summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/m68k/include/asm/cacheflush_no.h2
-rw-r--r--arch/m68k/include/asm/coldfire.h4
-rw-r--r--arch/m68k/include/asm/gpio.h7
-rw-r--r--arch/m68k/include/asm/m548xgpt.h88
-rw-r--r--arch/m68k/include/asm/m548xsim.h55
-rw-r--r--arch/m68k/include/asm/mcfcache.h2
-rw-r--r--arch/m68k/include/asm/mcfsim.h2
-rw-r--r--arch/m68k/include/asm/mcfslt.h44
-rw-r--r--arch/m68k/include/asm/mcfuart.h9
-rw-r--r--arch/m68k/kernel/asm-offsets.c12
-rw-r--r--arch/m68knommu/Kconfig11
-rw-r--r--arch/m68knommu/Makefile3
-rw-r--r--arch/m68knommu/kernel/.gitignore1
-rw-r--r--arch/m68knommu/kernel/asm-offsets.c11
-rw-r--r--arch/m68knommu/kernel/ptrace.c47
-rw-r--r--arch/m68knommu/kernel/setup.c3
-rw-r--r--arch/m68knommu/kernel/time.c13
-rw-r--r--arch/m68knommu/kernel/traps.c26
-rw-r--r--arch/m68knommu/platform/5206/Makefile4
-rw-r--r--arch/m68knommu/platform/5206e/Makefile4
-rw-r--r--arch/m68knommu/platform/520x/Makefile4
-rw-r--r--arch/m68knommu/platform/523x/Makefile4
-rw-r--r--arch/m68knommu/platform/5249/Makefile4
-rw-r--r--arch/m68knommu/platform/5272/Makefile4
-rw-r--r--arch/m68knommu/platform/5272/config.c16
-rw-r--r--arch/m68knommu/platform/5272/intc.c60
-rw-r--r--arch/m68knommu/platform/527x/Makefile4
-rw-r--r--arch/m68knommu/platform/528x/Makefile4
-rw-r--r--arch/m68knommu/platform/5307/Makefile4
-rw-r--r--arch/m68knommu/platform/532x/Makefile4
-rw-r--r--arch/m68knommu/platform/5407/Makefile4
-rw-r--r--arch/m68knommu/platform/548x/Makefile18
-rw-r--r--arch/m68knommu/platform/548x/config.c115
-rw-r--r--arch/m68knommu/platform/68328/entry.S36
-rw-r--r--arch/m68knommu/platform/68328/head-de2.S6
-rw-r--r--arch/m68knommu/platform/68328/head-ram.S27
-rw-r--r--arch/m68knommu/platform/68328/ints.c6
-rw-r--r--arch/m68knommu/platform/68360/entry.S13
-rw-r--r--arch/m68knommu/platform/68360/ints.c6
-rw-r--r--arch/m68knommu/platform/68VZ328/config.c5
-rw-r--r--arch/m68knommu/platform/coldfire/Makefile5
-rw-r--r--arch/m68knommu/platform/coldfire/entry.S4
-rw-r--r--arch/m68knommu/platform/coldfire/intc-2.c53
-rw-r--r--arch/m68knommu/platform/coldfire/intc-simr.c10
-rw-r--r--arch/m68knommu/platform/coldfire/intc.c8
-rw-r--r--arch/m68knommu/platform/coldfire/sltimers.c145
46 files changed, 707 insertions, 210 deletions
diff --git a/arch/m68k/include/asm/cacheflush_no.h b/arch/m68k/include/asm/cacheflush_no.h
index 89f195656be..7085bd51668 100644
--- a/arch/m68k/include/asm/cacheflush_no.h
+++ b/arch/m68k/include/asm/cacheflush_no.h
@@ -29,7 +29,7 @@
static inline void __flush_cache_all(void)
{
-#ifdef CONFIG_M5407
+#if defined(CONFIG_M5407) || defined(CONFIG_M548x)
/*
* Use cpushl to push and invalidate all cache lines.
* Gas doesn't seem to know how to generate the ColdFire
diff --git a/arch/m68k/include/asm/coldfire.h b/arch/m68k/include/asm/coldfire.h
index 83a9fa4e618..3b0a34d0fe3 100644
--- a/arch/m68k/include/asm/coldfire.h
+++ b/arch/m68k/include/asm/coldfire.h
@@ -32,7 +32,9 @@
*/
#define MCF_MBAR 0x10000000
#define MCF_MBAR2 0x80000000
-#if defined(CONFIG_M520x)
+#if defined(CONFIG_M548x)
+#define MCF_IPSBAR MCF_MBAR
+#elif defined(CONFIG_M520x)
#define MCF_IPSBAR 0xFC000000
#else
#define MCF_IPSBAR 0x40000000
diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h
index 283214dc65a..1b57adbafad 100644
--- a/arch/m68k/include/asm/gpio.h
+++ b/arch/m68k/include/asm/gpio.h
@@ -36,7 +36,8 @@
*/
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
- defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+ defined(CONFIG_M532x) || defined(CONFIG_M548x)
/* These parts have GPIO organized by 8 bit ports */
@@ -136,6 +137,8 @@ static inline u32 __mcf_gpio_ppdr(unsigned gpio)
#endif
else
return MCFGPIO_PPDR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
+#else
+ return 0;
#endif
}
@@ -173,6 +176,8 @@ static inline u32 __mcf_gpio_podr(unsigned gpio)
#endif
else
return MCFGPIO_PODR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
+#else
+ return 0;
#endif
}
diff --git a/arch/m68k/include/asm/m548xgpt.h b/arch/m68k/include/asm/m548xgpt.h
new file mode 100644
index 00000000000..c8ef158a1c4
--- /dev/null
+++ b/arch/m68k/include/asm/m548xgpt.h
@@ -0,0 +1,88 @@
+/*
+ * File: m548xgpt.h
+ * Purpose: Register and bit definitions for the MCF548X
+ *
+ * Notes:
+ *
+ */
+
+#ifndef m548xgpt_h
+#define m548xgpt_h
+
+/*********************************************************************
+*
+* General Purpose Timers (GPT)
+*
+*********************************************************************/
+
+/* Register read/write macros */
+#define MCF_GPT_GMS0 0x000800
+#define MCF_GPT_GCIR0 0x000804
+#define MCF_GPT_GPWM0 0x000808
+#define MCF_GPT_GSR0 0x00080C
+#define MCF_GPT_GMS1 0x000810
+#define MCF_GPT_GCIR1 0x000814
+#define MCF_GPT_GPWM1 0x000818
+#define MCF_GPT_GSR1 0x00081C
+#define MCF_GPT_GMS2 0x000820
+#define MCF_GPT_GCIR2 0x000824
+#define MCF_GPT_GPWM2 0x000828
+#define MCF_GPT_GSR2 0x00082C
+#define MCF_GPT_GMS3 0x000830
+#define MCF_GPT_GCIR3 0x000834
+#define MCF_GPT_GPWM3 0x000838
+#define MCF_GPT_GSR3 0x00083C
+#define MCF_GPT_GMS(x) (0x000800+((x)*0x010))
+#define MCF_GPT_GCIR(x) (0x000804+((x)*0x010))
+#define MCF_GPT_GPWM(x) (0x000808+((x)*0x010))
+#define MCF_GPT_GSR(x) (0x00080C+((x)*0x010))
+
+/* Bit definitions and macros for MCF_GPT_GMS */
+#define MCF_GPT_GMS_TMS(x) (((x)&0x00000007)<<0)
+#define MCF_GPT_GMS_GPIO(x) (((x)&0x00000003)<<4)
+#define MCF_GPT_GMS_IEN (0x00000100)
+#define MCF_GPT_GMS_OD (0x00000200)
+#define MCF_GPT_GMS_SC (0x00000400)
+#define MCF_GPT_GMS_CE (0x00001000)
+#define MCF_GPT_GMS_WDEN (0x00008000)
+#define MCF_GPT_GMS_ICT(x) (((x)&0x00000003)<<16)
+#define MCF_GPT_GMS_OCT(x) (((x)&0x00000003)<<20)
