diff options
Diffstat (limited to 'arch')
56 files changed, 440 insertions, 454 deletions
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index f91395206a4..a0f07521ca8 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -22,7 +22,7 @@ #if defined(CONFIG_DEBUG_ICEDCC) @@ debug using ARM EmbeddedICE DCC channel - .macro addruart, rx, tmp + .macro addruart, rp, rv .endm #if defined(CONFIG_CPU_V6) @@ -121,6 +121,22 @@ wait: mrc p14, 0, pc, c0, c1, 0 #include <mach/debug-macro.S> #endif /* CONFIG_DEBUG_ICEDCC */ +#ifdef CONFIG_MMU + .macro addruart_current, rx, tmp1, tmp2 + addruart \tmp1, \tmp2 + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 + moveq \rx, \tmp1 + movne \rx, \tmp2 + .endm + +#else /* !CONFIG_MMU */ + .macro addruart_current, rx, tmp1, tmp2 + addruart \rx, \tmp1 + .endm + +#endif /* CONFIG_MMU */ + /* * Useful debugging routines */ @@ -155,7 +171,7 @@ ENDPROC(printhex2) .ltorg ENTRY(printascii) - addruart r3, r1 + addruart_current r3, r1, r2 b 2f 1: waituart r2, r3 senduart r1, r3 @@ -171,7 +187,7 @@ ENTRY(printascii) ENDPROC(printascii) ENTRY(printch) - addruart r3, r1 + addruart_current r3, r1, r2 mov r1, r0 mov r0, #0 b 1b diff --git a/arch/arm/mach-aaec2000/include/mach/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S index a9cac368bfe..bc7ad5561c4 100644 --- a/arch/arm/mach-aaec2000/include/mach/debug-macro.S +++ b/arch/arm/mach-aaec2000/include/mach/debug-macro.S @@ -10,12 +10,10 @@ */ #include "hardware.h" - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x80000000 @ physical - movne \rx, #io_p2v(0x80000000) @ virtual - orr \rx, \rx, #0x00000800 + .macro addruart, rp, rv + mov \rp, 0x00000800 + orr \rv, \rp, #io_p2v(0x80000000) @ virtual + orr \rp, \rp, #0x80000000 @ physical .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S index 9e750a1c1b5..0f959faf74a 100644 --- a/arch/arm/mach-at91/include/mach/debug-macro.S +++ b/arch/arm/mach-at91/include/mach/debug-macro.S @@ -14,11 +14,9 @@ #include <mach/hardware.h> #include <mach/at91_dbgu.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address) - ldrne \rx, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address) + .macro addruart, rp, rv + ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address) + ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address) .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S index 072cc6b61ba..507c6873b7e 100644 --- a/arch/arm/mach-clps711x/include/mach/debug-macro.S +++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S @@ -14,16 +14,14 @@ #include <mach/hardware.h> #include <asm/hardware/clps7111.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #CLPS7111_PHYS_BASE - movne \rx, #CLPS7111_VIRT_BASE + .macro addruart, rp, rv #ifndef CONFIG_DEBUG_CLPS711X_UART2 - add \rx, \rx, #0x0000 @ UART1 + mov \rp, #0x0000 @ UART1 #else - add \rx, \rx, #0x1000 @ UART2 + mov \rp, #0x1000 @ UART2 #endif + orr \rv, \rp, #CLPS7111_VIRT_BASE + orr \rp, \rp, #CLPS7111_PHYS_BASE .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S index d16ce7eb00e..56d828634db 100644 --- a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S +++ b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S @@ -10,12 +10,10 @@ * published by the Free Software Foundation. */ - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x10000000 - movne \rx, #0xf0000000 @ virtual base - orr \rx, \rx, #0x00009000 + .macro addruart,rp,rv + mov \rp, #0x00009000 + orr \rv, \rp, #0xf0000000 @ virtual base + orr \rp, \rp, #0x10000000 .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index f761dfdb868..9f1befc5ac3 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -29,35 +29,39 @@ davinci_uart_phys: .word 0 davinci_uart_virt: .word 0 .popsection - .macro addruart, rx, tmp + .macro addruart, rp, rv /* Use davinci_uart_phys/virt if already configured */ -10: mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =__virt_to_phys(davinci_uart_phys) - ldrne \rx, =davinci_uart_virt - ldr \rx, [\rx] - cmp \rx, #0 @ is port configured? +10: mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? + ldreq \rp, =__virt_to_phys(davinci_uart_phys) + ldrne \rp, =davinci_uart_phys + add \rv, \rp, #4 @ davinci_uart_virt + ldr \rp, [\rp, #0] + ldr \rv, [\rv, #0] + cmp \rp, #0 @ is port configured? + cmpne \rv, #0 bne 99f @ already configured - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? + /* Check the debug UART address set in uncompress.h */ + mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? /* Copy uart phys address from decompressor uart info */ - ldreq \tmp, =__virt_to_phys(davinci_uart_phys) - ldrne \tmp, =davinci_uart_phys - ldreq \rx, =DAVINCI_UART_INFO - ldrne \rx, =__phys_to_virt(DAVINCI_UART_INFO) - ldr \rx, [\rx, #0] - str \rx, [\tmp] + ldreq \rv, =__virt_to_phys(davinci_uart_phys) + ldrne \rv, =davinci_uart_phys + ldreq \rp, =DAVINCI_UART_INFO + ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO) + ldr \rp, [\rp, #0] + str \rp, [\rv] /* Copy uart virt address from decompressor uart info */ - ldreq \tmp, =__virt_to_phys(davinci_uart_virt) - ldrne \tmp, =davinci_uart_virt - ldreq \rx, =DAVINCI_UART_INFO - ldrne \rx, =__phys_to_virt(DAVINCI_UART_INFO) - ldr \rx, [\rx, #4] - str \rx, [\tmp] + ldreq \rv, =__virt_to_phys(davinci_uart_virt) + ldrne \rv, =davinci_uart_virt + ldreq \rp, =DAVINCI_UART_INFO + ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO) + ldr \rp, [\rp, #4] + str \rp, [\rv] b 10b 99: diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S index 1521d13f1d1..da8bf2bad3b 100644 --- a/arch/arm/mach-dove/include/mach/debug-macro.S +++ b/arch/arm/mach-dove/include/mach/debug-macro.S @@ -8,12 +8,11 @@ #include <mach/bridge-regs.