are available on the current CPU. If pwrdm_list is supplied - * and not null, all of the referenced powerdomains will be - * registered. No return value. XXX pwrdm_list is not really a - * "list"; it is an array. Rename appropriately. + * Loop through the array of powerdomains @pwrdms, registering all + * that are available on the current CPU. Also, program all + * powerdomain target state as ON; this is to prevent domains from + * hitting low power states (if bootloader has target states set to + * something other than ON) and potentially even losing context while + * PM is not fully initialized. The PM late init code can then program + * the desired target state for all the power domains. No return + * value. */ -void pwrdm_init(struct powerdomain **pwrdm_list, struct pwrdm_ops *custom_funcs) +void pwrdm_init(struct powerdomain **pwrdms, struct pwrdm_ops *custom_funcs) { struct powerdomain **p = NULL; + struct powerdomain *temp_p; if (!custom_funcs) WARN(1, "powerdomain: No custom pwrdm functions registered\n"); else arch_pwrdm = custom_funcs; - if (pwrdm_list) { - for (p = pwrdm_list; *p; p++) + if (pwrdms) { + for (p = pwrdms; *p; p++) _pwrdm_register(*p); } + + list_for_each_entry(temp_p, &pwrdm_list, node) + pwrdm_set_next_pwrst(temp_p, PWRDM_POWER_ON); } /** diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c index 19cf5bf99f1..8c8300951f4 100644 --- a/arch/arm/mach-orion5x/d2net-setup.c +++ b/arch/arm/mach-orion5x/d2net-setup.c @@ -336,7 +336,7 @@ static void __init d2net_init(void) #ifdef CONFIG_MACH_D2NET MACHINE_START(D2NET, "LaCie d2 Network") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = d2net_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, @@ -348,7 +348,7 @@ MACHINE_END #ifdef CONFIG_MACH_BIGDISK MACHINE_START(BIGDISK, "LaCie Big Disk Network") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = d2net_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index a3e3e9e5e32..88432aba972 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -359,7 +359,7 @@ static void __init db88f5281_init(void) MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board") /* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = db88f5281_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index c105556a0ee..9e5c1663fc4 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -730,7 +730,7 @@ static void __init dns323_init(void) /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ MACHINE_START(DNS323, "D-Link DNS-323") /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = dns323_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c index b67cff0d4cf..70a4e9265f0 100644 --- a/arch/arm/mach-orion5x/edmini_v2-setup.c +++ b/arch/arm/mach-orion5x/edmini_v2-setup.c @@ -251,7 +251,7 @@ static void __init edmini_v2_init(void) /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2") /* Maintainer: Christopher Moore <moore@free.fr> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = edmini_v2_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S index 5e3bf5b68ae..f340ed8f8dd 100644 --- a/arch/arm/mach-orion5x/include/mach/debug-macro.S +++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S @@ -10,7 +10,7 @@ #include <mach/orion5x.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =ORION5X_REGS_PHYS_BASE ldr \rv, =ORION5X_REGS_VIRT_BASE orr \rp, \rp, #0x00012000 diff --git a/arch/arm/mach-orion5x/include/mach/memory.h b/arch/arm/mach-orion5x/include/mach/memory.h deleted file mode 100644 index 6769917882f..00000000000 --- a/arch/arm/mach-orion5x/include/mach/memory.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * arch/arm/mach-orion5x/include/mach/memory.h - * - * Marvell Orion memory definitions - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index 00381249d76..9115511dc03 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -380,7 +380,7 @@ static void __init kurobox_pro_init(void) #ifdef CONFIG_MACH_KUROBOX_PRO MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = kurobox_pro_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, @@ -393,7 +393,7 @@ MACHINE_END #ifdef CONFIG_MACH_LINKSTATION_PRO MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live") /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = kurobox_pro_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c index 5065803ca82..9503fff404e 100644 --- a/arch/arm/mach-orion5x/ls-chl-setup.c +++ b/arch/arm/mach-orion5x/ls-chl-setup.c @@ -318,7 +318,7 @@ static void __init lschl_init(void) MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)") /* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = lschl_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c index 8503d0a42d4..ed6d772f4a2 100644 --- a/arch/arm/mach-orion5x/ls_hgl-setup.c +++ b/arch/arm/mach-orion5x/ls_hgl-setup.c @@ -265,7 +265,7 @@ static void __init ls_hgl_init(void) MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL") /* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = ls_hgl_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c index 9c82723c05c..743f7f1db18 100644 --- a/arch/arm/mach-orion5x/lsmini-setup.c +++ b/arch/arm/mach-orion5x/lsmini-setup.c @@ -267,7 +267,7 @@ static void __init lsmini_init(void) #ifdef CONFIG_MACH_LINKSTATION_MINI MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini") /* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = lsmini_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c index ef3bb8e9a4c..6020e26b1c7 100644 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ b/arch/arm/mach-orion5x/mss2-setup.c @@ -261,7 +261,7 @@ static void __init mss2_init(void) MACHINE_START(MSS2, "Maxtor Shared Storage II") /* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = mss2_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c index 63ff10c3c46..b3356ada64b 100644 --- a/arch/arm/mach-orion5x/mv2120-setup.c +++ b/arch/arm/mach-orion5x/mv2120-setup.c @@ -229,7 +229,7 @@ static void __init mv2120_init(void) /* Warning: HP uses a wrong mach-type (=526) in their bootloader */ MACHINE_START(MV2120, "HP Media Vault mv2120") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = mv2120_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c index e43b39cc7fe..6197c79a2ec 100644 --- a/arch/arm/mach-orion5x/net2big-setup.c +++ b/arch/arm/mach-orion5x/net2big-setup.c @@ -419,7 +419,7 @@ static void __init net2big_init(void) /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ MACHINE_START(NET2BIG, "LaCie 2Big Network") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = net2big_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c index 291d22bf44c..8c876664f49 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -169,7 +169,7 @@ subsys_initcall(rd88f5181l_fxo_pci_init); MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design") /* Maintainer: Nicolas Pitre <nico@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = rd88f5181l_fxo_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c index 3f02362e163..994644f59d8 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -181,7 +181,7 @@ subsys_initcall(rd88f5181l_ge_pci_init); MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = rd88f5181l_ge_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index 27fd38e658b..1903d25ecae 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -306,7 +306,7 @@ static void __init rd88f5182_init(void) MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design") /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = rd88f5182_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c index ad2eba9286a..e06fdae77f0 100644 --- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c @@ -122,7 +122,7 @@ subsys_initcall(rd88f6183ap_ge_pci_init); MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = rd88f6183ap_ge_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c index a34e4fac72b..306183273eb 100644 --- a/arch/arm/mach-orion5x/terastation_pro2-setup.c +++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c @@ -358,7 +358,7 @@ static void __init tsp2_init(void) MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live") /* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = tsp2_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index c9831614e35..3dbcd5ed77e 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -323,7 +323,7 @@ static void __init qnap_ts209_init(void) MACHINE_START(TS209, "QNAP TS-109/TS-209") /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = qnap_ts209_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index cc33b2222ba..23c9e2e5e55 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -312,7 +312,7 @@ static void __init qnap_ts409_init(void) MACHINE_START(TS409, "QNAP TS-409") /* Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = qnap_ts409_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index 6b7b54116f3..6c75cd35c4c 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -621,7 +621,7 @@ static void __init ts78xx_init(void) MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC") /* Maintainer: Alexander Clouter <alex@digriz.org.uk> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = ts78xx_init, .map_io = ts78xx_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index 2653595f901..1c63a76f3ca 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -173,7 +173,7 @@ subsys_initcall(wnr854t_pci_init); MACHINE_START(WNR854T, "Netgear WNR854T") /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = wnr854t_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index 251ef1543e5..4fd9f18c9d5 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -261,7 +261,7 @@ subsys_initcall(wrt350n_v2_pci_init); MACHINE_START(WRT350N_V2, "Linksys WRT350N v2") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = wrt350n_v2_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c index 63399755f19..cdb95e726f5 100644 --- a/arch/arm/mach-pnx4008/core.c +++ b/arch/arm/mach-pnx4008/core.c @@ -264,7 +264,7 @@ extern struct sys_timer pnx4008_timer; MACHINE_START(PNX4008, "Philips PNX4008") /* Maintainer: MontaVista Software Inc. */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .map_io = pnx4008_map_io, .init_irq = pnx4008_init_irq, .init_machine = pnx4008_init, diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S index 931afebaf06..469d60d97f5 100644 --- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S +++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00090000 add \rv, \rp, #0xf4000000 @ virtual add \rp, \rp, #0x40000000 @ physical diff --git a/arch/arm/mach-pnx4008/include/mach/memory.h b/arch/arm/mach-pnx4008/include/mach/memory.h deleted file mode 100644 index 1275db61cee..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/memory.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/memory.h - * - * Copyright (c) 2005 Philips Semiconductors - * Copyright (c) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x80000000) - -#endif diff --git a/arch/arm/mach-prima2/clock.c b/arch/arm/mach-prima2/clock.c index f9a2aaf63f7..615a4e75cea 100644 --- a/arch/arm/mach-prima2/clock.c +++ b/arch/arm/mach-prima2/clock.c @@ -481,6 +481,7 @@ static void __init sirfsoc_clk_init(void) static struct of_device_id clkc_ids[] = { { .compatible = "sirf,prima2-clkc" }, + {}, }; void __init sirfsoc_of_clk_init(void) diff --git a/arch/arm/mach-prima2/include/mach/debug-macro.S b/arch/arm/mach-prima2/include/mach/debug-macro.S index bf75106333f..cd97492bb07 100644 --- a/arch/arm/mach-prima2/include/mach/debug-macro.S +++ b/arch/arm/mach-prima2/include/mach/debug-macro.S @@ -9,7 +9,7 @@ #include <mach/hardware.h> #include <mach/uart.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =SIRFSOC_UART1_PA_BASE @ physical ldr \rv, =SIRFSOC_UART1_VA_BASE @ virtual .endm diff --git a/arch/arm/mach-prima2/include/mach/memory.h b/arch/arm/mach-prima2/include/mach/memory.h deleted file mode 100644 index 368cd5a0601..00000000000 --- a/arch/arm/mach-prima2/include/mach/memory.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-prima2/include/mach/memory.h - * - * Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -/* - * Restrict DMA-able region to workaround silicon limitation. - * The limitation restricts buffers available for DMA to SD/MMC - * hardware to be below 256MB - */ -#define ARM_DMA_ZONE_SIZE (SZ_256M) - -#endif diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c index c3404cbb6ff..7af254d046b 100644 --- a/arch/arm/mach-prima2/irq.c +++ b/arch/arm/mach-prima2/irq.c @@ -51,6 +51,7 @@ static __init void sirfsoc_irq_init(void) static struct of_device_id intc_ids[] = { { .compatible = "sirf,prima2-intc" }, + {}, }; void __init sirfsoc_of_irq_init(void) diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c index 9cda2057bcf..66c6387e5a0 100644 --- a/arch/arm/mach-prima2/l2x0.c +++ b/arch/arm/mach-prima2/l2x0.c @@ -13,7 +13,6 @@ #include <linux/of.h> #include <linux/of_address.h> #include <asm/hardware/cache-l2x0.h> -#include <mach/memory.h> #define L2X0_ADDR_FILTERING_START 0xC00 #define L2X0_ADDR_FILTERING_END 0xC04 @@ -41,9 +40,9 @@ static int __init sirfsoc_of_l2x_init(void) /* * set the physical memory windows L2 cache will cover */ - writel_relaxed(PLAT_PHYS_OFFSET + 1024 * 1024 * 1024, + writel_relaxed(PHYS_OFFSET + 1024 * 1024 * 1024, sirfsoc_l2x_base + L2X0_ADDR_FILTERING_END); - writel_relaxed(PLAT_PHYS_OFFSET | 0x1, + writel_relaxed(PHYS_OFFSET | 0x1, sirfsoc_l2x_base + L2X0_ADDR_FILTERING_START); writel_relaxed(0, diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c index f57124bdd14..ee33c3d458f 100644 --- a/arch/arm/mach-prima2/prima2.c +++ b/arch/arm/mach-prima2/prima2.c @@ -31,11 +31,12 @@ static const char *prima2cb_dt_match[] __initdata = { MACHINE_START(PRIMA2_EVB, "prima2cb") /* Maintainer: Barry Song <baohua.song@csr.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_early = sirfsoc_of_clk_init, .map_io = sirfsoc_map_lluart, .init_irq = sirfsoc_of_irq_init, .timer = &sirfsoc_timer, + .dma_zone_size = SZ_256M, .init_machine = sirfsoc_mach_init, .dt_compat = prima2cb_dt_match, MACHINE_END diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c index d074786e83d..492cfa8d261 100644 --- a/arch/arm/mach-prima2/rstc.c +++ b/arch/arm/mach-prima2/rstc.c @@ -19,6 +19,7 @@ static DEFINE_MUTEX(rstc_lock); static struct of_device_id rstc_ids[] = { { .compatible = "sirf,prima2-rstc" }, + {}, }; static int __init sirfsoc_of_rstc_init(void) diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c index 44027f34a88..ed7ec48d11d 100644 --- a/arch/arm/mach-prima2/timer.c +++ b/arch/arm/mach-prima2/timer.c @@ -190,6 +190,7 @@ static void __init sirfsoc_timer_init(void) static struct of_device_id timer_ids[] = { { .compatible = "sirf,prima2-tick" }, + {}, }; static void __init sirfsoc_of_timer_map(void) diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index ef3e8b1e06c..7765d677adb 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -828,5 +828,5 @@ MACHINE_START(BALLOON3, "Balloon3") .