+#define MCF_GPT_GMS_OCPW(x) (((x)&0x000000FF)<<24)
+#define MCF_GPT_GMS_OCT_FRCLOW (0x00000000)
+#define MCF_GPT_GMS_OCT_PULSEHI (0x00100000)
+#define MCF_GPT_GMS_OCT_PULSELO (0x00200000)
+#define MCF_GPT_GMS_OCT_TOGGLE (0x00300000)
+#define MCF_GPT_GMS_ICT_ANY (0x00000000)
+#define MCF_GPT_GMS_ICT_RISE (0x00010000)
+#define MCF_GPT_GMS_ICT_FALL (0x00020000)
+#define MCF_GPT_GMS_ICT_PULSE (0x00030000)
+#define MCF_GPT_GMS_GPIO_INPUT (0x00000000)
+#define MCF_GPT_GMS_GPIO_OUTLO (0x00000020)
+#define MCF_GPT_GMS_GPIO_OUTHI (0x00000030)
+#define MCF_GPT_GMS_TMS_DISABLE (0x00000000)
+#define MCF_GPT_GMS_TMS_INCAPT (0x00000001)
+#define MCF_GPT_GMS_TMS_OUTCAPT (0x00000002)
+#define MCF_GPT_GMS_TMS_PWM (0x00000003)
+#define MCF_GPT_GMS_TMS_GPIO (0x00000004)
+
+/* Bit definitions and macros for MCF_GPT_GCIR */
+#define MCF_GPT_GCIR_CNT(x) (((x)&0x0000FFFF)<<0)
+#define MCF_GPT_GCIR_PRE(x) (((x)&0x0000FFFF)<<16)
+
+/* Bit definitions and macros for MCF_GPT_GPWM */
+#define MCF_GPT_GPWM_LOAD (0x00000001)
+#define MCF_GPT_GPWM_PWMOP (0x00000100)
+#define MCF_GPT_GPWM_WIDTH(x) (((x)&0x0000FFFF)<<16)
+
+/* Bit definitions and macros for MCF_GPT_GSR */
+#define MCF_GPT_GSR_CAPT (0x00000001)
+#define MCF_GPT_GSR_COMP (0x00000002)
+#define MCF_GPT_GSR_PWMP (0x00000004)
+#define MCF_GPT_GSR_TEXP (0x00000008)
+#define MCF_GPT_GSR_PIN (0x00000100)
+#define MCF_GPT_GSR_OVF(x) (((x)&0x00000007)<<12)
+#define MCF_GPT_GSR_CAPTURE(x) (((x)&0x0000FFFF)<<16)
+
+/********************************************************************/
+
+#endif /* m548xgpt_h */
diff --git a/arch/m68k/include/asm/m548xsim.h b/arch/m68k/include/asm/m548xsim.h
new file mode 100644
index 00000000000..149135ef30d
--- /dev/null
+++ b/arch/m68k/include/asm/m548xsim.h
@@ -0,0 +1,55 @@
+/*
+ * m548xsim.h -- ColdFire 547x/548x System Integration Unit support.
+ */
+
+#ifndef m548xsim_h
+#define m548xsim_h
+
+#define MCFINT_VECBASE 64
+
+/*
+ * Interrupt Controller Registers
+ */
+#define MCFICM_INTC0 0x0700 /* Base for Interrupt Ctrl 0 */
+#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
+#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
+#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
+#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
+#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
+#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
+#define MCFINTC_IRLR 0x18 /* */
+#define MCFINTC_IACKL 0x19 /* */
+#define MCFINTC_ICR0 0x40 /* Base ICR register */
+
+/*
+ * Define system peripheral IRQ usage.
+ */
+#define MCF_IRQ_TIMER (64 + 54) /* Slice Timer 0 */
+#define MCF_IRQ_PROFILER (64 + 53) /* Slice Timer 1 */
+
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PIN_MAX 0 /* I am too lazy to count */
+#define MCFGPIO_IRQ_MAX -1
+#define MCFGPIO_IRQ_VECBASE -1
+
+/*
+ * Some PSC related definitions
+ */
+#define MCF_PAR_PSC(x) (0x000A4F-((x)&0x3))
+#define MCF_PAR_SDA (0x0008)
+#define MCF_PAR_SCL (0x0004)
+#define MCF_PAR_PSC_TXD (0x04)
+#define MCF_PAR_PSC_RXD (0x08)
+#define MCF_PAR_PSC_RTS(x) (((x)&0x03)<<4)
+#define MCF_PAR_PSC_CTS(x) (((x)&0x03)<<6)
+#define MCF_PAR_PSC_CTS_GPIO (0x00)
+#define MCF_PAR_PSC_CTS_BCLK (0x80)
+#define MCF_PAR_PSC_CTS_CTS (0xC0)
+#define MCF_PAR_PSC_RTS_GPIO (0x00)
+#define MCF_PAR_PSC_RTS_FSYNC (0x20)
+#define MCF_PAR_PSC_RTS_RTS (0x30)
+#define MCF_PAR_PSC_CANRX (0x40)
+
+#endif /* m548xsim_h */
diff --git a/arch/m68k/include/asm/mcfcache.h b/arch/m68k/include/asm/mcfcache.h
index c042634fada..f49dfc09f70 100644
--- a/arch/m68k/include/asm/mcfcache.h
+++ b/arch/m68k/include/asm/mcfcache.h
@@ -107,7 +107,7 @@
.endm
#endif /* CONFIG_M532x */
-#if defined(CONFIG_M5407)
+#if defined(CONFIG_M5407) || defined(CONFIG_M548x)
/*
* Version 4 cores have a true harvard style separate instruction
* and data cache. Invalidate and enable cache, also enable write
diff --git a/arch/m68k/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h
index 9c70a67bf85..6901fd68165 100644
--- a/arch/m68k/include/asm/mcfsim.h
+++ b/arch/m68k/include/asm/mcfsim.h
@@ -41,6 +41,8 @@
#elif defined(CONFIG_M5407)
#include <asm/m5407sim.h>
#include <asm/mcfintc.h>
+#elif defined(CONFIG_M548x)
+#include <asm/m548xsim.h>
#endif
/****************************************************************************/
diff --git a/arch/m68k/include/asm/mcfslt.h b/arch/m68k/include/asm/mcfslt.h
new file mode 100644
index 00000000000..d0d0ecba533
--- /dev/null
+++ b/arch/m68k/include/asm/mcfslt.h
@@ -0,0 +1,44 @@
+/****************************************************************************/
+
+/*
+ * mcfslt.h -- ColdFire internal Slice (SLT) timer support defines.
+ *
+ * (C) Copyright 2004, Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2009, Philippe De Muyter (phdm@macqel.be)
+ */
+
+/****************************************************************************/
+#ifndef mcfslt_h
+#define mcfslt_h
+/****************************************************************************/
+
+/*
+ * Get address specific defines for the 547x.
+ */
+#define MCFSLT_TIMER0 0x900 /* Base address of TIMER0 */
+#define MCFSLT_TIMER1 0x910 /* Base address of TIMER1 */
+
+
+/*
+ * Define the SLT timer register set addresses.
+ */
+#define MCFSLT_STCNT 0x00 /* Terminal count */
+#define MCFSLT_SCR 0x04 /* Control */
+#define MCFSLT_SCNT 0x08 /* Current count */
+#define MCFSLT_SSR 0x0C /* Status */
+
+/*
+ * Bit definitions for the SCR control register.
+ */
+#define MCFSLT_SCR_RUN 0x04000000 /* Run mode (continuous) */
+#define MCFSLT_SCR_IEN 0x02000000 /* Interrupt enable */
+#define MCFSLT_SCR_TEN 0x01000000 /* Timer enable */
+
+/*
+ * Bit definitions for the SSR status register.
