summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-omap2/gpmc.c6
-rw-r--r--arch/arm/mach-omap2/id.c8
-rw-r--r--arch/arm/mach-omap2/io.c52
-rw-r--r--arch/arm/mach-omap2/serial.c7
-rw-r--r--arch/arm/mach-omap2/timer-gp.c9
-rw-r--r--arch/arm/plat-omap/common.c31
-rw-r--r--arch/arm/plat-omap/devices.c2
-rw-r--r--arch/arm/plat-omap/dma.c23
-rw-r--r--arch/arm/plat-omap/dmtimer.c59
-rw-r--r--arch/arm/plat-omap/gpio.c134
-rw-r--r--arch/arm/plat-omap/include/mach/clock.h8
-rw-r--r--arch/arm/plat-omap/include/mach/common.h1
-rw-r--r--arch/arm/plat-omap/include/mach/control.h7
-rw-r--r--arch/arm/plat-omap/include/mach/cpu.h21
-rw-r--r--arch/arm/plat-omap/include/mach/debug-macro.S2
-rw-r--r--arch/arm/plat-omap/include/mach/dma.h1
-rw-r--r--arch/arm/plat-omap/include/mach/entry-macro.S46
-rw-r--r--arch/arm/plat-omap/include/mach/hardware.h1
-rw-r--r--arch/arm/plat-omap/include/mach/io.h37
-rw-r--r--arch/arm/plat-omap/include/mach/irqs.h89
-rw-r--r--arch/arm/plat-omap/include/mach/memory.h3
-rw-r--r--arch/arm/plat-omap/include/mach/omap44xx.h46
-rw-r--r--arch/arm/plat-omap/include/mach/serial.h16
-rw-r--r--arch/arm/plat-omap/io.c29
-rw-r--r--arch/arm/plat-omap/mux.c3
-rw-r--r--arch/arm/plat-omap/sram.c21
26 files changed, 600 insertions, 62 deletions
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 2249049c1d5..f91934b2b09 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -5,6 +5,9 @@
*
* Author: Juha Yrjola
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -424,6 +427,9 @@ void __init gpmc_init(void)
} else if (cpu_is_omap34xx()) {
ck = "gpmc_fck";
l = OMAP34XX_GPMC_BASE;
+ } else if (cpu_is_omap44xx()) {
+ ck = "gpmc_fck";
+ l = OMAP44XX_GPMC_BASE;
}
gpmc_l3_clk = clk_get(NULL, ck);
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 34b5914e0f8..458990e20c6 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -6,6 +6,9 @@
* Copyright (C) 2005 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -200,7 +203,10 @@ void __init omap2_check_revision(void)
omap24xx_check_revision();
else if (cpu_is_omap34xx())
omap34xx_check_revision();
- else
+ else if (cpu_is_omap44xx()) {
+ printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n");
+ return;
+ } else
pr_err("OMAP revision unknown, please fix!\n");
/*
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 916fcd3a232..32afd944821 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -4,12 +4,14 @@
* OMAP2 I/O mapping code
*
* Copyright (C) 2005 Nokia Corporation
- * Copyright (C) 2007 Texas Instruments
+ * Copyright (C) 2007-2009 Texas Instruments
*
* Author:
* Juha Yrjola <juha.yrjola@nokia.com>
* Syed Khasim <x0khasim@ti.com>
*
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -30,6 +32,7 @@
#include <mach/sdrc.h>
#include <mach/gpmc.h>
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */
#include "clock.h"
#include <mach/powerdomain.h>
@@ -38,7 +41,7 @@
#include <mach/clockdomain.h>
#include "clockdomains.h"
-
+#endif
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
@@ -166,6 +169,46 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
},
};
#endif
+#ifdef CONFIG_ARCH_OMAP4
+static struct map_desc omap44xx_io_desc[] __initdata = {
+ {
+ .virtual = L3_44XX_VIRT,
+ .pfn = __phys_to_pfn(L3_44XX_PHYS),
+ .length = L3_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_44XX_VIRT,
+ .pfn = __phys_to_pfn(L4_44XX_PHYS),
+ .length = L4_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_WK_44XX_VIRT,
+ .pfn = __phys_to_pfn(L4_WK_44XX_PHYS),
+ .length = L4_WK_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = OMAP44XX_GPMC_VIRT,
+ .pfn = __phys_to_pfn(OMAP44XX_GPMC_PHYS),
+ .length = OMAP44XX_GPMC_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_PER_44XX_VIRT,
+ .pfn = __phys_to_pfn(L4_PER_44XX_PHYS),
+ .length = L4_PER_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_EMU_44XX_VIRT,
+ .pfn = __phys_to_pfn(L4_EMU_44XX_PHYS),
+ .length = L4_EMU_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+#endif
void __init omap2_map_common_io(void)
{
@@ -183,6 +226,9 @@ void __init omap2_map_common_io(void)
iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
#endif
+#if defined(CONFIG_ARCH_OMAP4)
+ iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+#endif
/* Normally devicemaps_init() would flush caches and tlb after
* mdesc->map_io(), but we must also do it here because of the CPU
* revision check below.
@@ -198,9 +244,11 @@ void __init omap2_map_common_io(void)
void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
{
omap2_mux_init();
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
pwrdm_init(powerdomains_omap);
clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
omap2_clk_init();
omap2_sdrc_init(sp);
+#endif
gpmc_init();
}
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 3c2d325d3dc..29dc6f52905 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -8,6 +8,9 @@
*
* Based off of arch/arm/mach-omap/omap1/serial.c
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com
+ *
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
@@ -122,6 +125,10 @@ void __init omap_serial_init(void)
if (info == NULL)
return;
+ if (cpu_is_omap44xx()) {
+ for (i = 0; i < OMAP_MAX_NR_PORTS; i++)
+ serial_platform_data[i].irq += 32;
+ }
for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
struct plat_serial8250_port *p = serial_platform_data + i;
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index f36aba12090..2ce474a9d2b 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -17,9 +17,10 @@
*
* Some parts based off of TI's 24xx code:
*
- * Copyright (C) 2004 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Texas Instruments, Inc.