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = balloon3_init, - .boot_params = PLAT_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, MACHINE_END diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c index 648b0ab2bf7..4efc16d39c7 100644 --- a/arch/arm/mach-pxa/capc7117.c +++ b/arch/arm/mach-pxa/capc7117.c @@ -148,7 +148,7 @@ static void __init capc7117_init(void) MACHINE_START(CAPC7117, "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index 13cf518bbbf..349896c53ab 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -513,7 +513,7 @@ static void __init cmx2xx_map_io(void) #endif MACHINE_START(ARMCORE, "Compulab CM-X2XX") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = cmx2xx_map_io, .nr_irqs = CMX2XX_NR_IRQS, .init_irq = cmx2xx_init_irq, diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index b6a51340270..9ac0225cd51 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -852,7 +852,7 @@ static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags, } MACHINE_START(CM_X300, "CM-X300 module") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 870920934ec..7db66465716 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -306,7 +306,7 @@ static void __init colibri_pxa270_income_init(void) } MACHINE_START(COLIBRI, "Toradex Colibri PXA270") - .boot_params = COLIBRI_SDRAM_BASE + 0x100, + .atag_offset = 0x100, .init_machine = colibri_pxa270_init, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, @@ -315,7 +315,7 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270") MACHINE_END MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .init_machine = colibri_pxa270_income_init, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index 60a6781e7a8..c825e8bf2db 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -183,7 +183,7 @@ void __init colibri_pxa300_init(void) } MACHINE_START(COLIBRI300, "Toradex Colibri PXA300") - .boot_params = COLIBRI_SDRAM_BASE + 0x100, + .atag_offset = 0x100, .init_machine = colibri_pxa300_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index d2c6631915d..692e1ffc558 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -253,7 +253,7 @@ void __init colibri_pxa320_init(void) } MACHINE_START(COLIBRI320, "Toradex Colibri PXA320") - .boot_params = COLIBRI_SDRAM_BASE + 0x100, + .atag_offset = 0x100, .init_machine = colibri_pxa320_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index fe812eafb1f..5e2cf39e9e4 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -272,7 +272,7 @@ static void __init csb726_init(void) } MACHINE_START(CSB726, "Cogent CSB726") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 2e37ea52b37..94acc0b01dd 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -1299,7 +1299,7 @@ static void __init em_x270_init(void) } MACHINE_START(EM_X270, "Compulab EM-X270") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, @@ -1308,7 +1308,7 @@ MACHINE_START(EM_X270, "Compulab EM-X270") MACHINE_END MACHINE_START(EXEDA, "Compulab eXeda") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index b4599ec9d61..e823c54057f 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -189,7 +189,7 @@ static void __init e330_init(void) MACHINE_START(E330, "Toshiba e330") /* Maintainer: Ian Molton (spyro@f2s.com) */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, @@ -239,7 +239,7 @@ static void __init e350_init(void) MACHINE_START(E350, "Toshiba e350") /* Maintainer: Ian Molton (spyro@f2s.com) */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, @@ -362,7 +362,7 @@ static void __init e400_init(void) MACHINE_START(E400, "Toshiba e400") /* Maintainer: Ian Molton (spyro@f2s.com) */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, @@ -551,7 +551,7 @@ static void __init e740_init(void) MACHINE_START(E740, "Toshiba e740") /* Maintainer: Ian Molton (spyro@f2s.com) */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, @@ -743,7 +743,7 @@ static void __init e750_init(void) MACHINE_START(E750, "Toshiba e750") /* Maintainer: Ian Molton (spyro@f2s.com) */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, @@ -948,7 +948,7 @@ static void __init e800_init(void) MACHINE_START(E800, "Toshiba e800") /* Maintainer: Ian Molton (spyro@f2s.com) */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index b73eadb9f5d..8308eee5a92 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -797,7 +797,7 @@ static void __init a780_init(void) } MACHINE_START(EZX_A780, "Motorola EZX A780") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, @@ -863,7 +863,7 @@ static void __init e680_init(void) } MACHINE_START(EZX_E680, "Motorola EZX E680") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, @@ -929,7 +929,7 @@ static void __init a1200_init(void) } MACHINE_START(EZX_A1200, "Motorola EZX A1200") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, @@ -1120,7 +1120,7 @@ static void __init a910_init(void) } MACHINE_START(EZX_A910, "Motorola EZX A910") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, @@ -1186,7 +1186,7 @@ static void __init e6_init(void) } MACHINE_START(EZX_E6, "Motorola EZX E6") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, @@ -1226,7 +1226,7 @@ static void __init e2_init(void) } MACHINE_START(EZX_E2, "Motorola EZX E2") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index deaa111c91f..9c8208ca041 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -233,7 +233,7 @@ static void __init gumstix_init(void) } MACHINE_START(GUMSTIX, "Gumstix") - .boot_params = 0xa0000100, /* match u-boot bi_boot_params */ + .atag_offset = 0x100, /* match u-boot bi_boot_params */ .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c index 0a235128914..4b5e110640b 100644 --- a/arch/arm/mach-pxa/h5000.c +++ b/arch/arm/mach-pxa/h5000.c @@ -203,7 +203,7 @@ static void __init h5000_init(void) } MACHINE_START(H5400, "HP iPAQ H5000") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c index a997d0ab287..f2c32457084 100644 --- a/arch/arm/mach-pxa/himalaya.c +++ b/arch/arm/mach-pxa/himalaya.c @@ -158,7 +158,7 @@ static void __init himalaya_init(void) MACHINE_START(HIMALAYA, "HTC Himalaya") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index c748a473a2f..6f6368ece9b 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -838,7 +838,7 @@ static void __init hx4700_init(void) } MACHINE_START(H4700, "HP iPAQ HX4700") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .nr_irqs = HX4700_NR_IRQS, .init_irq = pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index d427429f1f3..f78d5db758d 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -191,7 +191,7 @@ static void __init icontrol_init(void) } MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S index 7d5c75125d6..70b112e8ef6 100644 --- a/arch/arm/mach-pxa/include/mach/debug-macro.S +++ b/arch/arm/mach-pxa/include/mach/debug-macro.S @@ -13,7 +13,7 @@ #include "hardware.h" - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00100000 orr \rv, \rp, #io_p2v(0x40000000) @ virtual orr \rp, \rp, #0x40000000 @ physical diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h deleted file mode 100644 index d05a59727d6..00000000000 --- a/arch/arm/mach-pxa/include/mach/memory.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-pxa/include/mach/memory.h - * - * Author: Nicolas Pitre - * Copyright: (C) 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0xa0000000) - -#endif diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 8f97e15e86e..0037e57e0ce 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -437,7 +437,7 @@ static void __init littleton_init(void) } MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa3xx_map_io, .nr_irqs = LITTLETON_NR_IRQS, .init_irq = pxa3xx_init_irq, diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index c171d6ebee4..16df0fc0879 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -499,7 +499,7 @@ static void __init lpd270_map_io(void) MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine") /* Maintainer: Peter Barada */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = lpd270_map_io, .nr_irqs = LPD270_NR_IRQS, .init_irq = lpd270_init_irq, diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 5fe5bcd7c0a..4b796c37af3 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -753,7 +753,7 @@ static void __init magician_init(void) MACHINE_START(MAGICIAN, "HTC Magician") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .nr_irqs = MAGICIAN_NR_IRQS, .init_irq = pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 4622eb78ef2..cc6e14f6d11 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -616,7 +616,7 @@ static void __init mainstone_map_io(void) MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") /* Maintainer: MontaVista Software Inc. */ - .boot_params = 0xa0000100, /* BLOB boot parameter setting */ + .atag_offset = 0x100, /* BLOB boot parameter setting */ .map_io = mainstone_map_io, .nr_irqs = MAINSTONE_NR_IRQS, .init_irq = mainstone_init_irq, diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 64810f908e5..b938fc2c316 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -751,7 +751,7 @@ static void mioa701_machine_exit(void) } MACHINE_START(MIOA701, "MIO A701") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = &pxa27x_map_io, .init_irq = &pxa27x_init_irq, .handle_irq = &pxa27x_handle_irq, diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c index fb408861dbc..4af5d513c38 100644 --- a/arch/arm/mach-pxa/mp900.c +++ b/arch/arm/mach-pxa/mp900.c @@ -92,7 +92,7 @@ static void __init mp900c_init(void) /* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */ MACHINE_START(NEC_MP900, "MobilePro900/C") - .boot_params = 0xa0220100, + .atag_offset = 0x220100, .timer = &pxa_timer, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 6b77365ed93..3d4a2819cae 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -342,7 +342,7 @@ static void __init palmld_init(void) } MACHINE_START(PALMLD, "Palm LifeDrive") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = palmld_map_io, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 9bd3e47486f..99d6bcf1f97 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -202,7 +202,7 @@ static void __init palmt5_init(void) } MACHINE_START(PALMT5, "Palm Tungsten|T5") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .reserve = palmt5_reserve, .init_irq = pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 6ad4a6c7bc9..6ec7caefb37 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -537,7 +537,7 @@ static void __init palmtc_init(void) }; MACHINE_START(PALMTC, "Palm Tungsten|C") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 664232f3e62..9376da06404 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -356,7 +356,7 @@ static void __init palmte2_init(void) } MACHINE_START(PALMTE2, "Palm Tungsten|E2") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index bb27d4b688d..7346fbfa810 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -440,7 +440,7 @@ static void __init centro_init(void) } MACHINE_START(TREO680, "Palm Treo 680") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .reserve = treo_reserve, .init_irq = pxa27x_init_irq, @@ -450,7 +450,7 @@ MACHINE_START(TREO680, "Palm Treo 680") MACHINE_END MACHINE_START(CENTRO, "Palm Centro 685") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .reserve = treo_reserve, .init_irq = pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index fc4285589c1..2b9e76fc2c9 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -364,7 +364,7 @@ static void __init palmtx_init(void) } MACHINE_START(PALMTX, "Palm T|X") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = palmtx_map_io, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index e61c1cc0551..68e18baf8e0 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -399,7 +399,7 @@ static void __init palmz72_init(void) } MACHINE_START(PALMZ72, "Palm Zire72") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c index ffa65dfb8c6..0b825a35353 100644 --- a/arch/arm/mach-pxa/pcm027.c +++ b/arch/arm/mach-pxa/pcm027.c @@ -258,7 +258,7 @@ static void __init pcm027_map_io(void) MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270") /* Maintainer: Pengutronix */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pcm027_map_io, .nr_irqs = PCM027_NR_IRQS, .init_irq = pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index bbcd90562eb..6810cddec92 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -1086,7 +1086,7 @@ static void __init raumfeld_speaker_init(void) #ifdef CONFIG_MACH_RAUMFELD_RC MACHINE_START(RAUMFELD_RC, "Raumfeld Controller") - .boot_params = RAUMFELD_SDRAM_BASE + 0x100, + .atag_offset = 0x100, .init_machine = raumfeld_controller_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, @@ -1097,7 +1097,7 @@ MACHINE_END #ifdef CONFIG_MACH_RAUMFELD_CONNECTOR MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector") - .boot_params = RAUMFELD_SDRAM_BASE + 0x100, + .atag_offset = 0x100, .init_machine = raumfeld_connector_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, @@ -1108,7 +1108,7 @@ MACHINE_END #ifdef CONFIG_MACH_RAUMFELD_SPEAKER MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker") - .boot_params = RAUMFELD_SDRAM_BASE + 0x100, + .atag_offset = 0x100, .init_machine = raumfeld_speaker_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index df4356e8aca..602d70b50f8 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -596,7 +596,7 @@ static void __init saar_init(void) MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)") /* Maintainer: Eric Miao <eric.miao@marvell.com> */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index ebd6379c496..5ce340320ab 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c @@ -103,7 +103,7 @@ static void __init saarb_init(void) } MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa3xx_map_io, .nr_irqs = SAARB_NR_IRQS, .init_irq = pxa95x_init_irq, diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 3f8d0af9e2f..4c9a48bef56 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -1004,7 +1004,7 @@ MACHINE_START(INTELMOTE2, "IMOTE 2") .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = imote2_init, - .boot_params = 0xA0000100, + .atag_offset = 0x100, MACHINE_END #endif @@ -1016,6 +1016,6 @@ MACHINE_START(STARGATE2, "Stargate 2") .