+ */
+#define MCFSLT_SSR_BE 0x02000000 /* Bus error condition */
+#define MCFSLT_SSR_TE 0x01000000 /* Timeout condition */
+
+/****************************************************************************/
+#endif /* mcfslt_h */
diff --git a/arch/m68k/include/asm/mcfuart.h b/arch/m68k/include/asm/mcfuart.h
index 01a8716c5fc..db72e2b889c 100644
--- a/arch/m68k/include/asm/mcfuart.h
+++ b/arch/m68k/include/asm/mcfuart.h
@@ -47,6 +47,11 @@
#define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */
#define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */
#define MCFUART_BASE3 0xfc068000 /* Base address of UART3 */
+#elif defined(CONFIG_M548x)
+#define MCFUART_BASE1 0x8600 /* on M548x */
+#define MCFUART_BASE2 0x8700 /* on M548x */
+#define MCFUART_BASE3 0x8800 /* on M548x */
+#define MCFUART_BASE4 0x8900 /* on M548x */
#endif
@@ -212,7 +217,9 @@ struct mcf_platform_uart {
#define MCFUART_URF_RXS 0xc0 /* Receiver status */
#endif
-#if defined(CONFIG_M5272)
+#if defined(CONFIG_M548x)
+#define MCFUART_TXFIFOSIZE 512
+#elif defined(CONFIG_M5272)
#define MCFUART_TXFIFOSIZE 25
#else
#define MCFUART_TXFIFOSIZE 1
diff --git a/arch/m68k/kernel/asm-offsets.c b/arch/m68k/kernel/asm-offsets.c
index 73e5e581245..78e59b82ebc 100644
--- a/arch/m68k/kernel/asm-offsets.c
+++ b/arch/m68k/kernel/asm-offsets.c
@@ -22,13 +22,9 @@
int main(void)
{
/* offsets into the task struct */
- DEFINE(TASK_STATE, offsetof(struct task_struct, state));
- DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
- DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
DEFINE(TASK_INFO, offsetof(struct task_struct, thread.info));
DEFINE(TASK_MM, offsetof(struct task_struct, mm));
- DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
#ifdef CONFIG_MMU
DEFINE(TASK_TINFO, offsetof(struct task_struct, thread.info));
#endif
@@ -64,14 +60,6 @@ int main(void)
/* bitfields are a bit difficult */
DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, pc) + 4);
- /* offsets into the irq_handler struct */
- DEFINE(IRQ_HANDLER, offsetof(struct irq_node, handler));
- DEFINE(IRQ_DEVID, offsetof(struct irq_node, dev_id));
- DEFINE(IRQ_NEXT, offsetof(struct irq_node, next));
-
- /* offsets into the kernel_stat struct */
- DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs));
-
/* offsets into the irq_cpustat_t struct */
DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending));
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 2609c394e1d..9287150e5fb 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -59,6 +59,10 @@ config GENERIC_HARDIRQS
bool
default y
+config GENERIC_HARDIRQS_NO__DO_IRQ
+ bool
+ default y
+
config GENERIC_CALIBRATE_DELAY
bool
default y
@@ -171,6 +175,11 @@ config M5407
help
Motorola ColdFire 5407 processor support.
+config M548x
+ bool "MCF548x"
+ help
+ Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support.
+
endchoice
config M527x
@@ -181,7 +190,7 @@ config M527x
config COLDFIRE
bool
- depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407)
+ depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407 || M548x)
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
default y
diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile
index 14042574ac2..026ef16fa68 100644
--- a/arch/m68knommu/Makefile
+++ b/arch/m68knommu/Makefile
@@ -25,6 +25,7 @@ platform-$(CONFIG_M528x) := 528x
platform-$(CONFIG_M5307) := 5307
platform-$(CONFIG_M532x) := 532x
platform-$(CONFIG_M5407) := 5407
+platform-$(CONFIG_M548x) := 548x
PLATFORM := $(platform-y)
board-$(CONFIG_PILOT) := pilot
@@ -73,6 +74,7 @@ cpuclass-$(CONFIG_M528x) := coldfire
cpuclass-$(CONFIG_M5307) := coldfire
cpuclass-$(CONFIG_M532x) := coldfire
cpuclass-$(CONFIG_M5407) := coldfire
+cpuclass-$(CONFIG_M548x) := coldfire
cpuclass-$(CONFIG_M68328) := 68328
cpuclass-$(CONFIG_M68EZ328) := 68328
cpuclass-$(CONFIG_M68VZ328) := 68328
@@ -100,6 +102,7 @@ cflags-$(CONFIG_M528x) := $(call cc-option,-m528x,-m5307)
cflags-$(CONFIG_M5307) := $(call cc-option,-m5307,-m5200)
cflags-$(CONFIG_M532x) := $(call cc-option,-mcpu=532x,-m5307)
cflags-$(CONFIG_M5407) := $(call cc-option,-m5407,-m5200)
+cflags-$(CONFIG_M548x) := $(call cc-option,-m5407,-m5200)
cflags-$(CONFIG_M68328) := -m68000
cflags-$(CONFIG_M68EZ328) := -m68000
cflags-$(CONFIG_M68VZ328) := -m68000
diff --git a/arch/m68knommu/kernel/.gitignore b/arch/m68knommu/kernel/.gitignore
new file mode 100644
index 00000000000..c5f676c3c22
--- /dev/null
+++ b/arch/m68knommu/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/m68knommu/kernel/asm-offsets.c b/arch/m68knommu/kernel/asm-offsets.c
index 24335022fa2..ffe02f41ad4 100644
--- a/arch/m68knommu/kernel/asm-offsets.c
+++ b/arch/m68knommu/kernel/asm-offsets.c
@@ -21,14 +21,8 @@
int main(void)
{
/* offsets into the task struct */
- DEFINE(TASK_STATE, offsetof(struct task_struct, state));
- DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
- DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
- DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
- DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, stack));
DEFINE(TASK_MM, offsetof(struct task_struct, mm));
- DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
/* offsets into the irq_cpustat_t struct */
DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending));
@@ -63,7 +57,7 @@ int main(void)
DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, sr) - 2);
#else
/* bitfields are a bit difficult */
- DEFINE(PT_OFF_VECTOR, offsetof(struct pt_regs, pc) + 4);
+ DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, pc) + 4);
#endif
/* signal defines */
@@ -75,11 +69,8 @@ int main(void)
DEFINE(PT_PTRACED, PT_PTRACED);
/* Offsets in thread_info structure */
- DEFINE(TI_TASK, offsetof(struct thread_info, task));
- DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
DEFINE(TI_PREEMPTCOUNT, offsetof(struct thread_info, preempt_count));
- DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
return 0;
}
diff --git a/arch/m68knommu/kernel/ptrace.c b/arch/m68knommu/kernel/ptrace.c
index f6be1248d21..6fe7c38cd55 100644
--- a/arch/m68knommu/kernel/ptrace.c
+++ b/arch/m68knommu/kernel/ptrace.c
@@ -18,6 +18,7 @@
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/signal.h>
+#include <linux/tracehook.h>
#include <asm/uaccess.h>
#include <asm/page.h>
@@ -134,14 +135,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
tmp >>= 16;
} else if (addr >= 21 && addr < 49) {
tmp = child->thread.fp[addr - 21];
-#ifdef CONFIG_M68KFPU_EMU
- /* Convert internal fpu reg representation
- * into long double format
- */
- if (FPU_IS_EMU && (addr < 45) && !(addr % 3))
- tmp = ((tmp & 0xffff0000) << 15) |
- ((tmp & 0x0000ffff) << 16);
-#endif
} else if (addr == 49) {
tmp = child->mm->start_code;
} else if (addr == 50) {
@@ -175,16 +168,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
}
if (addr >= 21 && addr < 48)
{
-#ifdef CONFIG_M68KFPU_EMU
- /* Convert long double format
- * into internal fpu reg representation
- */
- if (FPU_IS_EMU && (addr < 45) && !(addr % 3)) {
- data = (unsigned long)data << 15;
- data = (data & 0xffff0000) |
- ((data & 0x0000ffff) >> 1);
- }
-#endif
child->thread.fp[addr - 21] = data;
ret = 0;
}
@@ -259,21 +242,17 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
return ret;
}
-asmlinkage void syscall_trace(void)
+asmlinkage int syscall_trace_enter(void)
{
- if (!test_thread_flag(TIF_SYSCALL_TRACE))
- return;
- if (!(current->ptrace & PT_PTRACED))
- return;
- ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
- ? 0x80 : 0));
- /*
- * this isn't the same as continuing with a signal, but it will do
- * for normal use. strace only continues with a signal if the
- * stopping signal is not SIGTRAP. -brl
- */
- if (current->exit_code) {