*
* Roughly modelled after the OMAP1 MPU timer code.
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -82,7 +83,8 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
case CLOCK_EVT_MODE_PERIODIC:
period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
period -= 1;
-
+ if (cpu_is_omap44xx())
+ period = 0xff; /* FIXME: */
omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period);
break;
case CLOCK_EVT_MODE_ONESHOT:
@@ -145,6 +147,9 @@ static void __init omap2_gp_clockevent_init(void)
"timer-gp: omap_dm_timer_set_source() failed\n");
tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
+ if (cpu_is_omap44xx())
+ /* Assuming 32kHz clk is driving GPT1 */
+ tick_rate = 32768; /* FIXME: */
pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n",
gptimer_id, tick_rate);
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 70b68ef8320..66738c3854c 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -2,6 +2,10 @@
* linux/arch/arm/plat-omap/common.c
*
* Code common to all OMAP machines.
+ * The file is created by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -217,6 +221,15 @@ static cycle_t omap34xx_32k_read(struct clocksource *cs)
#define omap34xx_32k_read NULL
#endif
+#ifdef CONFIG_ARCH_OMAP4
+static cycle_t omap44xx_32k_read(struct clocksource *cs)
+{
+ return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap44xx_32k_read NULL
+#endif
+
/*
* Kernel assumes that sched_clock can be called early but may not have
* things ready yet.
@@ -264,6 +277,8 @@ static int __init omap_init_clocksource_32k(void)
clocksource_32k.read = omap2430_32k_read;
else if (cpu_is_omap34xx())
clocksource_32k.read = omap34xx_32k_read;
+ else if (cpu_is_omap44xx())
+ clocksource_32k.read = omap44xx_32k_read;
else
return -ENODEV;
@@ -351,3 +366,19 @@ void __init omap2_set_globals_343x(void)
}
#endif
+#if defined(CONFIG_ARCH_OMAP4)
+static struct omap_globals omap4_globals = {
+ .class = OMAP443X_CLASS,
+ .tap = OMAP2_IO_ADDRESS(0x4830a000),
+ .ctrl = OMAP2_IO_ADDRESS(OMAP443X_CTRL_BASE),
+ .prm = OMAP2_IO_ADDRESS(OMAP4430_PRM_BASE),
+ .cm = OMAP2_IO_ADDRESS(OMAP4430_CM_BASE),
+};
+
+void __init omap2_set_globals_443x(void)
+{
+ omap2_set_globals_tap(&omap4_globals);
+ omap2_set_globals_control(&omap4_globals);
+}
+#endif
+
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 87fb7ff4179..a64b692a1bf 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -311,6 +311,8 @@ static void omap_init_wdt(void)
wdt_resources[0].start = 0x49016000; /* WDT2 */
else if (cpu_is_omap343x())
wdt_resources[0].start = 0x48314000; /* WDT2 */
+ else if (cpu_is_omap44xx())
+ wdt_resources[0].start = 0x4a314000;
else
return;
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 06e9cbe8b8e..def14ec265b 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -10,6 +10,9 @@
* Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
* Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* Support functions for the OMAP internal DMA channels.
*
* This program is free software; you can redistribute it and/or modify
@@ -872,7 +875,7 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio,
}
l = dma_read(CCR(lch));
l &= ~((1 << 6) | (1 << 26));
- if (cpu_is_omap2430() || cpu_is_omap34xx())
+ if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
else
l |= ((read_prio & 0x1) << 6);
@@ -1844,7 +1847,8 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
#define omap1_dma_irq_handler NULL
#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
static int omap2_dma_handle_ch(int ch)
{
@@ -2339,6 +2343,9 @@ static int __init omap_init_dma(void)
} else if (cpu_is_omap34xx()) {
omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+ } else if (cpu_is_omap44xx()) {
+ omap_dma_base = IO_ADDRESS(OMAP44XX_DMA4_BASE);
+ dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
} else {
pr_err("DMA init failed for unsupported omap\n");
return -ENODEV;
@@ -2437,12 +2444,18 @@ static int __init omap_init_dma(void)
}
}
- if (cpu_is_omap2430() || cpu_is_omap34xx())
+ if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
DMA_DEFAULT_FIFO_DEPTH, 0);
- if (cpu_class_is_omap2())
- setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq);
+ if (cpu_class_is_omap2()) {
+ int irq;
+ if (cpu_is_omap44xx())
+ irq = INT_44XX_SDMA_IRQ0;
+ else
+ irq = INT_24XX_SDMA_IRQ0;
+ setup_irq(irq, &omap24xx_dma_irq);
+ }
/* FIXME: Update LCD DMA to work on 24xx */
if (cpu_class_is_omap1()) {
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index ee206122f50..7f50b6103de 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -7,6 +7,9 @@
* OMAP2 support by Juha Yrjola
* API improvements and OMAP2 clock framework support by Timo Teras
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -150,7 +153,8 @@
struct omap_dm_timer {
unsigned long phys_base;
int irq;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
struct clk *iclk, *fclk;
#endif
void __iomem *io_base;
@@ -169,6 +173,9 @@ struct omap_dm_timer {
#define omap3_dm_timers NULL
#define omap3_dm_source_names NULL
#define omap3_dm_source_clocks NULL
+#define omap4_dm_timers NULL
+#define omap4_dm_source_names NULL
+#define omap4_dm_source_clocks NULL
static struct omap_dm_timer omap1_dm_timers[] = {
{ .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
@@ -191,6 +198,9 @@ static const int dm_timer_count = ARRAY_SIZE(omap1_dm_timers);
#define omap3_dm_timers NULL
#define omap3_dm_source_names NULL
#define omap3_dm_source_clocks NULL
+#define omap4_dm_timers NULL
+#define omap4_dm_source_names NULL
+#define omap4_dm_source_clocks NULL
static struct omap_dm_timer omap2_dm_timers[] = {
{ .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
@@ -225,6 +235,9 @@ static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
