diff options
Diffstat (limited to 'arch')
175 files changed, 1969 insertions, 2531 deletions
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index d5b9b5e645c..9944dedee5b 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -18,6 +18,8 @@ config ALPHA select ARCH_HAVE_NMI_SAFE_CMPXCHG select GENERIC_SMP_IDLE_THREAD select GENERIC_CMOS_UPDATE + select GENERIC_STRNCPY_FROM_USER + select GENERIC_STRNLEN_USER help The Alpha is a 64-bit general-purpose processor designed and marketed by the Digital Equipment Corporation of blessed memory, diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h index 3bb7ffeae3b..c2cbe4fc391 100644 --- a/arch/alpha/include/asm/atomic.h +++ b/arch/alpha/include/asm/atomic.h @@ -14,8 +14,8 @@ */ -#define ATOMIC_INIT(i) ( (atomic_t) { (i) } ) -#define ATOMIC64_INIT(i) ( (atomic64_t) { (i) } ) +#define ATOMIC_INIT(i) { (i) } +#define ATOMIC64_INIT(i) { (i) } #define atomic_read(v) (*(volatile int *)&(v)->counter) #define atomic64_read(v) (*(volatile long *)&(v)->counter) diff --git a/arch/alpha/include/asm/fpu.h b/arch/alpha/include/asm/fpu.h index db00f7885fa..e477bcd5b94 100644 --- a/arch/alpha/include/asm/fpu.h +++ b/arch/alpha/include/asm/fpu.h @@ -1,7 +1,9 @@ #ifndef __ASM_ALPHA_FPU_H #define __ASM_ALPHA_FPU_H +#ifdef __KERNEL__ #include <asm/special_insns.h> +#endif /* * Alpha floating-point control register defines: diff --git a/arch/alpha/include/asm/ptrace.h b/arch/alpha/include/asm/ptrace.h index fd698a174f2..b87755a1955 100644 --- a/arch/alpha/include/asm/ptrace.h +++ b/arch/alpha/include/asm/ptrace.h @@ -76,7 +76,10 @@ struct switch_stack { #define task_pt_regs(task) \ ((struct pt_regs *) (task_stack_page(task) + 2*PAGE_SIZE) - 1) -#define force_successful_syscall_return() (task_pt_regs(current)->r0 = 0) +#define current_pt_regs() \ + ((struct pt_regs *) ((char *)current_thread_info() + 2*PAGE_SIZE) - 1) + +#define force_successful_syscall_return() (current_pt_regs()->r0 = 0) #endif diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h index dcb221a4b5b..7d2f75be932 100644 --- a/arch/alpha/include/asm/socket.h +++ b/arch/alpha/include/asm/socket.h @@ -76,9 +76,11 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 43 +#ifdef __KERNEL__ /* O_NONBLOCK clashes with the bits used for socket types. Therefore we * have to define SOCK_NONBLOCK to a different value here. */ #define SOCK_NONBLOCK 0x40000000 +#endif /* __KERNEL__ */ #endif /* _ASM_SOCKET_H */ diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h index b49ec2f8d6e..766fdfde2b7 100644 --- a/arch/alpha/include/asm/uaccess.h +++ b/arch/alpha/include/asm/uaccess.h @@ -433,36 +433,12 @@ clear_user(void __user *to, long len) #undef __module_address #undef __module_call -/* Returns: -EFAULT if exception before terminator, N if the entire - buffer filled, else strlen. */ +#define user_addr_max() \ + (segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL) -extern long __strncpy_from_user(char *__to, const char __user *__from, long __to_len); - -extern inline long -strncpy_from_user(char *to, const char __user *from, long n) -{ - long ret = -EFAULT; - if (__access_ok((unsigned long)from, 0, get_fs())) - ret = __strncpy_from_user(to, from, n); - return ret; -} - -/* Returns: 0 if bad, string length+1 (memory size) of string if ok */ -extern long __strlen_user(const char __user *); - -extern inline long strlen_user(const char __user *str) -{ - return access_ok(VERIFY_READ,str,0) ? __strlen_user(str) : 0; -} - -/* Returns: 0 if exception before NUL or reaching the supplied limit (N), - * a value greater than N if the limit would be exceeded, else strlen. */ -extern long __strnlen_user(const char __user *, long); - -extern inline long strnlen_user(const char __user *str, long n) -{ - return access_ok(VERIFY_READ,str,0) ? __strnlen_user(str, n) : 0; -} +extern long strncpy_from_user(char *dest, const char __user *src, long count); +extern __must_check long strlen_user(const char __user *str); +extern __must_check long strnlen_user(const char __user *str, long n); /* * About the exception table: diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h index 633b23b0664..a31a78eac9b 100644 --- a/arch/alpha/include/asm/unistd.h +++ b/arch/alpha/include/asm/unistd.h @@ -465,10 +465,12 @@ #define __NR_setns 501 #define __NR_accept4 502 #define __NR_sendmmsg 503 +#define __NR_process_vm_readv 504 +#define __NR_process_vm_writev 505 #ifdef __KERNEL__ -#define NR_SYSCALLS 504 +#define NR_SYSCALLS 506 #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_STAT64 diff --git a/arch/alpha/include/asm/word-at-a-time.h b/arch/alpha/include/asm/word-at-a-time.h new file mode 100644 index 00000000000..6b340d0f152 --- /dev/null +++ b/arch/alpha/include/asm/word-at-a-time.h @@ -0,0 +1,55 @@ +#ifndef _ASM_WORD_AT_A_TIME_H +#define _ASM_WORD_AT_A_TIME_H + +#include <asm/compiler.h> + +/* + * word-at-a-time interface for Alpha. + */ + +/* + * We do not use the word_at_a_time struct on Alpha, but it needs to be + * implemented to humour the generic code. + */ +struct word_at_a_time { + const unsigned long unused; +}; + +#define WORD_AT_A_TIME_CONSTANTS { 0 } + +/* Return nonzero if val has a zero */ +static inline unsigned long has_zero(unsigned long val, unsigned long *bits, const struct word_at_a_time *c) +{ + unsigned long zero_locations = __kernel_cmpbge(0, val); + *bits = zero_locations; + return zero_locations; +} + +static inline unsigned long prep_zero_mask(unsigned long val, unsigned long bits, const struct word_at_a_time *c) +{ + return bits; +} + +#define create_zero_mask(bits) (bits) + +static inline unsigned long find_zero(unsigned long bits) +{ +#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67) + /* Simple if have CIX instructions */ + return __kernel_cttz(bits); +#else + unsigned long t1, t2, t3; + /* Retain lowest set bit only */ + bits &= -bits; + /* Binary search for lowest set bit */ + t1 = bits & 0xf0; + t2 = bits & 0xcc; + t3 = bits & 0xaa; + if (t1) t1 = 4; + if (t2) t2 = 2; + if (t3) t3 = 1; + return t1 + t2 + t3; +#endif +} + +#endif /* _ASM_WORD_AT_A_TIME_H */ diff --git a/arch/alpha/kernel/alpha_ksyms.c b/arch/alpha/kernel/alpha_ksyms.c index d96e742d4dc..15fa821d09c 100644 --- a/arch/alpha/kernel/alpha_ksyms.c +++ b/arch/alpha/kernel/alpha_ksyms.c @@ -52,7 +52,6 @@ EXPORT_SYMBOL(alpha_write_fp_reg_s); /* entry.S */ EXPORT_SYMBOL(kernel_thread); -EXPORT_SYMBOL(kernel_execve); /* Networking helper routines. */ EXPORT_SYMBOL(csum_tcpudp_magic); @@ -74,8 +73,6 @@ EXPORT_SYMBOL(alpha_fp_emul); */ EXPORT_SYMBOL(__copy_user); EXPORT_SYMBOL(__do_clear_user); -EXPORT_SYMBOL(__strncpy_from_user); -EXPORT_SYMBOL(__strnlen_user); /* * SMP-specific symbols. diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S index 6d159cee5f2..ec0da0567ab 100644 --- a/arch/alpha/kernel/entry.S +++ b/arch/alpha/kernel/entry.S @@ -663,58 +663,6 @@ kernel_thread: br ret_to_kernel .end kernel_thread -/* - * kernel_execve(path, argv, envp) - */ - .align 4 - .globl kernel_execve - .ent kernel_execve -kernel_execve: - /* We can be called from a module. */ - ldgp $gp, 0($27) - lda $sp, -(32+SIZEOF_PT_REGS+8)($sp) - .frame $sp, 32+SIZEOF_PT_REGS+8, $26, 0 - stq $26, 0($sp) - stq $16, 8($sp) - stq $17, 16($sp) - stq $18, 24($sp) - .prologue 1 - - lda $16, 32($sp) - lda $17, 0 - lda $18, SIZEOF_PT_REGS - bsr $26, memset !samegp - - /* Avoid the HAE being gratuitously wrong, which would cause us - to do the whole turn off interrupts thing and restore it. */ - ldq $2, alpha_mv+HAE_CACHE - stq $2, 152+32($sp) - - ldq $16, 8($sp) - ldq $17, 16($sp) - ldq $18, 24($sp) - lda $19, 32($sp) - bsr $26, do_execve !samegp - - ldq $26, 0($sp) - bne $0, 1f /* error! */ - - /* Move the temporary pt_regs struct from its current location - to the top of the kernel stack frame. See copy_thread for - details for a normal process. */ - lda $16, 0x4000 - SIZEOF_PT_REGS($8) - lda $17, 32($sp) - lda $18, SIZEOF_PT_REGS - bsr $26, memmove !samegp - - /* Take that over as our new stack frame and visit userland! */ - lda $sp, 0x4000 - SIZEOF_PT_REGS($8) - br $31, ret_from_sys_call - -1: lda $sp, 32+SIZEOF_PT_REGS+8($sp) - ret -.end kernel_execve - /* * Special system calls. Most of these are special in that they either @@ -797,115 +745,6 @@ sys_rt_sigreturn: .end sys_rt_sigreturn .align 4 - .globl sys_sethae - .ent sys_sethae -sys_sethae: - .prologue 0 - stq $16, 152($sp) - ret -.end sys_sethae - - .align 4 - .globl osf_getpriority - .ent osf_getpriority -osf_getpriority: - lda $sp, -16($sp) - stq $26, 0($sp) - .prologue 0 - - jsr $26, sys_getpriority - - ldq $26, 0($sp) - blt $0, 1f - - /* Return value is the unbiased priority, i.e. 20 - prio. - This does result in negative return values, so signal - no error by writing into the R0 slot. */ - lda $1, 20 - stq $31, 16($sp) - subl $1, $0, $0 - unop - -1: lda $sp, 16($sp) - ret -.end osf_getpriority - - .align 4 - .globl sys_getxuid - .ent sys_getxuid -sys_getxuid: - .prologue 0 - ldq $2, TI_TASK($8) - ldq $3, TASK_CRED($2) - ldl $0, CRED_UID($3) - ldl $1, CRED_EUID($3) - stq $1, 80($sp) - ret -.end sys_getxuid - - .align 4 - .globl sys_getxgid - .ent sys_getxgid -sys_getxgid: - .prologue 0 - ldq $2, TI_TASK($8) - ldq $3, TASK_CRED($2) - ldl $0, CRED_GID($3) - ldl $1, CRED_EGID($3) - stq $1, 80($sp) - ret -.end sys_getxgid - - .align 4 - .globl sys_getxpid - .ent sys_getxpid -sys_getxpid: - .prologue 0 - ldq $2, TI_TASK($8) - - /* See linux/kernel/timer.c sys_getppid for discussion - about this loop. */ - ldq $3, TASK_GROUP_LEADER($2) - ldq $4, TASK_REAL_PARENT($3) - ldl $0, TASK_TGID($2) -1: ldl $1, TASK_TGID($4) -#ifdef CONFIG_SMP - mov $4, $5 - mb - ldq $3, TASK_GROUP_LEADER($2) - ldq $4, TASK_REAL_PARENT($3) - cmpeq $4, $5, $5 - beq $5, 1b -#endif - stq $1, 80($sp) - ret -.end sys_getxpid - - .align 4 - .globl sys_alpha_pipe - .ent sys_alpha_pipe -sys_alpha_pipe: - lda $sp, -16($sp) - stq $26, 0($sp) - .prologue 0 - - mov $31, $17 - lda $16, 8($sp) - jsr $26, do_pipe_flags - - ldq $26, 0($sp) - bne $0, 1f - - /* The return values are in $0 and $20. */ - ldl $1, 12($sp) - ldl $0, 8($sp) - - stq $1, 80+16($sp) -1: lda $sp, 16($sp) - ret -.end sys_alpha_pipe - - .align 4 .globl sys_execve .ent sys_execve sys_execve: diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 98a103621af..bc1acdda7a5 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -1404,3 +1404,52 @@ SYSCALL_DEFINE3(osf_writev, unsigned long, fd, } #endif + +SYSCALL_DEFINE2(osf_getpriority, int, which, int, who) +{ + int prio = sys_getpriority(which, who); + if (prio >= 0) { + /* Return value is the unbiased priority, i.e. 20 - prio. + This does result in negative return values, so signal + no error */ + force_successful_syscall_return(); + prio = 20 - prio; + } + return prio; +} + +SYSCALL_DEFINE0(getxuid) +{ + current_pt_regs()->r20 = sys_geteuid(); + return sys_getuid(); +} + +SYSCALL_DEFINE0(getxgid) +{ + current_pt_regs()->r20 = sys_getegid(); + return sys_getgid(); +} + +SYSCALL_DEFINE0(getxpid) +{ + current_pt_regs()->r20 = sys_getppid(); + return sys_getpid(); +} + +SYSCALL_DEFINE0(alpha_pipe) +{ + int fd[2]; + int res = do_pipe_flags(fd, 0); + if (!res) { + /* The return values are in $0 and $20. */ + current_pt_regs()->r20 = fd[1]; + res = fd[0]; + } + return res; +} + +SYSCALL_DEFINE1(sethae, unsigned long, val) +{ + current_pt_regs()->hae = val; + return 0; +} diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c index 153d3fce3e8..d6fde98b74b 100644 --- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -455,3 +455,22 @@ get_wchan(struct task_struct *p) } return pc; } + +int kernel_execve(const char *path, const char *const argv[], const char *const envp[]) +{ + /* Avoid the HAE being gratuitously wrong, which would cause us + to do the whole turn off interrupts thing and restore it. */ + struct pt_regs regs = {.hae = alpha_mv.hae_cache}; + int err = do_execve(path, argv, envp, ®s); + if (!err) { + struct pt_regs *p = current_pt_regs(); + /* copy regs to normal position and off to userland we go... */ + *p = regs; + __asm__ __volatile__ ( + "mov %0, $sp;" + "br $31, ret_from_sys_call" + : : "r"(p)); + } + return err; +} +EXPORT_SYMBOL(kernel_execve); diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index 87835235f11..2ac6b45c3e0 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -111,7 +111,7 @@ sys_call_table: .quad sys_socket .quad sys_connect .quad sys_accept - .quad osf_getpriority /* 100 */ + .quad sys_osf_getpriority /* 100 */ .quad sys_send .quad sys_recv .quad sys_sigreturn @@ -522,6 +522,8 @@ sys_call_table: .quad sys_setns .quad sys_accept4 .quad sys_sendmmsg + .quad sys_process_vm_readv + .quad sys_process_vm_writev /* 505 */ .size sys_call_table, . - sys_call_table .type sys_call_table, @object diff --git a/arch/alpha/lib/Makefile b/arch/alpha/lib/Makefile index c0a83ab62b7..59660743237 100644 --- a/arch/alpha/lib/Makefile +++ b/arch/alpha/lib/Makefile @@ -31,8 +31,6 @@ lib-y = __divqu.o __remqu.o __divlu.o __remlu.o \ $(ev6-y)memchr.o \ $(ev6-y)copy_user.o \ $(ev6-y)clear_user.o \ - $(ev6-y)strncpy_from_user.o \ - $(ev67-y)strlen_user.o \ $(ev6-y)csum_ipv6_magic.o \ $(ev6-y)clear_page.o \ $(ev6-y)copy_page.o \ diff --git a/arch/alpha/lib/ev6-strncpy_from_user.S b/arch/alpha/lib/ev6-strncpy_from_user.S deleted file mode 100644 index d2e28178cac..00000000000 --- a/arch/alpha/lib/ev6-strncpy_from_user.S +++ /dev/null @@ -1,424 +0,0 @@ -/* - * arch/alpha/lib/ev6-strncpy_from_user.S - * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com> - * - * Just like strncpy except in the return value: - * - * -EFAULT if an exception occurs before the terminator is copied. - * N if the buffer filled. - * - * Otherwise the length of the string is returned. - * - * Much of the information about 21264 scheduling/coding comes from: - * Compiler Writer's Guide for the Alpha 21264 - * abbreviated as 'CWG' in other comments here - * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html - * Scheduling notation: - * E - either cluster - * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 - * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 - * A bunch of instructions got moved and temp registers were changed - * to aid in scheduling. Control flow was also re-arranged to eliminate - * branches, and to provide longer code sequences to enable better scheduling. - * A total rewrite (using byte load/stores for start & tail sequences) - * is desirable, but very difficult to do without a from-scratch rewrite. - * Save that for the future. - */ - - -#include <asm/errno.h> -#include <asm/regdef.h> - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda $31, $exception-99b($0); \ - .previous - - - .set noat - .set noreorder - .text - - .globl __strncpy_from_user - .ent __strncpy_from_user - .frame $30, 0, $26 - .prologue 0 - - .align 4 -__strncpy_from_user: - and a0, 7, t3 # E : find dest misalignment - beq a2, $zerolength # U : - - /* Are source and destination co-aligned? */ - mov a0, v0 # E : save the string start - xor a0, a1, t4 # E : - EX( ldq_u t1, 0(a1) ) # L : Latency=3 load first quadword - ldq_u t0, 0(a0) # L : load first (partial) aligned dest quadword - - addq a2, t3, a2 # E : bias count by dest misalignment - subq a2, 1, a3 # E : - addq zero, 1, t10 # E : - and t4, 7, t4 # E : misalignment between the two - - and a3, 7, t6 # E : number of tail bytes - sll t10, t6, t10 # E : t10 = bitmask of last count byte - bne t4, $unaligned # U : - lda t2, -1 # E : build a mask against false zero - - /* - * We are co-aligned; take care of a partial first word. - * On entry to this basic block: - * t0 == the first destination word for masking back in - * t1 == the first source word. - */ - - srl a3, 3, a2 # E : a2 = loop counter = (count - 1)/8 - addq a1, 8, a1 # E : - mskqh t2, a1, t2 # U : detection in the src word - nop - - /* Create the 1st output word and detect 0's in the 1st input word. */ - mskqh t1, a1, t3 # U : - mskql t0, a1, t0 # U : assemble the first output word - ornot t1, t2, t2 # E : - nop - - cmpbge zero, t2, t8 # E : bits set iff null found - or t0, t3, t0 # E : - beq a2, $a_eoc # U : - bne t8, $a_eos # U : 2nd branch in a quad. Bad. - - /* On entry to this basic block: - * t0 == a source quad not containing a null. - * a0 - current aligned destination address - * a1 - current aligned source address - * a2 - count of quadwords to move. - * NOTE: Loop improvement - unrolling this is going to be - * a huge win, since we're going to stall otherwise. - * Fix this later. For _really_ large copies, look - * at using wh64 on a look-ahead basis. See the code - * in clear_user.S and copy_user.S. - * Presumably, since (a0) and (a1) do not overlap (by C definition) - * Lots of nops here: - * - Separate loads from stores - * - Keep it to 1 branch/quadpack so the branch predictor - * can train. - */ -$a_loop: - stq_u t0, 0(a0) # L : - addq a0, 8, a0 # E : - nop - subq a2, 1, a2 # E : - - EX( ldq_u t0, 0(a1) ) # L : - addq a1, 8, a1 # E : - cmpbge zero, t0, t8 # E : Stall 2 cycles on t0 - beq a2, $a_eoc # U : - - beq t8, $a_loop # U : - nop - nop - nop - - /* Take care of the final (partial) word store. At this point - * the end-of-count bit is set in t8 iff it applies. - * - * On entry to this basic block we have: - * t0 == the source word containing the null - * t8 == the cmpbge mask that found it. - */ -$a_eos: - negq t8, t12 # E : find low bit set - and t8, t12, t12 # E : - - /* We're doing a partial word store and so need to combine - our source and original destination words. */ - ldq_u t1, 0(a0) # L : - subq t12, 1, t6 # E : - - or t12, t6, t8 # E : - zapnot t0, t8, t0 # U : clear src bytes > null - zap t1, t8, t1 # U : clear dst bytes <= null - or t0, t1, t0 # E : - - stq_u t0, 0(a0) # L : - br $finish_up # L0 : - nop - nop - - /* Add the end-of-count bit to the eos detection bitmask. */ - .align 4 -$a_eoc: - or t10, t8, t8 - br $a_eos - nop - nop - - -/* The source and destination are not co-aligned. Align the destination - and cope. We have to be very careful about not reading too much and - causing a SEGV. */ - - .align 4 -$u_head: - /* We know just enough now to be able to assemble the first - full source word. We can still find a zero at the end of it - that prevents us from outputting the whole thing. - - On entry to this basic block: - t0 == the first dest word, unmasked - t1 == the shifted low bits of the first source word - t6 == bytemask that is -1 in dest word bytes */ - - EX( ldq_u t2, 8(a1) ) # L : load second src word - addq a1, 8, a1 # E : - mskql t0, a0, t0 # U : mask trailing garbage in dst - extqh t2, a1, t4 # U : - - or t1, t4, t1 # E : first aligned src word complete - mskqh t1, a0, t1 # U : mask leading garbage in src - or t0, t1, t0 # E : first output word complete - or t0, t6, t6 # E : mask original data for zero test - - cmpbge zero, t6, t8 # E : - beq a2, $u_eocfin # U : - bne t8, $u_final # U : bad news - 2nd branch in a quad - lda t6, -1 # E : mask out the bits we have - - mskql t6, a1, t6 # U : already seen - stq_u t0, 0(a0) # L : store first output word - or t6, t2, t2 # E : - cmpbge zero, t2, t8 # E : find nulls in second partial - - addq a0, 8, a0 # E : - subq a2, 1, a2 # E : - bne t8, $u_late_head_exit # U : - nop - - /* Finally, we've got all the stupid leading edge cases taken care - of and we can set up to enter the main loop. */ - - extql t2, a1, t1 # U : position hi-bits of lo word - EX( ldq_u t2, 8(a1) ) # L : read next high-order source word - addq a1, 8, a1 # E : - cmpbge zero, t2, t8 # E : - - beq a2, $u_eoc # U : - bne t8, $u_eos # U : - nop - nop - - /* Unaligned copy main loop. In order to avoid reading too much, - the loop is structured to detect zeros in aligned source words. - This has, unfortunately, effectively pulled half of a loop - iteration out into the head and half into the tail, but it does - prevent nastiness from accumulating in the very thing we want - to run as fast as possible. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word - - We further know that t2 does not contain a null terminator. */ - - /* - * Extra nops here: - * separate load quads from store quads - * only one branch/quad to permit predictor training - */ - - .align 4 -$u_loop: - extqh t2, a1, t0 # U : extract high bits for current word - addq a1, 8, a1 # E : - extql t2, a1, t3 # U : extract low bits for next time - addq a0, 8, a0 # E : - - or t0, t1, t0 # E : current dst word now complete - EX( ldq_u t2, 0(a1) ) # L : load high word for next time - subq a2, 1, a2 # E : - nop - - stq_u t0, -8(a0) # L : save the current word - mov t3, t1 # E : - cmpbge zero, t2, t8 # E : test new word for eos - beq a2, $u_eoc # U : - - beq t8, $u_loop # U : - nop - nop - nop - - /* We've found a zero somewhere in the source word we just read. - If it resides in the lower half, we have one (probably partial) - word to write out, and if it resides in the upper half, we - have one full and one partial word left to write out. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word. */ - .align 4 -$u_eos: - extqh t2, a1, t0 # U : - or t0, t1, t0 # E : first (partial) source word complete - cmpbge zero, t0, t8 # E : is the null in this first bit? - nop - - bne t8, $u_final # U : - stq_u t0, 0(a0) # L : the null was in the high-order bits - addq a0, 8, a0 # E : - subq a2, 1, a2 # E : - - .align 4 -$u_late_head_exit: - extql t2, a1, t0 # U : - cmpbge zero, t0, t8 # E : - or t8, t10, t6 # E : - cmoveq a2, t6, t8 # E : - - /* Take care of a final (probably partial) result word. - On entry to this basic block: - t0 == assembled source word - t8 == cmpbge mask that found the null. */ - .align 4 -$u_final: - negq t8, t6 # E : isolate low bit set - and t6, t8, t12 # E : - ldq_u t1, 0(a0) # L : - subq t12, 1, t6 # E : - - or t6, t12, t8 # E : - zapnot t0, t8, t0 # U : kill source bytes > null - zap t1, t8, t1 # U : kill dest bytes <= null - or t0, t1, t0 # E : - - stq_u t0, 0(a0) # E : - br $finish_up # U : - nop - nop - - .align 4 -$u_eoc: # end-of-count - extqh t2, a1, t0 # U : - or t0, t1, t0 # E : - cmpbge zero, t0, t8 # E : - nop - - .align 4 -$u_eocfin: # end-of-count, final word - or t10, t8, t8 # E : - br $u_final # U : - nop - nop - - /* Unaligned copy entry point. */ - .align 4 -$unaligned: - - srl a3, 3, a2 # U : a2 = loop counter = (count - 1)/8 - and a0, 7, t4 # E : find dest misalignment - and a1, 7, t5 # E : find src misalignment - mov zero, t0 # E : - - /* Conditionally load the first destination word and a bytemask - with 0xff indicating that the destination byte is sacrosanct. */ - - mov zero, t6 # E : - beq t4, 1f # U : - ldq_u t0, 0(a0) # L : - lda t6, -1 # E : - - mskql t6, a0, t6 # E : - nop - nop - nop - - .align 4 -1: - subq a1, t4, a1 # E : sub dest misalignment from src addr - /* If source misalignment is larger than dest misalignment, we need - extra startup checks to avoid SEGV. */ - cmplt t4, t5, t12 # E : - extql t1, a1, t1 # U : shift src into place - lda t2, -1 # E : for creating masks later - - beq t12, $u_head # U : - mskqh t2, t5, t2 # U : begin src byte validity mask - cmpbge zero, t1, t8 # E : is there a zero? - nop - - extql t2, a1, t2 # U : - or t8, t10, t5 # E : test for end-of-count too - cmpbge zero, t2, t3 # E : - cmoveq a2, t5, t8 # E : Latency=2, extra map slot - - nop # E : goes with cmov - andnot t8, t3, t8 # E : - beq t8, $u_head # U : - nop - - /* At this point we've found a zero in the first partial word of - the source. We need to isolate the valid source data and mask - it into the original destination data. (Incidentally, we know - that we'll need at least one byte of that original dest word.) */ - - ldq_u t0, 0(a0) # L : - negq t8, t6 # E : build bitmask of bytes <= zero - mskqh t1, t4, t1 # U : - and t6, t8, t12 # E : - - subq t12, 1, t6 # E : - or t6, t12, t8 # E : - zapnot t2, t8, t2 # U : prepare source word; mirror changes - zapnot t1, t8, t1 # U : to source validity mask - - andnot t0, t2, t0 # E : zero place for source to reside - or t0, t1, t0 # E : and put it there - stq_u t0, 0(a0) # L : - nop - - .align 4 -$finish_up: - zapnot t0, t12, t4 # U : was last byte written null? - and t12, 0xf0, t3 # E : binary search for the address of the - cmovne t4, 1, t4 # E : Latency=2, extra map slot - nop # E : with cmovne - - and t12, 0xcc, t2 # E : last byte written - and t12, 0xaa, t1 # E : - cmovne t3, 4, t3 # E : Latency=2, extra map slot - nop # E : with cmovne - - bic a0, 7, t0 - cmovne t2, 2, t2 # E : Latency=2, extra map slot - nop # E : with cmovne - nop - - cmovne t1, 1, t1 # E : Latency=2, extra map slot - nop # E : with cmovne - addq t0, t3, t0 # E : - addq t1, t2, t1 # E : - - addq t0, t1, t0 # E : - addq t0, t4, t0 # add one if we filled the buffer - subq t0, v0, v0 # find string length - ret # L0 : - - .align 4 -$zerolength: - nop - nop - nop - clr v0 - -$exception: - nop - nop - nop - ret - - .end __strncpy_from_user diff --git a/arch/alpha/lib/ev67-strlen_user.S b/arch/alpha/lib/ev67-strlen_user.S deleted file mode 100644 index 57e0d77b81a..00000000000 --- a/arch/alpha/lib/ev67-strlen_user.S +++ /dev/null @@ -1,107 +0,0 @@ -/* - * arch/alpha/lib/ev67-strlen_user.S - * 21264 version contributed by Rick Gorton <rick.gorton@api-networks.com> - * - * Return the length of the string including the NULL terminator - * (strlen+1) or zero if an error occurred. - * - * In places where it is critical to limit the processing time, - * and the data is not trusted, strnlen_user() should be used. - * It will return a value greater than its second argument if - * that limit would be exceeded. This implementation is allowed - * to access memory beyond the limit, but will not cross a page - * boundary when doing so. - * - * Much of the information about 21264 scheduling/coding comes from: - * Compiler Writer's Guide for the Alpha 21264 - * abbreviated as 'CWG' in other comments here - * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html - * Scheduling notation: - * E - either cluster - * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 - * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 - * Try not to change the actual algorithm if possible for consistency. - */ - -#include <asm/regdef.h> - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda v0, $exception-99b(zero); \ - .previous - - - .set noreorder - .set noat - .text - - .globl __strlen_user - .ent __strlen_user - .frame sp, 0, ra - - .align 4 -__strlen_user: - ldah a1, 32767(zero) # do not use plain strlen_user() for strings - # that might be almost 2 GB long; you should - # be using strnlen_user() instead - nop - nop - nop - - .globl __strnlen_user - - .align 4 -__strnlen_user: - .prologue 0 - EX( ldq_u t0, 0(a0) ) # L : load first quadword (a0 may be misaligned) - lda t1, -1(zero) # E : - - insqh t1, a0, t1 # U : - andnot a0, 7, v0 # E : - or t1, t0, t0 # E : - subq a0, 1, a0 # E : get our +1 for the return - - cmpbge zero, t0, t1 # E : t1 <- bitmask: bit i == 1 <==> i-th byte == 0 - subq a1, 7, t2 # E : - subq a0, v0, t0 # E : - bne t1, $found # U : - - addq t2, t0, t2 # E : - addq a1, 1, a1 # E : - nop # E : - nop # E : - - .align 4 -$loop: ble t2, $limit # U : - EX( ldq t0, 8(v0) ) # L : - nop # E : - nop # E : - - cmpbge zero, t0, t1 # E : - subq t2, 8, t2 # E : - addq v0, 8, v0 # E : addr += 8 - beq t1, $loop # U : - -$found: cttz t1, t2 # U0 : - addq v0, t2, v0 # E : - subq v0, a0, v0 # E : - ret # L0 : - -$exception: - nop - nop - nop - ret - - .align 4 # currently redundant -$limit: - nop - nop - subq a1, t2, v0 - ret - - .end __strlen_user diff --git a/arch/alpha/lib/strlen_user.S b/arch/alpha/lib/strlen_user.S deleted file mode 100644 index 508a18e9647..00000000000 --- a/arch/alpha/lib/strlen_user.S +++ /dev/null @@ -1,91 +0,0 @@ -/* - * arch/alpha/lib/strlen_user.S - * - * Return the length of the string including the NUL terminator - * (strlen+1) or zero if an error occurred. - * - * In places where it is critical to limit the processing time, - * and the data is not trusted, strnlen_user() should be used. - * It will return a value greater than its second argument if - * that limit would be exceeded. This implementation is allowed - * to access memory beyond the limit, but will not cross a page - * boundary when doing so. - */ - -#include <asm/regdef.h> - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda v0, $exception-99b(zero); \ - .previous - - - .set noreorder - .set noat - .text - - .globl __strlen_user - .ent __strlen_user - .frame sp, 0, ra - - .align 3 -__strlen_user: - ldah a1, 32767(zero) # do not use plain strlen_user() for strings - # that might be almost 2 GB long; you should - # be using strnlen_user() instead - - .globl __strnlen_user - - .align 3 -__strnlen_user: - .prologue 0 - - EX( ldq_u t0, 0(a0) ) # load first quadword (a0 may be misaligned) - lda t1, -1(zero) - insqh t1, a0, t1 - andnot a0, 7, v0 - or t1, t0, t0 - subq a0, 1, a0 # get our +1 for the return - cmpbge zero, t0, t1 # t1 <- bitmask: bit i == 1 <==> i-th byte == 0 - subq a1, 7, t2 - subq a0, v0, t0 - bne t1, $found - - addq t2, t0, t2 - addq a1, 1, a1 - - .align 3 -$loop: ble t2, $limit - EX( ldq t0, 8(v0) ) - subq t2, 8, t2 - addq v0, 8, v0 # addr += 8 - cmpbge zero, t0, t1 - beq t1, $loop - -$found: negq t1, t2 # clear all but least set bit - and t1, t2, t1 - - and t1, 0xf0, t2 # binary search for that set bit - and t1, 0xcc, t3 - and t1, 0xaa, t4 - cmovne t2, 4, t2 - cmovne t3, 2, t3 - cmovne t4, 1, t4 - addq t2, t3, t2 - addq v0, t4, v0 - addq v0, t2, v0 - nop # dual issue next two on ev4 and ev5 - subq v0, a0, v0 -$exception: - ret - - .align 3 # currently redundant -$limit: - subq a1, t2, v0 - ret - - .end __strlen_user diff --git a/arch/alpha/lib/strncpy_from_user.S b/arch/alpha/lib/strncpy_from_user.S deleted file mode 100644 index 73ee21160ff..00000000000 --- a/arch/alpha/lib/strncpy_from_user.S +++ /dev/null @@ -1,339 +0,0 @@ -/* - * arch/alpha/lib/strncpy_from_user.S - * Contributed by Richard Henderson (rth@tamu.edu) - * - * Just like strncpy except in the return value: - * - * -EFAULT if an exception occurs before the terminator is copied. - * N if the buffer filled. - * - * Otherwise the length of the string is returned. - */ - - -#include <asm/errno.h> -#include <asm/regdef.h> - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda $31, $exception-99b($0); \ - .previous - - - .set noat - .set noreorder - .text - - .globl __strncpy_from_user - .ent __strncpy_from_user - .frame $30, 0, $26 - .prologue 0 - - .align 3 -$aligned: - /* On entry to this basic block: - t0 == the first destination word for masking back in - t1 == the first source word. */ - - /* Create the 1st output word and detect 0's in the 1st input word. */ - lda t2, -1 # e1 : build a mask against false zero - mskqh t2, a1, t2 # e0 : detection in the src word - mskqh t1, a1, t3 # e0 : - ornot t1, t2, t2 # .. e1 : - mskql t0, a1, t0 # e0 : assemble the first output word - cmpbge zero, t2, t8 # .. e1 : bits set iff null found - or t0, t3, t0 # e0 : - beq a2, $a_eoc # .. e1 : - bne t8, $a_eos # .. e1 : - - /* On entry to this basic block: - t0 == a source word not containing a null. */ - -$a_loop: - stq_u t0, 0(a0) # e0 : - addq a0, 8, a0 # .. e1 : - EX( ldq_u t0, 0(a1) ) # e0 : - addq a1, 8, a1 # .. e1 : - subq a2, 1, a2 # e0 : - cmpbge zero, t0, t8 # .. e1 (stall) - beq a2, $a_eoc # e1 : - beq t8, $a_loop # e1 : - - /* Take care of the final (partial) word store. At this point - the end-of-count bit is set in t8 iff it applies. - - On entry to this basic block we have: - t0 == the source word containing the null - t8 == the cmpbge mask that found it. */ - -$a_eos: - negq t8, t12 # e0 : find low bit set - and t8, t12, t12 # e1 (stall) - - /* For the sake of the cache, don't read a destination word - if we're not going to need it. */ - and t12, 0x80, t6 # e0 : - bne t6, 1f # .. e1 (zdb) - - /* We're doing a partial word store and so need to combine - our source and original destination words. */ - ldq_u t1, 0(a0) # e0 : - subq t12, 1, t6 # .. e1 : - or t12, t6, t8 # e0 : - unop # - zapnot t0, t8, t0 # e0 : clear src bytes > null - zap t1, t8, t1 # .. e1 : clear dst bytes <= null - or t0, t1, t0 # e1 : - -1: stq_u t0, 0(a0) - br $finish_up - - /* Add the end-of-count bit to the eos detection bitmask. */ -$a_eoc: - or t10, t8, t8 - br $a_eos - - /*** The Function Entry Point ***/ - .align 3 -__strncpy_from_user: - mov a0, v0 # save the string start - beq a2, $zerolength - - /* Are source and destination co-aligned? */ - xor a0, a1, t1 # e0 : - and a0, 7, t0 # .. e1 : find dest misalignment - and t1, 7, t1 # e0 : - addq a2, t0, a2 # .. e1 : bias count by dest misalignment - subq a2, 1, a2 # e0 : - and a2, 7, t2 # e1 : - srl a2, 3, a2 # e0 : a2 = loop counter = (count - 1)/8 - addq zero, 1, t10 # .. e1 : - sll t10, t2, t10 # e0 : t10 = bitmask of last count byte - bne t1, $unaligned # .. e1 : - - /* We are co-aligned; take care of a partial first word. */ - - EX( ldq_u t1, 0(a1) ) # e0 : load first src word - addq a1, 8, a1 # .. e1 : - - beq t0, $aligned # avoid loading dest word if not needed - ldq_u t0, 0(a0) # e0 : - br $aligned # .. e1 : - - -/* The source and destination are not co-aligned. Align the destination - and cope. We have to be very careful about not reading too much and - causing a SEGV. */ - - .align 3 -$u_head: - /* We know just enough now to be able to assemble the first - full source word. We can still find a zero at the end of it - that prevents us from outputting the whole thing. - - On entry to this basic block: - t0 == the first dest word, unmasked - t1 == the shifted low bits of the first source word - t6 == bytemask that is -1 in dest word bytes */ - - EX( ldq_u t2, 8(a1) ) # e0 : load second src word - addq a1, 8, a1 # .. e1 : - mskql t0, a0, t0 # e0 : mask trailing garbage in dst - extqh t2, a1, t4 # e0 : - or t1, t4, t1 # e1 : first aligned src word complete - mskqh t1, a0, t1 # e0 : mask leading garbage in src - or t0, t1, t0 # e0 : first output word complete - or t0, t6, t6 # e1 : mask original data for zero test - cmpbge zero, t6, t8 # e0 : - beq a2, $u_eocfin # .. e1 : - bne t8, $u_final # e1 : - - lda t6, -1 # e1 : mask out the bits we have - mskql t6, a1, t6 # e0 : already seen - stq_u t0, 0(a0) # e0 : store first output word - or t6, t2, t2 # .. e1 : - cmpbge zero, t2, t8 # e0 : find nulls in second partial - addq a0, 8, a0 # .. e1 : - subq a2, 1, a2 # e0 : - bne t8, $u_late_head_exit # .. e1 : - - /* Finally, we've got all the stupid leading edge cases taken care - of and we can set up to enter the main loop. */ - - extql t2, a1, t1 # e0 : position hi-bits of lo word - EX( ldq_u t2, 8(a1) ) # .. e1 : read next high-order source word - addq a1, 8, a1 # e0 : - cmpbge zero, t2, t8 # e1 (stall) - beq a2, $u_eoc # e1 : - bne t8, $u_eos # e1 : - - /* Unaligned copy main loop. In order to avoid reading too much, - the loop is structured to detect zeros in aligned source words. - This has, unfortunately, effectively pulled half of a loop - iteration out into the head and half into the tail, but it does - prevent nastiness from accumulating in the very thing we want - to run as fast as possible. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word - - We further know that t2 does not contain a null terminator. */ - - .align 3 -$u_loop: - extqh t2, a1, t0 # e0 : extract high bits for current word - addq a1, 8, a1 # .. e1 : - extql t2, a1, t3 # e0 : extract low bits for next time - addq a0, 8, a0 # .. e1 : - or t0, t1, t0 # e0 : current dst word now complete - EX( ldq_u t2, 0(a1) ) # .. e1 : load high word for next time - stq_u t0, -8(a0) # e0 : save the current word - mov t3, t1 # .. e1 : - subq a2, 1, a2 # e0 : - cmpbge zero, t2, t8 # .. e1 : test new word for eos - beq a2, $u_eoc # e1 : - beq t8, $u_loop # e1 : - - /* We've found a zero somewhere in the source word we just read. - If it resides in the lower half, we have one (probably partial) - word to write out, and if it resides in the upper half, we - have one full and one partial word left to write out. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word. */ -$u_eos: - extqh t2, a1, t0 # e0 : - or t0, t1, t0 # e1 : first (partial) source word complete - - cmpbge zero, t0, t8 # e0 : is the null in this first bit? - bne t8, $u_final # .. e1 (zdb) - - stq_u t0, 0(a0) # e0 : the null was in the high-order bits - addq a0, 8, a0 # .. e1 : - subq a2, 1, a2 # e1 : - -$u_late_head_exit: - extql t2, a1, t0 # .. e0 : - cmpbge zero, t0, t8 # e0 : - or t8, t10, t6 # e1 : - cmoveq a2, t6, t8 # e0 : - nop # .. e1 : - - /* Take care of a final (probably partial) result word. - On entry to this basic block: - t0 == assembled source word - t8 == cmpbge mask that found the null. */ -$u_final: - negq t8, t6 # e0 : isolate low bit set - and t6, t8, t12 # e1 : - - and t12, 0x80, t6 # e0 : avoid dest word load if we can - bne t6, 1f # .. e1 (zdb) - - ldq_u t1, 0(a0) # e0 : - subq t12, 1, t6 # .. e1 : - or t6, t12, t8 # e0 : - zapnot t0, t8, t0 # .. e1 : kill source bytes > null - zap t1, t8, t1 # e0 : kill dest bytes <= null - or t0, t1, t0 # e1 : - -1: stq_u t0, 0(a0) # e0 : - br $finish_up - -$u_eoc: # end-of-count - extqh t2, a1, t0 - or t0, t1, t0 - cmpbge zero, t0, t8 - -$u_eocfin: # end-of-count, final word - or t10, t8, t8 - br $u_final - - /* Unaligned copy entry point. */ - .align 3 -$unaligned: - - EX( ldq_u t1, 0(a1) ) # e0 : load first source word - - and a0, 7, t4 # .. e1 : find dest misalignment - and a1, 7, t5 # e0 : find src misalignment - - /* Conditionally load the first destination word and a bytemask - with 0xff indicating that the destination byte is sacrosanct. */ - - mov zero, t0 # .. e1 : - mov zero, t6 # e0 : - beq t4, 1f # .. e1 : - ldq_u t0, 0(a0) # e0 : - lda t6, -1 # .. e1 : - mskql t6, a0, t6 # e0 : -1: - subq a1, t4, a1 # .. e1 : sub dest misalignment from src addr - - /* If source misalignment is larger than dest misalignment, we need - extra startup checks to avoid SEGV. */ - - cmplt t4, t5, t12 # e1 : - extql t1, a1, t1 # .. e0 : shift src into place - lda t2, -1 # e0 : for creating masks later - beq t12, $u_head # e1 : - - mskqh t2, t5, t2 # e0 : begin src byte validity mask - cmpbge zero, t1, t8 # .. e1 : is there a zero? - extql t2, a1, t2 # e0 : - or t8, t10, t5 # .. e1 : test for end-of-count too - cmpbge zero, t2, t3 # e0 : - cmoveq a2, t5, t8 # .. e1 : - andnot t8, t3, t8 # e0 : - beq t8, $u_head # .. e1 (zdb) - - /* At this point we've found a zero in the first partial word of - the source. We need to isolate the valid source data and mask - it into the original destination data. (Incidentally, we know - that we'll need at least one byte of that original dest word.) */ - - ldq_u t0, 0(a0) # e0 : - negq t8, t6 # .. e1 : build bitmask of bytes <= zero - mskqh t1, t4, t1 # e0 : - and t6, t8, t12 # .. e1 : - subq t12, 1, t6 # e0 : - or t6, t12, t8 # e1 : - - zapnot t2, t8, t2 # e0 : prepare source word; mirror changes - zapnot t1, t8, t1 # .. e1 : to source validity mask - - andnot t0, t2, t0 # e0 : zero place for source to reside - or t0, t1, t0 # e1 : and put it there - stq_u t0, 0(a0) # e0 : - -$finish_up: - zapnot t0, t12, t4 # was last byte written null? - cmovne t4, 1, t4 - - and t12, 0xf0, t3 # binary search for the address of the - and t12, 0xcc, t2 # last byte written - and t12, 0xaa, t1 - bic a0, 7, t0 - cmovne t3, 4, t3 - cmovne t2, 2, t2 - cmovne t1, 1, t1 - addq t0, t3, t0 - addq t1, t2, t1 - addq t0, t1, t0 - addq t0, t4, t0 # add one if we filled the buffer - - subq t0, v0, v0 # find string length - ret - -$zerolength: - clr v0 -$exception: - ret - - .end __strncpy_from_user diff --git a/arch/alpha/mm/fault.c b/arch/alpha/mm/fault.c index 5eecab1a84e..0c4132dd350 100644 --- a/arch/alpha/mm/fault.c +++ b/arch/alpha/mm/fault.c @@ -89,6 +89,8 @@ do_page_fault(unsigned long address, unsigned long mmcsr, const struct exception_table_entry *fixup; int fault, si_code = SEGV_MAPERR; siginfo_t info; + unsigned int flags = (FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE | + (cause > 0 ? FAULT_FLAG_WRITE : 0)); /* As of EV6, a load into $31/$f31 is a prefetch, and never faults (or is suppressed by the PALcode). Support that for older CPUs @@ -114,6 +116,7 @@ do_page_fault(unsigned long address, unsigned long mmcsr, goto vmalloc_fault; #endif +retry: down_read(&mm->mmap_sem); vma = find_vma(mm, address); if (!vma) @@ -144,8 +147,11 @@ do_page_fault(unsigned long address, unsigned long mmcsr, /* If for any reason at all we couldn't handle the fault, make sure we exit gracefully rather than endlessly redo the fault. */ - fault = handle_mm_fault(mm, vma, address, cause > 0 ? FAULT_FLAG_WRITE : 0); - up_read(&mm->mmap_sem); + fault = handle_mm_fault(mm, vma, address, flags); + + if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) + return; + if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; @@ -153,10 +159,26 @@ do_page_fault(unsigned long address, unsigned long mmcsr, goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) - current->maj_flt++; - else - current->min_flt++; + + if (flags & FAULT_FLAG_ALLOW_RETRY) { + if (fault & VM_FAULT_MAJOR) + current->maj_flt++; + else + current->min_flt++; + if (fault & VM_FAULT_RETRY) { + flags &= ~FAULT_FLAG_ALLOW_RETRY; + + /* No need to up_read(&mm->mmap_sem) as we would + * have already released it in __lock_page_or_retry + * in mm/filemap.c. + */ + + goto retry; + } + } + + up_read(&mm->mmap_sem); + return; /* Something tried to access memory that isn't in our memory map. @@ -186,12 +208,14 @@ do_page_fault(unsigned long address, unsigned long mmcsr, /* We ran out of memory, or some other thing happened to us that made us unable to handle the page fault gracefully. */ out_of_memory: + up_read(&mm->mmap_sem); if (!user_mode(regs)) goto no_context; pagefault_out_of_memory(); return; do_sigbus: + up_read(&mm->mmap_sem); /* Send a sigbus, regardless of whether we were in kernel or user mode. */ info.si_signo = SIGBUS; diff --git a/arch/alpha/oprofile/common.c b/arch/alpha/oprofile/common.c index a0a5d27aa21..b8ce18f485d 100644 --- a/arch/alpha/oprofile/common.c +++ b/arch/alpha/oprofile/common.c @@ -12,6 +12,7 @@ #include <linux/smp.h> #include <linux/errno.h> #include <asm/ptrace.h> +#include <asm/special_insns.h> #include "op_impl.h" diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e91c7cdc6fe..6d6e18fee9f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -38,7 +38,6 @@ config ARM select HARDIRQS_SW_RESEND select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW - select GENERIC_IRQ_PROBE select ARCH_WANT_IPC_PARSE_VERSION select HARDIRQS_SW_RESEND select CPU_PM if (SUSPEND || CPU_IDLE) @@ -126,11 +125,6 @@ config TRACE_IRQFLAGS_SUPPORT bool default y -config GENERIC_LOCKBREAK - bool - default y - depends on SMP && PREEMPT - config RWSEM_GENERIC_SPINLOCK bool default y diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index a874dbfb5ae..e6138310e5c 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -51,11 +51,11 @@ dma-apbh@80004000 { compatible = "fsl,imx23-dma-apbh"; - reg = <0x80004000 2000>; + reg = <0x80004000 0x2000>; }; ecc@80008000 { - reg = <0x80008000 2000>; + reg = <0x80008000 0x2000>; status = "disabled"; }; @@ -63,7 +63,7 @@ compatible = "fsl,imx23-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; - reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <13>, <56>; interrupt-names = "gpmi-dma", "bch"; @@ -72,14 +72,14 @@ }; ssp0: ssp@80010000 { - reg = <0x80010000 2000>; + reg = <0x80010000 0x2000>; interrupts = <15 14>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; etm@80014000 { - reg = <0x80014000 2000>; + reg = <0x80014000 0x2000>; status = "disabled"; }; @@ -87,7 +87,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx23-pinctrl", "simple-bus"; - reg = <0x80018000 2000>; + reg = <0x80018000 0x2000>; gpio0: gpio@0 { compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; @@ -273,32 +273,32 @@ }; emi@80020000 { - reg = <0x80020000 2000>; + reg = <0x80020000 0x2000>; status = "disabled"; }; dma-apbx@80024000 { compatible = "fsl,imx23-dma-apbx"; - reg = <0x80024000 2000>; + reg = <0x80024000 0x2000>; }; dcp@80028000 { - reg = <0x80028000 2000>; + reg = <0x80028000 0x2000>; status = "disabled"; }; pxp@8002a000 { - reg = <0x8002a000 2000>; + reg = <0x8002a000 0x2000>; status = "disabled"; }; ocotp@8002c000 { - reg = <0x8002c000 2000>; + reg = <0x8002c000 0x2000>; status = "disabled"; }; axi-ahb@8002e000 { - reg = <0x8002e000 2000>; + reg = <0x8002e000 0x2000>; status = "disabled"; }; @@ -310,14 +310,14 @@ }; ssp1: ssp@80034000 { - reg = <0x80034000 2000>; + reg = <0x80034000 0x2000>; interrupts = <2 20>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; tvenc@80038000 { - reg = <0x80038000 2000>; + reg = <0x80038000 0x2000>; status = "disabled"; }; }; @@ -330,37 +330,37 @@ ranges; clkctl@80040000 { - reg = <0x80040000 2000>; + reg = <0x80040000 0x2000>; status = "disabled"; }; saif0: saif@80042000 { - reg = <0x80042000 2000>; + reg = <0x80042000 0x2000>; status = "disabled"; }; power@80044000 { - reg = <0x80044000 2000>; + reg = <0x80044000 0x2000>; status = "disabled"; }; saif1: saif@80046000 { - reg = <0x80046000 2000>; + reg = <0x80046000 0x2000>; status = "disabled"; }; audio-out@80048000 { - reg = <0x80048000 2000>; + reg = <0x80048000 0x2000>; status = "disabled"; }; audio-in@8004c000 { - reg = <0x8004c000 2000>; + reg = <0x8004c000 0x2000>; status = "disabled"; }; lradc@80050000 { - reg = <0x80050000 2000>; + reg = <0x80050000 0x2000>; status = "disabled"; }; @@ -370,26 +370,26 @@ }; i2c@80058000 { - reg = <0x80058000 2000>; + reg = <0x80058000 0x2000>; status = "disabled"; }; rtc@8005c000 { compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc"; - reg = <0x8005c000 2000>; + reg = <0x8005c000 0x2000>; interrupts = <22>; }; pwm: pwm@80064000 { compatible = "fsl,imx23-pwm"; - reg = <0x80064000 2000>; + reg = <0x80064000 0x2000>; #pwm-cells = <2>; fsl,pwm-number = <5>; status = "disabled"; }; timrot@80068000 { - reg = <0x80068000 2000>; + reg = <0x80068000 0x2000>; status = "disabled"; }; @@ -429,7 +429,7 @@ ranges; usbctrl@80080000 { - reg = <0x80080000 0x10000>; + reg = <0x80080000 0x40000>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts index d3f8296e19e..0a8978a40ec 100644 --- a/arch/arm/boot/dts/imx27-3ds.dts +++ b/arch/arm/boot/dts/imx27-3ds.dts @@ -27,7 +27,7 @@ status = "okay"; }; - uart@1000a000 { + uart1: serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 00bae3aad5a..5303ab680a3 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -19,6 +19,12 @@ serial3 = &uart4; serial4 = &uart5; serial5 = &uart6; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; }; avic: avic-interrupt-controller@e0000000 { diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 787efac68da..3fa6d190fab 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -57,18 +57,18 @@ }; hsadc@80002000 { - reg = <0x80002000 2000>; + reg = <0x80002000 0x2000>; interrupts = <13 87>; status = "disabled"; }; dma-apbh@80004000 { compatible = "fsl,imx28-dma-apbh"; - reg = <0x80004000 2000>; + reg = <0x80004000 0x2000>; }; perfmon@80006000 { - reg = <0x80006000 800>; + reg = <0x80006000 0x800>; interrupts = <27>; status = "disabled"; }; @@ -77,7 +77,7 @@ compatible = "fsl,imx28-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; - reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <88>, <41>; interrupt-names = "gpmi-dma", "bch"; @@ -86,28 +86,28 @@ }; ssp0: ssp@80010000 { - reg = <0x80010000 2000>; + reg = <0x80010000 0x2000>; interrupts = <96 82>; fsl,ssp-dma-channel = <0>; status = "disabled"; }; ssp1: ssp@80012000 { - reg = <0x80012000 2000>; + reg = <0x80012000 0x2000>; interrupts = <97 83>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; ssp2: ssp@80014000 { - reg = <0x80014000 2000>; + reg = <0x80014000 0x2000>; interrupts = <98 84>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; ssp3: ssp@80016000 { - reg = <0x80016000 2000>; + reg = <0x80016000 0x2000>; interrupts = <99 85>; fsl,ssp-dma-channel = <3>; status = "disabled"; @@ -117,7 +117,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-pinctrl", "simple-bus"; - reg = <0x80018000 2000>; + reg = <0x80018000 0x2000>; gpio0: gpio@0 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; @@ -510,96 +510,96 @@ }; digctl@8001c000 { - reg = <0x8001c000 2000>; + reg = <0x8001c000 0x2000>; interrupts = <89>; status = "disabled"; }; etm@80022000 { - reg = <0x80022000 2000>; + reg = <0x80022000 0x2000>; status = "disabled"; }; dma-apbx@80024000 { compatible = "fsl,imx28-dma-apbx"; - reg = <0x80024000 2000>; + reg = <0x80024000 0x2000>; }; dcp@80028000 { - reg = <0x80028000 2000>; + reg = <0x80028000 0x2000>; interrupts = <52 53 54>; status = "disabled"; }; pxp@8002a000 { - reg = <0x8002a000 2000>; + reg = <0x8002a000 0x2000>; interrupts = <39>; status = "disabled"; }; ocotp@8002c000 { - reg = <0x8002c000 2000>; + reg = <0x8002c000 0x2000>; status = "disabled"; }; axi-ahb@8002e000 { - reg = <0x8002e000 2000>; + reg = <0x8002e000 0x2000>; status = "disabled"; }; lcdif@80030000 { compatible = "fsl,imx28-lcdif"; - reg = <0x80030000 2000>; + reg = <0x80030000 0x2000>; interrupts = <38 86>; status = "disabled"; }; can0: can@80032000 { compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; - reg = <0x80032000 2000>; + reg = <0x80032000 0x2000>; interrupts = <8>; status = "disabled"; }; can1: can@80034000 { compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; - reg = <0x80034000 2000>; + reg = <0x80034000 0x2000>; interrupts = <9>; status = "disabled"; }; simdbg@8003c000 { - reg = <0x8003c000 200>; + reg = <0x8003c000 0x200>; status = "disabled"; }; simgpmisel@8003c200 { - reg = <0x8003c200 100>; + reg = <0x8003c200 0x100>; status = "disabled"; }; simsspsel@8003c300 { - reg = <0x8003c300 100>; + reg = <0x8003c300 0x100>; status = "disabled"; }; simmemsel@8003c400 { - reg = <0x8003c400 100>; + reg = <0x8003c400 0x100>; status = "disabled"; }; gpiomon@8003c500 { - reg = <0x8003c500 100>; + reg = <0x8003c500 0x100>; status = "disabled"; }; simenet@8003c700 { - reg = <0x8003c700 100>; + reg = <0x8003c700 0x100>; status = "disabled"; }; armjtag@8003c800 { - reg = <0x8003c800 100>; + reg = <0x8003c800 0x100>; status = "disabled"; }; }; @@ -612,45 +612,45 @@ ranges; clkctl@80040000 { - reg = <0x80040000 2000>; + reg = <0x80040000 0x2000>; status = "disabled"; }; saif0: saif@80042000 { compatible = "fsl,imx28-saif"; - reg = <0x80042000 2000>; + reg = <0x80042000 0x2000>; interrupts = <59 80>; fsl,saif-dma-channel = <4>; status = "disabled"; }; power@80044000 { - reg = <0x80044000 2000>; + reg = <0x80044000 0x2000>; status = "disabled"; }; saif1: saif@80046000 { compatible = "fsl,imx28-saif"; - reg = <0x80046000 2000>; + reg = <0x80046000 0x2000>; interrupts = <58 81>; fsl,saif-dma-channel = <5>; status = "disabled"; }; lradc@80050000 { - reg = <0x80050000 2000>; + reg = <0x80050000 0x2000>; status = "disabled"; }; spdif@80054000 { - reg = <0x80054000 2000>; + reg = <0x80054000 0x2000>; interrupts = <45 66>; status = "disabled"; }; rtc@80056000 { compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; - reg = <0x80056000 2000>; + reg = <0x80056000 0x2000>; interrupts = <29>; }; @@ -658,7 +658,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-i2c"; - reg = <0x80058000 2000>; + reg = <0x80058000 0x2000>; interrupts = <111 68>; clock-frequency = <100000>; status = "disabled"; @@ -668,7 +668,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-i2c"; - reg = <0x8005a000 2000>; + reg = <0x8005a000 0x2000>; interrupts = <110 69>; clock-frequency = <100000>; status = "disabled"; @@ -676,14 +676,14 @@ pwm: pwm@80064000 { compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; - reg = <0x80064000 2000>; + reg = <0x80064000 0x2000>; #pwm-cells = <2>; fsl,pwm-number = <8>; status = "disabled"; }; timrot@80068000 { - reg = <0x80068000 2000>; + reg = <0x80068000 0x2000>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index de065b5976e..cd86177a3ea 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -53,7 +53,7 @@ spi-max-frequency = <6000000>; reg = <0>; interrupt-parent = <&gpio1>; - interrupts = <8>; + interrupts = <8 0x4>; regulators { sw1_reg: sw1 { diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 53cbaa3d4f9..aba28dc87fc 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -17,6 +17,10 @@ serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; }; tzic: tz-interrupt-controller@e0000000 { diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 5b8eafcdbee..da895e93a99 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -64,12 +64,32 @@ reg = <0xf4000000 0x2000000>; phy-mode = "mii"; interrupt-parent = <&gpio2>; - interrupts = <31>; + interrupts = <31 0x8>; reg-io-width = <4>; + /* + * VDD33A and VDDVARIO of LAN9220 are supplied by + * SW4_3V3 of LTC3589. Before the regulator driver + * for this PMIC is available, we use a fixed dummy + * 3V3 regulator to get LAN9220 driver probing work. + */ + vdd33a-supply = <®_3p3v>; + vddvario-supply = <®_3p3v>; smsc,irq-push-pull; }; }; + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index fc79cdc4b4e..cd37165edce 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -19,6 +19,13 @@ serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; }; tzic: tz-interrupt-controller@0fffc000 { diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index d42e851ceb9..72f30f3e617 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -53,6 +53,7 @@ fsl,pins = < 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ + 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */ >; }; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 3d3c64b014e..fd57079f71a 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -19,6 +19,13 @@ serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; }; cpus { diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index f725b9637b3..3c9f32f9b6b 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -192,6 +192,7 @@ CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y CONFIG_DMADEVICES=y CONFIG_IMX_SDMA=y +CONFIG_MXS_DMA=y CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index ccdb6357fb7..4edcfb4e4de 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -34,7 +34,6 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_AUTO_ZRELADDR=y CONFIG_FPE_NWFPE=y CONFIG_NET=y diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 1d24f8458be..71277a1591b 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -7,7 +7,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_KALLSYMS is not set -# CONFIG_BUG is not set +# CONFIG_BUGVERBOSE is not set # CONFIG_ELF_CORE is not set # CONFIG_SHMEM is not set CONFIG_SLOB=y diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index f66626d71e7..41dc31f834c 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -195,6 +195,18 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0) +#define pte_none(pte) (!pte_val(pte)) +#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) +#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY)) +#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) +#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) +#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) +#define