- send_sig(current->exit_code, current, 1);
- current->exit_code = 0;
- }
+ int ret = 0;
+
+ if (test_thread_flag(TIF_SYSCALL_TRACE))
+ ret = tracehook_report_syscall_entry(task_pt_regs(current));
+ return ret;
+}
+
+asmlinkage void syscall_trace_leave(void)
+{
+ if (test_thread_flag(TIF_SYSCALL_TRACE))
+ tracehook_report_syscall_exit(task_pt_regs(current), 0);
}
diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c
index ba92b90d5fb..c684adf5dc4 100644
--- a/arch/m68knommu/kernel/setup.c
+++ b/arch/m68knommu/kernel/setup.c
@@ -54,9 +54,6 @@ void (*mach_reset)(void);
void (*mach_halt)(void);
void (*mach_power_off)(void);
-#ifdef CONFIG_M68000
- #define CPU "MC68000"
-#endif
#ifdef CONFIG_M68328
#define CPU "MC68328"
#endif
diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c
index 7089dd9d843..d6ac2a43453 100644
--- a/arch/m68knommu/kernel/time.c
+++ b/arch/m68knommu/kernel/time.c
@@ -60,13 +60,16 @@ static unsigned long read_rtc_mmss(void)
{
unsigned int year, mon, day, hour, min, sec;
- if (mach_gettod)
+ if (mach_gettod) {
mach_gettod(&year, &mon, &day, &hour, &min, &sec);
- else
- year = mon = day = hour = min = sec = 0;
+ if ((year += 1900) < 1970)
+ year += 100;
+ } else {
+ year = 1970;
+ mon = day = 1;
+ hour = min = sec = 0;
+ }
- if ((year += 1900) < 1970)
- year += 100;
return mktime(year, mon, day, hour, min, sec);
}
diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c
index 3739c8f657d..a768008dfd0 100644
--- a/arch/m68knommu/kernel/traps.c
+++ b/arch/m68knommu/kernel/traps.c
@@ -179,14 +179,16 @@ static void __show_stack(struct task_struct *task, unsigned long *stack)
void bad_super_trap(struct frame *fp)
{
+ int vector = (fp->ptregs.vector >> 2) & 0xff;
+
console_verbose();
- if (fp->ptregs.vector < 4 * ARRAY_SIZE(vec_names))
+ if (vector < ARRAY_SIZE(vec_names))
printk (KERN_WARNING "*** %s *** FORMAT=%X\n",
- vec_names[(fp->ptregs.vector) >> 2],
+ vec_names[vector],
fp->ptregs.format);
else
printk (KERN_WARNING "*** Exception %d *** FORMAT=%X\n",
- (fp->ptregs.vector) >> 2,
+ vector,
fp->ptregs.format);
printk (KERN_WARNING "Current process id is %d\n", current->pid);
die_if_kernel("BAD KERNEL TRAP", &fp->ptregs, 0);
@@ -195,10 +197,11 @@ void bad_super_trap(struct frame *fp)
asmlinkage void trap_c(struct frame *fp)
{
int sig;
+ int vector = (fp->ptregs.vector >> 2) & 0xff;
siginfo_t info;
if (fp->ptregs.sr & PS_S) {
- if ((fp->ptregs.vector >> 2) == VEC_TRACE) {
+ if (vector == VEC_TRACE) {
/* traced a trapping instruction */
} else
bad_super_trap(fp);
@@ -206,7 +209,7 @@ asmlinkage void trap_c(struct frame *fp)
}
/* send the appropriate signal to the user program */
- switch ((fp->ptregs.vector) >> 2) {
+ switch (vector) {
case VEC_ADDRERR:
info.si_code = BUS_ADRALN;
sig = SIGBUS;
@@ -360,16 +363,3 @@ void show_stack(struct task_struct *task, unsigned long *stack)
else
__show_stack(task, stack);
}
-
-#ifdef CONFIG_M68KFPU_EMU
-asmlinkage void fpemu_signal(int signal, int code, void *addr)
-{
- siginfo_t info;
-
- info.si_signo = signal;
- info.si_errno = 0;
- info.si_code = code;
- info.si_addr = addr;
- force_sig_info(signal, &info, current);
-}
-#endif
diff --git a/arch/m68knommu/platform/5206/Makefile b/arch/m68knommu/platform/5206/Makefile
index 113c3339006..b5db05625cf 100644
--- a/arch/m68knommu/platform/5206/Makefile
+++ b/arch/m68knommu/platform/5206/Makefile
@@ -8,8 +8,8 @@
# on the console port whenever a DBG interrupt occurs. You have to
# set up you HW breakpoints to trigger a DBG interrupt:
#
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
#
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
diff --git a/arch/m68knommu/platform/5206e/Makefile b/arch/m68knommu/platform/5206e/Makefile
index 113c3339006..b5db05625cf 100644
--- a/arch/m68knommu/platform/5206e/Makefile
+++ b/arch/m68knommu/platform/5206e/Makefile
@@ -8,8 +8,8 @@
# on the console port whenever a DBG interrupt occurs. You have to
# set up you HW breakpoints to trigger a DBG interrupt:
#
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
#
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
diff --git a/arch/m68knommu/platform/520x/Makefile b/arch/m68knommu/platform/520x/Makefile
index 435ab3483dc..ad3f4e5a57c 100644
--- a/arch/m68knommu/platform/520x/Makefile
+++ b/arch/m68knommu/platform/520x/Makefile
@@ -8,8 +8,8 @@
# on the console port whenever a DBG interrupt occurs. You have to
# set up you HW breakpoints to trigger a DBG interrupt:
#
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
#
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
diff --git a/arch/m68knommu/platform/523x/Makefile b/arch/m68knommu/platform/523x/Makefile
index b8f9b45440c..c04b8f71c88 100644
--- a/arch/m68knommu/platform/523x/Makefile
+++ b/arch/m68knommu/platform/523x/Makefile
@@ -8,8 +8,8 @@
# on the console port whenever a DBG interrupt occurs. You have to
# set up you HW breakpoints to trigger a DBG interrupt:
#
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
#
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
diff --git a/arch/m68knommu/platform/5249/Makefile b/arch/m68knommu/platform/5249/Makefile
index f56225d1582..4bed30fd007 100644
--- a/arch/m68knommu/platform/5249/Makefile
+++ b/arch/m68knommu/platform/5249/Makefile
@@ -8,8 +8,8 @@
# on the console port whenever a DBG interrupt occurs. You have to
# set up you HW breakpoints to trigger a DBG interrupt:
#
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
#
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
diff --git a/arch/m68knommu/platform/5272/Makefile b/arch/m68knommu/platform/5272/Makefile
index 93673ef8e2c..34110fc1430 100644
--- a/arch/m68knommu/platform/5272/Makefile
+++ b/arch/m68knommu/platform/5272/Makefile
@@ -8,8 +8,8 @@
# on the console port whenever a DBG interrupt occurs. You have to
# set up you HW breakpoints to trigger a DBG interrupt:
#
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
#
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
diff --git a/arch/m68knommu/platform/5272/config.c b/arch/m68knommu/platform/5272/config.c
index 59278c0887d..65bb582734e 100644
--- a/arch/m68knommu/platform/5272/config.c
+++ b/arch/m68knommu/platform/5272/config.c
@@ -13,6 +13,8 @@
#include <linux/param.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
@@ -148,9 +150,23 @@ void __init config_BSP(char *commandp, int size)
/***************************************************************************/
+/*
+ * Some 5272 based boards have the FEC ethernet diectly connected to
+ * an ethernet switch. In this case we need to use the fixed phy type,
+ * and we need to declare it early in boot.
+ */
+static struct fixed_phy_status nettel_fixed_phy_status __initdata = {
+ .link = 1,
+ .speed = 100,
+ .duplex = 0,
+};
+
+/***************************************************************************/
+
static int __init init_BSP(void)
{
m5272_uarts_init();
+ fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status);
platform_add_devices(m5272_devices, ARRAY_SIZE(m5272_devices));
return 0;
}
diff --git a/arch/m68knommu/platform/5272/intc.c b/arch/m68knommu/platform/5272/intc.c
index 7081e0a9720..3cf681c177a 100644
--- a/arch/m68knommu/platform/5272/intc.c
+++ b/arch/m68knommu/platform/5272/intc.c
@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/coldfire.h>
@@ -29,6 +30,10 @@
* via a set of 4 "Interrupt Controller Registers" (ICR). There is a
* loose mapping of vector number to register and internal bits, but
* a table is the easiest and quickest way to map them.
+ *
+ * Note that the external interrupts are edge triggered (unlike the
+ * internal interrupt sources which are level triggered). Which means
+ * they also need acknowledgeing via acknowledge bits.
