diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/mach-at91/at91sam9g45_devices.c | 165 | ||||
| -rw-r--r-- | arch/arm/mach-at91/board-sam9m10g45ek.c | 24 |
2 files changed, 189 insertions, 0 deletions
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 1276babf84d..1e8f275c17f 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -15,6 +15,7 @@ #include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> +#include <linux/atmel-mci.h> #include <linux/fb.h> #include <video/atmel_lcdc.h> @@ -25,6 +26,7 @@ #include <mach/at91sam9g45_matrix.h> #include <mach/at91sam9_smc.h> #include <mach/at_hdmac.h> +#include <mach/atmel-mci.h> #include "generic.h" @@ -350,6 +352,169 @@ void __init at91_add_device_eth(struct at91_eth_data *data) {} /* -------------------------------------------------------------------- + * MMC / SD + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) +static u64 mmc_dmamask = DMA_BIT_MASK(32); +static struct mci_platform_data mmc0_data, mmc1_data; + +static struct resource mmc0_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_MCI0, + .end = AT91SAM9G45_BASE_MCI0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_MCI0, + .end = AT91SAM9G45_ID_MCI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_mmc0_device = { + .name = "atmel_mci", + .id = 0, + .dev = { + .dma_mask = &mmc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &mmc0_data, + }, + .resource = mmc0_resources, + .num_resources = ARRAY_SIZE(mmc0_resources), +}; + +static struct resource mmc1_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_MCI1, + .end = AT91SAM9G45_BASE_MCI1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_MCI1, + .end = AT91SAM9G45_ID_MCI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_mmc1_device = { + .name = "atmel_mci", + .id = 1, + .dev = { + .dma_mask = &mmc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &mmc1_data, + }, + .resource = mmc1_resources, + .num_resources = ARRAY_SIZE(mmc1_resources), +}; + +/* Consider only one slot : slot 0 */ +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) +{ + + if (!data) + return; + + /* Must have at least one usable slot */ + if (!data->slot[0].bus_width) + return; + +#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE) + { + struct at_dma_slave *atslave; + struct mci_dma_data *alt_atslave; + + alt_atslave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL); + atslave = &alt_atslave->sdata; + + /* DMA slave channel configuration */ + atslave->dma_dev = &at_hdmac_device.dev; + atslave->reg_width = AT_DMA_SLAVE_WIDTH_32BIT; + atslave->cfg = ATC_FIFOCFG_HALFFIFO + | ATC_SRC_H2SEL_HW | ATC_DST_H2SEL_HW; + atslave->ctrla = ATC_SCSIZE_16 | ATC_DCSIZE_16; + if (mmc_id == 0) /* MCI0 */ + atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI0) + | ATC_DST_PER(AT_DMA_ID_MCI0); + + else /* MCI1 */ + atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI1) + | ATC_DST_PER(AT_DMA_ID_MCI1); + + data->dma_slave = alt_atslave; + } +#endif + + + /* input/irq */ + if (data->slot[0].detect_pin) { + at91_set_gpio_input(data->slot[0].detect_pin, 1); + at91_set_deglitch(data->slot[0].detect_pin, 1); + } + if (data->slot[0].wp_pin) + at91_set_gpio_input(data->slot[0].wp_pin, 1); + + if (mmc_id == 0) { /* MCI0 */ + + /* CLK */ + at91_set_A_periph(AT91_PIN_PA0, 0); + + /* CMD */ + at91_set_A_periph(AT91_PIN_PA1, 1); + + /* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */ + at91_set_A_periph(AT91_PIN_PA2, 1); + if (data->slot[0].bus_width == 4) { + at91_set_A_periph(AT91_PIN_PA3, 1); + at91_set_A_periph(AT91_PIN_PA4, 1); + at91_set_A_periph(AT91_PIN_PA5, 1); + if (data->slot[0].bus_width == 8) { + at91_set_A_periph(AT91_PIN_PA6, 1); + at91_set_A_periph(AT91_PIN_PA7, 1); + at91_set_A_periph(AT91_PIN_PA8, 1); + at91_set_A_periph(AT91_PIN_PA9, 1); + } + } + + mmc0_data = *data; + at91_clock_associate("mci0_clk", &at91sam9g45_mmc0_device.dev, "mci_clk"); + platform_device_register(&at91sam9g45_mmc0_device); + + } else { /* MCI1 */ + + /* CLK */ + at91_set_A_periph(AT91_PIN_PA31, 0); + + /* CMD */ + at91_set_A_periph(AT91_PIN_PA22, 1); + + /* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */ + at91_set_A_periph(AT91_PIN_PA23, 1); + if (data->slot[0].bus_width == 4) { + at91_set_A_periph(AT91_PIN_PA24, 1); + at91_set_A_periph(AT91_PIN_PA25, 1); + at91_set_A_periph(AT91_PIN_PA26, 1); + if (data->slot[0].bus_width == 8) { + at91_set_A_periph(AT91_PIN_PA27, 1); + at91_set_A_periph(AT91_PIN_PA28, 1); + at91_set_A_periph(AT91_PIN_PA29, 1); + at91_set_A_periph(AT91_PIN_PA30, 1); + } + } + + mmc1_data = *data; + at91_clock_associate("mci1_clk", &at91sam9g45_mmc1_device.dev, "mci_clk"); + platform_device_register(&at91sam9g45_mmc1_device); + + } +} +#else +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} +#endif + + +/* -------------------------------------------------------------------- * NAND / SmartMedia * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 7913984f6de..86ff4b52db3 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -24,7 +24,9 @@ #include <linux/input.h> #include <linux/leds.h> #include <linux/clk.h> +#include <linux/atmel-mci.h> +#include <mach/hardware.h> #include <video/atmel_lcdc.h> #include <asm/setup.h> @@ -98,6 +100,25 @@ static struct spi_board_info ek_spi_devices[] = { /* + * MCI (SD/MMC) + */ +static struct mci_platform_data __initdata mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PD10, + }, +}; + +static struct mci_platform_data __initdata mci1_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PD11, + .wp_pin = AT91_PIN_PD29, + }, +}; + + +/* * MACB Ethernet device */ static struct at91_eth_data __initdata ek_macb_data = { @@ -380,6 +401,9 @@ static void __init ek_board_init(void) at91_add_device_usba(&ek_usba_udc_data); /* SPI */ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); + /* MMC */ + at91_add_device_mci(0, &mci0_data); + at91_add_device_mci(1, &mci1_data); /* Ethernet */ at91_add_device_eth(&ek_macb_data); /* NAND */ |