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =DOVE_SB_REGS_PHYS_BASE - ldrne \rx, =DOVE_SB_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 + .macro addruart, rp, rv + ldr \rp, =DOVE_SB_REGS_PHYS_BASE + ldr \rv, =DOVE_SB_REGS_VIRT_BASE + orr \rp, \rp, #0x00012000 + orr \rv, \rv, #0x00012000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S index ebbd89f0e6c..7ef5690fd08 100644 --- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S +++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S @@ -11,9 +11,10 @@ * **/ - .macro addruart, rx, tmp - mov \rx, #0xf0000000 - orr \rx, \rx, #0x00000be0 + .macro addruart, rp, rv + mov \rp, #0xf0000000 + orr \rp, \rp, #0x00000be0 + mov \rp, \rv .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S index 5cd22444e22..b25bc907636 100644 --- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S @@ -11,12 +11,11 @@ */ #include <mach/ep93xx-regs.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =EP93XX_APB_PHYS_BASE @ Physical base - ldrne \rx, =EP93XX_APB_VIRT_BASE @ virtual base - orr \rx, \rx, #0x000c0000 + .macro addruart, rp, rv + ldr \rp, =EP93XX_APB_PHYS_BASE @ Physical base + ldr \rv, =EP93XX_APB_VIRT_BASE @ virtual base + orr \rp, \rp, #0x000c0000 + orr \rv, \rv, #0x000c0000 .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S index 60dda1318f2..3c9e0c40c67 100644 --- a/arch/arm/mach-footbridge/include/mach/debug-macro.S +++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S @@ -15,12 +15,10 @@ #ifndef CONFIG_DEBUG_DC21285_PORT /* For NetWinder debugging */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x7c000000 @ physical - movne \rx, #0xff000000 @ virtual - orr \rx, \rx, #0x000003f8 + .macro addruart, rp, rv + mov \rp, #0x000003f8 + orr \rv, \rp, #0x7c000000 @ physical + orr \rp, \rp, #0xff000000 @ virtual .endm #define UART_SHIFT 0 @@ -32,14 +30,14 @@ .equ dc21285_high, ARMCSR_BASE & 0xff000000 .equ dc21285_low, ARMCSR_BASE & 0x00ffffff - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x42000000 - movne \rx, #dc21285_high + .macro addruart, rp, rv .if dc21285_low - orrne \rx, \rx, #dc21285_low + mov \rp, #dc21285_low + .else + mov \rp, #0 .endif + orr \rv, \rp, #0x42000000 + orr \rp, \rp, #dc21285_high .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S index ad477047069..f40e006d296 100644 --- a/arch/arm/mach-gemini/include/mach/debug-macro.S +++ b/arch/arm/mach-gemini/include/mach/debug-macro.S @@ -11,11 +11,9 @@ */ #include <mach/hardware.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =GEMINI_UART_BASE @ physical - ldrne \rx, =IO_ADDRESS(GEMINI_UART_BASE) @ virtual + .macro addruart, rp, rv + ldr \rp, =GEMINI_UART_BASE @ physical + ldr \rv, =IO_ADDRESS(GEMINI_UART_BASE) @ virtual .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S index 27cafd12f03..c2093e83572 100644 --- a/arch/arm/mach-h720x/include/mach/debug-macro.S +++ b/arch/arm/mach-h720x/include/mach/debug-macro.S @@ -16,12 +16,10 @@ .equ io_virt, IO_VIRT .equ io_phys, IO_PHYS - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #io_phys @ physical base address - movne \rx, #io_virt @ virtual address - add \rx, \rx, #0x00020000 @ UART1 + .macro addruart, rp, rv + mov \rp, #0x00020000 @ UART1 + add \rv, \rp, #io_virt @ virtual address + add \rp, \rp, #io_phys @ physical base address .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S index 87a6888ae01..a1f598fd3a5 100644 --- a/arch/arm/mach-integrator/include/mach/debug-macro.S +++ b/arch/arm/mach-integrator/include/mach/debug-macro.S @@ -11,12 +11,10 @@ * */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x16000000 @ physical base address - movne \rx, #0xf0000000 @ virtual base - addne \rx, \rx, #0x16000000 >> 4 + .macro addruart, rp, rv + mov \rp, #0x16000000 @ physical base address + mov \rv, #0xf0000000 @ virtual base + add \rv, \rv, #0x16000000 >> 4 .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S index c9d6ba46963..e664466d51b 100644 --- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S +++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S @@ -11,15 +11,13 @@ * published by the Free Software Foundation. */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ mmu enabled? - moveq \rx, #0xff000000 @ physical - orreq \rx, \rx, #0x00d80000 - movne \rx, #0xfe000000 @ virtual - orrne \rx, \rx, #0x00e80000 - orr \rx, \rx, #0x00002300 - orr \rx, \rx, #0x00000040 + .macro addruart, rp, rv + mov \rp, #0x00002300 + orr \rp, \rp, #0x00000040 + orr \rv, \rp, #0xfe000000 @ virtual + orr \rv, \rv, #0x00e80000 + orr \rp, \rp, #0xff000000 @ physical + orr \rp, \rp, #0x00d80000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S index 736afe1edd1..ff9e76c09f3 100644 --- a/arch/arm/mach-iop32x/include/mach/debug-macro.S +++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S @@ -11,9 +11,10 @@ * published by the Free Software Foundation. */ - .macro addruart, rx, tmp - mov \rx, #0xfe000000 @ physical as well as virtual - orr \rx, \rx, #0x00800000 @ location of the UART + .macro addruart, rp, rv + mov \rp, #0xfe000000 @ physical as well as virtual + orr \rp, \rp, #0x00800000 @ location of the UART + mov \rv, \rp .endm #define UART_SHIFT 0 diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S index addb2da7842..40c500dd1fa 100644 --- a/arch/arm/mach-iop33x/include/mach/debug-macro.S +++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S @@ -11,13 +11,11 @@ * published by the Free Software Foundation. */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ mmu enabled? - moveq \rx, #0xff000000 @ physical - movne \rx, #0xfe000000 @ virtual - orr \rx, \rx, #0x00ff0000 - orr \rx, \rx, #0x0000f700 + .macro addruart, rp, rv + mov \rp, #0x00ff0000 + orr \rp, \rp, #0x0000f700 + orr \rv, #0xfe000000 @ virtual + orr \rp, #0xff000000 @ physical .