pte_special(pte) (0) + +#define pte_present_user(pte) \ + ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ + (L_PTE_PRESENT | L_PTE_USER)) + #if __LINUX_ARM_ARCH__ < 6 static inline void __sync_icache_dcache(pte_t pteval) { @@ -206,25 +218,15 @@ extern void __sync_icache_dcache(pte_t pteval); static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval) { - if (addr >= TASK_SIZE) - set_pte_ext(ptep, pteval, 0); - else { + unsigned long ext = 0; + + if (addr < TASK_SIZE && pte_present_user(pteval)) { __sync_icache_dcache(pteval); - set_pte_ext(ptep, pteval, PTE_EXT_NG); + ext |= PTE_EXT_NG; } -} -#define pte_none(pte) (!pte_val(pte)) -#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) -#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY)) -#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) -#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) -#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) -#define pte_special(pte) (0) - -#define pte_present_user(pte) \ - ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ - (L_PTE_PRESENT | L_PTE_USER)) + set_pte_ext(ptep, pteval, ext); +} #define PTE_BIT_FUNC(fn,op) \ static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } @@ -251,13 +253,13 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) * * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * <--------------- offset --------------------> <- type --> 0 0 0 + * <--------------- offset ----------------------> < type -> 0 0 0 * - * This gives us up to 63 swap files and 32GB per swap file. Note that + * This gives us up to 31 swap files and 64GB per swap file. Note that * the offset field is always non-zero. */ #define __SWP_TYPE_SHIFT 3 -#define __SWP_TYPE_BITS 6 +#define __SWP_TYPE_BITS 5 #define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1) #define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT) diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h index e3f75726343..05b8e82ec9f 100644 --- a/arch/arm/include/asm/sched_clock.h +++ b/arch/arm/include/asm/sched_clock.h @@ -10,5 +10,7 @@ extern void sched_clock_postinit(void); extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate); +extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, + unsigned long rate); #endif diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index 27d186abbc0..f4515393248 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -21,6 +21,8 @@ struct clock_data { u32 epoch_cyc_copy; u32 mult; u32 shift; + bool suspended; + bool needs_suspend; }; static void sched_clock_poll(unsigned long wrap_ticks); @@ -49,6 +51,9 @@ static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask) u64 epoch_ns; u32 epoch_cyc; + if (cd.suspended) + return cd.epoch_ns; + /* * Load the epoch_cyc and epoch_ns atomically. We do this by * ensuring that we always write epoch_cyc, epoch_ns and @@ -98,6 +103,13 @@ static void sched_clock_poll(unsigned long wrap_ticks) update_sched_clock(); } +void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, + unsigned long rate) +{ + setup_sched_clock(read, bits, rate); + cd.needs_suspend = true; +} + void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) { unsigned long r, w; @@ -169,11 +181,23 @@ void __init sched_clock_postinit(void) static int sched_clock_suspend(void) { sched_clock_poll(sched_clock_timer.data); + if (cd.needs_suspend) + cd.suspended = true; return 0; } +static void sched_clock_resume(void) +{ + if (cd.needs_suspend) { + cd.epoch_cyc = read_sched_clock(); + cd.epoch_cyc_copy = cd.epoch_cyc; + cd.suspended = false; + } +} + static struct syscore_ops sched_clock_ops = { .suspend = sched_clock_suspend, + .resume = sched_clock_resume, }; static int __init sched_clock_syscore_init(void) diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 198b08456e9..26c12c6440f 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -321,7 +321,7 @@ void store_cpu_topology(unsigned int cpuid) * init_cpu_topology is called at boot when only one cpu is running * which prevent simultaneous write access to cpu_topology array */ -void init_cpu_topology(void) +void __init init_cpu_topology(void) { unsigned int cpu; diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 2473fd1fd51..af72969820b 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -16,13 +16,30 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ call_with_stack.o mmu-y := clear_user.o copy_page.o getuser.o putuser.o -mmu-y += copy_from_user.o copy_to_user.o + +# the code in uaccess.S is not preemption safe and +# probably faster on ARMv3 only +ifeq ($(CONFIG_PREEMPT),y) + mmu-y += copy_from_user.o copy_to_user.o +else +ifneq ($(CONFIG_CPU_32v3),y) + mmu-y += copy_from_user.o copy_to_user.o +else + mmu-y += uaccess.o +endif +endif # using lib_ here won't override already available weak symbols obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o -lib-$(CONFIG_MMU) += $(mmu-y) -lib-y += io-readsw-armv4.o io-writesw-armv4.o +lib-$(CONFIG_MMU) += $(mmu-y) + +ifeq ($(CONFIG_CPU_32v3),y) + lib-y += io-readsw-armv3.o io-writesw-armv3.o +else + lib-y += io-readsw-armv4.o io-writesw-armv4.o +endif + lib-$(CONFIG_ARCH_RPC) += ecard.o io-acorn.o floppydma.o lib-$(CONFIG_ARCH_SHARK) += io-shark.o diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S new file mode 100644 index 00000000000..88487c8c4f2 --- /dev/null +++ b/arch/arm/lib/io-readsw-armv3.S @@ -0,0 +1,106 @@ +/* + * linux/arch/arm/lib/io-readsw-armv3.S + * + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <asm/assembler.h> + +.Linsw_bad_alignment: + adr r0, .Linsw_bad_align_msg + mov r2, lr + b panic +.Linsw_bad_align_msg: + .asciz "insw: bad buffer alignment (0x%p, lr=0x%08lX)\n" + .align + +.Linsw_align: tst r1, #1 + bne .Linsw_bad_alignment + + ldr r3, [r0] + strb r3, [r1], #1 + mov r3, r3, lsr #8 + strb r3, [r1], #1 + + subs r2, r2, #1 + moveq pc, lr + +ENTRY(__raw_readsw) + teq r2, #0 @ do we have to check for the zero len? + moveq pc, lr + tst r1, #3 + bne .Linsw_align + +.Linsw_aligned: mov ip, #0xff + orr ip, ip, ip, lsl #8 + stmfd sp!, {r4, r5, r6, lr} + + subs r2, r2, #8 + bmi .Lno_insw_8 + +.Linsw_8_lp: ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + ldr r4, [r0] + and r4, r4, ip + ldr r5, [r0] + orr r4, r4, r5, lsl #16 + + ldr r5, [r0] + and r5, r5, ip + ldr r6, [r0] + orr r5, r5, r6, lsl #16 + + ldr r6, [r0] + and r6, r6, ip + ldr lr, [r0] + orr r6, r6, lr, lsl #16 + + stmia r1!, {r3 - r6} + + subs r2, r2, #8 + bpl .Linsw_8_lp + + tst r2, #7 + ldmeqfd sp!, {r4, r5, r6, pc} + +.Lno_insw_8: tst r2, #4 + beq .Lno_insw_4 + + ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + ldr r4, [r0] + and r4, r4, ip + ldr r5, [r0] + orr r4, r4, r5, lsl #16 + + stmia r1!, {r3, r4} + +.Lno_insw_4: tst r2, #2 + beq .Lno_insw_2 + + ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + str r3, [r1], #4 + +.Lno_insw_2: tst r2, #1 + ldrne r3, [r0] + strneb r3, [r1], #1 + movne r3, r3, lsr #8 + strneb r3, [r1] + + ldmfd sp!, {r4, r5, r6, pc} + + diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S new file mode 100644 index 00000000000..49b800419e3 --- /dev/null +++ b/arch/arm/lib/io-writesw-armv3.S @@ -0,0 +1,126 @@ +/* + * linux/arch/arm/lib/io-writesw-armv3.S + * + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <asm/assembler.h> + +.Loutsw_bad_alignment: + adr r0, .Loutsw_bad_align_msg + mov r2, lr + b panic +.Loutsw_bad_align_msg: + .asciz "outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n" + .align + +.Loutsw_align: tst r1, #1 + bne .Loutsw_bad_alignment + + add r1, r1, #2 + + ldr r3, [r1, #-4] + mov r3, r3, lsr #16 + orr r3, r3, r3, lsl #16 + str r3, [r0] + subs r2, r2, #1 + moveq pc, lr + +ENTRY(__raw_writesw) + teq r2, #0 @ do we have to check for the zero len? + moveq pc, lr + tst r1, #3 + bne .Loutsw_align + + stmfd sp!, {r4, r5, r6, lr} + + subs r2, r2, #8 + bmi .Lno_outsw_8 + +.Loutsw_8_lp: ldmia r1!, {r3, r4, r5, r6} + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r4, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r4, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r5, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r5, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r6, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r6, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + subs r2, r2, #8 + bpl .Loutsw_8_lp + + tst r2, #7 + ldmeqfd sp!, {r4, r5, r6, pc} + +.Lno_outsw_8: tst r2, #4 + beq .Lno_outsw_4 + + ldmia r1!, {r3, r4} + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r4, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r4, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + +.Lno_outsw_4: tst r2, #2 + beq .Lno_outsw_2 + + ldr r3, [r1], #4 + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + +.Lno_outsw_2: tst r2, #1 + + ldrne r3, [r1] + + movne ip, r3, lsl #16 + orrne ip, ip, ip, lsr #16 + strne ip, [r0] + + ldmfd sp!, {r4, r5, r6, pc} diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S new file mode 100644 index 00000000000..5c908b1cb8e --- /dev/null +++ b/arch/arm/lib/uaccess.S @@ -0,0 +1,564 @@ +/* + * linux/arch/arm/lib/uaccess.S + * + * Copyright (C) 1995, 1996,1997,1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Routines to block copy data to/from user memory + * These are highly optimised both for the 4k page size + * and for various alignments. + */ +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/errno.h> +#include <asm/domain.h> + + .text + +#define PAGE_SHIFT 12 + +/* Prototype: int __copy_to_user(void *to, const char *from, size_t n) + * Purpose : copy a block to user memory from kernel memory + * Params : to - user memory + * : from - kernel memory + * : n - number of bytes to copy + * Returns : Number of bytes NOT copied. + */ + +.Lc2u_dest_not_aligned: + rsb ip, ip, #4 + cmp ip, #2 + ldrb r3, [r1], #1 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #1 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + sub r2, r2, ip + b .Lc2u_dest_aligned + +ENTRY(__copy_to_user) + stmfd sp!, {r2, r4 - r7, lr} + cmp r2, #4 + blt .Lc2u_not_enough + ands ip, r0, #3 + bne .Lc2u_dest_not_aligned +.Lc2u_dest_aligned: + + ands ip, r1, #3 + bne .Lc2u_src_not_aligned +/* + * Seeing as there has to be at least 8 bytes to copy, we can + * copy one word, and force a user-mode page fault... + */ + +.Lc2u_0fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_0nowords + ldr r3, [r1], #4 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_0fupi +/* + * ip = max no. of bytes to copy before needing another "strt" insn + */ + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #32 + blt .Lc2u_0rem8lp + +.Lc2u_0cpy8lp: ldmia r1!, {r3 - r6} + stmia r0!, {r3 - r6} @ Shouldnt fault + ldmia r1!, {r3 - r6} + subs ip, ip, #32 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_0cpy8lp + +.Lc2u_0rem8lp: cmn ip, #16 + ldmgeia r1!, {r3 - r6} + stmgeia r0!, {r3 - r6} @ Shouldnt fault + tst ip, #8 + ldmneia r1!, {r3 - r4} + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + ldrne r3, [r1], #4 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_0fupi +.Lc2u_0nowords: teq ip, #0 + beq .Lc2u_finished +.Lc2u_nowords: cmp ip, #2 + ldrb r3, [r1], #1 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #1 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_not_enough: + movs ip, r2 + bne .Lc2u_nowords +.Lc2u_finished: mov r0, #0 + ldmfd sp!, {r2, r4 - r7, pc} + +.Lc2u_src_not_aligned: + bic r1, r1, #3 + ldr r7, [r1], #4 + cmp ip, #2 + bgt .Lc2u_3fupi + beq .Lc2u_2fupi +.Lc2u_1fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_1nowords + mov r3, r7, pull #8 + ldr r7, [r1], #4 + orr r3, r3, r7, push #24 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_1fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_1rem8lp + +.Lc2u_1cpy8lp: mov r3, r7, pull #8 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #24 + mov r4, r4, pull #8 + orr r4, r4, r5, push #24 + mov r5, r5, pull #8 + orr r5, r5, r6, push #24 + mov r6, r6, pull #8 + orr r6, r6, r7, push #24 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_1cpy8lp + +.Lc2u_1rem8lp: tst ip, #8 + movne r3, r7, pull #8 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #24 + movne r4, r4, pull #8 + orrne r4, r4, r7, push #24 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #8 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #24 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_1fupi +.Lc2u_1nowords: mov r3, r7, get_byte_1 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + movge r3, r7, get_byte_2 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + movgt r3, r7, get_byte_3 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_2fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_2nowords + mov r3, r7, pull #16 + ldr r7, [r1], #4 + orr r3, r3, r7, push #16 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_2fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_2rem8lp + +.Lc2u_2cpy8lp: mov r3, r7, pull #16 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #16 + mov r4, r4, pull #16 + orr r4, r4, r5, push #16 + mov r5, r5, pull #16 + orr r5, r5, r6, push #16 + mov r6, r6, pull #16 + orr r6, r6, r7, push #16 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_2cpy8lp + +.Lc2u_2rem8lp: tst ip, #8 + movne r3, r7, pull #16 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #16 + movne r4, r4, pull #16 + orrne r4, r4, r7, push #16 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #16 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #16 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_2fupi +.Lc2u_2nowords: mov r3, r7, get_byte_2 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + movge r3, r7, get_byte_3 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #0 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_3fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_3nowords + mov r3, r7, pull #24 + ldr r7, [r1], #4 + orr r3, r3, r7, push #8 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_3fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_3rem8lp + +.Lc2u_3cpy8lp: mov r3, r7, pull #24 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #8 + mov r4, r4, pull #24 + orr r4, r4, r5, push #8 + mov r5, r5, pull #24 + orr r5, r5, r6, push #8 + mov r6, r6, pull #24 + orr r6, r6, r7, push #8 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_3cpy8lp + +.Lc2u_3rem8lp: tst ip, #8 + movne r3, r7, pull #24 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #8 + movne r4, r4, pull #24 + orrne r4, r4, r7, push #8 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #24 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #8 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_3fupi +.Lc2u_3nowords: mov r3, r7, get_byte_3 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #0 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished +ENDPROC(__copy_to_user) + + .pushsection .fixup,"ax" + .align 0 +9001: ldmfd sp!, {r0, r4 - r7, pc} + .popsection + +/* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n); + * Purpose : copy a block from user memory to kernel memory + * Params : to - kernel memory + * : from - user memory + * : n - number of bytes to copy + * Returns : Number of bytes NOT copied. + */ +.Lcfu_dest_not_aligned: + rsb ip, ip, #4 + cmp ip, #2 +USER( TUSER( ldrb) r3, [r1], #1) @ May fault + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + sub r2, r2, ip + b .Lcfu_dest_aligned + +ENTRY(__copy_from_user) + stmfd sp!, {r0, r2, r4 - r7, lr} + cmp r2, #4 + blt .Lcfu_not_enough + ands ip, r0, #3 + bne .Lcfu_dest_not_aligned +.Lcfu_dest_aligned: + ands ip, r1, #3 + bne .Lcfu_src_not_aligned + +/* + * Seeing as there has to be at least 8 bytes to copy, we can + * copy one word, and force a user-mode page fault... + */ + +.Lcfu_0fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_0nowords +USER( TUSER( ldr) r3, [r1], #4) + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_0fupi +/* + * ip = max no. of bytes to copy before needing another "strt" insn + */ + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #32 + blt .Lcfu_0rem8lp + +.Lcfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault + stmia r0!, {r3 - r6} + ldmia r1!, {r3 - r6} @ Shouldnt fault + subs ip, ip, #32 + stmia r0!, {r3 - r6} + bpl .Lcfu_0cpy8lp + +.Lcfu_0rem8lp: cmn ip, #16 + ldmgeia r1!, {r3 - r6} @ Shouldnt fault + stmgeia r0!, {r3 - r6} + tst ip, #8 + ldmneia r1!, {r3 - r4} @ Shouldnt fault + stmneia r0!, {r3 - r4} + tst ip, #4 + TUSER( ldrne) r3, [r1], #4 @ Shouldnt fault + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_0fupi +.Lcfu_0nowords: teq ip, #0 + beq .Lcfu_finished +.Lcfu_nowords: cmp ip, #2 +USER( TUSER( ldrb) r3, [r1], #1) @ May fault + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_not_enough: + movs ip, r2 + bne .Lcfu_nowords +.Lcfu_finished: mov r0, #0 + add sp, sp, #8 + ldmfd sp!, {r4 - r7, pc} + +.Lcfu_src_not_aligned: + bic r1, r1, #3 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + cmp ip, #2 + bgt .Lcfu_3fupi + beq .Lcfu_2fupi +.Lcfu_1fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_1nowords + mov r3, r7, pull #8 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #24 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_1fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_1rem8lp + +.Lcfu_1cpy8lp: mov r3, r7, pull #8 + ldmia r1!, {r4 - r7} @ Shouldnt fault + subs ip, ip, #16 + orr r3, r3, r4, push #24 + mov r4, r4, pull #8 + orr r4, r4, r5, push #24 + mov r5, r5, pull #8 + orr r5, r5, r6, push #24 + mov r6, r6, pull #8 + orr r6, r6, r7, push #24 + stmia r0!, {r3 - r6} + bpl .Lcfu_1cpy8lp + +.Lcfu_1rem8lp: tst ip, #8 + movne r3, r7, pull #8 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #24 + movne r4, r4, pull #8 + orrne r4, r4, r7, push #24 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #8 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #24 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_1fupi +.Lcfu_1nowords: mov r3, r7, get_byte_1 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 + movge r3, r7, get_byte_2 + strgeb r3, [r0], #1 + movgt r3, r7, get_byte_3 + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_2fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_2nowords + mov r3, r7, pull #16 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #16 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_2fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_2rem8lp + + +.Lcfu_2cpy8lp: mov r3, r7, pull #16 + ldmia r1!, {r4 - r7} @ Shouldnt fault + subs ip, ip, #16 + orr r3, r3, r4, push #16 + mov r4, r4, pull #16 + orr r4, r4, r5, push #16 + mov r5, r5, pull #16 + orr r5, r5, r6, push #16 + mov r6, r6, pull #16 + orr r6, r6, r7, push #16 + stmia r0!, {r3 - r6} + bpl .Lcfu_2cpy8lp + +.Lcfu_2rem8lp: tst ip, #8 + movne r3, r7, pull #16 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #16 + movne r4, r4, pull #16 + orrne r4, r4, r7, push #16 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #16 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #16 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_2fupi +.Lcfu_2nowords: mov r3, r7, get_byte_2 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 + movge r3, r7, get_byte_3 + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #0) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_3fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_3nowords + mov r3, r7, pull #24 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #8 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_3fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_3rem8lp + +.Lcfu_3cpy8lp: mov r3, r7, pull #24 + ldmia r1!, {r4 - r7} @ Shouldnt fault + orr r3, r3, r4, push #8 + mov r4, r4, pull #24 + orr r4, r4, r5, push #8 + mov r5, r5, pull #24 + orr r5, r5, r6, push #8 + mov r6, r6, pull #24 + orr r6, r6, r7, push #8 + stmia r0!, {r3 - r6} + subs ip, ip, #16 + bpl .Lcfu_3cpy8lp + +.Lcfu_3rem8lp: tst ip, #8 + movne r3, r7, pull #24 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #8 + movne r4, r4, pull #24 + orrne r4, r4, r7, push #8 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #24 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #8 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_3fupi +.Lcfu_3nowords: mov r3, r7, get_byte_3 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished +ENDPROC(__copy_from_user) + + .pushsection .fixup,"ax" + .align 0 + /* + * We took an exception. r0 contains a pointer to + * the byte not copied. + */ +9001: ldr r2, [sp], #4 @ void *to + sub r2, r0, r2 @ bytes copied + ldr r1, [sp], #4 @ unsigned long count + subs r4, r1, r2 @ bytes left to copy + movne r1, r4 + blne __memzero + mov r0, r4 + ldmfd sp!, {r4 - r7, pc} + .popsection + diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 5de69f2fcca..f6b9fc70161 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -162,38 +162,6 @@ static void __init davinci_ntosd2_map_io(void) dm644x_init(); } -/* - I2C initialization -*/ -static struct davinci_i2c_platform_data ntosd2_i2c_pdata = { - .bus_freq = 20 /* kHz */, - .bus_delay = 100 /* usec */, -}; - -static struct i2c_board_info __initdata ntosd2_i2c_info[] = { -}; - -static int ntosd2_init_i2c(void) -{ - int status; - - davinci_init_i2c(&ntosd2_i2c_pdata); - status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type); - if (status == 0) { - status = gpio_direction_input(NTOSD2_MSP430_IRQ); - if (status == 0) { - status = gpio_to_irq(NTOSD2_MSP430_IRQ); - if (status > 0) { - ntosd2_i2c_info[0].irq = status; - i2c_register_board_info(1, - ntosd2_i2c_info, - ARRAY_SIZE(ntosd2_i2c_info)); - } - } - } - return status; -} - static struct davinci_mmc_config davinci_ntosd2_mmc_config = { .wires = 4, .version = MMC_CTLR_VERSION_1 @@ -218,7 +186,6 @@ static __init void davinci_ntosd2_init(void) { struct clk *aemif_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; - int status; aemif_clk = clk_get(NULL, "aemif"); clk_enable(aemif_clk); @@ -242,12 +209,6 @@ static __init void davinci_ntosd2_init(void) platform_add_devices(davinci_ntosd2_devices, ARRAY_SIZE(davinci_ntosd2_devices)); - /* Initialize I2C interface specific for this board */ - status = ntosd2_init_i2c(); - if (status < 0) - pr_warning("davinci_ntosd2_init: msp430 irq setup failed:" - " %d\n", status); - davinci_serial_init(&uart_config); dm644x_init_asp(&dm644x_ntosd2_snd_data); diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 373c3c00d24..c0bc83a7663 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -115,7 +115,7 @@ static __init int exynos_pm_dt_parse_domains(void) } #endif /* CONFIG_OF */ -static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, +static __init __maybe_unused void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, struct exynos_pm_domain *pd) { if (pdev->dev.bus) { diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 7aa6313fb16..f69ca468004 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -223,7 +223,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[per3_gate], "per", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0"); - clk_register_clkdev(clk[csi_ahb_gate], NULL, "mx2-camera.0"); + clk_register_clkdev(clk[csi_ahb_gate], "ahb", "mx2-camera.0"); clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc"); @@ -250,8 +250,10 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx-i2c.1"); clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0"); clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad"); - clk_register_clkdev(clk[emma_ahb_gate], "ahb", "imx-emma"); - clk_register_clkdev(clk[emma_ipg_gate], "ipg", "imx-emma"); + clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "mx2-camera.0"); + clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "mx2-camera.0"); + clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0"); + clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0"); clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL); clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL); clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL); diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index 8e19e70f90f..1253af2d997 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -130,7 +130,7 @@ int __init mx31_clocks_init(unsigned long fref) clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0"); clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core"); clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); - clk_register_clkdev(clk[kpp_gate], "kpp", NULL); + clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad"); clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0"); clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0"); clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0"); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index f6086693ebd..4bdcaa97bd9 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -303,6 +303,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_prepare_enable(clk[aips_tz2]); /* fec */ clk_prepare_enable(clk[spba]); clk_prepare_enable(clk[emi_fast_gate]); /* fec */ + clk_prepare_enable(clk[emi_slow_gate]); /* eim */ clk_prepare_enable(clk[tmax1]); clk_prepare_enable(clk[tmax2]); /* esdhc2, fec */ clk_prepare_enable(clk[tmax3]); /* esdhc1, esdhc4 */ diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index ebf680bebdf..3fa6c51390d 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/device.h> +#include <linux/export.h> #include <linux/spinlock.h> #include <linux/interrupt.h> #include <linux/irq.h> diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 7b1055c8e0b..3b2267529f5 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -456,7 +456,7 @@ static void __init ap_init_timer(void) clk = clk_get_sys("ap_timer", NULL); BUG_ON(IS_ERR(clk)); - clk_enable(clk); + clk_prepare_enable(clk); rate = clk_get_rate(clk); writel(0, TIMER0_VA_BASE + TIMER_CTRL); diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 2a576abf409..a5717558ee8 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -9,5 +9,5 @@ dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb -dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb -dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb +dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb +dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index ccdf83b17cf..9a8bbda195b 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -2,9 +2,6 @@ if ARCH_MXS source "arch/arm/mach-mxs/devices/Kconfig" -config MXS_OCOTP - bool - config SOC_IMX23 bool select ARM_AMBA @@ -66,7 +63,6 @@ config MACH_MX28EVK select MXS_HAVE_PLATFORM_MXS_SAIF select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_RTC_STMP3XXX - select MXS_OCOTP help Include support for MX28EVK platform. This includes specific configurations for the board and its peripherals. @@ -94,7 +90,6 @@ config MODULE_M28 select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXSFB - select MXS_OCOTP config MODULE_APX4 bool @@ -106,7 +101,6 @@ config MODULE_APX4 select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXS_SAIF - select MXS_OCOTP config MACH_TX28 bool "Ka-Ro TX28 module" diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index e41590ccb43..fed3695a133 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,7 +1,6 @@ # Common support -obj-y := devices.o icoll.o iomux.o system.o timer.o mm.o +obj-y := devices.o icoll.o iomux.o ocotp.o system.o timer.o mm.o -obj-$(CONFIG_MXS_OCOTP) += ocotp.