*/
struct irqmap {
unsigned char icr;
@@ -68,6 +73,11 @@ static struct irqmap intc_irqmap[MCFINT_VECMAX - MCFINT_VECBASE] = {
/*MCF_IRQ_SWTO*/ { .icr = MCFSIM_ICR4, .index = 16, .ack = 0, },
};
+/*
+ * The act of masking the interrupt also has a side effect of 'ack'ing
+ * an interrupt on this irq (for the external irqs). So this mask function
+ * is also an ack_mask function.
+ */
static void intc_irq_mask(unsigned int irq)
{
if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
@@ -95,7 +105,9 @@ static void intc_irq_ack(unsigned int irq)
irq -= MCFINT_VECBASE;
if (intc_irqmap[irq].ack) {
u32 v;
- v = 0xd << intc_irqmap[irq].index;
+ v = readl(MCF_MBAR + intc_irqmap[irq].icr);
+ v &= (0x7 << intc_irqmap[irq].index);
+ v |= (0x8 << intc_irqmap[irq].index);
writel(v, MCF_MBAR + intc_irqmap[irq].icr);
}
}
@@ -103,21 +115,47 @@ static void intc_irq_ack(unsigned int irq)
static int intc_irq_set_type(unsigned int irq, unsigned int type)
{
- /* We can set the edge type here for external interrupts */
+ if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
+ irq -= MCFINT_VECBASE;
+ if (intc_irqmap[irq].ack) {
+ u32 v;
+ v = readl(MCF_MBAR + MCFSIM_PITR);
+ if (type == IRQ_TYPE_EDGE_FALLING)
+ v &= ~(0x1 << (32 - irq));
+ else
+ v |= (0x1 << (32 - irq));
+ writel(v, MCF_MBAR + MCFSIM_PITR);
+ }
+ }
return 0;
}
+/*
+ * Simple flow handler to deal with the external edge triggered interrupts.
+ * We need to be careful with the masking/acking due to the side effects
+ * of masking an interrupt.
+ */
+static void intc_external_irq(unsigned int irq, struct irq_desc *desc)
+{
+ kstat_incr_irqs_this_cpu(irq, desc);
+ desc->status |= IRQ_INPROGRESS;
+ desc->chip->ack(irq);
+ handle_IRQ_event(irq, desc->action);
+ desc->status &= ~IRQ_INPROGRESS;
+}
+
static struct irq_chip intc_irq_chip = {
.name = "CF-INTC",
.mask = intc_irq_mask,
.unmask = intc_irq_unmask,
+ .mask_ack = intc_irq_mask,
.ack = intc_irq_ack,
.set_type = intc_irq_set_type,
};
void __init init_IRQ(void)
{
- int irq;
+ int irq, edge;
init_vectors();
@@ -128,11 +166,17 @@ void __init init_IRQ(void)
writel(0x88888888, MCF_MBAR + MCFSIM_ICR4);
for (irq = 0; (irq < NR_IRQS); irq++) {
- irq_desc[irq].status = IRQ_DISABLED;
- irq_desc[irq].action = NULL;
- irq_desc[irq].depth = 1;
- irq_desc[irq].chip = &intc_irq_chip;
- intc_irq_set_type(irq, 0);
+ set_irq_chip(irq, &intc_irq_chip);
+ edge = 0;
+ if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX))
+ edge = intc_irqmap[irq - MCFINT_VECBASE].ack;
+ if (edge) {
+ set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
+ set_irq_handler(irq, intc_external_irq);
+ } else {
+ set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+ set_irq_handler(irq, handle_level_irq);
+ }
}
}
diff --git a/arch/m68knommu/platform/527x/Makefile b/arch/m68knommu/platform/527x/Makefile
index 3d90e6d9245..6ac4b57370e 100644
--- a/arch/m68knommu/platform/527x/Makefile
+++ b/arch/m68knommu/platform/527x/Makefile
@@ -8,8 +8,8 @@
# on the console port whenever a DBG interrupt occurs. You have to
# set up you HW breakpoints to trigger a DBG interrupt:
#
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
#
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
diff --git a/arch/m68knommu/platform/528x/Makefile b/arch/m68knommu/platform/528x/Makefile
index 3d90e6d9245..6ac4b57370e 100644
--- a/arch/m68knommu/platform/528x/Makefile
+++ b/arch/m68knommu/platform/528x/Makefile
@@ -8,8 +8,8 @@
# on the console port whenever a DBG interrupt occurs. You have to
# set up you HW breakpoints to trigger a DBG interrupt:
#
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
#
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
diff --git a/arch/m68knommu/platform/5307/Makefile b/arch/m68knommu/platform/5307/Makefile
index 6de52697682..d4293b791f2 100644
--- a/arch/m68knommu/platform/5307/Makefile
+++ b/arch/m68knommu/platform/5307/Makefile
@@ -8,8 +8,8 @@
# on the console port whenever a DBG interrupt occurs. You have to
# set up you HW breakpoints to trigger a DBG interrupt:
#
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
#
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
diff --git a/arch/m68knommu/platform/532x/Makefile b/arch/m68knommu/platform/532x/Makefile
index 4cc23245bcd..ce01669399c 100644
--- a/arch/m68knommu/platform/532x/Makefile
+++ b/arch/m68knommu/platform/532x/Makefile
@@ -8,8 +8,8 @@
# on the console port whenever a DBG interrupt occurs. You have to
# set up you HW breakpoints to trigger a DBG interrupt:
#
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
#
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
diff --git a/arch/m68knommu/platform/5407/Makefile b/arch/m68knommu/platform/5407/Makefile
index dee62c5dbaa..e83fe148edd 100644
--- a/arch/m68knommu/platform/5407/Makefile
+++ b/arch/m68knommu/platform/5407/Makefile
@@ -8,8 +8,8 @@
# on the console port whenever a DBG interrupt occurs. You have to
# set up you HW breakpoints to trigger a DBG interrupt:
#
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
#
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
diff --git a/arch/m68knommu/platform/548x/Makefile b/arch/m68knommu/platform/548x/Makefile
new file mode 100644
index 00000000000..e6035e7a2d3
--- /dev/null
+++ b/arch/m68knommu/platform/548x/Makefile
@@ -0,0 +1,18 @@
+#
+# Makefile for the m68knommu linux kernel.