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = stargate2_init, - .boot_params = 0xA0000100, + .atag_offset = 0x100, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index 32fb58e01b1..ad47bb98f30 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -489,7 +489,7 @@ static void __init tavorevb_init(void) MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)") /* Maintainer: Eric Miao <eric.miao@marvell.com> */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c index fd5a8eae0a8..fd569167302 100644 --- a/arch/arm/mach-pxa/tavorevb3.c +++ b/arch/arm/mach-pxa/tavorevb3.c @@ -125,7 +125,7 @@ static void __init evb3_init(void) } MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa3xx_map_io, .nr_irqs = TAVOREVB3_NR_IRQS, .init_irq = pxa3xx_init_irq, diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index c0417508f39..35bbf13724b 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -554,7 +554,7 @@ static void __init trizeps4_map_io(void) MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module") /* MAINTAINER("Jürgen Schindele") */ - .boot_params = TRIZEPS4_SDRAM_BASE + 0x100, + .atag_offset = 0x100, .init_machine = trizeps4_init, .map_io = trizeps4_map_io, .init_irq = pxa27x_init_irq, @@ -564,7 +564,7 @@ MACHINE_END MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module") /* MAINTAINER("Jürgen Schindele") */ - .boot_params = TRIZEPS4_SDRAM_BASE + 0x100, + .atag_offset = 0x100, .init_machine = trizeps4_init, .map_io = trizeps4_map_io, .init_irq = pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index d4a3dc74e84..242ddae332d 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -992,7 +992,7 @@ static void __init viper_map_io(void) MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC") /* Maintainer: Marc Zyngier <maz@misterjones.org> */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = viper_map_io, .init_irq = viper_init_irq, .handle_irq = pxa25x_handle_irq, diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index 5f8490ab07c..a7539a6ed1f 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -716,7 +716,7 @@ static void __init vpac270_init(void) } MACHINE_START(VPAC270, "Voipac PXA270") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index acc600f5e72..54930cccbe5 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -180,7 +180,7 @@ static void __init xcep_init(void) } MACHINE_START(XCEP, "Iskratel XCEP") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .init_machine = xcep_init, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index 6c9275a20c9..84ed72de53b 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -686,7 +686,7 @@ static void z2_power_off(void) */ PSPR = 0x0; local_irq_disable(); - pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET); + pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PHYS_OFFSET - PAGE_OFFSET); } #else #define z2_power_off NULL @@ -718,7 +718,7 @@ static void __init z2_init(void) } MACHINE_START(ZIPIT2, "Zipit Z2") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 99c49bcd9f7..c424e7d85ce 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -904,7 +904,7 @@ static void __init zeus_map_io(void) MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS") /* Maintainer: Marc Zyngier <maz@misterjones.org> */ - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = zeus_map_io, .nr_irqs = ZEUS_NR_IRQS, .init_irq = zeus_init_irq, diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 15ec66b3471..31d49689189 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -422,7 +422,7 @@ static void __init zylonite_init(void) } MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = pxa3xx_map_io, .nr_irqs = ZYLONITE_NR_IRQS, .init_irq = pxa3xx_init_irq, diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S index 90b687cbe04..fb4901c4ef0 100644 --- a/arch/arm/mach-realview/include/mach/debug-macro.S +++ b/arch/arm/mach-realview/include/mach/debug-macro.S @@ -33,7 +33,7 @@ #error "Unknown RealView platform" #endif - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #DEBUG_LL_UART_OFFSET orr \rv, \rp, #0xfb000000 @ virtual base orr \rp, \rp, #0x10000000 @ physical base diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 7a4e3b18cb3..026c66ad7ec 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -463,7 +463,7 @@ static void __init realview_eb_init(void) MACHINE_START(REALVIEW_EB, "ARM-RealView EB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = PLAT_PHYS_OFFSET + 0x00000100, + .atag_offset = 0x100, .fixup = realview_fixup, .map_io = realview_eb_map_io, .init_early = realview_init_early, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index ad5671acb66..7263dea7777 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -358,7 +358,7 @@ static void __init realview_pb1176_init(void) MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = PLAT_PHYS_OFFSET + 0x00000100, + .atag_offset = 0x100, .fixup = realview_pb1176_fixup, .map_io = realview_pb1176_map_io, .init_early = realview_init_early, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index b43644b3685..671ad6d6ff0 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -360,7 +360,7 @@ static void __init realview_pb11mp_init(void) MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = PLAT_PHYS_OFFSET + 0x00000100, + .atag_offset = 0x100, .fixup = realview_fixup, .map_io = realview_pb11mp_map_io, .init_early = realview_init_early, diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 763e8f38c15..cbf22df4ad5 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -310,7 +310,7 @@ static void __init realview_pba8_init(void) MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = PLAT_PHYS_OFFSET + 0x00000100, + .atag_offset = 0x100, .fixup = realview_fixup, .map_io = realview_pba8_map_io, .init_early = realview_init_early, diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 363b0ab5615..8ec7e52618b 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -393,7 +393,7 @@ static void __init realview_pbx_init(void) MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = PLAT_PHYS_OFFSET + 0x00000100, + .atag_offset = 0x100, .fixup = realview_pbx_fixup, .map_io = realview_pbx_map_io, .init_early = realview_init_early, diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S index 85effffdc2b..6d28cc99b12 100644 --- a/arch/arm/mach-rpc/include/mach/debug-macro.S +++ b/arch/arm/mach-rpc/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00010000 orr \rp, \rp, #0x00000fe0 orr \rv, \rp, #0xe0000000 @ virtual diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c index 580b3c73d2c..a9241eb8772 100644 --- a/arch/arm/mach-rpc/riscpc.c +++ b/arch/arm/mach-rpc/riscpc.c @@ -218,7 +218,7 @@ extern struct sys_timer ioc_timer; MACHINE_START(RISCPC, "Acorn-RiscPC") /* Maintainer: Russell King */ - .boot_params = 0x10000100, + .atag_offset = 0x100, .reserve_lp0 = 1, .reserve_lp1 = 1, .map_io = rpc_map_io, diff --git a/arch/arm/mach-s3c2400/include/mach/memory.h b/arch/arm/mach-s3c2400/include/mach/memory.h deleted file mode 100644 index 3f33670dd01..00000000000 --- a/arch/arm/mach-s3c2400/include/mach/memory.h +++ /dev/null @@ -1,20 +0,0 @@ -/* arch/arm/mach-s3c2400/include/mach/memory.h - * from arch/arm/mach-rpc/include/mach/memory.h - * - * Copyright 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * Copyright (C) 1996,1997,1998 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x0C000000) - -#endif diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S index 5882deaa56b..4135de87d1f 100644 --- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S @@ -19,7 +19,7 @@ #define S3C2410_UART1_OFF (0x4000) #define SHIFT_2440TXF (14-9) - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, = S3C24XX_PA_UART ldr \rv, = S3C24XX_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 diff --git a/arch/arm/mach-s3c2410/include/mach/memory.h b/arch/arm/mach-s3c2410/include/mach/memory.h deleted file mode 100644 index f92b97b89c0..00000000000 --- a/arch/arm/mach-s3c2410/include/mach/memory.h +++ /dev/null @@ -1,16 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/memory.h - * from arch/arm/mach-rpc/include/mach/memory.h - * - * Copyright (C) 1996,1997,1998 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x30000000) - -#endif diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index dabc141243f..79838942b0a 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -236,7 +236,7 @@ static void __init amlm5900_init(void) } MACHINE_START(AML_M5900, "AML_M5900") - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = amlm5900_map_io, .init_irq = s3c24xx_init_irq, .init_machine = amlm5900_init, diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 1e2d536adda..a20ae1ad406 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -657,7 +657,7 @@ static void __init bast_init(void) MACHINE_START(BAST, "Simtec-BAST") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = bast_map_io, .init_irq = s3c24xx_init_irq, .init_machine = bast_init, diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 2a2fa062013..556c535829f 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -744,7 +744,7 @@ static void __init h1940_init(void) MACHINE_START(H1940, "IPAQ-H1940") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = h1940_map_io, .reserve = h1940_reserve, .init_irq = h1940_init_irq, diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 079dcaa602d..1dc3e323441 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -586,7 +586,7 @@ MACHINE_START(N30, "Acer-N30") /* Maintainer: Christer Weinigel <christer@weinigel.se>, Ben Dooks <ben-linux@fluff.org> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .timer = &s3c24xx_timer, .init_machine = n30_init, .init_irq = s3c24xx_init_irq, @@ -596,7 +596,7 @@ MACHINE_END MACHINE_START(N35, "Acer-N35") /* Maintainer: Christer Weinigel <christer@weinigel.se> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .timer = &s3c24xx_timer, .init_machine = n30_init, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c index 0aa16cd5acb..f03f3fd9cec 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c2410/mach-otom.c @@ -116,7 +116,7 @@ static void __init otom11_init(void) MACHINE_START(OTOM, "Nex Vision - Otom 1.1") /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = otom11_map_io, .init_machine = otom11_init, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index f44f77531b1..367d376deb9 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -344,7 +344,7 @@ static void __init qt2410_machine_init(void) } MACHINE_START(QT2410, "QT2410") - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = qt2410_map_io, .init_irq = s3c24xx_init_irq, .init_machine = qt2410_machine_init, diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index e17f03387ab..99c9dfdb71c 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -111,7 +111,7 @@ static void __init smdk2410_init(void) MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch * to SMDK2410 */ /* Maintainer: Jonas Dietsche */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = smdk2410_map_io, .init_irq = s3c24xx_init_irq, .init_machine = smdk2410_init, diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c index 43c2b831b9e..e0d0b6fb280 100644 --- a/arch/arm/mach-s3c2410/mach-tct_hammer.c +++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c @@ -146,7 +146,7 @@ static void __init tct_hammer_init(void) } MACHINE_START(TCT_HAMMER, "TCT_HAMMER") - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = tct_hammer_map_io, .init_irq = s3c24xx_init_irq, .init_machine = tct_hammer_init, diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 6ccce5a761b..df47e8e9006 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -400,7 +400,7 @@ static void __init vr1000_init(void) MACHINE_START(VR1000, "Thorcom-VR1000") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = vr1000_map_io, .init_machine = vr1000_init, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 5eeb47580b0..286ef1738c6 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -655,7 +655,7 @@ static void __init jive_machine_init(void) MACHINE_START(JIVE, "JIVE") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .init_irq = s3c24xx_init_irq, .map_io = jive_map_io, diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index 834cfb61bcf..d6325ede9f2 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -128,7 +128,7 @@ static void __init smdk2413_machine_init(void) MACHINE_START(S3C2413, "S3C2413") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .fixup = smdk2413_fixup, .init_irq = s3c24xx_init_irq, @@ -139,7 +139,7 @@ MACHINE_END MACHINE_START(SMDK2412, "SMDK2412") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .fixup = smdk2413_fixup, .init_irq = s3c24xx_init_irq, @@ -150,7 +150,7 @@ MACHINE_END MACHINE_START(SMDK2413, "SMDK2413") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .fixup = smdk2413_fixup, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c index 83544ebe20a..5955c15018b 100644 --- a/arch/arm/mach-s3c2412/mach-vstms.c +++ b/arch/arm/mach-s3c2412/mach-vstms.c @@ -156,7 +156,7 @@ static void __init vstms_init(void) } MACHINE_START(VSTMS, "VSTMS") - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .fixup = vstms_fixup, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c index ac27ebb31c9..a9eee531ca7 100644 --- a/arch/arm/mach-s3c2416/mach-smdk2416.c +++ b/arch/arm/mach-s3c2416/mach-smdk2416.c @@ -245,7 +245,7 @@ static void __init smdk2416_machine_init(void) MACHINE_START(SMDK2416, "SMDK2416") /* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .init_irq = s3c24xx_init_irq, .map_io = smdk2416_map_io, diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index d7086788b1f..74f92fc3fd0 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -498,7 +498,7 @@ static void __init anubis_init(void) MACHINE_START(ANUBIS, "Simtec-Anubis") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = anubis_map_io, .init_machine = anubis_init, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c index 6c98b789b8c..38887ee0c78 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c2440/mach-at2440evb.c @@ -233,7 +233,7 @@ static void __init at2440evb_init(void) MACHINE_START(AT2440EVB, "AT2440EVB") - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = at2440evb_map_io, .init_machine = at2440evb_init, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index c10ddf4ed7f..de1e0ff46ce 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -595,7 +595,7 @@ static void __init gta02_machine_init(void) MACHINE_START(NEO1973_GTA02, "GTA02") /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = gta02_map_io, .init_irq = s3c24xx_init_irq, .init_machine = gta02_machine_init, diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index fc2dc0b3d4f..91fe0b4c95f 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -676,7 +676,7 @@ static void __init mini2440_init(void) MACHINE_START(MINI2440, "MINI2440") /* Maintainer: Michel Pollet <buserror@gmail.com> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = mini2440_map_io, .init_machine = mini2440_init, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c index 37dd306fb7d..61c0bf14816 100644 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ b/arch/arm/mach-s3c2440/mach-nexcoder.c @@ -151,7 +151,7 @@ static void __init nexcoder_init(void) MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = nexcoder_map_io, .init_machine = nexcoder_init, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index d8853639331..dc142ebf8cb 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -447,7 +447,7 @@ static void __init osiris_init(void) MACHINE_START(OSIRIS, "Simtec-OSIRIS") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = osiris_map_io, .init_irq = s3c24xx_init_irq, .init_machine = osiris_init, diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c index 27ea95096fe..684dbb3567f 100644 --- a/arch/arm/mach-s3c2440/mach-rx1950.c +++ b/arch/arm/mach-s3c2440/mach-rx1950.c @@ -825,7 +825,7 @@ static void __init rx1950_reserve(void) MACHINE_START(RX1950, "HP iPAQ RX1950") /* Maintainers: Vasily Khoruzhick */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = rx1950_map_io, .reserve = rx1950_reserve, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index 1472b1a5b2f..e19499c2f90 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -218,7 +218,7 @@ static void __init rx3715_init_machine(void) MACHINE_START(RX3715, "IPAQ-RX3715") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .map_io = rx3715_map_io, .reserve = rx3715_reserve, .init_irq = rx3715_init_irq, diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c index eedfe0f1164..36eeb4197a8 100644 --- a/arch/arm/mach-s3c2440/mach-smdk2440.c +++ b/arch/arm/mach-s3c2440/mach-smdk2440.c @@ -175,7 +175,7 @@ static void __init smdk2440_machine_init(void) MACHINE_START(S3C2440, "SMDK2440") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .init_irq = s3c24xx_init_irq, .map_io = smdk2440_map_io, diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c index 514275e43ca..bec107e0044 100644 --- a/arch/arm/mach-s3c2443/mach-smdk2443.c +++ b/arch/arm/mach-s3c2443/mach-smdk2443.c @@ -139,7 +139,7 @@ static void __init smdk2443_machine_init(void) MACHINE_START(SMDK2443, "SMDK2443") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .boot_params = S3C2410_SDRAM_PA + 0x100, + .atag_offset = 0x100, .init_irq = s3c24xx_init_irq, .map_io = smdk2443_map_io, diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c index 374e45e566b..8dc05763a7e 100644 --- a/arch/arm/mach-s3c64xx/cpu.c +++ b/arch/arm/mach-s3c64xx/cpu.c @@ -20,6 +20,7 @@ #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/map.h> @@ -145,6 +146,7 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size) /* initialise the io descriptors we need for initialisation */ iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); iotable_init(mach_desc, size); + init_consistent_dma_size(SZ_8M); idcode = __raw_readl(S3C_VA_SYS + 0x118); if (!idcode) { diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S index a29e70550c7..c0c076a90f2 100644 --- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S @@ -21,7 +21,7 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, = S3C_PA_UART ldr \rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) #if CONFIG_DEBUG_S3C_UART != 0 diff --git a/arch/arm/mach-s3c64xx/include/mach/memory.h b/arch/arm/mach-s3c64xx/include/mach/memory.h deleted file mode 100644 index 4760cdae1eb..