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S index 6a827681680..0ef533b2097 100644 --- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S @@ -11,16 +11,14 @@ * */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0xc0000000 @ Physical base - movne \rx, #0xfe000000 @ virtual base - orrne \rx, \rx, #0x00f00000 - orr \rx, \rx, #0x00030000 + .macro addruart, rp, rv + mov \rp, #0x00030000 #ifdef __ARMEB__ - orr \rx, \rx, #0x00000003 + orr \rp, \rp, #0x00000003 #endif + orr \rv, \rp, #0xfe000000 @ virtual base + orr \rv, \rv, #0x00f00000 + orr \rp, \rp, #0xc0000000 @ Physical base .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S index a82e375465e..f7c6eef7fa2 100644 --- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S @@ -12,13 +12,12 @@ */ #include <mach/ixp23xx.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ mmu enabled? - ldreq \rx, =IXP23XX_PERIPHERAL_PHYS @ physical - ldrne \rx, =IXP23XX_PERIPHERAL_VIRT @ virtual + .macro addruart, rp, rv + ldr \rp, =IXP23XX_PERIPHERAL_PHYS @ physical + ldr \rv, =IXP23XX_PERIPHERAL_VIRT @ virtual #ifdef __ARMEB__ - orr \rx, \rx, #0x00000003 + orr \rp, \rp, #0x00000003 + orr \rv, \rv, #0x00000003 #endif .endm diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S index 3fc66d6d00a..b974a49c0af 100644 --- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S @@ -10,16 +10,16 @@ * published by the Free Software Foundation. */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0xc8000000 - movne \rx, #0xff000000 - orrne \rx, \rx, #0x00b00000 + .macro addruart, rp, rv #ifdef __ARMEB__ - add \rx,\rx,#3 @ Uart regs are at off set of 3 if - @ byte writes used - Big Endian. + mov \rp, #3 @ Uart regs are at off set of 3 if + @ byte writes used - Big Endian. +#else + mov \rp, #0 #endif + orr \rv, \rp, #0xff000000 @ virtual + orr \rv, \rv, #0x00b00000 + orr \rp, \rp, #0xc8000000 @ physical .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S index d0606774dea..db06ae437d0 100644 --- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S +++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S @@ -8,12 +8,11 @@ #include <mach/bridge-regs.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =KIRKWOOD_REGS_PHYS_BASE - ldrne \rx, =KIRKWOOD_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 + .macro addruart, rp, rv + ldr \rp, =KIRKWOOD_REGS_PHYS_BASE + ldr \rv, =KIRKWOOD_REGS_VIRT_BASE + orr \rp, \rp, #0x00012000 + orr \rv, \rv, #0x00012000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S index cf2095da237..bf516adf192 100644 --- a/arch/arm/mach-ks8695/include/mach/debug-macro.S +++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S @@ -14,11 +14,9 @@ #include <mach/hardware.h> #include <mach/regs-uart.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =KS8695_UART_PA @ physical base address - ldrne \rx, =KS8695_UART_VA @ virtual base address + .macro addruart, rp, rv + ldr \rp, =KS8695_UART_PA @ physical base address + ldr \rv, =KS8695_UART_VA @ virtual base address .endm .macro senduart, rd, rx diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S new file mode 100644 index 00000000000..b0a2db77d39 --- /dev/null +++ b/arch/arm/mach-l7200/include/mach/debug-macro.S @@ -0,0 +1,38 @@ +/* arch/arm/mach-l7200/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + + .equ io_virt, IO_BASE + .equ io_phys, IO_START + + .macro addruart, rp, rv + mov \rp, #0x00044000 @ UART1 +@ mov \rp, #0x00045000 @ UART2 + add \rv, \rp, #io_virt @ virtual address + add \rp, \rp, #io_phys @ physical base address + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #0x0] @ UARTDR + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #0x18] @ UARTFLG + tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full + bne 1001b + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #0x18] @ UARTFLG + tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy + bne 1001b + .endm diff --git a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S index c0dcbbba22b..cff33625276 100644 --- a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S +++ b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S @@ -14,12 +14,10 @@ @ It is not known if this will be appropriate for every 40x @ board. - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - mov \rx, #0x00000700 @ offset from base - orreq \rx, \rx, #0x80000000 @ physical base - orrne \rx, \rx, #0xf8000000 @ virtual base + .macro addruart, rp, rv + mov \rp, #0x00000700 @ offset from base + orr \rv, \rp, #0xf8000000 @ virtual base + orr \rp, \rp, #0x80000000 @ physical base .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-loki/include/mach/debug-macro.S b/arch/arm/mach-loki/include/mach/debug-macro.S index 3136c913a92..cc90d99ac76 100644 --- a/arch/arm/mach-loki/include/mach/debug-macro.S +++ b/arch/arm/mach-loki/include/mach/debug-macro.S @@ -8,12 +8,11 @@ #include <mach/loki.