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 5905ed130e9..d89d87ae144 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -953,12 +953,12 @@ static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = { static struct eeti_ts_platform_data eeti_ts_pdata = { .irq_active_high = 1, + .irq_gpio = GPIO_TOUCH_IRQ, }; static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = { .type = "eeti_ts", .addr = 0x0a, - .irq = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ), .platform_data = &eeti_ts_pdata, }; diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index e24961109b7..d56b0f7f2b2 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -483,7 +483,7 @@ config MACH_NEO1973_GTA02 select I2C select POWER_SUPPLY select MACH_NEO1973 - select S3C2410_PWM + select S3C24XX_PWM select S3C_DEV_USB_HOST help Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone @@ -493,7 +493,7 @@ config MACH_RX1950 select S3C24XX_DCLK select PM_H1940 if PM select I2C - select S3C2410_PWM + select S3C24XX_PWM select S3C_DEV_NAND select S3C2410_IOTIMING if S3C2440_CPUFREQ select S3C2440_XTAL_16934400 diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c index 6a2352436e6..f8e47235bab 100644 --- a/arch/arm/mach-sa1100/leds-hackkit.c +++ b/arch/arm/mach-sa1100/leds-hackkit.c @@ -10,6 +10,7 @@ * as cpu led, the green one is used as timer led. */ #include <linux/init.h> +#include <linux/io.h> #include <mach/hardware.h> #include <asm/leds.h> diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c index 8fd387bf31f..b7344beec10 100644 --- a/arch/arm/mach-tegra/board-harmony-power.c +++ b/arch/arm/mach-tegra/board-harmony-power.c @@ -51,7 +51,7 @@ static struct regulator_init_data ldo0_data = { .consumer_supplies = tps658621_ldo0_supply, }; -#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv) \ +#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv, _on)\ static struct regulator_init_data _id##_data = { \ .supply_regulator = _supply, \ .constraints = { \ @@ -63,21 +63,22 @@ static struct regulator_init_data ldo0_data = { .valid_ops_mask = (REGULATOR_CHANGE_MODE | \ REGULATOR_CHANGE_STATUS | \ REGULATOR_CHANGE_VOLTAGE), \ + .always_on = _on, \ }, \ } -HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500); -HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500); -HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550); -HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500); -HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500); -HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475); -HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300); -HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300); +HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500, 1); +HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500, 1); +HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550, 1); +HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500, 1); +HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500, 0); +HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300, 1); +HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475, 1); +HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300, 1); +HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300, 1); #define TPS_REG(_id, _data) \ { \ @@ -119,9 +120,10 @@ static struct i2c_board_info __initdata harmony_regulators[] = { int __init harmony_regulator_init(void) { + regulator_register_always_on(0, "vdd_sys", + NULL, 0, 5000000); + if (machine_is_harmony()) { - regulator_register_always_on(0, "vdd_sys", - NULL, 0, 5000000); i2c_register_board_info(3, harmony_regulators, 1); } else { /* Harmony, booted using device tree */ struct device_node *np; diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index c2cdf6500f7..4e7d1182e8a 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -358,7 +358,7 @@ void __init dma_contiguous_remap(void) if (end > arm_lowmem_limit) end = arm_lowmem_limit; if (start >= end) - return; + continue; map.pfn = __phys_to_pfn(start); map.virtual = __phys_to_virt(start); @@ -423,7 +423,7 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) unsigned int pageno; unsigned long flags; void *ptr = NULL; - size_t align; + unsigned long align_mask; if (!pool->vaddr) { WARN(1, "coherent pool not initialised!\n"); @@ -435,11 +435,11 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) * small, so align them to their order in pages, minimum is a page * size. This helps reduce fragmentation of the DMA space. */ - align = PAGE_SIZE << get_order(size); + align_mask = (1 << get_order(size)) - 1; spin_lock_irqsave(&pool->lock, flags); pageno = bitmap_find_next_zero_area(pool->bitmap, pool->nr_pages, - 0, count, (1 << align) - 1); + 0, count, align_mask); if (pageno < pool->nr_pages) { bitmap_set(pool->bitmap, pageno, count); ptr = pool->vaddr + PAGE_SIZE * pageno; @@ -648,12 +648,12 @@ void arm_dma_free(struct device *dev, size_t size, void *cpu_addr, if (arch_is_coherent() || nommu()) { __dma_free_buffer(page, size); + } else if (__free_from_pool(cpu_addr, size)) { + return; } else if (!IS_ENABLED(CONFIG_CMA)) { __dma_free_remap(cpu_addr, size); __dma_free_buffer(page, size); } else { - if (__free_from_pool(cpu_addr, size)) - return; /* * Non-atomic allocations cannot be freed with IRQs disabled */ diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 77458548e03..40ca11ed6e5 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -231,8 +231,6 @@ void __sync_icache_dcache(pte_t pteval) struct page *page; struct address_space *mapping; - if (!pte_present_user(pteval)) - return; if (cache_is_vipt_nonaliasing() && !pte_exec(pteval)) /* only flush non-aliasing VIPT caches for exec mappings */ return; diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index c2021139cb5..ea94765acf9 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -38,10 +38,10 @@ ENTRY(v7wbi_flush_user_tlb_range) dsb mov r0, r0, lsr #PAGE_SHIFT @ align address mov r1, r1, lsr #PAGE_SHIFT -#ifdef CONFIG_ARM_ERRATA_720789 - mov r3, #0 -#else asid r3, r3 @ mask ASID +#ifdef CONFIG_ARM_ERRATA_720789 + ALT_SMP(W(mov) r3, #0 ) + ALT_UP(W(nop) ) #endif orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA mov r1, r1, lsl #PAGE_SHIFT diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 7aca31c1df1..9c3b90c3538 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -403,7 +403,8 @@ config S5P_DEV_USB_EHCI config S3C24XX_PWM bool "PWM device support" - select HAVE_PWM + select PWM + select PWM_SAMSUNG help Support for exporting the PWM timer blocks via the pwm device system diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index fb849d044bd..c834b32af27 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -719,8 +719,10 @@ static int __init vfp_init(void) if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100) elf_hwcap |= HWCAP_NEON; #endif +#ifdef CONFIG_VFPv3 if ((fmrx(MVFR1) & 0xf0000000) == 0x10000000) elf_hwcap |= HWCAP_VFPv4; +#endif } } return 0; diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index ada8f0fc71e..fb96e607adc 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -52,7 +52,6 @@ EXPORT_SYMBOL(reserved_mem_dcache_on); #ifdef CONFIG_MTD_UCLINUX extern struct map_info uclinux_ram_map; unsigned long memory_mtd_end, memory_mtd_start, mtd_size; -unsigned long _ebss; EXPORT_SYMBOL(memory_mtd_end); EXPORT_SYMBOL(memory_mtd_start); EXPORT_SYMBOL(mtd_size); diff --git a/arch/c6x/Kconfig b/arch/c6x/Kconfig index 052f81a7623..983c859e40b 100644 --- a/arch/c6x/Kconfig +++ b/arch/c6x/Kconfig @@ -6,6 +6,7 @@ config C6X def_bool y select CLKDEV_LOOKUP + select GENERIC_ATOMIC64 select GENERIC_IRQ_SHOW select HAVE_ARCH_TRACEHOOK select HAVE_DMA_API_DEBUG diff --git a/arch/c6x/include/asm/cache.h b/arch/c6x/include/asm/cache.h index 6d521d96d94..09c5a0f5f4d 100644 --- a/arch/c6x/include/asm/cache.h +++ b/arch/c6x/include/asm/cache.h @@ -1,7 +1,7 @@ /* * Port on Texas Instruments TMS320C6x architecture * - * Copyright (C) 2005, 2006, 2009, 2010 Texas Instruments Incorporated + * Copyright (C) 2005, 2006, 2009, 2010, 2012 Texas Instruments Incorporated * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) * * This program is free software; you can redistribute it and/or modify @@ -16,9 +16,14 @@ /* * Cache line size */ -#define L1D_CACHE_BYTES 64 -#define L1P_CACHE_BYTES 32 -#define L2_CACHE_BYTES 128 +#define L1D_CACHE_SHIFT 6 +#define L1D_CACHE_BYTES (1 << L1D_CACHE_SHIFT) + +#define L1P_CACHE_SHIFT 5 +#define L1P_CACHE_BYTES (1 << L1P_CACHE_SHIFT) + +#define L2_CACHE_SHIFT 7 +#define L2_CACHE_BYTES (1 << L2_CACHE_SHIFT) /* * L2 used as cache @@ -29,7 +34,8 @@ * For practical reasons the L1_CACHE_BYTES defines should not be smaller than * the L2 line size */ -#define L1_CACHE_BYTES L2_CACHE_BYTES +#define L1_CACHE_SHIFT L2_CACHE_SHIFT +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) #define L2_CACHE_ALIGN_LOW(x) \ (((x) & ~(L2_CACHE_BYTES - 1))) diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig index 954d81e2e83..7913695b2fc 100644 --- a/arch/ia64/configs/generic_defconfig +++ b/arch/ia64/configs/generic_defconfig @@ -234,5 +234,4 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRC_T10DIF=y -CONFIG_MISC_DEVICES=y CONFIG_INTEL_IOMMU=y diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig index 91c41ecfa6d..f8e91336542 100644 --- a/arch/ia64/configs/gensparse_defconfig +++ b/arch/ia64/configs/gensparse_defconfig @@ -209,4 +209,3 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MUTEXES=y CONFIG_CRYPTO_MD5=y -CONFIG_MISC_DEVICES=y diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 6f38b6120d9..440578850ae 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -497,7 +497,7 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) srat_num_cpus++; } -void __init +int __init acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) { unsigned long paddr, size; @@ -512,7 +512,7 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) /* Ignore disabled entries */ if (!(ma->flags & ACPI_SRAT_MEM_ENABLED)) - return; + return -1; /* record this node in proximity bitmap */ pxm_bit_set(pxm); @@ -531,6 +531,7 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) p->size = size; p->nid = pxm; num_node_memblks++; + return 0; } void __init acpi_numa_arch_fixup(void) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 0b0f8b8c4a2..b22df9410dc 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -5,6 +5,7 @@ config M68K select HAVE_AOUT if MMU select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_SHOW + select GENERIC_ATOMIC64 select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS select GENERIC_CPU_DEVICES select GENERIC_STRNCPY_FROM_USER if MMU @@ -54,18 +55,6 @@ config ZONE_DMA bool default y -config CPU_HAS_NO_BITFIELDS - bool - -config CPU_HAS_NO_MULDIV64 - bool - -config CPU_HAS_ADDRESS_SPACES - bool - -config FPU - bool - config HZ int default 1000 if CLEOPATRA diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index 43a9f8f1b8e..c4eb79edece 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -28,6 +28,7 @@ config COLDFIRE select CPU_HAS_NO_BITFIELDS select CPU_HAS_NO_MULDIV64 select GENERIC_CSUM + select HAVE_CLK endchoice @@ -37,6 +38,7 @@ config M68000 bool select CPU_HAS_NO_BITFIELDS select CPU_HAS_NO_MULDIV64 + select CPU_HAS_NO_UNALIGNED select GENERIC_CSUM help The Freescale (was Motorola) 68000 CPU is the first generation of @@ -48,6 +50,7 @@ config M68000 config MCPU32 bool select CPU_HAS_NO_BITFIELDS + select CPU_HAS_NO_UNALIGNED help The Freescale (was then Motorola) CPU32 is a CPU core that is based on the 68020 processor. For the most part it is used in @@ -56,7 +59,6 @@ config MCPU32 config M68020 bool "68020 support" depends on MMU - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68020 @@ -67,7 +69,6 @@ config M68020 config M68030 bool "68030 support" depends on MMU && !MMU_SUN3 - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68030 @@ -77,7 +78,6 @@ config M68030 config M68040 bool "68040 support" depends on MMU && !MMU_SUN3 - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68LC040 @@ -88,7 +88,6 @@ config M68040 config M68060 bool "68060 support" depends on MMU && !MMU_SUN3 - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68060 @@ -376,6 +375,18 @@ config NODES_SHIFT default "3" depends on !SINGLE_MEMORY_CHUNK +config CPU_HAS_NO_BITFIELDS + bool + +config CPU_HAS_NO_MULDIV64 + bool + +config CPU_HAS_NO_UNALIGNED + bool + +config CPU_HAS_ADDRESS_SPACES + bool + config FPU bool diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c index 0a30406b944..f5565d6eeb8 100644 --- a/arch/m68k/apollo/config.c +++ b/arch/m68k/apollo/config.c @@ -177,8 +177,8 @@ irqreturn_t dn_timer_int(int irq, void *dev_id) timer_handler(irq, dev_id); - x=*(volatile unsigned char *)(timer+3); - x=*(volatile unsigned char *)(timer+5); + x = *(volatile unsigned char *)(apollo_timer + 3); + x = *(volatile unsigned char *)(apollo_timer + 5); return IRQ_HANDLED; } @@ -186,17 +186,17 @@ irqreturn_t dn_timer_int(int irq, void *dev_id) void dn_sched_init(irq_handler_t timer_routine) { /* program timer 1 */ - *(volatile unsigned char *)(timer+3)=0x01; - *(volatile unsigned char *)(timer+1)=0x40; - *(volatile unsigned char *)(timer+5)=0x09; - *(volatile unsigned char *)(timer+7)=0xc4; + *(volatile unsigned char *)(apollo_timer + 3) = 0x01; + *(volatile unsigned char *)(apollo_timer + 1) = 0x40; + *(volatile unsigned char *)(apollo_timer + 5) = 0x09; + *(volatile unsigned char *)(apollo_timer + 7) = 0xc4; /* enable IRQ of PIC B */ *(volatile unsigned char *)(pica+1)&=(~8); #if 0 - printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3)); - printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3)); + printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3)); + printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3)); #endif if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", timer_routine)) diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild index eafa2539a8e..a74e5d95c38 100644 --- a/arch/m68k/include/asm/Kbuild +++ b/arch/m68k/include/asm/Kbuild @@ -1,4 +1,29 @@ include include/asm-generic/Kbuild.asm header-y += cachectl.h +generic-y += bitsperlong.h +generic-y += cputime.h +generic-y += device.h +generic-y += emergency-restart.h +generic-y += errno.h +generic-y += futex.h +generic-y += ioctl.h +generic-y += ipcbuf.h +generic-y += irq_regs.h +generic-y += kdebug.h +generic-y += kmap_types.h +generic-y += kvm_para.h +generic-y += local64.h +generic-y += local.h +generic-y += mman.h +generic-y += mutex.h +generic-y += percpu.h +generic-y += resource.h +generic-y += scatterlist.h +generic-y += sections.h +generic-y += siginfo.h +generic-y += statfs.h +generic-y += topology.h +generic-y += types.h generic-y += word-at-a-time.h +generic-y += xor.h diff --git a/arch/m68k/include/asm/MC68332.h b/arch/m68k/include/asm/MC68332.h deleted file mode 100644 index 6bb8f02685a..00000000000 --- a/arch/m68k/include/asm/MC68332.h +++ /dev/null @@ -1,152 +0,0 @@ - -/* include/asm-m68knommu/MC68332.h: '332 control registers - * - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>, - * - */ - -#ifndef _MC68332_H_ -#define _MC68332_H_ - -#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) -#define WORD_REF(addr) (*((volatile unsigned short*)addr)) - -#define PORTE_ADDR 0xfffa11 -#define PORTE BYTE_REF(PORTE_ADDR) -#define DDRE_ADDR 0xfffa15 -#define DDRE BYTE_REF(DDRE_ADDR) -#define PEPAR_ADDR 0xfffa17 -#define PEPAR BYTE_REF(PEPAR_ADDR) - -#define PORTF_ADDR 0xfffa19 -#define PORTF BYTE_REF(PORTF_ADDR) -#define DDRF_ADDR 0xfffa1d -#define DDRF BYTE_REF(DDRF_ADDR) -#define PFPAR_ADDR 0xfffa1f -#define PFPAR BYTE_REF(PFPAR_ADDR) - -#define PORTQS_ADDR 0xfffc15 -#define PORTQS BYTE_REF(PORTQS_ADDR) -#define DDRQS_ADDR 0xfffc17 -#define DDRQS BYTE_REF(DDRQS_ADDR) -#define PQSPAR_ADDR 0xfffc16 -#define PQSPAR BYTE_REF(PQSPAR_ADDR) - -#define CSPAR0_ADDR 0xFFFA44 -#define CSPAR0 WORD_REF(CSPAR0_ADDR) -#define CSPAR1_ADDR 0xFFFA46 -#define CSPAR1 WORD_REF(CSPAR1_ADDR) -#define CSARBT_ADDR 0xFFFA48 -#define CSARBT WORD_REF(CSARBT_ADDR) -#define CSOPBT_ADDR 0xFFFA4A -#define CSOPBT WORD_REF(CSOPBT_ADDR) -#define CSBAR0_ADDR 0xFFFA4C -#define CSBAR0 WORD_REF(CSBAR0_ADDR) -#define CSOR0_ADDR 0xFFFA4E -#define CSOR0 WORD_REF(CSOR0_ADDR) -#define CSBAR1_ADDR 0xFFFA50 -#define CSBAR1 WORD_REF(CSBAR1_ADDR) -#define CSOR1_ADDR 0xFFFA52 -#define CSOR1 WORD_REF(CSOR1_ADDR) -#define CSBAR2_ADDR 0xFFFA54 -#define CSBAR2 WORD_REF(CSBAR2_ADDR) -#define CSOR2_ADDR 0xFFFA56 -#define CSOR2 WORD_REF(CSOR2_ADDR) -#define CSBAR3_ADDR 0xFFFA58 -#define CSBAR3 WORD_REF(CSBAR3_ADDR) -#define CSOR3_ADDR 0xFFFA5A -#define CSOR3 WORD_REF(CSOR3_ADDR) -#define CSBAR4_ADDR 0xFFFA5C -#define CSBAR4 WORD_REF(CSBAR4_ADDR) -#define CSOR4_ADDR 0xFFFA5E -#define CSOR4 WORD_REF(CSOR4_ADDR) -#define CSBAR5_ADDR 0xFFFA60 -#define CSBAR5 WORD_REF(CSBAR5_ADDR) -#define CSOR5_ADDR 0xFFFA62 -#define CSOR5 WORD_REF(CSOR5_ADDR) -#define CSBAR6_ADDR 0xFFFA64 -#define CSBAR6 WORD_REF(CSBAR6_ADDR) -#define CSOR6_ADDR 0xFFFA66 -#define CSOR6 WORD_REF(CSOR6_ADDR) -#define CSBAR7_ADDR 0xFFFA68 -#define CSBAR7 WORD_REF(CSBAR7_ADDR) -#define CSOR7_ADDR 0xFFFA6A -#define CSOR7 WORD_REF(CSOR7_ADDR) -#define CSBAR8_ADDR 0xFFFA6C -#define CSBAR8 WORD_REF(CSBAR8_ADDR) -#define CSOR8_ADDR 0xFFFA6E -#define CSOR8 WORD_REF(CSOR8_ADDR) -#define CSBAR9_ADDR 0xFFFA70 -#define CSBAR9 WORD_REF(CSBAR9_ADDR) -#define CSOR9_ADDR 0xFFFA72 -#define CSOR9 WORD_REF(CSOR9_ADDR) -#define CSBAR10_ADDR 0xFFFA74 -#define CSBAR10 WORD_REF(CSBAR10_ADDR) -#define CSOR10_ADDR 0xFFFA76 -#define CSOR10 WORD_REF(CSOR10_ADDR) - -#define CSOR_MODE_ASYNC 0x0000 -#define CSOR_MODE_SYNC 0x8000 -#define CSOR_MODE_MASK 0x8000 -#define CSOR_BYTE_DISABLE 0x0000 -#define CSOR_BYTE_UPPER 0x4000 -#define CSOR_BYTE_LOWER 0x2000 -#define CSOR_BYTE_BOTH 0x6000 -#define CSOR_BYTE_MASK 0x6000 -#define CSOR_RW_RSVD 0x0000 -#define CSOR_RW_READ 0x0800 -#define CSOR_RW_WRITE 0x1000 -#define CSOR_RW_BOTH 0x1800 -#define CSOR_RW_MASK 0x1800 -#define CSOR_STROBE_DS 0x0400 -#define CSOR_STROBE_AS 0x0000 -#define CSOR_STROBE_MASK 0x0400 -#define CSOR_DSACK_WAIT(x) (wait << 6) -#define CSOR_DSACK_FTERM (14 << 6) -#define CSOR_DSACK_EXTERNAL (15 << 6) -#define CSOR_DSACK_MASK 0x03c0 -#define CSOR_SPACE_CPU 0x0000 -#define CSOR_SPACE_USER 0x0010 -#define CSOR_SPACE_SU 0x0020 -#define CSOR_SPACE_BOTH 0x0030 -#define CSOR_SPACE_MASK 0x0030 -#define CSOR_IPL_ALL 0x0000 -#define CSOR_IPL_PRIORITY(x) (x << 1) -#define CSOR_IPL_MASK 0x000e -#define CSOR_AVEC_ON 0x0001 -#define CSOR_AVEC_OFF 0x0000 -#define CSOR_AVEC_MASK 0x0001 - -#define CSBAR_ADDR(x) ((addr >> 11) << 3) -#define CSBAR_ADDR_MASK 0xfff8 -#define CSBAR_BLKSIZE_2K 0x0000 -#define CSBAR_BLKSIZE_8K 0x0001 -#define CSBAR_BLKSIZE_16K 0x0002 -#define CSBAR_BLKSIZE_64K 0x0003 -#define CSBAR_BLKSIZE_128K 0x0004 -#define CSBAR_BLKSIZE_256K 0x0005 -#define CSBAR_BLKSIZE_512K 0x0006 -#define CSBAR_BLKSIZE_1M 0x0007 -#define CSBAR_BLKSIZE_MASK 0x0007 - -#define CSPAR_DISC 0 -#define CSPAR_ALT 1 -#define CSPAR_CS8 2 -#define CSPAR_CS16 3 -#define CSPAR_MASK 3 - -#define CSPAR0_CSBOOT(x) (x << 0) -#define CSPAR0_CS0(x) (x << 2) -#define CSPAR0_CS1(x) (x << 4) -#define CSPAR0_CS2(x) (x << 6) -#define CSPAR0_CS3(x) (x << 8) -#define CSPAR0_CS4(x) (x << 10) -#define CSPAR0_CS5(x) (x << 12) - -#define CSPAR1_CS6(x) (x << 0) -#define CSPAR1_CS7(x) (x << 2) -#define CSPAR1_CS8(x) (x << 4) -#define CSPAR1_CS9(x) (x << 6) -#define CSPAR1_CS10(x) (x << 8) - -#endif diff --git a/arch/m68k/include/asm/apollodma.h b/arch/m68k/include/asm/apollodma.h deleted file mode 100644 index 954adc851ad..00000000000 --- a/arch/m68k/include/asm/apollodma.h +++ /dev/null @@ -1,248 +0,0 @@ -/* - * linux/include/asm/dma.h: Defines for using and allocating dma channels. - * Written by Hennus Bergman, 1992. - * High DMA channel support & info by Hannu Savolainen - * and John Boyd, Nov. 1992. - */ - -#ifndef _ASM_APOLLO_DMA_H -#define _ASM_APOLLO_DMA_H - -#include <asm/apollohw.h> /* need byte IO */ -#include <linux/spinlock.h> /* And spinlocks */ -#include <linux/delay.h> - - -#define dma_outb(val,addr) (*((volatile unsigned char *)(addr+IO_BASE)) = (val)) -#define dma_inb(addr) (*((volatile unsigned char *)(addr+IO_BASE))) - -/* - * NOTES about DMA transfers: - * - * controller 1: channels 0-3, byte operations, ports 00-1F - * controller 2: channels 4-7, word operations, ports C0-DF - * - * - ALL registers are 8 bits only, regardless of transfer size - * - channel 4 is not used - cascades 1 into 2. - * - channels 0-3 are byte - addresses/counts are for physical bytes - * - channels 5-7 are word - addresses/counts are for physical words - * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries - * - transfer count loaded to registers is 1 less than actual count - * - controller 2 offsets are all even (2x offsets for controller 1) - * - page registers for 5-7 don't use data bit 0, represent 128K pages - * - page registers for 0-3 use bit 0, represent 64K pages - * - * DMA transfers are limited to the lower 16MB of _physical_ memory. - * Note that addresses loaded into registers must be _physical_ addresses, - * not logical addresses (which may differ if paging is active). - * - * Address mapping for channels 0-3: - * - * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * P7 ... P0 A7 ... A0 A7 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Address mapping for channels 5-7: - * - * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) - * | ... | \ \ ... \ \ \ ... \ \ - * | ... | \ \ ... \ \ \ ... \ (not used) - * | ... | \ \ ... \ \ \ ... \ - * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses - * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at - * the hardware level, so odd-byte transfers aren't possible). - * - * Transfer count (_not # bytes_) is limited to 64K, represented as actual - * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more, - * and up to 128K bytes may be transferred on channels 5-7 in one operation. - * - */ - -#define MAX_DMA_CHANNELS 8 - -/* The maximum address that we can perform a DMA transfer to on this platform */#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x1000000) - -/* 8237 DMA controllers */ -#define IO_DMA1_BASE 0x10C00 /* 8 bit slave DMA, channels 0..3 */ -#define IO_DMA2_BASE 0x10D00 /* 16 bit master DMA, ch 4(=slave input)..7 */ - -/* DMA controller registers */ -#define DMA1_CMD_REG (IO_DMA1_BASE+0x08) /* command register (w) */ -#define DMA1_STAT_REG (IO_DMA1_BASE+0x08) /* status register (r) */ -#define DMA1_REQ_REG (IO_DMA1_BASE+0x09) /* request register (w) */ -#define DMA1_MASK_REG (IO_DMA1_BASE+0x0A) /* single-channel mask (w) */ -#define DMA1_MODE_REG (IO_DMA1_BASE+0x0B) /* mode register (w) */ -#define DMA1_CLEAR_FF_REG (IO_DMA1_BASE+0x0C) /* clear pointer flip-flop (w) */ -#define DMA1_TEMP_REG (IO_DMA1_BASE+0x0D) /* Temporary Register (r) */ -#define DMA1_RESET_REG (IO_DMA1_BASE+0x0D) /* Master Clear (w) */ -#define DMA1_CLR_MASK_REG (IO_DMA1_BASE+0x0E) /* Clear Mask */ -#define DMA1_MASK_ALL_REG (IO_DMA1_BASE+0x0F) /* all-channels mask (w) */ - -#define DMA2_CMD_REG (IO_DMA2_BASE+0x10) /* command register (w) */ -#define DMA2_STAT_REG (IO_DMA2_BASE+0x10) /* status register (r) */ -#define DMA2_REQ_REG (IO_DMA2_BASE+0x12) /* request register (w) */ -#define DMA2_MASK_REG (IO_DMA2_BASE+0x14) /* single-channel mask (w) */ -#define DMA2_MODE_REG (IO_DMA2_BASE+0x16) /* mode register (w) */ -#define DMA2_CLEAR_FF_REG (IO_DMA2_BASE+0x18) /* clear pointer flip-flop (w) */ -#define DMA2_TEMP_REG (IO_DMA2_BASE+0x1A) /* Temporary Register (r) */ -#define DMA2_RESET_REG (IO_DMA2_BASE+0x1A) /* Master Clear (w) */ -#define DMA2_CLR_MASK_REG (IO_DMA2_BASE+0x1C) /* Clear Mask */ -#define DMA2_MASK_ALL_REG (IO_DMA2_BASE+0x1E) /* all-channels mask (w) */ - -#define DMA_ADDR_0 (IO_DMA1_BASE+0x00) /* DMA address registers */ -#define DMA_ADDR_1 (IO_DMA1_BASE+0x02) -#define DMA_ADDR_2 (IO_DMA1_BASE+0x04) -#define DMA_ADDR_3 (IO_DMA1_BASE+0x06) -#define DMA_ADDR_4 (IO_DMA2_BASE+0x00) -#define DMA_ADDR_5 (IO_DMA2_BASE+0x04) -#define DMA_ADDR_6 (IO_DMA2_BASE+0x08) -#define DMA_ADDR_7 (IO_DMA2_BASE+0x0C) - -#define DMA_CNT_0 (IO_DMA1_BASE+0x01) /* DMA count registers */ -#define DMA_CNT_1 (IO_DMA1_BASE+0x03) -#define DMA_CNT_2 (IO_DMA1_BASE+0x05) -#define DMA_CNT_3 (IO_DMA1_BASE+0x07) -#define DMA_CNT_4 (IO_DMA2_BASE+0x02) -#define DMA_CNT_5 (IO_DMA2_BASE+0x06) -#define DMA_CNT_6 (IO_DMA2_BASE+0x0A) -#define DMA_CNT_7 (IO_DMA2_BASE+0x0E) - -#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */ -#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */ -#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ - -#define DMA_AUTOINIT 0x10 - -#define DMA_8BIT 0 -#define DMA_16BIT 1 -#define DMA_BUSMASTER 2 - -extern spinlock_t dma_spin_lock; - -static __inline__ unsigned long claim_dma_lock(void) -{ - unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); - return flags; -} - -static __inline__ void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(dmanr, DMA1_MASK_REG); - else - dma_outb(dmanr & 3, DMA2_MASK_REG); -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(dmanr | 4, DMA1_MASK_REG); - else - dma_outb((dmanr & 3) | 4, DMA2_MASK_REG); -} - -/* Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while holding the DMA lock ! --- - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(0, DMA1_CLEAR_FF_REG); - else - dma_outb(0, DMA2_CLEAR_FF_REG); -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - if (dmanr<=3) - dma_outb(mode | dmanr, DMA1_MODE_REG); - else - dma_outb(mode | (dmanr&3), DMA2_MODE_REG); -} - -/* Set transfer address & page bits for specific DMA channel. - * Assumes dma flipflop is clear. - */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ - if (dmanr <= 3) { - dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); - dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); - } else { - dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); - dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); - } -} - - -/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for - * a specific DMA channel. - * You must ensure the parameters are valid. - * NOTE: from a manual: "the number of transfers is one more - * than the initial word count"! This is taken into account. - * Assumes dma flip-flop is clear. - * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - count--; - if (dmanr <= 3) { - dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); - dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); - } else { - dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); - dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); - } -} - - -/* Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * If called before the channel has been used, it may return 1. - * Otherwise, it returns the number of _bytes_ left to transfer. - * - * Assumes DMA flip-flop is clear. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE - : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE; - - /* using short to get 16-bit wrap around */ - unsigned short count; - - count = 1 + dma_inb(io_port); - count += dma_inb(io_port) << 8; - - return (dmanr<=3)? count : (count<<1); -} - - -/* These are in kernel/dma.c: */ -extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ -extern void free_dma(unsigned int dmanr); /* release it again */ - -/* These are in arch/m68k/apollo/dma.c: */ -extern unsigned short dma_map_page(unsigned long phys_addr,int count,int type); -extern void dma_unmap_page(unsigned short dma_addr); - -#endif /* _ASM_APOLLO_DMA_H */ diff --git a/arch/m68k/include/asm/apollohw.h b/arch/m68k/include/asm/apollohw.h index a1373b9aa28..635ef4f8901 100644 --- a/arch/m68k/include/asm/apollohw.h +++ b/arch/m68k/include/asm/apollohw.h @@ -98,7 +98,7 @@ extern u_long timer_physaddr; #define cpuctrl (*(volatile unsigned int *)(IO_BASE + cpuctrl_physaddr)) #define pica (IO_BASE + pica_physaddr) #define picb (IO_BASE + picb_physaddr) -#define timer (IO_BASE + timer_physaddr) +#define apollo_timer (IO_BASE + timer_physaddr) #define addr_xlat_map ((unsigned short *)(IO_BASE + 0x17000)) #define isaIO2mem(x) (((((x) & 0x3f8) << 7) | (((x) & 0xfc00) >> 6) | ((x) & 0x7)) + 0x40000 + IO_BASE) diff --git a/arch/m68k/include/asm/bitsperlong.h b/arch/m68k/include/asm/bitsperlong.h deleted file mode 100644 index 6dc0bb0c13b..00000000000 --- a/arch/m68k/include/asm/bitsperlong.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/bitsperlong.h> diff --git a/arch/m68k/include/asm/cputime.h b/arch/m68k/include/asm/cputime.h deleted file mode 100644 index c79c5e89230..00000000000 --- a/arch/m68k/include/asm/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __M68K_CPUTIME_H -#define __M68K_CPUTIME_H - -#include <asm-generic/cputime.h> - -#endif /* __M68K_CPUTIME_H */ diff --git a/arch/m68k/include/asm/delay.h b/arch/m68k/include/asm/delay.h index 9c09becfd4c..12d8fe4f1d3 100644 --- a/arch/m68k/include/asm/delay.h +++ b/arch/m68k/include/asm/delay.h @@ -43,7 +43,7 @@ static inline void __delay(unsigned long loops) extern void __bad_udelay(void); -#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE) +#ifdef CONFIG_CPU_HAS_NO_MULDIV64 /* * The simpler m68k and ColdFire processors do not have a 32*32->64 * multiply instruction. So we need to handle them a little differently. diff --git a/arch/m68k/include/asm/device.h b/arch/m68k/include/asm/device.h deleted file mode 100644 index d8f9872b0e2..00000000000 --- a/arch/m68k/include/asm/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include <asm-generic/device.h> - diff --git a/arch/m68k/include/asm/emergency-restart.h b/arch/m68k/include/asm/emergency-restart.h deleted file mode 100644 index 108d8c48e42..00000000000 --- a/arch/m68k/include/asm/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include <asm-generic/emergency-restart.h> - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/m68k/include/asm/errno.h b/arch/m68k/include/asm/errno.h deleted file mode 100644 index 0d4e188d6ef..00000000000 --- a/arch/m68k/include/asm/errno.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_ERRNO_H -#define _M68K_ERRNO_H - -#include <asm-generic/errno.h> - -#endif /* _M68K_ERRNO_H */ diff --git a/arch/m68k/include/asm/futex.h b/arch/m68k/include/asm/futex.h deleted file mode 100644 index 6a332a9f099..00000000000 --- a/arch/m68k/include/asm/futex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#include <asm-generic/futex.h> - -#endif diff --git a/arch/m68k/include/asm/ioctl.h b/arch/m68k/include/asm/ioctl.h deleted file mode 100644 index b279fe06dfe..00000000000 --- a/arch/m68k/include/asm/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/ioctl.h> diff --git a/arch/m68k/include/asm/ipcbuf.h b/arch/m68k/include/asm/ipcbuf.h deleted file mode 100644 index 84c7e51cb6d..00000000000 --- a/arch/m68k/include/asm/ipcbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/ipcbuf.h> diff --git a/arch/m68k/include/asm/irq_regs.h b/arch/m68k/include/asm/irq_regs.h deleted file mode 100644 index 3dd9c0b7027..00000000000 --- a/arch/m68k/include/asm/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/irq_regs.h> diff --git a/arch/m68k/include/asm/kdebug.h b/arch/m68k/include/asm/kdebug.h deleted file mode 100644 index 6ece1b03766..00000000000 --- a/arch/m68k/include/asm/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/kdebug.h> diff --git a/arch/m68k/include/asm/kmap_types.h b/arch/m68k/include/asm/kmap_types.h deleted file mode 100644 index 3413cc1390e..00000000000 --- a/arch/m68k/include/asm/kmap_types.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_M68K_KMAP_TYPES_H -#define __ASM_M68K_KMAP_TYPES_H - -#include <asm-generic/kmap_types.h> - -#endif /* __ASM_M68K_KMAP_TYPES_H */ diff --git a/arch/m68k/include/asm/kvm_para.h b/arch/m68k/include/asm/kvm_para.h deleted file mode 100644 index 14fab8f0b95..00000000000 --- a/arch/m68k/include/asm/kvm_para.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/kvm_para.h> diff --git a/arch/m68k/include/asm/local.h b/arch/m68k/include/asm/local.h deleted file mode 100644 index 6c259263e1f..00000000000 --- a/arch/m68k/include/asm/local.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M68K_LOCAL_H -#define _ASM_M68K_LOCAL_H - -#include <asm-generic/local.h> - -#endif /* _ASM_M68K_LOCAL_H */ diff --git a/arch/m68k/include/asm/local64.h b/arch/m68k/include/asm/local64.h deleted file mode 100644 index 36c93b5cc23..00000000000 --- a/arch/m68k/include/asm/local64.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/local64.h> diff --git a/arch/m68k/include/asm/mac_mouse.h b/arch/m68k/include/asm/mac_mouse.h deleted file mode 100644 index 39a5c292eae..00000000000 --- a/arch/m68k/include/asm/mac_mouse.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _ASM_MAC_MOUSE_H -#define _ASM_MAC_MOUSE_H - -/* - * linux/include/asm-m68k/mac_mouse.h - * header file for Macintosh ADB mouse driver - * 27-10-97 Michael Schmitz - * copied from: - * header file for Atari Mouse driver - * by Robert de Vries (robert@and.nl) on 19Jul93 - */ - -struct mouse_status { - char buttons; - short dx; - short dy; - int ready; - int active; - wait_queue_head_t wait; - struct fasync_struct *fasyncptr; -}; - -#endif diff --git a/arch/m68k/include/asm/mcfmbus.h b/arch/m68k/include/asm/mcfmbus.h deleted file mode 100644 index 319899c47a2..00000000000 --- a/arch/m68k/include/asm/mcfmbus.h +++ /dev/null @@ -1,77 +0,0 @@ -/****************************************************************************/ - -/* - * mcfmbus.h -- Coldfire MBUS support defines. - * - * (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de) - */ - -/****************************************************************************/ - - -#ifndef mcfmbus_h -#define mcfmbus_h - - -#define MCFMBUS_BASE 0x280 -#define MCFMBUS_IRQ_VECTOR 0x19 -#define MCFMBUS_IRQ 0x1 -#define MCFMBUS_CLK 0x3f -#define MCFMBUS_IRQ_LEVEL 0x07 /*IRQ Level 1*/ -#define MCFMBUS_ADDRESS 0x01 - - -/* -* Define the 5307 MBUS register set addresses -*/ - -#define MCFMBUS_MADR 0x00 -#define MCFMBUS_MFDR 0x04 -#define MCFMBUS_MBCR 0x08 -#define MCFMBUS_MBSR 0x0C -#define MCFMBUS_MBDR 0x10 - - -#define MCFMBUS_MADR_ADDR(a) (((a)&0x7F)<<0x01) /*Slave Address*/ - -#define MCFMBUS_MFDR_MBC(a) ((a)&0x3F) /*M-Bus Clock*/ - -/* -* Define bit flags in Control Register -*/ - -#define MCFMBUS_MBCR_MEN (0x80) /* M-Bus Enable */ -#define MCFMBUS_MBCR_MIEN (0x40) /* M-Bus Interrupt Enable */ -#define MCFMBUS_MBCR_MSTA (0x20) /* Master/Slave Mode Select Bit */ -#define MCFMBUS_MBCR_MTX (0x10) /* Transmit/Rcv Mode Select Bit */ -#define MCFMBUS_MBCR_TXAK (0x08) /* Transmit Acknowledge Enable */ -#define MCFMBUS_MBCR_RSTA (0x04) /* Repeat Start */ - -/* -* Define bit flags in Status Register -*/ - -#define MCFMBUS_MBSR_MCF (0x80) /* Data Transfer Complete */ -#define MCFMBUS_MBSR_MAAS (0x40) /* Addressed as a Slave */ -#define MCFMBUS_MBSR_MBB (0x20) /* Bus Busy */ -#define MCFMBUS_MBSR_MAL (0x10) /* Arbitration Lost */ -#define MCFMBUS_MBSR_SRW (0x04) /* Slave Transmit */ -#define MCFMBUS_MBSR_MIF (0x02) /* M-Bus Interrupt */ -#define MCFMBUS_MBSR_RXAK (0x01) /* No Acknowledge Received */ - -/* -* Define bit flags in DATA I/O Register -*/ - -#define MCFMBUS_MBDR_READ (0x01) /* 1=read 0=write MBUS */ - -#define MBUSIOCSCLOCK 1 -#define MBUSIOCGCLOCK 2 -#define MBUSIOCSADDR 3 -#define MBUSIOCGADDR 4 -#define MBUSIOCSSLADDR 5 -#define MBUSIOCGSLADDR 6 -#define MBUSIOCSSUBADDR 7 -#define MBUSIOCGSUBADDR 8 - -#endif diff --git a/arch/m68k/include/asm/mman.h b/arch/m68k/include/asm/mman.h deleted file mode 100644 index 8eebf89f5ab..00000000000 --- a/arch/m68k/include/asm/mman.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/mman.h> diff --git a/arch/m68k/include/asm/mutex.h b/arch/m68k/include/asm/mutex.h deleted file mode 100644 index 458c1f7fbc1..00000000000 --- a/arch/m68k/include/asm/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include <asm-generic/mutex-dec.h> diff --git a/arch/m68k/include/asm/percpu.h b/arch/m68k/include/asm/percpu.h deleted file mode 100644 index 0859d048faf..00000000000 --- a/arch/m68k/include/asm/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_M68K_PERCPU_H -#define __ASM_M68K_PERCPU_H - -#include <asm-generic/percpu.h> - -#endif /* __ASM_M68K_PERCPU_H */ diff --git a/arch/m68k/include/asm/resource.h b/arch/m68k/include/asm/resource.h deleted file mode 100644 index e7d35019f33..00000000000 --- a/arch/m68k/include/asm/resource.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_RESOURCE_H -#define _M68K_RESOURCE_H - -#include <asm-generic/resource.h> - -#endif /* _M68K_RESOURCE_H */ diff --git a/arch/m68k/include/asm/sbus.h b/arch/m68k/include/asm/sbus.h deleted file mode 100644 index bfe3ba147f2..00000000000 --- a/arch/m68k/include/asm/sbus.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * some sbus structures and macros to make usage of sbus drivers possible - */ - -#ifndef __M68K_SBUS_H -#define __M68K_SBUS_H - -struct sbus_dev { - struct { - unsigned int which_io; - unsigned int phys_addr; - } reg_addrs[1]; -}; - -/* sbus IO functions stolen from include/asm-sparc/io.h for the serial driver */ -/* No SBUS on the Sun3, kludge -- sam */ - -static inline void _sbus_writeb(unsigned char val, unsigned long addr) -{ - *(volatile unsigned char *)addr = val; -} - -static inline unsigned char _sbus_readb(unsigned long addr) -{ - return *(volatile unsigned char *)addr; -} - -static inline void _sbus_writel(unsigned long val, unsigned long addr) -{ - *(volatile unsigned long *)addr = val; - -} - -extern inline unsigned long _sbus_readl(unsigned long addr) -{ - return *(volatile unsigned long *)addr; -} - - -#define sbus_readb(a) _sbus_readb((unsigned long)a) -#define sbus_writeb(v, a) _sbus_writeb(v, (unsigned long)a) -#define sbus_readl(a) _sbus_readl((unsigned long)a) -#define sbus_writel(v, a) _sbus_writel(v, (unsigned long)a) - -#endif diff --git a/arch/m68k/include/asm/scatterlist.h b/arch/m68k/include/asm/scatterlist.h deleted file mode 100644 index 312505452a1..00000000000 --- a/arch/m68k/include/asm/scatterlist.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_SCATTERLIST_H -#define _M68K_SCATTERLIST_H - -#include <asm-generic/scatterlist.h> - -#endif /* !(_M68K_SCATTERLIST_H) */ diff --git a/arch/m68k/include/asm/sections.h b/arch/m68k/include/asm/sections.h deleted file mode 100644 index 5277e52715e..00000000000 --- a/arch/m68k/include/asm/sections.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _ASM_M68K_SECTIONS_H -#define _ASM_M68K_SECTIONS_H - -#include <asm-generic/sections.h> - -extern char _sbss[], _ebss[]; - -#endif /* _ASM_M68K_SECTIONS_H */ diff --git a/arch/m68k/include/asm/shm.h b/arch/m68k/include/asm/shm.h deleted file mode 100644 index fa56ec84a12..00000000000 --- a/arch/m68k/include/asm/shm.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _M68K_SHM_H -#define _M68K_SHM_H - - -/* format of page table entries that correspond to shared memory pages - currently out in swap space (see also mm/swap.c): - bits 0-1 (PAGE_PRESENT) is = 0 - bits 8..2 (SWP_TYPE) are = SHM_SWP_TYPE - bits 31..9 are used like this: - bits 15..9 (SHM_ID) the id of the shared memory segment - bits 30..16 (SHM_IDX) the index of the page within the shared memory segment - (actually only bits 25..16 get used since SHMMAX is so low) - bit 31 (SHM_READ_ONLY) flag whether the page belongs to a read-only attach -*/ -/* on the m68k both bits 0 and 1 must be zero */ -/* format on the sun3 is similar, but bits 30, 31 are set to zero and all - others are reduced by 2. --m */ - -#ifndef CONFIG_SUN3 -#define SHM_ID_SHIFT 9 -#else -#define SHM_ID_SHIFT 7 -#endif -#define _SHM_ID_BITS 7 -#define SHM_ID_MASK ((1<<_SHM_ID_BITS)-1) - -#define SHM_IDX_SHIFT (SHM_ID_SHIFT+_SHM_ID_BITS) -#define _SHM_IDX_BITS 15 -#define SHM_IDX_MASK ((1<<_SHM_IDX_BITS)-1) - -#endif /* _M68K_SHM_H */ diff --git a/arch/m68k/include/asm/siginfo.h b/arch/m68k/include/asm/siginfo.h deleted file mode 100644 index 851d3d784b5..00000000000 --- a/arch/m68k/include/asm/siginfo.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_SIGINFO_H -#define _M68K_SIGINFO_H - -#include <asm-generic/siginfo.h> - -#endif diff --git a/arch/m68k/include/asm/statfs.h b/arch/m68k/include/asm/statfs.h deleted file mode 100644 index 08d93f14e06..00000000000 --- a/arch/m68k/include/asm/statfs.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_STATFS_H -#define _M68K_STATFS_H - -#include <asm-generic/statfs.h> - -#endif /* _M68K_STATFS_H */ diff --git a/arch/m68k/include/asm/topology.h b/arch/m68k/include/asm/topology.h deleted file mode 100644 index ca173e9f26f..00000000000 --- a/arch/m68k/include/asm/topology.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M68K_TOPOLOGY_H -#define _ASM_M68K_TOPOLOGY_H - -#include <asm-generic/topology.h> - -#endif /* _ASM_M68K_TOPOLOGY_H */ diff --git a/arch/m68k/include/asm/types.h b/arch/m68k/include/asm/types.h deleted file mode 100644 index 89705adcbd5..00000000000 --- a/arch/m68k/include/asm/types.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _M68K_TYPES_H -#define _M68K_TYPES_H - -/* - * This file is never included by application software unless - * explicitly requested (e.g., via linux/types.h) in which case the - * application is Linux specific so (user-) name space pollution is - * not a major issue. However, for interoperability, libraries still - * need to be careful to avoid a name clashes. - */ -#include <asm-generic/int-ll64.h> - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#endif /* __KERNEL__ */ - -#endif /* _M68K_TYPES_H */ diff --git a/arch/m68k/include/asm/unaligned.h b/arch/m68k/include/asm/unaligned.h index f4043ae63db..2b3ca0bf7a0 100644 --- a/arch/m68k/include/asm/unaligned.h +++ b/arch/m68k/include/asm/unaligned.h @@ -2,7 +2,7 @@ #define _ASM_M68K_UNALIGNED_H -#if defined(CONFIG_COLDFIRE) || defined(CONFIG_M68000) +#ifdef CONFIG_CPU_HAS_NO_UNALIGNED #include <linux/unaligned/be_struct.h> #include <linux/unaligned/le_byteshift.h> #include <linux/unaligned/generic.h> @@ -12,7 +12,7 @@ #else /* - * The m68k can do unaligned accesses itself. + * The m68k can do unaligned accesses itself. */ #include <linux/unaligned/access_ok.h> #include <linux/unaligned/generic.h> diff --git a/arch/m68k/include/asm/xor.h b/arch/m68k/include/asm/xor.h deleted file mode 100644 index c82eb12a5b1..00000000000 --- a/arch/m68k/include/asm/xor.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/xor.h> diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c index 7dc186b7a85..71fb29938db 100644 --- a/arch/m68k/kernel/setup_no.c +++ b/arch/m68k/kernel/setup_no.c @@ -218,13 +218,10 @@ void __init setup_arch(char **cmdline_p) printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n"); #endif - pr_debug("KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x " - "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext, - (int) &_sdata, (int) &_edata, - (int) &_sbss, (int) &_ebss); - pr_debug("MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ", - (int) &_ebss, (int) memory_start, - (int) memory_start, (int) memory_end); + pr_debug("KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p BSS=0x%p-0x%p\n", + _stext, _etext, _sdata, _edata, __bss_start, __bss_stop); + pr_debug("MEMORY -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx\n ", + __bss_stop, memory_start, memory_start, memory_end); /* Keep a copy of command line */ *cmdline_p = &command_line[0]; diff --git a/arch/m68k/kernel/sys_m68k.c b/arch/m68k/kernel/sys_m68k.c index 8623f8dc16f..9a5932ec368 100644 --- a/arch/m68k/kernel/sys_m68k.c +++ b/arch/m68k/kernel/sys_m68k.c @@ -479,9 +479,13 @@ sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5, goto bad_access; } - mem_value = *mem; + /* + * No need to check for EFAULT; we know that the page is + * present and writable. + */ + __get_user(mem_value, mem); if (mem_value == oldval) - *mem = newval; + __put_user(newval, mem); pte_unmap_unlock(pte, ptl); up_read(&mm->mmap_sem); diff --git a/arch/m68k/kernel/vmlinux-nommu.lds b/arch/m68k/kernel/vmlinux-nommu.lds index 40e02d9c38b..06a763f49fd 100644 --- a/arch/m68k/kernel/vmlinux-nommu.lds +++ b/arch/m68k/kernel/vmlinux-nommu.lds @@ -78,9 +78,7 @@ SECTIONS { __init_end = .; } - _sbss = .; BSS_SECTION(0, 0, 0) - _ebss = .; _end = .; diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds index 63407c83682..d0993594f55 100644 --- a/arch/m68k/kernel/vmlinux-std.lds +++ b/arch/m68k/kernel/vmlinux-std.lds @@ -31,9 +31,7 @@ SECTIONS RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE) - _sbss = .; BSS_SECTION(0, 0, 0) - _ebss = .; _edata = .; /* End of data section */ diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds index ad0f46d64c0..8080469ee6c 100644 --- a/arch/m68k/kernel/vmlinux-sun3.lds +++ b/arch/m68k/kernel/vmlinux-sun3.lds @@ -44,9 +44,7 @@ __init_begin = .; . = ALIGN(PAGE_SIZE); __init_end = .; - _sbss = .; BSS_SECTION(0, 0, 0) - _ebss = .; _end = . ; diff --git a/arch/m68k/lib/muldi3.c b/arch/m68k/lib/muldi3.c index 79e928a525d..ee5f0b1b5c5 100644 --- a/arch/m68k/lib/muldi3.c +++ b/arch/m68k/lib/muldi3.c @@ -19,7 +19,7 @@ along with GNU CC; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ -#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE) +#ifdef CONFIG_CPU_HAS_NO_MULDIV64 #define SI_TYPE_SIZE 32 #define __BITS4 (SI_TYPE_SIZE / 4) diff --git a/arch/m68k/mm/init_mm.c b/arch/m68k/mm/init_mm.c index f77f258dce3..282f9de6896 100644 --- a/arch/m68k/mm/init_mm.c +++ b/arch/m68k/mm/init_mm.c @@ -104,7 +104,7 @@ void __init print_memmap(void) MLK_ROUNDUP(__init_begin, __init_end), MLK_ROUNDUP(_stext, _etext), MLK_ROUNDUP(_sdata, _edata), - MLK_ROUNDUP(_sbss, _ebss)); + MLK_ROUNDUP(__bss_start, __bss_stop)); } void __init mem_init(void) diff --git a/arch/m68k/mm/init_no.c b/arch/m68k/mm/init_no.c index 345ec0d83e3..688e3664aea 100644 --- a/arch/m68k/mm/init_no.c +++ b/arch/m68k/mm/init_no.c @@ -91,7 +91,7 @@ void __init mem_init(void) totalram_pages = free_all_bootmem(); codek = (_etext - _stext) >> 10; - datak = (_ebss - _sdata) >> 10; + datak = (__bss_stop - _sdata) >> 10; initk = (__init_begin - __init_end) >> 10; tmp = nr_free_pages() << PAGE_SHIFT; diff --git a/arch/m68k/platform/68328/head-de2.S b/arch/m68k/platform/68328/head-de2.S index f632fdcb93e..537d3245b53 100644 --- a/arch/m68k/platform/68328/head-de2.S +++ b/arch/m68k/platform/68328/head-de2.S @@ -60,8 +60,8 @@ _start: * Move ROM filesystem above bss :-) */ - moveal #_sbss, %a0 /* romfs at the start of bss */ - moveal #_ebss, %a1 /* Set up destination */ + moveal #__bss_start, %a0 /* romfs at the start of bss */ + moveal #__bss_stop, %a1 /* Set up destination */ movel %a0, %a2 /* Copy of bss start */ movel 8(%a0), %d1 /* Get size of ROMFS */ @@ -84,8 +84,8 @@ _start: * Initialize BSS segment to 0 */ - lea _sbss, %a0 - lea _ebss, %a1 + lea __bss_start, %a0 + lea __bss_stop, %a1 /* Copy 0 to %a0 until %a0 == %a1 */ 2: cmpal %a0, %a1 diff --git a/arch/m68k/platform/68328/head-pilot.S b/arch/m68k/platform/68328/head-pilot.S index 2ebfd642081..45a9dad29e3 100644 --- a/arch/m68k/platform/68328/head-pilot.S +++ b/arch/m68k/platform/68328/head-pilot.S @@ -110,7 +110,7 @@ L0: movel #CONFIG_VECTORBASE, %d7 addl #16, %d7 moveal %d7, %a0 - moveal #_ebss, %a1 + moveal #__bss_stop, %a1 lea %a1@(512), %a2 DBG_PUTC('C') @@ -138,8 +138,8 @@ LD1: DBG_PUTC('E') - moveal #_sbss, %a0 - moveal #_ebss, %a1 + moveal #__bss_start, %a0 + moveal #__bss_stop, %a1 /* Copy 0 to %a0 until %a0 == %a1 */ L1: @@ -150,7 +150,7 @@ L1: DBG_PUTC('F') /* Copy command line from end of bss to command line */ - moveal #_ebss, %a0 + moveal #__bss_stop, %a0 moveal #command_line, %a1 lea %a1@(512), %a2 @@ -165,7 +165,7 @@ L3: movel #_sdata, %d0 movel %d0, _rambase - movel #_ebss, %d0 + movel #__bss_stop, %d0 movel %d0, _ramstart movel %a4, %d0 diff --git a/arch/m68k/platform/68328/head-ram.S b/arch/m68k/platform/68328/head-ram.S index 7f1aeeacb21..5189ef92609 100644 --- a/arch/m68k/platform/68328/head-ram.S +++ b/arch/m68k/platform/68328/head-ram.S @@ -76,8 +76,8 @@ pclp3: beq pclp3 #endif /* DEBUG */ moveal #0x007ffff0, %ssp - moveal #_sbss, %a0 - moveal #_ebss, %a1 + moveal #__bss_start, %a0 + moveal #__bss_stop, %a1 /* Copy 0 to %a0 until %a0 >= %a1 */ L1: diff --git a/arch/m68k/platform/68328/head-rom.S b/arch/m68k/platform/68328/head-rom.S index a5ff96d0295..3dff98ba2e9 100644 --- a/arch/m68k/platform/68328/head-rom.S +++ b/arch/m68k/platform/68328/head-rom.S @@ -59,8 +59,8 @@ _stext: movew #0x2700,%sr cmpal %a1, %a2 bhi 1b - moveal #_sbss, %a0 - moveal #_ebss, %a1 + moveal #__bss_start, %a0 + moveal #__bss_stop, %a1 /* Copy 0 to %a0 until %a0 == %a1 */ 1: @@ -70,7 +70,7 @@ _stext: movew #0x2700,%sr movel #_sdata, %d0 movel %d0, _rambase - movel #_ebss, %d0 + movel #__bss_stop, %d0 movel %d0, _ramstart movel #RAMEND-CONFIG_MEMORY_RESERVE*0x100000, %d0 movel %d0, _ramend diff --git a/arch/m68k/platform/68360/head-ram.S b/arch/m68k/platform/68360/head-ram.S index 8eb94fb6b97..acd213170d8 100644 --- a/arch/m68k/platform/68360/head-ram.S +++ b/arch/m68k/platform/68360/head-ram.S @@ -219,8 +219,8 @@ LD1: cmp.l #_edata, %a1 blt LD1 - moveal #_sbss, %a0 - moveal #_ebss, %a1 + moveal #__bss_start, %a0 + moveal #__bss_stop, %a1 /* Copy 0 to %a0 until %a0 == %a1 */ L1: @@ -234,7 +234,7 @@ load_quicc: store_ram_size: /* Set ram size information */ move.l #_sdata, _rambase - move.l #_ebss, _ramstart + move.l #__bss_stop, _ramstart move.l #RAMEND, %d0 sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/ move.l %d0, _ramend /* Different from RAMEND.*/ diff --git a/arch/m68k/platform/68360/head-rom.S b/arch/m68k/platform/68360/head-rom.S index 97510e55b80..dfc756d9988 100644 --- a/arch/m68k/platform/68360/head-rom.S +++ b/arch/m68k/platform/68360/head-rom.S @@ -13,7 +13,7 @@ */ .global _stext -.global _sbss +.global __bss_start .global _start .global _rambase @@ -229,8 +229,8 @@ LD1: cmp.l #_edata, %a1 blt LD1 - moveal #_sbss, %a0 - moveal #_ebss, %a1 + moveal #__bss_start, %a0 + moveal #__bss_stop, %a1 /* Copy 0 to %a0 until %a0 == %a1 */ L1: @@ -244,7 +244,7 @@ load_quicc: store_ram_size: /* Set ram size information */ move.l #_sdata, _rambase - move.l #_ebss, _ramstart + move.l #__bss_stop, _ramstart move.l #RAMEND, %d0 sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/ move.l %d0, _ramend /* Different from RAMEND.*/ diff --git a/arch/m68k/platform/coldfire/head.S b/arch/m68k/platform/coldfire/head.S index 4e0c9eb3bd1..b88f5716f35 100644 --- a/arch/m68k/platform/coldfire/head.S +++ b/arch/m68k/platform/coldfire/head.S @@ -230,8 +230,8 @@ _vstart: /* * Move ROM filesystem above bss :-) */ - lea _sbss,%a0 /* get start of bss */ - lea _ebss,%a1 /* set up destination */ + lea __bss_start,%a0 /* get start of bss */ + lea __bss_stop,%a1 /* set up destination */ movel %a0,%a2 /* copy of bss start */ movel 8(%a0),%d0 /* get size of ROMFS */ @@ -249,7 +249,7 @@ _copy_romfs: bne _copy_romfs #else /* CONFIG_ROMFS_FS */ - lea _ebss,%a1 + lea __bss_stop,%a1 movel %a1,_ramstart #endif /* CONFIG_ROMFS_FS */ @@ -257,8 +257,8 @@ _copy_romfs: /* * Zero out the bss region. */ - lea _sbss,%a0 /* get start of bss */ - lea _ebss,%a1 /* get end of bss */ + lea __bss_start,%a0 /* get start of bss */ + lea __bss_stop,%a1 /* get end of bss */ clrl %d0 /* set value */ _clear_bss: movel %d0,(%a0)+ /* clear each word */ diff --git a/arch/m68k/sun3/prom/init.c b/arch/m68k/sun3/prom/init.c index d8e6349336b..eeba067d565 100644 --- a/arch/m68k/sun3/prom/init.c +++ b/arch/m68k/sun3/prom/init.c @@ -22,57 +22,13 @@ int prom_root_node; struct linux_nodeops *prom_nodeops; /* You must call prom_init() before you attempt to use any of the - * routines in the prom library. It returns 0 on success, 1 on - * failure. It gets passed the pointer to the PROM vector. + * routines in the prom library. + * It gets passed the pointer to the PROM vector. */ -extern void prom_meminit(void); -extern void prom_ranges_init(void); - void __init prom_init(struct linux_romvec *rp) { romvec = rp; -#ifndef CONFIG_SUN3 - switch(romvec->pv_romvers) { - case 0: - prom_vers = PROM_V0; - break; - case 2: - prom_vers = PROM_V2; - break; - case 3: - prom_vers = PROM_V3; - break; - case 4: - prom_vers = PROM_P1275; - prom_printf("PROMLIB: Sun IEEE Prom not supported yet\n"); - prom_halt(); - break; - default: - prom_printf("PROMLIB: Bad PROM version %d\n", - romvec->pv_romvers); - prom_halt(); - break; - }; - - prom_rev = romvec->pv_plugin_revision; - prom_prev = romvec->pv_printrev; - prom_nodeops = romvec->pv_nodeops; - - prom_root_node = prom_getsibling(0); - if((prom_root_node == 0) || (prom_root_node == -1)) - prom_halt(); - - if((((unsigned long) prom_nodeops) == 0) || - (((unsigned long) prom_nodeops) == -1)) - prom_halt(); - - prom_meminit(); - - prom_ranges_init(); -#endif -// printk("PROMLIB: Sun Boot Prom Version %d Revision %d\n", -// romvec->pv_romvers, prom_rev); /* Initialization successful. */ return; diff --git a/arch/microblaze/include/asm/sections.h b/arch/microblaze/include/asm/sections.h index 4487e150b45..c07ed5d2a82 100644 --- a/arch/microblaze/include/asm/sections.h +++ b/arch/microblaze/include/asm/sections.h @@ -18,10 +18,6 @@ extern char _ssbss[], _esbss[]; extern unsigned long __ivt_start[], __ivt_end[]; extern char _etext[], _stext[]; -# ifdef CONFIG_MTD_UCLINUX -extern char *_ebss; -# endif - extern u32 _fdt_start[], _fdt_end[]; # endif /* !