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/memory.h +++ /dev/null @@ -1,20 +0,0 @@ -/* arch/arm/mach-s3c6400/include/mach/memory.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x50000000) - -#define CONSISTENT_DMA_SIZE SZ_8M - -#endif diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index cb8864327ac..d164a282bfb 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -233,7 +233,7 @@ static void __init anw6410_machine_init(void) MACHINE_START(ANW6410, "A&W6410") /* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */ - .boot_params = S3C64XX_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s3c6410_init_irq, .map_io = anw6410_map_io, diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index af0c2fe1ea3..4c76e08423f 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -766,7 +766,7 @@ static void __init crag6410_machine_init(void) MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410") /* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */ - .boot_params = S3C64XX_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s3c6410_init_irq, .map_io = crag6410_map_io, .init_machine = crag6410_machine_init, diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index b3d93cc8dde..19a0887e1c1 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -265,7 +265,7 @@ static void __init hmt_machine_init(void) MACHINE_START(HMT, "Airgoo-HMT") /* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */ - .boot_params = S3C64XX_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s3c6410_init_irq, .map_io = hmt_map_io, .init_machine = hmt_machine_init, diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index 527f49bd1b5..e91f63f7a49 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -349,7 +349,7 @@ static void __init mini6410_machine_init(void) MACHINE_START(MINI6410, "MINI6410") /* Maintainer: Darius Augulis <augulis.darius@gmail.com> */ - .boot_params = S3C64XX_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s3c6410_init_irq, .map_io = mini6410_map_io, .init_machine = mini6410_machine_init, diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index 01c6857c5b6..c30f2e5e0d8 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -97,7 +97,7 @@ static void __init ncp_machine_init(void) MACHINE_START(NCP, "NCP") /* Maintainer: Samsung Electronics */ - .boot_params = S3C64XX_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s3c6410_init_irq, .map_io = ncp_map_io, .init_machine = ncp_machine_init, diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index 95b04b1729e..10870cb5b39 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -329,7 +329,7 @@ static void __init real6410_machine_init(void) MACHINE_START(REAL6410, "REAL6410") /* Maintainer: Darius Augulis <augulis.darius@gmail.com> */ - .boot_params = S3C64XX_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s3c6410_init_irq, .map_io = real6410_map_io, diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c index 342e8dfddf8..cbb57ded3d9 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq5.c +++ b/arch/arm/mach-s3c64xx/mach-smartq5.c @@ -146,7 +146,7 @@ static void __init smartq5_machine_init(void) MACHINE_START(SMARTQ5, "SmartQ 5") /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */ - .boot_params = S3C64XX_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s3c6410_init_irq, .map_io = smartq_map_io, .init_machine = smartq5_machine_init, diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c index 57963977da8..04f914b85fd 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq7.c +++ b/arch/arm/mach-s3c64xx/mach-smartq7.c @@ -162,7 +162,7 @@ static void __init smartq7_machine_init(void) MACHINE_START(SMARTQ7, "SmartQ 7") /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */ - .boot_params = S3C64XX_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s3c6410_init_irq, .map_io = smartq_map_io, .init_machine = smartq7_machine_init, diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index 3cca642f1e6..6fd5e95f8f7 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -85,7 +85,7 @@ static void __init smdk6400_machine_init(void) MACHINE_START(SMDK6400, "SMDK6400") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .boot_params = S3C64XX_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s3c6400_init_irq, .map_io = smdk6400_map_io, diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index ecbea92bf83..dcf2d73b478 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -742,7 +742,7 @@ static void __init smdk6410_machine_init(void) MACHINE_START(SMDK6410, "SMDK6410") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .boot_params = S3C64XX_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s3c6410_init_irq, .map_io = smdk6410_map_io, diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c index a5c00952ea3..8a938542c54 100644 --- a/arch/arm/mach-s5p64x0/cpu.c +++ b/arch/arm/mach-s5p64x0/cpu.c @@ -20,6 +20,7 @@ #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/sched.h> +#include <linux/dma-mapping.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -111,6 +112,7 @@ void __init s5p6440_map_io(void) iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); + init_consistent_dma_size(SZ_8M); } void __init s5p6450_map_io(void) @@ -120,6 +122,7 @@ void __init s5p6450_map_io(void) iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc)); + init_consistent_dma_size(SZ_8M); } /* diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S index 79b04e6a6f8..e80ba3c6981 100644 --- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S +++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S @@ -15,7 +15,7 @@ #include <plat/regs-serial.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0xE0000000 orr \rp, \rp, #0x00100000 ldr \rp, [\rp, #0x118 ] diff --git a/arch/arm/mach-s5p64x0/include/mach/memory.h b/arch/arm/mach-s5p64x0/include/mach/memory.h deleted file mode 100644 index 365a6eb4b88..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/memory.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/memory.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - Memory definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H __FILE__ - -#define PLAT_PHYS_OFFSET UL(0x20000000) -#define CONSISTENT_DMA_SIZE SZ_8M - -#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index 346f8dfa6f3..3b84e9bfd07 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -171,7 +171,7 @@ static void __init smdk6440_machine_init(void) MACHINE_START(SMDK6440, "SMDK6440") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .boot_params = S5P64X0_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s5p6440_init_irq, .map_io = smdk6440_map_io, diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c index 33f2adf8f3f..d99d29b5558 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -190,7 +190,7 @@ static void __init smdk6450_machine_init(void) MACHINE_START(SMDK6450, "SMDK6450") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .boot_params = S5P64X0_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s5p6450_init_irq, .map_io = smdk6450_map_io, diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S index b2ba95ddf8e..694f7593700 100644 --- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S @@ -22,7 +22,7 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, = S3C_PA_UART ldr \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h deleted file mode 100644 index bda4e79fd5f..00000000000 --- a/arch/arm/mach-s5pc100/include/mach/memory.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-s5pc100/include/mach/memory.h - * - * Copyright 2008 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * Based on mach-s3c6400/include/mach/memory.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x20000000) - -#endif diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index 227d8908aab..688f45b7cd0 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -254,7 +254,7 @@ static void __init smdkc100_machine_init(void) MACHINE_START(SMDKC100, "SMDKC100") /* Maintainer: Byungho Min <bhmin@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s5pc100_init_irq, .map_io = smdkc100_map_io, .init_machine = smdkc100_machine_init, diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 79907ec78d4..91145720822 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -20,6 +20,7 @@ #include <linux/sysdev.h> #include <linux/platform_device.h> #include <linux/sched.h> +#include <linux/dma-mapping.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -119,6 +120,7 @@ static void s5pv210_sw_reset(void) void __init s5pv210_map_io(void) { iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc)); + init_consistent_dma_size(14 << 20); /* initialise device information early */ s5pv210_default_sdhci0(); diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S index 169fe654a59..79e55597ab6 100644 --- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S @@ -21,7 +21,7 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, = S3C_PA_UART ldr \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h index 7b5fcf0da0c..2d3cfa221d5 100644 --- a/arch/arm/mach-s5pv210/include/mach/memory.h +++ b/arch/arm/mach-s5pv210/include/mach/memory.h @@ -14,7 +14,6 @@ #define __ASM_ARCH_MEMORY_H #define PLAT_PHYS_OFFSET UL(0x20000000) -#define CONSISTENT_DMA_SIZE (SZ_8M + SZ_4M + SZ_2M) /* * Sparsemem support diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 509627f2511..5811a96125f 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -678,7 +678,7 @@ MACHINE_START(AQUILA, "Aquila") /* Maintainers: Marek Szyprowski <m.szyprowski@samsung.com> Kyungmin Park <kyungmin.park@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s5pv210_init_irq, .map_io = aquila_map_io, .init_machine = aquila_machine_init, diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 85c2d51a095..061cc7e4f48 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -897,7 +897,7 @@ static void __init goni_machine_init(void) MACHINE_START(GONI, "GONI") /* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s5pv210_init_irq, .map_io = goni_map_io, .init_machine = goni_machine_init, diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index 6c412c8cecc..f7266bb0cac 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -136,7 +136,7 @@ static void __init smdkc110_machine_init(void) MACHINE_START(SMDKC110, "SMDKC110") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s5pv210_init_irq, .map_io = smdkc110_map_io, .init_machine = smdkc110_machine_init, diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 5e011fc6720..e73e3b6d41b 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -319,7 +319,7 @@ static void __init smdkv210_machine_init(void) MACHINE_START(SMDKV210, "SMDKV210") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s5pv210_init_irq, .map_io = smdkv210_map_io, .init_machine = smdkv210_machine_init, diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c index 925fc0dc625..97cc066c536 100644 --- a/arch/arm/mach-s5pv210/mach-torbreck.c +++ b/arch/arm/mach-s5pv210/mach-torbreck.c @@ -125,7 +125,7 @@ static void __init torbreck_machine_init(void) MACHINE_START(TORBRECK, "TORBRECK") /* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s5pv210_init_irq, .map_io = torbreck_map_io, .init_machine = torbreck_machine_init, diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 26257df19b6..d40da5f1f37 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -447,7 +447,7 @@ static void __init assabet_map_io(void) MACHINE_START(ASSABET, "Intel-Assabet") - .boot_params = 0xc0000100, + .atag_offset = 0x100, .fixup = fixup_assabet, .map_io = assabet_map_io, .init_irq = sa1100_init_irq, diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index b4311b0a439..bda83e1ab07 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -302,7 +302,7 @@ static void __init badge4_map_io(void) } MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4") - .boot_params = 0xc0000100, + .atag_offset = 0x100, .map_io = badge4_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c index 03d7376cf8a..b30733a2b82 100644 --- a/arch/arm/mach-sa1100/h3100.c +++ b/arch/arm/mach-sa1100/h3100.c @@ -84,7 +84,7 @@ static void __init h3100_mach_init(void) } MACHINE_START(H3100, "Compaq iPAQ H3100") - .boot_params = 0xc0000100, + .atag_offset = 0x100, .map_io = h3100_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index 965f64a836f..6fd324d9238 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -125,7 +125,7 @@ static void __init h3600_mach_init(void) } MACHINE_START(H3600, "Compaq iPAQ H3600") - .boot_params = 0xc0000100, + .atag_offset = 0x100, .map_io = h3600_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c index db5e434a17d..30f4a551b8e 100644 --- a/arch/arm/mach-sa1100/hackkit.c +++ b/arch/arm/mach-sa1100/hackkit.c @@ -195,7 +195,7 @@ static void __init hackkit_init(void) */ MACHINE_START(HACKKIT, "HackKit Cpu Board") - .boot_params = 0xc0000100, + .atag_offset = 0x100, .map_io = hackkit_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S index 0cd0fc9635b..530772d937a 100644 --- a/arch/arm/mach-sa1100/include/mach/debug-macro.S +++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S @@ -12,7 +12,7 @@ */ #include <mach/hardware.