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =LOKI_REGS_PHYS_BASE - ldrne \rx, =LOKI_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 + .macro addruart, rp, rv + ldr \rp, =LOKI_REGS_PHYS_BASE + ldr \rv, =LOKI_REGS_VIRT_BASE + orr \rp, \rp, #0x00012000 + orr \rv, \rv, #0x00012000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S index 621744d6b15..629e744aeb9 100644 --- a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S +++ b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S @@ -20,11 +20,9 @@ * Debug output is hardcoded to standard UART 5 */ - .macro addruart,rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =0x40090000 - ldrne \rx, =0xF4090000 + .macro addruart, rp, rv + ldreq \rp, =0x40090000 + ldrne \rv, =0xF4090000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S index 76deff238e1..7e2ebd3efc7 100644 --- a/arch/arm/mach-mmp/include/mach/debug-macro.S +++ b/arch/arm/mach-mmp/include/mach/debug-macro.S @@ -11,12 +11,11 @@ #include <mach/addr-map.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =APB_PHYS_BASE @ physical - ldrne \rx, =APB_VIRT_BASE @ virtual - orr \rx, \rx, #0x00017000 + .macro addruart, rp, rv + ldr \rp, =APB_PHYS_BASE @ physical + ldr \rv, =APB_VIRT_BASE @ virtual + orr \rp, \rp, #0x00017000 + orr \rv, \rv, #0x00017000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S index 238c4f132cd..fbd5d90dcc8 100644 --- a/arch/arm/mach-msm/include/mach/debug-macro.S +++ b/arch/arm/mach-msm/include/mach/debug-macro.S @@ -20,12 +20,9 @@ #include <mach/msm_iomap.h> #ifdef CONFIG_HAS_MSM_DEBUG_UART_PHYS - .macro addruart, rx, tmp - @ see if the MMU is enabled and select appropriate base address - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, =MSM_DEBUG_UART_PHYS - ldrne \rx, =MSM_DEBUG_UART_BASE + .macro addruart, rp, rv + ldr \rp, =MSM_DEBUG_UART_PHYS + ldr \rv, =MSM_DEBUG_UART_BASE .endm .macro senduart,rd,rx @@ -39,16 +36,7 @@ tst \rd, #0x04 beq 1001b .endm -#else - .macro addruart, rx, tmp - .endm - - .macro senduart,rd,rx - .endm - - .macro waituart,rd,rx - .endm -#endif .macro busyuart,rd,rx .endm +#endif diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S index cd81689c462..04891428e48 100644 --- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S +++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S @@ -8,12 +8,11 @@ #include <mach/mv78xx0.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =MV78XX0_REGS_PHYS_BASE - ldrne \rx, =MV78XX0_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 + .macro addruart, rp, rv + ldr \rp, =MV78XX0_REGS_PHYS_BASE + ldr \rv, =MV78XX0_REGS_VIRT_BASE + orr \rp, \rp, #0x00012000 + orr \rv, \rv, #0x00012000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S index e96339e71d8..56a91522818 100644 --- a/arch/arm/mach-netx/include/mach/debug-macro.S +++ b/arch/arm/mach-netx/include/mach/debug-macro.S @@ -13,12 +13,10 @@ #include "hardware.h" - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x00100000 @ physical - movne \rx, #io_p2v(0x00100000) @ virtual - orr \rx, \rx, #0x00000a00 + .macro addruart, rp, rv + mov \rp, #0x00000a00 + orr \rv, \rp, #io_p2v(0x00100000) @ virtual + orr \rp, \rp, #0x00100000 @ physical .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S index 4f92acfba95..e7151b4b888 100644 --- a/arch/arm/mach-nomadik/include/mach/debug-macro.S +++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S @@ -10,13 +10,11 @@ * */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x10000000 @ physical base address - movne \rx, #0xf0000000 @ virtual base - add \rx, \rx, #0x00100000 - add \rx, \rx, #0x000fb000 + .macro addruart, rp, rv + mov \rp, #0x00100000 + add \rp, \rp, #0x000fb000 + add \rv, \rp, #0xf0000000 @ virtual base + add \rp, \rp, #0x10000000 @ physical base address .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S index 5c934bdb715..5a2acbdc3d6 100644 --- a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S +++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S @@ -12,11 +12,9 @@ #include <mach/regs-board-a9m9750dev.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, =NS9XXX_CSxSTAT_PHYS(0) - ldrne \rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0)) + .macro addruart, rp, rv + ldr \rp, =NS9XXX_CSxSTAT_PHYS(0) + ldr \rv, =io_p2v(NS9XXX_CSxSTAT_PHYS(0)) .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S index 671408eb4ab..6a0fa046236 100644 --- a/arch/arm/mach-omap1/include/mach/debug-macro.S +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -28,56 +28,58 @@ omap_uart_virt: .word 0x0 * the desired UART phys and virt addresses temporarily into * the omap_uart_phys and omap_uart_virt above. */ - .macro addruart, rx, tmp + .macro addruart, rp, rv /* Use omap_uart_phys/virt if already configured */ -9: mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =__virt_to_phys(omap_uart_phys) @ physical base address - ldrne \rx, =omap_uart_virt @ virtual base - ldr \rx, [\rx, #0] - cmp \rx, #0 @ is port configured? +9: mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? + ldreq \rp, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldrne \rp, =omap_uart_phys @ MMU enabled + add \rv, \rp, #4 @ omap_uart_virt + ldr \rp, [\rp, #0] + ldr \rv, [\rv, #0] + cmp \rp, #0 @ is port configured? + cmpne \rv, #0 bne 99f @ already configured /* Check the debug UART configuration set in uncompress.h */ - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =OMAP_UART_INFO - ldrne \rx, =__phys_to_virt(OMAP_UART_INFO) - ldr \rx, [\rx, #0] + mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? + ldreq \rp, =OMAP_UART_INFO @ MMU