__ASSEMBLY__ */ diff --git a/arch/microblaze/kernel/microblaze_ksyms.c b/arch/microblaze/kernel/microblaze_ksyms.c index bb4907c828d..2b25bcf05c0 100644 --- a/arch/microblaze/kernel/microblaze_ksyms.c +++ b/arch/microblaze/kernel/microblaze_ksyms.c @@ -21,9 +21,6 @@ #include <linux/ftrace.h> #include <linux/uaccess.h> -extern char *_ebss; -EXPORT_SYMBOL_GPL(_ebss); - #ifdef CONFIG_FUNCTION_TRACER extern void _mcount(void); EXPORT_SYMBOL(_mcount); diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 16d8dfd9094..4da971d4392 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -121,7 +121,7 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, /* Move ROMFS out of BSS before clearing it */ if (romfs_size > 0) { - memmove(&_ebss, (int *)romfs_base, romfs_size); + memmove(&__bss_stop, (int *)romfs_base, romfs_size); klimit += romfs_size; } #endif @@ -165,7 +165,7 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, BUG_ON(romfs_size < 0); /* What else can we do? */ printk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n", - romfs_size, romfs_base, (unsigned)&_ebss); + romfs_size, romfs_base, (unsigned)&__bss_stop); printk("New klimit: 0x%08x\n", (unsigned)klimit); #endif diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index 109e9d86ade..936d01a689d 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -131,7 +131,6 @@ SECTIONS { *(COMMON) . = ALIGN (4) ; __bss_stop = . ; - _ebss = . ; } . = ALIGN(PAGE_SIZE); _end = .; diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 76de6b68487..107610e01a2 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -124,6 +124,7 @@ config S390 select GENERIC_TIME_VSYSCALL select GENERIC_CLOCKEVENTS select KTIME_SCALAR if 32BIT + select HAVE_ARCH_SECCOMP_FILTER config SCHED_OMIT_FRAME_POINTER def_bool y diff --git a/arch/s390/include/asm/sparsemem.h b/arch/s390/include/asm/sparsemem.h index 0fb34027d3f..a60d085ddb4 100644 --- a/arch/s390/include/asm/sparsemem.h +++ b/arch/s390/include/asm/sparsemem.h @@ -4,13 +4,11 @@ #ifdef CONFIG_64BIT #define SECTION_SIZE_BITS 28 -#define MAX_PHYSADDR_BITS 46 #define MAX_PHYSMEM_BITS 46 #else #define SECTION_SIZE_BITS 25 -#define MAX_PHYSADDR_BITS 31 #define MAX_PHYSMEM_BITS 31 #endif /* CONFIG_64BIT */ diff --git a/arch/s390/include/asm/syscall.h b/arch/s390/include/asm/syscall.h index fb214dd9b7e..fe7b99759e1 100644 --- a/arch/s390/include/asm/syscall.h +++ b/arch/s390/include/asm/syscall.h @@ -12,6 +12,7 @@ #ifndef _ASM_SYSCALL_H #define _ASM_SYSCALL_H 1 +#include <linux/audit.h> #include <linux/sched.h> #include <linux/err.h> #include <asm/ptrace.h> @@ -87,4 +88,13 @@ static inline void syscall_set_arguments(struct task_struct *task, regs->orig_gpr2 = args[0]; } +static inline int syscall_get_arch(struct task_struct *task, + struct pt_regs *regs) +{ +#ifdef CONFIG_COMPAT + if (test_tsk_thread_flag(task, TIF_31BIT)) + return AUDIT_ARCH_S390; +#endif + return sizeof(long) == 8 ? AUDIT_ARCH_S390X : AUDIT_ARCH_S390; +} #endif /* _ASM_SYSCALL_H */ diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index d1225089a4b..f606d935f49 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -620,7 +620,6 @@ asmlinkage unsigned long old32_mmap(struct mmap_arg_struct_emu31 __user *arg) return -EFAULT; if (a.offset & ~PAGE_MASK) return -EINVAL; - a.addr = (unsigned long) compat_ptr(a.addr); return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); } @@ -631,7 +630,6 @@ asmlinkage long sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg) if (copy_from_user(&a, arg, sizeof(a))) return -EFAULT; - a.addr = (unsigned long) compat_ptr(a.addr); return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset); } diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index e835d6d5b7f..2d82cfcbce5 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1635,7 +1635,7 @@ ENTRY(compat_sys_process_vm_readv_wrapper) llgfr %r6,%r6 # unsigned long llgf %r0,164(%r15) # unsigned long stg %r0,160(%r15) - jg sys_process_vm_readv + jg compat_sys_process_vm_readv ENTRY(compat_sys_process_vm_writev_wrapper) lgfr %r2,%r2 # compat_pid_t @@ -1645,4 +1645,4 @@ ENTRY(compat_sys_process_vm_writev_wrapper) llgfr %r6,%r6 # unsigned long llgf %r0,164(%r15) # unsigned long stg %r0,160(%r15) - jg sys_process_vm_writev + jg compat_sys_process_vm_writev diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index f4eb37680b9..e4be113fbac 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -719,7 +719,11 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) long ret = 0; /* Do the secure computing check first. */ - secure_computing_strict(regs->gprs[2]); + if (secure_computing(regs->gprs[2])) { + /* seccomp failures shouldn't expose any additional code. */ + ret = -1; + goto out; + } /* * The sysc_tracesys code in entry.S stored the system @@ -745,6 +749,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) regs->gprs[2], regs->orig_gpr2, regs->gprs[3], regs->gprs[4], regs->gprs[5]); +out: return ret ?: regs->gprs[2]; } diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c index b4a29eee41b..d0964d22adb 100644 --- a/arch/s390/kernel/sys_s390.c +++ b/arch/s390/kernel/sys_s390.c @@ -81,11 +81,12 @@ SYSCALL_DEFINE1(s390_personality, unsigned int, personality) { unsigned int ret; - if (current->personality == PER_LINUX32 && personality == PER_LINUX) - personality = PER_LINUX32; + if (personality(current->personality) == PER_LINUX32 && + personality(personality) == PER_LINUX) + personality |= PER_LINUX32; ret = sys_personality(personality); - if (ret == PER_LINUX32) - ret = PER_LINUX; + if (personality(ret) == PER_LINUX32) + ret &= ~PER_LINUX32; return ret; } diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index 4c171f13b0e..b2256562314 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -335,7 +335,7 @@ static int dmae_irq_init(void) for (n = 0; n < NR_DMAE; n++) { int i = request_irq(get_dma_error_irq(n), dma_err, - IRQF_SHARED, dmae_name[n], NULL); + IRQF_SHARED, dmae_name[n], (void *)dmae_name[n]); if (unlikely(i < 0)) { printk(KERN_ERR "%s request_irq fail\n", dmae_name[n]); return i; diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h index 4a5350037c8..1b6199740e9 100644 --- a/arch/sh/include/asm/sections.h +++ b/arch/sh/include/asm/sections.h @@ -6,7 +6,6 @@ extern long __nosave_begin, __nosave_end; extern long __machvec_start, __machvec_end; extern char __uncached_start, __uncached_end; -extern char _ebss[]; extern char __start_eh_frame[], __stop_eh_frame[]; #endif /* __ASM_SH_SECTIONS_H */ diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7269.h b/arch/sh/include/cpu-sh2a/cpu/sh7269.h index 48d14498e77..2a0ca8780f0 100644 --- a/arch/sh/include/cpu-sh2a/cpu/sh7269.h +++ b/arch/sh/include/cpu-sh2a/cpu/sh7269.h @@ -183,18 +183,30 @@ enum { GPIO_FN_DV_DATA1, GPIO_FN_DV_DATA0, GPIO_FN_LCD_CLK, GPIO_FN_LCD_EXTCLK, GPIO_FN_LCD_VSYNC, GPIO_FN_LCD_HSYNC, GPIO_FN_LCD_DE, - GPIO_FN_LCD_DATA23, GPIO_FN_LCD_DATA22, - GPIO_FN_LCD_DATA21, GPIO_FN_LCD_DATA20, - GPIO_FN_LCD_DATA19, GPIO_FN_LCD_DATA18, - GPIO_FN_LCD_DATA17, GPIO_FN_LCD_DATA16, - GPIO_FN_LCD_DATA15, GPIO_FN_LCD_DATA14, - GPIO_FN_LCD_DATA13, GPIO_FN_LCD_DATA12, - GPIO_FN_LCD_DATA11, GPIO_FN_LCD_DATA10, - GPIO_FN_LCD_DATA9, GPIO_FN_LCD_DATA8, - GPIO_FN_LCD_DATA7, GPIO_FN_LCD_DATA6, - GPIO_FN_LCD_DATA5, GPIO_FN_LCD_DATA4, - GPIO_FN_LCD_DATA3, GPIO_FN_LCD_DATA2, - GPIO_FN_LCD_DATA1, GPIO_FN_LCD_DATA0, + GPIO_FN_LCD_DATA23_PG23, GPIO_FN_LCD_DATA22_PG22, + GPIO_FN_LCD_DATA21_PG21, GPIO_FN_LCD_DATA20_PG20, + GPIO_FN_LCD_DATA19_PG19, GPIO_FN_LCD_DATA18_PG18, + GPIO_FN_LCD_DATA17_PG17, GPIO_FN_LCD_DATA16_PG16, + GPIO_FN_LCD_DATA15_PG15, GPIO_FN_LCD_DATA14_PG14, + GPIO_FN_LCD_DATA13_PG13, GPIO_FN_LCD_DATA12_PG12, + GPIO_FN_LCD_DATA11_PG11, GPIO_FN_LCD_DATA10_PG10, + GPIO_FN_LCD_DATA9_PG9, GPIO_FN_LCD_DATA8_PG8, + GPIO_FN_LCD_DATA7_PG7, GPIO_FN_LCD_DATA6_PG6, + GPIO_FN_LCD_DATA5_PG5, GPIO_FN_LCD_DATA4_PG4, + GPIO_FN_LCD_DATA3_PG3, GPIO_FN_LCD_DATA2_PG2, + GPIO_FN_LCD_DATA1_PG1, GPIO_FN_LCD_DATA0_PG0, + GPIO_FN_LCD_DATA23_PJ23, GPIO_FN_LCD_DATA22_PJ22, + GPIO_FN_LCD_DATA21_PJ21, GPIO_FN_LCD_DATA20_PJ20, + GPIO_FN_LCD_DATA19_PJ19, GPIO_FN_LCD_DATA18_PJ18, + GPIO_FN_LCD_DATA17_PJ17, GPIO_FN_LCD_DATA16_PJ16, + GPIO_FN_LCD_DATA15_PJ15, GPIO_FN_LCD_DATA14_PJ14, + GPIO_FN_LCD_DATA13_PJ13, GPIO_FN_LCD_DATA12_PJ12, + GPIO_FN_LCD_DATA11_PJ11, GPIO_FN_LCD_DATA10_PJ10, + GPIO_FN_LCD_DATA9_PJ9, GPIO_FN_LCD_DATA8_PJ8, + GPIO_FN_LCD_DATA7_PJ7, GPIO_FN_LCD_DATA6_PJ6, + GPIO_FN_LCD_DATA5_PJ5, GPIO_FN_LCD_DATA4_PJ4, + GPIO_FN_LCD_DATA3_PJ3, GPIO_FN_LCD_DATA2_PJ2, + GPIO_FN_LCD_DATA1_PJ1, GPIO_FN_LCD_DATA0_PJ0, GPIO_FN_LCD_M_DISP, }; diff --git a/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c b/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c index f25127c46ec..039e4587dd9 100644 --- a/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c +++ b/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c @@ -758,12 +758,22 @@ enum { DV_DATA3_MARK, DV_DATA2_MARK, DV_DATA1_MARK, DV_DATA0_MARK, LCD_CLK_MARK, LCD_EXTCLK_MARK, LCD_VSYNC_MARK, LCD_HSYNC_MARK, LCD_DE_MARK, - LCD_DATA23_MARK, LCD_DATA22_MARK, LCD_DATA21_MARK, LCD_DATA20_MARK, - LCD_DATA19_MARK, LCD_DATA18_MARK, LCD_DATA17_MARK, LCD_DATA16_MARK, - LCD_DATA15_MARK, LCD_DATA14_MARK, LCD_DATA13_MARK, LCD_DATA12_MARK, - LCD_DATA11_MARK, LCD_DATA10_MARK, LCD_DATA9_MARK, LCD_DATA8_MARK, - LCD_DATA7_MARK, LCD_DATA6_MARK, LCD_DATA5_MARK, LCD_DATA4_MARK, - LCD_DATA3_MARK, LCD_DATA2_MARK, LCD_DATA1_MARK, LCD_DATA0_MARK, + LCD_DATA23_PG23_MARK, LCD_DATA22_PG22_MARK, LCD_DATA21_PG21_MARK, + LCD_DATA20_PG20_MARK, LCD_DATA19_PG19_MARK, LCD_DATA18_PG18_MARK, + LCD_DATA17_PG17_MARK, LCD_DATA16_PG16_MARK, LCD_DATA15_PG15_MARK, + LCD_DATA14_PG14_MARK, LCD_DATA13_PG13_MARK, LCD_DATA12_PG12_MARK, + LCD_DATA11_PG11_MARK, LCD_DATA10_PG10_MARK, LCD_DATA9_PG9_MARK, + LCD_DATA8_PG8_MARK, LCD_DATA7_PG7_MARK, LCD_DATA6_PG6_MARK, + LCD_DATA5_PG5_MARK, LCD_DATA4_PG4_MARK, LCD_DATA3_PG3_MARK, + LCD_DATA2_PG2_MARK, LCD_DATA1_PG1_MARK, LCD_DATA0_PG0_MARK, + LCD_DATA23_PJ23_MARK, LCD_DATA22_PJ22_MARK, LCD_DATA21_PJ21_MARK, + LCD_DATA20_PJ20_MARK, LCD_DATA19_PJ19_MARK, LCD_DATA18_PJ18_MARK, + LCD_DATA17_PJ17_MARK, LCD_DATA16_PJ16_MARK, LCD_DATA15_PJ15_MARK, + LCD_DATA14_PJ14_MARK, LCD_DATA13_PJ13_MARK, LCD_DATA12_PJ12_MARK, + LCD_DATA11_PJ11_MARK, LCD_DATA10_PJ10_MARK, LCD_DATA9_PJ9_MARK, + LCD_DATA8_PJ8_MARK, LCD_DATA7_PJ7_MARK, LCD_DATA6_PJ6_MARK, + LCD_DATA5_PJ5_MARK, LCD_DATA4_PJ4_MARK, LCD_DATA3_PJ3_MARK, + LCD_DATA2_PJ2_MARK, LCD_DATA1_PJ1_MARK, LCD_DATA0_PJ0_MARK, LCD_TCON6_MARK, LCD_TCON5_MARK, LCD_TCON4_MARK, LCD_TCON3_MARK, LCD_TCON2_MARK, LCD_TCON1_MARK, LCD_TCON0_MARK, LCD_M_DISP_MARK, @@ -1036,6 +1046,7 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PF1_DATA, PF1MD_000), PINMUX_DATA(BACK_MARK, PF1MD_001), + PINMUX_DATA(SSL10_MARK, PF1MD_011), PINMUX_DATA(TIOC4B_MARK, PF1MD_100), PINMUX_DATA(DACK0_MARK, PF1MD_101), @@ -1049,47 +1060,50 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PG27_DATA, PG27MD_00), PINMUX_DATA(LCD_TCON2_MARK, PG27MD_10), PINMUX_DATA(LCD_EXTCLK_MARK, PG27MD_11), + PINMUX_DATA(LCD_DE_MARK, PG27MD_11), PINMUX_DATA(PG26_DATA, PG26MD_00), PINMUX_DATA(LCD_TCON1_MARK, PG26MD_10), + PINMUX_DATA(LCD_HSYNC_MARK, PG26MD_10), PINMUX_DATA(PG25_DATA, PG25MD_00), PINMUX_DATA(LCD_TCON0_MARK, PG25MD_10), + PINMUX_DATA(LCD_VSYNC_MARK, PG25MD_10), PINMUX_DATA(PG24_DATA, PG24MD_00), PINMUX_DATA(LCD_CLK_MARK, PG24MD_10), PINMUX_DATA(PG23_DATA, PG23MD_000), - PINMUX_DATA(LCD_DATA23_MARK, PG23MD_010), + PINMUX_DATA(LCD_DATA23_PG23_MARK, PG23MD_010), PINMUX_DATA(LCD_TCON6_MARK, PG23MD_011), PINMUX_DATA(TXD5_MARK, PG23MD_100), PINMUX_DATA(PG22_DATA, PG22MD_000), - PINMUX_DATA(LCD_DATA22_MARK, PG22MD_010), + PINMUX_DATA(LCD_DATA22_PG22_MARK, PG22MD_010), PINMUX_DATA(LCD_TCON5_MARK, PG22MD_011), PINMUX_DATA(RXD5_MARK, PG22MD_100), PINMUX_DATA(PG21_DATA, PG21MD_000), PINMUX_DATA(DV_DATA7_MARK, PG21MD_001), - PINMUX_DATA(LCD_DATA21_MARK, PG21MD_010), + PINMUX_DATA(LCD_DATA21_PG21_MARK, PG21MD_010), PINMUX_DATA(LCD_TCON4_MARK, PG21MD_011), PINMUX_DATA(TXD4_MARK, PG21MD_100), PINMUX_DATA(PG20_DATA, PG20MD_000), PINMUX_DATA(DV_DATA6_MARK, PG20MD_001), - PINMUX_DATA(LCD_DATA20_MARK, PG21MD_010), + PINMUX_DATA(LCD_DATA20_PG20_MARK, PG21MD_010), PINMUX_DATA(LCD_TCON3_MARK, PG20MD_011), PINMUX_DATA(RXD4_MARK, PG20MD_100), PINMUX_DATA(PG19_DATA, PG19MD_000), PINMUX_DATA(DV_DATA5_MARK, PG19MD_001), - PINMUX_DATA(LCD_DATA19_MARK, PG19MD_010), + PINMUX_DATA(LCD_DATA19_PG19_MARK, PG19MD_010), PINMUX_DATA(SPDIF_OUT_MARK, PG19MD_011), PINMUX_DATA(SCK5_MARK, PG19MD_100), PINMUX_DATA(PG18_DATA, PG18MD_000), PINMUX_DATA(DV_DATA4_MARK, PG18MD_001), - PINMUX_DATA(LCD_DATA18_MARK, PG18MD_010), + PINMUX_DATA(LCD_DATA18_PG18_MARK, PG18MD_010), PINMUX_DATA(SPDIF_IN_MARK, PG18MD_011), PINMUX_DATA(SCK4_MARK, PG18MD_100), @@ -1097,103 +1111,103 @@ static pinmux_enum_t pinmux_data[] = { // we're going with 2 bits PINMUX_DATA(PG17_DATA, PG17MD_00), PINMUX_DATA(WE3ICIOWRAHDQMUU_MARK, PG17MD_01), - PINMUX_DATA(LCD_DATA17_MARK, PG17MD_10), + PINMUX_DATA(LCD_DATA17_PG17_MARK, PG17MD_10), // TODO hardware manual has PG16 3 bits wide in reg picture and 2 bits in description // we're going with 2 bits PINMUX_DATA(PG16_DATA, PG16MD_00), PINMUX_DATA(WE2ICIORDDQMUL_MARK, PG16MD_01), - PINMUX_DATA(LCD_DATA16_MARK, PG16MD_10), + PINMUX_DATA(LCD_DATA16_PG16_MARK, PG16MD_10), PINMUX_DATA(PG15_DATA, PG15MD_00), PINMUX_DATA(D31_MARK, PG15MD_01), - PINMUX_DATA(LCD_DATA15_MARK, PG15MD_10), + PINMUX_DATA(LCD_DATA15_PG15_MARK, PG15MD_10), PINMUX_DATA(PINT7_PG_MARK, PG15MD_11), PINMUX_DATA(PG14_DATA, PG14MD_00), PINMUX_DATA(D30_MARK, PG14MD_01), - PINMUX_DATA(LCD_DATA14_MARK, PG14MD_10), + PINMUX_DATA(LCD_DATA14_PG14_MARK, PG14MD_10), PINMUX_DATA(PINT6_PG_MARK, PG14MD_11), PINMUX_DATA(PG13_DATA, PG13MD_00), PINMUX_DATA(D29_MARK, PG13MD_01), - PINMUX_DATA(LCD_DATA13_MARK, PG13MD_10), + PINMUX_DATA(LCD_DATA13_PG13_MARK, PG13MD_10), PINMUX_DATA(PINT5_PG_MARK, PG13MD_11), PINMUX_DATA(PG12_DATA, PG12MD_00), PINMUX_DATA(D28_MARK, PG12MD_01), - PINMUX_DATA(LCD_DATA12_MARK, PG12MD_10), + PINMUX_DATA(LCD_DATA12_PG12_MARK, PG12MD_10), PINMUX_DATA(PINT4_PG_MARK, PG12MD_11), PINMUX_DATA(PG11_DATA, PG11MD_000), PINMUX_DATA(D27_MARK, PG11MD_001), - PINMUX_DATA(LCD_DATA11_MARK, PG11MD_010), + PINMUX_DATA(LCD_DATA11_PG11_MARK, PG11MD_010), PINMUX_DATA(PINT3_PG_MARK, PG11MD_011), PINMUX_DATA(TIOC3D_MARK, PG11MD_100), PINMUX_DATA(PG10_DATA, PG10MD_000), PINMUX_DATA(D26_MARK, PG10MD_001), - PINMUX_DATA(LCD_DATA10_MARK, PG10MD_010), + PINMUX_DATA(LCD_DATA10_PG10_MARK, PG10MD_010), PINMUX_DATA(PINT2_PG_MARK, PG10MD_011), PINMUX_DATA(TIOC3C_MARK, PG10MD_100), PINMUX_DATA(PG9_DATA, PG9MD_000), PINMUX_DATA(D25_MARK, PG9MD_001), - PINMUX_DATA(LCD_DATA9_MARK, PG9MD_010), + PINMUX_DATA(LCD_DATA9_PG9_MARK, PG9MD_010), PINMUX_DATA(PINT1_PG_MARK, PG9MD_011), PINMUX_DATA(TIOC3B_MARK, PG9MD_100), PINMUX_DATA(PG8_DATA, PG8MD_000), PINMUX_DATA(D24_MARK, PG8MD_001), - PINMUX_DATA(LCD_DATA8_MARK, PG8MD_010), + PINMUX_DATA(LCD_DATA8_PG8_MARK, PG8MD_010), PINMUX_DATA(PINT0_PG_MARK, PG8MD_011), PINMUX_DATA(TIOC3A_MARK, PG8MD_100), PINMUX_DATA(PG7_DATA, PG7MD_000), PINMUX_DATA(D23_MARK, PG7MD_001), - PINMUX_DATA(LCD_DATA7_MARK, PG7MD_010), + PINMUX_DATA(LCD_DATA7_PG7_MARK, PG7MD_010), PINMUX_DATA(IRQ7_PG_MARK, PG7MD_011), PINMUX_DATA(TIOC2B_MARK, PG7MD_100), PINMUX_DATA(PG6_DATA, PG6MD_000), PINMUX_DATA(D22_MARK, PG6MD_001), - PINMUX_DATA(LCD_DATA6_MARK, PG6MD_010), + PINMUX_DATA(LCD_DATA6_PG6_MARK, PG6MD_010), PINMUX_DATA(IRQ6_PG_MARK, PG6MD_011), PINMUX_DATA(TIOC2A_MARK, PG6MD_100), PINMUX_DATA(PG5_DATA, PG5MD_000), PINMUX_DATA(D21_MARK, PG5MD_001), - PINMUX_DATA(LCD_DATA5_MARK, PG5MD_010), + PINMUX_DATA(LCD_DATA5_PG5_MARK, PG5MD_010), PINMUX_DATA(IRQ5_PG_MARK, PG5MD_011), PINMUX_DATA(TIOC1B_MARK, PG5MD_100), PINMUX_DATA(PG4_DATA, PG4MD_000), PINMUX_DATA(D20_MARK, PG4MD_001), - PINMUX_DATA(LCD_DATA4_MARK, PG4MD_010), + PINMUX_DATA(LCD_DATA4_PG4_MARK, PG4MD_010), PINMUX_DATA(IRQ4_PG_MARK, PG4MD_011), PINMUX_DATA(TIOC1A_MARK, PG4MD_100), PINMUX_DATA(PG3_DATA, PG3MD_000), PINMUX_DATA(D19_MARK, PG3MD_001), - PINMUX_DATA(LCD_DATA3_MARK, PG3MD_010), + PINMUX_DATA(LCD_DATA3_PG3_MARK, PG3MD_010), PINMUX_DATA(IRQ3_PG_MARK, PG3MD_011), PINMUX_DATA(TIOC0D_MARK, PG3MD_100), PINMUX_DATA(PG2_DATA, PG2MD_000), PINMUX_DATA(D18_MARK, PG2MD_001), - PINMUX_DATA(LCD_DATA2_MARK, PG2MD_010), + PINMUX_DATA(LCD_DATA2_PG2_MARK, PG2MD_010), PINMUX_DATA(IRQ2_PG_MARK, PG2MD_011), PINMUX_DATA(TIOC0C_MARK, PG2MD_100), PINMUX_DATA(PG1_DATA, PG1MD_000), PINMUX_DATA(D17_MARK, PG1MD_001), - PINMUX_DATA(LCD_DATA1_MARK, PG1MD_010), + PINMUX_DATA(LCD_DATA1_PG1_MARK, PG1MD_010), PINMUX_DATA(IRQ1_PG_MARK, PG1MD_011), PINMUX_DATA(TIOC0B_MARK, PG1MD_100), PINMUX_DATA(PG0_DATA, PG0MD_000), PINMUX_DATA(D16_MARK, PG0MD_001), - PINMUX_DATA(LCD_DATA0_MARK, PG0MD_010), + PINMUX_DATA(LCD_DATA0_PG0_MARK, PG0MD_010), PINMUX_DATA(IRQ0_PG_MARK, PG0MD_011), PINMUX_DATA(TIOC0A_MARK, PG0MD_100), @@ -1275,14 +1289,14 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PJ23_DATA, PJ23MD_000), PINMUX_DATA(DV_DATA23_MARK, PJ23MD_001), - PINMUX_DATA(LCD_DATA23_MARK, PJ23MD_010), + PINMUX_DATA(LCD_DATA23_PJ23_MARK, PJ23MD_010), PINMUX_DATA(LCD_TCON6_MARK, PJ23MD_011), PINMUX_DATA(IRQ3_PJ_MARK, PJ23MD_100), PINMUX_DATA(CTX1_MARK, PJ23MD_101), PINMUX_DATA(PJ22_DATA, PJ22MD_000), PINMUX_DATA(DV_DATA22_MARK, PJ22MD_001), - PINMUX_DATA(LCD_DATA22_MARK, PJ22MD_010), + PINMUX_DATA(LCD_DATA22_PJ22_MARK, PJ22MD_010), PINMUX_DATA(LCD_TCON5_MARK, PJ22MD_011), PINMUX_DATA(IRQ2_PJ_MARK, PJ22MD_100), PINMUX_DATA(CRX1_MARK, PJ22MD_101), @@ -1290,14 +1304,14 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PJ21_DATA, PJ21MD_000), PINMUX_DATA(DV_DATA21_MARK, PJ21MD_001), - PINMUX_DATA(LCD_DATA21_MARK, PJ21MD_010), + PINMUX_DATA(LCD_DATA21_PJ21_MARK, PJ21MD_010), PINMUX_DATA(LCD_TCON4_MARK, PJ21MD_011), PINMUX_DATA(IRQ1_PJ_MARK, PJ21MD_100), PINMUX_DATA(CTX2_MARK, PJ21MD_101), PINMUX_DATA(PJ20_DATA, PJ20MD_000), PINMUX_DATA(DV_DATA20_MARK, PJ20MD_001), - PINMUX_DATA(LCD_DATA20_MARK, PJ20MD_010), + PINMUX_DATA(LCD_DATA20_PJ20_MARK, PJ20MD_010), PINMUX_DATA(LCD_TCON3_MARK, PJ20MD_011), PINMUX_DATA(IRQ0_PJ_MARK, PJ20MD_100), PINMUX_DATA(CRX2_MARK, PJ20MD_101), @@ -1305,7 +1319,7 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PJ19_DATA, PJ19MD_000), PINMUX_DATA(DV_DATA19_MARK, PJ19MD_001), - PINMUX_DATA(LCD_DATA19_MARK, PJ19MD_010), + PINMUX_DATA(LCD_DATA19_PJ19_MARK, PJ19MD_010), PINMUX_DATA(MISO0_PJ19_MARK, PJ19MD_011), PINMUX_DATA(TIOC0D_MARK, PJ19MD_100), PINMUX_DATA(SIOFRXD_MARK, PJ19MD_101), @@ -1313,126 +1327,126 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PJ18_DATA, PJ18MD_000), PINMUX_DATA(DV_DATA18_MARK, PJ18MD_001), - PINMUX_DATA(LCD_DATA18_MARK, PJ18MD_010), + PINMUX_DATA(LCD_DATA18_PJ18_MARK, PJ18MD_010), PINMUX_DATA(MOSI0_PJ18_MARK, PJ18MD_011), PINMUX_DATA(TIOC0C_MARK, PJ18MD_100), PINMUX_DATA(SIOFTXD_MARK, PJ18MD_101), PINMUX_DATA(PJ17_DATA, PJ17MD_000), PINMUX_DATA(DV_DATA17_MARK, PJ17MD_001), - PINMUX_DATA(LCD_DATA17_MARK, PJ17MD_010), + PINMUX_DATA(LCD_DATA17_PJ17_MARK, PJ17MD_010), PINMUX_DATA(SSL00_PJ17_MARK, PJ17MD_011), PINMUX_DATA(TIOC0B_MARK, PJ17MD_100), PINMUX_DATA(SIOFSYNC_MARK, PJ17MD_101), PINMUX_DATA(PJ16_DATA, PJ16MD_000), PINMUX_DATA(DV_DATA16_MARK, PJ16MD_001), - PINMUX_DATA(LCD_DATA16_MARK, PJ16MD_010), + PINMUX_DATA(LCD_DATA16_PJ16_MARK, PJ16MD_010), PINMUX_DATA(RSPCK0_PJ16_MARK, PJ16MD_011), PINMUX_DATA(TIOC0A_MARK, PJ16MD_100), PINMUX_DATA(SIOFSCK_MARK, PJ16MD_101), PINMUX_DATA(PJ15_DATA, PJ15MD_000), PINMUX_DATA(DV_DATA15_MARK, PJ15MD_001), - PINMUX_DATA(LCD_DATA15_MARK, PJ15MD_010), + PINMUX_DATA(LCD_DATA15_PJ15_MARK, PJ15MD_010), PINMUX_DATA(PINT7_PJ_MARK, PJ15MD_011), PINMUX_DATA(PWM2H_MARK, PJ15MD_100), PINMUX_DATA(TXD7_MARK, PJ15MD_101), PINMUX_DATA(PJ14_DATA, PJ14MD_000), PINMUX_DATA(DV_DATA14_MARK, PJ14MD_001), - PINMUX_DATA(LCD_DATA14_MARK, PJ14MD_010), + PINMUX_DATA(LCD_DATA14_PJ14_MARK, PJ14MD_010), PINMUX_DATA(PINT6_PJ_MARK, PJ14MD_011), PINMUX_DATA(PWM2G_MARK, PJ14MD_100), PINMUX_DATA(TXD6_MARK, PJ14MD_101), PINMUX_DATA(PJ13_DATA, PJ13MD_000), PINMUX_DATA(DV_DATA13_MARK, PJ13MD_001), - PINMUX_DATA(LCD_DATA13_MARK, PJ13MD_010), + PINMUX_DATA(LCD_DATA13_PJ13_MARK, PJ13MD_010), PINMUX_DATA(PINT5_PJ_MARK, PJ13MD_011), PINMUX_DATA(PWM2F_MARK, PJ13MD_100), PINMUX_DATA(TXD5_MARK, PJ13MD_101), PINMUX_DATA(PJ12_DATA, PJ12MD_000), PINMUX_DATA(DV_DATA12_MARK, PJ12MD_001), - PINMUX_DATA(LCD_DATA12_MARK, PJ12MD_010), + PINMUX_DATA(LCD_DATA12_PJ12_MARK, PJ12MD_010), PINMUX_DATA(PINT4_PJ_MARK, PJ12MD_011), PINMUX_DATA(PWM2E_MARK, PJ12MD_100), PINMUX_DATA(SCK7_MARK, PJ12MD_101), PINMUX_DATA(PJ11_DATA, PJ11MD_000), PINMUX_DATA(DV_DATA11_MARK, PJ11MD_001), - PINMUX_DATA(LCD_DATA11_MARK, PJ11MD_010), + PINMUX_DATA(LCD_DATA11_PJ11_MARK, PJ11MD_010), PINMUX_DATA(PINT3_PJ_MARK, PJ11MD_011), PINMUX_DATA(PWM2D_MARK, PJ11MD_100), PINMUX_DATA(SCK6_MARK, PJ11MD_101), PINMUX_DATA(PJ10_DATA, PJ10MD_000), PINMUX_DATA(DV_DATA10_MARK, PJ10MD_001), - PINMUX_DATA(LCD_DATA10_MARK, PJ10MD_010), + PINMUX_DATA(LCD_DATA10_PJ10_MARK, PJ10MD_010), PINMUX_DATA(PINT2_PJ_MARK, PJ10MD_011), PINMUX_DATA(PWM2C_MARK, PJ10MD_100), PINMUX_DATA(SCK5_MARK, PJ10MD_101), PINMUX_DATA(PJ9_DATA, PJ9MD_000), PINMUX_DATA(DV_DATA9_MARK, PJ9MD_001), - PINMUX_DATA(LCD_DATA9_MARK, PJ9MD_010), + PINMUX_DATA(LCD_DATA9_PJ9_MARK, PJ9MD_010), PINMUX_DATA(PINT1_PJ_MARK, PJ9MD_011), PINMUX_DATA(PWM2B_MARK, PJ9MD_100), PINMUX_DATA(RTS5_MARK, PJ9MD_101), PINMUX_DATA(PJ8_DATA, PJ8MD_000), PINMUX_DATA(DV_DATA8_MARK, PJ8MD_001), - PINMUX_DATA(LCD_DATA8_MARK, PJ8MD_010), + PINMUX_DATA(LCD_DATA8_PJ8_MARK, PJ8MD_010), PINMUX_DATA(PINT0_PJ_MARK, PJ8MD_011), PINMUX_DATA(PWM2A_MARK, PJ8MD_100), PINMUX_DATA(CTS5_MARK, PJ8MD_101), PINMUX_DATA(PJ7_DATA, PJ7MD_000), PINMUX_DATA(DV_DATA7_MARK, PJ7MD_001), - PINMUX_DATA(LCD_DATA7_MARK, PJ7MD_010), + PINMUX_DATA(LCD_DATA7_PJ7_MARK, PJ7MD_010), PINMUX_DATA(SD_D2_MARK, PJ7MD_011), PINMUX_DATA(PWM1H_MARK, PJ7MD_100), PINMUX_DATA(PJ6_DATA, PJ6MD_000), PINMUX_DATA(DV_DATA6_MARK, PJ6MD_001), - PINMUX_DATA(LCD_DATA6_MARK, PJ6MD_010), + PINMUX_DATA(LCD_DATA6_PJ6_MARK, PJ6MD_010), PINMUX_DATA(SD_D3_MARK, PJ6MD_011), PINMUX_DATA(PWM1G_MARK, PJ6MD_100), PINMUX_DATA(PJ5_DATA, PJ5MD_000), PINMUX_DATA(DV_DATA5_MARK, PJ5MD_001), - PINMUX_DATA(LCD_DATA5_MARK, PJ5MD_010), + PINMUX_DATA(LCD_DATA5_PJ5_MARK, PJ5MD_010), PINMUX_DATA(SD_CMD_MARK, PJ5MD_011), PINMUX_DATA(PWM1F_MARK, PJ5MD_100), PINMUX_DATA(PJ4_DATA, PJ4MD_000), PINMUX_DATA(DV_DATA4_MARK, PJ4MD_001), - PINMUX_DATA(LCD_DATA4_MARK, PJ4MD_010), + PINMUX_DATA(LCD_DATA4_PJ4_MARK, PJ4MD_010), PINMUX_DATA(SD_CLK_MARK, PJ4MD_011), PINMUX_DATA(PWM1E_MARK, PJ4MD_100), PINMUX_DATA(PJ3_DATA, PJ3MD_000), PINMUX_DATA(DV_DATA3_MARK, PJ3MD_001), - PINMUX_DATA(LCD_DATA3_MARK, PJ3MD_010), + PINMUX_DATA(LCD_DATA3_PJ3_MARK, PJ3MD_010), PINMUX_DATA(SD_D0_MARK, PJ3MD_011), PINMUX_DATA(PWM1D_MARK, PJ3MD_100), PINMUX_DATA(PJ2_DATA, PJ2MD_000), PINMUX_DATA(DV_DATA2_MARK, PJ2MD_001), - PINMUX_DATA(LCD_DATA2_MARK, PJ2MD_010), + PINMUX_DATA(LCD_DATA2_PJ2_MARK, PJ2MD_010), PINMUX_DATA(SD_D1_MARK, PJ2MD_011), PINMUX_DATA(PWM1C_MARK, PJ2MD_100), PINMUX_DATA(PJ1_DATA, PJ1MD_000), PINMUX_DATA(DV_DATA1_MARK, PJ1MD_001), - PINMUX_DATA(LCD_DATA1_MARK, PJ1MD_010), + PINMUX_DATA(LCD_DATA1_PJ1_MARK, PJ1MD_010), PINMUX_DATA(SD_WP_MARK, PJ1MD_011), PINMUX_DATA(PWM1B_MARK, PJ1MD_100), PINMUX_DATA(PJ0_DATA, PJ0MD_000), PINMUX_DATA(DV_DATA0_MARK, PJ0MD_001), - PINMUX_DATA(LCD_DATA0_MARK, PJ0MD_010), + PINMUX_DATA(LCD_DATA0_PJ0_MARK, PJ0MD_010), PINMUX_DATA(SD_CD_MARK, PJ0MD_011), PINMUX_DATA(PWM1A_MARK, PJ0MD_100), }; @@ -1877,30 +1891,55 @@ static struct pinmux_gpio pinmux_gpios[] = { PINMUX_GPIO(GPIO_FN_LCD_HSYNC, LCD_HSYNC_MARK), PINMUX_GPIO(GPIO_FN_LCD_DE, LCD_DE_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA23, LCD_DATA23_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA22, LCD_DATA22_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA21, LCD_DATA21_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA20, LCD_DATA20_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA19, LCD_DATA19_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA18, LCD_DATA18_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA17, LCD_DATA17_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA16, LCD_DATA16_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA15, LCD_DATA15_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA14, LCD_DATA14_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA13, LCD_DATA13_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA12, LCD_DATA12_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA11, LCD_DATA11_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA10, LCD_DATA10_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA9, LCD_DATA9_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA8, LCD_DATA8_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA7, LCD_DATA7_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA6, LCD_DATA6_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA5, LCD_DATA5_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA4, LCD_DATA4_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA3, LCD_DATA3_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA2, LCD_DATA2_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA1, LCD_DATA1_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA0, LCD_DATA0_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA23_PG23, LCD_DATA23_PG23_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA22_PG22, LCD_DATA22_PG22_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA21_PG21, LCD_DATA21_PG21_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA20_PG20, LCD_DATA20_PG20_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA19_PG19, LCD_DATA19_PG19_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA18_PG18, LCD_DATA18_PG18_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA17_PG17, LCD_DATA17_PG17_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA16_PG16, LCD_DATA16_PG16_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA15_PG15, LCD_DATA15_PG15_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA14_PG14, LCD_DATA14_PG14_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA13_PG13, LCD_DATA13_PG13_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA12_PG12, LCD_DATA12_PG12_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA11_PG11, LCD_DATA11_PG11_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA10_PG10, LCD_DATA10_PG10_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA9_PG9, LCD_DATA9_PG9_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA8_PG8, LCD_DATA8_PG8_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA7_PG7, LCD_DATA7_PG7_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA6_PG6, LCD_DATA6_PG6_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA5_PG5, LCD_DATA5_PG5_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA4_PG4, LCD_DATA4_PG4_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA3_PG3, LCD_DATA3_PG3_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA2_PG2, LCD_DATA2_PG2_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA1_PG1, LCD_DATA1_PG1_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA0_PG0, LCD_DATA0_PG0_MARK), + + PINMUX_GPIO(GPIO_FN_LCD_DATA23_PJ23, LCD_DATA23_PJ23_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA22_PJ22, LCD_DATA22_PJ22_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA21_PJ21, LCD_DATA21_PJ21_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA20_PJ20, LCD_DATA20_PJ20_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA19_PJ19, LCD_DATA19_PJ19_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA18_PJ18, LCD_DATA18_PJ18_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA17_PJ17, LCD_DATA17_PJ17_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA16_PJ16, LCD_DATA16_PJ16_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA15_PJ15, LCD_DATA15_PJ15_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA14_PJ14, LCD_DATA14_PJ14_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA13_PJ13, LCD_DATA13_PJ13_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA12_PJ12, LCD_DATA12_PJ12_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA11_PJ11, LCD_DATA11_PJ11_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA10_PJ10, LCD_DATA10_PJ10_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA9_PJ9, LCD_DATA9_PJ9_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA8_PJ8, LCD_DATA8_PJ8_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA7_PJ7, LCD_DATA7_PJ7_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA6_PJ6, LCD_DATA6_PJ6_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA5_PJ5, LCD_DATA5_PJ5_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA4_PJ4, LCD_DATA4_PJ4_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA3_PJ3, LCD_DATA3_PJ3_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA2_PJ2, LCD_DATA2_PJ2_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA1_PJ1, LCD_DATA1_PJ1_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA0_PJ0, LCD_DATA0_PJ0_MARK), PINMUX_GPIO(GPIO_FN_LCD_M_DISP, LCD_M_DISP_MARK), }; diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 7b57bf1dc85..ebe7a7d9721 