#define omap2_dm_timers NULL
#define omap2_dm_source_names NULL
#define omap2_dm_source_clocks NULL
+#define omap4_dm_timers NULL
+#define omap4_dm_source_names NULL
+#define omap4_dm_source_clocks NULL
static struct omap_dm_timer omap3_dm_timers[] = {
{ .phys_base = 0x48318000, .irq = INT_24XX_GPTIMER1 },
@@ -250,6 +263,40 @@ static const char *omap3_dm_source_names[] __initdata = {
static struct clk *omap3_dm_source_clocks[2];
static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
+#elif defined(CONFIG_ARCH_OMAP4)
+
+#define omap_dm_clk_enable(x) clk_enable(x)
+#define omap_dm_clk_disable(x) clk_disable(x)
+#define omap1_dm_timers NULL
+#define omap2_dm_timers NULL
+#define omap2_dm_source_names NULL
+#define omap2_dm_source_clocks NULL
+#define omap3_dm_timers NULL
+#define omap3_dm_source_names NULL
+#define omap3_dm_source_clocks NULL
+
+static struct omap_dm_timer omap4_dm_timers[] = {
+ { .phys_base = 0x4a318000, .irq = INT_44XX_GPTIMER1 },
+ { .phys_base = 0x48032000, .irq = INT_44XX_GPTIMER2 },
+ { .phys_base = 0x48034000, .irq = INT_44XX_GPTIMER3 },
+ { .phys_base = 0x48036000, .irq = INT_44XX_GPTIMER4 },
+ { .phys_base = 0x40138000, .irq = INT_44XX_GPTIMER5 },
+ { .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER6 },
+ { .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER7 },
+ { .phys_base = 0x4013e000, .irq = INT_44XX_GPTIMER8 },
+ { .phys_base = 0x4803e000, .irq = INT_44XX_GPTIMER9 },
+ { .phys_base = 0x48086000, .irq = INT_44XX_GPTIMER10 },
+ { .phys_base = 0x48088000, .irq = INT_44XX_GPTIMER11 },
+ { .phys_base = 0x4a320000, .irq = INT_44XX_GPTIMER12 },
+};
+static const char *omap4_dm_source_names[] __initdata = {
+ "sys_ck",
+ "omap_32k_fck",
+ NULL
+};
+static struct clk *omap4_dm_source_clocks[2];
+static const int dm_timer_count = ARRAY_SIZE(omap4_dm_timers);
+
#else
#error OMAP architecture not supported!
@@ -459,7 +506,8 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
}
EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
-#elif defined(CONFIG_ARCH_OMAP2) || defined (CONFIG_ARCH_OMAP3)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
{
@@ -711,6 +759,10 @@ int __init omap_dm_timer_init(void)
dm_timers = omap3_dm_timers;
dm_source_names = omap3_dm_source_names;
dm_source_clocks = omap3_dm_source_clocks;
+ } else if (cpu_is_omap44xx()) {
+ dm_timers = omap4_dm_timers;
+ dm_source_names = omap4_dm_source_names;
+ dm_source_clocks = omap4_dm_source_clocks;
}
if (cpu_class_is_omap2())
@@ -723,7 +775,8 @@ int __init omap_dm_timer_init(void)
for (i = 0; i < dm_timer_count; i++) {
timer = &dm_timers[i];
timer->io_base = IO_ADDRESS(timer->phys_base);
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
if (cpu_class_is_omap2()) {
char clk_name[16];
sprintf(clk_name, "gpt%d_ick", i + 1);
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index ee0b21f5b09..7fd89ba8d3b 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -6,6 +6,9 @@
* Copyright (C) 2003-2005 Nokia Corporation
* Written by Juha Yrjölä <juha.yrjola@nokia.com>
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -146,6 +149,16 @@
#define OMAP34XX_GPIO5_BASE IO_ADDRESS(0x49056000)
#define OMAP34XX_GPIO6_BASE IO_ADDRESS(0x49058000)
+/*
+ * OMAP44XX specific GPIO registers
+ */
+#define OMAP44XX_GPIO1_BASE IO_ADDRESS(0x4a310000)
+#define OMAP44XX_GPIO2_BASE IO_ADDRESS(0x48055000)
+#define OMAP44XX_GPIO3_BASE IO_ADDRESS(0x48057000)
+#define OMAP44XX_GPIO4_BASE IO_ADDRESS(0x48059000)
+#define OMAP44XX_GPIO5_BASE IO_ADDRESS(0x4805B000)
+#define OMAP44XX_GPIO6_BASE IO_ADDRESS(0x4805D000)
+
#define OMAP_MPUIO_VBASE IO_ADDRESS(OMAP_MPUIO_BASE)
struct gpio_bank {
@@ -153,11 +166,13 @@ struct gpio_bank {
u16 irq;
u16 virtual_irq_start;
int method;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+ defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
u32 suspend_wakeup;
u32 saved_wakeup;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
u32 non_wakeup_gpios;
u32 enabled_non_wakeup_gpios;
@@ -251,6 +266,24 @@ static struct gpio_bank gpio_bank_34xx[6] = {
#endif
+#ifdef CONFIG_ARCH_OMAP4
+static struct gpio_bank gpio_bank_44xx[6] = {
+ { OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \
+ METHOD_GPIO_24XX },
+};
+
+#endif
+
static struct gpio_bank *gpio_bank;
static int gpio_bank_count;
@@ -273,7 +306,7 @@ static inline struct gpio_bank *get_gpio_bank(int gpio)
}
if (cpu_is_omap24xx())
return &gpio_bank[gpio >> 5];
- if (cpu_is_omap34xx())
+ if (cpu_is_omap34xx() || cpu_is_omap44xx())
return &gpio_bank[gpio >> 5];
BUG();
return NULL;
@@ -285,7 +318,7 @@ static inline int get_gpio_index(int gpio)
return gpio & 0x1f;
if (cpu_is_omap24xx())
return gpio & 0x1f;
- if (cpu_is_omap34xx())
+ if (cpu_is_omap34xx() || cpu_is_omap44xx())
return gpio & 0x1f;
return gpio & 0x0f;
}
@@ -307,7 +340,7 @@ static inline int gpio_valid(int gpio)
return 0;
if (cpu_is_omap24xx() && gpio < 128)
return 0;
- if (cpu_is_omap34xx() && gpio < 192)
+ if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192)
return 0;
return -1;
}
@@ -353,7 +386,8 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
reg += OMAP850_GPIO_DIR_CONTROL;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_OE;
break;
@@ -425,7 +459,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
l &= ~(1 << gpio);
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -476,7 +511,8 @@ static int __omap_get_gpio_datain(int gpio)
reg += OMAP850_GPIO_DATA_INPUT;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_DATAIN;
break;
@@ -520,7 +556,7 @@ void omap_set_gpio_debounce(int gpio, int enable)
else
goto done;
- if (cpu_is_omap34xx()) {
+ if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
if (enable)
clk_enable(bank->dbck);