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mrc p15, 0, \rp, c1, c0 tst \rp, #1 @ MMU enabled? moveq \rp, #0x80000000 @ physical base address diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index 176c066aec7..0bb520d48ed 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -364,7 +364,7 @@ static void __init jornada720_mach_init(void) MACHINE_START(JORNADA720, "HP Jornada 720") /* Maintainer: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> */ - .boot_params = 0xc0000100, + .atag_offset = 0x100, .map_io = jornada720_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index 7b9556b5905..5bc59d0947b 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -61,7 +61,7 @@ static void __init lart_map_io(void) } MACHINE_START(LART, "LART") - .boot_params = 0xc0000100, + .atag_offset = 0x100, .map_io = lart_map_io, .init_irq = sa1100_init_irq, .init_machine = lart_init, diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c index 72087f0658b..032f3881d14 100644 --- a/arch/arm/mach-sa1100/nanoengine.c +++ b/arch/arm/mach-sa1100/nanoengine.c @@ -111,7 +111,7 @@ static void __init nanoengine_init(void) } MACHINE_START(NANOENGINE, "BSE nanoEngine") - .boot_params = 0xc0000000, + .atag_offset = 0x100, .map_io = nanoengine_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index 7917b240557..1cccbf5b9e9 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -82,7 +82,7 @@ static void __init shannon_map_io(void) } MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)") - .boot_params = 0xc0000100, + .atag_offset = 0x100, .map_io = shannon_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index cfb76077bd2..a1c2427655d 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -229,7 +229,7 @@ arch_initcall(simpad_init); MACHINE_START(SIMPAD, "Simpad") /* Maintainer: Holger Freyther */ - .boot_params = 0xc0000100, + .atag_offset = 0x100, .map_io = simpad_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index ac2873c8014..feda3ca7fc9 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -152,7 +152,7 @@ static struct sys_timer shark_timer = { MACHINE_START(SHARK, "Shark") /* Maintainer: Alexander Schulz */ - .boot_params = 0x08003000, + .atag_offset = 0x3000, .map_io = shark_map_io, .init_irq = shark_init_irq, .timer = &shark_timer, diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S index a473f55dc71..20eb2bf2a42 100644 --- a/arch/arm/mach-shark/include/mach/debug-macro.S +++ b/arch/arm/mach-shark/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0xe0000000 orr \rp, \rp, #0x000003f8 mov \rv, \rp diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index cdfdd624d21..5fde49da399 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -37,6 +37,7 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <linux/sh_clk.h> +#include <linux/dma-mapping.h> #include <video/sh_mobile_lcdc.h> #include <video/sh_mipi_dsi.h> #include <sound/sh_fsi.h> @@ -447,6 +448,8 @@ static struct map_desc ag5evm_io_desc[] __initdata = { static void __init ag5evm_map_io(void) { iotable_init(ag5evm_io_desc, ARRAY_SIZE(ag5evm_io_desc)); + /* DMA memory at 0xf6000000 - 0xffdfffff */ + init_consistent_dma_size(158 << 20); /* setup early devices and console here as well */ sh73a0_add_early_devices(); diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 523f608eb8c..b622d8d3ab7 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -42,6 +42,7 @@ #include <linux/leds.h> #include <linux/input/sh_keysc.h> #include <linux/usb/r8a66597.h> +#include <linux/dma-mapping.h> #include <media/sh_mobile_ceu.h> #include <media/sh_mobile_csi2.h> @@ -1170,6 +1171,8 @@ static struct map_desc ap4evb_io_desc[] __initdata = { static void __init ap4evb_map_io(void) { iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc)); + /* DMA memory at 0xf6000000 - 0xffdfffff */ + init_consistent_dma_size(158 << 20); /* setup early devices and console here as well */ sh7372_add_early_devices(); diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c index ef4613b993a..8b620bf0622 100644 --- a/arch/arm/mach-shmobile/board-g3evm.c +++ b/arch/arm/mach-shmobile/board-g3evm.c @@ -32,6 +32,7 @@ #include <linux/gpio.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> +#include <linux/dma-mapping.h> #include <mach/sh7367.h> #include <mach/common.h> #include <asm/mach-types.h> @@ -260,6 +261,8 @@ static struct map_desc g3evm_io_desc[] __initdata = { static void __init g3evm_map_io(void) { iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc)); + /* DMA memory at 0xf6000000 - 0xffdfffff */ + init_consistent_dma_size(158 << 20); /* setup early devices and console here as well */ sh7367_add_early_devices(); diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c index 8e3c5559f27..7719ddc5f59 100644 --- a/arch/arm/mach-shmobile/board-g4evm.c +++ b/arch/arm/mach-shmobile/board-g4evm.c @@ -33,6 +33,7 @@ #include <linux/mmc/host.h> #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/gpio.h> +#include <linux/dma-mapping.h> #include <mach/sh7377.h> #include <mach/common.h> #include <asm/mach-types.h> @@ -274,6 +275,8 @@ static struct map_desc g4evm_io_desc[] __initdata = { static void __init g4evm_map_io(void) { iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc)); + /* DMA memory at 0xf6000000 - 0xffdfffff */ + init_consistent_dma_size(158 << 20); /* setup early devices and console here as well */ sh7377_add_early_devices(); diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 17c19dc2560..de2253d7f15 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -45,6 +45,7 @@ #include <linux/tca6416_keypad.h> #include <linux/usb/r8a66597.h> #include <linux/usb/renesas_usbhs.h> +#include <linux/dma-mapping.h> #include <video/sh_mobile_hdmi.h> #include <video/sh_mobile_lcdc.h> @@ -1381,6 +1382,8 @@ static struct map_desc mackerel_io_desc[] __initdata = { static void __init mackerel_map_io(void) { iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc)); + /* DMA memory at 0xf6000000 - 0xffdfffff */ + init_consistent_dma_size(158 << 20); /* setup early devices and console here as well */ sh7372_add_early_devices(); diff --git a/arch/arm/mach-shmobile/include/mach/memory.h b/arch/arm/mach-shmobile/include/mach/memory.h index ad00c3c258f..0ffbe8155c7 100644 --- a/arch/arm/mach-shmobile/include/mach/memory.h +++ b/arch/arm/mach-shmobile/include/mach/memory.h @@ -4,7 +4,4 @@ #define PLAT_PHYS_OFFSET UL(CONFIG_MEMORY_START) #define MEM_SIZE UL(CONFIG_MEMORY_SIZE) -/* DMA memory at 0xf6000000 - 0xffdfffff */ -#define CONSISTENT_DMA_SIZE (158 << 20) - #endif /* __ASM_MACH_MEMORY_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/memory.h b/arch/arm/mach-spear3xx/include/mach/memory.h deleted file mode 100644 index 51735221ea1..00000000000 --- a/arch/arm/mach-spear3xx/include/mach/memory.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/memory.h - * - * Memory map for SPEAr3xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_MEMORY_H -#define __MACH_MEMORY_H - -#include <plat/memory.h> - -#endif /* __MACH_MEMORY_H */ diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c index 69006f69422..a5ff98eed1d 100644 --- a/arch/arm/mach-spear3xx/spear300_evb.c +++ b/arch/arm/mach-spear3xx/spear300_evb.c @@ -64,7 +64,7 @@ static void __init spear300_evb_init(void) } MACHINE_START(SPEAR300, "ST-SPEAR300-EVB") - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = spear3xx_map_io, .init_irq = spear3xx_init_irq, .timer = &spear3xx_timer, diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c index c8684ce1f9b..45d180d5936 100644 --- a/arch/arm/mach-spear3xx/spear310_evb.c +++ b/arch/arm/mach-spear3xx/spear310_evb.c @@ -70,7 +70,7 @@ static void __init spear310_evb_init(void) } MACHINE_START(SPEAR310, "ST-SPEAR310-EVB") - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = spear3xx_map_io, .init_irq = spear3xx_init_irq, .timer = &spear3xx_timer, diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c index a12b353940d..22879848d73 100644 --- a/arch/arm/mach-spear3xx/spear320_evb.c +++ b/arch/arm/mach-spear3xx/spear320_evb.c @@ -68,7 +68,7 @@ static void __init spear320_evb_init(void) } MACHINE_START(SPEAR320, "ST-SPEAR320-EVB") - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = spear3xx_map_io, .init_irq = spear3xx_init_irq, .timer = &spear3xx_timer, diff --git a/arch/arm/mach-spear6xx/include/mach/memory.h b/arch/arm/mach-spear6xx/include/mach/memory.h deleted file mode 100644 index 781f088fc22..00000000000 --- a/arch/arm/mach-spear6xx/include/mach/memory.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/memory.h - * - * Memory map for SPEAr6xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_MEMORY_H -#define __MACH_MEMORY_H - -#include <plat/memory.h> - -#endif /* __MACH_MEMORY_H */ diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c index f19cefe91a2..8238fe38e71 100644 --- a/arch/arm/mach-spear6xx/spear600_evb.c +++ b/arch/arm/mach-spear6xx/spear600_evb.c @@ -43,7 +43,7 @@ static void __init spear600_evb_init(void) } MACHINE_START(SPEAR600, "ST-SPEAR600-EVB") - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = spear6xx_map_io, .init_irq = spear6xx_init_irq, .timer = &spear6xx_timer, diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c index 4cb3c2dd905..777a5bb9eed 100644 --- a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c +++ b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c @@ -73,7 +73,7 @@ static void __init tcc8k_map_io(void) } MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board") - .boot_params = PLAT_PHYS_OFFSET + 0x00000100, + .atag_offset = 0x100, .map_io = tcc8k_map_io, .init_irq = tcc8k_init_irq, .init_machine = tcc8k_init, diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c index 846cd7d69e3..a4d1980e697 100644 --- a/arch/arm/mach-tegra/board-harmony.c +++ b/arch/arm/mach-tegra/board-harmony.c @@ -179,7 +179,7 @@ static void __init tegra_harmony_init(void) } MACHINE_START(HARMONY, "harmony") - .boot_params = 0x00000100, + .atag_offset = 0x100, .fixup = tegra_harmony_fixup, .map_io = tegra_map_common_io, .init_early = tegra_init_early, diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index ea2f79c9879..3197c4cbaa7 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -127,7 +127,7 @@ static void __init tegra_paz00_init(void) } MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ") - .boot_params = 0x00000100, + .atag_offset = 0x100, .fixup = tegra_paz00_fixup, .map_io = tegra_map_common_io, .init_early = tegra_init_early, diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c index 56cbabf6aa6..9e98ac706f4 100644 --- a/arch/arm/mach-tegra/board-seaboard.c +++ b/arch/arm/mach-tegra/board-seaboard.c @@ -201,7 +201,7 @@ static void __init tegra_wario_init(void) MACHINE_START(SEABOARD, "seaboard") - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = tegra_map_common_io, .init_early = tegra_init_early, .init_irq = tegra_init_irq, @@ -210,7 +210,7 @@ MACHINE_START(SEABOARD, "seaboard") MACHINE_END MACHINE_START(KAEN, "kaen") - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = tegra_map_common_io, .init_early = tegra_init_early, .init_irq = tegra_init_irq, @@ -219,7 +219,7 @@ MACHINE_START(KAEN, "kaen") MACHINE_END MACHINE_START(WARIO, "wario") - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = tegra_map_common_io, .init_early = tegra_init_early, .init_irq = tegra_init_irq, diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c index 89a6d2adc1d..8489aa8f515 100644 --- a/arch/arm/mach-tegra/board-trimslice.c +++ b/arch/arm/mach-tegra/board-trimslice.c @@ -171,7 +171,7 @@ static void __init tegra_trimslice_init(void) } MACHINE_START(TRIMSLICE, "trimslice") - .boot_params = 0x00000100, + .atag_offset = 0x100, .fixup = tegra_trimslice_fixup, .map_io = tegra_map_common_io, .init_early = tegra_init_early, diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S index e0ebe65c165..619abc63aee 100644 --- a/arch/arm/mach-tegra/include/mach/debug-macro.S +++ b/arch/arm/mach-tegra/include/mach/debug-macro.S @@ -21,7 +21,7 @@ #include <mach/io.h> #include <mach/iomap.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =IO_APB_PHYS @ physical ldr \rv, =IO_APB_VIRT @ virtual orr \rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF) diff --git a/arch/arm/mach-tegra/include/mach/memory.h b/arch/arm/mach-tegra/include/mach/memory.h deleted file mode 100644 index 537db3aa81a..00000000000 --- a/arch/arm/mach-tegra/include/mach/memory.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/memory.h - * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Colin Cross <ccross@google.com> - * Erik Gilling <konkers@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __MACH_TEGRA_MEMORY_H -#define __MACH_TEGRA_MEMORY_H - -/* physical offset of RAM */ -#define PLAT_PHYS_OFFSET UL(0) - -#endif - diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 399c89f14df..376b6dfdfae 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -25,6 +25,7 @@ #include <linux/err.h> #include <linux/mtd/nand.h> #include <linux/mtd/fsmc.h> +#include <linux/dma-mapping.h> #include <asm/types.h> #include <asm/setup.h> @@ -92,6 +93,8 @@ static struct map_desc u300_io_desc[] __initdata = { void __init u300_map_io(void) { iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc)); + /* We enable a real big DMA buffer if need be. */ + init_consistent_dma_size(SZ_4M); } /* diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S index df715707bea..8ae8e4ab34b 100644 --- a/arch/arm/mach-u300/include/mach/debug-macro.S +++ b/arch/arm/mach-u300/include/mach/debug-macro.S @@ -10,7 +10,7 @@ */ #include <mach/hardware.