not enabled + ldrne \rp, =__phys_to_virt(OMAP_UART_INFO) @ MMU enabled + ldr \rp, [\rp, #0] /* Select the UART to use based on the UART1 scratchpad value */ -10: cmp \rx, #0 @ no port configured? +10: cmp \rp, #0 @ no port configured? beq 11f @ if none, try to use UART1 - cmp \rx, #OMAP1UART1 + cmp \rp, #OMAP1UART1 beq 11f @ configure OMAP1UART1 - cmp \rx, #OMAP1UART2 + cmp \rp, #OMAP1UART2 beq 12f @ configure OMAP1UART2 - cmp \rx, #OMAP1UART3 + cmp \rp, #OMAP1UART3 beq 13f @ configure OMAP2UART3 /* Configure the UART offset from the phys/virt base */ -11: mov \rx, #0x00fb0000 @ OMAP1UART1 +11: mov \rp, #0x00fb0000 @ OMAP1UART1 b 98f -12: mov \rx, #0x00fb0000 @ OMAP1UART1 - orr \rx, \rx, #0x00000800 @ OMAP1UART2 +12: mov \rp, #0x00fb0000 @ OMAP1UART1 + orr \rp, \rp, #0x00000800 @ OMAP1UART2 b 98f -13: mov \rx, #0x00fb0000 @ OMAP1UART1 - orr \rx, \rx, #0x00000800 @ OMAP1UART2 - orr \rx, \rx, #0x00009000 @ OMAP1UART3 +13: mov \rp, #0x00fb0000 @ OMAP1UART1 + orr \rp, \rp, #0x00000800 @ OMAP1UART2 + orr \rp, \rp, #0x00009000 @ OMAP1UART3 /* Store both phys and virt address for the uart */ -98: add \rx, \rx, #0xff000000 @ phys base - mrc p15, 0, \tmp, c1, c0 - tst \tmp, #1 @ MMU enabled? - ldreq \tmp, =__virt_to_phys(omap_uart_phys) - ldrne \tmp, =omap_uart_phys - str \rx, [\tmp, #0] - sub \rx, \rx, #0xff000000 @ phys base - add \rx, \rx, #0xfe000000 @ virt base - ldreq \tmp, =__virt_to_phys(omap_uart_virt) - ldrne \tmp, =omap_uart_virt - str \rx, [\tmp, #0] +98: add \rp, \rp, #0xff000000 @ phys base + mrc p15, 0, \rv, c1, c0 + tst \rv, #1 @ MMU enabled? + ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldrne \rv, =omap_uart_phys @ MMU enabled + str \rp, [\rv, #0] + sub \rp, \rp, #0xff000000 @ phys base + add \rp, \rp, #0xfe000000 @ virt base + add \rv, \rv, #4 @ omap_uart_lsr + str \rp, [\rv, #0] b 9b 99: .endm diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index 09331bbbda5..6a4d4136002 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -31,95 +31,94 @@ omap_uart_lsr: .word 0 * the desired UART phys and virt addresses temporarily into * the omap_uart_phys and omap_uart_virt above. */ - .macro addruart, rx, tmp + .macro addruart, rp, rv /* Use omap_uart_phys/virt if already configured */ -10: mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =__virt_to_phys(omap_uart_phys) @ physical base address - ldrne \rx, =omap_uart_virt @ virtual base address - ldr \rx, [\rx, #0] - cmp \rx, #0 @ is port configured? +10: mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? + ldreq \rp, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldrne \rp, =omap_uart_phys @ MMU enabled + add \rv, \rp, #4 @ omap_uart_virt + ldr \rp, [\rp, #0] + ldr \rv, [\rv, #0] + cmp \rp, #0 @ is port configured? + cmpne \rv, #0 bne 99f @ already configured /* Check the debug UART configuration set in uncompress.h */ - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =OMAP_UART_INFO - ldrne \rx, =__phys_to_virt(OMAP_UART_INFO) - ldr \rx, [\rx, #0] + mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? + ldreq \rp, =OMAP_UART_INFO @ MMU not enabled + ldrne \rp, =__phys_to_virt(OMAP_UART_INFO) @ MMU enabled + ldr \rp, [\rp, #0] /* Select the UART to use based on the UART1 scratchpad value */ - cmp \rx, #0 @ no port configured? + cmp \rp, #0 @ no port configured? beq 21f @ if none, try to use UART1 - cmp \rx, #OMAP2UART1 @ OMAP2/3/4UART1 + cmp \rp, #OMAP2UART1 @ OMAP2/3/4UART1 beq 21f @ configure OMAP2/3/4UART1 - cmp \rx, #OMAP2UART2 @ OMAP2/3/4UART2 + cmp \rp, #OMAP2UART2 @ OMAP2/3/4UART2 beq 22f @ configure OMAP2/3/4UART2 - cmp \rx, #OMAP2UART3 @ only on 24xx + cmp \rp, #OMAP2UART3 @ only on 24xx beq 23f @ configure OMAP2UART3 - cmp \rx, #OMAP3UART3 @ only on 34xx + cmp \rp, #OMAP3UART3 @ only on 34xx beq 33f @ configure OMAP3UART3 - cmp \rx, #OMAP4UART3 @ only on 44xx + cmp \rp, #OMAP4UART3 @ only on 44xx beq 43f @ configure OMAP4UART3 - cmp \rx, #OMAP3UART4 @ only on 36xx + cmp \rp, #OMAP3UART4 @ only on 36xx beq 34f @ configure OMAP3UART4 - cmp \rx, #OMAP4UART4 @ only on 44xx + cmp \rp, #OMAP4UART4 @ only on 44xx beq 44f @ configure OMAP4UART4 - cmp \rx, #ZOOM_UART @ only on zoom2/3 + cmp \rp, #ZOOM_UART @ only on zoom2/3 beq 95f @ configure ZOOM_UART /* Configure the UART offset from the phys/virt base */ -21: mov \rx, #UART_OFFSET(OMAP2_UART1_BASE) @ omap2/3/4 +21: mov \rp, #UART_OFFSET(OMAP2_UART1_BASE) @ omap2/3/4 b 98f -22: mov \rx, #UART_OFFSET(OMAP2_UART2_BASE) @ omap2/3/4 +22: mov \rp, #UART_OFFSET(OMAP2_UART2_BASE) @ omap2/3/4 b 98f -23: mov \rx, #UART_OFFSET(OMAP2_UART3_BASE) +23: mov \rp, #UART_OFFSET(OMAP2_UART3_BASE) b 98f -33: mov \rx, #UART_OFFSET(OMAP3_UART1_BASE) - add \rx, \rx, #0x00fb0000 - add \rx, \rx, #0x00006000 @ OMAP3_UART3_BASE +33: mov \rp, #UART_OFFSET(OMAP3_UART1_BASE) + add \rp, \rp, #0x00fb0000 + add \rp, \rp, #0x00006000 @ OMAP3_UART3_BASE b 98f -34: mov \rx, #UART_OFFSET(OMAP3_UART1_BASE) - add \rx, \rx, #0x00fb0000 - add \rx, \rx, #0x00028000 @ OMAP3_UART4_BASE +34: mov \rp, #UART_OFFSET(OMAP3_UART1_BASE) + add \rp, \rp, #0x00fb0000 + add \rp, \rp, #0x00028000 @ OMAP3_UART4_BASE b 98f -43: mov \rx, #UART_OFFSET(OMAP4_UART3_BASE) +43: mov \rp, #UART_OFFSET(OMAP4_UART3_BASE) b 98f -44: mov \rx, #UART_OFFSET(OMAP4_UART4_BASE) +44: mov \rp, #UART_OFFSET(OMAP4_UART4_BASE) b 98f -95: ldr \rx, =ZOOM_UART_BASE - mrc p15, 0, \tmp, c1, c0 - tst \tmp, #1 @ MMU enabled? - ldreq \tmp, =__virt_to_phys(omap_uart_phys) - ldrne \tmp, =omap_uart_phys - str \rx, [\tmp, #0] - ldr \rx, =ZOOM_UART_VIRT - ldreq \tmp, =__virt_to_phys(omap_uart_virt) - ldrne \tmp, =omap_uart_virt - str \rx, [\tmp, #0] - mov \rx, #(UART_LSR << ZOOM_PORT_SHIFT) - ldreq \tmp, =__virt_to_phys(omap_uart_lsr) - ldrne \tmp, =omap_uart_lsr - str \rx, [\tmp, #0] +95: ldr \rp, =ZOOM_UART_BASE + mrc p15, 0, \rv, c1, c0 + tst \rv, #1 @ MMU enabled? + ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldrne \rv, =omap_uart_phys @ MMU enabled + str \rp, [\rv, #0] + ldr \rp, =ZOOM_UART_VIRT + add \rv, \rv, #4 @ omap_uart_virt + str \rp, [\rv, #0] + mov \rp, #(UART_LSR << ZOOM_PORT_SHIFT) + add \rv, \rv, #4 @ omap_uart_lsr + str \rp, [\rv, #0] b 10b /* Store both phys and virt address for the uart */ -98: add \rx, \rx, #0x48000000 @ phys base - mrc p15, 0, \tmp, c1, c0 - tst \tmp, #1 @ MMU enabled? - ldreq \tmp, =__virt_to_phys(omap_uart_phys) - ldrne \tmp, =omap_uart_phys - str \rx, [\tmp, #0] - sub \rx, \rx, #0x48000000 @ phys base - add \rx, \rx, #0xfa000000 @ virt base - ldreq \tmp, =__virt_to_phys(omap_uart_virt) - ldrne \tmp, =omap_uart_virt - str \rx, [\tmp, #0] - mov \rx, #(UART_LSR << OMAP_PORT_SHIFT) - ldreq \tmp, =__virt_to_phys(omap_uart_lsr) - ldrne \tmp, =omap_uart_lsr - str \rx, [\tmp, #0] +98: add \rp, \rp, #0x48000000 @ phys base + mrc p15, 0, \rv, c1, c0 + tst \rv, #1 @ MMU enabled? + ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldrne \rv, =omap_uart_phys @ MMU enabled + str \rp, [\rv, #0] + sub \rp, \rp, #0x48000000 @ phys base + add \rp, \rp, #0xfa000000 @ virt base + add \rv, \rv, #4 @ omap_uart_virt + str \rp, [\rv, #0] + mov \rp, #(UART_LSR << OMAP_PORT_SHIFT) + add \rv, \rv, #4 @ omap_uart_lsr + str \rp, [\rv, #0] b 10b 99: @@ -131,9 +130,9 @@ omap_uart_lsr: .word 0 .macro busyuart,rd,rx 1001: mrc p15, 0, \rd, c1, c0 - tst \rd, #1 @ MMU enabled? - ldreq \rd, =__virt_to_phys(omap_uart_lsr) - ldrne \rd, =omap_uart_lsr + tst \rd, #1 @ MMU enabled? + ldreq \rd, =__virt_to_phys(omap_uart_lsr) @ MMU not enabled + ldrne \rd, =omap_uart_lsr @ MMU enabled ldr \rd, [\rd, #0] ldrb \rd, [\rx, \rd] and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE) diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S index 91e0e39bb23..5e3bf5b68ae 100644 --- a/arch/arm/mach-orion5x/include/mach/debug-macro.S +++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S @@ -10,12 +10,11 @@ #include <mach/orion5x.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =ORION5X_REGS_PHYS_BASE - ldrne \rx, =ORION5X_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 + .macro addruart, rp, rv + ldr \rp, =ORION5X_REGS_PHYS_BASE + ldr \rv, =ORION5X_REGS_VIRT_BASE + orr \rp, \rp, #0x00012000 + orr \rv, \rv, #0x00012000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S index 6ca8bd30bf4..931afebaf06 100644 --- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S +++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S @@ -11,12 +11,10 @@ * */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - mov \rx, #0x00090000 - addeq \rx, \rx, #0x40000000 - addne \rx, \rx, #0xf4000000 + .macro addruart, rp, rv + mov \rp, #0x00090000 + add \rv, \rp, #0xf4000000 @ virtual + add \rp, \rp, #0x40000000 @ physical .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S index 01cf81393fe..7d5c75125d6 100644 --- a/arch/arm/mach-pxa/include/mach/debug-macro.S +++ b/arch/arm/mach-pxa/include/mach/debug-macro.S @@ -13,12 +13,10 @@ #include "hardware.h" - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x40000000 @ physical - movne \rx, #io_p2v(0x40000000) @ virtual - orr \rx, \rx, #0x00100000 + .macro addruart, rp, rv + mov \rp, #0x00100000 + orr \rv, \rp, #io_p2v(0x40000000) @ virtual + orr \rp, \rp, #0x40000000 @ physical .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S index 86622289b74..90b687cbe04 100644 --- a/arch/arm/mach-realview/include/mach/debug-macro.S +++ b/arch/arm/mach-realview/include/mach/debug-macro.S @@ -33,12 +33,10 @@ #error "Unknown RealView platform" #endif - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x10000000 - movne \rx, #0xfb000000 @ virtual base - orr \rx, \rx, #DEBUG_LL_UART_OFFSET + .macro addruart, rp, rv + mov \rp, #DEBUG_LL_UART_OFFSET + orr \rv, \rp, #0xfb000000 @ virtual base + orr \rp, \rp, #0x10000000 @ physical base .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S index 6fc8d66395d..85effffdc2b 100644 --- a/arch/arm/mach-rpc/include/mach/debug-macro.S +++ b/arch/arm/mach-rpc/include/mach/debug-macro.S @@ -11,13 +11,11 @@ * */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x03000000 - movne \rx, #0xe0000000 - orr \rx, \rx, #0x00010000 - orr \rx, \rx, #0x00000fe0 + .macro addruart, rp, rv + mov \rp, #0x00010000 + orr \rp, \rp, #0x00000fe0 + orr \rv, \rp, #0xe0000000 @ virtual + orr \rp, \rp, #0x03000000 @ physical .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S index 0eef78b4a6e..5882deaa56b 100644 --- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S @@ -19,13 +19,12 @@ #define S3C2410_UART1_OFF (0x4000) #define SHIFT_2440TXF (14-9) - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C24XX_PA_UART - ldrne \rx, = S3C24XX_VA_UART + .macro addruart, rp, rv + ldr \rp, = S3C24XX_PA_UART + ldr \rv, = S3C24XX_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) + add \rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) #endif .endm diff --git a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S index 239476b81f3..0c5a7380556 100644 --- a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S @@ -10,13 +10,12 @@ #include <mach/map.h> #include <plat/regs-serial.