+#
+
+#
+# If you want to play with the HW breakpoints then you will
+# need to add define this, which will give you a stack backtrace
+# on the console port whenever a DBG interrupt occurs. You have to
+# set up you HW breakpoints to trigger a DBG interrupt:
+#
+# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
+# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+#
+
+asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
+
+obj-y := config.o
+
diff --git a/arch/m68knommu/platform/548x/config.c b/arch/m68knommu/platform/548x/config.c
new file mode 100644
index 00000000000..9888846bd1c
--- /dev/null
+++ b/arch/m68knommu/platform/548x/config.c
@@ -0,0 +1,115 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/548x/config.c
+ *
+ * Copyright (C) 2010, Philippe De Muyter <phdm@macqel.be>
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/m548xsim.h>
+#include <asm/mcfuart.h>
+#include <asm/m548xgpt.h>
+
+/***************************************************************************/
+
+static struct mcf_platform_uart m548x_uart_platform[] = {
+ {
+ .mapbase = MCF_MBAR + MCFUART_BASE1,
+ .irq = 64 + 35,
+ },
+ {
+ .mapbase = MCF_MBAR + MCFUART_BASE2,
+ .irq = 64 + 34,
+ },
+ {
+ .mapbase = MCF_MBAR + MCFUART_BASE3,
+ .irq = 64 + 33,
+ },
+ {
+ .mapbase = MCF_MBAR + MCFUART_BASE4,
+ .irq = 64 + 32,
+ },
+};
+
+static struct platform_device m548x_uart = {
+ .name = "mcfuart",
+ .id = 0,
+ .dev.platform_data = m548x_uart_platform,
+};
+
+static struct platform_device *m548x_devices[] __initdata = {
+ &m548x_uart,
+};
+
+
+/***************************************************************************/
+
+static void __init m548x_uart_init_line(int line, int irq)
+{
+ int rts_cts;
+
+ /* enable io pins */
+ switch (line) {
+ case 0:
+ rts_cts = 0; break;
+ case 1:
+ rts_cts = MCF_PAR_PSC_RTS_RTS; break;
+ case 2:
+ rts_cts = MCF_PAR_PSC_RTS_RTS | MCF_PAR_PSC_CTS_CTS; break;
+ case 3:
+ rts_cts = 0; break;
+ }
+ __raw_writeb(MCF_PAR_PSC_TXD | rts_cts | MCF_PAR_PSC_RXD,
+ MCF_MBAR + MCF_PAR_PSC(line));
+}
+
+static void __init m548x_uarts_init(void)
+{
+ const int nrlines = ARRAY_SIZE(m548x_uart_platform);
+ int line;
+
+ for (line = 0; (line < nrlines); line++)
+ m548x_uart_init_line(line, m548x_uart_platform[line].irq);
+}
+
+/***************************************************************************/
+
+static void mcf548x_reset(void)
+{
+ /* disable interrupts and enable the watchdog */
+ asm("movew #0x2700, %sr\n");
+ __raw_writel(0, MCF_MBAR + MCF_GPT_GMS0);
+ __raw_writel(MCF_GPT_GCIR_CNT(1), MCF_MBAR + MCF_GPT_GCIR0);
+ __raw_writel(MCF_GPT_GMS_WDEN | MCF_GPT_GMS_CE | MCF_GPT_GMS_TMS(4),
+ MCF_MBAR + MCF_GPT_GMS0);
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+ mach_reset = mcf548x_reset;
+ m548x_uarts_init();
+}
+
+/***************************************************************************/
+
+static int __init init_BSP(void)
+{
+
+ platform_add_devices(m548x_devices, ARRAY_SIZE(m548x_devices));
+ return 0;
+}
+
+arch_initcall(init_BSP);
+
+/***************************************************************************/
diff --git a/arch/m68knommu/platform/68328/entry.S b/arch/m68knommu/platform/68328/entry.S
index 9d80d2c4286..27241e16a52 100644
--- a/arch/m68knommu/platform/68328/entry.S
+++ b/arch/m68knommu/platform/68328/entry.S
@@ -43,10 +43,10 @@ badsys:
jra ret_from_exception
do_trace:
- movel #-ENOSYS,%sp@(PT_OFF_D0) /* needed for strace*/
+ movel #-ENOSYS,%sp@(PT_OFF_D0) /* needed for strace*/
subql #4,%sp
SAVE_SWITCH_STACK
- jbsr syscall_trace
+ jbsr syscall_trace_enter
RESTORE_SWITCH_STACK
addql #4,%sp
movel %sp@(PT_OFF_ORIG_D0),%d1
@@ -57,10 +57,10 @@ do_trace:
lea sys_call_table, %a0
jbsr %a0@(%d1)
-1: movel %d0,%sp@(PT_OFF_D0) /* save the return value */
+1: movel %d0,%sp@(PT_OFF_D0) /* save the return value */
subql #4,%sp /* dummy return address */
SAVE_SWITCH_STACK
- jbsr syscall_trace
+ jbsr syscall_trace_leave
ret_from_signal:
RESTORE_SWITCH_STACK
@@ -71,16 +71,16 @@ ENTRY(system_call)
SAVE_ALL
/* save top of frame*/
- pea %sp@
- jbsr set_esp0
- addql #4,%sp
+ pea %sp@
+ jbsr set_esp0
+ addql #4,%sp
movel %sp@(PT_OFF_ORIG_D0),%d0
movel %sp,%d1 /* get thread_info pointer */
andl #-THREAD_SIZE,%d1
movel %d1,%a2
- btst #TIF_SYSCALL_TRACE,%a2@(TI_FLAGS)
+ btst #(TIF_SYSCALL_TRACE%8),%a2@(TI_FLAGS+(31-TIF_SYSCALL_TRACE)/8)
jne do_trace
cmpl #NR_syscalls,%d0
jcc badsys
@@ -88,10 +88,10 @@ ENTRY(system_call)
lea sys_call_table,%a0
movel %a0@(%d0), %a0
jbsr %a0@
- movel %d0,%sp@(PT_OFF_D0) /* save the return value*/
+ movel %d0,%sp@(PT_OFF_D0) /* save the return value*/
ret_from_exception:
- btst #5,%sp@(PT_OFF_SR) /* check if returning to kernel*/
+ btst #5,%sp@(PT_OFF_SR) /* check if returning to kernel*/
jeq Luser_return /* if so, skip resched, signals*/
Lkernel_return:
@@ -133,7 +133,7 @@ Lreturn:
*/
inthandler1:
SAVE_ALL
- movew %sp@(PT_OFF_VECTOR), %d0
+ movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
movel %sp,%sp@-
@@ -144,7 +144,7 @@ inthandler1:
inthandler2:
SAVE_ALL
- movew %sp@(PT_OFF_VECTOR), %d0
+ movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
movel %sp,%sp@-
@@ -155,7 +155,7 @@ inthandler2:
inthandler3:
SAVE_ALL
- movew %sp@(PT_OFF_VECTOR), %d0
+ movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
movel %sp,%sp@-
@@ -166,7 +166,7 @@ inthandler3:
inthandler4:
SAVE_ALL
- movew %sp@(PT_OFF_VECTOR), %d0
+ movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
movel %sp,%sp@-
@@ -177,7 +177,7 @@ inthandler4:
inthandler5:
SAVE_ALL
- movew %sp@(PT_OFF_VECTOR), %d0
+ movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
movel %sp,%sp@-
@@ -188,7 +188,7 @@ inthandler5:
inthandler6:
SAVE_ALL
- movew %sp@(PT_OFF_VECTOR), %d0
+ movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
movel %sp,%sp@-
@@ -199,7 +199,7 @@ inthandler6:
inthandler7:
SAVE_ALL
- movew %sp@(PT_OFF_VECTOR), %d0
+ movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
movel %sp,%sp@-
@@ -210,7 +210,7 @@ inthandler7:
inthandler:
SAVE_ALL
- movew %sp@(PT_OFF_VECTOR), %d0
+ movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
movel %sp,%sp@-
diff --git a/arch/m68knommu/platform/68328/head-de2.S b/arch/m68knommu/platform/68328/head-de2.S
index 92d96456d36..f632fdcb93e 100644
--- a/arch/m68knommu/platform/68328/head-de2.S
+++ b/arch/m68knommu/platform/68328/head-de2.S
@@ -1,11 +1,5 @@
-#if defined(CONFIG_RAM32MB)
-#define MEM_END 0x02000000 /* Memory size 32Mb */
-#elif defined(CONFIG_RAM16MB)