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -273,7 +273,7 @@ void __init setup_arch(char **cmdline_p) data_resource.start = virt_to_phys(_etext); data_resource.end = virt_to_phys(_edata)-1; bss_resource.start = virt_to_phys(__bss_start); - bss_resource.end = virt_to_phys(_ebss)-1; + bss_resource.end = virt_to_phys(__bss_stop)-1; #ifdef CONFIG_CMDLINE_OVERWRITE strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line)); diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c index 3896f26efa4..2a0a596ebf6 100644 --- a/arch/sh/kernel/sh_ksyms_32.c +++ b/arch/sh/kernel/sh_ksyms_32.c @@ -19,7 +19,6 @@ EXPORT_SYMBOL(csum_partial); EXPORT_SYMBOL(csum_partial_copy_generic); EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(__clear_user); -EXPORT_SYMBOL(_ebss); EXPORT_SYMBOL(empty_zero_page); #define DECLARE_EXPORT(name) \ diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index c98905f71e2..db88cbf9eaf 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -78,7 +78,6 @@ SECTIONS . = ALIGN(PAGE_SIZE); __init_end = .; BSS_SECTION(0, PAGE_SIZE, 4) - _ebss = .; /* uClinux MTD sucks */ _end = . ; STABS_DEBUG diff --git a/arch/sh/lib/mcount.S b/arch/sh/lib/mcount.S index 84a57761f17..60164e65d66 100644 --- a/arch/sh/lib/mcount.S +++ b/arch/sh/lib/mcount.S @@ -39,7 +39,7 @@ * * Make sure the stack pointer contains a valid address. Valid * addresses for kernel stacks are anywhere after the bss - * (after _ebss) and anywhere in init_thread_union (init_stack). + * (after __bss_stop) and anywhere in init_thread_union (init_stack). */ #define STACK_CHECK() \ mov #(THREAD_SIZE >> 10), r0; \ @@ -60,7 +60,7 @@ cmp/hi r2, r1; \ bf stack_panic; \ \ - /* If sp > _ebss then we're OK. */ \ + /* If sp > __bss_stop then we're OK. */ \ mov.l .L_ebss, r1; \ cmp/hi r1, r15; \ bt 1f; \ @@ -70,7 +70,7 @@ cmp/hs r1, r15; \ bf stack_panic; \ \ - /* If sp > init_stack && sp < _ebss, not OK. */ \ + /* If sp > init_stack && sp < __bss_stop, not OK. */ \ add r0, r1; \ cmp/hs r1, r15; \ bt stack_panic; \ @@ -292,8 +292,6 @@ stack_panic: nop .align 2 -.L_ebss: - .long _ebss .L_init_thread_union: .long init_thread_union .Lpanic: diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c index 0dc1f578608..11c6c9603e7 100644 --- a/arch/sparc/kernel/sys_sparc_64.c +++ b/arch/sparc/kernel/sys_sparc_64.c @@ -502,12 +502,12 @@ SYSCALL_DEFINE1(sparc64_personality, unsigned long, personality) { int ret; - if (current->personality == PER_LINUX32 && - personality == PER_LINUX) - personality = PER_LINUX32; + if (personality(current->personality) == PER_LINUX32 && + personality(personality) == PER_LINUX) + personality |= PER_LINUX32; ret = sys_personality(personality); - if (ret == PER_LINUX32) - ret = PER_LINUX; + if (personality(ret) == PER_LINUX32) + ret &= ~PER_LINUX32; return ret; } diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index 6026fdd1b2e..d58edf5fefd 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -2020,6 +2020,9 @@ EXPORT_SYMBOL(_PAGE_CACHE); #ifdef CONFIG_SPARSEMEM_VMEMMAP unsigned long vmemmap_table[VMEMMAP_SIZE]; +static long __meminitdata addr_start, addr_end; +static int __meminitdata node_start; + int __meminit vmemmap_populate(struct page *start, unsigned long nr, int node) { unsigned long vstart = (unsigned long) start; @@ -2050,15 +2053,30 @@ int __meminit vmemmap_populate(struct page *start, unsigned long nr, int node) *vmem_pp = pte_base | __pa(block); - printk(KERN_INFO "[%p-%p] page_structs=%lu " - "node=%d entry=%lu/%lu\n", start, block, nr, - node, - addr >> VMEMMAP_CHUNK_SHIFT, - VMEMMAP_SIZE); + /* check to see if we have contiguous blocks */ + if (addr_end != addr || node_start != node) { + if (addr_start) + printk(KERN_DEBUG " [%lx-%lx] on node %d\n", + addr_start, addr_end-1, node_start); + addr_start = addr; + node_start = node; + } + addr_end = addr + VMEMMAP_CHUNK; } } return 0; } + +void __meminit vmemmap_populate_print_last(void) +{ + if (addr_start) { + printk(KERN_DEBUG " [%lx-%lx] on node %d\n", + addr_start, addr_end-1, node_start); + addr_start = 0; + addr_end = 0; + node_start = 0; + } +} #endif /* CONFIG_SPARSEMEM_VMEMMAP */ static void prot_init_common(unsigned long page_none, diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index ba2657c4921..8ec3a1aa4ab 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1527,7 +1527,7 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. config CC_STACKPROTECTOR - bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" + bool "Enable -fstack-protector buffer overflow detection" ---help--- This option turns on the -fstack-protector GCC feature. This feature puts, at the beginning of functions, a canary value on diff --git a/arch/x86/Makefile b/arch/x86/Makefile index b0c5276861e..682e9c210ba 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -27,6 +27,10 @@ ifeq ($(CONFIG_X86_32),y) KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return + # Never want PIC in a 32-bit kernel, prevent breakage with GCC built + # with nonstandard options + KBUILD_CFLAGS += -fno-pic + # prevent gcc from keeping the stack 16 byte aligned KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2) diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index 5a747dd884d..f7535bedc33 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -57,7 +57,7 @@ KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \ -Wall -Wstrict-prototypes \ -march=i386 -mregparm=3 \ -include $(srctree)/$(src)/code16gcc.h \ - -fno-strict-aliasing -fomit-frame-pointer \ + -fno-strict-aliasing -fomit-frame-pointer -fno-pic \ $(call cc-option, -ffreestanding) \ $(call cc-option, -fno-toplevel-reorder,\ $(call cc-option, -fno-unit-at-a-time)) \ diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 441520e4174..a3ac52b29cb 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -33,6 +33,14 @@ #define MCI_STATUS_PCC (1ULL<<57) /* processor context corrupt */ #define MCI_STATUS_S (1ULL<<56) /* Signaled machine check */ #define MCI_STATUS_AR (1ULL<<55) /* Action required */ +#define MCACOD 0xffff /* MCA Error Code */ + +/* Architecturally defined codes from SDM Vol. 3B Chapter 15 */ +#define MCACOD_SCRUB 0x00C0 /* 0xC0-0xCF Memory Scrubbing */ +#define MCACOD_SCRUBMSK 0xfff0 +#define MCACOD_L3WB 0x017A /* L3 Explicit Writeback */ +#define MCACOD_DATA 0x0134 /* Data Load */ +#define MCACOD_INSTR 0x0150 /* Instruction Fetch */ /* MCi_MISC register defines */ #define MCI_MISC_ADDR_LSB(m) ((m) & 0x3f) diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h index dab39350e51..cb4e43bce98 100644 --- a/arch/x86/include/asm/perf_event.h +++ b/arch/x86/include/asm/perf_event.h @@ -196,11 +196,16 @@ static inline u32 get_ibs_caps(void) { return 0; } extern void perf_events_lapic_init(void); /* - * Abuse bit 3 of the cpu eflags register to indicate proper PEBS IP fixups. - * This flag is otherwise unused and ABI specified to be 0, so nobody should - * care what we do with it. + * Abuse bits {3,5} of the cpu eflags register. These flags are otherwise + * unused and ABI specified to be 0, so nobody should care what we do with + * them. + * + * EXACT - the IP points to the exact instruction that triggered the + * event (HW bugs exempt). + * VM - original X86_VM_MASK; see set_linear_ip(). */ #define PERF_EFLAGS_EXACT (1UL << 3) +#define PERF_EFLAGS_VM (1UL << 5) struct pt_regs; extern unsigned long perf_instruction_pointer(struct pt_regs *regs); diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 95bf99de905..1b8e5a03d94 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -25,10 +25,6 @@ unsigned long acpi_realmode_flags; static char temp_stack[4096]; #endif -asmlinkage void acpi_enter_s3(void) -{ - acpi_enter_sleep_state(3, wake_sleep_flags); -} /** * acpi_suspend_lowlevel - save kernel state * diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h index 5653a5791ec..67f59f8c695 100644 --- a/arch/x86/kernel/acpi/sleep.h +++ b/arch/x86/kernel/acpi/sleep.h @@ -2,7 +2,6 @@ * Variables and functions used by the code in sleep.c */ -#include <linux/linkage.h> #include <asm/realmode.h> extern unsigned long saved_video_mode; @@ -11,7 +10,6 @@ extern long saved_magic; extern int wakeup_pmode_return; extern u8 wake_sleep_flags; -extern asmlinkage void acpi_enter_s3(void); extern unsigned long acpi_copy_wakeup_routine(unsigned long); extern void wakeup_long64(void); diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S index 72610839f03..13ab720573e 100644 --- a/arch/x86/kernel/acpi/wakeup_32.S +++ b/arch/x86/kernel/acpi/wakeup_32.S @@ -74,7 +74,9 @@ restore_registers: ENTRY(do_suspend_lowlevel) call save_processor_state call save_registers - call acpi_enter_s3 + pushl $3 + call acpi_enter_sleep_state + addl $4, %esp # In case of S3 failure, we'll emerge here. Jump # to ret_point to recover diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S index 014d1d28c39..8ea5164cbd0 100644 --- a/arch/x86/kernel/acpi/wakeup_64.S +++ b/arch/x86/kernel/acpi/wakeup_64.S @@ -71,7 +71,9 @@ ENTRY(do_suspend_lowlevel) movq %rsi, saved_rsi addq $8, %rsp - call acpi_enter_s3 + movl $3, %edi + xorl %eax, %eax + call acpi_enter_sleep_state /* in case something went wrong, restore the machine status and go on */ jmp resume_point diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 931280ff829..afb7ff79a29 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -224,7 +224,7 @@ void __init arch_init_ideal_nops(void) ideal_nops = intel_nops; #endif } - + break; default: #ifdef CONFIG_X86_64 ideal_nops = k8_nops; diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 406eee78468..c265593ec2c 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1204,7 +1204,7 @@ static void __clear_irq_vector(int irq, struct irq_cfg *cfg) BUG_ON(!cfg->vector); vector = cfg->vector; - for_each_cpu(cpu, cfg->domain) + for_each_cpu_and(cpu, cfg->domain, cpu_online_mask) per_cpu(vector_irq, cpu)[vector] = -1; cfg->vector = 0; @@ -1212,7 +1212,7 @@ static void __clear_irq_vector(int irq, struct irq_cfg *cfg) if (likely(!cfg->move_in_progress)) return; - for_each_cpu(cpu, cfg->old_domain) { + for_each_cpu_and(cpu, cfg->old_domain, cpu_online_mask) { for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) { if (per_cpu(vector_irq, cpu)[vector] != irq) @@ -1356,6 +1356,16 @@ static void setup_ioapic_irq(unsigned int irq, struct irq_cfg *cfg, if (!IO_APIC_IRQ(irq)) return; + /* + * For legacy irqs, cfg->domain starts with cpu 0. Now that IO-APIC + * can handle this irq and the apic driver is finialized at this point, + * update the cfg->domain. + */ + if (irq < legacy_pic->nr_legacy_irqs && + cpumask_equal(cfg->domain, cpumask_of(0))) + apic->vector_allocation_domain(0, cfg->domain, + apic->target_cpus()); + if (assign_irq_vector(irq, cfg, apic->target_cpus())) return; diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 46d8786d655..a5fbc3c5fcc 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -144,6 +144,8 @@ static int __init x86_xsave_setup(char *s) { setup_clear_cpu_cap(X86_FEATURE_XSAVE); setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT); + setup_clear_cpu_cap(X86_FEATURE_AVX); + setup_clear_cpu_cap(X86_FEATURE_AVX2); return 1; } __setup("noxsave", x86_xsave_setup); diff --git a/arch/x86/kernel/cpu/mcheck/mce-severity.c b/arch/x86/kernel/cpu/mcheck/mce-severity.c index 413c2ced887..13017626f9a 100644 --- a/arch/x86/kernel/cpu/mcheck/mce-severity.c +++ b/arch/x86/kernel/cpu/mcheck/mce-severity.c @@ -55,13 +55,6 @@ static struct severity { #define MCI_UC_S (MCI_STATUS_UC|MCI_STATUS_S) #define MCI_UC_SAR (MCI_STATUS_UC|MCI_STATUS_S|MCI_STATUS_AR) #define MCI_ADDR (MCI_STATUS_ADDRV|MCI_STATUS_MISCV) -#define MCACOD 0xffff -/* Architecturally defined codes from SDM Vol. 3B Chapter 15 */ -#define MCACOD_SCRUB 0x00C0 /* 0xC0-0xCF Memory Scrubbing */ -#define MCACOD_SCRUBMSK 0xfff0 -#define MCACOD_L3WB 0x017A /* L3 Explicit Writeback */ -#define MCACOD_DATA 0x0134 /* Data Load */ -#define MCACOD_INSTR 0x0150 /* Instruction Fetch */ MCESEV( NO, "Invalid", diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 5e095f873e3..292d0258311 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -103,6 +103,8 @@ DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = { static DEFINE_PER_CPU(struct work_struct, mce_work); +static void (*quirk_no_way_out)(int bank, struct mce *m, struct pt_regs *regs); + /* * CPU/chipset specific EDAC code can register a notifier call here to print * MCE errors in a human-readable form. @@ -650,14 +652,18 @@ EXPORT_SYMBOL_GPL(machine_check_poll); * Do a quick check if any of the events requires a panic. * This decides if we keep the events around or clear them. */ -static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp) +static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp, + struct pt_regs *regs) { int i, ret = 0; for (i = 0; i < banks; i++) { m->status = mce_rdmsrl(MSR_IA32_MCx_STATUS(i)); - if (m->status & MCI_STATUS_VAL) + if (m->status & MCI_STATUS_VAL) { __set_bit(i, validp); + if (quirk_no_way_out) + quirk_no_way_out(i, m, regs); + } if (mce_severity(m, tolerant, msg) >= MCE_PANIC_SEVERITY) ret = 1; } @@ -1040,7 +1046,7 @@ void do_machine_check(struct pt_regs *regs, long error_code) *final = m; memset(valid_banks, 0, sizeof(valid_banks)); - no_way_out = mce_no_way_out(&m, &msg, valid_banks); + no_way_out = mce_no_way_out(&m, &msg, valid_banks, regs); barrier(); @@ -1418,6 +1424,34 @@ static void __mcheck_cpu_init_generic(void) } } +/* + * During IFU recovery Sandy Bridge -EP4S processors set the RIPV and + * EIPV bits in MCG_STATUS to zero on the affected logical processor (SDM + * Vol 3B Table 15-20). But this confuses both the code that determines + * whether the machine check occurred in kernel or user mode, and also + * the severity assessment code. Pretend that EIPV was set, and take the + * ip/cs values from the pt_regs that mce_gather_info() ignored earlier. + */ +static void quirk_sandybridge_ifu(int bank, struct mce *m, struct pt_regs *regs) +{ + if (bank != 0) + return; + if ((m->mcgstatus & (MCG_STATUS_EIPV|MCG_STATUS_RIPV)) != 0) + return; + if ((m->status & (MCI_STATUS_OVER|MCI_STATUS_UC| + MCI_STATUS_EN|MCI_STATUS_MISCV|MCI_STATUS_ADDRV| + MCI_STATUS_PCC|MCI_STATUS_S|MCI_STATUS_AR| + MCACOD)) != + (MCI_STATUS_UC|MCI_STATUS_EN| + MCI_STATUS_MISCV|MCI_STATUS_ADDRV|MCI_STATUS_S| + MCI_STATUS_AR|MCACOD_INSTR)) + return; + + m->mcgstatus |= MCG_STATUS_EIPV; + m->ip = regs->ip; + m->cs = regs->cs; +} + /* Add per CPU specific workarounds here */ static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c) { @@ -1515,6 +1549,9 @@ static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c) */ if (c->x86 == 6 && c->x86_model <= 13 && mce_bootlog < 0) mce_bootlog = 0; + + if (c->x86 == 6 && c->x86_model == 45) + quirk_no_way_out = quirk_sandybridge_ifu; } if (monarch_timeout < 0) monarch_timeout = 0; diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 29557aa06dd..915b876edd1 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -32,6 +32,8 @@ #include <asm/smp.h> #include <asm/alternative.h> #include <asm/timer.h> +#include <asm/desc.h> +#include <asm/ldt.h> #include "perf_event.h" @@ -1738,6 +1740,29 @@ valid_user_frame(const void __user *fp, unsigned long size) return (__range_not_ok(fp, size, TASK_SIZE) == 0); } +static unsigned long get_segment_base(unsigned int segment) +{ + struct desc_struct *desc; + int idx = segment >> 3; + + if ((segment & SEGMENT_TI_MASK) == SEGMENT_LDT) { + if (idx > LDT_ENTRIES) + return 0; + + if (idx > current->active_mm->context.size) + return 0; + + desc = current->active_mm->context.ldt; + } else { + if (idx > GDT_ENTRIES) + return 0; + + desc = __this_cpu_ptr(&gdt_page.gdt[0]); + } + + return get_desc_base(desc + idx); +} + #ifdef CONFIG_COMPAT #include <asm/compat.h> @@ -1746,13 +1771,17 @@ static inline int perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry) { /* 32-bit process in 64-bit kernel. */ + unsigned long ss_base, cs_base; struct stack_frame_ia32 frame; const void __user *fp; if (!test_thread_flag(TIF_IA32)) return 0; - fp = compat_ptr(regs->bp); + cs_base = get_segment_base(regs->cs); + ss_base = get_segment_base(regs->ss); + + fp = compat_ptr(ss_base + regs->bp); while (entry->nr < PERF_MAX_STACK_DEPTH) { unsigned long bytes; frame.next_frame = 0; @@ -1765,8 +1794,8 @@ perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry) if (!valid_user_frame(fp, sizeof(frame))) break; - perf_callchain_store(entry, frame.return_address); - fp = compat_ptr(frame.next_frame); + perf_callchain_store(entry, cs_base + frame.return_address); + fp = compat_ptr(ss_base + frame.next_frame); } return 1; } @@ -1789,6 +1818,12 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) return; } + /* + * We don't know what to do with VM86 stacks.. ignore them for now. + */ + if (regs->flags & (X86_VM_MASK | PERF_EFLAGS_VM)) + return; + fp = (void __user *)regs->bp; perf_callchain_store(entry, regs->ip); @@ -1816,16 +1851,50 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) } } -unsigned long perf_instruction_pointer(struct pt_regs *regs) +/* + * Deal with code segment offsets for the various execution modes: + * + * VM86 - the good olde 16 bit days, where the linear address is + * 20 bits and we use regs->ip + 0x10 * regs->cs. + * + * IA32 - Where we need to look at GDT/LDT segment descriptor tables + * to figure out what the 32bit base address is. + * + * X32 - has TIF_X32 set, but is running in x86_64 + * + * X86_64 - CS,DS,SS,ES are all zero based. + */ +static unsigned long code_segment_base(struct pt_regs *regs) { - unsigned long ip; + /* + * If we are in VM86 mode, add the segment offset to convert to a + * linear address. + */ + if (regs->flags & X86_VM_MASK) + return 0x10 * regs->cs; + + /* + * For IA32 we look at the GDT/LDT segment base to convert the + * effective IP to a linear address. + */ +#ifdef CONFIG_X86_32 + if (user_mode(regs) && regs->cs != __USER_CS) + return get_segment_base(regs->cs); +#else + if (test_thread_flag(TIF_IA32)) { + if (user_mode(regs) && regs->cs != __USER32_CS) + return get_segment_base(regs->cs); + } +#endif + return 0; +} +unsigned long perf_instruction_pointer(struct pt_regs *regs) +{ if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) - ip = perf_guest_cbs->get_guest_ip(); - else - ip = instruction_pointer(regs); + return perf_guest_cbs->get_guest_ip(); - return ip; + return regs->ip + code_segment_base(regs); } unsigned long perf_misc_flags(struct pt_regs *regs) @@ -1838,7 +1907,7 @@ unsigned long perf_misc_flags(struct pt_regs *regs) else misc |= PERF_RECORD_MISC_GUEST_KERNEL; } else { - if (!kernel_ip(regs->ip)) + if (user_mode(regs)) misc |= PERF_RECORD_MISC_USER; else misc |= PERF_RECORD_MISC_KERNEL; diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h index 821d53b696d..6605a81ba33 100644 --- a/arch/x86/kernel/cpu/perf_event.h +++ b/arch/x86/kernel/cpu/perf_event.h @@ -516,6 +516,26 @@ static inline bool kernel_ip(unsigned long ip) #endif } +/* + * Not all PMUs provide the right context information to place the reported IP + * into full context. Specifically segment registers are typically not + * supplied. + * + * Assuming the address is a linear address (it is for IBS), we fake the CS and + * vm86 mode using the known zero-based code segment and 'fix up' the registers + * to reflect this. + * + * Intel PEBS/LBR appear to typically provide the effective address, nothing + * much we can do about that but pray and treat it like a linear address. + */ +static inline void set_linear_ip(struct pt_regs *regs, unsigned long ip) +{ + regs->cs = kernel_ip(ip) ? __KERNEL_CS : __USER_CS; + if (regs->flags & X86_VM_MASK) + regs->flags ^= (PERF_EFLAGS_VM | X86_VM_MASK); + regs->ip = ip; +} + #ifdef CONFIG_CPU_SUP_AMD int amd_pmu_init(void); diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c index da9bcdcd985..7bfb5bec863 100644 --- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c +++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c @@ -13,6 +13,8 @@ #include <asm/apic.h> +#include "perf_event.h" + static u32 ibs_caps; #if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_AMD) @@ -536,7 +538,7 @@ static int perf_ibs_handle_irq(struct perf_ibs *perf_ibs, struct pt_regs *iregs) if (check_rip && (ibs_data.regs[2] & IBS_RIP_INVALID)) { regs.flags &= ~PERF_EFLAGS_EXACT; } else { - instruction_pointer_set(®s, ibs_data.regs[1]); + set_linear_ip(®s, ibs_data.regs[1]); regs.flags |= PERF_EFLAGS_EXACT; } diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 382366977d4..7f2739e03e7 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -1522,8 +1522,16 @@ static struct perf_guest_switch_msr *intel_guest_get_msrs(int *nr) arr[0].msr = MSR_CORE_PERF_GLOBAL_CTRL; arr[0].host = x86_pmu.intel_ctrl & ~cpuc->intel_ctrl_guest_mask; arr[0].guest = x86_pmu.intel_ctrl & ~cpuc->intel_ctrl_host_mask; + /* + * If PMU counter has PEBS enabled it is not enough to disable counter + * on a guest entry since PEBS memory write can overshoot guest entry + * and corrupt guest memory. Disabling PEBS solves the problem. + */ + arr[1].msr = MSR_IA32_PEBS_ENABLE; + arr[1].host = cpuc->pebs_enabled; + arr[1].guest = 0; - *nr = 1; + *nr = 2; return arr; } diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c index 629ae0b7ad9..e38d97bf425 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_ds.c +++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c @@ -499,7 +499,7 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs) * We sampled a branch insn, rewind using the LBR stack */ if (ip == to) { - regs->ip = from; + set_linear_ip(regs, from); return 1; } @@ -529,7 +529,7 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs) } while (to < ip); if (to == ip) { - regs->ip = old_to; + set_linear_ip(regs, old_to); return 1; } @@ -569,7 +569,8 @@ static void __intel_pmu_pebs_event(struct perf_event *event, * A possible PERF_SAMPLE_REGS will have to transfer all regs. */ regs = *iregs; - regs.ip = pebs->ip; + regs.flags = pebs->flags; + set_linear_ip(®s, pebs->ip); regs.bp = pebs->bp; regs.sp = pebs->sp; diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c index 7563fda9f03..0a5571080e7 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c @@ -796,7 +796,6 @@ static struct intel_uncore_type *nhm_msr_uncores[] = { DEFINE_UNCORE_FORMAT_ATTR(event5, event, "config:1-5"); DEFINE_UNCORE_FORMAT_ATTR(counter, counter, "config:6-7"); -DEFINE_UNCORE_FORMAT_ATTR(mm_cfg, mm_cfg, "config:63"); DEFINE_UNCORE_FORMAT_ATTR(match, match, "config1:0-63"); DEFINE_UNCORE_FORMAT_ATTR(mask, mask, "config2:0-63"); @@ -902,16 +901,21 @@ static struct attribute_group nhmex_uncore_cbox_format_group = { .attrs = nhmex_uncore_cbox_formats_attr, }; +/* msr offset for each instance of cbox */ +static unsigned nhmex_cbox_msr_offsets[] = { + 0x0, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0, 0x240, 0x2c0, +}; + static struct intel_uncore_type nhmex_uncore_cbox = { .name = "cbox", .num_counters = 6, - .num_boxes = 8, + .num_boxes = 10, .perf_ctr_bits = 48, .event_ctl = NHMEX_C0_MSR_PMON_EV_SEL0, .perf_ctr = NHMEX_C0_MSR_PMON_CTR0, .event_mask = NHMEX_PMON_RAW_EVENT_MASK, .box_ctl = NHMEX_C0_MSR_PMON_GLOBAL_CTL, - .msr_offset = NHMEX_C_MSR_OFFSET, + .msr_offsets = nhmex_cbox_msr_offsets, .pair_ctr_ctl = 1, .ops = &nhmex_uncore_ops, .format_group = &nhmex_uncore_cbox_format_group @@ -1032,24 +1036,22 @@ static struct intel_uncore_type nhmex_uncore_bbox = { static int nhmex_sbox_hw_config(struct intel_uncore_box *box, struct perf_event *event) { - struct hw_perf_event_extra *reg1 = &event->hw.extra_reg; - struct hw_perf_event_extra *reg2 = &event->hw.branch_reg; + struct hw_perf_event *hwc = &event->hw; + struct hw_perf_event_extra *reg1 = &hwc->extra_reg; + struct hw_perf_event_extra *reg2 = &hwc->branch_reg; - if (event->attr.config & NHMEX_S_PMON_MM_CFG_EN) { - reg1->config = event->attr.config1; - reg2->config = event->attr.config2; - } else { - reg1->config = ~0ULL; - reg2->config = ~0ULL; - } + /* only TO_R_PROG_EV event uses the match/mask register */ + if ((hwc->config & NHMEX_PMON_CTL_EV_SEL_MASK) != + NHMEX_S_EVENT_TO_R_PROG_EV) + return 0; if (box->pmu->pmu_idx == 0) reg1->reg = NHMEX_S0_MSR_MM_CFG; else reg1->reg = NHMEX_S1_MSR_MM_CFG; - reg1->idx = 0; - + reg1->config = event->attr.config1; + reg2->config = event->attr.config2; return 0; } @@ -1059,8 +1061,8 @@ static void nhmex_sbox_msr_enable_event(struct intel_uncore_box *box, struct per struct hw_perf_event_extra *reg1 = &hwc->extra_reg; struct hw_perf_event_extra *reg2 = &hwc->branch_reg; - wrmsrl(reg1->reg, 0); - if (reg1->config != ~0ULL || reg2->config != ~0ULL) { + if (reg1->idx != EXTRA_REG_NONE) { + wrmsrl(reg1->reg, 0); wrmsrl(reg1->reg + 1, reg1->config); wrmsrl(reg1->reg + 2, reg2->config); wrmsrl(reg1->reg, NHMEX_S_PMON_MM_CFG_EN); @@ -1074,7 +1076,6 @@ static struct attribute *nhmex_uncore_sbox_formats_attr[] = { &format_attr_edge.attr, &format_attr_inv.attr, &format_attr_thresh8.attr, - &format_attr_mm_cfg.attr, &format_attr_match.attr, &format_attr_mask.attr, NULL, @@ -1142,6 +1143,9 @@ static struct extra_reg nhmex_uncore_mbox_extra_regs[] = { EVENT_EXTRA_END }; +/* Nehalem-EX or Westmere-EX ? */ +bool uncore_nhmex; + static bool nhmex_mbox_get_shared_reg(struct intel_uncore_box *box, int idx, u64 config) { struct intel_uncore_extra_reg *er; @@ -1171,18 +1175,29 @@ static bool nhmex_mbox_get_shared_reg(struct intel_uncore_box *box, int idx, u64 return false; /* mask of the shared fields */ - mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK; + if (uncore_nhmex) + mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK; + else + mask = WSMEX_M_PMON_ZDP_CTL_FVC_MASK; er = &box->shared_regs[EXTRA_REG_NHMEX_M_ZDP_CTL_FVC]; raw_spin_lock_irqsave(&er->lock, flags); /* add mask of the non-shared field if it's in use */ - if (__BITS_VALUE(atomic_read(&er->ref), idx, 8)) - mask |= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + if (__BITS_VALUE(atomic_read(&er->ref), idx, 8)) { + if (uncore_nhmex) + mask |= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + else + mask |= WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + } if (!atomic_read(&er->ref) || !