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C24XX_PA_UART - ldrne \rx, = S3C24XX_VA_UART + .macro addruart, rp, rv + ldr \rp, = S3C24XX_PA_UART + ldr \rv, = S3C24XX_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) + add \rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) #endif .endm diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S index f9ab5d26052..a29e70550c7 100644 --- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S @@ -21,13 +21,12 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rx, rtmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C_PA_UART - ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) + .macro addruart, rp, rv + ldr \rp, = S3C_PA_UART + ldr \rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) #if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) #endif .endm diff --git a/arch/arm/mach-s5p6442/include/mach/debug-macro.S b/arch/arm/mach-s5p6442/include/mach/debug-macro.S index bb6536147ff..e2213205d78 100644 --- a/arch/arm/mach-s5p6442/include/mach/debug-macro.S +++ b/arch/arm/mach-s5p6442/include/mach/debug-macro.S @@ -15,13 +15,12 @@ #include <mach/map.h> #include <plat/regs-serial.h> - .macro addruart, rx, rtmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C_PA_UART - ldrne \rx, = S3C_VA_UART + .macro addruart, rp, rv + ldr \rp, = S3C_PA_UART + ldr \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) #endif .endm diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S index 70e02e91ee3..b2ba95ddf8e 100644 --- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S @@ -22,13 +22,12 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rx, rtmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C_PA_UART - ldrne \rx, = S3C_VA_UART + .macro addruart, rp, rv + ldr \rp, = S3C_PA_UART + ldr \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) #endif .endm diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S index 7872f5c3dfc..169fe654a59 100644 --- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S @@ -21,13 +21,12 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C_PA_UART - ldrne \rx, = S3C_VA_UART + .macro addruart, rp, rv + ldr \rp, = S3C_PA_UART + ldr \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) #endif .endm diff --git a/arch/arm/mach-s5pv310/include/mach/debug-macro.S b/arch/arm/mach-s5pv310/include/mach/debug-macro.S index 6fb3893486b..b0d920c474d 100644 --- a/arch/arm/mach-s5pv310/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pv310/include/mach/debug-macro.S @@ -20,13 +20,12 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C_PA_UART - ldrne \rx, = S3C_VA_UART + .macro addruart, rp, rv + ldreq \rp, = S3C_PA_UART + ldrne \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(0x10000 * CONFIG_DEBUG_S3C_UART) + add \rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART) #endif .endm diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S index 336adccea54..0cd0fc9635b 100644 --- a/arch/arm/mach-sa1100/include/mach/debug-macro.S +++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S @@ -12,33 +12,37 @@ */ #include <mach/hardware.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x80000000 @ physical base address - movne \rx, #0xf8000000 @ virtual address + .macro addruart, rp, rv + mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? + moveq \rp, #0x80000000 @ physical base address + movne \rp, #0xf8000000 @ virtual address @ We probe for the active serial port here, coherently with @ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h. @ We assume r1 can be clobbered. @ see if Ser3 is active - add \rx, \rx, #0x00050000 - ldr r1, [\rx, #UTCR3] - tst r1, #UTCR3_TXE + add \rp, \rp, #0x00050000 + ldr \rv, [\rp, #UTCR3] + tst \rv, #UTCR3_TXE @ if Ser3 is inactive, then try Ser1 - addeq \rx, \rx, #(0x00010000 - 0x00050000) - ldreq r1, [\rx, #UTCR3] - tsteq r1, #UTCR3_TXE + addeq \rp, \rp, #(0x00010000 - 0x00050000) + ldreq \rv, [\rp, #UTCR3] + tsteq \rv, #UTCR3_TXE @ if Ser1 is inactive, then try Ser2 - addeq \rx, \rx, #(0x00030000 - 0x00010000) - ldreq r1, [\rx, #UTCR3] - tsteq r1, #UTCR3_TXE + addeq \rp, \rp, #(0x00030000 - 0x00010000) + ldreq \rv, [\rp, #UTCR3] + tsteq \rv, #UTCR3_TXE + + @ clear top bits, and generate both phys and virt addresses + lsl \rp, \rp, #8 + lsr \rp, \rp, #8 + orr \rv, \rp, #0xf8000000 @ virtual + orr \rp, \rp, #0x80000000 @ physical - @ if all ports are inactive, then there is nothing we can do - moveq pc, lr .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S index 5ea24d4d1ba..a473f55dc71 100644 --- a/arch/arm/mach-shark/include/mach/debug-macro.S +++ b/arch/arm/mach-shark/include/mach/debug-macro.S @@ -11,9 +11,10 @@ * */ - .macro addruart, rx, tmp - mov \rx, #0xe0000000 - orr \rx, \rx, #0x000003f8 + .macro addruart, rp, rv + mov \rp, #0xe0000000 + orr \rp, \rp, #0x000003f8 + mov \rv, \rp .