else
@@ -550,7 +586,8 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
}
EXPORT_SYMBOL(omap_set_gpio_debounce_time);
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
int trigger)
{
@@ -660,7 +697,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
goto bad;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
set_24xx_gpio_triggering(bank, gpio, trigger);
break;
@@ -745,7 +783,8 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
reg += OMAP850_GPIO_INT_STATUS;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQSTATUS1;
break;
@@ -814,7 +853,8 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
inv = 1;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQENABLE1;
mask = 0xffffffff;
@@ -887,7 +927,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
l |= gpio_mask;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -932,7 +973,8 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
if (bank->non_wakeup_gpios & (1 << gpio)) {
printk(KERN_ERR "Unable to modify wakeup on "
@@ -1017,7 +1059,8 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
__raw_writel(1 << offset, reg);
}
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
if (bank->method == METHOD_GPIO_24XX) {
/* Disable wake-up during idle for dynamic tick */
void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
@@ -1069,7 +1112,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
if (bank->method == METHOD_GPIO_850)
isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
if (bank->method == METHOD_GPIO_24XX)
isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
#endif
@@ -1346,7 +1390,7 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
/*---------------------------------------------------------------------*/
static int initialized;
-#if !defined(CONFIG_ARCH_OMAP3)
+#if !(defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4))
static struct clk * gpio_ick;
#endif
@@ -1359,7 +1403,7 @@ static struct clk * gpio5_ick;
static struct clk * gpio5_fck;
#endif
-#if defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
#endif
@@ -1419,8 +1463,8 @@ static int __init _omap_gpio_init(void)
}
#endif
-#if defined(CONFIG_ARCH_OMAP3)
- if (cpu_is_omap34xx()) {
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+ if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
for (i = 0; i < OMAP34XX_NR_GPIOS; i++) {
sprintf(clk_name, "gpio%d_ick", i + 1);
gpio_iclks[i] = clk_get(NULL, clk_name);
@@ -1497,6 +1541,17 @@ static int __init _omap_gpio_init(void)
(rev >> 4) & 0x0f, rev & 0x0f);
}
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ if (cpu_is_omap44xx()) {
+ int rev;
+
+ gpio_bank_count = OMAP34XX_NR_GPIOS;
+ gpio_bank = gpio_bank_44xx;
+ rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+ printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
+ (rev >> 4) & 0x0f, rev & 0x0f);
+ }
+#endif
for (i = 0; i < gpio_bank_count; i++) {
int j, gpio_count = 16;
@@ -1520,7 +1575,8 @@ static int __init _omap_gpio_init(void)
gpio_count = 32; /* 730 has 32-bit GPIOs */
}
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
if (bank->method == METHOD_GPIO_24XX) {
static const u32 non_wakeup_gpios[] = {
0xe203ffc0, 0x08700040
@@ -1577,7 +1633,7 @@ static int __init _omap_gpio_init(void)
set_irq_chained_handler(bank->irq, gpio_irq_handler);
set_irq_data(bank->irq, bank);
- if (cpu_is_omap34xx()) {
+ if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
sprintf(clk_name, "gpio%d_dbck", i + 1);
bank->dbck = clk_get(NULL, clk_name);
if (IS_ERR(bank->dbck))
@@ -1599,7 +1655,8 @@ static int __init _omap_gpio_init(void)
return 0;
}
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+ defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
{
int i;
@@ -1622,7 +1679,8 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
@@ -1663,7 +1721,8 @@ static int omap_gpio_resume(struct sys_device *dev)
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
@@ -1695,7 +1754,8 @@ static struct sys_device omap_gpio_device = {
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
static int workaround_enabled;
@@ -1711,7 +1771,8 @@ void omap2_gpio_prepare_for_retention(void)
if (!(bank->enabled_non_wakeup_gpios))
continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
@@ -1720,7 +1781,8 @@ void omap2_gpio_prepare_for_retention(void)
bank->saved_risingdetect = l2;
l1 &= ~bank->enabled_non_wakeup_gpios;
l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
__raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
__raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
#endif
@@ -1745,7 +1807,8 @@ void omap2_gpio_resume_after_retention(void)
if (!(bank->enabled_non_wakeup_gpios))
continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
__raw_writel(bank->saved_fallingdetect,
bank->base + OMAP24XX_GPIO_FALLINGDETECT);
__raw_writel(bank->saved_risingdetect,
@@ -1755,14 +1818,16 @@ void omap2_gpio_resume_after_retention(void)
* state. If so, generate an IRQ by software. This is
* horribly racy, but it's the best we can do to work around
* this silicon bug. */
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
#endif
l ^= bank->saved_datain;
l &= bank->non_wakeup_gpios;
if (l) {
u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
__raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
@@ -1798,7 +1863,8 @@ static int __init omap_gpio_sysinit(void)
mpuio_init();
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+ defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
if (ret == 0) {
ret = sysdev_class_register(&omap_gpio_sysclass);
@@ -1887,7 +1953,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
irqstat = irq_desc[irq].status;
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
- defined(CONFIG_ARCH_OMAP34XX)
+ defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
if (is_in && ((bank->suspend_wakeup & mask)
|| irqstat & IRQ_TYPE_SENSE_MASK)) {
char *trigger = NULL;
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 073a2c5569f..c20e02ec303 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -22,7 +22,8 @@ struct clkops {
void (*disable)(struct clk *);
};
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
struct clksel_rate {
u32 val;
@@ -51,7 +52,7 @@ struct dpll_data {
u8 max_divider;
u32 max_tolerance;
u16 max_multiplier;
-# if defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
u8 modes;
void __iomem *autoidle_reg;
void __iomem *idlest_reg;
@@ -83,7 +84,8 @@ struct clk {
void (*init)(struct clk *);
__u8 enable_bit;
__s8 usecount;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
u8 fixed_div;
void __iomem *clksel_reg;
u32 clksel_mask;
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
index 0ecf36deb17..4b188334c66 100644
--- a/arch/arm/plat-omap/include/mach/common.h
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -62,6 +62,7 @@ struct omap_globals {
void omap2_set_globals_242x(void);
void omap2_set_globals_243x(void);
void omap2_set_globals_343x(void);
+void omap2_set_globals_443x(void);
/* These get called from omap2_set_globals_xxxx(), do not call these */
void omap2_set_globals_tap(struct omap_globals *);
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index 269147f3836..f45ec621da9 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -1,9 +1,9 @@
/*
* arch/arm/plat-omap/include/mach/control.h
*
- * OMAP2/3 System Control Module definitions
+ * OMAP2/3/4 System Control Module definitions
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
* Copyright (C) 2007-2008 Nokia Corporation
*
* Written by Paul Walmsley
@@ -190,7 +190,8 @@
#define OMAP2_PBIASLITEVMODE0 (1 << 0)
#ifndef __ASSEMBLY__
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
extern void __iomem *omap_ctrl_base_get(void);
extern u8 omap_ctrl_readb(u16 offset);
extern u16 omap_ctrl_readw(u16 offset);
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 98b14425236..fc60c4ebcc2 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -5,8 +5,12 @@
*
* Copyright (C) 2004, 2008 Nokia Corporation
*
+ * Copyright (C) 2009 Texas Instruments.
+ *
* Written by Tony Lindgren <tony.lindgren@nokia.com>
*
+ * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -155,6 +159,8 @@ IS_OMAP_SUBCLASS(343x, 0x343)
#define cpu_is_omap243x() 0
#define cpu_is_omap34xx() 0
#define cpu_is_omap343x() 0
+#define cpu_is_omap44xx() 0
+#define cpu_is_omap443x() 0
#if defined(MULTI_OMAP1)
# if defined(CONFIG_ARCH_OMAP730)
@@ -348,12 +354,21 @@ IS_OMAP_TYPE(3430, 0x3430)
# define cpu_is_omap3430() is_omap3430()
#endif
+# if defined(CONFIG_ARCH_OMAP4)
+# undef cpu_is_omap44xx
+# undef cpu_is_omap443x
+# define cpu_is_omap44xx() 1
+# define cpu_is_omap443x() 1
+# endif
+
/* Macros to detect if we have OMAP1 or OMAP2 */
#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \
cpu_is_omap16xx())
-#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx())
+#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \
+ cpu_is_omap44xx())
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
/* Various silicon revisions for omap2 */
#define OMAP242X_CLASS 0x24200024
@@ -370,6 +385,8 @@ IS_OMAP_TYPE(3430, 0x3430)
#define OMAP3430_REV_ES3_0 0x34303034
#define OMAP3430_REV_ES3_1 0x34304034
+#define OMAP443X_CLASS 0x44300034
+
/*
* omap_chip bits
*
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
index 1b11f5c6a2d..ac24050e341 100644
--- a/arch/arm/plat-omap/include/mach/debug-macro.S
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
@@ -36,7 +36,7 @@
add \rx, \rx, #0x00004000 @ UART 3
#endif
-#elif CONFIG_ARCH_OMAP3
+#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
moveq \rx, #0x48000000 @ physical base address
movne \rx, #0xd8000000 @ virtual base
orr \rx, \rx, #0x0006a000
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 19df76f97ab..8c1eae88737 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -48,6 +48,7 @@
/* Hardware registers for omap2 and omap3 */
#define OMAP24XX_DMA4_BASE (L4_24XX_BASE + 0x56000)
#define OMAP34XX_DMA4_BASE (L4_34XX_BASE + 0x56000)
+#define OMAP44XX_DMA4_BASE (L4_44XX_BASE + 0x56000)
#define OMAP_DMA4_REVISION 0x00
#define OMAP_DMA4_GCR 0x78
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
index 33256a0e9a2..00f45c01390 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -3,6 +3,9 @@
*
* Low-level IRQ helper macros for OMAP-based platforms
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
@@ -10,6 +13,7 @@
#include <mach/hardware.h>
#include <mach/io.h>
#include <mach/irqs.h>
+#include <asm/hardware/gic.h>
#if defined(CONFIG_ARCH_OMAP1)
@@ -56,7 +60,8 @@
.endm
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
#include <mach/omap24xx.h>
#include <mach/omap34xx.h>
@@ -67,7 +72,9 @@
#elif defined(CONFIG_ARCH_OMAP34XX)
#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE)
#endif
-
+#if defined(CONFIG_ARCH_OMAP4)
+#include <mach/omap44xx.h>
+#endif
#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt offset */
#define ACTIVEIRQ_MASK 0x7f /* Active interrupt bits */
@@ -80,6 +87,7 @@
.macro arch_ret_to_user, tmp1, tmp2
.endm
+#ifndef CONFIG_ARCH_OMAP4
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =OMAP2_VA_IC_BASE
ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
@@ -95,6 +103,40 @@
and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
.endm
+#else
+ /*
+ * The interrupt numbering scheme is defined in the
+ * interrupt controller spec. To wit:
+ *
+ * Interrupts 0-15 are IPI
+ * 16-28 are reserved
+ * 29-31 are local. We allow 30 to be used for the watchdog.