-#define MEM_END 0x01000000 /* Memory size 16Mb */
-#else
#define MEM_END 0x00800000 /* Memory size 8Mb */
-#endif
#undef CRT_DEBUG
diff --git a/arch/m68knommu/platform/68328/head-ram.S b/arch/m68knommu/platform/68328/head-ram.S
index 252b80b0203..7f1aeeacb21 100644
--- a/arch/m68knommu/platform/68328/head-ram.S
+++ b/arch/m68knommu/platform/68328/head-ram.S
@@ -67,33 +67,6 @@ pclp1:
beq pclp1
#endif /* DEBUG */
-#ifdef CONFIG_RELOCATE
- /* Copy me to RAM */
- moveal #__rom_start, %a0
- moveal #_stext, %a1
- moveal #_edata, %a2
-
- /* Copy %a0 to %a1 until %a1 == %a2 */
-LD1:
- movel %a0@+, %d0
- movel %d0, %a1@+
- cmpal %a1, %a2
- bhi LD1
-
-#ifdef DEBUG
- moveq #74, %d7 /* 'J' */
- moveb %d7,0xfffff907 /* No absolute addresses */
-pclp2:
- movew 0xfffff906, %d7
- andw #0x2000, %d7
- beq pclp2
-#endif /* DEBUG */
- /* jump into the RAM copy */
- jmp ram_jump
-ram_jump:
-
-#endif /* CONFIG_RELOCATE */
-
#ifdef DEBUG
moveq #82, %d7 /* 'R' */
moveb %d7,0xfffff907 /* No absolute addresses */
diff --git a/arch/m68knommu/platform/68328/ints.c b/arch/m68knommu/platform/68328/ints.c
index b91ee85d4b5..865852806a1 100644
--- a/arch/m68knommu/platform/68328/ints.c
+++ b/arch/m68knommu/platform/68328/ints.c
@@ -179,10 +179,8 @@ void __init init_IRQ(void)
IMR = ~0;
for (i = 0; (i < NR_IRQS); i++) {
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = NULL;
- irq_desc[i].depth = 1;
- irq_desc[i].chip = &intc_irq_chip;
+ set_irq_chip(irq, &intc_irq_chip);
+ set_irq_handler(irq, handle_level_irq);
}
}
diff --git a/arch/m68knommu/platform/68360/entry.S b/arch/m68knommu/platform/68360/entry.S
index 6d3460a39ca..c131c6e1d92 100644
--- a/arch/m68knommu/platform/68360/entry.S
+++ b/arch/m68knommu/platform/68360/entry.S
@@ -42,7 +42,7 @@ do_trace:
movel #-ENOSYS,%sp@(PT_OFF_D0) /* needed for strace*/
subql #4,%sp
SAVE_SWITCH_STACK
- jbsr syscall_trace
+ jbsr syscall_trace_enter
RESTORE_SWITCH_STACK
addql #4,%sp
movel %sp@(PT_OFF_ORIG_D0),%d1
@@ -56,7 +56,7 @@ do_trace:
1: movel %d0,%sp@(PT_OFF_D0) /* save the return value */
subql #4,%sp /* dummy return address */
SAVE_SWITCH_STACK
- jbsr syscall_trace
+ jbsr syscall_trace_leave
ret_from_signal:
RESTORE_SWITCH_STACK
@@ -71,7 +71,12 @@ ENTRY(system_call)
jbsr set_esp0
addql #4,%sp
- btst #PF_TRACESYS_BIT,%a2@(TASK_FLAGS+PF_TRACESYS_OFF)
+ movel %sp@(PT_OFF_ORIG_D0),%d0
+
+ movel %sp,%d1 /* get thread_info pointer */
+ andl #-THREAD_SIZE,%d1
+ movel %d1,%a2
+ btst #(TIF_SYSCALL_TRACE%8),%a2@(TI_FLAGS+(31-TIF_SYSCALL_TRACE)/8)
jne do_trace
cmpl #NR_syscalls,%d0
jcc badsys
@@ -124,7 +129,7 @@ Lreturn:
*/
inthandler:
SAVE_ALL
- movew %sp@(PT_OFF_VECTOR), %d0
+ movew %sp@(PT_OFF_FORMATVEC), %d0
and.l #0x3ff, %d0
lsr.l #0x02, %d0
diff --git a/arch/m68knommu/platform/68360/ints.c b/arch/m68knommu/platform/68360/ints.c
index 6f22970d8c2..ad96ab1051f 100644
--- a/arch/m68knommu/platform/68360/ints.c
+++ b/arch/m68knommu/platform/68360/ints.c
@@ -132,10 +132,8 @@ void init_IRQ(void)
pquicc->intr_cimr = 0x00000000;
for (i = 0; (i < NR_IRQS); i++) {
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = NULL;
- irq_desc[i].depth = 1;
- irq_desc[i].chip = &intc_irq_chip;
+ set_irq_chip(irq, &intc_irq_chip);
+ set_irq_handler(irq, handle_level_irq);
}
}
diff --git a/arch/m68knommu/platform/68VZ328/config.c b/arch/m68knommu/platform/68VZ328/config.c
index fc5c63054e9..eabaabe8af3 100644
--- a/arch/m68knommu/platform/68VZ328/config.c
+++ b/arch/m68knommu/platform/68VZ328/config.c
@@ -90,11 +90,6 @@ static void init_hardware(char *command, int size)
PDIQEG &= ~PD(1);
PDIRQEN |= PD(1); /* IRQ enabled */
-#ifdef CONFIG_68328_SERIAL_UART2
- /* Enable RXD TXD port bits to enable UART2 */
- PJSEL &= ~(PJ(5) | PJ(4));
-#endif
-
#ifdef CONFIG_INIT_LCD
/* initialize LCD controller */
LSSA = (long) screen_bits;
diff --git a/arch/m68knommu/platform/coldfire/Makefile b/arch/m68knommu/platform/coldfire/Makefile
index f72a0e5d999..45f501fa452 100644
--- a/arch/m68knommu/platform/coldfire/Makefile
+++ b/arch/m68knommu/platform/coldfire/Makefile
@@ -8,8 +8,8 @@
# on the console port whenever a DBG interrupt occurs. You have to
# set up you HW breakpoints to trigger a DBG interrupt:
#
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
#
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
@@ -26,6 +26,7 @@ obj-$(CONFIG_M528x) += pit.o intc-2.o
obj-$(CONFIG_M5307) += timers.o intc.o
obj-$(CONFIG_M532x) += timers.o intc-simr.o
obj-$(CONFIG_M5407) += timers.o intc.o
+obj-$(CONFIG_M548x) += sltimers.o intc-2.o
obj-y += pinmux.o gpio.o
extra-y := head.o
diff --git a/arch/m68knommu/platform/coldfire/entry.S b/arch/m68knommu/platform/coldfire/entry.S
index cd79d7e92ce..5e92bed94b7 100644
--- a/arch/m68knommu/platform/coldfire/entry.S
+++ b/arch/m68knommu/platform/coldfire/entry.S
@@ -88,7 +88,7 @@ ENTRY(system_call)
movel %d2,PT_OFF_D0(%sp) /* on syscall entry */
subql #4,%sp
SAVE_SWITCH_STACK
- jbsr syscall_trace
+ jbsr syscall_trace_enter
RESTORE_SWITCH_STACK
addql #4,%sp
movel %d3,%a0
@@ -96,7 +96,7 @@ ENTRY(system_call)
movel %d0,%sp@(PT_OFF_D0) /* save the return value */
subql #4,%sp /* dummy return address */
SAVE_SWITCH_STACK
- jbsr syscall_trace
+ jbsr syscall_trace_leave
ret_from_signal:
RESTORE_SWITCH_STACK
diff --git a/arch/m68knommu/platform/coldfire/intc-2.c b/arch/m68knommu/platform/coldfire/intc-2.c
index 5598c8b8661..85daa2b3001 100644
--- a/arch/m68knommu/platform/coldfire/intc-2.c
+++ b/arch/m68knommu/platform/coldfire/intc-2.c
@@ -1,5 +1,11 @@
/*
- * intc-1.c
+ * intc-2.c
+ *
+ * General interrupt controller code for the many ColdFire cores that use
+ * interrupt controllers with 63 interrupt sources, organized as 56 fully-
+ * programmable + 7 fixed-level interrupt sources. This includes the 523x
+ * family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
+ * controllers, and the 547x and 548x families which have only one of them.
*
* (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
*
@@ -19,21 +25,37 @@
#include <asm/traps.h>
/*
- * Each vector needs a unique priority and level asscoiated with it.
+ * Bit definitions for the ICR family of registers.
+ */
+#define MCFSIM_ICR_LEVEL(l) ((l)<<3) /* Level l intr */
+#define MCFSIM_ICR_PRI(p) (p) /* Priority p intr */
+
+/*
+ * Each vector needs a unique priority and level associated with it.
* We don't really care so much what they are, we don't rely on the
- * tranditional priority interrupt scheme of the m68k/ColdFire.
+ * traditional priority interrupt scheme of the m68k/ColdFire.