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp /* If we move the address using MMU, use this. */ ldr \rp, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address ldr \rv, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h index 888e2e351ee..7034bae95de 100644 --- a/arch/arm/mach-u300/include/mach/memory.h +++ b/arch/arm/mach-u300/include/mach/memory.h @@ -16,7 +16,7 @@ #ifdef CONFIG_MACH_U300_DUAL_RAM #define PLAT_PHYS_OFFSET UL(0x48000000) -#define BOOT_PARAMS_OFFSET (PHYS_OFFSET + 0x100) +#define BOOT_PARAMS_OFFSET 0x100 #else @@ -24,19 +24,14 @@ #define PLAT_PHYS_OFFSET (0x28000000 + \ (CONFIG_MACH_U300_ACCESS_MEM_SIZE - \ (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024) +#define BOOT_PARAMS_OFFSET (0x100 + \ + (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1)*1024*1024*2) #else #define PLAT_PHYS_OFFSET (0x28000000 + \ (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \ (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024) +#define BOOT_PARAMS_OFFSET 0x100 #endif -#define BOOT_PARAMS_OFFSET (0x28000000 + \ - (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \ - (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100) #endif -/* - * We enable a real big DMA buffer if need be. - */ -#define CONSISTENT_DMA_SIZE SZ_4M - #endif diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c index 48b3b7f3996..80e7305589c 100644 --- a/arch/arm/mach-u300/u300.c +++ b/arch/arm/mach-u300/u300.c @@ -61,7 +61,7 @@ static void __init u300_init_machine(void) MACHINE_START(U300, MACH_U300_STRING) /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */ - .boot_params = BOOT_PARAMS_OFFSET, + .atag_offset = BOOT_PARAMS_OFFSET, .map_io = u300_map_io, .reserve = u300_reserve, .init_irq = u300_init_irq, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index cd54abaccd9..2cc4876db21 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -645,7 +645,7 @@ static void __init mop500_init_machine(void) MACHINE_START(U8500, "ST-Ericsson MOP500 platform") /* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */ - .boot_params = 0x100, + .atag_offset = 0x100, .map_io = u8500_map_io, .init_irq = ux500_init_irq, /* we re-use nomadik timer here */ @@ -654,7 +654,7 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform") MACHINE_END MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") - .boot_params = 0x100, + .atag_offset = 0x100, .map_io = u8500_map_io, .init_irq = ux500_init_irq, .timer = &ux500_timer, @@ -662,7 +662,7 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") MACHINE_END MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") - .boot_params = 0x100, + .atag_offset = 0x100, .map_io = u8500_map_io, .init_irq = ux500_init_irq, /* we re-use nomadik timer here */ diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c index e58f0f56242..166d47a5f4f 100644 --- a/arch/arm/mach-ux500/board-u5500.c +++ b/arch/arm/mach-ux500/board-u5500.c @@ -118,7 +118,7 @@ static void __init u5500_init_machine(void) } MACHINE_START(U5500, "ST-Ericsson U5500 Platform") - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = u5500_map_io, .init_irq = ux500_init_irq, .timer = &ux500_timer, diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S index 700fb05ee81..8d74d927d4e 100644 --- a/arch/arm/mach-ux500/include/mach/debug-macro.S +++ b/arch/arm/mach-ux500/include/mach/debug-macro.S @@ -35,7 +35,7 @@ #define UX500_UART(n) __UX500_UART(n) #define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART) - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =UART_BASE @ no, physical address ldr \rv, =IO_ADDRESS(UART_BASE) @ yes, virtual address .endm diff --git a/arch/arm/mach-ux500/include/mach/memory.h b/arch/arm/mach-ux500/include/mach/memory.h deleted file mode 100644 index 2ef697a6700..00000000000 --- a/arch/arm/mach-ux500/include/mach/memory.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x00000000) -#define BUS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S index eb2cf7dc5c4..d0fbd7f1cb0 100644 --- a/arch/arm/mach-versatile/include/mach/debug-macro.S +++ b/arch/arm/mach-versatile/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x001F0000 orr \rp, \rp, #0x00001000 orr \rv, \rp, #0xf1000000 @ virtual base diff --git a/arch/arm/mach-versatile/include/mach/memory.h b/arch/arm/mach-versatile/include/mach/memory.h deleted file mode 100644 index dacc9d8e4e6..00000000000 --- a/arch/arm/mach-versatile/include/mach/memory.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-versatile/include/mach/memory.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c index f8ae64b3eed..fda4866703c 100644 --- a/arch/arm/mach-versatile/versatile_ab.c +++ b/arch/arm/mach-versatile/versatile_ab.c @@ -35,7 +35,7 @@ MACHINE_START(VERSATILE_AB, "ARM-Versatile AB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = versatile_map_io, .init_early = versatile_init_early, .init_irq = versatile_init_irq, diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c index 37c23dfeefb..feaf9cbe60f 100644 --- a/arch/arm/mach-versatile/versatile_pb.c +++ b/arch/arm/mach-versatile/versatile_pb.c @@ -103,7 +103,7 @@ static void __init versatile_pb_init(void) MACHINE_START(VERSATILE_PB, "ARM-Versatile PB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = versatile_map_io, .init_early = versatile_init_early, .init_irq = versatile_init_irq, diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S index 050d65e02a4..fd9e6c7ea49 100644 --- a/arch/arm/mach-vexpress/include/mach/debug-macro.S +++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S @@ -12,7 +12,7 @@ #define DEBUG_LL_UART_OFFSET 0x00009000 - .macro addruart,rp,rv + .macro addruart,rp,rv,tmp mov \rp, #DEBUG_LL_UART_OFFSET orr \rv, \rp, #0xf8000000 @ virtual base orr \rp, \rp, #0x10000000 @ physical base diff --git a/arch/arm/mach-vexpress/include/mach/memory.h b/arch/arm/mach-vexpress/include/mach/memory.h deleted file mode 100644 index 5b7fcd439d8..00000000000 --- a/arch/arm/mach-vexpress/include/mach/memory.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * arch/arm/mach-vexpress/include/mach/memory.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x60000000) - -#endif diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index d0d267a8d3f..1fafc324460 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -443,7 +443,7 @@ static void __init v2m_init(void) } MACHINE_START(VEXPRESS, "ARM-Versatile Express") - .boot_params = PLAT_PHYS_OFFSET + 0x00000100, + .atag_offset = 0x100, .map_io = v2m_map_io, .init_early = v2m_init_early, .init_irq = v2m_init_irq, diff --git a/arch/arm/mach-vt8500/bv07.c b/arch/arm/mach-vt8500/bv07.c index 94a261d86bf..a464c758441 100644 --- a/arch/arm/mach-vt8500/bv07.c +++ b/arch/arm/mach-vt8500/bv07.c @@ -68,7 +68,7 @@ void __init bv07_init(void) } MACHINE_START(BV07, "Benign BV07 Mini Netbook") - .boot_params = 0x00000100, + .atag_offset = 0x100, .reserve = vt8500_reserve_mem, .map_io = vt8500_map_io, .init_irq = vt8500_init_irq, diff --git a/arch/arm/mach-vt8500/include/mach/debug-macro.S b/arch/arm/mach-vt8500/include/mach/debug-macro.S index f1191626ad5..ca292f29d4a 100644 --- a/arch/arm/mach-vt8500/include/mach/debug-macro.S +++ b/arch/arm/mach-vt8500/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00200000 orr \rv, \rp, #0xf8000000 orr \rp, \rp, #0xd8000000 diff --git a/arch/arm/mach-vt8500/include/mach/memory.h b/arch/arm/mach-vt8500/include/mach/memory.h deleted file mode 100644 index 175f914eff9..00000000000 --- a/arch/arm/mach-vt8500/include/mach/memory.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-vt8500/include/mach/memory.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-vt8500/wm8505_7in.c b/arch/arm/mach-vt8500/wm8505_7in.c index e73aadbcafd..cf910a95608 100644 --- a/arch/arm/mach-vt8500/wm8505_7in.c +++ b/arch/arm/mach-vt8500/wm8505_7in.c @@ -68,7 +68,7 @@ void __init wm8505_7in_init(void) } MACHINE_START(WM8505_7IN_NETBOOK, "WM8505 7-inch generic netbook") - .boot_params = 0x00000100, + .atag_offset = 0x100, .reserve = wm8505_reserve_mem, .map_io = wm8505_map_io, .init_irq = wm8505_init_irq, diff --git a/arch/arm/mach-w90x900/include/mach/memory.h b/arch/arm/mach-w90x900/include/mach/memory.h deleted file mode 100644 index f02905ba774..00000000000 --- a/arch/arm/mach-w90x900/include/mach/memory.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/arm/mach-w90x900/include/mach/memory.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * Based on arch/arm/mach-s3c2410/include/mach/memory.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c index 30fccde94fb..31c10901822 100644 --- a/arch/arm/mach-w90x900/mach-nuc910evb.c +++ b/arch/arm/mach-w90x900/mach-nuc910evb.c @@ -34,7 +34,6 @@ static void __init nuc910evb_init(void) MACHINE_START(W90P910EVB, "W90P910EVB") /* Maintainer: Wan ZongShun */ - .boot_params = 0, .map_io = nuc910evb_map_io, .init_irq = nuc900_init_irq, .init_machine = nuc910evb_init, diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c index 590c99b96dc..4062e55a57d 100644 --- a/arch/arm/mach-w90x900/mach-nuc950evb.c +++ b/arch/arm/mach-w90x900/mach-nuc950evb.c @@ -37,7 +37,6 @@ static void __init nuc950evb_init(void) MACHINE_START(W90P950EVB, "W90P950EVB") /* Maintainer: Wan ZongShun */ - .boot_params = 0, .map_io = nuc950evb_map_io, .init_irq = nuc900_init_irq, .init_machine = nuc950evb_init, diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c index e09c645d61b..0ab9995d5b5 100644 --- a/arch/arm/mach-w90x900/mach-nuc960evb.c +++ b/arch/arm/mach-w90x900/mach-nuc960evb.c @@ -34,7 +34,6 @@ static void __init nuc960evb_init(void) MACHINE_START(W90N960EVB, "W90N960EVB") /* Maintainer: Wan ZongShun */ - .boot_params = 0, .map_io = nuc960evb_map_io, .init_irq = nuc900_init_irq, .init_machine = nuc960evb_init, diff --git a/arch/arm/mach-zynq/include/mach/debug-macro.S b/arch/arm/mach-zynq/include/mach/debug-macro.S index 9f664d5eb81..3ab0be1f619 100644 --- a/arch/arm/mach-zynq/include/mach/debug-macro.S +++ b/arch/arm/mach-zynq/include/mach/debug-macro.S @@ -17,7 +17,7 @@ #include <mach/zynq_soc.h> #include <mach/uart.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =LL_UART_PADDR @ physical ldr \rv, =LL_UART_VADDR @ virtual .endm diff --git a/arch/arm/mach-zynq/include/mach/memory.h b/arch/arm/mach-zynq/include/mach/memory.h deleted file mode 100644 index 35a92634dcc..00000000000 --- a/arch/arm/mach-zynq/include/mach/memory.h +++ /dev/null @@ -1,22 +0,0 @@ -/* arch/arm/mach-zynq/include/mach/memory.h - * - * Copyright (C) 2011 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_MEMORY_H__ -#define __MACH_MEMORY_H__ - -#include <asm/sizes.h> - -#define PLAT_PHYS_OFFSET UL(0x0) - -#endif diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 0a0a1e7c20d..50be842e89f 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -18,12 +18,14 @@ #include <linux/device.h> #include <linux/dma-mapping.h> #include <linux/highmem.h> +#include <linux/slab.h> #include <asm/memory.h> #include <asm/highmem.h> #include <asm/cacheflush.h> #include <asm/tlbflush.h> #include <asm/sizes.h> +#include <asm/mach/arch.h> #include "mm.h" @@ -117,26 +119,37 @@ static void __dma_free_buffer(struct page *page, size_t size) } #ifdef CONFIG_MMU -/* Sanity check size */ -#if (CONSISTENT_DMA_SIZE % SZ_2M) -#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB" -#endif -#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT) -#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT) -#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT) + +#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - consistent_base) >> PAGE_SHIFT) +#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - consistent_base) >> PGDIR_SHIFT) /* * These are the page tables (2MB each) covering uncached, DMA consistent allocations */ -static pte_t *consistent_pte[NUM_CONSISTENT_PTES]; +static pte_t **consistent_pte; + +#define DEFAULT_CONSISTENT_DMA_SIZE SZ_2M + +unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE; + +void __init init_consistent_dma_size(unsigned long size) +{ + unsigned long base = CONSISTENT_END - ALIGN(size, SZ_2M); + + BUG_ON(consistent_pte); /* Check we're called before DMA region init */ + BUG_ON(base < VMALLOC_END); + + /* Grow region to accommodate specified size */ + if (base < consistent_base) + consistent_base = base; +} #include "vmregion.h" static struct arm_vmregion_head consistent_head = { .vm_lock = __SPIN_LOCK_UNLOCKED(&consistent_head.vm_lock), .vm_list = LIST_HEAD_INIT(consistent_head.vm_list), - .vm_start = CONSISTENT_BASE, .vm_end = CONSISTENT_END, }; @@ -155,7 +168,17 @@ static int __init consistent_init(void) pmd_t *pmd; pte_t *pte; int i = 0; - u32 base = CONSISTENT_BASE; + unsigned long base = consistent_base; + unsigned long num_ptes = (CONSISTENT_END - base) >> PGDIR_SHIFT; + + consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL); + if (!consistent_pte) { + pr_err("%s: no memory\n", __func__); + return -ENOMEM; + } + + pr_debug("DMA memory: 0x%08lx - 0x%08lx:\n", base, CONSISTENT_END); + consistent_head.vm_start = base; do { pgd = pgd_offset(&init_mm, base); @@ -198,7 +221,7 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot) size_t align; int bit; - if (!consistent_pte[0]) { + if (!consistent_pte) { printk(KERN_ERR "%s: not initialised\n", __func__); dump_stack(); return NULL; diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index cc7e2d8be9a..34409a08ba0 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -653,9 +653,6 @@ void __init mem_init(void) " ITCM : 0x%08lx - 0x%08lx (%4ld kB)\n" #endif " fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n" -#ifdef CONFIG_MMU - " DMA : 0x%08lx - 0x%08lx (%4ld MB)\n" -#endif " vmalloc : 0x%08lx - 0x%08lx (%4ld MB)\n" " lowmem : 0x%08lx - 0x%08lx (%4ld MB)\n" #ifdef CONFIG_HIGHMEM @@ -674,9 +671,6 @@ void __init mem_init(void) MLK(ITCM_OFFSET, (unsigned long) itcm_end), #endif MLK(FIXADDR_START, FIXADDR_TOP), -#ifdef CONFIG_MMU - MLM(CONSISTENT_BASE, CONSISTENT_END), -#endif MLM(VMALLOC_START, VMALLOC_END), MLM(PAGE_OFFSET, (unsigned long)high_memory), #ifdef CONFIG_HIGHMEM @@ -699,9 +693,6 @@ void __init mem_init(void) * be detected at build time already. */ #ifdef CONFIG_MMU - BUILD_BUG_ON(VMALLOC_END > CONSISTENT_BASE); - BUG_ON(VMALLOC_END > CONSISTENT_BASE); - BUILD_BUG_ON(TASK_SIZE > MODULES_VADDR); BUG_ON(TASK_SIZE > MODULES_VADDR); #endif diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 594d677b92c..ea9c9f3e48b 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -273,6 +273,14 @@ static struct mem_type mem_types[] = { .prot_l1 = PMD_TYPE_TABLE, .domain = DOMAIN_KERNEL, }, + [MT_MEMORY_SO] = { + .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | + L_PTE_MT_UNCACHED, + .prot_l1 = PMD_TYPE_TABLE, + .