+ * 32-1020 are global
+ * 1021-1022 are reserved
+ * 1023 is "spurious" (no interrupt)
+ *
+ * For now, we ignore all local interrupts so only return an
+ * interrupt if it's between 30 and 1020. The test_for_ipi
+ * routine below will pick up on IPIs.
+ * A simple read from the controller will tell us the number
+ * of the highest priority enabled interrupt.
+ * We then just need to check whether it is in the
+ * valid range for an IRQ (30-1020 inclusive).
+ */
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \base, =OMAP44XX_VA_GIC_CPU_BASE
+ ldr \irqstat, [\base, #GIC_CPU_INTACK]
+
+ ldr \tmp, =1021
+
+ bic \irqnr, \irqstat, #0x1c00
+
+ cmp \irqnr, #29
+ cmpcc \irqnr, \irqnr
+ cmpne \irqnr, \tmp
+ cmpcs \irqnr, \irqnr
+ .endm
+#endif
.macro irq_prio_table
.endm
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 3dc423ed3e8..26c1fbff08a 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -285,5 +285,6 @@
#include "omap16xx.h"
#include "omap24xx.h"
#include "omap34xx.h"
+#include "omap44xx.h"
#endif /* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 0610d7e2b3d..3b281472056 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -6,6 +6,9 @@
* Copied from arch/arm/mach-sa1100/include/mach/io.h
* Copyright (C) 1997-1999 Russell King
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -157,6 +160,40 @@
#define DSP_MMU_34XX_VIRT 0xe2000000
#define DSP_MMU_34XX_SIZE SZ_4K
+
+#elif defined(CONFIG_ARCH_OMAP4)
+/* We map both L3 and L4 on OMAP4 */
+#define L3_44XX_PHYS L3_44XX_BASE
+#define L3_44XX_VIRT 0xd4000000
+#define L3_44XX_SIZE SZ_1M
+
+#define L4_44XX_PHYS L4_44XX_BASE
+#define L4_44XX_VIRT 0xda000000
+#define L4_44XX_SIZE SZ_4M
+
+
+#define L4_WK_44XX_PHYS L4_WK_44XX_BASE
+#define L4_WK_44XX_VIRT 0xda300000
+#define L4_WK_44XX_SIZE SZ_1M
+
+#define L4_PER_44XX_PHYS L4_PER_44XX_BASE
+#define L4_PER_44XX_VIRT 0xd8000000
+#define L4_PER_44XX_SIZE SZ_4M
+
+#define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE
+#define L4_EMU_44XX_VIRT 0xe4000000
+#define L4_EMU_44XX_SIZE SZ_64M
+
+#define OMAP44XX_GPMC_PHYS OMAP44XX_GPMC_BASE
+#define OMAP44XX_GPMC_VIRT 0xe0000000
+#define OMAP44XX_GPMC_SIZE SZ_1M
+
+
+#define IO_OFFSET 0x90000000
+#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */
+
#endif
#define IO_ADDRESS(pa) IOMEM(__IO_ADDRESS(pa))
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index 7f57ee66f36..5bc331e93cf 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -4,6 +4,9 @@
* Copyright (C) Greg Lonnon 2001
* Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -422,6 +425,92 @@
#define INT_34XX_BENCH_MPU_EMUL 3
+
+#define IRQ_GIC_START 32
+
+#define INT_44XX_BENCH_MPU_EMUL (3 + IRQ_GIC_START)
+#define INT_44XX_SSM_ABORT_IRQ (6 + IRQ_GIC_START)
+#define INT_44XX_SYS_NIRQ (7 + IRQ_GIC_START)
+#define INT_44XX_D2D_FW_IRQ (8 + IRQ_GIC_START)
+#define INT_44XX_PRCM_MPU_IRQ (11 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ0 (12 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ1 (13 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ2 (14 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ3 (15 + IRQ_GIC_START)
+#define INT_44XX_ISS_IRQ (24 + IRQ_GIC_START)
+#define INT_44XX_DSS_IRQ (25 + IRQ_GIC_START)
+#define INT_44XX_MAIL_U0_MPU (26 + IRQ_GIC_START)
+#define INT_44XX_DSP_MMU (28 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER1 (37 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER2 (38 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER3 (39 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER4 (40 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER5 (41 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER6 (42 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER7 (43 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER8 (44 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER9 (45 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER10 (46 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER11 (47 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER12 (95 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD5 (51 + IRQ_GIC_START)
+#define INT_44XX_I2C1_IRQ (56 + IRQ_GIC_START)
+#define INT_44XX_I2C2_IRQ (57 + IRQ_GIC_START)
+#define INT_44XX_HDQ_IRQ (58 + IRQ_GIC_START)
+#define INT_44XX_SPI1_IRQ (65 + IRQ_GIC_START)
+#define INT_44XX_SPI2_IRQ (66 + IRQ_GIC_START)
+#define INT_44XX_HSI_1_IRQ0 (67 + IRQ_GIC_START)
+#define INT_44XX_HSI_2_IRQ1 (68 + IRQ_GIC_START)
+#define INT_44XX_HSI_1_DMAIRQ (71 + IRQ_GIC_START)
+#define INT_44XX_UART1_IRQ (72 + IRQ_GIC_START)
+#define INT_44XX_UART2_IRQ (73 + IRQ_GIC_START)