*/
-static u8 intc_intpri = 0x36;
+static u8 intc_intpri = MCFSIM_ICR_LEVEL(6) | MCFSIM_ICR_PRI(6);
+
+#ifdef MCFICM_INTC1
+#define NR_VECS 128
+#else
+#define NR_VECS 64
+#endif
static void intc_irq_mask(unsigned int irq)
{
- if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + 128)) {
+ if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + NR_VECS)) {
unsigned long imraddr;
u32 val, imrbit;
irq -= MCFINT_VECBASE;
imraddr = MCF_IPSBAR;
+#ifdef MCFICM_INTC1
imraddr += (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
+#else
+ imraddr += MCFICM_INTC0;
+#endif
imraddr += (irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL;
imrbit = 0x1 << (irq & 0x1f);
@@ -44,13 +66,17 @@ static void intc_irq_mask(unsigned int irq)
static void intc_irq_unmask(unsigned int irq)
{
- if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + 128)) {
+ if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + NR_VECS)) {
unsigned long intaddr, imraddr, icraddr;
u32 val, imrbit;
irq -= MCFINT_VECBASE;
intaddr = MCF_IPSBAR;
+#ifdef MCFICM_INTC1
intaddr += (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
+#else
+ intaddr += MCFICM_INTC0;
+#endif
imraddr = intaddr + ((irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL);
icraddr = intaddr + MCFINTC_ICR0 + (irq & 0x3f);
imrbit = 0x1 << (irq & 0x1f);
@@ -67,10 +93,16 @@ static void intc_irq_unmask(unsigned int irq)
}
}
+static int intc_irq_set_type(unsigned int irq, unsigned int type)
+{
+ return 0;
+}
+
static struct irq_chip intc_irq_chip = {
.name = "CF-INTC",
.mask = intc_irq_mask,
.unmask = intc_irq_unmask,
+ .set_type = intc_irq_set_type,
};
void __init init_IRQ(void)
@@ -81,13 +113,14 @@ void __init init_IRQ(void)
/* Mask all interrupt sources */
__raw_writel(0x1, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
+#ifdef MCFICM_INTC1
__raw_writel(0x1, MCF_IPSBAR + MCFICM_INTC1 + MCFINTC_IMRL);
+#endif
for (irq = 0; (irq < NR_IRQS); irq++) {
- irq_desc[irq].status = IRQ_DISABLED;
- irq_desc[irq].action = NULL;
- irq_desc[irq].depth = 1;
- irq_desc[irq].chip = &intc_irq_chip;
+ set_irq_chip(irq, &intc_irq_chip);
+ set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+ set_irq_handler(irq, handle_level_irq);
}
}
diff --git a/arch/m68knommu/platform/coldfire/intc-simr.c b/arch/m68knommu/platform/coldfire/intc-simr.c
index 1b01e79c2f6..bb704863614 100644
--- a/arch/m68knommu/platform/coldfire/intc-simr.c
+++ b/arch/m68knommu/platform/coldfire/intc-simr.c
@@ -1,6 +1,8 @@
/*
* intc-simr.c
*
+ * Interrupt controller code for the ColdFire 5208, 5207 & 532x parts.
+ *
* (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -68,11 +70,9 @@ void __init init_IRQ(void)
__raw_writeb(0xff, MCFINTC1_SIMR);
for (irq = 0; (irq < NR_IRQS); irq++) {
- irq_desc[irq].status = IRQ_DISABLED;
- irq_desc[irq].action = NULL;
- irq_desc[irq].depth = 1;
- irq_desc[irq].chip = &intc_irq_chip;
- intc_irq_set_type(irq, 0);
+ set_irq_chip(irq, &intc_irq_chip);
+ set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+ set_irq_handler(irq, handle_level_irq);
}
}
diff --git a/arch/m68knommu/platform/coldfire/intc.c b/arch/m68knommu/platform/coldfire/intc.c
index a4560c86db7..60d2fcbe182 100644
--- a/arch/m68knommu/platform/coldfire/intc.c
+++ b/arch/m68knommu/platform/coldfire/intc.c
@@ -143,11 +143,9 @@ void __init init_IRQ(void)
mcf_maskimr(0xffffffff);
for (irq = 0; (irq < NR_IRQS); irq++) {
- irq_desc[irq].status = IRQ_DISABLED;
- irq_desc[irq].action = NULL;
- irq_desc[irq].depth = 1;
- irq_desc[irq].chip = &intc_irq_chip;
- intc_irq_set_type(irq, 0);
+ set_irq_chip(irq, &intc_irq_chip);
+ set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+ set_irq_handler(irq, handle_level_irq);
}
}
diff --git a/arch/m68knommu/platform/coldfire/sltimers.c b/arch/m68knommu/platform/coldfire/sltimers.c
new file mode 100644
index 00000000000..0a1b937c3e1
--- /dev/null
+++ b/arch/m68knommu/platform/coldfire/sltimers.c
@@ -0,0 +1,145 @@
+/***************************************************************************/
+
+/*
+ * sltimers.c -- generic ColdFire slice timer support.
+ *
+ * Copyright (C) 2009-2010, Philippe De Muyter <phdm@macqel.be>
+ * based on
+ * timers.c -- generic ColdFire hardware timer support.
+ * Copyright (C) 1999-2008, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/profile.h>
+#include <linux/clocksource.h>
+#include <asm/io.h>
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfslt.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+
+#ifdef CONFIG_HIGHPROFILE
+
+/*
+ * By default use Slice Timer 1 as the profiler clock timer.
+ */
+#define PA(a) (MCF_MBAR + MCFSLT_TIMER1 + (a))
+
+/*
+ * Choose a reasonably fast profile timer. Make it an odd value to
+ * try and get good coverage of kernel operations.
+ */
+#define PROFILEHZ 1013
+
+irqreturn_t mcfslt_profile_tick(int irq, void *dummy)
+{
+ /* Reset Slice Timer 1 */
+ __raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, PA(MCFSLT_SSR));
+ if (current->pid)
+ profile_tick(CPU_PROFILING);
+ return IRQ_HANDLED;
+}
+
+static struct irqaction mcfslt_profile_irq = {
+ .name = "profile timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = mcfslt_profile_tick,
+};
+
+void mcfslt_profile_init(void)
+{
+ printk(KERN_INFO "PROFILE: lodging TIMER 1 @ %dHz as profile timer\n",
+ PROFILEHZ);
+
+ setup_irq(MCF_IRQ_PROFILER, &mcfslt_profile_irq);
+
+ /* Set up TIMER 2 as high speed profile clock */
+ __raw_writel(MCF_BUSCLK / PROFILEHZ - 1, PA(MCFSLT_STCNT));
+ __raw_writel(MCFSLT_SCR_RUN | MCFSLT_SCR_IEN | MCFSLT_SCR_TEN,
+ PA(MCFSLT_SCR));
+
+}
+
+#endif /* CONFIG_HIGHPROFILE */
+
+/***************************************************************************/
+
+/*
+ * By default use Slice Timer 0 as the system clock timer.
+ */
+#define TA(a) (MCF_MBAR + MCFSLT_TIMER0 + (a))
+
+static u32 mcfslt_cycles_per_jiffy;
+static u32 mcfslt_cnt;
+
+static irqreturn_t mcfslt_tick(int irq, void *dummy)
+{
+ /* Reset Slice Timer 0 */
+ __raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, TA(MCFSLT_SSR));
+ mcfslt_cnt += mcfslt_cycles_per_jiffy;
+ return arch_timer_interrupt(irq, dummy);
+}
+
+static struct irqaction mcfslt_timer_irq = {
+ .name = "timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = mcfslt_tick,
+};
+
+static cycle_t mcfslt_read_clk(struct clocksource *cs)
+{
+ unsigned long flags;
+ u32 cycles;
+ u16 scnt;
+
+ local_irq_save(flags);
+ scnt = __raw_readl(TA(MCFSLT_SCNT));
+ cycles = mcfslt_cnt;
+ local_irq_restore(flags);
+
+ /* substract because slice timers count down */
+ return cycles - scnt;
+}
+
+static struct clocksource mcfslt_clk = {
+ .name = "slt",
+ .rating = 250,
+ .read = mcfslt_read_clk,
+ .shift = 20,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void hw_timer_init(void)
+{
+ mcfslt_cycles_per_jiffy = MCF_BUSCLK / HZ;
+ /*
+ * The coldfire slice timer (SLT) runs from STCNT to 0 included,
+ * then STCNT again and so on. It counts thus actually
+ * STCNT + 1 steps for 1 tick, not STCNT. So if you want
+ * n cycles, initialize STCNT with n - 1.
+ */
+ __raw_writel(mcfslt_cycles_per_jiffy - 1, TA(MCFSLT_STCNT));
+ __raw_writel(MCFSLT_SCR_RUN | MCFSLT_SCR_IEN | MCFSLT_SCR_TEN,
+ TA(MCFSLT_SCR));
+ /* initialize mcfslt_cnt knowing that slice timers count down */
+ mcfslt_cnt = mcfslt_cycles_per_jiffy;
+
+ setup_irq(MCF_IRQ_TIMER, &mcfslt_timer_irq);
+
+ mcfslt_clk.mult = clocksource_hz2mult(MCF_BUSCLK, mcfslt_clk.shift);
+ clocksource_register(&mcfslt_clk);
+
+#ifdef CONFIG_HIGHPROFILE
+ mcfslt_profile_init();
+#endif
+}