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S | + PMD_SECT_UNCACHED | PMD_SECT_XN, + .domain = DOMAIN_KERNEL, + }, }; const struct mem_type *get_mem_type(unsigned int type) diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 2e6849b41f6..88fb3d9e064 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -379,31 +379,26 @@ ENTRY(cpu_arm920_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm920_suspend_size -.equ cpu_arm920_suspend_size, 4 * 4 +.equ cpu_arm920_suspend_size, 4 * 3 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_arm920_do_suspend) - stmfd sp!, {r4 - r7, lr} + stmfd sp!, {r4 - r6, lr} mrc p15, 0, r4, c13, c0, 0 @ PID mrc p15, 0, r5, c3, c0, 0 @ Domain ID - mrc p15, 0, r6, c2, c0, 0 @ TTB address - mrc p15, 0, r7, c1, c0, 0 @ Control register - stmia r0, {r4 - r7} - ldmfd sp!, {r4 - r7, pc} + mrc p15, 0, r6, c1, c0, 0 @ Control register + stmia r0, {r4 - r6} + ldmfd sp!, {r4 - r6, pc} ENDPROC(cpu_arm920_do_suspend) ENTRY(cpu_arm920_do_resume) mov ip, #0 mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches - ldmia r0, {r4 - r7} + ldmia r0, {r4 - r6} mcr p15, 0, r4, c13, c0, 0 @ PID mcr p15, 0, r5, c3, c0, 0 @ Domain ID - mcr p15, 0, r6, c2, c0, 0 @ TTB address - mov r0, r7 @ control register - mov r2, r6, lsr #14 @ get TTB0 base - mov r2, r2, lsl #14 - ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE + mcr p15, 0, r1, c2, c0, 0 @ TTB address + mov r0, r6 @ control register b cpu_resume_mmu ENDPROC(cpu_arm920_do_resume) #endif diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index cd8f79c3a28..9f8fd91f918 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -394,31 +394,26 @@ ENTRY(cpu_arm926_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm926_suspend_size -.equ cpu_arm926_suspend_size, 4 * 4 +.equ cpu_arm926_suspend_size, 4 * 3 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_arm926_do_suspend) - stmfd sp!, {r4 - r7, lr} + stmfd sp!, {r4 - r6, lr} mrc p15, 0, r4, c13, c0, 0 @ PID mrc p15, 0, r5, c3, c0, 0 @ Domain ID - mrc p15, 0, r6, c2, c0, 0 @ TTB address - mrc p15, 0, r7, c1, c0, 0 @ Control register - stmia r0, {r4 - r7} - ldmfd sp!, {r4 - r7, pc} + mrc p15, 0, r6, c1, c0, 0 @ Control register + stmia r0, {r4 - r6} + ldmfd sp!, {r4 - r6, pc} ENDPROC(cpu_arm926_do_suspend) ENTRY(cpu_arm926_do_resume) mov ip, #0 mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches - ldmia r0, {r4 - r7} + ldmia r0, {r4 - r6} mcr p15, 0, r4, c13, c0, 0 @ PID mcr p15, 0, r5, c3, c0, 0 @ Domain ID - mcr p15, 0, r6, c2, c0, 0 @ TTB address - mov r0, r7 @ control register - mov r2, r6, lsr #14 @ get TTB0 base - mov r2, r2, lsl #14 - ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE + mcr p15, 0, r1, c2, c0, 0 @ TTB address + mov r0, r6 @ control register b cpu_resume_mmu ENDPROC(cpu_arm926_do_resume) #endif diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 69e7f2ef738..7d91545d089 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -168,20 +168,19 @@ ENTRY(cpu_sa1100_set_pte_ext) mov pc, lr .globl cpu_sa1100_suspend_size -.equ cpu_sa1100_suspend_size, 4*4 +.equ cpu_sa1100_suspend_size, 4 * 3 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_sa1100_do_suspend) - stmfd sp!, {r4 - r7, lr} + stmfd sp!, {r4 - r6, lr} mrc p15, 0, r4, c3, c0, 0 @ domain ID - mrc p15, 0, r5, c2, c0, 0 @ translation table base addr - mrc p15, 0, r6, c13, c0, 0 @ PID - mrc p15, 0, r7, c1, c0, 0 @ control reg - stmia r0, {r4 - r7} @ store cp regs - ldmfd sp!, {r4 - r7, pc} + mrc p15, 0, r5, c13, c0, 0 @ PID + mrc p15, 0, r6, c1, c0, 0 @ control reg + stmia r0, {r4 - r6} @ store cp regs + ldmfd sp!, {r4 - r6, pc} ENDPROC(cpu_sa1100_do_suspend) ENTRY(cpu_sa1100_do_resume) - ldmia r0, {r4 - r7} @ load cp regs + ldmia r0, {r4 - r6} @ load cp regs mov ip, #0 mcr p15, 0, ip, c8, c7, 0 @ flush I+D TLBs mcr p15, 0, ip, c7, c7, 0 @ flush I&D cache @@ -189,13 +188,9 @@ ENTRY(cpu_sa1100_do_resume) mcr p15, 0, ip, c9, c0, 5 @ allow user space to use RB mcr p15, 0, r4, c3, c0, 0 @ domain ID - mcr p15, 0, r5, c2, c0, 0 @ translation table base addr - mcr p15, 0, r6, c13, c0, 0 @ PID - mov r0, r7 @ control register - mov r2, r5, lsr #14 @ get TTB0 base - mov r2, r2, lsl #14 - ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE + mcr p15, 0, r1, c2, c0, 0 @ translation table base addr + mcr p15, 0, r5, c13, c0, 0 @ PID + mov r0, r6 @ control register b cpu_resume_mmu ENDPROC(cpu_sa1100_do_resume) #endif diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index a923aa0fd00..d061d2fa550 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -128,20 +128,18 @@ ENTRY(cpu_v6_set_pte_ext) /* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */ .globl cpu_v6_suspend_size -.equ cpu_v6_suspend_size, 4 * 8 +.equ cpu_v6_suspend_size, 4 * 6 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_v6_do_suspend) - stmfd sp!, {r4 - r11, lr} + stmfd sp!, {r4 - r9, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID - mrc p15, 0, r5, c13, c0, 1 @ Context ID - mrc p15, 0, r6, c3, c0, 0 @ Domain ID - mrc p15, 0, r7, c2, c0, 0 @ Translation table base 0 - mrc p15, 0, r8, c2, c0, 1 @ Translation table base 1 - mrc p15, 0, r9, c1, c0, 1 @ auxiliary control register - mrc p15, 0, r10, c1, c0, 2 @ co-processor access control - mrc p15, 0, r11, c1, c0, 0 @ control register - stmia r0, {r4 - r11} - ldmfd sp!, {r4- r11, pc} + mrc p15, 0, r5, c3, c0, 0 @ Domain ID + mrc p15, 0, r6, c2, c0, 1 @ Translation table base 1 + mrc p15, 0, r7, c1, c0, 1 @ auxiliary control register + mrc p15, 0, r8, c1, c0, 2 @ co-processor access control + mrc p15, 0, r9, c1, c0, 0 @ control register + stmia r0, {r4 - r9} + ldmfd sp!, {r4- r9, pc} ENDPROC(cpu_v6_do_suspend) ENTRY(cpu_v6_do_resume) @@ -150,25 +148,21 @@ ENTRY(cpu_v6_do_resume) mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache mcr p15, 0, ip, c7, c15, 0 @ clean+invalidate cache mcr p15, 0, ip, c7, c10, 4 @ drain write buffer - ldmia r0, {r4 - r11} + mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID + ldmia r0, {r4 - r9} mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID - mcr p15, 0, r5, c13, c0, 1 @ Context ID - mcr p15, 0, r6, c3, c0, 0 @ Domain ID - mcr p15, 0, r7, c2, c0, 0 @ Translation table base 0 - mcr p15, 0, r8, c2, c0, 1 @ Translation table base 1 - mcr p15, 0, r9, c1, c0, 1 @ auxiliary control register - mcr p15, 0, r10, c1, c0, 2 @ co-processor access control + mcr p15, 0, r5, c3, c0, 0 @ Domain ID + ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP) + ALT_UP(orr r1, r1, #TTB_FLAGS_UP) + mcr p15, 0, r1, c2, c0, 0 @ Translation table base 0 + mcr p15, 0, r6, c2, c0, 1 @ Translation table base 1 + mcr p15, 0, r7, c1, c0, 1 @ auxiliary control register + mcr p15, 0, r8, c1, c0, 2 @ co-processor access control mcr p15, 0, ip, c2, c0, 2 @ TTB control register mcr p15, 0, ip, c7, c5, 4 @ ISB - mov r0, r11 @ control register - mov r2, r7, lsr #14 @ get TTB0 base - mov r2, r2, lsl #14 - ldr r3, cpu_resume_l1_flags + mov r0, r9 @ control register b cpu_resume_mmu ENDPROC(cpu_v6_do_resume) -cpu_resume_l1_flags: - ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP) - ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP) #endif string cpu_v6_name, "ARMv6-compatible processor" diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 9049c0764db..6af366ce016 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -217,56 +217,50 @@ ENDPROC(cpu_v7_set_pte_ext) /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */ .globl cpu_v7_suspend_size -.equ cpu_v7_suspend_size, 4 * 9 +.equ cpu_v7_suspend_size, 4 * 7 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_v7_do_suspend) - stmfd sp!, {r4 - r11, lr} + stmfd sp!, {r4 - r10, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID - mrc p15, 0, r5, c13, c0, 1 @ Context ID - mrc p15, 0, r6, c13, c0, 3 @ User r/o thread ID - stmia r0!, {r4 - r6} + mrc p15, 0, r5, c13, c0, 3 @ User r/o thread ID + stmia r0!, {r4 - r5} mrc p15, 0, r6, c3, c0, 0 @ Domain ID - mrc p15, 0, r7, c2, c0, 0 @ TTB 0 - mrc p15, 0, r8, c2, c0, 1 @ TTB 1 - mrc p15, 0, r9, c1, c0, 0 @ Control register - mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register - mrc p15, 0, r11, c1, c0, 2 @ Co-processor access control - stmia r0, {r6 - r11} - ldmfd sp!, {r4 - r11, pc} + mrc p15, 0, r7, c2, c0, 1 @ TTB 1 + mrc p15, 0, r8, c1, c0, 0 @ Control register + mrc p15, 0, r9, c1, c0, 1 @ Auxiliary control register + mrc p15, 0, r10, c1, c0, 2 @ Co-processor access control + stmia r0, {r6 - r10} + ldmfd sp!, {r4 - r10, pc} ENDPROC(cpu_v7_do_suspend) ENTRY(cpu_v7_do_resume) mov ip, #0 mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache - ldmia r0!, {r4 - r6} + mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID + ldmia r0!, {r4 - r5} mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID - mcr p15, 0, r5, c13, c0, 1 @ Context ID - mcr p15, 0, r6, c13, c0, 3 @ User r/o thread ID - ldmia r0, {r6 - r11} + mcr p15, 0, r5, c13, c0, 3 @ User r/o thread ID + ldmia r0, {r6 - r10} mcr p15, 0, r6, c3, c0, 0 @ Domain ID - mcr p15, 0, r7, c2, c0, 0 @ TTB 0 - mcr p15, 0, r8, c2, c0, 1 @ TTB 1 + ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP) + ALT_UP(orr r1, r1, #TTB_FLAGS_UP) + mcr p15, 0, r1, c2, c0, 0 @ TTB 0 + mcr p15, 0, r7, c2, c0, 1 @ TTB 1 mcr p15, 0, ip, c2, c0, 2 @ TTB control register mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register - teq r4, r10 @ Is it already set? - mcrne p15, 0, r10, c1, c0, 1 @ No, so write it - mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control + teq r4, r9 @ Is it already set? + mcrne p15, 0, r9, c1, c0, 1 @ No, so write it + mcr p15, 0, r10, c1, c0, 2 @ Co-processor access control ldr r4, =PRRR @ PRRR ldr r5, =NMRR @ NMRR mcr p15, 0, r4, c10, c2, 0 @ write PRRR mcr p15, 0, r5, c10, c2, 1 @ write NMRR isb dsb - mov r0, r9 @ control register - mov r2, r7, lsr #14 @ get TTB0 base - mov r2, r2, lsl #14 - ldr r3, cpu_resume_l1_flags + mov r0, r8 @ control register b cpu_resume_mmu ENDPROC(cpu_v7_do_resume) -cpu_resume_l1_flags: - ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP) - ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP) #endif __CPUINIT diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 755e1bf2268..abf0507a08a 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -406,24 +406,23 @@ ENTRY(cpu_xsc3_set_pte_ext) .align .globl cpu_xsc3_suspend_size -.equ cpu_xsc3_suspend_size, 4 * 7 +.equ cpu_xsc3_suspend_size, 4 * 6 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_xsc3_do_suspend) - stmfd sp!, {r4 - r10, lr} + stmfd sp!, {r4 - r9, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode mrc p15, 0, r5, c15, c1, 0 @ CP access reg mrc p15, 0, r6, c13, c0, 0 @ PID mrc p15, 0, r7, c3, c0, 0 @ domain ID - mrc p15, 0, r8, c2, c0, 0 @ translation table base addr - mrc p15, 0, r9, c1, c0, 1 @ auxiliary control reg - mrc p15, 0, r10, c1, c0, 0 @ control reg + mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg + mrc p15, 0, r9, c1, c0, 0 @ control reg bic r4, r4, #2 @ clear frequency change bit - stmia r0, {r4 - r10} @ store cp regs - ldmia sp!, {r4 - r10, pc} + stmia r0, {r4 - r9} @ store cp regs + ldmia sp!, {r4 - r9, pc} ENDPROC(cpu_xsc3_do_suspend) ENTRY(cpu_xsc3_do_resume) - ldmia r0, {r4 - r10} @ load cp regs + ldmia r0, {r4 - r9} @ load cp regs mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer @@ -433,15 +432,10 @@ ENTRY(cpu_xsc3_do_resume) mcr p15, 0, r5, c15, c1, 0 @ CP access reg mcr p15, 0, r6, c13, c0, 0 @ PID mcr p15, 0, r7, c3, c0, 0 @ domain ID - mcr p15, 0, r8, c2, c0, 0 @ translation table base addr - mcr p15, 0, r9, c1, c0, 1 @ auxiliary control reg - - @ temporarily map resume_turn_on_mmu into the page table, - @ otherwise prefetch abort occurs after MMU is turned on - mov r0, r10 @ control register - mov r2, r8, lsr #14 @ get TTB0 base - mov r2, r2, lsl #14 - ldr r3, =0x542e @ section flags + orr r1, r1, #0x18 @ cache the page table in L2 + mcr p15, 0, r1, c2, c0, 0 @ translation table base addr + mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg + mov r0, r9 @ control register b cpu_resume_mmu ENDPROC(cpu_xsc3_do_resume) #endif diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index fbc06e55b87..3277904beba 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -520,24 +520,23 @@ ENTRY(cpu_xscale_set_pte_ext) .align .globl cpu_xscale_suspend_size -.equ cpu_xscale_suspend_size, 4 * 7 +.equ cpu_xscale_suspend_size, 4 * 6 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_xscale_do_suspend) - stmfd sp!, {r4 - r10, lr} + stmfd sp!, {r4 - r9, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode mrc p15, 0, r5, c15, c1, 0 @ CP access reg mrc p15, 0, r6, c13, c0, 0 @ PID mrc p15, 0, r7, c3, c0, 0 @ domain ID - mrc p15, 0, r8, c2, c0, 0 @ translation table base addr - mrc p15, 0, r9, c1, c1, 0 @ auxiliary control reg - mrc p15, 0, r10, c1, c0, 0 @ control reg + mrc p15, 0, r8, c1, c1, 0 @ auxiliary control reg + mrc p15, 0, r9, c1, c0, 0 @ control reg bic r4, r4, #2 @ clear frequency change bit - stmia r0, {r4 - r10} @ store cp regs - ldmfd sp!, {r4 - r10, pc} + stmia r0, {r4 - r9} @ store cp regs + ldmfd sp!, {r4 - r9, pc} ENDPROC(cpu_xscale_do_suspend) ENTRY(cpu_xscale_do_resume) - ldmia r0, {r4 - r10} @ load cp regs + ldmia r0, {r4 - r9} @ load cp regs mov ip, #0 mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB @@ -545,13 +544,9 @@ ENTRY(cpu_xscale_do_resume) mcr p15, 0, r5, c15, c1, 0 @ CP access reg mcr p15, 0, r6, c13, c0, 0 @ PID mcr p15, 0, r7, c3, c0, 0 @ domain ID - mcr p15, 0, r8, c2, c0, 0 @ translation table base addr - mcr p15, 0, r9, c1, c1, 0 @ auxiliary control reg - mov r0, r10 @ control register - mov r2, r8, lsr #14 @ get TTB0 base - mov r2, r2, lsl #14 - ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE + mcr p15, 0, r1, c2, c0, 0 @ translation table base addr + mcr p15, 0, r8, c1, c1, 0 @ auxiliary control reg + mov r0, r9 @ control register b cpu_resume_mmu ENDPROC(cpu_xscale_do_resume) #endif diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index e4dde91f023..a3045937fc2 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -54,7 +54,7 @@ #define UART_VADDR IMX_IO_ADDRESS(UART_PADDR) - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =UART_PADDR @ physical ldr \rv, =UART_VADDR @ virtual .endm diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h deleted file mode 100644 index 11be5cdbdd1..00000000000 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_MEMORY_H__ -#define __ASM_ARCH_MXC_MEMORY_H__ - -#define MX1_PHYS_OFFSET UL(0x08000000) -#define MX21_PHYS_OFFSET UL(0xc0000000) -#define MX25_PHYS_OFFSET UL(0x80000000) -#define MX27_PHYS_OFFSET UL(0xa0000000) -#define MX3x_PHYS_OFFSET UL(0x80000000) -#define MX50_PHYS_OFFSET UL(0x70000000) -#define MX51_PHYS_OFFSET UL(0x90000000) -#define MX53_PHYS_OFFSET UL(0x70000000) - -#if !defined(CONFIG_RUNTIME_PHYS_OFFSET) -# if defined CONFIG_ARCH_MX1 -# define PLAT_PHYS_OFFSET MX1_PHYS_OFFSET -# elif defined CONFIG_MACH_MX21 -# define PLAT_PHYS_OFFSET MX21_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX25 -# define PLAT_PHYS_OFFSET MX25_PHYS_OFFSET -# elif defined CONFIG_MACH_MX27 -# define PLAT_PHYS_OFFSET MX27_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX3 -# define PLAT_PHYS_OFFSET MX3x_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX50 -# define PLAT_PHYS_OFFSET MX50_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX51 -# define PLAT_PHYS_OFFSET MX51_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX53 -# define PLAT_PHYS_OFFSET MX53_PHYS_OFFSET -# endif -#endif - -#if defined(CONFIG_MX3_VIDEO) -/* - * Increase size of DMA-consistent memory region. - * This is required for mx3 camera driver to capture at least two QXGA frames. - */ -#define CONSISTENT_DMA_SIZE SZ_8M - -#elif defined(CONFIG_MX1_VIDEO) || defined(CONFIG_VIDEO_MX2_HOSTSUPPORT) -/* - * Increase size of DMA-consistent memory region. - * This is required for i.MX camera driver to capture at least four VGA frames. - */ -#define CONSISTENT_DMA_SIZE SZ_4M -#endif /* CONFIG_MX1_VIDEO || CONFIG_VIDEO_MX2_HOSTSUPPORT */ - -#endif /* __ASM_ARCH_MXC_MEMORY_H__ */ diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index bb8f4a6b3e3..95732af7b20 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -14,6 +14,7 @@ config ARCH_OMAP1 select CLKDEV_LOOKUP select CLKSRC_MMIO select GENERIC_IRQ_CHIP + select NEED_MACH_MEMORY_H help "Systems based on omap7xx, omap15xx or omap16xx" diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h index d72ec85c97e..ebe67ea8d06 100644 --- a/arch/arm/plat-omap/include/plat/io.h +++ b/arch/arm/plat-omap/include/plat/io.h @@ -309,6 +309,8 @@ extern void omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0, void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type); void omap_iounmap(volatile void __iomem *addr); +extern void __init omap_init_consistent_dma_size(void); + #endif #endif diff --git a/arch/arm/plat-omap/include/plat/memory.h b/arch/arm/plat-omap/include/plat/memory.h deleted file mode 100644 index e6720aa2d55..00000000000 --- a/arch/arm/plat-omap/include/plat/memory.