((er->config ^ config) & mask)) { atomic_add(1 << (idx * 8), &er->ref); - mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK | - NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + if (uncore_nhmex) + mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK | + NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + else + mask = WSMEX_M_PMON_ZDP_CTL_FVC_MASK | + WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); er->config &= ~mask; er->config |= (config & mask); ret = true; @@ -1216,7 +1231,10 @@ u64 nhmex_mbox_alter_er(struct perf_event *event, int new_idx, bool modify) /* get the non-shared control bits and shift them */ idx = orig_idx - EXTRA_REG_NHMEX_M_ZDP_CTL_FVC; - config &= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + if (uncore_nhmex) + config &= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + else + config &= WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); if (new_idx > orig_idx) { idx = new_idx - orig_idx; config <<= 3 * idx; @@ -1226,6 +1244,10 @@ u64 nhmex_mbox_alter_er(struct perf_event *event, int new_idx, bool modify) } /* add the shared control bits back */ + if (uncore_nhmex) + config |= NHMEX_M_PMON_ZDP_CTL_FVC_MASK & reg1->config; + else + config |= WSMEX_M_PMON_ZDP_CTL_FVC_MASK & reg1->config; config |= NHMEX_M_PMON_ZDP_CTL_FVC_MASK & reg1->config; if (modify) { /* adjust the main event selector */ @@ -1264,7 +1286,8 @@ again: } /* for the match/mask registers */ - if ((uncore_box_is_fake(box) || !reg2->alloc) && + if (reg2->idx != EXTRA_REG_NONE && + (uncore_box_is_fake(box) || !reg2->alloc) && !nhmex_mbox_get_shared_reg(box, reg2->idx, reg2->config)) goto fail; @@ -1278,7 +1301,8 @@ again: if (idx[0] != 0xff && idx[0] != __BITS_VALUE(reg1->idx, 0, 8)) nhmex_mbox_alter_er(event, idx[0], true); reg1->alloc |= alloc; - reg2->alloc = 1; + if (reg2->idx != EXTRA_REG_NONE) + reg2->alloc = 1; } return NULL; fail: @@ -1342,9 +1366,6 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event struct extra_reg *er; unsigned msr; int reg_idx = 0; - - if (WARN_ON_ONCE(reg1->idx != -1)) - return -EINVAL; /* * The mbox events may require 2 extra MSRs at the most. But only * the lower 32 bits in these MSRs are significant, so we can use @@ -1355,11 +1376,6 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event continue; if (event->attr.config1 & ~er->valid_mask) return -EINVAL; - if (er->idx == __BITS_VALUE(reg1->idx, 0, 8) || - er->idx == __BITS_VALUE(reg1->idx, 1, 8)) - continue; - if (WARN_ON_ONCE(reg_idx >= 2)) - return -EINVAL; msr = er->msr + type->msr_offset * box->pmu->pmu_idx; if (WARN_ON_ONCE(msr >= 0xffff || er->idx >= 0xff)) @@ -1368,6 +1384,8 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event /* always use the 32~63 bits to pass the PLD config */ if (er->idx == EXTRA_REG_NHMEX_M_PLD) reg_idx = 1; + else if (WARN_ON_ONCE(reg_idx > 0)) + return -EINVAL; reg1->idx &= ~(0xff << (reg_idx * 8)); reg1->reg &= ~(0xffff << (reg_idx * 16)); @@ -1376,17 +1394,21 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event reg1->config = event->attr.config1; reg_idx++; } - /* use config2 to pass the filter config */ - reg2->idx = EXTRA_REG_NHMEX_M_FILTER; - if (event->attr.config2 & NHMEX_M_PMON_MM_CFG_EN) - reg2->config = event->attr.config2; - else - reg2->config = ~0ULL; - if (box->pmu->pmu_idx == 0) - reg2->reg = NHMEX_M0_MSR_PMU_MM_CFG; - else - reg2->reg = NHMEX_M1_MSR_PMU_MM_CFG; - + /* + * The mbox only provides ability to perform address matching + * for the PLD events. + */ + if (reg_idx == 2) { + reg2->idx = EXTRA_REG_NHMEX_M_FILTER; + if (event->attr.config2 & NHMEX_M_PMON_MM_CFG_EN) + reg2->config = event->attr.config2; + else + reg2->config = ~0ULL; + if (box->pmu->pmu_idx == 0) + reg2->reg = NHMEX_M0_MSR_PMU_MM_CFG; + else + reg2->reg = NHMEX_M1_MSR_PMU_MM_CFG; + } return 0; } @@ -1422,34 +1444,36 @@ static void nhmex_mbox_msr_enable_event(struct intel_uncore_box *box, struct per wrmsrl(__BITS_VALUE(reg1->reg, 1, 16), nhmex_mbox_shared_reg_config(box, idx)); - wrmsrl(reg2->reg, 0); - if (reg2->config != ~0ULL) { - wrmsrl(reg2->reg + 1, - reg2->config & NHMEX_M_PMON_ADDR_MATCH_MASK); - wrmsrl(reg2->reg + 2, NHMEX_M_PMON_ADDR_MASK_MASK & - (reg2->config >> NHMEX_M_PMON_ADDR_MASK_SHIFT)); - wrmsrl(reg2->reg, NHMEX_M_PMON_MM_CFG_EN); + if (reg2->idx != EXTRA_REG_NONE) { + wrmsrl(reg2->reg, 0); + if (reg2->config != ~0ULL) { + wrmsrl(reg2->reg + 1, + reg2->config & NHMEX_M_PMON_ADDR_MATCH_MASK); + wrmsrl(reg2->reg + 2, NHMEX_M_PMON_ADDR_MASK_MASK & + (reg2->config >> NHMEX_M_PMON_ADDR_MASK_SHIFT)); + wrmsrl(reg2->reg, NHMEX_M_PMON_MM_CFG_EN); + } } wrmsrl(hwc->config_base, hwc->config | NHMEX_PMON_CTL_EN_BIT0); } -DEFINE_UNCORE_FORMAT_ATTR(count_mode, count_mode, "config:2-3"); -DEFINE_UNCORE_FORMAT_ATTR(storage_mode, storage_mode, "config:4-5"); -DEFINE_UNCORE_FORMAT_ATTR(wrap_mode, wrap_mode, "config:6"); -DEFINE_UNCORE_FORMAT_ATTR(flag_mode, flag_mode, "config:7"); -DEFINE_UNCORE_FORMAT_ATTR(inc_sel, inc_sel, "config:9-13"); -DEFINE_UNCORE_FORMAT_ATTR(set_flag_sel, set_flag_sel, "config:19-21"); -DEFINE_UNCORE_FORMAT_ATTR(filter_cfg, filter_cfg, "config2:63"); -DEFINE_UNCORE_FORMAT_ATTR(filter_match, filter_match, "config2:0-33"); -DEFINE_UNCORE_FORMAT_ATTR(filter_mask, filter_mask, "config2:34-61"); -DEFINE_UNCORE_FORMAT_ATTR(dsp, dsp, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(thr, thr, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(fvc, fvc, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(pgt, pgt, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(map, map, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(iss, iss, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(pld, pld, "config1:32-63"); +DEFINE_UNCORE_FORMAT_ATTR(count_mode, count_mode, "config:2-3"); +DEFINE_UNCORE_FORMAT_ATTR(storage_mode, storage_mode, "config:4-5"); +DEFINE_UNCORE_FORMAT_ATTR(wrap_mode, wrap_mode, "config:6"); +DEFINE_UNCORE_FORMAT_ATTR(flag_mode, flag_mode, "config:7"); +DEFINE_UNCORE_FORMAT_ATTR(inc_sel, inc_sel, "config:9-13"); +DEFINE_UNCORE_FORMAT_ATTR(set_flag_sel, set_flag_sel, "config:19-21"); +DEFINE_UNCORE_FORMAT_ATTR(filter_cfg_en, filter_cfg_en, "config2:63"); +DEFINE_UNCORE_FORMAT_ATTR(filter_match, filter_match, "config2:0-33"); +DEFINE_UNCORE_FORMAT_ATTR(filter_mask, filter_mask, "config2:34-61"); +DEFINE_UNCORE_FORMAT_ATTR(dsp, dsp, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(thr, thr, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(fvc, fvc, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(pgt, pgt, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(map, map, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(iss, iss, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(pld, pld, "config1:32-63"); static struct attribute *nhmex_uncore_mbox_formats_attr[] = { &format_attr_count_mode.attr, @@ -1458,7 +1482,7 @@ static struct attribute *nhmex_uncore_mbox_formats_attr[] = { &format_attr_flag_mode.attr, &format_attr_inc_sel.attr, &format_attr_set_flag_sel.attr, - &format_attr_filter_cfg.attr, + &format_attr_filter_cfg_en.attr, &format_attr_filter_match.attr, &format_attr_filter_mask.attr, &format_attr_dsp.attr, @@ -1482,6 +1506,12 @@ static struct uncore_event_desc nhmex_uncore_mbox_events[] = { { /* end: all zeroes */ }, }; +static struct uncore_event_desc wsmex_uncore_mbox_events[] = { + INTEL_UNCORE_EVENT_DESC(bbox_cmds_read, "inc_sel=0xd,fvc=0x5000"), + INTEL_UNCORE_EVENT_DESC(bbox_cmds_write, "inc_sel=0xd,fvc=0x5040"), + { /* end: all zeroes */ }, +}; + static struct intel_uncore_ops nhmex_uncore_mbox_ops = { NHMEX_UNCORE_OPS_COMMON_INIT(), .enable_event = nhmex_mbox_msr_enable_event, @@ -1513,7 +1543,7 @@ void nhmex_rbox_alter_er(struct intel_uncore_box *box, struct perf_event *event) struct hw_perf_event_extra *reg1 = &hwc->extra_reg; int port; - /* adjust the main event selector */ + /* adjust the main event selector and extra register index */ if (reg1->idx % 2) { reg1->idx--; hwc->config -= 1 << NHMEX_R_PMON_CTL_EV_SEL_SHIFT; @@ -1522,29 +1552,17 @@ void nhmex_rbox_alter_er(struct intel_uncore_box *box, struct perf_event *event) hwc->config += 1 << NHMEX_R_PMON_CTL_EV_SEL_SHIFT; } - /* adjust address or config of extra register */ + /* adjust extra register config */ port = reg1->idx / 6 + box->pmu->pmu_idx * 4; switch (reg1->idx % 6) { - case 0: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG0(port); - break; - case 1: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG1(port); - break; case 2: - /* the 8~15 bits to the 0~7 bits */ + /* shift the 8~15 bits to the 0~7 bits */ reg1->config >>= 8; break; case 3: - /* the 0~7 bits to the 8~15 bits */ + /* shift the 0~7 bits to the 8~15 bits */ reg1->config <<= 8; break; - case 4: - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET1_MM_CFG(port); - break; - case 5: - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET2_MM_CFG(port); - break; }; } @@ -1671,7 +1689,7 @@ static int nhmex_rbox_hw_config(struct intel_uncore_box *box, struct perf_event struct hw_perf_event *hwc = &event->hw; struct hw_perf_event_extra *reg1 = &event->hw.extra_reg; struct hw_perf_event_extra *reg2 = &event->hw.branch_reg; - int port, idx; + int idx; idx = (event->hw.config & NHMEX_R_PMON_CTL_EV_SEL_MASK) >> NHMEX_R_PMON_CTL_EV_SEL_SHIFT; @@ -1681,27 +1699,11 @@ static int nhmex_rbox_hw_config(struct intel_uncore_box *box, struct perf_event reg1->idx = idx; reg1->config = event->attr.config1; - port = idx / 6 + box->pmu->pmu_idx * 4; - idx %= 6; - switch (idx) { - case 0: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG0(port); - break; - case 1: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG1(port); - break; - case 2: - case 3: - reg1->reg = NHMEX_R_MSR_PORTN_QLX_CFG(port); - break; + switch (idx % 6) { case 4: case 5: - if (idx == 4) - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET1_MM_CFG(port); - else - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET2_MM_CFG(port); - reg2->config = event->attr.config2; hwc->config |= event->attr.config & (~0ULL << 32); + reg2->config = event->attr.config2; break; }; return 0; @@ -1727,28 +1729,34 @@ static void nhmex_rbox_msr_enable_event(struct intel_uncore_box *box, struct per struct hw_perf_event *hwc = &event->hw; struct hw_perf_event_extra *reg1 = &hwc->extra_reg; struct hw_perf_event_extra *reg2 = &hwc->branch_reg; - int idx, er_idx; + int idx, port; - idx = reg1->idx % 6; - er_idx = idx; - if (er_idx > 2) - er_idx--; - er_idx += (reg1->idx / 6) * 5; + idx = reg1->idx; + port = idx / 6 + box->pmu->pmu_idx * 4; - switch (idx) { + switch (idx % 6) { case 0: + wrmsrl(NHMEX_R_MSR_PORTN_IPERF_CFG0(port), reg1->config); + break; case 1: - wrmsrl(reg1->reg, reg1->config); + wrmsrl(NHMEX_R_MSR_PORTN_IPERF_CFG1(port), reg1->config); break; case 2: case 3: - wrmsrl(reg1->reg, nhmex_rbox_shared_reg_config(box, er_idx)); + wrmsrl(NHMEX_R_MSR_PORTN_QLX_CFG(port), + nhmex_rbox_shared_reg_config(box, 2 + (idx / 6) * 5)); break; case 4: + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET1_MM_CFG(port), + hwc->config >> 32); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET1_MATCH(port), reg1->config); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET1_MASK(port), reg2->config); + break; case 5: - wrmsrl(reg1->reg, reg1->config); - wrmsrl(reg1->reg + 1, hwc->config >> 32); - wrmsrl(reg1->reg + 2, reg2->config); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET2_MM_CFG(port), + hwc->config >> 32); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET2_MATCH(port), reg1->config); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET2_MASK(port), reg2->config); break; }; @@ -1756,8 +1764,8 @@ static void nhmex_rbox_msr_enable_event(struct intel_uncore_box *box, struct per (hwc->config & NHMEX_R_PMON_CTL_EV_SEL_MASK)); } -DEFINE_UNCORE_FORMAT_ATTR(xbr_match, xbr_match, "config:32-63"); -DEFINE_UNCORE_FORMAT_ATTR(xbr_mm_cfg, xbr_mm_cfg, "config1:0-63"); +DEFINE_UNCORE_FORMAT_ATTR(xbr_mm_cfg, xbr_mm_cfg, "config:32-63"); +DEFINE_UNCORE_FORMAT_ATTR(xbr_match, xbr_match, "config1:0-63"); DEFINE_UNCORE_FORMAT_ATTR(xbr_mask, xbr_mask, "config2:0-63"); DEFINE_UNCORE_FORMAT_ATTR(qlx_cfg, qlx_cfg, "config1:0-15"); DEFINE_UNCORE_FORMAT_ATTR(iperf_cfg, iperf_cfg, "config1:0-31"); @@ -2303,6 +2311,7 @@ int uncore_pmu_event_init(struct perf_event *event) event->hw.idx = -1; event->hw.last_tag = ~0ULL; event->hw.extra_reg.idx = EXTRA_REG_NONE; + event->hw.branch_reg.idx = EXTRA_REG_NONE; if (event->attr.config == UNCORE_FIXED_EVENT) { /* no fixed counter */ @@ -2373,7 +2382,7 @@ static void __init uncore_type_exit(struct intel_uncore_type *type) type->attr_groups[1] = NULL; } -static void uncore_types_exit(struct intel_uncore_type **types) +static void __init uncore_types_exit(struct intel_uncore_type **types) { int i; for (i = 0; types[i]; i++) @@ -2814,7 +2823,13 @@ static int __init uncore_cpu_init(void) snbep_uncore_cbox.num_boxes = max_cores; msr_uncores = snbep_msr_uncores; break; - case 46: + case 46: /* Nehalem-EX */ + uncore_nhmex = true; + case 47: /* Westmere-EX aka. Xeon E7 */ + if (!uncore_nhmex) + nhmex_uncore_mbox.event_descs = wsmex_uncore_mbox_events; + if (nhmex_uncore_cbox.num_boxes > max_cores) + nhmex_uncore_cbox.num_boxes = max_cores; msr_uncores = nhmex_msr_uncores; break; default: diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.h b/arch/x86/kernel/cpu/perf_event_intel_uncore.h index f3851892e07..5b81c1856aa 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.h +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.h @@ -5,7 +5,7 @@ #include "perf_event.h" #define UNCORE_PMU_NAME_LEN 32 -#define UNCORE_PMU_HRTIMER_INTERVAL (60 * NSEC_PER_SEC) +#define UNCORE_PMU_HRTIMER_INTERVAL (60LL * NSEC_PER_SEC) #define UNCORE_FIXED_EVENT 0xff #define UNCORE_PMC_IDX_MAX_GENERIC 8 @@ -230,6 +230,7 @@ #define NHMEX_S1_MSR_MASK 0xe5a #define NHMEX_S_PMON_MM_CFG_EN (0x1ULL << 63) +#define NHMEX_S_EVENT_TO_R_PROG_EV 0 /* NHM-EX Mbox */ #define NHMEX_M0_MSR_GLOBAL_CTL 0xca0 @@ -275,18 +276,12 @@ NHMEX_M_PMON_CTL_INC_SEL_MASK | \ NHMEX_M_PMON_CTL_SET_FLAG_SEL_MASK) - -#define NHMEX_M_PMON_ZDP_CTL_FVC_FVID_MASK 0x1f -#define NHMEX_M_PMON_ZDP_CTL_FVC_BCMD_MASK (0x7 << 5) -#define NHMEX_M_PMON_ZDP_CTL_FVC_RSP_MASK (0x7 << 8) -#define NHMEX_M_PMON_ZDP_CTL_FVC_PBOX_INIT_ERR (1 << 23) -#define NHMEX_M_PMON_ZDP_CTL_FVC_MASK \ - (NHMEX_M_PMON_ZDP_CTL_FVC_FVID_MASK | \ - NHMEX_M_PMON_ZDP_CTL_FVC_BCMD_MASK | \ - NHMEX_M_PMON_ZDP_CTL_FVC_RSP_MASK | \ - NHMEX_M_PMON_ZDP_CTL_FVC_PBOX_INIT_ERR) +#define NHMEX_M_PMON_ZDP_CTL_FVC_MASK (((1 << 11) - 1) | (1 << 23)) #define NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(n) (0x7 << (11 + 3 * (n))) +#define WSMEX_M_PMON_ZDP_CTL_FVC_MASK (((1 << 12) - 1) | (1 << 24)) +#define WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(n) (0x7 << (12 + 3 * (n))) + /* * use the 9~13 bits to select event If the 7th bit is not set, * otherwise use the 19~21 bits to select event. @@ -368,6 +363,7 @@ struct intel_uncore_type { unsigned num_shared_regs:8; unsigned single_fixed:1; unsigned pair_ctr_ctl:1; + unsigned *msr_offsets; struct event_constraint unconstrainted; struct event_constraint *constraints; struct intel_uncore_pmu *pmus; @@ -485,29 +481,31 @@ unsigned uncore_pci_perf_ctr(struct intel_uncore_box *box, int idx) return idx * 8 + box->pmu->type->perf_ctr; } -static inline -unsigned uncore_msr_box_ctl(struct intel_uncore_box *box) +static inline unsigned uncore_msr_box_offset(struct intel_uncore_box *box) +{ + struct intel_uncore_pmu *pmu = box->pmu; + return pmu->type->msr_offsets ? + pmu->type->msr_offsets[pmu->pmu_idx] : + pmu->type->msr_offset * pmu->pmu_idx; +} + +static inline unsigned uncore_msr_box_ctl(struct intel_uncore_box *box) { if (!box->pmu->type->box_ctl) return 0; - return box->pmu->type->box_ctl + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + return box->pmu->type->box_ctl + uncore_msr_box_offset(box); } -static inline -unsigned uncore_msr_fixed_ctl(struct intel_uncore_box *box) +static inline unsigned uncore_msr_fixed_ctl(struct intel_uncore_box *box) { if (!box->pmu->type->fixed_ctl) return 0; - return box->pmu->type->fixed_ctl + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + return box->pmu->type->fixed_ctl + uncore_msr_box_offset(box); } -static inline -unsigned uncore_msr_fixed_ctr(struct intel_uncore_box *box) +static inline unsigned uncore_msr_fixed_ctr(struct intel_uncore_box *box) { - return box->pmu->type->fixed_ctr + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + return box->pmu->type->fixed_ctr + uncore_msr_box_offset(box); } static inline @@ -515,7 +513,7 @@ unsigned uncore_msr_event_ctl(struct intel_uncore_box *box, int idx) { return box->pmu->type->event_ctl + (box->pmu->type->pair_ctr_ctl ? 2 * idx : idx) + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + uncore_msr_box_offset(box); } static inline @@ -523,7 +521,7 @@ unsigned uncore_msr_perf_ctr(struct intel_uncore_box *box, int idx) { return box->pmu->type->perf_ctr + (box->pmu->type->pair_ctr_ctl ? 2 * idx : idx) + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + uncore_msr_box_offset(box); } static inline diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 1f5f1d5d2a0..7ad683d7864 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -328,6 +328,7 @@ void fixup_irqs(void) chip->irq_retrigger(data); raw_spin_unlock(&desc->lock); } + __this_cpu_write(vector_irq[vector], -1); } } #endif diff --git a/arch/x86/kernel/kdebugfs.c b/arch/x86/kernel/kdebugfs.c index 1d5d31ea686..dc1404bf8e4 100644 --- a/arch/x86/kernel/kdebugfs.c +++ b/arch/x86/kernel/kdebugfs.c @@ -107,7 +107,7 @@ static int __init create_setup_data_nodes(struct dentry *parent) { struct setup_data_node *node; struct setup_data *data; - int error = -ENOMEM; + int error; struct dentry *d; struct page *pg; u64 pa_data; @@ -121,8 +121,10 @@ static int __init create_setup_data_nodes(struct dentry *parent) while (pa_data) { node = kmalloc(sizeof(*node), GFP_KERNEL); - if (!node) + if (!node) { + error = -ENOMEM; goto err_dir; + } pg = pfn_to_page((pa_data+sizeof(*data)-1) >> PAGE_SHIFT); if (PageHighMem(pg)) { diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c index 1df8fb9e1d5..e498b18f010 100644 --- a/arch/x86/kvm/i8259.c +++ b/arch/x86/kvm/i8259.c @@ -316,6 +316,11 @@ static void pic_ioport_write(void *opaque, u32 addr, u32 val) addr &= 1; if (addr == 0) { if (val & 0x10) { + u8 edge_irr = s->irr & ~s->elcr; + int i; + bool found; + struct kvm_vcpu *vcpu; + s->init4 = val & 1; s->last_irr = 0; s->irr &= s->elcr; @@ -333,6 +338,18 @@ static void pic_ioport_write(void *opaque, u32 addr, u32 val) if (val & 0x08) pr_pic_unimpl( "level sensitive irq not supported"); + + kvm_for_each_vcpu(i, vcpu, s->pics_state->kvm) + if (kvm_apic_accept_pic_intr(vcpu)) { + found = true; + break; + } + + + if (found) + for (irq = 0; irq < PIC_NUM_PINS/2; irq++) + if (edge_irr & (1 << irq)) + pic_clear_isr(s, irq); } else if (val & 0x08) { if (val & 0x04) s->poll = 1; diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index c39b60707e0..c00f03de1b7 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -1488,13 +1488,6 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx) loadsegment(ds, vmx->host_state.ds_sel); loadsegment(es, vmx->host_state.es_sel); } -#else - /* - * The sysexit path does not restore ds/es, so we must set them to - * a reasonable value ourselves. - */ - loadsegment(ds, __USER_DS); - loadsegment(es, __USER_DS); #endif reload_tss(); #ifdef CONFIG_X86_64 @@ -6370,6 +6363,19 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu) #endif ); +#ifndef CONFIG_X86_64 + /* + * The sysexit path does not restore ds/es, so we must set them to + * a reasonable value ourselves. + * + * We can't defer this to vmx_load_host_state() since that function + * may be executed in interrupt context, which saves and restore segments + * around it, nullifying its effect. + */ + loadsegment(ds, __USER_DS); + loadsegment(es, __USER_DS); +#endif + vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP) | (1 << VCPU_EXREG_RFLAGS) | (1 << VCPU_EXREG_CPL) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 59b59508ff0..42bce48f692 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -925,6 +925,10 @@ static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock) */ getboottime(&boot); + if (kvm->arch.kvmclock_offset) { + struct timespec ts = ns_to_timespec(kvm->arch.kvmclock_offset); + boot = timespec_sub(boot, ts); + } wc.sec = boot.tv_sec; wc.nsec = boot.tv_nsec; wc.version = version; diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c index f6679a7fb8c..b91e4851242 100644 --- a/arch/x86/mm/hugetlbpage.c +++ b/arch/x86/mm/hugetlbpage.c @@ -56,9 +56,16 @@ static int vma_shareable(struct vm_area_struct *vma, unsigned long addr) } /* - * search for a shareable pmd page for hugetlb. + * Search for a shareable pmd page for hugetlb. In any case calls pmd_alloc() + * and returns the corresponding pte. While this is not necessary for the + * !shared pmd case because we can allocate the pmd later as well, it makes the + * code much cleaner. pmd allocation is essential for the shared case because + * pud has to be populated inside the same i_mmap_mutex section - otherwise + * racing tasks could either miss the sharing (see huge_pte_offset) or select a + * bad pmd for sharing. */ -static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) +static pte_t * +huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) { struct vm_area_struct *vma = find_vma(mm, addr); struct address_space *mapping = vma->vm_file->f_mapping; @@ -68,9 +75,10 @@ static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) struct vm_area_struct *svma; unsigned long saddr; pte_t *spte = NULL; + pte_t *pte; if (!vma_shareable(vma, addr)) - return; + return (pte_t *)pmd_alloc(mm, pud, addr); mutex_lock(&mapping->i_mmap_mutex); vma_prio_tree_foreach(svma, &iter, &mapping->i_mmap, idx, idx) { @@ -97,7 +105,9 @@ static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) put_page(virt_to_page(spte)); spin_unlock(&mm->page_table_lock); out: + pte = (pte_t *)pmd_alloc(mm, pud, addr); mutex_unlock(&mapping->i_mmap_mutex); + return pte; } /* @@ -142,8 +152,9 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, } else { BUG_ON(sz != PMD_SIZE); if (pud_none(*pud)) - huge_pmd_share(mm, addr, pud); - pte = (pte_t *) pmd_alloc(mm, pud, addr); + pte = huge_pmd_share(mm, addr, pud); + else + pte = (pte_t *)pmd_alloc(mm, pud, addr); } } BUG_ON(pte && !pte_none(*pte) && !pte_huge(*pte)); diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 931930a9616..a718e0d2350 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -919,13 +919,11 @@ static int change_page_attr_set_clr(unsigned long *addr, int numpages, /* * On success we use clflush, when the CPU supports it to - * avoid the wbindv. If the CPU does not support it, in the - * error case, and during early boot (for EFI) we fall back - * to cpa_flush_all (which uses wbinvd): + * avoid the wbindv. If the CPU does not support it and in the + * error case we fall back to cpa_flush_all (which uses + * wbindv): */ - if (early_boot_irqs_disabled) - __cpa_flush_all((void *)(long)cache); - else if (!ret && cpu_has_clflush) { + if (!ret && cpu_has_clflush) { if (cpa.flags & (CPA_PAGES_ARRAY | CPA_ARRAY)) { cpa_flush_array(addr, numpages, cache, cpa.flags, pages); diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c index 4599c3e8bcb..4ddf497ca65 100644 --- a/arch/x86/mm/srat.c +++ b/arch/x86/mm/srat.c @@ -142,23 +142,23 @@ static inline int save_add_info(void) {return 0;} #endif /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */ -void __init +int __init acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) { u64 start, end; int node, pxm; if (srat_disabled()) - return; + return -1; if (ma->header.length != sizeof(struct acpi_srat_mem_affinity)) { bad_srat(); - return; + return -1; } if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0) - return; + return -1; if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && !save_add_info()) - return; + return -1; start = ma->base_address; end = start + ma->length; pxm = ma->proximity_domain; @@ -168,12 +168,12 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) if (node < 0) { printk(KERN_ERR "SRAT: Too many proximity domains.\n"); bad_srat(); - return; + return -1; } if (numa_add_memblk(node, start, end) < 0) { bad_srat(); - return; + return -1; } node_set(node, numa_nodes_parsed); @@ -181,6 +181,7 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) printk(KERN_INFO "SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]\n", node, pxm, (unsigned long long) start, (unsigned long long) end - 1); + return 0; } void __init acpi_numa_arch_fixup(void) {} diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 2dc29f51e75..92660edaa1e 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -234,7 +234,22 @@ static efi_status_t __init phys_efi_set_virtual_address_map( return status; } -static int efi_set_rtc_mmss(unsigned long nowtime) +static efi_status_t __init phys_efi_get_time(efi_time_t *tm, + efi_time_cap_t *tc) +{ + unsigned long flags; + efi_status_t status; + + spin_lock_irqsave(&rtc_lock, flags); + efi_call_phys_prelog(); + status = efi_call_phys2(efi_phys.get_time, virt_to_phys(tm), + virt_to_phys(tc)); + efi_call_phys_epilog(); + spin_unlock_irqrestore(&rtc_lock, flags); + return status; +} + +int efi_set_rtc_mmss(unsigned long nowtime) { int real_seconds, real_minutes; efi_status_t status; @@ -263,7 +278,7 @@ static int efi_set_rtc_mmss(unsigned long nowtime) return 0; } -static unsigned long efi_get_time(void) +unsigned long efi_get_time(void) { efi_status_t status; efi_time_t eft; @@ -606,13 +621,18 @@ static int __init efi_runtime_init(void) } /* * We will only need *early* access to the following - * EFI runtime service before set_virtual_address_map + * two EFI runtime services before set_virtual_address_map * is invoked. */ + efi_phys.get_time = (efi_get_time_t *)runtime->get_time; efi_phys.set_virtual_address_map = (efi_set_virtual_address_map_t *) runtime->set_virtual_address_map; - + /* + * Make efi_get_time can be called before entering + * virtual mode. + */ + efi.get_time = phys_efi_get_time; early_iounmap(runtime, sizeof(efi_runtime_services_t)); return 0; @@ -700,10 +720,12 @@ void __init efi_init(void) efi_enabled = 0; return; } +#ifdef CONFIG_X86_32 if (efi_native) { x86_platform.get_wallclock = efi_get_time; x86_platform.set_wallclock = efi_set_rtc_mmss; } +#endif #if EFI_DEBUG print_efi_memmap(); diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile index b2d534cab25..88692871823 100644 --- a/arch/x86/realmode/rm/Makefile +++ b/arch/x86/realmode/rm/Makefile @@ -72,7 +72,7 @@ KBUILD_CFLAGS := $(LINUXINCLUDE) -m32 -g -Os -D_SETUP -D__KERNEL__ -D_WAKEUP \ -Wall -Wstrict-prototypes \ -march=i386 -mregparm=3 \ -include $(srctree)/$(src)/../../boot/code16gcc.h \ - -fno-strict-aliasing -fomit-frame-pointer \ + -fno-strict-aliasing -fomit-frame-pointer -fno-pic \ $(call cc-option, -ffreestanding) \ $(call cc-option, -fno-toplevel-reorder,\ $(call cc-option, -fno-unit-at-a-time)) \ diff --git a/arch/x86/syscalls/syscall_64.tbl b/arch/x86/syscalls/syscall_64.tbl index 51171aeff0d..a582bfed95b 100644 --- a/arch/x86/syscalls/syscall_64.tbl +++ b/arch/x86/syscalls/syscall_64.tbl @@ -60,8 +60,8 @@ 51 common getsockname sys_getsockname 52 common getpeername sys_getpeername 53 common socketpair sys_socketpair -54 common setsockopt sys_setsockopt -55 common getsockopt sys_getsockopt +54 64 setsockopt sys_setsockopt +55 64 getsockopt sys_getsockopt 56 common clone stub_clone 57 common fork stub_fork 58 common vfork stub_vfork @@ -318,7 +318,7 @@ 309 common getcpu sys_getcpu 310 64 process_vm_readv sys_process_vm_readv 311 64 process_vm_writev sys_process_vm_writev -312 64 kcmp sys_kcmp +312 common kcmp sys_kcmp # # x32-specific system call numbers start at 512 to avoid cache impact @@ -353,3 +353,5 @@ 538 x32 sendmmsg compat_sys_sendmmsg 539 x32 process_vm_readv compat_sys_process_vm_readv 540 x32 process_vm_writev compat_sys_process_vm_writev +541 x32 setsockopt compat_sys_setsockopt +542 x32 getsockopt compat_sys_getsockopt diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index 64effdc6da9..b2e91d40a4c 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -194,6 +194,11 @@ RESERVE_BRK(p2m_mid_mfn, PAGE_SIZE * (MAX_DOMAIN_PAGES / (P2M_PER_PAGE * P2M_MID * boundary violation will require three middle nodes. */ RESERVE_BRK(p2m_mid_identity, PAGE_SIZE * 2 * 3); +/* When we populate back during bootup, the amount of pages can vary. The + * max we have is seen is 395979, but that does not mean it can't be more. + * But some machines can have 3GB I/O holes even. So lets reserve enough + * for 4GB of I/O and E820 holes. */ +RESERVE_BRK(p2m_populated, PMD_SIZE * 4); static inline unsigned p2m_top_index(unsigned long pfn) { BUG_ON(pfn >= MAX_P2M_PFN); |