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S index 55a39564b43..8ea3bffb4e0 100644 --- a/arch/arm/mach-tegra/include/mach/debug-macro.S +++ b/arch/arm/mach-tegra/include/mach/debug-macro.S @@ -20,24 +20,28 @@ #include <mach/io.h> - .macro addruart,rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =IO_APB_PHYS @ physical - ldrne \rx, =IO_APB_VIRT @ virtual + .macro addruart, rp, rv + ldreq \rp, =IO_APB_PHYS @ physical + ldrne \rv, =IO_APB_VIRT @ virtual #if defined(CONFIG_TEGRA_DEBUG_UART_NONE) #error "A debug UART must be selected in the kernel config to use DEBUG_LL" #elif defined(CONFIG_TEGRA_DEBUG_UARTA) - orr \rx, \rx, #0x6000 + orr \rp, \rp, #0x6000 + orr \rv, \rv, #0x6000 #elif defined(CONFIG_TEGRA_DEBUG_UARTB) - ldr \tmp, =0x6040 - orr \rx, \rx, \tmp + orr \rp, \rp, #0x6000 + orr \rp, \rp, #0x40 + orr \rv, \rv, #0x6000 + orr \rv, \rv, #0x40 #elif defined(CONFIG_TEGRA_DEBUG_UARTC) - orr \rx, \rx, #0x6200 + orr \rp, \rp, #0x6200 + orr \rv, \rv, #0x6200 #elif defined(CONFIG_TEGRA_DEBUG_UARTD) - orr \rx, \rx, #0x6300 + orr \rp, \rp, #0x6300 + orr \rv, \rv, #0x6300 #elif defined(CONFIG_TEGRA_DEBUG_UARTE) - orr \rx, \rx, #0x6400 + orr \rp, \rp, #0x6400 + orr \rv, \rv, #0x6400 #endif .endm diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S index 92c12420256..df715707bea 100644 --- a/arch/arm/mach-u300/include/mach/debug-macro.S +++ b/arch/arm/mach-u300/include/mach/debug-macro.S @@ -10,13 +10,12 @@ */ #include <mach/hardware.h> - .macro addruart, rx, tmp + .macro addruart, rp, rv /* If we move the address using MMU, use this. */ - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address - ldrne \rx, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address - orr \rx, \rx, #0x00003000 + ldr \rp, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address + ldr \rv, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address + orr \rp, \rp, #0x00003000 + orr \rv, \rv, #0x00003000 .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S index c5203b7ea55..be7c0f14e31 100644 --- a/arch/arm/mach-ux500/include/mach/debug-macro.S +++ b/arch/arm/mach-ux500/include/mach/debug-macro.S @@ -18,11 +18,9 @@ #define UX500_UART(n) __UX500_UART(n) #define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART) - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =UART_BASE @ no, physical address - ldrne \rx, =IO_ADDRESS(UART_BASE) @ yes, virtual address + .macro addruart, rp, rv + ldr \rp, =UART_BASE @ no, physical address + ldr \rv, =IO_ADDRESS(UART_BASE) @ yes, virtual address .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S index 6fea7199c62..eb2cf7dc5c4 100644 --- a/arch/arm/mach-versatile/include/mach/debug-macro.S +++ b/arch/arm/mach-versatile/include/mach/debug-macro.S @@ -11,13 +11,11 @@ * */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x10000000 - movne \rx, #0xf1000000 @ virtual base - orr \rx, \rx, #0x001F0000 - orr \rx, \rx, #0x00001000 + .macro addruart, rp, rv + mov \rp, #0x001F0000 + orr \rp, \rp, #0x00001000 + orr \rv, \rp, #0xf1000000 @ virtual base + orr \rp, \rp, #0x10000000 @ physical base .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S index 5167e2aceeb..050d65e02a4 100644 --- a/arch/arm/mach-vexpress/include/mach/debug-macro.S +++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S @@ -12,12 +12,10 @@ #define DEBUG_LL_UART_OFFSET 0x00009000 - .macro addruart,rx,tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x10000000 - movne \rx, #0xf8000000 @ virtual base - orr \rx, \rx, #DEBUG_LL_UART_OFFSET + .macro addruart,rp,rv + mov \rp, #DEBUG_LL_UART_OFFSET + orr \rv, \rp, #0xf8000000 @ virtual base + orr \rp, \rp, #0x10000000 @ physical base .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 25606409aab..d56213fb901 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -62,11 +62,9 @@ #define UART_PADDR MXC91231_UART2_BASE_ADDR #define UART_VADDR MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR) #endif - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =UART_PADDR @ physical - ldrne \rx, =UART_VADDR @ virtual + .macro addruart, rp, rv + ldr \rp, =UART_PADDR @ physical + ldr \rv, =UART_VADDR @ virtual .endm .macro senduart,rd,rx diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S index 37fa593884e..e91270e4f64 100644 --- a/arch/arm/plat-spear/include/plat/debug-macro.S +++ b/arch/arm/plat-spear/include/plat/debug-macro.S @@ -14,11 +14,9 @@ #include <linux/amba/serial.h> #include <mach/spear.h> - .macro addruart, rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #SPEAR_DBG_UART_BASE @ Physical base - movne \rx, #VA_SPEAR_DBG_UART_BASE @ Virtual base + .macro addruart, rp, rv + mov \rp, #SPEAR_DBG_UART_BASE @ Physical base + mov \rv, #VA_SPEAR_DBG_UART_BASE @ Virtual base .endm .macro senduart, rd, rx diff --git a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S index 1b9348bf0e4..d3a0985c968 100644 --- a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S +++ b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S @@ -16,13 +16,10 @@ * http://www.gnu.org/copyleft/gpl.html */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x80000000 @ physical base address - addeq \rx, \rx, #0x00070000 - movne \rx, #0xf0000000 @ virtual base - addne \rx, \rx, #0x00070000 + .macro addruart, rp, rv + mov \rp, #0x00070000 + add \rv, \rp, #0xf0000000 @ virtual base + add \rp, \rp, #0x80000000 @ physical base .endm .macro senduart,rd,rx diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S index 97537845df6..7662f736e42 100644 --- a/arch/arm/plat-tcc/include/mach/debug-macro.S +++ b/arch/arm/plat-tcc/include/mach/debug-macro.S @@ -9,12 +9,11 @@ * */ - .macro addruart,rx,tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x90000000 @ physical base address - movne \rx, #0xF1000000 @ virtual base - orr \rx, \rx, #0x00007000 @ UART0 + .macro addruart, rp, rv + moveq \rp, #0x90000000 @ physical base address + movne \rv, #0xF1000000 @ virtual base + orr \rp, \rp, #0x00007000 @ UART0 + orr \rv, \rv, #0x00007000 @ UART0 .endm .macro senduart,rd,rx |