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/memory.h - * - * Memory map for OMAP-1510 and 1610 - * - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#if defined(CONFIG_ARCH_OMAP1) -#define PLAT_PHYS_OFFSET UL(0x10000000) -#else -#define PLAT_PHYS_OFFSET UL(0x80000000) -#endif - -/* - * Bus address is physical address, except for OMAP-1510 Local Bus. - * OMAP-1510 bus address is translated into a Local Bus address if the - * OMAP bus type is lbus. We do the address translation based on the - * device overriding the defaults used in the dma-mapping API. - * Note that the is_lbus_device() test is not very efficient on 1510 - * because of the strncmp(). - */ -#ifdef CONFIG_ARCH_OMAP15XX - -/* - * OMAP-1510 Local Bus address offset - */ -#define OMAP1510_LB_OFFSET UL(0x30000000) - -#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET) -#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET) -#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0)) - -#define __arch_pfn_to_dma(dev, pfn) \ - ({ dma_addr_t __dma = __pfn_to_phys(pfn); \ - if (is_lbus_device(dev)) \ - __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \ - __dma; }) - -#define __arch_dma_to_pfn(dev, addr) \ - ({ dma_addr_t __dma = addr; \ - if (is_lbus_device(dev)) \ - __dma += PHYS_OFFSET - OMAP1510_LB_OFFSET; \ - __phys_to_pfn(__dma); \ - }) - -#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \ - lbus_to_virt(addr) : \ - __phys_to_virt(addr)); }) - -#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \ - (dma_addr_t) (is_lbus_device(dev) ? \ - virt_to_lbus(__addr) : \ - __virt_to_phys(__addr)); }) - -#endif /* CONFIG_ARCH_OMAP15XX */ - -/* Override the ARM default */ -#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE - -#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0) -#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE -#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2 -#endif - -#define CONSISTENT_DMA_SIZE \ - (((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024) - -#endif - -#endif - diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index de3b10c1812..1ab9fd6abe6 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -16,8 +16,8 @@ #include <linux/init.h> /* - * Memory entry used for the DEBUG_LL UART configuration. See also - * uncompress.h and debug-macro.S. + * Memory entry used for the DEBUG_LL UART configuration, relative to + * start of RAM. See also uncompress.h and debug-macro.S. * * Note that using a memory location for storing the UART configuration * has at least two limitations: @@ -27,7 +27,7 @@ * 2. We assume printascii is called at least once before paging_init, * and addruart has a chance to read OMAP_UART_INFO */ -#define OMAP_UART_INFO (PLAT_PHYS_OFFSET + 0x3ffc) +#define OMAP_UART_INFO_OFS 0x3ffc /* OMAP1 serial ports */ #define OMAP1_UART1_BASE 0xfffb0000 diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index a067484cc4a..2f472e989ec 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -36,7 +36,13 @@ int uart_shift; */ static void set_omap_uart_info(unsigned char port) { - *(volatile u32 *)OMAP_UART_INFO = port; + /* + * Get address of some.bss variable and round it down + * a la CONFIG_AUTO_ZRELADDR. + */ + u32 ram_start = (u32)&uart_shift & 0xf8000000; + u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS); + *uart_info = port; } static void putc(int c) diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index f1ecfa9fc61..e9b0e23edd0 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <linux/io.h> #include <linux/mm.h> +#include <linux/dma-mapping.h> #include <plat/omap7xx.h> #include <plat/omap1510.h> @@ -139,3 +140,10 @@ void omap_iounmap(volatile void __iomem *addr) __iounmap(addr); } EXPORT_SYMBOL(omap_iounmap); + +void __init omap_init_consistent_dma_size(void) +{ +#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20); +#endif +} diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index 9a6a5385491..02609eee056 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -615,6 +615,9 @@ static int _od_resume_noirq(struct device *dev) return pm_generic_resume_noirq(dev); } +#else +#define _od_suspend_noirq NULL +#define _od_resume_noirq NULL #endif static struct dev_pm_domain omap_device_pm_domain = { diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S index 8501bbf2c09..02b160a1ec9 100644 --- a/arch/arm/plat-spear/include/plat/debug-macro.S +++ b/arch/arm/plat-spear/include/plat/debug-macro.S @@ -14,7 +14,7 @@ #include <linux/amba/serial.h> #include <mach/hardware.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #SPEAR_DBG_UART_BASE @ Physical base mov \rv, #VA_SPEAR_DBG_UART_BASE @ Virtual base .endm diff --git a/arch/arm/plat-spear/include/plat/memory.h b/arch/arm/plat-spear/include/plat/memory.h deleted file mode 100644 index 7e3599e1104..00000000000 --- a/arch/arm/plat-spear/include/plat/memory.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/memory.h - * - * Memory map for SPEAr platform - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_MEMORY_H -#define __PLAT_MEMORY_H - -/* Physical DRAM offset */ -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif /* __PLAT_MEMORY_H */ diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S index 7662f736e42..cf17d04ec30 100644 --- a/arch/arm/plat-tcc/include/mach/debug-macro.S +++ b/arch/arm/plat-tcc/include/mach/debug-macro.S @@ -9,7 +9,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp moveq \rp, #0x90000000 @ physical base address movne \rv, #0xF1000000 @ virtual base orr \rp, \rp, #0x00007000 @ UART0 diff --git a/arch/arm/plat-tcc/include/mach/memory.h b/arch/arm/plat-tcc/include/mach/memory.h deleted file mode 100644 index 28a6e0cd13b..00000000000 --- a/arch/arm/plat-tcc/include/mach/memory.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 RidgeRun, Inc. - * Copyright (C) 2008-2009 Telechips - * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de> - * - * Licensed under the terms of the GPL v2. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x20000000) - -#endif diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 79bcb431693..0cbd5a0a933 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -11,6 +11,7 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/cpu.h> +#include <linux/cpu_pm.h> #include <linux/kernel.h> #include <linux/notifier.h> #include <linux/signal.h> @@ -68,7 +69,7 @@ static bool vfp_state_in_hw(unsigned int cpu, struct thread_info *thread) /* * Force a reload of the VFP context from the thread structure. We do * this by ensuring that access to the VFP hardware is disabled, and - * clear last_VFP_context. Must be called from non-preemptible context. + * clear vfp_current_hw_state. Must be called from non-preemptible context. */ static void vfp_force_reload(unsigned int cpu, struct thread_info *thread) { @@ -436,9 +437,7 @@ static void vfp_enable(void *unused) set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11)); } -#ifdef CONFIG_PM -#include <linux/syscore_ops.h> - +#ifdef CONFIG_CPU_PM static int vfp_pm_suspend(void) { struct thread_info *ti = current_thread_info(); @@ -468,19 +467,33 @@ static void vfp_pm_resume(void) fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); } -static struct syscore_ops vfp_pm_syscore_ops = { - .suspend = vfp_pm_suspend, - .resume = vfp_pm_resume, +static int vfp_cpu_pm_notifier(struct notifier_block *self, unsigned long cmd, + void *v) +{ + switch (cmd) { + case CPU_PM_ENTER: + vfp_pm_suspend(); + break; + case CPU_PM_ENTER_FAILED: + case CPU_PM_EXIT: + vfp_pm_resume(); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block vfp_cpu_pm_notifier_block = { + .notifier_call = vfp_cpu_pm_notifier, }; static void vfp_pm_init(void) { - register_syscore_ops(&vfp_pm_syscore_ops); + cpu_pm_register_notifier(&vfp_cpu_pm_notifier_block); } #else static inline void vfp_pm_init(void) { } -#endif /* CONFIG_PM */ +#endif /* CONFIG_CPU_PM */ /* * Ensure that the VFP state stored in 'thread->vfpstate' is up to date diff --git a/arch/openrisc/include/asm/dma-mapping.h b/arch/openrisc/include/asm/dma-mapping.h index 052f877b52a..60b47223390 100644 --- a/arch/openrisc/include/asm/dma-mapping.h +++ b/arch/openrisc/include/asm/dma-mapping.h @@ -31,7 +31,6 @@ #define DMA_ERROR_CODE (~(dma_addr_t)0x0) -int dma_mapping_error(struct device *dev, dma_addr_t dma_addr); #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) @@ -47,6 +46,12 @@ dma_addr_t or1k_map_page(struct device *dev, struct page *page, void or1k_unmap_page(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction dir, struct dma_attrs *attrs); +int or1k_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir, + struct dma_attrs *attrs); +void or1k_unmap_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir, + struct dma_attrs *attrs); void or1k_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction dir); @@ -98,6 +103,51 @@ static inline void dma_unmap_single(struct device *dev, dma_addr_t addr, debug_dma_unmap_page(dev, addr, size, dir, true); } +static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir) +{ + int i, ents; + struct scatterlist *s; + + for_each_sg(sg, s, nents, i) + kmemcheck_mark_initialized(sg_virt(s), s->length); + BUG_ON(!valid_dma_direction(dir)); + ents = or1k_map_sg(dev, sg, nents, dir, NULL); + debug_dma_map_sg(dev, sg, nents, ents, dir); + + return ents; +} + +static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir) +{ + BUG_ON(!valid_dma_direction(dir)); + debug_dma_unmap_sg(dev, sg, nents, dir); + or1k_unmap_sg(dev, sg, nents, dir, NULL); +} + +static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, + size_t offset, size_t size, + enum dma_data_direction dir) +{ + dma_addr_t addr; + + kmemcheck_mark_initialized(page_address(page) + offset, size); + BUG_ON(!valid_dma_direction(dir)); + addr = or1k_map_page(dev, page, offset, size, dir, NULL); + debug_dma_map_page(dev, page, offset, size, dir, addr, false); + + return addr; +} + +static inline void dma_unmap_page(struct device *dev, dma_addr_t addr, + size_t size, enum dma_data_direction dir) +{ + BUG_ON(!valid_dma_direction(dir)); + or1k_unmap_page(dev, addr, size, dir, NULL); + debug_dma_unmap_page(dev, addr, size, dir, true); +} + static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr, size_t size, enum dma_data_direction dir) @@ -119,7 +169,12 @@ static inline void dma_sync_single_for_device(struct device *dev, static inline int dma_supported(struct device *dev, u64 dma_mask) { /* Support 32 bit DMA mask exclusively */ - return dma_mask == 0xffffffffULL; + return dma_mask == DMA_BIT_MASK(32); +} + +static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return 0; } static inline int dma_set_mask(struct device *dev, u64 dma_mask) diff --git a/arch/openrisc/include/asm/sigcontext.h b/arch/openrisc/include/asm/sigcontext.h index 54a5c50132e..b79c2b19afb 100644 --- a/arch/openrisc/include/asm/sigcontext.h +++ b/arch/openrisc/include/asm/sigcontext.h @@ -23,16 +23,11 @@ /* This struct is saved by setup_frame in signal.c, to keep the current context while a signal handler is executed. It's restored by sys_sigreturn. - - To keep things simple, we use pt_regs here even though normally you just - specify the list of regs to save. Then we can use copy_from_user on the - entire regs instead of a bunch of get_user's as well... */ struct sigcontext { - struct pt_regs regs; /* needs to be first */ + struct user_regs_struct regs; /* needs to be first */ unsigned long oldmask; - unsigned long usp; /* usp before stacking this gunk on it */ }; #endif /* __ASM_OPENRISC_SIGCONTEXT_H */ diff --git a/arch/openrisc/kernel/dma.c b/arch/openrisc/kernel/dma.c index 968d3ee477e..f1c8ee2895d 100644 --- a/arch/openrisc/kernel/dma.c +++ b/arch/openrisc/kernel/dma.c @@ -154,6 +154,33 @@ void or1k_unmap_page(struct device *dev, dma_addr_t dma_handle, /* Nothing special to do here... */ } +int or1k_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir, + struct dma_attrs *attrs) +{ + struct scatterlist *s; + int i; + + for_each_sg(sg, s, nents, i) { + s->dma_address = or1k_map_page(dev, sg_page(s), s->offset, + s->length, dir, NULL); + } + + return nents; +} + +void or1k_unmap_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir, + struct dma_attrs *attrs) +{ + struct scatterlist *s; + int i; + + for_each_sg(sg, s, nents, i) { + or1k_unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir, NULL); + } +} + void or1k_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction dir) @@ -187,5 +214,4 @@ static int __init dma_init(void) return 0; } - fs_initcall(dma_init); diff --git a/arch/openrisc/kernel/signal.c b/arch/openrisc/kernel/signal.c index 5f759c76834..95207ab0c99 100644 --- a/arch/openrisc/kernel/signal.c +++ b/arch/openrisc/kernel/signal.c @@ -52,31 +52,25 @@ struct rt_sigframe { static int restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc) { unsigned int err = 0; - unsigned long old_usp; /* Alwys make any pending restarted system call return -EINTR */ current_thread_info()->restart_block.fn = do_no_restart_syscall; - /* restore the regs from &sc->regs (same as sc, since regs is first) + /* + * Restore the regs from &sc->regs. * (sc is already checked for VERIFY_READ since the sigframe was * checked in sys_sigreturn previously) */ - - if (__copy_from_user(regs, sc, sizeof(struct pt_regs))) + if (__copy_from_user(regs, sc->regs.gpr, 32 * sizeof(unsigned long))) + goto badframe; + if (__copy_from_user(®s->pc, &sc->regs.pc, sizeof(unsigned long))) + goto badframe; + if (__copy_from_user(®s->sr, &sc->regs.sr, sizeof(unsigned long))) goto badframe; /* make sure the SM-bit is cleared so user-mode cannot fool us */ regs->sr &= ~SPR_SR_SM; - /* restore the old USP as it was before we stacked the sc etc. - * (we cannot just pop the sigcontext since we aligned the sp and - * stuff after pushing it) - */ - - err |= __get_user(old_usp, &sc->usp); - - regs->sp = old_usp; - /* TODO: the other ports use regs->orig_XX to disable syscall checks * after this completes, but we don't use that mechanism. maybe we can * use it now ? @@ -137,18 +131,17 @@ static int setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs, unsigned long mask) { int err = 0; - unsigned long usp = regs->sp; - /* copy the regs. they are first in sc so we can use sc directly */ + /* copy the regs */ - err |= __copy_to_user(sc, regs, sizeof(struct pt_regs)); + err |= __copy_to_user(sc->regs.gpr, regs, 32 * sizeof(unsigned long)); + err |= __copy_to_user(&sc->regs.pc, ®s->pc, sizeof(unsigned long)); + err |= __copy_to_user(&sc->regs.sr, ®s->sr, sizeof(unsigned long)); /* then some other stuff */ err |= __put_user(mask, &sc->oldmask); - err |= __put_user(usp, &sc->usp); - return err; } |