+#define INT_44XX_UART3_IRQ (74 + IRQ_GIC_START)
+#define INT_44XX_UART4_IRQ (70 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_NISO (76 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_ISO (77 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_HGEN (78 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_HSOF (79 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_OTG (80 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ_TX (81 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ_RX (82 + IRQ_GIC_START)
+#define INT_44XX_MMC_IRQ (83 + IRQ_GIC_START)
+#define INT_44XX_MMC2_IRQ (86 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ_TX (89 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ_RX (90 + IRQ_GIC_START)
+#define INT_44XX_SPI3_IRQ (91 + IRQ_GIC_START)
+#define INT_44XX_SPI5_IRQ (69 + IRQ_GIC_START)
+
+#define INT_44XX_MCBSP5_IRQ (16 + IRQ_GIC_START)
+#define INT_44xX_MCBSP1_IRQ (17 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ (22 + IRQ_GIC_START)
+#define INT_44XX_MCBSP3_IRQ (23 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ (27 + IRQ_GIC_START)
+#define INT_44XX_HS_USB_MC (92 + IRQ_GIC_START)
+#define INT_44XX_HS_USB_DMA (93 + IRQ_GIC_START)
+
+#define INT_44XX_GPIO_BANK1 (29 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK2 (30 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK3 (31 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK4 (32 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK5 (33 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK6 (34 + IRQ_GIC_START)
+#define INT_44XX_USIM_IRQ (35 + IRQ_GIC_START)
+#define INT_44XX_WDT3_IRQ (36 + IRQ_GIC_START)
+#define INT_44XX_SPI4_IRQ (48 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD52_IRQ (49 + IRQ_GIC_START)
+#define INT_44XX_FPKA_READY_IRQ (50 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD51_IRQ (51 + IRQ_GIC_START)
+#define INT_44XX_RNG_IRQ (52 + IRQ_GIC_START)
+#define INT_44XX_I2C3_IRQ (61 + IRQ_GIC_START)
+#define INT_44XX_FPKA_ERROR_IRQ (64 + IRQ_GIC_START)
+#define INT_44XX_PBIAS_IRQ (75 + IRQ_GIC_START)
+#define INT_44XX_OHCI_IRQ (76 + IRQ_GIC_START)
+#define INT_44XX_EHCI_IRQ (77 + IRQ_GIC_START)
+#define INT_44XX_TLL_IRQ (78 + IRQ_GIC_START)
+#define INT_44XX_PARTHASH_IRQ (79 + IRQ_GIC_START)
+#define INT_44XX_MMC3_IRQ (94 + IRQ_GIC_START)
+
+
/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
* 16 MPUIO lines */
#define OMAP_MAX_GPIO_LINES 192
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index 99ed564d927..9ad41dc484c 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -38,7 +38,8 @@
*/
#if defined(CONFIG_ARCH_OMAP1)
#define PHYS_OFFSET UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
#define PHYS_OFFSET UL(0x80000000)
#endif
diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h
new file mode 100644
index 00000000000..15dec7f1c7c
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap44xx.h
@@ -0,0 +1,46 @@
+/*:
+ * Address mappings and base address for OMAP4 interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_OMAP44XX_H
+#define __ASM_ARCH_OMAP44XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+#define L4_44XX_BASE 0x4a000000
+#define L4_WK_44XX_BASE 0x4a300000
+#define L4_PER_44XX_BASE 0x48000000
+#define L4_EMU_44XX_BASE 0x54000000
+#define L3_44XX_BASE 0x44000000
+#define OMAP4430_32KSYNCT_BASE 0x4a304000
+#define OMAP4430_CM_BASE 0x4a004000
+#define OMAP4430_PRM_BASE 0x48306000
+#define OMAP44XX_GPMC_BASE 0x50000000
+#define OMAP443X_SCM_BASE 0x4a002000
+#define OMAP443X_CTRL_BASE OMAP443X_SCM_BASE
+#define OMAP44XX_IC_BASE 0x48200000
+#define OMAP44XX_IVA_INTC_BASE 0x40000000
+#define IRQ_SIR_IRQ 0x0040
+#define OMAP44XX_GIC_DIST_BASE 0x48241000
+#define OMAP44XX_GIC_CPU_BASE 0x48240100
+#define OMAP44XX_VA_GIC_CPU_BASE IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+#define OMAP44XX_SCU_BASE 0x48240000
+#define OMAP44XX_VA_SCU_BASE IO_ADDRESS(OMAP44XX_SCU_BASE)
+#define OMAP44XX_LOCAL_TWD_BASE 0x48240600
+#define OMAP44XX_VA_LOCAL_TWD_BASE IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
+#define OMAP44XX_LOCAL_TWD_SIZE 0x00000100
+#define OMAP44XX_WKUPGEN_BASE 0x48281000
+#define OMAP44XX_VA_WKUPGEN_BASE IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
+
+#endif /* __ASM_ARCH_OMAP44XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index 8a676a04be4..e37894e423b 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -1,5 +1,8 @@
/*
- * arch/arm/plat-omap/include/mach/serial.h
+ * arch/arm/plat-omap/include/mach/serial.h
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Addded OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -15,19 +18,28 @@
#define OMAP_UART1_BASE 0xfffb0000
#define OMAP_UART2_BASE 0xfffb0800
#define OMAP_UART3_BASE 0xfffb9800
+#define OMAP_MAX_NR_PORTS 3
#elif defined(CONFIG_ARCH_OMAP2)
/* OMAP2 serial ports */
#define OMAP_UART1_BASE 0x4806a000
#define OMAP_UART2_BASE 0x4806c000
#define OMAP_UART3_BASE 0x4806e000
+#define OMAP_MAX_NR_PORTS 3
#elif defined(CONFIG_ARCH_OMAP3)
/* OMAP3 serial ports */
#define OMAP_UART1_BASE 0x4806a000
#define OMAP_UART2_BASE 0x4806c000
#define OMAP_UART3_BASE 0x49020000
+#define OMAP_MAX_NR_PORTS 3
+#elif defined(CONFIG_ARCH_OMAP4)
+/* OMAP4 serial ports */
+#define OMAP_UART1_BASE 0x4806a000
+#define OMAP_UART2_BASE 0x4806c000
+#define OMAP_UART3_BASE 0x48020000
+#define OMAP_UART4_BASE 0x4806e000
+#define OMAP_MAX_NR_PORTS 4
#endif
-#define OMAP_MAX_NR_PORTS 3
#define OMAP1510_BASE_BAUD (12000000/16)
#define OMAP16XX_BASE_BAUD (48000000/16)
#define OMAP24XX_BASE_BAUD (48000000/16)
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index af326efc1ad..9b42d72d96c 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -1,3 +1,14 @@
+/*
+ * Common io.c file
+ * This file is created by Russell King <rmk+kernel@arm.linux.org.uk>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
#include <linux/module.h>
#include <linux/io.h>
#include <linux/mm.h>
@@ -7,6 +18,7 @@
#include <mach/omap16xx.h>
#include <mach/omap24xx.h>
#include <mach/omap34xx.h>
+#include <mach/omap44xx.h>
#define BETWEEN(p,st,sz) ((p) >= (st) && (p) < ((st) + (sz)))
#define XLATE(p,pst,vst) ((void __iomem *)((p) - (pst) + (vst)))
@@ -92,7 +104,22 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT);
}
#endif
-
+#ifdef CONFIG_ARCH_OMAP4
+ if (cpu_is_omap44xx()) {
+ if (BETWEEN(p, L3_44XX_PHYS, L3_44XX_SIZE))
+ return XLATE(p, L3_44XX_PHYS, L3_44XX_VIRT);
+ if (BETWEEN(p, L4_44XX_PHYS, L4_44XX_SIZE))
+ return XLATE(p, L4_44XX_PHYS, L4_44XX_VIRT);
+ if (BETWEEN(p, L4_WK_44XX_PHYS, L4_WK_44XX_SIZE))
+ return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT);
+ if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
+ return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
+ if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE))
+ return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT);
+ if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE))
+ return XLATE(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_VIRT);
+ }
+#endif
return __arm_ioremap(p, size, type);
}
EXPORT_SYMBOL(omap_ioremap);
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 80b040fd5ca..8d329fb2074 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -54,6 +54,9 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
{
struct pin_config *reg;
+ if (cpu_is_omap44xx())
+ return 0;
+
if (mux_cfg == NULL) {
printk(KERN_ERR "Pin mux table not initialized\n");
return -ENODEV;
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 102c9f71a3c..67a90708b68 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -6,6 +6,9 @@
* Copyright (C) 2005 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -44,6 +47,8 @@
#define OMAP3_SRAM_VA 0xd7000000
#define OMAP3_SRAM_PUB_PA 0x40208000
#define OMAP3_SRAM_PUB_VA 0xd7008000
+#define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/
+#define OMAP4_SRAM_VA 0xd7000000 /*0xd70f0000*/
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#define SRAM_BOOTLOADER_SZ 0x00
@@ -87,6 +92,10 @@ static int is_sram_locked(void)
{
int type = 0;
+ if (cpu_is_omap44xx())
+ /* Not yet supported */
+ return 0;
+
if (cpu_is_omap242x())
type = omap_rev() & OMAP2_DEVICETYPE_MASK;
@@ -135,6 +144,10 @@ void __init omap_detect_sram(void)
omap_sram_base = OMAP3_SRAM_VA;
omap_sram_start = OMAP3_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
+ } else if (cpu_is_omap44xx()) {
+ omap_sram_base = OMAP4_SRAM_VA;
+ omap_sram_start = OMAP4_SRAM_PA;
+ omap_sram_size = 0x8000; /* 32K */
} else {
omap_sram_base = OMAP2_SRAM_VA;
omap_sram_start = OMAP2_SRAM_PA;
@@ -203,6 +216,12 @@ void __init omap_map_sram(void)
omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
}
+ if (cpu_is_omap44xx()) {
+ omap_sram_io_desc[0].virtual = OMAP4_SRAM_VA;
+ base = OMAP4_SRAM_PA;
+ base = ROUND_DOWN(base, PAGE_SIZE);
+ omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+ }
omap_sram_io_desc[0].length = 1024 * 1024; /* Use section desc */
iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
@@ -391,6 +410,8 @@ int __init omap_sram_init(void)
omap243x_sram_init();
else if (cpu_is_omap34xx())
omap34xx_sram_init();
+ else if (cpu_is_omap44xx())
+ omap34xx_sram_init(); /* FIXME: */
return 0;
}